WE-A-17A-05: Differences in Applicator Configuration and Dwell Loading Between Standard and Image-Guided Tandem and Ring (T and R) HDR Brachytherapy

International Nuclear Information System (INIS)

Damato, A; Cormack, R; Bhagwat, M; Buzurovic, I; Lee, L; Viswanathan, A

2014-01-01

Purpose: To investigate differences in: (i) relative location of the tandem and the ring compared to a rigid standard applicator model; and (ii) relative loading and changes in loading pattern between standard and image-guided planning. Methods: All T and R insertions performed in 2013 in our institution under CT- or MR-guidance were analyzed. Standard plans were generated using library applicator models with a fixed relationship between ring and tandem, standardized uniform dwell loading and normalization to point A. The graphic plans and the associated standard-plan dwell configurations were compared: the rings were rigidly registered, and the residual tandem shift, rotation and maximum distance between plan tandem dwell and corresponding model tandem dwell were calculated. The normalization ratio (NR = the ratio of graphic versus standard-plan total reference air kerma [TRAK]), the general loading difference (GLD = the difference between graphic and standard ratios of the tandem versus the ring TRAK), and the percent standard deviation (SD% = SD/mean) of the tandem and the ring TRAK for the graphic plan (all standard-plans SD% = 0) were calculated. Results: 71 T and R were analyzed. Residual tandem shift, rotation and maximum corresponding dwell distance were 1.2±0.8mm (0.4±0.4mm lateral, 0.9±0.8mm craniocaudal, 0.4±0.3mm anterior-posterior), 2.3±1.9deg and 3.4±2.3mm. NR was 0.86±0.11 indicating a lower overall loading of the graphic compared to the standard plans. GLD was -0.12±0.16 indicating a modest increased ring loading relative to the tandem in the graphic plans. SD% was 2.1±1.6% for tandem and 2.8±1.9% for ring, indicating small deviations from uniform loading. Conclusion: Variability in the relative locations of the tandem and the ring necessitates the independent registration of each component model for accurate digitization. Our clinical experience suggests that graphically planned T and R results on average in a lower total dose to the

Standardization of prostate brachytherapy treatment plans

International Nuclear Information System (INIS)

Ove, Roger; Wallner, Kent; Badiozamani, Kas; Korjsseon, Tammy; Sutlief, Steven

2001-01-01

Purpose: Whereas custom-designed plans are the norm for prostate brachytherapy, the relationship between linear prostate dimensions and volume calls into question the routine need for customized treatment planning. With the goal of streamlining the treatment-planning process, we have compared the treatment margins (TMs) achieved with one standard plan applied to patients with a wide range of prostate volumes. Methods and Materials: Preimplant transrectal ultrasound (TRUS) images of 50 unselected University of Washington patients with T1-T2 cancer and a prostate volume between 20 cc and 50 cc were studied. Patients were arbitrarily grouped into categories of 20-30 cc, 30-40 cc, and 40-50 cc. A standard 19-needle plan was devised for patients in the 30- to 40-cc range, using an arbitrary minimum margin of 5 mm around the gross tumor volume (GTV), making use of inverse planning technology to achieve 100% coverage of the target volume with accentuation of dose at the periphery and sparing of the central region. The idealized plan was applied to each patient's TRUS study. The distances (TMs) between the prostatic edge (GTV) and treated volume (TV) were determined perpendicular to the prostatic margin. Results: Averaged over the entire patient group, the ratio of thickness to width was 1.4, whereas the ratio of length to width was 1.3. These values were fairly constant over the range of volumes, emphasizing that the prostate retains its general shape as volume increases. The idealized standard plan was overlaid on the ultrasound images of the 17 patients in the 30- to 40-cc group and the V100, the percentage of target volume receiving 100% or more of the prescription dose, was 98% or greater for 15 of the 17 patients. The lateral and posterior TMs fell within a narrow range, most being within 2 mm of the idealized 5-mm TM. To estimate whether a 10-cc volume-interval stratification was reasonable, the standard plan generated from the 30- to 40-cc prostate model was

Engineering Design Graphics: Into the 21st Century

Science.gov (United States)

Harris, La Verne Abe; Meyers, Frederick

2007-01-01

Graphical plans for construction of machinery and architecture have evolved over the last 6,000 years beginning from hieroglyphics to drawings on printable media, from the "Golden Age" of engineering graphics to the innovation of computer graphics and prototyping. The evolution of engineering design graphics as a profession has also evolved. Years…

The graphics future in scientific applications-trends and developments in computer graphics

CERN Document Server

Enderle, G

1982-01-01

Computer graphics methods and tools are being used to a great extent in scientific research. The future development in this area will be influenced both by new hardware developments and by software advances. On the hardware sector, the development of the raster technology will lead to the increased use of colour workstations with more local processing power. Colour hardcopy devices for creating plots, slides, or movies will be available at a lower price than today. The first real 3D-workstations will appear on the marketplace. One of the main activities on the software sector is the standardization of computer graphics systems, graphical files, and device interfaces. This will lead to more portable graphical application programs and to a common base for computer graphics education.

A new strategic neurosurgical planning tool for brainstem cavernous malformations using interactive computer graphics with multimodal fusion images.

Science.gov (United States)

Kin, Taichi; Nakatomi, Hirofumi; Shojima, Masaaki; Tanaka, Minoru; Ino, Kenji; Mori, Harushi; Kunimatsu, Akira; Oyama, Hiroshi; Saito, Nobuhito

2012-07-01

In this study, the authors used preoperative simulation employing 3D computer graphics (interactive computer graphics) to fuse all imaging data for brainstem cavernous malformations. The authors evaluated whether interactive computer graphics or 2D imaging correlated better with the actual operative field, particularly in identifying a developmental venous anomaly (DVA). The study population consisted of 10 patients scheduled for surgical treatment of brainstem cavernous malformations. Data from preoperative imaging (MRI, CT, and 3D rotational angiography) were automatically fused using a normalized mutual information method, and then reconstructed by a hybrid method combining surface rendering and volume rendering methods. With surface rendering, multimodality and multithreshold techniques for 1 tissue were applied. The completed interactive computer graphics were used for simulation of surgical approaches and assumed surgical fields. Preoperative diagnostic rates for a DVA associated with brainstem cavernous malformation were compared between conventional 2D imaging and interactive computer graphics employing receiver operating characteristic (ROC) analysis. The time required for reconstruction of 3D images was 3-6 hours for interactive computer graphics. Observation in interactive mode required approximately 15 minutes. Detailed anatomical information for operative procedures, from the craniotomy to microsurgical operations, could be visualized and simulated three-dimensionally as 1 computer graphic using interactive computer graphics. Virtual surgical views were consistent with actual operative views. This technique was very useful for examining various surgical approaches. Mean (±SEM) area under the ROC curve for rate of DVA diagnosis was significantly better for interactive computer graphics (1.000±0.000) than for 2D imaging (0.766±0.091; pcomputer graphics than with 2D images. Interactive computer graphics was also useful in helping to plan the surgical

Developing standardized facility contingency plans

International Nuclear Information System (INIS)

Davidson, D.A.

1993-01-01

Texaco consists of several operating departments that are, in effect, independent companies. Each of these departments is responsible for complying with all environmental laws and regulations. This includes the preparation by each facility to respond to an oil spill at that location. For larger spills, however, management of the response will rest with corporate regional response teams. Personnel from all departments make up the regional teams. In 1990, Congress passed the Oil Pollution Act. In 1991, the US Coast Guard began developing oil spill response contingency plan regulations, which they are still working on. Meanwhile, four of the five west coast states have also passed laws requiring contingency plans. (Only Hawaii has chosen to wait and see what the federal regulations will entail). Three of the states have already adopted regulations. Given these laws and regulations, along with its corporate structure, Texaco addressed the need to standardize local facility plans as well as its response organization. This paper discusses how, by working together, the Texaco corporate international oil spill response staff and the Texaco western region on-scene commander developed: A standard contingency plan format crossing corporate boundaries and meeting federal and state requirements. A response organization applicable to any size facility or spill. A strategy to sell the standard contingency plan and response organization to the operating units

Reverse-engineering graphical innovation: an introduction to graphical regimes

Directory of Open Access Journals (Sweden)

Dominic Arsenault

2013-03-01

Full Text Available Technological innovation in the video games industry is a rich area of research that has barely been explored as of yet. Gamers are always clamoring for novelty and a remedy to the oft-decried “sequelitis” that “plagues” the industry, while game publishers and platform holders secretly plan a next-gen platform to capture the ever-shifting market. In this light, the importance of graphics cannot be understated, as it is usually taken for granted in game historiography that “[g]ame graphics were, and to a large extent still are, the main criteria by which advancing video game technology is benchmarked” (Wolf, 2003, p.53.

A standard format and a graphical user interface for spin system specification.

Science.gov (United States)

Biternas, A G; Charnock, G T P; Kuprov, Ilya

2014-03-01

We introduce a simple and general XML format for spin system description that is the result of extensive consultations within Magnetic Resonance community and unifies under one roof all major existing spin interaction specification conventions. The format is human-readable, easy to edit and easy to parse using standard XML libraries. We also describe a graphical user interface that was designed to facilitate construction and visualization of complicated spin systems. The interface is capable of generating input files for several popular spin dynamics simulation packages. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Management plan for the Nuclear Standards Program

International Nuclear Information System (INIS)

1979-11-01

This Management Plan was prepared to describe the manner in which Oak Ridge National Laboratory will provide technical management of the Nuclear Standards Program. The organizational structure that has been established within ORNL for this function is the Nuclear Standards Management Center, which includes the Nuclear Standards Office (NSO) already in existence at ORNL. This plan is intended to support the policies and practices for the development and application of technical standards in ETN projects, programs, and technology developments as set forth in a standards policy memorandum from the DOE Program Director for Nuclear Energy

75 FR 14386 - Interpretation of Transmission Planning Reliability Standard

Science.gov (United States)

2010-03-25

...] Interpretation of Transmission Planning Reliability Standard March 18, 2010. AGENCY: Federal Energy Regulatory... transmission planning Reliability Standard TPL-002-0 provides that planning authorities and transmission... Reliability Standard TPL-002-0. In this order, the Commission proposes to reject NERC's proposed...

Graphics-oriented application language for LASNEX

International Nuclear Information System (INIS)

Stringer, L.M.

1985-01-01

GOAL, a graphics-oriented application language, was developed to help physicists understand the large amounts of data produced by LASNEX. GOAL combines many aspects of the old LASNEX language, computer graphics, and standard computer languages

7 CFR 611.10 - Standards, guidelines, and plans.

Science.gov (United States)

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Standards, guidelines, and plans. 611.10 Section 611... § 611.10 Standards, guidelines, and plans. (a) NRCS conducts soil surveys under national standards and guidelines for naming, classifying, and interpreting soils and for disseminating soil survey information. (b...

Study on Planning Standards for Urban Renewal Areas in Shenzhen

Institute of Scientific and Technical Information of China (English)

2011-01-01

The paper starts from the origin and evolution of city planning standards of Shenzhen before analyzing the new demands for the standards by the development of city renewal amid city transition,and establishes a primary framework for the planning standards and requirements.In addition,on the basis of comparing with the formulation of planning standards of Hong Kong,Shanghai,and Changsha,the paper carries out a discussion on the formulation ideas and main contents of the planning standards for the urban renewal areas in Shenzhen.Moreover,the paper also analyzes the standards for renewal objects,scope,mode,functions guidance,development control,and public facilities,all of which are quite heated issues and key elements in the process of formulation and approval of renewal planning,in order to improve the institutional structure of the City Planning Standards and Requirements of Shenzhen and meet the government’s demand in realizing a refined management.

Action plan for photovoltaic standards

Energy Technology Data Exchange (ETDEWEB)

Oldach, R.

1999-07-01

This report examines the present situation regarding international standards governing photovoltaic (PV) systems and components, and seeks to identify barriers to the commercialisation of PV systems in the UK due to the absence of standards and codes of practice, and develop an action plan to overcome these barriers. An overview of standardisation bodies and standard generation mechanisms is presented, and the PV cells and modules, stand-alone PV systems, utility interconnection with PV systems, and building integration of PV are reviewed.

Standard review plan for the review and evaluation of emergency plans for research and test reactors

International Nuclear Information System (INIS)

1983-10-01

This document provides a Standard Review Plan to assure that complete and uniform reviews are made of research and test reactor radiological emergency plans. The report is organized under ten planning standards which correspond to the guidance criteria in American National Standard ANSI/ANS 15.16 - 1982 as endorsed by Revision 1 to Regulatory Guide 2.6. The applicability of the items under each planning standard is indicated by subdivisions of the steady-state thermal power levels at which the reactors are licensed to operate. Standard emergency classes and example action levels for research and test reactors which should initiate these classes are given in an Appendix. The content of the emergency plan is as follows: the emergency plan addresses the necessary provisions for coping with radiological emergencies. Activation of the emergency plan is in response to the emergency action levels. In addition to addressing those severe emergencies that will fall within one of the standard emergency classes, the plan also discusses the necessary provisions to deal with radiological emergencies of lesser severity that can occur within the operations boundary. The emergency plan allows for emergency personnel to deviate from actions described in the plan for unusual or unanticipated conditions

Programming Language Software For Graphics Applications

Science.gov (United States)

Beckman, Brian C.

1993-01-01

New approach reduces repetitive development of features common to different applications. High-level programming language and interactive environment with access to graphical hardware and software created by adding graphical commands and other constructs to standardized, general-purpose programming language, "Scheme". Designed for use in developing other software incorporating interactive computer-graphics capabilities into application programs. Provides alternative to programming entire applications in C or FORTRAN, specifically ameliorating design and implementation of complex control and data structures typifying applications with interactive graphics. Enables experimental programming and rapid development of prototype software, and yields high-level programs serving as executable versions of software-design documentation.

PAW [Physics Analysis Workstation] at Fermilab: CORE based graphics implementation of HIGZ [High Level Interface to Graphics and Zebra

International Nuclear Information System (INIS)

Johnstad, H.

1989-06-01

The Physics Analysis Workstation system (PAW) is primarily intended to be the last link in the analysis chain of experimental data. The graphical part of PAW is based on HIGZ (High Level Interface to Graphics and Zebra), which is based on the OSI and ANSI standard Graphics Kernel System (GKS). HIGZ is written in the context of PAW. At Fermilab, the CORE based graphics system DI-3000 by Precision Visuals Inc., is widely used in the analysis of experimental data. The graphical part of the PAW routines has been totally rewritten and implemented in the Fermilab environment. 3 refs

The graphics future in scientific applications

International Nuclear Information System (INIS)

Enderle, G.

1982-01-01

Computer graphics methods and tools are being used to a great extent in scientific research. The future development in this area will be influenced both by new hardware developments and by software advances. On the hardware sector, the development of the raster technology will lead to the increased use of colour workstations with more local processing power. Colour hardcopy devices for creating plots, slides, or movies will be available at a lower price than today. The first real 3D-workstations appear on the marketplace. One of the main activities on the software sector is the standardization of computer graphics systems, graphical files, and device interfaces. This will lead to more portable graphical application programs and to a common base for computer graphics education. (orig.)

Determining Normal-Distribution Tolerance Bounds Graphically

Science.gov (United States)

Mezzacappa, M. A.

1983-01-01

Graphical method requires calculations and table lookup. Distribution established from only three points: mean upper and lower confidence bounds and lower confidence bound of standard deviation. Method requires only few calculations with simple equations. Graphical procedure establishes best-fit line for measured data and bounds for selected confidence level and any distribution percentile.

Overview of Graphical User Interfaces.

Science.gov (United States)

Hulser, Richard P.

1993-01-01

Discussion of graphical user interfaces for online public access catalogs (OPACs) covers the history of OPACs; OPAC front-end design, including examples from Indiana University and the University of Illinois; and planning and implementation of a user interface. (10 references) (EA)

Computer graphics as an information means for power plants

International Nuclear Information System (INIS)

Kollmannsberger, J.; Pfadler, H.

1990-01-01

Computer-aided graphics have proved increasingly successful as a help in process control in large plants. The specific requirements for the system and the methods of planning and achieving graphic systems in powerstation control rooms are described. Experience from operation is evaluated from completed plants. (orig.) [de

United States Shipbuilding Standards Master Plan

National Research Council Canada - National Science Library

Horsmon, Jr, Albert W

1992-01-01

This Shipbuilding Standards Master Plan was developed using extensive surveys, interviews, and an iterative editing process to include the views and opinions of key persons and organizations involved...

The appliance of graphics modeling in nuclear plant information system

International Nuclear Information System (INIS)

Bai Zhe; Li Guofang

2010-01-01

The nuclear plants contain a lot of sub-system, such as operation management, manufacture system, inventory system, human resource system and so forth. The standardized data graphics modeling technology can ensure the data interaction, compress the design cycle, avoid the replicated design, ensure the data integrity and consistent. The standardized data format which is on the basis of STEP standard and complied with XML is competent tool in different sub-system of nuclear plants. In order to meet this demand, a data graphics modeling standard is proposed. It is shown the relationship between systems, in system, between data by the standard. The graphic modeling effectively improves the performance between systems, designers, engineers, operations, supports department. It also provides the reliable and available data source for data mining and business intelligence. (authors)

ASME nuclear codes and standards risk management strategic planning

International Nuclear Information System (INIS)

Hill, Ralph S. III; Balkey, Kenneth R.; Erler, Bryan A.; Wesley Rowley, C.

2007-01-01

This paper is prepared in honor and in memory of the late Professor Emeritus Yasuhide Asada to recognize his contributions to ASME Nuclear Codes and Standards initiatives, particularly those related to risk-informed technology and System Based Code developments. For nearly two decades, numerous risk-informed initiatives have been completed or are under development within the ASME Nuclear Codes and Standards organization. In order to properly manage the numerous initiatives currently underway or planned for the future, the ASME Board on Nuclear Codes and Standards (BNCS) has an established Risk Management Strategic Plan (Plan) that is maintained and updated by the ASME BNCS Risk Management Task Group. This paper presents the latest approved version of the plan beginning with a background of applications completed to date, including the recent probabilistic risk assessment (PRA) standards developments for nuclear power plant applications. The paper discusses planned applications within ASME Nuclear Codes and Standards that will require expansion of the ASME PRA Standard to support new advanced light water reactor and next generation reactor developments, such as for high temperature gas-cooled reactors. Emerging regulatory developments related to risk-informed, performance- based approaches are summarized. A long-term vision for the potential development and evolution to a nuclear systems code that adopts a risk-informed approach across a facility life-cycle (design, construction, operation, maintenance, and closure) is also summarized. Finally, near term and long term actions are defined across the ASME Nuclear Codes and Standards organizations related to risk management, including related U.S. regulatory activities. (author)

SIGNS LANGUAGE IN GRAPHICAL COMMUNICATION MECHANICAL DRAWING: THE BASIC LANGUAGE IN GRAPHICAL COMMUNICATION

OpenAIRE

BADEA Florina; PETRESCU Ligia

2010-01-01

The paper presents general notions about graphical language used in engineering, the international standards used for representing objects and also the most important software applications used in Computer Aided Design for the development of products in engineering.

Comparisons of ANSI standards cited in the NRC standard review plan, NUREG-0800 and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

1995-11-01

This report provides the results of comparisons of the cited and latest versions of ANSI standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

Comparisons of ASTM standards cited in the NRC standard review plan, NUREG-0800 and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

1995-10-01

This report provides the results of comparisons of the cited and latest versions of ASTM standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

EPA Communications Stylebook: Graphics Guide

Science.gov (United States)

Includes standards and guidance for graphics typography, layout, composition, color scheme, appropriate use of charts and graphs, logos and related symbols, and consistency with the message of accompanied content.

Storyboard dalam Pembuatan Motion Graphic

Directory of Open Access Journals (Sweden)

Satrya Mahardhika

2013-10-01

Full Text Available Motion graphics is one category in the animation that makes animation with lots of design elements in each component. Motion graphics needs long process including preproduction, production, and postproduction. Preproduction has an important role so that the next stage may provide guidance or instructions for the production process or the animation process. Preproduction includes research, making the story, script, screenplay, character, environment design and storyboards. The storyboard will be determined through camera angles, blocking, sets, and many supporting roles involved in a scene. Storyboard is also useful as a production reference in recording or taping each scene in sequence or as an efficient priority. The example used is an ad creation using motion graphic animation storyboard which has an important role as a blueprint for every scene and giving instructions to make the transition movement, layout, blocking, and defining camera movement that everything should be done periodically in animation production. Planning before making the animation or motion graphic will make the job more organized, presentable, and more efficient in the process.  

SRS ES ampersand H standards compliance program management plan

International Nuclear Information System (INIS)

Hearn, W.H.

1993-01-01

On March 8, 1990, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 90-2 to the Secretary of Energy. This recommendation, based upon the DNFSB's initial review and evaluation of the content and implementation of standards relating to the design, construction, operations, and decommissioning of defense nuclear facilities of the Department of Energy (DOE), called for three actions: (1) identification of specific standards that apply to design, construction, operation and decommissioning of DOE facilities; (2) assessment of the adequacy of those standards for protecting public health and safety; and (3) determination of the extent to which they have and are being implemented. This document defines the elements of the SRS program required to support the HQ program in response to DNFSB Recommendation 90-2. The objective is to ensure a consistent approach for all sitewide ES and H Standards Compliance Program efforts that satisfied the intent of Recommendation 90-2 and the HQ 90-2 Implementation Plan in a cost-effective manner. The methodology and instructions for implementation of the SRS program are contained in the Standards Compliance Program Implementation Plan. The Management Plan shall be used in conjunction with the Implementation Plan

Air Pollution Monitoring | Air Quality Planning & Standards ...

Science.gov (United States)

2016-06-08

The basic mission of the Office of Air Quality Planning and Standards is to preserve and improve the quality of our nation's air. To accomplish this, OAQPS must be able to evaluate the status of the atmosphere as compared to clean air standards and historical information.

SIGNS LANGUAGE IN GRAPHICAL COMMUNICATION MECHANICAL DRAWING: THE BASIC LANGUAGE IN GRAPHICAL COMMUNICATION

Directory of Open Access Journals (Sweden)

BADEA Florina

2010-07-01

Full Text Available The paper presents general notions about graphical language used in engineering, the international standards used for representing objects and also the most important software applications used in Computer Aided Design for the development of products in engineering.

Printing--Graphic Arts--Graphic Communications

Science.gov (United States)

Hauenstein, A. Dean

1975-01-01

Recently, "graphic arts" has shifted from printing skills to a conceptual approach of production processes. "Graphic communications" must embrace the total system of communication through graphic media, to serve broad career education purposes; students taught concepts and principles can be flexible and adaptive. The author…

Printer Graphics Package

Science.gov (United States)

Blanchard, D. C.

1986-01-01

Printer Graphics Package (PGP) is tool for making two-dimensional symbolic plots on line printer. PGP created to support development of Heads-Up Display (HUD) simulation. Standard symbols defined with HUD in mind. Available symbols include circle, triangle, quadrangle, window, line, numbers, and text. Additional symbols easily added or built up from available symbols.

Understanding the Graphical Challenges Faced by Vision-Impaired Students in Australian Universities

Science.gov (United States)

Butler, Matthew; Holloway, Leona; Marriott, Kim; Goncu, Cagatay

2017-01-01

Information graphics such as plots, maps, plans, charts, tables and diagrams form an integral part of the student learning experience in many disciplines. However, for a vision impaired student accessing such graphical materials can be problematic. This research seeks to understand the current state of accessible graphics provision in Australian…

77 FR 26714 - Transmission Planning Reliability Standards

Science.gov (United States)

2012-05-07

... Reliability Standards for the Bulk-Power System, Order No. 693, FERC Stats. & Regs. ] 31,242, order on reh'g... Standards for the Bulk Power System, 130 FERC ] 61,200 (2010) (March 2010 Order). \\12\\ Mandatory Reliability... excluded from future planning assessments and its potential impact to bulk electric system reliability...

Alignment verification in stereotactic radiosurgery with use of graphic arts film

International Nuclear Information System (INIS)

Sweet, J.; Lamba, M.

1990-01-01

This paper evaluates the use of graphic arts film for field alignment verification of linear accelerator-based stereotactic radiosurgery. The characteristic curve was generated for Fuji RO-100 graphic arts film in a standard leaded radiation therapy cassette at 6 MV. The linear portion of the curve and the film contrast are presented and their clinical advantages discussed. The high contrast of this graphic arts film improves visualization of the 5-mm ball bearing (simulated target) in small, circular treatment fields. Comparison with standard port film demonstrates the large linear range of the graphic arts film, which proved useful in visualization of the simulated target within the small, circular treatment field

Fertility intentions and outcomes: Implementing the Theory of Planned Behavior with graphical models.

Science.gov (United States)

Mencarini, Letizia; Vignoli, Daniele; Gottard, Anna

2015-03-01

This paper studies fertility intentions and their outcomes, analyzing the complete path leading to fertility behavior according to the social psychological model of Theory Planned Behavior (TPB). We move beyond existing research using graphical models to have a precise understanding, and a formal description, of the developmental fertility decision-making process. Our findings yield new results for the Italian case which are empirically robust and theoretically coherent, adding important insights to the effectiveness of the TPB for fertility research. In line with TPB, all intentions' primary antecedents are found to be determinants of the level of fertility intentions, but do not affect fertility outcomes, being pre-filtered by fertility intentions. Nevertheless, in contrast with TPB, background factors are not fully mediated by intentions' primary antecedents, influencing directly fertility intentions and even fertility behaviors. Copyright © 2014 Elsevier Ltd. All rights reserved.

Standard Guide for Preparing Characterization Plans for Decommissioning Nuclear Facilities

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This standard guide applies to developing nuclear facility characterization plans to define the type, magnitude, location, and extent of radiological and chemical contamination within the facility to allow decommissioning planning. This guide amplifies guidance regarding facility characterization indicated in ASTM Standard E 1281 on Nuclear Facility Decommissioning Plans. This guide does not address the methodology necessary to release a facility or site for unconditional use. This guide specifically addresses: 1.1.1 the data quality objective for characterization as an initial step in decommissioning planning. 1.1.2 sampling methods, 1.1.3 the logic involved (statistical design) to ensure adequate characterization for decommissioning purposes; and 1.1.4 essential documentation of the characterization information. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate saf...

Standard plans for timber bridge superstructures

Science.gov (United States)

James P. Wacker; Matthew S. Smith

2001-01-01

These standardized bridge plans are for superstructures consisting of treated timber. Seven superstructure types are includes: five longitudinal and two transverse deck systems. Both HS520 and HS25 loadings are included, along with L/360 and L/500 deflection criteria.

Plan for implementing EPA standards for UMTRA sites

International Nuclear Information System (INIS)

1984-01-01

This plan is designed to be a generic presentation on methodology that will be followed in implementing the EPA standards. Its applicability covers 24 inactive uranium mill tailings sites and approximately 8000 vicinity properties, no two of which are alike. This diversity dictates the more general approach of this plan. In practice, however, site-specific application will be implemented and will require extensive consultation with the appropriate state or tribe and the NRC. In addition, information concerning relevant Federal, state, or tribal standards and regulations will be considered along with any data that may assist in the evaluations. Throughout this process, DOE will encourage state and tribal participation to ensure that compliance with the EPA standards will be achieved

Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

Science.gov (United States)

Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

1990-01-01

We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

7 CFR 1717.605 - Design standards, plans and specifications, construction standards, and RUS accepted materials.

Science.gov (United States)

2010-01-01

..., construction standards, and RUS accepted materials. 1717.605 Section 1717.605 Agriculture Regulations of the... standards, plans and specifications, construction standards, and RUS accepted materials. All borrowers... system design, construction standards, and the use of RUS accepted materials. Borrowers must comply with...

Operational computer graphics in the flight dynamics environment

Science.gov (United States)

Jeletic, James F.

1989-01-01

Over the past five years, the Flight Dynamics Division of the National Aeronautics and Space Administration's (NASA's) Goddard Space Flight Center has incorporated computer graphics technology into its operational environment. In an attempt to increase the effectiveness and productivity of the Division, computer graphics software systems have been developed that display spacecraft tracking and telemetry data in 2-d and 3-d graphic formats that are more comprehensible than the alphanumeric tables of the past. These systems vary in functionality from real-time mission monitoring system, to mission planning utilities, to system development tools. Here, the capabilities and architecture of these systems are discussed.

A graphics based remote handling control system

International Nuclear Information System (INIS)

Leinemann, K.

1984-08-01

A control and simulation system with an interactive graphic man-machine interface is proposed for the articulated boom in JET. The system shall support 1. the study of boom movements in the planning phase, 2. the training of operators by appropriate simulations, 3. the programming of boom movements, and 4. the on-line control of the boom. A combination of computer graphic display and TV-images is proposed for providing optimum recognition of the actual situation and for echoing to the operator actions. (orig.) [de

Standard review plan for the review and evaluation of emergency plans for research and test reactors. Technical report

International Nuclear Information System (INIS)

Bates, E.F.; Grimes, B.K.; Ramos, S.L.

1982-05-01

This document provides a Standard Review Plan for the guidance of the NRC staff to assure that complete and uniform reviews are made of research and test reactor emergency plans. The report is organized under ten planning standards which correspond to the guidance criteria in Draft II of ANSI/ANS 15.16 as endorsed by Revision 1 to Regulatory Guide 2.6. The applicability of the items under each planning standard is indicated by subdivisions of the steady state thermal power levels at which the reactors are licensed to operate. Standard emergency classes and example action levels for research and test reactors which should initiate these classes are given in an Appendix

Intraoperative HDR brachytherapy for rectal cancer using a flexible intraoperative template: standard plans versus individual planning

International Nuclear Information System (INIS)

Kolkman-Deurloo, Inger-Karine K.; Nuyttens, Joost J.; Hanssens, Patrick E.J.; Levendag, Peter C.

2004-01-01

HDR intraoperative brachytherapy (IOBT) is applied to locally advanced rectal tumors using a 5 mm thick flexible intraoperative template (FIT). To reduce the procedure time, treatment planning is performed using standard plans that neglect the curvature of the FIT. We have calculated the individual treatment plan, based on the real geometry of the FIT, and the dose at clips placed during surgery. A mean treatment dose of 9.55±0.21 Gy was found for the individual plan, compared to the prescribed 10 Gy (P<0.0001). The mean central dose was 10.03±0.10 Gy in the standard plan and 9.20±0.32 Gy in the individual plan (P<0.0001). The mean dose at the corners of the FIT was 10.3 Gy in the standard plan and ranged between 10.3 and 10.5 Gy in the individual plan. In 63% of the clips, the dose was larger than 15.0 Gy, which is equivalent to a gap between the FIT and the target smaller than 5 mm. In 18% of the clips, the dose was smaller than 13.0 Gy indicating that locally the gap was larger than 5 mm. Clinical practice will have to prove if these small dose deviations influence the clinical outcome

Computer-supported planning on graphic terminals in the staff divisions of hard coal mines. Rechnergestuetzte Planung an grafischen Arbeitsplaetzen in den Stabsstellen von Steinkohlenbergwerken

Energy Technology Data Exchange (ETDEWEB)

Seeliger, A [Technische Hochschule Aachen (Germany)

1990-01-01

Analysis of the planning activity in the planning department of German hard coal mines have shown that in some branches of the planning process productivity and creativity of the involved experts can be increased, potentials for rationalization be opened up and the cooperation between different engineering disciplines be improved by using computer network systems in combination with graphic systems. This paper reports about the computer-supported planning system 'Grube', which has been developed at the RWTH (technical university) Aachen, and its applications in mine surveying, electro-technical and mechanical planning as well as in the planning of ventilation systems and detailed mine planning. The software module GRUBE-W, which will be in future the centre of the working place for the mine ventilation planning of the Ruhrkohle AG, is discussed in detail. (orig.).

Standard Review Plan Maintenance Program implementing procedures document

International Nuclear Information System (INIS)

1996-11-01

The implementing Procedures Document (IPD) was developed by the Inspection Program Projects Branch, Office of Nuclear Reactor Regulation, with assistance from Pacific Northwest National Laboratory, for the Standard Review Plan Maintenance Program (SRP-MP). The SRP-MP was established to maintain the Standard Review Plan (SRP) on an on-going basis. The IPD provides guidance, including an overall approach and procedures, for SRP-MP tasks. The objective of the IPD is to ensure that modifications to SRP need to reflect current NRC requirements and guidance are identified and that a consistent methodology is used to develop and revise SRP sections

A Graphical Solution for Espaces Verts

CERN Document Server

Skelton, K

1999-01-01

'Espaces Verts' is responsible for the landscaping of the green areas, the cleaning of the roads, pavements, and car parks on the CERN site. This work is carried out by a contracting company. To control the work previously, there was a database of all the areas included in the contract and paper plans of the site. Given the size of the site the ideal solution was considered to be a visual system which integrates the maps and the database. To achieve this, the Surveying Department's graphical information system was used, linking it to the database for Espaces Verts, thus enabling the presentation of graphical thematic queries. This provides a useful management tool, which facilitates the task of ensuring that the contracting company carries out the work according to the agreed planning, and gives precise measurement of the site and thus of the contract. This paper will present how this has been achieved.

pedigreejs: a web-based graphical pedigree editor.

Science.gov (United States)

Carver, Tim; Cunningham, Alex P; Babb de Villiers, Chantal; Lee, Andrew; Hartley, Simon; Tischkowitz, Marc; Walter, Fiona M; Easton, Douglas F; Antoniou, Antonis C

2018-03-15

The collection, management and visualization of clinical pedigree (family history) data is a core activity in clinical genetics centres. However, clinical pedigree datasets can be difficult to manage, as they are time consuming to capture, and can be difficult to build, manipulate and visualize graphically. Several standalone graphical pedigree editors and drawing applications exist but there are no freely available lightweight graphical pedigree editors that can be easily configured and incorporated into web applications. We developed 'pedigreejs', an interactive graphical pedigree editor written in JavaScript, which uses standard pedigree nomenclature. Pedigreejs provides an easily configurable, extensible and lightweight pedigree editor. It makes use of an open-source Javascript library to define a hierarchical layout and to produce images in scalable vector graphics (SVG) format that can be viewed and edited in web browsers. The software is freely available under GPL licence (https://ccge-boadicea.github.io/pedigreejs/). tjc29@cam.ac.uk. Supplementary data are available at Bioinformatics online.

Graphic Designer/Production Coordinator | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

Provides design and graphic services for print- and Web-based publishing;; Initiates designs and carries out ... process, ensuring that such suppliers meet appropriate standards of quality and service at reasonable cost; ... Internal Services.

A Linux Workstation for High Performance Graphics

Science.gov (United States)

Geist, Robert; Westall, James

2000-01-01

The primary goal of this effort was to provide a low-cost method of obtaining high-performance 3-D graphics using an industry standard library (OpenGL) on PC class computers. Previously, users interested in doing substantial visualization or graphical manipulation were constrained to using specialized, custom hardware most often found in computers from Silicon Graphics (SGI). We provided an alternative to expensive SGI hardware by taking advantage of third-party, 3-D graphics accelerators that have now become available at very affordable prices. To make use of this hardware our goal was to provide a free, redistributable, and fully-compatible OpenGL work-alike library so that existing bodies of code could simply be recompiled. for PC class machines running a free version of Unix. This should allow substantial cost savings while greatly expanding the population of people with access to a serious graphics development and viewing environment. This should offer a means for NASA to provide a spectrum of graphics performance to its scientists, supplying high-end specialized SGI hardware for high-performance visualization while fulfilling the requirements of medium and lower performance applications with generic, off-the-shelf components and still maintaining compatibility between the two.

Designing Innovative Lessons Plans to Support the Next Generation Science Standards (NGSS)

Science.gov (United States)

Passow, M. J.

2013-12-01

The Next Generation Science Standards (NGSS) issued earlier in 2013 provide the opportunity to enhance pre-college curricula through a new focus on the ';Big Ideas' in Science, more attention to reading and writing skills needed for college and career readiness, and incorporation of engineering and technology. We introduce a set of lesson plans about scientific ocean drilling which can serve as a exemplars for developing curricula to meet NGSS approaches. Designed for middle and high school students, these can also be utilized in undergraduate courses. Development of these lessons was supported through a grant from the Deep Earth Academy of the Consortium for Ocean Leadership. They will be disseminated through websites of the Deep Earth Academy (http://www.oceanleadership.org/education/deep-earth-academy/) and Earth2Class Workshops for Teachers (http://www.earth2class.org), as well as through workshops at science education conferences sponsored by the National Earth Science Teachers Association (www.nestanet.org) and other organizations. Topics include 'Downhole Logging,' 'Age of the Ocean Floors,' 'Tales of the Resolution,' and 'Continental Shelf Sediments and Climate Change Patterns.' 'Downhole Logging' focuses on the engineering and technology utilized to obtain more information about sediments and rocks cored by the JOIDES Resolution scientific drilling vessel. 'Age of the Ocean Floor' incorporates the GeoMap App visualization tools (http://www.geomapapp.org/) to compare sea bottom materials in various parts of the world. 'Tales of the Resolution' is a series of ';graphic novels' created to describe the scientific discoveries, refitting of the JOIDES Resolution, and variety of careers available in the marine sciences (http://www.ldeo.columbia.edu/BRG/outreach/media/tales/). The fourth lesson focuses on discoveries made during Integrated Ocean Drilling Program Expedition 313, which investigated patterns in the sediments beneath the continental shelf off New

Achromatic hues matching in graphic printing

Directory of Open Access Journals (Sweden)

Martinia Ira Glogar

2015-05-01

Full Text Available Some problems in process of dark achromatic hues reproduction and matching in graphic industry, where requests on colour matching are very high, are discussed. When achromatic hues is concerned, in terms of high requests on colour parameter matching, right on time production, quick response and high quality standards requests, the production and moreover the reproduction is subject to many variables and represent the manufacturing process of high complexity. The aim is to achieve a graphic reproduction with defined colour parameters and remission characteristics as close as possible to a standard. In this paper, black and grey hues characterized with average lightness value L*≤ 20, were analysed. Subjective as well as objective colour evaluation have been performed and results of colour differences obtained by two colour difference formulae, CIELAB and CMC(l:c have been compared.

ASME nuclear codes and standards risk management strategic plan

International Nuclear Information System (INIS)

Balkey, Kenneth R.

2003-01-01

Over the past 15 years, several risk-informed initiatives have been completed or are under development within the ASME Nuclear Codes and Standards organization. In order to better manage the numerous initiatives in the future, the ASME Board on Nuclear Codes and Standards has recently developed and approved a Risk Management Strategic Plan. This paper presents the latest approved version of the plan beginning with a background of applications completed to date, including the recent issuance of the ASME Standard for Probabilistic Risk Assessment (PRA) for Nuclear Power Plant Applications. The paper discusses potential applications within ASME Nuclear Codes and Standards that may require expansion of the PRA Standard, such as for new generation reactors, or the development of new PRA Standards. A long-term vision for the potential development and evolution to a nuclear systems code that adopts a risk-informed approach across a facility life-cycle (design, construction, operation, maintenance, and closure) is summarized. Finally, near term and long term actions are defined across the ASME Nuclear Codes and Standards organizations related to risk management, and related U.S. regulatory activities are also summarized. (author)

Making Graphical Inferences: A Hierarchical Framework

Science.gov (United States)

2004-08-01

from graphs is considered one of the more complex skills graph readers should possess. According to the National Council of Teachers of Mathematics ...understanding graphical perception. Human Computer Interaction, 8, 353-388. NCTM : Standards for Mathematics . (2003, 2003). Pinker, S. (1990). A theory... NCTM ) the simplest type of question involves the extraction or comparison of a few explicitly represented data points (read-offs) ( NCTM : Standards

Applying graphics processor units to Monte Carlo dose calculation in radiation therapy

Directory of Open Access Journals (Sweden)

Bakhtiari M

2010-01-01

Full Text Available We investigate the potential in using of using a graphics processor unit (GPU for Monte-Carlo (MC-based radiation dose calculations. The percent depth dose (PDD of photons in a medium with known absorption and scattering coefficients is computed using a MC simulation running on both a standard CPU and a GPU. We demonstrate that the GPU′s capability for massive parallel processing provides a significant acceleration in the MC calculation, and offers a significant advantage for distributed stochastic simulations on a single computer. Harnessing this potential of GPUs will help in the early adoption of MC for routine planning in a clinical environment.

The Case for Teaching Computer Graphics with WebGL: A 25-Year Perspective.

Science.gov (United States)

Angel, Ed

2017-01-01

OpenGL has been the standard API for teaching computer graphics. There are now multiple versions of the standard, including WebGL. which is the JavaScript implementation of OpenGL ES 2.0. The author argues that WebGL is the version best suited for an introductory course in computer graphics.

The National Shipbuilding Research Program. United States Shipbuilding Standards Master Plan Update

National Research Council Canada - National Science Library

1997-01-01

.... 7. Develop a marketing strategy for the plan. 8. Adopt or convert existing global standards for domestic use. This update includes an updated survey, the SP-6 tactical plan, new windows into standards on the internet, and more.

Decision making in water resource planning: Models and computer graphics

Energy Technology Data Exchange (ETDEWEB)

Fedra, K; Carlsen, A J [ed.

1987-01-01

This paper describes some basic concepts of simulation-based decision support systems for water resources management and the role of symbolic, graphics-based user interfaces. Designed to allow direct and easy access to advanced methods of analysis and decision support for a broad and heterogeneous group of users, these systems combine data base management, system simulation, operations research techniques such as optimization, interactive data analysis, elements of advanced decision technology, and artificial intelligence, with a friendly and conversational, symbolic display oriented user interface. Important features of the interface are the use of several parallel or alternative styles of interaction and display, indlucing colour graphics and natural language. Combining quantitative numerical methods with qualitative and heuristic approaches, and giving the user direct and interactive control over the systems function, human knowledge, experience and judgement are integrated with formal approaches into a tightly coupled man-machine system through an intelligent and easily accessible user interface. 4 drawings, 42 references.

R graphics

CERN Document Server

Murrell, Paul

2005-01-01

R is revolutionizing the world of statistical computing. Powerful, flexible, and best of all free, R is now the program of choice for tens of thousands of statisticians. Destined to become an instant classic, R Graphics presents the first complete, authoritative exposition on the R graphical system. Paul Murrell, widely known as the leading expert on R graphics, has developed an in-depth resource that takes nothing for granted and helps both neophyte and seasoned users master the intricacies of R graphics. After an introductory overview of R graphics facilities, the presentation first focuses

Comparisons of ANS, ASME, AWS, and NFPA standards cited in the NRC standard review plan, NUREG-0800, and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Spiesman, J.B.

1995-11-01

This report provides the results of comparisons of the cited and latest versions of ANS, ASME, AWS and NFPA standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

Standard Measurement & Verification Plan for Lighting Equipment Retrofit or Replacement Projects

Energy Technology Data Exchange (ETDEWEB)

Richman, Eric E.

2009-11-04

This document provides a framework for a standard Measurement and Verification (M&V) plan for lighting projects. It was developed to support cost-effective retrofits (partial and complete replacements) of lighting systems and is intended to provide a foundation for an M&V plan for a lighting retrofit utilizing a "best practice" approach, and to provide guidance to site owners, contractors, and other involved organizations on what is essential for a robust M&V plan for lighting projects. This document provides examples of appropriate elements of an M&V plan, including the calculation of expected energy savings. The standard M&V plan, as provided, also allows for consistent comparison with other similar lighting projects. Although intended for lighting retrofit applications, M&V plans developed per this framework document may also be used for other non-lighting technology retrofits and new installations.

Deadlock Detection Based on Automatic Code Generation from Graphical CSP Models

NARCIS (Netherlands)

Jovanovic, D.S.; Liet, Geert K.; Broenink, Johannes F.; Karelse, F.

2004-01-01

The paper describes a way of using standard formal analysis tools for checking deadlock freedom in graphical models for CSP descriptions of concurrent systems. The models capture specification of a possible concurrent implementation of a system to be realized. Building the graphical models and

Can we be more Graphic about Graphic Design?

OpenAIRE

Vienne, Véronique

2012-01-01

Can you objectify a subjective notion? This is the question graphic designers must face when they talk about their work. Even though graphic design artifacts are omnipresent in our culture, graphic design is still an exceptionally ill-defined profession. This is one of the reasons design criticism is still a rudimentary discipline. No one knows for sure what is this thing we sometimes call “graphic communication” for lack of a better word–a technique my Webster’s dictionary describes as “the ...

Graphical Method for Determining Projectile Trajectory

Science.gov (United States)

Moore, J. C.; Baker, J. C.; Franzel, L.; McMahon, D.; Songer, D.

2010-01-01

We present a nontrigonometric graphical method for predicting the trajectory of a projectile when the angle and initial velocity are known. Students enrolled in a general education conceptual physics course typically have weak backgrounds in trigonometry, making inaccessible the standard analytical calculation of projectile range. Furthermore,…

21 CFR Appendix A to Part 201 - Examples of Graphic Enhancements Used by FDA

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Examples of Graphic Enhancements Used by FDA A... (CONTINUED) DRUGS: GENERAL LABELING Pt. 201, App. A Appendix A to Part 201—Examples of Graphic Enhancements.... Examples of § 201.66 Standard Labeling and Modified Labeling Formats A. Section 201.66 Standard Labeling...

Improving aircraft conceptual design - A PHIGS interactive graphics interface for ACSYNT

Science.gov (United States)

Wampler, S. G.; Myklebust, A.; Jayaram, S.; Gelhausen, P.

1988-01-01

A CAD interface has been created for the 'ACSYNT' aircraft conceptual design code that permits the execution and control of the design process via interactive graphics menus. This CAD interface was coded entirely with the new three-dimensional graphics standard, the Programmer's Hierarchical Interactive Graphics System. The CAD/ACSYNT system is designed for use by state-of-the-art high-speed imaging work stations. Attention is given to the approaches employed in modeling, data storage, and rendering.

Using a graphical programming language to write CAMAC/GPIB instrument drivers

Science.gov (United States)

Zambrana, Horacio; Johanson, William

1991-01-01

To reduce the complexities of conventional programming, graphical software was used in the development of instrumentation drivers. The graphical software provides a standard set of tools (graphical subroutines) which are sufficient to program the most sophisticated CAMAC/GPIB drivers. These tools were used and instrumentation drivers were successfully developed for operating CAMAC/GPIB hardware from two different manufacturers: LeCroy and DSP. The use of these tools is presented for programming a LeCroy A/D Waveform Analyzer.

Innovation Process Planning Model in the Bpmn Standard

Directory of Open Access Journals (Sweden)

Jurczyk-Bunkowska Magdalena

2013-12-01

Full Text Available The aim of the article is to show the relations in the innovation process planning model. The relations argued here guarantee the stable and reliable way to achieve the result in the form of an increased competitiveness by a professionally directed development of the company. The manager needs to specify the effect while initiating the realisation of the process, has to be achieved this by the system of indirect goals. The original model proposed here shows the standard of dependence between the plans of the fragments of the innovation process which make up for achieving its final goal. The relation in the present article was shown by using the standard Business Process Model and Notation. This enabled the specification of interrelations between the decision levels at which subsequent fragments of the innovation process are planned. This gives the possibility of a better coordination of the process, reducing the time needed for the achievement of its effect. The model has been compiled on the basis of the practises followed in Polish companies. It is not, however, the reflection of these practises, but rather an idealised standard of proceedings which aims at improving the effectiveness of the management of innovations on the operational level. The model shown could be the basis of the creation of systems supporting the decision making, supporting the knowledge management or those supporting the communication in the innovation processes.

1:100k Digital Raster Graphic - Collars Removed

Data.gov (United States)

Minnesota Department of Natural Resources — A digital raster graphic (DRG) is a scanned image of an U.S. Geological Survey (USGS) standard series topographic map, including all map collar information. The...

Radiation therapy treatment planning: CT, MR imaging and three-dimensional planning

International Nuclear Information System (INIS)

Lichter, A.S.

1987-01-01

The accuracy and sophistication of radiation therapy treatment planning have increased rapidly in the last decade. Currently, CT-based treatment planning is standard throughout the country. Care must be taken when CT is used for treatment planning because of clear differences between diagnostic scans and scans intended for therapeutic management. The use of CT in radiation therapy planning is discussed and illustrated. MR imaging adds another dimension to treatment planning. The ability to use MR imaging directly in treatment planning involves an additional complex set of capabilities from a treatment planning system. The ability to unwarp the geometrically distorted MR image is a first step. Three-dimensional dose calculations are important to display the dose on sagittal and acoronal sections. The ability to integrate the MR and CT images into a unified radiographic image is critical. CT and MR images are two-dimensional representations of a three-dimensional problem. Through sophisticated computer graphics techniques, radiation therapists are now able to integrate a three-dimensional image of the patient into the treatment planning process. This allows the use of noncoplanar treatment plans and a detailed analysis of tumor and normal tissue anatomy; it is the first step toward a fully conformational treatment planning system. These concepts are illustrated and future research goals outlined

Use of force feedback to enhance graphical user interfaces

Science.gov (United States)

Rosenberg, Louis B.; Brave, Scott

1996-04-01

This project focuses on the use of force feedback sensations to enhance user interaction with standard graphical user interface paradigms. While typical joystick and mouse devices are input-only, force feedback controllers allow physical sensations to be reflected to a user. Tasks that require users to position a cursor on a given target can be enhanced by applying physical forces to the user that aid in targeting. For example, an attractive force field implemented at the location of a graphical icon can greatly facilitate target acquisition and selection of the icon. It has been shown that force feedback can enhance a users ability to perform basic functions within graphical user interfaces.

Critical frameworks for graphic design: graphic design and visual culture

OpenAIRE

Dauppe, Michele-Anne

2011-01-01

The paper considers an approach to the study of graphic design which addresses the expanding nature of graphic design in the 21st century and the purposeful application of theory to the subject of graphic design. In recent years graphic design has expanded its domain from the world of print culture (e.g. books, posters) into what is sometimes called screen culture. Everything from a mobile phone to a display in an airport lounge to the A.T.M. carries graphic design. It has become ever more ub...

36 CFR 223.218 - Consistency with plans, environmental standards, and other management requirements.

Science.gov (United States)

2010-07-01

..., environmental standards, and other management requirements. 223.218 Section 223.218 Parks, Forests, and Public... Special Forest Products § 223.218 Consistency with plans, environmental standards, and other management... with applicable land management plans. Each contract, permit, or other authorizing instrument shall...

Standard Ship Test and Inspection Plan, Procedures and Database

National Research Council Canada - National Science Library

1999-01-01

... construction schedules and increased cost is the area of test and inspection. This project investigates existing rules and regulations for testing and inspection of commercial ships and identifies differences and similarities within the requirements. The results include comparison matrices, a standard test plan, a set of standard test procedures, and a sample test database developed for a typical commercial ship.

Micromagnetic simulations using Graphics Processing Units

International Nuclear Information System (INIS)

Lopez-Diaz, L; Aurelio, D; Torres, L; Martinez, E; Hernandez-Lopez, M A; Gomez, J; Alejos, O; Carpentieri, M; Finocchio, G; Consolo, G

2012-01-01

The methodology for adapting a standard micromagnetic code to run on graphics processing units (GPUs) and exploit the potential for parallel calculations of this platform is discussed. GPMagnet, a general purpose finite-difference GPU-based micromagnetic tool, is used as an example. Speed-up factors of two orders of magnitude can be achieved with GPMagnet with respect to a serial code. This allows for running extensive simulations, nearly inaccessible with a standard micromagnetic solver, at reasonable computational times. (topical review)

5 CFR 891.502 - Standards for carrier of uniform plan.

Science.gov (United States)

2010-01-01

... SERVICE REGULATIONS (CONTINUED) RETIRED FEDERAL EMPLOYEES HEALTH BENEFITS Standards for Uniform Plan and... available, the carrier of the uniform plan shall have made at least 1 percent of all group health insurance benefit payments in the United States. If the carrier is an insurance company, it must be licensed to...

Comparison of Oncentra® Brachy IPSA and graphical optimisation techniques: a case study of HDR brachytherapy head and neck and prostate plans

International Nuclear Information System (INIS)

Jameson, Michael G; Ohanessian, Lucy; Batumalai, Vikneswary; Patel, Virendra; Holloway, Lois C

2015-01-01

There are a number of different dwell positions and time optimisation options available in the Oncentra® Brachy (Elekta Brachytherapy Solutions, Veenendaal, The Netherlands) brachytherapy treatment planning system. The purpose of this case study was to compare graphical (GRO) and inverse planning by simulated annealing (IPSA) optimisation techniques for interstitial head and neck (HN) and prostate plans considering dosimetry, modelled radiobiology outcome and planning time. Four retrospective brachytherapy patients were chosen for this study, two recurrent HN and two prostatic boosts. Manual GRO and IPSA plans were generated for each patient. Plans were compared using dose–volume histograms (DVH) and dose coverage metrics including; conformity index (CI), homogeneity index (HI) and conformity number (CN). Logit and relative seriality models were used to calculate tumour control probability (TCP) and normal tissue complication probability (NTCP). Approximate planning time was also recorded. There was no significant difference between GRO and IPSA in terms of dose metrics with mean CI of 1.30 and 1.57 (P > 0.05) respectively. IPSA achieved an average HN TCP of 0.32 versus 0.12 for GRO while for prostate there was no significant difference. Mean GRO planning times were greater than 75 min while average IPSA planning times were less than 10 min. Planning times for IPSA were greatly reduced compared to GRO and plans were dosimetrically similar. For this reason, IPSA makes for a useful planning tool in HN and prostate brachytherapy

Graphics gems II

CERN Document Server

Arvo, James

1991-01-01

Graphics Gems II is a collection of articles shared by a diverse group of people that reflect ideas and approaches in graphics programming which can benefit other computer graphics programmers.This volume presents techniques for doing well-known graphics operations faster or easier. The book contains chapters devoted to topics on two-dimensional and three-dimensional geometry and algorithms, image processing, frame buffer techniques, and ray tracing techniques. The radiosity approach, matrix techniques, and numerical and programming techniques are likewise discussed.Graphics artists and comput

Topographic Digital Raster Graphics - USGS DIGITAL RASTER GRAPHICS

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — USGS Topographic Digital Raster Graphics downloaded from LABINS (http://data.labins.org/2003/MappingData/drg/drg_stpl83.cfm). A digital raster graphic (DRG) is a...

Measuring Cognitive Load in Test Items: Static Graphics versus Animated Graphics

Science.gov (United States)

Dindar, M.; Kabakçi Yurdakul, I.; Inan Dönmez, F.

2015-01-01

The majority of multimedia learning studies focus on the use of graphics in learning process but very few of them examine the role of graphics in testing students' knowledge. This study investigates the use of static graphics versus animated graphics in a computer-based English achievement test from a cognitive load theory perspective. Three…

Graphics in DAQSIM

International Nuclear Information System (INIS)

Wang, C.C.; Booth, A.W.; Chen, Y.M.; Botlo, M.

1993-06-01

At the Superconducting Super Collider Laboratory (SSCL) a tool called DAQSIM has been developed to study the behavior of Data Acquisition (DAQ) systems. This paper reports and discusses the graphics used in DAQSIM. DAQSIM graphics includes graphical user interface (GUI), animation, debugging, and control facilities. DAQSIM graphics not only provides a convenient DAQ simulation environment, it also serves as an efficient manager in simulation development and verification

Patient Communication, Satisfaction, and Trust Before and After Use of a Standardized Birth Plan.

Science.gov (United States)

Anderson, Clare-Marie; Monardo, Rosie; Soon, Reni; Lum, Jennifer; Tschann, Mary; Kaneshiro, Bliss

2017-11-01

The birth plan was developed as a way for pregnant women to communicate their desires and expectations for labor and delivery. Standardized birth plans have been used by some birth facilities as a communication tool. In this quality improvement project, we sought to describe communication, trust, and satisfaction scores after delivery in a group of patients who used a standardized birth plan. All pregnant women at 24 or more weeks of gestation were asked to complete a short, standardized birth plan. Communication, trust, and satisfaction were assessed before and after delivery. Descriptive analyses showed that communication, trust, and satisfaction scores were high following delivery. Scores for all three factors increased significantly following delivery though increases were modest. Most patients (84%) indicated they would use a birth plan with a subsequent delivery.

[Hardware for graphics systems].

Science.gov (United States)

Goetz, C

1991-02-01

In all personal computer applications, be it for private or professional use, the decision of which "brand" of computer to buy is of central importance. In the USA Apple computers are mainly used in universities, while in Europe computers of the so-called "industry standard" by IBM (or clones thereof) have been increasingly used for many years. Independently of any brand name considerations, the computer components purchased must meet the current (and projected) needs of the user. Graphic capabilities and standards, processor speed, the use of co-processors, as well as input and output devices such as "mouse", printers and scanners are discussed. This overview is meant to serve as a decision aid. Potential users are given a short but detailed summary of current technical features.

Hybrid compression of video with graphics in DTV communication systems

OpenAIRE

Schaar, van der, M.; With, de, P.H.N.

2000-01-01

Advanced broadcast manipulation of TV sequences and enhanced user interfaces for TV systems have resulted in an increased amount of pre- and post-editing of video sequences, where graphical information is inserted. However, in the current broadcasting chain, there are no provisions for enabling an efficient transmission/storage of these mixed video and graphics signals and, at this emerging stage of DTV systems, introducing new standards is not desired. Nevertheless, in the professional video...

Graphics and control for in-reactor operations

International Nuclear Information System (INIS)

Smith, A.L.

1996-01-01

A wide range of manipulator systems has been developed to carry out remotely operated inspection, repair and maintenance tasks at the Magnox reactors in the United Kingdom. A key factor in the improvement of these systems in recent years has been the extensive use of computer graphics as a real-time aid to the manipulator operator. This is exemplified by the reactor pressure vessel inspection work at the Bradwell reactor which is described in detail. The graphics sub-system of the control system for the manipulator plays a unique and wide-ranging role. The 3D modelling and simulation capability of the IGRIP software has contributed to the conceptual design, detailed path planning, rehearsal support, public relations, real-time manipulator display, post inspection documentation and quality assurance. (UK)

An Overview of Fiduciary Standards and Suitability for Financial Planning Students

Science.gov (United States)

Chong, James T.; Jennings, Penelope R.; Phillips, G. Michael

2015-01-01

Financial planning is an interdisciplinary field including finance and business law topics. Consequently, standard pedagogical resources often omit topics that fall between these fields. To address a key gap in educational materials for financial planning students and faculty, this article reviews recent regulatory developments for financial…

Setting standards for planning off duty and audit of practice.

Science.gov (United States)

Walker, Linda; Minchin, Anne; Pickard, Jane

The off duty or rostering system is an important part of managing any ward or department. This article looks at the issues that need to be considered when drawing up and managing off duty. It recommends standards for off-duty planning and shares the results of an audit carried out against some of these standards in one NHS trust.

Concurrent use of data base and graphics computer workstations to provide graphic access to large, complex data bases for robotics control of nuclear surveillance and maintenance

International Nuclear Information System (INIS)

Dalton, G.R.; Tulenko, J.S.; Zhou, X.

1990-01-01

The University of Florida is part of a multiuniversity research effort, sponsored by the US Department of Energy which is under way to develop and deploy an advanced semi-autonomous robotic system for use in nuclear power stations. This paper reports on the development of the computer tools necessary to gain convenient graphic access to the intelligence implicit in a large complex data base such as that in a nuclear reactor plant. This program is integrated as a man/machine interface within the larger context of the total computerized robotic planning and control system. The portion of the project described here addresses the connection between the three-dimensional displays on an interactive graphic workstation and a data-base computer running a large data-base server program. Programming the two computers to work together to accept graphic queries and return answers on the graphic workstation is a key part of the interactive capability developed

SCALE Graphical Developments for Improved Criticality Safety Analyses

International Nuclear Information System (INIS)

Barnett, D.L.; Bowman, S.M.; Horwedel, J.E.; Petrie, L.M.

1999-01-01

New computer graphic developments at Oak Ridge National Ridge National Laboratory (ORNL) are being used to provide visualization of criticality safety models and calculational results as well as tools for criticality safety analysis input preparation. The purpose of this paper is to present the status of current development efforts to continue to enhance the SCALE (Standardized Computer Analyses for Licensing Evaluations) computer software system. Applications for criticality safety analysis in the areas of 3-D model visualization, input preparation and execution via a graphical user interface (GUI), and two-dimensional (2-D) plotting of results are discussed

Bayesian Graphical Models

DEFF Research Database (Denmark)

Jensen, Finn Verner; Nielsen, Thomas Dyhre

2016-01-01

Mathematically, a Bayesian graphical model is a compact representation of the joint probability distribution for a set of variables. The most frequently used type of Bayesian graphical models are Bayesian networks. The structural part of a Bayesian graphical model is a graph consisting of nodes...

PC Graphic file programing

International Nuclear Information System (INIS)

Yang, Jin Seok

1993-04-01

This book gives description of basic of graphic knowledge and understanding and realization of graphic file form. The first part deals with graphic with graphic data, store of graphic data and compress of data, programing language such as assembling, stack, compile and link of program and practice and debugging. The next part mentions graphic file form such as Mac paint file, GEM/IMG file, PCX file, GIF file, and TIFF file, consideration of hardware like mono screen driver and color screen driver in high speed, basic conception of dithering and conversion of formality.

Standard Review Plan for Environmental Restoration Program Quality Management Plans

International Nuclear Information System (INIS)

1993-12-01

The Department of Energy, Richland Operations Office (RL) Manual Environmental Restoration Program Quality System Requirements (QSR) for the Hanford Site, defines all quality requirements governing Hanford Environmental Restoration (ER) Program activities. The QSR requires that ER Program participants develop Quality Management Plans (QMPs) that describe how the QSR requirements will be implemented for their assigned scopes of work. This standard review plan (SRP) describes the ER program participant responsibilities for submittal of QMPs to the RL Environmental Restoration Division for review and the RL methodology for performing the reviews of participant QMPS. The SRP serves the following functions: acts as a guide in the development or revision of QMPs to assure that the content is complete and adequate; acts as a checklist to be used by the RL staff in their review of participant QMPs; acts as an index or matrix between the requirements of the QSR and implementing methodologies described in the QMPs; decreases the time and subjectivity of document reviews; and provides a formal, documented method for describing exceptions, modifications, or waivers to established ER Program quality requirements

Is There a Difference in Cost Between Standard and Virtual Surgical Planning for Orthognathic Surgery?

Science.gov (United States)

Resnick, Cory M; Inverso, Gino; Wrzosek, Mariusz; Padwa, Bonnie L; Kaban, Leonard B; Peacock, Zachary S

2016-09-01

Virtual surgical planning (VSP) and 3-dimensional printing of surgical splints are becoming the standard of care for orthognathic surgery, but costs have not been thoroughly evaluated. The purpose of this study was to compare the cost of VSP and 3-dimensional printing of splints ("VSP") versus that of 2-dimensional cephalometric evaluation, model surgery, and manual splint fabrication ("standard planning"). This is a retrospective cohort study including patients planned for bimaxillary surgery from January 2014 to January 2015 at Massachusetts General Hospital. Patients were divided into 3 groups by case type: symmetric, nonsegmental (group 1); asymmetric (group 2); and segmental (group 3). All cases underwent both VSP and standard planning with times for all activities recorded. The primary and secondary predictor variables were method of treatment planning and case type, respectively. Time-driven activity-based micro-costing analysis was used to quantify the differences in cost. Results were analyzed using a paired t test and analysis of variance. The sample included 43 patients (19 in group 1, 17 in group 2, and 7 in group 3). The average times and costs were 194 ± 14.1 minutes and $2,765.94, respectively, for VSP and 540.9 ± 99.5 minutes and $3,519.18, respectively, for standard planning. For the symmetric, nonsegmental group, the average times and costs were 188 ± 17.8 minutes and $2,700.52, respectively, for VSP and 524.4 ± 86.1 minutes and $3,380.17, respectively, for standard planning. For the asymmetric group, the average times and costs were 187.4 ± 10.9 minutes and $2,713.69, respectively, for VSP and 556.1 ± 94.1 minutes and $3,640.00, respectively, for standard planning. For the segmental group, the average times and costs were 208.8 ± 13.5 minutes and $2,883.62, respectively, for VSP and 542.3 ± 118.4 minutes and $3,537.37, respectively, for standard planning. All time and cost differences were statistically significant (P

Full Monte Carlo-Based Biologic Treatment Plan Optimization System for Intensity Modulated Carbon Ion Therapy on Graphics Processing Unit.

Science.gov (United States)

Qin, Nan; Shen, Chenyang; Tsai, Min-Yu; Pinto, Marco; Tian, Zhen; Dedes, Georgios; Pompos, Arnold; Jiang, Steve B; Parodi, Katia; Jia, Xun

2018-01-01

One of the major benefits of carbon ion therapy is enhanced biological effectiveness at the Bragg peak region. For intensity modulated carbon ion therapy (IMCT), it is desirable to use Monte Carlo (MC) methods to compute the properties of each pencil beam spot for treatment planning, because of their accuracy in modeling physics processes and estimating biological effects. We previously developed goCMC, a graphics processing unit (GPU)-oriented MC engine for carbon ion therapy. The purpose of the present study was to build a biological treatment plan optimization system using goCMC. The repair-misrepair-fixation model was implemented to compute the spatial distribution of linear-quadratic model parameters for each spot. A treatment plan optimization module was developed to minimize the difference between the prescribed and actual biological effect. We used a gradient-based algorithm to solve the optimization problem. The system was embedded in the Varian Eclipse treatment planning system under a client-server architecture to achieve a user-friendly planning environment. We tested the system with a 1-dimensional homogeneous water case and 3 3-dimensional patient cases. Our system generated treatment plans with biological spread-out Bragg peaks covering the targeted regions and sparing critical structures. Using 4 NVidia GTX 1080 GPUs, the total computation time, including spot simulation, optimization, and final dose calculation, was 0.6 hour for the prostate case (8282 spots), 0.2 hour for the pancreas case (3795 spots), and 0.3 hour for the brain case (6724 spots). The computation time was dominated by MC spot simulation. We built a biological treatment plan optimization system for IMCT that performs simulations using a fast MC engine, goCMC. To the best of our knowledge, this is the first time that full MC-based IMCT inverse planning has been achieved in a clinically viable time frame. Copyright © 2017 Elsevier Inc. All rights reserved.

Retirement plan participation and features and standard of living of Americans 55 or older.

Science.gov (United States)

Copeland, Craig

2002-08-01

This Issue Brief is the third in a series of Employee Benefit Research Institute (EBRI) publications based on data collected in 1998 and released in 2002 as the Retirement and Pension Plan Coverage Topical Module of the 1996 Survey of Income and Program Participation (SIPP). This report completes the series by examining the survey's more detailed questions concerning workers' employment-based retirement plans. Specifically, it examines the percentage of workers who are participating in a plan, and also workers' reasons for not participating in a plan when working in a job where a plan is sponsored; the features of, or decisions made concerning salary reduction plans; historical participation in employment-based retirement plans; and a comparison of the standard of living of individuals age 55 or older with their living standard in their early 50s. As of June 1998, 64.3 percent of wage and salary workers age 16 or older worked for an employer or union that sponsored any type of retirement plan (defined contribution or defined benefit) for any of its employees or members (the "sponsorship rate"). Almost 47 percent of these wage and salary workers participated in a plan (the "participation rate"), with 43.2 percent being entitled to a benefit or eligible to receive a lump-sum distribution from a plan if their job terminated at the time of survey (the "vested rate"). The predominant reason for choosing not to participate in a retirement plan was that doing so was unaffordable. The eligible participation rate for salary reduction plans was 81.4 percent. Fifty-six percent of all workers have participated in some type of retirement plan sometime during their work life through 1998. For those ages 51-60, almost 72 percent have ever participated in a plan. The median account balance in salary reduction plans in 1998 was $14,000. In 1998, 12.9 percent of salary reduction plan participants eligible to take a loan had done so, and the average outstanding loan balance was $5

On the Role of Computer Graphics in Engineering Design Graphics Courses.

Science.gov (United States)

Pleck, Michael H.

The implementation of two- and three-dimensional computer graphics in a freshmen engineering design course at the university level is described. An assessment of the capabilities and limitations of computer graphics is made, along with a presentation of the fundamental role which computer graphics plays in engineering design instruction.…

'Grafic'. A subroutine for the graphic displays

International Nuclear Information System (INIS)

Yunta Carretero, J.

1977-01-01

The subroutire Grafic allows the drawing of different standard graphics in a pploter Calcomp and avoid the users the preparation of calls to several Plot subroutines, which are necessary for the plotting. The possibilities of this subroutine, user's guide, suggestions about better use and examples, and also the carry out in Fortran language, are described. (author) [es

The PC graphics handbook

CERN Document Server

Sanchez, Julio

2003-01-01

Part I - Graphics Fundamentals PC GRAPHICS OVERVIEW History and Evolution Short History of PC Video PS/2 Video Systems SuperVGA Graphics Coprocessors and Accelerators Graphics Applications State-of-the-Art in PC Graphics 3D Application Programming Interfaces POLYGONAL MODELING Vector and Raster Data Coordinate Systems Modeling with Polygons IMAGE TRANSFORMATIONS Matrix-based Representations Matrix Arithmetic 3D Transformations PROGRAMMING MATRIX TRANSFORMATIONS Numeric Data in Matrix Form Array Processing PROJECTIONS AND RENDERING Perspective The Rendering Pipeline LIGHTING AND SHADING Lightin

Standard Review Plan Update and Development Program

International Nuclear Information System (INIS)

1992-05-01

This implementing procedures document (IPD) was prepared for use in implementing tasks under the standard review plan update and development program (SRP-UDP). The IPD provides comprehensive guidance and detailed procedures for SRP-UDP tasks. The IPD is mandatory for contractors performing work for the SRP-UDP. It is guidance for the staff. At the completion of the SRP-UDP, the IPD will be revised (to remove the UDP aspects) and will replace NRR Office Letter No. 800 as long-term maintenance procedures

Standard Review Plan Update and Development Program

Energy Technology Data Exchange (ETDEWEB)

1992-05-01

This implementing procedures document (IPD) was prepared for use in implementing tasks under the standard review plan update and development program (SRP-UDP). The IPD provides comprehensive guidance and detailed procedures for SRP-UDP tasks. The IPD is mandatory for contractors performing work for the SRP-UDP. It is guidance for the staff. At the completion of the SRP-UDP, the IPD will be revised (to remove the UDP aspects) and will replace NRR Office Letter No. 800 as long-term maintenance procedures.

Graphical Models with R

DEFF Research Database (Denmark)

Højsgaard, Søren; Edwards, David; Lauritzen, Steffen

Graphical models in their modern form have been around since the late 1970s and appear today in many areas of the sciences. Along with the ongoing developments of graphical models, a number of different graphical modeling software programs have been written over the years. In recent years many...... of these software developments have taken place within the R community, either in the form of new packages or by providing an R ingerface to existing software. This book attempts to give the reader a gentle introduction to graphical modeling using R and the main features of some of these packages. In addition......, the book provides examples of how more advanced aspects of graphical modeling can be represented and handled within R. Topics covered in the seven chapters include graphical models for contingency tables, Gaussian and mixed graphical models, Bayesian networks and modeling high dimensional data...

77 FR 53884 - Automatic Underfrequency Load Shedding and Load Shedding Plans Reliability Standards; Notice of...

Science.gov (United States)

2012-09-04

... Underfrequency Load Shedding and Load Shedding Plans Reliability Standards; Notice of Compliance Filing Take notice that on August 9, 2012, North American Electric Reliability Corporation submitted a compliance... Load Shedding Plans Reliability Standards, 139 FERC ] 61,098, (Order No. 763) (2012). Any person...

The Graphical Representation of the Digital Astronaut Physiology Backbone

Science.gov (United States)

Briers, Demarcus

2010-01-01

This report summarizes my internship project with the NASA Digital Astronaut Project to analyze the Digital Astronaut (DA) physiology backbone model. The Digital Astronaut Project (DAP) applies integrated physiology models to support space biomedical operations, and to assist NASA researchers in closing knowledge gaps related to human physiologic responses to space flight. The DA physiology backbone is a set of integrated physiological equations and functions that model the interacting systems of the human body. The current release of the model is HumMod (Human Model) version 1.5 and was developed over forty years at the University of Mississippi Medical Center (UMMC). The physiology equations and functions are scripted in an XML schema specifically designed for physiology modeling by Dr. Thomas G. Coleman at UMMC. Currently it is difficult to examine the physiology backbone without being knowledgeable of the XML schema. While investigating and documenting the tags and algorithms used in the XML schema, I proposed a standard methodology for a graphical representation. This standard methodology may be used to transcribe graphical representations from the DA physiology backbone. In turn, the graphical representations can allow examination of the physiological functions and equations without the need to be familiar with the computer programming languages or markup languages used by DA modeling software.

Graphical representation of covariant-contravariant modal formulae

Directory of Open Access Journals (Sweden)

Miguel Palomino

2011-08-01

Full Text Available Covariant-contravariant simulation is a combination of standard (covariant simulation, its contravariant counterpart and bisimulation. We have previously studied its logical characterization by means of the covariant-contravariant modal logic. Moreover, we have investigated the relationships between this model and that of modal transition systems, where two kinds of transitions (the so-called may and must transitions were combined in order to obtain a simple framework to express a notion of refinement over state-transition models. In a classic paper, Boudol and Larsen established a precise connection between the graphical approach, by means of modal transition systems, and the logical approach, based on Hennessy-Milner logic without negation, to system specification. They obtained a (graphical representation theorem proving that a formula can be represented by a term if, and only if, it is consistent and prime. We show in this paper that the formulae from the covariant-contravariant modal logic that admit a "graphical" representation by means of processes, modulo the covariant-contravariant simulation preorder, are also the consistent and prime ones. In order to obtain the desired graphical representation result, we first restrict ourselves to the case of covariant-contravariant systems without bivariant actions. Bivariant actions can be incorporated later by means of an encoding that splits each bivariant action into its covariant and its contravariant parts.

The use of computer graphics to assist in-reactor operations

International Nuclear Information System (INIS)

Smith, A.L.

1995-01-01

A number of complex inspection and repair tasks have been carried out inside Nuclear Electric's gas cooled reactors using multi-link manipulators. The paper describes how computer graphics are integrated into the manipulator system and perform a key role during many phases of a project. Graphics simulation is used to assist with conceptual design, detailed path planning, rehearsals, quality assurance, demonstrations and, critically, as an on-line tool to assist the real-time operation of the equipment whilst performing complex in-reactor tasks. The techniques used are illustrated by recent examples of use to assist the inspection and repair of in-reactor components. (Author)

ElectroEncephaloGraphics: Making waves in computer graphics research.

Science.gov (United States)

Mustafa, Maryam; Magnor, Marcus

2014-01-01

Electroencephalography (EEG) is a novel modality for investigating perceptual graphics problems. Until recently, EEG has predominantly been used for clinical diagnosis, in psychology, and by the brain-computer-interface community. Researchers are extending it to help understand the perception of visual output from graphics applications and to create approaches based on direct neural feedback. Researchers have applied EEG to graphics to determine perceived image and video quality by detecting typical rendering artifacts, to evaluate visualization effectiveness by calculating the cognitive load, and to automatically optimize rendering parameters for images and videos on the basis of implicit neural feedback.

Intelligent robot action planning

Energy Technology Data Exchange (ETDEWEB)

Vamos, T; Siegler, A

1982-01-01

Action planning methods used in intelligent robot control are discussed. Planning is accomplished through environment understanding, environment representation, task understanding and planning, motion analysis and man-machine communication. These fields are analysed in detail. The frames of an intelligent motion planning system are presented. Graphic simulation of the robot's environment and motion is used to support the planning. 14 references.

Archaeological Vector Graphics and SVG: A case study from Cricklade

Directory of Open Access Journals (Sweden)

Holly Wright

2006-07-01

Full Text Available Currently, there are a variety of ways to make vector-based information available on the Web, but most are browser- and platform-dependent, proprietary, and unevenly supported (Laaker 2002, 13. Of the various solutions currently being explored by the greater Web community, one of the most promising is called Scalable Vector Graphics (SVG, which is part of the eXtensible Markup Language (XML. SVG was defined by a working group of the World Wide Web Consortium (W3C and has subsequently become their official recommendation for representing vector graphics on the Web in XML (Eisenberg 2002, 6; Watt 2002, xviii. Because SVG is an XML application, it is freely available, not dependent on a particular browser or platform, and interoperable with other XML applications. While there is no guarantee that SVG will be widely adopted for rendering vector-based information on the Web, development and recommendation by the W3C generally carries a great deal of weight, especially as browser developers move towards less proprietary support of W3C standards. In addition, use of XML continues to grow, so XML-based solutions like SVG should be explored by those interested in presenting vector graphics on the Web (Harold and Means 2002, 3. This discussion explores SVG as a potential tool for archaeologists. It includes some of the ways vector graphics are used in archaeology, and outlines the development and features of SVG, which are then demonstrated in the form of a case study. Large-scale plan and section drawings originally created on Permatrace were digitised by Guy Hopkinson for use in the Internet Archaeology publication Excavations at Cricklade, Wiltshire, 1975, by Jeremy Haslam, designed as an exercise in 'retrospective publication', to illustrate how traditional forms of visual recording might be digitised for online publication. Hopkinson went on to publish his methodology jointly with Internet Archaeology editor, Judith Winters in Problems with

MAPA: Implementation of the Standard Interchange Format and use for analyzing lattices

Science.gov (United States)

Shasharina, Svetlana G.; Cary, John R.

1997-05-01

MAPA (Modular Accelerator Physics Analysis) is an object oriented application for accelerator design and analysis with a Motif based graphical user interface. MAPA has been ported to AIX, Linux, HPUX, Solaris, and IRIX. MAPA provides an intuitive environment for accelerator study and design. The user can bring up windows for fully nonlinear analysis of accelerator lattices in any number of dimensions. The current graphical analysis methods of Lifetime plots and Surfaces of Section have been used to analyze the improved lattice designs of Wan, Cary, and Shasharina (this conference). MAPA can now read and write Standard Interchange Format (MAD) accelerator description files and it has a general graphical user interface for adding, changing, and deleting elements. MAPA's consistency checks prevent deletion of used elements and prevent creation of recursive beam lines. Plans include development of a richer set of modeling tools and the ability to invoke existing modeling codes through the MAPA interface. MAPA will be demonstrated on a Pentium 150 laptop running Linux.

Customizing graphical user interface technology for spacecraft control centers

Science.gov (United States)

Beach, Edward; Giancola, Peter; Gibson, Steven; Mahmot, Ronald

1993-01-01

The Transportable Payload Operations Control Center (TPOCC) project is applying the latest in graphical user interface technology to the spacecraft control center environment. This project of the Mission Operations Division's (MOD) Control Center Systems Branch (CCSB) at NASA Goddard Space Flight Center (GSFC) has developed an architecture for control centers which makes use of a distributed processing approach and the latest in Unix workstation technology. The TPOCC project is committed to following industry standards and using commercial off-the-shelf (COTS) hardware and software components wherever possible to reduce development costs and to improve operational support. TPOCC's most successful use of commercial software products and standards has been in the development of its graphical user interface. This paper describes TPOCC's successful use and customization of four separate layers of commercial software products to create a flexible and powerful user interface that is uniquely suited to spacecraft monitoring and control.

Plots, Calculations and Graphics Tools (PCG2). Software Transfer Request Presentation

Science.gov (United States)

Richardson, Marilou R.

2010-01-01

This slide presentation reviews the development of the Plots, Calculations and Graphics Tools (PCG2) system. PCG2 is an easy to use tool that provides a single user interface to view data in a pictorial, tabular or graphical format. It allows the user to view the same display and data in the Control Room, engineering office area, or remote sites. PCG2 supports extensive and regular engineering needs that are both planned and unplanned and it supports the ability to compare, contrast and perform ad hoc data mining over the entire domain of a program's test data.

Planning and User Interface Affordances

National Research Council Canada - National Science Library

St. Amant, Robert

1999-01-01

.... We identify a number of similarities between executing plans and interacting with a graphical user interface, and argue that affordances for planning environments apply equally well to user interface environments...

Standardization of a Graphic Symbol System as an Alternative Communication Tool for Turkish

Science.gov (United States)

Karal, Yasemin; Karal, Hasan; Silbir, Lokman; Altun, Taner

2016-01-01

Graphic symbols are commonly used across countries in order to support individuals with communicative deficiency. The literature review revealed the absence of such a system for Turkish socio-cultural context. In this study, the aim was to develop a symbol system appropriate for the Turkish socio-cultural context. The process began with studies…

Practical application of computer graphics in nuclear power plant engineering

International Nuclear Information System (INIS)

Machiba, Hiroshi; Kawamura, Hirobumi; Sasaki, Norio

1992-01-01

A nuclear power plant is composed of a vast amount of equipment, piping, and so on, and six or seven years are required to complete the design and engineering from the initial planning stage to the time of commercial operation. Furthermore, operating plants must be continually maintained and improved for a long period. Computer graphics were first applied to the composite arrangement design of nuclear power plants in the form of 3-dimensional CAD. Subsequently, as the introduction of CAE has progressed, a huge assortment of information has been accumulated in database, and measures have been sought that would permit the convenient utilization of this information. Using computer graphics technologies, improvement of the interface between the user and such databases has recently been accomplished. In response to the growth in environmental consciousness, photo-realistic simulations for artistic design of the interior and overviews showing harmony with the surroundings have been achieved through the application of computer graphics. (author)

Graphic Storytelling

Science.gov (United States)

Thompson, John

2009-01-01

Graphic storytelling is a medium that allows students to make and share stories, while developing their art communication skills. American comics today are more varied in genre, approach, and audience than ever before. When considering the impact of Japanese manga on the youth, graphic storytelling emerges as a powerful player in pop culture. In…

SRS ES and H Standards Compliance Program Implementation Plan

International Nuclear Information System (INIS)

Hearn, W.H.

1993-01-01

On March 8, 1990, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 90-2 to the Secretary of Energy. This recommendation, based upon the DNFSB's initial review and evaluation of the content and implementation of standards relating to the design, construction, operations, and decommissioning of defense nuclear facilities of the U.S. Department of Energy (DOE), called for three actions: identification of specific standards that apply to design, construction, operation and decommissioning of DOE facilities; assessment of the adequacy of those standards for protecting public health and safety; and determination of the extent to which they have and are being implemented. The purpose of this Implementation Plan is to define the single program for all sitewide and facility 90-2 ES and H Standards Compliance efforts, which will satisfy the HQ Implementation Plan, avoid duplicate efforts, be as simple and achievable as possible, include cost-saving innovations, use a graded approach based on facility hazards and future needs of facilities, and support configuration control for facility requirements. The Defense Waste Processing Facility (DWPF) has been designated a pilot facility for the 90-2 program and has progressed with their facility program ahead of the site-level program. The DWPF, and other Government-Owned Contractor-Operated (GOCO) facilities that progress on an enhanced schedule, will serve as pilot facilities for the site-level program. The lessons learned with their requirement identifications, and their assessments of the adequacy of and their compliance with these requirements will be used to improve the efficiency of the site-level and subsequent programs

A Theoretical Analysis of Learning with Graphics--Implications for Computer Graphics Design.

Science.gov (United States)

ChanLin, Lih-Juan

This paper reviews the literature pertinent to learning with graphics. The dual coding theory provides explanation about how graphics are stored and precessed in semantic memory. The level of processing theory suggests how graphics can be employed in learning to encourage deeper processing. In addition to dual coding theory and level of processing…

Standard review plan for the review of environmental restoration remedial action quality assurance program plans

International Nuclear Information System (INIS)

1991-09-01

This plan establishes both the scope of the review and the acceptance criteria to be utilized for the review of Quality Assurance Program Plans (QAPPs) developed in accordance with the requirements of DOE/RL-90-28. DOE/RL-90-28, the Environmental Restoration Remedial Action Quality Assurance Requirements Document (QARD) defines all quality assurance (QA) requirements governing activities that affect the quality of the Environmental Restoration Remedial Action (ERRA) program at the Hanford Site. These requirements are defined in three parts, Part 1 of Quality Management and Administration tasks, Part 2 for Environmental Data Operations, and Part 3 of the Design and Construction of items, systems, and facilities. The purpose of this document is to identify the scope of the review by the DOE Field Office, Richland staff, and establish the acceptance criteria (Parts 1, 2, and 3) that the DOE Field Office, Richland staff will utilize to evaluate the participant QAPPs. Use of the standard review plan will (1) help ensure that participant QAPPs contain the information required by DOE/RL-90-28, (2) aid program participant and DOE Field Office, Richland staff is ensuring that the information describing the participant's QAPP is complete, (3) help persons regarding DOE/RL- 90-28 to locate information, and (4) contribute to decreasing the time needed for the review process. In addition, the Standard Review Plan (SRP) ensures the quality and uniformity of the staff reviews and presents a well-defined base from which to evaluate compliance of participant quality programs against DOE/RL-90-28

Developing the (ASTM) voluntary consensus standards required to help implement the National Energy Plan

International Nuclear Information System (INIS)

Anon.

1981-01-01

The recommended guide is the first American Society for Testing and Materials (ASTM) matrix in a family of such documents that combined, will help manage the development of the ASTM standards considered necessary to implement the current National Plan for Energy Research, Development, and Demonstration. It is expected that the guide will provide a framework for standards development to complement the nation's research and development in support of critical energy needs. The recommended guide identifies the energy-critical areas that are to be developed, the master ASTM recommended guide for developing the standards required to help the National Plan, the section in which each energy-critical area is covered, and the suggested ASTM lead committee responsible for each area (fossil, solar, geothermal, conservation, fusion, and fission reactor development). A comprehensive matrix to identify the areas of need for which ASTM standards will be required to help implement the National Energy Plan is also presented

Graphic correlation of the Frasnian Upper Devonian Composite

Energy Technology Data Exchange (ETDEWEB)

Klapper, G. (Univ. of Iowa, Iowa City, IA (United States). Dept. of Geology); Kirchgasser, W.T. (Potsdam Coll., NY (United States). Geology Dept.); Baesemann, J.F. (Amoco Production Co., Houston, TX (United States))

1993-03-01

Although statistical solution to the line of correlation (LOC) was advocated by Shaw (1964) when the technique of graphic correlation was introduced, most practioners, including Shaw himself shortly after publication of Time in Stratigraphy, agree that statistical methods for locating the LOC are inappropriate. As a consequence, calculation of the standard error of estimate and other statistical measures of error in order to quantify the resolution of graphic correlation is also inappropriate. Methods for locating the LOC are diverse involving geologic as well as biostratigraphic knowledge, and include positioning it with respect to magnetic reversals, volcanic ash beds, oxygen isotope data, and splitting bases and tops of species so as to cause minimum disruption in known ranges. The LOC for each section with the Composite Standard is a testable hypothesis of stratigraphic correlation. The Frasnian Composite consists of 27 sections in the Montagne Noire (southern France), Alberta Rockies, Hay River - Trout River areas of the Northwest Territories, Canada, the Midcontinent and New York sequences in the US, the Canning Basin, Western Australia, and the Central Devonian Field and Timan-Pechora Basin of the Russian Platform. Through graphic correlation, the Frasnian Stage is divided into 34 composite standard units, using ranges of conodonts and to a lesser extent goniatites. The resulting subdivision is considerably more precise than that achieved by the conventional thirteen-fold zonation based on the Montagne Noire conodont sequence, many zones of which have been replicated in the cited areas outside the Montagne Noire. The Frasnian Composite successfully provides a precise intrazonal method of correlation that uses the ranges of all species from the studies sections in a single biostratigraphic framework, rather than emphasizing a few zonal indices.

Graphic Turbulence Guidance

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Forecast turbulence hazards identified by the Graphical Turbulence Guidance algorithm. The Graphical Turbulence Guidance product depicts mid-level and upper-level...

Graphic Presentation: An Empirical Examination of the Graphic Novel Approach to Communicate Business Concepts

Science.gov (United States)

Short, Jeremy C.; Randolph-Seng, Brandon; McKenny, Aaron F.

2013-01-01

Graphic novels have been increasingly incorporated into business communication forums. Despite potential benefits, little research has examined the merits of the graphic novel approach. In response, we engage in a two-study approach. Study 1 explores the potential of graphic novels to affect learning outcomes and finds that the graphic novel was…

Design of Graphic Aggregation Model for Evaluation of Energy Systems

International Nuclear Information System (INIS)

An, Sang Ha; Jeong, Yong Hoon; Chang, Won Joon; Chang, Soon Heung; Kim, Sung Ho; Kim, Tae Woon

2006-01-01

Korea is meeting the growing electric power needs by mix of nuclear, fossil, hydro energy and so on. But we can not depend on fossil energy forever, and the people's concern about environment has been changed. So it is time to plan future energy mix considering multiple parameters such as economics, environment, social, energy security, etc. A multiple aggregation model has been used for decision making process in which multiple variables should be considered like energy mix. In this context, we designed Graphic Aggregation Model for Evaluation of energy systems (GAME) for the dynamic analysis of decision on the energy systems. It can support Analytic Hierarchy Process (AHP) analysis based on Graphic User Interface

THE USING OF GRAPHICAL EDITOR IN THE ENGINEERING GRAPHICS AND THE COURSE DESIGNING

Directory of Open Access Journals (Sweden)

KARPYUK L. V.

2016-08-01

Full Text Available The problems of learning students of the engineering and computer graphics of the course on the base of computer-aided design (CAD were described in the article. The examples of training tasks for acquiring knowledge of work in the environment of graphical editor of AutoCAD were shown. These examples are needed to perform drawings on The Engineering Graphics, and also for a graphic part of Course Projects for students of mechanical specialties.

Functional information technology in geometry-graphic training of engineers

Directory of Open Access Journals (Sweden)

Irina D. Stolbova

2017-01-01

Full Text Available In the last decade, information technology fundamentally changed the design activity and made significant adjustments to the development of design documentation. Electronic drawings and 3d-models appeared instead of paper drawings and the traditional form of the design documentation. Geometric modeling of 3d-technology has replaced the graphic design technology. Standards on the electronic models are introduced. Electronic prototypes and 3d-printing contribute to the spread of rapid prototyping technologies.In these conditions, the task to find the new learning technology, corresponding to the level of development of information technologies and meeting the requirements of modern design and manufacturing technologies, comes to the fore. The purpose of this paper — the analysis of the information technology capabilities in the formation of geometrical-graphic competences, happening in the base of graphic training of students of technical university. Traditionally, basic graphic training of students in the junior university courses consisted in consecutive studying of the descriptive geometry, engineering and computer graphics. Today, the use of integrative approach is relevant, but the role of computer graphics varies considerably. It is not only an object of study, but also a learning tool, the core base of graphic training of students. Computer graphics is an efficient mechanism for the development of students’ spatial thinking. The role of instrumental training of students to the wide use of CAD-systems increases in the solution of educational problems and in the implementation of project tasks, which corresponds to the modern requirements of the professional work of the designer-constructor.In this paper, the following methods are used: system analysis, synthesis, simulation.General geometric-graphic training model of students of innovation orientation, based on the use of a wide range of computer technology is developed. The

Graphics gems V (Macintosh version)

CERN Document Server

Paeth, Alan W

1995-01-01

Graphics Gems V is the newest volume in The Graphics Gems Series. It is intended to provide the graphics community with a set of practical tools for implementing new ideas and techniques, and to offer working solutions to real programming problems. These tools are written by a wide variety of graphics programmers from industry, academia, and research. The books in the series have become essential, time-saving tools for many programmers.Latest collection of graphics tips in The Graphics Gems Series written by the leading programmers in the field.Contains over 50 new gems displaying some of t

Graphical Rasch models

DEFF Research Database (Denmark)

Kreiner, Svend; Christensen, Karl Bang

Rasch models; Partial Credit models; Rating Scale models; Item bias; Differential item functioning; Local independence; Graphical models......Rasch models; Partial Credit models; Rating Scale models; Item bias; Differential item functioning; Local independence; Graphical models...

Using Common Graphics Paradigms Implemented in a Java Applet to Represent Complex Scheduling Requirements

Science.gov (United States)

Jaap, John; Meyer, Patrick; Davis, Elizabeth

1997-01-01

The experiments planned for the International Space Station promise to be complex, lengthy and diverse. The scarcity of the space station resources will cause significant competition for resources between experiments. The scheduling job facing the Space Station mission planning software requires a concise and comprehensive description of the experiments' requirements (to ensure a valid schedule) and a good description of the experiments' flexibility (to effectively utilize available resources). In addition, the continuous operation of the station, the wide geographic dispersion of station users, and the budgetary pressure to reduce operations manpower make a low-cost solution mandatory. A graphical representation of the scheduling requirements for station payloads implemented via an Internet-based application promises to be an elegant solution that addresses all of these issues. The graphical representation of experiment requirements permits a station user to describe his experiment by defining "activities" and "sequences of activities". Activities define the resource requirements (with alternatives) and other quantitative constraints of tasks to be performed. Activities definitions use an "outline" graphics paradigm. Sequences define the time relationships between activities. Sequences may also define time relationships with activities of other payloads or space station systems. Sequences of activities are described by a "network" graphics paradigm. The bulk of this paper will describe the graphical approach to representing requirements and provide examples that show the ease and clarity with which complex requirements can be represented. A Java applet, to run in a web browser, is being developed to support the graphical representation of payload scheduling requirements. Implementing the entry and editing of requirements via the web solves the problems introduced by the geographic dispersion of users. Reducing manpower is accomplished by developing a concise

Present condition and theme of the planning standards of parks and open space planning. Koen ryokuchi keikaku gijutsu hyojun no genjo to kadai

Energy Technology Data Exchange (ETDEWEB)

Takanashi, M. (Kanagawa Prefectural Government, Kanagawa (Japan))

1992-08-06

With the dramatic progress of urbanization, the rapid decrease of the green area and the open space, which is basis for ensuring the safety and the comfort of city life and formation of a good city environment, lead to the worsen of city environment. For the basic purpose of achieving the harmony between development and environment by considering the preservation of the green area and the open space, the green master plan is a representative example, and was made as the constitution of from a ground plan to the various plans such as region, city and nation based on the space unit of developing the human action. One of the important planning approach for the green area plan from conception to implementation is the planning standards of park and open space planning. This paper introduced the change of the system about the planning standards of park and open space planning, and explained necessarily the present state of greens master plan about preservation of the national environment and adjustment the park and open space. 1tab.

Silicon Graphics' IRIS InSight: An SGML Success Story.

Science.gov (United States)

Glushko, Robert J.; Kershner, Ken

1993-01-01

Offers a case history of the development of the Silicon Graphics "IRIS InSight" system, a system for viewing on-line documentation using Standard Generalized Markup Language. Notes that SGML's explicit encoding of structure and separation of structure and presentation make possible structure-based search, alternative structural views of…

Perception in statistical graphics

Science.gov (United States)

VanderPlas, Susan Ruth

There has been quite a bit of research on statistical graphics and visualization, generally focused on new types of graphics, new software to create graphics, interactivity, and usability studies. Our ability to interpret and use statistical graphics hinges on the interface between the graph itself and the brain that perceives and interprets it, and there is substantially less research on the interplay between graph, eye, brain, and mind than is sufficient to understand the nature of these relationships. The goal of the work presented here is to further explore the interplay between a static graph, the translation of that graph from paper to mental representation (the journey from eye to brain), and the mental processes that operate on that graph once it is transferred into memory (mind). Understanding the perception of statistical graphics should allow researchers to create more effective graphs which produce fewer distortions and viewer errors while reducing the cognitive load necessary to understand the information presented in the graph. Taken together, these experiments should lay a foundation for exploring the perception of statistical graphics. There has been considerable research into the accuracy of numerical judgments viewers make from graphs, and these studies are useful, but it is more effective to understand how errors in these judgments occur so that the root cause of the error can be addressed directly. Understanding how visual reasoning relates to the ability to make judgments from graphs allows us to tailor graphics to particular target audiences. In addition, understanding the hierarchy of salient features in statistical graphics allows us to clearly communicate the important message from data or statistical models by constructing graphics which are designed specifically for the perceptual system.

75 FR 6413 - Office of New Reactors; Proposed Revision to Standard Review Plan, Section 14.3.12 on Physical...

Science.gov (United States)

2010-02-09

... Standard Review Plan, Section 14.3.12 on Physical Security Hardware Inspections, Tests, Analyses, and.... SUMMARY: The NRC is soliciting public comment on NUREG-0800, ``Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants,'' on a proposed Revision 1 to Standard Review Plan (SRP...

Programación de gráficos 3D con Mathematica, DrawGraphics, CurvesGraphics, LiveGraphics3D y JavaView

OpenAIRE

Mora Flores, Walter; Instituto Tecnológico de Costa Rica; Figueroa, Geovanni; Instituto Tecnológico de Costa Rica

2015-01-01

Se muestra como integrar las herramientas: Mathematica (y los paquetes DrawGraphics y CurvesGraphics), LiveGraphics3D, JavaView y html, para crear algunas figuras 3D las cuales se pueden incrustar en páginas Web independientes y con posibilidad de interacción.

Mathematical structures for computer graphics

CERN Document Server

Janke, Steven J

2014-01-01

A comprehensive exploration of the mathematics behind the modeling and rendering of computer graphics scenes Mathematical Structures for Computer Graphics presents an accessible and intuitive approach to the mathematical ideas and techniques necessary for two- and three-dimensional computer graphics. Focusing on the significant mathematical results, the book establishes key algorithms used to build complex graphics scenes. Written for readers with various levels of mathematical background, the book develops a solid foundation for graphics techniques and fills in relevant grap

Stereotactic biopsy aided by a computer graphics workstation: experience with 200 consecutive cases.

Science.gov (United States)

Ulm, A J; Bova, F J; Friedman, W A

2001-12-01

The advent of modern computer technology has made it possible to examine not just the target point, but the entire trajectory in planning for stereotactic biopsies. Two hundred consecutive biopsies were performed by one surgeon, utilizing a computer graphics workstation. The target point, entry point, and complete trajectory were carefully scrutinized and adjusted to minimize potential complications. Pathologically abnormal tissue was obtained in 197 cases (98.5%). There was no mortality in this series. Symptomatic hemorrhages occurred in 4 cases (2%). Computer graphics workstations facilitate safe and effective biopsies in virtually any brain area.

A Visual Model for the Variance and Standard Deviation

Science.gov (United States)

Orris, J. B.

2011-01-01

This paper shows how the variance and standard deviation can be represented graphically by looking at each squared deviation as a graphical object--in particular, as a square. A series of displays show how the standard deviation is the size of the average square.

New SCALE graphical interface for criticality safety

International Nuclear Information System (INIS)

Bowman, Stephen M.; Horwedel, James E.

2003-01-01

The SCALE (Standardized Computer Analyses for Licensing Evaluation) computer software system developed at Oak Ridge National Laboratory is widely used and accepted around the world for criticality safety analyses. SCALE includes the well-known KENO V.a and KENO-VI three-dimensional (3-D) Monte Carlo criticality computer codes. One of the current development efforts aimed at making SCALE easier to use is the SCALE Graphically Enhanced Editing Wizard (GeeWiz). GeeWiz is compatible with SCALE 5 and runs on Windows personal computers. GeeWiz provides input menus and context-sensitive help to guide users through the setup of their input. It includes a direct link to KENO3D to allow the user to view the components of their geometry model as it is constructed. Once the input is complete, the user can click a button to run SCALE and another button to view the output. KENO3D has also been upgraded for compatibility with SCALE 5 and interfaces directly with GeeWiz. GeeWiz and KENO3D for SCALE 5 are planned for release in late 2003. The presentation of this paper is designed as a live demonstration of GeeWiz and KENO3D for SCALE 5. (author)

Systems Biology Graphical Notation: Entity Relationship language Level 1 Version 2

Directory of Open Access Journals (Sweden)

Sorokin Anatoly

2015-06-01

Full Text Available The Systems Biological Graphical Notation (SBGN is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD, Entity Relationship (ER and Activity Flow (AF, allow for the representation of different aspects of biological and biochemical systems at different levels of detail.

Safety Standards Plan for Middlesex County Vocational & Technical High Schools.

Science.gov (United States)

Sommer, Cy

This vocational education safety standards plan outlines rules and regulations adopted by the Board of Education of Middlesex County Vocational and Technical High Schools. The first of eleven chapters presents demographics and a safety organization table for Middlesex County Vocational and Technical Schools. In chapter 2, six safety program…

Graphics Gems III IBM version

CERN Document Server

Kirk, David

1994-01-01

This sequel to Graphics Gems (Academic Press, 1990), and Graphics Gems II (Academic Press, 1991) is a practical collection of computer graphics programming tools and techniques. Graphics Gems III contains a larger percentage of gems related to modeling and rendering, particularly lighting and shading. This new edition also covers image processing, numerical and programming techniques, modeling and transformations, 2D and 3D geometry and algorithms,ray tracing and radiosity, rendering, and more clever new tools and tricks for graphics programming. Volume III also includes a

Evaluation of technological and economic standard of the mining industry. [USSR

Energy Technology Data Exchange (ETDEWEB)

Evdokimov, F.I.; Nekhaev, S.A.; Laptev, I.V.

1983-02-01

In order to assure constant growth in coal production, as stipulated in the five-year plan, an evaluation scheme has been devised. The technological and economic standard is judged by indicators such as productivity, self sufficiency, capital write-off and investment, as well as factors such as working conditions, financial incentives, health services, and absenteeism. The method of canonical analysis yields expressions for technological and economic factors, and a coefficient for the utilization of resources. Relationship of these coefficients and factors is demonstrated graphically.

Graphical Models with R

CERN Document Server

Højsgaard, Søren; Lauritzen, Steffen

2012-01-01

Graphical models in their modern form have been around since the late 1970s and appear today in many areas of the sciences. Along with the ongoing developments of graphical models, a number of different graphical modeling software programs have been written over the years. In recent years many of these software developments have taken place within the R community, either in the form of new packages or by providing an R interface to existing software. This book attempts to give the reader a gentle introduction to graphical modeling using R and the main features of some of these packages. In add

Graphic Organizers and Students with Learning Disabilities: A Meta-Analysis

Science.gov (United States)

Dexter, Douglas D.; Hughes, Charles A.

2011-01-01

This meta-analysis reviews experimental and quasi-experimental studies in which upper-elementary, intermediate, and secondary students with learning disabilities learned from graphic organizers. Following an exhaustive search for studies meeting specified design criteria, 55 standardized mean effect sizes were extracted from 16 articles involving…

75 FR 29588 - Office of New Reactors: Proposed NUREG-0800; Standard Review Plan Section 13.6.6, Draft Revision...

Science.gov (United States)

2010-05-26

...; Standard Review Plan Section 13.6.6, Draft Revision 0 on Cyber Security Plan AGENCY: Nuclear Regulatory... Plants,'' on a proposed Standard Review Plan (SRP) Section 13.6.6 on ``Cyber Security Plan'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML093560837). The Office of Nuclear Security...

Graphic notation

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

1992-01-01

Texbook to be used along with training the practise of graphic notation. Describes method; exercises; bibliography; collection of examples. If you can read Danish, please refer to that edition which is by far much more updated.......Texbook to be used along with training the practise of graphic notation. Describes method; exercises; bibliography; collection of examples. If you can read Danish, please refer to that edition which is by far much more updated....

Graphics gems

CERN Document Server

Glassner, Andrew S

1993-01-01

""The GRAPHICS GEMS Series"" was started in 1990 by Andrew Glassner. The vision and purpose of the Series was - and still is - to provide tips, techniques, and algorithms for graphics programmers. All of the gems are written by programmers who work in the field and are motivated by a common desire to share interesting ideas and tools with their colleagues. Each volume provides a new set of innovative solutions to a variety of programming problems.

What is sought from graphic designers? A first thematic analysis of job offers for graphic design positions in the United Kingdom

OpenAIRE

Nicoletti Dziobczenski, Paulo; Person, Oscar

2016-01-01

An empirically grounded understanding about which knowledge and skills that are sought from designers is missing for a number of professional subfields of design. This gap in research challenges i) design educators in planning their educational offerings and ii) design practitioners and students in articulating their contribution to clients and future employers. In this paper, we study the references that are made to knowledge and skills in job offers for graphic designers in UK. Based on a f...

Graphical tools for TV weather presentation

Science.gov (United States)

Najman, M.

2010-09-01

Contemporary meteorology and its media presentation faces in my opinion following key tasks: - Delivering the meteorological information to the end user/spectator in understandable and modern fashion, which follows industry standard of video output (HD, 16:9) - Besides weather icons show also the outputs of numerical weather prediction models, climatological data, satellite and radar images, observed weather as actual as possible. - Does not compromise the accuracy of presented data. - Ability to prepare and adjust the weather show according to actual synoptic situtation. - Ability to refocus and completely adjust the weather show to actual extreme weather events. - Ground map resolution weather data presentation need to be at least 20 m/pixel to be able to follow the numerical weather prediction model resolution. - Ability to switch between different numerical weather prediction models each day, each show or even in the middle of one weather show. - The graphical weather software need to be flexible and fast. The graphical changes nee to be implementable and airable within minutes before the show or even live. These tasks are so demanding and the usual original approach of custom graphics could not deal with it. It was not able to change the show every day, the shows were static and identical day after day. To change the content of the weather show daily was costly and most of the time impossible with the usual approach. The development in this area is fast though and there are several different options for weather predicting organisations such as national meteorological offices and private meteorological companies to solve this problem. What are the ways to solve it? What are the limitations and advantages of contemporary graphical tools for meteorologists? All these questions will be answered.

A computer-controlled conformal radiotherapy system. III: graphical simulation and monitoring of treatment delivery

International Nuclear Information System (INIS)

Kessler, Marc L.; McShan, Daniel L.; Fraass, Benedick A.

1995-01-01

Purpose: Safe and efficient delivery of radiotherapy using computer-controlled machines requires new procedures to design and verify the actual delivery of these treatments. Graphical simulation and monitoring techniques for treatment delivery have been developed for this purpose. Methods and Materials: A graphics-based simulator of the treatment machine and a set of procedures for creating and manipulating treatment delivery scripts are used to simulate machine motions, detect collisions, and monitor machine positions during treatment. The treatment delivery simulator is composed of four components: a three-dimensional dynamic model of the treatment machine; a motion simulation and collision detection algorithm, user-interface widgets that mimic the treatment machine's control and readout devices; and an icon-based interface for creating and manipulating treatment delivery scripts. These components are used in a stand-alone fashion for interactive treatment delivery planning and integrated with a machine control system for treatment implementation and monitoring. Results: A graphics-based treatment delivery simulator and a set of procedures for planning and monitoring computer-controlled treatment delivery have been developed and implemented as part of a comprehensive computer-controlled conformal radiotherapy system. To date, these techniques have been used to design and help monitor computer-controlled treatments on a radiotherapy machine for more than 200 patients. Examples using these techniques for treatment delivery planning and on-line monitoring of machine motions during therapy are described. Conclusion: A system that provides interactive graphics-based tools for defining the sequence of machine motions, simulating treatment delivery including collision detection, and presenting the therapists with continual visual feedback from the treatment machine has been successfully implemented for routine clinical use as part of an overall system for computer

Interactive Graphic Journalism

NARCIS (Netherlands)

Schlichting, Laura

2016-01-01

textabstractThis paper examines graphic journalism (GJ) in a transmedial context, and argues that transmedial graphic journalism (TMGJ) is an important and fruitful new form of visual storytelling, that will re-invigorate the field of journalism, as it steadily tests out and plays with new media,

Evaluating Texts for Graphical Literacy Instruction: The Graphic Rating Tool

Science.gov (United States)

Roberts, Kathryn L.; Brugar, Kristy A.; Norman, Rebecca R.

2015-01-01

In this article, we present the Graphical Rating Tool (GRT), which is designed to evaluate the graphical devices that are commonly found in content-area, non-fiction texts, in order to identify books that are well suited for teaching about those devices. We also present a "best of" list of science and social studies books, which includes…

Graphical programming at Sandia National Laboratories

International Nuclear Information System (INIS)

McDonald, M.J.; Palmquist, R.D.; Desjarlais, L.

1993-09-01

Sandia has developed an advanced operational control system approach, called Graphical Programming, to design, program, and operate robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. Graphical Programming also provides an efficient and easy-to-use interface to traditional robot systems for use in setup and programming tasks. This paper provides an overview of the Graphical Programming approach and lists key features of Graphical Programming systems. Graphical Programming uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Programming Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control

Industrial application of a graphics computer-based training system

International Nuclear Information System (INIS)

Klemm, R.W.

1985-01-01

Graphics Computer Based Training (GCBT) roles include drilling, tutoring, simulation and problem solving. Of these, Commonwealth Edison uses mainly tutoring, simulation and problem solving. These roles are not separate in any particular program. They are integrated to provide tutoring and part-task simulation, part-task simulation and problem solving, or problem solving tutoring. Commonwealth's Graphics Computer Based Training program was a result of over a year's worth of research and planning. The keys to the program are it's flexibility and control. Flexibility is maintained through stand alone units capable of program authoring and modification for plant/site specific users. Yet, the system has the capability to support up to 31 terminals with a 40 mb hard disk drive. Control of the GCBT program is accomplished through establishment of development priorities and a central development facility (Commonwealth Edison's Production Training Center)

Transforming Graphical System Models to Graphical Attack Models

DEFF Research Database (Denmark)

Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, Rene Rydhof

2016-01-01

Manually identifying possible attacks on an organisation is a complex undertaking; many different factors must be considered, and the resulting attack scenarios can be complex and hard to maintain as the organisation changes. System models provide a systematic representation of organisations...... approach to transforming graphical system models to graphical attack models in the form of attack trees. Based on an asset in the model, our transformations result in an attack tree that represents attacks by all possible actors in the model, after which the actor in question has obtained the asset....

Computer graphics at VAX JINR

International Nuclear Information System (INIS)

Balashov, V.K.

1991-01-01

The structure of the software for computer graphics at VAX JINR is described. It consists of graphical packages GKS, WAND and a set graphicals packages for High Energy Physics application designed at CERN. 17 refs.; 1 tab

Management plan documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 2

Science.gov (United States)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.

Enriching Students’ Vocabulary Mastery Using Graphic Organizers

Directory of Open Access Journals (Sweden)

Syaifudin Latif Darmawan

2017-04-01

Full Text Available This action research is carried out to (1 identify whether graphic organizers enrich student’s vocabulary mastery; and (2 to describe the classroom situation when graphic organizers are employed in instructional process of vocabulary. The research is conducted in two cycles from March to May 2016/2017 in the eight years of SMP Muhammadiyah Sekampung, East lampung. The procedure of the research consists of identifying the problem, planning the action, implementing the action, observing the action, and reflecting the result of the research. Qualitative data are collected through interview, observation, questionnaire, and research diary. Quantitative data are collected through test. To analyze qualitative data, the researcher used constant comparative method. It consists of four steps: (1 comparing incidents applicable to each category; (2 Integrating categories and their properties; (3 delimiting the theory; (4 Writing the theory. Meanwhile, to analyze quantitative data, the researcher employed descriptive statistic.    The result of the research shows that using graphic organizers can enrich students’ vocabulary mastery and classroom situation. The improvement on students’ vocabulary included; a the students are able to speak English; b the students are able to understand the meaning of the text as they have a lot of vocabularies. The improvement of the classroom situation; (a students come on time in the class (b students are more motivated to join the class (c Students pay more attention in the instructional process (d students’ participation in responding the questions are high.

The Case for Graphic Novels

Directory of Open Access Journals (Sweden)

Steven Hoover

2012-04-01

Full Text Available Many libraries and librarians have embraced graphic novels. A number of books, articles, and presentations have focused on the history of the medium and offered advice on building and maintaining collections, but very little attention has been given the question of how integrate graphic novels into a library’s instructional efforts. This paper will explore the characteristics of graphic novels that make them a valuable resource for librarians who focus on research and information literacy instruction, identify skills and competencies that can be taught by the study of graphic novels, and will provide specific examples of how to incorporate graphic novels into instruction.

Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

Energy Technology Data Exchange (ETDEWEB)

Rosemann, Andreas [Gesellschaft fuer integrierte Systemplanung (GiS) mbH, Weinheim (Germany)

2014-05-15

In nuclear power plants it is common to carry out the technical planning of the annual outage work orders in an Enterprise Application Management (EAM) system and to schedule the outage tasks in a project planning tool. The reason for this is historical: Former EAM systems did not (or just to some extend) offer the necessary functionalities to realise the scheduling of the outage; graphical support for the planning was not provided at all. Consequently, scheduling the annual outage was performed in a separate planning tool. Modern Enterprise Application Management (EAM) software builds on established project planning tools with respect to the functionalities and timing of work orders. As a standard they provide editable charts as well as a lot of functionalities which are required for scheduling the annual outage. The functional gap between the demanded planning functionalities and the functionalities provided by the EAM system has been significantly reduced. Depending on the deployed software itself it is possible to extend the EAM system with little effort (in comparison to the promising advantages) so that external project timing planning tools are not required any more. By shifting towards an integrated planning tool, efficiency in planning an outage as well as the quality of communication of the current planning status increases. Furthermore, the basis of information for work orders by the control room staff and therefore safety can be enhanced. (orig.)

Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

International Nuclear Information System (INIS)

Rosemann, Andreas

2014-01-01

In nuclear power plants it is common to carry out the technical planning of the annual outage work orders in an Enterprise Application Management (EAM) system and to schedule the outage tasks in a project planning tool. The reason for this is historical: Former EAM systems did not (or just to some extend) offer the necessary functionalities to realise the scheduling of the outage; graphical support for the planning was not provided at all. Consequently, scheduling the annual outage was performed in a separate planning tool. Modern Enterprise Application Management (EAM) software builds on established project planning tools with respect to the functionalities and timing of work orders. As a standard they provide editable charts as well as a lot of functionalities which are required for scheduling the annual outage. The functional gap between the demanded planning functionalities and the functionalities provided by the EAM system has been significantly reduced. Depending on the deployed software itself it is possible to extend the EAM system with little effort (in comparison to the promising advantages) so that external project timing planning tools are not required any more. By shifting towards an integrated planning tool, efficiency in planning an outage as well as the quality of communication of the current planning status increases. Furthermore, the basis of information for work orders by the control room staff and therefore safety can be enhanced. (orig.)

Standard review plan for dry cask storage systems. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 {open_quotes}Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Cask{close_quotes} contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed.

Standard review plan for dry cask storage systems. Final report

International Nuclear Information System (INIS)

1997-01-01

The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 open-quotes Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Caskclose quotes contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed

EASI graphics - Version II

International Nuclear Information System (INIS)

Allensworth, J.A.

1984-04-01

EASI (Estimate of Adversary Sequence Interruption) is an analytical technique for measuring the effectiveness of physical protection systems. EASI Graphics is a computer graphics extension of EASI which provides a capability for performing sensitivity and trade-off analyses of the parameters of a physical protection system. This document reports on the implementation of the Version II of EASI Graphics and illustrates its application with some examples. 5 references, 15 figures, 6 tables

Hematology laboratory standardization: a plan for harmonization in Asia.

Science.gov (United States)

Bunyaratvej, A; Tatsumi, N; Funahara, Y

1999-01-01

Hematology laboratory is generally required in the hospital. At the macroscale, hematology laboratories have served a large number of population. In Asia, more than 3,000 million people are potentially to use the hematology laboratory service, particularly the complete blood count. Since 1970s, automated technology has been introduced to Asia and as years passed by, technology diversity is increasing. However, there are considerable number of hematology laboratories that have no automated machine. They are still relied on manual technology which is still variable in spectrophotometer for hemoglobin determination, centrifuge for hematocrit and diluting pipet for cell counting. In particular, blood smear preparation and interpretation are very difficult to control for standardization from person to person and laboratory to laboratory. Different methodology and a large population in the huge geographical area in Asia, the agreement of standard criteria is greatly important. This report has shown strategy and action plan to reach the goal of hematology laboratory standardization in Asia.

Systems Biology Graphical Notation: Activity Flow language Level 1 Version 1.2

Directory of Open Access Journals (Sweden)

Mi Huaiyu

2015-06-01

Full Text Available The Systems Biological Graphical Notation (SBGN is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD, Entity Relationship (ER and Activity Flow (AF, allow for the representation of different aspects of biological and biochemical systems at different levels of detail.

A handbook of statistical graphics using SAS ODS

CERN Document Server

Der, Geoff

2014-01-01

An Introduction to Graphics: Good Graphics, Bad Graphics, Catastrophic Graphics and Statistical GraphicsThe Challenger DisasterGraphical DisplaysA Little History and Some Early Graphical DisplaysGraphical DeceptionAn Introduction to ODS GraphicsGenerating ODS GraphsODS DestinationsStatistical Graphics ProceduresODS Graphs from Statistical ProceduresControlling ODS GraphicsControlling Labelling in GraphsODS Graphics EditorGraphs for Displaying the Characteristics of Univariate Data: Horse Racing, Mortality Rates, Forearm Lengths, Survival Times and Geyser EruptionsIntroductionPie Chart, Bar Cha

Graphical Turbulence Guidance - Composite

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Forecast turbulence hazards identified by the Graphical Turbulence Guidance algorithm. The Graphical Turbulence Guidance product depicts mid-level and upper-level...

Deterministic Graphical Games Revisited

DEFF Research Database (Denmark)

Andersson, Daniel; Hansen, Kristoffer Arnsfelt; Miltersen, Peter Bro

2008-01-01

We revisit the deterministic graphical games of Washburn. A deterministic graphical game can be described as a simple stochastic game (a notion due to Anne Condon), except that we allow arbitrary real payoffs but disallow moves of chance. We study the complexity of solving deterministic graphical...... games and obtain an almost-linear time comparison-based algorithm for computing an equilibrium of such a game. The existence of a linear time comparison-based algorithm remains an open problem....

Trend Monitoring System (TMS) graphics software

Science.gov (United States)

Brown, J. S.

1979-01-01

A prototype bus communications systems, which is being used to support the Trend Monitoring System (TMS) and to evaluate the bus concept is considered. A set of FORTRAN-callable graphics subroutines for the host MODCOMP comuter, and an approach to splitting graphics work between the host and the system's intelligent graphics terminals are described. The graphics software in the MODCOMP and the operating software package written for the graphics terminals are included.

Collection Of Software For Computer Graphics

Science.gov (United States)

Hibbard, Eric A.; Makatura, George

1990-01-01

Ames Research Graphics System (ARCGRAPH) collection of software libraries and software utilities assisting researchers in generating, manipulating, and visualizing graphical data. Defines metafile format containing device-independent graphical data. File format used with various computer-graphics-manipulation and -animation software packages at Ames, including SURF (COSMIC Program ARC-12381) and GAS (COSMIC Program ARC-12379). Consists of two-stage "pipeline" used to put out graphical primitives. ARCGRAPH libraries developed on VAX computer running VMS.

Real-time graphic display utility for nuclear safety applications

International Nuclear Information System (INIS)

Yang, S.; Huang, X.; Taylor, J.; Stevens, J.; Gerardis, T.; Hsu, A.; McCreary, T.

2006-01-01

With the increasing interests in the nuclear energy, new nuclear power plants will be constructed and licensed, and older generation ones will be upgraded for assuring continuing operation. The tendency of adopting the latest proven technology and the fact of older parts becoming obsolete have made the upgrades imperative. One of the areas for upgrades is the older CRT display being replaced by the latest graphics displays running under modern real time operating system (RTOS) with safety graded modern computer. HFC has developed a graphic display utility (GDU) under the QNX RTOS. A standard off-the-shelf software with a long history of performance in industrial applications, QNX RTOS used for safety applications has been examined via a commercial dedication process that is consistent with the regulatory guidelines. Through a commercial survey, a design life cycle and an operating history evaluation, and necessary tests dictated by the dedication plan, it is reasonably confirmed that the QNX RTOS was essentially equivalent to what would be expected in the nuclear industry. The developed GDU operates and communicates with the existing equipment through a dedicated serial channel of a flat panel controller (FPC) module. The FPC module drives a flat panel display (FPD) monitor. A touch screen mounted on the FPD serves as the normal operator interface with the FPC/FPD monitor system. The GDU can be used not only for replacing older CRTs but also in new applications. The replacement of the older CRT does not disturb the function of the existing equipment. It not only provides modern proven technology upgrade but also improves human ergonomics. The FPC, which can be used as a standalone controller running with the GDU, is an integrated hardware and software module. It operates as a single board computer within a control system, and applies primarily to the graphics display, targeting, keyboard and mouse. During normal system operation, the GDU has two sources of data

Application of standard softWare of the CDC-6500 interactive graphic therminal for representation of spiral scanning data and event saving

International Nuclear Information System (INIS)

Nehrguj, B.; Ososkov, G.A.

1978-01-01

A system of programs, based on a standard graphic display software, is developed which enables the user to display the results of spiral scanning using a terminal keyboard and a FILTR program. Quality assessment of filtering is also available. The use of a cursor which provides a certain feedback between the display and the CDC-6500 computer provides good capabilities for the investigation of the filtering program failures and saves the most interesting events. To speed up scanning of events, a special program is written which performs pre-filtration and reduces 4 to 5 fold the amount of source numerical data of track projections. Its flowchart is based on the well-known method of cords, which allows to save 10-12 events/hour

Graphics gems

CERN Document Server

Heckbert, Paul S

1994-01-01

Graphics Gems IV contains practical techniques for 2D and 3D modeling, animation, rendering, and image processing. The book presents articles on polygons and polyhedral; a mix of formulas, optimized algorithms, and tutorial information on the geometry of 2D, 3D, and n-D space; transformations; and parametric curves and surfaces. The text also includes articles on ray tracing; shading 3D models; and frame buffer techniques. Articles on image processing; algorithms for graphical layout; basic interpolation methods; and subroutine libraries for vector and matrix algebra are also demonstrated. Com

Antinomies of Semiotics in Graphic Design

Science.gov (United States)

Storkerson, Peter

2010-01-01

The following paper assesses the roles played by semiotics in graphic design and in graphic design education, which both reflects and shapes practice. It identifies a series of factors; graphic design education methods and culture; semiotic theories themselves and their application to graphic design; the two wings of Peircian semiotics and…

An Opening: Graphic Design's Discursive Spaces.

Science.gov (United States)

Blauvelt, Andrew

1994-01-01

Introduces a special issue on critical histories of graphic design with a review of the particular problems identified with the history of graphic design as a field of study and the emerging discipline of graphic design history. Makes a case for the examination of graphic design through its relationships with larger discourses. (SR)

Computer graphics in engineering education

CERN Document Server

Rogers, David F

2013-01-01

Computer Graphics in Engineering Education discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) as an instructional material in engineering education. Each of the nine chapters of this book covers topics and cites examples that are relevant to the relationship of CAD-CAM with engineering education. The first chapter discusses the use of computer graphics in the U.S. Naval Academy, while Chapter 2 covers key issues in instructional computer graphics. This book then discusses low-cost computer graphics in engineering education. Chapter 4 discusses the uniform b

Graphics server and action language interpreter greatly simplify the composition of a graphical user interface

International Nuclear Information System (INIS)

Mueller, R.

1992-01-01

A new control system based on a distributed computing environment is gradually installed at BESSY, a 800 MeV storage ring dedicated to the generation of synchrotron light in the VUV and soft X-ray region. The new operator consoles are large high resolution, bitmap oriented color graphic screens with mouse and keyboard. A new graphical user interface has been developed with a user interface management system. A graphics server encapsulates completely representational aspects, mediates between user interactions and application variables and takes care of a consistent state of graphical and applicational objects. Graphical representations, semantics of user interactions and interpreter instructions are defined in a database written in a simple and comprehensible user interface definition language. (R.P.) 7 refs.; 5 figs

SBOL Visual: A Graphical Language for Genetic Designs

Science.gov (United States)

Adler, Aaron; Beal, Jacob; Bhatia, Swapnil; Cai, Yizhi; Chen, Joanna; Clancy, Kevin; Galdzicki, Michal; Hillson, Nathan J.; Le Novère, Nicolas; Maheshwari, Akshay J.; McLaughlin, James Alastair; Myers, Chris J.; P, Umesh; Pocock, Matthew; Rodriguez, Cesar; Soldatova, Larisa; Stan, Guy-Bart V.; Swainston, Neil; Wipat, Anil; Sauro, Herbert M.

2015-01-01

Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. It consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual. PMID:26633141

76 FR 55056 - Toy Safety Standard: Strategic Outreach and Education Plan

Science.gov (United States)

2011-09-06

... to test and certify to the toy safety standard. We plan to use traditional and social media to... testing and certification requirements for children's toys and toy chests and their compliance with ASTM... manufacturers of children's toys must ensure that covered toys are tested for compliance with the toy safety...

Accelerating Molecular Dynamic Simulation on Graphics Processing Units

Science.gov (United States)

Friedrichs, Mark S.; Eastman, Peter; Vaidyanathan, Vishal; Houston, Mike; Legrand, Scott; Beberg, Adam L.; Ensign, Daniel L.; Bruns, Christopher M.; Pande, Vijay S.

2009-01-01

We describe a complete implementation of all-atom protein molecular dynamics running entirely on a graphics processing unit (GPU), including all standard force field terms, integration, constraints, and implicit solvent. We discuss the design of our algorithms and important optimizations needed to fully take advantage of a GPU. We evaluate its performance, and show that it can be more than 700 times faster than a conventional implementation running on a single CPU core. PMID:19191337

3D for Graphic Designers

CERN Document Server

Connell, Ellery

2011-01-01

Helping graphic designers expand their 2D skills into the 3D space The trend in graphic design is towards 3D, with the demand for motion graphics, animation, photorealism, and interactivity rapidly increasing. And with the meteoric rise of iPads, smartphones, and other interactive devices, the design landscape is changing faster than ever.2D digital artists who need a quick and efficient way to join this brave new world will want 3D for Graphic Designers. Readers get hands-on basic training in working in the 3D space, including product design, industrial design and visualization, modeling, ani

Standard review plan for applications for sealed source and device evaluations and registrations

International Nuclear Information System (INIS)

1996-11-01

The purpose of this document is to provide the reviewer of a request for a sealed source or device safety evaluation with the information and materials necessary to make a determination that the product is acceptable for licensing purposes. It provides the reviewer with a listing of the applicable regulations and industry standards, policies affecting evaluation and registration, certain administrative procedures to be followed, and information on how to perform the evaluation and write the registration certificate. Standard review plans are prepared for the guidance of the Office of Nuclear Material Safety and Safeguards staff responsible for the review of a sealed source or device application. This document is made available to the public as part of the Commission's policy to inform the nuclear industry and the general public of regulatory procedures and policies. Standard review plans are not substitutes for regulatory guides or the Commission's regulations and compliance with them is not required

Standard review plan for applications for sealed source and device evaluations and registrations

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

The purpose of this document is to provide the reviewer of a request for a sealed source or device safety evaluation with the information and materials necessary to make a determination that the product is acceptable for licensing purposes. It provides the reviewer with a listing of the applicable regulations and industry standards, policies affecting evaluation and registration, certain administrative procedures to be followed, and information on how to perform the evaluation and write the registration certificate. Standard review plans are prepared for the guidance of the Office of Nuclear Material Safety and Safeguards staff responsible for the review of a sealed source or device application. This document is made available to the public as part of the Commission`s policy to inform the nuclear industry and the general public of regulatory procedures and policies. Standard review plans are not substitutes for regulatory guides or the Commission`s regulations and compliance with them is not required.

Mathematics for computer graphics

CERN Document Server

Vince, John

2006-01-01

Helps you understand the mathematical ideas used in computer animation, virtual reality, CAD, and other areas of computer graphics. This work also helps you to rediscover the mathematical techniques required to solve problems and design computer programs for computer graphic applications

Television equipment for graphic data input into a computer

International Nuclear Information System (INIS)

Dement'ev, V.G.; Dudin, Yu.Yu.; Pendyur, S.A.

1988-01-01

Television equipment made in CAMAC standard for graphic data input into a computer, in particular, of oscillograms from the screen of the storing oscillograph is described. Determination of point position is based on processing of video signal from telecamera viewing the oscillograph screen so that the line scanning is perpendicular to the orientation of oscillograph scan. The time of one point reading is approximately 20 ms

Reasoning with probabilistic and deterministic graphical models exact algorithms

CERN Document Server

Dechter, Rina

2013-01-01

Graphical models (e.g., Bayesian and constraint networks, influence diagrams, and Markov decision processes) have become a central paradigm for knowledge representation and reasoning in both artificial intelligence and computer science in general. These models are used to perform many reasoning tasks, such as scheduling, planning and learning, diagnosis and prediction, design, hardware and software verification, and bioinformatics. These problems can be stated as the formal tasks of constraint satisfaction and satisfiability, combinatorial optimization, and probabilistic inference. It is well

Flowfield computer graphics

Science.gov (United States)

Desautel, Richard

1993-01-01

The objectives of this research include supporting the Aerothermodynamics Branch's research by developing graphical visualization tools for both the branch's adaptive grid code and flow field ray tracing code. The completed research for the reporting period includes development of a graphical user interface (GUI) and its implementation into the NAS Flowfield Analysis Software Tool kit (FAST), for both the adaptive grid code (SAGE) and the flow field ray tracing code (CISS).

Computer graphics and research projects

International Nuclear Information System (INIS)

Ingtrakul, P.

1994-01-01

This report was prepared as an account of scientific visualization tools and application tools for scientists and engineers. It is provided a set of tools to create pictures and to interact with them in natural ways. It applied many techniques of computer graphics and computer animation through a number of full-color presentations as computer animated commercials, 3D computer graphics, dynamic and environmental simulations, scientific modeling and visualization, physically based modelling, and beavioral, skelatal, dynamics, and particle animation. It took in depth at original hardware and limitations of existing PC graphics adapters contain syste m performance, especially with graphics intensive application programs and user interfaces

Developing a Markup Language for Encoding Graphic Content in Plan Documents

Science.gov (United States)

Li, Jinghuan

2009-01-01

While deliberating and making decisions, participants in urban development processes need easy access to the pertinent content scattered among different plans. A Planning Markup Language (PML) has been proposed to represent the underlying structure of plans in an XML-compliant way. However, PML currently covers only textual information and lacks…

Computer graphics in heat-transfer simulations

International Nuclear Information System (INIS)

Hamlin, G.A. Jr.

1980-01-01

Computer graphics can be very useful in the setup of heat transfer simulations and in the display of the results of such simulations. The potential use of recently available low-cost graphics devices in the setup of such simulations has not been fully exploited. Several types of graphics devices and their potential usefulness are discussed, and some configurations of graphics equipment are presented in the low-, medium-, and high-price ranges

Resurfacing Graphics

Directory of Open Access Journals (Sweden)

Prof. Patty K. Wongpakdee

2013-06-01

Full Text Available “Resurfacing Graphics” deals with the subject of unconventional design, with the purpose of engaging the viewer to experience the graphics beyond paper’s passive surface. Unconventional designs serve to reinvigorate people, whose senses are dulled by the typical, printed graphics, which bombard them each day. Today’s cutting-edge designers, illustrators and artists utilize graphics in a unique manner that allows for tactile interaction. Such works serve as valuable teaching models and encourage students to do the following: 1 investigate the trans-disciplines of art and technology; 2 appreciate that this approach can have a positive effect on the environment; 3 examine and research other approaches of design communications and 4 utilize new mediums to stretch the boundaries of artistic endeavor. This paper examines how visuals communicators are “Resurfacing Graphics” by using atypical surfaces and materials such as textile, wood, ceramics and even water. Such non-traditional transmissions of visual language serve to demonstrate student’s overreliance on paper as an outdated medium. With this exposure, students can become forward-thinking, eco-friendly, creative leaders by expanding their creative breadth and continuing the perpetual exploration for new ways to make their mark.

Resurfacing Graphics

Directory of Open Access Journals (Sweden)

Prof. Patty K. Wongpakdee

2013-06-01

Full Text Available “Resurfacing Graphics” deals with the subject of unconventional design, with the purpose of engaging the viewer to experience the graphics beyond paper’s passive surface. Unconventional designs serve to reinvigorate people, whose senses are dulled by the typical, printed graphics, which bombard them each day. Today’s cutting-edge designers, illustrators and artists utilize graphics in a unique manner that allows for tactile interaction. Such works serve as valuable teaching models and encourage students to do the following: 1 investigate the trans-disciplines of art and technology; 2 appreciate that this approach can have a positive effect on the environment; 3 examine and research other approaches of design communications and 4 utilize new mediums to stretch the boundaries of artistic endeavor. This paper examines how visuals communicators are “Resurfacing Graphics” by using atypical surfaces and materials such as textile, wood, ceramics and even water. Such non-traditional transmissions of visual language serve to demonstrate student’s overreliance on paper as an outdated medium. With this exposure, students can become forward-thinking, eco-friendly, creative leaders by expanding their creative breadth and continuing the perpetual exploration for new ways to make their mark. 

Producing EGS4 shower displays with the Unified Graphics System

International Nuclear Information System (INIS)

Cowan, R.F.

1990-01-01

The EGS4 Code System has been coupled with the SLAC Unified Graphics System in such a manner as to provide a means for displaying showers on UGS77-supported devices. This is most easily accomplished by attaching an auxiliary subprogram package (SHOWGRAF) to existing EGS4 User Codes and making use of a graphics display or a post-processor code called EGS4PL. SHOWGRAF may be used to create shower displays directly on interactive IBM 5080 color display devices, supporting three-dimensional rotations, translations, and zoom features, and providing illustration of particle types and energies by color and/or intensity. Alternatively, SHOWGRAF may be used to record a two-dimensional projection of the shower in a device-independent graphics file. The EGS4PL post-processor may then be used to convert this file into device-dependent graphics code for any UGS77-supported device. Options exist within EGS4PL that allow for two-dimensional translations and zoom, for creating line structure to indicate particle types and energies, and for optional display of particles by type. All of this is facilitated by means of the command processor EGS4PL EXEC together with new options (5080 and PDEV) with the standard EGS4IN EXEC routine for running EGS4 interactively under VM/SP. 6 refs

Graphical symbol recognition

OpenAIRE

K.C. , Santosh; Wendling , Laurent

2015-01-01

International audience; The chapter focuses on one of the key issues in document image processing i.e., graphical symbol recognition. Graphical symbol recognition is a sub-field of a larger research domain: pattern recognition. The chapter covers several approaches (i.e., statistical, structural and syntactic) and specially designed symbol recognition techniques inspired by real-world industrial problems. It, in general, contains research problems, state-of-the-art methods that convey basic s...

Some Thoughts on Contemporary Graphic Print

Directory of Open Access Journals (Sweden)

Stefan Skiba

2016-09-01

Full Text Available The production requirements of original graphic works of art have changed since 1980. The development of digital printing using lightfast colors now rivals traditional techniques such as wood cut, screen print, lithography, etching etc. Today, with respect to artistic legitimacy, original graphics using traditional printing techniques compete with original graphics produced by digital printing techniques on the art market. What criteria distinguish traditional printing techniques from those of digital printing in the production and acquisition of original graphics? What consequences is the serious artist faced with when deciding to implement digital print production? How does digital print change original graphic acquisition decisions?

Graphic Ecologies

Directory of Open Access Journals (Sweden)

Brook Weld Muller

2014-12-01

Full Text Available This essay describes strategic approaches to graphic representation associated with critical environmental engagement and that build from the idea of works of architecture as stitches in the ecological fabric of the city. It focuses on the building up of partial or fragmented graphics in order to describe inclusive, open-ended possibilities for making architecture that marry rich experience and responsive performance. An aphoristic approach to crafting drawings involves complex layering, conscious absence and the embracing of tension. A self-critical attitude toward the generation of imagery characterized by the notion of ‘loose precision’ may lead to more transformative and environmentally responsive architectures.

Computer graphics from basic to application

International Nuclear Information System (INIS)

Kim, Do Hyeong; Mun, Sung Min

1998-04-01

This book mentions conception of computer graphics, background history, necessity and applied field like construction design, image processing, auto mobile design, fashion design and TV broadcast, basic principle of computer, computer graphics hardware, computer graphics software such as adobe illustrator tool box and adobe photo shop, quarkXpress like introduction, application and operating circumstance, 3D graphics with summary, difference of versions of 3D studio and system, and Auto CAD application.

Computer graphics from basic to application

Energy Technology Data Exchange (ETDEWEB)

Kim, Do Hyeong; Mun, Sung Min

1998-04-15

This book mentions conception of computer graphics, background history, necessity and applied field like construction design, image processing, auto mobile design, fashion design and TV broadcast, basic principle of computer, computer graphics hardware, computer graphics software such as adobe illustrator tool box and adobe photo shop, quarkXpress like introduction, application and operating circumstance, 3D graphics with summary, difference of versions of 3D studio and system, and Auto CAD application.

Graphical models for genetic analyses

DEFF Research Database (Denmark)

Lauritzen, Steffen Lilholt; Sheehan, Nuala A.

2003-01-01

This paper introduces graphical models as a natural environment in which to formulate and solve problems in genetics and related areas. Particular emphasis is given to the relationships among various local computation algorithms which have been developed within the hitherto mostly separate areas...... of graphical models and genetics. The potential of graphical models is explored and illustrated through a number of example applications where the genetic element is substantial or dominating....

Placement of empty catheters for an HDR-emulating LDR prostate brachytherapy technique: comparison to standard intraoperative planning.

Science.gov (United States)

Niedermayr, Thomas R; Nguyen, Paul L; Murciano-Goroff, Yonina R; Kovtun, Konstantin A; Neubauer Sugar, Emily; Cail, Daniel W; O'Farrell, Desmond A; Hansen, Jorgen L; Cormack, Robert A; Buzurovic, Ivan; Wolfsberger, Luciant T; O'Leary, Michael P; Steele, Graeme S; Devlin, Philip M; Orio, Peter F

2014-01-01

We sought to determine whether placing empty catheters within the prostate and then inverse planning iodine-125 seed locations within those catheters (High Dose Rate-Emulating Low Dose Rate Prostate Brachytherapy [HELP] technique) would improve concordance between planned and achieved dosimetry compared with a standard intraoperative technique. We examined 30 consecutive low dose rate prostate cases performed by standard intraoperative technique of planning followed by needle placement/seed deposition and compared them to 30 consecutive low dose rate prostate cases performed by the HELP technique. The primary endpoint was concordance between planned percentage of the clinical target volume that receives at least 100% of the prescribed dose/dose that covers 90% of the volume of the clinical target volume (V100/D90) and the actual V100/D90 achieved at Postoperative Day 1. The HELP technique had superior concordance between the planned target dosimetry and what was actually achieved at Day 1 and Day 30. Specifically, target D90 at Day 1 was on average 33.7 Gy less than planned for the standard intraoperative technique but was only 10.5 Gy less than planned for the HELP technique (p 0.05). Placing empty needles first and optimizing the plan to the known positions of the needles resulted in improved concordance between the planned and the achieved dosimetry to the target, possibly because of elimination of errors in needle placement. Copyright © 2014 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

New problem with sales, inventories, and operations planning in a supply chain environment

Science.gov (United States)

Thomas, Andre; Lamouri, Samir

2000-10-01

The highest level of planning and control system is necessary, because production and logistics systems are not so flexible to follow, from day to day, sales evolutions. The companies are therefore held to standardize the good practices concerning the elaboration of their Sales, Inventories and Operations Planning (SIOP). The SIOP makes it possible to implement the strategic objectives defined by Top Management at the time of the Business Plan. It is the link between sales and manufacturing planning. The objectives of each of those depend on the specificity of their trade: the Sales Department will go for a maximum sales whereas Production will endeavor to keep industrial cost prices as low as possible while the Finance Department will try to optimize the use of available funds. There are several tools for this optimization: Graphical method and linear programming. Today, the economic context requires robust optimization.

Childhood trauma in the graphic memoir

OpenAIRE

Beskow, Sara H.

2011-01-01

In this thesis I examine why the graphic memoir has become such a popular platform for authors to explore their childhood, and how these authors use graphic memoirs in an attempt to understand any trauma that they experienced during their formative years. Graphic memoirs in this context allow for a dual outlet to express these complex traumatic events, both through vivid illustrations and descriptive text. To illustrate how graphic memoirs are used as an outlet for traumatic experiences I hav...

76 FR 23630 - Office of New Reactors; Proposed Revision 2 to Standard Review Plan, Section 1.0 on Introduction...

Science.gov (United States)

2011-04-27

... Standard Review Plan, Section 1.0 on Introduction and Interfaces AGENCY: Nuclear Regulatory Commission (NRC... Revision 2 to Standard Review Plan (SRP), Section 1.0, ``Introduction and Interfaces'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML110110573). The Office of New Reactors (NRO...

Graphic Design Career Guide 2. Revised Edition.

Science.gov (United States)

Craig, James

The graphic design field is diverse and includes many areas of specialization. This guide introduces students to career opportunities in graphic design. The guide is organized in four parts. "Part One: Careers in Graphic Design" identifies and discusses the various segments of the graphic design industry, including: Advertising, Audio-Visual, Book…

Interactive orbital proximity operations planning system

Science.gov (United States)

Grunwald, Arthur J.; Ellis, Stephen R.

1990-01-01

An interactive graphical planning system for on-site planning of proximity operations in the congested multispacecraft environment about the space station is presented. The system shows the astronaut a bird's eye perspective of the space station, the orbital plane, and the co-orbiting spacecraft. The system operates in two operational modes: (1) a viewpoint mode, in which the astronaut is able to move the viewpoint around in the orbital plane to range in on areas of interest; and (2) a trajectory design mode, in which the trajectory is planned. Trajectory design involves the composition of a set of waypoints which result in a fuel-optimal trajectory which satisfies all operational constraints, such as departure and arrival constraints, plume impingement constraints, and structural constraints. The main purpose of the system is to present the trajectory and the constraints in an easily interpretable graphical format. Through a graphical interactive process, the trajectory waypoints are edited until all operational constraints are satisfied. A series of experiments was conducted to evaluate the system. Eight airline pilots with no prior background in orbital mechanics participated in the experiments. Subject training included a stand-alone training session of about 6 hours duration, in which the subjects became familiar with orbital mechanics concepts and performed a series of exercises to familiarize themselves with the control and display features of the system. They then carried out a series of production runs in which 90 different trajectory design situations were randomly addressed. The purpose of these experiments was to investigate how the planning time, planning efforts, and fuel expenditures were affected by the planning difficulty. Some results of these experiments are presented.

The Case for Graphic Novels

OpenAIRE

Steven Hoover

2012-01-01

Many libraries and librarians have embraced graphic novels. A number of books, articles, and presentations have focused on the history of the medium and offered advice on building and maintaining collections, but very little attention has been given the question of how integrate graphic novels into a library’s instructional efforts. This paper will explore the characteristics of graphic novels that make them a valuable resource for librarians who focus on research and information literacy i...

Graphics and visualization principles & algorithms

CERN Document Server

Theoharis, T; Platis, Nikolaos; Patrikalakis, Nicholas M

2008-01-01

Computer and engineering collections strong in applied graphics and analysis of visual data via computer will find Graphics & Visualization: Principles and Algorithms makes an excellent classroom text as well as supplemental reading. It integrates coverage of computer graphics and other visualization topics, from shadow geneeration and particle tracing to spatial subdivision and vector data visualization, and it provides a thorough review of literature from multiple experts, making for a comprehensive review essential to any advanced computer study.-California Bookw

Graphic Communications. Curriculum Guide.

Science.gov (United States)

North Dakota State Board for Vocational Education, Bismarck.

This guide provides the basic foundation to develop a one-semester course based on the cluster concept, graphic communications. One of a set of six guides for an industrial arts curriculum at the junior high school level, it suggests exploratory experiences designed to (1) develop an awareness and understanding of the drafting and graphic arts…

76 FR 31381 - Office Of New Reactors; Proposed Revision 4 to Standard Review Plan; Section 8.1 on Electric...

Science.gov (United States)

2011-05-31

... Standard Review Plan; Section 8.1 on Electric Power--Introduction AGENCY: U.S. Nuclear Regulatory...,'' on a proposed Revision 4 to Standard Review Plan (SRP), Section 8.1 on ``Electric Power--Introduction,'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML111180542). The previous version of...

Cartooning History: Canada's Stories in Graphic Novels

Science.gov (United States)

King, Alyson E.

2012-01-01

In recent years, historical events, issues, and characters have been portrayed in an increasing number of non-fiction graphic texts. Similar to comics and graphic novels, graphic texts are defined as fully developed, non-fiction narratives told through panels of sequential art. Such non-fiction graphic texts are being used to teach history in…

Patients’ handling of a standardized medication plan: a pilot study and method development

Directory of Open Access Journals (Sweden)

Botermann L

2016-04-01

Full Text Available Lea Botermann,1,2 Katrin Krueger,1 Christiane Eickhoff,1 Charlotte Kloft,2 Martin Schulz1–31Department of Medicine, ABDA – Federal Union of German Associations of Pharmacists, Berlin, 2Department of Clinical Pharmacy and Biochemistry, Institute of Pharmacy, Freie Universitaet Berlin, Berlin, 3Department of Pharmacology, Goethe-University Frankfurt, Frankfurt am Main, GermanyPurpose: The Action Plan for Medication Safety by the German Federal Ministry of Health introduced a standardized medication plan (MP, a printable document for the patient. The practical handling needs to be tested before the nationwide implementation in Germany. Therefore, the aims of our study were 1 to develop an instrument to evaluate the usage of the standardized MP, 2 to assess if patients can locate, and 3 understand important information. Moreover, we explored patients’ opinion and suggestions regarding the standardized MP template.Patients and methods: We conducted a cross-sectional study to evaluate the practical handling of the standardized MP. We interviewed 40 adult patients in seven community pharmacies in Germany, who took at least five medicines regularly and gave their written informed consent. The interview consisted of questions regarding finding and understanding information provided on a mock-up MP, patients’ opinion and the execution of the information on the MP by filling pill boxes. We eventually developed a new evaluation method to quantify the practical handling of the MP by rating the pill boxes filled by the patients.Results: Overall, the participants rated the MP positively. Thirty-nine (98% participants found important information on a mock-up standardized MP. Patients were questioned to identify if they understood information on medical intake as it relates to meals. In particular, they were questioned about medicine intake “1 hour before a meal”, which 98% (n=39 interpreted correctly, and “during a meal”, which 100% (n=40

Stereoscopic 3D graphics generation

Science.gov (United States)

Li, Zhi; Liu, Jianping; Zan, Y.

1997-05-01

Stereoscopic display technology is one of the key techniques of areas such as simulation, multimedia, entertainment, virtual reality, and so on. Moreover, stereoscopic 3D graphics generation is an important part of stereoscopic 3D display system. In this paper, at first, we describe the principle of stereoscopic display and summarize some methods to generate stereoscopic 3D graphics. Secondly, to overcome the problems which came from the methods of user defined models (such as inconvenience, long modifying period and so on), we put forward the vector graphics files defined method. Thus we can design more directly; modify the model simply and easily; generate more conveniently; furthermore, we can make full use of graphics accelerator card and so on. Finally, we discuss the problem of how to speed up the generation.

Graphical user interfaces for McCellan Nuclear Radiation Center (MNRC)

International Nuclear Information System (INIS)

Brown-VanHoozer, S. A.

1998-01-01

McClellan's Nuclear Radiation Center (MNRC) control console is in the process of being replaced due to spurious scrams, outdated software, and obsolete parts. The intent of the new control console is to eliminate the existing problems by installing a UNIX-based computer system with industry-standard interface software and incorporating human factors during all stages of the graphical user interface (GUI) development and control console design

Wide-angle display developments by computer graphics

Science.gov (United States)

Fetter, William A.

1989-01-01

Computer graphics can now expand its new subset, wide-angle projection, to be as significant a generic capability as computer graphics itself. Some prior work in computer graphics is presented which leads to an attractive further subset of wide-angle projection, called hemispheric projection, to be a major communication media. Hemispheric film systems have long been present and such computer graphics systems are in use in simulators. This is the leading edge of capabilities which should ultimately be as ubiquitous as CRTs (cathode-ray tubes). These assertions are not from degrees in science or only from a degree in graphic design, but in a history of computer graphics innovations, laying groundwork by demonstration. The author believes that it is timely to look at several development strategies, since hemispheric projection is now at a point comparable to the early stages of computer graphics, requiring similar patterns of development again.

Career Opportunities in Computer Graphics.

Science.gov (United States)

Langer, Victor

1983-01-01

Reviews the impact of computer graphics on industrial productivity. Details the computer graphics technician curriculum at Milwaukee Area Technical College and the cooperative efforts of business and industry to fund and equip the program. (SK)

Narrative Problems of Graphic Design History.

Science.gov (United States)

Margolin, Victor

1994-01-01

Discusses three major accounts (by Philip Meggs, Enric Satue and Richard Hollis) of graphic design history. Notes that these texts address the history of graphic design, but each raises questions about what material to include, as well as how graphic design is both related to and distinct from other visual practices such as typography, art…

What Does It Take to Be a Successful Graphic Designer: A Phenomenological Study on Graphic Design Curriculum

Science.gov (United States)

Beller, Shannon

2017-01-01

This study examined the phenomenon of what it takes to be a successful graphic designer. With an identity crisis in graphic design education, design curriculum is faced with uncertainties. With the diversity of programs and degrees in graphic design, the competencies and skills developed among the various programs reflect different purposes, thus…

A basic study for development of environmental standard review plan of Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Chung, Chang Hyun; Cho, Jae Seon; You, Young Woo [Seoul Nationl Univ., Seoul (Korea, Republic of)] (and others)

1999-12-15

In this study is performed a basic study to be ready for the development and detail analysis of NUREG-1555 ESRP. As a fundamental research for literature survey and development of draft review plan, review and translation of NUREG-1555 published by NRC, and which is applied to licensing procedure of Nuclear Power Plants are included. These provided the basic information for the developments of the environmental standard review plan.

Standard format and content for emergency plans for fuel cycle and materials facilities

International Nuclear Information System (INIS)

1990-09-01

This regulatory guides is being developed to provide guidance acceptable to the NRC staff on the information to be included in emergency plans and to establish a format for presenting the information. Use of a standard format will help ensure uniformity and completeness in the preparation of emergency plans. An acceptable emergency plan should describe the licensed activities conducted at the facility and the types of accidents that might occur. It should provide information on classifying postulated accidents and the licensee's procedures for notifying and coordinating with offsite authorities. The plan should provide information on emergency response measures that might be necessary, the equipment and facilities available to respond to an emergency, and how the licensee will maintain emergency preparedness capability. It should describe the records and reports that will be maintained. There should also be a section on recovery after an accident and plans for restoring the facility to a safe condition. 4 refs

An Enhanced Graphical User Interface for Analyzing the Vulnerability of Electrical Power Systems to Terrorist Attacks

National Research Council Canada - National Science Library

Stathakos, Dimitrios

2003-01-01

...) Conforming to Windows standards, the new OD GUI incorporates advanced graphical features, which help the user visualize the model and understand the consequences of interdiction The new ODs also...

Free, cross-platform gRaphical software

DEFF Research Database (Denmark)

Dethlefsen, Claus

2006-01-01

-recursive graphical models, and models defined using the BUGS language. Today, there exists a wide range of packages to support the analysis of data using graphical models. Here, we focus on Open Source software, making it possible to extend the functionality by integrating these packages into more general tools. We...... will attempt to give an overview of the available Open Source software, with focus on the gR project. This project was launched in 2002 to make facilities in R for graphical modelling. Several R packages have been developed within the gR project both for display and analysis of graphical models...

Graphic organizers and their effects on the reading comprehension of students with LD: a synthesis of research.

Science.gov (United States)

Kim, Ae-Hwa; Vaughn, Sharon; Wanzek, Jeanne; Wei, Shangjin

2004-01-01

Previous research studies examining the effects of graphic organizers on reading comprehension for students with learning disabilities (LD) are reviewed. An extensive search of the professional literature between 1963 and June 2001 yielded a total of 21 group design intervention studies that met the criteria for inclusion in the synthesis. Using graphic organizers (i.e., semantic organizers, framed outlines, cognitive maps with and without a mnemonic) was associated with improved reading comprehension overall for students with LD. Compared to standardized reading measures, researcher-developed comprehension measures were associated with higher effect sizes. Initial gains demonstrated when using graphic organizers were not revealed during later comprehension tasks or on new comprehension tasks.

Animated GIFs as vernacular graphic design

DEFF Research Database (Denmark)

Gürsimsek, Ödül Akyapi

2016-01-01

and often a mix of some of these modes, seem to enable participatory conversations by the audience communities that continue over a period of time. One example of such multimodal digital content is the graphic format called the animated GIF (graphics interchange format). This article focuses on content......Online television audiences create a variety of digital content on the internet. Fans of television production design produce and share such content to express themselves and engage with the objects of their interest. These digital expressions, which exist in the form of graphics, text, videos...... as design, both in the sense that multimodal meaning making is an act of design and in the sense that web-based graphics are designed graphics that are created through a design process. She specifically focuses on the transmedia television production entitled Lost and analyzes the design of animated GIFs...

Standard Review Plan Update and Development Program. Implementing Procedures Document

Energy Technology Data Exchange (ETDEWEB)

1992-05-01

This implementing procedures document (IPD) was prepared for use in implementing tasks under the standard review plan update and development program (SRP-UDP). The IPD provides comprehensive guidance and detailed procedures for SRP-UDP tasks. The IPD is mandatory for contractors performing work for the SRP-UDP. It is guidance for the staff. At the completion of the SRP-UDP, the IPD will be revised (to remove the UDP aspects) and will replace NRR Office Letter No. 800 as long-term maintenance procedures.

Standard format and content for radiological contingency plans for fuel cycle and materials facilities. Regulatory report

International Nuclear Information System (INIS)

1981-07-01

This report is issued as guidance to those fuel cycle and major materials licensees who are required by the NRC to prepare and submit a radiological contingency plan. This Standard Format has been prepared to help assure uniformity and completeness in the preparation of those plans

Graphical interpretation of numerical model results

International Nuclear Information System (INIS)

Drewes, D.R.

1979-01-01

Computer software has been developed to produce high quality graphical displays of data from a numerical grid model. The code uses an existing graphical display package (DISSPLA) and overcomes some of the problems of both line-printer output and traditional graphics. The software has been designed to be flexible enough to handle arbitrarily placed computation grids and a variety of display requirements

Development of a graphical user interface and graphics display for the WIND system

International Nuclear Information System (INIS)

O'Steen, B.L.; Fast, J.D.; Suire, B.S.

1992-01-01

An advanced graphical user interface (GUI) and improved graphics for transport calculations have been developed for the Weather Information and Display System (WINDS). Two WINDS transport codes, Area Evac and 2DPUF, have been ported from their original VAX/VMS environment to a UNIX operating system and reconfigured to take advantage of the new graphics capability. A developmental prototype of this software is now available on a UNIX based IBM 340 workstation in the Dose Assessment Center (DAC). Automatic transfer of meteorological data from the WINDS VAX computers to the IBM workstation in the DAC has been implemented. This includes both regional National Weather Service (NWS) data and SRS tower data. The above developments fulfill a FY 1993 DOE milestone

Computer graphics testbed to simulate and test vision systems for space applications

Science.gov (United States)

Cheatham, John B.

1991-01-01

Artificial intelligence concepts are applied to robotics. Artificial neural networks, expert systems and laser imaging techniques for autonomous space robots are being studied. A computer graphics laser range finder simulator developed by Wu has been used by Weiland and Norwood to study use of artificial neural networks for path planning and obstacle avoidance. Interest is expressed in applications of CLIPS, NETS, and Fuzzy Control. These applications are applied to robot navigation.

Graphic filter library implemented in CUDA language

OpenAIRE

Peroutková, Hedvika

2009-01-01

This thesis deals with the problem of reducing computation time of raster image processing by parallel computing on graphics processing unit. Raster image processing thereby refers to the application of graphic filters, which can be applied in sequence with different settings. This thesis evaluates the suitability of using parallelization on graphic card for raster image adjustments based on multicriterial choice. Filters are implemented for graphics processing unit in CUDA language. Opacity ...

FPGA Implementation of a Simple 3D Graphics Pipeline

Directory of Open Access Journals (Sweden)

Vladimir Kasik

2015-01-01

Full Text Available Conventional methods for computing 3D projects are nowadays usually implemented on standard or graphics processors. The performance of these devices is limited especially by the used architecture, which to some extent works in a sequential manner. In this article we describe a project which utilizes parallel computation for simple projection of a wireframe 3D model. The algorithm is optimized for a FPGA-based implementation. The design of the numerical logic is described in VHDL with the use of several basic IP cores used especially for computing trigonometric functions. The implemented algorithms allow smooth rotation of the model in two axes (azimuth and elevation and a change of the viewing angle. Tests carried out on a FPGA Xilinx Spartan-6 development board have resulted in real-time rendering at over 5000fps. In the conclusion of the article, we discuss additional possibilities for increasing the computational output in graphics applications via the use of HPC (High Performance Computing.

RadShield: semiautomated shielding design using a floor plan driven graphical user interface.

Science.gov (United States)

DeLorenzo, Matthew C; Wu, Dee H; Yang, Kai; Rutel, Isaac B

2016-09-08

The purpose of this study was to introduce and describe the development of RadShield, a Java-based graphical user interface (GUI), which provides a base design that uniquely performs thorough, spatially distributed calculations at many points and reports the maximum air-kerma rate and barrier thickness for each barrier pursuant to NCRP Report 147 methodology. Semiautomated shielding design calculations are validated by two approaches: a geometry-based approach and a manual approach. A series of geometry-based equations were derived giv-ing the maximum air-kerma rate magnitude and location through a first derivative root finding approach. The second approach consisted of comparing RadShield results with those found by manual shielding design by an American Board of Radiology (ABR)-certified medical physicist for two clinical room situations: two adjacent catheterization labs, and a radiographic and fluoroscopic (R&F) exam room. RadShield's efficacy in finding the maximum air-kerma rate was compared against the geometry-based approach and the overall shielding recommendations by RadShield were compared against the medical physicist's shielding results. Percentage errors between the geometry-based approach and RadShield's approach in finding the magnitude and location of the maximum air-kerma rate was within 0.00124% and 14 mm. RadShield's barrier thickness calculations were found to be within 0.156 mm lead (Pb) and 0.150 mm lead (Pb) for the adjacent catheteriza-tion labs and R&F room examples, respectively. However, within the R&F room example, differences in locating the most sensitive calculation point on the floor plan for one of the barriers was not considered in the medical physicist's calculation and was revealed by the RadShield calculations. RadShield is shown to accurately find the maximum values of air-kerma rate and barrier thickness using NCRP Report 147 methodology. Visual inspection alone of the 2D X-ray exam distribution by a medical physicist may not

Intercoder Reliability of Mapping Between Pharmaceutical Dose Forms in the German Medication Plan and EDQM Standard Terms.

Science.gov (United States)

Sass, Julian; Becker, Kim; Ludmann, Dominik; Pantazoglou, Elisabeth; Dewenter, Heike; Thun, Sylvia

2018-01-01

A nationally uniform medication plan has recently been part of German legislation. The specification for the German medication plan was developed in cooperation between various stakeholders of the healthcare system. Its' goal is to enhance usability and interoperability while also providing patients and physicians with the necessary information they require for a safe and high-quality therapy. Within the research and development project named Medication Plan PLUS, the specification of the medication plan was tested and reviewed for semantic interoperability in particular. In this study, the list of pharmaceutical dose forms provided in the specification was mapped to the standard terms of the European Directorate for the Quality of Medicines & HealthCare by different coders. The level of agreement between coders was calculated using Cohen's Kappa (κ). Results show that less than half of the dose forms could be coded with EDQM standard terms. In addition to that Kappa was found to be moderate, which means rather unconvincing agreement among coders. In conclusion, there is still vast room for improvement in utilization of standardized international vocabulary and unused potential considering cross-border eHealth implementations in the future.

Software for graphic display systems

International Nuclear Information System (INIS)

Karlov, A.A.

1978-01-01

In this paper some aspects of graphic display systems are discussed. The design of a display subroutine library is described, with an example, and graphic dialogue software is considered primarily from the point of view of the programmer who uses a high-level language. (Auth.)

75 FR 69709 - Office of New Reactors; Notice of Availability of the Final Staff Guidance; Standard Review Plan...

Science.gov (United States)

2010-11-15

... the Final Staff Guidance; Standard Review Plan, Section 13.6.6, Revision 0 on Cyber Security Plan... Reports for Nuclear Power Plants,'' Section 13.6.6, Revision 0 on ``Cyber Security Plan'' (Agencywide... reviews to amendments to licenses for operating reactors or for activities associated with review of...

OAP- OFFICE AUTOMATION PILOT GRAPHICS DATABASE SYSTEM

Science.gov (United States)

Ackerson, T.

1994-01-01

The Office Automation Pilot (OAP) Graphics Database system offers the IBM PC user assistance in producing a wide variety of graphs and charts. OAP uses a convenient database system, called a chartbase, for creating and maintaining data associated with the charts, and twelve different graphics packages are available to the OAP user. Each of the graphics capabilities is accessed in a similar manner. The user chooses creation, revision, or chartbase/slide show maintenance options from an initial menu. The user may then enter or modify data displayed on a graphic chart. The cursor moves through the chart in a "circular" fashion to facilitate data entries and changes. Various "help" functions and on-screen instructions are available to aid the user. The user data is used to generate the graphics portion of the chart. Completed charts may be displayed in monotone or color, printed, plotted, or stored in the chartbase on the IBM PC. Once completed, the charts may be put in a vector format and plotted for color viewgraphs. The twelve graphics capabilities are divided into three groups: Forms, Structured Charts, and Block Diagrams. There are eight Forms available: 1) Bar/Line Charts, 2) Pie Charts, 3) Milestone Charts, 4) Resources Charts, 5) Earned Value Analysis Charts, 6) Progress/Effort Charts, 7) Travel/Training Charts, and 8) Trend Analysis Charts. There are three Structured Charts available: 1) Bullet Charts, 2) Organization Charts, and 3) Work Breakdown Structure (WBS) Charts. The Block Diagram available is an N x N Chart. Each graphics capability supports a chartbase. The OAP graphics database system provides the IBM PC user with an effective means of managing data which is best interpreted as a graphic display. The OAP graphics database system is written in IBM PASCAL 2.0 and assembler for interactive execution on an IBM PC or XT with at least 384K of memory, and a color graphics adapter and monitor. Printed charts require an Epson, IBM, OKIDATA, or HP Laser

Hierarchical data structures for graphics program languages

International Nuclear Information System (INIS)

Gonauser, M.; Schinner, P.; Weiss, J.

1978-01-01

Graphic data processing with a computer makes exacting demands on the interactive capability of the program language and the management of the graphic data. A description of the structure of a graphics program language which has been shown by initial practical experiments to possess a particularly favorable interactive capability is followed by the evaluation of various data structures (list, tree, ring) with respect to their interactive capability in processing graphics. A practical structure is proposed. (orig.) [de

Data structures, computer graphics, and pattern recognition

CERN Document Server

Klinger, A; Kunii, T L

1977-01-01

Data Structures, Computer Graphics, and Pattern Recognition focuses on the computer graphics and pattern recognition applications of data structures methodology.This book presents design related principles and research aspects of the computer graphics, system design, data management, and pattern recognition tasks. The topics include the data structure design, concise structuring of geometric data for computer aided design, and data structures for pattern recognition algorithms. The survey of data structures for computer graphics systems, application of relational data structures in computer gr

An Alternate Graphical Representation of Periodic table of Chemical Elements

OpenAIRE

Abubakr, Mohd

2009-01-01

Periodic table of chemical elements symbolizes an elegant graphical representation of symmetry at atomic level and provides an overview on arrangement of electrons. It started merely as tabular representation of chemical elements, later got strengthened with quantum mechanical description of atomic structure and recent studies have revealed that periodic table can be formulated using SO(4,2)* SU(2) group. IUPAC, the governing body in Chemistry, doesn't approve any periodic table as a standard...

Picturing Illness: History, Poetics, and Graphic Medicine

Directory of Open Access Journals (Sweden)

Raghavi Ravi Kasthuri

2015-05-01

Full Text Available Comics have often been treated as a juvenile and sub-literary art form; however, taking cues from the new-found cultural acceptance of comics, particularly with the publication of Art Spiegelman’s Maus (1986, Chris Ware’s Jimmy Corrigan: The Smartest Kid on Earth (2000, and Alison Bechdel’s Fun Home: A Family Tragedy (2006, there have emerged, over the past decade, a new breed of comics dealing with the patient/caregivers’ experiences, perspectives and identities. Christened as graphic medicine, these illness narratives use comics as a medium to address wide ranging disease/illness related issues. The present review examines the following issues: What is graphic medicine? Is there a tangible relationship between underground comics and graphic medicine? If so, can we regard underground comics as historical precedent to graphic medicine? What are the uses of comics in medicine? Broadly put, drawing examples from various graphic medical narratives, the paper seeks to trace the history and poetics of graphic medicine.

Plan for implementing EPA standards for UMTRA sites

International Nuclear Information System (INIS)

1984-01-01

The Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA), authorizes the Department of Energy (DOE) to undertake remedial actions at 24 DOE designated processing sites. The term ''processing site,'' by statutory definition, means the inactive uranium mill or processing site and any other real property or improvement which is in the vicinity of the mill or processing site and is determined to be contaminated with residual radioactive materials derived from the mill or processing site. For purposes of this document, the inactive mill or processing site is referred to as the ''processing site'' and the other real property or improvement in the vicinity of such site is referred to as a 'vicinity property.'' The purpose of the remedial actions is to stabilize and control the uranium mill tailings and other residual radioactive materials in a safe and environmentally sound manner. Remedial actions undertaken by DOE are to be accomplished: With the full participation of the affected states and Indian tribes, in accordance with standards issued by the Environmental Protection Agency (EPA), and with the concurrence of the Nuclear Regulatory Commission (NRC). This plan is designed to be a generic presentation on methodology that will be followed in implementing the EPA standards. 5 refs., 1 tab

VQone MATLAB toolbox: A graphical experiment builder for image and video quality evaluations: VQone MATLAB toolbox.

Science.gov (United States)

Nuutinen, Mikko; Virtanen, Toni; Rummukainen, Olli; Häkkinen, Jukka

2016-03-01

This article presents VQone, a graphical experiment builder, written as a MATLAB toolbox, developed for image and video quality ratings. VQone contains the main elements needed for the subjective image and video quality rating process. This includes building and conducting experiments and data analysis. All functions can be controlled through graphical user interfaces. The experiment builder includes many standardized image and video quality rating methods. Moreover, it enables the creation of new methods or modified versions from standard methods. VQone is distributed free of charge under the terms of the GNU general public license and allows code modifications to be made so that the program's functions can be adjusted according to a user's requirements. VQone is available for download from the project page (http://www.helsinki.fi/psychology/groups/visualcognition/).

Graphics Education Survey. Part II.

Science.gov (United States)

Ernst, Sandra B.

After a 1977 survey reflected the importance of graphics education for news students, a study was developed to investigate the state of graphics education in the whole field of journalism. A questionnaire was sent to professors and administrators in four print-oriented professional fields of education: magazine, advertising, public relations, and…

NAGC Pre-K-Grade 12 Gifted Education Programming Standards: A Guide to Planning and Implementing High-Quality Services

Science.gov (United States)

Johnsen, Susan K., Ed.

2012-01-01

The new Pre-K-Grade 12 Gifted Education Programming Standards should be part of every school district's repertoire of standards to ensure that the learning needs of advanced students are being met. "NAGC Pre-K-Grade 12 Gifted Education Programming Standards: A Guide to Planning and Implementing High-Quality Services" details six standards that…

Standard format and content for emergency plans for fuel-cycle and materials facilities: Draft report for comment

International Nuclear Information System (INIS)

1987-11-01

This report is issued as guidance to those fuel-cycle and major materials licensees who are required by the NRC to prepare and submit an emergency plan. This Standard Format has been prepared to help ensure uniformity and completeness in the preparation of those plans

Graphical modelling software in R - status

DEFF Research Database (Denmark)

Detlefsen, Claus; Højsgaard, Søren; Lauritzen, Steffen L

2007-01-01

Graphical models in their modern form have been around for nearly a quarter of a century.  Various computer programs for inference in graphical models have been developed over that period. Some examples of free software programs are BUGS (Thomas 1994), CoCo (Badsberg2001), Digram (Klein, Keiding......, and Kreiner 1995), MIM (Edwards  2000), and Tetrad (Glymour, Scheines, Spirtes, and Kelley 1987). The gR initiative (Lauritzen 2002) aims at making graphical models available in R (R Development Core Team 2006). A small grant from the Danish Science Foundation supported this initiative. We will summarize...... the results of the initiative so far. Specifically we will illustrate some of the R packages for graphical modelling currently on CRAN and discuss their strengths and weaknesses....

Graphic Notation in Music Therapy: A Discussion of What to Notate in Graphic Notation and How

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

2009-01-01

This article presents graphic notations of music and related forms of communication in music therapy contexts, created by different authors and practitioners. Their purposes, objects of description, and the elements of graphic language are reflected upon in a comparative discussion. From...... that it becomes clear that the aspect of overview is a fundamental one, facilitating perception of complex data. This also makes possible to memorise complex data, extending the natural limits of human memory. Discovering hidden aspects in the clinical data, as well as sharing and communicating these aspects...... are also important concerns. Among the authors discussed, there is a large variety both in goals and methods. Keywords are proposed to circumscribe moments of possible interest connected to graphic notations. I suggest that the discipline of graphic notation can be useful for the grounding of music therapy...

Lamb wave propagation modelling and simulation using parallel processing architecture and graphical cards

International Nuclear Information System (INIS)

Paćko, P; Bielak, T; Staszewski, W J; Uhl, T; Spencer, A B; Worden, K

2012-01-01

This paper demonstrates new parallel computation technology and an implementation for Lamb wave propagation modelling in complex structures. A graphical processing unit (GPU) and computer unified device architecture (CUDA), available in low-cost graphical cards in standard PCs, are used for Lamb wave propagation numerical simulations. The local interaction simulation approach (LISA) wave propagation algorithm has been implemented as an example. Other algorithms suitable for parallel discretization can also be used in practice. The method is illustrated using examples related to damage detection. The results demonstrate good accuracy and effective computational performance of very large models. The wave propagation modelling presented in the paper can be used in many practical applications of science and engineering. (paper)

Graphical programming: On-line robot simulation for telerobotic control

International Nuclear Information System (INIS)

McDonald, M.J.; Palmquist, R.D.

1993-01-01

Sandia has developed an advanced operational control system approach, caged Graphical Programming, to design and operate robotic waste cleanup and other hazardous duty robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. The Graphical Programming approach uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Progranuning Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control. This paper describes the Graphical Programming approach, several example control systems that use Graphical Programming, and key features necessary for implementing successful Graphical Programming systems

Struggling readers learning with graphic-rich digital science text: Effects of a Highlight & Animate Feature and Manipulable Graphics

Science.gov (United States)

Defrance, Nancy L.

Technology offers promise of 'leveling the playing field' for struggling readers. That is, instructional support features within digital texts may enable all readers to learn. This quasi-experimental study examined the effects on learning of two support features, which offered unique opportunities to interact with text. The Highlight & Animate Feature highlighted an important idea in prose, while simultaneously animating its representation in an adjacent graphic. It invited readers to integrate ideas depicted in graphics and prose, using each one to interpret the other. The Manipulable Graphics had parts that the reader could operate to discover relationships among phenomena. It invited readers to test or refine the ideas that they brought to, or gleaned from, the text. Use of these support features was compulsory. Twenty fifth grade struggling readers read a graphic-rich digital science text in a clinical interview setting, under one of two conditions: using either the Highlight & Animate Feature or the Manipulable Graphics. Participants in both conditions made statistically significant gains on a multiple choice measure of knowledge of the topic of the text. While there were no significant differences by condition in the amount of knowledge gained; there were significant differences in the quality of knowledge expressed. Transcripts revealed that understandings about light and vision, expressed by those who used the Highlight & Animate Feature, were more often conceptually and linguistically 'complete.' That is, their understandings included both a description of phenomena as well as an explanation of underlying scientific principles, which participants articulated using the vocabulary of the text. This finding may be attributed to the multiple opportunities to integrate graphics (depicting the behavior of phenomena) and prose (providing the scientific explanation of that phenomena), which characterized the Highlight & Animate Condition. Those who used the

Graphic Journeys: Graphic Novels' Representations of Immigrant Experiences

Science.gov (United States)

Boatright, Michael D.

2010-01-01

This article explores how immigrant experiences are represented in the narratives of three graphic novels published in the last decade: Tan's (2007) "The Arrival," Kiyama's (1931/1999) "The Four Immigrants Manga: A Japanese Experience in San Francisco, 1904-1924," and Yang's (2006) "American Born Chinese." Through a theoretical lens informed by…

Oklahoma's Mobile Computer Graphics Laboratory.

Science.gov (United States)

McClain, Gerald R.

This Computer Graphics Laboratory houses an IBM 1130 computer, U.C.C. plotter, printer, card reader, two key punch machines, and seminar-type classroom furniture. A "General Drafting Graphics System" (GDGS) is used, based on repetitive use of basic coordinate and plot generating commands. The system is used by 12 institutions of higher education…

The Mission Operations Planning Assistant

Science.gov (United States)

Schuetzle, James G.

1987-01-01

The Mission Operations Planning Assistant (MOPA) is a knowledge-based system developed to support the planning and scheduling of instrument activities on the Upper Atmospheric Research Satellite (UARS). The MOPA system represents and maintains instrument plans at two levels of abstraction in order to keep plans comprehensible to both UARS Principal Investigators and Command Management personnel. The hierarchical representation of plans also allows MOPA to automatically create detailed instrument activity plans from which spacecraft command loads may be generated. The MOPA system was developed on a Symbolics 3640 computer using the ZetaLisp and ART languages. MOPA's features include a textual and graphical interface for plan inspection and modification, recognition of instrument operational constraint violations during the planning process, and consistency maintenance between the different planning levels. This paper describes the current MOPA system.

CONSIDERATIONS ABOUT APPLICATION OF GRAPHICAL CALCULUS

Directory of Open Access Journals (Sweden)

Anghel Alina Angelica

2015-06-01

Full Text Available Some typical engineering problems can be solved using graphical methods in an integrated way for knowledge of design, mathematics, mechanics and physics. This paper presents some graphical methods which improve student’s performances on streigth of intuitive interpretation, visualization and understanding solutions of engineering problems. The increased use of graphical methods adds another layer of interpretation to a given task requiring the coordination of different knowledge, in order to produce a correct solution and to improve the product design.

Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

Science.gov (United States)

Graydon, Patrick J.; Holloway, C. Michael

2015-01-01

We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

Computer Graphics and Administrative Decision-Making.

Science.gov (United States)

Yost, Michael

1984-01-01

Reduction in prices now makes it possible for almost any institution to use computer graphics for administrative decision making and research. Current and potential uses of computer graphics in these two areas are discussed. (JN)

Q-Technique and Graphics Research.

Science.gov (United States)

Kahle, Roger R.

Because Q-technique is as appropriate for use with visual and design items as for use with words, it is not stymied by the topics one is likely to encounter in graphics research. In particular Q-technique is suitable for studying the so-called "congeniality" of typography, for various copytesting usages, and for multivariate graphics research. The…

Standard review plan on antitrust reviews. Final report

International Nuclear Information System (INIS)

Lambe, W.M.; Davis, M.J.

1997-12-01

This standard review plan describes the procedures used by NRC staff to implement the antitrust review and enforcement provisions in Sections 105 and 186 of the Atomic Energy Act of 1954, as amended (the Act), and replaces NUREG-0970. These procedures are principally derived from the Commission's Rules and Regulations in 10 CFR Sections 2.101, 2.102, Part 2-Appendix A, Section X, 50.33a, 50.80, 50.90, and 52.77. These procedures set forth the steps and criteria the staff uses in antitrust reviews of construction permit applications, operating license applications, combined construction permit/operating license applications, combined construction permit/operating license applications, and applications for approval of the transfer of construction permits, operating licenses, and combined licenses. In addition, the procedures describe how the staff enforces compliance with antitrust conditions appended to licenses

Computer communications and graphics for clinical radiology

International Nuclear Information System (INIS)

Rhodes, M.L.; Azzawi, Y.; Tivattanasuk, E.S.; Pang, A.T.; Ly, K.; Panicker, H.

1985-01-01

Computer graphics has many forms. When applied in medicine, it can range from simple two dimensional charts and graphs to rendering of three-dimensional scenes. Computer graphic displays of molecular or large anatomic structures have been used to great advantage by numerous medical researchers. In addition, graphic presentations can be dynamic where displays are controlled by physician-user commands, or the presentations can be static, where views are recorded in discrete frames for later distribution or permanent archival. In medicine both interactive and static forms of computer graphics have their proper place in the effective delivery of health care. Computer graphics, however, changes constantly in the area of software techniques, hardware improvements and its clinical application. What may be medically appropriate today in the use of computer graphics can soon become inadequate and well behind the new advances that so quickly follow. In this paper the key feature of computer communication is discussed that aids in the clinical utility of computer graphics in medicine. It is distribution. Distribution in terms of instantaneous computer graphic software updates and more importantly, distribution of meaningful three-dimensional presentations to referring physicians. Physicians who, working in their private offices, have no routine access to medical work stations. In this environment three dimensional presentations of anatomy are static in nature, but must deliver realistic views of critical structures. This paper outlines how computer communication provides the essential ingredient to the provision of this service. As an illustration, the electronic distribution of software to generate three dimensional views of complex anatomoic structures is discussed. Sample views are included

Computer-Based Tools for Evaluating Graphical User Interfaces

Science.gov (United States)

Moore, Loretta A.

1997-01-01

The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.

Microcomputer Simulated CAD for Engineering Graphics.

Science.gov (United States)

Huggins, David L.; Myers, Roy E.

1983-01-01

Describes a simulated computer-aided-graphics (CAD) program at The Pennsylvania State University. Rationale for the program, facilities, microcomputer equipment (Apple) used, and development of a software package for simulating applied engineering graphics are considered. (JN)

Interactive Graphic Journalism

Directory of Open Access Journals (Sweden)

Laura Schlichting

2016-12-01

Full Text Available This paper examines graphic journalism (GJ in a transmedial context, and argues that transmedial graphic journalism (TMGJ is an important and fruitful new form of visual storytelling, that will re-invigorate the field of journalism, as it steadily tests out and plays with new media, ultimately leading to new challenges in both the production and reception process. With TMGJ, linear narratives may be broken up and ethical issues concerning the emotional and entertainment value are raised when it comes to ‘playing the news’. The aesthetic characteristics of TMGJ will be described and interactivity’s influence on non-fiction storytelling will be explored in an analysis of The Nisoor Square Shooting (2011 and Ferguson Firsthand (2015.

Configurable software for satellite graphics

Energy Technology Data Exchange (ETDEWEB)

Hartzman, P D

1977-12-01

An important goal in interactive computer graphics is to provide users with both quick system responses for basic graphics functions and enough computing power for complex calculations. One solution is to have a distributed graphics system in which a minicomputer and a powerful large computer share the work. The most versatile type of distributed system is an intelligent satellite system in which the minicomputer is programmable by the application user and can do most of the work while the large remote machine is used for difficult computations. At New York University, the hardware was configured from available equipment. The level of system intelligence resulted almost completely from software development. Unlike previous work with intelligent satellites, the resulting system had system control centered in the satellite. It also had the ability to reconfigure software during realtime operation. The design of the system was done at a very high level using set theoretic language. The specification clearly illustrated processor boundaries and interfaces. The high-level specification also produced a compact, machine-independent virtual graphics data structure for picture representation. The software was written in a systems implementation language; thus, only one set of programs was needed for both machines. A user can program both machines in a single language. Tests of the system with an application program indicate that is has very high potential. A major result of this work is the demonstration that a gigantic investment in new hardware is not necessary for computing facilities interested in graphics.

Graphic user interface for COSMOS code

International Nuclear Information System (INIS)

Oh, Je Yong; Koo, Yang Hyun; Lee, Byung Ho; Cheon, Jin Sik; Sohn, Dong Seong

2003-06-01

The Graphic User Interface (GUI) - which consisted of graphical elements such as windows, menu, button, icon, and so on - made it possible that the computer could be easily used for common users. Hence, the GUI was introduced to improve the efficiency to input parameters in COSMOS code. The functions to output graphs on the screen and postscript files were also added. And the graph library can be applied to the other codes. The details of principles of GUI and graphic library were described in the report

FASTPLOT, Interface Routines to MS FORTRAN Graphics Library

International Nuclear Information System (INIS)

1999-01-01

1 - Description of program or function: FASTPLOT is a library of routines that can be used to interface with the Microsoft FORTRAN Graphics library (GRAPHICS.LIB). The FASTPLOT routines simplify the development of graphics applications and add capabilities such as histograms, Splines, symbols, and error bars. FASTPLOT also includes routines that can be used to create menus. 2 - Methods: FASTPLOT is a library of routines which must be linked with a user's FORTRAN programs that call any FASTPLOT routines. In addition, the user must link with the Microsoft FORTRAN Graphics library (GRAPHICS.LIB). 3 - Restrictions on the complexity of the problem: None noted

Engineering graphics data entry for space station data base

Science.gov (United States)

Lacovara, R. C.

1986-01-01

The entry of graphical engineering data into the Space Station Data Base was examined. Discussed were: representation of graphics objects; representation of connectivity data; graphics capture hardware; graphics display hardware; site-wide distribution of graphics, and consolidation of tools and hardware. A fundamental assumption was that existing equipment such as IBM based graphics capture software and VAX networked facilities would be exploited. Defensible conclusions reached after study and simulations of use of these systems at the engineering level are: (1) existing IBM based graphics capture software is an adequate and economical means of entry of schematic and block diagram data for present and anticipated electronic systems for Space Station; (2) connectivity data from the aforementioned system may be incorporated into the envisioned Space Station Data Base with modest effort; (3) graphics and connectivity data captured on the IBM based system may be exported to the VAX network in a simple and direct fashion; (4) graphics data may be displayed site-wide on VT-125 terminals and lookalikes; (5) graphics hard-copy may be produced site-wide on various dot-matrix printers; and (6) the system may provide integrated engineering services at both the engineering and engineering management level.

Graphic notation

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

2010-01-01

Graphic notation is taught to music therapy students at Aalborg University in both simple and elaborate forms. This is a method of depicting music visually, and notations may serve as memory aids, as aids for analysis and reflection, and for communication purposes such as supervision or within...

LCFM - LIVING COLOR FRAME MAKER: PC GRAPHICS GENERATION AND MANAGEMENT TOOL FOR REAL-TIME APPLICATIONS

Science.gov (United States)

Truong, L. V.

1994-01-01

Computer graphics are often applied for better understanding and interpretation of data under observation. These graphics become more complicated when animation is required during "run-time", as found in many typical modern artificial intelligence and expert systems. Living Color Frame Maker is a solution to many of these real-time graphics problems. Living Color Frame Maker (LCFM) is a graphics generation and management tool for IBM or IBM compatible personal computers. To eliminate graphics programming, the graphic designer can use LCFM to generate computer graphics frames. The graphical frames are then saved as text files, in a readable and disclosed format, which can be easily accessed and manipulated by user programs for a wide range of "real-time" visual information applications. For example, LCFM can be implemented in a frame-based expert system for visual aids in management of systems. For monitoring, diagnosis, and/or controlling purposes, circuit or systems diagrams can be brought to "life" by using designated video colors and intensities to symbolize the status of hardware components (via real-time feedback from sensors). Thus status of the system itself can be displayed. The Living Color Frame Maker is user friendly with graphical interfaces, and provides on-line help instructions. All options are executed using mouse commands and are displayed on a single menu for fast and easy operation. LCFM is written in C++ using the Borland C++ 2.0 compiler for IBM PC series computers and compatible computers running MS-DOS. The program requires a mouse and an EGA/VGA display. A minimum of 77K of RAM is also required for execution. The documentation is provided in electronic form on the distribution medium in WordPerfect format. A sample MS-DOS executable is provided on the distribution medium. The standard distribution medium for this program is one 5.25 inch 360K MS-DOS format diskette. The contents of the diskette are compressed using the PKWARE archiving tools

Interactive voxel graphics in virtual reality

Science.gov (United States)

Brody, Bill; Chappell, Glenn G.; Hartman, Chris

2002-06-01

Interactive voxel graphics in virtual reality poses significant research challenges in terms of interface, file I/O, and real-time algorithms. Voxel graphics is not so new, as it is the focus of a good deal of scientific visualization. Interactive voxel creation and manipulation is a more innovative concept. Scientists are understandably reluctant to manipulate data. They collect or model data. A scientific analogy to interactive graphics is the generation of initial conditions for some model. It is used as a method to test those models. We, however, are in the business of creating new data in the form of graphical imagery. In our endeavor, science is a tool and not an end. Nevertheless, there is a whole class of interactions and associated data generation scenarios that are natural to our way of working and that are also appropriate to scientific inquiry. Annotation by sketching or painting to point to and distinguish interesting and important information is very significant for science as well as art. Annotation in 3D is difficult without a good 3D interface. Interactive graphics in virtual reality is an appropriate approach to this problem.

A computer graphics pilot project - Spacecraft mission support with an interactive graphics workstation

Science.gov (United States)

Hagedorn, John; Ehrner, Marie-Jacqueline; Reese, Jodi; Chang, Kan; Tseng, Irene

1986-01-01

The NASA Computer Graphics Pilot Project was undertaken to enhance the quality control, productivity and efficiency of mission support operations at the Goddard Operations Support Computing Facility. The Project evolved into a set of demonstration programs for graphics intensive simulated control room operations, particularly in connection with the complex space missions that began in the 1980s. Complex mission mean more data. Graphic displays are a means to reduce the probabilities of operator errors. Workstations were selected with 1024 x 768 pixel color displays controlled by a custom VLSI chip coupled to an MC68010 chip running UNIX within a shell that permits operations through the medium of mouse-accessed pulldown window menus. The distributed workstations run off a host NAS 8040 computer. Applications of the system for tracking spacecraft orbits and monitoring Shuttle payload handling illustrate the system capabilities, noting the built-in capabilities of shifting the point of view and rotating and zooming in on three-dimensional views of spacecraft.

Application of objective provision tree to development of standard review plan for sodium-cooled fast reactor nuclear design

Energy Technology Data Exchange (ETDEWEB)

Bae, Moo-Hoon; Suh, Namduk; Choi, Yongwon; Shin, Andong [Korea Institute of Nuclear Safety, Daejon (Korea, Republic of)

2016-06-15

A systematic methodology was developed for the standard review plan for sodium-cooled fast reactor nuclear design. The process is first to develop an objective provision tree of sodium-cooled fast reactor for the reactivity control safety function. The provision tree is generally developed by designer to confirm whether the design satisfies the defense-in-depth concept. Then applicability of the current standard review plan of nuclear design for light water reactor to sodium-cooled fast reactor was evaluated and complemented by the developed objective provision tree.

Computer-aided process planning in prismatic shape die components based on Standard for the Exchange of Product model data

Directory of Open Access Journals (Sweden)

Awais Ahmad Khan

2015-11-01

Full Text Available Insufficient technologies made good integration between the die components in design, process planning, and manufacturing impossible in the past few years. Nowadays, the advanced technologies based on Standard for the Exchange of Product model data are making it possible. This article discusses the three main steps for achieving the complete process planning for prismatic parts of the die components. These three steps are data extraction, feature recognition, and process planning. The proposed computer-aided process planning system works as part of an integrated system to cover the process planning of any prismatic part die component. The system is built using Visual Basic with EWDraw system for visualizing the Standard for the Exchange of Product model data file. The system works successfully and can cover any type of sheet metal die components. The case study discussed in this article is taken from a large design of progressive die.

Graphical passwords: a qualitative study of password patterns

CSIR Research Space (South Africa)

Vorster, J

2015-03-01

Full Text Available Graphical passwords schemas are becoming more main-stream. There are many different approaches to graphical passwords, each with its own drawbacks and advantages. There has been many studies to suggest that graphical passwords should be stronger...

Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This guide addresses the development of waste management plans for potential waste streams resulting from decommissioning activities at nuclear facilities, including identifying, categorizing, and handling the waste from generation to final disposal. 1.2 This guide is applicable to potential waste streams anticipated from decommissioning activities of nuclear facilities whose operations were governed by the Nuclear Regulatory Commission (NRC) or Agreement State license, under Department of Energy (DOE) Orders, or Department of Defense (DoD) regulations. 1.3 This guide provides a description of the key elements of waste management plans that if followed will successfully allow for the characterization, packaging, transportation, and off-site treatment or disposal, or both, of conventional, hazardous, and radioactive waste streams. 1.4 This guide does not address the on-site treatment, long term storage, or on-site disposal of these potential waste streams. 1.5 This standard does not purport to address ...

Introduction to regression graphics

CERN Document Server

Cook, R Dennis

2009-01-01

Covers the use of dynamic and interactive computer graphics in linear regression analysis, focusing on analytical graphics. Features new techniques like plot rotation. The authors have composed their own regression code, using Xlisp-Stat language called R-code, which is a nearly complete system for linear regression analysis and can be utilized as the main computer program in a linear regression course. The accompanying disks, for both Macintosh and Windows computers, contain the R-code and Xlisp-Stat. An Instructor's Manual presenting detailed solutions to all the problems in the book is ava

Some computer graphical user interfaces in radiation therapy.

Science.gov (United States)

Chow, James C L

2016-03-28

In this review, five graphical user interfaces (GUIs) used in radiation therapy practices and researches are introduced. They are: (1) the treatment time calculator, superficial X-ray treatment time calculator (SUPCALC) used in the superficial X-ray radiation therapy; (2) the monitor unit calculator, electron monitor unit calculator (EMUC) used in the electron radiation therapy; (3) the multileaf collimator machine file creator, sliding window intensity modulated radiotherapy (SWIMRT) used in generating fluence map for research and quality assurance in intensity modulated radiation therapy; (4) the treatment planning system, DOSCTP used in the calculation of 3D dose distribution using Monte Carlo simulation; and (5) the monitor unit calculator, photon beam monitor unit calculator (PMUC) used in photon beam radiation therapy. One common issue of these GUIs is that all user-friendly interfaces are linked to complex formulas and algorithms based on various theories, which do not have to be understood and noted by the user. In that case, user only needs to input the required information with help from graphical elements in order to produce desired results. SUPCALC is a superficial radiation treatment time calculator using the GUI technique to provide a convenient way for radiation therapist to calculate the treatment time, and keep a record for the skin cancer patient. EMUC is an electron monitor unit calculator for electron radiation therapy. Instead of doing hand calculation according to pre-determined dosimetric tables, clinical user needs only to input the required drawing of electron field in computer graphical file format, prescription dose, and beam parameters to EMUC to calculate the required monitor unit for the electron beam treatment. EMUC is based on a semi-experimental theory of sector-integration algorithm. SWIMRT is a multileaf collimator machine file creator to generate a fluence map produced by a medical linear accelerator. This machine file controls

Collaborating on a Graphic Medicine Novel

DEFF Research Database (Denmark)

Frølunde, Lisbeth

2018-01-01

The presentation centers on establishing creative collaborations to support the production of my graphic novel (Family Anecdotes) about mourning and mental health. I explore various challenges of authoring an “autobiofictional" graphic medicine novel – as an arts-based communication researcher, a...

Standardization of quality control plans for highway bridges in Europe: COST Action TU 1406

Science.gov (United States)

Casas, Joan R.; Matos, Jose Campos e.

2017-09-01

In Europe, as all over the world, the need to manage roadway bridges in an efficient way led to the development of different management systems. Hence, nowadays, many European countries have their own system. Although they present a similar architectural framework, several differences can be appointed. These differences constitute a divergent mechanism that may conduct to different decisions on maintenance actions. Within the roadway bridge management process, the identification of maintenance needs is more effective when developed in a uniform and repeatable manner. This process can be accomplished by the identification of performance indicators and definition of performance goals and key performance indicators (KPI), improving the planning of maintenance strategies. Therefore, a discussion at a European level, seeking to achieve a standardized approach in this subject, will bring significant benefits. Accordingly, a COST Action is under way in Europe with the aim of standardizing the establishment of quality control plans for roadway bridges.

PROFESSIONALLY ORIENTED COURSE OF ENGINEERING-GRAPHICAL TRAINING

Directory of Open Access Journals (Sweden)

Olga V. Zhuykova

2015-01-01

Full Text Available The aim of the article is to present the results of managing the competence oriented self-directed student learning while studying graphical subjects at Kalashnikov Izhevsk State Technical University.Methods. The technology of self-directed engineering-graphical training of future bachelors based on the analysis of educational literature and teaching experience, providing individualization and professional education is suggested. The method of team expert appraisal was used at all stages of self-directed learning management. This method is one of main in qualimetry (the science concerned with assessing and evaluating the quality of any objects and processes; it permits to reveal the components of engineering-graphical competence, to establish the criteria and markers of determining the level of its development, to perform expert evaluation of student tasks and estimation procedures.Results. It has been established that the revitalization of student selfdirected learning owing to professional education and individualization permits to increase the level of student engineering-graphical competence development. Scientific novelty. The criteria evaluation procedures for determining the level of student engineering-graphical competence development in the process of their professional oriented self-directed learning while studying graphical subjects at a technical university are developed.Practical significance. The professional-focused educational trajectories of independent engineering-graphic preparation of students are designed and substantially filled in content. Such training is being realised at the present time at Kalashnikov Izhevsk State Technical University, major «Instrument Engineering». 

VTGRAPH:Computer graphics program using ReGIS mode

International Nuclear Information System (INIS)

Benamar, M.A.; Benouali, N.; Tchantchane, A.; Azbouche, A.; Tobbeche, S. Centre de Developpement des Techniques Nucleaires, Laboratoire des Techniques Nucleaires, Algiers

1993-02-01

A computer graphics program has been developed for plotting spectra generated from different nuclear analysis techniques and discrete data for the VT240 graphics and compatible IBM PC using ST240 configuration. We have used the Remote Graphics Instruction Set (ReGIS) commands

Scientific and Graphic Design Foundations for C2

Science.gov (United States)

2007-06-01

the elements in the composition. This section presents a summary of the concepts in graphic design layout, typography , color, and data graphics ...document for ease of use 4 Graphic Design • Layout – Literally the aesthetic of the display design • Typography – Serif versus san serif – Font sizes...12th ICCRTS “Adapting C2 to the 21st Century” Title: Scientific and graphic design foundations for C2 Topics: C2 Concepts, Theory and

Anthroposcenes: Towards an Environmental Graphic Novel

Directory of Open Access Journals (Sweden)

Laura Perry

2018-02-01

Full Text Available In this article, I consider how two contemporary graphic novels, Richard McGuire’s 'Here' (2015 and Lauren Redniss’s 'Radioactive' (2010, take up the challenge posed by the Anthropocene to represent both geologic and human scales. I argue that graphic novels prove a fruitful site for investigating the capacities of both visual art and literature to respond to such a refiguring of the boundaries of the human subject and narrative. While the most commercially popular and frequently studied texts in climate fiction tend to be novels or films, I turn from considering the patterns of genre fiction to the affordances of form. I explore how the conceptual and aesthetic frameworks of the graphic novel form encompass environmental phenomena that are often difficult to visualize elsewhere, stretching beyond human perspectives. In particular, I show how the aesthetics of temporality, or visual time, in graphic novels encourages readings that take notice of the nonhuman presence in plots and narrative events. In arguing for the environmental, more-than-human implications of visual time in the graphic novel form, I focus on how representations of domestic habits and daily routines in 'Here' and 'Radioactive' are articulated within and implicated by unruly scales of time and space (too small and too large to contain. I argue that the aesthetics of time in the form of the graphic novel address representational challenges central to the Anthropocene, environmental justice, and slow violence, in particular, the mediation between the planetary and the domestic.

Operator-assisted planning and execution of proximity operations subject to operational constraints

Science.gov (United States)

Grunwald, Arthur J.; Ellis, Stephen R.

1991-01-01

Future multi-vehicle operations will involve multiple scenarios that will require a planning tool for the rapid, interactive creation of fuel-efficient trajectories. The planning process must deal with higher-order, non-linear processes involving dynamics that are often counter-intuitive. The optimization of resulting trajectories can be difficult to envision. An interaction proximity operations planning system is being developed to provide the operator with easily interpreted visual feedback of trajectories and constraints. This system is hosted on an IRIS 4D graphics platform and utilizes the Clohessy-Wiltshire equations. An inverse dynamics algorithm is used to remove non-linearities while the trajectory maneuvers are decoupled and separated in a geometric spreadsheet. The operator has direct control of the position and time of trajectory waypoints to achieve the desired end conditions. Graphics provide the operator with visualization of satisfying operational constraints such as structural clearance, plume impingement, approach velocity limits, and arrival or departure corridors. Primer vector theory is combined with graphical presentation to improve operator understanding of suggested automated system solutions and to allow the operator to review, edit, or provide corrective action to the trajectory plan.

77 FR 43405 - Final Standard Review Plan, Branch Technical Position 7-19 on Guidance for Evaluation of...

Science.gov (United States)

2012-07-24

... in the Standard Review Plan (SRP), Chapter 7, for those standard reactor designs that have not been... methods: Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2010... search, select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems...

Graphics Technology Study. Volume 1. State of Graphics Technology

Science.gov (United States)

1986-12-01

reaction of special heat sensitive paper when exposed to the heated elements of a thermal print head. Copy quality was poor due to characteristics...Vendors are now attempting to offer smaller units aimed at applications such as typography , graphic arts, CAD, and office automation. The key element in

A 3D computer graphics approach to brachytherapy planning.

Science.gov (United States)

Weichert, Frank; Wawro, Martin; Wilke, Carsten

2004-06-01

Intravascular brachytherapy (IVB) can significantly reduce the risk of restenosis after interventional treatment of stenotic arteries, if planned and applied correctly. In order to facilitate computer-based IVB planning, a three-dimensional reconstruction of the stenotic artery based on intravascular ultrasound (IVUS) sequences is desirable. For this purpose, the frames of the IVUS sequence are properly aligned in space, possible gaps inbetween the IVUS frames are filled by interpolation with radial basis functions known from scattered data interpolation. The alignment procedure uses additional information which is obtained from biplane X-ray angiography performed simultaneously during the capturing of the IVUS sequence. After IVUS images and biplane angiography data are acquired from the patient, the vessel-wall borders and the IVUS catheter are detected by an active contour algorithm. Next, the twist (relative orientation) between adjacent IVUS frames is determined by a sequential triangulation method. The absolute orientation of each frame is established by a stochastic analysis based on anatomical landmarks. Finally, the reconstructed 3D vessel model is visualized by methods of combined volume and polygon rendering. The reconstruction is then used for the computation of the radiation-distribution within the tissue, emitted from a beta-radiation source. All these steps are performed during the percutaneous intervention.

GRAPHICAL MODELS OF THE AIRCRAFT MAINTENANCE PROCESS

Directory of Open Access Journals (Sweden)

Stanislav Vladimirovich Daletskiy

2017-01-01

Full Text Available The aircraft maintenance is realized by a rapid sequence of maintenance organizational and technical states, its re- search and analysis are carried out by statistical methods. The maintenance process concludes aircraft technical states con- nected with the objective patterns of technical qualities changes of the aircraft as a maintenance object and organizational states which determine the subjective organization and planning process of aircraft using. The objective maintenance pro- cess is realized in Maintenance and Repair System which does not include maintenance organization and planning and is a set of related elements: aircraft, Maintenance and Repair measures, executors and documentation that sets rules of their interaction for maintaining of the aircraft reliability and readiness for flight. The aircraft organizational and technical states are considered, their characteristics and heuristic estimates of connection in knots and arcs of graphs and of aircraft organi- zational states during regular maintenance and at technical state failure are given. It is shown that in real conditions of air- craft maintenance, planned aircraft technical state control and maintenance control through it, is only defined by Mainte- nance and Repair conditions at a given Maintenance and Repair type and form structures, and correspondingly by setting principles of Maintenance and Repair work types to the execution, due to maintenance, by aircraft and all its units mainte- nance and reconstruction strategies. The realization of planned Maintenance and Repair process determines the one of the constant maintenance component. The proposed graphical models allow to reveal quantitative correlations between graph knots to improve maintenance processes by statistical research methods, what reduces manning, timetable and expenses for providing safe civil aviation aircraft maintenance.

What you see is what you feel : on the simulation of touch in graphical user interfaces

NARCIS (Netherlands)

Mensvoort, van K.M.

2009-01-01

This study introduces a novel method of simulating touch with merely visual means. Interactive animations are used to create an optical illusion that evokes haptic percepts like stickiness, stiffness and mass, within a standard graphical user interface. The technique, called optically simulated

Science and Math Lesson Plans to Meet the Ohio Revised Science Standards and the Next Generation of Standards for Today; Technology (Excel

Directory of Open Access Journals (Sweden)

Suzanne Lunsford

2015-02-01

Full Text Available Pre-service teachers (K-12 developed and taught lesson plans that met the state and national science and technology standards by integrating Excel and PowerPoint into their lesson. A sample of 74 pre-service teachers in our science education program were required to integrate technology (Excel as they developed science and math lesson plans with graphing as a requirement. These students took pre-test and post-test (n=74 to determine their understanding of Excel in relation to the need of current technology for todays' science classroom. The test results showed that students obtained content gains in Excel graphing in all the inquiry-based lab experiments. They also gained experience in developing math skills, inquiry-based science lesson plans, and communication and presentation skills.

Computer Series, 3: Computer Graphics for Chemical Education.

Science.gov (United States)

Soltzberg, Leonard J.

1979-01-01

Surveys the current scene in computer graphics from the point of view of a chemistry educator. Discusses the scope of current applications of computer graphics in chemical education, and provides information about hardware and software systems to promote communication with vendors of computer graphics equipment. (HM)

Graphic Organizers: Outlets for Your Thoughts.

Science.gov (United States)

Ekhaml, Leticia

1998-01-01

Graphs, bars, charts, and diagrams have been used by designers, writers, and scientists to communicate. Now, research suggests that graphic organizers benefit teaching and learning. This article describes graphic organizers: sequential, conceptual, hierarchical, cyclical, Venn, fishbone or Ishikawa, squeeze and stretch, why-why, t-chart, KWL…

Adolescents' Motivations for Viewing Graphic Horror.

Science.gov (United States)

Johnston, Deirdre D.

1995-01-01

Identifies four motivations adolescents report for viewing graphic horror films: gore watching, thrill watching, independent watching, and problem watching. Argues that viewing motivations are predictors of responses to graphic horror. Finds that viewing motivations were related to viewers' cognitive and affective responses and a tendency to…

Storyboard dalam Pembuatan Motion Graphic

OpenAIRE

Satrya Mahardhika; A.F. Choiril Anam Fathoni

2013-01-01

Motion graphics is one category in the animation that makes animation with lots of design elements in each component. Motion graphics needs long process including preproduction, production, and postproduction. Preproduction has an important role so that the next stage may provide guidance or instructions for the production process or the animation process. Preproduction includes research, making the story, script, screenplay, character, environment design and storyboards. The storyboard will ...

The graphics editor in ROOT

International Nuclear Information System (INIS)

Antcheva, Ilka; Brun, Rene; Hof, Carsten; Rademakers, Fons

2006-01-01

A well-designed Graphical User Interface (GUI) has critical importance in any computer application. The user interface is where the end users and the complex system intersect. An effective interface design can make a powerful and complex system, such as ROOT, easy and intuitive to learn and operate. This paper describes the main goals we defined and the design solution we found developing the graphics editor in ROOT

KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

Science.gov (United States)

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

Directory of Open Access Journals (Sweden)

Arnd Gross

Full Text Available BACKGROUND: Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav, SAS export (xpt or text file (dat, which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. RESULTS: On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. CONCLUSIONS: We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

Work plan for defining a standard inventory estimate for wastes stored in Hanford Site underground tanks

International Nuclear Information System (INIS)

Hodgson, K.M.

1996-01-01

This work plan addresses the Standard Inventory task scope, deliverables, budget, and schedule for fiscal year 1997. The goal of the Standard Inventory task is to resolve differences among the many reported Hanford Site tank waste inventory values and to provide inventory estimates that will serve as Standard Inventory values for all waste management and disposal activities. These best-basis estimates of chemicals and radionuclides will be reported on both a global and tank-specific basis and will be published in the Tank Characterization Database

Influence of graphic design of the text on reading quality of pupils with dyslexia

Directory of Open Access Journals (Sweden)

Zikl Pavel

2016-01-01

Full Text Available The contribution contains research results focused on reading quality of pupils with dyslexia according to the graphic design of the text. Our aim was to prove if commonly recommended graphic text editing has a certain influence on reading speed and occurrence of mistakes of children with dyslexia. The research sample consisted of pupils with dyslexia and a control group then selected in pairs of intact pupils of 4th and 5th class of primary school (in total 150 pupils. For the purpose of data collection there had been a text used in an unfamiliar language (a nonsensical text, which corresponds to the Czech language in its structure; is a part of standardized reading test. There were four text versions prepared for the research which had been modified into frequently recommended modifications for dyslexics (increased font size, a use of bigger gaps between words and also rows, syllables highlight in words and a standard text corresponding to common reading-books. Conclusion depicts a presentation of impacts of individual texts modifications and also subjective opinions of pupils about these texts.

Development Of 12 Head GAMMA Detection And Graphical Presentation Software Suitable For Industrial Process Investigation By Radiotracer Technique

International Nuclear Information System (INIS)

Saengchantr, Dhanaj; Chueinta, Siripone

2009-07-01

Full text: Data logging with prompt graphical presentation software accommodating gamma radiation signals from 12 scintillation detectors through standard RS-232 interface has been developed. Laboratory testing by detection of injected-mixed radioactive tracer in a fluid flowing inside a pipe was conducted. The radioactive mixed fluid passed through the detectors located at several points along the pipe and the generated signals correspond to the mass flow inside the pipe were recorded. Up to 10,000 data points of fast (20 millisecond) dwell time could be accumulated. Graphical presentation allowed fast interpretation while the output data were suitable for more accurate evaluation with standard software e.g. Residence Time Distribution (RTD), Computed Tomography Visualization. Further utilization in the industry, in conjunction with radiotracer techniques, for troubleshooting and process optimization will be further carried out

The Image of Daniel: An Ancient Graphic Organizer

Science.gov (United States)

Li, Loretta F.

2008-01-01

Teachers who use graphic organizers find that students' memory of important material is strengthened. Graphic organizers also lend themselves to the presentation of material in an interdisciplinary fashion. An example of a successful graphic organizer from religion and ancient history is the image of Nebuchadnezzar's dream that was interpreted by…

3D-CT vascular setting protocol using computer graphics for the evaluation of maxillofacial lesions

Directory of Open Access Journals (Sweden)

CAVALCANTI Marcelo de Gusmão Paraiso

2001-01-01

Full Text Available In this paper we present the aspect of a mandibular giant cell granuloma in spiral computed tomography-based three-dimensional (3D-CT reconstructed images using computer graphics, and demonstrate the importance of the vascular protocol in permitting better diagnosis, visualization and determination of the dimensions of the lesion. We analyzed 21 patients with maxillofacial lesions of neoplastic and proliferative origins. Two oral and maxillofacial radiologists analyzed the images. The usefulness of interactive 3D images reconstructed by means of computer graphics, especially using a vascular setting protocol for qualitative and quantitative analyses for the diagnosis, determination of the extent of lesions, treatment planning and follow-up, was demonstrated. The technique is an important adjunct to the evaluation of lesions in relation to axial CT slices and 3D-CT bone images.

3D-CT vascular setting protocol using computer graphics for the evaluation of maxillofacial lesions.

Science.gov (United States)

Cavalcanti, M G; Ruprecht, A; Vannier, M W

2001-01-01

In this paper we present the aspect of a mandibular giant cell granuloma in spiral computed tomography-based three-dimensional (3D-CT) reconstructed images using computer graphics, and demonstrate the importance of the vascular protocol in permitting better diagnosis, visualization and determination of the dimensions of the lesion. We analyzed 21 patients with maxillofacial lesions of neoplastic and proliferative origins. Two oral and maxillofacial radiologists analyzed the images. The usefulness of interactive 3D images reconstructed by means of computer graphics, especially using a vascular setting protocol for qualitative and quantitative analyses for the diagnosis, determination of the extent of lesions, treatment planning and follow-up, was demonstrated. The technique is an important adjunct to the evaluation of lesions in relation to axial CT slices and 3D-CT bone images.

Randomness in Contemporary Graphic Art

OpenAIRE

Zavřelová, Veronika

2016-01-01

Veronika Zavřelová Bachelor thesis Charles University in Prague, Faculty of Education, Department of Art Education Randomness in contemporary graphic art imaginative picture card game ANNOTATION This (bachelor) thesis concerns itself with a connection between verbal and visual character system within the topic of Randomness in contemporary graphic art - imaginative picture card game. The thesis is mainly based on the practical part - exclusively created card game Piktim. The card game uses as...

The challenge of simple graphics for multimodal studies

DEFF Research Database (Denmark)

Johannessen, Christian Mosbæk

2018-01-01

This article suggests that a Multimodal Social Semiotics (MSS) approach to graphics is severely challenged by structurally very simple texts. Methodologically, MSS favours the level at which elements from discrete modes are integrated grammatically into texts. Because the tradition has this focus......, the analytical description of the expression plane of many modes is underdeveloped. In the case of graphics, we have no descriptive or explanatory readiness for graphic form. The article aims to remedy this problem by combining (i) a small inventory of formal dichotomies for graphic shape features at a general...

Using Graphic Organizers in Intercultural Education

Science.gov (United States)

Ciascai, Liliana

2009-01-01

Graphic organizers are instruments of representation, illustration and modeling of information. In the educational practice they are used for building, and systematization of knowledge. Graphic organizers are instruments that addressed mostly visual learning style, but their use is beneficial to all learners. In this paper we illustrate the use of…

Making Art Connections with Graphic Organizers

Science.gov (United States)

Stephens, Pam; Hermus, Cindy

2007-01-01

Posters, slide shows, videos, diagrams, charts, written or illustrated class notes, daily logs, to do lists, and written instructions are all helpful modes of teaching for visual learners. Another form of instruction that is helpful for visual learners is the graphic organizers. Sometimes called "mind maps", graphic organizers are illustrative…

Spatial Ability through Engineering Graphics Education

Science.gov (United States)

Marunic, Gordana; Glazar, Vladimir

2013-01-01

Spatial ability has been confirmed to be of particular importance for successful engineering graphics education and to be a component of human intelligence that can be improved through instruction and training. Consequently, the creation and communication by means of graphics demand careful development of spatial skills provided by the balanced…

A Laboratory Application of Microcomputer Graphics.

Science.gov (United States)

Gehring, Kalle B.; Moore, John W.

1983-01-01

A PASCAL graphics and instrument interface program for a Z80/S-100 based microcomputer was developed. The computer interfaces to a stopped-flow spectrophotometer replacing a storage oscilloscope and polaroid camera. Applications of this system are discussed, indicating that graphics and analog-to-digital boards have transformed the computer into…

Introduction to Graphics Programming in Java

DEFF Research Database (Denmark)

Rosendahl, Mads

Writing graphics applications in Java using Swing can be quite a daunting experience which requires understanding of some large libraries, and fairly advanced aspects of Java. In these notes we will show that by using a small subset of the Swing package we can write a write range of graphics...

Mastering probabilistic graphical models using Python

CERN Document Server

Ankan, Ankur

2015-01-01

If you are a researcher or a machine learning enthusiast, or are working in the data science field and have a basic idea of Bayesian learning or probabilistic graphical models, this book will help you to understand the details of graphical models and use them in your data science problems.

A Call for Considering Color Vision Deficiency When Creating Graphics for Psychology Reports.

Science.gov (United States)

Frane, Andrew

2015-01-01

Although color vision deficiency (CVD) is fairly common, it is often not adequately considered when data is presented in color graphics. This study found that CVD tends to be mentioned neither in the author guidelines of psychology journals nor in the standard publication manuals of the field (e.g., the publication manuals of the American Psychological Association and the American Medical Association). To illustrate the relevance of this problem, a panel of scholars with CVD was used to evaluate the color figures in three respected psychological science journals. Results suggested that a substantial proportion of those figures were needlessly confusing for viewers with CVD and could have been easily improved through simple adjustments. Based on prior literature and on feedback from the panelists, recommendations are made for improving the accessibility of graphics in psychology reports.

The Effects of Computer Graphic Organizers on the Persuasive Writing of Hispanic Middle School Students with Specific Learning Disabilities

Science.gov (United States)

Unzueta, Caridad H.; Barbetta, Patricia M.

2012-01-01

A multiple baseline design investigated the effects of computer graphic organizers on the persuasive composition writing skills of four Hispanic students with specific learning disabilities. Participants reviewed the elements of persuasive writing and then developed compositions using a word processing program. Baseline planning was done with a…

Experience from implementing international standards in national emergency response planning national adjustments and suggestions for improvements

International Nuclear Information System (INIS)

Naadland Holo, E.

2003-01-01

Full text: A process has been going on for some time in Norway to establish a harmonized background for emergency response planning for any kind of nuclear or radiological accident. The national emergency preparedness organisation with the crisis committee for nuclear accident, consisting of representatives from civil defence, defence, police-, health-, and food control authorities, has the authority to implement countermeasures to protect health, environment and national interests in case of an accident or in case of nuclear terrorism. However, in an early phase, the response plans need to be fully harmonized to ensure that every operational level knows their responsibility and the responsibilities of others. Our intention is to implement the IAEA standard 'preparedness and response for a nuclear or radiological emergency'. We believe this will simplify national and international communication and also simplify the crisis management if an accident occurs. In revising the national plans, and also the planning basis at regional and local level, as well as the planning basis for response to accidents at national nuclear facilities and in connection with arrival of nuclear submarines in Norwegian harbours, we have seen the need to make national adjustments to the international standards. In addition to the standard, there exist several other processes and routines for reporting different kinds of incidents. We have seen a need to coordinate this internally at the competent authority to simplify the routines. This paper will focus on the challenges we have met, our national solutions and some suggestions for simplification. National adjustments to the international standard. - Firstly, the threat categorization needs to be adjusted. First of all, we do not have nuclear power plants in Norway. In the aftermath of 11 September 2001 we also have focused more an the potential for nuclear terrorism. Nuclear terrorism is unlikely but puts up some new requirements in the

77 FR 12086 - Final Staff Guidance, Revision 4 to Standard Review Plan; Section 8.1 on Electric Power-Introduction

Science.gov (United States)

2012-02-28

... Plan; Section 8.1 on Electric Power--Introduction AGENCY: Nuclear Regulatory Commission. [[Page 12087... Nuclear Power Plants,'' Standard Review Plan (SRP) Section 8.1 on ``Electric Power--Introduction,'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML113640121), and the Branch...

Graphical user interfaces for McClellan Nuclear Radiation Center

International Nuclear Information System (INIS)

Brown-VanHoozer, S.A.; Power, M.; Forsmann, H.

1998-01-01

The control console of the TRIGA reactor at McClellan's Nuclear Radiation Center (MNRC) is in the process of being replaced because of spurious scrams, outdated software, and obsolete parts. The intent of the new control console is to eliminate the existing problems by installing a UNIX-based computer system with industry-standard interface software and by incorporating human factors during all stages of the graphical user interface (GUI) development and control console design. This paper gives a brief description of some of the guidelines used in developing the MNRC's GUIs as continuous, real-time displays

Environmental Standard Review Plan for the review of license renewal applications for nuclear power plants

International Nuclear Information System (INIS)

O'Brien, J.; Kim, T.J.; Reynolds, S.

1991-08-01

The Environmental Standard Review Plan for the Review of License Applications for Nuclear Power Plants (ESRP-LR) is to be used by the NRC staff when performing environmental reviews of applications for the renewal of power reactor licenses. The use of the ESRP-LR provides a framework for the staff to determine whether or not environmental issues important to license renewal have been identified and the impacts evaluated and provides acceptance standards to help the reviewers comply with the National Environmental Policy Act

Graphical structure of many-particle transition operators

International Nuclear Information System (INIS)

Kowalski, K.L.

1983-01-01

A new graphical derivation is given of the nested Rosenberg equations which reveals the simple structural reasons for their validity. The graphical techniques are shown to apply in other contexts in nuclear reaction theory

Graphic design of pinhole cameras

Science.gov (United States)

Edwards, H. B.; Chu, W. P.

1979-01-01

The paper describes a graphic technique for the analysis and optimization of pinhole size and focal length. The technique is based on the use of the transfer function of optical elements described by Scott (1959) to construct the transfer function of a circular pinhole camera. This transfer function is the response of a component or system to a pattern of lines having a sinusoidally varying radiance at varying spatial frequencies. Some specific examples of graphic design are presented.

Graphical programming of telerobotic tasks

International Nuclear Information System (INIS)

Small, D.E.; McDonald, M.J.

1997-01-01

With a goal of producing faster, safer, and cheaper technologies for nuclear waste cleanup, Sandia is actively developing and extending intelligent systems technologies. Graphical Programming is a key technology for robotic waste cleanup that Sandia is developing for this goal. This paper describes Sancho, Sandia most advanced Graphical Programming supervisory software. Sancho, now operational on several robot systems, incorporates all of Sandia's recent advances in supervisory control. Sancho, developed to rapidly apply Graphical Programming on a diverse set of robot systems, uses a general set of tools to implement task and operational behavior. Sancho can be rapidly reconfigured for new tasks and operations without modifying the supervisory code. Other innovations include task-based interfaces, event-based sequencing, and sophisticated GUI design. These innovations have resulted in robot control programs and approaches that are easier and safer to use than teleoperation, off-line programming, or full automation

Fractal geometry and computer graphics

CERN Document Server

Sakas, Georgios; Peitgen, Heinz-Otto; Englert, Gabriele

1992-01-01

Fractal geometry has become popular in the last 15 years, its applications can be found in technology, science, or even arts. Fractal methods and formalism are seen today as a general, abstract, but nevertheless practical instrument for the description of nature in a wide sense. But it was Computer Graphics which made possible the increasing popularity of fractals several years ago, and long after their mathematical formulation. The two disciplines are tightly linked. The book contains the scientificcontributions presented in an international workshop in the "Computer Graphics Center" in Darmstadt, Germany. The target of the workshop was to present the wide spectrum of interrelationships and interactions between Fractal Geometry and Computer Graphics. The topics vary from fundamentals and new theoretical results to various applications and systems development. All contributions are original, unpublished papers.The presentations have been discussed in two working groups; the discussion results, together with a...

Exploiting graphics processing units for computational biology and bioinformatics.

Science.gov (United States)

Payne, Joshua L; Sinnott-Armstrong, Nicholas A; Moore, Jason H

2010-09-01

Advances in the video gaming industry have led to the production of low-cost, high-performance graphics processing units (GPUs) that possess more memory bandwidth and computational capability than central processing units (CPUs), the standard workhorses of scientific computing. With the recent release of generalpurpose GPUs and NVIDIA's GPU programming language, CUDA, graphics engines are being adopted widely in scientific computing applications, particularly in the fields of computational biology and bioinformatics. The goal of this article is to concisely present an introduction to GPU hardware and programming, aimed at the computational biologist or bioinformaticist. To this end, we discuss the primary differences between GPU and CPU architecture, introduce the basics of the CUDA programming language, and discuss important CUDA programming practices, such as the proper use of coalesced reads, data types, and memory hierarchies. We highlight each of these topics in the context of computing the all-pairs distance between instances in a dataset, a common procedure in numerous disciplines of scientific computing. We conclude with a runtime analysis of the GPU and CPU implementations of the all-pairs distance calculation. We show our final GPU implementation to outperform the CPU implementation by a factor of 1700.

TEKLIB, Tektronix Graphics Subroutine Library

International Nuclear Information System (INIS)

Wolf, M.L.

1987-01-01

1 - Description of program or function: TEKLIB is a library of subroutines that produces graphical output on all Tektronix terminals with model numbers from 4010 through 4115. The application program identifies the model number in the initialization subroutine, GRSTRT, and then uses this number as a flag throughout the run to tailor the graphical output to that specific device. Output includes lines, markers, text, polygons, and panels. Graphic input is supported on all terminals. 2 - Method of solution: TEKLIB uses two coordinate systems, viewport and world, to generate graphic images on the screen. Viewport coordinates refer to an imaginary rectangular grid on the display screen surface. The world coordinate system is a rectangular grid on any x-y plane, defined by the application program. The rectangular portion of the x-y plane specified, termed a w indow , is projected onto a rectangular region of the screen, called a v iewport . In addition to 2-D graphics, TEKLIB also provides subroutines for drawing projections of 3-D objects. The application program first defines a point in space to look at the v iew point , and the direction and distance from that point to the observer's position. A viewing transformation is performed on each x,y,z point to project it onto a v iew plane , a plane perpendicular to the line of sight and passing through the view point. This view plane then becomes the x-y plane of the world window which is mapped into the viewport. 3 - Restrictions on the complexity of the problem: TEKLIB does not attempt to emulate attributes such as line style and marker type in software if the terminal does not support those attributes in hardware

Planning Model of Physics Learning In Senior High School To Develop Problem Solving Creativity Based On National Standard Of Education

Science.gov (United States)

Putra, A.; Masril, M.; Yurnetti, Y.

2018-04-01

One of the causes of low achievement of student’s competence in physics learning in high school is the process which they have not been able to develop student’s creativity in problem solving. This is shown that the teacher’s learning plan is not accordance with the National Eduction Standard. This study aims to produce a reconstruction model of physics learning that fullfil the competency standards, content standards, and assessment standards in accordance with applicable curriculum standards. The development process follows: Needs analysis, product design, product development, implementation, and product evaluation. The research process involves 2 peers judgment, 4 experts judgment and two study groups of high school students in Padang. The data obtained, in the form of qualitative and quantitative data that collected through documentation, observation, questionnaires, and tests. The result of this research up to the product development stage that obtained the physics learning plan model that meets the validity of the content and the validity of the construction in terms of the fulfillment of Basic Competence, Content Standards, Process Standards and Assessment Standards.

Computer Graphics for Multimedia and Hypermedia Development.

Science.gov (United States)

Mohler, James L.

1998-01-01

Discusses several theoretical and technical aspects of computer-graphics development that are useful for creating hypermedia and multimedia materials. Topics addressed include primary bitmap attributes in computer graphics, the jigsaw principle, and raster layering. (MSE)

Mikado: A graphic program

Science.gov (United States)

Secretan, Y.

A discussion of the modular program Mikado is presented. Mikado was developed with the goal of creating a flexible graphic tool to display and help analyze the results of finite element fluid flow computations. Mikado works on unstructured meshes, with elements of mixed geometric type, but also offers the possibility of using structured meshes. The program can be operated by both menu and mouse (interactive), or by command file (batch). Mikado is written in FORTRAN, except for a few system dependent subroutines which are in C. It runs presently on Silicon Graphics' workstations and could be easily ported to the IBM-RISC System/6000 family of workstations.

General aviation design synthesis utilizing interactive computer graphics

Science.gov (United States)

Galloway, T. L.; Smith, M. R.

1976-01-01

Interactive computer graphics is a fast growing area of computer application, due to such factors as substantial cost reductions in hardware, general availability of software, and expanded data communication networks. In addition to allowing faster and more meaningful input/output, computer graphics permits the use of data in graphic form to carry out parametric studies for configuration selection and for assessing the impact of advanced technologies on general aviation designs. The incorporation of interactive computer graphics into a NASA developed general aviation synthesis program is described, and the potential uses of the synthesis program in preliminary design are demonstrated.

Selecting personnel to work on the interactive graphics system

International Nuclear Information System (INIS)

Norton, F.J.

1979-01-01

The paper established criteria for the selection of personnel to work on the interactive graphics system and mentions some of human behavioral patterns that are created by the implementation of graphic systems. Some of the social and educational problems associated with the interactive graphics system will be discussed. The project also provided for collecting objective data which would be useful in assessing the benefits of interactive graphics systems

Selecting personnel to work on the interactive graphics system

Energy Technology Data Exchange (ETDEWEB)

Norton, F.J.

1979-11-30

The paper established criteria for the selection of personnel to work on the interactive graphics system and mentions some of human behavioral patterns that are created by the implementation of graphic systems. Some of the social and educational problems associated with the interactive graphics system will be discussed. The project also provided for collecting objective data which would be useful in assessing the benefits of interactive graphics systems.

Computer-graphic visualization of dynamics

International Nuclear Information System (INIS)

Stewart, H.B.

1986-01-01

As engineered systems become increasingly sophisticated and complex, questions of efficiency, reliability, and safety demand the application of more powerful methods of analysis. One indication of this is the accelerating trend away from purely static or quasi-steady system modeling toward models that include essentially dynamic behavior. It is here that the qualitative ideas of nonlinear dynamics, dealing as they do with the most typical behavior in real dynamical systems, can be expected to play an increasingly prominent role. As part of a continuing investigation of the most important low-order differential equations, an interactive computer graphics environment has been created for the study of systems in three-dimensional phase space. This environment makes available the basic control of both numerical simulation and graphic visualization by a specially designed menu system. A key ingredient in this environment is the possibility of graphic communication not only from machine to man, but also from man to machine. Thus to specify the starting point for a numerical integration, for example, the user points to a location in phase space on the screen of the graphics terminal (using crosshairs or a mouse and cursor), bypassing the necessity to give numerical values of the phase-space coordinates. By devising a flexible computer interface which implements conceptual approaches to phase-space analysis of dynamical systems, significant advances in understanding of prototypical differential equations have been achieved

Future of motion graphics and particle systems

OpenAIRE

Warambo, Bryan

2012-01-01

The purpose of this research is to study the use of particle systems in motion graphics, which is known to be the most popular graphics tool for multiple animated elements. It is known to be a procedural animation because as the emitter builds up more particles are formed to create a motion effect. At the same time exploring the future of motion graphics and Particle systems connection and the relevance it has in terms of longevity in being a major post-production element in digital media. Th...

Teaching Graphics in Technical Communication Classes.

Science.gov (United States)

Spurgeon, Kristene C.

Perhaps because the United States is undergoing a video revolution, perhaps because of its increasing sales of goods to non-English speaking markets where graphics can help explain the products, perhaps because of the decreasing communication skills of the work force, graphic aids are becoming more and more widely used and more and more important.…

User-Extensible Graphics Using Abstract Structure,

Science.gov (United States)

1987-08-01

Flex 6 The Algol68 model of the graphical abstract structure 5 The creation of a PictureDefinition 6 The making of a picture from a PictureDefinition 7...data together with the operations that can be performed on that data. i 7! ś I _ § 4, The Alqol68 model of the graphical abstract structure Every

Development of the graphic design and control system based on a graphic simulator for the spent fuel dismantling equipment

Energy Technology Data Exchange (ETDEWEB)

Lee, J. Y.; Kim, S. H.; Song, T. G.; Yoon, J. S

2000-06-01

In this study, the graphic design system is developed for designing the spent fuel rod consolidation and the dismantling processes. This system is used throughout the design stages from the conceptual design to the motion analysis. Also, the real-time control system of the rod extracting equipment is developed. This system utilizes the graphic simulator which simulates the motion of the equipment in real time by synchronously connecting the control PC with the graphic server through the TCP/IP network. The developed system is expected to be used as an effective tool in designing the process equipment for the spent fuel management. And the real-time graphic control system can be effectively used to enhance the reliability and safety of the spent fuel handling process by providing the remote monitoring function of the process.

Development of the graphic design and control system based on a graphic simulator for the spent fuel dismantling equipment

International Nuclear Information System (INIS)

Lee, J. Y.; Kim, S. H.; Song, T. G.; Yoon, J. S.

2000-06-01

In this study, the graphic design system is developed for designing the spent fuel rod consolidation and the dismantling processes. This system is used throughout the design stages from the conceptual design to the motion analysis. Also, the real-time control system of the rod extracting equipment is developed. This system utilizes the graphic simulator which simulates the motion of the equipment in real time by synchronously connecting the control PC with the graphic server through the TCP/IP network. The developed system is expected to be used as an effective tool in designing the process equipment for the spent fuel management. And the real-time graphic control system can be effectively used to enhance the reliability and safety of the spent fuel handling process by providing the remote monitoring function of the process

The influence of annotation in graphical organizers

NARCIS (Netherlands)

Bezdan, Eniko; Kester, Liesbeth; Kirschner, Paul A.

2013-01-01

Bezdan, E., Kester, L., & Kirschner, P. A. (2012, 29-31 August). The influence of annotation in graphical organizers. Poster presented at the biannual meeting of the EARLI Special Interest Group Comprehension of Text and Graphics, Grenoble, France.

CORDSPW - Windows computer program package for graphical interpretation of CORD-2 data

International Nuclear Information System (INIS)

Slavic, S.; Kromar, M.

2007-01-01

The CORD-2 package, developed at Jozef Stefan Institute, enables determination of the core power distribution and reactivity. Core distributions data generated during the calculation process are stored in CORlib files. CORDSP code, which is a part of the CORD-2 package, displays and compares data contained in CORlib files. Since it runs in the DOS environment, there are several limitations in the presentation of desired data. A CORDSPW package runs in the Windows environment and offers better graphical interpretation of the CORlib data. Core distributions can be displayed, compared, rewritten in the new files and sent to the printer. The user can select the appropriate display of the presented data such as core symmetry, colour and fonts. Core radial and axial distributions can be presented and compared. There are several options to store and print data. The user can choose between standard ASCII and graphical JPG format. (author)

Investigating Creativity in Graphic Design Education from Psychological Perspectives

Directory of Open Access Journals (Sweden)

Salman Amur Alhajri

2017-01-01

Full Text Available The role of creativity in graphic design education has been a central aspect of graphic design education. The psychological component of creativity and its role in graphic design education has not been given much importance. The present research would attempt to study ‘creativity in graphic design education from psychological perspectives’. A thorough review of literature would be conducted on graphic design education, creativity and its psychological aspects. Creativity is commonly defined as a ‘problem solving’ feature in design education. Students of graphic design have to involve themselves in the identification of cultural and social elements. Instruction in the field of graphic design must be aimed at enhancing the creative abilities of the student. The notion that creativity is a cultural production is strengthened by the problem solving methods employed in all cultures. Most cultures regard creativity as a process which leads to the creation of something new. Based on this idea, a cross-cultural research was conducted to explore the concept of creativity from Arabic and Western perspective. From a psychological viewpoint, the student’s cognition, thinking patterns and habits also have a role in knowledge acquisition. The field of graphic design is not equipped with a decent framework which necessitates certain modes of instruction; appropriate to the discipline. The results of the study revealed that the psychological aspect of creativity needs to be adequately understood in order to enhance creativity in graphic design education.

HARMONICS SURFACES OF GRAPHIC TYPE IN R3

Directory of Open Access Journals (Sweden)

Carlos Carrión Riveros

2016-06-01

Full Text Available In this research we study harmonic surfaces immersed in R3. We dened Harmonic surfaces of graphic type and showed that a harmonious surface graphic type is minimal if and only if it is part of a plane or a helix. Also, we give a characterization of harmonic surfaces graphic type parameterized by asymptotic lines and some examples.

Fast DRR splat rendering using common consumer graphics hardware

International Nuclear Information System (INIS)

Spoerk, Jakob; Bergmann, Helmar; Wanschitz, Felix; Dong, Shuo; Birkfellner, Wolfgang

2007-01-01

Digitally rendered radiographs (DRR) are a vital part of various medical image processing applications such as 2D/3D registration for patient pose determination in image-guided radiotherapy procedures. This paper presents a technique to accelerate DRR creation by using conventional graphics hardware for the rendering process. DRR computation itself is done by an efficient volume rendering method named wobbled splatting. For programming the graphics hardware, NVIDIAs C for Graphics (Cg) is used. The description of an algorithm used for rendering DRRs on the graphics hardware is presented, together with a benchmark comparing this technique to a CPU-based wobbled splatting program. Results show a reduction of rendering time by about 70%-90% depending on the amount of data. For instance, rendering a volume of 2x10 6 voxels is feasible at an update rate of 38 Hz compared to 6 Hz on a common Intel-based PC using the graphics processing unit (GPU) of a conventional graphics adapter. In addition, wobbled splatting using graphics hardware for DRR computation provides higher resolution DRRs with comparable image quality due to special processing characteristics of the GPU. We conclude that DRR generation on common graphics hardware using the freely available Cg environment is a major step toward 2D/3D registration in clinical routine

A Graphical Adversarial Risk Analysis Model for Oil and Gas Drilling Cybersecurity

OpenAIRE

Vieira, Aitor Couce; Houmb, Siv Hilde; Insua, David Rios

2014-01-01

Oil and gas drilling is based, increasingly, on operational technology, whose cybersecurity is complicated by several challenges. We propose a graphical model for cybersecurity risk assessment based on Adversarial Risk Analysis to face those challenges. We also provide an example of the model in the context of an offshore drilling rig. The proposed model provides a more formal and comprehensive analysis of risks, still using the standard business language based on decisions, risks, and value.

A Server-Client-Based Graphical Development Environment for Physics Analyses (VISPA)

International Nuclear Information System (INIS)

Bretz, H-P; Erdmann, M; Fischer, R; Hinzmann, A; Klingebiel, D; Komm, M; Müller, G; Rieger, M; Steffens, J; Steggemann, J; Urban, M; Winchen, T

2012-01-01

The Visual Physics Analysis (VISPA) project provides a graphical development environment for data analysis. It addresses the typical development cycle of (re-)designing, executing, and verifying an analysis. We present the new server-client-based web application of the VISPA project to perform physics analyses via a standard internet browser. This enables individual scientists to work with a large variety of devices including touch screens, and teams of scientists to share, develop, and execute analyses on a server via the web interface.

Graphical calculus for Gaussian pure states

International Nuclear Information System (INIS)

Menicucci, Nicolas C.; Flammia, Steven T.; Loock, Peter van

2011-01-01

We provide a unified graphical calculus for all Gaussian pure states, including graph transformation rules for all local and semilocal Gaussian unitary operations, as well as local quadrature measurements. We then use this graphical calculus to analyze continuous-variable (CV) cluster states, the essential resource for one-way quantum computing with CV systems. Current graphical approaches to CV cluster states are only valid in the unphysical limit of infinite squeezing, and the associated graph transformation rules only apply when the initial and final states are of this form. Our formalism applies to all Gaussian pure states and subsumes these rules in a natural way. In addition, the term 'CV graph state' currently has several inequivalent definitions in use. Using this formalism we provide a single unifying definition that encompasses all of them. We provide many examples of how the formalism may be used in the context of CV cluster states: defining the 'closest' CV cluster state to a given Gaussian pure state and quantifying the error in the approximation due to finite squeezing; analyzing the optimality of certain methods of generating CV cluster states; drawing connections between this graphical formalism and bosonic Hamiltonians with Gaussian ground states, including those useful for CV one-way quantum computing; and deriving a graphical measure of bipartite entanglement for certain classes of CV cluster states. We mention other possible applications of this formalism and conclude with a brief note on fault tolerance in CV one-way quantum computing.

KMWin – A Convenient Tool for Graphical Presentation of Results from Kaplan-Meier Survival Time Analysis

Science.gov (United States)

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Background Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. Results On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. Conclusions We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups. PMID:22723912

An Agent Framework for Recognition of Graphic Units in Drawings

NARCIS (Netherlands)

Achten, H.H.; Jessurun, A.J.; Koszewski, K.; Wrona, S.

2002-01-01

Architects use graphic conventions in their drawings that have meaningful content to the design task. In previous work, such well-defined sets of graphic entities have been identified and defined. These sets are called graphic units. In this paper, we discuss how graphic unit recognition in drawings

Molten Salt Reactor Experiment Facility (Building 7503) standards/requirements identification document adherence assessment plan at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1996-02-01

This is the Phase 2 (adherence) assessment plan for the Building 7503 Molten Salt Reactor Experiment (MSRE) Facility standards/requirements identification document (S/RID). This document outlines the activities to be conducted from FY 1996 through FY 1998 to ensure that the standards and requirements identified in the MSRE S/RID are being implemented properly. This plan is required in accordance with the Department of Energy Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 90-2, November 9, 1994, Attachment 1A. This plan addresses the major aspects of the adherence assessment and will be consistent with Energy Systems procedure QA-2. 7 ''Surveillances.''

Acceptable standard format and content for the fundamental nuclear material control (FNMC) plan required for low-enriched uranium facilities. Revision 2

International Nuclear Information System (INIS)

Joy, D.R.

1995-12-01

This report documents a standard format suggested by the NRC for use in preparing fundamental nuclear material control (FNMC) plans as required by the Low Enriched Uranium Reform Amendments (10CFR 74.31). This report also describes the necessary contents of a comprehensive plan and provides example acceptance criteria which are intended to communicate acceptable means of achieving the performance capabilities of the Reform Amendments. By using the suggested format, the licensee or applicant will minimize administrative problems associated with the submittal, review and approval of the FNMC plan. Preparation of the plan in accordance with this format Will assist the NRC in evaluating the plan and in standardizing the review and licensing process. However, conformance with this guidance is not required by the NRC. A license applicant who employs a format that provides a equal level of completeness and detail may use their own format. This document is also intended for providing guidance to licensees when making revisions to their FNMC plan

TEK11 graphics user's guide

International Nuclear Information System (INIS)

Stewart, C.R. Jr.; Joubert, W.D.; Overbey, D.R.; Stewart, K.A.

1978-10-01

The TEK11 graphics library was written for use on PDP-11 minicomputers running the RT-11 operating system to drive Tektronix 4010 graphics display terminals. Library subroutines are coded in FORTRAN and assembly language. The library includes routines to draw axes, either linear or semilog, to plot data in terms of logical values without first scaling to screen coordinates, to label graphs, and to plot in a maximum of four regions on the screen. Modes of plotting may be point plot with any character at the point, vector plot, or bar plot. Two features, automatic scaling and windowing, permit the researcher to use computer graphics without spending time first to learn about scaling or ''Tek points'' and preparing long parameter lists for subroutines. Regions on the screen are defined by specifying minima and maxima logical coordinates, i.e., 0 K or milliseconds, and a region number. After definition, a region may be activated for plotting by calling REGN with the region number as an argument

VAX Professional Workstation goes graphic

International Nuclear Information System (INIS)

Downward, J.G.

1984-01-01

The VAX Professional Workstation (VPW) is a collection of programs and procedures designed to provide an integrated work-station environment for the staff at KMS Fusion's research laboratories. During the past year numerous capabilities have been added to VPW, including support for VT125/VT240/4014 graphic workstations, editing windows, and additional desk utilities. Graphics workstation support allows users to create, edit, and modify graph data files, enter the data via a graphic tablet, create simple plots with DATATRIEVE or DECgraph on ReGIS terminals, or elaborate plots with TEKGRAPH on ReGIS or Tektronix terminals. Users may assign display error bars to the data and interactively plot it in a variety of ways. Users also can create and display viewgraphs. Hard copy output for a large network of office terminals is obtained by multiplexing each terminal's video output into a recently developed video multiplexer front ending a single channel video hard copy unit

Practical Implementation of a Graphics Turing Test

DEFF Research Database (Denmark)

Borg, Mathias; Johansen, Stine Schmieg; Thomsen, Dennis Lundgaard

2012-01-01

We present a practical implementation of a variation of the Turing Test for realistic computer graphics. The test determines whether virtual representations of objects appear as real as genuine objects. Two experiments were conducted wherein a real object and a similar virtual object is presented...... graphics. Based on the results from these experiments, future versions of the Graphics Turing Test could ease the restrictions currently necessary in order to test object telepresence under more general conditions. Furthermore, the test could be used to determine the minimum requirements to achieve object...

A study of perceptions of graphical passwords

CSIR Research Space (South Africa)

Vorster, JS

2015-10-01

Full Text Available Depending on the graphical password schema, the key-space can be even bigger than alpha-numeric passwords. However, in conventional passwords, users will re-use letters within a password. This study investigates graphical passwords for symbol...

Graphics and Visualization: Breaking New Frontiers (Introduction to the Special Theme Section on "Computer Graphics and Visualization")

OpenAIRE

O'Sullivan, Carol; Scopigno, Roberto

2001-01-01

From the early graphical applications such as flight simulators, to today's stunning special effects in movies, computer graphics have had a significant impact upon the way computers have been used to represent and visualize the world. There are many big problems left to be solved, some of which are reflected in the following pages of this issue.

TMACS test procedure TP003: Graphics. Revision 5

International Nuclear Information System (INIS)

Scanlan, P.K.

1994-01-01

The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the graphics requirements of the TMACS. The features to be tested are the data display graphics and the graphic elements that provide for operator control and selection of displays

Connecting icons, logos and slogans in graphic trademarks

OpenAIRE

Ambrožič, Maja

2016-01-01

In the public eye the organization is always considered or fully represented by its corporate identity that includes the size of the organization, annual payments, organizational structure, organizational culture, systems owned by the organization, premises, organizational culture, organizational strategy, mission, vision, number of employees etc. Graphic designer when designing graphic trademark by connecting graphic elements (logo, slogan and icon) must take in to consideration all abovemen...

TMACS test procedure TP003: Graphics. Revision 6

International Nuclear Information System (INIS)

Scanlan, P.K.; Washburn, S.

1994-01-01

The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the graphics requirements of the TMACS. The features to be tested are the data display graphics and the graphic elements that provide for operator control and selection of displays

PROMOTING STUDENTS’ EXPLICIT INFORMATION SKILL IN READING COMPREHENSION THROUGH GRAPHIC ORGANIZERS

Directory of Open Access Journals (Sweden)

Syaifudin Latif Darmawan

2013-10-01

Full Text Available This research is carried out to (1 identify whether graphic organizers can improve students’ reading comprehension; and (2 to describe the classroom situation when graphic organizers are employed in instructional process of reading comprehension. The research is adminisitered in two cycles 2014 in the second grade of SMP Muhamadiyah Sekampung, Lampung Timur. The procedure of the research consists of identifying the problem, planning the action, implementing the action, observing the action, and reflecting the result of the research. Qualitative data are collected through interview, observation, questionnaire, and research diary. Quantitative data are collected through test. To analyze qualitative data, the researcher used constant comparative method. It consists of four steps: (1 comparing incidents applicable to each category; (2 Integrating categories and their properties; (3 delimiting the theory; (4 Writing the theory. Meanwhile, to analyze quantitative data, the researcher employed descriptive statistic.    The result of the research shows that using graphic organizers can improve students’ reading comprehension and classroom situation. The improvement on students’ reading comprehension is students are able to find explicit information in a text. The improvement of the classroom situation; (a students come on time in the class (b students are more motivated to join the class (c Students pay more attention in the instructional process. In addition, the improvement also happens to the scores. The mean score increases from 57.56 in the pre-test, 63.34 in the formative test of cycle 1, and 69.56 in the post test of cycle 2

Graphic Design for the Real World?

DEFF Research Database (Denmark)

Elisabeth Bichler, Katrine; Beier, Sofie

2016-01-01

This article examines graphic design’s role within design activism. It outlines design activism in general and its relation to commercial design culture in a consumerist economy. Thereafter it discusses persuasive tendencies in graphic design and questions if its current contribution to design...... activism is limited to its predominant narrow role of persuading for “the good cause.” To illustrate the hypothesis that such a persuasive approach lacks activist potential and thus social impact, cases that represent traditional graphic-design activism are compared to alternative approaches...... solely solving communicative problems for commissioning clients. It is argued that in this way visual communication can intervene into problems on a functional level, similarly to artifacts from design disciplines such as architecture and industrial or product design....

Formal Analysis of Graphical Security Models

DEFF Research Database (Denmark)

Aslanyan, Zaruhi

, software components and human actors interacting with each other to form so-called socio-technical systems. The importance of socio-technical systems to modern societies requires verifying their security properties formally, while their inherent complexity makes manual analyses impracticable. Graphical...... models for security offer an unrivalled opportunity to describe socio-technical systems, for they allow to represent different aspects like human behaviour, computation and physical phenomena in an abstract yet uniform manner. Moreover, these models can be assigned a formal semantics, thereby allowing...... formal verification of their properties. Finally, their appealing graphical notations enable to communicate security concerns in an understandable way also to non-experts, often in charge of the decision making. This dissertation argues that automated techniques can be developed on graphical security...

Visualization of graphical information fusion results

Science.gov (United States)

Blasch, Erik; Levchuk, Georgiy; Staskevich, Gennady; Burke, Dustin; Aved, Alex

2014-06-01

Graphical fusion methods are popular to describe distributed sensor applications such as target tracking and pattern recognition. Additional graphical methods include network analysis for social, communications, and sensor management. With the growing availability of various data modalities, graphical fusion methods are widely used to combine data from multiple sensors and modalities. To better understand the usefulness of graph fusion approaches, we address visualization to increase user comprehension of multi-modal data. The paper demonstrates a use case that combines graphs from text reports and target tracks to associate events and activities of interest visualization for testing Measures of Performance (MOP) and Measures of Effectiveness (MOE). The analysis includes the presentation of the separate graphs and then graph-fusion visualization for linking network graphs for tracking and classification.

General-Purpose Software For Computer Graphics

Science.gov (United States)

Rogers, Joseph E.

1992-01-01

NASA Device Independent Graphics Library (NASADIG) is general-purpose computer-graphics package for computer-based engineering and management applications which gives opportunity to translate data into effective graphical displays for presentation. Features include two- and three-dimensional plotting, spline and polynomial interpolation, control of blanking of areas, multiple log and/or linear axes, control of legends and text, control of thicknesses of curves, and multiple text fonts. Included are subroutines for definition of areas and axes of plots; setup and display of text; blanking of areas; setup of style, interpolation, and plotting of lines; control of patterns and of shading of colors; control of legends, blocks of text, and characters; initialization of devices; and setting of mixed alphabets. Written in FORTRAN 77.

Using graphic organizers to enhance students' science vocabulary and comprehension of nonfiction science text

Science.gov (United States)

Buchanan, Edna

The purpose of this research was to investigate the effectiveness of Frayer Model and the Hierarchical Organizer as a literacy strategy to improve ninth grade students' science vocabulary and comprehension of non-fictions text in Environmental Science course. The study implemented a sequential explanatory methodology design that included quantitative and qualitative instruments. The research sample consisted of one hundred and two (102) high school environmental science students entering the ninth grade for the first time. The two treatment groups each consisted of thirty-five (35) students, and the control group consisted of 32 students. Treatment group one used the Frayer Model; treatment group two used Hierarchical Organizer and the control group used the traditional teaching methods without the use of a graph organizer. The investigator taught both treatment groups and the control group to ensure reliability. The two treatment groups were taught using graphic organizers as the main lesson plan tool and the control group was taught using guided notes lecture with PowerPoint. A pretest and post-test were administered to each student. Student test scores were evaluated to determine whether knowledge gains differed between the treatment groups and the control group. It was found that the use of graphic organizer instruction was significantly better for student achievement when compared to the use of PowerPoint instruction and that there was much more interaction between student and teacher during the graphic organizer lessons. The delivery of the lesson by the use of graphic organizers seemed to promote more success than the use of the PowerPoint and lecture.

Computer graphics application in the engineering design integration system

Science.gov (United States)

Glatt, C. R.; Abel, R. W.; Hirsch, G. N.; Alford, G. E.; Colquitt, W. N.; Stewart, W. A.

1975-01-01

The computer graphics aspect of the Engineering Design Integration (EDIN) system and its application to design problems were discussed. Three basic types of computer graphics may be used with the EDIN system for the evaluation of aerospace vehicles preliminary designs: offline graphics systems using vellum-inking or photographic processes, online graphics systems characterized by direct coupled low cost storage tube terminals with limited interactive capabilities, and a minicomputer based refresh terminal offering highly interactive capabilities. The offline line systems are characterized by high quality (resolution better than 0.254 mm) and slow turnaround (one to four days). The online systems are characterized by low cost, instant visualization of the computer results, slow line speed (300 BAUD), poor hard copy, and the early limitations on vector graphic input capabilities. The recent acquisition of the Adage 330 Graphic Display system has greatly enhanced the potential for interactive computer aided design.

Qué es Motion Graphics

OpenAIRE

Alonso Valdivieso, Concepción

2016-01-01

[EN] What exactly are ‘Motion Graphics’? Many people still aren’t entirely sure. Taken literally they are just graphics in motion, but they also mean much more than that. Motion graphics use incredibly expressive techniques and as a result are often found in advertising, corporate videos, credit sequences, etc. They can translate a complex idea into a clear message with just a few seconds of animation.At the same time they have a very particular, simple and stylish aesthetic. But, if any anim...

Investigating the Interaction of Graphic Organizers and Seductive Details: Can a Graphic Organizer Mitigate the Seductive-Details Effect?

Science.gov (United States)

Rowland-Bryant, Emily; Skinner, Christopher H.; Skinner, Amy L.; Saudargas, Richard; Robinson, Daniel H.; Kirk, Emily R.

2009-01-01

The interaction between seductive details (SD) and a graphic organizer (GO) was investigated. Undergraduate students (n = 207) read a target-material passage about Freud's psychosexual stages. Depending on condition, the participants also read a biographical paragraph (SD-only), viewed a graphic organizer that linked the seductive details to the…

Mvox: Interactive 2-4D medical image and graphics visualization software

DEFF Research Database (Denmark)

Bro-Nielsen, Morten

1996-01-01

Mvox is a new tool for visualization, segmentation and manipulation of a wide range of 2-4D grey level and colour images, and 3D surface graphics, which has been developed at the Department of Mathematical Modelling, Technical University of Denmark. The principal idea behind the software has been...... to provide a flexible tool that is able to handle all the kinds of data that are typically used in a research environment for medical imaging and visualization. At the same time the software should be easy to use and have a consistent interface providing locally only the functions relevant to the context....... This has been achieved by using Unix standards such as X/Motif/OpenGL and conforming to modern standards of interactive windowed programs...

Librarians and Graphic Design: Preparation, Roles, and Desired Support

Science.gov (United States)

Wakimoto, Diana K.

2015-01-01

Librarians often become de facto graphic designers for their libraries, taking responsibility for designing signage, handouts, brochures, web pages, and many other promotional, instructional, and wayfinding documents. However, the majority of librarians with graphic design responsibilities are not trained as graphic designers. This exploratory…

Satisfying the needs of Japanese cancer patients: a comparative study of detailed and standard informed consent documents.

Science.gov (United States)

Sato, Keiko; Watanabe, Toru; Katsumata, Noriyuki; Sato, Tosiya; Ohashi, Yasuo

2014-02-01

Simplified informed consent forms have been successful in improving patient satisfaction and decreasing patient anxiety. However, unsolved problems remain about whether these documents improve comprehension and satisfaction of patients with standard literacy skills. s To investigate whether a detailed consent form explaining the key elements of informed consent, in comparison to a standard consent form, would increase the comprehension and satisfaction of adult cancer patients. Patients who were eligible for the National Surgical Adjuvant Study of Breast Cancer (protocol 01(N-SAS/BC-01)) were randomly selected to receive one of the following four versions: detailed document with graphics, detailed document without graphics, standard document with graphics, and standard document without graphics. The forms were written in plain language from the patients' point of view. A total of 85 patients were administered questionnaires via interview to assess levels of comprehension, satisfaction, and anxiety. Patients demonstrated a strong understanding of information regarding treatment and research. Patient comprehension did not differ significantly between the detailed document arms and the standard document arms. Patient satisfaction level increased according to the amount of information presented in the consent form; most patients preferred the detailed document with graphics. Anxiety and accrual rates in the parent study were not affected by informed consent procedures. Findings were limited to adults who had standard literacy skills and may not be generalizable to a population with lower literacy. Informed consent can be a significant experience for a population with standard literacy skills, as long as the document is easily comprehensible. Such information should be provided in a format that corresponds with patient needs, education levels, and preferences.

Individual Stochastic Screening for the Development of Computer Graphics

Directory of Open Access Journals (Sweden)

Maja Turčić¹*

2012-12-01

Full Text Available With the emergence of new tools and media, art and design have developed into digital computer-generated works. This article presents a sequence of creating art graphics because their original authors have not published the procedures. The goal is to discover the mathematics of an image and the programming libretto with the purpose of organizing a structural base of computer graphics. We will elaborate the procedures used to produce graphics known throughout the history of art, but that are nowadays also found in design and security graphics. The results are closely related graphics obtained by changing parameters that initiate them. The aim is to control the graphics, i.e. to use controlled stochastic to achieve desired solutions. Since the artists from the past have never published the procedures of screening methods, their ideas have remained “only” the works of art. In this article we will present the development of the algorithm that, more or less successfully, simulates those screening solutions. It has been proven that mathematically defined graphical elements serve as screening elements. New technological and mathematical solutions are introduced in the reproduction with individual screening elements to be used in printing.

Extending Graphic Statics for User-Controlled Structural Morphogenesis

OpenAIRE

Fivet, Corentin; Zastavni, Denis; Cap, Jean-François; Structural Morphology Group International Seminar 2011

2011-01-01

The first geometrical definitions of any structure are of primary importance when considering pertinence and efficiency in structural design processes. Engineering history has taught us how graphic statics can be a very powerful tool since it allows the designer to take shapes and forces into account simultaneously. However, current and past graphic statics methods are more suitable for analysis than structural morphogenesis. This contribution introduces new graphical methods that can supp...

40 CFR 141.601 - Standard monitoring.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Standard monitoring. 141.601 Section... Standard monitoring. (a) Standard monitoring plan. Your standard monitoring plan must comply with paragraphs (a)(1) through (a)(4) of this section. You must prepare and submit your standard monitoring plan...

A Graphical Adversarial Risk Analysis Model for Oil and Gas Drilling Cybersecurity

Directory of Open Access Journals (Sweden)

Aitor Couce Vieira

2014-04-01

Full Text Available Oil and gas drilling is based, increasingly, on operational technology, whose cybersecurity is complicated by several challenges. We propose a graphical model for cybersecurity risk assessment based on Adversarial Risk Analysis to face those challenges. We also provide an example of the model in the context of an offshore drilling rig. The proposed model provides a more formal and comprehensive analysis of risks, still using the standard business language based on decisions, risks, and value.

Identification of Learning Processes by Means of Computer Graphics.

Science.gov (United States)

Sorensen, Birgitte Holm

1993-01-01

Describes a development project for the use of computer graphics and video in connection with an inservice training course for primary education teachers in Denmark. Topics addressed include research approaches to computers; computer graphics in learning processes; activities relating to computer graphics; the role of the teacher; and student…

Standard format and content of a licensee physical protection plan for strategic special nuclear material in transit - April 1980

International Nuclear Information System (INIS)

Anon.

1981-01-01

A predetermined plan to respond to safeguards contingency events is required to be prepared, based on personnel and other physical protection resources described in the Physical Protection Plan for strategic special nuclear material (SSNM) in transit. Specific requirements for the contingency plan are provided in Appendix C. Licensee Safeguards Contingency Plans, to 10 CFR Part 73. Regulatory Guide 5.56, Standard Format and Content of Safeguards Contingency Plans for Transportation, provides guidance for the preparation of transportation contingency plans. Licensee is reminded that all three submissions - the Physical Protection Plan, the Physical Protection Arrangements for Specific Shipments, and the Safeguards Contingency Plan - together describe the system for physical protection of each particular shipment. They should be developed and maintained to be completely consistent with each other for each shipment

Data Sorting Using Graphics Processing Units

Directory of Open Access Journals (Sweden)

M. J. Mišić

2012-06-01

Full Text Available Graphics processing units (GPUs have been increasingly used for general-purpose computation in recent years. The GPU accelerated applications are found in both scientific and commercial domains. Sorting is considered as one of the very important operations in many applications, so its efficient implementation is essential for the overall application performance. This paper represents an effort to analyze and evaluate the implementations of the representative sorting algorithms on the graphics processing units. Three sorting algorithms (Quicksort, Merge sort, and Radix sort were evaluated on the Compute Unified Device Architecture (CUDA platform that is used to execute applications on NVIDIA graphics processing units. Algorithms were tested and evaluated using an automated test environment with input datasets of different characteristics. Finally, the results of this analysis are briefly discussed.

Design considerations for parallel graphics libraries

Science.gov (United States)

Crockett, Thomas W.

1994-01-01

Applications which run on parallel supercomputers are often characterized by massive datasets. Converting these vast collections of numbers to visual form has proven to be a powerful aid to comprehension. For a variety of reasons, it may be desirable to provide this visual feedback at runtime. One way to accomplish this is to exploit the available parallelism to perform graphics operations in place. In order to do this, we need appropriate parallel rendering algorithms and library interfaces. This paper provides a tutorial introduction to some of the issues which arise in designing parallel graphics libraries and their underlying rendering algorithms. The focus is on polygon rendering for distributed memory message-passing systems. We illustrate our discussion with examples from PGL, a parallel graphics library which has been developed on the Intel family of parallel systems.

Graphic Design in Libraries: A Conceptual Process

Science.gov (United States)

Ruiz, Miguel

2014-01-01

Providing successful library services requires efficient and effective communication with users; therefore, it is important that content creators who develop visual materials understand key components of design and, specifically, develop a holistic graphic design process. Graphic design, as a form of visual communication, is the process of…

Graphic Novels in the Secondary Classroom and School Libraries

Science.gov (United States)

Griffith, Paula E.

2010-01-01

The author examines the rise in popularity of graphic novels, the sales of which have steadily increased as their influence expands into adolescent culture. This article also includes an overview of current research results supporting the use of graphic novels within the classroom and school library; graphic novels support English-language…

37 CFR 202.10 - Pictorial, graphic, and sculptural works.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Pictorial, graphic, and... Pictorial, graphic, and sculptural works. (a) In order to be acceptable as a pictorial, graphic, or... utility or design patent will not affect the registrability of a claim in an original work of pictorial...

Graphic Communications Teachers' Concerns and Beliefs Regarding Their Online Teaching of Graphic Communications Hands-On Classes

OpenAIRE

Carroll, Millicent Hope

2016-01-01

Previous literature has exposed the impact of concerns and beliefs on a teacher's decision to adopt online teaching methods, and in particular for Graphic Communications teachers, the extent to which their concerns and beliefs influence whether or not they decide to teach online. The potential problem that may exist is that of Graphic Communications teachers' concerns and beliefs are playing a role in impeding their transitioning to teaching in the online environment. The purpose of this stud...

Interactive and Animated Scalable Vector Graphics and R Data Displays

Directory of Open Access Journals (Sweden)

Deborah Nolan

2012-01-01

Full Text Available We describe an approach to creating interactive and animated graphical displays using R's graphics engine and Scalable Vector Graphics, an XML vocabulary for describing two-dimensional graphical displays. We use the svg( graphics device in R and then post-process the resulting XML documents. The post-processing identities the elements in the SVG that correspond to the different components of the graphical display, e.g., points, axes, labels, lines. One can then annotate these elements to add interactivity and animation effects. One can also use JavaScript to provide dynamic interactive effects to the plot, enabling rich user interactions and compelling visualizations. The resulting SVG documents can be embedded withinHTML documents and can involve JavaScript code that integrates the SVG and HTML objects. The functionality is provided via the SVGAnnotation package and makes static plots generated via R graphics functions available as stand-alone, interactive and animated plots for the Web and other venues.

Standardization versus customization of glucose reporting.

Science.gov (United States)

Rodbard, David

2013-05-01

Bergenstal et al. (Diabetes Technol Ther 2013;15:198-211) described an important approach toward standardization of reporting and analysis of continuous glucose monitoring and self-monitoring of blood glucose (SMBG) data. The ambulatory glucose profile (AGP), a composite display of glucose by time of day that superimposes data from multiple days, is perhaps the most informative and useful of the many graphical approaches to display glucose data. However, the AGP has limitations; some variations are desirable and useful. Synchronization with respect to meals, traditionally used in glucose profiles for SMBG data, can improve characterization of postprandial glucose excursions. Several other types of graphical display are available, and recently developed ones can augment the information provided by the AGP. There is a need to standardize the parameters describing glycemic variability and cross-validate the available computer programs that calculate glycemic variability. Clinical decision support software can identify and prioritize clinical problems, make recommendations for modifications of therapy, and explain its justification for those recommendations. The goal of standardization is challenging in view of the diversity of clinical situations and of computing and display platforms and software. Standardization is desirable but must be done in a manner that permits flexibility and fosters innovation.

Graphics Tablet Technology in Second Year Thermal Engineering Teaching

Science.gov (United States)

Carrillo, Antonio; Cejudo, José Manuel; Domínguez, Fernando; Rodríguez, Eduardo

2013-01-01

Graphics tablet technology is well known in markets such as manufacturing, graphics arts and design but it has not yet found widespread acceptance for university teaching. A graphics tablet is an affordable teaching tool that combines the best features from traditional and new media. It allows developing a progressive, interactive lecture (as a…

When Do Computer Graphics Contribute to Early Literacy Learning?

Science.gov (United States)

Wepner, Shelley B.; Cotter, Michelle

2002-01-01

Notes that new literacies use computer graphics to tell a story, demonstrate a theory, or support a definition. Offers a functionality framework for assessing the value of computer graphics for early literacy learning. Provides ideas for determining the value of CD-ROM software and websites. Concludes that graphics that give text meaning or…

Mathematical Graphic Organizers

Science.gov (United States)

Zollman, Alan

2009-01-01

As part of a math-science partnership, a university mathematics educator and ten elementary school teachers developed a novel approach to mathematical problem solving derived from research on reading and writing pedagogy. Specifically, research indicates that students who use graphic organizers to arrange their ideas improve their comprehension…

Learning Graphical Models With Hubs.

Science.gov (United States)

Tan, Kean Ming; London, Palma; Mohan, Karthik; Lee, Su-In; Fazel, Maryam; Witten, Daniela

2014-10-01

We consider the problem of learning a high-dimensional graphical model in which there are a few hub nodes that are densely-connected to many other nodes. Many authors have studied the use of an ℓ 1 penalty in order to learn a sparse graph in the high-dimensional setting. However, the ℓ 1 penalty implicitly assumes that each edge is equally likely and independent of all other edges. We propose a general framework to accommodate more realistic networks with hub nodes, using a convex formulation that involves a row-column overlap norm penalty. We apply this general framework to three widely-used probabilistic graphical models: the Gaussian graphical model, the covariance graph model, and the binary Ising model. An alternating direction method of multipliers algorithm is used to solve the corresponding convex optimization problems. On synthetic data, we demonstrate that our proposed framework outperforms competitors that do not explicitly model hub nodes. We illustrate our proposal on a webpage data set and a gene expression data set.

Brain Activities Associated with Graphic Emoticons: An fMRI Study

Science.gov (United States)

Yuasa, Masahide; Saito, Keiichi; Mukawa, Naoki

In this paper, we describe the brain activities that are associated with graphic emoticons by using functional MRI (fMRI). We use various types of faces from abstract to photorealistic in computer network applications. A graphics emoticon is an abstract face in communication over computer network. In this research, we created various graphic emoticons for the fMRI study and the graphic emoticons were classified according to friendliness and level of arousal. We investigated the brain activities of participants who were required to evaluate the emotional valence of the graphic emoticons (happy or sad). The experimental results showed that not only the right inferior frontal gyrus and the cingulate gyrus, but also the inferior and middle temporal gyrus and the fusiform gyrus, were found to be activated during the experiment. Forthermore, it is possible that the activation of the right inferior frontal gyrus and the cingulate gyrus is related to the type of abstract face. Since the inferior and middle temporal gyrus were activated, even though the graphic emoticons are static, we may perceive graphic emoticons as dynamic and living agents. Moreover, it is believed that text and graphics emoticons play an important role in enriching communication among users.

Animated graphics for comparing two risks: a cautionary tale.

Science.gov (United States)

Zikmund-Fisher, Brian J; Witteman, Holly O; Fuhrel-Forbis, Andrea; Exe, Nicole L; Kahn, Valerie C; Dickson, Mark

2012-07-25

The increasing use of computer-administered risk communications affords the potential to replace static risk graphics with animations that use motion cues to reinforce key risk messages. Research on the use of animated graphics, however, has yielded mixed findings, and little research exists to identify the specific animations that might improve risk knowledge and patients' decision making. To test whether viewing animated forms of standard pictograph (icon array) risk graphics displaying risks of side effects would improve people's ability to select the treatment with the lowest risk profile, as compared with viewing static images of the same risks. A total of 4198 members of a demographically diverse Internet panel read a scenario about two hypothetical treatments for thyroid cancer. Each treatment was described as equally effective but varied in side effects (with one option slightly better than the other). Participants were randomly assigned to receive all risk information in 1 of 10 pictograph formats in a quasi-factorial design. We compared a control condition of static grouped icons with a static scattered icon display and with 8 Flash-based animated versions that incorporated different combinations of (1) building the risk 1 icon at a time, (2) having scattered risk icons settle into a group, or (3) having scattered risk icons shuffle themselves (either automatically or by user control). We assessed participants' ability to choose the better treatment (choice accuracy), their gist knowledge of side effects (knowledge accuracy), and their graph evaluation ratings, controlling for subjective numeracy and need for cognition. When compared against static grouped-icon arrays, no animations significantly improved any outcomes, and most showed significant performance degradations. However, participants who received animations of grouped icons in which at-risk icons appeared 1 at a time performed as well on all outcomes as the static grouped-icon control group

Systems Biology Graphical Notation: Entity Relationship language Level 1 Version 2.

Science.gov (United States)

Sorokin, Anatoly; Le Novère, Nicolas; Luna, Augustin; Czauderna, Tobias; Demir, Emek; Haw, Robin; Mi, Huaiyu; Moodie, Stuart; Schreiber, Falk; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Entity Relationship language (ER) represents biological entities and their interactions and relationships within a network. SBGN ER focuses on all potential relationships between entities without considering temporal aspects. The nodes (elements) describe biological entities, such as proteins and complexes. The edges (connections) provide descriptions of interactions and relationships (or influences), e.g., complex formation, stimulation and inhibition. Among all three languages of SBGN, ER is the closest to protein interaction networks in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

Forward planning

International Nuclear Information System (INIS)

Fontenla, D.P.

2008-01-01

By definition, forward planning is a process where input consists of conditions on beam configurations and parameters and output consists of dose distributions on target and critical structures, in contrast to inverse planning, where the opposite is true. For forward planning IMRT, criteria are as follows: (i) Plans created as an extension of standard 3D conformational planning; (ii) No significant increase in the complexity of the treatment planning or treatment delivery process; (3) Treatment verification using standard QA procedures; and process consists of the following steps: (i) Create a standard 3D conformational treatment plan; (ii) Copy one of the existing beams; (iii) Create control points: design new beam segments, blocking high dose areas; (iv) Repeat for all beams; (v) Re-compute dose; and (vi) Adjust control points weights to achieve desired dose distribution. A detailed exposition, with many clinical examples, is given for the breast, lung, and brain (P.A.)

Advanced computer graphics techniques as applied to the nuclear industry

International Nuclear Information System (INIS)

Thomas, J.J.; Koontz, A.S.

1985-08-01

Computer graphics is a rapidly advancing technological area in computer science. This is being motivated by increased hardware capability coupled with reduced hardware costs. This paper will cover six topics in computer graphics, with examples forecasting how each of these capabilities could be used in the nuclear industry. These topics are: (1) Image Realism with Surfaces and Transparency; (2) Computer Graphics Motion; (3) Graphics Resolution Issues and Examples; (4) Iconic Interaction; (5) Graphic Workstations; and (6) Data Fusion - illustrating data coming from numerous sources, for display through high dimensional, greater than 3-D, graphics. All topics will be discussed using extensive examples with slides, video tapes, and movies. Illustrations have been omitted from the paper due to the complexity of color reproduction. 11 refs., 2 figs., 3 tabs

MuSim, a Graphical User Interface for Multiple Simulation Programs

Energy Technology Data Exchange (ETDEWEB)

Roberts, Thomas [MUONS Inc., Batavia; Cummings, Mary Anne [MUONS Inc., Batavia; Johnson, Rolland [MUONS Inc., Batavia; Neuffer, David [Fermilab

2016-06-01

MuSim is a new user-friendly program designed to interface to many different particle simulation codes, regardless of their data formats or geometry descriptions. It presents the user with a compelling graphical user interface that includes a flexible 3-D view of the simulated world plus powerful editing and drag-and-drop capabilities. All aspects of the design can be parametrized so that parameter scans and optimizations are easy. It is simple to create plots and display events in the 3-D viewer (with a slider to vary the transparency of solids), allowing for an effortless comparison of different simulation codes. Simulation codes: G4beamline, MAD-X, and MCNP; more coming. Many accelerator design tools and beam optics codes were written long ago, with primitive user interfaces by today's standards. MuSim is specifically designed to make it easy to interface to such codes, providing a common user experience for all, and permitting the construction and exploration of models with very little overhead. For today's technology-driven students, graphical interfaces meet their expectations far better than text-based tools, and education in accelerator physics is one of our primary goals.

Planning the Unplanned Experiment: Towards Assessing the Efficacy of Standards for Safety-Critical Software

Science.gov (United States)

Graydon, Patrick J.; Holloway, C. M.

2015-01-01

Safe use of software in safety-critical applications requires well-founded means of determining whether software is fit for such use. While software in industries such as aviation has a good safety record, little is known about whether standards for software in safety-critical applications 'work' (or even what that means). It is often (implicitly) argued that software is fit for safety-critical use because it conforms to an appropriate standard. Without knowing whether a standard works, such reliance is an experiment; without carefully collecting assessment data, that experiment is unplanned. To help plan the experiment, we organized a workshop to develop practical ideas for assessing software safety standards. In this paper, we relate and elaborate on the workshop discussion, which revealed subtle but important study design considerations and practical barriers to collecting appropriate historical data and recruiting appropriate experimental subjects. We discuss assessing standards as written and as applied, several candidate definitions for what it means for a standard to 'work,' and key assessment strategies and study techniques and the pros and cons of each. Finally, we conclude with thoughts about the kinds of research that will be required and how academia, industry, and regulators might collaborate to overcome the noted barriers.

Images of Struggle: Teaching Human Rights with Graphic Novels

Science.gov (United States)

Carano, Kenneth T.; Clabough, Jeremiah

2016-01-01

The authors explore how graphic novels can be used in the middle and high school social studies classroom to teach human rights. The article begins with a rationale on the benefits of using graphic novels. It next focuses on four graphic novels related to human rights issues: "Maus I: A Survivor's Tale: My Father Bleeds" (Speigelman…

Multiobjective optimization with a modified simulated annealing algorithm for external beam radiotherapy treatment planning

International Nuclear Information System (INIS)

Aubry, Jean-Francois; Beaulieu, Frederic; Sevigny, Caroline; Beaulieu, Luc; Tremblay, Daniel

2006-01-01

Inverse planning in external beam radiotherapy often requires a scalar objective function that incorporates importance factors to mimic the planner's preferences between conflicting objectives. Defining those importance factors is not straightforward, and frequently leads to an iterative process in which the importance factors become variables of the optimization problem. In order to avoid this drawback of inverse planning, optimization using algorithms more suited to multiobjective optimization, such as evolutionary algorithms, has been suggested. However, much inverse planning software, including one based on simulated annealing developed at our institution, does not include multiobjective-oriented algorithms. This work investigates the performance of a modified simulated annealing algorithm used to drive aperture-based intensity-modulated radiotherapy inverse planning software in a multiobjective optimization framework. For a few test cases involving gastric cancer patients, the use of this new algorithm leads to an increase in optimization speed of a little more than a factor of 2 over a conventional simulated annealing algorithm, while giving a close approximation of the solutions produced by a standard simulated annealing. A simple graphical user interface designed to facilitate the decision-making process that follows an optimization is also presented

Computer graphics in reactor safety analysis

International Nuclear Information System (INIS)

Fiala, C.; Kulak, R.F.

1989-01-01

This paper describes a family of three computer graphics codes designed to assist the analyst in three areas: the modelling of complex three-dimensional finite element models of reactor structures; the interpretation of computational results; and the reporting of the results of numerical simulations. The purpose and key features of each code are presented. The graphics output used in actual safety analysis are used to illustrate the capabilities of each code. 5 refs., 10 figs

The graphics software of the Saclay linear accelerator control system

International Nuclear Information System (INIS)

Gournay, J.F.

1987-06-01

The Control system of the Saclay Linear Accelerator is based upon modern technology hardware. In the graphic software, pictures are created in exactly the same manner for all the graphic devices supported by the system. The informations used to draw a picture are stored in an array called a graphic segment. Three output primitives are used to add graphic material in a segment. Three coordinate systems are defined

Visual accessibility in graphic design: A client–designer communication failure

OpenAIRE

Cornish, Katie; Goodman-Deane, Joy; Ruggeri, Kai; Clarkson, P. John

2015-01-01

It is essential that graphic design is visually clear and accessible. However, evidence suggests that a lack of consideration is given to visual accessibility in print-based graphic design. Furthermore, effective client-designer communication is a vital component in this. This paper investigates current graphic design practice, with regard to visual accessibility, specifically focussing on client-designer communication. A survey of 122 graphic designers and clients identified that these two g...

Planning and Producing Audiovisual Materials. Third Edition.

Science.gov (United States)

Kemp, Jerrold E.

A revised edition of this handbook provides illustrated, step-by-step explanations of how to plan and produce audiovisual materials. Included are sections on the fundamental skills--photography, graphics and recording sound--followed by individual sections on photographic print series, slide series, filmstrips, tape recordings, overhead…

Graphics with Special Interfaces for Disabled People.

Science.gov (United States)

Tronconi, A.; And Others

The paper describes new software and special input devices to allow physically impaired children to utilize the graphic capabilities of personal computers. Special input devices for computer graphics access--the voice recognition card, the single switch, or the mouse emulator--can be used either singly or in combination by the disabled to control…

Deconstruction and Graphic Design: History Meets Theory.

Science.gov (United States)

Lupton, Ellen; Miller, J. Abbott

1994-01-01

Considers the reception and use of deconstruction in the recent history of graphic design. Considers the place of graphics within the theory of deconstruction in the work of philosopher Jacques Derrida. Argues that deconstruction is not a style but a mode of questioning through and about the technologies, formal devices, social institutions and…

Graphics tablet technology in second year thermal engineering teaching

Directory of Open Access Journals (Sweden)

Antonio Carrillo Andrés

2013-12-01

Full Text Available Graphics tablet technology is well known in markets such as manufacturing, graphics arts and design but they have not yet found widespread acceptance for university teaching. A graphics tablet is an affordable and efficient teaching tool that combines the best features from traditional and new media. It allows developing a progressive, interactive lecture (as a traditional blackboard does. However, the tablet is more versatile, being able to integrate graphic material such as tables, graphs, colours, etc. In addition to that, lecture notes can be saved and posted on a course website. The objective of this paper is to show the usefulness of tablet technology in undergraduate engineering teaching by sharing experiences made using a graphics tablet for lecturing a second year Thermal Engineering course. Students’ feedback is definitely positive, though there are some caveats regarding technical and operative problems.

Exploring Topsnut-Graphical Passwords by Twin Odd-elegant Trees

Directory of Open Access Journals (Sweden)

Wang Hong-yu

2017-01-01

Full Text Available Graphical passwords are facing a good opportunity as 2-dimension codes are accepted by many people, since it has been applied in mobile devices, electronic equipments with touch screen, and so on. QR codes can be considered as a type of graphical passwords. Topsnut-graphical password differs from the existing graphical passwords, and has been investigated and developed. In this article, a new type of Topsnut-graphical passwords has been designed by technique of graph theory, called twin odd-elegant labelling. We make the twin odd-elegant graphs for one-key vs two or more locks (conversely, one-lock vs two or more keys. These Topsnut-GPWs show perfect matching characteristics of locks (TOE-lock-models and keys (TOE-key-models. We show examples for testing our methods which can be easily transformed into effective algorithms.

44 CFR 201.4 - Standard State Mitigation Plans.

Science.gov (United States)

2010-10-01

... resources to reducing the effects of natural hazards. (b) Planning process. An effective planning process is... location of all natural hazards that can affect the State, including information on previous occurrences of... updating the plan. (ii) A system for monitoring implementation of mitigation measures and project closeouts...

Comics & Graphic Novels

Science.gov (United States)

Cleaver, Samantha

2008-01-01

Not so many years ago, comic books in school were considered the enemy. Students caught sneaking comics between the pages of bulky--and less engaging--textbooks were likely sent to the principal. Today, however, comics, including classics such as "Superman" but also their generally more complex, nuanced cousins, graphic novels, are not only…

Graphic design and scientific research: the experience of the INGV Laboratorio Grafica e Immagini

Science.gov (United States)

Riposati, Daniela; D'Addezio, Giuliana; Chesi, Angela; Di Laura, Francesca; Palone, Sabrina

2016-04-01

The Laboratorio Grafica e Immagini is the INGV reference structure for the graphic and visual communication supporting institutional and research activities. Part of the activity is focused on the production of different materials concerning the INGV Educational and Outreach projects on the main themes of Geophysics and natural hazards. The forefront results of research activity, in fact, are periodically transferred to the public through an intense and comprehensive plan of scientific dissemination. In 10 years of activity, the Laboratorio has become an essential point of reference for this production, widely known within the scientific community. Positive experiences are the result of a strict relationship between graphic design and scientific research, in particular the process concerning the collaborative work between designers and researchers. In projects such as the realization of museum exhibition or the production of illustrative brochures, generally designed for broad-spectrum public, the goal is to make easier the understanding and to support the scientific message, making concepts enjoyable and fruitful through the emotional involvement that visual image can arouse. Our graphics and editorial products through composition of signs and images by using differt tools on different media (the use of colors, lettering, graphic design, visual design, web design etc.) link to create a strong identity "INGV style", in order to make them easily recognizable in Educational and Outreach projects: in one words "branding". For example, a project product package might include a logo or other artwork, organized text and pure design elements such as shapes and colour, which unify the piece. Colour is used not only to help the "brand" stand out from the international overview, but in our case to have a unifying outcome across all the INGV sections. We also analysed the restyling project of different materials, one of the most important features of graphic design

Graphics and Animation on iOS A Beginner's Guide to Core Graphics and Core Animation

CERN Document Server

Nahavandipoor, Vandad

2011-01-01

Jazz up your iPhone and iPad apps with some slick graphics and animation-and keep users from looking elsewhere. This short and concise book shows developers with even little Cocoa programming experience how to create impressive graphics and animation effects with relatively easy coding. Learn how to incorporate smooth animations and draw images in your apps to achieve the classy look you want. The recipes in this book include step-by-step instructions and simple code solutions that you can put to work right away. Learn basic concepts for adapting to different screen sizesConstruct, set, and

Basic Graphical Data Management System (BAGDAMS version 1.0)

International Nuclear Information System (INIS)

Weindorf, J.W.

1979-06-01

BAGDAMS (BAsic Graphical DAta Management System) is a set of FORTRAN callable subroutines which provides mass storage data structuring and manipulation capabilities. Although primarily designed to facilitate the handling of graphical data files (files containing information to be displayed upon graphical hardware devices), BAGDAMS can also be used in many other applications requiring complex mass storage resident data structures. (author)

Graphic software ''MiniG'' for the Mini-6

International Nuclear Information System (INIS)

Zen, J.

1984-06-01

MiniG is a set of subprograms, written and aimed at being used in Fortran for graphic applications in nuclear physics (histograms or point clouds). It includes three representation modes of axis scales (linear, semi-log and squared root), five types of vectors and numerous graphic symbols for spectra representation with or without notation (circle, cross, arrow, triangle, spiral, etc.). It offers also the possibilities of the software ''Plot-10'' of Tektronix, and accept all the types of graphic terminals of SATD connected to Mini-6 [fr

Turtle Graphics implementation using a graphical dataflow programming approach

OpenAIRE

Lovejoy, Robert Steven

1992-01-01

Approved for public release; distribution is unlimited This thesis expands the concepts of object-oriented programming to implement a visual dataflow programming language. The main thrust of this research is to develop a functional prototype language, based upon the Turtle Graphics tool provided by LOGO programming language, for children to develop both their problem solving skills as well as their general programming skills. The language developed for this thesis was implemented in the...

Standardization process aligned to integrated management system: the case of TRANSPETRO's Oil Pipelines and Terminals Unit

Energy Technology Data Exchange (ETDEWEB)

Almeida, Maria Fatima Ludovico de [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio/ITUC), Rio de Janeiro, RJ (Brazil). Instituto Tecnologico; Labrunie, Charles; Araujo, Dario Doria de [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil). Diretoria de Terminais e Oleodutos

2009-07-01

This paper presents the implementation by PETROBRAS Transporte S.A. - TRANSPETRO of its Oil Pipelines and Terminals Standardization Program (PRONOT) within the scope of the 'Integrated Management System' (IMS). This program, launched in 2006 in the regions where the company operates, aims at standardizing all of its oil pipeline and terminal operations. Its implementation was planned in two phases: the first, already successfully concluded, refers to pipeline operations, industrial maintenance and right-of-way activities management; and the second, initiated in 2009, encompasses cross-sectional activities including health, safety and environment (HSE); training and development of oil pipeline workforce; communication with stake holders; oil pipeline integrity; and engineering project requirements. The documental structures of TRANSPETRO IMS and PRONOT are described and represented graphically to emphasize the intentional alignment of the standardization process carried out by the Oil Pipelines and Terminals Unit to the corporate IMS, based upon national and international literature review and through practical research focusing on the best international practices. (author)

The Role of Graphic Orientations in Children's Drawings of Familiar and Novel Objects at Rest and in Motion.

Science.gov (United States)

Ives, William; Rovet, Joanne

1979-01-01

Reports three experiments which investigate: whether familiar objects have standard graphic orientations (Experiment 1); the relationship between use of object orientations and more conventional methods in depicting familiar objects in motion (Experiment 2); and whether orientations are used differently in novel objects whose only defining feature…

A memorable reading experience with motion graphics

OpenAIRE

Sandhu, Cecilia

2017-01-01

Studien omfattar ämnet motion graphics (rörlig grafik) och hur det kan förmedla en skriven text. En textbaserad rörlig grafik togs fram för att undersöka om rörelserna gjorde textinnehållet lättare att minnas och förstå jämfört med att läsa texten statiskt. Skillnader men också likheter gällande korttidsminne och läsupplevelse undersöktes genom två testgrupper. Studien visar på att läsarna mindes bättre med motion graphics, att motion graphics i vissa fall kan förmedla en mer positiv och spec...

Second Annual AEC Scientific Computer Information Exhange Meeting. Proceedings of the technical program theme: computer graphics

Energy Technology Data Exchange (ETDEWEB)

Peskin,A.M.; Shimamoto, Y.

1974-01-01

The topic of computer graphics serves well to illustrate that AEC affiliated scientific computing installations are well represented in the forefront of computing science activities. The participant response to the technical program was overwhelming--both in number of contributions and quality of the work described. Session I, entitled Advanced Systems, contains presentations describing systems that contain features not generally found in graphics facilities. These features can be roughly classified as extensions of standard two-dimensional monochromatic imaging to higher dimensions including color and time as well as multidimensional metrics. Session II presents seven diverse applications ranging from high energy physics to medicine. Session III describes a number of important developments in establishing facilities, techniques and enhancements in the computer graphics area. Although an attempt was made to schedule as many of these worthwhile presentations as possible, it appeared impossible to do so given the scheduling constraints of the meeting. A number of prospective presenters 'came to the rescue' by graciously withdrawing from the sessions. Some of their abstracts have been included in the Proceedings.

History And Importance Of Graphic Design

OpenAIRE

Lyallya, Kirill

2016-01-01

This thesis is about history and importance of graphic design in different periods, from ancient times until today. The features inherent in different countries are considered. The techniques, basic methods for creating projects and computer software that designers have used are mentioned. In order to understand the importance of graphic design in our lives, it is considered from the side of ordinary people, how it manifests itself in daily lives and how it affects business. The thesis provid...

Improved Planning Time and Plan Quality Through Multicriteria Optimization for Intensity-Modulated Radiotherapy

International Nuclear Information System (INIS)

Craft, David L.; Hong, Theodore S.; Shih, Helen A.; Bortfeld, Thomas R.

2012-01-01

Purpose: To test whether multicriteria optimization (MCO) can reduce treatment planning time and improve plan quality in intensity-modulated radiotherapy (IMRT). Methods and Materials: Ten IMRT patients (5 with glioblastoma and 5 with locally advanced pancreatic cancers) were logged during the standard treatment planning procedure currently in use at Massachusetts General Hospital (MGH). Planning durations and other relevant planning information were recorded. In parallel, the patients were planned using an MCO planning system, and similar planning time data were collected. The patients were treated with the standard plan, but each MCO plan was also approved by the physicians. Plans were then blindly reviewed 3 weeks after planning by the treating physician. Results: In all cases, the treatment planning time was vastly shorter for the MCO planning (average MCO treatment planning time was 12 min; average standard planning time was 135 min). The physician involvement time in the planning process increased from an average of 4.8 min for the standard process to 8.6 min for the MCO process. In all cases, the MCO plan was blindly identified as the superior plan. Conclusions: This provides the first concrete evidence that MCO-based planning is superior in terms of both planning efficiency and dose distribution quality compared with the current trial and error–based IMRT planning approach.

Network performance for graphical control systems

International Nuclear Information System (INIS)

Clout, P.; Geib, M.; Westervelt, R.

1992-01-01

Vsystem is a toolbox for building graphically-based control systems. The real-tiem database component, Vaccess, includes all the networking support necessary to build multi-computer control systems. Vaccess has two modes of database access, synchronous and asynchronous. Vdraw is another component of Vsystem that allows developers and users to develop control screens and windows by drawing rather than programming. Based on X-windows, Vsystem provides the possibility of running Vdraw either on the workstation with the graphics or on the computer with the database. We have made some measurements on the cpu loading, elapsed time and the network loading to give some guidance in system configuration performance. It will be seen that asynchronous network access gives large performance increases and that the network database change notification protocol can be either more or less efficient than the X-window network protocol, depending on the graphical representation of the data. (author)

COMPUTER GRAPHICS IN ENGINEERING GRAPHICS DEPARTMENT OF MOSCOW AVIATION INSTITUTE EDUCATIONAL PROCESS

OpenAIRE

Ludmila P. Bobrik; Leonid V. Markin

2013-01-01

Current state of technical universities students’ engineering grounding and “Engineering graphics” course place in MAI are analyzed in this paper. Also bachelor degree problems and experience of creation of issuing specialty based on «Engineering graphics» department are considered. 

A Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology

Energy Technology Data Exchange (ETDEWEB)

Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Welch, Tim [U.S. Department of Energy (DOE), Washington, DC (United States).Office of Energy Efficiency and Renewable Energy (EERE); Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stewart, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Kyutae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevelhimer, Mark S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burress, Timothy A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pracheil, Brenda M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pries, Jason L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); O' Connor, Patrick W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Curd, Shelaine L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ekici, Kivanc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Papanicolaou, Thanos [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Tsakiris, Achilleas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Kutz, Benjamin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Bishop, Norm [Knight Piesold, Denver, CO (United States); McKeown, Alisha [McKeown and Associates, Moberly, MO (United States); Rabon, Daniel [U.S. Department of Energy (DOE), Washington, DC (United States).Office of Energy Efficiency and Renewable Energy (EERE); Zimmerman, Gregory P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Uria Martinez, Rocio [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamay, Ryan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-02-01

The Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology (MYRP) presents a strategy for specifying, designing, testing, and demonstrating the efficacy of standard modular hydropower (SMH) as an environmentally compatible and cost-optimized renewable electricity generation technology. The MYRP provides the context, background, and vision for testing the SMH hypothesis: if standardization, modularity, and preservation of stream functionality become essential and fully realized features of hydropower technology, project design, and regulatory processes, they will enable previously unrealized levels of new project development with increased acceptance, reduced costs, increased predictability of outcomes, and increased value to stakeholders. To achieve success in this effort, the MYRP outlines a framework of stakeholder-validated criteria, models, design tools, testing facilities, and assessment protocols that will facilitate the development of next-generation hydropower technologies.

Real-time autocorrelator for fluorescence correlation spectroscopy based on graphical-processor-unit architecture: method, implementation, and comparative studies

Science.gov (United States)

Laracuente, Nicholas; Grossman, Carl

2013-03-01

We developed an algorithm and software to calculate autocorrelation functions from real-time photon-counting data using the fast, parallel capabilities of graphical processor units (GPUs). Recent developments in hardware and software have allowed for general purpose computing with inexpensive GPU hardware. These devices are more suited for emulating hardware autocorrelators than traditional CPU-based software applications by emphasizing parallel throughput over sequential speed. Incoming data are binned in a standard multi-tau scheme with configurable points-per-bin size and are mapped into a GPU memory pattern to reduce time-expensive memory access. Applications include dynamic light scattering (DLS) and fluorescence correlation spectroscopy (FCS) experiments. We ran the software on a 64-core graphics pci card in a 3.2 GHz Intel i5 CPU based computer running Linux. FCS measurements were made on Alexa-546 and Texas Red dyes in a standard buffer (PBS). Software correlations were compared to hardware correlator measurements on the same signals. Supported by HHMI and Swarthmore College

Risk Management Collaboration through Sharing Interactive Graphics

Science.gov (United States)

Slingsby, Aidan; Dykes, Jason; Wood, Jo; Foote, Matthew

2010-05-01

Risk management involves the cooperation of scientists, underwriters and actuaries all of whom analyse data to support decision-making. Results are often disseminated through static documents with graphics that convey the message the analyst wishes to communicate. Interactive graphics are increasingly popular means of communicating the results of data analyses because they enable other parties to explore and visually analyse some of the data themselves prior to and during discussion. Discussion around interactive graphics can occur synchronously in face-to-face meetings or with video-conferencing and screen sharing or they can occur asynchronously through web-sites such as ManyEyes, web-based fora, blogs, wikis and email. A limitation of approaches that do not involve screen sharing is the difficulty in sharing the results of insights from interacting with the graphic. Static images accompanied can be shared but these themselves cannot be interacted, producing a discussion bottleneck (Baker, 2008). We address this limitation by allowing the state and configuration of graphics to be shared (rather than static images) so that a user can reproduce someone else's graphic, interact with it and then share the results of this accompanied with some commentary. HiVE (Slingsby et al, 2009) is a compact and intuitive text-based language that has been designed for this purpose. We will describe the vizTweets project (a 9-month project funded by JISC) in which we are applying these principles to insurance risk management in the context of the Willis Research Network, the world's largest collaboration between the insurance industry and the academia). The project aims to extend HiVE to meet the needs of the sector, design, implement free-available web services and tools and to provide case studies. We will present a case study that demonstrate the potential of this approach for collaboration within the Willis Research Network. Baker, D. Towards Transparency in Visualisation Based

Cancer and the Comics: Graphic Narratives and Biolegitimate Lives.

Science.gov (United States)

McMullin, Juliet

2016-06-01

Cancer graphic narratives, I argue, are part of a medical imaginary that includes representations of difference and biomedical technology that engage Fassin's (2009) concept of biolegitimacy. Framed in three parts, the argument first draws on discourses about cancer graphic narratives from graphic medicine scholars and authors to demonstrate a construction of universal suffering. Second, I examine tropes of hope and difference as a biotechnical embrace. Finally, I consider biosociality within the context of this imaginary and the construction of a meaningful life. Autobiographical graphic narrative as a creative genre that seeks to give voice to individual illness experiences in the context of biomedicine raises anthropological questions about the interplay between the ordinary and biolegitmate. Cancer graphic narratives deconstruct the big events to demonstrate the ordinary ways that a life constructed as different becomes valued through access to medical technologies. © 2014 by the American Anthropological Association.

Representations of Patients' Experiences of Autonomy in Graphic Medicine.

Science.gov (United States)

Tschaepe, Mark

2018-02-01

I advocate using graphic medicine in introductory medical ethics courses to help trainees learn about patients' experiences of autonomy. Graphic narratives about this content offer trainees opportunities to gain insights into making diagnoses and recommending treatments. Graphic medicine can also illuminate aspects of patients' experiences of autonomy differently than other genres. Specifically, comics allow readers to consider visual and text-based representations of a patient's actions, speech, thoughts, and emotions. Here, I use Ellen Forney's Marbles: Mania, Depression, Michelangelo, and Me: A Graphic Memoir and Peter Dunlap-Shohl's My Degeneration: A Journey Through Parkinson's as two examples that can serve as pedagogical resources. © 2018 American Medical Association. All Rights Reserved.

3D Graphics with Spreadsheets

Directory of Open Access Journals (Sweden)

Jan Benacka

2009-06-01

Full Text Available In the article, the formulas for orthographic parallel projection of 3D bodies on computer screen are derived using secondary school vector algebra. The spreadsheet implementation is demonstrated in six applications that project bodies with increasing intricacy – a convex body (cube with non-solved visibility, convex bodies (cube, chapel with solved visibility, a coloured convex body (chapel with solved visibility, and a coloured non-convex body (church with solved visibility. The projections are revolvable in horizontal and vertical plane, and they are changeable in size. The examples show an unusual way of using spreadsheets as a 3D computer graphics tool. The applications can serve as a simple introduction to the general principles of computer graphics, to the graphics with spreadsheets, and as a tool for exercising stereoscopic vision. The presented approach is usable at visualising 3D scenes within some topics of secondary school curricula as solid geometry (angles and distances of lines and planes within simple bodies or analytic geometry in space (angles and distances of lines and planes in E3, and even at university level within calculus at visualising graphs of z = f(x,y functions. Examples are pictured.

Trends in Continuity and Interpolation for Computer Graphics.

Science.gov (United States)

Gonzalez Garcia, Francisco

2015-01-01

In every computer graphics oriented application today, it is a common practice to texture 3D models as a way to obtain realistic material. As part of this process, mesh texturing, deformation, and visualization are all key parts of the computer graphics field. This PhD dissertation was completed in the context of these three important and related fields in computer graphics. The article presents techniques that improve on existing state-of-the-art approaches related to continuity and interpolation in texture space (texturing), object space (deformation), and screen space (rendering).

A Relational Reasoning Approach to Text-Graphic Processing

Science.gov (United States)

Danielson, Robert W.; Sinatra, Gale M.

2017-01-01

We propose that research on text-graphic processing could be strengthened by the inclusion of relational reasoning perspectives. We briefly outline four aspects of relational reasoning: "analogies," "anomalies," "antinomies", and "antitheses". Next, we illustrate how text-graphic researchers have been…

COMPUTER GRAPHICS IN ENGINEERING GRAPHICS DEPARTMENT OF MOSCOW AVIATION INSTITUTE EDUCATIONAL PROCESS

Directory of Open Access Journals (Sweden)

Ludmila P. Bobrik

2013-01-01

Full Text Available Current state of technical universities students’ engineering grounding and “Engineering graphics” course place in MAI are analyzed in this paper. Also bachelor degree problems and experience of creation of issuing specialty based on «Engineering graphics» department are considered. 

Development of a prototype graphic simulation program for severe accident training

International Nuclear Information System (INIS)

Kim, Ko Ryu; Jeong, Kwang Sub; Ha, Jae Joo

2000-05-01

This is a report of the development process and related technologies of severe accident graphic simulators, required in industrial severe accident management and training. Here, we say 'a severe accident graphic simulator' as a graphics add-in system to existing calculation codes, which can show the severe accident phenomena dynamically on computer screens and therefore which can supplement one of main defects of existing calculation codes. With graphic simulators it is fairly easy to see the total behavior of nuclear power plants, where it was very difficult to see only from partial variable numerical information. Moreover, the fast processing and control feature of a graphic simulator can give some opportunities of predicting the severe accident advancement among several possibilities, to one who is not an expert. Utilizing graphic simulators' we expect operators' and TSC members' physical phenomena understanding enhancement from the realistic dynamic behavior of plants. We also expect that severe accident training course can gain better training effects using graphic simulator's control functions and predicting capabilities, and therefore we expect that graphic simulators will be effective decision-aids tools both in sever accident training course and in real severe accident situations. With these in mind, we have developed a prototype graphic simulator having surveyed related technologies, and from this development experiences we have inspected the possibility to build a severe accident graphic simulator. The prototype graphic simulator is developed under IBM PC WinNT environments and is suited to Uljin 3and4 nuclear power plant. When supplied with adequate severe accident scenario as an input, the prototype can provide graphical simulations of plant safety systems' dynamic behaviors. The prototype is composed of several different modules, which are phenomena display module, MELCOR data interface module and graphic database interface module. Main functions of

Fault tree graphics

International Nuclear Information System (INIS)

Bass, L.; Wynholds, H.W.; Porterfield, W.R.

1975-01-01

Described is an operational system that enables the user, through an intelligent graphics terminal, to construct, modify, analyze, and store fault trees. With this system, complex engineering designs can be analyzed. This paper discusses the system and its capabilities. Included is a brief discussion of fault tree analysis, which represents an aspect of reliability and safety modeling

Light reflection models for computer graphics.

Science.gov (United States)

Greenberg, D P

1989-04-14

During the past 20 years, computer graphic techniques for simulating the reflection of light have progressed so that today images of photorealistic quality can be produced. Early algorithms considered direct lighting only, but global illumination phenomena with indirect lighting, surface interreflections, and shadows can now be modeled with ray tracing, radiosity, and Monte Carlo simulations. This article describes the historical development of computer graphic algorithms for light reflection and pictorially illustrates what will be commonly available in the near future.

Alarm annunciation in a graphical environment

International Nuclear Information System (INIS)

Adams, D.G.

1994-01-01

Well-designed graphical user interfaces, such as Microsoft reg-sign Windows trademark or UNIX trademark--based X-Windows reg-sign, provide a capability for enhanced display of security alarm information. Conversely, a poorly designed interface can quickly overwhelm an operator. This paper describes types of graphical information that can be displayed and offers guidance on how to best display that information. Limits are proposed for the complexity of the user interface, and guidelines are suggested for the display of maps and sensors

Living Color Frame System: PC graphics tool for data visualization

Science.gov (United States)

Truong, Long V.

1993-01-01

Living Color Frame System (LCFS) is a personal computer software tool for generating real-time graphics applications. It is highly applicable for a wide range of data visualization in virtual environment applications. Engineers often use computer graphics to enhance the interpretation of data under observation. These graphics become more complicated when 'run time' animations are required, such as found in many typical modern artificial intelligence and expert systems. Living Color Frame System solves many of these real-time graphics problems.

78 FR 63036 - Transmission Planning Reliability Standards

Science.gov (United States)

2013-10-23

... Reliability Standards for the Bulk Power System, 130 FERC ] 61,200 (2010). \\8\\ Mandatory Reliability Standards... electric system operations across normal and contingency conditions. We also find that Reliability Standard... Reliability Standards for the Bulk Power System, 131 FERC ] 61,231 at P 21. Comments 24. NERC supports the...

The Graphical Cadastre Problem in Turkey: The Case of Trabzon Province

Directory of Open Access Journals (Sweden)

Yakup Emre Çoruhlu

2008-09-01

Full Text Available Cadastral projects in Turkey have been accelerated in recent years by the involvement of the private sector. These projects aim at completing the country’s cadastre, along with producing bases in standards that could be a foundation for Land Registry and Cadastre Information System (LRCIS. It is possible to produce cadastral data with today’s technological means. In this context, three dimensional cadastre data can be properly produced, especially in digital cadastre projects with the required point accuracy. Nevertheless this is not enough for LRCIS. The cadastre bases that have been produced so far by different methods with different scales and bases, with or without coordinates, should also be converted into digital form based on National Basic GPS Network of Turkey (NBGN in required point-location accuracy. As the result of evaluation of graphical cadastre bases produced without coordinates, actual land measurements, and information obtained from sheets and field book data together, it was found out that there are significant base problems in the graphical maps. These bases, comprising 20% of Turkey’s cadastre constitutes the most important bottleneck of completing the country’s cadastre. In the scope of this paper, the possibilities of converting the field book measurement values of graphic cadastre bases into digital forms in national coordinate system by comparing them with actual land measurements are investigated, along with Turkey’s Cadastre and its problems.

The Engineering Graphics Olimpiad as a Means for Students’ Creative Professional Competence Formation in the Technical Higher School

Directory of Open Access Journals (Sweden)

N. S. Bushmakina

2013-01-01

Full Text Available The paper is devoted to the creative professional competence development by the technical high school students – the prospective building engineers – by means of the Engineering Graphics Olympiad. The authors in- vestigate the concepts of the creative competences, creative abilities, creative professional competences, and denote the structure of the engineering- graphic competence. Its main components, singled out by the group expert assessment, form the basis for the Olympiad content regarding its selection and major rounds. For the more argumentative selection it is recommended to provide the pedagogic expertise corresponding with the requirements of the Federal State Educational Standards and considering the students’ level. The formation levels of the competence in question are discussed along with the corresponding knowledge and skills. The authors present the brief analysis of the research outcomes and make a conclusion about the necessity of stu- dents’ additional preparatory work regarding the specificity of the engineering graphics training in the technical higher school. 

ABOUT THE ROMANIAN SOCIETY FOR ENGINEERING GRAPHICS

Directory of Open Access Journals (Sweden)

SIMION Ionel

2015-06-01

Full Text Available SORGING is a non-profit, non-governmental society, opened to all professionals interested in Engineering Graphics and Design. It aims to promote the research, development and innovation activities, together with the dissemination of best practices and assistance for educational purposes. In this paper the research and educational activities of the Romanian Society for Engineering Graphics will be briefly reviewed.

Graphic Display Development Program. Volume II, Revision 0. Appendices

International Nuclear Information System (INIS)

1984-12-01

The objective of this project is to demonstrate the feasibility and utility of developing a set of graphic displays to support symptom-based emergency operating procedures (EOPs). Development of generic graphic displays is based on Revision 3 of the symptomatic Emergency Procedure Guidelines (EPGs) prepared by the BWR Owners' Group (BWROG), and development of plant-specific graphic displays is based on a set of emergency operating procedures developed from these EPGs

CT applications of medical computer graphics

International Nuclear Information System (INIS)

Rhodes, M.L.

1985-01-01

Few applications of computer graphics show as much promise and early success as that for CT. Unlike electron microscopy, ultrasound, business, military, and animation applications, CT image data are inherently digital. CT pictures can be processed directly by programs well established in the fields of computer graphics and digital image processing. Methods for reformatting digital pictures, enhancing structure shape, reducing image noise, and rendering three-dimensional (3D) scenes of anatomic structures have all become routine at many CT centers. In this chapter, the authors provide a brief introduction to computer graphics terms and techniques commonly applied to CT pictures and, when appropriate, to those showing promise for magnetic resonance images. Topics discussed here are image-processing options that are applied to digital images already constructed. In the final portion of this chapter techniques for ''slicing'' CT image data are presented, and geometric principles that describe the specification of oblique and curved images are outlined. Clinical examples are included

Graphic medicine: comics as medical narrative.

Science.gov (United States)

Williams, Ian C M

2012-06-01

Among the growing number of works of graphic fiction, a number of titles dealing directly with the patient experience of illness or caring for others with an illness are to be found. Thanks in part to the Medical Humanities movement, many medical schools now encourage the reading of classic literature to gain insight into the human condition. Until recently, the medium of comics (the term is used in the plural to refer to both the physical objects and the attendant philosophy and practice surrounding them) has received little attention from healthcare scholars, even though some authors argue that graphic fiction is, in fact, a form of literature. This paper suggests that it is time that the medium was examined by healthcare professionals and studies some acclaimed comic works. Drawing on the principles of narrative medicine, this paper will ask whether comics and graphic novels could be used as a resource for health professionals, patients and carers.

Graphical Model Theory for Wireless Sensor Networks

International Nuclear Information System (INIS)

Davis, William B.

2002-01-01

Information processing in sensor networks, with many small processors, demands a theory of computation that allows the minimization of processing effort, and the distribution of this effort throughout the network. Graphical model theory provides a probabilistic theory of computation that explicitly addresses complexity and decentralization for optimizing network computation. The junction tree algorithm, for decentralized inference on graphical probability models, can be instantiated in a variety of applications useful for wireless sensor networks, including: sensor validation and fusion; data compression and channel coding; expert systems, with decentralized data structures, and efficient local queries; pattern classification, and machine learning. Graphical models for these applications are sketched, and a model of dynamic sensor validation and fusion is presented in more depth, to illustrate the junction tree algorithm

Learning Layouts for Single-Page Graphic Designs.

Science.gov (United States)

O'Donovan, Peter; Agarwala, Aseem; Hertzmann, Aaron

2014-08-01

This paper presents an approach for automatically creating graphic design layouts using a new energy-based model derived from design principles. The model includes several new algorithms for analyzing graphic designs, including the prediction of perceived importance, alignment detection, and hierarchical segmentation. Given the model, we use optimization to synthesize new layouts for a variety of single-page graphic designs. Model parameters are learned with Nonlinear Inverse Optimization (NIO) from a small number of example layouts. To demonstrate our approach, we show results for applications including generating design layouts in various styles, retargeting designs to new sizes, and improving existing designs. We also compare our automatic results with designs created using crowdsourcing and show that our approach performs slightly better than novice designers.

Graphical Tests for Power Comparison of Competing Designs.

Science.gov (United States)

Hofmann, H; Follett, L; Majumder, M; Cook, D

2012-12-01

Lineups have been established as tools for visual testing similar to standard statistical inference tests, allowing us to evaluate the validity of graphical findings in an objective manner. In simulation studies lineups have been shown as being efficient: the power of visual tests is comparable to classical tests while being much less stringent in terms of distributional assumptions made. This makes lineups versatile, yet powerful, tools in situations where conditions for regular statistical tests are not or cannot be met. In this paper we introduce lineups as a tool for evaluating the power of competing graphical designs. We highlight some of the theoretical properties and then show results from two studies evaluating competing designs: both studies are designed to go to the limits of our perceptual abilities to highlight differences between designs. We use both accuracy and speed of evaluation as measures of a successful design. The first study compares the choice of coordinate system: polar versus cartesian coordinates. The results show strong support in favor of cartesian coordinates in finding fast and accurate answers to spotting patterns. The second study is aimed at finding shift differences between distributions. Both studies are motivated by data problems that we have recently encountered, and explore using simulated data to evaluate the plot designs under controlled conditions. Amazon Mechanical Turk (MTurk) is used to conduct the studies. The lineups provide an effective mechanism for objectively evaluating plot designs.

Measurement of Spatial Ability in an Introductory Graphic Communications Course

Science.gov (United States)

Kelly, Walter F., Jr.

2012-01-01

Published articles on spatial ability can be found in the fields of psychology and graphics education. In the "Engineering Design Graphics Journal" for 1936-1978, six articles concerning visualization (spatial ability) were listed. As published graphics research increased, the journal (1975-1996) listed 28 articles in the visualization…

A graphical interface to the TOUGH family of flow simulators

Energy Technology Data Exchange (ETDEWEB)

O`Sullivan, M.J.; Bullivant, D.P. [Univ. of Auckland (New Zealand)

1995-03-01

A graphical interface for the TOUGH family of simulators is presented. The interface allows the user to graphically create or modify a computer model and then to graphically examine the simulation results. The package uses the X Window System, enabling it to be used on many computer platforms.

Common Graphics Library (CGL). Volume 1: LEZ user's guide

Science.gov (United States)

Taylor, Nancy L.; Hammond, Dana P.; Hofler, Alicia S.; Miner, David L.

1988-01-01

Users are introduced to and instructed in the use of the Langley Easy (LEZ) routines of the Common Graphics Library (CGL). The LEZ routines form an application independent graphics package which enables the user community to view data quickly and easily, while providing a means of generating scientific charts conforming to the publication and/or viewgraph process. A distinct advantage for using the LEZ routines is that the underlying graphics package may be replaced or modified without requiring the users to change their application programs. The library is written in ANSI FORTRAN 77, and currently uses a CORE-based underlying graphics package, and is therefore machine independent, providing support for centralized and/or distributed computer systems.

The influence of graphic format on breast cancer risk communication.

Science.gov (United States)

Schapira, Marilyn M; Nattinger, Ann B; McAuliffe, Timothy L

2006-09-01

Graphic displays can enhance quantitative risk communication. However, empiric data regarding the effect of graphic format on risk perception is lacking. We evaluate the effect of graphic format elements on perceptions of risk magnitude and perceived truth of data. Preferences for format also were assessed. Participants (254 female primary care patients) viewed a series of hypothetical risk communications regarding the lifetime risk of breast cancer. Identical numeric risk information was presented using different graphic formats. Risk was perceived to be of lower magnitude when communicated with a bar graph as compared with a pictorial display (p graphic format used to convey quantitative risk information effects key domains of risk perception. One must be cognizant of these effects when designing risk communication strategies.

2 D 1/2 graphical benchmark

International Nuclear Information System (INIS)

Brochard, P.; Colin De Verdiere, G.; Nomine, J.P.; Perros, J.P.

1993-01-01

Within the framework of the development of a new version of the Psyche software, the author reports a benchmark study on different graphical libraries and systems and on the Psyche application. The author outlines the current context of development of graphical tools which still lacks of standardisation. This makes the comparison somehow limited and finally related to envisaged applications. The author presents the various systems and libraries, test principles, and characteristics of machines. Results and interpretations are then presented with reference to faced problems

Creating a Strong Foundation with Engineering Design Graphics.

Science.gov (United States)

Newcomer, Jeffrey L.; McKell, Eric K.; Raudebaugh, Robert A.; Kelley, David S.

2001-01-01

Describes the two-course engineering design graphics sequence on introductory design and graphics topics. The first course focuses on conceptual design and the development of visualization and sketching skills while the second one concentrates on detail design and parametric modeling. (Contains 28 references.) (Author/ASK)

The Graphical User Interface: Crisis, Danger, and Opportunity.

Science.gov (United States)

Boyd, L. H.; And Others

1990-01-01

This article describes differences between the graphical user interface and traditional character-based interface systems, identifies potential problems posed by graphic computing environments for blind computer users, and describes some programs and strategies that are being developed to provide access to those environments. (Author/JDD)

Canvas Pocket Reference Scripted Graphics for HTML5

CERN Document Server

Flanagan, David

2010-01-01

The Canvas element is a revolutionary feature of HTML5 that enables powerful graphics for rich Internet applications, and this pocket reference provides the essentials you need to put this element to work. If you have working knowledge of JavaScript, this book will help you create detailed, interactive, and animated graphics -- from charts to animations to video games -- whether you're a web designer or a programmer interested in graphics. Canvas Pocket Reference provides both a tutorial that covers all of the element's features with plenty of examples and a definitive reference to each of t

Graphic-enhanced information improves perceived risks of cigar smoking

Science.gov (United States)

Strasser, Andrew A.; Orom, Heather; Tang, Kathy Z.; Dumont, Rachel L.; Cappella, Joseph N.; Kozlowski, Lynn T.

2011-01-01

The internet is a major source of health information and several notable health web sites contain information on the risks associated with cigar smoking. Previous research indicates that internet pages containing health information on cigars have high reading levels and are restricted to text material, which can decrease understanding. We examined the effects of existing text-only (from the United States National Cancer Institute website) versus novel graphic-enhanced information on smokers' perceptions of health risks associated with cigar smoking. The study was a laboratory-based single session of current cigarette smokers (n=102) who viewed cigar smoking risk information on a computer monitor then completed cigar risk questionnaire items. Participants were randomized to view either text-only or graphic-enhanced cigar information. The graphic version contained additional risk information about cigarillos and little cigars. Text-only participants were more likely to underestimate perceived health risks associated with cigar smoking compared to graphic-enhanced participants (47.1% versus 17.7%, p=.001); and, graphic-enhanced participants were more likely to report that they would share the cigar health risk information with friends compared to those viewing text-only, 47.0% versus 27.4%, p=.005. Employing graphics to convey health risks associated with cigar smoking increases understanding and likeliness to share information. Integrating information about little cigars and cigarillos risk in conjunction with large cigar risk information is an effective public health strategy to provide more comprehensive risk information. Utilizing graphics on health information internet pages can increase knowledge and perceived risks of cigar smoking. PMID:21481542

Graphics with Mathematica fractals, Julia sets, patterns and natural forms

CERN Document Server

Getz, Chonat

2004-01-01

In this book we generate graphic images using the software Mathematica thus providing a gentle and enjoyable introduction to this rather technical software and its graphic capabilities. The programs we use for generating these graphics are easily adaptable to many variations.These graphic images are enhanced by introducing a variety of different coloring techniques.Detailed instructions are given for the construction of some interesting 2D and 3D fractals using iterated functions systems as well as the construction of many different types of Julia sets and parameter sets such as the Mandelbrot

VFR Class B Graphics - Aeronautical Information Services Digital Products

Data.gov (United States)

Department of Transportation — These graphics are designed to increase safety and aid pilots in gaining situational awareness within existing and redesigned Class B areas. The graphic provides an...

Development of a National Education and Training Data Standards Strategy and Implementation Plan. Cat. No. EDU 4

Science.gov (United States)

Australian Institute of Health and Welfare, 2015

2015-01-01

The Australian Institute of Health and Welfare developed a national data standards strategy and implementation plan to enhance the comparability, quality and coherence of information across the Australian education and training sectors, including early childhood education, school education, vocational education and training (VET) and higher…

A probabilistic graphical model based stochastic input model construction

International Nuclear Information System (INIS)

Wan, Jiang; Zabaras, Nicholas

2014-01-01

Model reduction techniques have been widely used in modeling of high-dimensional stochastic input in uncertainty quantification tasks. However, the probabilistic modeling of random variables projected into reduced-order spaces presents a number of computational challenges. Due to the curse of dimensionality, the underlying dependence relationships between these random variables are difficult to capture. In this work, a probabilistic graphical model based approach is employed to learn the dependence by running a number of conditional independence tests using observation data. Thus a probabilistic model of the joint PDF is obtained and the PDF is factorized into a set of conditional distributions based on the dependence structure of the variables. The estimation of the joint PDF from data is then transformed to estimating conditional distributions under reduced dimensions. To improve the computational efficiency, a polynomial chaos expansion is further applied to represent the random field in terms of a set of standard random variables. This technique is combined with both linear and nonlinear model reduction methods. Numerical examples are presented to demonstrate the accuracy and efficiency of the probabilistic graphical model based stochastic input models. - Highlights: • Data-driven stochastic input models without the assumption of independence of the reduced random variables. • The problem is transformed to a Bayesian network structure learning problem. • Examples are given in flows in random media

Graphic Grown Up

Science.gov (United States)

Kim, Ann

2009-01-01

It's no secret that children and YAs are clued in to graphic novels (GNs) and that comics-loving adults are positively giddy that this format is getting the recognition it deserves. Still, there is a whole swath of library card-carrying grown-up readers out there with no idea where to start. Splashy movies such as "300" and "Spider-Man" and their…

The IEEE 802.11a standards

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. The IEEE 802.11a standards. Provides higher data rate and system capacities and uses OFDM in Physical Layer to mitigate the multi path effects;. Supports multiple 20Mhz channel. Each channel being an OFDM Modulated;; 52 Carriers. 48 data carrier; 4 Carry pilot ...

Computer Graphics for Student Engagement in Science Learning.

Science.gov (United States)

Cifuentes, Lauren; Hsieh, Yi-Chuan Jane

2001-01-01

Discusses student use of computer graphics software and presents documentation from a visualization workshop designed to help learners use computer graphics to construct meaning while they studied science concepts. Describes problems and benefits when delivering visualization workshops in the natural setting of a middle school. (Author/LRW)

Development of a prototype graphic simulation program for severe accident training

Energy Technology Data Exchange (ETDEWEB)

Kim, Ko Ryu; Jeong, Kwang Sub; Ha, Jae Joo

2000-05-01

This is a report of the development process and related technologies of severe accident graphic simulators, required in industrial severe accident management and training. Here, we say 'a severe accident graphic simulator' as a graphics add-in system to existing calculation codes, which can show the severe accident phenomena dynamically on computer screens and therefore which can supplement one of main defects of existing calculation codes. With graphic simulators it is fairly easy to see the total behavior of nuclear power plants, where it was very difficult to see only from partial variable numerical information. Moreover, the fast processing and control feature of a graphic simulator can give some opportunities of predicting the severe accident advancement among several possibilities, to one who is not an expert. Utilizing graphic simulators' we expect operators' and TSC members' physical phenomena understanding enhancement from the realistic dynamic behavior of plants. We also expect that severe accident training course can gain better training effects using graphic simulator's control functions and predicting capabilities, and therefore we expect that graphic simulators will be effective decision-aids tools both in sever accident training course and in real severe accident situations. With these in mind, we have developed a prototype graphic simulator having surveyed related technologies, and from this development experiences we have inspected the possibility to build a severe accident graphic simulator. The prototype graphic simulator is developed under IBM PC WinNT environments and is suited to Uljin 3and4 nuclear power plant. When supplied with adequate severe accident scenario as an input, the prototype can provide graphical simulations of plant safety systems' dynamic behaviors. The prototype is composed of several different modules, which are phenomena display module, MELCOR data interface module and graphic database

RXY/DRXY-a postprocessing graphical system for scientific computation

International Nuclear Information System (INIS)

Jin Qijie

1990-01-01

Scientific computing require computer graphical function for its visualization. The developing objects and functions of a postprocessing graphical system for scientific computation are described, and also briefly described its implementation