Optimised synthesis of ZnO-nano-fertiliser through green chemistry: boosted growth dynamics of economically important L. esculentum.

Science.gov (United States)

Jabeen, Nyla; Maqbool, Qaisar; Bibi, Tahira; Nazar, Mudassar; Hussain, Syed Z; Hussain, Talib; Jan, Tariq; Ahmad, Ishaq; Maaza, Malik; Anwaar, Sadaf

2018-06-01

Mounting-up economic losses to annual crops yield due to micronutrient deficiency, fertiliser inefficiency and increasing microbial invasions (e.g. Xanthomonas cempestri attack on tomatoes) are needed to be solved via nano-biotechnology. So keeping this in view, the authors' current study presents the new horizon in the field of nano-fertiliser with highly nutritive and preservative effect of green fabricated zinc oxide-nanostructures (ZnO-NSs) during Lycopersicum esculentum (tomato) growth dynamics. ZnO-NS prepared via green chemistry possesses highly homogenous crystalline structures well-characterised through ultraviolet and visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscope. The ZnO-NS average size was found as small as 18 nm having a crystallite size of 5 nm. L. esculentum were grown in different concentrations of ZnO-NS to examine the different morphological parameters includes time of seed germination, germination percentage, the number of plant leaves, the height of the plant, average number of branches, days count for flowering and fruiting time period along with fruit quantity. Promising results clearly predict that bio-fabricated ZnO-NS at optimum concentration resulted as growth booster and dramatically triggered the plant yield.

El tiro libre en baloncesto: Aciertos en cada minuto de juego

OpenAIRE

L??pez Guti??rrez, Carlos Javier; Jim??nez-Torres, Manuel G.

2013-01-01

Se presenta un an??lisis descriptivo del tiro libre producido en 74 partidos de baloncesto de la categor??a ACB. Se han contabilizado el n??mero de tiros libres lanzados por el equipo local y visitante y el porcentaje de aciertos en cada minuto de juego. Los resultados indican que, a medida que transcurren los minutos de juego, se incrementa el n??mero de lanzamientos de tiros libres. Destaca sobre todos el ??ltimo cuarto en cuanto a producci??n de tiros libres. En las pr??rrogas, los equipos...

Bridging “green gap” of LEDs: Giant light output enhancement and directional control of LEDs via embedded nano-void photonic crystals

KAUST Repository

Tsai, Yu-Lin

2015-11-23

Green LEDs do not show the same level of performance as their blue and red cousins, greatly hindering the solid-state lighting development, which is so-called “green gap”. In this work, nano-void photonic crystals (NVPCs) were fabricated to embed within the GaN/InGaN green LEDs by using epitaxial lateral overgrowth (ELO) and nano-sphere lithography techniques. The NVPCs act as an efficient scattering back-reflector to outcouple the guided and downward photons, which not only boosting light extraction efficiency of LEDs with an enhancement of 78% but also collimating the view angle of LEDs from 131.5゜to 114.0゜. This could be because the highly scattering nature of NVPCs which reduce the interference giving rise to Fabry-Perot resonance. Moreover, due to the threading dislocation suppression and strain relief by the NVPCs, the internal quantum efficiency was increased by 25% and droop behavior was reduced from 37.4% to 25.9%. The enhancement of light output power can be achieved as high as 151% at a driving current of 350 mA. Giant light output enhancement and directional control via NVPCs points the way towards a promising avenue of solid-state lighting.

Bridging “green gap” of LEDs: Giant light output enhancement and directional control of LEDs via embedded nano-void photonic crystals

KAUST Repository

Tsai, Yu-Lin; Liu, Che-Yu; Krishnan, Chirenjeevi; Lin, Da-Wei; Chu, You-Chen; Chen, Tzu-Pei; Shen, Tien-Lin; Kao, Tsung-Sheng; Charlton, Martin; Yu, Peichen; Lin, Chien-Chung; Kuo, Hao-Chung; He, Jr-Hau

2015-01-01

Green LEDs do not show the same level of performance as their blue and red cousins, greatly hindering the solid-state lighting development, which is so-called “green gap”. In this work, nano-void photonic crystals (NVPCs) were fabricated to embed within the GaN/InGaN green LEDs by using epitaxial lateral overgrowth (ELO) and nano-sphere lithography techniques. The NVPCs act as an efficient scattering back-reflector to outcouple the guided and downward photons, which not only boosting light extraction efficiency of LEDs with an enhancement of 78% but also collimating the view angle of LEDs from 131.5゜to 114.0゜. This could be because the highly scattering nature of NVPCs which reduce the interference giving rise to Fabry-Perot resonance. Moreover, due to the threading dislocation suppression and strain relief by the NVPCs, the internal quantum efficiency was increased by 25% and droop behavior was reduced from 37.4% to 25.9%. The enhancement of light output power can be achieved as high as 151% at a driving current of 350 mA. Giant light output enhancement and directional control via NVPCs points the way towards a promising avenue of solid-state lighting.

Influence of LiBr on photoluminescence properties of porous silicon

Energy Technology Data Exchange (ETDEWEB)

Dimassi, W., E-mail: dimassi_inrst@yahoo.f [Laboratoire de Photovoltaique, Centre de Recherches et des Technologies de l' Energie, Technopole de Borj-Cedria, BP 95 Hammam-Lif 2050 (Tunisia); Haddadi, I.; Bousbih, R.; Slama, S.; Ali Kanzari, M.; Bouaicha, M.; Ezzaouia, H. [Laboratoire de Photovoltaique, Centre de Recherches et des Technologies de l' Energie, Technopole de Borj-Cedria, BP 95 Hammam-Lif 2050 (Tunisia)

2011-05-15

A new method has been developed to improve the photoluminescence intensity of porous silicon (PS), which is first time that LiBr is used for passivation of PS. Immersion of the PS in a LiBr solution, followed by a thermal treatment at 100 {sup o}C for 30 min under nitrogen, leads to a nine fold increase in the intensity of the photoluminescence. The atomic force microscope (AFM) shows an increase of the nanoparticle dimension compared to the initial dimension of the PS nanostructure. The LiBr covers the nanoparticles of silicon without changing the wavelength distribution of the optical excitation and emission spectra. Moreover, a significant decrease of reflectivity was observed for the wavelength in the range of 350-500 nm. - Research highlights: {yields} A new method based on the use of LiBr was developed to enhance nine times the photoluminescence of porous silicon. {yields} The LiBr covers the silicon nanoparticles without changing in the optical excitation and emission spectra. {yields} We observed a significant decrease of the reflectivity in the 350-500 nm spectral range.

Influence of LiBr on photoluminescence properties of porous silicon

International Nuclear Information System (INIS)

Dimassi, W.; Haddadi, I.; Bousbih, R.; Slama, S.; Ali Kanzari, M.; Bouaicha, M.; Ezzaouia, H.

2011-01-01

A new method has been developed to improve the photoluminescence intensity of porous silicon (PS), which is first time that LiBr is used for passivation of PS. Immersion of the PS in a LiBr solution, followed by a thermal treatment at 100 o C for 30 min under nitrogen, leads to a nine fold increase in the intensity of the photoluminescence. The atomic force microscope (AFM) shows an increase of the nanoparticle dimension compared to the initial dimension of the PS nanostructure. The LiBr covers the nanoparticles of silicon without changing the wavelength distribution of the optical excitation and emission spectra. Moreover, a significant decrease of reflectivity was observed for the wavelength in the range of 350-500 nm. - Research highlights: → A new method based on the use of LiBr was developed to enhance nine times the photoluminescence of porous silicon. → The LiBr covers the silicon nanoparticles without changing in the optical excitation and emission spectra. → We observed a significant decrease of the reflectivity in the 350-500 nm spectral range.

Estudio comparativo entre SIG propietario y SIG libre

OpenAIRE

Mesa Díaz, Juan Ramón

2008-01-01

Estudio comparativo entre SIG propietario y SIG libre, focalizado en los casos particulares de Geomedia Pro (SIG Propietario) y gvSIG (SIG Libre). En el estudio se procede a determinar cuáles son los aspectos destacables de un SIG, para poder evaluarlos, posteriormente, en los dos SIG objeto del estudio y obtener una ponderación definitoria de cada SIG. A continuación, algunos de los aspectos evaluados en cada SIG: interoperabilidad, conexión a bases de datos espaciales, aspectos económ...

Hackers: de piratas a defensores del software libre

OpenAIRE

Jorge Lizama Mendoza

2002-01-01

El presente artículo consta de dos partes: en la primera se ofrecen argumentos que permiten definir a los hackers como un grupo de expertos en informática que, mediante la práctica de unos principios éticos tales como el acceso a las computadoras debe ser libre, Crea software y compártelo con la comunidad internet; han inaugurado una nueva dinámica de trabajo entre los usuarios de la red para desarrollar software libre. En la segunda parte se analiza la historia de Linux, un si...

Detection of malachite green in fish based on magnetic fluorescent probe of CdTe QDs/nano-Fe3O4@MIPs

Science.gov (United States)

Wu, Le; Lin, Zheng-Zhong; Zeng, Jun; Zhong, Hui-Ping; Chen, Xiao-Mei; Huang, Zhi-Yong

2018-05-01

A magnetic fluorescent probe of CdTe QDs/nano-Fe3O4@MIPs was prepared using CdTe QDs and Fe3O4 nanoparticles as co-nucleus and molecularly imprinted polymers (MIPs) as specific recognition sites based on a reverse microemulsion method. With the specific enrichment and magnetic separation properties, the probe of CdTe QDs/nano-Fe3O4@MIPs was used to detect malachite green (MG) in fish samples. The TEM analysis showed that the particles of CdTe QDs/nano-Fe3O4@MIPs were spherical with average diameter around 53 nm, and a core-shell structure was well-shaped with several Fe3O4 nanoparticles and CdTe QDs embedded in each of the microsphere. Quick separation of the probes from solutions could be realized with a magnet, indicating the excellent magnetic property of CdTe QDs/nano-Fe3O4@MIPs. The probe exhibited high specific adsorption towards MG and excellent fluorescence emission at λem 598 nm. The fluorescence of CdTe QDs/nano-Fe3O4@MIPs could be linearly quenched by MG at the concentrations from 0.025 to 1.5 μmol L-1. The detection limit was 0.014 μmol L-1. The average recovery of spiked MG in fish samples was 105.2%. The result demonstrated that the as-prepared CdTe QDs/nano-Fe3O4@MIPs could be used as a probe to the detection of trace MG in fish samples.

Synthesis and characterization of superionic (LiBr)_0_._5(AlSiO)_0_._5

International Nuclear Information System (INIS)

Aziz K Jahja; Safei Purnama

2010-01-01

Materials of LiBr silicate aluminum ionic conductor have been prepared by powder metallurgy method in which 0.5 mole of LiBr powder is mixed with about 0.5 mole silicate aluminum in liquid medium of aquadest. After mixing and homogenization, the samples are dried, compacted and heated at 600 °C for 1 hour. Characterization of materials structure was carried out by X-Ray diffraction, ionic conductivity was measured by LCR meter with frequency range of 10"-"1 to 10"5 Hz at room temperature. Results of measurement show the (LiBr)_0_._5(AlSiO)_0_._5 conductor has the structure of both LiBr and of silicate aluminum. (LiBr)_0_._5(AlSiO)_0_._5 has the highest ionic conductivity in the order of 10"-"3 S.cm"-"1 while the ionic conductivity of LiBr is found to be about 10"-"4 S.cm"-"1 and that of silicate aluminum is about 10"-"6 S.cm"-"1, all measured at room temperature. (author)

Hydrogen-bonded structure in highly concentrated aqueous LiBr solutions

International Nuclear Information System (INIS)

Imano, Masahiro; Kameda, Yasuo; Usuki, Takeshi; Uemura, Osamu

2001-01-01

Neutron diffraction measurements were carried out for H/D isotopically substituted aqueous 10, 25 and 33 mol% LiBr solutions in order to obtain structural information on the intermolecular hydrogen bonds among water molecules in highly concentrated aqueous solutions. Observed scattering cross sections for D 2 O (99.9 % D), 0 H 2 O(35.9 % D) and 0-2 H 2 O(68.0 % D) solutions were combined to deduce partial structure factors, a HH (Q), a XH (Q) and a XX (Q) (X: O, Br and Li). The least squares fitting analysis was applied to the observed partial structure factors to determine the nearest neighbor interatomic distance, root-mean-square amplitude and coordination number. Intermolecular distances, r OH =1.91(1) A, r HH =2.38(1) A and r OO =3.02(1) A, between the nearest neighbor water molecules, were obtained for the 10 mol% LiBr solution. On the other hand, the intermolecular O···H interaction was found to almost disappear in concentrated 25 and 33 mol% LiBr solutions. The result implies that the hydrogen-bonded network is completely broken in highly concentrated aqueous LiBr solutions. (author)

Micro and nano-structured green gallium indium nitride/gallium nitride light-emitting diodes

Science.gov (United States)

Stark, Christoph J. M.

Light-emitting diodes (LEDs) are commonly designed and studied based on bulk material properties. In this thesis different approaches based on patterns in the nano and micrometer length scale range are used to tackle low efficiency in the green spectral region, which is known as “green gap”. Since light generation and extraction are governed by microscopic processes, it is instructive to study LEDs with lateral mesa sizes scaled to the nanometer range. Besides the well-known case of the quantum size effect along the growth direction, a continuous lateral scaling could reveal the mechanisms behind the purported absence of a green gap in nanowire LEDs and the role of their extraction enhancement. Furthermore the possibility to modulate strain and piezoelectric polarization by post growth patterning is of practical interest, because the internal electric fields in conventional wurtzite GaN LEDs cause performance problems. A possible alternative is cubic phase GaN, which is free of built-in polarization fields. LEDs on cubic GaN could show the link between strong polarization fields and efficiency roll-off at high current densities, also known as droop. An additional problem for all nitride-based LEDs is efficient light extraction. For a planar GaN LED only roughly 8% of the generated light can be extracted. Novel lightextraction structures with extraction-favoring geometry can yield significant increase in light output power. To investigate the effect of scaling the mesa dimension, micro and nano-sized LED arrays of variable structure size were fabricated. The nano-LEDs were patterned by electron beam lithography and dry etching. They contained up to 100 parallel nano-stripe LEDs connected to one common contact area. The mesa width was varied over 1 μm, 200 nm, and 50 nm. These LEDs were characterized electrically and optically, and the peak emission wavelength was found to depend on the lateral structure size. An electroluminescence (EL) wavelength shift of 3 nm

MECANISMOS Y LIBRE ALBEDRÍO

Directory of Open Access Journals (Sweden)

Alberto Castillo Vicci

1999-01-01

Full Text Available Se propone el test mayziano como prueba alternativa al test de turing (una prueba crítica de la inteligenica artificial. Segun el test mayziano, una máquina tendrá autoconciencia, y por lo tanto pensamiento, si goza de libre albebrío, y es capaz de fijarse fines distintos a los que tiene programados, de manera autarquica, autónoma y espontaneamente, aunque niegue sus sustentaculos. En este artículo se argumenta que, aun para una máquina con los superpoderes del demonio laplaciano (todo el conocimiento científico, le es imposible elegir sus futuros estados sustituyendo decisiones por predicciones; por que con ello contradiría tanto los teoremas de limitacion de Godel, como la imposibilidad de la autopredicción demostrada por Popper, en su bien sustentada refutación al determinismo científico. Por lo tanto no goza de una libertad autentica ni de libre albedrío, cuando se compra con la experiencia de la libertad humana. Y, en consecuencia, no puede pasar el test mayziano ni pensar

Hackers: de piratas a defensores del software libre

Directory of Open Access Journals (Sweden)

Jorge Lizama Mendoza

2002-01-01

Full Text Available El presente artículo consta de dos partes: en la primera se ofrecen argumentos que permiten definir a los hackers como un grupo de expertos en informática que, mediante la práctica de unos principios éticos tales como “el acceso a las computadoras debe ser libre”, “Crea software y compártelo con la comunidad internet”; han inaugurado una nueva dinámica de trabajo entre los usuarios de la red para desarrollar software libre. En la segunda parte se analiza la historia de Linux, un sistema operativo gratuito que busca competir con las generaciones Windows de Microsoft, a fin de proporcionar un ejemplo de cómo se desarrolla la cultura hacker a través del trabajo colectivo, la innovación tecnológica y la economía regalo. El trabajo cierra con una referencia al proyecto del e-México, proponiendo que los hackers y el software libre (Linux podrían generar una nueva cultura de apropiación y usos tecnológicos para el país.

Green chemical incorporation of sulphate into polyoxoanions of ...

Indian Academy of Sciences (India)

Green chemical incorporation of sulphate into polyoxoanions of molybdenum to nano level ... Keywords. Polyoxometalate; green synthesis; nanostructures; surfactant. ... The effects of reaction parameters such as concentration of surfactant, temperature and pH of solution on the synthesis of nanospheres were investigated.

LIBRE Model: Engagement Styles in Counseling

Science.gov (United States)

Guerra, Norma S.

2007-01-01

Engagement is essential for the processing of information. It is presented here as 2 points along a continuum: initial attention (primary self-presentation) and sustained attention (continued self-regulation). The LIBRE (Listen, Identify, Brainstorm, Reality Test, Encourage) Stick Figure Tool (N. S. Guerra, 2003) provides a graphic organizer for…

Zinc Oxide Nano crystals Synthesized by Quenching Technique

International Nuclear Information System (INIS)

Norhayati Abu Bakar; Akrajas Ali Umar; Muhamad Mat Salleh; Muhammad Yahya

2011-01-01

This paper reports an attempt to synthesize non toxic zinc oxide (ZnO) nano crystals using a simple quenching technique. The hot zinc oxide powder was quenched in hexane solution to obtain ZnO nano crystals. As the result, diameter size of the synthesized ZnO is 200 nm. It was also exhibited a good crystalline with wurtzite phase. The nano crystals properties of ZnO were revealed from good absorbance and green luminescence under UV exposure. This may be related with oxygen vacancy ionization during the annealing process. (author)

A facile method to prepare "green" nano-phosphors with a large Stokes-shift and solid-state enhanced photophysical properties based on surface-modified gold nanoclusters.

Science.gov (United States)

Cheng, C H; Huang, H Y; Talite, M J; Chou, W C; Yeh, J M; Yuan, C T

2017-12-15

Colloidal nano-materials, such as quantum dots (QDs) have been applied to light-conversion nano-phosphors due to their unique tunable emission. However, most of the QDs involve toxic elements and are synthesized in a hazardous solvent. In addition, conventional QD nano-phosphors with a small Stokes shift suffered from reabsorption losses and aggregation-induced quenching in the solid state. Here, we demonstrate a facile, matrix-free method to prepare eco-friendly nano-phosphors with a large Stokes shift based on aqueous thiolate-stabilized gold nanoclusters (GSH-AuNCs) with simple surface modifications. Our method is just to drop GSH-AuNCs solution on the aluminum foil and then surface-modified AuNCs (Al-GSH-AuNCs) can be spontaneously precipitated out of the aqueous solution. Compared with pristine GSH-AuNCs in solution, the Al-GSH-AuNCs exhibit enhanced solid-state PL quantum yields, lengthened PL lifetime, and spectral blue shift, which can be attributed to the aggregation-induced emission enhancement facilitated by surface modifications. Such surface-treatment induced aggregation of AuNCs can restrict the surface-ligand motion, leading to the enhancement of PL properties in the solid state. In addition, the Al-GSH-AuNCs nano-phosphors with a large Stokes shift can mitigate the aggregation-induced PL quenching and reabsorption losses, which would be potential candidates for "green" nano-phosphors. Copyright © 2017 Elsevier Inc. All rights reserved.

Teatro al aire libre

Directory of Open Access Journals (Sweden)

Philippe Canac

2016-11-01

Full Text Available Siendo cada vez más frecuentes y numerosas las peregrinaciones a la basílica de Notre Dame, de Laus (Altos Alpes, su capacidad resultaba hace tiempo insuficiente para acoger a sus peregrinos. Este fue el motivo de crear, en un terreno situado ante el atrio de la basílica, un conjunto, que permitiese celebrar misas al aire libre, ceremonias litúrgicas o representaciones de teatro religioso y que dispusiese de todas las posibilidades para conseguir la libertad del juego escénico.

DVD-d. Nacho Libre. Tipptund 3 / Andres Laasik

Index Scriptorium Estoniae

Laasik, Andres, 1960-2016

2008-01-01

Lühiarvustused DVD-l levitatavatest filmidest "Nacho Libre" : režissöör Jared Hess : Ameerika Ühendriigid 2006 ja "Tipptund 3" (Rush Hour 3") : režissöör Brett Ratner : Ameerika Ühendriigid 2007

Nano crystals-Related Synthesis, Assembly, and Energy Applications

International Nuclear Information System (INIS)

Dai, Q.; Hu, M.Z.; Yu, B.Z.; William, W.; Seo, J.

2011-01-01

Fundamental material properties have been dramatically altered in the nano scale regime because of quantum confinement effect. The unique size-tunable functionalities of nano materials make them involved in an extensive variety of energy applications, such as light-emitting diodes and solar cells. These applications have been demonstrated to cut energy consumption. In response to the ever-growing energy demands as well as the concerns of global warming, researchers are actively placing their enormous emphasis on the exploration of energy savings. During this exploration, the primary stage requires the design of appropriate strategies for the synthesis of high-quality nano crystals in terms of size uniformity and superior optical/electronic properties. Especially, there is a need to seek green-chemistry approaches for the synthesis of environmentally benign and user-friendly nano crystals. Another recent area of focus is the use of individual nano crystals as building blocks for self-assembly, providing new opportunities to improve the nano crystal performance

Corrosion and passivation behavior of various stainless steels in libr solution used in absorption-type refrigeration system

International Nuclear Information System (INIS)

Shahid, M.

2007-01-01

Various structural materials have been suggested for the refrigeration units to combat high corrosiveness of the absorbent. The corrosion behavior of three grades of austenitic stainless steels, have been investigated in lithium bromide (LiBr) solutions, using electrochemical techniques. Potentiodynamic E- log-i curves, potential-time scans and polarization resistance diagrams obtained by using three-electrode system connected to a computerized Gamry at the rate framework, have been used to analyze their corrosion and passivation behavior in various concentrations of LiBr i.e. commercial LiBr (850 g/J solution containing chromate inhibitor), 400 g/l LiBr and 700 g/J LiBr solutions, at room temperature. Relatively higher corrosion current was observed in SS304 exposed to inhibitor-free electrolyte compared to inhibited commercial solution. Inhibitor proved to be more efficient in case of AISI 304 as it showed significantly higher corrosion rate in un-inhibited solutions. (author)

Synthetically modified nano-cellulose for the removal of chromium: a green nanotech perspective.

Science.gov (United States)

Jain, Priyanka; Varshney, Shilpa; Srivastava, Shalini

2017-02-01

Existing processes for the decontamination of heavy metals from water are found to be cost-prohibitive and energy-intensive which is totally against the sustainable concept of development. Green nanotechnology for water purification for ecosystem management, agricultural and industry is an emerging as leading global priority and occupies better position over the current state of water purification. Herein, the diafunctionalised polyaniline modified nanocellulose composite sorbent (PANI-NCC) has been used to introduce amine and imine functionalities for the removal of trivalent and hexavalent chromium from water bodies. The fabricated nanobiomaterial has been authenticated by modern spectroscopic, microscopic techniques. The modified PANI-NCC is rod-like in shape, ~60 nm in size. The roughness and crystallinity index is also quantified and found to be 49.67 nm and 84.18%, respectively. The optimised experimental finding provides the efficient removal of trivalent [Cr(III)] (47.06 mg/g; 94.12%) and hexavalent [Cr(VI)] (48.92 mg/g; 97.84%) chromium from synthetic waste water. The fabricated nano biosorbent is deemed to be a potent biosorbent for technological development to remove the toxic metals in the real environmental water samples.

Novel Green Synthesis and Characterization of Nanopolymer ...

African Journals Online (AJOL)

Purpose: To develop a novel approach to green synthesis of nano-polymer porous gold ... underline their important uses in various fields ... enhances physical and chemical characteristics .... Nanoporous Materials: Science and Engineering.

Piper-betle-shaped nano-S-catalyzed synthesis of 1-amidoalkyl-2-naphthols under solvent-free reaction condition: a greener "nanoparticle-catalyzed organic synthesis enhancement" approach.

Science.gov (United States)

Das, Vijay K; Borah, Madhurjya; Thakur, Ashim J

2013-04-05

Nano-S prepared by an annealing process showed excellent catalytic activity for the synthesis of 1-amidoalkyl-2-naphthols under solvent-free reaction condition at 50 °C. The catalyst could be reused up to the fifth cycle without loss in its action. The green-ness of the present protocol was also measured using green metrics drawing its superiority.

Taller de Software Libre para el diseño de materiales

OpenAIRE

Álvarez Navia, Iván

2008-01-01

Materiales de clase: 1.Tema 1: Introducción al Software Libre; 2. Tema 2: Sistema GNU/Linux: Instalación de la distribución OpenSuse 11.1; 3. Tema 3: El escritorio en GNU/Linux: Introducción al sistema X-Window, GNOME, KDE yOpenOffice; 4. Tema 4: Administración avanzada de OpenSuse con Yast. El objetivo fundamental del taller consiste en adquirir soltura en la instalación, administración y utilización de Software Libre disponible en el ámbito educativo. Así mismo se proporciona una visión ...

MECANISMOS Y LIBRE ALBEDRÍO

OpenAIRE

Alberto Castillo Vicci

1999-01-01

Se propone el test mayziano como prueba alternativa al test de turing (una prueba crítica de la inteligenica artificial). Segun el test mayziano, una máquina tendrá autoconciencia, y por lo tanto pensamiento, si goza de libre albebrío, y es capaz de fijarse fines distintos a los que tiene programados, de manera autarquica, autónoma y espontaneamente, aunque niegue sus sustentaculos. En este artículo se argumenta que, aun para una máquina con los superpoderes del demonio laplaciano (todo el co...

Mass transfer performance comparison of two commonly used liquid desiccants: LiBr and LiCl aqueous solutions

International Nuclear Information System (INIS)

Liu, X.H.; Yi, X.Q.; Jiang, Y.

2011-01-01

Mass transfer performance of two commonly used liquid desiccants, LiBr aqueous solution and LiCl aqueous solution, is compared in this paper on the basis of the same solution temperature and surface vapor pressure. According to the analysis of the analytical solutions of heat and mass transfer processes, the key performance influencing factors are heat capacity ratio of air to desiccant m * and mass transfer unit NTU m . The heat capacities of the two liquid desiccants are about the same at same volumetric flow rate, and LiBr solution has higher density and smaller specific heat capacity. The variance of mass transfer unit with different operating conditions and liquid desiccants are derived based on the experimental results. In the condition of the same desiccant mass flow rate, the dehumidification performance of LiCl solution is better, and the regeneration performance of LiBr solution is a little better or almost the same as that of LiCl solution. In the condition of the same desiccant volumetric flow rate, the dehumidification performance of LiCl solution is a little better or about the same compared with LiBr solution, and the regeneration performance of LiBr solution is better. The COPs of the liquid desiccant systems using these two desiccants are similar; while LiCl solution costs 18% lower than LiBr solution at current Chinese price.

Folate targeted polymeric 'green' nanotherapy for cancer

International Nuclear Information System (INIS)

Narayanan, Sreeja; Binulal, N S; Mony, Ullas; Manzoor, Koyakutty; Nair, Shantikumar; Menon, Deepthy

2010-01-01

The concept of 'green' chemotherapy by employing targeted nanoparticle mediated delivery to enhance the efficacy of phytomedicines is reported. Poly (lactide-co-glycolide) (PLGA) nanoparticles encapsulating a well known nutraceutical namely, grape seed extract (GSE)-'NanoGSE'-was prepared by a nanoprecipitation technique. The drug-loaded nanoparticles of size ∼ 100 nm exhibited high colloidal stability at physiological pH. Molecular receptor targeting of this nanophytomedicine against folate receptor over-expressing cancers was demonstrated in vitro by conjugation with a potential cancer targeting ligand, folic acid (FA). Fluorescence microscopy and flow cytometry data showed highly specific cellular uptake of FA conjugated NanoGSE on folate receptor positive cancer cells. Studies were also conducted to investigate the efficiency of targeted (FA conjugated) versus non-targeted (non-FA conjugated) nanoformulations in causing cancer cell death. The IC 50 values were lowered by a factor of ∼ 3 for FA-NanoGSE compared to the free drug, indicating substantially enhanced bioavailability to the tumor cells, sparing the normal ones. Receptor targeting of FA-NanoGSE resulted in a significant increase in apoptotic index, which was also quantified by flow cytometry and fluorescence microscopy. This in vitro study provides a basis for the use of nanoparticle mediated delivery of anticancer nutraceuticals to enhance bioavailability and effectively target cancer by a 'green' approach.

El yacimiento chatelperroniense al aire libre de Aranbaltza (Barrika, Euskadi

Directory of Open Access Journals (Sweden)

Líbano Silvente, I.

2012-01-01

Full Text Available Se presentan los materiales procedentes de un nuevo yacimiento al aire libre localizado en la costa de Bizkaia. Éste fue localizado como resultado de unas obras de saneamiento por lo que los materiales recuperados están desprovistos de un contexto arqueológico preciso. Aun así un análisis tecnológico y tipológico ha permitido valorar la unidad del conjunto proponiendo la adscripción del grueso del material al Chatelperroniense. Este hallazgo abre nuevas posibilidades para el conocimiento sobre este periodo en la región Cantábrica ya que supondría la primera evidencia de un hábitat al aire libre semejante a los excavados en torno a Bayona.

Implicaciones para el Ecuador del Tratado de Libre Comercio con Estados Unidos en relación a los medicamentos y a la salud.

OpenAIRE

Logroño Barrionuevo, Milton Efraín

2006-01-01

1. LEGISLACION DE PROPIEDAD INTELECTUAL 2.EL TRATADO DE LIBRE COMERCIO: MEDICAMENTOS Y SALUD 3. IMPACTO DEL TRATADO DE LIBRE COMERCIO EN MEDICINAS Y SALUD.4. IMPLICACIONES SOCIALES DEL TRATADO DE LIBRE COMERCIO EN MEDICAMENTOS Y SALUD 5. PROPUESTA DE NEGOCIACIÓN EQUITATIVA DEL ECUADOR EN EL TRATADO DE LIBRE COMERCIO EN MEDICAMENTOS Y SALUD.6. CONCLUSIONES Y RECOMENDACIONES

The Effect of DNA and Sodium Cholate Dispersed Single-Walled Carbon Nano tubes on the Green Algae Chlamydomonas reinhardtii

International Nuclear Information System (INIS)

Williams, R.M.; Cox, Z.; Dolash, B.D.; Sooter, L.J.; Williams, R.M.; Taylor, H.K.; Thomas, J.

2014-01-01

Increasing use of single-walled carbon nano tubes (SWCNTs) will lead to their increased release into the environment. Previous work has shown negative effects of SWCNT on growth and survival of model organisms. The aim of the current study was to determine the effect of SWCNT well-dispersed by either DNA or sodium cholate (SC) on the unicellular green algae Chlamydomonas reinhardtii in stagnant water conditions. Growth measurements were taken up to ten days for algae treated with varied levels of DNA:SWCNT or SC:SWCNT or controls, and chlorophyll content after 10 days was determined. Results show no effect on either growth or chlorophyll content of algae at any concentration or duration. This is in contradiction to prior work showing toxicity of SWCNT to environmental model organisms.

Esteroles libres de la estrella marina echinaster sentus

Directory of Open Access Journals (Sweden)

Rosabel Segura de Correa

2010-05-01

Full Text Available La fracción lipídica de la estrella marina Echinaster sentus se estudió para conocer su composición esterólica. Las estrellas marinas son especies de invertebrados-que pertenecen al phylumechinodermata de la clase Asteroidea. Poseen entre otros componentes esteroides de tipo saponina, esteróles libres polihidroxilados y monohidroxilados.

Ampliación y actualización de una empresa de formación, sobre software libre

OpenAIRE

Palmer Padilla, Fco. Javier

2010-01-01

Este proyecto trata de una investigacion, sobre una migracion de una empresa a software libre. Este proyecto trata de una investigacion, sobre una migracion de una empresa a software libre. This project is a research in a company process of software migration to free software.

Opportunities and challenges of nanotechnology in the green economy.

Science.gov (United States)

Iavicoli, Ivo; Leso, Veruscka; Ricciardi, Walter; Hodson, Laura L; Hoover, Mark D

2014-10-07

In a world of finite resources and ecosystem capacity, the prevailing model of economic growth, founded on ever-increasing consumption of resources and emission pollutants, cannot be sustained any longer. In this context, the "green economy" concept has offered the opportunity to change the way that society manages the interaction of the environmental and economic domains. To enable society to build and sustain a green economy, the associated concept of "green nanotechnology" aims to exploit nano-innovations in materials science and engineering to generate products and processes that are energy efficient as well as economically and environmentally sustainable. These applications are expected to impact a large range of economic sectors, such as energy production and storage, clean up-technologies, as well as construction and related infrastructure industries. These solutions may offer the opportunities to reduce pressure on raw materials trading on renewable energy, to improve power delivery systems to be more reliable, efficient and safe as well as to use unconventional water sources or nano-enabled construction products therefore providing better ecosystem and livelihood conditions.However, the benefits of incorporating nanomaterials in green products and processes may bring challenges with them for environmental, health and safety risks, ethical and social issues, as well as uncertainty concerning market and consumer acceptance. Therefore, our aim is to examine the relationships among guiding principles for a green economy and opportunities for introducing nano-applications in this field as well as to critically analyze their practical challenges, especially related to the impact that they may have on the health and safety of workers involved in this innovative sector. These are principally due to the not fully known nanomaterial hazardous properties, as well as to the difficulties in characterizing exposure and defining emerging risks for the workforce

Improvement of solar cells performances by surface passivation using porous silicon chemically treated with LiBr solution

Energy Technology Data Exchange (ETDEWEB)

Haddadi, Ikbel; Dimassi, Wissem; Bousbih, Rabaa; Hajji, Massoud; Kanzari, M. Ali; Ezzaouia, Hatem [Laboratoire de Photovoltaique, Centre de Recherche et des Technologies de l' Energie, Hammam Lif (Tunisia)

2011-03-15

Solar cells need efficient light absorption to achieve high efficiencies. In this paper, we present a study on the immersion effect of porous silicon (PS) in a Lithium Bromide (LiBr) aqueous solution, followed by thermal annealing at 100 C for 30 min under nitrogen atmosphere on solar cells performances. The surface morphology was studied by Atomic Force Microscopy (AFM). All samples were analyzed by Fourier transmission infrared spectroscopy (FTIR) before and after LiBr immersion. Good electrical properties were observed after thermal annealing at 100 C for 30 min under nitrogen atmosphere. The reflection spectra of PS, before and after LiBr treatment, performed in the 300-1200 nm wavelength range, showed an important decrease of the reflectivity by this new treatment. A significant increase of the photoluminescence (PL) intensity was obtained after LiBr treatment. An enhancement of the light beam induced current (LBIC) as well as the internal quantum efficiency (IQE) were shown after LiBr treatment. I-V characteristics, under AM1.5 illumination, were improved owing to the increase of the minority carrier diffusion length (L) and an excellent enhancement of the surface recombination velocity (V{sub s}) (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Modeling the Charge Transport in Graphene Nano Ribbon Interfaces for Nano Scale Electronic Devices

Science.gov (United States)

Kumar, Ravinder; Engles, Derick

2015-05-01

In this research work we have modeled, simulated and compared the electronic charge transport for Metal-Semiconductor-Metal interfaces of Graphene Nano Ribbons (GNR) with different geometries using First-Principle calculations and Non-Equilibrium Green's Function (NEGF) method. We modeled junctions of Armchair GNR strip sandwiched between two Zigzag strips with (Z-A-Z) and Zigzag GNR strip sandwiched between two Armchair strips with (A-Z-A) using semi-empirical Extended Huckle Theory (EHT) within the framework of Non-Equilibrium Green Function (NEGF). I-V characteristics of the interfaces were visualized for various transport parameters. The distinct changes in conductance and I-V curves reported as the Width across layers, Channel length (Central part) was varied at different bias voltages from -1V to 1 V with steps of 0.25 V. From the simulated results we observed that the conductance through A-Z-A graphene junction is in the range of 10-13 Siemens whereas the conductance through Z-A-Z graphene junction is in the range of 10-5 Siemens. These suggested conductance controlled mechanisms for the charge transport in the graphene interfaces with different geometries is important for the design of graphene based nano scale electronic devices like Graphene FETs, Sensors.

Amebas de vida libre en muestras de agua de piscinas del Departamento de Lima

Directory of Open Access Journals (Sweden)

María Beltrán de Estrada

1997-01-01

Full Text Available Las amebas de vida libre son numerosas y se encuentran en la naturaleza, en medios como: agua, suelos y vegetación. Los géneros Naegleria, Acanthamoeba, Hartmannella y Vahlkampfia, tienen importancia en salud pública, pues son oportunistas y afectan al hombre (enfermedad de los nadadores. Del estudio de 68 muestras de agua en 34 piscinas, 3 zonas de un río y 7 estanques o lagunas, resultaron el 40,9% con amebas de vida libre tales como: Naegleria, Acanthamoeba, Hartmannella y Vahlkampfia. La virulencia de las amebas de vida libre fue estudiada en los animales de laboratorio por inoculación craneal, nasal y ocular. Los resultados obtenidos nos permiten recomendar y considerar el mantenimiento y tratamiento periódico y/o permanente de las piscinas con productos químicos, eficaces y eficientes sin que perjudiquen la salud humana.

Contra el libre albedrío: Aclaraciones ulteriores

OpenAIRE

López Corredoira, Martín

2004-01-01

Brevemente, Aclaro Alguna De Las Cuestiones En Relación Con Mi Artículo "Contrael Libre Albedrío En El Marco De Las Ciencias Naturales Contemporáneas" (Versiónabreviada De Mi Tesis Doctoral De Filosofía En La Universidad De Sevilla) Enrespuesta A Las Críticas Dadas Por Los Dres.Arana, Castro, Salazar, Choza Ybattaner.

Green synthesis of 3,4-dihydropyrimidinones using nano Fe3O4@meglumine sulfonic acid as a new efficient solid acid catalyst under microwave irradiation

Directory of Open Access Journals (Sweden)

Leila Moradi

2018-01-01

Full Text Available Design, synthesis and characterization of nano Fe3O4@meglumine sulfonic acid as a new solid acid catalyst for the simple and green one pot multicomponent synthesis of 3,4-dihydropyrimidin-2(1H-ones/thiones was studied. New solid acid catalyst was prepared through a clean and simple protocol and characterized using FTIR, VSM, TGA, SEM, elemental analysis (CHN and XRD techniques. Heterogenization of homogeneous catalyst as a green approach is a useful method for enhancing the efficiency of catalyst. Presented study was a new method for attachment of homogeneous highly soluble catalyst (meglumine sulfate to the magnetite nanoparticle surfaces for preparing a heterogeneous and effective catalyst. Obtained heterogeneous and reusable solid acid catalyst has high performance in the synthesis of Biginelli compounds. The reaction was performed under microwave irradiation as a rapid and green condition. Easy work up as well as excellent yield (90–98% of products in short reaction times (40–200 s and reusable catalyst are the main advantages of presented procedure. Reaction products were characterized in details using physical and chemical techniques such as melting point, 1H NMR, 13C NMR and FTIR.

Green-synthesized CdS nano-pesticides: Toxicity on young instars of malaria vectors and impact on enzymatic activities of the non-target mud crab Scylla serrata.

Science.gov (United States)

Sujitha, Vasu; Murugan, Kadarkarai; Dinesh, Devakumar; Pandiyan, Amuthvalli; Aruliah, Rajasekar; Hwang, Jiang-Shiou; Kalimuthu, Kandasamy; Panneerselvam, Chellasamy; Higuchi, Akon; Aziz, Al Thabiani; Kumar, Suresh; Alarfaj, Abdullah A; Vaseeharan, Baskaralingam; Canale, Angelo; Benelli, Giovanni

2017-07-01

Currently, nano-formulated mosquito larvicides have been widely proposed to control young instars of malaria vector populations. However, the fate of nanoparticles in the aquatic environment is scarcely known, with special reference to the impact of nanoparticles on enzymatic activity of non-target aquatic invertebrates. In this study, we synthesized CdS nanoparticles using a green protocol relying on the cheap extract of Valoniopsis pachynema algae. CdS nanoparticles showed high toxicity on young instars of the malaria vectors Anopheles stephensi and A. sundaicus. The antimalarial activity of the nano-synthesized product against chloroquine-resistant (CQ-r) Plasmodium falciparum parasites was investigated. From a non-target perspective, we focused on the impact of this novel nano-pesticide on antioxidant enzymes acetylcholinesterase (AChE) and glutathione S-transferase (GST) activities of the mud crab Scylla serrata. The characterization of nanomaterials was carried out by UV-vis and FTIR spectroscopy, as well as SEM and XRD analyses. In mosquitocidal assays, LC 50 of V. pachynema-synthesized CdS nanoparticles on A. stephensi ranged from 16.856 (larva I), to 30.301μg/ml (pupa), while for An. sundaicus they ranged from 13.584 to 22.496μg/ml. The antiplasmodial activity of V. pachynema extract and CdS nanoparticles was evaluated against CQ-r and CQ-sensitive (CQ-s) strains of Plasmodium falciparum. IC 50 of V. pachynema extract was 58.1μg/ml (CQ-s) and 71.46μg/ml (CQ-r), while nano-CdS IC 50 was 76.14μg/ml (CQ-s) and 89.21μg/ml (CQ-r). In enzymatic assays, S. serrata crabs were exposed to sub-lethal concentrations, i.e. 4, 6 and 8μg/ml of CdS nanoparticles, assessing changes in GST and AChE activity after 16days. We observed significantly higher activity of GST, if compared to the control, during the whole experiment period. In addition, a single treatment with CdS nanoparticles led to a significant decrease in AChE activity over time. The toxicity of Cd

SOFTWARE LIBRE: OPORTUNIDADES Y RETOS CON ESPECIAL REFERENCIA A VENEZUELA

Directory of Open Access Journals (Sweden)

Gladys Rodríguez

2008-11-01

Full Text Available En este trabajo se abordan algunas consideraciones en torno al software libre, sus oportunidades pero también sus desafíos, a la vez que se expone el marco legal de esta figura a partir de su implementación en Venezuela. Se ha empleado una metodología descriptivo-explicativa, partiendo de la revisión bibliográfica conjuntamente con la legislación nacional sobre el tema. Asimismo, se consultó a FUNDACITE ZULIA, a través de la Misión Ciencia, y se concluye que el software libre es una oportunidad para desarrollar programas que atiendan necesidades particulares, y hay quienes consideran que resulta una herramienta especialmente útil para democratizar el acceso a la información en países en desarrollo; sin embargo, planteamos la realidad de una brecha digital entre países en desarrollo y desarrollados

Diffusion libre du droit est-elle acquise... pour de bon? | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Depuis, un mouvement de la diffusion libre du droit, soutenu par les instituts ... des documents juridiques des documents du domaine public, consultables en ligne ... International Water Resources Association, in close collaboration with IDRC, ...

Folate targeted polymeric 'green' nanotherapy for cancer

Energy Technology Data Exchange (ETDEWEB)

Narayanan, Sreeja; Binulal, N S; Mony, Ullas; Manzoor, Koyakutty; Nair, Shantikumar; Menon, Deepthy, E-mail: deepthymenon@aims.amrita.edu [Amrita Center for Nanosciences and Molecular Medicine, Amrita Vishwa Vidyapeetham, Kochi-682 041, Kerala (India)

2010-07-16

The concept of 'green' chemotherapy by employing targeted nanoparticle mediated delivery to enhance the efficacy of phytomedicines is reported. Poly (lactide-co-glycolide) (PLGA) nanoparticles encapsulating a well known nutraceutical namely, grape seed extract (GSE)-'NanoGSE'-was prepared by a nanoprecipitation technique. The drug-loaded nanoparticles of size {approx} 100 nm exhibited high colloidal stability at physiological pH. Molecular receptor targeting of this nanophytomedicine against folate receptor over-expressing cancers was demonstrated in vitro by conjugation with a potential cancer targeting ligand, folic acid (FA). Fluorescence microscopy and flow cytometry data showed highly specific cellular uptake of FA conjugated NanoGSE on folate receptor positive cancer cells. Studies were also conducted to investigate the efficiency of targeted (FA conjugated) versus non-targeted (non-FA conjugated) nanoformulations in causing cancer cell death. The IC{sub 50} values were lowered by a factor of {approx} 3 for FA-NanoGSE compared to the free drug, indicating substantially enhanced bioavailability to the tumor cells, sparing the normal ones. Receptor targeting of FA-NanoGSE resulted in a significant increase in apoptotic index, which was also quantified by flow cytometry and fluorescence microscopy. This in vitro study provides a basis for the use of nanoparticle mediated delivery of anticancer nutraceuticals to enhance bioavailability and effectively target cancer by a 'green' approach.

El texto libre, una herramienta para el aprendizaje creativo

Directory of Open Access Journals (Sweden)

Esther Santaella Rodríguez

2018-04-01

Full Text Available El siguiente artículo ofrece una descripción del texto libre como técnica a emplear en el aula, enmarcada dentro de la propuesta educativa defendida desde la pedagogía Freinet, por tanto no es una mera herramienta a utilizar de forma indistinta por maestros y maestras, sino que se enmarca bajo unos principios y cuestiones básicas relacionados con la renovación educativa, que también requiere de la implicación de docentes comprometidos con la misma. El texto libre es una técnica fundamentalmente utilizada para la enseñanza y el aprendizaje de la Lengua en la escuela, que no sólo se relaciona con la expresión y comprensión escritas sino también con la oral. Entre los principios fundamentales sobre los que se sustenta el empleo de esta técnica está el de la libre expresión, como base fundamental para la creación de estos textos, pero otra de las cuestiones que se pueden destacar del empleo de esta herramienta educativa es el hecho de que favorece el desarrollo de las habilidades creativas entre el alumnado, en tanto que son sus propios intereses y sus motivaciones las cuestiones básicas que animan a niños y niñas en la construcción de sus aprendizajes. Además, en su utilización se refleja el desarrollo de otros principios muy presentes en la pedagogía Freinet, como por ejemplo la cooperación, la autonomía o la vinculación del entorno y la realidad más próxima al alumnado, con su propio proceso de enseñanza y aprendizaje dentro y fuera de las aulas.

Reconstrucción estructuralista de la Teoría del envejecimiento por radicales libres

OpenAIRE

O'Lery, María de las Mercedes

2013-01-01

O'Lery, M. de las M. (2013). Reconstrucción estructuralista de la Teoría del envejecimiento por radicales libres (Tesis de Doctorado). Universidad Nacional de Quilmes, Bernal, Argentina. Este trabajo pretende, principalmente, ofrecer una reconstrucción de la teoría del envejecimiento por radicales libres, a partir de un enfoque estructuralista y en lo que respecta a sus aspectos sincrónicos. Dicha tarea, exigirá el análisis y la reconstrucción previa de un modelo de reacciones de óxido-red...

Factores diferenciales entre los ERP de software libre (FSW ERP) y los ERP propietarios

OpenAIRE

Oltra Badenes, Raúl Francisco; Gil Gómez, Hermenegildo; Bellver López, Rosa Ana

2011-01-01

[ES] : Los sistemas de información son actualmente uno de los factores clave en el desarrollo y competitividad de la empresa. Dentro de los sistemas de información, los ERP son posiblemente los sistemas que mayor impacto tienen en la gestión de las empresas. En su continua evolución, una de las nuevas tendencias en el desarrollo de ERP, es la del software libre o Free Software. Sin embargo, prácticamente no hay estudios que centren su atención en la aplicación del software libre a...

¿UNIÓN LIBRE O MATRIMONIO? Efectos en el bienestar de los hijos

Directory of Open Access Journals (Sweden)

Diego Amador

2012-01-01

Full Text Available En este artículo evaluamos si existen diferencias en las variables de desempeño de niños y adultos entre hogares casados y hogares en unión libre, una vez que se controla por diferencias observadas entre los dos tipos de familias y se controla por posibles problemas de endogeneidad debidos a la autoselección con base en la uti-lización de la técnica de variables instrumentales. Utilizamos una variedad de bases de datos colombianas que tienen información acerca de variables de desempeño de los niños. Los resultados indican que los hogares en unión libre están peor que los hogares casados en varias dimensiones, incluidas la tenencia de bienes duraderos y el bienestar infantil. Además, intentamos entender las razones por las cuales estas diferencias emergen y encontramos que los hogares en unión libre exhiben com-portamientos menos estables, con menor planeación del futuro, se caracterizan por menor especialización y riesgo compartido entre la pareja, y exhiben comporta-mientos menos saludables y peores prácticas parentales.

“Nano-Ginseng” for Enhanced Cytotoxicity AGAINST Cancer Cells

Science.gov (United States)

Zhu, Weiyan; Si, Chuanling; Lei, Jiandu

2018-01-01

Panax ginseng has high medicinal and health values. However, the various and complex components of ginseng may interact with each other, thus reducing and even reversing therapeutic effects. In this study, we designed and fabricated a novel “nano-ginseng” with definite ingredients, ginsenoside Rb1/protopanaxadiol nanoparticles (Rb1/PPD NPs), completely based on the protopanaxadiol-type extracts. The optimized nano-formulations demonstrated an appropriate size (~110 nm), high drug loading efficiency (~96.8%) and capacity (~27.9 wt %), long half-time in systemic circulation (nine-fold longer than free PPD), better antitumor effects in vitro and in vivo, higher accumulation at the tumor site and reduced damage to normal tissues. Importantly, this process of “nano-ginseng” production is a simple, scalable, green economy process. PMID:29473838

El libre desarrollo de la personalidad (Un bien jurídico digno del Estado constitucional)

OpenAIRE

Migu Ontiveros Alonso

2006-01-01

Con fundamento en la dignidad humana, en su calidad de valor fundamental plasmado en toda Constitución moderna, el autor propone incorporar, en calidad de bien jurídicamente protegido, al libre desarrollo de la personalidad, con el objeto de proteger a los grupos especialmente vulnerables ante los delitos vinculados a la explotación humana. el libre desarrollo de la personalidad, se afirma en este breve artículo, puede ser equiparado a la vida humana como valor supero del se...

Comunidades de software libre en Argentina: motivaciones, participación, militancia

Directory of Open Access Journals (Sweden)

Agustín Zanotti

2014-12-01

Full Text Available El artículo retoma indagaciones sobre comunidades de software libre en Argentina para analizar sus formas de participación y militancia. Nos enfocamos en las motivaciones que convocan a los miembros de comunidades y proyectos, las cuales se asocian a las potencialidades tanto técnicas como sociales del modelo libre de producción de software. El análisis nos lleva a comprender que las formas de solidaridad al interior de estos grupos se encuentran inescindiblemente unidas a una búsqueda personal y a necesidades cotidianas de sus participantes. Las comunidades generan y distribuyen capitales o recursos de manera retributiva, en función de sus contribuciones y aportes. Sobre la base de ciertas identidades geeks/hackers ligadas a estos entusiastas informáticos, tales espacios fortalecen vínculos, relaciones de pertenencia y experiencias compartidas. Junto con ello se van construyendo definiciones éticas y políticas en relación al software y los diferentes temas que hacen a la agenda local de los colectivos.El texto abre la discusión sobre las formas de militancia que existen detrás de estos colectivos y la construcción del software libre como un objeto político. Inscribimos de este modo el debate en una reflexión más amplia sobre la acción colectiva y los movimientos sociales contemporáneos.

Medicamentos de venta libre en el Brasil

OpenAIRE

Heineck Isabela; Schenkel Eloir Paulo; Vidal Xavier

1998-01-01

En el presente estudio se analizaron los 100 productos del mercado farmacéutico popular (de venta libre) más vendidos en el Brasil, en el período comprendido entre junio de 1992 y junio de 1993. Se excluyeron 23 productos alimentarios clasificados como medicamentos. La muestra, formada por 77 medicamentos, representaba aproximadamente 67% del consumo en valores y 76,8% del consumo en unidades de las especialidades vendidas en el mercado popular. Para la clasificación de los medicamentos, se u...

Exodoncia atraumática e implante post exodoncia sin colgajo combinado con injerto gingival libre

OpenAIRE

García Linares, Sixto; Yon Guerrero, Helen

2010-01-01

Presentamos un caso donde se describe la técnica de exodoncia atraumática, colocación de un implante post exodoncia y cierre por primera intención mediante un injerto gingival libre. El uso de implantes post exodoncia necesita varias condiciones para poder realizarse, entre ellas: paredes óseas conservadas, hueso alveolar más allá del ápice mayor a 4 mm. , margen gingival conservado, ausencia de fístula, etc. El injerto gingival libre permite una cicatrización por primera intención n...

Injerto libre braquial medial Free medial arm graft

Directory of Open Access Journals (Sweden)

P. Martos Díaz

2007-12-01

Full Text Available Introducción. Entre las reconstrucciones de defectos titulares de cabeza y cuello, el injerto libre microvascularizado braquial medial no ha adquirido mucha popularidad debido a las variaciones anatómicas que se reflejan en la vascularización de éste. Nuestro objetivo es realizar una descripción de la anatomía y técnica quirúrgica, así como una revisión de la literatura describiendo las ventajas y desventajas de este tipo de injerto. Material y método. Presentamos el caso de una paciente con carcinoma epidermoide de mucosa yugal izquierda con afectación ganglionar ipsilateral. Se procedió a su resección con márgenes más disección cervical funcional. La reconstrucción del defecto se llevó a cabo mediante un injerto libre microvascularizado braquial medial de brazo izquierdo. Discusión. Pensamos que el injerto libre braquial medial de brazo se trata de una opción más segura a la hora de la reconstrucción de defectos cervicofaciales, aportando una serie de ventajas entre las que destacan: no sacrificio de una arteria terminal, cierre primario de la zona donante, mínimo defecto estético, y poseer una piel fina, elástica y sin vello.Introduction. Free medial microvascularized arm grafts have not become very popular for the reconstruction of head and neck defects due to anatomic variations in their vascularization. Our objective was to describe the anatomy and surgical technique and to review the literature on the advantages and disadvantages of free medial arm grafts. Material and methods. We report the case of a patient with squamous cell carcinoma of the left jugal mucosa with same-side lymph node involvement. The tumor was resected with margins and a functional cervical dissection was performed. The defect was reconstructed using a free medial microvascularized graft from the left arm. Discussion. We believe that free medial arm grafts are a safer option for the reconstruction of cervicofacial defects and that they offer

Cellulose fibers: bio- and nano-polymer composites ; green chemistry and technology

National Research Council Canada - National Science Library

Kalia, Susheel; Kaith, B. S; Inderjeet Kaur

2011-01-01

... on eco-friendly materials, and the steps taken in this direction will lead toward GreenScience and Green-Technology. Cellulosics account for about half of the dry weight of plant biomass and approximately half of the dry weight of secondary sources of waste biomass. At this crucial moment, cellulose fibers are pushed due to their "gr...

Cursos de créditos de libre elección (2010)

OpenAIRE

Punt BIU

2010-01-01

Poster que realizó PuntBiu para los cursos de crédito de libre elección (CECLEC) en el año 2010 que organizaba la Biblioteca de la Universidad de Alicante junto con el Vicerrectorado de Tecnología e Innovación. Educativa.

Site controlled Red-Yellow-Green light emitting InGaN Quantum Discs on nano-tipped GaN rods

KAUST Repository

Conroy, Michele Ann; Li, Haoning; Kusch, Gunnar; Zhao, Chao; Ooi, Boon S.; Paul, Edwards; Martin, Robert; Holmes, Justin D.; Parbrook, Peter

2016-01-01

We report a method of growing site controlled InGaN multiple quantum discs (QDs) at uniform wafer scale on coalescence free ultra-high density (>80%) nanorod templates by metal organic chemical vapour deposition (MOCVD). The dislocation and coalescence free nature of the GaN space filling nanorod arrays eliminates the well-known emission problems seen in InGaN based visible light sources that these types of crystallographic defects cause. Correlative scanning transmission electron microscopy (STEM), energy-dispersive x-ray (EDX) mapping and cathodoluminescence (CL) hyperspectral imaging illustrates the controlled site selection of the red, yellow and green (RYG) emission at these nano tips. This article reveals that the nanorod tips’ broad emission in the RYG visible range is in fact achieved by manipulating the InGaN QD’s confinement dimensions, rather than significantly increasing the In%. This article details the easily controlled method of manipulating the QDs dimensions producing high crystal quality InGaN without complicated growth conditions needed for strain relaxation and alloy compositional changes seen for bulk planar GaN templates.

Site controlled Red-Yellow-Green light emitting InGaN Quantum Discs on nano-tipped GaN rods

KAUST Repository

Conroy, Michele Ann

2016-03-10

We report a method of growing site controlled InGaN multiple quantum discs (QDs) at uniform wafer scale on coalescence free ultra-high density (>80%) nanorod templates by metal organic chemical vapour deposition (MOCVD). The dislocation and coalescence free nature of the GaN space filling nanorod arrays eliminates the well-known emission problems seen in InGaN based visible light sources that these types of crystallographic defects cause. Correlative scanning transmission electron microscopy (STEM), energy-dispersive x-ray (EDX) mapping and cathodoluminescence (CL) hyperspectral imaging illustrates the controlled site selection of the red, yellow and green (RYG) emission at these nano tips. This article reveals that the nanorod tips’ broad emission in the RYG visible range is in fact achieved by manipulating the InGaN QD’s confinement dimensions, rather than significantly increasing the In%. This article details the easily controlled method of manipulating the QDs dimensions producing high crystal quality InGaN without complicated growth conditions needed for strain relaxation and alloy compositional changes seen for bulk planar GaN templates.

Sustainable Nanotechnology: Through Green Methods and Life-Cycle Thinking

Directory of Open Access Journals (Sweden)

Rapinder Sawhney

2010-10-01

Full Text Available Citing the myriad applications of nanotechnology, this paper emphasizes the need to conduct “life cycle” based assessments as early in the new product development process as possible, for a better understanding of the potential environmental and human health consequences of nanomaterials over the entire life cycle of a nano-enabled product. The importance of this reasoning is further reinforced through an illustrative case study on automotive exterior body panels, which shows that the perceived environmental benefits of nano-based products in the Use stage may not adequately represent the complete picture, without examining the impacts in the other life cycle stages, particularly Materials Processing and Manufacturing. Nanomanufacturing methods often have associated environmental and human health impacts, which must be kept in perspective when evaluating nanoproducts for their “greenness.” Incorporating life-cycle thinking for making informed decisions at the product design stage, combining life cycle and risk analysis, using sustainable manufacturing practices, and employing green chemistry alternatives are seen as possible solutions.

Qualité, portée et incidence de l'édition savante en libre accès en ...

International Development Research Centre (IDRC) Digital Library (Canada)

Une meilleure compréhension du libre accès aux recherches savantes aidera à déterminer en quoi il contribue à accroître la circulation des connaissances et la diffusion des résultats de recherche en Amérique latine. Le libre accès (le fait de pouvoir consulter, sans restriction aucune, des articles publiés dans des revues ...

Neurofilosofía y libre albedrío

OpenAIRE

Muñoz Ortega, José Manuel

2013-01-01

Presento la trascendencia de la neurociencia para el estudio de la relación entre determinismo y libre albedrío. Diversos trabajos vinculan la actividad de ciertas áreas nerviosas con el desempeño de las funciones volitivas, el trabajo de Benjamin Libet y de Daniel Wegner otorga gran importancia al inconsciente en nuestros actos, y hay pruebas de influencia causal del entorno sociocultural sobre el cerebro del individuo. Todo esto sugiere una concepción determinista de nuestra voluntad, pero ...

Preparation of soft-agglomerated nano-sized ceramic powders by sol-gel combustion process

International Nuclear Information System (INIS)

Feng, Q.; Ma, X.H.; Yan, Q.Z.; Ge, C.C.

2009-01-01

The soft-agglomerated Gd 2 BaCuO 5 (Gd211) nano-powders were synthesized by sol-gel combustion process with binary ligand and the special pretreatment on gel. The mechanism of the formation of weakly agglomerated structure was studied in detail. The results showed that network structure in gelation process was found to be a decisive factor for preventing agglomeration of colloidal particles. The removal of free water, coordinated water, and most of hydroxyl groups during pretreatment further inhibited the formation of hydrogen bonds between adjacent particles. The soft-agglomeration of the particles was confirmed by isolated particles in calcined Gd211 powders and in green compact, a narrow monomodal pore size distribution of the green compact and the low agglomeration coefficient of the calcined Gd211 powder. Extension this process to synthesis of BaCeO 3 , BaTiO 3 and Ce 0.8 Sm 0.2 O 1.9 powders, also led to weakly agglomerated nano-powders. It suggests that this method represents a powerful and facile method for the creation of doped and multi-component nano-sized ceramic powders.

"Green" synthesized and coated nanaosilver alters the membrance permeability of barrier (intestinal, brain, endothelial) cells and stimulates oxidative stress pathways in neurons.

Science.gov (United States)

Nanosilver's (nanoAg) use in medical applications and consumer products is increasing. Because of this, its "green" synthesis and surface modification with beneficial coatings are desirable. Given nanoAg's potential exposure routes (e.g., dermal, intestin...

Corrosion behaviour of austenitic stainless steel, nickel-base alloy and its weldments in aqueous LiBr solutions

Energy Technology Data Exchange (ETDEWEB)

Blasco-Tamarit, E.; Igual-Munoz, A.; Garcia Anton, J.; Garcia-Garcia, D. [Departamento de Ingenieria Quimica y Nuclear. E.T.S.I.Industriales, Universidad Politecnica de Valencia, P.O. Box 22012 E-46071 Valencia (Spain)

2004-07-01

With the advances in materials production new alloys have been developed, such as High- Alloy Austenitic Stainless Steels and Nickel-base alloys, with high corrosion resistance. These new alloys are finding applications in Lithium Bromide absorption refrigeration systems, because LiBr is a corrosive medium which can cause serious corrosion problems, in spite of its favourable properties as absorbent. The objective of the present work was to study the corrosion resistance of a highly alloyed austenitic stainless steel (UNS N08031) used as base metal, a Nickel-base alloy (UNS N06059) used as its corresponding filler metal, and the weld metal obtained by the Gas Tungsten Arc Welding (GTAW) procedure. The materials have been tested in different LiBr solutions (400 g/l, 700 g/l, 850 g/l and a commercial 850 g/l LiBr heavy brine containing Lithium Chromate as corrosion inhibitor), at 25 deg. C. Open Circuit Potential tests and potentiodynamic anodic polarization curves have been carried out to obtain information about the general electrochemical behaviour of the materials. The polarization curves of all the alloys tested were typical of passivable materials. Pitting corrosion susceptibility has been evaluated by means of cyclic potentiodynamic curves, which provide parameters to analyse re-passivation properties. The galvanic corrosion generated by the electrical contact between the welded and the base material has been estimated from the polarization diagrams according to the Mixed Potential Method. Samples have been etched to study the microstructure by Scanning Electron Microscopy (SEM). The results demonstrate that the pitting resistance of all these materials increases as the LiBr concentration decreases. In general, the presence of chromate tended to shift the pitting potential to more positive values than those obtained in the 850 g/l LiBr solution. (authors)

Porosidad libre en granitos alterados: Comentarios a las normas

Directory of Open Access Journals (Sweden)

Íñigo Íñigo, A. C.

1995-06-01

Full Text Available In the present paper, the possible relation among some petrophysical properties of five types of granitic materials, whether artificially aged or not, subject to different consolidation and/or water repellent treatments, has been studied. The study indicates a good correlation among imibition values and porosity (free and total. Likewise, correlation exists between apparent density and total porosity. Differences in relative variation of imbibition values and free porosity when treating samples, advise about modification or enlargment of standards for materials with high microporosity index.

En el presente artículo se estudia la posible relación existente entre los valores de algunas propiedades petrofísicas de cinco variedades de materiales graníticos cuando, envejecidos artificialmente o no, son sometidos a diferentes tratamientos de consolidación y/o hidrofugación. El estudio indica una buena correlación entre los valores de la imbibición y porosidad (libre y total. Asimismo, existe correlación entre densidad aparente y porosidad total. Las diferencias en las variaciones relativas de los valores de imbibición y porosidad libre al tratar las muestras, aconseja la modificación o ampliación de las normas para materiales con elevado índice de microporosidad.

Muslim women representations in the daily newspaper La Libre Belgique

OpenAIRE

Rim MEDDEB

2014-01-01

This contribution explains the discursive modalities, which offer a media visibility of Muslim women in the daily newspaper La Libre Belgique. The analysis examines the newspaper’s material devices such as the creation of sections, the thematic structures and the reference strategies used in the news articles in order to construct social hierarchies based on religious identity and gender criteria.

Muslim women representations in the daily newspaper La Libre Belgique

Directory of Open Access Journals (Sweden)

Rim MEDDEB

2014-12-01

Full Text Available This contribution explains the discursive modalities, which offer a media visibility of Muslim women in the daily newspaper La Libre Belgique. The analysis examines the newspaper’s material devices such as the creation of sections, the thematic structures and the reference strategies used in the news articles in order to construct social hierarchies based on religious identity and gender criteria.

Green tea, red wine and lemon extracts reduce experimental tumor growth and cancer drug toxicity.

Science.gov (United States)

Zaletok, S P; Gulua, L; Wicker, L; Shlyakhovenko, V A; Gogol, S; Orlovsky, O; Karnaushenko, O V; Verbinenko, A; Milinevska, V; Samoylenko, O; Todor, I; Turmanidze, T

2015-12-01

To evaluate antitumor effect of plant polyphenol extracts from green tea, red wine lees and/or lemon peel alone and in combination with antitumor drugs on the growth of different transplanted tumors in experimental animals. Green tea extract (GTE) was prepared from green tea infusion. GTE-based composites of red wine (GTRW), lemon peel (GTRWL) and/or NanoGTE as well as corresponding nanocomposites were prepared. The total polyphenolics of the different GTE-based extracts ranged from 18.0% to 21.3%. The effects of GTE-based extracts were studied in sarcoma 180, Ehrlich carcinoma, B16 melanoma, Ca755 mammary carcinoma, P388 leukemia, L1210 leukemia, and Guerin carcinoma (original, cisplatin-resistant and doxorubicin-resistant variants). The extracts were administered as 0.1% solution in drinking water (0.6-1.0 mg by total polyphenolics per mouse per day and 4.0-6.3 mg per rat per day). Tumor growth inhibition (TGI) in mice treated with NanoGTE, cisplatin or cisplatin + NanoGTE was 27%, 55% and 78%, respectively, in Sarcoma 180%, 21%, 45% and 59%, respectively, in Ehrlich carcinoma; and 8%, 13% and 38%, respectively in B16 melanoma. Composites of NanoGTE, red wine, and lemon peel (NanoGTRWL) enhanced the antitumor effects of cyclophosphamide in mice with Ca755 mammary carcinoma. The treatment with combination of NanoGTE and inhibitors of polyamines (PA) synthesis (DFMO + MGBG) resulted in significant TGI of P388 leukemia (up to 71%) and L1210 leukemia. In rats transplanted with Guerin carcinoma (parental strain), treatment with GTRW or GTE alone resulted in 25-28% TGI vs. 55-68% TGI in cisplatin-treated animals. The inhibition observed in the case of combination of GTE or GTRW with cisplatin was additive giving 81-88% TGI. Similar effects were observed when combinations of the cytostatics with GTE (or NanoGTE) were tested against cisplatin- or doxorubicin-resistant Guerin carcinoma. Moreover, the plant extracts lowered side toxicity of the drugs. Treatment with GTE

Dissociative excitation of lithium atom in electron collisions with LiBr molecules

International Nuclear Information System (INIS)

Smirnov, Yu.M.

1998-01-01

Effective cross sections of the lithium atom dissociative excitation in electron collisions with the LiBr molecules are measured. The measurement error equals 5-12%. The optical functions of the lithium atom dissociative excitation are calculated on the basis of the data obtained

Erythrocyte-derived nano-probes functionalized with antibodies for targeted near infrared fluorescence imaging of cancer cells

OpenAIRE

Anvari, Bahman; Mac, Jenny T.; Nunez, Vicente; Burns, Joshua M.; Guerrero, Yadir A.

2016-01-01

Constructs derived from mammalian cells are emerging as a new generation of nano-scale platforms for clinical imaging applications. Herein, we report successful engineering of hybrid nano-structures composed of erythrocyte-derived membranes doped with FDA-approved near infrared (NIR) chromophore, indocyanine green (ICG), and surface-functionalized with antibodies to achieve molecular targeting. We demonstrate that these constructs can be used for targeted imaging of cancer cells in vitro. The...

An experimental study on the effect of low fin tube geometry on pool boiling of a LiBr solution

International Nuclear Information System (INIS)

Kim, Nae Hyun

2015-01-01

Pool boiling heat transfer coefficients of a LiBr solution were obtained for seven low fin tubes having different fin pitch and fin height. The test range covered saturation pressure from 7.38kPa to 101.3kPa, heat flux from 20 kW/m 2 to 40 kW/m 2 and LiBr concentration from 0% to 50%. The optimum fin geometry for the present experimental range turned out to be 26 fpi with 0.18 mm fin height.The advantage of added heat transfer area and the disadvantage of slower bubble growth and departure appear to have yielded an optimum fin pitch. The heat transfer coefficient decreased as saturation pressure decreased and Libr concentration increased. The reason may be attributed to the low saturation pressure, which increased the bubble departure diameter and decreased the bubble departure frequency. As the LiBr concen reation increased, the saturation temperature increased and the mass diffusion rate decreased, which resulted in a reduced heat transfer coefficient. The heat transfer coefficients of the low fin tube were greater than those of the smooth tube. Correlations were developed based on the present data

Synthesis of Boron Nano wires, Nano tubes, and Nano sheets

International Nuclear Information System (INIS)

Patel, R.B.; Chou, T.; Iqbal, Z.

2014-01-01

The synthesis of boron nano wires, nano tubes, and nano sheets using a thermal vapor deposition process is reported. This work confirms previous research and provides a new method capable of synthesizing boron nano materials. The materials were made by using various combinations of MgB 2 , Mg(BH 4 ) 2 , MCM-41, NiB, and Fe wire. Unlike previously reported methods, a nanoparticle catalyst and a silicate substrate are not required for synthesis. Two types of boron nano wires, boron nano tubes, and boron nano sheets were made. Their morphology and chemical composition were determined through the use of scanning electron microscopy, transmission electron microscopy, and electron energy loss spectroscopy. These boron-based materials have potential for electronic and hydrogen storage applications.

Nano-technology and nano-toxicology.

Science.gov (United States)

Maynard, Robert L

2012-01-01

Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of exposure to nano-materials and relates these to the evidence of the effects on health of the ambient aerosol. A number of hypotheses are proposed and the dangers of adopting unsubstantiated hypotheses are stressed. Nano-toxicology presents many challenges and will need substantial financial support if it is to develop at a rate sufficient to cope with developments in nano-technology.

Solvent-Free Synthesis of Aryl Iodide Using Nano SiO2/HIO4 as a Reusable Acid Catalyst

Directory of Open Access Journals (Sweden)

A. Bamoniri

2014-07-01

Full Text Available An efficient and environmentally benign   method for the synthesis of aryl iodides have been developed by diazotization of aromatic amines with NaNO2 and nanosilica periodic acid (nano-SPIA as a green catalyst via grinding followed by a sandmeyer iodination by KI under solvent-free conditions at room temperature. The ensuing aryl diazonium salts supported on nano-SPIA were sufficiently stable to be kept at room temperature in the dry state. This method is a novel, efficient, eco-friendly route for solvent-free synthesis of aryl iodides.

Réseau des développeurs - logiciels d'exploitation libre pour ...

International Development Research Centre (IDRC) Digital Library (Canada)

Un atelier technique réunissant des utilisateurs, des développeurs et des promoteurs des logiciels libres sera organisé pour mettre au point une application prototype - des formulaires électroniques permettant de saisir des données au moyen d'un ANP puis de les transférer dans un ordinateur - pouvant combler les ...

Nano technology

International Nuclear Information System (INIS)

Lee, In Sik

2002-03-01

This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

Guide du calcul avec les logiciels libres XCAS, Scilab, Bc, Gp, GnuPlot, Maxima, MuPAD

CERN Document Server

Connan, Guillaume

2008-01-01

Le Guide du Calcul avec les logiciels libres vous propose de maîtriser les bases de plusieurs logiciels gratuits de calcul formel et numérique, et de géométrie dynamique : XCAS, Scilab, Bc, Gp, GnuPlot, Maxima, Octave, Yacas, et également MuPAD (non libre). Ces logiciels sont multiplateformes (Windows, Mac, Linux) et s'installent rapidement. La grande originalité de cet ouvrage est de détailler pas à pas l'utilisation de plusieurs logiciels pour plusieurs types de calcul. Il propose ainsi des applications en mathématiques, en physique et en sciences de l'ingénieur (par exemple : équations différentielles utilisées en physique, traitement du son...). Il vous aidera à savoir utiliser le bon logiciel au bon moment pour résoudre le bon problème. Cet ouvrage s'adresse à toute personne voulant utiliser le calcul en mathématiques à l'aide de logiciels libres : étudiants en mathématiques ou en informatique, professeurs de lycée souhaitant utiliser ces outils dans le cadre de leur cours et jusqu'...

El software libre en la educación colombiana Análisis de herramientas

Directory of Open Access Journals (Sweden)

Julián Alberto Monsalve Pulido

2011-05-01

Full Text Available Este artículo tiene como objetivo hacer un análisis de la utilización de software libre en la educación en América Latina, la evolución y qué herramientas se pueden usar para dar cumplimiento al plan TIC impulsado por el gobierno nacional, para el caso de Colombia. Lo anterior llevaría a tener un análisis del proceso tecnológico que cualquier entidad educati- va puede tomar para lograr todos los objetivos académicos y tecnológicos. En cada uno de los parámetros analizados se concluye que el software libre es la oportunidad que tiene Colombia para evolucionar en la parte educativa en la implementación de las TIC.

Matrimonio y unión libre en la percepción de adolescentes mexicanos radicados en Tijuana

Directory of Open Access Journals (Sweden)

Norma OJEDA

2009-01-01

Full Text Available Este es un estudio sobre las actitudes y percepciones de los jóvenes mexicanos acerca de la unión libre y el matrimonio. Se censó la población estudiantil de dos preparatorias públicas de Tijuana, Baja California, y también se obtuvo información proveniente de grupos focales realizados únicamente con estudiantes femeninas de las mismas escuelas. Los resultados indican que la mayoría de las mujeres y los hombres entrevistados no creen que existan ventajas comparativas entre el matrimonio y la unión libre. Asimismo, son más los jóvenes que están convencidos de que la convivencia prematrimonial contribuye a la estabilidad marital, que aquéllos que piensan que el matrimonio hace más estable a la pareja. También se encontró que son multinivel los aspectos referenciales considerados en las percepciones de las adolescentes entrevistadas acerca de los pros y contras que tienen la unión libre y el matrimonio.

Comparativa de software libre para tratamiento de archivos DICOM

OpenAIRE

Rioja Calvo, Álvaro

2015-01-01

El campo de la cirugía está en constante crecimiento. Continuamente se investiga sobre nuevos avances que puedan facilitar y prever las situaciones de riesgo en las intervenciones quirúrgicas. La impresión de huesos en tres dimensiones es uno de estos avances, ya que ayuda a simular una posterior intervención, programar todos los pasos a seguir y prevenir posibles complicaciones. Este estudio es una comparativa de los diferentes softwares libres que se pueden utilizar para la exportación de a...

Tiempo libre: ¿División de la vida o integración de la misma?… ¿Esclavitud o libertad?

Directory of Open Access Journals (Sweden)

Karol Fajardo Mariño

2002-11-01

Full Text Available El tiempo libre ha sido estudiado a través de los años por distintos teóricos de las instituciones lúdicas, lo que busca este artículo es mostrar las dos tendencias principales en las que se puede agrupar el tiempo del hombre actual.Comenzando por una tendencia segmentada que gira en torno a la filosofía del trabajo y cuya esencia muestra la vida esclavizada del hombre, donde el tiempo libre es solo un espacio de una libertad disfrazada. Seguida de una tendencia holística que expone una amalgama interesante entre el tiempo libre y el tiempo de trabajo, manifestando el auge de la vida propia en el manejo de la libertad individual.

Nano Materials

International Nuclear Information System (INIS)

Jin, In Ju; Lee, Ik Mo; Kwon, Yeung Gu

2006-02-01

This book introduces background of nano science such as summary, plenty room at the bottom, access way to nano technique, nanoparticles using bottom-up method which are a marvel of nature, and modern alchemy : chemical synthesis of artificial nano structure, understanding of quantum mechanics, STM/AFM, nano metal powder, ceramic nanoparticles, nano structure film, manufacture of nanoparticles using reverse micelle method, carbon nano tube, sol-gel material, nano energy material, nano catalyst nano bio material technology and spintronics.

EL TRATADO DE LIBRE COMERCIO EN LOS DISCURSOS DE LOS CULTIVADORES DE TRIGO EN YACUANQUER-NARIÑO

OpenAIRE

Burbano Huertas, Luis Felipe; Ortega Vera, César Mauricio

2015-01-01

A finales del siglo XX Colombia ha ingresado paulatinamente en los procesos de libre comercialización con otros países, derivados de las dinámicas del mercado a nivel internacional; entre estos se encuentran el de la apertura económica en la década de los noventa y en la actualidad, el Tratado de Libre Comercio (TLC). El TLC, ha sido objeto de una serie de inconformidades planteadas por parte de algunos sectores económicos, como es el caso de los cultivadores de trigo en todo el país y partic...

Nano-technology and nano-toxicology

OpenAIRE

Maynard, Robert L.

2012-01-01

Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of ...

Ionic liquid assisted synthesis of nano Pd-Au particles and application for the detection of epinephrine, dopamine and uric acid

Energy Technology Data Exchange (ETDEWEB)

Tsai, Tsung-Hsuan; Thiagarajan, Soundappan; Chen Shenming, E-mail: smchen78@ms15.hinet.net; Cheng Chingyi

2012-01-31

Nano Pd-Au particles have been electrochemically fabricated utilizing ionic liquid as green electrolyte (1-Butyl-3-methylimidazolium tetrafluoroborate). Nano Pd-Au particles modified glassy carbon electrode (GCE) and indium tin oxide coated glass electrodes were examined using atomic force microscopy, field emission scanning electron microscope and X-ray diffraction studies. Electrodeposited nano Pd-Au particles' average diameter was found as 33 nm. Nano Pd-Au particle modified GCE was electrochemically active and stable in various pH solutions. The proposed nano particle modified GCE reduces the over potential and shows the well defined oxidation peaks for the detection of epinephrine and simultaneous determination of dopamine and uric acid (in pH 7.0 phosphate buffer solution) using cyclic voltammetry and differential pulse voltammetry.

Multi-functional nano silver: A novel disruptive and theranostic agent for pathogenic organisms in real-time

Science.gov (United States)

Gopinath, Ponnusamy Manogaran; Ranjani, Anandan; Dhanasekaran, Dharumadurai; Thajuddin, Nooruddin; Archunan, Govindaraju; Akbarsha, Mohammad Abdulkader; Gulyás, Balázs; Padmanabhan, Parasuraman

2016-01-01

The present study was aimed at evaluating the fluorescence property, sporicidal potency against Bacillus and Clostridium endospores, and surface disinfecting ability of biogenic nano silver. The nano silver was synthesized using an actinobacterial cell-filtrate. The fluorescence property as well as imaging facilitator potency of this nano silver was verified adopting spectrofluorometer along with fluorescent and confocal laser scanning microscope wherein strong emission and bright green fluorescence, respectively, on the entire spore surface was observed. Subsequently, the endospores of B. subtilis, B. cereus, B. amyloliquefaciens, C. perfringens and C. difficile were treated with physical sporicides, chemical sporicides and nano silver, in which the nano silver brought about pronounced inhibition even at a very low concentration. Finally, the environmental surface-sanitizing potency of nano silver was investigated adopting cage co-contamination assay, wherein vital organs of mice exposed to the nano silver-treated cage did not show any signs of pathological lesions, thus signifying the ability of nano silver to completely disinfect the spore or reduce the count required for infection. Taken these observations together, we have shown the multi-functional biological properties of the nano silver, synthesized using an actinobacterial cell-filtrate, which could be of application in advanced diagnostics, biomedical engineering and therapeutics in the near future. PMID:27666290

Legitimidad y finalidad de los capítulos de propiedad intelectual en los tratados de libre comercio (TLC)

OpenAIRE

Frankel, Susy

2011-01-01

Una visión analítica de la realidad actual permite apreciar un auge de los Tratados de Libre Comercio, mientras se presenta un estancamiento en las negociaciones multilaterales de comercio. Si bien la negociación de los TLC no se limita a los países desarrollados, los negociados por los países en desarrollo no tienden a contemplar mejoras en los estándares de propiedad intelectual. Algunos de los capítulos relativos a la propiedad intelectual incluidos en los Tratados de Libre Comercio simple...

Capacidades físicas condicionales del éxito en lucha: diferencias entre libre olímpica y grecorromana

OpenAIRE

López Gullón, José María

2013-01-01

Este estudio analizó los componentes del rendimiento físico, psicológico y antropométrico que diferenciaban los luchadores de las modalidades masculina (libre olímpica y grecorromana) y femenina (libre femenina) entre los niveles competitivos de élite y amateur, así como las diferencias en el perfil psicológico, fisiológico, neuromuscular, antropométrico, de velocidad y extensibilidad muscular que podían existir entre las diferentes categorías de peso en un total de 92 luchadores varones y 35...

Tocando a las puertas del cielo. México y la negociación del Tratado de Libre Comercio

OpenAIRE

Orozco-Martínez, Carlos E.

1992-01-01

Análisis de la iniciativa de Carlos Salinas de Gortari como presidente de México para la creación de un área libre de comercio con Estados Unidos y Canadá. Se hace una radiografía de lo negociado para el Tratado de Libre Comercio, como acceso a mercados, reglas de comercio, servicios, inversión y propiedad intelectual; se repasa lo visto en materia de aranceles, agricultura, industria automotriz, industria textil y petroquímica, entre otros. Incluye obra visual de Francisco Madrigal, reproduc...

El derecho humano a la educación: proyección en el libre desarrollo de la personalidad

Directory of Open Access Journals (Sweden)

María Candelaria del Pino Padrón

2018-04-01

Full Text Available La educación se constituye en parte fundamental de esa esencia interna del individuo que conforma su personalidad. Así, el libre desarrollo de la personalidad del sujeto se instituye en derecho inalienable vinculado a conocimientos adquiridos y vivencias asimiladas. El ejercicio del derecho a la educación alcanza un indudable valor como coadyuvante del crecimiento intelectual y personal del individuo. Una educación en valores no solamente promueve el libre desarrollo de la personalidad, sino también la autonomía de individuo.

Carbon nano tubes embedded in polymer nano fibers

International Nuclear Information System (INIS)

Dror, Y.; Kedem, S.; Khalfin, R.L.; Paz, Y.; Cohenl, Y.; Salalha, Y.; Yarin, A.L.; Zussman, A.

2004-01-01

Full Text: The electro spinning process was used successfully to embed Multi-walled carbon nano tubes (MWCNTs) and single-walled carbon nano tubes (SWCNTs) in a matrix of poly(ethylene oxide) (PEO) forming composite nano fibers. Initial dispersion of SWCNTs in water was achieved by the use of an amphphilic alternating copolymer of styrene and sodium maleate. MWNT dispersion was achieved by ionic and nonionic surfactants. The distribution and conformation of the nano tubes in the nano fibers were studied by transmission electron microscopy (TEM). Oxygen plasma etching was used to expose the nano tubes within the nano fibers to facilitate direct observation. Nano tube alignment within the nano fibers was shown to depend strongly on the quality of the initial dispersions. Well-dispersed and separated nano tubes were embedded in a straight and aligned form while entangled non-separated nano tubes were incorporated as dense aggregates. X-ray diffraction demonstrated a high degree of orientation of the PEO crystals in the electro spun nano fibers with embedded SWCNTs, whereas incorporation of MVCNTs had a detrimental effect on the polymer orientation. Composite polymer nano fibers containing dispersed phases of nanometric TiO 2 particles and MWCNTs were also prepared electro spinning. In this case, the polymer matrix was poly(acrylonitrile) (PAN). The morphology and possible applications of these composite nano fibers will be discussed

Green synthesis of metal nanoparticles: biodegradable polymers and enzymes in stabilization and surface functionalization

Science.gov (United States)

Current breakthroughs in green nanotechnology are capable to transform many of the existing processes and products that enhance environmental quality, reduce pollution, and conserve natural and non-renewable resources. Noteworthy, successful use of metal nanoparticles and 10 nano...

Mecánica Cuántica y Libre Albedrío: Cinco Cuestiones Fundamentales

Directory of Open Access Journals (Sweden)

José Manuel Muñoz

2015-04-01

Full Text Available http://dx.doi.org/10.5007/1808-1711.2015v19n1p65 Este trabajo analiza críticamente la situación de la mecánica cuántica en las discusiones sobre el libre albedrío. Comienza describiendo cómo el principio de incertidumbre y el problema de la medición plantean un desafío al determinismo. A continuación, presenta las posiciones de apoyo y el rechazo de correlación entre los fenómenos y el libre albedrío cuántico. Por último,  pone todas estas cuestiones en el contexto de las cinco preguntas clave levantadas por Robert Kane: la compatibilidad, de significación, la inteligibilidad, la existencia y el la cuestión de determinismo.

El potencial del software libre en la gestión de información en bibliotecas

Directory of Open Access Journals (Sweden)

Juan Manuel Zurita Sánchez

2010-06-01

Full Text Available El presente artículo expone los fundamentos éticos y tecnológicos que dieron origen al movimiento del software libre, así como la relación que este movimiento guarda con el mundo de las bibliotecas y el manejo de información digital. A su vez presenta algunas de las aplicaciones más populares de software libre que existen para la gestión de información en bibliotecas, a fin de mostrar los alcances y posibilidades que dichas aplicaciones tienen en la creación de sistemas de información a bajo costo, acordes con el ideal de un ciberespacio público.

¿Eran ciudadanos los afrodescendientes libres en las sociedades esclavistas? Cuba, Brasil y Estados Unidos en el siglo XIX

Directory of Open Access Journals (Sweden)

Jochen Kemner

2012-09-01

Full Text Available Se analiza el tema del estatus de los afrodescendientes libres en las sociedades esclavistas más pobladas de América, desde el punto de vista de los derechos políticos y sociales de súbditos y ciudadanos. Con la carta de libertad, los antiguos esclavos y sus descendientes libres adquirieron teóricamente los mismos derechos y obligaciones que la población blanca eurodescendiente. Sin embargo, por razones de “seguridad pública” y de “mantención del orden establecido”, en la práctica, se establecieron restricciones y privilegios para mantener la distancia social entre blancos y afrodescendientes. Desde una perspectiva comparada se estudian Brasil, Cuba y los Estados Unidos, las tres sociedades esclavistas más notorias en América durante el siglo XIX, y se examina este proceso tomando como objetos de análisis los derechos de libre movimiento, el acceso a la enseñanza superior, el sufragio y la propiedad.

Liquid radiation detectors based on nano-silver surface plasmon resonance phenomena

International Nuclear Information System (INIS)

Puiso, J.; Laurikaitiene, J.; Adliene, D.; Prosycevas, I.

2010-01-01

The rapid development of micro- and nano-structures containing silver nano-particles is based on their unique physical properties. Despite the new applications of silver nano-particles in nano-medicine are under heavy discussions, silver nano-particles could be used in liquid radiation detectors thanks to the irradiation-induced surface plasmon resonance (SPR) phenomena observed in the colloidal solutions. Silver nitrate (1 mM AgNO 3 ) and sodium citrate (1 wt% and 5 wt% C 6 H 5 O 7 Na 3 ) were used as precursors for the fabrication of colloidal solutions. Prepared solutions were exposed to gamma-rays from a 60 Co gamma therapy unit 'Rokus-M' to varying absorbed doses, from 2 to 250 Gy. A UV/VIS/NIR spectrometer (Avantes-2048) was used for the measurement of the optical properties (absorbance) of the silver solutions. It was found that an initial absorbed dose of 2 Gy induced the formation of spherical silver nano-particles as it was indicated in the absorbance spectrum of the solution, which had a well-pronounced absorption maximum at the wavelength of 410 nm. There is a potential to measure absorbed doses down to around 20 mGy. The SPR peaks at the wavelengths of 500-700 nm were found at the highest investigated doses > 100 Gy, indicating the presence of silver nano-rods. The colour of colloidal solutions ranged from pale yellow to green and was dependent on the absorbed dose. The investigation has shown that density, size and shape of synthesised silver nano-particles are dependent on the absorbed dose and that shape transformations of the particles due to irradiation are possible. Application of colloidal solutions containing silver nano-particles for dosimetric purposes is discussed on the basis of the obtained results. (authors)

Experiencia en reconstrucción de tercio distal de pierna con colgajo libre de músculo gracilis

Directory of Open Access Journals (Sweden)

A. Conejero

2013-09-01

Full Text Available En los defectos de cobertura distales de la pierna con exposición ósea o articular, la transferencia de tejidos libres es frecuentemente la única opción viable. Se utilizan en el rescate de extremidades inferiores en riesgo por trauma, infección, ulceración, quemaduras y tumores. El colgajo libre de músculo gracilis está descrito en la literatura como una excelente alternativa. El objetivo de este estudio es describir las características de los pacientes y resultados de la utilización del colgajo libre de músculo gracilis en la reconstrucción del tercio distal de la pierna. Se trata de un estudio retrospectivo, observacional, de revisión de archivo clínico y fotográfico de 7 pacientes operados por los autores entre los años 2007-2010, 4 hombres y 3 mujeres con un promedio de edad de 38,5 años. El defecto de cobertura que motivó la cirugía (de hasta de 20 x 6 cm fue secundario a fractura expuesta (tipo III de Gustilo y a osteomielitis crónica. La cobertura del colgajo se hizo en todos los casos con injerto dermo-epidérmico. No hubo complicaciones menores ni mayores del sitio donante ni del receptor, con resultados funcionales y estéticos satisfactorios. El colgajo libre de músculo gracilis es una muy buena alternativa para la reconstrucción distal de pierna con defectos de cobertura en fracturas expuestas y osteomielitis o en úlceras crónicas. Tras el seguimiento, todos nuestros pacientes lograron una cobertura completa y estable en el tiempo.

Plate-forme d'outils en logiciel libre pour l'enseignement supérieur ...

International Development Research Centre (IDRC) Digital Library (Canada)

POLLES) vise à mettre en place un réseau d'experts en logiciels libres afin de développer des outils informatiques pour l'usage des universités nord africaines. Trois sortes d'outils seront développées : des logiciels d'infrastructure technologique ...

Nano-materials Enabled Thermoelectricity from Window Glasses

KAUST Repository

Inayat, Salman Bin

2012-11-13

With a projection of nearly doubling up the world population by 2050, we need wide variety of renewable and clean energy sources to meet the increased energy demand. Solar energy is considered as the leading promising alternate energy source with the pertinent challenge of off sunshine period and uneven worldwide distribution of usable sun light. Although thermoelectricity is considered as a reasonable renewable energy from wasted heat, its mass scale usage is yet to be developed. Here we show, large scale integration of nano-manufactured pellets of thermoelectric nano-materials, embedded into window glasses to generate thermoelectricity using the temperature difference between hot outside and cool inside. For the first time, this work offers an opportunity to potentially generate 304 watts of usable power from 9 m2 window at a 206C temperature gradient. If a natural temperature gradient exists, this can serve as a sustainable energy source for green building technology.

Accelerated effects of nano-ZnO on phosphorus removal by Chlorella vulgaris: Formation of zinc phosphate crystallites.

Science.gov (United States)

Xiao, Huaixian; Liu, Na; Tian, Ke; Liu, Shixiang; Ge, Fei

2018-09-01

Nanoparticles have been reported to induce toxicity to aquatic organisms, however, their potential impacts on phosphorus removal from wastewater by algae are unclear. In this study, the effects of nanoparticle ZnO (nano-ZnO) on phosphate (PO 4 3- ) removal by a green alga Chlorella vulgaris were investigated. We found that PO 4 3- removal efficiency was accelerated with high concentrations of nano-ZnO (0.04-0.15mM) but reduced with low concentrations of nano-ZnO (0.005-0.04mM) compared to the control (without nano-ZnO), suggesting that PO 4 3- removal efficiency by C. vulgaris was related to nano-ZnO concentrations. Moreover, we observed changes of nano-ZnO morphology and detected element P on the surface of nano-ZnO by using transmission electronic microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDX), indicating that PO 4 3- was interacted with nano-ZnO or the dissolved Zn 2+ from nano-ZnO. Furthermore, we confirmed this interaction induced the formation of Zn 3 (PO 4 ) 2 crystallites sedimentation by employing X-ray diffraction analysis (XRD) and X-ray photoelectron spectroscopy (XPS), which finally accelerates the removal of PO 4 3- . Copyright © 2018 Elsevier B.V. All rights reserved.

Capacidades físicas condicionales del éxito en lucha: diferencias entre libre olímpica y grecorromana

Directory of Open Access Journals (Sweden)

José María López Gullón

2013-09-01

Full Text Available Este estudio analizó los componentes del rendimiento físico, psicológico y antropométrico que diferenciaban los luchadores de las modalidades masculina (libre olímpica y grecorromana y femenina (libre femenina entre los niveles competitivos de élite y amateur, así como las diferencias en el perfil psicológico, fisiológico, neuromuscular, antropométrico, de velocidad y extensibilidad muscular que podían existir entre las diferentes categorías de peso en un total de 92 luchadores varones y 35 mujeres altamente entrenados.

EDITORIAL: Ensuring sustainability with green nanotechnology Ensuring sustainability with green nanotechnology

Science.gov (United States)

Wong, Stanislaus; Karn, Barbara

2012-07-01

Nanotechnology offers immense promise for developing new technologies that are more sustainable than current technologies. All major industrial sectors have felt nanotechnology's impact, mainly from the incorporation of nanomaterials into their products. For example, nanotechnology has improved the design and performance of products in areas as diverse as electronics, medicine and medical devices, food and agriculture, cosmetics, chemicals, materials, coatings, energy, as well as many others. Moreover, the revenues from nanotechnology-enabled products are not trivial. For instance, Lux Research maintains that commercial sales in both Europe and the USA will attain revenues of over 1 trillion from nano-enabled products by 2015. The manufacturing of the nanomaterials for these products uses many processes equivalent to chemical manufacturing processes. As a result, manufacturing nanomaterials can produce either harmful pollutants or adverse environmental impacts similar to those from chemical manufacturing. Unlike the chemical industry, however, those same processes are not ingrained in the manufacturing of nanomaterials, and the opportunity exists at the initial design stage to purposely account for and mitigate out potentially harmful environmental impacts. While prevention has not been a priority in current industries, it can become a main concern for the new and future industries that manufacture nanomaterials on a bulk commercial scale. This is where green nanotechnology comes in. Green nanotechnology involves deliberate efforts aimed at developing meaningful and reasonable protocols for generating products and their associated production processes in a benign fashion. The goal is a conscious minimization of risks associated with the products of nanoscience. The green products of nanotechnology are those that are used in either direct or indirect environmental applications. Direct environmental applications provide benefits such as monitoring using nano

Herramientas libres para modelar software Free tools to model software

Directory of Open Access Journals (Sweden)

Mauro Callejas Cuervo Óscar Yovany Baquero Moreno

2010-11-01

Full Text Available Observación acerca del  software libre y de suimplicación en procesos de desarrollo de  softwarecon herramientas 4G por parte de entidades opersonas sin capitales astronómicos y sin lamentalidad acaparadora de dominar el mercado conproductos costosos que las hagan multimillonarias yque no ofrecen una garantía real, ni la posibilidadsiquiera de conocer el  software por el que se hapagado, y mucho menos de modificarlo si no cumplenuestras expectativas.

Low Energy Dissipation Nano Device Research

Science.gov (United States)

Yu, Jenny

2015-03-01

The development of research on energy dissipation has been rapid in energy efficient area. Nano-material power FET is operated as an RF power amplifier, the transport is ballistic, noise is limited and power dissipation is minimized. The goal is Green-save energy by developing the Graphene and carbon nantube microwave and high performance devices. Higher performing RF amplifiers can have multiple impacts on broadly field, for example communication equipment, (such as mobile phone and RADAR); higher power density and lower power dissipation will improve spectral efficiency which translates into higher system level bandwidth and capacity for communications equipment. Thus, fundamental studies of power handling capabilities of new RF (nano)technologies can have broad, sweeping impact. Because it is critical to maximizing the power handling ability of grephene and carbon nanotube FET, the initial task focuses on measuring and understanding the mechanism of electrical breakdown. We aim specifically to determine how the breakdown voltage in graphene and nanotubes is related to the source-drain spacing, electrode material and thickness, and substrate, and thus develop reliable statistics on the breakdown mechanism and probability.

Architecture, des normes et des systèmes d'information libres, phase ...

International Development Research Centre (IDRC) Digital Library (Canada)

Architecture, des normes et des systèmes d'information libres, phase II (OASIS II) - Renforcement des capacités dans l'ensemble de l'Afrique. Sur presque tout le continent africain, la prestation des services de santé est limitée en raison des maigres ressources disponibles et de la charge de morbidité de plus en plus ...

Ocupación del tiempo libre del alumnado en la universidad de Huelva. [Use of student´s free time at the University of Huelva

Directory of Open Access Journals (Sweden)

Estefanía Castillo Viera

2009-12-01

Full Text Available Resumen Existen estudios señalan cuáles son las actividades que la población joven realiza durante su tiempo libre. En este trabajo, se muestran las actividades que el alumnado universitario realiza, así como las que les gustaría realizar pero no hacen. Se parte de un estudio más amplio sobre estilo de vida, y en este caso se analiza una de las dimensiones del cuestionario utilizado, en concreto "tiempo libre". Con un nivel de confianza del 95% y un error máximo del 3% la muestra seleccionada es de 975 alumnos. Algunas de las categorías analizadas son: cantidad de tiempo libre, grado de satisfacción con dicha cantidad de tiempo libre, tiempo dedicado a diversas actividades, y consumo de deporte como espectáculo en su tiempo libre. Entre los resultados, se puede destacar que casi la mitad del alumnado tiene entre dos y tres horas de tiempo libre al día. Los que practican actividad física manifiestan que tienen más tiempo libre que los no activos, existiendo diferencias significativas. Por orden de prioridad, las actividades que les gustaría hacer en su tiempo libre son: estar con la familia, hacer deporte, escuchar música, entre otras. Palabras clave: Tiempo libre, universitarios, deporte.   Abstract There are studies indicate which are the activities that the young population realizes during their free time. We show the activities that the university student body realizes, as well as those that they would like to realize but they do not do. We depart from a more wide study on way of life, and in this case we centre on one of the dimensions of the used questionnaire, in concretely "free time ". On a population of 11314 pupils / aces, one administers the questionnaire to a sample of 975. Some of the analyzed categories are: quantity of free time, degree of satisfaction with the above mentioned quantity of free time, time dedicated to diverse activities, and consumption of sport like spectacle in free time. Some of the results are

Ocupación del tiempo libre del alumnado en la universidad de Huelva. [Use of student´s free time at the University of Huelva

Directory of Open Access Journals (Sweden)

Estefanía Castillo Viera

2009-12-01

Full Text Available Resumen Existen estudios señalan cuáles son las actividades que la población joven realiza durante su tiempo libre. En este trabajo, se muestran las actividades que el alumnado universitario realiza, así como las que les gustaría realizar pero no hacen. Se parte de un estudio más amplio sobre estilo de vida, y en este caso se analiza una de las dimensiones del cuestionario utilizado, en concreto "tiempo libre". Con un nivel de confianza del 95% y un error máximo del 3% la muestra seleccionada es de 975 alumnos. Algunas de las categorías analizadas son: cantidad de tiempo libre, grado de satisfacción con dicha cantidad de tiempo libre, tiempo dedicado a diversas actividades, y consumo de deporte como espectáculo en su tiempo libre. Entre los resultados, se puede destacar que casi la mitad del alumnado tiene entre dos y tres horas de tiempo libre al día. Los que practican actividad física manifiestan que tienen más tiempo libre que los no activos, existiendo diferencias significativas. Por orden de prioridad, las actividades que les gustaría hacer en su tiempo libre son: estar con la familia, hacer deporte, escuchar música, entre otras. Palabras clave: Tiempo libre, universitarios, deporte.   Abstract There are studies indicate which are the activities that the young population realizes during their free time. We show the activities that the university student body realizes, as well as those that they would like to realize but they do not do. We depart from a more wide study on way of life, and in this case we centre on one of the dimensions of the used questionnaire, in concretely "free time ". On a population of 11314 pupils / aces, one administers the questionnaire to a sample of 975. Some of the analyzed categories are: quantity of free time, degree of satisfaction with the above mentioned quantity of free time, time dedicated to diverse activities, and consumption of sport like spectacle in free time. Some of the results are

Diaryl fluorene-Based Shape-Persistent Organic Nano molecular Frameworks via Iterative Friedel-Crafts Protocol toward Multicomponent Organic Semiconductors

International Nuclear Information System (INIS)

Zhang, G.W.; Wang, L.; Xie, L.H.; Hou, X.Y.; Liu, Z.D.; Huang, W.; Huang, W.

2013-01-01

We describe bottom-up fluorenol approach to create soluble covalent organic nano molecular architectures (ONAs) as potential multicomponent organic semiconductors (MOSs). BPyFBFFA as a typical model of ONAs and MOSs exhibits a persistent chair-shaped geometric structure that consists of hole-transporting tri phenylamine (TPA), high-efficiency ter fluorene, and high-mobility pyrenes. BPyFBFFA was synthesized via the intermediates PyFA and BPyFA with iterative Friedel-Crafts reactions and Suzuki cross-coupling reactions. BPyFBFFA behaves as an efficient blue light-emitter without the low-energy green emission band. Complex diaryl fluorenes (CDAFs) are promising candidates for nano scale covalent organic frameworks and MOSs. Friedel-Crafts protocols offer versatile toolboxes for molecular architects to frame chemistry and materials, nano science, and molecular nano technology as well as molecular manufactures

NanoRisk - A Conceptual Decision Support Tool for Nanomaterials

DEFF Research Database (Denmark)

Hansen, Steffen Foss; Baun, Anders; Alstrup Jensen, K.

2011-01-01

Only a few risk assessment methodologies and approaches are useful for assessing the risk for professional end-users, consumers and the environment. We have developed a generic framework (NanoRiskCat) that can be used by companies and risk assessors to categorize nanomaterials considering existing...... environmental, health and safety information and known uncertainties. In NanoRiskCat’s simplest form, the final evaluation outcome for a specific nanomaterial in a given application will be communicated in the form of a short title (e.g. TiO2 in sunscreen) describing the use of the nanomaterial. This short...... to the exposure and hazard potential are green , yellow corresponding to none, possible, expected and unknown, respectively. The exposure potential was evaluated based on 1) the location of the nanomaterial and 2) a judgment of the potential of nanomaterial exposure based on the description and explanation...

Método práctico para determinar protoporfirina libre eritrocitaria como marcador biológico ante la exposición a plomo inorgánico

Directory of Open Access Journals (Sweden)

Gloria Marilé Ávalos Ávalos

2014-10-01

Full Text Available Introducción: para la evaluación de la exposición ocupacional a plomo inorgánico se utilizan diversos biomarcadores de exposición, entre ellos la determinación de plomo en sangre y la de protoporfirina libre eritrocitaria. Objetivo: determinar la fiabilidad práctica y comparativa de un método espectrofotométrico sencillo para determinar protoporfirina libre en eritrocitos como marcador biológico de la exposición a plomo inorgánico. Métodos: se estudiaron a 40 trabajadores expuestos a plomo con diferentes niveles, a cada uno de ellos se les tomó una muestra de sangre para determinar protoporfirina libre eritrocitaria y plomo, y una muestra de orina para determinar ácido aminolevulínico. Se seleccionó un grupo control de 20 trabajadores no expuestos, donde se correlacionaron las concentraciones halladas de protoporfirina libre eritrocitaria y de ácido aminolevulínico con las de plomo en sangre. Resultados: la correlación entre las concentraciones de protoporfirina libre eritrocitaria y las de plomo en sangre fue mayor y más significativa estadísticamente en los trabajadores expuestos, que la encontrada entre el ácido aminolevulínico y el plomo en sangre de los no expuestos. La técnica propuesta de determinación de protoporfirina libre eritrocitaria, además de resultar exacta, precisa y sensible, es sencilla de realizar en, prácticamente cualquier laboratorio químico con un mínimo de recursos. Conclusiones: la técnica propuesta es confiable y puede ser utilizada en una primera opción en el control higiénico-sanitario de la exposición ocupacional a plomo inorgánico, acudiéndose solamente, de ser imprescindible, a la determinación de plomo en sangre cuando las concentraciones de protoporfirina libre eritrocitaria resulten significativamente altas.

Supported nano gold as a recyclable catalyst for green, selective and efficient oxidation of alcohol using molecular oxygen

Directory of Open Access Journals (Sweden)

Bashir Dar

2011-09-01

Full Text Available The myth that gold cannot act as a catalyst has been discarded in view of recent studies, which have demonstrated the high catalytic efficiency of pure nano-gold and supported nano-gold catalysts. In recent years, numerous papers have described the use of supported nano-gold particles for catalysis in view of their action on CO and O2 to form CO2, as well as a variety of other reactions. Special emphasis is placed on the oxidation studies undertaken on model nano-Au systems. In this work a solvent free oxidation of 1-phenyl ethanol was carried out using gold supported on ceria-silica, ceria-titania, ceria- zirconia and ceria-alumina at 160 0C. Almost 88-97% conversion was obtained with >99% selectivity. Temperature screening was done from 70 to 160 0C.Catalysts were prepared by deposition co-precipitation method and deposition was determined by EDEX analysis.

Demandas-control y salud: El rol mediador del tiempo libre

OpenAIRE

Londoño Londoño, María Eugenia; Cifre, Eva; Rosel Remírez, Jesús

2016-01-01

Esta investigación explora el papel mediador que tiene la utilización del tiempo libre en la relación existente entre las altas demandas mentales y el escaso control en el trabajo y las respuestas de engagement, burnout y sintomatología percibida. Participantes: 9.090 trabajadores y trabajadoras de 13 empresas colombianas. Metodología: verificación por medio de análisis de ecuaciones estructurales siguiendo los pasos propuestos por Baron y Kenny (2014). Resultados: disponer de tie...

¿COLOMBIA DEBE APOSTARLE AL SOFTWARE LIBRE, AL DE FUENTE ABIERTA O AL PROPIETARIO?

Directory of Open Access Journals (Sweden)

Luis Alberto Girón Murillo

2014-06-01

Full Text Available Es complejo para gestores y administradores conocer las implicaciones que la adopción de modelos de desarrollo de software tendría para una región. Este artículo ofrece una evaluación de las implicaciones dinámicas que para el desarrollo de software de una región tendría el apostar de forma excluyente al software libre, al software de fuente abierta y al software propietario. Se desarrolló un modelo de simulación en Vensim de la dinámica de sistemas en donde se evaluaron 3 escenarios: uno en donde se adopta de forma excluyente el software libre, uno en donde se adopta el software propietario y uno en donde se adopta el software de fuente abierta. Se ofrecen descripciones y explicaciones de los resultados que sugieren las potencialidades de cada uno de los modelos de desarrollo evaluados.

Tratado de libre comercio entre Colombia y los Estados Unidos desde el análisis económico del derecho

OpenAIRE

Aldana Carrillo, Diego David

2015-01-01

El presente trabajo es una aproximación al Tratado de Libre Comercio entre Colombia y los Estados Unidos desde el Análisis Económico del Derecho. Inicialmente se reconstruye la normativa del acuerdo y sus funciones económicas fundamentales, contextualizando el libre comercio con Estados Unidos desde una perspectiva comparada, y analizando su papel tanto en el ámbito de la economía globalizada como en el ordenamiento jurídico nacional. Posteriormente se realiza una aproximación conceptual al A...

Legitimidad y finalidad de los capítulos de propiedad intelectual en los tratados de libre comercio (TLC

Directory of Open Access Journals (Sweden)

Susy Frankel

2011-11-01

Full Text Available Una visión analítica de la realidad actual permite apreciar un auge de los Tratados de Libre Comercio, mientras se presenta un estancamiento en las negociaciones multilaterales de comercio. Si bien la negociación de los TLC no se limita a los países desarrollados, los negociados por los países en desarrollo no tienden a contemplar mejoras en los estándares de propiedad intelectual. Algunos de los capítulos relativos a la propiedad intelectual incluidos en los Tratados de Libre Comercio simplemente reafirman los estándares del acuerdo sobre los ADPIC, mientras que otros se orientan a ampliar el cubrimiento y alcance de los derechos internacionales de propiedad intelectual. El presente artículo se concentra en estudiar la legitimidad y la finalidad de los capítulos de propiedad intelectual en los Tratados de Libre Comercio, así como la relación entre los capítulos sobre propiedad intelectual y el sistema multilateral de la Organización Mundial del Comercio (OMC que facilita los TLC y los límites racionales de la propiedad intelectual en el contexto comercial.

EL RESURGIMIENTO DEL PROTECCIONISMO, DONALD TRUMP Y EL LIBRE COMERCIO

Directory of Open Access Journals (Sweden)

Julio Cesar César Valdés

2017-12-01

Full Text Available El presente documento es una revisión bibliográfica que comienza con una revisión del cómo el proteccionismo fue vinculado con varias hipótesis económicas desde los siglos XII y XIII, como el mercantilismo, pues muchos lo consideraban ventajoso. Se tiene por objetivo, el análisis, desde una perspectiva crítica, del surgimiento y desarrollo del proteccionismo y su contraposición con el libre comercio, y de esta forma, lograr polarizar criterios al respecto. Se aborda además todo lo referente al proteccionismo económico y a su sucesor, el neoproteccionismo. Como aporte de la presente investigación se indagan las ventajas y desventajas del proteccionismo y del libre comercio, analizando cómo ambos permiten una polarización de las relaciones económicas internacionales y cómo esta situación coarta a los gobiernos en cuanto a su capacidad de actuación. Los resultados del trabajo examinan elementos tales como: la actual crisis económica, las bases del proteccionismo económico, la experiencia de países como Inglaterra y Estados Unidos en la aplicación de medidas proteccionistas, para llegar a plantear que es en el proteccionismo precisamente donde se apoya Donald Trump para configurar las medidas económicas de su gobierno. Además, se exponen características proteccionistas del actual presidente, con énfasis en las tres más criticadas: restablecer el proteccionismo económico, disminuir los impuestos y construir un muro en la frontera con México; prestándole especial interés a la primera. Finalmente el trabajo concluye bajo la óptica de las ventajas del libre comercio, dejando en claro que el proteccionismo no es la fórmula más idónea para sacar adelante las economías de nuestros países, como muchos nos quieren dar a entender. Eso se logra con medidas reales a favor de las economías más débiles y mediante un fuerte rediseño de las normas comerciales actuales, para que el sistema de comercio se reoriente hacia la

Application of various types of alumina and nano--alumina sulfuric acid in the synthesis of α-aminonitriles derivatives: comparative study

Directory of Open Access Journals (Sweden)

A. Teimouri

2014-09-01

Full Text Available An efficient and green protocol for the synthesis of α-aminonitrile derivatives by one-pot reaction of different aldehydes with amines and trimethylsilyl cyanide has been developed using natural alumina, alumina sulfuric acid (ASA, nano-g-alumina, nano-g-alumina sulfuric acid (nano-g-ASA under microwave irradiation and solvent-free conditions. The advantages of methods are short reaction times, high yields, milder conditions and easy work up. The catalysts can be recovered for the subsequent reactions and reused without any appreciable loss of efficiency. DOI: http://dx.doi.org/10.4314/bcse.v28i3.13

Expansión y presencia de la radio libre en Chiapas, un fenómeno de la globalización

Directory of Open Access Journals (Sweden)

Sarelly Martínez Mendoza

2015-10-01

Full Text Available En Chiapas, Estado fronterizo del sur de México, en 2002 empezaron a surgir radios libres, también conocidas como ilegales, “piratas” o no concesionadas. En 2014, funcionan 130 de estas radiodifusoras, en su mayoría religiosas (68, seguidas por comerciales no concesionadas (41, comunitarias (11, zapatistas (5, municipales (3 y partidistas (2. El objetivo de este trabajo es identificar a estas radiodifusoras, describir su barra programática y formas de operación. A través de entrevistas y monitoreo de programación, principalmente, se ha podido comprender la compleja red de radiocomunicación libre que opera en esta entidad fronteriza, y que la ubica con el número mayor de estaciones de este tipo en México. Aunque fueron localizadas 130 radios libres, la dinámica creciente que han registrado hace pensar que se seguirán multiplicando y que urge conocerlas para establecer mecanismos de diálogo y negociación con las autoridades, ya que ni los operativos policíacos ni el constante acoso de los empresarios establecidos ha cambiado la dinámica creciente. En Chiapas, la radio libre cubre con sus emisiones casi la totalidad del territorio estatal, en algunos lugares, como San Cristóbal de Las Casas, se vive una saturación en el cuadrante, mientras que en otras regiones, sobre todo en La Sierra, se convierten en las únicas ofertas radiofónicas.

Green technology foresight of products and materials - some reflections and results from an ongoing Danish project

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Pedersen, Thomas Thoning; Falch, Morten

2005-01-01

The article presents some methodological and theoretical reflections and some preliminary results from a Danish Green Technology Foresight project about environmental friendly products and materials, where the environmental potentials and risks from three technology areas are analysed: nano- bio...

Libre commercio y desarrollo regional en el norte de México

NARCIS (Netherlands)

Leendert de Bell

2010-01-01

La buena actuación económica de México en los primeros años después de la firma del Tratado de Libre Comercio de América del Norte (TLCAN) con los Estados Unidos y Canadá ha generado mucho interés como ejemplo para los demás países de América Latina en su transición a una economía dirigida por las

LiBr absorption systems integrated with high–efficiency IGSG plant

DEFF Research Database (Denmark)

Rokni, Masoud; Bellomare, Filippo

2015-01-01

vapor compression inverse cycles; waste heat from other systems can in fact be used as an efficient input instead of electrical energy. The opportunity to integrate Li-Br absorption systems with a high-efficiency energy plant was studied; rejected heat from a Municipal Solid Waste Gasification Plant......Over the last few years, the energy demand for cooling systems is increasing; different solutions in fact have been proposed in order to minimize the energetic and environmental impact of this trend. In this direction, absorption cooling systems are recognized as a valid alternative to traditional...

Indentation analysis of nano-particle using nano-contact mechanics models during nano-manipulation based on atomic force microscopy

International Nuclear Information System (INIS)

Daeinabi, Khadijeh; Korayem, Moharam Habibnejad

2011-01-01

Atomic force microscopy is applied to measure intermolecular forces and mechanical properties of materials, nano-particle manipulation, surface scanning and imaging with atomic accuracy in the nano-world. During nano-manipulation process, contact forces cause indentation in contact area between nano-particle and tip/substrate which is considerable at nano-scale and affects the nano-manipulation process. Several nano-contact mechanics models such as Hertz, Derjaguin–Muller–Toporov (DMT), Johnson–Kendall–Roberts–Sperling (JKRS), Burnham–Colton–Pollock (BCP), Maugis–Dugdale (MD), Carpick–Ogletree–Salmeron (COS), Pietrement–Troyon (PT), and Sun et al. have been applied as the continuum mechanics approaches at nano-scale. In this article, indentation depth and contact radius between tip and substrate with nano-particle for both spherical and conical tip shape during nano-manipulation process are analyzed and compared by applying theoretical, semiempirical, and empirical nano-contact mechanics models. The effects of adhesion force, as the main contrast point in different nano-contact mechanics models, on nano-manipulation analysis is investigated for different contact radius, and the critical point is discussed for mentioned models.

Aharonov-Casher effect and quantum transport in graphene based nano rings: A self-consistent Born approximation

Science.gov (United States)

Ghaderzadeh, A.; Rahbari, S. H. Ebrahimnazhad; Phirouznia, A.

2018-03-01

In this study, Rashba coupling induced Aharonov-Casher effect in a graphene based nano ring is investigated theoretically. The graphene based nano ring is considered as a central device connected to semi-infinite graphene nano ribbons. In the presence of the Rashba spin-orbit interaction, two armchair shaped edge nano ribbons are considered as semi-infinite leads. The non-equilibrium Green's function approach is utilized to obtain the quantum transport characteristics of the system. The relaxation and dephasing mechanisms within the self-consistent Born approximation is scrutinized. The Lopez-Sancho method is also applied to obtain the self-energy of the leads. We unveil that the non-equilibrium current of the system possesses measurable Aharonov-Casher oscillations with respect to the Rashba coupling strength. In addition, we have observed the same oscillations in dilute impurity regimes in which amplitude of the oscillations is shown to be suppressed as a result of the relaxations.

Fabrication of metal/semiconductor nanocomposites by selective laser nano-welding.

Science.gov (United States)

Yu, Huiwu; Li, Xiangyou; Hao, Zhongqi; Xiong, Wei; Guo, Lianbo; Lu, Yongfeng; Yi, Rongxing; Li, Jiaming; Yang, Xinyan; Zeng, Xiaoyan

2017-06-01

A green and simple method to prepare metal/semiconductor nanocomposites by selective laser nano-welding metal and semiconductor nanoparticles was presented, in which the sizes, phases, and morphologies of the components can be maintained. Many types of nanocomposites (such as Ag/TiO 2 , Ag/SnO 2 , Ag/ZnO 2 , Pt/TiO 2 , Pt/SnO 2 , and Pt/ZnO) can be prepared by this method and their corresponding performances were enhanced.

Book Review: Nano physics & Nano technology

Directory of Open Access Journals (Sweden)

Abdolkhaled Zaree

2012-12-01

Full Text Available During last decades, there are a lot of emphases on studying material behavior in atomic scale. In most scientific and engineering fields, one can see the effect of nanotechnology. The aim of nanoscience is to design and fabrication of new and applicable materials. Nowadays, Nano is a popular science which chemists, physicist, doctors, engineers, financial managers and environment's fans for creating a good life via nanoscience have a great cooperation with each others. Materials in nano scale such as nanotubes and nanowires have extraordinary properties which by optimization of these properties in nano scale and then develop these properties to macro scale, they've been challenging issues. For instance, materials in nano scale improve mechanical properties of polymers and metallic materials via nano particles and on the other hand by producing a thin film on surfaces improve surface hardening. Besides, nanotechnology is in hi-tech industries such as magnetic devices, surface coating, and biomaterial, material having sensors, polymers, gels, ceramics and intelligent membrane. Nano-carbon tubes are considered intelligent due to the fact that they couple electrochemical and elastic properties simultaneously, hence have greater activation energy density in comparison with other intelligent materials. Studying nanoscience is important because it causes the life to be better. Future Materials and structures will have a lot of outstanding properties. Intelligent machines can repair, recycle and reconstruct themselves. All these features are only possible in nano zone. Nano in engineering science can provide the possibility of making light missiles for exploring space. The reduced weight can be achieved by replacing traditional materials with hybrid nanocomposites.

Towards green loyalty: the influences of green perceived risk, green image, green trust and green satisfaction

Science.gov (United States)

Chrisjatmiko, K.

2018-01-01

The paper aims to present a comprehensive framework for the influences of green perceived risk, green image, green trust and green satisfaction to green loyalty. The paper also seeks to account explicitly for the differences in green perceived risk, green image, green trust, green satisfaction and green loyalty found among green products customers. Data were obtained from 155 green products customers. Structural equation modeling was used in order to test the proposed hypotheses. The findings show that green image, green trust and green satisfaction has positive effects to green loyalty. But green perceived risk has negative effects to green image, green trust and green satisfaction. However, green perceived risk, green image, green trust and green satisfaction also seems to be a good device to gain green products customers from competitors. The contributions of the paper are, firstly, a more complete framework of the influences of green perceived risk, green image, green trust and green satisfaction to green loyalty analyses simultaneously. Secondly, the study allows a direct comparison of the difference in green perceived risk, green image, green trust, green satisfaction and green loyalty between green products customers.

Characteristics Of The Porous Body Sintered By Nano-Sized Fe-Cr-Al Alloy Powder

Directory of Open Access Journals (Sweden)

Lee Su-In

2015-06-01

Full Text Available Porous metal with uniform honeycomb structure was successfully produced by sintering using Fe-Cr-Al nano powder, which was prepared by the pulsed wire evaporation (PWE in ethanol. Its process consisted of the several steps; 1 coating on the surface of polyurethane sponge with the liquid droplets generated from the ethanol-based slurry where the Fe-Cr-Al nano powders were uniformly dispersed, 2 heat treatment of debinding to remove the polyurethane sponge and 3 sintering of the porous green body formed by Fe-Cr-Al nano powders. The strut thickness of porous Fe-Cr-Al was increased by the increase of spraying times in ESP step. Also, The shrinkages and the oxidation resistance of the sintered porous body was increased with increase of sintering temperature. The optimal sintering temperature was shown to 1450°C in views to maximize the oxidation resistance and sinterability.

Concentration and wavelength dependent frequency downshifting photoluminescence from a Tb3+ doped yttria nano-phosphor: A photochromic phosphor

Science.gov (United States)

Yadav, Ram Sagar; Rai, Shyam Bahadur

2018-03-01

In this article, the Tb3+ doped Y2O3 nano-phosphor has been synthesized through solution combustion method. The structural measurements of the nano-phosphor have been carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques, which reveal nano-crystalline nature. The Fourier transform infrared (FTIR) measurements reveal the presence of different molecular species in the nano-phosphor. The UV-Vis-NIR absorption spectrum of the nano-phosphor shows large number of bands due to charge transfer band (CTB) and 4f-4f electronic transitions of Tb3+ ion. The Tb3+ doped Y2O3 nano-phosphor emits intense green downshifting photoluminescence centered at 543 nm due to 5D4 → 7F5 transition on excitation with 350 nm. The emission intensity of the nano-phosphor is optimized at 1.0 mol% concentration of Tb3+ ion. When the as-synthesized nano-phosphor is annealed at higher temperature the emission intensity of the nano-phosphor enhances upto 5 times. The enhancement in the emission intensity is due to an increase in crystallinity of the nano-phosphor, reduction in surface defects and optical quenching centers. The CIE diagram reveals that the Tb3+ doped nano-phosphor samples show the photochromic nature (color tunability) with a change in the concentration of Tb3+ ion and excitation wavelength. The lifetime measurement indicates an increase in the lifetime for the annealed sample. Thus, the Tb3+ doped Y2O3 nano-phosphor may be used in photochromic displays and photonic devices.

Bactericidal assessment of nano-silver on emerging and re-emerging human pathogens.

Science.gov (United States)

Anuj, Samir A; Gajera, Harsukh P; Hirpara, Darshna G; Golakiya, Baljibhai A

2018-04-24

With the threat of the growing number of bacteria resistant to antibiotics, the re-emergence of previously deadly infections and the emergence of new infections, there is an urgent need for novel therapeutic agent. Silver in the nano form, which is being used increasingly as antibacterial agents, may extend its antibacterial application to emerging and re-emerging multidrug-resistant pathogens, the main cause of nosocomial diseases worldwide. In the present study, a completely bottom up method to prepare green nano-silver was used. To explore the action of nano-silver on emerging Bacillus megaterium MTCC 7192 and re-emerging Pseudomonas aeruginosa MTCC 741 pathogenic bacteria, the study includes an analysis of the bacterial membrane damage through Scanning Electron Microscope (SEM) as well as alternation of zeta potential and intracellular leakages. In this work, we observed genuine bactericidal property of nano-silver as compare to broad spectrum antibiotics against emerging and re-emerging mode. After being exposed to nano-silver, the membrane becomes scattered from their original ordered arrangement based on SEM observation. Moreover, our results also suggested that alternation of zeta potential enhanced membrane permeability, and beyond a critical point, it leads to cell death. The leakages of intracellular constituents were confirmed by Gas Chromatography-Mass Spectrometry (GC-MS). In conclusion, the combine results suggested that at a specific dose, nano-silver may destroy the structure of bacterial membrane and depress its activity, which causes bacteria to die eventually. Copyright © 2018 Elsevier GmbH. All rights reserved.

Virus-resembling nano-structures for near infrared fluorescence imaging of ovarian cancer HER2 receptors

Science.gov (United States)

Guerrero, Yadir A.; Bahmani, Baharak; Singh, Sheela P.; Vullev, Valentine I.; Kundra, Vikas; Anvari, Bahman

2015-10-01

Ovarian cancer remains the dominant cause of death due to malignancies of the female reproductive system. The capability to identify and remove all tumors during intraoperative procedures may ultimately reduce cancer recurrence, and lead to increased patient survival. The objective of this study is to investigate the effectiveness of an optical nano-structured system for targeted near infrared (NIR) imaging of ovarian cancer cells that over-express the human epidermal growth factor receptor 2 (HER2), an important biomarker associated with ovarian cancer. The nano-structured system is comprised of genome-depleted plant-infecting brome mosaic virus doped with NIR chromophore, indocyanine green, and functionalized at the surface by covalent attachment of monoclonal antibodies against the HER2 receptor. We use absorption and fluorescence spectroscopy, and dynamic light scattering to characterize the physical properties of the constructs. Using fluorescence imaging and flow cytometry, we demonstrate the effectiveness of these nano-structures for targeted NIR imaging of HER2 receptors in vitro. These functionalized nano-materials may provide a platform for NIR imaging of ovarian cancer.

Virus-resembling nano-structures for near infrared fluorescence imaging of ovarian cancer HER2 receptors

International Nuclear Information System (INIS)

Guerrero, Yadir A; Bahmani, Baharak; Vullev, Valentine I; Anvari, Bahman; Singh, Sheela P; Kundra, Vikas

2015-01-01

Ovarian cancer remains the dominant cause of death due to malignancies of the female reproductive system. The capability to identify and remove all tumors during intraoperative procedures may ultimately reduce cancer recurrence, and lead to increased patient survival. The objective of this study is to investigate the effectiveness of an optical nano-structured system for targeted near infrared (NIR) imaging of ovarian cancer cells that over-express the human epidermal growth factor receptor 2 (HER2), an important biomarker associated with ovarian cancer. The nano-structured system is comprised of genome-depleted plant-infecting brome mosaic virus doped with NIR chromophore, indocyanine green, and functionalized at the surface by covalent attachment of monoclonal antibodies against the HER2 receptor. We use absorption and fluorescence spectroscopy, and dynamic light scattering to characterize the physical properties of the constructs. Using fluorescence imaging and flow cytometry, we demonstrate the effectiveness of these nano-structures for targeted NIR imaging of HER2 receptors in vitro. These functionalized nano-materials may provide a platform for NIR imaging of ovarian cancer. (paper)

Nano- and micro-electromechanical systems fundamentals of nano- and microengineering

CERN Document Server

Lyshevski, Sergey Edward

2005-01-01

NANOTECHNOLOGY AND MICROTECHNOLOGY (NANO- AND MICRO- SCIENCE, ENGINEERING AND TECHNOLOGY), AND BEYOND Introduction and Overview: From Micro- to Nano- and Beyond to Stringo-Scale Introductory Definitions to the Subjects Current Developments and Needs for Coherent Revolutionary Developments Societal Challenges and Implications NANO- AND MICROSCALE SYSTEMS, DEVICES, AND STRUCTURES Sizing Features: From Micro- to Nano-, and from Nano- to Stringo-Scale MEMS and NEMS Definitions Introduction to Taxonomy of Nano- and Microsystem Synthesis and Design Introduction to Design and Optimization of Nano- and Microsystems in the Behavioral Domain NANO- AND MICROSYSTEMS: CLASSIFICATION AND CONSIDERATION Biomimetics, Biological Analogies,and Design of NEMS and MEMS Micro- and Nanoelectromechanical Systems: Scaling Laws and Mathematical Modeling MEMS Examples and MEMS Architectures Introduction to Microfabrication and Micromachining FUNDAMENTALS OF MICROFABRICATION AND MEMS FABRICATION TECHNOLOGIES Introducti...

Nano dentistry

International Nuclear Information System (INIS)

Oh, S.; Park, Y.B.; Kim, S.; Jin, S.

2014-01-01

Nano technology in dentistry has drawn many scientists’ and clinicians’ attention to significant advances in the diagnosis, treatment, and prevention of oral disease. Also, nano materials in dentistry have been studied to overcome the physical and chemical characteristics of conventional dental materials. These interesting facts are the motivation of this special issue. The presented issue provides a variety of topics in the field of dentistry such as novel nano filled composite resin, the cytotoxicity of nanoparticles deposited on orthodontic bands, the osseointegration of 3D nano scaffold, and nano surface treated implant.

Nano-Hydroxyapatite/Fluoridated and Unfluoridated Bioactive Glass Composites: Structural Analysis and Bioactivity Evaluation

International Nuclear Information System (INIS)

Batra, Uma; Kapoor, Seema; Sharma, J. D.

2011-01-01

Biphasic bioceramic composites containing nano-hydroxyapatite (HAP) and nanosized bioactive glasses have been prepared in the form of pellets and have been examined for the effects of bioglass concentrations and sintering temperature on the structural transformations and bioactivity behavior. Pure stoichiometric nano-HAP was synthesized using sol-gel technique. Two bioglasses synthesized in this work--fluoridated bioglass (Cao-P 2 O 5 -Na 2 O 3 -CaF 2 ) and unfluoridated bioglass (Cao-P 2 O 5 -Na 2 O 3 ) designated as FBG and UFBG respectively, were added to nano-HAP with concentrations of 5, 10, 12 and 15%. The average particle sizes of synthesized HAP and bioglasses were 23 nm and 35 nm, respectively. The pellets were sintered at four different temperatures i.e. 1000 deg. C, 1150 deg. C, 1250 deg. C and 1350 deg. C. The investigations involved study of structural and bioactivity behavior of green and sintered pellets and their deviations from original materials i.e. HAP, FBG and UFBG, using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The phase composition of the sintered pellets was found to be non-stoichiometric HAP with α-TCP (tricalcium phosphate) and β-TCP. It was revealed from SEM images that bonding mechanism was mainly solid state sintering for all pellets sintered at 1000 deg. C and 1150 deg. C and also for pellets with lower concentrations of bioglass i.e. 5% and 10% sintered at 1250 deg. C. Partly liquid phase sintering was observed for pellets with higher bioglass concentrations of 12% and 15% sintered at 1250 deg. C and same behaviour was noted for pellets at all concentrations of bioglasses at 1350 deg. C. The sintered density, hardness and compression strength of pellets have been influenced both by the concentration of the bioglasses and sintering temperature. It was observed that the biological HAP layer formation was faster on the green pellets surface than on pure HAP and sintered pellets, showing higher bioactivity in the

Preparation and characterization of green-nano-composite material based on polyaniline, multiwalled carbon nano tubes and carboxymethyl cellulose: For electrochemical sensor applications.

Science.gov (United States)

Gautam, Vineeta; Singh, Karan Pratap; Yadav, Vijay Laxmi

2018-06-01

In this paper, we are presenting the preparation and characterization of "polyaniline/multiwalled carbon nanotubes/carboxymethyl cellulose" based novel composite material. It's morphological, thermal, structural, and electrochemical properties were investigated by using different instrumental techniques. During the in-situ chemical polymerization of aniline in the aqueous suspension of CMC and MWCNTs, the particle size change in two different ways "top to bottom" (low molecular weight oligomers grows in size) and "bottom to top" (long fibers of CMC fragmented in the reaction mixture). The combination of these two processes facilitated the fabrication of an integrated green-nano-composite material. In addition, a little amount of conductive nanofillers (MWCNTs) boosts the electrical and electrocatalytic properties of the material. Electron-rich centers of benzenoid rings exhibited π-π stacking with sp 2 carbon of MWCNTs. CMC dominantly impact on the properties of PANI, negatively charged carboxylate group of CMC ionically bonded with protonated amine/imine. FTIR and Raman analysis confirmed that the material has dominated quinoid units and effective charge transfer. Hydroxyl and carboxyl groups and bonded water molecules of CMC results in a network of hydrogen bonds (which induced directional property). PANI/MWCNTs/CMC have nanobead-like structures (TEM analysis), large surface area, large pore volume, small pore diameter (BET and BJH studies) and good dispersion ability in the aqueous phase. Nanostructures of aligned PANI exhibited excellent electrochemical properties have attracted increasing attention. Modified carbon paste electrode was used for electrocatalytic detection of ascorbic acid (as a model analyte). The sensor exhibited a linear range 0.05 mM-5 mM, sensitivity 100.63 μA mM -1  cm -2 , and limit of detection 0.01 mM. PANI/MWCNTs/CMC is suitable nanocomposite material for apply electroactive/conducting ink and membrane (which could be

Development of the life impact burn recovery evaluation (LIBRE) profile: assessing burn survivors' social participation.

Science.gov (United States)

Kazis, Lewis E; Marino, Molly; Ni, Pengsheng; Soley Bori, Marina; Amaya, Flor; Dore, Emily; Ryan, Colleen M; Schneider, Jeff C; Shie, Vivian; Acton, Amy; Jette, Alan M

2017-10-01

Measuring the impact burn injuries have on social participation is integral to understanding and improving survivors' quality of life, yet there are no existing instruments that comprehensively measure the social participation of burn survivors. This project aimed to develop the Life Impact Burn Recovery Evaluation Profile (LIBRE), a patient-reported multidimensional assessment for understanding the social participation after burn injuries. 192 questions representing multiple social participation areas were administered to a convenience sample of 601 burn survivors. Exploratory factor analysis and confirmatory factor analysis (CFA) were used to identify the underlying structure of the data. Using item response theory methods, a Graded Response Model was applied for each identified sub-domain. The resultant multidimensional LIBRE Profile can be administered via Computerized Adaptive Testing (CAT) or fixed short forms. The study sample included 54.7% women with a mean age of 44.6 (SD 15.9) years. The average time since burn injury was 15.4 years (0-74 years) and the average total body surface area burned was 40% (1-97%). The CFA indicated acceptable fit statistics (CFI range 0.913-0.977, TLI range 0.904-0.974, RMSEA range 0.06-0.096). The six unidimensional scales were named: relationships with family and friends, social interactions, social activities, work and employment, romantic relationships, and sexual relationships. The marginal reliability of the full item bank and CATs ranged from 0.84 to 0.93, with ceiling effects less than 15% for all scales. The LIBRE Profile is a promising new measure of social participation following a burn injury that enables burn survivors and their care providers to measure social participation.

Semiconductor Nano wires and Nano tubes: From Fundamentals to Diverse Applications

International Nuclear Information System (INIS)

Xiong, Q.; Grimes, C.A.; Zacharias, M.; Morral, A.F.; Hiruma, K.; Shen, G.

2012-01-01

Research in the field of semiconductor nano wires (SNWs) and nano tubes has been progressing into a mature subject with several highly interdisciplinary sub areas such as nano electronics, nano photonics, nano composites, bio sensing, optoelectronics, and solar cells. SNWs represent a unique system with novel properties associated to their one-dimensional (1D) structures. The fundamental physics concerning the formation of discrete 1D subbands, coulomb blockade effects, ballistic transport, and many-body phenomena in 1D nano wires and nano tubes provide a strong platform to explore the various scientific aspects in these nano structures. A rich variety of preparation methods have already been developed for generating well-controlled 1D nano structures and from a broad range of materials. The present special issue focuses on the recent development in the mechanistic understanding of the synthesis, the studies on electrical/optical properties of nano wires and their applications in nano electronics, nano photonics, and solar-energy harvesting. In this special issue, we have several invited review articles and contributed papers that are addressing current status of the fundamental issues related to synthesis and the diverse applications of semiconducting nano wires and nano tubes. One of the papers reviews the progress of the top-down approach of developing silicon-based vertically aligned nano wires to explore novel device architectures and integration schemes for nano electronics and clean energy applications. Another paper reviews the recent developments and experimental evidences of probing the confined optical and acoustic phonon in nonpolar semiconducting (Si and Ge) nano wires using Raman spectroscopy. The paper by K. Hiruma et al. spotlights the III semiconductor nano wires and demonstrates selective-area metal organic vapor phase epitaxy grown GaAs/In(Al)GaAs and InP/InAs/InP nano wires with heterojunctions along their axial and radial directions. The paper

Determinación de sílice libre en materias primas para la industria del cemento

Directory of Open Access Journals (Sweden)

Calleja, J.

1965-12-01

Full Text Available Not availableLa existencia de sílice libre en las materias primas y, por lo tanto, en los crudos empleados en la fabricación de cemento Portland es desventajosa por la escasa reactividad de esta sílice, sobre todo si no posee una finura suficiente. La determinación de sílice cuarzosa en tales materiales es decisiva para la buena marcha de la clinkerización en fábricas cuyas materias primas adolecen de la desventaja de contenerla. Los métodos propugnados suelen ser poco reproducibles y precisos, y dan resultados bastante erráticos. En el presente trabajo, y después de haber ensayado diversos métodos citados en la bibliografía, se describe y recomienda un procedimiento, basado en el ataque del material por ácido pirofosfórico. Las variables que juegan en el proceso descrito son el tamaño de grano de la muestra, en particular el de la sílice libre, la temperatura y el tiempo de ataque. En las condiciones que se especifican se consigue una disolución prácticamente total de los silicatos, sin que apenas se· disuelvan las partículas más finas de cuarzo. Con ello se consigue una exactitud y una precisión tal como pone de manifiesto el análisis estadístico de los resultados obtenidos al determinar sílice libre en diversas materias primas y crudos para cemento.

The world of Nano

International Nuclear Information System (INIS)

Noh, Seung Jeong; Hyun, Jun Won; An, Yong Hyeon; Lee, Sung Uk; Jee, Hye Gu; Kim, Young Seon

2006-07-01

The contents of this book are the beginning of nano technology, definition of nano, commercialization of nano technology, prospect of nano technology, survive with nano t-, development strategy of n-t in the U.S, and Japan, Korea, and other countries, comparison of development strategy of n-t among each country, various measurement technology for practical n-t, scanning tunneling microscopy, nano device, carbon nano tube, nano belt and nano wire, application of sensor in daily life, energy, post-Genome period and using as medicine with nano bio technology.

The toxicity of plastic nanoparticles to green algae as influenced by surface modification, medium hardness and cellular adsorption

NARCIS (Netherlands)

Nolte, Tom M.; Hartmann, Nanna B.; Kleijn, Mieke; Garnæs, Jørgen; Meent, van de Dik; Jan Hendriks, A.; Baun, Anders

2017-01-01

To investigate processes possibly underlying accumulation and ecological effects of plastic nano-particles we have characterized their interaction with the cell wall of green algae. More specifically, we have investigated the influence of particle surface functionality and water hardness (Ca2+

Libre comercio en norteamerica. Algunas explicaciones e implicaciones para México

OpenAIRE

Carlos GONZÁLEZ MARTÍNEZ

2009-01-01

RESUMEN: El autor exmina las oportunidades y retos que puede encontrar México en el tratado de Libre Comercio, firmado entre México, Estados Unidos y Canadá. Considera esta integración económica como parte de un proceso más amplio de reforma del Estado y replanteamiento de los vínculos económicos con el exterior.ABSTRACT: The author analizes the opportunities and challenges that the Free Trade Agreement signed by México, The United States and Canada represents for Mexico. This economic integr...

Effects of microplasma arc AISI 316L welds on the corrosion behaviour of pipelines in LiBr cooling systems

International Nuclear Information System (INIS)

Sánchez-Tovar, R.; Montañés, M.T.; García-Antón, J.

2013-01-01

Highlights: •SECM tests reveal differences in electrochemical activity of base and welded alloys. •The highest electrochemical activity is obtained for the welded alloy. •Microplasma arc welding process hinders passivation in lithium bromide. •Microplasma arc welding increases corrosion rate and susceptibility to pitting. •The galvanic pair between base and welded alloys in LiBr is weak. -- Abstract: The effect of microplasma arc welding (MPAW) on the electrochemical and corrosion behaviour of AISI 316L stainless steel tubes has been studied. Scanning electrochemical measurements were performed in sodium chloride to evaluate the difference in the electrochemical activity of base (non-welded) and welded samples. Oxygen reduction rates increase in AISI 316L due to the heat treatment effect induced by welding, indicating a higher electrochemical activity in the welded samples. Additionally, the use of MPA weldments in lithium bromide (LiBr) absorption machines was also analysed at typical operating temperatures and Reynolds numbers. The welding process increases corrosion rates, hinders passivation and increases the susceptibility to pitting attack in LiBr. However, zero-resistance ammeter and localization index measurements show that the galvanic pair generated between the base and welded alloys is weak, both electrodes being in their passive state. Temperature greatly affects the corrosion process

Radicales libres de oxígeno y distress respiratorio agudo

Directory of Open Access Journals (Sweden)

Aracelis E. Dorado Lambert

2000-09-01

Full Text Available Se realizó una revisión acerca de la formación de radicales libres de oxígeno en el organismo, así como el aumento exagerado de su génesis durante la exposición a altas concentraciones de oxígeno y en el desarrollo de la explosión respiratoria que acompaña la fagocitosis. Se analiza además la formación de estos radicales en el pulmón durante la evolución del distress respiratorio agudo. Se abordó, posteriormente, el uso actual, sobre todo en el ámbito internacional, de los antioxidantes y bloqueadores de la lipoperoxidación para disminuir los efectos adversos de los radicales libres. A pesar de estas nuevas medidas, se corrobora que la disminución experimentada en la mortalidad por esta entidad, obedece a la optimización de los cuidados respiratorios, en especial la ventilación mecánica.The formation of free oxygen radicals in the body and the excessive increase of its genesis during exposure to high concentrations of oxygen and in the development of respiratory burst accompanying phagocytosis were reviewed. Also the formation of these radicals in lung during acute respiratory distress was analyzed. Similarly, the present use at the international level of antioxidants and lipoperoxidation blockers to diminish adverse effects of free radicals are addressed in this paper. In spite of these new measures, it was confirmed that the reduction of mortality rate from this disease was due to the improvement of respiratory care particularly the mechanical ventilation.

Comercio internacional, migración e inversión con diferenciación horizontal de productos y libre entrada y salida de firmas.

Directory of Open Access Journals (Sweden)

Hernán Vallejo

2010-05-01

Full Text Available Este documento construye un modelo de carretera circular del mundo con diferenciación horizontal de producto y libre entrada y salida de firmas, para mostrar que un comercio internacional más libre aumenta el bienestar –con preferencias de variedad ideal– por medio de la explotación de economías de escala y de una mejor asignación de recursos, que todos los países participantes ganan con el comercio y que los países más pequeños tienen más que ganar del libre comercio que los países grandes. La resistencia política a la liberación del comercio, a la migración internacional y a la inversión extranjera directa también se estudian con el modelo. Finalmente, el modelo provee una microfundamentación para el uso de curvas de demanda con pendientes constantes y negativas.

Green Synthesis of Organics and Nanomaterials and Sustainable Applications of Nano-Catalysts

Science.gov (United States)

The presentation summarizes our green chemical synthesis activity involving benign alternatives, such as the use of supported reagents, and greener reaction medium in aqueous or solvent-free conditions.1 The synthesis of heterocyclic compounds, coupling reactions, and a variety o...

Sol-hydrothermal synthesis and optical properties of Eu3+, Tb(3+)-codoped one-dimensional strontium germanate full color nano-phosphors.

Science.gov (United States)

Lin, Liangwu; Sun, Xinyuan; Jiang, Yao; He, Yuehui

2013-12-21

Novel near-UV and blue excited Eu(3+), Tb(3+)-codoped one dimensional strontium germanate full-color nano-phosphors have been successfully synthesized by a simple sol-hydrothermal method. The morphologies, internal structures, chemical constitution and optical properties of the resulting samples were characterized using FE-SEM, TEM, HRTEM, EDS, XRD, FTIR, XPS, PL and PLE spectroscopy and luminescence decay curves. The results suggested that the obtained Eu(3+), Tb(3+)-codoped strontium germanate nanowires are single crystal nanowires with a diameter ranging from 10 to 80 nm, average diameter of around 30 nm and the length ranging from tens to hundreds micrometers. The results of PL and PLE spectra indicated that the Eu(3+), Tb(3+)-codoped single crystal strontium germanate nanowires showed an intensive blue, blue-green, green, orange and red or green, orange and red light emission under excitation at 350-380 nm and 485 nm, respectively, which may attributed to the coexistent Eu(3+), Eu(2+) and Tb(3+) ions, and the defects located in the strontium germanate nanowires. A possible mechanism of energy transfer among the host, Eu(3+) and Tb(3+) ions was proposed. White-emission can be realized in a single-phase strontium germanate nanowire host by codoping with Tb(3+) and Eu(3+) ions. The Eu(3+), Tb(3+)-codoped one-dimensional strontium germanate full-color nano-phosphors have superior stability under electron bombardment. Because of their strong PL intensity, good CIE chromaticity and stability, the novel 1D strontium germanate full-color nano-phosphors have potential applications in W-LEDs.

Electrochemical co-reduction synthesis of graphene/nano-gold composites and its application to electrochemical glucose biosensor

International Nuclear Information System (INIS)

Wang, Xiaolin; Zhang, Xiaoli

2013-01-01

Graphical abstract: - Highlights: • Graphene/nano-Au composite was synthesized by electrochemical co-reduction method in one step. • Glucose oxidase achieves direct electrochemistry on the graphene/nano-Au composite film. • The glucose biosensor shows a high sensitivity of 56.93 μA mM −1 cm −2 toward glucose. • Glucose was detected with a wide linear range and low detection limit. - Abstract: A simple, green and controllable approach was employed for electrochemical synthesize of the graphene/nano-Au composites. The process was that graphene oxide and HAuCl 4 was electrochemically co-reduced onto the glassy carbon electrode (GCE) by cyclic voltammetry in one step. The obtained graphene/nano-Au/GCE exhibited high electrocatalytic activity toward H 2 O 2 , which resulted in a remarkable decrease in the overpotential of H 2 O 2 electrochemical oxidation compared with bare GCE. Such electrocatalytic behavior of the graphene/nano-Au/GCE permitted effective low-potential amperometric biosensing of glucose via the incorporation of glucose oxidase (GOD) with graphene/nano-Au. An obvious advantage of this enzyme electrode (graphene/nano-Au/GOD/GCE) was that the graphene/nano-Au nanocomposites provided a favorable microenvironment for GOD and facilitated the electron transfer between the active center of GOD and electrode. The immobilized GOD showed a direct, reversible redox reaction. Furthermore, the graphene/nano-Au/GOD/GCE was used as a glucose biosensor, displaying a low detection limit of 17 μM (S/N = 3), a high sensitivity of 56.93 μA mM −1 cm −2 , acceptable reproducibility, very good stability, selectivity and anti-interference ability

Estudio poblacional de actividad física en tiempo libre Population-based study of leisure time physical activity

Directory of Open Access Journals (Sweden)

Isabel Sobejano Tornos

2009-04-01

Full Text Available Objetivo: Estimar la frecuencia de personas activas en tiempo libre, y la cantidad e intensidad de las actividades que desarrollan según edad, sexo, índice de masa corporal y nivel socioeconómico, en la población adulta de Navarra. Métodos: Estudio transversal en una muestra aleatoria estratificada por edad y sexo de población de 35-84 años: 1.893 hombres y 2.275 mujeres. La tasa de respuesta fue del 73,4%. Se utilizó el cuestionario de actividad física en tiempo libre de Minnesota, validado en población española. Se consideran dos definiciones de persona activa: a tener un gasto energético total diario en tiempo libre > 300 equivalentes metabólicos (MET y b realizar ejercicio físico en actividades > 4 MET al menos 25min diarios las mujeres y 30 los hombres. Resultados: Con ambas definiciones, aproximadamente la mitad de la población de 35-84 años es activa en su tiempo libre. La prevalencia de personas activas (> 300 MET diarios disminuye a partir de los 65 años en las mujeres, sin diferencias por índice de masa corporal, nivel de estudios ni clase social basada en la ocupación. En hombres, ser activo en el tiempo libre se relaciona con tener 65-74 años y pertenecer a la clase social media o baja. Conclusiones: Las mujeres mayores de 65 años y los hombres de clase social alta son los subgrupos de población más susceptibles de ser objeto de intervenciones de fomento de la práctica de actividad física en su tiempo libre en Navarra.Objective: To estimate the frequency of persons who are physically active in their leisure time and the quantity and intensity of their activities in relation to age, sex, body mass index and socioeconomic status in the adult population of Navarre (Spain. Methods: We performed a cross-sectional study in an age and sex stratified random sample of the population aged 35-84 years old (1,893 men and 2,275 women. The response rate was 73.4%. The Minnesota Leisure-Time Physical Activity Questionnaire

Le « problème » de l’adolescence : le loisir contre le temps libre

Directory of Open Access Journals (Sweden)

Joël Zaffran

2011-04-01

Full Text Available En matière de politique publique du loisir des adolescents, deux constats s’imposent : d’une part les dispositifs d’occupation du temps libre sont légion et pléthore de contrats temps libre sont subventionnés par les communes et les collectivités territoriales ; alors qu’un large éventail d’activités est offert aux adolescents pendant le temps périscolaire, les taux de fréquentation restent désespérément faibles d’autre part. Pour cerner les enjeux politiques du loisir des adolescents ainsi que les raisons de la désaffection des structures de loisirs, l’article puise à une diversité de matériaux afin de procéder à une classification des loisirs des adolescent(es à partir du croisement de deux dimensions analytiques : la forme scolaire et l’encadrement. Ces deux axes permettent d’isoler trois types de loisir présenté successivement comme un temps de la perfection, un temps de la formation et un temps de la régulation. La matrice proposée permet ensuite de cerner la nature du temps libre qui, bien que complémentaire aux trois temps précédents, apparaît comme un temps de la subjectivation et ce faisant comme une temporalité impérieuse.The “problem” of teenage: leisure against free timeTwo reports are essential about teenager’s public policy of the leisure: on the one hand the devices of occupation of free time are legion and a plethora of contracts free time are subsidized by cities council and local governments; whereas a large range of activities is offered to the teenagers during extra-curricular time, the rates of frequentation remain hopelessly weak in addition. To determine the policy issues of teenager’s leisure as well as the reasons of the disaffection of the communities centres, the article use a material diversity in order to carry out a classification of teenager’s leisure starting from the crossing of two analytical dimensions: the school form and the social control. These two

Uso de software libre en las empresas colombianas

Directory of Open Access Journals (Sweden)

Carlos Nelson Henrìquez Miranda

2009-01-01

Full Text Available ResumenActualmente las empresas usan la tecnología de punta para apoyar sus procesos comerciales, sin embargo en elámbito local podemos darnos cuenta que existen muchas empresas que no tienen conocimiento de la existenciade herramientas informáticas (software que les ayuden en sus labores empresariales. Algunos empresarios pordesconocimiento adquieren aplicaciones de software (propietario que son muy costosas y las cuales usan en unporcentaje muy bajo de sus verdaderas funcionalidades. Entonces hacen una gran inversión que no es redimibleen el futuro porque necesitan demasiadas asesorías y consultorías de estas empresas que comercializan la herramienta.Además si las empresas van creciendo e incluyen nuevas estaciones de trabajo, se necesita comprarmás software, porque este tipo de producto se vende normalmente bajo el término de licencia propietaria. Entoncesencontramos dos situaciones, aquellas empresas que no invierten en software porque es muy costoso, y aquellasque lo hacen pero a la inversión hecha, que a veces es muy alta, no le sacan provecho real por desconocimiento, odebido a una mala asesoría. Ante esta situación hay que buscar nuevas alternativas para lograr que las empresaspequeñas y medianas logren tener en sus manos todas las bondades que trae el uso de la computación (rapidez,eficiencia, organización entre otras. Una opción para este problema es la adopción de programas que no tienencosto o su costo es relativamente bajo, estos programas están enmarcados en el movimiento conocido como “SoftwareLibre”. Este nace como alternativa para uso de productos de una buena calidad a un bajo costo que permitala sistematización parcial o total de las empresas, además de usar programas ofimáticos para el manejo de lainformación de las oficinas.El uso de Software Libre en las empresas colombianas permitirá aumentar sus nivelesde competitividad, bajando un poco la inversión en software y mantenimiento, logrando una

Catalysis as an important tool of green chemistry

Energy Technology Data Exchange (ETDEWEB)

Beletskaya, Irina P [Department of Chemistry, M.V. Lomonosov Moscow State University, Moscow (Russian Federation); Kustov, Leonid M [N.D.Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, Moscow (Russian Federation)

2010-08-12

Published data of the last decade demonstrating the significant achievements in the catalytic synthesis of organic compounds are analyzed from the green chemistry standpoint. It is demonstrated that the use of new catalysts (including nano-sized ones) and solvents (water, ionic liquids, fluorinated derivatives), microwave processes, superctitical and two-phase media, and heterogenized metal complex catalytic systems should be distinguished among the most promising approaches to such processes. The main applications of metal complex systems are considered, in particular, hydrogenation, partial oxidation and cross-coupling reactions, in particular, enantioselective reactions.

Catalysis as an important tool of green chemistry

International Nuclear Information System (INIS)

Beletskaya, Irina P; Kustov, Leonid M

2010-01-01

Published data of the last decade demonstrating the significant achievements in the catalytic synthesis of organic compounds are analyzed from the green chemistry standpoint. It is demonstrated that the use of new catalysts (including nano-sized ones) and solvents (water, ionic liquids, fluorinated derivatives), microwave processes, superctitical and two-phase media, and heterogenized metal complex catalytic systems should be distinguished among the most promising approaches to such processes. The main applications of metal complex systems are considered, in particular, hydrogenation, partial oxidation and cross-coupling reactions, in particular, enantioselective reactions.

Green Bank Lunar Interferometer for Neutrino Transients: GLINT

Energy Technology Data Exchange (ETDEWEB)

Langston, Glen I. [NRAO, P.O. Box 2, Green Bank, WV 24944 (United States)], E-mail: glangsto@nrao.edu; Bradley, Rich [NRAO, 520 Edgemont Rd, Charlottesville, VA 22901 (United States); Hankins, Tim [New Mexico Institute of Mining and Technology, 801 Leroy Place, Socorro, NM 87801 (United States); Mutel, Bob [University of Iowa, 706 Van Allen Hall, Iowa City, IA 52242 (United States)

2009-06-01

The Green Bank Lunar Interferometer for Neutrino Transients (GLINT) project is a wide band (0.3-2.6 GHz) interferometric radio array dedicated to observations of transient events. The target is detection of few bright (>2000Jy) short duration (few nano-second) pulses from the lunar regolith. The GLINT project has three goals: (1) Maximize detection of statistically significant pulses originating from the lunar surface. (2) Unambiguously differentiate neutrino pulses from other sources of interference. (3) Localize the direction of the incoming radio pulse resulting from neutrino interactions.

Environmental risk assessment of engineered nano-SiO2 , nano iron oxides, nano-CeO2 , nano-Al2 O3 , and quantum dots.

Science.gov (United States)

Wang, Yan; Nowack, Bernd

2018-05-01

Many research studies have endeavored to investigate the ecotoxicological hazards of engineered nanomaterials (ENMs). However, little is known regarding the actual environmental risks of ENMs, combining both hazard and exposure data. The aim of the present study was to quantify the environmental risks for nano-Al 2 O 3 , nano-SiO 2 , nano iron oxides, nano-CeO 2 , and quantum dots by comparing the predicted environmental concentrations (PECs) with the predicted-no-effect concentrations (PNECs). The PEC values of these 5 ENMs in freshwaters in 2020 for northern Europe and southeastern Europe were taken from a published dynamic probabilistic material flow analysis model. The PNEC values were calculated using probabilistic species sensitivity distribution (SSD). The order of the PNEC values was quantum dots nano-CeO 2  nano iron oxides nano-Al 2 O 3  nano-SiO 2 . The risks posed by these 5 ENMs were demonstrated to be in the reverse order: nano-Al 2 O 3  > nano-SiO 2  > nano iron oxides > nano-CeO 2  > quantum dots. However, all risk characterization values are 4 to 8 orders of magnitude lower than 1, and no risk was therefore predicted for any of the investigated ENMs at the estimated release level in 2020. Compared to static models, the dynamic material flow model allowed us to use PEC values based on a more complex parameterization, considering a dynamic input over time and time-dependent release of ENMs. The probabilistic SSD approach makes it possible to include all available data to estimate hazards of ENMs by considering the whole range of variability between studies and material types. The risk-assessment approach is therefore able to handle the uncertainty and variability associated with the collected data. The results of the present study provide a scientific foundation for risk-based regulatory decisions of the investigated ENMs. Environ Toxicol Chem 2018;37:1387-1395. © 2018 SETAC. © 2018 SETAC.

Prunus cerasifera Ehrh. fabricated ZnO nano falcates and its photocatalytic and dose dependent in vitro bio-activity

Directory of Open Access Journals (Sweden)

Jaffri Shaan Bibi

2018-03-01

Full Text Available Zinc oxide nano falcates of sickle shape have been synthesized from Prunus cerasifera pomological extract as a reducing cum stabilizing agent via novel, biomimetic and non-toxic route. Zinc oxide nano falcates were analyzed via ultraviolet spectroscopy, Fourier transform infrared analysis, X-ray powder diffraction, scanning electron microscopy and atomic force microscopy. Highly stable zinc oxide nano falcates synthesized at 200°C and 400°C calcination temperatures expressed intense UV-vis peak at 398 nm. Phenolic and amino groups were revealed by FTIR in pomological extract. Wurtzite crystalline structure of zinc oxide nano falcates was confirmed by XRD with average crystal size of 4.93 nm. SEM sizes ranged between 72.11-120 nm and 56.57-107.70 nm, respectively and shown higher polydispersity levels for two calcination temperatures. Augmented photocatalytic degradation of methyl red and bromophenol blue under direct solar irradiance shown pseudo first order kinetics (R2= 0.99 and 0.96. Furthermore, biomedical and agriculturally important pathogenic strains i.e., Xanthomanas axonopodis pv. citri and Pseudomonas syringae, Aspergillus niger, Aspergillus flavus, Aspergillus fumigatus, Aspergillus terreus, Penicillium chrysogenum, Fusarium solani and Lasiodiplodia theobromae were remarkably inhibited. Enhanced photocatalytic and antimicrobial activity reveals zinc oxide nano falcates promising prospects in nano bioremediation of polluted water and conversion into green nano pesticides.

Electrochemical Behavior of LiBr, LiI, and Li2Se in LiCl Molten Salt

International Nuclear Information System (INIS)

Choi, In Kyu; Do, Jae Bum; Hong, Sun Seok; Seo, Chung Seok

2006-03-01

The effect of fission products on the electrolytic reduction of uranium oxide has been studied. It has been reported that volatile fission products, such as Br, I, and Se, react with Li metal which is a reductant in the process to give LiBr, LiI, and Li 2 Se. These compounds are dissociated as corresponding anions and cations in the LiCl molten salt at 650 .deg. C. In this experiment, oxidation and reduction reaction of 3wt% of each compound in LiCl molten salt were investigated by cyclic voltammetry. For LiBr, redox reactions of cation and anion were reversible, while redox reactions of Li + and I - were irreversible. For Li 2 Se, about half of the produced Li metal was disappeared at the cathode and two anodic current curves were appeared. After the cyclic voltammetric measurements for each compound, chronopotentiometric experiment was carried out for one hour with 100 - 400 mA. After the electrolysis, no compounds gave Li metal in the porous MgO filter in which Li metal was produced at the cathode. However, LiCl salt was covered with Br 2 for LiBr electrolysis. Dark red color of Br 2 was easily removed by water. For LiI electrolysis, salt gave black color and I 2 was deposited on the Pt anode. For Li 2 Se electrolysis, black fine powders were precipitated in the salt. After the separation and dryness of the precipitates, it was analyzed with XRD and it turned out PtSe 2 . From the electrochemical experimental results, it was concluded that these compounds may affect the electrolytic reduction process of uranium oxide in the spent fuel

Green synthesis of hybrid graphene oxide/microcrystalline cellulose aerogels and their use as superabsorbents

Energy Technology Data Exchange (ETDEWEB)

Wei, Xiao; Huang, Ting; Yang, Jing-hui; Zhang, Nan; Wang, Yong, E-mail: yongwang1976@163.com; Zhou, Zuo-wan

2017-08-05

Highlights: • Hybrid GO/MCC aerogels were prepared using LiBr aqueous solution as the solvent. • GO was exfoliated by MCC through the strong interaction between them. • The adsorption ability of GO per unit mass in the hybrid aerogels was greatly enhanced. - Abstract: In this work, we developed a green synthesis method to prepare the hybrid aerogels containing graphene oxide (GO) and microcrystalline cellulose (MCC) using lithium bromide (LiBr) aqueous solution as the solvent, which insured the complete dissolution of MCC. The interaction between GO and MCC was investigated through different methods The results demonstrate that there is a strong interaction between GO and MCC molecules, which promotes the exfoliation of GO in the hybrid aerogels. The hybrid GO/MCC aerogels exhibit typical three dimensional porous structure and the pore morphology can be well adjusted by changing the content of GO. The adsorption ability of the hybrid aerogels was measured using methylene blue (MB) as an adsorbate. The results show that the adsorption ability of GO per unit mass is greatly enhanced compared with the pure GO aerogel, especially at relatively low GO content the adsorption amount of GO per unit mass is enhanced up to 2630 mg/g. Further results demonstrate that the hybrid GO/MCC aerogels still obey the pseudo-second-order adsorption model, which is similar to that of the pure GO aerogel. The mechanism for the amplified adsorption ability of GO in the hybrid GO/MCC aerogels is then analyzed.

Green synthesis of hybrid graphene oxide/microcrystalline cellulose aerogels and their use as superabsorbents

International Nuclear Information System (INIS)

Wei, Xiao; Huang, Ting; Yang, Jing-hui; Zhang, Nan; Wang, Yong; Zhou, Zuo-wan

2017-01-01

Highlights: • Hybrid GO/MCC aerogels were prepared using LiBr aqueous solution as the solvent. • GO was exfoliated by MCC through the strong interaction between them. • The adsorption ability of GO per unit mass in the hybrid aerogels was greatly enhanced. - Abstract: In this work, we developed a green synthesis method to prepare the hybrid aerogels containing graphene oxide (GO) and microcrystalline cellulose (MCC) using lithium bromide (LiBr) aqueous solution as the solvent, which insured the complete dissolution of MCC. The interaction between GO and MCC was investigated through different methods The results demonstrate that there is a strong interaction between GO and MCC molecules, which promotes the exfoliation of GO in the hybrid aerogels. The hybrid GO/MCC aerogels exhibit typical three dimensional porous structure and the pore morphology can be well adjusted by changing the content of GO. The adsorption ability of the hybrid aerogels was measured using methylene blue (MB) as an adsorbate. The results show that the adsorption ability of GO per unit mass is greatly enhanced compared with the pure GO aerogel, especially at relatively low GO content the adsorption amount of GO per unit mass is enhanced up to 2630 mg/g. Further results demonstrate that the hybrid GO/MCC aerogels still obey the pseudo-second-order adsorption model, which is similar to that of the pure GO aerogel. The mechanism for the amplified adsorption ability of GO in the hybrid GO/MCC aerogels is then analyzed.

Chemical Functionalization, Self-Assembly, and Applications of Nano materials and Nano composites 2014

International Nuclear Information System (INIS)

Yan, X.; Jiao, T.; Balan, L.; Chen, X.; Hu, M.Z.; Liu, W.

2014-01-01

The growing interests in nano materials and nano composites call for the development of processing techniques to obtain multiple functionalization nano structures and achieve the tailoring of specific features of the nanometer size. Functional nano materials and nano composites will expand the applied range of the original material and at the same time promote the development of inter discipline. Thus, the chemical functionalization and bottom-up assemblies of nano materials and subsequent applications will accelerate the development of nano science and nano technology.

Expanding Human Capabilities through the Adoption and Utilization of Free, Libre, and Open Source Software

Science.gov (United States)

Simpson, James Daniel

2014-01-01

Free, libre, and open source software (FLOSS) is software that is collaboratively developed. FLOSS provides end-users with the source code and the freedom to adapt or modify a piece of software to fit their needs (Deek & McHugh, 2008; Stallman, 2010). FLOSS has a 30 year history that dates to the open hacker community at the Massachusetts…

Toxicological effects of nanometer titanium dioxide (nano-TiO2) on Chlamydomonas reinhardtii.

Science.gov (United States)

Chen, Lanzhou; Zhou, Lina; Liu, Yongding; Deng, Songqiang; Wu, Hao; Wang, Gaohong

2012-10-01

The toxicological effects of nanometer titanium dioxide (nano-TiO2) on a unicellular green alga Chlamydomonas reinhardtii were assessed by investigating the changes of the physiology and cyto-ultrastructure of this species under treatment. We found that nano-TiO2 inhibited photosynthetic efficiency and cell growth, but the content of chlorophyll a content in algae did not change, while carotenoid and chlorophyll b contents increased. Malondialdehyde (MDA) content reached maximum values after 8h exposure and then decreased to a moderately low level at 72 h. Electron microscopy images indicated that as concentrations of nano-TiO2 increased, a large number of C. reinhardtii cells were noted to be damaged: the number of chloroplasts declined, various other organelles were degraded, plasmolysis occurred, and TiO2 nanoparticles were found to be located inside cell wall and membrane. It was also noted that cell surface was surrounded by TiO2 particles, which could present an obstacle to the exchange of substances between the cell and its surrounding environment. To sum up, the effect of nano-TiO2 on C. reinhardtii included cell surface aggregation, photosynthesis inhibition, lipid peroxidation and new protein synthesis, while the response of C. reinhardtii to nano-TiO2 was a rapid process which occurs during 24 h after exposing and may relate to physiological stress system to mitigate damage. Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.

DEL CONTRATO DE LIBRE DISCUSIÓN AL CONTRATO DE ADHESIÓN

Directory of Open Access Journals (Sweden)

Verónica María Echeverri Salazar

2010-05-01

Full Text Available Este artículo pretenderá explicar los cambios que se han dado desde la concepción tradicional del contrato como un acuerdo paritario entre iguales para crear obligaciones, basado en la libre discusión entre las partes, hasta el contrato masificado de adhesión, que rige hoy en la mayoría de los mercados basado en el gran tráfico de bienes y servicios. Para ello, se identificará la ideología dominante en el contexto en el cual se dio la codificación y la consecuente regulación de los contratos, el tipo de contrato en la concepción clásica, su posterior crisis con la aparición de los contratos masificados y el dirigismo contractual, terminando con una conceptualización de la definición, funciones y naturaleza jurídica de los contratos de adhesión. La metodología que se utilizó fue hermenéutica a partir de los textos de la doctrina latinoamericana que sirvió como matriz de lectura a la normativa nacional vigente. Para esto se utilizaron técnicas de recolección de información documental que fueron organizadas a través del sistema bibliográfico que permitieron el análisis correlacionado de las variables. Las variables utilizadas para desarrollar la investigación fueron el contrato de libre discusión de cláusulas, la autonomía de la voluntad privada y los contratos de adhesión.

Submicron and nano formulations of titanium dioxide and zinc oxide stimulate unique cellular toxicological responses in the green microalga Chlamydomonas reinhardtii

Energy Technology Data Exchange (ETDEWEB)

Gunawan, Cindy, E-mail: c.gunawan@unsw.edu.au [ARC Centre of Excellence for Functional Nanomaterials, School of Chemical Engineering, The University of New South Wales, Sydney, NSW (Australia); Sirimanoonphan, Aunchisa [ARC Centre of Excellence for Functional Nanomaterials, School of Chemical Engineering, The University of New South Wales, Sydney, NSW (Australia); Teoh, Wey Yang [Clean Energy and Nanotechnology (CLEAN) Laboratory, School of Energy and Environment, City University of Hong Kong, Kowloon, Hong Kong Special Administrative Region (Hong Kong); Marquis, Christopher P., E-mail: c.marquis@unsw.edu.au [School of Biotechnology and Biomolecular Sciences, The University of New South Wales, Sydney, NSW (Australia); Amal, Rose [ARC Centre of Excellence for Functional Nanomaterials, School of Chemical Engineering, The University of New South Wales, Sydney, NSW (Australia)

2013-09-15

Highlights: • Uptake of TiO{sub 2} solids by C. reinhardtii generates ROS as an early stress response. • Submicron and nanoTiO{sub 2} exhibit benign effect on cell proliferation. • Uptake of ZnO solids and leached zinc by C. reinhardtii inhibit the alga growth. • No cellular oxidative stress is detected with submicron and nano ZnO exposure. • The toxicity of particles is not necessarily mediated by cellular oxidative stress. -- Abstract: The work investigates the eco-cytoxicity of submicron and nano TiO{sub 2} and ZnO, arising from the unique interactions of freshwater microalga Chlamydomonas reinhardtii to soluble and undissolved components of the metal oxides. In a freshwater medium, submicron and nano TiO{sub 2} exist as suspended aggregates with no-observable leaching. Submicron and nano ZnO undergo comparable concentration-dependent fractional leaching, and exist as dissolved zinc and aggregates of undissolved ZnO. Cellular internalisation of solid TiO{sub 2} stimulates cellular ROS generation as an early stress response. The cellular redox imbalance was observed for both submicron and nano TiO{sub 2} exposure, despite exhibiting benign effects on the alga proliferation (8-day EC50 > 100 mg TiO{sub 2}/L). Parallel exposure of C. reinhardtii to submicron and nano ZnO saw cellular uptake of both the leached zinc and solid ZnO and resulting in inhibition of the alga growth (8-day EC50 ≥ 0.01 mg ZnO/L). Despite the sensitivity, no zinc-induced cellular ROS generation was detected, even at 100 mg ZnO/L exposure. Taken together, the observations confront the generally accepted paradigm of cellular oxidative stress-mediated cytotoxicity of particles. The knowledge of speciation of particles and the corresponding stimulation of unique cellular responses and cytotoxicity is vital for assessment of the environmental implications of these materials.

Submicron and nano formulations of titanium dioxide and zinc oxide stimulate unique cellular toxicological responses in the green microalga Chlamydomonas reinhardtii

International Nuclear Information System (INIS)

Gunawan, Cindy; Sirimanoonphan, Aunchisa; Teoh, Wey Yang; Marquis, Christopher P.; Amal, Rose

2013-01-01

Highlights: • Uptake of TiO 2 solids by C. reinhardtii generates ROS as an early stress response. • Submicron and nanoTiO 2 exhibit benign effect on cell proliferation. • Uptake of ZnO solids and leached zinc by C. reinhardtii inhibit the alga growth. • No cellular oxidative stress is detected with submicron and nano ZnO exposure. • The toxicity of particles is not necessarily mediated by cellular oxidative stress. -- Abstract: The work investigates the eco-cytoxicity of submicron and nano TiO 2 and ZnO, arising from the unique interactions of freshwater microalga Chlamydomonas reinhardtii to soluble and undissolved components of the metal oxides. In a freshwater medium, submicron and nano TiO 2 exist as suspended aggregates with no-observable leaching. Submicron and nano ZnO undergo comparable concentration-dependent fractional leaching, and exist as dissolved zinc and aggregates of undissolved ZnO. Cellular internalisation of solid TiO 2 stimulates cellular ROS generation as an early stress response. The cellular redox imbalance was observed for both submicron and nano TiO 2 exposure, despite exhibiting benign effects on the alga proliferation (8-day EC50 > 100 mg TiO 2 /L). Parallel exposure of C. reinhardtii to submicron and nano ZnO saw cellular uptake of both the leached zinc and solid ZnO and resulting in inhibition of the alga growth (8-day EC50 ≥ 0.01 mg ZnO/L). Despite the sensitivity, no zinc-induced cellular ROS generation was detected, even at 100 mg ZnO/L exposure. Taken together, the observations confront the generally accepted paradigm of cellular oxidative stress-mediated cytotoxicity of particles. The knowledge of speciation of particles and the corresponding stimulation of unique cellular responses and cytotoxicity is vital for assessment of the environmental implications of these materials

Nano-Electrochemistry and Nano-Electrografting with an Original Combined AFM-SECM

Directory of Open Access Journals (Sweden)

Ammar Ben Brahim

2013-05-01

Full Text Available This study demonstrates the advantages of the combination between atomic force microscopy and scanning electrochemical microscopy. The combined technique can perform nano-electrochemical measurements onto agarose surface and nano-electrografting of non-conducting polymers onto conducting surfaces. This work was achieved by manufacturing an original Atomic Force Microscopy-Scanning ElectroChemical Microscopy (AFM-SECM electrode. The capabilities of the AFM-SECM-electrode were tested with the nano-electrografting of vinylic monomers initiated by aryl diazonium salts. Nano-electrochemical and technical processes were thoroughly described, so as to allow experiments reproducing. A plausible explanation of chemical and electrochemical mechanisms, leading to the nano-grafting process, was reported. This combined technique represents the first step towards improved nano-processes for the nano-electrografting.

Nano-Electrochemistry and Nano-Electrografting with an Original Combined AFM-SECM

Science.gov (United States)

Ghorbal, Achraf; Grisotto, Federico; Charlier, Julienne; Palacin, Serge; Goyer, Cédric; Demaille, Christophe; Ben Brahim, Ammar

2013-01-01

This study demonstrates the advantages of the combination between atomic force microscopy and scanning electrochemical microscopy. The combined technique can perform nano-electrochemical measurements onto agarose surface and nano-electrografting of non-conducting polymers onto conducting surfaces. This work was achieved by manufacturing an original Atomic Force Microscopy-Scanning ElectroChemical Microscopy (AFM-SECM) electrode. The capabilities of the AFM-SECM-electrode were tested with the nano-electrografting of vinylic monomers initiated by aryl diazonium salts. Nano-electrochemical and technical processes were thoroughly described, so as to allow experiments reproducing. A plausible explanation of chemical and electrochemical mechanisms, leading to the nano-grafting process, was reported. This combined technique represents the first step towards improved nano-processes for the nano-electrografting. PMID:28348337

Green synthesis of silver nanoparticles using green tea leaves: Experimental study on the morphological, rheological and antibacterial behaviour

Science.gov (United States)

Nakhjavani, Maryam; Nikkhah, V.; Sarafraz, M. M.; Shoja, Saeed; Sarafraz, Marzieh

2017-10-01

In this paper, silver nanoparticles are produced via green synthesis method using green tea leaves. The introduced method is cost-effective and available, which provides condition to manipulate and control the average nanoparticle size. The produced particles were characterized using x-ray diffraction, scanning electron microscopic images, UV visualization, digital light scattering, zeta potential measurement and thermal conductivity measurement. Results demonstrated that the produced samples of silver nanoparticles are pure in structure (based on the x-ray diffraction test), almost identical in terms of morphology (spherical and to some extent cubic) and show longer stability when dispersed in deionized water. The UV-visualization showed a peak in 450 nm, which is in accordance with the previous studies reported in the literature. Results also showed that small particles have higher thermal and antimicrobial performance. As green tea leaves are used for extracting the silver nanoparticles, the method is eco-friendly. The thermal behaviour of silver nanoparticle was also analysed by dispersing the nanoparticles inside the deionized water. Results showed that thermal conductivity of the silver nano-fluid is higher than that of obtained for the deionized water. Activity of Ag nanoparticles against some bacteria was also examined to find the suitable antibacterial application for the produced particles.

Green Nanotechnology in Nordic Construction - Eco-innovation strategies and Dynamics in nordic Window Chains

DEFF Research Database (Denmark)

Andersen, Maj Munch; Sandén, Björn A.; Palmberg, Christopher

This project analyzes Nordic trends in the development and industrial uptake of green nanotechno-logy in construction. The project applies an evolutionary economic perspective in analyzing the innovation dynamics and firm strategies in the window value chains in three Nordic countries, Denmark......, Finland and Sweden. Hence the project investigates two pervasive parallel market trends: The emergence of the green market and the emergence of nanotechnology. The analysis investigates how a traditional economic sector such as the construction sector reacts to such major trends. Conclusions are multiple...... of nanotechnology in the construction sector in the Nordic countries we do find quite a high number of nanotech applications in the Nordic window chains. Eco-innovation is influencing strongly on the nanotech development. We see several examples of nano-enabled smart, multifunctional green solutions in the Nordic...

Una propuesta para el aprendizaje de ELE: tiempo libre e interculturalidad

Directory of Open Access Journals (Sweden)

Concepción Francos Maldonado

2012-08-01

Full Text Available En la propuesta que aquí describimos nos centramos en el tiempo de ocio comoelemento esencial de socialización y desarrollo personal, y pretendemos que elalumnado participe en las actividades de ocio de la ciudad, a través de las que, ademásde favorecer la igualdad de oportunidades, la autonomía y las potencialidadesindividuales, se aprende la lengua y se trabaja la interculturalidad conociendo formas deuso del tiempo libre en la sociedad en la que estamos, informándonos de aspectoslúdicos de diferentes culturas, y también de algunos aspectos curriculares.

Estrategia para la migración al software libre en el sector de la salud pública en la provincia de Camagüey

Directory of Open Access Journals (Sweden)

José Sánchez Méndez

Full Text Available En el escenario actual de Cuba y el mundo la migración al software libre constituye una necesidad para el desarrollo para garantizar la independencia tecnológica. Los procedimientos para realizar dicho proceso son fundamentales en la estrategia definida por el país que incluye la "Guía cubana de migración al software libre", sin embargo, su aplicación práctica enfrenta dificultades que han motivado a los autores a la elaboración de una estrategia específica para la migración al software libre en el sector de la Salud Pública de la provincia de Camagüey, Cuba. En esta estrategia se proponen las acciones concretas, los programas docentes que permitirán la recalificación del capital humano y las acciones que posibiliten garantizar la sostenibilidad de la migración al concluir el proceso.

Identification, characterization and functional analysis of regulatory region of nanos gene from half-smooth tongue sole (Cynoglossus semilaevis).

Science.gov (United States)

Huang, Jinqiang; Li, Yongjuan; Shao, Changwei; Wang, Na; Chen, Songlin

2017-06-20

The nanos gene encodes an RNA-binding zinc finger protein, which is required in the development and maintenance of germ cells. However, there is very limited information about nanos in flatfish, which impedes its application in fish breeding. In this study, we report the molecular cloning, characterization and functional analysis of the 3'-untranslated region of the nanos gene (Csnanos) from half-smooth tongue sole (Cynoglossus semilaevis), which is an economically important flatfish in China. The 1233-bp cDNA sequence, 1709-bp genomic sequence and flanking sequences (2.8-kb 5'- and 1.6-kb 3'-flanking regions) of Csnanos were cloned and characterized. Sequence analysis revealed that CsNanos shares low homology with Nanos in other species, but the zinc finger domain of CsNanos is highly similar. Phylogenetic analysis indicated that CsNanos belongs to the Nanos2 subfamily. Csnanos expression was widely detected in various tissues, but the expression level was higher in testis and ovary. During early development and sex differentiation, Csnanos expression exhibited a clear sexually dimorphic pattern, suggesting its different roles in the migration and differentiation of primordial germ cells (PGCs). Higher expression levels of Csnanos mRNA in normal females and males than in neomales indicated that the nanos gene may play key roles in maintaining the differentiation of gonad. Moreover, medaka PGCs were successfully labeled by the microinjection of synthesized mRNA consisting of green fluorescence protein and the 3'-untranslated region of Csnanos. These findings provide new insights into nanos gene expression and function, and lay the foundation for further study of PGC development and applications in tongue sole breeding. Copyright © 2017 Elsevier B.V. All rights reserved.

Biomedical applications of green synthesized Nobel metal nanoparticles.

Science.gov (United States)

Khan, Zia Ul Haq; Khan, Amjad; Chen, Yongmei; Shah, Noor S; Muhammad, Nawshad; Khan, Arif Ullah; Tahir, Kamran; Khan, Faheem Ullah; Murtaza, Behzad; Hassan, Sadaf Ul; Qaisrani, Saeed Ahmad; Wan, Pingyu

2017-08-01

Synthesis of Nobel metal nanoparticles, play a key role in the field of medicine. Plants contain a substantial number of organic constituents, like phenolic compounds and various types of glycosides that help in synthesis of metal nanoparticles. Synthesis of metal nanoparticles by green method is one of the best and environment friendly methods. The major significance of the green synthesis is lack of toxic by-products produced during metal nanoparticle synthesis. The nanoparticles, synthesized by green method show various significant biological activities. Most of the research articles report the synthesized nanoparticles to be active against gram positive and gram negative bacteria. Some of these bacteria include Escherichia coli, Bacillus subtilis, Klebsiella pneumonia and Pseudomonas fluorescens. The synthesized nanoparticles also show significant antifungal activity against Trichophyton simii, Trichophyton mentagrophytes and Trichophyton rubrum as well as different types of cancer cells such as breast cancer cell line. They also exhibit significant antioxidant activity. The activities of these Nobel metal nano-particles mainly depend on the size and shape. The particles of small size with large surface area show good activity in the field of medicine. The synthesized nanoparticles are also active against leishmanial diseases. This research article explores in detail the green synthesis of the nanoparticles and their uses thereof. Copyright © 2017 Elsevier B.V. All rights reserved.

EL SOFTWARE LIBRE Y SUS IMPLICACIONES JURÍDICAS

Directory of Open Access Journals (Sweden)

Gladys Stella Rodríguez

2008-01-01

(hardware, software, conocimientos, entre otros. Sólo que esta práctica se ha desnaturalizado creando riesgos de mantenerse el conocimiento y su acceso a un grupo selecto hegemónico. En consecuencia, hoy existe la posibilidad de que a través de licencias públicas generales se consagren derechos a los autores, en un marco de mayor flexibilidad (copyleft. La metodología es descriptiva - explicativa, con una revisión bibliográfica y hemerográficas sobre el tema. Asimismo, se consultó a Fundación para la Ciencia y la Tecnología (FUNDACITE ZULIA, a través de la Misión Ciencia. Se concluye que el software libre es una oportunidad para democratizar el acceso a la información en países en desarrollo, y es un reto para el desarrollador de softwares.

Diplomatura abierta en Software Libre : Propuesta de cursos de formación profesional en Tecnologías de la Información y Comunicación libres y de fuente abierta

OpenAIRE

Reingart, Mariano; Dominguez, Sebastian

2014-01-01

El presente documento es una iniciativa abierta y colaborativa para organizar cursos de capacitación semi-presencial, con programas de contenidos centrales de las TICs adaptados según los estándares para el nivel terciario / universitario de carreras en informática en Argentina. Se presentan herramientas junto con materiales libres orientados al autoaprendizaje, dirigido a aquellos que quieran adquirir, fortalecer y/o ampliar conocimientos en el área de software y tecnología. Se utiliza...

Green economy and green jobs; Vihreae talous ja vihreaet tyoet

Energy Technology Data Exchange (ETDEWEB)

Honkasalo, A.

2012-05-15

This report looks at discussions on a green economy and green jobs in international organizations such as the OECD, EU and UNEP. It also studies the structural change in the green economy in Finland and how this change will be brought forward by the year 2050 through low carbon technology and innovations. It draws special attention to how citizens' perception of risks and their development impact the approval and acceptance of climate policies and measures. Finland will continue to be a country that utilises natural resources, and where a large part of its industrial sector will be energy- and material-intensive forest, mining and basic metal industries. The following factors will have an impact on work: Energy production is mainly based on renewable energy sources such as bio-, wind and solar power. Energy and material efficiency are important targets; emissions will decrease also in work places. Repairs and wood-based building will increase; new houses will produce energy. Reuse will increase; former waste disposal sites will function as mines. Organic and GMO foodstuffs will become popular. Electric and hybrid cars will take over the markets. Environmental applications of gene- and nanotechnology will become widely used. Physical workplaces and strictly controlled working times will lose their importance; virtual offices and remote work become popular. Products will be produced to last, with renewable usage in mind, and repair and maintenance of products will become more common. Occupational health and safety issues are of paramount importance especially in bio-energy production, repair and maintenance work, as well as waste management. Especially nano- and biotechnology and hazardous chemicals require careful risk management; the precautionary principle is applied to them. Studies on a green economy and green jobs usually look very positively at the possibilities of creating new jobs through environmental policies. Employment estimates done in the past may

La Transición hacia el Trabajo Libre en Cuba, 1870 - 1886

OpenAIRE

Cowling, Camillia

2014-01-01

Traducción del inglés: Silvia Cogollos AmayaEste artículo examina el rol de las mujeres de color en la transición de Cuba al trabajo libre (1870-1886). Se encontró que una cantidad significativa de las peticiones de libertad y de mejoramiento de las condiciones de esclavitud fueron hechas por mujeres. Las mujeres tenían un papel específico que jugar dentro de la resistencia a la esclavitud. Esto se atribuye a varis factores; la responsabilidad de las mujeres en sus respectivas familias signif...

Scattering of electrons by alkali-halide molecules: LiBr and CsCl

International Nuclear Information System (INIS)

Vukovic, L.; Zuo, M.; Shen, G.F.; Stumpf, B.; Bederson, B.

1989-01-01

We have investigated small-angle electron scattering by highly polar molecules. Recoil experiments are performed at 5 and 20 eV for electrons scattered by LiBr and CsCl, within the shadow of the unscattered molecular beam. Low-angular-range scattering described by the Born approximation for rotating dipoles, combined with different theories for intermediate- and high-angle scattering, are compared with our results. Evaluated total scattering cross sections as well as momentum-transfer and viscosity cross sections are given. A general two-dimensional analysis of the recoil experiment is presented

Effects of brewing conditions on the antioxidant capacity of twenty-four commercial green tea varieties.

Science.gov (United States)

Sharpe, Erica; Hua, Fang; Schuckers, Stephanie; Andreescu, Silvana; Bradley, Ryan

2016-02-01

A novel paper-based Nanoceria Reducing Antioxidant Capacity (NanoCerac) assay for antioxidant detection (Sharpe, Frasco, Andreescu, & Andreescu, 2012), has been adapted for the first time as a high-throughput method, in order to measure the effect of brewing conditions and re-infusion on the antioxidant capacity of twenty-four commercial green teas. The oxygen radical absorbance capacity (ORAC) assay, frequently applied to complex foods and beverages, was used as a comparator measure of antioxidant capacity. A novel measure of sustained antioxidant capacity, the total inherent antioxidant capacity (TI-NanoCerac and TI-ORAC) was measured by infusing each tea six times. Effects of brewing conditions (temperature, brew time, etc.) were assessed using one popular tea as a standard. Both NanoCerac and ORAC assays correlated moderately (R(2) 0.80 ± 0.19). The average first-brew NanoCerac, TI-NanoCerac, first-brew ORAC and TI-ORAC were: 0.73 ± 0.1 GAE/g tea; 2.4 ± 0.70 mmolGAE/g tea; 1.0 ± 0.3 mmolTE/g tea and 2.1 ± 0.71 mmolTE/g tea respectively. Brewing conditions including water temperature and infusion time significantly affected antioxidant capacity. The high-throughput adaptation of the original NanoCerac assay tested here offered advantages over ORAC, including portability and rapid analysis. Copyright © 2015 Elsevier Ltd. All rights reserved.

Propuesta de conjunto de actividades físico-recreativas para la ocupación del tiempo libre de los habitantes del consejo popular rió feo del municipio de San Luis

Directory of Open Access Journals (Sweden)

Caridad Rivero González

2009-12-01

Full Text Available Nuestro trabajo se ha realizado a partir de los 12 a 15 años, podemos realizar las propuestas de un conjunto de actividades físicas ,recreativas para la ocupación del tiempo libre de la población ya que este constituye un desafió de nuestra época, puesto que tiende a transformar entre otros aspectos las condiciones sociales y culturales .El tiempo libre es una necesidad social para el individuo ya que en cierta medida del empleo racional y útil dependerá el papel que desempeña el hombre y pueda alcanzar en la sociedad, mediante el tiempo libre se realizan barias actividades deportivas y recreativas estas dependerán de sus intereses a la cultura del tiempo libre y necesidades en la sociedad. En el ámbito de las prácticas sociales, el tema del tiempo libre ha sido uno de los más discutidos y arbitrariamente definidos. Su importancia está dada, entre otros aspectos, por el reconocimiento que de él hacen los autores de las más diversas tendencias ideológicas. Podemos señalar que la comunidad cuenta con un amplio perímetro .que puede ser explotado con vistas a desarrollar un sinnúmero de actividades opcionales, como oferta recreativa, lo que permite aumentar perfectamente la satisfacción recreativa de los pobladores. Además cuenta con varias instalaciones, tanto deportivas como recreativas, que posibilitan un mayor aprovechamiento de las mismas a la hora de ofertar actividades recreativas. a nosotros a veces se nos hace casi imposible encontrar áreas que nos permita desarrollar actividades para que nuestra comunidad ocupe el tiempo libre , nosotros dentro de nuestro trabajo nos dimos a la tarea de planificar actividades culturales físicas deportivas y recreativas para un bienestar de nuestros adolescentes que puedan ocupar el tiempo libre dentro la comunidad socialista .

Nano-bio-sensing

CERN Document Server

Carrara, Sandro

2011-01-01

This book examines state-of-the-art applications of nano-bio-sensing. It brings together researchers from nano-electronics and bio-technology, providing multidisciplinary content from nano-structures fabrication to bio-sensing applications.

reglamentaria en el patrón técnico de lanzamiento de tiro libre

Directory of Open Access Journals (Sweden)

Bel\\u00E9n Garz\\u00F3n Echevarr\\u00ED

2014-01-01

Full Text Available El objetivo final de este trabajo es contribuir al proceso de adaptación de este deporte (baloncesto a los niños . A la edad de 12 a 13 , childrenwho han jugado anteriormente con reglas de mini-basket se encuentran de repente arrojados a la categoría juvenil , participando en basketballmatches en toda regla en las mismas condiciones , la misma cancha de tamaño , aro y pelota - como superior español profesional jugadores de la liga ACB . Usando criteriafor técnica tiros libres ( un tiro muy representativa como punto de partida , este artículo tiene como objetivo analizar el grado de adecuación de las regulaciones actuales son , en cuanto a cuestiones transitorias adaptationaland , mediante la realización de un análisis inferencial descriptivo y mediante la identificación de patrones temporales . El artículo concluye que los mini- basketballis una forma adecuada y adaptada de baloncesto, mientras que el cambio a la versión juvenil del juego rompe con los patrones técnicos byplayers interiorizadas que todavía son jóvenes, llevándolos a adoptar nuevos métodos, técnicamente incorrectos de ejecución libre tirar tiros.

Free/Libre Open Source Software Implementation in Schools: Evidence from the Field and Implications for the Future

Science.gov (United States)

Lin, Yu-Wei; Zini, Enrico

2008-01-01

This empirical paper shows how free/libre open source software (FLOSS) contributes to mutual and collaborative learning in an educational environment. Unlike proprietary software, FLOSS allows extensive customisation of software to support the needs of local users better. This also allows users to participate more proactively in the development…

Green nanotechnology in Nordic Construction: Eco-innovation strategies and Dynamics in Nordic Window Value Chains

DEFF Research Database (Denmark)

Andersen, Maj Munch

2010-01-01

This project analyzes Nordic trends in the development and industrial uptake of green nanotechno-logy in construction. The project applies an evolutionary economic perspective in analyzing the innovation dynamics and firm strategies in the window value chains in three Nordic countries, Denmark......, Finland and Sweden. Hence the project investigates two pervasive parallel market trends: The emergence of the green market and the emergence of nanotechnology. The analysis investigates how a traditional economic sector such as the construction sector reacts to such major trends. Conclusions are multiple...... of nanotechnology in the construction sector in the Nordic countries we do find quite a high number of nanotech applications in the Nordic window chains. Eco-innovation is influencing strongly on the nanotech development. We see several examples of nano-enabled smart, multifunctional green solutions in the Nordic...

Qualité, portée et incidence de l'édition savante en libre accès en ...

International Development Research Centre (IDRC) Digital Library (Canada)

Par contre, les opposants au libre accès s'inquiètent de la perception négative ... (PKP), la Scientific Electronic Library Online (SciELO) et le Red de Revistas ... Call for proposals: Innovations for the economic inclusion of marginalized youth.

Aspectos psicosociales de la enfermedad celíaca en España: una vida libre de gluten

Directory of Open Access Journals (Sweden)

Julián Rodríguez ALMAGRO

Full Text Available RESUMEN Objetivo: La celiaquía como enfermedad crónica tiene una alta prevalencia en nuestra sociedad. El artículo analiza los aspectos psicosociales de la enfermedad celíaca en los diferentes entornos, valorando el impacto de la implantación de una dieta estricta libre de gluten. Métodos: Estudio cualitativo entre los meses de Enero del 2013 a Abril del 2013 en el cual, a través de la teoría fundamentada y el análisis de contenido, se ha profundizado en el análisis de las entrevistas semiestructuradas a personas con enfermedad celíaca en España. Se realizaron llamamientos a traves de las redes sociales y grupos de celíacos hasta llegar a la saturación teórica, que determinó el tamaño final de la muestra de 24 personas. Resultados: Educación Sanitaria, Aislamiento social, soledad y desconocimiento social emergieron como categorías centrales en la experiencia de adopción de la dieta libre de gluten a partir del diagnóstico de celiaquía. Conclusión: Los profesionales deben promover y apoyar estrategias de apoyo social basadas en una comprensión íntegra de las experiencias de desarraigo y marginación que los pacientes celíacos experimentan en sus relaciones sociales a través de la comida. Se requiere un aumento de la educación sanitaria para entender e integrar el impacto psicosocial del diagnóstico de celiaquía y la dieta libre de gluten.

Electrical and optical characterization of green synthesized Gd{sub 2}S{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Paul, Somnath, E-mail: somnathpaul459@gmail.com; Sarkar, A. [Dept of Physics, Bijoy Krishna Girls’ College, 5/3, M. G. Road, Howrah-711101 (India)

2016-05-06

Gadolinium sulphide (Gd{sub 2}S{sub 3}) is a magnetic semiconductor with large band gap. Gd{sub 2}S{sub 3} was synthesized following chemical and green techniques. Later process provides good stability of the nano clusters (NC) due to in-situ capping of Gd{sub 2}S{sub 3} NC. It has been found that the optical band gap in Gd{sub 2}S{sub 3} developed by green synthesis is lowered considerably over that in chemically synthesized Gd{sub 2}S{sub 3}. The green agencies used in this work are Jatropha Latex and dilute Garlic extract; both are enriched in sulphur and other organic polymer molecules. Simple observation shows that Gd{sub 2}S{sub 3} NC retains residual magnetization. In this work optical and electrical characterization of the developed Gd{sub 2}S{sub 3} specimens are carried out. The overall results obtained are good.

Green Transformational Leadership and Green Performance: The Mediation Effects of Green Mindfulness and Green Self-Efficacy

Directory of Open Access Journals (Sweden)

Yu-Shan Chen

2014-09-01

Full Text Available No prior literature explores the influence of green transformational leadership on green performance, thus, this study develops a novel research framework to fill the research gap. This study investigates the influence of green transformational leadership on green performance and discusses the mediation effects of green mindfulness and green self-efficacy by means of structural equation modeling (SEM. The results indicate that green transformational leadership positively influences green mindfulness, green self-efficacy, and green performance. Moreover, this study demonstrates that the positive relationship between green transformational leadership and green performance is partially mediated by the two mediators: green mindfulness and green self-efficacy. It means that green transformational leadership can not only directly affect green performance positively but also indirectly affect it positively through green mindfulness and green self-efficacy. Therefore, firms need to raise their green transformational leadership, green mindfulness, and green self-efficacy to increase their green performance.

A Survey of Usability Practices in Free/Libre/Open Source Software

Science.gov (United States)

Paul, Celeste Lyn

A review of case studies about usability in eight Free/Libre/Open Source Software (FLOSS) projects showed that an important issue regarding a usability initiative in the project was the lack of user research. User research is a key component in the user-centered design (UCD) process and a necessary step for creating usable products. Reasons why FLOSS projects suffered from a lack of user research included poor or unclear project leadership, cultural differences between developer and designers, and a lack of usability engineers. By identifying these critical issues, the FLOSS usability community can begin addressing problems in the efficacy of usability activities and work towards creating more usable FLOSS products.

Presentación Dossier Tema Libre

Directory of Open Access Journals (Sweden)

Diana González Rey

2015-12-01

Full Text Available Con el décimo número de la Revista Historia 2.0: Conocimiento Histórico en Clave Digital, los editores saludamos a los lectores. Durante estos cinco años la publicación ha pasado por diversas etapas de aprendizaje en las que destacamos el apoyo de los autores, estudiantes y de los profesionales de la historia que contribuyen a divulgar y sostener la edición. Hemos querido celebrar nuestros cinco años con un dossier de Tema Libre, tal como fue él de nuestra primera entrega, en ésta nueva edición número diez (10. Los artículos aquí publicados fueron al igual que en todas las ediciones convocados públicamente, en la página de Facebook de AHISAB, a través la distribución mediante listas de correos, de servidores gratuitos como H- México, quiénes nos han colaborado en el proceso de distribución de las convocatorias. Igualmente la evaluación por pares fue de manera anónima de acuerdo a todos los estándares internacionales, una labor que debemos agradecer notoriamente púes constituye la base fundamental y académica de nuestra publicación.

Medicamentos de venta libre en el Brasil

Directory of Open Access Journals (Sweden)

Isabela Heineck

1998-06-01

Full Text Available En el presente estudio se analizaron los 100 productos del mercado farmacéutico popular (de venta libre más vendidos en el Brasil, en el período comprendido entre junio de 1992 y junio de 1993. Se excluyeron 23 productos alimentarios clasificados como medicamentos. La muestra, formada por 77 medicamentos, representaba aproximadamente 67% del consumo en valores y 76,8% del consumo en unidades de las especialidades vendidas en el mercado popular. Para la clasificación de los medicamentos, se utilizó el sistema anatómico-terapéutico-químico (ATC. Las especialidades también se clasificaron con la metodología del valor intrínseco, que considera la eficacia y los riesgos de las mismas. La mayoría de las especialidades (91% mostraron "poco valor intrínseco" (dudoso/nulo, relativo, inaceptable, y 70% correspondieron a combinaciones en dosis fijas. Solo 10 especialidades pertenecían a la Relación Nacional de Medicamentos, producida por el Ministerio de Salud, y cuatro a la lista de medicamentos esenciales de la OMS. Los grupos terapéuticos a los que pertenecían las especialidades fueron, en orden de mayor a menor frecuencia, el aparato digestivo, la piel, el aparato genitourinario, el aparato musculosquelético, el sistema nervioso central, los antiparasitarios, el aparato respiratorio y los órganos de los sentidos. El subgrupo terapéutico de mayor venta fue el de preparaciones para la garganta, mientras que el que representó el mayor valor en ventas fue el de los analgésicos no opiáceos y antipiréticos. Los resultados confirman la hipótesis planteada de que los medicamentos de venta libre en el Brasil presentan mala calidad terapéutica y de que el consumo de muchas de estas especialidades farmacéuticas representa gastos innecesarios para la población. Se puede afirmar también que algunos de esos medicamentos no deberían estar disponibles para una población que no está al corriente de las complicaciones asociadas con su

Resonant Spin-Transfer-Torque Nano-Oscillators

Science.gov (United States)

Sharma, Abhishek; Tulapurkar, Ashwin A.; Muralidharan, Bhaskaran

2017-12-01

Spin-transfer-torque nano-oscillators are potential candidates for replacing the traditional inductor-based voltage-controlled oscillators in modern communication devices. Typical oscillator designs are based on trilayer magnetic tunnel junctions, which have the disadvantages of low power outputs and poor conversion efficiencies. We theoretically propose using resonant spin filtering in pentalayer magnetic tunnel junctions as a possible route to alleviate these issues and present viable device designs geared toward a high microwave output power and an efficient conversion of the dc input power. We attribute these robust qualities to the resulting nontrivial spin-current profiles and the ultrahigh tunnel magnetoresistance, both of which arise from resonant spin filtering. The device designs are based on the nonequilibrium Green's-function spin-transport formalism self-consistently coupled with the stochastic Landau-Lifshitz-Gilbert-Slonczewski equation and Poisson's equation. We demonstrate that the proposed structures facilitate oscillator designs featuring a large enhancement in microwave power of around 1150% and an efficiency enhancement of over 1100% compared to typical trilayer designs. We rationalize the optimum operating regions via an analysis of the dynamic and static device resistances. We also demonstrate the robustness of our structures against device design fluctuations and elastic dephasing. This work sets the stage for pentalyer spin-transfer-torque nano-oscillator device designs that ameliorate major issues associated with typical trilayer designs.

Green Synthesis of Organics and Nanomaterials and Sustainable Applications of Nano-Catalysts- HESTEC

Science.gov (United States)

The presentation summarizes our green chemical synthesis activity involving benign alternatives, such as the use of supported reagents, and greener reaction medium in aqueous or solvent-free conditions.1 The synthesis of heterocyclic compounds, coupling reactions, and a variety o...

Metamaterial-based theoretical description of light scattering by metallic nano-hole array structures

Energy Technology Data Exchange (ETDEWEB)

Singh, Mahi R. [Department of Physics and Astronomy, University of Western Ontario, London N6A 3K7 (Canada); Najiminaini, Mohamadreza; Carson, Jeffrey J. L. [Lawson Health Research Institute, St. Joseph' s Health Care, 268 Grosvenor Street, London N6A 4V2 (Canada); Department of Medical Biophysics, University of Western Ontario, London N6A 3K7 (Canada); Balakrishnan, Shankar [Department of Physics and Astronomy, University of Western Ontario, London N6A 3K7 (Canada); Lawson Health Research Institute, St. Joseph' s Health Care, 268 Grosvenor Street, London N6A 4V2 (Canada); Department of Medical Biophysics, University of Western Ontario, London N6A 3K7 (Canada)

2015-05-14

We have experimentally and theoretically investigated the light-matter interaction in metallic nano-hole array structures. The scattering cross section spectrum was measured for three samples each having a unique nano-hole array radius and periodicity. Each measured spectrum had several peaks due to surface plasmon polaritons. The dispersion relation and the effective dielectric constant of the structure were calculated using transmission line theory and Bloch's theorem. Using the effective dielectric constant and the transfer matrix method, the surface plasmon polariton energies were calculated and found to be quantized. Using these quantized energies, a Hamiltonian for the surface plasmon polaritons was written in the second quantized form. Working with the Hamiltonian, a theory of scattering cross section was developed based on the quantum scattering theory and Green's function method. For both theory and experiment, the location of the surface plasmon polariton spectral peaks was dependant on the array periodicity and radii of the nano-holes. Good agreement was observed between the experimental and theoretical results. It is proposed that the newly developed theory can be used to facilitate optimization of nanosensors for medical and engineering applications.

Mass production of polymer nano-wires filled with metal nano-particles.

Science.gov (United States)

Lomadze, Nino; Kopyshev, Alexey; Bargheer, Matias; Wollgarten, Markus; Santer, Svetlana

2017-08-17

Despite the ongoing progress in nanotechnology and its applications, the development of strategies for connecting nano-scale systems to micro- or macroscale elements is hampered by the lack of structural components that have both, nano- and macroscale dimensions. The production of nano-scale wires with macroscale length is one of the most interesting challenges here. There are a lot of strategies to fabricate long nanoscopic stripes made of metals, polymers or ceramics but none is suitable for mass production of ordered and dense arrangements of wires at large numbers. In this paper, we report on a technique for producing arrays of ordered, flexible and free-standing polymer nano-wires filled with different types of nano-particles. The process utilizes the strong response of photosensitive polymer brushes to irradiation with UV-interference patterns, resulting in a substantial mass redistribution of the polymer material along with local rupturing of polymer chains. The chains can wind up in wires of nano-scale thickness and a length of up to several centimeters. When dispersing nano-particles within the film, the final arrangement is similar to a core-shell geometry with mainly nano-particles found in the core region and the polymer forming a dielectric jacket.

Plasmonic graded nano-disks as nano-optical conveyor belt.

Science.gov (United States)

Kang, Zhiwen; Lu, Haifei; Chen, Jiajie; Chen, Kun; Xu, Fang; Ho, Ho-Pui

2014-08-11

We propose a plasmonic system consisting of nano-disks (NDs) with graded diameters for the realization of nano-optical conveyor belt. The system contains a couple of NDs with individual elements coded with different resonant wavelengths. By sequentially switching the wavelength and polarization of the excitation source, optically trapped target nano-particle can be transferred from one ND to another. The feasibility of such function is verified based on the three-dimensional finite-difference time-domain technique and the Maxwell stress tensor method. Our design may provide an alternative way to construct nano-optical conveyor belt with which target molecules can be delivered between trapping sites, thus enabling many on-chip optofluidic applications.

Comparing Acute Effects of a Nano-TiO2 Pigment on Cosmopolitan Freshwater Phototrophic Microbes Using High-Throughput Screening

Science.gov (United States)

Binh, Chu Thi Thanh; Peterson, Christopher G.; Tong, Tiezheng; Gray, Kimberly A.; Gaillard, Jean-François; Kelly, John J.

2015-01-01

Production of titanium-dioxide nanomaterials (nano-TiO2) is increasing, leading to potential risks associated with unintended release of these materials into aquatic ecosystems. We investigated the acute effects of nano-TiO2 on metabolic activity and viability of algae and cyanobacteria using high-throughput screening. The responses of three diatoms (Surirella angusta, Cocconeis placentula, Achnanthidium lanceolatum), one green alga (Scenedesmus quadricauda), and three cyanobacteria (Microcystis aeruginosa, Gloeocapsa sp., Synechococcus cedrorum) to short-term exposure (15 to 60 min) to a common nano-TiO2 pigment (PW6; average crystallite size 81.5 nm) with simulated solar illumination were assessed. Five concentrations of nano-TiO2 (0.5, 2.5, 5, 10, and 25 mg L-1) were tested and a fluorescent reporter (fluorescein diacetate) was used to assess metabolic activity. Algae were sensitive to nano-TiO2, with all showing decreased metabolic activity after 30-min exposure to the lowest tested concentration. Microscopic observation of algae revealed increased abundance of dead cells with nano-TiO2 exposure. Cyanobacteria were less sensitive to nano-TiO2 than algae, with Gloeocapsa showing no significant decrease in activity with nano-TiO2 exposure and Synechococcus showing an increase in activity. These results suggest that nanomaterial contamination has the potential to alter the distribution of phototrophic microbial taxa within freshwater ecosystems. The higher resistance of cyanobacteria could have significant implications as cyanobacteria represent a less nutritious food source for higher trophic levels and some cyanobacteria can produce toxins and contribute to harmful algal blooms. PMID:25923116

Modelo matemático y simulaciones numéricas para un problema de frontera libre ecológico

Directory of Open Access Journals (Sweden)

Deccy Y. Trejos Angel

2014-09-01

Full Text Available En este artículo se estudia una aproximación numérica del Problema de Frontera Libre (PFL de un sistema de ecuaciones diferenciales de tipo parabólico unidimensional, asociado con la evolución de la interface, que describe la partición regional de dos grupos de individuos de una misma especie que interactúan en un límite espacial para obtener sus propios hábitats y que es a priori totalmente desconocido. Considerando la dinámica local del sistema, el esquema implícito de diferencias finitas es utilizado, obteniendo así un sistema algebraico no lineal de ecuaciones en cada paso de tiempo. Finalmente, algunas simulaciones de la distribución de densidad poblacional y de la evolución de la frontera libre conforme al tiempo son exhibidas en diferentes escenarios, en base a un algoritmo propuesto e implementado en MATLAB, esto permite validar el modelo matemático PFL.

The Effect of Nano Loading and Ultrasonic Compounding of EVA/LDPE/Nano-magnesium Hydroxide on Mechanical Properties and Distribution of Nano Particles

Science.gov (United States)

Azman, I. A.; Salleh, R. M.; Alauddin, S. M.; Shueb, M. I.

2018-05-01

Blends of Ethylene Vinyl Acetate (EVA) and Low-Density Polyethylene (LDPE) are promising composite which have good mechanical properties to environmental stress cracking. However, they lack fire resistant properties, which limits it usage in wire and cable industry. In order to improve flame retardancy ability, a range of nano-magnesium hydroxide (nano-MH) loading which is from 0 phr to maximum of 20 phr with ultrasonic extrusion 0-100 kHz frequencies have been introduced. Ultrasonic extrusion was used to improve the distribution of nano-MH. It was found that, 10 phr of nano loading with 100 kHz ultrasonic assisted has greater tensile strength compared to the nanocomposite without ultrasonication. Further increase of nano MH loading, will decrease the tensile properties. Better elongation at break was observed at10 phr nano-MH with the frequency of 50 kHz. The sample of 20 phr of nanoMH assisted with 50 kHz ultrasonic exhibits good flexural properties while 10 phr of nano-MH without the ultrasonic assisted demonstrates good in izod impact properties. From the evaluation of mechanical properties studied, it was found that 10 phr of nano-MH has shown the best performance among all the samples tested for EVA/LDPE/nano-MH composites. Transmission Electron Microscopy (TEM) has been conducted on 10 phr sample with different frequencies in order to observe the distribution of nano-MH particles. The sample with 100 kHz frequency shows more uniform dispersion of nano-MH in EVA/LDPE composites. This investigation indicates that the ultrasonic technology can enhance the mechanical properties studied as well as the dispersion of nano particles in the composite.

DEMANDA Y PRÁCTICA DE ACTIVIDADES FÍSICODEPORTIVAS DE TIEMPO LIBRE ENTRE LA COMUNIDAD UNIVERSITARIA ALMERIENSE

Directory of Open Access Journals (Sweden)

M.E. García

2010-09-01

Full Text Available

RESUMEN

La población corresponde al total de individuos de la comunidad universitaria almeriense. El tamaño de la muestra ha sido de 2.088 sujetos, asumiéndose un error muestral del ± 2% para un nivel de confianza del 95.5%. El procedimiento ha sido un muestreo polietápico estratificado con afijación proporcional. Para el personal universitario, se procedió a una estratificación por grupos de edad y sexo y para el alumnado por Facultades y Escuelas, por estudios, cursos y sexo. Se pretende conocer la disponibilidad y ocupación del tiempo libre, actitudes y comportamientos ante la práctica de actividad físico-deportiva de tiempo libre, evolución de las participaciones en el Servicio de Deportes, comportamientos de los practicantes actuales en el Servicio de Deportes y en otras ofertas y la demanda de actividades. Resaltar en los resultados: la poca disponibilidad de tiempo libre en días laborales, con respecto a fines de semana o vacaciones; alto interés hacia la práctica físico-deportiva en general; bajo porcentaje de los que nunca han practicado; el motivo principal de los que han abandonado es la falta de tiempo; los practicantes desarrollan su actividad físico-deportiva de tiempo libre mayoritariamente fuera de la Universidad; la demanda para la oferta futura del Servicio de Deportes de la Universidad de Almería, destaca la oferta en fines de semana, seguida de actividades continuadas, en forma de cursos, en épocas vacacionales y para el Trofeo Rector.
PALABRAS CLAVE: actividades físico-deportivas de tiempo libre, Universidad, demanda.

ABSTRACT

Our population corresponds to the total of individuals of the university community from Almería. The subjects were 2.088, to

Cancer Nano medicine

International Nuclear Information System (INIS)

Li, H.; Pike, M.M.; Luo, X.; Liu, L.H.

2013-01-01

Bioengineered nano materials have inspired revolutionary imaging and drug delivery methods whose clinical application in cancer research has resulted in powerful medical devices for early diagnosis, treatment, and prevention of cancer. Recent advances in super imaging agents have resulted in improved resolution and sensitivity. For instance, fluorescent quantum dots with wavelength-tunable emissions, plasmon-resonant gold nano structures with shape-controlled near-infrared absorptions, and MRI-active iron oxide nanoparticles are well-established molecular imaging probes for noninvasive cancer imaging. Nano materials are also considered to be the most effective vectors that can break through transport bio barriers and deliver a constant dose of multiple therapeutic agents to tumors and intracellular endocytic compartments for cancer gene therapy, immunotherapy, or chemotherapy. Furthermore, nano wire- or nano tube-based electronic devices demonstrate extraordinary sensitivity capable of detection at the single molecule or protein level. It is anticipated that developing nano technology-driven imaging, sensing, and therapeutic systems will dramatically advance cancer research and clinical treatments.

Effect of capsid proteins to ICG mass ratio on fluorescent quantum yield of virus-resembling optical nano-materials

Science.gov (United States)

Gupta, Sharad; Ico, Gerardo; Matsumura, Paul; Rao, A. L. N.; Vullev, Valentine; Anvari, Bahman

2012-03-01

We recently reported construction of a new type of optical nano-construct composed of genome-depleted plant infecting brome mosaic virus (BMV) doped with Indocyanine green (ICG), an FDA-approved chromophore. We refer to these constructs as optical viral ghosts (OVGs) since only the capsid protein (CP) subunits of BMV remain to encapsulate ICG. To utilize OVGs as effective nano-probes in fluorescence imaging applications, their fluorescence quantum yield needs to be maximized. In this study, we investigate the effect of altering the CP to ICG mass ratio on the fluorescent quantum yield of OVGs. Results of this study provide the basis for construction of OVGs with optimal amounts of CP and ICG to yield maximal fluorescence quantum yield.

IMPACTO DEL PETRÓLEO CRUDO EN SUELO SOBRE LA MICROBIOTA DE VIDA LIBRE FIJADORA DE NITRÓGENO

Directory of Open Access Journals (Sweden)

Mayra Vázquez-Luna

2011-11-01

Full Text Available Los derrames de petróleo afectan las propiedades físicas del suelo y especialmente las poblaciones naturales de microorganismos. En particular causan disminución en bacterias fijadoras de nitrógeno de vida libre, encargadas de asimilar y reciclar nutrientes en los ciclos biogeoquímicos; al alterarse éstos, se afecta la fertilidad del suelo. El objetivo de esta investigación fue evaluar el impacto del petróleo crudo sobre bacterias fijadoras de nitrógeno de vida libre en un suelo bajo condiciones controladas. Se experimentó en suelo contaminado con cinco concentraciones de petróleo (1200, 3500, 10,000, 20,000 y 40,000 mg kg-1 en peso seco en un diseño completamente al azar. Se midieron las poblaciones bacterias fijadoras de nitrógeno de vida libre en cada concentración. El índice del impacto microbiano de las bacterias mostró que al final de la prueba (219 h, en cada una de las cinco concentraciones de petróleo hubo un incremento exponencial de colonias bacterianas altamente significativo (P ≤ 0.01, 2 a 3.5 veces más abundantes que en el testigo. Se infiere un fenómeno de recolonización y adaptación al medio. A nivel macroscópico, en los tratamientos con mayor concentración de petróleo hubo menor diversidad de colonias, pero las poblaciones fueron significativamente mayores. También, en los tratamientos de mayor concentración del hidrocarburo, se observaron colonias bacterianas no presentes en el tratamiento testigo. Las bacterias fijadoras de nitrógeno de vida libre podrían adaptarse a condiciones adversas. La selección de las más aptas sería útil en la biorremediación o saneamiento de zonas impactadas por petróleo crudo.

Fe catalysts for methane decomposition to produce hydrogen and carbon nano materials

KAUST Repository

Zhou, Lu; Enakonda, Linga Reddy; Harb, Moussab; Saih, Youssef; Aguilar Tapia, Antonio; Ould-Chikh, Samy; Hazemann, Jean-louis; Li, Jun; Wei, Nini; Gary, Daniel; Del-Gallo, Pascal; Basset, Jean-Marie

2017-01-01

Conducting catalytic methane decomposition over Fe catalysts is a green and economic route to produce H2 without CO/CO2 contamination. Fused 65wt% and impregnated 20wt% Fe catalysts were synthesized with different additives to investigate their activity, whereas showing Fe-Al2O3 combination as the best catalyst. Al2O3 is speculated to expose more Fe00 for the selective deposition of carbon nano tubes (CNTs). A fused Fe (65wt%)-Al2O3 sample was further investigated by means of H2-TPR, in-situ XRD, HRTEM and XAS to conclude 750°C is the optimized temperature for H2 pre-reduction and reaction to obtain a high activity. Based on density functional theory (DFT) study, a reaction mechanism over Fe catalysts was proposed to explain the formation of graphite from unstable supersaturated iron carbides decomposition. A carbon deposition model was further proposed which explains the formation of different carbon nano materials.

Fe catalysts for methane decomposition to produce hydrogen and carbon nano materials

KAUST Repository

Zhou, Lu

2017-02-21

Conducting catalytic methane decomposition over Fe catalysts is a green and economic route to produce H2 without CO/CO2 contamination. Fused 65wt% and impregnated 20wt% Fe catalysts were synthesized with different additives to investigate their activity, whereas showing Fe-Al2O3 combination as the best catalyst. Al2O3 is speculated to expose more Fe00 for the selective deposition of carbon nano tubes (CNTs). A fused Fe (65wt%)-Al2O3 sample was further investigated by means of H2-TPR, in-situ XRD, HRTEM and XAS to conclude 750°C is the optimized temperature for H2 pre-reduction and reaction to obtain a high activity. Based on density functional theory (DFT) study, a reaction mechanism over Fe catalysts was proposed to explain the formation of graphite from unstable supersaturated iron carbides decomposition. A carbon deposition model was further proposed which explains the formation of different carbon nano materials.

Are nano-composites and nano-ionomers suitable for orthodontic bracket bonding?

Science.gov (United States)

Uysal, Tancan; Yagci, Ahmet; Uysal, Banu; Akdogan, Gülsen

2010-02-01

The aim of this study was to test nano-composite (Filtek Supreme Plus Universal) and a newly introduced nano-ionomer (Ketac N100 Light Curing Nano-Ionomer) restorative to determine their shear bond strength (SBS) and failure site locations in comparison with a conventional light-cure orthodontic bonding adhesive (Transbond XT). Sixty freshly extracted human maxillary premolar teeth were arbitrarily divided into three equal groups. The brackets were bonded to the teeth in each group with different composites, according to the manufacturers' instructions. The SBS values of the brackets were recorded in Megapascals (MPa) using a universal testing machine. Adhesive remnant index scores were determined after failure of the brackets. The data were analysed using analysis of variance, Tukey honestly significant difference, and chi-square tests. The results demonstrated that group 1 (Transbond XT, mean: 12.60 +/- 4.48 MPa) had a higher SBS than that of group 2 (nano-composite, mean: 8.33 +/- 5.16 MPa; P nano-ionomer, mean: 6.14 +/- 2.12 MPa; P Nano-composites and nano-ionomers may be suitable for bonding since they fulfil the previously suggested SBS ranges for clinical acceptability, but they are inferior to a conventional orthodontic composite.

Preparation, Characterization, and Modeling of Carbon Nano fiber/Epoxy Nano composites

International Nuclear Information System (INIS)

Sun, L.H.; Yang, Z.G.; Ounaies, Z.; Whalen, C.A.; Gao, X.L.

2011-01-01

There is a lack of systematic investigations on both mechanical and electrical properties of carbon nano fiber (CNF)-reinforced epoxy matrix nano composites. In this paper, an in-depth study of both static and dynamic mechanical behaviors and electrical properties of CNF/epoxy nano composites with various contents of CNFs is provided. A modified Halpin-Tsai equation is used to evaluate the Young's modulus and storage modulus of the nano composites. The values of Young's modulus predicted using this method account for the effect of the CNF agglomeration and fit well with those obtained experimentally. The results show that the highest tensile strength is found in the epoxy nano composite with a 1.0 wt % CNFs. The alternate-current (AC) electrical properties of the CNF/epoxy nano composites exhibit a typical insulator-conductor transition. The conductivity increases by four orders of magnitude with the addition of 0.1 wt % (0.058 vol %) CNFs and by ten orders of magnitude for nano composites with CNF volume fractions higher than 1.0 wt % (0.578 vol %). The percolation threshold (i.e., the critical CNF volume fraction) is found to be at 0.057 vol %.

Non-equilibrium Green function method: theory and application in simulation of nanometer electronic devices

International Nuclear Information System (INIS)

Do, Van-Nam

2014-01-01

We review fundamental aspects of the non-equilibrium Green function method in the simulation of nanometer electronic devices. The method is implemented into our recently developed computer package OPEDEVS to investigate transport properties of electrons in nano-scale devices and low-dimensional materials. Concretely, we present the definition of the four real-time Green functions, the retarded, advanced, lesser and greater functions. Basic relations among these functions and their equations of motion are also presented in detail as the basis for the performance of analytical and numerical calculations. In particular, we review in detail two recursive algorithms, which are implemented in OPEDEVS to solve the Green functions defined in finite-size opened systems and in the surface layer of semi-infinite homogeneous ones. Operation of the package is then illustrated through the simulation of the transport characteristics of a typical semiconductor device structure, the resonant tunneling diodes. (review)

Bases de datos de acceso libre: Retos y oportunidades para la docencia universitaria

OpenAIRE

Pérez-delHoyo, Raquel; Andújar-Montoya, María Dolores; Sentana Gadea, Irene; García González, Encarnación; Ramón-Dangla, Remedios

2017-01-01

Considerar que el consumo inteligente de información ha de constituir una capacidad básica tanto de alumnos como de profesores en el ámbito universitario, conlleva la necesidad de introducir cambios en el proceso de enseñanza aprendizaje. El empleo de bases de datos de acceso libre en el aula como parte del proceso metodológico de aprendizaje supone, en este sentido, una acción de mejora sustancial en la línea del nuevo modelo educativo del EEES, facilitando el aprendizaje autónomo y para tod...

NanoAODs

CERN Document Server

Husova, Lucia Anna

2017-01-01

The scientist on LHC experiment analyse a huge amount of data every day on the Grid. Thus new methods are requested, how to make the analysis more efficient. The NanoAOD is a derived dataset from AOD, where only information necessary for the analysis is stored. Thus the analysis can be more than two times faster, because of the smaller file size, which can be read faster on the Grid. The main goal of this summer student project was to help other users to start using NanoAODs by rewriting their user tasks. Two example users tasks were converted to NanoAODs and tested with the local train test. A speed up of 3.5 was reached. The results of the analysis tasks are identical independent if they use AODs or NanoAODs.

Libre comercio en norteamerica. Algunas explicaciones e implicaciones para México

Directory of Open Access Journals (Sweden)

Carlos GONZÁLEZ MARTÍNEZ

2009-11-01

Full Text Available RESUMEN: El autor exmina las oportunidades y retos que puede encontrar México en el tratado de Libre Comercio, firmado entre México, Estados Unidos y Canadá. Considera esta integración económica como parte de un proceso más amplio de reforma del Estado y replanteamiento de los vínculos económicos con el exterior.ABSTRACT: The author analizes the opportunities and challenges that the Free Trade Agreement signed by México, The United States and Canada represents for Mexico. This economic integration is considered as a part of a greater process of reform of the State, and of reconsideration of the external economic links of Mexico with abroad.

Green synthetic strategy of BCNO nanostructure and phosphor-based light – Emitting diodes

Energy Technology Data Exchange (ETDEWEB)

Kang, Yue [The Quartermaster Research Institute of General Logistics Department, Beijing 100010 (China); Yuan, Bo [Chemical Defense Institute of China, Beijing 100010 (China); Zhang, Dongjiu [Key Laboratory of Space Launching Site Reliability Technology, Hainan 570100 (China); Ma, Tian; Huang, Xiancong [The Quartermaster Research Institute of General Logistics Department, Beijing 100010 (China); Chu, Zengyong [College of Science, National University of Defense Technology, Changsha 410073 (China); Lai, Kan [The Quartermaster Research Institute of General Logistics Department, Beijing 100010 (China)

2016-11-15

BCNO phosphor has been paid much attention due to their unique physical, electronic and optical properties. Here we have successfully obtained BCNO nano-particle phosphor by microwave treating from boric acid, urea, and glucose at low temperatures and in short reaction time. Glucose decomposed into graphene quantum dots (GQDs), which facilitated the formation of hexagonal boron nitride (h-BN). Through our method, GQDs domains were uniformly incorporated into h-BN, leading to the formation of BCNO and decrease of bandgap. BCNO demonstrated excellent performance in light emitting diodes (LEDs) with green and blue light. We envision that this BCNO phosphor will enable the next generation blue and green LED devices due to the easiness of large scale fabrication at an economic cost.

Green synthetic strategy of BCNO nanostructure and phosphor-based light – Emitting diodes

International Nuclear Information System (INIS)

Kang, Yue; Yuan, Bo; Zhang, Dongjiu; Ma, Tian; Huang, Xiancong; Chu, Zengyong; Lai, Kan

2016-01-01

BCNO phosphor has been paid much attention due to their unique physical, electronic and optical properties. Here we have successfully obtained BCNO nano-particle phosphor by microwave treating from boric acid, urea, and glucose at low temperatures and in short reaction time. Glucose decomposed into graphene quantum dots (GQDs), which facilitated the formation of hexagonal boron nitride (h-BN). Through our method, GQDs domains were uniformly incorporated into h-BN, leading to the formation of BCNO and decrease of bandgap. BCNO demonstrated excellent performance in light emitting diodes (LEDs) with green and blue light. We envision that this BCNO phosphor will enable the next generation blue and green LED devices due to the easiness of large scale fabrication at an economic cost.

Construction of vesicle CdSe nano-semiconductors photocatalysts with improved photocatalytic activity: Enhanced photo induced carriers separation efficiency and mechanism insight.

Science.gov (United States)

Wen, Jiangsu; Ma, Changchang; Huo, Pengwei; Liu, Xinlin; Wei, Maobin; Liu, Yang; Yao, Xin; Ma, Zhongfei; Yan, Yongsheng

2017-10-01

Visible-light-driven photocatalysis as a green technology has attracted a lot of attention due to its potential applications in environmental remediation. Vesicle CdSe nano-semiconductor photocatalyst are successfully prepared by a gas template method and characterized by a variety of methods. The vesicle CdSe nano-semiconductors display enhanced photocatalytic performance for the degradation of tetracycline hydrochloride, the photodegradation rate of 78.824% was achieved by vesicle CdSe, which exhibited an increase of 31.779% compared to granular CdSe. Such an exceptional photocatalytic capability can be attributed to the unique structure of the vesicle CdSe nano-semiconductor with enhanced light absorption ability and excellent carrier transport capability. Meanwhile, the large surface area of the vesicle CdSe nano-semiconductor can increase the contact probability between catalyst and target and provide more surface-active centers. The photocatalytic mechanisms are analyzed by active species quenching. It indicates that h + and O 2 - are the main active species which play a major role in catalyzing environmental toxic pollutants. Simultaneously, the vesicle CdSe nano-semiconductor had high efficiency and stability. Copyright © 2017. Published by Elsevier B.V.

Évaluation de l'incidence du libre accès au droit sur la compétence ...

International Development Research Centre (IDRC) Digital Library (Canada)

Le domaine de programme Technologies de l'information et de la communication au service du développement (TIC-D) du CRDI a soutenu des centres ... Bien que plusieurs projets de libre diffusion du droit aient vu le jour de par le monde, jusqu'à maintenant, aucune recherche n'a visé à mieux comprendre les incidences ...

Electrochemically synthesized Si nano wire arrays and thermoelectric nano structures

International Nuclear Information System (INIS)

Khuan, N.I.; Ying, K.K.; Nur Ubaidah Saidin; Foo, C.T.

2012-01-01

Thermoelectric nano structures hold great promise for capturing and directly converting into electricity some vast amount of low-grade waste heats now being lost to the environment (for example from nuclear power plant, fossil fuel burning, automotive and household appliances). In this study, large-area vertically-aligned silicon nano wire (SiNW) arrays were synthesized in an aqueous solution containing AgNO 3 and HF on p-type Si (100) substrate by self-selective electroless etching process. The etching conditions were systematically varied in order to achieve different stages of nano wire formation. Diameters of the SiNWs obtained varied from approximately 50 to 200 nm and their lengths ranged from several to a few tens of μm. Te/ Bi 2 Te 3 -Si thermoelectric core-shell nano structures were subsequently obtained via galvanic displacement of SiNWs in acidic HF electrolytes containing HTeO 2 + and Bi 3+ / HTeO 2 + ions. The reactions were basically a nano-electrochemical process due to the difference in redox potentials between the materials. the surface-modified SiNWs of core-shell structures had roughened surface morphologies and therefore, higher surface-t-bulk ratios compared to unmodified SiNWs. They have potential applications in sensors, photovoltaic and thermoelectric nano devices. Growth study on the SiNWs and core-shell nano structures produced is presented using various microscopy, diffraction and probe-based techniques for microstructural, morphological and chemical characterizations. (Author)

Effect of increasing length on the electronic transport of an armchair graphene nano-ribbons

Directory of Open Access Journals (Sweden)

Sh Aghamiri Esfahani

2015-12-01

Full Text Available In this research, we have investigated the effect of increasing length on the electronic transport of an armchair graphene nano-ribbons with nitrogen atom impurity and without impurity. The semi-infinite, one-dimensional molecular systems are connected to two electrodes and the electron-electron interaction is ignored. The system is described by a simple tight binding model. All calculations are based on the Green's function and Landauer–Buttiker approach, and the electrodes are described in a wide band approximation.

Combinatorial Nano-Bio Interfaces.

Science.gov (United States)

Cai, Pingqiang; Zhang, Xiaoqian; Wang, Ming; Wu, Yun-Long; Chen, Xiaodong

2018-06-08

Nano-bio interfaces are emerging from the convergence of engineered nanomaterials and biological entities. Despite rapid growth, clinical translation of biomedical nanomaterials is heavily compromised by the lack of comprehensive understanding of biophysicochemical interactions at nano-bio interfaces. In the past decade, a few investigations have adopted a combinatorial approach toward decoding nano-bio interfaces. Combinatorial nano-bio interfaces comprise the design of nanocombinatorial libraries and high-throughput bioevaluation. In this Perspective, we address challenges in combinatorial nano-bio interfaces and call for multiparametric nanocombinatorics (composition, morphology, mechanics, surface chemistry), multiscale bioevaluation (biomolecules, organelles, cells, tissues/organs), and the recruitment of computational modeling and artificial intelligence. Leveraging combinatorial nano-bio interfaces will shed light on precision nanomedicine and its potential applications.

Green Transformational Leadership and Green Performance: The Mediation Effects of Green Mindfulness and Green Self-Efficacy

OpenAIRE

Yu-Shan Chen; Ching-Hsun Chang; Yu-Hsien Lin

2014-01-01

No prior literature explores the influence of green transformational leadership on green performance, thus, this study develops a novel research framework to fill the research gap. This study investigates the influence of green transformational leadership on green performance and discusses the mediation effects of green mindfulness and green self-efficacy by means of structural equation modeling (SEM). The results indicate that green transformational leadership positively influences green min...

Nano-scale Materials and Nano-technology Processes in Environmental Protection

International Nuclear Information System (INIS)

Vissokov, Gh; Tzvetkoff, T.

2003-01-01

A number of environmental and energy technologies have benefited substantially from nano-scale technology: reduced waste and improved energy efficiency; environmentally friendly composite structures; waste remediation; energy conversion. In this report examples of current achievements and paradigm shifts are presented: from discovery to application; a nano structured materials; nanoparticles in the environment (plasma chemical preparation); nano-porous polymers and their applications in water purification; photo catalytic fluid purification; hierarchical self-assembled nano-structures for adsorption of heavy metals, etc. Several themes should be considered priorities in developing nano-scale processes related to environmental management: 1. To develop understanding and control of relevant processes, including protein precipitation and crystallisation, desorption of pollutants, stability of colloidal dispersion, micelle aggregation, microbe mobility, formation and mobility of nanoparticles, and tissue-nanoparticle interaction. Emphasis should be given to processes at phase boundaries (solid-liquid, solid-gas, liquid-gas) that involve mineral and organic soil components, aerosols, biomolecules (cells, microbes), bio tissues, derived components such as bio films and membranes, and anthropogenic additions (e.g. trace and heavy metals); 2. To carry out interdisciplinary research that initiates Noel approaches and adopts new methods for characterising surfaces and modelling complex systems to problems at interfaces and other nano-structures in the natural environment, including those involving biological or living systems. New technological advances such as optical traps, laser tweezers, and synchrotrons are extending examination of molecular and nano-scale processes to the single-molecule or single-cell level; 3. To integrate understanding of the roles of molecular and nano-scale phenomena and behaviour at the meso- and/or macro-scale over a period of time

[Fe₃O₄-β-Cyclodextrin Polymer Nano Composites Solid-Phase Extraction-UV-Vis Spectrophotometry for Separation Analysis Malachite Green].

Science.gov (United States)

Feng, Gang; Ping, Wen-hui; Zhu, Xia-shi

2016-02-01

In this paper, carboxymethyl-hydroxypropyl-β-cyclodextrin polymer modified magnetic particles Fe₃O₄ (CM-HP-β-CD- CP-MNPs) were prepared and applied to magnetic solid phase extraction of malachite green combined with UV-Visible spectrom- etry detection. The synthesized magnetic particles were characterized by element analysis, Fourier transform infrared spectra and transmission electron microscopy. Several variables affecting the extraction and desorption of malachite green such as pH, the amount of adsorbent, the type and volume of eluent, extraction and desorption time, and temperature were investigated. Under the optimum conditions, malachite green could be adsorbed by CM-HP-β-CDCP-MNPs (RE% = 92), and elution by C₂H₅OH (EE% = 90). the preconcentration factor of the proposed method was approximately 7.5, the CM-HP-β-CDCP-MNPs could be used repeatedly for 5 times and offered better recovery. The linear range and detection limit (DL) were found to be 0.08~8.00 µg · mL⁻¹ and 5.6 ng · mL⁻¹ respectively. This technique had been successfully applied to the determination of malachite green in real samples. The inclusion interaction of CM-HP--CDCP-MNPs with malachite green was studied through FTIR.

ON NANO Λg-CLOSED SETS

OpenAIRE

Rajasekaran, Ilangovan; Nethaji, Ochanan

2017-01-01

Abstaract−In this paper, we introduce nano ∧g-closed sets in nano topological spaces. Some properties of nano ∧g-closed sets and nano ∧g-open sets are weaker forms of nano closed sets and nano open sets

Transferring metallic nano-island on hydrogen passivated silicon surface for nano-electronics

International Nuclear Information System (INIS)

Deng, J; Troadec, C; Joachim, C

2009-01-01

In a planar configuration, precise positioning of ultra-flat metallic nano-islands on semiconductor surface opens a way to construct nanostructures for atomic scale interconnects. Regular triangular Au nano-islands have been grown on atomically flat MoS 2 substrates and manipulated by STM to form nanometer gap metal-pads connector for single molecule electronics study. The direct assembly of regular shaped metal nano-islands on H-Si(100) is not achievable. Here we present how to transfer Au triangle nano-islands from MoS 2 onto H-Si(100) in a clean manner. In this experiment, clean MoS 2 substrates are patterned as array of MoS 2 pillars with height of 8 μm. The Au triangle nano-islands are grown on top of the pillars. Successful printing transfer of these Au nano-islands from the MoS 2 pillars to the H-Si(100) is demonstrated.

GREEN PACKAGING, GREEN PRODUCT, GREEN ADVERTISING, PERSEPSI, DAN MINAT BELI KONSUMEN

Directory of Open Access Journals (Sweden)

Imam Santoso

2016-12-01

Full Text Available Environmental problems become one of the strategic issues in achieving global competitiveness. One of the issues is products that are made from environmental friendly materials or known as green product. Furthermore, in green products marketing, the company also uses green packaging and green advertising concept. This study aimed to analyze the effect of green packaging, green products, and green advertising on consumer perception and purchasing intention. The study was conducted in Ketawanggede Village, Lowokwaru Sub-district, Malang City. The sampling method used nonprobability accidential sampling techniques. The numbers of respondents were 113 consumers in study site. Data were collected by interview using questionnaires. The method of analysis used Generalized Structured Component Analysis (GSCA. The analysis showed that the green packaging, green products, and green advertising had positive significant influence on consumer perceptions. Meanwhile, green product and consumer perception had positive significant influence on purchasing interest, but the green packaging and green advertising has not found sufficient evidence in influencing purchasing intention.

USO DEL TIEMPO LIBRE EN EL CANTON DE TURRIALBA Y SU INFLUENCIA EN LA CALIDAD DE VIDA SEGÚN EDAD Y GÉNERO

Directory of Open Access Journals (Sweden)

Olman Vargas Zumbado

2006-12-01

Full Text Available Se pretende determinar cómo utilizaban el tiempo libre en el Cantón Central de Turrialba; cuál fue su influencia en la calidad de vida según edad y género; identificar las actividades que se realizan según edad y género y si éstas contribuyen a la calidad de vida, en las relaciones familiares y en el aspecto físico, social y psicológico, finalmente, si la población joven es más activa que el adulto o el adulto mayor. Se determinó que los (as participantes cuentan con tiempo libre para recrearse y que los hombres cuentan con más tiempo libre que las mujeres. Ambos géneros opinan que es importante la recreación para el bienestar físico, social y psicológico y que les ayuda a mejorar su calidad de vida. La tendencia independientemente del género fue a escoger actividades recreativas pasivas (ver televisión, escuchar música y dormir, en casi todos los grupos de edades, solamente los hombres entre los 30 a 39 años escogieron caminar como actividad preferida, luego ver televisión y dormir.

Editorial Emerging Multifunctional Nano structures

International Nuclear Information System (INIS)

Fan, H.; Lu, Y.; Ramanath, G.; Pomposo, J.A.

2009-01-01

The interest in emerging nano structures is growing exponentially since they are promising building blocks for advanced multifunctional nano composites. In recent years, an evolution from the controlled synthesis of individual monodisperse nanoparticles to the tailored preparation of hybrid spherical and also unsymmetrical multiparticle nano structures is clearly observed. As a matter of fact, the field of nano structures built around a nano species such as inside, outside, and next to a nanoparticle is becoming a new evolving area of research and development with potential applications in improved drug delivery systems, innovative magnetic devices, biosensors, and highly efficient catalysts, among several others Emerging nano structures with improved magnetic, conducting and smart characteristics are currently based on the design, synthesis, characterization and modeling of multifunctional nano object-based materials. In fact, core-shell nanoparticles and other related complex nano architectures covering a broad spectrum of materials (from metal and metal oxide to fused carbon, synthetic polymer, and bio polymer structures) to nano structure morphologies (spherical, cylindrical, star-like, etc.) are becoming the main building blocks for next generation of drug delivery systems, advanced sensors and biosensors, or improved nano composites. The five papers presented in this special issue examine the preparation and characterization of emerging multifunctional materials, covering from hybrid asymmetric structures to engineering nano composites.

Synthesis and characterization of nano hydroxyapatite using reverse micro emulsions as nano reactors

International Nuclear Information System (INIS)

Amin, S.; Siddique, T.

2015-01-01

In the present work reverse micro emulsion has been employed as nano reactors to synthesize nano crystalline Hydroxyapatite (HA). Two precursors; calcium and phosphate with different counter ions of each were used for the synthesis of HA at two different temperatures. To maintain the emulsified nano reactor, cyclohexane, TX-100 and 1-butanol including phosphate precursor was the continuous phase while aqueous Ca precursor solution was taken as the dispersed phase. Nano crystalline particles thus produced were evaluated on the basis of synthesis route, counter ions and temperature. It has been shown that emulsified nano reactors control the morphology, particle size and minimize phase transformation of HA. Characterizations of nano powder of HA are carried out using x-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), and scanning electron microscopy (SEM). HA crystallite size was found to be in the range of 20-25 nm whereas the morphology of nano particles changed from spheres to rods. (author)

Implantación de un sistema VoIP basado en software libre con Asterisk

OpenAIRE

Ramírez Tunjuelo, Rubier

2013-01-01

Este proyecto busca analizar, diseñar e implementar una nueva solución de telefonía para el Centro Social de Oficiales de la Policía Nacional contemplando la posibilidad de optar por una migración hacia un sistema VoIP bajo software libre con Asterisk. En consecuencia, se deben evaluar las tecnologías actuales buscando proveer nuevas funcionalidades en el servicio telefónico generando bajos costos en su implementación, funcionamiento y mantenimiento. Aquest projecte busca analitzar, dissen...

Nano devices and sensors

CERN Document Server

Liaw, Shien-Kuei; Chung, Yung-Hui

2016-01-01

This volume on semiconductor devices focuses on such topics as nano-imprinting, lithography, nanowire charge-trapping, thermo-stability in nanowires, nano-electrodes, and voltage and materials used for fabricating and improving electrical characteristics of nano-materials.

Application of emission CT on nano-robot radiation imaging tracing and isotope sign in nano-robot

International Nuclear Information System (INIS)

Wang Xuewu; Cheng Jianping; Kang Kejun

2000-01-01

Nano-technology has been a scientific and technical frontier with major trends foreseen in several disciplines. Nano-robot is the most remarkable imagination of the application of nano-technology. And it should be concerned of tracing technology along with nano-robot. The character of nano-robot is deeply analyzed, the development status of emission CT is integrated, and the application of emission CT on nano-robot radiation imaging tracing is discussed. The isotope sign of nano-robot is especially calculated and analyzed

Fabrication of high-aspect-ratio nano structures using a nano x-ray shadow mask

International Nuclear Information System (INIS)

Kim, Yong Chul; Lee, Seung S

2008-01-01

This paper describes a novel method for the fabrication of high-aspect-ratio nano structures (HAR-nano structures) using a nano x-ray shadow mask and deep x-ray lithography (DXRL). The nano x-ray shadow mask is fabricated by depositing an x-ray absorber layer (Au, 3 µm) onto the back side of a nano shadow mask. The nano shadow mask is produced with nano-sized apertures whose dimensions are reduced to several tens of nanometers by the accumulation of low-stress silicon nitride (Si x N y ) using the LPCVD process on the shadow mask. A shadow mask containing apertures with a size of 1 µm is fabricated on a bulk micromachined Si x N y membrane. The thickness of an absorber layer must be in the range of several tens of micrometers in order to obtain a contrast of more than 100 for the conventional DXRL process at the Pohang Light Source (PLS). However, a 3 µm thick absorber layer can provide a sufficient contrast if the modified DXRL of the central beam-stop method is used, which blocks high-energy x-rays. A nano shadow mask with 30 nm sized apertures is fabricated and a nano x-ray shadow mask with 250 nm sized apertures is fabricated by depositing a 3 µm thick absorber layer on a nano shadow mask with 500 nm sized apertures. HAR-nano structures (circles with a diameter of 420 nm and lines with a width of 274 nm) with aspect ratios of over 10:1 on a 3.2 µm SU-8 are successfully fabricated by using the nano x-ray shadow mask and the central beam-stop method

Fabrication and thermomechanical properties of nano-SiC/carbon nano-tubes composites

International Nuclear Information System (INIS)

Lanfant, Briac

2014-01-01

Ceramic carbides materials such as SiC, due to their refractory nature and their low neutron absorption are believed to be promising candidates for high temperature nuclear or aerospace applications. However, SiC brittleness has limited its structural application. In this context this work examines in a first part the possibilities to perform dense nano-structured SiC matrix by SPS without the use of sintering additive. Indeed a reduction of grain size (below 100 nm) accompanied by a high final density seem to be the solutions to counteract the brittleness and thus to improve mechanical properties. Dense (95%) and nano-structured (grain size around 100 nm) SiC samples were obtained thanks to the realization of an effective dispersion technique and the study on the sintering parameters effect. High hardness (2200 Hv) and decent fracture toughness (3.0 MPa.m1/2) were achieved. This first work also showed the preponderant influence of recurrent pollutants (oxygen and carbon) found in SiC powders on the final microstructure and mechanical properties of sintered samples. The oxygen as silica or silicon oxycarbide seems to promote densification mechanisms while free carbon (3.5 %wt) causes lower grain size and densification state. Mechanical properties with carbon are also negatively impacted (950 Hv and 2.4 MPa.m1/2). Such degradation is due by the specific localization of carbon structure between the grains. In return of the expected mechanical properties improvement by reducing the grain size, the thermal conductivity is drastically decrease of due to the phonon scattering at the grain boundaries. With the aim of reducing this effect, a second study was initiated by introducing multi-walled carbon nano-tubes (MWCNTs) into the SiC matrix. The MWCNTs by exhibiting a high toughness could also help to enhance the mechanical properties. Green bodies with different amounts of well dispersed MWCNTs (0 %wt to 5 %wt) were realized. Like free carbon, MWCNTs are located between

GREEN PACKAGING, GREEN PRODUCT, GREEN ADVERTISING, PERSEPSI, DAN MINAT BELI KONSUMEN

OpenAIRE

Imam Santoso; Rengganis Fitriani

2016-01-01

Environmental problems become one of the strategic issues in achieving global competitiveness. One of the issues is products that are made from environmental friendly materials or known as green product. Furthermore, in green products marketing, the company also uses green packaging and green advertising concept. This study aimed to analyze the effect of green packaging, green products, and green advertising on consumer perception and purchasing intention. The study was conducted in Ketawangg...

Study of nano-metric silicon carbide powder sintering. Application to fibers processing

International Nuclear Information System (INIS)

Malinge, A.

2011-01-01

Silicon carbide ceramic matrix composites (SiCf/SiCm) are of interest for high temperature applications in aerospace or nuclear components for their relatively high thermal conductivity and low activation under neutron irradiation. While most of silicon carbide fibers are obtained through the pyrolysis of a poly-carbo-silane precursor, sintering of silicon carbide nano-powders seems to be a promising route to explore. For this reason, pressureless sintering of SiC has been studied. Following the identification of appropriate sintering aids for the densification, optimization of the microstructure has been achieved through (i) the analysis of the influence of operating parameters and (ii) the control of the SiC β a SiC α phase transition. Green fibers have been obtained by two different processes involving the extrusion of SiC powder dispersion in polymer solution or the coagulation of a water-soluble polymer containing ceramic particles. Sintering of these green fibers led to fibers of around fifty microns in diameter. (author) [fr

El comercio electrónico en los tratados de libre comercio de México

OpenAIRE

Sigmond, Karen

2018-01-01

Resumen: Este artículo iniciará con los antecedentes del desarrollo del régimen del derecho commercial internacional, desde el Acuerdo General sobre Aranceles Aduaneros y Comercio a la Organización Mundial del Comercio. Se definirá al comercio electrónico o E-commerce y se hará una referencia de las tendencias de crecimiento actuales, seguida de la manera en la que se regula esta materia en México. Se estudiará la cobertura del comercio electrónico en los Tratados de Libre Comercio de México,...

Nano-dot and nano-pit fabrication on a GaAs substrate by a pulse applied AFM

International Nuclear Information System (INIS)

Kim, H C; Yu, J S; Ryu, S H

2012-01-01

The nano-patterning characteristics of GaAs is investigated using a pulse applied atomic force microscope (AFM). Very short range voltage pulses of micro to nano-seconds’ duration are applied to a conductive diamond-coated silicon (Si) tip in contact mode, to regulate the created feature size. The effects of pulse conditions such as pulse voltage, duration, frequency, offset voltage, anodization time, and applied tip pressure on nano-dot generation are characterized, based on the experiments. An interesting phenomenon, nano-pit creation instead of nano-dot creation, is observed when the applied pulse duration is less than 100 μs. Pulse frequency and offset voltage are also involved in nano-pit generation. The electrical spark discharge between the tip and the GaAs's surface is the most probable cause of the nano-pit creation and its generation mechanism is explained by considering the relevant pulse parameters. Nano-pits over 15 nm in depth are acquired on the GaAs substrate by adjusting the pulse conditions. This research facilitates the fabrication of more complex nano-structures on semiconductor materials since nano-dots and nano-pits could be easily made without any additional post-processes. (paper)

Development of nano SiO2 incorporated nano zinc phosphate coatings on mild steel

International Nuclear Information System (INIS)

Tamilselvi, M.; Kamaraj, P.; Arthanareeswari, M.; Devikala, S.; Selvi, J. Arockia

2015-01-01

Highlights: • Nano SiO 2 incorporated nano zinc phosphate coating on mild steel was developed. • Coatings showed enhanced corrosion resistance. • The nano SiO 2 is adsorbed on mild steel surface and become nucleation sites. • The nano SiO 2 accelerates the phosphating process. - Abstract: This paper reports the development of nano SiO 2 incorporated nano zinc phosphate coatings on mild steel at low temperature for achieving better corrosion protection. A new formulation of phosphating bath at low temperature with nano SiO 2 was attempted to explore the possibilities of development of nano zinc phosphate coatings on mild steel with improved corrosion resistance. The coatings developed were studied by Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDX), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and Electrochemical measurements. Significant variation in the coating weight, morphology and corrosion resistance was observed as nano SiO 2 concentrations varied from 0.5–4 g/L. The results showed that, the nano SiO 2 in the phosphating solution changed the initial potential of the interface between mild steel substrate and phosphating solution and reduce the activation energy of the phosphating process, increase the nucleation sites and yielded zinc phosphate coatings of higher coating weight, greater surface coverage and enhanced corrosion resistance. Better corrosion resistance was observed for coatings derived from phosphating bath containing 1.5 g/L nano SiO 2 . The new formulation reported in the present study was free from Ni or Mn salts and had very low concentration of sodium nitrite (0.4 g/L) as accelerator

La gimnasia con aparatos, una interesante propuesta para la ocupación del tiempo libre de los cadetes de 19-20 años

Directory of Open Access Journals (Sweden)

Lázaro E . Díaz Medina

2010-12-01

Full Text Available Desde que el hombre comenzó a vivir en comunidad, al concluir sus actividades fundamentales del día, trató de ocupar el tiempo libre restante en divertirse, realizar actividades físicas, pasear etcétera. Al pasar los siglos la vida se fue haciendo más agitada, más cargada por lo que el poco tiempo libre que el hombre poseía trató de ocuparlo con actividades que le ayudaran a sobreponerse del cansancio de un día de trabajo, por lo que se hizo necesario inventar nuevos juegos, centros de recreación, lugares donde poder practicar deportes, etcétera, con el objetivo de hacer la vida más llevadera a estas personas. Las actividades físico-recreativas son aquellas de carácter físico, deportivo o turístico a los cuales el hombre se dedica voluntariamente en su tiempo libre para el desarrollo activo, diversión y desenvolvimiento individual y persiguen como objetivo principal la satisfacción de necesidades de movimiento del hombre para lograr como resultado final salud y alegría por lo que podemos inferir que reviste gran importancia para nuestra sociedad su empleo.

To be nano or not to be nano?

Science.gov (United States)

Joachim, Christian

2005-02-01

Nanomaterials, nanostructures, nanostructured materials, nanoimprint, nanobiotechnology, nanophysics, nanochemistry, radical nanotechnology, nanosciences, nanooptics, nanoelectronics, nanorobotics, nanosoldiers, nanomedecine, nanoeconomy, nanobusiness, nanolawyer, nanoethics to name a few of the nanos. We need a clear definition of all these burgeoning fields for the sake of the grant attribution, for the sake of research program definition, and to avoid everyone being lost in so many nanos.

Facile large scale synthesis of Bi{sub 2}S{sub 3} nano rods–graphene composite for photocatalytic photoelectrochemical and supercapacitor application

Energy Technology Data Exchange (ETDEWEB)

Vadivel, S. [Electrochemical Engineering Laboratory, Department of Chemical Engineering, C. Tech Campus, Anna University, Chennai-600 025 (India); Naveen, A. Nirmalesh [Department of Physics, Anna University, Chennai, Tamil Nadu 600025 (India); Kamalakannan, V.P. [Electrochemical Engineering Laboratory, Department of Chemical Engineering, C. Tech Campus, Anna University, Chennai-600 025 (India); Cao, P. [Department of Chemistry and Materials Engineering, The University of Auckland, PB 92019, Auckland 1142 (New Zealand); Balasubramanian, N., E-mail: nbsbala@annauniv.edu [Electrochemical Engineering Laboratory, Department of Chemical Engineering, C. Tech Campus, Anna University, Chennai-600 025 (India)

2015-10-01

Graphical abstract: - Highlights: • A Bi{sub 2}S{sub 3}/RGO composite was synthesized by one pot precipitation method. • The synthesized Bi{sub 2}S{sub 3}/RGO composite exhibit rod like morphology. • As synthesized composite was applied for malachite green degradation. • The synthesized Bi{sub 2}S{sub 3}/RGO composite exhibits a specific capacitance of 290 F g{sup −1} at a scan rate of 1 A g{sup −1}. • Photocatalytic and supercapacitor properties of Bi{sub 2}S{sub 3} were enhanced mainly due to effective graphene incorporation. - Abstract: Bi{sub 2}S{sub 3} nano rods–graphene (BG) composite material was synthesized by a simple one step precipitation method. The crystallanity, structural and morphological properties were studied by the X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy techniques. The photocatalytic activity of BG was evaluated by the photocatalytic degradation of malachite green dye (MG) aqueous solution under the visible light irradiation. The effect of graphene content on the photoelectrochemical property of Bi{sub 2}S{sub 3} nano rods was also studied. The enhancement of photocurrent and photocatalytic properties of BG composite attributed to the synergistic effect between the Bi{sub 2}S{sub 3} nano rods and graphene sheets which improves the charge separation efficiency in Bi{sub 2}S{sub 3} nano rods. The supercapacitor behavior was studied using cyclic voltametry and galvanostatic charge discharge studies. The BG composite exhibits a maximum specific capacitance of 290 F g{sup −1} at a current density of 1 A g{sup −1}. The present study may provide as a new approach in improving the performance of BG composite in supercapacitor, solar cells and photocatalytic applications.

Greens of the European Green Capitals

Science.gov (United States)

Cömertler, Seval

2017-10-01

Well established and maintained green areas have a key role on reaching the high quality of life and sustainability in urban environments. Therefore, green areas must be carefully accounted and evaluated in the urban planning affairs. In this context, the European Green Capitals, which attach a great importance to the green areas, have a great potential to act as a role model for both small and big cities in all around the world. These leading cities (chronologically, Stockholm, Hamburg, Vitoria-Gasteiz, Nantes, Copenhagen, Bristol, Ljubljana, Essen and Nijmegen) are inspiring for the other cities which seek to achieve more sustainable and environmentally friendly places through green areas. From this point of view, the aim of this paper was to investigate the green areas of the European Green Capitals. The paper covered whole European Green Capitals, and the application form of each Green Capital was used as a primary data source. Consequently, the paper put forwarded that the European Green Capitals have considerably large amount and high proportion of green areas. Further, these cities provide an excellent access to the public green areas. As a result of abundant provision and proper distribution, the almost all citizens in most of the Green Capitals live within a distance of 300 meters to a green area. For further researches, the paper suggested that these green capitals should be investigated in terms of their efforts, measures, goals and plans, policies and implications to administer, to protect, to enhance and to expand the green areas.

The nano-materials, at the heart of the nano galaxy; Les nano-materiaux, au coeur de la galaxie nano

Energy Technology Data Exchange (ETDEWEB)

Le Marois, G. [Direction Generale de l' Industrie, des Technologies de l' Information et des Postes, 75 - Paris (France); Carlac, D. [Societe Developpement et Conseil, 51 - Reims (France)

2004-02-01

The researches on nano-materials are continuously increasing in most of industrialized countries. Between 1998 and 2003, the corresponding investment has been multiplied by six in Europe, eight in Usa and in Japan, to reach 3 milliards of euros in the world. Based on the nano-technologies development, these materials would represent the main part of the market at short and middle dated. Many examples of utilization are presented. (A.L.B.)

Aluminum Templates of Different Sizes with Micro-, Nano- and Micro/Nano-Structures for Cell Culture

Directory of Open Access Journals (Sweden)

Ming-Liang Yen

2017-10-01

Full Text Available This study investigates the results of cell cultures on aluminum (Al templates with flat-structures, micro-structures, nano-structures and micro/nano-structures. An Al template with flat-structure was obtained by electrolytic polishing; an Al template with micro-structure was obtained by micro-powder blasting; an Al template with nano-structure was obtained by aluminum anodization; and an Al template with micro/nano-structure was obtained by micro-powder blasting and then anodization. Osteoblast-like cells were cultured on aluminum templates with various structures. The microculture tetrazolium test assay was utilized to assess the adhesion, elongation, and proliferation behaviors of cultured osteoblast-like cells on aluminum templates with flat-structures, micro-structures, nano-structures, and micro/nano-structures. The results showed that the surface characterization of micro/nano-structure of aluminum templates had superhydrophilic property, and these also revealed that an aluminum template with micro/nano-structure could provide the most suitable growth situation for cell culture.

Tiempo libre de enfermedad en infecciones urinarias recurrentes según profilaxis con antibiótico o con vacuna bacteriana

OpenAIRE

Santo Bueno, Pedro José

2014-01-01

[ES]Estudio comparativo de dos tipos de tratamientos profilacticos, antibioterapia supresiva y vacuna bacteriana, en infecciones urinarias de repetición, para determinar el tiempo libre de enfermedad, entendida como el tiempo transcurrido entre la finalización de la profilaxis y la aparición de un episodio de infeccion urinario.

El Frente Negro y el Movimiento Alemania Libre en la Argentina durante las décadas de 1930 y 1940

Directory of Open Access Journals (Sweden)

Germán Friedmann

Full Text Available Este artículo analiza la constitución, la organización y las acciones emprendidas por el Schwarze Front (Frente Negro y del Frei-Deutschland Bewegung (Movimiento Alemania Libre en la Argentina durante las décadas de 1930 y 1940. Lideradas desde el exilio por Otto Strasser, ambas agrupaciones se opusieron al Tercer Reich. Strasser, uno de los principales organizadores del partido nacionalsocialista alemán debió abandonar su país en 1933 debido a un fuerte enfrentamiento con Hitler, al que acusaba de traicionar los ideales del nacionalsocialismo. El trabajo se centra en las redes establecidas entre los integrantes del Frente Negro y el Movimiento Alemania Libre con otros países de América; en el papel que tuvieron en las denuncias de la "infiltración nazi" en el Cono Sur, y en las relaciones que entablaron con los germanoparlantes antinazis de la Argentina.

Plan de actividades físico-recreativas para la ocupación del tiempo libre en los adolescentes de 15 a 18 años del Municipio Carirubana en el Consejo Comunal Sabana Grande

Directory of Open Access Journals (Sweden)

Yamila Sánchez Bello

2011-12-01

Full Text Available El presente trabajo tiene como base el estudio acerca de la ocupación del tiempo libre, por su positiva influencia en la formación de la personalidad del hombre manifestada en su modo de vida al cambiar hábitos, ideología y cultura social de cómo ocuparlo. Consta de tres capítulos que van desde, las concepciones del tiempo libre y la recreación el primero sobre, la caracterización del grupo, la comunidad y resultados del diagnóstico inicial, donde se constata cuál es el tiempo libre que disponen los adolescentes y la poca sistematicidad en actividades, al aplicar de los métodos teóricos y empíricos en el segundo, y un tercer capítulo donde se realiza la fundamentación del plan de actividades físico-recreativa para ocupar el tiempo libre de los adolescentes y al final se analizan los resultados obtenido tras su puesta en marcha. Las actividades van acompañadas de acciones encaminadas a transformar conductas desacordes al buen desarrollo humano, para este propósito se escogieron un grupo de adolescentes en edades entre 15-18 años del municipio Carirubana en el Consejo Comunal Sabana Grande. El plan tuvo como base la aplicación de los conceptos: Tiempo libre, comunidad, adolescente.

Fungus-Mediated Green Synthesis of Silver Nanoparticles Using Aspergillus terreus

Directory of Open Access Journals (Sweden)

Koji Yokoyama

2011-12-01

Full Text Available The biosynthesis of nanoparticles has received increasing attention due to the growing need to develop safe, cost-effective and environmentally friendly technologies for nano-materials synthesis. In this report, silver nanoparticles (AgNPs were synthesized using a reduction of aqueous Ag+ ion with the culture supernatants of Aspergillus terreus. The reaction occurred at ambient temperature and in a few hours. The bioreduction of AgNPs was monitored by ultraviolet-visible spectroscopy, and the AgNPs obtained were characterized by transmission electron microscopy and X-ray diffraction. The synthesized AgNPs were polydispersed spherical particles ranging in size from 1 to 20 nm and stabilized in the solution. Reduced nicotinamide adenine dinucleotide (NADH was found to be an important reducing agent for the biosynthesis, and the formation of AgNPs might be an enzyme-mediated extracellular reaction process. Furthermore, the antimicrobial potential of AgNPs was systematically evaluated. The synthesized AgNPs could efficiently inhibit various pathogenic organisms, including bacteria and fungi. The current research opens a new avenue for the green synthesis of nano-materials.

Nuevas formas de valorización del conocimiento en el esquema de realización de ganancia del capital : caso: Asociación Mexicana Empresarial del Software Libre

OpenAIRE

Cano Robles, Alfonso

2010-01-01

Para hacer evidente las dinámicas que rigen la sociedad capitalista del conocimiento. Se observa una realidad en movimiento que presenta nuevas formas de valorización y de realización de ganancia. A partir de estas categorías de análisis, se observa la realidad concreta que presenta la industria del software en general y del contexto mexicano en particular ante la práctica social del software libre en la Asociación Mexicana Empresarial del software libre (AMESOL). Para ello, se hace uso de la...

Functional Nano fibers: Production and Applications

International Nuclear Information System (INIS)

Khatri, Z.; Kim, I.S.; Kim, S.H.

2016-01-01

Nano fibers are lighter material with higher surface area in comparison to polymeric film. The ease of producing functional nano fiber is another advantage over many nano materials. Functional nano fiber in particular has attained a greater interest in recent years. The applications of functional nano fibers are increasing in various technical fields such as water filter membranes, tissue engineering, biosensors, drug delivery systems, wound dressings, catalysis, antibacterial. This special issue is comprised of well-selective articles that discuss production of functional nano fibers their applications in different emerging fields. M. Zhang et al. have presented exciting work on drug delivery using nano fibers. They used collagen that was extracted from abandoned Rana chensinensis skin in northeastern China via an acid enzymatic extraction method. They demonstrated two different nano fiber-vancomycin (VCM) systems, that is, VCM blended nano fibers and core-shell nano fibers with VCM in the core, and both systems sustained control release for a period of 80 hours. Another work was presented by R. Takai et al. on blood purification using composite nano fibers. About 10% of the population worldwide is affected by chronic kidney disease (CKD). The authors developed nano fiber meshes zeolite-polymer composite nano fibers for efficient adsorption of creatinine, which is a simpler and more accessible method for hemodialysis (HD) patients.

Effects of incorporation of nano-fluorapatite or nano-fluorohydroxyapatite on a resin-modified glass ionomer cement.

Science.gov (United States)

Lin, Jun; Zhu, Jiajun; Gu, Xiaoxia; Wen, Wenjian; Li, Qingshan; Fischer-Brandies, Helge; Wang, Huiming; Mehl, Christian

2011-03-01

This study aimed to investigate the fluoride release properties and the effect on bond strength of two experimental adhesive cements. Synthesized particles of nano-fluorapatite (nano-FA) or nano-fluorohydroxyapatite (nano-FHA) were incorporated into a resin-modified glass ionomer cement (Fuji Ortho LC) and characterized using X-ray diffraction and scanning electron microscopy. Blocks with six different concentrations of nano-FA or nano-FHA were manufactured and their fluoride release properties evaluated by ultraviolet spectrophotometry. The unaltered glass ionomer cement Fuji Ortho LC (GC, control) and the two experimental cements with the highest fluoride release capacities (nano-FA+Fuji Ortho LC (GFA) and nano-FHA+Fuji Ortho LC (GFHA)) were used to bond composite blocks and orthodontic brackets to human enamel. After 24 h water storage all specimens were debonded, measuring the micro-tensile bond strength (μTBS) and the shear bond strength (SBS), respectively. The optimal concentration of added nano-FA and nano-FHA for maximum fluoride release was 25 wt.%, which nearly tripled fluoride release after 70 days compared with the control group. GC exhibited a significantly higher SBS than GFHA/GFA, with GFHA and GFA not differing significantly (P>0.05). The μTBS of GC and GFA were significantly higher than that of GFHA (P≤0.05). The results seem to indicate that the fluoride release properties of Fuji Ortho LC are improved by incorporating nano-FA or nano-FHA, simultaneously maintaining a clinically sufficient bond strength when nano-FA was added. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Selective and lithography-independent fabrication of 20 nm nano-gap electrodes and nano-channels for nanoelectrofluidics applications

International Nuclear Information System (INIS)

Zhang, J Y; Wang, X F; Wang, X D; Fan, Z C; Li, Y; Ji, An; Yang, F H

2010-01-01

A new method has been developed to selectively fabricate nano-gap electrodes and nano-channels by conventional lithography. Based on a sacrificial spacer process, we have successfully obtained sub-100-nm nano-gap electrodes and nano-channels and further reduced the dimensions to 20 nm by shrinking the sacrificial spacer size. Our method shows good selectivity between nano-gap electrodes and nano-channels due to different sacrificial spacer etch conditions. There is no length limit for the nano-gap electrode and the nano-channel. The method reported in this paper also allows for wafer scale fabrication, high throughput, low cost, and good compatibility with modern semiconductor technology.

ACG46/6: Reconocimiento de cr??ditos de libre configuraci??n de los cursos de idiomas impartidos por el Instituto Confucio.

OpenAIRE

Universidad de Granada

2011-01-01

Aprobaci??n de reconocimiento de cr??ditos de libre configuraci??n de los cursos de idiomas impartidos por el Instituto Confucio, aprobado en Sesi??n Extraordinaria del Consejo de Gobierno de la Universidad de Granada celebrado el 13 de julio de 2011.

Nano materials for Energy and Environmental Applications

International Nuclear Information System (INIS)

Srinivasan, S.; Kannan, A.M.; Kothurkar, N.; Khalil, Y.; Kuravi, S.

2015-01-01

Nano materials enabled technologies have been seamlessly integrated into applications such as aviation and space, chemical industry, optics, solar hydrogen, fuel cell, batteries, sensors, power generation, aeronautic industry, building/construction industry, automotive engineering, consumer electronics, thermoelectric devices, pharmaceuticals, and cosmetic industry. Clean energy and environmental applications often demand the development of novel nano materials that can provide shortest reaction pathways for the enhancement of reaction kinetics. Understanding the physicochemical, structural, microstructural, surface, and interface properties of nano materials is vital for achieving the required efficiency, cycle life, and sustain ability in various technological applications. Nano materials with specific size and shape such as nano tubes, nano fibers/nano wires, nano cones, nano composites, nano rods, nano islands, nanoparticles, nanospheres, and nano shells to provide unique properties can be synthesized by tuning the process conditions.

Nano

DEFF Research Database (Denmark)

Nørgaard, Bent; Engel, Lars Romann

2007-01-01

Gennem de sidste par år har et lille ord med et meget stort potentiale gentagende trængt sig på i den offentlige bevidsthed, det er ordet "nano". Nanovidenskab og nanoteknologi er lige nu to af de "hotteste" forskningsområder og betragtes af mange som porten til en helt ny verden af muligheder....... Muligheder, vi endnu ikke kender konsekvenserne af. Center for Kunst og Videnskabs forestilling NANO giver dig chancen for at blive bekendt med verdens mindste byggesten og idégrundlaget for nanoforskningen. Vi har skabt et rum, som på mange måder minder om et laboratorium. Rummet er forsynet med storskærme......, kolber, væsker og nanopartikler. Her vil du f.eks. opleve, hvordan forskere tilfører guld helt nye egenskaber. Forestillingen veksler mellem kemiske arbejdsdemonstrationer, stemningsskabende musik og livlig debat på storskærme mellem eksperter. NANO opfordrer publikum til at tage stilling til forskningen...

From green architecture to architectural green

DEFF Research Database (Denmark)

Earon, Ofri

2011-01-01

that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One......The paper investigates the topic of green architecture from an architectural point of view and not an energy point of view. The purpose of the paper is to establish a debate about the architectural language and spatial characteristics of green architecture. In this light, green becomes an adjective...

The therapeutic effect of nano-encapsulated and nano-emulsion forms of carvacrol on experimental liver fibrosis.

Science.gov (United States)

Hussein, Jihan; El-Banna, Mona; Mahmoud, Khaled F; Morsy, Safaa; Abdel Latif, Yasmin; Medhat, Dalia; Refaat, Eman; Farrag, Abdel Razik; El-Daly, Sherien M

2017-06-01

The present study aimed to compare the therapeutic efficiency of nano-encapsulated and nano-emulsion carvacrol administration on liver injury in thioacetamide (TAA) treated rats. To fulfill our target, we used sixty male albino rats classified into six groups as follow: control, nano-encapsulated carvacrol, nano-emulsion carvacrol, thioacetamide, treated nano-encapsulated carvacrol and treated nano-emulsion carvacrol groups. Blood samples were collected from all groups and the separated serum was used for analysis of the following biochemical parameters; aspartate aminotransferase (AST), alanine aminotransferase (ALT), S100 B protein, alpha fetoprotein (AFP) and caspase-3. The levels of malondialdehyde (MDA), reduced glutathione (GSH), nitric oxide (NO), monocyte chemoattractant protein-1(MCP-1) and hydroxyproline content were all evaluated in liver tissue homogenate. Histopathological examinations for liver tissues were also performed. Thioacetamide induced hepatic damage in rats as revealed by the significant increase in the levels of serum ALT, AST and produced oxidative stress as displayed by the significant elevation in the levels of hepatic MDA and NO concomitant with a significant decrease in GSH. In addition, thioacetamide significantly increased serum S100B protein, alpha fetoprotein and caspase-3 along with hepatic MCP-1 and hydroxyproline; these results were confirmed by the histopathological investigation. In contrast, nano-encapsulated and nano-emulsion carvacrol were able to ameliorate these negative changes in the thioacetamide injected rats. However, the effect of the nano-encapsulated form of carvacrol was more prominent than the nano-emulsion form. Nano-encapsulated and nano-emulsion carvacrol can ameliorate thioacetamide induced liver injury. These results could be attributed to the potential anti-inflammatory, antioxidant, and anti-apoptotic activities of carvacrol in addition to the effectiveness of the encapsulation technique that can protect

Nano medicine in Action: An Overview of Cancer Nano medicine on the Market and in Clinical Trials

International Nuclear Information System (INIS)

Wang, R.; Billone, P.S.; Mullett, W.M.

2013-01-01

Nano medicine, defined as the application of nano technology in the medical field, has the potential to significantly change the course of diagnostics and treatment of life-threatening diseases, such as cancer. In comparison with traditional cancer diagnostics and therapy, cancer nano medicine provides sensitive cancer detection and/or enhances treatment efficacy with significantly minimized adverse effects associated with standard therapeutics. Cancer nano medicine has been increasingly applied in areas including nano drug delivery systems, nano pharmaceuticals, and nano analytical contrast reagents in laboratory and animal model research. In recent years, the successful introduction of several novel nano medicine products into clinical trials and even onto the commercial market has shown successful outcomes of fundamental research into clinics. This paper is intended to examine several nano medicines for cancer therapeutics and/or diagnostics-related applications, to analyze the trend of nano medicine development, future opportunities, and challenges of this fast-growing area.

A Fabrication Technique for Nano-gap Electrodes by Atomic Force Microscopy Nano lithography

International Nuclear Information System (INIS)

Jalal Rouhi; Shahrom Mahmud; Hutagalung, S.D.; Kakooei, S.

2011-01-01

A simple technique is introduced for fabrication of nano-gap electrodes by using nano-oxidation atomic force microscopy (AFM) lithography with a Cr/ Pt coated silicon tip. AFM local anodic oxidation was performed on silicon-on-insulator (SOI) surfaces by optimization of desired conditions to control process in contact mode. Silicon electrodes with gaps of sub 31 nm were fabricated by nano-oxidation method. This technique which is simple, controllable, inexpensive and fast is capable of fabricating nano-gap structures. The current-voltage measurements (I-V) of the electrodes demonstrated very good insulating characteristics. The results show that silicon electrodes have a great potential for fabrication of single molecule transistors (SMT), single electron transistors (SET) and the other nano electronic devices. (author)

El reto de las transferencias de colgajos libres en pacientes quemados: ¿cuál es el momento para la cirugía?

Directory of Open Access Journals (Sweden)

M.E. Villaverde-Doménech

Full Text Available La transferencia de colgajos libres es una herramienta fundamental dentro del arsenal reconstructivo para el tratamiento quirúrgico del gran quemado. Durante años ha existido controversia sobre la influencia del momento de la cirugía sobre la tasa de complicaciones, así como el alto riesgo de complicaciones al realizar reconstrucciones con colgajos libres en pacientes quemados. Diseñamos un estudio retrospectivo de las reconstrucciones quirúrgicas mediante colgajos libres realizadas en nuestra Unidad de Quemados del Hospital Universitari y Politecnic La Fe, de Valencia (España en el periodo comprendido entre 2001 y 2013, recogiendo todos los datos relativos al paciente, a la lesión, al procedimiento reconstructivo, a los resultados y relacionando todo ello con el momento en el cual se realizó la cirugía. Para el análisis de los datos y asociaciones entre distintas variables usamos tablas de contingencia y aplicamos el test de independencia de Chi-cuadrado. Exponemos además 2 casos clínicos representativos de la cirugía reconstructiva practicada en pacientes quemados. Recogimos en total datos de 21 procedimientos de reconstrucción mediante colgajo libre en pacientes quemados. En ninguno se realizó reconstrucción primaria inmediata (en los primeros 5 días, mientras que la reconstrucción primaria temprana (entre el día 5 y el 21 se realizó en el 28,57 % de los casos, la primaria intermedia (entre el día 21 y las 6 semanas en el 28,57 %, la secundaria (más de 6 semanas en el 9,5 %, y la cirugía de secuelas en el 33,33 % de los casos. Las tasas de complicaciones mayores y menores fueron respectivamente 19,05 % y 9,5 % . El 50 % de complicaciones mayores ocurrieron en el periodo de reconstrucción primaria temprana, mientras que no registramos ninguna en el periodo primario intermedio. El resto de complicaciones se repartió a partes iguales entre el periodo secundario y la cirugía de secuelas (ambas con el 25 %. No

The Influence of Proactive Green Innovation and Reactive Green Innovation on Green Product Development Performance: The Mediation Role of Green Creativity

Directory of Open Access Journals (Sweden)

Yu-Shan Chen

2016-09-01

Full Text Available This study fills the research gap in the exploration of the relationships between both proactive and reactive green innovations and green product development performance, and examines the mediating effect of green creativity. Structural equation modeling (SEM is utilized to test the hypotheses. From the sample of 146 valid respondents, the results show that proactive green innovation positively affects green creativity and green product development performance, and green creativity positively affects green product development performance. In addition, our findings also indicate that the relationship between proactive green innovation and green product development performance is partially mediated by green creativity. Accordingly, green creativity plays a critical role for companies to achieve a great green product development performance. However, reactive green innovation does not significantly influence green creativity and green product development performance. Companies should develop proactive green innovation rather than reactive green innovation in order to enhance their green creativity and increase their product development performance.

Ceramic compositions based on nano forsterite/nano magnesium aluminate spinel powders

International Nuclear Information System (INIS)

Khattab, R.M.; Wahsh, M.M.S.; Khalil, N.M.

2015-01-01

According to the wide applications in the field of chemical and engineering industries, forsterite (Mg_2SiO_4)/spinel (MgAl_2O_4) ceramic compositions were the matter of interest of several research works during the last three decades. This work aims at preparation and characterization of improved ceramic bodies based on forsterite and spinel nano powders through controlling the forsterite and spinel contents in the prepared mixes. These prepared ceramic compositions have been investigated through measuring the densification parameters, cold crushing strength as well as volume resistively. Nano spinel was added from 0 to 30 mass% on expense of nano forsterite matrix and fired at 1550 °C for 2 h. The phase composition of the fired samples was examined using x-ray diffraction (XRD) technique. The microstructure of some selected samples was shown using scanning electron microscope (SEM). A pronounced improvement in the sintering, mechanical properties and volume resistively were achieved with increasing of nano spinel addition up to 15 mass%. This is due to the improvement in the matrix of the prepared forsterite/spinel bodies as a result of well distribution of spinel in the forsterite matrix as depicted by SEM analysis. - Highlights: • Ceramic compositions based on nano forsterite/nano-MgAl_2O_4 spinel were synthesized. • CCS was improved (333.78 MPa) through 15 mass% of nano-MgAl_2O_4 spinel addition. • Volume resistivity was enhanced to 203*10"1"3 Ohm cm with 15 mass% of spinel addition. • Beyond 15 mass% spinel, CCS and volume resistivity were decreased.

DFT study of gases adsorption on sharp tip nano-catalysts surface for green fertilizer synthesis

Science.gov (United States)

Yahya, Noorhana; Irfan, Muhammad; Shafie, Afza; Soleimani, Hassan; Alqasem, Bilal; Rehman, Zia Ur; Qureshi, Saima

2016-11-01

The energy minimization and spin modifications of sorbates with sorbents in magnetic induction method (MIM) play a vital role in yield of fertilizer. Hence, in this article the focus of study is the interaction of sorbates/reactants (H2, N2 and CO2) in term of average total adsorption energies, average isosteric heats of adsorption energies, magnetic moments, band gaps energies and spin modifications over identical cone tips nanocatalyst (sorbents) of Fe2O3, Fe3O4 (magnetic), CuO and Al2O3 (non-magnetic) for green nano-fertilizer synthesis. Study of adsorption energy, band structures and density of states of reactants with sorbents are purely classical and quantum mechanical based concepts that are vividly illustrated and supported by ADSORPTION LOCATOR and Cambridge Seriel Total Energy Package (CASTEP) modules following classical and first principle DFT simulation study respectively. Maximum values of total average energies, total average adsorption energies and average adsorption energies of H2, N2 and CO2 molecules are reported as -14.688 kcal/mol, -13.444 kcal/mol, -3.130 kcal/mol, - kcal/mol and -6.348 kcal/mol over Al2O3 cone tips respectively and minimum over magnetic cone tips. Whereas, the maximum and average minimum values of average isosteric heats of adsorption energies of H2, N2 and CO2 molecules are figured out to be 3.081 kcal/mol, 4.842 kcal/mol and 6.848 kcal/mol, 0.988 kcal/mol, 1.554 kcal/mol and 2.236 kcal/mol over aluminum oxide and Fe3O4 cone tips respectively. In addition to the adsorption of reactants over identical cone sorbents the maximum and minimum values of net spin, electrons and number of bands for magnetite and aluminum oxide cone structures are attributed to 82 and zero, 260 and 196, 206 and 118 for Fe3O4 and Al2O3 cones respectively. Maximum and least observed values of band gap energies are figured out to be 0.188 eV and 0.018 eV with Al2O3 and Fe3O4 cone structures respectively. Ultimately, with the adsorption of reactants an

Pengaruh Green Marketing Hotel Terhadap Green Consumer Behavior

OpenAIRE

Yo Fernandez, Eunike Christe; Tjoanda, Evelyn

2017-01-01

Penelitian ini dilakukan untuk mengetahui pengaruh dari green marketing hotel terhadap green consumer behavior. Green marketing memiliki 3 dimensi, yaitu green product, green price, dan green promotion. Penelitian ini melibatkan 272 responden masyarakat Surabaya dan menggunakan metode regresi linear berganda. Hasil penelitian menunjukkan bahwa green product dan green price berpengaruh secara positif dan signifikan sedangkan green promotion berpengaruh namun tidak signifikan terhadap green con...

CZT nanoRAIDER_VFG Factsheet

Energy Technology Data Exchange (ETDEWEB)

James, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Bolotnikov, A. E. [Brookhaven National Lab. (BNL), Upton, NY (United States); Cui, Yonggang [Brookhaven National Lab. (BNL), Upton, NY (United States)

2016-01-15

Brookhaven National Laboratory (BNL) is working with FLIR System Inc., the manufacturer of the nanoRAIDER, to design a handheld device based on a position-sensitive virtual Frisch-grid (VFG) Cadmium-Zinc-Telluride (CdZnTe or CZT) detector array (with 1% or better energy resolution). The new device called nanoRAIDER VFG will be an improvement to the current nanoRAIDER, which is a compact gamma-ray detection instrument manufactured by FLIR Systems Inc. that employs relatively lower-performing CZT hemispheric detectors (i.e., 3%-FWHM CZT detectors). The nanoRAIDER will significantly improve the accuracy while maintaining similar efficiency, as compared to the nanoRAIDER, for in-field analysis of nuclear materials and detection of undeclared activities during inspections conducted by the International Atomic Energy Agency (IAEA). Since the nanoRAIDER is currently used by the IAEA as part of its Complementary Access toolkit, a relatively quick acceptance of the nanoRAIDER VFG for safeguards is anticipated. The nanoRAIDER VFG will help address several items listed in the IAEA’s Long-Term R&D Plan that could enhance the abilities to detect undeclared nuclear material and activities.

Memoria Prospectiva: Contexto y Calidad de Compromiso en una Situación de Recuerdo Libre Memoria Prospectiva: Contexto y Calidad de Compromiso en una Situación de Recuerdo Libre

Directory of Open Access Journals (Sweden)

Ariadna Crisantema Martínez Hernández

2012-02-01

Full Text Available The memory processes, including recall, are influenced by the objective and logical structure of knowledge, as well as by subjective and motivational aspects. The frequency and distribution of units in a free recall task provide information about the organization of memory and the accesibility of material. The objective of this work was to investigate prospective memory as a function of personality (i. e. selfregulation, goal´s commitment quality (i. e. obligation, intention and desire and context for which they are generated (i. e. labor and not-labor. Two instruments for free recall of goals were developed and were applied along with Action Control Scale to 70 hotel employees. The results indicate that the self-regulatory tendency, the quality of commitment and the context influence in the amount and structure of remembered goals. Los procesos de memoria, incluido el recuerdo, son influidos tanto por la estructura objetiva y lógica del conocimiento, como por aspectos subjetivos y motivacionales. La frecuencia y distribución de unidades en una tarea de recuerdo libre arrojan datos sobre la organización de la memoria y sobre la accesibilidad del material. En este trabajo se investigó la memoria prospectiva como función de la personalidad (i.e. tendencia autorregulatoria, de la calidad de compromiso de las metas (i.e. obligación, plan y deseo y del contexto para el cual se generan (laboral y no-laboral. Se desarrollaron dos instrumentos de recuerdo libre de metas; mismos que fueron aplicados junto con la Escala de Control de la Acción a 70 empleados de un hotel. Los resultados indican que la tendencia autorregulatoria, la calidad de compromiso y el contexto influyen en la cantidad y la estructura de las metas recordadas.

1D Nano materials 2012

International Nuclear Information System (INIS)

Yanqiu Zhu, Y.; Ma, R.; Whitby, R.; Acquah, S.

2013-01-01

We witnessed an initial hyped period and enthusiasm on carbon nano tubes in the 1990s later went through a significant expansion into nano tubes of other materials (metal di chalcogenides, boron nitride, etc.) as well as various nano wires and nano rods. While much of the hype might have gone, the research on one-dimensional (1D) nano materials has matured as one of the most active research areas within the nano science and nano technology community, flourishing with ample, exciting, and new research opportunities. Just like any other research frontier, researchers working in the 1D nano materials field are constantly striving to develop new fundamental science as well as potential applications. It remains a common belief that versatility and tunability of 1D nano materials would challenge many new rising tasks coming from our resource and energy demanding modern society. The traditional semiconductor industry has produced so many devices and systems from transistors, sensors, lasers, and LEDs to more sophisticated solar panels, which are now part of our daily lives. By down sizing the core components or parts to 1D form, one might wonder how fundamentally the dimensionality and morphology would impact the device performance, this is, as always, requiring us to fully understand the structure-property relationship in 1D nano materials. It may be equally crucial in connecting discovery-driven fundamental science to market-driven technology industry concerning potentially relevant findings derived from these novel materials. The importance of a platform that allows active researchers in this field to present their new development in a timely and efficient manner is therefore self-evident. Following the success of two early special issues devoted to 1D nano materials, this is the third one in a row organized by the same group of guest editors, attesting that such a platform has been well received by the readers

6. international conference on Nano-technology in Carbon: from synthesis to applications of nano-structured carbon and related materials

International Nuclear Information System (INIS)

2004-01-01

This is the sixth international conference sponsored this year by the French Carbon Group (GFEC), the European Research Group on Nano-tubes GDRE 'Nano-E', in collaboration with the British Carbon Group and the 'Institut des Materiaux Jean Rouxel' (local organizer). The aim of this conference is to promote carbon science in the nano-scale as, for example, nano-structured carbons, nano-tubes, nano-wires, fullerenes, etc. This conference is designed to introduce those with an interest in materials to current research in nano-technology and to bring together research scientists working in various disciplines in the broad area of nano-structured carbons, nano-tubes and fullerene-related nano-structures. Elemental carbon is the simplest exemplar of this nano-technology based on covalent bonding, however other systems (for example containing hetero-atoms) are becoming important from a research point of view, and provide alternative nano-materials with unique properties opening a broad field of applications. Nano-technology requires an understanding of these materials on a structural and textural point of view and this will be the central theme. This year the conference will feature sessions on: S1. Control and synthesis of nano-materials 1.1 Nano-structured carbons: pyrolysis of polymers, activation, templates,... 1.2 Nano-tubes: Catalytic method, HiPCO, graphite vaporization, electrolysis,... 1.3 Fullerenes S2. Chemistry of carbon nano-materials 2.1 Purification of carbon nano-tubes 2.2 Functionalization - Self-assembling S3. Structural characterization S4. Theory and modelling S5. Relationship between structure and properties S6. Applications Water and air purification, Gas and energy storage, Composite materials, Field emission, Nano-electronics, Biotechnology,... S7. Environmental impact. Only one paper concerning carbon under irradiation has been added to the INIS database. (authors)

Los proyectos de cooperación: una alternativa al tiempo libre de alumnos universitarios

OpenAIRE

Beatriz Núñez Angulo; Rafael Calvo de León; Jesús Mª Álvarez Martínez

2014-01-01

Es sabido por todos que la Universidad ha de fomentar los Proyectos de Cooperación, como función social. Presentamos la trayectoria de un proyecto de Cooperación al Desarrollo de la Universidad de Burgos que, a lo largo de 10 años se ha ido consolidando y ha permitido la participación directa de 88 personas entre profesores y alumnos, siendo una alternativa al tiempo libre del alumnado, tanto en el verano como durante el curso académico. Los resultados avalan el nivel de implicación de los es...

El boletín de la Institución Libre de Enseñanza BILE

Directory of Open Access Journals (Sweden)

Eulalia Martínez Medrano

2013-05-01

Full Text Available En este artículo presento un análisis descriptivo del Boletín de la Institución Libre de Enseñanza en sus dos épocas de existencia. . Períodos delimitados por los acontecimientos de nuestra guerra civil. La PRIMERA es la más importante por su duración, abarca sesenta años de publicación ininterrumpida, desde el año 1877 hasta la mitad de 1936. La SEGUNDA época del B.I. L.E , es relativamente reciente, reaparece en 1987 y lo edita la Fundación Francisco Giner de los Ríos. El revisar que misión se propuso esta revista, sus comienzos , evolución y estructuras contribuirá al convencimiento de que el Boletín constituye una fuente documental valiosísima e imprescindible para el estudioso de la Institución Libre de Enseñanza y también para quien quiera profundizar en la evolución de la Historia de la Educación Española de finales del siglo XIX y comienzos deL XX. Especialmente es fuente necesaria para conocer nuestra incorporación al Movimiento Pedagógico de la Escuela Nueva, directrices educativas que fueron seguidas por la I.L.E y de cuyos principios y realizaciones ha quedado constancia en las páginas de su Boletín.

Upconverting Nanoparticles as Optical Sensors of Nano- to Micro-Newton Forces

Energy Technology Data Exchange (ETDEWEB)

Lay, Alice; Wang, Derek S.; Wisser, Michael D.; Mehlenbacher, Randy D.; Lin, Yu [Stanford; Goodman, Miriam B.; Mao, Wendy L.; Dionne, Jennifer A.

2017-06-08

Mechanical forces affect a myriad of processes, from bone growth to material fracture to touch-responsive robotics. While nano- to micro-Newton forces are prevalent at the microscopic scale, few methods have the nanoscopic size and signal stability to measure them in vivo or in situ. Here, we develop an optical force-sensing platform based on sub-25 nm NaYF4 nanoparticles (NPs) doped with Yb3+, Er3+, and Mn2+. The lanthanides Yb3+ and Er3+ enable both photoluminescence and upconversion, while the energetically coupled d-metal Mn2+ adds force tunability through its crystal field sensitivity. Using a diamond anvil cell to exert up to 3.5 GPa pressure or ~10 μN force per particle, we track stress-induced spectral responses. The red (660 nm) to green (520, 540 nm) emission ratio varies linearly with pressure, yielding an observed color change from orange to red for α-NaYF4 and from yellow–green to green for d-metal optimized β-NaYF4 when illuminated in the near infrared. Consistent readouts are recorded over multiple pressure cycles and hours of illumination. With the nanoscopic size, a dynamic range of 100 nN to 10 μN, and photostability, these nanoparticles lay the foundation for visualizing dynamic mechanical processes, such as stress propagation in materials and force signaling in organisms.

Upconverting Nanoparticles as Optical Sensors of Nano- to Micro-Newton Forces.

Science.gov (United States)

Lay, Alice; Wang, Derek S; Wisser, Michael D; Mehlenbacher, Randy D; Lin, Yu; Goodman, Miriam B; Mao, Wendy L; Dionne, Jennifer A

2017-07-12

Mechanical forces affect a myriad of processes, from bone growth to material fracture to touch-responsive robotics. While nano- to micro-Newton forces are prevalent at the microscopic scale, few methods have the nanoscopic size and signal stability to measure them in vivo or in situ. Here, we develop an optical force-sensing platform based on sub-25 nm NaYF 4 nanoparticles (NPs) doped with Yb 3+ , Er 3+ , and Mn 2+ . The lanthanides Yb 3+ and Er 3+ enable both photoluminescence and upconversion, while the energetically coupled d-metal Mn 2+ adds force tunability through its crystal field sensitivity. Using a diamond anvil cell to exert up to 3.5 GPa pressure or ∼10 μN force per particle, we track stress-induced spectral responses. The red (660 nm) to green (520, 540 nm) emission ratio varies linearly with pressure, yielding an observed color change from orange to red for α-NaYF 4 and from yellow-green to green for d-metal optimized β-NaYF 4 when illuminated in the near infrared. Consistent readouts are recorded over multiple pressure cycles and hours of illumination. With the nanoscopic size, a dynamic range of 100 nN to 10 μN, and photostability, these nanoparticles lay the foundation for visualizing dynamic mechanical processes, such as stress propagation in materials and force signaling in organisms.

Structural, optical investigations of graphene from graphene oxide using green method

International Nuclear Information System (INIS)

Kumar, Dinesh; Shukla, Shobha; Saxena, Sumit

2015-01-01

Graphene nano sheets (GNS) are synthesized from Graphene Oxide (GO) using commercial sugar as a reducing agent. A green and facile approach is followed to synthesize chemically converted GNS using exfoliated GO as precursor. The merit of this method is that both the reducing agents themselves and the oxidized products are environmentally friendly. The prepared materials are characterized with X-ray diffraction (XRD), UV-Visible absorption spectroscopy, High resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). The results of XRD, UV-vis analysis provide a clear indication of removal of oxygen-containing groups from GO and the formation of GNS

Solvent-Mediated Eco-Friendly Synthesis and Characterization of Monodispersed Bimetallic Ag/Pd Nano composites for Sensing and Raman Scattering Applications

International Nuclear Information System (INIS)

Sathiyadevi, G.; Loganathan, B.; Karthikeyan, B.; Karthikeyan, B.

2014-01-01

The solvent-mediated eco-friendly monodispersed Ag/Pd bimetallic nano composites (BNCs) having thick core and thin shell have been prepared through novel green chemical solvent reduction method. Reducing solvent, dimethyl formamide (DMF) is employed for the controlled green synthesis. Characterization of the synthesized Ag/Pd BNCs has been done by x-ray diffraction (XRD) studies, high-resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray analysis (EDX), and high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) pattern. The nature of the interaction of L-cysteine with Ag/Pd BNCs has been studied by using surface plasmon spectroscopy, Fourier transform-infrared spectroscopy (FT-IR), cyclic voltammetry (CV), and theoretical methods.

Fundamental Issues of Nano-fluid Behavior

International Nuclear Information System (INIS)

Williams, Wesley C.

2006-01-01

This paper will elucidate some of the behaviors of nano-fluids other than the abnormal conductivity enhancement, which are of importance to the experimental and engineering use of nano-fluids. Nano-fluid is the common name of any sol colloid involving nano-scale (less than 100 nm) sized particles dispersed within a base fluid. It has been shown previously that the dispersion of nano-particulate metallic oxides into water can increase thermal conductivity up to 30-40% over that of the base fluid and anomalously more than the mere weighed average of the colloid. There is a great potential for the use of nano-fluids as a way to enhance fluid/thermal energy transfer systems. Due to the recentness of nano-fluid science, there are still many issues which have not been fully investigated. This paper should act as a primer for the basic understanding of nano-fluid behavior. Particle size and colloid stability are of key importance to the functionality of nano-fluids. The pH and concentration/loading of nano-fluids can alter the size of the nano-particles and also the stability of the fluids. It will be shown through experiment and colloid theory the importance of these parameters. Furthermore, most of the existing literature uses volume percentage as the measure of particle loading, which can often be misleading. There will be discussion of this and other misleading ideas in nano-fluid science. (author)

Análisis del software libre como herramienta de producción

Directory of Open Access Journals (Sweden)

Eduardo Miguel De la Hoz Correa

2010-01-01

Full Text Available En este artículo se muestran datos cuantitativos que permiten tener una idea más clara al momento de la evaluación en la adquisición de software y la implementación de código abierto y software libre. En él se examinan variables como el mercado objetivo, la fiabilidad, el rendimiento, la escalabilidad, seguridad y el costo de adquisición al momento de mirar al código abierto como alternativa viable con respecto al software propietario desde una perspectiva objetiva teniendo como base estudios a fondo a nivel mundial de aquellos factores que influyen en la toma de decisiones en todos los niveles de implementación del software de todo tipo.

Electrodeposition of nickel nano wire arrays

International Nuclear Information System (INIS)

Nur Ubaidah Saidin; Kok Kuan Ying; Ng Inn Khuan; Nurazila Mat Zali; Siti Salwa Zainal Abidin

2010-01-01

Synthesis, characterization and assembly of one-dimensional nickel nano wires prepared by template directed electrodeposition are discussed in this paper. Parallel arrays of high aspect ratio nickel nano wires were electrodeposited using electrolytes with different cations and pH. The nano wires were characterized using X-ray diffractometry and scanning electron microscopy. It was found that the orientations of the electro deposited Ni nano wires were governed by the deposition current and the electrolyte conditions. Free standing nickel nano wires can be obtained by dissolving the template. Due to the magnetic nature of the nano wires, magnetic alignment was employed to assemble and position the free standing nano wires in the device structure. (author)

Distintas o iguales: las diferencias en el trabajo doméstico de las parejas de doble ingreso entre las uniones libres y los matrimonios

Directory of Open Access Journals (Sweden)

Landy Sánchez Peña

2016-01-01

Full Text Available La brecha de género en el trabajo doméstico ha sido ampliamente estudiada en México, mostrando gradientes por nivel socioeconómico y diferencias asociadas a la participación de las mujeres en el trabajo extradoméstico. En este artículo indagamos en qué medida ambos procesos dan forma al reparto del trabajo doméstico entre parejas de doble provee - dor que difieren por tipo de unión. Basamos el análisis empírico en la ENIGH 2010 utilizando modelos de regresión. Nuestros resultados sugieren que la brecha de género en el trabajo doméstico es menor en las parejas en unión libre en comparación con las pa - rejas casadas, aun tomando en cuenta efectos de selección. Entre las primeras, la brecha se reduce mayormente conforme aumenta el ingreso, de modo que las parejas en unión libre y de alto ingreso representan el arreglo más equitativo en la división sexual del trabajo no remunerado. Ello se debe a que las mujeres en unión libre dedican menos tiempo al trabajo doméstico que las casadas, mientras que entre los varones no observamos diferencias.

Formation of Au nano-patterns on various substrates using simplified nano-transfer printing method

Science.gov (United States)

Kim, Jong-Woo; Yang, Ki-Yeon; Hong, Sung-Hoon; Lee, Heon

2008-06-01

For future device applications, fabrication of the metal nano-patterns on various substrates, such as Si wafer, non-planar glass lens and flexible plastic films become important. Among various nano-patterning technologies, nano-transfer print method is one of the simplest techniques to fabricate metal nano-patterns. In nano-transfer printing process, thin Au layer is deposited on flexible PDMS mold, containing surface protrusion patterns, and the Au layer is transferred from PDMS mold to various substrates due to the difference of bonding strength of Au layer to PDMS mold and to the substrate. For effective transfer of Au layer, self-assembled monolayer, which has strong bonding to Au, is deposited on the substrate as a glue layer. In this study, complicated SAM layer coating process was replaced to simple UV/ozone treatment, which can activates the surface and form the -OH radicals. Using simple UV/ozone treatments on both Au and substrate, Au nano-pattern can be successfully transferred to as large as 6 in. diameter Si wafer, without SAM coating process. High fidelity transfer of Au nano-patterns to non-planar glass lens and flexible PET film was also demonstrated.

Vinos, carnes, ferrocarriles y el Tratado de Libre Comercio entre Argentina y Chile (1905-1910)

OpenAIRE

Lacoste, Pablo

2004-01-01

Entre 1905 y 1910 Chile y Argentina negociaron la firma de un Tratado de Comercio con vistas a suprimir los aranceles aduaneros y consagrar el principio de "Cordillera Libre". El centro de atracción eran las exportaciones de ganado argentino a Chile y de vino chileno a Argentina. Pero en ambos países se produjo una fuerte reacción de los intereses creados con vistas a frustrar las tratativas diplomáticas. Tanto la Sociedad Nacional de Agricultura (Chile) como el Centro Vitivinícola Nacional (...

Calidad de vida y ocupación del tiempo libre en la jubilación

OpenAIRE

Hernández Izquierdo, María

2014-01-01

Hemos realizado una investigación sobre la calidad de vida y la ocupación del tiempo libre en personas cercanas a la jubilación. En el proyecto se han analizado el nivel de calidad de vida, las relaciones existentes entre la calidad de vida y otras variables sociodemográficas y las relaciones existentes entre la calidad de vida y otras variables relacionadas con el proceso de jubilación. A través de los resultados del estudio hemos podido corroborar las hipótesis de las que ...

Desarrollo de la competencia profesional con el trabajo colaborativo en proyectos innovadores de software libre

OpenAIRE

Arrés López, Eugenia

2012-01-01

El planteamiento, desarrollo y evaluación de una actividad profesional real permite un desarrollo más sencillo, rápido y motivador de las competencias profesionales. Este planteamiento se constató durante el desarrollo de proyectos de software libre de los alumnos de la Escuela Técnica Superior de Ingeniería informática y de Telecomunicaciones de la Universidad de Granada, en los que se integró informalmente un equipo con estudiantes de la Facultad de Traducción e Interpretación para mejorar ...

Participación en actividades físicas durante el tiempo libre y su relación con el estrés traumático secundario en bomberos

OpenAIRE

Rojas Quirós, Jimmy

2014-01-01

Determina entre la participación de actividades físicas durante el tiempo libre y su relación con el estrés traumático secundario en bomberos (ETS), en el personal de bomberos permanentes del Gran Área Metropolitana (GAM)costarricense,para ello se examinó cual era el nivel de participación en las actividades físicas durante el tiempo libre de los bomberos.En cuanto a la metodología.Sujetos: se evaluaron un total de 56 bomberos permanentes del Gran Área Metropolitana,(GAM),funcionarios del Cu...

Role of phase breaking processes on resonant spin transfer torque nano-oscillators

Science.gov (United States)

Sharma, Abhishek; Tulapurkar, Ashwin A.; Muralidharan, Bhaskaran

2018-05-01

Spin transfer torque nano-oscillators (STNOs) based on magnetoresistance and spin transfer torque effects find potential applications in miniaturized wireless communication devices. Using the non-coherent non-equilibrium Green's function spin transport formalism self-consistently coupled with the stochastic Landau-Lifshitz-Gilbert-Slonczewski's equation and the Poisson's equation, we elucidate the role of elastic phase breaking on the proposed STNO design featuring double barrier resonant tunneling. Demonstrating the immunity of our proposed design, we predict that despite the presence of elastic dephasing, the resonant tunneling magnetic tunnel junction structures facilitate oscillator designs featuring a large enhancement in microwave power up to 8μW delivered to a 50Ω load.

Implementation of smokefree workplaces: challenges in Latin America Implementación de lugares de trabajo libres de humo de tabaco: desafíos en América Latina

Directory of Open Access Journals (Sweden)

Gillian Griffith

2010-01-01

Full Text Available Latin America is at the forefront of global progress in smokefree workplaces. Comprehensive smokefree laws have been implemented in four countries, and in many cities, states and provinces. More than 130 million people in Latin America are now protected from secondhand tobacco smoke. Nevertheless, a survey of tobacco control advocates and governments in Latin America found several challenges to progress in smokefree workplaces: the need for voluntary workplace programs where there is no smokefree legislation; weak legislation or lack of comprehensive national smokefree laws; tobacco industry attempts to undermine progress with smokefree laws or overturn existing laws via litigation; lack of compliance with laws; the need for monitoring and evaluation of smokefree laws; the need to make better use of mass media campaigns; and strengthening civil society. However, much progress has already been achieved to address these challenges, in particular through collaborations and the exchange of experience and expertise across Latin America.América Latina está a la vanguardia del movimiento en favor de lugares de trabajo libres de humo de tabaco. Se han implementado leyes integrales de ambientes libres de humo en cuatro países, y en muchas ciudades, estados y provincias. Gracias a la implementación de estas políticas, más de 130 millones de personas en América Latina están ahora protegidas del humo de tabaco ajeno. Sin embargo, existen varios desafíos para un continuo progreso en la implementación de lugares de trabajo libres de humo de tabaco. A partir de una encuesta realizada con activistas y funcionarios gubernamentales de América Latina, se indentificaron los siguientes desafíos principales: necesidad de adoptar programas voluntarios en los lugares del trabajo cuando no exista legislación; legislación débil o falta de leyes nacionales integrales de ambientes libres de humo de tabaco; intentos de la industria tabacalera por dificultar

AC dielectrophoresis alignment of single-walled carbon nano tubes (SWNTS) and palladium nano wires for hydrogen gas sensor

International Nuclear Information System (INIS)

Nur Ubaidah Saidin; Nur Ubaidah Saidin; Ying, K.K.; KKhuan, N.I.; Mohammad Hafizuddin Jumali

2013-01-01

Full-text: Using AC electric field, nano wires or nano tubes can be aligned, chained or accelerated in a direction parallel to the applied field, oriented or concentrated onto designated locations as well as dispersed in controlled manner under high efficiencies. In this work, systematic study on the alignment of nano wires/ nano tubes across the 3 μm-gaps between pairs of micro fabricated gold electrodes was carried out using AC dielectrophoresis technique. Densities and alignment of the nano wires/ nano tubes across the gaps of the electrodes were controlled by the applied AC field strengths and frequencies on the electrodes. Good alignments of SWNTs and Pd nano wires were achieved at an applied frequency of 5 MHz and a field strength as high as 25 V pp for Pd nano wires compared to only 2 V pp for SWNTs. The aligned nano wires/ nano tubes will be functioned as sensor elements for hydrogen gas sensing. (author)

Nonlinear super-resolution nano-optics and applications

CERN Document Server

Wei, Jingsong

2015-01-01

This book covers many advances in the subjects of nano-optics and nano photonics. The author describes the principle and technical schematics of common methods for breaking through the optical diffraction limit and focuses on realizing optical super-resolution with nonlinear effects of thin film materials. The applications of nonlinear optical super-resolution effects in nano-data storage, nanolithography, and nano-imaging are also presented. This book is useful to graduate students majoring in optics and nano science and also serves as a reference book for academic researchers, engineers, technical professionals in the fields of super-resolution optics and laser techniques, nano-optics and nano photonics, nano-data storage, nano imaging, micro/nanofabrication and nanolithography and nonlinear optics.

Nano-ceramics and its molding technologies

International Nuclear Information System (INIS)

Liu Jian; Xu Yunshu

2007-01-01

Nano-ceramics and its related knowledge were introduced. Fabrication of nano-ceramic powder, as well as the molding and sintering technologies of nano-ceramics were reviewed. Features of the present molding technologies were analyzed. The applications of nano-ceramics were prospected. (authors)

Phosphorylated nano-diamond/ Polyimide Nanocomposites

International Nuclear Information System (INIS)

Beyler-Çiǧil, Asli; Çakmakçi, Emrah; Kahraman, Memet Vezir

2014-01-01

In this study, a novel route to synthesize polyimide (PI)/phosphorylated nanodiamond films with improved thermal and mechanical properties was developed. Surface phosphorylation of nano-diamond was performed in dichloromethane. Phosphorylation dramatically enhanced the thermal stability of nano-diamond. Poly(amic acid) (PAA), which is the precursor of PI, was successfully synthesized with 3,3',4,4'-Benzophenonetetracarboxylic dianhydride (BTDA) and 4,4'-oxydianiline (4,4'-ODA) in the solution of N,N- dimethylformamide (DMF). Pure BTDA-ODA polyimide films and phosphorylated nanodiamond containing BTDA-ODA PI films were prepared. The PAA displayed good compatibility with phosphorylated nano-diamond. The morphology of the polyimide (PI)/phosphorylated nano-diamond was characterized by scanning electron microscopy (SEM). Chemical structure of polyimide and polyimide (PI)/phosphorylated nano-diamond was characterized by FTIR. SEM and FTIR results showed that the phosphorylated nano-diamond was successfully prepared. Thermal properties of the polyimide (PI)/phosphorylated nanodiamond was characterized by thermogravimetric analysis (TGA). TGA results showed that the thermal stability of (PI)/phosphorylated nano-diamond film was increased

Movimiento podcaster: la nueva concreción de la radio libre

Directory of Open Access Journals (Sweden)

Francisco Godinez Galay

2015-06-01

Full Text Available El movimiento podcaster consiste en grupos de jóvenes que realizan sus programas de radio específicamente para el entorno digital. El aprovechamiento tecnológico se suma a las peculiaridades de la radio para asegurar su perdurabilidad bajo nuevas formas como el podcast. El podcast, por sus características, usos y necesidades encarna un eslabón más de la historia de la radio alternativa, libre e independiente, y es deudor de la cultura autogestionada y romántica del fanzine, por un lado, y del humor anecdótico del stand up y la sitcom, por el otro. Y es, a su vez, el espacio en donde se puede dar un paso superador y asegurar una relación comunicativa por sobre la concepción estrictamente informativa.

Green(ing) infrastructure

CSIR Research Space (South Africa)

Van Wyk, Llewellyn V

2014-03-01

Full Text Available the generation of electricity from renewable sources such as wind, water and solar. Grey infrastructure – In the context of storm water management, grey infrastructure can be thought of as the hard, engineered systems to capture and convey runoff..., pumps, and treatment plants.  Green infrastructure reduces energy demand by reducing the need to collect and transport storm water to a suitable discharge location. In addition, green infrastructure such as green roofs, street trees and increased...

Nano surface generation of grinding process using carbon nano tubes

Indian Academy of Sciences (India)

Nano surface finish has become an important parameter in the semiconductor, optical, electrical and mechanical industries. The materials used in these industries are classified as difficult to machine materials such as ceramics, glasses and silicon wafers. Machining of these materials up to nano accuracy is a great ...

Libertad negativa y libre desarrollo de la personalidad en la jurisprudencia constitucional colombiana: un análisis desde la perspectiva de John Stuart Mill y Thomas Hobbes

Directory of Open Access Journals (Sweden)

Carlos Alberto Jaramillo

2013-12-01

Full Text Available El presente trabajo pretende demostrar que la Corte Constitucional colombiana confunde la noción de libre desarrollo de la personalidad con la noción de libertad negativa, debido a que en el fondo de su argumentación subyace el pensamiento de Thomas Hobbes; situación distinta sería si la Corte fundamentara sus sentencias en el concepto de libertad, desarrollado por John Stuart Mill, quien estaría más acorde con la noción de libre desarrollo de la personalidad bajo los presupuestos de un Estado Social y Democrático de Derecho fundado en la dignidad humana.

Pharmaceutical Applications of Polymeric Nano materials

International Nuclear Information System (INIS)

Wu, L.; Sun, L.

2011-01-01

With significant attention focused on nano science and nano technology in recent years, nano materials have been used in a wide variety of applications such as automotive, environmental, energy, catalysis, biomedical, drug delivery, and polymeric industries. Among those fields, the application of nano materials with pharmaceutical science is an emerging and rapidly growing field and has drawn increasing attention recently. Research and development in this field is mainly focused on several aspects such as the discoveries of novel functional nano materials, exploration on nanoparticles with controlled and targeted drug delivery characteristics, and investigation of bio functionalized and diagnostic nano materials. In this special issue, we have invited a few papers related to recent advances in pharmaceutical application of polymeric nano materials

Preparation of re-usable photocatalytic filter for degradation of Malachite Green dye under UV and vis-irradiation

International Nuclear Information System (INIS)

Sayilkan, F.; Asiltuerk, M.; Tatar, P.; Kiraz, N.; Arpac, E.; Sayilkan, H.

2007-01-01

Sn 4+ doped and undoped nano-TiO 2 particles easily dispersed in water were synthesized without using organic solvent by hydrothermal process. Nanostructure-TiO 2 based thin films were prepared on flyswatter substrate, made with stainless steel, by dip-coating technique. The structure, surface and optical properties of the particles and thin films were characterized by element analysis and XRD, BET, SEM and UV/vis/NIR techniques. The photocatalytic performance of the films were tested for degradation of Malachite Green dye in solution under UV and vis-lights. The results showed that the coated flyswatter has a very high photocatalytic performance for the photodegradation of Malachite Green irradiated with UV and vis-lights. The results also proved that the hydrothermally synthesized nano-TiO 2 particles are fully anatase crystalline form and are easily dispersed in water, the coated surfaces are hydrophilic, and the doping of transition metal ion efficiently improved the degradation performance of TiO 2 -coated flyswatter. The photocatalytic performances determined at both irradiation conditions were very good and were almost similar to each other for Sn 4+ doped TiO 2 -coated flyswatter and it can be repeatedly used with increasing photocatalytic activity compared to undoped TiO 2 -coated flyswatter

Preparation of Ag@mSiO{sub 2} and Pt@mSiO{sub 2}nano composites using trioctylmethyl ammonium hydrogen phthalate (TOMAHP) ionic liquid as reaction medium

Energy Technology Data Exchange (ETDEWEB)

Biswas, Sujoy, E-mail: sujoyb@barc.gov.in [Chemical Engineering Group, Bhabha Atomic Research Centre, Mumbai 400085 (India); Dasgupta, Kinshuk [Materials Group, Bhabha Atomic Research Centre, Mumbai 400085 (India); Bahadur, Jitendra [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Tewari, Raghavendra [Materials Group, Bhabha Atomic Research Centre, Mumbai 400085 (India); Mazumder, Subhasish [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

2016-09-15

A novel one step green chemistry approach utilizing trioctylmethyl ammonium hydrogen phthalate (TOMAHP), task specific ionic liquid has been attempted for synthesis of Ag and Pt nanoparticles supported on silica (Ag@mSiO{sub 2} and Pt@mSiO{sub 2}). Structure, size distribution and morphology of these nano-composite particles were evaluated using X-ray diffraction (XRD), transmission electron microscopy (TEM), small angle neutron scattering (SANS) as well as small angle X-ray scattering (SAXS) techniques. The XRD results show that Ag/Pt metal nanoparticles deposited on to SiO{sub 2} surface are face center cubic (fcc) in nature. The TEM and SAXS/SANS results show the morphology and size distributions of Ag and Pt nanoparticles loaded on to the surface of SiO{sub 2}. It has been found that Ag nanoparticles are well dispersed on to the SiO{sub 2} surface and are quite monodisperse in size, whereas Pt nanoparticles are quite polydisperse in size and forms aggregate or chain like structure on SiO{sub 2} surface containing primary nanoparticles of typical size range 3–7 nm. The stability of nanoparticles, which controls its dispersion on SiO{sub 2} substrate, has been discussed. - Graphical abstract: Mechanism for Ag@mSiO{sub 2} and Pt@mSiO{sub 2} nano composites in TOMAHP ionic liquid medium. - Highlights: • Novel methods for preparation of Pt@SiO{sub 2} and Ag@SiO{sub 2} nano composite in functionalized ionic liquid. • Pt@SiO{sub 2} and Ag@SiO{sub 2} nano composite are characterized using XRD, TEM as well as small angle x-ray scattering techniques. • The sizes of nano composite is <10 nm in size. • The method is simple one step, green chemical reduction method to prepare SiO{sub 2} support nano catalyst.

Por los derechos humanos de las mujeres: la Ley General de Acceso de las Mujeres a una Vida Libre de Violencia

Directory of Open Access Journals (Sweden)

Marcela Lagarde y de los Ríos

2007-01-01

Full Text Available Este artículo analiza la Ley General de Acceso de las Mujeres a una Vida Libre de Violencia, misma que es considerada por la autora como un paradigma en el proceso de consolidación de los derechos humanos de las mujeres en México.

Nano structures for Medical Diagnostics Md

International Nuclear Information System (INIS)

Bellah, M.; Iqbal, S.M.; Bellah, M.; Iqbal, S.M.; Christensen, S.M.; Iqbal, S.M.; Iqbal, S.M.

2012-01-01

Nano technology is the art of manipulating materials on atomic or molecular scales especially to build nano scale structures and devices. The field is expanding quickly, and a lot of work is ongoing in the design, characterization, synthesis, and application of materials, structures, devices, and systems by controlling shape and size at nanometer scale. In the last few years, much work has been focused on the use of nano structures toward problems of biology and medicine. In this paper, we focus on the application of various nano structures and nano devices in clinical diagnostics and detection of important biological molecules. The discussion starts by introducing some basic techniques of micro-/nano scale fabrication that have enabled reproducible production of nano structures. The prospects, benefits, and limitations of using these novel techniques in the fields of bio detection and medical diagnostics are then discussed. Finally, the challenges of mass production and acceptance of nano technology by the medical community are considered.

Crónica: Un foro sobre el tratado de libre comercio con Estados Unidos: Aspectos jurídicos y económicos

Directory of Open Access Journals (Sweden)

Memoria Foro TLC con EEUU

2004-12-01

Full Text Available Durantes los días 18 y 19 de agosto de 2004 se realizó en la Universidad ICESI un foro sobre el Tratado de Libre Comercio con Estados Unidos y sus impactos sobre la normatividad jurídica colombiana.

Manipulation and functionalization of nano-tubes: application to boron nitride nano-tubes

International Nuclear Information System (INIS)

Maguer, A.

2007-01-01

This PhD work is divided into two parts dealing with boron nitride (BNNT) and carbon nano-tubes. The first part is about synthesis, purification and chemical functionalization of BNNT. Single-walled BNNT are synthesized by LASER ablation of a hBN target. Improving the synthesis parameters first allowed us to limit the byproducts (hBN, boric acid). A specific purification process was then developed in order to enrich the samples in nano-tubes. Purified samples were then used to develop two new chemical functionalization methods. They both involve chemical molecules that present a high affinity towards the BN network. The use of long chain-substituted quinuclidines and borazines actually allowed the solubilization of BNNT in organic media. Purification and functionalization were developed for single-walled BNNT and were successfully applied to multi-walled BNNT. Sensibility of boron to thermic neutrons finally gave birth to a study about covalent functionalization possibilities of the network. The second part of the PhD work deals with separation of carbon nano-tubes depending on their properties. Microwave irradiation of carbon nano-tubes first allowed the enrichment of initially polydisperse samples in large diameter nano-tubes. A second strategy involving selective interaction between one type of tubes and fullerene micelles was finally envisaged to selectively solubilize carbon nano-tubes with specific electronic properties. (author) [fr

Effect of TMAH Etching Duration on the Formation of Silicon Nano wire Transistor Patterned by AFM Nano lithography

International Nuclear Information System (INIS)

Hutagalung, S.D.; Lew, K.C.

2012-01-01

Atomic force microscopy (AFM) lithography was applied to produce nano scale pattern for silicon nano wire transistor fabrication. This technique takes advantage of imaging facility of AFM and the ability of probe movement controlling over the sample surface to create nano patterns. A conductive AFM tip was used to grow the silicon oxide nano patterns on silicon on insulator (SOI) wafer. The applied tip-sample voltage and writing speed were well controlled in order to form pre-designed silicon oxide nano wire transistor structures. The effect of tetra methyl ammonium hydroxide (TMAH) etching duration on the oxide covered silicon nano wire transistor structure has been investigated. A completed silicon nano wire transistor was obtained by removing the oxide layer via hydrofluoric acid etching process. The fabricated silicon nano wire transistor consists of a silicon nano wire that acts as a channel with source and drain pads. A lateral gate pad with a nano wire head was fabricated very close to the channel in the formation of transistor structures. (author)

Nano Fertilizers

Directory of Open Access Journals (Sweden)

Hatice DAĞHAN

2017-06-01

Full Text Available Agricultural land is decreasing day by day due to erosion, environmental pollution, unconscious irrigation and fertilization. On the other hand, it is necessary to increase agricultural production in order to meet the needs of the developing industry as well as the nutritional needs of the growing population. In the recent years, nano fertilizers have begun to be produced to obtain the highest amount and quality of production from the unit area. Previous research shows that nano fertilizers cause an increase in the use efficiency of plant nutrients, reduce soil toxicity, minimize the potential adverse effects of excessive chemical fertilizer use, and reduce fertilizer application frequency. Nano fertilizers are important in agriculture to increase crop yield and nutrient use efficiency, and to reduce excessive use ofchemical fertilizers. The most important properties of these fertilizers are that they contain one or more of macro and micronutrients, they can be applied frequently in small amounts and are environmentally friendly. However, when applied at high doses, they exhibit decreasing effects on plant growth and crop yields, similar to chemical fertilizers. In this review, the definition, importan ce, and classification of nano fertilizers, their application in plant production, advantages and disadvantages and the results obtained in this field were discussed.

Photocatalytic performance of Sn-doped TiO2 nanostructured thin films for photocatalytic degradation of malachite green dye under UV and VIS-lights

International Nuclear Information System (INIS)

Sayilkan, F.; Asiltuerk, M.; Tatar, P.; Kiraz, N.; Sener, S.; Arpac, E.; Sayilkan, H.

2008-01-01

Sn-doped and undoped nano-TiO 2 particles have been synthesized by hydrotermal process without acid catalyst at 225 deg. C in 1 h. Nanostructure-TiO 2 based thin films, contain at different solid ratio of TiO 2 in coating, have been prepared on glass surfaces by spin-coating technique. The structure, surface morphology and optical properties of the thin films and the particles have been investigated by element analysis and XRD, BET and UV/VIS/NIR techniques. The photocatalytic performance of the films was tested for degradation of malachite green dye in solution under UV and VIS-lights. The results showed that the hydrothermally synthesized nano-TiO 2 particles are fully anatase crystalline form and are easily dispersed in water, the coated surfaces have nearly super-hydrophilic properties and, the doping of transition metal ion efficiently improved the photocatalytic performance of the TiO 2 thin film. The results also proved that malachite green is decomposed catalytically due to the pseudo first-order reaction kinetics

Plant virus-resembling optical nano-materials conjugated with anti-EGFR for targeted cancer imaging

Science.gov (United States)

Gupta, Sharad; Wilder, Hailey; Rao, A. L. N.; Vullev, V. I.; Anvari, Bahman

2012-03-01

We recently reported the construction of a new type of optically active nano-particles composed of genome-depleted plant infecting brome mosaic virus (BMV) doped with indocyanine green (ICG), an FDA-approved chromophore . We refer to these constructs as optical viral ghosts (OVGs) since only the capsid protein (CP) subunits of BMV remain to encapsulate ICG. Herein, we covalently conjugated the surface of OVGs with anti-epidermal growth factor receptors (anti-EGFR) to target cancerous human bronchial epithelial cells (C-HBECs) in-vitro. Our preliminary results demonstrate the utility of conjugated OVGs for targeted imaging of cancer cells.

Carbon nanotubes: from nano test tube to nano-reactor.

Science.gov (United States)

Khlobystov, Andrei N

2011-12-27

Confinement of molecules and atoms inside carbon nanotubes provides a powerful strategy for studying structures and chemical properties of individual molecules at the nanoscale. In this issue of ACS Nano, Allen et al. explore the nanotube as a template leading to the formation of unusual supramolecular and covalent structures. The potential of carbon nanotubes as reactors for synthesis on the nano- and macroscales is discussed in light of recent studies.

El proceso de negociación del Tratado de Libre Comercio entre Colombia y Estados Unidos

OpenAIRE

Cadena Cancino, Adriana Rocío

2008-01-01

La presente investigación analiza la negociación del Tratado de Libre Comercio entre Colombia y Estados Unidos como policy process, lo que condujo a reconstruir la etapa de formación de agenda de la política en cuestión, a identificar las acciones que llevaron a cabo los actores involucrados (particularmente el poder ejecutivo del Estado colombiano, los legisladores, los negociadores, los sindicatos, los grupos de la sociedad civil y los empresarios), así como las estrategias empleadas en la ...

[The scientific works of the teachers of human anatomy in the "Université Libre de Bruxelles" (ULB)].

Science.gov (United States)

Louryan, S

2014-06-01

The "Université Libre de Bruxelles" was founded in 1834. Between this year and 1904, the teachers of human anatomy were essentially clinicians and surgeons. Their works were mainly practical. Until 1904 (arrival of Albert Brachet) since present, the researches of the anatomical laboratory were devoted to embryology, and included the beginning of causal embryology. More recently, biomechanics appeared in the field of activity of the laboratory. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Situación actual de estándares e.Learning y aplicación en entornos de Software Libre

Directory of Open Access Journals (Sweden)

Juan Lago Cabrera

2006-12-01

Full Text Available Esta monografía trata de presentar un breve informe de situación de los estándares e.Learning con especial mención a SCORM, estándar "de facto" que está cobrando bastante importancia en los últimos años. Entre los objetivos que se persiguen con estos estándares, está la reutilización de contenidos de aprendizaje con independencia de la tecnología de las herramientas que los generan (herramientas de autor y los usan (plataformas e.Learning. Son muchas las empresas, instituciones y organizaciones educativas que están adoptando SCORM, pero es interesante ver cómo también la comunidad de Software Libre ha sabido adaptarse a la evolución de estos estándares, pudiéndose encontrar en Internet multitud de herramientas que los soportan. Como ejemplo práctico, se verá cómo integrar un contenido SCORM dentro de una plataforma LMS de Software Libre como Moodle así como una breve descripción de algunas herramientas de autor que se pueden encontrar en la Web.

Situación actual de estándares e.Learning y aplicación en entornos de Software Libre

Directory of Open Access Journals (Sweden)

Juan Lago Cabrera

Full Text Available Esta monografía trata de presentar un breve informe de situación de los estándares e.Learning con especial mención a SCORM, estándar "de facto" que está cobrando bastante importancia en los últimos años. Entre los objetivos que se persiguen con estos estándares, está la reutilización de contenidos de aprendizaje con independencia de la tecnología de las herramientas que los generan (herramientas de autor y los usan (plataformas e.Learning. Son muchas las empresas, instituciones y organizaciones educativas que están adoptando SCORM, pero es interesante ver cómo también la comunidad de Software Libre ha sabido adaptarse a la evolución de estos estándares, pudiéndose encontrar en Internet multitud de herramientas que los soportan. Como ejemplo práctico, se verá cómo integrar un contenido SCORM dentro de una plataforma LMS de Software Libre como Moodle así como una breve descripción de algunas herramientas de autor que se pueden encontrar en la Web.

Quantum information aspects on bulk and nano interacting Fermi system: A spin-space density matrix approach

Energy Technology Data Exchange (ETDEWEB)

Afzali, R., E-mail: afzali@kntu.ac.ir [Department of Physics, K. N. Toosi University of Technology, Tehran, 15418 (Iran, Islamic Republic of); Ebrahimian, N., E-mail: n.ebrahimian@shahed.ac.ir [Department of Physics, Faculty of Basic Sciences, Shahed University, Tehran, 18155-159 (Iran, Islamic Republic of); Eghbalifar, B., E-mail: b.eghbali2011@yahoo.com [Department of Agricultural Management, Marvdasht Branch, Azad University, Marvdasht (Iran, Islamic Republic of)

2016-10-07

Highlights: • In contrast to a s-wave superconductor, the quantum correlation of the d-wave superconductor is sensitive to the change of the gap magnitude. • Quantum discord of the d-wave superconductor oscillates. • Quantum discord becomes zero at a characteristic length of the d-wave superconductor. • Quantum correlation strongly depends on the length of grain. Length of the superconductor lower, the quantum correlation length higher. • Quantum tripartite entanglement for a nano-scale d-wave superconductor is better than for a bulk d-wave superconductor. - Abstract: By approximating the energy gap, entering nano-size effect via gap fluctuation and calculating the Green's functions and the space-spin density matrix, the dependence of quantum correlation (entanglement, discord and tripartite entanglement) on the relative distance of two electron spins forming Cooper pairs, the energy gap and the length of bulk and nano interacting Fermi system (a nodal d-wave superconductor) is determined. In contrast to a s-wave superconductor, quantum correlation of the system is sensitive to the change of the gap magnitude and strongly depends on the length of the grain. Also, quantum discord oscillates. Furthermore, the entanglement length and the correlation length are investigated. Discord becomes zero at a characteristic length of the d-wave superconductor.

The role of nano-contacts in electrical transport through a molecular wire

International Nuclear Information System (INIS)

Shokri, Ali A.; Mardaani, M.

2006-01-01

Theoretical studies on electrical transport in a nano-device which consisting of two semi-infinite cubic leads with finite cross-sections separated by a typical molecular wire (MW) are carried out by including the effect of single and multiple contacts. The calculations are based on the tight-binding model and Green's function method in the coherent regime. In order to calculate the effect of contact coupling on molecular wire transport, we derive a theoretical formula based on the nearest and next nearest neighbor coupling strengths between the MW and the surface atoms in the simple cubic leads. This approach can be generalized to other leads with different lattice structure. The results show small changes in the transport properties with changing next nearest neighbor coupling strength. Some asymmetry is noted in the strong multiple contact limit. Also, we observe that with enlarging the cross-section size of leads, the current density increases and then leads to the quantum unit of conductance. Hence, our derived formalism can be used for devices attached to macroscopic surfaces. The theoretical results obtained, can be a base for developments in designing nano-electronic devices

Nano-cellulose biopolymer based nano-biofilm biomaterial using plant biomass: An innovative plant biomaterial dataset

Directory of Open Access Journals (Sweden)

A.B.M. Sharif hossain

2018-04-01

Full Text Available The nano-cellulose derived nano-biofilm keeps a magnificent role in medical, biomedical, bioengineering and pharmaceutical industries. Plant biomaterial is naturally organic and biodegradable. This study has been highlighted as one of the strategy introducing biomass based nano-bioplastic (nanobiofilm to solve dependency on petroleum and environment pollution because of non-degradable plastic. The data study was carried out to investigate the nano-biopolymer (nanocellulose based nano-biofilm data from corn leaf biomass coming after bioprocess technology without chemicals. Corn leaf biomass was used to produce biodegradable nano-bioplastic for medical and biomedical and other industrial uses. Data on water absorption, odor, pH, cellulose content, shape and firmness, color coating and tensile strength test have been exhibited under standardization of ASTM (American standard for testing and materials. Moreover, the chemical elements of nanobiofilm like K+, CO3−−, Cl−, Na+ showed standard data using the EN (166. Keywords: Nanocellulose, Nanobiofilm, Nanobioplastic, Biodegradable, Corn leaf

Customers’ Intention to Use Green Products: the Impact of Green Brand Dimensions and Green Perceived Value

Directory of Open Access Journals (Sweden)

Doszhanov Aibek

2015-01-01

Full Text Available This study aimed to identify the relationships between green brand dimension (green brand awareness, green brand image, and green brand trust, green perceived value and customer’s intention to use green products. Data was collected through structured survey questionnaire from 384 customers of three hypermarkets in Kuala-Lumpur. Data was analyzed based on multiple regression analysis. The results indicate that there are significant relationships between green brand awareness, green brand trust, green perceived value, and customer’s intention to use green products. However, green brand image was not found to have significant relationship with customer’s intention to use green products. The discussion presented suggestions for marketers and researchers interested in green branding.

Nano-structural characteristics and optical properties of silver chiral nano-flower sculptured thin films

International Nuclear Information System (INIS)

Savaloni, Hadi; Haydari-Nasab, Fatemh; Malmir, Mariam

2011-01-01

Silver chiral nano-flowers with 3-, 4- and 5-fold symmetry were produced using oblique angle deposition method in conjunction with the rotation of sample holder with different speeds at different sectors of each revolution corresponding to symmetry order of the acquired nano-flower. Atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM), were employed to obtain morphology and nano-structure of the films. Optical characteristics of silver chiral nano-flower thin films were obtained using single beam spectrophotometer with both s- and p-polarization incident light at 30 o and 70 o incidence angles and at different azimuthal angles (φ). Optical spectra showed both TM (TDM (transverse dipole mode) and TQM (transverse quadruple mode)) and LM (longitudinal mode) Plasmon resonance peaks. For 3- and 4-fold symmetry chiral nano-flowers the s-polarization extinction spectra obtained at different azimuthal angles did not show significant change in the Plasmon peak position while 5-fold symmetry chiral nano-flower showed a completely different behavior, which may be the result of increased surface anisotropy, so when the φ angle is changed the s-polarization response from the surface can change more significantly than that for lower symmetries. In general, for 3-, 4- and 5-fold symmetry chiral nano-flowers a sharp peak at lower wavelengths ( o incidence angle.

El cine de Alejandro Casona y el fantasma de la Institución Libre de Enseñanza

Directory of Open Access Journals (Sweden)

Díez Puertas, Emeterio

2015-12-01

Full Text Available The Spanish playwright Alejandro Casona written during his exile in Argentina nearly twenty films, original scripts and adaptations. Very few can be seen in Spain. Censorship Franco believes that they are signed by an intellectual who defends, as he made clear Nuestra Natacha, the ideas of the Institución Libre de Enseñanza (Free Institute of Education: secularism, Freemasonry, coeducation, women’s liberation... The few titles projected in Spanish cinemas suffer cuts, long periods of quarantine or the censorship gives permission because, in a time of international isolation, is a sign of tolerance.El dramaturgo español Alejandro Casona escribe durante su exilio en Argentina una veintena de películas, entre guiones originales y adaptaciones. Muy pocas pueden verse en España. La censura franquista considera que están firmadas por un intelectual que representa, como había dejado patente Nuestra Natacha, las ideas de la Institución Libre de Enseñanza: laicismo, masonería, coeducación, liberación de la mujer... Los pocos títulos que llegan a las salas españolas sufren cortes, largos periodos de cuarentena o se aprueban porque, en cierto momento de aislamiento internacional, sirven para dar una imagen de tolerancia.

Challenges for Super-Resolution Localization Microscopy and Biomolecular Fluorescent Nano-Probing in Cancer Research

Science.gov (United States)

Ilić, Nataša; Pilarczyk, Götz; Lee, Jin-Ho; Logeswaran, Abiramy; Borroni, Aurora Paola; Krufczik, Matthias; Theda, Franziska; Waltrich, Nadine; Bestvater, Felix; Hildenbrand, Georg; Cremer, Christoph; Blank, Michael

2017-01-01

Understanding molecular interactions and regulatory mechanisms in tumor initiation, progression, and treatment response are key requirements towards advanced cancer diagnosis and novel treatment procedures in personalized medicine. Beyond decoding the gene expression, malfunctioning and cancer-related epigenetic pathways, investigations of the spatial receptor arrangements in membranes and genome organization in cell nuclei, on the nano-scale, contribute to elucidating complex molecular mechanisms in cells and tissues. By these means, the correlation between cell function and spatial organization of molecules or molecular complexes can be studied, with respect to carcinogenesis, tumor sensitivity or tumor resistance to anticancer therapies, like radiation or antibody treatment. Here, we present several new applications for bio-molecular nano-probes and super-resolution, laser fluorescence localization microscopy and their potential in life sciences, especially in biomedical and cancer research. By means of a tool-box of fluorescent antibodies, green fluorescent protein (GFP) tagging, or specific oligonucleotides, we present tumor relevant re-arrangements of Erb-receptors in membranes, spatial organization of Smad specific ubiquitin protein ligase 2 (Smurf2) in the cytosol, tumor cell characteristic heterochromatin organization, and molecular re-arrangements induced by radiation or antibody treatment. The main purpose of this article is to demonstrate how nano-scaled distance measurements between bio-molecules, tagged by appropriate nano-probes, can be applied to elucidate structures and conformations of molecular complexes which are characteristic of tumorigenesis and treatment responses. These applications open new avenues towards a better interpretation of the spatial organization and treatment responses of functionally relevant molecules, at the single cell level, in normal and cancer cells, offering new potentials for individualized medicine. PMID:28956810

Challenges for Super-Resolution Localization Microscopy and Biomolecular Fluorescent Nano-Probing in Cancer Research

Directory of Open Access Journals (Sweden)

Michael Hausmann

2017-09-01

Full Text Available Understanding molecular interactions and regulatory mechanisms in tumor initiation, progression, and treatment response are key requirements towards advanced cancer diagnosis and novel treatment procedures in personalized medicine. Beyond decoding the gene expression, malfunctioning and cancer-related epigenetic pathways, investigations of the spatial receptor arrangements in membranes and genome organization in cell nuclei, on the nano-scale, contribute to elucidating complex molecular mechanisms in cells and tissues. By these means, the correlation between cell function and spatial organization of molecules or molecular complexes can be studied, with respect to carcinogenesis, tumor sensitivity or tumor resistance to anticancer therapies, like radiation or antibody treatment. Here, we present several new applications for bio-molecular nano-probes and super-resolution, laser fluorescence localization microscopy and their potential in life sciences, especially in biomedical and cancer research. By means of a tool-box of fluorescent antibodies, green fluorescent protein (GFP tagging, or specific oligonucleotides, we present tumor relevant re-arrangements of Erb-receptors in membranes, spatial organization of Smad specific ubiquitin protein ligase 2 (Smurf2 in the cytosol, tumor cell characteristic heterochromatin organization, and molecular re-arrangements induced by radiation or antibody treatment. The main purpose of this article is to demonstrate how nano-scaled distance measurements between bio-molecules, tagged by appropriate nano-probes, can be applied to elucidate structures and conformations of molecular complexes which are characteristic of tumorigenesis and treatment responses. These applications open new avenues towards a better interpretation of the spatial organization and treatment responses of functionally relevant molecules, at the single cell level, in normal and cancer cells, offering new potentials for individualized medicine.

Adaptando el baloncesto al niño de 12-13 años: análisis observacional del lanzamiento de tiro libre

Directory of Open Access Journals (Sweden)

Belén Garzón Echevarría

2012-06-01

Full Text Available En la competición organizada por la Federación Riojana de Baloncesto, el jugador pasa de practicar en la categoría alevín la modalidad de minibasket, a jugar en la categoría infantil un baloncesto adulto –con el mismo balón, terreno de juego y altura de la canasta que lo hacen actualmente en la ACB–. Con este trabajo se pretende, a partir del estudio del tiro libre de los integrantes de la selección riojana masculina de minibasket alevín, adaptar el baloncesto a las características propias del niño de 12-13 años, en contra de la tendencia hegemónica actual de adaptar el niño al baloncesto de los adultos. La investigación sigue una metodología cuasi-experimental y observacional, que en este caso son complementarias, si bien la metodología observacional predomina, lo que justifica el diseño observacional realizado; a través del cual se ha analizado la ejecución técnica del tiro libre en la modalidad alevín, en la infantil y en las cinco situaciones que resultan de combinar: canasta infantil (3,05 metros y balón alevín (n.º 5, canasta infantil (3,05 m y balón intermedio (n.º 6, canasta intermedia (2,80 m y balón alevín (n.º 5, canasta intermedia (2,80 m y balón intermedio (n.º 6, y canasta intermedia (2,80 m y balón infantil (n.º 7. En este sentido, para satisfacer los objetivos del estudio, se han realizado dos tipos de análisis: uno estadístico descriptivo e inferencial –mediante el programa SPSS, versión 15.0–, y otro en busca de patrones temporales –mediante el programa Theme, versión 5.0–. El trabajo de investigación concluye que todos los participantes mantienen una ejecución técnica del tiro libre alevín estable. Además, de las modalidades sometidas a estudio, la ejecución correspondiente a los tiros libre alevines es la que más se acerca al gesto técnico ideal, mientras que la situación infantil es aquella cuya ejecución de los tiros libres se aleja más del modelo técnico correcto

The Influence of Proactive Green Innovation and Reactive Green Innovation on Green Product Development Performance: The Mediation Role of Green Creativity

OpenAIRE

Yu-Shan Chen; Tai-Wei Chang; Chun-Yu Lin; Pi-Yu Lai; Kuan-Hung Wang

2016-01-01

This study fills the research gap in the exploration of the relationships between both proactive and reactive green innovations and green product development performance, and examines the mediating effect of green creativity. Structural equation modeling (SEM) is utilized to test the hypotheses. From the sample of 146 valid respondents, the results show that proactive green innovation positively affects green creativity and green product development performance, and green creativity positivel...

PAQUETE TECNOLÓGICO PARA EL MONITOREO AMBIENTAL EN INVERNADEROS CON EL USO DE HARDWARE Y SOFTWARE LIBRE

Directory of Open Access Journals (Sweden)

Oziel Lugo Espinosa

2014-01-01

Full Text Available El monitoreo ambiental en invernaderos, en particular en México, representa un alto costo de inversión para su adopción, por lo que en ocasiones, el productor opta por omitir esta infraestructura tecnológica. Esta condición suprime las ventajas del monitoreo y control climático del invernadero, lo cual repercute en la cantidad y calidad de la producción. En el presente trabajo se presenta el desarrollo de un paquete tecnológico de bajo costo para el monitoreo ambiental de invernaderos. El paquete se basa en el uso de software y hardware libres y considera la construcción y adaptación de sensores para medir las variables climatológicas dentro y fuera de un invernadero, la construcción y adaptación de interfaces electrónicas para capturar los valores de los sensores y el desarrollo de software para la interpretación de los datos. Como plataformas de software y hardware libres se utilizaron Java y Arduino, respectivamente. Se comparó los sensores desarrollados contra sensores comerciales en condiciones climatológicas iguales y se obtuvo los mismos datos con una diferencia notable en el tiempo de reacción de los sensores desarrollados debido al mayor peso por los materiales utilizados en su construcción.

Aligned Layers of Silver Nano-Fibers

Directory of Open Access Journals (Sweden)

Andrii B. Golovin

2012-02-01

Full Text Available We describe a new dichroic polarizers made by ordering silver nano-fibers to aligned layers. The aligned layers consist of nano-fibers and self-assembled molecular aggregates of lyotropic liquid crystals. Unidirectional alignment of the layers is achieved by means of mechanical shearing. Aligned layers of silver nano-fibers are partially transparent to a linearly polarized electromagnetic radiation. The unidirectional alignment and density of the silver nano-fibers determine degree of polarization of transmitted light. The aligned layers of silver nano-fibers might be used in optics, microwave applications, and organic electronics.

Self-aligned periodic Ni nano dots embedded in nano-oxide layer

International Nuclear Information System (INIS)

Doi, M.; Izumi, M.; Kawasaki, S.; Miyake, K.; Sahashi, M.

2007-01-01

The Ni nano constriction dots embedded in the Ta-nano-oxide layer (NOL) was prepared by the ion beam sputtering (IBS) method. After the various conditions of the oxidations, the structural analyses of the NOL were performed by RHEED, AES and in situ STM/AFM observations. From the current image of the conductive AFM for NOL, the periodically aligned metallic dots with the size around 5-10 nm were successfully observed. The mechanism of the formation of the self-organized aligned Ni nano constriction dots is discussed from the standpoint of the grain size, the crystal orientation, the preferred oxidation of Ta at the diffused interface

Review on Nano SeleniumProduced by Bacteria

Directory of Open Access Journals (Sweden)

LI Ji-xiang

2014-12-01

Full Text Available Selenium (Se is a kind of essential trace element for people and animal, while ionic state of selenium is toxic with high concentrations and will cause the selenium pollution. Nano-selenium is stable, nontoxic with higher biological activity. Application of bacteria reducing selenite or selenate to biological nano-selenium has great potential in selenium pollution control and nano-selenium production. This review summarizes the research progress of the red elemental nano-selenium reduced by bacteria including characteristics and application of nano-selenium, effects of carbon and nitrogen source, oxygen, temperature and pH in bacteria nano-selenium production, and molecular mechanisms of nano-selenium reduced by bacteria.

Characterization of Black and Green Tea from Local Market

Directory of Open Access Journals (Sweden)

Sonia Ancuta Socaci

2013-11-01

Full Text Available The leaves from Camellia sinensis are used from ancient times for preparation of tea but also as raw material for different extracts which are used in food industry as well as in pharmaceutical or cosmetic products. Due to the increasing interest in tea health benefits, the aim of the present study was to characterize several brands of green and black tea found on local market, regarding their content in total phenolic compounds, flavonoids and antioxidant capacity. Total phenolics and flavonoids were determined spectrophotometrically using a modified Folin-Ciocalteu method, respectively a chromogenic system of NaNO2–Al(NO33–NaOH based method. The antioxidant capacity of each tea sample was assessed through the evaluation of free radical scavenging effect on 2,2-diphenyl-1-picrylhydrazyl. The results obtained for the green and black tea samples varied widely, depending on the tea variety. The antioxidant capacity of the analyzed teas ranged between 12.10 and 40.03%RSA, while the total phenolic content was within 2090 and 6080 mg GA/ 100g. The concentrantion in flavonoids was between 9.04 and 15.34 g/100g of tea.

NanoRiskCat: a conceptual tool for categorization and communication of exposure potentials and hazards of nanomaterials in consumer products

Science.gov (United States)

Hansen, Steffen Foss; Jensen, Keld Alstrup; Baun, Anders

2014-01-01

The literature on nano(eco)toxicology is growing rapidly and has become increasingly difficult to interpret. We have developed a systematic tool called NanoRiskCat that can support companies and regulators in their first-tier assessment and communication on what they know about the hazard and exposure potential of consumer products containing engineered nanomaterials. The final outcome of NanoRiskCat is communicated in the form of a short-title describing the intended use and five colored dots. The first three dots refer to the qualitative exposure potential for professional end-users, consumers and the environment, whereas the last two refers to the hazard potential for humans and the environment. Each dot can be assigned one of four different colors, i.e. red, yellow, green, and gray indicating high, medium, low, and unknown, respectively. In this paper, we first introduce the criteria used to evaluate the exposure potential and the human and environmental hazards of specific uses of the nanoproduct. We then apply NanoRiskCat to eight different nanoproducts. The human and environmental exposure potential was found to be high (i.e., red) for many of the products due to direct application on skin and subsequent environmental release. In the NanoRiskCat evaluation, many of the nanomaterials achieve a red human and environmental hazard profile as there is compelling in vivo evidence to associate them with irreversible effects, e.g., carcinogenicity, respiratory, and cardiovascular effects, etc., in laboratory animals. A significant strength of NanoRiskCat is that it can be used even in cases where lack of data is prominent.

Metal Oxide Nano structures: Synthesis, Properties, and Applications

International Nuclear Information System (INIS)

Xu, L. H.; Patil, D. S.; Yang, J.; Xiao, J.

2015-01-01

In recent years, nano structured materials have attracted wide attention due to their fascinating optical and electrical properties, which make these materials potentially suitable for applications in electronics, optics, photonics, and sensors. Some metal oxides show a wide variety of morphologies such as nano wires, nano rods, nano tubes, nano rings, and nano belts. Synthesis and investigation of these metal-oxide nano structures are beneficial not only for understanding the fundamental phenomena in low dimensional systems, but also for developing new-generation nano devices with high performance.

Nano-JASMINE Data Analysis and Publication

Science.gov (United States)

Yamada, Y.; Hara, T.; Yoshioka, S.; Kobayashi, Y.; Gouda, N.; Miyashita, H.; Hatsutori, Y.; Lammers, U.; Michalik, D.

2012-09-01

The core data reduction for the Nano-JASMINE mission is planned to be done with Gaia's Astrometric Global Iterative Solution (AGIS). A collaboration between the Gaia AGIS and Nano-JASMINE teams on the Nano-JASMINE data reduction started in 2007. The Nano-JASMINE team writes codes to generate AGIS input, and this is called Initial Data Treament (IDT). Identification of observed stars and their observed field of view, getting color index, are different from those of Gaia because Nano-JASMINE is ultra small satellite. For converting centroiding results on detector to the celestial sphere, orbit and attitude data of the satellite are used. In Nano-JASMINE, orbit information is derived from on board GPS data and attitude is processed from on-board star sensor data and on-ground Kalman filtering. We also show the Nano-JASMINE goals, status of the data publications and utilizations, and introduce the next Japanese space astrometric mission.

Metaphysical green

DEFF Research Database (Denmark)

Earon, Ofri

2011-01-01

to adapt to urban environment. It explores the potential of Sensation of Green in the city. The paper questions whether the Sensation of Green could introduce a new spectrum of greens, beside the real green. It develops the term of metaphysical green – does green have to be green or can it be only...

Frontiers in nano-therapeutics

CERN Document Server

Tasnim, Nishat; Sai Krishna, Katla; Kalagara, Sudhakar; Narayan, Mahesh; Noveron, Juan C; Joddar, Binata

2017-01-01

This brief highlights recent research advances in the area of nano-therapeutics. Nanotechnology holds immense potential for application in a wide range of biological and engineering applications such as molecular sensors for disease diagnosis, therapeutic agents for the treatment of diseases, a vehicle for delivering therapeutics and imaging agents for theranostic applications, both in-vitro and in-vivo. The brief is grouped into the following sections namely, A) Discrete Nanosystems ; B) Anisotropic Nanoparticles; C) Nano-films/coated/layered and D) Nano-composites.

Lo peculiar de los seres humanos no es la razón, sino la voluntad libre

OpenAIRE

PASCUAL F. MARTÍNEZ-FREIRE

2015-01-01

Mi tesis es que los seres humanos son agentes racionales pero no pueden ser definidos como los agentes racionales. Las ciencias cognitivas (psicología y neurociencia, y también la inteligencia artificial) nos dicen que algunos animales y algunas máquinas son asimismo agentes racionales. En mi opinión el rasgo más característico de mujeres y hombres no es su dimensión racional sino su dimensión volicional, es decir, su aspecto de ser agentes libres. Es precisamente en este aspecto volicional d...

Análisis comparativo del sector agropecuario colombiano frente al tratado de libre comercio con Chile

OpenAIRE

Eslava Ardila, Paula

2014-01-01

El presente trabajo es un análisis comparativo entre el sector agropecuario de Colombia frente al de Chile, en el marco del Tratado de Libre Comercio, con el objetivo de evaluar los productos potenciales de exportación del sector colombiano, y de esta manera aprovechar los recursos y las ventajas competitivas en oportunidades de progreso. Para el desarrollo del análisis, se describe cada uno de los países en términos económicos con variables como: PIB, PIB per cápita, Balanza Comercial, gr...

Porous Nano-Si/Carbon Derived from Zeolitic Imidazolate Frameworks@Nano-Si as Anode Materials for Lithium-Ion Batteries

International Nuclear Information System (INIS)

Song, Yonghai; Zuo, Li; Chen, Shouhui; Wu, Jiafeng; Hou, Haoqing; Wang, Li

2015-01-01

Graphical abstract: Display Omitted -- Highlights: •The porous cage-like carbon/Si nanocomposites were synthesized based on nano-Si@ZIF-8-templatedmethod. •The nano-Si was uniformly embedded in porous amorphous carbon matrices. •The porous dodecahedral carbon framework effectively accommodates the volume variation of Si during the discharge/charge process. •The Si/C nanocomposites exhibit superior reversible capacity of 1168 mA h g −1 after 100 cycles. -- Abstract: Novel porous cage-like carbon (C)/nano-Si nanocomposites as anode materials for lithium-ion batteries (LIBs) was prepared based on nano-Si@zeolitic imidazolate frameworks (ZIF-8)-templated method. In this strategy, p-aminobenzoic acid was initially grafted onto nano-Si to form benzoic acid-functionalized nano-Si, and then nano-Si@ZIF-8 was constructed by alternately growing Zn(NO 3 ) 2 ·6H 2 O and 2-methylimidazolate on benzoic acid-functionalized nano-Si under ultrasound. The novel porous cage-like nano-Si/C nanocomposites were fabricated by pyrolyzing the resulted nano-Si@ZIF-8 and washing with HCl to remove off ZnO. Scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, Raman spectra and N 2 adsorption/desorption isotherms were employed to characterize the porous cage-like nano-Si/C nanocomposites. The resulted nano-Si/C nanocomposites as anode materials for LIBs showed a high reversible capacity of ∼1168 mA h g −1 at 100 mA g −1 after 100 cycles, which was higher than many previously reported Si/C nanocomposites. The porous nanostructure, high specific surface area and good electrical conductivity of the cage-like nano-Si/C nanocomposites contributed together to the good performance for LIBs. It might open up a new way for application of silicon materials

Applications of Nano palm oil fuel ash and Nano fly ash in concrete

Science.gov (United States)

Hamada, Hussein M.; Jokhio, Gul Ahmed; Mat Yahaya, Fadzil; Humada, Ali M.

2018-04-01

This paper discusses the applications of Nano waste materials including palm oil fuel ash and fly ash in the concrete production. The implementation of nanotechnology has been instrumental in the development of significant interest among the stakeholders to improve the mechanical and chemical properties of materials involved in the production of concrete. Although many researchers have shown the potential of nanomaterials to increase strength and durability of concrete and improve its physical and chemical properties, there is still a knowledge gap regarding the preparation of Nano waste materials from agricultural waste to use as cement replacement instead of non-renewable materials. Therefore, it should be focused on to study Nano- waste materials to benefit from these characteristics during preparation of concrete mixtures. Therefore, this paper highlights the potential of waste materials in the Nano size to partially replace cement in concrete and achieve the same or better result than the traditional concrete. This paper recommends to conduct further experimental works to improve the concrete material properties by investigating the properties of waste materials in Nano size.

Probabilistic environmental risk assessment of five nanomaterials (nano-TiO2, nano-Ag, nano-ZnO, CNT, and fullerenes).

Science.gov (United States)

Coll, Claudia; Notter, Dominic; Gottschalk, Fadri; Sun, Tianyin; Som, Claudia; Nowack, Bernd

2016-01-01

The environmental risks of five engineered nanomaterials (nano-TiO2, nano-Ag, nano-ZnO, CNT, and fullerenes) were quantified in water, soils, and sediments using probabilistic Species Sensitivity Distributions (pSSDs) and probabilistic predicted environmental concentrations (PECs). For water and soil, enough ecotoxicological endpoints were found for a full risk characterization (between 17 and 73 data points per nanomaterial for water and between 4 and 20 for soil) whereas for sediments, the data availability was not sufficient. Predicted No Effect Concentrations (PNECs) were obtained from the pSSD and used to calculate risk characterization ratios (PEC/PNEC). For most materials and environmental compartments, exposure and effect concentrations were separated by several orders of magnitude. Nano-ZnO in freshwaters and nano-TiO2 in soils were the combinations where the risk characterization ratio was closest to one, meaning that these are compartment/ENM combinations to be studied in more depth with the highest priority. The probabilistic risk quantification allows us to consider the large variability of observed effects in different ecotoxicological studies and the uncertainty in modeled exposure concentrations. The risk characterization results presented in this work allows for a more focused investigation of environmental risks of nanomaterials by consideration of material/compartment combinations where the highest probability for effects with predicted environmental concentrations is likely.

NanoChemistry Group at DTU uses NanoSight's NTA System for Nanoparticle Characterization

DEFF Research Database (Denmark)

2011-01-01

(Nanowerk News) NanoSight, leading manufacturers of unique nanoparticle characterization technology, describes how the Nano Chemistry group at DTU Copenhagen is utilizing nanoparticle tracking analysis, NTA, in its research and teaching programs....

Rapid fabrication of an ordered nano-dot array by the combination of nano-plastic forming and annealing methods

International Nuclear Information System (INIS)

Yoshino, Masahiko; Ohsawa, Hiroki; Yamanaka, Akinori

2011-01-01

In this paper, a new fabrication method for an ordered nano-dot array is developed. Combination of coating, nano-plastic forming and annealing processes is studied to produce uniformly sized and ordered gold nano-dot array on a quartz glass substrate. The experimental results reveal that patterning of a groove grid on the gold-coated substrate with NPF is effective to obtain the ordered gold nano-dot array. In the proposed fabrication process, the size of the gold nano-dot can be controlled by adjusting the groove grid size. A minimum gold nano-dot array fabricated on a quartz-glass substrate was 93 nm in diameter and 100 nm in pitch. Furthermore, the mechanism of nano-dot array generation by the presented process is investigated. Using a theoretical model it is revealed that the proposed method is capable of fabrication of smaller nano-dots than 10 nm by controlling process conditions adequately.

The effect of brushing with nano calcium carbonate and calcium carbonate toothpaste on the surface roughness of nano-ionomer

Science.gov (United States)

Anisja, D. H.; Indrani, D. J.; Herda, E.

2017-08-01

Nanotechnology developments in dentistry have resulted in the development of nano-ionomer, a new restorative material. The surface roughness of restorative materials can increase bacteria adhesion and lead to poor oral hygiene. Abrasive agents in toothpaste can alter tooth and restorative material surfaces. The aim of this study is to identify the effect of brushing with nano calcium carbonate, and calcium carbonate toothpaste on surface roughness of nano-ionomer. Eighteen nano-ionomer specimens were brushed with Aquabidest (doubledistilled water), nano calcium carbonate and calcium carbonate toothpaste. Brushing lasted 30 minutes, and the roughness value (Ra) was measured after each 10 minute segment using a surface roughness tester. The data was analyzed using repeated ANOVA and one-way ANOVA test. The value of nano-ionomer surface roughness increased significantly (p<0.05) after 20 minutes of brushing with the nano calcium carbonate toothpaste. Brushing with calcium carbonate toothpaste leaves nano-ionomer surfaces more rugged than brushing with nano calcium carbonate toothpaste.

Nano dots and nano crystals detectors applications and questions

International Nuclear Information System (INIS)

Paltiel, Y.; Shusterman, S.; Naaman, R.; Aqua, T.; Banin, U.; Aharoni, A.

2006-01-01

Full Text: Nano technology is in the center of attention in the last decade. In our work we are using nano dots, nano crystals and quantum wells to study and fabricate infrared devices. In this study we aim to develop an accurate narrow band infrared sensor that will use quantum mechanics at room temperature. The sensor is based on a FET like structure, in which the current is very sensitive to potential changes on its surface. We have shown that this configuration provides flexibility and variability in operation bandgap and response. However, the relations between the quantum and the macroscopic world are not trivial and the coupling between worlds influences the transport, noise, and optical measurements. In this talk we will show some of the infrared devices we are studying, and try to present the rich physics and relations that combine between the two worlds

Novel plasmon nano-lasers

NARCIS (Netherlands)

Hill, M.T.; Marell, M.J.H.

2010-01-01

We will discuss some of the latest developments in metallic and plasmonic nano-lasers. Furthermore we will present our latest results on further miniaturization of electrically pumped plasmonic nano-lasers and also DFB Plasmon mode devices.

Preparation and characterization of bipolar membranes modified by photocatalyst nano-ZnO and nano-CeO2

International Nuclear Information System (INIS)

Zhou Tingjin; Hu Yanyu; Chen Riyao; Zheng Xi; Chen Xiao; Chen Zhen; Zhong Jieqiong

2012-01-01

Nano-ZnO-CeO 2 coupled semiconductor was added into the chitosan (CS) anion exchange membrane layer to prepare the PVA-CMC/nano-ZnO-CeO 2 -CS (here, PVA: polyvinyl alcohol; CMC: carboxymethyl cellulose) bipolar membrane (BPM), and the prepared BPM was characterized by SEM, J-V characteristics, electronic universal testing machine, contact angle measurement and so on. Experimental results showed that nano-ZnO-CeO 2 exhibited better photocatalytic property for water splitting at the interlayer of BPM than nano-ZnO or nano-CeO 2 , which could greatly reduce the membrane impedance of the BPM. Under the irradiation of high-pressure mercury lamps, the cell voltage of PVA-CMC/nano-ZnO-CeO 2 -CS BPM decreased by 0.7 V at the current density of 60 mA/cm 2 , and the cell voltages of PVA-CMC/nano-ZnO-CS BPM and PVA-CMC/nano-CeO 2 -CS BPM were only reduced by 0.3 V and 0.5 V, respectively. Furthermore, the hydrophilicity, and mechanical properties of the modified BPM were increased.

Applications and Nano toxicity of Carbon Nano tubes and Graphene in Biomedicine Caitlin Fisher

International Nuclear Information System (INIS)

Rider, A.E.; Han, Z.J.; Kumar, S.; Levchenko, L.; Ostrikov, K.K.

2012-01-01

Owing to their unique mechanical, electrical, optical, and thermal properties, carbon nano structures including carbon nano tubes and graphenes show great promise for advancing the fields of biology and medicine. Many reports have demonstrated the promise of these carbon nano structures and their hybrid structures (composites with polymers, ceramics, and metal nanoparticles, etc.) for a variety of biomedical areas ranging from bio sensing, drug delivery, and diagnostics, to cancer treatment, tissue engineering, and bio terrorism prevention. However, the issue of the safety and toxicity of these carbon nano structures, which is vital to their use as diagnostic and therapeutic tools in biomedical fields, has not been completely resolved. This paper aims to provide a summary of the features of carbon nano tube and graphene-based materials and current research progress in biomedical applications. We also highlight the current opinions within the scientific community on the toxicity and safety of these carbon structures

The Degradation of Mechanical Properties in Halloysite Nano clay-Polyester Nano composites Exposed in Seawater Environment

International Nuclear Information System (INIS)

Saharudin, M.S.; Saharudin, M. Sh.; Wei, J.; Shyha, I.; Inam, F.

2016-01-01

Polyester based polymers are extensively used in aggressive marine environments; however, inadequate data is available on the effects of the seawater on the polyester based nano composites mechanical properties. This paper reports the effect of seawater absorption on the mechanical properties degradation of halloysite nano clay-polyester nano composites. Results confirmed that the addition of halloysite nano clay into polyester matrix was found to increase seawater uptake and reduce mechanical properties compared to monolithic polyester. The maximum decreases in microhardness, tensile and flexural properties, and impact toughness were observed in case of 1 wt% nano clay. The microhardness decreased from 107 HV to 41.7 HV (61% decrease). Young s modulus decreased from 0.6 GPa to 0.4 GPa (33% decrease). The flexural modulus decreased from 0.6 GPa to 0.34 GPa (43% decrease). The impact toughness dropped from 0.71 kJ/m"2 to 0.48 kJ/m"2 (32% decrease). Interestingly, the fracture toughnessκ_1C increased with the addition of halloysite nano clay due to the plasticization effect of the resin matrix. SEM images revealed the significant reduction in mechanical properties in case of 1 wt% reinforcement which is attributed to the degradation of the nano clay-matrix interface influenced by seawater absorption and agglomeration of halloysite nano clay.

Applications of Nano-optics.

Science.gov (United States)

Zhou, Changhe; Fainman, Yeshaiahu; Sheng, Yunlong

2011-11-01

As nanoscale fabrication techniques advance, nano-optics continues to offer enabling solutions to numerous practical applications for information optics. This Applied Optics feature issue focuses on the Application of Nano-optics. © 2011 Optical Society of America

Green synthesis and characterisation of platinum nanoparticles using quail egg yolk

Science.gov (United States)

Nadaroglu, Hayrunnisa; Gungor, Azize Alayli; Ince, Selvi; Babagil, Aynur

2017-02-01

Nanotechnology is extensively used in all parts today. Therefore, nano synthesis is also significant in all explored areas. The results of studies conducted have revealed that nanoparticle synthesis is performed by using both chemical and physical methods. It is well known that these syntheses are carried out at high charge, pressure and temperature in harsh environments. Therefore, this study investigated green synthesis method that sustains more mild conditions. In this study, quail egg yolk having high vitamin and protein content was prepared for green synthesis reaction and used for the synthesis of platinum nanoparticles in the reaction medium. Reaction situations were optimised as a function of pH, temperature, time and concentration by using quail egg yolk. The results showed that the highest platinum nanoparticles were synthesised at 20 °C and pH 6.0 for 4 h. Also, optimal concentration of metal ions was established as 0.5 mM. The synthesised platinum nanoparticles were characterised by using UV spectrum, X-ray diffraction and scanning electron microscope.

Nano materials for Medical and Dental Applications

International Nuclear Information System (INIS)

Yub Kwon, T.; Oh, D.S.; Narayanan, R.

2015-01-01

Welcome to this special issue. Nano science and nano technology concepts are applicable across all fields of science and a more widespread application of nano materials and nano technologies is imminent or already occurring in many areas, including health care. Today is scientists take those cutting-edge technologies and concepts and apply them to medicine and dentistry. They are finding a wide variety of ways to make medical and dental materials at the nano scale to take advantage of their enhanced physical and biological properties.The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances in the field of nano materials for medical and dental applications. A particular interest is given to papers exploring or discussing nano materials and nano technologies related to delivery system, bonding substitutes, and surface modification techniques applicable in these areas. For this special issue, several investigators were invited to contribute original research findings that can stimulate continuing efforts to understand the cutting-edge applications of nano materials in medicine and dentistry.

A novel approach to nano topology via neutrosophic sets

OpenAIRE

M. Lellis Thivagar; Saeid Jafari; V. Sutha Devi; V. Antonysamy

2018-01-01

The main objective of this study is to introduce a new hybrid intelligent structure called Neutrosophic nano topology. Fuzzy nano topology and intuitionistic nano topology can also be deduced from the neutrosophic nano topology. Based on the neutrosophic nano approximations we have classified neutrosophic nano topology. Some properties like neutrosophic nano interior and neutrosophic nano closure are derived.

Mass transfer in nano-fluids: A review

International Nuclear Information System (INIS)

Ashrafmansouri, Seyedeh-Saba; Esfahany, Mohsen Nasr

2014-01-01

Growing attention has been recently paid to nano-fluids because of their potential for augmenting transfer processes - i.e., heat and mass transfer. Conflicting results have been reported in the literature on mass transfer in nano-fluids. The aim of this paper is to summarize the literature on mass transfer in nano-fluids stating the conflicts and possible reasons. Literature on mass transfer in nano-fluids has been reviewed in two sections. The first section concentrates on surveying mass diffusivity in nano-fluids while the second section focuses on convective mass transfer in nano-fluids. In each section, published articles, type of nano-fluids used, size and concentration range of nanoparticles, measurement methods, maximum observed enhancement, and suggested mass transport mechanisms are summarized. (authors)

Spin-accumulation effect in magnetic nano-bridge

International Nuclear Information System (INIS)

Khvalkovskii, A.V.; Zvezdin, A.A.; Zvezdin, K.A.; Pullini, D.; Perlo, P.

2004-01-01

Large values of magnetoresistance experimentally observed in magnetic nano-contacts and nano-wires are explained in terms of spin accumulation. The investigation of the spin-accumulation effect in magnetic nano-contacts (Phys. Rev. Lett. 82 (1999) 2923) and nano-bridges (JETP Lett. 75 (10) (2002) 613), which are considered to be very promising for various spintronic applications, is presented. The two-dimensional spin-diffusion problem in a magnetic nano-bridge is solved. Dependences of the specific resistance of the domain wall and of the distribution of non-equilibrium spin density on the nano-bridge geometry and the material parameters are obtained

Effects of solution temperature on localized corrosion of high nickel content stainless steels and nickel in chromated LiBr solution

International Nuclear Information System (INIS)

Munoz, A. Igual; Anton, J. Garcia; Guinon, J.L.; Perez Herranz, V.

2006-01-01

The potentiodynamic technique has been used to study the general and localized corrosion resistance of high-alloyed stainless steels (UNS N02031 and UNS R20033) and nickel (UNS N02205) at different temperatures (from 25 deg. C to 80 deg. C) in a heavy brine Lithium Bromide solution. The engineering question of concern is the compatibility of the LiBr fluid with the structural materials of refrigeration systems which use absorption technology. The results of potentiodynamic polarization studies indicate excellent corrosion resistance for stainless steels in LiBr solution at room temperature and no big differences at temperatures above 50 deg. C. In the temperature range of 25-80 deg. C, a linear relationship exists between logarithmic of corrosion rate and reciprocal of absolute temperature (Arrhenius plot). The linear plots showed that the mechanism of the corresponding passivation process is the same for the three investigated alloys, essentially due to the presence of nickel. Tests indicated that stainless steels UNS N02031 and UNS R20033 were the most suitable for use to be used in the construction of absorption units for refrigeration purposes

Estrategias para el desarrollo de contenido educativo 3D: Producción de animaciones modeladas por ordenador utilizando software libre

Directory of Open Access Journals (Sweden)

Estéfano Vizconde Veraszto

2012-01-01

Full Text Available Este artículo presenta los resultados preliminares de la utilización de herramientas computacionales orientadas hacia el desarrollo de contenido 3D, en particular para la educación, en una Institución de Educación Superior en la ciudad de Mogi Guaçu/SP/Brasil, la Faculdade Municipal “Professor Franco Montoro”. Para ello, tenemos la intención de utilizar un conjunto de herramientas basadas en software libre, de calidad excelente y con un gran potencial para el desarrollo de las aplicaciones propuestas. Como primer resultado de este proyecto, se presentan los resultados de un experimento donde los estudiantes del curso de  Graduación en Ciéncias Informáticas han desarrollado una serie de animaciones modeladas por ordenador con la utilización de software libre. En este contexto, se prevé la creación de nuevas "células" para el desarrollo de animaciones y simulaciones con la participación de los alumnos interesados en este ámbito profesional, ya sean profesionales actuantes en el área de computación, o no.

Nano catalysis: Academic Discipline and Industrial Realities

International Nuclear Information System (INIS)

Olveira, S.; Forster, S.P.; Seeger, S.

2014-01-01

Nano technology plays a central role in both academic research and industrial applications. Nano enabled products are not only found in consumer markets, but also importantly in business to business markets (B2B). One of the oldest application areas of nano technology is nano catalysis—an excellent example for such a B2 B market. Several existing reviews illustrate the scientific developments in the field of nano catalysis. The goal of the present review is to provide an up-to-date picture of academic research and to extend this picture by an industrial and economic perspective. We therefore conducted an extensive search on several scientific databases and we further analyzed more than 1,500 nano catalysis-related patents and numerous market studies. We found that scientists today are able to prepare nano catalysts with superior characteristics regarding activity, selectivity, durability, and recoverability, which will contribute to solve current environmental, social, and industrial problems. In industry, the potential of nano catalysis is recognized, clearly reflected by the increasing number of nano catalysis-related patents and products on the market. The current nano catalysis research in academic and industrial laboratories will therefore enable a wealth of future applications in the industry

Editorial Nano structures for Medicine and Pharmaceuticals

International Nuclear Information System (INIS)

Xing-Jie, L.; Kumar, A.; Donglu, S.; Daxiang, C.

2012-01-01

The rapid developments in nano structured materials and nano technology will have profound impact in many areas of biomedical applications including delivery of drugs and biomolecules, tissue engineering, detection of bio markers, cancer diagnosis, cancer therapy, and imaging. This field is expanding quickly, and a lot of work is ongoing in the design, characterization, synthesis, and application of materials, for controlling shape and size at nanometer scale to develop highly advanced materials for biomedical application and even to design better pharmaceutical products. In recent years, novel nano structure with multi functionalities has been focused on the use of nano structures toward solving problems of biology and medicine. The main scope of this special issue is to demonstrate the latest achievement of nano technology and its application in nano medicine particularly in new approaches for drug delivery such as targeted drug delivery system, nano structure for drug storage, nano materials for tissue engineering, medical diagnosis and treatment, and generation of new kinds of materials from biological sources. Therefore, many critical issues in nano structured materials, particularly their applications in biomedicine, must be addressed before clinical applications. This special issue devotes several review and research articles encompassing various aspects of nano materials for medicine and pharmaceuticals.

The nano-science of C60 molecule

International Nuclear Information System (INIS)

Rafii-Tabar, H.

2002-01-01

Over the past few years, nano-science and its associated nano-technology have emerged into prominence in research institutions across the world. They have brought about new scientific and engineering paradigms, allowing for the manipulation of single atoms and molecules, designing and fabricating new materials, atom-by-atom, and devices that operate on significantly reduced time and length scales. One important area of research in nano-science and nano technology is carbon-based physics in the form of fullerene physics. The C 6 0 molecule, and other cage-like fullerenes, together with carbon nano tubes provide objects that can be combined to generate three-dimensional functional structures for use in the anticipated nano-technology of future. The unique properties of C 6 0 can also be exploited in designing nano-phase thin films with applications in nano-scope device technology and processes such as nano-lithography. This requires a deep understanding of the highly complex process of adsorption of this molecule on a variety of substrates. We review the field of nano-scale nucleation and growth of C 6 0 molecules on some of the technologically important substrates. In addition to experimental results, the results of a set of highly accurate computational simulations are also reported

Métodos para generar trayectorias libres de colisiones en entornos multidimensionales

Directory of Open Access Journals (Sweden)

Edwin Francis Cárdenas

2011-05-01

Full Text Available Planear los movimientos de un robot de forma fiable sin que colisione con su entorno se ha convertido en un problema relevante en la última década. La idea central de este artículo es exponer dos de los principales métodos que permiten generar trayectorias libre de colisiones en cualquier espacio n-dimensional. La importancia de conocer estas estrategias radica en que estos mismos algoritmos se han aplicado en áreas distintas a la robótica, como diseño de medicamentos, animación computarizada e inteligencia artificial. También presentamos un referente histórico de varios métodos de generación de trayectorias y mostramos mediante simulaciones como las estrategias de los campos potenciales artificiales y de los mapas probabilísticos funcionan, siendo los más apropiados en virtud de los aspectos teóricos expresados en otros textos especializados.

Le consentement libre et éclairé aux soins en psychiatrie

Science.gov (United States)

Neilson, Grainne; Chaimowitz, Gary

2015-01-01

Résumé Le patient a le droit d’être informé sur les soins de santé qui lui sont proposés et de participer activement à la prise de décisions relativement à ces soins. Le respect de la dignité et de l’autonomie de la personne passe par le respect de son droit de prendre des décisions à propos de ses soins psychiatriques, notamment de refuser un traitement, pour autant qu’elle soit apte à prendre des décisions. Il importe que le psychiatre connaisse les fondements éthiques du consentement libre et éclairé et les exigences prévues par le droit en cette matière, y compris la jurisprudence. Le consentement n’est pas immuable, pouvant changer avec le temps, au fil de l’évolution des conditions et des circonstances. Par conséquent, le consentement doit être un processus continu.

Study the scratch resistance of UV-cured epoxy acrylate in the presence of nano alumina particles via nano indentation

International Nuclear Information System (INIS)

Bastani, S.; Ebrahimi, M.; Kardar, P.

2007-01-01

In this research, an epoxy acrylate resin was synthesized, then the synthesized resin was used along with different multifunctional acrylate monomers and with a photoinitiator in different formulations and cured with UV radiation. The experiments were designed based on mixture method by using Design-Expert software. To investigate the effect of nano particles on the some of physical and mechanical properties of the UV cured resins, the suspension of nano alumina in TPGDA, was used in formulations. The hardness of prepared films was evaluated by using konig hardness tester and nano indentater. The scratch resistance and gloss of the films were also determined. The results showed that the visibility of scratch decreased when the nano particles were used. It seems that the self-healing property of the film improved in the presence of nano particles. The hardness of the samples with nano particles was found to be less than that the samples of without any nano particles. It was observed that the gloss of the films with the nano particles, almost was the same as the film without nano particles. (Author)

LiCl Dehumidifier LiBr absorption chiller hybrid air conditioning system with energy recovery

Science.gov (United States)

Ko, Suk M.

1980-01-01

This invention relates to a hybrid air conditioning system that combines a solar powered LiCl dehumidifier with a LiBr absorption chiller. The desiccant dehumidifier removes the latent load by absorbing moisture from the air, and the sensible load is removed by the absorption chiller. The desiccant dehumidifier is coupled to a regenerator and the desiccant in the regenerator is heated by solar heated hot water to drive the moisture therefrom before being fed back to the dehumidifier. The heat of vaporization expended in the desiccant regenerator is recovered and used to partially preheat the driving fluid of the absorption chiller, thus substantially improving the overall COP of the hybrid system.

Nano Surface Engineering in the 21st Century

Institute of Scientific and Technical Information of China (English)

Xu Bin-shi; Wang Hai-dou; Dong Shi-yun; Shi Pei-jing; Xu Yi

2004-01-01

Nano surface engineering is the new development of surface engineering, and is the typical representation that the advanced nano technology improves the traditional surface engineering. The connotation of nano surface engineering is profound. The initial stage of nano surface engineering is realized at present day. The key technologies of nano surface engineering are the support to the equipment remanufacturing. Today the relatively mature key technologies are: nano thermal spraying technology, nano electric-brush plating technology, nano self-repairing anti-friction technology and metal surface nanocrystallization, etc. Many scientific issues have been continuously discovered. Meanwhile they have been applied in the practice more and more, and have archived the excellent remanufacturing effect.

Nano-structural characteristics and optical properties of silver chiral nano-flower sculptured thin films

Energy Technology Data Exchange (ETDEWEB)

Savaloni, Hadi, E-mail: savaloni@khayam.ut.ac.ir [Department of Physics, University of Tehran, North-Kargar Street, Tehran (Iran, Islamic Republic of); Haydari-Nasab, Fatemh; Malmir, Mariam [Department of Physics, University of Tehran, North-Kargar Street, Tehran (Iran, Islamic Republic of)

2011-08-15

Silver chiral nano-flowers with 3-, 4- and 5-fold symmetry were produced using oblique angle deposition method in conjunction with the rotation of sample holder with different speeds at different sectors of each revolution corresponding to symmetry order of the acquired nano-flower. Atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM), were employed to obtain morphology and nano-structure of the films. Optical characteristics of silver chiral nano-flower thin films were obtained using single beam spectrophotometer with both s- and p-polarization incident light at 30{sup o} and 70{sup o} incidence angles and at different azimuthal angles ({phi}). Optical spectra showed both TM (TDM (transverse dipole mode) and TQM (transverse quadruple mode)) and LM (longitudinal mode) Plasmon resonance peaks. For 3- and 4-fold symmetry chiral nano-flowers the s-polarization extinction spectra obtained at different azimuthal angles did not show significant change in the Plasmon peak position while 5-fold symmetry chiral nano-flower showed a completely different behavior, which may be the result of increased surface anisotropy, so when the {phi} angle is changed the s-polarization response from the surface can change more significantly than that for lower symmetries. In general, for 3-, 4- and 5-fold symmetry chiral nano-flowers a sharp peak at lower wavelengths (<450 nm) is observed in the s-polarization spectra, while in addition to this peak a broad peak at longer wavelengths (i.e., LM) observed in the p-polarization spectra, which is more dominant for 70{sup o} incidence angle.

Label it or ban it? Public perceptions of nano-food labels and propositions for banning nano-food applications

Science.gov (United States)

Chuah, Agnes S. F.; Leong, Alisius D.; Cummings, Christopher L.; Ho, Shirley S.

2018-02-01

The future of nano-food largely hinges on public perceptions and willingness to accept this novel technology. The present study utilizes the scientific literacy model and psychometric paradigm as the key theoretical frameworks to examine the factors influencing public support for labeling and banning of nano-food in Singapore. Using data collected from a nationally representative survey of 1001 respondents, the findings demonstrated that attitudes toward technology, preference for natural product, science knowledge, and risk perception were found to substantially affect public support for both labeling and banning of nano-food. Conversely, attention to food safety news on traditional media and attention to nano-news on new media were only associated with public support for labeling of nano-food. Similarly, benefit perception was only significantly associated with public support for banning of nano-food. Theoretically, these findings support the growing body of literature that argues for the significant role played by predispositions, media use, science knowledge, and risk and benefit perceptions on attitude formation toward nano-food. It serves as the pioneering piece to address the aspect of banning in the field of nano-food. Practically, insights drawn from this study could aid relevant stakeholders in enlisting effecting strategies to convey the benefits of nano-food while mitigating the risk perceptions among the public.

From Nano Structure to Systems: Fabrication and Characterization

International Nuclear Information System (INIS)

Uda Hashim

2011-01-01

Currently, the interest in nano technology research has been grown rapidly. With the latest technology, it is possible to arrange atoms into structures that are only a few nanometers in size. Dimension for nano structure is between 0.1 and 100nm where the actual size of 1nm is equal to 10-9 m or just about a few atoms thick. In other word, a nano structure is an object which it size is about four atom diameters or 1/50000 of a human hair. Due to the connecting of a patterned silicon substrate with biomolecules and the small size and large surface-to-volume ratio, it opens much new possibility for assembling nano structures.The ultimate goal is to fabricate devices that have every atom in the right place. Such technology would give the opportunity to minimize the size of a device and to reduce the material, energy and time necessary to perform its task. Potential applications include electrical circuits, mechanical devices and medical instruments. There are two most important nano structures that are extensively studied and researched in various organizations which are nano wire and nano gap. Nano wires is a new class of nano structure that have attracted attention and great research interest in the last few years because of their potential applications in nano technology such as nano electronic, nano mechanical and biomedical engineering. Fabrication of Nano wires is one of the great challenges today. Conventional lithography methods are not capable to produce Nano wires and even with advance nano lithography sizes below 100 nm may not easily be achieved. Nano wire can be produced in two approaches, which are top down and bottom-up method. Very small nano wires which can be produced by using top-down nano fabrication methods are Scanning Electron Microscope (SEM) based Electron Beam Lithography (EBL) method, and Spacer Patterning Lithography (SPL) method. The top-down nano fabrication method based on EBL was the design of the Nano wires Pattern Design (NPD). The

The Influence of Environmental Friendliness on Green Trust: The Mediation Effects of Green Satisfaction and Green Perceived Quality

Directory of Open Access Journals (Sweden)

Yu-Shan Chen

2015-07-01

Full Text Available As global green trends became more prevalent, green marketing also developed into an important issue. Although prior literature explored the main factors affecting green trust, it was inconclusive as to how environmental friendliness could affect the green trust in green marketing. This study aims to focus on the positive influence of environmental friendliness on green trust, and explore the mediation effects of green satisfaction and green perceived quality. This study undertakes an empirical study by means of questionnaire survey. The respondents are consumers who have experience purchasing green products. This study applies structural equation modeling (SEM to test the hypotheses. The findings of this study indicate that (1 environmental friendliness has a significant positive impact on green satisfaction, green perceived quality, and green trust; (2 both green satisfaction and green perceived quality positively affect green trust; and (3 green satisfaction and green perceived quality partially mediate the positive relationship between environmental friendliness and green trust.

Fabrication of Nano-CeO2 and Application of Nano-CeO2 in Fe Matrix Composites

International Nuclear Information System (INIS)

Tiebao, W.; Chunxiang, C.; Xiaodong, W.; Guobin, L.

2010-01-01

It is expatiated that nano-CeO2 is fabricated by the direct sedimentation method. The components and particles diameter of nano-CeO2 powders are analyzed by XRD and SEM . The thermodynamic analysis and acting mechanism of nano-CeO2 with Al in Fe matrix composites are researched, which shows that the reaction is generated between CeO2 and Al in the composite, that is, 3CeO2+4Al - 2Al2O3+3[Ce], which obtains Al2O3 and active [Ce] during the sintering process. The active [Ce] can improve the performance of CeO2/Fe matrix composites. The suitable amount of CeO2 is about 0.05% in CeO2/Fe matrix composites. SEM fracture analysis shows that the toughness sockets in nano-CeO2/Fe matrix composites are more than those in no-added nano-CeO2 composites, which can explain that adding nano-CeO2 into Fe matrix composite, the toughness of the composite is improved significantly. Applied nano-CeO2 to Fe matrix diamond saw blades shows that Fe matrix diamond saw blade is sharper and of longer cutting life than that with no-added nano-CeO2.

Inorganic fullerene-type WS2 nanoparticles: processing, characterization and its photocatalytic performance on malachite green

Science.gov (United States)

Hazarika, Saurabh Jyoti; Mohanta, Dambarudhar

2017-05-01

In this work, we have employed a hydrothermal route for the synthesis of fullerene-type tungsten disulfide (WS2) nanoparticles. X-ray diffraction analysis signifies a hexagonal crystal structure of WS2 with the crystallites experiencing preferred orientations along (002) and (103) planes. The agglomerated nanoparticles and inorganic fullerene (IF)-type structures are apparently observable from the high-resolution electron micrographs. Raman spectrum shows prominent E1_{{2{{g}}}} and A 1g modes emanating from the IF nano-WS2 system. The Tauc's plot obtained from the optical absorption data predicts a direct band gap of 1.91 eV for the nano-WS2 system; whereas, photoluminescence analysis reveals a broad emission peak located at 638 nm and is ascribed to the associated transition from the indirect to direct nature of the band gap. The photocatalytic decomposition of malachite green (MG) solution (30 mg/l) by WS2 (100 mg/l) under UV and visible light irradiation has been evaluated. The latter condition exhibited a better photocatalytic response with the MG degradation as high as 71.2%, revealed for 120 min. Photocatalytic and optoelectronic features of IF-type nano-WS2 would bring new insights not only to resolve issues related to environmental hazards, but also in functional devices of technological relevance.

Reactive oxygen species-related activities of nano-iron metal and nano-iron oxides.

Science.gov (United States)

Wu, Haohao; Yin, Jun-Jie; Wamer, Wayne G; Zeng, Mingyong; Lo, Y Martin

2014-03-01

Nano-iron metal and nano-iron oxides are among the most widely used engineered and naturally occurring nanostructures, and the increasing incidence of biological exposure to these nanostructures has raised concerns about their biotoxicity. Reactive oxygen species (ROS)-induced oxidative stress is one of the most accepted toxic mechanisms and, in the past decades, considerable efforts have been made to investigate the ROS-related activities of iron nanostructures. In this review, we summarize activities of nano-iron metal and nano-iron oxides in ROS-related redox processes, addressing in detail the known homogeneous and heterogeneous redox mechanisms involved in these processes, intrinsic ROS-related properties of iron nanostructures (chemical composition, particle size, and crystalline phase), and ROS-related bio-microenvironmental factors, including physiological pH and buffers, biogenic reducing agents, and other organic substances. Copyright © 2014. Published by Elsevier B.V.

Green synthesis of silver nanoparticles and its application for mosquito control

Directory of Open Access Journals (Sweden)

Naba Kumar Mondal

2014-02-01

Full Text Available Objective: To synthesize and characterize silver nanoparticles from aqueous root extract of Parthenium hysterophorus (P. hysterophorus and also to evaluate the potentiality of synthesized silver nanoparticles as larvacidal agent against Culex quinquefasciatus (Cx. quinquefasciatus. Methods: The silver nano particles were generated using root extract of P. hysterophorus. The characterization of synthesized nanoparticles was done by visual color change, UV-Vis spectrum, scanning electron micrograph, fluorescent microscope and Fourier transform infrared spectroscopy. Results: It was found that aqueous silver ions can be reduced by aqueous root extract of P. hysterophorus to generate extremely stable silver nanoparticles in aqueous medium. Larvae were exposed to varying concentrations of plant extracts, aqueous silver nitrate solution and synthesized silver nanoparticles for 0, 24 and 48 h separately. Aqueous root extract showed moderate larvicidal effects; however, the maximum efficacy (60.18% was observed with the synthesized silver nanoparticles against the larvae of Cx. quinquefasciatus. Conclusions: These results suggest that the green synthesis of silver nanoparticles have the potential to be used as an ideal eco-friently approach for the control of the Cx. quinquefasciatus. This is the first report on the mosquito larvicidal activity of the nano particle synthesized by P. hysterophorus.

Nano-sensing of the orientation of fluorescing molecules with active coated nano-particles

DEFF Research Database (Denmark)

Arslanagic, Samel; Ziolkowski, Richard W.

2015-01-01

The potential of using active coated nano-particles to determine the orientation of fluorescing molecules is reported. By treating each fluorescing molecule as an electric Hertzian dipole, single and multiple fluorescing molecules emitting coherently and incoherently in various orientations...... are considered in the presence of active coated nano-particles. It is demonstrated that in addition to offering a means to determine the orientation of a single molecule or the over-all orientation of the molecules surrounding it, the nature of the far-field response from the active coated nano...

Impacto de la implantación de una política de trabajo libre de humo en una empresa

Directory of Open Access Journals (Sweden)

Artazcoz L.

2003-01-01

Full Text Available Objetivo: Evaluar el impacto de la implantación de una política integral de trabajo libre de humo en una empresa. Método: Se evaluó el impacto de la implantación de una política integral de trabajo libre de humo entre octubre de 2001 y febrero de 2003 en un centro de 184 trabajadores mediante dos encuestas dirigidas a toda la plantilla, una al comienzo y otra 14 meses después. Resultados: Se redujo tanto la exposición pasiva al humo del tabaco como el consumo de cigarrillos entre las personas que continuaban fumando. La proporción de personas no expuestas al humo del tabaco ambiental en el trabajo aumentó del 32 al 84% (p < 0,001 y el consumo medio de cigarrillos entre las que continuaban fumando se redujo en 7,3 diarios (p = 0,049. Conclusiones: La delimitación de las áreas donde se permite fumar no sólo reduce la exposición pasiva al humo del tabaco en el centro de trabajo sino que también podría animar a los fumadores a dejar de fumar o reducir el consumo.

White light emission from Er2O3 nano-powder excited by infrared radiation

Science.gov (United States)

Tabanli, Sevcan; Eryurek, Gonul; Di Bartolo, Baldassare

2017-07-01

Phosphors of Er2O3 nano-crystalline powders were synthesized by the thermal decomposition method. The structural properties of the nano-powders were investigated with XRD and HRTEM measurements. The cubic phase with a = 10.540 Å was the only phase observed. The average crystalline sizes and the widths of the grain size distribution curves were determined to be 27.2, 18.7 and 9.7 nm, respectively. The spectroscopic properties of the Er2O3 nano-powder were studied by measuring the luminescence, decay and rise patterns under 808 and 975 nm diode laser excitations. A peculiar effect of the pressure was observed since an optically active ion (Er) is part of the complex and not a dopant. A broad band of the white light emission combined with blue, green and red up-conversion emission bands of Er3+ ions were observed at 0.03 mbar pressure under both excitation wavelengths. Only, an intense broad band white light emission was observed from these nanocrystals at atmospheric pressure. Rising patterns show that the white light intensity reaches its maximum value more rapidly under 975 nm excitation although it decays slower than that of 808 nm excitation. The color quality parameters such as the color coordinate (CRI), correlated color temperature and the color rendering index were found to vary with both the excitation wavelength and the ambient pressure indicating that these nanocrystals could be considered good white light emitting source under the infrared excitations.

Nano market and analysis of technology

International Nuclear Information System (INIS)

2001-10-01

This book gives descriptions of summary of nano technology with meaning, character and field, trend of technical development in domestic, current condition of nano basic research in domestic, trend of technical development in foreign country such as summary, trend of technology by industrial field, machine and metronics, material and process, standard of nano mechanism, scale of market and trend, competitiveness of nano technology of major country and research development system in Japan, Korean company and major countries.

Green power certification: environmental and consumer protection benefits of the Green-e programme

Energy Technology Data Exchange (ETDEWEB)

Wingate, M.; Hamrin, J. [Center for Resource Solutions (United States); Rabago, K. [Rocky Mountain Inst. (United States); Wiser, R. [Lawrence Berkeley National Lab. (United States)

2000-06-01

This article gives details of the Green-e environmental certification programme which certifies electricity generated from renewable energy sources in the US. This first non-profit certification programme originally was set up for California, and has now spread to other regions. The objectives of the Green-e programme, the need for the electricity product to meet minimum criteria to qualify, marketer requirements, verification of product claims, administration of the programme, and the second year programme results are discussed. The way in which the Green-e programme fits in with other programmes such as those set up by the state and federal customer protection agencies to help consumers select environmentally superior power is described.

Control of the Nano-Particle Weight Ratio in Stainless Steel Micro and Nano Powders by Radio Frequency Plasma Treatment

Directory of Open Access Journals (Sweden)

Dong-Yeol Yang

2015-11-01

Full Text Available This study describes how to make stainless steel hybrid micro-nano-powders (a mixture of micro-powder and nano-powder using an in situ one-step process via radio frequency (RF thermal plasma treatment. Nano-particles attached to micro-powders were successfully prepared by RF thermal plasma treatment of stainless steel powder with an average size of 35 μm. The ratio of nano-powders is estimated with a two-dimensional fluid simulation that calculates the temperature profile influencing the rate of surface evaporation. The simulation is conducted to determine the variation of the input power and the distance from the plasma torch to the feeding nozzle. It was demonstrated experimentally that the nano-powder ratio in the micro-nano-powder mixture can be controlled by adjusting the feeding rate, plasma power, feeding position and quenching effect during plasma treatment. The ratio of nano-particles in the micro-nano-powder mixture was controlled in a range from 0.1 (wt. % to 30.7 (wt. %.

Design and Preparation of Nano-Lignin Peroxidase (NanoLiP by Protein Block Copolymerization Approach

Directory of Open Access Journals (Sweden)

Turgay Tay

2016-06-01

Full Text Available This study describes the preparation of nanoprotein particles having lignin peroxidase (LiP using a photosensitive microemulsion polymerization technique. The protein-based nano block polymer was synthesized by cross-linking of ligninase enzyme with ruthenium-based aminoacid monomers. This type polymerization process brought stability in different reaction conditions, reusability and functionality to the protein-based nano block polymer system when compared the traditional methods. After characterization of the prepared LiP copolymer nanoparticles, enzymatic activity studies of the nanoenzymes were carried out using tetramethylbenzidine (TMB as the substrate. The parameters such as pH, temperature and initial enzyme concentration that affect the activity, were investigated by using prepared nanoLip particles and compared to free LiP. The reusability of the nano-LiP particles was also investigated and the obtained results showed that the nano-LiP particles exhibited admirable potential as a reusable catalyst.

3° Jornadas de TIC e Innovación en el Aula: "Enlaces entre educación, conocimiento libre y tecnologías digitales"

OpenAIRE

González, Alejandro Héctor; Martin, María Mercedes

2015-01-01

Compilación de las ponencias presentadas en las III Jornadas de TIC e Innovación en el Aula: Enlaces entre educación, conocimiento libre y tecnologías digitales, durante los días 7 y 8 de septiembre de 2015.

The nano-BIon in nanostructure

Energy Technology Data Exchange (ETDEWEB)

Sepehri, Alireza, E-mail: alireza.sepehri@uk.ac.ir [Nano Research Center of the Ferdowsi University, Mashhad (Iran, Islamic Republic of); Faculty of Physics, Shahid Bahonar University, P.O. Box 76175, Kerman (Iran, Islamic Republic of)

2016-04-01

Recently, some authors have considered the superconductivity in nano-cubes and shown that by decreasing the size of these systems, superconductivity order parameter increases. In this research, we show that the same result can be obtained in a nano-BIon which is a configuration of two layers of cuprates connected by an electronic tube. This tube is a channel for transporting energy and matter inside a superconductor and acts as a wormhole in this system. This wormhole-like-tube is formed by decreasing the separation distance between layers of nano-cuprate and enhancing the cooper hopping pairing between layers. We estimate the critical temperature of superconductor and find that it depends on the size of nano-BIon and coupling between atoms in a layer. Also, we observe that external magnetic field generates a new tube which causes losing the energy density of nano-BIon between two layers and decreasing critical temperature of superconductor.

A Novel Silicon-based Wideband RF Nano Switch Matrix Cell and the Fabrication of RF Nano Switch Structures

Directory of Open Access Journals (Sweden)

Yi Xiu YANG

2011-12-01

Full Text Available This paper presents the concept of RF nano switch matrix cell and the fabrication of RF nano switch. The nano switch matrix cell can be implemented into complex switch matrix for signal routing. RF nano switch is the decision unit for the matrix cell; in this research, it is fabricated on a tri-layer high-resistivity-silicon substrate using surface micromachining approach. Electron beam lithography is introduced to define the pattern and IC compatible deposition process is used to construct the metal layers. Silicon-based nano switch fabricated by IC compatible process can lead to a high potential of system integration to perform a cost effective system-on-a-chip solution. In this paper, simulation results of the designed matrix cell are presented; followed by the details of the nano structure fabrication and fabrication challenges optimizations; finally, measurements of the fabricated nano structure along with analytical discussions are also discussed.

Rapid thermal melted TiO2 nano-particles into ZnO nano-rod and its application for dye sensitized solar cells

International Nuclear Information System (INIS)

Chao, Ching-Hsun; Chang, Chi-Lung; Chan, Chien-Hung; Lien, Shui-Yang; Weng, Ko-Wei; Yao, Kuo-Shan

2010-01-01

TiO 2 nano-particles with an anchored ZnO nano-rod structure were synthesized using the hydrothermal method to grow ZnO nano-rods and coated TiO 2 nano-particles on ZnO nano-rods using the rapid thermal annealing method on ITO conducting glass pre-coated with nano porous TiO 2 film. The XRD study showed that there was little difference in crystal composition for various types of TiO 2 nano-particles anchored to ZnO nano-rods. The as-prepared architecture was characterized using field-emission scanning electron microscopy (FE-SEM). Films with TiO 2 nano-particles anchored to ZnO nano-rods were used as electrode materials to fabricate dye sensitized solar cells (DSSCs). The best solar energy conversion efficiency of 2.397% was obtained by modified electrode material, under AM 1.5 illumination, achieved up to J sc = 15.382 mA/cm 2 , V oc = 0.479 V and fill factor = 32.8%.

The green building envelope : Vertical greening

NARCIS (Netherlands)

Ottelé, M.

2011-01-01

Planting on roofs and façades is one of the most innovative and fastest developing fields of green technologies with respect to the built environment and horticulture. This thesis is focused on vertical greening of structures and to the multi-scale benefits of vegetation. Vertical green can improve

Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver

Directory of Open Access Journals (Sweden)

Hassan Siahposht

2012-06-01

Full Text Available Present study conducted to review effects of heat treatment on weight loss, water adsorption, and thickness swelling of poplar (Populus nigra and beech (Fagus oreintalis woods impregnated with nano-copper and nano-silver. Specimens werepressur (2.5 bar impregnated with 400 PPM water-based solution of nano-copper and nano-silver particles in a pressure vessel. For heat treatment, nano-cupper,  nano-silver impregnated and control specimens, were heat treated at 145°C temperature for 24 hours. Water absorption and thickness swelling decreased in heat treated and nano-heat treated specimens and this decrease in specimens impregnated with nano-copper and nano-silver was more obvious than in heat treated control specimens. The reasons were the degradation in crystal sections of celluloses chains and the ink variation of wood polymers. On the other hand, a comparison between heat treated and nano- heat treated specimens has shown weight loss further in nano-heat treated specimens. This shows that retent nano-copper and nano-silver by impregnation facilitates heat transfer in wood; and it may increase the process of degradation and pyrolysis of wood structures in inner parts of specimens.

Synthesis of nano-composite surfaces via the co-deposition of metallic salts and nano particles

Energy Technology Data Exchange (ETDEWEB)

MacFarlane, J.W.; Tesh, S.J.; Crane, R.A.; Hallam, K.R.; Scott, T.B.

2014-03-15

Highlights: • Nanofaceted surfaces are prepared by a low current density (<0.1 A cm{sup 2}) electrodeposition method. • Surfaces are formed of nanoparticles anchored to a conductive (carbon) substrate. • Formed surfaces show a high nano-reactivity and surface area. • Demonstration of INP/FeCl{sub 3} nanocomposite for water filtration effectively removing BTEX contamination. -- Abstract: A novel, low energy method for coating different nano-particles via electro-deposition to a recyclable carbon glass supporting structure is demonstrated. In the resulting composite, the nano-material is bound to the substrate surface, thereby removing the potential for causing harmful interactions with the environment. Nano-particles were suspended in a salt solution and deposited at low current densities (<0.1 A cm{sup −2}) producing thin (<100 nm), uniform nano-faceted surfaces. A co-deposition mechanism of nano-particles and cations from the salt solution is proposed and explored. This has been successfully demonstrated for iron, sliver, titanium in the current work. Furthermore, the removal of the surface coatings can be achieved via a reversed current applied over the system, allowing for the recovery of surface bound metal contaminants. The demonstrated applicability of this coating method to different nano-particle types, is useful in many areas within the catalysis and water treatment industries. One such example, is demonstrated, for the treatment of BTEX contamination and show a greatly improved efficiency to current leading remediation agents.

Influencia de la resistencia eléctrica en la estimación del agua corporal total y la masa libre de grasa

Directory of Open Access Journals (Sweden)

Maraelys Morales González

2013-10-01

Full Text Available Se realizó un estudio transversal y controlado, a fin de evaluar la influencia de los valores no corregidos y corregidos de la resistencia eléctrica, medidos con los analizadores Bodystat® 1500-MDD y BioScan® 98 en el agua corporal total y la masa libre de grasa, de 31 sujetos aparentemente sanos y 31 niños con diferentes afecciones, atendidos en el Servicio de Oncohematología del Hospital Infantil Sur de Santiago de Cuba, desde septiembre hasta octubre del 2009. Se emplearon 2 ecuaciones por cada parámetro biológico, y como criterio estadístico la prueba t de student de 2 medias de muestras apareadas. La diferencia entre los valores no corregidos y corregidos de la resistencia eléctrica no influyó significativamente en los 2 parámetros biológicos; por tanto, es posible usarlos indistintamente para estimar el agua corporal total y la masa libre de grasa en individuos aparentemente sanos y pacientes con diferentes enfermedades.

GREEN MANAGEMENT: THE REALITY OF BEING GREEN IN BUSINESS

OpenAIRE

Tran, Ben

2009-01-01

Green management and going green are not as clear cut and easy as hyped by the general media. While going ecologically green is indeed beneficial and appropriate, the process and procedure of becoming green is anything but easy. Firstly, turning green is largely not a legal requirement, but a voluntary process. Thus, even though LEED (which is by far the more publicly known green certification standard) governs the certification of the green management effort, it is not a compulsory condition...

Nano cobalt oxides for photocatalytic hydrogen production

KAUST Repository

Mangrulkar, Priti A.

2012-07-01

Nano structured metal oxides including TiO 2, Co 3O 4 and Fe 3O 4 have been synthesized and evaluated for their photocatalytic activity for hydrogen generation. The photocatalytic activity of nano cobalt oxide was then compared with two other nano structured metal oxides namely TiO 2 and Fe 3O 4. The synthesized nano cobalt oxide was characterized thoroughly with respect to EDX and TEM. The yield of hydrogen was observed to be 900, 2000 and 8275 mmol h -1 g -1 of photocatalyst for TiO 2, Co 3O 4 and Fe 3O 4 respectively under visible light. It was observed that the hydrogen yield in case of nano cobalt oxide was more than twice to that of TiO 2 and the hydrogen yield of nano Fe 3O 4 was nearly four times as compared to nano Co 3O 4. The influence of various operating parameters in hydrogen generation by nano cobalt oxide was then studied in detail. Copyright © 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

La ley de software libre en Colombia: tecnologías, imaginarios y reivindicaciones políticas

OpenAIRE

Pereira-García, Alexander

2017-01-01

Este trabajo refiere al software libre, en su consideración de artefacto tecnológico relevante en el proceso de estructuración de la sociedad global de la información. Particularmente es una indagación sobre el tránsito de los proyectos de ley que se presentaron en el Congreso de la República con el fin de regular el uso, producción y comercialización de esta tecnología en Colombia, los cuales no lograron convertirse en norma. Para dicho estudio he realizado una aproximación desde diversos ma...

La inversión extranjera directa en América del Norte: intersecciones del libre comercio

OpenAIRE

Michael J. Twomey

1993-01-01

Este trabajo analiza las experiencias de Canadá, México y Estados Unidos con la inversión extranjera directa. Si bien la perspectiva de un acuerdo sobre el Tratado de Libre Comercio para América del Norte motiva este tipo de estudio comparativo, existen también varios paralelos insospechados entre los casos de México y Canadá, no sólo por los efectos que causa en ellos su vecino común, sino también por la importancia de las materias primas en la estructura de producción de estos países....

Nano-encapsulation of fish oil in nano-liposomes and its application in fortification of yogurt.

Science.gov (United States)

Ghorbanzade, Tahere; Jafari, Seid Mahdi; Akhavan, Sahar; Hadavi, Roxana

2017-02-01

Fish oils have many dietary benefits, but due to their strong odors and rapid deterioration, their application in food formulations is limited. For these reasons, nano-liposome was used to nano-encapsulate fish oil in this study and encapsulated fish oil was utilized in fortifying yogurt. Physicochemical properties of produced yogurt including pH, acidity, syneresis, fatty acid composition, peroxide value as well as sensory tests were investigated during three weeks storage at 4°C. Nano-liposome encapsulation resulted in a significant reduction in acidity, syneresis and peroxide value. The results of gas chromatography analyses revealed that after 21days storage, yogurt fortified with nano-encapsulated fish oil had a higher DHA and EPA contents than yogurt containing free fish oil. Overall, the results of this study indicates that adding nano-encapsulated fish oil into yogurt gave closer characteristics to control sample in terms of sensory characteristics than yogurt fortified with free fish oil. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nano-based PCMs for building energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Biswas, Kaushik [ORNL

2016-01-01

Thermal storage using phase change materials (PCMs) is seen as a viable method for improving the energy efficiency of buildings. PCMs have been used in building applications in various forms PCM slurries in heat exchangers, macro- or microencapsulated PCMs in building envelopes, bulk PCM for modulating photovoltaic temperatures, etc. In the last decade a new class of PCMs, called nano-enhanced PCM (or nanoPCM), has been extensively investigated with the goal of improving the heat transfer and thermal storage properties of PCMs. NanoPCMs can primarily be categorized as nano-encapsulated PCMs and nanoparticle-PCM composites. The former are nano-sized capsules in which the PCM forms the core and is surrounded by a high-conductivity membrane or shell. The latter consist of PCM supported within nanostructures or nanoparticles dispersed in PCMs. This article reviews the current state of nanoPCM synthesis and characterization of their heat transfer and thermal storage properties. Further, a critical review of nanoPCM applications and their potential energy benefits is performed. Nano-enhanced PCMs exhibit higher thermal conductivities than regular PCM. However, whether the higher conductivity is desirable in all applications and if the property enhancements are worth the cost and effort needed to create nanoPCMs are questions that still need to be answered.

Characterization of Aerosols Generated by nano-second Laser Ablation of an Acrylic Paint

International Nuclear Information System (INIS)

Dewalle, P.; Vendel, J.; Dewalle, P.; Weulersse, J.M.; Dewalle, P.; Herve, Ph.; Dewalle, P.; Decobert, G.

2010-01-01

This study focuses on particles produced during laser ablation of a green colored acrylic wall paint, which is frequently used in industrial buildings and in particular in nuclear installations. Ablation is carried out with a Nd:YAG laser at a wavelength of 532 nm and a pulse duration of 5 ns, in a cell at ambient pressure and temperature, which is ventilated by filtered air. The number of particles emitted was measured with a Condensation Particle Counter (CPC) and their size with an Engine Exhaust Particle Sizer (or EEPS) for the nano-metric range, and an AEROSIZER (for the micrometric range). The mass and shape of particles were determined by sampling on filters as well as on the different impaction plates of a Low-Pressure Impactor (LPI). Two particle populations were detected: a population of aggregates of primary nano-particles with an electrical mobility diameter ranging from 30 to 150 nm, and a population of spherical submicron particles with an aerodynamic diameter ranging from 400 to 1000 nm. The spherical particles are mainly composed of titanium dioxide, and the aggregates most likely of carbon. The presence of two types of particles with different size distributions, shapes, and chemical compositions, implies that particles originating from the ablation of paint are formed by two different mechanisms: agglomeration in the case of the nano-metric aggregates, which is preceded by steps of nucleation, condensation, and coagulation of the primary particles, while the submicron spheres result from a direct ejection mechanism. (authors)

Desarrollo de materiales multimedia libres de carácter enciclopédico: del aula a Wikimedia Commons

OpenAIRE

Gutiérrez Madroñal, Lorena; Gómez Fontanills, David; Collado Machucha, José Carlos; Palomo Duarte, Manuel

2013-01-01

Wikipedia es el proyecto colaborativo más grande desarrollado por el ser humano. Es una enciclopedia libre con más de 20 millones de artículos con miles de fotografías, ilustraciones y elementos multimedia. En este artículo presentamos la experiencia desarrollada en la Universidad de Cádiz dentro de la iniciativa wikiARS, que tiene por objetivo involucrar al alumnado de titulaciones relacionadas con arte y diseño en el desarrollo de obras multimedia para Wikimedia Commons, el repositorio de a...

Acción colectiva de jóvenes en Manizales: colectivo muros libres, acciones de muralismo urbano

OpenAIRE

Franco Jaramillo, Paula Milena

2017-01-01

Tesis (Maestría en Educación y Desarrollo Humano). Universidad de Manizales. Facultad de Ciencias Sociales y Humanas. CINDE, 2016 “Acción colectiva de jóvenes en Manizales: colectivo muros libres, acciones de muralismo urbano”, es un trabajo de investigación surgida en el marco de la Convocatoria 543 de COLCIENCIAS Tema "Consolidación de la Democracia, la Paz y la Reconciliación”; específicamente hace parte del proyecto Colciencias “Acción Colectiva de jóvenes en Bogotá”, di...

Diseño de un cuadricóptero de bajo coste basado en herramientas de software libre

OpenAIRE

Ciudad Gómez, Rubén

2016-01-01

El presente proyecto tiene como objetivo la realización de un cuadricóptero de bajo coste desarrollado con herramientas de software libre, con el fin de permitir el acceso y modificación del mismo a cualquiera que posea los conocimientos necesarios. Los cuadricópteros se definen como un vehículo aéreo no tripulado con cuatro rotores en los extremos. Los ejemplos existentes de estos tipos de vehículos son casi siempre de grandes cuadricópteros, los cuales utilizan diferentes tecnologías en ...

Report of International NanoSPD Steering Committee and statistics on recent NanoSPD activities

International Nuclear Information System (INIS)

Valiev, R Z; Langdon, T G

2014-01-01

Abstract. The Université de Lorraine in Metz, France, is the selected site for the 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD6) following a series of five earlier conferences. This introductory paper reports on several major developments in NanoSPD activities as well as on very recent NanoSPD citation data which confirm the continued growth and expansion of this important research area. Close attention is given to the topics of workshops, conferences and seminars organized during these last three years as well as on books and reviews published prior to the NanoSPD6 conference. A special concern of the committee is in introducing and discussing the appropriate terminology to be applied in this new field of materials science and engineering

TRANSFORMATIONS IN NANO-DIAMONDS WITH FORMATION OF NANO-POROUS SILICON CARBIDE AT HIGH PRESSURE

Directory of Open Access Journals (Sweden)

V. N. Kovalevsky

2010-01-01

Full Text Available The paper contains investigations on regularities of diamond - silicon carbide composite structure formation at impact-wave excitation. It has been determined that while squeezing a porous blank containing Si (SiC nano-diamond by explosive detonation products some processes are taking place such as diamond nano-particles consolidation, reverse diamond transition into graphite, fragments formation from silicon carbide. A method for obtaining high-porous composites with the presence of ultra-disperse diamond particles has been developed. Material with three-dimensional high-porous silicon-carbide structure has been received due to nano-diamond graphitation at impact wave transmission and plastic deformation. The paper reveals nano-diamonds inverse transformation into graphite and its subsequent interaction with the silicon accompanied by formation of silicon-carbide fragments with dimensions of up to 100 nm.

Actividades físico-recreativas para la ocupación del tiempo libre de los adolescentes comprendidos en la edad de 12 a 15 años pertenecientes a la circunscripción # 124 del Reparto 26 de julio, Consejo Popular Hermanos Cruz

Directory of Open Access Journals (Sweden)

Alexis Rodríguez Madera

2009-12-01

Full Text Available La investigación está encaminada a realizar un estudio sobre el aprovechamiento del tiempo libre de los adolescentes de la circunscripción # 124 del Reparto 26 de julio del Consejo Popular Hermanos Cruz. Con la misma se propone un sistema de acciones físicos – recreativos a partir de la participación consciente de los adolescentes para mejorar el aprovechamiento del tiempo libre de estos. Teniendo en cuenta que el tiempo libre constituye una condición obligatoria en la reproducción espiritual ampliada de la personalidad en aras de contribuir a su completo desarrollo físico e intelectual y las actividades físico recreativas son aquellas de carácter físico, deportivo, o turístico a los cuales el hombre le dedica voluntariamente en su tiempo libre para el desarrollo activo, diversión y desarrollo individual, teniendo como objetivo principal la satisfacción de necesidades de movimiento del hombre para lograr como resultado final salud y alegría. Es por tanto, que a partir del diagnóstico realizado en la circunscripción y detectados los problemas de las necesidades del aprovechamiento del tiempo libre de los adolescentes nos propusimos esta investigación con el fin de promover un uso útil del tiempo libre de estos. La planificación, programación y el éxito de estas actividades dependen en gran medida de la edad de los participantes, los gustos e intereses de estos así como la cultura requerida para su realización. La programación y ofertas es de la preferencia de la sociedad, a fin de que responda a los intereses comunes e individuales, lo cual tributa a la conservación del carácter motivacional y recreativo.

Issues in nano technologies for Australia

International Nuclear Information System (INIS)

Tegart, G.

2007-01-01

The Australian Government in late 2005 created a National Nano technology Taskforce that produced a paper, 'Options for a National Nano technology Strategy', in November last year. As an input to the National Nano technology Strategy Taskforce, in early 2006 the National Academies Forum was contracted by the Department of Industry, Tourism and Resources to produce a report Environmental, Social, Legal and Ethical Aspects of the Development of Nano technologies in Australia (which is available at www.naf.org.au/symposia). The report drew on the expertise of Fellows from the four academies in workshops in Melbourne and Sydney and from discussions with other experts, and expressed its outcomes as a set of opinions to assist in developing guidelines for a National Nano technology Strategy

Nano-composite materials

Science.gov (United States)

Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland

2010-05-25

Nano-composite materials are disclosed. An exemplary method of producing a nano-composite material may comprise co-sputtering a transition metal and a refractory metal in a reactive atmosphere. The method may also comprise co-depositing a transition metal and a refractory metal composite structure on a substrate. The method may further comprise thermally annealing the deposited transition metal and refractory metal composite structure in a reactive atmosphere.

Nano Mechanical Machining Using AFM Probe

Science.gov (United States)

Mostofa, Md. Golam

Complex miniaturized components with high form accuracy will play key roles in the future development of many products, as they provide portability, disposability, lower material consumption in production, low power consumption during operation, lower sample requirements for testing, and higher heat transfer due to their very high surface-to-volume ratio. Given the high market demand for such micro and nano featured components, different manufacturing methods have been developed for their fabrication. Some of the common technologies in micro/nano fabrication are photolithography, electron beam lithography, X-ray lithography and other semiconductor processing techniques. Although these methods are capable of fabricating micro/nano structures with a resolution of less than a few nanometers, some of the shortcomings associated with these methods, such as high production costs for customized products, limited material choices, necessitate the development of other fabricating techniques. Micro/nano mechanical machining, such an atomic force microscope (AFM) probe based nano fabrication, has, therefore, been used to overcome some the major restrictions of the traditional processes. This technique removes material from the workpiece by engaging micro/nano size cutting tool (i.e. AFM probe) and is applicable on a wider range of materials compared to the photolithographic process. In spite of the unique benefits of nano mechanical machining, there are also some challenges with this technique, since the scale is reduced, such as size effects, burr formations, chip adhesions, fragility of tools and tool wear. Moreover, AFM based machining does not have any rotational movement, which makes fabrication of 3D features more difficult. Thus, vibration-assisted machining is introduced into AFM probe based nano mechanical machining to overcome the limitations associated with the conventional AFM probe based scratching method. Vibration-assisted machining reduced the cutting forces

Characterization and H2-O2 reactivity of noble nano-metal tailored single wall nano-carbons

International Nuclear Information System (INIS)

K Kaneko; T Itoh; E Bekyarova; H Kanoh; S Utsumi; H Tanaka; M Yudasaka; S Iijima; S Iijima

2005-01-01

Full text of publication follows: Single wall carbon nano-tube (SWNT) and single wall carbon nano-horn (SWNH) have nano-spaces in their particles and the nano-spaces become open by oxidation. In particular, SWNH forms a unique colloidal structure which has micropores and meso-pores between the SWNH particles. Although non-treated SWNH colloids have quasi-one dimensional nano-pores [1], oxidized SWNH colloids have both of interstitial and internal nano-pores [2-5]. SWNH colloids show excellent supercritical methane storage ability [6], molecular sieving effect [7], and unique hydrogen adsorption characteristic [8]. Selective adsorptivity of SWNH colloids for H 2 and D 2 due to uncertainty principle of those molecules was shown [9-10]. As SWNH has no metallic impurities, we can study the effect of tailoring of metallic nano-particles on the surface activities of SWNH [11]. We tailored Pd or Pt nano-particles on SWNH and SWNH oxidized at 823 K (ox-SWNH) using poly[(2-oxo-pyrrolidine-1-yl)ethylene]. The oxidation of SWNH donates nano-scale windows to the single wall. The tailored metal amount was determined by TG analysis. TEM showed uniform dispersion of nano-metal particles of 2-3 nm in the diameter on SWNH. The nitrogen adsorption amount of SWNH oxidized decreases by tailoring, indicating that nano-particles are attached to the nano-scale windows. The electronic states of tailored metals were characterized by X-ray photoelectron spectroscopy. The surface activities of Pd tailored SWNH and ox-SWNH were examined for the reaction of hydrogen and oxygen near room temperature. The catalytic reactivities of Pd tailored SWNH and ox-SWNH were 4 times greater than that of Pd-dispersed activated carbon. The temperature dependence of the surface activity will be discussed with the relevance to the tube porosity. References [1] T. Ohba et al, J. Phys. Chem. In press. [2] S. Utsumi et al, J. Phys. Chem. In press. [3] C.- Min Yang, et al. Adv. Mater. In press. [4]C.M. Yang, J

Cuantificación del riesgo de incumplimiento en créditos de libre inversión: un ejercicio econométrico para una entidad bancaria del municipio de Popayán, Colombia

OpenAIRE

Fabián Enrique Salazar Villano

2013-01-01

Este documento aborda el estudio del riesgo de crédito como un objetivo de la regulación bancaria moderna, partiendo de la teoría económica hasta llegar a una aproximación cuantitativa concreta. En este sentido, se plantean 2 modelos econométricos para una institución bancaria representativa en la cartera de libre inversión en el municipio de Popayán, Departamento del Cauca (Colombia), con los cuales se logra demostrar que su cartera de libre inversión es de bajo riesgo, aun bajo ciertas cara...

Development of novel nano-composite membranes as introduction systems for mass spectrometers: Contrasting nano-composite membranes and conventional inlet systems

Science.gov (United States)

Miranda, Luis Diego

This dissertation presents the development of novel nano-composite membranes as introduction systems for mass spectrometers. These nano-composite membranes incorporate anodic aluminum oxide (AAO) membranes as templates that can be used by themselves or modified by a variety of chemical deposition processes. Two types of nano-composite membranes are presented. The first nano-composite membrane has carbon deposited within the pores of an AAO membrane. The second nano-composite membrane is made by coating an AAO membrane with a thin polymer film. The following chapters describe the transmission properties these nano-composite membranes and compare them to conventional mass spectrometry introduction systems. The nano- composite membranes were finally coupled to the inlet system of an underwater mass spectrometer revealing their utility in field deployments.

Dynamic probabilistic material flow analysis of nano-SiO2, nano iron oxides, nano-CeO2, nano-Al2O3, and quantum dots in seven European regions.

Science.gov (United States)

Wang, Yan; Nowack, Bernd

2018-04-01

Static environmental exposure assessment models based on material flow analysis (MFA) have previously been used to estimate flows of engineered nanomaterials (ENMs) to the environment. However, such models do not account for changes in the system behavior over time. Dynamic MFA used in this study includes the time-dependent development of the modelling system by considering accumulation of ENMs in stocks and the environment, and the dynamic release of ENMs from nano-products. In addition, this study also included regional variations in population, waste management systems, and environmental compartments, which subsequently influence the environmental release and concentrations of ENMs. We have estimated the flows and release concentrations of nano-SiO 2 , nano-iron oxides, nano-CeO 2 , nano-Al 2 O 3 , and quantum dots in the EU and six geographical sub-regions in Europe (Central Europe, Northern Europe, Southern Europe, Eastern Europe, South-eastern Europe, and Switzerland). The model predicts that a large amount of ENMs are accumulated in stocks (not considering further transformation). For example, in the EU 2040 Mt of nano-SiO 2 are stored in the in-use stock, 80,400 tonnes have been accumulated in sediments and 65,600 tonnes in natural and urban soil from 1990 to 2014. The magnitude of flows in waste management processes in different regions varies because of differences in waste handling. For example, concentrations in landfilled waste are lowest in South-eastern Europe due to dilution by the high amount of landfilled waste in the region. The flows predicted in this work can serve as improved input data for mechanistic environmental fate models and risk assessment studies compared to previous estimates using static models. Copyright © 2018 Elsevier Ltd. All rights reserved.

Functionalized Multi walled Carbon Nano tubes-Reinforced Viny lester/Epoxy Blend Based Nano composites: Enhanced Mechanical, Thermal, and Electrical Properties

International Nuclear Information System (INIS)

Praharaj, A. P.; Behera, D.; Bastia, T. K.; Rout, A. K.

2015-01-01

This paper presents a study on the mechanical, thermal, and electrical characterization of a new class of low cost multiphase nano composites consisting of Vinyl ester resin/epoxy (VER/EP) blend (40:60 w/w) reinforced with amine functionalized multi walled carbon nano tubes (f-MWCNTs). Five different sets of VER/EP nano composites are fabricated with addition of 0, 1, 3, 5, and 7 wt.% of f-MWCNTs. A detailed investigation of mechanical properties like tensile strength, impact strength, Young’s modulus, and hardness, thermal properties like thermogravimetric analysis (TGA) and thermal conductivity, electrical properties like dielectric strength, dielectric constant, and electrical conductivity, and corrosive and swelling properties of the nano composites has been carried out. Here, we report significant improvement in all the above properties of the fabricated nano composites with nano filler (f-MWCNTs) addition compared to the virgin blend (0 wt. nano filler loading). The properties are best observed in case of 5 wt.% nano filler loading with gradual deterioration thereafter which may be due to the nucleating tendency of the nano filler particles. Thus the above nano composites could be a preferable candidate for a wide range of structural, thermal, electrical, and solvent based applications.

La aplicación privada del derecho antitrust y la indemnización de los daños derivados de ilícitos contra la libre competencia II Parte: La trasgresión de las normas de libre competencia como fundamento de la responsabilidad civil.

Directory of Open Access Journals (Sweden)

Ingrid Soraya Ortiz Baquero

2008-06-01

Full Text Available El presente estudio tuvo como origen la investigación realizada sobre ¨La prohibición de los acuerdos restrictivos de la competencia y la valoración de las cláusulas de exclusividad en los regímenes de libre competencia europeo, español y colombiano¨, cuya primera y segunda parte se encuentran publicadas en esta revista. En razón de lo anterior, existen entre los dos estudios y sus publicaciones derivadas algunos puntos en común, teniendo en todo caso el presente trabajo adiciones de carácter complementario y una orientación diferente. El artículo que ahora se presenta pretende descubrir y destacar los relaciones entre el Derecho de Daños y el Derecho Anti trust, para lo cual se ha estimado necesario dividir la materia en dos partes: una primera parte presenta la evolución de los sistemas de aplicación de las normas de libre competencia, haciendo especial énfasis en proceso de privatización, para luego ahondar en una segunda parte, -que será publicado en forma independiente- el tema de la responsabilidad civil derivada de los ilícitos anti trust.

Minimum ignition energy of nano and micro Ti powder in the presence of inert nano TiO₂ powder.

Science.gov (United States)

Chunmiao, Yuan; Amyotte, Paul R; Hossain, Md Nur; Li, Chang

2014-06-15

The inerting effect of nano-sized TiO2 powder on ignition sensitivity of nano and micro Ti powders was investigated with a Mike 3 apparatus. "A little is not good enough" is also suitable for micro Ti powders mixed with nano-sized solid inertants. MIE of the mixtures did not significantly increase until the TiO2 percentage exceeded 50%. Nano-sized TiO2 powders were ineffective as an inertant when mixed with nano Ti powders, especially at higher dust loadings. Even with 90% nano TiO2 powder, mixtures still showed high ignition sensitivity because the statistic energy was as low as 2.1 mJ. Layer fires induced by ignited but unburned metal particles may occur for micro Ti powders mixed with nano TiO2 powders following a low level dust explosion. Such layer fires could lead to a violent dust explosion after a second dispersion. Thus, additional attention is needed to prevent metallic layer fires even where electric spark potential is low. In the case of nano Ti powder, no layer fires were observed because of less flammable material involved in the mixtures investigated, and faster flame propagation in nanoparticle clouds. Copyright © 2014 Elsevier B.V. All rights reserved.

Sustainable green urban planning: the Green Credit Tool

NARCIS (Netherlands)

Cilliers, E.J.; Diemont, E.; Stobbelaar, D.J.; Timmermans, W.

2010-01-01

Purpose – The Green Credit Tool is evaluated as a method to quantify the value of green-spaces and to determine how these green-space-values can be replaced or compensated for within urban spatial planning projects. Design/methodology/approach – Amersfoort Local Municipality created the Green Credit

Fungal Microbiomes Associated with Green and Non-Green Building Materials.

Science.gov (United States)

Coombs, Kanistha; Vesper, Stephen; Green, Brett J; Yermakov, Mikhail; Reponen, Tiina

2017-01-01

Water-damaged buildings can lead to fungal growth and occupant health problems. Green building materials, derived from renewable sources, are increasingly utilized in construction and renovations. However, the question as to what fungi will grow on these green compared to non-green materials, after they get wet, has not been adequately studied. By determining what fungi grow on each type of material, the potential health risks can be more adequately assessed. In this study, we inoculated green and non-green pieces of ceiling tile, composite board, drywall, and flooring with indoor dust containing a complex mixture of naturally occurring fungi. The materials were saturated with water and incubated for two months in a controlled environment. The resulting fungal microbiomes were evaluated using ITS amplicon sequencing. Overall, the richness and diversity of the mycobiomes on each pair of green and non-green pieces were not significantly different. However, different genera dominated on each type of material. For example, Aspergillus spp. had the highest relative abundance on green and non-green ceiling tiles and green composite boards, but Peniophora spp. dominated the non-green composite board. In contrast, Penicillium spp. dominated green and non-green flooring samples. Green gypsum board was dominated by Phialophora spp. and Stachybotrys spp., but non-green gypsum board by Myrothecium spp. These data suggest that water-damaged green and non-green building materials can result in mycobiomes that are dominated by fungal genera whose member species pose different potentials for health risks.

Corporate contribution to free software as socially responsible activity La contribución empresarial al software libre como actividad socialmente responsable

Directory of Open Access Journals (Sweden)

Jesús García García

2013-03-01

Full Text Available Firms' commitment to openness on software development means sharing technology and resources with communities worldwide to mitigate the digital divide, create economic opportunity, and foster equal access to technology. Opening up a technology allows others to contribute innovations that individual local companies might never have devised on their own. Consequently, free software development could be seen as a matter of social responsibility. An adequate level of reporting could enhance corporate contributions to free software projects.El compromiso empresarial con la apertura y libertad en el desarrollo de software significa compartir tecnología y recursos con comunidades de todo el planeta y así contribuir a la reducción de la brecha digital, crear nuevas oportunidades de negocio y promover la igualdad de oportunidades en el acceso a la tecnología. Liberar una tecnología permite generar innovaciones que de otro modo las compañías locales no habrían podido desarrollar. En consecuencia, el desarrollo de software libre debe ser visto como una actividad socialmente responsable. Un adecuado nivel de reconocimiento en los informes corporativos podría estimular las aportaciones empresariales a los proyectos de software libre.

Large-scale nanofabrication of periodic nanostructures using nanosphere-related techniques for green technology applications (Conference Presentation)

Science.gov (United States)

Yen, Chen-Chung; Wu, Jyun-De; Chien, Yi-Hsin; Wang, Chang-Han; Liu, Chi-Ching; Ku, Chen-Ta; Chen, Yen-Jon; Chou, Meng-Cheng; Chang, Yun-Chorng

2016-09-01

Nanotechnology has been developed for decades and many interesting optical properties have been demonstrated. However, the major hurdle for the further development of nanotechnology depends on finding economic ways to fabricate such nanostructures in large-scale. Here, we demonstrate how to achieve low-cost fabrication using nanosphere-related techniques, such as Nanosphere Lithography (NSL) and Nanospherical-Lens Lithography (NLL). NSL is a low-cost nano-fabrication technique that has the ability to fabricate nano-triangle arrays that cover a very large area. NLL is a very similar technique that uses polystyrene nanospheres to focus the incoming ultraviolet light and exposure the underlying photoresist (PR) layer. PR hole arrays form after developing. Metal nanodisk arrays can be fabricated following metal evaporation and lifting-off processes. Nanodisk or nano-ellipse arrays with various sizes and aspect ratios are routinely fabricated in our research group. We also demonstrate we can fabricate more complicated nanostructures, such as nanodisk oligomers, by combining several other key technologies such as angled exposure and deposition, we can modify these methods to obtain various metallic nanostructures. The metallic structures are of high fidelity and in large scale. The metallic nanostructures can be transformed into semiconductor nanostructures and be used in several green technology applications.

Corrosion behaviour and galvanic coupling of titanium and welded titanium in LiBr solutions

International Nuclear Information System (INIS)

Blasco-Tamarit, E.; Igual-Munoz, A.; Garcia Anton, J.; Garcia-Garcia, D.

2007-01-01

Corrosion resistance and galvanic coupling of Grade 2 commercially pure titanium in its welded and non-welded condition were systematically analyzed in LiBr solutions. Galvanic corrosion was evaluated through two different methods: anodic polarization (according to the Mixed Potential Theory) and electrochemical noise (using a zero-resistance ammeter). Samples have been etched to study the microstructure. The action of lithium chromate as corrosion inhibitor has been evaluated. Titanium and welded titanium showed extremely low corrosion current densities and elevated pitting potential values (higher than 1 V). The results of both methods, anodic polarization and electrochemical noise, showed that the welded titanium was always the anodic element of the pair titanium-welded titanium, so that its corrosion resistance decreases due to the galvanic effect

Investigation on Nano composite Membrane of Multi walled Carbon Nano tube Reinforced Polycarbonate Blend for Gas Separation

International Nuclear Information System (INIS)

Kausar, A.

2016-01-01

Carbon nano tube has been explored as a nano filler in high performance polymeric membrane for gas separation. In this regard, nano composite membrane of polycarbonate (PC), poly(vinylidene fluoride-co-hexafluoropropylene) (PVFHFP), and multi walled carbon nano tube (MWCNT) was fabricated via phase inversion technique. Poly (ethylene glycol) (PEG) was employed for the compatibilization of the blend system. Two series of PC/PVFHFP/PEG were developed using purified P-MWCNT and acid functional A-MWCNT nano filler. Scanning and transmission electron micrographs have shown fine nano tube dispersion and wetting by matrix, compared with the purified system. Tensile strength and Young s modulus of PC/PVFHFP/PEG/MWCNT-A 1-5 were found to be in the range of 63.6-72.5 MPa and 110.6-122.1 MPa, respectively. The nano composite revealed 51% increase in Young s modulus and 28% increase in tensile stress relative to the pristine blend. The A-MWCNT was also effective in enhancing the perm selectivity αCO 2 /N 2 (31.2-39.9) of nano composite membrane relative to the blend membrane (21.6). The permeability ρCO 2 of blend was 125.6 barrer; however, the functional series had enhancedρCO 2 values ranging from 142.8 to 186.6 barrer. Moreover, A-MWCNT loading improved the gas diffusivity of PC/PVFHFP/PEG/MWCNT-A 1-5; however, filler content did not significantly influence the CO 2 and N 2 solubility.

The Nano Solar Case

DEFF Research Database (Denmark)

Hollensen, Svend; Lindgren, Peter

2011-01-01

ISO PAINT Nordic A/S produces roof coatings, facade painting as well as specialised products for surface treatments. The company decided that they would develop a nano solar ICT based project having the capacity to change the whole cost structure of a building, for example by a nano roof coating...

Optiske nano-fibre

DEFF Research Database (Denmark)

Rubahn, Horst-Günter; Simonsen, Adam Cohen

2003-01-01

Forskere ved Syddansk Universitet har udviklet organiske nano-aggregater, som gør det muligt under meget kontrollerede forhold at studere optiske fænomener på skalaer mindre end lysets bølgelængde.......Forskere ved Syddansk Universitet har udviklet organiske nano-aggregater, som gør det muligt under meget kontrollerede forhold at studere optiske fænomener på skalaer mindre end lysets bølgelængde....

Nano-Fiber Reinforced Enhancements in Composite Polymer Matrices

Science.gov (United States)

Chamis, Christos C.

2009-01-01

Nano-fibers are used to reinforce polymer matrices to enhance the matrix dependent properties that are subsequently used in conventional structural composites. A quasi isotropic configuration is used in arranging like nano-fibers through the thickness to ascertain equiaxial enhanced matrix behavior. The nano-fiber volume ratios are used to obtain the enhanced matrix strength properties for 0.01,0.03, and 0.05 nano-fiber volume rates. These enhanced nano-fiber matrices are used with conventional fiber volume ratios of 0.3 and 0.5 to obtain the composite properties. Results show that nano-fiber enhanced matrices of higher than 0.3 nano-fiber volume ratio are degrading the composite properties.

NanoRiskCat: a conceptual tool for categorization and communication of exposure potentials and hazards of nanomaterials in consumer products

DEFF Research Database (Denmark)

Hansen, Steffen Foss; Baun, Anders

2014-01-01

and exposure potential of consumer products containing engineered nanomaterials. The final outcome of NanoRiskCat is communicated in the form of a short-title describing the intended use and five colored dots. The first three dots refer to the qualitative exposure potential for professional end......-users, consumers and the environment, whereas the last two refers to the hazard potential for humans and the environment. Each dot can be assigned one of four different colors, i.e. red, yellow, green, and gray indicating high, medium, low, and unknown, respectively. In this paper, we first introduce the criteria...... used to evaluate the exposure potential and the human and environmental hazards of specific uses of the nanoproduct. We then apply NanoRiskCat to eight different nanoproducts. The human and environmental exposure potential was found to be high (i.e., red) for many of the products due to direct...

EPR dosimetric properties of nano-barium sulfate

International Nuclear Information System (INIS)

Aboelezz, E.; Hassan, G.M.; Sharaf, M.A.; El-Khodary, A.

2015-01-01

Nano/micro BaSO 4 were prepared through the co-precipitation method to measure ionizing radiation doses using electron paramagnetic resonance (EPR). The nano-BaSO 4 sample was characterized using X-ray diffraction (XRD), and transmission electron microscopy (TEM) techniques. The dose response and fading properties of nano- and micro-phase BaSO 4 were compared in EPR spectra. The prepared nano- and micro-BaSO 4 samples have the same hole and electron centers, which may be attributed to SO 4 − and SO 3 − , respectively. The dosimetric signals for prepared nano- and micro-BaSO 4 have spectroscopic splitting factor (g) with values 2.0025±0.0006 and 2.0027±0.0006, respectively. The nanocrystalline sample has a linear γ-ray dose response over the range 0.4 Gy–1 kGy. The performance parameters which including detection limit and critical level calculated from weighted and unweighted least-squares fitting. The sensitivity of nano-BaSO 4 to γ-ray is one and a half times more than alanine. The lifetime and activation energy for nano-BaSO 4 were estimated by conducting a thermal stability study, and were 5.7±1.1×10 4 years and 0.73±0.14 eV, respectively. The combined and expanded uncertainties accompanying measurements were ±3.89% and ±7.78%, respectively. - Highlights: • Preparation of nano-BaSO 4 using the co-precipitation method. • Study of the dosimetric properties of nano-barium sulfate using the EPR technique. • Comparison between a new EPR dosimeter using nano-materials and standard alanine. • Calculation of the uncertainty budget for nano-BaSO 4

Interaction of NANOS2 and NANOS3 with different components of the CNOT complex may contribute to the functional differences in mouse male germ cells

Directory of Open Access Journals (Sweden)

Atsushi Suzuki

2014-11-01

Full Text Available NANOS2 and NANOS3 belong to the Nanos family of proteins that contain a conserved zinc finger domain, which consists of two consecutive CCHC-type zinc finger motifs, and contribute to germ cell development in mice. Previous studies indicate that there are redundant and distinct functions of these two proteins. NANOS2 rescues NANOS3 functions in the maintenance of primordial germ cells, whereas NANOS3 fails to replace NANOS2 functions in the male germ cell pathway. However, the lack of a conditional allele of Nanos3 has hampered delineation of each contribution of NANOS2 and NANOS3 to the male germ cell pathway. In addition, the molecular mechanism underlying the distinct functions of these proteins remains unexplored. Here, we report an unexpected observation of a transgenic mouse line expressing a NANOS2 variant harboring mutations in the zinc finger domain. Transcription of Nanos2 and Nanos3 was strongly compromised in the presence of this transgene, which resulted in the mimicking of the Nanos2/Nanos3 double-null condition in the male gonad. In these transgenic mice, P-bodies involved in RNA metabolism had disappeared and germ cell differentiation was more severely affected than that in Nanos2-null mice, indicating that NANOS3 partially substitutes for NANOS2 functions. In addition, similar to NANOS2, we found that NANOS3 associated with the CCR4-NOT deadenylation complex but via a direct interaction with CNOT8, unlike CNOT1 in the case of NANOS2. This alternate interaction might account for the molecular basis of the functional redundancy and differences in NANOS2 and NANOS3 functions.

Core-shell architectures as nano-size transporters

International Nuclear Information System (INIS)

Adeli, M.; Zarnegar, Z.; Kabiri, R.; Salimi, F.; Dadkah, A.

2006-01-01

Core-shell architectures containing poly (ethylene imine) (PEI) as a core and poly (lactide) (PLA) as arms were prepared. PEI was used as macro initiator for ring opening polymerization of lactide. PEI-PLA core-shell architectures were able to encapsulate guest molecules. Size of the core-shell architectures was between 10- 100 nm, hence they can be considered as nano carriers to transport the guest molecules. Transport capacity of nano carriers depends on their nano-environments and type of self-assembly in solvent. In solid state nano carriers self-assemble as long structures with nano-size diameter or they form network structures. Aggregations type depends on the concentration of nano carriers in solution. Effect of the shell thickness and aggregation type on the release rate are also investigated

Cementerio: lugar de memoria y museo al aire libre. Educación patrimonial en el ámbito escolar

OpenAIRE

Jenny González Muñoz

2017-01-01

El presente artículo pertenece a una propuesta en desarrollo, expresado con el objetivo de mostrar la importancia de incluir en la escuela el estudio del cementerio como lugar de memoria y museo al aire libre que permita comprender perspectivas del arte y simbolismo como sentido de pertenencia social hacia su salvaguarda, conservación y preservación. La metodología cualtitativo-interpretativa con observación directa, apoyo fotográfico y documental aborda el rol protagónico del cementerio como...

Libre comercio, medio ambiente y ecotributación. Reflexiones sobre el ACA/TLCAN, TLCUEM y ALCA (Tema Central)

OpenAIRE

Figueroa Neri, Aimée

2004-01-01

Este trabajo tiene por objeto estudiar los aspectos ambientales y ecotributarios de los dos principales acuerdos en materia de libre comercio que ha suscrito México (TLCAN y TLCUEM). La consideración que se hace en estos acuerdos del desarrollo sostenible y de los instrumentos económicos con fines de protección ambiental ha impactado en la política y legislación ambiental mexicana. Este impacto ha alcanzado incluso al ordenamiento tributario que ha comenzado a incorporar la finalidad de prote...

Cobalt doped antimony oxide nano-particles based chemical sensor and photo-catalyst for environmental pollutants

Energy Technology Data Exchange (ETDEWEB)

Jamal, Aslam [Centre for Advanced Materials and Nano-Engineering (CAMNE) and Department of Chemistry, Faculty of Sciences and Arts, Najran University, P. O. Box 1988, Najran 11001 (Saudi Arabia); Rahman, Mohammed M. [Center of Excellence for Advanced Materials Research (CEAMR), King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Chemistry Department, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Khan, Sher Bahadar, E-mail: drkhanmarwat@gmail.com [Center of Excellence for Advanced Materials Research (CEAMR), King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Chemistry Department, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Faisal, Mohd. [Centre for Advanced Materials and Nano-Engineering (CAMNE) and Department of Chemistry, Faculty of Sciences and Arts, Najran University, P. O. Box 1988, Najran 11001 (Saudi Arabia); Akhtar, Kalsoom [Division of Nano Sciences and Department of Chemistry, Ewha Womans University, Seoul 120-750 (Korea, Republic of); Rub, Malik Abdul; Asiri, Abdullah M.; Al-Youbi, Abdulrahman O. [Center of Excellence for Advanced Materials Research (CEAMR), King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Chemistry Department, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia)

2012-11-15

Graphical abstract: A dichloromethane chemical sensor using cobalt antimony oxides has been fabricated. This sensor showed high sensitivity and will be a useful candidate for environmental and health monitoring. Also it showed high photo-catalytic activity and can be a good candidate as a photo-catalyst for organic hazardous materials. Highlights: Black-Right-Pointing-Pointer Reusable chemical sensor. Black-Right-Pointing-Pointer Green environmental and eco-friendly chemi-sensor. Black-Right-Pointing-Pointer High sensitivity. Black-Right-Pointing-Pointer Good candidate for environmental and health monitoring. - Abstract: Cobalt doped antimony oxide nano-particles (NPs) have been synthesized by hydrothermal process and structurally characterized by utilizing X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Fourier transforms infrared spectrophotometer (FT-IR) which revealed that the synthesized cobalt antimony oxides (CoSb{sub 2}O{sub 6}) are well crystalline nano-particles with an average particles size of 26 {+-} 10 nm. UV-visible absorption spectra ({approx}286 nm) were used to investigate the optical properties of CoSb{sub 2}O{sub 6}. The chemical sensing of CoSb{sub 2}O{sub 6} NPs have been primarily investigated by I-V technique, where dichloromethane is used as a model compound. The analytical performance of dichloromethane chemical sensor exhibits high sensitivity (1.2432 {mu}A cm{sup -2} mM{sup -1}) and a large linear dynamic range (1.0 {mu}M-0.01 M) in short response time (10 s). The photo catalytic activity of the synthesized CoSb{sub 2}O{sub 6} nano-particles was evaluated by degradation of acridine orange (AO), which degraded 58.37% in 200 min. These results indicate that CoSb{sub 2}O{sub 6} nano-particles can play an excellent research impact in the environmental field.

Comparison on exfoliated graphene nano-sheets and triturated graphite nano-particles for mode-locking the Erbium-doped fibre lasers

Science.gov (United States)

Yang, Chun-Yu; Lin, Yung-Hsiang; Wu, Chung-Lun; Cheng, Chih-Hsien; Tsai, Din-Ping; Lin, Gong-Ru

2018-06-01

Comparisons on exfoliated graphene nano-sheets and triturated graphite nano-particles for mode-locking the Erbium-doped fiber lasers (EDFLs) are performed. As opposed to the graphite nano-particles obtained by physically triturating the graphite foil, the tri-layer graphene nano-sheets is obtained by electrochemically exfoliating the graphite foil. To precisely control the size dispersion and the layer number of the exfoliated graphene nano-sheet, both the bias of electrochemical exfoliation and the speed of centrifugation are optimized. Under a threshold exfoliation bias of 3 volts and a centrifugation at 1000 rpm, graphene nano-sheets with an average diameter of 100  ±  40 nm can be obtained. The graphene nano-sheets with an area density of 15 #/µm2 are directly imprinted onto the end-face of a single-mode fiber made patchcord connector inside the EDFL cavity. Such electrochemically exfoliated graphene nano-sheets show comparable saturable absorption with standard single-graphene and perform the self-amplitude modulation better than physically triturated graphite nano-particles. The linear transmittance and modulation depth of the inserted graphene nano-sheets are 92.5% and 53%, respectively. Under the operation with a power gain of 21.5 dB, the EDFL can be passively mode-locked to deliver a pulsewidth of 454.5 fs with a spectral linewidth of 5.6 nm. The time-bandwidth product of 0.31 is close to the transform limit. The Kelly sideband frequency spacing of 1.34 THz is used to calculate the chirp coefficient as  ‑0.0015.

Green Building Pro-Environment Behaviors: Are Green Users Also Green Buyers?

Directory of Open Access Journals (Sweden)

Xiaohuan Xie

2017-09-01

Full Text Available Pro-environment behaviors play a key role in advancing the development of green buildings. This study investigated the link between two green building pro-environment behaviors that require dissimilar resources: energy savings that do not require money in order to be more environmentally friendly and willingness to pay that involves economic resources including spending money in order to be more environmentally friendly. This study points out that the two pro-environment behaviors can be positively linked to each other. People who behave in an environmentally friendly manner at work would also be likely to pay an extra cost for a green building when buying a new home. The consistency of the two pro-environment behaviors can be explained by their common environmental beliefs: limits to growth and eco-crisis. The green building movement should prioritize pro-environmental behaviors and associated environmental beliefs to support green building policies, guidelines, and tools.

Preparation and characterization of functionalized cellulose nano crystals with methyl adipoyl chloride used to prepare chitosan grafting nano composite

International Nuclear Information System (INIS)

Mesquita, Joao Paulo de; Teixeira, Ivo F.; Donnici, Claudio L.; Pereira, Fabiano V.

2011-01-01

Cellulose nano crystals (CNCs) were prepared from eucalyptus pulp and functionalized with methyl adipoyl chloride. The nano materials were characterized by different techniques including FTIR, 1H NMR and XRD which showed that the functionalization occurs only on the surface of the nano structures without change in crystalline structure of the nanoparticles. The new-functionalized CNCs were used as reinforcement in the preparation of a nano composite with chitosan, through the formation of a covalent bond between the nano filler and matrix. Preliminary results of mechanical tests indicate an improvement in tensile strength and increase in deformation of chitosan. (author)

Nano lasers in photonic VLSI

NARCIS (Netherlands)

Hill, M.T.; Oei, Y.S.; Smit, M.K.

2007-01-01

We examine the use of micro and nano lasers to form digital photonic VLSI building blocks. Problems such as isolation and cascading of building blocks are addressed, and the potential of future nano lasers explored.

Interacción entre las estructuras comerciales y los espacios libres – Comparación de casos: El PAU de Vallecas y la Ciudad de los Ángeles

Directory of Open Access Journals (Sweden)

Jose Francisco Lazarte Castillo

2013-09-01

Full Text Available ResumenEl texto que se presenta a continuación es un trabajo de investigación que contrasta dos barrios periféricos ubicados dentro de Madrid Metropolitana; El PAU de Vallecas situado en el distrito de Villa de Vallecas y la Ciudad de Los Ángeles ubicado en el distrito de Villaverde. Ambos casos, que pertenecen al Plan General de Madrid de 1985 y 1939 respectivamente, son dos tipologías opuestas de barrios, con una morfología urbana distinta a la otra la cual influye notoriamente en el funcionamiento del barrio, en la configuración de los espacios libres y en la distribución, y en algunos casos existencia, de los locales comerciales los cuales son necesarios para obtener dinámicas positivas en el barrio. Se busca identificar los locales comerciales y sus tipologías, como también su relación con los espacios libres y los efectos que causa el binomio comercio – espacio libre.Palabras clave  Madrid, comercio, espacio libre, centro comercial, manzana abierta – cerrada, periferia.AbstractThis article presents a contrast between two neighborhoods situated in the outskirt of Madrid Matropolitana; PAU de Vallecas which belongs to Villa de Vallecas district and Ciudad de los Angeles which belongs to Villaverde district. Both cases, which belong to the Madrid Plan of 1985 and 1939 respectively, are two opposite types of neighborhoods, with differences in the urban morphology, having a remarkable impact on the operation of the district, in the configuration of open spaces and distribution, and in some cases existence of commercial premises which are necessary for positive dynamics in the neighborhood. It seeks to identify the premises and their types, as well as its relationship with open spaces and the effects caused by the binomial commerce - free space.KeywordsMadrid, commercial cores, open space, shopping center, open plot – closed, periphery.  

Color tunable emission through energy transfer from Yb3+ co-doped SrSnO3: Ho3+ perovskite nano-phosphor

Science.gov (United States)

Jain, Neha; Singh, Rajan Kr.; Sinha, Shriya; Singh, R. A.; Singh, Jai

2018-04-01

First time color tunable lighting observed from Ho3+ and Yb3+ co-doped SrSnO3 perovskite. Down-conversion and up-conversion (UC) photoluminescence emission spectra were recorded to understand the whole mechanism of energy migration between Ho3+ and Yb3+ ions. The intensity of green and red emission varies with Yb3+ doping which causes multicolour emissions from nano-phosphor. The intensity of UC red emission (654 nm) obtained from 1 at.% Ho3+ and 3 at.% Yb3+ co-doped nano-phosphor is nine times higher than from 1 at.% Ho3+ doped SrSnO3 nano-phosphor. Enhanced brightness of 654 nm in UC process belongs in biological transparency window so that it might be a promising phosphor in the bio-medical field. Moreover, for the other Yb3+ co-doped nano-phosphor, Commission Internationale de l'Éclairage chromaticity co-ordinates were found near the white region and their CCT values lie in the range 4900-5100 K indicating cool white. Decay time was measured for 545 nm emission of Ho3+ ion found in 7.652 and 8.734 µs at 355 nm excitation. The variation in lifetime was observed in ascending order with increasing Yb3+ concentration which supports PL emission spectra observation that with increasing Yb3+ concentration, rate of transition has changed. These studies reveal that Ho3+ and Yb3+ co-doped phosphor is useful for fabrication of white LEDs.

Biocompatibility and Toxicity of Nano biomaterials 2014

International Nuclear Information System (INIS)

Li, X.; Lee, S.Ch.; Zhang, Sh.; Akasaka, T.

2014-01-01

It is well known that nano materials have developed rapidly over the past few decades. Based on their unique physicochemical properties and special mechanical properties, nano materials have provided application possibility in many different fields. Currently, as nano biomaterials, they are widely used in various biomedical applications, such as drug delivery systems, tissue engineering, dental/bone implant, and biosensors. For example, nano biomaterials have been used in tissue engineering because of their satisfactory bioactivity, high mechanical properties, and large surface area to adsorb specific proteins. Many kinds of nano biomaterials are used to prepare composite scaffolds to get better biocompatibility and higher ability in repairing specific tissues. Several antibacterial metallic nano biomaterials are used to coat implant surfaces to improve the speed of healing fractures. In addition, lots of nano biomaterials have the potential to break the limitations of the traditional delivery systems. They can load larger amount of drugs and provide stable drug release for long time at the targeted sites, such as tumors. Moreover, they can combine with polymers to furnish simultaneous drug delivery systems with the controllable release rate. Besides these applications, more and more nano biomaterials show great potential to be applied as highly sensitive biosensors because they have higher ability in loading firmly or interacting completely with recognition aptamers.

CHF Enhancement in Flow Boiling using Al2O3 Nano-Fluid and Al2O3 Nano-Particle Deposited Tube

International Nuclear Information System (INIS)

Kim, Tae Il; Chun, T. H.; Chang, S. H.

2010-01-01

Nano-fluids are considered to have strong ability to enhance CHF. Most CHF experiments using nano-fluids were conducted in pool boiling conditions. However there are very few CHF experiments with nano-fluids in flow boiling condition. In the present study, flow boiling CHF experiments using bare round tube with Al 2 O 3 nano-fluid and Al 2 O 3 nano-particle deposited tube with DI water were conducted under atmospheric pressure. CHFs were enhanced up to ∼ 80% with Al 2 O 3 nano-fluid and CHFs with Al 2 O 3 nano-particle deposited tube were also enhanced up to ∼ 80%. Inner surface of test section tube were observed by SEM and AFM after CHF experiments

Synthesis of green nano iron particles (GnIP) and their application in adsorptive removal of As(III) and As(V) from aqueous solution

Energy Technology Data Exchange (ETDEWEB)

Prasad, Kumar Suranjit, E-mail: suranjit@gmail.com [Department of Environmental Studies, Faculty of Science, The M. S. University of Baroda, Vadodara, 390002, Gujarat (India); Gandhi, Pooja, E-mail: poojagandhi.3090@gmail.com [Department of Environmental Sciences, Ashok and Rita Patel Institute of Integrated Study and Research in Biotechnology and Allied Sciences (ARIBAS), New Vallabh Vidyanagar, Anand, Gujarat, 388121 (India); Selvaraj, Kaliaperumal, E-mail: k.selvaraj@ncl.res.in [Nano and Computational Materials Lab, Catalysis Division, National Chemical Laboratory, Council of Scientific and Industrial Research, Pune, 411008 (India)

2014-10-30

Graphical abstract: - Highlights: • Colloidal GnIP synthesised using extract of Mint leaves were entrapped in chitosan beads. • GnIP loaded beads were employed for removal of As ions, showed excellent removal efficiency. • Iron and chitosan are cost effective materials hence can be a good adsorbent for removal of arsenic. - Abstract: The present study reports a new approach to synthesise nano iron particles using leaf extract of Mint (Mentha spicata L.) plant. The synthesised GnIPs were subjected to detailed adsorption studies for removal of arsenite and arsenate from aqueous solution of defined concentration. Iron nanoparticles synthesised using leaf extract showed UV–vis absorption peaks at 360 and 430 nm. TEM result showed the formation of polydispersed nanoparticles of size ranging from 20 to 45 nm. Nanoparticles were found to have core–shell structure. The planer reflection of selected area electron diffraction (SAED) and XRD analysis suggested that iron particles were crystalline and belonged to fcc (face centred cubic) type. Energy-dispersive X-ray analysis (EDAX) shows that Fe was an integral component of synthesised nanoparticles. The content of Fe in nanoparticles was found to be 40%, in addition to other elements like C (16%), O (19%) and Cl (23%). FT-IR study suggested that functional groups like -NH, -C=O, -C=N and -C=C were involved in particle formation. The removal efficiency of GnIP-chitosan composite for As(III) and As(V) was found to be 98.79 and 99.65%. Regeneration of adsorbent suggested that synthesised green GnIP may work as an effective tool for removal of arsenic from contaminated water.

Synthesis of green nano iron particles (GnIP) and their application in adsorptive removal of As(III) and As(V) from aqueous solution

International Nuclear Information System (INIS)

Prasad, Kumar Suranjit; Gandhi, Pooja; Selvaraj, Kaliaperumal

2014-01-01

Graphical abstract: - Highlights: • Colloidal GnIP synthesised using extract of Mint leaves were entrapped in chitosan beads. • GnIP loaded beads were employed for removal of As ions, showed excellent removal efficiency. • Iron and chitosan are cost effective materials hence can be a good adsorbent for removal of arsenic. - Abstract: The present study reports a new approach to synthesise nano iron particles using leaf extract of Mint (Mentha spicata L.) plant. The synthesised GnIPs were subjected to detailed adsorption studies for removal of arsenite and arsenate from aqueous solution of defined concentration. Iron nanoparticles synthesised using leaf extract showed UV–vis absorption peaks at 360 and 430 nm. TEM result showed the formation of polydispersed nanoparticles of size ranging from 20 to 45 nm. Nanoparticles were found to have core–shell structure. The planer reflection of selected area electron diffraction (SAED) and XRD analysis suggested that iron particles were crystalline and belonged to fcc (face centred cubic) type. Energy-dispersive X-ray analysis (EDAX) shows that Fe was an integral component of synthesised nanoparticles. The content of Fe in nanoparticles was found to be 40%, in addition to other elements like C (16%), O (19%) and Cl (23%). FT-IR study suggested that functional groups like -NH, -C=O, -C=N and -C=C were involved in particle formation. The removal efficiency of GnIP-chitosan composite for As(III) and As(V) was found to be 98.79 and 99.65%. Regeneration of adsorbent suggested that synthesised green GnIP may work as an effective tool for removal of arsenic from contaminated water

Progress in nano-electro optics characterization of nano-optical materials and optical near-field interactions

CERN Document Server

Ohtsu, Motoichi

2005-01-01

This volume focuses on the characterization of nano-optical materials and optical-near field interactions. It begins with the techniques for characterizing the magneto-optical Kerr effect and continues with methods to determine structural and optical properties in high-quality quantum wires with high spatial uniformity. Further topics include: near-field luminescence mapping in InGaN/GaN single quantum well structures in order to interpret the recombination mechanism in InGaN-based nano-structures; and theoretical treatment of the optical near field and optical near-field interactions, providing the basis for investigating the signal transport and associated dissipation in nano-optical devices. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

Arquitectura Clúster de Alto Rendimiento Utilizando Herramientas de Software Libre

Directory of Open Access Journals (Sweden)

Leonardo Chuquiguanca

2015-05-01

Full Text Available El artículo presenta la implementación de una arquitectura clúster que convierte un laboratorio inicialmente concebido para la eseñanza de la comunidad estudiantil, en una sala de altas prestaciones mediante el uso de herramientas de software libre como: MPICH, Mosix, Blender, Hadoop, Ganglia Monitoring System. Con el clúster se obtiene un rendimiento similar al de un supercomputador, optimizando el tiempo de procesamiento en: simulación de procesos, reconocimiento de patrones, renderizado de imagen y video, análisis de grandes volúmenes de datos Big Data, cifrado de códigos, evaluación de algoritmos, etc. Además, con esta arquitectura se puede procesar millones de operaciones por segundo en los procesos antes mencionados. Este importante avance facilita la investigación académica en otros campos donde se requiera procesar grandes volúmenes de información y obtener resultados en un corto tiempo lo cual permitirá una adecuada toma de decisiones.

IMPACTO DEL TRATADO DE LIBRE COMERCIO ENTRE COLOMBIA Y EEUU, SOBRE EL ACCESO A LOS MEDICAMENTOS EN COLOMBIA

Directory of Open Access Journals (Sweden)

José David Millán Cano

2012-12-01

Full Text Available Este artículo, más que pretender continuar con la franca crítica al Tratado de Libre Comercio (TLC entre Colombia y EE.UU, busca dar una aproximación a las posibles repercusiones que este acuerdo tendrá sobre el acceso a los medicamentos de los afiliados al Sistema General de Seguridad Social en Salud (SGSSS colombiano en  mediano y largo plazo.Para lograr esto, se definirá qué se entiende por Tratado de Libre Comercio, para luego realizar una breve reseña histórica de su evolución. Luego, y para entender un poco la relación que ha unido a Colombia y a EEUU en términos comerciales, se intentará dar un panorama histórico sobre el tema. Se continuará con una descripción de cómo fue el proceso de negociación sin perder de vista los antecedentes y causas de tipo político, económico, y social que motivaron un TLC entre Colombia y EEUU, teniendo en cuenta qué sectores quedaron incluidos en la negociación, qué servicios y con qué condiciones, para luego, evaluar cómo se ve afectado el derecho a la salud y sobre todo el acceso a los medicamentos para los afiliados al SGSSS colombiano a mediano y largo plazo.

In-vitro investigations of skin closure using diode laser and protein solder containing gold nano shells

International Nuclear Information System (INIS)

Nourbakhsh, M. S.; Etrati Khosroshahi, M.

2011-01-01

Laser tissue soldering is a new technique for repair of various tissues including the skin, liver, articular cartilage and nerves and is a promising alternative to suture. To overcome the problems of thermal damage to surrounding tissues and low laser penetration depth, some exogenous chromophores such as gold nano shells, a new class of nanoparticles consisting of a dielectric core surrounded by a thin metal shell, are used. The aims of this study were to use two different concentrations of gold nano shells as the exogenous material for skin tissue soldering and also to examine the effects of laser soldering parameters on the properties of the repaired skin. Material and Methods: Two mixtures of albumin solder and different concentrations of gold nano shells were prepared. A full thickness incision of 2*20 mm 2 was made on the surface and after placing 50 μ1 of the solder mixture on the incision, an 810 nm diode laser was used to irradiate it at different power densities. The changes of tensile strength, σt, due to temperature rise, number of scan (Ns), and scan velocity (Vs) were investigated. Results: The results showed that the tensile strength of the repaired skin increased with increasing irradiance for both gold nano shell concentrations. In addition, at constant laser irradiance (I), the tensile strength of the repaired incision increased with increasing Ns and decreasing Vs. In our case, this corresponded to σt = 1610 g/cm 2 at I ∼ 60 W cm-2, T ∼ 65 d egree C , Ns = 10 and Vs = 0.2 mms-1. Discussion and Conclusion: Gold nano shells can be used as an indocyanine green dye alterative for laser tissue soldering. Although by increasing the laser power density, the tensile strength of the repaired skin increases, an optimum power density must be considered due to the resulting increase in tissue temperature.

One-Dimensional SnO2 Nano structures: Synthesis and Applications

International Nuclear Information System (INIS)

Pan, J.; Shen, H.; Mathur, S.; Pan, J.

2012-01-01

Nano scale semiconducting materials such as quantum dots (0-dimensional) and one-dimensional (1D) structures, like nano wires, nano belts, and nano tubes, have gained tremendous attention within the past decade. Among the variety of 1D nano structures, tin oxide (SnO 2 ) semiconducting nano structures are particularly interesting because of their promising applications in optoelectronic and electronic devices due to both good conductivity and transparence in the visible region. This article provides a comprehensive review of the recent research activities that focus on the rational synthesis and unique applications of 1D SnO 2 nano structures and their optical and electrical properties. We begin with the rational design and synthesis of 1D SnO 2 nano structures, such as nano tubes, nano wires, nano belts, and some heterogeneous nano structures, and then highlight a range of applications (e.g., gas sensor, lithium-ion batteries, and nano photonics) associated with them. Finally, the review is concluded with some perspectives with respect to future research on 1D SnO 2 nano structures

Polymer/Layered Silicate Nano composites

International Nuclear Information System (INIS)

Bakhit, M.E.E.H.

2012-01-01

Polymer–clay nano composites have attracted the attention of many researchers and experimental results are presented in a large number of recent papers and patents because of the outstanding mechanical properties and low gas permeabilities that are achieved in many cases. Polymer-clay nano composites are a new class of mineral-field polymer that contain relatively small amounts (<10%) of nanometer-sized clay particles. Polymer/clay nano composites have their origin in the pioneering research conducted at Toyota Central Research Laboratories and the first historical record goes back to 1987. The matrix was nylon-6 and the filler MMT. Because of its many advantages such as high mechanical properties, good gas barrier, flame retardation, etc. polymer/clay nano composites have been intensely investigated and is currently the subject of many research programs. Nano composite materials are commercially important and several types of products with different shapes and applications including food packaging films and containers, engine parts, dental materials, etc. are now available in markets. A number of synthesis routes have been developed in the recent years to prepare these materials, which include intercalation of polymers or prepolymers from solution, in-situ polymerization, melt intercalation etc. In this study, new nano composite materials were produced from the components of rubber (Nbr, SBR and EPDM) as the polymeric matrix and organically modified quaternary alkylammonium montmorillonite in different contents (3, 5, 7, and 10 phr) as the filler by using an extruder then, the rubber nano composite sheets were irradiated at a dose of 0, 50, 75, 100 and 150 KGy using Electron beam Irradiation technique as a crosslinking agent. These new materials can be characterized by using various analytical techniques including X-ray diffractometer XRD, Thermogravimetric analyzer TGA, scanning electron microscope (SEM), transmission electron microscope (TEM),Fourier transform

Reverse micelle-loaded lipid nano-emulsions: new technology for nano-encapsulation of hydrophilic materials.

Science.gov (United States)

Anton, Nicolas; Mojzisova, Halina; Porcher, Emilien; Benoit, Jean-Pierre; Saulnier, Patrick

2010-10-15

This study presents novel, recently patented technology for encapsulating hydrophilic species in lipid nano-emulsions. The method is based on the phase-inversion temperature method (the so-called PIT method), which follows a low-energy and solvent-free process. The nano-emulsions formed are stable for months, and exhibit droplet sizes ranging from 10 to 200 nm. Hydrophilic model molecules of fluorescein sodium salt are encapsulated in the oily core of these nano-emulsion droplets through their solubilisation in the reverse micellar system. As a result, original, multi-scaled nano-objects are generated with a 'hydrophilic molecule in a reverse-micelles-in-oil-in-water' structure. Once fluorescein has been encapsulated it remains stable, for thermodynamic reasons, and the encapsulation yields can reach 90%. The reason why such complex objects can be formed is due to the soft method used (PIT method) which allows the conservation of the structure of the reverse micelles throughout the formulation process, up to their entrapment in the nano-emulsion droplets. In this study, we focus the investigation on the process itself, revealing its potential and limits. Since the formulation of nanocarriers for the encapsulation of hydrophilic substances still remains a challenge, this study may constitute a significant advance in this field. Copyright 2010 Elsevier B.V. All rights reserved.

Natural convection in nano-fluids: Are the thermophoresis and Brownian motion effects significant in nano-fluid heat transfer enhancement?

International Nuclear Information System (INIS)

Haddad, Zoubida; Abu-Nada, Eiyad; Oztop, Hakan F.; Mataoui, Amina

2012-01-01

Natural convection heat transfer and fluid flow of CuO-Water nano-fluids is studied using the Rayleigh-Benard problem. A two component non-homogenous equilibrium model is used for the nano-fluid that incorporates the effects of Brownian motion and thermophoresis. Variable thermal conductivity and variable viscosity are taken into account in this work. Finite volume method is used to solve governing equations. Results are presented by streamlines, isotherms, nano-particle distribution, local and mean Nusselt numbers and nano-particle profiles at top and bottom side. Comparison of two cases as absence of Brownian and thermophoresis effects and presence of Brownian and thermophoresis effects showed that higher heat transfer is formed with the presence of Brownian and thermophoresis effect. In general, by considering the role of thermophoresis and Brownian motion, an enhancement in heat transfer is observed at any volume fraction of nano-particles. However, the enhancement is more pronounced at low volume fraction of nano-particles and the heat transfer decreases by increasing nano-particle volume fraction. On the other hand, by neglecting the role of thermophoresis and Brownian motion, deterioration in heat transfer is observed and this deterioration elevates by increasing the volume fraction of nano-particles. (authors)

EFICACIA DE LA COMBINACIÓN DEL INJERTO LIBRE DE TEJIDO CONECTIVO Y LA TÉCNICA DE ALLEN EN EL TRATAMIENTO DE LA RECESIÓN GINGIVAL CLASE II DE MILLER EN PACIENTES DE LA CONSULTA PRIVADA. AREQUIPA. 2012

OpenAIRE

LUJAN VALENCIA, SARA

2015-01-01

RECESIÓN GINGIVAL CONCEPTO FACTORES ETIOLÓGICOS SÍNTOMAS CLÍNICOS DIAGNÓSTICO CLASIFICACIÓN DE LA RECESIÓN PAPEL DE LA ENCÍA QUERATINIZADA EN LA CONSERVACIÓN DE LA SALUD GINGIVAL CONDICIONES NECESARIAS PARA EL ÉXITO DEL RECUBRIMIENTO RADICULAR TRATAMIENTO DE LAS RECESIONES GINGIVALES TRATAMIENTO CONSERVADOR TRATAMIENTO QUIRÚRGICO INJERTO LIBRE DE TEJIDO CONECTIVO Y LA TÉCNICO DE ALLEN INJERTO LIBRE DE TEJIDO CONECTIVO TÉCNICA QUIRÚRGICA BIOMODIFICACIÓN DE LA SUPERFICIE RADICULAR TÉCNICA DE AL...

Inorganic fullerene-type WS_2 nanoparticles: processing, characterization and its photocatalytic performance on malachite green

International Nuclear Information System (INIS)

Hazarika, Saurabh Jyoti; Mohanta, Dambarudhar

2017-01-01

In this work, we have employed a hydrothermal route for the synthesis of fullerene-type tungsten disulfide (WS_2) nanoparticles. X-ray diffraction analysis signifies a hexagonal crystal structure of WS_2 with the crystallites experiencing preferred orientations along (002) and (103) planes. The agglomerated nanoparticles and inorganic fullerene (IF)-type structures are apparently observable from the high-resolution electron micrographs. Raman spectrum shows prominent E"1_2_g and A_1_g modes emanating from the IF nano-WS_2 system. The Tauc's plot obtained from the optical absorption data predicts a direct band gap of ∝1.91 eV for the nano-WS_2 system; whereas, photoluminescence analysis reveals a broad emission peak located at ∝638 nm and is ascribed to the associated transition from the indirect to direct nature of the band gap. The photocatalytic decomposition of malachite green (MG) solution (30 mg/l) by WS_2 (100 mg/l) under UV and visible light irradiation has been evaluated. The latter condition exhibited a better photocatalytic response with the MG degradation as high as 71.2%, revealed for 120 min. Photocatalytic and optoelectronic features of IF-type nano-WS_2 would bring new insights not only to resolve issues related to environmental hazards, but also in functional devices of technological relevance. (orig.)

Green thunderstorms

Science.gov (United States)

Gallagher, Frank Woolsey, III

Many people around the world have observed green light apparently emanating from severe thunderstorms, but until recently there has been no scientific study of the phenomenon. Green thunderstorms have been observed from time to time in association with deep convection or severe weather events. Some skeptics who have not personally observed a green thunderstorm suggest that they are some kind of illusion. The existence of green thunderstorms has been objectively demonstrated by recording spectra of light from thunderstorms using a handheld spectrophotometer. During the spring and summer of 1995 and the spring of 1996 numerous storms were observed and spectra of the light emanating from these storms were recorded. Observations were made both at the ground and aboard research aircraft. Furthermore, time series of spectra were recorded as the observed color of some storms changed from dark blue to a bluish-green. Several hypotheses have been advanced to explain the occurrence of green light in connection with severe storms. Fankhauser gave some observational support to the belief that green light from thunderstorms is possible and believed that the source of the light is from the blue sky penetrating thin regions in the clouds. Fraser believes that light from the setting sun, in combination with the process of scattering by atmospheric molecules, creates the green light associated with severe weather and the thunderstorm acts only as a black backdrop. Unfortunately, no cloud illuminated by the sun is black and the green airlight produced by the Fraser theory is in reality overwhelmed by light reflected by the cloud. Often the unusual coloration has been attributed to hail or to reflection of light from foliage on the ground. The quantitative measurements made during the observation period fail to support these assumptions. We have observed thunderstorms to be green over ground that was not green and we have observed blue thunderstorms over ground that was green

Los potenciales impactos del tratado de libre comercio Estados Unidos-Ecuador en el sector agrícola

OpenAIRE

Calvache Peña, Myriam Patricia; Zambrano Illescas, José Sigifredo

2008-01-01

El presente trabajo analiza las ventajas y desventajas, así como los potenciales impactos de la firma del tratado de libre comercio con Estados Unidos, en el sector agrícola ecuatoriano. Se trata de abordar este tema a través de una exposición técnica de datos y de la experiencia internacional existente, lo que lleva a un enfoque más profundo de las grandes asimetrías que se tiene en el país del norte, en donde los agricultores reciben beneficios tanto en la producción como en la exportación,...

Radiation synthesis of the nano-scale materials

Energy Technology Data Exchange (ETDEWEB)

Yonghong, Ni; Zhicheng, Zhang; Xuewu, Ge; Xiangling, Xu [Department of Applied Chemistry, Univ. of Science and Technology of China, Hefei (China)

2000-03-01

Some recent research jobs on fabricating the nano-scale materials via {gamma}-irradiation in our laboratory are simply summarized in this paper. The main contents contain four aspects: (1) the preparation of metal alloy - powders; (2) the fabrication of polymer -metal nano-composites in aqueous solution, micro-emulsion and emulsion systems; (3) the synthesis of metal sulfide nano-particles and (4) the preparation of the ordered nano-structure materials. The corresponding preparation processes are also simply described. (author)

Radiation synthesis of the nano-scale materials

International Nuclear Information System (INIS)

Ni Yonghong; Zhang Zhicheng; Ge Xuewu; Xu Xiangling

2000-01-01

Some recent research jobs on fabricating the nano-scale materials via γ-irradiation in our laboratory are simply summarized in this paper. The main contents contain four aspects: (1) the preparation of metal alloy - powders; (2) the fabrication of polymer -metal nano-composites in aqueous solution, micro-emulsion and emulsion systems; (3) the synthesis of metal sulfide nano-particles and (4) the preparation of the ordered nano-structure materials. The corresponding preparation processes are also simply described. (author)

Polyaniline nanowires on TiO2 nano/microfiber hierarchical nano/microstructures: Preparation and their photocatalytic properties

International Nuclear Information System (INIS)

Yu Qiaozhen; Wang Mang; Chen Hongzheng; Dai Zhengwei

2011-01-01

Highlights: → We fabricate PANI nanowire-on-TiO 2 nano/microfiber hierarchical nano/microstructure composite fiber films by electrospinning, calcinations and in situ polymerization. → PANI/TiO 2 composite fiber film exhibits high photocatalytic activity for the degradation of dye MB. → The photocatalytic activity and reusability of PANI/TiO 2 composite fiber film were lower than those of pure TiO 2 fiber film. - Abstract: TiO 2 /PANI composite fiber films were fabricated by electrospinning, calcinations and in situ polymerization. The morphology and structure of the resulting composites were analyzed by scanning electron micrograph, transmission electron micrograph, Fourier transform infrared spectroscopy and X-ray diffraction. It was found that this composite fiber film has a PANI nanowire-on-TiO 2 nano/microfiber hierarchical nano/microstructure. The surface morphology of this hierarchical nano/microstructure was related to the structure of TiO 2 nano/microfiber film, the time and temperature of in situ polymerization. Its photocatalytic property on methylene blue (MB) was studied, and the results showed that TiO 2 /PANI composite fiber film with this hierarchical nano/microstructure exhibited high photocatalytic activity for the degradation of MB under natural light. But both its photocatalytic activity and reusability were lower than those of pure TiO 2 fiber film. To improve the stability and reusability of TiO 2 /PANI composite fiber film, a direct chemical bonding of PANI chains onto TiO 2 surface, such as, the surface-initiated graft polymerization, is a useful method.