Nanoscale roughness contact in a slider-disk interface

International Nuclear Information System (INIS)

Hua Wei; Liu Bo; Yu Shengkai; Zhou Weidong

2009-01-01

The nanoscale roughness contact between molecularly smooth surfaces of a slider-disk interface in a hard disk drive is analyzed, and the lubricant behavior at very high shear rate is presented. A new contact model is developed to study the nanoscale roughness contact behavior by classifying various forms of contact into slider-lubricant contact, slider-disk elastic contact and plastic contact. The contact pressure and the contact probabilities of the three types of contact are investigated. The new contact model is employed to explain and provide insight to an interesting experimental result found in a thermal protrusion slider. The protrusion budget for head surfing in the lubricant, which is the ideal state for contact recording, is also discussed.

Employer branding

OpenAIRE

Mičková, Kateřina

2008-01-01

The demand for qualified employees is higher then the offering, both in Czech republic and internationally. Demand for specific skills, in addition to a greater demand for workforce generally, is making employee recruitment and retention much more difficult and expensive. Employer Branding claims to be an answer to this new challenge. This international concept focuses on developing an "employer brand" - mental image of a company as an employer. To achieve this, it is necessary to demonstrate...

Which employment interview skills best predict the employability of schizophrenic patients?

Science.gov (United States)

Charisiou, J; Jackson, H J; Boyle, G J; Burgess, P M; Minas, I H; Joshua, S D

1989-06-01

To examine the effects of verbal and nonverbal interview microbehaviors and interview characteristics on employability, Simulated Employment Interviews were conducted with 46 psychiatric inpatients who each met the DSM-III criteria for a diagnosis of schizophrenia. Each interview was videotaped and shown to two raters, who generated independent ratings for six microbehaviors (eye-contact, facial gestures, body posture, verbal content, voice volume, and length of speech) and six subject characteristics (motivation, self-confidence, ability to communicate, manifest adjustment, manifest intelligence and overall interview skill). A panel of three Commonwealth Employment Service psychologists viewed the same videotaped interviews and generated employability ratings. Verbal and nonverbal microbehaviors were relatively independent while subject characteristics were highly interdependent. Microbehaviors and characteristics correlated at a high level. Of the 12 interview microbehaviors and characteristics, manifest adjustment and ability to communicate accounted for 64% of the total variance in predicting employability. Interviewees who were perceived as behaving in an adjusted manner and as being good communicators were rated as more employable.

On multiscale moving contact line theory.

Science.gov (United States)

Li, Shaofan; Fan, Houfu

2015-07-08

In this paper, a multiscale moving contact line (MMCL) theory is presented and employed to simulate liquid droplet spreading and capillary motion. The proposed MMCL theory combines a coarse-grained adhesive contact model with a fluid interface membrane theory, so that it can couple molecular scale adhesive interaction and surface tension with hydrodynamics of microscale flow. By doing so, the intermolecular force, the van der Waals or double layer force, separates and levitates the liquid droplet from the supporting solid substrate, which avoids the shear stress singularity caused by the no-slip condition in conventional hydrodynamics theory of moving contact line. Thus, the MMCL allows the difference of the surface energies and surface stresses to drive droplet spreading naturally. To validate the proposed MMCL theory, we have employed it to simulate droplet spreading over various elastic substrates. The numerical simulation results obtained by using MMCL are in good agreement with the molecular dynamics results reported in the literature.

Corneal cell adhesion to contact lens hydrogel materials enhanced via tear film protein deposition.

Directory of Open Access Journals (Sweden)

Claire M Elkins

Full Text Available Tear film protein deposition on contact lens hydrogels has been well characterized from the perspective of bacterial adhesion and viability. However, the effect of protein deposition on lens interactions with the corneal epithelium remains largely unexplored. The current study employs a live cell rheometer to quantify human corneal epithelial cell adhesion to soft contact lenses fouled with the tear film protein lysozyme. PureVision balafilcon A and AirOptix lotrafilcon B lenses were soaked for five days in either phosphate buffered saline (PBS, borate buffered saline (BBS, or Sensitive Eyes Plus Saline Solution (Sensitive Eyes, either pure or in the presence of lysozyme. Treated contact lenses were then contacted to a live monolayer of corneal epithelial cells for two hours, after which the contact lens was sheared laterally. The apparent cell monolayer relaxation modulus was then used to quantify the extent of cell adhesion to the contact lens surface. For both lens types, lysozyme increased corneal cell adhesion to the contact lens, with the apparent cell monolayer relaxation modulus increasing up to an order of magnitude in the presence of protein. The magnitude of this increase depended on the identity of the soaking solution: lenses soaked in borate-buffered solutions (BBS, Sensitive Eyes exhibited a much greater increase in cell attachment upon protein addition than those soaked in PBS. Significantly, all measurements were conducted while subjecting the cells to moderate surface pressures and shear rates, similar to those experienced by corneal cells in vivo.

New developments in the theory of wheel/rail contact mechanics

DEFF Research Database (Denmark)

Nielsen, Jakob Birkedal

1998-01-01

Today many simulation routines concerning railway dynamics employ rather primitive contact models which are not necessarily suited for the specific wheel/rail contact problem. The objective of the present thesis is to derive a more flexible contact model which can be applied on a variety of conta...

VIA Employability

DEFF Research Database (Denmark)

Andersen, Henrik Mariendal

2017-01-01

’s realized at the entrance to the labor market and in the future career. The purpose is to find opportunities to improve employability-developing activities and to adapt it to specific needs from the students. Based on a number of qualitative interviews and personality tests of the graduates, an increased......The fact that students develop employability during their education is a key point for educational institutions and the focus on this issue has never been greater. This project looks into personal experience from VIA-graduates of "developing their employability" during the education and how it...

Office of Disability Employment Policy

Science.gov (United States)

... STATES DEPARTMENT OF LABOR Facebook Twitter RSS Email Office of Disability Employment Policy (ODEP) Menu About ODEP ... LABOR DEPARTMENT Español A to Z Index Agencies Office of Inspector General Leadership Team Contact Us Subscribe ...

Bacterial Colonization of Disposable Soft Contact Lenses Is Greater during Corneal Infiltrative Events than during Asymptomatic Extended Lens Wear

OpenAIRE

Sankaridurg, Padmaja R.; Sharma, Savitri; Willcox, Mark; Naduvilath, Thomas J.; Sweeney, Deborah F.; Holden, Brien A.; Rao, Gullapalli N.

2000-01-01

Microorganisms, especially gram-negative bacteria, are considered to play a role in the etiology of certain corneal infiltrative events (CIEs) observed during soft contact lens wear. This study explored the possibility of microbial colonization of soft contact lenses as a risk factor leading to CIEs. In a clinical trial conducted from March 1993 to January 1996, 330 subjects wore disposable soft contact lenses on a 6-night extended-wear and disposal schedule. During this period, 4,321 lenses ...

Small cities face greater impact from automation

OpenAIRE

Frank, Morgan R.; Sun, Lijun; Cebrian, Manuel; Youn, Hyejin; Rahwan, Iyad

2017-01-01

The city has proven to be the most successful form of human agglomeration and provides wide employment opportunities for its dwellers. As advances in robotics and artificial intelligence revive concerns about the impact of automation on jobs, a question looms: How will automation affect employment in cities? Here, we provide a comparative picture of the impact of automation across U.S. urban areas. Small cities will undertake greater adjustments, such as worker displacement and job content su...

Influence of occlusal contact area on cusp defection and stress distribution.

Science.gov (United States)

Costa, Anna Karina Figueiredo; Xavier, Thaty Aparecida; Paes-Junior, Tarcisio José Arruda; Andreatta-Filho, Oswaldo Daniel; Borges, Alexandre Luiz Souto

2014-11-01

The purpose of this study was to evaluate the effect of occlusal contact area for loading on the cuspal defection and stress distribution in a first premolar restored with a high elastic modulus restorative material. The Rhinoceros 4.0 software was used for modeling the three-dimensional geometries of dental and periodontal structures and the inlay restoration. Thus, two different models, intact and restored teeth with three occlusal contact areas, 0.1, 0.5 and 0.75 mm(2), on enamel at the occlusal surface of buccal and lingual cusps. Finite element analysis (FEA) was performed with the program ANSYS (Workbench 13.0), which generated a mesh with tetrahedral elements with greater refinement in the regions of interest, and was constrained at the bases of cortical and trabecular bone in all axis and loaded with 100 N normal to each contact area. To analysis of maximum principal stress, the smaller occlusal contact area showed greater compressive stress in region of load application for both the intact and inlay restored tooth. However, tensile stresses at the occlusal isthmus were similar for all three tested occlusal contact areas (60 MPa). To displacement of the cusps was higher for teeth with inlay (0.46-0.48 mm). For intact teeth, the smaller contact area showed greater displacement (0.10 mm). For teeth with inlays, the displacement of the cusps were similar in all types of occlusal area. Cuspal displacement was higher in the restored tooth when compared to the intact tooth, but there were no significant variations even with changes in the occlusal contact area. RELEVANCE CLINICAL: Occlusal contacts have a great influence on the positioning of teeth being able to maintain the position and stability of the mandible. Axial loads would be able to generate more uniform stress at the root presenting a greater concentration of load application in the point and the occlusal surface. Thus, is necessary to analyze the relationship between these occlusal contacts as dental

Structural, Functional, and Metabolic Brain Markers Differentiate Collision versus Contact and Non-Contact Athletes.

Science.gov (United States)

Churchill, Nathan W; Hutchison, Michael G; Di Battista, Alex P; Graham, Simon J; Schweizer, Tom A

2017-01-01

There is growing concern about how participation in contact sports affects the brain. Retrospective evidence suggests that contact sports are associated with long-term negative health outcomes. However, much of the research to date has focused on former athletes with significant health problems. Less is known about the health of current athletes in contact and collision sports who have not reported significant medical issues. In this cross-sectional study, advanced magnetic resonance imaging (MRI) was used to evaluate multiple aspects of brain physiology in three groups of athletes participating in non-contact sports ( N  = 20), contact sports ( N  = 22), and collision sports ( N  = 23). Diffusion tensor imaging was used to assess white matter microstructure based on measures of fractional anisotropy (FA) and mean diffusivity (MD); resting-state functional MRI was used to evaluate global functional connectivity; single-voxel spectroscopy was used to compare ratios of neural metabolites, including N -acetyl aspartate (NAA), creatine (Cr), choline, and myo-inositol. Multivariate analysis revealed structural, functional, and metabolic measures that reliably differentiated between sport groups. The collision group had significantly elevated FA and reduced MD in white matter, compared to both contact and non-contact groups. In contrast, the collision group showed significant reductions in functional connectivity and the NAA/Cr metabolite ratio, relative to only the non-contact group, while the contact group overlapped with both non-contact and collision groups. For brain regions associated with contact sport participation, athletes with a history of concussion also showed greater alterations in FA and functional connectivity, indicating a potential cumulative effect of both contact exposure and concussion history on brain physiology. These findings indicate persistent differences in brain physiology for athletes participating in contact and collision sports

Operational technology for greater confinement disposal

International Nuclear Information System (INIS)

Dickman, P.T.; Vollmer, A.T.; Hunter, P.H.

1984-12-01

Procedures and methods for the design and operation of a greater confinement disposal facility using large-diameter boreholes are discussed. It is assumed that the facility would be located at an operating low-level waste disposal site and that only a small portion of the wastes received at the site would require greater confinement disposal. The document is organized into sections addressing: facility planning process; facility construction; waste loading and handling; radiological safety planning; operations procedures; and engineering cost studies. While primarily written for low-level waste management site operators and managers, a detailed economic assessment section is included that should assist planners in performing cost analyses. Economic assessments for both commercial and US government greater confinement disposal facilities are included. The estimated disposal costs range from $27 to $104 per cubic foot for a commercial facility and from $17 to $60 per cubic foot for a government facility. These costs are based on average site preparation, construction, and waste loading costs for both contact- and remote-handled wastes. 14 figures, 22 tables

Sandia National Laboratories: Contact Us

Science.gov (United States)

Employment (VOE) - New Mexico and California Please submit your requests by fax OR email - not both. Fax Number: (505) 845-0097, ATTN: HR Records Email Address: HR-Records@sandia.gov HR Records' Hotline: (505 in Writing Requester's Contact Information: Requester's name, company name (if applicable), phone

Free surface modeling of contacting solid metal flows employing the ALE formulation

NARCIS (Netherlands)

van der Stelt, A.A.; Bor, Teunis Cornelis; Geijselaers, Hubertus J.M.; Akkerman, Remko; Huetink, Han; Merklein, M.; Hagenah, H.

2012-01-01

In this paper, a numerical problem with contacting solid metal flows is presented and solved with an arbitrary Lagrangian-Eulerian (ALE) finite element method. The problem consists of two domains which mechanically interact with each other. For this simulation a new free surface boundary condition

Rugged Low-Resistance Contacts To High-Tc Superconductors

Science.gov (United States)

Caton, Randall; Selim, Raouf; Byvik, Charles E.; Buoncristiani, A. Martin

1992-01-01

Newly developed technique involving use of gold makes possible to fabricate low-resistance contacts with rugged connections to high-Tc superconductors. Gold diffused into specimen of superconducting material by melting gold beads onto surface of specimen, making strong mechanical contacts. Shear strength of gold bead contacts greater than epoxy or silver paste. Practical use in high-current-carrying applications of new high-Tc materials, including superconducting magnets, long-wavelength sensors, electrical ground planes at low temperatures, and efficient transmission of power.

Applicability of contact angle techniques used in the analysis of contact lenses, part 1: comparative methodologies.

Science.gov (United States)

Campbell, Darren; Carnell, Sarah Maria; Eden, Russell John

2013-05-01

Contact angle, as a representative measure of surface wettability, is often employed to interpret contact lens surface properties. The literature is often contradictory and can lead to confusion. This literature review is part of a series regarding the analysis of hydrogel contact lenses using contact angle techniques. Here we present an overview of contact angle terminology, methodology, and analysis. Having discussed this background material, subsequent parts of the series will discuss the analysis of contact lens contact angles and evaluate differences in published laboratory results. The concepts of contact angle, wettability and wetting are presented as an introduction. Contact angle hysteresis is outlined and highlights the advantages in using dynamic analytical techniques over static methods. The surface free energy of a material illustrates how contact angle analysis is capable of providing supplementary surface characterization. Although single values are able to distinguish individual material differences, surface free energy and dynamic methods provide an improved understanding of material behavior. The frequently used sessile drop, captive bubble, and Wilhelmy plate techniques are discussed. Their use as both dynamic and static methods, along with the advantages and disadvantages of each technique, is explained. No single contact angle technique fully characterizes the wettability of a material surface, and the application of complimenting methods allows increased characterization. At present, there is not an ISO standard method designed for soft materials. It is important that each contact angle technique has a standard protocol, as small protocol differences between laboratories often contribute to a variety of published data that are not easily comparable.

Atypical work and employment continuity

OpenAIRE

Addison, John T.; Surfield, Christopher J.

2009-01-01

Atypical employment arrangements such as agency temporary work and contracting have long been criticized as offering more precarious and unstable work than regular employment. Using data from two datasets – the CAEAS and the NLSY79 – we determine whether workers who take such jobs rather than regular employment, or the alternative of continued job search, subsequently experience greater or lesser employment continuity. Observed differences between the various working arrangements are starkest...

Contact pressures and the impact of farm equipment on Latosol with the presence and absence of sugarcane straw

Directory of Open Access Journals (Sweden)

Reginaldo Barboza da Silva

2016-06-01

Full Text Available ABSTRACT High contact pressures applied to soil result in a greater degree of compaction, in addition to promoting other negative effects. The objective of this study was to quantify contact areas by using different methodologies, and pressures of farm equipment employed in production activity and evaluate structural changes caused in a Red Latosol with the presence and absence of straw cover. The design was completely randomized in a factorial scheme of type 4 (tire on front axle, tire on rear axle, tire on a sugarcane wagon and metallic track of sugar cane Harvester x 2 (presence and absence of straw. The contact area (CA of the run was obtained by three procedures: analytical measure of the area of an ellipse (CA1; digital measurement of area of an ellipse (CA2; and measurement of real contact area (RCA, with digital resources. The contact pressure was calculated from the ratio of mass of each machine's axle and the contact area of the run. The contact area obtained according to the procedure of the ellipse (CA1 and CA2 is overrated when compared to actual area obtained digitally (RCA. The straw reduces the contact pressure in the soil, due to the deep tire treads and consequently, increased contact area. Areas where the traffic of the machines occurred with soil covered with the presence of straw showed reduced soil resistance to penetration, cone index and pre-consolidation pressure, confirming that the increased contact area produced by straw reduced the pressure applied and the compression power dissipated in the soil.

Application of an enriched FEM technique in thermo-mechanical contact problems

Science.gov (United States)

Khoei, A. R.; Bahmani, B.

2018-02-01

In this paper, an enriched FEM technique is employed for thermo-mechanical contact problem based on the extended finite element method. A fully coupled thermo-mechanical contact formulation is presented in the framework of X-FEM technique that takes into account the deformable continuum mechanics and the transient heat transfer analysis. The Coulomb frictional law is applied for the mechanical contact problem and a pressure dependent thermal contact model is employed through an explicit formulation in the weak form of X-FEM method. The equilibrium equations are discretized by the Newmark time splitting method and the final set of non-linear equations are solved based on the Newton-Raphson method using a staggered algorithm. Finally, in order to illustrate the capability of the proposed computational model several numerical examples are solved and the results are compared with those reported in literature.

FASTSIM2: a second-order accurate frictional rolling contact algorithm

Science.gov (United States)

Vollebregt, E. A. H.; Wilders, P.

2011-01-01

In this paper we consider the frictional (tangential) steady rolling contact problem. We confine ourselves to the simplified theory, instead of using full elastostatic theory, in order to be able to compute results fast, as needed for on-line application in vehicle system dynamics simulation packages. The FASTSIM algorithm is the leading technology in this field and is employed in all dominant railway vehicle system dynamics packages (VSD) in the world. The main contribution of this paper is a new version "FASTSIM2" of the FASTSIM algorithm, which is second-order accurate. This is relevant for VSD, because with the new algorithm 16 times less grid points are required for sufficiently accurate computations of the contact forces. The approach is based on new insights in the characteristics of the rolling contact problem when using the simplified theory, and on taking precise care of the contact conditions in the numerical integration scheme employed.

Correlating contact line capillarity and dynamic contact angle hysteresis in surfactant-nanoparticle based complex fluids

Science.gov (United States)

Harikrishnan, A. R.; Dhar, Purbarun; Agnihotri, Prabhat K.; Gedupudi, Sateesh; Das, Sarit K.

2018-04-01

Dynamic wettability and contact angle hysteresis can be correlated to shed insight onto any solid-liquid interaction. Complex fluids are capable of altering the expected hysteresis and dynamic wetting behavior due to interfacial interactions. We report the effect of capillary number on the dynamic advancing and receding contact angles of surfactant-based nanocolloidal solutions on hydrophilic, near hydrophobic, and superhydrophobic surfaces by performing forced wetting and de-wetting experiments by employing the embedded needle method. A segregated study is performed to infer the contributing effects of the constituents and effects of particle morphology. The static contact angle hysteresis is found to be a function of particle and surfactant concentrations and greatly depends on the nature of the morphology of the particles. An order of estimate of line energy and a dynamic flow parameter called spreading factor and the transient variations of these parameters are explored which sheds light on the dynamics of contact line movement and response to perturbation of three-phase contact. The Cox-Voinov-Tanner law was found to hold for hydrophilic and a weak dependency on superhydrophobic surfaces with capillary number, and even for the complex fluids, with a varying degree of dependency for different fluids.

Contact Dermatitis in the Construction Industry

NARCIS (Netherlands)

Timmerman, J.G.

2017-01-01

Construction workers are employed in a large and dynamic occupational sector and are exposed to hazardous substances during their work. This may cause diseases like contact dermatitis, one of the most prevalent occupational diseases in many countries. This thesis aims to assess the current

75 FR 67431 - State-40, Employee Contact Records

Science.gov (United States)

2010-11-02

... contact information and employment type (government or contractor). AUTHORITY FOR MAINTENANCE OF THE... is not limited to two-factor authentication and time out function. All users with authorized access...

Depleted-heterojunction colloidal quantum dot photovoltaics employing low-cost electrical contacts

KAUST Repository

Debnath, Ratan

2010-01-01

With an aim to reduce the cost of depleted-heterojunction colloidal quantum dot solar cells, we describe herein a strategy that replaces costly Au with a low-cost Ni-based Ohmic contact. The resultant devices achieve 3.5% Air Mass 1.5 power conversion efficiency. Only by incorporating a 1.2-nm-thick LiF layer between the PbS quantum dot film and Ni, we were able to prevent undesired reactions and degradation at the metal-semiconductor interface. © 2010 American Institute of Physics.

Smoothed particle hydrodynamics study of the roughness effect on contact angle and droplet flow.

Science.gov (United States)

Shigorina, Elena; Kordilla, Jannes; Tartakovsky, Alexandre M

2017-09-01

We employ a pairwise force smoothed particle hydrodynamics (PF-SPH) model to simulate sessile and transient droplets on rough hydrophobic and hydrophilic surfaces. PF-SPH allows modeling of free-surface flows without discretizing the air phase, which is achieved by imposing the surface tension and dynamic contact angles with pairwise interaction forces. We use the PF-SPH model to study the effect of surface roughness and microscopic contact angle on the effective contact angle and droplet dynamics. In the first part of this work, we investigate static contact angles of sessile droplets on different types of rough surfaces. We find that the effective static contact angles of Cassie and Wenzel droplets on a rough surface are greater than the corresponding microscale static contact angles. As a result, microscale hydrophobic rough surfaces also show effective hydrophobic behavior. On the other hand, microscale hydrophilic surfaces may be macroscopically hydrophilic or hydrophobic, depending on the type of roughness. We study the dependence of the transition between Cassie and Wenzel states on roughness and droplet size, which can be linked to the critical pressure for the given fluid-substrate combination. We observe good agreement between simulations and theoretical predictions. Finally, we study the impact of the roughness orientation (i.e., an anisotropic roughness) and surface inclination on droplet flow velocities. Simulations show that droplet flow velocities are lower if the surface roughness is oriented perpendicular to the flow direction. If the predominant elements of surface roughness are in alignment with the flow direction, the flow velocities increase compared to smooth surfaces, which can be attributed to the decrease in fluid-solid contact area similar to the lotus effect. We demonstrate that classical linear scaling relationships between Bond and capillary numbers for droplet flow on flat surfaces also hold for flow on rough surfaces.

Geometrical effects of conventional and digital prosthodontic planning wax-ups on lateral occlusal contact number, contact area, and steepness.

Science.gov (United States)

Abduo, Jaafar

2017-01-01

This study evaluated and compared the effect of conventional and digital wax-ups on three lateral occlusion variables: contact number, contact area, and steepness. Dental casts of 10 patients with Angle Class I relationship were included in the study. All patients required fixed prosthodontic treatment that would affect lateral occlusion. The casts of all patients received conventional and digital wax-ups. For pretreatment, conventional wax-up, and digital wax-up casts, contact number, contact area, and occlusion steepness were measured at four lateral positions, that is, at excursions of 0.5, 1.0, 2.0, and 3.0 mm from maximal intercuspation. Lateral occlusion scheme variables were affected by use of diagnostic wax-ups. For all types of casts, contact number decreased as excursion increased. The two types of wax-ups had similar contact number patterns, and contact number was significantly greater for these casts than for pretreatment casts in the earlier stages of excursion. Similarly, contact area gradually decreased with increasing excursion in the pretreatment and conventional and digital wax-up casts. There was only a minimal decrease in occlusion steepness as excursion increased. However, lateral occlusion was generally steeper for digital wax-up casts.

Glenohumeral contact force during flat and topspin tennis forehand drives.

Science.gov (United States)

Blache, Yoann; Creveaux, Thomas; Dumas, Raphaël; Chèze, Laurence; Rogowski, Isabelle

2017-03-01

The primary role of the shoulder joint in tennis forehand drive is at the expense of the loadings undergone by this joint. Nevertheless, few studies investigated glenohumeral (GH) contact forces during forehand drives. The aim of this study was to investigate GH compressive and shearing forces during the flat and topspin forehand drives in advanced tennis players. 3D kinematics of flat and topspin forehand drives of 11 advanced tennis players were recorded. The Delft Shoulder and Elbow musculoskeletal model was implemented to assess the magnitude and orientation of GH contact forces during the forehand drives. The results showed no differences in magnitude and orientation of GH contact forces between the flat and topspin forehand drives. The estimated maximal GH contact force during the forward swing phase was 3573 ± 1383 N, which was on average 1.25 times greater than during the follow-through phase, and 5.8 times greater than during the backswing phase. Regardless the phase of the forehand drive, GH contact forces pointed towards the anterior-superior part of the glenoid therefore standing for shearing forces. Knowledge of GH contact forces during real sport tasks performed at high velocity may improve the understanding of various sport-specific adaptations and causative factors for shoulder problems.

The uneven impact of the European Employment Strategy on member states' employment policies

DEFF Research Database (Denmark)

Simonsen, Mikkel Mailand

2008-01-01

policies to varying degrees, but that the impact, generally speaking, has been limited. In the article, the author examines the impact of the strategy as a result of peer pressure and key actors' strategic use of the strategy and shows how these mechanisms work. Factors that can explain why greater impact......In the mid-1990s, EU member states decided to coordinate their national employment policies through a common European Employment Strategy (EES). Building on a systematic comparative study of four member states, the author argues that the strategy has influenced the member states' employment...

Contact mechanics: contact area and interfacial separation from small contact to full contact

International Nuclear Information System (INIS)

Yang, C; Persson, B N J

2008-01-01

We present a molecular dynamics study of the contact between a rigid solid with a randomly rough surface and an elastic block with a flat surface. The numerical calculations mainly focus on the contact area and the interfacial separation from small contact (low load) to full contact (high load). For a small load the contact area varies linearly with the load and the interfacial separation depends logarithmically on the load. For a high load the contact area approaches the nominal contact area (i.e. complete contact), and the interfacial separation approaches zero. The numerical results have been compared with analytical theory and experimental results. They are in good agreement with each other. The present findings may be very important for soft solids, e.g. rubber, or for very smooth surfaces, where complete contact can be reached at moderately high loads without plastic deformation of the solids

Dose estimation and radiation control measures for individuals having close contact with patients administered in vivo nuclear medicine

International Nuclear Information System (INIS)

Konishi, E.; Abe, K.; Kusama, T.

1993-01-01

Patients who have been administered radiopharmaceuticals become a source of exposure to a non-occupational individual helping in support and comfort of these patients. We measured external dose rates at several distances from 84 adult patients administered radiopharmaceuticals, and urinary excretion of radioactivity in their patients. And we estimated the maximal dose for persons having close contact with patients administered radiopharmaceuticals from the combination of these measurement data and scenarios of contact with patients. On the basis of the estimated values, we proposed the following dose constraint for care givers. (1) The dose constraint for a non-occupational care givers to an adult nuclear medicine patient should in no case exceed 300 μSv per patient per examination of any kind. (2) The dose constraint in ordinary examinations employing a radionuclide should not be greater than 15 μSv per patient per examination. (3 tabs.)

[Eye contact effects: A therapeutic issue?

Science.gov (United States)

Baltazar, M; Conty, L

2016-12-01

The perception of a direct gaze - that is, of another individual's gaze directed at the observer that leads to eye contact - is known to influence a wide range of cognitive processes and behaviors. We stress that these effects mainly reflect positive impacts on human cognition and may thus be used as relevant tools for therapeutic purposes. In this review, we aim (1) to provide an exhaustive review of eye contact effects while discussing the limits of the dominant models used to explain these effects, (2) to illustrate the therapeutic potential of eye contact by targeting those pathologies that show both preserved gaze processing and deficits in one or several functions that are targeted by the eye contact effects, and (3) to propose concrete ways in which eye contact could be employed as a therapeutic tool. (1) We regroup the variety of eye contact effects into four categories, including memory effects, activation of prosocial behavior, positive appraisals of self and others and the enhancement of self-awareness. We emphasize that the models proposed to account for these effects have a poor predictive value and that further descriptions of these effects is needed. (2) We then emphasize that people with pathologies that affect memory, social behavior, and self and/or other appraisal, and self-awareness could benefit from eye contact effects. We focus on depression, autism and Alzheimer's disease to illustrate our proposal. To our knowledge, no anomaly of eye contact has been reported in depression. Patients suffering from Alzheimer disease, at the early and moderate stage, have been shown to maintain a normal amount of eye contact with their interlocutor. We take into account that autism is controversial regarding whether gaze processing is preserved or altered. In the first view, individuals are thought to elude or omit gazing at another's eyes while in the second, individuals are considered to not be able to process the gaze of others. We adopt the first stance

Experimental Methods for Implementing Graphene Contacts to Finite Bandgap Semiconductors

DEFF Research Database (Denmark)

Meyer-Holdt, Jakob

Present Ph.D. thesis describes my work on implanting graphene as electrical contact to finite bandgap semiconductors. Different transistor architectures, types of graphene and finite bandgap semiconductors have been employed. The device planned from the beginning of my Ph.D. fellowship...... contacts to semiconductor nanowires, more specifically, epitaxially grown InAs nanowires. First, we tried a top down method where CVD graphene was deposited on substrate supported InAs nanowires followed by selective graphene ashing to define graphene electrodes. While electrical contact between...

The effect of organisational context variables on employer attitudes toward employability of ex-offenders.

Science.gov (United States)

Lukies, John; Graffam, Joseph; Shinkfield, Alison J

2011-05-01

The authors tested the premise that organisational context variables (i.e., size of organisation, industry type, location, and respondent's position in organisation) had significant effects on employer (N = 596) attitudes toward employability of ex-offenders. They also examined whether organisational context variables had an equivalent effect on employer attitudes to that of job-seeker criminal history and employer personal characteristics (e.g., respondent age and gender). Using linear regression (HLM 6.02a), organisational context variables were shown to have a significant effect on employer attitudes. In addition, organisational context variables had a significantly greater effect on employer attitudes than did employer personal characteristics. However, job-seeker criminal history contributed more to respondent ratings of ex-offender employability than did organisational context variables. The finding that judgements of employability are influenced by organisational context variables has implications for future research relevant to reintegration. Stakeholder attitudes toward the reintegration success of ex-offenders may be generally influenced by context variables.

Cross-Cultural Contact in Counseling Training.

Science.gov (United States)

Diaz-Lazaro, Carlos M.; Cohen, B. Beth

2001-01-01

Reports on the importance of cross-cultural contact in the development of multicultural counseling competencies (MCCs). Results reveal that the greater the prior cross-cultural life experience, the higher were students' MCCs measured at the beginning of a multicultural counseling course. MCCs measured at the end of the course were significantly…

Employability, op weg naar een methode

NARCIS (Netherlands)

Man, M. de

1998-01-01

In dit rapport wordt een model ontworpen voor ontwikkeling van employability in industriële bedrijven, en met name voor assemblage afdelingen. Er wordt een aantal fasen onderscheiden, te weten: de entree fase, waarin contact gelegd wordt met de klant en waarin onderzocht moet worden wat er verlangd

Flexible carbon-based ohmic contacts for organic transistors

Science.gov (United States)

Brandon, Erik (Inventor)

2007-01-01

The present invention relates to a system and method of organic thin-film transistors (OTFTs). More specifically, the present invention relates to employing a flexible, conductive particle-polymer composite material for ohmic contacts (i.e. drain and source).

Personal value preferences, group identifications, and cultural practices of Palestinian Israelis working in close contact with Jewish Israelis.

Science.gov (United States)

Tartakovsky, Eugene; Abu Kheit, Ayat

2017-01-01

The present study investigates the connection between personal value preferences, group identifications, and cultural practices among Palestinian Israelis working in close contact with the Jewish population in Israel. One hundred twenty-two Palestinian Israelis participated in the study. The participants were employed in different professional positions in the Tel Aviv Metropolitan area and were recruited to the study using the snowball technique. A stronger national identification was associated with a higher preference for the security and conformity values, and a lower preference for the humility values. A stronger ethnic identification was associated with a lower preference for the security, power, and stimulation values. Group identifications mediated the connection between personal value preferences and cultural practices. A longer time working in close contact with the majority group and less frequent visits home were associated with a greater adherence to the majority group's cultural practices but not with adherence to the ethnic group's practices and not with the group identifications.

Non-contact optoacoustic imaging with focused air-coupled transducers

Energy Technology Data Exchange (ETDEWEB)

Deán-Ben, X. Luís [Institute for Biological and Medical Imaging (IBMI), Helmholtz Zentrum München, Neuherberg (Germany); Pang, Genny A.; Razansky, Daniel, E-mail: dr@tum.de [Institute for Biological and Medical Imaging (IBMI), Helmholtz Zentrum München, Neuherberg (Germany); School of Medicine, Technische Universität München (TUM), Munich (Germany); Montero de Espinosa, Francisco [CSIC, Institute of Physics and Communication Technologies, Madrid (Spain)

2015-08-03

Non-contact optoacoustic imaging employing raster-scanning of a spherically focused air-coupled ultrasound transducer is showcased herein. Optoacoustic excitation with laser fluence within the maximal permissible human exposure limits in the visible and near-infrared spectra is applied to objects with characteristic dimensions smaller than 1 mm and absorption properties representative of the whole blood at near-infrared wavelengths, and these signals are shown to be detectable without contact to the sample using an air-coupled transducer with reasonable signal averaging. Optoacoustic images of vessel-mimicking tubes embedded in an agar phantom captured with this non-contact sensing technique are also showcased. These initial results indicate that an air-coupled ultrasound detection approach can be suitable for non-contact biomedical imaging with optoacoustics.

Dynamic contact with Signorini's condition and slip rate dependent friction

Directory of Open Access Journals (Sweden)

Kenneth Kuttler

2004-06-01

Full Text Available Existence of a weak solution for the problem of dynamic frictional contact between a viscoelastic body and a rigid foundation is established. Contact is modelled with the Signorini condition. Friction is described by a slip rate dependent friction coefficient and a nonlocal and regularized contact stress. The existence in the case of a friction coefficient that is a graph, which describes the jump from static to dynamic friction, is established, too. The proofs employ the theory of set-valued pseudomonotone operators applied to approximate problems and a priori estimates.

Adhesive contact: from atomistic model to continuum model

International Nuclear Information System (INIS)

Fan Kang-Qi; Jia Jian-Yuan; Zhu Ying-Min; Zhang Xiu-Yan

2011-01-01

Two types of Lennard-Jones potential are widely used in modeling adhesive contacts. However, the relationships between the parameters of the two types of Lennard-Jones potential are not well defined. This paper employs a self-consistent method to derive the Lennard-Jones surface force law from the interatomic Lennard-Jones potential with emphasis on the relationships between the parameters. The effect of using correct parameters in the adhesion models is demonstrated in single sphere-flat contact via continuum models and an atomistic model. Furthermore, the adhesion hysteresis behaviour is investigated, and the S-shaped force-distance relation is revealed by the atomistic model. It shows that the adhesion hysteresis loop is generated by the jump-to-contact and jump-off-contact, which are illustrated by the S-shaped force-distance curve. (atomic and molecular physics)

Workplace Training: Employer and Employee Perspectives

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2017

2017-01-01

According to the 2016 Organisation for Economic Co-operation and Development (OECD) report, Education at a glance, much of the learning at work takes place through employer-supported training. Both employers and employees recognise the benefits of such training because skilling the workforce can lead to better jobs, greater firm competitiveness,…

Small cities face greater impact from automation

Science.gov (United States)

Sun, Lijun; Cebrian, Manuel; Rahwan, Iyad

2018-01-01

The city has proved to be the most successful form of human agglomeration and provides wide employment opportunities for its dwellers. As advances in robotics and artificial intelligence revive concerns about the impact of automation on jobs, a question looms: how will automation affect employment in cities? Here, we provide a comparative picture of the impact of automation across US urban areas. Small cities will undertake greater adjustments, such as worker displacement and job content substitutions. We demonstrate that large cities exhibit increased occupational and skill specialization due to increased abundance of managerial and technical professions. These occupations are not easily automatable, and, thus, reduce the potential impact of automation in large cities. Our results pass several robustness checks including potential errors in the estimation of occupational automation and subsampling of occupations. Our study provides the first empirical law connecting two societal forces: urban agglomeration and automation's impact on employment. PMID:29436514

Small cities face greater impact from automation.

Science.gov (United States)

Frank, Morgan R; Sun, Lijun; Cebrian, Manuel; Youn, Hyejin; Rahwan, Iyad

2018-02-01

The city has proved to be the most successful form of human agglomeration and provides wide employment opportunities for its dwellers. As advances in robotics and artificial intelligence revive concerns about the impact of automation on jobs, a question looms: how will automation affect employment in cities? Here, we provide a comparative picture of the impact of automation across US urban areas. Small cities will undertake greater adjustments, such as worker displacement and job content substitutions. We demonstrate that large cities exhibit increased occupational and skill specialization due to increased abundance of managerial and technical professions. These occupations are not easily automatable, and, thus, reduce the potential impact of automation in large cities. Our results pass several robustness checks including potential errors in the estimation of occupational automation and subsampling of occupations. Our study provides the first empirical law connecting two societal forces: urban agglomeration and automation's impact on employment. © 2018 The Authors.

The impact of the unstructured contacts component in influenza pandemic modeling.

Directory of Open Access Journals (Sweden)

Marco Ajelli

Full Text Available Individual based models have become a valuable tool for modeling the spatiotemporal dynamics of epidemics, e.g. influenza pandemic, and for evaluating the effectiveness of intervention strategies. While specific contacts among individuals into diverse environments (family, school/workplace can be modeled in a standard way by employing available socio-demographic data, all the other (unstructured contacts can be dealt with by adopting very different approaches. This can be achieved for instance by employing distance-based models or by choosing unstructured contacts in the local communities or by employing commuting data.Here we show how diverse choices can lead to different model outputs and thus to a different evaluation of the effectiveness of the containment/mitigation strategies. Sensitivity analysis has been conducted for different values of the first generation index G(0, which is the average number of secondary infections generated by the first infectious individual in a completely susceptible population and by varying the seeding municipality. Among the different considered models, attack rate ranges from 19.1% to 25.7% for G(0 = 1.1, from 47.8% to 50.7% for G(0 = 1.4 and from 62.4% to 67.8% for G(0 = 1.7. Differences of about 15 to 20 days in the peak day have been observed. As regards spatial diffusion, a difference of about 100 days to cover 200 km for different values of G(0 has been observed.To reduce uncertainty in the models it is thus important to employ data, which start being available, on contacts on neglected but important activities (leisure time, sport mall, restaurants, etc. and time-use data for improving the characterization of the unstructured contacts. Moreover, all the possible effects of different assumptions should be considered for taking public health decisions: not only sensitivity analysis to various model parameters should be performed, but intervention options should be based on the analysis and

Bacterial adhesion to conventional hydrogel and new silicone-hydrogel contact lens materials.

Science.gov (United States)

Kodjikian, Laurent; Casoli-Bergeron, Emmanuelle; Malet, Florence; Janin-Manificat, Hélène; Freney, Jean; Burillon, Carole; Colin, Joseph; Steghens, Jean-Paul

2008-02-01

As bacterial adhesion to contact lenses may contribute to the pathogenesis of keratitis, the aim of our study was to investigate in vitro adhesion of clinically relevant bacteria to conventional hydrogel (standard HEMA) and silicone-hydrogel contact lenses using a bioluminescent ATP assay. Four types of unworn contact lenses (Etafilcon A, Galyfilcon A, Balafilcon A, Lotrafilcon B) were incubated with Staphylococcus epidermidis (two different strains) and Pseudomonas aeruginosa suspended in phosphate buffered saline (PBS). Lenses were placed with the posterior surface facing up and were incubated in the bacterial suspension for 4 hours at 37 degrees C. Bacterial binding was then measured and studied by bioluminescent ATP assay. Six replicate experiments were performed for each lens and strain. Adhesion of all species of bacteria to standard HEMA contact lenses (Etafilcon A) was found to be significantly lower than that of three types of silicone-hydrogel contact lenses, whereas Lotrafilcon B material showed the highest level of bacterial binding. Differences between species in the overall level of adhesion to the different types of contact lenses were observed. Adhesion of P. aeruginosa was typically at least 20 times greater than that observed with both S. epidermidis strains. Conventional hydrogel contact lenses exhibit significantly lower bacterial adhesion in vitro than silicone-hydrogel ones. This could be due to the greater hydrophobicity but also to the higher oxygen transmissibility of silicone-hydrogel lenses.

Education and Youth Employment in Less Developed Countries.

Science.gov (United States)

Medina, Alberto Hernandez; And Others

The education/employment situations of young people in Mexico and South Asia are examined as part of a project to broaden perspectives on social, educational, and employment issues in developing nations. In Mexico, economic growth between 1940 and 1970 was considerably greater than achievement of social goals such as full employment and…

Effect of Ankle Joint Contact Angle and Ground Contact Time on Depth Jump Performance.

Science.gov (United States)

Phillips, Joshua H; Flanagan, Sean P

2015-11-01

Athletes often need to both jump high and get off the ground quickly, but getting off the ground quickly can decrease the vertical ground reaction force (VGRF) impulse, impeding jump height. Energy stored in the muscle-tendon complex during the stretch-shortening cycle (SSC) may mitigate the effects of short ground contact times (GCTs). To take advantage of the SSC, several coaches recommend "attacking" the ground with the foot in a dorsiflexed (DF) position at contact. However, the efficacy of this technique has not been tested. This investigation tested the hypotheses that shorter GCTs would lead to smaller vertical depth jump heights (VDJH), and that this difference could be mitigated by instructing the athletes to land in a DF as opposed to a plantar flexed (PF) foot position. Eighteen healthy junior college athletes performed depth jumps from a 45-cm box onto force platforms under instruction to achieve one of the 2 objectives (maximum jump height [hmax] or minimal GCT [tmin]), with one of the 2 foot conditions (DF or PF). These variations created 4 distinct jump conditions: DF-hmax, DF-tmin, PF-hmax, and PF-tmin. For all variables examined, there were no significant interactions. For all 4 conditions, the ankle was PF during landing, but the DF condition was 28.87% less PF than the PF condition. The tmin conditions had a 23.48% shorter GCT than hmax. There were no significant main effects for jump height. The peak impact force for tmin was 22.14% greater than hmax and 19.11% greater for DF compared with PF conditions. A shorter GCT did not necessitate a smaller jump height, and a less PF foot did not lead to improvements in jump height or contact time during a depth jump from a 45-cm box. The same jump height was attained in less PF and shorter GCT conditions by larger impact forces. To decrease contact time while maintaining jump height, athletes should be instructed to "get off the ground as fast as possible." This cue seems to be more important than foot

Rigid body formulation in a finite element context with contact interaction

Science.gov (United States)

Refachinho de Campos, Paulo R.; Gay Neto, Alfredo

2018-03-01

The present work proposes a formulation to employ rigid bodies together with flexible bodies in the context of a nonlinear finite element solver, with contact interactions. Inertial contributions due to distribution of mass of a rigid body are fully developed, considering a general pole position associated with a single node, representing a rigid body element. Additionally, a mechanical constraint is proposed to connect a rigid region composed by several nodes, which is useful for linking rigid/flexible bodies in a finite element environment. Rodrigues rotation parameters are used to describe finite rotations, by an updated Lagrangian description. In addition, the contact formulation entitled master-surface to master-surface is employed in conjunction with the rigid body element and flexible bodies, aiming to consider their interaction in a rigid-flexible multibody environment. New surface parameterizations are presented to establish contact pairs, permitting pointwise interaction in a frictional scenario. Numerical examples are provided to show robustness and applicability of the methods.

Customer loyalty among daily disposable contact lens wearers.

Science.gov (United States)

Patel, Neelam I; Naroo, Shehzad A; Eperjesi, Frank; Rumney, Nicholas J

2015-02-01

Optometric practices offer contact lenses as cash sale items or as part of monthly payment plans. With the contact lens market becoming increasingly competitive, patients are opting to purchase lenses from supermarkets and Internet suppliers. Monthly payment plans are often implemented to improve loyalty. This study aimed to compare behavioural loyalty between monthly payment plan members and non-members. BBR Optometry Ltd offers a monthly payment plan (Eyelife™) to their contact lens wearers. A retrospective audit of 38 Eyelife™ members (mean±SD: 42.7±15.0 years) and 30 non-members (mean±SD: 40.8±16.7 years) was conducted. Revenue and profits generated, service uptake and product sales between the two groups were compared over a fixed period of 18 months. Eyelife™ members generated significantly higher professional fee revenue (Ployalty among contact lens wearers, particularly service uptake and volume of lens purchases. Additionally the greater professional fees generated, render monthly payment plans an attractive business model and practice builder. Copyright © 2014 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

EMPLOYMENT AND SOCIAL TRENDS IN ROMANIA

Directory of Open Access Journals (Sweden)

Constantin CIUTACU

2007-06-01

Full Text Available This paper deals with demographic trends in Romania and their influence on the labour market. In this context, unemployment and emigration are factors that play a significant role in the economy. The decline in employment weakens the social security system as employers and employees have to pay greater contributions. Also, the diminution in workforce and in the number of people in paid employment and the shortage of professionals working in specialized fields of health and education are issues requiring urgent clarification.

The influence of rail surface irregularities on contact forces and local stresses

Science.gov (United States)

Andersson, Robin; Torstensson, Peter T.; Kabo, Elena; Larsson, Fredrik

2015-01-01

The effect of initial rail surface irregularities on promoting further surface degradation is investigated. The study concerns rolling contact fatigue formation, in particular in the form of the so-called squats. The impact of surface irregularities in the form of dimples is quantified by peak magnitudes of dynamic contact stresses and contact forces. To this end simulations of two-dimensional (later extended to three-dimensional) vertical dynamic vehicle-track interaction are employed. The most influencing parameters are identified. It is shown that even very shallow dimples might have a large impact on local contact stresses. Peak magnitudes of contact forces and stresses due to the influence of rail dimples are shown to exceed those due to rail corrugation.

Contact fatigue of human enamel: Experiments, mechanisms and modeling.

Science.gov (United States)

Gao, S S; An, B B; Yahyazadehfar, M; Zhang, D; Arola, D D

2016-07-01

Cyclic contact between natural tooth structure and engineered ceramics is increasingly common. Fatigue of the enamel due to cyclic contact is rarely considered. The objectives of this investigation were to evaluate the fatigue behavior of human enamel by cyclic contact, and to assess the extent of damage over clinically relevant conditions. Cyclic contact experiments were conducted using the crowns of caries-free molars obtained from young donors. The cuspal locations were polished flat and subjected to cyclic contact with a spherical indenter of alumina at 2Hz. The progression of damage was monitored through the evolution in contact displacement, changes in the contact hysteresis and characteristics of the fracture pattern. The contact fatigue life diagram exhibited a decrease in cycles to failure with increasing cyclic load magnitude. Two distinct trends were identified, which corresponded to the development and propagation of a combination of cylindrical and radial cracks. Under contact loads of less than 400N, enamel rod decussation resisted the growth of subsurface cracks. However, at greater loads the damage progressed rapidly and accelerated fatigue failure. Overall, cyclic contact between ceramic appliances and natural tooth structure causes fatigue of the enamel. The extent of damage is dependent on the magnitude of cyclic stress and the ability of the decussation to arrest the fatigue damage. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sliding contact fracture of dental ceramics: Principles and validation

Science.gov (United States)

Ren, Linlin; Zhang, Yu

2014-01-01

Ceramic prostheses are subject to sliding contact under normal and tangential loads. Accurate prediction of the onset of fracture at two contacting surfaces holds the key to greater long-term performance of these prostheses. In this study, building on stress analysis of Hertzian contact and considering fracture criteria for linear elastic materials, a constitutive fracture mechanics relation was developed to incorporate the critical fracture load with the contact geometry, coefficient of friction and material fracture toughness. Critical loads necessary to cause fracture under a sliding indenter were calculated from the constitutive equation, and compared with the loads predicted from elastic stress analysis in conjunction with measured critical load for frictionless normal contact—a semi-empirical approach. The major predictions of the models were calibrated with experimentally determined critical loads of current and future dental ceramics after contact with a rigid spherical slider. Experimental results conform with the trends predicted by the models. PMID:24632538

To Whom Is Contact Use Beneficial? The Impacts of Self-Selected Contact Use on Gender Income Differentials in the Transitional Economy of Urban China

Directory of Open Access Journals (Sweden)

Jing Shen

2017-12-01

Full Text Available In this study, we examined the effect of contact use on the gender earnings gap in urban China, by taking into account the existence of self-selection effect. We theorised two sources of individuals’ self-selected job obtainment behaviour; namely, the structuralised gender-segregated employment environment and one’s internalisation of the structural constraints. Based on data collected from the highly marketized Chinese city Xiamen, our estimations from the Endogenous Switching Regression model show that there is indeed a significant tendency, in which women with marketable qualifications use social contacts to find jobs, even though their obtained income would have increased significantly had they chosen not to rely on contacts to find jobs. Men enjoyed premiums from their job search strategies, whether they relied on contact use or not.

Diminution of contact angle hysteresis under the influence of an oscillating force.

Science.gov (United States)

Manor, Ofer

2014-06-17

We suggest a simple quantitative model for the diminution of contact angle hysteresis under the influence of an oscillatory force invoked by thermal fluctuations, substrate vibrations, acoustic waves, or oscillating electric fields. Employing force balance rather than the usual description of contact angle hysteresis in terms of Gibbs energy, we highlight that a wetting system, such as a sessile drop or a bubble adhered to a solid substrate, appears at long times to be partially or fully independent of contact angle hysteresis and thus independent of static friction forces, as a result of contact line pinning. We verify this theory by studying several well-known experimental observations such as the approach of an arbitrary contact angle toward the Young contact angle and the apparent decrease (or increase) in an advancing (or a receding) contact angle under the influence of an external oscillating force.

Work-related factors influencing home care nurse intent to remain employed.

Science.gov (United States)

Tourangeau, Ann E; Patterson, Erin; Saari, Margaret; Thomson, Heather; Cranley, Lisa

Health care is shifting out of hospitals into community settings. In Ontario, Canada, home care organizations continue to experience challenges recruiting and retaining nurses. However, factors influencing home care nurse retention that can be modified remain largely unexplored. Several groups of factors have been identified as influencing home care nurse intent to remain employed including job characteristics, work structures, relationships and communication, work environment, responses to work, and conditions of employment. The aim of this study was to test and refine a model that identifies which factors are related to home care nurse intentions to remain employed for the next 5 years with their current home care employer organization. A cross-sectional survey design was implemented to test and refine a hypothesized model of home care nurse intent to remain employed. Logistic regression was used to determine which factors influence home care nurse intent to remain employed. Home care nurse intent to remain employed for the next 5 years was associated with increasing age, higher nurse-evaluated quality of care, having greater variety of patients, experiencing greater meaningfulness of work, having greater income stability, having greater continuity of client care, experiencing more positive relationships with supervisors, experiencing higher work-life balance, and being more satisfied with salary and benefits. Home care organizations can promote home care nurse intent to remain employed by (a) ensuring nurses have adequate training and resources to provide quality client care, (b) improving employment conditions to increase income stability and satisfaction with pay and benefits, (c) ensuring manageable workloads to facilitate improved work-life balance, and (d) ensuring leaders are accessible and competent.

Conduction channels at finite bias in single-atom gold contacts

DEFF Research Database (Denmark)

Brandbyge, Mads; Kobayashi, Nobuhiko; Tsukada, Masaru

1999-01-01

We consider the effect of a finite voltage bias on the conductance of single-atom gold contacts. We employ a nonorthogonal spn-tight-binding Hamiltonian combined with a local charge neutrality assumption. The conductance and charge distributions for finite bias are calculated using the nonequilib......We consider the effect of a finite voltage bias on the conductance of single-atom gold contacts. We employ a nonorthogonal spn-tight-binding Hamiltonian combined with a local charge neutrality assumption. The conductance and charge distributions for finite bias are calculated using...... of the eigenchannels projected onto tight-binding orbitals. We find a single almost fully transmitting channel with mainly s character for low bias while for high bias this channel becomes less transmitting and additional channels involving only d orbitals start to conduct....

Space standard of formal employment in Paraná

Directory of Open Access Journals (Sweden)

Ariana Cericatto da Silva

2017-08-01

Full Text Available The paper analyzes the spatial profile of the location of formal employment in the Paraná State in Brazil, between 2002 and 2011. For the analysis we used the measures of location for analysis of economic sectors between the regions and among them was elected Location Quotient and redistribution coefficient, using data from the Annual Report of Social Information (RAIS Ministry of Labor and Employment (MTE. The results showed that agriculture presents greater dispersion of formal employment in almost all regions of Paraná State, with the exception of the middle region of Curitiba´s city. Thus, agriculture accounts for a major source of employment and income in the state of Paraná. For the industrial sector, it is observed that the Traditional Industry presents greater dispersion between the Paraná regions, while the Non-Traditional Industry and Industry dynamics are more concentrated.

Flexibility of Employment Relationships: Possibilities and Limits. IAB Labour Market Research Topics No. 22.

Science.gov (United States)

Walwei, Ulrich

The controversial discussion of "atypical" forms of employment overlooks the fact that all parties involved can benefit from greater flexibility in the employment relationship. It all depends on what is made more flexible and how this greater flexibility is achieved. Employment relationships are built on a variety of factors…

Nano-indentation at the surface contact level: applying a harmonic frequency for measuring contact stiffness of self-assembled monolayers adsorbed on Au

International Nuclear Information System (INIS)

Chang, C.-W.; Liao, J.-D.

2008-01-01

In this study, the well-ordered alkanethiolate self-assembled monolayers (SAMs) of varied chain lengths and tail groups were employed as examples for nano-characterization on their mechanical properties. A novel nano-indentation technique with a constant harmonic frequency was applied on SAMs chemically adsorbed on Au to explore their contact mechanics, and furthermore to interpret how SAM molecules respond to an infinitesimal oscillation force without pressing them. Experimental results demonstrated that the harmonic contact stiffness along with the measured displacement of SAMs/Au was distinguishable using a dynamic contact modulus with the distinct feature of phase angles. Phase angles resulted from the relaxing continuation of an applied harmonic frequency and mostly influenced by the outermost tail group of SAM molecules. The harmonic contact stiffness of SAM molecules obviously increased with the densely packed alkyl chains and relatively intense agglomeration of the head group at the anchoring site. As a consequence, the result of this work is relevant to contact mechanics at the surface contact level for the distinction of molecular substances attached on a solid surface. Furthermore it is particularly anticipated to identify biological molecules of variable qualities under a fluid-like micro-environment

Nano-indentation at the surface contact level: applying a harmonic frequency for measuring contact stiffness of self-assembled monolayers adsorbed on Au

Energy Technology Data Exchange (ETDEWEB)

Chang, C.-W.; Liao, J.-D. [Department of Materials Science and Engineering, National Cheng Kung University, No. 1, University Road, Tainan 70101, Taiwan (China)], E-mail: jdliao@mail.ncku.edu.tw

2008-08-06

In this study, the well-ordered alkanethiolate self-assembled monolayers (SAMs) of varied chain lengths and tail groups were employed as examples for nano-characterization on their mechanical properties. A novel nano-indentation technique with a constant harmonic frequency was applied on SAMs chemically adsorbed on Au to explore their contact mechanics, and furthermore to interpret how SAM molecules respond to an infinitesimal oscillation force without pressing them. Experimental results demonstrated that the harmonic contact stiffness along with the measured displacement of SAMs/Au was distinguishable using a dynamic contact modulus with the distinct feature of phase angles. Phase angles resulted from the relaxing continuation of an applied harmonic frequency and mostly influenced by the outermost tail group of SAM molecules. The harmonic contact stiffness of SAM molecules obviously increased with the densely packed alkyl chains and relatively intense agglomeration of the head group at the anchoring site. As a consequence, the result of this work is relevant to contact mechanics at the surface contact level for the distinction of molecular substances attached on a solid surface. Furthermore it is particularly anticipated to identify biological molecules of variable qualities under a fluid-like micro-environment.

Contextual effect of positive intergroup contact on outgroup prejudice

Science.gov (United States)

Christ, Oliver; Schmid, Katharina; Lolliot, Simon; Swart, Hermann; Stolle, Dietlind; Tausch, Nicole; Al Ramiah, Ananthi; Wagner, Ulrich; Vertovec, Steven; Hewstone, Miles

2014-01-01

We assessed evidence for a contextual effect of positive intergroup contact, whereby the effect of intergroup contact between social contexts (the between-level effect) on outgroup prejudice is greater than the effect of individual-level contact within contexts (the within-level effect). Across seven large-scale surveys (five cross-sectional and two longitudinal), using multilevel analyses, we found a reliable contextual effect. This effect was found in multiple countries, operationalizing context at multiple levels (regions, districts, and neighborhoods), and with and without controlling for a range of demographic and context variables. In four studies (three cross-sectional and one longitudinal) we showed that the association between context-level contact and prejudice was largely mediated by more tolerant norms. In social contexts where positive contact with outgroups was more commonplace, norms supported such positive interactions between members of different groups. Thus, positive contact reduces prejudice on a macrolevel, whereby people are influenced by the behavior of others in their social context, not merely on a microscale, via individuals’ direct experience of positive contact with outgroup members. These findings reinforce the view that contact has a significant role to play in prejudice reduction, and has great policy potential as a means to improve intergroup relations, because it can simultaneously impact large numbers of people. PMID:24591627

Contextual effect of positive intergroup contact on outgroup prejudice.

Science.gov (United States)

Christ, Oliver; Schmid, Katharina; Lolliot, Simon; Swart, Hermann; Stolle, Dietlind; Tausch, Nicole; Al Ramiah, Ananthi; Wagner, Ulrich; Vertovec, Steven; Hewstone, Miles

2014-03-18

We assessed evidence for a contextual effect of positive intergroup contact, whereby the effect of intergroup contact between social contexts (the between-level effect) on outgroup prejudice is greater than the effect of individual-level contact within contexts (the within-level effect). Across seven large-scale surveys (five cross-sectional and two longitudinal), using multilevel analyses, we found a reliable contextual effect. This effect was found in multiple countries, operationalizing context at multiple levels (regions, districts, and neighborhoods), and with and without controlling for a range of demographic and context variables. In four studies (three cross-sectional and one longitudinal) we showed that the association between context-level contact and prejudice was largely mediated by more tolerant norms. In social contexts where positive contact with outgroups was more commonplace, norms supported such positive interactions between members of different groups. Thus, positive contact reduces prejudice on a macrolevel, whereby people are influenced by the behavior of others in their social context, not merely on a microscale, via individuals' direct experience of positive contact with outgroup members. These findings reinforce the view that contact has a significant role to play in prejudice reduction, and has great policy potential as a means to improve intergroup relations, because it can simultaneously impact large numbers of people.

Are employment-interview skills a correlate of subtypes of schizophrenia?

Science.gov (United States)

Charisiou, J; Jackson, H J; Boyle, G J; Burgess, P; Minas, I H; Joshua, S D

1989-12-01

46 inpatients with a DSM-III diagnosis of schizophrenia were assessed in the week prior to discharge from hospital on measures of positive and negative symptoms and on 12 measures of employment interview skills (i.e., eye contact, facial gestures, body posture, verbal content, voice volume, length of speech, motivation, self-confidence, ability to communicate, manifest adjustment, manifest intelligence, over-all interview skill), and a global measure of employability. A cluster analysis based on the total positive and negative symptom scores produced two groups. The group with the lower mean negative symptom score exhibited better employment-interview skills and higher ratings on employability.

Localization of pellicle-induced open contacts using Charge-Induced Voltage Alteration

Energy Technology Data Exchange (ETDEWEB)

Cole, E.I. Jr.; Soden, J.M.

1993-08-01

The recently developed Charge-Induced Voltage Alteration (CIVA) technique for localizing open metal conductors was used successfully to identify transistors with electrically open metal-1 contacts to silicon. The transistors were in the I/O port circuitry of a failing microcontroller and were completely covered by a metal-2 power bus. The root cause of the open contacts was a subtle scratch in the pellicle over the contact reticle. The scratch prevented full exposure of the photoresist, resulting in incomplete removal of the interlevel oxide in several contact windows. In addition to this powerful new application of CIVA, a number of failure analysis techniques utilizing both the electrical and physical properties of the failing microcontrollers were employed to identify and confirm the open contacts. These techniques are reviewed and recommendations are given for improved pellicle/reticle inspection.

Impedance learning for robotic contact tasks using natural actor-critic algorithm.

Science.gov (United States)

Kim, Byungchan; Park, Jooyoung; Park, Shinsuk; Kang, Sungchul

2010-04-01

Compared with their robotic counterparts, humans excel at various tasks by using their ability to adaptively modulate arm impedance parameters. This ability allows us to successfully perform contact tasks even in uncertain environments. This paper considers a learning strategy of motor skill for robotic contact tasks based on a human motor control theory and machine learning schemes. Our robot learning method employs impedance control based on the equilibrium point control theory and reinforcement learning to determine the impedance parameters for contact tasks. A recursive least-square filter-based episodic natural actor-critic algorithm is used to find the optimal impedance parameters. The effectiveness of the proposed method was tested through dynamic simulations of various contact tasks. The simulation results demonstrated that the proposed method optimizes the performance of the contact tasks in uncertain conditions of the environment.

Two-year follow-up survey of patients with allergic contact dermatitis from an occupational cohort

DEFF Research Database (Denmark)

Clemmensen, Kim Katrine Bjerring; Carøe, T K; Thomsen, S F

2014-01-01

patients with relevant rubber allergy (contact allergy to rubber chemicals or contact urticaria from latex) or epoxy allergy were identified. Follow-up consisted of a questionnaire covering current severity of eczema, employment, exposure and quality of life. RESULTS: The response rate was 75%. Clearance...

37 CFR 10.33 - Direct contact with prospective clients.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Direct contact with prospective clients. 10.33 Section 10.33 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND... clients. A practitioner may not solicit professional employment from a prospective client with whom the...

Polymer-interaction driven diffusionof eyeshadow in soft contact lenses.

Science.gov (United States)

Tavazzi, Silvia; Rossi, Alessandra; Picarazzi, Sara; Ascagni, Miriam; Farris, Stefano; Borghesi, Alessandro

2017-10-01

Soft contact lenses used for the correction of ametropia are often made of hydrogel and silicone-hydrogel materials. Since they are placed directly on the surface of the eye and they are hydrated by tears, eye cosmetics can compromise the lens performance and, even worse, can be transported from an external environment to the ocular surface through the contact lens. The diffusion of the dye component of a purple eyeshadow in soft contact lenses of different materials is here evaluated. Diffusivity is found to be typically higher in silicone-hydrogels than in hydrogels. In hydrogels, diffusivity is greater in the case of lower oxygen transmissibility. Despite differences between materials, absorbed mass of dye is much larger (10-100 times) than the expected mass by simple hydration and swelling of the contact lens. The most contaminated materials are also resistant to cleaning solutions. The results indicate that, notwithstanding the complexity of contact lens networks, diffusion of dye is found to follow Fick's law and it is driven by polymer-dye interaction, which governs lens hydration and swelling. Copyright © 2017 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Self-Employment, Personal Values, and Varieties of Happiness-Unhappiness.

Science.gov (United States)

Warr, Peter

2017-07-27

This study compares personal values and forms of happiness between self-employed workers and those employed in an organization. Values are examined through Schwartz's (1999) established model, and happiness is measured in terms of personal flourishing and both job-specific and general hedonic well-being. In two nationally representative samples, self-employed workers are found to value self-direction and stimulation in their lives to a significantly greater degree than do organizational employees, but not to differ in other types of value. Well-being differences are predicted to depend on whether or not workers supervise others, such that any well-being advantages of self-employment are expected to occur only for self-employed workers without subordinates. As predicted, job satisfaction in self-employment is found to exceed that of organizational workers primarily for those who do not supervise others. In respect of personal flourishing, self-employed workers report significantly greater accomplishment in their lives, and that difference is again found only for workers without supervisory responsibility. However, strain experienced in a job and context-free hedonic well-being are found to be similar between self- and organizational employment. Refinements are proposed to research methods and practical procedures. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Virtual reality job interview training and 6-month employment outcomes for individuals with schizophrenia seeking employment.

Science.gov (United States)

Smith, Matthew J; Fleming, Michael F; Wright, Michael A; Roberts, Andrea G; Humm, Laura Boteler; Olsen, Dale; Bell, Morris D

2015-08-01

Individuals with schizophrenia have low employment rates and the job interview presents a critical barrier for them to obtain employment. Virtual reality training has demonstrated efficacy at improving interview skills and employment outcomes among multiple clinical populations. However, the effects of this training on individuals with schizophrenia are unknown. This study evaluated the efficacy of virtual reality job interview training (VR-JIT) at improving job interview skills and employment outcomes among individuals with schizophrenia in a small randomized controlled trial (n=21 VR-JIT trainees, n=11 waitlist controls). Trainees completed up to 10h of virtual interviews using VR-JIT, while controls received services as usual. Primary outcome measures included two pre-test and two post-test video-recorded role-play interviews scored by blinded raters with expertise in human resources and self-reported interviewing self-confidence. Six-month follow-up data on employment outcomes were collected. Trainees reported that the intervention was easy-to-use, helpful, and prepared them for future interviews. Trainees demonstrated increased role-play scores between pre-test and post-test while controls did not (p=0.001). After accounting for neurocognition and months since prior employment, trainees had greater odds of receiving a job offer by 6month follow-up compared to controls (OR: 8.73, p=0.04) and more training was associated with fewer weeks until receiving a job offer (r=-0.63, pjob interview skills in individuals with schizophrenia. Moreover, trainees had greater odds of receiving a job offer by 6-month follow-up. Future studies could evaluate the effectiveness of VR-JIT within community-based services. Copyright © 2015 Elsevier B.V. All rights reserved.

Subjective employment insecurity around the world

OpenAIRE

Francis Green

2009-01-01

I consider the concept of employment insecurity and provide new evidence for 1997 and 2005 for many countries with widely differing institutional contexts and at varying stages of development. There are no grounds for accepting that workplaces were going through a sea-change in employment insecurity. Workers in transitional economies and developing economies worried the most about insecurity. Perceived insecurity tended to be greater for women, for less-educated and for older workers. However...

Occupational contact urticaria and protein contact dermatitis.

Science.gov (United States)

Doutre, Marie-Sylvie

2005-01-01

Irritant dermatitis and eczema are the most prevalent occupational skin diseases. Less common are immediate contact reactions such as contact urticaria and protein contact dermatitis. Occupational contact urticaria can be subdivided into two categories, immunological and non immunological. However, some agents can induce these two types of reactions. Contact urticaria to natural rubber latex is particularly frequent among health care personnel, but contact urticaria to a wide variety of other substances occurs in many other occupations. Among those at risk are cooks, bakers, butchers, restaurant personnel, veterinarians, hairdressers, florists, gardeners, and forestry workers. Protein contact dermatitis in some of these occupations is caused principally by proteins of animal or plant origin, especially among individuals with a history of atopic dermatitis. Diagnosis requires careful interrogation, clinical examination and skin tests (open tests and prick tests with immediate lecture) to identify a particular contact allergen.

Reducing Ageism: Education About Aging and Extended Contact With Older Adults.

Science.gov (United States)

Lytle, Ashley; Levy, Sheri R

2017-11-19

Ageism is of increasing concern due to the growing older population worldwide and youth-centered focus of many societies. The current investigation tested the PEACE (Positive Education about Aging and Contact Experiences) model for the first time. Two online experimental studies examined 2 key factors for reducing ageism: education about aging (providing accurate information about aging) and extended contact (knowledge of positive intergenerational contact) as well as their potential combined effect (education plus extended contact). In Study 1, 354 undergraduates in all 3 experimental conditions (vs. control participants) reported less negative attitudes toward older adults (delayed post-test) and greater aging knowledge (immediate and delayed post-tests), when controlling for pre-study attitudes. In Study 2, 505 national community participants (ages 18-59) in all experimental conditions (vs. control participants) reported less negative attitudes toward older adults (immediate post-test) and greater aging knowledge (immediate and delayed post-tests). In summary, across 2 online studies, education about aging and knowledge of intergenerational extended contact improved attitudes toward older adults and aging knowledge. Thus, brief, online ageism-reduction strategies can be an effective way to combat ageism. These strategies hold promise to be tested in other settings, with other samples, and to be elaborated into more in-depth interventions that aim to reduce ageism in everyday culture. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Scaling cost-sharing to wages: how employers can reduce health spending and provide greater economic security.

Science.gov (United States)

Robertson, Christopher T

2014-01-01

In the employer-sponsored insurance market that covers most Americans; many workers are "underinsured." The evidence shows onerous out-of-pocket payments causing them to forgo needed care, miss work, and fall into bankruptcies and foreclosures. Nonetheless, many higher-paid workers are "overinsured": the evidence shows that in this domain, surplus insurance stimulates spending and price inflation without improving health. Employers can solve these problems together by scaling cost-sharing to wages. This reform would make insurance better protect against risk and guarantee access to care, while maintaining or even reducing insurance premiums. Yet, there are legal obstacles to scaled cost-sharing. The group-based nature of employer health insurance, reinforced by federal law, makes it difficult for scaling to be achieved through individual choices. The Affordable Care Act's (ACA) "essential coverage" mandate also caps cost-sharing even for wealthy workers that need no such cap. Additionally, there is a tax distortion in favor of highly paid workers purchasing healthcare through insurance rather than out-of-pocket. These problems are all surmountable. In particular, the ACA has expanded the applicability of an unenforced employee-benefits rule that prohibits "discrimination" in favor of highly compensated workers. A novel analysis shows that this statute gives the Internal Revenue Service the authority to require scaling and to thereby eliminate the current inequities and inefficiencies caused by the tax distortion. The promise is smarter insurance for over 150 million Americans.

Relationship Between Hand Contact Angle and Shoulder Loading During Manual Wheelchair Propulsion by Individuals with Paraplegia.

Science.gov (United States)

Requejo, Philip Santos; Mulroy, Sara J; Ruparel, Puja; Hatchett, Patricia E; Haubert, Lisa Lighthall; Eberly, Valerie J; Gronley, JoAnne K

2015-01-01

Shoulder loading during manual wheelchair propulsion (WCP) contributes to the development of shoulder pain in individuals with spinal cord injury (SCI). To use regression analysis to investigate the relationships between the hand contact angle (location of the hand on the pushrim at initial contact and release during the push phase of the WCP cycle) with propulsion characteristics, pushrim forces, and shoulder kinetics during WCP in individuals with paraplegia. Biomechanical data were collected from 222 individuals (198 men and 24 women) with paraplegia from SCI during WCP on a stationary ergometer at a self-selected speed. The average age of participants was 34.7 years (±9.3), mean time since SCI was 9.3 years (±6.1), and average body weight was 74.4 kg (±15.9). The majority (n = 127; 56%) of participants had lower level paraplegia (T8 to L5) and 95 (42%) had high paraplegia (T2 to T7). Increased push arc (mean = 75.3°) was associated with greater velocity (R = 0.384, P contact angle and hand release angles were equally associated with cycle distance and cadence, whereas a more anterior release angle was associated with greater velocity (R = 0.372, P contact angle was associated with greater posterior shoulder net joint force (R = 0.229, P = .001) and greater flexor net joint moment (R = 0.204, P = .002), whereas a more anterior hand release angle was significantly associated with increased vertical (R = 0.270, P contact and hand release must be considered in WCP training. It is recommended that participants should reach back to initiate contact with the pushrim to maximize push arc but avoid a more anterior hand position at release, because this could increase shoulder load during the push phase of WCP.

Novel Sn-Based Contact Structure for GeTe Phase Change Materials.

Science.gov (United States)

Simchi, Hamed; Cooley, Kayla A; Ding, Zelong; Molina, Alex; Mohney, Suzanne E

2018-05-16

Germanium telluride (GeTe) is a phase change material (PCM) that has gained recent attention because of its incorporation as an active material for radio frequency (RF) switches, as well as memory and novel optoelectronic devices. Considering PCM-based RF switches, parasitic resistances from Ohmic contacts can be a limiting factor in device performance. Reduction of the contact resistance ( R c ) is therefore critical for reducing the on-state resistance to meet the requirements of high-frequency RF applications. To engineer the Schottky barrier between the metal contact and GeTe, Sn was tested as an interesting candidate to alter the composition of the semiconductor near its surface, potentially forming a narrow band gap (0.2 eV) SnTe or a graded alloy with SnTe in GeTe. For this purpose, a novel contact stack of Sn/Fe/Au was employed and compared to a conventional Ti/Pt/Au stack. Two different premetallization surface treatments of HCl and deionized (DI) H 2 O were employed to make a Te-rich and Ge-rich interface, respectively. Contact resistance values were extracted using the refined transfer length method. The best results were obtained with DI H 2 O for the Sn-based contacts but HCl treatment for the Ti/Pt/Au contacts. The as-deposited contacts had the R c (ρ c ) of 0.006 Ω·mm (8 × 10 -9 Ω·cm 2 ) for Sn/Fe/Au and 0.010 Ω·mm (3 × 10 -8 Ω·cm 2 ) for Ti/Pt/Au. However, the Sn/Fe/Au contacts were thermally stable, and their resistance decreased further to 0.004 Ω·mm (4 × 10 -9 Ω·cm 2 ) after annealing at 200 °C. In contrast, the contact resistance of the Ti/Pt/Au stack increased to 0.012 Ω·mm (4 × 10 -8 Ω·cm 2 ). Transmission electron microscopy was used to characterize the interfacial reactions between the metals and GeTe. It was found that formation of SnTe at the interface, in addition to Fe diffusion (doping) into GeTe, is likely responsible for the superior performance of Sn/Fe/Au contacts, resulting in one of the lowest reported

Ultrathin reduced graphene oxide films as transparent top-contacts for light switchable solid-state molecular junctions

DEFF Research Database (Denmark)

Li, Tao; Jevric, Martyn; Hauptmann, Jonas Rahlf

2013-01-01

A new type of solid-state molecular junction is introduced, which employs reduced graphene oxide as a transparent top contact that permits a self-assembled molecular monolayer to be photoswitched in situ, while simultaneously enabling charge-transport measurements across the molecules. The electr......A new type of solid-state molecular junction is introduced, which employs reduced graphene oxide as a transparent top contact that permits a self-assembled molecular monolayer to be photoswitched in situ, while simultaneously enabling charge-transport measurements across the molecules...

Occupational irritant contact dermatitis due to petroleum naphtha

Directory of Open Access Journals (Sweden)

Aslı Aytekin

2014-12-01

Full Text Available Irritant contact dermatitis (ICD is responsible for the vast majority of occupational contact dermatitis and usually seen in professional groups working with wet hand. However, today, with the increasing business lines, employees are exposed to a variety of irritants. Occupational exposure to many chemicals and toxic irritants affect not only the skin, but also the other systems. Therefore, this situation resulting with loss of work and changes in business may become a public health problem. The diagnosis of occupational contact dermatitis should not be limited only with tests for allergens, detailed history of exposure to workplace substances and careful examination of product safety forms are necessary. In addition, by establishing close relationship between occupational physicians and employers, preventive measures should be taken before similar diseases occur in other workers in the same work place. In order to highlight this issue, a 32-year-old male patient working in an invitation card fabric is presented in this case report. Irritant contact dermatitis secondary to “petroleum naphta” was present in the patient’s arms. Another important feature of this case, as far as we know, this is the first case of irritant contact dermatitis due to naphtha in the literature.

Comparing intergroup contact effects on blatant and subtle prejudice in adolescents: a multivariate multilevel model.

Science.gov (United States)

Herrero Olaizola, Juan; Rodríguez Díaz, Francisco Javier; Musitu Ochoa, Gonzalo

2014-01-01

The literature has rarely paid attention to the differential influence of intergroup contact on subtle and blatant prejudice. In this study, we hypothesized that the influence of intergroup contact on subtle prejudice will be smaller than its influence on blatant prejudice. This hypothesis was tested with data from a cross-sectional design on 1,655 school-aged native Spanish adolescents. Prejudice was measured with a shortened version of the Meertens and Pettigrew scale of blatant and subtle prejudice adapted to Spanish adolescent population. Results from multivariate multilevel analyses for correlated outcome variables supported the hypothesis. Students tended to score higher on the subtle prejudice scale; contact with the outgroup was statistically related both to levels of blatant and subtle prejudice; and, the negative relationship of contact with the outgroup and prejudice is greater for blatant prejudice as compared to subtle prejudice. Overall, results provide statistical evidence supporting the greater resistance to change of subtle forms of prejudice.

Simulation of unilateral contact problems departing from the classical boundary problems

International Nuclear Information System (INIS)

Frey, S.L.; Sampaio, R.; Gama, R.M.S. da.

1989-08-01

A numerical algorithm is proposed for simulating unilateral contact problems under the classical elasticity point of view. This simple algorithm may be employed by engineers with a minimum knowledge on classical elasticity. (A.C.A.S.) [pt

Fabrication of surfaces with extremely high contact angle hysteresis from polyelectrolyte multilayer.

Science.gov (United States)

Wang, Liming; Wei, Jingjing; Su, Zhaohui

2011-12-20

High contact angle hysteresis on polyelectrolyte multilayers (PEMs) ion-paired with hydrophobic perfluorooctanoate anions is reported. Both the bilayer number of PEMs and the ionic strength of deposition solutions have significant influence on contact angle hysteresis: higher ionic strength and greater bilayer number cause increased contact angle hysteresis values. The hysteresis values of ~100° were observed on smooth PEMs and pinning of the receding contact line on hydrophilic defects is implicated as the cause of hysteresis. Surface roughness can be used to further tune the contact angle hysteresis on the PEMs. A surface with extremely high contact angle hysteresis of 156° was fabricated when a PEM was deposited on a rough substrate coated with submicrometer scale silica spheres. It was demonstrated that this extremely high value of contact angle hysteresis resulted from the penetration of water into the rough asperities on the substrate. The same substrate hydrophobized by chemical vapor deposition of 1H,1H,2H,2H-perfluorooctyltriethoxysilane exhibits high advancing contact angle and low hysteresis. © 2011 American Chemical Society

The Risk of Contact Lens Wear and the Avoidance of Complications

Directory of Open Access Journals (Sweden)

Farihah Tariq

2013-11-01

Full Text Available Contact lenses are lenses placed on the surface of the cornea to correct refractive errors such as myopia (short-sightedness, hypermetropia (far-sightedness and astigmatism. Lens-related complications are becoming a greater health concern as increasing number of individuals are using them as an alternative to spectacles. Contact lenses alter the natural ocular environment and reduce the efficacy of the innate defences. Although many complications are minor, microbial keratitis is potentially blinding and suspected cases should be rapidly diagnosed and referred to an ophthalmologist for treatment. Several risk factors have been identified with extended wear, poor hand hygiene, inadequate lens and lens-case care being the most significant. Promotion of good contact lens hygiene and practices are essential to reduce the adverse effects of contact lens wear.

A review of technology-assisted self-help and minimal contact therapies for drug and alcohol abuse and smoking addiction: is human contact necessary for therapeutic efficacy?

Science.gov (United States)

Newman, Michelle G; Szkodny, Lauren E; Llera, Sandra J; Przeworski, Amy

2011-02-01

Technology-based self-help and minimal contact therapies have been proposed as effective and low-cost interventions for addictive disorders, such as nicotine, alcohol, and drug abuse and addiction. The present article reviews the literature published before 2010 on computerized treatments for drug and alcohol abuse and dependence and smoking addiction. Treatment studies are examined by disorder as well as amount of therapist contact, ranging from self-administered therapy and predominantly self-help interventions to minimal contact therapy where the therapist is actively involved in treatment but to a lesser degree than traditional therapy and predominantly therapist-administered treatments involving regular contact with a therapist for a typical number of sessions. In the treatment of substance use and abuse it is concluded that self-administered and predominantly self-help computer-based cognitive and behavioral interventions are efficacious, but some therapist contact is important for greater and more sustained reductions in addictive behavior. Copyright © 2010 Elsevier Ltd. All rights reserved.

Higher Education, Employability and Competitiveness

Science.gov (United States)

Pavlin, Samo; Svetlicic, Marjan

2012-01-01

This paper studies the relationship between competitiveness and higher education systems in Europe. It explores whether more competitive countries have developed more labour-market-oriented systems of higher education (HE) that thereby give their graduates greater short term employability potential. Based on and a large-scale survey among 45.000…

AlGaN channel field effect transistors with graded heterostructure ohmic contacts

Science.gov (United States)

Bajaj, Sanyam; Akyol, Fatih; Krishnamoorthy, Sriram; Zhang, Yuewei; Rajan, Siddharth

2016-09-01

We report on ultra-wide bandgap (UWBG) Al0.75Ga0.25N channel metal-insulator-semiconductor field-effect transistors (MISFETs) with heterostructure engineered low-resistance ohmic contacts. The low intrinsic electron affinity of AlN (0.6 eV) leads to large Schottky barriers at the metal-AlGaN interface, resulting in highly resistive ohmic contacts. In this work, we use a reverse compositional graded n++ AlGaN contact layer to achieve upward electron affinity grading, leading to a low specific contact resistance (ρsp) of 1.9 × 10-6 Ω cm2 to n-Al0.75Ga0.25N channels (bandgap ˜5.3 eV) with non-alloyed contacts. We also demonstrate UWBG Al0.75Ga0.25N channel MISFET device operation employing the compositional graded n++ ohmic contact layer and 20 nm atomic layer deposited Al2O3 as the gate-dielectric.

Testing and Modeling of Contact Problems in Resistance Welding

DEFF Research Database (Denmark)

Song, Quanfeng

together two or three cylindrical parts as well as disc-ring pairs of dissimilar metals. The tests have demonstrated the effectiveness of the model. A theoretical and experimental study is performed on the contact resistance aiming at a more reliable model for numerical simulation of resistance welding......As a part of the efforts towards a professional and reliable numerical tool for resistance welding engineers, this Ph.D. project is dedicated to refining the numerical models related to the interface behavior. An FE algorithm for the contact problems in resistance welding has been developed...... for the formulation, and the interfaces are treated in a symmetric pattern. The frictional sliding contact is also solved employing the constant friction model. The algorithm is incorporated into the finite element code. Verification is carried out in some numerical tests as well as experiments such as upsetting...

Asbestos-related radiographic findings among household contacts of workers exposed to Libby vermiculite: impact of workers' personal hygiene practices.

Science.gov (United States)

Hilbert, Timothy J; Franzblau, Alfred; Dunning, Kari K; Borton, Eric K; Rohs, Amy M; Lockey, James E

2013-11-01

To explore the potential impact of worker hygiene by determining the prevalence of radiographic changes consistent with asbestos exposure among household contacts of workers exposed to Libby vermiculite that contained amphibole fibers. Workers and household contacts had chest radiographs and completed questionnaires regarding hygiene and potential exposure pathways. Participants included 191 household contacts of 118 workers. One household contact (0.5%) had localized pleural thickening, and three (1.6%) had irregular opacities at profusion category 1/0 or greater. Worker radiographs demonstrated pleural changes in 45% and irregular opacities at profusion category 1/0 or greater in 8%. Libby vermiculite-exposed workers demonstrated an elevated prevalence of pleural and interstitial chest radiographic changes. There was, however, no increased prevalence of similar changes among household contacts, likely because of personal hygiene measures taken by the majority of workers.

Relationship Between Self-Assessed Fidelity and Self-Reported Employment in the Individual Placement and Support Model of Supported Employment.

Science.gov (United States)

Margolies, Paul J; Humensky, Jennifer L; Chiang, I-Chin; Covell, Nancy H; Jewell, Thomas C; Broadway-Wilson, Karen; Gregory, Raymond; Scannevin, Gary; Dixon, Lisa B

2018-05-01

A growing body of literature demonstrates that high-fidelity implementation of the individual placement and support (IPS) model of supported employment increases the chances of achieving desired outcomes. This study examined the relationship between IPS fidelity, as self-reported by program sites, and employment outcomes and determined whether this relationship was maintained over time. A total of 78 outpatient programs in New York State provided data on self-reported IPS fidelity and employment outcomes. Pearson correlations were used to determine the relationship between fidelity scores and competitive employment rates. A mixed-effects model examined the relationship between repeated fidelity and employment measures over time. A significant positive relationship was found between better self-reported IPS fidelity and greater employment. The relationship between IPS fidelity and employment was sustained over time (up to one year). Higher-fidelity implementation of the IPS model, as self-assessed by program sites, was associated with higher employment rates, which were sustained over time.

Prevalence of Pulmonary Tuberculosis among Household Contacts in Hyderabad, Sindh: Active Contact Tracing in Children with Tuberculosis

International Nuclear Information System (INIS)

Sheikh, M.A.; Shah, S.A.A.

2017-01-01

Background: Tuberculosis (TB) in children is clearly linked to TB in adults therefore active household contact tracing is an important method of early diagnosis and treatment particularly in high-TB-burden countries. Objectives: To estimate the prevalence of TB among household contacts of children suffering from tuberculosis using active contact tracing and linking them to TB program for treatment. Subjects and Methods: A total of 125 children suffering from active tuberculosis (index cases)aged 12 years or less were randomly selected from the outpatient department of a tertiary care hospital of Hyderabad. Using their home address, all house hold members of the index cases (sharing one kitchen) were identified. The households were visited by a team including a doctor and the supported staff and were screened for TB using history, physical examination, sputum for AFB and X-ray of chest. Clinical suspects were divided in to two populations, equal to or less than 12 years of age and greater than this age. All suspected cases were brought to outpatient's department of the hospital where children were examined and diagnosed by pediatrician and adults were examined by the pulmonologist. Results: There were 125 children and 1365 household members. Prevalence of active TB in adult household contacts was 8.1 percent and among children was 5.7 percent. Mother, father, grand parents or siblings were the source of disease spread in children. Family history of TB was present in 95 percent (pulmonary 78 percent, extra-pulmonary 22 percent). Conclusion: Tuberculosis in children is mostly spreading from household member hence deeply required to undertake active contact tracing in each new case that is diagnosed or being treated. Policy message: National and Provincial TB programs should advocate and undertake active screening of all household contacts of all TB cases. (author)

[Tonometry with a new non-contact tonometer].

Science.gov (United States)

Langmann, G; Schuhmann, G; Langmann, A; Zenz, H

1990-11-01

We conducted comparative measurements with 100 healthy probands and patients suffering of glaucoma with both a Goldmann Applanation Tonometer (GAT) and the new Keeler Non Contact Tonometer (NCT). A noticeable conformity of mean values in the group I with values under 23 mm Hg and in group II with values greater or equal 23 mm Hg was obvious. The results of three NCT measurement values were compared with those of four measurements. The Keeler NCT nearly fulfills the needed criteria for the first group with pressure under 23 mm Hg except for a high standard deviation. In group II (pressure greater or equal 23 mm Hg) the demanded nominal values are exceeded.

Molecular dynamics study of contact mechanics: contact area and interfacial separation from small to full contact

OpenAIRE

Yang, C.; Persson, B. N. J.

2007-01-01

We report a molecular dynamics study of the contact between a rigid solid with a randomly rough surface and an elastic block with a flat surface. We study the contact area and the interfacial separation from small contact (low load) to full contact (high load). For small load the contact area varies linearly with the load and the interfacial separation depends logarithmically on the load. For high load the contact area approaches to the nominal contact area (i.e., complete contact), and the i...

Optimal contact definition for reconstruction of Contact Maps

Directory of Open Access Journals (Sweden)

Stehr Henning

2010-05-01

Full Text Available Abstract Background Contact maps have been extensively used as a simplified representation of protein structures. They capture most important features of a protein's fold, being preferred by a number of researchers for the description and study of protein structures. Inspired by the model's simplicity many groups have dedicated a considerable amount of effort towards contact prediction as a proxy for protein structure prediction. However a contact map's biological interest is subject to the availability of reliable methods for the 3-dimensional reconstruction of the structure. Results We use an implementation of the well-known distance geometry protocol to build realistic protein 3-dimensional models from contact maps, performing an extensive exploration of many of the parameters involved in the reconstruction process. We try to address the questions: a to what accuracy does a contact map represent its corresponding 3D structure, b what is the best contact map representation with regard to reconstructability and c what is the effect of partial or inaccurate contact information on the 3D structure recovery. Our results suggest that contact maps derived from the application of a distance cutoff of 9 to 11Å around the Cβ atoms constitute the most accurate representation of the 3D structure. The reconstruction process does not provide a single solution to the problem but rather an ensemble of conformations that are within 2Å RMSD of the crystal structure and with lower values for the pairwise average ensemble RMSD. Interestingly it is still possible to recover a structure with partial contact information, although wrong contacts can lead to dramatic loss in reconstruction fidelity. Conclusions Thus contact maps represent a valid approximation to the structures with an accuracy comparable to that of experimental methods. The optimal contact definitions constitute key guidelines for methods based on contact maps such as structure prediction through

Shoulder Activity Level is Associated With Type of Employment and Income in the Normative Population Without Shoulder Disorders.

Science.gov (United States)

Brophy, Robert H; Lin, Kenneth M; Skillington, S Andrew; Hepper, C Tate; Smith, Matthew V

2016-10-01

sedentary employment (7.0 ± 4.1; mean difference, 1.8; 95% CI, 1.6-1.9; p = 0.0015). Participation in contact (19.9% vs 12.0%; p = 0.006) and overhead sports (25.2% vs 14.2%; p employment. Heavy laborers have higher shoulder activity level, likely directly related to their work. Individuals with higher incomes also have higher shoulder activity level, probably attributable to recreation as evidenced by their greater participation in contact and overhead sports. Independent of the underlying cause, these patients probably are more likely to seek treatment for shoulder disorders and may be more challenging to treat because of their elevated activity level. Future research should focus on how elevated activity level in these populations affects their risk for shoulder disorders, and their use of and outcomes from treatment for these disorders. Level IV, prognostic study.

Contact angle and local wetting at contact line.

Science.gov (United States)

Li, Ri; Shan, Yanguang

2012-11-06

This theoretical study was motivated by recent experiments and theoretical work that had suggested the dependence of the static contact angle on the local wetting at the triple-phase contact line. We revisit this topic because the static contact angle as a local wetting parameter is still not widely understood and clearly known. To further clarify the relationship of the static contact angle with wetting, two approaches are applied to derive a general equation for the static contact angle of a droplet on a composite surface composed of heterogeneous components. A global approach based on the free surface energy of a thermodynamic system containing the droplet and solid surface shows the static contact angle as a function of local surface chemistry and local wetting state at the contact line. A local approach, in which only local forces acting on the contact line are considered, results in the same equation. The fact that the local approach agrees with the global approach further demonstrates the static contact angle as a local wetting parameter. Additionally, the study also suggests that the wetting described by the Wenzel and Cassie equations is also the local wetting of the contact line rather than the global wetting of the droplet.

[Sport injuries in full contact and semi-contact karate].

Science.gov (United States)

Greier, K; Riechelmann, H; Ziemska, J

2014-03-01

Karate enjoys great popularity both in professional and recreational sports and can be classified into full, half and low contact styles. The aim of this study was the analysis of sports injuries in Kyokushinkai (full contact) and traditional Karate (semi-contact). In a retrospective study design, 215 active amateur karateka (114 full contact, 101 semi-contact) were interviewed by means of a standardised questionnaire regarding typical sport injuries during the last 36 months. Injuries were categorised into severity grade I (not requiring medical treatment), grade II (single medical treatment), grade III (several outpatient medical treatments) and grade IV (requiring hospitalisation). In total, 217 injuries were reported in detail. 125 injuries (58%) occurred in full contact and 92 (42%) in semi-contact karate. The time related injury rate of full contact karateka was 1.9/1000 h compared to 1.3/1000 h of semi-contact karateka (p injuries were musculoskeletal contusions (33% full contact, 20% semi-contact), followed by articular sprains with 19% and 16%. The lower extremity was affected twice as often in full contact (40%) as in semi-contact (20%) karate. Training injuries were reported by 80% of the full contact and 77% of the semi-contact karateka. Most injuries, both in training and competition, occurred in kumite. 75% of the reported injuries of full contact and 70% of semi-contact karateka were classified as low grade (I or II). The high rate of injuries during training and kumite (sparring) points to specific prevention goals. The emphasis should be put on proprioceptive training and consistent warm-up. In the actual competition the referees play a vital role regarding prevention. © Georg Thieme Verlag KG Stuttgart · New York.

In vivo cartilage contact deformation in the healthy human tibiofemoral joint.

Science.gov (United States)

Bingham, J T; Papannagari, R; Van de Velde, S K; Gross, C; Gill, T J; Felson, D T; Rubash, H E; Li, G

2008-11-01

In vivo cartilage contact deformation is instrumental for understanding human joint function and degeneration. This study measured the total deformation of contacting articular cartilage in the human tibiofemoral joint during in vivo weight-bearing flexion. Eleven healthy knees were magnetic resonance (MR) scanned and imaged with a dual fluoroscopic system while the subject performed a weight-bearing single-leg lunge. The tibia, femur and associated articulating cartilage were constructed from the MR images and combined with the dual fluoroscopic images to determine in vivo cartilage contact deformation from full extension to 120 degrees of flexion. In both compartments, minimum peak compartmental contact deformation occurred at 30 degrees of flexion (24 +/- 6% medial, 17 +/- 7% lateral) and maximum peak compartmental deformation occurred at 120 degrees of flexion (30 +/- 13% medial, 30 +/- 10% lateral) during the weight-bearing flexion from full extension to 120 degrees. Average medial contact areas and peak contact deformations were significantly greater than lateral compartment values (P In addition, cartilage thickness in regions of contact was on average 1.4- and 1.1-times thicker than the average thickness of the tibial and femoral cartilage surfaces, respectively (P line knowledge for investigating the effects of various knee injuries on joint contact biomechanics and the aetiology of cartilage degeneration.

Convergence and divergence in leisure style among Whites and African Americans: toward an interracial contact hypothesis

Science.gov (United States)

Floyd F. Myron; Kimberly J. Shinew

1999-01-01

Drawing upon structural theory and social group perspectives, this study examined two propositions developed to explain the relationship between interracial contact and leisure preferences among African Americans and Whites. The first proposition stated that as interracial contact increases, the greater the probability of observing similarity in the leisure...

A method to measure internal contact angle in opaque systems by magnetic resonance imaging.

Science.gov (United States)

Zhu, Weiqin; Tian, Ye; Gao, Xuefeng; Jiang, Lei

2013-07-23

Internal contact angle is an important parameter for internal wettability characterization. However, due to the limitation of optical imaging, methods available for contact angle measurement are only suitable for transparent or open systems. For most of the practical situations that require contact angle measurement in opaque or enclosed systems, the traditional methods are not effective. Based upon the requirement, a method suitable for contact angle measurement in nontransparent systems is developed by employing MRI technology. In the Article, the method is demonstrated by measuring internal contact angles in opaque cylindrical tubes. It proves that the method also shows great feasibility in transparent situations and opaque capillary systems. By using the method, contact angle in opaque systems could be measured successfully, which is significant in understanding the wetting behaviors in nontransparent systems and calculating interfacial parameters in enclosed systems.

A Simple Approach for Local Contact Angle Determination on a Heterogeneous Surface

KAUST Repository

Wu, Jinbo; Zhang, Mengying; Wang, Xiang; Li, Shunbo; Wen, Weijia

2011-01-01

We report a simple approach for measuring the local contact angle of liquids on a heterogeneous surface consisting of intersected hydrophobic and hydrophilic patch arrays, specifically by employing confocal microscopy and the addition of a very low

Contact and Non-contact Measurements of Grinding Pins

Directory of Open Access Journals (Sweden)

Magdziak Marek

2015-01-01

Full Text Available The paper presents the results of contact and non-contact measurements of external profiles of selected grinding pins. The measurements were conducted in order to choose the appropriate measuring technique in the case of the considered measurement task. In the case of contact measurements the coordinate measuring machine ACCURA II was applied. The used coordinate measuring machine was equipped with the contact scanning probe VAST XT and the Calypso inspection software. Contact coordinate measurements were performed by using of different measurement strategies. The applied strategies included different scanning velocities and distances between measured points. Non-contact measurements were conducted by means of the tool presetter produced by the Mahr company. On the basis of gained results the guidelines concerning measurements of grinding pins were formulated. The measurements of analyzed grinding pins performed by means of the non-contact measuring system are characterized by higher reproducibility than the contact measurements. The low reproducibility of contact measurements may be connected with the inaccuracy of the selected coordinate measuring machine and the measuring probe, the measurement parameters and environmental conditions in the laboratory where the coordinate measuring machine is located. Moreover, the paper presents the possible application of results of conducted investigations. The results of non-contact measurements can be used in the simulation studies of grinding processes. The simulations may reduce the costs of machining processes.

The relationship between area deprivation and contact with community intellectual disability psychiatry.

Science.gov (United States)

Nicholson, L; Hotchin, H

2015-05-01

People with intellectual disabilities (ID) have high rates of psychiatric illness and are known to live in more deprived areas than the general population. This study investigated the relationship between area deprivation and contact with ID psychiatry. Psychiatric case notes and electronic records were used to identify all patients who had face-to-face contact with community ID psychiatric services over 1 year in the North East Community Health Partnership of Greater Glasgow and Clyde (estimated population 177,867). The Scottish Index of Multiple Deprivation (SIMD) were determined for the patient sample and for the general population living in the same area. Between 1 June 2012 and 1 June 2013, 184 patients were seen by ID psychiatry over a total of 553 contacts, with valid SIMD data for 179 patients and 543 contacts. Fifty-two per cent of patients (n = 93) lived in the most deprived SIMD decile, and 90.5% (n = 152) in the lowest 5 deciles. Compared with the general population, there were significantly more patients than expected living in the most deprived decile (Fisher's Exact test, P = 0.009) and in the most deprived 5 deciles (Fisher's Exact test, P = 0.001). The median number of contacts was 2 (interquartile range = 1-3). There was no significant association between the number of contacts and SIMD decile. Forty-eight point one per cent (n = 261) of all contacts were with patients living in the most deprived decile and 88.6% (n = 481) in the most deprived 5 deciles. This was significantly more than expected compared with general population data (Fisher's Exact test, P = 0.008 and Fisher's Exact test, P ≤ 0.001). In the area under study, contact with ID psychiatry was greater in more deprived areas. Given the high psychiatric morbidity of people with ID, if services do not adjust for deprivation, this may lead to further discrimination in an already disadvantaged population. © 2014 MENCAP and International Association of the Scientific Study of Intellectual

Self-reported bullying in childhood: relationships with employment in adulthood.

Science.gov (United States)

Sansone, Randy A; Leung, Justin S; Wiederman, Michael W

2013-02-01

To our knowledge, relationships between being bullied in childhood and employment functioning in adulthood have not been previously studied-hence the focus of the present study. Using a cross-sectional approach and a self-report survey methodology in a consecutive sample of 328 internal medicine outpatients, we examined relationships between being bullied (i.e., have you ever been bullied, how many years, how many bullies) and history of employment (i.e., since age 18, number of full-time jobs, percentage of time employed, ever paid "under the table," and ever fired). Participants reporting a history of having been bullied reported a relatively greater number of different jobs as well as a greater likelihood of having been "paid under the table" and having been fired. While the number of years bullied evidenced no statistically significant correlations with employment variables, the number of different bullies was statistically significantly correlated with the number of different jobs held and ever having been fired. Findings indicate a relationship between being bullied in childhood and experiencing reduced employment viability in adulthood.

Whites but Not Blacks Gain Life Expectancy from Social Contacts

Directory of Open Access Journals (Sweden)

Shervin Assari

2017-10-01

Full Text Available Background. Recent research suggests that the health gain from economic resources and psychological assets may be systematically larger for Whites than Blacks. Aim. This study aimed to assess whether the life expectancy gain associated with social contacts over a long follow up differs for Blacks and Whites. Methods. Data came from the Americans’ Changing Lives (ACL Study, 1986–2011. The sample was a nationally representative sample of American adults 25 and older, who were followed for up to 25 years (n = 3361. Outcome was all-cause mortality. The main predictor was social contacts defined as number of regular visits with friends, relatives, and neighbors. Baseline demographics (age and gender, socioeconomic status (education, income, and employment, health behaviors (smoking and drinking, and health (chronic medical conditions, obesity, and depressive symptoms were controlled. Race was the focal moderator. Cox proportional hazard models were used in the pooled sample and based on race. Results. More social contacts predicted higher life expectancy in the pooled sample. A significant interaction was found between race and social contacts, suggesting that the protective effect of more social contacts is smaller for Blacks than Whites. In stratified models, more social contacts predicted an increased life expectancy for Whites but not Blacks. Conclusion. Social contacts increase life expectancy for White but not Black Americans. This study introduces social contacts as another social resource that differentially affects health of Whites and Blacks.

Employment and physical activity in the U.S.

Science.gov (United States)

Van Domelen, Dane R; Koster, Annemarie; Caserotti, Paolo; Brychta, Robert J; Chen, Kong Y; McClain, James J; Troiano, Richard P; Berrigan, David; Harris, Tamara B

2011-08-01

Physical inactivity is a risk factor for obesity, cardiovascular disease, hypertension, and other chronic diseases that are increasingly prevalent in the U.S. and worldwide. Time at work represents a major portion of the day for employed people. To determine how employment status (full-time, part-time, or not employed) and job type (active or sedentary) are related to daily physical activity levels in American adults. Cross-sectional data from the National Health and Nutrition Examination Survey (NHANES) were collected in 2003-2004 and analyzed in 2010. Physical activity was measured using Actigraph uniaxial accelerometers, and participants aged 20-60 years with ≥4 days of monitoring were included (N=1826). Accelerometer variables included mean counts/minute during wear time and proportion of wear time spent in various intensity levels. In men, full-time workers were more active than healthy nonworkers (p=0.004), and in weekday-only analyses, even workers with sedentary jobs were more active (p=0.03) and spent less time sedentary (pmen, women with full-time sedentary jobs spent more time sedentary (p=0.008) and had less light and lifestyle intensity activity than healthy nonworkers on weekdays. Within full-time workers, those with active jobs had greater weekday activity than those with sedentary jobs (22% greater in men, 30% greater in women). In men, full-time employment, even in sedentary occupations, is positively associated with physical activity compared to not working, and in both genders job type has a major bearing on daily activity levels. Copyright © 2011. Published by Elsevier Inc.

Parkinson's disease: a population-based investigation of life satisfaction and employment.

Science.gov (United States)

Gustafsson, Helena; Nordström, Peter; Stråhle, Stefan; Nordström, Anna

2015-01-01

To investigate relationships between individuals' socioeconomic situations and quality of life in working-aged subjects with Parkinson's disease. A population-based cohort comprising 1,432 people with Parkinson's disease and 1,135 matched controls, who responded to a questionnaire. Logistic regression analysis was performed to identify factors associated with life satisfaction and likelihood of employment. In multivariate analyses, Parkinson's disease was associated with an increased risk of dissatisfaction with life (odds ratio (OR) = 5.4, 95% confidence interval (95% CI) = 4.2-7.1) and reduced likelihood of employment (OR = 0.30, 95% CI = 0.25-0.37). Employers' support was associated with greater likelihood of employment (p worked full-time. People with Parkinson's disease also more frequently experienced work demands that exceeded their capacity; this factor and unemployment independently correlated with greater risk of dissatisfaction with life (both p life. Employment situation is important for general life satisfaction among working-aged individuals. People with Parkinson's disease appear to find it difficult to meet the challenge of achieving a balanced employment situation.

Women's Employment Status, Coercive Control, and Intimate Partner Violence in Mexico

Science.gov (United States)

Villarreal, Andres

2007-01-01

Findings from previous studies examining the relation between women's employment and the risk of intimate partner violence have been mixed. Some studies find greater violence toward women who are employed, whereas others find the opposite relation or no relation at all. I propose a new framework in which a woman's employment status and her risk of…

Treatment of contact lens related dry eye with antibacterial honey.

Science.gov (United States)

Wong, Daniel; Albietz, Julie M; Tran, Huan; Du Toit, Cimonette; Li, Anita Hui; Yun, Tina; Han, Jee; Schmid, Katrina L

2017-12-01

Contact lens induced dry eye affects approximately 50% of contact lens wearers. The aim was to assess the effects of Manuka (Leptospermum sp.) honey eye drops (Optimel, Melcare, Australia) on dry eye in contact lens wearers. The safety of the honey eye drops in contact lens wear and contact lens wearers' compliance were also evaluated. Prospective, randomised, cross over study, examiner masked, pilot treatment trial. Twenty-four participants aged 20 to 55 years with contact lens related dry eye were recruited and randomised to two treatment groups; 20 completed the study. One group used Optimel eye drops twice a day for two weeks followed by conventional lubricant (Systane Ultra, Alcon) therapy for two weeks; the other group completed the treatments in the reverse order. Before and after each treatment dry eye symptomology, ocular surface inflammation, and tear quantity and quality were assessed. Participants completed a daily log detailing their usage of treatments and any issues. Dry eye symptoms improved significantly after Optimel treatment. Patients with more severe symptoms at baseline showed a greater improvement in symptoms. No significant differences were observed in the objective signs of dry eye; presumably because of the short treatment duration. Seventy-five% of contact lens wearers reported good adherence to Optimel treatment and 95% reported no issues using this product. Optimel Eye Drops reduce the symptoms of dry eye in contact lens wearers and are safe to use. A longer treatment period to assess the effect on clinical signs of dry eye is required. Copyright © 2017 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Temporary Employment and the Future Labor Market Status

Directory of Open Access Journals (Sweden)

Tomas Berglund

2017-06-01

Full Text Available The aim of this article is to describe and explain the development of temporary employment in Sweden between 1992 and 2010, and to investigate the effect of temporary employment for individuals’ future career on the labor market. The article analyzes temporary employees’ status transitions on the labor market using Swedish Labour Force Survey (LFS data for the period 1992–2010. Each cohort consists of 2-year panels and focuses on changes between the first and last measuring points. The findings indicate that the specific type of temporary employment is crucial as regards whether or not it constitutes a stepping-stone toward permanent employment. The chances are greater in the case of, for example, substitutes, but are considerably less in the case of on-call employment. Certain types of temporary employment thus seem to be used by the employer to screen the employability of the employee, while others are used for achieving flexibility

Quality of life and competitive work among adults with severe mental illness: moderating effects of family contact.

Science.gov (United States)

Gold, Paul B

2013-12-01

OBJECTIVE Competitive employment may improve life quality for adults with severe mental illness, but it is not known for whom or under what circumstances. On the basis of previous research demonstrating benefits of family contact for African-American adults with severe mental illness, it was hypothesized that frequent family contact would moderate (enhance) a positive association between competitive employment and global quality of life for a rural sample of predominantly African-American adults. METHODS In a secondary analysis of data collected from a randomized trial of supported employment, a series of nested random regression analyses was conducted to test the hypothesized moderating effect of face-to-face family contact on the association between competitive employment and global quality of life, controlling for severity of psychiatric symptoms and satisfaction with family relations. RESULTS Most of the 143 study participants spent time with a family member at least once a month (80%)-and most at least weekly (60%). Participants who held a competitive job and had face-to-face contact with family members at least weekly reported higher global quality of life than all other study participants. CONCLUSIONS In this rural sample of African-American adults with severe mental illness, competitive work was associated with higher global quality of life only for those who frequently spent time with family members. Research is needed to test the generalizability of this finding to other geographic settings and cultures, as well as the feasibility and effectiveness of formal inclusion of family members in psychosocial rehabilitation interventions.

Combating Prejudice in the Workplace with Contact Theory: The Lived Experiences of Professionals with Disabilities

Directory of Open Access Journals (Sweden)

Paul David Harpur

2014-01-01

Full Text Available People with disabilities often confront barriers in exercising their right to work.  Social model scholarship has recognised that attitude is a key factor in the disablement of people with impairments.  This study reports on 28 semi-structured interviews with professionals with disabilities.  Drawing from their lived experiences and roles in the disability rights movement, the professionals with disabilities interviewed in this study provide unique perspectives on the instances of attitudinal discrimination.  The interviewees discuss the tactics they employ to reduce the negative impact of erroneous stereotypes and the successes of such tactics.  Many of the tactics employed by interviewees reflect strategies discussed in contact theory scholarship.  This study focuses upon contact theory and considers the similarities between this theory and the interventions of interviewees.  Through positing interviewees' tactics in the literature this study is able to analyse possible positive and negative consequences of such interventions.    Keywords: Contact theory, right to work, professionals with disabilities

An elastic-plastic contact model for line contact structures

Science.gov (United States)

Zhu, Haibin; Zhao, Yingtao; He, Zhifeng; Zhang, Ruinan; Ma, Shaopeng

2018-06-01

Although numerical simulation tools are now very powerful, the development of analytical models is very important for the prediction of the mechanical behaviour of line contact structures for deeply understanding contact problems and engineering applications. For the line contact structures widely used in the engineering field, few analytical models are available for predicting the mechanical behaviour when the structures deform plastically, as the classic Hertz's theory would be invalid. Thus, the present study proposed an elastic-plastic model for line contact structures based on the understanding of the yield mechanism. A mathematical expression describing the global relationship between load history and contact width evolution of line contact structures was obtained. The proposed model was verified through an actual line contact test and a corresponding numerical simulation. The results confirmed that this model can be used to accurately predict the elastic-plastic mechanical behaviour of a line contact structure.

Analysis and Ranking of Protein-Protein Docking Models Using Inter-Residue Contacts and Inter-Molecular Contact Maps

KAUST Repository

Oliva, Romina; Chermak, Edrisse; Cavallo, Luigi

2015-01-01

In view of the increasing interest both in inhibitors of protein-protein interactions and in protein drugs themselves, analysis of the three-dimensional structure of protein-protein complexes is assuming greater relevance in drug design. In the many cases where an experimental structure is not available, protein-protein docking becomes the method of choice for predicting the arrangement of the complex. However, reliably scoring protein-protein docking poses is still an unsolved problem. As a consequence, the screening of many docking models is usually required in the analysis step, to possibly single out the correct ones. Here, making use of exemplary cases, we review our recently introduced methods for the analysis of protein complex structures and for the scoring of protein docking poses, based on the use of inter-residue contacts and their visualization in inter-molecular contact maps. We also show that the ensemble of tools we developed can be used in the context of rational drug design targeting protein-protein interactions.

Analysis and Ranking of Protein-Protein Docking Models Using Inter-Residue Contacts and Inter-Molecular Contact Maps

KAUST Repository

Oliva, Romina

2015-07-01

In view of the increasing interest both in inhibitors of protein-protein interactions and in protein drugs themselves, analysis of the three-dimensional structure of protein-protein complexes is assuming greater relevance in drug design. In the many cases where an experimental structure is not available, protein-protein docking becomes the method of choice for predicting the arrangement of the complex. However, reliably scoring protein-protein docking poses is still an unsolved problem. As a consequence, the screening of many docking models is usually required in the analysis step, to possibly single out the correct ones. Here, making use of exemplary cases, we review our recently introduced methods for the analysis of protein complex structures and for the scoring of protein docking poses, based on the use of inter-residue contacts and their visualization in inter-molecular contact maps. We also show that the ensemble of tools we developed can be used in the context of rational drug design targeting protein-protein interactions.

Equilibrium contact angle or the most-stable contact angle?

Science.gov (United States)

Montes Ruiz-Cabello, F J; Rodríguez-Valverde, M A; Cabrerizo-Vílchez, M A

2014-04-01

It is well-established that the equilibrium contact angle in a thermodynamic framework is an "unattainable" contact angle. Instead, the most-stable contact angle obtained from mechanical stimuli of the system is indeed experimentally accessible. Monitoring the susceptibility of a sessile drop to a mechanical stimulus enables to identify the most stable drop configuration within the practical range of contact angle hysteresis. Two different stimuli may be used with sessile drops: mechanical vibration and tilting. The most stable drop against vibration should reveal the changeless contact angle but against the gravity force, it should reveal the highest resistance to slide down. After the corresponding mechanical stimulus, once the excited drop configuration is examined, the focus will be on the contact angle of the initial drop configuration. This methodology needs to map significantly the static drop configurations with different stable contact angles. The most-stable contact angle, together with the advancing and receding contact angles, completes the description of physically realizable configurations of a solid-liquid system. Since the most-stable contact angle is energetically significant, it may be used in the Wenzel, Cassie or Cassie-Baxter equations accordingly or for the surface energy evaluation. © 2013 Elsevier B.V. All rights reserved.

Deposition of lipid, protein, and secretory phospholipase A2 on hydrophilic contact lenses.

Science.gov (United States)

Mochizuki, Hiroshi; Yamada, Masakazu; Hatou, Shin; Kawashima, Motoko; Hata, Seiichiro

2008-01-01

Recent studies have shown that low tear phospholipid levels are associated with tear film instability in hydrophilic contact lens wearers. The concentration of secretory phospholipase A2 (sPLA2), the enzyme that hydrolyzes phospholipids, in tears is known to exceed the levels found in serum by four orders of magnitude. This study was performed to determine the levels of sPLA2 from the deposition on two different frequent-replacement contact lens materials. Polymacon and etafilcon A contact lenses worn for 2 weeks by 16 experienced contact lens wearers were used for the analysis. Total lipids were determined by the sulfo-phospho-vanillin reaction. Phospholipids in lipid extracts were estimated by phosphorus determination with ammonium molybdate through enzymatic digestion. Total protein was measured by bicinchoninic acid analysis. Double-antibody sandwich enzyme-linked immunosorbent assay was used to determine sPLA2 concentrations. Total lipid deposition was found to be greater in the polymacon group (66.3+/-16.3 microg/lens) than in the etafilcon A group, although phospholipids were not detected in either group. The etafilcon A group had greater deposition of protein (3.7+/-0.7 mg/lens) than the polymacon group had. The etafilcon A group deposited statistically significantly more group IIa sPLA2 (1.1+/-0.3 microg/lens) than the polymacon group (0.07+/-0.04 microg/lens) did (P<0.001). There was a significant difference in the lipid and protein deposition profiles in the two lenses tested. A significant amount of sPLA2 in the deposition on contact lenses may play a role in tear film instability in hydrophilic contact lens wearers.

The effect of elastic modulus on ablation catheter contact area.

Science.gov (United States)

Camp, Jon J; Linte, Cristian A; Rettmann, Maryam E; Sun, Deyu; Packer, Douglas L; Robb, Richard A; Holmes, David R

2015-02-21

Cardiac ablation consists of navigating a catheter into the heart and delivering RF energy to electrically isolate tissue regions that generate or propagate arrhythmia. Besides the challenges of accurate and precise targeting of the arrhythmic sites within the beating heart, limited information is currently available to the cardiologist regarding intricate electrode-tissue contact, which directly impacts the quality of produced lesions. Recent advances in ablation catheter design provide intra-procedural estimates of tissue-catheter contact force, but the most direct indicator of lesion quality for any particular energy level and duration is the tissue-catheter contact area, and that is a function of not only force, but catheter pose and material elasticity as well. In this experiment, we have employed real-time ultrasound (US) imaging to determine the complete interaction between the ablation electrode and tissue to accurately estimate contact, which will help to better understand the effect of catheter pose and position relative to the tissue. By simultaneously recording tracked position, force reading and US image of the ablation catheter, the differing material properties of polyvinyl alcohol cryogel [1] phantoms are shown to produce varying amounts of tissue depression and contact area (implying varying lesion quality) for equivalent force readings. We have shown that the elastic modulus significantly affects the surface-contact area between the catheter and tissue at any level of contact force. Thus we provide evidence that a prescribed level of catheter force may not always provide sufficient contact area to produce an effective ablation lesion in the prescribed ablation time.

A survey of exposures related to recognized occupational contact dermatitis in Denmark in 2010

DEFF Research Database (Denmark)

Carøe, Tanja Korfitsen; Ebbehøj, Niels; Agner, Tove

2014-01-01

BACKGROUND: Skin diseases are the most commonly recognized occupational diseases in Denmark, and occupational contact dermatitis (OCD) comprises ∼95% of all cases. OBJECTIVES: To prevent occupational contact dermatitis, it is important to specifically identify exposures and work routines related...... to outbreak of the disease. The aim of this study was to give an overview of exposures for patients with occupational contact dermatitis in Denmark in 2010, and relate this to line of work and disease severity. MATERIAL AND METHODS: The study was a descriptive, register-based study including patients......, 1020 women and 484 men, were included in the study. Irritant contact dermatitis accounted for 70% of all cases; 68% of these were caused by wet work. Forty-six per cent of all patients were employed either in the healthcare sector, in cleaning, or as kitchen workers. Among contact allergies, the most...

Bacterial adherence to extended wear soft contact lenses

International Nuclear Information System (INIS)

Aswad, M.I.; John, T.; Barza, M.; Kenyon, K.; Baum, J.

1990-01-01

The authors studied the adherence of Pseudomonas aeruginosa and Staphylococcus aureus to extended wear soft contact lenses (EWSCLs) with and without focal deposits using both a radiolabeling technique and electron microscopy. P. aeruginosa showed significant adherence to contact lenses in vitro. In contrast, S. aureus failed to show significant adherence to contact lenses in vitro (i.e., the radioactive uptake was not significantly above background). The extent of adherence of Pseudomonas was proportional to the number of focal deposits on the lenses. Results of electron microscopic examination showed the bacteria to be adherent primarily to large focal deposits (greater than or equal to 150 microns). There was no pseudomonal adherence to the small focal deposits (less than or equal to 50 microns) and little adherence to the areas in between the focal deposits. The authors hypothesize that worn lenses, especially those with large focal deposits, serve as a vehicle for the transport of P. aeruginosa to the cornea. This hypothesis could be a partial explanation for the high incidence of keratitis caused by P. aeruginosa in EWSCL patients

Reducing contact resistance in graphene devices through contact area patterning.

Science.gov (United States)

Smith, Joshua T; Franklin, Aaron D; Farmer, Damon B; Dimitrakopoulos, Christos D

2013-04-23

Performance of graphene electronics is limited by contact resistance associated with the metal-graphene (M-G) interface, where unique transport challenges arise as carriers are injected from a 3D metal into a 2D-graphene sheet. In this work, enhanced carrier injection is experimentally achieved in graphene devices by forming cuts in the graphene within the contact regions. These cuts are oriented normal to the channel and facilitate bonding between the contact metal and carbon atoms at the graphene cut edges, reproducibly maximizing "edge-contacted" injection. Despite the reduction in M-G contact area caused by these cuts, we find that a 32% reduction in contact resistance results in Cu-contacted, two-terminal devices, while a 22% reduction is achieved for top-gated graphene transistors with Pd contacts as compared to conventionally fabricated devices. The crucial role of contact annealing to facilitate this improvement is also elucidated. This simple approach provides a reliable and reproducible means of lowering contact resistance in graphene devices to bolster performance. Importantly, this enhancement requires no additional processing steps.

Effect of contact and no-contact small-sided games on elite handball players.

Science.gov (United States)

Dello Iacono, Antonio; Martone, Domenico; Zagatto, Alessandro Moura; Meckel, Yoav; Sindiani, Mahmood; Milic, Mirjana; Padulo, Johnny

2018-01-01

This study aimed to investigate the effect of contact (C-SSG) and no-contact (NC-SSG) handball small-sided games (SSGs) on motion patterns and physiological responses of elite handball players. Twelve male handball players performed 10 C-SSG and 10 NC-SSG while being monitored through the heart rate (HR) and rate of perceived exertion (RPE) as physiological responses and time-motion activities profile using video-match analysis. Both game conditions resulted in similar HR responses (P > 0.05), but the NC-SSG led to a higher RPE scores. The time-motion activity analysis featured NC-SSG with a greater amount of walking (855.6 ± 25.1 vs. 690.6 ± 35.2 m) and backward movements (187.5 ± 12.3 vs. 142.5 ± 8.7 m) combined with fast running (232.3 ± 8.5 vs. 159.7 ± 5.7 m) and sprinting (79.5 ± 4.7 vs. 39.7 ± 3.7 m) activities (P handball can effectively represent specifically oriented exercises, according to the sport-task and the performance demands.

Prioritized Contact Transport Stream

Science.gov (United States)

Hunt, Walter Lee, Jr. (Inventor)

2015-01-01

A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

Research on the dynamic response of high-contact-ratio spur gears influenced by surface roughness under EHL condition

Science.gov (United States)

Kang, Huang; Xiong, Yangshou; Wang, Tao; Chen, Qi

2017-01-01

Employing high-contact-ratio (HCR) gear is an effective method of decreasing the load on a single tooth, as well as reducing vibration and noise. While the spindlier tooth leads to greater relative sliding, having more teeth participate in contact at the same time makes the HCR gear more sensitive to the surface quality. Available literature regarding HCR gear primarily investigates the geometrical optimization, load distribution, or efficiency calculation. Limited work has been conducted on the effect of rough surfaces on the dynamic performance of HCR gear. For this reason, a multi-degree-of-freedom (MDOF) model is presented mathematically to characterize the static transmission error based on fractal theory, investigate the relative sliding friction using an EHL-based friction coefficient formula, and detail the time-varying friction coefficient suitable for HCR gear. Based on numerical results, the surface roughness has little influence on system response in terms of the dynamic transmission error but has a large effect on the motion in off-line-of-action (OLOA) direction and friction force. The impact of shaft-bearing stiffness and damping ratio is also explored with results revealing that a greater shaft-bearing stiffness is beneficial in obtaining a more stable motion in OLOA direction, and a larger damping ratio results in a smaller effective friction force. The theory presented in this report outlines a new method of analyzing the dynamics of HCR gear in respect of introducing surface roughness into MDOF model directly, as well as establishing an indirect relationship between dynamic responses and surface roughness. This method is expected to guide surface roughness design and manufacturing in the future.

In the eye of the beholder: eye contact increases resistance to persuasion.

Science.gov (United States)

Chen, Frances S; Minson, Julia A; Schöne, Maren; Heinrichs, Markus

2013-11-01

Popular belief holds that eye contact increases the success of persuasive communication, and prior research suggests that speakers who direct their gaze more toward their listeners are perceived as more persuasive. In contrast, we demonstrate that more eye contact between the listener and speaker during persuasive communication predicts less attitude change in the direction advocated. In Study 1, participants freely watched videos of speakers expressing various views on controversial sociopolitical issues. Greater direct gaze at the speaker's eyes was associated with less attitude change in the direction advocated by the speaker. In Study 2, we instructed participants to look at either the eyes or the mouths of speakers presenting arguments counter to participants' own attitudes. Intentionally maintaining direct eye contact led to less persuasion than did gazing at the mouth. These findings suggest that efforts at increasing eye contact may be counterproductive across a variety of persuasion contexts.

American Contact Dermatitis Society Contact Allergy Management Program: An Epidemiologic Tool to Determine Relative Prevalence of Contact Allergens.

Science.gov (United States)

Scheman, Andrew; Severson, David

2016-01-01

Data on the prevalence of contact allergy in North America are currently reported by groups of academic contact allergy specialists at select academic centers. Sampling of data from numerous centers across North America, including practices performing more limited patch testing, would provide a broader perspective of contact allergen prevalence in North America. The American Contact Dermatitis Society Contact Allergy Management Program is an ideal tool for collection of epidemiologic data regarding contact allergy prevalence in North America. The aim of the study was to identify the relative prevalence of contact allergy to common contact allergens in North America. Mapping of Contact Allergy Management Program (CAMP) data was performed to allow analysis of how frequently searches were performed for various contact allergens. The number of searches performed for specific allergens provides a measure of the relative prevalence of contact allergy to these allergens. The top 35 allergens for the period from November 18, 2012 to November 18, 2013 are reported. Although these data are useful, specific recommendations for minor alterations to CAMP are discussed, which will allow future CAMP data to be stratified and more powerful. With minor modifications, CAMP can provide a quantum leap in the reporting of contact allergy epidemiologic data in North America.

Contact area affects frequency-dependent responses to vibration in the peripheral vascular and sensorineural systems.

Science.gov (United States)

Krajnak, Kristine; Miller, G R; Waugh, Stacey

2018-01-01

Repetitive exposure to hand-transmitted vibration is associated with development of peripheral vascular and sensorineural dysfunctions. These disorders and symptoms associated with it are referred to as hand-arm vibration syndrome (HAVS). Although the symptoms of the disorder have been well characterized, the etiology and contribution of various exposure factors to development of the dysfunctions are not well understood. Previous studies performed using a rat-tail model of vibration demonstrated that vascular and peripheral nervous system adverse effects of vibration are frequency-dependent, with vibration frequencies at or near the resonant frequency producing the most severe injury. However, in these investigations, the amplitude of the exposed tissue was greater than amplitude typically noted in human fingers. To determine how contact with vibrating source and amplitude of the biodynamic response of the tissue affects the risk of injury occurring, this study compared the influence of frequency using different levels of restraint to assess how maintaining contact of the tail with vibrating source affects the transmission of vibration. Data demonstrated that for the most part, increasing the contact of the tail with the platform by restraining it with additional straps resulted in an enhancement in transmission of vibration signal and elevation in factors associated with vascular and peripheral nerve injury. In addition, there were also frequency-dependent effects, with exposure at 250 Hz generating greater effects than vibration at 62.5 Hz. These observations are consistent with studies in humans demonstrating that greater contact and exposure to frequencies near the resonant frequency pose the highest risk for generating peripheral vascular and sensorineural dysfunction.

Adherence of Pseudomonas aeruginosa to contact lenses

International Nuclear Information System (INIS)

Miller, M.J.

1988-01-01

The purpose of this research was to examined the interactions of P. aeruginosa with hydrogel contact lenses and other substrata, and characterize adherence to lenses under various physiological and physicochemical conditions. Isolates adhered to polystyrene, glass, and hydrogel lenses. With certain lens types, radiolabeled cells showed decreased adherence with increasing water content of the lenses, however, this correlation with not found for all lenses. Adherence to rigid gas permeable lenses was markedly greater than adherence to hydrogels. Best adherence occurred near pH 7 and at a sodium chloride concentration of 50 mM. Passive adhesion of heat-killed cells to hydrogels was lower than the adherence obtained of viable cells. Adherence to hydrogels was enhanced by mucin, lactoferrin, lysozyme, IgA, bovine serum albumin, and a mixture of these macromolecules. Adherence to coated and uncoated lenses was greater with a daily-wear hydrogel when compared with an extended-wear hydrogel of similar polymer composition. Greater adherence was attributed to a higher concentration of adsorbed macromolecules on the 45% water-content lens in comparison to the 55% water-content lens

Language Contact.

Science.gov (United States)

Nelde, Peter Hans

1995-01-01

Examines the phenomenon of language contact and recent trends in linguistic contact research, which focuses on language use, language users, and language spheres. Also discusses the role of linguistic and cultural conflicts in language contact situations. (13 references) (MDM)

A Langevin model for fluctuating contact angle behaviour parametrised using molecular dynamics.

Science.gov (United States)

Smith, E R; Müller, E A; Craster, R V; Matar, O K

2016-12-06

Molecular dynamics simulations are employed to develop a theoretical model to predict the fluid-solid contact angle as a function of wall-sliding speed incorporating thermal fluctuations. A liquid bridge between counter-sliding walls is studied, with liquid-vapour interface-tracking, to explore the impact of wall-sliding speed on contact angle. The behaviour of the macroscopic contact angle varies linearly over a range of capillary numbers beyond which the liquid bridge pinches off, a behaviour supported by experimental results. Nonetheless, the liquid bridge provides an ideal test case to study molecular scale thermal fluctuations, which are shown to be well described by Gaussian distributions. A Langevin model for contact angle is parametrised to incorporate the mean, fluctuation and auto-correlations over a range of sliding speeds and temperatures. The resulting equations can be used as a proxy for the fully-detailed molecular dynamics simulation allowing them to be integrated within a continuum-scale solver.

Joint contact loading in forefoot and rearfoot strike patterns during running.

Science.gov (United States)

Rooney, Brandon D; Derrick, Timothy R

2013-09-03

Research concerning forefoot strike pattern (FFS) versus rearfoot strike pattern (RFS) running has focused on the ground reaction force even though internal joint contact forces are a more direct measure of the loads responsible for injury. The main purpose of this study was to determine the internal loading of the joints for each strike pattern. A secondary purpose was to determine if converted FFS and RFS runners can adequately represent habitual runners with regards to the internal joint loading. Using inverse dynamics to calculate the net joint moments and reaction forces and optimization techniques to estimate muscle forces, we determined the axial compressive loading at the ankle, knee, and hip. Subjects consisted of 15 habitual FFS and 15 habitual RFS competitive runners. Each subject ran at a preferred running velocity with their habitual strike pattern and then converted to the opposite strike pattern. Plantar flexor muscle forces and net ankle joint moments were greater in the FFS running compared to the RFS running during the first half of the stance phase. The average contact forces during this period increased by 41.7% at the ankle and 14.4% at the knee joint during FFS running. Peak ankle joint contact force was 1.5 body weights greater during FFS running (pstrike pattern. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comments on "Duality of Female Employment in Pakistan".

Science.gov (United States)

Duncan, A

1991-01-01

Data problems and substantive issues relating to an article on female employment problems in Pakistan are critiqued. It is noted that the emphasis was on demand factors in explaining the level and pattern of female employment, when it is evident that supply and demand are linked by cultural norms which vary among women in their degree of segregation/domestic responsibilities. Productivity and income of women by occupation is also important for policy analysis. The supply factors that affect women according to their income group are level of education, degree of segregation/domestic responsibility, and income/satisfaction level. Employers' biases are clear demand side factors. In the example of the upper income class group, women work due to higher levels of education and experience, their greater liberation from domestic duties, and the professional satisfaction derived from work; constraints are appropriate education and training, employers' gender discrimination, and higher satisfaction from domestic roles. Women's segregation as a supply factor is stronger in middle and low income groups; hence, employment is lower. Income generation is very important among low income groups, which creates a greater force to seek employment, but without the necessary skills or education and with household responsibilities; their employment is predominately in the informal sector with low productivity and income. Policy interventions to increase welfare and productivity must be different for each class or group. For upper income women, employers must not discriminate against women in hiring and firing, and more educational and training opportunities must be provided. In the middle income group, access to education an employment and more employment opportunities in a culturally acceptable framework are needed. Respectability of jobs, for instance in the service sector, is an important factor. In the low income group, productivity increases are the goal. Access to credits, and new

Evaluation of anti-tuberculosis antibodies in healthy contact and non-contacts persons

International Nuclear Information System (INIS)

Aziz, N; Bukhari, M.H; Muneer, M; Tayyab, M; Chaudhry, N.A.

2006-01-01

This study was conducted to see the presence of the antimycobacterial antibodies in healthy household contacts of tuberculosis patients and healthy normal subjects who have never been in contact with tuberculosis patients. A total of 200 subjects, 120 with history of household contact and 80 without such history were included in the study. Routine Haematological investigations were performed and all the sera of 200 subjects were tested who 19M, 19G and IgA anti tuberculosis antibodies using ELISA technique. There was no difference in the average age of the household contacts and non-contacts. The complaints of pyrexia, night sweats and loss of weight was more in house hold contacts as compared to non-contacts. The awareness about BCG vaccination was equal among the household contacts and non-contacts. The combined serological positivity of the household contacts was 65.8% and the combined serological positivity for non-contacts was 34.1%. There was no statistically significant difference in the presence of 19M among household contacts as compared to non-contacts. However both IgG and 19A were present in significantly higher number of household contacts as compared to non contacts. This study concludes that the persons living in the house with a patient suffering from active pulmonary tuberculosis (household contact) have more chances of being infected with Mycobacterium tuberculosis as compared to the healthy non-contacts. (author)

Contact Lens Care

Science.gov (United States)

... Consumers Consumer Information by Audience For Women Contact Lens Care Share Tweet Linkedin Pin it More sharing ... www.fda.gov/medwatch Learn More about Contact Lens Care Other Tips on Contact Lenses Decorative Contact ...

Extending a model of precarious employment: A qualitative study of immigrant workers in Spain.

Science.gov (United States)

Porthé, Victoria; Ahonen, Emily; Vázquez, M Luisa; Pope, Catherine; Agudelo, Andrés Alonso; García, Ana M; Amable, Marcelo; Benavides, Fernando G; Benach, Joan

2010-04-01

Since the 1980s, changes in the labor market have modified power relations between capital and labor, leading to greater levels of precarious employment among workers. Globalization has led to a growth in migration, as people leave their countries in search of work. We aimed to describe the dimensions of precarious employment for immigrant workers in Spain. Qualitative study using analytic induction. Criterion sampling was used to recruit 129 immigrant workers in Spain with documented and undocumented administrative status. Data quality was ensured by triangulation. Immigrant workers reported that precarious employment is characterized by high job instability, a lack of power for negotiating employment conditions, and defenselessness against high labor demands. They described insufficient wages, long working hours, limited social benefits, and difficulty in exercising their rights. Undocumented workers reported greater defenselessness and worse employment conditions. This study allowed us to describe the dimensions of precarious employment in immigrant workers. (c) 2010 Wiley-Liss, Inc.

Social Policy Trends: International Trends in Female Employment Rates

Directory of Open Access Journals (Sweden)

Ronald D. Kneebone

2018-02-01

Full Text Available Women are playing a larger role in the workforce than ever before, but not in the U.S. The employment rate measures the percentage of the adult population of working age (15-64 years that is an active participant in the labour force (full-time or part-time. A high employment rate enables countries to finance government programs with moderate rates of taxation, and in high employment countries there tends to be less pressure on social programs. Countries with low employment rates are less able to fund services and face greater social pressures.The employment rate provides a better measure of economic performance than the unemployment rate because it considers not only individuals who are unemployed but also those who have been discouraged to look for work.

An adaptive EFG-FE coupling method for elasto-plastic contact of rough surfaces

International Nuclear Information System (INIS)

Liu Lan; Liu Geng; Tong Ruiting; Jin Saiying

2010-01-01

Differing from Finite Element Method, the meshless method does not need any mesh information and can arrange nodes freely which is perfectly suitable for adaptive analysis. In order to simulate the contact condition factually and improve computational efficiency, an adaptive procedure for Element-free Galerkin-Finite Element (EFG-FE) coupling contact model is established and developed to investigate the elastoplastic contact performance for engineering rough surfaces. The local adaptive refinement strategy combined with the strain energy gradient-based error estimation model is employed. The schemes, including principle explanation, arithmetic analysis and programming realization, are introduced and discussed. Furthermore, some related parameters on adaptive convergence criterion are researched emphatically, including adaptation-stop criterion, refinement or coarsening criterion which are guided by the relative error in total strain energy with two adjacent stages. Based on pioneering works of the EFG-FE coupling method for contact problems, an adaptive EFG-FE model for asperity contact is studied. Compared with the solutions obtained from the uniform refinement model, the adaptation results indicate that the adaptive method presented in this paper is capable of solving asperity contact problems with excellent calculation accuracy and computational efficiency.

Footwear contact dermatitis from dimethyl fumarate.

Science.gov (United States)

Švecová, Danka; Šimaljakova, Maria; Doležalová, Anna

2013-07-01

Dimethyl fumarate (DMF) is an effective inhibitor of mold growth. In very low concentrations, DMF is a potent sensitizer that can cause severe allergic contact dermatitis (ACD). It has been identified as the agent responsible for furniture contact dermatitis in Europe. The aim of this study was to evaluate patients in Slovakia with footwear ACD associated with DMF, with regard to clinical manifestations, patch test results, and results of chemical analysis of their footwear. Nine patients with suspected footwear contact dermatitis underwent patch testing with the following allergens: samples of their own footwear, commercial DMF, the European baseline, shoe screening, textile and leather dye screening, and industrial biocides series. The results were recorded according to international guidelines. The content of DMF in footwear and anti-mold sachets was analyzed using gas chromatography and mass spectrometry. Acute ACD was observed in nine Caucasian female patients. All patients developed delayed sensitization, as demonstrated by positive patch testing using textile footwear lining. Seven patients were patch tested with 0.1% DMF, and all seven were positive. Chemical analysis of available footwear showed that DMF was present in very high concentrations (25-80 mg/Kg). Dimethyl fumarate is a new footwear allergen and was responsible for severe ACD in our patients. To avoid an increase in the number of cases, the already approved European preventive measures should be accepted and commonly employed. © 2013 The International Society of Dermatology.

Working to Reduce Poverty: A National Subsidized Employment Proposal

OpenAIRE

Indivar Dutta-Gupta; Kali Grant; Julie Kerksick; Dan Bloom; Ajay Chaudry

2018-01-01

Subsidized employment programs that increase labor supply and demand are a proven, underutilized strategy for reducing poverty in the short and long term. These programs use public and private funds to provide workers wage-paying jobs, training, and wraparound services to foster greater labor force attachment while offsetting employers’ cost for wages, on-the-job training, and overhead. This article proposes two new separate but harmonized federal funding streams for subsidized employment tha...

Apparent contact angle and contact angle hysteresis on liquid infused surfaces.

Science.gov (United States)

Semprebon, Ciro; McHale, Glen; Kusumaatmaja, Halim

2016-12-21

We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small but finite ridge, which corresponds to an effective line tension term. We also predict contact angle hysteresis on liquid infused surfaces generated by the pinning of the contact lines by the surface corrugations. Our analytical expressions for both the apparent contact angle and contact angle hysteresis can be interpreted as 'weighted sums' between the contact angles of the infusing liquid relative to the droplet and surrounding gas phases, where the weighting coefficients are given by ratios of the fluid surface tensions.

Evaluation of metal–nanowire electrical contacts by measuring contact end resistance

International Nuclear Information System (INIS)

Park, Hongsik; Beresford, Roderic; Xu, Jimmy; Ha, Ryong; Choi, Heon-Jin; Shin, Hyunjung

2012-01-01

It is known, but often unappreciated, that the performance of nanowire (NW)-based electrical devices can be significantly affected by electrical contacts between electrodes and NWs, sometimes to the extent that it is really the contacts that determine the performance. To correctly understand and design NW device operation, it is thus important to carefully measure the contact resistance and evaluate the contact parameters, specific contact resistance and transfer length. A four-terminal pattern or a transmission line model (TLM) pattern has been widely used to measure contact resistance of NW devices and the TLM has been typically used to extract contact parameters of NW devices. However, the conventional method assumes that the electrical properties of semiconducting NW regions covered by a metal are not changed after electrode formation. In this study, we report that the conventional methods for contact evaluation can give rise to considerable errors because of an altered property of the NW under the electrodes. We demonstrate that more correct contact resistance can be measured from the TLM pattern rather than the four-terminal pattern and correct contact parameters including the effects of changed NW properties under electrodes can be evaluated by using the contact end resistance measurement method. (paper)

The use of contact lens telescopic systems in low vision rehabilitation.

Science.gov (United States)

Vincent, Stephen J

2017-06-01

Refracting telescopes are afocal compound optical systems consisting of two lenses that produce an apparent magnification of the retinal image. They are routinely used in visual rehabilitation in the form of monocular or binocular hand held low vision aids, and head or spectacle-mounted devices to improve distance visual acuity, and with slight modifications, to enhance acuity for near and intermediate tasks. Since the advent of ground glass haptic lenses in the 1930's, contact lenses have been employed as a useful refracting element of telescopic systems; primarily as a mobile ocular lens (the eyepiece), that moves with the eye. Telescopes which incorporate a contact lens eyepiece significantly improve the weight, comesis, and field of view compared to traditional spectacle-mounted telescopes, in addition to potential related psycho-social benefits. This review summarises the underlying optics and use of contact lenses to provide telescopic magnification from the era of Descartes, to Dallos, and the present day. The limitations and clinical challenges associated with such devices are discussed, along with the potential future use of reflecting telescopes incorporated within scleral lenses and tactile contact lens systems in low vision rehabilitation. Copyright © 2017 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Contact-free measurement of the flow field of a liquid metal inside a closed container

OpenAIRE

Heinicke Christiane

2014-01-01

The measurement of flow velocities inside metal melts is particularly challenging. Due to the high temperatures of the melts it is impossible to employ measurement techniques that require either mechanical contact with the melt or are only adaptable to translucent fluids. In the past years a number of electromagnetic techniques have been developed that allows a contact-free measurement of volume flows. One of these techniques is the so-called Lorentz Force Velocimetry (LFV) in which the metal...

Evaporation-induced flow in an inviscid liquid line at any contact angle

Science.gov (United States)

Petsi, A. J.; Burganos, V. N.

2006-04-01

The problem of potential flow inside an evaporating liquid line, shaped as an infinitely long cylindrical segment lying on a flat surface, is considered and an analytical solution is obtained for any contact angle in (0,π) . In this way, microflow details inside linear liquid bodies evaporating on hydrophilic, hydrophobic, and strongly hydrophobic substrates can now be obtained. The mathematical formulation employs the velocity potential and stream function formulations in bipolar coordinates and the solution is obtained using the technique of Fourier transform. Both pinned and depinned contact lines are considered. The solution is applicable to any evaporation mechanism but for illustration purposes numerical results are presented here for the particular case of kinetically controlled evaporation. For hydrophilic substrates, the flow inside the evaporating liquid line is directed towards the edges for pinned contact lines, thus, promoting a coffee stain effect. The opposite flow direction is observed for depinned contact lines. However, for strongly hydrophobic substrates, flow is directed outwards for both pinned and depinned contact lines, but owing to its low magnitude compared to that on hydrophilic substrates, a craterlike colloidal deposit should be expected rather than a ringlike deposit, in agreement with experimental observations.

Contextualizing Intergroup Contact: Do Political Party Cues Enhance Contact Effects?

DEFF Research Database (Denmark)

Sønderskov, Kim Mannemar; Thomsen, Jens Peter Frølund

2015-01-01

This article examines intergroup contact effects in different political contexts. We expand on previous efforts of social psychologists by incorporating the messages of political parties as a contextual trigger of group membership awareness in contact situations. We argue that the focus among...... political parties on us-them categorizations heightens the awareness of group memberships. This focus in turn enhances the positive intergroup contact effect by stimulating majority members to perceive contacted persons as prototypical outgroup members. A multilevel analysis of 22 countries and almost 37......,000 individuals confirms that the ability of intergroup contact to reduce antiforeigner sentiment increases when political parties focus intensively on immigration issues and cultural differences. Specifically, both workplace contact and interethnic friendship become more effective in reducing antiforeigner...

Complex Contact Angles Calculated from Capillary Rise Measurements on Rock Fracture Faces

Science.gov (United States)

Perfect, E.; Gates, C. H.; Brabazon, J. W.; Santodonato, L. J.; Dhiman, I.; Bilheux, H.; Bilheux, J. C.; Lokitz, B. S.

2017-12-01

Contact angles for fluids in unconventional reservoir rocks are needed for modeling hydraulic fracturing leakoff and subsequent oil and gas extraction. Contact angle measurements for wetting fluids on rocks are normally performed using polished flat surfaces. However, such prepared surfaces are not representative of natural rock fracture faces, which have been shown to be rough over multiple scales. We applied a variant of the Wilhelmy plate method for determining contact angle from the height of capillary rise on a vertical surface to the wetting of rock fracture faces by water in the presence of air. Cylindrical core samples (5.05 cm long x 2.54 cm diameter) of Mancos shale and 6 other rock types were investigated. Mode I fractures were created within the cores using the Brazilian method. Each fractured core was then separated into halves exposing the fracture faces. One fracture face from each rock type was oriented parallel to a collimated neutron beam in the CG-1D imaging instrument at ORNL's High Flux Isotope Reactor. Neutron radiography was performed using the multi-channel plate detector with a spatial resolution of 50 μm. Images were acquired every 60 s after a water reservoir contacted the base of the fracture face. The images were normalized to the initial dry condition so that the upward movement of water on the fracture face was clearly visible. The height of wetting at equilibrium was measured on the normalized images using ImageJ. Contact angles were also measured on polished flat surfaces using the conventional sessile drop method. Equilibrium capillary rise on the exposed fracture faces was up to 8.5 times greater than that predicted for polished flat surfaces from the sessile drop measurements. These results indicate that rock fracture faces are hyperhydrophilic (i.e., the height of capillary rise is greater than that predicted for a contact angle of zero degrees). The use of complex numbers permitted calculation of imaginary contact angles for

Measuring contact area in a sliding human finger-pad contact.

Science.gov (United States)

Liu, X; Carré, M J; Zhang, Q; Lu, Z; Matcher, S J; Lewis, R

2018-02-01

The work outlined in this paper was aimed at achieving further understanding of skin frictional behaviour by investigating the contact area between human finger-pads and flat surfaces. Both the static and the dynamic contact areas (in macro- and micro-scales) were measured using various techniques, including ink printing, optical coherence tomography (OCT) and Digital Image Correlation (DIC). In the studies of the static measurements using ink printing, the experimental results showed that the apparent and the real contact area increased with load following a piecewise linear correlation function for a finger-pad in contact with paper sheets. Comparisons indicated that the OCT method is a reliable and effective method to investigate the real contact area of a finger-pad and allow micro-scale analysis. The apparent contact area (from the DIC measurements) was found to reduce with time in the transition from the static phase to the dynamic phase while the real area of contact (from OCT) increased. The results from this study enable the interaction between finger-pads and contact object surface to be better analysed, and hence improve the understanding of skin friction. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Electric contact arcing

International Nuclear Information System (INIS)

Cuthrell, R.E.

1976-01-01

Electrical contacts must function properly in many types of components used in nuclear weapon systems. Design, application, and testing of these components require detailed knowledge of chemical and physical phenomena associated with stockpile storage, stockpile testing, and operation. In the past, investigation of these phenomena has led to significant discoveries on the effects of surface contaminants, friction and wear, and the mechanics of closure on contact performance. A recent investigation of contact arcing phenomena which revealed that, preceding contact closure, arcs may occur at voltages lower than had been previously known is described. This discovery is important, since arcing may damage contacts, and repetitive testing of contacts performed as part of a quality assurance program might produce cumulative damage that would yield misleading life-test data and could prevent proper operation of the contacts at some time in the future. This damage can be avoided by determining the conditions under which arcing occurs, and ensuring that these conditions are avoided in contact testing

Investigation of the Dynamic Contact Angle Using a Direct Numerical Simulation Method.

Science.gov (United States)

Zhu, Guangpu; Yao, Jun; Zhang, Lei; Sun, Hai; Li, Aifen; Shams, Bilal

2016-11-15

A large amount of residual oil, which exists as isolated oil slugs, remains trapped in reservoirs after water flooding. Numerous numerical studies are performed to investigate the fundamental flow mechanism of oil slugs to improve flooding efficiency. Dynamic contact angle models are usually introduced to simulate an accurate contact angle and meniscus displacement of oil slugs under a high capillary number. Nevertheless, in the oil slug flow simulation process, it is unnecessary to introduce the dynamic contact angle model because of a negligible change in the meniscus displacement after using the dynamic contact angle model when the capillary number is small. Therefore, a critical capillary number should be introduced to judge whether the dynamic contact model should be incorporated into simulations. In this study, a direct numerical simulation method is employed to simulate the oil slug flow in a capillary tube at the pore scale. The position of the interface between water and the oil slug is determined using the phase-field method. The capacity and accuracy of the model are validated using a classical benchmark: a dynamic capillary filling process. Then, different dynamic contact angle models and the factors that affect the dynamic contact angle are analyzed. The meniscus displacements of oil slugs with a dynamic contact angle and a static contact angle (SCA) are obtained during simulations, and the relative error between them is calculated automatically. The relative error limit has been defined to be 5%, beyond which the dynamic contact angle model needs to be incorporated into the simulation to approach the realistic displacement. Thus, the desired critical capillary number can be determined. A three-dimensional universal chart of critical capillary number, which functions as static contact angle and viscosity ratio, is given to provide a guideline for oil slug simulation. Also, a fitting formula is presented for ease of use.

State-level employment, accessibility and rurality

Directory of Open Access Journals (Sweden)

Casey Abington

2014-09-01

Full Text Available Employment and economic growth in rural areas as a policy issue has been recently highlighted by the federal government. In August 2011, the White House released a report entitled “Jobs and Economic Security for Rural America”. While the document listed various programs and policies that have reportedly benefited rural America, it also stated that rural communities are still facing many challenges. For example, many rural communities have lower incomes and higher poverty rates than more urban areas. One possible reason for rural communities being at a disadvantage compared to urban areas involves transportation, especially in terms of journey to work. Thus, one can ask how employment rates vary with accessibility, as measured by journey to work times, as well as location (rural versus urban. Using 2007 state level data, OLS analysis is used to examine the relationship between employment rates and journey to work times and rurality. The analysis confirms that employment rates decrease with increased journey to work times. However, measures of rurality were only marginally significant and the negative coefficient on each measure indicates that employment rates decrease with greater urbanization. Improving accessibility between (very rural and larger areas might improve employment opportunities. Although weighing the benefits of such (reduced unemployment against the costs of providing better highways or public transit might lead to a different conclusion.

Arthroscopic management of the contact athlete with instability.

Science.gov (United States)

Harris, Joshua D; Romeo, Anthony A

2013-10-01

The shoulder is the most commonly dislocated joint in the body, with a greater incidence of instability in contact and collision athletes. In contact and collision athletes that have failed nonoperative treatment, the most important factors to consider when planning surgery are amount of bone loss (glenoid, humeral head); patient age; and shoulder hyperlaxity. Clinical outcomes, instability recurrence rate, and return to sport rate are not significantly different between arthroscopic suture anchor and open techniques. Lateral decubitus positioning with distraction and four portal (including seven-degree and 5-o’clock positions) techniques allow for 360-degree access to the glenoid rim, with placement of at least three sutures anchors below 3 o’clock for optimal results. In patients with significant glenoid bone loss (>20%-25%, inverted pear glenoid), open bone augmentation techniques are indicated and arthroscopic techniques are contraindicated. Copyright © 2013 Elsevier Inc. All rights reserved.

New Signal Readout Principle for Solid-Contact Ion-Selective Electrodes.

Science.gov (United States)

Vanamo, Ulriika; Hupa, Elisa; Yrjänä, Ville; Bobacka, Johan

2016-04-19

A novel approach to signal transduction concerning solid-contact ion-selective electrodes (SC-ISE) with a conducting polymer (CP) as the solid contact is investigated. The method presented here is based on constant potential coulometry, where the potential of the SC-ISE vs the reference electrode is kept constant using a potentiostat. The change in the potential at the interface between the ion-selective membrane (ISM) and the sample solution, due to the change in the activity of the primary ion, is compensated with a corresponding but opposite change in the potential of the CP solid contact. This enforced change in the potential of the solid contact results in a transient reducing/oxidizing current flow through the SC-ISE. By measuring and integrating the current needed to transfer the CP to a new state of equilibrium, the total cumulated charge that is linearly proportional to the change of the logarithm of the primary ion activity is obtained. In this work, different thicknesses of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with poly(styrenesulfonate) (PSS) were used as solid contact. Also, coated wire electrodes (CWEs) were included in the study to show the general validity of the new approach. The ISM employed was selective for K(+) ions, and the selectivity of the membrane under implementation of the presented transduction mechanism was confirmed by measurements performed with a constant background concentration of Na(+) ions. A unique feature of this signal readout principle is that it allows amplification of the analytical signal by increasing the capacitance (film thickness) of the solid contact of the SC-ISE.

Artificial pupil versus contralateral balanced contact lens fit for presbyopia correction

Directory of Open Access Journals (Sweden)

Santiago García-Lázaro

2014-04-01

Full Text Available Purpose: To assess and compare the effects of contact lens-based artificial pupil design and contralateral balanced multifocal contact lens combination (CBMCLC on visual performance. Methods: This randomized crossover study conducted at the University of Valencia, Spain included 38 presbyopic patients using an artificial pupil contact lens in the nondominant eye and a CBMCLC. After a month of lens wear, the binocular distance visual acuity (BDVA, binocular near visual acuity (BNVA, defocus curve, binocular distance, and near contrast sensitivity and near stereoacuity (NSA were measured under photopic conditions (85 cd/m2. Moreover, BDVA and binocular distance contrast sensitivity were examined under mesopic conditions (5 cd/m2. Results: Visual acuity at an intermediate distance and near vision was better with the CBMCLC than with the artificial pupil (p<0.05. Statistically significant differences were found in contrast sensitivity between the two types of correction for distance (under mesopic conditions and for near vision, with the CBMCLC exhibiting better results in both cases (p<0.05. The mean NSA values obtained for the artificial pupil contact lens were significantly worse than those for the CBMCLC (p=0.001. Conclusion: The CBMCLC provided greater visual performance in terms of intermediate and near vision compared with the artificial pupil contact lens.

Waist circumference, body mass index, and employment outcomes.

Science.gov (United States)

Kinge, Jonas Minet

2017-07-01

Body mass index (BMI) is an imperfect measure of body fat. Recent studies provide evidence in favor of replacing BMI with waist circumference (WC). Hence, I investigated whether or not the association between fat mass and employment status vary by anthropometric measures. I used 15 rounds of the Health Survey for England (1998-2013), which has measures of employment status in addition to measured height, weight, and WC. WC and BMI were entered as continuous variables and obesity as binary variables defined using both WC and BMI. I used multivariate models controlling for a set of covariates. The association of WC with employment was of greater magnitude than the association between BMI and employment. I reran the analysis using conventional instrumental variables methods. The IV models showed significant impacts of obesity on employment; however, they were not more pronounced when WC was used to measure obesity, compared to BMI. This means that, in the IV models, the impact of fat mass on employment did not depend on the measure of fat mass.

Two-point concrete resistivity measurements: interfacial phenomena at the electrode–concrete contact zone

International Nuclear Information System (INIS)

McCarter, W J; Taha, H M; Suryanto, B; Starrs, G

2015-01-01

Ac impedance spectroscopy measurements are used to critically examine the end-to-end (two-point) testing technique employed in evaluating the bulk electrical resistivity of concrete. In particular, this paper focusses on the interfacial contact region between the electrode and specimen and the influence of contacting medium and measurement frequency on the impedance response. Two-point and four-point electrode configurations were compared and modelling of the impedance response was undertaken to identify and quantify the contribution of the electrode–specimen contact region on the measured impedance. Measurements are presented in both Bode and Nyquist formats to aid interpretation. Concretes mixes conforming to BSEN206-1 and BS8500-1 were investigated which included concretes containing the supplementary cementitious materials fly ash and ground granulated blast-furnace slag. A measurement protocol is presented for the end-to-end technique in terms of test frequency and electrode–specimen contacting medium in order to minimize electrode–specimen interfacial effect and ensure correct measurement of bulk resistivity. (paper)

Does it pay to have a network contact? Social network ties, workplace racial context, and pay outcomes.

Science.gov (United States)

Kmec, Julie A; Trimble, Lindsey B

2009-06-01

This article investigates how social network use to find work affects pay. Analyses using the Multi-City Study of Urban Inequality consider the extent to which a network contact's influence level affects a job applicant's pay, whether this effect differs for white, black, and Latino contacts, and how workplace racial context moderates this relationship. Three main findings emerge. First, having an influential contact--one with hiring authority--compared to having no contact yields higher pay. Second, white and minority contact influence on pay differs: among minority contacts, being an outsider (i.e., someone not employed by the firm to which the applicant applies) is associated with higher pay, but being an employee of the firm--an insider--is not. Third, regardless of workplace racial context, black and Latino contacts' influence is most beneficial when their race/ethnicity is not known to the hiring agent. We offer a new interpretation of the mixed findings with regard to the relationship between social network use and pay.

Implementation of evidence-based supported employment in regional Australia.

Science.gov (United States)

Morris, Adrienne; Waghorn, Geoffrey; Robson, Emma; Moore, Lyndell; Edwards, Emma

2014-06-01

To implement the Individual Placement and Support (IPS) approach at 4 locations in regional New South Wales, Australia. Outcomes attained were compared with a national non-IPS program and with international trials of IPS within and outside the United States. Four IPS programs were established through formal partnerships between mental health services and disability employment services. Ninety-five mental health service clients commenced employment assistance and were tracked for a minimum of 12 months. Two sites achieved good fidelity to IPS principles, and 2 sites achieved fair fidelity. IPS clients had 3.5 times greater odds of attaining 13 weeks' employment than those receiving assistance in the national network of disability employment services. Implementing IPS is challenging in the Australian service delivery context. Factors other than program fidelity appear to contribute to excellent employment outcomes. Further research is needed to identify these factors.

[Eyelid hygiene for contact lens wearers with blepharitis. Comparative investigation of treatment with baby shampoo versus phospholipid solution].

Science.gov (United States)

Khaireddin, R; Hueber, A

2013-02-01

Blepharitis due to Meibom gland dysfunction (MGD) is presumed to be one of the main reasons for dry eye symptoms which occur in up to 50% of contact lens users. Thus, MGD presumably plays an important role in dry eye in contact lens wearers. In the present prospective, randomized and double blind trial the efficacy of two established treatment options for MGD and blepharitis was evaluated in symptomatic contact lens wearers. In this prospective, randomized 2-centre trial 53 symptomatic contact lens wearers suffering from blepharitis were included. Patients were randomly selected for two treatment groups: group A performed lid margin hygiene using the commonly recommended mild baby shampoo (Bübchen Kinder Shampoo-extra augenmild, Bübchen Werk Ewald Hermes Pharmazeutische Fabrik GmbH, Soest, Germany) and group B performed lid margin hygiene using a phospholipid-liposome solution specially designed for lid hygiene (Blepha Cura, Optima, Moosburg/Wang, Germany), each for 4 weeks. Before as well as 4 weeks after initiation of this study the following tests were performed: standardized subjective assessment using the ocular surface disease index, non-invasive break-up time (NIBUT) and objective evaluation of lid-parallel conjunctival folds (LIPCOF) and further lid margin criteria by double blinded evaluation of slit lamp photographs. Of the 53 symptomatic contact lens wearers suffering from blepharitis 21 (39,6%) were randomly selected for treatment group A and 32 (60.4%) for group B. In both treatment groups there was objective and subjective improvement of symptoms of dry eye in contact lens wearers. Interestingly, there was a significantly greater improvement, subjective as well as objective, in treatment group B which used the phospholipidliposome solution for lid margin hygiene compared to group A using baby shampoo. Although both therapies improved symptoms of dry eye due to blepharitis in symptomatic contact lens wearers, patients using phospholipid

The Gender Wage Gap in Paid and Self-Employment in Australia

OpenAIRE

Kristy Eastough; Paul W. Miller

2003-01-01

This paper presents an analysis of the gender wage gap in the highly regulated Australian labour market. It compares wage outcomes in the wage and salary sector with those for the self-employed. Comparisons with the United States are provided. The large gender pay gap in self-employment suggests that the aggregate gender wage differential will not be eliminated solely through wage determination for wage and salary earners. The greater gender wage gap in the self-employed sector may reflect li...

Allergic Contact Dermatitis

Directory of Open Access Journals (Sweden)

Meltem Önder

2009-03-01

Full Text Available Allergic contact dermatitis is the delayed type hypersensitivity reaction to exogenous agents. Allergic contact dermatitis may clinically present acutely after allergen exposure and initial sensitization in a previously sensitized individual. Acute phase is characterized by erythematous, scaly plaques. In severe cases vesiculation and bullae in exposed areas are very characteristic. Repeated or continuous exposure of sensitized individual with allergen result in chronic dermatitis. Lichenification, erythematous plaques, hyperkeratosis and fissuring may develop in chronic patients. Allergic contact dermatitis is very common dermatologic problem in dermatology daily practice. A diagnosis of contact dermatitis requires the careful consideration of patient history, physical examination and patch testing. The knowledge of the clinical features of the skin reactions to various contactans is important to make a correct diagnosis of contact dermatitis. It can be seen in every age, in children textile product, accessories and touch products are common allergens, while in adults allergic contact dermatitis may be related with topical medicaments. The contact pattern of contact dermatitis depends on fashion and local traditions as well. The localization of allergic reaction should be evaluated and patients’ occupation and hobbies should be asked. The purpose of this review is to introduce to our collaques up dated allergic contact dermatitis literatures both in Turkey and in the World.

An adhesive contact mechanics formulation based on atomistically induced surface traction

Energy Technology Data Exchange (ETDEWEB)

Fan, Houfu [Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720 (United States); Ren, Bo [Livermore Software Technology Corporation, 7374 Las Positas Road, Livermore, CA 94551 (United States); Li, Shaofan, E-mail: shaofan@berkeley.edu [Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720 (United States)

2015-12-01

In this work, we have developed a novel multiscale computational contact formulation based on the generalized Derjuguin approximation for continua that are characterized by atomistically enriched constitutive relations in order to study macroscopic interaction between arbitrarily shaped deformable continua. The proposed adhesive contact formulation makes use of the microscopic interaction forces between individual particles in the interacting bodies. In particular, the double-layer volume integral describing the contact interaction (energy, force vector, matrix) is converted into a double-layer surface integral through a mathematically consistent approach that employs the divergence theorem and a special partitioning technique. The proposed contact model is formulated in the nonlinear continuum mechanics framework and implemented using the standard finite element method. With no large penalty constant, the stiffness matrix of the system will in general be well-conditioned, which is of great significance for quasi-static analysis. Three numerical examples are presented to illustrate the capability of the proposed method. Results indicate that with the same mesh configuration, the finite element computation based on the surface integral approach is faster and more accurate than the volume integral based approach. In addition, the proposed approach is energy preserving even in a very long dynamic simulation.

A contact-lens-shaped IC chip technology

International Nuclear Information System (INIS)

Liu, Ching-Yu; Yang, Frank; Teng, Chih-Chiao; Fan, Long-Sheng

2014-01-01

We report on novel contact-lens-shaped silicon integrated circuit chip technology for applications such as forming a conforming retinal prosthesis. This is achieved by means of patterning thin films of high residual stress on top of a shaped thin silicon substrate. Several strategies are employed to achieve curvatures of various amounts. Firstly, high residual stress on a thin film makes a thin chip deform into a designed three-dimensional shape. Also, a series of patterned stress films and ‘petal-shaped’ chips were fabricated and analyzed. Large curvatures can also be formed and maintained by the packaging process of bonding the chips to constraining elements such as thin-film polymer ring structures. As a demonstration, a complementary metal oxide semiconductor transistor (CMOS) image-sensing retina chip is made into a contact-lens shape conforming to a human eyeball 12.5 mm in radius. This non-planar and flexible chip technology provides a desirable device surface interface to soft tissues or non-planar bio surfaces and opens up many other possibilities for biomedical applications. (paper)

Transitioning to employment with a rheumatic disease: the role of independence, overprotection, and social support.

Science.gov (United States)

Jetha, Arif; Badley, Elizabeth; Beaton, Dorcas; Fortin, Paul R; Shiff, Natalie J; Rosenberg, Alan M; Tucker, Lori B; Mosher, Dianne P; Gignac, Monique A M

2014-12-01

To examine perceived independence, overprotection, and support, and their association with the employment participation of young adults with rheumatic disease. One hundred and forty-three young adults, ages 18 to 30 years, with systemic lupus erythematosus (54.5%) and juvenile arthritis (45.5%) completed a 30-min online questionnaire of their work and education experiences. Information collected was demographic, health (e.g., pain, fatigue, disease activity), work context (e.g., career satisfaction, helpfulness of job accommodation/benefits, and workplace activity limitations), and psychosocial (e.g., independence, social support, and overprotection). Log-Poisson regression analysis examined factors associated with employment status. Over half of respondents were employed (59%) and 26% were enrolled in school. Respondents reported moderate to high perceptions of independence and social support. However, 27% reported that "quite a bit" to "a great deal" of overprotection characterized their relationships with those closest to them. At the bivariate level, employed participants and those indicating greater perceived independence reported greater social support and less overprotection. Multivariable analysis revealed that being employed was associated with older age, more job accommodations/benefits perceived as being helpful, and greater perceived independence. This is one of the first studies examining the employment of young adults with rheumatic diseases. Findings highlight the importance of psychosocial perceptions such as independence and overprotection, in addition to support related to working. Additional research is needed to better understand the role of those close to young adults with rheumatic diseases in supporting independence and encouraging employment.

The contact drag of towed demersal fishing gear components

Science.gov (United States)

O'Neill, F. G.; Summerbell, K.; Ivanović, A.

2018-01-01

The contact demersal towed fishing gears make with the seabed can lead to penetration of the substrate, lateral displacement of the sediment and a pressure field transmitted through the sediment. It will also contribute to the overall drag of the fishing gear. Consequently, there can be environmental effects such as habitat alteration and benthic mortality, and impacts to the fuel efficiency of the fishing operation which will affect emissions of nitrogen oxides, sulphur oxides and greenhouse gases such as CO2. Here we present the results of experimental trials that measure the contact drag of a range of elements that represent some of the components of towed demersal gears that are in contact with the seabed. We show that the contact drag of the gear components depends on their weight, geometry, the type of sediment on which they are towed and whether they are rolling or not. As expected, the contact drag of each gear component increases as its weight increases and the drag of fixed elements is greater than that of the rolling ones. The dependence on aspect ratio is more complex and the drag (per unit area) of narrow cylinders is less than that of wider ones when they roll on the finer sediment or are fixed (not permitted to roll) on the coarser sediment. When they roll on the coarse sediment there is no dependence on aspect ratio. Our results also suggest that fixed components may penetrate the seabed to a lesser depth when they are towed at higher speeds but when they roll there is no such relationship.

Nonlinear vibration of rectangular atomic force microscope cantilevers by considering the Hertzian contact theory

Energy Technology Data Exchange (ETDEWEB)

Sadeghi, A., E-mail: a_sadeghi@srbiau.ac.ir [Islamic Azad Univ., Dept. of Mechanical and Aerospace Engineering, Science and Research Branch, Tehran (Iran, Islamic Republic of); Zohoor, H. [Sharif Univ. of Technology, Center of Excellence in Design, Robotics and Automation, Tehran (Iran, Islamic Republic of); The Academy of Sciences if I.R. Iran (Iran, Islamic Republic of)

2010-05-15

The nonlinear flexural vibration for a rectangular atomic force microscope cantilever is investigated by using Timoshenko beam theory. In this paper, the normal and tangential tip-sample interaction forces are found from a Hertzian contact model and the effects of the contact position, normal and lateral contact stiffness, tip height, thickness of the beam, and the angle between the cantilever and the sample surface on the nonlinear frequency to linear frequency ratio are studied. The differential quadrature method is employed to solve the nonlinear differential equations of motion. The results show that softening behavior is seen for most cases and by increasing the normal contact stiffness, the frequency ratio increases for the first mode, but for the second mode, the situation is reversed. The nonlinear-frequency to linear-frequency ratio increases by increasing the Timoshenko beam parameter, but decreases by increasing the contact position for constant amplitude for the first and second modes. For the first mode, the frequency ratio decreases by increasing both of the lateral contact stiffness and the tip height, but increases by increasing the angle α between the cantilever and sample surface. (author)

Experimental investigation on the electrical contact behavior of rolling contact connector

Energy Technology Data Exchange (ETDEWEB)

Chen, Junxing; Yang, Fei, E-mail: yfei2007@mail.xjtu.edu.cn; Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe [State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049 (China)

2015-12-15

Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.

Method of reducing tungsten selectivity to a contact sidewall

International Nuclear Information System (INIS)

Smith, G.C.

1990-01-01

This patent describes a method for forming a contact plug on a surface of a semiconductor body. It comprises: forming a dielectric layer over the surface of the semiconductor body, the dielectric layer having an aperture therethrough with sidewalls comprising silicon nitride; depositing a metal into the aperture in such a manner that the metal deposits upon the silicon nitride of the sidewalls of the aperture at a substantially greater rate than upon the surface of the dielectric layer

Weight gain in newborns submitted to skin-to-skin contact

Directory of Open Access Journals (Sweden)

Ana Karine da Costa Monteiro Souza

Full Text Available ABSTRACT Purpose: to compare the weight gain among newborns submitted to the kangaroo method and those not submitted to it, and to analyze the factors that may influence this gain: length of hospital stay, gestational age, corrected gestational age, birth weight, weight on the first day of follow-up, duration of gastric tube feeding, duration of oral feeding, and type of diet. Methods: a cross-sectional, quantitative study, with 86 newborns divided into two groups: group 1, with 48 neonates undergoing skin-to-skin contact and Group 2, 38 newborns who did not have this contact. Weights were recorded until hospital discharge. Results: a greater weight gain in Group 1, a longer time of hospitalization in Group 2, and a significant difference in weight gain related to the type of diet in Group 2. Conclusion: skin-to-skin contact has a positive influence on weight gain and length of hospital stay of newborns. The use of an infant formula does not influence weight gain for dyads who experienced skin-to-skin contact. Gestational age, corrected gestational age, birth weight, weight on the first day of follow-up, duration of gastric tube feeding, duration of oral feeding are not correlated with weight gain.

Flexible anodized aluminum oxide membranes with customizable back contact materials.

Science.gov (United States)

Nadimpally, B; Jarro, C A; Mangu, R; Rajaputra, S; Singh, V P

2016-12-16

Anodized aluminum oxide (AAO) membranes were fabricated using flexible substrate/carrier material. This method facilitates the use of AAO templates with many different materials as substrates that are otherwise incompatible with most anodization techniques. Thin titanium (Ti) and tungsten (W) layers were employed as interlayer materials. Titanium enhances adhesion. Tungsten not only helps eliminate the barrier layer but also plays a critical role in enabling the use of flexible substrates. The resulting flexible templates provide new, exciting opportunities in photovoltaic and other device applications. CuInSe 2 nanowires were electrochemically deposited into porous AAO templates with molybdenum (Mo) as the back contact material. The feasibility of using any material to form a contact with semiconductor nanowires has been demonstrated for the first time enabling new avenues in photovoltaic applications.

Flexible anodized aluminum oxide membranes with customizable back contact materials

Science.gov (United States)

Nadimpally, B.; Jarro, C. A.; Mangu, R.; Rajaputra, S.; Singh, V. P.

2016-12-01

Anodized aluminum oxide (AAO) membranes were fabricated using flexible substrate/carrier material. This method facilitates the use of AAO templates with many different materials as substrates that are otherwise incompatible with most anodization techniques. Thin titanium (Ti) and tungsten (W) layers were employed as interlayer materials. Titanium enhances adhesion. Tungsten not only helps eliminate the barrier layer but also plays a critical role in enabling the use of flexible substrates. The resulting flexible templates provide new, exciting opportunities in photovoltaic and other device applications. CuInSe2 nanowires were electrochemically deposited into porous AAO templates with molybdenum (Mo) as the back contact material. The feasibility of using any material to form a contact with semiconductor nanowires has been demonstrated for the first time enabling new avenues in photovoltaic applications.

A Response to Proposed Equal Employment Opportunity Commission Regulations on Employer-Sponsored Health, Safety, and Well-Being Initiatives.

Science.gov (United States)

2016-03-01

The aim of this study was to identify areas of consensus in response to proposed Equal Employment Opportunity Commission Americans with Disabilities Act of 1990 and Genetic Information Nondiscrimination Act of 2008 regulations on employer-sponsored health, safety, and well-being initiatives. The consensus process included review of existing and proposed regulations, identification of key areas where consensus is needed, and a methodical consensus-building process. Stakeholders representing employees, employers, consulting organizations, and wellness providers reached consensus around five areas, including adequate privacy notice on how medical data are collected, used, and protected; effective, equitable use of inducements that influence participation in programs; observance of reasonable alternative standards; what constitutes reasonably designed programs; and the need for greater congruence between federal agency regulations. Employee health and well-being initiatives that are in accord with federal regulations are comprehensive, evidence-based, and are construed as voluntary by employees and regulators alike.

CONTACT RESISTANCE MODELING

Directory of Open Access Journals (Sweden)

S. V. LOSKUTOV

2018-05-01

Full Text Available Purpose. To determine the contribution of the real contact spots distribution in the total conductivity of the conductors contact. Methodology. The electrical contact resistance research was carried out on models. The experimental part of this work was done on paper with a graphite layer with membranes (the first type and conductive liquids with discrete partitions (the second type. Findings. It is shown that the contact electrical resistance is mainly determined by the real area of metal contact. The experimental dependence of the electrical resistance of the second type model on the distance between the electrodes and the potential distribution along the sample surface for the first type model were obtained. The theoretical model based on the principle of electric field superposition was considered. The dependences obtained experimentally and calculated by using the theoretical model are in good agreement. Originality. The regularity of the electrical contact resistance formation on a large number of membranes was researched for the first time. A new model of discrete electrical contact based on the liquid as the conducting environment with nuclear membrane partitions was developed. The conclusions of the additivity of contact and bulk electrical resistance were done. Practical value. Based on these researches, a new experimental method of kinetic macroidentation that as a parameter of the metal surface layer deformation uses the real contact area was developed. This method allows to determine the value of average contact stresses, yield point, change of the stress on the depth of deformation depending on the surface treatment.

Working to Reduce Poverty: A National Subsidized Employment Proposal

Directory of Open Access Journals (Sweden)

Indivar Dutta-Gupta

2018-02-01

Full Text Available Subsidized employment programs that increase labor supply and demand are a proven, underutilized strategy for reducing poverty in the short and long term. These programs use public and private funds to provide workers wage-paying jobs, training, and wraparound services to foster greater labor force attachment while offsetting employers’ cost for wages, on-the-job training, and overhead. This article proposes two new separate but harmonized federal funding streams for subsidized employment that would expand automatically when and where economic conditions deteriorate. Participating states and local organizations would be offered generous matching funds to target adult workers most in need and to secure employer participation. The proposal would effectively reduce poverty among workers during work placements, and improve long-term unsubsidized employment and other outcomes for participants and their families.

Effects of material properties on soft contact dynamics

International Nuclear Information System (INIS)

Khurshid, A.; Malik, M.A.; Ghafoor, A.

2009-01-01

The superiority of deformable human fingertips as compared to hard robot gripper fingers for grasping and manipulation has led to a number of investigations with robot hands employing elastomers or materials such as fluids or powders beneath a membrane at the fingertips. In this paper, to analyze the stability of dynamic control of an object grasped between two soft fingertips through a soft interface using the viscoelastic material between the manipulating fingers and a manipulated object is modeled through bond graph method (BGM). The fingers are made viscoelastic by using springs and dampers. Detailed bond graph modeling (BGM) of the contact phenomenon with two soft-finger contacts considered to be placed against each other on the opposite sides of the grasped object as is generally the case in a manufacturing environment is presented. The stiffness of the springs is exploited in order to achieve the stability in the soft-grasping which includes friction between the soft finger contact surfaces and the object, The paper also analyses stability of dynamic control through a soft interface between a manipulating finger and a manipulated object. It is shown in the paper that the system stability depends on the visco-elastic material properties of the soft interface. Method of root locus is used to analyze this phenomenon. The paper shows how the weight of the object coming downward is controlled by the friction between the fingers and the object during the application of contact forces by varying the damping and the stiffness in the soft finger. (author)

Friction and universal contact area law for randomly rough viscoelastic contacts.

Science.gov (United States)

Scaraggi, M; Persson, B N J

2015-03-18

We present accurate numerical results for the friction force and the contact area for a viscoelastic solid (rubber) in sliding contact with hard, randomly rough substrates. The rough surfaces are self-affine fractal with roughness over several decades in length scales. We calculate the contribution to the friction from the pulsating deformations induced by the substrate asperities. We also calculate how the area of real contact, A(v, p), depends on the sliding speed v and on the nominal contact pressure p, and we show how the contact area for any sliding speed can be obtained from a universal master curve A(p). The numerical results are found to be in good agreement with the predictions of an analytical contact mechanics theory.

Current knowledge on biomarkers for contact sensitization and allergic contact dermatitis

DEFF Research Database (Denmark)

Koppes, Sjors A.; Engebretsen, Kristiane A.; Agner, Tove

2017-01-01

Contact sensitization is common and affects up to 20% of the general population. The clinical manifestation of contact sensitization is allergic contact dermatitis. This is a clinical expression that is sometimes difficult to distinguish from other types of dermatitis, for example irritant...... and atopic dermatitis. Several studies have examined the pathogenesis and severity of allergic contact dermatitis by measuring the absence or presence of various biomarkers. In this review, we provide a non-systematic overview of biomarkers that have been studied in allergic contact dermatitis. These include...... genetic variations and mutations, inflammatory mediators, alarmins, proteases, immunoproteomics, lipids, natural moisturizing factors, tight junctions, and antimicrobial peptides. We conclude that, despite the enormous amount of data, convincing specific biomarkers for allergic contact dermatitis are yet...

The family drawings of at-risk children: concurrent relations with contact with incarcerated parents, caregiver behavior, and stress.

Science.gov (United States)

Dallaire, Danielle H; Ciccone, Anne; Wilson, Laura C

2012-01-01

The current study examined children's attachment representations as assessed with their family drawings in relation to contact with an incarcerated or estranged parent, caregiver behavior, and family stress in a high-risk sample of children (N = 44, M (age) = 8.14), 55% of whom had incarcerated parents. Greater phone, mail, and physical contact with an incarcerated parent was associated with more role reversal in children's family drawings. Additional results show that child-reports of more hostile caregiver behavior were associated with greater overall insecurity in their family drawings; child and caregiver reports of stress were associated with increased global pathology and bizarreness/dissociation in children's family drawings. Given the lack of research on concurrent familial-based correlates of ratings made of children's family drawings, these results provide additional insights into children's representations of attachment relationships in early middle childhood. Further, the results regarding contact with incarcerated parents have implications for researchers and clinicians working with families impacted by parental incarceration.

Coordinate transformation in the model of long Josephson contacts: geometrically equivalent contacts

International Nuclear Information System (INIS)

Semerdzhieva, E.G.; Boyadzhiev, T.L.; ); Shukrinov, Yu.M.; Physical Technical Institute Dushanbe, 734063

2005-01-01

The transition from model of long Josephson variable-width contact to the contact model with coordinate-dependent Josephson current amplitude is realized by transforming the coordinates. This sets up a correspondence between Josephson contacts of variable width and quasi-one-dimensional contacts of variable thickness barrier layer. It is shown, that for contacts of exponentially varying width the barrier layer of the corresponding quasi-one-dimensional contact contains the distributed resistive inhomogeneity which is an attractor to magnetic flux vortices. With numerical experiments, a 'critical current-magnetic field' dependence for a resistive microinhomogeneity Josephson contact was plotted, and its comparison with the critical curve for a contact of exponentially varying width was made. Thus, this demonstrates that the distributed inhomogeneity may be replaced by a local one at the JC end what technologically, may offer definite advantages

Simulation Results: Optimization of Contact Ratio for Interdigitated Back-Contact Solar Cells

Directory of Open Access Journals (Sweden)

Vinay Budhraja

2017-01-01

Full Text Available In the fabrication of interdigitated back contact (IBC solar cells, it is very important to choose the right size of contact to achieve the maximum efficiency. Line contacts and point contacts are the two possibilities, which are being chosen for IBC structure. It is expected that the point contacts would give better results because of the reduced recombination rate. In this work, we are simulating the effect of contact size on the performance of IBC solar cells. Simulations were done in three dimension using Quokka, which numerically solves the charge carrier transport. Our simulation results show that around 10% of contact ratio is able to achieve optimum cell efficiency.

Work Overload and Turnover Intention of Junior Auditors in Greater Jakarta, Indonesia

OpenAIRE

Andika Pradana; Imam Salehudin

2015-01-01

This paper aims to analyze how work overload influences turnover intentions of newly hired junior auditors in public accounting offices. Job satisfaction, work related stress and work life conflicts are used as mediating variables between work overload and turnover intention. This study employed 141 auditors from several accounting firms operating in the Greater Jakarta region. The sample was selected using purposive sampling. Three mediation hypotheses were tested using Structural Equation M...

Employee experience of workplace supervisor contact and support during long-term sickness absence.

Science.gov (United States)

Buys, Nicholas J; Selander, John; Sun, Jing

2017-12-07

Workplace support is an important factor in promoting successful return to work. The purpose of this article is to examine relationships between supervisor contact, perceived workplace support and demographic variables among employees on long-term sickness absence. Data were collected from 204 public employees at a municipality in Sweden who had been on long term sickness absence (60 days or more) using a 23 question survey instrument that collected information on demographic variables, supervisor contact and perceived workplace support. Most injured employees (97%) reported having contact with their supervisors during their sickness absence, with a majority (56%) reporting high levels of support, including early (58.6%) and multiple (70.7%) contacts. Most were pleased with amount of contact (68.9%) and the majority had discussed workplace accommodations (68.1%). Employees who self-initiated contact, felt the amount of contact was appropriate, had a personal meeting with their supervisors and discussed workplace adjustments reported experiencing higher levels of support from supervisors. Employees on long-term sickness absence appreciate contact from their supervisors and this is associated with perceived workplace support. However, the amount and employee experience of this contact is important. It needs to be perceived by employees as supportive, which includes a focus on strategies (e.g., work adjustment) to facilitate a return to work. Supervisor training is required in this area to support the return to work process. Implications for Rehabilitation Contact and support from workplace supervisors is important to workers on long-term sickness absence. Employees appreciate frequent contact from supervisors during long-terms sickness absence. Employees appreciate a personal meeting with supervisors and the opportunity to discuss issues related to return to work such as work adjustment. Employers should provide training to supervisors on how to communicate and

First contact diagnosis and management of contact lens-related complications.

Science.gov (United States)

Fagan, Xavier J; Jhanji, Vishal; Constantinou, Marios; Amirul Islam, F M; Taylor, Hugh R; Vajpayee, Rasik B

2012-08-01

To describe the spectrum of contact lens-related problems in cases presenting to a tertiary referral eye hospital. A retrospective case record analysis of 111 eyes of 97 consecutive patients was undertaken over a period of five months at the Royal Victorian Eye and Ear Hospital, Melbourne, Australia. Contact lens-related complications (CLRC) were classified into microbial keratitis, sterile corneal infiltrates, corneal epitheliopathy and contact lens-related red eye (CLARE). Main parameters examined were nature of the first contact, clinical diagnosis, and management pattern. Forty-two percent of the initial presentations were to health care practitioners (HCPs) other than ophthalmologists. Mean duration from the onset of symptoms to presentation was 6.3 ± 10.9 days. Forty-nine percent (n = 54) of patients had an associated risk factor, most commonly overnight use of contact lenses (n = 14, 13 %). Most common diagnosis at presentation was corneal epitheliopathy (68 %) followed by sterile infiltrates (10 %), CLARE (8 %) and microbial keratitis (6 %). No significant differences were found in the pattern of treatment modalities administered by ophthalmologists and other HCPs. HCPs other than ophthalmologists are the first contact for contact lens-related problems in a significant proportion of patients. These HCPs manage the majority of CLRC by direct treatment or immediate referral.

Compliance as factor for prevent complications of using of contact lenses

Directory of Open Access Journals (Sweden)

E. Y. Markova

2015-01-01

Full Text Available The main goal of this study is to identify the role of compliance in the prevention of complications while wearing soft contact lenses (SCL. 2257 patients in the «Center of vision correction contact» were examined. The age of patients was from12 till 46 years. 58 % female, 42 % male. 47.5 % patients were using daily disposable lenses, 52.5 % — lenses of planned replacement: 23.4 % — 2 weeks, 25.1 % — 1 month, 4 % — 3 months. All patients were using SCL for at least 1 year. The benefits of contact lens are compared with the glasses by different authors. However, any contact lens are a foreign body for the eye, which requires special care, and in case of non-compliance with the doctor’s recommendations may cause the complications. This study has shown that compliance among patients using contact lenses is below 50 %. The main reason for noncompliance of patients is the lack of time and attention to the health of patients. For achievement of compliance and prevention of complications of contact lens is recommended to regularly take the following necessary measures: patient education, explaining to him the need for each stage of lens care, which increases motivation. At the same time, the learning process can be demonstrated to have complications arise in the case of disturbances. Optimization of individual therapeutic program, which is the correct selection of contact lenses and care products tailored to the individual needs of the patient, his lifestyle and personal finance. However, the risk of complications depends not only on the doctor or the manufacturer, but to a greater extent on the patient. In other words, compliance — a necessary condition for ensuring the effectiveness of contact lens and avoiding the occurrence of complications.

Characteristics of Student Employment in Croatia

Directory of Open Access Journals (Sweden)

Ivana Čavar

2018-03-01

Full Text Available The article deals with student term-time employment in Croatia, causes of its growing prevalence, its patterns and legal regulation, and finally its effects on the higher education system and labour market. Overview of the theories on combining work and study singled out few relevant factors determining motivations of students for engaging in term-time employment and employment's different academic and professional outcomes, mainly related to the massification of higher education phenomenon (higher number of students and their greater diversity, youth unemployment, and questionable college degree relevance. Although conducted on non-systematic data, gathered from previous research of student population in Croatia and EUROSTUDENT international research on the quality of student life, analysis carried out in this article showed the occurrence of higher education massification and its influence on student employment, especially in the fields of social sciences and humanities. Croatian students' motivations for term-time employment are mainly a wish to improve their living standard and a need for work experience, while their average workload is of low to medium intensity, usually on jobs not at all related to their future profession. Apart from presenting the practice of student work use, this article also gives an overview of its legal regulation in Croatia, and examples of its misuse, i.e., negative implications it may have on student and regular workers.

Contact isotopic- and contact ion-exchange between two adsorbents

International Nuclear Information System (INIS)

Bunzl, K.; Mohan, R.; Haimerl, M.

1975-01-01

The kinetics of contact ion exchange processes between an ion exchange membrane and resin ion exchange beads, stirred in pure water, was investigated. A general criterion was derived, which indicates whether diffusion of the ions between the intermingling electric double layers or the collision frequency between the two adsorbents is the rate dermining step. Since the latter process proved to be rate controlling under our experimental conditions, the corresponding rate equations were derived under various initial and boundary conditions. Experimentally, the kinetics of contact isotopic exchange of Cs + - and Na + -ions as well as of the reverse contact ion exchange process of Cs + -versus Na + -ions were investigated by using Na 22 and Cs 137 radioisotopes. The experiments reveal in quantitative accord with the theory that the rate of collision controlled contact ion exchange processes depends mainly on the 'exchange coefficient', the separation factor and the collision frequency. While the latter two quantities were determined independently by separate experiments, the 'exchange coefficient' was evaluated from a contact isotopic exchange experiment. (orig.) [de

ComplexContact: a web server for inter-protein contact prediction using deep learning

KAUST Repository

Zeng, Hong; Wang, Sheng; Zhou, Tianming; Zhao, Feifeng; Li, Xiufeng; Wu, Qing; Xu, Jinbo

2018-01-01

ComplexContact (http://raptorx2.uchicago.edu/ComplexContact/) is a web server for sequence-based interfacial residue-residue contact prediction of a putative protein complex. Interfacial residue-residue contacts are critical for understanding how proteins form complex and interact at residue level. When receiving a pair of protein sequences, ComplexContact first searches for their sequence homologs and builds two paired multiple sequence alignments (MSA), then it applies co-evolution analysis and a CASP-winning deep learning (DL) method to predict interfacial contacts from paired MSAs and visualizes the prediction as an image. The DL method was originally developed for intra-protein contact prediction and performed the best in CASP12. Our large-scale experimental test further shows that ComplexContact greatly outperforms pure co-evolution methods for inter-protein contact prediction, regardless of the species.

ComplexContact: a web server for inter-protein contact prediction using deep learning

KAUST Repository

Zeng, Hong

2018-05-20

ComplexContact (http://raptorx2.uchicago.edu/ComplexContact/) is a web server for sequence-based interfacial residue-residue contact prediction of a putative protein complex. Interfacial residue-residue contacts are critical for understanding how proteins form complex and interact at residue level. When receiving a pair of protein sequences, ComplexContact first searches for their sequence homologs and builds two paired multiple sequence alignments (MSA), then it applies co-evolution analysis and a CASP-winning deep learning (DL) method to predict interfacial contacts from paired MSAs and visualizes the prediction as an image. The DL method was originally developed for intra-protein contact prediction and performed the best in CASP12. Our large-scale experimental test further shows that ComplexContact greatly outperforms pure co-evolution methods for inter-protein contact prediction, regardless of the species.

ComplexContact: a web server for inter-protein contact prediction using deep learning.

Science.gov (United States)

Zeng, Hong; Wang, Sheng; Zhou, Tianming; Zhao, Feifeng; Li, Xiufeng; Wu, Qing; Xu, Jinbo

2018-05-22

ComplexContact (http://raptorx2.uchicago.edu/ComplexContact/) is a web server for sequence-based interfacial residue-residue contact prediction of a putative protein complex. Interfacial residue-residue contacts are critical for understanding how proteins form complex and interact at residue level. When receiving a pair of protein sequences, ComplexContact first searches for their sequence homologs and builds two paired multiple sequence alignments (MSA), then it applies co-evolution analysis and a CASP-winning deep learning (DL) method to predict interfacial contacts from paired MSAs and visualizes the prediction as an image. The DL method was originally developed for intra-protein contact prediction and performed the best in CASP12. Our large-scale experimental test further shows that ComplexContact greatly outperforms pure co-evolution methods for inter-protein contact prediction, regardless of the species.

Current knowledge on biomarkers for contact sensitization and allergic contact dermatitis.

Science.gov (United States)

Koppes, Sjors A; Engebretsen, Kristiane A; Agner, Tove; Angelova-Fischer, Irena; Berents, Teresa; Brandner, Johanna; Brans, Richard; Clausen, Maja-Lisa; Hummler, Edith; Jakasa, Ivone; Jurakić-Tončic, Ružica; John, Swen M; Khnykin, Denis; Molin, Sonja; Holm, Jan O; Suomela, Sari; Thierse, Hermann-Josef; Kezic, Sanja; Martin, Stefan F; Thyssen, Jacob P

2017-07-01

Contact sensitization is common and affects up to 20% of the general population. The clinical manifestation of contact sensitization is allergic contact dermatitis. This is a clinical expression that is sometimes difficult to distinguish from other types of dermatitis, for example irritant and atopic dermatitis. Several studies have examined the pathogenesis and severity of allergic contact dermatitis by measuring the absence or presence of various biomarkers. In this review, we provide a non-systematic overview of biomarkers that have been studied in allergic contact dermatitis. These include genetic variations and mutations, inflammatory mediators, alarmins, proteases, immunoproteomics, lipids, natural moisturizing factors, tight junctions, and antimicrobial peptides. We conclude that, despite the enormous amount of data, convincing specific biomarkers for allergic contact dermatitis are yet to be described. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Quaternionic contact Einstein structures and the quaternionic contact Yamabe problem

CERN Document Server

Ivanov, Stefan; Vassilev, Dimiter

2014-01-01

A partial solution of the quaternionic contact Yamabe problem on the quaternionic sphere is given. It is shown that the torsion of the Biquard connection vanishes exactly when the trace-free part of the horizontal Ricci tensor of the Biquard connection is zero and this occurs precisely on 3-Sasakian manifolds. All conformal transformations sending the standard flat torsion-free quaternionic contact structure on the quaternionic Heisenberg group to a quaternionic contact structure with vanishing torsion of the Biquard connection are explicitly described. A "3-Hamiltonian form" of infinitesimal conformal automorphisms of quaternionic contact structures is presented.

Molecular dynamics of contact behavior of self-assembled monolayers on gold using nanoindentation

Energy Technology Data Exchange (ETDEWEB)

Fang, Te-Hua [Institute of Mechanical and Electromechanical Engineering National Formosa University, Yunlin 632, Taiwan (China); Chang, Win-Jin, E-mail: changwj@mail.ksu.edu.tw [Department of Mechanical Engineering Kun Shan University, Tainan 710, Taiwan (China); Fan, Yu-Cheng [Institute of Mechanical and Electromechanical Engineering National Formosa University, Yunlin 632, Taiwan (China); Weng, Cheng-I [Department of Mechanical Engineering National Cheng Kung University, Tainan, 710, Taiwan (China)

2009-08-15

Molecular dynamics simulation is used to study nanoindentation of the self-assembled monolayers (SAMs) on an Au surface. The interaction of SAM atoms is described by a general universal force field (UFF), the tight-binding second-moment approximation (TB-SMA) is used for Au substrate, and the Lennard-Jones potential function is employed to describe interaction among the indenter, the SAMs, and the Au substrate atoms. The model consists of a planar Au substrate with n-hexadecanethiol SAM chemisorbed to the substrate. The simulation results show that the contact pressure increases as the SAMs temperature increases. In addition, the contact pressure also increases as the depth and velocity of indentation increase.

Molecular dynamics of contact behavior of self-assembled monolayers on gold using nanoindentation

International Nuclear Information System (INIS)

Fang, Te-Hua; Chang, Win-Jin; Fan, Yu-Cheng; Weng, Cheng-I

2009-01-01

Molecular dynamics simulation is used to study nanoindentation of the self-assembled monolayers (SAMs) on an Au surface. The interaction of SAM atoms is described by a general universal force field (UFF), the tight-binding second-moment approximation (TB-SMA) is used for Au substrate, and the Lennard-Jones potential function is employed to describe interaction among the indenter, the SAMs, and the Au substrate atoms. The model consists of a planar Au substrate with n-hexadecanethiol SAM chemisorbed to the substrate. The simulation results show that the contact pressure increases as the SAMs temperature increases. In addition, the contact pressure also increases as the depth and velocity of indentation increase.

Laser-fired contact formation on metallized and passivated silicon wafers under short pulse durations

Science.gov (United States)

Raghavan, Ashwin S.

while preserving the passivation layer. A mathematical model was developed to accurately predict LFC geometry over a wide range of processing parameters by accounting for transient changes in Al and Si alloy composition within the LFC. Since LFC geometry plays a critical role in device performance, an accurate method to predict contact geometry is an important tool that can facilitate further process development. Dimensionless analysis was also conducted to evaluate the relative importance of heat and mass transfer mechanisms. It is shown that convection plays a dominant role in the heat and mass transfer within the molten pool. Due to convective mass transfer, the contacts are heavily doped with Al and Si within 10 is after contact formation, which contributes to the entire resolidified region behaving as the electrically active LFC. The validated model is also used to determine safe operating regimes during laser processing to avoid excessively high operating temperatures. By maintaining processing temperatures below a critical temperature threshold, the onset of liquid metal expulsion and loss of alloying elements can be avoided. The process maps provide a framework that can be used to tailor LFC geometry for device fabrication. Finally, using various geometric relationships for the rear side contacting scheme for photovoltaic devices, it is shown that by employing hemispherical contacts, the number of LFCs required on the rear side can be reduced 75% while doubling the pitch distance and increasing the passivation fraction. Reducing the number of backside contacts required can have a noteworthy impact of manufacturing throughput. In addition, the analytical models suggest that device performance can be maintained at levels comparable to those achieved for planar contacts when producing three-dimensional contacts. The materials and electrical characterization results, device simulations, and design considerations presented in this thesis indicate that by forming

Contact Dermatitis in Pediatrics.

Science.gov (United States)

Pelletier, Janice L; Perez, Caroline; Jacob, Sharon E

2016-08-01

Contact dermatitis is an umbrella term that describes the skin's reaction to contacted noxious or allergenic substances. The two main categories of contact dermatitis are irritant type and allergic type. This review discusses the signs, symptoms, causes, and complications of contact dermatitis. It addresses the testing, treatment, and prevention of contact dermatitis. Proper management of contact dermatitis includes avoidance measures for susceptible children. Implementation of a nickel directive (regulating the use of nickel in jewelry and other products that come into contact with the skin) could further reduce exposure to the most common allergens in the pediatric population. [Pediatr Ann. 2016;45(8):e287-e292.]. Copyright 2016, SLACK Incorporated.

Racial differences in employment outcomes after traumatic brain injury.

Science.gov (United States)

Arango-Lasprilla, Juan Carlos; Ketchum, Jessica M; Williams, Kelli; Kreutzer, Jeffrey S; Marquez de la Plata, Carlos D; O'Neil-Pirozzi, Therese M; Wehman, Paul

2008-05-01

To examine racial differences in employment status and occupational status 1 year after a traumatic brain injury (TBI). Retrospective study. Longitudinal dataset of the Traumatic Brain Injury Model Systems national database. Subjects with primarily moderate to severe TBI (3468 whites vs 1791 minorities) hospitalized between 1989 and 2005. Not applicable. Employment status (competitively employed or unemployed) and occupational status (professional/managerial, skilled, or manual labor) at 1 year postinjury. Race and/or ethnicity has a significant effect on employment status at 1 year postinjury (chi(1)(2)=58.23, Pstatus, sex, Disability Rating Scale at discharge, marital status, cause of injury, age, and education. The adjusted odds of being unemployed versus competitively employed are 2.17 times (95% confidence interval, 1.78-2.65) greater for minorities than for whites. Race and ethnicity does not have a significant effect on occupational status at 1 year postinjury. With this empirical evidence supporting racial differences in employment outcomes between minorities and whites at 1 year postinjury, priority should be given to tailoring interventions to maximize minority survivors' work-related productivity.

Robust microscale superlubricity under high contact pressure enabled by graphene-coated microsphere

Science.gov (United States)

Liu, Shu-Wei; Wang, Hua-Ping; Xu, Qiang; Ma, Tian-Bao; Yu, Gui; Zhang, Chenhui; Geng, Dechao; Yu, Zhiwei; Zhang, Shengguang; Wang, Wenzhong; Hu, Yuan-Zhong; Wang, Hui; Luo, Jianbin

2017-02-01

Superlubricity of graphite and graphene has aroused increasing interest in recent years. Yet how to obtain a long-lasting superlubricity between graphene layers, under high applied normal load in ambient atmosphere still remains a challenge but is highly desirable. Here, we report a direct measurement of sliding friction between graphene and graphene, and graphene and hexagonal boron nitride (h-BN) under high contact pressures by employing graphene-coated microsphere (GMS) probe prepared by metal-catalyst-free chemical vapour deposition. The exceptionally low and robust friction coefficient of 0.003 is accomplished under local asperity contact pressure up to 1 GPa, at arbitrary relative surface rotation angles, which is insensitive to relative humidity up to 51% RH. This ultralow friction is attributed to the sustainable overall incommensurability due to the multi-asperity contact covered with randomly oriented graphene nanograins. This realization of microscale superlubricity can be extended to the sliding between a variety of two-dimensional (2D) layers.

Projecting social contact matrices in 152 countries using contact surveys and demographic data.

Directory of Open Access Journals (Sweden)

Kiesha Prem

2017-09-01

Full Text Available Heterogeneities in contact networks have a major effect in determining whether a pathogen can become epidemic or persist at endemic levels. Epidemic models that determine which interventions can successfully prevent an outbreak need to account for social structure and mixing patterns. Contact patterns vary across age and locations (e.g. home, work, and school, and including them as predictors in transmission dynamic models of pathogens that spread socially will improve the models' realism. Data from population-based contact diaries in eight European countries from the POLYMOD study were projected to 144 other countries using a Bayesian hierarchical model that estimated the proclivity of age-and-location-specific contact patterns for the countries, using Markov chain Monte Carlo simulation. Household level data from the Demographic and Health Surveys for nine lower-income countries and socio-demographic factors from several on-line databases for 152 countries were used to quantify similarity of countries to estimate contact patterns in the home, work, school and other locations for countries for which no contact data are available, accounting for demographic structure, household structure where known, and a variety of metrics including workforce participation and school enrolment. Contacts are highly assortative with age across all countries considered, but pronounced regional differences in the age-specific contacts at home were noticeable, with more inter-generational contacts in Asian countries than in other settings. Moreover, there were variations in contact patterns by location, with work-place contacts being least assortative. These variations led to differences in the effect of social distancing measures in an age structured epidemic model. Contacts have an important role in transmission dynamic models that use contact rates to characterize the spread of contact-transmissible diseases. This study provides estimates of mixing patterns for

Projecting social contact matrices in 152 countries using contact surveys and demographic data.

Science.gov (United States)

Prem, Kiesha; Cook, Alex R; Jit, Mark

2017-09-01

Heterogeneities in contact networks have a major effect in determining whether a pathogen can become epidemic or persist at endemic levels. Epidemic models that determine which interventions can successfully prevent an outbreak need to account for social structure and mixing patterns. Contact patterns vary across age and locations (e.g. home, work, and school), and including them as predictors in transmission dynamic models of pathogens that spread socially will improve the models' realism. Data from population-based contact diaries in eight European countries from the POLYMOD study were projected to 144 other countries using a Bayesian hierarchical model that estimated the proclivity of age-and-location-specific contact patterns for the countries, using Markov chain Monte Carlo simulation. Household level data from the Demographic and Health Surveys for nine lower-income countries and socio-demographic factors from several on-line databases for 152 countries were used to quantify similarity of countries to estimate contact patterns in the home, work, school and other locations for countries for which no contact data are available, accounting for demographic structure, household structure where known, and a variety of metrics including workforce participation and school enrolment. Contacts are highly assortative with age across all countries considered, but pronounced regional differences in the age-specific contacts at home were noticeable, with more inter-generational contacts in Asian countries than in other settings. Moreover, there were variations in contact patterns by location, with work-place contacts being least assortative. These variations led to differences in the effect of social distancing measures in an age structured epidemic model. Contacts have an important role in transmission dynamic models that use contact rates to characterize the spread of contact-transmissible diseases. This study provides estimates of mixing patterns for societies for which

Contact allergy and allergic contact dermatitis in adolescents: prevalence measures and associations

DEFF Research Database (Denmark)

Mørtz, Charlotte G; Lauritsen, Jens Martin; Bindslev-Jensen, Carsten

2002-01-01

The aims of this cross-sectional study were to establish the prevalence measures of contact allergy and allergic contact dermatitis in 8th grade schoolchildren (aged 12-16 years) in Odense, Denmark, and to examine the associations with atopic dermatitis, inhalant allergy and hand eczema. Contact...... allergy to a standard series allergen was found in 15.2% of schoolchildren. The point prevalence of allergic contact dermatitis was 0.7% and the lifetime prevalence 7.2%, predominantly in girls. The most common contact allergens were nickel (8.6%) and fragrance mix (1.8%). Nickel allergy was clinically...... relevant in 69% and fragrance allergy in 29% of cases. A significant association was found between contact allergy and hand eczema while no association was found between contact allergy and atopic dermatitis or inhalant allergy. In the future this cohort of schoolchildren will be followed with regard...

High speed, self-acting, face-contact shaft seal has low leakage and very low wear

Science.gov (United States)

Zuk, J.; Ludwig, L. P.; Johnson, R. L.

1972-01-01

Design adds gas thrust bearing to face of conventional face seal. Bearing lifts seal's carbon face out of contact after startup and establishes thin gas film between sealing surfaces. Operating pressure and speed capabilities are greater than those of conventional face seals.

Contact assembly of cell-laden hollow microtubes through automated micromanipulator tip locating

International Nuclear Information System (INIS)

Wang, Huaping; Shi, Qing; Guo, Yanan; Li, Yanan; Sun, Tao; Huang, Qiang; Fukuda, Toshio

2017-01-01

This paper presents an automated contact assembly method to fabricate a cell-laden microtube based on accurate locating of the micromanipulator tip. Essential for delivering nutrients in thick engineered tissues, a vessel-mimetic microtube can be precisely assembled through microrobotic contact biomanipulation. The biomanipulation is a technique to spatially order and immobilize cellular targets with high precision. However, due to image occlusion during contact, it is challenging to locate the micromanipulator tip for fully automated assembly. To achieve pixel-wise tracking and locating of the tip in contact, a particle filter algorithm integrated with a determined level set model is employed here. The model ensures precise convergence of the micromanipulator’s contour during occlusion. With the converged active contour, the algorithm is able to pixel-wisely separate the micromanipulator from the low-contrast background and precisely locate the tip with error around 1 pixel (2 µ m at 4  ×  magnification). As a result, the cell-laden microtube is automatically assembled at six layers/min, which is effective enough to fabricate vessel-mimetic constructs for vascularization in tissue engineering. (paper)

Piercing the water surface with a blade: Singularities of the contact line

Energy Technology Data Exchange (ETDEWEB)

Alimov, Mars M. [Kazan Federal University, Kazan 420008 (Russian Federation); Kornev, Konstantin G. [Department of Materials Science & Engineering, Clemson University, Clemson, South Carolina 29634 (United States)

2016-01-15

An external meniscus on a narrow blade with a slit-like cross section is studied using the hodograph formulation of the Laplace nonlinear equation of capillarity. On narrow blades, the menisci are mostly shaped by the wetting and capillary forces; gravity plays a secondary role. To describe a meniscus in this asymptotic case, the model of Alimov and Kornev [“Meniscus on a shaped fibre: Singularities and hodograph formulation,” Proc. R. Soc. A 470, 20140113 (2014)] has been employed. It is shown that at the sharp edges of the blade, the contact line makes a jump. In the wetting case, the contact line sitting at each side of the blade is lifted above the points where the meniscus first meets the blade edges. In the non-wetting case, the contact line is lowered below these points. The contours of the constant height emanating from the blade edges generate unusual singularities with infinite curvatures at some points at the blade edges. The meniscus forms a unique surface made of two mirror-symmetric sheets fused together. Each sheet is supported by the contact line sitting at each side of the blade.

Piercing the water surface with a blade: Singularities of the contact line

International Nuclear Information System (INIS)

Alimov, Mars M.; Kornev, Konstantin G.

2016-01-01

An external meniscus on a narrow blade with a slit-like cross section is studied using the hodograph formulation of the Laplace nonlinear equation of capillarity. On narrow blades, the menisci are mostly shaped by the wetting and capillary forces; gravity plays a secondary role. To describe a meniscus in this asymptotic case, the model of Alimov and Kornev [“Meniscus on a shaped fibre: Singularities and hodograph formulation,” Proc. R. Soc. A 470, 20140113 (2014)] has been employed. It is shown that at the sharp edges of the blade, the contact line makes a jump. In the wetting case, the contact line sitting at each side of the blade is lifted above the points where the meniscus first meets the blade edges. In the non-wetting case, the contact line is lowered below these points. The contours of the constant height emanating from the blade edges generate unusual singularities with infinite curvatures at some points at the blade edges. The meniscus forms a unique surface made of two mirror-symmetric sheets fused together. Each sheet is supported by the contact line sitting at each side of the blade

The role of titanium aluminide in n-gallium nitride ohmic contact technology

Science.gov (United States)

Pelto, Christopher M.

Ohmic contacts are essential to the realization of efficient and affordable nitride-based electronic and optoelectronic devices. Currently, the most successful ohmic contact schemes to n-GaN are based on the Al/Ti bilayer structure, although the mechanism responsible for the low resistance in these contacts is not sufficiently understood. In this work, the intermetallic TiAl3 has been employed both as a model ohmic contact system to help understand the essential features of the Al/Ti standard contact, as well as a thermally stable oxidation cap for the bilayer structure. A quaternary isotherm of the Al-Ti-Ga-N system was calculated at 600°C, which showed that a sufficient phase topology was present to apply the exchange mechanism to the TiAl 3/GaN couple. The exchange mechanism rationalized the selection of the TiAl3 intermetallic by predicting that an Al-rich AlGaN layer will form at the metal/semiconductor interface. As part of the investigation of these novel contact systems, a thorough characterization was undertaken on both a standard Al/Ti and Au/Ni/Al/Ti contact to n-GaN in which the essential processing parameters and metallurgical properties were identified. The TiAl 3 contact was found to exhibit inferior electrical behavior compared to the Al/Ti bilayer, requiring significantly higher annealing temperatures to achieve comparable specific contact resistance. It is conjectured that this is due to the early formation of a TiN layer at the metal/semiconductor interface of the bilayer contact, even though both contacts are suspected to form the Al-rich nitride layer at higher temperature. As an oxidation cap, the TiAl3 metallization was found to provide much improved performance characteristics compared to the four-layer Au/Al/Ni/Ti standard. The TiAl 3/Al/Ti contact proved to achieve optimal performance at a much lower temperature than the standard, and furthermore showed complete insensitivity to the oxidation content of the annealing ambient. Reaction

Current knowledge on biomarkers for contact sensitization and allergic contact dermatitis

NARCIS (Netherlands)

Koppes, Sjors A.; Engebretsen, Kristiane A.; Agner, Tove; Angelova-Fischer, Irena; Berents, Teresa; Brandner, Johanna; Brans, Richard; Clausen, Maja-Lisa; Hummler, Edith; Jakasa, Ivone; Jurakić-Tončic, Ružica; John, Swen M.; Khnykin, Denis; Molin, Sonja; Holm, Jan O.; Suomela, Sari; Thierse, Hermann-Josef; Kezic, Sanja; Martin, Stefan F.; Thyssen, Jacob P.

2017-01-01

Contact sensitization is common and affects up to 20% of the general population. The clinical manifestation of contact sensitization is allergic contact dermatitis. This is a clinical expression that is sometimes difficult to distinguish from other types of dermatitis, for example irritant and

Treatment needs for greater-than-Class C low-level wastes

International Nuclear Information System (INIS)

Ross, W.A.; Brouns, R.A.; Burkholder, H.C.

1988-01-01

Greater-than-Class C (GTCC) radioactive wastes are those low-level wastes that exceed the 10CFR61 limits for shallow-land burial but are not within the historical definition of high-level wastes (i.e., spent fuel and first-cycle reprocessing wastes). The GTCC category can include all transuranic (TRU) wastes, although for the purposes of this paper, contact-handled defense TRU wastes are excluded because of the major efforts in the past decade to prepare them for disposal at the Waste Isolation Pilot Plant (WIPP). Thus, the GTCC category includes all high-activity and remote-handled TRU wastes regardless of origin. This paper defines the need for treatment of existing and projected GTCC low-level radioactive wastes in the United States. The sources, characteristics, treatment considerations, and methods for treatment are reviewed

Relationship between the real contact area and contact force in pre-sliding regime

International Nuclear Information System (INIS)

Song Baojiang; Yan Shaoze

2017-01-01

The pre-sliding regime is typically neglected in the dynamic modelling of mechanical systems. However, the change in contact state caused by static friction may decrease positional accuracy and control precision. To investigate the relationship between contact status and contact force in pre-sliding friction, an optical experimental method is presented in this paper. With this method, the real contact state at the interface of a transparent material can be observed based on the total reflection principle of light by using an image processing technique. A novel setup, which includes a pair of rectangular trapezoidal blocks, is proposed to solve the challenging issue of accurately applying different tangential and normal forces to the contact interface. The improved Otsu’s method is used for measurement. Through an experimental study performed on polymethyl methacrylate (PMMA), the quantity of contact asperities is proven to be the dominant factor that affects the real contact area. The relationship between the real contact area and the contact force in the pre-sliding regime is studied, and the distribution of static friction at the contact interface is qualitatively discussed. New phenomena in which the real contact area expands along with increasing static friction are identified. The aforementioned relationship is approximately linear at the contact interface under a constant normal pressure, and the distribution of friction stress decreases from the leading edge to the trailing edge. (paper)

Contact Lens Risks

Science.gov (United States)

... There is a risk of eye infection from bacteria in swimming pool water, hot tubs, lakes and the ocean Replace your contact lens storage case every 3 months or as directed by your eye care professional. Other Risks of Contact Lenses Other risks of contact lenses include pink eye ( ...

Noneczematous Contact Dermatitis

Science.gov (United States)

Foti, Caterina; Vestita, Michelangelo; Angelini, Gianni

2013-01-01

Irritant or allergic contact dermatitis usually presents as an eczematous process, clinically characterized by erythematoedematovesicous lesions with intense itching in the acute phase. Such manifestations become erythematous-scaly as the condition progresses to the subacute phase and papular-hyperkeratotic in the chronic phase. Not infrequently, however, contact dermatitis presents with noneczematous features. The reasons underlying this clinical polymorphism lie in the different noxae and contact modalities, as well as in the individual susceptibility and the various targeted cutaneous structures. The most represented forms of non-eczematous contact dermatitis include the erythema multiforme-like, the purpuric, the lichenoid, and the pigmented kinds. These clinical entities must obviously be discerned from the corresponding “pure” dermatitis, which are not associated with contact with exogenous agents. PMID:24109520

Hydrogen extraction from liquid lithium-lead alloy by gas-liquid contact method

International Nuclear Information System (INIS)

Xie Bo; Weng Kuiping; Hou Jianping; Yang Guangling; Zeng Jun

2013-01-01

Hydrogen extraction experiment from liquid lithium-lead alloy by gas-liquid contact method has been carried out in own liquid lithium-lead bubbler (LLLB). Experimental results show that, He is more suitable than Ar as carrier gas in the filler tower. The higher temperature the tower is, the greater hydrogen content the tower exports. Influence of carrier gas flow rate on the hydrogen content in the export is jagged, no obvious rule. Although the difference between experimental results and literature data, but it is feasible that hydrogen isotopes extraction experiment from liquid lithium-lead by gas-liquid contact method, and the higher extraction efficiency increases with the growth of the residence time of the alloy in tower. (authors)

Hypermetabolism in ALS is associated with greater functional decline and shorter survival.

Science.gov (United States)

Steyn, Frederik J; Ioannides, Zara A; van Eijk, Ruben P A; Heggie, Susan; Thorpe, Kathryn A; Ceslis, Amelia; Heshmat, Saman; Henders, Anjali K; Wray, Naomi R; van den Berg, Leonard H; Henderson, Robert D; McCombe, Pamela A; Ngo, Shyuan T

2018-04-29

To determine the prevalence of hypermetabolism, relative to body composition, in amyotrophic lateral sclerosis (ALS) and its relationship with clinical features of disease and survival. Fifty-eight patients with clinically definite or probable ALS as defined by El Escorial criteria, and 58 age and sex-matched control participants underwent assessment of energy expenditure. Our primary outcome was the prevalence of hypermetabolism in cases and controls. Longitudinal changes in clinical parameters between hypermetabolic and normometabolic patients with ALS were determined for up to 12 months following metabolic assessment. Survival was monitored over a 30-month period following metabolic assessment. Hypermetabolism was more prevalent in patients with ALS than controls (41% vs 12%, adjusted OR=5.4; pALS. Mean lower motor neuron score (SD) was greater in hypermetabolic patients when compared with normometabolic patients (4 (0.3) vs 3 (0.7); p=0.04). In the 12 months following metabolic assessment, there was a greater change in Revised ALS Functional Rating Scale score in hypermetabolic patients when compared with normometabolic patients (-0.68 points/month vs -0.39 points/month; p=0.01). Hypermetabolism was inversely associated with survival. Overall, hypermetabolism increased the risk of death during follow-up to 220% (HR 3.2, 95% CI 1.1 to 9.4, p=0.03). Hypermetabolic patients with ALS have a greater level of lower motor neuron involvement, faster rate of functional decline and shorter survival. The metabolic index could be important for informing prognosis in ALS. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Apparent Contact Angle and Contact Angle Hysteresis on Liquid Infused Surfaces

OpenAIRE

Semprebon, Ciro; McHale, Glen; Kusumaatmaja, Halim

2016-01-01

We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a strong dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small b...

Gender, Poverty and Employment in India

OpenAIRE

V. Gayathri

2005-01-01

Development theories recognise that employment is central to the alleviation of poverty and the enhancement of well-being. This means that at the practical level, it is understood that labour-intensive growth and greater labour-force participation by women are necessary elements for poverty reduction. At the level of discursive practice, the gender and poverty debates treat labour as an abstract category. In recognition of this lacuna, this paper attempts to address two principal questions: a...

Renormalization of NN scattering: Contact potential

International Nuclear Information System (INIS)

Yang Jifeng; Huang Jianhua

2005-01-01

The renormalization of the T matrix for NN scattering with a contact potential is re-examined in a nonperturbative regime through rigorous nonperturbative solutions. Based on the underlying theory, it is shown that the ultraviolet divergences in the nonperturbative solutions of the T matrix should be subtracted through 'endogenous' counterterms, which in turn leads to a nontrivial prescription dependence. Moreover, employing the effective range expansion, the importance of imposing physical boundary conditions to remove the nontrivial prescription dependence, especially before making any physical claims, is discussed and highlighted. As by-products, some relations between the effective range expansion parameters are derived. We also discuss the power counting of the couplings for the nucleon-nucleon interactions and other subtle points related to the EFT framework beyond perturbative treatment

Adhesion of Stenotrophomonas maltophilia, Delftia acidovorans, and Achromobacter xylosoxidans to Contact Lenses.

Science.gov (United States)

Vijay, Ajay Kumar; Willcox, Mark D P

2017-09-26

Contact lens cases become contaminated with microbes during use. We wished to compare the adhesion of uncommon bacterial contaminants isolated from lens cases to contact lenses with and without organic soil. Strains of Delftia acidovorans (001), Stenotrophomonas maltophilia (002 and 006), and Achromobacter xylosoxidans (001) isolated from contact lens cases (test strains) and Pseudomonas aeruginosa (Paer1) isolated from eyes at the time of infiltrative response (control strain) were used. Bacteria were grown and resuspended in phosphate-buffered saline (PBS) or 10% organic soil (heat-killed Saccharomyces cerevisiae resuspended in complement inactivated bovine serum). Two silicone hydrogel (senofilcon A and comfilcon A) and one hydrogel lens (etafilcon A) lens materials were used. Bacteria (1.0×10 and 1.0×10 colony-forming units/mL; CFU/mL) adhered to lenses for 24 hr and the numbers of bacteria adherent to each lens type (with and without organic soil) were estimated by culture. All the four test strains adhered in significantly greater numbers to contact lenses after incubation in inoculum prepared with organic soil compared with PBS-D. acidovorans 001 (0.7 log10 CFU; P0.05). Achromobacter xylosoxidans 001 (PBacteria that are commonly found in contact lens cases adhered to contact lenses in relatively high numbers in the presence of organic soil. This might indicate that a similar phenomenon occurs in the presence of tears. This may facilitate their transfer from the lens to the cornea and the production of corneal infiltrates.

High efficiency organic photovoltaic cells employing hybridized mixed-planar heterojunctions

Science.gov (United States)

Xue, Jiangeng; Uchida, Soichi; Rand, Barry P; Forrest, Stephen

2013-11-19

A device is provided, having a first electrode, a second electrode, and a photoactive region disposed between the first electrode and the second electrode. The photoactive region includes a first organic layer comprising a mixture of an organic acceptor material and an organic donor material, wherein the first organic layer has a thickness not greater than 0.8 characteristic charge transport lengths, and a second organic layer in direct contact with the first organic layer, wherein: the second organic layer comprises an unmixed layer of the organic acceptor material or the organic donor material of the first organic layer, and the second organic layer has a thickness not less than about 0.1 optical absorption lengths. Preferably, the first organic layer has a thickness not greater than 0.3 characteristic charge transport lengths. Preferably, the second organic layer has a thickness of not less than about 0.2 optical absorption lengths. Embodiments of the invention can be capable of power efficiencies of 2% or greater, and preferably 5% or greater.

Measurement of Capillary Radius and Contact Angle within Porous Media.

Science.gov (United States)

Ravi, Saitej; Dharmarajan, Ramanathan; Moghaddam, Saeed

2015-12-01

The pore radius (i.e., capillary radius) and contact angle determine the capillary pressure generated in a porous medium. The most common method to determine these two parameters is through measurement of the capillary pressure generated by a reference liquid (i.e., a liquid with near-zero contact angle) and a test liquid. The rate of rise technique, commonly used to determine the capillary pressure, results in significant uncertainties. In this study, we utilize a recently developed technique for independently measuring the capillary pressure and permeability to determine the equivalent minimum capillary radii and contact angle of water within micropillar wick structures. In this method, the experimentally measured dryout threshold of a wick structure at different wicking lengths is fit to Darcy's law to extract the maximum capillary pressure generated by the test liquid. The equivalent minimum capillary radii of different wick geometries are determined by measuring the maximum capillary pressures generated using n-hexane as the working fluid. It is found that the equivalent minimum capillary radius is dependent on the diameter of pillars and the spacing between pillars. The equivalent capillary radii of micropillar wicks determined using the new method are found to be up to 7 times greater than the current geometry-based first-order estimates. The contact angle subtended by water at the walls of the micropillars is determined by measuring the capillary pressure generated by water within the arrays and the measured capillary radii for the different geometries. This mean contact angle of water is determined to be 54.7°.

Work Overload and Turnover Intention of Junior Auditors in Greater Jakarta, Indonesia

Directory of Open Access Journals (Sweden)

Andika Pradana

2015-11-01

Full Text Available This paper aims to analyze how work overload influences turnover intentions of newly hired junior auditors in public accounting offices. Job satisfaction, work related stress and work life conflicts are used as mediating variables between work overload and turnover intention. This study employed 141 auditors from several accounting firms operating in the Greater Jakarta region. The sample was selected using purposive sampling. Three mediation hypotheses were tested using Structural Equation Modeling (SEM. The results show that work overload has a significant effect on increasing turnover intention through both job satisfaction and work related stress. In comparison, work overload does not influence turnover intention through work life balance. This may be due to the nature of the respondents, in which a majority of the newly hired accountants employed in this study are unmarried.

Supporting the Transition into Employment: A Study of Canadian Young Adults Living with Disabilities.

Science.gov (United States)

Jetha, Arif; Bowring, Julie; Furrie, Adele; Smith, Frank; Breslin, Curtis

2018-04-25

Objective To examine the job accommodation and benefit needs of young adults with disabilities as they transition into employment, and their perceived barriers to meeting support needs. Methods An online survey was conducted of 155 Canadian young adults with disabilities (mean age = 25.8 years). Respondents were either employed or seeking employment, and were asked about their need for health benefits, and soft (e.g., flexible scheduling) and hard accommodations (e.g., ergonomic interventions), and perceived accommodation barriers. Disability characteristics (e.g., disability type), demographic details and work context information were collected. Multivariable logistic analyses were conducted to examine the factors associated with a greater need for health benefits and hard and soft accommodations. Result Participants reported having a physical (79%), psychological (79%) or cognitive/learning disability (77%); 68% had > 1 disability. Over half (55%) were employed. Health benefits and soft accommodations were most needed by participants. Also, an average of six perceived accommodation barriers were indicated; difficulty with disability disclosure was most frequently reported. More perceived accommodation barriers were associated with a greater need for health benefits (OR 1.17, 95% CI 1.04-1.31) and soft accommodations (OR 1.13, 95% CI 1.01-1.27). A psychological disability was a associated with a greater need for health benefits (OR 2.91, 95% CI 1.09-7.43) and soft accommodations (OR 3.83, 95% CI 1.41-10.42). Discussion Employers can support the employment of young adults with disabilities through provision of extended health benefits and soft accommodations. Addressing accommodation barriers could minimize unmet workplace need, and improve employment outcomes for young adults with disabilities as they begin their career and across the life course.

Calculation of locomotive traction force in transient rolling contact

Directory of Open Access Journals (Sweden)

Voltr P.

2017-06-01

Full Text Available To represent thewheel-rail contact in numerical simulations of rail vehicles, simplified models (Fastsim, Pola´ch etc. are usually employed. These models are designed for steady rolling only, which is perfectly suitable in many cases. However, it is shown to be limiting for simulations at very low vehicle speeds, and therefore it does not actually allow simulation of vehicle running at arbitrarily variable speed. The simplified model of transient rolling, which involves calculation of the stress distribution in the discretised contact area, overcomes this disadvantage but might be unnecessarily complex for more simple simulations. In this paper, an approximative creep force computation method for transient rolling is presented. Its purpose is not to study the transient phenomena themselves but provide a simple and readily available way to prevent incorrect results of the numerical simulation when the vehicle speed approaches zero. The proper function of the proposed method is demonstrated by a simulation of start-up and interrupted sliding of a four-axle locomotive.

Family employment and child socioemotional behaviour: longitudinal findings from the UK Millennium Cohort Study.

Science.gov (United States)

Hope, Steven; Pearce, Anna; Whitehead, Margaret; Law, Catherine

2014-10-01

Levels of paid employment in two parent and lone parent families have increased in the UK but evidence of its impact on child socioemotional behaviour is limited and inconsistent. We conducted a longitudinal analysis using the first four sweeps of the Millennium Cohort Study (9 months, 3 years, 5 years and 7 years) to investigate the influence of family employment trajectories in the early years on socioemotional behaviour at 7 years, unadjusted and adjusted for covariates. In addition, mothers' employment was investigated separately. Children from families where no parent was employed for one or more sweeps were at a greater risk of socioemotional problem behaviour compared with those where a parent was continuously employed, even after adjustment for covariates. Children of mothers who were non-employed for one or more sweeps were at greater risk of problem behaviour compared with mothers who were employed at all sweeps. Adjustment for covariates fully attenuated the excess risk for children whose mothers had moved into employment by the time they were 7 years. In contrast, the elevated risk associated with continuous non-employment and a single transition out of employment was attenuated after adjustment for early covariates, fathers' employment, household income and mothers' psychological distress at 7 years, but remained significant. Family and mothers' employment were associated with a lower risk of problem behaviour for children in middle childhood, in part explained by sociodemographic characteristics of families and the apparent psychological and socioeconomic benefits of employment. Results for mothers' transitions in or out of the labour market suggest that child problem behaviour is influenced by current status, over and above diverse earlier experiences of employment and non-employment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Family employment and child socioemotional behaviour: longitudinal findings from the UK Millennium Cohort Study

Science.gov (United States)

Hope, Steven; Pearce, Anna; Whitehead, Margaret; Law, Catherine

2014-01-01

Background Levels of paid employment in two parent and lone parent families have increased in the UK but evidence of its impact on child socioemotional behaviour is limited and inconsistent. Methods We conducted a longitudinal analysis using the first four sweeps of the Millennium Cohort Study (9 months, 3 years, 5 years and 7 years) to investigate the influence of family employment trajectories in the early years on socioemotional behaviour at 7 years, unadjusted and adjusted for covariates. In addition, mothers’ employment was investigated separately. Results Children from families where no parent was employed for one or more sweeps were at a greater risk of socioemotional problem behaviour compared with those where a parent was continuously employed, even after adjustment for covariates. Children of mothers who were non-employed for one or more sweeps were at greater risk of problem behaviour compared with mothers who were employed at all sweeps. Adjustment for covariates fully attenuated the excess risk for children whose mothers had moved into employment by the time they were 7 years. In contrast, the elevated risk associated with continuous non-employment and a single transition out of employment was attenuated after adjustment for early covariates, fathers’ employment, household income and mothers’ psychological distress at 7 years, but remained significant. Conclusions Family and mothers’ employment were associated with a lower risk of problem behaviour for children in middle childhood, in part explained by sociodemographic characteristics of families and the apparent psychological and socioeconomic benefits of employment. Results for mothers’ transitions in or out of the labour market suggest that child problem behaviour is influenced by current status, over and above diverse earlier experiences of employment and non-employment. PMID:24889054

Psychological foundations of xenophilia: the role of major personality traits in predicting favorable attitudes toward cross-cultural contact and exploration.

Science.gov (United States)

Stürmer, Stefan; Benbow, Alison E F; Siem, Birte; Barth, Markus; Bodansky, Alexander N; Lotz-Schmitt, Katharina

2013-11-01

Building on an integration of research findings on intergroup behavior from multiple fields of scientific inquiry (biological and cultural paleoanthropology, social psychology), as well as research on the HEXACO personality framework (e.g., Ashton & Lee, 2007), 3 independent studies (total N = 1,007) were conducted to introduce and test a fresh personality perspective on human xenophilia. Even though the studies focused on different criteria (Study 1: favorable attitudes toward contact with immigrants, Study 2: habitual cross-cultural exploration, Study 3: favorable attitudes toward contact with indigenous people) and employed different operationalizations of major personality traits (the HEXACO Personality Inventory-Revised [HEXACO-PI-R], the 10-item Big Five Inventory [BFI-10]) results were remarkably similar. First, path analyses confirmed that major personality traits were significant and direct predictors of xenophilia that were independent of the contributions of individual differences commonly predicting xenophobic reactions across studies. Second, and in line with the authors' more specific hypotheses, hierarchical regression analyses also corroborated that individual differences in the levels of endeavor-related personality traits (i.e., eXtraversion, Openness, and Conscientiousness) had a substantially greater power in predicting individual differences in xenophilia than individual differences in levels of altruism/cooperation-related traits (i.e., Honesty-Humility, Emotionality, and Agreeableness). The implications of these findings for more general psychological theorizing on human sociality are discussed. PsycINFO Database Record (c) 2013 APA, all rights reserved

Analytical Expressions of the Efficiency of Standard and High Contact Ratio Involute Spur Gears

Directory of Open Access Journals (Sweden)

Miguel Pleguezuelos

2013-01-01

Full Text Available Simple, traditional methods for computation of the efficiency of spur gears are based on the hypotheses of constant friction coefficient and uniform load sharing along the path of contact. However, none of them is accurate. The friction coefficient is variable along the path of contact, though average values can be often considered for preliminary calculations. Nevertheless, the nonuniform load sharing produced by the changing rigidity of the pair of teeth has significant influence on the friction losses, due to the different relative sliding at any contact point. In previous works, the authors obtained a nonuniform model of load distribution based on the minimum elastic potential criterion, which was applied to compute the efficiency of standard gears. In this work, this model of load sharing is applied to study the efficiency of both standard and high contact ratio involute spur gears (with contact ratio between 1 and 2 and greater than 2, resp.. Approximate expressions for the friction power losses and for the efficiency are presented assuming the friction coefficient to be constant along the path of contact. A study of the influence of some transmission parameters (as the gear ratio, pressure angle, etc. on the efficiency is also presented.

Adoptees' contact with birth parents in emerging adulthood: the role of adoption communication and attachment to adoptive parents.

Science.gov (United States)

Farr, Rachel H; Grant-Marsney, Holly A; Grotevant, Harold D

2014-12-01

As adoptees transition to adulthood, their roles in the family may shift, providing them with opportunities to have increasing autonomy in their decisions about contact and initiating conversations about adoption. Research has often focused more on adoptees as children, yet in emerging adulthood, there are important shifts in the life roles and relationships of adoptees during which adoptive parents continue to be meaningful. This study examined associations among attachment and communication within the adoptive family during adulthood with emerging adult adoptees' experience of birth family contact (frequency of and satisfaction with birth family contact), in a sample of 167 emerging adults with varied contact with birth family (from no contact to frequent contact). Results suggest that perceptions of secure parent-child attachment relationships, as well as sensitive and open communication with adoptive parents about adoption, continue to be important for emerging adult adoptees and lead to greater satisfaction for adoptees with birth parent contact-regardless of whether adoptees actually have birth family contact. In particular, positive family communication about adoption during adulthood was predictive of satisfaction with birth parent contact. Limitations and implications are discussed. © 2014 Family Process Institute.

Contact with turf algae alters the coral microbiome: contact versus systemic impacts

Science.gov (United States)

Pratte, Zoe A.; Longo, Guilherme O.; Burns, Andrew S.; Hay, Mark E.; Stewart, Frank J.

2018-03-01

Coral reefs are degrading to algae-dominated reefs worldwide, with alterations of coral microbiomes commonly co-occurring with reef demise. The severe thermal anomaly during the 2016 El Niño event in the South Pacific killed many corals and stressed others. We examined the microbiome of turf algae and of the coral Porites sp. in contact with turf during this thermal event to investigate algal turf effects on the coral microbiome during a period of environmental stress. The microbial composition of turf did not differ between coral-contacted and non-contacted turfs. However, microbiomes of corals in direct contact with turf were similar to those of the turf microbiome, but differed significantly from coral portions 5 cm from the point of turf/coral contact and from portions of the coral that looked most healthy, regardless of location. Although the majority of significant differences occurred in coral samples at the point of contact, a small subset of microbial taxa was enriched in coral tissues taken 5 cm from turf contact compared to all other sample types, including samples from areas of the coral that appeared most healthy. These results suggest that the coral microbiome is susceptible to colonization by microbes from turf, but not vice versa. Results also suggest that algal contact elicits a subtle shift in the coral microbiome just beyond the contact site. The combination of turf microbiome stability and coral microbiome vulnerability at areas of contact may contribute to the continued decline in coral cover and increase in algal cover associated with coral-algae phase shifts.

Intergroup Contact and Peacebuilding: Promoting Youth Civic Engagement in Northern Ireland

Directory of Open Access Journals (Sweden)

Shelley McKeown

2017-10-01

Full Text Available Focusing on the post-accord generation in Northern Ireland, this study aimed to examine the role of intergroup contact in promoting support for peacebuilding and youth civic engagement. The sample comprised 466 youth (aged 14-15; 51% Catholic, 49% Protestant who were born after the 1998 Good Friday/Belfast Agreement and therefore represent a ‘post-accord’ generation. Recruited through their schools, youth completed scales on intergroup contact (quality and quantity, support for peacebuilding, and civic engagement. Hypotheses were tested using structural equation modelling and bootstrapped mediation in MPlus. Results found that support for peacebuilding partially mediated the association between higher quality and higher quantity contact and greater civic engagement (volunteering and political participation. Findings demonstrate that youth who are living with the legacy of protracted intergroup conflict can support peacebuilding and engage in constructive behaviours such as civic engagement. By recognising the peacebuilding potential of youth, especially in a post-accord generation, the findings may inform how to promote youth civic engagement and social reconstruction after conflict.

Patients with multiple contact allergies

DEFF Research Database (Denmark)

Carlsen, Berit Christina; Andersen, Klaus Ejner; Menné, Torkil

2008-01-01

Patients with multiple contact allergies, also referred to as polysensitized, are more frequent than predicted from prevalence of single sensitivities. The understanding of why some people develop multiple contact allergies, and characterization of patients with multiple contact allergies...... of developing multiple contact allergies. Evidence of allergen clusters among polysensitized individuals is also reviewed. The literature supports the idea that patients with multiple contact allergies constitute a special entity within the field of contact allergy. There is no generally accepted definition...... of patients with multiple contact allergies. We suggest that contact allergy to 3 or more allergens are defined as multiple contact allergies....

Taino and African maternal heritage in the Greater Antilles.

Science.gov (United States)

Bukhari, Areej; Luis, Javier Rodriguez; Alfonso-Sanchez, Miguel A; Garcia-Bertrand, Ralph; Herrera, Rene J

2017-12-30

Notwithstanding the general interest and the geopolitical importance of the island countries in the Greater Antilles, little is known about the specific ancestral Native American and African populations that settled them. In an effort to alleviate this lacuna of information on the genetic constituents of the Greater Antilles, we comprehensively compared the mtDNA compositions of Cuba, Dominican Republic, Haiti, Jamaica and Puerto Rico. To accomplish this, the mtDNA HVRI and HVRII regions, as well as coding diagnostic sites, were assessed in the Haitian general population and compared to data from reference populations. The Taino maternal DNA is prominent in the ex-Spanish colonies (61.3%-22.0%) while it is basically non-existent in the ex-French and ex-English colonies of Haiti (0.0%) and Jamaica (0.5%), respectively. The most abundant Native American mtDNA haplogroups in the Greater Antilles are A2, B2 and C1. The African mtDNA component is almost fixed in Haiti (98.2%) and Jamaica (98.5%), and the frequencies of specific African haplogroups vary considerably among the five island nations. The strong persistence of Taino mtDNA in the ex-Spanish colonies (and especially in Puerto Rico), and its absence in the French and English excolonies is likely the result of different social norms regarding mixed marriages with Taino women during the early years after the first contact with Europeans. In addition, this article reports on the results of an integrative approach based on mtDNA analysis and demographic data that tests the hypothesis of a southward shift in raiding zones along the African west coast during the period encompassing the Transatlantic Slave Trade. Copyright © 2017 Elsevier B.V. All rights reserved.

A Simple Approach for Local Contact Angle Determination on a Heterogeneous Surface

KAUST Repository

Wu, Jinbo

2011-05-17

We report a simple approach for measuring the local contact angle of liquids on a heterogeneous surface consisting of intersected hydrophobic and hydrophilic patch arrays, specifically by employing confocal microscopy and the addition of a very low concentration of Rhodamine-B (RB) (2 × 10 -7 mol/L). Interestingly, RB at that concentration was found to be aggregated at the air-liquid and solid (hydrophobic patch only)-liquid interfaces, which helps us to distinguish the liquid and solid interfaces as well as hydrophobic and hydrophilic patches by their corresponding fluorescent intensities. From the measured local contact angles, the line tension can be easily derived and the value is found to be (-2.06-1.53) × 10-6 J/m. © 2011 American Chemical Society.

Employment and work-related issues in cancer survivors.

Science.gov (United States)

Mehnert, Anja

2011-02-01

Purpose of this systematic literature review was to identify current knowledge about employment in cancer survivors. Sixty-four studies met inclusion criteria that were original papers published between 01/2000 and 11/2009. Overall, 63.5% of cancer survivors (range 24-94%) returned to work. The mean duration of absence from work was 151 days. Factors significantly associated with a greater likelihood of being employed or return to work were perceived employer accommodation, flexible working arrangements, counseling, training and rehabilitation services, younger age and cancer sites of younger individuals, higher levels of education, male gender, less physical symptoms, lower length of sick leave and continuity of care. Cancer survivors had a significantly increased risk for unemployment, early retirement and were less likely to be re-employed. Between 26% and 53% of cancer survivors lost their job or quit working over a 72-month period post diagnosis. Between 23% and 75% of patients who lost their job were re-employed. A high proportion of patients experienced at least temporary changes in work schedules, work hours, wages and a decline in work ability compared to non-cancer groups. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Muzzle voltage and contact potential in plasma armature railguns

International Nuclear Information System (INIS)

Keefer, D.

1988-01-01

The voltages measured at the muzzle of a railgun have values greater than those calculated from the one-dimensional models for railgun plasma armatures. This excess voltage is attributed to the contact potential and has a value of several tens of volts. The use of experimentally measured muzzle voltage to determine plasma properties has required that this contact potential be subtracted in order to obtain meaningful results. A two-dimensional model of the plasma armature has been analyzed which shows that a portion of this excess voltage arises as a result of the reduced conductivity in the thermal boundary layer of the rail. Another portion arises from the speed voltage and is confined to a region near the rails within the velocity boundary layer thickness. The voltage drop in the boundary layer is not constant along the length of the armature, and the implications of this effect of the boundary conditions for one- and two-dimensional models of the railgun plasma armature are discussed

Experimental and numerical investigation of contact-area-limited doping for top-contact pentacene thin-film transistors with Schottky contact.

Science.gov (United States)

Noda, Kei; Wada, Yasuo; Toyabe, Toru

2015-10-28

Effects of contact-area-limited doping for pentacene thin-film transistors with a bottom-gate, top-contact configuration were investigated. The increase in the drain current and the effective field-effect mobility was achieved by preparing hole-doped layers underneath the gold contact electrodes by coevaporation of pentacene and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), confirmed by using a thin-film organic transistor advanced simulator (TOTAS) incorporating Schottky contact with a thermionic field emission (TFE) model. Although the simulated electrical characteristics fit the experimental results well only in the linear regime of the transistor operation, the barrier height for hole injection and the gate-voltage-dependent hole mobility in the pentacene transistors were evaluated with the aid of the device simulation. This experimental data analysis with the simulation indicates that the highly-doped semiconducting layers prepared in the contact regions can enhance the charge carrier injection into the active semiconductor layer and concurrent trap filling in the transistor channel, caused by the mitigation of a Schottky energy barrier. This study suggests that both the contact-area-limited doping and the device simulation dealing with Schottky contact are indispensable in designing and developing high-performance organic thin-film transistors.

Comparison Between Bandage Contact Lenses and Pressure Patching on the Erosion Area and Pain Scale in Patients With Corneal Erosion.

Science.gov (United States)

Triharpini, Ni Nyoman; Gede Jayanegara, I Wayan; Handayani, Ariesanti Tri; Widiana, I Gde Raka

2015-01-01

Corneal erosion is common in eye emergency cases. Extensive corneal erosions result in severe pain and prolonged healing time. This study aimed to compare bandage contact lenses with pressure patching in terms of reducing the size of the erosion area, pain scale in patients with corneal erosion and its complications. A randomized open-label clinical trial was conducted. Subjects with mechanical corneal erosion were selected to use either bandage contact lenses or pressure patching. All subjects received antibiotic eye drops and 0.5% tropicamide eye drops. Evaluations were done 24 and 72 hours after treatment. The size of the corneal erosion area, pain scale, and complications were assessed. A total of 32 eyes (16 eyes in each group) were studied. The change in the size of the corneal erosion area was greater in the bandage contact lens group than in the pressure patching group, although there was no significant difference. In the bandage contact lens group, 56.25% of the eyes were healed at 24 hours and 43.75% were healed at 72 hours. In the pressure patching group, 62.50% were healed at 24 hours and 12.50% were healed at 72 hours. The change in pain scale was significantly greater in the bandage contact lens group than in the pressure patching group. No complications were found in both groups. Bandage contact lenses are an effective alternative to treating mechanical corneal erosion because of their effect in reducing pain without causing any complications.

Role of Firing Temperature, Sheet Resistance, and Contact Area in Contact Formation on Screen-Printed Metal Contact of Silicon Solar Cell

Science.gov (United States)

Ahmad, Samir Mahmmod; Leong, Cheow Siu; Sopian, K.; Zaidi, Saleem H.

2018-03-01

Formation of an Ohmic contact requires a suitable firing temperature, appropriate doping profile, and contact dimensions within resolution limits of the screen-printing process. In this study, the role of the peak firing temperature in standard rapid thermal annealing (RTA) six-zone conveyor belt furnace (CBF) and two inexpensive alternate RTA systems [a custom-designed, three-zone, 5″-diameter quartz tube furnace (QTF) and a tabletop, 3″-diameter rapid thermal processing (RTP)] has been investigated. In addition, the role of sheet resistance and contact area in achieving low-resistance ohmic contacts has been examined. Electrical measurements of ohmic contacts between silver paste/ n +-emitter layer with varying sheet resistances and aluminum paste/ p-doped wafer were carried out in transmission line method configuration. Experimental measurements of the contact resistivity ( ρ c) exhibited the lowest values for CBF at 0.14 mΩ cm2 for Ag and 100 mΩ cm2 for Al at a peak firing temperature of 870°C. For the QTF configuration, lowest measured contact resistivities were 3.1 mΩ cm2 for Ag and 74.1 mΩ cm2 for Al at a peak firing temperature of 925°C. Finally, for the RTP configuration, lowest measured contact resistivities were 1.2 mΩ cm2 for Ag and 68.5 mΩ cm2 for Al at a peak firing temperature of 780°C. The measured contact resistivity exhibits strong linear dependence on sheet resistance. The contact resistivity for Ag decreases with contact area, while for Al the opposite behavior is observed.

An approximate JKR solution for a general contact, including rough contacts

Science.gov (United States)

Ciavarella, M.

2018-05-01

In the present note, we suggest a simple closed form approximate solution to the adhesive contact problem under the so-called JKR regime. The derivation is based on generalizing the original JKR energetic derivation assuming calculation of the strain energy in adhesiveless contact, and unloading at constant contact area. The underlying assumption is that the contact area distributions are the same as under adhesiveless conditions (for an appropriately increased normal load), so that in general the stress intensity factors will not be exactly equal at all contact edges. The solution is simply that the indentation is δ =δ1 -√{ 2 wA‧ /P″ } where w is surface energy, δ1 is the adhesiveless indentation, A‧ is the first derivative of contact area and P‧‧ the second derivative of the load with respect to δ1. The solution only requires macroscopic quantities, and not very elaborate local distributions, and is exact in many configurations like axisymmetric contacts, but also sinusoidal waves contact and correctly predicts some features of an ideal asperity model used as a test case and not as a real description of a rough contact problem. The solution permits therefore an estimate of the full solution for elastic rough solids with Gaussian multiple scales of roughness, which so far was lacking, using known adhesiveless simple results. The result turns out to depend only on rms amplitude and slopes of the surface, and as in the fractal limit, slopes would grow without limit, tends to the adhesiveless result - although in this limit the JKR model is inappropriate. The solution would also go to adhesiveless result for large rms amplitude of roughness hrms, irrespective of the small scale details, and in agreement with common sense, well known experiments and previous models by the author.

Single-row versus double-row capsulolabral repair: a comparative evaluation of contact pressure and surface area in the capsulolabral complex-glenoid bone interface.

Science.gov (United States)

Kim, Doo-Sup; Yoon, Yeo-Seung; Chung, Hoi-Jeong

2011-07-01

Despite the attention that has been paid to restoration of the capsulolabral complex anatomic insertion onto the glenoid, studies comparing the pressurized contact area and mean interface pressure at the anatomic insertion site between a single-row repair and a double-row labral repair have been uncommon. The purpose of our study was to compare the mean interface pressure and pressurized contact area at the anatomic insertion site of the capsulolabral complex between a single-row repair and a double-row repair technique. Controlled laboratory study. Thirty fresh-frozen cadaveric shoulders (mean age, 61 ± 8 years; range, 48-71 years) were used for this study. Two types of repair were performed on each specimen: (1) a single-row repair and (2) a double-row repair. Using pressure-sensitive films, we examined the interface contact area and contact pressure. The mean interface pressure was greater for the double-row repair technique (0.29 ± 0.04 MPa) when compared with the single-row repair technique (0.21 ± 0.03 MPa) (P = .003). The mean pressurized contact area was also significantly greater for the double-row repair technique (211.8 ± 18.6 mm(2), 78.4% footprint) compared with the single-row repair technique (106.4 ± 16.8 mm(2), 39.4% footprint) (P = .001). The double-row repair has significantly greater mean interface pressure and pressurized contact area at the insertion site of the capsulolabral complex than the single-row repair. The double-row repair may be advantageous compared with the single-row repair in restoring the native footprint area of the capsulolabral complex.

HTSC-Josephson step contacts

International Nuclear Information System (INIS)

Herrmann, K.

1994-03-01

In this work the properties of josephson step contacts are investigated. After a short introduction into Josephson step contacts the structure, properties and the Josphson contacts of YBa 2 Cu 3 O 7-x high-T c superconductors is presented. The fabrication of HTSC step contacts and the microstructure is discussed. The electric properties of these contacts are measured together with the Josephson emission and the magnetic field dependence. The temperature dependence of the stationary transport properties is given. (WL)

Greater happiness for a greater number: Is that possible in Austria?

NARCIS (Netherlands)

R. Veenhoven (Ruut)

2011-01-01

textabstractWhat is the final goal of public policy? Jeremy Bentham (1789) would say: greater happiness for a greater number. He thought of happiness as subjective enjoyment of life; in his words as “the sum of pleasures and pains”. In his time the happiness of the great number could not be measured

Greater happiness for a greater number: Is that possible in Germany?

NARCIS (Netherlands)

R. Veenhoven (Ruut)

2009-01-01

textabstractWhat is the final goal of public policy? Jeremy Bentham (1789) would say: greater happiness for a greater number. He thought of happiness as subjective enjoyment of life; in his words as “the sum of pleasures and pains”. In his time the Happiness of the great number could not be measured

Ocular surface displacement with and without contact lenses during non-contact tonometry.

Science.gov (United States)

Rimayanti, Ulfah; Kiuchi, Yoshiaki; Uemura, Shohei; Takenaka, Joji; Mochizuki, Hideki; Kaneko, Makoto

2014-01-01

To evaluate the displacement of the central ocular surface during non-contact tonometry with and without soft contact lenses and determine the factors associated with the displacement of the central ocular surface and intraocular pressure (IOP) reading changes caused by wearing soft contact lenses (CLs). One eye each in 21 subjects was studied. The cornea was photographed using a high-speed camera at 5,000 frames/sec during non-contact tonometry without contact lenses (NCL), with -5.0 diopters (D), -0.5 D and +5.0 D CL. The displacement of the ocular surface and the factors affecting displacement at the IOP reading and maximum displacement time were investigated. The IOP readings while wearing +5 D CL were significantly higher than those obtained while wearing -5 D CL. The ocular surface displacement between +5 D CL and other groups were significantly different. A significant positive correlation was found between the ocular surface displacement of subjects at the IOP reading time and the IOP obtained with the non-contact tonometer. A significant negative correlation was found between the ocular surface curvature and the IOP obtained using the non-contact tonometer. The radius of curvature of the ocular surface affected the displacement during the IOP reading and maximum displacement time. Our results indicate that soft contact lens use changes the ocular surface behavior and IOP readings during non-contact tonometry. The radius of curvature of the eye affects the ocular surface displacement and IOP readings in this situation.

Tuberculosis: Which patients do not identify their contacts?

Directory of Open Access Journals (Sweden)

J. Josaphat

2014-09-01

Full Text Available Setting: It is not known what the magnitude of non-identified TB contacts is in our country, or the reasons why contacts at risk are not identified. Objective: The purpose of this study was to analyze the determinants associated with non-identification of contacts. Design: This cross-sectional study included all cases of pulmonary tuberculosis diagnosed and treated in the Chest Disease Centre of Vila Nova de Gaia and their contacts, from 1st January to 31st December 2010. It included information collected from patients related to the identification of contacts in risk, and the information collected by the Public Health Unit during home, work and social places visits. Results: During the period of study, 61 cases of pulmonary TB were diagnosed: 41 cases (67.2% identified all their contacts and 20 cases (32.8% did not. 646 contacts were identified: 154 (23.8% were identified only by the Public Health Unit (mean age of 40.67, and 492 (76.2% were identified by the index cases (mean age of 33.25, (p = 0.001. A mean of 10.59 contacts were identified per index case, of which, 83 (19.3% screened positive. From those identified by the Public Health Unit, 10 (9.8% had LTBI and 5 (4.9% had active TB, and by the index case 61 (18.6% had LTBI and 7 (2.1% had active TB (crude OR = 1.52; CI = 0.83–2.79. The multivariate analysis showed that employment (adjusted OR = 4.82; 95%CI = 1.71–13.54 was associated to non-identification of contacts and patients preferably tended to identify relatives and co-habitants (adjusted OR = 0.22; 95%CI = 0.10–0.47. Conclusion: TB patients tend to identify relatives and co-habitant contacts; contact at place of employment was found to be an independent risk factor for not being identified. Resumo: Contexto: Não é conhecida a magnitude dos contactos de TB não identificados no nosso país, nem os motivos porque os contactos em risco não são identificados

Why Third World urban employers usually prefer men.

Science.gov (United States)

Anker, R; Hein, C

1985-01-01

Males outnumber female employees by 3 to 1 in the modern sector of developing countries; moreover, women tend to be concentrated in a limited number of occupations. This underrepresentation of women in employment in Third World countries is generally attributed to the restricted supply of qualified women willing and able to work away from home in modern sector occupations. However, this approach pays insufficient attention to the demand for labor and the recruitment policy of employers. Employer concerns and perceptions that limit the overall demand for women workers and thereby reduce their employment opportunities include the need for pregnancy and maternity leave and protection, absenteeism, turnover, and cultural restrictions. Among the factors that contribute to the sexual segmentation of the labor market are protective legislation that excludes women from certain sectors of the labor market, sex-typing of jobs, and employer perceptions that women lack muscular strength, are not effective supervisors, and cannot work well with men. At the same time, women are preferred for certain jobs because of their greater docility, acceptance of lower wages, household-type skills, and sex appeal. The general factor limiting employment opportunities for women is the employer's perception that women are more costly and less productive than male employees. This perception is directly related to women's role in childbearing and rearing, and is reinforced by legislation that places the costs of maternity leave, nursing breaks, and child care directly on the employer. Thus, women's childbearing and family responsibilities not only limit their availability for work but also discourage employers from hiring them.

Improved protein structure reconstruction using secondary structures, contacts at higher distance thresholds, and non-contacts.

Science.gov (United States)

Adhikari, Badri; Cheng, Jianlin

2017-08-29

Residue-residue contacts are key features for accurate de novo protein structure prediction. For the optimal utilization of these predicted contacts in folding proteins accurately, it is important to study the challenges of reconstructing protein structures using true contacts. Because contact-guided protein modeling approach is valuable for predicting the folds of proteins that do not have structural templates, it is necessary for reconstruction studies to focus on hard-to-predict protein structures. Using a data set consisting of 496 structural domains released in recent CASP experiments and a dataset of 150 representative protein structures, in this work, we discuss three techniques to improve the reconstruction accuracy using true contacts - adding secondary structures, increasing contact distance thresholds, and adding non-contacts. We find that reconstruction using secondary structures and contacts can deliver accuracy higher than using full contact maps. Similarly, we demonstrate that non-contacts can improve reconstruction accuracy not only when the used non-contacts are true but also when they are predicted. On the dataset consisting of 150 proteins, we find that by simply using low ranked predicted contacts as non-contacts and adding them as additional restraints, can increase the reconstruction accuracy by 5% when the reconstructed models are evaluated using TM-score. Our findings suggest that secondary structures are invaluable companions of contacts for accurate reconstruction. Confirming some earlier findings, we also find that larger distance thresholds are useful for folding many protein structures which cannot be folded using the standard definition of contacts. Our findings also suggest that for more accurate reconstruction using predicted contacts it is useful to predict contacts at higher distance thresholds (beyond 8 Å) and predict non-contacts.

Change in employment status of 5-year cancer survivors.

Science.gov (United States)

Torp, Steffen; Nielsen, Roy A; Fosså, Sophie D; Gudbergsson, Saevar B; Dahl, Alv A

2013-02-01

To follow the employment status of 5-year cancer survivors for 5 years after diagnosis with their first lifetime invasive cancer and to identify socio-demographic, work-related and cancer-related predictors of employment status after 5 years. This prospective registry study concerned all 3278 people in Norway (18-61 years old) diagnosed with their first lifetime invasive cancer in 1999 and alive in 2004 and a cancer-free control group (n = 6368) matched by sex, age, educational level and employment status in 1998. The employment rate among male cancer survivors declined steadily every year, from 94% the year before diagnosis (1998) to 77% 5 years after diagnosis (2004). This change did not differ significantly from that of male controls. The employment rate of female survivors also declined steadily, from 87% (1998) to 69% (2004). This decline was greater than that among female controls, and in 2004 survivors had a significantly lower employment rate. For both men and women, the significant pre-diagnosis predictors of being employed in 2004 concerned higher socio-economic position. For both sexes, lung cancer survivors had the highest decline in employment rate, and male skin cancer survivors had a lower decline in employment rate than controls. Socio-demographic and work-related factors explained more of the variance in employment status than did cancer diagnosis. The employment rate among 5-year cancer survivors did not change significantly except for female survivors. Low socio-economic position is a risk factor for decline in employment rate and should be focused on to prevent cancer-related inequity.

Employment status, employment functioning, and barriers to employment among VA primary care patients.

Science.gov (United States)

Zivin, Kara; Yosef, Matheos; Levine, Debra S; Abraham, Kristen M; Miller, Erin M; Henry, Jennifer; Nelson, C Beau; Pfeiffer, Paul N; Sripada, Rebecca K; Harrod, Molly; Valenstein, Marcia

2016-03-15

Prior research found lower employment rates among working-aged patients who use the VA than among non-Veterans or Veterans who do not use the VA, with the lowest reported employment rates among VA patients with mental disorders. This study assessed employment status, employment functioning, and barriers to employment among VA patients treated in primary care settings, and examined how depression and anxiety were associated with these outcomes. The sample included 287 VA patients treated in primary care in a large Midwestern VA Medical Center. Bivariate and multivariable analyses were conducted examining associations between socio-demographic and clinical predictors of six employment domains, including: employment status, job search self-efficacy, work performance, concerns about job loss among employed Veterans, and employment barriers and likelihood of job seeking among not employed Veterans. 54% of respondents were employed, 36% were not employed, and 10% were economically inactive. In adjusted analyses, participants with depression or anxiety (43%) were less likely to be employed, had lower job search self-efficacy, had lower levels of work performance, and reported more employment barriers. Depression and anxiety were not associated with perceived likelihood of job loss among employed or likelihood of job seeking among not employed. Single VA primary care clinic; cross-sectional study. Employment rates are low among working-aged VA primary care patients, particularly those with mental health conditions. Offering primary care interventions to patients that address mental health issues, job search self-efficacy, and work performance may be important in improving health, work, and economic outcomes. Published by Elsevier B.V.

Footprint Contact Area and Interface Pressure Comparison Between the Knotless and Knot-Tying Transosseous-Equivalent Technique for Rotator Cuff Repair.

Science.gov (United States)

Kim, Sung-Jae; Kim, Sung-Hwan; Moon, Hyun-Soo; Chun, Yong-Min

2016-01-01

To quantify and compare the footprint contact area and interface pressure on the greater tuberosity between knotless and knot-tying transosseous-equivalent (TOE) repair using pressure-sensitive film. We used 11 pairs of fresh-frozen cadaveric shoulders (22 specimens), in which rotator cuff tears were created before repair. Each pair was randomized to either conventional medial knot-tying TOE repair (group A) or medial knotless TOE repair using the modified Mason-Allen technique (group B). Pressure-sensitive film was used to quantify the pressurized contact area and interface pressure between the greater tuberosity and supraspinatus tendon. The mean pressurized contact area was 33.2 ± 2.5 mm(2) for group A and 28.4 ± 2.4 mm(2) for group B. There was a significant difference between groups (P = .005). Although the overall contact configuration of both groups was similar and showed an M shape, group A showed a greater pressurized configuration around the medial row. The mean interface pressure was 0.20 ± 0.02 MPa for group A and 0.17 ± 0.02 MPa for group B. There was a significant difference between groups (P = .001). Contrary to our hypothesis, in this time-zero study, medial knotless TOE repair using a modified Mason-Allen suture produced a significantly inferior footprint contact area and interface pressure compared with conventional medial knot-tying TOE repair. Even though we found a statistically significant difference between the 2 repair methods, it is still unknown if this statistical difference seen in our study has any clinical and radiologic significance. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Result of standard patch test in patients suspected of having allergic contact dermatitis.

Science.gov (United States)

Wongpiyabovorn, Jongkonnee; Puvabanditsin, Porntip

2005-09-01

Contact dermatitis is a common skin disease. Disease was diagnosed by a history of contact substance together with geographic distribution of lesion. Up till now, standard patch test is one of the most reliable test to identify and confirm causative agent of allergic contact dermatitis. To determine the rate of positive standard patch test and to identify the common allergen of contact dermatitis in Thailand, we performed the standard patch test in 129 patients, suspected having allergic contact dermatitis at Department of Dermatology, King Chulalongkorn Memorial Hospital, Thailand from June 1, 2003 to September 1, 2004. The rate of positive standard patch test is 59.7% (n = 77/129). The most 3 common positive allergens were nickel sulfate (18.60%), cobalt chloride (17.05%) and fragrance mix (14.73%), respectively. The chance of positive standard patch test significantly correlated with sex (woman), initial diagnosis as contact dermatitis and history of house-worker (p = 0.017, p = 0.005 and p = 0.023, respectively). Whereas, there were no significant correlation between the chance of positive standard patch test and age of patient, location of lesion, history of recurrence, history of atopy, history of drug and food allergy. In addition, history of metal allergy significantly correlated with the chance of positive nickel sulfate or cobalt chloride in standard patch test (p = 0.017). In conclusion, this study demonstrated the prevalence of causative allergen of contact dermatitis in Thai patients using that standard patch test. Moreover, our data shown that the chance positive standard patch test was greater in patient, who were women or initial diagnosed as contact dermatitis or had history of houseworker or history of metal allergy.

Effect of implanted doses of N+-ions on the contact resistance of copper contacts

International Nuclear Information System (INIS)

Dubravec, B.; Kovac, P.; Lipka, F.; Padysak, M.

1997-01-01

The paper deals with the effect of implanted doses of N + ions on the contact resistance. Dependencies of the contact resistance versus contact force R c =f(F c ) and microhardness of implanted surfaces were measured for three implanted profiles. The influence of the aggressive environs on the contact resistance of implanted contact is given too

Examination of employment in the atomic energy field

International Nuclear Information System (INIS)

Baker, J.G.

1978-02-01

This study, which focuses on the years 1968--1975, singles out important employment trends in the atomic energy field and develops causal explanations for these trends. The study also provides a descriptive profile of employment in the field. Employment in the atomic energy field has grown from 138,519 in 1963 to 197,466 in 1975, an annual rate of 3.0 percent. The deployment of scientists, engineers, and technicians in the government-owned, contractor-operated (GOCO) sector changed little from 1968 to 1975. Private sector deployment altered considerably, with a large increase. Within the scientist group, the GOCO sector employment by field has changed little from 1968 to 1975. Private sector scientists have seen considerable alteration of their employment. There has been little change in the employment shares of engineering fields in the GOCO sector for the 1968 to 1975 period. Private sector engineers have seen much greater change, with civil engineers increasing their share 6% to 11%. Of all GOCO technicians, physical science technicians have increased their employment share from 12% to 17%. Of all private sector technicians, draftsmen have increased their share from 29% to 37% and reactor operators from 4% to 7%. Total employment in the field is shifting toward smaller firms. Employment by region has changed considerably in the private sector from 1968 to 1975. GOCO regional employment has also changed. The percentage of scientists and engineers involved in research and development has declined from 68% in 1968 to 39% in 1975. Three private sector industrial segments--reactor design and manufacturing, nuclear facilities design and engineering, and operation and maintenance of reactors--have experienced tremendous growth from 1968 to 1975. 8 figures, 32 tables

WORK OVERLOAD AND TURNOVER INTENTION OF JUNIOR AUDITORS IN GREATER JAKARTA, INDONESIA

Directory of Open Access Journals (Sweden)

Andika Pradana

2015-11-01

Full Text Available This paper aims to analyze how work overload influences turnover intentions of newly hired junior auditors in public accounting offices. Job satisfaction, work related stress and work life conflicts are used as mediating variables between work overload and turnover intention. This study employed 141 auditors from several accounting firms operating in the Greater Jakarta region. The sample was selected using purposive sampling. Three mediation hypotheses were tested using Structural Equation Modeling (SEM. The results show that work overload has a significant effect on increas- ing turnover intention through both job satisfaction and work related stress. In comparison, work overload does not influence turnover intention through work life balance. This may be due to the nature of the respondents, in which a majority of the newly hired accountants employed in this study are unmarried.

Electrical contacts principles and applications

CERN Document Server

Slade, Paul G

2013-01-01

Covering the theory, application, and testing of contact materials, Electrical Contacts: Principles and Applications, Second Edition introduces a thorough discussion on making electric contact and contact interface conduction; presents a general outline of, and measurement techniques for, important corrosion mechanisms; considers the results of contact wear when plug-in connections are made and broken; investigates the effect of thin noble metal plating on electronic connections; and relates crucial considerations for making high- and low-power contact joints. It examines contact use in switch

Investing in Women’s Employment : Good for Business, Good for Development

OpenAIRE

International Finance Corporation

2013-01-01

Economic growth is more robust and sustainable when women and men alike participate fully in the labor market. Better jobs for women, employment that leads to higher wages and greater decision-making, also have a positive influence on the ways households spend money on children s nutrition, health, and education. Meanwhile, companies that invest in women s employment gain an important competitive advantage. Yet despite the persuasive evidence that gender equality has a transformative effect o...

Informing disease models with temporal and spatial contact structure among GPS-collared individuals in wild populations.

Directory of Open Access Journals (Sweden)

David M Williams

Full Text Available Contacts between hosts are essential for transmission of many infectious agents. Understanding how contacts, and thus transmission rates, occur in space and time is critical to effectively responding to disease outbreaks in free-ranging animal populations. Contacts between animals in the wild are often difficult to observe or measure directly. Instead, one must infer contacts from metrics such as proximity in space and time. Our objective was to examine how contacts between white-tailed deer (Odocoileus virginianus vary in space and among seasons. We used GPS movement data from 71 deer in central New York State to quantify potential direct contacts between deer and indirect overlap in space use across time and space. Daily probabilities of direct contact decreased from winter (0.05-0.14, to low levels post-parturition through summer (0.00-0.02, and increased during the rut to winter levels. The cumulative distribution for the spatial structure of direct and indirect contact probabilities around a hypothetical point of occurrence increased rapidly with distance for deer pairs separated by 1,000 m-7,000 m. Ninety-five percent of the probabilities of direct contact occurred among deer pairs within 8,500 m of one another, and 99% within 10,900 m. Probabilities of indirect contact accumulated across greater spatial extents: 95% at 11,900 m and 99% at 49,000 m. Contacts were spatially consistent across seasons, indicating that although contact rates differ seasonally, they occur proportionally across similar landscape extents. Distributions of contact probabilities across space can inform management decisions for assessing risk and allocating resources in response.

Ocular surface displacement with and without contact lenses during non-contact tonometry.

Directory of Open Access Journals (Sweden)

Ulfah Rimayanti

Full Text Available PURPOSE: To evaluate the displacement of the central ocular surface during non-contact tonometry with and without soft contact lenses and determine the factors associated with the displacement of the central ocular surface and intraocular pressure (IOP reading changes caused by wearing soft contact lenses (CLs. METHODS: One eye each in 21 subjects was studied. The cornea was photographed using a high-speed camera at 5,000 frames/sec during non-contact tonometry without contact lenses (NCL, with -5.0 diopters (D, -0.5 D and +5.0 D CL. The displacement of the ocular surface and the factors affecting displacement at the IOP reading and maximum displacement time were investigated. RESULTS: The IOP readings while wearing +5 D CL were significantly higher than those obtained while wearing -5 D CL. The ocular surface displacement between +5 D CL and other groups were significantly different. A significant positive correlation was found between the ocular surface displacement of subjects at the IOP reading time and the IOP obtained with the non-contact tonometer. A significant negative correlation was found between the ocular surface curvature and the IOP obtained using the non-contact tonometer. The radius of curvature of the ocular surface affected the displacement during the IOP reading and maximum displacement time. CONCLUSIONS: Our results indicate that soft contact lens use changes the ocular surface behavior and IOP readings during non-contact tonometry. The radius of curvature of the eye affects the ocular surface displacement and IOP readings in this situation.

Greater-than-Class C low-level radioactive waste characterization. Appendix D-3: Characterization of greater-than-Class C low-level radioactive waste from other generators

International Nuclear Information System (INIS)

Fish, L.W.

1994-09-01

The Other Generators category includes all greater-than-Class C low-level radioactive waste (GTCC LLW) that is not generated or held by nuclear utilities or sealed sources licensees or that is not stored at Department of Energy facilities. To determine the amount of waste within this category, 90 LLW generators were contacted; 13 fit the Other Generators category. Based on information received from the 13 identified Other Generators, the GTCC LLW Management Program was able to (a) characterize the nature of industries in this category, (b) estimate the 1993 inventory of Other Generator waste for high, base, and low cases, and (c) project inventories to the year 2035 for high, base, and low cases. Assumptions were applied to each of the case estimates to account for generators who may not have been identified in this study

Lifetime limitations of ohmic, contacting RF MEMS switches with Au, Pt and Ir contact materials due to accumulation of ‘friction polymer’ on the contacts

International Nuclear Information System (INIS)

Czaplewski, David A; Nordquist, Christopher D; Dyck, Christopher W; Patrizi, Gary A; Kraus, Garth M; Cowan, William D

2012-01-01

We present lifetime limitations and failure analysis of many packaged RF MEMS ohmic contacting switches with Au–Au, Au–Ir, and Au–Pt contact materials operating with 100 µN of contact force per contact in hermetically sealed glass wall packages. All metals were tested using the same switch design in a controlled environment to provide a comparison between the performance of the different materials and their corresponding failure mechanisms. The switch lifetimes of the different contact materials varied from several hundred cycles to 200 million cycles with different mechanisms causing failures for different contact materials. Switches with Au–Au contacts failed due to adhesion when thoroughly cleaned while switches with dissimilar metal contacts (Au–Ir and Au–Pt) operated without adhesion failures but failed due to carbon accumulation on the contacts even in a clean, packaged environment as a result of the catalytic behavior of the contact materials. Switch lifetimes correlated inversely with catalytic behavior of the contact metals. The data suggests the path to increase switch lifetime is to use favorable catalytic materials as contacts, design switches with higher contact forces to break through any residual contamination, and use cleaner, probably smaller, packages. (paper)

Contact inhibition and interferon (IFN)-modulated gene expression

Energy Technology Data Exchange (ETDEWEB)

Kulesh, D.A.

1986-01-01

The relationship between cell morphology, proliferation and contact inhibition was studied in normal and malignant human cells which varied in their sensitivity to contact inhibition. Their ability to proliferate was examined under conditions where the cells were constrained into different shapes. Cell proliferation was quantitated by labeling indices, which were inferred by autoradiography, and by total cell counts. The normal cells (JHU-1, IMR-90) were dependent on cell shape for proliferation capability while the transformed cells (RT4, HT1080) were shape-dependent for proliferation. Interferon (IFN) induced shape-dependent proliferation and contact inhibition in the transformed cells when used at subantiproliferative concentrations. This ability of B-IFN to confer a level of proliferation control which is characteristic of normal fibroblasts suggests a possible relationship between gene expression mediated by IFN and those genes involved in the maintenance of regulated cell proliferation. To evaluate this possibility, cDNA libraries were constructed from IFN-treated and untreated HT1080 cells. The resulting 10 IFN-induced and 11 IFN-repressed sequences were then differentially rescreened using /sup 32/P-cDNA probes. This screening resulted in the identification of at least four cDNA sequences which appeared to be proliferation regulated as well as IFN-modulated. These cloned, regulated cDNA sequences were then used as /sup 32/P-labeled probes to study both the gene expression at the mRNA level employing Northern blotting and slot blotting techniques.

Analysis of the evolvement of contact wire wear irregularity in railway catenary based on historical data

NARCIS (Netherlands)

Wang, H.; Nunez Vicencio, Alfredo; Liu, Zhigang; Song, Yang; Duan, Fuchuan; Dollevoet, R.P.B.J.

2017-01-01

This paper studies the evolvement of the wear irregularity of contact wire using wire thickness data measured yearly from a section of railway catenary. The power spectral density and time–frequency representation based on the wavelet transform are employed for data analysis, with an emphasis on

Purchasing cooperatives for small employers.

Science.gov (United States)

Mallozzi, J

1997-12-01

Despite a booming economy, the number of uninsured Americans is rising. It hit nearly 42 million in 1996. Many of the uninsured work at businesses with fewer than 50 employees. Because small firms have traditionally found it difficult to provide health benefits, purchasing cooperatives have grown in scope and size across the country in recent years. By bringing small businesses together to buy insurance as a group, these organizations can help employers provide greater choice to their workers at a lower cost. However, to operate well in the insurance market, purchasing cooperatives must be well-designed and provided with adequate legal protections.

Negative intergroup contact is more influential, but positive intergroup contact is more common: Assessing contact prominence and contact prevalence in five Central European countries

Czech Academy of Sciences Publication Activity Database

Graf, Sylvie; Paolini, S.; Rubin, M.

2014-01-01

Roč. 44, č. 96 (2014), 536–547 ISSN 0046-2772 R&D Projects: GA ČR GA13-25656S Institutional support: RVO:68081740 Keywords : intergroup contact * negative contact * outgroup attitudes Subject RIV: AN - Psychology Impact factor: 1.712, year: 2014

Forefoot angle at initial contact determines the amplitude of forefoot and rearfoot eversion during running.

Science.gov (United States)

Monaghan, Gail M; Hsu, Wen-Hao; Lewis, Cara L; Saltzman, Elliot; Hamill, Joseph; Holt, Kenneth G

2014-09-01

Clinically, foot structures are assessed intrinsically - relation of forefoot to rearfoot and rearfoot to leg. We have argued that, from a biomechanical perspective, the interaction of the foot with the ground may influence forces and torques that are propagated through the lower extremity. We proposed that a more appropriate measure is an extrinsic one that may predict the angle the foot makes with ground at contact. The purposes of this study were to determine if the proposed measure predicts contact angles of the forefoot and rearfoot and assess if the magnitude of those angles influences amplitude and duration of foot eversion during running. With the individual in prone, extrinsic clinical forefoot and rearfoot angles were measured relative to the caudal edge of the examination table. Participants ran over ground while frontal plane forefoot and rearfoot contact angles, forefoot and rearfoot eversion amplitude and duration were measured. Participants were grouped twice, once based on forefoot contact inversion angle (moderatemedian) and once based on rearfoot contact inversion angle (moderatemedian). The forefoot and rearfoot extrinsic clinical angles predicted, respectively, the forefoot and rearfoot angles at ground contact. Large forefoot contact angles were associated with greater amplitudes (but not durations) of forefoot and rearfoot eversion during stance. Rearfoot contact angles, however, were associated with neither amplitudes nor durations of forefoot and rearfoot eversion. Possible mechanisms for the increased risk of running injuries associated with large forefoot angles are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Three Different Ways of Calibrating Burger's Contact Model for Viscoelastic Model of Asphalt Mixtures by Discrete Element Method

DEFF Research Database (Denmark)

Feng, Huan; Pettinari, Matteo; Stang, Henrik

2016-01-01

modulus. Three different approaches have been used and compared for calibrating the Burger's contact model. Values of the dynamic modulus and phase angle of asphalt mixtures were predicted by conducting DE simulation under dynamic strain control loading. The excellent agreement between the predicted......In this paper the viscoelastic behavior of asphalt mixture was investigated by employing a three-dimensional discrete element method. Combined with Burger's model, three contact models were used for the construction of constitutive asphalt mixture model with viscoelastic properties...

Cyclic voltammetric investigations of microstructured and platinum-covered glassy carbon electrodes in contact with a polymer electrolyte membrane

Energy Technology Data Exchange (ETDEWEB)

Scherer, G G; Veziridis, Z; Staub, M [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Freimuth, H [Inst. fuer Mikrotechnik Mainz IMM, Mainz (Germany)

1997-06-01

Model gas diffusion electrodes were prepared by microstructuring glassy carbon surfaces with high aspect ratios and subsequent deposition of platinum. These electrodes were characterized by hydrogen under-potential deposition (H-upd) in contact with a polymer electrolyte membrane employing cyclic voltametry. H-upd was found on platinum areas not in direct contact to the solid electrolyte, as long as a continuous platinum-path existed. A carbon surface between platinum acts as barrier for H-upd. (author) 4 figs., 5 refs.

Contact Angle Goniometer

Data.gov (United States)

Federal Laboratory Consortium — Description:The FTA32 goniometer provides video-based contact angle and surface tension measurement. Contact angles are measured by fitting a mathematical expression...

The steady-state tangential contact problem for a falling drop type of contact area on corrugated rail by simplified theory of rolling contact

Science.gov (United States)

Piotrowski, Jerzy

1991-10-01

Investigation of contact mechanical nonlinearities of a mathematical model of corrugation revealed that the typical shape of contact patch resembles a falling drop of water. A contact patch of that shape was approximated with a figure composed of two parts of ellipses with different eccentricities. The contact pressure distribution was assumed as a smoothing ensemble of two paraboloidal distributions. The description of a general case of double half elliptical contact area was given but a special case of double half elliptical contact is more interesting as it possesses some Hertzian properties. It was shown how three geometrical parameters of double half elliptical contact can be chosen when actual, non-Hertzian contact is known. A linear theory was written which indicates that the lateral vibrations of the rail may be excited only due to shape variation on corrugation even if any other cause for these vibrations does not exist. For nonlinear theory a computer program, based on FASTSIM algorithm by Kalker, was written. The aim is to calculate the creep forces and frictional power density distribution over the contact area. Also, a graphic program visualizing the solution was written. Numerical results are not provided; unattended and unsolved problems relevant for this type of contact are listed.

Taking advantage of local structure descriptors to analyze interresidue contacts in protein structures and protein complexes.

Science.gov (United States)

Martin, Juliette; Regad, Leslie; Etchebest, Catherine; Camproux, Anne-Claude

2008-11-15

Interresidue protein contacts in proteins structures and at protein-protein interface are classically described by the amino acid types of interacting residues and the local structural context of the contact, if any, is described using secondary structures. In this study, we present an alternate analysis of interresidue contact using local structures defined by the structural alphabet introduced by Camproux et al. This structural alphabet allows to describe a 3D structure as a sequence of prototype fragments called structural letters, of 27 different types. Each residue can then be assigned to a particular local structure, even in loop regions. The analysis of interresidue contacts within protein structures defined using Voronoï tessellations reveals that pairwise contact specificity is greater in terms of structural letters than amino acids. Using a simple heuristic based on specificity score comparison, we find that 74% of the long-range contacts within protein structures are better described using structural letters than amino acid types. The investigation is extended to a set of protein-protein complexes, showing that the similar global rules apply as for intraprotein contacts, with 64% of the interprotein contacts best described by local structures. We then present an evaluation of pairing functions integrating structural letters to decoy scoring and show that some complexes could benefit from the use of structural letter-based pairing functions.

78 FR 14549 - National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey

Science.gov (United States)

2013-03-06

...] National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey AGENCY... National Contact Center customer evaluation surveys. In this request, the previously approved surveys have... several months. These temporary surveys will allow the National Contact Center to compare its customer...

Effect of interfaces on electron transport properties of MoS2-Au Contacts

Science.gov (United States)

Aminpour, Maral; Hapala, Prokop; Le, Duy; Jelinek, Pavel; Rahman, Talat S.; Rahman's Group Collaboration; Nanosurf Lab Collaboration

2014-03-01

Single layer MoS2 is a promising material for future electronic devices such as transistors since it has good transport characteristics with mobility greater than 200 cm-1V-1s-1 and on-off current ratios up to 108. However, before MoS2 can become a mainstream electronic material for the semiconductor industry, the design of low resistive metal-semiconductor junctions as contacts of the electronic devices needs to be addressed and studied systematically. We have examined the effect of Au contacts on the electronic transport properties of single layer MoS2 using density functional theory in combination with the non-equilibrium Green's function method. The Schottky barrier between Au contact and MoS2, transmission spectra, and I-V curves will be reported and discussed as a function of MoS2 and Au interfaces of varying geometry. This work is supported in part by the US Department of Energy under grant DE-FG02-07ER15842.

Soldiers’ employment attitude and employability: An exploratory study

Directory of Open Access Journals (Sweden)

Peng Gao

2015-04-01

Full Text Available Purpose: Nowadays it is very difficult for Chinese retired soldiers to find proper jobs, and the primary reason is the significant gap between job requirements and soldiers owned job skills. Therefore, it is very important to improve the soldiers’ job skills and enhance their understanding of employment.Design/methodology/approach: This paper expands the study scope from the soldiers’ job skills to the employability, initiatively introduces the employment attitude which has obvious impact on the employment of soldiers, and analyses the influence that employment attitude can play on employability. At last, this paper develops statistical method to find the relationship between soldiers’ employment attitude and employability.Findings: The empirical analysis shows that soldiers’ employment attitude has the positive linkage with employability, which makes the employment attitude a measurable variable for the employability rather than an absolute standard.Research limitations/implications: According to the research purpose, more variables should be considered in the model, consequently, there are only three indicators to describe solders’ employment attitude and four indicators to describe solders’ employability.Originality/value: This paper takes research on soldiers’ employability in a new perspective. The soldiers’ employment attitude is served as the entry point, showing the influence that soldiers’ employment attitude has on employability.

A contact angle hysteresis model based on the fractal structure of contact line.

Science.gov (United States)

Wu, Shuai; Ma, Ming

2017-11-01

Contact angle is one of the most popular concept used in fields such as wetting, transport and microfludics. In practice, different contact angles such as equilibrium, receding and advancing contact angles are observed due to hysteresis. The connection among these contact angles is important in revealing the chemical and physical properties of surfaces related to wetting. Inspired by the fractal structure of contact line, we propose a single parameter model depicting the connection of the three angles. This parameter is decided by the fractal structure of the contact line. The results of this model agree with experimental observations. In certain cases, it can be reduced to other existing models. It also provides a new point of view in understanding the physical nature of the contact angle hysteresis. Interestingly, some counter-intuitive phenomena, such as the binary receding angles, are indicated in this model, which are waited to be validated by experiments. Copyright © 2017 Elsevier Inc. All rights reserved.

The influence of muscle pennation angle and cross-sectional area on contact forces in the ankle joint.

Science.gov (United States)

Sopher, Ran S; Amis, Andrew A; Davies, D Ceri; Jeffers, Jonathan Rt

2017-01-01

Data about a muscle's fibre pennation angle and physiological cross-sectional area are used in musculoskeletal modelling to estimate muscle forces, which are used to calculate joint contact forces. For the leg, muscle architecture data are derived from studies that measured pennation angle at the muscle surface, but not deep within it. Musculoskeletal models developed to estimate joint contact loads have usually been based on the mean values of pennation angle and physiological cross-sectional area. Therefore, the first aim of this study was to investigate differences between superficial and deep pennation angles within each muscle acting over the ankle and predict how differences may influence muscle forces calculated in musculoskeletal modelling. The second aim was to investigate how inter-subject variability in physiological cross-sectional area and pennation angle affects calculated ankle contact forces. Eight cadaveric legs were dissected to excise the muscles acting over the ankle. The mean surface and deep pennation angles, fibre length and physiological cross-sectional area were measured. Cluster analysis was applied to group the muscles according to their architectural characteristics. A previously validated OpenSim model was used to estimate ankle muscle forces and contact loads using architecture data from all eight limbs. The mean surface pennation angle for soleus was significantly greater (54%) than the mean deep pennation angle. Cluster analysis revealed three groups of muscles with similar architecture and function: deep plantarflexors and peroneals, superficial plantarflexors and dorsiflexors. Peak ankle contact force was predicted to occur before toe-off, with magnitude greater than five times bodyweight. Inter-specimen variability in contact force was smallest at peak force. These findings will help improve the development of experimental and computational musculoskeletal models by providing data to estimate force based on both surface and deep

Experimental determination of the thermal contact conductance between two solid surfaces by the energy pulse technique

International Nuclear Information System (INIS)

Rubin, Gerson Antonio

1979-01-01

An experimental procedure for the determination of the thermal contact conductance between two solid surfaces as a function of the contact pressure and the energy of the laser radiation has been developed using the laser pulse method. A rubi laser with variable energy levels was employed as a radiating pulse energy source. The laser beam was allowed to impinge perpendicularly on the front face of a electrolytic iron 73 4 . The temperature fluctuations resulting on the back surface of the sample was detected by a thermocouple, which Is coupled to a PDP-11/45 Computer 32 Kbytes of memory, through a Analog-Digital Converter. A theoretical function, derived exclusively for the problem mentioned in this work, was adjusted by a method of least square fitting of experimental results. This adjustment yielded the value of a parameter related to the contact conductance between two surfaces. The experimental error obtained for the thermal contact conductance was +- 4.9%. (author)

Mechanical Contact Experiments and Simulations

DEFF Research Database (Denmark)

Nielsen, Chris Valentin; Martins, P; Zhang, W.

2011-01-01

Mechanical contact is studied under dynamic development by means of a combined numerical and experimental investigation. The experiments are designed to allow dynamical development of non-planar contact areas with significant expansion in all three directions as the load is increased. Different....... The overall investigation serves for testing and validating the numerical implementation of the mechanical contact, which is one of the main contributions to a system intended for 3D simulation of resistance welding. Correct modelling of contact between parts to be welded, as well as contact with electrodes......, is crucial for satisfactory modelling of the resistance welding process. The resistance heating at the contact interfaces depends on both contact area and pressure, and as the contact areas develop dynamically, the presented tests are relevant for assessing the validity and accuracy of the mechanical contact...

Phonon Transport through Nanoscale Contact in Tip-Based Thermal Analysis of Nanomaterials.

Science.gov (United States)

Dulhani, Jay; Lee, Bong Jae

2017-07-28

Nanomaterials have been actively employed in various applications for energy and sustainability, such as biosensing, gas sensing, solar thermal energy conversion, passive radiative cooling, etc. Understanding thermal transports inside such nanomaterials is crucial for optimizing their performance for different applications. In order to probe the thermal transport inside nanomaterials or nanostructures, tip-based nanoscale thermometry has often been employed. It has been well known that phonon transport in nanometer scale is fundamentally different from that occurred in macroscale. Therefore, Fourier's law that relies on the diffusion approximation is not ideally suitable for describing the phonon transport occurred in nanostructures and/or through nanoscale contact. In the present study, the gray Boltzmann transport equation (BTE) is numerically solved using finite volume method. Based on the gray BTE, phonon transport through the constriction formed by a probe itself as well as the nanoscale contact between the probe tip and the specimen is investigated. The interaction of a probe and a specimen (i.e., treated as a substrate) is explored qualitatively by analyzing the temperature variation in the tip-substrate configuration. Besides, each contribution of a probe tip, tip-substrate interface, and a substrate to the thermal resistance are analyzed for wide ranges of the constriction ratio of the probe.

Colored Contact Lens Dangers

Medline Plus

Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... Costume Contact Lenses Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell colored ...

Comparison of a new non-contact tonometer with Goldmann applanation.

Science.gov (United States)

Moseley, M J; Evans, N M; Fielder, A R

1989-01-01

A comparison of a new non-contact tonometer (Keeler Pulsair: Keeler UK Ltd) with the Goldmann applanation tonometer is reported. Measurements of intraocular pressure were obtained from 182 eyes of 94 patients. At low pressures (less than 10 mmHg) the candidate tonometer tended to overestimate pressures obtained with the Goldmann tonometer whilst at high pressures (greater than 19 mmHg) those obtained by Goldmann applanation were underestimated. Between 10 and 19 mmHg there was no significant difference between readings obtained with either method. Up to 71% of averaged Pulsair measurements fell within +/- 3 mmHg of those obtained with the Goldmann tonometer increasing to 78% if pressures greater than or equal to 30 mmHg obtained with the Pulsair tonometer were excluded. Adopting a screening criterion of greater than or equal to 21 mmHg (Goldmann) resulted in a sensitivity of 85% and a specificity of 95%. Some evidence that serial Pulsair readings are influenced by the ocular pulse is presented. It is concluded that the Pulsair tonometer can provide clinically useful measurements of intraocular pressure.

The Complexities of Stability - how and why the Nordic employers stay put

DEFF Research Database (Denmark)

Andersen, Søren Kaj; Dølvik, Jon Erik; Ibsen, Christian Lyhne

for the emergence and persistence of the Nordic bargaining models (e.g. Korpi 2006). Conversely, other scholars have stressed how employers drove greater coordination in the search for greater internal control over labor and product markets (e.g. Due et al. 1994; Swenson 1991). Recently, Martin and Swank (2012......) have traced the persistence of macro-coordination to multi-party structures in the early 20th century in which business friendly right-wing political parties were squeezed between class interests of labor and agriculture. This squeeze prompted employers to coordinate in order to counter-weigh labor...... theoretical implications of our study for the field of industrial relations and comparative political economy. The article is based on empirical studies carried out in 2013 and 2014 for SAMAK, a joint committee of the Nordic Social Democratic labor movement....

Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests

Science.gov (United States)

Savrai, R. A.; Makarov, A. V.; Osintseva, A. L.; Malygina, I. Yu.

2018-02-01

Mechanical testing of the AISI 321 corrosion resistant austenitic steel for contact gigacycle fatigue has been conducted with the application of a new method of contact fatigue testing with ultrasonic frequency of loading according to a pulsing impact "plane-to-plane" contact scheme. It has been found that the contact endurance (the ability to resist the fatigue spalling) of the AISI 321 steel under contact gigacycle fatigue loading is determined by its plasticity margin and the possibility of additional hardening under contact loading. It is demonstrated that the appearance of localized deep and long areas of spalling on a material surface can serve as a qualitative characteristic for the loss of the fatigue strength of the AISI 321 steel under impact contact fatigue loading. The value of surface microhardness measured within contact spots and the maximum depth of contact damages in the peripheral zone of contact spots can serve as quantitative criteria for that purpose.

Colored Contact Lens Dangers

Medline Plus

Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

Evaluation of contact sensitivity to topical drugs in patients with contact dermatitis

Directory of Open Access Journals (Sweden)

Bilge Bülbül Şen

2013-03-01

Full Text Available Background and Design: Topical drugs are an important group of contact allergens. The present study aimed to evaluate contact sensitivity to topical drugs in patients with contact dermatitis. Materials and Methods: Between 2003 and 2008, 129 patients were followed up at the Department of Dermatology at Ankara University School of Medicine with clinically suspected contact sensitivity to topical drugs. In this study, the patch test reactions to the European Standard Battery and topical drugs used by the patients and medicament patch test results were evaluated. Results: Positive patch test reaction to one or more allergens was found in 80 (62.0% of 129 patients included in the study. Sixty-one of the 80 patients (61/129, 47.3% had positive patch test reaction to medicaments. Medicament sensitivity was detected in 37.9% (49/129 of subjects. Nitrofurazone was found to be the most common allergen (18.6%. Discussion: The present study showed that topical drugs are a frequent cause of allergic contact dermatitis. Therefore, the probability of contact sensitivity to topical drugs should also be considered in patients with the clinical diagnosis of allergic contact dermatitis and, suspected cases should be evaluated further with patch testing in order to find the responsible allergens.

Employment insecurity, workplace justice and employees' burnout in Taiwanese employees: a validation study.

Science.gov (United States)

Cheng, Yawen; Huang, Hsun-Yin; Li, Pei-Rong; Hsu, Jin-Huei

2011-12-01

Employment insecurity and workplace injustice are important psychosocial hazards. However, few studies of these associations have been conducted in Chinese-speaking populations. This study evaluated the psychometric properties of a Chinese version of employment insecurity and workplace justice scales, and examined their associations with the levels of workers' burnout status in Taiwanese workers. Study subjects were participants in a national survey of employees in Taiwan, consisting of 9,636 men and 7,406 women. A self-administered questionnaire was used to assess employment insecurity (six items) and workplace justice (nine items), as well as other psychosocial work characteristics. After the survey was completed, in-depth interviews with 10 employees were conducted for a qualitative evaluation. Cronbach's α was 0.87 or greater for the workplace justice scale and 0.76 or greater for the employment insecurity scale, indicating satisfactory internal consistencies. Exploratory factor analyses revealed a factor pattern consistent with the theoretically assumed structure, except that the items with statements in reversed direction were loaded on separated factors. Higher levels of employment insecurity and lower levels of workplace justice were associated with higher burnout scores. However, results from the qualitative interviews suggested that some questionnaire items contained double-barreled questions, and some questions were misinterpreted or considered irrelevant by participants. The Chinese version of employment insecurity and workplace justice scales were found to have satisfactory reliability and validity. However, improvement of these scales is still needed.

Sexual predators, energy development, and conservation in greater Yellowstone.

Science.gov (United States)

Berger, Joel; Beckmann, Jon P

2010-06-01

In the United States, as elsewhere, a growing debate pits national energy policy and homeland security against biological conservation. In rural communities the extraction of fossil fuels is often encouraged because of the employment opportunities it offers, although the concomitant itinerant workforce is often associated with increased wildlife poaching. We explored possible positive and negative factors associated with energy extraction in the Greater Yellowstone Ecosystem (GYE), an area known for its national parks, intact biological diversity, and some of the New World's longest terrestrial migrations. Specifically, we asked whether counties with different economies-recreation (ski), agrarian (ranching or farming), and energy extractive (petroleum)-differed in healthcare (gauged by the abundance of hospital beds) and in the frequency of sexual predators. The absolute and relative frequency of registered sex offenders grew approximately two to three times faster in areas reliant on energy extraction. Healthcare among counties did not differ. The strong conflation of community dishevel, as reflected by in-migrant sexual predators, and ecological decay in Greater Yellowstone is consistent with patterns seen in similar systems from Ecuador to northern Canada, where social and environmental disarray exist around energy boomtowns. In our case, that groups (albeit with different aims) mobilized campaigns to help maintain the quality of rural livelihoods by protecting open space is a positive sign that conservation can matter, especially in the face of rampant and poorly executed energy extraction projects. Our findings further suggest that the public and industry need stronger regulatory action to instill greater vigilance when and where social factors and land conversion impact biological systems.

New GaN Schottky barrier diode employing a trench on AlGaN/GaN heterostructure

Science.gov (United States)

Ha, Min-Woo; Lee, Seung-Chul; Choi, Young-Hwan; Kim, Soo-Seong; Yun, Chong-Man; Han, Min-Koo

2006-10-01

A new GaN Schottky barrier diode employing a trench structure, which is proposed and fabricated, successfully decreases a forward voltage drop without sacrificing any other electric characteristics. The trench is located in the middle of Schottky contact during a mesa etch. The Schottky metal of Pt/Mo/Ti/Au is e-gun evaporated on the 300 nm-deep trench as well as the surface of the proposed GaN Schottky barrier diode. The trench forms the vertical Au Schottky contact and lateral Pt Schottky contact due to the evaporation sequence of Schottky metal. The forward voltage drops of the proposed diode and conventional one are 0.73 V and 1.25 V respectively because the metal work function (5.15 eV) of the vertical Au Schottky contact is considerably less than that of the lateral Pt Schottky contact (5.65 eV). The proposed diode exhibits the low on-resistance of 1.58 mΩ cm 2 while the conventional one exhibits 8.20 mΩ cm 2 due to the decrease of a forward voltage drop.

Dermatitis, contact (image)

Science.gov (United States)

This picture shows a skin inflammation (dermatitis) caused by contact with a material that causes an allergic reaction in this person. Contact dermatitis is a relatively common condition, and can be caused ...

[News on occupational contact dermatitis].

Science.gov (United States)

Crépy, Marie-Noëlle; Bensefa-Colas, Lynda

2014-03-01

Contact dermatitis--irritant contact dermatitis, allergic contact dermatitis and protein contact dermatitis--are the most common occupational skin diseases, most often localized to the hands. Contact urticaria is rarer The main occupational irritants are wet work, detergents and disinfectants, cutting oils, and solvents. The main occupational allergens are rubber additives, metals (chromium, nickel, cobalt), plastics (epoxy resins, acrylic), biocides and plants. Diagnosis is based on clinical examination, medical history and allergy testing. For a number of irritating or sensitizing agents, irritant or allergic dermatitis can be notified as occupational diseases. The two main prevention measures are reducing skin contact with irritants and complete avoidance of skin contact with offending allergens.

Effect of radial head implant shape on joint contact area and location during static loading.

Science.gov (United States)

Shannon, Hannah L; Deluce, Simon R; Lalone, Emily A; Willing, Ryan; King, Graham J W; Johnson, James A

2015-04-01

To examine the effect of implant shape on radiocapitellar joint contact area and location in vitro. We used 8 fresh-frozen cadaveric upper extremities. An elbow loading simulator examined joint contact in pronation, neutral rotation, and supination with the elbow at 90° flexion. Muscle tendons were attached to pneumatic actuators to allow for computer-controlled loading to achieve the desired forearm rotation. We performed testing with the native radial head, an axisymmetric implant, a reverse-engineered patient-specific implant, and a population-based quasi-anatomic implant. Implants were inserted using computer navigation. Contact area and location were quantified using a casting technique. We found no significant difference between contact locations for the native radial head and the 3 implants. All of the implants had a contact area lower than the native radial head; however, only the axisymmetric implant was significantly different. There was no significant difference in contact area between implant shapes. The similar contact areas and locations of the 3 implant designs suggest that the shape of the implant may not be important with respect to radiocapitellar joint contact mechanics when placed optimally using computer navigation. Further work is needed to explore the sensitivity of radial head implant malpositioning on articular contact. The lower contact area of the radial head implants relative to the native radial head is similar to previous benchtop studies and is likely the result of the greater stiffness of the implant. Radial head implant shape does not appear to have a pronounced influence on articular contact, and both axisymmetric and anatomic metal designs result in elevated cartilage stress relative to the intact state. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Lettuce contact allergy.

Science.gov (United States)

Paulsen, Evy; Andersen, Klaus E

2016-02-01

Lettuce (Lactuca sativa L.) and its varieties are important vegetable crops worldwide. They are also well-known, rarely reported, causes of contact allergy. As lettuce allergens and extracts are not commercially available, the allergy may be underdiagnosed. The aims of this article are to present new data on lettuce contact allergy and review the literature. Lettuce is weakly allergenic, and occupational cases are mainly reported. Using aimed patch testing in Compositae-allergic patients, two recent Danish studies showed prevalence rates of positive lettuce reactions of 11% and 22%. The majority of cases are non-occupational, and may partly be caused by cross-reactivity. The sesquiterpene lactone mix seems to be a poor screening agent for lettuce contact allergy, as the prevalence of positive reactions is significantly higher in non-occupationally sensitized patients. Because of the easy degradability of lettuce allergens, it is recommended to patch test with freshly cut lettuce stem and supplement this with Compositae mix. As contact urticaria and protein contact dermatitis may present as dermatitis, it is important to perform prick-to-prick tests, and possibly scratch patch tests as well. Any person who is occupationally exposed to lettuce for longer periods, especially atopics, amateur gardeners, and persons keeping lettuce-eating pets, is potentially at risk of developing lettuce contact allergy. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Mixed Lubricated Line Contacts

NARCIS (Netherlands)

Faraon, I.C.

2005-01-01

The present work deals with friction in mixed lubricated line contacts. Components in systems are becoming smaller and due to, for instance power transmitted, partial contact may occur. In industrial applications, friction between the moving contacting surfaces cannot be avoided, therefore it is

New Cosmetic Contact Allergens

Directory of Open Access Journals (Sweden)

An Goossens

2015-02-01

Full Text Available Allergic and photo-allergic contact dermatitis, and immunologic contact urticaria are potential immune-mediated adverse effects from cosmetics. Fragrance components and preservatives are certainly the most frequently observed allergens; however, all ingredients must be considered when investigating for contact allergy.

Contact and symplectic topology

CERN Document Server

Colin, Vincent; Stipsicz, András

2014-01-01

Symplectic and contact geometry naturally emerged from the mathematical description of classical physics. The discovery of new rigidity phenomena and properties satisfied by these geometric structures launched a new research field worldwide. The intense activity of many European research groups in this field is reflected by the ESF Research Networking Programme "Contact And Symplectic Topology" (CAST). The lectures of the Summer School in Nantes (June 2011) and of the CAST Summer School in Budapest (July 2012) provide a nice panorama of many aspects of the present status of contact and symplectic topology. The notes of the minicourses offer a gentle introduction to topics which have developed in an amazing speed in the recent past. These topics include 3-dimensional and higher dimensional contact topology, Fukaya categories, asymptotically holomorphic methods in contact topology, bordered Floer homology, embedded contact homology, and flexibility results for Stein manifolds.

Follicular contact dermatitis revisited: A review emphasizing neomycin-associated follicular contact dermatitis

Science.gov (United States)

Cohen, Philip R

2014-01-01

Follicular contact dermatitis clinically presents as individual papules that include a central hair follicle. Pathologic features involve the follicle and the surrounding dermis: spongiosis and vesicle formation of the follicular epithelium associated with perifollicular and perivascular lymphocytic inflammation. Using the PubMed database, an extensive literature search was performed on follicular contact dermatitis and neomycin. Relevant papers were reviewed and the clinical and pathologic features, the associated chemicals (including a more detailed description of neomycin), the hypothesized pathogenesis, and the management of follicular contact dermatitis were described. Several agents-either as allergens or irritants-have been reported to elicit follicular contact dermatitis. Several hypotheses have been suggested for the selective involvement of the follicles in follicular contact dermatitis: patient allergenicity, characteristics of the agent, vehicle containing the agent, application of the agent, and external factors. The differential diagnosis of follicular contact dermatitis includes not only recurrent infundibulofolliculitis, but also drug eruption, mite infestation, viral infection, and dermatoses that affect hair follicles. The primary therapeutic intervention for follicular contact dermatitis is withdrawal of the causative agent; treatment with a topical corticosteroid preparation may also promote resolution of the dermatitis. In conclusion, follicular contact dermatitis may be secondary to allergens or irritants; topical antibiotics, including neomycin, may cause this condition. Several factors may account for the selective involvement of the hair follicle in this condition. Treatment of the dermatitis requires withdrawal of the associated topical agent; in addition, topical corticosteroids may be helpful to promote resolution of lesions. PMID:25516854

Contact materials for nanoelectronics

KAUST Repository

Alshareef, Husam N.

2011-02-01

In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena that modify the expected device performance. These reactions have become more challenging and more difficult to control as new materials have been introduced and as device sizes have entered the deep nanoscale. To provide an overview of this field of inquiry, this issue of MRS Bulletin includes articles on gate and contact materials for Si-based devices, junction contact materials for Si-based devices, and contact materials for alternate channel substrates (Ge and III-V), nanodevices. © 2011 Materials Research Society.

Contact Lens-Related Eye Infections

Science.gov (United States)

... Español Eye Health / Eye Health A-Z Contact Lens-Related Eye Infections Sections Contact Lens-Related Eye ... Six Steps to Avoid Contact Lens Infections Contact Lens-Related Eye Infections Leer en Español: Infecciones relacionadas ...

Unwanted sexual advances at work: variations by employment arrangement in a sample of working Australians.

Science.gov (United States)

Lamontagne, Anthony D; Smith, Peter M; Louie, Amber M; Quinlan, Michael; Shoveller, Jean; Ostry, Aleck S

2009-04-01

We tested the hypothesis that the risk of experiencing unwanted sexual advances at work (UWSA) is greater for precariously-employed workers in comparison to those in permanent or continuing employment. A cross-sectional population-based telephone survey was conducted in Victoria (66% response rate, N=1,101). Employment arrangements were analysed using eight differentiated categories, as well as a four-category collapsed measure to address small cell sizes. Self-report of unwanted sexual advances at work was modelled using multiple logistic regression in relation to employment arrangement, controlling for gender, age, and occupational skill level. Forty-seven respondents reported UWSA in our sample (4.3%), mainly among women (37 of 47). Risk of UWSA was higher for younger respondents, but did not vary significantly by occupational skill level or education. In comparison to Permanent Full-Time, three employment arrangements were strongly associated with UWSA after adjustment for age, gender, and occupational skill level: Casual Full-Time OR = 7.2 (95% Confidence Interval 1.7-30.2); Fixed-Term Contract OR = 11.4 (95% CI 3.4-38.8); and Own-Account Self-Employed OR = 3.8 (95% CI 1.2-11.7). In analyses of females only, the magnitude of these associations was further increased. Respondents employed in precarious arrangements were more likely to report being exposed to UWSA, even after adjustment for age and gender. Greater protections from UWSA are likely needed for precariously employed workers.

Are diverse societies less cohesive? Testing contact and mediated contact theories.

Science.gov (United States)

McKenna, Sarah; Lee, Eunro; Klik, Kathleen A; Markus, Andrew; Hewstone, Miles; Reynolds, Katherine J

2018-01-01

Previous research has demonstrated that there is a negative relationship between ethnic diversity in a local community and social cohesion. Often the way social cohesion is assessed, though, varies across studies and only some aspects of the construct are included (e.g., trust). The current research explores the relationship between diversity and social cohesion across a number of indicators of social cohesion including neighbourhood social capital, safety, belonging, generalized trust, and volunteering. Furthermore, social psychological theories concerning the role of positive contact and its impact on feelings of threat are investigated. Using a sample of 1070 third generation 'majority' Australians and structural equation modelling (SEM), findings suggest ethnic diversity is related to positive intergroup contact, and that contact showed beneficial impacts for some indicators of social cohesion both directly and indirectly through reducing perceived threat. When interethnic contact and perceived threat are included in the model there is no direct negative effect between diversity and social cohesion. The theoretical implications of these findings are outlined including the importance of facilitating opportunities for positive contact in diverse communities.

Focusing on Contact Lens Safety

Science.gov (United States)

... their practices. Decorative contacts (also called “costume,” colored,” “fashion,” or “plano” contacts). The FDA has often warned ... Lenses Decorative Contact Lenses Hydrogen Peroxide Solution Related Consumer Updates 'Colored' and Decorative Contact Lenses: A Prescription ...

Mapping the articular contact area of the long head of the biceps tendon on the humeral head.

Science.gov (United States)

Morris, Brent J; Byram, Ian R; Lathrop, Ray A; Dunn, Warren R; Kuhn, John E

2014-01-01

The purpose of this investigation was to calculate the contact surface area of the long head of the biceps (LHB) in neutral position and abduction. We sought to determine whether the LHB articulates with the humeral head in a consistent pattern comparing articular contact area in neutral position and abduction. Eleven fresh frozen matched cadaveric shoulders were analyzed. The path of the biceps tendon on the articular surface of the humeral head and the total articular surface were digitized using a MicronTracker 2 H3-60 three-dimensional optical tracker. Contact surface area was significantly less in abduction than in neutral position (P = 0.002) with a median ratio of 41% (36%, 47.5%). Ratios of contact area in neutral position to full articular surface area were consistent between left and right shoulders (rho = 1, P = 0.017) as were ratios of abduction area to full articular surface area (rho = 0.97, P = 0.005). The articular contact surface area is significantly greater in neutral position than abduction. The ratios of articular contact surface areas to total humeral articular surface areas have a narrow range and are consistent between left and right shoulders of the same cadaver.

Contact mechanical characteristics of Nb3Sn strands under transverse electromagnetic loads in the CICC cross-section

International Nuclear Information System (INIS)

Zhu Jiyue; Luo Wei; Zhou Youhe; Zheng Xiaojing

2012-01-01

This paper presents a new code for the two-dimensional discrete element method (DEM) and relevant simulations to quantitatively characterize the contact force behavior of the Nb 3 Sn strands in the ITER CICC cross-section under a transverse electromagnetic load. In order to obtain the essential parameters in the contact force model employed in the DEM, a simulation of the experiments conducted by Nijhuis et al (2004 IEEE Trans. Appl. Supercond. 14 1489–94) is first performed, where the load–displacement curve predicted by the code is in good agreement with the measurements. After that, the contact force chain between strands and its distribution is quantitatively analyzed by the code. It is found that the contact force distribution among strands is heterogeneous and strongly anisotropic. In other words, the force chain distribution, which determines the behavior of the assembly of strands with discrete media, and the distribution of area average magnitude of the contact force are obviously inhomogeneous. To describe this inhomogeneity, here, the probability density function (PDF) is used in the statistical analysis. The numerical results show that the PDFs of the magnitudes of the resultant contact force, normal contact force, and tangential contact force all decay with an exponential law, and that PDFs of the directions of the contact forces are all anisotropic and exhibit about six periodic changes in which the peak values in the direction parallel to the applied electromagnetic load are appreciably larger than the other peaks. (paper)

Contact-impact algorithms on parallel computers

International Nuclear Information System (INIS)

Zhong Zhihua; Nilsson, Larsgunnar

1994-01-01

Contact-impact algorithms on parallel computers are discussed within the context of explicit finite element analysis. The algorithms concerned include a contact searching algorithm and an algorithm for contact force calculations. The contact searching algorithm is based on the territory concept of the general HITA algorithm. However, no distinction is made between different contact bodies, or between different contact surfaces. All contact segments from contact boundaries are taken as a single set. Hierarchy territories and contact territories are expanded. A three-dimensional bucket sort algorithm is used to sort contact nodes. The defence node algorithm is used in the calculation of contact forces. Both the contact searching algorithm and the defence node algorithm are implemented on the connection machine CM-200. The performance of the algorithms is examined under different circumstances, and numerical results are presented. ((orig.))

Direct measurement of graphene contact resistivity to pre-deposited metal in buried contact test structure

KAUST Repository

Qaisi, Ramy M.; Smith, Casey; Ghoneim, Mohamed T.; Yu, Qingkai; Hussain, Muhammad Mustafa

2013-01-01

We demonstrate a buried contact based novel test structure for direct contact resistivity measurement of graphene-metal interfaces. We also observe excellent contact resistivity 1 μO-cm2 without any additional surface modification suggesting that the intrinsic Au-graphene contact is sufficient for achieving devices with low contact resistance. The chemical mechanical polishing less test structure and data described herein highlights an ideal methodology for systematic screening and engineering of graphene-metal contact resistivity to enable low power high speed carbon electronics. © 2013 IEEE.

Direct measurement of graphene contact resistivity to pre-deposited metal in buried contact test structure

KAUST Repository

Qaisi, Ramy M.

2013-08-01

We demonstrate a buried contact based novel test structure for direct contact resistivity measurement of graphene-metal interfaces. We also observe excellent contact resistivity 1 μO-cm2 without any additional surface modification suggesting that the intrinsic Au-graphene contact is sufficient for achieving devices with low contact resistance. The chemical mechanical polishing less test structure and data described herein highlights an ideal methodology for systematic screening and engineering of graphene-metal contact resistivity to enable low power high speed carbon electronics. © 2013 IEEE.

The Pathways to the First Contact with Mental Health Services among Patients with Schizophrenia in Lagos, Nigeria

Directory of Open Access Journals (Sweden)

Increase Ibukun Adeosun

2013-01-01

Full Text Available There is increasing evidence that delay in the commencement of treatment, following the onset of schizophrenia, may be related to the pathways patients navigate before accessing mental health care. Therefore, insight into the pattern and correlates of pathways to mental care of patients with schizophrenia may inform interventions that could fast track their contact with mental health professionals and reduce the duration of untreated psychosis. This study assessed the pathways to mental health care among patients with schizophrenia (n=138, at their first contact with mental health services at the Federal Neuro-Psychiatric Hospital Yaba Lagos, Nigeria. Traditional and religious healers were the first contact for the majority (69% of the patients. Service users who first contacted nonorthodox healers made a greater number of contacts in the course of seeking help, eventuating in a longer duration of untreated psychosis (P<0.001. However, the delay between the onset of psychosis and contact with the first point of care was shorter in patients who patronized nonorthodox practitioners. The findings suggest that collaboration between orthodox and nonorthodox health services could facilitate the contact of patients with schizophrenia with appropriate treatment, thereby reducing the duration of untreated psychosis. The need for public mental health education is also indicated.

The impact of unemployment on school leavers' perception of health. Mediating effect of financial situation and social contacts?

NARCIS (Netherlands)

Bacikova-Sleskova, Maria; van Dijk, Jitse P.; Geckova, Andrea Madarasova; Nagyova, Iveta; Salonna, Ferdinand; Reijneveld, Sijmen A.; Groothoff, Johan W.

Objectives: The main purpose of this paper is to explore whether unemployment influences adolescents' subjective perception of health and whether perceived financial stress and social contacts can mediate the effect of employment status on health. We are also interested in the differences in

Electrode-Skin contact impedance: In vivo measurements on an ovine model

International Nuclear Information System (INIS)

Nguyen, D T; Kosobrodov, R; Jin, C; McEwan, A; Barry, M A; Chik, W; Thiagalingam, A; Oh, T I

2013-01-01

The problem of electrical impedance between the skin and the electrode is an on-going challenge in bio-electronics. This is particularly true in the case of Electrical Impedance Tomography (EIT), which uses a large number of skin-contact electrodes and is very sensitive to noise. In the present article, contact impedance is measured and compared for a range of electrodes placed on the thorax of an ovine model. The study has been approved by the Westmead Hospital Animal Ethics Committee. The electrode models that were employed in the research are Ag/AgCl electrodes (E1), commonly used for ECG and EIT measurements in both humans and animal models, stainless steel crocodile clips (E2), typically used on animal models, and novel multi-point dry electrodes in two modifications: bronze plated (E3) and nickel plated (E4). Further, since the contact impedance is mostly attributed to the acellular outer layer of the skin, in our experiment, we attempted to study the effect of this layer by comparing the results when the skin is intact and when electrodes are introduced underneath the skin through small cuts. This boundary effect was assessed by comparison of measurements obtained during E2 skin surface contact, and sub-cutaneous contact (E5). Twelve gauge intradermal needles were also tested as an electrode (E6). The full impedance spectrum, from 500 Hz to 300 kHz, was recorded, analysed and compared. As expected, the contact impedance in the more invasive cases, i.e the electrodes under the skin, is significantly lower than in the non-invasive cases. At the frequency of 50 kHz which is commonly used in lung EIT acquisition, electrodes E3, E4 and E6 demonstrated contact impedance of less than 200 Ω, compared to more than 400 Ω measured for electrodes E1, E2 and E5. In conclusion, the novel multipoint electrodes proved to be best suited for EIT purposes, because they are non-invasive and have lower contact impedance than Ag/AgCl and crocodile clips, in both invasive and

Hydrogenation of passivated contacts

Energy Technology Data Exchange (ETDEWEB)

Nemeth, William; Yuan, Hao-Chih; LaSalvia, Vincenzo; Stradins, Pauls; Page, Matthew R.

2018-03-06

Methods of hydrogenation of passivated contacts using materials having hydrogen impurities are provided. An example method includes applying, to a passivated contact, a layer of a material, the material containing hydrogen impurities. The method further includes subsequently annealing the material and subsequently removing the material from the passivated contact.

Tube-Super Dielectric Materials: Electrostatic Capacitors with Energy Density Greater than 200 J·cm-3.

Science.gov (United States)

Cortes, Francisco Javier Quintero; Phillips, Jonathan

2015-09-17

The construction and performance of a second generation of super dielectric material based electrostatic capacitors (EC), with energy density greater than 200 J·cm - ³, which rival the best reported energy density of electric double layer capacitors (EDLC), also known as supercapacitors, are reported. The first generation super dielectric materials (SDM) are multi-material mixtures with dielectric constants greater than 1.0 × 10⁵, composed of a porous, electrically insulating powder filled with a polarizable, ion-containing liquid. Second-generation SDMs (TSDM), introduced here, are anodic titania nanotube arrays filled with concentrated aqueous salt solutions. Capacitors using TiO₂ based TSDM were found to have dielectric constants at ~0 Hz greater than 10⁷ in all cases, a maximum operating voltage of greater than 2 volts and remarkable energy density that surpasses the highest previously reported for EC capacitors by approximately one order of magnitude. A simple model based on the classic ponderable media model was shown to be largely consistent with data from nine EC type capacitors employing TSDM.

Tube-Super Dielectric Materials: Electrostatic Capacitors with Energy Density Greater than 200 J·cm−3

Directory of Open Access Journals (Sweden)

Francisco Javier Quintero Cortes

2015-09-01

Full Text Available The construction and performance of a second generation of super dielectric material based electrostatic capacitors (EC, with energy density greater than 200 J·cm−3, which rival the best reported energy density of electric double layer capacitors (EDLC, also known as supercapacitors, are reported. The first generation super dielectric materials (SDM are multi-material mixtures with dielectric constants greater than 1.0 × 105, composed of a porous, electrically insulating powder filled with a polarizable, ion-containing liquid. Second-generation SDMs (TSDM, introduced here, are anodic titania nanotube arrays filled with concentrated aqueous salt solutions. Capacitors using TiO2 based TSDM were found to have dielectric constants at ~0 Hz greater than 107 in all cases, a maximum operating voltage of greater than 2 volts and remarkable energy density that surpasses the highest previously reported for EC capacitors by approximately one order of magnitude. A simple model based on the classic ponderable media model was shown to be largely consistent with data from nine EC type capacitors employing TSDM.

Leprosy among patient contacts: a multilevel study of risk factors.

Directory of Open Access Journals (Sweden)

Anna M Sales

Full Text Available BACKGROUND: This study aimed to evaluate the risk factors associated with developing leprosy among the contacts of newly-diagnosed leprosy patients. METHODOLOGY/PRINCIPAL FINDINGS: A total of 6,158 contacts and 1,201 leprosy patients of the cohort who were diagnosed and treated at the Leprosy Laboratory of Fiocruz from 1987 to 2007 were included. The contact variables analyzed were sex; age; educational and income levels; blood relationship, if any, to the index case; household or non-household relationship; length of time of close association with the index case; receipt of bacillus Calmette-Guérin (BGG vaccine and presence of BCG scar. Index cases variables included sex, age, educational level, family size, bacillary load, and disability grade. Multilevel logistic regression with random intercept was applied. Among the co-prevalent cases, the leprosy-related variables that remained associated with leprosy included type of household contact, [odds ratio (OR = 1.33, 95% confidence interval (CI: 1.02, 1.73] and consanguinity with the index case, (OR = 1.89, 95% CI: 1.42-2.51. With respect to the index case variables, the factors associated with leprosy among contacts included up to 4 years of schooling and 4 to 10 years of schooling (OR = 2.72, 95% CI: 1.54-4.79 and 2.40, 95% CI: 1.30-4.42, respectively and bacillary load, which increased the chance of leprosy among multibacillary contacts for those with a bacillary index of one to three and greater than three (OR = 1.79, 95% CI: 1.19-2.17 and OR: 4.07-95% CI: 2.73, 6.09, respectively. Among incident cases, household exposure was associated with leprosy (OR = 1.96, 95% CI: 1.29-2.98, compared with non-household exposure. Among the index case risk factors, an elevated bacillary load was the only variable associated with leprosy in the contacts. CONCLUSIONS/SIGNIFICANCE: Biological and social factors appear to be associated with leprosy among co-prevalent cases, whereas the factors related to the

Mathematical Modeling of Contact Problems of Elasticity Theory with Continuous Unilateral Contact

Directory of Open Access Journals (Sweden)

I. V. Stankevich

2015-01-01

Full Text Available The work [1] presents the formulation and numerical solution of the problem concerning the unilateral discrete contact interaction of an elastic body and a rigid half-space. However, many parts and components of engineering structures have a pronounced continuous contact within a given surface [2, 3]. In this paper we consider a special case of this option of contact interaction when, the elastic body of finite size, subjected to external forces, is based on a rigid half-space. Contact occurs through a dedicated contact surface, which in general can change their sizes.Developed to solve this problem, a numerical algorithm is a further adaptation and development of the approaches described in [1]. The paper shows results of solving the model problem of the elasticity theory with and without taking friction into account. In the latter case, were additionally obtained numerical data characterizing the convergence of the solution.

A frictional contact problem with wear involving elastic-viscoplastic materials with damage and thermal effects

Directory of Open Access Journals (Sweden)

Abdelmoumene Djabi

2015-05-01

Full Text Available We consider a mathematical problem for quasistatic contact between a thermo-elastic-viscoplastic body with damage and an obstacle. The contact is frictional and bilateral with a moving rigid foundation which results in the wear of the contacting surface. We employ the thermo-elasticviscoplastic with damage constitutive law for the material. The damage of the material caused by elastic deformations. The evolution of the damage is described by an inclusion of parabolic type. The problem is formulated as a coupled system of an elliptic variational inequality for the displacement, a parabolic variational inequality for the damage and the heat equation for the temperature. We establish a variational formulation for the model and we prove the existence of a unique weak solution to the problem. The proof is based on a classical existence and uniqueness result on parabolic inequalities, differential equations and fixed point arguments.

Tomato contact dermatitis

DEFF Research Database (Denmark)

Paulsen, Evy; Christensen, Lars P; Andersen, Klaus Ejner

2012-01-01

The tomato plant (Solanum lycopersicum) is an important crop worldwide. Whereas immediate-type reactions to tomato fruits are well known, contact dermatitis caused by tomatoes or tomato plants is rarely reported. The aims of this study were to present new data on contact sensitization to tomato...... plants and review the literature on contact dermatitis caused by both plants and fruits. An ether extract of tomato plants made as the original oleoresin plant extracts, was used in aimed patch testing, and between 2005 and 2011. 8 of 93 patients (9%) tested positive to the oleoresin extracts....... This prevalence is in accordance with the older literature that reports tomato plants as occasional sensitizers. The same applies to tomato fruits, which, in addition, may cause protein contact dermatitis. The allergens of the plant are unknown, but both heat-stable and heat-labile constituents seem...

Evaluating Employability Skills: Employer and Student Perceptions

Science.gov (United States)

Saunders, Venetia; Zuzel, Katherine

2010-01-01

Graduate employability is a key issue for Higher Education. In this two-part study student employability skills have been evaluated from the perspective of sandwich students and graduates in biomolecular science, and their employers. A strong correlation was found between employer and sandwich student/graduate perceptions of the relative…

Effect of Contact Pressure on the Resistance Contact Value and Temperature Changes in Copper Busbar Connection

Directory of Open Access Journals (Sweden)

Agus Risdiyanto

2012-12-01

Full Text Available This paper discussed the influence of tightness or contacts pressure on copper busbar joints to determine changes in the value of the initial contact resistance and the maximum temperature at the joint due to high current load. The test sample was copper busbar 3 x 30 mm with configuration of bolted overlapping joint. Increasing contact pressure at the joint was measured to find out its effect on the value of contact resistance. The applied pressure was 6 to 36 MPa. Procedure of contact resistance measurement refer to the ASTM B539 standard using four-wire method. The sample subsequently loaded with the current of 350 A for 60 minutes and the maximum temperature at the joint was measured. The result showed that increasing contact pressure at the busbar joint will reduce the contact resistance and maximum temperature. The increase of contact pressure from 6 to 30 MPa causes decreasing contact resistance from 16 μΩ to 11 μΩ. Further increasing of contact pressure more than 30 MPa did not affect the contact resistance significantly. The lowest temperatur of busbar joint of 54°C was reached at a contact pressure of 36 Mpa.

Ask Dr. Sue--OSHA Requires Employers to Give Hepatitis B Immunization and Protection to First Aiders.

Science.gov (United States)

Aronson, Susan S.

1992-01-01

Explains rules of the Occupational Safety and Health Administration (OSHA) that require employers to protect employees whose jobs may result in worker contact with potentially infectious materials. Describes conditions that apply to violations of OSHA rules. Urges child care programs to formulate plans for compliance with OSHA requirements. (SM)

Contacts to semiconductors

International Nuclear Information System (INIS)

Tove, P.A.

1975-08-01

Contacts to semiconductors play an important role in most semiconductor devices. These devices range from microelectronics to power components, from high-sensitivity light or radiation detectors to light-emitting of microwave-generating components. Silicon is the dominating material but compound semiconductors are increasing in importance. The following survey is an attempt to classify contact properties and the physical mechanisms involved, as well as fabrication methods and methods of investigation. The main interest is in metal-semiconductor type contacts where a few basic concepts are dealt with in some detail. (Auth.)

Contact sensitization and allergic contact dermatitis in patients with eczematous lesions

Directory of Open Access Journals (Sweden)

Perpetua U Ibekwe

2018-01-01

Conclusions: Most ACD patients showed contact sensitization to leather products, metal, and perfume use. This knowledge is important when considering preventive measures. However, further studies are needed to provide more insight into contact allergy in Nigeria.

Fabricating customized hydrogel contact lens

Science.gov (United States)

Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

2016-10-01

Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

Determination of Pesticide Dermal Transfer to Operators & Agricultural Workers through Contact with Sprayed Hard Surfaces.

Science.gov (United States)

Tsakirakis, Angelos N; Kasiotis, Konstantinos M; Anastasiadou, Pelagia; Charistou, Agathi N; Gerritsen-Ebben, Rianda; Glass, C Richard; Machera, Kyriaki

2018-05-20

In the present study, the dermal transfer rate of pesticides to agricultural workers occurring via contact with sprayed hard surfaces was investigated. Cotton gloves were used as dosimeters to collect residues from hard surfaces contaminated by pesticides in greenhouses. Dosimeters, either dry or moistened, were in contact with wood, metal and plastic surfaces previously sprayed. The experimental approach applied mimicked the typical hand contact. Moistened cotton gloves were used to simulate hand moisture from dew/condensation or rainfall. The effect of total duration of contact on the final hand exposure via transfer was investigated. The higher duration contact tested (50-sec) resulted in the higher transfer rates for metal and plastic surfaces; no such effect was noted in case of the wood surface. The pesticide amount transferred from the metal and plastic surfaces to wet gloves was greater than the one transferred to dry gloves. Such trend was not observed for the wood surface. Transfer rates varied from 0.46-77.62% and 0.17-16.90% for wet and dry samples, respectively. The current study has generated new data to quantify the proportion of pesticide deposits dislodged from three different non-crop surfaces when in contact with dry or wet gloves. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Effect of meniscus replacement fixation technique on restoration of knee contact mechanics and stability.

Science.gov (United States)

D'Lima, D D; Chen, P C; Kessler, O; Hoenecke, H R; Colwell, C W

2011-06-01

The menisci are important biomechanical components of the knee. We developed and validated a finite element model of meniscal replacement to assess the effect of surgical fixation technique on contact behavior and knee stability. The geometry of femoral and tibial articular cartilage and menisci was segmented from magnetic resonance images of a normal cadaver knee using MIMICS (Materialise, Leuven, Belgium). A finite element mesh was generated using HyperWorks (Altair Inc, Santa Ana, CA). A finite element solver (Abaqus v6.9, Simulia, Providence, RI) was used to compute contact area and stresses under axial loading and to assess stability (reaction force generated during anteroposterior translation of the femur). The natural and surgical attachments of the meniscal horns and peripheral rim were simulated using springs. After total meniscectomy, femoral contact area decreased by 26% with a concomitant increase in average contact stresses (36%) and peak contact stresses (33%). Replacing the meniscus without suturing the horns did little to restore femoral contact area. Suturing the horns increased contact area and reduced peak contact stresses. Increasing suture stiffness correlated with increased meniscal contact stresses as a greater proportion of tibiofemoral load was transferred to the meniscus. A small incremental benefit was seen of simulated bone plug fixation over the suture construct with the highest stiffness (50 N/mm). Suturing the rim did little to change contact conditions. The nominal anteroposterior stiffness reduced by 3.1 N/mm after meniscectomy. In contrast to contact area and stress, stiffness of the horn fixation sutures had a smaller effect on anteroposterior stability. On the other hand suturing the rim of the meniscus affected anteroposterior stability to a much larger degree. This model emphasizes the importance of the meniscus in knee biomechanics. Appropriate meniscal replacement fixation techniques are likely to be critical to the clinical

Human Capital Quality and Development: An Employers' and Employees' Comparative Insight

Directory of Open Access Journals (Sweden)

Neagu Olimpia

2016-09-01

Full Text Available The aim of the paper is to compare the employers' and employees' insights on human capital quality defining and human capital development at organisational level, based on a survey carried out in the county of Satu Mare, Romania. Our findings show that as human capital buyers, employers understand by human capital quality professional background and skills, professional behaviour and efficiency and productivity for the organisation. As human capital sellers, for employees human capital quality means health and the ability to learn and to be suitable to the job requirements. Regarding the opportunities to develop the organisational human capital, the views of employers and employees are very different when the level of discussion is international (macro-level. Employees consider that the international environment has a greater impact on human capital development in their organisation as the employers.

Treatment, material, care, and patient-related factors in contact lens-related dry eye.

Science.gov (United States)

Ramamoorthy, Padmapriya; Sinnott, Loraine T; Nichols, Jason J

2008-08-01

To examine the effect of general contact lens and material characteristics, care solutions, treatment, and patient-related factors on contact lens-related dry eye. The data were derived from the Contact Lens and Dry Eye Study, designed as a cross-sectional and nested case-control study including 360 subjects. In separate statistical models, logistic regression was used to examine general contact lens characteristics, specific hydrogel lens materials, care solutions, and patient-related factors associated with dry eye status (controlled for age, gender, and current treatments). Several factors were significantly associated with dry eye, including treatment factors such as a recent contact lens refitting (odds ratios [OR] = 5.75, 95% confidence intervals [CI] = 2.14 to 15.46) and use of artificial tears/rewetting drops (OR = 1.09, 95% CI = 1.02 to 1.16), in addition, currently worn materials including Food and Drug Administration (FDA) group II (OR = 2.98, 95% CI = 1.14 to 6.19) and IV (OR = 1.87, 95% CI = 1.08 to 3.24). Significant patient-related factors included decreased overall satisfaction (OR = 3.57, 95% CI = 2.08 to 5.88,), dry eye in the absence of contact lens wear (OR = 6.54, 95% CI = 2.57 to 16.62), reduced daily lens wear duration (OR = 1.16, 95% CI = 1.06 to 1.26), and reduced ability to wear lenses as long as desired (OR = 2.44, 95% CI = 1.30 to 4.54). Care solutions were not associated with contact lens-related dry eye. The strong association of common treatment factors with dry eye status in contact lens wearers suggests that these treatments are not entirely effective. The use of high water content materials was strongly related to dry eye in lens wearers, whereas care solutions were not. Contact lens-related dry eye was also associated with several patient-related factors such as greater ocular discomfort (without lenses), dissatisfaction, and inability to wear lenses for desired durations.

Household Contact Screening and Yield of Tuberculosis Cases-A Clinic Based Study in Chennai, South India.

Directory of Open Access Journals (Sweden)

Dina Nair

Full Text Available Contact investigation is an active case finding strategy to increase detection of Tuberculosis (TB and a key component of TB control programs. The household contacts are at a higher risk of exposure than members of the general population. The information on the value and yield of household contact screening and the approaches used in high incidence settings like India is limited.To evaluate the yield of active case finding in household contacts of newly diagnosed smear positive TB patients and the factors associated with increased yield.Retrospective record review of the household contacts of newly diagnosed sputum smear positive patients (index case enrolled in a clinical trial at National Institute of Research in Tuberculosis, Chennai during the period 2007-2014. A sequential screening algorithm with chest x-ray followed by symptom screen was employed to identify presumptive TB patients.643 household contacts of 280 index TB patients were identified out of which 544 (85% consented for screening. 71/544 (13% patients had an abnormal chest radiograph and out of them 70% were symptomatic. A total of 29/544 (5.3% contacts were found to have TB among whom 23/29 (79% were sputum smear positive. The number needed to screen (NNS to identify a new TB case among all household contacts was 19 and among those with an abnormal CXR was 02. Age group > 44 years, male gender and siblings of the index case was associated with abnormal chest radiograph whereas age group between 15-44 was significantly associated with developing TB disease among household contacts.Active screening among household contacts is an effective way to improve TB case detection. The yield for new TB cases among contacts with abnormal x-ray was high in this study and the use of Chest X-rays in combination with symptom screen is recommended.

Frequency shift and hysteresis suppression in contact-mode AFM using contact stiffness modulation

Directory of Open Access Journals (Sweden)

Belhaq M.

2012-07-01

Full Text Available In this paper the frequency response shift and hysteresis suppression of contact-mode atomic force microscopy is investigated using parametric modulation of the contact stiffness. Based on the Hertzian contact theory, a lumped single degree of freedom oscillator is considered for modeling the cantilever dynamics contact-mode atomic force microscopy. We use the technique of direct partition of motion and the method of multiple scales to obtain, respectively, the slow dynamic and the corresponding slow flow of the system. As results, this study shows that the amplitude of the contact stiffness modulation has a significant effect on the frequency response. Specifically, increasing the amplitude of the stiffness modulation suppresses hysteresis, decreases the peak amplitude and produces shifts towards higher and lower frequencies.

78 FR 30303 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

Science.gov (United States)

2013-05-22

...] National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation Survey... regarding the National Contact Center customer evaluation surveys. In this request, the previously approved... customer service levels to those of private industry contact centers. A notice was published in the Federal...

Skin cooling on contact with cold materials: the effect of blood flow during short-term exposures.

Science.gov (United States)

Jay, Ollie; Havenith, George

2004-03-01

This study investigates the effect of blood flow upon the short-term (cooling response in order to ascertain whether sufferers of circulatory disorders, such as the vasospastic disorder Raynaud's disease, are at a greater risk of cold injury than people with a normal rate of blood flow. Eight female volunteers participated, touching blocks of stainless steel and nylon with a finger contact force of 2.9 N at a surface temperature of -5 degrees C under occluded and vasodilated conditions. Contact temperature (Tc) of the finger pad was measured over time using a T-type thermocouple. Forearm blood flow was measured using strain gauge plethysmography. Contact cooling responses were analysed by fitting a modified Newtonian cooling curve. A significant difference was found between the starting skin temperatures for the two blood flow conditions (Peffect of blood flow was found upon any of the derived cooling curve parameters characterizing the skin cooling response (P>0.05). It is hypothesized that the finger contact force used (2.9 N) and the resultant pressure upon the tissue of the contact finger pad restricted the blood supply to the contact area under both blood flow conditions; therefore, no effect of blood flow was found upon the parameters describing the contact cooling response. Whilst the findings of this study are sufficient to draw a conclusion for those in a working environment, i.e. contact forces below 2.9 N will seldom be encountered, a further study will be required to ascertain conclusively whether blood flow does affect the contact cooling response at a finger contact force low enough to allow unrestricted blood flow to the finger pad. Further protocol improvements are also recommended.

GAS-FOVEAL CONTACT

DEFF Research Database (Denmark)

Alberti, Mark; la Cour, Morten

2018-01-01

PURPOSE: To compare gas-foveal contact in face-down positioning (FDP) and nonsupine positioning (NSP), to analyze causes of gas-foveal separation and to determine how gas-foveal contact affects clinical outcome after idiopathic macular hole repair. METHODS: Single center, randomized controlled...... study. Participants with an idiopathic macular hole were allocated to either FDP or NSP. Primary outcome was gas-foveal contact, calculated by analyzing positioning in relation to intraocular gas fill. Positioning was measured with an electronic device recording positioning for 72 hours postoperatively....... RESULTS: Positioning data were available for 33/35 in the FDP group and 35/37 in the NSP group, thus results are based on 68 analyzed participants. Median gas-foveal contact was 99.82% (range 73.6-100.0) in the FDP group and 99.57% (range 85.3-100.0) in the NSP group (P = 0.22). In a statistical model...

Contact Line Dynamics

Science.gov (United States)

Kreiss, Gunilla; Holmgren, Hanna; Kronbichler, Martin; Ge, Anthony; Brant, Luca

2017-11-01

The conventional no-slip boundary condition leads to a non-integrable stress singularity at a moving contact line. This makes numerical simulations of two-phase flow challenging, especially when capillarity of the contact point is essential for the dynamics of the flow. We will describe a modeling methodology, which is suitable for numerical simulations, and present results from numerical computations. The methodology is based on combining a relation between the apparent contact angle and the contact line velocity, with the similarity solution for Stokes flow at a planar interface. The relation between angle and velocity can be determined by theoretical arguments, or from simulations using a more detailed model. In our approach we have used results from phase field simulations in a small domain, but using a molecular dynamics model should also be possible. In both cases more physics is included and the stress singularity is removed.

Maternal Employment and Parenting Through Middle Childhood: Contextualizing Factors

Science.gov (United States)

Buehler, Cheryl; O’Brien, Marion; Swartout, Kevin M.; Zhou, Nan

2014-01-01

The authors used data from the National Institute of Child Health and Human Development Study of Early Child Care and Youth Development (N = 1,364) to examine maternal work hour status and parenting (sensitivity and learning opportunities) from infancy through middle childhood. Work hour status was conceptualized as nonemployment, part time, and full time. Adjusting for covariates, mothers employed part time had higher sensitivity scores and higher provision of child learning opportunity scores than did mothers who were not employed, and these differences characterized families during early childhood rather than middle childhood. Mothers’ provision of child learning opportunities was greater when employed full time (vs. part time) during early childhood. In addition to child age, mothers’ ethnic minority status and partner status moderated the association between maternal work hour status and mothers’ parenting. In general, the findings supported ideas forwarded by role expansionist theory. PMID:25530631

Land cover mapping of Greater Mesoamerica using MODIS data

Science.gov (United States)

Giri, Chandra; Jenkins, Clinton N.

2005-01-01

A new land cover database of Greater Mesoamerica has been prepared using moderate resolution imaging spectroradiometer (MODIS, 500 m resolution) satellite data. Daily surface reflectance MODIS data and a suite of ancillary data were used in preparing the database by employing a decision tree classification approach. The new land cover data are an improvement over traditional advanced very high resolution radiometer (AVHRR) based land cover data in terms of both spatial and thematic details. The dominant land cover type in Greater Mesoamerica is forest (39%), followed by shrubland (30%) and cropland (22%). Country analysis shows forest as the dominant land cover type in Belize (62%), Cost Rica (52%), Guatemala (53%), Honduras (56%), Nicaragua (53%), and Panama (48%), cropland as the dominant land cover type in El Salvador (60.5%), and shrubland as the dominant land cover type in Mexico (37%). A three-step approach was used to assess the quality of the classified land cover data: (i) qualitative assessment provided good insight in identifying and correcting gross errors; (ii) correlation analysis of MODIS- and Landsat-derived land cover data revealed strong positive association for forest (r2 = 0.88), shrubland (r2 = 0.75), and cropland (r2 = 0.97) but weak positive association for grassland (r2 = 0.26); and (iii) an error matrix generated using unseen training data provided an overall accuracy of 77.3% with a Kappa coefficient of 0.73608. Overall, MODIS 500 m data and the methodology used were found to be quite useful for broad-scale land cover mapping of Greater Mesoamerica.

Mathematical Modeling of Contact Problems of Elasticity Theory with Unilateral Discrete Contact

Directory of Open Access Journals (Sweden)

I. V. Stankevich

2015-01-01

Full Text Available Development and operation of modern machinery and latest technology require reliable estimates of the strength characteristics of the critical elements of structures and technological equipment under the impact of high-intensity thermomechanical loading, accompanied, as a rule, by complex contact interaction. Mathematical modeling of stress-strain state of such parts and components in the contact area, based on adequate mathematical models, modern numerical methods and efficient algorithms that implement the direct determination of displacement fields, strains and stresses, is the main tool that allows fast acquisition of data required for the calculations of strength and durability. The paper considers an algorithm for constructing the numerical solution of the contact problem of elasticity theory in relation to the body, which has an obvious one-sided discrete contact interaction with an elastic half-space. The proposed algorithm is specially designed to have a correction of the tangential forces at discrete contact points, allowing us to achieve sufficiently accurate implementation of the adopted law of friction. The algorithm is embedded in a general finite element technology, with which the application code is generated. Numerical study of discrete unilateral contact interaction of an elastic plate and a rigid half-space showed a high efficiency of the developed algorithm and the application code that implements it.

Non-contact ultrasound techniques

International Nuclear Information System (INIS)

Khazali Mohd Zin

2001-01-01

Non-contact ultrasound plays significant role in material characterisation and inspection. Unlike conventional ultrasonic techniques, non-contact ultrasonic is mostly applicable to areas where the former has its weaknesses and limitations. It is interesting to note that the non-contact ultrasonic technique has an important significant application in industry. The technique is signified by the fact that the object to be inspected is further away from the ultrasonic source, no couplant is needed and inconsistent pressure between the transducer and the specimen can be eliminated. The paper discusses some of the non-contact ultrasound technique and its applications. (Author)

Colors and contact dermatitis.

Science.gov (United States)

Bonamonte, Domenico; Foti, Caterina; Romita, Paolo; Vestita, Michelangelo; Angelini, Gianni

2014-01-01

The diagnosis of skin diseases relies on several clinical signs, among which color is of paramount importance. In this review, we consider certain clinical presentations of both eczematous and noneczematous contact dermatitis in which color plays a peculiar role orientating toward the right diagnosis. The conditions that will be discussed include specific clinical-morphologic subtypes of eczematous contact dermatitis, primary melanocytic, and nonmelanocytic contact hyperchromia, black dermographism, contact chemical leukoderma, and others. Based on the physical, chemical, and biologic factors underlying a healthy skin color, the various skin shades drawing a disease picture are thoroughly debated, stressing their etiopathogenic origins and histopathologic aspects.

Thermal contact resistance measurement of conduction cooled binary current lead joint block in cryocooler based self field I-V characterization facility

Energy Technology Data Exchange (ETDEWEB)

Kundu, Ananya, E-mail: ananya@ipr.res.in; Das, Subrat Kumar; Agarwal, Anees Bano Pooja; Pradhan, Subrata [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India)

2016-05-23

In the present study thermal resistance of conduction cooled current lead joint block employing two different interfacial material namely AlN sheet and Kapton Film have been studied in the temperature range 5K-35K. In each case, the performance of different interlayer materials e.g. Indium foil for moderately pressurized contacts (contact pressure <1 MPa), and Apiezon N Grease, GE varnish for low pressurized contact (contact pressure <1 MPa) is studied. The performances of AlN joint with Indium foil and with Apeizon N Grease are studied and it is observed that the contact resistance reduces more with indium foil as compared to greased contact. The contact resistance measurements of Kapton film with Apiezon N grease and with GE varnish were also carried out in the same temperature range. A comparative study of AlN joint with Indium foil and Kapton with GE varnish as filler material is carried out to demonstrate better candidate material among Kapton and AlN for a particular filler material in the same temperature range.

Working hours, work-life conflict and health in precarious and "permanent" employment.

Science.gov (United States)

Bohle, Philip; Quinlan, Michael; Kennedy, David; Williamson, Ann

2004-12-01

The expansion of precarious employment in OECD countries has been widely associated with negative health and safety effects. Although many shiftworkers are precariously employed, shiftwork research has concentrated on full-time workers in continuing employment. This paper examines the impact of precarious employment on working hours, work-life conflict and health by comparing casual employees to full-time, "permanent" employees working in the same occupations and workplaces. Thirty-nine convergent interviews were conducted in two five-star hotels. The participants included 26 full-time and 13 casual (temporary) employees. They ranged in age from 19 to 61 years and included 17 females and 22 males. Working hours ranged from zero to 73 hours per week. Marked differences emerged between the reports of casual and full-time employees about working hours, work-life conflict and health. Casuals were more likely to work highly irregular hours over which they had little control. Their daily and weekly working hours ranged from very long to very short according to organisational requirements. Long working hours, combined with low predictability and control, produced greater disruption to family and social lives and poorer work-life balance for casuals. Uncoordinated hours across multiple jobs exacerbated these problems in some cases. Health-related issues reported to arise from work-life conflict included sleep disturbance, fatigue and disrupted exercise and dietary regimes. This study identified significant disadvantages of casual employment. In the same hotels, and doing largely the same jobs, casual employees had less desirable and predictable work schedules, greater work-life conflict and more associated health complaints than "permanent" workers.

Detection of stiff nanoparticles within cellular structures by contact resonance atomic force microscopy subsurface nanomechanical imaging.

Science.gov (United States)

Reggente, Melania; Passeri, Daniele; Angeloni, Livia; Scaramuzzo, Francesca Anna; Barteri, Mario; De Angelis, Francesca; Persiconi, Irene; De Stefano, Maria Egle; Rossi, Marco

2017-05-04

Detecting stiff nanoparticles buried in soft biological matrices by atomic force microscopy (AFM) based techniques represents a new frontier in the field of scanning probe microscopies, originally developed as surface characterization methods. Here we report the detection of stiff (magnetic) nanoparticles (NPs) internalized in cells by using contact resonance AFM (CR-AFM) employed as a potentially non-destructive subsurface characterization tool. Magnetite (Fe 3 O 4 ) NPs were internalized in microglial cells from cerebral cortices of mouse embryos of 18 days by phagocytosis. Nanomechanical imaging of cells was performed by detecting the contact resonance frequencies (CRFs) of an AFM cantilever held in contact with the sample. Agglomerates of NPs internalized in cells were visualized on the basis of the local increase in the contact stiffness with respect to the surrounding biological matrix. A second AFM-based technique for nanomechanical imaging, i.e., HarmoniX™, as well as magnetic force microscopy and light microscopy were used to confirm the CR-AFM results. Thus, CR-AFM was demonstrated as a promising technique for subsurface imaging of nanomaterials in biological samples.

Does 6 Hours of Contact With Alginate Impression Material Affect Dental Cast Properties?

Science.gov (United States)

Ibrahim, Amna Adam; Alhajj, Mohammed Nasser; Khalifa, Nadia; Gilada, Magdi Wadie

2017-06-01

Alginate impression (irreversible hydrocolloid) material is commonly used in dental practice because it is easy to mix, low in cost, and well tolerated by patients. The material is not dimensionally stable, however; thus, it is necessary to pour the impression immediately after the molding is accomplished, or within 60 minutes if the impression is kept in 100% humidity. Excessive contact of the alginate impression with the cast model over time may affect the model's properties. In this study, the authors tested the effect of contact time between an alginate impression and type III dental stone on cast model properties. Sixty-seven cast models were obtained from a stainless steel cylinder by using irreversible hydrocolloid impression material and type III dental stone. Thirty-seven cast models were separated from the impression after 1 hour (control group) and 30 cast models were separated after 6 hours (study group). The samples were evaluated under light microscope for surface details and measured by digital caliper for dimensional stability. An indentation on the cast was made and the depth of the indentation was then measured with a digital caliper to measure hardness. The dimensional stability of the cast models was not affected when contact time was increased from 1 hour to 6 hours (P = .507). Surface details did not deteriorate when contact time was increased, as all of the samples could reproduce all details after the 1-hour and 6-hour interval periods. However, hardness was greater after 1 hour of contact time (P = .001) than after 6 hours of contact time. In conclusion, contact between alginate impression material and type III dental stone up to 6 hours did not affect the dimensional stability and richness of the surface; hardness, though, was significantly affected.

The pellet-cladding contact in a fuel rod and its simulation by finite elements

International Nuclear Information System (INIS)

Tanajura, C.A.S.

1988-01-01

A model to analyse the mechanical behavior of a fuel rod of a PWR is presented. We drew our attention to the phenomenon of pellet-pellet and pellet-cladding contact by taking advantage of a model which assumes the hypotheses of axisymmetry, elastic behavior with infinitesimal deformations and changes of the material properties with temperature. It also includes the effects of swelling and initial relocation. The problem of contact gives rise to a variational formulation which employs Lagrangian multipliers. With this approach an iterative scheme is constructed to obtain the solution. The finite element method is applied to space discretization. The model sensibility to some parameters and its performance concerning fuel rod behavior is discussed by means of numerical simulations. (author) [pt

The importance of contact quality

DEFF Research Database (Denmark)

van Bakel, Marian; Gerritsen, Marinel; van Oudenhoven, Jan Pieter

Establishing contact between expatriates and a local host has been found to reap benefits with regard to Interaction Adjustment, Host National Social Support, Open-mindedness, and Social Initiative. This longitudinal study examines the role of the quality of contact for these four aspects....... Expatriates in the Netherlands were randomly divided into an experimental group (n = 33) of which 21 developed high-quality contact with their host, and a control group (n = 32) without host. The results show that contact quality plays an important role and suggest that the higher the quality of the contact......, the more benefit the expatriate experienced. Moreover, expatriates with low-quality contact did not experience a detrimental effect....

Busyness around the Business : a cross-national comparative research of the work-life balance of self-employed workers

NARCIS (Netherlands)

S.M. Annink (Anne)

2017-01-01

markdownabstractWorkers increasingly struggle to combine work and other responsibilities. Self-employment might be a strategy to achieve greater autonomy and work-life balance in comparison to wage employment. However, autonomy does not always offset the responsibilities and uncertainties that come

FreeContact: fast and free software for protein contact prediction from residue co-evolution.

Science.gov (United States)

Kaján, László; Hopf, Thomas A; Kalaš, Matúš; Marks, Debora S; Rost, Burkhard

2014-03-26

20 years of improved technology and growing sequences now renders residue-residue contact constraints in large protein families through correlated mutations accurate enough to drive de novo predictions of protein three-dimensional structure. The method EVfold broke new ground using mean-field Direct Coupling Analysis (EVfold-mfDCA); the method PSICOV applied a related concept by estimating a sparse inverse covariance matrix. Both methods (EVfold-mfDCA and PSICOV) are publicly available, but both require too much CPU time for interactive applications. On top, EVfold-mfDCA depends on proprietary software. Here, we present FreeContact, a fast, open source implementation of EVfold-mfDCA and PSICOV. On a test set of 140 proteins, FreeContact was almost eight times faster than PSICOV without decreasing prediction performance. The EVfold-mfDCA implementation of FreeContact was over 220 times faster than PSICOV with negligible performance decrease. EVfold-mfDCA was unavailable for testing due to its dependency on proprietary software. FreeContact is implemented as the free C++ library "libfreecontact", complete with command line tool "freecontact", as well as Perl and Python modules. All components are available as Debian packages. FreeContact supports the BioXSD format for interoperability. FreeContact provides the opportunity to compute reliable contact predictions in any environment (desktop or cloud).

Return to work with chronic pain: employers' and employees' views.

Science.gov (United States)

Wainwright, E; Wainwright, D; Keogh, E; Eccleston, C

2013-10-01

The sickness certification and return to work (RTW) of people with chronic pain are important health and economic issues for employees, employers, taxpayers and the UK government. The 'fit note' and a national educational programme promoting RTW were introduced in 2010 to curb rising rates of sickness absence. To investigate employers' and employees' experiences of managing RTW when someone has taken sick leave for chronic pain and to explore the perceived efficacy of the fit note. A qualitative study, comprising semi-structured interviews with employers who had managed sick leave cases and employees who had experienced sick leave for chronic pain. Interviews were recorded, transcribed and the data analysed using constructivist grounded theory principles. Five themes were elicited. Firstly, frequent enquiry after health status was seen as intrusive by some employees but part of good practice by employers and acknowledging this difference was useful. Secondly, being able to trust employees due to their performance track record was helpful for employers when dealing with complex chronic pain conditions. Thirdly, feeling valued increased employees' motivation to RTW. Fourthly, guidelines about maintaining contact with absent employees were useful if used flexibly. Finally, both parties valued the fit note for its positive language, interrogative format and biomedical authority. The fit note was perceived to be helpful if used in combination with other strategies for managing sick leave and RTW for people with chronic pain. These strategies may be applicable to other fluctuating, long-term conditions with medically unexplained elements.

Occupationally related contact dermatitis in North American food service workers referred for patch testing, 1994 to 2010.

Science.gov (United States)

Warshaw, Erin M; Kwon, Gina P; Mathias, C G Toby; Maibach, Howard I; Fowler, Joseph F; Belsito, Donald V; Sasseville, Denis; Zug, Kathryn A; Taylor, James S; Fransway, Anthony F; Deleo, Vincent A; Marks, James G; Pratt, Melanie D; Storrs, Frances J; Zirwas, Matthew J; Dekoven, Joel G

2013-01-01

Contact dermatoses are common in food service workers (FSWs). This study aims to (1) determine the prevalence of occupationally related contact dermatitis among FSWs patch tested by the North American Contact Dermatitis Group (NACDG) and (2) characterize responsible allergens and irritants as well as sources. Cross-sectional analysis of patients patch tested by the NACDG, 1994 to 2010, was conducted. Of 35,872 patients patch tested, 1237 (3.4%) were FSWs. Occupationally related skin disease was significantly more common in FSWs when compared with employed non-FSWs. Food service workers were significantly more likely to have hand (P contact dermatitis in FSWs were 30.6% and 54.7%, respectively. Although the final diagnosis of irritant contact dermatitis was statistically higher in FSWs as compared with non-FSWs, allergic contact dermatitis was lower in FSWs as compared with non-FSWs. The most frequent currently relevant and occupationally related allergens were thiuram mix (32.5%) and carba mix (28.9%). Gloves were the most common source of responsible allergens. The NACDG standard tray missed at least 1 occupationally related allergen in 38 patients (4.3%). Among FSWs patch tested by the NACDG between 1994 and 2010, the most common allergens were thiuram mix and carba mix. Gloves were the most common source of responsible allergens.

The Challenges Faced by Informal Traders in Greater Letaba Municipality in Limpopo Province, South Africa

Directory of Open Access Journals (Sweden)

Kole Legodi

2015-12-01

Full Text Available Informal trade has grown at an alarming rate in South Africa because of lack of employment opportunities in both the private and public sectors. This has resulted in many unemployed members of the population joining the informal business sector. The majority of people in this sector do not have skills that are needed in the formal employment sector, others are semi-literate and a small percentage has some level of qualification. Nevertheless, this sector is plagued by a number of challenges which this article presents.  The article reports on the study that was conducted at Greater Letaba Municipality in Limpopo Province. The aim of the study was to investigate the challenges that were faced by informal traders in Greater Letaba Municipality in Limpopo Province in South Africa. The area was chosen because of its accessibility to the researchers and its potential to provide relevant and accurate information for the research project. Thus, a qualitative research method was used to collect data through face to face interviews. The research discovered that some of the challenges experienced by the informal traders in the area ranged from lack of support from the local municipality to structural challenges like lack of ablution facilities and limited access to electricity. Furthermore, other challenges concerned safety and health issues that were also gender based. Most of the traders in the area were women; an element which attest to the fact that it is difficult to find employment in the country when one is less educated and is also a woman.

Prediction of contact mechanics in metal-on-metal Total Hip Replacement for parametrically comprehensive designs and loads.

Science.gov (United States)

Donaldson, Finn E; Nyman, Edward; Coburn, James C

2015-07-16

Manufacturers and investigators of Total Hip Replacement (THR) bearings require tools to predict the contact mechanics resulting from diverse design and loading parameters. This study provides contact mechanics solutions for metal-on-metal (MoM) bearings that encompass the current design space and could aid pre-clinical design optimization and evaluation. Stochastic finite element (FE) simulation was used to calculate the head-on-cup contact mechanics for five thousand combinations of design and loading parameters. FE results were used to train a Random Forest (RF) surrogate model to rapidly predict the contact patch dimensions, contact area, pressures and plastic deformations for arbitrary designs and loading. In addition to widely observed polar and edge contact, FE results included ring-polar, asymmetric-polar, and transitional categories which have previously received limited attention. Combinations of design and load parameters associated with each contact category were identified. Polar contact pressures were predicted in the range of 0-200 MPa with no permanent deformation. Edge loading (with subluxation) was associated with pressures greater than 500 MPa and induced permanent deformation in 83% of cases. Transitional-edge contact (with little subluxation) was associated with intermediate pressures and permanent deformation in most cases, indicating that, even with ideal anatomical alignment, bearings may face extreme wear challenges. Surrogate models were able to accurately predict contact mechanics 18,000 times faster than FE analyses. The developed surrogate models enable rapid prediction of MoM bearing contact mechanics across the most comprehensive range of loading and designs to date, and may be useful to those performing bearing design optimization or evaluation. Published by Elsevier Ltd.

Video Tape Application to Higher Education: Pre-Employment Screening. Final Report.

Science.gov (United States)

Millet, June E.; Smith, Lawrence H.

Significant needs and additional pressures have been imposed on those persons involved in faculty selection activities on college campuses today. The combination of greater numbers of highly qualified candidates and restricted interview budgets suggests the need for more efficient and less costly methods of employment screening. In addition,…

PREFACE: Non-contact AFM Non-contact AFM

Science.gov (United States)

Giessibl, Franz J.; Morita, Seizo

2012-02-01

This special issue is focussed on high resolution non-contact atomic force microscopy (AFM). Non-contact atomic force microscopy was established approximately 15 years ago as a tool to image conducting and insulating surfaces with atomic resolution. Since 1998, an annual international conference has taken place, and although the proceedings of these conferences are a useful source of information, several key developments warrant devoting a special issue to this subject. In the theoretic field, the possibility of supplementing established techniques such as scanning tunneling microscopy (STM) and Kelvin probe microscopy with atomically resolved force micrsoscopy poses many challenges in the calculation of contrast and contrast reversal. The surface science of insulators, self-assembled monolayers and adsorbates on insulators is a fruitful field for the application of non-contact AFM: several articles in this issue are devoted to these subjects. Atomic imaging and manipulation have been pioneered using STM, but because AFM allows the measurement of forces, AFM has had a profound impact in this field as well. Three-dimensional force spectroscopy has allowed many important insights into surface science. In this issue a combined 3D tunneling and force microscopy is introduced. Non-contact AFM typically uses frequency modulation to measure force gradients and was initially used mainly in a vacuum. As can be seen in this issue, frequency modulation is now also used in ambient conditions, allowing better spatial and force resolution. We thank all of the contributors for their time and efforts in making this special issue possible. We are also very grateful to the staff of IOP Publishing for handling the administrative aspects and for steering the refereeing process. Non-contact AFM contents Relation between the chemical force and the tunnelling current in atomic point contacts: a simple model Pavel Jelínek, Martin Ondrácek and Fernando Flores Theoretical simulation of

Lettuce contact allergy

DEFF Research Database (Denmark)

Paulsen, Evy; Andersen, Klaus E

2016-01-01

Lettuce (Lactuca sativa L.) and its varieties are important vegetable crops worldwide. They are also well-known, rarely reported, causes of contact allergy. As lettuce allergens and extracts are not commercially available, the allergy may be underdiagnosed. The aims of this article are to present...... person who is occupationally exposed to lettuce for longer periods, especially atopics, amateur gardeners, and persons keeping lettuce-eating pets, is potentially at risk of developing lettuce contact allergy.......Lettuce (Lactuca sativa L.) and its varieties are important vegetable crops worldwide. They are also well-known, rarely reported, causes of contact allergy. As lettuce allergens and extracts are not commercially available, the allergy may be underdiagnosed. The aims of this article are to present...... new data on lettuce contact allergy and review the literature. Lettuce is weakly allergenic, and occupational cases are mainly reported. Using aimed patch testing in Compositae-allergic patients, two recent Danish studies showed prevalence rates of positive lettuce reactions of 11% and 22...

Relations among Social Anxiety, Eye Contact Avoidance, State Anxiety, and Perception of Interaction Performance during a Live Conversation.

Science.gov (United States)

Howell, Ashley N; Zibulsky, Devin A; Srivastav, Akanksha; Weeks, Justin W

2016-01-01

There is building evidence that highly socially anxious (HSA) individuals frequently avoid making eye contact, which may contribute to less meaningful social interactions and maintenance of social anxiety symptoms. However, research to date is lacking in ecological validity due to the usage of either static or pre-recorded facial stimuli or subjective coding of eye contact. The current study examined the relationships among trait social anxiety, eye contact avoidance, state anxiety, and participants' self-perceptions of interaction performance during a live, four-minute conversation with a confederate via webcam, and while being covertly eye-tracked. Participants included undergraduate women who conversed with same-sex confederates. Results indicated that trait social anxiety was inversely related to eye contact duration and frequency averaged across the four minutes, and positively related to state social anxiety and negative self-ratings. In addition, greater anticipatory state anxiety was associated with reduced eye contact throughout the first minute of the conversation. Eye contact was not related to post-task state anxiety or self-perception of poor performance; although, trends emerged in which these relations may be positive for HSA individuals. The current findings provide enhanced support for the notion that eye contact avoidance is an important feature of social anxiety.

A review of micro-contact physics, materials, and failure mechanisms in direct-contact RF MEMS switches

International Nuclear Information System (INIS)

Basu, A; Adams, G G; McGruer, N E

2016-01-01

Direct contact, ohmic MEMS switches for RF applications have several advantages over other conventional switching devices. Advantages include lower insertion loss, higher isolation, and better switching figure-of-merit (cut-off frequency). The most important aspect of a direct-contact RF MEMS switch is the metal microcontact which can dictate the lifetime and reliability of the switch. Therefore, an understanding of contact reliability is essential for developing robust MEMS switches. This paper discusses and reviews the most important work done over the past couple of decades toward understanding ohmic micro-contacts. We initially discuss the contact mechanics and multi-physics models for studying Hertzian and multi-asperity contacts. We follow this with a discussion on models and experiments for studying adhesion. We then discuss experimental setups and the development of contact test stations by various groups for accelerated testing of microcontacts, as well as for analysis of contact reliability issues. Subsequently, we analyze a number of material transfer mechanisms in microcontacts under hot and cold switching conditions. We finally review the material properties that can help determine the selection of contact materials. A trade-off between contact resistance and high reliability is almost always necessary during selection of contact material; this paper discusses how the choice of materials can help address such trade-offs. (paper)

Busyness around the Business : a cross-national comparative research of the work-life balance of self-employed workers

OpenAIRE

Annink, Anne

2017-01-01

markdownabstractWorkers increasingly struggle to combine work and other responsibilities. Self-employment might be a strategy to achieve greater autonomy and work-life balance in comparison to wage employment. However, autonomy does not always offset the responsibilities and uncertainties that come with self-employment. This PhD dissertation shows that different types of self-employed have different work-life balance experiences. It explains how these experiences are influenced by work and bu...

The effects of indirect intergroup contact on willingness to engage in direct contact with former adversary

Czech Academy of Sciences Publication Activity Database

Voca, S.; Graf, Sylvie

2018-01-01

Roč. 12, č. 1 (2018), s. 47-57 ISSN 2309-3455 R&D Projects: GA ČR(CZ) GA17-14387S Institutional support: RVO:68081740 Keywords : positive intergroup contact * negative intergroup contact * extended intergroup contact * mass-mediated intergroup contact * willingness to engage in intergroup contact * empathy * outgroup trust Subject RIV: AN - Psychology OBOR OECD: Psychology (including human - machine relations)

Effect of contact deformation on contact electrification: a first-principles calculation

International Nuclear Information System (INIS)

Zhang, Yuanyue; Shao, Tianmin

2013-01-01

The effect of contact deformation on contact electrification of metallic materials was studied by the first-principles method. The results of charge population and the densities of states of the deformed contact models demonstrated that the magnitude of the transferred charge increased with deformation. The mechanism of the effect of deformation was investigated by studying the electronic properties of the deformed surface slabs. The results showed that crystal deformation led to a change in the electrostatic potential of the metal, where the number of nearly free electrons and unoccupied orbitals for charge transfer increased, and their energy barrier decreased. (paper)

Transfer characteristics and contact resistance in Ni- and Ti-contacted graphene-based field-effect transistors

International Nuclear Information System (INIS)

Di Bartolomeo, A; Giubileo, F; Iemmo, L; Romeo, F; Santandrea, S; Gambardella, U

2013-01-01

We produced graphene-based field-effect transistors by contacting mono- and bi-layer graphene by sputtering Ni or Ti as metal electrodes. We performed electrical characterization of the devices by measuring their transfer and output characteristics. We clearly observed the presence of a double-dip feature in the conductance curve for Ni-contacted transistors, and we explain it in terms of charge transfer and graphene doping under the metal contacts. We also studied the contact resistance between the graphene and the metal electrodes with larger values of ∼30 kΩμm 2 recorded for Ti contacts. Importantly, we prove that the contact resistance is modulated by the back-gate voltage. (paper)

Intervention impact on depression product appraisal and purchasing behavior by employers: a randomized trial.

Science.gov (United States)

Rost, Kathryn M; Marshall, Donna; Xu, Stanley

2014-09-24

Employers can purchase high quality depression products that provide the type, intensity and duration of depression care management shown to improve work outcomes sufficiently for many employers to achieve a return on investment. The purpose of this randomized controlled trial was to test an intervention to encourage employers to purchase a high quality depression product for their workforce. Twenty nine organizations recruited senior health benefit professional members representing public or private employers who had not yet purchased a depression product for all 100+ workers in their company. The research team used randomization blocked by company size to assign eligible employers to: (1) a presentation encouraging employers to purchase a high quality depression product accompanied by a scientifically-derived return on investment estimate, or (2) a presentation encouraging employers to work with their most subscribed health plan to improve depression treatment quality indicators. Two hundred ninety three employers (82.3% of 356) completed baseline data immediately before learning that 140 employers had been randomized to the evidence-based (EB) depression product presentation and 153 had been randomized to the usual care (UC) depression treatment quality indicator presentation. Analysis of 250 (85.3% of 293) employers who completed web-based interviews at 12 and/or 24 months was conducted to determine presentation impact on depression product appraisal and purchasing behavior. The intervention had no impact on depression product appraisal in 232 subjects (F = 2.36, p = .07) or depression product purchasing (chisquare = 1.82, p = .44) in 250 subjects. Depression product appraisal increased in companies with greater health benefit generosity whose benefit professionals were male. Depression product purchasing behavior increased in small companies compared to large companies, companies who knew a vendor that sold depression products at baseline, companies with

Sciences & Nature: Contact

African Journals Online (AJOL)

Principal Contact. Ehouan Etienne Ehile Professor University of Abobo-Adjamé 02 BP 801 Abidjan 02. Phone: (+225) 2030 4201. Fax: (+225) 2030 4203. Email: eh_ehile@yahoo.fr. Support Contact. Irie Zoro Bi Email: banhiakalou@yahoo.fr. ISSN: 1812-0741. AJOL African Journals Online. HOW TO USE AJOL.

Head-disk interface nanotribology for Tbit/inch2 recording densities: near-contact and contact recording

Science.gov (United States)

Vakis, Antonis I.; Polycarpou, Andreas A.

2010-06-01

In the effort to achieve Tbit/inch2 recording densities, thermal fly-height control (TFC) nanotechnology was developed to effectively reduce the clearance (which is of the order of a few nanometres) at the head-disk interface (HDI) of hard-disk drives. In this work, we present a model of the HDI that can predict the dynamic flying and nanotribological contacting behaviour, allowing for accurate predictions and characterization of the operating regime as a function of TFC actuation. A geometric model for TFC is presented and an improved definition of contact at the interface is developed in the presence of nanoscale topographical roughness and dynamic microwaviness. A new methodology is proposed for the calculation of the nominal area of contact, which affects both near- and at-contact behaviour, while the stiffening of the air bearing force with TFC actuation is also accounted for. Slider behaviour is analysed by quantifying the approach, jump-to-contact, lubricant and solid contact regimes of operation and identifying the critical and optimum TFC actuations. The feasibility of near-contact, light molecularly thin lubricant contact versus solid contact recording is explored under the effect of the interfacial forces and stresses present at the HDI. The clearance and the state of vibrations are analysed and design guidelines are proposed for improved performance.

Head-disk interface nanotribology for Tbit/inch2 recording densities: near-contact and contact recording

International Nuclear Information System (INIS)

Vakis, Antonis I; Polycarpou, Andreas A

2010-01-01

In the effort to achieve Tbit/inch 2 recording densities, thermal fly-height control (TFC) nanotechnology was developed to effectively reduce the clearance (which is of the order of a few nanometres) at the head-disk interface (HDI) of hard-disk drives. In this work, we present a model of the HDI that can predict the dynamic flying and nanotribological contacting behaviour, allowing for accurate predictions and characterization of the operating regime as a function of TFC actuation. A geometric model for TFC is presented and an improved definition of contact at the interface is developed in the presence of nanoscale topographical roughness and dynamic microwaviness. A new methodology is proposed for the calculation of the nominal area of contact, which affects both near- and at-contact behaviour, while the stiffening of the air bearing force with TFC actuation is also accounted for. Slider behaviour is analysed by quantifying the approach, jump-to-contact, lubricant and solid contact regimes of operation and identifying the critical and optimum TFC actuations. The feasibility of near-contact, light molecularly thin lubricant contact versus solid contact recording is explored under the effect of the interfacial forces and stresses present at the HDI. The clearance and the state of vibrations are analysed and design guidelines are proposed for improved performance.

Explaining individual- and country-level variations in unregistered employment using a multi-level model: evidence from 35 Eurasian countries

Directory of Open Access Journals (Sweden)

Krasniqi Besnik A.

2017-12-01

Full Text Available The aim of this paper is to evaluate the individual- and country-level variations in unregistered employment. To analyse whether it is marginalised groups who are more likely to engage in unregistered employment and explain the country-level variations, a 2010 Life in Transition Survey (LiTS involving 38,864 interviews in 35 Eurasian countries is reported. Multilevel logistic regression analysis reveals that younger age groups, the divorced, and those with fewer years in education, are more likely to be unregistered employed. On a country-level, meanwhile, the prevalence of unregistered employment is strongly associated with tax morale; the greater the asymmetry between informal and formal institutions, the greater is the prevalence of unregistered employment. It is also higher when GDP per capita as well as social distribution and state intervention (subsidies and transfers, social contribution expenditure, health expenditure are lower. The paper concludes by discussing the theoretical and policy implications.

Elastic contact mechanics: percolation of the contact area and fluid squeeze-out.

Science.gov (United States)

Persson, B N J; Prodanov, N; Krick, B A; Rodriguez, N; Mulakaluri, N; Sawyer, W G; Mangiagalli, P

2012-01-01

The dynamics of fluid flow at the interface between elastic solids with rough surfaces depends sensitively on the area of real contact, in particular close to the percolation threshold, where an irregular network of narrow flow channels prevails. In this paper, numerical simulation and experimental results for the contact between elastic solids with isotropic and anisotropic surface roughness are compared with the predictions of a theory based on the Persson contact mechanics theory and the Bruggeman effective medium theory. The theory predictions are in good agreement with the experimental and numerical simulation results and the (small) deviation can be understood as a finite-size effect. The fluid squeeze-out at the interface between elastic solids with randomly rough surfaces is studied. We present results for such high contact pressures that the area of real contact percolates, giving rise to sealed-off domains with pressurized fluid at the interface. The theoretical predictions are compared to experimental data for a simple model system (a rubber block squeezed against a flat glass plate), and for prefilled syringes, where the rubber plunger stopper is lubricated by a high-viscosity silicon oil to ensure functionality of the delivery device. For the latter system we compare the breakloose (or static) friction, as a function of the time of stationary contact, to the theory prediction.

Mapping the Articular Contact Area of the Long Head of the Biceps Tendon on the Humeral Head

Directory of Open Access Journals (Sweden)

Brent J. Morris

2014-01-01

Full Text Available The purpose of this investigation was to calculate the contact surface area of the long head of the biceps (LHB in neutral position and abduction. We sought to determine whether the LHB articulates with the humeral head in a consistent pattern comparing articular contact area in neutral position and abduction. Eleven fresh frozen matched cadaveric shoulders were analyzed. The path of the biceps tendon on the articular surface of the humeral head and the total articular surface were digitized using a MicronTracker 2 H3-60 three-dimensional optical tracker. Contact surface area was significantly less in abduction than in neutral position (P=0.002 with a median ratio of 41% (36%, 47.5%. Ratios of contact area in neutral position to full articular surface area were consistent between left and right shoulders (rho=1, P=0.017 as were ratios of abduction area to full articular surface area (rho= 0.97, P=0.005. The articular contact surface area is significantly greater in neutral position than abduction. The ratios of articular contact surface areas to total humeral articular surface areas have a narrow range and are consistent between left and right shoulders of the same cadaver.

Contact Us | DOepatents

Science.gov (United States)

advance. Your help is appreciated. Contact us by email Email doepatentscomments@osti.gov NOTE: Email us by phone Phone Phone (865) 241-5275 Contact us in writing Mail U.S. Department of Energy Office of non-federal websites. Their policies may differ from this site. Javascript Not Enabled Email Link

Greater happiness for a greater number: Is that possible? If so how? (Arabic)

NARCIS (Netherlands)

R. Veenhoven (Ruut); E. Samuel (Emad)

2012-01-01

textabstractWhat is the final goal of public policy? Jeremy Bentham (1789) would say: greater happiness for a greater number. He thought of happiness as subjective enjoyment of life; in his words as “the sum of pleasures and pains”. In his time, the happiness of the great number could not be

Measurement of metal/carbon nanotube contact resistance by adjusting contact length using laser ablation

Energy Technology Data Exchange (ETDEWEB)

Lan Chun; Srisungsitthisunti, Pornsak; Amama, Placidus B; Fisher, Timothy S; Xu Xianfan; Reifenberger, Ronald G [Birck Nanotechnology Center, Purdue University, West Lafayette, IN 47907 (United States)], E-mail: lan0@physics.purdue.edu

2008-03-26

A technique of measuring contact resistance between an individual nanotube and a deposited metallic film is described. Using laser ablation to sequentially shorten the contact length between a nanotube and the evaporated metallic film, the linear resistivity of the nanotube as well as the specific contact resistivity between the nanotube and metallic film can be determined. This technique can be generally used to measure the specific contact resistance that develops between a metallic film and a variety of different nanowires and nanotubes.

Service contacts prior to death in people dying by suicide in the Scottish Highlands.

Science.gov (United States)

Stark, Cameron R; Vaughan, Susan; Huc, Sara; O'Neill, Noelle

2012-01-01

Many people who die by suicide have been in contact with health services prior to their death. This study examined service contacts in people in urban and rural areas of the Scottish Highlands. Highland residents dying by suicide or undetermined intent in 2001-2004 were identified using routine death records. Health service databases were searched to identify general hospital, mental health and general practice notes. 177 residents died in the time period (136 males). At least one type of record was identified on 175 people, including general practice records (167 people, 94.4%), psychiatric hospital records (n=87, 49.2%) and general hospital records (n=142, 80.2%). Of these, 52.5% had been in contact with at least one health service in the month before their death, including 18.6% with mental health services, and 46.4% with general practice. In total, 68.9% had a previous diagnosis of mental illness, 52.5% of substance misuse problems, and 40.1% of self-harm. The commonest mental illness diagnosis was depression (n=97, 54.8%). There was no difference in rates of GP contact in rural and urban areas. Of those dying in urban areas, 32% had been in contact with mental health services in the previous month, compared with 21% in Accessible Rural/Accessible Small Towns, and 11% in Remote Rural/Remote Small Towns (prural areas were less likely to have had contact with mental health services in the year before their death (prural than urban areas, and this finding increased with greater rurality.

Introduction to contact mechanics

CERN Document Server

Fischer-Cripps, Anthony C

2000-01-01

Contact mechanics deals with the elastic or plastic contact between two solid objects, and is thus intimately connected with such topics as fracture, hardness, and elasticity.This text, intended for advanced undergraduates, begins with an introduction to the mechanical properties of materials, general fracture mechanics, and fractures in brittle solids.This is followed by a detailed discussion of stresses and the nature of elastic and elastic-plastic contact.

Solar cell with back side contacts

Science.gov (United States)

Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J; Wanlass, Mark Woodbury; Clews, Peggy J

2013-12-24

A III-V solar cell is described herein that includes all back side contacts. Additionally, the positive and negative electrical contacts contact compoud semiconductor layers of the solar cell other than the absorbing layer of the solar cell. That is, the positive and negative electrical contacts contact passivating layers of the solar cell.

Occupational issues of allergic contact dermatitis

DEFF Research Database (Denmark)

Andersen, Klaus E

2003-01-01

Occupational contact dermatitis is often of multifactorial origin, and it is difficult to determine the relative significance of the various contributing factors. Contact allergies are relevant in 20-50% of recognised occupational contact dermatitis cases. The reported frequency in different...... of the reported contact allergies is often uncertain. Many occupational contact dermatitis patients with documented contact allergies develop chronic eczema, in spite of work changes and attempted allergen avoidance. Recognition/non-recognition of a notified case may be based on circumstantial evidence, because......-effect relationships to be established with increased certainty. For prevention of allergic contact dermatitis it was a major step forward, with mandatory ingredient labelling of cosmetic products. However, improved labelling of the presence of contact allergens in household and industrial products is needed...

Dynamic Analysis of Rotor Systems Considering Ball Bearing Contact Mechanism

International Nuclear Information System (INIS)

Kim, Youngjin; Lee, Jongmahn; Oh, Dongho

2013-01-01

We propose a finite element modeling method considering the ball bearing contact mechanism, and the developed method was verified through experimental and analytical results of inner and outer race-type rotor systems. A comparison of the proposed method with conventional method reveals that there is little difference in the results of the inner race-type rotor system, but there are considerable differences in the results of the outer race-type rotor system such that predictions of greater accuracy can be made. Therefore, the proposed method can be used for accurately predicting the dynamic characteristics of an outer race-type rotary machine

Employment status and mental health care use in times of economic contraction: a repeated cross-sectional study in Europe, using a three-level model.

Science.gov (United States)

Buffel, Veerle; van de Straat, Vera; Bracke, Piet

2015-03-11

Framed within the recent economic crisis, in this study we investigate the medical mental health care use of the unemployed compared with that of the employed in Europe, and whether the relationship between employment status and mental health care use varies across macro-economic conditions. We examine whether the macro-economic context and changes therein are related to mental health care use, via their impact on mental health, or more directly, irrespective of mental health. We use data from three waves of the Eurobarometer (2002, 2005/2006, and 2010), which has a repeated cross-sectional and cross-national design. Linear and logistic multilevel regression analyses are performed with mental health, contacting a general practitioner, and contacting a psychiatrist for mental health problems as dependent variables. The multilevel design has three levels (the individual, the period-country, and the country), which allows us to estimate both longitudinal and cross-sectional macro-effects. The macro-economic context and changes therein are assessed using national unemployment rates and growth rates in Gross Domestic Product (GDP). The mean unemployment rate is negatively related to mental health, although for women, this effect only applies to the employed. Among women, no relationship is found between changes in the macro-economic context and mental health. The unemployment rate, and changes in both the unemployment rate and the real GDP growth rate, are associated with men's care use, regardless of their mental health, whereas this does not hold for women. In countries with an increase in the unemployment rate, both unemployed and employed men tend to medicalize their problems more by contacting a general practitioner, irrespective of their mental health, while the likelihood of contacting a psychiatrist is lower among employed men. Our findings stress the importance of taking the macro-economic context and changes therein into account when studying the mental health

A Comparison of Cognitive Function in Former Rugby Union Players Compared with Former Non-Contact-Sport Players and the Impact of Concussion History.

Science.gov (United States)

Hume, Patria A; Theadom, Alice; Lewis, Gwyn N; Quarrie, Kenneth L; Brown, Scott R; Hill, Rosamund; Marshall, Stephen W

2017-06-01

This study investigated differences in cognitive function between former rugby and non-contact-sport players, and assessed the association between concussion history and cognitive function. Overall, 366 former players (mean ± standard deviation [SD] age 43.3 ± 8.2 years) were recruited from October 2012 to April 2014. Engagement in sport, general health, sports injuries and concussion history, and demographic information were obtained from an online self-report questionnaire. Cognitive functioning was assessed using the online CNS Vital Signs neuropsychological test battery. Cohen's d effect size statistics were calculated for comparisons across player groups, concussion groups (one or more self-reported concussions versus no concussions) and between those groups with CNS Vital Signs age-matched norms (US norms). Individual differences within groups were represented as SDs. The elite-rugby group (n = 103) performed worse on tests of complex attention, processing speed, executive functioning, and cognitive flexibility than the non-contact-sport group (n = 65), and worse than the community-rugby group (n = 193) on complex attention. The community-rugby group performed worse than the non-contact group on executive functioning and cognitive flexibility. Compared with US norms, all three former player groups performed worse on verbal memory and reaction time; rugby groups performed worse on processing speed, cognitive flexibility and executive functioning; and the community-rugby group performed worse on composite memory. The community-rugby group and non-contact-sport group performed slightly better than US norms on complex attention, as did the elite-rugby group for motor speed. All three player groups had greater individual differences than US norms on composite memory, verbal memory and reaction time. The elite-rugby group had greater individual differences on processing speed and complex attention, and the community-rugby group had greater individual

ALLERGIC CONTACT DERMATITIS

Directory of Open Access Journals (Sweden)

Trisna Yuliharti Tersinanda

2013-07-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Allergic contact dermatitis is an immunologic reaction that tends to involve the surrounding skin and may even spread beyond affected sites. This skin disease is one of the more frequent, and costly dermatologic problems. Recent data from United Kingdom and United States suggest that the percentage of occupational contact dermatitis due to allergy may be much higher, thus raising the economic impact of occupational allergic contact dermatitis. There is not enough data about the epidemiology of allergic contact dermatitis in Indonesia, however based on research that include beautician in Denpasar, about 27,6 percent had side effect of cosmetics, which is 25,4 percent of it manifested as allergic contact dermatitis. Diagnosis of allergic contact dermatitis is based on anamnesis, physical examination, patch test, and this disease should be distinguished from other eczematous skin disease. The management is prevention of allergen exposure, symptomatic treatment, and physicochemical barrier /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Eye contact with neutral and smiling faces: effects on frontal EEG asymmetry and autonomic responses

Directory of Open Access Journals (Sweden)

Laura Maria Pönkänen

2012-05-01

Full Text Available In our previous studies we have shown that seeing another person live with a direct vs. averted gaze results in greater relative left-sided frontal asymmetry in the electroencephalography (EEG, associated with approach motivation, and in enhanced skin conductance responses indicating autonomic arousal. In our studies, however, the stimulus persons had a neutral expression. In real-life social interaction, eye contact is often associated with a smile, which is another signal of the sender’s approach-related motivation. A smile could therefore enhance the affective-motivational responses to eye contact. In the present study, we investigated whether the facial expression (neutral vs. smile would modulate the frontal EEG asymmetry and autonomic arousal to seeing a direct vs. an averted gaze in faces presented live through a liquid crystal shutter. The results showed that the skin conductance responses were greater for the direct than the averted gaze and that the effect of gaze direction was more pronounced for a smiling than a neutral face. However, the frontal EEG asymmetry results revealed a more complex pattern. Participants whose responses to seeing the other person were overall indicative of leftward frontal activity (indicative of approach showed greater relative left-sided asymmetry for the direct vs. averted gaze, whereas participants whose responses were overall indicative of rightward frontal activity (indicative of avoidance showed greater relative right-sided asymmetry to direct vs. averted gaze. The other person’s facial expression did not have an effect on the frontal EEG asymmetry. These findings may reflect that another’s direct gaze, as compared to their smile, has a more dominant role in regulating perceivers’ approach motivation.

Time domain contact model for tyre/road interaction including nonlinear contact stiffness due to small-scale roughness

Science.gov (United States)

Andersson, P. B. U.; Kropp, W.

2008-11-01

Rolling resistance, traction, wear, excitation of vibrations, and noise generation are all attributes to consider in optimisation of the interaction between automotive tyres and wearing courses of roads. The key to understand and describe the interaction is to include a wide range of length scales in the description of the contact geometry. This means including scales on the order of micrometres that have been neglected in previous tyre/road interaction models. A time domain contact model for the tyre/road interaction that includes interfacial details is presented. The contact geometry is discretised into multiple elements forming pairs of matching points. The dynamic response of the tyre is calculated by convolving the contact forces with pre-calculated Green's functions. The smaller-length scales are included by using constitutive interfacial relations, i.e. by using nonlinear contact springs, for each pair of contact elements. The method is presented for normal (out-of-plane) contact and a method for assessing the stiffness of the nonlinear springs based on detailed geometry and elastic data of the tread is suggested. The governing equations of the nonlinear contact problem are solved with the Newton-Raphson iterative scheme. Relations between force, indentation, and contact stiffness are calculated for a single tread block in contact with a road surface. The calculated results have the same character as results from measurements found in literature. Comparison to traditional contact formulations shows that the effect of the small-scale roughness is large; the contact stiffness is only up to half of the stiffness that would result if contact is made over the whole element directly to the bulk of the tread. It is concluded that the suggested contact formulation is a suitable model to include more details of the contact interface. Further, the presented result for the tread block in contact with the road is a suitable input for a global tyre/road interaction model

An innovative wheel–rail contact model for railway vehicles under degraded adhesion conditions

International Nuclear Information System (INIS)

Meli, E.; Ridolfi, A.

2015-01-01

The accurate modelling of the wheel–rail contact plays a fundamental role in the railway field since the contact forces heavily affect the vehicle dynamics, the wear of the contact surfaces and the vehicle safety. Concerning the wheel–rail contact, an important open problem is represented by the degraded adhesion. A realistic adhesion model is quite difficult to obtain because of the complex and highly non-linear behaviour of the adhesion coefficient and the presence of external unknown contaminants (the third body); this is especially true when degraded adhesion and large sliding between the wheel and rail contact surfaces occur.In this work the authors present an adhesion model particularly developed to describe degraded adhesion conditions. The new approach will have to be suitable to be employed within the wheel–rail contact models typical of the multibody applications. In other words, the contact model, comprising the new adhesion model, will have to guarantee a good accuracy and, at the same time, a high numerical efficiency to be implemented directly online inside the general multibody model of the vehicles (e.g. in Matlab-Simulink or Simpack environments) ( www.mathworks.com http://www.mathworks.com , 2012; www.simpack.com http://www.simpack.com , 2012).The model analysed in the paper is based on some of the main phenomena characterising the degraded adhesion, such as large sliding at the contact interface, high energy dissipation, the consequent cleaning effect on the contact surfaces and the final adhesion recovery due to the removal of external unknown contaminants.The adhesion model has been validated because of the experimental data provided by Trenitalia S.p.A. coming from on-track tests performed in Velim (Czech Republic). The tests have been carried out on a straight railway track under degraded adhesion conditions with the railway vehicle UIC-Z1 equipped with a fully-working Wheel Slide Protection (WSP) system.The validation highlighted the

An innovative wheel–rail contact model for railway vehicles under degraded adhesion conditions

Energy Technology Data Exchange (ETDEWEB)

Meli, E., E-mail: enrico.meli@unifi.it; Ridolfi, A., E-mail: a.ridolfi@unifi.it [University of Florence, Department of Industrial Engineering (Italy)

2015-03-15

The accurate modelling of the wheel–rail contact plays a fundamental role in the railway field since the contact forces heavily affect the vehicle dynamics, the wear of the contact surfaces and the vehicle safety. Concerning the wheel–rail contact, an important open problem is represented by the degraded adhesion. A realistic adhesion model is quite difficult to obtain because of the complex and highly non-linear behaviour of the adhesion coefficient and the presence of external unknown contaminants (the third body); this is especially true when degraded adhesion and large sliding between the wheel and rail contact surfaces occur.In this work the authors present an adhesion model particularly developed to describe degraded adhesion conditions. The new approach will have to be suitable to be employed within the wheel–rail contact models typical of the multibody applications. In other words, the contact model, comprising the new adhesion model, will have to guarantee a good accuracy and, at the same time, a high numerical efficiency to be implemented directly online inside the general multibody model of the vehicles (e.g. in Matlab-Simulink or Simpack environments) ( www.mathworks.com http://www.mathworks.com , 2012; www.simpack.com http://www.simpack.com , 2012).The model analysed in the paper is based on some of the main phenomena characterising the degraded adhesion, such as large sliding at the contact interface, high energy dissipation, the consequent cleaning effect on the contact surfaces and the final adhesion recovery due to the removal of external unknown contaminants.The adhesion model has been validated because of the experimental data provided by Trenitalia S.p.A. coming from on-track tests performed in Velim (Czech Republic). The tests have been carried out on a straight railway track under degraded adhesion conditions with the railway vehicle UIC-Z1 equipped with a fully-working Wheel Slide Protection (WSP) system.The validation highlighted the

Contact mechanics at nanometric scale using nanoindentation technique for brittle and ductile materials.

Science.gov (United States)

Roa, J J; Rayon, E; Morales, M; Segarra, M

2012-06-01

In the last years, Nanoindentation or Instrumented Indentation Technique has become a powerful tool to study the mechanical properties at micro/nanometric scale (commonly known as hardness, elastic modulus and the stress-strain curve). In this review, the different contact mechanisms (elastic and elasto-plastic) are discussed, the recent patents for each mechanism (elastic and elasto-plastic) are summarized in detail, and the basic equations employed to know the mechanical behaviour for brittle and ductile materials are described.

Tungsten silicide contacts to polycrystalline silicon and silicon-germanium alloys

International Nuclear Information System (INIS)

Srinivasan, G.; Bain, M.F.; Bhattacharyya, S.; Baine, P.; Armstrong, B.M.; Gamble, H.S.; McNeill, D.W.

2004-01-01

Silicon-germanium alloy layers will be employed in the source-drain engineering of future MOS transistors. The use of this technology offers advantages in reducing series resistance and decreasing junction depth resulting in reduction in punch-through and SCE problems. The contact resistance of metal or metal silicides to the raised source-drain material is a serious issue at sub-micron dimensions and must be minimised. In this work, tungsten silicide produced by chemical vapour deposition has been investigated as a contact metallization scheme to both boron and phosphorus doped polycrystalline Si 1- x Ge x , with 0 ≤x ≤ 0.3. Cross bridge Kelvin resistor (CKBR) structures were fabricated incorporating CVD WSi 2 and polycrystalline SiGe. Tungsten silicide contacts to control polysilicon CKBR structures have been shown to be of high quality with specific contact resistance ρ c values 3 x 10 -7 ohm cm 2 and 6 x 10 -7 ohm cm 2 obtained to boron and phosphorus implanted samples respectively. The SiGe CKBR structures show that the inclusion of Ge yields a reduction in ρ c for both dopant types. The boron doped SiGe exhibits a reduction in ρ c from 3 x 10 -7 to 5 x 10 -8 ohm cm 2 as Ge fraction is increased from 0 to 0.3. The reduction in ρ c has been shown to be due to (i) the lowering of the tungsten silicide Schottky barrier height to p-type SiGe resulting from the energy band gap reduction, and (ii) increased activation of the implanted boron with increased Ge fraction. The phosphorus implanted samples show less sensitivity of ρ c to Ge fraction with a lowest value in this work of 3 x 10 -7 ohm cm 2 for a Ge fraction of 0.3. The reduction in specific contact resistance to the phosphorus implanted samples has been shown to be due to increased dopant activation alone

Employer, insurance, and health system response to long-term sick leave in the public sector: policy implications.

Science.gov (United States)

Heijbel, Bodil; Josephson, Malin; Jensen, Irene; Vingård, Eva

2005-06-01

This study has been conducted to describe the situation of long-term sick-listed persons employed in the public sector regarding the medical reasons of their sick leave, the duration of their problems, the duration of the actual sick leave, rehabilitation support, rehabilitation measures, and the persons expectations of the future. Response rate of a postal questionnaire, where 484 women and 51 men on long-term sick leave answered, was 69%. The study-group consisted of 90% women with a median age of 50 years. The most common reasons for sick listing were long-lasting musculoskeletal problems, especially neck/shoulder pain, low back pain and osteoarthritis or other joint problems and mental problems, especially depression and burn-out syndromes. Forty-seven procent of the men and 57% of the women had been on the sick list for more than a year. Only half of them had been subjected to the legally required rehabilitation investigation of the employer This half got access to rehabilitation programs and/or vocational rehabilitation to a greater extent than those who not had been subjected to rehabilitation investigation. Less than half had been in contact with the workplace-connected rehabilitation actors, the Occupational Health Service or the Trade Union. In spite of this the sick-listed persons had a positive view of their future return to work. For long-term sick-listed persons in the public sector, there is a great potential for improvements of the rehabilitation at the workplace arena, in the involvement and cooperation between the already existing rehabilitation actors, in order to promote return to work.

Breast cancer in female radium dial workers first employed before 1930

International Nuclear Information System (INIS)

Adams, E.E.; Brues, A.M.

1980-01-01

Female radium dial workers first employed before 1930 were analyzed for breast cancer mortality and incidence using method and rate tables described by Monson and the Mantel-Haenszel summary chi-square test for significance. Of 1180 located women, 736 were measured to estimate radium intake. This measured group was analyzed for breast cancer mortality and incidence according to four possible risk factors: radium intake dose, duration of employment, age at first exposure, and parity. The measured women showed a significant excess of breast cancer incidence and mortality only among those women with a radium intake of 50 μCi or greater

Promoting intergroup contact by changing beliefs: group malleability, intergroup anxiety, and contact motivation.

Science.gov (United States)

Halperin, Eran; Crisp, Richard J; Husnu, Shenel; Trzesniewski, Kali H; Dweck, Carol S; Gross, James J

2012-12-01

Intergroup contact plays a crucial role in moderating long-term conflicts. Unfortunately, the motivation to make contact with outgroup members is usually very low in such conflicts. We hypothesized that one limiting factor is the belief that groups cannot change, which leads to increased intergroup anxiety and decreased contact motivation. To test this hypothesis, we experimentally manipulated beliefs about group malleability in the context of the conflict between Greek and Turkish Cypriots and then assessed intergroup anxiety and motivation to engage in intergroup contact. Turkish Cypriots who were led to believe that groups can change (with no mention of the specific groups involved) reported lower levels of intergroup anxiety and higher motivation to interact and communicate with Greek Cypriots in the future, compared with those who were led to believe that groups cannot change. This effect of group malleability manipulation on contact motivation was mediated by intergroup anxiety. PsycINFO Database Record (c) 2012 APA, all rights reserved.

Hybrid configurations of leadership in higher education employer engagement

OpenAIRE

Bolden, R.; Petrov, G.

2014-01-01

Recent literature has emphasised the distributed nature of leadership in higher education and the multitude of actors and factors that contribute towards organisational outcomes. Gronn (2009, 2011) suggests, however, that rather than using such evidence to provide broad, normative accounts of leadership practice, greater attention should be directed to mapping the ‘hybrid configurations’ through which leadership practice emerges. This paper responds to this call through an analysis of employe...

Contact Allergy in Danish Healthcare Workers

DEFF Research Database (Denmark)

Schwensen, Jakob F; Menné, Torkil; Sommerlund, Mette

2016-01-01

Contact dermatitis in healthcare workers is a pan-European problem. We conducted a retrospective observational study of the patch-test results of 1402 healthcare workers and 1402 matched controls with contact dermatitis who were treated at 3 hospitals departments in Denmark between 2007 and 2014....... The primary objective was to determine whether healthcare work was associated with contact allergy to thiuram mix. Unadjusted univariate analyses revealed that healthcare work was significantly associated with occupational contact dermatitis and hand dermatitis. Contact allergy to thiuram mix was more common...... in healthcare workers was significantly associated with having occupational contact dermatitis, hand dermatitis and older age. In conclusion, we report here a potential problem of contact allergy to thiurams in healthcare workers with contact dermatitis. Legislative authorities may in the future focus...

Epidemiological aspects of centipede (Scolopendromorphae: Chilopoda bites registered in Greater S. Paulo, SP, Brazil

Directory of Open Access Journals (Sweden)

Irene Knysak

1998-12-01

Full Text Available INTRODUCTION: The lack of basic knowledge on venomous arthropods and the benignity of the clinical manifestations contribute to the centipede bite victims' not being taken to a treatment reference center, leading to underestimation of the number of cases and minimizing the possibility of a broader epidemiological view. An inventory of the centipede bite occurrences in Greater S. Paulo, Brazil, and the therapeutic methods employed, by the main Brazilian medical center for the notification of poisoning by venomous animals, is presented. METHOD: All patient cards of the period 1980-1989 have been checked as to place, month and time of occurrence; sex, age, affected part of the body, signs and symptoms have been observed, as well as the therapeutic methods employed. The centipedes that caused the accidents were identified at the Arthropods Laboratory. RESULTS: It was registered 216 accidents, with a 69% predominance of the Greater S. Paulo and in only 63% of the cases (136 was the agent brought in by the victim for identification. The genera most frequently represented were Cryptops (58%, Otostigmus (33% and Scolopendra (4%. Of the 136 cases, 87% showed erythema, edema, hemorrhage, burns, cephalalgia, and intense pain. There was a predominance of accidents in the warm rainy season, in the morning and for females between 21 and 60 years of age. Hands and feet were the parts of the body most affected. The benign evolution of the clinical picture (54% made therapeutical treatment unnecessary. Only the victims of Scolopendra and Otostigmus (46% were medicated with anesthetics (51%, analgesics (25%, antihistamines and cortisone (24%. CONCLUSION: The reproductive period of the centipedes, associated with their sinanthropic habits, contributes to the greater incidence of accidents in urban areas in the warm rainy season. Only patients bitten by Scolopendra and Otostigmus require therapeutical treatment.

Effect of the meniscus contact angle during early regimes of spontaneous imbibition in nanochannels.

Science.gov (United States)

Karna, Nabin Kumar; Oyarzua, Elton; Walther, Jens H; Zambrano, Harvey A

2016-11-30

Nanoscale capillarity has been extensively investigated; nevertheless, many fundamental questions remain open. In spontaneous imbibition, the classical Lucas-Washburn equation predicts a singularity as the fluid enters the channel consisting of an anomalous infinite velocity of the capillary meniscus. Bosanquet's equation overcomes this problem by taking into account fluid inertia predicting an initial imbibition regime with constant velocity. Nevertheless, the initial constant velocity as predicted by Bosanquet's equation is much greater than those observed experimentally. In the present study, large scale atomistic simulations are conducted to investigate capillary imbibition of water in slit silica nanochannels with heights between 4 and 18 nm. We find that the meniscus contact angle remains constant during the inertial regime and its value depends on the height of the channel. We also find that the meniscus velocity computed at the channel entrance is related to the particular value of the meniscus contact angle. Moreover, during the subsequent visco-inertial regime, as the influence of viscosity increases, the meniscus contact angle is found to be time dependent for all the channels under study. Furthermore, we propose an expression for the time evolution of the dynamic contact angle in nanochannels which, when incorporated into Bosanquet's equation, satisfactorily explains the initial capillary rise.

A garlic extract protects from ultraviolet B (280-320 nm) radiation-induced suppression of contact hypersensitivity

International Nuclear Information System (INIS)

Reeve, V.E.; Bosnic, M.; Rozinova, E.; Boehm-Wilcox, C.

1993-01-01

Lyophilized aged garlic extract has been incorporated at concentrations of 0.1%, 1% and 4% by weight into semi purified powdered diets and fed to hairless mice. Under moderate UVB exposure conditions resulting in 58% suppression of the systemic contact hypersensitivity response in control-fed mice, a dose-responsive protection was observed in the garlic-fed mice; contact hypersensitivity in the UVB-exposed mice fed 4% garlic extract was suppressed by only 19%. If the UVB exposure was replaced by topical application of one of a series of lotions containing increasing concentrations of cis-urocanic acid, a dose-responsive suppression of contact hypersensitivity was demonstrated in control-fed mice (urocanic acid at 25, 50, 100 and 200 micrograms per mouse resulting in 22-46% suppression). Mice fed a diet containing 1% aged garlic extract were partially protected from cis-urocanic acid-induced suppression of contact hypersensitivity, with greater protection from the lower concentrations of urocanic acid. Mice fed a diet containing 4% aged garlic extract were protected from all concentrations of urocanic acid. The results indicate that aged garlic extract contains ingredient(s) that protect from UVB-induced suppression of contact hypersensitivity and suggest that the mechanism of protection is by antagonism of the cis-urocanic acid mediation of this form of immunosuppression

Colored Contact Lens Dangers

Medline Plus

Full Text Available ... the United States. All contact lenses are medical devices that require a prescription and proper fitting by an eye-care professional. Retailers that sell contacts without a ...

Fragrance allergic contact dermatitis.

Science.gov (United States)

Cheng, Judy; Zug, Kathryn A

2014-01-01

Fragrances are a common cause of allergic contact dermatitis in Europe and in North America. They can affect individuals at any age and elicit a spectrum of reactions from contact urticaria to systemic contact dermatitis. Growing recognition of the widespread use of fragrances in modern society has fueled attempts to prevent sensitization through improved allergen identification, labeling, and consumer education. This review provides an overview and update on fragrance allergy. Part 1 discusses the epidemiology and evaluation of suspected fragrance allergy. Part 2 reviews screening methods, emerging fragrance allergens, and management of patients with fragrance contact allergy. This review concludes by examining recent legislation on fragrances and suggesting potential additions to screening series to help prevent and detect fragrance allergy.

Maternal employment and adolescents' relations with parents, siblings, and peers.

Science.gov (United States)

Montemayor, R

1984-12-01

The association between maternal employment status and the relations that adolescents have with their parents, siblings, and peers was investigated. Three daily reports of conflicts with family members and time spent with parents, peers, and alone were obtained from 64 tenth-grade adolescents using a telephone interviewing technique. Males, but not females, had more arguments, which were of longer duration and greater intensity, with their mothers and siblings when their mothers worked than when they did not. Female conflict behavior was unrelated to the work status of the mother. Adolescents of both sexes spent less time with their parents when their mothers worked, especially when they worked full-time, than when they were nonemployed. Adolescents with employed mothers generally spent less free time with their parents than those with nonemployed mothers. Time spent with parents in the performance of household tasks was not affected by maternal employment status. The need to take a family system perspective in order to understand fully the relationship between maternal employment and adolescent development was emphasized.

Sustained Ocular Delivery of Ciprofloxacin Using Nanospheres and Conventional Contact Lens Materials

Science.gov (United States)

Garhwal, Rahul; Shady, Sally F.; Ellis, Edward J.; Ellis, Jeanne Y.; Leahy, Charles D.; McCarthy, Stephen P.; Crawford, Kathryn S.

2012-01-01

Purpose. To formulate conventional contact lenses that incorporate nanosphere-encapsulated antibiotic and demonstrate that the lenses provide for sustained antibacterial activity. Methods. A copolymer composed of pullulan and polycaprolactone (PCL) was used to synthesize core-shell nanospheres that encapsulated ciprofloxacin. Bactericidal activity of the nanosphere-encapsulated ciprofloxacin (nanosphere/cipro) was tested by using liquid cultures of either Staphylococcus aureus or Pseudomonas aeruginosa. Nanosphere/cipro was then incorporated into HEMA-based contact lenses that were tested for growth inhibition of S. aureus or P. aeruginosa in liquid cultures inoculated daily with fresh bacteria. Lens designs included thin or thick lenses incorporating nanosphere/cipro and ciprofloxacin-HCl-soaked Acuvue lenses (Acuvue; Johnson & Johnson Vision Care, Inc., Jacksonville, FL). Results. Less than 2 μg/mL of nanosphere/cipro effectively inhibited the proliferation of cultures inoculated with 107 or 108 bacteria/mL of S. aureus and P. aeruginosa, respectively. HEMA-based contact lenses polymerized with nanosphere/cipro were transparent, effectively inhibited the proliferation of greater than 107/mL of bacteria added daily over 3 days of culture, and killed up to 5 × 109 total microbes in a single inoculation. A thicker lens design provided additional inhibition of bacterial growth for up to 96 hours. Conclusions. Core-shell nanospheres loaded with an antibiotic can be incorporated into a conventional, transparent contact lens and provide for sustained and effective bactericidal activity and thereby provide a new drug delivery platform for widespread use in treating ocular disorders. PMID:22266514

In Situ Local Contact Angle Measurement in a CO2-Brine-Sand System Using Microfocused X-ray CT.

Science.gov (United States)

Lv, Pengfei; Liu, Yu; Wang, Zhe; Liu, Shuyang; Jiang, Lanlan; Chen, Junlin; Song, Yongchen

2017-04-11

The wettability of porous media is of major interest in a broad range of natural and engineering applications. The wettability of a fluid on a solid surface is usually evaluated by the contact angle between them. While in situ local contact angle measurements are complicated by the topology of porous media, which can make it difficult to use traditional methods, recent advances in microfocused X-ray computed tomography (micro-CT) and image processing techniques have made it possible to measure contact angles on the scale of the pore sizes in such media. However, the effects of ionic strength, CO 2 phase, and flow pattern (drainage or imbibition) on pore-scale contact angle distribution are still not clear and have not been reported in detail in previous studies. In this study, we employed a micro-CT scanner for in situ investigation of local contact angles in a CO 2 -brine-sand system under various conditions. The effects of ionic strength, CO 2 phase, and flow pattern on the local contact-angle distribution were examined in detail. The results showed that the local contact angles vary over a wide range as a result of the interaction of surface contaminants, roughness, pore topology, and capillarity. The wettability of a porous surface could thus slowly weaken with increasing ionic strength, and the average contact angle could significantly increase when gaseous CO 2 (gCO 2 ) turns into supercritical CO 2 (scCO 2 ). Contact angle hysteresis also occurred between drainage and imbibition procedures, and the hysteresis was more significant under gCO 2 condition.

Space time manifolds and contact structures

Directory of Open Access Journals (Sweden)

K. L. Duggal

1990-01-01

Full Text Available A new class of contact manifolds (carring a global non-vanishing timelike vector field is introduced to establish a relation between spacetime manifolds and contact structures. We show that odd dimensional strongly causal (in particular, globally hyperbolic spacetimes can carry a regular contact structure. As examples, we present a causal spacetime with a non regular contact structure and a physical model [Gödel Universe] of Homogeneous contact manifold. Finally, we construct a model of 4-dimensional spacetime of general relativity as a contact CR-submanifold.

Intergroup Contact is Related to Evaluations of Interracial Peer Exclusion in African American Students.

Science.gov (United States)

Ruck, Martin D; Park, Henry; Crystal, David S; Killen, Melanie

2015-06-01

There are few published studies on the influence of intergroup contact on ethnic minority public school students' evaluations of interracial exclusion. In this study, African American children and adolescents (N = 158, 4th, 7th, and 10th grade; 67.1%) were individually interviewed regarding peer exclusion for scenarios depicting cross-race peer exclusion in various contexts. The level of positive intergroup contact, attribution of motives for exclusion, wrongfulness ratings, reasoning about exclusion, estimations of the frequency of exclusion, and awareness of the use of stereotypes to justify racial exclusion were assessed. Intergroup contact was significantly related to attributions of racial motives, higher ratings of wrongfulness, greater use of moral reasoning, and higher estimations of the frequency of exclusion. In addition to context effects, with increasing grade participants were more likely to refer to the historical and social circumstances contributing to the manifestation of racial stereotypes used to justify exclusion. The findings are discussed in terms of the existing research on intergroup relations and evaluations of social exclusion.

Nature Contacts: Employee Wellness in Healthcare.

Science.gov (United States)

Trau, Deborah; Keenan, Kimberly A; Goforth, Meggan; Large, Vernon

2016-04-01

This study was designed to ascertain the amount of outdoor, indoor, and indirect nature contact exposures hospital employees have in a workweek. Hospital employees have been found particularly vulnerable to work-related stress. Increasing the nature contact exposure for hospital employees can reduce perceived stress; stress-related health behaviors; and stress-related health outcomes from outdoor, indoor, and indirect exposures to nature. Staff on the fourth floor postsurgical unit of a large hospital (N = 42) were ask to participate in an employee questionnaire "nature contact questionnaire". This 16-item nature environment questionnaire measures the amount and types of nature contact exposures employees have during a workweek. Majority of employees reported few, if any, nature contact exposures, specifically in the area of outdoor nature contacts with limited indoor and indirect contacts. These results indicated that employees on the fourth floor postsurgical floor have limited ability to reduce stress through nature contact exposures which could impact their perceived levels of work stress and stress-related behaviors and health outcomes. Nature contact exposures are both a relatively easy and an inexpensive way to improve employee stress. These findings indicate limitations to employees' exposure to nature contacts. Healthcare environments would benefit from a concerted effort to provide increased outdoor, indoor, and indirect nature contact exposures for employees. © The Author(s) 2015.

Identification of risk products for fragrance contact allergy: a case-referent study based on patients' histories.

Science.gov (United States)

Johansen, J D; Andersen, T F; Kjøller, M; Veien, N; Avnstorp, C; Andersen, K E; Menné, T

1998-06-01

Fragrances are the first or second most common cause of contact allergy in dermatitis patients. The aim of this study was to identify risk products for fragrance contact allergy. The design was a case-control study with a case group of 78 fragrance-mix-positive eczema patients and two control groups, one consisting of 1,279 subjects selected as a random sample of the general population and the other consisting of 806 fragrance-mix-negative eczema patients. The identification of risk products was based on the patients' histories of rash to scented products. Analysis of the associations between first-time rash caused by different specified product categories and fragrance mix sensitivity was performed using logistic regression. It was found that first-time rash caused by deodorant sprays and/or perfumes were related to fragrance contact allergy in a comparison with both control groups. The risk (odds ratio) of being diagnosed as fragrance allergic was 2.3 to 2.9 greater in cases of a history of first-time rash to deodorant sprays and 3.3 to 3.4 greater in cases of a history of rash to perfumes than if no such history were present. First-time rash to cleansing agents, deodorant sticks, or hand lotions was also statistically significant but only in comparison with one of the control groups. Safety evaluation of fragrance materials used in perfumes and deodorant sprays should be performed with special attention.

Contact Hamiltonian mechanics

Energy Technology Data Exchange (ETDEWEB)

Bravetti, Alessandro, E-mail: alessandro.bravetti@iimas.unam.mx [Instituto de Investigaciones en Matemáticas Aplicadas y en Sistemas, Universidad Nacional Autónoma de México, A. P. 70543, México, DF 04510 (Mexico); Cruz, Hans, E-mail: hans@ciencias.unam.mx [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, A. P. 70543, México, DF 04510 (Mexico); Tapias, Diego, E-mail: diego.tapias@nucleares.unam.mx [Facultad de Ciencias, Universidad Nacional Autónoma de México, A.P. 70543, México, DF 04510 (Mexico)

2017-01-15

In this work we introduce contact Hamiltonian mechanics, an extension of symplectic Hamiltonian mechanics, and show that it is a natural candidate for a geometric description of non-dissipative and dissipative systems. For this purpose we review in detail the major features of standard symplectic Hamiltonian dynamics and show that all of them can be generalized to the contact case.

Contact materials for nanoelectronics

KAUST Repository

Alshareef, Husam N.; Quevedo-Ló pez, Manuel Angel Quevedo; Majhi, Prashant

2011-01-01

In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena

Rough Surface Contact

Directory of Open Access Journals (Sweden)

T Nguyen

2017-06-01

Full Text Available This paper studies the contact of general rough curved surfaces having nearly identical geometries, assuming the contact at each differential area obeys the model proposed by Greenwood and Williamson. In order to account for the most general gross geometry, principles of differential geometry of surface are applied. This method while requires more rigorous mathematical manipulations, the fact that it preserves the original surface geometries thus makes the modeling procedure much more intuitive. For subsequent use, differential geometry of axis-symmetric surface is considered instead of general surface (although this “general case” can be done as well in Chapter 3.1. The final formulas for contact area, load, and frictional torque are derived in Chapter 3.2.

Establishing an upper bound on contact resistivity of ohmic contacts to n-GaN nanowires

International Nuclear Information System (INIS)

Blanchard, Paul; Bertness, Kris A; Harvey, Todd; Sanford, Norman

2014-01-01

Contact resistivity ρ c is an important figure of merit in evaluating and improving the performance of electronic and optoelectronic devices. Due to the small size, unique morphology, and uncertain transport properties of semiconductor nanowires (NWs), measuring ρ c of contacts to NWs can be particularly challenging. In this work, Si-doped n-GaN NWs were grown by molecular beam epitaxy. Four-contact structures with 20 nm Ti/200 nm Al contacts were fabricated on individual NWs by photolithography, and the contacts were annealed to achieve ohmic behavior. Two-point resistances R 23  and four-point collinear resistances R 23collinear  were measured between the middle two contacts on each NW. These resistances were then modeled by taking into account the non-uniform distribution of current flow along the length of each contact. Contrary to the assumption that the resistance difference R 23 −R 23collinear  is equal to the total contact resistance R c , the distributed-current-flow contact model shows that R 23 −R 23collinear  ≪ R c when ρ c is sufficiently small. Indeed, the measured R 23 −R 23collinear  was so small in these devices that it was within the measurement uncertainty, meaning that it was not possible to directly calculate ρ c from these data. However, it was possible to calculate an upper bound on ρ c for each device based on the largest possible value of R 23 −R 23collinear . In addition, we took into account the large uncertainties in the NW transport properties by numerically maximizing ρ c with respect to the uncertainty range of each measured and assumed parameter in the contact model. The resulting upper limits on ρ c ranged from 4.2 × 10 −6  to 7.6 × 10 −6  Ω cm 2 , indicating that 20 nm Ti/200 nm Al is a good choice of ohmic contact for moderately-doped n-GaN NWs. The measurement and numerical analysis demonstrated here offer a general approach to modeling ohmic contact resistivity via NW four

The waffle: a new photovoltaic diode geometry having high efficiency and backside contacts

DEFF Research Database (Denmark)

Leistiko, Otto

1994-01-01

By employing anisotropic etching techniques and advanced device processing it is possible to micromachine new types of mechanical, electronic, and optical devices of silicon, which have unique properties. In this paper the characteristics of a new type of photovoltaic diode fabricated employing...... these processing techniques are described. This novel device has not only high efficiency, but also has both contacts placed on the backside of the cell. The first devices which are only 50 mm in diameter are of relatively good quality with low leakage currents (nA), high breakdown voltages (80 V), and low series...... resistance (mohms). The measured efficiencies at AM 1.5 lie between 12 to 15% with short circuit currents of 25-30 mA/cm2, and open circuit voltages of 0.58-0.6 V...

Fiddler's neck: Chin rest-associated irritant contact dermatitis and allergic contact dermatitis in a violin player.

Science.gov (United States)

Caero, Jennifer E; Cohen, Philip R

2012-09-15

Fiddler's neck refers to an irritant contact dermatitis on the submandibular neck of violin and viola players and an allergic contact dermatitis to nickel from the bracket attaching the violin to the chin rest on the violinist's supraclavicular neck. A 26-year-old woman developed submandibular and supraclavicular left neck lesions corresponding to the locations of the chin rest and bracket that was attached to her violin that held it against her neck when she played. Substitution of a composite chin rest, which did not contain nickel, and the short-term application of a low potency topical corticosteroid cream, resulted in complete resolution of the allergic contact dermatitis supraclavicular neck lesion. The irritant contact dermatitis submandibular neck lesion persisted. In conclusion, violin players are predisposed to developing irritant contact dermatitis or allergic contact dermatitis from the chin rest. We respectfully suggest that the submandibular neck lesions from contact with the chin rest be referred to as 'fiddler's neck - type 1,' whereas the supraclavicular neck lesions resulting from contact of the bracket holding the chin rest in place be called 'fiddler's neck - type 2.' A composite chin rest should be considered in patients with a preceding history of allergic contact dermatitis to nickel.

Contact and contagion: Probability of transmission given contact varies with demographic state in bighorn sheep.

Science.gov (United States)

Manlove, Kezia R; Cassirer, E Frances; Plowright, Raina K; Cross, Paul C; Hudson, Peter J

2017-07-01

Understanding both contact and probability of transmission given contact are key to managing wildlife disease. However, wildlife disease research tends to focus on contact heterogeneity, in part because the probability of transmission given contact is notoriously difficult to measure. Here, we present a first step towards empirically investigating the probability of transmission given contact in free-ranging wildlife. We used measured contact networks to test whether bighorn sheep demographic states vary systematically in infectiousness or susceptibility to Mycoplasma ovipneumoniae, an agent responsible for bighorn sheep pneumonia. We built covariates using contact network metrics, demographic information and infection status, and used logistic regression to relate those covariates to lamb survival. The covariate set contained degree, a classic network metric describing node centrality, but also included covariates breaking the network metrics into subsets that differentiated between contacts with yearlings, ewes with lambs, and ewes without lambs, and animals with and without active infections. Yearlings, ewes with lambs, and ewes without lambs showed similar group membership patterns, but direct interactions involving touch occurred at a rate two orders of magnitude higher between lambs and reproductive ewes than between any classes of adults or yearlings, and one order of magnitude higher than direct interactions between multiple lambs. Although yearlings and non-reproductive bighorn ewes regularly carried M. ovipneumoniae, our models suggest that a contact with an infected reproductive ewe had approximately five times the odds of producing a lamb mortality event of an identical contact with an infected dry ewe or yearling. Consequently, management actions targeting infected animals might lead to unnecessary removal of young animals that carry pathogens but rarely transmit. This analysis demonstrates a simple logistic regression approach for testing a priori

The Employer Perspective on Sustainable Employability in the Construction Industry

NARCIS (Netherlands)

Tonnon, Susanne C; van der Veen, Rozan; Westerman, Marjan J; Robroek, Suzan J W; van der Ploeg, Hidde P; Van Der Beek, Allard J.; Proper, Karin I.

OBJECTIVE: To determine the measures employers in the construction industry take to promote sustainable employability, the barriers and facilitators that influence implementation and employer needs. METHODS: Questionnaire among 499 employers and interviews with 17 employers. RESULTS: Employers

[Contact allergy to henna tattoos].

Science.gov (United States)

Steinkjer, Bjarte; Stangeland, Katarina Zak; Mikkelsen, Carsten Sauer

2011-03-18

Tattoos with henna colours have become very popular and the prevalence of contact allergy seems to increase. This is a short review article based on our own clinical experience and literature identified through a search in PubMed with the words "henna", "paraphenylendiamin" and "allergic contact dermatitis." A case report is included. It is well documented that many experience skin reactions after henna tattoos. The cause is almost always contact allergy to the azo compound paraphenylendiamin, which is added to speed up the process and make the colour darker. Most people, including children, get henna tattoos during vacations in Asia or the Mediterranean. Established contact allergy is permanent. Many hair-colour products contain paraphenylendiamin, and persons with contact allergy against the product may develop a very strong contact allergic eczema by use of such substances. Acute reactions are treated with local cortisone products, or with systemic steroids. Cross reaction to substances with a similar chemical structure may occur. Tattoos with paraphenylendiamin-containing henna colours should be avoided.

Tc1-mediated contact sensitivity reaction, its mechanism and regulation

Directory of Open Access Journals (Sweden)

Magdalena Zemelka-Wiącek

2014-07-01

Full Text Available The contact hypersensitivity reaction (CHS to haptens is a classic example of cell-mediated immune response. In the effector phase, two stages can be distinguished: an early component, that appears only 2 hours after subsequent contact with the hapten, and the late component that develops approximately 24 hours later which is mediated by TCRαβ+ cells. The effector lymphocytes may be CD4+ T helper 1 (Th1 cells or CD8+ T cytotoxic 1 (Tc1 cells, which depends on the employed hapten and/or mice strain. NKT lymphocytes play the crucial role in the CHS initiation, by supporting B1 cells in the antigen-specific IgM antibodies production. The development of an early component is essential for the recruitment of T effector (Teff cells to the side of hapten deposition and for the complete expansion of inflammatory reaction. The CHS reaction is under T regulatory (Treg cells control, both in the induction phase as well as in the effector phase. A new view of a negative regulation of the Tc1 mediated CHS response is based on the suppression induced by epicutaneous (EC application of protein antigen. The DNP-BSA skin application, on a gauze patch, leads to a state of immunosuppression. This maneuver results in rising the population of Treg cells with TCRαβ+CD4+CD25+Foxp3+ phenotype. The mechanism of suppression requires direct contact between Treg cells and Teff cells and the participation of CTLA-4 molecule is also necessary. The described method of evoking immune tolerance via EC immunization may contribute to elaborate a new method of allergic contact dermatitis therapy. This is because of its effectiveness, ease of induction and non-invasive protein antigen application.

Intercellular contact: its influence on the Dsub(q) of mammalian cell survival curves

International Nuclear Information System (INIS)

Durand, R.E.; Sutherland, R.M.

1975-01-01

Cell survival in tissues exposed to a given dose of ionizing radiation is usually greater than that of similar cells grown individually in vitro, despite the fact that the radiosensitivities (D 0 ) are virtually identical under the two conditions. An analogous increase in cell survival is observed when Chinese hamster V79-171 cells are grown in suspension culture and irradiated as multicell spheroids. Unfortunately, the information gained from the survival curves so obtained is limited by the inhomogeneity of the cell population with respect to both degree of contact and cell cycle position. The latter can be studied using synchronized small spheroids. The ratio of Dsub(q) of spheroid cells to Dsub(q) of single cells increased as the cells progressed through the cell cycle, from a minimum of 1.3 for G 1 phase cells to a maximum of 2.2 for late S-phase cells. The enhanced survival, or 'contact effect', developed slowly as the spheroids grew, after an initial latent period of about one generation cycle of the cells. A second effect of intercellular contact on mammalian cell survival has also been observed. When cells are assayed under conditions in which intercellular contact is maintained, the net cellular survival is increased further. This effect is different from the usual repair of potentially lethal damage, in that it occurs much more slowly and results in modification of the survival-curve shoulder. Not all cell types tested have shown enhanced survival when grown as spheroids. Several MNNG-induced mutants of the Chinese hamster V79-171 line have been isolated and sublines which do and do not show the contact effect are now available. These may permit study of the mechanism(s) of contact effects. (author)

The Role of Selection Effects in the Contact Hypothesis: Results from a U.S. National Survey on Sexual Prejudice.

Science.gov (United States)

Loehr, Annalise; Doan, Long; Miller, Lisa R

2015-11-01

Empirical research has documented that contact with lesbians and gays is associated with more positive feelings toward and greater support for legal rights for them, but we know less about whether these effects extend to informal aspects of same-sex relationships, such as reactions to public displays of affection. Furthermore, many studies have assumed that contact influences levels of sexual prejudice; however, the possibility of selection effects, in which less sexually prejudiced people have contact, and more sexually prejudiced people do not, raises some doubts about this assumption. We used original data from a nationally representative sample of heterosexuals to determine whether those reporting contact with a lesbian, gay, bisexual, or transgender friend or relative exhibited less sexual prejudice toward lesbian and gay couples than those without contact. This study examined the effect of contact on attitudes toward formal rights and a relatively unexplored dimension, informal privileges. We estimated the effect of having contact using traditional (ordinary least squares regression) methods before accounting for selection effects using propensity score matching. After accounting for selection effects, we found no significant differences between the attitudes of those who had contact and those who did not, for either formal or informal measures. Thus, selection effects appeared to play a pivotal role in confounding the link between contact and sexual prejudice, and future studies should exercise caution in interpreting results that do not account for such selection effects.

Bias dependent specic contact resistance of phase change material to metal contacts

NARCIS (Netherlands)

Roy, Deepu; in 't Zandt, Micha; Wolters, Robertus A.M.

2010-01-01

Knowledge of contact resistance of phase change materials (PCM) to metal electrodes is important for scaling, device modeling and optimization of phase change random access memory (PCRAM) cells. In this article, we report the systematic determination of the speci_c contact resistance (_c) with

A study on the contact angles of a water droplet on smooth and rough solid surfaces

International Nuclear Information System (INIS)

Park, Ju Young; Ha, Man Yeong; Choi, Ho Jin; Hong, Seung Do; Yoon, Hyun Sik

2011-01-01

We investigated the wetting characteristics such as contact angle, wetting radius and topography of water droplets on smooth and random solid surfaces. Molecular dynamic simulation is employed to analyze the wetting behavior of water droplets on smooth and rough surfaces by considering different potential energy models of bond, angle, Lennard-Jones and Coulomb to calculate the interacting forces between water molecules. The Lennard-Jones potential energy model is adopted as an interaction model between water molecules and solid surface atoms. The randomly rough surface is generated by changing the standard deviation of roughness height from 1 A to 3 A with the fixed autocorrelation length. The size of water droplet considered is in the range from 2,000 to 5,000 molecules. The contact angles increase generally with increasing number of water molecules. For a hydrophobic surface whose characteristic energy is 0.1 kcal/mol, the contact angles depend rarely on the standard deviation of the roughness height. However, when the surface energy is 0.5 and 1.0 kcal/mol, the contact angles depend on both the roughness height of surfaces and droplet size