WorldWideScience

Sample records for graphics system designed

  1. Computer graphics application in the engineering design integration system

    Science.gov (United States)

    Glatt, C. R.; Abel, R. W.; Hirsch, G. N.; Alford, G. E.; Colquitt, W. N.; Stewart, W. A.

    1975-01-01

    The computer graphics aspect of the Engineering Design Integration (EDIN) system and its application to design problems were discussed. Three basic types of computer graphics may be used with the EDIN system for the evaluation of aerospace vehicles preliminary designs: offline graphics systems using vellum-inking or photographic processes, online graphics systems characterized by direct coupled low cost storage tube terminals with limited interactive capabilities, and a minicomputer based refresh terminal offering highly interactive capabilities. The offline line systems are characterized by high quality (resolution better than 0.254 mm) and slow turnaround (one to four days). The online systems are characterized by low cost, instant visualization of the computer results, slow line speed (300 BAUD), poor hard copy, and the early limitations on vector graphic input capabilities. The recent acquisition of the Adage 330 Graphic Display system has greatly enhanced the potential for interactive computer aided design.

  2. CADRIGS--computer aided design reliability interactive graphics system

    International Nuclear Information System (INIS)

    Kwik, R.J.; Polizzi, L.M.; Sticco, S.; Gerrard, P.B.; Yeater, M.L.; Hockenbury, R.W.; Phillips, M.A.

    1982-01-01

    An integrated reliability analysis program combining graphic representation of fault trees, automated data base loadings and reference, and automated construction of reliability code input files was developed. The functional specifications for CADRIGS, the computer aided design reliability interactive graphics system, are presented. Previously developed fault tree segments used in auxiliary feedwater system safety analysis were constructed on CADRIGS and, when combined, yielded results identical to those resulting from manual input to the same reliability codes

  3. Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

    Science.gov (United States)

    Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

    1990-01-01

    We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

  4. Design of Graphic Aggregation Model for Evaluation of Energy Systems

    International Nuclear Information System (INIS)

    An, Sang Ha; Jeong, Yong Hoon; Chang, Won Joon; Chang, Soon Heung; Kim, Sung Ho; Kim, Tae Woon

    2006-01-01

    Korea is meeting the growing electric power needs by mix of nuclear, fossil, hydro energy and so on. But we can not depend on fossil energy forever, and the people's concern about environment has been changed. So it is time to plan future energy mix considering multiple parameters such as economics, environment, social, energy security, etc. A multiple aggregation model has been used for decision making process in which multiple variables should be considered like energy mix. In this context, we designed Graphic Aggregation Model for Evaluation of energy systems (GAME) for the dynamic analysis of decision on the energy systems. It can support Analytic Hierarchy Process (AHP) analysis based on Graphic User Interface

  5. Design Graphics

    Science.gov (United States)

    1990-01-01

    A mathematician, David R. Hedgley, Jr. developed a computer program that considers whether a line in a graphic model of a three-dimensional object should or should not be visible. Known as the Hidden Line Computer Code, the program automatically removes superfluous lines and displays an object from a specific viewpoint, just as the human eye would see it. An example of how one company uses the program is the experience of Birdair which specializes in production of fabric skylights and stadium covers. The fabric called SHEERFILL is a Teflon coated fiberglass material developed in cooperation with DuPont Company. SHEERFILL glazed structures are either tension structures or air-supported tension structures. Both are formed by patterned fabric sheets supported by a steel or aluminum frame or cable network. Birdair uses the Hidden Line Computer Code, to illustrate a prospective structure to an architect or owner. The program generates a three- dimensional perspective with the hidden lines removed. This program is still used by Birdair and continues to be commercially available to the public.

  6. Sikorsky interactive graphics surface design/manufacturing system

    Science.gov (United States)

    Robbins, R.

    1975-01-01

    An interactive graphics system conceived to be used in the design, analysis, and manufacturing of aircraft components with free form surfaces was described. In addition to the basic surface definition and viewing capabilities inherent in such a system, numerous other features are present: surface editing, automated smoothing of control curves, variable milling patch boundary definitions, surface intersection definition and viewing, automatic creation of true offset surfaces, digitizer and drafting machine interfaces, and cutter path optimization. Documented costs and time savings of better than six to one are being realized with this system. The system was written in FORTRAN and GSP for use on IBM 2250 CRT's in conjunction with an IBM 370/158 computer.

  7. Development of the graphic design and control system based on a graphic simulator for the spent fuel dismantling equipment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. Y.; Kim, S. H.; Song, T. G.; Yoon, J. S

    2000-06-01

    In this study, the graphic design system is developed for designing the spent fuel rod consolidation and the dismantling processes. This system is used throughout the design stages from the conceptual design to the motion analysis. Also, the real-time control system of the rod extracting equipment is developed. This system utilizes the graphic simulator which simulates the motion of the equipment in real time by synchronously connecting the control PC with the graphic server through the TCP/IP network. The developed system is expected to be used as an effective tool in designing the process equipment for the spent fuel management. And the real-time graphic control system can be effectively used to enhance the reliability and safety of the spent fuel handling process by providing the remote monitoring function of the process.

  8. Development of the graphic design and control system based on a graphic simulator for the spent fuel dismantling equipment

    International Nuclear Information System (INIS)

    Lee, J. Y.; Kim, S. H.; Song, T. G.; Yoon, J. S.

    2000-06-01

    In this study, the graphic design system is developed for designing the spent fuel rod consolidation and the dismantling processes. This system is used throughout the design stages from the conceptual design to the motion analysis. Also, the real-time control system of the rod extracting equipment is developed. This system utilizes the graphic simulator which simulates the motion of the equipment in real time by synchronously connecting the control PC with the graphic server through the TCP/IP network. The developed system is expected to be used as an effective tool in designing the process equipment for the spent fuel management. And the real-time graphic control system can be effectively used to enhance the reliability and safety of the spent fuel handling process by providing the remote monitoring function of the process

  9. Signage and wayfinding design a complete guide to creating environmental graphic design systems

    CERN Document Server

    Calori, Chris

    2015-01-01

    A new edition of the market-leading guide to signage and wayfinding design This new edition of Signage and Wayfinding Design: A Complete Guide to Creating Environmental Graphic Design Systems has been fully updated to offer you the latest, most comprehensive coverage of the environmental design process-from research and design development to project execution. Utilizing a cross-disciplinary approach that makes the information relevant to architects, interior designers, landscape architects, graphic designers, and industrial engineers alike, the book arms you with the skills needed to apply a

  10. Interactive computer graphics and its role in control system design of large space structures

    Science.gov (United States)

    Reddy, A. S. S. R.

    1985-01-01

    This paper attempts to show the relevance of interactive computer graphics in the design of control systems to maintain attitude and shape of large space structures to accomplish the required mission objectives. The typical phases of control system design, starting from the physical model such as modeling the dynamics, modal analysis, and control system design methodology are reviewed and the need of the interactive computer graphics is demonstrated. Typical constituent parts of large space structures such as free-free beams and free-free plates are used to demonstrate the complexity of the control system design and the effectiveness of the interactive computer graphics.

  11. PC Software graphics tool for conceptual design of space/planetary electrical power systems

    Science.gov (United States)

    Truong, Long V.

    1995-01-01

    This paper describes the Decision Support System (DSS), a personal computer software graphics tool for designing conceptual space and/or planetary electrical power systems. By using the DSS, users can obtain desirable system design and operating parameters, such as system weight, electrical distribution efficiency, and bus power. With this tool, a large-scale specific power system was designed in a matter of days. It is an excellent tool to help designers make tradeoffs between system components, hardware architectures, and operation parameters in the early stages of the design cycle. The DSS is a user-friendly, menu-driven tool with online help and a custom graphical user interface. An example design and results are illustrated for a typical space power system with multiple types of power sources, frequencies, energy storage systems, and loads.

  12. Graphic design of pinhole cameras

    Science.gov (United States)

    Edwards, H. B.; Chu, W. P.

    1979-01-01

    The paper describes a graphic technique for the analysis and optimization of pinhole size and focal length. The technique is based on the use of the transfer function of optical elements described by Scott (1959) to construct the transfer function of a circular pinhole camera. This transfer function is the response of a component or system to a pattern of lines having a sinusoidally varying radiance at varying spatial frequencies. Some specific examples of graphic design are presented.

  13. Design considerations and philosophy of a device-independent publications/graphics system

    International Nuclear Information System (INIS)

    Burt, J.S.

    1978-01-01

    Over a period of ten years the National Nuclear Data Center has implemented graphics systems to meet a broad range of user requirements in the areas of interactive graphics, publications, and, to a lesser extent, text-editing, graphical data interpretations, and on-line data evaluation. The systems have been designed to support varying levels of user sophistication with respect to programing ability and user knowledge of the hardware involved. An overview is presented of the NNDC's graphics system which is available to the user via a higher-level language, FORTRAN. The system was designed with layers of software between the user and the device-dependent code. One layer is dedicated to processing the incompatibilities and inconsistencies between such devices as paper plotter, interactive graphics, and FR-80 microfilm/microfiche hardware. Another handles the niceties necessary for finer-quality publications work, e.g., superscripting, subscripting, boldface, variable character/page sizing, rotation, the use of multiple character sets (e.g., mathematical, Greek, physics) as well as features to allow the user to design special characters. 12 figures

  14. Critical frameworks for graphic design: graphic design and visual culture

    OpenAIRE

    Dauppe, Michele-Anne

    2011-01-01

    The paper considers an approach to the study of graphic design which addresses the expanding nature of graphic design in the 21st century and the purposeful application of theory to the subject of graphic design. In recent years graphic design has expanded its domain from the world of print culture (e.g. books, posters) into what is sometimes called screen culture. Everything from a mobile phone to a display in an airport lounge to the A.T.M. carries graphic design. It has become ever more ub...

  15. 3D for Graphic Designers

    CERN Document Server

    Connell, Ellery

    2011-01-01

    Helping graphic designers expand their 2D skills into the 3D space The trend in graphic design is towards 3D, with the demand for motion graphics, animation, photorealism, and interactivity rapidly increasing. And with the meteoric rise of iPads, smartphones, and other interactive devices, the design landscape is changing faster than ever.2D digital artists who need a quick and efficient way to join this brave new world will want 3D for Graphic Designers. Readers get hands-on basic training in working in the 3D space, including product design, industrial design and visualization, modeling, ani

  16. Software for graphic display systems

    International Nuclear Information System (INIS)

    Karlov, A.A.

    1978-01-01

    In this paper some aspects of graphic display systems are discussed. The design of a display subroutine library is described, with an example, and graphic dialogue software is considered primarily from the point of view of the programmer who uses a high-level language. (Auth.)

  17. Group Design Problems in Engineering Design Graphics.

    Science.gov (United States)

    Kelley, David

    2001-01-01

    Describes group design techniques used within the engineering design graphics sequence at Western Washington University. Engineering and design philosophies such as concurrent engineering place an emphasis on group collaboration for the solving of design problems. (Author/DDR)

  18. Low-cost compact ECG with graphic LCD and phonocardiogram system design.

    Science.gov (United States)

    Kara, Sadik; Kemaloğlu, Semra; Kirbaş, Samil

    2006-06-01

    Till today, many different ECG devices are made in developing countries. In this study, low cost, small size, portable LCD screen ECG device, and phonocardiograph were designed. With designed system, heart sounds that take synchronously with ECG signal are heard as sensitive. Improved system consist three units; Unit 1, ECG circuit, filter and amplifier structure. Unit 2, heart sound acquisition circuit. Unit 3, microcontroller, graphic LCD and ECG signal sending unit to computer. Our system can be used easily in different departments of the hospital, health institution and clinics, village clinic and also in houses because of its small size structure and other benefits. In this way, it is possible that to see ECG signal and hear heart sounds as synchronously and sensitively. In conclusion, heart sounds are heard on the part of both doctor and patient because sounds are given to environment with a tiny speaker. Thus, the patient knows and hears heart sounds him/herself and is acquainted by doctor about healthy condition.

  19. Graphic Design for Researchers

    Science.gov (United States)

    Regional Educational Laboratory, 2014

    2014-01-01

    Technology continues to radically change how we create and consume information. Today, news, reports, and other material are often delivered quickly through pictures, colors, or other eye-catching visual elements. Words still matter, but they may be tweeted, viewed on a smartphone, or placed in a call-out box in a report. The design of these items…

  20. EBR-II Cover Gas Cleanup System (CGCS) upgrade graphical interface design

    International Nuclear Information System (INIS)

    Staffon, J.D.; Peters, G.G.

    1992-01-01

    Technology advances in the past few years have prompted an effort at Argonne National Laboratory to replace existing equipment with high performance digital computers and color graphic displays. Improved operation of process systems can be achieved by utilizing state-of-the-art computer technology in the areas of process control and process monitoring. The Cover Gas Cleanup System (CGCS) at EBR-II is the first system to be upgraded with high performance digital equipment. The upgrade consisted of a main control computer, a distributed control computer, a front end input/output computer, a main graphics interface terminal, and a remote graphics interface terminal. This paper describes the main control computer and the operator interface control software

  1. Recorded Music and Graphic Design.

    Science.gov (United States)

    Osterer, Irv

    1998-01-01

    Reviews the history of art as an element of music-recording packaging. Describes a project in which students design a jacket for either cassette or CD using a combination of computerized and traditional rendering techniques. Reports that students have been inspired to look into careers in graphic design. (DSK)

  2. A graphics subsystem retrofit design for the bladed-disk data acquisition system. M.S. Thesis

    Science.gov (United States)

    Carney, R. R.

    1983-01-01

    A graphics subsystem retrofit design for the turbojet blade vibration data acquisition system is presented. The graphics subsystem will operate in two modes permitting the system operator to view blade vibrations on an oscilloscope type of display. The first mode is a real-time mode that displays only gross blade characteristics, such as maximum deflections and standing waves. This mode is used to aid the operator in determining when to collect detailed blade vibration data. The second mode of operation is a post-processing mode that will animate the actual blade vibrations using the detailed data collected on an earlier data collection run. The operator can vary the rate of payback to view differring characteristics of blade vibrations. The heart of the graphics subsystem is a modified version of AMD's ""super sixteen'' computer, called the graphics preprocessor computer (GPC). This computer is based on AMD's 2900 series of bit-slice components.

  3. SystemCSP: A graphical language for designing concurrent component-based embedded control systems

    NARCIS (Netherlands)

    Orlic, B.

    2007-01-01

    Realization of embedded control systems is a complex task. Increasing part of this complexity is nowadays located in the design and implementation of software that runs them. A major source of difficulties is the limitation of the average software developer to understand and design complex

  4. An Opening: Graphic Design's Discursive Spaces.

    Science.gov (United States)

    Blauvelt, Andrew

    1994-01-01

    Introduces a special issue on critical histories of graphic design with a review of the particular problems identified with the history of graphic design as a field of study and the emerging discipline of graphic design history. Makes a case for the examination of graphic design through its relationships with larger discourses. (SR)

  5. Antinomies of Semiotics in Graphic Design

    Science.gov (United States)

    Storkerson, Peter

    2010-01-01

    The following paper assesses the roles played by semiotics in graphic design and in graphic design education, which both reflects and shapes practice. It identifies a series of factors; graphic design education methods and culture; semiotic theories themselves and their application to graphic design; the two wings of Peircian semiotics and…

  6. Graphic Design Career Guide 2. Revised Edition.

    Science.gov (United States)

    Craig, James

    The graphic design field is diverse and includes many areas of specialization. This guide introduces students to career opportunities in graphic design. The guide is organized in four parts. "Part One: Careers in Graphic Design" identifies and discusses the various segments of the graphic design industry, including: Advertising, Audio-Visual, Book…

  7. A Poetics of Graphic Design?

    Science.gov (United States)

    Baker, Steve

    1994-01-01

    Proposes that the work of the French feminist writers Helene Cixous and Luce Irigaray could serve as the basis for devising a more imaginative form of critical writing that might help to draw the history and practice of graphic design into a closer and more purposeful relation. (SR)

  8. Can we be more Graphic about Graphic Design?

    OpenAIRE

    Vienne, Véronique

    2012-01-01

    Can you objectify a subjective notion? This is the question graphic designers must face when they talk about their work. Even though graphic design artifacts are omnipresent in our culture, graphic design is still an exceptionally ill-defined profession. This is one of the reasons design criticism is still a rudimentary discipline. No one knows for sure what is this thing we sometimes call “graphic communication” for lack of a better word–a technique my Webster’s dictionary describes as “the ...

  9. The Effectiveness of Teaching Methods Used in Graphic Design Pedagogy in Both Analogue and Digital Education Systems

    Science.gov (United States)

    Alhajri, Salman

    2016-01-01

    Purpose: this paper investigates the effectiveness of teaching methods used in graphic design pedagogy in both analogue and digital education systems. Methodology and approach: the paper is based on theoretical study using a qualitative, case study approach. Comparison between the digital teaching methods and traditional teaching methods was…

  10. Power System Stabilizer Design Based on a Particle Swarm Optimization Multiobjective Function Implemented Under Graphical Interface

    Directory of Open Access Journals (Sweden)

    Ghouraf Djamel Eddine

    2016-05-01

    Full Text Available Power system stability considered a necessary condition for normal functioning of an electrical network. The role of regulation and control systems is to ensure that stability by determining the essential elements that influence it. This paper proposes a Particle Swarm Optimization (PSO based multiobjective function to tuning optimal parameters of Power System Stabilizer (PSS; this later is used as auxiliary to generator excitation system in order to damp electro mechanicals oscillations of the rotor and consequently improve Power system stability. The computer simulation results obtained by developed graphical user interface (GUI have proved the efficiency of PSS optimized by a Particle Swarm Optimization, in comparison with a conventional PSS, showing stable   system   responses   almost   insensitive   to   large parameter variations.Our present study was performed using a GUI realized under MATLAB in our work.

  11. A Web-Based Graphical Food Frequency Assessment System: Design, Development and Usability Metrics.

    Science.gov (United States)

    Franco, Rodrigo Zenun; Alawadhi, Balqees; Fallaize, Rosalind; Lovegrove, Julie A; Hwang, Faustina

    2017-05-08

    Food frequency questionnaires (FFQs) are well established in the nutrition field, but there remain important questions around how to develop online tools in a way that can facilitate wider uptake. Also, FFQ user acceptance and evaluation have not been investigated extensively. This paper presents a Web-based graphical food frequency assessment system that addresses challenges of reproducibility, scalability, mobile friendliness, security, and usability and also presents the utilization metrics and user feedback from a deployment study. The application design employs a single-page application Web architecture with back-end services (database, authentication, and authorization) provided by Google Firebase's free plan. Its design and responsiveness take advantage of the Bootstrap framework. The FFQ was deployed in Kuwait as part of the EatWellQ8 study during 2016. The EatWellQ8 FFQ contains 146 food items (including drinks). Participants were recruited in Kuwait without financial incentive. Completion time was based on browser timestamps and usability was measured using the System Usability Scale (SUS), scoring between 0 and 100. Products with a SUS higher than 70 are considered to be good. A total of 235 participants created accounts in the system, and 163 completed the FFQ. Of those 163 participants, 142 reported their gender (93 female, 49 male) and 144 reported their date of birth (mean age of 35 years, range from 18-65 years). The mean completion time for all FFQs (n=163), excluding periods of interruption, was 14.2 minutes (95% CI 13.3-15.1 minutes). Female participants (n=93) completed in 14.1 minutes (95% CI 12.9-15.3 minutes) and male participants (n=49) completed in 14.3 minutes (95% CI 12.6-15.9 minutes). Participants using laptops or desktops (n=69) completed the FFQ in an average of 13.9 minutes (95% CI 12.6-15.1 minutes) and participants using smartphones or tablets (n=91) completed in an average of 14.5 minutes (95% CI 13.2-15.8 minutes). The median SUS

  12. Narrative Problems of Graphic Design History.

    Science.gov (United States)

    Margolin, Victor

    1994-01-01

    Discusses three major accounts (by Philip Meggs, Enric Satue and Richard Hollis) of graphic design history. Notes that these texts address the history of graphic design, but each raises questions about what material to include, as well as how graphic design is both related to and distinct from other visual practices such as typography, art…

  13. Design considerations for parallel graphics libraries

    Science.gov (United States)

    Crockett, Thomas W.

    1994-01-01

    Applications which run on parallel supercomputers are often characterized by massive datasets. Converting these vast collections of numbers to visual form has proven to be a powerful aid to comprehension. For a variety of reasons, it may be desirable to provide this visual feedback at runtime. One way to accomplish this is to exploit the available parallelism to perform graphics operations in place. In order to do this, we need appropriate parallel rendering algorithms and library interfaces. This paper provides a tutorial introduction to some of the issues which arise in designing parallel graphics libraries and their underlying rendering algorithms. The focus is on polygon rendering for distributed memory message-passing systems. We illustrate our discussion with examples from PGL, a parallel graphics library which has been developed on the Intel family of parallel systems.

  14. Graphic Design in Libraries: A Conceptual Process

    Science.gov (United States)

    Ruiz, Miguel

    2014-01-01

    Providing successful library services requires efficient and effective communication with users; therefore, it is important that content creators who develop visual materials understand key components of design and, specifically, develop a holistic graphic design process. Graphic design, as a form of visual communication, is the process of…

  15. Cockpit design and evaluation using interactive graphics

    Science.gov (United States)

    Evans, S. M.

    1975-01-01

    A general overview of the characteristics of an interactive graphics system which was developed to assist cockpit engineers design and evaluate work stations was presented. The manikin used in this COMputerized BIomechanical MAN-model (COMBIMAN) was described, as are provisions for generating work stations and assessing interactions between man and environment. The applications of the present system are explained, and critiques of COMBIMAN are presented. The limitations of the existing programs and the requirements of the designers necessitate future revisions and additions to the biomechanical and erogonomic properties of COMBIMAN. Some of these enhancements are discussed.

  16. [Hardware for graphics systems].

    Science.gov (United States)

    Goetz, C

    1991-02-01

    In all personal computer applications, be it for private or professional use, the decision of which "brand" of computer to buy is of central importance. In the USA Apple computers are mainly used in universities, while in Europe computers of the so-called "industry standard" by IBM (or clones thereof) have been increasingly used for many years. Independently of any brand name considerations, the computer components purchased must meet the current (and projected) needs of the user. Graphic capabilities and standards, processor speed, the use of co-processors, as well as input and output devices such as "mouse", printers and scanners are discussed. This overview is meant to serve as a decision aid. Potential users are given a short but detailed summary of current technical features.

  17. Animated GIFs as vernacular graphic design

    DEFF Research Database (Denmark)

    Gürsimsek, Ödül Akyapi

    2016-01-01

    and often a mix of some of these modes, seem to enable participatory conversations by the audience communities that continue over a period of time. One example of such multimodal digital content is the graphic format called the animated GIF (graphics interchange format). This article focuses on content......Online television audiences create a variety of digital content on the internet. Fans of television production design produce and share such content to express themselves and engage with the objects of their interest. These digital expressions, which exist in the form of graphics, text, videos...... as design, both in the sense that multimodal meaning making is an act of design and in the sense that web-based graphics are designed graphics that are created through a design process. She specifically focuses on the transmedia television production entitled Lost and analyzes the design of animated GIFs...

  18. Standards of Multimedia Graphic Design in Education

    Science.gov (United States)

    Aldalalah, Osamah Ahmad; Ababneh, Ziad Waleed Mohamed

    2015-01-01

    This study aims to determine Standards of Multimedia Graphic Design in Education through the analysis of the theoretical basis and previous studies related to this subject. This study has identified the list of standards of Multimedia, Graphic Design, each of which has a set indicator through which the quality of Multimedia can be evaluated in…

  19. BEAMR: An interactive graphic computer program for design of charged particle beam transport systems

    Science.gov (United States)

    Leonard, R. F.; Giamati, C. C.

    1973-01-01

    A computer program for a PDP-15 is presented which calculates, to first order, the characteristics of charged-particle beam as it is transported through a sequence of focusing and bending magnets. The maximum dimensions of the beam envelope normal to the transport system axis are continuously plotted on an oscilloscope as a function of distance along the axis. Provision is made to iterate the calculation by changing the types of magnets, their positions, and their field strengths. The program is especially useful for transport system design studies because of the ease and rapidity of altering parameters from panel switches. A typical calculation for a system with eight elements is completed in less than 10 seconds. An IBM 7094 version containing more-detailed printed output but no oscilloscope display is also presented.

  20. Graphic Designer/Production Coordinator | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Provides design and graphic services for print- and Web-based publishing;; Initiates designs and carries out ... process, ensuring that such suppliers meet appropriate standards of quality and service at reasonable cost; ... Internal Services.

  1. Graphical Model Debugger Framework for Embedded Systems

    DEFF Research Database (Denmark)

    Zeng, Kebin

    2010-01-01

    Model Driven Software Development has offered a faster way to design and implement embedded real-time software by moving the design to a model level, and by transforming models to code. However, the testing of embedded systems has remained at the code level. This paper presents a Graphical Model...... Debugger Framework, providing an auxiliary avenue of analysis of system models at runtime by executing generated code and updating models synchronously, which allows embedded developers to focus on the model level. With the model debugger, embedded developers can graphically test their design model...

  2. Deconstruction and Graphic Design: History Meets Theory.

    Science.gov (United States)

    Lupton, Ellen; Miller, J. Abbott

    1994-01-01

    Considers the reception and use of deconstruction in the recent history of graphic design. Considers the place of graphics within the theory of deconstruction in the work of philosopher Jacques Derrida. Argues that deconstruction is not a style but a mode of questioning through and about the technologies, formal devices, social institutions and…

  3. History And Importance Of Graphic Design

    OpenAIRE

    Lyallya, Kirill

    2016-01-01

    This thesis is about history and importance of graphic design in different periods, from ancient times until today. The features inherent in different countries are considered. The techniques, basic methods for creating projects and computer software that designers have used are mentioned. In order to understand the importance of graphic design in our lives, it is considered from the side of ordinary people, how it manifests itself in daily lives and how it affects business. The thesis provid...

  4. Assessing Whether Students Seek Constructive Criticism: The Design of an Automated Feedback System for a Graphic Design Task

    Science.gov (United States)

    Cutumisu, Maria; Blair, Kristen P.; Chin, Doris B.; Schwartz, Daniel L.

    2017-01-01

    We introduce a choice-based assessment strategy that measures students' choices to seek constructive feedback and to revise their work. We present the feedback system of a game we designed to assess whether students choose positive or negative feedback and choose to revise their posters in the context of a poster design task, where they learn…

  5. A brief essay on ergonomics in graphic design.

    Science.gov (United States)

    Mendonça, André N F; van der Linden, Júlio C S; Fonseca, Tania M G

    2012-01-01

    Through Brazilian publication revision on the relations amongst Ergonomics and Design, we observed the tendency towards an approach focusing on product design. However, it is our duty to question which would be the influences of ergonomics in the graphic design. As a methodology, we considered the identification that the practices derived from ergonomics as epistemic system found in the main bibliography related to graphic design.

  6. Graphic Design for the Real World?

    DEFF Research Database (Denmark)

    Elisabeth Bichler, Katrine; Beier, Sofie

    2016-01-01

    This article examines graphic design’s role within design activism. It outlines design activism in general and its relation to commercial design culture in a consumerist economy. Thereafter it discusses persuasive tendencies in graphic design and questions if its current contribution to design...... activism is limited to its predominant narrow role of persuading for “the good cause.” To illustrate the hypothesis that such a persuasive approach lacks activist potential and thus social impact, cases that represent traditional graphic-design activism are compared to alternative approaches...... solely solving communicative problems for commissioning clients. It is argued that in this way visual communication can intervene into problems on a functional level, similarly to artifacts from design disciplines such as architecture and industrial or product design....

  7. Graphic User Interface Design for Mapping, Information, Display, and Analysis Systems

    National Research Council Canada - National Science Library

    Lowell, James

    2000-01-01

    This thesis evaluates both the interface design process and the map-based mission planning tools of the Loosely Coupled Components Research Group, Naval Postgraduate School, for human factors usability...

  8. Design for scalability in 3D computer graphics architectures

    DEFF Research Database (Denmark)

    Holten-Lund, Hans Erik

    2002-01-01

    This thesis describes useful methods and techniques for designing scalable hybrid parallel rendering architectures for 3D computer graphics. Various techniques for utilizing parallelism in a pipelines system are analyzed. During the Ph.D study a prototype 3D graphics architecture named Hybris has...

  9. Trend Monitoring System (TMS) graphics software

    Science.gov (United States)

    Brown, J. S.

    1979-01-01

    A prototype bus communications systems, which is being used to support the Trend Monitoring System (TMS) and to evaluate the bus concept is considered. A set of FORTRAN-callable graphics subroutines for the host MODCOMP comuter, and an approach to splitting graphics work between the host and the system's intelligent graphics terminals are described. The graphics software in the MODCOMP and the operating software package written for the graphics terminals are included.

  10. Basic Graphical Data Management System (BAGDAMS version 1.0)

    International Nuclear Information System (INIS)

    Weindorf, J.W.

    1979-06-01

    BAGDAMS (BAsic Graphical DAta Management System) is a set of FORTRAN callable subroutines which provides mass storage data structuring and manipulation capabilities. Although primarily designed to facilitate the handling of graphical data files (files containing information to be displayed upon graphical hardware devices), BAGDAMS can also be used in many other applications requiring complex mass storage resident data structures. (author)

  11. Architects in Danish Graphic Design

    DEFF Research Database (Denmark)

    Ejlers, Steen

    1997-01-01

    Danske arkitekter har ydet et afgørende bidrag til dansk grafisk design i det 20. århundrede. Artiklen omtaler Thorvald Bindesbøll, Knud V Engelhardt, Gunnar Biilmann Petersen, Ib Andersen, Claus Achton Friis og Naur Klint.  Udgivelsesdato: 1997......Danske arkitekter har ydet et afgørende bidrag til dansk grafisk design i det 20. århundrede. Artiklen omtaler Thorvald Bindesbøll, Knud V Engelhardt, Gunnar Biilmann Petersen, Ib Andersen, Claus Achton Friis og Naur Klint.  Udgivelsesdato: 1997...

  12. Interactive Learning for Graphic Design Foundations

    Science.gov (United States)

    Chu, Sauman; Ramirez, German Mauricio Mejia

    2012-01-01

    One of the biggest problems for students majoring in pre-graphic design is students' inability to apply their knowledge to different design solutions. The purpose of this study is to examine the effectiveness of interactive learning modules in facilitating knowledge acquisition during the learning process and to create interactive learning modules…

  13. Are Graphic Designers Killing Newspapers?

    Directory of Open Access Journals (Sweden)

    Kevin G. Barnhurst, Ph.D.

    1998-01-01

    Full Text Available Newspapers are doomed to die, according to recent preductions, and be replaced by brave new technological news. Even news executives argue that they're no longer in the newspaper business; they're in the information business. This analogy saps journalism of the central passion that made newspapers: ink and paper. The fate of journalism then falls into the hands of information specialists and designers, the confectioners needed to make dry information. Rather than news, these professionals value other things. Typographers respect books and make newspapers look more book-like. Illustrators aspire to make art posters of news. Designers of "infographics" admire Minard and page designers emulate Mondrian. The consequences are visible: newspapers that look beautiful but can't hold as much news about ordinary people. Without room for a more diverse public, newspapers will die. Paper and ink are the key to the ritual of news reading. Paper news contributes to the collective memory in ways digital forms cannot, at least not yet.* El periódico

  14. Involving Motion Graphics in Spatial Experience Design

    DEFF Research Database (Denmark)

    Steijn, Arthur

    2013-01-01

    elements such as e.g. space, tone, color, movement, time and timing. Developing this design model has two purposes. The first is as a tool for analyzing empirical examples or cases of where motion graphics is used in spatial experience design. The second is as a tool that can be used in the actual design...... process, and therefore it should be constructed as such. Since the development of the design model has this double focus, I involve design students in design laboratories related to my practice as a teacher in visual communication design and production design. I also reflect on how an initial design...

  15. Transforming Graphical System Models to Graphical Attack Models

    DEFF Research Database (Denmark)

    Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, Rene Rydhof

    2016-01-01

    Manually identifying possible attacks on an organisation is a complex undertaking; many different factors must be considered, and the resulting attack scenarios can be complex and hard to maintain as the organisation changes. System models provide a systematic representation of organisations...... approach to transforming graphical system models to graphical attack models in the form of attack trees. Based on an asset in the model, our transformations result in an attack tree that represents attacks by all possible actors in the model, after which the actor in question has obtained the asset....

  16. GRAPHIC AND MEANING IN LOGO DESIGN

    Directory of Open Access Journals (Sweden)

    ADÎR Victor

    2015-06-01

    Full Text Available To design a logo is a special work. It means creation, intelligence, use of colors, and of course, signs and symbols. It is about a visual personality and a signature of an entity. During the working process, a designer has to answer to a few questions, such as: What signs, symbols and colors have to be used? or What are the important things be design in a logo? What are the logos in the market about a same activity? To answer means to design it. The meaning comes mainly from graphics and that is why it is compulsory to pay attention to each detail. The paper talks about the connection between graphic and meaning which may create a corporate identity.

  17. Interdisciplinarity between graphic design and communication

    OpenAIRE

    Sagin, Lis Antunes; Faculdade Pitágoras; Gomes, Rogério Zanetti; Coordenador da Pós graduação em Design e Cognição e Mídia da Faculdade Pitágoras. Unidade Londrina.

    2011-01-01

    In this paper we explore interdisciplinarity as an instrument of union, between the two disciplines of communication, graphic design and communication, practice of the profession. The research was conducted by reviewing literature; It is exposing a case related to magazine "CLAUDIA" pointing out how this unification has brought success to the complexity and design in a subtle and complete. Neste trabalho explora-se a interdisciplinaridade como um instrumento de união entre duas disciplinas...

  18. Graphical Acoustic Liner Design and Analysis Tool

    Science.gov (United States)

    Howerton, Brian M. (Inventor); Jones, Michael G. (Inventor)

    2016-01-01

    An interactive liner design and impedance modeling tool comprises software utilized to design acoustic liners for use in constrained spaces, both regularly and irregularly shaped. A graphical user interface allows the acoustic channel geometry to be drawn in a liner volume while the surface impedance calculations are updated and displayed in real-time. A one-dimensional transmission line model may be used as the basis for the impedance calculations.

  19. Peer assessment in graphic design studio: Communication design ...

    African Journals Online (AJOL)

    Peer assessment in graphic design studio: Communication design students' perspectives. ... Journal of Science and Technology (Ghana) ... The purpose of this study was to examine students' perceptions of their attitudes during peer ...

  20. On the Role of Computer Graphics in Engineering Design Graphics Courses.

    Science.gov (United States)

    Pleck, Michael H.

    The implementation of two- and three-dimensional computer graphics in a freshmen engineering design course at the university level is described. An assessment of the capabilities and limitations of computer graphics is made, along with a presentation of the fundamental role which computer graphics plays in engineering design instruction.…

  1. Librarians and Graphic Design: Preparation, Roles, and Desired Support

    Science.gov (United States)

    Wakimoto, Diana K.

    2015-01-01

    Librarians often become de facto graphic designers for their libraries, taking responsibility for designing signage, handouts, brochures, web pages, and many other promotional, instructional, and wayfinding documents. However, the majority of librarians with graphic design responsibilities are not trained as graphic designers. This exploratory…

  2. Engineering Design Graphics: Into the 21st Century

    Science.gov (United States)

    Harris, La Verne Abe; Meyers, Frederick

    2007-01-01

    Graphical plans for construction of machinery and architecture have evolved over the last 6,000 years beginning from hieroglyphics to drawings on printable media, from the "Golden Age" of engineering graphics to the innovation of computer graphics and prototyping. The evolution of engineering design graphics as a profession has also evolved. Years…

  3. Scientific and Graphic Design Foundations for C2

    Science.gov (United States)

    2007-06-01

    the elements in the composition. This section presents a summary of the concepts in graphic design layout, typography , color, and data graphics ...document for ease of use 4 Graphic Design • Layout – Literally the aesthetic of the display design • Typography – Serif versus san serif – Font sizes...12th ICCRTS “Adapting C2 to the 21st Century” Title: Scientific and graphic design foundations for C2 Topics: C2 Concepts, Theory and

  4. Engineering computer graphics in gas turbine engine design, analysis and manufacture

    Science.gov (United States)

    Lopatka, R. S.

    1975-01-01

    A time-sharing and computer graphics facility designed to provide effective interactive tools to a large number of engineering users with varied requirements was described. The application of computer graphics displays at several levels of hardware complexity and capability is discussed, with examples of graphics systems tracing gas turbine product development, beginning with preliminary design through manufacture. Highlights of an operating system stylized for interactive engineering graphics is described.

  5. THE USING OF GRAPHICAL EDITOR IN THE ENGINEERING GRAPHICS AND THE COURSE DESIGNING

    Directory of Open Access Journals (Sweden)

    KARPYUK L. V.

    2016-08-01

    Full Text Available The problems of learning students of the engineering and computer graphics of the course on the base of computer-aided design (CAD were described in the article. The examples of training tasks for acquiring knowledge of work in the environment of graphical editor of AutoCAD were shown. These examples are needed to perform drawings on The Engineering Graphics, and also for a graphic part of Course Projects for students of mechanical specialties.

  6. What Does It Take to Be a Successful Graphic Designer: A Phenomenological Study on Graphic Design Curriculum

    Science.gov (United States)

    Beller, Shannon

    2017-01-01

    This study examined the phenomenon of what it takes to be a successful graphic designer. With an identity crisis in graphic design education, design curriculum is faced with uncertainties. With the diversity of programs and degrees in graphic design, the competencies and skills developed among the various programs reflect different purposes, thus…

  7. The design of a graphics processor

    International Nuclear Information System (INIS)

    Holmes, M.; Thorne, A.R.

    1975-12-01

    The design of a graphics processor is described which takes into account known and anticipated user requirements, the availability of cheap minicomputers, the state of integrated circuit technology, and the overall need to minimise cost for a given performance. The main user needs are the ability to display large high resolution pictures, and to dynamically change the user's view in real time by means of fast coordinate processing hardware. The transformations that can be applied to 2D or 3D coordinates either singly or in combination are: translation, scaling, mirror imaging, rotation, and the ability to map the transformation origin on to any point on the screen. (author)

  8. An improved map based graphical android authentication system ...

    African Journals Online (AJOL)

    Currently, graphical password methods are available for android and other devices, but the major problem is vulnerability issue. A map graphical-based authentication system (Dheeraj et al, 2013) was designed on mobile android devices, but it did not provide a large choice or multiple sequence to user for selecting ...

  9. Design, testing, and delivery of an interactive graphics display subsystem

    Science.gov (United States)

    Holmes, B.

    1973-01-01

    An interactive graphics display system was designed to be used in locating components on a printed circuit card and outputting data concerning their thermal values. The manner in which this was accomplished in terms of both hardware and software is described. An analysis of the accuracy of this approach is also included.

  10. Interactive color graphics system for BWR fuel management

    International Nuclear Information System (INIS)

    Reese, A.P.

    1986-01-01

    An interactive color graphics system has been developed by the General Electric Company for fuel management engineers. The system consists of a Hewlett-Packard color graphics workstation in communication with a host mainframe. The system aids in such tasks as fuel cycle optimization, refueling bundle shuffle and control blade sequence design. Since being installed in 1983 turn-around time for a typical cycle reload and control blade pattern design has been reduced by a factor of four

  11. SPACEBAR: Kinematic design by computer graphics

    Science.gov (United States)

    Ricci, R. J.

    1975-01-01

    The interactive graphics computer program SPACEBAR, conceived to reduce the time and complexity associated with the development of kinematic mechanisms on the design board, was described. This program allows the direct design and analysis of mechanisms right at the terminal screen. All input variables, including linkage geometry, stiffness, and applied loading conditions, can be fed into or changed at the terminal and may be displayed in three dimensions. All mechanism configurations can be cycled through their range of travel and viewed in their various geometric positions. Output data includes geometric positioning in orthogonal coordinates of each node point in the mechanism, velocity and acceleration of the node points, and internal loads and displacements of the node points and linkages. All analysis calculations take at most a few seconds to complete. Output data can be viewed at the scope and also printed at the discretion of the user.

  12. Graphic man-machine interface applied to nuclear reactor designs

    International Nuclear Information System (INIS)

    Pereira, Claudio M.N.A; Mol, Antonio Carlos A.

    1999-01-01

    The Man-Machine Interfaces have been of interest of many researchers in the area of nuclear human factors engineering, principally applied to monitoring systems. The clarity of information provides best adaptation of the men to the machine. This work proposes the development of a Graphic Man-Machine Interface applied to nuclear reactor designs as a tool to optimize them. Here is present a prototype of a graphic man-machine interface for the Hammer code developed for PC under the Windows environment. The results of its application are commented. (author)

  13. DDP-516 Computer Graphics System Capabilities

    Science.gov (United States)

    1972-06-01

    This report describes the capabilities of the DDP-516 Computer Graphics System. One objective of this report is to acquaint DOT management and project planners with the system's current capabilities, applications hardware and software. The Appendix i...

  14. Optical design teaching by computing graphic methods

    Science.gov (United States)

    Vazquez-Molini, D.; Muñoz-Luna, J.; Fernandez-Balbuena, A. A.; Garcia-Botella, A.; Belloni, P.; Alda, J.

    2012-10-01

    One of the key challenges in the teaching of Optics is that students need to know not only the math of the optical design, but also, and more important, to grasp and understand the optics in a three-dimensional space. Having a clear image of the problem to solve is the first step in order to begin to solve that problem. Therefore to achieve that the students not only must know the equation of refraction law but they have also to understand how the main parameters of this law are interacting among them. This should be a major goal in the teaching course. Optical graphic methods are a valuable tool in this way since they have the advantage of visual information and the accuracy of a computer calculation.

  15. Future of motion graphics and particle systems

    OpenAIRE

    Warambo, Bryan

    2012-01-01

    The purpose of this research is to study the use of particle systems in motion graphics, which is known to be the most popular graphics tool for multiple animated elements. It is known to be a procedural animation because as the emitter builds up more particles are formed to create a motion effect. At the same time exploring the future of motion graphics and Particle systems connection and the relevance it has in terms of longevity in being a major post-production element in digital media. Th...

  16. Improving aircraft conceptual design - A PHIGS interactive graphics interface for ACSYNT

    Science.gov (United States)

    Wampler, S. G.; Myklebust, A.; Jayaram, S.; Gelhausen, P.

    1988-01-01

    A CAD interface has been created for the 'ACSYNT' aircraft conceptual design code that permits the execution and control of the design process via interactive graphics menus. This CAD interface was coded entirely with the new three-dimensional graphics standard, the Programmer's Hierarchical Interactive Graphics System. The CAD/ACSYNT system is designed for use by state-of-the-art high-speed imaging work stations. Attention is given to the approaches employed in modeling, data storage, and rendering.

  17. OAP- OFFICE AUTOMATION PILOT GRAPHICS DATABASE SYSTEM

    Science.gov (United States)

    Ackerson, T.

    1994-01-01

    The Office Automation Pilot (OAP) Graphics Database system offers the IBM PC user assistance in producing a wide variety of graphs and charts. OAP uses a convenient database system, called a chartbase, for creating and maintaining data associated with the charts, and twelve different graphics packages are available to the OAP user. Each of the graphics capabilities is accessed in a similar manner. The user chooses creation, revision, or chartbase/slide show maintenance options from an initial menu. The user may then enter or modify data displayed on a graphic chart. The cursor moves through the chart in a "circular" fashion to facilitate data entries and changes. Various "help" functions and on-screen instructions are available to aid the user. The user data is used to generate the graphics portion of the chart. Completed charts may be displayed in monotone or color, printed, plotted, or stored in the chartbase on the IBM PC. Once completed, the charts may be put in a vector format and plotted for color viewgraphs. The twelve graphics capabilities are divided into three groups: Forms, Structured Charts, and Block Diagrams. There are eight Forms available: 1) Bar/Line Charts, 2) Pie Charts, 3) Milestone Charts, 4) Resources Charts, 5) Earned Value Analysis Charts, 6) Progress/Effort Charts, 7) Travel/Training Charts, and 8) Trend Analysis Charts. There are three Structured Charts available: 1) Bullet Charts, 2) Organization Charts, and 3) Work Breakdown Structure (WBS) Charts. The Block Diagram available is an N x N Chart. Each graphics capability supports a chartbase. The OAP graphics database system provides the IBM PC user with an effective means of managing data which is best interpreted as a graphic display. The OAP graphics database system is written in IBM PASCAL 2.0 and assembler for interactive execution on an IBM PC or XT with at least 384K of memory, and a color graphics adapter and monitor. Printed charts require an Epson, IBM, OKIDATA, or HP Laser

  18. The appliance of graphics modeling in nuclear plant information system

    International Nuclear Information System (INIS)

    Bai Zhe; Li Guofang

    2010-01-01

    The nuclear plants contain a lot of sub-system, such as operation management, manufacture system, inventory system, human resource system and so forth. The standardized data graphics modeling technology can ensure the data interaction, compress the design cycle, avoid the replicated design, ensure the data integrity and consistent. The standardized data format which is on the basis of STEP standard and complied with XML is competent tool in different sub-system of nuclear plants. In order to meet this demand, a data graphics modeling standard is proposed. It is shown the relationship between systems, in system, between data by the standard. The graphic modeling effectively improves the performance between systems, designers, engineers, operations, supports department. It also provides the reliable and available data source for data mining and business intelligence. (authors)

  19. Creating a Strong Foundation with Engineering Design Graphics.

    Science.gov (United States)

    Newcomer, Jeffrey L.; McKell, Eric K.; Raudebaugh, Robert A.; Kelley, David S.

    2001-01-01

    Describes the two-course engineering design graphics sequence on introductory design and graphics topics. The first course focuses on conceptual design and the development of visualization and sketching skills while the second one concentrates on detail design and parametric modeling. (Contains 28 references.) (Author/ASK)

  20. Investigating Creativity in Graphic Design Education from Psychological Perspectives

    Directory of Open Access Journals (Sweden)

    Salman Amur Alhajri

    2017-01-01

    Full Text Available The role of creativity in graphic design education has been a central aspect of graphic design education. The psychological component of creativity and its role in graphic design education has not been given much importance. The present research would attempt to study ‘creativity in graphic design education from psychological perspectives’. A thorough review of literature would be conducted on graphic design education, creativity and its psychological aspects. Creativity is commonly defined as a ‘problem solving’ feature in design education. Students of graphic design have to involve themselves in the identification of cultural and social elements. Instruction in the field of graphic design must be aimed at enhancing the creative abilities of the student. The notion that creativity is a cultural production is strengthened by the problem solving methods employed in all cultures. Most cultures regard creativity as a process which leads to the creation of something new. Based on this idea, a cross-cultural research was conducted to explore the concept of creativity from Arabic and Western perspective. From a psychological viewpoint, the student’s cognition, thinking patterns and habits also have a role in knowledge acquisition. The field of graphic design is not equipped with a decent framework which necessitates certain modes of instruction; appropriate to the discipline. The results of the study revealed that the psychological aspect of creativity needs to be adequately understood in order to enhance creativity in graphic design education.

  1. Modernisation of Graphic Design: The Possibilities and Challenges of Digitalisation

    Directory of Open Access Journals (Sweden)

    Stephen T.F. Poon

    2015-06-01

    Full Text Available As inventions go, the contrivance of design as a dynamic, fluid, operational vehicle of human technology has always been subject to arguments and debates. The digitalisation of graphic design is a comparatively new field of research, a progressive process that evolves with technological developments. Undoubtedly, the evolution of design practices has transformed the entire design process in ways not deemed possible in the past. The advantages of digitalisation are particularly tangible in the range of possibilities generated by computer-based design tools. The main argument for the increase in “design capital” has been the accessibility of modern art tools to both design practitioners and the wider society, through mass digital culture absorption and the emerging technologies of production and reproduction. In presenting the fundamentals of digitalisation in design practices, this paper retraces the key cornerstones in the evolution of graphic design as an aesthetic medium from the 19th - to 21st -century, while pointing out the expanding, reflexive relationships between design and our environment. The researcher’s aim is to connect the socio-historical developmental frames of social progress and the practical uses of digitalisation in art and design today. The innovations in computermediated design work today grew from experimental platforms in the 20th -century, inasmuch as technological diffusion in the 21st -century Information Age derived from the widespread global embrace of the World Wide Web, multimedia and graphical computing systems. As a result of this development of the technological ‘canvas’, the production of design, aesthetic and cultural objects has shifted from the traditional artist-craftsman-specialist paradigm to reflect a more encompassing, diverse scope of ideas fostered by the exposure to different facets of creative capital and inspirations.

  2. SU-E-T-595: Design of a Graphical User Interface for An In-House Monte Carlo Based Treatment Planning System: Planning and Contouring Tools

    International Nuclear Information System (INIS)

    EMAM, M; Eldib, A; Lin, M; Li, J; Chibani, O; Ma, C

    2014-01-01

    Purpose: An in-house Monte Carlo based treatment planning system (MC TPS) has been developed for modulated electron radiation therapy (MERT). Our preliminary MERT planning experience called for a more user friendly graphical user interface. The current work aimed to design graphical windows and tools to facilitate the contouring and planning process. Methods: Our In-house GUI MC TPS is built on a set of EGS4 user codes namely MCPLAN and MCBEAM in addition to an in-house optimization code, which was named as MCOPTIM. Patient virtual phantom is constructed using the tomographic images in DICOM format exported from clinical treatment planning systems (TPS). Treatment target volumes and critical structures were usually contoured on clinical TPS and then sent as a structure set file. In our GUI program we developed a visualization tool to allow the planner to visualize the DICOM images and delineate the various structures. We implemented an option in our code for automatic contouring of the patient body and lungs. We also created an interface window displaying a three dimensional representation of the target and also showing a graphical representation of the treatment beams. Results: The new GUI features helped streamline the planning process. The implemented contouring option eliminated the need for performing this step on clinical TPS. The auto detection option for contouring the outer patient body and lungs was tested on patient CTs and it was shown to be accurate as compared to that of clinical TPS. The three dimensional representation of the target and the beams allows better selection of the gantry, collimator and couch angles. Conclusion: An in-house GUI program has been developed for more efficient MERT planning. The application of aiding tools implemented in the program is time saving and gives better control of the planning process

  3. Design and construction of an automatic measurement electronic system and graphical neutron flux for the subcritical reactor

    International Nuclear Information System (INIS)

    Gonzalez M, J.L.; Balderas, E.G.; Rivero G, T.

    1997-01-01

    The National Institute of Nuclear Research (ININ) has in its installations with a nuclear subcritical reactor which was designed and constructed with the main purpose to be used in the nuclear sciences education in the Physics areas and Reactors engineering. Within the nuclear experiments that can be realized in this reactor are very interesting those about determinations of neutron and gamma fluxes spectra, since starting from these some interesting nuclear parameters can be obtained. In order to carry out this type of experiments different radioactive sources are used which exceed the permissible doses by far to human beings. Therefore it is necessary the remote handling as of the source as of detectors used in different experiments. In this work it is presented the design of an electronic system which allows the different positions inside of the tank of subcritical reactor at ININ over the radial and axial axes in manual or automatic ways. (Author)

  4. Exploring Graphic Design. A Short Course in Desktop Publishing.

    Science.gov (United States)

    Stanley, MLG

    This course in desktop publishing contains seven illustrated modules designed to meet the following objectives: (1) use a desktop publishing program to explore advanced topics in graphic design; (2) learn about typography and how to make design decisions on the use of typestyles; (3) learn basic principles in graphic communications and apply them…

  5. Critique and Process: Signature Pedagogies in the Graphic Design Classroom

    Science.gov (United States)

    Motley, Phillip

    2017-01-01

    Like many disciplines in design and the visual fine arts, critique is a signature pedagogy in the graphic design classroom. It serves as both a formative and summative assessment while also giving students the opportunity to practice the habits of graphic design. Critiques help students become keen observers of relevant disciplinary criteria;…

  6. Toolkit Design for Interactive Structured Graphics

    National Research Council Canada - National Science Library

    Bederson, Benjamin B; Grosjean, Jesse; Meyer, Jon

    2003-01-01

    .... We describe Jazz (a polylithic toolkit) and Piccolo (a monolithic toolkit), each of which we built to support interactive 2D structured graphics applications in general, and Zoomable User Interface applications in particular...

  7. HOW TO ACHIEVE A GRAPHIC LANGUAGE IN A SIGNAGE SYSTEM

    Directory of Open Access Journals (Sweden)

    ADÎR Victor

    2015-06-01

    Full Text Available This paper presents the importance of a signage system to inform and guide with a purpose: to make useful an activity. It is a special role of graphics to connect people to a system which has to be clear and legible. Along our researches in this field we have met various situations when graphic has solved the visible problem. Sometimes is not necessary to write about an activity, it is easy to develop a signage system to be understood by a lot of people. The main characteristic of such system is the design of a set of graphic representations which are much known all over the world. A few examples in this paper will demonstrate why is necessary to achieve a graphic language.

  8. Use of interactive graphics in bridge analysis and design.

    Science.gov (United States)

    1983-01-01

    This study evaluated the role of computer-aided design (CAD), including interactive graphics, in engineering design applications, especially in the design activities of the Virginia Department of Highways and Transportation. A review of the hardware ...

  9. Network performance for graphical control systems

    International Nuclear Information System (INIS)

    Clout, P.; Geib, M.; Westervelt, R.

    1992-01-01

    Vsystem is a toolbox for building graphically-based control systems. The real-tiem database component, Vaccess, includes all the networking support necessary to build multi-computer control systems. Vaccess has two modes of database access, synchronous and asynchronous. Vdraw is another component of Vsystem that allows developers and users to develop control screens and windows by drawing rather than programming. Based on X-windows, Vsystem provides the possibility of running Vdraw either on the workstation with the graphics or on the computer with the database. We have made some measurements on the cpu loading, elapsed time and the network loading to give some guidance in system configuration performance. It will be seen that asynchronous network access gives large performance increases and that the network database change notification protocol can be either more or less efficient than the X-window network protocol, depending on the graphical representation of the data. (author)

  10. Integration of rocket turbine design and analysis through computer graphics

    Science.gov (United States)

    Hsu, Wayne; Boynton, Jim

    1988-01-01

    An interactive approach with engineering computer graphics is used to integrate the design and analysis processes of a rocket engine turbine into a progressive and iterative design procedure. The processes are interconnected through pre- and postprocessors. The graphics are used to generate the blade profiles, their stacking, finite element generation, and analysis presentation through color graphics. Steps of the design process discussed include pitch-line design, axisymmetric hub-to-tip meridional design, and quasi-three-dimensional analysis. The viscous two- and three-dimensional analysis codes are executed after acceptable designs are achieved and estimates of initial losses are confirmed.

  11. Gestalt-A Learning Theory for Graphic Design Education

    Science.gov (United States)

    Jackson, Ian

    2008-01-01

    This article will begin by seeking to define the notion of learning "by, through" and "from" experience. A linkage will then be established between these notions of experiences and gestalt theory. This will be explored within a subject specific context of graphic design. Links will be highlighted between the inherent nature of graphic design and…

  12. Data analysis using a data base driven graphics animation system

    International Nuclear Information System (INIS)

    Schwieder, D.H.; Stewart, H.D.; Curtis, J.N.

    1985-01-01

    A graphics animation system has been developed at the Idaho National Engineering Laboratory (INEL) to assist engineers in the analysis of large amounts of time series data. Most prior attempts at computer animation of data involve the development of large and expensive problem-specific systems. This paper discusses a generalized interactive computer animation system designed to be used in a wide variety of data analysis applications. By using relational data base storage of graphics and control information, considerable flexibility in design and development of animated displays is achieved

  13. General aviation design synthesis utilizing interactive computer graphics

    Science.gov (United States)

    Galloway, T. L.; Smith, M. R.

    1976-01-01

    Interactive computer graphics is a fast growing area of computer application, due to such factors as substantial cost reductions in hardware, general availability of software, and expanded data communication networks. In addition to allowing faster and more meaningful input/output, computer graphics permits the use of data in graphic form to carry out parametric studies for configuration selection and for assessing the impact of advanced technologies on general aviation designs. The incorporation of interactive computer graphics into a NASA developed general aviation synthesis program is described, and the potential uses of the synthesis program in preliminary design are demonstrated.

  14. A graphics based remote handling control system

    International Nuclear Information System (INIS)

    Leinemann, K.

    1984-08-01

    A control and simulation system with an interactive graphic man-machine interface is proposed for the articulated boom in JET. The system shall support 1. the study of boom movements in the planning phase, 2. the training of operators by appropriate simulations, 3. the programming of boom movements, and 4. the on-line control of the boom. A combination of computer graphic display and TV-images is proposed for providing optimum recognition of the actual situation and for echoing to the operator actions. (orig.) [de

  15. The use of graphics in the design of the human-telerobot interface

    Science.gov (United States)

    Stuart, Mark A.; Smith, Randy L.

    1989-01-01

    The Man-Systems Telerobotics Laboratory (MSTL) of NASA's Johnson Space Center employs computer graphics tools in their design and evaluation of the Flight Telerobotic Servicer (FTS) human/telerobot interface on the Shuttle and on the Space Station. It has been determined by the MSTL that the use of computer graphics can promote more expedient and less costly design endeavors. Several specific examples of computer graphics applied to the FTS user interface by the MSTL are described.

  16. Graphical Tests for Power Comparison of Competing Designs.

    Science.gov (United States)

    Hofmann, H; Follett, L; Majumder, M; Cook, D

    2012-12-01

    Lineups have been established as tools for visual testing similar to standard statistical inference tests, allowing us to evaluate the validity of graphical findings in an objective manner. In simulation studies lineups have been shown as being efficient: the power of visual tests is comparable to classical tests while being much less stringent in terms of distributional assumptions made. This makes lineups versatile, yet powerful, tools in situations where conditions for regular statistical tests are not or cannot be met. In this paper we introduce lineups as a tool for evaluating the power of competing graphical designs. We highlight some of the theoretical properties and then show results from two studies evaluating competing designs: both studies are designed to go to the limits of our perceptual abilities to highlight differences between designs. We use both accuracy and speed of evaluation as measures of a successful design. The first study compares the choice of coordinate system: polar versus cartesian coordinates. The results show strong support in favor of cartesian coordinates in finding fast and accurate answers to spotting patterns. The second study is aimed at finding shift differences between distributions. Both studies are motivated by data problems that we have recently encountered, and explore using simulated data to evaluate the plot designs under controlled conditions. Amazon Mechanical Turk (MTurk) is used to conduct the studies. The lineups provide an effective mechanism for objectively evaluating plot designs.

  17. A Complete Interactive Graphical Computer-Aided Instruction System.

    Science.gov (United States)

    Abrams, Steven Selby

    The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

  18. Task-Analytic Design of Graphic Presentations

    Science.gov (United States)

    1990-05-18

    efficiency, and reliability of a set of available cars. (ConsumerReport (DOMAINSETS (VALUE (car NOMINAL 10) (make NOMINAL ( honda nissan toyota )) (model NOMINAL...important premise of Larkin and Simon’s work is that, when comparing alternative presentations, it is fruitful to characterize graphic-based problem solving...practical real-world tasks. Chapter 6 describes an experiment in which participants were asked to use a set of alternative presertations to compare

  19. Designer: A Knowledge-Based Graphic Design Assistant.

    Science.gov (United States)

    1986-07-01

    pro- pulsion. The system consists of a color graphics interface to a mathematical simulation. One can view and manipulate this simulation at a number of...valve vaive graph 50- mufi -plot graph 100 4 0 80 6.. 30 60 4 20 .... 40 2 10 V 20 0 2 4 6 8 10 0 20 40 60 80 100 FIGURE 4. Icon Sampler. This view...in Computing Systems. New York: ACM, 1983. 8306. Paul Smolensky. Harmony Theory: A Mathematical Framework for Stochastic Parallel Pro- cessing

  20. Visual accessibility in graphic design: A client–designer communication failure

    OpenAIRE

    Cornish, Katie; Goodman-Deane, Joy; Ruggeri, Kai; Clarkson, P. John

    2015-01-01

    It is essential that graphic design is visually clear and accessible. However, evidence suggests that a lack of consideration is given to visual accessibility in print-based graphic design. Furthermore, effective client-designer communication is a vital component in this. This paper investigates current graphic design practice, with regard to visual accessibility, specifically focussing on client-designer communication. A survey of 122 graphic designers and clients identified that these two g...

  1. The role of graphic design in marketing communications

    OpenAIRE

    Praznik, Daša

    2014-01-01

    Well designed visual image is the first step of advertising that has an impact on our business partners and consumers. According to Slovenian proverb that "clothes make the man" we could say the same for graphic design and marketing. Well executed graphic design and visual communications enable the communication of our product with a customer. This could be also a communication with artistic approach and a special connection. In order to obtain good results, advertisers use techniques to get...

  2. Learning Layouts for Single-Page Graphic Designs.

    Science.gov (United States)

    O'Donovan, Peter; Agarwala, Aseem; Hertzmann, Aaron

    2014-08-01

    This paper presents an approach for automatically creating graphic design layouts using a new energy-based model derived from design principles. The model includes several new algorithms for analyzing graphic designs, including the prediction of perceived importance, alignment detection, and hierarchical segmentation. Given the model, we use optimization to synthesize new layouts for a variety of single-page graphic designs. Model parameters are learned with Nonlinear Inverse Optimization (NIO) from a small number of example layouts. To demonstrate our approach, we show results for applications including generating design layouts in various styles, retargeting designs to new sizes, and improving existing designs. We also compare our automatic results with designs created using crowdsourcing and show that our approach performs slightly better than novice designers.

  3. Scientific and Graphic Design Foundations for C2

    National Research Council Canada - National Science Library

    Havig, Paul; Ng, Foo M

    2007-01-01

    ... psychological as well as the graphical design literature. However, surveying this vast literature can be daunting as well as overwhelming if one's background is not in the applied science "e.g., psychology...

  4. A Prototype HTML Training System for Graphic Communication Majors

    Science.gov (United States)

    Runquist, Roger L.

    2010-01-01

    This design research demonstrates a prototype content management system capable of training graphic communication students in the creation of basic HTML web pages. The prototype serve as a method of helping students learn basic HTML structure and commands earlier in their academic careers. Exposure to the concepts of web page creation early in…

  5. Comparing graphic actions between remote and proximal design teams

    OpenAIRE

    Garner, Steve

    2001-01-01

    This paper outlines the conduct and findings of a research project which compared the sketching activity and sketched output of pairs of design students collaborating face-to-face with other pairs linked by computer mediated tools. The paper proposes that attention to the nature and dispersion of 'graphic acts' can lead to a better understanding of the exploitation of sketching between remotely located design participants. Sketch Graphic Acts (SGAs) are used to illuminate the phenomenon of sh...

  6. The Teaching of Graphics and Design.

    Science.gov (United States)

    Sullivan, Paul W.

    This paper describes four journalism courses designed to develop students' visual sense and then channel that sense into the field of advertising. "Visual Communication" is a basic course in the elements of design which attempts to demonstrate to students that there are rules and order which comprise good design. "Publication…

  7. The use of interpractive graphic displays for interpretation of surface design parameters

    Science.gov (United States)

    Talcott, N. A., Jr.

    1981-01-01

    An interactive computer graphics technique known as the Graphic Display Data method has been developed to provide a convenient means for rapidly interpreting large amounts of surface design data. The display technique should prove valuable in such disciplines as aerodynamic analysis, structural analysis, and experimental data analysis. To demonstrate the system's features, an example is presented of the Graphic Data Display method used as an interpretive tool for radiation equilibrium temperature distributions over the surface of an aerodynamic vehicle. Color graphic displays were also examined as a logical extension of the technique to improve its clarity and to allow the presentation of greater detail in a single display.

  8. Characterizing chemical systems with on-line computers and graphics

    International Nuclear Information System (INIS)

    Frazer, J.W.; Rigdon, L.P.; Brand, H.R.; Pomernacki, C.L.

    1979-01-01

    Incorporating computers and graphics on-line to chemical experiments and processes opens up new opportunities for the study and control of complex systems. Systems having many variables can be characterized even when the variable interactions are nonlinear, and the system cannot a priori be represented by numerical methods and models. That is, large sets of accurate data can be rapidly acquired, then modeling and graphic techniques can be used to obtain partial interpretation plus design of further experimentation. The experimenter can thus comparatively quickly iterate between experimentation and modeling to obtain a final solution. We have designed and characterized a versatile computer-controlled apparatus for chemical research, which incorporates on-line instrumentation and graphics. It can be used to determine the mechanism of enzyme-induced reactions or to optimize analytical methods. The apparatus can also be operated as a pilot plant to design control strategies. On-line graphics were used to display conventional plots used by biochemists and three-dimensional response-surface plots

  9. The Use of Computer Graphics in the Design Process.

    Science.gov (United States)

    Palazzi, Maria

    This master's thesis examines applications of computer technology to the field of industrial design and ways in which technology can transform the traditional process. Following a statement of the problem, the history and applications of the fields of computer graphics and industrial design are reviewed. The traditional industrial design process…

  10. An application of interactive computer graphics technology to the design of dispersal mechanisms

    Science.gov (United States)

    Richter, B. J.; Welch, B. H.

    1977-01-01

    Interactive computer graphics technology is combined with a general purpose mechanisms computer code to study the operational behavior of three guided bomb dispersal mechanism designs. These studies illustrate the use of computer graphics techniques to discover operational anomalies, to assess the effectiveness of design improvements, to reduce the time and cost of the modeling effort, and to provide the mechanism designer with a visual understanding of the physical operation of such systems.

  11. Engineering graphic modelling a workbook for design engineers

    CERN Document Server

    Tjalve, E; Frackmann Schmidt, F

    2013-01-01

    Engineering Graphic Modelling: A Practical Guide to Drawing and Design covers how engineering drawing relates to the design activity. The book describes modeled properties, such as the function, structure, form, material, dimension, and surface, as well as the coordinates, symbols, and types of projection of the drawing code. The text provides drawing techniques, such as freehand sketching, bold freehand drawing, drawing with a straightedge, a draughting machine or a plotter, and use of templates, and then describes the types of drawing. Graphic designers, design engineers, mechanical engine

  12. A graphical user-interface control system at SRRC

    International Nuclear Information System (INIS)

    Chen, J.S.; Wang, C.J.; Chen, S.J.; Jan, G.J.

    1993-01-01

    A graphical user interface control system of 1.3 GeV synchrotron radiation light source was designed and implemented for the beam transport line (BTL) and storage ring (SR). A modern control technique has been used to implement and control the third generation synchrotron light source. Two level computer hardware configuration, that includes process and console computers as a top level and VME based intelligent local controller as a bottom level, was setup and tested. Both level computers are linked by high speed Ethernet data communication network. A database includes static and dynamic databases as well as access routines were developed. In order to commission and operate the machine friendly, the graphical man machine interface was designed and coded. The graphical user interface (GUI) software was installed on VAX workstations for the BTL and SR at the Synchrotron Radiation Research Center (SRRC). The over all performance has been evaluated at 10Hz update rate. The results showed that the graphical operator interface control system is versatile system and can be implemented into the control system of the accelerator. It will provide the tool to control and monitor the equipments of the radiation light source especially for machine commissioning and operation

  13. Cereal Box Design: An Interdisciplinary Graphics Activity

    Science.gov (United States)

    Fitzgerald, Mike; Tsosie, Teri

    2012-01-01

    The cereal box design activity is intriguing both for its simplicity and the resourcefulness that it can generate in young people. Also, it lends itself to a variety of curriculums. It covers both consumerism and Design for the Environment (DfE) concepts broadly and in depth. The activity introduces a wide range of topics. They include graphic…

  14. Interactive Graphics Analysis for Aircraft Design

    Science.gov (United States)

    Townsend, J. C.

    1983-01-01

    Program uses higher-order far field drag minimization. Computer program WDES WDEM preliminary aerodynamic design tool for one or two interacting, subsonic lifting surfaces. Subcritical wing design code employs higher-order far-field drag minimization technique. Linearized aerodynamic theory used. Program written in FORTRAN IV.

  15. Selecting personnel to work on the interactive graphics system

    International Nuclear Information System (INIS)

    Norton, F.J.

    1979-01-01

    The paper established criteria for the selection of personnel to work on the interactive graphics system and mentions some of human behavioral patterns that are created by the implementation of graphic systems. Some of the social and educational problems associated with the interactive graphics system will be discussed. The project also provided for collecting objective data which would be useful in assessing the benefits of interactive graphics systems

  16. Selecting personnel to work on the interactive graphics system

    Energy Technology Data Exchange (ETDEWEB)

    Norton, F.J.

    1979-11-30

    The paper established criteria for the selection of personnel to work on the interactive graphics system and mentions some of human behavioral patterns that are created by the implementation of graphic systems. Some of the social and educational problems associated with the interactive graphics system will be discussed. The project also provided for collecting objective data which would be useful in assessing the benefits of interactive graphics systems.

  17. Engineering graphics theoretical foundations of engineering geometry for design

    CERN Document Server

    Brailov, Aleksandr Yurievich

    2016-01-01

    This professional treatise on engineering graphics emphasizes engineering geometry as the theoretical foundation for communication of design ideas with real world structures and products. It considers each theoretical notion of engineering geometry as a complex solution of direct- and inverse-problems of descriptive geometry and each solution of basic engineering problems presented is accompanied by construction of biunique two- and three-dimension models of geometrical images. The book explains the universal structure of formal algorithms of the solutions of positional, metric, and axonometric problems, as well as the solutions of problems of construction in developing a curvilinear surface. The book further characterizes and explains the added laws of projective connections to facilitate construction of geometrical images in any of eight octants. Laws of projective connections allow constructing the complex drawing of a geometrical image in the American system of measurement and the European system of measu...

  18. Toolkit Design for Interactive Structured Graphics

    National Research Council Canada - National Science Library

    Bederson, Benjamin B; Grosjean, Jesse; Meyer, Jon

    2003-01-01

    .... We compare hand-crafted custom code to polylithic and monolithic toolkit-based solutions. Polylithic toolkits follow a design philosophy similar to 3D scene graphs supported by toolkits including Java3D and OpenInventor...

  19. Three-dimensional integrated CAE system applying computer graphic technique

    International Nuclear Information System (INIS)

    Kato, Toshisada; Tanaka, Kazuo; Akitomo, Norio; Obata, Tokayasu.

    1991-01-01

    A three-dimensional CAE system for nuclear power plant design is presented. This system utilizes high-speed computer graphic techniques for the plant design review, and an integrated engineering database for handling the large amount of nuclear power plant engineering data in a unified data format. Applying this system makes it possible to construct a nuclear power plant using only computer data from the basic design phase to the manufacturing phase, and it increases the productivity and reliability of the nuclear power plants. (author)

  20. The graphics software of the Saclay linear accelerator control system

    International Nuclear Information System (INIS)

    Gournay, J.F.

    1987-06-01

    The Control system of the Saclay Linear Accelerator is based upon modern technology hardware. In the graphic software, pictures are created in exactly the same manner for all the graphic devices supported by the system. The informations used to draw a picture are stored in an array called a graphic segment. Three output primitives are used to add graphic material in a segment. Three coordinate systems are defined

  1. Living Color Frame System: PC graphics tool for data visualization

    Science.gov (United States)

    Truong, Long V.

    1993-01-01

    Living Color Frame System (LCFS) is a personal computer software tool for generating real-time graphics applications. It is highly applicable for a wide range of data visualization in virtual environment applications. Engineers often use computer graphics to enhance the interpretation of data under observation. These graphics become more complicated when 'run time' animations are required, such as found in many typical modern artificial intelligence and expert systems. Living Color Frame System solves many of these real-time graphics problems.

  2. Graphic design of Japanese university symbols

    Directory of Open Access Journals (Sweden)

    Vorobyeva T. U.

    2016-08-01

    Full Text Available this article uses a semiotic and visual-cultural analysis of the Japanese leading universities branding. It is shown that the design of a corporate style of universities in Japan has historical roots and serves as the basis of the brand of the university as well as Japan in whole.

  3. Integrating Surface Modeling into the Engineering Design Graphics Curriculum

    Science.gov (United States)

    Hartman, Nathan W.

    2006-01-01

    It has been suggested there is a knowledge base that surrounds the use of 3D modeling within the engineering design process and correspondingly within engineering design graphics education. While solid modeling receives a great deal of attention and discussion relative to curriculum efforts, and rightly so, surface modeling is an equally viable 3D…

  4. Implementing Project Based Learning Approach to Graphic Design Course

    Science.gov (United States)

    Riyanti, Menul Teguh; Erwin, Tuti Nuriah; Suriani, S. H.

    2017-01-01

    The purpose of this study was to develop a learning model based Commercial Graphic Design Drafting project-based learning approach, was chosen as a strategy in the learning product development research. University students as the target audience of this model are the students of the fifth semester Visual Communications Design Studies Program…

  5. RXY/DRXY-a postprocessing graphical system for scientific computation

    International Nuclear Information System (INIS)

    Jin Qijie

    1990-01-01

    Scientific computing require computer graphical function for its visualization. The developing objects and functions of a postprocessing graphical system for scientific computation are described, and also briefly described its implementation

  6. Transforming Graphical System Models To Graphical Attack Models

    NARCIS (Netherlands)

    Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, René Rydhof; Kammüller, Florian; Mauw, S.; Kordy, B.

    2015-01-01

    Manually identifying possible attacks on an organisation is a complex undertaking; many different factors must be considered, and the resulting attack scenarios can be complex and hard to maintain as the organisation changes. System models provide a systematic representation of organisations that

  7. Graphics Processing Units for HEP trigger systems

    International Nuclear Information System (INIS)

    Ammendola, R.; Bauce, M.; Biagioni, A.; Chiozzi, S.; Cotta Ramusino, A.; Fantechi, R.; Fiorini, M.; Giagu, S.; Gianoli, A.; Lamanna, G.; Lonardo, A.; Messina, A.

    2016-01-01

    General-purpose computing on GPUs (Graphics Processing Units) is emerging as a new paradigm in several fields of science, although so far applications have been tailored to the specific strengths of such devices as accelerator in offline computation. With the steady reduction of GPU latencies, and the increase in link and memory throughput, the use of such devices for real-time applications in high-energy physics data acquisition and trigger systems is becoming ripe. We will discuss the use of online parallel computing on GPU for synchronous low level trigger, focusing on CERN NA62 experiment trigger system. The use of GPU in higher level trigger system is also briefly considered.

  8. Graphics Processing Units for HEP trigger systems

    Energy Technology Data Exchange (ETDEWEB)

    Ammendola, R. [INFN Sezione di Roma “Tor Vergata”, Via della Ricerca Scientifica 1, 00133 Roma (Italy); Bauce, M. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); University of Rome “La Sapienza”, P.lee A.Moro 2, 00185 Roma (Italy); Biagioni, A. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); Chiozzi, S.; Cotta Ramusino, A. [INFN Sezione di Ferrara, Via Saragat 1, 44122 Ferrara (Italy); University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy); Fantechi, R. [INFN Sezione di Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); CERN, Geneve (Switzerland); Fiorini, M. [INFN Sezione di Ferrara, Via Saragat 1, 44122 Ferrara (Italy); University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy); Giagu, S. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); University of Rome “La Sapienza”, P.lee A.Moro 2, 00185 Roma (Italy); Gianoli, A. [INFN Sezione di Ferrara, Via Saragat 1, 44122 Ferrara (Italy); University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy); Lamanna, G., E-mail: gianluca.lamanna@cern.ch [INFN Sezione di Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN Laboratori Nazionali di Frascati, Via Enrico Fermi 40, 00044 Frascati (Roma) (Italy); Lonardo, A. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); Messina, A. [INFN Sezione di Roma “La Sapienza”, P.le A. Moro 2, 00185 Roma (Italy); University of Rome “La Sapienza”, P.lee A.Moro 2, 00185 Roma (Italy); and others

    2016-07-11

    General-purpose computing on GPUs (Graphics Processing Units) is emerging as a new paradigm in several fields of science, although so far applications have been tailored to the specific strengths of such devices as accelerator in offline computation. With the steady reduction of GPU latencies, and the increase in link and memory throughput, the use of such devices for real-time applications in high-energy physics data acquisition and trigger systems is becoming ripe. We will discuss the use of online parallel computing on GPU for synchronous low level trigger, focusing on CERN NA62 experiment trigger system. The use of GPU in higher level trigger system is also briefly considered.

  9. Graphical analysis of power systems for mobile robotics

    Science.gov (United States)

    Raade, Justin William

    The field of mobile robotics places stringent demands on the power system. Energetic autonomy, or the ability to function for a useful operation time independent of any tether, refueling, or recharging, is a driving force in a robot designed for a field application. The focus of this dissertation is the development of two graphical analysis tools, namely Ragone plots and optimal hybridization plots, for the design of human scale mobile robotic power systems. These tools contribute to the intuitive understanding of the performance of a power system and expand the toolbox of the design engineer. Ragone plots are useful for graphically comparing the merits of different power systems for a wide range of operation times. They plot the specific power versus the specific energy of a system on logarithmic scales. The driving equations in the creation of a Ragone plot are derived in terms of several important system parameters. Trends at extreme operation times (both very short and very long) are examined. Ragone plot analysis is applied to the design of several power systems for high-power human exoskeletons. Power systems examined include a monopropellant-powered free piston hydraulic pump, a gasoline-powered internal combustion engine with hydraulic actuators, and a fuel cell with electric actuators. Hybrid power systems consist of two or more distinct energy sources that are used together to meet a single load. They can often outperform non-hybrid power systems in low duty-cycle applications or those with widely varying load profiles and long operation times. Two types of energy sources are defined: engine-like and capacitive. The hybridization rules for different combinations of energy sources are derived using graphical plots of hybrid power system mass versus the primary system power. Optimal hybridization analysis is applied to several power systems for low-power human exoskeletons. Hybrid power systems examined include a fuel cell and a solar panel coupled with

  10. Seeing is believing: good graphic design principles for medical research.

    Science.gov (United States)

    Duke, Susan P; Bancken, Fabrice; Crowe, Brenda; Soukup, Mat; Botsis, Taxiarchis; Forshee, Richard

    2015-09-30

    Have you noticed when you browse a book, journal, study report, or product label how your eye is drawn to figures more than to words and tables? Statistical graphs are powerful ways to transparently and succinctly communicate the key points of medical research. Furthermore, the graphic design itself adds to the clarity of the messages in the data. The goal of this paper is to provide a mechanism for selecting the appropriate graph to thoughtfully construct quality deliverables using good graphic design principles. Examples are motivated by the efforts of a Safety Graphics Working Group that consisted of scientists from the pharmaceutical industry, Food and Drug Administration, and academic institutions. Copyright © 2015 John Wiley & Sons, Ltd.

  11. SUIS: An Online Graphical Signature-Based User Identification System

    OpenAIRE

    Alam, Shahid

    2016-01-01

    Humans possess a large amount of, and almost limitless, visual memory, that assists them to remember pictures far better than words. This phenomenon has recently motivated the computer security researchers' in academia and industry to design and develop graphical user identification systems (GUISs). Cognometric GUISs are more memorable than drawmetric GUISs, but takes more time to authenticate. None of the previously proposed GUISs combines the advantages of both cognometric and drawmetric sy...

  12. Interactive graphics analysis system for nuclear engineering applications

    International Nuclear Information System (INIS)

    Danchak, M.; Moyer, W.R.; Becker, M.

    1973-01-01

    From working with continuous slowing down theory, the need was recognized for a system which allowed rapid calculation of the theoretical flux, instant comparison with experiment and a simple means of iterating on the slowing down parameters to force flux agreement and reflect cross section modification. Similar requirements exist in other areas of nuclear work for streamlining and simplifying the data analysis process. As a solution, a unique interactive graphics analysis system (RIGAS) was devised to allow a user to calculate, display, compare, manipulate and modify his data without requiring any programming on his part. This was accomplished by establishing human primacy, through extensive human factor considerations, and designing a man-machine dialogue which responds to the mere push of a button. This system results in an instrument which maximizes man's decision making capability and the computer's speed to improve graphic communication and data analysis. (14 figs) (U.S.)

  13. The Graphics of Communication: Typography--Layout--Design. Third Edition.

    Science.gov (United States)

    Turnbull, Arthur T.; Baird, Russell N.

    This book includes detailed explanations of the latest technological innovations as well as discussions of the theoretical bases of visual communication. The six sections of the book focus on the following: the theoretical aspects of graphic communication; the verbal elements of communication; the visual elements of communication; design, the…

  14. GRAPHIC, time-sharing magnet design computer programs at Argonne

    International Nuclear Information System (INIS)

    Lari, R.J.

    1974-01-01

    This paper describes three magnet design computer programs in use at the Zero Gradient Synchrotron of Argonne National Laboratory. These programs are used in the time sharing mode in conjunction with a Tektronix model 4012 graphic display terminal. The first program in called TRIM, the second MAGNET, and the third GFUN. (U.S.)

  15. Circumventing Graphical User Interfaces in Chemical Engineering Plant Design

    Science.gov (United States)

    Romey, Noel; Schwartz, Rachel M.; Behrend, Douglas; Miao, Peter; Cheung, H. Michael; Beitle, Robert

    2007-01-01

    Graphical User Interfaces (GUIs) are pervasive elements of most modern technical software and represent a convenient tool for student instruction. For example, GUIs are used for [chemical] process design software (e.g., CHEMCAD, PRO/II and ASPEN) typically encountered in the senior capstone course. Drag and drop aspects of GUIs are challenging for…

  16. Technological Evolution and its Effects on Graphic Design and Textbook Design

    OpenAIRE

    Allen, Danielle Renae

    2012-01-01

    Technological Evolution and its Effects on Graphic Design and Textbook Design Although fundamental principles of art and design have been around for thousands of years, the development of new technology has greatly altered how designers must use these foundations. This paper investigates how this complex history has changed graphic design practices and specifically the design of textbooks. It also discusses technology’s huge role in changing the way design fundamentals are taught and practice...

  17. Pictorial Visual Rotation Ability of Engineering Design Graphics Students

    Science.gov (United States)

    Ernst, Jeremy Vaughn; Lane, Diarmaid; Clark, Aaron C.

    2015-01-01

    The ability to rotate visual mental images is a complex cognitive skill. It requires the building of graphical libraries of information through short or long term memory systems and the subsequent retrieval and manipulation of these towards a specified goal. The development of mental rotation skill is of critical importance within engineering…

  18. Design Application Translates 2-D Graphics to 3-D Surfaces

    Science.gov (United States)

    2007-01-01

    Fabric Images Inc., specializing in the printing and manufacturing of fabric tension architecture for the retail, museum, and exhibit/tradeshow communities, designed software to translate 2-D graphics for 3-D surfaces prior to print production. Fabric Images' fabric-flattening design process models a 3-D surface based on computer-aided design (CAD) specifications. The surface geometry of the model is used to form a 2-D template, similar to a flattening process developed by NASA's Glenn Research Center. This template or pattern is then applied in the development of a 2-D graphic layout. Benefits of this process include 11.5 percent time savings per project, less material wasted, and the ability to improve upon graphic techniques and offer new design services. Partners include Exhibitgroup/Giltspur (end-user client: TAC Air, a division of Truman Arnold Companies Inc.), Jack Morton Worldwide (end-user client: Nickelodeon), as well as 3D Exhibits Inc., and MG Design Associates Corp.

  19. Practical Steps to Android App Development for Graphic Designers

    OpenAIRE

    Antikainen, Vesa

    2014-01-01

    The purpose of this thesis is to give graphic designers new to Android a clear view of what goes into developing an app. First all the basics of the Android OS are introduced with building blocks and concepts needed to get started. After introducing the fundamental elements, the thesis provides some recommendations on what programs could be used and how the overall workflow should go. In the final part previously mentioned building blocks and workflow patterns are put to use in the exampl...

  20. Graphic Design: History in the Writing 1983-2011

    OpenAIRE

    Thorel, Benjamin

    2012-01-01

    Catalogue d’une imposante exposition co-organisée par le Walker Art Center de Minneapolis, et le National Design Museum Cooper-Hewitt de New York, Graphic Design : Now in Production ambitionne de cartographier les territoires du design graphique contemporain dans son acception la plus large possible. Identité visuelle, magazines, posters, typographie, webdesign ou génériques de film sont abordés dans cet ouvrage particulièrement dense. Des planches illustrées, agrémentées de commentaires, ren...

  1. A Theoretical Analysis of Learning with Graphics--Implications for Computer Graphics Design.

    Science.gov (United States)

    ChanLin, Lih-Juan

    This paper reviews the literature pertinent to learning with graphics. The dual coding theory provides explanation about how graphics are stored and precessed in semantic memory. The level of processing theory suggests how graphics can be employed in learning to encourage deeper processing. In addition to dual coding theory and level of processing…

  2. Designing a Visual Factors-Based Screen Display Interface: The New Role of the Graphic Technologist.

    Science.gov (United States)

    Faiola, Tony; DeBloois, Michael L.

    1988-01-01

    Discusses the role of the graphic technologist in preparing computer screen displays for interactive videodisc systems, and suggests screen design guidelines. Topics discussed include the grid system; typography; visual factors research; color; course mobility through branching and software menus; and a model of course integration. (22 references)…

  3. A review of currently available high performance interactive graphics systems

    International Nuclear Information System (INIS)

    Clark, S.A.; Harvey, J.

    1981-12-01

    A survey of several interactive graphics systems is given, all but one of which being based on calligraphic technology, which are being considered for a new High Energy Physics graphics facility at RAL. A brief outline of the system architectures is given, the detailed features being summarised in an appendix, and their relative merits are discussed. (U.K.)

  4. Optimizing the design of preprinted orders for ambulatory chemotherapy: combining oncology, human factors, and graphic design.

    Science.gov (United States)

    Jeon, Jennifer; White, Rachel E; Hunt, Richard G; Cassano-Piché, Andrea L; Easty, Anthony C

    2012-03-01

    To establish a set of guidelines for developing ambulatory chemotherapy preprinted orders. Multiple methods were used to develop the preprinted order guidelines. These included (A) a comprehensive literature review and an environmental scan; (B) analyses of field study observations and incident reports; (C) critical review of evidence from the literature and the field study observation analyses; (D) review of the draft guidelines by a clinical advisory group; and (E) collaboration with graphic designers to develop sample preprinted orders, refine the design guidelines, and format the resulting content. The Guidelines for Developing Ambulatory Chemotherapy Preprinted Orders, which consist of guidance on the design process, content, and graphic design elements of ambulatory chemotherapy preprinted orders, have been established. Health care is a safety critical, dynamic, and complex sociotechnical system. Identifying safety risks in such a system and effectively addressing them often require the expertise of multiple disciplines. This study illustrates how human factors professionals, clinicians, and designers can leverage each other's expertise to uncover commonly overlooked patient safety hazards and to provide health care professionals with innovative, practical, and user-centered tools to minimize those hazards.

  5. Daylighting Design in Classroom Based on Yearly-Graphic Analysis

    Directory of Open Access Journals (Sweden)

    Yang Guan

    2016-07-01

    Full Text Available In China, existing buildings comprise more than 40 billion square meters, most being of high energy consumption. A substantial reduction in electrical energy costs could be obtained through greater use of daylight. Daylight varies widely due to the movement of sun, changing seasons and diverse weather conditions. Custom static daylight assessments, simulations represent only one time of the year or one time of the day, are inadequate to evaluate the dynamics of daylight variability. Using the intuitive graphic tool Temporal Map to display the annual daylight data, this study compared different passive architectural design strategies under the climate conditions of five representative Chinese cities and selected the most suitable design scheme for each city. In this study, the dynamic yearly-graphic tool was utilized for architectural design in China, and we integrated the optimal design with the Chinese academic calendar to achieve improvements within the occupancy time. This modified map connects design work with human activity that makes daylight evaluation more accurate and efficient. The results of this study will provide preliminary recommendations for energy-saving design in China, and reference to other similar studies.

  6. Internet-based hardware/software co-design framework for embedded 3D graphics applications

    Directory of Open Access Journals (Sweden)

    Wong Weng-Fai

    2011-01-01

    Full Text Available Abstract Advances in technology are making it possible to run three-dimensional (3D graphics applications on embedded and handheld devices. In this article, we propose a hardware/software co-design environment for 3D graphics application development that includes the 3D graphics software, OpenGL ES application programming interface (API, device driver, and 3D graphics hardware simulators. We developed a 3D graphics system-on-a-chip (SoC accelerator using transaction-level modeling (TLM. This gives software designers early access to the hardware even before it is ready. On the other hand, hardware designers also stand to gain from the more complex test benches made available in the software for verification. A unique aspect of our framework is that it allows hardware and software designers from geographically dispersed areas to cooperate and work on the same framework. Designs can be entered and executed from anywhere in the world without full access to the entire framework, which may include proprietary components. This results in controlled and secure transparency and reproducibility, granting leveled access to users of various roles.

  7. Designing Raster Cells as the Basis for Developing Personal Graphic Language

    Directory of Open Access Journals (Sweden)

    Jana Z. Vujić

    2011-05-01

    Full Text Available Continuous work in creating new designer solutions points towards the need to create personal routines as personalcommunication in the relation comprising design, algorithms, and original computer graphics. This paper showsprocedures for developing a control language for creating graphic designs with individual raster elements (screeningelement obtaint by halftoning. Personal commands should set routines in a language understood by the printer andthe designer. The PostScript basis is used because we mix vector and pixel graphics in the same program stream, aswell as different colour systems, and our own raster forms. The printing raster is set with the target of special designmulti-use, and this includes the field of security graphics and art computer reproduction. Each raster form assumesmodifications, creating their raster family. The raster cell content is transformed with PostScript, allowing the settingof basic values, angle and liniature for each pixel separately. Raster cells are mixed in multi-colour graphics to thelevel of individual designs with variable values of parameters determining them.

  8. Representation stigma: Perceptions of tools and processes for design graphics

    Directory of Open Access Journals (Sweden)

    David Barbarash

    2016-12-01

    Full Text Available Practicing designers and design students across multiple fields were surveyed to measure preference and perception of traditional hand and digital tools to determine if common biases for an individual toolset are realized in practice. Significant results were found, primarily with age being a determinant in preference of graphic tools and processes; this finding demonstrates a hard line between generations of designers. Results show that while there are strong opinions in tools and processes, the realities of modern business practice and production gravitate towards digital methods despite a traditional tool preference in more experienced designers. While negative stigmas regarding computers remain, younger generations are more accepting of digital tools and images, which should eventually lead to a paradigm shift in design professions.

  9. Development of a graphical user interface and graphics display for the WIND system

    International Nuclear Information System (INIS)

    O'Steen, B.L.; Fast, J.D.; Suire, B.S.

    1992-01-01

    An advanced graphical user interface (GUI) and improved graphics for transport calculations have been developed for the Weather Information and Display System (WINDS). Two WINDS transport codes, Area Evac and 2DPUF, have been ported from their original VAX/VMS environment to a UNIX operating system and reconfigured to take advantage of the new graphics capability. A developmental prototype of this software is now available on a UNIX based IBM 340 workstation in the Dose Assessment Center (DAC). Automatic transfer of meteorological data from the WINDS VAX computers to the IBM workstation in the DAC has been implemented. This includes both regional National Weather Service (NWS) data and SRS tower data. The above developments fulfill a FY 1993 DOE milestone

  10. A Symbolic and Graphical Computer Representation of Dynamical Systems

    Science.gov (United States)

    Gould, Laurence I.

    2005-04-01

    AUTONO is a Macsyma/Maxima program, designed at the University of Hartford, for solving autonomous systems of differential equations as well as for relating Lagrangians and Hamiltonians to their associated dynamical equations. AUTONO can be used in a number of fields to decipher a variety of complex dynamical systems with ease, producing their Lagrangian and Hamiltonian equations in seconds. These equations can then be incorporated into VisSim, a modeling and simulation program, which yields graphical representations of motion in a given system through easily chosen input parameters. The program, along with the VisSim differential-equations graphical package, allows for resolution and easy understanding of complex problems in a relatively short time; thus enabling quicker and more advanced computing of dynamical systems on any number of platforms---from a network of sensors on a space probe, to the behavior of neural networks, to the effects of an electromagnetic field on components in a dynamical system. A flowchart of AUTONO, along with some simple applications and VisSim output, will be shown.

  11. SBOL Visual: A Graphical Language for Genetic Designs

    Science.gov (United States)

    Adler, Aaron; Beal, Jacob; Bhatia, Swapnil; Cai, Yizhi; Chen, Joanna; Clancy, Kevin; Galdzicki, Michal; Hillson, Nathan J.; Le Novère, Nicolas; Maheshwari, Akshay J.; McLaughlin, James Alastair; Myers, Chris J.; P, Umesh; Pocock, Matthew; Rodriguez, Cesar; Soldatova, Larisa; Stan, Guy-Bart V.; Swainston, Neil; Wipat, Anil; Sauro, Herbert M.

    2015-01-01

    Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. It consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual. PMID:26633141

  12. Graphic Design for the Computer Age; Visual Communication for all Media.

    Science.gov (United States)

    Hamilton, Edward A.

    Because of the rapid pace of today's world, graphic designs which communicate at a glance are needed in all information areas. The essays in this book deal with various aspects of graphic design. These brief essays, each illustrated with graphics, concern the following topics: a short history of visual communication, information design, the merits…

  13. Managing Heuristics as a Method of Inquiry in Autobiographical Graphic Design Theses

    Science.gov (United States)

    Ings, Welby

    2011-01-01

    This article draws on case studies undertaken in postgraduate research at AUT University, Auckland. It seeks to address a number of issues related to heuristic inquiries employed by graphic design students who use autobiographical approaches when developing research-based theses. For this type of thesis, heuristics as a system of inquiry may…

  14. Some research advances in computer graphics that will enhance applications to engineering design

    Science.gov (United States)

    Allan, J. J., III

    1975-01-01

    Research in man/machine interactions and graphics hardware/software that will enhance applications to engineering design was described. Research aspects of executive systems, command languages, and networking used in the computer applications laboratory are mentioned. Finally, a few areas where little or no research is being done were identified.

  15. Knowledge based development of graphic display systems

    International Nuclear Information System (INIS)

    Woods, D.D.

    1985-01-01

    Most human factors guidelines on computer display design attempt to ensure that human sensory limits are not strained or that users can potentially access data. While this is a necessary and too often an overlooked step in interface design, it does not address issues about how to use computer displays to aid human performance at domain tasks. This challenge to human factors guidance is particularly acute in complex environments such as nuclear power plants where the goal is more than a useable interface system; the interface must support effective human performance at tasks like situation assessment, fault management, problem solving and planning. Studies of human performance in complex domains reveal that human-machine performance failures can often be linked to problems in information handling - data overload, getting lost, keyhole effects, tunnel vision to name but a few. All of these information handling problems represent manifestations of an inability to find, integrate or interpret the ''right'' data at the ''right'' time, i.e., failures where critical information is not detected among the ambient data load, where critical information is not assembled from data distributed over time or over space; and where critical information is not looked for because of misunderstandings or erroneous assumptions (cf., Woods, 1985). Problems of this kind illustrate that the potential to see, read, or access data does not guarantee successful user information extraction. The result is a need for research and guidance on design for enhanced information extraction in addition to design for data availability

  16. Design and globalization can graphic design in mass communication inspire a global culture?

    OpenAIRE

    Nguyen, V. (V.); Prebys, C. (C.)

    2010-01-01

    In this paper I deliver four points which support my assertion that graphic design in mass communication can inspire a global culture informed by Christianity. First, I argue that the environment in which people consistently find themselves will over time influence and affect the interior dispositions of the person, and when occurring in great numbers, the culture. I argue for the importance of graphic design as a vital component in the development of culture and how as visual ...

  17. Applying Semiotic Theories to Graphic Design Education: An Empirical Study on Poster Design Teaching

    Science.gov (United States)

    Yang, Chao-Ming; Hsu, Tzu-Fan

    2015-01-01

    The rationales behind design are dissimilar to those behind art. Establishing an adequate theoretical foundation for conducting design education can facilitate scientising design methods. Thus, from the perspectives of the semiotic theories proposed by Saussure and Peirce, we investigated graphic design curricula by performing teaching…

  18. The Use of a Parametric Feature Based CAD System to Teach Introductory Engineering Graphics.

    Science.gov (United States)

    Howell, Steven K.

    1995-01-01

    Describes the use of a parametric-feature-based computer-aided design (CAD) System, AutoCAD Designer, in teaching concepts of three dimensional geometrical modeling and design. Allows engineering graphics to go beyond the role of documentation and communication and allows an engineer to actually build a virtual prototype of a design idea and…

  19. Evaluating comfort with varying temperatures: a graphic design tool

    Energy Technology Data Exchange (ETDEWEB)

    Evans, J.M. [Research Centre Habitat and Energy, Faculty of Architecture, Design and Urbanism, University of Buenos Aires, Ciudad Universitaria (Argentina)

    2002-07-01

    This paper considers the need to define comfort of indoor and outdoor spaces in relation to the daily variations of temperature. A graphical tool is presented, which indicates the daily swings of temperature, shown as a single point on a graph representing the average temperature and the maximum temperature swing. This point can be compared with the comfort zones for different activity levels, such as sedentary activity, sleeping, indoor and outdoor circulation according to the design proposals for different spaces. The graph allows the representation of climatic variables, the definition of comfort zones, the selection of bio climatic design resources and the evaluation of indoor temperatures, measured in actual buildings or obtained from computer simulations. The development of the graph is explained and examples given with special emphasis on the use of thermal mass. (author)

  20. Hybrid compression of video with graphics in DTV communication systems

    OpenAIRE

    Schaar, van der, M.; With, de, P.H.N.

    2000-01-01

    Advanced broadcast manipulation of TV sequences and enhanced user interfaces for TV systems have resulted in an increased amount of pre- and post-editing of video sequences, where graphical information is inserted. However, in the current broadcasting chain, there are no provisions for enabling an efficient transmission/storage of these mixed video and graphics signals and, at this emerging stage of DTV systems, introducing new standards is not desired. Nevertheless, in the professional video...

  1. Spatial issues in user interface design from a graphic design perspective

    Science.gov (United States)

    Marcus, Aaron

    1989-01-01

    The user interface of a computer system is a visual display that provides information about the status of operations on data within the computer and control options to the user that enable adjustments to these operations. From the very beginning of computer technology the user interface was a spatial display, although its spatial features were not necessarily complex or explicitly recognized by the users. All text and nonverbal signs appeared in a virtual space generally thought of as a single flat plane of symbols. Current technology of high performance workstations permits any element of the display to appear as dynamic, multicolor, 3-D signs in a virtual 3-D space. The complexity of appearance and the user's interaction with the display provide significant challenges to the graphic designer of current and future user interfaces. In particular, spatial depiction provides many opportunities for effective communication of objects, structures, processes, navigation, selection, and manipulation. Issues are presented that are relevant to the graphic designer seeking to optimize the user interface's spatial attributes for effective visual communication.

  2. ATM Technology Demonstration-1 Phase II Boeing Configurable Graphical Display (CGD) Software Design Description

    Science.gov (United States)

    Wilber, George F.

    2017-01-01

    This Software Description Document (SDD) captures the design for developing the Flight Interval Management (FIM) system Configurable Graphics Display (CGD) software. Specifically this SDD describes aspects of the Boeing CGD software and the surrounding context and interfaces. It does not describe the Honeywell components of the CGD system. The SDD provides the system overview, architectural design, and detailed design with all the necessary information to implement the Boeing components of the CGD software and integrate them into the CGD subsystem within the larger FIM system. Overall system and CGD system-level requirements are derived from the CGD SRS (in turn derived from the Boeing System Requirements Design Document (SRDD)). Display and look-and-feel requirements are derived from Human Machine Interface (HMI) design documents and working group recommendations. This Boeing CGD SDD is required to support the upcoming Critical Design Review (CDR).

  3. THE CAPABILITIES USING OF THREE-DIMENSIONAL MODELING SYSTEM AUTOCAD IN TEACHING TO PERFORM GRAPHICS TASKS

    Directory of Open Access Journals (Sweden)

    A. V. Krasnyuk

    2008-03-01

    Full Text Available Three-dimensional design possibilities of the AutoCAD system for performing graphic tasks are presented in the article. On the basis of the studies conducted the features of application of computer-aided design system are noted and the methods allowing to decrease considerably the quantity of errors at making the drawings are offered.

  4. PRODUCTION TECHNICS AT GRAPHIC DESIGN EDUCATION AND THE NECCESSITY OF PREPARATION KNOWLEDGE OF PRE-PRINTING

    OpenAIRE

    CEYLAN, İbrahim Gökhan

    2015-01-01

    It is neccessary to teach the knowledge of production technics and pre-printing preparations besides the knowledge of developing creativity and aesthetic concerns in order to educate the designers to fullfill the needs of the sector totally at graphic design education. The printed materials prepared by the graphic designer should be evaluated in proper criterias ıf the materials are to be printed. Graphic designers should have the knowledge of the required knowledge of the area in order to me...

  5. Expert Graphics System Research in the Department of the Navy.

    Science.gov (United States)

    Duff, Jon M.

    1987-01-01

    Presents current trends in the development of expert systems within the Department of the Navy, particularly research into expert graphics systems intended to support the Authoring Instructional Methods (AIM) research project. Defines artificial intelligence and expert systems. Discusses the operations and functions of the Navy's intelligent…

  6. Reservation system with graphical user interface

    KAUST Repository

    Mohamed, Mahmoud A. Abdelhamid; Jamjoom, Hani T.; Podlaseck, Mark E.; Qu, Huiming; Shae, Zon-Yin; Sheopuri, Anshul

    2012-01-01

    Techniques for providing a reservation system are provided. The techniques include displaying a scalable visualization object, wherein the scalable visualization object comprises an expanded view element of the reservation system depicting

  7. ADL: a graphical design language for real time parallel applications

    NARCIS (Netherlands)

    M.R. van Steen; T. Vogel; A. ten Dam

    1993-01-01

    textabstractDesigning parallel applications is generally experienced as a tedious and difficult task, especially when hard real-time performance requirements have to be met. This paper discusses on-going work concerning the construction of a Design Entry System which supports the design phase of

  8. Reservation system with graphical user interface

    KAUST Repository

    Mohamed, Mahmoud A. Abdelhamid

    2012-01-05

    Techniques for providing a reservation system are provided. The techniques include displaying a scalable visualization object, wherein the scalable visualization object comprises an expanded view element of the reservation system depicting information in connection with a selected interval of time and a compressed view element of the reservation system depicting information in connection with one or more additional intervals of time, maintaining a visual context between the expanded view and the compressed view within the visualization object, and enabling a user to switch between the expanded view and the compressed view to facilitate use of the reservation system.

  9. Human factors engineering in the design of colour-graphic displays

    International Nuclear Information System (INIS)

    Fenton, E.F.

    1985-01-01

    The operator interface for Ontario Hydro's Darlington Nuclear Generating Station will rely extensively on the use of coloured graphic display formats. These are used for the presentation of both control and monitoring information. The displays are organized in a hierarchical relationship and a simple interactive selection method using light pens has been implemented. The application of human factors engineering principles has been a major factor in all aspects of the design. This paper describes the system and the human factors engineering function

  10. TIGER: A graphically interactive grid system for turbomachinery applications

    Science.gov (United States)

    Shih, Ming-Hsin; Soni, Bharat K.

    1992-01-01

    Numerical grid generation algorithm associated with the flow field about turbomachinery geometries is presented. Graphical user interface is developed with FORMS Library to create an interactive, user-friendly working environment. This customized algorithm reduces the man-hours required to generate a grid associated with turbomachinery geometry, as compared to the use of general-purpose grid generation softwares. Bezier curves are utilized both interactively and automatically to accomplish grid line smoothness and orthogonality. Graphical User Interactions are provided in the algorithm, allowing the user to design and manipulate the grid lines with a mouse.

  11. Bruno Munari and the invention of modern graphic design in Italy, 1928-1945

    NARCIS (Netherlands)

    Colizzi, Alessandro

    2011-01-01

    This study examines Bruno Munari’s work as a graphic designer from the late 1920s to mid-1940s, with the aim of understanding the emergence and characteristics of the modernist trend in Italian graphic design. Taking shape in Milan, an original ‘design culture’ eclectically brought together two

  12. AEROMETRIC INFORMATION RETRIEVAL SYSTEM (AIRS) - GRAPHICS

    Science.gov (United States)

    Aerometric Information Retrieval System (AIRS) is a computer-based repository of information about airborne pollution in the United States and various World Health Organization (WHO) member countries. AIRS is administered by the U.S. Environmental Protection Agency, and runs on t...

  13. Development of the spent fuel disassembling process by utilizing the 3D graphic design technology

    International Nuclear Information System (INIS)

    Song, T. K.; Lee, J. Y.; Kim, S. H.; Yun, J. S.

    2001-01-01

    For developing the spent fuel disassembling process, the 3D graphic simulation has been established by utilizing the 3D graphic design technology which is widely used in the industry. The spent fuel disassembling process consists of a downender, a rod extraction device, a rod cutting device, a pellet extracting device and a skeleton compaction device. In this study, the 3D graphical design model of these devices is implemented by conceptual design and established the virtual workcell within kinematics to motion of each device. By implementing this graphic simulation, all the unit process involved in the spent fuel disassembling processes are analyzed and optimized. The 3D graphical model and the 3D graphic simulation can be effectively used for designing the process equipment, as well as the optimized process and maintenance process

  14. A computer graphics system for visualizing spacecraft in orbit

    Science.gov (United States)

    Eyles, Don E.

    1989-01-01

    To carry out unanticipated operations with resources already in space is part of the rationale for a permanently manned space station in Earth orbit. The astronauts aboard a space station will require an on-board, spatial display tool to assist the planning and rehearsal of upcoming operations. Such a tool can also help astronauts to monitor and control such operations as they occur, especially in cases where first-hand visibility is not possible. A computer graphics visualization system designed for such an application and currently implemented as part of a ground-based simulation is described. The visualization system presents to the user the spatial information available in the spacecraft's computers by drawing a dynamic picture containing the planet Earth, the Sun, a star field, and up to two spacecraft. The point of view within the picture can be controlled by the user to obtain a number of specific visualization functions. The elements of the display, the methods used to control the display's point of view, and some of the ways in which the system can be used are described.

  15. Advancing satellite operations with intelligent graphical monitoring systems

    Science.gov (United States)

    Hughes, Peter M.; Shirah, Gregory W.; Luczak, Edward C.

    1993-01-01

    For nearly twenty-five years, spacecraft missions have been operated in essentially the same manner: human operators monitor displays filled with alphanumeric text watching for limit violations or other indicators that signal a problem. The task is performed predominately by humans. Only in recent years have graphical user interfaces and expert systems been accepted within the control center environment to help reduce operator workloads. Unfortunately, the development of these systems is often time consuming and costly. At the NASA Goddard Space Flight Center (GSFC), a new domain specific expert system development tool called the Generic Spacecraft Analyst Assistant (GenSAA) has been developed. Through the use of a highly graphical user interface and point-and-click operation, GenSAA facilitates the rapid, 'programming-free' construction of intelligent graphical monitoring systems to serve as real-time, fault-isolation assistants for spacecraft analysts. Although specifically developed to support real-time satellite monitoring, GenSAA can support the development of intelligent graphical monitoring systems in a variety of space and commercial applications.

  16. Graphical processors for HEP trigger systems

    International Nuclear Information System (INIS)

    Ammendola, R.; Biagioni, A.; Chiozzi, S.; Cotta Ramusino, A.; Di Lorenzo, S.; Fantechi, R.; Fiorini, M.; Frezza, O.; Lamanna, G.; Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Neri, I.; Paolucci, P.S.; Pastorelli, E.; Piandani, R.; Pontisso, L.; Rossetti, D.; Simula, F.; Sozzi, M.

    2017-01-01

    General-purpose computing on GPUs is emerging as a new paradigm in several fields of science, although so far applications have been tailored to employ GPUs as accelerators in offline computations. With the steady decrease of GPU latencies and the increase in link and memory throughputs, time is ripe for real-time applications using GPUs in high-energy physics data acquisition and trigger systems. We will discuss the use of online parallel computing on GPUs for synchronous low level trigger systems, focusing on tests performed on the trigger of the CERN NA62 experiment. Latencies of all components need analysing, networking being the most critical. To keep it under control, we envisioned NaNet, an FPGA-based PCIe Network Interface Card (NIC) enabling GPUDirect connection. Moreover, we discuss how specific trigger algorithms can be parallelised and thus benefit from a GPU implementation, in terms of increased execution speed. Such improvements are particularly relevant for the foreseen LHC luminosity upgrade where highly selective algorithms will be crucial to maintain sustainable trigger rates with very high pileup.

  17. Graphical processors for HEP trigger systems

    Energy Technology Data Exchange (ETDEWEB)

    Ammendola, R. [INFN Sezione di Roma Tor Vergata, Via della Ricerca Scientifica, 1, 00133 Roma (Italy); Biagioni, A. [INFN Sezione di Roma, P.le Aldo Moro, 2, 00185 Roma (Italy); Chiozzi, S.; Cotta Ramusino, A. [INFN Sezione di Ferrara, Via Saragat, 1, 44122 Ferrara (Italy); Di Lorenzo, S. [INFN Sezione di Pisa, L. Bruno Pontecorvo, 3, 56127 Pisa (Italy); Università di Pisa, Lungarno Pacinotti 43, 56126 Pisa (Italy); Fantechi, R. [INFN Sezione di Pisa, L. Bruno Pontecorvo, 3, 56127 Pisa (Italy); Fiorini, M. [INFN Sezione di Ferrara, Via Saragat, 1, 44122 Ferrara (Italy); Università di Ferrara, Via Ludovico Ariosto 35, 44121 Ferrara (Italy); Frezza, O. [INFN Sezione di Roma, P.le Aldo Moro, 2, 00185 Roma (Italy); Lamanna, G. [INFN, Laboratori Nazionali di Frascati (Italy); Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Neri, I.; Paolucci, P.S.; Pastorelli, E. [INFN Sezione di Roma, P.le Aldo Moro, 2, 00185 Roma (Italy); Piandani, R. [INFN Sezione di Pisa, L. Bruno Pontecorvo, 3, 56127 Pisa (Italy); Pontisso, L., E-mail: luca.pontisso@cern.ch [INFN Sezione di Pisa, L. Bruno Pontecorvo, 3, 56127 Pisa (Italy); Rossetti, D. [NVIDIA Corp., Santa Clara, CA (United States); Simula, F. [INFN Sezione di Roma, P.le Aldo Moro, 2, 00185 Roma (Italy); Sozzi, M. [INFN Sezione di Pisa, L. Bruno Pontecorvo, 3, 56127 Pisa (Italy); Università di Pisa, Lungarno Pacinotti 43, 56126 Pisa (Italy); and others

    2017-02-11

    General-purpose computing on GPUs is emerging as a new paradigm in several fields of science, although so far applications have been tailored to employ GPUs as accelerators in offline computations. With the steady decrease of GPU latencies and the increase in link and memory throughputs, time is ripe for real-time applications using GPUs in high-energy physics data acquisition and trigger systems. We will discuss the use of online parallel computing on GPUs for synchronous low level trigger systems, focusing on tests performed on the trigger of the CERN NA62 experiment. Latencies of all components need analysing, networking being the most critical. To keep it under control, we envisioned NaNet, an FPGA-based PCIe Network Interface Card (NIC) enabling GPUDirect connection. Moreover, we discuss how specific trigger algorithms can be parallelised and thus benefit from a GPU implementation, in terms of increased execution speed. Such improvements are particularly relevant for the foreseen LHC luminosity upgrade where highly selective algorithms will be crucial to maintain sustainable trigger rates with very high pileup.

  18. Using computer graphics to design Space Station Freedom viewing

    Science.gov (United States)

    Goldsberry, Betty S.; Lippert, Buddy O.; Mckee, Sandra D.; Lewis, James L., Jr.; Mount, Francis E.

    1993-01-01

    Viewing requirements were identified early in the Space Station Freedom program for both direct viewing via windows and indirect viewing via cameras and closed-circuit television (CCTV). These requirements reside in NASA Program Definition and Requirements Document (PDRD), Section 3: Space Station Systems Requirements. Currently, analyses are addressing the feasibility of direct and indirect viewing. The goal of these analyses is to determine the optimum locations for the windows, cameras, and CCTV's in order to meet established requirements, to adequately support space station assembly, and to operate on-board equipment. PLAID, a three-dimensional computer graphics program developed at NASA JSC, was selected for use as the major tool in these analyses. PLAID provides the capability to simulate the assembly of the station as well as to examine operations as the station evolves. This program has been used successfully as a tool to analyze general viewing conditions for many Space Shuttle elements and can be used for virtually all Space Station components. Additionally, PLAID provides the ability to integrate an anthropometric scale-modeled human (representing a crew member) with interior and exterior architecture.

  19. Graphical interface for PPDS system based on PAW

    International Nuclear Information System (INIS)

    Ivanov, V.V.; Stolyarskij, Yu.V.

    1992-01-01

    The program interface allowing to display graphically experimental measurements results and evaluations of various physical reactions parameters stored in the REACTIONS database of PPDS system is described. PAW package is used for experimental data visualization. 7 refs.; 2 figs.; 3 tabs

  20. Hybrid compression of video with graphics in DTV communication systems

    NARCIS (Netherlands)

    Schaar, van der M.; With, de P.H.N.

    2000-01-01

    Advanced broadcast manipulation of TV sequences and enhanced user interfaces for TV systems have resulted in an increased amount of pre- and post-editing of video sequences, where graphical information is inserted. However, in the current broadcasting chain, there are no provisions for enabling an

  1. Current Approaches to the Assessment of Graphic Design in a Higher Education Context

    Science.gov (United States)

    Giloi, Susan; du Toit, Pieter

    2013-01-01

    This article provides an overview of the current trends in assessment practice within the field of graphic design. The demands placed on educators to apply sound assessment practice for Higher Education subjects is as intense in the field of graphic design as in any other. Forcing the assessment of creative visual work into existing assessment…

  2. The Concurrent Engineering Design Paradigm Is Now Fully Functional for Graphics Education

    Science.gov (United States)

    Krueger, Thomas J.; Barr, Ronald E.

    2007-01-01

    Engineering design graphics education has come a long way in the past two decades. The emergence of solid geometric modeling technology has become the focal point for the graphical development of engineering design ideas. The main attraction of this 3-D modeling approach is the downstream application of the data base to analysis and…

  3. Interplay of Computer and Paper-Based Sketching in Graphic Design

    Science.gov (United States)

    Pan, Rui; Kuo, Shih-Ping; Strobel, Johannes

    2013-01-01

    The purpose of this study is to investigate student designers' attitude and choices towards the use of computers and paper sketches when involved in a graphic design process. 65 computer graphic technology undergraduates participated in this research. A mixed method study with survey and in-depth interviews was applied to answer the research…

  4. Interactive simulation of nuclear power systems using a dedicated minicomputer - computer graphics facility

    International Nuclear Information System (INIS)

    Tye, C.; Sezgen, A.O.

    1980-01-01

    The design of control systems and operational procedures for large scale nuclear power plant poses a difficult optimization problem requiring a lot of computational effort. Plant dynamic simulation using digital minicomputers offers the prospect of relatively low cost computing and when combined with graphical input/output provides a powerful tool for studying such problems. The paper discusses the results obtained from a simulation study carried out at the Computer Graphics Unit of the University of Manchester using a typical station control model for an Advanced Gas Cooled reactor. Particular reference is placed on the use of computer graphics for information display, parameter and control system optimization and techniques for using graphical input for defining and/or modifying the control system topology. Experience gained from this study has shown that a relatively modest minicomputer system can be used for simulating large scale dynamic systems and that highly interactive computer graphics can be used to advantage to relieve the designer of many of the tedious aspects of simulation leaving him free to concentrate on the more creative aspects of his work. (author)

  5. A Prototype Graphical User Interface for Co-op: A Group Decision Support System.

    Science.gov (United States)

    1992-03-01

    achieve their potential to communicate. Information-oriented, systematic graphic design is the use of typography , symbols, color, and other static and...apphcuittin by reducig Uber ellurt anid enhuncizig Iliteracti. ’Iliis thesis designs and de% elupht Itrututylle Graphical User Interface iGUl i fui Cu f...ORGANIZATION.... .. .. ............ II. INTERFACE DESIGN PRINCIPLES. .............. 7 A. GRAPHICAL USER INTERFACES.............7 1. Design Principles

  6. HIDiC - Design, Sensitivity and Graphical Representation

    DEFF Research Database (Denmark)

    Meyer, K.; Ianniciello, L.; Nielsen, J. E.

    2014-01-01

    We have explored the applicability of recent design methods based on H-xy diagrams for the HIDiC [i,ii] also for non-ideal and azeotropic systems. When applied together with sensitivity analysis and verification through rigorous simulations based on a newly developed and detailed HIDiC model......, these concepts widen the scope of HIDiC design of a larger range of industrially relevant separations....

  7. Design of Mariner 9 Science Sequences using Interactive Graphics Software

    Science.gov (United States)

    Freeman, J. E.; Sturms, F. M, Jr.; Webb, W. A.

    1973-01-01

    This paper discusses the analyst/computer system used to design the daily science sequences required to carry out the desired Mariner 9 science plan. The Mariner 9 computer environment, the development and capabilities of the science sequence design software, and the techniques followed in the daily mission operations are discussed. Included is a discussion of the overall mission operations organization and the individual components which played an essential role in the sequence design process. A summary of actual sequences processed, a discussion of problems encountered, and recommendations for future applications are given.

  8. Producing EGS4 shower displays with the Unified Graphics System

    International Nuclear Information System (INIS)

    Cowan, R.F.

    1990-01-01

    The EGS4 Code System has been coupled with the SLAC Unified Graphics System in such a manner as to provide a means for displaying showers on UGS77-supported devices. This is most easily accomplished by attaching an auxiliary subprogram package (SHOWGRAF) to existing EGS4 User Codes and making use of a graphics display or a post-processor code called EGS4PL. SHOWGRAF may be used to create shower displays directly on interactive IBM 5080 color display devices, supporting three-dimensional rotations, translations, and zoom features, and providing illustration of particle types and energies by color and/or intensity. Alternatively, SHOWGRAF may be used to record a two-dimensional projection of the shower in a device-independent graphics file. The EGS4PL post-processor may then be used to convert this file into device-dependent graphics code for any UGS77-supported device. Options exist within EGS4PL that allow for two-dimensional translations and zoom, for creating line structure to indicate particle types and energies, and for optional display of particles by type. All of this is facilitated by means of the command processor EGS4PL EXEC together with new options (5080 and PDEV) with the standard EGS4IN EXEC routine for running EGS4 interactively under VM/SP. 6 refs

  9. On line and on paper: Visual representations, visual culture, and computer graphics in design engineering

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, K.

    1991-01-01

    The research presented examines the visual communication practices of engineers and the impact of the implementation of computer graphics on their visual culture. The study is based on participant observation of day-to-day practices in two contemporary industrial settings among engineers engaged in the actual process of designing new pieces of technology. In addition, over thirty interviews were conducted at other industrial sites to confirm that the findings were not an isolated phenomenon. The data show that there is no one best way' to use a computer graphics system, but rather that use is site specific and firms and individuals engage in mixed paper and electronic practices as well as differential use of electronic options to get the job done. This research illustrates that rigid models which assume a linear theory of innovation, projecting a straight-forward process from idea, to drawing, to prototype, to production, are seriously misguided.

  10. Gamma camera image processing and graphical analysis mutual software system

    International Nuclear Information System (INIS)

    Wang Zhiqian; Chen Yongming; Ding Ailian; Ling Zhiye; Jin Yongjie

    1992-01-01

    GCCS gamma camera image processing and graphical analysis system is a special mutual software system. It is mainly used to analyse various patient data acquired from gamma camera. This system is used on IBM PC, PC/XT or PC/AT. It consists of several parts: system management, data management, device management, program package and user programs. The system provides two kinds of user interfaces: command menu and command characters. It is easy to change and enlarge this system because it is best modularized. The user programs include almost all the clinical protocols used now

  11. Advanced software development workstation. Engineering scripting language graphical editor: DRAFT design document

    Science.gov (United States)

    1991-01-01

    The Engineering Scripting Language (ESL) is a language designed to allow nonprogramming users to write Higher Order Language (HOL) programs by drawing directed graphs to represent the program and having the system generate the corresponding program in HOL. The ESL system supports user generation of HOL programs through the manipulation of directed graphs. The components of this graphs (nodes, ports, and connectors) are objects each of which has its own properties and property values. The purpose of the ESL graphical editor is to allow the user to create or edit graph objects which represent programs.

  12. ACHIEVING HIGH INTEGRITY OF PROCESS-CONTROL SOFTWARE BY GRAPHICAL DESIGN AND FORMAL VERIFICATION

    NARCIS (Netherlands)

    HALANG, WA; Kramer, B.J.

    The International Electrotechnical Commission is currently standardising four compatible languages for designing and implementing programmable logic controllers (PLCs). The language family includes a diagrammatic notation that supports the idea of software ICs to encourage graphical design

  13. A novel graphical technique for Pinch Analysis applications: Energy Targets and grassroots design

    International Nuclear Information System (INIS)

    Gadalla, Mamdouh A.

    2015-01-01

    Graphical abstract: A new HEN graphical design. - Highlights: • A new graphical technique for heat exchanger networks design. • Pinch Analysis principles and design rules are better interpreted. • Graphical guidelines for optimum heat integration. • New temperature-based graphs provide user-interactive features. - Abstract: Pinch Analysis is for decades a leading tool to energy integration for retrofit and design. This paper presents a new graphical technique, based on Pinch Analysis, for the grassroots design of heat exchanger networks. In the new graph, the temperatures of hot streams are plotted versus those of the cold streams. The temperature–temperature based graph is constructed to include temperatures of hot and cold streams as straight lines, horizontal lines for hot streams, and vertical lines for cold streams. The graph is applied to determine the pinch temperatures and Energy Targets. It is then used to synthesise graphically a complete exchanger network, achieving the Energy Targets. Within the new graph, exchangers are represented by inclined straight lines, whose slopes are proportional to the ratio of heat capacities and flows. Pinch Analysis principles for design are easily interpreted using this new graphical technique to design a complete exchanger network. Network designs achieved by the new technique can guarantee maximum heat recovery. The new technique can also be employed to simulate basic designs of heat exchanger networks. The strengths of the new tool are that it is simply applied using computers, requires no commercial software, and can be used for academic purposes/engineering education

  14. What is sought from graphic designers? A first thematic analysis of job offers for graphic design positions in the United Kingdom

    OpenAIRE

    Nicoletti Dziobczenski, Paulo; Person, Oscar

    2016-01-01

    An empirically grounded understanding about which knowledge and skills that are sought from designers is missing for a number of professional subfields of design. This gap in research challenges i) design educators in planning their educational offerings and ii) design practitioners and students in articulating their contribution to clients and future employers. In this paper, we study the references that are made to knowledge and skills in job offers for graphic designers in UK. Based on a f...

  15. Design Program in Graphic User Interface Environment for Automobile ER Devices

    Science.gov (United States)

    Lim, S. C.; Park, J. S.; Sohn, J. W.; Choi, S. B.

    This work presents a design and analysis program for vehicle devices utilizing an electrorheological (ER) fluid. The program is operated in graphic user interface (GUI) environment and the initial window is consisted of four subprogram modules which are related to ER shock absorber, ER seat damper, ER engine mount, and ER anti-lock brake system (ABS), respectively. In order to execute each module, both material properties and design parameters are to be chosen by the user. Then, the output display window shows the field-dependent performance characteristics to be considered as design criteria. In addition, control performances of the vehicle system equipped with ER devices are displayed in time and frequency domain. In order to demonstrate the effectiveness of the proposed program, ER shock absorber and ER ABS are designed and manufactured and their performance characteristics are evaluated.

  16. User perception and interpretation of tornado probabilistic hazard information: Comparison of four graphical designs.

    Science.gov (United States)

    Miran, Seyed M; Ling, Chen; James, Joseph J; Gerard, Alan; Rothfusz, Lans

    2017-11-01

    Effective design for presenting severe weather information is important to reduce devastating consequences of severe weather. The Probabilistic Hazard Information (PHI) system for severe weather is being developed by NOAA National Severe Storms Laboratory (NSSL) to communicate probabilistic hazardous weather information. This study investigates the effects of four PHI graphical designs for tornado threat, namely, "four-color"," red-scale", "grayscale" and "contour", on users' perception, interpretation, and reaction to threat information. PHI is presented on either a map background or a radar background. Analysis showed that the accuracy was significantly higher and response time faster when PHI was displayed on map background as compared to radar background due to better contrast. When displayed on a radar background, "grayscale" design resulted in a higher accuracy of responses. Possibly due to familiarity, participants reported four-color design as their favorite design, which also resulted in the fastest recognition of probability levels on both backgrounds. Our study shows the importance of using intuitive color-coding and sufficient contrast in conveying probabilistic threat information via graphical design. We also found that users follows a rational perceiving-judging-feeling-and acting approach in processing probabilistic hazard information for tornado. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Graphical User Interface for an Observing Control System for the UK Infrared Telescope

    Science.gov (United States)

    Tan, M.; Bridger, A.; Wright, G. S.; Adamson, A. J.; Currie, M. J.; Economou, F.

    A Graphical user interface for the observing control system of UK Infrared Telescope has been developed as a part of the ORAC (Observatory Reduction and Acquisition Control) Project. We analyzed and designed the system using the Unified Modelling Language (UML) with the CASE tool Rational Rose 98. The system has been implemented in a modular way with Java packages using Swing and RMI. This system is component-based with pluggability. Object orientation concepts and UML notations have been applied throughout the development.

  18. Design and Curriculum Considerations for a Computer Graphics Program in the Arts.

    Science.gov (United States)

    Leeman, Ruedy W.

    This history and state-of-the-art review of computer graphics describes computer graphics programs and proposed programs at Sheridan College (Canada), the Rhode Island School of Design, the University of Oregon, Northern Illinois University, and Ohio State University. These programs are discussed in terms of their philosophy, curriculum, student…

  19. A Curriculum Model: Engineering Design Graphics Course Updates Based on Industrial and Academic Institution Requirements

    Science.gov (United States)

    Meznarich, R. A.; Shava, R. C.; Lightner, S. L.

    2009-01-01

    Engineering design graphics courses taught in colleges or universities should provide and equip students preparing for employment with the basic occupational graphics skill competences required by engineering and technology disciplines. Academic institutions should introduce and include topics that cover the newer and more efficient graphics…

  20. A Graphics Design Framework to Visualize Multi-Dimensional Economic Datasets

    Science.gov (United States)

    Chandramouli, Magesh; Narayanan, Badri; Bertoline, Gary R.

    2013-01-01

    This study implements a prototype graphics visualization framework to visualize multidimensional data. This graphics design framework serves as a "visual analytical database" for visualization and simulation of economic models. One of the primary goals of any kind of visualization is to extract useful information from colossal volumes of…

  1. A Study of Current Trends and Issues Related to Technical/Engineering Design Graphics.

    Science.gov (United States)

    Clark, Aaron C.; Scales Alice

    2000-01-01

    Presents results from a survey of engineering design graphics educators who responded to questions related to current trends and issues in the profession of graphics education. Concludes that there is a clear trend in institutions towards the teaching of constraint-based modeling and computer-aided manufacturing. (Author/YDS)

  2. A graphical user-interface for propulsion system analysis

    Science.gov (United States)

    Curlett, Brian P.; Ryall, Kathleen

    1993-01-01

    NASA LeRC uses a series of computer codes to calculate installed propulsion system performance and weight. The need to evaluate more advanced engine concepts with a greater degree of accuracy has resulted in an increase in complexity of this analysis system. Therefore, a graphical user interface was developed to allow the analyst to more quickly and easily apply these codes. The development of this interface and the rationale for the approach taken are described. The interface consists of a method of pictorially representing and editing the propulsion system configuration, forms for entering numerical data, on-line help and documentation, post processing of data, and a menu system to control execution.

  3. New Perspective on Visual Communication Design Education: An Empirical Study of Applying Narrative Theory to Graphic Design Courses

    Science.gov (United States)

    Yang, Chao-Ming; Hsu, Tzu-Fan

    2017-01-01

    Visual communication design (VCD) is a form of nonverbal communication. The application of relevant linguistic or semiotic theories to VCD education renders graphic design an innovative and scientific discipline. In this study, actual teaching activities were examined to verify the feasibility of applying narrative theory to graphic design…

  4. Industrial application of a graphics computer-based training system

    International Nuclear Information System (INIS)

    Klemm, R.W.

    1985-01-01

    Graphics Computer Based Training (GCBT) roles include drilling, tutoring, simulation and problem solving. Of these, Commonwealth Edison uses mainly tutoring, simulation and problem solving. These roles are not separate in any particular program. They are integrated to provide tutoring and part-task simulation, part-task simulation and problem solving, or problem solving tutoring. Commonwealth's Graphics Computer Based Training program was a result of over a year's worth of research and planning. The keys to the program are it's flexibility and control. Flexibility is maintained through stand alone units capable of program authoring and modification for plant/site specific users. Yet, the system has the capability to support up to 31 terminals with a 40 mb hard disk drive. Control of the GCBT program is accomplished through establishment of development priorities and a central development facility (Commonwealth Edison's Production Training Center)

  5. Graphic overview system for DOE's effluent and environmental monitoring programs

    International Nuclear Information System (INIS)

    Burson, Z.G.; Elle, D.R.

    1980-03-01

    The Graphic Overview System is a compilation of photos, maps, overlays, and summary information of environmental programs and related data for each DOE site. The information consists of liquid and airborne effluent release points, on-site storage locations, monitoring locations, aerial survey results, population distributions, wind roses, and other related information. The relationships of different environmental programs are visualized through the use of colored overlays. Trends in monitoring data, effluent releases, and on-site storage data are also provided as a corollary to the graphic display of monitoring and release points. The results provide a working tool with which DOE management (headquarters and field offices) can place in proper perspective key aspects of all environmental programs and related data, and the resulting public impact of each DOE site

  6. A computer graphics program system for protein structure representation.

    Science.gov (United States)

    Ross, A M; Golub, E E

    1988-01-01

    We have developed a computer graphics program system for the schematic representation of several protein secondary structure analysis algorithms. The programs calculate the probability of occurrence of alpha-helix, beta-sheet and beta-turns by the method of Chou and Fasman and assign unique predicted structure to each residue using a novel conflict resolution algorithm based on maximum likelihood. A detailed structure map containing secondary structure, hydrophobicity, sequence identity, sequence numbering and the location of putative N-linked glycosylation sites is then produced. In addition, helical wheel diagrams and hydrophobic moment calculations can be performed to further analyze the properties of selected regions of the sequence. As they require only structure specification as input, the graphics programs can easily be adapted for use with other secondary structure prediction schemes. The use of these programs to analyze protein structure-function relationships is described and evaluated. PMID:2832829

  7. A USABILITY OF GRAPHIC DESIGN WITH LOCAL CONTENT IN THE INTERACTIVE MULTIMEDIA DESIGN FOR INDONESIAN STORYTELLING

    Directory of Open Access Journals (Sweden)

    Listia Natadjaja

    2004-01-01

    Full Text Available As the computer becomes a trend%2C interactive multimedia design can be one media to communicate the cultural knowledge. A folktale can be a one of the powerful materials to show a country’s culture. The folktale content can be understood effectively by implementing some cultural information background. The main aim of using the local content is to give a vision of the richness culture through graphic design in interactive multimedia technology. By implementing local graphic design based on the cultural background%2C user can have different feeling about the graphic style and the Indonesian richness culture. This method can also help the user to understand the interactive multimedia content easily. Finally%2C graphic design with local content is very effective for a transferring the richness culture. In order to make a good interactive multimedia design content based on a cultural background%2C a designer should need to understand about users%2C culture%2C technology and the whole design process. Abstract in Bahasa Indonesia : Seiring dengan berkembangnya penggunaan komputer menjadi suatu trend%2C interaktif multimedia desain dapat menjadi suatu media untuk mengkomunikasikan suatu pengetahuan mengenai suatu kebudayaan. Cerita rakyat%2C dapat merupakan kekuatan untuk menunjukan budaya suatu negara. Isi dari suatu cerita rakyat dapat dimengerti secara efektif dengan implementasi beberapa latar belakang budaya. Tujuan utama dari penggunaan muatan lokal adalah untuk memberikan suatu visi tentang kekayaan budaya melalui desain grafis dalam teknologi interaktif multimedia. .Dengan mengimplementasikan desain grafis lokal berdasar pada latar belakang budaya%2C pengguna multimedia dapat mempunyai perasaan yang berbeda terhadap gaya desain dan kekayaan budaya Indonesia. Metode ini diharapkan juga dapat membantu pengguna untuk mengerti isi suatu interaktif multimedia secara mudah. Pada akhirnya%2C dapat dikatakan bahwa muatan lokal sangatlah bermanfaat

  8. Feel the Fear: Learning Graphic Design in Affective Places and Online Spaces

    Science.gov (United States)

    Nottingham, Anitra

    2017-01-01

    This article explores the idea of pedagogic affect in both onsite and online graphic design learning spaces, and speculates on the role that this affect plays in the formation of the design student. I argue that embodied design knowledge is built by interactions with design professionals, activities that mimic the daily work of designers, and…

  9. Practical experience with graphical user interfaces and object-oriented design in the clinical laboratory.

    Science.gov (United States)

    Wells, I G; Cartwright, R Y; Farnan, L P

    1993-12-15

    The computing strategy in our laboratories evolved from research in Artificial Intelligence, and is based on powerful software tools running on high performance desktop computers with a graphical user interface. This allows most tasks to be regarded as design problems rather than implementation projects, and both rapid prototyping and an object-oriented approach to be employed during the in-house development and enhancement of the laboratory information systems. The practical application of this strategy is discussed, with particular reference to the system designer, the laboratory user and the laboratory customer. Routine operation covers five departments, and the systems are stable, flexible and well accepted by the users. Client-server computing, currently undergoing final trials, is seen as the key to further development, and this approach to Pathology computing has considerable potential for the future.

  10. Interactive graphical system for small-angle scattering analysis of polydisperse systems

    International Nuclear Information System (INIS)

    Konarev, P V; Volkov, V V; Svergun, D I

    2016-01-01

    A program suite for one-dimensional small-angle scattering analysis of polydisperse systems and multiple data sets is presented. The main program, POLYSAS , has a menu-driven graphical user interface calling computational modules from ATSAS package to perform data treatment and analysis. The graphical menu interface allows one to process multiple (time, concentration or temperature-dependent) data sets and interactively change the parameters for the data modelling using sliders. The graphical representation of the data is done via the Winteracter-based program SASPLOT . The package is designed for the analysis of polydisperse systems and mixtures, and permits one to obtain size distributions and evaluate the volume fractions of the components using linear and non-linear fitting algorithms as well as model-independent singular value decomposition. The use of the POLYSAS package is illustrated by the recent examples of its application to study concentration-dependent oligomeric states of proteins and time kinetics of polymer micelles for anticancer drug delivery. (paper)

  11. Design of graphic and animation in game interface based on cultural ...

    African Journals Online (AJOL)

    Design of graphic and animation in game interface based on cultural value: verification. ... Abstract. No Abstract. Keywords: game interface; cultural value; hofstede; prototype; eye tracker ... AJOL African Journals Online. HOW TO USE AJOL.

  12. An overview of interactive computer graphics and its application to computer-aided engineering and design

    International Nuclear Information System (INIS)

    Van Dam, A.

    1983-01-01

    The purpose of this brief birds-eye view of interactive graphics is to list the key ideas, and to show how one of the most important application areas, Computer Aided Engineering/Design takes advantage of it. (orig.)

  13. Graphical models for simulation and control of robotic systems for waste handling

    International Nuclear Information System (INIS)

    Drotning, W.D.; Bennett, P.C.

    1992-01-01

    This paper discusses detailed geometric models which have been used within a graphical simulation environment to study transportation cask facility design and to perform design and analyses of robotic systems for handling of nuclear waste. The models form the basis for a robot control environment which provides safety, flexibility, and reliability for operations which span the spectrum from autonomous control to tasks requiring direct human intervention

  14. Real-time graphics for the Space Station Freedom cupola, developed in the Systems Engineering Simulator

    Science.gov (United States)

    Red, Michael T.; Hess, Philip W.

    1989-01-01

    Among the Lyndon B. Johnson Space Center's responsibilities for Space Station Freedom is the cupola. Attached to the resource node, the cupola is a windowed structure that will serve as the space station's secondary control center. From the cupola, operations involving the mobile service center and orbital maneuvering vehicle will be conducted. The Systems Engineering Simulator (SES), located in building 16, activated a real-time man-in-the-loop cupola simulator in November 1987. The SES cupola is an engineering tool with the flexibility to evolve in both hardware and software as the final cupola design matures. Two workstations are simulated with closed-circuit television monitors, rotational and translational hand controllers, programmable display pushbuttons, and graphics display with trackball and keyboard. The displays and controls of the SES cupola are driven by a Silicon Graphics Integrated Raster Imaging System (IRIS) 4D/70 GT computer. Through the use of an interactive display builder program, SES, cupola display pages consisting of two dimensional and three dimensional graphics are constructed. These display pages interact with the SES via the IRIS real-time graphics interface. The focus is on the real-time graphics interface applications software developed on the IRIS.

  15. A graphics approach in the design of the dual air density Explorer satellites

    Science.gov (United States)

    Mcdougal, D. S.

    1975-01-01

    A computer program was developed to generate a graphics display of the Dual Air Density (DAD) Explorer satellites which aids in the engineering and scientific design. The program displays a two-dimensional view of both spacecraft and their surface features from any direction. The graphics have been an indispensable tool in the design, analysis, and understanding of the critical locations of the various surface features for both satellites.

  16. Small-scale tactile graphics for virtual reality systems

    Science.gov (United States)

    Roberts, John W.; Slattery, Oliver T.; Swope, Brett; Min, Volker; Comstock, Tracy

    2002-05-01

    As virtual reality technology moves forward, there is a need to provide the user with options for greater realism for closer engagement to the human senses. Haptic systems use force feedback to create a large-scale sensation of physical interaction in a virtual environment. Further refinement can be created by using tactile graphics to reproduce a detailed sense of touch. For example, a haptic system might create the sensation of the weight of a virtual orange that the user picks up, and the sensation of pressure on the fingers as the user squeezes the orange. A tactile graphic system could create the texture of the orange on the user's fingertips. IN the real wold, a detailed sense of touch plays a large part in picking up and manipulating small objects. Our team is working to develop technology that can drive a high density fingertip array of tactile simulators at a rapid refresh rate, sufficient to produce a realistic sense of touch. To meet the project criteria, the mechanism must be much lower cost than existing technologies, and must be sufficiently lightweight and compact to permit portable use and to enable installation of the stimulator array in the fingertip of a tactile glove. The primary intended applications for this technology are accessibility for the blind and visually impaired, teleoperation, and virtual reality systems.

  17. The Importance of Packaging and Graphic Design to Communicate Corporate Social Responsibility

    Directory of Open Access Journals (Sweden)

    Listia Natadjaja

    2011-01-01

    Full Text Available Graphic design’s function develops through time. It does not only function to inform a product but also elements to communicate Corporate Social Responsibility. As happened in catastrophic areas in Indonesia like Aceh in 2004, Nias in 2005, Jogjakarta in 2007, Bekasi District in 2009, etc. many donated products had their contributor’s information, especially the ones from corporations. There are many ways a company could implement their social responsibility. Graphic design cannot stand alone, it needs an effective media for its placement, one of them is packaging design. By using a Biskiz Susu packaging design as a case study, I try to analyze the design elements, like color, shape, brand, illustration/character, typography, and layout and then connect them with aspects like: the visual perception impact of packaging design and the importance in communicating Corporate Social Responsibility. For input information, I also discuss some consideration aspects of placing the contributor’s identity on the packaging. Based on this study, the contributor’s information in the products gives many advantages. The result shows that graphic design could be the effective element for communicating Corporate Social Responsibility and packaging design can be one of the recommended media for graphic design placement. Hopefully, this analysis could help a corporation, organization or the government in organizing the graphic design elements and considering a packaging as a medium to communicate Corporate Social Responsibility (CSR.

  18. Supporting Creative Responses in Design Education--The Development and Application of the Graphic Design Composition Method

    Science.gov (United States)

    Lu, Hui-Ping; Chen, Jun-Hong; Lee, Chang-Franw

    2016-01-01

    Inspiration is the primary element of good design. Designers, however, also risk not being able to find inspiration. Novice designers commonly find themselves to be depressed during the conceptual design phase when they fail to find inspiration and the information to be creative. Accordingly, under the graphic design parameter, we have developed…

  19. On the computation of well-structured graphic representations in architectural design

    NARCIS (Netherlands)

    Achten, H.H.

    2004-01-01

    Architects intensively use graphic representations to communicate their design ideas for themselves, between professionals, and others. The design drawing therefore, is an important medium to establish design support by means of computers. In order to make drawings accessible for computers, it is

  20. Needs Analysis for Graphic Design Learning Module Based on Technology & Learning Styles of Deaf Students

    Science.gov (United States)

    Ibrahim, Zainuddin; Alias, Norlidah; Nordin, Abu Bakar

    2016-01-01

    The field of Information Communication Technology has offered a promising future for deaf students. Web design, animation, and multimedia application design are a branch of graphic design area, which aim to aid their learning visually. However, most of the technical terms cannot be interpreted in Malaysian sign language. Moreover, the development…

  1. Incorporating Solid Modeling and Team-Based Design into Freshman Engineering Graphics.

    Science.gov (United States)

    Buchal, Ralph O.

    2001-01-01

    Describes the integration of these topics through a major team-based design and computer aided design (CAD) modeling project in freshman engineering graphics at the University of Western Ontario. Involves n=250 students working in teams of four to design and document an original Lego toy. Includes 12 references. (Author/YDS)

  2. The Bauhaus movement and its influence in graphic design, visual communication and architecture in Greece

    OpenAIRE

    Konstantinos Kyriakopoulos

    2016-01-01

    This paper attempts to present the elements defining the philosophical approach, the characteristics and the style of the Bauhaus movement. More specific it presents the social background of the period during which this school was established and the vision of its main representatives. It analyzes the way it influenced graphic design, visual communication and architecture in Greece. A comparison has been made between typical Bauhaus works and works of contemporary graphics aiming to find how ...

  3. CDP a graphic system for the interactive simulation and the dynamic analysis of continuous systems

    International Nuclear Information System (INIS)

    Ricci, A.; Teolis, A.

    1973-01-01

    An IBM 2250 graphic system for the interactive simulation of continuous sytems is illustrated. Time dependent quantities can be plotted or an animated, real or schematic, representation of the system being studied can be given

  4. Design and Development of a Graphical Setup Software for the CMS Global Trigger

    CERN Document Server

    Glaser, P; Bergauer, H; Padrta, M; Taurok,A; Wulz, C E

    2006-01-01

    The CMS experiment at CERNs Large Hadron Collider will search for new physics at high energies. Its trigger system is an essential component in the selection process of potentially interesting events. The Global Trigger is the final stage of the first-level selection process. It is implemented as a complex electronic system containing logic devices, which need to be programmed according to physics requirements. It has to reject or accept events for further processing based on coarse measurements of particle properties such as energies, momenta and location. Algorithms similar to the ones used in the physics analysis are executed in parallel during the event selection process. A graphical setup program to define these algorithms and to subsequently configure the hardware has been developed. The design and implementation of the program, guided by the principal requirements of flexibility, quality assurance, platform-independence and extensibility, are described.

  5. A new formal graphic language for the representation of complex energy distribution systems

    Science.gov (United States)

    Benes, E.; Viehboeck, F. P.

    A schematic notation system for the representation in design and analysis of multi-component heating systems is presented. This graphic language is clear and rigorous and allows quick changes between two basic levels of abstraction, as shown by two examples: a swimming pool with combined solar/electric heating system and the low temperature heating system of the Institute of Molecular Biology in Salzburg, Austria. The notation's 'energy path graphs' are more adequate for judging the relative merits of alternative system configurations than commonly used simplified installation schemes.

  6. Embedded 3D Graphics Core for FPGA-based System-on-Chip Applications

    DEFF Research Database (Denmark)

    Holten-Lund, Hans Erik

    2005-01-01

    This paper presents a 3D graphics accelerator core for an FPGA based system, and illustrates how to build a System-on-Chip containing a Xilinx MicroBlaze soft-core CPU and our 3D graphics accelerator core. The system is capable of running uClinux and hardware accelerated 3D graphics applications......, and the video display which periodically reads from memory to display the final rendered graphics. The graphics core uses internal scratch-pad memory to reduce its external bandwidth requirement, this is achieved by implementing a tile-based rendering algorithm. Reduced external bandwidth means that the power...

  7. X based interactive computer graphics applications for aerodynamic design and education

    Science.gov (United States)

    Benson, Thomas J.; Higgs, C. Fred, III

    1995-01-01

    Six computer applications packages have been developed to solve a variety of aerodynamic problems in an interactive environment on a single workstation. The packages perform classical one dimensional analysis under the control of a graphical user interface and can be used for preliminary design or educational purposes. The programs were originally developed on a Silicon Graphics workstation and used the GL version of the FORMS library as the graphical user interface. These programs have recently been converted to the XFORMS library of X based graphics widgets and have been tested on SGI, IBM, Sun, HP and PC-Lunix computers. The paper will show results from the new VU-DUCT program as a prime example. VU-DUCT has been developed as an educational package for the study of subsonic open and closed loop wind tunnels.

  8. Malleable Thought: The Role of Craft Thinking in Practice-Led Graphic Design

    Science.gov (United States)

    Ings, Welby

    2015-01-01

    This article considers the potential of craft processes as creative engagements in graphic design research. It initially discusses the uneasy history of craft within the discipline, then draws upon case studies undertaken by three established designers who, in their postgraduate theses, engaged with craft as a process of thinking. In doing so, the…

  9. Application of computer graphics in the design of custom orthopedic implants.

    Science.gov (United States)

    Bechtold, J E

    1986-10-01

    Implementation of newly developed computer modelling techniques and computer graphics displays and software have greatly aided the orthopedic design engineer and physician in creating a custom implant with good anatomic conformity in a short turnaround time. Further advances in computerized design and manufacturing will continue to simplify the development of custom prostheses and enlarge their niche in the joint replacement market.

  10. Messy History vs. Neat History: Toward an Expanded View of Women in Graphic Design.

    Science.gov (United States)

    Scotford, Martha

    1994-01-01

    Argues that a "messy history" approach is required to discover, study and include the variety of alternative approaches and activities that are often part of women designers' professional lives. Proposes a typology of roles played by women in graphic design for further research. (SR)

  11. NASA Access Mechanism - Graphical user interface information retrieval system

    Science.gov (United States)

    Hunter, Judy F.; Generous, Curtis; Duncan, Denise

    1993-01-01

    Access to online information sources of aerospace, scientific, and engineering data, a mission focus for NASA's Scientific and Technical Information Program, has always been limited by factors such as telecommunications, query language syntax, lack of standardization in the information, and the lack of adequate tools to assist in searching. Today, the NASA STI Program's NASA Access Mechanism (NAM) prototype offers a solution to these problems by providing the user with a set of tools that provide a graphical interface to remote, heterogeneous, and distributed information in a manner adaptable to both casual and expert users. Additionally, the NAM provides access to many Internet-based services such as Electronic Mail, the Wide Area Information Servers system, Peer Locating tools, and electronic bulletin boards.

  12. NASA access mechanism: Graphical user interface information retrieval system

    Science.gov (United States)

    Hunter, Judy; Generous, Curtis; Duncan, Denise

    1993-01-01

    Access to online information sources of aerospace, scientific, and engineering data, a mission focus for NASA's Scientific and Technical Information Program, has always been limited to factors such as telecommunications, query language syntax, lack of standardization in the information, and the lack of adequate tools to assist in searching. Today, the NASA STI Program's NASA Access Mechanism (NAM) prototype offers a solution to these problems by providing the user with a set of tools that provide a graphical interface to remote, heterogeneous, and distributed information in a manner adaptable to both casual and expert users. Additionally, the NAM provides access to many Internet-based services such as Electronic Mail, the Wide Area Information Servers system, Peer Locating tools, and electronic bulletin boards.

  13. Data structures, computer graphics, and pattern recognition

    CERN Document Server

    Klinger, A; Kunii, T L

    1977-01-01

    Data Structures, Computer Graphics, and Pattern Recognition focuses on the computer graphics and pattern recognition applications of data structures methodology.This book presents design related principles and research aspects of the computer graphics, system design, data management, and pattern recognition tasks. The topics include the data structure design, concise structuring of geometric data for computer aided design, and data structures for pattern recognition algorithms. The survey of data structures for computer graphics systems, application of relational data structures in computer gr

  14. Graphic Design in Jože Plečnik’s Fairytales Makalonca

    Directory of Open Access Journals (Sweden)

    Klementina Možina

    2011-11-01

    Full Text Available This paper focuses on a small fairytale book Makalonca, which was completelydesigned by Jože Plečnik.The Slovenian architecture by Jože Plečnik (1872–1957 is well known in Europe,while his work in the area of graphic design and typography is less known. Duringthe Second World War, he made all the decorations, vignettes and initial letters forthe fairytales, and elaborated graphic design for the book published in two differentbindings – hardcover and paperback. Two paperback reprints were subsequentlypublished as well. In both reprints it was stressed that the graphic design remainedthe same as done by Plečnik. Instead, both reprints are actually deformations of theoriginal. As a consequence, the Slovenian cultural heritage has lost a great deal.

  15. A Matlab-Based Graphical User Interface for Simulation and Control Design of a Hydrogen Mixer

    Science.gov (United States)

    Richter, Hanz; Figueroa, Fernando

    2003-01-01

    A Graphical User Interface (GUI) that facilitates prediction and control design tasks for a propellant mixer is described. The Hydrogen mixer is used in rocket test stand operations at the NASA John C. Stennis Space Center. The mixer injects gaseous hydrogen (GH2) into a stream of liquid hydrogen (LH2) to obtain a combined flow with desired thermodynamic properties. The flows of GH2 and LH2 into the mixer are regulated by two control valves, and a third control valve is installed at the exit of the mixer to regulate the combined flow. The three valves may be simultaneously operated in order to achieve any desired combination of total flow, exit temperature and mixer pressure within the range of operation. The mixer, thus, constitutes a three-input, three-output system. A mathematical model of the mixer has been obtained and validated with experimental data. The GUI presented here uses the model to predict mixer response under diverse conditions.

  16. Tools for Reactive Distillation Column Design: Graphical and Stage-to-Stage Computation Methods

    DEFF Research Database (Denmark)

    Sanchez Daza, O.; Cisneros, Eduardo Salvador P.; Hostrup, Martin

    2001-01-01

    Based on the element mass balance concept, a graphical design method and a stage-to-stage multicomponent design method for reactive distillation columns have been developed. For distillation columns comprising reactive and non-reactive stages, a simple design strategy based on reactive and non......-reactive bubble point calculations is proposed. This strategy tracks the conversion and temperature between the feed and the end stages of the column. An illustrative example highlights the verification of the design strategy through rigorous simulation....

  17. Transformations and innovations of punk graphic design in Peter Punk series from Disney

    Directory of Open Access Journals (Sweden)

    Regina Rossetti

    2016-06-01

    Full Text Available The punk movement is an example of peripheral culture that currently influences the dominant culture. This article aims to point out what were the changes and the innovations that the punk graphic design had to struggle to adapt itself to the series Peter Punk, exhibited by Disney XD channel. Through literature review and analysis of images, it is possible to conclude that the show’s graphic design absorbed the punk style with other influences, but without the spontaneity of punk.

  18. an improved map based graphical android authentication system

    African Journals Online (AJOL)

    Ahmad et al.

    was designed on mobile android devices, but it did not provide a large choice or multiple ... password authentication system android application devices. The system adds the ..... Password, Computer Science Thesis.Paper 2.Pg 5-18. 27.

  19. Desktop computer graphics for RMS/payload handling flight design

    Science.gov (United States)

    Homan, D. J.

    1984-01-01

    A computer program, the Multi-Adaptive Drawings, Renderings and Similitudes (MADRAS) program, is discussed. The modeling program, written for a desktop computer system (the Hewlett-Packard 9845/C), is written in BASIC and uses modular construction of objects while generating both wire-frame and hidden-line drawings from any viewpoint. The dimensions and placement of objects are user definable. Once the hidden-line calculations are made for a particular viewpoint, the viewpoint may be rotated in pan, tilt, and roll without further hidden-line calculations. The use and results of this program are discussed.

  20. A computer-controlled conformal radiotherapy system. III: graphical simulation and monitoring of treatment delivery

    International Nuclear Information System (INIS)

    Kessler, Marc L.; McShan, Daniel L.; Fraass, Benedick A.

    1995-01-01

    Purpose: Safe and efficient delivery of radiotherapy using computer-controlled machines requires new procedures to design and verify the actual delivery of these treatments. Graphical simulation and monitoring techniques for treatment delivery have been developed for this purpose. Methods and Materials: A graphics-based simulator of the treatment machine and a set of procedures for creating and manipulating treatment delivery scripts are used to simulate machine motions, detect collisions, and monitor machine positions during treatment. The treatment delivery simulator is composed of four components: a three-dimensional dynamic model of the treatment machine; a motion simulation and collision detection algorithm, user-interface widgets that mimic the treatment machine's control and readout devices; and an icon-based interface for creating and manipulating treatment delivery scripts. These components are used in a stand-alone fashion for interactive treatment delivery planning and integrated with a machine control system for treatment implementation and monitoring. Results: A graphics-based treatment delivery simulator and a set of procedures for planning and monitoring computer-controlled treatment delivery have been developed and implemented as part of a comprehensive computer-controlled conformal radiotherapy system. To date, these techniques have been used to design and help monitor computer-controlled treatments on a radiotherapy machine for more than 200 patients. Examples using these techniques for treatment delivery planning and on-line monitoring of machine motions during therapy are described. Conclusion: A system that provides interactive graphics-based tools for defining the sequence of machine motions, simulating treatment delivery including collision detection, and presenting the therapists with continual visual feedback from the treatment machine has been successfully implemented for routine clinical use as part of an overall system for computer

  1. Graphic Interface for the Gearhart-Owen 3500 Uranium Logging System

    International Nuclear Information System (INIS)

    Haller, I; Mendieta, C; Tenzi, A

    2000-01-01

    This work presents the design and development of a computing graphic interface in order to modernize the data acquisition of an old Gearhart-Owen uranium logging system.The paper describes the different items involved in the project: the system hardware developed to carry out the signal conditioning and data digitization the system software, which performs the monitoring and storing of the updated information.Finally, we compare the results of de recent field measurements with the previous one obtained with the original equipment and show the feasibility of the project

  2. Graphic design and scientific research: the experience of the INGV Laboratorio Grafica e Immagini

    Science.gov (United States)

    Riposati, Daniela; D'Addezio, Giuliana; Chesi, Angela; Di Laura, Francesca; Palone, Sabrina

    2016-04-01

    The Laboratorio Grafica e Immagini is the INGV reference structure for the graphic and visual communication supporting institutional and research activities. Part of the activity is focused on the production of different materials concerning the INGV Educational and Outreach projects on the main themes of Geophysics and natural hazards. The forefront results of research activity, in fact, are periodically transferred to the public through an intense and comprehensive plan of scientific dissemination. In 10 years of activity, the Laboratorio has become an essential point of reference for this production, widely known within the scientific community. Positive experiences are the result of a strict relationship between graphic design and scientific research, in particular the process concerning the collaborative work between designers and researchers. In projects such as the realization of museum exhibition or the production of illustrative brochures, generally designed for broad-spectrum public, the goal is to make easier the understanding and to support the scientific message, making concepts enjoyable and fruitful through the emotional involvement that visual image can arouse. Our graphics and editorial products through composition of signs and images by using differt tools on different media (the use of colors, lettering, graphic design, visual design, web design etc.) link to create a strong identity "INGV style", in order to make them easily recognizable in Educational and Outreach projects: in one words "branding". For example, a project product package might include a logo or other artwork, organized text and pure design elements such as shapes and colour, which unify the piece. Colour is used not only to help the "brand" stand out from the international overview, but in our case to have a unifying outcome across all the INGV sections. We also analysed the restyling project of different materials, one of the most important features of graphic design

  3. Graphics processing units in bioinformatics, computational biology and systems biology.

    Science.gov (United States)

    Nobile, Marco S; Cazzaniga, Paolo; Tangherloni, Andrea; Besozzi, Daniela

    2017-09-01

    Several studies in Bioinformatics, Computational Biology and Systems Biology rely on the definition of physico-chemical or mathematical models of biological systems at different scales and levels of complexity, ranging from the interaction of atoms in single molecules up to genome-wide interaction networks. Traditional computational methods and software tools developed in these research fields share a common trait: they can be computationally demanding on Central Processing Units (CPUs), therefore limiting their applicability in many circumstances. To overcome this issue, general-purpose Graphics Processing Units (GPUs) are gaining an increasing attention by the scientific community, as they can considerably reduce the running time required by standard CPU-based software, and allow more intensive investigations of biological systems. In this review, we present a collection of GPU tools recently developed to perform computational analyses in life science disciplines, emphasizing the advantages and the drawbacks in the use of these parallel architectures. The complete list of GPU-powered tools here reviewed is available at http://bit.ly/gputools. © The Author 2016. Published by Oxford University Press.

  4. R graphics

    CERN Document Server

    Murrell, Paul

    2005-01-01

    R is revolutionizing the world of statistical computing. Powerful, flexible, and best of all free, R is now the program of choice for tens of thousands of statisticians. Destined to become an instant classic, R Graphics presents the first complete, authoritative exposition on the R graphical system. Paul Murrell, widely known as the leading expert on R graphics, has developed an in-depth resource that takes nothing for granted and helps both neophyte and seasoned users master the intricacies of R graphics. After an introductory overview of R graphics facilities, the presentation first focuses

  5. Graphical Data Analysis on the Circle: Wrap-Around Time Series Plots for (Interrupted) Time Series Designs.

    Science.gov (United States)

    Rodgers, Joseph Lee; Beasley, William Howard; Schuelke, Matthew

    2014-01-01

    Many data structures, particularly time series data, are naturally seasonal, cyclical, or otherwise circular. Past graphical methods for time series have focused on linear plots. In this article, we move graphical analysis onto the circle. We focus on 2 particular methods, one old and one new. Rose diagrams are circular histograms and can be produced in several different forms using the RRose software system. In addition, we propose, develop, illustrate, and provide software support for a new circular graphical method, called Wrap-Around Time Series Plots (WATS Plots), which is a graphical method useful to support time series analyses in general but in particular in relation to interrupted time series designs. We illustrate the use of WATS Plots with an interrupted time series design evaluating the effect of the Oklahoma City bombing on birthrates in Oklahoma County during the 10 years surrounding the bombing of the Murrah Building in Oklahoma City. We compare WATS Plots with linear time series representations and overlay them with smoothing and error bands. Each method is shown to have advantages in relation to the other; in our example, the WATS Plots more clearly show the existence and effect size of the fertility differential.

  6. MAPPER, Graphics for Transparencies and Slides Using DISSPLA System

    International Nuclear Information System (INIS)

    Barker, B.

    1999-01-01

    1 - Description of problem or function: MAPPER is designed to provide a command language whereby non-programmers can produce report quality visual aids. The user can produce presentation and report quality slides, graphs, charts, tables, and maps in both color and black and white on Tektronix and DSCAN terminals and Tektronix plotters. MAPPER can draw boxes, circles, ellipses, and complex line segments in a wide variety of line formats. There are six types of label commands and 12 to 15 lettering styles available to meet labeling requirements. Label options include manual sizing and location, two forms of automatic sizing and location, flexible string control, rotation, justification control, and multiple line capability. The user has choice of color control and selective shading of specific areas. Symbols may be defined, positioned, scaled, distorted, and shaded as specified. Axes, curves, and error bars may be drawn. Additional features include user-defined logos, skipping, multilevel projection ports, contouring, three types of file subroutine usage, and FORTRAN support capabilities. 2 - Method of solution: MAPPER reads English language type command files that the user has generated executing each command as it is read. MAPPER acts as a FORTRAN front-end to the Computer Associates CA-DISSPLA proprietary graphics software product. 3 - Restrictions on the complexity of the problem: Three-dimensional surfaces and mapping data bases are not included

  7. Graphics Processors in HEP Low-Level Trigger Systems

    International Nuclear Information System (INIS)

    Ammendola, Roberto; Biagioni, Andrea; Chiozzi, Stefano; Ramusino, Angelo Cotta; Cretaro, Paolo; Lorenzo, Stefano Di; Fantechi, Riccardo; Fiorini, Massimiliano; Frezza, Ottorino; Lamanna, Gianluca; Cicero, Francesca Lo; Lonardo, Alessandro; Martinelli, Michele; Neri, Ilaria; Paolucci, Pier Stanislao; Pastorelli, Elena; Piandani, Roberto; Pontisso, Luca; Rossetti, Davide; Simula, Francesco; Sozzi, Marco; Vicini, Piero

    2016-01-01

    Usage of Graphics Processing Units (GPUs) in the so called general-purpose computing is emerging as an effective approach in several fields of science, although so far applications have been employing GPUs typically for offline computations. Taking into account the steady performance increase of GPU architectures in terms of computing power and I/O capacity, the real-time applications of these devices can thrive in high-energy physics data acquisition and trigger systems. We will examine the use of online parallel computing on GPUs for the synchronous low-level trigger, focusing on tests performed on the trigger system of the CERN NA62 experiment. To successfully integrate GPUs in such an online environment, latencies of all components need analysing, networking being the most critical. To keep it under control, we envisioned NaNet, an FPGA-based PCIe Network Interface Card (NIC) enabling GPUDirect connection. Furthermore, it is assessed how specific trigger algorithms can be parallelized and thus benefit from a GPU implementation, in terms of increased execution speed. Such improvements are particularly relevant for the foreseen Large Hadron Collider (LHC) luminosity upgrade where highly selective algorithms will be essential to maintain sustainable trigger rates with very high pileup

  8. A Case Study in Collaboration: Looking Back at the National Graphic Design Archive

    Science.gov (United States)

    Remington, R. Roger

    2004-01-01

    Inspired by the 1980s interest in graphic design history, an initially productive, but difficult to sustain, collaboration among three American universities from the late 1980s to the mid-1990s, is the subject of this case study. The ideas behind a much-needed archival consortium, its organization and its difficulties in sustaining collaboration…

  9. Engineering Graphics and Design Teachers' Understanding and Teaching of Assembly Drawing

    Science.gov (United States)

    Singh-Pillay, Asheena; Sotsaka, Douglas Sibusiso

    2017-01-01

    This study explored the relationship between teachers' content knowledge and their pedagogical skills, and reports on that relationship in the teaching of Assembly Drawing (AD) in a South African context. Given that Engineering Graphics Design (EGD) learners perform poorly in the AD section of the matriculation examination, we need to understand…

  10. Faith-Learning Interaction in Graphic Design Courses in Protestant Evangelical Colleges and Universities

    Science.gov (United States)

    Bower, Lorraine

    2010-01-01

    Integration or connectedness between faith and learning is a core aim of Protestant evangelical colleges and universities. It is pursued in a number of different ways in the academic programs of these institutions, even in commercially oriented courses that they offer, such as graphic design. However, the different ways that practical and…

  11. Symptomatic knee disorders in floor layers and graphic designers. A cross-sectional study

    DEFF Research Database (Denmark)

    Jensen, Lilli Kirkeskov; Rytter, Søren; Bonde, Jens Peter

    2012-01-01

    Previous studies have described an increased risk of developing tibio-femoral osteoarthritis (TF OA), meniscal tears and bursitis among those with a trade as floor layers. The purpose of this study was to analyse symptomatic knee disorders among floor layers that were highly exposed to kneeling w...... work tasks compared to graphic designers without knee-demanding work tasks....

  12. Personality Dominant Values in Graphic Design Students in Their Educational Practice

    Science.gov (United States)

    Flores, René Pedroza

    2016-01-01

    The purpose of this article is to study the personality dominant values in Graphic Design students from the Autonomous University of the State of Mexico. A scale developed by Allport, Vernon and Lindsey called: "Study of values. A scale for the measuring of personality dominant interests" was used. The sample was applied to 124 students,…

  13. The Design of a Graphical User Interface for an Electronic Classroom.

    Science.gov (United States)

    Cahalan, Kathleen J.; Levin, Jacques

    2000-01-01

    Describes the design of a prototype for the graphical user interface component of an electronic classroom (ECR) application that supports real-time lectures and question-and-answer sessions between an instructor and students. Based on requirements analysis and an analysis of competing products, a Web-based ECR prototype was produced. Findings show…

  14. Advertising Graphic Design and Its Effect on Recall and Attitude: A Field Experiment.

    Science.gov (United States)

    Surlin, Stuart H.; Kosak, Hermann H.

    Advertisers and other mass media communicators are interested in the potential cognitive and affective effects of various graphic designs, specifically relating to the recall of information and the attitude toward information presented. This study deals with the respondent's recall of information contained within an advertisement as well as the…

  15. Designing and Using an Open Graphic Interface for Instruction in Geometrical Optics.

    Science.gov (United States)

    Ronen, Miky; And Others

    1993-01-01

    Discusses conceptual difficulties in the field of geometrical optics and describes RAY, a microcomputer-based graphic interface that was designed to serve as a teaching aid and as a learning environment. The ability to combine theory and formal representations with real demonstrations and experiments is discussed. (Contains seven references.) (LRW)

  16. Computer Graphics 2: More of the Best Computer Art and Design.

    Science.gov (United States)

    1994

    This collection of computer generated images aims to present media tools and processes, stimulate ideas, and inspire artists and art students working in computer-related design. The images are representative of state-of-the-art editorial, broadcast, packaging, fine arts, and graphic techniques possible through computer generation. Each image is…

  17. Enhancement to the Tektronix PLOT-10 Terminal Control System for creation of graphics metafiles

    International Nuclear Information System (INIS)

    Gray, W.H.

    1983-01-01

    Many data handling and analysis codes at the Oak Ridge National Laboratory (ORNL) use the Tektronix PLOT-10 Terminal Control System to graphically display data upon Tektronix or Tektronix-emulating graphics devices. Prior to the development of the software libraries and postprocessors discussed within this report, ORNL users were limited to the type of hardcopy output obtainable from the Tektronix PLOT-10 software library. Only Tektronix graphics devices are supported by the PLOT-10 library. The graphics library presented here eliminates this restriction by implementing a suite of software that optionally creates a graphics metafile within the user's disk area while simultaneously drawing a display image on the screen of a user's Tektronix terminal. This graphics metafile can then be postprocessed onto any of the graphics devices at ORNL via the ORNL PLOT command

  18. The graphics software of the Saclay Linear Accelerator control system

    International Nuclear Information System (INIS)

    Gournay, J.F.

    1988-01-01

    The graphics software used for the control of the Saclay Linear Accelerator is described. The specific requirements that such a software must have in this environment are outlined and some typical applications are presented. (orig.)

  19. Standards for electronic imaging for graphic arts systems

    Science.gov (United States)

    Dunn, S. T.; Dunn, Patrice M.

    1991-03-01

    This paper examines the development of electronic imaging standards by and for the graphic arts industry. Taken collectively this body of work is referred to as Digital Data Exchange Standards (DDES). Because these standards are being driven by market and user requirements there are several fundamental guiding principles to their development. This paper examines these and provides an overview to the technical developments undertaken by the accredited graphic arts industry standards committees to date.

  20. A standard format and a graphical user interface for spin system specification.

    Science.gov (United States)

    Biternas, A G; Charnock, G T P; Kuprov, Ilya

    2014-03-01

    We introduce a simple and general XML format for spin system description that is the result of extensive consultations within Magnetic Resonance community and unifies under one roof all major existing spin interaction specification conventions. The format is human-readable, easy to edit and easy to parse using standard XML libraries. We also describe a graphical user interface that was designed to facilitate construction and visualization of complicated spin systems. The interface is capable of generating input files for several popular spin dynamics simulation packages. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  1. JACK - ANTHROPOMETRIC MODELING SYSTEM FOR SILICON GRAPHICS WORKSTATIONS

    Science.gov (United States)

    Smith, B.

    1994-01-01

    JACK is an interactive graphics program developed at the University of Pennsylvania that displays and manipulates articulated geometric figures. JACK is typically used to observe how a human mannequin interacts with its environment and what effects body types will have upon the performance of a task in a simulated environment. Any environment can be created, and any number of mannequins can be placed anywhere in that environment. JACK includes facilities to construct limited geometric objects, position figures, perform a variety of analyses on the figures, describe the motion of the figures and specify lighting and surface property information for rendering high quality images. JACK is supplied with a variety of body types pre-defined and known to the system. There are both male and female bodies, ranging from the 5th to the 95th percentile, based on NASA Standard 3000. Each mannequin is fully articulated and reflects the joint limitations of a normal human. JACK is an editor for manipulating previously defined objects known as "Peabody" objects. Used to describe the figures as well as the internal data structure for representing them, Peabody is a language with a powerful and flexible mechanism for representing connectivity between objects, both the joints between individual segments within a figure and arbitrary connections between different figures. Peabody objects are generally comprised of several individual figures, each one a collection of segments. Each segment has a geometry represented by PSURF files that consist of polygons or curved surface patches. Although JACK does not have the capability to create new objects, objects may be created by other geometric modeling programs and then translated into the PSURF format. Environment files are a collection of figures and attributes that may be dynamically moved under the control of an animation file. The animation facilities allow the user to create a sequence of commands that duplicate the movements of a

  2. The Bauhaus movement and its influence in graphic design, visual communication and architecture in Greece

    Directory of Open Access Journals (Sweden)

    Konstantinos Kyriakopoulos

    2016-07-01

    Full Text Available This paper attempts to present the elements defining the philosophical approach, the characteristics and the style of the Bauhaus movement. More specific it presents the social background of the period during which this school was established and the vision of its main representatives. It analyzes the way it influenced graphic design, visual communication and architecture in Greece. A comparison has been made between typical Bauhaus works and works of contemporary graphics aiming to find how they were influenced by the Bauhaus movement. Especially, it presents the projects (posters and buildings and the artists who worked according to the Bauhaus rules. This is a small research of how the Bauhaus school influenced modern graphic art and visual communication design in Greece until today. The conclusion of this research is that the Bauhaus movement which was the first to combine art with technology to obtain clarity and functionality rather than aesthetics, still has a crucial affect on modern design, graphic arts and visual communication in Greece.

  3. The Bauhaus movement and its influence in graphic design, visual communication and architecture in Greece

    Directory of Open Access Journals (Sweden)

    Konstantinos Kyriakopoulos

    2017-04-01

    Full Text Available This paper attempts to present the elements defining the philosophical approach, the characteristics and the style of the Bauhaus movement. More specific it presents the social background of the period during which this school was established and the vision of its main representatives. It analyzes the way it influenced graphic design, visual communication and architecture in Greece. A comparison has been made between typical Bauhaus works and works of contemporary graphics aiming to find how they were influenced by the Bauhaus movement. Especially, it presents the projects (posters and buildings and the artists who worked according to the Bauhaus rules. This is a small research of how the Bauhaus school influenced modern graphic art and visual communication design in Greece until today. The conclusion of this research is that the Bauhaus movement which was the first to combine art with technology to obtain clarity and functionality rather than aesthetics, still has a crucial affect on modern design, graphic arts and visual communication in Greece

  4. A Statistical Graphical Model of the California Reservoir System

    Science.gov (United States)

    Taeb, A.; Reager, J. T.; Turmon, M.; Chandrasekaran, V.

    2017-11-01

    The recent California drought has highlighted the potential vulnerability of the state's water management infrastructure to multiyear dry intervals. Due to the high complexity of the network, dynamic storage changes in California reservoirs on a state-wide scale have previously been difficult to model using either traditional statistical or physical approaches. Indeed, although there is a significant line of research on exploring models for single (or a small number of) reservoirs, these approaches are not amenable to a system-wide modeling of the California reservoir network due to the spatial and hydrological heterogeneities of the system. In this work, we develop a state-wide statistical graphical model to characterize the dependencies among a collection of 55 major California reservoirs across the state; this model is defined with respect to a graph in which the nodes index reservoirs and the edges specify the relationships or dependencies between reservoirs. We obtain and validate this model in a data-driven manner based on reservoir volumes over the period 2003-2016. A key feature of our framework is a quantification of the effects of external phenomena that influence the entire reservoir network. We further characterize the degree to which physical factors (e.g., state-wide Palmer Drought Severity Index (PDSI), average temperature, snow pack) and economic factors (e.g., consumer price index, number of agricultural workers) explain these external influences. As a consequence of this analysis, we obtain a system-wide health diagnosis of the reservoir network as a function of PDSI.

  5. Design of Flight Control Panel Layout using Graphical User Interface in MATLAB

    Science.gov (United States)

    Wirawan, A.; Indriyanto, T.

    2018-04-01

    This paper introduces the design of Flight Control Panel (FCP) Layout using Graphical User Interface in MATLAB. The FCP is the interface to give the command to the simulation and to monitor model variables while the simulation is running. The command accommodates by the FCP are altitude command, the angle of sideslip command, heading command, and setting command for turbulence model. The FCP was also designed to monitor the flight parameter while the simulation is running.

  6. Sculpting proteins interactively: continual energy minimization embedded in a graphical modeling system.

    Science.gov (United States)

    Surles, M C; Richardson, J S; Richardson, D C; Brooks, F P

    1994-02-01

    We describe a new paradigm for modeling proteins in interactive computer graphics systems--continual maintenance of a physically valid representation, combined with direct user control and visualization. This is achieved by a fast algorithm for energy minimization, capable of real-time performance on all atoms of a small protein, plus graphically specified user tugs. The modeling system, called Sculpt, rigidly constrains bond lengths, bond angles, and planar groups (similar to existing interactive modeling programs), while it applies elastic restraints to minimize the potential energy due to torsions, hydrogen bonds, and van der Waals and electrostatic interactions (similar to existing batch minimization programs), and user-specified springs. The graphical interface can show bad and/or favorable contacts, and individual energy terms can be turned on or off to determine their effects and interactions. Sculpt finds a local minimum of the total energy that satisfies all the constraints using an augmented Lagrange-multiplier method; calculation time increases only linearly with the number of atoms because the matrix of constraint gradients is sparse and banded. On a 100-MHz MIPS R4000 processor (Silicon Graphics Indigo), Sculpt achieves 11 updates per second on a 20-residue fragment and 2 updates per second on an 80-residue protein, using all atoms except non-H-bonding hydrogens, and without electrostatic interactions. Applications of Sculpt are described: to reverse the direction of bundle packing in a designed 4-helix bundle protein, to fold up a 2-stranded beta-ribbon into an approximate beta-barrel, and to design the sequence and conformation of a 30-residue peptide that mimics one partner of a protein subunit interaction. Computer models that are both interactive and physically realistic (within the limitations of a given force field) have 2 significant advantages: (1) they make feasible the modeling of very large changes (such as needed for de novo design), and

  7. Graphical User Interface Development and Design to Support Airport Runway Configuration Management

    Science.gov (United States)

    Jones, Debra G.; Lenox, Michelle; Onal, Emrah; Latorella, Kara A.; Lohr, Gary W.; Le Vie, Lisa

    2015-01-01

    The objective of this effort was to develop a graphical user interface (GUI) for the National Aeronautics and Space Administration's (NASA) System Oriented Runway Management (SORM) decision support tool to support runway management. This tool is expected to be used by traffic flow managers and supervisors in the Airport Traffic Control Tower (ATCT) and Terminal Radar Approach Control (TRACON) facilities.

  8. Design and validation of an improved graphical user interface with the 'Tool ball'.

    Science.gov (United States)

    Lee, Kuo-Wei; Lee, Ying-Chu

    2012-01-01

    The purpose of this research is introduce the design of an improved graphical user interface (GUI) and verifies the operational efficiency of the proposed interface. Until now, clicking the toolbar with the mouse is the usual way to operate software functions. In our research, we designed an improved graphical user interface - a tool ball that is operated by a mouse wheel to perform software functions. Several experiments are conducted to measure the time needed to operate certain software functions with the traditional combination of "mouse click + tool button" and the proposed integration of "mouse wheel + tool ball". The results indicate that the tool ball design can accelerate the speed of operating software functions, decrease the number of icons on the screen, and enlarge the applications of the mouse wheel. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  9. Graphic Design Of “Green Mission” Education Game Using Software Based On Vector

    Directory of Open Access Journals (Sweden)

    Nur Yanti

    2018-01-01

    Full Text Available Educational game is a digital game in its design using the elements of education and in it support teaching and learning by using technology that is interactive media. Generally an educational game has a fun look, an easy-to-use menu, as well as color combinations that are used that are GUI-based (Graphic User Interface so as to create appeal to users. Because it is undeniable that the human brain tends to more quickly capture learning through visual images rather than writings. Therefore, graphic design of an educational game becomes one of the important points. Software applications become one of the solutions in making game design, one of which is a vector-based software applications. There are various software that can be used in accordance with the function and usefulness of each. But in general the way the software works almost same.

  10. Computer graphics from basic to application

    International Nuclear Information System (INIS)

    Kim, Do Hyeong; Mun, Sung Min

    1998-04-01

    This book mentions conception of computer graphics, background history, necessity and applied field like construction design, image processing, auto mobile design, fashion design and TV broadcast, basic principle of computer, computer graphics hardware, computer graphics software such as adobe illustrator tool box and adobe photo shop, quarkXpress like introduction, application and operating circumstance, 3D graphics with summary, difference of versions of 3D studio and system, and Auto CAD application.

  11. Computer graphics from basic to application

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Do Hyeong; Mun, Sung Min

    1998-04-15

    This book mentions conception of computer graphics, background history, necessity and applied field like construction design, image processing, auto mobile design, fashion design and TV broadcast, basic principle of computer, computer graphics hardware, computer graphics software such as adobe illustrator tool box and adobe photo shop, quarkXpress like introduction, application and operating circumstance, 3D graphics with summary, difference of versions of 3D studio and system, and Auto CAD application.

  12. Graphical User Interfaces and Library Systems: End-User Reactions.

    Science.gov (United States)

    Zorn, Margaret; Marshall, Lucy

    1995-01-01

    Describes a study by Parke-Davis Pharmaceutical Research Library to determine user satisfaction with the graphical user interface-based (GUI) Dynix Marquis compared with the text-based Dynix Classic Online Public Access Catalog (OPAC). Results show that the GUI-based OPAC was preferred by endusers over the text-based OPAC. (eight references) (DGM)

  13. An Application of Graphical Approach to Construct Multiple Testing Procedure in a Hypothetical Phase III Design

    Directory of Open Access Journals (Sweden)

    Naitee eTing

    2014-01-01

    Full Text Available Many multiple testing procedures (MTP have been developed in recent years. Among these new procedures, the graphical approach is flexible and easy to communicate with non-statisticians. A hypothetical Phase III clinical trial design is introduced in this manuscript to demonstrate how graphical approach can be applied in clinical product development. In this design, an active comparator is used. It is thought that this test drug under development could potentially be superior to this comparator. For comparison of efficacy, the primary endpoint is well established and widely accepted by regulatory agencies. However, an important secondary endpoint based on Phase II findings looks very promising. The target dose may have a good opportunity to deliver superiority to the comparator. Furthermore, a lower dose is included in case the target dose may demonstrate potential safety concerns. This Phase III study is designed as a non-inferiority trial with two doses, and two endpoints. This manuscript will illustrate how graphical approach is applied to this design in handling multiple testing issues.

  14. An Object-Oriented Graphical User Interface for a Reusable Rocket Engine Intelligent Control System

    Science.gov (United States)

    Litt, Jonathan S.; Musgrave, Jeffrey L.; Guo, Ten-Huei; Paxson, Daniel E.; Wong, Edmond; Saus, Joseph R.; Merrill, Walter C.

    1994-01-01

    An intelligent control system for reusable rocket engines under development at NASA Lewis Research Center requires a graphical user interface to allow observation of the closed-loop system in operation. The simulation testbed consists of a real-time engine simulation computer, a controls computer, and several auxiliary computers for diagnostics and coordination. The system is set up so that the simulation computer could be replaced by the real engine and the change would be transparent to the control system. Because of the hard real-time requirement of the control computer, putting a graphical user interface on it was not an option. Thus, a separate computer used strictly for the graphical user interface was warranted. An object-oriented LISP-based graphical user interface has been developed on a Texas Instruments Explorer 2+ to indicate the condition of the engine to the observer through plots, animation, interactive graphics, and text.

  15. Perception and multimeaning analysis of graphic symbols for Thai picture-based communication system.

    Science.gov (United States)

    Chompoobutr, Sarinya; Potibal, Puttachart; Boriboon, Monthika; Phantachat, Wantanee

    2013-03-01

    Graphic symbols are a vital part of most augmentative and alternative communication systems. Communication fluency of graphic symbol user depends on how well the relationship between symbols and its referents are learnt. The first aim of this study is to survey the perception of the selected graphic symbols across seven age groups of participants with different educational background. Sixty-five individuals identified themselves as Thai and ranged in age from 10 to 50 years participated in the investigation used 64 graphic symbols. The last aim of this study is to demonstrate the analysis of multimeaning graphic symbols, which will be used in Thai Picture-based communication system. The twenty graphic symbols with 9-14 meanings are analyzed in both syntactic and semantic aspects. The meanings are divided into five categories: noun, verb/adjective, size, color and shape. Respect to the first aim, the results suggest that the participants under investigation with different sexes, age groups, as well as various educational levels perceive the features or inherent characteristics of such graphic symbols similarly. The results of the analysis of multimeaning of graphic symbols indicate that the foundation of Minspeak, polysemy and redundancy of the words illustrates the inherit meanings of the real-life objects, and it also conveys that the Thai graphic symbols are influenced by numerous factors in Thai circumstance such as ability, motivation, experience, worldview and culture.

  16. Theorema 2.0: A Graphical User Interface for a Mathematical Assistant System

    Directory of Open Access Journals (Sweden)

    Wolfgang Windsteiger

    2013-07-01

    Full Text Available Theorema 2.0 stands for a re-design including a complete re-implementation of the Theorema system, which was originally designed, developed, and implemented by Bruno Buchberger and his Theorema group at RISC. In this paper, we present the first prototype of a graphical user interface (GUI for the new system. It heavily relies on powerful interactive capabilities introduced in recent releases of the underlying Mathematica system, most importantly the possibility of having dynamic objects connected to interface elements like sliders, menus, check-boxes, radio-buttons and the like. All these features are fully integrated into the Mathematica programming environment and allow the implementation of a modern user interface.

  17. Graphical means for inspecting qualitative models of system behaviour

    NARCIS (Netherlands)

    Bouwer, A.; Bredeweg, B.

    2010-01-01

    This article presents the design and evaluation of a tool for inspecting conceptual models of system behaviour. The basis for this research is the Garp framework for qualitative simulation. This framework includes modelling primitives, such as entities, quantities and causal dependencies, which are

  18. User's manual for the Graphical Constituent Loading Analysis System (GCLAS)

    Science.gov (United States)

    Koltun, G.F.; Eberle, Michael; Gray, J.R.; Glysson, G.D.

    2006-01-01

    This manual describes the Graphical Constituent Loading Analysis System (GCLAS), an interactive cross-platform program for computing the mass (load) and average concentration of a constituent that is transported in stream water over a period of time. GCLAS computes loads as a function of an equal-interval streamflow time series and an equal- or unequal-interval time series of constituent concentrations. The constituent-concentration time series may be composed of measured concentrations or a combination of measured and estimated concentrations. GCLAS is not intended for use in situations where concentration data (or an appropriate surrogate) are collected infrequently or where an appreciable amount of the concentration values are censored. It is assumed that the constituent-concentration time series used by GCLAS adequately represents the true time-varying concentration. Commonly, measured constituent concentrations are collected at a frequency that is less than ideal (from a load-computation standpoint), so estimated concentrations must be inserted in the time series to better approximate the expected chemograph. GCLAS provides tools to facilitate estimation and entry of instantaneous concentrations for that purpose. Water-quality samples collected for load computation frequently are collected in a single vertical or at single point in a stream cross section. Several factors, some of which may vary as a function of time and (or) streamflow, can affect whether the sample concentrations are representative of the mean concentration in the cross section. GCLAS provides tools to aid the analyst in assessing whether concentrations in samples collected in a single vertical or at single point in a stream cross section exhibit systematic bias with respect to the mean concentrations. In cases where bias is evident, the analyst can construct coefficient relations in GCLAS to reduce or eliminate the observed bias. GCLAS can export load and concentration data in formats

  19. Advances in Human-Computer Interaction: Graphics and Animation Components for Interface Design

    Science.gov (United States)

    Cipolla Ficarra, Francisco V.; Nicol, Emma; Cipolla-Ficarra, Miguel; Richardson, Lucy

    We present an analysis of communicability methodology in graphics and animation components for interface design, called CAN (Communicability, Acceptability and Novelty). This methodology has been under development between 2005 and 2010, obtaining excellent results in cultural heritage, education and microcomputing contexts. In studies where there is a bi-directional interrelation between ergonomics, usability, user-centered design, software quality and the human-computer interaction. We also present the heuristic results about iconography and layout design in blogs and websites of the following countries: Spain, Italy, Portugal and France.

  20. A low-cost system for graphical process monitoring with colour video symbol display units

    International Nuclear Information System (INIS)

    Grauer, H.; Jarsch, V.; Mueller, W.

    1977-01-01

    A system for computer controlled graphic process supervision, using color symbol video displays is described. It has the following characteristics: - compact unit: no external memory for image storage - problem oriented simple descriptive cut to the process program - no restriction of the graphical representation of process variables - computer and display independent, by implementation of colours and parameterized code creation for the display. (WB) [de

  1. Nuclear reactors; graphical symbols

    International Nuclear Information System (INIS)

    1987-11-01

    This standard contains graphical symbols that reveal the type of nuclear reactor and is used to design graphical and technical presentations. Distinguishing features for nuclear reactors are laid down in graphical symbols. (orig.) [de

  2. A distributed, graphical user interface based, computer control system for atomic physics experiments.

    Science.gov (United States)

    Keshet, Aviv; Ketterle, Wolfgang

    2013-01-01

    Atomic physics experiments often require a complex sequence of precisely timed computer controlled events. This paper describes a distributed graphical user interface-based control system designed with such experiments in mind, which makes use of off-the-shelf output hardware from National Instruments. The software makes use of a client-server separation between a user interface for sequence design and a set of output hardware servers. Output hardware servers are designed to use standard National Instruments output cards, but the client-server nature should allow this to be extended to other output hardware. Output sequences running on multiple servers and output cards can be synchronized using a shared clock. By using a field programmable gate array-generated variable frequency clock, redundant buffers can be dramatically shortened, and a time resolution of 100 ns achieved over effectively arbitrary sequence lengths.

  3. A distributed, graphical user interface based, computer control system for atomic physics experiments

    Science.gov (United States)

    Keshet, Aviv; Ketterle, Wolfgang

    2013-01-01

    Atomic physics experiments often require a complex sequence of precisely timed computer controlled events. This paper describes a distributed graphical user interface-based control system designed with such experiments in mind, which makes use of off-the-shelf output hardware from National Instruments. The software makes use of a client-server separation between a user interface for sequence design and a set of output hardware servers. Output hardware servers are designed to use standard National Instruments output cards, but the client-server nature should allow this to be extended to other output hardware. Output sequences running on multiple servers and output cards can be synchronized using a shared clock. By using a field programmable gate array-generated variable frequency clock, redundant buffers can be dramatically shortened, and a time resolution of 100 ns achieved over effectively arbitrary sequence lengths.

  4. Symptomatic knee disorders in floor layers and graphic designers. A cross-sectional study

    Directory of Open Access Journals (Sweden)

    Jensen Lilli

    2012-09-01

    Full Text Available Abstract Background Previous studies have described an increased risk of developing tibio-femoral osteoarthritis (TF OA, meniscal tears and bursitis among those with a trade as floor layers. The purpose of this study was to analyse symptomatic knee disorders among floor layers that were highly exposed to kneeling work tasks compared to graphic designers without knee-demanding work tasks. Methods Data on the Knee injury and Osteoarthritis Outcome Score (KOOS were collected by questionnaires. In total 134 floor layers and 120 graphic designers had a bilateral radiographic knee examination to detect TF OA and patella-femoral (PF OA. A random sample of 92 floor layers and 49 graphic designers had Magnetic Resonance Imaging (MRI of both knees to examine meniscal tears. Means of the subscales of KOOS were compared by analysis of variance. The risk ratio of symptomatic knee disorders defined as a combination of radiological detected knee OA or MRI-detected meniscal tears combined with a low KOOS score was estimated by logistic regression in floor layers with 95% confidence interval (CI and adjusted for age, body mass index, traumas, and knee-straining sports activities. Symptomatic knee OA or meniscal tears were defined as a combination of low KOOS-scores and radiographic or MRI pathology. Results Symptomatic TF and medial meniscal tears were found in floor layers compared to graphic designers with odds ratios 2.6 (95%CI 0.99-6.9 and 2.04 (95% CI 0.77-5.5, respectively. There were no differences in PF OA. Floor layers scored significantly lower on all KOOS subscales compared to graphic designers. Significantly lower scores on the KOOS subscales were also found for radiographic TF and PF OA regardless of trade but not for meniscal tears. Conclusions The study showed an overall increased risk of developing symptomatic TF OA in a group of floor layers with a substantial amount of kneeling work positions. Prevention would be appropriate to reduce the

  5. Development of Data Acquisition System for nuclear thermal hydraulic out-of-pile facility using the graphical programming methods

    Energy Technology Data Exchange (ETDEWEB)

    Bouaichaoui, Youcef; Berrahal, Abderezak; Halbaoui, Khaled [Birine Nuclear Research Center/CRNB/COMENA/ALGERIA, BO 180, Ain Oussera, 17200, Djelfa (Algeria)

    2015-07-01

    This paper describes the design of data acquisition system (DAQ) that is connected to a PC and development of a feedback control system that maintains the coolant temperature of the process at a desired set point using a digital controller system based on the graphical programming language. The paper will provide details about the data acquisition unit, shows the implementation of the controller, and present test results. (authors)

  6. Use of a graphical user interface approach for digital and physical simulation in power systems control education

    International Nuclear Information System (INIS)

    Shoults, R.R.; Barrera-Cardiel, E.

    1992-01-01

    This paper presents the design of a laboratory with software and hardware structures for digital and physical simulation in the area of Power Systems Control Education. The hardware structure includes a special man-machine interface designed with a graphical user interface approach. This interface allows the user full control over the simulation and provides facilities for the study of the response of the simulated system. This approach is illustrated with the design of a control system for a physically based HVDC transmission system model

  7. Short report on the evaluation of a graphical user interface for radiation therapy planning systems

    International Nuclear Information System (INIS)

    Martin, M.B.

    1993-01-01

    Since their introduction graphical user interfaces for computing applications have generally appealed more to users than command-line or menu interfaces. Benefits from using a graphical interface include ease-of-use, ease-of-under-standing and increased productivity. For a radiation therapy planning application, an additional potential benefit is that the user regards the planning activity as a closer simulation of the real world situation. A prototype radiation therapy planning system incorporating a graphical user interface was developed on an Apple Macintosh microcomputer. Its graphic interface was then evaluated by twenty-six participants. The results showed markedly that the features associated with a graphic user interface were preferred. 6 refs., 3 figs., 1 tab

  8. On the use of polar coordinate system in the projective graphic drawings

    Directory of Open Access Journals (Sweden)

    Ivashchenko Andrey Viktorovich

    2016-11-01

    Full Text Available Projective graphics is a polyhedra simulation method, which is based on the use of trace diagrams of initial polyhedron. Previously developed computer software allows using Cartesian coordinates. In some cases it is advisable to use polar coordinate system for description of projective graphics drawings. Using the example of icosahedron the authors analyzed the advantages of using projective graphics drawings in the polar coordinate system. The transition to the polar coordinate system is a tool that allows using certain patterns of projective graphics drawings in the process of calculation. When using polar coordinate system the search of Polar correspondence for the directs is simplified. In order to analyze the two lines in the polar coordinate system it is enough to compare the corresponding coefficients of the equations of these lines. The authors consider a diagram of the icosahedron in polar coordinates, and a corresponding fragment of calculation program in the Mathematica system. Some examples of forming based on icosahedrons are offered. Optimization of computer programs using polar coordinate system will simplifies the calculations of projective graphics drawings, accelerates the process of constructing three-dimensional models, which expand the possibilities of selecting original solutions. Finally, the authors conclude that it is appropriate to use the polar coordinate system only in the construction of projective graphics diagrams of the planes system having rich symmetry. All Platonic and Archimedean solids, Catalan solid possess this property.

  9. Network, system, and status software enhancements for the autonomously managed electrical power system breadboard. Volume 4: Graphical status display

    Science.gov (United States)

    Mckee, James W.

    1990-01-01

    This volume (4 of 4) contains the description, structured flow charts, prints of the graphical displays, and source code to generate the displays for the AMPS graphical status system. The function of these displays is to present to the manager of the AMPS system a graphical status display with the hot boxes that allow the manager to get more detailed status on selected portions of the AMPS system. The development of the graphical displays is divided into two processes; the creation of the screen images and storage of them in files on the computer, and the running of the status program which uses the screen images.

  10. Fault tree graphics

    International Nuclear Information System (INIS)

    Bass, L.; Wynholds, H.W.; Porterfield, W.R.

    1975-01-01

    Described is an operational system that enables the user, through an intelligent graphics terminal, to construct, modify, analyze, and store fault trees. With this system, complex engineering designs can be analyzed. This paper discusses the system and its capabilities. Included is a brief discussion of fault tree analysis, which represents an aspect of reliability and safety modeling

  11. An object-oriented implementation of a graphical-programming system

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, G.S.; Hanson, K.M.; Jennings, G.R. Jr.; Wolf, D.R.

    1994-04-01

    Object-oriented (OO) analysis, design, and programming is a powerful paradigm for creating software that is easily understood, modified, and maintained. In this paper the authors demonstrate how the OO concepts of abstraction, inheritance, encapsulation, polymorphism, and dynamic binding have aided in the design of a graphical-programming tool. The tool that they have developed allows a user to build radiographic system models for computing simulated radiographic data. It will eventually be used to perform Bayesian reconstructions of objects given radiographic data. The models are built by connecting icons that represent physical transformations, such as line integrals, exponentiation, and convolution, on a canvas. They will also briefly discuss ParcPlace`s application development environment, VisualWorks, which they have found to be as helpful as the OO paradigm.

  12. An object-oriented implementation of a graphical-programming system

    International Nuclear Information System (INIS)

    Cunningham, G.S.; Hanson, K.M.; Jennings, G.R. Jr.; Wolf, D.R.

    1994-01-01

    Object-oriented (OO) analysis, design, and programming is a powerful paradigm for creating software that is easily understood, modified, and maintained. In this paper the authors demonstrate how the OO concepts of abstraction, inheritance, encapsulation, polymorphism, and dynamic binding have aided in the design of a graphical-programming tool. The tool that they have developed allows a user to build radiographic system models for computing simulated radiographic data. It will eventually be used to perform Bayesian reconstructions of objects given radiographic data. The models are built by connecting icons that represent physical transformations, such as line integrals, exponentiation, and convolution, on a canvas. They will also briefly discuss ParcPlace's application development environment, VisualWorks, which they have found to be as helpful as the OO paradigm

  13. The graphics editor in ROOT

    International Nuclear Information System (INIS)

    Antcheva, Ilka; Brun, Rene; Hof, Carsten; Rademakers, Fons

    2006-01-01

    A well-designed Graphical User Interface (GUI) has critical importance in any computer application. The user interface is where the end users and the complex system intersect. An effective interface design can make a powerful and complex system, such as ROOT, easy and intuitive to learn and operate. This paper describes the main goals we defined and the design solution we found developing the graphics editor in ROOT

  14. Simulation of Specular Surface Imaging Based on Computer Graphics: Application on a Vision Inspection System

    Directory of Open Access Journals (Sweden)

    Seulin Ralph

    2002-01-01

    Full Text Available This work aims at detecting surface defects on reflecting industrial parts. A machine vision system, performing the detection of geometric aspect surface defects, is completely described. The revealing of defects is realized by a particular lighting device. It has been carefully designed to ensure the imaging of defects. The lighting system simplifies a lot the image processing for defect segmentation and so a real-time inspection of reflective products is possible. To bring help in the conception of imaging conditions, a complete simulation is proposed. The simulation, based on computer graphics, enables the rendering of realistic images. Simulation provides here a very efficient way to perform tests compared to the numerous attempts of manual experiments.

  15. Graphic and haptic simulation system for virtual laparoscopic rectum surgery.

    Science.gov (United States)

    Pan, Jun J; Chang, Jian; Yang, Xiaosong; Zhang, Jian J; Qureshi, Tahseen; Howell, Robert; Hickish, Tamas

    2011-09-01

    Medical simulators with vision and haptic feedback techniques offer a cost-effective and efficient alternative to the traditional medical trainings. They have been used to train doctors in many specialties of medicine, allowing tasks to be practised in a safe and repetitive manner. This paper describes a virtual-reality (VR) system which will help to influence surgeons' learning curves in the technically challenging field of laparoscopic surgery of the rectum. Data from MRI of the rectum and real operation videos are used to construct the virtual models. A haptic force filter based on radial basis functions is designed to offer realistic and smooth force feedback. To handle collision detection efficiently, a hybrid model is presented to compute the deformation of intestines. Finally, a real-time cutting technique based on mesh is employed to represent the incision operation. Despite numerous research efforts, fast and realistic solutions of soft tissues with large deformation, such as intestines, prove extremely challenging. This paper introduces our latest contribution to this endeavour. With this system, the user can haptically operate with the virtual rectum and simultaneously watch the soft tissue deformation. Our system has been tested by colorectal surgeons who believe that the simulated tactile and visual feedbacks are realistic. It could replace the traditional training process and effectively transfer surgical skills to novices. Copyright © 2011 John Wiley & Sons, Ltd.

  16. The Effect of National and International Culture on Logo Design of Iran’s Graphic Art

    OpenAIRE

    Monirifar, Maryam

    2015-01-01

    Art is an intellectual accumulation, which is unique to the society where it exists, and it is shaped by that land’s culture. In the other words, art is not an element, which can be taken from other cultures directly and applied to a society. On the other hand, communication instruments play a significant role in transferring the cultural and artistic heritage, which are the basis of a country. Furthermore, graphic design is a language which conveys a message, it is an identification of the c...

  17. Design and construction of a graphical interface for automatic generation of simulation code GEANT4

    International Nuclear Information System (INIS)

    Driss, Mozher; Bouzaine Ismail

    2007-01-01

    This work is set in the context of the engineering studies final project; it is accomplished in the center of nuclear sciences and technologies in Sidi Thabet. This project is about conceiving and developing a system based on graphical user interface which allows an automatic codes generation for simulation under the GEANT4 engine. This system aims to facilitate the use of GEANT4 by scientific not necessary expert in this engine and to be used in different areas: research, industry and education. The implementation of this project uses Root library and several programming languages such as XML and XSL. (Author). 5 refs

  18. Development of MCAERO wing design panel method with interactive graphics module

    Science.gov (United States)

    Hawk, J. D.; Bristow, D. R.

    1984-01-01

    A reliable and efficient iterative method has been developed for designing wing section contours corresponding to a prescribed subcritical pressure distribution. The design process is initialized by using MCAERO (MCAIR 3-D Subsonic Potential Flow Analysis Code) to analyze a baseline configuration. A second program DMCAERO is then used to calculate a matrix containing the partial derivative of potential at each control point with respect to each unknown geometry parameter by applying a first-order expansion to the baseline equations in MCAERO. This matrix is calculated only once but is used in each iteration cycle to calculate the geometry perturbation and to analyze the perturbed geometry. The potential on the new geometry is calculated by linear extrapolation from the baseline solution. This extrapolated potential is converted to velocity by numerical differentiation, and velocity is converted to pressure by using Bernoulli's equation. There is an interactive graphics option which allows the user to graphically display the results of the design process and to interactively change either the geometry or the prescribed pressure distribution.

  19. Numerical methods to calculate solar radiation, validation through a new Graphic User Interface design

    International Nuclear Information System (INIS)

    Mesri, Mokhtaria

    2015-01-01

    Highlights: • Rare measuring networks in the developing world due to technical and fiscal reasons. • Insufficient attention is paid regarding to tools for solar energy systems design. • The new interface offers solutions to the insisting need for innovative decisions. • Comprehensive comparative studies are conducted using experimental measurements. • Results are with attractive margins of error in accordance with experimental data. - Abstract: The present paper is basically devoted to the estimation of solar radiation in order to provide data on the situation of solar applications in a given site; it also aims at contributing to the performance improvement of solar energy systems. I aim to show and evaluate the performance of the most appropriate models used to recover solar components at ground level, via confronting meteorological techniques to selected semi empirical methods. I have adopted an innovative approach to testing the theory through numerical simulation by providing a friendly user ergonomic Graphic User Interface ‘GUI’, carefully designed and that principally makes use of a large range of models for the calculation of solar components. In this article I may consider three numerical models namely: Lacis and Hansen, Atwater and Ball and Lui and Jordon, which are used here to elucidate the performance of such methods facing meteorological models such as those of Angstrom, Garg and Coppolino. I debate the advantages of these latest methods, and I argue that they are of big importance because the main variable that is used is sunshine duration. Some of them involve the water content in the atmosphere, a particularly important parameter which strongly absorbs solar radiation in the infrared region. They are also perfectly suited for locations where solar irradiance is not being measured by all hydrometeorological stations, and where only meteorological data are collected. I want to complete this paper by demonstrating the efficiency of the

  20. Design and construction of an automatic measurement electronic system and graphical neutron flux for the subcritical reactor; Diseno y construccion de un sistema electronico automatico de medicion y graficado del flujo neutronico para el reactor subcritico

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, J.L.; Balderas, E.G.; Rivero G, T. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    The National Institute of Nuclear Research (ININ) has in its installations with a nuclear subcritical reactor which was designed and constructed with the main purpose to be used in the nuclear sciences education in the Physics areas and Reactors engineering. Within the nuclear experiments that can be realized in this reactor are very interesting those about determinations of neutron and gamma fluxes spectra, since starting from these some interesting nuclear parameters can be obtained. In order to carry out this type of experiments different radioactive sources are used which exceed the permissible doses by far to human beings. Therefore it is necessary the remote handling as of the source as of detectors used in different experiments. In this work it is presented the design of an electronic system which allows the different positions inside of the tank of subcritical reactor at ININ over the radial and axial axes in manual or automatic ways. (Author)

  1. A MATLAB Graphical User Interface Dedicated to the Optimal Design of the High Power Induction Motor with Heavy Starting Conditions

    Directory of Open Access Journals (Sweden)

    Maria Brojboiu

    2014-09-01

    Full Text Available In this paper, a Matlab graphical user interface dedicated to the optimal design of the high power induction motor with heavy starting conditions is presented. This graphical user interface allows to input the rated parameters, the selection of the induction motor type and the optimization criterion of the induction motor design also. For the squirrel cage induction motor the graphical user interface allows the selection of the rotor bar geometry, the material of the rotor bar as well as the fastening technology of the shorting ring on the rotor bar. The Matlab graphical user interface is developed and applied to the general optimal design program of the induction motor described in [1], [2].

  2. MR Imaging of Degenerative Cartilage Lesions of the Knee Joint in Floor Layers and Graphic Designers

    DEFF Research Database (Denmark)

    Rytter, Søren; Thomsen, Birthe Lykke; Christensen, Birgitte Schütt

    2016-01-01

    Introduction: Kneeling work leads to an additional risk of developing knee osteoarthritis (OA). Previous studies have primarily been based on radiography, but radiography is limited by its inability to visualize articular cartilage, in which the earliest signs of OA occur. The objective of this e......Introduction: Kneeling work leads to an additional risk of developing knee osteoarthritis (OA). Previous studies have primarily been based on radiography, but radiography is limited by its inability to visualize articular cartilage, in which the earliest signs of OA occur. The objective...... of this explorative study, based on available data, was to examine the prevalence of magnetic resonance imaging (MRI)-detected knee cartilage lesions in male floor layers exposed to kneeling work, as compared to non-exposed male graphic designers. Methods: MRI of the knees was conducted in 92 floor layers and 49...... tibiofemoral posterior area, the most strained area during kneeling and 2) the total knee. Presence of lesions was compared in floor layers and graphic designers after adjusting for age, BMI, seniority, knee injuries, and sports activity in logistic regression analyses for correlated data, and investigated...

  3. Learning From Mah Jong - Towards a Multi-Agent System That Can Recognize Graphic Units

    NARCIS (Netherlands)

    Achten, H.H.; Jessurun, A.J.; Chiu, Mao-Lin; Kvan, J.-Y.; Morozumi, M.; Jeng, T.-S.

    2003-01-01

    Sketching is a major means of exploiting the first conceptual developments in architectural design. If we want to support the architect in the ideas-developing phase of design, then we need to understand the conventions of depiction and encoding in drawings. The theory of graphic units provides an

  4. The Effectiveness of Using Interactive Multimedia Based on Motion Graphic in Concept Mastering Enhancement and Fashion Designing Skill in Digital Format

    Directory of Open Access Journals (Sweden)

    Winwin Wiana

    2018-02-01

    Full Text Available This research is related to the effort to design a more representative learning system to improve the learning result of digital fashion design, through the development of interactive multimedia based on motion graphic. This research is aimed to know the effect of interactive multimedia application based on motion graphic to increase the mastery of the concept and skill of the students to making fashion designing in digital format. The research method used is quasi experiment with research design of Nonequivalent Control Group Design. The lectures are conducted in two different classes, namely class A as the Experimental Class and class B as the Control Class. From the calculation result after interpreted using Normalize Gain, there is an increase of higher learning result in student with interactive learning based on motion graphic, compared with student achievement on conventional learning. In this research, interactive multimedia learning based on motion graphic is effective toward the improvement of student learning in concept mastering indicator and on the aspect of making fashion design in digital format.

  5. Perception in statistical graphics

    Science.gov (United States)

    VanderPlas, Susan Ruth

    There has been quite a bit of research on statistical graphics and visualization, generally focused on new types of graphics, new software to create graphics, interactivity, and usability studies. Our ability to interpret and use statistical graphics hinges on the interface between the graph itself and the brain that perceives and interprets it, and there is substantially less research on the interplay between graph, eye, brain, and mind than is sufficient to understand the nature of these relationships. The goal of the work presented here is to further explore the interplay between a static graph, the translation of that graph from paper to mental representation (the journey from eye to brain), and the mental processes that operate on that graph once it is transferred into memory (mind). Understanding the perception of statistical graphics should allow researchers to create more effective graphs which produce fewer distortions and viewer errors while reducing the cognitive load necessary to understand the information presented in the graph. Taken together, these experiments should lay a foundation for exploring the perception of statistical graphics. There has been considerable research into the accuracy of numerical judgments viewers make from graphs, and these studies are useful, but it is more effective to understand how errors in these judgments occur so that the root cause of the error can be addressed directly. Understanding how visual reasoning relates to the ability to make judgments from graphs allows us to tailor graphics to particular target audiences. In addition, understanding the hierarchy of salient features in statistical graphics allows us to clearly communicate the important message from data or statistical models by constructing graphics which are designed specifically for the perceptual system.

  6. Influence of graphic design of the text on reading quality of pupils with dyslexia

    Directory of Open Access Journals (Sweden)

    Zikl Pavel

    2016-01-01

    Full Text Available The contribution contains research results focused on reading quality of pupils with dyslexia according to the graphic design of the text. Our aim was to prove if commonly recommended graphic text editing has a certain influence on reading speed and occurrence of mistakes of children with dyslexia. The research sample consisted of pupils with dyslexia and a control group then selected in pairs of intact pupils of 4th and 5th class of primary school (in total 150 pupils. For the purpose of data collection there had been a text used in an unfamiliar language (a nonsensical text, which corresponds to the Czech language in its structure; is a part of standardized reading test. There were four text versions prepared for the research which had been modified into frequently recommended modifications for dyslexics (increased font size, a use of bigger gaps between words and also rows, syllables highlight in words and a standard text corresponding to common reading-books. Conclusion depicts a presentation of impacts of individual texts modifications and also subjective opinions of pupils about these texts.

  7. An intelligent interlock design support system

    International Nuclear Information System (INIS)

    Hayashi, Toshifumi; Kamiyama, Masahiko

    1990-01-01

    This paper presents an intelligent interlock design support system, called Handy. BWR plant interlocks have been designed on a conventional CAD system operating on a mini-computer based time sharing system. However, its ability to support interlock designers is limited, mainly due to the system not being capable of manipulating the interlock logic. Handy improves the design efficiency with consistent manipulation of the logic and drawings, interlock simulation, versatile database management, object oriented user interface, high resolution high speed graphics, and automatic interlock outlining with a design support expert system. Handy is now being tested by designers, and is expected to greatly contribute to their efficiency. (author)

  8. A graphical criterion for working fluid selection and thermodynamic system comparison in waste heat recovery

    International Nuclear Information System (INIS)

    Xi, Huan; Li, Ming-Jia; He, Ya-Ling; Tao, Wen-Quan

    2015-01-01

    In the present study, we proposed a graphical criterion called CE diagram by achieving the Pareto optimal solutions of the annual cash flow and exergy efficiency. This new graphical criterion enables both working fluid selection and thermodynamic system comparison for waste heat recovery. It's better than the existing criterion based on single objective optimization because it is graphical and intuitionistic in the form of diagram. The features of CE diagram were illustrated by studying 5 examples with different heat-source temperatures (ranging between 100 °C to 260 °C), 26 chlorine-free working fluids and two typical ORC systems including basic organic Rankine cycle(BORC) and recuperative organic Rankine cycle (RORC). It is found that the proposed graphical criterion is feasible and can be applied to any closed loop waste heat recovery thermodynamic systems and working fluids. - Highlights: • A graphical method for ORC system comparison/working fluid selection was proposed. • Multi-objectives genetic algorithm (MOGA) was applied for optimizing ORC systems. • Application cases were performed to demonstrate the usage of the proposed method.

  9. Recomendações sobre design informacional aplicado em motion graphics

    Directory of Open Access Journals (Sweden)

    André Luiz Fronza

    2014-01-01

    Full Text Available Tendo sua origem no cinema, o motion graphics tornou-se uma linguagem audiovisual bastante difundida a partir dos anos 1990 devido ao avanço tecnológico na área da computação gráfica. É caracterizado por concentrar-se em uma área de criação que permite a combinação e manipulação de ilustrações, elementos gráficos, fotografia e vídeos, num determinado espaço-tempo unido ao uso de música e efeitos sonoros. Neste contexto, o presente artigo relata a pesquisa que objetivou identificar se, para o público jovem, o motion graphicstransmite informações com maior efetividade do que um material estático. Também buscou-se compreender o processo de criação e concepção do motion graphics, tendo o intuito de futuramente formular um guia para os profissionais da área a fim de auxiliá-los no processo de organização visual e cognitiva da mensagem em projetos desse tipo. Para alcance dos objetivos propostos, foi realizada uma pesquisa d e caráter misto, do tipo exploratória, utilizando dados quantitativos obtidos a partir de um questionário fechado aplicado a alunos de Ensino Médio e informações qualitativas provindas de dois focus group com estudantes de Design. Constatou-se que há diferenças na percepção de informações estáticas em comparação às animadas (motion graphics e que o motion designer, ao projetar uma animação,deve ter primor na aplicação dos princípios básicos que concernem o design da informação.

  10. Systems Biology Graphical Notation: Entity Relationship language Level 1 Version 2

    Directory of Open Access Journals (Sweden)

    Sorokin Anatoly

    2015-06-01

    Full Text Available The Systems Biological Graphical Notation (SBGN is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD, Entity Relationship (ER and Activity Flow (AF, allow for the representation of different aspects of biological and biochemical systems at different levels of detail.

  11. Systems Biology Graphical Notation: Activity Flow language Level 1 Version 1.2

    Directory of Open Access Journals (Sweden)

    Mi Huaiyu

    2015-06-01

    Full Text Available The Systems Biological Graphical Notation (SBGN is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD, Entity Relationship (ER and Activity Flow (AF, allow for the representation of different aspects of biological and biochemical systems at different levels of detail.

  12. Steamer Training System and Graphics Editor, 1987 Version

    Science.gov (United States)

    1987-09-01

    NIIHAU : >simenv>documentation>simenv-read me.text.24 7/30/87 18:29:51 Page 1 SMode: Text-- Herewith are instructions for installing the Genera 7.0 (should...lowercase: t; package: file-system; - (set-logical-pathname-host "simenv" : physical-host " niihau " :translations ((C"simenv;" ">3imenv>") steamer-system...translations ;;--- mode: lisp; base: 10; lowercase: t; package: file-system;-- (fS:set-logical-pathname-host "steamer-system" :physical-host " niihau

  13. Graphical Interfaces for Simulation.

    Science.gov (United States)

    Hollan, J. D.; And Others

    This document presents a discussion of the development of a set of software tools to assist in the construction of interfaces to simulations and real-time systems. Presuppositions to the approach to interface design that was used are surveyed, the tools are described, and the conclusions drawn from these experiences in graphical interface design…

  14. Standardization of a Graphic Symbol System as an Alternative Communication Tool for Turkish

    Science.gov (United States)

    Karal, Yasemin; Karal, Hasan; Silbir, Lokman; Altun, Taner

    2016-01-01

    Graphic symbols are commonly used across countries in order to support individuals with communicative deficiency. The literature review revealed the absence of such a system for Turkish socio-cultural context. In this study, the aim was to develop a symbol system appropriate for the Turkish socio-cultural context. The process began with studies…

  15. Password Cracking on Graphics Processing Unit Based Systems

    OpenAIRE

    N. Gopalakrishna Kini; Ranjana Paleppady; Akshata K. Naik

    2015-01-01

    Password authentication is one of the widely used methods to achieve authentication for legal users of computers and defense against attackers. There are many different ways to authenticate users of a system and there are many password cracking methods also developed. This paper proposes how best password cracking can be performed on a CPU-GPGPU based system. The main objective of this work is to project how quickly a password can be cracked with some knowledge about the ...

  16. An adaptive structure data acquisition system using a graphical-based programming language

    Science.gov (United States)

    Baroth, Edmund C.; Clark, Douglas J.; Losey, Robert W.

    1992-01-01

    An example of the implementation of data fusion using a PC and a graphical programming language is discussed. A schematic of the data acquisition system and user interface panel for an adaptive structure test are presented. The computer programs (a series of icons 'wired' together) are also discussed. The way in which using graphical-based programming software to control a data acquisition system can simplify analysis of data, promote multidisciplinary interaction, and provide users a more visual key to understanding their data are shown.

  17. Model Verification and Validation Using Graphical Information Systems Tools

    Science.gov (United States)

    2013-07-31

    Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law , no person shall be...12 Geomorphic Measurements...to a model. Ocean flows, which are organized E-2 current systems, transport heat and salinity and cause water to pile up as a water surface

  18. A Framework for the Design of Effective Graphics for Scientific Visualization

    Science.gov (United States)

    Miceli, Kristina D.

    1992-01-01

    This proposal presents a visualization framework, based on a data model, that supports the production of effective graphics for scientific visualization. Visual representations are effective only if they augment comprehension of the increasing amounts of data being generated by modern computer simulations. These representations are created by taking into account the goals and capabilities of the scientist, the type of data to be displayed, and software and hardware considerations. This framework is embodied in an assistant-based visualization system to guide the scientist in the visualization process. This will improve the quality of the visualizations and decrease the time the scientist is required to spend in generating the visualizations. I intend to prove that such a framework will create a more productive environment for tile analysis and interpretation of large, complex data sets.

  19. SYSTEM EDUCATION CONCEPTS OF THE SUBJECT AND ITS GRAPHIC REPRESENTATION

    Directory of Open Access Journals (Sweden)

    Артём Авенирович Михайлюк

    2017-12-01

    Full Text Available The article draws attention to the fact that the teacher in the course of constructing the course of the subject there is a need for systematization and structuring of the system of concepts of the academic subject, which is the basis of the future course. The choice of the system of concepts and ways to represent it depends on the period of the course and the cognitive abilities of the students. The presentation of a system of concepts in the form of infographics can help a teacher to develop a training course faster and more efficiently, and to teach it to his students. Beautiful clear graphs and diagrams are better perceived and remembered. And modern information technology allows you to create and share knowledge and research results in a spectacular, long- remembered form. And we must match time, and moreover, teach children to work with information in such a way that it would be desirable to look at it. In the process of such training, the teacher and students are formed interest in the subject, developing visual thinking.

  20. Printing--Graphic Arts--Graphic Communications

    Science.gov (United States)

    Hauenstein, A. Dean

    1975-01-01

    Recently, "graphic arts" has shifted from printing skills to a conceptual approach of production processes. "Graphic communications" must embrace the total system of communication through graphic media, to serve broad career education purposes; students taught concepts and principles can be flexible and adaptive. The author…

  1. Use of graphics in the design office at the Military Aircraft Division of the British Aircraft Corporation

    Science.gov (United States)

    Coles, W. A.

    1975-01-01

    The CAD/CAM interactive computer graphics system was described; uses to which it has been put were shown, and current developments of the system were outlined. The system supports batch, time sharing, and fully interactive graphic processing. Engineers using the system may switch between these methods of data processing and problem solving to make the best use of the available resources. It is concluded that the introduction of on-line computing in the form of teletypes, storage tubes, and fully interactive graphics has resulted in large increases in productivity and reduced timescales in the geometric computing, numerical lofting and part programming areas, together with a greater utilization of the system in the technical departments.

  2. Perceptions of undergraduate Graphic Design students on the educational potential of Facebook

    Directory of Open Access Journals (Sweden)

    Nicos Souleles

    2012-09-01

    Full Text Available The popularity of Facebook among university students inevitably raises questions on the educational potential of this Social Networking Site for Higher Education. From the limited literature on the instructional uses of Facebook, one can draw conflicting conclusions. Benefits were identified through the communicative potential, student participation in study groups and through informal learning, i.e. learning that takes place outside the formal structures of the learning environment. In contrast, it is also argued that the instructional benefits of Facebook are not straightforward. This phenomenographic investigation examines the perceptions of undergraduate Graphic Design students in a higher education institution in Cyprus, on the use of Facebook for teaching and learning. Characteristic of Art and Design education is the centrality of the studio and student self-reflection. Despite some literature that considers Facebook provides a viable alternative to the physical studio, the participants in this investigation expressed a preference for face-to-face instruction and consider Facebook as complimenting rather than replacing studio practices. Some participants benefited from the use of Facebook by joining support groups and exploring information relevant to their studies. Further research can investigate how Facebook can be embedded in studio-based teaching and learning.

  3. Beacon Editor: Capturing Signal Transduction Pathways Using the Systems Biology Graphical Notation Activity Flow Language.

    Science.gov (United States)

    Elmarakeby, Haitham; Arefiyan, Mostafa; Myers, Elijah; Li, Song; Grene, Ruth; Heath, Lenwood S

    2017-12-01

    The Beacon Editor is a cross-platform desktop application for the creation and modification of signal transduction pathways using the Systems Biology Graphical Notation Activity Flow (SBGN-AF) language. Prompted by biologists' requests for enhancements, the Beacon Editor includes numerous powerful features for the benefit of creation and presentation.

  4. Creating, Storing, and Dumping Low and High Resolution Graphics on the Apple IIe Microcomputer System.

    Science.gov (United States)

    Fletcher, Richard K., Jr.

    This description of procedures for dumping high and low resolution graphics using the Apple IIe microcomputer system focuses on two special hardware configurations that are commonly used in schools--the Apple Dot Matrix Printer with the Apple Parallel Interface Card, and the Imagewriter Printer with the Apple Super Serial Interface Card. Special…

  5. GUIDON-WATCH: A Graphic Interface for Viewing a Knowledge-Based System. Technical Report #14.

    Science.gov (United States)

    Richer, Mark H.; Clancey, William J.

    This paper describes GUIDON-WATCH, a graphic interface that uses multiple windows and a mouse to allow a student to browse a knowledge base and view reasoning processes during diagnostic problem solving. The GUIDON project at Stanford University is investigating how knowledge-based systems can provide the basis for teaching programs, and this…

  6. Use of Graphic Systems in the Routine of a Regular Classroom with a Disabled Student

    Science.gov (United States)

    Deliberato, Débora; Nunes, Leila Regina d'Oliveira Paula

    2015-01-01

    The school environment adapted to the diversity of students is an important goal, but it is a challenge when it comes to the diversity of students with disabilities. The aim of this study was to describe the use of graphic systems in the routine of a preschool classroom through a collaborative program. The study included a teacher, 22 children of…

  7. Graphic Representation of Organs and Organ Systems: Psychological View and Developmental Patterns

    Science.gov (United States)

    Bartoszeck, Amauri Betini; Machado, Danielle Zagonel; Amann-Gainotti, Merete

    2011-01-01

    The objective of this exploratory study is to characterize by means of drawings if the developmental patterns in the graphic representation of organ and organ systems progresses related to age of participants. Secondly, whether there is an integration of sex organs into the internal body image. The drawings representing the inside of the body in…

  8. Knowledge-based systems and interactive graphics for reactor control using the Automated Reasoning Tool(ART) system

    International Nuclear Information System (INIS)

    Ragheb, M.; Clayton, B.; Davies, P.

    1987-01-01

    The use of Knowledge-Based systems and advanced graphic concepts are described using the Automated Reasoning Tool (ART) for a model nuclear plant system. Through the sue of asynchronous graphic input/output, the user is allowed to communicate through a graphical display to a Production-Rule Analysis System modelling the plant while its rules are actively being fired. The user changes the status of system components by pointing at them on the system configuration display with a mouse cursor and clicking one of the buttons on the mouse. The Production-Rule Analysis System accepts the new input and immediately displays its diagnosis of the system state and any associated recommendations as to the appropriate course of action. This approach offers a distinct advantage over typing the components statuses in response to queries by a conventional Production-Rule Analysis system. Moreover, two effective ways of communication between man and machine are combined

  9. Integrated graphical user interface for the back-end software sub-system

    International Nuclear Information System (INIS)

    Badescu, E.; Caprini, M.

    2001-01-01

    The ATLAS data acquisition and Event Filter prototype '-1' project was intended to produce a prototype system for evaluating candidate technologies and architectures for the final ATLAS DAQ system on the LHC accelerator at CERN. Within the prototype project, the back-end sub-system encompasses the software for configuring, controlling and monitoring the data acquisition (DAQ). The back-end sub-system includes core components and detector integration components. One of the detector integration components is the Integrated Graphical User Interface (IGUI), which is intended to give a view of the status of the DAQ system and its sub-systems (Dataflow, Event Filter and Back-end) and to allow the user (general users, such as a shift operator at a test beam or experts, in order to control and debug the DAQ system) to control its operation. The IGUI is intended to be a Status Display and a Control Interface too, so there are three groups of functional requirements: display requirements (the information to be displayed); control requirements (the actions the IGUI shall perform on the DAQ components); general requirements, applying to the general functionality of the IGUI. The constraint requirements include requirements related to the access control (shift operator or expert user). The quality requirements are related to the portability on different platforms. The IGUI has to interact with many components in a distributed environment. The following design guidelines have been considered in order to fulfil the requirements: use a modular design with easy possibility to integrate different sub-systems; use Java language for portability and powerful graphical features; use CORBA interfaces for communication with other components. The actual implementation of Back-end software components use Inter-Language Unification (ILU) for inter-process communication. Different methods of access of Java applications to ILU C++ servers have been evaluated (native methods, ILU Java support

  10. A Prototype Lisp-Based Soft Real-Time Object-Oriented Graphical User Interface for Control System Development

    Science.gov (United States)

    Litt, Jonathan; Wong, Edmond; Simon, Donald L.

    1994-01-01

    A prototype Lisp-based soft real-time object-oriented Graphical User Interface for control system development is presented. The Graphical User Interface executes alongside a test system in laboratory conditions to permit observation of the closed loop operation through animation, graphics, and text. Since it must perform interactive graphics while updating the screen in real time, techniques are discussed which allow quick, efficient data processing and animation. Examples from an implementation are included to demonstrate some typical functionalities which allow the user to follow the control system's operation.

  11. Graphical programming at Sandia National Laboratories

    International Nuclear Information System (INIS)

    McDonald, M.J.; Palmquist, R.D.; Desjarlais, L.

    1993-09-01

    Sandia has developed an advanced operational control system approach, called Graphical Programming, to design, program, and operate robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. Graphical Programming also provides an efficient and easy-to-use interface to traditional robot systems for use in setup and programming tasks. This paper provides an overview of the Graphical Programming approach and lists key features of Graphical Programming systems. Graphical Programming uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Programming Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control

  12. Difficulties of Student Teachers in the Engineering Graphics and Design Course at a South African University: Snapshot on Sectional Drawing

    Science.gov (United States)

    Makgato, Moses; Khoza, Samuel D.

    2016-01-01

    Engineering Graphics and Design (EGD) is a university course that teaches a medium of communication in the form of drawings. This study was undertaken to investigate factors associated with the difficulties experienced by student teachers in the sectional drawing component of the EGD course. Purposive sampling was used to select 40 students…

  13. Secondary Engineering Design Graphics Educator Service Load of Students with Identified Categorical Disabilities and Limited English Proficiency

    Science.gov (United States)

    Ernst, Jeremy V.; Li, Songze; Williams, Thomas O.

    2014-01-01

    The ever-changing student population of engineering design graphics students necessitates broader sets of instructor adeptness. Specifically, preparedness to educate and provide adequate educational access to content for students with identified categorical disabilities and Limited English Proficiency (LEP) is now an essential readiness skill for…

  14. Resurfacing Graphics

    Directory of Open Access Journals (Sweden)

    Prof. Patty K. Wongpakdee

    2013-06-01

    Full Text Available “Resurfacing Graphics” deals with the subject of unconventional design, with the purpose of engaging the viewer to experience the graphics beyond paper’s passive surface. Unconventional designs serve to reinvigorate people, whose senses are dulled by the typical, printed graphics, which bombard them each day. Today’s cutting-edge designers, illustrators and artists utilize graphics in a unique manner that allows for tactile interaction. Such works serve as valuable teaching models and encourage students to do the following: 1 investigate the trans-disciplines of art and technology; 2 appreciate that this approach can have a positive effect on the environment; 3 examine and research other approaches of design communications and 4 utilize new mediums to stretch the boundaries of artistic endeavor. This paper examines how visuals communicators are “Resurfacing Graphics” by using atypical surfaces and materials such as textile, wood, ceramics and even water. Such non-traditional transmissions of visual language serve to demonstrate student’s overreliance on paper as an outdated medium. With this exposure, students can become forward-thinking, eco-friendly, creative leaders by expanding their creative breadth and continuing the perpetual exploration for new ways to make their mark. 

  15. Resurfacing Graphics

    Directory of Open Access Journals (Sweden)

    Prof. Patty K. Wongpakdee

    2013-06-01

    Full Text Available “Resurfacing Graphics” deals with the subject of unconventional design, with the purpose of engaging the viewer to experience the graphics beyond paper’s passive surface. Unconventional designs serve to reinvigorate people, whose senses are dulled by the typical, printed graphics, which bombard them each day. Today’s cutting-edge designers, illustrators and artists utilize graphics in a unique manner that allows for tactile interaction. Such works serve as valuable teaching models and encourage students to do the following: 1 investigate the trans-disciplines of art and technology; 2 appreciate that this approach can have a positive effect on the environment; 3 examine and research other approaches of design communications and 4 utilize new mediums to stretch the boundaries of artistic endeavor. This paper examines how visuals communicators are “Resurfacing Graphics” by using atypical surfaces and materials such as textile, wood, ceramics and even water. Such non-traditional transmissions of visual language serve to demonstrate student’s overreliance on paper as an outdated medium. With this exposure, students can become forward-thinking, eco-friendly, creative leaders by expanding their creative breadth and continuing the perpetual exploration for new ways to make their mark.

  16. Graphical user interfaces for teaching and design of GRIN lenses in optical interconnections

    International Nuclear Information System (INIS)

    Gómez-Varela, A I; Bao-Varela, C

    2015-01-01

    The use of graphical user interfaces (GUIs) enables the implementation of practical teaching methodologies to make the comprehension of a given subject easier. GUIs have become common tools in science and engineering education, where very often, the practical implementation of experiences in a laboratory involves much equipment and many people; they are an efficient and inexpensive solution to the lack of resources. The aim of this work is to provide primarily physics and engineering students with a series of GUIs to teach some configurations in optical communications using gradient-index (GRIN) lenses. The reported GUIs are intended to perform a complementary role in education as part of a ‘virtual lab’ to supplement theoretical and practical sessions and to reinforce the knowledge acquired by the students. In this regard, a series of GUIs to teach and research the implementation of GRIN lenses in optical communications applications (including a GRIN light deflector and a beam-size controller, a GRIN fibre lens for fibre-coupling purposes, planar interconnectors, and an anamorphic self-focusing lens to correct astigmatism in laser diodes) was designed using the environment GUIDE developed by MATLAB. Numerical examples using available commercial GRIN lens parameter values are presented. (paper)

  17. Computer graphics at VAX JINR

    International Nuclear Information System (INIS)

    Balashov, V.K.

    1991-01-01

    The structure of the software for computer graphics at VAX JINR is described. It consists of graphical packages GKS, WAND and a set graphicals packages for High Energy Physics application designed at CERN. 17 refs.; 1 tab

  18. Knee complaints and consequences on work status; a 10-year follow-up survey among floor layers and graphic designers.

    Science.gov (United States)

    Rytter, Søren; Jensen, Lilli Kirkeskov; Bonde, Jens Peter

    2007-09-18

    The purpose of the study was to examine if knee complaints among floor layers predict exclusion from the trade. In 1994/95 self-reported data were obtained from a cohort of floor layers and graphic designers with and without knee straining work activities, respectively. At follow-up in 2005 the questionnaire survey was repeated. The study population consisted of 81 floor layers and 173 graphic designers who were presently working in their trades at baseline (1995). All participants were men aged 36-70 years in 2005. We computed the risk of losing gainful employment in the trade according to occurrence of knee complaints at baseline, using Cox proportional hazard regression adjusted for a number of potential confounding variables. Moreover, the crude and adjusted odds risk ratio for knee complaints according to status of employment in the trade were computed, using graphic designers as reference. A positive but non-significant association between knee complaints lasting more than 30 days the past 12 months and exclusion from the trade was found among floor layers (Hazard Ratio = 1.4, 95% CI = 0.6-3.5).The frequency of self-reported knee complaints was lower among floor layers presently at work in the trade in year 2005 (26.3%) compared with baseline in 1995 (41.1%), while the opposite tendency was seen among graphic designers (20.7% vs. 10.7%). The study suggests that knee complaints are a risk factor for premature exclusion from a knee demanding trade. However, low power of the study precludes strong conclusions. The study also indicates a healthy worker effect among floor layers and a survivor effect among graphic designers.

  19. Development of the operator training system using computer graphics. Pt. 2. Operator behavior CG system and its applications

    International Nuclear Information System (INIS)

    Sasou, Kunihide; Ebisu, Mitsuhiro; Takano, Kenichi; Watabe, Kazuyuki

    2003-01-01

    In training, it has been important to show good performance of operators dealing with abnormal operating; condition simulated by a training simulator. Video-taping of the scenario-based performance by instructors of a training center is the most common way. However, it is difficult for the experienced instructors to show good performance due to the stress of being video-taped. Therefore, the authors developed a system named Operator Behavior Computer Graphic System (OBCGS) to computer-graphically show the behavior of operators. The input data of this system are data on operation, watching, walking and utterances with time, objects of operation and watching, contents of their behavior, etc. The system temporally uses the output data of Man Machine Simulator developed by CRIEPI. OBCGS has 3 kinds of user interfaces. The first one computer-graphically shows 3 operators and one shift supervisor behaving in the control room from a bird's eye viewpoint. The second one has multi windows to show details of computer graphics of operators and control panels. The last one shows the history of operations, warnings and utterance. The system shows reasonable computer graphics in quality from the viewpoint of showing good performance of operations. This report also describes how to use the OBCGS and ways of application to the operator training. (author)

  20. Motion and landscape : Otl Aicher, Günther Grzimek and the graphic and garden designs of the 1972 Munich Olympics.

    OpenAIRE

    Schiller, Kay; Young, Christopher

    2010-01-01

    This article focuses on Otl Aicher's design and Günther Grzimek's garden architecture for the 1972 Munich Olympics. We argue that the functionalist aesthetics of the Munich Olympic site should be interpreted as a translation into graphic and landscape design of 1960s progressivism in West German society and democracy. In the process Aicher and Grzimek somewhat paradoxically drew on the tradition of the Olympic Gesamtkunstwerk inaugurated in Berlin in 1936.

  1. HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 3: HARP Graphics Oriented (GO) input user's guide

    Science.gov (United States)

    Bavuso, Salvatore J.; Rothmann, Elizabeth; Mittal, Nitin; Koppen, Sandra Howell

    1994-01-01

    The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems, and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical preprocessor Graphics Oriented (GO) program. GO is a graphical user interface for the HARP engine that enables the drawing of reliability/availability models on a monitor. A mouse is used to select fault tree gates or Markov graphical symbols from a menu for drawing.

  2. Designing information systems

    CERN Document Server

    Blethyn, Stanley G

    2014-01-01

    Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

  3. Isolating Graphical Failure-Inducing Input for Privacy Protection in Error Reporting Systems

    Directory of Open Access Journals (Sweden)

    Matos João

    2016-04-01

    Full Text Available This work proposes a new privacy-enhancing system that minimizes the disclosure of information in error reports. Error reporting mechanisms are of the utmost importance to correct software bugs but, unfortunately, the transmission of an error report may reveal users’ private information. Some privacy-enhancing systems for error reporting have been presented in the past years, yet they rely on path condition analysis, which we show in this paper to be ineffective when it comes to graphical-based input. Knowing that numerous applications have graphical user interfaces (GUI, it is very important to overcome such limitation. This work describes a new privacy-enhancing error reporting system, based on a new input minimization algorithm called GUIᴍɪɴ that is geared towards GUI, to remove input that is unnecessary to reproduce the observed failure. Before deciding whether to submit the error report, the user is provided with a step-by-step graphical replay of the minimized input, to evaluate whether it still yields sensitive information. We also provide an open source implementation of the proposed system and evaluate it with well-known applications.

  4. Graphical explanation in an expert system for Space Station Freedom rack integration

    Science.gov (United States)

    Craig, F. G.; Cutts, D. E.; Fennel, T. R.; Purves, B.

    1990-01-01

    The rationale and methodology used to incorporate graphics into explanations provided by an expert system for Space Station Freedom rack integration is examined. The rack integration task is typical of a class of constraint satisfaction problems for large programs where expertise from several areas is required. Graphically oriented approaches are used to explain the conclusions made by the system, the knowledge base content, and even at more abstract levels the control strategies employed by the system. The implemented architecture combines hypermedia and inference engine capabilities. The advantages of this architecture include: closer integration of user interface, explanation system, and knowledge base; the ability to embed links to deeper knowledge underlying the compiled knowledge used in the knowledge base; and allowing for more direct control of explanation depth and duration by the user. The graphical techniques employed range from simple statis presentation of schematics to dynamic creation of a series of pictures presented motion picture style. User models control the type, amount, and order of information presented.

  5. RadShield: semiautomated shielding design using a floor plan driven graphical user interface.

    Science.gov (United States)

    DeLorenzo, Matthew C; Wu, Dee H; Yang, Kai; Rutel, Isaac B

    2016-09-08

    The purpose of this study was to introduce and describe the development of RadShield, a Java-based graphical user interface (GUI), which provides a base design that uniquely performs thorough, spatially distributed calculations at many points and reports the maximum air-kerma rate and barrier thickness for each barrier pursuant to NCRP Report 147 methodology. Semiautomated shielding design calculations are validated by two approaches: a geometry-based approach and a manual approach. A series of geometry-based equations were derived giv-ing the maximum air-kerma rate magnitude and location through a first derivative root finding approach. The second approach consisted of comparing RadShield results with those found by manual shielding design by an American Board of Radiology (ABR)-certified medical physicist for two clinical room situations: two adjacent catheterization labs, and a radiographic and fluoroscopic (R&F) exam room. RadShield's efficacy in finding the maximum air-kerma rate was compared against the geometry-based approach and the overall shielding recommendations by RadShield were compared against the medical physicist's shielding results. Percentage errors between the geometry-based approach and RadShield's approach in finding the magnitude and location of the maximum air-kerma rate was within 0.00124% and 14 mm. RadShield's barrier thickness calculations were found to be within 0.156 mm lead (Pb) and 0.150 mm lead (Pb) for the adjacent catheteriza-tion labs and R&F room examples, respectively. However, within the R&F room example, differences in locating the most sensitive calculation point on the floor plan for one of the barriers was not considered in the medical physicist's calculation and was revealed by the RadShield calculations. RadShield is shown to accurately find the maximum values of air-kerma rate and barrier thickness using NCRP Report 147 methodology. Visual inspection alone of the 2D X-ray exam distribution by a medical physicist may not

  6. Interactive Computer Graphics for Analysis and Design of Control Systems.

    Science.gov (United States)

    1985-12-01

    Post-multiplies AMAT by BMAT and stores the 4 result in CMAT. If AMAT and BMAT do not conform, the routine aborts. CALLS: none B-23 -.. v...27 .-. . . . . . . . . . . . . . . . . . -. L- ’. *. .*. .. - MODULE NAME: MADD .SL DESCRIPTION: Adds or subtracts matrices, 0MAT = AMAT + BMAT or 0MAT...AMAT - BMAT . If AMAT and BMAT do not have the same dimensions, the routine aborts. CALLS: none MODULE NAME: MAGLABEL FILE NAME: FRPLT.FOR AUTHOR

  7. Computer-aided system design

    Science.gov (United States)

    Walker, Carrie K.

    1991-01-01

    A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

  8. Computer graphics testbed to simulate and test vision systems for space applications

    Science.gov (United States)

    Cheatham, John B.

    1991-01-01

    Artificial intelligence concepts are applied to robotics. Artificial neural networks, expert systems and laser imaging techniques for autonomous space robots are being studied. A computer graphics laser range finder simulator developed by Wu has been used by Weiland and Norwood to study use of artificial neural networks for path planning and obstacle avoidance. Interest is expressed in applications of CLIPS, NETS, and Fuzzy Control. These applications are applied to robot navigation.

  9. The graphics system and the data saving for the SAPHIR experiment

    International Nuclear Information System (INIS)

    Albold, D.

    1990-08-01

    Important extensions have been made to the data acquisition system SOS for the SAPHIR experiment at the Bonn ELSA facilities. As support for various online-programs, controlling components of the detector, a graphic system for presenting data was developed. This enables any program in the system to use all graphic devices. Main component is a program serving requests for presentation on a 19 inch color monitor. Window-technique allows a presentation of several graphics on one screen. Equipped with a trackball and using menus, this is an easy to use and powerful tool in controlling the experiment. Other important extensions concern data storage. A huge amount of event data can be stored on 8 mm cassettes by the program Eventsaver. This program can be controlled by a component of the SAPHIR-Online SOL running on a VAX-Computer and using windows and menus. The smaller amount of data, containing parameters and programs, which should be accessible within a small period of time, can be stored on a magnetic disk. A program supporting a file-structure for access to this disk is described. (orig./HSI) [de

  10. A computer graphics display technique for the examination of aircraft design data

    Science.gov (United States)

    Talcott, N. A., Jr.

    1981-01-01

    An interactive computer graphics technique has been developed for quickly sorting and interpreting large amounts of aerodynamic data. It utilizes a graphic representation rather than numbers. The geometry package represents the vehicle as a set of panels. These panels are ordered in groups of ascending values (e.g., equilibrium temperatures). The groups are then displayed successively on a CRT building up to the complete vehicle. A zoom feature allows for displaying only the panels with values between certain limits. The addition of color allows a one-time display thus eliminating the need for a display build up.

  11. A Prototype Educational Model for Hepatobiliary Interventions: Unveiling the Role of Graphic Designers in Medical 3D Printing.

    Science.gov (United States)

    Javan, Ramin; Zeman, Merissa N

    2018-02-01

    In the context of medical three-dimensional (3D) printing, in addition to 3D reconstruction from cross-sectional imaging, graphic design plays a role in developing and/or enhancing 3D-printed models. A custom prototype modular 3D model of the liver was graphically designed depicting segmental anatomy of the parenchyma containing color-coded hepatic vasculature and biliary tree. Subsequently, 3D printing was performed using transparent resin for the surface of the liver and polyamide material to develop hollow internal structures that allow for passage of catheters and wires. A number of concepts were incorporated into the model. A representative mass with surrounding feeding arterial supply was embedded to demonstrate tumor embolization. A straight narrow hollow tract connecting the mass to the surface of the liver, displaying the path of a biopsy device's needle, and the concept of needle "throw" length was designed. A connection between the middle hepatic and right portal veins was created to demonstrate transjugular intrahepatic portosystemic shunt (TIPS) placement. A hollow amorphous structure representing an abscess was created to allow the demonstration of drainage catheter placement with the formation of pigtail tip. Percutaneous biliary drain and cholecystostomy tube placement were also represented. The skills of graphic designers may be utilized in creating highly customized 3D-printed models. A model was developed for the demonstration and simulation of multiple hepatobiliary interventions, for training purposes, patient counseling and consenting, and as a prototype for future development of a functioning interventional phantom.

  12. Beyond the Staff: “Alternative” Systems in the Graphical Representation of Organized Sound

    Directory of Open Access Journals (Sweden)

    Enrique Cámara de Landa

    2016-02-01

    Full Text Available In this article, a reflection on the limits of the staff in the representation of organized sound is briefly presented, followed by the consideration of the proposals that some ethnomusicologists have developed to highlight particular aspects of music. Some antecedents are provided, such as the synoptic transcription (Constantin Brăiloiu and the paradigmatic transcription (Nicolas Ruwet. Other proposals will be discussed, like the graphical representation of musical structure (Bernard Lortat-Jacob, Hugo Zemp or the use of spectrograms (Charles Seeger, Mireille Hellfer, Lortat-Jacob, Grazia Tuzi, graphic devices (Charles Adams, musemes (Philip Tagg, sonograms (Enrique Cámara, frame by frame musical transcription (Gerhard Kubik, and local systems of notation. According to these proposals, the graphical representation of music beyond the staff maintains its efficiency in current ethnomusicology (with different objectives and even different targets. Moreover, I will argue that it is necessary to take into consideration the place occupied by the use of these tools in the tensions and interactions between etic and emic perspectives, and the need to reconcile the internal consistency required for any system of visual representation of sound, with the need to make permanently flexible proposals based on intercultural dialogue.

  13. Development of a System to Assist Automatic Translation of Hand-Drawn Maps into Tactile Graphics and Its Usability Evaluation

    Directory of Open Access Journals (Sweden)

    Jianjun Chen

    2014-01-01

    Full Text Available Tactile graphics are images that use raised surfaces so that a visually impaired person can feel them. Tactile maps are used by blind and partially sighted people when navigating around an environment, and they are also used prior to a visit for orientation purposes. Since the ability to read tactile graphics deeply depends on individuals, providing tactile graphics individually is needed. This implies that producing tactile graphics should be as simple as possible. Based on this background, we are developing a system for automating production of tactile maps from hand-drawn figures. In this paper, we first present a pattern recognition method for hand-drawn maps. The usability of our system is then evaluated by comparing it with the two different methods to produce tactile graphics.

  14. The Use of Graphics to Communicate Findings of Longitudinal Data in Design-Based Research

    Science.gov (United States)

    Francis, Krista; Jacobsen, Michele; Friesen, Sharon

    2014-01-01

    Visuals and graphics have been used for communicating complex ideas since 1786 when William Playfair first invented the line graph and bar chart. Graphs and charts are useful for interpretation and making sense of data. For instance, John Snow's scatter plot helped pinpoint the source of a cholera outbreak in London in 1854 and also changed…

  15. Graphics in DAQSIM

    International Nuclear Information System (INIS)

    Wang, C.C.; Booth, A.W.; Chen, Y.M.; Botlo, M.

    1993-06-01

    At the Superconducting Super Collider Laboratory (SSCL) a tool called DAQSIM has been developed to study the behavior of Data Acquisition (DAQ) systems. This paper reports and discusses the graphics used in DAQSIM. DAQSIM graphics includes graphical user interface (GUI), animation, debugging, and control facilities. DAQSIM graphics not only provides a convenient DAQ simulation environment, it also serves as an efficient manager in simulation development and verification

  16. System analysis and design

    International Nuclear Information System (INIS)

    Son, Seung Hui

    2004-02-01

    This book deals with information technology and business process, information system architecture, methods of system development, plan on system development like problem analysis and feasibility analysis, cases for system development, comprehension of analysis of users demands, analysis of users demands using traditional analysis, users demands analysis using integrated information system architecture, system design using integrated information system architecture, system implementation, and system maintenance.

  17. The effect of graphic design materials on the retention level of viewers in prime time television newscasts

    OpenAIRE

    Ertep, Rifat Hakan

    1996-01-01

    Ankara : Institute of Economics and Social Sciences, Bilkent Univ., 1996. Thesis (Ph.D.) -- Bilkent University, 1996. Includes bibliographical references. This study investigates the role of graphic design materials in improving the recall and retention level of television news viewers, and examines the capacity and power of these materials to shape or distort people's perception of reality. To this end, two experiments have been conducted with the aim of providing an emp...

  18. Configurable software for satellite graphics

    Energy Technology Data Exchange (ETDEWEB)

    Hartzman, P D

    1977-12-01

    An important goal in interactive computer graphics is to provide users with both quick system responses for basic graphics functions and enough computing power for complex calculations. One solution is to have a distributed graphics system in which a minicomputer and a powerful large computer share the work. The most versatile type of distributed system is an intelligent satellite system in which the minicomputer is programmable by the application user and can do most of the work while the large remote machine is used for difficult computations. At New York University, the hardware was configured from available equipment. The level of system intelligence resulted almost completely from software development. Unlike previous work with intelligent satellites, the resulting system had system control centered in the satellite. It also had the ability to reconfigure software during realtime operation. The design of the system was done at a very high level using set theoretic language. The specification clearly illustrated processor boundaries and interfaces. The high-level specification also produced a compact, machine-independent virtual graphics data structure for picture representation. The software was written in a systems implementation language; thus, only one set of programs was needed for both machines. A user can program both machines in a single language. Tests of the system with an application program indicate that is has very high potential. A major result of this work is the demonstration that a gigantic investment in new hardware is not necessary for computing facilities interested in graphics.

  19. Design Aids for Real-Time Systems (DARTS)

    Science.gov (United States)

    Szulewski, P. A.

    1982-01-01

    Design-Aids for Real-Time Systems (DARTS) is a tool that assists in defining embedded computer systems through tree structured graphics, military standard documentation support, and various analyses including automated Software Science parameter counting and metrics calculation. These analyses provide both static and dynamic design quality feedback which can potentially aid in producing efficient, high quality software systems.

  20. An X window based graphics user interface for radiation information processing system developed with object-oriented programming technology

    International Nuclear Information System (INIS)

    Gao Wenhuan; Fu Changqing; Kang Kejun

    1993-01-01

    X Window is a network-oriented and network transparent windowing system, and now dominant in the Unix domain. The object-oriented programming technology can be used to change the extensibility of a software system remarkably. An introduction to graphics user interface is given. And how to develop a graphics user interface for radiation information processing system with object-oriented programming technology, which is based on X Window and independent of application is described briefly

  1. A multi-agent Mah Jong playing system : towards real-time recognition of graphic units in graphic representations

    NARCIS (Netherlands)

    Achten, H.H.; Jessurun, A.J.

    2003-01-01

    In architectural design, sketching is an important means to explore the first conceptual developments in the design process. It is necessary to understand the conventions of depiction and encoding in sketches and drawings if we want to support the architect in the sketching activity. The theory of

  2. The PC graphics handbook

    CERN Document Server

    Sanchez, Julio

    2003-01-01

    Part I - Graphics Fundamentals PC GRAPHICS OVERVIEW History and Evolution Short History of PC Video PS/2 Video Systems SuperVGA Graphics Coprocessors and Accelerators Graphics Applications State-of-the-Art in PC Graphics 3D Application Programming Interfaces POLYGONAL MODELING Vector and Raster Data Coordinate Systems Modeling with Polygons IMAGE TRANSFORMATIONS Matrix-based Representations Matrix Arithmetic 3D Transformations PROGRAMMING MATRIX TRANSFORMATIONS Numeric Data in Matrix Form Array Processing PROJECTIONS AND RENDERING Perspective The Rendering Pipeline LIGHTING AND SHADING Lightin

  3. Stereoscopic 3D graphics generation

    Science.gov (United States)

    Li, Zhi; Liu, Jianping; Zan, Y.

    1997-05-01

    Stereoscopic display technology is one of the key techniques of areas such as simulation, multimedia, entertainment, virtual reality, and so on. Moreover, stereoscopic 3D graphics generation is an important part of stereoscopic 3D display system. In this paper, at first, we describe the principle of stereoscopic display and summarize some methods to generate stereoscopic 3D graphics. Secondly, to overcome the problems which came from the methods of user defined models (such as inconvenience, long modifying period and so on), we put forward the vector graphics files defined method. Thus we can design more directly; modify the model simply and easily; generate more conveniently; furthermore, we can make full use of graphics accelerator card and so on. Finally, we discuss the problem of how to speed up the generation.

  4. SEPI an expert system for plant design

    International Nuclear Information System (INIS)

    Carotenuto, M.; Corleto, P.; Landeyro, P.

    1988-01-01

    The availability and suitability of technological information is of great importance in every kind of design task, especially when safety and reliability considerations are involved. In this paper an ''expert system for plant design'' (SEPI), is presented, together with its first application to nuclear back-end plants. This system is available on ENEA computer network. It is thought to be used both to collect know-how developed in the field and to assist unskilled designers during selection, evaluation and dimensioning tasks. It attemps to reproduce the normal way of ''reasoning'' and acting, and provides some graphic facilities

  5. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  6. Development of the operator training system using computer graphics. Pt. 1. Defining the system configuration and developing basic techniques

    International Nuclear Information System (INIS)

    Takana, Kenchi; Sasou, Kunihide; Sano, Toshiaki; Suzuki, Koichi; Noji, Kunio

    2001-01-01

    Efficient and concurrent operator training seems to be crucial in near future because of an increase in operators to be trained due to generation alternations. Ever developed Man -Machine-Simulator (MMS) has several merits: (1) Operators' cognitive and behavioral activities among team in emergency could be simulated based on the concurrent mental model; (2) Simulated scenarios could be expanded to multiple malfunctions events, to all of which procedures could not be stipulated previously, (3) Standard behavior in coping with anomalies including communication and operations could be presented. This paper describes the development of an operator training system by applying this MMS. Three dimensional computer graphics (3D-CG) was adopted for improving the training effects and attracting operators' interest by visually presenting realistic operating team behavior in the main control room. Towards the completion of the operator training system, following designs of system configuration and developments of several basic techniques were availed: (1) Imaging the utilization of the operator training system, functions to be equipped and system configurations for realizing functions were determined. And three of scenarios were chosen in order to appeal the merits of the MMS and to raise training effects. (2) Knowledge base was completed to execute simulations. And connection between operator team model and plant simulator, that is the 2nd generation type simulator of the BTC -4, was executed to obtain simulation results (time sequential log data of plant dynamics and operating team behavior). (3) Operator's actions seen in VCR tapes in real training were classified for eighteen kinds of fundamental categories and those fundamental actions were modeled on 3D-CG using the People Shop software. The 3D-CG of main control panel was prepared using Multi Gen software. (author)

  7. A Microscopic Optically Tracking Navigation System That Uses High-resolution 3D Computer Graphics.

    Science.gov (United States)

    Yoshino, Masanori; Saito, Toki; Kin, Taichi; Nakagawa, Daichi; Nakatomi, Hirofumi; Oyama, Hiroshi; Saito, Nobuhito

    2015-01-01

    Three-dimensional (3D) computer graphics (CG) are useful for preoperative planning of neurosurgical operations. However, application of 3D CG to intraoperative navigation is not widespread because existing commercial operative navigation systems do not show 3D CG in sufficient detail. We have developed a microscopic optically tracking navigation system that uses high-resolution 3D CG. This article presents the technical details of our microscopic optically tracking navigation system. Our navigation system consists of three components: the operative microscope, registration, and the image display system. An optical tracker was attached to the microscope to monitor the position and attitude of the microscope in real time; point-pair registration was used to register the operation room coordinate system, and the image coordinate system; and the image display system showed the 3D CG image in the field-of-view of the microscope. Ten neurosurgeons (seven males, two females; mean age 32.9 years) participated in an experiment to assess the accuracy of this system using a phantom model. Accuracy of our system was compared with the commercial system. The 3D CG provided by the navigation system coincided well with the operative scene under the microscope. Target registration error for our system was 2.9 ± 1.9 mm. Our navigation system provides a clear image of the operation position and the surrounding structures. Systems like this may reduce intraoperative complications.

  8. Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

    Science.gov (United States)

    Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

    2015-09-04

    The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

  9. Systems Biology Graphical Notation: Activity Flow language Level 1 Version 1.2.

    Science.gov (United States)

    Mi, Huaiyu; Schreiber, Falk; Moodie, Stuart; Czauderna, Tobias; Demir, Emek; Haw, Robin; Luna, Augustin; Le Novère, Nicolas; Sorokin, Anatoly; Villéger, Alice

    2015-09-04

    The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Activity Flow language represents the influences of activities among various entities within a network. Unlike SBGN PD and ER that focus on the entities and their relationships with others, SBGN AF puts the emphasis on the functions (or activities) performed by the entities, and their effects to the functions of the same or other entities. The nodes (elements) describe the biological activities of the entities, such as protein kinase activity, binding activity or receptor activity, which can be easily mapped to Gene Ontology molecular function terms. The edges (connections) provide descriptions of relationships (or influences) between the activities, e.g., positive influence and negative influence. Among all three languages of SBGN, AF is the closest to signaling pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

  10. Systems Biology Graphical Notation: Entity Relationship language Level 1 Version 2.

    Science.gov (United States)

    Sorokin, Anatoly; Le Novère, Nicolas; Luna, Augustin; Czauderna, Tobias; Demir, Emek; Haw, Robin; Mi, Huaiyu; Moodie, Stuart; Schreiber, Falk; Villéger, Alice

    2015-09-04

    The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Entity Relationship language (ER) represents biological entities and their interactions and relationships within a network. SBGN ER focuses on all potential relationships between entities without considering temporal aspects. The nodes (elements) describe biological entities, such as proteins and complexes. The edges (connections) provide descriptions of interactions and relationships (or influences), e.g., complex formation, stimulation and inhibition. Among all three languages of SBGN, ER is the closest to protein interaction networks in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

  11. Automated graphic image generation system for effective representation of infectious disease surveillance data.

    Science.gov (United States)

    Inoue, Masashi; Hasegawa, Shinsaku; Suyama, Akihiko; Meshitsuka, Shunsuke

    2003-11-01

    Infectious disease surveillance schemes have been established to detect infectious disease outbreak in the early stages, to identify the causative viral strains, and to rapidly assess related morbidity and mortality. To make a scheme function well, two things are required. Firstly, it must have sufficient sensitivity and be timely to guarantee as short a delay as possible from collection to redistribution of information. Secondly, it must provide a good representation of the results of the surveillance. To do this, we have developed a database system that can redistribute the information via the Internet. The feature of this system is to automatically generate the graphic images based on the numerical data stored in the database by using Hypertext Preprocessor (PHP) script and Graphics Drawing (GD) library. It dynamically displays the information as a map or bar chart as well as a numerical impression according to the real time demand of the users. This system will be a useful tool for medical personnel and researchers working on infectious disease problems and will save significant time in the redistribution of information.

  12. Graphical user interface for input output characterization of single variable and multivariable highly nonlinear systems

    Directory of Open Access Journals (Sweden)

    Shahrukh Adnan Khan M. D.

    2017-01-01

    Full Text Available This paper presents a Graphical User Interface (GUI software utility for the input/output characterization of single variable and multivariable nonlinear systems by obtaining the sinusoidal input describing function (SIDF of the plant. The software utility is developed on MATLAB R2011a environment. The developed GUI holds no restriction on the nonlinearity type, arrangement and system order; provided that output(s of the system is obtainable either though simulation or experiments. An insight to the GUI and its features are presented in this paper and example problems from both single variable and multivariable cases are demonstrated. The formulation of input/output behavior of the system is discussed and the nucleus of the MATLAB command underlying the user interface has been outlined. Some of the industries that would benefit from this software utility includes but not limited to aerospace, defense technology, robotics and automotive.

  13. Clothing Systems Design Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Clothing Systems Design Lab houses facilities for the design and rapid prototyping of military protective apparel.Other focuses include: creation of patterns and...

  14. Reactor System Design

    International Nuclear Information System (INIS)

    Chi, S. K.; Kim, G. K.; Yeo, J. W.

    2006-08-01

    SMART NPP(Nuclear Power Plant) has been developed for duel purpose, electricity generation and energy supply for seawater desalination. The objective of this project IS to design the reactor system of SMART pilot plant(SMART-P) which will be built and operated for the integrated technology verification of SMART. SMART-P is an integral reactor in which primary components of reactor coolant system are enclosed in single pressure vessel without connecting pipes. The major components installed within a vessel includes a core, twelve steam generator cassettes, a low-temperature self pressurizer, twelve control rod drives, and two main coolant pumps. SMART-P reactor system design was categorized to the reactor coe design, fluid system design, reactor mechanical design, major component design and MMIS design. Reactor safety -analysis and performance analysis were performed for developed SMART=P reactor system. Also, the preparation of safety analysis report, and the technical support for licensing acquisition are performed

  15. Real-time graphic display system for ROSA-V Large Scale Test Facility

    International Nuclear Information System (INIS)

    Kondo, Masaya; Anoda, Yoshinari; Osaki, Hideki; Kukita, Yutaka; Takigawa, Yoshio.

    1993-11-01

    A real-time graphic display system was developed for the ROSA-V Large Scale Test Facility (LSTF) experiments simulating accident management measures for prevention of severe core damage in pressurized water reactors (PWRs). The system works on an IBM workstation (Power Station RS/6000 model 560) and accommodates 512 channels out of about 2500 total measurements in the LSTF. It has three major functions: (a) displaying the coolant inventory distribution in the facility primary and secondary systems; (b) displaying the measured quantities at desired locations in the facility; and (c) displaying the time histories of measured quantities. The coolant inventory distribution is derived from differential pressure measurements along vertical sections and gamma-ray densitometer measurements for horizontal legs. The color display indicates liquid subcooling calculated from pressure and temperature at individual locations. (author)

  16. Optical system design

    CERN Document Server

    Fischer, Robert F

    2008-01-01

    Honed for more than 20 years in an SPIE professional course taught by renowned optical systems designer Robert E. Fischer, Optical System Design, Second Edition brings you the latest cutting-edge design techniques and more than 400 detailed diagrams that clearly illustrate every major procedure in optical design. This thoroughly updated resource helps you work better and faster with computer-aided optical design techniques, diffractive optics, and the latest applications, including digital imaging, telecommunications, and machine vision. No need for complex, unnecessary mathematical derivations-instead, you get hundreds of examples that break the techniques down into understandable steps. For twenty-first century optical design without the mystery, the authoritative Optical Systems Design, Second Edition features: Computer-aided design use explained through sample problems Case studies of third-millennium applications in digital imaging, sensors, lasers, machine vision, and more New chapters on optomechanic...

  17. EASI graphics - Version II

    International Nuclear Information System (INIS)

    Allensworth, J.A.

    1984-04-01

    EASI (Estimate of Adversary Sequence Interruption) is an analytical technique for measuring the effectiveness of physical protection systems. EASI Graphics is a computer graphics extension of EASI which provides a capability for performing sensitivity and trade-off analyses of the parameters of a physical protection system. This document reports on the implementation of the Version II of EASI Graphics and illustrates its application with some examples. 5 references, 15 figures, 6 tables

  18. A NEW EXHAUST VENTILATION SYSTEM DESIGN SOFTWARE

    Directory of Open Access Journals (Sweden)

    H. Asilian Mahabady

    2007-09-01

    Full Text Available A Microsoft Windows based ventilation software package is developed to reduce time-consuming and boring procedure of exhaust ventilation system design. This program Assure accurate and reliable air pollution control related calculations. Herein, package is tentatively named Exhaust Ventilation Design Software which is developed in VB6 programming environment. Most important features of Exhaust Ventilation Design Software that are ignored in formerly developed packages are Collector design and fan dimension data calculations. Automatic system balance is another feature of this package. Exhaust Ventilation Design Software algorithm for design is based on two methods: Balance by design (Static pressure balance and design by Blast gate. The most important section of software is a spreadsheet that is designed based on American Conference of Governmental Industrial Hygienists calculation sheets. Exhaust Ventilation Design Software is developed so that engineers familiar with American Conference of Governmental Industrial Hygienists datasheet can easily employ it for ventilation systems design. Other sections include Collector design section (settling chamber, cyclone, and packed tower, fan geometry and dimension data section, a unit converter section (that helps engineers to deal with units, a hood design section and a Persian HTML help. Psychometric correction is also considered in Exhaust Ventilation Design Software. In Exhaust Ventilation Design Software design process, efforts are focused on improving GUI (graphical user interface and use of programming standards in software design. Reliability of software has been evaluated and results show acceptable accuracy.

  19. Graphical programming of telerobotic tasks

    International Nuclear Information System (INIS)

    Small, D.E.; McDonald, M.J.

    1997-01-01

    With a goal of producing faster, safer, and cheaper technologies for nuclear waste cleanup, Sandia is actively developing and extending intelligent systems technologies. Graphical Programming is a key technology for robotic waste cleanup that Sandia is developing for this goal. This paper describes Sancho, Sandia most advanced Graphical Programming supervisory software. Sancho, now operational on several robot systems, incorporates all of Sandia's recent advances in supervisory control. Sancho, developed to rapidly apply Graphical Programming on a diverse set of robot systems, uses a general set of tools to implement task and operational behavior. Sancho can be rapidly reconfigured for new tasks and operations without modifying the supervisory code. Other innovations include task-based interfaces, event-based sequencing, and sophisticated GUI design. These innovations have resulted in robot control programs and approaches that are easier and safer to use than teleoperation, off-line programming, or full automation

  20. Designing automatic resupply systems.

    Science.gov (United States)

    Harding, M L

    1999-02-01

    This article outlines the process for designing and implementing autoresupply systems. The planning process includes determination of goals and appropriate participation. Different types of autoresupply mechanisms include kanban, breadman, consignment, systems contracts, and direct shipping from an MRP schedule.

  1. Development of a Computer-aided Learning System for Graphical Analysis of Continuous-Time Control Systems

    Directory of Open Access Journals (Sweden)

    J. F. Opadiji

    2010-06-01

    Full Text Available We present the development and deployment process of a computer-aided learning tool which serves as a training aid for undergraduate control engineering courses. We show the process of algorithm construction and implementation of the software which is also aimed at teaching software development at undergraduate level. The scope of this project is limited to graphical analysis of continuous-time control systems.

  2. C language program analysis system (CLAS) part 1: graphical user interface (GUI)

    International Nuclear Information System (INIS)

    Bhattacharjee, A.K.; Seby, A.; Sen, Gopa; Dhodapkar, S.D.

    1994-01-01

    CLAS (C Language Program Analysis System) is a reverse engineering tool intended for use in the verification and validation (V and V) phase of software programs developed in the ANSI C language. From the source code, CLAS generates data pertaining to two conceptual models of software programs viz., Entity-Relationship (E-R) model and Control Flow Graphs (CFG) model. Browsing tools within CLAS, make use of this data, to provide different graphical views of the project. Static analysis tools have been developed earlier for analysing assembly language programs. CLAS is a continuation of this work to provide automated support in analysis of ANSI C language programs. CLAS provides an integrated Graphical User Interface (GUI) based environment under which programs can be analysed into the above mentioned models and the analysed data can be viewed using the browsing tools. The GUI of CLAS is implemented using an OPEN LOOK compliant tool kit XVIEW on Sun SPARC IPC workstation running Sun OS 4.1.1 rev. B. This report describes the GUI of CLAS. CLAS is also expected to be useful in other contexts which may involve understanding architecture/structure of already developed C language programs. Such requirements can arise while carrying out activities like code modification, parallelising etc. (author). 5 refs., 13 figs., 1 appendix

  3. Real-time track-less Cherenkov ring fitting trigger system based on Graphics Processing Units

    Science.gov (United States)

    Ammendola, R.; Biagioni, A.; Chiozzi, S.; Cretaro, P.; Cotta Ramusino, A.; Di Lorenzo, S.; Fantechi, R.; Fiorini, M.; Frezza, O.; Gianoli, A.; Lamanna, G.; Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Neri, I.; Paolucci, P. S.; Pastorelli, E.; Piandani, R.; Piccini, M.; Pontisso, L.; Rossetti, D.; Simula, F.; Sozzi, M.; Vicini, P.

    2017-12-01

    The parallel computing power of commercial Graphics Processing Units (GPUs) is exploited to perform real-time ring fitting at the lowest trigger level using information coming from the Ring Imaging Cherenkov (RICH) detector of the NA62 experiment at CERN. To this purpose, direct GPU communication with a custom FPGA-based board has been used to reduce the data transmission latency. The GPU-based trigger system is currently integrated in the experimental setup of the RICH detector of the NA62 experiment, in order to reconstruct ring-shaped hit patterns. The ring-fitting algorithm running on GPU is fed with raw RICH data only, with no information coming from other detectors, and is able to provide more complex trigger primitives with respect to the simple photodetector hit multiplicity, resulting in a higher selection efficiency. The performance of the system for multi-ring Cherenkov online reconstruction obtained during the NA62 physics run is presented.

  4. HVAC systems design handbook

    CERN Document Server

    Haines, Roger W

    2010-01-01

    Thoroughly updated with the latest codes, technologies, and practices, this all-in-one resource provides details, calculations, and specifications for designing efficient and effective residential, commercial, and industrial HVAC systems. HVAC Systems Design Handbook, Fifth Edition, features new information on energy conservation and computer usage for design and control, as well as the most recent International Code Council (ICC) Mechanical Code requirements. Detailed illustrations, tables, and essential HVAC equations are also included. This comprehensive guide contains everything you need to design, operate, and maintain peak-performing HVAC systems.

  5. Human Systems Design Criteria

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1982-01-01

    This paper deals with the problem of designing more humanised computer systems. This problem can be formally described as the need for defining human design criteria, which — if used in the design process - will secure that the systems designed get the relevant qualities. That is not only...... the necessary functional qualities but also the needed human qualities. The author's main argument is, that the design process should be a dialectical synthesis of the two points of view: Man as a System Component, and System as Man's Environment. Based on a man's presentation of the state of the art a set...... of design criteria is suggested and their relevance discussed. The point is to focus on the operator rather than on the computer. The crucial question is not to program the computer to work on its own conditions, but to “program” the operator to function on human conditions....

  6. PC graphics generation and management tool for real-time applications

    Science.gov (United States)

    Truong, Long V.

    1992-01-01

    A graphics tool was designed and developed for easy generation and management of personal computer graphics. It also provides methods and 'run-time' software for many common artificial intelligence (AI) or expert system (ES) applications.

  7. Position and Orientation Tracking System graphical user interface. CRADA final report

    International Nuclear Information System (INIS)

    Barry, R.E.; Armstrong, G.A.; Burks, B.L.

    1997-01-01

    Under the Department of Energy's Robotics Technology Development Program (RTDP) Tank Waste Retrieval (TWR) program, a major effort is under way to develop technology for remediating the waste in underground storage tanks that contain radioactive and hazardous waste. A large part of the program's effort has gone towards development of remotely operable robotics equipment, including the Houdini Vehicle and the Position and Orientation Tracking System (POTS). Since planned operation of this equipment is to be completely remote, a significant effort is needed to ensure that operators have sufficient system information to operate the equipment efficiently and safely. ORNL developed POTS and RedZone Robotics, Inc. developed Houdini which can be operated together to provide both position and orientation descriptions of the Houdini vehicle, relative to a world reference frame, while operating inside an underground storage tank. The Houdini vehicle has been outfitted with an optical detection system that houses infrared detectors. The infrared detectors are part of the POTS tracking system. The sensors provide a set of timing pulses to the POTS control computer whenever a laser beam from one of the four POTS laser scanners strikes a detector. Using the pointing angle information from each POTS laser scanners, the POTS control computer is able to compute the pose of the Houdini vehicle at a rate of approximately 25 Hz. This information, along with the orientation of the Houdini's Schilling Titan II robot arm, is used to present the pose information to the operator in a 3-D graphical user interface using software that has been developed by this Cooperative Research and Development Agreement (CRADA). The graphical display presents the data to the operator in a format that is readily understood. The equipment operators are able to use the information in real-time to enhance the operator's ability to safely and efficiently control the remotely-operated vehicle

  8. Rectenna system design

    Science.gov (United States)

    Brown, W. C.; Dickinson, R. M.; Nalos, E. J.; Ott, J. H.

    1980-01-01

    The function of the rectenna in the solar power satellite system is described and the basic design choices based on the desired microwave field concentration and ground clearance requirements are given. One important area of concern, from the EMI point of view, harmonic reradiation and scattering from the rectenna is also designed. An optimization of a rectenna system design to minimize costs was performed. The rectenna cost breakdown for a 56 w installation is given as an example.

  9. Computer Graphic Design Using Auto-CAD and Plug Nozzle Research

    Science.gov (United States)

    Rogers, Rayna C.

    2004-01-01

    The purpose of creating computer generated images varies widely. They can be use for computational fluid dynamics (CFD), or as a blueprint for designing parts. The schematic that I will be working on the summer will be used to create nozzles that are a part of a larger system. At this phase in the project, the nozzles needed for the systems have been fabricated. One part of my mission is to create both three dimensional and two dimensional models on Auto-CAD 2002 of the nozzles. The research on plug nozzles will allow me to have a better understanding of how they assist in the thrust need for a missile to take off. NASA and the United States military are working together to develop a new design concept. On most missiles a convergent-divergent nozzle is used to create thrust. However, the two are looking into different concepts for the nozzle. The standard convergent-divergent nozzle forces a mixture of combustible fluids and air through a smaller area in comparison to where the combination was mixed. Once it passes through the smaller area known as A8 it comes out the end of the nozzle which is larger the first or area A9. This creates enough thrust for the mechanism whether it is an F-18 fighter jet or a missile. The A9 section of the convergent-divergent nozzle has a mechanism that controls how large A9 can be. This is needed because the pressure of the air coming out nozzle must be equal to that of the ambient pressure other wise there will be a loss of performance in the machine. The plug nozzle however does not need to have an A9 that can vary. When the air flow comes out it can automatically sense what the ambient pressure is and will adjust accordingly. The objective of this design is to create a plug nozzle that is not as complicated mechanically as it counterpart the convergent-divergent nozzle.

  10. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  11. Practical RF system design

    CERN Document Server

    Egan, William F

    2003-01-01

    he ultimate practical resource for today's RF system design professionals Radio frequency components and circuits form the backbone of today's mobile and satellite communications networks. Consequently, both practicing and aspiring industry professionals need to be able to solve ever more complex problems of RF design. Blending theoretical rigor with a wealth of practical expertise, Practical RF System Design addresses a variety of complex, real-world problems that system engineers are likely to encounter in today's burgeoning communications industry with solutions that are not easily available in the existing literature. The author, an expert in the field of RF module and system design, provides powerful techniques for analyzing real RF systems, with emphasis on some that are currently not well understood. Combining theoretical results and models with examples, he challenges readers to address such practical issues as: * How standing wave ratio affects system gain * How noise on a local oscillator will affec...

  12. Psychology of system design

    CERN Document Server

    Meister, D

    2014-01-01

    This is a book about systems, including: systems in which humans control machines; systems in which humans interact with humans and the machine component is relatively unimportant; systems which are heavily computerized and those that are not; and governmental, industrial, military and social systems. The book deals with both traditional systems like farming, fishing and the military, and with systems just now tentatively emerging, like the expert and the interactive computer system. The emphasis is on the system concept and its implications for analysis, design and evaluation of these many di

  13. Mathematics for computer graphics

    CERN Document Server

    Vince, John

    2006-01-01

    Helps you understand the mathematical ideas used in computer animation, virtual reality, CAD, and other areas of computer graphics. This work also helps you to rediscover the mathematical techniques required to solve problems and design computer programs for computer graphic applications

  14. Graphic Communications. Curriculum Guide.

    Science.gov (United States)

    North Dakota State Board for Vocational Education, Bismarck.

    This guide provides the basic foundation to develop a one-semester course based on the cluster concept, graphic communications. One of a set of six guides for an industrial arts curriculum at the junior high school level, it suggests exploratory experiences designed to (1) develop an awareness and understanding of the drafting and graphic arts…

  15. Connecting icons, logos and slogans in graphic trademarks

    OpenAIRE

    Ambrožič, Maja

    2016-01-01

    In the public eye the organization is always considered or fully represented by its corporate identity that includes the size of the organization, annual payments, organizational structure, organizational culture, systems owned by the organization, premises, organizational culture, organizational strategy, mission, vision, number of employees etc. Graphic designer when designing graphic trademark by connecting graphic elements (logo, slogan and icon) must take in to consideration all abovemen...

  16. The graphics-based human interface to the DISYS diagnostic/control guidance system at EBR-2

    International Nuclear Information System (INIS)

    Edwards, R.M.; Chavez, C.; Kamarthi, S.; Dharap, S.; Lindsay, R.W.; Staffon, J.

    1990-01-01

    An initial graphics based interface to the real-time DISYS diagnostic system has been developed using the multi-tasking capabilities of the UNIX operating system and X-Windows 11 Xlib graphics library. This system is interfaced to live plant data at the Experimental Breeder Reactor (EBR-2) for the Argon Cooling System of fuel handling operations and the steam plant. The interface includes an intelligent process schematic which highlights problematic components and sensors based on the results of the diagnostic computations. If further explanation of a faulted component is required, the user can call up a display of the diagnostic computations presented in a tree-like diagram. Numerical data on the process schematic and optional diagnostic tree are updated as new real-time data becomes available. The initial X-Windows 11 based interface will be further enhanced using VI Corporation DATAVIEWS graphical data base software. 5 refs., 6 figs

  17. GRAPHIC DESIGN OF THE VISUAL COMMUNICATION OF THE EXHIBITION OF THE VILAKAS COUNTY MUSEUM

    OpenAIRE

    Miezite, Santa; Apele, Diāna

    2018-01-01

    Communication is a conversation, communication, the way information is provided. The museum's exposure language must be aesthetic, informative, cognitive process and memory stimulation.The designer, who designs and offers museum–oriented and up–to–date design solutions, plays a major role in solving the issues. The designer, in collaboration with the museum's staff, should prepare materials and programs for the society that are in line with the museum's goals and objectives and which society ...

  18. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  19. Dynamic 3-D computer graphics for designing a diagnostic tool for patients with schizophrenia.

    Science.gov (United States)

    Farkas, Attila; Papathomas, Thomas V; Silverstein, Steven M; Kourtev, Hristiyan; Papayanopoulos, John F

    2016-11-01

    We introduce a novel procedure that uses dynamic 3-D computer graphics as a diagnostic tool for assessing disease severity in schizophrenia patients, based on their reduced influence of top-down cognitive processes in interpreting bottom-up sensory input. Our procedure uses the hollow-mask illusion, in which the concave side of the mask is misperceived as convex, because familiarity with convex faces dominates sensory cues signaling a concave mask. It is known that schizophrenia patients resist this illusion and their resistance increases with illness severity. Our method uses virtual masks rendered with two competing textures: (a) realistic features that enhance the illusion; (b) random-dot visual noise that reduces the illusion. We control the relative weights of the two textures to obtain psychometric functions for controls and patients and assess illness severity. The primary novelty is the use of a rotating mask that is easy to implement on a wide variety of portable devices and avoids the use of elaborate stereoscopic devices that have been used in the past. Thus our method, which can also be used to assess the efficacy of treatments, provides clinicians the advantage to bring the test to the patient's own environment, instead of having to bring patients to the clinic.

  20. Talking to Texts and Sketches: The Function of Written and Graphic Mediation in Engineering Design.

    Science.gov (United States)

    Lewis, Barbara

    2000-01-01

    Describes the author's research that explores the role of language, particularly texts, in the engineering design process. Notes that results of this case study support a new "mediated" model of engineering design as an inventional activity in which designers use talk, written language, and other symbolic representations as tools to think about…

  1. The Status of Graphical Presentation in Interior/Architectural Design Education

    Science.gov (United States)

    Gurel, Meltem O.; Basa, Inci

    2004-01-01

    This article argues that interior/architectural design education favours a dominance of final presentation over the design process in the studio environment, particularly in the evaluation of a project. It suggests that the appeal of design juries for pleasant drawings, which may shift the emphasis from the project itself to its representation,…

  2. Resilient computer system design

    CERN Document Server

    Castano, Victor

    2015-01-01

    This book presents a paradigm for designing new generation resilient and evolving computer systems, including their key concepts, elements of supportive theory, methods of analysis and synthesis of ICT with new properties of evolving functioning, as well as implementation schemes and their prototyping. The book explains why new ICT applications require a complete redesign of computer systems to address challenges of extreme reliability, high performance, and power efficiency. The authors present a comprehensive treatment for designing the next generation of computers, especially addressing safety-critical, autonomous, real time, military, banking, and wearable health care systems.   §  Describes design solutions for new computer system - evolving reconfigurable architecture (ERA) that is free from drawbacks inherent in current ICT and related engineering models §  Pursues simplicity, reliability, scalability principles of design implemented through redundancy and re-configurability; targeted for energy-,...

  3. The computer graphics metafile

    CERN Document Server

    Henderson, LR; Shepherd, B; Arnold, D B

    1990-01-01

    The Computer Graphics Metafile deals with the Computer Graphics Metafile (CGM) standard and covers topics ranging from the structure and contents of a metafile to CGM functionality, metafile elements, and real-world applications of CGM. Binary Encoding, Character Encoding, application profiles, and implementations are also discussed. This book is comprised of 18 chapters divided into five sections and begins with an overview of the CGM standard and how it can meet some of the requirements for storage of graphical data within a graphics system or application environment. The reader is then intr

  4. Design of the vacuum control system for DIII-D

    International Nuclear Information System (INIS)

    Campbell, G.L.; Callis, R.W.; Haskovec, J.S.; Heckman, E.J.; Moore, C.D.; Scoville, J.T.

    1986-01-01

    The vacuum control and instrumentation for the DIII-D upgrade was designed using a new large programmable controller with color graphic operator interfaces and intelligent distributed devices. Remote, optically isolated input and output is used as well as optical isolation for the operator and programming consoles. Gate valves between experimental equipment and the vacuum vessel are interlocked for machine safety by an intelligent interface based upon a commercially available microcontroller card. Complete automatic operation with capability for remote operator intervention was one goal of this design effort. The design of the system with emphasis on the graphics, optical isolation and microcontroller implementation will be discussed

  5. GUIdock-VNC: using a graphical desktop sharing system to provide a browser-based interface for containerized software.

    Science.gov (United States)

    Mittal, Varun; Hung, Ling-Hong; Keswani, Jayant; Kristiyanto, Daniel; Lee, Sung Bong; Yeung, Ka Yee

    2017-04-01

    Software container technology such as Docker can be used to package and distribute bioinformatics workflows consisting of multiple software implementations and dependencies. However, Docker is a command line-based tool, and many bioinformatics pipelines consist of components that require a graphical user interface. We present a container tool called GUIdock-VNC that uses a graphical desktop sharing system to provide a browser-based interface for containerized software. GUIdock-VNC uses the Virtual Network Computing protocol to render the graphics within most commonly used browsers. We also present a minimal image builder that can add our proposed graphical desktop sharing system to any Docker packages, with the end result that any Docker packages can be run using a graphical desktop within a browser. In addition, GUIdock-VNC uses the Oauth2 authentication protocols when deployed on the cloud. As a proof-of-concept, we demonstrated the utility of GUIdock-noVNC in gene network inference. We benchmarked our container implementation on various operating systems and showed that our solution creates minimal overhead. © The Authors 2017. Published by Oxford University Press.

  6. Remote Systems Design & Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  7. LISA system design highlights

    Energy Technology Data Exchange (ETDEWEB)

    Sallusti, M [European Space Agency, ESTEC, Keplerlaan 1, 2200 AG Noordwijk ZH (Netherlands); Gath, P; Weise, D; Berger, M; Schulte, H R, E-mail: marcello.sallusti@esa.in, E-mail: peter.gath@astrium.eads.ne, E-mail: dennis.weise@astrium.eads.ne, E-mail: marcel.berger@astrium.eads.ne, E-mail: Hans.Reiner.Schulte@astrium.eads.ne [Astrium GmbH Satellites, Claude-Dornier-Str., 88039 Friedrichshafen (Germany)

    2009-05-07

    A contract, started in January 2005, was awarded to a consortium of Astrium GmbH and Astrium Ltd for the LISA Mission Formulation. The scope of the contract was the development of a reference design for the mission architecture and for the mission elements (with particular focus on the payload) and a successive phase of derivation of requirements, to be concluded with a mission design review. The technical starting point was the output of the previous LISA study formalized in the Final Technical Report, issued in the year 2000. During the design phase, different architecture concepts were identified and traded off, including the LISA orbits, the measurement scheme and the opto-mechanical architecture. During the Mission Design Review (July 2008) the consolidated mission baseline design, and the specifications of the flight elements and of the payload subsystem and major components were presented. This paper gives a brief overview of the major design points of the latest design of the LISA system.

  8. LISA system design highlights

    International Nuclear Information System (INIS)

    Sallusti, M; Gath, P; Weise, D; Berger, M; Schulte, H R

    2009-01-01

    A contract, started in January 2005, was awarded to a consortium of Astrium GmbH and Astrium Ltd for the LISA Mission Formulation. The scope of the contract was the development of a reference design for the mission architecture and for the mission elements (with particular focus on the payload) and a successive phase of derivation of requirements, to be concluded with a mission design review. The technical starting point was the output of the previous LISA study formalized in the Final Technical Report, issued in the year 2000. During the design phase, different architecture concepts were identified and traded off, including the LISA orbits, the measurement scheme and the opto-mechanical architecture. During the Mission Design Review (July 2008) the consolidated mission baseline design, and the specifications of the flight elements and of the payload subsystem and major components were presented. This paper gives a brief overview of the major design points of the latest design of the LISA system.

  9. Dumping Low and High Resolution Graphics on the Apple IIe Microcomputer System.

    Science.gov (United States)

    Fletcher, Richard K., Jr.; Ruckman, Frank, Jr.

    This paper discusses and outlines procedures for obtaining a hard copy of the graphic output of a microcomputer or "dumping a graphic" using the Apple Dot Matrix Printer with the Apple Parallel Interface Card, and the Imagewriter Printer with the Apple Super Serial Interface Card. Hardware configurations and instructions for high…

  10. Graphical user interface for trace 3-D incorporating some expert system type features

    International Nuclear Information System (INIS)

    Gillespie, G.H.; Hill, B.W.

    1992-01-01

    A graphical user interface (GUI) has been developed for the beam transport program TRACE 3-D. The interface was developed on the Macintosh personal computer platform and emphasizes ease of initial problem setup and definition. Each of the sixteen types of transport elements (drifts, quadrupoles, etc.) available in TRACE 3-D, as well as the initial and final (for matching) beam emittance (Twiss) parameters, are represented by piece icons on a scrollable palette. The configuration of a beamline is set up visually by selecting and dragging (via mouse) the desired piece icons to a model window. Parameter values (drift lengths, quadrupole strengths, etc.) are entered into piece data windows for each element in the beam-line. Several expert system type rules are incorporated into the piece windows. The user can select any of several units for his input, including fixed units or dynamic scaled units. For example, any length parameter can be entered as millimeters, centimeters, meters, or fractions of βλ where β and λ are determined from the particle mass, initial beam energy and radiofrequency. All input parameters have built-in default values as well as lower and upper limits. The limits are soft (the user can input any value) but are used to alert the user visually when some of his input data may have impractical consequences. Examples of this include specifying a PMQ which requires an extremely high remnant field, or a RFQ cell with a very large Kilpatrick factor. Virtually all other input is set up graphically, including the selection of matching variables and coupling parameters. (author). 6 refs., 4 figs

  11. Wide-angle display developments by computer graphics

    Science.gov (United States)

    Fetter, William A.

    1989-01-01

    Computer graphics can now expand its new subset, wide-angle projection, to be as significant a generic capability as computer graphics itself. Some prior work in computer graphics is presented which leads to an attractive further subset of wide-angle projection, called hemispheric projection, to be a major communication media. Hemispheric film systems have long been present and such computer graphics systems are in use in simulators. This is the leading edge of capabilities which should ultimately be as ubiquitous as CRTs (cathode-ray tubes). These assertions are not from degrees in science or only from a degree in graphic design, but in a history of computer graphics innovations, laying groundwork by demonstration. The author believes that it is timely to look at several development strategies, since hemispheric projection is now at a point comparable to the early stages of computer graphics, requiring similar patterns of development again.

  12. Designing Deliberation Systems

    DEFF Research Database (Denmark)

    Rose, Jeremy; Sæbø, Øystein

    2010-01-01

    the potential to revitalize and transform citizen engagement in democracy.  Although the majority of web 2.0 systems enable these discourses to some extent, government institutions commission and manage specialized deliberation systems (information systems designed to support participative discourse) intended...... to promote citizen engagement.  The most common examples of these are political discussion forums.  Though usually considered trivial adaptations of well-known technologies, these types of deliberative systems are often unsuccessful, and present a distinct set of design and management challenges.......  In this article we analyze the issues involved in establishing political deliberation systems under four headings: stakeholder engagement, web platform design, service management, political process re-shaping and evaluation and improvement.  We review the existing literature and present a longitudinal case study...

  13. Structural Sketcher : representing and applying well-structured graphic representations in early design

    NARCIS (Netherlands)

    Pranovich, S.; Achten, H.H.; Vries, de B.; Wijk, van J.J.

    2005-01-01

    Computational drawing support has the potential to improve design support in the early phase. Much work in this area is devoted to input of design information, manipulation, and presentation. Based on a review of current work, we note that among other things, digital drawing tools should be close to

  14. Graphical programming: On-line robot simulation for telerobotic control

    International Nuclear Information System (INIS)

    McDonald, M.J.; Palmquist, R.D.

    1993-01-01

    Sandia has developed an advanced operational control system approach, caged Graphical Programming, to design and operate robotic waste cleanup and other hazardous duty robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. The Graphical Programming approach uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Progranuning Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control. This paper describes the Graphical Programming approach, several example control systems that use Graphical Programming, and key features necessary for implementing successful Graphical Programming systems

  15. Graphic Storytelling

    Science.gov (United States)

    Thompson, John

    2009-01-01

    Graphic storytelling is a medium that allows students to make and share stories, while developing their art communication skills. American comics today are more varied in genre, approach, and audience than ever before. When considering the impact of Japanese manga on the youth, graphic storytelling emerges as a powerful player in pop culture. In…

  16. Lunar Module Electrical Power System Design Considerations and Failure Modes

    Science.gov (United States)

    Interbartolo, Michael

    2009-01-01

    This slide presentation reviews the design and redesign considerations of the Apollo lunar module electrical power system. Included in the work are graphics showing the lunar module power system. It describes the in-flight failures, and the lessons learned from these failures.

  17. A graphics processing unit accelerated motion correction algorithm and modular system for real-time fMRI.

    Science.gov (United States)

    Scheinost, Dustin; Hampson, Michelle; Qiu, Maolin; Bhawnani, Jitendra; Constable, R Todd; Papademetris, Xenophon

    2013-07-01

    Real-time functional magnetic resonance imaging (rt-fMRI) has recently gained interest as a possible means to facilitate the learning of certain behaviors. However, rt-fMRI is limited by processing speed and available software, and continued development is needed for rt-fMRI to progress further and become feasible for clinical use. In this work, we present an open-source rt-fMRI system for biofeedback powered by a novel Graphics Processing Unit (GPU) accelerated motion correction strategy as part of the BioImage Suite project ( www.bioimagesuite.org ). Our system contributes to the development of rt-fMRI by presenting a motion correction algorithm that provides an estimate of motion with essentially no processing delay as well as a modular rt-fMRI system design. Using empirical data from rt-fMRI scans, we assessed the quality of motion correction in this new system. The present algorithm performed comparably to standard (non real-time) offline methods and outperformed other real-time methods based on zero order interpolation of motion parameters. The modular approach to the rt-fMRI system allows the system to be flexible to the experiment and feedback design, a valuable feature for many applications. We illustrate the flexibility of the system by describing several of our ongoing studies. Our hope is that continuing development of open-source rt-fMRI algorithms and software will make this new technology more accessible and adaptable, and will thereby accelerate its application in the clinical and cognitive neurosciences.

  18. The variation management framework (VMF): A unifying graphical representation of robust design

    DEFF Research Database (Denmark)

    Howard, Thomas J.; Eifler, Tobias; Pedersen, Søren Nygaard

    2017-01-01

    In this article a framework for robust design and variation management is proposed by combining central models to Robust Design, namely, the Quality Loss Function, the Transfer Function, and the Domains of Axiomatic Design. The Variation Management Framework (VMF) shows how variation can be mapped...... from production variation right through to the quality loss perceived by the customer for a single characteristic chain. Seven levers which can be activated to increase product quality are described and positioned on the VMF and variation metrics are proposed....

  19. Computerized three-dimensional treatment planning system utilizing interactive colour graphics

    Energy Technology Data Exchange (ETDEWEB)

    McShan, D L; Silverman, A; Lanza, D M; Reinstein, L E; Glicksman, A S [Rhode Island Hospital (US). Dept. of Radiation Oncology

    1979-06-01

    A new computerized radiation treatment planning system has been developed to aid in three-dimensional treatment planning. Using interactive colour graphics in conjunction with a PDP 11/45 computer, the system can take multiple transverse contours and construct a perspective display of the treatment region showing organ surfaces as well as cross-sectional contours. With interactively selected orientations, the display allows easy perception of the relative positioning of the treatment volume and the neighbouring anatomy. For external beam treatment planning, interactive computer simulation is used to select diaphragm sizes which best conform to the target area while avoiding sensitive structures. Dose calculations for the selected beams are carried out on multiple transverse planes. The calculational planes and surfaces are displayed in perspective with radiation dosage displayed in an interactively manipulated colour display. Altogether the system provides an easy assessment of the volume to be irradiated, interactive selection of optimal arrangements of treatment fields and a means of visualizing and evaluating the resulting dose distributions.

  20. Graphic system for the analysis of representation of a complex three-dimensional configuration for radiation shield calculation

    International Nuclear Information System (INIS)

    Berezhkov, A.B.; Gordeeva, E.K.; Mazanov, V.L.; Solov'ev, V.Yu.; Ryabov, A.V.; Khokhlov, V.F.; Shejno, I.N.

    1987-01-01

    Programs for obtaining phantom images when calculating the radiation shield structure for nuclear-engineering plants, using computer graphics, are developed. Programs are designed to accompany calculational investigations using the SUPER2/RRI3-PICSCH program and ZAMOK-TOMOGRAF program comutering complexes. Design geometry techniques, allowing to present three-dimensional object in the form of two-dimensional perspective projection to the screen plane, are realized in the programs

  1. Three-dimensional computer graphics-based ankle morphometry with computerized tomography for total ankle replacement design and positioning.

    Science.gov (United States)

    Kuo, Chien-Chung; Lu, Hsuan-Lun; Leardini, Alberto; Lu, Tung-Wu; Kuo, Mei-Ying; Hsu, Horng-Chaung

    2014-05-01

    Morphometry of the bones of the ankle joint is important for the design of joint replacements and their surgical implantations. However, very little three-dimensional (3D) data are available and not a single study has addressed the Chinese population. Fifty-eight fresh frozen Chinese cadaveric ankle specimens, 26 females, and 32 males, were CT-scanned in the neutral position and their 3D computer graphics-based models were reconstructed. The 3D morphology of the distal tibia/fibula segment and the full talus was analyzed by measuring 31 parameters, defining the relevant dimensions, areas, and volumes from the models. The measurements were compared statistically between sexes and with previously reported data from Caucasian subjects. The results showed that, within a general similarity of ankle morphology between the current Chinese and previous Caucasian subjects groups, there were significant differences in 9 out of the 31 parameters analyzed. From a quantitative comparison with available prostheses designed for the Caucasian population, few of these designs have both tibial and talar components suitable in dimension for the Chinese population. The current data will be helpful for the sizing, design, and surgical positioning of ankle replacements and for surgical instruments, especially for the Chinese population. Copyright © 2013 Wiley Periodicals, Inc.

  2. Point-Cloud Compression for Vehicle-Based Mobile Mapping Systems Using Portable Network Graphics

    Science.gov (United States)

    Kohira, K.; Masuda, H.

    2017-09-01

    A mobile mapping system is effective for capturing dense point-clouds of roads and roadside objects Point-clouds of urban areas, residential areas, and arterial roads are useful for maintenance of infrastructure, map creation, and automatic driving. However, the data size of point-clouds measured in large areas is enormously large. A large storage capacity is required to store such point-clouds, and heavy loads will be taken on network if point-clouds are transferred through the network. Therefore, it is desirable to reduce data sizes of point-clouds without deterioration of quality. In this research, we propose a novel point-cloud compression method for vehicle-based mobile mapping systems. In our compression method, point-clouds are mapped onto 2D pixels using GPS time and the parameters of the laser scanner. Then, the images are encoded in the Portable Networking Graphics (PNG) format and compressed using the PNG algorithm. In our experiments, our method could efficiently compress point-clouds without deteriorating the quality.

  3. Cultural Heritage: An example of graphical documentation with automated photogrammetric systems

    Science.gov (United States)

    Giuliano, M. G.

    2014-06-01

    In the field of Cultural Heritage, the use of automated photogrammetric systems, based on Structure from Motion techniques (SfM), is widely used, in particular for the study and for the documentation of the ancient ruins. This work has been carried out during the PhD cycle that was produced the "Carta Archeologica del territorio intorno al monte Massico". The study suggests the archeological documentation of the mausoleum "Torre del Ballerino" placed in the south-west area of Falciano del Massico, along the Via Appia. The graphic documentation has been achieved by using photogrammetric system (Image Based Modeling) and by the classical survey with total station, Nikon Nivo C. The data acquisition was carried out through digital camera Canon EOS 5D Mark II with Canon EF 17-40 mm f/4L USM @ 20 mm with images snapped in RAW and corrected in Adobe Lightroom. During the data processing, the camera calibration and orientation was carried out by the software Agisoft Photoscans and the final result has allowed to achieve a scaled 3D model of the monument, imported in software MeshLab for the different view. Three orthophotos in jpg format were extracted by the model, and then were imported in AutoCAD obtaining façade's surveys.

  4. POINT-CLOUD COMPRESSION FOR VEHICLE-BASED MOBILE MAPPING SYSTEMS USING PORTABLE NETWORK GRAPHICS

    Directory of Open Access Journals (Sweden)

    K. Kohira

    2017-09-01

    Full Text Available A mobile mapping system is effective for capturing dense point-clouds of roads and roadside objects.Point-clouds of urban areas, residential areas, and arterial roads are useful for maintenance of infrastructure, map creation, and automatic driving. However, the data size of point-clouds measured in large areas is enormously large. A large storage capacity is required to store such point-clouds, and heavy loads will be taken on network if point-clouds are transferred through the network. Therefore, it is desirable to reduce data sizes of point-clouds without deterioration of quality. In this research, we propose a novel point-cloud compression method for vehicle-based mobile mapping systems. In our compression method, point-clouds are mapped onto 2D pixels using GPS time and the parameters of the laser scanner. Then, the images are encoded in the Portable Networking Graphics (PNG format and compressed using the PNG algorithm. In our experiments, our method could efficiently compress point-clouds without deteriorating the quality.

  5. Diagrams: A Visual Survey of Graphs, Maps, Charts and Diagrams for the Graphic Designer.

    Science.gov (United States)

    Lockwood, Arthur

    Since the ultimate success of any diagram rests in its clarity, it is important that the designer select a method of presentation which will achieve this aim. He should be aware of the various ways in which statistics can be shown diagrammatically, how information can be incorporated in maps, and how events can be plotted in chart or graph form.…

  6. Development of Artistic Perception in Students of Graphic Design: A Preliminary Report.

    Science.gov (United States)

    Hanson, Glenn

    This study is an attempt to determine what level of artistic perception or art taste is brought into the classroom by students in schools of journalism and whether it can be demonstrated that design instruction can raise the level of artistic perception among journalism and advertising students. It was hypothesized that women would score higher in…

  7. Application Design Of Interactive Multimedia Development Based Motion Graphic On Making Fashion Design Learning In Digital Format

    OpenAIRE

    Winwin Wiana

    2017-01-01

    This study is a research and development aimed at developing multimedia interactive learning based animation as an effort to improve student learning motivation in learning Fashion Design Technology apart from this study also aims to design a learning program courses Fashion Design Technology with a focus on optimizing the use of interactive media in learning process. From this study showed 1 A preliminary study found that the problems faced by students when studying Fashion Design Technology...

  8. Conventional RF system design

    International Nuclear Information System (INIS)

    Puglisi, M.

    1994-01-01

    The design of a conventional RF system is always complex and must fit the needs of the particular machine for which it is planned. It follows that many different design criteria should be considered and analyzed, thus exceeding the narrow limits of a lecture. For this reason only the fundamental components of an RF system, including the generators, are considered in this short seminar. The most common formulas are simply presented in the text, while their derivations are shown in the appendices to facilitate, if desired, a more advanced level of understanding. (orig.)

  9. An Enhanced Graphical User Interface for Analyzing the Vulnerability of Electrical Power Systems to Terrorist Attacks

    National Research Council Canada - National Science Library

    Stathakos, Dimitrios

    2003-01-01

    ...) Conforming to Windows standards, the new OD GUI incorporates advanced graphical features, which help the user visualize the model and understand the consequences of interdiction The new ODs also...

  10. Indigenous Design for Automatic Testing of Tensile Strength Using Graphical User Interface

    OpenAIRE

    Ali Rafay; Junejo Faraz; Imtiaz Rafey; Shamsi Usama Sultan

    2016-01-01

    Tensile Testing is a fundamental material test to measure the tenacity and tensile strength. Tensile strength means ability to take tensile stress. This Universal Testing Machine is designed using Dual Cylinder Technique in order to comply with the maximun load (tensile force) with the reduction of minimum physical effort and minimized losses.It is to provide material testing opportunity to the students of different institutions, locally and globally, at lowest price; so that they can have a ...

  11. Design of a Graphical User Interface for Virtual Reality with Oculus Rift

    OpenAIRE

    Silverhav, Robin

    2015-01-01

    Virtual reality is a concept that has existed for some time but the recent advances in the performance of commercial computers has led the development of different commercial head mounted displays, for example the Oculus Rift. With this growing interest in virtual reality, it is important to evaluate existing techniques used when designing user interfaces. In addition, it is also important to develop new techniques to be able to give the user the best experience when using virtual reality app...

  12. Distributed System Design Checklist

    Science.gov (United States)

    Hall, Brendan; Driscoll, Kevin

    2014-01-01

    This report describes a design checklist targeted to fault-tolerant distributed electronic systems. Many of the questions and discussions in this checklist may be generally applicable to the development of any safety-critical system. However, the primary focus of this report covers the issues relating to distributed electronic system design. The questions that comprise this design checklist were created with the intent to stimulate system designers' thought processes in a way that hopefully helps them to establish a broader perspective from which they can assess the system's dependability and fault-tolerance mechanisms. While best effort was expended to make this checklist as comprehensive as possible, it is not (and cannot be) complete. Instead, we expect that this list of questions and the associated rationale for the questions will continue to evolve as lessons are learned and further knowledge is established. In this regard, it is our intent to post the questions of this checklist on a suitable public web-forum, such as the NASA DASHLink AFCS repository. From there, we hope that it can be updated, extended, and maintained after our initial research has been completed.

  13. Code Maintenance and Design for a Visual Programming Language Graphical User Interface

    National Research Council Canada - National Science Library

    Pierson, Graham

    2004-01-01

    This work adds new functionality to an existing visual programming environment. It applies software maintenance techniques for use with the Java Language in a Microsoft Windows operating system environment...

  14. Graphics gems

    CERN Document Server

    Glassner, Andrew S

    1993-01-01

    ""The GRAPHICS GEMS Series"" was started in 1990 by Andrew Glassner. The vision and purpose of the Series was - and still is - to provide tips, techniques, and algorithms for graphics programmers. All of the gems are written by programmers who work in the field and are motivated by a common desire to share interesting ideas and tools with their colleagues. Each volume provides a new set of innovative solutions to a variety of programming problems.

  15. Graphic notation

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    1992-01-01

    Texbook to be used along with training the practise of graphic notation. Describes method; exercises; bibliography; collection of examples. If you can read Danish, please refer to that edition which is by far much more updated.......Texbook to be used along with training the practise of graphic notation. Describes method; exercises; bibliography; collection of examples. If you can read Danish, please refer to that edition which is by far much more updated....

  16. Safeguards system design methodology

    International Nuclear Information System (INIS)

    Cravens, M.N.; Winblad, A.E.

    1977-01-01

    Sandia Laboratories is developing methods for the design of physical protection systems to safeguard special nuclear material and vital equipment at fixed sites. One method is outlined and illustrated with simplified examples drawn from current programs. The use of an adversary sequence diagram as an analysis tool is discussed

  17. GRAPHIC DESIGN INNOVATION AS BRAND IDENTITY FOR “MAHLZEIT N’DAS BROT” BREAD PACKAGING

    Directory of Open Access Journals (Sweden)

    Zulkarnain Zulkarnain

    2015-10-01

    Full Text Available Besides being useful for protecting food, packaging design also serves as a media campaign. So hopefully, Mahlzeit Bread n 'Das Brot can compete with other bakers and even can be a pioneer as an authentic German bread maker in Indonesia. This research was conducted by collecting information from the client (Mahlzeit n 'Das Brot owner. This information was used to obtain a verbal brand identity, then translated visually. The use of illustrations also becomes the most important visual images to present the image of Germany Elegant Vintage and privilege in explaining the products of Mahlzeit n 'Das Brot. The colors used are natural colors and traditionally the colors brown and green to indicate an authentic image of Mahlzeit n 'Das Brot.

  18. Web-based Core Design System Development

    International Nuclear Information System (INIS)

    Moon, So Young; Kim, Hyung Jin; Yang, Sung Tae; Hong, Sun Kwan

    2011-01-01

    The selection of a loading pattern is one of core design processes in the operation of a nuclear power plant. A potential new loading pattern is identified by selecting fuels that to not exceed the major limiting factors of the design and that satisfy the core design conditions for employing fuel data from the existing loading pattern of the current operating cycle. The selection of a loading pattern is also related to the cycle plan of an operating nuclear power plant and must meet safety and economic requirements. In selecting an appropriate loading pattern, all aspects, such as input creation, code runs and result processes are processed as text forms manually by a designer, all of which may be subject to human error, such as syntax or running errors. Time-consuming results analysis and decision-making processes are the most significant inefficiencies to avoid. A web-based nuclear plant core design system was developed here to remedy the shortcomings of an existing core design system. The proposed system adopts the general methodology of OPR1000 (Korea Standard Nuclear Power Plants) and Westinghouse-type plants. Additionally, it offers a GUI (Graphic User Interface)-based core design environment with a user-friendly interface for operators. It reduces human errors related to design model creation, computation, final reload core model selection, final output confirmation, and result data validation and verification. Most significantly, it reduces the core design time by more than 75% compared to its predecessor

  19. Graphical presentation of participants' results

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The results obtained by 19 participating dosimetry systems are presented in this section. Section 3 of the preceding report, ''Evaluation of the Results of the First IAEA Coordinated Research Program on Intercomparison for Individual Monitoring'', explains the format and conventions used for the graphical presentation. The system number appearing in the upper left hand corner of each page can be used to correlate the dosimeter design information found in Table 2 of the preceding report with the results. However, care should be used in drawing inferences from this correlation, since system performance depends on a number of factors other than detector selection and design characteristics. (orig.)

  20. BWID System Design Study

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Rudin, M.J.; Morrison, J.L.; Richardson, J.G.

    1991-01-01

    The mission of the Buried Waste Integrated Demonstration (BWID) System Design Study is to identify and evaluate technology process options for the cradle-to-grave remediation of Transuranic (TRU)-Contaminated Waste Pits and Trenches buried at the Idaho National Engineering Laboratory (INEL). Emphasis is placed upon evaluating system configuration options and associated functional and operational requirements for retrieving and treating the buried wastes. A Performance-Based Technology Selection Filter was developed to evaluate the identified remediation systems and their enabling technologies based upon system requirements and quantification of technical Comprehensive Environmental Response, Compensation, and Liability (CERCLA) balancing criteria. Remediation systems will also be evaluated with respect to regulatory and institutional acceptance and cost-effectiveness

  1. Computer-Aided dispatching system design specification

    International Nuclear Information System (INIS)

    Briggs, M.G.

    1996-01-01

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This system is defined as a Commercial-Off the-Shelf computer dispatching system providing both text and graphical display information while interfacing with the diverse reporting system within the Hanford Facility. This system also provided expansion capabilities to integrate Hanford Fire and the Occurrence Notification Center and provides back-up capabilities for the Plutonium Processing Facility

  2. Graphical symbol recognition

    OpenAIRE

    K.C. , Santosh; Wendling , Laurent

    2015-01-01

    International audience; The chapter focuses on one of the key issues in document image processing i.e., graphical symbol recognition. Graphical symbol recognition is a sub-field of a larger research domain: pattern recognition. The chapter covers several approaches (i.e., statistical, structural and syntactic) and specially designed symbol recognition techniques inspired by real-world industrial problems. It, in general, contains research problems, state-of-the-art methods that convey basic s...

  3. Education System Using Interactive 3D Computer Graphics (3D-CG) Animation and Scenario Language for Teaching Materials

    Science.gov (United States)

    Matsuda, Hiroshi; Shindo, Yoshiaki

    2006-01-01

    The 3D computer graphics (3D-CG) animation using a virtual actor's speaking is very effective as an educational medium. But it takes a long time to produce a 3D-CG animation. To reduce the cost of producing 3D-CG educational contents and improve the capability of the education system, we have developed a new education system using Virtual Actor.…

  4. Application Design Of Interactive Multimedia Development Based Motion Graphic On Making Fashion Design Learning In Digital Format

    Directory of Open Access Journals (Sweden)

    Winwin Wiana

    2017-05-01

    Full Text Available This study is a research and development aimed at developing multimedia interactive learning based animation as an effort to improve student learning motivation in learning Fashion Design Technology apart from this study also aims to design a learning program courses Fashion Design Technology with a focus on optimizing the use of interactive media in learning process. From this study showed 1 A preliminary study found that the problems faced by students when studying Fashion Design Technology is the student is not optimal when learning designing clothes based computer technology both in terms of learning content learning mechanisms that still uses a linear media and limitations of highly structured learning time. 2 Animation multimedia has the following characteristics a media of learning is convergent interactive self-contained in the sense of giving convenience to users without the guidance of others as multimedia applications can present the material to see more interesting and informative. 3 Design of multimedia learning software developed include the creation of flowcharts storyboards and drafting manuscript of interactive multimedia based animation. 4 Based on the results of validation by multimedia experts obtained an average percentage of 85.55 viability of the material experts obtained an average percentage of 90.84 viability and by students as users gained an average percentage of 96.38 eligibility so it can be said that the standard of the feasibility of interactive multimedia based animation developed is included in the category of Very High or Very Good. Furthermore experts agree that the development of interactive multimedia based animation on learning Fashion Design Technology can be used with some aspects that need to be improved to obtain higher levels of feasibility more optimal.

  5. Design of combi systems

    DEFF Research Database (Denmark)

    Andersen, Elsa; Shah, Louise Jivan; Furbo, Simon

    2001-01-01

    system based on a tank in tank heat storage are investigated experimentally in a laboratory test facility. One of the units is based on a mantle tank the other is based on a tank with a built-in heat exchanger spiral. The thermal performances of the systems in the laboratory test facility are measured...... with constant daily hot water consumption, consumption patterns and space heating demand for all days, and the results are used to validate TrnSys models. Based on simulation models of the combi systems, the thermal behavior is simulated and the thermal performance and the solar fraction of the systems...... simulation models where a number of different design-, control- and consumption parameters are varied....

  6. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  7. Graphical representation of objects' states for the PF linac control system

    International Nuclear Information System (INIS)

    Mejuev, I.; Abe, I.; Nakahara, K.

    1995-01-01

    This paper describes our approach for creating of a graphical representation of the states of accelerator objects. For every object which needs to display its state dynamics we create a chart element. Any changes in the object state are immediately represented on the chart of this object. We use the objects dependencies facility supplied by Smalltalk to keep track of the objects' states changes. This allows us to remove any graphics related features from the Object Model of the accelerator. Thus, the Object Model can be developed separately and reused in a number of applications. (author)

  8. Graphic Ecologies

    Directory of Open Access Journals (Sweden)

    Brook Weld Muller

    2014-12-01

    Full Text Available This essay describes strategic approaches to graphic representation associated with critical environmental engagement and that build from the idea of works of architecture as stitches in the ecological fabric of the city. It focuses on the building up of partial or fragmented graphics in order to describe inclusive, open-ended possibilities for making architecture that marry rich experience and responsive performance. An aphoristic approach to crafting drawings involves complex layering, conscious absence and the embracing of tension. A self-critical attitude toward the generation of imagery characterized by the notion of ‘loose precision’ may lead to more transformative and environmentally responsive architectures.

  9. Graphics gems

    CERN Document Server

    Heckbert, Paul S

    1994-01-01

    Graphics Gems IV contains practical techniques for 2D and 3D modeling, animation, rendering, and image processing. The book presents articles on polygons and polyhedral; a mix of formulas, optimized algorithms, and tutorial information on the geometry of 2D, 3D, and n-D space; transformations; and parametric curves and surfaces. The text also includes articles on ray tracing; shading 3D models; and frame buffer techniques. Articles on image processing; algorithms for graphical layout; basic interpolation methods; and subroutine libraries for vector and matrix algebra are also demonstrated. Com

  10. Identifying the Gaps of Fourth Year Degree Pre-Service Teachers' Pedagogical Content Knowledge in Teaching Engineering Graphics and Design

    Science.gov (United States)

    Khoza, Samuel Dumazi

    2017-01-01

    Engineering Graphics and Design is a technological subject which is offered in the Bachelor of Education degree from third to fourth year of the degree course. Fourth year pre-service teachers find EGD difficult to teach because of various reasons. Therefore the aim of the paper was to investigate fourth year pre-service teachers' pedagogical…

  11. Framework for computer-aided systems design

    International Nuclear Information System (INIS)

    Esselman, W.H.

    1992-01-01

    Advanced computer technology, analytical methods, graphics capabilities, and expert systems contribute to significant changes in the design process. Continued progress is expected. Achieving the ultimate benefits of these computer-based design tools depends on successful research and development on a number of key issues. A fundamental understanding of the design process is a prerequisite to developing these computer-based tools. In this paper a hierarchical systems design approach is described, and methods by which computers can assist the designer are examined. A framework is presented for developing computer-based design tools for power plant design. These tools include expert experience bases, tutorials, aids in decision making, and tools to develop the requirements, constraints, and interactions among subsystems and components. Early consideration of the functional tasks is encouraged. Methods of acquiring an expert's experience base is a fundamental research problem. Computer-based guidance should be provided in a manner that supports the creativity, heuristic approaches, decision making, and meticulousness of a good designer

  12. MathModelica - An Extensible Modeling and Simulation Environment with Integrated Graphics and Literate Programming

    OpenAIRE

    Fritzson, Peter; Gunnarsson, Johan; Jirstrand, Mats

    2002-01-01

    MathModelica is an integrated interactive development environment for advanced system modeling and simulation. The environment integrates Modelica-based modeling and simulation with graphic design, advanced scripting facilities, integration of program code, test cases, graphics, documentation, mathematical type setting, and symbolic formula manipulation provided via Mathematica. The user interface consists of a graphical Model Editor and Notebooks. The Model Editor is a graphical user interfa...

  13. Re-evaluating Science and Technology trough the lens of Arts and Graphic Design. A case study in La Spezia.

    Science.gov (United States)

    Locritani, Marina; Stroobant, Mascha; Talamoni, Roberta; Merlino, Silvia; Guccinelli, Giacomo; Benvenuti, Lucrezia; Zatta, Consuelo; Stricker, Federica; Zappa, Franco; Sgherri, Matteo

    2016-04-01

    The Human society is getting more and more involved with scientific and environmental issues both in terms of consciousness of good practices or participation in legislative decision-making processes. A common effort to preserve our planet is asked every day, for example through recycling practices, reduction of pollutant emission, use of alternative energies and awareness of risks natural and human-induced hazards. In addition, public opinion is often involved for issues of scientific interest (e.g. genetically modified organisms GMO). Unfortunately, the Eurobarometer (Eurobarometer Special 419 Report, Public perceptions of Science, Research and Innovation, 2014) indicates, especially for the Italian population, a low interest in science and therefore a lack of confidence in the potential of the research. It is hence important for people to be informed of the progress made by science and the importance of the researchers' role. Education, awareness and dissemination of scientific results and issues must be made through simple and appealing channels that must reach all levels of society and age groups: from children to older people. A common and comprehensible language for everyone can be found in Graphic Arts. For this reasons, the working group for science dissemination of La Spezia has increased, in recent years, close relationship with some artists (especially graphic designers). The collaboration between two different worlds (art and science) has allowed us to see an unusual approach and to translate concepts developed in images which everyone can understand also under an emotional point of view. Different techniques and tools based on the target to be reached have been employed. 1. Conferences. Gender differences issues in science professions and more generally in society has been addressed through interactive conferences and round tables during the European Researchers' Night 2015 and other occasions for general public. Arguments and questions were described

  14. Graphic notation

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2010-01-01

    Graphic notation is taught to music therapy students at Aalborg University in both simple and elaborate forms. This is a method of depicting music visually, and notations may serve as memory aids, as aids for analysis and reflection, and for communication purposes such as supervision or within...

  15. A graphical method for reducing and relating models in systems biology.

    Science.gov (United States)

    Gay, Steven; Soliman, Sylvain; Fages, François

    2010-09-15

    In Systems Biology, an increasing collection of models of various biological processes is currently developed and made available in publicly accessible repositories, such as biomodels.net for instance, through common exchange formats such as SBML. To date, however, there is no general method to relate different models to each other by abstraction or reduction relationships, and this task is left to the modeler for re-using and coupling models. In mathematical biology, model reduction techniques have been studied for a long time, mainly in the case where a model exhibits different time scales, or different spatial phases, which can be analyzed separately. These techniques are however far too restrictive to be applied on a large scale in systems biology, and do not take into account abstractions other than time or phase decompositions. Our purpose here is to propose a general computational method for relating models together, by considering primarily the structure of the interactions and abstracting from their dynamics in a first step. We present a graph-theoretic formalism with node merge and delete operations, in which model reductions can be studied as graph matching problems. From this setting, we derive an algorithm for deciding whether there exists a reduction from one model to another, and evaluate it on the computation of the reduction relations between all SBML models of the biomodels.net repository. In particular, in the case of the numerous models of MAPK signalling, and of the circadian clock, biologically meaningful mappings between models of each class are automatically inferred from the structure of the interactions. We conclude on the generality of our graphical method, on its limits with respect to the representation of the structure of the interactions in SBML, and on some perspectives for dealing with the dynamics. The algorithms described in this article are implemented in the open-source software modeling platform BIOCHAM available at http

  16. The effectiveness of graphic representation techniques used by industrial designers for the conceptual presentation of new products

    Directory of Open Access Journals (Sweden)

    Francisco Felip Miralles

    2017-09-01

    This work aims to demonstrate the importance of graphic expression used as a tool for presenting ideas about new products, and evaluate the effectiveness of several graphic techniques in improving the client's understanding of the product, taking into account the conceptual clarity, the representation of the mode of use, the relationship with the user and the contextualization of the product in its habitat or use environment.

  17. Logic Programs as a Specification and Description Tool in the Design Process of an Intelligent Tutoring System

    OpenAIRE

    Möbus, Claus

    1987-01-01

    We propose the use of logic programs when designing intelligent tutoring systems. With their help we specified the small-step semantics of the learning curriculum, designed the graphical user interface, derived instructions and modelled students' knowledge.

  18. THE DESIGNING OF ELECTRONIC TEACHING-METHODS COMPLEX «GRAPHICS» FOR REALIZATION OF COMPUTER-BASED LEARNING OF ENGINEERING-GRAPHIC DISCIPLINES

    Directory of Open Access Journals (Sweden)

    Іван Нищак

    2015-12-01

    Full Text Available The article contains Theoretical Foundations of designing of author’s electronic educational-methodical complex (EEMC «Graphics», intended to implement the engineering-graphic preparation of future teachers of technology in terms of computer-based learning. The process of designing of electronic educational-methodical complex “Graphics” includes the following successive stages: 1 identification of didactic goals and objectives; 2the designing of patterns of EEMC; 3 the selection of contents and systematization of educational material; 4 the program-technical implementation of EEMC; 5 interface design; 6 expert assessment of quality of EEMC; 7 testing of EEMC; 8 adjusting the software; 9 the development of guidelines and instructions for the use of EEMC.

  19. HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 4: HARP Output (HARPO) graphics display user's guide

    Science.gov (United States)

    Sproles, Darrell W.; Bavuso, Salvatore J.

    1994-01-01

    The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical postprocessor program HARPO (HARP Output). HARPO reads ASCII files generated by HARP. It provides an interactive plotting capability that can be used to display alternate model data for trade-off analyses. File data can also be imported to other commercial software programs.

  20. Airport Information Retrieval System (AIRS) System Design

    Science.gov (United States)

    1974-07-01

    This report presents the system design for a prototype air traffic flow control automation system developed for the FAA's Systems Command Center. The design was directed toward the immediate automation of airport data for use in traffic load predicti...

  1. AutoAssemblyD: a graphical user interface system for several genome assemblers.

    Science.gov (United States)

    Veras, Adonney Allan de Oliveira; de Sá, Pablo Henrique Caracciolo Gomes; Azevedo, Vasco; Silva, Artur; Ramos, Rommel Thiago Jucá

    2013-01-01

    Next-generation sequencing technologies have increased the amount of biological data generated. Thus, bioinformatics has become important because new methods and algorithms are necessary to manipulate and process such data. However, certain challenges have emerged, such as genome assembly using short reads and high-throughput platforms. In this context, several algorithms have been developed, such as Velvet, Abyss, Euler-SR, Mira, Edna, Maq, SHRiMP, Newbler, ALLPATHS, Bowtie and BWA. However, most such assemblers do not have a graphical interface, which makes their use difficult for users without computing experience given the complexity of the assembler syntax. Thus, to make the operation of such assemblers accessible to users without a computing background, we developed AutoAssemblyD, which is a graphical tool for genome assembly submission and remote management by multiple assemblers through XML templates. AssemblyD is freely available at https://sourceforge.net/projects/autoassemblyd. It requires Sun jdk 6 or higher.

  2. Development the interface system of master-slave manipulator and external input device on the graphic simulator

    International Nuclear Information System (INIS)

    Song, T. J.; Lee, J. Y.; Kim, S. H.; Yoon, J. S.

    2002-01-01

    The master-slave manipulator is the generally used as remote handling device in the hot cell, in which the high level radioactive materials such as spent fuels are handled. To analyze the motion of remote handling device and to simulate the remote handling operation task in the hot cell, the 3D graphic simulator which has been installed the master-slave manipulator is established. Also the interface program of external input device with 6 DOF(degree of Freedom) is developed and connected to graphic simulator with LLTI(Low Level Tele-operation Interface) which provides a uniquely optimized, high speed, bidirectional communication interface to one or more of system and processes

  3. A Framework for Systemic Design

    Directory of Open Access Journals (Sweden)

    Alex Ryan

    2014-12-01

    Full Text Available As designers move upstream from traditional product and service design to engage with challenges characterised by complexity, uniqueness, value conflict, and ambiguity over objectives, they have increasingly integrated systems approaches into their practice. This synthesis of systems thinking with design thinking is forming a distinct new field of systemic design. This paper presents a framework for systemic design as a mindset, methodology, and set of methods that together enable teams to learn, innovate, and adapt to a complex and dynamic environment. We suggest that a systemic design mindset is inquiring, open, integrative, collaborative, and centred. We propose a systemic design methodology composed of six main activities: framing, formulating, generating, reflecting, inquiring, and facilitating. We view systemic design methods as a flexible and open-ended set of procedures for facilitating group collaboration that are both systemic and designerly.  

  4. Graphical expression of thermodynamic characteristics of absorption process in ammonia-water system

    Directory of Open Access Journals (Sweden)

    Fortelný Zdeněk

    2012-04-01

    Full Text Available The adiabatic sorption is very interesting phenomenon that occurs when vapor of refrigerant is in contact with unsaturated liquid absorbent-refrigerant mixture and exchange of heat is forbid between the system and an environment. This contribution introduces new auxiliary lines that enable correct position determination of the adiabatic sorption process in the p-T-x diagram of ammoniawater system. The presented auxiliary lines were obtained from common functions for fast calculation of water-ammonia system properties. Absorption cycles designers often utilize p-t-x diagrams of working mixtures for first suggestion of new absorption cycles. The p-t-x diagrams enable fast correct determination of saturate states of liquid (and gaseous mixtures of refrigerants and absorbents. The working mixture isn’t only at saturated state during a real working cycle. If we know pressure and temperature of an unsaturated mixture, exact position determination is possible in the p-t-x diagrams too.

  5. Status and design of the Advanced Photon Source control system

    International Nuclear Information System (INIS)

    McDowell, W.; Knott, M.; Lenkszus, F.; Kraimer, M.; Arnold, N.; Daly, R.

    1993-01-01

    This paper presents the current status of the Advanced Photon Source (APS) control system. It will discuss the design decisions which led us to use industrial standards and collaborations with other laboratories to develop the APS control system. The system uses high performance graphic workstations and the X-windows Graphical User Interface (GUI) at the operator interface level. It connects to VME/VXI-based microprocessors at the field level using TCP/IP protocols over high performance networks. This strategy assures the flexibility and expansibility of the control system. A defined interface between the system components will allow the system to evolve with the direct addition of future, improved equipment and new capabilities

  6. Graphical Programming: A systems approach for telerobotic servicing of space assets

    International Nuclear Information System (INIS)

    Pinkerton, J.T.; Patten, R.

    1993-01-01

    Satellite servicing is in many ways analogous to subsea robotic servicing in the late 1970's. A cost effective, reliable, telerobotic capability had to be demonstrated before the oil companies invested money in deep water robot serviceable production facilities. In the same sense, aeronautic engineers will not design satellites for telerobotic servicing until such a quantifiable capability has been demonstrated. New space servicing systems will be markedly different than existing space robot systems. Past space manipulator systems, including the Space Shuttle's robot arm, have used master/slave technologies with poor fidelity, slow operating speeds and most importantly, in-orbit human operators. In contrast, new systems will be capable of precision operations, conducted at higher rates of speed, and be commanded via ground-control communication links. Challenges presented by this environment include achieving a mandated level of robustness and dependability, radiation hardening, minimum weight and power consumption, and a system which accommodates the inherent communication delay between the ground station and the satellite. There is also a need for a user interface which is easy to use, ensures collision free motions, and is capable of adjusting to an unknown workcell (for repair operations the condition of the satellite may not be known in advance). This paper describes the novel technologies required to deliver such a capability

  7. Liner system design

    International Nuclear Information System (INIS)

    Hutchinson, I.P.G.; Ellison, R.D.

    1992-01-01

    This paper discusses one of the most important regulatory and design decisions which is determining the type of liner system. The liner system includes a combination of low hydraulic conductivity and leakage control materials to be provided beneath a mine waste management unit to avoid seepage losses, which could result in an unacceptable threat to beneficial uses of ground water. This is more difficult for mine wastes than for other types of waste disposal because: The physical and chemical properties of mine wastes vary widely; The sizes )volume and areal extent) of mine waste management units is often very large so that the costs of liners can impact economic feasibility of some operations. The U.S. Congress considered the differences between mine wastes and other types of wastes when it passed the Bevill amendment to the Resource Conservation and Recovery Act (RCRA) in 1980. That amendment exempted most mine wastes from hazardous waste regulation until the United States Environmental Protection Agency (EPA) conducted a study to determine the appropriate degree of regulation for mine wastes. In 1986, the EPA issued a report recognizing that, with a few exceptions for certain processed materials, mine wastes do not present the same level of threat as other wastes and therefore should be regulated differently. An additional important factor which differentiates mine waste disposal management units form other solid waste disposal units is that, except in unusual circumstances, mine and process facilities are located where the mineral resource is being extracted. Therefore, the location of the mine waste disposal facilities cannot solely be based upon a site selection study. as a result, some mines are located where the distance or depth to a valuable water resource is relatively small, while others are located in remote desert areas with no contiguous surface water resources, and deep ground water of limited quantity and/or quality

  8. Toward a Shared Vocabulary for Visual Analysis: An Analytic Toolkit for Deconstructing the Visual Design of Graphic Novels

    Science.gov (United States)

    Connors, Sean P.

    2012-01-01

    Literacy educators might advocate using graphic novels to develop students' visual literacy skills, but teachers who lack a vocabulary for engaging in close analysis of visual texts may be reluctant to teach them. Recognizing this, teacher educators should equip preservice teachers with a vocabulary for analyzing visual texts. This article…

  9. Training a Mentally Retarded Woman to Work Competitively: Effect of Graphic Feedback and a Changing Criterion Design.

    Science.gov (United States)

    Davis, Paula; And Others

    1983-01-01

    An on-the-job coach provided graphic feedback on the food service performance of a moderately retarded young woman. Her performance improved to a production range acceptable for competive employment. Feedback from co-workers revealed, however, that she was still not functioning adequately. (CL)

  10. Computer-Aided dispatching system design specification

    Energy Technology Data Exchange (ETDEWEB)

    Briggs, M.G.

    1996-09-27

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This document outlines the negotiated requirements as agreed to by GTE Northwest during technical contract discussions. This system defines a commercial off-the-shelf computer dispatching system providing both test and graphic display information while interfacing with diverse alarm reporting system within the Hanford Site. This system provided expansion capability to integrate Hanford Fire and the Occurrence Notification Center. The system also provided back-up capability for the Plutonium Processing Facility (PFP).

  11. Evaluating Texts for Graphical Literacy Instruction: The Graphic Rating Tool

    Science.gov (United States)

    Roberts, Kathryn L.; Brugar, Kristy A.; Norman, Rebecca R.

    2015-01-01

    In this article, we present the Graphical Rating Tool (GRT), which is designed to evaluate the graphical devices that are commonly found in content-area, non-fiction texts, in order to identify books that are well suited for teaching about those devices. We also present a "best of" list of science and social studies books, which includes…

  12. Mikado: A graphic program

    Science.gov (United States)

    Secretan, Y.

    A discussion of the modular program Mikado is presented. Mikado was developed with the goal of creating a flexible graphic tool to display and help analyze the results of finite element fluid flow computations. Mikado works on unstructured meshes, with elements of mixed geometric type, but also offers the possibility of using structured meshes. The program can be operated by both menu and mouse (interactive), or by command file (batch). Mikado is written in FORTRAN, except for a few system dependent subroutines which are in C. It runs presently on Silicon Graphics' workstations and could be easily ported to the IBM-RISC System/6000 family of workstations.

  13. Structural design by CAD system

    International Nuclear Information System (INIS)

    Kim, Jhin Wung; Shim, Jae Ku; Kim, Sun Hoon; Kim, Dae Hong; Lee, Kyung Jin; Choi, Kyu Sup; Choi, In Kil; Lee, Dong Yong

    1988-12-01

    CAD systems are now widely used for the design of many engineering problems involving static, dynamic and thermal stress analyses of structures. In order to apply CAD systems to the structural analysis and design, the function of hardwares and softwares necessary for the CAD systems must be understood. The purpose of this study is to introduce the basic elements that are indispensible in the application of CAD systems to the analysis and design of structures and to give a thorough understanding of CAD systems to design engineers, so as to participate in the further technological developments of CAD systems. Due to the complexity and variety of the shape and size of the nowa-days structures, the need of new design technologies is growing for more efficient, accurate and economical design of structures. The application of CAD systems to structural engineering fields enables to improve structural engineering analysis and design technologies and also to obtain the standardization of the design process. An active introduction of rapidly developing CAD technologies will contribute to analyzing and designing structures more efficiently and reliably. Based on this report of the current status of the application of CAD systems to the structural analysis and design, the next goal is to develop the expert system which enables to perform the design of structures by CAD systems from the preliminary conceptual design to the final detail drawings automatically. (Author)

  14. A real-time GNSS-R system based on software-defined radio and graphics processing units

    Science.gov (United States)

    Hobiger, Thomas; Amagai, Jun; Aida, Masanori; Narita, Hideki

    2012-04-01

    Reflected signals of the Global Navigation Satellite System (GNSS) from the sea or land surface can be utilized to deduce and monitor physical and geophysical parameters of the reflecting area. Unlike most other remote sensing techniques, GNSS-Reflectometry (GNSS-R) operates as a passive radar that takes advantage from the increasing number of navigation satellites that broadcast their L-band signals. Thereby, most of the GNSS-R receiver architectures are based on dedicated hardware solutions. Software-defined radio (SDR) technology has advanced in the recent years and enabled signal processing in real-time, which makes it an ideal candidate for the realization of a flexible GNSS-R system. Additionally, modern commodity graphic cards, which offer massive parallel computing performances, allow to handle the whole signal processing chain without interfering with the PC's CPU. Thus, this paper describes a GNSS-R system which has been developed on the principles of software-defined radio supported by General Purpose Graphics Processing Units (GPGPUs), and presents results from initial field tests which confirm the anticipated capability of the system.

  15. Software design and code generation for the engineering graphical user interface of the ASTRI SST-2M prototype for the Cherenkov Telescope Array

    Science.gov (United States)

    Tanci, Claudio; Tosti, Gino; Antolini, Elisa; Gambini, Giorgio F.; Bruno, Pietro; Canestrari, Rodolfo; Conforti, Vito; Lombardi, Saverio; Russo, Federico; Sangiorgi, Pierluca; Scuderi, Salvatore

    2016-08-01

    ASTRI is an on-going project developed in the framework of the Cherenkov Telescope Array (CTA). An end- to-end prototype of a dual-mirror small-size telescope (SST-2M) has been installed at the INAF observing station on Mt. Etna, Italy. The next step is the development of the ASTRI mini-array composed of nine ASTRI SST-2M telescopes proposed to be installed at the CTA southern site. The ASTRI mini-array is a collaborative and international effort carried on by Italy, Brazil and South-Africa and led by the Italian National Institute of Astrophysics, INAF. To control the ASTRI telescopes, a specific ASTRI Mini-Array Software System (MASS) was designed using a scalable and distributed architecture to monitor all the hardware devices for the telescopes. Using code generation we built automatically from the ASTRI Interface Control Documents a set of communication libraries and extensive Graphical User Interfaces that provide full access to the capabilities offered by the telescope hardware subsystems for testing and maintenance. Leveraging these generated libraries and components we then implemented a human designed, integrated, Engineering GUI for MASS to perform the verification of the whole prototype and test shared services such as the alarms, configurations, control systems, and scientific on-line outcomes. In our experience the use of code generation dramatically reduced the amount of effort in development, integration and testing of the more basic software components and resulted in a fast software release life cycle. This approach could be valuable for the whole CTA project, characterized by a large diversity of hardware components.

  16. Computer graphics in engineering education

    CERN Document Server

    Rogers, David F

    2013-01-01

    Computer Graphics in Engineering Education discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) as an instructional material in engineering education. Each of the nine chapters of this book covers topics and cites examples that are relevant to the relationship of CAD-CAM with engineering education. The first chapter discusses the use of computer graphics in the U.S. Naval Academy, while Chapter 2 covers key issues in instructional computer graphics. This book then discusses low-cost computer graphics in engineering education. Chapter 4 discusses the uniform b

  17. Issues in holistic system design

    DEFF Research Database (Denmark)

    Lawall, Julia L.; Probst, Christian W.; Schultz, Ulrik Pagh

    2006-01-01

    The coordination of layers in computer and software systems is one of the main challenges in designing such systems today. In this paper we consider Holistic System Design as a way of integrating requirements and facilities of different system layers. We also discuss some of the challenges...

  18. Preliminary design review: Brayton Isotope Power System

    International Nuclear Information System (INIS)

    The design aspects covered include flight system design, design criteria/margins/reliability, GDS design, system analysis, materials, system assembly procedure, and government furnished equipment-BTPS

  19. Graphics workflow optimization when editing standard tasks using modern graphics editing programs

    OpenAIRE

    Khabirova, Maja

    2012-01-01

    This work focuses on the description and characteristics of common problems which graphic designers face daily when working for advertising agencies. This work describes tasks and organises them according to the type of graphic being processed and the types of output. In addition, this work describes the ways these common tasks can be completed using modern graphics editing software. It also provides a practical definition of a graphic designer and graphic agency. The aim of this work is to m...

  20. Computer System Design System-on-Chip

    CERN Document Server

    Flynn, Michael J

    2011-01-01

    The next generation of computer system designers will be less concerned about details of processors and memories, and more concerned about the elements of a system tailored to particular applications. These designers will have a fundamental knowledge of processors and other elements in the system, but the success of their design will depend on the skills in making system-level tradeoffs that optimize the cost, performance and other attributes to meet application requirements. This book provides a new treatment of computer system design, particularly for System-on-Chip (SOC), which addresses th

  1. Oklahoma's Mobile Computer Graphics Laboratory.

    Science.gov (United States)

    McClain, Gerald R.

    This Computer Graphics Laboratory houses an IBM 1130 computer, U.C.C. plotter, printer, card reader, two key punch machines, and seminar-type classroom furniture. A "General Drafting Graphics System" (GDGS) is used, based on repetitive use of basic coordinate and plot generating commands. The system is used by 12 institutions of higher education…

  2. System Design for Telecommunication Gateways

    CERN Document Server

    Bachmutsky, Alexander

    2010-01-01

    System Design for Telecommunication Gateways provides a thorough review of designing telecommunication network equipment based on the latest hardware designs and software methods available on the market. Focusing on high-end efficient designs that challenge all aspects of the system architecture, this book helps readers to understand a broader view of the system design, analyze all its most critical components, and select the parts that best fit a particular application. In many cases new technology trends, potential future developments, system flexibility and capability extensions are outline

  3. CRISP90 - SOFTWARE DESIGN ANALYZER SYSTEM

    Science.gov (United States)

    Tausworthe, R. C.

    1994-01-01

    The CRISP90 Software Design Analyzer System, an update of CRISP-80, is a set of programs forming a software design and documentation tool which supports top-down, hierarchic, modular, structured design and programming methodologies. The quality of a computer program can often be significantly influenced by the design medium in which the program is developed. The medium must foster the expression of the programmer's ideas easily and quickly, and it must permit flexible and facile alterations, additions, and deletions to these ideas as the design evolves. The CRISP90 software design analyzer system was developed to provide the PDL (Programmer Design Language) programmer with such a design medium. A program design using CRISP90 consists of short, English-like textual descriptions of data, interfaces, and procedures that are imbedded in a simple, structured, modular syntax. The display is formatted into two-dimensional, flowchart-like segments for a graphic presentation of the design. Together with a good interactive full-screen editor or word processor, the CRISP90 design analyzer becomes a powerful tool for the programmer. In addition to being a text formatter, the CRISP90 system prepares material that would be tedious and error prone to extract manually, such as a table of contents, module directory, structure (tier) chart, cross-references, and a statistics report on the characteristics of the design. Referenced modules are marked by schematic logic symbols to show conditional, iterative, and/or concurrent invocation in the program. A keyword usage profile can be generated automatically and glossary definitions inserted into the output documentation. Another feature is the capability to detect changes that were made between versions. Thus, "change-bars" can be placed in the output document along with a list of changed pages and a version history report. Also, items may be marked as "to be determined" and each will appear on a special table until the item is

  4. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    International Nuclear Information System (INIS)

    Randle, D.C.

    2000-01-01

    , controlled, and interfaced (Section 6.2). (3) Develop a preliminary design for the overall Subsurface Repository Integrated Control System functional architecture and graphically depict the operational features of this design through a series of control system functional block diagrams (Section 6.2). (4) Develop a physical architecture that presents a viable yet preliminary physical implementation for the Subsurface Repository Integrated Control System functional architecture (Section 6.3). (5) Develop an initial concept for an overall subsurface data communications network that can be used to integrate the various control systems comprising the Subsurface Repository Integrated Control System (Section 6.4). (6) Develop a preliminary central control room design for the Subsurface Repository Integrated Control System (Section 6.5). (7) Identify and discuss the general safety-related issues and design strategies with respect to development of the Subsurface Repository Integrated Control System (Section 6.6). (8) Discuss plans for the Subsurface Repository Integrated Control System's response to off-normal operations (Section 6.7). (9) Discuss plans and strategies for developing software for the Subsurface Repository Integrated Control System (Section 6.8)

  5. Lofar information system design

    NARCIS (Netherlands)

    Valentijn, E.; Belikov, A. N.

    2009-01-01

    The Lofar Information System is a solution for Lofar Long Term Archive that is capable to store and handle PBs of raw and processed data. The newly created information system is based on Astro-WISE - the information system for wide field astronomy. We review an adaptation of Astro-WISE for the new

  6. Graphical user interface (GUIDE) and semi-automatic system for the acquisition of anaglyphs

    Science.gov (United States)

    Canchola, Marco A.; Arízaga, Juan A.; Cortés, Obed; Tecpanecatl, Eduardo; Cantero, Jose M.

    2013-09-01

    Diverse educational experiences have shown greater acceptance of children to ideas related to science, compared with adults. That fact and showing great curiosity are factors to consider to undertake scientific outreach efforts for children, with prospects of success. Moreover now 3D digital images have become a topic that has gained importance in various areas, entertainment, film and video games mainly, but also in areas such as medical practice transcendental in disease detection This article presents a system model for 3D images for educational purposes that allows students of various grade levels, school and college, have an approach to image processing, explaining the use of filters for stereoscopic images that give brain impression of depth. The system is based on one of two hardware elements, centered on an Arduino board, and a software based on Matlab. The paper presents the design and construction of each of the elements, also presents information on the images obtained and finally how users can interact with the device.

  7. Collection Of Software For Computer Graphics

    Science.gov (United States)

    Hibbard, Eric A.; Makatura, George

    1990-01-01

    Ames Research Graphics System (ARCGRAPH) collection of software libraries and software utilities assisting researchers in generating, manipulating, and visualizing graphical data. Defines metafile format containing device-independent graphical data. File format used with various computer-graphics-manipulation and -animation software packages at Ames, including SURF (COSMIC Program ARC-12381) and GAS (COSMIC Program ARC-12379). Consists of two-stage "pipeline" used to put out graphical primitives. ARCGRAPH libraries developed on VAX computer running VMS.

  8. HISPLT: A history graphics postprocessor

    International Nuclear Information System (INIS)

    Thompson, S.L.; Kmetyk, L.N.

    1991-09-01

    HISPLT is a graphics postprocessor designed to plot time histories for wave propagation codes. HISPLT is available for CRAY UNICOS, CRAY CTSS, VAX VMS computer systems, and a variety of UNIX workstations. The original HISPLT code employs a database structure that allows the program to be used without modification to process data generated by many wave propagation codes. HISPLT has recently been modified to process time histories for the reactor safety analysis code, MELCOR. This report provides a complete set of input instructions for HISPLT and provides examples of the types of plotted output that can be generated using HISPLT. 6 refs., 8 figs., 5 tabs

  9. Introduction to regression graphics

    CERN Document Server

    Cook, R Dennis

    2009-01-01

    Covers the use of dynamic and interactive computer graphics in linear regression analysis, focusing on analytical graphics. Features new techniques like plot rotation. The authors have composed their own regression code, using Xlisp-Stat language called R-code, which is a nearly complete system for linear regression analysis and can be utilized as the main computer program in a linear regression course. The accompanying disks, for both Macintosh and Windows computers, contain the R-code and Xlisp-Stat. An Instructor's Manual presenting detailed solutions to all the problems in the book is ava

  10. Microwave systems design

    CERN Document Server

    Awang, Zaiki

    2014-01-01

    The aim of this book is to serve as a design reference for students and as an up-to-date reference for researchers. It also acts as an excellent introduction for newcomers to the field and offers established rf/microwave engineers a comprehensive refresher.  The content is roughly classified into two – the first two chapters provide the necessary fundamentals, while the last three chapters focus on design and applications. Chapter 2 covers detailed treatment of transmission lines. The Smith chart is utilized in this chapter as an important tool in the synthesis of matching networks for microwave amplifiers. Chapter 3 contains an exhaustive review of microstrip circuits, culled from various references. Chapter 4 offers practical design information on solid state amplifiers, while Chapter 5 contains topics on the design of modern planar filters, some of which were seldom published previously. A set of problems at the end of each chapter provides the readers with exercises which were compiled from actual uni...

  11. Graphical Diagnosis of Performances in Photovoltaic Systems: A Case Study in Southern Spain

    Directory of Open Access Journals (Sweden)

    Isabel Santiago

    2017-11-01

    Full Text Available The starting point of the operation and maintenance tasks in photovoltaic plants is the continuous monitoring and supervision of its components. The great amount of registered data requires a major improvement in the ways this information is processed and analyzed to rapidly detect any potential fault, without incurring additional costs. In this paper, a procedure to perform a detailed graphical supported analysis of the operation of photovoltaic installations, based on inverter data, and using a self-developed application, is presented. The program carries out the automated processing of the registered data, providing their access and visualization by means of color maps. These graphs allow a large volume of data set to be simultaneously represented in a readable way, enabling operation and maintenance operators to quickly detect patterns that would require any type of intervention. As a case study, the operation of a grid-connected photovoltaic plant located in southern Spain was studied during a period of three years. The average daily efficiency values of the PV modules and inverters were in the range of 7.6–14.6%, and 73.5–94% respectively. Moreover, the presence of shadings, as well as the hours and days mainly affected by this issue, was easily detected.

  12. Discourse in Systemic Operational Design

    National Research Council Canada - National Science Library

    DiPasquale, Joseph A

    2007-01-01

    .... The monograph presents alternative ways to consider discourse, the implications of this for theory of Systemic Operational Design, and how these alternatives can lead to a richer understanding...

  13. The design of multiplayer online video game systems

    Science.gov (United States)

    Hsu, Chia-chun A.; Ling, Jim; Li, Qing; Kuo, C.-C. J.

    2003-11-01

    The distributed Multiplayer Online Game (MOG) system is complex since it involves technologies in computer graphics, multimedia, artificial intelligence, computer networking, embedded systems, etc. Due to the large scope of this problem, the design of MOG systems has not yet been widely addressed in the literatures. In this paper, we review and analyze the current MOG system architecture followed by evaluation. Furthermore, we propose a clustered-server architecture to provide a scalable solution together with the region oriented allocation strategy. Two key issues, i.e. interesting management and synchronization, are discussed in depth. Some preliminary ideas to deal with the identified problems are described.

  14. VoxelMages: a general-purpose graphical interface for designing geometries and processing DICOM images for PENELOPE.

    Science.gov (United States)

    Giménez-Alventosa, V; Ballester, F; Vijande, J

    2016-12-01

    The design and construction of geometries for Monte Carlo calculations is an error-prone, time-consuming, and complex step in simulations describing particle interactions and transport in the field of medical physics. The software VoxelMages has been developed to help the user in this task. It allows to design complex geometries and to process DICOM image files for simulations with the general-purpose Monte Carlo code PENELOPE in an easy and straightforward way. VoxelMages also allows to import DICOM-RT structure contour information as delivered by a treatment planning system. Its main characteristics, usage and performance benchmarking are described in detail. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Designing flexible procurement systems

    OpenAIRE

    Hughes, Will

    1990-01-01

    The systems used for the procurement of buildings are organizational systems. They involve people in a series of strategic decisions, and a pattern of roles, responsibilities and relationships that combine to form the organizational structure of the project. To ensure effectiveness of the building team, this organizational structure needs to be contingent upon the environment within which the construction project takes place. In addition, a changing environment means that the organizational s...

  16. Computer-aided dispatching system design specification

    Energy Technology Data Exchange (ETDEWEB)

    Briggs, M.G.

    1997-12-16

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP).

  17. Computer-aided dispatching system design specification

    International Nuclear Information System (INIS)

    Briggs, M.G.

    1997-01-01

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP)

  18. bcl::Cluster : A method for clustering biological molecules coupled with visualization in the Pymol Molecular Graphics System.

    Science.gov (United States)

    Alexander, Nathan; Woetzel, Nils; Meiler, Jens

    2011-02-01

    Clustering algorithms are used as data analysis tools in a wide variety of applications in Biology. Clustering has become especially important in protein structure prediction and virtual high throughput screening methods. In protein structure prediction, clustering is used to structure the conformational space of thousands of protein models. In virtual high throughput screening, databases with millions of drug-like molecules are organized by structural similarity, e.g. common scaffolds. The tree-like dendrogram structure obtained from hierarchical clustering can provide a qualitative overview of the results, which is important for focusing detailed analysis. However, in practice it is difficult to relate specific components of the dendrogram directly back to the objects of which it is comprised and to display all desired information within the two dimensions of the dendrogram. The current work presents a hierarchical agglomerative clustering method termed bcl::Cluster. bcl::Cluster utilizes the Pymol Molecular Graphics System to graphically depict dendrograms in three dimensions. This allows simultaneous display of relevant biological molecules as well as additional information about the clusters and the members comprising them.

  19. Inductive Communication System Design Summary

    Science.gov (United States)

    1978-09-01

    The report documents the experience obtained during the design and development of the Inductive Communications System used in the Morgantown People Mover. The Inductive Communications System is used to provide wayside-to-vehicle and vehicle-to-waysid...

  20. Computer-graphic visualization of dynamics

    International Nuclear Information System (INIS)

    Stewart, H.B.

    1986-01-01

    As engineered systems become increasingly sophisticated and complex, questions of efficiency, reliability, and safety demand the application of more powerful methods of analysis. One indication of this is the accelerating trend away from purely static or quasi-steady system modeling toward models that include essentially dynamic behavior. It is here that the qualitative ideas of nonlinear dynamics, dealing as they do with the most typical behavior in real dynamical systems, can be expected to play an increasingly prominent role. As part of a continuing investigation of the most important low-order differential equations, an interactive computer graphics environment has been created for the study of systems in three-dimensional phase space. This environment makes available the basic control of both numerical simulation and graphic visualization by a specially designed menu system. A key ingredient in this environment is the possibility of graphic communication not only from machine to man, but also from man to machine. Thus to specify the starting point for a numerical integration, for example, the user points to a location in phase space on the screen of the graphics terminal (using crosshairs or a mouse and cursor), bypassing the necessity to give numerical values of the phase-space coordinates. By devising a flexible computer interface which implements conceptual approaches to phase-space analysis of dynamical systems, significant advances in understanding of prototypical differential equations have been achieved