WorldWideScience

Sample records for grease fleece weight

  1. Correlations of subjectively assessed fleece and conformation traits ...

    African Journals Online (AJOL)

    High genetic correlations were estimated among the subjectively assessed fleece traits and fibre diameter, where animals with lower fibre diameter had softer fleeces, better crimp definition, their fleeces were more even, less dense and had higher creeping belly scores (the extent to which belly wool tends to creep up the ...

  2. NEW RADIATION RESISTANT GREASES

    Energy Technology Data Exchange (ETDEWEB)

    DasGupta, Sharda; Slobodian, J. T.

    1962-11-20

    New radiation resistant greases were prepared from commercially available greases by carrying out radioinduced reactions with styrene. The radiation tolerances of the products were 250-1000 fold more than the starting materials and any product of similar properties now available. The various properties of the new products initially and after exposure to large radiation doses were in no case inferior to the original greases and in some respects improvements were observed. Radiation tolerance of commercial greases could be enhanced by the addition of polystyrene to form a physical mixture rather than copolymers. The reaction mechanisms involved at all stages were studied using infrared spectroscopic techniques. (P.C.H.)

  3. Study of a magnetorheological grease clutch

    International Nuclear Information System (INIS)

    Kavlicoglu, Barkan M; Gordaninejad, Faramarz; Wang, Xiaojie

    2013-01-01

    In high-speed viscous clutch applications that require low drag (viscous) torque, magnetorheological (MR) fluids are problematic due to their plastic viscosity. As the clutch speed increases the drag torque might exceed the allowable drag torque limit, because the viscous torque is proportional to the speed. To eliminate this problem, various MR greases are utilized in a clutch and their performance is examined. In the experimental study, the torque transfer capacity of a double-plate clutch for operating speeds up to 1200 rpm is conducted. Six different MR greases with various particle loadings and particle sizes are evaluated in the clutch. The rheological properties of MR grease with 90% particle loading in weight are compared with a commercially available MR fluid. The torque performance of the MR grease clutch is also compared with that of the clutch using MR fluid. It is demonstrated that the off-state (no applied magnetic field) torque output of the MR grease clutch is constant in the tested range of the operating speed. In contrast, the torque capacity of the clutch with MR fluid shows a strong dependence on the operating speed. Moreover, it is shown that the iron particle size of the MR grease does not affect the torque output. The MR greases demonstrated an up to 75% increase in the torque capacity compared to the commercial MR fluid. (paper)

  4. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  5. Urban Waste Grease Resource Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.

    1999-03-17

    This study collected and analyzed data on urban waste grease resources in 30 randomly selected metropolitan areas in the United States. Two major categories (yellow grease feedstock collected from restaurants by rendering companies; and grease trap wastes from restaurants, which can either be pumped into tank trucks for disposal or flow through municipal sewage systems into wastewater treatment plants) were considered in this study.

  6. Effect of carbonyl iron particles composition on the physical characteristics of MR grease

    Energy Technology Data Exchange (ETDEWEB)

    Mohamad, Norzilawati, E-mail: mnorzilawati@gmail.com; Mazlan, Saiful Amri, E-mail: amri.kl@utm.my [Vehicle System Engineering, Malaysia – Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, 54000 (Malaysia); Ubaidillah, E-mail: ubaidillah@uns.ac.id [Vehicle System Engineering, Malaysia – Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, 54000 (Malaysia); Mechanical Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Kentingan, Surakarta, 57126, Central Java, Surakarta (Indonesia)

    2016-03-29

    Magnetorheological (MR) grease is an extension of the study of magnetorheological materials. The MR grease can help to reduce the particles sedimentation problem occurred in the MR fluids. Within this study, an effort has been taken to investigate the effect of different weight compositions of carbonyl iron particles on the physical and chemical characteristics of the MR grease under off-state condition (no magnetic field). The MR grease is prepared by mixing carbonyl iron particles having a size range of 1 to 10 µm with commercial NPC Highrex HD-3 grease. Characterizations of MR grease are investigated using Vibrating Sample Magnetometer (VSM), Environmental Scanning Electron Microscopy (ESEM), Differential Scanning Calorimeter (DSC) and rheometer. The dependency of carbonyl iron particles weight towards the magnetic properties of MR grease and other characterizations are investigated.

  7. [Investigation of potential toxic factors for fleece-flower root: from perspective of processing methods evolution].

    Science.gov (United States)

    Cui, He-Rong; Bai, Zhao-Fang; Song, Hai-Bo; Jia, Tian-Zhu; Wang, Jia-Bo; Xiao, Xiao-He

    2016-01-01

    In recent years, the rapid growth of reports on fleece-flower root-caused liver damages has drawn wide attention of both at home and abroad, however, there were rare literature on toxicology of fleece-flower root in ancient Chinese medicine. But why there are so many reports on toxicology of fleece-flower root now compared with the ancient literature? As a typical tonic medicine, the clinical utility of fleece-flower root was largely limited by its standardization and reliability of processing methods in ancient Chinese medicine. The ancient processing methods of fleece-flower root emphasized nine times of steaming and nine times of drying, while the modern processes have been simplified into one time of steaming. Whether the differences between ancient and modern processing methods are the potential cause of the increased events of fleece-flower root-caused liver damages. We will make deep analysis and provide new clues and perspectives for the research on its toxicity. This article, therefore, would discuss the affecting factors and key problems in toxicity attenuation of fleece-flower root on the basis of sorting out the processing methods of fleece-flower root in ancient medical books and modern standards, in order to provide the reference for establishing specification for toxicity attenuation of fleece-flower root. Copyright© by the Chinese Pharmaceutical Association.

  8. Canadian company develops better grease

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    Development of a new type of grease for hydroelectric applications that offers improved performance characteristics and reduced environmental side-effects was discussed. The new product developed by Utility Services Associates of Toronto and known as Cor-Tek VSG, performs better than most mineral oil-based greases. It is readily bio-degradable and contains none of the environmentally questionable additives used in greases. It is made primarily of canola oil, a renewable resource. It has excellent resistance to water washout, retards rust formation, has an extreme pressure rating, is compatible with most of the current greases, works well in both manual and automatic greasing systems, and is said to be excellent for lignum vitae main bearings on a Kaplan turbine

  9. Formulation of lubricating grease using Beeswax thickener

    Science.gov (United States)

    Suhaila, N.; Japar, A.; Aizudin, M.; Aziz, A.; Najib Razali, Mohd

    2018-04-01

    The issues on environmental pollution has brought the industries to seek the alternative green solutions for lubricating grease formulation. The significant challenges in producing modified grease are in which considering the chosen thickener as one of the environmental friendly material. The main purposes of the current research were to formulate lubricant grease using different types of base oils and to study the effect of thickener on the formulated lubricant grease. Used oil and motor oil were used as the base oils for the grease preparation. Beeswax and Damar were used as thickener and additive. The grease is tested based on its consistency, stability and oil bleeding. The prepared greases achieved grease consistency of grade 2 and 3 except for grease with unfiltered used oil. Grease formulated with used oil and synthetic oil tend to harden and loss its lubricating ability under high temperature compared to motor oil’ grease. Grease modification using environmental friendly thickener were successfully formulated but it is considered as a low temperature grease as the beeswax have low melting point of 62°C-65°C.

  10. Production of heavy greases from lignite

    Energy Technology Data Exchange (ETDEWEB)

    1921-03-18

    A process is described for the extraction of heavy greases and wagon greases and their equivalents, by separation from bitumins, resins, and waxes contained in lignite, peat, bituminous shale, fossil wax, paraffin, etc., characterized by the fact that for the extraction are used solvents of high boiling point, such as mineral oils, grease oils, tar oils, and other equivalents, which are not eliminated and at the same time constitute a part of the product obtained.

  11. Greasing the Wheels of Trade

    OpenAIRE

    Hendrik P. van Dalen; Aico P. van Vuuren

    2003-01-01

    This discussion paper resulted in a publication in 'De Economist' , 2005, 153(2), 139-165. How much does a nation spend on resources to 'grease the wheels of trade'? To examine this question the Dutch economy is used as an exemplary case as the Netherlands are known as a nation of traders. This image was derived in the seventeenth century from successes in long distance trade, shipping and financial innovations. Despite its historical background in trading the potential to 'truck and barter' ...

  12. Effects of Hydrocarbon-Based Grease on Rapid Prototype Material Used for Grease Retention Shrouds

    Science.gov (United States)

    Zakrajsek, Andrew J.; Valco, Daniel J.; Street, Kenneth W., Jr.

    2010-01-01

    Effects of hydrocarbon-based greases on specific rapid prototype (RP) materials used to fabricate grease retention shrouds (GRS) were explored in this study. Grease retention shrouds are being considered as a way to maintain adequate grease lubrication at the gear mesh in a prototype research transmission system. Due to their design and manufacturing flexibility, rapid prototype materials were chosen for the grease retention shrouds. In order to gain a better understanding of the short and long term effects grease pose on RP materials, research was conducted on the interaction of hydrocarbon-based grease with RP materials. The materials used in this study were durable polyamide (nylon), acrylonitrile butadiene styrene (ABS), and WaterClear 10120. Testing was conducted using Mobilgrease 28 and Syn-Tech 3913G grease (gear coupling grease). These greases were selected due to their regular use with mechanical components. To investigate the effect that grease has on RP materials, the following methods were used to obtain qualitative and quantitative data: Fourier transform infrared spectroscopy (FT-IR), interference profilometer measurements, digital camera imaging, physical shape measurement, and visual observations. To record the changes in the RP materials due to contact with the grease, data was taken before and after the grease application. Results showed that the WaterClear 10120 RP material provided the best resistance to grease penetration as compared to nylon and ABS RP materials. The manufacturing process, and thus resulting surface conditions of the RP material, played a key role in the grease penetration properties and resilience of these materials.

  13. Environmentally adjusted oil and grease

    International Nuclear Information System (INIS)

    Andersson, Bert; Lindberg, J.

    1992-01-01

    With the intention of maintaining healthy environment in our rivers Vattenfall in 1988 initiated a project called 'Environmentally friendly oils'. The goal was to find oils for bearings and hydraulic systems that would cause less negative environmental effects and still maintain a good technical function. Based on the results of the project it is recommended, for both economical and environmental reasons, to change to synthetic oil in bearings and to hydraulic oil made of white oil in regulating systems. The change may be carried out in connection to other work on the system in question. Special care is recommended when cleaning the system from old oil and dirt. In order to maintain the high quality of the oil, also during manufacturing and assembling, one should follow the recommendations outlined in the report. In bearings where used grease leaks into the river, a grease made of white oil should be used. The quality of the rubber sealings must be adapted to the oil used, in order to secure a good function. In order to bring down the number of products and to create an open market some additional changes is necessary in the specifications of oil. Further research regarding oil and sealing is planned. (3 refs.)

  14. Factors influencing the price of greasy fleece wool in South Africa ...

    African Journals Online (AJOL)

    Factors influencing the price of greasy fleece wool in South Africa. G.J. Erasmus, G.J. Delport. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

  15. 7 CFR 2902.31 - Greases.

    Science.gov (United States)

    2010-01-01

    ... applies are: (i) Food grade greases. Lubricants that are designed for use on food-processing equipment as... parts and equipment in locations in which there is exposure of the lubricated part to food. (ii... are designed for use on railroad tracks or heavy crane tracks. (iv) Truck greases. Lubricants that are...

  16. Evaluation of different polyolefins as rheology modifier additives in lubricating grease formulations

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Alfonso, J.E.; Valencia, C.; Sanchez, M.C. [Departamento de Ingenieria Quimica, Facultad de Ciencias Experimentales, Universidad de Huelva, Campus Universitario del Carmen, 21071 Huelva (Spain); Franco, J.M., E-mail: franco@uhu.es [Departamento de Ingenieria Quimica, Facultad de Ciencias Experimentales, Universidad de Huelva, Campus Universitario del Carmen, 21071 Huelva (Spain); Gallegos, C. [Departamento de Ingenieria Quimica, Facultad de Ciencias Experimentales, Universidad de Huelva, Campus Universitario del Carmen, 21071 Huelva (Spain)

    2011-08-15

    Highlights: {yields} Evaluation of different polyolefins as modifiers of the rheological properties and mechanical stability of lithium lubricating greases. {yields} The type of polymer, molecular weight, cristallinity degree and vinyl acetate content influences the rheological and thermal response of lubricating greases. {yields} The crystallinity degree, mainly dependent on the nature of the polymer, is the most highly influencing parameter on the rheology of lubricating greases. {yields} The rheological modification exerted by EVA copolymers mainly depends on the vinyl acetate content. - Abstract: The purpose of the present work is to evaluate the effect that different polyolefins, used as additives in small proportions, exert on the rheological properties of standard lithium lubricating greases. Grease formulations containing several polyolefins, differing in nature and molecular weight, were manufactured and rheologically characterized. The influence of the type of polymer, molecular weight, crystallinity degree and vinyl acetate content has been analyzed. Small-amplitude oscillatory shear (SAOS) and viscous flow measurements, as well as calorimetric (DSC) and thermogravimetric (TGA) analysis, were carried out. In general, the addition of polymers such as HDPE, LDPE, LLDPE and PP to lithium lubricating greases significantly increases the values of the rheological parameters analyzed, consistency and mechanical stability. However, the use of polyolefins as rheology modifiers does not significantly affect the friction coefficient determined in a tribological contact. The crystallinity degree, mainly dependent on the nature of the polymer, has been found the most highly influencing parameter on the rheology of the lubricating greases studied. However, the rheological modification exerted by EVA copolymers mainly depends on the vinyl acetate content. Thus, a negative effect in both apparent viscosity and linear viscoelastic functions of greases was obtained when

  17. Anastomotic stability and wound healing of colorectal anastomoses sealed and sutured with a collagen fleece in a rat peritonitis model

    Directory of Open Access Journals (Sweden)

    Christoph Holmer

    2014-01-01

    Conclusion: The use of a thrombin/fibrinogen-coated collagen fleece showed similar efficacy to conventional sutures in colorectal anastomoses in the presence of peritonitis inflammation, and may provide additional benefits due to an increase in mature granulation tissue.

  18. Field Demonstration for Biodegradable Military Multipurpose Grease

    National Research Council Canada - National Science Library

    Rhee, In-Sik

    2001-01-01

    Soils and ground water at many military facilities throughout the United States have been contaminated with petroleum based products, such as engine oils, greases, hydraulic fluids, and fuels, often...

  19. Moisture properties of raised 3-thread fleece fabric knitted with different face and fleecy yarns

    Directory of Open Access Journals (Sweden)

    Alaa Arafa Badr

    2016-09-01

    So, in this study, nine three-thread fleece fabrics of different composition materials have been studied, where these knitted fabrics are produced in a special circular knitted machine. The developed fabrics are taken to measure, water vapor permeability “WVP”, gain%, air permeability, drying time, color difference, immersion time and bursting strength. The test results were discussed statistically with single factor ANOVA. From the experimental results, it has been observed that the difference between face and fleecy yarns material was highly significant for the whole fabric in the water vapor permeability, gain%, color difference and immersion time. Three-thread Fleece fabric knitted with Egyptian cotton for the face and fleecy yarns has the maximum bursting strength compared to other samples having Bamboo and Tencel yarns.

  20. Degradation Characterization of Thermal Interface Greases

    Energy Technology Data Exchange (ETDEWEB)

    Major, Joshua [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Narumanchi, Sreekant V [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Paret, Paul P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Blackman, Gregory [DuPont; Wong, Arnold [DuPont; Meth, Jeffery [DuPont

    2018-02-12

    Thermal interface materials (TIMs) are used in power electronics packaging to minimize thermal resistance between the heat generating component and the heat sink. Thermal greases are one such class. The conformability and thin bond line thickness (BLT) of these TIMs can potentially provide low thermal resistance throughout the operation lifetime of a component. However, their performance degrades over time due to pump-out and dry-out during thermal and power cycling. The reliability performance of greases through operational cycling needs to be quantified to develop new materials with superior properties. NREL, in collaboration with DuPont, has performed thermal and reliability characterization of several commercially available thermal greases. Initial bulk and contact thermal resistance of grease samples were measured, and then the thermal degradation that occurred due to pump-out and dry-out during temperature cycling was monitored. The thermal resistances of five different grease materials were evaluated using NREL's steady-state thermal resistance tester based on the ASTM test method D5470. Greases were then applied, utilizing a 2.5 cm x 2.5 cm stencil, between invar and aluminum plates to compare the thermomechanical performance of the materials in a representative test fixture. Scanning Acoustic microscopy, thermal, and compositional analyses were performed periodically during thermal cycling from -40 degrees C to 125 degrees C. Completion of this characterization has allowed for a comprehensive evaluation of thermal greases both for their initial bulk and contact thermal performance, as well as their degradation mechanisms under accelerated thermal cycling conditions.

  1. Degradation Characterization of Thermal Interface Greases: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    DeVoto, Douglas J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Major, Joshua [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Paret, Paul P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Blackman, G. S. [DuPont Experimental Station; Wong, A. [DuPont Experimental Station; Meth, J. S. [DuPont Experimental Station

    2017-08-03

    Thermal interface materials (TIMs) are used in power electronics packaging to minimize thermal resistance between the heat generating component and the heat sink. Thermal greases are one such class. The conformability and thin bond line thickness (BLT) of these TIMs can potentially provide low thermal resistance throughout the operation lifetime of a component. However, their performance degrades over time due to pump-out and dry-out during thermal and power cycling. The reliability performance of greases through operational cycling needs to be quantified to develop new materials with superior properties. NREL, in collaboration with DuPont, has performed thermal and reliability characterization of several commercially available thermal greases. Initial bulk and contact thermal resistance of grease samples were measured, and then the thermal degradation that occurred due to pump-out and dry-out during temperature cycling was monitored. The thermal resistances of five different grease materials were evaluated using NREL's steady-state thermal resistance tester based on the ASTM test method D5470. Greases were then applied, utilizing a 2.5 cm x 2.5 cm stencil, between invar and aluminum plates to compare the thermomechanical performance of the materials in a representative test fixture. Scanning Acoustic microscopy, thermal, and compositional analyses were performed periodically during thermal cycling from -40 degrees Celcius to 125 degrees Celcius. Completion of this characterization has allowed for a comprehensive evaluation of thermal greases both for their initial bulk and contact thermal performance, as well as their degradation mechanisms under accelerated thermal cycling conditions.

  2. Lubrication from mixture of boric acid with oils and greases

    Science.gov (United States)

    Erdemir, Ali

    1995-01-01

    Lubricating compositions including crystalline boric acid and a base lubricant selected from oils, greases and the like. The lubricity of conventional oils and greases can also be improved by adding concentrates of boric acid.

  3. Nanoclays for polymer nanocomposites, paints, inks, greases

    Indian Academy of Sciences (India)

    ... rheological modifier for paints, inks and greases, drug delivery vehicle for controlled release of therapeutic agents, and nanoclays for industrial waste water as well as potable water treatment to make further step into green environment. A little amount of nanoclay can alter the entire properties of polymers, paints, inks and ...

  4. Probe and Sensors Development for Level Measurement of Fats, Oils and Grease in Grease Boxes

    Directory of Open Access Journals (Sweden)

    José Faria

    2016-09-01

    Full Text Available The wide spread of food outlets has become an environmental and sanitation infrastructure problem, due to Fats, Oils and Grease (FOG. A grease box is used at the industrials facilities to collect the FOG, in a specific time window, while its quality is good for recycling (e.g., biodiesel and it is economically valuable. After this period, it will be disposed at a cost. For the proper management of the grease boxes, it is necessary to know the quantity of FOG inside the boxes, which is a major problem, as the boxes are sealed and permanently filled with water. The lack of homogeneity of the FOG renders it not detectable by current probes for level detection in liquids. In this article, the design, development and testing of a set of probes for FOG level measurement, based on the principles used in sensors for the detection of liquids inside containers, is described. The most suitable probe, based on the capacitance principle, together with the necessary hardware and software modules for data acquisition and transmission, was developed and tested. After the development phase, the probe was integrated on a metropolitan system for FOG collection and grease box management in partnership with a grease box management company.

  5. Estimates of genetic parameters and genetic trends for live weight and fleece traits in Menz sheep

    NARCIS (Netherlands)

    Gizaw, S.; Lemma, S.; Komen, J.; Arendonk, van J.A.M.

    2007-01-01

    Menz sheep are indigenous to the highlands of Ethiopia, and highly valued for their meat and wool production. The area is characterized as a low input mixed barley-sheep production system. In 1998, a selection experiment was set up to evaluate the response of Menz sheep to selection for yearling

  6. Brown Grease to Biodiesel Demonstration Project Report

    Energy Technology Data Exchange (ETDEWEB)

    San Francisco Public Utilities Commission; URS Corporation; Biofuels, Blackgold; Carollo Engineers

    2013-01-30

    Municipal wastewater treatment facilities have typically been limited to the role of accepting wastewater, treating it to required levels, and disposing of its treatment residuals. However, a new view is emerging which includes wastewater treatment facilities as regional resource recovery centers. This view is a direct result of increasingly stringent regulations, concerns over energy use, carbon footprint, and worldwide depletion of fossil fuel resources. Resources in wastewater include chemical and thermal energy, as well as nutrients, and water. A waste stream such as residual grease, which concentrates in the drainage from restaurants (referred to as Trap Waste), is a good example of a resource with an energy content that can be recovered for beneficial reuse. If left in wastewater, grease accumulates inside of the wastewater collection system and can lead to increased corrosion and pipe blockages that can cause wastewater overflows. Also, grease in wastewater that arrives at the treatment facility can impair the operation of preliminary treatment equipment and is only partly removed in the primary treatment process. In addition, residual grease increases the demand in treatment materials such as oxygen in the secondary treatment process. When disposed of in landfills, grease is likely to undergo anaerobic decay prior to landfill capping, resulting in the atmospheric release of methane, a greenhouse gas (GHG). This research project was therefore conceptualized and implemented by the San Francisco Public Utilities Commission (SFPUC) to test the feasibility of energy recovery from Trap Waste in the form of Biodiesel or Methane gas. The research goals are given below: To validate technology performance; To determine the costs and benefits [including economic, socioeconomic, and GHG emissions reduction] associated with co-locating this type of operation at a municipal wastewater treatment plant (WWTP); To develop a business case or model for replication of the

  7. WATER TEMPERATURE and other data from GOLDEN FLEECE in the NE Pacific from 1989-09-16 to 1989-10-02 (NODC Accession 9000090)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data in this accession was collected in NE Pacific (limit-180) from ship Golden Fleece between September 16, 1989 and October 2, 1989. The real time data of...

  8. A genomics-informed, SNP association study reveals FBLN1 and FABP4 as contributing to resistance to fleece rot in Australian Merino sheep

    Directory of Open Access Journals (Sweden)

    Norris Belinda J

    2010-05-01

    Full Text Available Abstract Background Fleece rot (FR and body-strike of Merino sheep by the sheep blowfly Lucilia cuprina are major problems for the Australian wool industry, causing significant losses as a result of increased management costs coupled with reduced wool productivity and quality. In addition to direct effects on fleece quality, fleece rot is a major predisposing factor to blowfly strike on the body of sheep. In order to investigate the genetic drivers of resistance to fleece rot, we constructed a combined ovine-bovine cDNA microarray of almost 12,000 probes including 6,125 skin expressed sequence tags and 5,760 anonymous clones obtained from skin subtracted libraries derived from fleece rot resistant and susceptible animals. This microarray platform was used to profile the gene expression changes between skin samples of six resistant and six susceptible animals taken immediately before, during and after FR induction. Mixed-model equations were employed to normalize the data and 155 genes were found to be differentially expressed (DE. Ten DE genes were selected for validation using real-time PCR on independent skin samples. The genomic regions of a further 5 DE genes were surveyed to identify single nucleotide polymorphisms (SNP that were genotyped across three populations for their associations with fleece rot resistance. Results The majority of the DE genes originated from the fleece rot subtracted libraries and over-representing gene ontology terms included defense response to bacterium and epidermis development, indicating a role of these processes in modulating the sheep's response to fleece rot. We focused on genes that contribute to the physical barrier function of skin, including keratins, collagens, fibulin and lipid proteins, to identify SNPs that were associated to fleece rot scores. Conclusions We identified FBLN1 (fibulin and FABP4 (fatty acid binding protein 4 as key factors in sheep's resistance to fleece rot. Validation of these

  9. Efeitos da temperatura e da movimentação do ar sobre o isolamento térmico do velo de ovinos em câmara climática Effect of temperature and air velocity on the thermal insulation of the fleece of sheep in climatic chamber

    Directory of Open Access Journals (Sweden)

    Alex Sandro Campos Maia

    2009-01-01

    Full Text Available Foram utilizados dez ovinos da raça Corriedale - cinco machos e cinco fêmeas com pesos entre 52,2 e 87,6 kg - com o objetivo de avaliar o efeito da combinação da movimentação do ar (0 e 5,0 m/s com a temperatura do ar (25, 30 e 40ºC sobre a temperatura retal (T R, ºC, da epiderme (T E, ºC, da superfície do velo (T V, ºC e do interior do velo (T I, ºC e a espessura do velo (E V, cm e suas relações com o isolamento térmico do velo. A presença de vento não teve efeito sobre as variáveis estudadas, o que sugere que fluxo de ar (40ºC o fluxo de calor sensível não foi significativa.Ten Corriedale sheep were evaluated, five males and five females with 52.2 to 87.6 kg of body weight, to evaluate the effect of air velocity (0 and 5 m/s and temperature (25, 30 and 40ºC on rectal temperature (T R, ºC, skin temperature (T E, ºC, fleece surface temperature (T V, ºC, temperature inside the fleece (T I, ºC, and fleece thickness (E V, cm and their relationship with fleece thermal insulation. The results showed that air velocity did not affect the studied traits, suggesting that airflow 40°C, the sensible heat flow was not significant.

  10. Study of physical and tribology properties of soybean oil-based grease formulated with polysoap

    Science.gov (United States)

    Soybean oil-based grease formulated with polysoaps, which was synthesized from polymeric epoxdized soybean oil, was investigated. Greases were prepared using a mixture of lithium soap and triethanolammonium polysoap. Grease properties investigated were: hardness, using cone penetration procedure (AS...

  11. Impact of Water on the Rheology of Lubricating Greases

    NARCIS (Netherlands)

    Cyriac, F.; Lugt, Pieter Martin; Bosman, Rob

    2016-01-01

    The operational life of bearings is often determined by the performance of the lubricating grease. The consistency of the grease prevents it from leaking out of the bearing and provides good sealing properties. The possible ingress of water into the bearing will have a considerable impact not only

  12. The Physical Effects of Contact and Close-Distance Gunfire on Sweatshirt Fleece.

    Science.gov (United States)

    Kusluski, Michael A

    2018-05-01

    Powder stippling caused by the impact of propellant particles during close-distance gunfire has been previously described on skin and solid objects only. Additionally, radial tearing has been described as clear evidence of a contact-distance shot, requiring no further testing. Patterns of discrete perforating holes (referred to here as "stippling perforations") and other physical damage on sweatshirt fleece fabrics were prepared. Using the firearm and ammunition in this study, stippling perforations were observed to a maximum muzzle-to-target distance of 35 cm (10 inches). In addition, radial tearing and disintegration were present (and often more extensive) at greater than contact distance. The presence of stippling perforations could augment muzzle-to-target distance estimates generated using the Griess test, or allow distance estimates when the Griess test is not feasible. Unlike what has been previously reported, testing on the original evidence (or similar substitute) is warranted when physical damage is used to estimate shooting distance. © 2017 American Academy of Forensic Sciences.

  13. Eco-Friendly Multipurpose Lubricating Greases from Vegetable Residual Oils

    Directory of Open Access Journals (Sweden)

    Ponnekanti Nagendramma

    2015-10-01

    Full Text Available Environmentally friendly multipurpose grease formulation has been synthesized by using Jatropha vegetable residual oil with lithium soap and multifunctional additive. The thus obtained formulation was evaluated for its tribological performance on a four-ball tribo-tester. The anti-friction and anti-wear performance characteristics were evaluated using standard test methods. The biodegradability and toxicity of the base oil was assessed. The results indicate that the synthesized residual oil grease formulation shows superior tribological performance when compared to the commercial grease. On the basis of physico-chemical characterization and tribological performance the vegetable residual oil was found to have good potential for use as biodegradable multipurpose lubricating grease. In addition, the base oils are biodegradable and non toxic.

  14. Benzoxazole and Benzothiazole Antirust Greases. Work Unit Directive (WUD) 51

    National Research Council Canada - National Science Library

    Christian, John

    1980-01-01

    ...) and polytetrafluoroethylene (PTFE) thickeners. Testing has shown that one percent concentrations of the additives in the grease formulations provide inhibition against rusting of ferrous metal components under conditions of high humidity...

  15. Research on a lubricating grease print process for cylindrical cylinder

    Science.gov (United States)

    Yang, Liu; Zhang, Xuan; Wang, XianYan; Tan, XiaoYan

    2017-09-01

    In vehicle braking system and clutch system of transmission, there is always a kind of cylindrical component dose reciprocating motion. The main working method is the reciprocating motion between the rubber sealing parts and cylindrical parts, the main factor affects the service life of the product is the lubricating performance of the moving parts. So the lubricating performance between cylinders and rubber sealing rings is particularly important, same as the quality of the grease applies on the surface of the surface of cylinder. Traditional method of manually applying grease has some defects such as applying unevenly, applying tools like brush and cloth easily falls off and affect the cleanness of products, contact skin easily cause allergy, waste grease due to the uncontrollable of grease quantity using in applying, low efficiency of manual operation. An automatic, quantitative and high pressure applying equipment is introduced in this document to replace the traditional manually applying method, which can guarantee the applying quality of the grease which are painted on the surface of cylinder and bring economic benefits to the company.

  16. San Francisco Biofuel Program: Brown Grease to Biodiesel Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Jolis, Domènec [San Francisco Public Utilities Commission, San Francisco, CA (United States); Martis, Mary [San Francisco Public Utilities Commission, San Francisco, CA (United States); Jones, Bonnie [San Francisco Public Utilities Commission, San Francisco, CA (United States); Miot, Alex [San Francisco Public Utilities Commission, San Francisco, CA (United States); Ving, Karri [San Francisco Public Utilities Commission, San Francisco, CA (United States); Sierra, Natalie [San Francisco Public Utilities Commission, San Francisco, CA (United States); Niobi, Morayo [San Francisco Public Utilities Commission, San Francisco, CA (United States)

    2013-03-01

    Municipal wastewater treatment facilities have typically been limited to the role of accepting wastewater, treating it to required levels, and disposing of its treatment residuals. However, a new view is emerging which includes wastewater treatment facilities as regional resource recovery centers. This view is a direct result of increasingly stringent regulations, concerns over energy use, carbon footprint, and worldwide depletion of fossil fuel resources. Resources in wastewater include chemical and thermal energy, as well as nutrients, and water. A waste stream such as residual grease, which concentrates in the drainage from restaurants (referred to as Trap Waste), is a good example of a resource with an energy content that can be recovered for beneficial reuse. If left in wastewater, grease accumulates inside of the wastewater collection system and can lead to increased corrosion and pipe blockages that can cause wastewater overflows. Also, grease in wastewater that arrives at the treatment facility can impair the operation of preliminary treatment equipment and is only partly removed in the primary treatment process. In addition, residual grease increases the demand in treatment materials such as oxygen in the secondary treatment process. When disposed of in landfills, grease is likely to undergo anaerobic decay prior to landfill capping, resulting in the atmospheric release of methane, a greenhouse gas (GHG). This research project was therefore conceptualized and implemented by the San Francisco Public Utilities Commission (SFPUC) to test the feasibility of energy recovery from Trap Waste in the form of Biodiesel or Methane gas.

  17. Use of a Fibrinogen/Thrombin-Based Collagen Fleece (TachoComb, TachoSil) With a Stapled Closure to Prevent Pancreatic Fistula Formation Following Distal Pancreatectomy.

    Science.gov (United States)

    Mita, Kazuhito; Ito, Hideto; Murabayashi, Ryo; Asakawa, Hideki; Nabetani, Masashi; Kamasako, Akira; Koizumi, Kazuya; Hayashi, Takashi

    2015-12-01

    Postoperative pancreatic fistula formation remains a source of significant morbidity following distal pancreatectomy. The aim of this study was to evaluate the rate of clinically significant fistulas (International Study Group on Pancreatic Fistula grade B and grade C) after distal pancreatectomy using a fibrinogen/thrombin-based collagen fleece (TachoComb, TachoSil) with a stapled closure. Seventy-five patients underwent distal pancreatectomy at our institution between January 2005 and March 2014. A fibrinogen/thrombin-based collagen fleece was applied to the staple line of the pancreas before stapling. Twenty-six patients (34.7%) developed a pancreatic fistula, 8 patients (10.7%) developed a grade B fistula, and no patients developed a grade C fistula. The duration of the drain was significantly different in patients with or without a pancreatic fistula (8.0 ± 4.5 vs. 5.4 ± 1.3 days, P = .0003). Histological analysis showed that there was a tight covering with the fibrinogen/thrombin-based collagen fleece. The fibrinogen/thrombin-based collagen fleece (TachoComb, TachoSil) with a stapled closure has low rates of fistula formation and provides a safe alternative to the conventional stapled technique in distal pancreatectomy. © The Author(s) 2015.

  18. Staple line reinforcement with fleece-coated fibrin glue (TachoComb) after thoracoscopic bullectomy for the treatment of spontaneous pneumothorax

    International Nuclear Information System (INIS)

    Muramatsu, Takashi; Ohmori, Kazumitsu; Shimamura, Mie; Furuichi, Motohiko; Takeshita, Shinji; Negishi, Nanao

    2007-01-01

    We investigated the cause of pneumothorax recurrence after thoracoscopic surgery and the effectiveness of staple line reinforcement with fleece-coated fibrin glue (TachoComb) in the prevention of postoperative pneumothorax recurrence. From April 3, 1992 to the end of December 2005, thoracoscopic bullectomy was performed on 499 patients of primary spontaneous pneumothorax. The causes of recurrence were investigated on 39 patients on the basis of surgical observations, preoperative chest computed tomography, and so on. The most common cause was new bulla formation (37 cases), 19 of which were apparently related to the staple line (within 1 cm of the staple lines) and 15 of which were not related to the staple line. After 2000, we stopped using forceps to grasp lungs and we have reinforced the staple line by applying fleece-coated fibrin glue. The staple line reinforced with fleece-coated fibrin glue, or sprayed with fibrin glue solution and the untreated group (bullectomy only with staples) were compared, and the recurrence rates were 1.22%, 7.25%, and 10.00%, respectively (P=0.0006021). The recurrence rate after thoracoscopic bullectomy with fleece-coated fibrin glue was significantly lowered and we consider this procedure to be the treatment of choice for the management of spontaneous pneumothorax. (author)

  19. Film Thickness and Friction Relationship in Grease Lubricated Rough Contacts

    Directory of Open Access Journals (Sweden)

    David Gonçalves

    2017-08-01

    Full Text Available The relationship between the film generation and the coefficient of friction in grease lubricated contacts was investigated. Ball-on-disc tests were performed under different operating conditions: entrainment speed, lubricant temperature and surface roughness. The tests were performed with fully formulated greases and their base oils. The greases were formulated with different thickener types and also different base oils natures and viscosities. Film thickness measurements were performed in ball-on-glass disc tests, and Stribeck curves were measured in ball-on-steel disc tests with discs of different roughness. The role of the thickener and the base oil nature/viscosity on the film thickness and coefficient of friction was addressed and the greases’ performance was compared based on their formulation.

  20. A study of the use of bio-based technologies (lubricant and grease) in rail applications.

    Science.gov (United States)

    2014-05-01

    The objective of the project was to study the efficacy of using bio-based lubricant and grease technologies in railroad applications : (locomotives and maintenance of way equipment). Several commercially available rail curve greases were identified a...

  1. The Impact of Water on the Yield Stress and Startup Torque of Lubricating Greases

    NARCIS (Netherlands)

    Cyriac, F.; Lugt, Pieter Martin; Bosman, Rob

    2017-01-01

    Water is one of the most common contaminants in grease lubrication. There are numerous applications where bearings are susceptible to water ingresses such as in the steel, food, and pulp and paper industries. A grease can absorb water to different degrees depending upon the type of grease. The

  2. Lubricating grease shear flow and boundary layers in a concentric cylinder configuration

    NARCIS (Netherlands)

    Li, J.X.; Westerberg, L.G.; Höglund, E.; Lugt, Pieter Martin; Baart, P.

    2014-01-01

    Grease is extensively used to lubricate various machine elements such as rolling bearings, seals, and gears. Understanding the flow dynamics of grease is relevant for the prediction of grease distribution for optimum lubrication and for the migration of wear and contaminant particles. In this study,

  3. Irradiation effect study on dynamic performance of grease

    International Nuclear Information System (INIS)

    Arakawa, Kazuo; Sasuga, Tsuneo; Hagiwara, Miyuki; Yajima, Toshio; Nakanishi, Hiroshi; Soda, Takao; Iwamoto, Takeshi.

    1986-03-01

    The radiation resistance of newly developed grease, MORESCO HIRAD RG-42-0, consisting of polyphenyl ether as base oil and inorganic compound as gelling agent was evaluated by conducting measurements of frictional resistance force on mechanical snubbers. After the irradiation of 60 Co γ-rays up to a predetermined dose [max. 100 MGy (10000 Mrad)], the grease was applied to mechanical snubbers. The rated load of mechanical snubbers used (standard stroke of 125 mm) was set at 0.16 ton and 1.0 ton. The frictional resistance force was measured at a velocity of 0.001, 0.01, 0.1 and 2.0 mm/sec and at temperature of 60 deg C. When the rated load was 0.16 ton, the frictional resistance force of irradiated grease was kept less than a criterion, a greater value of either 5 kgf or 1 % of the rated load, at every tested dose up to 90 MGy. In case of 1.0 ton, the frictional resistance force of the irradiated grease was less than a greater value of either 10 kgf or 1 % of the rated load at doses up to 70 MGy. (author)

  4. Consistency-dependent optical properties of lubricating grease studied by terahertz spectroscopy

    International Nuclear Information System (INIS)

    Tian Lu; Zhao Kun; Zhou Qing-Li; Shi Yu-Lei; Zhao Dong-Mei; Zhang Cun-Lin; Zhao Song-Qing; Zhao Hui; Bao Ri-Ma; Zhu Shou-Ming; Miao Qing

    2011-01-01

    The optical properties of four kinds of lubricating greases (urea, lithium, extreme pressure lithium, molybdenum disulfide lithium greases) with different NLGL (National Lubricant Grease Institute of America) numbers were investigated using terahertz time-domain spectroscopy. Greases with different NLGL grades have unique spectral features in the terahertz range. Comparison of the experimental data with predictions based on Lorentz—Lorenz theory exhibited that the refractive indices of each kind of lubricating grease were dependent on the their consistency. In addition, molybdenum disulfide (MoS 2 ) as a libricant additive shows strong absorption from 0.2 to 1.4 THz, leading to higher absorption of MoS 2 -lithium grease than that of lithium grease. (general)

  5. Detection of Elemental Composition of Lubricating Grease Using Laser Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    Cherry Dhiman

    2014-12-01

    Full Text Available The elemental composition of lubricating soft grease used in rail engines are studied using laser induced breakdown spectroscopy (LIBS technique. LIBS spectra of fresh, partially used and fully used grease samples are recorded using time-gated ICCD spectrometer for verification of compositional degradation of the used grease. LIBS spectra of grease samples are analyzed by comparing with emission spectra of elements published by NIST standard database. Many spectral lines of impurity elements like Fe, Cu, Ba, Mg, Mn, Ni, S, Zn, Si, Pb, Ti, Ca and Al present in the grease in ppm or ppb level in trace level concentrations are observed in excess in the used grease mainly due to wear and tear. On the other hand in fresh grease, spectral lines of Ca, Al and Na are observed predominantly.

  6. Study on thermal effects & sulfurized additives, in lubricating greases

    Science.gov (United States)

    Shah, Ami Atul

    Lithium Base grease constitutes about 50% of market. The greases are developed to be able to work in multiple working conditions and have longer working life. Greases with extreme pressure additives and anti-wear additives have been developed as a solution to many of the applications. These developed greases are tested under ASTM D2266 testing conditions to meet the requirements. The actual working conditions, although, differ than the real testing conditions. The loading, speed and temperature conditions can be more harsh, or fluctuating in nature. The cyclic nature of the parameters cannot be directly related to the test performance. For this purpose studies on the performance under spectrum loading, variable speed and fluctuating temperature must be performed. This study includes tests to understand the effect of thermal variation on some of the most commonly used grease additives that perform well under ASTM D2266 testing conditions. The studied additives include most widely used industrial extreme pressure additive MoS2. Performance of ZDDP which is trying to replace MoS2 in its industrial applications has also been studied. The tests cover study of extreme pressure, anti-wear and friction modifier additives to get a general idea on the effects of thermal variation in three areas. Sulphur is the most common extreme pressure additive. Sulphur based MoS 2 is extensively used grease additive. Study to understand the tribological performance of this additive through wear testing and SEM/EDX studies has been done. This performance is also studied for other metallic sulfides like WS2 and sulphur based organic compound. The aim is to study the importance of the type of bond that sulphur shares in its additive's structure on its performance. The MoS2 film formation is found to be on the basis of the FeS formation on the substrate and protection through sacrificial monolayer deposition of the MoS2 sheared structure. The free Mo then tends to oxidise. An attempt to

  7. Friction torque in thrust ball bearings grease lubricated

    Science.gov (United States)

    Ianuş, G.; Dumitraşcu, A. C.; Cârlescu, V.; Olaru, D. N.

    2016-08-01

    The authors investigated experimentally and theoretically the friction torque in a modified thrust ball bearing having only 3 balls operating at low axial load and lubricated with NGLI-00 and NGLI-2 greases. The experiments were made by using spin-down methodology and the results were compared with the theoretical values based on Biboulet&Houpert's rolling friction equations. Also, the results were compared with the theoretical values obtained with SKF friction model adapted for 3 balls. A very good correlation between experiments and Biboulet_&_Houpert's predicted results was obtained for the two greases. Also was observed that the theoretical values for the friction torque calculated with SKF model adapted for a thrust ball bearing having only 3 balls are smaller that the experimental values.

  8. The potential of restaurant trap grease as biodiesel feedstock

    Directory of Open Access Journals (Sweden)

    Parichart Hasuntree

    2011-10-01

    Full Text Available The possibility of using restaurant trap grease as feedstock in the production of biodiesel via acid catalyzed esterificationis explored in this study. Sulfuric acid was used as a catalyst for the esterification reaction of free fatty acid (FFA andmethanol. The FFA levels of restaurant trap greases were reduced from 60.38±2.22 mg KOH/g to 11.60±1.60 mgKOH/g whenconditions for biodiesel production are as follow: methanol-to-FFA ratio of 5:1, 5 wt.% H2SO4, and a reaction temperature at60°C with a reaction time of 60 min. During the acid-catalyzed esterification, the percentage of methyl esters resulting fromconversion of FFA in the obtained product was 83.59±1.51% based on the result of 1H NMR analysis. Data obtained from the23 full factorial designs revealed that methanol-to-FFA ratio term had the most significant effect on the percentage of methylesters, followed by the H2SO4 concentration. Conversely, reaction time between 1 and 3 hours had no significant effect on theesterification of trap greases.

  9. Separation of oil and grease from oil sludge using surfactant

    International Nuclear Information System (INIS)

    Ainon Abdul Aziz; Syed Hakimi Sakuma Syed Ahmad; Zalina Laili

    2005-01-01

    The objective of the experiments was to observe the efficiency of the surfactant to remove oil and grease from oil sludges using various surfactant concentration ranging from 10 %, 15 %, 20 % and 30 %. The surfactant solution consists of two mixtures of Aqua 2000 and D Bond. The oil sludge were subjected to heating and surfactant treatment process. Remaining oil and grease concentration were observed on the oil sludges after treatment. Small scale experiments were conducted by heating process, without heating process and heating process with addition of sodium chloride. Surfactant solution was added in each process. Results shows that there is separation of oil and grease from the oil sludges. There were formation of mini emulsions (oil in water). The higher the concentration of surfactant used, the higher the concentrations of mini emulsion formed as observed. Solid remains after the treatment process were found to contain lesser oil concentration with presence of bitumen, sediment, organic and inorganic materials. After a washing process using distilled water, the solid was still black but less oily than before the treatment. There is no separation of oil occurred in aqueous solution for the control experiment. (Author)

  10. Two fossil species of Metrosideros (Myrtaceae) from the Oligo-Miocene Golden Fleece locality in Tasmania, Australia.

    Science.gov (United States)

    Tarran, Myall; Wilson, Peter G; Macphail, Michael K; Jordan, Greg J; Hill, Robert S

    2017-06-01

    The capsular-fruited genus Metrosideros (Myrtaceae) is one of the most widely distributed flowering plant genera in the Pacific but is extinct in Australia today. The center of geographic origin for the genus and the reason for and timing of its extinction in Australia remain uncertain. We identify fossil Metrosideros fruits from the newly discovered Golden Fleece fossil flora in the Oligo-Miocene of Tasmania, Australia, shedding further light on these problems. Standard paleopalynological techniques were used to date the fossil-bearing sediments. Scanning electron microscopy and an auto-montage camera system were used to take high-resolution images of fossil and extant fruits taken from herbarium specimens. Fossils are identified using a nearest-living-relative approach. The fossil-bearing sediments are palynostratigraphically dated as being Proteacidites tuberculatus Zone Equivalent (ca. 33-16 Ma) in age and provide a confident Oligo-Miocene age for the macrofossils. Two new fossil species of Metrosideros are described and are here named Metrosideros dawsonii sp. nov. and Metrosideros wrightii sp. nov. These newly described fossil species of Metrosideros provide a second record of the genus in the Cenozoic of Australia, placing them in the late Early Oligocene to late Early Miocene. It is now apparent not only that Metrosideros was present in Australia, where the genus is now extinct, but that at least several Metrosideros species were present during the Cenozoic. These fossils further strengthen the case for an Australian origin of the genus. © 2017 Botanical Society of America.

  11. Application of a Thermodynamic Concept for the Analysis of Structural Degradation of Soap Thickened Lubricating Greases

    Directory of Open Access Journals (Sweden)

    Erik Kuhn

    2018-01-01

    Full Text Available Lubricating greases are special lubricants with a wide range of application. The tribologically stressed grease is used as tribological system and finally modeled as an open thermodynamic system. This study investigated the phenomenon of self-optimization and applied to the process of shearing a grease. The conditions for self-optimization and the consequences of created dissipative structures are investigated according to the interpreted literature.

  12. Non-genetic factors influencing growth and fleece traits in Afrino sheep

    African Journals Online (AJOL)

    Since selection in Afrino sheep is partially based on body weights ... The offi- cial grazing capacity is 5.5 ha/small stock unit. Animals ..... Selection criteria for intensive market lamb poduction: Growth traits. J. Anim. 5ci.43,78-89. SCHOEMAN, S.i., 1990. Production parameters for Dohne Merino sheep under an accelerated ...

  13. Case study of the effectiveness of passive grease trap for management on domestic kitchen waste water

    Science.gov (United States)

    Nidzamuddin, M. Y.; Juffrizal, K.; Mustapha, F.; Zulfattah, Z. M.; Tan, C. F.; Taha, M. M.; Hidayah, I.; Hilwa, M. Z.

    2015-05-01

    Household waste, generally known as trash or garbage is mostly includes food wastes, product packaging, and other miscellaneous inorganic wastes that are coming from domestic household. Grease waste such as oil and fats can contaminate water and also clot on pipes provoking blockages. Thus, waste water from kitchen sink need a proper way of filtration. Grease trap developed in this paper is viable in trapping the grease residue. The experiments have been conducted in controlled environment and the objectives are to investigate the effectiveness of grease trap by proving the existence of retention time and the expected ratio of collected water and oil during experiment process using a prototype model.

  14. Effect of polysoap on physical and tribology properties of soybean oil-based grease

    Science.gov (United States)

    The overall objective of this work was to evaluate the evolution of soybean oil based grease containing polysoaps made from polymeric epoxdized soybean oil. With this aim, lubricating greases were prepared from a mixed soap comprising lithium soap and triethanol ammonium polysoap synthesized from so...

  15. Removal of oil, grease, and suspended solids from produced water with ceramic crossflow microfiltration

    International Nuclear Information System (INIS)

    Chen, A.S.C.; Flynn, J.T.; Cook, R.G.; Casaday, A.L.

    1991-01-01

    In this paper results of studies of two onshore and two offshore pilot plants that use ceramic crossflow microfiltration (CCFM) to separate oil, grease, and suspended solids from produced water are discussed. The method is capable of producing permeate quality with < =5 mg/L (detection limit) of dispersed oil and grease and <1 mg/L of suspended solids

  16. Tribological Performance of Some Pennzane(Registered Trademark) Based Greases for Vacuum Applications

    Science.gov (United States)

    Marchetti, Mario; Jones, William R., Jr.; Street, Kenneth W.; Wheeler, Donald; Dixon, Duane; Jansen, Mark J.; Kimura, Hiroshi

    2002-01-01

    Commercial greases for space applications usually fulfill the requirements imposed by the severe conditions of use. The main requirement is their ability to create an EHL film, boundary film, or both under speed, load and temperature conditions that the mechanisms will operate. Three greases, all based on a multiply alkylated cyclopentane (Pennzan(R)) base oil, were studied. The thickeners were an n-octadecylterephthalamate soap, a lithium soap, and a urea derivative. A Four-Ball Tribometer and a Spiral Orbit Tribometer were employed to evaluate the greases under ultrahigh vacuum. Results indicated that all three greases yielded very low wear rates and extended lifetimes. In addition, routine physical property data is reported for each grease.

  17. Accelerated Testing of UH-60 Viscous Bearings for Degraded Grease Fault

    Science.gov (United States)

    Dykas, Brian; Hood, Adrian; Krantz, Timothy; Klemmer, Marko

    2015-01-01

    An accelerated aging investigation of critical aviation bearings lubricated with MIL-PRF- 81322 grease was conducted to derive an understanding of the mechanisms of grease degradation and loss of lubrication over time. The current study focuses on UH-60 Black Hawk viscous damper bearings supporting the tail rotor driveshaft, which were subjected to more than 5800 hours of testing in a heated environment to accelerate the deterioration of the grease. The mechanism of grease degradation is a reduction in the oil/thickener ratio rather than the expected chemical degradation of grease constituents. Over the course of testing, vibration and temperature monitoring of bearings was conducted and trends for failing bearings are presented.

  18. BAURAN PEMASARAN PRODUK BARU PELUMAS FOOD GRADE GREASE BERBAHAN DaSAR MINYAK SAWIT

    Directory of Open Access Journals (Sweden)

    Ali Maksum

    2016-12-01

    Full Text Available Grease with food grade specification is essentially required on food processing production activities.  The purpose of this study is to develop a new product marketing mix for food grade grease, i.e 1 product priority, 2 pricing priority, 3 distribution priority and 4 advertising priority. This Research was conducted in Sub District Purbalingga and Padamara, Purbalingga regency with respondent SMEs food processing. Analysis of the determination of marketing mix that includes product, price, advertising and distribution using the Analytical Hierarchy Process (AHP. Sampling was purposive random sampling method with a population of 64 SMEs so drawn sample of 20 respondents. Result of the study showed the marketing mix priority which were: (1 advertising priority for the new food grade grease product with an ads that could attract the attention of consumers in order to made the consumers interested, tried, and bought the new food grade lubricating grease products. (2 Price priority for the new food grade grease products which was by determining the moderate prices to compete the competitors' prices while still maintained a high quality. (3 Product priority for new food grade grease product which was producing a qualified product which could withstand the wear of the engine, green colour of the product, a 350 g size packs with a rectangular shape packaging labels. (4 Distribution priority for the new food grade grease product which was a short distribution channels through mobile vendors so that the consumers were able to save costs, and got the product fast and easily

  19. Some azine and azole derivatives as antioxidant additives for lithium lubricating grease

    Directory of Open Access Journals (Sweden)

    Reda M. Fikry

    2013-06-01

    The structure of these compounds has been confirmed using elemental analysis, nuclear magnetic resonance and infrared spectroscopy. On the other hand, lithium lubricating grease was prepared and evaluated according to the National Lubricating Grease Institute (NLGI and Egyptian Standard (ES. The antioxidant compounds were tested for the prepared grease with concentration 0.1 wt.%. The efficiency of these compounds has been determined using total acid number. It was found that the prepared lithium grease resists oxidation reaction in the presence of these compounds. A correlation between the chemical structure of these compounds and their efficiency as antioxidants additives was discussed. Data showed that the efficiency of these compounds as antioxidants decreases in the order: compound I > compound II > compound III.

  20. The processing of used cooking oil (yellow grease) using combination of adsorption and ultrafiltration membrane processes

    Science.gov (United States)

    Rosnelly, C. M.; Sofyana; Amalia, D.; Sarah, S.

    2018-03-01

    Yellow grease is used cooking oil whose quality has degraded due to the oxidation, polymerization, or hydrolysis process. In previous studies, yellow grease refining had been conducted either by adsorption or by using membrane. In this study, adsorption process using adsorbent from bagasse activated with H3PO4 12.5%, and ultrafiltration using Polyethersulfone (PES) membrane were combined. In adsorption stage, several variation of bagasse mass was fed into 200 ml of yellow grease and stirred for 60 minutes at 60 rpm. Yellow grease produced from adsorption with best condition was then processed using ultrafiltration membran that is PES membran with concentration by 15 wt % with transmembrane pressure variation by 0.5; 1; 1.5; 2; and 2.5 Bar. Analysis of yellow grease characteristics before refined showed its acid number, peroxide number, iodine number, and water content respectively by 2.68 mgKOH/Kg; 5.97 Meq/Kg; 51,48; and 1.29%. Characteristics of yellow grease after adsorption at its best condition on the parameters of acid number, peroxide number, iodine number, and water content are respectively by 2.55 mgKOH/Kg; 4.19 Meq/Kg; 40,02; and 0.27%. Characteristics of yellow grease after ultrafiltration at its best condition on the parameters of acid number, peroxide number, iodine number, and water content are respectively by 1.12 mgKOH/Kg; 1.8 Meq/Kg; 41,36; and 0.02%. Combination of adsorption and ultrafiltration processes for yellow grease processing showed decreasing value on the parameters of acid number, peroxide number, and water content that conforms to the SNI quality standard, but has not been able to increase the iodine number.

  1. Radioisotope studies on the paradox in dispersion and agglomeration of sewage greases discharged from ocean outfalls

    International Nuclear Information System (INIS)

    Davison, A.; Easy, J.F.; Seatonberry, B.W.

    1981-04-01

    Experiments have been undertaken in the ocean off Sydney, Australia to monitor the movement and the dispersion of sewage solids. These solids were labelled with a radioisotope, gold-198 prior to ocean discharge. The labelled material was followed at sea using submersible scintillation detectors. Lateral and vertical dispersion coefficients were determined. The experiments showed that under some conditions the labelled sewage grease dispersed and under others the grease agglomerated. This variation is explained in terms of non-conservative processes

  2. Fat, oil and grease reduction in commercial kitchen ductwork: a novel biological approach

    OpenAIRE

    Mudie, S.; Vahdati, Maria

    2017-01-01

    Recent research has characterised emissions upon cooking a variety of foods in a commercial catering environment in terms of volume, particle size and composition. However, there has been limited focus on the deposition of solid grease in commercial kitchen ductwork, the sustainability of these systems and their implications on the heat recovery potential of kitchen ventilation extract air.\\ud \\ud This paper reviews the literature concerning grease, commonly referred to as Fat, Oils and Greas...

  3. Fats, oils, and grease : options for plant-level treatment of a national problem

    Energy Technology Data Exchange (ETDEWEB)

    Miles, E.; Scherffius, B. [EcoPlus Inc. Charlotte, NC (United States)

    2007-09-15

    Fats, oils, and grease from restaurants and homes can congeal in sewers and result in damaging runoff into rivers and streams. A growing number of food service establishments are now producing increasing amounts of a specific grease product called brown grease, which is sticky and difficult to remove. Regulations now require haulers to remove the waste and dispose of it. However, many local treatment plants cannot accept or dispose of the amounts of grease currently being produced. A total of volume of 3 to 10 billion gallons per year of contaminated water have been accidentally discharged from sanitary sewers as a result of brown grease accumulations. This paper provided details of the EcoPlus Final Treatment Facility, which can be set up at waste water treatment plants and is able to process brown grease and discharge supernatant water from its process back into city sewers. The EcoPlus process produces 2 waste streams: (1) a low strength aqueous solution that can be disposed of in a sanitary sewer tap; and (2) a granular material that can be disposed of in a landfill for use as a soil conditioner. It was concluded that the granular material can also be used facilitate the incineration of sewage sludge, or burned as an alternative green fuel for power generation. 4 figs.

  4. Design and application on experimental platform for high-speed bearing with grease lubrication

    Directory of Open Access Journals (Sweden)

    He Qiang

    2015-12-01

    Full Text Available The experimental platform for high-speed grease is an important tool for research and development of high-speed motorized spindle with grease lubrication. In this article, the experimental platform for high-speed grease is designed and manufactured which consists of the drive system, the test portion, the loading system, the lubrication system, the control system, and so on. In the meantime, the high-speed angular contact ceramic ball bearings B7005C/HQ1P4 as the research object are tested and contrasted in the grease lubrication and oil mist lubrication. The experimental platform performance is validated by contrast experiment, and the high-speed lubricated bearing performance is also studied especially in the relationship among the rotating speed,load and temperature rise. The results show that the experimental platform works steadily, accurate, and reliable in the experimental testing. And the grease lubrication ceramic ball bearings B7005C/HQ1P4 can be used in high-speed motorized spindle in the circular water cooling conditions when the rotating speed is lower than 40,000 r/min or the DN value (the value of the bearing diameter times the rotating speed is lower than the 1.44 × 106 mm r/min. Grease lubrication instead of oil mist lubrication under high-speed rotating will simplify the structure design of the high-speed motorized spindle and reduce the pollution to the environment.

  5. Grease Cowboy Fever; or, the making of Johnny T.

    Science.gov (United States)

    Bradford, K

    2002-01-01

    Through a mix of theory, memoir and performance narrative, this chapter examines the making of drag persona Johnny T. as part of a king movement where the dominant cultural paradigm of gender is reconsidered and remastered. As seen in Grease, Saturday Night Fever and Urban Cowboy, pop culture icon John Travolta's particular blend of 50s greaser, faggy 70s disco, and 80s country masculinities are shown to be prime drag king conditions, particularly for a dyke who came of age during the 70s Travolta fever. While drawing from personal experience as a king, current trends in the king movement, and gender theory, this essay calls into question the lines between performing masculinity on and off the stage, inviting us to see both the work and play, the parody and realness, the struggle and liberation that make up the transgressive world of drag kinging and gender variance. Drawing upon gender theorists Judith Butler and Judith Halberstam, gender is exposed as a social construction both produced and performed, and as such, drag kinging is framed as an arena where gender is reconfigured.

  6. Quantifying fat, oil, and grease deposit formation kinetics.

    Science.gov (United States)

    Iasmin, Mahbuba; Dean, Lisa O; Ducoste, Joel J

    2016-01-01

    Fat, oil, and grease (FOG) deposits formed in sanitary sewers are calcium-based saponified solids that are responsible for a significant number of nationwide sanitary sewer overflows (SSOs) across United States. In the current study, the kinetics of lab-based saponified solids were determined to understand the kinetics of FOG deposit formation in sewers for two types of fat (Canola and Beef Tallow) and two types of calcium sources (calcium chloride and calcium sulfate) under three pH (7 ± 0.5, 10 ± 0.5, and ≈14) and two temperature conditions (22 ± 0.5 and 45 ± 0.5 °C). The results of this study displayed quick reactions of a fraction of fats with calcium ions to form calcium based saponified solids. Results further showed that increased palmitic fatty acid content in source fats, the magnitude of the pH, and temperature significantly affect the FOG deposit formation and saponification rates. The experimental data of the kinetics were compared with two empirical models: a) Cotte saponification model and b) Foubert crystallization model and a mass-action based mechanistic model that included alkali driven hydrolysis of triglycerides. Results showed that the mass action based mechanistic model was able to predict changes in the rate of formation of saponified solids under the different experimental conditions compared to both empirical models. The mass-action based saponification model also revealed that the hydrolysis of Beef Tallow was slower compared to liquid Canola fat resulting in smaller quantities of saponified solids. This mechanistic saponification model, with its ability to track the saponified solids chemical precursors, may provide an initial framework to predict the spatial formation of FOG deposits in municipal sewers using system wide sewer collection modeling software. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Removal of oil and grease from automobile garage wastewater using electrocoagulation

    Science.gov (United States)

    Manilal, A. M.; Harinarayanan Nampoothiri, M. G.; Soloman, P. A.

    2017-06-01

    Wastewater from automobile garages and workshops is an important contributor to the water pollution. Oil and grease is one of the major content of wastewater from vehicle garages. Wastewater from a public transport depot at Thrissur district in Kerala, India was collected for the study. A batch reactor has been devised to assess the efficacy of electrocoagulation in removing oil and grease from the wastewater. Aluminium and iron were tested as the anode material with stainless steel as cathode. Experiments were conducted to investigate the effect of various operating parameters such as current density, pH, time and salt concentration on oil and grease removal. The results shown that aluminium is superior to iron in removing the oil and grease from the wastewater. The reactor with aluminium as anode was able to remove 90.8 % of the oil and grease at a current density of 0.6 A/dm2 in 15 minutes. The calculated specific energy consumption is also less for aluminium in comparison with iron.

  8. An Electrochemical Processing Strategy for Improving Tribological Performance of Aisi 316 Stainless Steel Under Grease Lubrication

    Science.gov (United States)

    Zou, Jiaojuan; Li, Maolin; Lin, Naiming; Zhang, Xiangyu; Qin, Lin; Tang, Bin

    2014-12-01

    In order to improve the tribological performance of AISI 316 stainless steel (316 SS) under grease lubrication, electrochemical processing was conducted on it to obtain a rough (surface texturing-like) surface by making use of the high sensitivity of austenitic stainless steel to pitting corrosion in Cl--rich environment. Numerous corrosion pits or micro-ditches acted as micro-reservoirs on the obtained surface. While the grease could offer consistent lubrication, and then improve the tribological performance of 316 SS. Tribological behaviors of raw 316 SS and the treated sample were measured using a reciprocating type tribometer sliding against GCr15 steel counterpart under dry and grease lubrication conditions. The results showed that the mass losses of the two samples were in the same order of magnitude, and the raw sample exhibited lower friction coefficient in dry sliding. When the tests were conducted under grease lubrication condition, the friction coefficients and mass losses of the treated sample were far lower than those of the raw 316 SS. The tribological performance of 316 SS under grease lubrication was drastically improved after electrochemical processing.

  9. The Field-Dependent Rheological Properties of Magnetorheological Grease Based on Carbonyl-Iron-Particles

    Science.gov (United States)

    Mohamad, N.; Mazlan, S. A.; Ubaidillah; Choi, Seung-Bok; Nordin, M. F. M.

    2016-09-01

    This paper presents dynamic viscoelastic properties of magnetorheological (MR) grease under variation of magnetic fields and magnetic particle fractions. The tests to discern the field-dependent properties are undertaken using both rotational and oscillatory shear rheometers. As a first step, the MR grease is developed by dispersing the carbonyl iron (CI) particles into grease medium with a mechanical stirrer. Experimental data are obtained by changing the magnetic field from 0 to 0.7 T at room temperature of 25 °C. It is found that a strong Payne effect limits the linear viscoelastic region of MR grease at strains above 0.1%. The results exhibit a high dynamic yield stress which is equivalent to Bingham plastic rheological model, and show relatively good MR effect at high shear rate of 2000 s-1. In addition, high dispersion of the magnetic particles and good thermal properties are proven. The results presented in this work directly indicate that MR grease is a smart material candidate that could be widely applicable to various fields including vibration control.

  10. Influence of Base Oil Polarity on the Transient Shear Flow of Biodegradable Lubricating Greases

    Directory of Open Access Journals (Sweden)

    Martin Fiedler

    2015-09-01

    Full Text Available The scope of this study is to elucidate the physical mechanisms influencing the transient flow behavior of lubricating greases based on biogenic oleochemicals from a polarity point of view. This includes the mutually interacting influence of base oil polarity and thickening agents on the rheologically-measured mechanical structural degradation in transient shear flow. Due to the high temperature dependence of Keesom forces in the background of polar-active bond mechanisms, the analysis of the transient flow response as a function of temperature allows to attribute the observed influences to differences in base oil polarity. In general, clay-thickened greases show a greater tendency to be rheologically influenced by base oil polarities than soap-thickened lubricating greases.

  11. Rheological Behavior of Carbon Nanotubes as an Additive on Lithium Grease

    Directory of Open Access Journals (Sweden)

    Alaa Mohamed

    2013-01-01

    Full Text Available The rheological behaviors of carbon nanotubes (CNTs as an additive on lithium grease at different concentrations were examined under various settings of shear rate, shear stress, and apparent viscosity. The results indicated that the optimum content of the CNTs was 2%. These experimental investigations were evaluated with a Brookfield Programmable Rheometer DV-III ULTRA. The results indicated that the shear, stress and apparent viscosity increase with the increase of CNTs concentration. The microstructure of CNTs and lithium grease was examined by high resolution transmission electron microscope (HRTEM and scanning electron microscope (SEM. The results indicated that the microscopic structure of the lithium grease presents a more regular and homogeneous network structure, with long fibers, which confirms the rheological stability.

  12. Rheological Behavior of Carbon Nano tubes as an Additive on Lithium Grease

    International Nuclear Information System (INIS)

    Mohamed, A.; Zaki, M.; Mohamed, A.; Khattab, A.A.; Osman, T.A.

    2013-01-01

    The rheological behaviors of carbon nano tubes (CNTs) as an additive on lithium grease at different concentrations were examined under various settings of shear rate, shear stress, and apparent viscosity. The results indicated that the optimum content of the CNTs was 2%. These experimental investigations were evaluated with a Brookfield Programmable Rheometer DV-III ULTRA. The results indicated that the shear, stress and apparent viscosity increase with the increase of CNTs concentration. The microstructure of CNTs and lithium grease was examined by high resolution transmission electron microscope (HRTEM) and scanning electron microscope (SEM). The results indicated that the microscopic structure of the lithium grease presents a more regular and homogeneous network structure, with long fibers, which confirms the rheological stability.

  13. Physico-chemical characterization of grease interceptors with and without biological product addition.

    Science.gov (United States)

    He, Xia; Osborne, Jason; de los Reyes, Francis L

    2012-03-01

    Hardened and insoluble fat, oil, and grease (FOG) deposits are the primary cause of sewer line blockages leading to sanitary sewer overflows (SSOs). However, there have been very few long-term assessments of the physico-chemical characteristics of full-scale grease interceptors (GIs), the first "line of defense" against FOG buildup in sewer lines. In this study, we assessed the physico-chemical characteristics of two full-scale GIs (at a restaurant and a retirement community kitchen) over a one-year period. Statistically significant differences between bioaugmented and untreated cycles were detected for several chemical and physical properties. The treated cycles had lower BOD and COD at the grease interceptor outlet. While the combined data for all treated cycles did not show lower FOG concentrations in the GI outlet compared to the combined data for all untreated cycles, comparison of specific individual treated and untreated cycles show a positive effect due to the addition of product.

  14. Rheological Properties of Extreme Pressure Greases Measured Using a Process Control Rheometer

    DEFF Research Database (Denmark)

    Glasscock, Julie; Smith, Robin S.

    2012-01-01

    A new process control rheometer (PCR) designed for use in industrial process flows has been used to measure the rheological properties of three extreme-pressure greases. The rheometer is a robust yet sensitive instrument designed to operate in an industrial processing environment in either in......-line or on-line configurations. The PCR was able to measure the rheological properties including the elastic modulus, viscous modulus, and complex viscosity of the greases which in an industrial flow application could be used as variables in a feedback system to control the process and the quality...

  15. Enhancement of biogas production from sewage sludge by addition of grease trap sludge

    International Nuclear Information System (INIS)

    Grosser, A.; Neczaj, E.

    2016-01-01

    Highlights: • Addition of grease trap sludge is interesting option for sewage sludge digestion. • Co-digestion of grease trap sludge and sewage sludge improved efficiency of process. • The anaerobic digestion can be carried out at short hydraulic retention time. • Long chain fatty acids concentration was below the ranges for inhibition of anaerobic digestion. - Abstract: Despite having many benefits, a low degree of volatile solids removal as well as long retention time are the main factors limiting the performance of the anaerobic digestion. Co-digestion of sewage sludge with other organic waste (for example fat rich materials) is one of the few potential ways to enhance the performance of the anaerobic digestion. In this article, the effects of adding fatty rich materials on the performance and stability of semi-continuous anaerobic digestion of sewage sludge were investigated on a 6 l laboratory-scale reactor (working volume equal to 5.5 l). The reactor was operated in a semi-continuous mode with a hydraulic retention time of 10 days. The data presented in this paper relate to the period in which the grease trap sludge accounted for 10, 12, 14, 16 and 18% of the mixture on the volatile solids basis. The results clearly indicate that the addition of fat rich materials like grease trap sludge can lead to a satisfactory increase in biogas yield in digester treating sewage sludge. The results showed that co-digestion can enhance the biogas yield by 28–82% compared to anaerobic digestion of sewage sludge alone (control sample). Moreover, the addition of grease trap sludge to digesters resulted in increased volatile solids removal from 44.38% (control sample) to 57.77% (feedstock with 14% addition of grease trap sludge). It was found that the increase of grease trap sludge in the feedstock had a direct impact on the biogas production and methane yield. This proposal has also been confirmed by statistical analysis such as Pearson correlation coefficients and

  16. Design of the GLARE tool. A grease lubrication apparatus for research and education

    International Nuclear Information System (INIS)

    Rawlings, B.

    2012-01-01

    The GLARE: Grease Lubrication Apparatus for Research and Education was designed as a fourth year thesis project with the University of Ontario Institute of Technology (UOIT). The purpose of the apparatus is to train Ontario Power Generation Nuclear (OPGN) staff to properly lubricate bearings with grease and to help detect early equipment failures. Proper re-lubrication is critical to the nuclear industry as equipment may be inaccessible for long periods of time. A secondary purpose for the tool is for UOIT research and undergraduate laboratories.This abstract provides an overview of the project and its application to the nuclear industry. (author)

  17. Preliminary research on measuring grease in petroleum pipeline using fast neutron transmission method

    International Nuclear Information System (INIS)

    Liu Qingwei; Liu Shengkang; Zhang Zhiping; Ding Xiaoping

    2006-01-01

    The principle, experiment and conclusion on the grease stain measurement using fast neutron are reported. The experiment equipment consist of 241 Am-Be fast neutron source, ZnS detector and BH1224 multichannel spectrometer. Paraffin is used instead of real grease stain. Steel plates are used instead of pipeline. The results of the experiment indicate that there is a good linearship between the logarithm of the reciprocal of the neutron transmissivity and the paraffin thickness. The measuring accuracy of the paraffin thickness is 0.6 mm in this experiment. (authors)

  18. 40 CFR 761.375 - Specific requirements for surfaces coated or covered with dust, dirt, grime, grease, or another...

    Science.gov (United States)

    2010-07-01

    ... coated or covered with dust, dirt, grime, grease, or another absorbent material. 761.375 Section 761.375... coated or covered with dust, dirt, grime, grease, or another absorbent material. (a) First wash. Cover..., absorbent pad until the surface appears dry. This cleaning should remove any residual dirt, dust, grime, or...

  19. Use of Bio-Amp, a commercial bio-additive for the treatment of grease trap wastewater containing fat, oil, and grease.

    Science.gov (United States)

    Tang, Hao L; Xie, Yuefeng F; Chen, Yen-Chih

    2012-11-01

    This research investigated the application of Bio-Amp, a commercial bio-additive for the treatment of fat, oil, and grease (FOG) in a grease trap, and evaluated potential impacts of treated effluent on downstream collection system and treatment processes. Results show that after Bio-Amp treatment, FOG deposit formation was reduced by 40%, implicating a potential reduction of sewer line blockages. Chemical oxygen demand (COD), total nitrogen (TN), total phosphorus (TP) and total fatty acids were reduced by 39%, 33%, 56%, and 59%, respectively, which represents an overall loading reduction of 9% COD, 5% TN and 40% TP received by the treatment plant from all the dining halls. On the other hand, readily biodegradable COD fractions significantly increased, which implies a potential improvement on Bio-P removal. Overall, the results showed that application of Bio-Amp in grease trap provides potential reduction of sewer line blockages, and can also alleviate downstream treatment burden. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Estimation of modes frictions and greasing in bearing axial hanging of locomotives

    Directory of Open Access Journals (Sweden)

    V.N. Аstаkhоv

    2012-04-01

    Full Text Available Dependence is considered between the size of relative diametral gap and descriptions of work of the motor-axial bearing on the different rates of movement of diesel engine: by the type of the mode of greasing, thickness lubricating layer, by the coefficient of friction and intensity of wear.

  1. 9 CFR 316.15 - Marking outside containers of inedible grease, etc.

    Science.gov (United States)

    2010-01-01

    ... grease, etc. 316.15 Section 316.15 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... letters not less than 2 inches high, while on tank cars and tank trucks the letters shall be not less than 4 inches high. (b) Inspected rendered animal fat which is intended not to be used for human food may...

  2. On the normal stress effect in grease-lubricated bearing seals

    NARCIS (Netherlands)

    Baart, P.; Lugt, Pieter Martin; Prakash, B.

    2014-01-01

    The film formation in lip seals, due to the non-Newtonian rheology of the lubricant, has been a topic of speculation. Earlier work suggests that normal stresses in grease would be favorable for the film buildup between the seal lip and shaft or bearing ring. In the current article, we evaluate this

  3. Effects of Atomic Oxygen and Grease on Outgassing and Adhesion of Silicone Elastomers for Space Applications

    Science.gov (United States)

    de Groh, Henry C.; Puleo, Bernadette J.; Steinetz, Bruce M.

    An investigation of silicone elastomers for seals used in docking and habitat systems for future space exploration vehicles is being conducted at NASA. For certain missions, NASA is considering androgynous docking systems where two vehicles each having a seal would be required to: dock for a period of time, seal effectively, and then separate with minimum push-off forces for undocking. Silicone materials are generally chosen for their wide operating temperatures and low leakage rates. However silicone materials are often sticky and usually exhibit considerable adhesion when mated against metals and silicone surfaces. This paper investigates the adhesion unit pressure for a space rated silicone material (S0383-70) for either seal-on-seal (SoS) or seal-on-aluminum (SoAl) operation modes in the following conditions: as-received, after ground-based atomic-oxygen (AO) pre-treatment, after application of a thin coating of a space-qualified grease (Braycote 601EF), and after a combination of AO pre-treatment and grease coating. In order of descending adhesion reduction, the AO treatment reduced seal adhesion the most, followed by the AO plus grease pre-treatment, followed by the grease treatment. The effects of various treatments on silicone (S0383-70 and ELA-SA-401) outgassing properties were also investigated. The leading adhesion AO pre-treatment reduction led to a slight decrease in outgassing for the S0383-70 material and virtually no change in ELA-SA-401 outgassing.

  4. On a new method to determine the yield stress in lubricating grease

    NARCIS (Netherlands)

    Cyriac, F.; Lugt, Pieter Martin; Bosman, Rob

    2015-01-01

    An experimental study using both a controlled stress and a controlled strain rheometer has been undertaken to characterize lubricating grease in shear, creep, stress relaxation, and oscillatory flow, with a main focus on determining the yield stress. The yield stress was examined using a cone–plate

  5. Physical simulation technique on the behaviour of oil spills in grease ice under wave actions

    International Nuclear Information System (INIS)

    Li, Z.; Hollebone, B.; Fingas, M.; Fieldhouse, B.

    2008-01-01

    Light or medium oil spilled on ice tends to rise and remain the surface in unconsolidated frazil or grease ice. This study looked for a new system for studying the oil emulsion in grease ice under experimental conditions. A physical simulation technique was designed to test the effect of wave energy on the spilled oil grease ice emulsion. The newly developed test system has the ability to perform simulation tests in wave, wave-ice, wave-oil and wave-ice-oil. This paper presented the design concept of the developed test system and introduced the experimental certifications of its capability in terms of temperature control, wave-making and grease ice-making. The key feature of the technique is a mini wave flume which derives its wave making power from an oscillator in a chemical laboratory. Video cameras record the wave action in the flume in order to obtain wave parameters. The wave making capability tests in this study were used to determine the relation of wave height, length and frequency with oscillator power transfer, oscillator frequency and the depth of the water flume. 16 refs., 10 figs

  6. Removal of Oil and Grease as Emerging Pollutants of Concern (EPC in Wastewater Stream

    Directory of Open Access Journals (Sweden)

    Alade Abass O

    2011-12-01

    Full Text Available Wastewater characteristics, which depend on wastewater source, are increasingly becoming more toxic in recent times. The concentrations of oil and grease in wastewater streams have been observed to increase in wastewater stream with increasing adverse effects on the ecology. This results from the increasing use of oil and grease in high-demanded oil-processed foods, establishment and expansion of oil mills and refineries worldwide, as well as indiscriminate discharge of oil and grease into the water drains, domestically and industrially. This study reports the applications, efficiencies and challenges of the wastewater treatment techniques currently employed in the removal of oil and grease from the industrial wastewater and municipal water stream. The results shows that the concentrations of oil and grease injected into the ecosystem are of higher environmental impact and this needs to be given the desired attention. The desired development for effective removal of oil and grease as emerging pollutants of concern (EPC in wastewater stream are thus proposed. ABSTRAK: Ciri-ciri air sisa, bergantung kepada punca air sisa tersebut, menjadi semakin toksik akhir-akhir ini. Kepekatan minyak dan gris dalam air sisa anak sungai dilihat makin bertambah dalam air sisa anak sungai dengan bertambahnya kesan negatif ke atas ekologi. Ini disebabkan oleh peningkatan penggunaan minyak dan gris dalam makanan berproses yang tinggi permintaannya, penubuhan dan perkembangan kilang pertroleum dan loji penapisan di seluruh dunia. Minyak dan gris juga dibuang sewenang-wenangnya ke dalam parit air, dari kalangan domestik dan industry. Kajian ini membentangkan tentang aplikasi, keberkesanan dan teknik cabaran rawatan air buangan yang kini digunakan dalam pembuangan minyak dan gris dari air sisa industry dan air sungai perbandaran. Keputusan menunjukkan kepekatan minyak dan gris yang wujud dibuang ke dalam ekosistem mempunyai impak yang lebih tinggi terhadap persekitaran

  7. Analysis of genetic distance between Peruvian Alpaca (Vicugna Pacos showing two distinct fleece phenotypes, Suri and Huacaya, by means of microsatellite markers

    Directory of Open Access Journals (Sweden)

    Carlo Renieri

    2011-10-01

    Full Text Available Two coat phenotypes exist in Alpaca, Huacaya and Suri. The two coats show different fleece structure, textile characteristics and prices on the market. Although present scientific knowledge suggests a simple genetic model of inheritance, there is a tendency to manage and consider the two phenotypes as two different breeds. A 13 microsatellite panel was used in this study to assess genetic distance between Suri and Huacaya alpacas in a sample of non-related animals from two phenotypically pure flocks at the Illpa-Puno experimental station in Quimsachata, Peru. The animals are part of a germplasm established approximately 20 years ago and have been bred separately according to their coat type since then. Genetic variability parameters were also calculated. The data were statistically analyzed using the software Genalex 6.3, Phylip 3.69 and Fstat 2.9.3.2. The sample was tested for Hardy-Weinberg equilibrium (HWE and after strict Bonferroni correction only one locus (LCA37 showed deviation from equilibrium (Ploci associations showed significant disequilibrium. Observed heterozygosis (Ho= 0.766; SE=0.044, expected heterozygosis (He=0.769; SE=0.033, number of alleles (Na=9.667, SE=0.772 and Fixation index (F=0.004; SE=0.036 are comparable to data from previous studies. Measures of genetic distance were 0.06 for Nei’s and 0.03 for Cavalli-Sforza’s. The analysis of molecular variance reported no existing variance between populations. Considering the origin of the animals, their post domestication evolution and the reproductive practices in place, the results do not show genetic differentiation between the two populations for the studied loci.

  8. Experimental Comparison of the Behavior between Base Oil and Grease Starvation Based on Inlet Film Thickness

    Directory of Open Access Journals (Sweden)

    D. Kostal

    2017-03-01

    Full Text Available This paper deals with the experimental study of an elastohydrodynamic contact under conditions of insufficient lubricant supply. Starvation level of this type of the contact may be experimentally determined based on the position of the meniscus, but this way can't determine all levels of starvation. Consequent development in the field of tribology achieved theoretical model that can determine all levels of starvation by dependency on the thickness of the lubricant film entering the contact, but it is difficult for experimental verification. The main goal of this work is an experimental study and description of the behavior of the elastohydrodynamic contact with controlled thickness of the lubricant film at the contact input. Contact was lubricated by the base oil and the grease and compared. Results were surprising because the only differences between oil and grease were observed for more viscous lubricants at thicker film layer entering to the contact.

  9. Frictional properties of lubrication greases with the addition of nickel nanoparticles in pneumatic cylinder

    Science.gov (United States)

    Chang, Ho; Lan, Chou-Wei; Guo, Jia-Bin

    2011-12-01

    This paper studies the influence of addition of 100 nm diameter nickel nano-particles on the friction properties of synthetic grease (Li base, VG100) in pneumatic cylinder. The friction force test of pneumatic cylinder equipment measures the frictional force between seal and cylinder bore in pneumatic cylinders. The lubricants with addition of nickel nano-particles were used for lubricating the contact interface between seal and cylinder bore. The friction force test equipment employ a load cell force sensor to measure the friction force between seals and cylinder bores. Results obtained from experimental tests are compared to determine the friction force between seals and cylinder bore in pneumatic cylinders. The study leads to the conclusion that the addition of nickel nano-particles to synthetic grease results in a decrease in friction force between seals and cylinder bores in pneumatic cylinder. This tribological behavior is closely related to the deposition of nano-particles on the rubbing surfaces

  10. International evolution of fat, oil and grease (FOG) waste management - A review

    OpenAIRE

    Wallace, Thomas; Gibbons, David; O'Dwyer, Michael; Curran, Thomas P.

    2017-01-01

    In recent years, issues relating to fat, oil and grease (FOG) in sewer systems have intensified. In the media, sewer blockages caused by FOG waste deposits, commonly referred to as 'fatbergs', are becoming a reminder of the problems that FOG waste can cause when left untreated. These FOG blockages lead to sanitary sewer overflows, property flooding and contamination of water bodies with sewage. Despite these financial and environmentally detrimental effects, a homogenous FOG waste management ...

  11. Sand or grease? Corruption-institutional trust nexus in post-Soviet countries

    OpenAIRE

    Nazim Habibov; Elvin Afandi; Alex Cheung

    2017-01-01

    This paper empirically tests several hypotheses about the nexus of corruption-institutional trust in Post-Soviet transitional countries of the former Soviet Union and Mongolia. We use two different indices of institutional trust to check the robustness of our analysis and estimate OLS and instrumental variable models with and without interaction terms. All things considered, our findings reject “greases the wheels” and “trust begets an honest political system” hypotheses. Instead, our finding...

  12. Greasing the Wheels of Trade: measuring the Dutch transaction with occupational data

    OpenAIRE

    Dalen, Hendrik; Vuuren, Aico

    2003-01-01

    textabstractHow much does a nation spend on resources to 'grease the wheels of trade'? To examine this question the Dutch economy is used as an exemplary case as the Netherlands are known as a nation of traders. This image was derived in the seventeenth century from successes in long distance trade, shipping and financial innovations. Despite its historical background in trading the potential to 'truck and barter' has never been adequately measured. In this paper we present a first attempt in...

  13. Experimental preliminary exploration on determining grease thickness simulated by paraffin in petroleum pipelines

    International Nuclear Information System (INIS)

    Zhao Nongxiao; Arkin, Abulim; Yang Kunjie; Wang Shiheng; Shi Feiyue

    2009-01-01

    1.25 MeV γ-ray of 60 Co Compton scattering coefficient in the simple of paraffin,are measured by γ-ray energy spectrum analysis in two determining means. At the same experimental condition, we have used this scattering coefficient to determining grease thickness simulated by paraffin. The result show the average relative difference is about 1.29% for the best group. (authors)

  14. Fat, oil and grease reduction in commercial kitchen ductwork: A novel biological approach.

    Science.gov (United States)

    Mudie, S; Vahdati, M

    2017-03-01

    Recent research has characterised emissions upon cooking a variety of foods in a commercial catering environment in terms of volume, particle size and composition. However, there has been limited focus on the deposition of solid grease in commercial kitchen ductwork, the sustainability of these systems and their implications on the heat recovery potential of kitchen ventilation extract air. This paper reviews the literature concerning grease, commonly referred to as Fat, Oils and Grease (FOG) abatement strategies and finds that many of these systems fall short of claimed performances. Furthermore these technologies often add to the energy cost of the operation and reduce the potential application of heat recovery in the ventilation ductwork. The aim of this study was to develop and evaluate a novel FOG removal system, with a focus on low environmental impact. The novel FOG removal system, utilises the biological activity of Bacillus subtilis and associated enzymes. The biological reagent is delivered via a misting system. The temperature, relative humidity and FOG deposit thickness were measured in the ductwork throughout a 3month trial period. FOG deposit thickness was reduced by 47% within 7weeks. The system was found to be effective at reducing the FOG deposit thickness with minimal energy cost and impact upon the kitchen and external environment. Internal ductwork operating temperature was measured with respect to future heat recovery potential and a reduction of 7°C was observed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Treatability and kinetics studies of mesophilic aerobic biodegradation of high oil and grease pet food wastewater

    International Nuclear Information System (INIS)

    Liu, Victor Lei; Nakhla, G.; Bassi, A.

    2004-01-01

    In this work, batch activated sludge studies were investigated for the treatment of raw pet food wastewater characterized by oil and grease concentrations of 50,000-66,000 mg/L, COD and BOD concentrations of 100,000 and 80,000 mg/L, respectively, as well as effluent from an existing anaerobic digester treating the aforementioned wastewater. A pre-treatment process, dissolved air flotation (DAF) achieved 97-99% reduction in O and G to about 400-800 mg/L, which is still atypically high for AS. The batch studies were conducted using a 4-L bioreactor at room temperature (21 deg. C) under different conditions. The experimental results showed for the DAF pretreated effluent, 92% COD removal efficiency can be achieved by using conventional activated sludge system at a 5 days contact time and applied initial soluble COD to biomass ratio of 1.17 mg COD/mg VSS. Similarly for the digester effluent at average oil and grease concentrations of 13,500 mg/L, activated sludge affected 63.7-76.2% soluble COD removal at 5 days. The results also showed that all kinetic data best conformed to the zero order biodegradation model with a low biomass specific maximum substrate utilization rate of 0.168 mg COD/mg VSS day reflecting the slow biodegradability of the wastewater even after 99% removal of oil and grease

  16. Amino acid composition of lamb meat from the North East Bulgarian fine fleece breed and its crossbreds with Australian merino and Ile de France from internal breeding

    Directory of Open Access Journals (Sweden)

    R. Slavov

    2016-09-01

    Full Text Available Abstract. A comparative analysis of amino acid composition of lamb meat from the North East Bulgarian fine fleece breed (I gr. and its crossbreds from internal breeding with 25% heredity from the Australian merino (II gr. and Ile de France (III gr. breeds was conducted. Upon starting the experiment lambs were equal and during the experiment they were placed under similar conditions of feeding and rearing. To establish the amino acid composition of meat slaughter analyses were performed at 100 and 130 days of age. From the carcass of each slaughtered animal individual mean samples were taken. Studies were carried out in the Research Laboratory of the Faculty of Agriculture at Trakia University. As a result of the studies the following conclusions were made: ¼ Ile de France crossbreds in a sophisticated crossing have the highest total amino acid content, including essential amino acids in the meat of 100- and 130-day-old lambs, 6.87% and 7.36%, respectively. The lysine/arginine ratio, relating to protein atherogenicity, varies within narrow ranges among groups and marks slight increase with age – from 1.31-1.37 at 100 days to 1.41-1.46 at 130 days. With the increase of age in crossbreds from internal breeding total protein amino acid content grows, that being most prominent in lambs from the III group – from 41.92 to 43.49%. The values of total protein indices increase compared to the reference protein (from 117.97% to 118.22% for II group and from 116.44% to 120.80% for III group and the whole egg protein (from 89.39% to 91.92% for II group and from 90.53% to 93.93 for III group. It has been found that internal breeding of crossbreds with 25% heredity from the Ile de France breed has positive effect concerning the total amino acid content of lamb meat at 100 and 130 days of age, essential amino acid content in it and the levels of total amino acid indices. Internal breeding of crossbreds with 25% heredity from the Australian merino breed

  17. Effects of the free fatty acid content in yellow grease on performance, carcass characteristics, and serum lipids in broilers.

    Science.gov (United States)

    Wu, H; Gong, L M; Guo, L; Zhang, L Y; Li, J T

    2011-09-01

    This study was conducted to investigate whether the free fatty acid (FFA) content of yellow grease would influence the performance and carcass characteristics of broiler chicks. A total of 432 one-day-old, male Arbor Acres broilers were randomly allotted to 1 of 4 treatments, with each treatment being applied to 6 pens of 18 chicks. The dietary treatments were based on corn and soybean meal and were supplemented with either soybean oil (2.86% FFA) or yellow grease with a low (2.74%), medium (12.59%), or high (19.05%) FFA content. The fat sources were supplemented at 1.5% of the diet during the starter phase (0 to 21 d) and at 3.0% of the diet during the grower phase (22 to 42 d). From d 0 to 42, the BW gains of chicks fed diets containing soybean oil and yellow grease with 2.74% FFA were similar. As the FFA level in the yellow grease increased, the BW gain of chicks decreased (P dressing percentage and the percentage of breast muscle in the carcass were significantly (P < 0.01) lower for broilers fed any yellow grease diet compared with birds fed soybean oil. In contrast, abdominal fat was significantly increased in diets containing yellow grease. These results demonstrate that the performance of birds fed yellow grease with a low content of FFA was essentially equal to that of birds fed soybean oil. However, because yellow grease samples containing FFA levels greater than 2.74% negatively affected bird performance, producers should exercise caution with regard to feeding broilers yellow grease with an elevated FFA content. In 42-d-old broilers, serum total cholesterol and low-density lipoprotein cholesterol levels were elevated in birds fed yellow grease, regardless of the dietary level. In contrast, serum high-density lipoprotein cholesterol and triglyceride levels were unaffected by dietary treatment. Although dietary FFA may influence triglyceride-rich lipoprotein metabolism in broilers, an explanation for the observed effects remains elusive.

  18. Enzyme pretreatment of fats, oil and grease from restaurant waste to prolong septic soil treatment system effectiveness.

    Science.gov (United States)

    Dong, Younsuk; Safferman, Steven I; Ostahowski, Jeff; Herold, Tom; Panter, Ronald

    2017-01-02

    When a fast-food restaurant's wastewater containing fats, oil and grease (FOG) is discharged into a collection system, it builds up over time and clogs pipes. Similarly, when such wastewater flows into a septic soil treatment system, it adheres to the surface of inlet pipes, gravel/distribution media and soil, restricting the flow and eventually clogging the septic soil treatment system. In this study, an enzymatic pretreatment system was tested on wastewater from a fast-food restaurant to determine its effectiveness in preventing septic soil treatment system clogging. This system used aeration equipment, baffles and a one-time inoculum that excretes enzymes to reduce the molecular weight and number of double bonds associated with FOG. FOG containing triglycerides having lower molecular weights and fewer double bonds are less sticky. The enzymatic pretreatment system was found to cause these changes as verified by measuring the types of triglycerides (compounds in FOG) using liquid chromatography/mass spectrometry. A unique bench-scale septic soil treatment system (soil trench) was also used. Each contained six soil moisture sensors to enable the determination of moisture saturation trends among the five tested conditions: sanitary wastewater only, a combination of sanitary and kitchen wastewater, enzymatically pretreated sanitary and kitchen wastewater, kitchen wastewater, and enzymatically pretreated kitchen wastewater. For all influent types, a significant amount of FOG and other pollutants were removed, regardless of the initial concentrations. Moisture sensor readings showed differences among the tested conditions, indicating that septic soil treatment system clogging was delayed. Inspection of the influent pipe and gravel at the end of testing verified these differences as did the measurements of volatile solids.

  19. Characterisation of FOGs in grease trap waste from the processing of chickens in Thailand.

    Science.gov (United States)

    Nitayapat, Nuttakan; Chitprasert, Pakamon

    2014-06-01

    Industrial firms that kill and process chickens generate wastewater that contains fat, oil, and grease (FOG). The FOGs are located in the fatty waste that is collected by floatation in grease traps. Chemical and physical characterisation of FOGs would provide useful information that would help in the development of methods designed to decrease the extent of pollution caused by disposal of the waste and to utilise commercially some of its lipid constituents. Employing these methods would enhance the profitability and competitive potential of these commercial organisations. Samples of grease trap waste from 14 firms in central Thailand have been examined. Due to the very different schemes of waste management employed by these firms, the physical appearance of their fatty wastes showed considerable variation. The chemical and physical properties of the FOGs present in these wastes showed considerable variation also. Large amounts of free fatty acids (10-70% as oleic acid) were detected in most of the 14 wastes and palmitic, cis-9-oleic, cis,cis-9,12-linoleic, stearic, and palmitoleic acids were the predominant species of free and esterified acids. Most of the FOGs were solid at temperatures below 40 °C. Many of them contained traces of heavy metals (Cu and Pb) and some contained traces of the pesticides dimethoate and cypermethrin. The content of these potentially hazardous substances would have to be considered very carefully before discarding the fatty wastes and during the development of methods designed to isolate their potentially profitable lipid constituents. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Solar Alpha Rotary Joint (SARJ) Lubrication Interval Test and Evaluation (LITE). Post-Test Grease Analysis

    Science.gov (United States)

    Golden, Johnny L.; Martinez, James E.; Devivar, Rodrigo V.

    2015-01-01

    The Solar Alpha Rotary Joint (SARJ) is a mechanism of the International Space Station (ISS) that orients the solar power generating arrays toward the sun as the ISS orbits our planet. The orientation with the sun must be maintained to fully charge the ISS batteries and maintain all the other ISS electrical systems operating properly. In 2007, just a few months after full deployment, the starboard SARJ developed anomalies that warranted a full investigation including ISS Extravehicular Activity (EVA). The EVA uncovered unexpected debris that was due to degradation of a nitride layer on the SARJ bearing race. ISS personnel identified the failure root-cause and applied an aerospace grease to lubricate the area associated with the anomaly. The corrective action allowed the starboard SARJ to continue operating within the specified engineering parameters. The SARJ LITE (Lubrication Interval Test and Evaluation) program was initiated by NASA, Lockheed Martin, and Boeing to simulate the operation of the ISS SARJ for an extended time. The hardware was designed to test and evaluate the exact material components used aboard the ISS SARJ, but in a controlled area where engineers could continuously monitor the performance. After running the SARJ LITE test for an equivalent of 36+ years of continuous use, the test was opened to evaluate the metallography and lubrication. We have sampled the SARJ LITE rollers and plate to fully assess the grease used for lubrication. Chemical and thermal analysis of these samples has generated information that has allowed us to assess the location, migration, and current condition of the grease. The collective information will be key toward understanding and circumventing any performance deviations involving the ISS SARJ in the years to come.

  1. Review of inservice inspections of greased tendons in prestressed-concrete containments

    International Nuclear Information System (INIS)

    Dougan, J.R.; Ashar, H.

    1983-01-01

    Prestressed-concrete containments in the United States using greased prestressing tendons are inspected periodically to ensure structural integrity and to identify and correct problem areas before they become critical. An analysis of the available utility inspection data and an evaluation of the current and proposed guidelines were conducted to provide a measure of the reliability of the inspection process. Comments from utility and industry personnel were factored into the analysis. The results indicated that the majority of the few incidences of problems or abnormalities which occurred were minor in nature and did not threaten the structural integrity of the containment

  2. Effects of glycerin concentration in steam-flaked corn-based diets with supplemental yellow grease on performance and carcass characteristics of finishing beef steers.

    Science.gov (United States)

    Buttrey, E K; Luebbe, M K; McCollum, F T; Cole, N A; MacDonald, J C; Hales, K E

    2015-07-01

    Forty-eight individually fed crossbred steers (initial BW = 381 ± 7.61 kg) were used to determine the effects of glycerin (GLY) concentration in steam-flaked corn (SFC)-based diets with added yellow grease on animal performance and carcass characteristics. Glycerin was included at 0, 2.5, 5, and 10% dietary DM replacing SFC. A completely randomized design was used with steers as the experimental unit, and the model included the fixed effects of diet. Contrast statements were used to determine linear and quadratic effects of GLY inclusion. Final BW and DMI were not affected (P > 0.27) by GLY concentration. Average daily gain and G:F based on live BW did not differ as GLY level increased in the diet from 0 to 10% of DM (P > 0.33). Carcass-adjusted final BW and carcass-adjusted G:F were also not affected by GLY concentration (P > 0.22); however, carcass-adjusted ADG tended to respond quadratically by decreasing from 2.5 to 5% GLY inclusion and increasing thereafter (P = 0.10). Calculated dietary NEm and NEg did not differ as GLY increased in the diet (P > 0.37). Hot carcass weight tended to respond quadratically, decreasing from 2.5 to 5% GLY and increasing thereafter (P = 0.10). Likewise, dressing percentage tended to respond quadratically by decreasing from 2.5 to 5% GLY inclusion and increasing to 10% GLY inclusion (P = 0.09). Fat thickness decreased linearly as GLY inclusion increased in the diet (P 0.21). Calculated yield grade (YG) decreased linearly as GLY increased in the diet from 0 to 10% of DM (P = 0.04). Based on our results, there was no animal performance benefit for replacing SFC with GLY in diets containing yellow grease, and the only change in carcass merit was a slight improvement in YG.

  3. Efficient production of biodiesel from waste grease: one-pot esterification and transesterification with tandem lipases.

    Science.gov (United States)

    Yan, Jinyong; Li, Aitao; Xu, Yi; Ngo, Thao P N; Phua, Szechao; Li, Zhi

    2012-11-01

    A novel concept and efficient method for producing biodiesel (FAME) from grease (15-40wt% free fatty acid, FFA) were developed by using tandem lipases for one-pot esterification of FFA and transesterification of triglyceride with methanol in a solvent-free system. Combining immobilized Candida antarctica lipase B (CALB) (Novozyme 435) favoring the esterification and immobilized Thermomyces lanuginosus lipase (TLL) (Lipozyme TLIM) preferring the transesterification at 2:8 (wt/wt) gave FAME in 80% yield, being better than that with Novozyme 435 or Lipozyme TLIM. Recombinant Escherichia coli (Calb/Tll) co-expressing CALB and TLL was engineered as a more efficient tandem-lipases system. Using wet or dry cells (4wt%) gave FAME in 87% or 95% yield, which is much better than that with E. coli cells expressing either CALB or TLL alone. Cells of E. coli (Calb/Tll) were recycled for five times and retained 75% productivity, thus being practical for producing biodiesel from grease. Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Development and evaluation of emulsifying systems of the material grease from Brazilian flora

    Directory of Open Access Journals (Sweden)

    Douglas Dourado

    2015-10-01

    Full Text Available Context: Oils and butter of seed from Brazilian biodiversity are extending the range of innovative products for cosmetics development. They have a fat potential similar to skin composition, leading to the improved performance of these product. Aims: Improve the emulsions spreadability through prior screening of grease composition and studying the viscosity, and the emulsions accelerated stability. Methods: Emulsions were formulated using oils from semiarid plants from Bahia: Syagrus coronate, Pachira retusa, and Pachira aquatica, so as to compare them with oils already standard in the production of cosmetics. Spreadability and stability tests were made comparing the results. The same criteria were used with Amazon seed butter: Virola surinamensis, Butyrospermum parkii, Astrocaryum murumuru, Theobroma cacao and Theobroma grandiflorum. For the emulsions screening and performance, a system was developed for oil/ butter, following tests of accelerated stability, viscosity, and spreadability. Results: The combined system of spreadability was optimized using screening. Emollients containing oleic and palmitic acids, and light chain fatty acids obtained good spreadability. The oil emulsion containing Pachira retusa and Virola surinamensis butter had a higher viscosity. Conclusions: With high content of fatty acids such as oleic, palmitic or the light chain fatty acids obtain an appropriated appearance, texture, and spreadability for cosmetic use. Thus, oils with a low fatty acid content may be combined with butter that have a high fatty acid content and vice-versa. Analyzing and strategically combining grease composition, one can optimize the performance of cosmetic formulations.

  5. Wear of Spur Gears Having a Dithering Motion and Lubricated with a Perfluorinated Polyether Grease

    Science.gov (United States)

    Krantz, Timothy; Oswald, Fred; Handschuh, Robert

    2007-01-01

    Gear contact surface wear is one of the important failure modes for gear systems. Dedicated experiments are required to enable precise evaluations of gear wear for a particular application. The application of interest for this study required evaluation of wear of gears lubricated with a grade 2 perfluorinated polyether grease and having a dithering (rotation reversal) motion. Experiments were conducted using spur gears made from AISI 9310 steel. Wear was measured using a profilometer at test intervals encompassing 10,000 to 80,000 cycles of dithering motion. The test load level was 1.1 GPa maximum Hertz contact stress at the pitch-line. The trend of total wear as a function of test cycles was linear, and the wear depth rate was approximately 1.2 nm maximum wear depth per gear dithering cycle. The observed wear rate was about 600 times greater than the wear rate for the same gears operated at high speed and lubricated with oil.

  6. Problems, control, and treatment of fat, oil, and grease (FOG): a review.

    Science.gov (United States)

    Husain, Iman A F; Alkhatib, Ma'an Fahmi; Jammi, Mohamed Saedi; Mirghani, Mohamed E S; Bin Zainudin, Zaki; Hoda, Asif

    2014-01-01

    Presence of fat, oil, and grease (FOG) in wastewater is an ever-growing concern to municipalities and solid-waste facility operators. FOG enters the sewer system from restaurants, residences, and industrial food facilities. Its release into the sewer system results in a continuous build-up that causes eventual blockage of sewer pipes. Several researchers have investigated FOG deposition based on the local conditions of sewers and lifestyle. This paper attempts to review the physical and chemical characteristics of FOG, sources of FOG, and potential chemical and biological reactions of FOG. The effect of the aforementioned factors on the FOG-deposition mechanism is also discussed. Moreover, insight into the current control and treatment methods and potential reuse of FOG is highlighted. It is expected that this review would provide scientists and the concerned authorities a holistic view of the recent researches on FOG control, treatment, and reuse.

  7. Removal of colour, turbidity, oil and grease for slaughterhouse wastewater using electrocoagulation method

    Science.gov (United States)

    Yusoff, Mohd Suffian; Azwan, Azlyza Mohd; Zamri, Mohd Faiz Muaz Ahmad; Aziz, Hamidi Abdul

    2017-10-01

    In this study electrocoagulation method is used to treat slaughterhouse wastewaters. The aim of this study is to determine the efficiency of electrocoagulation method for the removal of colour, turbidity, oil and grease of slaughterhouse wastewaters. The factors of electrode types, and voltage applied during treatment are the study parameters. The types of electrode used are Aluminium (Al) grade 6082 and Iron (Fe) grade 1050. Meanwhile, the ranges of voltage applied are 2, 4, 6, 8 volts at a time interval of 10, 20 and 30 minutes respectively. The effect of these factors on the removal of fat oil and grease (FOG), colour and turbidity are analyzed. The results show maximum removal of FOG, colour and turbidity are recorded using Fe electrode at 8 V of applied voltage with 30 minutes of treatment time. The increase in treatment time of the cell will also increase the amount of hydrogen bubbles at the cathode which results in a greater upwards flux and a faster removal of FOG,, turbidity and colour. The removal of FOG, colour and turbidity are 98%, 92% and 91 % respectively. Meanwhile, by using Al electrodes in the same condition, the removal of FOG, colour and turbidity are 91%, 85% and 87 % respectively. Whereas by using Fe-Al as electrodes pairs, the removal of FOG, colour and turbidity are found to be at 90%, 87% and 76 % respectively. In this case, the Fe-Fe pair electrodes have been proven to provide better performance for FOG, colour and turbidity removals of slaughterhouse wastewaters. Therefore, it is feasible to be considered as an alternative method for wastewater treatment.

  8. Simultaneous removal of oil and grease, and heavy metals from artificial bilge water using electro-coagulation/flotation.

    Science.gov (United States)

    Rincón, Guillermo J; La Motta, Enrique J

    2014-11-01

    US and international regulations pertaining to the control of bilge water discharges from ships have concentrated their attention to the levels of oil and grease rather than to the heavy metal concentrations. The consensus is that any discharge of bilge water (and oily water emulsion within 12 nautical miles from the nearest land cannot exceed 15 parts per million (ppm). Since there is no specific regulation for metal pollutants under the bilge water section, reference standards regulating heavy metal concentrations are taken from the ambient water quality criteria to protect aquatic life. The research herein presented discusses electro-coagulation (EC) as a method to treat bilge water, with a focus on oily emulsions and heavy metals (copper, nickel and zinc) removal efficiency. Experiments were run using a continuous flow reactor, manufactured by Ecolotron, Inc., and a synthetic emulsion as artificial bilge water. The synthetic emulsion contained 5000 mg/L of oil and grease, 5 mg/L of copper, 1.5 mg/L of nickel, and 2.5 mg/l of zinc. The experimental results demonstrate that EC is very efficient in removing oil and grease. For oil and grease removal, the best treatment and cost efficiency was obtained when using a combination of carbon steel and aluminum electrodes, at a detention time less than one minute, a flow rate of 1 L/min and 0.6 A/cm(2) of current density. The final effluent oil and grease concentration, before filtration, was always less than 10 mg/L. For heavy metal removal, the combination of aluminum and carbon steel electrodes, flow rate of 1 L/min, effluent recycling, and 7.5 amps produced 99% zinc removal efficiency. Copper and nickel are harder to remove, and a removal efficiency of 70% was achieved. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Effect of bacterial lipase on anaerobic co-digestion of slaughterhouse wastewater and grease in batch condition and continuous fixed-bed reactor

    OpenAIRE

    Affes, Maha; Aloui, Fathi; Hadrich, Fatma; Loukil, Slim; Sayadi, Sami

    2017-01-01

    Background This study aimed to investigate the effects of bacterial lipase on biogas production of anaerobic co-digestion of slaughterhouse wastewater (SHWW) and hydrolyzed grease (HG). A neutrophilic Staphylococcus xylosus strain exhibiting lipolytic activity was used to perform microbial hydrolysis pretreatment of poultry slaughterhouse lipid rich waste. Results Optimum proportion of hydrolyzed grease was evaluated by determining biochemical methane potential. A high biogas production was o...

  10. Food Grade Grease Berbahan Baku Minyak Sawit Crude Palm Oil (Cpo Off Grade Dengan Variasi Konsentrasi Thickening

    Directory of Open Access Journals (Sweden)

    Martanto Totok

    2017-03-01

    Full Text Available Food grade grease (FGG is a kind of lubricant made from vegetable oil. Food Grease isconsidered safe for healthy and it does not pollute the environment so that it can be veryimportant for particular industries such as pharmaceutical, animal feeding, cosmetic, andespecially food industry. This study is aiming at obtaining optimum basic formulation ofthickening agent (LiOH that can produce qualified food grade grease. It is a kind of factorialexperimental study by using complete random sampling. Based on Fisher test, the treatmentshows a different result significantly. Then, it is continued by conducting Duncan’s MultipleRange Test (DMRT. 2% of activated charcoal is the best treatment because it results FFAscore, lower water content, and the bright yellow color that is shown by the score of 5.48%,0.0498 %, and 3 % that successively obtained. The treatment on thickening agent (LiOH(P1 and the revious one (L1 are the best treatment which produce qualified food gradegrease, corrosion resistance value 12.0, dropping point 130C, lubricating texture value 1,pH value 9.45, water content 0.19%, and ash content value 0.76%.

  11. Effects of choice white grease or poultry fat on growth performance, carcass leanness, and meat quality characteristics of growing-finishing pigs.

    Science.gov (United States)

    Engel, J J; Smith, J W; Unruh, J A; Goodband, R D; O'Quinn, P R; Tokach, M D; Nelssen, J L

    2001-06-01

    Eighty-four crossbred gilts were used to evaluate the effects of dietary choice white grease (CWG) or poultry fat (PF) on growth performance, carcass characteristics, and quality characteristics of longissimus muscle (LM), belly, and bacon of growing-finishing pigs. Pigs (initially 60 kg) were fed a control diet with no added fat or diets containing 2, 4, or 6% CWG or PF. Diets were fed from 60 to 110 kg and contained 2.26 g lysine/Mcal ME. Data were analyzed as a 2 x 3 factorial plus a control with main effects of fat source (CWG and PF) and fat level (2, 4, and 6%). Pigs fed the control diet, 2% fat, and 4% fat had greater (P 0.05) were observed for ADG, dressing percentage, leaf fat weight, LM pH, backfat depth, LM area, percentage lean, LM visual evaluation, LM waterholding capacity, Warner-Bratzler shear and sensory evaluation of the LM and bacon, fat color and firmness measurements, or bacon processing characteristics. Adding dietary fat improved G/F and altered the fatty acid profiles of the LM and bacon, but differences in growth rate, carcass characteristics, and quality and sensory characteristics of the LM and bacon were minimal. Dietary additions of up to 6% CWG or PF can be made with little effect on quality of pork LM, belly, or bacon.

  12. Optimization of municipal sludge and grease co-digestion using disintegration technologies.

    Science.gov (United States)

    Bouchy, L; Pérez, A; Camacho, P; Rubio, P; Silvestre, G; Fernández, B; Cano, R; Polanco, M; Díaz, N

    2012-01-01

    Many drivers tend to foster the development of renewable energy production in wastewater treatment plants as many expectations rely upon energy recovery from sewage sludge, for example through biogas use. This paper is focused on the assessment of grease waste (GW) as an adequate substrate for co-digestion with municipal sludge, as it has a methane potential of 479-710 LCH(4)/kg VS, as well as the evaluation of disintegration technologies as a method to optimize the co-digestion process. With this objective three different pre-treatments have been selected for evaluation: thermal hydrolysis, ultrasound and enzymatic treatment. Results have shown that co-digestion processes without pre-treatment had a maximum increment of 128% of the volumetric methane productivity when GW addition was 23% inlet (at 20 days of HRT and with an OLR of 3.0 kg COD/m(3)d), compared with conventional digestion of sewage sludge alone. Concerning the application of the selected disintegration technologies, all pre-treatments showed improvements in terms of methane yield (51.8, 89.5 and 57.6% more for thermal hydrolysis, ultrasound and enzymatic treatment, respectively, compared with non-pretreated wastes), thermal hydrolysis of GW and secondary sludge being the best configuration as it improved the solubilization of the organic matter and the hydrodynamic characteristics of digestates.

  13. Development and implementation of a propeller test capability for GL-10 "Greased Lightning" propeller design

    Science.gov (United States)

    Duvall, Brian Edward

    Interest in small unmanned aerial vehicles has increased dramatically in recent years. Hybrid vehicles which allow forward flight as a fixed wing aircraft and a true vertical landing capability have always had applications. Management of the available energy and noise associated with electric propeller propulsion systems presents many challenges. NASA Langley has developed the Greased Lightning 10 (GL-10) vertical takeoff, unmanned aerial vehicle with ten individual motors and propellers. All are used for propulsion during takeoff and contribute to acoustic noise pollution which is an identified nuisance to the surrounding users. A propeller test capability was developed to gain an understanding of how the noise can be reduced while meeting minimum thrust requirements. The designed propeller test stand allowed for various commercially available propellers to be tested for potential direct replacement of the current GL-10 propellers and also supported testing of a newly designed propeller provided by the Georgia Institute of Technology. Results from the test program provided insight as to which factors affect the noise as well as performance characteristics. The outcome of the research effort showed that the current GL-10 propeller still represents the best choice of all the candidate propellers tested.

  14. Isolation of Bacterial Strain for Biodegradation of Fats, Oil and Grease

    International Nuclear Information System (INIS)

    Alkhatib, M.F.; Mohd Zahangir Alam; Shabana, H.F.M.

    2015-01-01

    Fat, oil and grease (FOG) deposition is one of the major problems that harm the environment and cause dissatisfaction for human. Uncontrolled and un-pre-treated FOG removal from the kitchen could lead to its accumulation in the piping system. Problems include the interference of fat with the aerobic microorganisms that are responsible in treating the wastewater by reducing oxygen transfer rates and for anaerobic microorganisms; their efficiency could also be reduced due to the reduction of the transport of soluble substrates to the bacterial biomass. Biodegradation could be one of the effective means to treat FOG. The main objective of this study is to isolate bacterial strains from the FOG waste and identify the strains that are capable in biodegrading FOG waste. FOG sample was collected from a sewer manhole. Enrichment technique was applied, followed by isolation of bacterial strains to determine which strain is able to degrade the FOG deposition. Some morphology for the bacterial strain was done to determine its characteristics. (author)

  15. Sand or grease? Corruption-institutional trust nexus in post-Soviet countries

    Directory of Open Access Journals (Sweden)

    Nazim Habibov

    2017-07-01

    Full Text Available This paper empirically tests several hypotheses about the nexus of corruption-institutional trust in Post-Soviet transitional countries of the former Soviet Union and Mongolia. We use two different indices of institutional trust to check the robustness of our analysis and estimate OLS and instrumental variable models with and without interaction terms. All things considered, our findings reject “greases the wheels” and “trust begets an honest political system” hypotheses. Instead, our findings support the “sand the wheels” hypothesis. Furthermore, a multiplicative interaction model suggests that the negative marginal effects of experienced corruption are higher in the environments where satisfaction with services is low. In addition, we found that increases in corruption erode trust at all levels of the societal institutions including political parties, government and financial institutions, international investors, non-profit organizations, and trade unions. This finding is important since it highlights the negative consequences of corruption on the development of broader level economic institutions and on civil society.

  16. Analysis of grease contamination influence on the internal radial clearance of ball bearings by thermographic inspection

    Directory of Open Access Journals (Sweden)

    Mišković Žarko Z.

    2016-01-01

    Full Text Available One of the most important factors influencing ball bearings service life is its internal radial clearance. However, this parameter is also very complex because it depends on applied radial load and ball bearings dimensions, surface finish and manufacturing materials. Thermal condition of ball bearings also significantly affects internal radial clearance. Despite many researches performed in order to find out relevant facts about different aspects of ball bearings thermal behaviour, only few of them are dealing with the real working conditions, where high concentration of solid contaminant particles is present. That’s why the main goal of research presented in this paper was to establish statistically significant correlation between ball bearings temperatures, their working time and concentration of contaminant particles in their grease. Because of especially difficult working conditions, the typical conveyor idlers bearings were selected as representative test samples and appropriate solid particles from open pit coal mines were used as artificial contaminants. Applied experimental methodology included thermographic inspection, as well as usage of custom designed test rig for ball bearings service life testing. Finally, by obtained experimental data processing in advanced software, statistically significant mathematical correlation between mentioned bearings characteristics was determined and applied in commonly used internal radial clearance equation. That is the most important contribution of performed research - the new equation and methodology for ball bearings internal clearance determination which could be used for eventual improvement of existing bearings service life equations. [Projekat Ministarstva nauke Republike Srbije, br. TR35029 i br. TR14033

  17. Evaluation of physical and chemical properties and their interactions in fat, oil, and grease (FOG) deposits.

    Science.gov (United States)

    Gross, Martin A; Jensen, Jeanette L; Gracz, Hanna S; Dancer, Jens; Keener, Kevin M

    2017-10-15

    Fat, oil and grease (FOG) blockages in sewer systems are a substantial problem in the United States. It has been estimated that over 50% of sewer overflows are a result of FOG blockages. In this work, a thorough laboratory study was undertaken to examine key variables that contribute to FOG deposit formation under controlled conditions. Physical and chemical properties and their interactions were evaluated and conditions that generated deposits that mimicked field FOG deposits were identified. It was found that 96 of the of 128 reaction conditions tested in the laboratory formed FOG deposits with similar physical and chemical characteristics as field FOG deposits. It was also found that FOG deposits can be created through fatty acid crystallization and not just saponification. Furthermore FOG deposits were found to be more complex than previously documented and contain free fatty acids, fatty acid metal salts, triacylglycerol's, diacylglycerol's and, monoacylglycerol's. Lastly it was found that FOG deposits that only contained saturated fatty acids were on average 2.1 times higher yield strength than deposits that contained unsaturated fatty acids. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Mechanisms of fat, oil and grease (FOG) deposit formation in sewer lines.

    Science.gov (United States)

    He, Xia; de los Reyes, Francis L; Leming, Michael L; Dean, Lisa O; Lappi, Simon E; Ducoste, Joel J

    2013-09-01

    FOG deposits in sewer systems have recently been shown to be metallic salts of fatty acids. However, the fate and transport of FOG deposit reactant constituents and the complex interactions during the FOG deposit formation process are still largely unknown. In this study, batch tests were performed to elucidate the mechanisms of FOG deposit formation that lead to sanitary sewer overflows (SSOs). We report the first formation of FOG deposits on a concrete surface under laboratory conditions that mimic the formation of deposits in sewer systems. Results showed that calcium, the dominant metal in FOG deposits, can be released from concrete surfaces under low pH conditions and contribute to the formation process. Small amounts of additional oil to grease interceptor effluent substantially facilitated the air/water or pipe surface/water interfacial reaction between free fatty acids and calcium to produce surface FOG deposits. Tests of different fatty acids revealed that more viscous FOG deposit solids were formed on concrete surfaces, and concrete corrosion was accelerated, in the presence of unsaturated FFAs versus saturated FFAs. Based on all the data, a comprehensive model was proposed for the mechanisms of FOG deposit formation in sewer systems. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Evidence for fat, oil, and grease (FOG) deposit formation mechanisms in sewer lines.

    Science.gov (United States)

    He, Xia; Iasmin, Mahbuba; Dean, Lisa O; Lappi, Simon E; Ducoste, Joel J; de los Reyes, Francis L

    2011-05-15

    The presence of hardened and insoluble fats, oil, and grease (FOG) deposits in sewer lines is a major cause of line blockages leading to sanitary sewer overflows (SSOs). Despite the central role that FOG deposits play in SSOs, little is known about the mechanisms of FOG deposit formation in sanitary sewers. In this study, FOG deposits were formed under laboratory conditions from the reaction between free fatty acids and calcium chloride. The calcium and fatty acid profile analysis showed that the laboratory-produced FOG deposit displayed similar characteristics to FOG deposits collected from sanitary sewer lines. Results of FTIR analysis showed that the FOG deposits are metallic salts of fatty acid as revealed by comparisons with FOG deposits collected from sewer lines and pure calcium soaps. Based on the data, we propose that the formation of FOG deposits occurs from the aggregation of excess calcium compressing the double layer of free fatty acid micelles and a saponification reaction between aggregated calcium and free fatty acids.

  20. Statistical modelling of Fat, Oil and Grease (FOG) deposits in wastewater pump sumps.

    Science.gov (United States)

    Nieuwenhuis, Eva; Post, Johan; Duinmeijer, Alex; Langeveld, Jeroen; Clemens, François

    2018-05-15

    The accumulation of FOG (Fat, Oil and Grease) deposits in sewer pumping stations results in an increase in maintenance costs, malfunctioning of pumps and, a potential increase of wastewater spills in receiving open water bodies. It is thought that a variety of parameters (e.g. geometry of the pump sump, pump operation, socioeconomic parameters of the catchment) influences the built-up of FOG. Based on a database containing data of 126 pumping stations located in five Dutch municipalities a statistical model was built. It is shown that 3 parameters are most significant in explaining the occurrence of FOG deposits: mean income of the population in a catchment, the amount of energy (kinetic and potential) per m 3 per day and the density of restaurants, bars and hotels in a catchment. Further it is shown that there are significant differences between municipalities that can be traced back to the local 'design paradigm'. For example, in Amsterdam, the design philosophy of discharging in the pump sump under the water surface (and hence maintaining a low level of turbulence in the pump sump) results in an increase of the probability of the formation of FOG. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. Fat, oil and grease deposits in sewers: characterisation of deposits and formation mechanisms.

    Science.gov (United States)

    Williams, J B; Clarkson, C; Mant, C; Drinkwater, A; May, E

    2012-12-01

    Fat, oil and grease deposits (FOG) in sewers are a major problem and can cause sewer overflows, resulting in environmental damage and health risks. Often simplistically portrayed as cooling of fats, recent research has suggested that saponification may be involved in FOG formation. However there are still questions about the mechanisms effecting transformations in sewers and the role and source of metal cations involved in saponification. This study characterises FOG deposits from pumping stations, sewers and sewage works from different water hardness zones across the UK. The sites all had previous problems with FOG and most catchments contained catering and food preparation establishments. The FOG deposits were highly variable with moisture content ranging from 15 to 95% and oil content from 0 to 548 mg/g. Generally the pumping stations had lower moisture content and higher fat content, followed by the sewers then the sewage works. The water in contact with the FOG had high levels of oil (mean of about 800 mg/L) and this may indicate poor kitchen FOG management practices. FOG fatty acid profiles showed a transformation from unsaturated to saturated forms compared to typical cooking oils. This seems to relate to ageing in the sewer network or the mechanism of formation, as samples from pumping stations had higher proportions of C18:1 compared to C16. This may be due to microbial transformations by bacteria such as Clostridium sp. in a similar process to adipocere formation. There was an association between water hardness and increased Ca levels in FOG along with harder deposits and higher melting points. A link between FOG properties and water hardness has not been previously reported for field samples. This may also be due to microbial processes, such as biocalcification. By developing the understanding of these mechanisms it may be possible to more effectively control FOG deposits, especially when combined with promotion of behavioural change. Copyright © 2012

  2. Influences of Restaurant Waste Fats and Oils (RWFO from Grease Trap as Binder on Rheological and Solvent Extraction Behavior in SS316L Metal Injection Molding

    Directory of Open Access Journals (Sweden)

    Mohd Halim Irwan Ibrahim

    2016-02-01

    Full Text Available This article deals with rheological and solvent extraction behavior of stainless steel 316L feedstocks using Restaurant Waste Fats and Oils (RWFO from grease traps as binder components along with Polypropylene (PP copolymer as a backbone binder. Optimal binder formulation and effect of solvent extraction variables on green compacts are being analyzed. Four binder formulations based on volumetric ratio/weight fraction between PP and RWFO being mixed with 60% volumetric powder loading of SS316L powder each as feedstock. The rheological analysis are based on viscosity, shear rate, temperature, activation energy, flow behavior index, and moldability index. The optimal feedstock formulation will be injected to form green compact to undergo the solvent extraction process. Solvent extraction variables are based on solvent temperature which are 40 °C, 50 °C, and 60 °C with different organic solvents of n-hexane and n-heptane. Analysis of the weight loss percentage and diffusion coefficient is done on the green compact during the solvent extraction process. Differential Scanning Calorimeter (DSC is used to confirm the extraction of the RWFO in green compacts. It is found that all binder fractions exhibit pseudoplastic behavior or shear thinning where the viscosity decreases with increasing shear rate. After considering the factors that affect the rheological characteristic of the binder formulation, feedstock with binder formulation of 20/20 volumetric ratio between PP and RWFO rise as the optimal binder. It is found that the n-hexane solvent requires less time for extracting the RWFO at the temperature of 60 °C as proved by its diffusion coefficient.

  3. Effect of bacterial lipase on anaerobic co-digestion of slaughterhouse wastewater and grease in batch condition and continuous fixed-bed reactor.

    Science.gov (United States)

    Affes, Maha; Aloui, Fathi; Hadrich, Fatma; Loukil, Slim; Sayadi, Sami

    2017-10-10

    This study aimed to investigate the effects of bacterial lipase on biogas production of anaerobic co-digestion of slaughterhouse wastewater (SHWW) and hydrolyzed grease (HG). A neutrophilic Staphylococcus xylosus strain exhibiting lipolytic activity was used to perform microbial hydrolysis pretreatment of poultry slaughterhouse lipid rich waste. Optimum proportion of hydrolyzed grease was evaluated by determining biochemical methane potential. A high biogas production was observed in batch containing a mixture of slaughterhouse composed of 75% SHWW and 25% hydrolyzed grease leading to a biogas yield of 0.6 L/g COD introduced. Fixed bed reactor (FBR) results confirmed that the proportion of 25% of hydrolyzed grease gives the optimum condition for the digester performance. Biogas production was significantly high until an organic loading rate (OLR) of 2 g COD/L. d. This study indicates that the use of biological pre-treatment and FBR for the co-digestion of SHWW and hydrolyzed grease is feasible and effective.

  4. Oil and grease (O&G) removal from commercial kitchen waste water using carbonised grass as a key media

    OpenAIRE

    Rahmat Siti Nazahiyah; Mohd Ali Ahmad Zurisman; Wan Ibrahim Mohd Haziman; Alias Nur Azrena

    2017-01-01

    Oil and grease (O&G) are usually found in kitchen waste water. O&G are poorly soluble in water and can cause serious problems during the wastewater treatment. Adsorption is a fundamental process in the treatment of kitchen waste water and very economical. Activated carbon is the most effective adsorbent for this application. Therefore, the aim of the current study is to determine the potential of four materials (i.e. sand, gravel, carbonised grass (CG) and clay powder) as filter media for O&G...

  5. Preliminary experimental research to detect grease stain of petroleum pipeline by sup 1 sup 3 sup 7 Cs gamma-ray transmission method

    CERN Document Server

    Wang Shi Heng

    2002-01-01

    The experimental study on the detection of grease stain for petroleum pipeline in Karamay oil-field of Xinjiang is carried out by gamma-ray transmission method. Experimental provision consists of sup 1 sup 3 sup 7 Cs gamma radiator and NaI(Tl) scintillation detector. The response of grease stain thickness of petroleum pipeline in Karamay oil-field is ln(N sub 0 /N)=0.00548 d-0.0046, and the response of paraffin thickness is ln(N sub 0 /N)=0.00522d-0.0126. The result of experiment indicates that the response of grease stain thickness is more sensitive than the response of paraffin thickness

  6. Wastewater transformations and fertilizer value when co-digesting differing ratios of swine manure and used cooking grease in low-cost digesters

    Energy Technology Data Exchange (ETDEWEB)

    Lansing, Stephanie [Department of Environmental Science and Technology, University of Maryland, 1445 Animal Sci./Ag. Eng. Bldg., College Park, MD 20742-2315 (United States); Martin, Jay F. [Department of Food, Agricultural, and Biological Engineering, The Ohio State University, 590 Woody Hayes Drive, Columbus, OH 43210-1057 (United States); Botero, Raul Botero; Nogueira da Silva, Tatiana; Dias da Silva, Ederson [EARTH University, Apartado Postal 4442 - 1000, San Jose (Costa Rica)

    2010-12-15

    A nine-month co-digestion investigation was conducted in Costa Rica to optimize animal wastewater treatment, renewable energy production, and fertilizer creation using 12 Taiwanese-model, plug-flow digesters (250 L each) constructed of tubular polyethylene and PVC piping, operating without mechanical or heating components. The experiment tested three replications of four treatment groups: the control (T0), which contained only swine manure, and T2.5, T5, and T10, which contained 2.5%, 5%, and 10% used cooking grease (by volume) combined with swine manure. T2.5 had the greatest methane production (45 L d{sup -1}), a 124% increase from the control. No adverse effects were observed from co-digesting 2.5% grease in terms of organic matter removal, pathogen reduction, grease removal, and pH. Chemical oxygen demand (COD) was reduced 94.7% to 1.96 g L{sup -1}, fecal coliforms and Escherichia coli were reduced 99.2 and 97.1%, respectively, and grease removal was 99.9%. The average effluent pH (7.05) and alkalinity in T2.5 was within the optimal range for methanogens and increased significantly during the nine-month experiment, likely due to adaptation of the methanogenic organisms to the influent grease concentrations. Total nitrogen concentration decreased 34.0%, and NH{sub 4}-N increased 97.1% during digestion in T2.5, with no significant differences between T2.5 and T0. There was less phosphorus reduction with co-digestion, with 181 mg g{sup -1} of total phosphorus (TP) in T2.5 and only 90.6 mg g{sup -1} of TP in T0, resulting in lower N:P ratios in the grease treatment groups due to the greater concentration of phosphorus in the effluent. (author)

  7. Semi-continuous anaerobic co-digestion of thickened waste activated sludge and fat, oil and grease

    International Nuclear Information System (INIS)

    Wan Caixia; Zhou Quancheng; Fu Guiming; Li Yebo

    2011-01-01

    Highlights: → Co-digestion of thickened waste activated sludge (TWAS) with fat, oil and grease (FOG). → Co-digestion of TWAS and FOG at 64% VS increased biogas production by 137%. → FOG addition ratio at 74% of total VS caused inhibition of the anaerobic digestion process. → Micronutrients addition did not significantly improve the biogas production and digestion stabilization. - Abstract: Co-digestion of thickened waste activated sludge (TWAS) and fat, oil and grease (FOG) was conducted semi-continuously under mesophilic conditions. The results showed that daily methane yield at the steady state was 598 L/kg VS added when TWAS and FOG (64% of total VS) were co-digested, which was 137% higher than that obtained from digestion of TWAS alone. The biogas composition was stabilized at a CH 4 and CO 2 content of 66.8% and 29.5%, respectively. Micronutrients added to co-digestion did not improve the biogas production and digestion stabilization. With a higher addition of FOG (74% of total VS), the digester initially failed but was slowly self-recovered; however, the methane yield was only about 50% of a healthy reactor with the same organic loading rate.

  8. Green diesel production via catalytic hydrogenation/decarboxylation of triglycerides and fatty acids of vegetable oil and brown grease

    Science.gov (United States)

    Sari, Elvan

    Increase in the petroleum prices, projected increases in the world's energy demand and environmental awareness have shifted the research interest to the alternative fuel technologies. In particular, green diesel, vegetable oil/animal fat/waste oil and grease derived hydrocarbons in diesel boiling range, has become an attractive alternative to biodiesel---a mixture of fatty acid methyl esters, particularly due to its superior fuel properties that are similar to petroleum diesel. Hence, green diesel can be used as a drop-in fuel in the current diesel engines. The current technology for production of green diesel-hydrodeoxygenation of triglycerides and fatty acids over conventional hydrotreating catalysts suffers from fast catalyst deactivation in the absence of hydrogen combined with high temperatures and high fatty acid content in the feedstock. Additionally, excess hydrogen requirement for hydrodeoxygenation technique leads to high production costs. This thesis proposes a new technology-selective decarboxylation of brown grease, which is a mixture of fats and oils collected from waste water trap and rich in fatty acids, over a supported noble metal catalyst that overcomes the green diesel production challenges. In contrast to other feedstocks used for liquid biofuel production, brown grease is inexpensive and non-food competing feedstock, therefore the process finds solution to waste management issues, reduces the renewable fuel production cost and does not add to the global food shortage problems. Special catalyst formulations were developed to have a high activity and stability in the absence of hydrogen in the fatty acid decarboxylation process. The study shows how catalyst innovations can lead to a new technology that overcomes the process challenges. First, the effect of reaction parameters on the activity and the selectivity of brown grease decarboxylation with minimum hydrogen consumption over an activated carbon supported palladium catalyst were

  9. Contribution to the study of the physical stability of the suspensions of zinc oxide, titanium dioxide and precipitated sulphur employing emulsified solid greases like vehicle

    International Nuclear Information System (INIS)

    Porras Navarro, Martha

    2001-01-01

    This research evaluated the physical stability of the suspensions of zinc oxide, precipitated sulphur and titanium dioxide. By using emulsified vehicles of three solid greases: stearilic alcohol, stearic acid and beeswax. That varies the concentration of solid grease (2%, 4%, 6 %) and the velocity of agitation for the emulsified vehicle's preparation (250, 500, 750 revolutions by minutes). That got 81 suspensions, 27 for every grease employed. The following effects there were evaluated like indicators of the physical stability of the suspensions: volume of sediment, apparent viscosity, facility of resuspension. There was effected an analysis of the varying of two controlled factors to establish the importance since the statistical viewpoint of the variants of the process over the volume of the sediment. This study indicates that the selection of solid grease is an parameter which influence is significant, what supports the got data through the research. By giving as a result that the stearilic alcohol is the most competent vehicle for the preparation of these suspensions. (Author) [es

  10. Thermophilic anaerobic co-digestion of sewage sludge with grease waste: Effect of long chain fatty acids in the methane yield and its dewatering properties

    International Nuclear Information System (INIS)

    Silvestre, G.; Illa, J.; Fernández, B.; Bonmatí, A.

    2014-01-01

    Highlights: • Thermophilic anaerobic codigestion of sewage sludge and grease waste (GW) doubles methane yield. • High GW doses in the influent leads to instability and LCFA accumulation in the effluent. • GW addition promotes acetoclastic activity whilst worsening the hydrogenothrophic activity. • The mesophilic codigestion with GW performs better than the thermophilic one. - Abstract: Thermophilic co-digestion of sewage sludge with three different doses of trapped grease waste (GW) from the pre-treatment of a WWTP has been assessed in a CSTR bench-scale reactor. After adding 12% and 27% of grease waste (on COD basis), the organic loading rate increased from 2.2 to 2.3 and 2.8 kg COD m −3 d −1 respectively, and the methane yield increased 1.2 and 2.2 times. Further GW increase (37% on COD basis) resulted in an unstable methane yield and in long chain fatty acids (LCFA) accumulation. Although this inestability, the presence of volatile fatty acids in the effluent was negligible, showing good adaptation to fats of the thermophilic biomass. Nevertheless, the presence of LCFA in the effluent worsens its dewatering properties. Specific methanogenic activity tests showed that the addition of grease waste ameliorates the acetoclastic activity in detriment of the hydrogenotrophic activity, and suggests that the tolerance to LCFA can be further enhanced by slowly increasing the addition of lipid-rich materials

  11. The indigenisation of Lubriplate 630-2 and development of Servo-Nuclease-2 grease for the fuelling machine of pressurised heavy water power reactors

    International Nuclear Information System (INIS)

    Srivastava, S.B.; Thomas, V.G.

    1980-01-01

    A new grease of NLGI-2 consistency was developed for application in nuclear environments. The evaluation consisted of both static tests employing a cobalt-60 γ-ray source and dynamic tests carried out on specially designed rigs in Fuelling Machine Vaults of RAPS. (auth.)

  12. [Determination of 3-monochloropropane-1,2-diol in grease food by solid phase extraction-derivatization-gas chromatography-mass spectrometry].

    Science.gov (United States)

    Xiang, Xiaoling; Wang, Liyuan; Shen, Xianghong; Li, Chunsong; Shen, Jianfu; Wu, Pinggu

    2017-09-01

    To establish the method of determination of 3-monochloropropane-1,2-diol( 3-MCPD) in grease food by gas chromatography-mass spectrometry( GC-MS). 3-MCPD in grease food represented by bean paste was extracted by ultrasound,purified by alkaline earth solid phase extraction column,derivatived using phenylboronic acid( PBA) and detected by GC-MS. The linearity of 3-MCPD ranged from 1-100 ng/mL,with correlation coefficient at 0. 9993.The limits of quantitation( LOQ) in soy sauce,bean paste,pepper oil were 0. 6,0. 5 and7. 0 μg/kg and limits of detection( LOD) were 1. 9,1. 6 and 18. 8 μg/kg,respectively.Average recovery rate and relative standard deviation was 78. 3%-106. 7% and 1. 9%-11. 6%( n = 6), when 3-MCPD was added in grease food at 2. 5-1000 μg/kg. The method has good purification effect and the detection sensitivity and accuracy,and can be used for the determination of 3-MCPD in grease food.

  13. Weight Management

    Science.gov (United States)

    ... Health Information Weight Management English English Español Weight Management Obesity is a chronic condition that affects more ... Liver (NASH) Heart Disease & Stroke Sleep Apnea Weight Management Topics About Food Portions Bariatric Surgery for Severe ...

  14. Analysis of in-service inspection guides for post-tensioning systems in containment structures with greased tendons

    International Nuclear Information System (INIS)

    Bae, I. H.; Choi, I. G.; Seo, J. M.

    2000-01-01

    Prestressed concrete containments(PCC) are inspected periodically to ensure structural integrity and to identify and correct problems before they come critical. These inspections are conducted in accordance with the Nuclear Regulatory Committee(NRC) Regulatory Guide. As experience with the surveillance mounts, the guide is revised to keep pace with technological advances in containment design and to reflect the knowledge obtained experience. In the study, an analysis of the available utility surveillance data and an evaluation of the NRC Regulatory Guide and the ASME Code are conducted. The results indicate that the average value of the lower bound defined in Regulatory Guide 1.35.1 can be less than the minimum required force level at 40 years for the existing containment and thus an acceptable alternative has to be presented to meet the allowance of the guide. Tendons in excess of the upper bound or 70% of the ultimate tensile strength of the tendon are observed. Such an occurrence indicates tendon behavior outside the tolerance band that expected, and the cause of such behavior has to be investigated. It is shown that the behavior of the predicted prestressing force with time based on assumed losses does quite different from that of the measured tendon force with time and, therefore, studies for the significant factors, such as shrinkage and creep of concrete, that influence the time-dependent losses in PCC are needed. Additional research on the long-term effects of the impurity levels on the effectiveness of the grease seems justified

  15. A Survey on the Removal Efficiency of Fat, Oil and Grease in Shiraz Municipal Wastewater Treatment Plant

    Directory of Open Access Journals (Sweden)

    Dehghani

    2014-12-01

    Full Text Available Background Fat, oil and grease (FOG in municipal wastewater treatment plant (MWWTP caused many problems. Objectives This study aimed to determine the removal efficiency of FOG in Shiraz MWWTP. Materials and Methods The removal efficiencies of FOG in the MWWTP were studied from June 2011 to September 2011 in Shiraz (Iran. The influent and effluent wastewater samples were collected in a volume of one liter (4 samples per week and analyzed according to the standard methods. Samples are transferred to the laboratory immediately. The concentration of FOG was determined using the solvent extraction and separating funnel and then compared with the effluent standards. To analyze the data, SPSS (version 11.5, Chi-square test and t test were used. Results The results showed that the FOG amount in input raw sewage in the MWWTP from June 2011 to September 2011 was around 25.5 mg/L and the amount in treated wastewater was about 8.1 mg/L. The FOG removal efficiency in this refinery was about 70% and met the environmental standards for the discharge (less than 10 mg/L (P < 0.05. Conclusions The effluent can be discharged to surface waters or used for irrigation. In order to the FOG concentration met the effluent standards, it is very crucial to control the entrance of industrial wastewater to the municipal wastewater collection networks. Otherwise, the MWWTP should be upgraded and the special techniques used to reduce FOG.

  16. Understanding the spatial formation and accumulation of fats, oils and grease deposits in the sewer collection system.

    Science.gov (United States)

    Dominic, Christopher Cyril Sandeep; Szakasits, Megan; Dean, Lisa O; Ducoste, Joel J

    2013-01-01

    Sanitary sewer overflows are caused by the accumulation of insoluble calcium salts of fatty acids, which are formed by the reaction between fats, oils and grease (FOG) and calcium found in wastewaters. Different sewer structural configurations (i.e., manholes, pipes, wet wells), which vary spatially, along with other obstructions (roots intrusion) and pipe deformations (pipe sags), may influence the detrimental buildup of FOG deposits. The purpose of this study was to quantify the spatial variation in FOG deposit formation and accumulation in a pilot-scale sewer collection system. The pilot system contained straight pipes, manholes, roots intrusion, and a pipe sag. Calcium and oil were injected into the system and operated at alkaline (pH = 10) and neutral (pH = 7) pH conditions. Results showed that solid accumulations were slightly higher at neutral pH. Fourier transform infrared (FTIR) analysis on the solids samples confirmed that the solids were indeed calcium-based fatty acid salts. However, the fatty acid profiles of the solids deviated from the profile found from FOG deposits in sewer systems, which were primarily saturated fatty acids. These results confirm the work done previously by researchers and suggest an alternative fate of unsaturated fatty acids that does not lead to their incorporation in FOG deposits in full-scale sewer systems.

  17. Evaluating and modeling biogas production from municipal fat, oil, and grease and synthetic kitchen waste in anaerobic co-digestions.

    Science.gov (United States)

    Li, Chenxi; Champagne, Pascale; Anderson, Bruce C

    2011-10-01

    The feasibility of using synthetic kitchen waste (KW) and fat, oil, and grease (FOG) as co-substrates in the anaerobic digestion of waste activated sludge (WAS) was investigated using two series of biochemical methane potential (BMP) tests. Ranges of ideal substrate to inoculum (S/I) ratio were determined for the FOG (0.25-0.75) and KW (0.80-1.26) as single substrates in the first experiment. The second experiment, which estimated the methane production performances of FOG and KW as co-substrates for WAS co-digestion, was conducted based on the optimal parameters selected from the results of the first experiment. Results indicated that co-digestions with FOG and KW enhanced methane production from 117±2.02 mL/gTVS (with only WAS) to 418±13.7 mL/gTVS and 324±4.11 mL/gTVS, respectively. FOG exhibited more biogas production than KW as co-substrate. Non-linear regression results showed that co-substrate addition shortened the lag phases of organic biodegradation from 81.8 (with only WAS) to 28.3 h with FOG and 3.90 h with KW. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Accumulation of oil and grease in soils irrigated with greywater and their potential role in soil water repellency.

    Science.gov (United States)

    Travis, Micheal J; Weisbrod, Noam; Gross, Amit

    2008-05-01

    The potential impact of oil and grease (O and G) to soils irrigated with greywater (GW) was investigated. Greywater streams were sampled and analyzed for O and G content, along with corresponding GW-irrigated soils. Untreated kitchen GW averaged 200 mg L(-1) O and G, over an order of magnitude more than other GW streams. GW-irrigated soils showed O and G accumulation of up to 200 mg kg(-l) within the first 20-cm of depth. To determine the potential effects of such O and G accumulation on water movement in soil, capillary rise and water drop penetration time (WDPT) experiments were conducted. The results showed up to 60% decrease in capillary rise when sand containing 250 mg kg(-1) O and G was used. Interestingly, no additional reduction in capillary rise was observed at concentrations above 250 mg kg(-1). WDPT was observed to increase linearly with increased O and G content, up to 1000 mg kg(-1). This work demonstrated that O and G in GW used for irrigation can accumulate in soil and may lead to a significant reduction in the soils ability to transmit water.

  19. Effects of tallow, choice white grease, palm oil, corn oil, or soybean oil on apparent total tract digestibility of minerals in diets fed to growing pigs.

    Science.gov (United States)

    Merriman, L A; Walk, C L; Parsons, C M; Stein, H H

    2016-10-01

    An experiment was conducted to determine the effect of supplementing diets fed to growing pigs with fat sources differing in their composition of fatty acids on the apparent total tract digestibility (ATTD) of minerals. A diet based on corn, potato protein isolate, and 7% sucrose was formulated. Five additional diets that were similar to the previous diet with the exception that sucrose was replaced by 7% tallow, choice white grease, palm oil, corn oil, or soybean oil were also formulated. Diets were formulated to contain 0.70% Ca and 0.33% standardized total tract digestible P. Growing barrows ( = 60; 15.99 ± 1.48 kg initial BW) were allotted to a randomized complete block design with 2 blocks of 30 pigs, 6 dietary treatments, and 10 replicate pigs per treatment. Experimental diets were provided for 12 d with the initial 5 d being the adaptation period. Total feces were collected for a 5-d collection period using the marker-to-marker approach, and the ATTD of minerals, ether extract, and acid hydrolyzed ether extract was calculated for all diets. Digestibility of DM was greater ( soybean oil compared with the diet containing choice white grease or the basal diet, with all other diets being intermediate. The ATTD of Ca, S, and P was greater ( soybean oil, corn oil, palm oil, or tallow than for pigs fed the basal diet or the diet containing choice white grease. The ATTD of Mg, Zn, Mn, Na, and K were not different among dietary treatments. The ATTD of ether extract was greater ( oil, corn oil, or soybean oil compared with the diet containing choice white grease, and the ATTD of acid hydrolyzed ether extract in the diet containing soybean oil was also greater ( oil, corn oil, or soybean oil may increase the ATTD of some macrominerals, but that appears not to be the case if choice white grease is used. There was no evidence of negative effects of the fat sources used in this experiment on the ATTD of any minerals.

  20. Oil and grease (O&G removal from commercial kitchen waste water using carbonised grass as a key media

    Directory of Open Access Journals (Sweden)

    Rahmat Siti Nazahiyah

    2017-01-01

    Full Text Available Oil and grease (O&G are usually found in kitchen waste water. O&G are poorly soluble in water and can cause serious problems during the wastewater treatment. Adsorption is a fundamental process in the treatment of kitchen waste water and very economical. Activated carbon is the most effective adsorbent for this application. Therefore, the aim of the current study is to determine the potential of four materials (i.e. sand, gravel, carbonised grass (CG and clay powder as filter media for O&G removal. The CGs were originated from “Elephant Grass” and it is a fast growing plant with significant potential as carbon. The clay acts as a magnet, drawing the oil molecules out of the water and causing them to attach to the surfaces of the clay. In the current study, two filters were developed with different media materials to get the best percentage removal. Filters 1 and 2 were filled with sand, gravel and CG, and sand, gravel, CG and powder clay, respectively. Three samples were taken during peak hour between April and May 2016. The initial O&G concentration varied from 101.37 mg/l to 248.30 mg/l and the final concentration varied from none to 22.57 mg/l for both filters. The percentage removal (% of O&G were between 90.9 and 97.3 (Filter 1 and between 94.3 and 100 (Filter 2. Overall, both filters could efficiently remove O&G in the waste water and the quality of the carbonised grass proved to be as good as carbon produced from other traditional sources.

  1. Weighted Clustering

    DEFF Research Database (Denmark)

    Ackerman, Margareta; Ben-David, Shai; Branzei, Simina

    2012-01-01

    We investigate a natural generalization of the classical clustering problem, considering clustering tasks in which different instances may have different weights.We conduct the first extensive theoretical analysis on the influence of weighted data on standard clustering algorithms in both...... the partitional and hierarchical settings, characterizing the conditions under which algorithms react to weights. Extending a recent framework for clustering algorithm selection, we propose intuitive properties that would allow users to choose between clustering algorithms in the weighted setting and classify...

  2. Microbial community adaptation influences long-chain fatty acid conversion during anaerobic codigestion of fats, oils, and grease with municipal sludge.

    Science.gov (United States)

    Ziels, Ryan M; Karlsson, Anna; Beck, David A C; Ejlertsson, Jörgen; Yekta, Sepehr Shakeri; Bjorn, Annika; Stensel, H David; Svensson, Bo H

    2016-10-15

    Codigesting fats, oils, and greases with municipal wastewater sludge can greatly improve biomethane recovery at wastewater treatment facilities. Process loading rates of fats, oils, and greases have been previously tested with little knowledge of the digester microbial community structure, and high transient fat loadings have led to long chain fatty acid (LCFA) accumulation and digester upsets. This study utilized recently-developed quantitative PCR assays for syntrophic LCFA-degrading bacteria along with 16S amplicon sequencing to relate changes in microbial community structure to LCFA accumulation during transient loading increases to an anaerobic codigester receiving waste restaurant oil and municipal wastewater sludge. The 16S rRNA gene concentration of the syntrophic β-oxidizing genus Syntrophomonas increased to ∼15% of the Bacteria community in the codigester, but stayed below 3% in the control digester that was fed only wastewater sludge. Methanosaeta and Methanospirillum were the dominant methanogenic genera enriched in the codigester, and together comprised over 80% of the Archaea community by the end of the experimental period. Constrained ordination showed that changes in the codigester Bacteria and Archaea community structures were related to measures of digester performance. Notably, the effluent LCFA concentration in the codigester was positively correlated to the specific loading rate of waste oil normalized to the Syntrophomonas 16S rRNA concentration. Specific loading rates of 0-1.5 × 10(-12) g VS oil/16S gene copies-day resulted in LCFA concentrations below 30 mg/g TS, whereas LCFA accumulated up to 104 mg/g TS at higher transient loading rates. Based on the community-dependent loading limitations found, enhanced biomethane production from high loadings of fats, oils and greases can be achieved by promoting a higher biomass of slow-growing syntrophic consortia, such as with longer digester solids retention times. This work also

  3. Comparison of acrylic polymer adhesive tapes and silicone optical grease in light sharing detectors for positron emission tomography.

    Science.gov (United States)

    Van Elburg, Devin J; Noble, Scott D; Hagey, Simone; Goertzen, Andrew L

    2018-02-26

    Optical coupling is an important factor in detector design as it improves optical photon transmission by mitigating internal reflections at light-sharing boundaries. In this work we compare optical coupling materials, namely double-sided acrylic polymer tapes and silicone optical grease (SiG), in the context of positron emission tomography. Four double-sided tapes from 3 M of varying thicknesses (0.229 mm-1.016 mm) and adhesive materials ('100MP', 'A100', and 'GPA') were characterized with spectrophotometer measurements as well as photopeak amplitude and energy resolution measurements using lutetium-yttrium oxy-orthosilicate (LYSO) coupled to photomultiplier tubes (PMT) or silicon photomultipliers (SiPMs). Transmission spectra from the spectrophotometer showed over 80% transmission for all tapes at 420 nm and above, with 89.6% and 88.8% transmission for the 0.508 mm and 1.016 mm thick GPA tapes, respectively, at 420 nm. Measurements with single-pixel LYSO-PMT and 4  ×  4 array (one-to-one coupled) LYSO-SiPM setups determined that SiG had the greatest photopeak amplitude, with tapes showing 2.1%-14.8% reduction in photopeak amplitude with respect to SiG. Energy resolution changed by less than 4% on a relative basis between tapes and SiG with PMT measurements, however for the SiPM array measurements the energy resolution improved from 15.6%  ±  2.7% full-width at half-maximum to 11.4%  ±  1.2% for SiG and 1 mm GPA respectively. Data acquired with dual-layer offset LYSO arrays (light sharing detector designs) demonstrated that a detector coupled with 1 mm thick GPA tape produced equivalent detector flood histograms to those from a design coupled with SiG and a 1 mm thick glass lightguide. No significant degradation in photopeak amplitude and energy resolution was observed over five months of measurements, indicating the tapes maintain their coupling integrity over several months. Though minimal photopeak amplitude degradation

  4. Comparison of acrylic polymer adhesive tapes and silicone optical grease in light sharing detectors for positron emission tomography

    Science.gov (United States)

    Van Elburg, Devin J.; Noble, Scott D.; Hagey, Simone; Goertzen, Andrew L.

    2018-03-01

    Optical coupling is an important factor in detector design as it improves optical photon transmission by mitigating internal reflections at light-sharing boundaries. In this work we compare optical coupling materials, namely double-sided acrylic polymer tapes and silicone optical grease (SiG), in the context of positron emission tomography. Four double-sided tapes from 3 M of varying thicknesses (0.229 mm-1.016 mm) and adhesive materials (‘100MP’, ‘A100’, and ‘GPA’) were characterized with spectrophotometer measurements as well as photopeak amplitude and energy resolution measurements using lutetium-yttrium oxy-orthosilicate (LYSO) coupled to photomultiplier tubes (PMT) or silicon photomultipliers (SiPMs). Transmission spectra from the spectrophotometer showed over 80% transmission for all tapes at 420 nm and above, with 89.6% and 88.8% transmission for the 0.508 mm and 1.016 mm thick GPA tapes, respectively, at 420 nm. Measurements with single-pixel LYSO-PMT and 4  ×  4 array (one-to-one coupled) LYSO-SiPM setups determined that SiG had the greatest photopeak amplitude, with tapes showing 2.1%-14.8% reduction in photopeak amplitude with respect to SiG. Energy resolution changed by less than 4% on a relative basis between tapes and SiG with PMT measurements, however for the SiPM array measurements the energy resolution improved from 15.6%  ±  2.7% full-width at half-maximum to 11.4%  ±  1.2% for SiG and 1 mm GPA respectively. Data acquired with dual-layer offset LYSO arrays (light sharing detector designs) demonstrated that a detector coupled with 1 mm thick GPA tape produced equivalent detector flood histograms to those from a design coupled with SiG and a 1 mm thick glass lightguide. No significant degradation in photopeak amplitude and energy resolution was observed over five months of measurements, indicating the tapes maintain their coupling integrity over several months. Though minimal photopeak amplitude

  5. Just Greasing the Wheels?

    DEFF Research Database (Denmark)

    Adler-Nissen, Rebecca

    2015-01-01

    We traditionally see diplomats as mediators.They build bridges between nations and they repair them when they break. During a crisis, diplomats ‘keep it cool’ and try to prevent the crisis from worsening into armed conflict. Diplomats are the men and women who keep the international system runnin...

  6. Wanted: elbow grease

    CERN Document Server

    Anaïs Schaeffer

    2013-01-01

    In Divonne-les-Bains, an association founded by former CERN personnel is restoring the oldest hydroelectric plant in France. The adventure started more than ten years ago, and now you’re invited to take part…   View of the benzole-powered thermic engine from 1907. Georges Leskens, a spritely 85-year-old, is president of the Divonnelectro association. Georges, a former electrical engineer at CERN, now has a new goal: to bring the Moulin David hydroelectric plant in Divonne-les-Bains, which he found in a derelict state in 2001, back to life. “When I entered the plant for the first time, I found several remarkable period machines… and the extent of the damage,” recalls Georges. “Among other things, the town used the building for storing salt and grit for the roads... so I don’t need to tell you what state the mechanisms were in!” Aware of the historical value of the site (see box), Georges convinced the D...

  7. High-purity fatty acid methyl ester production from canola, soybean, palm, and yellow grease lipids by means of a membrane reactor

    International Nuclear Information System (INIS)

    Cao Peigang; Dube, Marc A.; Tremblay, Andre Y.

    2008-01-01

    High-purity fatty acid methyl ester (FAME) was produced from different lipids, such as soybean oil, canola oil, a hydrogenated palm oil/palm oil blend, yellow grease, and brown grease, combined with methanol using a continuous membrane reactor. The membrane reactor combines reaction and separation in a single unit, provides continuous mixing of raw materials, and maintains a high molar ratio of methanol to lipid in the reaction loop while maintaining two phases during the reaction. It was demonstrated that the membrane reactor can be operated using a very broad range of feedstocks at highly similar operating conditions to produce FAME. The total glycerine and free glycerine contents of the FAME produced were below the ASTM D6751 standard after a single reaction step. Under essentially the same reaction conditions, a conventional batch reaction was not able to achieve the same degree of FAME purity. The effect of the fatty acid composition of the lipid feedstocks on the FAME purity was also shown. It was demonstrated that, due to the fatty acid composition, FAME from virgin soybean oil and virgin canola oil was produced in the membrane reactor within ASTM specifications even without a water washing step

  8. Weight Loss

    Science.gov (United States)

    ... Rights Employment Discrimination Health Care Professionals Law Enforcement Driver's License For Lawyers Food & Fitness Home Food MyFoodAdvisor ... Fit Types of Activity Weight Loss Assess Your Lifestyle Getting Started Food Choices In My Community Home ...

  9. Reactor performance and microbial community dynamics during anaerobic co-digestion of municipal wastewater sludge with restaurant grease waste at steady state and overloading stages.

    Science.gov (United States)

    Razaviarani, Vahid; Buchanan, Ian D

    2014-11-01

    Linkage between reactor performance and microbial community dynamics was investigated during mesophilic anaerobic co-digestion of restaurant grease waste (GTW) with municipal wastewater sludge (MWS) using 10L completely mixed reactors and a 20day SRT. Test reactors received a mixture of GTW and MWS while control reactors received only MWS. Addition of GTW to the test reactors enhanced the biogas production and methane yield by up to 65% and 120%, respectively. Pyrosequencing revealed that Methanosaeta and Methanomicrobium were the dominant acetoclastic and hydrogenotrophic methanogen genera, respectively, during stable reactor operation. The number of Methanosarcina and Methanomicrobium sequences increased and that of Methanosaeta declined when the proportion of GTW in the feed was increased to cause an overload condition. Under this overload condition, the pH, alkalinity and methane production decreased and VFA concentrations increased dramatically. Candidatus cloacamonas, affiliated within phylum Spirochaetes, were the dominant bacterial genus at all reactor loadings. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Healthy Weight

    Science.gov (United States)

    ... such diets limit your nutritional intake, can be unhealthy, and tend to fail in the long run. The key to achieving and maintaining a healthy weight isn't about short-term dietary changes. It's about a lifestyle that includes healthy eating, regular physical activity, and ...

  11. Weighted approximation with varying weight

    CERN Document Server

    Totik, Vilmos

    1994-01-01

    A new construction is given for approximating a logarithmic potential by a discrete one. This yields a new approach to approximation with weighted polynomials of the form w"n"(" "= uppercase)P"n"(" "= uppercase). The new technique settles several open problems, and it leads to a simple proof for the strong asymptotics on some L p(uppercase) extremal problems on the real line with exponential weights, which, for the case p=2, are equivalent to power- type asymptotics for the leading coefficients of the corresponding orthogonal polynomials. The method is also modified toyield (in a sense) uniformly good approximation on the whole support. This allows one to deduce strong asymptotics in some L p(uppercase) extremal problems with varying weights. Applications are given, relating to fast decreasing polynomials, asymptotic behavior of orthogonal polynomials and multipoint Pade approximation. The approach is potential-theoretic, but the text is self-contained.

  12. A full-scale UASB reactor for treatment of pig and cattle slaughterhouse wastewater with a high oil and grease content

    Directory of Open Access Journals (Sweden)

    L. A. S. Miranda

    2005-12-01

    Full Text Available This paper discusses the performance of an 800m³ full-scale UASB reactor in treating meat-packing plant and slaughterhouse effluents containing high concentrations of oil and grease (O&G (413-645 mg/L, resulting in a COD/O&G ratio of 26-32%. Those macromolecules were considered responsible for the unbalance of the system resulting in a total washout of the biomass. The removal of O&G from the influent using a physicochemical system (coagulation-flocculation improved the physical characteristics of the anaerobic sludge, controlling the biomass washout. Reactor performance was significantly improved when the COD/O&G ratio influent was maintained in the 10%. The COD and O&G removal rates obtained after implantation of the physicochemical system were 70-92% and 27-58%, respectively. The specific methanogenic activity (SMA of the biomass shows towards a tendency stabilisation and adaptation to the substrate influent. Pretreatment of the influent allowed the maximum organic load to be increased (1.46 to 2.43 Kg COD/m³.d and improved the quality of the effluent.

  13. Etude du point critique des paliers lisses alimentés à la graisse Study of Critical Point on Plain Bearings Lubricated by Grease

    Directory of Open Access Journals (Sweden)

    Delneuville P.

    2006-11-01

    Full Text Available Cet article est essentiellement consacré à l'étude du fonctionnement limite des paliers lisses lubrifiés à la graisse ; son but est de permettre la détermination des conditions nécessaires à l'obtention d'un film lubrifiant d'épaisseur suffisante. L'auteur cherche à cette occasion une loi théorique qui permet de départager les régimes de lubrification, non plus empiriquement, mais sur la base de lois statistiques. La formulation finale doit permettre aux utilisateurs de situer correctement les conditions de fonctionnement d'un palier lisse et d'en estimer la sécurité du régime. This article deals essentially with the boundary behaviour of plain bearings lubricated by grease. Its aim is to determine the conditions required to obtain a sufficiently thick lubricating film. The author proposes a theoretical law for separating lubrication types. This law is not empirical but is based on statistical laws. The final formulation should enable users to correctly situate the operating conditions of a plain bearing and to evaluate the safety factor during running.

  14. Dual-fuel production from restaurant grease trap waste: bio-fuel oil extraction and anaerobic methane production from the post-extracted residue.

    Science.gov (United States)

    Kobayashi, Takuro; Kuramochi, Hidetoshi; Maeda, Kouji; Tsuji, Tomoya; Xu, Kaiqin

    2014-10-01

    An effective way for restaurant grease trap waste (GTW) treatment to generate fuel oil and methane by the combination of physiological and biological processes was investigated. The heat-driven extraction could provide a high purity oil equivalent to an A-grade fuel oil of Japanese industrial standard with 81-93 wt% of extraction efficiency. A post-extracted residue was treated as an anaerobic digestion feedstock, and however, an inhibitory effect of long chain fatty acid (LCFA) was still a barrier for high-rate digestion. From the semi-continuous experiment fed with the residual sludge as a single substrate, it can be concluded that the continuous addition of calcium into the reactor contributed to reducing LCFA inhibition, resulting in the long-term stable operation over one year. Furthermore, the anaerobic reactor performed well with 70-80% of COD reduction and methane productivity under an organic loading rate up to 5.3g-COD/L/d. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Overweight, Obesity, and Weight Loss

    Science.gov (United States)

    ... Back to section menu Healthy Weight Weight and obesity Underweight Weight, fertility, and pregnancy Weight loss and ... section Home Healthy Weight Healthy Weight Weight and obesity Underweight Weight, fertility, and pregnancy Weight loss and ...

  16. Performance and emission analysis on blends of diesel, restaurant yellow grease and n-pentanol in direct-injection diesel engine.

    Science.gov (United States)

    Ravikumar, J; Saravanan, S

    2017-02-01

    Yellow grease from restaurants is typically waste cooking oil (WCO) free from suspended food particles with free fatty acid (FFA) content less than 15%. This study proposes an approach to formulate a renewable, eco-friendly fuel by recycling WCO with diesel (D) and n-pentanol (P) to improve fuel-spray characteristics. Three ternary blends (D50-WCO45-P5, D50-WCO40-P10 and D50-WCO30-P20) were selected based on the stability tests and prepared with an objective to substitute diesel by 50% with up to 45% recycled component (WCO) and up to 20% bio-component (n-pentanol) by volume. The fuel properties of these ternary blends were measured and compared. The emission impacts of these blends on a diesel engine were analysed in comparison with diesel and D50-WCO50 (50% of diesel + 50% of WCO) under naturally articulated and EGR (exhaust gas recirculation) approaches. Doping of n-pentanol showed improved fuel properties when compared to D50-WCO50. Viscosity is reduced up to 45%. Cetane number and density were comparable to that of diesel. Addition of n-pentanol to D50-WCO50 presented improved brake specific fuel consumption (BSFC) for all ternary blends. Brake thermal efficiency (BTE) of D50-WCO30-P20 blend is comparable to diesel due to improved atomization. Smoke opacity reduced, HC emissions increased and CO emissions remained unchanged with doping n-pentanol in the WCO. NOx emission increases with increase in n-pentanol and remained lower than diesel and all load conditions. However, NOx can be decreased by up to threefold using EGR. By adopting this approach, WCO can be effectively reused as a clean energy source by negating environmental hazards before and after its use in diesel engines, instead of being dumped into sewers and landfills.

  17. Influence of fat and oil type on the yield, physico-chemical properties, and microstructure of fat, oil, and grease (FOG) deposits.

    Science.gov (United States)

    Del Mundo, Dann Marie N; Sutheerawattananonda, Manote

    2017-11-01

    Fat, oil, and grease (FOG) deposit, in the form of calcium soap, was found to cause sanitary sewer overflows due to its adhesion on pipe walls. To address this problem, laboratory-prepared calcium soaps have been used to investigate the formation mechanisms of FOG deposits. However, the fats and oils previously utilized were limited and some soap characteristics were not examined. This research attempted to probe through the properties of calcium soaps prepared from calcium chloride and the fats and oils of chicken, pork, palm olein, soybean, olive, and coconut to further understand FOG formation and stability. Results revealed that FOG deposits may occur as smooth, paste-like material or coarse, semi-solid substance depending on their exposure to excess fat/oil and calcium. The smooth soaps with more excess fat/oil demonstrated high apparent viscosity and consistency index, while the coarse soaps with large levels of calcium signified higher melting endset. Moreover, a soap microstructure showing evident networks and lesser void area displayed higher heat and rheological stability, respectively. Overall, fats and oils with higher oleic to palmitic acid ratio such as palm olein oil, olive oil, chicken fat, and pork fat produced soaps with greater yield and degree of saponification. Hence, establishments and authorities should be alert in managing and monitoring these wastes. On the other hand, soybean oil high in linoleic acid and coconut oil high in lauric acid do not pose an immediate threat to the sewer system since they only produced soaps in small quantity. However, their soaps showed high melting endset which could pose a serious effect when accumulated at large amount. On the whole, the fatty acid profile of fats and oils, the presence of excess fat/oil, and calcium content mainly dictate the appearance, melting, rheology, and microstructure of calcium soaps. Their distinct properties can be used as criteria in predicting the condition and stability of FOG

  18. Weight Loss Surgery

    Science.gov (United States)

    Weight loss surgery helps people with extreme obesity to lose weight. It may be an option if you cannot lose weight ... obesity. There are different types of weight loss surgery. They often limit the amount of food you ...

  19. Mindfulness Approaches and Weight Loss, Weight Maintenance, and Weight Regain.

    Science.gov (United States)

    Dunn, Carolyn; Haubenreiser, Megan; Johnson, Madison; Nordby, Kelly; Aggarwal, Surabhi; Myer, Sarah; Thomas, Cathy

    2018-03-01

    There is an urgent need for effective weight management techniques, as more than one third of US adults are overweight or obese. Recommendations for weight loss include a combination of reducing caloric intake, increasing physical activity, and behavior modification. Behavior modification includes mindful eating or eating with awareness. The purpose of this review was to summarize the literature and examine the impact of mindful eating on weight management. The practice of mindful eating has been applied to the reduction of food cravings, portion control, body mass index, and body weight. Past reviews evaluating the relationship between mindfulness and weight management did not focus on change in mindful eating as the primary outcome or mindful eating as a measured variable. This review demonstrates strong support for inclusion of mindful eating as a component of weight management programs and may provide substantial benefit to the treatment of overweight and obesity.

  20. Weight Gain during Pregnancy

    Science.gov (United States)

    ... Global Map Premature Birth Report Cards Careers Archives Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal ... fitness > Weight gain during pregnancy Weight gain during pregnancy E-mail to a friend Please fill in ...

  1. Should I Gain Weight?

    Science.gov (United States)

    ... Videos for Educators Search English Español Should I Gain Weight? KidsHealth / For Teens / Should I Gain Weight? ... something about it. Why Do People Want to Gain Weight? Some of the reasons people give for ...

  2. Hydrothermal synthesis of copper zirconium phosphate hydrate [Cu(OH)2Zr(HPO4)2·2H2O] and an investigation of its lubrication properties in grease.

    Science.gov (United States)

    Zhang, Xiaosheng; Xu, Hong; Zuo, Zhijun; Lin, Zhi; Ferdov, Stanislav; Dong, Jinxiang

    2013-08-28

    Copper zirconium phosphate hydrate (Cu(OH)2Zr(HPO4)2·2H2O, hereafter referred to as Cu-α-ZrP) with high crystallinity was directly synthesized in a NaF-CuO-ZrO-P2O5-H2O system under hydrothermal conditions. The copper ion was confirmed to be an exchangeable cation in the Cu-α-ZrP through elemental analysis and a proton ion exchange process. The crystal structure of the Cu-α-ZrP was determined ab initio by using X-ray powder diffraction data. In the structure, the CuO6 octahedron would be located in an exchangeable atom position. Moreover, Cu-α-ZrP was evaluated as an additive in grease in a four ball test. The maximum nonseizure load (PB, representing the load-carrying capacity) of the base grease containing Cu-α-ZrP was increased from 353 to 1235 N. The excellent load-carrying capacity may be explained by the easier adherence of the material to the worn surface forming a tight protective film.

  3. Propiedades fisicoquímicas y tribológicas de una grasa grafitada de Jatropha curcas L y jabón de litio//Physicochemical and tribological properties of graphite grease based on Jatrophacurcas L oil and lithium soap

    Directory of Open Access Journals (Sweden)

    Juliano‐Chitue de Assunção‐Nascimento

    2014-08-01

    Full Text Available Las grasas lubricantes son consideradas una dispersión coloidal de un espesante en un fluido lubricante. Los aceites vegetales son ampliamente usados en muchas formulaciones de grasas. En este trabajo se determinaron las propiedades fisicoquímicas y tribológicas de una grasa lubricante fabricada con aceite vegetal de Jatropha curcas L y jabón de litio (JC1G5. Alfa tocoferol acetato y grafito fueron usados como aditivos antioxidante y de extrema presión respectivamente. La grasa JC1G5 mostró un color negro, una temperatura de goteo de 140 oC, apropiadas propiedades de corrosión al cobre y un grado de consistencia NLGI Grado1. El efecto de la lubricación de la grasa JC1G5 fue probado, empleando una máquina de cuatro bolas y un tribómetro timken. Los resultados indican que la grasa JC1G5 posee propiedades tribológicas comparables con una grasa mineral de jabón de litio.Palabras claves: grasa, jatropha curcas L, jabón de litio, propiedades fisicoquímicas, propiedades tribológicas.______________________________________________________________________________AbstractLubricating greases are considered as colloidal dispersions of a thickener in a lubricating fluid. The vegetable oils are widely used in many formulations of greases. In this paper were determined the physicochemical and tribological properties of graphite grease based on Jatropha curcas L vegetableoil and lithium soap (JC1G5. Alpha tocofherol acetate and graphite were used as antioxidant and extreme pressure additives respectively. The grease JC1G5 showed a black color, a dropping point of 140 oC, appropriate magnitude of copper corrosion and consistency NLGI Grade 1. Lubrication performance of the grease JC1G5 was tested using the 4-ball wear tester and timken tribometer tester. Results indicate that the grease JC1G5 has tribological properties comparable to that of mineral oil base lithium grease.Key words: grease, jatrophacurcas L, lithium soap, physicochemical

  4. Mechanisms of Weight Regain following Weight Loss.

    Science.gov (United States)

    Blomain, Erik Scott; Dirhan, Dara Anne; Valentino, Michael Anthony; Kim, Gilbert Won; Waldman, Scott Arthur

    2013-01-01

    Obesity is a world-wide pandemic and its incidence is on the rise along with associated comorbidities. Currently, there are few effective therapies to combat obesity. The use of lifestyle modification therapy, namely, improvements in diet and exercise, is preferable over bariatric surgery or pharmacotherapy due to surgical risks and issues with drug efficacy and safety. Although they are initially successful in producing weight loss, such lifestyle intervention strategies are generally unsuccessful in achieving long-term weight maintenance, with the vast majority of obese patients regaining their lost weight during followup. Recently, various compensatory mechanisms have been elucidated by which the body may oppose new weight loss, and this compensation may result in weight regain back to the obese baseline. The present review summarizes the available evidence on these compensatory mechanisms, with a focus on weight loss-induced changes in energy expenditure, neuroendocrine pathways, nutrient metabolism, and gut physiology. These findings have added a major focus to the field of antiobesity research. In addition to investigating pathways that induce weight loss, the present work also focuses on pathways that may instead prevent weight regain. Such strategies will be necessary for improving long-term weight loss maintenance and outcomes for patients who struggle with obesity.

  5. Proven Weight Loss Methods

    Science.gov (United States)

    Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. It can lower ... at www.hormone.org/Spanish . Proven Weight Loss Methods Fact Sheet www.hormone.org

  6. Differences in nitrogen and urea metabolism between goats bred for ...

    African Journals Online (AJOL)

    This experiment was conducted to determine whether selection for fleece weight is accompanied by changes in the efficiency of nitrogen utilization, using Angora and Boer goats as models of animals bred for fleece or meat production respectively. A diet, containing a protein: energy ratio of 12 g CP/ MJ ME, was fed at ...

  7. Weighted network modules

    International Nuclear Information System (INIS)

    Farkas, Illes; Abel, Daniel; Palla, Gergely; Vicsek, Tamas

    2007-01-01

    The inclusion of link weights into the analysis of network properties allows a deeper insight into the (often overlapping) modular structure of real-world webs. We introduce a clustering algorithm clique percolation method with weights (CPMw) for weighted networks based on the concept of percolating k-cliques with high enough intensity. The algorithm allows overlaps between the modules. First, we give detailed analytical and numerical results about the critical point of weighted k-clique percolation on (weighted) Erdos-Renyi graphs. Then, for a scientist collaboration web and a stock correlation graph we compute three-link weight correlations and with the CPMw the weighted modules. After reshuffling link weights in both networks and computing the same quantities for the randomized control graphs as well, we show that groups of three or more strong links prefer to cluster together in both original graphs

  8. Preventing Weight Gain

    Science.gov (United States)

    ... Local Programs Related Topics Diabetes Nutrition Preventing Weight Gain Language: English (US) Español (Spanish) Recommend on Facebook ... cancer. Choosing an Eating Plan to Prevent Weight Gain So, how do you choose a healthful eating ...

  9. Weight management in pregnancy

    OpenAIRE

    Olander, E. K.

    2015-01-01

    Key learning points:\\ud - Women who start pregnancy in an overweight or obese weight category have increased health risks\\ud - Irrespective of pre-pregnancy weight category, there are health risks associated with gaining too much weight in pregnancy for both mother and baby\\ud - There are currently no official weight gain guidelines for pregnancy in the UK, thus focus needs to be on supporting pregnant women to eat healthily and keep active

  10. Evaluation of oil and grease removal by adsorptive polymeric resins in semi-industrial scale: influence of temperature; Avaliacao da remocao de oleos e graxas por resinas polimericas adsorventes em escala semi-industrial: influencia da temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luis F.S. de; Silva, Carla M.F. da; Queiros, Yure G.C.; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas, Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, Rio de Janeiro, RJ (Brazil)], e-mail: elucas@ima.ufrj.br

    2011-07-01

    The aim of this study was to evaluate the performance of polymeric resins packed in a fixed bed eluted in semi-industrial scale for oil and greases removal disposed in synthetic oily water in different temperature conditions. For this work, columns packed with vinyl and acryl polymer-base were tested and their efficiency of oil removal was evaluated by fluorimetry technique in two different temperatures: 25 and 60 deg C, in a flow rate condition of 200 mL/min. The experimental results were very good: the removal efficiencies were above 98% in both cases. At 60 deg C, the system keep the efficiency for a longer time: no significant loss in the efficiency was observed after eluting 1,000 times of the column bed volume at 25 deg C and 2,000, at 60 deg C. This result characterizes a great potential of application in the industry. (author)

  11. Gradient Weight in Phonology

    Science.gov (United States)

    Ryan, Kevin Michael

    2011-01-01

    Research on syllable weight in generative phonology has focused almost exclusively on systems in which weight is treated as an ordinal hierarchy of clearly delineated categories (e.g. light and heavy). As I discuss, canonical weight-sensitive phenomena in phonology, including quantitative meter and quantity-sensitive stress, can also treat weight…

  12. Gestational weight gain.

    Science.gov (United States)

    Kominiarek, Michelle A; Peaceman, Alan M

    2017-12-01

    Prenatal care providers are advised to evaluate maternal weight at each regularly scheduled prenatal visit, monitor progress toward meeting weight gain goals, and provide individualized counseling if significant deviations from a woman's goals occur. Today, nearly 50% of women exceed their weight gain goals with overweight and obese women having the highest prevalence of excessive weight gain. Risks of inadequate weight gain include low birthweight and failure to initiate breast-feeding whereas the risks of excessive weight gain include cesarean deliveries and postpartum weight retention for the mother and large-for-gestational-age infants, macrosomia, and childhood overweight or obesity for the offspring. Prenatal care providers have many resources and tools to incorporate weight and other health behavior counseling into routine prenatal practices. Because many women are motivated to improve health behaviors, pregnancy is often considered the optimal time to intervene for issues related to eating habits and physical activity to prevent excessive weight gain. Gestational weight gain is a potentially modifiable risk factor for a number of adverse maternal and neonatal outcomes and meta-analyses of randomized controlled trials report that diet or exercise interventions during pregnancy can help reduce excessive weight gain. However, health behavior interventions for gestational weight gain have not significantly improved other maternal and neonatal outcomes and have limited effectiveness in overweight and obese women. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Thyroid weight with age

    International Nuclear Information System (INIS)

    Raulier-Fabry, C.; Hammer, R.

    1965-01-01

    A large number of data on thyroid weight of euthyroid subjects have been collected from the literature in this study. The most probable average weight of the gland appears to be 20 g in the adult and 2 g in the newborn. A decrease in weight has been observed during the first year of life (1 g at 6 months) and only in the second year of life the initial birth weight is reached again. The weight curve may be considered as consisting of three straight lines: from 2 to 7, from 7 to 18 and from 18 to 25 years, their slopes being respectively 0.6, 0.9 and 0.5 g/year. The variations in weight of the thyroid during adulthood are sufficiently small to consider it as having constant value between 25 and 55 years. The available information points to a negligible weight difference between sexes. (authors) [fr

  14. Yogurt and weight management.

    Science.gov (United States)

    Jacques, Paul F; Wang, Huifen

    2014-05-01

    A large body of observational studies and randomized controlled trials (RCTs) has examined the role of dairy products in weight loss and maintenance of healthy weight. Yogurt is a dairy product that is generally very similar to milk, but it also has some unique properties that may enhance its possible role in weight maintenance. This review summarizes the human RCT and prospective observational evidence on the relation of yogurt consumption to the management and maintenance of body weight and composition. The RCT evidence is limited to 2 small, short-term, energy-restricted trials. They both showed greater weight losses with yogurt interventions, but the difference between the yogurt intervention and the control diet was only significant in one of these trials. There are 5 prospective observational studies that have examined the association between yogurt and weight gain. The results of these studies are equivocal. Two of these studies reported that individuals with higher yogurt consumption gained less weight over time. One of these same studies also considered changes in waist circumference (WC) and showed that higher yogurt consumption was associated with smaller increases in WC. A third study was inconclusive because of low statistical power. A fourth study observed no association between changes in yogurt intake and weight gain, but the results suggested that those with the largest increases in yogurt intake during the study also had the highest increase in WC. The final study examined weight and WC change separately by sex and baseline weight status and showed benefits for both weight and WC changes for higher yogurt consumption in overweight men, but it also found that higher yogurt consumption in normal-weight women was associated with a greater increase in weight over follow-up. Potential underlying mechanisms for the action of yogurt on weight are briefly discussed.

  15. Predictors of weight maintenance

    NARCIS (Netherlands)

    Pasman, W.J.; Saris, W.H.M.; Westerterp-Plantenga, M.S.

    1999-01-01

    Objective: To obtain predictors of weight maintenance after a weight-loss intervention. Research Methods and Procedures: An overall analysis of data from two-long intervention studies [n = 67 women; age: 37.9±1.0 years; body weight (BW): 87.0±1.2 kg; body mass index: 32.1±0.5 kg·m-2; % body fat:

  16. Robustness of weighted networks

    Science.gov (United States)

    Bellingeri, Michele; Cassi, Davide

    2018-01-01

    Complex network response to node loss is a central question in different fields of network science because node failure can cause the fragmentation of the network, thus compromising the system functioning. Previous studies considered binary networks where the intensity (weight) of the links is not accounted for, i.e. a link is either present or absent. However, in real-world networks the weights of connections, and thus their importance for network functioning, can be widely different. Here, we analyzed the response of real-world and model networks to node loss accounting for link intensity and the weighted structure of the network. We used both classic binary node properties and network functioning measure, introduced a weighted rank for node importance (node strength), and used a measure for network functioning that accounts for the weight of the links (weighted efficiency). We find that: (i) the efficiency of the attack strategies changed using binary or weighted network functioning measures, both for real-world or model networks; (ii) in some cases, removing nodes according to weighted rank produced the highest damage when functioning was measured by the weighted efficiency; (iii) adopting weighted measure for the network damage changed the efficacy of the attack strategy with respect the binary analyses. Our results show that if the weighted structure of complex networks is not taken into account, this may produce misleading models to forecast the system response to node failure, i.e. consider binary links may not unveil the real damage induced in the system. Last, once weighted measures are introduced, in order to discover the best attack strategy, it is important to analyze the network response to node loss using nodes rank accounting the intensity of the links to the node.

  17. Weighted Bergman Kernels for Logarithmic Weights

    Czech Academy of Sciences Publication Activity Database

    Engliš, Miroslav

    2010-01-01

    Roč. 6, č. 3 (2010), s. 781-813 ISSN 1558-8599 R&D Projects: GA AV ČR IAA100190802 Keywords : Bergman kernel * Toeplitz operator * logarithmic weight * pseudodifferential operator Subject RIV: BA - General Mathematics Impact factor: 0.462, year: 2010 http://www.intlpress.com/site/pub/pages/journals/items/pamq/content/vols/0006/0003/a008/

  18. Body Weight - Multiple Languages

    Science.gov (United States)

    ... Supplements Videos & Tools You Are Here: Home → Multiple Languages → All Health Topics → Body Weight URL of this page: https://medlineplus.gov/ ... V W XYZ List of All Topics All Body Weight - Multiple Languages To use the sharing features on this page, ...

  19. Concurrent weighted logic

    DEFF Research Database (Denmark)

    Xue, Bingtian; Larsen, Kim Guldstrand; Mardare, Radu Iulian

    2015-01-01

    We introduce Concurrent Weighted Logic (CWL), a multimodal logic for concurrent labeled weighted transition systems (LWSs). The synchronization of LWSs is described using dedicated functions that, in various concurrency paradigms, allow us to encode the compositionality of LWSs. To reflect these......-completeness results for this logic. To complete these proofs we involve advanced topological techniques from Model Theory....

  20. Unexplained Weight Loss

    Science.gov (United States)

    ... weight is affected by your calorie intake, activity level, overall health, age, nutrient absorption, and economic and social factors. If you're losing weight without trying and you're concerned about it, consult your doctor — as a rule of thumb, losing more than 5 ...

  1. Thyroid and Weight

    Science.gov (United States)

    ... Hypothyroidism in Children and Adolescents Pediatric Differentiated Thyroid Cancer Thyroid Nodules in Children and Adolescents Thyroid and Weight Resources Thyroid and Weight Brochure PDF En Español La Tiroides y el Peso El folleto de La Tiroides y el ...

  2. Adolescent Weight Status

    DEFF Research Database (Denmark)

    Hjort Kjelldgaard, Heidi; Holstein, Bjørn Evald; Due, Pernille

    2017-01-01

    day) communication with friends through cellphones, SMS messages, or Internet (1.66, 1.03-2.67). In the full population, overweight/obese weight status was associated with not perceiving best friend as a confidant (1.59, 1.11-2.28). No associations were found between weight status and number of close...

  3. Isotopes and atomic weights

    International Nuclear Information System (INIS)

    Zhang Qinglian

    1990-01-01

    A review of the chemical and mass spectrometric methods of determining the atomic weights of elements is presented. A, special discussion is devoted to the calibration of the mass spectrometer with highly enriched isotopes. It is illustrated by the recent work on europium. How to choose the candidate element for new atomic weight determination forms the last section of the article

  4. Reciprocity of weighted networks.

    Science.gov (United States)

    Squartini, Tiziano; Picciolo, Francesco; Ruzzenenti, Franco; Garlaschelli, Diego

    2013-01-01

    In directed networks, reciprocal links have dramatic effects on dynamical processes, network growth, and higher-order structures such as motifs and communities. While the reciprocity of binary networks has been extensively studied, that of weighted networks is still poorly understood, implying an ever-increasing gap between the availability of weighted network data and our understanding of their dyadic properties. Here we introduce a general approach to the reciprocity of weighted networks, and define quantities and null models that consistently capture empirical reciprocity patterns at different structural levels. We show that, counter-intuitively, previous reciprocity measures based on the similarity of mutual weights are uninformative. By contrast, our measures allow to consistently classify different weighted networks according to their reciprocity, track the evolution of a network's reciprocity over time, identify patterns at the level of dyads and vertices, and distinguish the effects of flux (im)balances or other (a)symmetries from a true tendency towards (anti-)reciprocation.

  5. Weight discrimination and bullying.

    Science.gov (United States)

    Puhl, Rebecca M; King, Kelly M

    2013-04-01

    Despite significant attention to the medical impacts of obesity, often ignored are the negative outcomes that obese children and adults experience as a result of stigma, bias, and discrimination. Obese individuals are frequently stigmatized because of their weight in many domains of daily life. Research spanning several decades has documented consistent weight bias and stigmatization in employment, health care, schools, the media, and interpersonal relationships. For overweight and obese youth, weight stigmatization translates into pervasive victimization, teasing, and bullying. Multiple adverse outcomes are associated with exposure to weight stigmatization, including depression, anxiety, low self-esteem, body dissatisfaction, suicidal ideation, poor academic performance, lower physical activity, maladaptive eating behaviors, and avoidance of health care. This review summarizes the nature and extent of weight stigmatization against overweight and obese individuals, as well as the resulting consequences that these experiences create for social, psychological, and physical health for children and adults who are targeted. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. ORDERED WEIGHTED DISTANCE MEASURE

    Institute of Scientific and Technical Information of China (English)

    Zeshui XU; Jian CHEN

    2008-01-01

    The aim of this paper is to develop an ordered weighted distance (OWD) measure, which is thegeneralization of some widely used distance measures, including the normalized Hamming distance, the normalized Euclidean distance, the normalized geometric distance, the max distance, the median distance and the min distance, etc. Moreover, the ordered weighted averaging operator, the generalized ordered weighted aggregation operator, the ordered weighted geometric operator, the averaging operator, the geometric mean operator, the ordered weighted square root operator, the square root operator, the max operator, the median operator and the min operator axe also the special cases of the OWD measure. Some methods depending on the input arguments are given to determine the weights associated with the OWD measure. The prominent characteristic of the OWD measure is that it can relieve (or intensify) the influence of unduly large or unduly small deviations on the aggregation results by assigning them low (or high) weights. This desirable characteristic makes the OWD measure very suitable to be used in many actual fields, including group decision making, medical diagnosis, data mining, and pattern recognition, etc. Finally, based on the OWD measure, we develop a group decision making approach, and illustrate it with a numerical example.

  7. Light-weight plastination.

    Science.gov (United States)

    Steinke, Hanno; Rabi, Suganthy; Saito, Toshiyuki; Sawutti, Alimjan; Miyaki, Takayoshi; Itoh, Masahiro; Spanel-Borowski, Katharina

    2008-11-20

    Plastination is an excellent technique which helps to keep the anatomical specimens in a dry, odourless state. Since the invention of plastination technique by von Hagens, research has been done to improve the quality of plastinated specimens. In this paper, we have described a method of producing light-weight plastinated specimens using xylene along with silicone and in the final step, substitute xylene with air. The finished plastinated specimens were light-weight, dry, odourless and robust. This method requires less use of resin thus making the plastination technique more cost-effective. The light-weight specimens are easy to carry and can easily be used for teaching.

  8. Antidepressants and Weight Gain

    Science.gov (United States)

    ... 2015;37:46. Blumenthal SR, et al. An electronic health records study of long-term weight gain following antidepressant ... your agreement to the Terms and Conditions and Privacy Policy linked below. Terms and Conditions Privacy Policy ...

  9. Weight gain - unintentional

    Science.gov (United States)

    ... diabetes Hormone changes or medical problems can also cause unintentional weight gain. This may be due to: Cushing syndrome Underactive thyroid, or low thyroid (hypothyroidism) Polycystic ovary syndrome Menopause Pregnancy Bloating, or swelling ...

  10. Weight and psychiatry

    African Journals Online (AJOL)

    Adele

    Beyond the physical aspects of weight, the psychological mean- ing sees the virtues of ... sion in the development and persistence of adolescent obesity. Pediat- rics 2002 ... or secondary as in mood, anxiety or psychotic disorders. II. a related.

  11. birth-weight infants

    African Journals Online (AJOL)

    including the CRIB (Clinical Risk Index for Babies) score, in a local ... these babies for expensive tertiary care. Subjects. ... patient numbers, the tendency is simply to increase the ... included birth weight, gestational age, 5-minute Apgar score ...

  12. Weight loss and alcohol

    Science.gov (United States)

    ... Maclean JC. Alcohol consumption and body weight. Health Econ . 2010;19(7):814-832. PMID: 19548203 www. ... member of Hi-Ethics and subscribes to the principles of the Health on the Net Foundation (www. ...

  13. Effects of ultrasonic and thermo-chemical pre-treatments on methane production from fat, oil and grease (FOG) and synthetic kitchen waste (KW) in anaerobic co-digestion.

    Science.gov (United States)

    Li, Chenxi; Champagne, Pascale; Anderson, Bruce C

    2013-02-01

    The effects of ultrasonic and thermo-chemical pre-treatments on the methane production potential of anaerobic co-digestion with synthetic kitchen waste (KW) or fat, oil and grease (FOG) were investigated. Non-linear regressions were fitted to accurately assess and compare the methane production from co-digestion under the various pre-treatment conditions and to achieve representative simulations and predictions. Ultrasonic pre-treatment was not found to improve methane production effectively from either FOG co-digestion or KW co-digestions. Thermo-chemical pre-treatment could increase methane production yields from both FOG and KW co-digestions. COD solubilization was found to effectively represent the effects of pre-treatment. A comprehensive evaluation indicated that the thermo-chemical pre-treatments of pH=10, 55°C and pH=8, 55°C provided the best conditions to increase methane production from FOG and KW co-digestions, respectively. The most effective enhancement of biogas production (288±0.85mLCH(4)/g TVS) was achieved from thermo-chemically pre-treated FOG co-digestion, which was 9.9±1.5% higher than FOG co-digestion without thermo-chemical pre-treatment. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Weight Loss Nutritional Supplements

    Science.gov (United States)

    Eckerson, Joan M.

    Obesity has reached what may be considered epidemic proportions in the United States, not only for adults but for children. Because of the medical implications and health care costs associated with obesity, as well as the negative social and psychological impacts, many individuals turn to nonprescription nutritional weight loss supplements hoping for a quick fix, and the weight loss industry has responded by offering a variety of products that generates billions of dollars each year in sales. Most nutritional weight loss supplements are purported to work by increasing energy expenditure, modulating carbohydrate or fat metabolism, increasing satiety, inducing diuresis, or blocking fat absorption. To review the literally hundreds of nutritional weight loss supplements available on the market today is well beyond the scope of this chapter. Therefore, several of the most commonly used supplements were selected for critical review, and practical recommendations are provided based on the findings of well controlled, randomized clinical trials that examined their efficacy. In most cases, the nutritional supplements reviewed either elicited no meaningful effect or resulted in changes in body weight and composition that are similar to what occurs through a restricted diet and exercise program. Although there is some evidence to suggest that herbal forms of ephedrine, such as ma huang, combined with caffeine or caffeine and aspirin (i.e., ECA stack) is effective for inducing moderate weight loss in overweight adults, because of the recent ban on ephedra manufacturers must now use ephedra-free ingredients, such as bitter orange, which do not appear to be as effective. The dietary fiber, glucomannan, also appears to hold some promise as a possible treatment for weight loss, but other related forms of dietary fiber, including guar gum and psyllium, are ineffective.

  15. Genome-Wide Association Studies Identify Candidate Genes for Coat Color and Mohair Traits in the Iranian Markhoz Goat.

    Science.gov (United States)

    Nazari-Ghadikolaei, Anahit; Mehrabani-Yeganeh, Hassan; Miarei-Aashtiani, Seyed R; Staiger, Elizabeth A; Rashidi, Amir; Huson, Heather J

    2018-01-01

    The Markhoz goat provides an opportunity to study the genetics underlying coat color and mohair traits of an Angora type goat using genome-wide association studies (GWAS). This indigenous Iranian breed is valued for its quality mohair used in ceremonial garments and has the distinction of exhibiting an array of coat colors including black, brown, and white. Here, we performed 16 GWAS for different fleece (mohair) traits and coat color in 228 Markhoz goats sampled from the Markhoz Goat Research Station in Sanandaj, Kurdistan province, located in western Iran using the Illumina Caprine 50K beadchip. The Efficient Mixed Model Linear analysis was used to identify genomic regions with potential candidate genes contributing to coat color and mohair characteristics while correcting for population structure. Significant associations to coat color were found within or near the ASIP, ITCH, AHCY , and RALY genes on chromosome 13 for black and brown coat color and the KIT and PDGFRA genes on chromosome 6 for white coat color. Individual mohair traits were analyzed for genetic association along with principal components that allowed for a broader perspective of combined traits reflecting overall mohair quality and volume. A multitude of markers demonstrated significant association to mohair traits highlighting potential candidate genes of POU1F1 on chromosome 1 for mohair quality, MREG on chromosome 2 for mohair volume, DUOX1 on chromosome 10 for yearling fleece weight, and ADGRV1 on chromosome 7 for grease percentage. Variation in allele frequencies and haplotypes were identified for coat color and differentiated common markers associated with both brown and black coat color. This demonstrates the potential for genetic markers to be used in future breeding programs to improve selection for coat color and mohair traits. Putative candidate genes, both novel and previously identified in other species or breeds, require further investigation to confirm phenotypic causality and

  16. Genome-Wide Association Studies Identify Candidate Genes for Coat Color and Mohair Traits in the Iranian Markhoz Goat

    Directory of Open Access Journals (Sweden)

    Anahit Nazari-Ghadikolaei

    2018-04-01

    Full Text Available The Markhoz goat provides an opportunity to study the genetics underlying coat color and mohair traits of an Angora type goat using genome-wide association studies (GWAS. This indigenous Iranian breed is valued for its quality mohair used in ceremonial garments and has the distinction of exhibiting an array of coat colors including black, brown, and white. Here, we performed 16 GWAS for different fleece (mohair traits and coat color in 228 Markhoz goats sampled from the Markhoz Goat Research Station in Sanandaj, Kurdistan province, located in western Iran using the Illumina Caprine 50K beadchip. The Efficient Mixed Model Linear analysis was used to identify genomic regions with potential candidate genes contributing to coat color and mohair characteristics while correcting for population structure. Significant associations to coat color were found within or near the ASIP, ITCH, AHCY, and RALY genes on chromosome 13 for black and brown coat color and the KIT and PDGFRA genes on chromosome 6 for white coat color. Individual mohair traits were analyzed for genetic association along with principal components that allowed for a broader perspective of combined traits reflecting overall mohair quality and volume. A multitude of markers demonstrated significant association to mohair traits highlighting potential candidate genes of POU1F1 on chromosome 1 for mohair quality, MREG on chromosome 2 for mohair volume, DUOX1 on chromosome 10 for yearling fleece weight, and ADGRV1 on chromosome 7 for grease percentage. Variation in allele frequencies and haplotypes were identified for coat color and differentiated common markers associated with both brown and black coat color. This demonstrates the potential for genetic markers to be used in future breeding programs to improve selection for coat color and mohair traits. Putative candidate genes, both novel and previously identified in other species or breeds, require further investigation to confirm phenotypic

  17. Weight Management in Phenylketonuria

    DEFF Research Database (Denmark)

    Rocha, Julio César; van Rijn, Margreet; van Dam, Esther

    2016-01-01

    . It is becoming evident that in addition to acceptable blood phenylalanine control, metabolic dieticians should regard weight management as part of routine clinical practice. SUMMARY: It is important for practitioners to differentiate the 3 levels for overweight interpretation: anthropometry, body composition...... and frequency and severity of associated metabolic comorbidities. The main objectives of this review are to suggest proposals for the minimal standard and gold standard for the assessment of weight management in PKU. While the former aims to underline the importance of nutritional status evaluation in every...... specialized clinic, the second objective is important in establishing an understanding of the breadth of overweight and obesity in PKU in Europe. KEY MESSAGES: In PKU, the importance of adopting a European nutritional management strategy on weight management is highlighted in order to optimize long...

  18. Family Weight School treatment

    DEFF Research Database (Denmark)

    Nowicka, Paulina; Höglund, Peter; Pietrobelli, Angelo

    2008-01-01

    OBJECTIVE: The aim was to evaluate the efficacy of a Family Weight School treatment based on family therapy in group meetings with adolescents with a high degree of obesity. METHODS: Seventy-two obese adolescents aged 12-19 years old were referred to a childhood obesity center by pediatricians...... and school nurses and offered a Family Weight School therapy program in group meetings given by a multidisciplinary team. Intervention was compared with an untreated waiting list control group. Body mass index (BMI) and BMI z-scores were calculated before and after intervention. RESULTS: Ninety percent...... group with initial BMI z-score 3.5. CONCLUSIONS: Family Weight School treatment model might be suitable for adolescents with BMI z...

  19. Weight for Stephen Finlay.

    Science.gov (United States)

    Evers, Daan

    2013-04-01

    According to Stephen Finlay, ' A ought to X ' means that X -ing is more conducive to contextually salient ends than relevant alternatives. This in turn is analysed in terms of probability. I show why this theory of 'ought' is hard to square with a theory of a reason's weight which could explain why ' A ought to X ' logically entails that the balance of reasons favours that A X -es. I develop two theories of weight to illustrate my point. I first look at the prospects of a theory of weight based on expected utility theory. I then suggest a simpler theory. Although neither allows that ' A ought to X ' logically entails that the balance of reasons favours that A X -es, this price may be accepted. For there remains a strong pragmatic relation between these claims.

  20. Download

    African Journals Online (AJOL)

    PEN AR LAN

    4ARC Livestock Business Division: Private Bag X5013, Stellenbosch 7599, South Africa .... Corresponding coefficients of variation in the seven Australian ... Table 1 Descriptive statistics for yearling body weight and fleece traits (after editing) in ...

  1. Dairy cow disability weights.

    Science.gov (United States)

    McConnel, Craig S; McNeil, Ashleigh A; Hadrich, Joleen C; Lombard, Jason E; Garry, Franklyn B; Heller, Jane

    2017-08-01

    Over the past 175 years, data related to human disease and death have progressed to a summary measure of population health, the Disability-Adjusted Life Year (DALY). As dairies have intensified there has been no equivalent measure of the impact of disease on the productive life and well-being of animals. The development of a disease-adjusted metric requires a consistent set of disability weights that reflect the relative severity of important diseases. The objective of this study was to use an international survey of dairy authorities to derive disability weights for primary disease categories recorded on dairies. National and international dairy health and management authorities were contacted through professional organizations, dairy industry publications and conferences, and industry contacts. Estimates of minimum, most likely, and maximum disability weights were derived for 12 common dairy cow diseases. Survey participants were asked to estimate the impact of each disease on overall health and milk production. Diseases were classified from 1 (minimal adverse effects) to 10 (death). The data was modelled using BetaPERT distributions to demonstrate the variation in these dynamic disease processes, and to identify the most likely aggregated disability weights for each disease classification. A single disability weight was assigned to each disease using the average of the combined medians for the minimum, most likely, and maximum severity scores. A total of 96 respondents provided estimates of disability weights. The final disability weight values resulted in the following order from least to most severe: retained placenta, diarrhea, ketosis, metritis, mastitis, milk fever, lame (hoof only), calving trauma, left displaced abomasum, pneumonia, musculoskeletal injury (leg, hip, back), and right displaced abomasum. The peaks of the probability density functions indicated that for certain disease states such as retained placenta there was a relatively narrow range of

  2. The experience of weight management in normal weight adults.

    Science.gov (United States)

    Hernandez, Cheri Ann; Hernandez, David A; Wellington, Christine M; Kidd, Art

    2016-11-01

    No prior research has been done with normal weight persons specific to their experience of weight management. The purpose of this research was to discover the experience of weight management in normal weight individuals. Glaserian grounded theory was used. Qualitative data (focus group) and quantitative data (food diary, study questionnaire, and anthropometric measures) were collected. Weight management was an ongoing process of trying to focus on living (family, work, and social), while maintaining their normal weight targets through five consciously and unconsciously used strategies. Despite maintaining normal weights, the nutritional composition of foods eaten was grossly inadequate. These five strategies can be used to develop new weight management strategies that could be integrated into existing weight management programs, or could be developed into novel weight management interventions. Surprisingly, normal weight individuals require dietary assessment and nutrition education to prevent future negative health consequences. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. The effect of holiday weight gain on body weight.

    Science.gov (United States)

    Schoeller, Dale A

    2014-07-01

    The topic of holiday weight gain has been a frequent subject of the lay media; however, scientific interest has only been recent. Multiple studies in Western societies have reported average weight gains among adults during the period between mid-November and mid-January that were about 0.5 kg. The range in individual weight changes was large, however, and the already overweight and obese gain more weight than those who are healthy weight. When the average gain across the year was also measured, the holiday weight was the major contributor to annual excess weight gain. Efforts patterned to increase awareness to energy balance and body weight have been shown to be successful at reducing such gain. An exception to holiday weight gain being a major contributor to annual excess gain has been children, in whom summer weight gains have been observed to be the major contributor to average excess weight gain. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Compositorial 'Weight' & 'Luminance'

    NARCIS (Netherlands)

    Koenderink, Jan; van Doorn, Andrea J.; Gegenfurtner, Karl

    2017-01-01

    Compositorial weight might be understood as an operational definition of salience. It is not a psychophysical entity, but holds a key position between psychophysics and aesthetics. Several factors ranging over raw photometric/colorimetric parameters, various kinds of psychophysical contrast, image

  5. Cigarette weight control systems

    International Nuclear Information System (INIS)

    Powell, G.F.W.; Bolt, R.C.; Simmons, A.

    1980-01-01

    A system is described for monitoring the weight of a continuous wrapped rod of tobacco formed by a cigarette-making machine. A scanner unit can be used which passes beta-rays from a primary radiation source through the rod. The absorption is measured by comparison of the intensity at a detector on the opposite side of the rod with that at a detector facing another smaller source, the balance unit. This is pre-set so that when the rod weight is correct the detected intensities from the two sources will be equal. It is essential that the scanning station is kept clean otherwise the dust is included in the weight reading and the cigarettes manufactured would be underweight. This can be checked using an artificial cigarette of known weight as a calibration check. In this device a test circuit can be connected to the scanner head and this opens the shutter over the radioactive source when the test is initiated. A warning device is initiated if the reading is beyond predetermined limits and can be made to prevent operation of the cigarette machine if a satisfactory test is not obtained. (U.K.)

  6. Exponential smoothing weighted correlations

    Science.gov (United States)

    Pozzi, F.; Di Matteo, T.; Aste, T.

    2012-06-01

    In many practical applications, correlation matrices might be affected by the "curse of dimensionality" and by an excessive sensitiveness to outliers and remote observations. These shortcomings can cause problems of statistical robustness especially accentuated when a system of dynamic correlations over a running window is concerned. These drawbacks can be partially mitigated by assigning a structure of weights to observational events. In this paper, we discuss Pearson's ρ and Kendall's τ correlation matrices, weighted with an exponential smoothing, computed on moving windows using a data-set of daily returns for 300 NYSE highly capitalized companies in the period between 2001 and 2003. Criteria for jointly determining optimal weights together with the optimal length of the running window are proposed. We find that the exponential smoothing can provide more robust and reliable dynamic measures and we discuss that a careful choice of the parameters can reduce the autocorrelation of dynamic correlations whilst keeping significance and robustness of the measure. Weighted correlations are found to be smoother and recovering faster from market turbulence than their unweighted counterparts, helping also to discriminate more effectively genuine from spurious correlations.

  7. Bessel Weighted Asymmetries

    Energy Technology Data Exchange (ETDEWEB)

    Avakian, Harut [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Gamberg, Leonard [Pennsylvania State Univ., University Park, PA (United States); Rossi, Patrizia [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Prokudin, Alexei [Pennsylvania State Univ., University Park, PA (United States)

    2016-05-01

    We review the concept of Bessel weighted asymmetries for semi-inclusive deep inelastic scattering and focus on the cross section in Fourier space, conjugate to the outgoing hadron’s transverse momentum, where convolutions of transverse momentum dependent parton distribution functions and fragmentation functions become simple products. Individual asymmetric terms in the cross section can be projected out by means of a generalized set of weights involving Bessel functions. The procedure is applied to studies of the double longitudinal spin asymmetry in semi-inclusive deep inelastic scattering using a new dedicated Monte Carlo generator which includes quark intrinsic transverse momentum within the generalized parton model. We observe a few percent systematic offset of the Bessel-weighted asymmetry obtained from Monte Carlo extraction compared to input model calculations, which is due to the limitations imposed by the energy and momentum conservation at the given energy and hard scale Q2. We find that the Bessel weighting technique provides a powerful and reliable tool to study the Fourier transform of TMDs with controlled systematics due to experimental acceptances and resolutions with different TMD model inputs.

  8. Weight and weight gain during early infancy predict childhood obesity

    DEFF Research Database (Denmark)

    Andersen, Lise Geisler; Holst, Claus; Michaelsen, Kim F.

    2012-01-01

    Infant weight and weight gain are positively associated with later obesity, but whether there is a particular critical time during infancy remains uncertain.......Infant weight and weight gain are positively associated with later obesity, but whether there is a particular critical time during infancy remains uncertain....

  9. Body weight perception and body weight control behaviors in adolescents

    OpenAIRE

    Frank, Robson; Claumann, Gaia S.; Felden, Érico P.G.; Silva, Diego A.S.; Pelegrini, Andreia

    2018-01-01

    Abstract Objective: To investigate the association between the perception of body weight (as above or below the desired) and behaviors for body weight control in adolescents. Methods: This was a cross-sectional study that included 1051 adolescents (aged 15-19 years) who were high school students attending public schools. The authors collected information on the perception of body weight (dependent variable), weight control behaviors (initiative to change the weight, physical exercise, eatin...

  10. Reducing rotor weight

    Energy Technology Data Exchange (ETDEWEB)

    Cheney, M.C. [PS Enterprises, Inc., Glastonbury, CT (United States)

    1997-12-31

    The cost of energy for renewables has gained greater significance in recent years due to the drop in price in some competing energy sources, particularly natural gas. In pursuit of lower manufacturing costs for wind turbine systems, work was conducted to explore an innovative rotor designed to reduce weight and cost over conventional rotor systems. Trade-off studies were conducted to measure the influence of number of blades, stiffness, and manufacturing method on COE. The study showed that increasing number of blades at constant solidity significantly reduced rotor weight and that manufacturing the blades using pultrusion technology produced the lowest cost per pound. Under contracts with the National Renewable Energy Laboratory and the California Energy Commission, a 400 kW (33m diameter) turbine was designed employing this technology. The project included tests of an 80 kW (15.5m diameter) dynamically scaled rotor which demonstrated the viability of the design.

  11. Calculating Quenching Weights

    CERN Document Server

    Salgado, C A; Salgado, Carlos A.; Wiedemann, Urs Achim

    2003-01-01

    We calculate the probability (``quenching weight'') that a hard parton radiates an additional energy fraction due to scattering in spatially extended QCD matter. This study is based on an exact treatment of finite in-medium path length, it includes the case of a dynamically expanding medium, and it extends to the angular dependence of the medium-induced gluon radiation pattern. All calculations are done in the multiple soft scattering approximation (Baier-Dokshitzer-Mueller-Peign\\'e-Schiff--Zakharov ``BDMPS-Z''-formalism) and in the single hard scattering approximation (N=1 opacity approximation). By comparison, we establish a simple relation between transport coefficient, Debye screening mass and opacity, for which both approximations lead to comparable results. Together with this paper, a CPU-inexpensive numerical subroutine for calculating quenching weights is provided electronically. To illustrate its applications, we discuss the suppression of hadronic transverse momentum spectra in nucleus-nucleus colli...

  12. Normal Weight Dyslipidemia

    DEFF Research Database (Denmark)

    Ipsen, David Hojland; Tveden-Nyborg, Pernille; Lykkesfeldt, Jens

    2016-01-01

    Objective: The liver coordinates lipid metabolism and may play a vital role in the development of dyslipidemia, even in the absence of obesity. Normal weight dyslipidemia (NWD) and patients with nonalcoholic fatty liver disease (NAFLD) who do not have obesity constitute a unique subset...... of individuals characterized by dyslipidemia and metabolic deterioration. This review examined the available literature on the role of the liver in dyslipidemia and the metabolic characteristics of patients with NAFLD who do not have obesity. Methods: PubMed was searched using the following keywords: nonobese......, dyslipidemia, NAFLD, NWD, liver, and metabolically obese/unhealthy normal weight. Additionally, article bibliographies were screened, and relevant citations were retrieved. Studies were excluded if they had not measured relevant biomarkers of dyslipidemia. Results: NWD and NAFLD without obesity share a similar...

  13. Link prediction in weighted networks

    DEFF Research Database (Denmark)

    Wind, David Kofoed; Mørup, Morten

    2012-01-01

    Many complex networks feature relations with weight information. Some models utilize this information while other ignore the weight information when inferring the structure. In this paper we investigate if edge-weights when modeling real networks, carry important information about the network...... is to infer presence of edges, but that simpler models are better at inferring the actual weights....

  14. Marijuana and Body Weight

    OpenAIRE

    Sansone, Randy A.; Sansone, Lori A.

    2014-01-01

    Acute marijuana use is classically associated with snacking behavior (colloquially referred to as “the munchies”). In support of these acute appetite-enhancing effects, several authorities report that marijuana may increase body mass index in patients suffering from human immunodeficiency virus and cancer. However, for these medical conditions, while appetite may be stimulated, some studies indicate that weight gain is not always clinically meaningful. In addition, in a study of cancer patien...

  15. Light Weight Deflectometer (LWD)

    OpenAIRE

    Siddiki, Nayyar Zia

    2012-01-01

    Light weight deflectometer (LWD) has been widely used for quality assurance in road construction, in particular compaction of both chemically treated subgrade soil and aggregate subbase. However, it has been recognized that LWD measurements vary with many factors. Based on LWD tests in actual road construction, this presentation provides updated information on the LWD deflection measurements for both chemically treated subgrade soil and aggregate subbase.

  16. Weighted halfspace depth

    Czech Academy of Sciences Publication Activity Database

    Kotík, Lukáš; Hlubinka, D.; Vencálek, O.

    Vol. 46, č. 1 (2010), s. 125-148 ISSN 0023-5954 Institutional research plan: CEZ:AV0Z10750506 Keywords : data depth * nonparametric multivariate analysis * strong consistency of depth * mixture of distributions Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.461, year: 2010 http://library.utia.cas.cz/separaty/2010/SI/kotik-weighted halfspace depth.pdf

  17. The weight of color

    OpenAIRE

    Brunberg, Mikael

    2013-01-01

    This paper explores the weight of color, with the focus lying on the symbolic significance ofcolor. Exploring whether color in itself conveys symbolic significance and is the symbolicsignificance of color permanent, or is it an after construction? It will be looking at differentareas such as what makes us humans able to perceive colors in the first place, beginning withan insight at some of the foundations in the area of color theory. Mentioning experiments ondecomposed white light, that cont...

  18. Online weight training.

    Science.gov (United States)

    McNamara, John M; Swalm, Ricky L; Stearne, David J; Covassin, Tracey M

    2008-07-01

    The purpose of this study was to determine how a traditional weight training class compared to nontraditional classes that were heavily laden with technology. Could students learn resistance exercises by watching video demonstrations over the Internet? Three university weight training classes, each lasting 16 weeks, were compared. Each class had the same curriculum and workout requirements but different attendance requirements. The online group made extensive use of the Internet and was allowed to complete the workouts on their own at any gym that was convenient for them. Seventy-nine college-aged students were randomized into 3 groups: traditional (n = 27), hybrid (n = 25), and online (n = 27). They completed pretest and posttest measures on upper-body strength (i.e., bench press), lower-body strength (i.e., back squat), and knowledge (i.e., written exam). The results indicated that all 3 groups showed significant improvement in knowledge (p students to attend class and may have resulted in significantly lower scores on the bench press (p technology can be used in a weight training class. If this limit is exceeded, some type of monitoring system appears necessary to ensure that students are actually completing their workouts.

  19. Vehicle Maximum Weight Limitation Based on Intelligent Weight Sensor

    Science.gov (United States)

    Raihan, W.; Tessar, R. M.; Ernest, C. O. S.; E Byan, W. R.; Winda, A.

    2017-03-01

    Vehicle weight is an important factor to be maintained for transportation safety. A weight limitation system is proposed to make sure the vehicle weight is always below its designation prior the vehicle is being used by the driver. The proposed system is divided into two systems, namely vehicle weight confirmation system and weight warning system. In vehicle weight confirmation system, the weight sensor work for the first time after the ignition switch is turned on. When the weight is under the weight limit, the starter engine can be switched on to start the engine system, otherwise it will be locked. The seconds system, will operated after checking all the door at close position, once the door of the car is closed, the weight warning system will check once again the weight during runing engine condition. The results of these two systems, vehicle weight confirmation system and weight warning system have 100 % accuracy, respectively. These show that the proposed vehicle weight limitation system operate well.

  20. On Weighted Support Vector Regression

    DEFF Research Database (Denmark)

    Han, Xixuan; Clemmensen, Line Katrine Harder

    2014-01-01

    We propose a new type of weighted support vector regression (SVR), motivated by modeling local dependencies in time and space in prediction of house prices. The classic weights of the weighted SVR are added to the slack variables in the objective function (OF‐weights). This procedure directly...... shrinks the coefficient of each observation in the estimated functions; thus, it is widely used for minimizing influence of outliers. We propose to additionally add weights to the slack variables in the constraints (CF‐weights) and call the combination of weights the doubly weighted SVR. We illustrate...... the differences and similarities of the two types of weights by demonstrating the connection between the Least Absolute Shrinkage and Selection Operator (LASSO) and the SVR. We show that an SVR problem can be transformed to a LASSO problem plus a linear constraint and a box constraint. We demonstrate...

  1. Marital status and body weight, weight perception, and weight management among U.S. adults.

    Science.gov (United States)

    Klos, Lori A; Sobal, Jeffery

    2013-12-01

    Married individuals often have higher body weights than unmarried individuals, but it is unclear how marital roles affect body weight-related perceptions, desires, and behaviors. This study analyzed cross-sectional data for 4,089 adult men and 3,989 adult women using multinomial logistic regression to examine associations between marital status, perceived body weight, desired body weight, and weight management approach. Controlling for demographics and current weight, married or cohabiting women and divorced or separated women more often perceived themselves as overweight and desired to weigh less than women who had never married. Marital status was unrelated to men's weight perception and desired weight change. Marital status was also generally unrelated to weight management approach, except that divorced or separated women were more likely to have intentionally lost weight within the past year compared to never married women. Additionally, never married men were more likely to be attempting to prevent weight gain than married or cohabiting men and widowed men. Overall, married and formerly married women more often perceived themselves as overweight and desired a lower weight. Men's marital status was generally unassociated with weight-related perceptions, desires, and behaviors. Women's but not men's marital roles appear to influence their perceived and desired weight, suggesting that weight management interventions should be sensitive to both marital status and gender differences. © 2013 Elsevier Ltd. All rights reserved.

  2. All rights reserved Variation in Body Weight, Organ Weight and ...

    African Journals Online (AJOL)

    ADOWIE PERE

    Variation in Body Weight, Organ Weight and Haematological Parameters of Rats Fed ... ABSTRACT: Food insecurity is a major problem of the developing nations. ... Except for the values of haemoglobin and packed cell volume that were ...

  3. Birth weight recovery among very low birth weight infants surviving ...

    African Journals Online (AJOL)

    Very low birth weight (VLBW) infants are those born weighing less ... an association between retinopathy of prematurity and poor weight gain. .... LGA = large for gestational age; SGA = small for gestational age; NEC = necrotising enterocolitis;.

  4. [Motivation for weight loss among weight loss treatment participants].

    Science.gov (United States)

    Czeglédi, Edit

    2017-12-01

    Unrealistic expectations about weight goal and about weight loss-related benefits can hinder the effort for a successful long-term weight control. To explore weight loss-related goals and their background among overweight/obese patients. Study sample consisted of patients who participated in the inpatient weight loss treatment in the Lipidological Department of Szent Imre Hospital (n = 339, 19% men). Mean age: 50.2 years (SD = 13.47 years), mean BMI: 38.6 (SD = 7.58). self-reported anthropometric data, type and number of treated illnesses, Goals and Relative Weights Questionnaire, Motivations for Weight Loss Scale, Body Shape Questionnaire. Participants would feel disappointed with a possible 10% weight loss in a half-year time span. The acceptable weight loss percentage was higher among women, younger participants and among those who had more excess weight. Motivation regarding the increase in social desirability by weight loss is in association with body dissatisfaction, health related motivation is in association with the number of treated illnesses. Our results are contributing to the understanding of motivational factors behind weight reduction efforts, considering these can improve treatment success rates. Orv Hetil. 2017; 158(49): 1960-1967.

  5. Prevalence of metabolic syndrome using weight and weight indices ...

    African Journals Online (AJOL)

    Background: Notions about the metabolic syndrome (MS) emphasized the importance of obesity. This may prevent the early diagnosis of the condition in normal weight individuals. Aim: To determine variations in prevalence of MS according to different weight and weight indices. Materials and Methods: 342 apparently ...

  6. Weight suppression predicts total weight gain and rate of weight gain in outpatients with anorexia nervosa.

    Science.gov (United States)

    Carter, Frances A; Boden, Joseph M; Jordan, Jennifer; McIntosh, Virginia V W; Bulik, Cynthia M; Joyce, Peter R

    2015-11-01

    The present study sought to replicate the finding of Wildes and Marcus, Behav Res Ther, 50, 266-274, 2012 that higher levels of weight suppression at pretreatment predict greater total weight gain, faster rate of weight gain, and bulimic symptoms amongst patients admitted with anorexia nervosa. Participants were 56 women with anorexia nervosa diagnosed by using strict or lenient weight criteria, who were participating in a randomized controlled psychotherapy trial (McIntosh et al., Am J Psychiatry, 162, 741-747, 2005). Thirty-five women completed outpatient treatment and post-treatment assessment. Weight suppression was the discrepancy between highest lifetime weight at adult height and weight at pretreatment assessment. Outcome variables were total weight gain, rate of weight gain, and bulimic symptoms in the month prior to post-treatment assessment [assessed using the Eating Disorders Examination (Fairburn et al., Binge-Eating: Nature, Assessment and Treatment. New York: Guilford, 1993)]. Weight suppression was positively associated with total weight gain and rate of weight gain over treatment. Regression models showed that this association could not be explained by covariates (age at onset of anorexia nervosa and treatment modality). Weight suppression was not significantly associated with bulimic symptoms in the month prior to post-treatment assessment, regardless of whether bulimic symptoms were examined as continuous or dichotomous variables. The present study reinforces the previous finding that weight suppression predicts total weight gain and rate of weight gain amongst patients being treated for anorexia nervosa. Methodological issues may explain the failure of the present study to find that weight suppression predicts bulimic symptoms. Weight suppression at pretreatment for anorexia nervosa should be assessed routinely and may inform treatment planning. © 2015 Wiley Periodicals, Inc.

  7. Improving biogas production from anaerobic co-digestion of Thickened Waste Activated Sludge (TWAS) and fat, oil and grease (FOG) using a dual-stage hyper-thermophilic/thermophilic semi-continuous reactor.

    Science.gov (United States)

    Alqaralleh, Rania Mona; Kennedy, Kevin; Delatolla, Robert

    2018-07-01

    This paper investigates the feasibility and advantages of using a dual-stage hyper-thermophilic/thermophilic semi-continuous reactor system for the co-digestion of Thickened Waste Activated Sludge (TWAS) and Fat, Oil and Grease (FOG) to produce biogas in high quantity and quality. The performance of the dual-stage hyper-thermophilic (70°C)/thermophilic (55°C) anaerobic co-digestion system is evaluated and compared to the performance of a single-stage thermophilic (55°C) reactor that was used to co-digest the same FOG-TWAS mixtures. Both co-digestion reactors were compared to a control reactor (the control reactor was a single-stage thermophilic reactor that only digested TWAS). The effect of FOG% in the co-digestion mixture (based on total volatile solids) and the reactor hydraulic retention time (HRT) on the biogas/methane production and the reactors' performance were thoroughly investigated. The FOG% that led to the maximum methane yield with a stable reactor performance was determined for both reactors. The maximum FOG% obtained for the single-stage thermophilic reactor at 15 days HRT was found to be 65%. This 65% FOG resulted in 88.3% higher methane yield compared to the control reactor. However, the dual-stage hyper-thermophilic/thermophilic co-digestion reactor proved to be more efficient than the single-stage thermophilic co-digestion reactor, as it was able to digest up to 70% FOG with a stable reactor performance. The 70% FOG in the co-digestion mixture resulted in 148.2% higher methane yield compared to the control at 15 days HRT. 70% FOG (based on total volatile solids) is so far the highest FOG% that has been proved to be useful and safe for semi-continuous reactor application in the open literature. Finally, the dual-stage hyper-thermophilic/thermophilic co-digestion reactor also proved to be efficient and stable in co-digesting 40% FOG mixtures at lower HRTs (i.e., 9 and 12 days) and still produce high methane yields and Class A effluents

  8. Stabilizing weighted complex networks

    International Nuclear Information System (INIS)

    Xiang Linying; Chen Zengqiang; Liu Zhongxin; Chen Fei; Yuan Zhuzhi

    2007-01-01

    Real networks often consist of local units which interact with each other via asymmetric and heterogeneous connections. In this paper, the V-stability problem is investigated for a class of asymmetric weighted coupled networks with nonidentical node dynamics, which includes the unweighted network as a special case. Pinning control is suggested to stabilize such a coupled network. The complicated stabilization problem is reduced to measuring the semi-negative property of the characteristic matrix which embodies not only the network topology, but also the node self-dynamics and the control gains. It is found that network stabilizability depends critically on the second largest eigenvalue of the characteristic matrix. The smaller the second largest eigenvalue is, the more the network is pinning controllable. Numerical simulations of two representative networks composed of non-chaotic systems and chaotic systems, respectively, are shown for illustration and verification

  9. Weighted Lomax distribution.

    Science.gov (United States)

    Kilany, N M

    2016-01-01

    The Lomax distribution (Pareto Type-II) is widely applicable in reliability and life testing problems in engineering as well as in survival analysis as an alternative distribution. In this paper, Weighted Lomax distribution is proposed and studied. The density function and its behavior, moments, hazard and survival functions, mean residual life and reversed failure rate, extreme values distributions and order statistics are derived and studied. The parameters of this distribution are estimated by the method of moments and the maximum likelihood estimation method and the observed information matrix is derived. Moreover, simulation schemes are derived. Finally, an application of the model to a real data set is presented and compared with some other well-known distributions.

  10. Weight simulation fuel assembly

    International Nuclear Information System (INIS)

    Sumikawa, Kiyokazu; Tokomatsu, Mutsuo.

    1993-01-01

    A tungsten pellet is not applied with hollow fabrication but a tungsten rod is inserted and filled into a zircaloy fuel cladding tube, as well as different kind of material having a density lower than that of tungsten, for example, stainless steel rods, are disposed successively intermittently and alternately for simulating the weight of one fuel rod. The filling method and the length of the individual pellets are optional depending on the method of usage, providing that the outer diameter of the simulation pellet is made identical with that of the actual fuel pellet. With such a constitution, there is no need to dispose a hollow portion as in the case of using only tungsten pellets, and the costs for both the materials and the fabrication can be saved. (T.M.)

  11. Weight Changes in General Practice

    DEFF Research Database (Denmark)

    Køster-Rasmussen, Rasmus

    2015-01-01

    INTRODUCTION: This PhD thesis is about weight changes. What determines long-term weight changes in the adult general population? Is it possible that weight loss may not always be healthy? The present clinical guidelines for general practice advice most overweight persons and patients with type 2 ...... lifestyle changes like for instance Mediterranean diet and increased exercise....

  12. Hypnotherapy in Weight Loss Treatment.

    Science.gov (United States)

    Cochrane, Gordon; Friesen, John

    1986-01-01

    Investigated effects of hypnosis as a treatment for weight loss among women. The primary hypothesis that hypnosis is an effective treatment for weight loss was confirmed, but seven concomitant variables and the use of audiotapes were not significant contributors to weight loss. (Author/ABB)

  13. On weighted dyadic Carleson's inequalities

    Directory of Open Access Journals (Sweden)

    Tachizawa K

    2001-01-01

    Full Text Available We give an alternate proof of weighted dyadic Carleson's inequalities which are essentially proved by Sawyer and Wheeden. We use the Bellman function approach of Nazarov and Treil. As an application we give an alternate proof of weighted inequalities for dyadic fractional maximal operators. A result on weighted inequalities for fractional integral operators is given.

  14. Weight Training for Wheelchair Sports.

    Science.gov (United States)

    Practical Pointers, 1978

    1978-01-01

    The article examines weight lifting training procedures for persons involved in wheelchair sports. Popular myths about weight training are countered, and guidelines for a safe and sound weight or resistance training program are given. Diagrams and descriptions follow for specific weightlifting activities: regular or standing press, military press,…

  15. The Impact of Feeding Diets of High or Low Energy Concentration on Carcass Measurements and the Weight of Primal and Subprimal Lean Cuts

    Directory of Open Access Journals (Sweden)

    A. P. Schinckel

    2012-04-01

    Full Text Available Pigs from four sire lines were allocated to a series of low energy (LE, 3.15 to 3.21 Mcal ME/kg corn-soybean meal-based diets with 16% wheat midds or high energy diets (HE, 3.41 to 3.45 Mcal ME/kg with 4.5 to 4.95% choice white grease. All diets contained 6% DDGS. The HE and LE diets of each of the four phases were formulated to have equal lysine:Mcal ME ratios. Barrows (N = 2,178 and gilts (N = 2,274 were fed either high energy (HE or low energy (LE diets from 27 kg BW to target BWs of 118, 127, 131.5 and 140.6 kg. Carcass primal and subprimal cut weights were collected. The cut weights and carcass measurements were fitted to allometric functions (Y = A CWB of carcass weight. The significance of diet, sex or sire line with A and B was evaluated by linearizing the equations by log to log transformation. The effect of diet on A and B did not interact with sex or sire line. Thus, the final model was B where Diet = −0.5 for the LE and 0.5 for HE diets and A and B are sire line-sex specific parameters. cut weight = (1+bD(Diet A(CW Diet had no affect on loin, Boston butt, picnic, baby back rib, or sparerib weights (p>0.10, bD = −0.003, −0.0029, 0.0002, 0.0047, −0.0025, respectively. Diet affected ham weight (bD = −0.0046, p = 0.01, belly weight (bD = 0.0188, p = 0.001 three-muscle ham weight (bD = −0.014, p = 0.001, boneless loin weight (bD = −0.010, p = 0.001, tenderloin weight (bD = −0.023, p = 0.001, sirloin weight (bD = −0.009, p = 0.034, and fat-free lean mass (bD = −0.0145, p = 0.001. Overall, feeding the LE diets had little impact on primal cut weight except to decrease belly weight. Feeding LE diets increased the weight of lean trimmed cuts by 1 to 2 percent at the same carcass weight.

  16. Greasing the palm: can collectivism promote bribery?

    Science.gov (United States)

    Mazar, Nina; Aggarwal, Pankaj

    2011-07-01

    Why are there national differences in the propensity to bribe? To investigate this question, we conducted a correlational study with cross-national data and a laboratory experiment. We found a significant effect of the degree of collectivism versus individualism present in a national culture on the propensity to offer bribes to international business partners. Furthermore, the effect was mediated by individuals' sense of responsibility for their actions. Together, these results suggest that collectivism promotes bribery through lower perceived responsibility for one's actions.

  17. Holiday Weight Management by Successful Weight Losers and Normal Weight Individuals

    Science.gov (United States)

    Phelan, Suzanne; Wing, Rena R.; Raynor, Hollie A.; Dibello, Julia; Nedeau, Kim; Peng, Wanfeng

    2008-01-01

    This study compared weight control strategies during the winter holidays among successful weight losers (SWL) in the National Weight Control Registry and normal weight individuals (NW) with no history of obesity. SWL (n = 178) had lost a mean of 34.9 kg and had kept greater than or equal to 13.6 kg off for a mean of 5.9 years. NW (n = 101) had a…

  18. Weight Rhythms: Weight Increases during Weekends and Decreases during Weekdays

    Directory of Open Access Journals (Sweden)

    Anna-Leena Orsama

    2014-01-01

    Full Text Available Background/Aims: The week's cycle influences sleep, exercise, and eating habits. An accurate description of weekly weight rhythms has not been reported yet - especially across people who lose weight versus those who maintain or gain weight. Methods: The daily weight in 80 adults (BMI 20.0-33.5 kg/m2; age, 25-62 years was recorded and analysed to determine if a group-level weekly weight fluctuation exists. This was a retrospective study of 4,657 measurements during 15-330 monitoring days. Semi-parametric regression was used to model the rhythm. Results: A pattern of daily weight changes was found (p Conclusion: Weight variations between weekends and weekdays should be considered as normal instead of signs of weight gain. Those who compensate the most are most likely to either lose or maintain weight over time. Long-term habits may make more of a difference than short-term splurges. People prone to weight gain could be counselled about the importance of weekday compensation.

  19. Some observations on weighted GMRES

    KAUST Repository

    Güttel, Stefan

    2014-01-10

    We investigate the convergence of the weighted GMRES method for solving linear systems. Two different weighting variants are compared with unweighted GMRES for three model problems, giving a phenomenological explanation of cases where weighting improves convergence, and a case where weighting has no effect on the convergence. We also present a new alternative implementation of the weighted Arnoldi algorithm which under known circumstances will be favourable in terms of computational complexity. These implementations of weighted GMRES are compared for a large number of examples. We find that weighted GMRES may outperform unweighted GMRES for some problems, but more often this method is not competitive with other Krylov subspace methods like GMRES with deflated restarting or BICGSTAB, in particular when a preconditioner is used. © 2014 Springer Science+Business Media New York.

  20. Some observations on weighted GMRES

    KAUST Repository

    Gü ttel, Stefan; Pestana, Jennifer

    2014-01-01

    We investigate the convergence of the weighted GMRES method for solving linear systems. Two different weighting variants are compared with unweighted GMRES for three model problems, giving a phenomenological explanation of cases where weighting improves convergence, and a case where weighting has no effect on the convergence. We also present a new alternative implementation of the weighted Arnoldi algorithm which under known circumstances will be favourable in terms of computational complexity. These implementations of weighted GMRES are compared for a large number of examples. We find that weighted GMRES may outperform unweighted GMRES for some problems, but more often this method is not competitive with other Krylov subspace methods like GMRES with deflated restarting or BICGSTAB, in particular when a preconditioner is used. © 2014 Springer Science+Business Media New York.

  1. Heterotic weight lifting

    Energy Technology Data Exchange (ETDEWEB)

    Gato-Rivera, B. [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands); Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain); Schellekens, A.N., E-mail: t58@nikhef.n [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands); Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain); IMAPP, Radboud Universiteit, Nijmegen (Netherlands)

    2010-03-21

    We describe a method for constructing genuinely asymmetric (2,0) heterotic strings out of N=2 minimal models in the fermionic sector, whereas the bosonic sector is only partly build out of N=2 minimal models. This is achieved by replacing one minimal model plus the superfluous E{sub 8} factor by a non-supersymmetric CFT with identical modular properties. This CFT generically lifts the weights in the bosonic sector, giving rise to a spectrum with fewer massless states. We identify more than 30 such lifts, and we expect many more to exist. This yields more than 450 different combinations. Remarkably, despite the lifting of all Ramond states, it is still possible to get chiral spectra. Even more surprisingly, these chiral spectra include examples with a certain number of chiral families of SO(10), SU(5) or other subgroups, including just SU(3)xSU(2)xU(1). The number of families and mirror families is typically smaller than in standard Gepner models. Furthermore, in a large number of different cases, spectra with three chiral families can be obtained. Based on a first scan of about 10% of the lifted Gepner models we can construct, we have collected more than 10,000 distinct spectra with three families, including examples without mirror fermions. We present an example where the GUT group is completely broken to the standard model, but the resulting and inevitable fractionally charged particles are confined by an additional gauge group factor.

  2. Heterotic weight lifting

    International Nuclear Information System (INIS)

    Gato-Rivera, B.; Schellekens, A.N.

    2010-01-01

    We describe a method for constructing genuinely asymmetric (2,0) heterotic strings out of N=2 minimal models in the fermionic sector, whereas the bosonic sector is only partly build out of N=2 minimal models. This is achieved by replacing one minimal model plus the superfluous E 8 factor by a non-supersymmetric CFT with identical modular properties. This CFT generically lifts the weights in the bosonic sector, giving rise to a spectrum with fewer massless states. We identify more than 30 such lifts, and we expect many more to exist. This yields more than 450 different combinations. Remarkably, despite the lifting of all Ramond states, it is still possible to get chiral spectra. Even more surprisingly, these chiral spectra include examples with a certain number of chiral families of SO(10), SU(5) or other subgroups, including just SU(3)xSU(2)xU(1). The number of families and mirror families is typically smaller than in standard Gepner models. Furthermore, in a large number of different cases, spectra with three chiral families can be obtained. Based on a first scan of about 10% of the lifted Gepner models we can construct, we have collected more than 10,000 distinct spectra with three families, including examples without mirror fermions. We present an example where the GUT group is completely broken to the standard model, but the resulting and inevitable fractionally charged particles are confined by an additional gauge group factor.

  3. Association between maternal weight gain and birth weight

    DEFF Research Database (Denmark)

    Rode, Line; Hegaard, Hanne K; Kjaergaard, Hanne

    2007-01-01

    To investigate the association between maternal weight gain and birth weight less than 3,000 g and greater than or equal to 4,000 g in underweight (body mass index [BMI] less than 19.8 kg/m(2)), normal weight (BMI 19.8-26.0 kg/m(2)), overweight (BMI 26.1-29.0 kg/m(2)), and obese (BMI greater than...

  4. Gestational weight gain among minority adolescents predicts term birth weight.

    Science.gov (United States)

    Ekambaram, Maheswari; Irigoyen, Matilde; DeFreitas, Johelin; Rajbhandari, Sharina; Geaney, Jessica Lynn; Braitman, Leonard Edward

    2018-03-07

    In adolescents, there is limited evidence on the independent and additive effect of prepregnancy body mass index (BMI) and gestational weight gain on infant birth weight. Data also show that this effect may vary by race. We sought to examine the impact of maternal prepregnancy BMI and gestational weight gain on birth weight and risk of large for gestational age (LGA) in term newborns of minority adolescent mothers. This was a retrospective cohort study of 411 singleton live term infants born to mothers ≤ 18 years. Data were abstracted from electronic medical records. Gestational weight gain was related to infant birth weight (ρ = 0.36, P gain, gestational age and Hispanic ethnicity were independent predictors of birth weight, controlling for maternal age, BMI, parity, tobacco/drug use and preeclampsia. The probability of having an LGA infant increased with weight gain [adjusted odds ratio (aOR) 1.14, 95% confidence interval (CI) 1.07-1.21] but not with BMI. Mothers who gained weight in excess of 2009 Institute of Medicine (IOM) recommendations had a greater risk of having an LGA infant compared to those who gained within recommendations (aOR 5.7, 95% CI 1.6-19.5). Minority adolescents with greater gestational weight gain had infants with higher birth weight and greater risk of LGA; BMI was not associated with either outcome. Further studies are needed to examine the applicability of the 2009 BMI-specific IOM gestational weight gain recommendations to adolescents in minority populations.

  5. Handling Dynamic Weights in Weighted Frequent Pattern Mining

    Science.gov (United States)

    Ahmed, Chowdhury Farhan; Tanbeer, Syed Khairuzzaman; Jeong, Byeong-Soo; Lee, Young-Koo

    Even though weighted frequent pattern (WFP) mining is more effective than traditional frequent pattern mining because it can consider different semantic significances (weights) of items, existing WFP algorithms assume that each item has a fixed weight. But in real world scenarios, the weight (price or significance) of an item can vary with time. Reflecting these changes in item weight is necessary in several mining applications, such as retail market data analysis and web click stream analysis. In this paper, we introduce the concept of a dynamic weight for each item, and propose an algorithm, DWFPM (dynamic weighted frequent pattern mining), that makes use of this concept. Our algorithm can address situations where the weight (price or significance) of an item varies dynamically. It exploits a pattern growth mining technique to avoid the level-wise candidate set generation-and-test methodology. Furthermore, it requires only one database scan, so it is eligible for use in stream data mining. An extensive performance analysis shows that our algorithm is efficient and scalable for WFP mining using dynamic weights.

  6. Effect of sibutramine on weight maintenance after weight loss

    DEFF Research Database (Denmark)

    James, W P; Astrup, A; Finer, Nicholas

    2000-01-01

    Sibutramine is a tertiary amine that has been shown to induce dose-dependent weight loss and to enhance the effects of a low-calorie diet for up to a year. We did a randomised, double-blind trial to assess the usefulness of sibutramine in maintaining substantial weight loss over 2 years.......Sibutramine is a tertiary amine that has been shown to induce dose-dependent weight loss and to enhance the effects of a low-calorie diet for up to a year. We did a randomised, double-blind trial to assess the usefulness of sibutramine in maintaining substantial weight loss over 2 years....

  7. Weight Maintenance: Determinants of Success

    National Research Council Canada - National Science Library

    Mitchell, Cynthia L

    2005-01-01

    .... Obesity and physical inactivity are major preventable health problems in the United States, but despite overwhelming evidence regarding the benefits of a healthy weight and regular physical activity...

  8. Variation in Body Weight, Organ Weight and Haematological ...

    African Journals Online (AJOL)

    The rats fed raw kudzu and negative control diet showed negative mean weight changes(- 6.50g and -10.0g )while those fed with positive control and treated kudzu diet showed positive mean weight ... The result showed that the treated flour supported growth but had no definite effect on other parameters measured.

  9. Length-weight relationships, condition factors and relative weight of ...

    African Journals Online (AJOL)

    The aim of this study was to record the length-weight relationship parameters and condition factors for some commercially important fish of Bushehr coastal waters of Persian Gulf. The length-weight relationships were calculated for five species caught during fishing surveys using different types of fishing gears (trawls, pots ...

  10. Weighted Branching Simulation Distance for Parametric Weighted Kripke Structures

    DEFF Research Database (Denmark)

    Foshammer, Louise; Larsen, Kim Guldstrand; Mariegaard, Anders

    2016-01-01

    This paper concerns branching simulation for weighted Kripke structures with parametric weights. Concretely, we consider a weighted extension of branching simulation where a single transitions can be matched by a sequence of transitions while preserving the branching behavior. We relax this notion...... to allow for a small degree of deviation in the matching of weights, inducing a directed distance on states. The distance between two states can be used directly to relate properties of the states within a sub-fragment of weighted CTL. The problem of relating systems thus changes to minimizing the distance...... which, in the general parametric case, corresponds to finding suitable parameter valuations such that one system can approximately simulate another. Although the distance considers a potentially infinite set of transition sequences we demonstrate that there exists an upper bound on the length...

  11. Proportioning of light weight concrete

    DEFF Research Database (Denmark)

    Palmus, Lars

    1996-01-01

    Development of a method to determine the proportions of the raw materials in light weight concrete made with leight expanded clay aggregate. The method is based on composite theory......Development of a method to determine the proportions of the raw materials in light weight concrete made with leight expanded clay aggregate. The method is based on composite theory...

  12. Paranormal weighted conditional type operators

    OpenAIRE

    Estaremi, Yousef

    2014-01-01

    In this paper, some sub-classes of paranormal weighted conditional expectation type operators, such as *-paranormal, quasi-*-paranormal and (n; k)-quasi-*-paranormal weighted conditional expectation type opera- tors on $L^2(\\Sigma)$ are investigated. Also, some applications about the spectrum, point spectrum, joint point spectrum, approximate point spectrum and joint approximate point spectrum of these classes are presented.

  13. Aim For a Healthy Weight

    Science.gov (United States)

    ... out of your control, you can make positive lifestyle changes to lose weight and to maintain a healthy weight. These include a healthy eating plan and being more physically active. Take the Challenge When it comes to aiming for a healthy ...

  14. Weight-Control Information Network

    Science.gov (United States)

    ... Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition Blood Diseases Diagnostic Tests La información ... Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition Blood Diseases Diagnostic Tests La información ...

  15. Fungible weights in logistic regression.

    Science.gov (United States)

    Jones, Jeff A; Waller, Niels G

    2016-06-01

    In this article we develop methods for assessing parameter sensitivity in logistic regression models. To set the stage for this work, we first review Waller's (2008) equations for computing fungible weights in linear regression. Next, we describe 2 methods for computing fungible weights in logistic regression. To demonstrate the utility of these methods, we compute fungible logistic regression weights using data from the Centers for Disease Control and Prevention's (2010) Youth Risk Behavior Surveillance Survey, and we illustrate how these alternate weights can be used to evaluate parameter sensitivity. To make our work accessible to the research community, we provide R code (R Core Team, 2015) that will generate both kinds of fungible logistic regression weights. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  16. Perceived weight discrimination and obesity.

    Directory of Open Access Journals (Sweden)

    Angelina R Sutin

    Full Text Available Weight discrimination is prevalent in American society. Although associated consistently with psychological and economic outcomes, less is known about whether weight discrimination is associated with longitudinal changes in obesity. The objectives of this research are (1 to test whether weight discrimination is associated with risk of becoming obese (Body Mass Index≥30; BMI by follow-up among those not obese at baseline, and (2 to test whether weight discrimination is associated with risk of remaining obese at follow-up among those already obese at baseline. Participants were drawn from the Health and Retirement Study, a nationally representative longitudinal survey of community-dwelling US residents. A total of 6,157 participants (58.6% female completed the discrimination measure and had weight and height available from the 2006 and 2010 assessments. Participants who experienced weight discrimination were approximately 2.5 times more likely to become obese by follow-up (OR = 2.54, 95% CI = 1.58-4.08 and participants who were obese at baseline were three times more likely to remain obese at follow up (OR = 3.20, 95% CI = 2.06-4.97 than those who had not experienced such discrimination. These effects held when controlling for demographic factors (age, sex, ethnicity, education and when baseline BMI was included as a covariate. These effects were also specific to weight discrimination; other forms of discrimination (e.g., sex, race were unrelated to risk of obesity at follow-up. The present research demonstrates that, in addition to poorer mental health outcomes, weight discrimination has implications for obesity. Rather than motivating individuals to lose weight, weight discrimination increases risk for obesity.

  17. Association between maternal weight gain and birth weight

    DEFF Research Database (Denmark)

    Rode, Line; Hegaard, Hanne K; Kjaergaard, Hanne

    2007-01-01

    To investigate the association between maternal weight gain and birth weight less than 3,000 g and greater than or equal to 4,000 g in underweight (body mass index [BMI] less than 19.8 kg/m(2)), normal weight (BMI 19.8-26.0 kg/m(2)), overweight (BMI 26.1-29.0 kg/m(2)), and obese (BMI greater than...... 29.0 kg/m(2)) women, with emphasis on the use of the American Institute of Medicine (IOM) recommendations in Denmark....

  18. Combination contraceptives: effects on weight.

    Science.gov (United States)

    Gallo, Maria F; Lopez, Laureen M; Grimes, David A; Carayon, Florence; Schulz, Kenneth F; Helmerhorst, Frans M

    2014-01-29

    Weight gain is often considered a side effect of combination hormonal contraceptives, and many women and clinicians believe that an association exists. Concern about weight gain can limit the use of this highly effective method of contraception by deterring the initiation of its use and causing early discontinuation among users. However, a causal relationship between combination contraceptives and weight gain has not been established. The aim of the review was to evaluate the potential association between combination contraceptive use and changes in weight. In November 2013, we searched the computerized databases CENTRAL (The Cochrane Library), MEDLINE, POPLINE, EMBASE, and LILACS for studies of combination contraceptives, as well as ClinicalTrials.gov and International Clinical Trials Registry Platform (ICTRP). For the initial review, we also wrote to known investigators and manufacturers to request information about other published or unpublished trials not discovered in our search. All English-language, randomized controlled trials were eligible if they had at least three treatment cycles and compared a combination contraceptive to a placebo or to a combination contraceptive that differed in drug, dosage, regimen, or study length. All titles and abstracts located in the literature searches were assessed. Data were entered and analyzed with RevMan. A second author verified the data entered. For continuous data, we calculated the mean difference and 95% confidence interval (CI) for the mean change in weight between baseline and post-treatment measurements using a fixed-effect model. For categorical data, such as the proportion of women who gained or lost more than a specified amount of weight, the Peto odds ratio with 95% CI was calculated. We found 49 trials that met our inclusion criteria. The trials included 85 weight change comparisons for 52 distinct contraceptive pairs (or placebos). The four trials with a placebo or no intervention group did not find

  19. Weight Changes in General Practice.

    Science.gov (United States)

    Køster-Rasmussen, Rasmus

    2017-06-01

    This PhD thesis is about weight changes. What determines long-term weight changes in the adult general population? Is it possible that weight loss may not always be healthy? The present clinical guidelines for general practice advice most overweight persons and patients with type 2 diabetes to lose weight. Are the guidelines based on firm evidence?   METHODS: The back-bone of the thesis is constituted by three scientific articles based on three different population based cohort studies. Multivariable modeling and other epidemiological methods were used.   RESULTS: Article 1 examined weight changes in the general population in relation to smoking status, and proposed a graphical 'smoking cessation weight change model', demonstrating the importance of time, age and smoking status in relation to long-term weight changes. Article 2 suggested new methods to improve the processing of dietary data. It was demonstrated how median imputation for missing values and assumptions about standard portion sizes were inferior to stochastic methods conditioning on information about physiology of the individual. Article 3 evaluated the influence of prospectively planned intentional weight loss on long-term morbidity and mortality in patients with type 2 diabetes. Therapeutic intentional weight loss supervised by a medical doctor was not associated with reduced morbidity or mortality. In the general population the dietary intake of fructose and soft drinks sweetened with sugar was not associated with weight change over 9 years. Weight gain rates were large in young adults and incrementally smaller in middle aged adults. Subjects more than 60 years lost weight on average. Historical weight data suggest that the body weight increases throughout life to the age of 60-65years. A study with simulated data indicates that bias in baseline BMI may misleadingly have favored weight loss in earlier cohort studies of intentional weight loss and mortality.   DISCUSSION: The findings regarding

  20. Early weight loss predicts weight loss treatment response regardless of binge-eating disorder status and pretreatment weight change.

    Science.gov (United States)

    Barnes, Rachel D; Ivezaj, Valentina; Pittman, Brian P; Grilo, Carlos M

    2018-04-10

    Individuals seeking weight loss treatment have diverse pretreatment weight trajectories, and once enrolled, individuals' response to weight loss treatments also varies greatly and may be influenced by the presence of binge-eating disorder (BED). Reported average weight losses may obscure these considerable differences. This study examined whether BED status and different weight-related change variables are associated with successful weight loss treatment outcomes in a controlled treatment study. Participants (N = 89) with overweight/obesity, with and without BED, participated in a 3-month weight loss trial in primary care with 3- and 12-month follow-ups. We tested the prognostic significance of four weight-related change variables (the last supper, early weight loss, pretreatment weight trajectory, weight suppression) on outcomes (weight loss-overall, weight loss-"subsequent," weight loss during second half of treatment). Early weight loss was positively associated with weight loss-overall at post-treatment, and at 3-month and 12-month follow-up. Early weight loss was positively associated with weight loss-subsequent at post-treatment only. No other weight-related variables were significantly associated with weight loss. Models including BED status and treatment condition were not significant. Participants with early weight loss were more likely to continue losing weight, regardless of BED status or treatment condition. The results highlight the importance of early dedication to weight loss treatment to increase the likelihood of positive outcomes. © 2018 Wiley Periodicals, Inc.

  1. Weight control behaviors of highly successful weight loss maintainers: the Portuguese Weight Control Registry.

    Science.gov (United States)

    Santos, Inês; Vieira, Paulo N; Silva, Marlene N; Sardinha, Luís B; Teixeira, Pedro J

    2017-04-01

    To describe key behaviors reported by participants in the Portuguese Weight Control Registry and to determine associations between these behaviors and weight loss maintenance. A total of 388 adults participated in this cross-sectional study. Assessments included demographic information, weight history, weight loss and weight maintenance strategies, dietary intake, and physical activity. Participants lost on average 18 kg, which they had maintained for ~28 months. Their average dietary intake was 2199 kcal/day, with 33 % of energy coming from fat. About 78 % of participants engaged in levels of moderate-plus-vigorous physical activity exceeding 150 min/week (51 % above 250 min/week), with men accumulating 82 more minutes than women (p breakfast. Greater weight loss maintenance was associated with higher levels of physical activity, walking, weight self-monitoring, establishing specific goals, and with reduced portion size use, reduced consumption of carbohydrates, and increased consumption of protein, (p < 0.05). Results indicate that weight loss maintenance is possible through the adoption of a nutritionally-balanced diet and regular participation in physical activity, but also suggest that adopting different (and, to a degree, individualized) set of behavioral strategies is key for achieving success.

  2. Iterative Selection of Unknown Weights in Direct Weight Optimization Identification

    Directory of Open Access Journals (Sweden)

    Xiao Xuan

    2014-01-01

    Full Text Available To the direct weight optimization identification of the nonlinear system, we add some linear terms about input sequences in the former linear affine function so as to approximate the nonlinear property. To choose the two classes of unknown weights in the more linear terms, this paper derives the detailed process on how to choose these unknown weights from theoretical analysis and engineering practice, respectively, and makes sure of their key roles between the unknown weights. From the theoretical analysis, the added unknown weights’ auxiliary role can be known in the whole process of approximating the nonlinear system. From the practical analysis, we learn how to transform one complex optimization problem to its corresponding common quadratic program problem. Then, the common quadratic program problem can be solved by the basic interior point method. Finally, the efficiency and possibility of the proposed strategies can be confirmed by the simulation results.

  3. Shellfish Feeding Experiments, Filter Weight and Tissue Weight

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Particulate matter removal by shellfish was quantified in several geographic locations, across several years. Data include filter and shellfish tissue weights.

  4. Correlates of Low Birth Weight

    Directory of Open Access Journals (Sweden)

    Ankur Barua MD, PhD

    2014-12-01

    Full Text Available Background. Low birth weight is the single most important factor that determines the chances of child survival. A recent annual estimation indicated that nearly 8 million infants are born with low birth weight in India. The infant mortality rate is about 20 times greater for all low birth weight babies. Methods. A matched case–control study was conducted on 130 low birth weight babies and 130 controls for 12 months (from August 1, 2007, to July 31, 2008 at the Central Referral Hospital, Tadong, East District of Sikkim, India. Data were analyzed using the Statistical Package for Social Sciences, version 10.0 for Windows. Chi-square test and multiple logistic regression were applied. A P value less than .05 was considered as significant. Results. In the first phase of this study, 711 newborn babies, borne by 680 mothers, were screened at the Central Referral Hospital of Sikkim during the 1-year study period, and the proportion of low birth weight babies was determined to be 130 (18.3%. Conclusion. Multiple logistic regression analysis, conducted in the second phase, revealed that low or middle socioeconomic status, maternal underweight, twin pregnancy, previous history of delivery of low birth weight babies, smoking and consumption of alcohol during pregnancy, and congenital anomalies had independent significant association with low birth weight in this study population.

  5. Optimal design of condenser weight

    International Nuclear Information System (INIS)

    Zheng Jing; Yan Changqi; Wang Jianjun

    2011-01-01

    The condenser is an important component in nuclear power plants, which dimension and weight will effect the economical performance and the arrangement of the nuclear power plants. In this paper, the calculation model is established according to the design experience. The corresponding codes are also developed, and the sensitivity of design parameters which influence the condenser weight is analyzed. The present design optimization of the condenser, taking the weight minimization as the objective, is carried out with the self-developed complex-genetic algorithm. The results show that the reference condenser design is far from the best scheme, and also verify the feasibility of the complex-genetic algorithm. (authors)

  6. Bipolar Medications and Weight Gain

    Science.gov (United States)

    ... mood stabilizer. The medication Symbyax combines the antidepressant fluoxetine and the antipsychotic olanzapine and is associated with ... in body weight and psychotropic drugs: A systematic synthesis of the literature. PLOS One. 2012;7:e36889. ...

  7. Efficient Completion of Weighted Automata

    Directory of Open Access Journals (Sweden)

    Johannes Waldmann

    2016-09-01

    Full Text Available We consider directed graphs with edge labels from a semiring. We present an algorithm that allows efficient execution of queries for existence and weights of paths, and allows updates of the graph: adding nodes and edges, and changing weights of existing edges. We apply this method in the construction of matchbound certificates for automatically proving termination of string rewriting. We re-implement the decomposition/completion algorithm of Endrullis et al. (2006 in our framework, and achieve comparable performance.

  8. Temporal trends in pregnancy weight gain and birth weight in Bavaria 2000–2007: slightly decreasing birth weight with increasing weight gain in pregnancy

    OpenAIRE

    Schiessl, Barbara; Beyerlein, Andreas; Lack, Nicholas; Kries, Rüdiger von

    2009-01-01

    Aims: To assess temporal trends in birth weight and pregnancy weight gain in Bavaria from 2000 to 2007. Methods: Data on 695,707 mother and infant pairs (singleton term births) were available from a compulsory reporting system for quality assurance, including information on birth weight, maternal weight at delivery and at booking, maternal smoking, age, and further anthropometric and lifestyle factors. Pregnancy weight gain was defined as: weight prior to delivery minus weight at first booki...

  9. Preventing Excessive Gestational Weight Gain and Postpartum Weight Retention.

    LENUS (Irish Health Repository)

    O’Dwyer, V

    2017-10-01

    regnancy and the postpartum period are unique opportunities to promote healthy lifestyle choices including a healthy diet and regular exercise. This is especially important for those who are overweight or obese. Women are weighed at their first antenatal visit and body mass index (BMI) calculated, but not all hospitals routinely weigh women throughout pregnancy. A qualitative Dublin study examined experiences of routine weighing during antenatal care. This study found that women expected to be weighed during pregnancy and postpartum. The benefits of this included providing reassurance and minimising postpartum weight retention. Furthermore, women were eager to receive more information about healthy lifestyle interventions and gestational weight gain (GWG) from healthcare professionals

  10. (Dis-)solving the Weight Problem in Binge-Eating Disorder: Systemic Insights From Three Treatment Contexts With Weight Stability, Weight Loss, and Weight Acceptance.

    Science.gov (United States)

    Meyer, Lene Bomholt; Waaddegaard, Mette; Lau, Marianne Engelbrecht; Tjørnhøj-Thomsen, Tine

    2018-04-01

    Binge-eating disorder (BED) is a severe eating disorder strongly associated with obesity. Treatments struggle to provide safe and effective ways of addressing weight in a BED context. This study explored a two-phased treatment for BED developed at a major out-patient eating disorder service in Denmark. The study used interviews and participant observations to gain insight into experiences and processes related to weight and body issues in three treatment contexts that addressed weight stability, weight acceptance, and weight loss. Using systems theory, the study proposed a relational weight problem that embeds feelings of non-acceptance due to weight, a merge of weight and identity, and an internalized body- and weight-critical gaze of others. Contrary to critical claims that weight acceptance discourages people with obesity from engaging in weight loss efforts, this study suggests that acceptance and a disentanglement of weight and identity are prerequisites for weight loss for this group.

  11. Weighted Watson-Crick automata

    Energy Technology Data Exchange (ETDEWEB)

    Tamrin, Mohd Izzuddin Mohd [Department of Information System, Kulliyyah of Information and Communication Technology, International Islamic University Malaysia, 50728 Gombak, Selangor (Malaysia); Turaev, Sherzod; Sembok, Tengku Mohd Tengku [Department of Computer Science, Kulliyyah of Information and Communication Technology, International Islamic University Malaysia, 50728 Gombak, Selangor (Malaysia)

    2014-07-10

    There are tremendous works in biotechnology especially in area of DNA molecules. The computer society is attempting to develop smaller computing devices through computational models which are based on the operations performed on the DNA molecules. A Watson-Crick automaton, a theoretical model for DNA based computation, has two reading heads, and works on double-stranded sequences of the input related by a complementarity relation similar with the Watson-Crick complementarity of DNA nucleotides. Over the time, several variants of Watson-Crick automata have been introduced and investigated. However, they cannot be used as suitable DNA based computational models for molecular stochastic processes and fuzzy processes that are related to important practical problems such as molecular parsing, gene disease detection, and food authentication. In this paper we define new variants of Watson-Crick automata, called weighted Watson-Crick automata, developing theoretical models for molecular stochastic and fuzzy processes. We define weighted Watson-Crick automata adapting weight restriction mechanisms associated with formal grammars and automata. We also study the generative capacities of weighted Watson-Crick automata, including probabilistic and fuzzy variants. We show that weighted variants of Watson-Crick automata increase their generative power.

  12. Weighted Watson-Crick automata

    International Nuclear Information System (INIS)

    Tamrin, Mohd Izzuddin Mohd; Turaev, Sherzod; Sembok, Tengku Mohd Tengku

    2014-01-01

    There are tremendous works in biotechnology especially in area of DNA molecules. The computer society is attempting to develop smaller computing devices through computational models which are based on the operations performed on the DNA molecules. A Watson-Crick automaton, a theoretical model for DNA based computation, has two reading heads, and works on double-stranded sequences of the input related by a complementarity relation similar with the Watson-Crick complementarity of DNA nucleotides. Over the time, several variants of Watson-Crick automata have been introduced and investigated. However, they cannot be used as suitable DNA based computational models for molecular stochastic processes and fuzzy processes that are related to important practical problems such as molecular parsing, gene disease detection, and food authentication. In this paper we define new variants of Watson-Crick automata, called weighted Watson-Crick automata, developing theoretical models for molecular stochastic and fuzzy processes. We define weighted Watson-Crick automata adapting weight restriction mechanisms associated with formal grammars and automata. We also study the generative capacities of weighted Watson-Crick automata, including probabilistic and fuzzy variants. We show that weighted variants of Watson-Crick automata increase their generative power

  13. Executive function in weight loss and weight loss maintenance: a conceptual review and novel neuropsychological model of weight control.

    Science.gov (United States)

    Gettens, Katelyn M; Gorin, Amy A

    2017-10-01

    Weight loss maintenance is a complex, multifaceted process that presents a significant challenge for most individuals who lose weight. A growing body of literature indicates a strong relationship between cognitive dysfunction and excessive body weight, and suggests that a subset of high-order cognitive processes known as executive functions (EF) likely play an important role in weight management. Recent reviews cover neuropsychological correlates of weight status yet fail to address the role of executive function in the central dilemma of successful weight loss maintenance. In this paper, we provide an overview of the existing literature examining executive functions as they relate to weight status and initial weight loss. Further, we propose a novel conceptual model of the relationships between EF, initial weight loss, and weight loss maintenance, mapping specific executive functions onto strategies known to be associated with both phases of the weight control process. Implications for the development of more efficacious weight loss maintenance interventions are discussed.

  14. Beliefs about causes of weight gain, effective weight gain prevention strategies, and barriers to weight management in the Australian population

    OpenAIRE

    Dryer, Rachel; Ware, Nicole

    2014-01-01

    Purpose: To identify beliefs held by the general public regarding causes of weight gain, weight prevention strategies, and barriers to weight management; and to examine whether such beliefs predict the actual body mass of participants. Methods: A questionnaire-based survey was administered to participants recruited from regional and metropolitan areas of Australia. This questionnaire obtained demographic information, height, weight; as well as beliefs about causes of weight gain, weight preve...

  15. Breastfeeding reduces postpartum weight retention

    DEFF Research Database (Denmark)

    Baker, Jennifer Lyn; Gamborg, Michael; Heitmann, Berit L

    2008-01-01

    BACKGROUND: Weight gained during pregnancy and not lost postpartum may contribute to obesity in women of childbearing age. OBJECTIVE: We aimed to determine whether breastfeeding reduces postpartum weight retention (PPWR) in a population among which full breastfeeding is common and breastfeeding...... duration is long. DESIGN: We selected women from the Danish National Birth Cohort who ever breastfed (>98%), and we conducted the interviews at 6 (n = 36 030) and 18 (n = 26 846) mo postpartum. We used regression analyses to investigate whether breastfeeding (scored to account for duration and intensity......) reduced PPWR at 6 and 18 mo after adjustment for maternal prepregnancy body mass index (BMI) and gestational weight gain (GWG). RESULTS: GWG was positively (P postpartum. Breastfeeding was negatively associated with PPWR in all women but those...

  16. Maternal Gestational and Postdelivery Weight Gain and Child Weight

    NARCIS (Netherlands)

    van Rossem, Lenie; Wijga, Alet H.; Gehring, Ulrike; Koppelman, Gerard H.; Smit, Henriette A.

    2015-01-01

    BACKGROUND: Maternal gestational weight gain (GWG) is a risk factor for the development of overweight in her child. It is unknown whether GWG programs the child's health or whether GWG indicates a shared familial lifestyle during childhood. To disentangle these influences, we studied the association

  17. Maternal gestational and postdelivery weight gain and child weight

    NARCIS (Netherlands)

    Van Rossem, Lenie; Wijga, Alet H.; Gehring, Ulrike; Koppelman, Gerard H.; Smit, Henriette A.

    2015-01-01

    BACKGROUND: Maternal gestational weight gain (GWG) is a risk factor for the development of overweight in her child. It is unknown whether GWG programs the child's health or whether GWG indicates a shared familial lifestyle during childhood. To disentangle these influences, we studied the association

  18. Birth weight recovery among very low birth weight infants surviving ...

    African Journals Online (AJOL)

    A multiple linear regression showed a negative association between ZSW at discharge and number of days nil per os without parenteral nutrition (PN). Antenatal steroids were associated with poor GV. There were no factors associated with regaining birth weight after 21 days on multiple logistic regression. Conclusion.

  19. Cerebral malaria: susceptibility weighted MRI

    Directory of Open Access Journals (Sweden)

    Vinit Baliyan

    2015-03-01

    Full Text Available Cerebral malaria is one of the fatal complications of Plasmodium falciparum infection. Pathogenesis involves cerebral microangiopathy related to microvascular plugging by infected red blood cells. Conventional imaging with MRI and CT do not reveal anything specific in case of cerebral malaria. Susceptibility weighted imaging, a recent advance in the MRI, is very sensitive to microbleeds related to microangiopathy. Histopathological studies in cerebral malaria have revealed microbleeds in brain parenchyma secondary to microangiopathy. Susceptibility weighted imaging, being exquisitely sensitive to microbleeds may provide additional information and improve the diagnostic accuracy of MRI in cerebral malaria.

  20. Effects of peroxidized corn oil on performance, AMEn, and abdominal fat pad weight in broiler chicks

    Science.gov (United States)

    There is a trend to use more alternative lipids in poultry diets, either through animal-vegetable blends, distillers corn oil, or yellow grease. This has resulted in the use of lipids in poultry diets with a higher concentration of unsaturated fatty acids which have a greater potential for peroxidat...

  1. FTO genotype and weight loss

    DEFF Research Database (Denmark)

    Livingstone, Katherine M; Celis-Morales, Carlos; Papandonatos, George D

    2016-01-01

    : Ovid Medline, Scopus, Embase, and Cochrane from inception to November 2015. ELIGIBILITY CRITERIA FOR STUDY SELECTION: Randomised controlled trials in overweight or obese adults reporting reduction in body mass index, body weight, or waist circumference by FTO genotype (rs9939609 or a proxy) after...

  2. Discrete fourier transformations with weight

    International Nuclear Information System (INIS)

    Wang Qin; Jiang Yong

    1988-01-01

    DFT and FFT with weight were considered and their properties were studied. The usual DFT and FFT were modified by reducing the number of sample points within a certain error band and therefore speeded up the computation. Finally, the practical applications of the new method in the fields of spectrum analysis, pulse tracing research and so on were pointed out

  3. Common weights under dea control

    International Nuclear Information System (INIS)

    Agrell, P.J.; Bogetoft, P.; Fristrup, P.

    2003-01-01

    DEA relies so far on endogenous local or exogenous general weights, limited to available information. We offer endogenous general prices based on a reformulation of DEA. The potential application could be to precipitate collective bargaining on cost efficiency. The models are exemplified with data from the Danish district heating plants, where the open evaluation of multiple non-priced outputs is relevant (au)

  4. Why Should I Lose Weight?

    Science.gov (United States)

    ... to lose weight too fast. • Think about your eating habits. Do you tend to mindlessly eat in front ... back on track. How should I change my eating habits? • Eat slowly, take smaller portions and avoid “seconds.” • ...

  5. "WOW" (War on Weight) Club

    Science.gov (United States)

    Harbour, Jane

    1976-01-01

    The article describes the content and successful use of the "WOW" Club Kit which provides general guidelines and 12 specific meeting outlines for public health nurses, home economics teachers and others with basic nutrition background to use in conducting nutrition and weight control programs in secondary schools. (MS)

  6. FTO genotype and weight loss

    DEFF Research Database (Denmark)

    Livingstone, Katherine M; Celis-Morales, Carlos; Papandonatos, George D

    2016-01-01

    OBJECTIVE: To assess the effect of the FTO genotype on weight loss after dietary, physical activity, or drug based interventions in randomised controlled trials. DESIGN: Systematic review and random effects meta-analysis of individual participant data from randomised controlled trials. DATA SOURC...

  7. Stores, Weight and Inertial System Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility provides stores weight, center of gravity, and inertia measurements in support of weapon/aircraft compatibility testing. System provides store weight...

  8. Effect of Smoking Cessation on Gestational and Postpartum Weight Gain and Neonatal Birth Weight

    DEFF Research Database (Denmark)

    Rode, Line; Kjærgaard, Hanne; Damm, Peter

    2013-01-01

    To examine the association among smoking cessation, gestational and postpartum weight gain, and neonatal birth weight.......To examine the association among smoking cessation, gestational and postpartum weight gain, and neonatal birth weight....

  9. 14 CFR 25.1519 - Weight, center of gravity, and weight distribution.

    Science.gov (United States)

    2010-01-01

    ... Information Operating Limitations § 25.1519 Weight, center of gravity, and weight distribution. The airplane weight, center of gravity, and weight distribution limitations determined under §§ 25.23 through 25.27... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Weight, center of gravity, and weight...

  10. 40 CFR 86.229-94 - Road load force, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... inertia weight class determination. 86.229-94 Section 86.229-94 Protection of Environment ENVIRONMENTAL... § 86.229-94 Road load force, test weight, and inertia weight class determination. (a) Flywheels... vehicle weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up-1,062 1,000 1,000...

  11. 40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... inertia weight class determination. 86.129-80 Section 86.129-80 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) Flywheels, electrical or other means of... weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up to 1,062 1,000 1,000 1...

  12. Breastfeeding Trends Among Very Low Birth Weight, Low Birth Weight, and Normal Birth Weight Infants.

    Science.gov (United States)

    Campbell, Angela G; Miranda, Patricia Y

    2018-05-18

    To examine the change in breastfeeding behaviors over time, among low birth weight (LBW), very low birth weight (VLBW), and normal birth weight (NBW) infants using nationally representative US data. Univariate statistics and bivariate logistic models were examined using the Early Child Longitudinal Study-Birth Cohort (2001) and National Study of Children's Health (2007 and 2011/2012). Breastfeeding behaviors improved for infants of all birth weights from 2007 to 2011/2012. In 2011/2012, a higher percentage of VLBW infants were ever breastfed compared with LBW and NBW infants. In 2011/2012, LBW infants had a 28% lower odds (95% CI, 0.57-0.92) of ever breastfeeding and a 52% lower odds (95% CI, 0.38-0.61) of breastfeeding for ≥6 months compared with NBW infants. Among black infants, a larger percentage of VLBW infants were breastfed for ≥6 months (26.2%) compared with LBW infants (14.9%). Breastfeeding rates for VLBW and NBW infants have improved over time. Both VLBW and NBW infants are close to meeting the Healthy People 2020 ever breastfeeding goal of 81.9%. LBW infants are farther from this goal than VLBW infants. The results suggest a need for policies that encourage breastfeeding specifically among LBW infants. Copyright © 2018 Elsevier Inc. All rights reserved.

  13. BIRTH WEIGHT : A COMMUNITY PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    J P SRIVASTAVA

    2003-06-01

    Full Text Available India has a dubious distinction of belonging to the top bracket of countries with a very high under-5 Mortality Rate (U5MR of above 96/1000 live births. The U5MR considered the single most significant basic indicator of health status of a community, is proportional to the Infant Mortality Rate (IMR which in turn is contributed to directly and indirectly by the incidence of low Birth Weight (LB W.About 25 million LB W are born each year consisting 17% of all live births,nearly 95% of them in developing countries. About 26% of newborns are LBW in India, and indeed over 16% in those countries with very high U5MR.Both preterm and small-for-dates almost equally make up this category of vulnerable infants predisposed to asphyxia, feeding problems, anemia and growth failure. Considering the close relationship of birth weight with perinatal and infant morbidity as well as mortality, it is crucial to identify the liigh risk groups of low birth weight babies as early as possible.Unfortunately, in a community where 80% of newborns never get to have their weight measured, this itself is a tall order. In our society, the cry of the newborn is greeted with anxious queries about the sex of the baby and not his well­being and potential for healthy survival. The basic concept of the importance of birth weight is missing even among educated families. Indeed, it is as if the weighing machine has no place in the requirements at childbirth. In the absence of this basic facility, field workers and TBAs must report to other means to identify babies at risk. Mid-arm circumference, thigh circumference, foot length, and skin-fold thickness etc. are measurements that have been correlated satisfactorily with the baby’s weight. Simple tools like coloured strips have been developed and these show promise of applicability in field situation for identification of LB W by TBAs for early referral.

  14. BIRTH WEIGHT : A COMMUNITY PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    J P SRIVASTAVA

    2003-06-01

    Full Text Available India has a dubious distinction of belonging to the top bracket of countries with a very high under-5 Mortality Rate (U5MR of above 96/1000 live births. The U5MR considered the single most significant basic indicator of health status of a community, is proportional to the Infant Mortality Rate (IMR which in turn is contributed to directly and indirectly by the incidence of low Birth Weight (LB W.About 25 million LB W are born each year consisting 17% of all live births,nearly 95% of them in developing countries. About 26% of newborns are LBW in India, and indeed over 16% in those countries with very high U5MR.Both preterm and small-for-dates almost equally make up this category of vulnerable infants predisposed to asphyxia, feeding problems, anemia and growth failure.Considering the close relationship of birth weight with perinatal and infant morbidity as well as mortality, it is crucial to identify the liigh risk groups of low birth weight babies as early as possible.Unfortunately, in a community where 80% of newborns never get to have their weight measured, this itself is a tall order. In our society, the cry of the newborn is greeted with anxious queries about the sex of the baby and not his well­being and potential for healthy survival. The basic concept of the importance of birth weight is missing even among educated families. Indeed, it is as if the weighing machine has no place in the requirements at childbirth. In the absence of this basic facility, field workers and TBAs must report to other means to identify babies at risk. Mid-arm circumference, thigh circumference, foot length, and skin-fold thickness etc. are measurements that have been correlated satisfactorily with the baby’s weight. Simple tools like coloured strips have been developed and these show promise of applicability in field situation for identification of LB W by TBAs for early referral.

  15. Polynomial weights and code constructions

    DEFF Research Database (Denmark)

    Massey, J; Costello, D; Justesen, Jørn

    1973-01-01

    polynomial included. This fundamental property is then used as the key to a variety of code constructions including 1) a simplified derivation of the binary Reed-Muller codes and, for any primepgreater than 2, a new extensive class ofp-ary "Reed-Muller codes," 2) a new class of "repeated-root" cyclic codes...... of long constraint length binary convolutional codes derived from2^r-ary Reed-Solomon codes, and 6) a new class ofq-ary "repeated-root" constacyclic codes with an algebraic decoding algorithm.......For any nonzero elementcof a general finite fieldGF(q), it is shown that the polynomials(x - c)^i, i = 0,1,2,cdots, have the "weight-retaining" property that any linear combination of these polynomials with coefficients inGF(q)has Hamming weight at least as great as that of the minimum degree...

  16. Weightlifting, weight training and injuries.

    Science.gov (United States)

    Basford, J R

    1985-08-01

    Although millions of men and women in the United States are regularly involved in some form of weightlifting, the average physician knows, and frequently cares, little about the sports involved. As a result, his or her knowledge of the medical and physiological issues involved is limited This article attempts to address this lack by beginning with a brief introductory section outlining some of the similarities differences between the major weight lifting approaches (power lifting, olympic lifting, weight training and body building). Next it reviews major issues and controversies such as age restrictions for lifters, physiological effects, drug use, potential strength gains and hypertrophy. Finally, it discusses some of the more frequent and unique injuries that can occur in lifters.

  17. Social causes of low birth weight.

    OpenAIRE

    Kogan, M D

    1995-01-01

    The manifest importance of reducing the incidence of low birth weight is most obvious for the first year of life: low birth weight is the single most important factor affecting infant morbidity and mortality. However, there is growing evidence that the adverse consequences of low birth weight continue throughout the life cycle. This review deals primarily with social causes of low birth weight.

  18. Can Beta Blockers Cause Weight Gain?

    Science.gov (United States)

    ... cause weight gain? Can beta blockers cause weight gain? Answers from Sheldon G. Sheps, M.D. Yes. Weight gain can occur as a side effect of some ... and metoprolol (Lopressor, Toprol-XL). The average weight gain is about 2.6 pounds (about 1.2 ...

  19. Weight Training for Strength and Power.

    Science.gov (United States)

    President's Council on Physical Fitness and Sports, Washington, DC.

    This paper begins by defining the terms "weight training,""weight lifting,""strength,""power," and "muscular endurance.""Weight training" is differentiated from "weight lifting" and defined as a systematic series of resistance exercises designed to promote physical development and conditioning or to rehabilitate persons who have suffered injury or…

  20. 7 CFR 981.9 - Kernel weight.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Kernel weight. 981.9 Section 981.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Definitions § 981.9 Kernel weight. Kernel weight means the weight of kernels, including...

  1. Asymptotics of weighted random sums

    DEFF Research Database (Denmark)

    Corcuera, José Manuel; Nualart, David; Podolskij, Mark

    2014-01-01

    of the weight process with respect to the Brownian motion when the distance between observations goes to zero. The result is obtained with the help of fractional calculus showing the power of this technique. This study, though interesting by itself, is motivated by an error found in the proof of Theorem 4...... in Corcuera, J.M. Nualart, D., Woerner, J. H. C. (2006). Power variation of some integral fractional processes, Bernoulli 12(4) 713-735....

  2. National neonatal weight policy survey.

    LENUS (Irish Health Repository)

    Walsh, B

    2012-02-01

    This survey was conducted to review the current practice regarding frequency of weight measurement in neonatal units in the Republic of Ireland, and whether these practices are in keeping with best practice as described in the literature. There was an 88.5% (23 of 26) response rate to this survey. 6 (26%) units had a written policy, and 16 (70%) had an unwritten agreed practice. In the Vermont Oxford Network\\'s potentially better practices daily weight measurements on newborn infants are recommended until the infant is stable and growing and then alternate day measurements The most common practices in this survey were to weigh infants on alternate days, this occurred in 9 (39%) units, and twice weekly in 6 (26%). Less than 31% of units had a separate policy for those less than 30 weeks, on assisted ventilation, or transitioning to enteral feeds. Most weigh infants on alternate days, and plot weights weekly, which is in keeping with best practice. Few units have separate policies for specific subgroups as is recommended in the limited literature. Consensus guidelines should be developed and promoted nationally.

  3. National neonatal weight policy survey.

    LENUS (Irish Health Repository)

    Walsh, B

    2009-06-01

    This survey was conducted to review the current practice regarding frequency of weight measurement in neonatal units in the Republic of Ireland, and whether these practices are in keeping with best practice as described in the literature. There was an 88.5% (23 of 26) response rate to this survey. 6 (26%) units had a written policy, and 16 (70%) had an unwritten agreed practice. In the Vermont Oxford Network\\'s potentially better practices daily weight measurements on newborn infants are recommended until the infant is stable and growing and then alternate day measurements The most common practices in this survey were to weigh infants on alternate days, this occurred in 9 (39%) units, and twice weekly in 6 (26%). Less than 31% of units had a separate policy for those less than 30 weeks, on assisted ventilation, or transitioning to enteral feeds. Most weigh infants on alternate days, and plot weights weekly, which is in keeping with best practice. Few units have separate policies for specific subgroups as is recommended in the limited literature. Consensus guidelines should be developed and promoted nationally.

  4. Weight, gravitation, inertia, and tides

    Science.gov (United States)

    Pujol, Olivier; Lagoute, Christophe; Pérez, José-Philippe

    2015-11-01

    This paper deals with the factors that influence the weight of an object near the Earth's surface. They are: (1) the Earth's gravitational force, (2) the centrifugal force due to the Earth's diurnal rotation, and (3) tidal forces due to the gravitational field of the Moon and Sun, and other solar system bodies to a lesser extent. Each of these three contributions is discussed and expressions are derived. The relationship between weight and gravitation is thus established in a direct and pedagogical manner readily understandable by undergraduate students. The analysis applies to the Newtonian limit of gravitation. The derivation is based on an experimental (or operational) definition of weight, and it is shown that it coincides with the Earth’s gravitational force modified by diurnal rotation around a polar axis and non-uniformity of external gravitational bodies (tidal term). Two examples illustrate and quantify these modifications, respectively the Eötvös effect and the oceanic tides; tidal forces due to differential gravitation on a spacecraft and an asteroid are also proposed as examples. Considerations about inertia are also given and some comments are made about a widespread, yet confusing, explanation of tides based on a centrifugal force. Finally, the expression of the potential energy of the tide-generating force is established rigorously in the appendix.

  5. Generalized Selection Weighted Vector Filters

    Directory of Open Access Journals (Sweden)

    Rastislav Lukac

    2004-09-01

    Full Text Available This paper introduces a class of nonlinear multichannel filters capable of removing impulsive noise in color images. The here-proposed generalized selection weighted vector filter class constitutes a powerful filtering framework for multichannel signal processing. Previously defined multichannel filters such as vector median filter, basic vector directional filter, directional-distance filter, weighted vector median filters, and weighted vector directional filters are treated from a global viewpoint using the proposed framework. Robust order-statistic concepts and increased degree of freedom in filter design make the proposed method attractive for a variety of applications. Introduced multichannel sigmoidal adaptation of the filter parameters and its modifications allow to accommodate the filter parameters to varying signal and noise statistics. Simulation studies reported in this paper indicate that the proposed filter class is computationally attractive, yields excellent performance, and is able to preserve fine details and color information while efficiently suppressing impulsive noise. This paper is an extended version of the paper by Lukac et al. presented at the 2003 IEEE-EURASIP Workshop on Nonlinear Signal and Image Processing (NSIP '03 in Grado, Italy.

  6. Weight, gravitation, inertia, and tides

    International Nuclear Information System (INIS)

    Pujol, Olivier; Lagoute, Christophe; Pérez, José-Philippe

    2015-01-01

    This paper deals with the factors that influence the weight of an object near the Earth's surface. They are: (1) the Earth's gravitational force, (2) the centrifugal force due to the Earth's diurnal rotation, and (3) tidal forces due to the gravitational field of the Moon and Sun, and other solar system bodies to a lesser extent. Each of these three contributions is discussed and expressions are derived. The relationship between weight and gravitation is thus established in a direct and pedagogical manner readily understandable by undergraduate students. The analysis applies to the Newtonian limit of gravitation. The derivation is based on an experimental (or operational) definition of weight, and it is shown that it coincides with the Earth’s gravitational force modified by diurnal rotation around a polar axis and non-uniformity of external gravitational bodies (tidal term). Two examples illustrate and quantify these modifications, respectively the Eötvös effect and the oceanic tides; tidal forces due to differential gravitation on a spacecraft and an asteroid are also proposed as examples. Considerations about inertia are also given and some comments are made about a widespread, yet confusing, explanation of tides based on a centrifugal force. Finally, the expression of the potential energy of the tide-generating force is established rigorously in the appendix. (paper)

  7. Obesity Prevention and Weight Maintenance After Loss.

    Science.gov (United States)

    German, Alexander James

    2016-09-01

    Obesity is one of the most prevalent medical diseases in pets. Outcomes are often disappointing; many animals either fail to reach target weight or regain weight. This article discusses managing obesity, focusing on prevention. It gives guidance on establishing monitoring programs that use regular body weight and condition assessments to identify animals at risk of inappropriate weight gain, enabling early intervention. Weight management in obese animals is a lifelong process. Regular weight and body condition monitoring are key to identifying animals that rebound early, while continuing to feed a therapeutic weight loss diet can help prevent it from happening. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Gestational Weight Gain and Interpregnancy Weight Change in Adolescent Mothers.

    Science.gov (United States)

    Whelan, Emily; Armson, B Anthony; Ashley-Martin, Jillian; MacSween, Kayla; Woolcott, Christy

    2017-06-01

    To examine the association between gestational weight gain (GWG) and interpregnancy weight change (IPWC) in adolescent mothers (younger than 20 years), and to determine if this association differs from adult women (aged 20-35 years). Retrospective cohort study. We included 3055 adolescents and 17,090 adult women with singleton pregnancies recorded in the Nova Scotia Atlee Perinatal Database with a subsequent pregnancy occurring between 2003 and 2014. GWG in the first pregnancy was categorized as below, within, or above the current Institute of Medicine recommendations. IPWC was defined as the difference between the prepregnancy weights of the 2 pregnancies. Analyses were adjusted for parity, body mass index in the first pregnancy, and time between pregnancies. Relative to adolescents with GWG within the recommendations, those who gained below had a 2.7 kg (95% confidence interval [CI], 1.4-3.9) lower mean IPWC whereas those who gained above had a 4.2 kg (95% CI, 3.3-5.1) higher mean IPWC. Smaller differences in IPWC between GWG categories were observed in adult women; relative to those with GWG within the recommendations, adults who gained below had a 1.3 kg (95% CI, 0.9-1.7) lower mean IPWC and those who gained above had a 2.9 kg (95% CI, 2.6-3.2) higher mean IPWC. Mean IPWC differed across GWG categories and the differences were greater in adolescents than in adult women. This difference should be considered when assessing whether specific GWG recommendations are needed for adolescents. Copyright © 2017 North American Society for Pediatric and Adolescent Gynecology. Published by Elsevier Inc. All rights reserved.

  9. The bid to lose weight: impact of social media on weight perceptions, weight control and diabetes.

    Science.gov (United States)

    Das, Leah; Mohan, Ranjini; Makaya, Tafadzwa

    2014-01-01

    Over the last decade the internet has come to permeate every aspect of our lives. With huge leaps in accessibility of the internet via mobile personal devices such as smart cellular phones and tablets, individuals are connected to the internet virtually all the time. It is no surprise therefore that social media now dominates the lives of many people within society. The authors take a look at how social media is influencing diabetes with particular focus on weight perception, weight management and eating behaviours. The authors explore the concept of how the advertising of Size 0 models and photo-shopping of images which are easily available on line and via social media is causing an increase in the number of young people with distorted body images. This has led to an increased number of people resorting to sometimes drastic weight loss programmes. We focus on the bid for 'low-fat' consumption and highlight how this could actually be leading to an increased risk for developing diabetes or worsening the complications of diabetes. We also discuss the increase of eating disorder in diabetes related to this distorted body image.

  10. Cancer Cachexia: Beyond Weight Loss.

    Science.gov (United States)

    Bruggeman, Andrew R; Kamal, Arif H; LeBlanc, Thomas W; Ma, Joseph D; Baracos, Vickie E; Roeland, Eric J

    2016-11-01

    Cancer cachexia is a multifactorial syndrome characterized by skeletal muscle loss leading to progressive functional impairment. Despite the ubiquity of cachexia in clinical practice, prevention, early identification, and intervention remain challenging. The impact of cancer cachexia on quality of life, treatment-related toxicity, physical function, and mortality are well established; however, establishing a clinically meaningful definition has proven challenging because of the focus on weight loss alone. Attempts to more comprehensively define cachexia through body composition, physical functioning, and molecular biomarkers, while promising, are yet to be routinely incorporated into clinical practice. Pharmacologic agents that have not been approved by the US Food and Drug Administration but that are currently used in cancer cachexia (ie, megestrol, dronabinol) may improve weight but not outcomes of interest such as muscle mass, physical activity, or mortality. Their routine use is limited by adverse effects. For the practicing oncologist, early identification and management of cachexia is critical. Oncologists must recognize cachexia beyond weight loss alone, focusing instead on body composition and physical functioning. In fact, becoming emaciated is a late sign of cachexia that characterizes its refractory stage. Given that cachexia is a multifactorial syndrome, it requires early identification and polymodal intervention, including optimal cancer therapy, symptom management, nutrition, exercise, and psychosocial support. Consequently, oncologists have a role in ensuring that these resources are available to their patients. In addition, in light of the promising investigational agents, it remains imperative to refer patients with cachexia to clinical trials so that available options can be expanded to effectively treat this pervasive problem.

  11. Polycystic ovary syndrome and weight management.

    Science.gov (United States)

    Moran, Lisa J; Lombard, Catherine B; Lim, Siew; Noakes, Manny; Teede, Helena J

    2010-03-01

    Polycystic ovary syndrome (PCOS) is a common condition in women of reproductive age, and has reproductive, metabolic and psychological implications. Weight gain and obesity worsen the features of PCOS, while weight loss improves the features of PCOS. While there are potential barriers to successful weight management in young women who do not suffer from PCOS, women with PCOS may experience additional barriers. Weight management strategies in younger women with or without PCOS should encompass both the prevention of excess weight gain and achieving and maintaining a reduced weight through multidisciplinary lifestyle management, comprising dietary, exercise and behavioral therapy, as well as attention to psychosocial stress and practical and physiological barriers to weight management. Further research is warranted in the examination of specific barriers to weight management in women with PCOS, as well as in the determination of optimal components of lifestyle weight management interventions in young women in order to facilitate long-term compliance.

  12. THE ATOMIC WEIGHT OF ANTIMONY

    Institute of Scientific and Technical Information of China (English)

    张青莲; 钱秋宇; 赵墨田

    1989-01-01

    With enriched antimony isotopes of 99.224 atom% 121Sb and 99.528 atom% 123Sb, twotracer solutions were prepared, whose antimony content was ascertained by the isotopicdilution analysis utilizing an accurately assayed laboratory standard. Mass spectrometricmeasurements were made on a Finnigan MAT- 261 instrument to find the ratio of masses121 and 123. Five synthetic mixtures formed from the tracers served to determine thecorrection factor of mass discrimination. The isotopic abundances thus found for the anti-mony in the mineral stibnite together with the known nuclidic masses yield an accurateatomic weight of antimony as 121 .7575± 0 .0009.

  13. Weight-controlled capillary viscometer

    Science.gov (United States)

    Digilov, Rafael M.; Reiner, M.

    2005-11-01

    The draining of a water column through a vertical discharge capillary tube is examined with the aid of a force sensor. The change of the mass of the liquid in the column with time is found to be not purely exponential as implied by Poiseuille's law. Using observed residuals associated with a kinetic energy correction, an approximate formula for the mass as a function of time is derived and excellent agreement with experimental data is attained. These results are verified by a viscosity test of distilled water at room temperature. A simple and inexpensive weight-controlled capillary viscometer is proposed that is especially suitable for undergraduate physics and chemistry laboratories.

  14. Moduli of weighted hyperplane arrangements

    CERN Document Server

    Lahoz, Martí; Macrí, Emanuele; Stellari, Paolo

    2015-01-01

    This book focuses on a large class of geometric objects in moduli theory and provides explicit computations to investigate their families. Concrete examples are developed that take advantage of the intricate interplay between Algebraic Geometry and Combinatorics. Compactifications of moduli spaces play a crucial role in Number Theory, String Theory, and Quantum Field Theory – to mention just a few. In particular, the notion of compactification of moduli spaces has been crucial for solving various open problems and long-standing conjectures. Further, the book reports on compactification techniques for moduli spaces in a large class where computations are possible, namely that of weighted stable hyperplane arrangements.

  15. [Fast food promotes weight gain].

    Science.gov (United States)

    Stender, Steen; Dyerberg, Jørn; Astrup, Arne V

    2007-05-07

    The total amounts of fat in a fast food menu consisting of French fries and fried Chicken Nuggets from McDonald's and KFC, respectively, bought in 35 different countries vary from 41 to 71 gram. In most countries the menu contained unacceptably high amounts of industrially-produced trans fat which contributes to an increased risk of ischaemic heart disease, weight gain, abdominal fat accumulation and type 2 diabetes. The quality of the ingredients in fast food ought to be better and the size of the portions smaller and less energy-dense so that frequent fast food meals do not increase the risk of obesity and diseases among customers.

  16. Gender Differences in Weight Loss: Evidence from a NHS Weight Management Service

    OpenAIRE

    BHOGAL, Manpal Singh; Langford, Robert

    2014-01-01

    Provides evidence that men lose more weight than women when enrolled on a weight loss intervention.\\ud •\\ud Men lose more weight than women from their initial assessment up to 12-months.\\ud •\\ud Men maintain their weight and continue to lose more weight postintervention compared to women.

  17. Risco de intoxicação profissional por tricloroetileno em processos de desengraxamento no município de São Paulo, Brasil Risk of occupational intoxication due to trichloroethvlene in grease removal operations in the county of S. Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Herbert M. A. Stettiner

    1977-09-01

    Full Text Available A toxicidade de vapores de tricloroetileno (TRI em locais de trabalho é posta em evidência. Determinou-se a concentração de vapores de TRI no ar em fábricas e oficinas onde o líquido serve para desengraxar peças metálicas. Os metabólitos do TRI, o ácido tricloroacético e o tricloroetanol foram determinados em urina de pessoas expostas. Os resultados destas determinações permitem ver a periculosidade potencial que o uso do TRI apresenta.The toxic effects of trichloroethylene (TRI vapors are explained. The TRI vapors have been determined in the air of workingplaces where the liquid is used to remove oil and grease from metal surfaces. Its metabolites, tricehorocetic acid and trichloroethanol have been determined in the urine of exposed persons. The TRI vapors concentrations and urinary TCA resuts confirm the potential danger represented by the use of trichloroethylene in decreasing processes.

  18. Weighted OFDM for wireless multipath channels

    DEFF Research Database (Denmark)

    Prasad, Ramjee; Nikookar, H.

    2000-01-01

    In this paper the novel method of "weighted OFDM" is addressed. Different types of weighting factors (including Rectangular, Bartlett, Gaussian. Raised cosine, Half-sin and Shanon) are considered. The impact of weighting of OFDM on the peak-to-average power ratio (PAPR) is investigated by means...... of simulation and is compared for the above mentioned weighting factors. Results show that by weighting of the OFDM signal the PAPR reduces. Bit error performance of weighted multicarrier transmission over a multipath channel is also investigated. Results indicate that there is a trade off between PAPR...

  19. Optimal Weighting for Exam Composition

    Directory of Open Access Journals (Sweden)

    Sam Ganzfried

    2018-03-01

    Full Text Available A problem faced by many instructors is that of designing exams that accurately assess the abilities of the students. Typically, these exams are prepared several days in advance, and generic question scores are used based on rough approximation of the question difficulty and length. For example, for a recent class taught by the author, there were 30 multiple choice questions worth 3 points, 15 true/false with explanation questions worth 4 points, and 5 analytical exercises worth 10 points. We describe a novel framework where algorithms from machine learning are used to modify the exam question weights in order to optimize the exam scores, using the overall final score as a proxy for a student’s true ability. We show that significant error reduction can be obtained by our approach over standard weighting schemes, i.e., for the final and midterm exam, the mean absolute error for prediction decreases by 90.58% and 97.70% for linear regression approach respectively resulting in better estimation. We make several new observations regarding the properties of the “good” and “bad” exam questions that can have impact on the design of improved future evaluation methods.

  20. Weight loss and weight loss maintenance efficacy of a novel weight loss program: The retrospective RNPC® cohort

    DEFF Research Database (Denmark)

    Thorning, Tanja Kongerslev; Fabre, Odile; Legrand, Rémy

    2018-01-01

    or obese patients treated in 54 RNPC® weight loss clinics in France. Results: A total of 10,809 (89%) patients completed the initial weight loss phase and 2996 (25%) completed the full program. Median weight loss percentage was 10.7% (Interquartile range [IQR]: 5.8; 16.5) after a median of 105 days (IQR...

  1. Mediation of Weight Loss and Weight Loss Maintenance through Dietary Disinhibition and Restraint.

    Science.gov (United States)

    JaKa, Meghan M; Sherwood, Nancy E; Flatt, Shirley W; Pacanowski, Carly R; Pakiz, Bilgé; Thomson, Cynthia A; Rock, Cheryl L

    2015-04-01

    Understanding the degree to which eating behaviors, such as disinhibition and restraint, are associated with weight loss and weight loss maintenance could contribute to further refinement of effective weight management intervention strategies. The purpose of this analysis was to examine if these factors mediate weight loss or weight loss maintenance using data from a randomized controlled trial testing a commercial weight loss program that delivered behavioral counseling and structured meal plans including prepackaged foods. Mediation analyses were used to examine whether changes in disinhibition and restraint mediated the relationship between intervention and weight change during initial weight loss (0-6 months), continued weight loss (6-12 months), or weight loss maintenance (12-24 months) phases. Only decreases in disinhibition between baseline and 6 months mediated the intervention effect on initial weight loss. Our results suggest the mediation effects of these eating behaviors are modest and other factors contribute to a larger, more complex long-term weight loss prognosis.

  2. Healthy Weight Management for New Moms

    Science.gov (United States)

    Some women love being pregnant; others have a really hard time with it. Either way, returning to a healthy weight after you deliver your baby may lower your chances of diabetes, heart disease, and other weight-related problems.

  3. Disease Human - MDC_LowBirthWeight

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Polygon feature class based on Zip Code boundaries showing the percentage of babies born in Miami-Dade County in 2006 with low birth weights. Low birth weight is...

  4. Assessing Your Weight and Health Risk

    Science.gov (United States)

    ... Health Professional Resources Assessing Your Weight and Health Risk Assessment of weight and health risk involves using ... risk for developing obesity-associated diseases or conditions. Risk Factors for Health Topics Associated With Obesity Along ...

  5. Herbal remedies and supplements for weight loss

    Science.gov (United States)

    Weight loss - herbal remedies and supplements; Obesity - herbal remedies; Overweight - herbal remedies ... health care provider. Nearly all over-the-counter supplements with claims of weight-loss properties contain some ...

  6. Physical Activity for a Healthy Weight

    Science.gov (United States)

    ... Weight Breastfeeding Micronutrient Malnutrition State and Local Programs Physical Activity for a Healthy Weight Language: English Español (Spanish) ... calories are used in typical activities? Why is physical activity important? Regular physical activity is important for good ...

  7. Investigation of Galactosylated Low Molecular Weight Chitosan ...

    African Journals Online (AJOL)

    was coupled with low molecular weight chitosan (LMWC) using carbodiimide chemistry. .... High molecular weight chitosan (minimum 85% ..... membrane permeability of drug and mutual repulsion ... coating thickness and the lower solubility of.

  8. Should providers encourage realistic weight expectations and satisfaction with lost weight in commercial weight loss programs? a preliminary study.

    Science.gov (United States)

    Ames, Gretchen E; Thomas, Colleen S; Patel, Roshni H; McMullen, Jillian S; Lutes, Lesley D

    2014-01-01

    Attrition is a problem among patients who participate in commercial weight loss programs. One possible explanation is that if patients are unable to reach a weight that they expect to achieve, they may be more likely to drop out of treatment. This study investigated variables associated with attrition among 30 obese patients who completed a liquid meal replacement program (LMR) and enrolled in a 52-week Small Changes Maintenance intervention (SCM). Patients lost a median 18% of body weight during LMR and completed assessments about weight expectations and weight satisfaction pre- and post-SCM. Of the 30 patients who started SCM, 8 (27%) were lost to attrition. Odds of SCM attrition were higher in patients who lost ≤ 18.2% of pre-LMR weight (OR: 12.25, P = 0.035), had lower satisfaction (≤7) pre-SCM (OR: 10.11, P = 0.040), and who expected further weight loss of 9.1 kg or more pre-SCM (OR: 10.11, P = 0.040). SCM completers significantly increased weight loss expectations by a median of 2.3 kg from pre-SCM to post-SCM (WSR P = 0.049) that paralleled weight regained post-SCM (2.7 kg). After completion of a medically-supervised commercial weight loss program, patients with the greatest expectations for further weight loss and the lowest weight satisfaction were more likely to drop out of SCM. Failure to participate in maintenance treatment may lead to regain of greater than half of lost weight over the next year. Among SCM completers, lower expectations for further weight loss and greater weight satisfaction appeared to be associated with continued engagement in maintenance treatment.

  9. Oral Lactobacillus Counts Predict Weight Gain Susceptibility

    DEFF Research Database (Denmark)

    Rosing, Johanne Aviaja; Walker, Karen Christina; Jensen, Benjamin Anderschou Holbech

    2017-01-01

    Background: Recent studies have shown an association between weight change and the makeup of the intestinal microbiota in humans. Specifically, Lactobacillus, a part of the entire gastrointestinal tract's microbiota, has been shown to contribute to weight regulation. Aim: We examined the associat......Background: Recent studies have shown an association between weight change and the makeup of the intestinal microbiota in humans. Specifically, Lactobacillus, a part of the entire gastrointestinal tract's microbiota, has been shown to contribute to weight regulation. Aim: We examined...

  10. Weight gain following treatment of hyperthyroidism.

    Science.gov (United States)

    Dale, J; Daykin, J; Holder, R; Sheppard, M C; Franklyn, J A

    2001-08-01

    Patients frequently express concern that treating hyperthyroidism will lead to excessive weight gain. This study aimed to determine the extent of, and risk factors for, weight gain in an unselected group of hyperthyroid patients. We investigated 162 consecutive hyperthyroid patients followed for at least 6 months. Height, weight, clinical features, biochemistry and management were recorded at each clinic visit. Documented weight gain was 5.42 +/- 0.46 kg (mean +/- SE) and increase in BMI was 8.49 +/- 0.71%, over a mean 24.2 +/- 1.6 months. Pre-existing obesity, Graves' disease causing hyperthyroidism, weight loss before presentation and length of follow-up each independently predicted weight gain. Patients treated with thionamides or radioiodine gained a similar amount of weight (thionamides, n = 87, 5.16 +/- 0.63 kg vs. radioiodine, n = 62, 4.75 +/- 0.57 kg, P = 0.645), but patients who underwent thyroidectomy (n = 13) gained more weight (10.27 +/- 2.56 kg vs. others, P = 0.007). Development of hypothyroidism (even transiently) was associated with weight gain (never hypothyroid, n = 102, 4.57 +/- 0.52 kg, transiently hypothyroid, n = 29, 5.37 +/- 0.85 kg, on T4, n = 31, 8.06 +/- 1.42 kg, P = 0.014). This difference remained after correcting for length of follow-up. In the whole cohort, weight increased by 3.95 +/- 0.40 kg at 1 year (n = 144) to 9.91 +/- 1.62 kg after 4 years (n = 27) (P = 0.008), representing a mean weight gain of 3.66 +/- 0.44 kg/year. We have demonstrated marked weight gain after treatment of hyperthyroidism. Pre-existing obesity, a diagnosis of Graves' disease and prior weight loss independently predicted weight gain and weight continued to rise with time. Patients who became hypothyroid, despite T4 replacement, gained most weight.

  11. Fast Weight Long Short-Term Memory

    OpenAIRE

    Keller, T. Anderson; Sridhar, Sharath Nittur; Wang, Xin

    2018-01-01

    Associative memory using fast weights is a short-term memory mechanism that substantially improves the memory capacity and time scale of recurrent neural networks (RNNs). As recent studies introduced fast weights only to regular RNNs, it is unknown whether fast weight memory is beneficial to gated RNNs. In this work, we report a significant synergy between long short-term memory (LSTM) networks and fast weight associative memories. We show that this combination, in learning associative retrie...

  12. Heritability of gestational weight gain

    DEFF Research Database (Denmark)

    Andersson, Elina Scheers; Silventoinen, Karri; Tynelius, Per

    2015-01-01

    Gestational weight gain (GWG) is a complex trait involving intrauterine environmental, maternal environmental, and genetic factors. However, the extent to which these factors contribute to the total variation in GWG is unclear. We therefore examined the genetic and environmental influences...... on the variation in GWG in the first and second pregnancy in monozygotic (MZ) and dizygotic (DZ) twin mother-pairs. Further, we explored if any co-variance existed between factors influencing the variation in GWG of the mothers’ first and second pregnancies. By using Swedish nationwide record-linkage data, we...... identified 694 twin mother-pairs with complete data on their first pregnancy and 465 twin mother-pairs with complete data on their second pregnancy during 1982–2010. For a subanalysis, 143 twin mother-pairs had complete data on two consecutive pregnancies during the study period. We used structural equation...

  13. Psychological workload and body weight

    DEFF Research Database (Denmark)

    Overgaard, Dorthe; Gyntelberg, Finn; Heitmann, Berit L

    2004-01-01

    on the association between obesity and psychological workload. METHOD: We carried out a review of the associations between psychological workload and body weight in men and women. In total, 10 cross-sectional studies were identified. RESULTS: The review showed little evidence of a general association between...... adjustment for education. For women, there was no evidence of a consistent association. CONCLUSION: The reviewed articles were not supportive of any associations between psychological workload and either general or abdominal obesity. Future epidemiological studies in this field should be prospective......BACKGROUND: According to Karasek's Demand/Control Model, workload can be conceptualized as job strain, a combination of psychological job demands and control in the job. High job strain may result from high job demands combined with low job control. Aim To give an overview of the literature...

  14. Osteoarthritis, obesity and weight loss

    DEFF Research Database (Denmark)

    Bliddal, Henning; Leeds, A R; Christensen, Robin Daniel Kjersgaard

    2014-01-01

    Obesity is widely acknowledged as a risk factor for both the incidence and progression of osteoarthritis, and has a negative influence on outcomes. Loss of at least 10% of body weight, coupled with exercise, is recognized as a cornerstone in the management of obese patients with osteoarthritis......, and can lead to significant improvement in symptoms, pain relief, physical function and health-related quality of life. However, questions still remain surrounding optimal management. Given the significant health, social and economic burden of osteoarthritis, especially in obese patients, it is imperative...... to advance our knowledge of osteoarthritis and obesity, and apply this to improving care and outcomes. This paper overviews what is already known about osteoarthritis and obesity, discusses current key challenges and ongoing hypotheses arising from research in these areas, and finally, postulates what...

  15. The daily weight gain, growth rate and length-weight relationships of ...

    African Journals Online (AJOL)

    The daily weight gain, growth rate and length-weight relationships of Clarias gariepinus, Heterobranchus longifilis and their reciprocal hybrids (Pisces: Clariidae) reared under ambient environmental conditions.

  16. Weight Control: MedlinePlus Health Topic

    Science.gov (United States)

    ... loss medications Show More Show Less Related Health Topics Body Weight Diets Eating Disorders Exercise and Physical Fitness Nutrition Obesity Weight Loss Surgery National Institutes of Health The primary NIH organization for research on Weight Control is the National Institute of ...

  17. Nuttall Oak Volume and Weight Tables

    Science.gov (United States)

    Bryce E. Schlaegel; Regan B. Willson

    1983-01-01

    Volume and weight tables were constructed from a 62-tree sample of Nuttall oak (Quercus nuttallii Palmer) taken in the Mississippi Delta. The tables present volume, green weight, and dry weight of bole wood, bole wood plus bark, and total tree above a one-foot stump as predicted from the nonlinear model Y = 0Db

  18. 38 CFR 4.112 - Weight loss.

    Science.gov (United States)

    2010-07-01

    .... The term “inability to gain weight” means that there has been substantial weight loss with inability... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Weight loss. 4.112... DISABILITIES Disability Ratings The Digestive System § 4.112 Weight loss. For purposes of evaluating conditions...

  19. Regression Equations for Birth Weight Estimation using ...

    African Journals Online (AJOL)

    In this study, Birth Weight has been estimated from anthropometric measurements of hand and foot. Linear regression equations were formed from each of the measured variables. These simple equations can be used to estimate Birth Weight of new born babies, in order to identify those with low birth weight and referred to ...

  20. Path Minima Queries in Dynamic Weighted Trees

    DEFF Research Database (Denmark)

    Davoodi, Pooya; Brodal, Gerth Stølting; Satti, Srinivasa Rao

    2011-01-01

    In the path minima problem on a tree, each edge is assigned a weight and a query asks for the edge with minimum weight on a path between two nodes. For the dynamic version of the problem, where the edge weights can be updated, we give data structures that achieve optimal query time\\todo{what about...

  1. 23 CFR 658.17 - Weight.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Weight. 658.17 Section 658.17 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS TRUCK SIZE AND WEIGHT, ROUTE... agency transit passenger bus, is excluded from the axle weight limits in paragraphs (c) through (e) of...

  2. A method of estimating log weights.

    Science.gov (United States)

    Charles N. Mann; Hilton H. Lysons

    1972-01-01

    This paper presents a practical method of estimating the weights of logs before they are yarded. Knowledge of log weights is required to achieve optimum loading of modern yarding equipment. Truckloads of logs are weighed and measured to obtain a local density index (pounds per cubic foot) for a species of logs. The density index is then used to estimate the weights of...

  3. Biased trapping issue on weighted hierarchical networks

    Indian Academy of Sciences (India)

    archical networks which are based on the classic scale-free hierarchical networks. ... Weighted hierarchical networks; weight-dependent walks; mean first passage ..... The weighted networks can mimic some real-world natural and social systems to ... the Priority Academic Program Development of Jiangsu Higher Education ...

  4. Is Weight Training Safe during Pregnancy?

    Science.gov (United States)

    Work, Janis A.

    1989-01-01

    Examines the opinions of several experts on the safety of weight training during pregnancy, noting that no definitive research on weight training alone has been done. Experts agree that low-intensity weight training probably poses no harm for mother or fetus; exercise programs should be individualized. (SM)

  5. Weight Watchers on prescription: An observational study of weight change among adults referred to Weight Watchers by the NHS

    Directory of Open Access Journals (Sweden)

    Aston Louise M

    2011-06-01

    Full Text Available Abstract Background The scale of overweight and obesity in the UK places a considerable burden on the NHS. In some areas the NHS has formed partnerships with commercial companies to offer weight management services, but there has been little evaluation of these schemes. This study is an independent audit of the Weight Watchers NHS Referral scheme and evaluates the weight change of obese and overweight adults referred to Weight Watchers (WW by the NHS. Method Data was obtained from the WW NHS Referral Scheme database for 29,326 referral courses started after 2nd April 2007 and ending before 6th October 2009 [90% female; median age 49 years (IQR 38 - 61 years; median BMI 35.1 kg/m2 (IQR 31.8 - 39.5 kg/m2. Participants received vouchers (funded by the PCT following referral by a healthcare professional to attend 12 WW meetings. Body weight was measured at WW meetings and relayed to the central database. Results Median weight change for all referrals was -2.8 kg [IQR -5.9 - -0.7 kg] representing -3.1% initial weight. 33% of all courses resulted in loss of ≥5% initial weight. 54% of courses were completed. Median weight change for those completing a first course was -5.4 kg [IQR -7.8 - -3.1 kg] or -5.6% of initial weight. 57% lost ≥5% initial weight. Conclusions A third of all patients who were referred to WW through the WW NHS Referral Scheme and started a 12 session course achieved ≥5% weight loss, which is usually associated with clinical benefits. This is the largest audit of NHS referral to a commercial weight loss programme in the UK and results are comparable with other options for weight loss available through primary care.

  6. First-day newborn weight loss predicts in-hospital weight nadir for breastfeeding infants.

    Science.gov (United States)

    Flaherman, Valerie J; Bokser, Seth; Newman, Thomas B

    2010-08-01

    Exclusive breastfeeding reduces infant infectious disease. Losing > or =10% birth weight may lead to formula use. The predictive value of first-day weight loss for subsequent weight loss has not been studied. The objective of the present study was to evaluate the relationship between weight loss at or =10%. For 1,049 infants, we extracted gestational age, gender, delivery method, feeding type, and weights from medical records. Weight nadir was defined as the lowest weight recorded during birth hospitalization. We used multivariate logistic regression to assess the effect of first-day weight loss on subsequent in-hospital weight loss. Mean in-hospital weight nadir was 6.0 +/- 2.6%, and mean age at in-hospital weight nadir was 38.7 +/- 18.5 hours. While in the hospital 6.4% of infants lost > or =10% of birth weight. Infants losing > or =4.5% birth weight at or =10% (adjusted odds ratio 3.57 [1.75, 7.28]). In this cohort, 798 (76.1%) infants did not have documented weight gain while in the hospital. Early weight loss predicts higher risk of > or =10% in-hospital weight loss. Infants with high first-day weight loss could be targeted for further research into improved interventions to promote breastfeeding.

  7. Centrality measures for immunization of weighted networks

    Directory of Open Access Journals (Sweden)

    Mohammad Khansari

    2016-03-01

    Full Text Available Effective immunization of individual communities with minimal cost in vaccination has made great discussion surrounding the realm of complex networks. Meanwhile, proper realization of relationship among people in society and applying it to social networks brings about substantial improvements in immunization. Accordingly, weighted graph in which link weights represent the intensity and intimacy of relationships is an acceptable approach. In this work we employ weighted graphs and a wide variety of weighted centrality measures to distinguish important individuals in contagion of diseases. Furthermore, we propose new centrality measures for weighted networks. Our experimental results show that Radiality-Degree centrality is satisfying for weighted BA networks. Additionally, PageRank-Degree and Radiality-Degree centralities showmoreacceptable performance in targeted immunization of weighted networks.

  8. Psychophysics of the probability weighting function

    Science.gov (United States)

    Takahashi, Taiki

    2011-03-01

    A probability weighting function w(p) for an objective probability p in decision under risk plays a pivotal role in Kahneman-Tversky prospect theory. Although recent studies in econophysics and neuroeconomics widely utilized probability weighting functions, psychophysical foundations of the probability weighting functions have been unknown. Notably, a behavioral economist Prelec (1998) [4] axiomatically derived the probability weighting function w(p)=exp(-() (01e)=1e,w(1)=1), which has extensively been studied in behavioral neuroeconomics. The present study utilizes psychophysical theory to derive Prelec's probability weighting function from psychophysical laws of perceived waiting time in probabilistic choices. Also, the relations between the parameters in the probability weighting function and the probability discounting function in behavioral psychology are derived. Future directions in the application of the psychophysical theory of the probability weighting function in econophysics and neuroeconomics are discussed.

  9. Weight self-regulation process in adolescence: the relationship between control weight attitudes, behaviors and body weight status

    Directory of Open Access Journals (Sweden)

    Jordi ePich

    2015-05-01

    Full Text Available Adolescents’ self-control weight behaviors were assessed (n= 1961; 12-17 years old; 2007-2008 in the Balearic Islands, Spain. The study analyzed the relationships between body weight status, body image and self-weight concern, and actual attempts to lose weight by restrained eating and/or increased exercising. In terms of regulatory focus theory (RFT, we considered that efforts to lose or to maintain weight (successful or failed would be motivated either by a promotion focus (to show an attractive body, a prevention focus (to avoid social rejection of fatness, or both. Results showed that 41% of overweight boys and 25% of obese boys stated that they had never made any attempt to lose weight, and 13% and 4% in females. Around half of overweight boys and around a quarter of obese boys stated that they were Not at all concerned about weight gain, and girls’ percentages decreased to 13% and 11% respectively. By contrast 57% of normal weight girls monitored their weight and stated that they had tried to slim at least once. Weight self-regulation in females attempted to combine diet and exercise, while boys relied almost exclusively on exercise. Apparent lack of consciousness of body weight status among overweight boys, and more important, subsequent absence of behaviors to reduce their weight clearly challenges efforts to prevent obesity. We argue that several causes may be involved in this outcome, including unconscious emotional (self-defense and cognitive (dissonance mechanisms driven by perceived social stigmatization of obesity. The active participation of social values of male and female body image (strong vs. pretty and the existence of social habituation to overweight are suggested. A better knowledge of psychosocial mechanisms underlying adolescent weight self-control may improve obesity epidemics.

  10. Serum Concentration of Leptin in Pregnant Adolescents Correlated with Gestational Weight Gain, Postpartum Weight Retention and Newborn Weight/Length

    Directory of Open Access Journals (Sweden)

    Reyna Sámano

    2017-09-01

    Full Text Available Introduction: Gestational weight gain is an important modifiable factor known to influence fetal outcomes including birth weight and adiposity. Leptin is normally correlated with adiposity and is also known to increase throughout pregnancy, as the placenta becomes a source of leptin synthesis. Several studies have reported positive correlations between cord blood leptin level and either birthweight or size for gestational age, as well as body mass index (BMI. Objective: To determine the correlation of prenatal leptin concentration in pregnant adolescents with their gestational weight gain, postpartum weight retention, and weight/length of their newborn. Methods: A cohort study was conducted on pregnant Mexican adolescents from Gestational Week 26–28 to three months postpartum (n = 168 mother–child dyads. An anthropometric assessment was made of each pregnant adolescent, and the serum level of leptin and the intake of energy were determined. The newborn was evaluated each month during postpartum. Clinical records were reviewed to obtain sociodemographic data. Bivariate correlations, tests for repeating measurements and logistic regression models were performed. Results: Leptin concentration gradually increased during the third trimester of pregnancy. At Gestation Week 36, leptin level correlated with gestational weight gain. When comparing adolescents that had the lowest and highest concentration of leptin, the former presented a mean of 6 kg less in gestational weight gain (inter-subject leptin concentration, p = 0.001; inter-subject energy intake, p = 0.497. Leptin concentration and gestational weight gain exerted an effect on the weight of the newborn (inter-subject leptin concentration for Week 32, p = 0.024; inter-subject gestational weight gain, p = 0.011. Newborn length was associated with leptin concentration at Week 28 (leptin effect, p = 0.003; effect of gestational weight gain, p = 0.722. Conclusions: Pregnant adolescents with

  11. Serum Concentration of Leptin in Pregnant Adolescents Correlated with Gestational Weight Gain, Postpartum Weight Retention and Newborn Weight/Length.

    Science.gov (United States)

    Sámano, Reyna; Martínez-Rojano, Hugo; Chico-Barba, Gabriela; Godínez-Martínez, Estela; Sánchez-Jiménez, Bernarda; Montiel-Ojeda, Diana; Tolentino, Maricruz

    2017-09-27

    Introduction : Gestational weight gain is an important modifiable factor known to influence fetal outcomes including birth weight and adiposity. Leptin is normally correlated with adiposity and is also known to increase throughout pregnancy, as the placenta becomes a source of leptin synthesis. Several studies have reported positive correlations between cord blood leptin level and either birthweight or size for gestational age, as well as body mass index (BMI). Objective : To determine the correlation of prenatal leptin concentration in pregnant adolescents with their gestational weight gain, postpartum weight retention, and weight/length of their newborn. Methods : A cohort study was conducted on pregnant Mexican adolescents from Gestational Week 26-28 to three months postpartum ( n = 168 mother-child dyads). An anthropometric assessment was made of each pregnant adolescent, and the serum level of leptin and the intake of energy were determined. The newborn was evaluated each month during postpartum. Clinical records were reviewed to obtain sociodemographic data. Bivariate correlations, tests for repeating measurements and logistic regression models were performed. Results : Leptin concentration gradually increased during the third trimester of pregnancy. At Gestation Week 36, leptin level correlated with gestational weight gain. When comparing adolescents that had the lowest and highest concentration of leptin, the former presented a mean of 6 kg less in gestational weight gain (inter-subject leptin concentration, p = 0.001; inter-subject energy intake, p = 0.497). Leptin concentration and gestational weight gain exerted an effect on the weight of the newborn (inter-subject leptin concentration for Week 32, p = 0.024; inter-subject gestational weight gain, p = 0.011). Newborn length was associated with leptin concentration at Week 28 (leptin effect, p = 0.003; effect of gestational weight gain, p = 0.722). Conclusions : Pregnant adolescents with leptin

  12. Determinants of weight regain after bariatric surgery.

    Science.gov (United States)

    Bastos, Emanuelle Cristina Lins; Barbosa, Emília Maria Wanderley Gusmão; Soriano, Graziele Moreira Silva; dos Santos, Ewerton Amorim; Vasconcelos, Sandra Mary Lima

    2013-01-01

    Bariatric surgery leads to an average loss of 60-75% of excess body weight with maximum weight loss in the period between 18 and 24 months postoperatively. However, several studies show that weight is regained from two years of operation. To identify the determinants of weight regain in post-bariatric surgery users. Prospective cross-sectional study with 64 patients who underwent bariatric surgery with postoperative time > 2 years valued at significant weight regain. The variables analyzed were age, sex, education, socioeconomic status, work activity related to food, time after surgery, BMI, percentage of excess weight loss, weight gain, attendance monitoring nutrition, lifestyle, eating habits, self-perception of appetite, daily use of nutritional supplements and quality of life. There were 57 (89%) women and 7 (11%) men, aged 41.76 ± 7.93 years and mean postoperative period of 53.4 ± 18.4 months. The average weight and BMI were respectively 127.48 ± 24.2 kg and 49.56 ± 6.7 kg/m2 at surgery. The minimum weight and BMI were achieved 73.0 ± 18.6 kg and 28.3 ± 5.5 kg/m2, reached in 23.7 ± 12 months postoperatively. Regained significant weight occurred in 18 (28.1%) cases. The mean postoperative period of 66 ± 8.3 months and work activities related to food showed statistical significance (p=000 and p=0.003) for the regained weight. Bariatric surgery promotes adequate reduction of excess body weight, with significant weight regain observed after five years; post-operative time and work activity related to eating out as determining factors for the occurrence of weight regain.

  13. Birth weight and perinatal mortality: A comparison of "optimal" birth weight in seven western European countries

    NARCIS (Netherlands)

    Graafmans, W.C.; Richardus, J.H.; Borsboom, G.J.J.M.; Bakketeig, L.; Langhoff-Roos, J.; Bergsjø, P.; Macfarlane, A.; Verloove-Vanhorick, P.; Mackenbach, J.; Aelvoet, W.; Alderdice, F.; Amelink, M.; Bakoula, C.; Blondel, B.; Bødker, B.; Bolumar, F.; Davidson, L.; Gissler, M.; Hartikainen, A.L.; Holt, J.; Kaminski, M.; Leidinger, J.; Lekea, V.; Lindmark, G.; Masuy-Stroobant, G.; Pal, K. van der; Penney, G.; Purificação Araújo, M. Da; Rantakallio, P.; Rebagliato, M.

    2002-01-01

    Background. Previous studies have suggested that a population's entire birth weight distribution may be shifted towards higher or lower birth weights, and that optimal birth weight may be lower in populations with a lower average birth weight. We evaluated this hypothesis for seven western European

  14. Effects of dairy intake on weight maintenance

    Directory of Open Access Journals (Sweden)

    Sun Xiaocun

    2008-10-01

    Full Text Available Abstract Background To compare the effects of low versus recommended levels of dairy intake on weight maintenance and body composition subsequent to weight loss. Design and Methods Two site (University of Kansas-KU; University of Tennessee-UT, 9 month, randomized trial. Weight loss was baseline to 3 months, weight maintenance was 4 to 9 months. Participants were maintained randomly assigned to low dairy ( 3 servings/d diets for the maintenance phase. Three hundred thirty eight men and women, age: 40.3 ± 7.0 years and BMI: 34.5 ± 3.1, were randomized; Change in weight and body composition (total fat, trunk fat from 4 to 9 months were the primary outcomes. Blood chemistry, blood pressure, resting metabolism, and respiratory quotient were secondary outcomes. Energy intake, calcium intake, dairy intake, and physical activity were measured as process evaluation. Results During weight maintenance, there were no overall significant differences for weight or body composition between the low and recommended dairy groups. A significant site interaction occurred with the low dairy group at KU maintaining weight and body composition and the low dairy group at UT increasing weight and body fat. The recommended dairy group exhibited reductions in plasma 1,25-(OH2-D while no change was observed in the low dairy group. No other differences were found for blood chemistry, blood pressure or physical activity between low and recommended dairy groups. The recommended dairy group showed significantly greater energy intake and lower respiratory quotient compared to the low dairy group. Conclusion Weight maintenance was similar for low and recommended dairy groups. The recommended dairy group exhibited evidence of greater fat oxidation and was able to consume greater energy without greater weight gain compared to the low dairy group. Recommended levels of dairy products may be used during weight maintenance without contributing to weight gain compared to diets low

  15. Predictors of Weight Loss Maintenance following an Insurance-Sponsored Weight Management Program

    OpenAIRE

    Christiaan G. Abildso; Olivier Schmid; Megan Byrd; Sam Zizzi; Alessandro Quartiroli; Sean J. Fitzpatrick

    2014-01-01

    Intentional weight loss among overweight and obese adults (body mass index ≥ 25 kg/m2) is associated with numerous health benefits, but weight loss maintenance (WLM) following participation in weight management programming has proven to be elusive. Many individuals attempting to lose weight join formal programs, especially women, but these programs vary widely in focus, as do postprogram weight regain results. We surveyed 2,106 former participants in a community-based, insurance-sponsored wei...

  16. Low Birth Weight, Very Low Birth Weight Rates and Gestational Age-Specific Birth Weight Distribution of Korean Newborn Infants

    OpenAIRE

    Shin, Son-Moon; Chang, Young-Pyo; Lee, Eun-Sil; Lee, Young-Ah; Son, Dong-Woo; Kim, Min-Hee; Choi, Young-Ryoon

    2005-01-01

    To obtain the low birth weight (LBW) rate, the very low birth weight (VLBW) rate, and gestational age (GA)-specific birth weight distribution based on a large population in Korea, we collected and analyzed the birth data of 108,486 live births with GA greater than 23 weeks for 1 yr from 1 January to 31 December 2001, from 75 hospitals and clinics located in Korea. These data included birth weight, GA, gender of the infants, delivery type, maternal age, and the presence of multiple pregnancy. ...

  17. Snack Food, Satiety, and Weight.

    Science.gov (United States)

    Njike, Valentine Yanchou; Smith, Teresa M; Shuval, Omree; Shuval, Kerem; Edshteyn, Ingrid; Kalantari, Vahid; Yaroch, Amy L

    2016-09-01

    In today's society, snacking contributes close to one-third of daily energy intake, with many snacks consisting of energy-dense and nutrient-poor foods. Choices made with regard to snacking are affected by a multitude of factors on individual, social, and environmental levels. Social norms, for example, that emphasize healthful eating are likely to increase the intake of nutrient-rich snacks. In addition, satiety, the feeling of fullness that persists after eating, is an important factor in suppressing overconsumption, which can lead to overweight and obesity. Thus, eating snacks between meals has the potential to promote satiety and suppress overconsumption at the subsequent meal. Numerous studies have explored the relation between snack foods and satiety. These studies concluded that whole foods high in protein, fiber, and whole grains (e.g., nuts, yogurt, prunes, and popcorn) enhance satiety when consumed as snacks. Other foods that are processed to include protein, fiber, or complex carbohydrates might also facilitate satiety when consumed as snacks. However, studies that examined the effects of snack foods on obesity did not always account for satiety and the dietary quality and portion size of the snacks consumed. Thus, the evidence concerning the effects of snack foods on obesity has been mixed, with a number of interventional and observational studies not finding a link between snack foods and increased weight status. Although further prospective studies are warranted to conclusively determine the effects of snack foods on obesity risk, the consumption of healthful snacks likely affects satiety and promotes appetite control, which could reduce obesity. © 2016 American Society for Nutrition.

  18. Birth weight ratio as an alternative to birth weight percentile to express infant weight in research and clinical practice: a nationwide cohort study

    NARCIS (Netherlands)

    Voskamp, Bart Jan; Kazemier, Brenda M.; Schuit, Ewoud; Mol, Ben Willem J.; Buimer, Maarten; Pajkrt, Eva; Ganzevoort, Wessel

    2014-01-01

    Objective. To compare birth weight ratio and birth weight percentile to express infant weight when assessing pregnancy outcome. Study Design. We performed a national cohort study. Birth weight ratio was calculated as the observed birth weight divided by the median birth weight for gestational age.

  19. Weighted straight skeletons in the plane.

    Science.gov (United States)

    Biedl, Therese; Held, Martin; Huber, Stefan; Kaaser, Dominik; Palfrader, Peter

    2015-02-01

    We investigate weighted straight skeletons from a geometric, graph-theoretical, and combinatorial point of view. We start with a thorough definition and shed light on some ambiguity issues in the procedural definition. We investigate the geometry, combinatorics, and topology of faces and the roof model, and we discuss in which cases a weighted straight skeleton is connected. Finally, we show that the weighted straight skeleton of even a simple polygon may be non-planar and may contain cycles, and we discuss under which restrictions on the weights and/or the input polygon the weighted straight skeleton still behaves similar to its unweighted counterpart. In particular, we obtain a non-procedural description and a linear-time construction algorithm for the straight skeleton of strictly convex polygons with arbitrary weights.

  20. Benefit of Doubt Approach to Case Weighting

    DEFF Research Database (Denmark)

    Wittrup, Jesper; Bogetoft, Peter

    The implementation of an efficient and reliable case weighting system (CWS) is currently considered essential for running an efficient judiciary. However, traditional models for establishing case weights are time-consuming and expensive. Furthermore, since such case weights are often viewed...... as indications of the relative " importance " of different types of court cases, they are bound to raise controversy. The most elaborate weighting system is likely to have its critics who question whether the established weights are fair. To address these issues, we suggest a new " benefit of the doubt...... between 150 and 250 minutes, or as simple ordinal rankings, e.g., case type B requires more time than case type A. The use of partial weight information and a benefit of the doubt approach reduces the need for detailed time-studies and prolonged " negotiations " among stakeholders. Moreover, most...

  1. Teammates and social influence affect weight loss outcomes in a team-based weight loss competition.

    Science.gov (United States)

    Leahey, Tricia M; Kumar, Rajiv; Weinberg, Brad M; Wing, Rena R

    2012-07-01

    Team-based internet interventions are increasing in popularity as a way of promoting weight loss in large numbers of individuals. Given that social networks influence health behavior change, this study investigated the effects of teammates and social influence on individual weight loss during a team-based weight loss competition. Shape Up Rhode Island (SURI) 2009 was a 12-week online program open to adult residents of Rhode Island. Participants joined with a team and competed with other teams on weight loss and/or physical activity. Overweight/obese (OW/OB) individuals (N = 3,330; 76% female; age = 46.1 ± 10.8; BMI = 31.2 ± 5.3 kg/m(2)), representing 987 teams, completed the weight loss program. Multilevel modeling was used to examine whether weight loss clustered among teammates and whether percentage of teammates in the weight loss division and reported teammate influence on weight loss were associated with individual weight outcomes. OW/OB completers reported losing 4.2 ± 3.4% of initial body weight. Weight loss was similar among teammates (intraclass correlation coefficient (ICC) = 0.10, P social influence for weight loss were associated with greater percent weight loss (P's ≤ 0.002). Similarly, achieving a clinically significant (5%) weight loss tended to cluster within teams (ICC = 0.09; P social influence for weight loss were associated with increased likelihood of achieving a 5% weight loss (odds ratio (OR) = 1.06; OR = 1.20, respectively). These results suggest that teammates affect weight loss outcomes during a team-based intervention. Harnessing and maximizing teammate influence for weight loss may enhance weight outcomes in large-scale team-based programs.

  2. Gestational Weight Gain and its Relation with Birth Weight of the Newborn.

    Science.gov (United States)

    Thapa, Meena; Paneru, Rupa

    2017-01-01

    Gestational weight gain is an important predictor of the health of the newborn. It is affected by body mass index of the women. This study was conducted to find out gestational weight gain according to Institute of Medicine 2009 recommendation and relationship of newborn birth weight to body mass index and gestational weight gain of the women. It was cross sectional, hospital based study. The women, who attended at term pregnancy for delivery and having recorded first trimester body weight, were included in the study. Their body mass index was calculated and they were stratified into 4 groups according to body mass index. The gestational weight gain was calculated by subtracting first trimester body weight from body weight at the time of admission for delivery. All the women were followed till delivery. The newborn birth weight was taken immediately after delivery. A total of 227 women were enrolled in the study. More than half of the women had normal body mass index. There were 84 (37%) overweight and obese women. Mean gestational weight gain was 10.21 kg, and mean weight of the newborn was 3.05 kg. There were equal number of women who had adequate weight gain and less weight gain according to recommendation. Excess weight gain was seen in 34 (15%) women. Women of higher body mass index and women who had gain more weight during pregnancy had larger newborns. Body mass index and gestational weight gain of the women were important predictors of birth weight of the newborn. There is a positive correlation between gestational weight gain of the women and birth weight of the newborn.

  3. Three-year weight change in successful weight losers who lost weight on a low-carbohydrate diet.

    Science.gov (United States)

    Phelan, Suzanne; Wyatt, Holly; Nassery, Shirine; Dibello, Julia; Fava, Joseph L; Hill, James O; Wing, Rena R

    2007-10-01

    The purpose of this study was to evaluate long-term weight loss and eating and exercise behaviors of successful weight losers who lost weight using a low-carbohydrate diet. This study examined 3-year changes in weight, diet, and physical activity in 891 subjects (96 low-carbohydrate dieters and 795 others) who enrolled in the National Weight Control Registry between 1998 and 2001 and reported >or=30-lb weight loss and >or=1 year weight loss maintenance. Only 10.8% of participants reported losing weight after a low-carbohydrate diet. At entry into the study, low-carbohydrate diet users reported consuming more kcal/d (mean +/- SD, 1,895 +/- 452 vs. 1,398 +/- 574); fewer calories in weekly physical activity (1,595 +/- 2,499 vs. 2,542 +/- 2,301); more calories from fat (64.0 +/- 7.9% vs. 30.9 +/- 13.1%), saturated fat (23.8 +/- 4.1 vs. 10.5 +/- 5.2), monounsaturated fat (24.4 +/- 3.7 vs. 11.0 +/- 5.1), and polyunsaturated fat (8.6 +/- 2.7 vs. 5.5 +/- 2.9); and less dietary restraint (10.8 +/- 2.9 vs. 14.9 +/- 3.9) compared with other Registry members. These differences persisted over time. No differences in 3-year weight regain were observed between low-carbohydrate dieters and other Registry members in intent-to-treat analyses (7.0 +/- 7.1 vs. 5.7 +/- 8.7 kg). It is possible to achieve and maintain long-term weight loss using a low-carbohydrate diet. The long-term health effects of weight loss associated with a high-fat diet and low activity level merits further investigation.

  4. Diet in the management of weight loss

    OpenAIRE

    Strychar, Irene

    2006-01-01

    Obesity is an established risk factor for numerous chronic diseases, and successful treatment will have an important impact on medical resources utilization, health care costs, and patient quality of life. With over 60% of our population being overweight, physicians face a major challenge in assisting patients in the process of weight loss and weight-loss maintenance. Low-calorie diets can lower total body weight by an average of 8% in the short term. These diets are well-tolerated and charac...

  5. A nomograph method for assessing body weight.

    Science.gov (United States)

    Thomas, A E; McKay, D A; Cutlip, M B

    1976-03-01

    The ratio of weight/height emerges from varied epidemiological studies as the most generally useful index of relative body mass in adults. The authors present a nomograph to facilitate use of this relationship in clinical situations. While showing the range of weight given as desirable in life insurance studies, the scale expresses relative weight as a continuous variable. This method encourages use of clinical judgment in interpreting "overweight" and "underweight" and in accounting for muscular and skeletal contributions to measured mass.

  6. Molecular weight distribution of Athabasca bitumen

    Energy Technology Data Exchange (ETDEWEB)

    Champagne, P J; Manolakis, E; Ternan, M

    1985-03-01

    A sample of whole Athabasca bitumen has been fractionated by preparative g.p.c. The weights of the fractions have been determined and their molecular weights measured by several methods. In contras to previously published data, consistent results were obtained using different solvents (THF, benzene/water) and using different techniques (v.p.o., f.p.d. and g.c.-m.s.). This has resulted in a accurate definition of the molecular weight distribution of Athabasca bitumen.

  7. Frequency-Weighted Balancing Related Controller Reduction

    OpenAIRE

    Varga, Andras; Anderson, Brian D.O.

    2002-01-01

    The efficient solution of a class of controller approximation problems by using frequency-weighted balancing related model reduction approaches is considered. It is shown that for certain standard performance and stability enforcing frequency-weights, the computation of the frequency-weighted controllability and observability grammians can be done by solving reduced order Lyapunov equations regardless the controller itself is stable or unstable. The new approach can be used in conjunction wit...

  8. Significance of prostatic weight in prostatism

    DEFF Research Database (Denmark)

    Jensen, K M; Bruskewitz, R C; Iversen, P

    1983-01-01

    In addition to routine evaluation, 68 patients with prostatism underwent blinded urodynamic testing prior to transurethral prostatectomy and were reexamined symptomatologically and urodynamically at 3 and 12 months after surgery to determine if prostatic weight could predict postoperative outcome....... Resected prostatic weight correlated with estimated weight at cystoscopy and with obstructive symptoms, but not with urodynamic variables of infravesical obstruction. Patients with small prostates improved symptomatologically to the same degree as patients with larger glands, although they did not improve...... to the same degree urodynamically. Prostatic weight, therefore, could not be used to predict the outcome of transurethral surgery....

  9. Weight loss and bone mineral density.

    Science.gov (United States)

    Hunter, Gary R; Plaisance, Eric P; Fisher, Gordon

    2014-10-01

    Despite evidence that energy deficit produces multiple physiological and metabolic benefits, clinicians are often reluctant to prescribe weight loss in older individuals or those with low bone mineral density (BMD), fearing BMD will be decreased. Confusion exists concerning the effects that weight loss has on bone health. Bone density is more closely associated with lean mass than total body mass and fat mass. Although rapid or large weight loss is often associated with loss of bone density, slower or smaller weight loss is much less apt to adversely affect BMD, especially when it is accompanied with high intensity resistance and/or impact loading training. Maintenance of calcium and vitamin D intake seems to positively affect BMD during weight loss. Although dual energy X-ray absorptiometry is normally used to evaluate bone density, it may overestimate BMD loss following massive weight loss. Volumetric quantitative computed tomography may be more accurate for tracking bone density changes following large weight loss. Moderate weight loss does not necessarily compromise bone health, especially when exercise training is involved. Training strategies that include heavy resistance training and high impact loading that occur with jump training may be especially productive in maintaining, or even increasing bone density with weight loss.

  10. Impact of carbohydrates on weight regain.

    Science.gov (United States)

    Bosy-Westphal, Anja; Müller, Manfred J

    2015-07-01

    Research on obesity treatment has shifted its focus from weight loss to weight-loss maintenance strategies. The conventional approach of a low-fat diet is challenged by insights from glycemic effects of carbohydrates on body weight regulation. Metabolic and endocrine adaptations to weight loss that contribute to weight regain involve reduced energy expenditure, increased insulin sensitivity, and enhanced orexigenic signals. This review summarizes the impact of carbohydrates on energetic efficiency, partitioning of weight regain as fat and lean mass, and appetite control. Both the amount and frequency of postprandial glycemia add to body weight regulation after weight loss and strengthen the concept of glycemic index and glycemic load. In addition, dietary fiber and slowly or poorly absorbable functional sugars modify gastrointestinal peptides involved in appetite and metabolic regulation and exert prebiotic effects. Current evidence suggests that a low-glycemic load diet with a preference for low-glycemic index foods and integration of slowly digestible, poorly absorbable carbohydrates may improve weight-loss maintenance. Future studies should investigate the health benefits of low glycemic functional sweeteners (e.g., isomaltulose and tagatose).

  11. Women's challenges with postpartum weight loss.

    Science.gov (United States)

    Montgomery, Kristen S; Bushee, Tracy D; Phillips, Jennifer D; Kirkpatrick, Terrie; Catledge, Courtney; Braveboy, Kristin; O'Rourke, Carol; Patel, Neema; Prophet, Malshundria; Cooper, Anita; Mosley, Lori; Parker, Christie; Douglas, Gaye M

    2011-11-01

    This study was designed to examine women's experiences of weight loss during the postpartum period. Understanding women's positive and negative experiences can assist health care providers to successfully intervene in helping women lose weight following pregnancy and avoid long-term weight gain and obesity development. Phenomenology, according to Husserl's perspective. Private location of the women's choosing. Twenty-six women, who ranged in age from 25 to 35 years, and had given birth within the last 5 years, were interviewed regarding their experiences with postpartum weight loss. The majority of the sample was Caucasian. Interviews were transcribed and themes were identified from each of the interviews. Comparisons were made between interviews to identify common experiences between women. Data were analyzed according to the Giorgi method. The women in the study had a wide range of experiences. Themes that emerged from the interviews related to women's challenges with return to prepregnancy weight. These included: time and motivation issues, the need for support, and weight and other struggles. This study provides a look inside the lives of women faced with the reality of losing weight after childbirth. Losing weight after delivery is multi-faceted and influenced by many factors. Interventions to assist women with weight loss should target the challenges described in this paper. When effective strategies are developed, education can be done during pregnancy to prepare for the postpartum period. Ultimately, future research efforts can help us to eliminate pregnancy as a risk factor for obesity in women.

  12. A Weighted Configuration Model and Inhomogeneous Epidemics

    Science.gov (United States)

    Britton, Tom; Deijfen, Maria; Liljeros, Fredrik

    2011-12-01

    A random graph model with prescribed degree distribution and degree dependent edge weights is introduced. Each vertex is independently equipped with a random number of half-edges and each half-edge is assigned an integer valued weight according to a distribution that is allowed to depend on the degree of its vertex. Half-edges with the same weight are then paired randomly to create edges. An expression for the threshold for the appearance of a giant component in the resulting graph is derived using results on multi-type branching processes. The same technique also gives an expression for the basic reproduction number for an epidemic on the graph where the probability that a certain edge is used for transmission is a function of the edge weight (reflecting how closely `connected' the corresponding vertices are). It is demonstrated that, if vertices with large degree tend to have large (small) weights on their edges and if the transmission probability increases with the edge weight, then it is easier (harder) for the epidemic to take off compared to a randomized epidemic with the same degree and weight distribution. A recipe for calculating the probability of a large outbreak in the epidemic and the size of such an outbreak is also given. Finally, the model is fitted to three empirical weighted networks of importance for the spread of contagious diseases and it is shown that R 0 can be substantially over- or underestimated if the correlation between degree and weight is not taken into account.

  13. Efficacy of a "small-changes" workplace weight loss initiative on weight and productivity outcomes.

    Science.gov (United States)

    Zinn, Caryn; Schofield, Grant M; Hopkins, Will G

    2012-10-01

    The effect of weight reduction on workplace productivity is unknown. We have investigated a "small-changes" workplace weight loss intervention on weight and productivity outcomes. Overweight/obese employees at two New Zealand worksites (n = 102) received the 12-week intervention. One site received an extra 9-month weight-maintenance component. Magnitudes of effects on weight and productivity were assessed via standardization. Both groups reduced weight at 12 weeks and maintained lost weight at 12 months. There were small possible improvements in productivity at one worksite and trivial reductions at the other by 12 weeks, with little subsequent change during maintenance in either group. At an individual level, weight change was associated with at most only small improvements or small reductions in productivity. Workplace weight loss initiatives may need to be more intensive or multidimensional to enhance productivity.

  14. Longitudinal Analysis of Leptin Variation during Weight Regain after Weight Loss in Obese Children

    DEFF Research Database (Denmark)

    Holm, Jens-Christian; Gamborg, Michael; Ward, Leigh

    2009-01-01

    Objective: This study assessed if lower than predicted serum leptin concentrations seen during weight loss persisted during weight regain, with possible implications for weight control. Methods: 115 children were investigated during a 12-week weight loss program. 90 children completed the program....... Results: Children with the greatest increases in BMI standard deviation score (SDS) exhibited the largest leptin increments. The disproportionate reduction of leptin seen during weight loss recovered after weight loss. Leptin increases mirrored increases in BMI SDS during weight regain, and the leptin......-BMI SDS relationship seen during follow-up resembled the baseline leptin-BMI SDS relationship. Conclusion: Proportional increases of leptin and BMI SDS during weight regain suggests an intact leptin response during re-accumulation of fat. Following the pronounced reduction of leptin during weight loss...

  15. WeightLifter: Visual Weight Space Exploration for Multi-Criteria Decision Making.

    Science.gov (United States)

    Pajer, Stephan; Streit, Marc; Torsney-Weir, Thomas; Spechtenhauser, Florian; Muller, Torsten; Piringer, Harald

    2017-01-01

    A common strategy in Multi-Criteria Decision Making (MCDM) is to rank alternative solutions by weighted summary scores. Weights, however, are often abstract to the decision maker and can only be set by vague intuition. While previous work supports a point-wise exploration of weight spaces, we argue that MCDM can benefit from a regional and global visual analysis of weight spaces. Our main contribution is WeightLifter, a novel interactive visualization technique for weight-based MCDM that facilitates the exploration of weight spaces with up to ten criteria. Our technique enables users to better understand the sensitivity of a decision to changes of weights, to efficiently localize weight regions where a given solution ranks high, and to filter out solutions which do not rank high enough for any plausible combination of weights. We provide a comprehensive requirement analysis for weight-based MCDM and describe an interactive workflow that meets these requirements. For evaluation, we describe a usage scenario of WeightLifter in automotive engineering and report qualitative feedback from users of a deployed version as well as preliminary feedback from decision makers in multiple domains. This feedback confirms that WeightLifter increases both the efficiency of weight-based MCDM and the awareness of uncertainty in the ultimate decisions.

  16. Prepregnancy body mass index, gestational weight gain, and birth weight in the BRISA cohort.

    Science.gov (United States)

    Lima, Raina Jansen Cutrim Propp; Batista, Rosângela Fernandes Lucena; Ribeiro, Marizélia Rodrigues Costa; Ribeiro, Cecília Cláudia Costa; Simões, Vanda Maria Ferreira; Lima Neto, Pedro Martins; Silva, Antônio Augusto Moura da; Bettiol, Heloisa

    2018-01-01

    OBJECTIVE To analyze the effects of maternal pre-pregnancy body mass index and weight gain during pregnancy on the baby's birth weight. METHODS We conducted a cross-sectional study with 5,024 mothers and their newborns using a Brazilian birth cohort study. In the proposed model, estimated by structural equation modeling, we tested socioeconomic status, age, marital status, pre-pregnancy body mass index, smoking habit and alcohol consumption during pregnancy, hypertension and gestational diabetes, gestational weight gain, and type of delivery as determinants of the baby's birth weight. RESULTS For a gain of 4 kg/m2 (1 Standard Deviation [SD]) in pre-pregnancy body mass index, there was a 0.126 SD increase in birth weight, corresponding to 68 grams (p gestational weight gain represented a 0.280 SD increase in newborn weight, correponding to 151.2 grams (p weight was direct (standardized coefficient [SC] = 0.202; p weight gain during pregnancy (SC = -0.070, p weight gain during pregnany on birth weight was predominantly direct (SC = 0.269, p gained less weight during pregnancy (p gestational weight gain on the increase in birth weight was greater than that of pre-pregnancy body mass index.

  17. Postpartum Maternal Weight Changes: Implications for Military Women

    National Research Council Canada - National Science Library

    Abrams, Barbara

    2002-01-01

    .... Multivariate analysis suggested that high level of maternal weight gain during pregnancy, history of weight cycling, postpartum depression, and financial insecurity were associated with increased weight after birth...

  18. Prevalence of overweight misperception and weight control behaviors among normal weight adolescents in the United States

    Directory of Open Access Journals (Sweden)

    Kathleen S. Talamayan

    2006-01-01

    Full Text Available Weight perceptions and weight control behaviors have been documented with underweight and overweight adolescents, yet limited information is available on normal weight adolescents. This study investigates the prevalence of overweight misperceptions and weight control behaviors among normal weight adolescents in the U.S. by sociodemographic and geographic characteristics. We examined data from the 2003 Youth Risk Behavior Survey (YRBS. A total of 9,714 normal weight U.S. high school students were included in this study. Outcome measures included self-reported height and weight measurements, overweight misperceptions, and weight control behaviors. Weighted prevalence estimates and odds ratios were computed. There were 16.2% of normal weight students who perceived themselves as overweight. Females (25.3% were more likely to perceive themselves as overweight than males (6.7% (p < 0.05. Misperceptions of overweight were highest among white (18.3% and Hispanic students (15.2% and lowest among black students (5.8%. Females (16.8% outnumbered males (6.8% in practicing at least one unhealthy weight control behavior (use of diet pills, laxatives, and fasting in the past 30 days. The percentage of students who practiced at least one weight control behavior was similar by ethnicity. There were no significant differences in overweight misperception and weight control behaviors by grade level, geographic region, or metropolitan status. A significant portion of normal weight adolescents misperceive themselves as overweight and are engaging in unhealthy weight control behaviors. These data suggest that obesity prevention programs should address weight misperceptions and the harmful effects of unhealthy weight control methods even among normal weight adolescents.

  19. Expert Coaching in Weight Loss: Retrospective Analysis.

    Science.gov (United States)

    Painter, Stefanie Lynn; Ahmed, Rezwan; Kushner, Robert F; Hill, James O; Lindquist, Richard; Brunning, Scott; Margulies, Amy

    2018-03-13

    Providing coaches as part of a weight management program is a common practice to increase participant engagement and weight loss success. Understanding coach and participant interactions and how these interactions impact weight loss success needs to be further explored for coaching best practices. The purpose of this study was to analyze the coach and participant interaction in a 6-month weight loss intervention administered by Retrofit, a personalized weight management and Web-based disease prevention solution. The study specifically examined the association between different methods of coach-participant interaction and weight loss and tried to understand the level of coaching impact on weight loss outcome. A retrospective analysis was performed using 1432 participants enrolled from 2011 to 2016 in the Retrofit weight loss program. Participants were males and females aged 18 years or older with a baseline body mass index of ≥25 kg/m², who also provided at least one weight measurement beyond baseline. First, a detailed analysis of different coach-participant interaction was performed using both intent-to-treat and completer populations. Next, a multiple regression analysis was performed using all measures associated with coach-participant interactions involving expert coaching sessions, live weekly expert-led Web-based classes, and electronic messaging and feedback. Finally, 3 significant predictors (Pcoaching session attendance (Pcoaching sessions, attending 60% of live weekly Web-based classes, and receiving a minimum of 1 food log feedback day per week were associated with clinically significant weight loss. Participant's one-on-one expert coaching session attendance, live weekly expert-led interactive Web-based class attendance, and the number of food log feedback days per week from expert coach were significant predictors of weight loss in a 6-month intervention. ©Stefanie Lynn Painter, Rezwan Ahmed, Robert F Kushner, James O Hill, Richard Lindquist, Scott

  20. Weight-based discrimination: an ubiquitary phenomenon?

    Science.gov (United States)

    Sikorski, C; Spahlholz, J; Hartlev, M; Riedel-Heller, S G

    2016-02-01

    Despite strong indications of a high prevalence of weight-related stigmatization in individuals with obesity, limited attention has been given to the role of weight discrimination in examining the stigma obesity. Studies, up to date, rely on a limited basis of data sets and additional studies are needed to confirm the findings of previous studies. In particular, data for Europe are lacking, and are needed in light of a recent ruling of the European Court of Justice that addressed weight-based discrimination. The data were derived from a large representative telephone survey in Germany (n=3003). The dependent variable, weight-based discrimination, was assessed with a one-item question. The lifetime prevalence of weight discrimination across different sociodemographic variables was determined. Logistic regression models were used to assess the association of independent and dependent variables. A sub-group analysis was conducted analyzing all participants with a body mass index ⩾25 kg m(-)(2). The overall prevalence of weight-based discrimination was 7.3%. Large differences, however, were observed regarding weight status. In normal weight and overweight participants the prevalence was 5.6%, but this number doubled in participants with obesity class I (10.2%), and quadrupled in participants with obesity class II (18.7%) and underweight (19.7%). In participants with obesity class III, every third participant reported accounts of weight-based discrimination (38%). In regression models, after adjustment, the associations of weight status and female gender (odds ratio: 2.59, PDiscrimination seems to be an ubiquitary phenomenon at least for some groups that are at special risk, such as heavier individuals and women. Our findings therefore emphasize the need for research and intervention on weight discrimination among adults with obesity, including anti-discrimination legislation.

  1. Expert Coaching in Weight Loss: Retrospective Analysis

    Science.gov (United States)

    Kushner, Robert F; Hill, James O; Lindquist, Richard; Brunning, Scott; Margulies, Amy

    2018-01-01

    Background Providing coaches as part of a weight management program is a common practice to increase participant engagement and weight loss success. Understanding coach and participant interactions and how these interactions impact weight loss success needs to be further explored for coaching best practices. Objective The purpose of this study was to analyze the coach and participant interaction in a 6-month weight loss intervention administered by Retrofit, a personalized weight management and Web-based disease prevention solution. The study specifically examined the association between different methods of coach-participant interaction and weight loss and tried to understand the level of coaching impact on weight loss outcome. Methods A retrospective analysis was performed using 1432 participants enrolled from 2011 to 2016 in the Retrofit weight loss program. Participants were males and females aged 18 years or older with a baseline body mass index of ≥25 kg/m², who also provided at least one weight measurement beyond baseline. First, a detailed analysis of different coach-participant interaction was performed using both intent-to-treat and completer populations. Next, a multiple regression analysis was performed using all measures associated with coach-participant interactions involving expert coaching sessions, live weekly expert-led Web-based classes, and electronic messaging and feedback. Finally, 3 significant predictors (Pcoaching session attendance (Pcoaching sessions, attending 60% of live weekly Web-based classes, and receiving a minimum of 1 food log feedback day per week were associated with clinically significant weight loss. Conclusions Participant’s one-on-one expert coaching session attendance, live weekly expert-led interactive Web-based class attendance, and the number of food log feedback days per week from expert coach were significant predictors of weight loss in a 6-month intervention. PMID:29535082

  2. Changes in weight control behaviors and hedonic hunger during a 12-week commercial weight loss program.

    Science.gov (United States)

    O'Neil, Patrick M; Theim, Kelly R; Boeka, Abbe; Johnson, Gail; Miller-Kovach, Karen

    2012-12-01

    Greater use of key self-regulatory behaviors (e.g., self-monitoring of food intake and weight) is associated with greater weight loss within behavioral weight loss treatments, although this association is less established within widely-available commercial weight loss programs. Further, high hedonic hunger (i.e., susceptibility to environmental food cues) may present a barrier to successful behavior change and weight loss, although this has not yet been examined. Adult men and women (N=111, body mass index M±SD=31.5±2.7kg/m(2)) were assessed before and after participating in a 12-week commercial weight loss program. From pre- to post-treatment, reported usage of weight control behaviors improved and hedonic hunger decreased, and these changes were inversely associated. A decrease in hedonic hunger was associated with better weight loss. An improvement in reported weight control behaviors (e.g., self-regulatory behaviors) was associated with better weight loss, and this association was even stronger among individuals with high baseline hedonic hunger. Findings highlight the importance of specific self-regulatory behaviors within weight loss treatment, including a commercial weight loss program developed for widespread community implementation. Assessment of weight control behavioral skills usage and hedonic hunger may be useful to further identify mediators of weight loss within commercial weight loss programs. Future interventions might specifically target high hedonic hunger and prospectively examine changes in hedonic hunger during other types of weight loss treatment to inform its potential impact on sustained behavior change and weight control. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Associations of body weight perception and weight control behaviors with problematic internet use among Korean adolescents.

    Science.gov (United States)

    Park, Subin; Lee, Yeeun

    2017-05-01

    We examined the association of body mass index (BMI), body weight perception, and weight control behaviors with problematic Internet use in a nationwide sample of Korean adolescents. Cross-sectional data from the 2010 Korean Youth Risk Behavior Web-based Survey collected from 37,041 boys and 33,655 girls in middle- and high- schools (grades 7-12) were analyzed. Participants were classified into groups based on BMI (underweight, normal weight, overweight, and obese), body weight perception (underweight, normal weight, and overweight), and weight control behavior (no weight control behavior, appropriate weight control behavior, inappropriate weight control behavior). The risk of problematic Internet use was assessed with the Korean Internet Addiction Proneness Scale for Youth-Short Form. Both boys and girls with inappropriate weight control behavior were more likely to have problematic Internet use. Underweight, overweight, and obese boys and girls were more likely to have problematic Internet use. For both boys and girls, subjective perception of underweight and overweight were positively associated with problematic Internet use. Given the negative effect of inappropriate weight control behavior, special attention needs to be given to adolescents' inappropriate weight control behavior, and an educational intervention for adolescents to control their weight in healthy ways is needed. Copyright © 2017. Published by Elsevier B.V.

  4. Using personality as a predictor of diet induced weight loss and weight management

    Directory of Open Access Journals (Sweden)

    Munro Irene A

    2011-11-01

    Full Text Available Abstract Background A major challenge for successful weight management is tailoring weight loss programs to individual needs. The aim of this study was to investigate whether personality traits could be used to match individuals to a compatible weight loss program that would maximize weight loss. Method Two different weight loss trials were conducted, both with a weight loss greater than 5% the measure of success. Fifty-four individuals, BMI 30-40 kg/m2, either followed a slow, healthy eating weight loss diet (HEWLD of 5000-6000 kJ/day for 12 weeks (n = 22, or a fast, very low energy diet (VLED of 3000 kJ/day for 4 weeks (n = 32. Anthropometric measurements were recorded at baseline, at the end of the weight loss period and, for VLED, at the end of 10 weeks of weight maintenance. Personality traits were measured at baseline using the Tangney Self Control Scale plus 3 of the scales from the Five Factor Model - Neuroticism, Conscientiousness and Extraversion. Results The percentage weight loss was significantly greater in VLED (-7.38% compared to HEWLD (-4.11%, (p Conclusion The personality factor, Neuroticism, was linked to successful weight loss (that is ≥ 5% with a particular weight loss treatment, suggesting that there is a potential to use measures of personality to identify appropriate weight loss/management strategies for individuals. Trial registration Australia and New Zealand Clinical Trials Register (ANZCTR: ACTRN12611000716965

  5. Maternal concern about child weight in a study of weight-discordant siblings.

    Science.gov (United States)

    Kral, Tanja V E; Moore, Reneé H; Compher, Charlene W

    2015-01-01

    This study examined concern about child weight in mothers of weight-discordant siblings and determined the accuracy of maternal self-report versus measured child height, weight, and corresponding body mass index (BMI; kg/m(2) ) z-score. Discordant sibling design. Forty-seven mothers of 5- to 12-year-old, weight-discordant siblings. Mothers self-reported their concern about child weight for each child separately and for a subset of children, self-reported their heights and weights. Siblings' height, weight, waist circumference, and adiposity were measured. The majority (83%) of mothers expressed concern about their overweight/obese child's weight and 20% of mothers expressed concern about their normal-weight child's weight (p concern about child weight were positively associated with difference scores in sibling BMI z-score (r = 0.42; p = .01) and percent body fat (r = 0.56; p concern for their overweight/obese child's weight was greater for sibling pairs who were more discordant in their weight. © 2014 Wiley Periodicals, Inc.

  6. 7 CFR 51.1863 - Standard weight.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... net weight of 15 pounds (6.80 kg) or more, the net weight of the contents shall not be less than the...

  7. Weight Loss: Ready to Change Your Habits?

    Science.gov (United States)

    ... calories more than you consume each day — through diet and exercise. You might lose weight more quickly if you ... yourself with regular weigh-ins and tracking your diet and activity, which is ... don't have a positive attitude about losing weight, you might not be ready — ...

  8. Application of hyperplane arrangements to weight enumeration

    NARCIS (Netherlands)

    Jurrius, R.P.M.J.; Pellikaan, G.R.

    2014-01-01

    Many research in coding theory is focussed on linear error-correcting codes. Since these codes are subspaces, linear algebra plays a prominent role in studying them. An important polynomial invariant of linear error-correcting codes is the (extended) weight enumerator. The weight enumerator gives

  9. Understanding weight stigmatization: a focus group study.

    Science.gov (United States)

    Cossrow, N H; Jeffery, R W; McGuire, M T

    2001-01-01

    The purpose of this research was to investigate, in a nonclinical sample of adults, thoughts on and experiences with weight stigmatization. Focus groups were used to collect information. Participants were recruited through a newspaper advertisement and flyers posted in public places in Minneapolis and St. Paul. During the focus groups, participants were led in a discussion about their thoughts on weight stigmatization and personal experiences of being treated differently or poorly because of their weight. Six gender-specific focus groups consisted of 31 adult volunteers (17 women and 14 men). Perceptions of weight-based stereotypes and weight stigmatization and personal reports of having been treated differently or poorly owing to weight were measured. Participants reported a variety of experiences of being treated differently or poorly because of their weight. These included teasing, harassment, slurs and insults, negative judgments and assumptions, and perceived discrimination. Participants reported that such experiences occurred at home, among friends and strangers, at work, and in health care settings. Women reported a greater number and a greater variety of negative experiences than men. The results indicated that participants experienced weight-based stigmatization in many aspects of their lives. Awareness of these experiences may assist in the development of treatments for overweight individuals.

  10. A model of objective weighting for EIA.

    Science.gov (United States)

    Ying, L G; Liu, Y C

    1995-06-01

    In spite of progress achieved in the research of environmental impact assessment (EIA), the problem of weight distribution for a set of parameters has not as yet, been properly solved. This paper presents an approach of objective weighting by using a procedure of P ij principal component-factor analysis (P ij PCFA), which suits specifically those parameters measured directly by physical scales. The P ij PCFA weighting procedure reforms the conventional weighting practice in two aspects: first, the expert subjective judgment is replaced by the standardized measure P ij as the original input of weight processing and, secondly, the principal component-factor analysis is introduced to approach the environmental parameters for their respective contributions to the totality of the regional ecosystem. Not only is the P ij PCFA weighting logical in theoretical reasoning, it also suits practically all levels of professional routines in natural environmental assessment and impact analysis. Having been assured of objectivity and accuracy in the EIA case study of the Chuansha County in Shanghai, China, the P ij PCFA weighting procedure has the potential to be applied in other geographical fields that need assigning weights to parameters that are measured by physical scales.

  11. Atomic weight versus atomic mass controversy

    International Nuclear Information System (INIS)

    Holden, N.E.

    1985-01-01

    A problem for the Atomic Weights Commission for the past decade has been the controversial battle over the names ''atomic weight'' and ''atomic mass''. The Commission has considered the arguments on both sides over the years and it appears that this meeting will see more of the same discussion taking place. In this paper, I review the situation and offer some alternatives

  12. Random walk term weighting for information retrieval

    DEFF Research Database (Denmark)

    Blanco, R.; Lioma, Christina

    2007-01-01

    We present a way of estimating term weights for Information Retrieval (IR), using term co-occurrence as a measure of dependency between terms.We use the random walk graph-based ranking algorithm on a graph that encodes terms and co-occurrence dependencies in text, from which we derive term weights...

  13. Decidability and Expressiveness of Recursive Weighted Logic

    DEFF Research Database (Denmark)

    Xue, Bingtian; Larsen, Kim Guldstrand; Mardare, Radu Iulian

    2014-01-01

    Labelled weighted transition systems (LWSs) are transition systems labelled with actions and real numbers. The numbers represent the costs of the corresponding actions in terms of resources. RecursiveWeighted Logic (RWL) is a multimodal logic that expresses qualitative and quantitative properties...

  14. Decoding suprathreshold stochastic resonance with optimal weights

    International Nuclear Information System (INIS)

    Xu, Liyan; Vladusich, Tony; Duan, Fabing; Gunn, Lachlan J.; Abbott, Derek; McDonnell, Mark D.

    2015-01-01

    We investigate an array of stochastic quantizers for converting an analog input signal into a discrete output in the context of suprathreshold stochastic resonance. A new optimal weighted decoding is considered for different threshold level distributions. We show that for particular noise levels and choices of the threshold levels optimally weighting the quantizer responses provides a reduced mean square error in comparison with the original unweighted array. However, there are also many parameter regions where the original array provides near optimal performance, and when this occurs, it offers a much simpler approach than optimally weighting each quantizer's response. - Highlights: • A weighted summing array of independently noisy binary comparators is investigated. • We present an optimal linearly weighted decoding scheme for combining the comparator responses. • We solve for the optimal weights by applying least squares regression to simulated data. • We find that the MSE distortion of weighting before summation is superior to unweighted summation of comparator responses. • For some parameter regions, the decrease in MSE distortion due to weighting is negligible

  15. Skew-signings of positive weighted digraphs

    Directory of Open Access Journals (Sweden)

    Kawtar Attas

    2018-07-01

    Full Text Available An arc-weighted digraph is a pair (D , ω where D is a digraph and ω is an arc-weight function that assigns to each arc u v of D a nonzero real number ω (u v . Given an arc-weighted digraph (D , ω with vertices v 1 , … , v n , the weighted adjacency matrix of (D , ω is defined as the n × n matrix A (D , ω = [ a i j ] where a i j = ω ( v i v j if v i v j is an arc of D , and 0 otherwise. Let (D , ω be a positive arc-weighted digraph and assume that D is loopless and symmetric. A skew-signing of (D , ω is an arc-weight function ω ′ such that ω ′ (u v = ± ω (u v and ω ′ (u v ω ′ (v u < 0 for every arc u v of D . In this paper, we give necessary and sufficient conditions under which the characteristic polynomial of A (D , ω ′ is the same for all skew-signings ω ′ of (D , ω . Our main theorem generalizes a result of Cavers et al. (2012 about skew-adjacency matrices of graphs. Keywords: Arc-weighted digraphs, Skew-signing of a digraph, Weighted adjacency matrix, Mathematics Subject Classification: 05C22, 05C31, 05C50

  16. Identifying the weights in exchange market pressure

    NARCIS (Netherlands)

    Klaassen, F.

    2011-01-01

    Exchange market pressure (EMP) measures the pressure on a currency to depreciate. It adds to the actual depreciation a weighted combination of policy instruments used to ward off depreciation, such as interest rates and foreign exchange interventions, where the weights are their effectiveness. The

  17. Weight Loss Five Years After Behavioral Treatment.

    Science.gov (United States)

    Levitz, Leonard S.; And Others

    The behaviorally-based weight control program conducted by Levitz and Jordan at the University of Pennsylvania and the Institute for Behavioral Education is tailored to patient needs and includes stimulus control, cognitive restructuring, and nutrition education. The success of patients in maintaining the clinically meaningful weight losses…

  18. Quick Tips for Weight Training Exercise

    Science.gov (United States)

    Perez, Saul

    2004-01-01

    Weight training is one of the single most popular types of fitness activities in the United States. One of the reasons for its popularity is that it dramatically contributes to improved strength, muscle tone, body composition, health and appearance. Weight training is a progressive resistance exercise in which resistance is gradually increased as…

  19. Iterative methods for weighted least-squares

    Energy Technology Data Exchange (ETDEWEB)

    Bobrovnikova, E.Y.; Vavasis, S.A. [Cornell Univ., Ithaca, NY (United States)

    1996-12-31

    A weighted least-squares problem with a very ill-conditioned weight matrix arises in many applications. Because of round-off errors, the standard conjugate gradient method for solving this system does not give the correct answer even after n iterations. In this paper we propose an iterative algorithm based on a new type of reorthogonalization that converges to the solution.

  20. Cesarean deliveries and maternal weight retention.

    Science.gov (United States)

    Kapinos, Kandice A; Yakusheva, Olga; Weiss, Marianne

    2017-10-04

    Cesarean delivery accounts for nearly one-third of all births in the U.S. and contributes to an additional $38 billion in healthcare costs each year. Although Cesarean delivery has a long record of improving maternal and neonatal mortality and morbidity, increased utilization over time has yielded public health concerns and calls for reductions. Observational evidence suggests Cesarean delivery is associated with increased maternal postpartum weight, which may have significant implications for the obesity epidemic. Previous literature, however, typically does not address selection biases stemming from correlations of pre-pregnancy weight and reproductive health with Cesarean delivery. We used fetal malpresentation as a natural experiment as it predicts Cesarean delivery but is uncorrelated with pre-pregnancy weight or maternal health. We used hospital administrative data (including fields used in vital birth record) from the state of Wisconsin from 2006 to 2013 to create a sample of mothers with at least two births. Using propensity score methods, we compared maternal weight prior to the second pregnancy of mothers who delivered via Cesarean due to fetal malpresentation to mothers who deliver vaginally. We found no evidence that Cesarean delivery in the first pregnancy causally leads to greater maternal weight, BMI, or movement to a higher BMI classification prior to the second pregnancy. After accounting for correlations between pre-pregnancy weight, gestational weight gain, and mode of delivery, there is no evidence of a causal link between Cesarean delivery and maternal weight retention.

  1. Association of Timing of Weight Gain in Pregnancy With Infant Birth Weight.

    Science.gov (United States)

    Retnakaran, Ravi; Wen, Shi Wu; Tan, Hongzhuan; Zhou, Shujin; Ye, Chang; Shen, Minxue; Smith, Graeme N; Walker, Mark C

    2018-02-01

    Gestational weight gain is a determinant of infant birth weight, but it is unclear whether its timing in pregnancy may hold implications in this regard. Previous studies have yielded conflicting findings on the association of maternal weight gain in early pregnancy with birth weight. However, as these studies have typically recruited women during the first trimester, they are inherently limited by a reliance on self-reported pregravid weight. To evaluate the associations of directly measured maternal pregravid weight and the timing of subsequent weight gain across pregnancy with infant birth weight. In this prospective, preconception, observational cohort study, 1164 newly married women in Liuyang, China, underwent pregravid evaluation at a median of 19.9 weeks before a singleton pregnancy during which they underwent serial weight measurements. The study was conducted from February 1, 2009, to November 4, 2015. Data analysis was performed between September 1, 2016, and May 6, 2017. Maternal weight gain was calculated for the following 10 gestational intervals: from pregravid to less than 14, 14 to 18, 19 to 23, 24 to 28, 29 to 30, 31 to 32, 33 to 34, 35 to 36, 37 to 38, and 39 to 40 weeks. Associations of pregravid weight and weight gain within each of the 10 gestational intervals with the outcome of infant birth weight. The mean (SD) age of the 1164 women included in the study was 25.3 (3.1) years. Pregravid weight was consistently associated with infant birth weight. However, among the 10 gestational intervals, only weight gain from pregravid to 14 weeks and from 14 to 18 weeks was associated with birth weight. Birth weight increased by 13.6 g/kg (95% CI, 3.2-24.1 g/kg) of maternal weight gain from pregravid to 14 weeks and by 26.1 g/kg (95% CI, 3.8-48.4 g/kg) of maternal weight gain from 14 to 18 weeks. Maternal weight only in the first half of gestation is a determinant of infant birth weight. Before pregnancy and early gestation may be a critical window for

  2. Interventions to reduce weight gain in schizophrenia.

    Science.gov (United States)

    Faulkner, G; Cohn, T; Remington, G

    2007-01-24

    Weight gain is common for people with schizophrenia and this has serious implications for health and well being. To determine the effects of both pharmacological (excluding medication switching) and non pharmacological strategies for reducing or preventing weight gain in people with schizophrenia. We searched key databases and the Cochrane Schizophrenia Group's trials register (April 2006), reference sections within relevant papers, hand searched key journals, and contacted the first author of each relevant study and other experts to collect further information. We included all clinical randomised controlled trials comparing any pharmacological or non pharmacological intervention for weight gain (diet and exercise counselling) with standard care or other treatments for people with schizophrenia or schizophrenia-like illnesses. We reliably selected, quality assessed and extracted data from studies. As weight is a continuous outcome measurement, weighted mean differences (WMD) of the change from baseline were calculated. The primary outcome measure was weight loss. Twenty-three randomised controlled trials met the inclusion criteria for this review. Five trials assessed a cognitive/behavioural intervention and eighteen assessed a pharmacological adjunct. In terms of prevention, two cognitive/behavioural trials showed significant treatment effect (mean weight change) at end of treatment (n=104, 2 RCTs, WMD -3.38 kg CI -4.2 to -2.0). Pharmacological adjunct treatments were significant with a modest prevention of weight gain (n=274, 6 RCTs, WMD - 1.16 kg CI -1.9 to -0.4). In terms of treatments for weight loss, we found significantly greater weight reduction in the cognitive behavioural intervention group (n=129, 3 RCTs, WMD -1.69 kg CI -2.8 to -0.6) compared with standard care. Modest weight loss can be achieved with selective pharmacological and non pharmacological interventions. However, interpretation is limited by the small number of studies, small sample size

  3. Interventions to reduce weight gain in schizophrenia

    Science.gov (United States)

    Faulkner, Guy; Cohn, Tony; Remington, Gary

    2014-01-01

    Background Weight gain is common for people with schizophrenia and this has serious implications for health and well being. Objectives To determine the effects of both pharmacological (excluding medication switching) and non pharmacological strategies for reducing or preventing weight gain in people with schizophrenia. Search methods We searched key databases and the Cochrane Schizophrenia Group’s trials register (April 2006), reference sections within relevant papers, hand searched key journals, and contacted the first author of each relevant study and other experts to collect further information. Selection criteria We included all clinical randomised controlled trials comparing any pharmacological or non pharmacological intervention for weight gain (diet and exercise counselling) with standard care or other treatments for people with schizophrenia or schizophrenia-like illnesses. Data collection and analysis We reliably selected, quality assessed and extracted data from studies. As weight is a continuous outcome measurement, weighted mean differences (WMD) of the change from baseline were calculated. The primary outcome measure was weight loss. Main results Twenty-three randomised controlled trials met the inclusion criteria for this review. Five trials assessed a cognitive/behavioural intervention and eighteen assessed a pharmacological adjunct. In terms of prevention, two cognitive/behavioural trials showed significant treatment effect (mean weight change) at end of treatment (n=104, 2 RCTs, WMD −3.38 kg CI −4.2 to −2.0). Pharmacological adjunct treatments were significant with a modest prevention of weight gain (n=274, 6 RCTs, WMD − 1.16 kg CI −1.9 to −0.4). In terms of treatments for weight loss, we found significantly greater weight reduction in the cognitive behavioural intervention group (n=129, 3 RCTs, WMD −1.69 kg CI −2.8 to −0.6) compared with standard care. Authors’ conclusions Modest weight loss can be achieved with selective

  4. Weight changes in euthyroid patients undergoing thyroidectomy.

    Science.gov (United States)

    Jonklaas, Jacqueline; Nsouli-Maktabi, Hala

    2011-12-01

    Thyroidectomized patients frequently report weight gain resistant to weight loss efforts, identifying their thyroidectomy as the event precipitating subsequent weight gain. We wished to determine whether recently thyroidectomized euthyroid patients gained more weight over 1 year than matched euthyroid patients with preexisting hypothyroidism. We performed a retrospective chart review of subjects receiving medical care at an academic medical center. One hundred twenty patients had their weight and thyroid status documented after thyroidectomy and achievement of euthyroidism on thyroid hormone replacement, and one year later. Three additional groups of 120 patients with preexisting hypothyroidism, no thyroid disease, and thyroid cancer were matched for age, gender, menopausal status, height, and weight. Anthropometric data were documented at two time points 1 year apart. We compared the weight changes and body mass index changes occurring over a 1-year period in the four groups. Patients with recent postsurgical hypothyroidism gained 3.1 kg during the year, whereas matched patients with preexisting hypothyroidism gained 2.2 kg. The patients without thyroid disease and those with iatrogenic hyperthyroidism gained 1.3 and 1.2 kg, respectively. The weight gain in the thyroidectomized group was significantly greater than that in the matched hypothyroid group (p-value 0.004), the group without thyroid disease (p-value 0.001), and the patients with iatrogenic hyperthyroidism (p-value 0.001). Within the thyroidectomized group, the weight gain in menopausal women was greater than in either premenopausal women (4.4 vs. 2.3 kg, p-value 0.007) or men (4.4 vs. 2.5 kg, p-value 0.013). Patients who had undergone thyroidectomy in the previous year did, in fact, gain more weight than their matched counterparts with preexisting hypothyroidism. In addition, all patients with hypothyroidism, even though treated to achieve euthyroidism, experienced more weight gain than both

  5. Weighted semiconvex spaces of measurable functions

    International Nuclear Information System (INIS)

    Olaleru, J.O.

    2001-12-01

    Semiconvex spaces are intermediates between locally convex spaces and the non locally convex topological vector spaces. They include all locally convex spaces; hence it is a generalization of locally convex spaces. In this article, we make a study of weighted semiconvex spaces parallel to weighted locally convex spaces where continuous functions are replaced with measurable functions and N p family replaces Nachbin family on a locally compact space X. Among others, we examine the Hausdorffness, completeness, inductive limits, barrelledness and countably barrelledness of weighted semiconvex spaces. New results are obtained while we have a more elegant proofs of old results. Furthermore, we get extensions of some of the old results. It is observed that the technique of proving theorems in weighted locally convex spaces can be adapted to that of weighted semicovex spaces of measurable functions in most cases. (author)

  6. Modified Weighted Kaplan-Meier Estimator

    Directory of Open Access Journals (Sweden)

    Mohammad Shafiq

    2007-01-01

    Full Text Available In many medical studies majority of the study subjects do not reach to the event of interest during the study period. In such situations survival probabilities can be estimated for censored observation by Kaplan Meier estimator. However in case of heavy censoring these estimates are biased and over estimate the survival probabilities. For heavy censoring a new method was proposed (Bahrawar Jan, 2005 to estimate the survival probabilities by weighting the censored observations by non-censoring rate. But the main defect in this weighted method is that it gives zero weight to the last censored observation. To over come this difficulty a new weight is proposed which also gives a non-zero weight to the last censored observation.

  7. High tobacco consumption lowers body weight

    DEFF Research Database (Denmark)

    Winsløw, Ulrik C; Rode, Line; Nordestgaard, Børge G

    2015-01-01

    in former or never smokers. CONCLUSIONS: High tobacco consumption causes lower body weight among current smokers. However, smoking does not seem to affect body shape or fat distribution causally. The lack of association between CHRNA3 genotype and body weight among former smokers and never smokers favours......BACKGROUND: Conflicting evidence has been found regarding the association between high tobacco consumption and body weight among smokers. We tested the hypothesis that high tobacco consumption is causally associated with low body weight. METHODS: We conducted a Mendelian randomization study...... with a genetic variant in CHRNA3 (rs1051730) as proxy for high tobacco consumption. The cohort consisted of 80,342 participants from the Copenhagen General Population Study, with details on body weight, smoking habits and CHRNA3 genotype, including 15,220 current smokers. RESULTS: In observational analyses, high...

  8. Maintained intentional weight loss reduces cardiovascular outcomes

    DEFF Research Database (Denmark)

    Caterson, I D; Finer, N; Coutinho, W

    2012-01-01

    Aim: The Sibutramine Cardiovascular OUTcomes trial showed that sibutramine produced greater mean weight loss than placebo but increased cardiovascular morbidity but not mortality. The relationship between 12-month weight loss and subsequent cardiovascular outcomes is explored. Methods: Overweight....../obese subjects (N = 10 744), =55 years with cardiovascular disease and/or type 2 diabetes mellitus, received sibutramine plus weight management during a 6-week Lead-in Period before randomization to continue sibutramine (N = 4906) or to receive placebo (N = 4898). The primary endpoint was the time from...... randomization to first occurrence of a primary outcome event (non-fatal myocardial infarction, non-fatal stroke, resuscitated cardiac arrest or cardiovascular death). Results: For the total population, mean weight change during Lead-in Period (sibutramine) was -2.54 kg. Post-randomization, mean total weight...

  9. Two-pole microring weight banks.

    Science.gov (United States)

    Tait, Alexander N; Wu, Allie X; Ferreira de Lima, Thomas; Nahmias, Mitchell A; Shastri, Bhavin J; Prucnal, Paul R

    2018-05-15

    Weighted addition is an elemental multi-input to single-output operation that can be implemented with high-performance photonic devices. Microring (MRR) weight banks bring programmable weighted addition to silicon photonics. Prior work showed that their channel limits are affected by coherent inter-channel effects that occur uniquely in weight banks. We fabricate two-pole designs that exploit this inter-channel interference in a way that is robust to dynamic tuning and fabrication variation. Scaling analysis predicts a channel count improvement of 3.4-fold, which is substantially greater than predicted by incoherent analysis used in conventional MRR devices. Advances in weight bank design expand the potential of reconfigurable analog photonic networks and multivariate microwave photonics.

  10. Employers should disband employee weight control programs.

    Science.gov (United States)

    Lewis, Alfred; Khanna, Vikram; Montrose, Shana

    2015-02-01

    American corporations continue to expand wellness programs, which now reach an estimated 90% of workers in large organizations, yet no study has demonstrated that the main focus of these programs-weight control-has any positive effect. There is no published evidence that large-scale corporate attempts to control employee body weight through financial incentives and penalties have generated savings from long-term weight loss, or a reduction in inpatient admissions associated with obesity or even long-term weight loss itself. Other evidence contradicts the hypothesis that population obesity rates meaningfully retard economic growth or manufacturing productivity. Quite the contrary, overscreening and crash dieting can impact employee morale and even harm employee health. Therefore, the authors believe that corporations should disband or significantly reconfigure weight-oriented wellness programs, and that the Affordable Care Act should be amended to require such programs to conform to accepted guidelines for harm avoidance.

  11. Preserving Healthy Muscle during Weight Loss123

    Science.gov (United States)

    Cava, Edda; Yeat, Nai Chien; Mittendorfer, Bettina

    2017-01-01

    Weight loss is the cornerstone of therapy for people with obesity because it can ameliorate or completely resolve the metabolic risk factors for diabetes, coronary artery disease, and obesity-associated cancers. The potential health benefits of diet-induced weight loss are thought to be compromised by the weight-loss–associated loss of lean body mass, which could increase the risk of sarcopenia (low muscle mass and impaired muscle function). The objective of this review is to provide an overview of what is known about weight-loss–induced muscle loss and its implications for overall physical function (e.g., ability to lift items, walk, and climb stairs). The currently available data in the literature show the following: 1) compared with persons with normal weight, those with obesity have more muscle mass but poor muscle quality; 2) diet-induced weight loss reduces muscle mass without adversely affecting muscle strength; 3) weight loss improves global physical function, most likely because of reduced fat mass; 4) high protein intake helps preserve lean body and muscle mass during weight loss but does not improve muscle strength and could have adverse effects on metabolic function; 5) both endurance- and resistance-type exercise help preserve muscle mass during weight loss, and resistance-type exercise also improves muscle strength. We therefore conclude that weight-loss therapy, including a hypocaloric diet with adequate (but not excessive) protein intake and increased physical activity (particularly resistance-type exercise), should be promoted to maintain muscle mass and improve muscle strength and physical function in persons with obesity. PMID:28507015

  12. A "small-changes" workplace weight loss and maintenance program: examination of weight and health outcomes.

    Science.gov (United States)

    Zinn, Caryn; Schofield, Grant M; Hopkins, Will G

    2012-10-01

    To compare the effect of "small-changes" and "usual care" workplace interventions on weight loss and to investigate the effect of small changes with or without maintenance on weight and health outcomes. Overweight/obese employees at two New Zealand worksites received a 12-month usual-care intervention (n = 53), followed by a 12-month small-changes intervention (n = 102). Small changes comprised a 12-week component, followed by 9 months of maintenance, implemented at only one worksite. Magnitudes of effects were assessed via a threshold of -5% (weight loss) and standardization (health outcomes). Small changes showed beneficial weight loss relative to usual care in both worksites. For small-changes interventions, worksites reduced weight (12 weeks) and maintained lost weight (12 months). One in every three participants lost 5% or more weight. Some improvements in health outcomes were shown. Regardless of maintenance, the small-changes intervention was successful in sustaining weight loss.

  13. 40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... adjusted loaded vehicle weight, as defined in § 86.094-2 or 86.1803-01 as applicable. For all other vehicles, test weight basis shall be loaded vehicle weight, as defined in § 86.082-2 or 86.1803-01 as... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load power, test weight, and...

  14. History of Smoking and Postcessation Weight Gain among Weight Loss Surgery Candidates

    OpenAIRE

    Levine, Michele D.; Kalarchian, Melissa A.; Courcoulas, Anita P.; Wisinski, Meghan S.C.; Marcus, Marsha D.

    2007-01-01

    Smoking cessation often results in weight gain. Although smoking cessation frequently is recommended to patients presenting for weight loss surgery (WLS), the relationship between smoking cessation and weight gain among WLS candidates is poorly understood. Thus, we sought to document the history and prevalence of smoking and smoking-related weight gain among WLS candidates. Subjects (N = 67) presenting for bariatric surgery provided demographic information, were interviewed about smoking, and...

  15. Effects of egg weight on hatchability, chick hatch-weight and ...

    African Journals Online (AJOL)

    Egg weight was positively and strongly correlated with egg hatchability (r2 = 0.727) and chick hatch-weight (r2 = 0.953). Heavier-sized eggs hatched chicks had higher mortality rates. Growth rate and live weight of the chickens were optimized at different egg weights of 56 (r2 = 0.657) and 60 (r2 = 0.870) g, respectively, ...

  16. Executive functions predict weight loss in a medically supervised weight loss programme

    OpenAIRE

    Galioto, R.; Bond, D.; Gunstad, J.; Pera, V.; Rathier, L.; Tremont, G.

    2016-01-01

    Summary Background Deficits in executive functions are related to poorer weight loss after bariatric surgery; however, less is known about the role that these deficits may play during participation in nonsurgical weight loss programmes. This study examined associations between objectively measured executive functions and weight loss during participation in a medically supervised weight loss programme. Methods Twenty?three adult patients (age 50.4???15.1, BMI 44.2???8.8, 68% female, 92% White)...

  17. Pengaruh Weight Training Dan Body Weight Training Terhadap Power Tungkai Atlet Bola Tangan

    OpenAIRE

    Ahmad Nasrullah,, Rizki Muhammad Afif

    2016-01-01

    Belum diketahuinya latihan berpengaruh untuk meningkatkan power tungkai atlet bola tangan. Penelitian ini bertujuan untuk: (1) mengetahui pengaruh weight training terhadap power otot tungkai atlet bola tangan, (2) mengetahui pengaruh body weight training terhadap power otot tungkai atlet bola tangan, dan (3) mengetahui metode latihan yang lebih berpengaruh antara weight training dan body weight training terhadap power otot tungkai atlet bola tangan.Penelitian ini adalah eksperimen dengan desa...

  18. Tailoring dietary approaches for weight loss.

    Science.gov (United States)

    Gardner, C D

    2012-07-01

    Although the 'Low-Fat' diet was the predominant public health recommendation for weight loss and weight control for the past several decades, the obesity epidemic continued to grow during this time period. An alternative 'low-carbohydrate' (Low-Carb) approach, although originally dismissed and even vilified, was comparatively tested in a series of studies over the past decade, and has been found in general to be as effective, if not more, as the Low-Fat approach for weight loss and for several related metabolic health measures. From a glass half full perspective, this suggests that there is more than one choice for a dietary approach to lose weight, and that Low-Fat and Low-Carb diets may be equally effective. From a glass half empty perspective, the average amount of weight lost on either of these two dietary approaches under the conditions studied, particularly when followed beyond 1 year, has been modest at best and negligible at worst, suggesting that the two approaches may be equally ineffective. One could resign themselves at this point to focusing on calories and energy intake restriction, regardless of macronutrient distributions. However, before throwing out the half-glass of water, it is worthwhile to consider that focusing on average results may mask important subgroup successes and failures. In all weight-loss studies, without exception, the range of individual differences in weight change within any particular diet groups is orders of magnitude greater than the average group differences between diet groups. Several studies have now reported that adults with greater insulin resistance are more successful with weight loss on a lower-carbohydrate diet compared with a lower-fat diet, whereas adults with greater insulin sensitivity are equally or more successful with weight loss on a lower-fat diet compared with a lower-carbohydrate diet. Other preliminary findings suggest that there may be some promise with matching individuals with certain genotypes to

  19. How College Students Search the Internet for Weight Control and Weight Management Information: An Observational Study

    Science.gov (United States)

    Senkowski, Valerie; Branscum, Paul

    2015-01-01

    Background: Few studies have attempted to examine how young adults search for health information on the Internet, especially information related to weight control and weight management. Purpose: The purpose of this study was to determine search strategies that college students used for finding information related to weight control and weight…

  20. Weight-Loss Expectancies, Relative Weight, and Symptoms of Bulimia in Young Women.

    Science.gov (United States)

    Thombs, Dennis L.; And Others

    1996-01-01

    A canonical correlation analysis of various weight concerns in a sample of college women revealed that strong expectations of weight loss benefits and a high relative body weight were positively correlated with the four major symptoms of bulimia. Expectations of increased self-worth and social confidence were linked to eating problems. (RJM)

  1. Rise of plasma ghrelin with weight loss is not sustained during weight maintenance

    Science.gov (United States)

    Ghrelin is postulated to be an orexigenic signal that promotes weight regain after weight loss (WL). However, it is not known whether this putative effect of ghrelin is sustained after weight stabilization. The objective of this study was to investigate the relationship of plasma ghrelin concentrati...

  2. Conjugation weights and weighted convolution algebras on totally disconnected, locally compact groups

    OpenAIRE

    Willis, George

    2013-01-01

    A family of equivalent submultiplicative weights on the to- tally disconnected, locally compact group $G$ is defined in terms of the conjugation action of $G$ on itself. These weights therefore reflect the structure of $G$, and the corresponding weighted convolution algebra is intrinsic to $G$ in the same way that $L^1(G) is.

  3. 40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. Applicability. Section 86.129-94 (a) applies... testing using paragraphs (e)(1) and (e)(2) of this section. (f)(1) Required test dynamometer inertia...

  4. 40 CFR 86.1772-99 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Road load power, test weight, and inertia weight class determination. 86.1772-99 Section 86.1772-99 Protection of Environment ENVIRONMENTAL... for Light-Duty Vehicles and Light-Duty Trucks § 86.1772-99 Road load power, test weight, and inertia...

  5. Metabolic Responses to Weight Lifting

    Directory of Open Access Journals (Sweden)

    Arnold Nelson

    2017-04-01

    Full Text Available Editor's Note, The ability to lift heavy loads while performing multiple repetitions is not only highly correlated with muscle mass or the total number actomyosin interactions, but also metabolic functions that includes substrate concentrations and by-product removal.  Muscles use adenosine triphosphate (ATP in at least three locations during exercise; to run the actomyosin interaction, operate sarcoplasmic reticulum calcium pumps, and operate sarcolemma sodium and potassium pumps.  Weight lifting sessions are considered to be an intermittent activity that includes only a few second bursts of high force and/or velocity movements followed by rest periods of up to several minutes. Therefore, the anaerobic pathways such as the phosphagen and glycolytic systems are the initial pathways to respond due in part to the ability to match the increased rates of ATP depletion by increasing ATP production. After the initial resting ATP stores are used up, the phosphagen system starts contributing to ATP replenishment.  This system consists of reactions from the creatine kinase (CK pathway and the adenylate kinase (AK pathway.  However, the CK pathway can only work at max capacity for a short period for resting phosphocreatine (PCr concentrations are only about 4-6 times the amount of resting ATP stores.  Once the PCr concentrations are depleted, the AK reaction will begin by using two adenosine diphosphate (ADP to form one ATP and one adenosine monophosphate (AMP. Although ATP is produced in this pathway, this production of ATP does coincide with an increased concentration of AMP. This is problematic because increased AMP levels will in turn stimulate the adenylate deaminase reaction, which will produce ammonia (NH3. This conversion of AMP into NH3 will result in the muscle cell having a net loss of total adenine nucleotides available to resynthesize ATP.  Glycolysis is the next reaction in line, which increases its role in ATP replenishment as PCr

  6. Geographically weighted regression model on poverty indicator

    Science.gov (United States)

    Slamet, I.; Nugroho, N. F. T. A.; Muslich

    2017-12-01

    In this research, we applied geographically weighted regression (GWR) for analyzing the poverty in Central Java. We consider Gaussian Kernel as weighted function. The GWR uses the diagonal matrix resulted from calculating kernel Gaussian function as a weighted function in the regression model. The kernel weights is used to handle spatial effects on the data so that a model can be obtained for each location. The purpose of this paper is to model of poverty percentage data in Central Java province using GWR with Gaussian kernel weighted function and to determine the influencing factors in each regency/city in Central Java province. Based on the research, we obtained geographically weighted regression model with Gaussian kernel weighted function on poverty percentage data in Central Java province. We found that percentage of population working as farmers, population growth rate, percentage of households with regular sanitation, and BPJS beneficiaries are the variables that affect the percentage of poverty in Central Java province. In this research, we found the determination coefficient R2 are 68.64%. There are two categories of district which are influenced by different of significance factors.

  7. Optimal weight gain in triplet pregnancies.

    Science.gov (United States)

    Johnston, Robert C; Erfani, Hadi; Shamshirsaz, Amir A; Spiel, Melissa; Ravangard, Sam F; Shaman, Majid; Allaf, M Baraa; Shamshirsaz, Alireza A; Haeri, Sina

    2017-08-01

    To identify appropriate weight gain in triplet gestations, which may aid in reducing the risk of perinatal morbidity within this high-risk cohort. This retrospective cohort study evaluated all non-anomalous triplet pregnancies between 23 and 40 weeks' gestation resulting in live births at five tertiary-care medical centers between 1991 and 2011. Subjects were divided by pre-pregnancy BMI into underweight, normal-weight, overweight, and obese groups, and then stratified by low (gain (≥1.5 lbs/week). Primary outcomes included spontaneous preterm birth and preeclampsia. We included 116 mothers and 348 corresponding neonates for final analysis. The incidence of preeclampsia and preterm delivery less than 32 weeks' gestation was 37% and 41%, respectively. The incidence of preeclampsia increased with weight gain per week, but was not statistically different from subjects who gained less weight. We found no statistical correlation between weight gain per week and preterm delivery. We found no association between preeclampsia or preterm delivery and increasing weight gain in triplet pregnancies. The association with increased risk for preeclampsia was predominantly due to BMI effect. Based on the current study, recommendations for optimal weight gain in mothers with triplet gestations could not be defined.

  8. Clarifying atomic weights: A 2016 four-figure table of standard and conventional atomic weights

    Science.gov (United States)

    Coplen, Tyler B.; Meyers, Fabienne; Holden, Norman E.

    2017-01-01

    To indicate that atomic weights of many elements are not constants of nature, in 2009 and 2011 the Commission on Isotopic Abundances and Atomic Weights (CIAAW) of the International Union of Pure and Applied Chemistry (IUPAC) replaced single-value standard atomic weight values with atomic weight intervals for 12 elements (hydrogen, lithium, boron, carbon, nitrogen, oxygen, magnesium, silicon, sulfur, chlorine, bromine, and thallium); for example, the standard atomic weight of nitrogen became the interval [14.00643, 14.00728]. CIAAW recognized that some users of atomic weight data only need representative values for these 12 elements, such as for trade and commerce. For this purpose, CIAAW provided conventional atomic weight values, such as 14.007 for nitrogen, and these values can serve in education when a single representative value is needed, such as for molecular weight calculations. Because atomic weight values abridged to four figures are preferred by many educational users and are no longer provided by CIAAW as of 2015, we provide a table containing both standard atomic weight values and conventional atomic weight values abridged to four figures for the chemical elements. A retrospective review of changes in four-digit atomic weights since 1961 indicates that changes in these values are due to more accurate measurements over time or to the recognition of the impact of natural isotopic fractionation in normal terrestrial materials upon atomic weight values of many elements. Use of the unit “u” (unified atomic mass unit on the carbon mass scale) with atomic weight is incorrect because the quantity atomic weight is dimensionless, and the unit “amu” (atomic mass unit on the oxygen scale) is an obsolete term: Both should be avoided.

  9. Serum Concentration of Leptin in Pregnant Adolescents Correlated with Gestational Weight Gain, Postpartum Weight Retention and Newborn Weight/Length

    OpenAIRE

    Reyna Sámano; Hugo Martínez-Rojano; Gabriela Chico-Barba; Estela Godínez-Martínez; Bernarda Sánchez-Jiménez; Diana Montiel-Ojeda; Maricruz Tolentino

    2017-01-01

    Introduction: Gestational weight gain is an important modifiable factor known to influence fetal outcomes including birth weight and adiposity. Leptin is normally correlated with adiposity and is also known to increase throughout pregnancy, as the placenta becomes a source of leptin synthesis. Several studies have reported positive correlations between cord blood leptin level and either birthweight or size for gestational age, as well as body mass index (BMI). Objective: To determine the corr...

  10. Genetic analysis of faecal worm egg count in South African Merinos ...

    African Journals Online (AJOL)

    Sheep from a Merino selection experiment at the Tygerhoek research farm in the Southern Cape provided material for this study. The selection lines involved included a line selected for clean fleece weight, a “Wet and Dry” line, a fine wool line and an unselected Control line. Rectal faeces samples were obtained from ...

  11. Dramatic weight loss associated with commencing clozapine.

    Science.gov (United States)

    Lally, John; McDonald, Colm

    2011-11-08

    The authors report the case of a 44-year-old man with a long history of chronic enduring schizophrenia who experienced dramatic weight loss after commencing treatment with clozapine, an antipsychotic medication characteristically associated with the greatest degree of weight gain among medical treatments for schizophrenia. He was obese with a body mass index (BMI) of 41.5 kg/m(2), but after commencing clozapine therapy he experienced an improvement in psychotic symptoms and 40% loss of his body weight attained through an altered diet and exercise regime, which resulted in him attaining a normal BMI of 24.8 kg/m(2).

  12. Evidence for weight effects in Russian

    DEFF Research Database (Denmark)

    Kizach, Johannes

    2012-01-01

    It is well-known that factors such as weight, pronominality, animacy and newness influence word order in several languages, but whereas newness repeatedly has been argued to be a relevant factor for Russian, little or no attention has been paid to weight. In this paper, which is based on evidence...... from corpus data, weight is demonstrated to have a very significant influence on word order in Russian. Specifically, four constructions are tested: Postverbal PPs, the double object construction, adversity impersonals and the order of S, V and O. In all cases the same pattern emerges: The heavier...

  13. Structure and growth of weighted networks

    Energy Technology Data Exchange (ETDEWEB)

    Riccaboni, Massimo [Department of Computer and Management Sciences, University of Trento, Trento (Italy); Schiavo, Stefano [Department of Economics, University of Trento, Trento (Italy)], E-mail: massimo.riccaboni@unitn.it, E-mail: stefano.schiavo@unitn.it

    2010-02-15

    We develop a simple theoretical framework for the evolution of weighted networks that is consistent with a number of stylized features of real-world data. In our framework, the Barabasi-Albert model of network evolution is extended by assuming that link weights evolve according to a geometric Brownian motion. Our model is verified by means of simulations and real-world trade data. We show that the model correctly predicts the intensity and growth distribution of links, the size-variance relationship of the growth of link weights, the relationship between the degree and strength of nodes, and the scale-free structure of the network.

  14. Does higher education reduce body weight?

    DEFF Research Database (Denmark)

    Greve, Jane; Weatherall, Cecilie Dohlmann

    The prevalence of obesity and overweight has increased in almost all Western countries in the past twenty to thirty years, with social disparities in many of these countries. This paper contributes to the literature on the relation between education and body weight by studying the effect of higher...... education on body weight according to subgroups of parental income background. To uncover the causal relationship between higher education and body weight, we use a reform of the Danish student grant scheme, which involved a grant increase of approximately 60% in 1988. When using this reform as instrumental...

  15. Weight monitoring system for newborn incubator application

    Science.gov (United States)

    Widianto, Arif; Nurfitri, Intan; Mahatidana, Pradipta; Abuzairi, Tomy; Poespawati, N. R.; Purnamaningsih., Retno W.

    2018-02-01

    We proposed weight monitoring system using load cell sensor for newborn incubator application. The weight sensing system consists of a load cell, conditioning signal circuit, and microcontroller Arduino Uno R3. The performance of the sensor was investigated by using the various weight from 0 up to 3000 g. Experiment results showed that this system has a small error of 4.313% and 12.5 g of threshold and resolution value. Compared to the typical baby scale available in local market, the proposed system has a lower error value and hysteresis.

  16. Weight bias internalization across weight categories among school-aged children. Validation of the Weight Bias Internalization Scale for Children.

    Science.gov (United States)

    Zuba, Anna; Warschburger, Petra

    2018-06-01

    Anti-fat bias is widespread and is linked to the internalization of weight bias and psychosocial problems. The purpose of this study was to examine the internalization of weight bias among children across weight categories and to evaluate the psychometric properties of the Weight Bias Internalization Scale for Children (WBIS-C). Data were collected from 1484 primary school children and their parents. WBIS-C demonstrated good internal consistency (α = .86) after exclusion of Item 1. The unitary factor structure was supported using exploratory and confirmatory factor analyses (factorial validity). Girls and overweight children reported higher WBIS-C scores in comparison to boys and non-overweight peers (known-groups validity). Convergent validity was shown by significant correlations with psychosocial problems. Internalization of weight bias explained additional variance in different indicators of psychosocial well-being. The results suggest that the WBIS-C is a psychometrically sound and informative tool to assess weight bias internalization among children. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. Maternal pre-pregnancy body mass index, gestational weight gain influence birth weight.

    Science.gov (United States)

    Zhao, R; Xu, L; Wu, M L; Huang, S H; Cao, X J

    2018-02-01

    Evidence suggests that pre-pregnancy body mass index and gestational weight gain have impact on pregnancy and birth weight, yet whether maternal gestational weight gain has a differential effect on the rates of adverse birth weight among women with different pre-pregnancy body mass index categories are unknown. We selected 1617 children matched with their mothers as study subjects. The subjects were divided into three categories: weight gain below the American Institute of Medicine guidelines, weight gain within the American Institute of Medicine guidelines and weight gain above the American Institute of Medicine guidelines. The prevalence of pre-pregnancy underweight and overweight/obese women was 16.3% and 12.3%. And nearly 15.2% of the women had gestational weight gain below American Institute of Medicine guideline, 52.1% of the women had gestational weight gain above American Institute of Medicine guideline. Maternal overweight and obese was associated with increased risk for macrosomia and large-for-gestational age. Women had gestational weight gain below American Institute of Medicine guideline were more likely to have low birth weight and small-for-gestational age than women who had gestational weight gain within American Institute of Medicine guideline. Furthermore, the risks for macrosomia and large-for-gestational age were increased in women with above American Institute of Medicine guideline. And for women with a normal weight before pregnancy, gestational weight gain above the American Institute of Medicine guidelines were associated with higher rates of macrosomia and large-for-gestational age, compared with the women of similar pre-pregnancy weight category but with gestational weight gain within the American Institute of Medicine guidelines. Women with abnormal pre-pregnancy body mass index and gestational weight gain are at risk for adverse birth weight outcomes. Moreover, gestational weight gain has a differential effect on the rates of adverse

  18. Association between Weight and Smoking Not Mediated by Weight Loss Attempts or Bullying.

    Science.gov (United States)

    Minaker, Leia M; Leatherdale, Scott T

    2016-01-01

    Youth smoking and obesity may both be mediated by weight control behaviors and experiences of bullying. This study examines associations between smoking and obesity among youth, and explores whether associations are mediated by weight loss attempts or bullying experiences. Data from 24,173 grade 9 to 12 students in the COMPASS study (2012-13) were used to examine the prevalence of self-reported smoking, weight status, attempting to lose weight, and being a victim of bullying. Generalized linear mixed effects models were used to examine correlates of smoking. Among youth, 11% reported currently smoking, 20% were overweight or obese, 42% reported attempting to lose weight, and 18% reported being bullied. Girls who reported attempting to lose weight had higher odds of smoking (OR = 1.42, p = .0039), and students who reported being bullied had higher odds of smoking (OR = 1.85, p weight status. For girls, weight loss attempts were associated with smoking. For both sexes, being bullied was associated with smoking, independent of weight status. Programs attempting to reduce smoking among youth should consider the effects of weight control behaviors and bullying irrespective of weight status.

  19. Self-perception of body weight status and weight control practices among adolescents in Malaysia.

    Science.gov (United States)

    Zainuddin, Ahmad Ali; Manickam, Mala A; Baharudin, Azli; Omar, Azahadi; Cheong, Siew Man; Ambak, Rashidah; Ahmad, Mohamad Hasnan; Ghaffar, Suhaila Abdul

    2014-09-01

    The prevalence of overweight and obesity among adolescents is rising rapidly in many countries, including Malaysia. This article aims to present the associations between body mass index-based body weight status, body weight perception, and weight control practices among adolescents in Malaysia. The Malaysia School Based Nutrition Survey 2012, which included a body weight perception questionnaire and anthropometric measurements, was conducted on a representative sample of 40 011 students from Standard 4 until Form 5, with a 90.5% response rate. Comparing actual and perceived body weight status, the findings show that 13.8% of adolescents underestimated their weight, 35.0% overestimated, and 51.2% correctly judged their own weight. Significantly more normal weight girls felt they were overweight, whereas significantly more overweight boys perceived themselves as underweight. The overall appropriateness of weight control practices to body weight was 72.6%. Adolescents attempting to lose or gain weight need to have better understanding toward desirable behavioral changes. © 2014 APJPH.

  20. Continuous gamma irradiation influence on food intake, body weight, and weight of some rat organs

    Energy Technology Data Exchange (ETDEWEB)

    Malatova, Z [Institute of Neurobiology SAV, Kosice (Czechoslovakia); Sedlakova, A; Ahlers, I; Praslicka, M [Univerzita P.J. Safarika, Kosice (Czechoslovakia). Prirodovedecka Fakulta

    1977-01-01

    Food intake, body weight and weight of some organs were studied in male Wistar rats within 25 days of continuous gamma irradiation at a dose rate of 15.48 x 10/sup -3/ C/kg (6O R) per day in an experimental gamma field. A decrease in food intake and body weight and a decrease in thymus and spleen weights were found during the first week in irradiated rats. The thymus and spleen involutions did not progress within the second week. From the beginning of the third week till the end of the experiment the irradiated animals increased their weight and the food intake was even higher during the last week of irradiation in comparison with controls. The spleen and thymus involutions stopped but the weight remained at the lower level. The relative weight of the adrenal glands in irradiated animals only increased at the end of the period.

  1. Schizophrenia and weight management: a systematic review of interventions to control weight.

    Science.gov (United States)

    Faulkner, G; Soundy, A A; Lloyd, K

    2003-11-01

    Weight gain is a frequent side effect of antipsychotic medication which has serious implications for a patient's health and well being. This study systematically reviews the literature on the effectiveness of interventions designed to control weight gain in schizophrenia. A systematic search strategy was conducted of major databases in addition to citation searches. Study quality was rated. Sixteen studies met the inclusion criteria. Five of eight pharmacological intervention studies reported small reductions in weight (weight). All behavioural (including diet and/or exercise) interventions reported small reductions in, or maintenance of, weight. Weight loss may be difficult but it is not impossible. Given the inconsistent results, the widespread use of pharmacological interventions cannot be recommended. Both dietary and exercise counselling set within a behavioural modification programme is necessary for sustained weight control.

  2. Total and Trimester-Specific Gestational Weight Gain and Offspring Birth and Early Childhood Weight

    DEFF Research Database (Denmark)

    Scheers Andersson, Elina; Silventoinen, Karri; Tynelius, Per

    2016-01-01

    Gestational weight gain (GWG) has in numerous studies been associated with offspring birth weight (BW) and childhood weight. However, these associations might be explained by genetic confounding as offspring inherit their mother's genetic potential to gain weight. Furthermore, little is known about...... whether particular periods of pregnancy could influence offspring body weight differently. We therefore aimed to explore total and trimester-specific effects of GWG in monozygotic (MZ) twin mother-pairs on their offspring's BW, weight at 1 year and body mass index (BMI) at 5 and 10 years. MZ twin mothers...... statistically weak, suggested no associations between GWG and offspring weight or BMI during infancy or childhood. Our study suggests that total, and possibly also second and third trimester, GWG are associated with offspring BW when taking shared genetic and environmental factors within twin pairs into account...

  3. Heterosis and direct effects for Charolais-sired calf weight and growth, cow weight and weight change, and ratios of cow and calf weights and weight changes across warm season lactation in Romosinuano, Angus, and F cows in Arkansas.

    Science.gov (United States)

    Riley, D G; Burke, J M; Chase, C C; Coleman, S W

    2016-01-01

    The use of Brahman in cow-calf production offers some adaptation to the harsh characteristics of endophyte-infected tall fescue. Criollo breeds, such as the Romosinuano, may have similar adaptation. The objectives were to estimate genetic effects in Romosinuano, Angus, and crossbred cows for their weights, weights of their calves, and ratios (calf weight:cow weight and cow weight change:calf weight gain) across lactation and to assess the influence of forage on traits and estimates. Cows ( = 91) were bred to Charolais bulls after their second parity. Calves ( = 214) were born from 2006 to 2009. Cows and calves were weighed in early (April and June), mid- (July), and late lactation (August and October). Animal was a random effect in analyses of calf data; sire was random in analyses of cow records and ratios. Fixed effects investigated included calf age, calf sex, cow age-year combinations, sire breed of cow, dam breed of cow, and interactions. Subsequent analyses evaluated the effect of forage grazed: endophyte-free or endophyte-infected tall fescue. Estimates of maternal heterosis for calf weight ranged from 9.3 ± 4.3 to 15.4 ± 5.7 kg from mid-lactation through weaning ( cow) were -6.8 ± 3.0 and -8.9 ± 4.2 kg for weights recorded in April and June. Calf weights and weight gains from birth were greater ( cows grazing endophyte-free tall fescue except in mid-summer. Cow weight change from April to each time was negative for Angus cows and lower ( Cows grazing endophyte-free tall fescue were heavier ( cows had the lowest ( cow weight change:calf weight gain, indicating an energy-deficit condition. Cows grazing endophyte-free tall fescue had more negative ( cow weight, 7.9 ± 3.0 to 15.8 ± 5.0 kg for cow weight change, and 0.07 ± 0.03 to 0.27 ± 0.1 for cow weight change:calf weight gain. Direct Romosinuano effects ranged from 14.8 ± 4.2 to 49.8 ± 7.7 kg for cow weight change and 0.2 ± 0.04 to 0.51 ± 0.14 for cow weight change:calf weight gain. The adaptive

  4. The effects of maternal weight gain patterns on term birth weight in African-American women

    Science.gov (United States)

    Misra, Vinod K.; Hobel, Calvin J.; Sing, Charles F.

    2010-01-01

    Objective The goals of our study were 1) to estimate the trends in maternal weight gain patterns and 2) to estimate the influence of variation in maternal weight and rate of weight gain over different time periods in gestation on variation in birth weight in African-American and non-African-American gravidas. Study Design and Setting Data from a prospective cohort study in which pregnant women were monitored at multiple time points during pregnancy were analyzed. Maternal weight was measured at three times during pregnancy, preconception (W0); 16-20 weeks gestation (W1); and 30-36 weeks gestation (W2), in a cohort of 435 women with full-term singleton pregnancies. The relationship between gestational age-adjusted birth weight (aBW) and measures of maternal weight and rate of weight gain across pregnancy was estimated using a multivariable longitudinal regression analysis stratified on African-American race. Results The aBW was significantly associated with maternal weight measured at any visit in both strata. For African-American women, variation in aBW was significantly associated with variation in the rate of maternal weight gain in the first half of pregnancy (W01) but not the rate of maternal weight gain in the second half of pregnancy (W12); while for non-African-American women, variation in aBW was significantly associated with W12 but not W01. Conclusion Factors influencing the relationship between aBW and maternal weight gain patterns depend on the context of the pregnancy defined by race. Clinical decisions and recommendations about maternal weight and weight gain during pregnancy may need to account for such heterogeneity. PMID:20632908

  5. Prepregnancy body mass index, gestational weight gain, and birth weight in the BRISA cohort

    Directory of Open Access Journals (Sweden)

    Raina Jansen Cutrim Propp Lima

    2018-05-01

    Full Text Available ABSTRACT OBJECTIVE To analyze the effects of maternal pre-pregnancy body mass index and weight gain during pregnancy on the baby's birth weight. METHODS We conducted a cross-sectional study with 5,024 mothers and their newborns using a Brazilian birth cohort study. In the proposed model, estimated by structural equation modeling, we tested socioeconomic status, age, marital status, pre-pregnancy body mass index, smoking habit and alcohol consumption during pregnancy, hypertension and gestational diabetes, gestational weight gain, and type of delivery as determinants of the baby's birth weight. RESULTS For a gain of 4 kg/m2 (1 Standard Deviation [SD] in pre-pregnancy body mass index, there was a 0.126 SD increase in birth weight, corresponding to 68 grams (p < 0.001. A 6 kg increase (1 SD in gestational weight gain represented a 0.280 SD increase in newborn weight, correponding to 151.2 grams (p < 0.001. The positive effect of pre-pregnancy body mass index on birth weight was direct (standardized coefficient [SC] = 0.202; p < 0.001, but the negative indirect effect was small (SC = -0.076, p < 0.001 and partially mediated by the lower weight gain during pregnancy (SC = -0.070, p < 0.001. The positive effect of weight gain during pregnany on birth weight was predominantly direct (SC = 0.269, p < 0.001, with a small indirect effect of cesarean delivery (SC = 0.011; p < 0.001. Women with a higher pre-pregnancy body mass index gained less weight during pregnancy (p < 0.001. CONCLUSIONS The effect of gestational weight gain on the increase in birth weight was greater than that of pre-pregnancy body mass index.

  6. Spatial weighting of Doppler reactivity feedback

    International Nuclear Information System (INIS)

    Carew, J.F.; Diamond, D.J.; Todosow, M.

    1977-12-01

    The spatial weighting of the local Doppler feedback implicit in the determination of the core Doppler feedback reactivity has been investigated. Using a detailed planar PDQ7-II PWR model with local fuel-temperature feedback, the core Doppler spatial weight factor, S, has been determined for various control patterns and power levels. Assuming power-squared weighting of the local Doppler feedback, a simple analytic expression for S has been derived and, based on comparison with the PDQ7-II results, provides a convenient and accurate representation of the Doppler spatial weight factor. The sensitivity of these results to variations in the fuel rod heat transfer coefficients, fuel loading and the magnitude of the Doppler coefficient has also been evaluated. The dependence of the local Doppler coefficient on moderator temperature, boron concentration and control rod density has been determined and found to be weak. Selected comparisons with vendor analyses have been made and indicate general agreement

  7. Weight-Loss and Nutrition Myths

    Science.gov (United States)

    ... kale vitamin D—cereals or soy-based beverages Myth: “Going vegetarian” will help you lose weight and be healthier. Some research shows that a healthy vegetarian eating plan may be linked to lower obesity levels. ...

  8. Coffee Consumption During Pregnancy and Birth Weight

    DEFF Research Database (Denmark)

    Bech, Bodil Hammer; Frydenberg, Morten; Henriksen, Tine Brink

    2015-01-01

    weight and whether it was modified by the mothers' smoking habits. Methods: In the Danish National Birth Cohort, coffee intake and smoking during pregnancy were recorded prospectively in 89,539 pregnancies that ended with live born singletons. Information on birth weight was obtained from the Danish......Background: A previous randomized trial demonstrated an association between coffee intake and birth weight in smokers only. This could be a chance finding or because smoking interferes with caffeine metabolism. This study assessed the association between coffee intake during pregnancy and birth....../cup/day). Compared to non-coffee drinkers, intake of eight or more cups of coffee per day was associated with an adjusted birth weight difference of −65 g [95% confidence interval (CI) −92 to −39] for non-smokers and −79 g [95% CI −124 to −34] for women smoking more than 10 cigarettes per day. Women drinking eight...

  9. An Analysis of Weight Change in Filters

    National Research Council Canada - National Science Library

    Reilly, Matthew; Fultz, George; Gschwender, Lois

    2006-01-01

    ... to evaluate possible sources of error. Many sources of weight change exist, including particulate and water accumulation from air, buildup of static electricity causing interference with the metal microbalance pan, and removal...

  10. Brain nuclear receptors and body weight regulation

    Science.gov (United States)

    Neural pathways, especially those in the hypothalamus, integrate multiple nutritional, hormonal, and neural signals, resulting in the coordinated control of body weight balance and glucose homeostasis. Nuclear receptors (NRs) sense changing levels of nutrients and hormones, and therefore play essent...

  11. Molecular weight characterisation of synthetic polymers

    CERN Document Server

    Holding, Steve R

    1995-01-01

    The report comprises a state-of-the-art overview of the subject of molecular weight characterisation, supported by an extensive, indexed bibliography. The bibliography contains over 400 references and abstracts, compiled from the Polymer Library.

  12. Selecting a Weight-Loss Program

    Science.gov (United States)

    ... should teach you how to change permanently those eating habits and lifestyle factors, such as lack of physical ... skills and techniques to make permanent changes in eating habits and levels of physical activity to prevent weight ...

  13. Weighted conditional least-squares estimation

    International Nuclear Information System (INIS)

    Booth, J.G.

    1987-01-01

    A two-stage estimation procedure is proposed that generalizes the concept of conditional least squares. The method is instead based upon the minimization of a weighted sum of squares, where the weights are inverses of estimated conditional variance terms. Some general conditions are given under which the estimators are consistent and jointly asymptotically normal. More specific details are given for ergodic Markov processes with stationary transition probabilities. A comparison is made with the ordinary conditional least-squares estimators for two simple branching processes with immigration. The relationship between weighted conditional least squares and other, more well-known, estimators is also investigated. In particular, it is shown that in many cases estimated generalized least-squares estimators can be obtained using the weighted conditional least-squares approach. Applications to stochastic compartmental models, and linear models with nested error structures are considered

  14. Goal setting: Eating, Physical activity & Weight loss

    Science.gov (United States)

    No matter what your weight loss goal is, the key to reaching your goals is to make changes to your lifestyle behaviors like eating and physical activity. This involves setting realistic expectations and making a plan.

  15. Birth Weight: MedlinePlus Health Topic

    Science.gov (United States)

    ... growth restriction Large for gestational age (LGA) Neonatal weight gain and nutrition Small for gestational age (SGA) Related Health Topics Fetal Health and Development Premature Babies Uncommon Infant and Newborn Problems National Institutes of Health The primary NIH ...

  16. Weight-loss surgery and children

    Science.gov (United States)

    ... to the extra body weight. The body mass index (BMI) measures below are used by many doctors ... Saunders; 2015:chap 29. Mechanick JI, Youdim A, Jones DB, et al. Clinical practice guidelines for the ...

  17. High Molecular Weight Melanoidins from Coffee Brew

    NARCIS (Netherlands)

    Bekedam, E.K.; Schols, H.A.; Boekel, van T.; Smit, G.

    2006-01-01

    The composition of high molecular weight (HMw) coffee melanoidin populations, obtained after ethanol precipitation, was studied. The specific extinction coefficient (Kmix) at 280, 325, 405 nm, sugar composition, phenolic group content, nitrogen content, amino acid composition, and non-protein

  18. Allegheny County Weights and Measures Inspections

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Inspections conducted by the Allegheny County Bureau of Weights and Measures. The Bureau inspects weighing and timing devices such as gas pumps, laundromat timers,...

  19. Epidemic spreading on weighted complex networks

    International Nuclear Information System (INIS)

    Sun, Ye; Liu, Chuang; Zhang, Chu-Xu; Zhang, Zi-Ke

    2014-01-01

    Nowadays, the emergence of online services provides various multi-relation information to support the comprehensive understanding of the epidemic spreading process. In this Letter, we consider the edge weights to represent such multi-role relations. In addition, we perform detailed analysis of two representative metrics, outbreak threshold and epidemic prevalence, on SIS and SIR models. Both theoretical and simulation results find good agreements with each other. Furthermore, experiments show that, on fully mixed networks, the weight distribution on edges would not affect the epidemic results once the average weight of whole network is fixed. This work may shed some light on the in-depth understanding of epidemic spreading on multi-relation and weighted networks.

  20. Repository Waste Package Transporter Shielding Weight Optimization

    International Nuclear Information System (INIS)

    C.E. Sanders; Shiaw-Der Su

    2005-01-01

    The Yucca Mountain repository requires the use of a waste package (WP) transporter to transport a WP from a process facility on the surface to the subsurface for underground emplacement. The transporter is a part of the waste emplacement transport systems, which includes a primary locomotive at the front end and a secondary locomotive at the rear end. The overall system with a WP on board weights over 350 metric tons (MT). With the shielding mass constituting approximately one-third of the total system weight, shielding optimization for minimal weight will benefit the overall transport system with reduced axle requirements and improved maneuverability. With a high contact dose rate on the WP external surface and minimal personnel shielding afforded by the WP, the transporter provides radiation shielding to workers during waste emplacement and retrieval operations. This paper presents the design approach and optimization method used in achieving a shielding configuration with minimal weight

  1. Hemodynamic Consequences for Circuit Weight Training

    Science.gov (United States)

    Allen, T. Earl; And Others

    1976-01-01

    This study of high sustained heart rates observed during circuit weight training involving high resistance and low repetitions indicates that such training has no concurrent cardiovascular training effect. (MB)

  2. An objective approach to determining criteria weights

    Directory of Open Access Journals (Sweden)

    Milić R. Milićević

    2012-01-01

    Full Text Available This paper presents an objective approach to determining criteria weights that can be successfully used in multiple criteria models. The methods of entropy, CRITIC and FANMA are presented in this paper as well as a possible combination of the methods of objective and subjective approaches. Although based on different theoretical settings, and therefore with different algorithms of realization, all methods have a decision matrix as a starting point. An objective approach to determining the weight of criteria eliminates the negative impacts of a decision maker on criteria weights as well as on the final solution of multicriteria problems. The main aim of this paper is to systematize description procedures as a kind of help when encountering a problem of determining the criteria weights for solving multicriteria tasks. A possibility of the method application is shown in a numerical example.

  3. Three weights higher order Hardy type inequalities

    Directory of Open Access Journals (Sweden)

    Aigerim A. Kalybay

    2006-01-01

    Full Text Available We investigate the following three weights higher order Hardy type inequality (0.1 ‖g‖q,u≤  C‖Dρkg‖p,v where Dρi denotes the following weighted differential operator: {dig(tdti,i=0,1,...,m−1,di−mdti−m(p(tdmg(tdtm,i=m,m+1,...,k, for a weight function ρ(⋅. A complete description of the weights u, v and ρ so that (0.1 holds was given in [4] for the case 1

  4. Epidemic spreading on weighted complex networks

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Ye [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China); Liu, Chuang, E-mail: liuchuang@hznu.edu.cn [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China); Zhang, Chu-Xu [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China); Zhang, Zi-Ke, E-mail: zhangzike@gmail.com [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China)

    2014-01-31

    Nowadays, the emergence of online services provides various multi-relation information to support the comprehensive understanding of the epidemic spreading process. In this Letter, we consider the edge weights to represent such multi-role relations. In addition, we perform detailed analysis of two representative metrics, outbreak threshold and epidemic prevalence, on SIS and SIR models. Both theoretical and simulation results find good agreements with each other. Furthermore, experiments show that, on fully mixed networks, the weight distribution on edges would not affect the epidemic results once the average weight of whole network is fixed. This work may shed some light on the in-depth understanding of epidemic spreading on multi-relation and weighted networks.

  5. An Efficient Compiler for Weighted Rewrite Rules

    OpenAIRE

    Mohri, Mehryar; Sproat, Richard

    1996-01-01

    Context-dependent rewrite rules are used in many areas of natural language and speech processing. Work in computational phonology has demonstrated that, given certain conditions, such rewrite rules can be represented as finite-state transducers (FSTs). We describe a new algorithm for compiling rewrite rules into FSTs. We show the algorithm to be simpler and more efficient than existing algorithms. Further, many of our applications demand the ability to compile weighted rules into weighted FST...

  6. Beta Instability and Stochastic Market Weights

    OpenAIRE

    David H. Goldenberg

    1985-01-01

    An argument is given for individual firm beta instability based upon the stochastic character of the market weights defining the market portfolio and the constancy of its beta. This argument is generalized to market weighted portfolios and the form of the stochastic process generating betas is linked to that of the market return process. The implications of this analysis for adequacy of models of beta nonstationarity and estimation of betas are considered in light of the available empirical e...

  7. Dramatic weight loss associated with commencing clozapine

    OpenAIRE

    Lally, John; McDonald, Colm

    2011-01-01

    The authors report the case of a 44-year-old man with a long history of chronic enduring schizophrenia who experienced dramatic weight loss after commencing treatment with clozapine, an antipsychotic medication characteristically associated with the greatest degree of weight gain among medical treatments for schizophrenia. He was obese with a body mass index (BMI) of 41.5 kg/m2, but after commencing clozapine therapy he experienced an improvement in psychotic symptoms and 40% loss of his body...

  8. Ischemic Colitis after Weight-Loss Medication

    Directory of Open Access Journals (Sweden)

    Dan Comay

    2003-01-01

    Full Text Available BACKGROUND: Previous weight-loss medications have received cautious support due to their association with pulmonary hypertension and valvular heart disease. However, newer drugs are increasingly being recommended as potentially safer and more efficacious. We report a case of ischemic colitis possibly linked to the use of a weight-loss drug, and review the literature to highlight an important latent consequence of these medications.

  9. Weighted estimates for the averaging integral operator

    Czech Academy of Sciences Publication Activity Database

    Opic, Bohumír; Rákosník, Jiří

    2010-01-01

    Roč. 61, č. 3 (2010), s. 253-262 ISSN 0010-0757 R&D Projects: GA ČR GA201/05/2033; GA ČR GA201/08/0383 Institutional research plan: CEZ:AV0Z10190503 Keywords : averaging integral operator * weighted Lebesgue spaces * weights Subject RIV: BA - General Mathematics Impact factor: 0.474, year: 2010 http://link.springer.com/article/10.1007%2FBF03191231

  10. Weight and height prediction of immobilized patients

    OpenAIRE

    Rabito,Estela Iraci; Vannucchi,Gabriela Bergamini; Suen,Vivian Marques Miguel; Castilho Neto,Laércio Lopes; Marchini,Júlio Sérgio

    2006-01-01

    OBJECTIVE: To confirm the adequacy of the formula suggested in the literature and/or to develop appropriate equations for the Brazilian population of immobilized patients based on simple anthropometric measurements. METHODS: Hospitalized patients were submitted to anthropometry and methods to estimate weight and height of bedridden patients were developed by multiple linear regression. RESULTS: Three hundred sixty eight persons were evaluated at two hospital centers and five weight-predicting...

  11. Occupancy statistics arising from weighted particle rearrangements

    International Nuclear Information System (INIS)

    Huillet, Thierry

    2007-01-01

    The box-occupancy distributions arising from weighted rearrangements of a particle system are investigated. In the grand-canonical ensemble, they are characterized by determinantal joint probability generating functions. For doubly non-negative weight matrices, fractional occupancy statistics, generalizing Fermi-Dirac and Bose-Einstein statistics, can be defined. A spatially extended version of these balls-in-boxes problems is investigated

  12. Ventricular tachycardia induced by weight loss pills

    DEFF Research Database (Denmark)

    Pareek, Manan; Hansson, Nils Henrik; Grove, Erik Lerkevang

    2013-01-01

    A previously healthy 29-year-old man was admitted with palpitations, dizziness, and near-syncope after he had recently started taking weight loss pills purchased on the internet. The pills contained caffeine and ephedrine. An electrocardiogram and telemetry revealed multiple episodes of non......-sustained monomorphic ventricular tachycardia, which was successfully treated with amiodarone. In conclusion, unauthorized weight loss pills can be harmful. In particular, ephedrine-containing drugs carry a risk of ventricular tachycardia and should be discouraged....

  13. A CLASS OF WEIGHTED WEIBULL DISTRIBUTION

    Directory of Open Access Journals (Sweden)

    Saman Shahbaz

    2010-07-01

    Full Text Available The weighted Weibull model is proposed following the method of Azzalini (1985. Basic properties of the distribution; including moments, generating function, hazard rate function and estimation of parameters; have been studied. The weighted Weibull model is proposed following the method of Azzalini (1985. Basic properties of the distribution; including moments, generating function, hazard rate function and estimation of parameters; have been studied.

  14. Iran: Economy, Senility, and Ineptitude Greasing the Slide to Instability.

    Science.gov (United States)

    1986-01-13

    Business 5 Foreign Trade 6 Political Developments 8 Industry 10 Finance 12 Inflation 13 Rationing 14 Countertrade 16 Oil 17 War With Iraq 18 Outlook 20...imposed diplomatic isolation and threatening revolutionary rhetoric discourage foreign budgetary or balance of payments assistance. Countertrade : In...order to obtain these goods and services while reducing foreign exchange expenditures, Iran has expanded the use of barter and countertrade . Barter

  15. Nanoclays for polymer nanocomposites, paints, inks, greases and ...

    Indian Academy of Sciences (India)

    Unknown

    An overview of nanoclays or organically modified layered silicates ... silicates; nanocomposites; rheological modifier; drug delivery; waste water. 1. ... enhance the rheological properties of the paint system. .... tems (thermoset and thermoplastic) including epoxy .... involves adding organoclay as a dry powder prior to, or.

  16. Brooks Grease Service, Inc. - Clean Water Act Public Notice

    Science.gov (United States)

    The EPA is providing notice of a proposed Administrative Penalty Assessment against Forterra Concrete Products, Inc., a business located at 511 E. John Carpenter Freeway, Irving, TX, 75062, for alleged violations at its facility located at 23600 W. 40th St

  17. Asymptotics of quantum weighted Hurwitz numbers

    Science.gov (United States)

    Harnad, J.; Ortmann, Janosch

    2018-06-01

    This work concerns both the semiclassical and zero temperature asymptotics of quantum weighted double Hurwitz numbers. The partition function for quantum weighted double Hurwitz numbers can be interpreted in terms of the energy distribution of a quantum Bose gas with vanishing fugacity. We compute the leading semiclassical term of the partition function for three versions of the quantum weighted Hurwitz numbers, as well as lower order semiclassical corrections. The classical limit is shown to reproduce the simple single and double Hurwitz numbers studied by Okounkov and Pandharipande (2000 Math. Res. Lett. 7 447–53, 2000 Lett. Math. Phys. 53 59–74). The KP-Toda τ-function that serves as generating function for the quantum Hurwitz numbers is shown to have the τ-function of Okounkov and Pandharipande (2000 Math. Res. Lett. 7 447–53, 2000 Lett. Math. Phys. 53 59–74) as its leading term in the classical limit, and, with suitable scaling, the same holds for the partition function, the weights and expectations of Hurwitz numbers. We also compute the zero temperature limit of the partition function and quantum weighted Hurwitz numbers. The KP or Toda τ-function serving as generating function for the quantum Hurwitz numbers are shown to give the one for Belyi curves in the zero temperature limit and, with suitable scaling, the same holds true for the partition function, the weights and the expectations of Hurwitz numbers.

  18. Combining forecast weights: Why and how?

    Science.gov (United States)

    Yin, Yip Chee; Kok-Haur, Ng; Hock-Eam, Lim

    2012-09-01

    This paper proposes a procedure called forecast weight averaging which is a specific combination of forecast weights obtained from different methods of constructing forecast weights for the purpose of improving the accuracy of pseudo out of sample forecasting. It is found that under certain specified conditions, forecast weight averaging can lower the mean squared forecast error obtained from model averaging. In addition, we show that in a linear and homoskedastic environment, this superior predictive ability of forecast weight averaging holds true irrespective whether the coefficients are tested by t statistic or z statistic provided the significant level is within the 10% range. By theoretical proofs and simulation study, we have shown that model averaging like, variance model averaging, simple model averaging and standard error model averaging, each produces mean squared forecast error larger than that of forecast weight averaging. Finally, this result also holds true marginally when applied to business and economic empirical data sets, Gross Domestic Product (GDP growth rate), Consumer Price Index (CPI) and Average Lending Rate (ALR) of Malaysia.

  19. Definition of intertwin birth weight discordance.

    Science.gov (United States)

    Breathnach, Fionnuala M; McAuliffe, Fionnuala M; Geary, Michael; Daly, Sean; Higgins, John R; Dornan, James; Morrison, John J; Burke, Gerard; Higgins, Shane; Dicker, Patrick; Manning, Fiona; Mahony, Rhona; Malone, Fergal D

    2011-07-01

    To establish the level of birth weight discordance at which perinatal morbidity increases in monochorionic and dichorionic twin pregnancy. This prospective multicenter cohort study included 1,028 unselected twin pairs recruited over a 2-year period. Participants underwent two weekly ultrasonographic surveillance from 24 weeks of gestation with surveillance of monochorionic twins two-weekly from 16 weeks. Analysis using Cox proportional hazards compared a composite measure of perinatal morbidity (including any of the following: mortality, respiratory distress syndrome, hypoxic-ischemic encephalopathy, periventricular leukomalacia, necrotizing enterocolitis, or sepsis) at different degrees of birth weight discordance with adjustment for chorionicity, gestational age, twin-twin transfusion syndrome, birth order, gender, and growth restriction. Perinatal outcome data were recorded for 977 patients (100%) who continued the study with both fetuses alive beyond 24 weeks, including 14 cases of twin-twin transfusion syndrome. Adjusting for gestation at delivery, twin order, gender, and growth restriction, perinatal mortality, individual morbidity, and composite perinatal morbidity were all seen to increase with birth weight discordance exceeding 18% for dichorionic pairs (hazard ratio 2.2, 95% confidence interval [CI] 1.6-2.9, Pbirth weights were appropriate for gestational age. : The threshold for birth weight discordance established by this prospective study is 18% both for dichorionic twin pairs and for monochorionic twins without twin-twin transfusion syndrome. This threshold is considerably lower than that defined by many retrospective series as pathologic. We suggest that an anticipated difference of 18% in birth weight should prompt more intensive fetal monitoring.

  20. Personality type influence the gestational weight gain.

    Science.gov (United States)

    Franik, Grzegorz; Lipka, Nela; Kopyto, Katarzyna; Kopocińska, Joanna; Owczarek, Aleksander; Sikora, Jerzy; Madej, Paweł; Chudek, Jerzy; Olszanecka-Glinianowicz, Magdalena

    2017-08-01

    Pregnancy is frequently followed by the development of obesity. Aside from psychological factors, hormonal changes influence weight gain in pregnant women. We attempted to assess the potential association between personality type and the extent of gestational weight gain. The study group involved 773 women after term delivery (age 26.3 ± 3.9 years, body mass before pregnancy 61.2 ± 11.1 kg). Weight gain during pregnancy was calculated by using self-reported body mass prior to and during the 38th week of pregnancy. Personality type was assessed using the Polish version of the Framingham Type A Behavior Patterns Questionnaire (adapted by Juczynski). Two hundred forty-six (31.8%) study subjects represented type A personalities, 272 (35.2%) type B and 255 (33.0%) an indirect type. Gestational weight gain was related to the behavior patterns questionnaire score and age. In women gain was higher than in women with type B behavior of the same age. In women >30, the gestational weight gain was larger for type B personalities. Type A personality and increased urgency in younger pregnant women increases the risk of developing obesity during pregnancy in women below 30 years old. A higher level of competitiveness demonstrates a risk factor of excessive weight gain during pregnancy regardless of age.

  1. How Neighborhood Disadvantage Reduces Birth Weight

    Directory of Open Access Journals (Sweden)

    Emily Moiduddin

    2008-06-01

    Full Text Available In this analysis we connect structural neighborhood conditions to birth outcomes through their intermediate effects on mothers’ perceptions of neighborhood danger and their tendency to abuse substances during pregnancy. We hypothesize that neighborhood poverty and racial/ethnic concentration combine to produce environments that mothers perceive as unsafe, thereby increasing the likelihood of negative coping behaviors (substance abuse. We expect these behaviors, in turn, to produce lower birth weights. Using data from the Fragile Families and Child Wellbeing Study, a survey of a cohort of children born between 1998 and 2000 and their mothers in large cities in the United States, we find little evidence to suggest that neighborhood circumstances have strong, direct effects on birth weight. Living in a neighborhood with more foreigners had a positive effect on birth weight. To the extent that neighborhood conditions influence birth weight, the effect mainly occurs through an association with perceived neighborhood danger and subsequent negative coping behaviors. Poverty and racial/ethnic concentration increase a mother’s sense that her neighborhood is unsafe. The perception of an unsafe neighborhood, in turn, associates with a greater likelihood of smoking cigarettes and using illegal drugs, and these behaviors have strong and significant effects in reducing birth weight. However, demographic characteristics, rather than perceived danger or substance abuse, mediate the influence of neighborhood characteristics on birth weight.

  2. Gender and Socioeconomic Status in Relation to Weight Perception and Weight Control Behavior in Korean Adults

    Directory of Open Access Journals (Sweden)

    Hee-Kyung Joh

    2013-02-01

    Full Text Available Aim: In Korea, obesity is more prevalent among men and lower socioeconomic groups. To explain this obesity disparity, we compared weight perception and weight control behavior across gender and socioeconomic status (SES. Methods: We analyzed data from 16,260 participants aged 20 years or older in a nationally representative cross-sectional survey. SES indicators included education and income levels. Weight under-perception was defined when participants considered themselves lighter than their measured BMI status. Either no active or inappropriate weight control (i.e., trying to gain weight in obese individuals was considered to be unhealthy patterns. Multivariate prevalence ratios were calculated using log-binomial regressions. Results: Men had a higher prevalence of weight under-perception (24.5 vs. 11.9% and unhealthy patterns of weight control behavior (57 vs. 40% than women. Low education level was associated with weight under-perception (ptrend = 0.022 in men, ptrend trend trend = 0.047 in men, ptrend Conclusion: Weight perception and weight control behavior significantly varied by gender and SES. Public actions should be directed toward improving perception and behavior of high-risk populations.

  3. Weight loss methods and changes in eating habits among successful weight losers.

    Science.gov (United States)

    Soini, Sirpa; Mustajoki, Pertti; Eriksson, Johan G

    2016-01-01

    Changes in several lifestyle related factors are required for successful long-term weight loss. Identification of these factors is of major importance from a public health point of view. This study was based upon findings from the Finnish Weight Control Registry (FWCR), a web-based registry. In total, 316 people were recruited and 184 met the study inclusion criteria. The aims of this study were to assess means and typical changes in eating habits associated with successful long-term weight loss. Half of the participants (48%) reported that they lost weight slowly primarily with dietary changes. Self-weighing frequency was high, 92% was weighing themselves at least once a week during the weight loss phase, and 75% during the maintenance phase. Dietary aspects associated with successful weight loss and weight maintenance included an increase in intake of vegetables, a reduction in frequency of eating candies and fast food, regular meal frequency and application of the Plate model. Both slow and fast weight loss may lead to successful long-term results and weight maintenance. A decrease in energy intake was achieved by reducing intake of energy-dense food, applying the Plate model and by regular meal frequency. Key messages Successful long-term weight loss is associated with a reduction in intake of energy-dense food. A more regular meal frequency and a high frequency of self-weighing seem to be helpful.

  4. The Swartkops estuary

    CSIR Research Space (South Africa)

    Baird, D

    1988-01-01

    Full Text Available AND CHEMICAL DATA FOR CRUDE WOOL GREASE' Colour Density (at 15T) Refractive index (40°C) Melting point Free acid content Free alcohol content Iodine value Saponification value Molecular weight Proportion of fatty acids Proportion of alcohols Acids..., sparingly soluble in alcohol and freely soluble in ether and chloroform. Truter' published some physical and chemical data relating to crude wool grease as given in Table 1. Essentially wool grease is a complex mixture of high molecular weight esters...

  5. Economic weights in rabbit meat production

    Directory of Open Access Journals (Sweden)

    L. Cartuche

    2014-09-01

    Full Text Available A profit function was designed for an industrial commercial rabbitry with the most common management in industrial rabbit production. The incomes, costs, and profit function were calculated and economic weights of the traits were estimated. The variable costs (feeding, artificial insemination, health and replacement represented 62% of the total costs, and the fixed costs (labour, utilities, amortisation and administration represented 38% of the total costs. Major costs were feeding of fattening kits and labour cost, at 26% and 18% of the total cost, respectively. The economic weights were feed conversion rate during fattening (–20.2 €/[g feed/g liveweight], number of kits born alive (15.7 €/kit, pregnancy rate (1.7 €/percentage unit, weaning survival (1.7 €/percentage unit, fattening survival (2.0 €/percentage unit, daily feed intake (–0.50 €/(g feed/d, daily gain during fattening (1.33 €/(g weight/d, and replacement rate (–0.29 €/percentage unit. When varying the prices of kg of fattening feed and kg of liveweight, only the economic weights of feed conversion rate during fattening in the first case and the number of kits born alive in the second case changed considerably. Changes in labour cost produced appreciable changes in the whole production cost. Although economic weights are robust to changes in prices, these weights should be recalculated after some generations of selection, because changes in the mean of the traits due to selection can also change economic weights.

  6. Physics of flow in weighted complex networks

    Science.gov (United States)

    Wu, Zhenhua

    This thesis uses concepts from statistical physics to understand the physics of flow in weighted complex networks. The traditional model for random networks is the Erdoḧs-Renyi (ER.) network, where a network of N nodes is created by connecting each of the N(N - 1)/2 pairs of nodes with a probability p. The degree distribution, which is the probability distribution of the number of links per node, is a Poisson distribution. Recent studies of the topology in many networks such as the Internet and the world-wide airport network (WAN) reveal a power law degree distribution, known as a scale-free (SF) distribution. To yield a better description of network dynamics, we study weighted networks, where each link or node is given a number. One asks how the weights affect the static and the dynamic properties of the network. In this thesis, two important dynamic problems are studied: the current flow problem, described by Kirchhoff's laws, and the maximum flow problem, which maximizes the flow between two nodes. Percolation theory is applied to these studies of the dynamics in complex networks. We find that the current flow in disordered media belongs to the same universality class as the optimal path. In a randomly weighted network, we identify the infinite incipient percolation cluster as the "superhighway", which contains most of the traffic in a network. We propose an efficient strategy to improve significantly the global transport by improving the superhighways, which comprise a small fraction of the network. We also propose a network model with correlated weights to describe weighted networks such as the WAN. Our model agrees with WAN data, and provides insight into the advantages of correlated weights in networks. Lastly, the upper critical dimension is evaluated using two different numerical methods, and the result is consistent with the theoretical prediction.

  7. Small Worldness in Dense and Weighted Connectomes

    Science.gov (United States)

    Colon-Perez, Luis; Couret, Michelle; Triplett, William; Price, Catherine; Mareci, Thomas

    2016-05-01

    The human brain is a heterogeneous network of connected functional regions; however, most brain network studies assume that all brain connections can be described in a framework of binary connections. The brain is a complex structure of white matter tracts connected by a wide range of tract sizes, which suggests a broad range of connection strengths. Therefore, the assumption that the connections are binary yields an incomplete picture of the brain. Various thresholding methods have been used to remove spurious connections and reduce the graph density in binary networks. But these thresholds are arbitrary and make problematic the comparison of networks created at different thresholds. The heterogeneity of connection strengths can be represented in graph theory by applying weights to the network edges. Using our recently introduced edge weight parameter, we estimated the topological brain network organization using a complimentary weighted connectivity framework to the traditional framework of a binary network. To examine the reproducibility of brain networks in a controlled condition, we studied the topological network organization of a single healthy individual by acquiring 10 repeated diffusion-weighted magnetic resonance image datasets, over a one-month period on the same scanner, and analyzing these networks with deterministic tractography. We applied a threshold to both the binary and weighted networks and determined that the extra degree of freedom that comes with the framework of weighting network connectivity provides a robust result as any threshold level. The proposed weighted connectivity framework provides a stable result and is able to demonstrate the small world property of brain networks in situations where the binary framework is inadequate and unable to demonstrate this network property.

  8. Fatty acid composition of adipose tissue triglycerides after weight loss and weight maintenance

    DEFF Research Database (Denmark)

    Kunešová, M; Hlavatý, P; Tvrzická, E

    2012-01-01

    Fatty acid composition of adipose tissue changes with weight loss. Palmitoleic acid as a possible marker of endogenous lipogenesis or its functions as a lipokine are under debate. Objective was to assess the predictive role of adipose triglycerides fatty acids in weight maintenance in participants...... of the DIOGENES dietary intervention study. After an 8-week low calorie diet (LCD) subjects with > 8 % weight loss were randomized to 5 ad libitum weight maintenance diets for 6 months: low protein (P)/low glycemic index (GI) (LP/LGI), low P/high GI (LP/HGI), high P/low GI (HP/LGI), high P/high GI (HP....../HGI), and a control diet. Fatty acid composition in adipose tissue triglycerides was determined by gas chromatography in 195 subjects before the LCD (baseline), after LCD and weight maintenance. Weight change after the maintenance phase was positively correlated with baseline adipose palmitoleic (16:1n-7...

  9. Relationship between perilipin gene polymorphisms and body weight and body composition during weight loss and weight maintenance.

    Science.gov (United States)

    Soenen, Stijn; Mariman, Edwin C M; Vogels, Neeltje; Bouwman, Freek G; den Hoed, Marcel; Brown, Louise; Westerterp-Plantenga, Margriet S

    2009-03-23

    Genetic variation in the perilipin (PLIN) gene may play a role in the etiology and treatment of obesity. To examine different polymorphisms in the PLIN gene in relation to body-weight regulation. 118 subjects followed a 6 wk VLCD, followed by 1 year weight maintenance. Body-weight (BW), body composition, leptin concentration, and polymorphisms of the PLIN gene: PLIN1:rs2289487, PLIN4:rs894160, PLIN6:rs1052700, PLIN5:rs2304795 and PLIN7:rs 2304796 were determined. BW loss during VLCD was 7.0+/-3.1 kg (p0.9, r2=0.72; PLIN5 and PLIN7: D' >0.9, r2=0.85. In men, body weight, BMI, waist circumference, body fat, leptin concentrations were significantly lower for the haplotype of PLIN1 (C-alleles) and PLIN4 (A-alleles). In women weight loss and loss of fat mass were larger for the haplotype of PLIN1 (C-alleles) and PLIN4 (A-alleles). For PLIN6 genotypes body weight and body fat were lower for homozygotes of the minor allele (T/T) in the men; in the women leptin concentrations were lower. The haplotype of PLIN5 and PLIN7 consisting of A/G and G/G of PLIN5 and A/A of PLIN7 showed a reduction in FM: 5.9+/-0.6 kg vs 3.1+/-0.4 kg, % body fat: 5.5+/-0.6% vs 2.2+/-0.2%, and leptin: 20.5+/-10.8 ng/ml vs 12.9+/-6.7 ng/ml over time in the women (pinfluencer of obesity risk in humans.

  10. Demographic, Psychological, and Weight-Related Correlates of Weight Control Behaviors Among Active Duty Military Personnel

    Science.gov (United States)

    2007-03-01

    model of bulimia nervosa: Evidence for restrained-eating and affect-regulation mechanisms. Journal of Social and Clinical Psychology , 15, 340-363...DATE MAR 2007 2. REPORT TYPE 3. DATES COVERED 00-00-2007 to 00-00-2007 4. TITLE AND SUBTITLE Demographic, Psychological , and Weight-Related...weigh-in/physical fitness testing. Both weight-related factors and psychological factors were associated with increased odds of engaging in weight

  11. Employee weight management through health coaching.

    Science.gov (United States)

    Merrill, R M; Aldana, S G; Bowden, D E

    2010-01-01

    This study will evaluate the effectiveness of an interactive health coaching intervention at lowering weight. The study involved 5405 overweight or obese employees aged 18-85, who entered the program sometime during 2001-2008. Average body mass index (BMI) significantly decreased from 32.1 at baseline to 31.4 at 3 months, 31.0 at 6 months, and 30.6 at 12 months. Decreasing BMI was more pronounced in older age groups and among women, those using weight loss medication, those with higher BMI, and those with higher motivation and confidence to make behavior changes. When the effects of these variables on the decreasing trend in BMI were simultaneously estimated, only baseline classifications of BMI, health status, and confidence remained significant. Change in BMI through 12 months was -0.7% for those with normal weight, -2.0% for overweight, -3.6% for obese, and -7.1% for morbidly obese individuals at baseline. Among morbidly obese individuals, decrease in BMI through 12 months was -7.6% for those with "high" confidence to lose weight at baseline vs -4.4% for those with low confidence. Better health status at baseline was also related to more pronounced weight loss. Interactive health coaching significantly lowered BMI among participants through 3, 6, and 12 months of follow-up.

  12. Atomic weight of the elements 1981

    International Nuclear Information System (INIS)

    Holden, N.E.; Martin, R.L.

    1983-01-01

    The biennial review of atomic weight, Asub(r)(E), determinations and other cognate data have resulted in the following changes in recommended values (1979 values in parentheses): Hydrogen 1.00794 +- 7 (1.0079 +- 1); Silver 107.8682 +- 3 (107.868 +- 1); Lutetium 174.967 +- 1 (174.967 +- 3). These values are incorporated in the Table of Standard Atomic Weights of the Elements 1981. Whereas in the past, the Table indicated uncertainties as either 1 or 3 in the last place, other single-digit uncertainties will in the future be quoted when there is convincing evidence that by their use, a more precise standard atomic weight can be tabulated. Important changes in annotations and the wording of footnotes to this Table and the Table of Isotopic Compositions are discussed. Changes in Asub(r)(E) values and in their estimated uncertainties in the period since 1969 are analysed. The Report includes for the first time a Table of Atomic Weights abbreviated to five significant figures in the expectation that changes in the tabulated data will rarely be needed. Attention is drawn to the possibility of materials being commercially available containing elements with unusual atomic weights due to the enrichment or depletion of isotopes by free radical magnetic effects. The Relative Atomic Masses for Selected Radioisotopes are also tabulated. (author)

  13. Grain weight improvement in wheat through irradiation

    International Nuclear Information System (INIS)

    Rasal, P.N.; Gadekar, D.A.; Gavhane, V.N.; Bhoite, K.D.

    2006-01-01

    T. aestivum wheat variety NIAW 34 was developed by Agricultural Research Station, Niphad, and was released by Central Varietal Release Committee, for cultivation under irrigated late sown conditions of Peninsular Zone. The grains of NIAW 34 are medium sized with 40g 1000 grain weight. However, in market the bold sized grains (above 40g 1000 grain weight) are preferred by the traders and consumers. To overcome this lacuna, grains of wheat variety NIAW 34 were irradiated to exploit the possibilities of improvement in test weight. The material was irradiated with 15 and 20 kr dose of gamma rays. In M2 generation, mutants for various morphological characters were observed. The plants showing vigorous growth habit and desirable morphological characters were selected. These selected plants were studied for grain characters after harvest. On the basis of improved test weight as compared to parental line, selections were effected. The material was advanced to M6 generation and found stable for character of interest. The material selected comprised of total 10 lines showing improved test weight having range of 42-46 g i.e. increase of 4-6 g over the parental line NIAW 34. The lines selected are being evaluated in yield evaluation trials during Rabi 2006-07. Amongst the doses used, frequency of desired mutants was higher in treatment, of 15 kr

  14. Weight and type 2 diabetes: new recommendations.

    Science.gov (United States)

    Gómez Huelgas, Ricardo

    2016-11-01

    Most patients with type 2 diabetes have excess adiposity. There is wide consensus that adequate treatment of type 2 diabetes requires a simultaneous approach to overweight/obesity and the remaining cardiovascular risk factors. Non-pharmacological interventions (diet, exercise) represent the cornerstone of the treatment of patients with type 2 diabetes. Weight loss through lifestyle modification has shown clear benefits in these patients, requiring an individualised and multidisciplinary approach with structured programmes endowed with specific resources. The weight gain associated with some antidiabetic drugs (secretagogues, glitazones, insulin) can hamper glycaemic control, compromising treatment adherence, worsening vascular risk profile, and limiting the benefits of treatment. Therefore, the current tendency is to adopt a weight-centred approach to the treatment of type 2 diabetes, giving priority to those antidiabetic drugs that have a neutral effect on weight or that favour weight loss (metformin, incretin therapies, sodium-glucose cotransporter-2 inhibitors). Metabolic surgery is an effective alternative for patients with type 2 diabetes and a BMI ≥35 kg/m 2 and allows remission of diabetes in a large proportion of patients, especially if the disease is not very advanced. A consensus document supported by various Spanish scientific societies has recently been published. This document makes a series of specific recommendations on the diagnostic and therapeutic approach to patients with diabetes and obesity. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

  15. The Economic Impact of Weight Regain

    Directory of Open Access Journals (Sweden)

    Caroline E. Sheppard

    2013-01-01

    Full Text Available Background. Obesity is well known for being associated with significant economic repercussions. Bariatric surgery is the only evidence-based solution to this problem as well as a cost-effective method of addressing the concern. Numerous authors have calculated the cost effectiveness and cost savings of bariatric surgery; however, to date the economic impact of weight regain as a component of overall cost has not been addressed. Methods. The literature search was conducted to elucidate the direct costs of obesity and primary bariatric surgery, the rate of weight recidivism and surgical revision, and any costs therein. Results. The quoted cost of obesity in Canada was $2.0 billion–$6.7 billion in 2013 CAD. The median percentage of bariatric procedures that fail due to weight gain or insufficient weight loss is 20% (average: 21.1%±10.1%, range: 5.2–39, n=10. Revision of primary surgeries on average ranges from 2.5% to 18.4%, and depending on the procedure accounts for an additional cost between $14,000 and $50,000 USD per patient. Discussion. There was a significant deficit of the literature pertaining to the cost of revision surgery as compared with primary bariatric surgery. As such, the cycle of weight recidivism and bariatric revisions has not as of yet been introduced into any previous cost analysis of bariatric surgery.

  16. Asymmetry and coherence weight of quantum states

    Science.gov (United States)

    Bu, Kaifeng; Anand, Namit; Singh, Uttam

    2018-03-01

    The asymmetry of quantum states is an important resource in quantum information processing tasks such as quantum metrology and quantum communication. In this paper, we introduce the notion of asymmetry weight—an operationally motivated asymmetry quantifier in the resource theory of asymmetry. We study the convexity and monotonicity properties of asymmetry weight and focus on its interplay with the corresponding semidefinite programming (SDP) forms along with its connection to other asymmetry measures. Since the SDP form of asymmetry weight is closely related to asymmetry witnesses, we find that the asymmetry weight can be regarded as a (state-dependent) asymmetry witness. Moreover, some specific entanglement witnesses can be viewed as a special case of an asymmetry witness—which indicates a potential connection between asymmetry and entanglement. We also provide an operationally meaningful coherence measure, which we term coherence weight, and investigate its relationship to other coherence measures like the robustness of coherence and the l1 norm of coherence. In particular, we show that for Werner states in any dimension d all three coherence quantifiers, namely, the coherence weight, the robustness of coherence, and the l1 norm of coherence, are equal and are given by a single letter formula.

  17. Examining the Weight Trajectory of College Students.

    Science.gov (United States)

    Pope, Lizzy; Hansen, Danielle; Harvey, Jean

    2017-02-01

    To examine the weight trajectory of students over 4 years of college. Anthropometric assessments were completed at the beginning and end of students' freshman year and the end of senior year to calculate body mass index. Questionnaires assessing weight-related behaviors were completed in senior year. Of the original 117 students, 86 remained in the study for 4 years. Body mass index was significantly higher at the end of senior year (mean, 24.84; SD, 4.46) vs the beginning of freshman year (mean, 23.59; SD, 4.01; t[85] = 5.61; P Students' mean weight gain was 4.38 kg and the sample increased from 23% to 41% overweight/obese. No significant associations were found between BMI and lifestyle factors. This study suggests that students gain weight throughout college, which highlights the need for weight control interventions to target more than just freshman college students. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  18. Iris Matching Based on Personalized Weight Map.

    Science.gov (United States)

    Dong, Wenbo; Sun, Zhenan; Tan, Tieniu

    2011-09-01

    Iris recognition typically involves three steps, namely, iris image preprocessing, feature extraction, and feature matching. The first two steps of iris recognition have been well studied, but the last step is less addressed. Each human iris has its unique visual pattern and local image features also vary from region to region, which leads to significant differences in robustness and distinctiveness among the feature codes derived from different iris regions. However, most state-of-the-art iris recognition methods use a uniform matching strategy, where features extracted from different regions of the same person or the same region for different individuals are considered to be equally important. This paper proposes a personalized iris matching strategy using a class-specific weight map learned from the training images of the same iris class. The weight map can be updated online during the iris recognition procedure when the successfully recognized iris images are regarded as the new training data. The weight map reflects the robustness of an encoding algorithm on different iris regions by assigning an appropriate weight to each feature code for iris matching. Such a weight map trained by sufficient iris templates is convergent and robust against various noise. Extensive and comprehensive experiments demonstrate that the proposed personalized iris matching strategy achieves much better iris recognition performance than uniform strategies, especially for poor quality iris images.

  19. Global warming: is weight loss a solution?

    Science.gov (United States)

    Gryka, A; Broom, J; Rolland, C

    2012-03-01

    The current climate change has been most likely caused by the increased greenhouse gas emissions. We have looked at the major greenhouse gas, carbon dioxide (CO(2)), and estimated the reduction in the CO(2) emissions that would occur with the theoretical global weight loss. The calculations were based on our previous weight loss study, investigating the effects of a low-carbohydrate diet on body weight, body composition and resting metabolic rate of obese volunteers with type 2 diabetes. At 6 months, we observed decreases in weight, fat mass, fat free mass and CO(2) production. We estimated that a 10 kg weight loss of all obese and overweight people would result in a decrease of 49.560 Mt of CO(2) per year, which would equal to 0.2% of the CO(2) emitted globally in 2007. This reduction could help meet the CO(2) emission reduction targets and unquestionably would be of a great benefit to the global health.

  20. High-frequency binge eating predicts weight gain among veterans receiving behavioral weight loss treatments.

    Science.gov (United States)

    Masheb, Robin M; Lutes, Lesley D; Kim, Hyungjin Myra; Holleman, Robert G; Goodrich, David E; Janney, Carol A; Kirsh, Susan; Richardson, Caroline R; Damschroder, Laura J

    2015-01-01

    To assess for the frequency of binge eating behavior and its association with weight loss in an overweight/obese sample of veterans. This study is a secondary analysis of data from the ASPIRE study, a randomized effectiveness trial of weight loss among veterans. Of the 481 enrolled veterans with overweight/obesity, binge eating frequency was obtained by survey for 392 (82%). The majority (77.6%) reported binge eating, and 6.1% reported high-frequency binge eating. Those reporting any binge eating lost 1.4% of body weight, decreased waist circumference by 2.0 cm, and had significantly worse outcomes than those reporting never binge eating who lost about double the weight (2.7%) and reduced waist circumference by twice as much (4.2 cm). The high-frequency binge group gained 1.4% of body weight and increased waist circumference by 0.3 cm. High rates of binge eating were observed in an overweight/obese sample of veterans enrolled in weight loss treatment. The presence of binge eating predicted poorer weight loss outcomes. Furthermore, high-frequency binge eating was associated with weight gain. These findings have operational and policy implications for developing effective strategies to address binge eating in the context of behavioral weight loss programs for veterans. © 2014 The Obesity Society.