Web-based KAP Intervention on Office Ergonomics: A Unique Technique for Prevention of Musculoskeletal Discomfort in Global Corporate Offices.

Science.gov (United States)

Madhwani, Kishore P; Nag, P K

2017-01-01

The purpose of this study was to evaluate web-based Knowledge, Attitude and Practice (KAP) intervention on office ergonomics - a unique method for prevention of musculoskeletal discomfort (MSD) - in corporate offices that influences behavior modification. With the increasing use of computers, laptops and hand-held communication devices globally among office employees, creating awareness on office ergonomics has become a top priority. Emphasis needs to be given on maintaining ideal work postures, ergonomic arrangement of workstations, optimizing chair functions, as well as performing desk stretches to reduce MSD arising from the use of these equipment, thereby promoting safe work practices at offices and home, as in the current scenario many employees work from home with flexible work hours. Hence, this justifies the importance of our study. To promote safe working by exploring cost-effective communication methods to achieve behavior change at distant sites when an on-site visit may not be feasible. An invitation was sent by the Medical and Occupational Health Team of a multinational corporation to all employees at their offices in Sri Lanka, Singapore, and Malaysia to take up an online Nordic questionnaire, a screening tool for musculoskeletal symptoms, shared in local languages on two occasions - baseline evaluation ( n = 240) and a follow-up evaluation after 3 months ( n = 203). After completing the baseline questionnaire, employees were immediately trained on correct postures and office ergonomics with animation graphics. The same questionnaire was sent again after a 12-week gap only to those employees who responded to the baseline questionnaire on initial assessment. Data collected were analyzed using the Statistical Package for the Social Sciences (SPSS) version 20.0 software and variables were compared using odds ratio as well as Chi-square test. Of the 203 employees who responded, 47.35% had some musculoskeletal symptoms. Among them 58.7% had lower back pain

Ergonomics in office-based surgery: a survey-guided observational study.

Science.gov (United States)

Esser, Adam C; Koshy, James G; Randle, Henry W

2007-11-01

The practice of office-based surgery is increasing in many specialties. Using Mohs surgery as a model, we investigated the role of ergonomics in office-based surgery to limit work-related musculoskeletal disorders. All Mayo Clinic surgeons currently performing Mohs surgery and Mohs surgeons trained at Mayo Clinic between 1990 and 2004 received a questionnaire survey between May 2003 and September 2004. A sample of respondents were videotaped during surgery. The main outcome measures were survey responses and an ergonomist's identification of potential causes of musculoskeletal disorders. All 17 surgeons surveyed responded. Those surveyed spend a mean of 24 hours per week in surgery. Sixteen said they had symptoms caused by or made worse by performing surgery. Symptom onset occurred on average at age 35.4 years. The most common complaints were pain and stiffness in the neck, shoulders, and lower back and headaches. Videotapes of 6 surgeons revealed problems with operating room setup, awkward posture, forceful exertion, poor positioning, lighting, and duration of procedures. Symptoms of musculoskeletal injuries are common and may begin early in a physician's career. Modifying footwear, flooring, table height, operating position, lighting, and surgical instruments may improve the ergonomics of office-based surgery.

The proactive approach--is it worthwhile? A prospective controlled ergonomic intervention study in office workers.

Science.gov (United States)

Laestadius, Jasminka Goldoni; Ye, Jian; Cai, Xiaodong; Ross, Sandra; Dimberg, Lennart; Klekner, Meg

2009-10-01

Does proactive ergonomics program enhance office worker health and productivity? The investigation was conducted in connection with the move of 1500 office staff to a building with improved ergonomics. It was focused on associations between workstation features, working postures, musculoskeletal pain symptoms, and eye strain before and 18 months after implementation of a proactive ergonomic program. The outcomes were compared between the intervention and a similar reference group. Associations between improvement of postures and less musculoskeletal pain and eye strain were confirmed. A cross association between several features and postures and improved symptoms was noted, along with improved productivity. The study suggests that a proactive program adhering to the OSHA recommendations needs to include an individual workstation assessment to be effective in reducing symptoms and increasing productivity.

PSYCHOPHYSICAL MEASURES FOR EFFICIENT ERGONOMICS IN THE OFFICE

Directory of Open Access Journals (Sweden)

Ana-Cristina LESE

2017-08-01

Full Text Available In the working environment of the modern man, where the junction man-machine is a system that aims at achieving professional success, the ergonomic measures are increasingly promoted. These measures come after waves of complaints from the employees who often accuse psycho-physical fatigue. In this paper we will present a series of psychophysical techniques designed for those employees who work in an office. The examples are built on patterns existing in the physical exercise practice and mental theatre training used by some of the greatest teachers of theatre in the world. Alternating these types of physical and mental exercises, adapted for office work, can visibly improve the health of the employees

Anthropometric change: implications for office ergonomics.

Science.gov (United States)

Gordon, Claire C; Bradtmiller, Bruce

2012-01-01

Well-designed office workspaces require good anthropometric data in order to accommodate variability in the worker population. The recent obesity epidemic carries with it a number of anthropometric changes that have significant impact on design. We examine anthropometric change among US civilians over the last 50 years, and then examine that change in a subset of the US population--the US military--as military data sets often have more ergonomic dimensions than civilian ones. The civilian mean stature increased throughout the period 1962 to 2006 for both males and females. However, the rate of increase in mean weight was considerably faster. As a result, the male obesity rate changed from 10.7% in 1962 to 31.3% in 2006. The female change for the same period was 15.8% to 33.2%. In the Army, the proportion of obesity increased from 3.6% to 20.9%, in males. In the absence of national US ergonomic data, we demonstrate one approach to tracking civilian change in these dimensions, applying military height/weight regression equations to the civilian population estimates. This approach is useful for population monitoring but is not suitable for establishing new design limits, as regression estimates likely underestimate the change at the ends of the distribution.

The effects of an office ergonomics training and chair intervention on worker knowledge, behavior and musculoskeletal risk.

Science.gov (United States)

Robertson, Michelle; Amick, Benjamin C; DeRango, Kelly; Rooney, Ted; Bazzani, Lianna; Harrist, Ron; Moore, Anne

2009-01-01

A large-scale field intervention study was undertaken to examine the effects of office ergonomics training coupled with a highly adjustable chair on office workers' knowledge and musculoskeletal risks. Office workers were assigned to one of three study groups: a group receiving the training and adjustable chair (n=96), a training-only group (n=63), and a control group (n=57). The office ergonomics training program was created using an instructional systems design model. A pre/post-training knowledge test was administered to all those who attended the training. Body postures and workstation set-ups were observed before and after the intervention. Perceived control over the physical work environment was higher for both intervention groups as compared to workers in the control group. A significant increase in overall ergonomic knowledge was observed for the intervention groups. Both intervention groups exhibited higher level behavioral translation and had lower musculoskeletal risk than the control group.

Inter-rater reliability of an observation-based ergonomics assessment checklist for office workers.

Science.gov (United States)

Pereira, Michelle Jessica; Straker, Leon Melville; Comans, Tracy Anne; Johnston, Venerina

2016-12-01

To establish the inter-rater reliability of an observation-based ergonomics assessment checklist for computer workers. A 37-item (38-item if a laptop was part of the workstation) comprehensive observational ergonomics assessment checklist comparable to government guidelines and up to date with empirical evidence was developed. Two trained practitioners assessed full-time office workers performing their usual computer-based work and evaluated the suitability of workstations used. Practitioners assessed each participant consecutively. The order of assessors was randomised, and the second assessor was blinded to the findings of the first. Unadjusted kappa coefficients between the raters were obtained for the overall checklist and subsections that were formed from question-items relevant to specific workstation equipment. Twenty-seven office workers were recruited. The inter-rater reliability between two trained practitioners achieved moderate to good reliability for all except one checklist component. This checklist has mostly moderate to good reliability between two trained practitioners. Practitioner Summary: This reliable ergonomics assessment checklist for computer workers was designed using accessible government guidelines and supplemented with up-to-date evidence. Employers in Queensland (Australia) can fulfil legislative requirements by using this reliable checklist to identify and subsequently address potential risk factors for work-related injury to provide a safe working environment.

A field intervention examining the impact of an office ergonomics training and a highly adjustable chair on visual symptoms in a public sector organization.

Science.gov (United States)

Amick, Benjamin C; Menéndez, Cammie Chaumont; Bazzani, Lianna; Robertson, Michelle; DeRango, Kelly; Rooney, Ted; Moore, Anne

2012-05-01

Examine the effect of a multi-component office ergonomics intervention on visual symptom reductions. Office workers were assigned to either a group receiving a highly adjustable chair with office ergonomics training (CWT), a training-only group (TO) or a control group (C). A work environment and health questionnaire was administered 2 and 1 month(s) pre-intervention and 3, 6, and 12 months post-intervention. Multi-level statistical models tested hypotheses. The CWT intervention lowered daily visual symptoms (p office ergonomics training had reduced visual symptoms and the effect was maintained through twelve months post-intervention. The lack of a training-only group effect supports implementing training in conjunction with the highly adjustable chair to reduce visual symptoms. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

A replicated field intervention study evaluating the impact of a highly adjustable chair and office ergonomics training on visual symptoms☆

Science.gov (United States)

Menéndez, Cammie Chaumont; Amick, Benjamin C.; Robertson, Michelle; Bazzani, Lianna; DeRango, Kelly; Rooney, Ted; Moore, Anne

2016-01-01

Objective Examine the effects of two office ergonomics interventions in reducing visual symptoms at a private sector worksite. Methods A quasi-experimental study design evaluated the effects of a highly adjustable chair with office ergonomics training intervention (CWT group) and the training only (TO group) compared with no intervention (CO group). Data collection occurred 2 and 1 month(s) pre-intervention and 2, 6 and 12 months post-intervention. During each data collection period, a work environment and health questionnaire (covariates) and daily health diary (outcomes) were completed. Multilevel statistical models tested hypotheses. Results Both the training only intervention (p office ergonomics training alone and coupled with a highly adjustable chair reduced visual symptoms. In replicating results from a public sector worksite at a private sector worksite the external validity of the interventions is strengthened, thus broadening its generalizability. PMID:22030069

Analysis of Workplace Ergonomics on Employee Performance in PT. Bni (Persero) Tbk. Main Branch Office Manado

OpenAIRE

Manggo, Isra

2014-01-01

As the worldwide business competition gets tougher every year, companies have to compound their strategies in keeping their best talents within the organization. One of the essential keys in keeping their best employees is through the consideration of ergonomic aspects for the office design. One of the advantages of following ergonomic workplace is that it aids to minimize the harmful effects of carelessness, damage to equipment, or even injury to death to employees. The main objectives of th...

Bad Enough Ergonomics

Directory of Open Access Journals (Sweden)

Virve Peteri

2017-01-01

Full Text Available The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufacturing process. The article is concerned with how, in the process of producing an office chair, the chair gains an identity of an aesthetic design object and how this comes to mean the reformulation of the idea of ergonomics. The empirical analysis also provides insight into how the somewhat grand discourses of soft capitalism or aesthetic economy are not abstract, but very much grounded in everyday practices of an organization. The article establishes how the vision shared by all the relevant actors invites active, flexible, and cooperative end-users and how the vision also has potential material effects. The research is an ethnographically inspired case study that draws ideas from discursive psychology.

Surgeons’ muscle load during robotic-assisted laparoscopy performed with a regular office chair and the preferred of two ergonomic chairs

DEFF Research Database (Denmark)

Dalager, T.; Jensen, P. T.; Winther, T. S.

2018-01-01

associated with poor ergonomics and musculoskeletal pain. The ergonomic condition in the robotic console is partially dependent upon the chair provided, which often is a regular office chair. Our study quantified and compared the muscular load during robotic-assisted laparoscopy using one of two custom built...

Ergonomic Product Design 21

International Nuclear Information System (INIS)

Kwon, Yeong Guk

1996-09-01

This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

A field intervention examining the impact of an office ergonomics training and a highly adjustable chair on visual symptoms in a public sector organization

Science.gov (United States)

Amick, Benjamin C.; Menéndez, Cammie Chaumont; Bazzani, Lianna; Robertson, Michelle; DeRango, Kelly; Rooney, Ted; Moore, Anne

2016-01-01

Objective Examine the effect of a multi-component office ergonomics intervention on visual symptom reductions. Methods Office workers were assigned to either a group receiving a highly adjustable chair with office ergonomics training (CWT), a training-only group (TO) or a control group (C). A work environment and health questionnaire was administered 2 and 1 month(s) pre-intervention and 3, 6, and 12 months post-intervention. Multi-level statistical models tested hypotheses. Results The CWT intervention lowered daily visual symptoms (p ergonomics training had reduced visual symptoms and the effect was maintained through twelve months post-intervention. The lack of a training-only group effect supports implementing training in conjunction with the highly adjustable chair to reduce visual symptoms. PMID:21963250

Effects of participatory ergonomic intervention on the development of upper extremity musculoskeletal disorders and disability in office employees using a computer.

Science.gov (United States)

Baydur, Hakan; Ergör, Alp; Demiral, Yücel; Akalın, Elif

2016-06-16

To evaluate the participatory ergonomic method on the development of upper extremity musculoskeletal disorders and disability in office employees. This study is a randomized controlled intervention study. It comprised 116 office workers using computers. Those in the intervention group were taught office ergonomics and the risk assessment method. Cox proportional hazards model and generalized estimating equations (GEEs) were used. In the 10-month postintervention follow-up, the possibility of developing symptoms was 50.9%. According to multivariate analysis results, the possibility of developing symptoms on the right side of the neck and in the right wrist and hand was significantly less in the intervention group than in the control group (pergonomic intervention decreases the possibility of musculoskeletal complaints and disability/symptom level in office workers.

Differences in ergonomic and workstation factors between computer office workers with and without reported musculoskeletal pain.

Science.gov (United States)

Rodrigues, Mirela Sant'Ana; Leite, Raquel Descie Veraldi; Lelis, Cheila Maira; Chaves, Thaís Cristina

2017-01-01

Some studies have suggested a causal relationship between computer work and the development of musculoskeletal disorders. However, studies considering the use of specific tools to assess workplace ergonomics and psychosocial factors in computer office workers with and without reported musculoskeletal pain are scarce. The aim of this study was to compare the ergonomic, physical, and psychosocial factors in computer office workers with and without reported musculoskeletal pain (MSP). Thirty-five computer office workers (aged 18-55 years) participated in the study. The following evaluations were completed: Rapid Upper Limb Assessment (RULA), Rapid Office Strain Assessment (ROSA), and Maastricht Upper Extremity Questionnaire revised Brazilian Portuguese version (MUEQ-Br revised). Student t-tests were used to make comparisons between groups. The computer office workers were divided into two groups: workers with reported MSP (WMSP, n = 17) and workers without positive report (WOMSP, n = 18). Those in the WMSP group showed significantly greater mean values in the total ROSA score (WMSP: 6.71 [CI95% :6.20-7.21] and WOMSP: 5.88 [CI95% :5.37-6.39], p = 0.01). The WMSP group also showed higher scores in the chair section of the ROSA, workstation of MUEQ-Br revised, and in the upper limb RULA score. The chair height and armrest sections from ROSA showed the higher mean values in workers WMSP compared to workers WOMSP. A positive moderate correlation was observed between ROSA and RULA total scores (R = 0.63, p ergonomics indexes for chair workstation and worse physical risk related to upper limb (RULA upper limb section) than workers without pain. However, there were no observed differences in workers with and without MSP regarding work-related psychosocial factors. The results suggest that inadequate workstation conditions, specifically the chair height, arm and back rest, are linked to improper upper limb postures and that these factors are contributing to

A replicated field intervention study evaluating the impact of a highly adjustable chair and office ergonomics training on visual symptoms.

Science.gov (United States)

Menéndez, Cammie Chaumont; Amick, Benjamin C; Robertson, Michelle; Bazzani, Lianna; DeRango, Kelly; Rooney, Ted; Moore, Anne

2012-07-01

Examine the effects of two office ergonomics interventions in reducing visual symptoms at a private sector worksite. A quasi-experimental study design evaluated the effects of a highly adjustable chair with office ergonomics training intervention (CWT group) and the training only (TO group) compared with no intervention (CO group). Data collection occurred 2 and 1 month(s) pre-intervention and 2, 6 and 12 months post-intervention. During each data collection period, a work environment and health questionnaire (covariates) and daily health diary (outcomes) were completed. Multilevel statistical models tested hypotheses. Both the training only intervention (poffice ergonomics training alone and coupled with a highly adjustable chair reduced visual symptoms. In replicating results from a public sector worksite at a private sector worksite the external validity of the interventions is strengthened, thus broadening its generalizability. Published by Elsevier Ltd.

Psychosocial and ergonomic survey of office and field jobs in a utility company.

Science.gov (United States)

Coelho, Denis A; Tavares, Carla S D; Lima, Tânia M; Lourenço, Miguel L

2017-08-04

The effect of different kinds of work on the psychosocial assessment of workers under the same management and organizational environment is investigated. A voluntary assessment in a utility company was carried out using the short version of the Copenhagen psychosocial questionnaire (CoPsoQ) on two occasions, 1.5 years apart. Initially, 25 office workers (11 men and 14 women) participated, while 14 of those workers (8 women and 6 men) participated in the second assessment together with 32 field workers. The sewage, water treatment and maintenance workers, totaling 32 men, also participated in a field ergonomics assessment using the Washington State Department of Labor and Industries field work ergonomic checklist. The longitudinal outlook was fairly stable, with sustained severe scores in many CoPsoQ subscales and intensification of severity of workers' control over work and esteem for men. A significantly higher esteem score resulted for field rather than office workers. Workers subjected to foul odors showed similar severity of psychosocial factors. For most psychosocial dimensions, the organizational design and management system in place, as well as the overall cultural environment in which it operates, create a much stronger and more decisive impact than job-specific factors.

28 CFR 90.19 - State office.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false State office. 90.19 Section 90.19...¢ Training ⢠Officers ⢠Prosecutors) Violence Against Women Formula Grant Program § 90.19 State office. (a... office for the purposes of: (1) Certifying qualifications for funding under this subpart B; (2...

Development and evaluation of an office ergonomic risk checklist: ROSA--rapid office strain assessment.

Science.gov (United States)

Sonne, Michael; Villalta, Dino L; Andrews, David M

2012-01-01

The Rapid Office Strain Assessment (ROSA) was designed to quickly quantify risks associated with computer work and to establish an action level for change based on reports of worker discomfort. Computer use risk factors were identified in previous research and standards on office design for the chair, monitor, telephone, keyboard and mouse. The risk factors were diagrammed and coded as increasing scores from 1 to 3. ROSA final scores ranged in magnitude from 1 to 10, with each successive score representing an increased presence of risk factors. Total body discomfort and ROSA final scores for 72 office workstations were significantly correlated (R = 0.384). ROSA final scores exhibited high inter- and intra-observer reliability (ICCs of 0.88 and 0.91, respectively). Mean discomfort increased with increasing ROSA scores, with a significant difference occurring between scores of 3 and 5 (out of 10). A ROSA final score of 5 might therefore be useful as an action level indicating when immediate change is necessary. ROSA proved to be an effective and reliable method for identifying computer use risk factors related to discomfort. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Effects of participatory ergonomic intervention on the development of upper extremity musculoskeletal disorders and disability in office employees using a computer

Science.gov (United States)

Baydur, Hakan; Ergör, Alp; Demiral, Yücel; Akalın, Elif

2016-01-01

Objective: To evaluate the participatory ergonomic method on the development of upper extremity musculoskeletal disorders and disability in office employees. Methods: This study is a randomized controlled intervention study. It comprised 116 office workers using computers. Those in the intervention group were taught office ergonomics and the risk assessment method. Cox proportional hazards model and generalized estimating equations (GEEs) were used. Results: In the 10-month postintervention follow-up, the possibility of developing symptoms was 50.9%. According to multivariate analysis results, the possibility of developing symptoms on the right side of the neck and in the right wrist and hand was significantly less in the intervention group than in the control group (pergonomic intervention decreases the possibility of musculoskeletal complaints and disability/symptom level in office workers. PMID:27108647

A multimedia case based approach to the study of office ergonomics.

Science.gov (United States)

August-Dalfen, Sharon; Snider, Laurie

2003-01-01

Multimedia technology has the capacity to provide students with an interactive approach to problem based learning and to bridge the gap between theoretical knowledge and clinical practice. The present paper describes the design and development of the program ErgoROM, a CD which presents a case study to assist occupational therapy students in their studies of office ergonomics. A pilot study showed that overall, 91% of respondents rated the ErgoROM as either "Excellent" or "Very Good". Additionally they reported that ErgoROM had a positive impact on active learning and critical thinking.

Ergonomics in Dentistry

Directory of Open Access Journals (Sweden)

Dargahi H

2010-01-01

Full Text Available Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materials and Methods: This study reviewed the role and effectiveness of Ergonomics in dental profession. We used related journals, books and ergonomics websites to write this article. Conclusion: Many of researchers believe that awkward body posture and low movement are the sources of occupational disorders. Therefore, knowledge of ergonomics risk factors in dental office design is very important. Dentist's body posture and dental equipment evaluations are important factors in dental ergonomics. The most logical approach to design dental equipment for utilizing ergonomics principles is consideration of the dentist posture and type of movements and activities. In conclusion, dentists should be informed about dental ergonomics regulation and its different aspects. Furthermore, academic developments and research projects can be useful in this area.

2017 Laser Diagnostics in Combustion GRC/GRS

Science.gov (United States)

2017-10-06

scientists and engineers . The goal of GRC was to bring together scientists and engineers with a strong interest in laser-based combustion diagnostics to...processes. The GRS, held the weekend before the GRC, was organized to bring together emerging leaders in the field at an early stage in their careers ...coupled multi-scale combustion processes. The GRC on Laser Diagnostics in Combustion was designed to bring together scientists and engineers working at

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

Science.gov (United States)

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

Comfortable mobile offices: A literature review of the ergonomic aspects of mobile device use in transportation settings.

Science.gov (United States)

Kamp, I; Van Veen, S A T; Vink, P

2015-01-01

The use of mobile devices as an addition to or replacement of desktop computers for traditional office work results in more flexibility of workplaces. Consequently transportation time is used for office work and this asks for comfortable mobile offices. The aim of this review is providing a framework of the relevant elements for comfortable mobile offices and defining needs for future research. This literature review draws on 68 papers, theses, reviews and critiques. The framework is based on existing literature on traditional office ergonomics and comfort literature for different transportation modes like trains, buses, airplanes and cars. The main differences with traditional offices are the type of devices, dynamic versus static situation, the sole use of mobile devices and therefore the need for a good arm support to avoid an uncomfortable neck flexion, limited space, and the presence of strangers which influence the privacy perception. Important topics for future research are: the effect on the employee and the environment of the ability and demand of working anywhere, and the requirements for the physical aspects of mobile offices.

Conditions that influence the elimination of postural constraints after office employees working with VDU have received ergonomics training.

Science.gov (United States)

Montreuil, Sylvie; Laflamme, Lucie; Brisson, Chantal; Teiger, Catherine

2006-01-01

The goal of this article is to better understand how preventive measures are undertaken after training. It examines how certain variables, such as musculoskeletal pain, participant age and workstation and work content characteristics influence the reduction of postural constraints after office employees working with a computer have received ergonomics training. A pre-test/post-test design was used. The 207 female office workers were given 6 hours of ergonomics training. The variables were determined using a self-administered questionnaire and an observation grid filled out 2 weeks before and 6 months after the training session. The FAC and HAC were used in the data processing. The presence or absence of musculoskeletal pain had no statistically significant influence on whether or not postural constraints were eliminated. The age of the participants and the possibility of adjusting the workstation characteristics and work content produced differentiated results with regard to postural constraint reduction. We concluded that trained people succeed in taking relevant and effective measures to reduce the postural constraints found in VDUs. However other measures than work station adjustments lead to this prevention and such training must be strongly supported by the various hierarchical levels of an enterprise or an institution.

Improving office work: A participatory ergonomic experiment in a naturalistic setting

NARCIS (Netherlands)

Vink, P.; Kompier, M.A.J.

1997-01-01

In a Department of Salary Records where VDU tasks were performed at a high work rate, a participative ergonomic study was undertaken. First, the 'old' workplace was investigated for all 45 employees. Work stations appeared to be of poor ergonomic quality. Second, 12 employees participated in an

Auxiliary office chair

OpenAIRE

Pascual Osés, Maite

2007-01-01

The aim of this project is to develop an auxiliary office chair, which favorably will compete with the existing chairs on the market. Evolutions of ergonomical survey in the work environment and on the configuration of offices require new products which fulfill the requirements properly. In order to achieve it a survey about office chairs has been carried out: types, characteristics, ways of usage and products on the market besides a large antropometrical study and ergonomics related to work ...

Photograph-based ergonomic evaluations using the Rapid Office Strain Assessment (ROSA).

Science.gov (United States)

Liebregts, J; Sonne, M; Potvin, J R

2016-01-01

The Rapid Office Strain Assessment (ROSA) was developed to assess musculoskeletal disorder (MSD) risk factors for computer workstations. This study examined the validity and reliability of remotely conducted, photo-based assessments using ROSA. Twenty-three office workstations were assessed on-site by an ergonomist, and 5 photos were obtained. Photo-based assessments were conducted by three ergonomists. The sensitivity and specificity of the photo-based assessors' ability to correctly classify workstations was 79% and 55%, respectively. The moderate specificity associated with false positive errors committed by the assessors could lead to unnecessary costs to the employer. Error between on-site and photo-based final scores was a considerable ∼2 points on the 10-point ROSA scale (RMSE = 2.3), with a moderate relationship (ρ = 0.33). Interrater reliability ranged from fairly good to excellent (ICC = 0.667-0.856) and was comparable to previous results. Sources of error include the parallax effect, poor estimations of small joint (e.g. hand/wrist) angles, and boundary errors in postural binning. While this method demonstrated potential validity, further improvements should be made with respect to photo-collection and other protocols for remotely-based ROSA assessments. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Office Computers: Ergonomic Considerations.

Science.gov (United States)

Ganus, Susannah

1984-01-01

Each new report of the office automation market indicates technology is overrunning the office. The impacts of this technology are described and some ways to manage and physically "soften" the change to a computer-based office environment are suggested. (Author/MLW)

Ergonomic risk: social representations of dental students

Directory of Open Access Journals (Sweden)

Luana Kelle Batista Moura

2014-01-01

Full Text Available Objective: To learn the social representations of ergonomic risk prepared ​​by dental students. Methodology: This exploratory study, subsidized the Theory of Social Representations, with 64 dental students of an educational institution, by means of interviews. The data were processed in Alceste4.8 and lexical analysis done by the descending hierarchical classification. Results: In two categories: knowledge about exposure to ergonomic risk end attitude of students on preventing and treating injuries caused by repetitive motion. For students, the ergonomic risk is related to the attitude in the dental office. Conclusion: Prevention of ergonomic risk for dental students has not been incorporated as a set of necessary measures for their health and the patients, to prevent ergonomic hazards that can result in harm to the patient caused by work-related musculoskeletal disorder, which is reflected in a lower quality practice.

Applying research to practice: generalist and specialist (visual ergonomics) consultancy.

Science.gov (United States)

Long, Jennifer; Long, Airdrie

2012-01-01

Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants--generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.

The effects of office ergonomic training on musculoskeletal complaints, sickness absence, and psychological well-being: a cluster randomized control trial.

Science.gov (United States)

Mahmud, Norashikin; Kenny, Dianna T; Md Zein, Raemy; Hassan, Siti Nurani

2015-03-01

This study explored whether musculoskeletal complaints can be reduced by the provision of ergonomics education. A cluster randomized controlled trial study was conducted in which 3 units were randomized to intervention and received training and 3 units were given a leaflet. The effect of intervention on knowledge, workstation practices, musculoskeletal complaints, sickness absence, and psychological well-being were assessed at 6 and 12 months. Although there was no increment of knowledge among workers, significant improvements in workstation practices in the use of monitor, keyboard, and chair were observed. There were significant reductions in neck and upper and lower back complaints among workers but these did not translate into fewer days lost from work. Workers' stress was found to be significantly reduced across the studies. In conclusion, office ergonomics training can be beneficial in reducing musculoskeletal risks and stress among workers. © 2011 APJPH.

Advanced Stirling Convertor Testing at GRC

Science.gov (United States)

Schifer, Nick; Oriti, Salvatore M.

2013-01-01

NASA Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance testing of the Advanced Stirling Convertor (ASC). The latest version of the ASC, deemed ASC-E3, is of a design identical to the forthcoming flight convertors. The first pair of ASC-E3 units was delivered in December 2012. GRC has begun the process of adding these units to the catalog of ongoing Stirling convertor operation. This process includes performance verification, which examines the data from various tests to validate the convertors performance to the product specification.

Assessment of risk factors for musculoskeletal disorders using the Rapid Office Strain Assessment (ROSA Method and implementing ergonomics intervention programs in Sepah Bank

Directory of Open Access Journals (Sweden)

I. Nasiri

2015-07-01

.Conclusion: Using the ROSA technique was seemed to be beneficialto assess the ergonomic risk factors of office works, and the deficiencies in the workstation can be identified through this method. Moreover,by design and implementation of an educational intervention program along with engineering interventions which comply with the elements of this technique, the defects can be eliminated.

Stirling technology development at NASA GRC

Science.gov (United States)

Thieme, Lanny G.; Schreiber, Jeffrey G.; Mason, Lee S.

2002-01-01

The Department of Energy, Stirling Technology Company (STC), and NASA Glenn Research Center (GRC) are developing a free-piston Stirling convertor for a high-efficiency Stirling Radioisotope Generator (SRG) for NASA Space Science missions. The SRG is being developed for multimission use, including providing electric power for unmanned Mars rovers and deep space missions. NASA GRC is conducting an in-house technology project to assist in developing the convertor for space qualification and mission implementation. Recent testing of 55-We Technology Demonstration Convertors (TDC's) built by STC includes mapping of a second pair of TDC's, single TDC testing, and TDC electromagnetic interference and electromagnetic compatibility characterization on a non-magnetic test stand. Launch environment tests of a single TDC without its pressure vessel to better understand the convertor internal structural dynamics and of dual-opposed TDC's with several engineering mounting structures with different natural frequencies have recently been completed. A preliminary life assessment has been completed for the TDC heater head, and creep testing of the IN718 material to be used for the flight convertors is underway. Long-term magnet aging tests are continuing to characterize any potential aging in the strength or demagnetization resistance of the magnets used in the linear alternator (LA). Evaluations are now beginning on key organic materials used in the LA and piston/rod surface coatings. GRC is also conducting finite element analyses for the LA, in part to look at the demagnetization margin on the permanent magnets. The world's first known integrated test of a dynamic power system with electric propulsion was achieved at GRC when a Hall-effect thruster was successfully operated with a free-piston Stirling power source. Cleveland State University is developing a multi-dimensional Stirling computational fluid dynamics code to significantly improve Stirling loss predictions and assist in

Update on the NASA GRC Stirling Technology development project

Science.gov (United States)

Thieme, Lanny G.; Schreiber, Jeffrey G.

2001-02-01

The Department of Energy, NASA Glenn Research Center (GRC), and Stirling Technology Company (STC) are developing a free-piston Stirling convertor for a Stirling radioisotope power system (SRPS) to provide spacecraft on-board electric power for NASA deep space missions. The SRPS has recently been identified for potential use on the Europa Orbiter and Solar Probe Space Science missions. Stirling is also now being considered for unmanned Mars rovers. NASA GRC is conducting an in-house project to assist in developing the Stirling convertor for readiness for space qualification and mission implementation. As part of this continuing effort, the Stirling convertor will be further characterized under launch environment random vibration testing, methods to reduce convertor electromagnetic interference (EMI) will be developed, and an independent performance verification will be completed. Convertor life assessment and permanent magnet aging characterization tasks are also underway. Substitute organic materials for the linear alternator and piston bearing coatings for use in a high radiation environment have been identified and have now been incorporated in Stirling convertors built by STC for GRC. Electromagnetic and thermal finite element analyses for the alternator are also being conducted. This paper discusses the recent results and status for this NASA GRC in-house project. .

19 CFR 101.2 - Authority of Customs officers.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Authority of Customs officers. 101.2 Section 101.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY GENERAL PROVISIONS § 101.2 Authority of Customs officers. (a) Supremacy of delegated authority...

Effects of training intervention on non-ergonomic positions among video display terminals (VDT) users.

Science.gov (United States)

Mirmohammadi, Seyed Jalil; Mehrparvar, Amir Houshang; Olia, Mohammad Bagher; Mirmohammadi, Monirolsadat

2012-01-01

Substantial evidence shows an association between musculoskeletal disorders (MSDs) and certain work-related physical factors. One of the jobs with known ergonomic hazards is working with video display terminals (VDTs). Redesign, ergonomic improvements, and education have generally been recommended as solutions for the prevention of musculoskeletal disorders. We designed this study to assess the effects of ergonomic training on the working postures of VDT users. In an intervention study, we assessed the impact of ergonomic training on the ergonomic hazards and work postures in employees working with VDTs. Participants and their workstations were assessed by Rapid Upper Limb Assessment (RULA) method before and after training. 70 employees of an office, working with a VDT more than four hours per day entered the study. The greatest compliance with OSHA workstation recommendations was seen with the monitor (21.4% of cases) and the least compliance with the one was the chair (10.0%). Mean RULA score before and after intervention were 5.90, and 5.07, respectively, and the difference was statistically significant (p training office ergonomics to the VDT users, even without changing work place components can significantly improve VDT users' behavior and ability to properly fit a workstation to him/herself.

Ergonomic sustainability based on the ergonomic maturity level measurement.

Science.gov (United States)

Vidal, Mario Cesar; Guizze, Carmen Lucia Campos; Bonfatti, Renato José; Silva e Santos, Marcello

2012-01-01

This paper aims at the application of an ergonomic maturity model (EMM), in order to assess the ergonomic sustainability outreach of ergonomic actions. This proposition was motivated by the widespread sensation that the development of the discipline, its educational devices and related practices depends on the attitude of ergonomics practitioners rather than environmental macroergonomic conditions. Maturity modeling in this paper is undertaken as a tool for ergonomic practitioners. Thus, its foundations were uprooted from diverse fields: Clinic Psychology, Quality Management and Project Management. The paper brings about a detailled explanation of this ergonomic maturity tool. The empirical part is fulfilled by the examination - using the EMM - of four emblematic cases excerpted from our research lab ergonomic portfolio.

Auditing and GRC automation in SAP

CERN Document Server

Chuprunov, Maxim

2013-01-01

Going beyond current literature, this book extends internal controls to efficiency and profitability. Offers an audit guide for an SAP ERP system, covers risks and control descriptions, and shows how to automate compliance management based on SAP GRC.

Accomplishments in free-piston stirling tests at NASA GRC

Science.gov (United States)

Schreiber, Jeffrey G.; Skupinski, Robert C.

2002-01-01

A power system based on the Stirling Radioisotope Generator (SRG) has been identified for potential use on deep space missions, as well as for Mars rovers that may benefit from extended operation. The Department of Energy (DOE) has responsibility for developing the generator and the NASA Glenn Research Center (GRC) is supporting DOE in this effort. The generator is based on a free-piston Stirling power convertor that has been developed by the Stirling Technology Company (STC) under contract to DOE. The generator would be used as a high-efficiency alternative to the Radioisotope Thermoelectric Generators (RTGs) that have been used on many previous missions. The increased efficiency leads to a factor of 3 to 4 reduction in the inventory of plutonium required to heat the generator. GRC has been involved in the development of Stirling power conversion technology for over 25 years. The support provided to this project by GRC has many facets and draws upon the lab's scientists and engineers that have gained experience in applying their skills to the previous Stirling projects. This has created a staff with an understanding of the subtleties involved in applying their expertise to Stirling systems. Areas include materials, structures, tribology, controls, electromagnetic interference, permanent magnets, alternator analysis, structural dynamics, and cycle performance. One of the key areas of support to the project is in the performance testing of the free-piston Stirling convertors. Since these power convertors are the smallest, lowest power Stirling machines that have been tested at GRC, a new laboratory was equipped for this project. Procedures and test plans have been created, instrumentation and data systems developed, and Stirling convertors have been tested. This paper will describe the GRC test facility, the test procedures that are used, present some of the test results and outline plans for the future. .

Green ergonomics: combining sustainability and ergonomics.

Science.gov (United States)

Pilczuk, Davana; Barefield, Kevin

2014-01-01

When discussing ergonomics, the term 'sustainability' usually refers to the preservation of the human workforce. However, in 2010 Gulfstream Aerospace Corporation made a conscious effort to combine ergonomics and environmental sustainability in order to increase employee engagement for both programs. They introduced a companywide campaign called Green Ergo which is the idea of creating ergonomic solutions from scrap material found on site. This concept embraced the true meaning of 'green' and encouraged engineers and employees all across the company to design innovative green ergonomic solutions. The idea generated over 35 new ergo solutions, reduced waste production, and solved over 700 ergo problems for a fraction of the cost of newly purchased items. The demand for these items grew large enough that the company outsourced their manufacturing to a local non-profit. The Green Ergo campaign has changed the culture of the company and has increased the level of buy-in for both the ergonomics and sustainability programs.

Aplicaciones del GRC en España y Argelia

Directory of Open Access Journals (Sweden)

Rodríguez Santiago, Jesús

1986-09-01

Full Text Available Not Available.Este artículo resume la experiencia obtenida en la utilización del mortero de cemento reforzado con fibra de vidrio (GRC en el campo de la construcción. Se describen en primer lugar las características del material y el proceso de fabricación en factoría de paneles de GRC. Se exponen a continuación algunas realizaciones llevadas a cabo con este material destacando, por su volumen y rapidez de ejecución, el conjunto de fachadas para edificios de viviendas, hospitales y centros escolares construidos en Argelia. También se comentan otras aplicaciones del GRC para la rehabilitación y decoración interior de edificios y para la construcción de elementos singulares. Finalmente, en el apartado de las conclusiones se menciona la necesidad de seguir investigando en el comportamiento a largo plazo de este material para poder aumentar su utilización en la construcción.

Research on the Application of GRC Material in Exhibition Decoration Engineering

Science.gov (United States)

Cai, Yan

2018-03-01

Glass fiber reinforced cement (GRC) is a kind of new building material which is based on cement and take the alkali resistant glass fiber as reinforcing material. It is mainly used in building decoration project and it has many advantages like environmental protection, economical, practical modeling and others. This paper mainly studies the concrete application of GRC material in exhibition building decoration project.

19 CFR 12.62 - Enforcement; duties of Customs officers.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Enforcement; duties of Customs officers. 12.62 Section 12.62 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY...; duties of Customs officers. (a) In accordance with the authority contained in sections 10 and 12 of the...

Measuring the Emotions Elicited by Office Chairs

NARCIS (Netherlands)

Reijneveld, K.; Looze, M.P. de; Krause, F.; Desmet, P.

2003-01-01

Office chair designers have traditionally focused their design efforts on optimizing the so-called 'ergonomic fit.' Although the effort to design chairs that support physical comfort is commendable, the focus on ergonomics neglects the possible impact of emotional responses on the general experience

Ergonomics Considerations in Microcomputing.

Science.gov (United States)

Torok, Andrew G.

1984-01-01

Discusses evolution of ergonomics and development of computer ergonomics with its sub-fields of hardware ergonomics (user-equipment-related problems including workstation design); software ergonomics (problems in communication with computers); and peopleware ergonomics (psychological impact). Ergonomic features of VDTs, keyboards, and printers are…

The Effects of Training, Feedback, and Participant Involvement in Behavioral Safety Observations on Office Ergonomic Behavior

Science.gov (United States)

Sasson, Joseph R.; Austin, John

2005-01-01

Eleven computer terminal operators participated in an experiment that assessed effects of several interventions aimed at increasing safe ergonomic performance. All participants received ergonomics training and performance feedback while six of them collected observations of safe behavior among the remaining five participants. Effects of…

Computer users' ergonomics and quality of life - evidence from a developing country.

Science.gov (United States)

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan

2018-06-01

This study is aimed at investigating the quality of workplace ergonomics at various Pakistani organizations and quality of life of computer users working in these organizations. Two hundred and thirty-five computer users (only those employees who have to do most of their job tasks on computer or laptop, and at their office) responded by filling the questionnaire covering questions on workplace ergonomics and quality of life. Findings of the study revealed the ergonomics at those organizations was poor and unfavourable. The quality of life (both physical and mental health of the employees) of respondents was poor for employees who had unfavourable ergonomic environment. The findings thus highlight an important issue prevalent at Pakistani work settings.

A framework for providing ergonomic feedback using smart cameras.

NARCIS (Netherlands)

Chen, Chih-Wei; Maatta, T.T.; Wong, K.; Aghajan, H.

2012-01-01

The importance of proper ergonomics for the health and wellbeing of office workers is being increasingly promoted by federal agencies, such as the OSHA (Occupational Safety and Health Administration) and the NIOSH (National Institute for Occupational Safety and Health), which provide guidelines for

16 CFR 1000.19 - Office of Financial Management, Planning and Evaluation.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Office of Financial Management, Planning and... COMMISSION ORGANIZATION AND FUNCTIONS § 1000.19 Office of Financial Management, Planning and Evaluation. The Office of Financial Management, Planning and Evaluation is responsible for developing the Commission's...

ERGONOMIC OFFICE POSITION ANALYSIS

Directory of Open Access Journals (Sweden)

DUMITRU Bogdan

2010-07-01

Full Text Available This paper present the risks faced by people working in the office. In the next pages you will find some methods and suggestions how to prevent the appearance of occupational diseases. These suggestions can help anyone to rearrange his work place in order to make his job more pleasant and healthy.

49 CFR 1242.21 - Station and office buildings (account XX-19-23).

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Station and office buildings (account XX-19-23). 1242.21 Section 1242.21 Transportation Other Regulations Relating to Transportation (Continued) SURFACE... Structures § 1242.21 Station and office buildings (account XX-19-23). If the sum of the direct freight and...

Flexible workspace design and ergonomics training: impacts on the psychosocial work environment, musculoskeletal health, and work effectiveness among knowledge workers.

Science.gov (United States)

Robertson, Michelle M; Huang, Yueng-Hsiang; O'Neill, Michael J; Schleifer, Lawrence M

2008-07-01

A macroergonomics intervention consisting of flexible workspace design and ergonomics training was conducted to examine the effects on psychosocial work environment, musculoskeletal health, and work effectiveness in a computer-based office setting. Knowledge workers were assigned to one of four conditions: flexible workspace (n=121), ergonomics training (n=92), flexible workspace+ergonomics training (n=31), and a no-intervention control (n=45). Outcome measures were collected 2 months prior to the intervention and 3 and 6 months post-intervention. Overall, the study results indicated positive, significant effects on the outcome variables for the two intervention groups compared to the control group, including work-related musculoskeletal discomfort, job control, environmental satisfaction, sense of community, ergonomic climate, communication and collaboration, and business process efficiency (time and costs). However, attrition of workers in the ergonomics training condition precluded an evaluation of the effects of this intervention. This study suggests that a macroergonomics intervention is effective among knowledge workers in office settings.

32 CFR 2400.19 - Declassification by the Director of the Information Security Oversight Office.

Science.gov (United States)

2010-07-01

... Information Security Oversight Office. 2400.19 Section 2400.19 National Defense Other Regulations Relating to... SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Declassification and Downgrading § 2400.19 Declassification by the Director of the Information Security Oversight Office. If the Director of the Information...

ESA 86: proceedings for the second annual conference of the Ergonomics Society of Southern Africa

International Nuclear Information System (INIS)

1986-01-01

The proceedings contain presentations from ESA 86 which reflect most of the major areas of Ergonomics as it is researched and practised internationally. Highlights include presentations dealing with transport and computer system ergonomics, office furniture and other consumer products, safety at work and executive health. One seminar 'Ergonomics and nuclear power generation', looks at the control systems and its safety in a nuclear power plant. Ergonomics is concerned with the relationship between people and technology: specifically the design of the user interface. Its objective is to enhance efficiency, usability and safety and it is applied to the design of a wide range of industrial and consumer products. However not the least consideration is to achieve as near as possible total wellbeing for the Human Factor

Modification of General Research Corporation (GRC) Dynatup 8200 Drop Tower Rebounding Brake System

Science.gov (United States)

2016-08-01

Rebounding Brake System by David Gray, Robert Kaste, and Bradley Lawrence Approved for public release; distribution is...Research Laboratory Modification of General Research Corporation (GRC) Dynatup 8200 Drop Tower Rebounding Brake System by David Gray and...Research Corporation (GRC) Dynatup 8200 Drop Tower Rebounding Brake System 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Ergonomic Training for Tomorrow's Office.

Science.gov (United States)

Gross, Clifford M.; Chapnik, Elissa Beth

1987-01-01

The authors focus on issues related to the continual use of video display terminals in the office, including safety and health regulations, potential health problems, and the role of training in minimizing work-related health problems. (CH)

Using information technology governance, risk management and compliance (GRC as a creator of business values – a case study

Directory of Open Access Journals (Sweden)

Sam Lubbe

2011-08-01

Full Text Available The relationship between Information Technology (IT Governance, Risk Management and Compliance (GRC and organisation business values continues to interest academics and practitioners (IT Governance Institute, 2003. Like governance, risk management and compliance generally, IT GRC is about the decision rights and accountabilities that encourage desirable behaviour in the use of IT (IT Governance Institute, 2003. A case study approach was used in an organisation with many business units. The organisation selected is a mining company, RioZim, situated in Zimbabwe. Data was collected from business units on IT issues and business values. The interviews centred on the IT GRC practices based on responsibility and authority for IT decision making. The results suggest that IT GRC does not adequately support business values. The study revealed that business values should drive IT GRC and IT GRC should be the responsibility of executives and all business units.

The effect of silica fume and metakaolin on glass-fibre reinforced concrete (GRC ageing

Directory of Open Access Journals (Sweden)

Enfedaque Díaz, A.

2010-12-01

Full Text Available The deterioration of the mechanical properties of glassfibre reinforced concrete (GRC over time rules out the use of this material in load-bearing structures. While one possible solution to this problem is the addition of pozzolans or metakaolin to the cement mortar, the amounts needed to ensure GRC integrity raise its price to non-competitive levels. Experimental research has been conducted to analyze whether the addition of small amounts of silica fume or metakaolin can prevent or mitigate the ageing issue. Unfortunately, the findings indicate that the addition of small proportions of metakaolin or silica fume to GRC are ineffective in improving its long-term performance.

Para el uso del mortero de cemento reforzado con fibras de vidrio (GRC en estructuras portantes se han de solucionar los problemas de reducción de las propiedades mecánicas que aparecen con el paso del tiempo. Estos problemas pueden ser solucionados mediante la adición de puzolanas o de metacaolín, a la pasta de mortero de cemento. Sin embargo, la cantidad de metacaolín que ha de ser añadida es elevada y el precio del GRC fabricado está fuera del mercado. Se ha realizado una campaña experimental que analiza si la adición de humo de sílice o de metacaolín en proporciones reducidas consigue evitar o paliar el problema del envejecimiento, que supone un freno al uso del GRC en elementos estructurales. Desgraciadamente, los resultados experimentales muestran que proporciones bajas de metacaolín o de humo de sílice no son efectivas para reducir el problema de pérdida de propiedades mecánicas.

Ergonomic Chairs

Science.gov (United States)

1997-01-01

Findings published in the NASA Anthropometric Source Book by Johnson Space Center helped BodyBilt, Inc. to fashion controlled comfort chairs that lessen the harmful effects of gravity on seated workers. Crew members living aboard NASA's Skylab noted that in space the human posture differs from the normal posture caused by the tug of one gravity. There has been an alarming increase in back pain and muscle fatigue in workers, along with a dramatic escalation in repetitive stress injuries. BodyBilt's ergonomically-correct line of office chairs are targeted for the average worker that sits for prolonged periods, be it in the classroom or boardroom. Their roster of national clients lists such organizations as IBM, Microsoft, Texas Instruments, Hewlett-Packard, Eastman-Kodak, Boeing, Motorola, and Walt Disney Studios.

Workability of glass reinforced concrete (GRC) with granite and silica sand aggregates

Science.gov (United States)

Moceikis, R.; Kičaitė, A.; Keturakis, E.

2017-10-01

Glass fiber reinforced concrete (GRC) opens the door for lightweight and complex shaped innovative construction, adding architectural value to buildings. With panel thickness down to 15 mm, considerable amount of total loads and materials per square meter of facade can be saved, if compared to conventionally used 80 mm thickness outer layer in insulated precast concrete wall elements. Even though GRC is used for over 50 years in such countries as Great Britain, USA and Japan, there are very few examples and little research done in Eastern Europe with this building material. European Commission propagates sustainable design as commitment to energy efficiency, environmental stewardship and conservation. For this reason, GRC plays important role in mowing toward these goals. In this paper, GRC premix recipes including fine granite and silica sands, reinforced with 13mm length alkali resistant glass fibers are investigated. Two CEM I 52,5R cements with different particle sizes were used and severe water dissociation noticed in one of concrete mixes. Cement particle size distribution determined with laser diffraction particle analyser Cilas 1090LD. To determine modulus of rupture (M.O.R.) and limit of proportionality (L.O.P), plates thickness 15 and 20 mm were produced and tested for flexural resistance according to 4-point bending scheme. Concrete workability tests were made according EN 1170-1.

Web sites for ergonomics support

OpenAIRE

Fafejta, Martin

2012-01-01

The subject of this bachelor thesis is survey of computer classrooms from the ergonomic point of view and show ergonomic rules to internet community in accessible form. Theoretic knowledge was gain from literature connected with ergonomic and work hygiene. Main relevance was given to use of computer and ergonomic of computer classroom. Several schools was evaluates in practical part with focus on ergonomic suitability. The conclusions of this thesis are websites contains ergonomics rules and ...

Ergonomics policy in Indonesia.

Science.gov (United States)

Sutarjo, Untung S

2007-12-01

Workers' conditions in accordance with their place of work are different from one area to another, especially in this reformation era where there are immense alterations in politics shown from the centralized government shifting to decentralization and district autonomy. Ergonomics problems in Indonesia are reviewed. In home industries, workers have to adjust themselves to their jobs, and ergonomic improvement may face significant impediments especially in small-scale industries. It is necessary to create or identify the most plausible model to be implemented in accordance with the conditions of districts, including low awareness about the relation between ergonomics and workers' productivity in producing goods and services and working processes scattered often at their own houses. As conditions conducive to ergonomics programs, district-level willingness to improve and increase the wealth of their society, recognition by businesses about the impacts of ergonomics on productivity and reduction of medical treatment costs may be mentioned. Labor unions support ergonomic improvements at production processes, and professionals and academicians are ready to assist, whereas national banks and foreign investment may encourage new technologies including ergonomics aspects. It is important to strengthen ergonomic improvement efforts in Indonesia through establishing district ergonomics improvement networks and ergonomics peer leaders with the support of continual training starting from the training of core leaders at the province level and extending to peer leaders at district level. This training should be made as simple as possible in order to facilitate innovations toward changes. Finally assistance is needed by the mentor teams in order to periodically monitor the improvements undertaken.

The modulation of upper extremity musculoskeletal disorders for a knowledge worker with chiropractic care and applied ergonomics: a case study

Science.gov (United States)

Sherrod, Charles W.; Casey, George; Dubro, Robert E.; Johnson, Dale F.

2013-01-01

Objective This report describes the case management of musculoskeletal disorders for an employee in a college work environment using both chiropractic care and applied ergonomics. Clinical Findings A 54-year-old male office worker presented with decreased motor function in both wrists; intermittent moderate-to-severe headaches; and pain or discomfort in the neck, both shoulders, left hand and wrist, and lumbosacral region resulting from injuries sustained during recreational soccer and from excessive forces and awkward postures when interacting with his home and office computer workstations. Intervention and Results Ergonomic training, surveillance, retrofitted equipment with new furniture, and an emphasis on adopting healthy work-style behaviors were applied in combination with regular chiropractic care. Baseline ergonomic job task analysis identified risk factors and delineated appropriate control measures to improve the subject's interface with his office workstation. Serial reevaluations at 3-month, 1-year, and 2-year periods recorded changes to the participant's pain, discomfort, and work-style behaviors. At end of study and relative to baseline, pain scale improved from 4/10 to 2/10; general disability improved from 4 to 0; and hand grip strength (pounds) increased from 20 to 105 (left) and 45 to 100 (right). Healthy work habits and postures adopted in the 3-month to 1-year period regressed to baseline exposures for 3 of 6 risk priorities identified in the ergonomic job task analysis. Conclusion The patient responded positively to the intervention of chiropractic care and applied ergonomics. PMID:23997724

Application of Chemistry in Materials Research at NASA GRC

Science.gov (United States)

Kavandi, Janet L.

2016-01-01

Overview of NASA GRC Materials Development. New materials enabled by new chemistries offering unique properties and chemical processing techniques. Durability of materials in harsh environments requires understanding and modeling of chemical interaction of materials with the environment.

Design Processes and Constructive Ergonomics

DEFF Research Database (Denmark)

Broberg, Ole

2015-01-01

This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, ...

Green ergonomics: definition and scope.

Science.gov (United States)

Thatcher, Andrew

2013-01-01

This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

Meeting diversity in ergonomics

NARCIS (Netherlands)

Pikaar, R.N.; Koningsveld, E.A.P.; Settels, P.J.M.

2007-01-01

Key Features: Offers the conceptual tools for creating more adaptable ergonomic designs to meet the needs of diverse human populations, Unlock the strategic business value found in ergonomically safe and comfortable products, Learn from in-depth case studies how ergonomic intervention was

Design Processes and Constructive Ergonomics

OpenAIRE

Broberg, Ole

2015-01-01

This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, many challenges are to be overcome. They relate among others to education and training of ergonomist, and the cultural and institutional setting of ergonomics in specific countries.

A participatory and integrative approach to improve productivity and ergonomics in assembly

NARCIS (Netherlands)

Looze, M.P. de; Rhijn, J.W. van; Deursen, J. van; Tuinzaad, G.H.; Reijneveld, C.N.

2003-01-01

A participatory and integrative approach was applied to improve the productivity and ergonomics of the assembly lines in two factories, producing magnetic stop valves and office furniture, respectively. Main elements of the approach are the active participation of the company and the integration of

Ergonomics

CSIR Research Space (South Africa)

Schutte, PC

2007-01-01

Full Text Available whether trends exist across jobs that use similar equipment, tools or processes. 23.4.4 Limitations An effective ergonomics hazard identification and risk assessment process should facilitate the classification of possible high risk jobs in a mining... to review the data available, which identify a shop or workplace as a potential ergonomics problem area. It is also useful to become familiar with the processes and job activities that are performed in each work area. Step 2: Conduct a workplace/ work...

Implementation of ergonomics in the management of parking increasing the quality of living parking park in mall Robinson Denpasar city

Science.gov (United States)

Sutapa, I. K.; Sudiarsa, I. M.

2018-01-01

The problems that often arise in the area of Denpasar City mostly caused by parking problems at the centers of activities such as shopping centers. The problems that occur not only because of the large number of vehicles that parked but also the result of the condition of parking officers who have not received attention, there is no concern about the physical condition of parking attendants because doing night guard duty. To improve the quality of parking officer, ergonomic parking lot is improved through the application of appropriate technology with systemic, holistic, interdisciplinary and participatory approach. The general objective of the research is to know the implementation of ergonomics in parking management on the improvement of the quality of parking officer in Robinson shopping center. The indicator of the quality of the parking officer work is the decrease of musculoskeletal complaints, fatigue, workload, boredom and increasing work motivation. The study was conducted using the same subject design, involving 10 subjects as a simple random sample. Intervention is done by arrangement of ergonomic basement motorcycle parking. Measurements done before and after repair. Washing out (WO) for 14 days. The data obtained were analyzed descriptively, tested normality (shapirowilk) and homogeneity (Levene Test). For normal and homogeneous distribution data, different test with One Way Anova, different test between Period with Post Hoc. Normally distributed and non-homogeneous data, different test with Friedman Test, different test between periods using Wilcoxon test. Data were analyzed with significance level of 5%. The results showed that the implementation of ergonomic in the management of parking area of the court decreased musculoskeletal complaints by 15.10% (p management of the parking lot improves the quality of the parking officer work from: (1) decrease of musculoskeletal complaints, (2) decrease of melting rate, (3) decrease of parking workload

Sound in Ergonomics

Directory of Open Access Journals (Sweden)

Jebreil Seraji

1999-03-01

Full Text Available The word of “Ergonomics “is composed of two separate parts: “Ergo” and” Nomos” and means the Human Factors Engineering. Indeed, Ergonomics (or human factors is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data and methods to design in order to optimize human well-being and overall system performance. It has applied different sciences such as Anatomy and physiology, anthropometry, engineering, psychology, biophysics and biochemistry from different ergonomics purposes. Sound when is referred as noise pollution can affect such balance in human life. The industrial noise caused by factories, traffic jam, media, and modern human activity can affect the health of the society.Here we are aimed at discussing sound from an ergonomic point of view.

Turbine Seal Research at NASA GRC

Science.gov (United States)

Proctor, Margaret P.; Steinetz, Bruce M.; Delgado, Irebert R.; Hendricks, Robert C.

2011-01-01

Low-leakage, long-life turbomachinery seals are important to both Space and Aeronautics Missions. (1) Increased payload capability (2) Decreased specific fuel consumption and emissions (3) Decreased direct operating costs. NASA GRC has a history of significant accomplishments and collaboration with industry and academia in seals research. NASA's unique, state-of-the-art High Temperature, High Speed Turbine Seal Test Facility is an asset to the U.S. Engine / Seal Community. Current focus is on developing experimentally validated compliant, non-contacting, high temperature seal designs, analysis, and design methodologies to enable commercialization.

GRC: Composite material from an inorganic matrix reinforced with AR glass fibres

Directory of Open Access Journals (Sweden)

Comino Almenara, P. I.

1996-06-01

Full Text Available This article describes the historical background of Cem-FIL. Alkali Resistant Glass Fibre, as well as the composite characteristics of the element they generate: GRC. The most important advantages and properties of this type of Composite Material are also detailed.

En este artículo se detallan cuáles son las bases históricas de las Fibras de Vidrio Álcali-Resistentes Cem-FIL así como las características del elemento compuesto que ellas generan: GRC. En este documento también se pueden encontrar indicaciones sobre las principales ventajas y propiedades de este tipo de Material Compuesto.

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! •\tErgonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 •\tErgonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive an invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive and invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will be invited by email after your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

Occupational ergonomics and injury prevention.

Science.gov (United States)

Stobbe, T J

1996-01-01

Ergonomics is the study of people at work. The current focus is on the prevention of work-induced musculoskeletal injuries through the application of sound ergonomic principles. This chapter has briefly outlined ergonomics and its history, has described low back pain and upper extremity cumulative trauma disorders from an ergonomic perspective, and has discussed control and prevention approaches for a few scenarios. Ergonomic principles are based on a combination of science and engineering and a thorough understanding of human capabilities and limitations. When these principles are applied to the design of a job, task, process, or procedure, the incidence and severity of musculoskeletal injuries decrease. In many cases productivity and morale also improve. Workers are spared suffering, and employers are spared costs. It is hoped that this discussion will encourage more health, safety, and business professionals to learn about and apply ergonomics in their workplaces for the improvement of the worker, product, and business. Finally, many additional epidemiologic studies on the individual and joint effects of the CTD risk factors are needed. The knowledge gained from these studies will promote the more effective application of ergonomic principles to reduce worker suffering, improve products, and reduce costs.

Ultrasonic characterization of GRC with high percentage of fly ash substitution.

Science.gov (United States)

Genovés, V; Gosálbez, J; Miralles, R; Bonilla, M; Payá, J

2015-07-01

New applications of non-destructive techniques (NDT) with ultrasonic tests (attenuation and velocity by means of ultrasonic frequency sweeps) have been developed for the characterization of fibre-reinforced cementitious composites. According to new lines of research on glass-fibre reinforced cement (GRC) matrix modification, two similar GRC composites with high percentages of fly ash and different water/binder ratios will be studied. Conventional techniques have been used to confirm their low Ca(OH)(2) content (thermogravimetry), fibre integrity (Scanning Electron Microscopy), low porosity (Mercury Intrusion Porosimetry) and good mechanical properties (compression and four points bending test). Ultrasound frequency sweeps allowed the estimation of the attenuation and pulse velocity as functions of frequency. This ultrasonic characterization was correlated successfully with conventional techniques. Copyright © 2015 Elsevier B.V. All rights reserved.

A review and exploration of sociotechnical ergonomics.

Science.gov (United States)

Dirkse van Schalkwyk, Riaan; Steenkamp, Rigard J

2017-09-01

A holistic review of ergonomic history shows that science remains important for general occupational health and safety (OSH), the broad society, culture, politics and the design of everyday things. Science provides an unconventional and multifaceted viewpoint exploring ergonomics from a social, corporate and OSH perspective. Ergonomic solutions from this mindset may redefine the science, and it will change with companies that change within this socially hyper-connected world. Authentic corporate social responsibility will counter 'misleadership' by not approaching ergonomics with an afterthought. The review concludes that ergonomics will be stronger with social respect and ergonomic thinking based on the optimisation of anthropometric data, digital human models, computer-aided tools, self-empowerment, job enrichment, work enlargement, physiology, industrial psychology, cybernetic ergonomics, operations design, ergonomic-friendly process technologies, ergonomic empowerment, behaviour-based safety, outcome-based employee wellness and fatigue risk management solutions, to mention a few.

Building Taxonomy Knowledge ‘Systemic Ergonomics Intervention Work’: a Product Joining up practice with theory in an Industrially Developing Country and its 'Meta-Reflection'

OpenAIRE

Helali, Faramarz

2015-01-01

Based on evidence accumulated during the author’s 19 years of ergonomics intervention experiences and investigations with the different challenges and roles, the ergonomics ‘know-how’ transfer explores and describes the models to success implementation of Ergonomics and Human Factors Management in an Industrially Developing Country. A systematic ergonomics ‘know-how’ transfer management at Micro and Macroergonomics-based levels for training and learning could be managed and led in an industri...

Ergonomics: case study in a university library

OpenAIRE

Daniela Capri; Eliana Maria dos Santos Bahia; Adilson Luiz Pinto

2012-01-01

This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics wer...

Action in Ergonomics

Science.gov (United States)

Training Officer, 1975

1975-01-01

A discussion with James Crowley of British Steel Corporation on the changing face of ergonomics in practice today and yesterday examines the influence of experimental psychology on the method of study and data collection. The broadening scope of ergonomics from only safety concerns to cost effectiveness and the computer are analyzed. (Author/JB)

Incorporating organisational safety culture within ergonomics practice.

Science.gov (United States)

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

Ergonomics, education and children: a personal view.

Science.gov (United States)

Woodcock, A

2007-10-01

Educational ergonomics - the teaching of ergonomics and the design of environments where ergonomics teaching and learning might occur - has received little attention from ergonomists. This paper first describes the roots of the author's interest and research in educational ergonomics; second it provides a personal view of the opportunities and challenges posed by the two streams of educational ergonomics; and lastly it considers the implications of teaching ergonomics to children in terms of their personal development, the design of schools and the impact such initiatives might have on wider societal problems.

Implantation of an ergonomics administration system in a company: report of an occupational therapist specialist in ergonomics.

Science.gov (United States)

Moraes, Berla; Andrade, Valéria Sousa

2012-01-01

This article aims to describe step-by-step the implementation of an ergonomics administration system in a company from March 2009 till March 2011 by an occupational therapist specialist in ergonomics based on the OSHAS 18001 guidelines and the Regulatory Norms 17 manual. The process began with the definition of five requisites with bases on the manual of application of the Regulatory Norms 17: survey; materials individual transportation and discharge; workplace furniture; workplace equipments; work environment and organization of the work to be managed with bases on the OSHAS 18001 guidelines. The following steps were established: sensitization of the company high administration, elaboration and institution of an ergonomics politics, development of ergonomics committees, ergonomics analysis of the work with recommendation of ergonomic improvements, implantation of improvements and evaluation or the results. This research experiment suggests the importance not only of a guiding axle but also of a professional qualification and participation of the company on the implementation of an ergonomics management system.

Ergonomics: The Forgotten Variable.

Science.gov (United States)

Fitterman, L. Jeffrey

1998-01-01

Defines ergonomics and discusses design and environmental considerations. Suggests work-space requirements for: tables, chairs, monitor height, ambient noise and light, electricity, and environmental hazards. Includes sources for additional information related to ergonomic design. (AEF)

Ergonomic design in ancient Greece.

Science.gov (United States)

Marmaras, N; Poulakakis, G; Papakostopoulos, V

1999-08-01

Although the science of ergonomics did not actually emerge until the 20th century, there is evidence to suggest that ergonomic principles were in fact known and adhered to 25 centuries ago. The study reported here is a first attempt to research the ergonomics concerns of ancient Greeks, on both a conceptual and a practical level. On the former we present a collection of literature references to the concepts of usability and human-centred design. On the latter, examples of ergonomic design from a variety of fields are analysed. The fields explored here include the design of everyday utensils, the sculpture and manipulation of marble as a building material and the design of theatres. Though hardly exhaustive, these examples serve to demonstrate that the ergonomics principles, in content if not in name, actually emerged a lot earlier than is traditionally thought.

Ergonomía y Terapia Ocupacional = Ergonomics and Occupational Therapy

Directory of Open Access Journals (Sweden)

Guzman Suárez, Olga Beatriz

2008-02-01

Full Text Available RESUMENEn éste artículo se dan a conocer algunas de las aplicaciones más importantes de la ergonomía en Terapia Ocupacional, puesto que a pesar de tener un gran reconocimiento en el sector trabajo, en donde hay un mayor predominio de estudio por parte de la ergonomía, aún se desconocen muchas de las actividades que pueden ser realizadas por éstos profesionales. Terapia Ocupacional abarca el estudio de todas las etapas de la vida del individuo, en cuanto a su desempeño ocupacional se refiere, lo cual garantiza un amplio campo de actuación profesional, que permite profundizar e investigar en diversas áreas, para que desde su experiencia y resultados se facilite el aporte a muchos proyectos de investigación que requieren de conceptos que son transversales a diferentes disciplinas y que pueden constituirse en conocimiento nuevo para la sociedad científica. Con la creación del Grupo de Salud Ocupacional y Ergonomía en la Universidad Manuela Beltrán, se pretende “Desarrollar proyectos de investigación en el campo de la ergonomía, aplicables en los contextos: laboral, escolar, social y familiar; que permitan la adaptación de diferentes entornos al ser humano y a su vez mejorar condiciones tendientes al logro de un óptimo desempeño y productividad”[1]. De esta manera, se inician proyectos de investigación con estudiantes de Terapia Ocupacional, cuyos avances han permitido escribir el presente articulo, se espera además la vinculación de otras áreas para su fortalecimiento. ABSTRACTIn this article they bring themselves to light some of the most important applications of the ergonomics in occupational therapy, since in spite of having a great recognition in the work sector, where there is a greater predominance of study on the part of the ergonomics, still many of the activities they do not know themselves that can be carried out for these professionals. The occupational therapy covers the study of all the phases of the life of

Green buildings need good ergonomics.

Science.gov (United States)

Hedge, A; Dorsey, J A

2013-01-01

A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

MAVEN Information Security Governance, Risk Management, and Compliance (GRC): Lessons Learned

Science.gov (United States)

Takamura, Eduardo; Gomez-Rosa, Carlos A.; Mangum, Kevin; Wasiak, Fran

2014-01-01

As the first interplanetary mission managed by the NASA Goddard Space Flight Center, the Mars Atmosphere and Volatile EvolutioN (MAVEN) had three IT security goals for its ground system: COMPLIANCE, (IT) RISK REDUCTION, and COST REDUCTION. In a multiorganizational environment in which government, industry and academia work together in support of the ground system and mission operations, information security governance, risk management, and compliance (GRC) becomes a challenge as each component of the ground system has and follows its own set of IT security requirements. These requirements are not necessarily the same or even similar to each other's, making the auditing of the ground system security a challenging feat. A combination of standards-based information security management based on the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF), due diligence by the Mission's leadership, and effective collaboration among all elements of the ground system enabled MAVEN to successfully meet NASA's requirements for IT security, and therefore meet Federal Information Security Management Act (FISMA) mandate on the Agency. Throughout the implementation of GRC on MAVEN during the early stages of the mission development, the Project faced many challenges some of which have been identified in this paper. The purpose of this paper is to document these challenges, and provide a brief analysis of the lessons MAVEN learned. The historical information documented herein, derived from an internal pre-launch lessons learned analysis, can be used by current and future missions and organizations implementing and auditing GRC.

Designing for sustainability: ergonomics--carpe diem.

Science.gov (United States)

Martin, K; Legg, S; Brown, C

2013-01-01

Sustainability is a global issue that has worldwide attention but the role of ergonomics in designing for sustainability is poorly understood and seldom considered. An analysis of the literature on ergonomics, design and sustainability was conducted via a search of electronic databases: Scopus, Business Source Complete, Google Scholar, Emerald Publishing, Academic Search Premiere, Web of Science, Discover and Ergonomics Abstracts, for the years 1995-2012. A total of 1934 articles fulfilled the search criteria, but content analysis of the abstracts indicated that only 14 refereed articles addressed the main search criteria. Of those seven were in ergonomics journals and seven were in other journals (and were not written by ergonomists). It is concluded that the contribution of ergonomics to sustainability and sustainable design has been limited, even though the goals of sustainability and ergonomics are congruent. Ergonomists have not been at the forefront of research contributing to sustainability - and it is time for them to 'seize the day' - 'carpe diem'. This literature review shows that ergonomics contribution to sustainability is limited but since there is congruence between the disciplines it calls for ergonomists to become more involved and to seize the day - carpe diem.

Ergonomics in Dentistry

OpenAIRE

Dargahi H; Saraji J; Sadr J; Sadri G

2010-01-01

Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materi...

Ergonomics, Engineering, and Business: Repairing a Tricky Divorce

DEFF Research Database (Denmark)

Jensen, Per Langaa; Broberg, Ole; Møller, Niels

2009-01-01

This paper discusses how the ergonomics community can contribute to make ergonomics a strategic element in business decisions on strategy and implementation of strategy. The ergonomics community is seen as a heterogeneous entity made up of educational and research activities in universities......, ergonomists and engineers with ergonomic skills, professional ergonomics and engineering societies, and the complex of occupational health and safety regulation. This community interacts in different ways with companies and hereby influences how companies are dealing with ergonomics. The paper argues...

A new ergonomically improved lathe.

Science.gov (United States)

Harten, G A; Derks, P M

1975-09-01

Following frequent complaints of lower back pain by lathe operators, a working group from the Philips Ergonomics Department have produced a model of an ergonomically improved lathe which ensures a healthy posture for the lathe operator at work. The same healthy posture can be adopted whether the operator is sitting or standing. The operator also has a good view of his work. At least two manufacturers have undertaken to develop this ergonomic lathe.

Ergonomics

Science.gov (United States)

... between you and your job conditions. Examples of ergonomic changes to your work might include Adjusting the position of your computer ... you are safe, comfortable, and less prone to work-related injuries.

Achieving LEED credit for ergonomics: Laying the foundation.

Science.gov (United States)

Lynch, Mallory

2014-01-01

Despite guidance from the United States Green Building Council (USGBC) on the requirements for earning a Leadership in Energy and Environmental Design (LEED) ergonomics credit in the Innovation in Design and Innovation in Operations category, few projects have received the credit. The University of California, Berkeley ergonomics program, Ergonomics@Work, has aligned the ergonomics strategy to those of the USGBC and LEED to achieve the ergonomics credit in several new buildings. This article describes the steps needed to obtain the credit and highlights the opportunities it creates to partner with the project team to promote ergonomics. As a profession it is up to ergonomists to create the road map that incorporates ergonomics into the green building design.

The Need to Reevaluate Nonresponding Ergonomic Patients

Science.gov (United States)

Scarpa, Philip J.; Field, Steven A.

1999-01-01

The Kennedy Space Center (KSC) Environmental Health (EH) contractor performs ergonomic evaluations under its Ergonomic Program. Any KSC employee may request one or the reviewing physician may request one for a patient during a visit to an onsite medical facility. As part of the ergonomic evaluation, recommendations are given to the patient to help reduce any ergonomic problems they experience. The recommendations, if implemented, are successful in the majority of KSC patients; however, a group of patients do not seem to improve. Those who don't improve may be identified by reevaluations, which are performed to implement maximum resolution of ergonomic problems.

17 CFR 200.19c - Director of the Office of Compliance Inspections and Examinations.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Director of the Office of Compliance Inspections and Examinations. 200.19c Section 200.19c Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION ORGANIZATION; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Organization and Program Management General Organizatio...

28 CFR 19.5 - Report to the Office of Juvenile Justice and Delinquency Prevention.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Report to the Office of Juvenile Justice and Delinquency Prevention. 19.5 Section 19.5 Judicial Administration DEPARTMENT OF JUSTICE USE OF... Justice and Delinquency Prevention. DOJ will compile and submit to OJJDP, by June 30, 1987, a consolidated...

Ergonomics: case study in a university library

Directory of Open Access Journals (Sweden)

Daniela Capri

2012-08-01

Full Text Available This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics were contextualized and linked to the library and the university library. Referring to the methodology, the Ergonomical Assessment of the Built Environment was used as a reference. The study subjects comprised a sample of 15, among students and library staff. In the results obtained, when related to the physical-environmental analysis of the library, it was found that there are some aspects that differ from the regulatory standards and that also fall short in relation to feedback from users. Aspects such as lighting and noise were cited as unsatisfactory, but the temperature factor was analyzed as satisfactory.

'GRC1.5': Uptower Gearbox Testing to Investigate Bearing Axial Cracking

Energy Technology Data Exchange (ETDEWEB)

Keller, Jonathan; Vaes, David; McNiff, Brian

2016-02-16

This presentation focuses on the investigation of bearing axial cracking using the GRC1.5 uptower gearbox. Topics covered include the testing options considered, the project goal, and current and near-term activities.

Good ergonomic practices in a terminal facility

Energy Technology Data Exchange (ETDEWEB)

Anjos, Luciana Mattos dos; Curty, Adriana Favacho [CHEMTECH, Rio de Janeiro, RJ (Brazil); Franca, Guilherme Foerster do Monte; Jardino, Alessandro Neto [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2009-07-01

Ergonomics is the technological design of the interplay between men, machines and environment in order to make labor activities more pleasant, profitable and functional. This article analyses the importance of ergonomic issues in process terminal plants and facilities, since the conceptual design stage until the detail engineering design. The ergonomic solutions are compared with practices that are current in engineering design plants nowadays. It will be shown how an inadequate ergonomic design often leads to accessibility problems and non-effectiveness during plant operation and dangers in emergency situations. The way perform an ergonomic design is to integrate the various disciplines that are involved in all stages of the design plant. The earlier the ergonomic design is implemented the better are the results in cost reduction, since later design modifications are more time-consuming and expensive. (author)

Ergonomics in dental pratice

Directory of Open Access Journals (Sweden)

Lucas Quaresemin de Oliveira

2017-08-01

Full Text Available The application of ergonomics is critical so that you can get a suitable working environment for professional, it is safe, healthy and comfortable. The objective was to identify whether the dental students followed the principles of ergonomics during clinical visits, evaluating, through photographs, compliance with ergonomic principles applied in dental practice, and finally identify the most affected sites by RSI / WMSDs of students enrolled in the dental clinic of the Faculdade IMED. Snapshots were made and only considered the position of the student operator, the same taken by the researcher using the mobile device. For each clinical procedure were taken two photographs in hidden angles to the student operator so that it did not change its ergonomic position to be observed. After obtaining the photos, they were evaluated and classified in scores from 0 to 3 according to the adequacy of the work placement, and then inserted into Excel and later in a database (SPSS 15.0. The following work is a cross-sectional, observational study, they were conducted in dental clinics IMED college. Among the 66 respondents, 14 were male and 52 female. It was found that 57 (86,3% reported feeling pain somewhere in the body, being the most affected sites neck (36.4%, and consecutively lower back (30.3% and higher than the back (27.3%. The results of the 63 procedures performed by the photographic shots were classified as “inadequate” in 49 procedures, “partially adequate” in 12 and “impossible to evaluate” in 2 procedures. The research results have shown a high prevalence of musculoskeletal pain and do not follow the ergonomic principles, emphasizing the need for more attention to ergonomics of the students.

Ergonomics: A Commonsense Activity That Can Save Schools Money.

Science.gov (United States)

Fleer, Paul; Gauthier-Green, Erin

2002-01-01

Describes the use of ergonomics to reduce work-related musculoskeletal disorders such as back pain, tendonitis, and carpal tunnel syndrome. Describes ergonomics and how to identify ergonomic problems, conduct a job hazard analysis, and develop solutions. Also lists common ergonomic errors in schools. Provides an ergonomic checklist for employees…

Ergonomics in radiology

Energy Technology Data Exchange (ETDEWEB)

Goyal, N. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)], E-mail: nimitgoyal@doctors.org.uk; Jain, N.; Rachapalli, V. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)

2009-02-15

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations.

Ergonomics in radiology

International Nuclear Information System (INIS)

Goyal, N.; Jain, N.; Rachapalli, V.

2009-01-01

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Musculoskeletal discomfort during VDU tasks; input for a smart office chair

NARCIS (Netherlands)

Commissaris, D.A.C.M.; Blok, M.; Bosch, T.; Konemann, R.; Bronkhorst, R.

2008-01-01

TNO and BMA Ergonomics are developing a so-called smart office chair. This chair is supposed to provide feedback on postures and movements during seated office work. The feedback should enable the user (i.e. the worker doing VDU tasks) to perform his or her work with less discomfort and in a more

Ergonomics observation: Harvesting tasks at oil palm plantation.

Science.gov (United States)

Ng, Yee Guan; Shamsul Bahri, Mohd Tamrin; Irwan Syah, Md Yusoff; Mori, Ippei; Hashim, Zailina

2014-01-01

Production agriculture is commonly associated with high prevalence of ergonomic injuries, particularly during intensive manual labor and during harvesting. This paper intends to briefly describe an overview of oil palm plantation management highlighting the ergonomics problem each of the breakdown task analysis. Although cross-sectional field visits were conducted in the current study, insight into past and present occupational safety and health concerns particularly regarding the ergonomics of oil palm plantations was further exploited. Besides discussion, video recordings were extensively used for ergonomics analysis. The unique commodity of oil palm plantations presents significantly different ergonomics risk factors for fresh fruit bunch (FFB) cutters during different stages of harvesting. Although the ergonomics risk factors remain the same for FFB collectors, the intensity of manual lifting increases significantly with the age of the oil palm trees-weight of FFB. There is urgent need to establish surveillance in order to determine the current prevalence of ergonomic injuries. Thereafter, ergonomics interventions that are holistic and comprehensive should be conducted and evaluated for their efficacy using approaches that are integrated, participatory and cost-effective.

Ergonomics in the operating room: protecting the surgeon.

Science.gov (United States)

Rosenblatt, Peter L; McKinney, Jessica; Adams, Sonia R

2013-01-01

To review elements of an ergonomic operating room environment and describe common ergonomic errors in surgeon posture during laparoscopic and robotic surgery. Descriptive video based on clinical experience and a review of the literature (Canadian Task Force classification III). Community teaching hospital affiliated with a major teaching hospital. Gynecologic surgeons. Demonstration of surgical ergonomic principles and common errors in surgical ergonomics by a physical therapist and surgeon. The physical nature of surgery necessitates awareness of ergonomic principles. The literature has identified ergonomic awareness to be grossly lacking among practicing surgeons, and video has not been documented as a teaching tool for this population. Taking this into account, we created a video that demonstrates proper positioning of monitors and equipment, and incorrect and correct ergonomic positions during surgery. Also presented are 3 common ergonomic errors in surgeon posture: forward head position, improper shoulder elevation, and pelvic girdle asymmetry. Postural reset and motion strategies are demonstrated to help the surgeon learn techniques to counterbalance the sustained and awkward positions common during surgery that lead to muscle fatigue, pain, and degenerative changes. Correct ergonomics is a learned and practiced behavior. We believe that video is a useful way to facilitate improvement in ergonomic behaviors. We suggest that consideration of operating room setup, proper posture, and practice of postural resets are necessary components for a longer, healthier, and pain-free surgical career. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Ergonomics Contributions to Company Strategies

NARCIS (Netherlands)

J. Dul (Jan); W.P. Neumann (Patrick)

2008-01-01

textabstractManagers usually associate ergonomics with occupational health and safety and related legislation, not with business performance. In many companies, these decision makers seem not to be positively motivated to apply ergonomics for reasons of improving health and safety. In order to

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

Science.gov (United States)

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

Effect of an office ergonomic randomised controlled trial among workers with neck and upper extremity pain.

Science.gov (United States)

Dropkin, Jonathan; Kim, Hyun; Punnett, Laura; Wegman, David H; Warren, Nicholas; Buchholz, Bryan

2015-01-01

Office computer workers are at increased risk for neck/upper extremity (UE) musculoskeletal pain. A seven-month office ergonomic intervention study evaluated the effect of two engineering controls plus training on neck/UE pain and mechanical exposures in 113 computer workers, including a 3-month follow-up period. Participants were randomised into an intervention group, who received a keyboard/mouse tray (KBT), touch pad (TP) for the non-dominant hand and keyboard shortcuts, and a control group who received keyboard shortcuts. Participants continued to have available a mouse at the dominant hand. Outcomes were pain severity, computer rapid upper limb assessment (RULA), and hand activity level. Prevalence ratios (PRs) evaluated intervention effects using dichotomised pain and exposure scores. In the intervention group, the dominnt proximal UE pain PR=0.9, 95% CI 0.7 to 1.2 and the dominant distal UE PR=0.8, 95% CI 0.5 to 1.3, postintervention. The non-dominant proximal UE pain PR=1.0, 95% CI 0.8 to 1.4, while the non-dominant distal UE PR=1.2, 95% CI 0.6 to 2.2, postintervention. Decreases in non-neutral postures were found in two RULA elements (non-dominant UE PR=0.9, 95% CI 0.8 to 0.9 and full non-dominant RULA PR=0.8, 95% CI 0.8 to 0.9) of the intervention group. Hand activity increased on the non-dominant side (PR=1.4, 95% CI 1.2 to 1.6) in this group. While the intervention reduced non-neutral postures in the non-dominant UE, it increased hand activity in the distal region of this extremity. To achieve lower hand activity, a KBT and TP used in the non-dominant hand may not be the best devices to use. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Fundamentals of ergonomic exoskeleton robots

NARCIS (Netherlands)

Schiele, A.

2008-01-01

This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a

Ergonomics for enhancing detection of machine abnormalities.

Science.gov (United States)

Illankoon, Prasanna; Abeysekera, John; Singh, Sarbjeet

2016-10-17

Detecting abnormal machine conditions is of great importance in an autonomous maintenance environment. Ergonomic aspects can be invaluable when detection of machine abnormalities using human senses is examined. This research outlines the ergonomic issues involved in detecting machine abnormalities and suggests how ergonomics would improve such detections. Cognitive Task Analysis was performed in a plant in Sri Lanka where Total Productive Maintenance is being implemented to identify sensory types that would be used to detect machine abnormalities and relevant Ergonomic characteristics. As the outcome of this research, a methodology comprising of an Ergonomic Gap Analysis Matrix for machine abnormality detection is presented.

Informational ergonomics and design: signage design for Monte Sião Camp.

Science.gov (United States)

Marques, Luiz Guilherme Oliveira; Cardoso, Vânia Maria Batalha

2012-01-01

This paper refers to the development of a signage system, driven by the vector of Signage Design and Informational Ergonomics associated with Regulatory Standards. The methodology of the Ergonomic Intervention of Moraes and Mont'Alvão (2003), in its early stages, and the Method of the Signage Pyramid of Calori (2007) were used to develop the research, data collection and analysis and to guide the design by a signaling system. The system contemplated by this job is called Mount Zion, a site of 19 hectares, which has signs of disturbance. As a result, we obtained a signaling system, with graphic features that refer to formal-site, capable of meeting the needs of orientation and displacement inherent to the site.

Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work.

Science.gov (United States)

Rahman, Mohd Nasrull Abdol; Mohamad, Siti Shafika

2017-01-01

Computer works are associated with Musculoskeletal Disorders (MSDs). There are several methods have been developed to assess computer work risk factor related to MSDs. This review aims to give an overview of current techniques available for pen-and-paper-based observational methods in assessing ergonomic risk factors of computer work. We searched an electronic database for materials from 1992 until 2015. The selected methods were focused on computer work, pen-and-paper observational methods, office risk factors and musculoskeletal disorders. This review was developed to assess the risk factors, reliability and validity of pen-and-paper observational method associated with computer work. Two evaluators independently carried out this review. Seven observational methods used to assess exposure to office risk factor for work-related musculoskeletal disorders were identified. The risk factors involved in current techniques of pen and paper based observational tools were postures, office components, force and repetition. From the seven methods, only five methods had been tested for reliability. They were proven to be reliable and were rated as moderate to good. For the validity testing, from seven methods only four methods were tested and the results are moderate. Many observational tools already exist, but no single tool appears to cover all of the risk factors including working posture, office component, force, repetition and office environment at office workstations and computer work. Although the most important factor in developing tool is proper validation of exposure assessment techniques, the existing observational method did not test reliability and validity. Futhermore, this review could provide the researchers with ways on how to improve the pen-and-paper-based observational method for assessing ergonomic risk factors of computer work.

The Changes of Ergonomics in Hungary and Engineering Education

OpenAIRE

Istvan Lükö

2013-01-01

Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-tech...

The Changes of Ergonomics in Hungary and Engineering Education

Directory of Open Access Journals (Sweden)

Istvan Lükö

2013-01-01

Full Text Available Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-technical systems. Here, we present the developmental stages of ergonomics, divided into six periods, first, and then the relationship between environmental ergonomics and health and safety. In the last chapter, I shall expound a few details from Hungarian investigations in work psychology, as well as from the activity of prominent academic circles at certain universities.

Translating concepts of complexity to the field of ergonomics.

Science.gov (United States)

Walker, Guy H; Stanton, Neville A; Salmon, Paul M; Jenkins, Daniel P; Rafferty, Laura

2010-10-01

Since 1958 more than 80 journal papers from the mainstream ergonomics literature have used either the words 'complex' or 'complexity' in their titles. Of those, more than 90% have been published in only the past 20 years. This observation communicates something interesting about the way in which contemporary ergonomics problems are being understood. The study of complexity itself derives from non-linear mathematics but many of its core concepts have found analogies in numerous non-mathematical domains. Set against this cross-disciplinary background, the current paper aims to provide a similar initial mapping to the field of ergonomics. In it, the ergonomics problem space, complexity metrics and powerful concepts such as emergence raise complexity to the status of an important contingency factor in achieving a match between ergonomics problems and ergonomics methods. The concept of relative predictive efficiency is used to illustrate how this match could be achieved in practice. What is clear overall is that a major source of, and solution to, complexity are the humans in systems. Understanding complexity on its own terms offers the potential to leverage disproportionate effects from ergonomics interventions and to tighten up the often loose usage of the term in the titles of ergonomics papers. STATEMENT OF RELEVANCE: This paper reviews and discusses concepts from the study of complexity and maps them to ergonomics problems and methods. It concludes that humans are a major source of and solution to complexity in systems and that complexity is a powerful contingency factor, which should be considered to ensure that ergonomics approaches match the true nature of ergonomics problems.

Ergonomic Improvements for Foundries

Energy Technology Data Exchange (ETDEWEB)

Frank Peters; Patrick Patterson

2002-06-18

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products.

Ergonomic risk assessment by REBA method

Directory of Open Access Journals (Sweden)

A. Hassanzadeh

2007-09-01

Full Text Available Background and aims   Awkward posture has been recognized as one of the important risk factors of work-related musculoskeletal disorders (WMSD. The current study aimed at determining ergonomic risk level, WMSDs ratio and exploring working postures contribution to WMSD. During the study, working postures were phased and then they were scored using the REBAtool from observing the work.   Methods   To perform the study, workers of a home appliances manufacturing factory were  assessed. In order to collecting required data, each part of the body was scored and work frequency,  load/force, coupling were considered to achieve a REBA score. Nordic Questionnaire was used  to determining WMSD ratio and its relationship whit REBA score. 231 working phases were  assessed and 13761 questions using Nordic Questionnaire were answered. Percentage of the workers in press, spot welding, grinding, cutting, assembling, and painting was 15.8, 21.6, 25.9, 34.5, 89.9%, respectively. Workers were 18-54 years old and their work recording average was 52  month.   Results   REBAscore was 4-13 in under study tasks. REBA score = 9 had the most frequency  (20% and REBA score =13 had the least frequency (1.4%. Risk level in press, cutting, and  painting was high (25.5, 100, 68.2% cases. This shows that cutting has the highest risk level. On the other hand 38.5% of the workers in past 12 month had problem in different parts of their body. Totally 11.7% of the workers had problem in neck, 19.4$ in leg, 10.7% in foot, 82.5% in lower back,  87.6% in upper back and 7.8% in shoulders.10.7% of the workers had previous illness that 8.7%  of them were non occupational and 1.9% were caused their previous jobs. The REBAscore mean  and ergonomic risk level is not equal in tasks (p-value0. Action level was necessary  soon in others.   Conclusion   Risk level should be reduced specially in cutting. The heavy workload and  working height poor design, awkward

Ergonomía

OpenAIRE

Rodríguez Mondelo, Pedro Manuel

1999-01-01

Conté: 1. Fundamentos. 2. Confort y estrés térmico. La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

Advanced Manufacturing Technologies (AMT): Additive Manufactured Hot Fire Planning and Testing in GRC Cell 32

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this project is to hot fire test an additively manufactured thrust chamber assembly TCA (injector and thrust chamber). GRC will install the...

2014 Overview of NASA GRC Electrochemical Power and Energy Storage Technology

Science.gov (United States)

Reid, Concha M.

2014-01-01

Overview presentation to the IAPG Chemical Working Group meeting, discussing current electrochemical power and energy storage R and D at NASA GRC including missions, demonstrations, and reserch projects. Activities such as ISS Lithium-Ion Battery Replacements, the Advanced Exploration Systems Modular Power Systems project, Enabling Electric Aviation with Ultra-High Energy Litium Metal Batteries, Advanced Space Power Systems project, and SBIR STTR work, will be discussed.

Overview of Multi-Kilowatt Free-Piston Stirling Power Conversion Research at GRC

Science.gov (United States)

Geng, Steven M.; Mason, Lee S.; Dyson, Rodger W.; Penswick, L. Barry

2008-01-01

As a step towards development of Stirling power conversion for potential use in Fission Surface Power (FSP) systems, a pair of commercially available 1 kW class free-piston Stirling convertors and a pair of commercially available pressure wave generators (which will be plumbed together to create a high power Stirling linear alternator test rig) have been procured for in-house testing at Glenn Research Center. Delivery of both the Stirling convertors and the linear alternator test rig is expected by October, 2007. The 1 kW class free-piston Stirling convertors will be tested at GRC to map and verify performance. The convertors will later be modified to operate with a NaK liquid metal pumped loop for thermal energy input. The high power linear alternator test rig will be used to map and verify high power Stirling linear alternator performance and to develop power management and distribution (PMAD) methods and techniques. This paper provides an overview of the multi-kilowatt free-piston Stirling power conversion work being performed at GRC.

Overview of Multi-kilowatt Free-Piston Stirling Power Conversion Research at GRC

Science.gov (United States)

Geng, Steven M.; Mason, Lee S.; Dyson, Rodger W.; Penswick, L. Barry

2008-01-01

As a step towards development of Stirling power conversion for potential use in Fission Surface Power (FSP) systems, a pair of commercially available 1 kW class free-piston Stirling convertors and a pair of commercially available pressure wave generators (which will be plumbed together to create a high power Stirling linear alternator test rig) have been procured for in-house testing at Glenn Research Center. Delivery of both the Stirling convertors and the linear alternator test rig is expected by October, 2007. The 1 kW class free-piston Stirling convertors will be tested at GRC to map and verify performance. The convertors will later be modified to operate with a NaK liquid metal pumped loop for thermal energy input. The high power linear alternator test rig will be used to map and verify high power Stirling linear alternator performance and to develop power management and distribution (PMAD) methods and techniques. This paper provides an overview of the multi-kilowatt free-piston Stirling power conversion work being performed at GRC.

Indonesia ergonomics roadmap: where we are going?

Science.gov (United States)

Wignjosoebroto, Sritomo

2007-12-01

There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

Science.gov (United States)

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

2009 Archaea: Ecology, Metabolism & Molecular Biology GRC

Energy Technology Data Exchange (ETDEWEB)

Furlow, Julie Maupin- [Univ. of Florida, Gainesville, FL (United States)

2009-07-26

Archaea, one of three major evolutionary lineages of life, are a fascinating and diverse group of microbes with deep roots overlapping those of eukaryotes. The focus of the 'Archaea: Ecology Metabolism & Molecular Biology' GRC conference expands on a number of emerging topics highlighting new paradigms in archaeal metabolism, genome function and systems biology; information processing; evolution and the tree of life; the ecology and diversity of archaea and their viruses; and industrial applications. The strength of this conference lies in its ability to couple a field with a rich history in high quality research with new scientific findings in an atmosphere of stimulating exchange. This conference remains an excellent opportunity for younger scientists to interact with world experts in this field.

How can ergonomic practitioners learn to practice a macro-ergonomic framework developed in academia?

DEFF Research Database (Denmark)

Broberg, Ole; Seim, Rikke; Andersen, Vibeke

2009-01-01

How can a macro-ergonomic framework developed in academia be “transferred” to ergonomic practitioners and become a new work practice? The purpose of this paper is to reflect upon experiences from an interactive research program in which this transferral was tested by two consecutive approaches......” with the researchers and other practitioners; 3) paying attention to the organizational settings of the ergonomic practitioner to make sure that a new work practice is implemented in the organization and not only by a single practitioner....... and interpretation of results when applying the new concept to a real case in a company; 2) the concept is introduced to practitioners, after which they try to practice the concept in a normal consultancy situation, and afterwards have the opportunity to reflect upon their experiences in a “learning space...

The charge of ergonomics--a model according to the influence of ergonomic workplace design for economical and efficient indicators of the automotive industry.

Science.gov (United States)

Neubert, Nicole; Bruder, Ralph; Toledo, Begoña

2012-01-01

The importance of ergonomic workplace design has been rising incredibly. The knowledge of the interaction with a view to many indicators (e.g. operators' health, quality, productivity etc.) in the automotive assembly shop pushed into another thinking of ergonomics and an increasing awareness of economic possibilities relating to benefits and cost savings aligned with ergonomics. The paper discusses exemplary the various indicators and factors which could be influenced by ergonomic workplace design. These factors are linked each other and support the statement of ergonomic efficiency. Thus, the aim of this paper is to present a model which describes that investments in ergonomic work placement acts with preventive measurements, minimization of losses (refinishing operations, compensation money etc.) and extensive economies on the whole company.

Ergonomics and epidemiology in evidence based health prevention

DEFF Research Database (Denmark)

Jensen, Olaf Chresten

2009-01-01

According to the definitions, ergonomics is a natural part of the health and safety activity but it has its own research methods and causal models. Public health, occupational and clinical medicines are closely related to epidemiology and differ from ergonomics by using a disease model with a wide...... success of health effects from the clinical trials could not be obtained. It is argued that the ergonomics design, Integration and Implementation can be strengthened by adapting the epidemiological methods and causal models. The ergonomics can then contribute to a common development of public health...

Ergonomics in laparoscopic surgery

Directory of Open Access Journals (Sweden)

Supe Avinash

2010-01-01

Full Text Available Laparoscopic surgery provides patients with less painful surgery but is more demanding for the surgeon. The increased technological complexity and sometimes poorly adapted equipment have led to increased complaints of surgeon fatigue and discomfort during laparoscopic surgery. Ergonomic integration and suitable laparoscopic operating room environment are essential to improve efficiency, safety, and comfort for the operating team. Understanding ergonomics can not only make life of surgeon comfortable in the operating room but also reduce physical strains on surgeon.

Ergonomic analysis of construction worker's body postures using wearable mobile sensors.

Science.gov (United States)

Nath, Nipun D; Akhavian, Reza; Behzadan, Amir H

2017-07-01

Construction jobs are more labor-intensive compared to other industries. As such, construction workers are often required to exceed their natural physical capability to cope with the increasing complexity and challenges in this industry. Over long periods of time, this sustained physical labor causes bodily injuries to the workers which in turn, conveys huge losses to the industry in terms of money, time, and productivity. Various safety and health organizations have established rules and regulations that limit the amount and intensity of workers' physical movements to mitigate work-related bodily injuries. A precursor to enforcing and implementing such regulations and improving the ergonomics conditions on the jobsite is to identify physical risks associated with a particular task. Manually assessing a field activity to identify the ergonomic risks is not trivial and often requires extra effort which may render it to be challenging if not impossible. In this paper, a low-cost ubiquitous approach is presented and validated which deploys built-in smartphone sensors to unobtrusively monitor workers' bodily postures and autonomously identify potential work-related ergonomic risks. Results indicates that measurements of trunk and shoulder flexions of a worker by smartphone sensory data are very close to corresponding measurements by observation. The proposed method is applicable for workers in various occupations who are exposed to WMSDs due to awkward postures. Examples include, but are not limited to industry laborers, carpenters, welders, farmers, health assistants, teachers, and office workers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evidence-based ergonomics. A comparison of Japanese and American office layouts.

Science.gov (United States)

Noro, Kageyu; Fujimaki, Goroh; Kishi, Shinsuke

2003-01-01

There is a variety of alternatives in office layouts. Yet the theoretical basis and criteria for predicting how well these layouts accommodate employees are poorly understood. The objective of this study was to evaluate criteria for selecting office layouts. Intensive computer workers worked in simulated office layouts in a controlled experimental laboratory. Eye movement measures indicate that knowledge work requires both concentration and interaction. Findings pointed to one layout as providing optimum balance between these 2 requirements. Recommendations for establishing a theoretical basis and design criteria for selecting office layouts based on work style are suggested.

Physical Ergonomics and Musculoskeletal Disorders: What's hot? What's cool?

NARCIS (Netherlands)

Beek, A.J. van der; IJmker, S.

2007-01-01

This chapter discusses the physical ergonomics and musculoskeletal disorders and summarizes the Triennial International Ergonomics Association (IEA) World Congress 2006-IEA2006-highlights on physical ergonomics and work-related MusculoSkeletal Disorders (MSDs). Two general trends are observed.

Hands-on lessons in ergonomics for youth

Energy Technology Data Exchange (ETDEWEB)

Bennett, C; Alexandre, M; Jacobs, K

2005-09-29

Ergonomics risk factors apply to everybody. Numerous adults have experienced disabling injuries related to use of computers and other forms of technology. Now children are using technology even more than adults. Increasingly ergonomics risk factors are being recognized as present in the world of children. Outreach to schools and the surrounding community by employers may help protect the future work force. A growing body of researchers believe that children can benefit from the early introduction of ergonomics awareness and preventative measures. While individual representatives of the educational system may embrace the concept of introducing ergonomics into the classroom, a number of barriers can prevent implementation of integrated programs. Some of the barriers to introducing ergonomics in schools have been absence of a tie to educational standards, the existing demands on teaching hours, and the absence of easily executable lesson plans. Ergonomics is rarely included in teacher training and professional ergonomics expertise is needed for the development of a class-based program. As part of Strategic Vision plan for 2025, a National Laboratory identified community outreach and the future workforces as key areas for initiatives. A series of hands-on interactive modules have been developed by professional ergonomics specialists. They are being tested with elementary, middle and high school students. Where possible, the content has been tied to the educational standards in the State of California in the USA. Currently the modules include grip strength, effective breathing, optimal keyboard and mouse positions, optimizing chairs, posture and movement, backpack safety and safe lifting. Each module takes the students through a related activity or experience. An individual worksheet asks them questions about the experience and guides them to consider implications in their activities of daily living. A module on hearing is under development. The goal is to have a

Strategies and arguments of ergonomic design for sustainability.

Science.gov (United States)

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

3 CFR 13503 - Executive Order 13503 of February 19, 2009. Establishment of the White House Office of Urban Affairs

Science.gov (United States)

2010-01-01

.... Establishment of the White House Office of Urban Affairs 13503 Order 13503 Presidential Documents Executive Orders Executive Order 13503 of February 19, 2009 EO 13503 Establishment of the White House Office of... President the White House Office of Urban Affairs (the “Office”). Sec. 3. Functions. The principal functions...

State of Science: ergonomics and global issues.

Science.gov (United States)

Thatcher, Andrew; Waterson, Patrick; Todd, Andrew; Moray, Neville

2018-02-01

In his 1993 IEA keynote address, Neville Moray urged the ergonomics discipline to face up to the global problems facing humanity and consider how ergonomics might help find some of the solutions. In this State of Science article we critically evaluate what the ergonomics discipline has achieved in the last two and a half decades to help create a secure future for humanity. Moray's challenges for ergonomics included deriving a value structure that moves us beyond a Westernised view of worker-organisation-technology fit, taking a multidisciplinary approach which engages with other social and biological sciences, considering the gross cross-cultural factors that determine how different societies function, paying more attention to mindful consumption, and embracing the complexity of our interconnected world. This article takes a socio-historical approach by considering the factors that influence what has been achieved since Moray's keynote address. We conclude with our own set of predictions for the future and priorities for addressing the challenges that we are likely to face. Practitioner Summary: We critically reflect on what has been achieved by the ergonomics profession in addressing the global challenges raised by Moray's 1993 keynote address to the International Ergonomics Association. Apart from healthcare, the response has largely been weak and disorganised. We make suggestions for priority research and practice that is required to facilitate a sustainable future for humanity.

A Review of the Ergonomic Issues in the Laparoscopic Operating Room

Directory of Open Access Journals (Sweden)

Sang D. Choi

2012-01-01

Full Text Available This review paper discusses the ergonomic challenges associated with laparoscopy in the operating room (OR and summarizes the practical ergonomic solutions. The literature search was conducted in the fields of laparoscopy and applied ergonomics. Findings indicated that laparoscopic OR staff (surgeons, perioperative nurses and technicians commonly experienced physical and mental ergonomic risks while working in prolonged static and awkward body positions. This study highlighted the need for more ergonomic interventions in OR environment in order to improve the efficiency of laparoscopy. Ergonomic solutions included utilizing adjustable equipment, placing computer peripherals in optimal locations, providing ergonomic instruments, and improving communication. Understanding the job- or task-related ergonomic risks and hazards could help identify intervention requirements to meet the challenges associated with increased dependency on advanced high technology in the OR.

Ergonomic positioning or equipment for treating carpal tunnel syndrome.

Science.gov (United States)

O'Connor, Denise; Page, Matthew J; Marshall, Shawn C; Massy-Westropp, Nicola

2012-01-18

Non-surgical treatment, including ergonomic positioning or equipment, are sometimes offered to people experiencing mild to moderate symptoms from carpal tunnel syndrome (CTS). The effectiveness and duration of benefit from ergonomic positioning or equipment interventions for treating CTS are unknown. To assess the effects of ergonomic positioning or equipment compared with no treatment, a placebo or another non-surgical intervention in people with CTS. We searched the Cochrane Neuromuscular Disease Group Specialized Register (14 June 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (2011, Issue 2, in The Cochrane Library), MEDLINE (1966 to June 2011), EMBASE (1980 to June 2011), CINAHL Plus (1937 to June 2011), and AMED (1985 to June 2011). We also reviewed the reference lists of randomised or quasi-randomised trials identified from the electronic search. Randomised or quasi-randomised controlled trials comparing ergonomic positioning or equipment with no treatment, placebo or another non-surgical intervention in people with CTS. Two review authors independently selected trials for inclusion, extracted data and assessed risk of bias of included studies. We calculated risk ratios (RR) and mean differences (MD) with 95% confidence intervals (CI) for the primary and secondary outcomes. We pooled results of clinically and statistically homogeneous trials, where possible, to provide estimates of the effect of ergonomic positioning or equipment. We included two trials (105 participants) comparing ergonomic versus placebo keyboards. Neither trial assessed the primary outcome (short-term overall improvement) or adverse effects of interventions. In one small trial (25 participants) an ergonomic keyboard significantly reduced pain after 12 weeks (MD -2.40; 95% CI -4.45 to -0.35) but not six weeks (MD -0.20; 95% CI -1.51 to 1.11). In this same study, there was no difference between ergonomic and standard keyboards in hand function at six or 12 weeks or palm

Ergonomic measures in construction work: enhancing evidence-based implementation

NARCIS (Netherlands)

Visser, S.

2015-01-01

Despite the development and availability of ergonomic measures in the construction industry, the number of construction workers reporting high physical work demands remains high. A reduction of the high physical work demands can be achieved by using ergonomic measures. However, these ergonomic

Integrating ergonomic knowledge into engineering design processes

DEFF Research Database (Denmark)

Hall-Andersen, Lene Bjerg

Integrating ergonomic knowledge into engineering design processes has been shown to contribute to healthy and effective designs of workplaces. However, it is also well-recognized that, in practice, ergonomists often have difficulties gaining access to and impacting engineering design processes...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...... to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...

'The perfect is the enemy of the good' - ergonomics research and practice. Institute of Ergonomics and Human Factors Annual Lecture 2010.

Science.gov (United States)

Buckle, Peter

2011-01-01

The relationship between research and practice in ergonomics and human factors has rarely been addressed in the literature. This presents specific problems for researchers when seeking to relate their work to the research community. Equally, practitioners are often frustrated by the lack of appropriate research to meet their needs. This paper seeks to identify current drivers for ergonomics research along with an analysis of how these are changing. Specifically, the use of bibliometric data to assess research output and its impact on a multi-disciplinary subject such as ergonomics is examined. Areas where action may be required to stimulate better research and improved practice are proposed. These include a greater role for the practitioner in completing the circle of knowledge and improving the evidence base for practice with, in particular, practitioners becoming more active in determining research priorities. It is concluded that combined effort is needed by researcher and practitioner communities to enable and promote a more effective understanding of the true impact of ergonomics across industry and society. STATEMENT OF RELEVANCE: The relationship between ergonomics research and practice is examined. Research 'drivers' are identified, including the influence of bibliometric data. Implications for researchers and practitioners are discussed. The role of practitioners in completing the circle of knowledge and improving the ergonomics evidence base is stressed, as is the need to promote the impact of ergonomics across society.

An ergonomic task analysis of spinal anaesthesia.

LENUS (Irish Health Repository)

Ajmal, Muhammad

2009-12-01

Ergonomics is the study of physical interaction between humans and their working environment. The objective of this study was to characterize the performance of spinal anaesthesia in an acute hospital setting, applying ergonomic task analysis.

Following ergonomics guidelines decreases physical and cardiovascular workload during cleaning tasks.

Science.gov (United States)

Samani, Afshin; Holtermann, Andreas; Søgaard, Karen; Holtermann, Andreas; Madeleine, Pascal

2012-01-01

The aim was to investigate the effect of ergonomics guidelines on muscular activity, postural and cardiovascular load during cleaning. Eighteen cleaners performed 10 min of cleaning tasks in two locations; three min in a laboratory and seven min in a lecture room. All participants performed the task with or without focusing on ergonomics guidelines (ergonomics/non-ergonomics session). Bipolar surface electromyography was recorded bilaterally from upper trapezius and erector spinae muscles. A tri-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes, and the cardiovascular load was estimated by electrocardiogram. Ergonomics sessions resulted in lower muscular load, a more complex pattern of muscular activity, lower range of motion and angular velocity of the trunk as well as lower cardiovascular load compared with non-ergonomics sessions (p ergonomics guidelines during cleaning tasks. This study investigated the effects of following instructive ergonomics guidelines during cleaning tasks (daily curriculum of cleaning including mopping, sweeping, changing trash bins and cleaning of desks and blackboards). Following the ergonomics guidelines reduces the general workload and induces a more complex pattern of muscular activity. The study contributes with novel knowledge concerning ergonomics guidelines and work techniques.

Can participatory ergonomics become 'the way we do things in this firm' - the Scandinavian approach to participatory ergonomics

DEFF Research Database (Denmark)

Jensen, Per Langaa

1997-01-01

Under the label 'participatory ergonomics' the idea of establishing changes in working conditions through participatory approaches has been a central issue within ergonomics. Tools and procedures have been developed and demonstrated beneficial. But how this approach can be established as the way...

A brief essay on ergonomics in graphic design.

Science.gov (United States)

Mendonça, André N F; van der Linden, Júlio C S; Fonseca, Tania M G

2012-01-01

Through Brazilian publication revision on the relations amongst Ergonomics and Design, we observed the tendency towards an approach focusing on product design. However, it is our duty to question which would be the influences of ergonomics in the graphic design. As a methodology, we considered the identification that the practices derived from ergonomics as epistemic system found in the main bibliography related to graphic design.

14 CFR 385.19 - Authority of the Director, Office of Aviation Information, Bureau of Transportation Statistics.

Science.gov (United States)

2010-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ORGANIZATION STAFF ASSIGNMENTS AND REVIEW OF ACTION UNDER ASSIGNMENTS Assignment of Functions to Staff Members § 385.19 Authority...

30 years of ergonomics at 3M: a case study.

Science.gov (United States)

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

Fundamentals of ergonomic exoskeleton robots

OpenAIRE

Schiele, A.

2008-01-01

This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a new theoretical framework for analyzing physical human robot interaction (pHRI) with exoskeletons, and (2) a clear set of design rules of how to build wearable, portable exoskeletons to easily and...

Ergonomic Improvements for Foundries; FINAL

International Nuclear Information System (INIS)

Frank Peters; Patrick Patterson

2002-01-01

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products

Avoid Workplace Injury through Ergonomics | Poster

Science.gov (United States)

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases

Dental Hygiene Students' Self-Assessment of Ergonomics Utilizing Photography.

Science.gov (United States)

Partido, Brian B

2017-10-01

Due to postural demands, dental professionals are at high risk for developing work-related musculoskeletal disorders (WMSDs). Dental clinicians' lack of ergonomic awareness may impede the clinical application of recommendations to improve their posture. The aim of this study was to determine whether feedback involving photography and self-assessment would improve dental hygiene students' ergonomic scores and accuracy of their ergonomic self-assessments. The study involved a randomized control design and used a convenience sample of all 32 junior-year dental hygiene students enrolled in the autumn 2016 term in The Ohio State University baccalaureate dental hygiene program. Sixteen students were randomly assigned to each of two groups (control and training). At weeks one and four, all participants were photographed and completed ergonomic self-evaluations using the Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks two and three, participants in the training group were photographed again and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were given ergonomic scores by three raters. Students' self-assessments in the control group and faculty evaluations of the training group showed significant improvement in scores over time (F(1,60)=4.25, p<0.05). In addition, the accuracy of self-assessment significantly improved for students in the training group (F(1,30)=8.29, p<0.01). In this study, dental hygiene students' self-assessments using photographs resulted in improvements in their ergonomic scores and increased accuracy of their ergonomic self-assessments. Any improvement in ergonomic score or awareness can help reduce the risks for WMSDs, especially among dental clinicians.

Process evaluation of a participatory ergonomics programme to prevent low back pain and neck pain among workers

Directory of Open Access Journals (Sweden)

Driessen Maurice T

2010-08-01

Full Text Available Abstract Background Both low back pain (LBP and neck pain (NP are major occupational health problems. In the workplace, participatory ergonomics (PE is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled trials (RCTs is scarce. This study evaluates the process of the Stay@Work participatory ergonomics programme, including the perceived implementation of the prioritised ergonomic measures. Methods This cluster-RCT was conducted at the departments of four Dutch companies (a railway transportation company, an airline company, a steel company, and a university including its university medical hospital. Directly after the randomisation outcome, intervention departments formed a working group that followed the steps of PE during a six-hour working group meeting. Guided by an ergonomist, working groups identified and prioritised risk factors for LBP and NP, and composed and prioritised ergonomic measures. Within three months after the meeting, working groups had to implement the prioritised ergonomic measures at their department. Data on various process components (recruitment, reach, fidelity, satisfaction, and implementation components, i.e., dose delivered and dose received were collected and analysed on two levels: department (i.e., working group members from intervention departments and participant (i.e., workers from intervention departments. Results A total of 19 intervention departments (n = 10 with mental workloads, n = 1 with a light physical workload, n = 4 departments with physical and mental workloads, and n = 4 with heavy physical workloads were recruited for participation, and the reach among working group members who participated was high (87%. Fidelity and satisfaction towards the PE programme rated by the working group members was good (7.3 or higher. The same was found for the Stay@Work ergocoach training (7.5 or higher. In total, 66

Developing measures for information ergonomics in knowledge work.

Science.gov (United States)

Franssila, Heljä; Okkonen, Jussi; Savolainen, Reijo

2016-03-01

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis. Practitioner Summary: The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.

Corporate ergonomics programme at Ford Motor Company.

Science.gov (United States)

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

Validation of ergonomic instructions in robot-assisted surgery simulator training.

Science.gov (United States)

Van't Hullenaar, C D P; Mertens, A C; Ruurda, J P; Broeders, I A M J

2018-05-01

Training in robot-assisted surgery focusses mainly on technical skills and instrument use. Training in optimal ergonomics during robotic surgery is often lacking, while improved ergonomics can be one of the key advantages of robot-assisted surgery. Therefore, the aim of this study was to assess whether a brief explanation on ergonomics of the console can improve body posture and performance. A comparative study was performed with 26 surgical interns and residents using the da Vinci skills simulator (Intuitive Surgical, Sunnyvale, CA). The intervention group received a compact instruction on ergonomic settings and coaching on clutch usage, while the control group received standard instructions for usage of the system. Participants performed two sets of five exercises. Analysis was performed on ergonomic score (RULA) and performance scores provided by the simulator. Mental and physical load scores (NASA-TLX and LED score) were also registered. The intervention group performed better in the clutch-oriented exercises, displaying less unnecessary movement and smaller deviation from the neutral position of the hands. The intervention group also scored significantly better on the RULA ergonomic score in both the exercises. No differences in overall performance scores and subjective scores were detected. The benefits of a brief instruction on ergonomics for novices are clear in this study. A single session of coaching and instruction leads to better ergonomic scores. The control group showed often inadequate ergonomic scores. No significant differences were found regarding physical discomfort, mental task load and overall performance scores.

New procedures of ergonomics design in a large oil company.

Science.gov (United States)

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Ergonomics and sustainability: towards an embrace of complexity and emergence.

Science.gov (United States)

Dekker, Sidney W A; Hancock, Peter A; Wilkin, Peter

2013-01-01

Technology offers a promising route to a sustainable future, and ergonomics can serve a vital role. The argument of this article is that the lasting success of sustainability initiatives in ergonomics hinges on an examination of ergonomics' own epistemology and ethics. The epistemology of ergonomics is fundamentally empiricist and positivist. This places practical constraints on its ability to address important issues such as sustainability, emergence and complexity. The implicit ethical position of ergonomics is one of neutrality, and its positivist epistemology generally puts value-laden questions outside the parameters of what it sees as scientific practice. We argue, by contrast, that a discipline that deals with both technology and human beings cannot avoid engaging with questions of complexity and emergence and seeking innovative ways of addressing these issues. Ergonomics has largely modelled its research on a reductive science, studying parts and problems to fix. In sustainability efforts, this can lead to mere local adaptations with a negative effect on global sustainability. Ergonomics must consider quality of life globally, appreciating complexity and emergent effects of local relationships.

Ergonomics SA

African Journals Online (AJOL)

Journal Homepage Image. Ergonomics SA (esa) provides a medium for publication of material relevant to occupational conditions and needs in Southern Africa at a time of change unparalleled in history. To this end the journal accepts articles in the following categories: research papers, review articles, conceptual theories, ...

Physical ergonomics

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.

2013-01-01

Physical ergonomics deals with the physical load on the human body when performing activities like work, sports, jobs at home or dealing with products. With regard to the exposure to physical loads and its potential effects on the human body, the presented framework is helpful. In this article we

Ergonomics SA: Contact

African Journals Online (AJOL)

Principal Contact. Mrs June McDougall. Rhodes University. Department of Human Kinetics and Ergonomics. P.O. Box 94. Rhodes University. Grahamstown. 6140. Phone: +27 46 6038471. Email: j.mcdougall@ru.ac.za ...

Musculoskeletal, visual and psychosocial stress in VDU operators after moving to an ergonomically designed office landscape.

Science.gov (United States)

Helland, Magne; Horgen, Gunnar; Kvikstad, Tor Martin; Garthus, Tore; Bruenech, Jan Richard; Aarås, Arne

2008-05-01

This study investigated the effect of moving from single occupancy offices to a landscape environment. Thirty-four Visual Display Unit (VDU) operators reported significantly worsened condition of lighting and glare in addition to increased visual discomfort. For visual discomfort, the difference with 95% confidence interval was 10.7 (1.9-19.5) Visual Analog Scale (VAS) as group mean value. The most reasonable explanation for these results may be that the operators were glared from high luminance from the windows, when the Venetian blinds were not properly used. Glare was significantly correlated with visual discomfort, rs=0.35. Both illuminance and luminance in the work area, and contrast reduction on the VDU screen were in line with recommendations from CIE for VDU work. In a regression analysis, the visual discomfort explained 53% of the variance in the neck and shoulder pain. In the office landscape, the eye blink rate during habitual VDU work was recorded for 12 randomly selected operators from the 34 participants. A marked drop in eye blink rate during VDU work was found when this was compared to "easy conversation" (VDU work, mean=9.7 blinks per minute; "easy conversation," mean=21.4 blinks per minute). Participants reported many of the organizational and psychosocial conditions and work factors worse when landscape office was compared to single occupancy office. These factors may have influenced the musculoskeletal pain. However, the pain level was still low at 6 years and not significantly different when compared with the start of the study period, except for a small but significant increase in shoulder pain. In this study, visual discomfort is clearly associated with pain in the neck and shoulder area.

Ergonomics: A bridge between fundamentals and applied research

OpenAIRE

Ghosh, Subrata; Bagchi, Anandi; Sen, Devashish; Bandyopadhyay, Pathikrit

2011-01-01

Ergonomics is becoming a subject of applying fundamentals on anthropocentric dimensions for holistic welfare. The so-called conflict between Basic science and Applied research finds one of its edges in Ergonomics. Be it cutting-edge technology or frontiers of scientific innovation-all start from understanding basic scientific aptitude and skill, and the best way to get familiar with the situation is practicing basic science again and again at a regular basis. Ergonomics is diversified in such...

Cost-effectiveness of ergonomic interventions in production

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.P.A.; Fritzsche, L.; O'Sullivan, L.; Levizzari, A.

2008-01-01

Ergonomic measures to reduce or eliminate the risks for developing musculoskeletal disorders, usually affects the performance at work as well, e.g. productivity or quality. The costs and benefits that can be associated with ergonomic measures are highly diverse in nature. Prior to investing in any

Ergonomics in the context of system safety

International Nuclear Information System (INIS)

Donnelly, K.E.

1984-01-01

In a complex industrial environment, ergonomics must be combined with management science and systems analysis to produce a program which can create effective change and improve safety performance. We give an overview of such an approach, namely System Safety, so that its ergonomic content may be seen

Wind Turbine Drivetrain Condition Monitoring During GRC Phase 1 and Phase 2 Testing

Energy Technology Data Exchange (ETDEWEB)

Sheng, S.; Link, H.; LaCava, W.; van Dam, J.; McNiff, B.; Veers, P.; Keller, J.; Butterfield, S.; Oyague, F.

2011-10-01

This report will present the wind turbine drivetrain condition monitoring (CM) research conducted under the phase 1 and phase 2 Gearbox Reliability Collaborative (GRC) tests. The rationale and approach for this drivetrain CM research, investigated CM systems, test configuration and results, and a discussion on challenges in wind turbine drivetrain CM and future research and development areas, will be presented.

Finding ergonomic solutions--participatory approaches.

Science.gov (United States)

Hignett, Sue; Wilson, John R; Morris, Wendy

2005-05-01

This paper gives an overview of the theory of participatory ergonomics interventions and summary examples from a range of industries, including health care, military, manufacturing, production and processing, services, construction and transport. The definition of participatory approaches includes interventions at macro (organizational, systems) levels as well as micro (individual), where workers are given the opportunity and power to use their knowledge to address ergonomic problems relating to their own working activities. Examples are given where a cost-effective benefit has been measured using musculoskeletal sickness absence and compensation costs. Other examples, using different outcome measures, also showed improvements, for example, an increase in productivity, improved communication between staff and management, reduction in risk factors, the development of new processes and new designs for work environments and activities. Three cases are described from Canada and Japan where the participatory project was led by occupational health teams, suggesting that occupational health practitioners can have an important role to play in participatory ergonomics projects.

Participatory ergonomics intervention in an industrially developing country--a case study.

Science.gov (United States)

Helali, Faramarz; Lönnroth, Emma-Christin; Shahnavaz, Houshang

2008-01-01

In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.

Self-assessment of ergonomics amongst dental students utilising photography: RCT.

Science.gov (United States)

Partido, B B; Wright, B M

2018-03-02

Dental professionals are at high risk of musculoskeletal disorders (MSDs) due to static working positions for extended periods of time. Musculoskeletal pain has been identified as early as during their entry-level dental education. The purpose of this study was to determine whether feedback involving photography and self-assessment would improve ergonomic scores and the accuracy of ergonomic self-assessments amongst dental students. The study involved a randomised control design of 135 dental students. At weeks 1 and 4, participants were photographed, and at weeks 1 through 4, participants completed ergonomic self-evaluations, using a Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks 2 and 3, participants in the training group were photographed and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were evaluated for ergonomic scores by two raters. A mixed-design ANOVA of ergonomic scores revealed that ergonomic scores improved for all students who received the ergonomics training (F(1,254)=17.41, P < .001). In addition, a mixed-design ANOVA of kappa coefficient values between student and rater scores revealed that the accuracy of self-assessments improved for all students who received the ergonomics training (F(1,127)=6.33, P < .05). The use of photographs and self-assessment provides dental and dental hygiene educators with a pragmatic method to improve self-assessment skills, increase student awareness of any postural deviations from ideal and improve musculoskeletal health. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Is a participatory approach effective to stimulate using ergonomic measures?

NARCIS (Netherlands)

Molen, H.F. van der; Sluiter, J.K.; Hulshof, C.T.J.; Vink, P.; Duivenbooden, J.C. van; Holman, R.; Frings-Dresen, M.H.W.

2006-01-01

The objective of this study was to examine the effect of a participatory ergonomics (PE) implementation strategy on the use of ergonomic measures reducing the physical work demands of construction work. The ergonomic measures consisted of adjusting working height (two measures) and mechanising the

Elementary Ergonomics

Science.gov (United States)

Grayson, Jennifer

2009-01-01

What's the number 1 threat to young students using computers today? According to Dan Odell, Microsoft's in-house ergonomist, when he asked parents this very question, "the things they were most concerned about were online predators and people taking advantage of their kids. Ergonomics was fairly far down the list." Unfortunately, that…

Fitting methods to paradigms: are ergonomics methods fit for systems thinking?

Science.gov (United States)

Salmon, Paul M; Walker, Guy H; M Read, Gemma J; Goode, Natassia; Stanton, Neville A

2017-02-01

The issues being tackled within ergonomics problem spaces are shifting. Although existing paradigms appear relevant for modern day systems, it is worth questioning whether our methods are. This paper asks whether the complexities of systems thinking, a currently ubiquitous ergonomics paradigm, are outpacing the capabilities of our methodological toolkit. This is achieved through examining the contemporary ergonomics problem space and the extent to which ergonomics methods can meet the challenges posed. Specifically, five key areas within the ergonomics paradigm of systems thinking are focused on: normal performance as a cause of accidents, accident prediction, system migration, systems concepts and ergonomics in design. The methods available for pursuing each line of inquiry are discussed, along with their ability to respond to key requirements. In doing so, a series of new methodological requirements and capabilities are identified. It is argued that further methodological development is required to provide researchers and practitioners with appropriate tools to explore both contemporary and future problems. Practitioner Summary: Ergonomics methods are the cornerstone of our discipline. This paper examines whether our current methodological toolkit is fit for purpose given the changing nature of ergonomics problems. The findings provide key research and practice requirements for methodological development.

What price ergonomics?

OpenAIRE

Stanton, NA; Young, MS

1999-01-01

Ergonomists have a say in the design of almost everything in the modern world, but there is little evidence that their methods actually work. Here is an evaluation of those methods and of the worth of ergonomics in design.

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery.

Science.gov (United States)

Lee, Mija Ruth; Lee, Gyusung Isaiah

2017-09-01

To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ² test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (pergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (pergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (pergonomics were microphone/speaker, pedal design, and finger clutch. More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. Copyright © 2017. Asian Society of Gynecologic Oncology, Korean Society of Gynecologic Oncology

Toward a transdisciplinary approach of ergonomic design for sustainability.

Science.gov (United States)

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

Ergonomics and information technique

International Nuclear Information System (INIS)

Krueger, H.

1985-01-01

Ergonomics are an essential safety factor in controlling automated processes. It has to be taken into account in three stages: information presentation, information perception and information treatment

A trend analysis of ergonomic research themes in Taiwan.

Science.gov (United States)

Lin, Chih-Long

2015-01-01

This paper examines the development of ergonomics in Taiwan by analysing 1404 scientific articles published by 113 permanent members of the Ergonomics Society of Taiwan (EST). Each article was classified by key words and abstract content. Each article was also coded by period of publication (1971-1992 (first period), 1993-1997 (second period), 1998-2002 (third period), 2003-2007 (fourth period), and 2008-2012 (fifth period), and against 13 topic categories. The results show that rate of publication has increased by approximately 100 articles every five years since 1993.The most popular topic was ergonomics assessment and analysis techniques in the first period, force exertion-related research in the second period, product design and evaluation in the third period, occupational safety and health in the fourth period and human-computer interface in the fifth period. Each of these is highly relevant to current contemporary issues around the world. Finally, potential areas for future ergonomics research in Taiwan are discussed. This study investigates the trends in academic papers published by members of the EST. Over time, topics have shifted from ergonomics evaluation methods to occupational safety and health, and human–computer interaction. The findings should be considered as important references for planning the future of ergonomics in Taiwan.

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

Science.gov (United States)

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

Following ergonomics guidelines decreases physical and cardiovascular workload during cleaning tasks

DEFF Research Database (Denmark)

Samani, Afshin; Holtermann, Andreas; Søgaard, Karen

2012-01-01

The aim was to investigate the effect of ergonomics guidelines on muscular activity, postural and cardiovascular load during cleaning. Eighteen cleaners performed 10 min of cleaning tasks in two locations; three min in a laboratory and seven min in a lecture room. All participants performed...... the task with or without focusing on ergonomics guidelines (ergonomics/non-ergonomics session). Bipolar surface electromyography was recorded bilaterally from upper trapezius and erector spinae muscles. A tri-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes......, and the cardiovascular load was estimated by electrocardiogram. Ergonomics sessions resulted in lower muscular load, a more complex pattern of muscular activity, lower range of motion and angular velocity of the trunk as well as lower cardiovascular load compared with non-ergonomics sessions (p ...

[Pressing problems of labor hygiene and occupational pathology among office workers].

Science.gov (United States)

Dudarev, A A; Sorokin, G A

2012-01-01

Northwest public health research center, Ministry of health and social affairs, St.-Petersburg. The article substantiates the conception of "office room", "office worker", estimates the basic diseases and symptoms among office workers (SBS-syndrome, BRI-illnesses, BRS-symptoms). Complex of indoor factors of office environment are analyzed, which influence the health status of personnel--indoor air quality (microclimate, aerosols, chemical, biological pollution, air ionization), external physical factors, ergonomics, intensity and tension of work, psychosocial factors. Comparison of Russian and foreign approaches to the hygienic estimation and rating of these factors was carried out. Owing to inadequacy of Russian hygienic rules to modern requirements, the necessity of working out of a complex of sanitary rules focused particularly on office workers is proved.

Sit-stand desks in call centres: associations of use and ergonomics awareness with sedentary behavior.

Science.gov (United States)

Straker, Leon; Abbott, Rebecca A; Heiden, Marina; Mathiassen, Svend Erik; Toomingas, Allan

2013-07-01

To investigate whether or not use of sit-stand desks and awareness of the importance of postural variation and breaks are associated with the pattern of sedentary behavior in office workers. The data came from a cross-sectional observation study of Swedish call centre workers. Inclinometers recorded 'seated' or 'standing/walking' episodes of 131 operators over a full work shift. Differences in sedentary behavior based on desk type and awareness of the importance of posture variation and breaks were assessed by non-parametric analyses. 90 (68.7%) operators worked at a sit-stand desk. Working at a sit-stand desk, as opposed to a sit desk, was associated with less time seated (78.5 vs 83.8%, p = 0.010), and less time taken to accumulate 5 min of standing/walking (36.2 vs 46.3 min, p = 0.022), but no significant difference to sitting episode length or the number of switches between sitting and standing/walking per hour. Ergonomics awareness was not associated with any sedentary pattern variable among those using a sit-stand desk. Use of sit-stand desks was associated with better sedentary behavior in call centre workers, however ergonomics awareness did not enhance the effect. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Validating a framework for participatory ergonomics (the PEF)

NARCIS (Netherlands)

Haines, H.; Wilson, J.R.; Vink, P.; Koningsveld, E.

2002-01-01

Participatory ergonomics is reported in an increasing number of case studies, but there is little evidence of emerging supportive theory and relatively little generic advice or guidance. The paper describes an effort to provide clarity and organization to the field of participatory ergonomics. A

Re-education of good ergonomics in nursing for Suomikoti

OpenAIRE

Isoheiko, Johanna

2016-01-01

The aim of this thesis was to promote and “refresh” the good ergonomics in nursing for Suomikoti in Sweden. The author noticed the need for re-education or “refreshment” of the nursing ergonomics among the permanent personnel as well updating knowledge of functioning of the existing assistive devices. Suomikoti has already a good and comprehensive transfer and ergonomics education and practical training for new employees arranged by their own physiotherapist and occupational therapist. It cov...

The ergonomics of command and control

OpenAIRE

Stanton, NA; Baber, C

2006-01-01

Since its inception, just after the Second World War, ergonomics research has paid special attention to the issues surrounding human control of systems. Command and Control environments continue to represent a challenging domain for Ergonomics research. We take a broad view of Command and Control research, to include C2 (Command and Control), C3 (Command, Control and Communication), and C4 (Command, Control, Communication and Computers) as well as human supervisory control paradigms. This spe...

Successful integration of ergonomics into continuous improvement initiatives.

Science.gov (United States)

Monroe, Kimberly; Fick, Faye; Joshi, Madina

2012-01-01

Process improvement initiatives are receiving renewed attention by large corporations as they attempt to reduce manufacturing costs and stay competitive in the global marketplace. These initiatives include 5S, Six Sigma, and Lean. These programs often take up a large amount of available time and budget resources. More often than not, existing ergonomics processes are considered separate initiatives by upper management and struggle to gain a seat at the table. To effectively maintain their programs, ergonomics program managers need to overcome those obstacles and demonstrate how ergonomics initiatives are a natural fit with continuous improvement philosophies.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria.

Science.gov (United States)

Oladeinde, B H; Ekejindu, I M; Omoregie, R; Aguh, O D

2015-01-01

Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT(®). Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated.

Ergonomics and control room design

International Nuclear Information System (INIS)

Williams, J.C.; Story, D.T.

1987-01-01

The application of ergonomic principles to the design process and some aspects of the Sizewell B control room is discussed. Also outlined is the management process which ensures that these principles are applied systematically throughout the design development activity and highlights the functional requirements which must also be met in the creation of a total man-machine system package which meets all the technical design criteria. The ergonomics requirements are part of this process and extend into all aspects of design ranging from such matters as workplace organization to environmental factors, social engineering, communications and aesthetics. (author)

Ergonomic intervention for employed persons with rheumatic conditions.

Science.gov (United States)

Allaire, Saralynn J; Backman, Catherine L; Alheresh, Rawan; Baker, Nancy A

2013-01-01

Prior articles in this series on employment and arthritis have documented the major impact arthritis and other rheumatic conditions have on employment. As expected, physically demanding job tasks, including hand use, are substantial risk factors for work limitation. Computer use has been increasing. People with arthritis may choose occupations involving extensive computer use to avoid occupations with other physical demands. But studies show many people with arthritis conditions have difficulty using computers.Ergonomic assessment and implementation helps relieve the physical and other demands of jobs. The Ergonomic Assessment Tool for Arthritis (EATA) is specifically for people with arthritis conditions. Since the EATA can be conducted off worksite, it is feasible to use with workers not wishing to disclose their condition to their employer. Available research supports the effectiveness of ergonomic intervention as a viable method to reduce work limitation for persons with arthritis. Some workers will need additional vocational intervention to remain employed long term. However, ergonomic intervention is a useful first step, as it promotes awareness of arthritis effects on work activities. Assisting workers with arthritis or other rheumatic conditions to use ergonomics to enhance their ability to work well should be an important aspect of managing these conditions.

[Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

Science.gov (United States)

Guo, M J; Liu, J J; Yao, H Y

2016-08-10

Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

Nature: a new paradigm for well-being and ergonomics.

Science.gov (United States)

Richardson, Miles; Maspero, Marta; Golightly, David; Sheffield, David; Staples, Vicki; Lumber, Ryan

2017-02-01

Nature is presented as a new paradigm for ergonomics. As a discipline concerned with well-being, the importance of natural environments for wellness should be part of ergonomics knowledge and practice. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being. Further, an emerging body of research has found relationships between well-being and a connection to nature, a concept that reveals the integrative character of human experience which can inform wider practice and epistemology in ergonomics. Practitioners are encouraged to bring nature into the workplace, so that ergonomics keeps pace with the move to nature-based solutions, but also as a necessity in the current ecological and social context. Practitioner Summary: Nature-based solutions are coming to the fore to address societal challenges such as well-being. As ergonomics is concerned with well-being, there is a need for a paradigm shift in the discipline. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being.

Evolutionary adaptations: theoretical and practical implications for visual ergonomics.

Science.gov (United States)

Fostervold, Knut Inge; Watten, Reidulf G; Volden, Frode

2014-01-01

The literature discussing visual ergonomics often mention that human vision is adapted to light emitted by the sun. However, theoretical and practical implications of this viewpoint is seldom discussed or taken into account. The paper discusses some of the main theoretical implications of an evolutionary approach to visual ergonomics. Based on interactional theory and ideas from ecological psychology an evolutionary stress model is proposed as a theoretical framework for future research in ergonomics and human factors. The model stresses the importance of developing work environments that fits with our evolutionary adaptations. In accordance with evolutionary psychology, the environment of evolutionary adaptedness (EEA) and evolutionarily-novel environments (EN) are used as key concepts. Using work with visual display units (VDU) as an example, the paper discusses how this knowledge can be utilized in an ergonomic analysis of risk factors in the work environment. The paper emphasises the importance of incorporating evolutionary theory in the field of ergonomics. Further, the paper encourages scientific practices that further our understanding of any phenomena beyond the borders of traditional proximal explanations.

Integrating ergonomics into the product development process

DEFF Research Database (Denmark)

Broberg, Ole

1997-01-01

and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

Ergonomic considerations in school environments - the need for widening the scope.

Science.gov (United States)

Jayaratne, Kapila

2012-01-01

Behaviour patterns specific to children pose them at greater risk of environmental hazards than adults. Ergonomics is the science of matching human interaction with the proximate environment. Conventionally ergonomic principles were applied on adult work places to ensure safety of the working environment. With emerging scientific evidence, school environments are being a focus to apply ergonomic principles. Children spend more time within schools during critical developmental stages of their life. Everybody feels that the schools are safe places, but they are not. A multitude of ergonomic hazards have been identified in school settings. Widespread mismatches between anthropometry and school furniture, heavy schoolbag carriage and unhealthy bag behaviour are significant. Negative effects range from general tiredness, musculoskeletal pains, spinal deviations, shoulder level shifts, injuries and psychological disturbances. There are fragmented efforts to widen ergonomic concepts to health care professionals and other stakeholders of child health. Addressing ergonomic issues will ensure that children, the future productive generation contributing to economic growth and development of a country, are provided with opportunities in a healthy environment. This paper emphasizes the need for a concerted effort on widening the scope of ergonomics to cater for the evolving demand.

Ergonomics in the operating room.

Science.gov (United States)

Janki, Shiromani; Mulder, Evalyn E A P; IJzermans, Jan N M; Tran, T C Khe

2017-06-01

Since the introduction of minimally invasive surgery, surgeons appear to be experiencing more occupational musculoskeletal injuries. The aim of this study is to investigate the current frequency and effects of occupational musculoskeletal injuries on work absence. An online questionnaire was conducted among all surgeons affiliated to the Dutch Society for Endoscopic Surgery, Gastrointestinal Surgery, and Surgical Oncology. In addition, this survey was conducted among surgeons, gynaecologists, and urologists of one cluster of training hospitals in the Netherlands. There were 127 respondents. Fifty-six surgeons currently suffer from musculoskeletal complaints, and 30 have previously suffered from musculoskeletal complaints with no current complaints. Frequently reported localizations were the neck (39.5 %), the erector spinae muscle (34.9 %), and the right deltoid muscle (18.6 %). Most of the musculoskeletal complaints were present while operating (41.8 %). Currently, 37.5 % uses medication and/or therapy to reduce complaints. Of surgeons with past complaints, 26.7 % required work leave and 40.0 % made intraoperative adjustments. More surgeons with a medical history of musculoskeletal complaints have current complaints (OR 6.1, 95 % CI 1.9-19.6). There were no significant differences between surgeons of different operating techniques in localizations and frequency of complaints, or work leave. Despite previous various ergonomic recommendations in the operating room, the current study demonstrated that musculoskeletal complaints and subsequent work absence are still present among surgeons, especially among surgeons with a positive medical history for musculoskeletal complaints. Even sick leave was necessary to fully recover. There were no significant differences in reported complaints between surgeons of different operating techniques. Almost half of the respondents with complaints made intraoperative ergonomic adjustments to prevent future complaints. The

Workplace ergonomics in lean production environments: A literature review.

Science.gov (United States)

Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

2015-01-01

Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

Implementation of ergonomics in a service unit: challenges and advances.

Science.gov (United States)

Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

2012-01-01

This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

Aplicaciones del cemento reforzado con fibra de vidrio (GRC

Directory of Open Access Journals (Sweden)

Barros Llerena, Ángel

1981-12-01

Full Text Available Not available.

El presente artículo tiene como objeto dar a conocer la utilización de fibras de vidrio como refuerzo de los cementos. Se da una breve reseña histórica, se mencionan sus características y comportamiento. Además se presenta un caso práctico y reciente de utilización en la fabricación de elementos de fachada del Estadio «Santiago Bernabéu» del Real Madrid C. de F., y se completa con una relación de los actuales y futuros usos del G.R.C. (glass reinforced cement, denominación inglesa del material más comúnmente utilizado.

Ergonomía. Vol. 1, Fundamentos

OpenAIRE

Rodríguez Mondelo, Pedro Manuel; Gregori Torada, Enrique; Barrau Bombardó, Pedro

2001-01-01

La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

Ergonomics Integration Omproving Production Process Management in Enterprises of Latvia

OpenAIRE

Henrijs Kaļķis

2013-01-01

Dotoral thesis ERGONOMICS INTEGRATION IMPROVING PRODUCTION PROCESS MANAGEMENT IN ENTERPRISES OF LATVIA ANNOTATION Ergonomics integration in process management has great significance in organisations` growth of productivity. It is a new approach to entrepreneurship and business strategy, where ergonomic aspects and values are taken into account in ensuring the effective process management and profitability of enterprises. This study is aimed at solution of the problem of e...

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria

Science.gov (United States)

Oladeinde, BH; Ekejindu, IM; Omoregie, R; Aguh, OD

2015-01-01

Background: Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. Aim: This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. Subjects and Methods: A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT®. Results: Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Conclusions: Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated. PMID:27057381

Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

Science.gov (United States)

Smith, Michael J; Bayehi, Antoinette Derjani

2003-01-15

This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

Ergonomics and its application to Sizewell 'B'

International Nuclear Information System (INIS)

Singleton, W.T.

1986-01-01

The scope of the ergonomics contribution to the design and operation of power stations is described on the basis of current experience in the CEGB and in other countries. The ergonomics questions which arise in relation to Sizewell 'B' are enumerated in detail. Issues which arise from the point of view of station operation and from the complementary point of view of human behaviour are considered. (author)

Ergonomic Conditions in Small Manufacturing Industries

Directory of Open Access Journals (Sweden)

Ashraf A. Shikdar

2001-12-01

Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

Ergonomic deficits in robotic gynecologic oncology surgery: a need for intervention.

Science.gov (United States)

Craven, Renatta; Franasiak, Jason; Mosaly, Prithima; Gehrig, Paola A

2013-01-01

To evaluate surgeon strain using validated ergonomic assessment tools. Observational study (Canadian Task Force classification III). Academic medical center. Robotic surgeons performing gynecologic oncology surgical procedures. Videotape footage of surgeons performing robotic gynecologic oncology procedures was obtained. A human factors engineer experienced with health care ergonomics analyzed the video recordings and performed ergonomic evaluations of the surgeons. An initial evaluation was conducted using the Rapid Upper Limb Assessment (RULA) survey, an ergonomic assessment and prioritization method for determining posture, force, and frequency concerns with focus on the upper limbs. A more detailed analysis followed using the Strain Index (SI) method, which uses multiplicative interactions to identify jobs that are potentially hazardous. Seventeen hours of video recordings were analyzed, and descriptive data based on RULA/SI analysis were collected. Ergonomic evaluation of surgeon activity resulted in a mean RULA score of 6.46 (maximum possible RULA score, 7), indicating a need for further investigation. The mean SI grand score was 24.34. SI scores >10 suggest a potential for hazard to the operator. Thus, the current use of the surgical robot is potentially dangerous with regards to ergonomic positioning and should be modified. At a high-volume robotics center, there are ergonomics deficits that are hazardous to gynecologic surgeons and suggest the need for modification and intervention. A training strategy must be developed to address these ergonomic issues and knowledge deficiencies. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Ergonomics research methods

Science.gov (United States)

Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

1973-01-01

Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

Occupational ergonomics in space

Science.gov (United States)

Stramler, J.

1992-01-01

Ergonomics is often defined simply as the study of work. Related or synonymous terms include human factors, human engineering, engineering psychology, and others. Occupational ergonomics is a term that has been proposed to describe the study of the working environment, including the physical consequences resulting from having an improperly designed workplace. The routine space working environment presents some problems not found in the typical Earthbound workplace. These include radiation, intravehicular contamination/pollution, temperature extremes, impact with other objects, limited psychosocial relationships, sensory deprivation, and reduced gravity. These are important workplace considerations, and may affect astronauts either directly at work or at some point during their life as a result of their work under these conditions. Some of the major issues associated with each of these hazards are presented.

ERGONOMIC DESIGN RECOMMENDATIONS BASED ON AN ACTUAL CHAINSAW DESIGN

Directory of Open Access Journals (Sweden)

J. Kaljun

2012-01-01

Full Text Available

ENGLISH ABSTRACT: To develop high quality products, a designer has to consider various influential factors, one of which is ergonomics. And to fashion a specific product for the user, a designer needs expert knowledge of the user’s requirements. However, expert knowledge can also be accessed through an intelligent advisory system for ergonomic design support. The effectiveness of such an expert system depends mainly on the quality of the knowledge base and on the appropriateness of the system's inference engine. Data for the system’s knowledge base can be collected in different ways. One approach is to study relevant projects to collect appropriate ergonomic solutions; another is to recognise bottlenecks in ergonomic design. This paper presents a case study of the design of an actual chainsaw – with emphasis on ergonomic design solutions – that can be transformed into ergonomic design recommendations. At the end of the paper, an application of one of the derived recommendations within the knowledge base of the intelligent advisory system is presented.

AFRIKAANSE OPSOMMING: By die ontwerp van gehaltegoedere moet aandag gegee word aan verskeie faktore soos die Ergonomie. Die produkontwerper moet deeglike kennis dra van die verbruikersbehoeftes. Daarbenewens moet hy liefs ook gebruik maak van ’n intelligente sisteem vir ontwerphulp. Die navorsing is toegespits op datasteun vir ’n kettingsaagontwerp en toon hoe die intelligente sisteem betekenisvolle ondersteuning verleen.

Ergonomics Climate Assessment: A measure of operational performance and employee well-being.

Science.gov (United States)

Hoffmeister, Krista; Gibbons, Alyssa; Schwatka, Natalie; Rosecrance, John

2015-09-01

Ergonomics interventions have the potential to improve operational performance and employee well-being. We introduce a framework for ergonomics climate, the extent to which an organization emphasizes and supports the design and modification of work to maximize both performance and well-being outcomes. We assessed ergonomics climate at a large manufacturing facility twice during a two-year period. When the organization used ergonomics to promote performance and well-being equally, and at a high level, employees reported less work-related pain. A larger discrepancy between measures of operational performance and employee well-being was associated with increased reports of work-related pain. The direction of this discrepancy was not significantly related to work-related pain, such that it didn't matter which facet was valued more. The Ergonomics Climate Assessment can provide companies with a baseline assessment of the overall value placed on ergonomics and help prioritize areas for improving operational performance and employee well-being. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Participatory ergonomics among female cashiers from a department store.

Science.gov (United States)

Cristancho, María Yanire León

2012-01-01

The objective of this paper was to control ergonomic risks among female cashiers working in a department store belonging to the retail market. This study was conducted between May and November 2010. Participatory ergonomics was applied through knowing and understanding how the company works, establishing the work team (Ergo group), training the team in ergonomics-related topics, and making decisions and interventions. The sample was composed of 71 participants--mostly female cashiers--, and all of them have a musculoskeletal compromise, declaring pain or discomfort mainly in the neck, lower back, right wrist and shoulders. Among others, following problems were found: postural overload, repetitive work, manual load handling, mental fatigue, environmental discomfort, variable work schedules, extended working days, and absence of breaks. In the intervention, the main implemented changes were the redesign of workstation, complete change of chairs and keyboards, and the implementation of a rotation system, as well breaks for compensatory exercises. After that, an evident improvement of found problems was observed, therefore it can be concluded that participatory ergonomics is an attractive methodology, appropriate and efficient for solving and controlling ergonomic risks and problems.

Integrating ergonomics into engineering design: the role of objects.

Science.gov (United States)

Hall-Andersen, Lene Bjerg; Broberg, Ole

2014-05-01

The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between different knowledge domains, while the aim of an intermediary object is to circulate knowledge and thus produce a distant effect. Adjustable layout drawings served as boundary objects and had a positive impact on the dialog between an ergonomist and designers. An ergonomic guideline document was identified as an intermediary object. However, when the ergonomic guidelines were circulated in the design process, only some of the guidelines were transferred to the design of the sterile processing plant. Based on these findings, recommendations for working with objects in design processes are included. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-01-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-05-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG&G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG&G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

Human Factors And Ergonomics In The Planning Of Production

DEFF Research Database (Denmark)

Jensen, Per Langå

2002-01-01

For year’s integration of ergonomics into the planning of new production processes has been an ideal for regulating agencies supported by ergonomic experts. But the ideal appears to be difficult to live up to. A development of tools both by agencies and by groups of researchers has been seen...... of organizational conditions for giving ergonomics a stronger position in the firm. Ergonomists have to tackle these issues, but it implies a new understanding of their roles, which goes beyond the traditional discussion of expert versus facilitator. The paper is based on an evaluation of a Swedish research......-programme of a new approach to intervention studies on musculosceletaldiseases, on a major Danish research programme on integrating ergonomics (working environment) into the planning activities of the enterprises and on discussions with the staff of the Danish mandatory occupational health and safety services...

A study on the ergonomic assessment in the workplace

Science.gov (United States)

Tee, Kian Sek; Low, Eugene; Saim, Hashim; Zakaria, Wan Nurshazwani Wan; Khialdin, Safinaz Binti Mohd; Isa, Hazlita; Awad, M. I.; Soon, Chin Fhong

2017-09-01

Ergonomics has gained attention and take into consideration by the workers in the different fields of works recently. It has given a huge impact on the workers comfort which directly affects the work efficiency and productivity. The workers have claimed to suffer from the painful postures and injuries in their workplace. Musculoskeletal disorders (MSDs) is the most common problem frequently reported by the workers. This problem occurs due to the lack of knowledge and alertness from the workers to the ergonomic in their surroundings. This paper intends to review the approaches and instruments used by the previous works of the researchers in the evaluation of the ergonomics. The two main assessment methods often used for ergonomic evaluation are Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). Popular devices are Inertial Measurement Units (IMU) and Microsoft Kinect.

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

Science.gov (United States)

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

Process and implementation of participatory ergonomic interventions: a systematic review.

Science.gov (United States)

van Eerd, Dwayne; Cole, Donald; Irvin, Emma; Mahood, Quenby; Keown, Kiera; Theberge, Nancy; Village, Judy; St Vincent, Marie; Cullen, Kim

2010-10-01

Participatory ergonomic (PE) interventions may vary in implementation. A systematic review was done to determine the evidence regarding context, barriers and facilitators to the implementation of participatory ergonomic interventions in workplaces. In total, 17 electronic databases were searched. Data on PE process and implementation were extracted from documents meeting content and quality criteria and synthesised. The search yielded 2151 references. Of these, 190 documents were relevant and 52 met content and quality criteria. Different ergonomic teams were described in the documents as were the type, duration and content of ergonomic training. PE interventions tended to focus on physical and work process changes and report positive impacts. Resources, programme support, ergonomic training, organisational training and communication were the most often noted facilitators or barriers. Successful PE interventions require the right people to be involved, appropriate ergonomic training and clear responsibilities. Addressing key facilitators and barriers such as programme support, resources, and communication is paramount. STATEMENT OF RELEVANCE: A recent systematic review has suggested that PE has some effect on reducing symptoms, lost days of work and claims. Systematic reviews of effectiveness provide practitioners with the desire to implement but do not provide clear information about how. This article reviews the literature on process and implementation of PE.

Office of Equal Opportunity Programs

Science.gov (United States)

Chin, Jennifer L.

2004-01-01

The NASA Glenn Office of Equal Opportunity Programs works to provide quality service for all programs and/or to assist the Center in becoming a model workplace. During the summer of 2004, I worked with Deborah Cotleur along with other staff members to create and modify customer satisfaction surveys. This office aims to assist in developing a model workplace by providing functions as a change agent to the center by serving as an advisor to management to ensure equity throughout the Center. In addition, the office serves as a mediator for the Center in addressing issues and concerns. Lastly, the office provides assistance to employees to enable attainment of personal and organizational goals. The Office of Equal Opportunities is a staff office which reports and provides advice to the Center Director and Executive Leadership, implements laws, regulations, and presidential executive orders, and provides center wide leadership and assistance to NASA GRC employees. Some of the major responsibilities of the office include working with the discrimination complaints program, special emphasis programs (advisory groups), management support, monitoring and evaluation, contract compliance, and community outreach. During my internship in this office, my main objective was to create four customer satisfaction surveys based on EO retreats, EO observances, EO advisory boards, and EO mediation/counseling. I created these surveys after conducting research on past events and surveys as well as similar survey research created and conducted by other NASA centers, program for EO Advisory group members, leadership training sessions for supervisors, preventing sexual harassment training sessions, and observance events. I also conducted research on the style and format from feedback surveys from the Marshall Equal Opportunity website, the Goddard website, and the main NASA website. Using the material from the Office of Equal Opportunity Programs at Glenn Research Center along with my

SUCCESS FRAMEWORK FOR TEACHING ERGONOMICS TO ENGINEERING STUDENTS

Directory of Open Access Journals (Sweden)

MUSHTAK AL-ATABI

2013-04-01

Full Text Available Taylor's University School of Engineering (Malaysia is a project-based-learning school that puts a conscious effort to educate engineers on the importance of applying ergonomic principles at the conceiving and designing stages of a product life cycle. This paper reports on an innovative approach to teaching ergonomics using the SUCCESS framework (Simple, Unexpected, Credible, Concrete, Emotions, Story, and Simulation. This teaching technique was adopted to engage the hearts and minds of the students and get them to embrace ergonomics as an important skill for engineers. Comparing students’ module evaluation and feedback, both before and after the adoption of the SUCCESS framework showed that students enjoyed the new approach of teaching and found it more fulfilling.

[Nursing work and ergonomics].

Science.gov (United States)

Marziale, M H; Robazzi, M L

2000-12-01

This text articulates empirical evidence resulting from scientific work with the intention of providing a reflection about the application of ergonomics as a methodological instrument to support improvement of the labor conditions of nursing personnel in hospitals.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Ergonomics in an oral pathology laboratory: Back to basics in microscopy.

Science.gov (United States)

Sundaragiri, Krishna Sireesha; Shrivastava, Shikha; Sankhla, Bharat; Bhargava, Akshay

2014-09-01

Ergonomics is simply a science focused on "study of work" to reduce fatigue and discomfort through product design. A comprehensive ergonomics program for the pathology laboratory has become necessary to prevent the occurrence of work related musculoskeletal disorders (MSDs) and accidents. Most of the literature on ergonomics involve various web links or occasional studies on the effect of laboratory work and associated MSDs. A Google search was carried out corresponding to the terms "ergonomics", "pathology laboratory", "microscope". All the relevant literature from web sources was sorted out and categorized. In this review, we intend to identify basic anthropometric factors, biomechanical risk factors, laboratory design considerations and specific microscopy-related considerations. The ultimate aim of ergonomics is to provide a safe environment for laboratory personnel to conduct their work and to allow maximum flexibility for safe research use.

Europe Chapter of the Human Factors and Ergonomics Society Meeting

National Research Council Canada - National Science Library

de

2002-01-01

The Final Proceedings for Europe Chapter of the Human Factors and Ergonomics Society Meeting, 7 November 2001 - 9 November 2001 This is an interdisciplinary conference in human factors and ergonomics...

The effectiveness of a training method using self-modeling webcam photos for reducing musculoskeletal risk among office workers using computers.

Science.gov (United States)

Taieb-Maimon, Meirav; Cwikel, Julie; Shapira, Bracha; Orenstein, Ido

2012-03-01

An intervention study was conducted to examine the effectiveness of an innovative self-modeling photo-training method for reducing musculoskeletal risk among office workers using computers. Sixty workers were randomly assigned to either: 1) a control group; 2) an office training group that received personal, ergonomic training and workstation adjustments or 3) a photo-training group that received both office training and an automatic frequent-feedback system that displayed on the computer screen a photo of the worker's current sitting posture together with the correct posture photo taken earlier during office training. Musculoskeletal risk was evaluated using the Rapid Upper Limb Assessment (RULA) method before, during and after the six weeks intervention. Both training methods provided effective short-term posture improvement; however, sustained improvement was only attained with the photo-training method. Both interventions had a greater effect on older workers and on workers suffering more musculoskeletal pain. The photo-training method had a greater positive effect on women than on men. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels.

Science.gov (United States)

Pires, Paulo Roberto de Oliveira Bassil; Rezende, Fagner Fagundes

2012-01-01

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.

Ergonomic analysis of primary and assistant surgical roles.

Science.gov (United States)

Zihni, Ahmed M; Cavallo, Jaime A; Ray, Shuddhadeb; Ohu, Ikechukwu; Cho, Sohyung; Awad, Michael M

2016-06-15

Laparoscopic surgery is associated with a high degree of ergonomic stress. However, the stress associated with surgical assisting is not known. In this study, we compare the ergonomic stress associated with primary and assistant surgical roles during laparoscopic surgery. We hypothesize that higher ergonomic stress will be detected in the primary operating surgeon when compared with the surgical assistant. One right-hand dominant attending surgeon performed 698 min of laparoscopic surgery over 13 procedures (222 min primary and 476 min assisting), whereas electromyography data were collected from bilateral biceps, triceps, deltoids, and trapezius muscles. Data were analyzed in 1-min segments. Average muscle activation as quantified by maximal voluntary contraction (%MVC) was calculated for each muscle group during primary surgery and assisting. We compared mean %MVC values with unpaired t-tests. Activation of right (R) biceps and triceps muscle groups is significantly elevated while operating when compared with assisting (R biceps primary: 5.47 ± 0.21 %MVC, assistant: 3.93 ± 0.11, P ergonomic differences between operating and assisting. Surgical assisting was associated with similar and occasionally higher levels of muscle activation compared with primary operating. These findings suggest that surgical assistants face significant ergonomic stress, just as operating surgeons do. Steps must be taken to recognize and mitigate this stress in both operating surgeons and assistants. Copyright © 2016 Elsevier Inc. All rights reserved.

Effectiveness of computer ergonomics interventions for an engineering company: a program evaluation.

Science.gov (United States)

Goodman, Glenn; Landis, James; George, Christina; McGuire, Sheila; Shorter, Crystal; Sieminski, Michelle; Wilson, Tamika

2005-01-01

Ergonomic principles at the computer workstation may reduce the occurrence of work related injuries commonly associated with intensive computer use. A program implemented in 2001 by an occupational therapist and a physical therapist utilized these preventative measures with education about ergonomics, individualized evaluations of computer workstations, and recommendations for ergonomic and environmental changes. This study examined program outcomes and perceived effectiveness based on review of documents, interviews, and surveys of the employees and the plant manager. The program was deemed successful as shown by 59% of all therapist recommendations and 74% of ergonomic recommendations being implemented by the company, with an 85% satisfaction rate for the ergonomic interventions and an overall employee satisfaction rate of 70%. Eighty-one percent of the physical problems reported by employees were resolved to their satisfaction one year later. Successful implementation of ergonomics programs depend upon effective communication and education of the consumers, and the support, cooperation and collaboration of management and employees.

Optimizing the physical ergonomics indices for the use of partial pressure suits.

Science.gov (United States)

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

SME Worker Affective (SWA) index based on environmental ergonomics

Science.gov (United States)

Ushada, M.; Kusuma Aji, G.; Okayama, T.; Khidir, M.

2018-04-01

Small-Medium sized (SME) is a focal type of Indonesian industry which contributes to national emerging economies. Indonesian goverment has developed employee social security system (BPJS Ketenagakerjaan) to support worker quality of life. However, there were limited research which could assist BPJS Ketenagakerjaan in evaluating worker quality of life. Worker quality of life could be categorized as the highest worker needs or affective states. SME Worker Affective (SWA) index is being concerned as a basic tool to make balance between worker performance and quality of life in workstation of SMEs. The research objectives are: 1) To optimize the environmental ergonomics in SMEs; 2) To quantify SME Worker Affective (SWA) index based on optimized environmental ergonomics. The research advantage is to support Indonesian goverment in monitoring SMEs good practices to its worker quality of life. Simulated annealing optimized the heart rate and environmental ergonomics parameters. SWA index was determined based on comparison between optimized heart rate and environmental ergonomics parameters. SWA index were quantified for 380 data of worker. The evaluation indicated 51.3% worker in affective and 48.7% in non-affective condition. Research results indicated that stakeholders of SMEs should put more attention on environmental ergonomics and worker affective.

Ergonomics and sustainability in the design of everyday use products.

Science.gov (United States)

Tosi, Francesca

2012-01-01

The relationship between Ergonomics and Design is a key element in the sustainability project, as well as in many other areas of experimental design. In the Design for Sustainability field, Ergonomics is a strategic factor for design culture innovation, providing designers with the necessary knowledge and skills regarding human characteristics and capabilities, as well as user needs and desires during use and interaction with products in work activities and everyday life. Ergonomics is also a strategic innovative factor in design development and manufacturing processes. In fact, ergonomics provides a methodological approach in user-product interaction evaluation processes through the use of participatory design and survey methods, user trials, direct observation, savings and resource conservation, etc.On the other hand, design offers solutions able to interpret user needs and expectations, at the same time suggesting new behaviors and lifestyles.In Design for Sustainability, the ergonomic and user-centered approach contributes greatly to lifestyles and innovative use of products--making it possible to understand and interpret real people needs and expectations in their everyday actions and behavior.New consumption patterns, new awareness of lifestyles, energy source consumption, purchasing methods and consumption style etc. can be supported by design innovation, responding to expressed and unexpressed user needs. With this in mind, the ergonomic approach represents the starting point for design choices and at the same time, a tool for assessing their appropriateness and effectiveness.

The good, the bad, and the future: on the archaeology of ergonomics.

Science.gov (United States)

Moray, Neville

2008-06-01

This article places the 50th anniversary edition of the Human Factors journal in a historical context. It is appropriate to celebrate the 50th anniversary of the founding of Human Factors and the Human Factors and Ergonomics Society, but in so doing, we celebrate only the recent history of ergonomics. By digging into the history of ergonomics, we can better understand the evolution of method, practice, and concepts in the human factors discipline. One develops a greater admiration for early practitioners of human factors and ergonomics, as well as the importance of history. Some satisfaction about the rise, evolution, and fall of ergonomic ideas is justified. "If I have seen further..." We can better define the starting point for the next 50 years.

Reconfiguration of NASA GRC's Vacuum Facility 6 for Testing of Advanced Electric Propulsion System (AEPS) Hardware

Science.gov (United States)

Peterson, Peter Y.; Kamhawi, Hani; Huang, Wensheng; Yim, John T.; Haag, Thomas W.; Mackey, Jonathan A.; McVetta, Michael S.; Sorrelle, Luke T.; Tomsik, Thomas M.; Gilligan, Ryan P.;

A workplace exercise versus health promotion intervention to prevent and reduce the economic and personal burden of non-specific neck pain in office personnel

DEFF Research Database (Denmark)

Johnston, V; O'Leary, S; Comans, T

2014-01-01

practice ergonomic and neck exercise program reduce productivity losses and risk of developing neck pain in asymptomatic workers, or decrease severity of neck pain in symptomatic workers, compared to a best practice ergonomics and general health promotion program? DESIGN: Prospective cluster randomised......INTRODUCTION: Non-specific neck pain is a major burden to industry, yet the impact of introducing a workplace ergonomics and exercise intervention on work productivity and severity of neck pain in a population of office personnel is unknown. RESEARCH QUESTION: Does a combined workplace-based best...... ergonomics intervention plus 1-hour weekly health information sessions for 12 weeks. MEASUREMENTS: Primary (productivity loss) and secondary (neck pain and disability, muscle performance, and quality of life) outcome measures will be collected using validated scales at baseline, immediate post...

System ergonomics as an approach to improve human reliability

International Nuclear Information System (INIS)

Bubb, H.

1988-01-01

The application of system technics on ergonomical problems is called system ergonomics. This enables improvements of human reliability by design measures. The precondition for this is the knowledge of how information processing is performed by man and machine. By a separate consideration of sensory processing, cognitive processing, and motory processing it is possible to have a more exact idea of the system element 'man'. The system element 'machine' is well described by differential equations which allow an ergonomical assessment of the manouverability. The knowledge of information processing of man and machine enables a task analysis. This makes appear on one hand the human boundaries depending on the different properties of the task and on the other hand suitable ergonomical solution proposals which improve the reliability of the total system. It is a disadvantage, however, that the change of human reliability by such measures may not be quoted numerically at the moment. (orig.)

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk.

Science.gov (United States)

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Among 123 jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented.

Ergonomics Risk Assessment among support staff in Universiti Malaysia Pahang

Science.gov (United States)

Jusoh, Faisal; Nafis Osman Zahid, Muhammed

2018-03-01

Awareness of ergonomic risk assessment among workers are getting intense in many industries nowadays. It is essential since most of the workers spend 7 to 8 hours of their time in the workplaces. Previous study shown that spending too much time with static posture in sitting at workplace leads to the problem of Musculoskeletal Disorders (MSDs). The implications are not only harmful to human body but also effect the productivity. Currently, there are no scientific study conducted to assess the conditions of workers in Universiti Malaysia Pahang (UMP). Therefore, the problem of MSDs could not be justified clearly and the top management did not acknowledge this issue. This study aims to present current scenario of ergonomic risk level at UMP by using structured model. It focuses on operational staff from faculties and Human Resources Department (HRD). Initially, three types of assessments are executed based on general working condition, Cornell Muscokeletal Discomfort Questionnaire (CMDQ) and Rapid Office Strain Assessment (ROSA). Based on the findings, 90% of the respondents felt discomfort at workplace but prefer to rectify the issues by themselves. Almost 50% of them evaluated themselves in level 4-5 of discomfort level. The CMDQ result shown the discomfort area at faculties and HRD. The workplace at faculties and HRD had been assessed through ROSA and the overall result shown the risk level is medium level respectively. Therefore, further investigation is requires and improvement of workplace need to be proposed to establish good working condition.

ERGONOMICS AND ROAD SAFETY

NARCIS (Netherlands)

BROOKHUIS, K; BROWN, [No Value

1992-01-01

Modifications to the design of vehicles and road infrastructures have improved road safety significantly over the past decades, but all such developments depend upon user acceptance and institutional backing for their success. New R&D programmes combining ergonomic and engineering approaches are

'1966 and all that': Trends and developments in UK ergonomics during the 1960s.

Science.gov (United States)

Waterson, Patrick; Eason, Ken

2009-11-01

The 1960s represents a key decade in the expansion of ergonomics within the UK. This paper reviews trends and developments that emerged out of the 1960s and compares these with ergonomics research and practice today. The focus in particular is on the expansion of ergonomics as a discipline within industry, as well as more specific topics, such as the emergence of areas of interest, for example, computers and technology, automation and systems ergonomics and consumer ergonomics. The account is illustrated with a detailed timeline of developments, a set of industrial case studies and the contents of important publications during the decade. A key aim of the paper is to provide the opportunity to reflect on the past and the implications this may have for future directions for ergonomics within the UK. The paper provides practitioners with an insight into the development of ergonomics in the UK during one of the most important decades of its history. This is especially relevant given the fact that in 2009 the Ergonomics Society celebrates its 60th anniversary.

Application of a mathematical model for ergonomics in lean manufacturing.

Science.gov (United States)

Botti, Lucia; Mora, Cristina; Regattieri, Alberto

2017-10-01

The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

Integrating ergonomics into production system development--the Volvo Powertrain case.

Science.gov (United States)

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

Development of an ergonomics guideline for the furniture manufacturing industry.

Science.gov (United States)

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

Multilevel Comprehensive Evaluation and Decision Making of Ergonomics

Directory of Open Access Journals (Sweden)

Wen-jun Wang

2015-01-01

Full Text Available Due to the improvement of living standards, higher level of ergonomic performance is required for the products. As a result, the ergonomic evaluation has become one of the key points in the decisions making of modern products, especially the complex products. Aiming at improving the situation that the methods for ergonomic evaluation and decision making are one-sided and discrete, this paper proposed several methods for measuring multiply factors and data format of products and built a comprehensive evaluation and decision making system. In this system, the data supplied by soft hardware and specialists were calculated separately to gain the preliminary scores, and the preliminary scores were processed to get the final results for the decision making using the AHP-GRA analytic hierarchy process-gray relational analysis method proposed in this paper.

Building a framework for ergonomic research on laparoscopic instrument handles.

Science.gov (United States)

Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

2016-06-01

Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Participatory ergonomics and new work: reducing neck complaints in assembling

NARCIS (Netherlands)

Migueza, S.A.; Hallbeck, M.S.; Vink, P.

2012-01-01

A participatory ergonomics approach is used to create a new work environment, which is aimed at reducing neck complaints in a cell phone assembly. The participatory ergonomics program included an initiative, problem identification, a selection of solutions, an implementation and evaluation.

Ergonomics as a missing part of sustainability.

Science.gov (United States)

Pavlovic-Veselinovic, Sonja

2014-01-01

In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

WORK PRECARIOUSNESS: ERGONOMIC RISKS TO OPERATORS OF MACHINES ADAPTED FOR FOREST HARVESTING

Directory of Open Access Journals (Sweden)

Stanley Schettino

Full Text Available ABSTRACT This study aimed to assess different types of machines adapted for mechanized forest harvesting activities in order to quantify the degree of compliance with ergonomic principles applicable to forest machines, as well as the ergonomic risks to which workers are exposed. The following machines were evaluated: a feller buncher adapted into a wheel loader; a mini skidder coupled to an agricultural tractor; and a forest loader adapted to an agricultural tractor; operating in the states of Paraná and Minas Gerais. Biomechanical working conditions were assessed by applying a checklist for simplified assessment of the workplace biomechanical conditions. The forced postures assessment was performed using the REBA - "Rapid Entire Body Assessment" method. In turn, ergonomic classification was through guidelines contained in the ergonomic classification manual "Ergonomic Guidelines for Forest Machines". Moreover, the environmental factors noise, temperature and vibration to which the operators of these machines were exposed were assessed. The results showed all assessed machines had ergonomic standards below those indicated in all assessed aspects, mainly related to access and dimensions of the workplace, need to adopt forced postures during working hours, and exposure to environmental factors assessed above tolerance limits. It is concluded that machines adapted for use in forest harvesting processes have shown significant gaps in relation to ergonomic aspects, presenting high and imminent risk of development of occupational diseases in their operators.

The stage of change approach for implementing ergonomics advice - Translating research into practice.

Science.gov (United States)

Rothmore, Paul; Aylward, Paul; Oakman, Jodi; Tappin, David; Gray, Jodi; Karnon, Jonathan

2017-03-01

The Stage of Change (SOC) approach has been proposed as a method to improve the implementation of ergonomics advice. However, despite evidence for its efficacy there is little evidence to suggest it has been adopted by ergonomics consultants. This paper investigates barriers and facilitators to the implementation, monitoring and effectiveness of ergonomics advice and the adoption of the SOC approach in a series of focus groups and a subsequent survey of members of the Human Factors Societies of Australia and New Zealand. A proposed SOC assessment tool developed for use by ergonomics practitioners is presented. Findings from this study suggest the limited application of a SOC based approach to work-related musculoskeletal injury prevention by ergonomics practitioners is due to the absence of a suitable tool in the ergonomists' repertoire, the need for training in this approach, and their limited access to relevant research findings. The final translation of the SOC assessment tool into professional ergonomics practice will require accessible demonstration of its real-world usability to practitioners and the training of ergonomics practitioners in its application. Copyright © 2016 Elsevier Ltd. All rights reserved.

Swedish Sonographers' perceptions of ergonomic problems at work and their suggestions for improvement.

Science.gov (United States)

Gemark Simonsen, Jenny; Gard, Gunvor

2016-09-15

Sonographers' perceptions of ergonomic and work-related pain problems at work have so far mostly been researched in quantitative studies by questionnaires. There is a need of experience-based research to deepen the knowledge about how sonographers perceive ergonomic problems at work. Therefore, the aim of this qualitative study was to describe sonographers' perceptions of ergonomic problems at work, and their suggestions for improvement strategies. Twenty-two female sonographers were individually interviewed regarding different aspects of their physical working environment. Content analysis was applied. The sonographers perceived different ergonomic problems in their working environment, but to offer patient comfort and to obtain the best possible images were often prioritized over working posture. Echocardiography was considered demanding as the examination is performed with little variation in posture. Ergonomic improvements included reducing the manual handling of the transducer, optimizing the adjustability of equipment, and taking the patient's physique and health into account. As some examinations were perceived to be more ergonomically demanding, variation between examinations was suggested, however, this requires broader skills. Sonography, especially echocardiography is ergonomically demanding but the improvement strategies suggested were perceived useful and applicable.

Meeting diversity in ergonomics

NARCIS (Netherlands)

Looze, M.P. de; Pikaar, R.

2006-01-01

The plenary lectures from the 16th World Congress on Ergonomics, Maastricht, July 10-14, 2006, have been documented in this special issue. Its theme was ‘Meeting Diversity'. The contributions, ranging from scientific papers to technical notes or short statements, cover different aspects of the

Improvements in musculoskeletal health and computing behaviors: Effects of a macroergonomics office workplace and training intervention.

Science.gov (United States)

Robertson, Michelle M; Huang, Yueng Hsiang; Lee, Jin

2017-07-01

Computer use and its association with musculoskeletal and visual symptoms is an escalating concern. Organizations are shifting to a more proactive injury prevention perspective. Accordingly, a macroergonomics intervention consisting of flexible workplace design and office ergonomics training was designed to examine the effects on worker's computing behaviors, postures, and musculoskeletal discomfort, and their relationship to psychosocial factors. Participants were assigned to either group: 1) no-intervention control 2) flexible Workplace-only (WP-only), and 3) flexible Workplace + Training (WP+T). Observational findings indicate both intervention groups experienced positive, significant changes in improved workstation arrangements and computing postures, with the WP+T intervention group exhibiting a higher, significant change of behavioral translation. Also, significant, positive relationships between observed postures and musculoskeletal discomfort/pain were found. The intervention effect was stronger when management was responsive to workers' ergonomics needs. This study suggests that a macroergonomics intervention can produce beneficial effects for office and computer workers and organizations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

Science.gov (United States)

Woo, E H C; White, P; Lai, C W K

2016-03-01

This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

Ergonomics issues in national identity card for homeland security.

Science.gov (United States)

Yeow, Paul H P; Yuen, Y Y; Loo, W H

2013-09-01

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens' Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics Contribution in Maintainability

Science.gov (United States)

Teymourian, Kiumars; Seneviratne, Dammika; Galar, Diego

2017-09-01

The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

Ergonomic design in the operating room: information technologies

Science.gov (United States)

Morita, Mark M.; Ratib, Osman

2005-04-01

The ergonomic design in the Surgical OR of information technology systems has been and continues to be a large problem. Numerous disparate information systems with unique hardware and display configurations create an environment similar to the chaotic environments of air traffic control. Patient information systems tend to show all available statistics making it difficult to isolate the key, relevant vitals for the patient. Interactions in this sterile environment are still being done with the traditional keyboard and mouse designed for cubicle office workflows. This presentation will address the shortcomings of the current design paradigm in the Surgical OR that relate to Information Technology systems. It will offer a perspective that addresses the ergonomic deficiencies and predicts how future technological innovations will integrate into this vision. Part of this vision includes a Surgical OR PACS prototype, developed by GE Healthcare Technologies, that addresses ergonomic challenges of PACS in the OR that include lack of portability, sterile field integrity, and UI targeted for diagnostic radiologists. GWindows (gesture control) developed by Microsoft Research and Voice command will allow for the surgeons to navigate and review diagnostic imagery without using the conventional keyboard and mouse that disrupt the integrity of the sterile field. This prototype also demonstrates how a wireless, battery powered, self contained mobile PACS workstation can be optimally positioned for a surgeon to reference images during an intervention as opposed to the current pre-operative review. Lessons learned from the creation of the Surgical OR PACS Prototype have demonstrated that PACS alone is not the end all solution in the OR. Integration of other disparate information systems and presentation of this information in simple, easy to navigate information packets will enable smoother interactions for the surgeons and other healthcare professionals in the OR. More intuitive

Prevalence of Musculoskeletal Symptoms among teachers and their ergonomic conditions

Directory of Open Access Journals (Sweden)

Jerônimo Costa Branco

2012-03-01

Full Text Available Objective: To verify the prevalence of musculoskeletal symptoms and evaluate ergonomic conditions among teachers. Methods: A quantitative, observational and cross-sectional study held in the city of Pelotas-RS, Brazil, in the period of November to December 2009. The sample was composed by 320 teachers in 6 schools. Research was accomplished by means of a socialdemographic questionnaire, a check-list for ergonomic evaluation, and the Nordic questionnaire, applied in order to evaluate the ostheomuscular symptoms. Results:287 (89,7% teachers referred some symptom in the last 12 months. The most affected areas were: shoulders 177 (61,6%, thoracic column 173 (60,2% and cervical spine 163 (56,7%. Ergonomic condition of the workplace was considered unsatisfactory by the teachers. Conclusion: Ostheomuscular symptoms were found in high prevalence among teachersin Pelotas, whose ergonomic conditions are considered inappropriate, standing out the vertebral column as the most affected body part.

Ergonomic evaluation model of operational room based on team performance

Directory of Open Access Journals (Sweden)

YANG Zhiyi

2017-05-01

Full Text Available A theoretical calculation model based on the ergonomic evaluation of team performance was proposed in order to carry out the ergonomic evaluation of the layout design schemes of the action station in a multitasking operational room. This model was constructed in order to calculate and compare the theoretical value of team performance in multiple layout schemes by considering such substantial influential factors as frequency of communication, distance, angle, importance, human cognitive characteristics and so on. An experiment was finally conducted to verify the proposed model under the criteria of completion time and accuracy rating. As illustrated by the experiment results,the proposed approach is conductive to the prediction and ergonomic evaluation of the layout design schemes of the action station during early design stages,and provides a new theoretical method for the ergonomic evaluation,selection and optimization design of layout design schemes.

Facilitators & Barriers to the Adoption of Ergonomic Solutions in Construction

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Barnidge, Ellen; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Rates of musculoskeletal disorders in construction remain high. Few studies have described barriers and facilitators to the use of available ergonomic solutions. This paper describes these barriers and facilitators and their relationship to the level of adoption. Methods Three analysts rated 16 proposed ergonomic solutions from a participatory ergonomics study and assessed the level of adoption, six adoption characteristics, and identified the category of adoption from a theoretical model. Results Twelve solutions were always or intermittently used and were rated positively for characteristics of relative advantage, compatibility with existing work processes, and trialability. Locus of control (worker vs. contractor) was not related to adoption. Simple solutions faced fewer barriers to adoption than those rated as complex. Conclusions Specific adoption characteristics can help predict the use of new ergonomic solutions in construction. Adoption of complex solutions must involve multiple stakeholders, more time, and shifts in culture or work systems. PMID:28195660

Health Care Ergonomics: Contributions of Thomas Waters.

Science.gov (United States)

Poole Wilson, Tiffany; Davis, Kermit G

2016-08-01

The aim of this study was to assess the contributions of Thomas Waters's work in the field of health care ergonomics and beyond. Waters's research of safe patient handling with a focus on reducing musculoskeletal disorders (MSDs) in health care workers contributed to current studies and prevention strategies. He worked with several groups to share his research and assist in developing safe patient handling guidelines and curriculum for nursing students and health care workers. The citations of articles that were published by Waters in health care ergonomics were evaluated for quality and themes of conclusions. Quality was assessed using the Mixed Methods Appraisal Tool and centrality to original research rating. Themes were documented by the type of population the citing articles were investigating. In total, 266 articles that referenced the top seven cited articles were evaluated. More than 95% of them were rated either medium or high quality. The important themes of these citing articles were as follows: (a) Safe patient handling is effective in reducing MSDs in health care workers. (b) Shift work has negative impact on nurses. (c) There is no safe way to manually lift a patient. (d) Nurse curriculums should contain safe patient handling. The research of Waters has contributed significantly to the health care ergonomics and beyond. His work, in combination with other pioneers in the field, has generated multiple initiatives, such as a standard safe patient-handling curriculum and safe patient-handling programs. © 2016, Human Factors and Ergonomics Society.

Ergonomics and regulatory politics: the Washington State case.

Science.gov (United States)

Silverstein, Michael

2007-05-01

Every year in the State of Washington more than 50,000 workers experience a work related musculoskeletal disorder (WMSD), making up more than 30% of all worker compensation cases. In 2000, the Washington State Department of Labor and Industries (L&I) adopted a workplace ergonomics rule requiring employers to reduce worker exposure to hazards that cause or contribute to WMSDs. In 2003, the ergonomics rule was repealed by a margin of 53.5-46.5 in a statewide voter initiative. The official rulemaking record of approximately 100,000 pages, along with supplementary published and unpublished material, was reviewed. The relationship between scientific deliberation and the public policy process in adopting and repealing the ergonomics rule was assessed and described. The deliberative features of the regulatory, judicial, legislative, and ballot processes were compared. The ergonomics rule was successful in the regulatory and legal arenas where the process was most transparent and open to public involvement, differing views could be presented fully, and decision makers were expected to explain their decisions in light of the record. The rule fared most poorly in the legislature and at the ballot box when these features were lost and where considered deliberation was replaced by unconstrained political conflict. Additional checks and balances are needed.

Ergonomic applications to dental practice

Directory of Open Access Journals (Sweden)

Shipra Gupta

2011-01-01

Full Text Available The term "work-related musculoskeletal disorders (WMSDs," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.

An effective model for ergonomic optimization applied to a new automotive assembly line

Energy Technology Data Exchange (ETDEWEB)

Duraccio, Vincenzo [University Niccolò Cusano, Rome Via Don Gnocchi,00166, Roma Italy (Italy); Elia, Valerio [Dept. of Innovation Engineering - University of Salento Via Monteroni, 73100, Lecce (Italy); Forcina, Antonio [University Parthenope, Dep. of Engineering Centro Direzionale - Isola C4 80143 - Naples - Italy (Italy)

2016-06-08

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

An effective model for ergonomic optimization applied to a new automotive assembly line

International Nuclear Information System (INIS)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-01-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

An effective model for ergonomic optimization applied to a new automotive assembly line

Science.gov (United States)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

Science.gov (United States)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

Editorial | Scott | Ergonomics SA

African Journals Online (AJOL)

Ergonomics SA. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 23, No 1 (2011) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT ...

The impact of ergonomics

NARCIS (Netherlands)

Koningsveld, E.A.P.

2009-01-01

Ergonomists offer services to organizations. The goal of their work is to provide safety and health at work in combination with a sound human performance. However, the impact of ergonomics efforts is not always as good as ergonomists and human factors specialists want. This chapter aims to support

Ergonomics as a tool to improve the sustainability of the workforce.

Science.gov (United States)

Meyer, Felipe; Eweje, Gabriel; Tappin, David

2017-01-01

The sustainability of the workforce is threatened due to working conditions. One of the reasons for this is an imbalance between the working conditions and the capacity of the workers. The objective of the paper, based on a literature review, is to explore the relationship between two main concepts, beginning with sustainability, and finished with ergonomics. Based on that relationship, determine if ergonomics could be helpful to improve the sustainability of the workforce. Literature review was based on two keywords: sustainability and ergonomics. The focus was on create a theoretical path between these two concepts. The literature review draws on 100 journal articles, books, conference proceedings, thesis and reports. The results of the literature review highlights that an ergonomics approach is helpful and appropriate to determine the mismatch between people capacity and system demand. In that sense, the literature review reveals that both disciplines, ergonomics and sustainability, share the same principles and that the mix of both has significant potential. However, the literature also shows a lack of empirical information that proves that potential. The review first posits that sustainability principles could be helpful to improve the working conditions, and second, that an ergonomics approach provides information related with working conditions, organizations' problems and the needs of workers that would be helpful to create a sustainability workforce.

Evaluation of an ergonomics intervention among Nicaraguan coffee harvesting workers.

Science.gov (United States)

Bao, Stephen; Silverstein, Barbara; Stewart, Kate

2013-01-01

This study evaluated an ergonomics intervention among Nicaraguan coffee harvesting workers, using electromyography and questionnaire survey techniques. Nicaraguan researchers were involved in the study so that they could gain hands-on experience with ergonomics research and applications, and eventually be the specialists conducting ergonomics interventions in Nicaraguan workplaces. Coffee harvesting activities were studied individually and physical hazards were identified accordingly. The results showed decreased muscle loading on the erector spinae muscle and improved comfort reporting in the back region compared to the commonly used baskets. This fulfils the design objective of a newly developed bag that was used in the intervention to reduce physical workload on the coffee harvesting workers. Workers' opinion survey results showed some issues related to the size of the new bag and the lumbar-shoulder belt mechanism. This information can be used in the modification of the bag in the next design. Key players in the process have been identified. Stimulating ergonomics activities in developing countries is suggested by many experts. This study provided an example from coffee workers in Nicaragua. Commonly used job evaluation procedures and physical load quantification methods were used. Ergonomics researchers and practitioners in developing countries may do similar projects on their own in the future.

Ergonomics in Healthcare system-Human Factors models: a review article

Directory of Open Access Journals (Sweden)

S. Tarzimoghadam

2015-12-01

  Conclusion: Most of the published studies emphasize on application of ergonomic models in healthcare centers since these models may reduce their problems. These ergonomics approaches support patient-centered treatment processes, user-oriented design of medical environments, efficient utilization of resources and increase motivation of clinical staff.

The Physical Demands and Ergonomics of Working with Young Children.

Science.gov (United States)

Gratz, Rene R.; Claffey, Anne; King, Phyllis; Scheuer, Gina

2002-01-01

Examines the physical demands and ergonomic concerns within child care settings. Discusses problem areas and ergonomic recommendations for room design and staff training. Presents important implications for writing job descriptions, determining essential job functions, orienting and training staff, and committing to improving the child care work…

The development and validation of an ergonomics index for assessing tractor operator work place

OpenAIRE

Barbieri, Juan Paulo; Schlosser, José Fernando; Farias, Marcelo Silveira de; Negri, Giácomo Müller; Oliveira, Luis Fernando Vargas de

2018-01-01

ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996), which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015) and ABNT ...

ERGONOMICS ABSTRACTS 48983-49619.

Science.gov (United States)

Ministry of Technology, London (England). Warren Spring Lab.

THE LITERATURE OF ERGONOMICS, OR BIOTECHNOLOGY, IS CLASSIFIED INTO 15 AREAS--METHODS, SYSTEMS OF MEN AND MACHINES, VISUAL AND AUDITORY AND OTHER INPUTS AND PROCESSES, INPUT CHANNELS, BODY MEASUREMENTS, DESIGN OF CONTROLS AND INTEGRATION WITH DISPLAYS, LAYOUT OF PANELS AND CONSOLES, DESIGN OF WORK SPACE, CLOTHING AND PERSONAL EQUIPMENT, SPECIAL…

Practical use of ergonomics in industrial processes

International Nuclear Information System (INIS)

1976-01-01

Six lectures deal with new developments in the application of ergonomic knowledge, in particular to nuclear technology. All contributions have in common the aspects of analysis and structure of man-machine-systems in which human operators have to process information and have to make decisions. Quoting a lot of examples from a variety of industrial sectors, the article discusses complexes of problems and ways of solving them concerning questions requiring the answer 'yes' or 'no', concerning the dialogue man-computer, the organization of central control mechanisms, the avoidance of human errors, influence of man on system safety, and the rational incorporation of ergonomics in system planning. This publication is meant to be a contribution to extend the knowledge on the organization of work from an ergonomic and engineer/psychological point of view. It is to show how the knowledge of the nature of man can be applied as a systems component in order to make industrial processes safer and more economical, and to entrust man with purposeful and satisfying tasks. (orig./LN) [de

Designing an Ergonomically Correct CNC Workstation on a Shoe String Budget.

Science.gov (United States)

Lightner, Stan

2001-01-01

Describes research to design and construct ergonomically correct work stations for Computer Numerical Control machine tools. By designing ergonomically correct work stations, industrial technology teachers help protect students from repetitive motion injuries. (Contains 12 references.) (JOW)

Implementing ergonomics in large-scale engineering design. Communicating and negotiating requirements in an organizational context

Energy Technology Data Exchange (ETDEWEB)

Wulff, Ingrid Anette

1997-12-31

This thesis investigates under what conditions ergonomic criteria are being adhered to in engineering design. Specifically, the thesis discusses (1) the ergonomic criteria implementation process, (2) designer recognition of ergonomic requirements and the organization of ergonomics, (3) issues important for the implementation of ergonomic requirements, (4) how different means for experience transfer in design and operation are evaluated by the designers, (5) how designers ensure usability of offshore work places, and (6) how project members experience and cope with the large amount of documentation in large-scale engineering. 84 refs., 11 figs., 18 tabs.

Ergonomics influence on control room layout

International Nuclear Information System (INIS)

Hartfiel, H.D.

1984-01-01

Nowadays, human factors has become an important aspect of the design of work places. Since the control room in a nuclear power plant is a work place, too, its layout is also influenced by ergonomics. With the KWU control room concept for the 1300 MW PWR as an example, we show how assured and applicable ergonomic findings enter into the control room design. On the basis of general design principles for work places, specific methods for control room planning have been developed. By working with these methods a concept that makes it possible to build a man-machine interface able to fulfill the process control tasks with all their underlying conditions has been derived. (author)

Integrating ergonomics into engineering: Empirical evidence and implications for the ergononomist

DEFF Research Database (Denmark)

Broberg, Ole

2007-01-01

management nor safety organizations expressed any expectations in this area. The study further indicated that effects of ergonomics training in engineering schools were very lim-ited. The engineering cultures in enterprises, together with other organizational factors, are suggested to be of greater......Engineering design is a strong determinant of workplace ergonomics. A survey among 680 engineers in twenty Danish enterprises indicated that engineers are not aware that they influence the work environment of other people. Ergonomics had a low rating among engineers, perhaps because neither...

Comparison of work-related musculoskeletal symptoms between male cameramen and male office workers.

Science.gov (United States)

Jeong, Han-Seur; Suh, Byung-Seong; Kim, Soo-Geun; Kim, Won-Sool; Lee, Won-Cheol; Son, Kyung-Hun; Nam, Min-Woo

2018-01-01

Previous studies have classified cameramen's job as physiologically heavy work and identified the risk factors of work-related musculoskeletal disorders (WRMDs) in cameramen. However, those studies limited their research subjects to cameramen. In this study, we compared the frequency and severity of WRMDs between cameramen and office workers. A total of 293 subjects working in four broadcasting companies in Korea were recruited. A questionnaire survey was conducted for a month, starting in October 2016. The subjects were divided into cameramen and office workers according to their occupation. We compared the frequency and severity of WRMDs and ergonomic risk assessment results between the two groups. The high-risk WRMD group had a higher proportion of cameramen than office workers. Moreover, the high ergonomic risk group also had a higher proportion of cameramen than office workers for WRMDs in the upper extremities and waist+lower extremities. In the multivariable-adjusted model comparing cameramen and office workers, the odds ratio (OR) with 95% confidence interval (95% CI) for high-risk WRMDs was 3.50 (95% CI: 1.92-7.72) for the upper extremities and 3.18 (95% CI: 1.62-6.21) for the waist and the lower extremities. The ORs by body parts were 3.11 (95% CI: 1.28-7.57) for the neck, 3.90 (95% CI: 1.79-8.47) for the shoulders, and 4.23 (95% CI: 1.04-17.18) for the legs and feet. Our study suggests that cameramen are at high risk of WRMDs. Workplace improvements and management of the neck, shoulders, and lower extremities, which are susceptible to WRMDs, are necessary to prevent musculoskeletal disorders among cameramen.

Ergonomics in dentistry: experiences of the practice by dental students.

Science.gov (United States)

Garcia, P P N S; Gottardello, A C A; Wajngarten, D; Presoto, C D; Campos, J A D B

2017-08-01

The aim of this study was to qualitatively evaluate the experiences of students enrolled in the last year of dentistry school with ergonomic practice. This is a qualitative, observational and cross-sectional study, with a non-probabilistic sample design. The sample comprised students enrolled in the last year of dentistry in Araraquara-UNESP (n = 29). The data were collected by means of open semi-structured and individual interviews, captured by a digital voice recorder. The students were interviewed in their own university at a time that was previously scheduled, and care was taken to provide a private and welcoming environment to carry out the interviews. A script containing questions related to practices in ergonomics was prepared at the university. Data analysis was carried out using the qualitative-quantitative Collective Subject Discourse technique with the aid of Qualiquantisoft ® software program. It was found that more than half of the students (58.6%) believe that adopting an ergonomic posture is important to prevent future problems, pain and occupational diseases, and 62.1% of the students confirm having difficulties in adopting ergonomic postures due to the types of treatment required and the regions of the mouth being treated. The main reasons stated for the fact that their colleagues do not adopt ergonomic postures are lack of attention, practice and forgetfulness (44.8%) and difficulty in visualising the operatory field or the procedure performed (27.6%). It is possible to conclude that the students interviewed know ergonomic principles and their importance in occupational health. However, they found it difficult to put these principles into practice. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

ERGONOMIC AND ECOLOGICALSAFETY - FACTORSNESSARY TO IMPROVETHE COMPETITIVENESS OF THE DOMESTIC CONSTRUCTION MACHINERY

Directory of Open Access Journals (Sweden)

Volkov Andrey Anatol’evich

2017-03-01

Full Text Available The analysis of output and domestic used construction machinery showed that the most vulnerable link remains a problem of underreporting of ergonomics and environmental safety requirements. Compliance with ergonomic requirements enhances the performance of mechanized operations, leading to a decrease in construction costs. Increased environmental requirements reduce the negative impact on air basin. These results suggest the need to improve the structures of building machines. Made recommendations for a comprehensive solution to the problem. The measures to improve environmental safety, ergonomic design requirements of construction machinery, mechanisms of the optimal development of the domestic construction machinery, through the development and implementation of appropriate measures. Keywords: ergonomics of construction equipment, environmental safety of construction equipment

The discipline of ergonomics in Cuba within the occupational health framework: background and trends.

Science.gov (United States)

Torres, Yaniel; Rodríguez, Yordán; Viña, Silvio

2013-01-01

The concept of ergonomics was introduced in Cuba at the beginning of the 1970s. More than 40 years later, the prevailing approach to workers' health is still generally reactive rather than proactive, despite the commitment of the government to the subject. A factor influencing this issue is, generally, lack of recognition of the benefits of establishing ergonomic principles within most occupational activities. Recent progress to move occupational health practice toward a more preventive approach has been conducted, frequently with international support. The introduction of a set of Cuban standards proposing the necessity of ergonomic evaluations is an example of this progress. The main challenge for Cuban ergonomists is to transfer knowledge to occupational health practitioners in order to be in concordance with basic standards and regulations regarding ergonomics. The article offers a short description of the history of ergonomics and an overview of ergonomics practice in Cuba.

Ergonomic workplace assessment in orthotic and prosthetic workshops.

Science.gov (United States)

Salmani Nodooshan, H; Koohi Booshehri, S; Daneshmandi, H; Choobineh, A R

2016-10-17

In Iranian orthotic and prosthetic workshops, the majority of activities are carried out by manpower and the tasks are labor-intensive. In these workshops, ergonomic aspects of working conditions are seldom considered. This study was conducted in orthotic and prosthetic workshops with the objectives of determination of prevalence rate of MSDs among employees and assessment of ergonomics working conditions. In this cross-sectional study, all employees (n = 42; 29 males and 13 females) in 11 active orthotic and prosthetic production centers of Shiraz city participated. Data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and observational technique by an ergonomics checklist for assessment of working conditions. The means (SD) of age and job tenure (years) in the study individuals were 37.26 (10.21) and 12.8 (9.39), respectively. The most prevalent MSD symptoms in the past 12 months were reported in the lower back (42.9%), shoulders (40.5%) and knees (40.5%). Working conditions assessment showed that the main ergonomic problems in the workshops studied originated from awkward working posture, improper workstation design, poorly designed hand tools and incorrect manual material handling. Any interventional program for working conditions improvement should, therefore, focus on these areas.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-07-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-01-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

Computational investigation of two interventions for neck and upper extremity pain in office workers

DEFF Research Database (Denmark)

Rasmussen, J.; De Zee, M.

2010-01-01

reduce the muscle loads, but a wrist cushion is the more effective intervention type for the vast majority of the muscles. It is concluded that the method can offer useful assistance for design and prescription of efficient interventions for particular ergonomic problems typical for office workers.......This paper reports on novel results derived from a computer model of a typical office work place. We demonstrate how the detailed albeit very small muscle loads can be analyzed and how the effect of two interventions can be assessed using the model. The investigations reveal that both interventions...

Connections between voice ergonomic risk factors and voice symptoms, voice handicap, and respiratory tract diseases.

Science.gov (United States)

Rantala, Leena M; Hakala, Suvi J; Holmqvist, Sofia; Sala, Eeva

2012-11-01

The aim of the study was to investigate the connections between voice ergonomic risk factors found in classrooms and voice-related problems in teachers. Voice ergonomic assessment was performed in 39 classrooms in 14 elementary schools by means of a Voice Ergonomic Assessment in Work Environment--Handbook and Checklist. The voice ergonomic risk factors assessed included working culture, noise, indoor air quality, working posture, stress, and access to a sound amplifier. Teachers from the above-mentioned classrooms reported their voice symptoms, respiratory tract diseases, and completed a Voice Handicap Index (VHI). The more voice ergonomic risk factors found in the classroom the higher were the teachers' total scores on voice symptoms and VHI. Stress was the factor that correlated most strongly with voice symptoms. Poor indoor air quality increased the occurrence of laryngitis. Voice ergonomics were poor in the classrooms studied and voice ergonomic risk factors affected the voice. It is important to convey information on voice ergonomics to education administrators and those responsible for school planning and taking care of school buildings. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Ergonomics study for workers at food production industry

Directory of Open Access Journals (Sweden)

Mohd Fazi Hamizatun

2017-01-01

Full Text Available The health constraint faced by production workers affects the quality of the work. The productivity of the workers is affected by the Work-related Musculoskeletal Disorder (WMSD which limits the movement of the workers. The comfort workplace condition, known as ergonomic environment is important to prevent the occurrence of the WMSD. Proper ergonomic workplace considers the condition of the workers while doing the assigned work. The objectives of this study are to identify the current problems related to ergonomic in food production process, to analyse the actual production data by using Rapid Upper Limb Assessment (RULA and Rapid Entire Body Assessment (REBA and to recommend the ergonomic workplace environment based on the condition of the study. The study was done at a Small and Medium Enterprises (SME food production company in the Klang Valley of Malaysia. The condition of the workers affects the productivity of the company due to workers’ health deficiency. From the findings, the workers are exposed to the awkward postures which leads to the Work-Musculoskeletal Disorders (WMSDs. Besides, the best height of the worker at the study area (critical area to prevent the worker from WMSDs is within 155 cm to 160 cm. The results show that the workers are exposed to the WMSD in different level of risks which causes high absenteeism among the workers.

Ergonomics in a national research and development programme for food technology

DEFF Research Database (Denmark)

Broberg, Ole; Hansen, Iben Posniak

1997-01-01

The research question for the study presented in this paper was: What are the opportunities and barriers for integrating ergonomics aspects into joint projects sponsored by the FOETEK programme? The objectives were (i) to evaluate the outcome of this clause of accounting for ergonomics impacts......, and (ii) to put forward recommendations for improving the integration of ergonomics into joint projects sponsored by the FOETEK programme. A survey based on a questionnaire was conducted among 57 joint projects. A total of 217 project managers or contact persons received the questionnaire. The response...

Mass of materials: the impact of designers on construction ergonomics.

Science.gov (United States)

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

Initial experience using a robotic-driven laparoscopic needle holder with ergonomic handle: assessment of surgeons' task performance and ergonomics.

Science.gov (United States)

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M

2017-12-01

The objective of this study is to assess the surgeons' performance and ergonomics during the use of a robotic-driven needle holder in laparoscopic suturing tasks. Six right-handed laparoscopic surgeons with different levels of experience took part in this study. Participants performed a set of three different intracorporeal suturing tasks organized in ten trials during a period of five weeks. Surgeons used both conventional (Conv) and robotic (Rob) laparoscopic needle holders. Precision using the surgical needle, quality of the intracorporeal suturing performance, execution time and leakage pressure for the urethrovesical anastomosis, as well as the ergonomics of the surgeon's hand posture, were analyzed during the first, fifth and last trials. No statistically significant differences in precision and quality of suturing performance were obtained between both groups of instruments. Surgeons required more time using the robotic instrument than using the conventional needle holder to perform the urethrovesical anastomosis, but execution time was significantly reduced after training ([Formula: see text] 0.05). There were no differences in leakage pressure for the anastomoses carried out by both instruments. After training, novice surgeons significantly improved the ergonomics of the wrist ([Formula: see text] 0.05) and index finger (Conv: 36.381[Formula: see text], Rob: 30.389[Formula: see text]; p = 0.024) when using the robotic instrument compared to the conventional needle holder. Results have shown that, although both instruments offer similar technical performance, the robotic-driven instrument results in better ergonomics for the surgeon's hand posture compared to the use of a conventional laparoscopic needle holder in intracorporeal suturing.

Surgeons' physical discomfort and symptoms during robotic surgery: a comprehensive ergonomic survey study.

Science.gov (United States)

Lee, G I; Lee, M R; Green, I; Allaf, M; Marohn, M R

2017-04-01

It is commonly believed that robotic surgery systems provide surgeons with an ergonomically sound work environment; however, the actual experience of surgeons practicing robotic surgery (RS) has not been thoroughly researched. In this ergonomics survey study, we investigated surgeons' physical symptom reports and their association with factors including demographics, specialties, and robotic systems. Four hundred and thirty-two surgeons regularly practicing RS completed this comprehensive survey comprising 20 questions in four categories: demographics, systems, ergonomics, and physical symptoms. Chi-square and multinomial logistic regression analyses were used for statistical analysis. Two hundred and thirty-six surgeons (56.1 %) reported physical symptoms or discomfort. Among those symptoms, neck stiffness, finger, and eye fatigues were the most common. With the newest robot, eye symptom rate was considerably reduced, while neck and finger symptoms did not improve significantly. A high rate of lower back stiffness was correlated with higher annual robotic case volume, and eye symptoms were more common with longer years practicing robotic surgery (p ergonomic settings reported lower symptom report rates. Symptoms were not correlated with age and gender. Although RS provides relatively better ergonomics, this study demonstrates that 56.1 % of regularly practicing robotic surgeons still experience related physical symptoms or discomfort. In addition to system improvement, surgeon education in optimizing the ergonomic settings may be necessary to maximize the ergonomic benefits in RS.

The development and validation of an ergonomics index for assessing tractor operator work place

Directory of Open Access Journals (Sweden)

Juan Paulo Barbieri

2018-02-01

Full Text Available ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996, which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015 and ABNT NBR ISO 4252 (2011, which regulate the access to operator workplaces; and NR 12 (2010, which determines the mandatory items of operator workplaces.Thirty-four operator work places of 152 models of new agricultural tractors sold in the Brazilian market were analyzed in this study. Ergonomics index was developed and validated using these standards, and the findings enabled the ranking of agricultural tractors. Therefore, the proposed ergonomics index proved feasible and may be applied to other agricultural machines.

Ergonomic adjustments on a website from the usability of functions: Can deficits impair functionalities?

Directory of Open Access Journals (Sweden)

Dalila Giovana Pagnoncelli Laperuta

2017-09-01

Full Text Available Current study assesses whether deficits and usability of ergonomics impair the functionality of a university website. The concepts of functionality, usability and ergonomics were foregrounded by contextualizing them within a university profile. Later, a satisfaction survey was proposed to users to measure the satisfaction in the use of the website and to map the problems in usability. In addition, an ergonomic inspection was performed on the site by applying Bastien and Scapin´s ergonomic criteria. After analyzing results by descriptive statistics and content analysis, the ergonomic and usability problems were detected, or rather, feedback deficits, minimum action (navigation, flexibility and experience impaired the excellence of website´s functionality, causing dissatisfaction or abandonment of the website by the users. After the analysis of the results, ergonomic adjustments were suggested for the website. They may be a help in new website projects or adjust products in which usability has not been incorporated to the development process.

76 FR 53939 - Order of Succession for the Office of the Chief Financial Officer

Science.gov (United States)

2011-08-30

... Office of the Chief Financial Officer AGENCY: Office of the Secretary, HUD. ACTION: Notice of Order of... Chief Financial Officer. This Order of Succession supersedes all prior Orders of Succession for the Office of the Chief Financial Officer. DATES: Effective Date: August 19, 2011. FOR FURTHER INFORMATION...

Advanced Manufacturing Technologies (AMT): Additive Manufactured Hot Fire Planning and Testing in GRC Cell 32 Project

Science.gov (United States)

Fikes, John C.

2014-01-01

The objective of this project is to hot fire test an additively manufactured thrust chamber assembly TCA (injector and thrust chamber). GRC will install the additively manufactured Inconel 625 injector, two additively manufactured (SLM) water cooled Cu-Cr thrust chamber barrels and one additively manufactured (SLM) water cooled Cu-Cr thrust chamber nozzle on the test stand in Cell 32 and perform hot fire testing of the integrated TCA.

Optimal ergonomics for laparoscopic surgery in minimally invasive surgery suites: a review and guidelines.

Science.gov (United States)

van Det, M J; Meijerink, W J H J; Hoff, C; Totté, E R; Pierie, J P E N

2009-06-01

With minimally invasive surgery (MIS), a man-machine environment was brought into the operating room, which created mental and physical challenges for the operating team. The science of ergonomics analyzes these challenges and formulates guidelines for creating a work environment that is safe and comfortable for its operators while effectiveness and efficiency of the process are maintained. This review aimed to formulate the ergonomic challenges related to monitor positioning in MIS. Background and guidelines are formulated for optimal ergonomic monitor positioning within the possibilities of the modern MIS suite, using multiple monitors suspended from the ceiling. All evidence-based experimental ergonomic studies conducted in the fields of laparoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches and selected for quality and applicability. Data from ergonomic studies were evaluated in terms of effectiveness and efficiency as well as comfort and safety aspects. Recommendations for individual monitor positioning are formulated to create a personal balance between these two ergonomic aspects. Misalignment in the eye-hand-target axis because of limited freedom in monitor positioning is recognized as an important ergonomic drawback during MIS. Realignment of the eye-hand-target axis improves personal values of comfort and safety as well as procedural values of effectiveness and efficiency. Monitor position is an important ergonomic factor during MIS. In the horizontal plain, the monitor should be straight in front of each person and aligned with the forearm-instrument motor axis to avoid axial rotation of the spine. In the sagittal plain, the monitor should be positioned lower than eye level to avoid neck extension.

Connections between voice ergonomic risk factors in classrooms and teachers' voice production.

Science.gov (United States)

Rantala, Leena M; Hakala, Suvi; Holmqvist, Sofia; Sala, Eeva

2012-01-01

The aim of the study was to investigate if voice ergonomic risk factors in classrooms correlated with acoustic parameters of teachers' voice production. The voice ergonomic risk factors in the fields of working culture, working postures and indoor air quality were assessed in 40 classrooms using the Voice Ergonomic Assessment in Work Environment - Handbook and Checklist. Teachers (32 females, 8 males) from the above-mentioned classrooms recorded text readings before and after a working day. Fundamental frequency, sound pressure level (SPL) and the slope of the spectrum (alpha ratio) were analyzed. The higher the number of the risk factors in the classrooms, the higher SPL the teachers used and the more strained the males' voices (increased alpha ratio) were. The SPL was already higher before the working day in the teachers with higher risk than in those with lower risk. In the working environment with many voice ergonomic risk factors, speakers increase voice loudness and use more strained voice quality (males). A practical implication of the results is that voice ergonomic assessments are needed in schools. Copyright © 2013 S. Karger AG, Basel.

Understanding knowledge transfer in an ergonomics intervention at a poultry processing plant.

Science.gov (United States)

Antle, David M; MacKinnon, Scott N; Molgaard, John; Vézina, Nicole; Parent, Robert; Bornstein, Stephen; Leclerc, Louise

2011-01-01

This case study reviews the knowledge transfer (KT) process of implementing a knife sharpening and steeling program into a poultry processing plant via a participatory ergonomics intervention. This ergonomics intervention required stakeholder participation at the company level to move a 'train-the-trainer' program, developed in Québec, Canada, into action on the plant's deboning line. Communications and exchanges with key stakeholders, as well as changes in steeling and production behaviours were recorded. The intervention was assumed to be at least partially successful because positive changes in work operations occurred. Ergonomic-related changes such as those documented have been cited in the academic literature as beneficial to worker health. However, several components cited in literature that are associated with a successful participatory ergonomics intervention were not attained during the project. A Dynamic Knowledge Transfer Model was used to identify KT issues that impacted on the success of train-the-trainer program. A debriefing analysis reveals that a failure to consider key participatory ergonomics factors necessary for success were related to capacity deficits in the knowledge dissemination strategy.

The application of participatory ergonomics in a healthcare setting in Hong Kong.

Science.gov (United States)

Lee, Edwin W C; Fok, Joan P C; Lam, Augustine T; Law, Rainbow K Y; Szeto, Grace P Y; Li, Philip P K

2014-01-01

Work-related musculoskeletal disorders (WRMDs) are recognized as a major source of significant pain and disability in the healthcare sector. However, they are preventable if appropriate surveillance and intervention programs are implemented. The purpose of this paper is to describe the holistic ergonomic approach that was used to address the multifactorial problems encountered by healthcare workers in their daily work. Using participatory ergonomics, healthcare workers in this study teamed up with management and staff with expertise in ergonomic analysis, design, and implementation of remedies. Selected participatory ergonomic intervention programs targeted at an organizational level are elaborated. Interventions included pre-work stretching, workplace surveillance at a psychiatric department, on-site ergonomic teaching for community nurses, and display screen equipment consultancy. Changes in workplace design, equipment re-arrangement, awareness of proper posture, and adoption of good work practices all play important roles in reducing musculoskeletal disorders among healthcare workers. Prompt occupational medicine and rehabilitation services were also provided to complement the work disability prevention process. The impact of the various intervention programs on staff health, costs and productivity of the organization are simultaneously discussed.

Do we need sustainability as a new approach in human factors and ergonomics?

Science.gov (United States)

Zink, Klaus J; Fischer, Klaus

2013-01-01

The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.

1994 Ergonomics Program Quality Evaluation

Energy Technology Data Exchange (ETDEWEB)

Longbotham, L.; Miller, D.P.

1995-06-01

A telephone survey was conducted to evaluate the quality of service provided to the primary customers of the Corporate Ergonomics Group (CEG). One hundred clients who received services between October 1993 and June 1994 were asked questions on their expectations, implementation of ergonomic recommendations, follow-ups, time required, productivity improvements, symptom alleviation, and satisfaction. Suggestions on how processes could be improved were also solicited. In general, recommendations are being implemented, worksite evaluations are going smoothly, and customers are satisfied with the process. The CEG was pleased to learn that half of the people who implemented recommendations experienced improvements in productivity, and four out of five symptomatic customers experienced partial or complete relief. Through analysis of the data and by studying clients` suggestions for process improvement, the CEG has developed a strategy for changing and improving current procedures and practices. These plans can be found in the last section of this report.

Effectiveness of Ergonomic Chair against Musculoskeletal Disorders in Female Batik Workers of Sragen District

Directory of Open Access Journals (Sweden)

Sumardiyono Sumardiyono

2014-08-01

Full Text Available The majority of female batik workers uses non-ergonomic chairs (dingklik that pose risks of musculoskeletal disorders. This study aimed to design an ergonomic chair and evaluate its effectiveness in reducing musculoskeletal disorders among the workers. This is a quasi-experimental study (using one group pre and post-test design on 50 female batik workers selected by quota sampling. Musculoskeletal disorders were measured among the samples before and after the use of the designed ergonomic chair which they were asked to use for two months. T-test, ANCOVA, Wilcoxon test, McNemar test and Chi Square test were used for the analysis. The study found statistical significant differences of risk factor against musculoskeletal disorders among the workers before and after their use of the designed ergonomic chair (p=0.000; and of musculoskeletal disorders before and after using the ergonomic chair (p= 0,035. Body Mass Index (BMI was identified as a confounding factor, and statistical significant difference of musculoskeletal disorders were also found among the workers with 25 BMI even before and after using the ergonomic chair (p=0.033 and p=0.015 respectively. By ANCOVA statistical test, after controlling BMI, another statistical difference of musculoskeletal disorders was also identified before and after using the ergonomic chair (p=0.033. It is concluded that the designed ergonomic chair is effective to reduce the risk of musculoskeletal disorders.

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

Science.gov (United States)

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Assessment of ergonomics risk factors influencing incidence of musculoskeletal disorders among office workers

Directory of Open Access Journals (Sweden)

S. I. Samaei

2015-12-01

  Conclution: According to results, ROSA assessment method is an efficient tool in the classification and identification of factors affecting the incidence of MSDs among office workers. Performing corrective measures in the dangerous work stations (the second level identified by ROSA technique, reducing the duration of computer use per day, and doing regular sport activities can be noted in order to decrease the prevalence of MSDs in the study group (office workers.

Discussion after implementation of possible ergonomics contributions in production lines automation project

OpenAIRE

José Adriano Canton; Andrea Regina Martins Fontes; Isaías Torres

2016-01-01

This paper addresses the issue of work spaces designed based on Activity-Centered Ergonomics. The aim was to reflect on the role of Ergonomics in the design of productive situations in order to anticipate and mitigate the emergence of new constraints. This study was developed using a case study from the packaging industry, where an automated line was implemented to mitigate the injuries suffered as result of the manual system. This article was based on the results of an Ergonomic Work Analysi...

PROPOSAL FOR AN ERGONOMIC CONFORMITY INDEX FOR EVALUATION OF HARVESTERS AND FORWARDERS

Directory of Open Access Journals (Sweden)

Felipe Leitão da Cunha Marzano

2017-11-01

Full Text Available ABSTRACT Context: In mechanized forestry work, the ergonomic conditions of the workplace affects operator's health, performance and productivity. Originality: A comparison of different forest machines becomes complex in case where it is required analysis of several ergonomic factors simultaneously. There are several methods of ergonomic analysis however, a more complete methodology that considers several ergonomic factors and produces an index that represent the ergonomic condition of the machine is needed. Objective: Propose a methodology to determining an Ergonomic Conformity Index to evaluate Harvesters and Forwarders of different brands. Methodology: The ECI was determined initially basing in four relevant ergonomic factors: noise, vibration, thermal environment and air quality. These factors were evaluated utilizing four Harvesters and two Forwarders in eucalyptus timber harvesting operations. For each factor, a score was given according to its compliance with the established parameters. The ECI was obtained from an average of the scores given to each factor. The index ranges from zero to one, so that lower values indicate worse ergonomic conditions. Results: All the analyzed machines had continuous noise between 75.0 and 82.6 dB (A and whole-body vibration between 0.27 and 0.70 m s-2. HV1 and HV2 presented thermal environment in accordance with the established criteria, other machines showed deficiencies in this regard. All the machines presented non-conformities in the air quality, except HV2. The ECI of Harvesters HV1, HV2, HV3 and HV4, were 0.83; 0.88; 0.71; 0.63. The ECI of Forwarders FW1 and FW2 were 0.58 and 0.79. Conclusion: The determination of the ECI allowed an evaluation and comparison between analyzed forest machines. The machine with the higher ECI had only one non-conformity, and it was related to noise inside the cab. The machine that got the lower ECI presented non-conformities for all the factors.

ERGONOMICs IN THE COMPUTER WORKsTATION

African Journals Online (AJOL)

2010-09-09

Sep 9, 2010 ... in relation to their work environment and working surroundings. ... prolonged computer usage and application of ergonomics in the workstation. Design:One hundred and .... Occupational Health and Safety Services should.

Crossing levels in systems ergonomics: a framework to support 'mesoergonomic' inquiry.

Science.gov (United States)

Karsh, Ben-Tzion; Waterson, Patrick; Holden, Richard J

2014-01-01

In this paper we elaborate and articulate the need for what has been termed 'mesoergonomics'. In particular, we argue that the concept has the potential to bridge the gap between, and integrate, established work within the domains of micro- and macroergonomics. Mesoergonomics is defined as an open systems approach to human factors and ergonomics (HFE) theory and research whereby the relationship between variables in at least two different system levels or echelons is studied, and where the dependent variables are human factors and ergonomic constructs. We present a framework which can be used to structure a set of questions for future work and prompt further empirical and conceptual inquiry. The framework consists of four steps: (1) establishing the purpose of the mesoergonomic investigation; (2) selecting human factors and ergonomics variables; (3) selecting a specific type of mesoergonomic investigation; and (4) establishing relationships between system levels. In addition, we describe two case studies which illustrate the workings of the framework and the value of adopting a mesoergonomic perspective within HFE. The paper concludes with a set of issues which could form part of a future agenda for research within systems ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics action research I: shifting from hypothesis testing to experiential learning.

Science.gov (United States)

Neumann, W P; Dixon, S M; Ekman, M

2012-01-01

This paper presents the case for the need for 'Action Research' (AR) approaches to gain understanding of how ergonomics considerations can best be integrated into the design of new work systems. The AR researchers work collaboratively with other stakeholders to solve a real-world problem: gaining insight into the problem and factors influencing solution building from an embedded position in the development process. This experience is interpreted in terms of available theory and can support further theory development. This non-experimental approach can help provide practical new approaches for integrating ergonomics considerations into real work system design processes. The AR approach suffers from a lack of acceptance by conventionally trained scientists. This paper aims to help overcome this weakness by developing the underlying theory and rationale for using AR approaches in ergonomics research. We propose further development of hybrid approaches which incorporate other evaluation techniques to extend the knowledge gains from AR projects. Researchers should engage directly with organisations in ergonomics projects so that they can better understand the challenges and needs of practitioners who are trying to apply available scientific knowledge in their own unique context. Such 'Action Research' could help develop theory and approaches useful to improve mobilisation and application of ergonomics knowledge in organisations.

An ergonomic intervention to reduce musculoskeletal discomfort among semiconductor assembly workers.

Science.gov (United States)

Aghilinejad, Mashallah; Azar, Neda Soleimanvandy; Ghasemi, Mohammad Sadegh; Dehghan, Naser; Mokamelkhah, Elahe Kabir

2016-06-14

Work-related musculoskeletal disorders (MSDs) and ergonomics-related injuries are the single largest category of workplace injuries and are responsible for almost 30% of all worker's compensation costs. Awkward working posture refers to positions of the body that deviate significantly from the neutral position while job tasks are being performed and it is the primary ergonomic risk factor for developing musculoskeletal discomfort. This study was conducted among assembly workers of a semiconductor in Tehran province with the objective of implementing an interventional ergonomic program to minimize musculoskeletal discomfort. This study that was conducted on 105 male assembly workers of a semiconductor industry based on a census method. The standardized Nordic Musculoskeletal Questionnaire (NMQ) was used to determine the prevalence of MSDs. Corlett and Bishop's body part discomfort scale (BPD) was applied to evaluate body discomfort before and after the intervention (using a magnifying loupes to improve visibility of the parts). The results of NMQ showed the highest rate of MSDs were in neck, shoulder, upper arm and lower back regions (more than 75%). After ergonomic intervention, significant decrements of discomfort was observed in neck, shoulder, upper arm, elbows, lower arm, lower back and whole body discomfort (p ergonomic interventions can decrease MSDs of at risk body regions in the long term.

Ergonomics and design: traffic sign and street name sign.

Science.gov (United States)

Moroni, Janaina Luisa da Silva; Aymone, José Luís Farinatti

2012-01-01

This work proposes a design methodology using ergonomics and anthropometry concepts applied to traffic sign and street name sign projects. Initially, a literature revision on cognitive ergonomics and anthropometry is performed. Several authors and their design methodologies are analyzed and the aspects to be considered in projects of traffic and street name signs are selected and other specific aspects are proposed for the design methodology. A case study of the signs of "Street of Antiques" in Porto Alegre city is presented. To do that, interviews with the population are made to evaluate the current situation of signs. After that, a new sign proposal with virtual prototyping is done using the developed methodology. The results obtained with new interviews about the proposal show the user satisfaction and the importance of cognitive ergonomics to development of this type of urban furniture.

Identification of ergonomic issues that affect workers in oilrigs in desert environments.

Science.gov (United States)

Shikdar, Ashraf A

2004-01-01

The main objective of this research was to conduct an assessment of ergonomic-related problems in oilrigs in a desert environment. A checklist, physical audit and medical records were used in the investigation. The results showed significant health, environment and work-related problems that could be attributed to ergonomic deficiencies in the work system of the oilrig. Some major ergonomic issues identified were hard physical work, back pain, discomfort, hot environment, long shift, and diverse schedule. Ninety-four percent of the employees perceived the workday as very long, 79% were dissatisfied with the work schedule, while 61% of the employees perceived the summer work environment as extremely hot. Ergonomics should be considered in the work system design so as to reduce or eliminate problems in oilrigs in hot desert environments.

The Process of Participatory Ergonomics Simulation in Hospital Work System Design

DEFF Research Database (Denmark)

Andersen, Simone Nyholm

2016-01-01

Participatory ergonomics simulation (PES) is a method to involve workers in simulation and design of their own future work system. Understanding of the process of PES is crucial in order to plan and facilitate the process towards creating an ergonomics work system design supporting both human well...

Evaluating a digital ship design tool prototype: Designers' perceptions of novel ergonomics software.

Science.gov (United States)

Mallam, Steven C; Lundh, Monica; MacKinnon, Scott N

2017-03-01

Computer-aided solutions are essential for naval architects to manage and optimize technical complexities when developing a ship's design. Although there are an array of software solutions aimed to optimize the human element in design, practical ergonomics methodologies and technological solutions have struggled to gain widespread application in ship design processes. This paper explores how a new ergonomics technology is perceived by naval architecture students using a mixed-methods framework. Thirteen Naval Architecture and Ocean Engineering Masters students participated in the study. Overall, results found participants perceived the software and its embedded ergonomics tools to benefit their design work, increasing their empathy and ability to understand the work environment and work demands end-users face. However, participant's questioned if ergonomics could be practically and efficiently implemented under real-world project constraints. This revealed underlying social biases and a fundamental lack of understanding in engineering postgraduate students regarding applied ergonomics in naval architecture. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ergonomics, quality and continuous improvement--conceptual and empirical relationships in an industrial context.

Science.gov (United States)

Eklund, J

1997-10-01

This paper reviews the literature comparing the fields of ergonomics and quality, mainly in an industrial context, including mutual influences, similarities and differences. Relationships between ergonomics and the factors: work conditions, product design, ISO 9000, continuous improvements and TQM are reviewed in relation to the consequence, application, and process domains. The definitions of ergonomics and quality overlap substantially. Quality deficiencies, human errors and ergonomics problems often have the same cause, which in many cases can be traced to the design of work, workplace and environment e.g. noise, light, postures, loads, pace and work content. In addition, the possibility of performing to a high standard at work is an important prerequisite for satisfaction and well-being. Contradictions between the two fields have been identified in the view of concepts such as standardization, reduction of variability and copying of best practice, requiring further research. The field of quality would gain by incorporating ergonomics knowledge, especially in the areas of work design and human capability, since these factors are decisive for human performance and also therefore the performance of the systems involved. The field of ergonomics, on the other hand, would benefit from developing a stronger emphasis on methodologies and structures for improvement processes, including a clearer link with leadership and company strategies. Just as important is a further development of practicable participative ergonomics methods and tools for use at workplaces by the workers themselves, in order to integrate the top-down and the bottom-up processes and achieve better impact. Using participative processes for problem-solving and continuous improvement, focusing ergonomics and quality jointly has a great potential for improving working conditions and quality results simultaneously, and satisfying most of the interested parties.

Ergonomics technology

Science.gov (United States)

Jones, W. L.

1977-01-01

Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

Science.gov (United States)

Boschman, Julitta S.; Frings-Dresen, Monique H.W.; van der Molen, Henk F.

2015-01-01

Background The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. Methods A questionnaire was sent at baseline and 2 years later to 1,130 construction workers. We established (1) the proportion of workers reporting an increase in their use of ergonomic measures, (2) the proportion of workers reporting a decrease in MSDs, (3) the relative risk for an increase in the use of ergonomic measures and a decrease in MSDs, and (4) workers' knowledge and opinions about the use of ergonomic measures. Results At follow-up, response rate was 63% (713/1,130). The proportion of workers using ergonomic measures for vertical transport increased (34%, 144/419, p < 0.01); for measures regarding horizontal transport and the positioning of materials, no change was reported. The proportion of workers reporting shoulder complaints decreased (28%, 176/638, p = 0.02). A relationship between the use of ergonomic measures and MSDs was not found; 83% (581/704) of the workers indicated having sufficient knowledge about ergonomic measures. Lightening the physical load was reported to be the main reason for using them. Conclusion Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures. PMID:26106507

Novel ergonomic postural assessment method (NERPA) using product-process computer aided engineering for ergonomic workplace design.

Science.gov (United States)

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method's usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method.

7 CFR 225.19 - Regional office addresses.

Science.gov (United States)

2010-01-01

..., District of Columbia, Maryland, New Jersey, Pennsylvania, Puerto Rico, Virginia, Virgin Islands, and West Virginia: Mid-Atlantic Regional Office, FNS, U.S. Department of Agriculture, Mercer Corporate Park, 300...

Inculcating the ergonomic culture in developing countries: national healthy schoolbag initiative in Sri Lanka.

Science.gov (United States)

Jayaratne, Kapila

2012-12-01

The aim of this article is to describe a survey on ergonomic factors of classroom environments of school children, their influence on health, and use of research outcomes to launch a healthy schoolbag initiative. Ergonomics have not yet well penetrated relevant fields in industrially developing countries, such as Sri Lanka. One of the crucial parameters of the school environment is ergonomics. Available evidence suggests ergonomic mismatches in classroom settings. Good practice examples in child ergonomic interventions are few in resource-poor contexts. A school-based cross-sectional study was conducted in a district in Sri Lanka with a sample of 1,607 children in Grades 6 to 8 with the use of a stratified multistage cluster sampling method. Many children did experience discomfort related to substandard seating arrangements in the classroom. A significant proportion had to turn their necks to see the blackboard. For many children, seating locations were not changed. There were widespread incompatibilities of classroom furniture with anthropometric dimensions of children. A majority of children perceived discomfort contributed by mismatched classroom furniture. Carriage of school materials was not healthy. Deficiencies were noted in weight, model, ergonomic features, and carrying behavior of bags. Children experienced several negative effects, in part attributable to mismatched ergonomic factors. The schoolbag was considered a priority issue. Findings were disseminated to stakeholders and to media. Solutions were contemplated on bag weight reduction, healthy schoolbag introduction, and behavior change in a collaborative initiative with the Education Ministry. Political, administrative, and business stakeholders were successfully engaged to inculcate an ergonomic culture in an industrially developing country.

Ergonomics SA: Site Map

African Journals Online (AJOL)

Journal Home · Journals · Ergonomics SA · About · Log In · Register · Advanced Search · By Author · By Title. Issues. Current Issue · Archives · Open Journal Systems · Help. ISSN: 1010-2728. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Combining economic and social goals in the design of production systems by using ergonomics standards

NARCIS (Netherlands)

J. Dul (Jan); H.J. de Vries (Henk); S. Verschoof (Sandra); W. Eveleens (Wietske); A. Feilzer (Albert)

2004-01-01

textabstractIn designing of production systems, economic and social goals can be combined, if ergonomics is integrated into the design process. More than 50 years of ergonomics research and practice have resulted in a large number of ergonomics standards for designing physical and organizational

Analysis of the implementation of ergonomic design at the new units of an oil refinery.

Science.gov (United States)

Passero, Carolina Reich Marcon; Ogasawara, Erika Lye; Baú, Lucy Mara Silva; Buso, Sandro Artur; Bianchi, Marcos Cesar

2012-01-01

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.

Comparison of four specific dynamic office chairs with a conventional office chair: impact upon muscle activation, physical activity and posture.

Science.gov (United States)

Ellegast, Rolf P; Kraft, Kathrin; Groenesteijn, Liesbeth; Krause, Frank; Berger, Helmut; Vink, Peter

2012-03-01

Prolonged and static sitting postures provoke physical inactivity at VDU workplaces and are therefore discussed as risk factors for the musculoskeletal system. Manufacturers have designed specific dynamic office chairs featuring structural elements which promote dynamic sitting and therefore physical activity. The aim of the present study was to evaluate the effects of four specific dynamic chairs on erector spinae and trapezius EMG, postures/joint angles and physical activity intensity (PAI) compared to those of a conventional standard office chair. All chairs were fitted with sensors for measurement of the chair parameters (backrest inclination, forward and sideward seat pan inclination), and tested in the laboratory by 10 subjects performing 7 standardized office tasks and by another 12 subjects in the field during their normal office work. Muscle activation revealed no significant differences between the specific dynamic chairs and the reference chair. Analysis of postures/joint angles and PAI revealed only a few differences between the chairs, whereas the tasks performed strongly affected the measured muscle activation, postures and kinematics. The characteristic dynamic elements of each specific chair yielded significant differences in the measured chair parameters, but these characteristics did not appear to affect the sitting dynamics of the subjects performing their office tasks. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Influence of Ergonomics on Traffic Safety and Economy Development

Directory of Open Access Journals (Sweden)

Teodor Perić

2004-09-01

Full Text Available As an interdisciplinary science, ergonomics needs to makethe operating of traffic safer, faster and more reliable, for thesake of higher profitability and generally improved economiceffects. This is achieved by adapting and shaping the workplace,machines, transport means, equipment, physical environment,working process etc. according to experience abouthuman anatomic physica~ sociologica~ intellectual and otherminimal, average or maximal capabilities. Therefore, it is necessaryto analyse ergonomics from the standpoint of better productivenessof humans, greater safety (comfort and security ingeneral.

Conditions and strategies for integrating ergonomics into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

Ergonomics considerations at the stage of product development in industry is a major strategy for prevention of work-related injuries and illnesses among employees at the time of manufacture of new products. This study elucidates some important conditions and possibilities for integrating...... such considerations during the product development process. Special attention is paid to the role of design and production engineers. Based on different understandings of the product development process four approaches to integration of ergonomics are outlined....

Ergonomic design for operator flexibility

International Nuclear Information System (INIS)

Pope, R.H.

1980-01-01

The Three Mile Island accident highlighted the importance of ergonomic design of control rooms. Emphasis has been on a reappraisal of the reactor/operator interface, but in the United Kingdom the CEGB maintains that safe efficient operation needs a centralised information system optimised for all control room staff. (author)

Doing 'organizational work': expanding the conception of professional practice in ergonomics.

Science.gov (United States)

Theberge, N; Neumann, W P

2010-12-01

Literature on ergonomic practice contains many discussions of how ergonomists should work but far less attention has been paid to how they do work and the factors that influence their practice. In an effort to improve our understanding of ergonomic practice as it occurs and how it is conditioned by broader contexts, we conducted an interview study with 21 ergonomists in Canada. We were particularly interested to understand the different kinds of activities study participants engaged in during the course of their work, the challenges they faced and the strategies they employed for facing these challenges. Findings indicate that in the course of their professional practice ergonomists engage in a variety of types of activities. This includes consulting on risk factors as well as a proactive role of fostering the application of ergonomics in organizations. The process of advocating for ergonomics brought study participants into a variety of interactions and collaborations with workplace parties in a type of activity we have called "organizational work". In the course of doing organizational work, ergonomists utilize different strategies, including "political manoeuvring", tailoring data collection and report presentations to clients' concerns and 'goal hooking' in order to make the case for implementing ergonomics in workplaces. The article concludes with a list of "tips" for practicing ergonomists that are suggested by the analysis. Copyright © 2010 Elsevier Ltd. All rights reserved.

Ergonomics of mining machinery and transport in the South African mining industry.

CSIR Research Space (South Africa)

Schutte, PC

2003-03-01

Full Text Available this background, a study was conducted to assess the ergonomics of a number of mining machines and transport systems to identify the ergonomics-related hazards that could impact on the operators’ ability to work safely and efficiently....

A framework for using simulation methodology in ergonomics interventions in design projects

DEFF Research Database (Denmark)

Broberg, Ole; Duarte, Francisco; Andersen, Simone Nyholm

2014-01-01

The aim of this paper is to outline a framework of simulation methodology in design processes from an ergonomics perspective......The aim of this paper is to outline a framework of simulation methodology in design processes from an ergonomics perspective...

Ergonomics Risk Assessment with Participation of Supervisors in Production Line: a Successful Experience in Pars Khodro Company

Directory of Open Access Journals (Sweden)

Adel Mazloumi

2014-04-01

Full Text Available Background & Objectives: According to previous researches, workers' participation in issues affecting their working condition is the key to success in ergonomics interventions in working environments. Therefore, the present study was performed to increase active particapitation of supervisors in production line and also to identify and assess ergonomics risks and presenting modification actions (Kaizen by themselves in Pars Khodro automobile manufacturing company. Methods: A manual regarding lifting objects and body postures, according to the Finish evaluation method, was provided for supervisors in production line and related trainings were presented to them. Then, they were asked to insert the results of their assessments and suggestions in special forms during one year. The presented assessments and suggestions were examined by ergonomics experts. Results: According to the assessments conducted by supervisors, 26 work stations had high ergonomics risks, 51 had ergonomics risks with an average level, and 45 had low ergonomics risks. Moreover, the number of required Kaizens presented by supervisors was increased from 18 cases in the first year to 42 cases in the second year, after implementation of ergonomics training and identifying and assessing ergonomic risks by supervisors. Conclusion: Empowering and training supervisors increased workers' participation. In case of adequate training, supervisors can present practical solutions to reduce ergonomics risks in their workstations.

The concept of contradiction in ergonomics practice.

Science.gov (United States)

Nathanael, Dimitris; Zarboutis, Nikos; Marmaras, Nicolas

2012-01-01

The present communication deals with the methodology of the ergonomics field intervention process. It proposes an operationalized version of work analysis in terms of contradictions. The aim is to demonstrate that such a dialectic tool and method of representation may assist the ergonomist to frame the essence of a work activity in practical terms, swiftly and in a manner that preserves its multifaceted unity. The proposed method is inspired by two theoretical constructs (i) contradiction as used in Cultural Historical Activity Theory and (ii) regulation, as developed and used by the francophone tradition of ergonomics of activity. Two brief examples of its use are presented and a discussion is made on further developments and possible pitfalls.

Global ergonomics strategy in Volkswagen: from the product construction, over the planning until the serial process.

Science.gov (United States)

Toledo, Begoña

2012-01-01

The Volkswagen Group operates and coordinates the activities of ergonomics from Wolfsburg in Germany and works with its contact persons of every plant and brand of the group towards an integrated proceeding relating to ergonomics. For the ergonomic process it is very important to consider the ergonomics in the whole production process, still from the beginning the conception and construction of the vehicle in the early phases. In these phases there is a big potential to work in the preventive ergonomics and avoid correcting the workstations after start of production. Therefore, it is important to have fluently information in all this phases and identify the potential in each of them. In order to attend these items, Volkswagen has defined different activity fields: coordination of ergonomic standards and the roll-out into all the plants, introducing the ergonomic items in the product development process (PEP), considering the constant improvement of the workplaces in the Volkswagen-Way (KVP and 3P Workshops), taking care of an adequate qualification concept in ergonomics and the intern and extern information exchange within the committees. This topic is established in the industrial engineering of the production area of the group. We are working interdisciplinary with the medical services, human resources, work council and the protection of labor.

Effectivness of different teaching methods on ergonomics for 12-16 years old children working with computer

OpenAIRE

Jasionytė, Monika

2016-01-01

Effectivness of Different Teaching Methods on Ergonomics for 12-16 Years Old Children Working with Computer. Work author: Monika Jasionytė Work advisor: assistant Inga Raudonytė, Vilnius University faculty of Medicine Department of Rehabilitation, Physical and Sports Medicine. Main concept: ergonomics, children, methods. Work goal: figure out which teaching method is moust efficiant for 12-16 years old children, work with computer ergonomics Goals: 1. Figure out computer working place ergonom...

Ergonomic behaviour of learners in a digitally driven school environment: Modification using an ergonomic intervention programme

Directory of Open Access Journals (Sweden)

Ingrid V. Sellschop

2018-04-01

Clinical implications: The clinical contribution of this study to our healthcare system is that through the early identification and intervention of the poor ergonomics in a school environment, a positive impact on reducing poor postural behaviour amongst learners can be achieved.

The Minimally Invasive Manipulator: an ergonomic and economic non-robotic alternative for endoscopy?

Science.gov (United States)

Bosma, Jesse; Aarts, Sanne; Jaspers, Joris

2015-02-01

Since the da Vinci robotic system was introduced, it has been reported to have ergonomic advantages over conventional laparoscopy (COV). High investments associated with this system challenged us to design a more economical, mechanical alternative for improvement of laparoscopic ergonomics: the Minimally Invasive Manipulator (MIM). An earlier reported MIM prototype was investigated. Its shortcomings were input for the establishment of design criteria for a new prototype. A new prototype was developed, aiming at improved intuitiveness and ergonomics. The handle and instrument tip were redesigned and the parallelogram mechanism was converted from linear moving parts to mainly rotating parts. The new prototype was tested by a panel of experts and novices during an indicative ergonomic experiment. A major advantage of the MIM seems to be the possibility to perform laparoscopic surgery in a sitting position, in line with the working axis, instead of standing at the side of the patient. At an estimated cost level of 10% of the da Vinci system, the MIM can be an economical alternative for the enhancement of laparoscopy ergonomics. However, further development for clinical feasibility is necessary.

The dentist's operating posture - ergonomic aspects.

Science.gov (United States)

Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

2014-06-15

The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist's physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture.

Design of control rooms and ergonomics in power plants

International Nuclear Information System (INIS)

Herbst, L.; Hinz, W.

1981-01-01

Modern power plant control rooms are characterized by automation of protection and control functions, subdivision according to functions, computer-aided information processing, and ergonomic design. Automation relieves the personnel of stress. Subdivision according to functions permits optimized procedures. Computer-aided information processing results in variable information output tailored to the actual needs. Ergonomic design assures qualified man-machine interaction. Of course, these characteristics will vary between power plants in dependence of unit power, mode of operation, and safety and availability requirements. (orig.) [de

An investigation of low ergonomics risk awareness, among staffs at early product development phase in Malaysia automotive industries

Science.gov (United States)

Aziz, Fazilah Abdul; Razali, Noraini; Najmiyah Jaafar, Nur

2016-02-01

Currently there are many automotive companies still unable to effectively prevent consequences of poor ergonomics in their manufacturing processes. This study purpose is to determine the surrounding factors that influence low ergonomics risk awareness among staffs at early product development phase in Malaysia automotive industry. In this study there are four variables, low ergonomic risk awareness, inappropriate method and tools, tight development schedule and lack of management support. The survey data were gathered from 245 respondents of local automotive companies in Malaysia. The data was analysed through multiple regression and moderated regression using the IBM SPSS software. Study results revealed that low ergonomic risk awareness has influenced by inappropriate method and tool, and tight development schedule. There were positive linear relationships between low ergonomic risk awareness and inappropriate method and tools, and tight development schedule. The more inappropriate method and tools applied; the lower their ergonomic risk awareness. The more tight development schedule is the lower ergonomic risk awareness. The relationship between low ergonomic risk awareness and inappropriate method and tools depends on staff's age, and education level. Furthermore the relationship between low ergonomic risk awareness and tight development schedule depends on staff's working experience and number of project involvement. The main contribution of this paper was identified the number of factors of low ergonomics risk awareness and offers better understanding on ergonomics among researchers and automotive manufacturer's employees during product development process.

Determinants of business sustainability: an ergonomics perspective.

Science.gov (United States)

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

Directory of Open Access Journals (Sweden)

Julitta S. Boschman

2015-06-01

Conclusion: Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures.

Ergonomics program management in Tucuruí Hydropower Plant using TPM methodology.

Science.gov (United States)

Santos, R M; Sassi, A C; Sá, B M; Miguez, S A; Pardauil, A A

2012-01-01

This paper aims to present the benefits achieved in the ergonomics process management with the use of the TPM methodology (Total Productive Maintenance) in Tucuruí Hydropower Plant. The methodology is aligned with the corporate guidelines, moreover with the Strategic Planning of the company, it is represented in the TPM Pillars including the Health Pillar in which is inserted the ergonomics process. The results of the ergonomic actions demonstrated a 12% reduction over the absenteeism rate due to musculoskeletal disorders, solving 77,0% of ergonomic non-conformities, what favored the rise of the Organizational Climate in 44,8%, impacting on the overall performance of the company. Awards confirmed the success of the work by the achievement of the Award for TPM Excellence in 2001, Award for Excellence in Consistent TPM Commitment in 2009 and more recently the Special Award for TPM Achievement, 2010. The determination of the high rank administration and workers, allied with the involvement/dynamism of Pillars, has assured the success of this management practice in Tucuruí Hydropower Plant.

Sustainable Ergonomic Program - Basic Condition for Implementation of Corporate Social Responsibility

Science.gov (United States)

Marková, Petra; Beňo, Rastislav; Hatiar, Karol

2012-12-01

Gradually increasing pressure on companies to start to behave socially responsible is a response to social, environmental and economic requirements. The society faces a period of changes that have occurred since the beginning of the crisis and revealing weaknesses in the economy. We become witnesses of rapid changes and challenges posed by globalization, lack of resources, demographic structure and innovation. Objective necessity becomes a corporate social responsibility (CSR) already at the companies’ level, which is supported by the approach of the EU institutions and the Slovak Republic. One of the possible appliance through which we can contribute to the sustainability of CSR are sustainable ergonomic programs. When we want to talk about sustainable ergonomic program is important to focus on three key areas. The first area is the Impact of technic and technology to employees at work, the second area is the Importance and impact of socially responsible HR in ergonomics and last area is the Creation of the work environment in relation to environmental sustainability. Ergonomic programs sustainability requires to apply appropriate methods for evaluation of their cost benefit and health effect.

The implementation of ergonomics advice and the stage of change approach.

Science.gov (United States)

Rothmore, Paul; Aylward, Paul; Karnon, Jonathan

2015-11-01

This paper investigates the implementation of injury prevention advice tailored according to the Stage of Change (SOC) approach. The managers of 25 workgroups, drawn from medium to large companies across a wide range of occupational sectors were allocated to receive either standard ergonomics advice or ergonomics advice tailored according to the workgroup SOC. Twelve months after the advice was provided, semi-structured interviews were conducted with each manager. In a multivariate model, managers who had received tailored advice were found to have implemented significantly more of the recommended changes (IRR = 1.68, 95% CI 1.07-2.63) and more "additional" changes (IRR = 1.90, 95% CI 1.12-3.20). Qualitative analysis identified that the key barriers and facilitators to the implementation of changes were largely related to worker resistance to change and the attitudes of senior managers towards health and safety. The findings from this study suggest that the implementation of ergonomics recommendations may be improved by the tailoring of advice according to SOC principles. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

Science.gov (United States)

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

Prevalence of Musculoskeletal Disorders Among Office Workers

Directory of Open Access Journals (Sweden)

Valipour Noroozi

2015-01-01

Full Text Available Background Musculoskeletal disorders are among common occupational diseases in the world, which have high prevalence not only among hard and hurtful jobs, but also in office works. Objectives The purpose of this study was to describe the prevalence of musculoskeletal disorders (MSDs among office workers of Ahvaz Jundishapur University of Medical Sciences. Patients and Methods This study carried out intermittently among 392 individuals of Ahvaz Jundishapur University of Medical Sciences office workers by Nordic questionnaire from October 2013 to December 2013. Study population included office workers of different departments as well as central organization and library. We use descriptive statistic, t test and chi-square test for data analysis. Results The mean and standard deviation of participants’ age was 35.4 ± 6.7 years and their work experience was 9.7 ± 6.65 years, respectively. Most signs (51% were in back region, which forced 18.9% of individuals to withdraw from daily activities. Statistical analysis also showed 36.7% neck disorders in office workers, which demonstrated significant association with age and work experience (P < 0.001. Conclusions Significant association of work experience and age with musculoskeletal disorders shows that individual’s education and knowledge improvements with regard to ergonomics risk factors and correction of work postures are very important and ought to follow management and technical practices in the organization.

Nonlinear dynamical systems for theory and research in ergonomics.

Science.gov (United States)

Guastello, Stephen J

2017-02-01

Nonlinear dynamical systems (NDS) theory offers new constructs, methods and explanations for phenomena that have in turn produced new paradigms of thinking within several disciplines of the behavioural sciences. This article explores the recent developments of NDS as a paradigm in ergonomics. The exposition includes its basic axioms, the primary constructs from elementary dynamics and so-called complexity theory, an overview of its methods, and growing areas of application within ergonomics. The applications considered here include: psychophysics, iconic displays, control theory, cognitive workload and fatigue, occupational accidents, resilience of systems, team coordination and synchronisation in systems. Although these applications make use of different subsets of NDS constructs, several of them share the general principles of the complex adaptive system. Practitioner Summary: Nonlinear dynamical systems theory reframes problems in ergonomics that involve complex systems as they change over time. The leading applications to date include psychophysics, control theory, cognitive workload and fatigue, biomechanics, occupational accidents, resilience of systems, team coordination and synchronisation of system components.

The effects of ergonomic stressors on process tool maintenance and utilization

Energy Technology Data Exchange (ETDEWEB)

Miller, D.

1998-03-31

This study examines ergonomic stressors associated with front-end process tool maintenance, relates them to decreased machine utilization, and proposes solution strategies to reduce their negative impact on productivity. Member company ergonomists observed technicians performing field maintenance tasks on seven different bottleneck tools and recorded ergonomic stressors using SEMaCheck, a graphics-based, integrated checklist developed by Sandia National Laboratories. The top ten stressors were prioritized according to a cost formula that accounted for difficulty, time, and potential errors. Estimates of additional time on a task caused by ergonomic stressors demonstrated that machine utilization could be increased from 6% to 25%. Optimal solution strategies were formulated based on redesign budget, stressor cost, and estimates of solution costs and benefits

Formulation of the task on ergonomic designing of NPP operator activity

International Nuclear Information System (INIS)

Anokhin, A.N.

1996-01-01

One of the main causes of inefficiency of existing nuclear plant operator activity support means is the absence of common integrated system approach to ergonomic designing of operator activity. Some attempt to formalize the problem as a task of macro-ergonomic designing is made. The structure of anthropocentric functional model of human-operator-nuclear plant system operation is described. Operator activity is characterized by some resulting properties (such as reliability, etc.). These properties are influenced by human-operator internal properties and working environment external properties. The detailed classification of all these properties is offered. The main result of this work is the statement of tasks of operator activity macro-ergonomic designing based on the offered formalization

Design and management of production systems: Integration of human factors and ergonomics

DEFF Research Database (Denmark)

Jensen, Per Langå; Broberg, Ole; Hasle, Peter

2006-01-01

Integration of ergonomics, human factors and occupational health and safety into design and management of pro-duction systems has for years been the major strategy for professional within the field. The traditional approach based on establishing ergonomic criteria’s to be integrated into other...

Promoting ergonomics in Algeria: activities of "the research and training laboratory" in the University of Oran.

Science.gov (United States)

Mebarki, Bouhafs; El-Bachir, Tebboune Cheikh

2012-01-01

The growing need in Algeria to develop ergonomics knowledge and practice in industry was behind the initiative to develop a training and research project within the ergonomics laboratory at Oran University. Since 2005 the laboratory team is running an academic option master in work design and ergonomics. The evaluation of the academic master in 2010 revealed the acute need of the local industry for professional competences in ergonomic and work psychology. A professional training master program in "ergonomics & work psychology" was then developed in partnership with local industry, five European Universities and six Universities from three Maghreb countries. Research projects were initiated around the two training programs, in conjunction with a number of ergonomics dissemination and promotion activities. Preliminary results of the project are presented and discussed in relation to the local context, and in the light of similar cases in Industrially Developing Countries.

From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

Science.gov (United States)

Moraes, A S P; Arezes, P M; Vasconcelos, R

2012-01-01

The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

ERGONOMIC DESIGN OF AIRCRAFT COCKPIT

Directory of Open Access Journals (Sweden)

CÎMPIAN Ionuţ

2012-09-01

Full Text Available This paper presents a model for an ergonomic design of an aircraft cockpit with the specification and verification with respect to the new European Aviation Safety Agency (EASA and Federal Aviation Administration (FAA requirements. The goal is to expressing the concepts on which the aircraft cockpit design are based.

ERGONOMIC DESIGN OF AIRCRAFT COCKPIT

Directory of Open Access Journals (Sweden)

CÎMPIAN Ionuţ

2011-06-01

Full Text Available This paper presents a model for an ergonomic design of an aircraft cockpit with the specification and verification with respect to the new European Aviation Safety Agency (EASA and Federal Aviation Administration (FAA requirements. The goal is to expressing the concepts on which the aircraft cockpit design is based.

A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

Science.gov (United States)

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

Casting an ergonomic eye on university libraries.

Science.gov (United States)

Ferrer, Nicole; Villarouco, Vilma

2012-01-01

Research in the field of Ergonomics of the Built Environment has been developed with a view to consolidating studies in this area, the objective of which is to provide evidence that the joint participation of users and designers on drawing up projects is important. In this context, the theme of this study is to investigate the interactions between users and the environment in a university library. To do so, well-established techniques from Ergonomics, Architecture and Environmental Psychology were used to make a functional and behavioral evaluation to identify the level of user satisfaction in six libraries in the various study centers of the Federal University of Pernambuco in Recife, northeast Brazil, so as to identify the strengths and also weaknesses in these spatial structures.

Acoustic evaluation and adjustment of an open-plan office through architectural design and noise control.

Science.gov (United States)

Passero, Carolina Reich Marcon; Zannin, Paulo Henrique Trombetta

2012-11-01

Arranging office space into a single open room offers advantages in terms of easy exchange of information and interaction among coworkers, but reduces privacy and acoustic comfort. Thus, the purpose of this work was to evaluate the acoustic quality of a real open-plan office and to propose changes in the room to improve the acoustic conditioning of this office. The computational model of the office under study was calibrated based on RT and STI measurements. Predictions were made of the RT and STI, which generated the radius of distraction r(D), and the rate of spatial decay of sound pressure levels per distance doubling DL(2) in the real conditions of the office and after modifications of the room. The insertion of dividers between work stations and an increase in the ceiling's sound absorption improved the acoustic conditions in the office under study. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic assessment for the task of repairing computers in a manufacturing company: A case study.

Science.gov (United States)

Maldonado-Macías, Aidé; Realyvásquez, Arturo; Hernández, Juan Luis; García-Alcaraz, Jorge

2015-01-01

Manufacturing industry workers who repair computers may be exposed to ergonomic risk factors. This project analyzes the tasks involved in the computer repair process to (1) find the risk level for musculoskeletal disorders (MSDs) and (2) propose ergonomic interventions to address any ergonomic issues. Work procedures and main body postures were video recorded and analyzed using task analysis, the Rapid Entire Body Assessment (REBA) postural method, and biomechanical analysis. High risk for MSDs was found on every subtask using REBA. Although biomechanical analysis found an acceptable mass center displacement during tasks, a hazardous level of compression on the lower back during computer's transportation was detected. This assessment found ergonomic risks mainly in the trunk, arm/forearm, and legs; the neck and hand/wrist were also compromised. Opportunities for ergonomic analyses and interventions in the design and execution of computer repair tasks are discussed.

Green ergonomics: challenges and opportunities.

Science.gov (United States)

Hanson, Margaret A

2013-01-01

Addressing the causes and consequences of environmental degradation presents significant challenges for humankind. This paper considers what ergonomics/human factors (E/HF) professionals can contribute to understanding and tackling some of the issues that arise through the movement towards a more environmentally sustainable economy. These issues are considered in relation to work in green industries (specifically, sustainable energy production, recycling and organic food production), and there is a need to ensure that these jobs are safe and healthy; the design of products and systems that are 'environmentally friendly' to facilitate their acceptability and use and how E/HF professionals can contribute to understanding and promoting behavioural change relating to environmental choices. The activities of some international organisations in this area are identified and the potential for E/HF involvement is considered. The implications for the E/HF profession are discussed. This paper considers how ergonomics/human factors professionals can contribute to the movement towards more sustainable and 'environmentally friendly' design and work. Potential challenges and opportunities are discussed in relation to jobs in green industries, products and systems and behaviour change.

Activities and Ergonomics of Workers in Broiler Hatcheries

Directory of Open Access Journals (Sweden)

CCS Carvalho

2015-06-01

Full Text Available The objective this study was to assess ergonomic factors, posture and biomechanics of workers of a broiler egg hatchery. The analysis of ergonomic factors was based on physical work load, thermal environment, and exposure to light and noise. The posture of workers was analyzed using photographic records which were evaluated by the software program OWAS (Ovako Working Posture Analysing System. A biomechanics analysis was also performed based on the photographs taken of the employee at various angles, which were used as inputs to the Michigan two-dimensional biomechanical model software program. The results show that certain activities can be considered unhealthy due to the exposure of employees to physical and thermal overload. The continuous noise levels and lighting were outside the range considered adequate by the regulations of the Brazilian Ministry of Labor. The manner in which certain activities are carried out when associated with weight and poor posture can result in body lesions in broiler hatchery employees. It is therefore necessary to apply specific ergonomic programs, including scheduled breaks, training, and other measures in order to reduce or to eliminate the risks involved in these activities.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial.

Science.gov (United States)

Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

2014-04-17

More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance strategies. When these strategies are

Office workers' computer use patterns are associated with workplace stressors.

Science.gov (United States)

Eijckelhof, Belinda H W; Huysmans, Maaike A; Blatter, Birgitte M; Leider, Priscilla C; Johnson, Peter W; van Dieën, Jaap H; Dennerlein, Jack T; van der Beek, Allard J

2014-11-01

This field study examined associations between workplace stressors and office workers' computer use patterns. We collected keyboard and mouse activities of 93 office workers (68F, 25M) for approximately two work weeks. Linear regression analyses examined the associations between self-reported effort, reward, overcommitment, and perceived stress and software-recorded computer use duration, number of short and long computer breaks, and pace of input device usage. Daily duration of computer use was, on average, 30 min longer for workers with high compared to low levels of overcommitment and perceived stress. The number of short computer breaks (30 s-5 min long) was approximately 20% lower for those with high compared to low effort and for those with low compared to high reward. These outcomes support the hypothesis that office workers' computer use patterns vary across individuals with different levels of workplace stressors. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic solutions to support forced static positions at work

Directory of Open Access Journals (Sweden)

Suszyński Marcin

2017-01-01

Full Text Available The article analyzes the available ergonomic constructions used for the support of the musculoskeletal system during static, prolonged work performed in forced positions. Possible evaluation methods are presented as well as ergonomic considerations of work performed in inclined positions, where there is no possibility of influencing the working plane. As a result of the presented work, a set of criteria has been proposed and the requirements for methods which can be used to evaluate the technical constructions supporting the worker during tasks performed in forced and static positions.

Evaluating the Ergonomics of Flexible Ureteroscopy.

Science.gov (United States)

Ludwig, Wesley W; Lee, Gyusung; Ziemba, Justin B; Ko, Joan S; Matlaga, Brian R

2017-10-01

To date, the ergonomics of flexible ureteroscopy (URS) have not been well described. We performed a study to assess the biomechanical stresses on urologists performing URS and to investigate the effect of ureteroscope type on these parameters. Electromyography (EMG) was used to quantify the activation level of muscle groups involved in URS. Surface EMG electrodes (Delsys, Boston, MA) were placed on the right and left thenar, flexor carpi ulnaris (FCU), extensor carpi ulnaris (ECU), biceps, triceps, and deltoid. Three endoscopes were studied: single-use digital (Boston Scientific LithoVue), reusable digital (Karl Storz Flex-X c ), and reusable fiber-optic (Karl Storz Flex-X 2 ). Each ureteroscope was used to perform a set sequence of navigation and procedural tasks in a training model. EMG data were processed and normalized to compare the maximum voluntary contractions between muscle groups. Cumulative muscular workload (CMW) and average muscular work per second (AWS) were used for comparative analysis. For navigational tasks, CMW and AWS were greatest for the ECU, followed in descending order by right and left thenar, FCU, biceps, deltoid, and triceps. For procedural tasks, CMW and AWS were greatest for the right thenar, followed in descending order by the left thenar, ECU, FCU, triceps, biceps, and deltoid. During navigational tasks, both LithoVue and Flex-X c had lower CMWs for every muscle group than Flex-X 2 (p ergonomics of URS. Both the single-use and reusable digital ureteroscopes have similar profiles, and both have significantly better ergonomic metrics than the reusable fiber-optic ureteroscope.

QFD: a methodological tool for integration of ergonomics at the design stage.

Science.gov (United States)

Marsot, Jacques

2005-03-01

As a marked increase in the number of musculoskeletal disorders was noted in many industrialized countries and more specifically in companies that require the use of hand tools, the French National Research and Safety Institute launched in 1999 a research program on the topic of integrating ergonomics into hand tool design. After a brief review of the problems of integrating ergonomics at the design stage, the paper shows how the "Quality Function Deployment" method has been applied to the design of a boning knife and it highlights the difficulties encountered. Then, it demonstrates how this method can be a methodological tool geared to greater ergonomics consideration in product design.

Ergonomic analysis of radiopharmaceuticals samples preparation process

International Nuclear Information System (INIS)

Gomes, Luciene Betzler C.; Santos, Isaac Luquetti dos; Fonseca, Antonio Carlos C. da; Pellini, Marcos Pinto; Rebelo, Ana Maria

2005-01-01

The doses of radioisotopes to be administrated in patients for diagnostic effect or therapy are prepared in the radiopharmacological sector. The preparation process adopts techniques that are aimed to reduce the exposition time of the professionals and the absorption of excessive doses for patients. The ergonomic analysis of this process contributes in the prevention of occupational illnesses and to prevent risks of accidents during the routines, providing welfare and security to the involved users and conferring to the process an adequate working standard. In this context it is perceived relevance of studies that deal with the analysis of factors that point with respect to the solution of problems and for establishing proposals that minimize risks in the exercise of the activities. Through a methodology that considers the application of the concepts of Ergonomics, it is searched the improvement of the effectiveness or the quality and reduction of the difficulties lived for the workers. The work prescribed, established through norms and procedures codified will be faced with the work effectively carried through, the real work, shaped to break the correct appreciation, with focus in the activities. This work has as objective to argue an ergonomic analysis of samples preparation process of radioisotopes in the Setor de Radiofarmacia do Hospital Universitario Clementino Fraga Filho da Universidade Federal do Rio de Janeiro (UFRJ). (author)

World War II and other historical influences on the formation of the Ergonomics Research Society.

Science.gov (United States)

Waterson, Patrick

2011-12-01

Little has been written about wartime ergonomics and the role this played in prompting the need for a society dedicated to ergonomics within the UK, namely the formation of the Ergonomics Research Society (ERS) in early 1950. This article aims to fill this gap in our understanding of the history of ergonomics in the UK and provide further details of the types of research undertaken by wartime research groups and committees such as the Institute of Aviation Medicine, Medical Research Council Applied Psychology Unit and the Flying Personnel Research Committee. In addition, the role of societal developments such as wartime links with the USA, the post-war drive to increase productivity and collaboration with industry and the recommendations of government committees in stimulating the work of the ERS are described in detail. This article also offers some reflection on present-day ergonomics in the UK and how this contrasts with the past. STATEMENT OF RELEVANCE: This article will provide practitioners with a historical perspective on the development of ergonomics from its roots in the Second World War. These developments shed light on current trends and challenges within the discipline as a whole.

Stress, Visual and Musculoskeletal Complaints in Open Plan Office Staff

Directory of Open Access Journals (Sweden)

Vangelova K.

2014-06-01

Full Text Available The aim of the study was to identify the main ergonomic and organizational risks contributing to stress, visual and musculoskeletal disorders in open plan office workers. A total of 73 subjects of mean age 28.3 ±4.7 years were studied. Measurements of salivary cortisol and self-ratings for strain, fatigue, stress symptoms, visual and musculoskeletal complaints were performed. The work places were organized well, but the studied staff reported high work load and time pressure. The data showed higher cortisol levels during the workday under time pressure. High incidence of visual and musculoskeletal complaints mainly in the region of the back and the neck were found, associated with flickering and blinks on the screen monitors and overtime. Optimizing workplace organization could help reduce stress and health complaints of office staff.

Removal of simulated biofilm: a preclinical ergonomic comparison of instruments and operators.

Science.gov (United States)

Graetz, Christian; Plaumann, Anna; Rauschenbach, Sebastian; Bielfeldt, Jule; Dörfer, Christof E; Schwendicke, Falk

2016-07-01

Periodontal scaling might cause musculoskeletal disorders, and scaling instruments might not only have different effectiveness and efficiency but also differ in their ergonomic properties. The present study assessed ergonomic working patterns of experienced (EO) and less experienced operators (LO) when using hand and powered devices for periodontal scaling and root planning. In an experimental study using periodontally affected manikins, sonic (AIR), ultrasonic (TIG) and hand instruments (GRA) were used by 11 operators (7 EO/4 LO) during simulated supportive periodontal therapy. Using an electronic motion monitoring system, we objectively assessed the working frequency and positioning of hand, neck and head. Operators' subjective evaluation of the instruments was recorded using a questionnaire. Hand instruments were used with the lowest frequency (2.57 ± 1.08 s(-1)) but greatest wrist deviation (59.57 ± 53.94°). EO used instruments more specifically than LO, and generally worked more ergonomically, with less inclination of head and neck in both the frontal and sagittal planes, especially when using hand instruments. All groups found hand instruments more tiring and difficult to use than powered instruments. Regardless of operators' experience, powered instruments were used more ergonomically and were subjectively preferred compared to hand instruments. The use of hand instruments has potential ergonomic disadvantages. However, with increasing experience, operators are able to recognise and mitigate possible risks.

Educational Furniture for the 16-19 Age Group: Specification and Design. Design Note 30.

Science.gov (United States)

Furniture Industry Research Association, Stevenage (England).

A 1982 British study examined the furniture needs of 16-19 year-old students. This report presented the findings on the technical and performance requirements in terms of durability and ergonomics. This report examines the furniture requirements in teaching spaces, social, refreshment and private study areas, storage requirements for pupils'…

The effect of a knowledge-based ergonomic intervention amongst administrators at Aga Khan University Hospital, Nairobi.

Science.gov (United States)

Wanyonyi, Nancy; Frantz, Jose; Saidi, Hassan

2015-01-01

Low back pain (LBP) and neck pain are part of the common work-related musculoskeletal disorders with a large impact on the affected person. Despite having a multifactorial aetiology, ergonomic factors play a major role thus necessitating workers' education. To determine the prevalence of ergonomic-related LBP and neck pain, and describe the effect of a knowledge-based ergonomic intervention amongst administrators in Aga Khan University Hospital, Nairobi. This study applied a mixed method design utilizing a survey and two focus group discussions (FGD). A self-administered questionnaire was distributed to 208 participants through systematic sampling. A one hour knowledge-based ergonomic session founded on the survey results was thereafter administered to interested participants, followed by two FGDs a month later with purposive selection of eight participants to explore their experience of the ergonomic intervention. Quantitative data was captured and analyzed using SPSS by means of descriptive and inferential statistics, whereas thematic content analysis was used for qualitative data. Most participants were knowledgeable about ergonomic-related LBP and neck pain with a twelve month prevalence of 75.5% and 67.8% respectively. Continual ergonomic education is necessary for adherence to health-related behaviours that will preventwork-related LBP and neck pain.

Global drivers, sustainable manufacturing and systems ergonomics.

Science.gov (United States)

Siemieniuch, C E; Sinclair, M A; Henshaw, M J deC

2015-11-01

This paper briefly explores the expected impact of the 'Global Drivers' (such as population demographics, food security; energy security; community security and safety), and the role of sustainability engineering in mitigating the potential effects of these Global Drivers. The message of the paper is that sustainability requires a significant input from Ergonomics/Human Factors, but the profession needs some expansion in its thinking in order to make this contribution. Creating a future sustainable world in which people experience an acceptable way of life will not happen without a large input from manufacturing industry into all the Global Drivers, both in delivering products that meet sustainability criteria (such as durability, reliability, minimised material requirement and low energy consumption), and in developing sustainable processes to deliver products for sustainability (such as minimum waste, minimum emissions and low energy consumption). Appropriate changes are already being implemented in manufacturing industry, including new business models, new jobs and new skills. Considerable high-level planning around the world is in progress and is bringing about these changes; for example, there is the US 'Advanced Manufacturing National Program' (AMNP)', the German 'Industrie 4.0' plan, the French plan 'la nouvelle France industrielle' and the UK Foresight publications on the 'Future of Manufacturing'. All of these activities recognise the central part that humans will continue to play in the new manufacturing paradigms; however, they do not discuss many of the issues that systems ergonomics professionals acknowledge. This paper discusses a number of these issues, highlighting the need for some new thinking and knowledge capture by systems ergonomics professionals. Among these are ethical issues, job content and skills issues. Towards the end, there is a summary of knowledge extensions considered necessary in order that systems ergonomists can be fully

Ergonomics intervention on an alternative design of a spinal board.

Science.gov (United States)

Zadry, Hilma Raimona; Susanti, Lusi; Rahmayanti, Dina

2017-09-01

A spinal board is the evacuation tool of first aid to help the injured spinal cord. The existing spinal board has several weaknesses, both in terms of user comfort and the effectiveness and efficiency of the evacuation process. This study designs an ergonomic spinal board using the quality function deployment approach. A preliminary survey was conducted through direct observation and interviews with volunteers from the Indonesian Red Cross. Data gathered were translated into a questionnaire and answered by 47 participants in West Sumatra. The results indicate that the selection of materials, the application of strap systems as well as the addition of features are very important in designing an ergonomic spinal board. The data were used in designing an ergonomic spinal board. The use of anthropometric data ensures that this product can accommodate safety and comfort when immobilized, as well as the flexibility and speed of the rescue evacuation process.

Ergonomic (human factors) problems in design of NPPs. A review of TMI and Chernobyl accidents

International Nuclear Information System (INIS)

Huang Xiangrui; Zheng Fuyu; Gao Jia

1994-01-01

The general principle of ergonomic in design of NPPs is given and some causes of TMI and Chernobyl accidents from the view point of human factor engineering are reviewed. The paper also introduces some Ergonomic problems in design, operation and management of earlier NPPs. Some ergonomic principles of man-machine systems design have been described. Some proposals have been suggested for improving human reliability in NPPs

Psychological Care, Patient Education, Orthotics, Ergonomics and Prevention Strategies for Neck Pain

DEFF Research Database (Denmark)

Gross, Anita R; Kaplan, Faith; Huang, Stacey

2013-01-01

To conduct an overview on psychological interventions, orthoses, patient education, ergonomics, and 1⁰/2⁰ neck pain prevention for adults with acute-chronic neck pain.......To conduct an overview on psychological interventions, orthoses, patient education, ergonomics, and 1⁰/2⁰ neck pain prevention for adults with acute-chronic neck pain....

Sources and Nature of Secondary School Teachers' Education in Computer-Related Ergonomics

Science.gov (United States)

Dockrell, Sara; Fallon, Enda; Kelly, Martina; Galvin, Rose

2009-01-01

Teachers' knowledge of computer-related ergonomics in education will have an effect on the learning process and the work practices of their students. However little is known about teacher education in this area. The study aimed to investigate the sources and nature of secondary school teachers' education about computer-related ergonomics. It also…

34 CFR 668.19 - Financial aid history.

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Financial aid history. 668.19 Section 668.19 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION... Programs § 668.19 Financial aid history. (a) Before an institution may disburse title IV, HEA program funds...

Ergonomic initiatives at Inmetro: measuring occupational health and safety.

Science.gov (United States)

Drucker, L; Amaral, M; Carvalheira, C

2012-01-01

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

Exposure level of ergonomic risk factors in hotel industries

Science.gov (United States)

Nasrull Abdol Rahman, Mohd; Syahir Muhamad Jaffar, Mohd; Fahrul Hassan, Mohd; Zamani Ngali, Mohd; Pauline, Ong

2017-08-01

Ergonomic Risk Factors (ERFs) which contribute to Musculoskeletal Disorders (MSDs) among room attendants were considered as a problem or trouble since these ERFs would affect their work performance for hotel industries. The purpose of this study was to examine the exposure level of ERFs among room attendants in hotel industries. 65 of respondents were obtained from selected hotels in Peninsular Malaysia. Data were collected by direct observation via Workplace Ergonomic Risk Assessment (WERA) and Quick Exposure Checklist (QEC). There were 36 males and 29 females room attendants involved throughout the research. Most of room attendants experienced high exposure level for back, leg, forceful and vibration based on the exposure level evaluation through WERA while QEC results showed that all room attendants were found to have moderate exposure level for risk factors including back for movement use, shoulders/arms, wrists/hands and neck. All the results obtained showed that the related ERFs for MSDs were associated and essential ergonomic interventions are needed in order to eliminate risk of exposures to MSDs among room attendants in hotel industries.

Nanomaterials in the field of design ergonomics: present status.

Science.gov (United States)

Chowdhury, Anirban; Sanjog, J; Reddy, Swathi Matta; Karmakar, Sougata

2012-01-01

Application of nanotechnology and nanomaterials is not new in the field of design, but a recent trend of extensive use of nanomaterials in product and/or workplace design is drawing attention of design researchers all over the world. In the present paper, an attempt has been made to describe the diverse use of nanomaterials in product and workplace design with special emphasis on ergonomics (occupational health and safety; thermo-regulation and work efficiency, cognitive interface design; maintenance of workplace, etc.) to popularise the new discipline 'nanoergonomics' among designers, design users and design researchers. Nanoergonomics for sustainable product and workplace design by minimising occupational health risks has been felt by the authors to be an emerging research area in coming years. Use of nanomaterials in the field of design ergonomics is less explored till date. In the present review, an attempt has been made to extend general awareness among ergonomists/designers about applications of nanomaterials/nanotechnology in the field of design ergonomics and about health implications of nanomaterials during their use.

Comparative ergonomic assessment of manual wheelchairs by paraplegic users.

Science.gov (United States)

Gil-Agudo, Angel; Solís-Mozos, Marta; del-Ama, Antonio J; Crespo-Ruiz, Beatriz; de la Peña-González, Ana Isabel; Pérez-Nombela, Soraya

2013-07-01

The aim of the present study was to describe and test the reliability of a comprehensive product-centered approach to assessing functional performance and wheelchair user perceptions on device ergonomics and satisfaction of performance. A pilot study was implemented using this approach to evaluate differences among four manual wheelchairs. Six wheelchair users with complete spinal cord injury (SCI) at the thoracic level and with no previous upper limbs impairment were recruited for this study. After finishing circuit tasks, subjects were asked to complete a questionnaire about ergonomic wheelchair characteristics (manoeuvrability, stability, comfort and ease of propulsion) and satisfaction about task performance. On the other hand, objective data were recorded during user performance as the time required to complete each test, kinetic wheelchair propulsion data obtained with two SMARTWheels® and physiological parameters (heart rate and physiological index). Kuschall Champion® and Otto Bock Voyage® wheelchairs were ranked best for most ergonomic aspects specially in manoeuvrability (p importance of looking both kinds of information, user perception and user functional performance when evaluating a wheelchair or comparing across devices.

Study on functional relationships between ergonomics indexes of manual performance

Science.gov (United States)

Hu, Hui-Min; Ding, Li; Chen, Shou-Ping; Yang, Chun-Xin; Yuan, Xiu-Gan

This paper investigates functional relationships between some of the key ergonomics indexes in manual performance, and attempts to condense the ergonomics appraisal indexes system and thus evaluate hand performance wearing EVA (extravehicular activity) glove, design and improve EVA glove's performance. Four types of ergonomics indexes were studied, i.e., dexterity, tactile sensibility (TS), strength and fatigue. Two test items of insert sticks into a holes-board (ISIHB) and nuts-bolts assembly task (NBAT) were used to measure dexterity, while shape discrimination (SD) was employed for TS, and grip force (GF) for strength and fatigue. The variables measured in this investigation included accomplishing time (AT) of ISIHB and NBAT, correct rate (CR) of SD, maximal grip force (MGF), instant grip force (IGF) and endurance time of grip force (ETGF). Experiments were conducted on 31 undergraduates (eight female and 23 male) with two experiment conditions of bare-hand group and gloved hand group. Results demonstrated that dexterity and TS performance of gloved hand group declined significantly compared with those of bare-hand group (pfatigue between two conditions (p>0.05). Four effective functional relationships were developed between four pairs of ergonomics indexes in bare-hand group. In gloved hand group, in addition to above-mentioned four pairs of relationships, another formula was found, which was y^=0.02061+0.01233x ( p<0.01, dexterity and TS).

Ergonomic evaluation of workload by milk production - a bibliometric analysis.

Science.gov (United States)

de Oliveira, Claudilaine Caldas; Pereira Moro, Antônio Renato; Ulbricht, Leandra; Belinelli, Marjorie; de Souza, Gilberto F M; Gabriel, Michele; Zattar, Izabel Cristina

2017-09-21

The purpose of this study was to select in a structured manner the relevant articles with scientific recognition, and simultaneously identify the characteristics of these publications that may scientifically enrich the theme in a portfolio of papers. The theme involves ergonomics in milk production as a criterion for evaluating and improving organizational performance in the milking sector. The study used ProKnow-C as a theoretical instrument for intervention. The main results show: i) a bibliographic portfolio of 18 items aligned with the view adopted by researchers which served as a theoretical framework for this research; ii) The article entitled "Wrist positions and movements as possible risk factors during machine milking", by Marianne Stål, Gert-Åke Hansson and Ulrich Moritz in 1999 and published in the Journal of Applied Ergonomics presented the highest scientific recognition, iii) the authors highlighted in the bibliographic portfolio or in its references researching the subject are Gert-Åke Hansson, Marianne Stål and Stefan Pinzke, and iv) the International Journal of Industrial Ergonomics shows the highest number of scientific articles in the bibliographic portfolio. The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

Ergonomics and safety in secondary wood processing

Science.gov (United States)

Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih

2002-01-01

The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.

Participatory ergonomics to reduce exposure to psychosocial and physical risk factors for low back pain and neck pain: results of a cluster randomised controlled trial.

Science.gov (United States)

Driessen, Maurice T; Proper, Karin I; Anema, Johannes R; Knol, Dirk L; Bongers, Paulien M; van der Beek, Allard J

2011-09-01

This study investigated the effectiveness of the Stay@Work participatory ergonomics programme to reduce workers' exposure to psychosocial and physical risk factors. 37 departments (n=3047 workers) from four Dutch companies participated in this cluster randomised controlled trial; 19 (n=1472 workers) were randomised to an intervention group (participatory ergonomics) and 18 (n=1575 workers) to a control group (no participatory ergonomics). During a 6 h meeting guided by an ergonomist, working groups devised ergonomic measures to reduce psychosocial and physical workload and implemented them within 3months in their departments. Data on psychosocial and physical risk factors for low back pain and neck pain were collected at baseline and after 6 months. Psychosocial risk factors were measured using the Job Content Questionnaire and physical risk factors using the Dutch Musculoskeletal Questionnaire. Intervention effects were studied using multilevel analysis. Intervention group workers significantly increased on decision latitude (0.29 points; 95% CI 0.07 to 0.52) and decision authority (0.16 points; 95% CI 0.04 to 0.28) compared to control workers. However, exposure to awkward trunk working postures significantly increased in the intervention group (OR 1.86; 95% CI 1.15 to 3.01) compared to the control group. No significant differences between the intervention and control group were found for the remaining risk factors. After 6months, loss to follow-up was 35% in the intervention group and 29% in the control group. Participatory ergonomics was not effective in reducing exposure to psychosocial and physical risk factors for low back pain and neck pain among a large group of workers. ISRCTN27472278.

[Evaluation of ergonomic load of clinical nursing procedures].

Science.gov (United States)

Yan, P; Zhang, L; Li, F Y; Yang, Y; Wang, Y N; Huang, A M; Dai, Y L; Yao, H

2017-08-20

Objective: To evaluate the ergonomic load of clinical nursing procedures and to provide evidence for the prevention and management of work-related musculoskeletal disorders (WMSDs) in nurses. Methods: Based on the nursing unit characteristics and the common departments involving patient-turning procedures, 552 nurses were selected from 6 clinical departments from July to September, 2016. The ergonomic load of four types of patient-turning procedures, i.e., turning the patient's body, changing the bed linen of in-bed patients, moving patients, and chest physiotherapy, was evaluated by the on-site inspectors and self-evaluated by the operators using the Quick Exposure Check. The exposure value, exposure level, and exposure rate of WMSDs were assessed based on the procedure-related physical loads on the back, shoulders/arms, wrists/hands and neck, as well as the loads from work rhythm and work pressure. Results: All surveyed subjects were females who were aged mostly between 26-30 years (49.46%) , with a mean age of 29.66±5.28 years. These nurses were mainly from the Department of Infection (28.99%) and Spine Surgery (21.56%) . There were significant differences in the back, shoulders/arms, neck, work rhythm, and work pressure scores between different nursing procedures ( F =16.613, 5.884, 3.431, 3.222, and 5.085, respectively; P nursing procedures resulted in high to intermediate physical load in nurses. Procedures with high to low level of WMSDs exposure were patient turning (72.69%) , bed linen changing (67.15%) , patient transfer (65.82%) , and chest physiotherapy (58.34%) . In particular, patient turning was considered as very high-risk procedure, whereas others were considered as high-risk procedures. Conclusion: Patient-turning nursing procedures result in high ergonomic load in the operators. Therefore, more focus should be placed on the ergonomics of the caretakers and nurses.

Introduction to ergonomics for healthcare workers.

Science.gov (United States)

Waters, Thomas R

2010-01-01

Healthcare workers who handle and move patients as part of their jobs suffer a disproportionately high number of work-related musculoskeletal disorders (MSDs). The majority of reported work-related MSDs are back pain cases that result in significant numbers of lost work days. It is likely that these lost workdays have a substantial impact on the quality and cost of health care. Patient care ergonomics can reduce the risk of work-related MSDs by helping safety experts design the work so it can be safely performed by most workers. This article provides a general overview of ergonomics--what it is, how it can be used to help design safe work, and why all healthcare workers and administrators should know and understand how excessive work demands can lead to increased risk of work-related MSDs. The article will also explain technological solutions that can be implemented to reduce the risk of work-related MSDs for healthcare workers.

Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review.

Science.gov (United States)

Hermawati, Setia; Lawson, Glyn; Sutarto, Auditya Purwandini

2014-01-01

In industrially developing countries (IDC), small and medium enterprises (SMEs) account for the highest proprotion of employment. Unfortunately, the working conditions in SMEs are often very poor and expose employees to a potentially wide range of health and safety risks. This paper presents a comprehensive review of 161 articles related to ergonomics application in SMEs, using Indonesia as a case study. The aim of this paper is to investigate the extent of ergonomics application and identify areas that can be improved to promote effective ergonomics for SMEs in IDC. The most urgent issue found is the need for adopting participatory approach in contrast to the commonly implemented top-down approach. Some good practices in ergonomics application were also revealed from the review, e.g. a multidisciplinary approach, unsophisticated and low-cost solutions, and recognising the importance of productivity. The review also found that more work is still required to achieve appropriate cross-cultural adaptation of ergonomics application.

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

Science.gov (United States)

Andersen, Simone Nyholm; Broberg, Ole

2015-11-01

Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Integrating ergonomics in design processes: a case study within an engineering consultancy firm

DEFF Research Database (Denmark)

Sørensen, Lene Bjerg; Broberg, Ole

2012-01-01

ergonomics into engineering design processes and how different factors either promote or limit the integration. Based on a grounded theory approach a model illustrating these factors is developed and different hypotheses about how these factors either promote and/or limit the integration of ergonomics...

Seat pan and backrest pressure distribution while sitting in office chairs.

Science.gov (United States)

Zemp, Roland; Taylor, William R; Lorenzetti, Silvio

2016-03-01

Nowadays, an increasing amount of time is spent seated, especially in office environments, where sitting comfort and support are increasingly important due to the prevalence of musculoskeletal disorders. The aim of this study was to develop a methodology for chair-specific sensor mat calibration, to evaluate the interconnections between specific pressure parameters and to establish those that are most meaningful and significant in order to differentiate pressure distribution measures between office chairs. The shape of the exponential calibration function was highly influenced by the material properties and geometry of the office chairs, and therefore a chair-specific calibration proved to be essential. High correlations were observed between the eight analysed pressure parameters, whereby the pressure parameters could be reduced to a set of four and three parameters for the seat pan and the backrest respectively. In order to find significant differences between office chairs, gradient parameters should be analysed for the seat pan, whereas for the backrest almost all parameters are suitable. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review

Directory of Open Access Journals (Sweden)

Simone De Sio

2018-01-01

Full Text Available Introduction Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54–93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. Methods This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Results Online research indicated 4188 references: PubMed (2919, Scopus (1257 e Cochrane Library (12. We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review.

Science.gov (United States)

De Sio, Simone; Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54-93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Online research indicated 4188 references: PubMed (2919), Scopus (1257) e Cochrane Library (12). We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each working session and at the end of the working day

Workstation Analysis, Ergonomic Style: Don't Despair, Teaching Ergonomic Workstation Analysis Isn't That Tough; but You Need a Plan.

Science.gov (United States)

Merrell, Wayne L.; Zeimet, Denis E.

1994-01-01

Lists 15 principles for working safely with equipment. Describes phases of an ergonomic hazards program to identify and prevent problems and causes of cumulative trauma disorders in the workplace. (SK)

Cultural ergonomics in interactional and experiential design: conceptual framework and case study of the Taiwanese twin cup.

Science.gov (United States)

Lin, Chih-Long; Chen, Si-Jing; Hsiao, Wen-Hsin; Lin, Rungtai

2016-01-01

Cultural ergonomics is an approach that considers interaction- and experience-based variations among cultures. Designers need to develop a better understanding of cultural ergonomics not just to participate in cultural contexts but also to develop interactive experiences for users. Cultural ergonomics extends our understanding of cultural meaning and our ability to utilize such understanding for design and evaluate everyday products. This study aims to combine cultural ergonomics and interactive design to explore human-culture interaction in user experiences. The linnak is a typical Taiwanese aboriginal cultural object. This study examined the cultural meaning and operational interface of the linnak, as well as the scenarios in which it is used in interaction and user experiences. The results produced a cultural ergonomics interface for examining the manner in which designers communicate across cultures as well as the interweaving of design and culture in the design process. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Kaizen and ergonomics: the perfect marriage.

Science.gov (United States)

Rodriguez, Martin Antonio; Lopez, Luis Fernando

2012-01-01

This paper is an approach of how Kaizen (Continuous Improvement) and Ergonomics could be implemented in the field of work. The Toyota's Team Members are the owners of this job, applying tools and techniques to improve work conditions using the Kaizen Philosophy in a QCC Activity (Quality Control Circle).

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

Science.gov (United States)

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Field quantification of physical exposures of police officers in vehicle operation.

Science.gov (United States)

McKinnon, Colin D; Callaghan, Jack P; Dickerson, Clark R

2011-01-01

Mobile police officers perform many of their daily duties in their vehicles. Combined workspace inflexibility and prolonged driving create potential musculoskeletal injury risks. Limited research exists that quantitatively describes postural and load exposures associated with mobile police work. The purpose of this study was to characterize officer activity during a typical workday and identify opportunities for ergonomic intervention. Digital video of traffic officers (N = 10) was used to classify postures according to work activity. Cumulative time in 10 activities was calculated, and a time-history of driver activity documented. Most (55.5 ± 13.4%) time was out of the vehicle, and 22.3 ± 10.5% was spent in single-arm driving. On paper documentation and mobile data terminal use were identified as in-car activities that may benefit from targeted interventions. The primary contribution of this study is characterization of daily mobile police activity and the identification of possible intervention strategies to mitigate physical exposure levels.

Sobre la relación entre la ergonomía y psicología cognitivas

OpenAIRE

Salmerón González, Ladislao; Fajardo Bravo, Inmaculada; Cañas, José J.

2004-01-01

This study describes the,field of cognitive ergonomics and discussesthe relation between this discipline and cognitive psychology. We argue against the view commonly held by scientists that cognitive ergonomics is merely the applied science of cognitive psychology and describe studies that support the role of cognitive ergonomics as a basic science. Finally, we propose a conceptual framework for the work of the cognitive ergonomist, in order to promote joint research projects involving cognit...

Ergonomics in nuclear and human factors engineering

International Nuclear Information System (INIS)

Muench, E.; Schultheiss, G.F.

1988-01-01

The work situation including man-machine-relationships in nuclear power plants is described. The overview gives only a compact summary of some important ergonomic parameters, i.e. human body dimension, human load, human characteristics and human knowledge. (DG)

Ergonomics perspective for identifying and reducing internal operative flow disruption for laparoscopic urological surgery.

Science.gov (United States)

Al-Hakim, Latif; Xiao, Jiaquan; Sengupta, Shomik

2017-12-01

The aim of this study is to examine operative flow disruption that occurs inside the surgical field, (internal operative flow disruption (OFD)), during urological laparoscopies, and to relate those events to external ergonomics environment in terms of monitor location, level of instruments' handles, and location of surgical team members. According to the our best knowledge, this is the first study of its kind. A combination of real and video-aided observational study was conducted in the operating rooms at hospitals in Australia and China. Brain storming sessions were first conducted to identify the main internal OFD events, and the observable reasons, potential external, and latent ergonomic factors were listed. A prospective observational study was then conducted. The observer's records and the related video records of internal surgical fields were analysed. Procedures were categorised into groups based on similarity in ergonomics environment. The mapping process revealed 39 types of internal OFD events resulted from six reasons. A total of 24 procedures were selected and arranged into two groups, each with twelve procedures. Group A was carried out under satisfactory ergonomics environment, while Group B was conducted under unsatisfactory ergonomics environment. A total of 1178 OFD events were detected delaying the total observed operative times (2966 min) by 220 min (7.43%). Average OFD/h in group A was less than 15, while in group B about 29 OFD/h. There are two main latent ergonomics factors affecting the surgeon's performance; non-physiological posture and long-period static posture. The delays and number of internal OFD were nearly doubled where procedures were conducted under unsatisfactory external ergonomics environment. Some events such as stopping operation and irrelevant conversations during long procedures may have a positive influence on the surgeon's performance.

Ergonomics in gynecologists' daily practice: A nationwide survey in The Netherlands.

Science.gov (United States)

Alleblas, Chantal C J; Formanoy, Margriet A G; Könemann, Reinier; Radder, Celine M; Huirne, Judith A; Nieboer, Theodoor E

2016-01-01

Gynecologists are exposed to multiple risk factors for developing physical complaints. To enhance the workplace ergonomics in gynecological practice, a more detailed insight about job content and associated demands is necessary to subsequently decrease the exposure to risk factors. The aim of this study was to investigate the prevalence of physical complaints and the presence of ergonomic constraints in Dutch gynecological practice. A questionnaire was distributed among the 1200 members of the Dutch Society of Obstetrics and Gynecology. It consisted of 52 Dutch questions derived from the validated Dutch Musculoskeletal Questionnaire. A total of 227 respondents completed the questionnaire (response rate 18.9%). Overall, 99.5% of the respondents rated their health status as reasonable or good. However, the twelve-month prevalence of physical complaints in one or more body part was 89.4%. Sustained adverse body postures were particularly reported for performing abdominal, and endoscopic surgery, and for assisting in vaginal surgery. Limited workspace, instruments, and patient size were reported by more than 60% of the respondents as constraints for adopting a neutral body posture during vaginal, endoscopic and abdominal surgery respectively. The results emphasize the necessity of enhancing ergonomics in gynecological practice. Better ergonomic circumstances will most likely benefit both the health of the gynecologists as well as the quality of surgical care.

Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery.

Science.gov (United States)

Sancibrian, Ramon; Gutierrez-Diez, María C; Torre-Ferrero, Carlos; Benito-Gonzalez, Maria A; Redondo-Figuero, Carlos; Manuel-Palazuelos, Jose C

2014-05-01

Laparoscopic surgery techniques have been demonstrated to provide massive benefits to patients. However, surgeons are subjected to hardworking conditions because of the poor ergonomic design of the instruments. In this article, a new ergonomic handle design is presented. This handle is designed using ergonomic principles, trying to provide both more intuitive manipulation of the instrument and a shape that reduces the high-pressure zones in the contact with the surgeon's hand. The ergonomic characteristics of the new handle were evaluated using objective and subjective studies. The experimental evaluation was performed using 28 volunteers by means of the comparison of the new handle with the ring-handle (RH) concept in an instrument available on the market. The volunteers' muscle activation and motions of the hand, wrist, and arm were studied while they performed different tasks. The data measured in the experiment include electromyography and goniometry values. The results obtained from the subjective analysis reveal that most volunteers (64%) preferred the new prototype to the RH, reporting less pain and less difficulty to complete the tasks. The results from the objective study reveal that the hyperflexion of the wrist required for the manipulation of the instrument is strongly reduced. The new ergonomic handle not only provides important ergonomic advantages but also improves the efficiency when completing the tasks. Compared with RH instruments, the new prototype reduced the high-pressure areas and the extreme motions of the wrist. Copyright © 2014 Elsevier Inc. All rights reserved.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial

Science.gov (United States)

2014-01-01

Background More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. Methods/Design The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. Discussion The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance

Colour, vision and ergonomics.

Science.gov (United States)

Pinheiro, Cristina; da Silva, Fernando Moreira

2012-01-01

This paper is based on a research project - Visual Communication and Inclusive Design-Colour, Legibility and Aged Vision, developed at the Faculty of Architecture of Lisbon. The research has the aim of determining specific design principles to be applied to visual communication design (printed) objects, in order to be easily read and perceived by all. This study target group was composed by a selection of socially active individuals, between 55 and 80 years, and we used cultural events posters as objects of study and observation. The main objective is to overlap the study of areas such as colour, vision, older people's colour vision, ergonomics, chromatic contrasts, typography and legibility. In the end we will produce a manual with guidelines and information to apply scientific knowledge into the communication design projectual practice. Within the normal aging process, visual functions gradually decline; the quality of vision worsens, colour vision and contrast sensitivity are also affected. As people's needs change along with age, design should help people and communities, and improve life quality in the present. Applying principles of visually accessible design and ergonomics, the printed design objects, (or interior spaces, urban environments, products, signage and all kinds of visually information) will be effective, easier on everyone's eyes not only for visually impaired people but also for all of us as we age.

Positive outcomes of participatory ergonomics in terms of greater comfort and higher productivity

NARCIS (Netherlands)

Vink, P.; Koningsveld, E.A.P.; Molenbroek, J.F.

2006-01-01

Ergonomics sometimes has a negative connotation, as it is seen to be connected to illness or guidelines that limit innovations. This paper is focused on the positive aspects of ergonomics in improvement of the working environment. It consists of a part that studies the literature on success factors

Multifunctional. Glass system walls optimize acoustics, lighting and room climate in open offices; Multifunktional. Glas-Systemwaende optimieren Akustik, Beleuchtung und Klima in offenen Buerolandschaften

Energy Technology Data Exchange (ETDEWEB)

Fuchs, H.V. [Fraunhofer-Institut fuer Bauphysik (IBP), Stuttgart (Germany); Renz, J. [renz solutions GmbH, Aidlingen (Germany)

2008-05-15

Acoustics, light and climate are determining factors of thermal comfort in multiple office buildings. Internal structural elements used to take over these ergonomic functions until now; now, all three aspects can be integrated completely and at low cost in new types of glass wall systems. (orig.)

Awareness and Knowledge of Ergonomics Among Medical ...

African Journals Online (AJOL)

with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% ... contribute to achievement of organizational goals.[3] Improving .... poor culture of application of ergonomics by participants as knowledge of benefit of ...

Ergonomics SA publishing requirements and submission guidelines

African Journals Online (AJOL)

rhodes

This study assessed the ergonomic risk factors, and occupational health and ... health hazards such as increased mortality, dermal contamination, depression in cholinesterase level, fetal abnormalities spontaneous abortion among pregnant women ..... Another study in China showed the correlation between pesticide in ...

A model for assessing the degree of importance of ergonomics criteria to human machine interface

Energy Technology Data Exchange (ETDEWEB)

Araujo, Cesar Ribeiro de; Domech More, Jesus [Universidade Estacio de Sa do Rio de Janeiro, RJ (Brazil). Mestrado em Desenvolvimento Empresarial - MADE]. E-mail: cesararaujobr@yahoo.com.br; jesus.more@estacio.br; Silva, Aretha Felix Thomaz da [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Civil. Sistemas Computacionais Orientados a Industria do Petroleo]. E-mail: aretha@coc.ufrj.br

2007-07-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

A model for assessing the degree of importance of ergonomics criteria to human machine interface

International Nuclear Information System (INIS)

Araujo, Cesar Ribeiro de; Domech More, Jesus; Silva, Aretha Felix Thomaz da

2007-01-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

PHYSICAL WORKLOAD AS A RISK FACTOR FOR SYMPTOMS IN THE NECK AND UPPER LIMBS: EXPOSURE ASSESSMENT AND ERGONOMIC INTERVENTION

Directory of Open Access Journals (Sweden)

Ritva Ketola

2004-06-01

Full Text Available The aims of this study were to investigate work related and individual factors as predictors of insident neck pain among video display unit (VDU workers, to assess the effects of an ergonomic intervention and education on musculoskeletal symptoms, and to study the repeatability and validity of an expert assessment method of VDU workstation ergonomics. A method to assess the risk factors for upper limb disorders was developed, and its validity and repeatability were studied. The annual incidence of neck pain was 34.4%. A poor physical work environment and placement of the keyboard were work-related factors increasing the risk of neck pain. Among the individual factors, female sex was a strong predictor. The randomized intervention study included questionnaire survey, a diary of discomfort, and ergonomic rating of the workstations. The subjects (n=124 were allocated into three groups. The intensive and the education groups had less musculoskeletal discomfort than the control group at the 2-month follow-up. After the intervention, the level of ergonomics was distinctly higher in the intensive ergonomic group than in the education or control group. Two experts in ergonomics analyzed and rated the ergonomics of workstations before and after intervention. The validity of the assessment method was rated against the technical measurements, assessment of tidiness and space, and work chair ergonomics. The intraclass correlation coefficient between ratings of the two experts was 0.74. Changes in the location of the input devises and the screen, as well as the values of tidiness and space and work chair ergonomics showed a significant association with the ratings of both experts. The method to assess the loads imposed on the upper limbs was validated against the expert observations from the video, continuous recordings of myoelectric activity of forearm muscles, and wrist posture, measured with goniometers. Inter-observer repeatability and validity were

Ergonomic Analysis of Tricycle Sidecar Seats: Basis for Proposed Standard Design

Directory of Open Access Journals (Sweden)

Michael C. Godoy

2015-12-01

Full Text Available Ergonomics (also called human factors engineering is the study of human characteristics for the appropriate design of the living and work environment. It is applied in various industrial areas which includes transportation.Tricycle being one of the most common means of public transportation in Lipa City has various adaptations to suit the culture, and environment. The purpose of this study is to analyze the variability in design of the tricycles in Lipa City, Philippines and propose a standard ergonomically designed tricycle sidecar seat for a greater population. The study was conducted at 26 tricycle terminals with 232 tricycle samples within Lipa City proper including the public market area where 400 commuters were given questionnaires to determine the risk factors associated with the existing tricycle sidecar seat design. Anthropometric measurements of 100 males and 100 female commuters were obtained together with the sidecar dimensions of 232 tricycles to substantiate the observed variations in design. Using the design for the average and design for the extremes, it was found out that most of the tricycles in Lipa City, Philippines have inappropriate inclined seat and lowered sidecar seat pan height which can result to leg and abdominal pain; narrowed seat pan depth which caused pressure on buttocks and legs; narrowed backrest width which can cause upper and low back pain; low backrest height that can pose upper back pain; which can also result to abdominal pain; inclined backrest and limited vertical clearance which can cause upper back pain and neck pain. The researcher proposed a sidecar seat design standard which can be used by the Land Transportation Office, and Land Transportation Franchising and Regulatory Board to provide ease, comfort, and convenience to the passengers.

The Influence of Ergonomics Training on Employee Behavior at Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Puckett, Leslie Guthrie [Colorado State Univ., Fort Collins, CO (United States)

2001-01-01

A survey of employee behavior was conducted at Los Alamos National Laboratory (LANL). The objective of this study was to evaluate the prevalence of ergonomic behavior that decreased the chance of having a work-related musculoskeletal disorder (WMSD) among employees. The null hypothesis was tested to determine if there was a significant difference in ergonomic behavior between trained and untrained employees. The LANL employees were stratified by job series and then randomly selected to participate. The data were gathered using an electronic self-administered behavior questionnaire. The study population was composed of 6931 employees, and the response rate was 48%. The null hypothesis was rejected for twelve out of fifteen questions on the questionnaire. Logistic regression results indicate that the trained participants were more likely to report the risk-avoiding behavior, which supported the rejection of the null hypothesis for 60% of the questions. There was a higher frequency that the beneficial or risk-avoiding behavior was reported by the uninjured participants. Job series analysis revealed that ergonomics is an important issue among participants from all the job series. It also identified the occupational specialist classification (an administrative job), as the job series with the most occurrences of undesired ergonomic behaviors. In conclusion, there was a significant difference between the trained and untrained participants of the beneficial ergonomic behavior in the reported risk reducing behaviors.

Assessing ergonomic risks of software: Development of the SEAT.

Science.gov (United States)

Peres, S Camille; Mehta, Ranjana K; Ritchey, Paul

2017-03-01

Software utilizing interaction designs that require extensive dragging or clicking of icons may increase users' risks for upper extremity cumulative trauma disorders. The purpose of this research is to develop a Self-report Ergonomic Assessment Tool (SEAT) for assessing the risks of software interaction designs and facilitate mitigation of those risks. A 28-item self-report measure was developed by combining and modifying items from existing industrial ergonomic tools. Data were collected from 166 participants after they completed four different tasks that varied by method of input (touch or keyboard and mouse) and type of task (selecting or typing). Principal component analysis found distinct factors associated with stress (i.e., demands) and strain (i.e., response). Repeated measures analyses of variance showed that participants could discriminate the different strain induced by the input methods and tasks. However, participants' ability to discriminate between the stressors associated with that strain was mixed. Further validation of the SEAT is necessary but these results indicate that the SEAT may be a viable method of assessing ergonomics risks presented by software design. Copyright © 2016 Elsevier Ltd. All rights reserved.

Participatory ergonomics in design processes: The role of boundary objects

DEFF Research Database (Denmark)

Broberg, Ole; Andersen, Vibeke; Seim, Rikke

2011-01-01

The aim of this paper is to introduce the concept of boundary objects in order to better understand the role of objects in participatory ergonomics (PE) design processes. The research question is: What characterizes boundary objects in PE processes? Based on two case studies, we identify eight...... enable workers’ participation and collaborative design in different ways. The framework developed may serve to provide criteria to guide practitioners and intervention researchers in the selection of objects to facilitate a PE process. The paper concludes with a list of recommendations for ergonomic...

Ergonomic Chair Explorative Intervention Study: Effect on Chronic ...

African Journals Online (AJOL)

Ergonomic Chair Explorative Intervention Study: Effect on Chronic Upper ... they are associated with a complex relationship between individual, work-related and ... in chronic upper quadrant musculoskeletal dysfunction and work productivity ...

Software Support of Modelling using Ergonomic Tools in Engineering

Directory of Open Access Journals (Sweden)

Darina Dupláková

2017-08-01

Full Text Available One of the preconditions for correct development of industrial production is continuous interconnecting of virtual reality and real world by computer software. Computer software are used for product modelling, creation of technical documentation, scheduling, management and optimization of manufacturing processes, and efficiency increase of human work in manufacturing plants. This article describes the frequent used ergonomic software which helping to increase of human work by error rate reducing, risks factors of working environment, injury in workplaces and elimination of arising occupational diseases. They are categorized in the field of micro ergonomics and they are applicable at the manufacturing level with flexible approach in solving of established problems.

Colossal Tooling Design: 3D Simulation for Ergonomic Analysis

Science.gov (United States)

Hunter, Steve L.; Dischinger, Charles; Thomas, Robert E.; Babai, Majid

2003-01-01

The application of high-level 3D simulation software to the design phase of colossal mandrel tooling for composite aerospace fuel tanks was accomplished to discover and resolve safety and human engineering problems. The analyses were conducted to determine safety, ergonomic and human engineering aspects of the disassembly process of the fuel tank composite shell mandrel. Three-dimensional graphics high-level software, incorporating various ergonomic analysis algorithms, was utilized to determine if the process was within safety and health boundaries for the workers carrying out these tasks. In addition, the graphical software was extremely helpful in the identification of material handling equipment and devices for the mandrel tooling assembly/disassembly process.

Effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders among computer workers: a randomized controlled trial.

Science.gov (United States)

Esmaeilzadeh, Sina; Ozcan, Emel; Capan, Nalan

2014-01-01

The aim of the study was to determine effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders (WUEMSDs) among computer workers. Four hundred computer workers answered a questionnaire on work-related upper extremity musculoskeletal symptoms (WUEMSS). Ninety-four subjects with WUEMSS using computers at least 3 h a day participated in a prospective, randomized controlled 6-month intervention. Body posture and workstation layouts were assessed by the Ergonomic Questionnaire. We used the Visual Analogue Scale to assess the intensity of WUEMSS. The Upper Extremity Function Scale was used to evaluate functional limitations at the neck and upper extremities. Health-related quality of life was assessed with the Short Form-36. After baseline assessment, those in the intervention group participated in a multicomponent ergonomic intervention program including a comprehensive ergonomic training consisting of two interactive sessions, an ergonomic training brochure, and workplace visits with workstation adjustments. Follow-up assessment was conducted after 6 months. In the intervention group, body posture (p 0.05). Ergonomic intervention programs may be effective in reducing ergonomic risk factors among computer workers and consequently in the secondary prevention of WUEMSDs.

An electrochemical study of the flow rate effect on the oxide film of SA106 Gr.C piping

International Nuclear Information System (INIS)

Hong, S. M.; Kim, J. H.; Kim, I. S.

2002-01-01

Effect of water flow rate on the oxide film of SA106 Gr.C piping was evaluated quantitatively through electrochemical method. It was carried out with weight change experiments, polarization tests, and EIS tests with rig that simulates water flow. Without water flow, the oxide film is so stable that it effectively blocks current exchange. With water flow, the oxide film was damaged and electrochemical current density and oxide film properties, C dl and R p were significantly changed

Visual ergonomics and computer work--is it all about computer glasses?

Science.gov (United States)

Jonsson, Christina

2012-01-01

The Swedish Provisions on Work with Display Screen Equipment and the EU Directive on the minimum safety and health requirements for work with display screen equipment cover several important visual ergonomics aspects. But a review of cases and questions to the Swedish Work Environment Authority clearly shows that most attention is given to the demands for eyesight tests and special computer glasses. Other important visual ergonomics factors are at risk of being neglected. Today computers are used everywhere, both at work and at home. Computers can be laptops, PDA's, tablet computers, smart phones, etc. The demands on eyesight tests and computer glasses still apply but the visual demands and the visual ergonomics conditions are quite different compared to the use of a stationary computer. Based on this review, we raise the question if the demand on the employer to provide the employees with computer glasses is outdated.

The impact of ergonomic work environment exposures on the risk of disability pension: Prospective results from DWECS/DREAM.

Science.gov (United States)

Labriola, Merete; Feveile, Helene; Christensen, Karl B; Strøyer, Jesper; Lund, Thomas

2009-11-01

The objectives were to identify the impact of ergonomic work environment exposures on the risk of disability pension. A representative sample of 8475 employees of the total working population in Denmark were interviewed regarding work environment exposures and followed in a national register with data on granted disability pension. For women, approximately 34% of the disability pension cases were attributable to ergonomic work environment exposures. For men, 21% of the disability pension cases were attributable to ergonomic work environment. Ergonomic work environment, especially physically demanding work, working with hands lifted and repetitive work, are areas of intervention at the workplace that can facilitate and prolong labour market participation. The study provides estimates for the association between ergonomic exposures at work and administrative, cost-related measures of work disability in a large population-based longitudinal cohort study over 14 years. Approximately 21% for men and 34% for women of the disability pension cases were attributable to ergonomic work environment exposures.

Ergonomics SA - Vol 21, No 1 (2009)

African Journals Online (AJOL)

Ergonomics study on Musculoskeletal Disorders among female agricultural workers of West Bengal, India · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. S Gangopadhyay, B Das, T Das, G Ghoshal, T Ghosh, T Ara, S Dev, 11-22 ...

Ergonomic aspects of automation in navigation bridges

NARCIS (Netherlands)

Lazet, A.; Walraven, P.L.

1971-01-01

New ergonomic questions arise from the tendency toward increasing automation in maritime operations. Direct control of engines and rudder from the bridge promises improved ship control, provided that the operator can really exploit the technical improvements. To make such direct control most

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome

DEFF Research Database (Denmark)

Andersen, Simone Nyholm; Broberg, Ole

2015-01-01

of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models’ high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity......Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full......-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups’ high fidelity of room layout and affordance...

Processes, barriers and facilitators to implementation of a participatory ergonomics program among eldercare workers

DEFF Research Database (Denmark)

Rasmussen, Charlotte Diana Nørregaard; Lindberg, Naja Klærke; Ravn, Marie Højbjerg

2017-01-01

This study aimed to investigate the processes of a participatory ergonomics program among 594 eldercare workers with emphasis on identified risk factors for low back pain and solutions, and reveal barriers and facilitators for implementation. Sixty-nine per cent of the identified risk factors wer......, workplaces, health and safety professionals, and researchers to improve future participatory ergonomics programs....... physical ergonomic, 24% were organisational and 7% were psychosocial risk factors. Most solutions were organisational (55%), followed by physical (43%) and psychosocial solutions (2%). Internal factors (e.g. team or management) constituted 47% of the barriers and 75% of the facilitators. External factors...

The explanatory power of Schema Theory: theoretical foundations and future applications in Ergonomics.

Science.gov (United States)

Plant, Katherine L; Stanton, Neville A

2013-01-01

Schema Theory is intuitively appealing although it has not always received positive press; critics of the approach argue that the concept is too ambiguous and vague and there are inherent difficulties associated with measuring schemata. As such, the term schema can be met with scepticism and wariness. The purpose of this paper is to address the criticisms that have been levelled at Schema Theory by demonstrating how Schema Theory has been utilised in Ergonomics research, particularly in the key areas of situation awareness, naturalistic decision making and error. The future of Schema Theory is also discussed in light of its potential roles as a unifying theory in Ergonomics and in contributing to our understanding of distributed cognition. We conclude that Schema Theory has made a positive contribution to Ergonomics and with continued refinement of methods to infer and represent schemata it is likely that this trend will continue. This paper reviews the contribution that Schema Theory has made to Ergonomics research. The criticisms of the theory are addressed using examples from the areas of situation awareness, decision making and error.

"Alarm-corrected" ergonomic armrest use could improve learning curves of novices on robotic simulator.

Science.gov (United States)

Yang, Kun; Perez, Manuela; Hossu, Gabriela; Hubert, Nicolas; Perrenot, Cyril; Hubert, Jacques

2017-01-01

In robotic surgery, the professional ergonomic habit of using an armrest reduces operator fatigue and increases the precision of motion. We designed and validated a pressure surveillance system (PSS) based on force sensors to investigate armrest use. The objective was to evaluate whether adding an alarm to the PSS system could shorten ergonomic training and improve performance. Twenty robot and simulator-naïve participants were recruited and randomized in two groups (A and B). The PSS was installed on a robotic simulator, the dV-Trainer, to detect contact with the armrest. The Group A members completed three tasks on the dV-Trainer without the alarm, making 15 attempts at each task. The Group B members practiced the first two tasks with the alarm and then completed the final tasks without the alarm. The simulator provided an overall score reflecting the trainees' performance. We used the new concept of an "armrest load" score to describe the ergonomic habit of using the armrest. Group B had a significantly higher performance score (p ergonomic errors and accelerated professional ergonomic habit acquisition. The combination of the PSS and alarm is effective in significantly shortening the learning curve in the robotic training process.

Aircraft Cockpit Ergonomic Layout Evaluation Based on Uncertain Linguistic Multiattribute Decision Making

Directory of Open Access Journals (Sweden)

Junxuan Chen

2014-03-01

Full Text Available In the view of the current cockpit information interaction, facilities and other characteristics are increasingly multifarious; the early layout evaluation methods based on single or partial components, often cause comprehensive evaluation unilateral, leading to the problems of long development period and low efficiency. Considering the fuzziness of ergonomic evaluation and diversity of evaluation information attributes, we refine and build an evaluation system based on the characteristics of the current cockpit man-machine layout and introduce the different types of uncertain linguistic multiple attribute combination decision making (DTULDM method in the cockpit layout evaluation process. Meanwhile, we also establish an aircraft cockpit ergonomic layout evaluation model. Finally, an experiment about cockpit layout evaluation is given, and the result demonstrates that the proposed method about cockpit ergonomic layout evaluation is feasible and effective.

The impact of ergonomic work environment exposures on the risk of disability pension: Prospective results from DWECS/DREAM

DEFF Research Database (Denmark)

Labriola, Merete; Feveile, Helene; Christensen, Karl B

2009-01-01

The objectives were to identify the impact of ergonomic work environment exposures on the risk of disability pension. A representative sample of 8475 employees of the total working population in Denmark were interviewed regarding work environment exposures and followed in a national register...... with data on granted disability pension. For women, approximately 34% of the disability pension cases were attributable to ergonomic work environment exposures. For men, 21% of the disability pension cases were attributable to ergonomic work environment. Ergonomic work environment, especially physically...... demanding work, working with hands lifted and repetitive work, are areas of intervention at the workplace that can facilitate and prolong labour market participation. The study provides estimates for the association between ergonomic exposures at work and administrative, cost-related measures of work...

The influence of architectural designers on construction ergonomics ...

African Journals Online (AJOL)

, the construction process generates a disproportionate number of fatalities, injuries and disease and both the direct and indirect costs contribute to the cumulative cost of construction. Designers influence construction ergonomics directly and ...

Ergonomic Interventions in Manual Handling of Carpets to the retail sellers in a textile company

Directory of Open Access Journals (Sweden)

E. Darvishi

2015-04-01

.Conclusion: By implementing ergonomics interventions in carpet delivery sites, the risk factors of MSDs, induced by manual carpet handling, were reduced and safety and ergonomic conditions of the retailers were improved, compared to the previous conditions.

Ergonomics of disposable handles for minimally invasive surgery.

Science.gov (United States)

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

Toward improved construction health, safety, and ergonomics in ...

African Journals Online (AJOL)

involved in architectural CPD programmes take 'upstream design ownership' and use the model as a ... health and safety (H&S), inclusive of construction ergonomics, the responsibility for ...... Santiago, Chile, 18-20 January. Rotterdam: CIB ...

The Process of Participatory Ergonomics Simulation in Hospital Work System Design

OpenAIRE

Andersen, Simone Nyholm

2016-01-01

Participatory ergonomics simulation (PES) is a method to involve workers in simulation and design of their own future work system. Understanding of the process of PES is crucial in order to plan and facilitate the process towards creating an ergonomics work system design supporting both human well-being and overall system performance. With outset in two cases of PES in hospital work system design, this study investigates the elements of the PES process and their interrelations. The aim is to ...

AORN Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings.

Science.gov (United States)

Hughes, Nancy L; Nelson, Audrey; Matz, Mary W; Lloyd, John

2011-06-01

Prolonged standing during surgical procedures poses a high risk of causing musculoskeletal disorders, including back, leg, and foot pain, which can be chronic or acute in nature. Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings provides recommendations for relieving the strain of prolonged standing, including the use of antifatigue mats, supportive footwear, and sit/stand stools, that are based on well-accepted ergonomic safety concepts, current research, and access to new and emerging technology. Published by Elsevier Inc.

Processes, barriers and facilitators to implementation of a participatory ergonomics program among eldercare workers.

Science.gov (United States)

Rasmussen, Charlotte Diana Nørregaard; Lindberg, Naja Klærke; Ravn, Marie Højbjerg; Jørgensen, Marie Birk; Søgaard, Karen; Holtermann, Andreas

2017-01-01

This study aimed to investigate the processes of a participatory ergonomics program among 594 eldercare workers with emphasis on identified risk factors for low back pain and solutions, and reveal barriers and facilitators for implementation. Sixty-nine per cent of the identified risk factors were physical ergonomic, 24% were organisational and 7% were psychosocial risk factors. Most solutions were organisational (55%), followed by physical (43%) and psychosocial solutions (2%). Internal factors (e.g. team or management) constituted 47% of the barriers and 75% of the facilitators. External factors (e.g. time, financial resources, collaboration with resident or relatives) constituted 53% of the barriers and 25% of the facilitators. This study revealed the processes and implementation of a participatory ergonomics program among eldercare workers. The findings can be transferred to workers, workplaces, health and safety professionals, and researchers to improve future participatory ergonomics programs. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Reduction of work-related musculoskeletal risk factors following ergonomics education of sewing machine operators.

Science.gov (United States)

Bulduk, Sıdıka; Bulduk, Emre Özgür; Süren, Tufan

2017-09-01

Work-related musculoskeletal disorders (WMSDs) are a major hazard for sewing machine operators. Ergonomics education is recommended for reducing musculoskeletal disorders at workstations. This study aimed to evaluate the effect of an ergonomics education in reducing the exposure to risk factors for WMSDs among sewing machine operators. In this study of 278 workers, their exposure to the risk of WMSDs was assessed using the quick exposure check scale prior to them attending an ergonomics education programme and then again 3 months after the programme. The scores for risk exposure before the education programme were moderate for back (static) and back (dynamic), high for shoulder/arm and very high for wrist/hand and neck. The results obtained 3 months later were low for back (static) and shoulder/arm, and moderate for back (dynamic), wrist/hand and neck. Based on our results, ergonomics education can reduce the exposure to risk factors for WMSDs in the workplace.

A method for Effect Modifier Assessment in ergonomic intervention research – The EMA method

DEFF Research Database (Denmark)

Edwards, Kasper; Winkel, Jørgen

2016-01-01

Introduction: Ergonomic intervention research includes studies in which researchers arrange (or follow) changes in working conditions to determine the effects in risk factors and/or health. Often this research takes place at workplaces and not in a controlled environment of a laboratory. The effe......Introduction: Ergonomic intervention research includes studies in which researchers arrange (or follow) changes in working conditions to determine the effects in risk factors and/or health. Often this research takes place at workplaces and not in a controlled environment of a laboratory...... of the literature revealed lack of or poor consideration of effect modifiers in ergonomic intervention research. We present a method that has been developed over the course of several years parallel to intervention studies in healthcare. Material and methods: The EMA method is a type of group interview including 3...... sources. Conclusion: The EMA method seems to offer a feasible procedure to obtain significant knowledge on potential effect modifiers in ergonomic intervention research. However, further development and validation is suggested....

Ergonomics on the Build Colombian Health of Workers

Directory of Open Access Journals (Sweden)

Jairo Ernesto Luna García

2014-06-01

Full Text Available The health of workers in Colombia traverses multiple challenges and difficulties, starting from the national, political and economic context, crossroads living social security system and the trends in the world of work. Faced with this situation, the ergonomics as a field of knowledge and action has multiple possibilities of contribution, which depend on not to see this disciplined reduced to a technical dimension, but encourage their contribution within a framework of action located and contextualized. Although it has emphasized the action of ergonomics in its contribu-tion to the prevention of muscle-skeletal disorders, their contribution to the health of workers can be very important, in a setting of search of the labor and social welfare as a complement to the prevention of occupational risks.

Ergonomic interventions for improving working postures associated with manual materials handling (case study: a mineral processing plant

Directory of Open Access Journals (Sweden)

Fateme Dehghani

2016-12-01

Full Text Available Introduction: A high percentage of musculoskeletal disorders in workplaces occur due to awkward posture and non-ergonomic design of the work stations for lifting and carrying of materials. To avoid these injuries, jobs should be designed in a way that ergonomics risk factors are controlled properly. The aim of this study was to utilize ergonomics interventions to minimize ergonomics risk factors in bag packing unit in a mineral processing plant. Material and Method: This cross sectional study was carried out among 20 workers of bag packing unit. Camera recording of working postures, evaluation of medical records, interview, and REBA technique were used to identify the ergonomic risk factors. Interventions included changing the conveyor belt height and the use of spring pallets (spring table. Data were analyzed using Paired T-Test by SPSS software version 18. Result: Before implementing ergonomics intervention, a total of 75% of evaluated postures by REBA technique obtained score of 8-10 (very high risk level and 25% had score of 11-15 (very high risk level that correspond to the action level 3 and 4, respectively. Following the implementation of ergonomics interventions, a total of 90% of the analyzed postures showed action level 2 (moderate risk level and the remainder 10 percent of evaluated postures showed high risk level. Comparison of REBA technique scores before and after implementing interventions showed a significant difference (P-value < 0.05. Conclusion: Based on the findings of this study, the implementation of ergonomics interventions has remarkably decreased the required action level and it may be able to improve work-related postures.

Applying systems ergonomics methods in sport: A systematic review.

Science.gov (United States)

Hulme, Adam; Thompson, Jason; Plant, Katherine L; Read, Gemma J M; Mclean, Scott; Clacy, Amanda; Salmon, Paul M

2018-04-16

As sports systems become increasingly more complex, competitive, and technology-centric, there is a greater need for systems ergonomics methods to consider the performance, health, and safety of athletes in context with the wider settings in which they operate. Therefore, the purpose of this systematic review was to identify and critically evaluate studies which have applied a systems ergonomics research approach in the context of sports performance and injury management. Five databases (PubMed, Scopus, ScienceDirect, Web of Science, and SPORTDiscus) were searched for the dates 01 January 1990 to 01 August 2017, inclusive, for original peer-reviewed journal articles and conference papers. Reported analyses were underpinned by a recognised systems ergonomics method, and study aims were related to the optimisation of sports performance (e.g. communication, playing style, technique, tactics, or equipment), and/or the management of sports injury (i.e. identification, prevention, or treatment). A total of seven articles were identified. Two articles were focussed on understanding and optimising sports performance, whereas five examined sports injury management. The methods used were the Event Analysis of Systemic Teamwork, Cognitive Work Analysis (the Work Domain Analysis Abstraction Hierarchy), Rasmussen's Risk Management Framework, and the Systems Theoretic Accident Model and Processes method. The individual sport application was distance running, whereas the team sports contexts examined were cycling, football, Australian Football League, and rugby union. The included systems ergonomics applications were highly flexible, covering both amateur and elite sports contexts. The studies were rated as valuable, providing descriptions of injury controls and causation, the factors influencing injury management, the allocation of responsibilities for injury prevention, as well as the factors and their interactions underpinning sports performance. Implications and future

Optimization of healthcare supply chain in context of macro-ergonomics factors by a unique mathematical programming approach.

Science.gov (United States)

Azadeh, A; Motevali Haghighi, S; Gaeini, Z; Shabanpour, N

2016-07-01

This study presents an integrated approach for analyzing the impact of macro-ergonomics factors in healthcare supply chain (HCSC) by data envelopment analysis (DEA). The case of this study is the supply chain (SC) of a real hospital. Thus, healthcare standards and macro-ergonomics factors are considered to be modeled by the mathematical programming approach. Over 28 subsidiary SC divisions with parallel missions and objectives are evaluated by analyzing inputs and outputs through DEA. Each division in this HCSC is considered as decision making unit (DMU). This approach can analyze the impact of macro-ergonomics factors on supply chain management (SCM) in healthcare sector. Also, this method ranks the relevant performance efficiencies of each HCSC. In this study by using proposed method, the most effective macro-ergonomics factor on HCSC is identified as "teamwork" issue. Also, this study would help managers to identify the areas of weaknesses in their SCM system and set improvement target plan for the related SCM system in healthcare industry. To the best of our knowledge, this is the first study for macro-ergonomics optimization of HCSC. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Redesigning the work system of rubber industries based on total ergonomics and ergo-micmac integration

Science.gov (United States)

Setiawan, H.

2018-01-01

The factory capacity achievement and the bottleneck reduction of production process at wet-blanket workstations are influenced by the balance of life quality rates and worker’s productivity, along with the worker’s ability and limitations, tasks, organization and work environment. The life quality of workers is indicated by: the reduction of workload, and fatigue. Meanwhile, work productivity is measured by increasing production results per work shift. The optimization of the quality of life and productivity of workers is achieved by redesigning the system and workstations based on ergonomics integrating Total Ergonomics with Ergo-MicMac (Micro Ergonomics and Macro Ergonomics), which includes redesigning wet-blanket folding worktable, regulating the system pattern of working in pairs, giving official break time, giving extra nutritious intakes such as sweet tea and snack Pempek, giving personal protective equipments, and redesigning physical working environments.This study was an experimental study, with treatment by subject design involving 30 workers sampled at a workstation condition before and after Ergonomics based redesign. The findings and conclusions of the study were derived from the reduction of the workload by 16.06%, fatigue by 18.84% and the increase of production results per work shift by 20.29%.

Ergonomic Enhancement for Older Readers with Low Vision

Science.gov (United States)

Watson, Gale R.; Ramsey, Vincent; De l'Aune, William; Elk, Arona

2004-01-01

This study found that the provision of ergonomic workstations for 12 older persons with age-related macular degeneration who used low vision devices significantly increased the participants' reading speed and decreased their discomfort when reading.

Trapezius Muscle Activity in using Ordinary and Ergonomically Designed Dentistry Chairs

Directory of Open Access Journals (Sweden)

O Haddad

2012-03-01

Full Text Available Background: Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. Objective: We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. Methods: The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Results: Normalized EMG data showed significant reduction (p<0.05 in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Conclusion: Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

Economic evaluation of a participatory ergonomics intervention in a textile plant.

Science.gov (United States)

Tompa, Emile; Dolinschi, Roman; Natale, Julianne

2013-05-01

In this study we report on the economic evaluation of a participatory ergonomics process undertaken at a clothing manufacturer in Southwestern Ontario, Canada that employs approximately 300 workers. We undertake a cost-benefit analysis from the company perspective. Intervention costs amounted to $65,787 and intervention benefits $360,614 (2011 Canadian dollars). The net present value was $294,827, suggesting that the intervention was worth undertaking based on the costs and consequences over the measurement period spanning more than four years. Based on these costs and benefits, the benefit-to-cost ratio is 5.5. Overall, the findings from this study suggest that participatory ergonomics interventions can be cost beneficial from the company perspective. Even though the changes were typically low-cost and low-tech interventions implemented by the plant mechanics and maintenance personnel, benefits were realized on both the health and financial fronts. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Teaching ergonomics to nursing facility managers using computer-based instruction.

Science.gov (United States)

Harrington, Susan S; Walker, Bonnie L

2006-01-01

This study offers evidence that computer-based training is an effective tool for teaching nursing facility managers about ergonomics and increasing their awareness of potential problems. Study participants (N = 45) were randomly assigned into a treatment or control group. The treatment group completed the ergonomics training and a pre- and posttest. The control group completed the pre- and posttests without training. Treatment group participants improved significantly from 67% on the pretest to 91% on the posttest, a gain of 24%. Differences between mean scores for the control group were not significant for the total score or for any of the subtests.

15 CFR 2008.19 - Classification Review Committee.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Classification Review Committee. 2008.19 Section 2008.19 Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE REGULATIONS TO IMPLEMENT E.O. 12065; OFFICE OF THE UNITED...

Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers.

Science.gov (United States)

Vandergrift, Jonathan L; Gold, Judith E; Hanlon, Alexandra; Punnett, Laura

2012-01-01

To examine the association between ergonomic physical and psychosocial exposures and the risk of prevalent and incident low back pain (LBP) in a longitudinal cohort of automobile manufacturing workers. Ergonomic exposure intensity and LBP presence were determined through questionnaires at baseline (n=1181) and to workers in the same job 1 year later (n=505). Models were constructed using log-binomial regression with special attention to interactions between ergonomic exposures. Awkward back posture (prevalence ratio (PR) 1.12, 95% CI 1.07 to 1.17), hand force (PR 1.06, 95% CI 1.02 to 1.10), physical effort (PR 1.10, 95% CI 1.04 to 1.16) and whole body vibration (PR 1.04, 95% CI 1.01 to 1.08) were each associated cross-sectionally with LBP. Awkward back posture (RR 1.13, 95% CI 0.98 to 1.31) and hand force (RR 1.07, 95% CI 0.93 to 1.22) also predicted incident LBP, although estimates were statistically less precise. Neither job control, psychological demands, nor job strain was independently related to risk of incident LBP. Among participants reporting high physical ergonomic exposures and moderate to high job control, increasing job demands was associated with a reduced LBP risk (RR 0.72, 95% CI 0.52 to 1.00). Among participants reporting high physical exposures and low job control, psychological demands was associated with an increased LBP risk (RR 1.30, 95% CI 1.02 to 1.66). Psychosocial workplace interventions for LBP should prioritise jobs in which there are high physical ergonomic exposures. Future studies of LBP should examine the interactions between physical ergonomic risk factors.

OBJECTIFICATION OF ERGONOMIC ASSESSMENT OF THE PILOT OPERATION ON THE BASIS OF “PHOTOSHOP – TECHNOLOGY”

Directory of Open Access Journals (Sweden)

Volodymyr Gorbunov

2013-12-01

Full Text Available On the basis of information technology “Photoshop” the means of the objective ergonomic evaluation of the professional activity of pilot on piloting the plane has been developed. Procedural characteristics, peculiarities and objective criteria if his work on aviation equipment is ergonomically acceptable, as well as the order of revealing the ergonomic shortcomings of the arrangement of his working place that decrease the flight safety from the position of human factor have been determined

Ergonomics SA publishing requirements and submission guidelines

African Journals Online (AJOL)

rhodes

handling tasks of Indian nurses. Smaranika Goswami. M.Sc. Ergonomics and ... manual patient handling, nurses in India and other developing countries frequently experience awkward postures during work. ..... technique and availability of lifting devices was one of the reasons for WMSDs. Awkward postures were also a ...

Ergonomics SA - Vol 24, No 2 (2012)