WorldWideScience

Sample records for graphical interactive tool

  1. Data visualization, bar naked: A free tool for creating interactive graphics.

    Science.gov (United States)

    Weissgerber, Tracey L; Savic, Marko; Winham, Stacey J; Stanisavljevic, Dejana; Garovic, Vesna D; Milic, Natasa M

    2017-12-15

    Although bar graphs are designed for categorical data, they are routinely used to present continuous data in studies that have small sample sizes. This presentation is problematic, as many data distributions can lead to the same bar graph, and the actual data may suggest different conclusions from the summary statistics. To address this problem, many journals have implemented new policies that require authors to show the data distribution. This paper introduces a free, web-based tool for creating an interactive alternative to the bar graph (http://statistika.mfub.bg.ac.rs/interactive-dotplot/). This tool allows authors with no programming expertise to create customized interactive graphics, including univariate scatterplots, box plots, and violin plots, for comparing values of a continuous variable across different study groups. Individual data points may be overlaid on the graphs. Additional features facilitate visualization of subgroups or clusters of non-independent data. A second tool enables authors to create interactive graphics from data obtained with repeated independent experiments (http://statistika.mfub.bg.ac.rs/interactive-repeated-experiments-dotplot/). These tools are designed to encourage exploration and critical evaluation of the data behind the summary statistics and may be valuable for promoting transparency, reproducibility, and open science in basic biomedical research. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  2. An interactive graphical tool for exploring sequential dependencies in categorical data

    International Nuclear Information System (INIS)

    Fitzgerald, M.

    1997-01-01

    As monitoring and data storage devices have become cheaper and more readily available, it has become common practice to establish automated monitoring processes which collect enormous amounts of data. For example, in a waste storage facility, waste from several different sources may be combined and stored in a single storage container. Within this unit, many different types of chemical and microbiological reactions may take place over the course of time, not all of which are completely understood. Thus, it is important to monitor the levels of several different chemical compounds within the system, in order to ensure that the waste is being stored safely. The monitoring devices record any anomalous behavior of the system, such as when the presence of a certain chemical compound exceeds some prescribed expectation, the pressure within the container increases beyond a tolerance threshold, the temperature drops more than .5 degree, etc. These monitoring systems may thus collect large quantities of data in fairly short periods of time. The challenge is then to utilize these massive data sets to bring about an understanding of the process and discover potential avenues of intervention. This report describes an interactive graphical tool, written in XLISP-STAT, for exploratory data analysis of dependencies in sequences of categorical data. Both global and local views of the dependency structure can be insightful, and allowing the user the flexibility to change critical parameters and switch between views in a simple, interactive, point-and-click environment can make the task of exploring dependencies among a large number of categories feasible and lead to a better understanding of the sequential properties of the data

  3. The interactive graphic simulator (IGS): A helpful tool for an efficient training

    International Nuclear Information System (INIS)

    Santiago Lucas, A.

    1996-01-01

    The IGS is a natural response, in the training area, to the high technological advances in the computer disciplines for the graphic representations and advanced process models with a high level of reliability and friendliness. Tecnatom has integrated a representation of advanced models in several workstations which permits, through its high resolution colour screens, the visualization of all the information available in control room with graphical representation of NPP's system. Simultaneously with this, the IGS permits to operate any component in order to change its status, in the same way that operations upon the panels. Through the flexibility of the software for graphic representations and the advanced models. Tecnatom has generated, based in the use of IGS, several training courses which have provided a tutorial worth, to understand complex phenomena, with a man-machine interface more friendly than the full scope simulator. Therefore, the IGS appears as an important flexible tool which can adapt itself to the training of several collectives in a NPP, and it has a special importance for those which the ignorance of panels interferes with the training in a full scope simulator. (author)

  4. A new strategic neurosurgical planning tool for brainstem cavernous malformations using interactive computer graphics with multimodal fusion images.

    Science.gov (United States)

    Kin, Taichi; Nakatomi, Hirofumi; Shojima, Masaaki; Tanaka, Minoru; Ino, Kenji; Mori, Harushi; Kunimatsu, Akira; Oyama, Hiroshi; Saito, Nobuhito

    2012-07-01

    In this study, the authors used preoperative simulation employing 3D computer graphics (interactive computer graphics) to fuse all imaging data for brainstem cavernous malformations. The authors evaluated whether interactive computer graphics or 2D imaging correlated better with the actual operative field, particularly in identifying a developmental venous anomaly (DVA). The study population consisted of 10 patients scheduled for surgical treatment of brainstem cavernous malformations. Data from preoperative imaging (MRI, CT, and 3D rotational angiography) were automatically fused using a normalized mutual information method, and then reconstructed by a hybrid method combining surface rendering and volume rendering methods. With surface rendering, multimodality and multithreshold techniques for 1 tissue were applied. The completed interactive computer graphics were used for simulation of surgical approaches and assumed surgical fields. Preoperative diagnostic rates for a DVA associated with brainstem cavernous malformation were compared between conventional 2D imaging and interactive computer graphics employing receiver operating characteristic (ROC) analysis. The time required for reconstruction of 3D images was 3-6 hours for interactive computer graphics. Observation in interactive mode required approximately 15 minutes. Detailed anatomical information for operative procedures, from the craniotomy to microsurgical operations, could be visualized and simulated three-dimensionally as 1 computer graphic using interactive computer graphics. Virtual surgical views were consistent with actual operative views. This technique was very useful for examining various surgical approaches. Mean (±SEM) area under the ROC curve for rate of DVA diagnosis was significantly better for interactive computer graphics (1.000±0.000) than for 2D imaging (0.766±0.091; pcomputer graphics than with 2D images. Interactive computer graphics was also useful in helping to plan the surgical

  5. Interactive Computer Graphics

    Science.gov (United States)

    Kenwright, David

    2000-01-01

    Aerospace data analysis tools that significantly reduce the time and effort needed to analyze large-scale computational fluid dynamics simulations have emerged this year. The current approach for most postprocessing and visualization work is to explore the 3D flow simulations with one of a dozen or so interactive tools. While effective for analyzing small data sets, this approach becomes extremely time consuming when working with data sets larger than one gigabyte. An active area of research this year has been the development of data mining tools that automatically search through gigabyte data sets and extract the salient features with little or no human intervention. With these so-called feature extraction tools, engineers are spared the tedious task of manually exploring huge amounts of data to find the important flow phenomena. The software tools identify features such as vortex cores, shocks, separation and attachment lines, recirculation bubbles, and boundary layers. Some of these features can be extracted in a few seconds; others take minutes to hours on extremely large data sets. The analysis can be performed off-line in a batch process, either during or following the supercomputer simulations. These computations have to be performed only once, because the feature extraction programs search the entire data set and find every occurrence of the phenomena being sought. Because the important questions about the data are being answered automatically, interactivity is less critical than it is with traditional approaches.

  6. Interactive Graphic Journalism

    NARCIS (Netherlands)

    Schlichting, Laura

    2016-01-01

    textabstractThis paper examines graphic journalism (GJ) in a transmedial context, and argues that transmedial graphic journalism (TMGJ) is an important and fruitful new form of visual storytelling, that will re-invigorate the field of journalism, as it steadily tests out and plays with new media,

  7. Interactive Graphic Journalism

    Directory of Open Access Journals (Sweden)

    Laura Schlichting

    2016-12-01

    Full Text Available This paper examines graphic journalism (GJ in a transmedial context, and argues that transmedial graphic journalism (TMGJ is an important and fruitful new form of visual storytelling, that will re-invigorate the field of journalism, as it steadily tests out and plays with new media, ultimately leading to new challenges in both the production and reception process. With TMGJ, linear narratives may be broken up and ethical issues concerning the emotional and entertainment value are raised when it comes to ‘playing the news’. The aesthetic characteristics of TMGJ will be described and interactivity’s influence on non-fiction storytelling will be explored in an analysis of The Nisoor Square Shooting (2011 and Ferguson Firsthand (2015.

  8. Knowledge-based systems and interactive graphics for reactor control using the Automated Reasoning Tool(ART) system

    International Nuclear Information System (INIS)

    Ragheb, M.; Clayton, B.; Davies, P.

    1987-01-01

    The use of Knowledge-Based systems and advanced graphic concepts are described using the Automated Reasoning Tool (ART) for a model nuclear plant system. Through the sue of asynchronous graphic input/output, the user is allowed to communicate through a graphical display to a Production-Rule Analysis System modelling the plant while its rules are actively being fired. The user changes the status of system components by pointing at them on the system configuration display with a mouse cursor and clicking one of the buttons on the mouse. The Production-Rule Analysis System accepts the new input and immediately displays its diagnosis of the system state and any associated recommendations as to the appropriate course of action. This approach offers a distinct advantage over typing the components statuses in response to queries by a conventional Production-Rule Analysis system. Moreover, two effective ways of communication between man and machine are combined

  9. Graphical Acoustic Liner Design and Analysis Tool

    Science.gov (United States)

    Howerton, Brian M. (Inventor); Jones, Michael G. (Inventor)

    2016-01-01

    An interactive liner design and impedance modeling tool comprises software utilized to design acoustic liners for use in constrained spaces, both regularly and irregularly shaped. A graphical user interface allows the acoustic channel geometry to be drawn in a liner volume while the surface impedance calculations are updated and displayed in real-time. A one-dimensional transmission line model may be used as the basis for the impedance calculations.

  10. Evaluating Texts for Graphical Literacy Instruction: The Graphic Rating Tool

    Science.gov (United States)

    Roberts, Kathryn L.; Brugar, Kristy A.; Norman, Rebecca R.

    2015-01-01

    In this article, we present the Graphical Rating Tool (GRT), which is designed to evaluate the graphical devices that are commonly found in content-area, non-fiction texts, in order to identify books that are well suited for teaching about those devices. We also present a "best of" list of science and social studies books, which includes…

  11. Interactive voxel graphics in virtual reality

    Science.gov (United States)

    Brody, Bill; Chappell, Glenn G.; Hartman, Chris

    2002-06-01

    Interactive voxel graphics in virtual reality poses significant research challenges in terms of interface, file I/O, and real-time algorithms. Voxel graphics is not so new, as it is the focus of a good deal of scientific visualization. Interactive voxel creation and manipulation is a more innovative concept. Scientists are understandably reluctant to manipulate data. They collect or model data. A scientific analogy to interactive graphics is the generation of initial conditions for some model. It is used as a method to test those models. We, however, are in the business of creating new data in the form of graphical imagery. In our endeavor, science is a tool and not an end. Nevertheless, there is a whole class of interactions and associated data generation scenarios that are natural to our way of working and that are also appropriate to scientific inquiry. Annotation by sketching or painting to point to and distinguish interesting and important information is very significant for science as well as art. Annotation in 3D is difficult without a good 3D interface. Interactive graphics in virtual reality is an appropriate approach to this problem.

  12. Assemble: an interactive graphical tool to analyze and build RNA architectures at the 2D and 3D levels.

    Science.gov (United States)

    Jossinet, Fabrice; Ludwig, Thomas E; Westhof, Eric

    2010-08-15

    Assemble is an intuitive graphical interface to analyze, manipulate and build complex 3D RNA architectures. It provides several advanced and unique features within the framework of a semi-automated modeling process that can be performed by homology and ab initio with or without electron density maps. Those include the interactive editing of a secondary structure and a searchable, embedded library of annotated tertiary structures. Assemble helps users with performing recurrent and otherwise tedious tasks in structural RNA research. Assemble is released under an open-source license (MIT license) and is freely available at http://bioinformatics.org/assemble. It is implemented in the Java language and runs on MacOSX, Linux and Windows operating systems.

  13. Interactive computer graphics applications for compressible aerodynamics

    Science.gov (United States)

    Benson, Thomas J.

    1994-01-01

    Three computer applications have been developed to solve inviscid compressible fluids problems using interactive computer graphics. The first application is a compressible flow calculator which solves for isentropic flow, normal shocks, and oblique shocks or centered expansions produced by two dimensional ramps. The second application couples the solutions generated by the first application to a more graphical presentation of the results to produce a desk top simulator of three compressible flow problems: 1) flow past a single compression ramp; 2) flow past two ramps in series; and 3) flow past two opposed ramps. The third application extends the results of the second to produce a design tool which solves for the flow through supersonic external or mixed compression inlets. The applications were originally developed to run on SGI or IBM workstations running GL graphics. They are currently being extended to solve additional types of flow problems and modified to operate on any X-based workstation.

  14. Risk Management Collaboration through Sharing Interactive Graphics

    Science.gov (United States)

    Slingsby, Aidan; Dykes, Jason; Wood, Jo; Foote, Matthew

    2010-05-01

    Risk management involves the cooperation of scientists, underwriters and actuaries all of whom analyse data to support decision-making. Results are often disseminated through static documents with graphics that convey the message the analyst wishes to communicate. Interactive graphics are increasingly popular means of communicating the results of data analyses because they enable other parties to explore and visually analyse some of the data themselves prior to and during discussion. Discussion around interactive graphics can occur synchronously in face-to-face meetings or with video-conferencing and screen sharing or they can occur asynchronously through web-sites such as ManyEyes, web-based fora, blogs, wikis and email. A limitation of approaches that do not involve screen sharing is the difficulty in sharing the results of insights from interacting with the graphic. Static images accompanied can be shared but these themselves cannot be interacted, producing a discussion bottleneck (Baker, 2008). We address this limitation by allowing the state and configuration of graphics to be shared (rather than static images) so that a user can reproduce someone else's graphic, interact with it and then share the results of this accompanied with some commentary. HiVE (Slingsby et al, 2009) is a compact and intuitive text-based language that has been designed for this purpose. We will describe the vizTweets project (a 9-month project funded by JISC) in which we are applying these principles to insurance risk management in the context of the Willis Research Network, the world's largest collaboration between the insurance industry and the academia). The project aims to extend HiVE to meet the needs of the sector, design, implement free-available web services and tools and to provide case studies. We will present a case study that demonstrate the potential of this approach for collaboration within the Willis Research Network. Baker, D. Towards Transparency in Visualisation Based

  15. A Graphical Interactive Simulation Environment for Production Planning in Bacon Factories

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

    1994-01-01

    The paper describes a graphical interactive simulation tool for production planning in bacon factories........The paper describes a graphical interactive simulation tool for production planning in bacon factories.....

  16. Interactive Video Courseware for Graphic Communications Teachers and Students.

    Science.gov (United States)

    Sanders, Mark

    1985-01-01

    At Virginia Polytechnic Institute and State University, interactive video serves both as an instructional tool and a project for creative students in graphic communications. The package facilitates courseware development and teaches students simultaneously about microcomputer and video technology. (SK)

  17. Methodology for the interactive graphic simulator construction

    International Nuclear Information System (INIS)

    Milian S, Idalmis; Rodriguez M, Lazaro; Lopez V, Miguel A.

    1997-01-01

    The PC-supported Interactive Graphic Simulators (IGS) have successfully been used for industrial training programs in many countries. This paper is intended to illustrate the general methodology applied by our research team for the construction of this kind of conceptual or small scale simulators. The information and tools available to achieve this goal are also described. The applicability of the present methodology was confirmed with the construction of a set of IGS for nuclear power plants operators training programs in Cuba. One of them, relating reactor kinetics, is shown and briefly described in this paper. (author). 11 refs., 3 figs

  18. GRASP - A Prototype Interactive Graphic Sawing Program - (Forest Products Journal)

    Science.gov (United States)

    Luis G. Occeña; Daniel L. Schmoldt

    1996-01-01

    A versatile microcomputer-based interactive graphics sawing program has been developed as a tool for modeling various hardwood processes, from bucking and topping to log sawing, lumber edging, secondary processing, and even veneering. The microcomputer platform makes the tool affordable and accessible. A solid modeling basis provides the tool with a sound geometrical...

  19. IGUANA Architecture, Framework and Toolkit for Interactive Graphics

    CERN Document Server

    Alverson, G; Muzaffar, S; Osborne, I; Tuura, L A; Taylor, L; Alverson, George; Eulisse, Giulio; Muzaffar, Shahzad; Osborne, Ianna; Tuura, Lassi A.; Taylor, Lucas

    2003-01-01

    IGUANA is a generic interactive visualisation framework based on a C++ component model. It provides powerful user interface and visualisation primitives in a way that is not tied to any particular physics experiment or detector design. The article describes interactive visualisation tools built using IGUANA for the CMS and D0 experiments, as well as generic GEANT4 and GEANT3 applications. It covers features of the graphical user interfaces, 3D and 2D graphics, high-quality vector graphics output for print media, various textual, tabular and hierarchical data views, and integration with the application through control panels, a command line and different multi-threading models.

  20. GUANA Architecture, Framework and Toolkit for Interactive Graphics

    CERN Document Server

    Alverson, G; Muzaffar, S; Osborne, I; Tuura, L A; Taylor, L

    2003-01-01

    IGUANA is a generic interactive visualisation framework based on a C++ component model. It provides powerful user interface and visualisation primitives in a way that is not tied to any particular physics experiment or detector design. The article describes interactive visualisation tools built using IGUANA for the CMS and D0 experiments, as well as generic GEANT4 and GEANT3 applications. It covers features of the graphical user interfaces, 3D and 2D graphics, high-quality vector graphics output for print media, various textual, tabular and hierarchical data views, and integration with the application through control panels, a command line and different multi-threading models.

  1. Toolkit Design for Interactive Structured Graphics

    National Research Council Canada - National Science Library

    Bederson, Benjamin B; Grosjean, Jesse; Meyer, Jon

    2003-01-01

    .... We describe Jazz (a polylithic toolkit) and Piccolo (a monolithic toolkit), each of which we built to support interactive 2D structured graphics applications in general, and Zoomable User Interface applications in particular...

  2. Graphical tools for TV weather presentation

    Science.gov (United States)

    Najman, M.

    2010-09-01

    Contemporary meteorology and its media presentation faces in my opinion following key tasks: - Delivering the meteorological information to the end user/spectator in understandable and modern fashion, which follows industry standard of video output (HD, 16:9) - Besides weather icons show also the outputs of numerical weather prediction models, climatological data, satellite and radar images, observed weather as actual as possible. - Does not compromise the accuracy of presented data. - Ability to prepare and adjust the weather show according to actual synoptic situtation. - Ability to refocus and completely adjust the weather show to actual extreme weather events. - Ground map resolution weather data presentation need to be at least 20 m/pixel to be able to follow the numerical weather prediction model resolution. - Ability to switch between different numerical weather prediction models each day, each show or even in the middle of one weather show. - The graphical weather software need to be flexible and fast. The graphical changes nee to be implementable and airable within minutes before the show or even live. These tasks are so demanding and the usual original approach of custom graphics could not deal with it. It was not able to change the show every day, the shows were static and identical day after day. To change the content of the weather show daily was costly and most of the time impossible with the usual approach. The development in this area is fast though and there are several different options for weather predicting organisations such as national meteorological offices and private meteorological companies to solve this problem. What are the ways to solve it? What are the limitations and advantages of contemporary graphical tools for meteorologists? All these questions will be answered.

  3. MPGT - THE MISSION PLANNING GRAPHICAL TOOL

    Science.gov (United States)

    Jeletic, J. F.

    1994-01-01

    The Mission Planning Graphical Tool (MPGT) provides mission analysts with a mouse driven graphical representation of the spacecraft and environment data used in spaceflight planning. Developed by the Flight Dynamics Division at NASA's Goddard Space Flight Center, MPGT is designed to be a generic tool that can be configured to analyze any specified earth orbiting spacecraft mission. The data is presented as a series of overlays on top of a 2-dimensional or 3-dimensional projection of the earth. Up to six spacecraft orbit tracks can be drawn at one time. Position data can be obtained by either an analytical process or by use of ephemeris files. If the user chooses to propagate the spacecraft orbit using an ephemeris file, then Goddard Trajectory Determination System (GTDS) formatted ephemeris files must be supplied. The MPGT User's Guide provides a complete description of the GTDS ephemeris file format so that users can create their own. Other overlays included are ground station antenna masks, solar and lunar ephemeris, Tracking Data and Relay Satellite System (TDRSS) coverage, a field-of-view swath, and orbit number. From these graphical representations an analyst can determine such spacecraft-related constraints as communication coverage, interference zone infringement, sunlight availability, and instrument target visibility. The presentation of time and geometric data as graphical overlays on a world map makes possible quick analyses of trends and time-oriented parameters. For instance, MPGT can display the propagation of the position of the Sun and Moon over time, shadowing of sunrise/sunset terminators to indicate spacecraft and Earth day/night, and color coding of the spacecraft orbit tracks to indicate spacecraft day/night. With the 3-dimensional display, the user specifies a vector that represents the position in the universe from which the user wishes to view the earth. From these "viewpoint" parameters the user can zoom in on or rotate around the earth

  4. Interactive Learning for Graphic Design Foundations

    Science.gov (United States)

    Chu, Sauman; Ramirez, German Mauricio Mejia

    2012-01-01

    One of the biggest problems for students majoring in pre-graphic design is students' inability to apply their knowledge to different design solutions. The purpose of this study is to examine the effectiveness of interactive learning modules in facilitating knowledge acquisition during the learning process and to create interactive learning modules…

  5. GPFrontend and GPGraphics: graphical analysis tools for genetic association studies.

    Science.gov (United States)

    Uebe, Steffen; Pasutto, Francesca; Krumbiegel, Mandy; Schanze, Denny; Ekici, Arif B; Reis, André

    2010-09-21

    Most software packages for whole genome association studies are non-graphical, purely text based programs originally designed to run with UNIX-like operating systems. Graphical output is often not intended or supposed to be performed with other command line tools, e.g. gnuplot. Using the Microsoft .NET 2.0 platform and Visual Studio 2005, we have created a graphical software package to analyze data from microarray whole genome association studies, both for a DNA-pooling based approach as well as regular single sample data. Part of this package was made to integrate with GenePool 0.8.2, a previously existing software suite for GNU/Linux systems, which we have modified to run in a Microsoft Windows environment. Further modifications cause it to generate some additional data. This enables GenePool to interact with the .NET parts created by us. The programs we developed are GPFrontend, a graphical user interface and frontend to use GenePool and create metadata files for it, and GPGraphics, a program to further analyze and graphically evaluate output of different WGA analysis programs, among them also GenePool. Our programs enable regular MS Windows users without much experience in bioinformatics to easily visualize whole genome data from a variety of sources.

  6. GPFrontend and GPGraphics: graphical analysis tools for genetic association studies

    Directory of Open Access Journals (Sweden)

    Schanze Denny

    2010-09-01

    Full Text Available Abstract Background Most software packages for whole genome association studies are non-graphical, purely text based programs originally designed to run with UNIX-like operating systems. Graphical output is often not intended or supposed to be performed with other command line tools, e.g. gnuplot. Results Using the Microsoft .NET 2.0 platform and Visual Studio 2005, we have created a graphical software package to analyze data from microarray whole genome association studies, both for a DNA-pooling based approach as well as regular single sample data. Part of this package was made to integrate with GenePool 0.8.2, a previously existing software suite for GNU/Linux systems, which we have modified to run in a Microsoft Windows environment. Further modifications cause it to generate some additional data. This enables GenePool to interact with the .NET parts created by us. The programs we developed are GPFrontend, a graphical user interface and frontend to use GenePool and create metadata files for it, and GPGraphics, a program to further analyze and graphically evaluate output of different WGA analysis programs, among them also GenePool. Conclusions Our programs enable regular MS Windows users without much experience in bioinformatics to easily visualize whole genome data from a variety of sources.

  7. A Complete Interactive Graphical Computer-Aided Instruction System.

    Science.gov (United States)

    Abrams, Steven Selby

    The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

  8. Living Color Frame System: PC graphics tool for data visualization

    Science.gov (United States)

    Truong, Long V.

    1993-01-01

    Living Color Frame System (LCFS) is a personal computer software tool for generating real-time graphics applications. It is highly applicable for a wide range of data visualization in virtual environment applications. Engineers often use computer graphics to enhance the interpretation of data under observation. These graphics become more complicated when 'run time' animations are required, such as found in many typical modern artificial intelligence and expert systems. Living Color Frame System solves many of these real-time graphics problems.

  9. Cockpit design and evaluation using interactive graphics

    Science.gov (United States)

    Evans, S. M.

    1975-01-01

    A general overview of the characteristics of an interactive graphics system which was developed to assist cockpit engineers design and evaluate work stations was presented. The manikin used in this COMputerized BIomechanical MAN-model (COMBIMAN) was described, as are provisions for generating work stations and assessing interactions between man and environment. The applications of the present system are explained, and critiques of COMBIMAN are presented. The limitations of the existing programs and the requirements of the designers necessitate future revisions and additions to the biomechanical and erogonomic properties of COMBIMAN. Some of these enhancements are discussed.

  10. Accelerator physics analysis with interactive tools

    International Nuclear Information System (INIS)

    Holt, J.A.; Michelotti, L.

    1993-05-01

    Work is in progress on interactive tools for linear and nonlinear accelerator design, analysis, and simulation using X-based graphics. The BEAMLINE and MXYZPTLK class libraries, were used with an X Windows graphics library to build a program for interactively editing lattices and studying their properties

  11. Interactive computer graphics for stereotactic neurosurgery

    International Nuclear Information System (INIS)

    Goodman, J.H.; Davis, J.R.; Gahbauer, R.A.

    1986-01-01

    A microcomputer (IBM PC/AT) system has been developed to incorporate multiple image sources for stereotactic neurosurgery. Hard copy data is calibrated and captured with a video camera and frame grabber. Line contours are generated automatically on the basis of gray scale density or digitized manually. Interactive computer graphics provide a format with acceptable speed and accuracy for stereotactic neurosurgery. The ability to dimensionally integrate existing image data from multiple sources for target selection makes preoperative scans and scanner compatible head holders unnecessary. The system description and examples of use for brain tumor biopsy and brachytherapy ware presented

  12. Selecting personnel to work on the interactive graphics system

    International Nuclear Information System (INIS)

    Norton, F.J.

    1979-01-01

    The paper established criteria for the selection of personnel to work on the interactive graphics system and mentions some of human behavioral patterns that are created by the implementation of graphic systems. Some of the social and educational problems associated with the interactive graphics system will be discussed. The project also provided for collecting objective data which would be useful in assessing the benefits of interactive graphics systems

  13. Selecting personnel to work on the interactive graphics system

    Energy Technology Data Exchange (ETDEWEB)

    Norton, F.J.

    1979-11-30

    The paper established criteria for the selection of personnel to work on the interactive graphics system and mentions some of human behavioral patterns that are created by the implementation of graphic systems. Some of the social and educational problems associated with the interactive graphics system will be discussed. The project also provided for collecting objective data which would be useful in assessing the benefits of interactive graphics systems.

  14. Interactive Graphics Analysis for Aircraft Design

    Science.gov (United States)

    Townsend, J. C.

    1983-01-01

    Program uses higher-order far field drag minimization. Computer program WDES WDEM preliminary aerodynamic design tool for one or two interacting, subsonic lifting surfaces. Subcritical wing design code employs higher-order far-field drag minimization technique. Linearized aerodynamic theory used. Program written in FORTRAN IV.

  15. Animated analysis of geoscientific datasets: An interactive graphical application

    Science.gov (United States)

    Morse, Peter; Reading, Anya; Lueg, Christopher

    2017-12-01

    Geoscientists are required to analyze and draw conclusions from increasingly large volumes of data. There is a need to recognise and characterise features and changing patterns of Earth observables within such large datasets. It is also necessary to identify significant subsets of the data for more detailed analysis. We present an innovative, interactive software tool and workflow to visualise, characterise, sample and tag large geoscientific datasets from both local and cloud-based repositories. It uses an animated interface and human-computer interaction to utilise the capacity of human expert observers to identify features via enhanced visual analytics. 'Tagger' enables users to analyze datasets that are too large in volume to be drawn legibly on a reasonable number of single static plots. Users interact with the moving graphical display, tagging data ranges of interest for subsequent attention. The tool provides a rapid pre-pass process using fast GPU-based OpenGL graphics and data-handling and is coded in the Quartz Composer visual programing language (VPL) on Mac OSX. It makes use of interoperable data formats, and cloud-based (or local) data storage and compute. In a case study, Tagger was used to characterise a decade (2000-2009) of data recorded by the Cape Sorell Waverider Buoy, located approximately 10 km off the west coast of Tasmania, Australia. These data serve as a proxy for the understanding of Southern Ocean storminess, which has both local and global implications. This example shows use of the tool to identify and characterise 4 different types of storm and non-storm events during this time. Events characterised in this way are compared with conventional analysis, noting advantages and limitations of data analysis using animation and human interaction. Tagger provides a new ability to make use of humans as feature detectors in computer-based analysis of large-volume geosciences and other data.

  16. General aviation design synthesis utilizing interactive computer graphics

    Science.gov (United States)

    Galloway, T. L.; Smith, M. R.

    1976-01-01

    Interactive computer graphics is a fast growing area of computer application, due to such factors as substantial cost reductions in hardware, general availability of software, and expanded data communication networks. In addition to allowing faster and more meaningful input/output, computer graphics permits the use of data in graphic form to carry out parametric studies for configuration selection and for assessing the impact of advanced technologies on general aviation designs. The incorporation of interactive computer graphics into a NASA developed general aviation synthesis program is described, and the potential uses of the synthesis program in preliminary design are demonstrated.

  17. A review of currently available high performance interactive graphics systems

    International Nuclear Information System (INIS)

    Clark, S.A.; Harvey, J.

    1981-12-01

    A survey of several interactive graphics systems is given, all but one of which being based on calligraphic technology, which are being considered for a new High Energy Physics graphics facility at RAL. A brief outline of the system architectures is given, the detailed features being summarised in an appendix, and their relative merits are discussed. (U.K.)

  18. An Interactive Graphics Program for Assistance in Learning Convolution.

    Science.gov (United States)

    Frederick, Dean K.; Waag, Gary L.

    1980-01-01

    A program has been written for the interactive computer graphics facility at Rensselaer Polytechnic Institute that is designed to assist the user in learning the mathematical technique of convolving two functions. Because convolution can be represented graphically by a sequence of steps involving folding, shifting, multiplying, and integration, it…

  19. Learning with Interactive Computer Graphics in the Undergraduate Neuroscience Classroom

    Science.gov (United States)

    Pani, John R.; Chariker, Julia H.; Naaz, Farah; Mattingly, William; Roberts, Joshua; Sephton, Sandra E.

    2014-01-01

    Instruction of neuroanatomy depends on graphical representation and extended self-study. As a consequence, computer-based learning environments that incorporate interactive graphics should facilitate instruction in this area. The present study evaluated such a system in the undergraduate neuroscience classroom. The system used the method of…

  20. Interactive and Animated Scalable Vector Graphics and R Data Displays

    Directory of Open Access Journals (Sweden)

    Deborah Nolan

    2012-01-01

    Full Text Available We describe an approach to creating interactive and animated graphical displays using R's graphics engine and Scalable Vector Graphics, an XML vocabulary for describing two-dimensional graphical displays. We use the svg( graphics device in R and then post-process the resulting XML documents. The post-processing identities the elements in the SVG that correspond to the different components of the graphical display, e.g., points, axes, labels, lines. One can then annotate these elements to add interactivity and animation effects. One can also use JavaScript to provide dynamic interactive effects to the plot, enabling rich user interactions and compelling visualizations. The resulting SVG documents can be embedded withinHTML documents and can involve JavaScript code that integrates the SVG and HTML objects. The functionality is provided via the SVGAnnotation package and makes static plots generated via R graphics functions available as stand-alone, interactive and animated plots for the Web and other venues.

  1. Representation stigma: Perceptions of tools and processes for design graphics

    Directory of Open Access Journals (Sweden)

    David Barbarash

    2016-12-01

    Full Text Available Practicing designers and design students across multiple fields were surveyed to measure preference and perception of traditional hand and digital tools to determine if common biases for an individual toolset are realized in practice. Significant results were found, primarily with age being a determinant in preference of graphic tools and processes; this finding demonstrates a hard line between generations of designers. Results show that while there are strong opinions in tools and processes, the realities of modern business practice and production gravitate towards digital methods despite a traditional tool preference in more experienced designers. While negative stigmas regarding computers remain, younger generations are more accepting of digital tools and images, which should eventually lead to a paradigm shift in design professions.

  2. Use of interactive graphics in bridge analysis and design.

    Science.gov (United States)

    1983-01-01

    This study evaluated the role of computer-aided design (CAD), including interactive graphics, in engineering design applications, especially in the design activities of the Virginia Department of Highways and Transportation. A review of the hardware ...

  3. Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

    Science.gov (United States)

    Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

    1990-01-01

    We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

  4. Interactive graphics for data analysis principles and examples

    CERN Document Server

    Theus, Martin

    2008-01-01

    Introduction PRINCIPLESInteractivity Queries Selection and Linked Highlighting Linking AnalysesInteracting with Graphics Examining a Single Variable Categorical DataContinuous DataTransforming Data Weighted Plots Interactions between Two VariablesTwo Categorical VariablesOne Categorical Variable and One Continuous VariableTwo Continuous VariablesMultidimensional Plots Mosaic PlotsParallel Coordinate Plots Trellis Displays Plot Ensembles and Statistical ModelsResponse ModelsANOVALoglinear ModelsGeographical DataMore Interactivity Sorting and Ordering Zooming Multiple ViewsInteractive Graphics ?

  5. Computer-Based Tools for Evaluating Graphical User Interfaces

    Science.gov (United States)

    Moore, Loretta A.

    1997-01-01

    The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.

  6. Interactive color graphics system for BWR fuel management

    International Nuclear Information System (INIS)

    Reese, A.P.

    1986-01-01

    An interactive color graphics system has been developed by the General Electric Company for fuel management engineers. The system consists of a Hewlett-Packard color graphics workstation in communication with a host mainframe. The system aids in such tasks as fuel cycle optimization, refueling bundle shuffle and control blade sequence design. Since being installed in 1983 turn-around time for a typical cycle reload and control blade pattern design has been reduced by a factor of four

  7. CADRIGS--computer aided design reliability interactive graphics system

    International Nuclear Information System (INIS)

    Kwik, R.J.; Polizzi, L.M.; Sticco, S.; Gerrard, P.B.; Yeater, M.L.; Hockenbury, R.W.; Phillips, M.A.

    1982-01-01

    An integrated reliability analysis program combining graphic representation of fault trees, automated data base loadings and reference, and automated construction of reliability code input files was developed. The functional specifications for CADRIGS, the computer aided design reliability interactive graphics system, are presented. Previously developed fault tree segments used in auxiliary feedwater system safety analysis were constructed on CADRIGS and, when combined, yielded results identical to those resulting from manual input to the same reliability codes

  8. GOKaRT: Graphical Online Search Tool for Maps

    Directory of Open Access Journals (Sweden)

    Mechthild Schüler

    2008-09-01

    Full Text Available The map department of the Staats- und Universitätsbibliothek Göttingen together with the Berlin State Library propose a project to develop a web-based graphic cataloguing and search system for maps, to be funded by the German Research Foundation. This tool shall be made available to all map holdings in archives, libraries, university departments and museums in Germany as a comfortable means for the administration of map holdings and as a search tool. Sheets belonging to map series as well as single maps (old and new will be registered cooperatively by the participants with simple tools. This cooperation in data maintenance will facilitate the work especially for understaffed map holdings. Depending on the type of map there are four different mechanisms for map reference. For map series electronic index sheets are used which will show information regarding the various issues of the map sheets. Due to the intuitive graphic search entry GOKaRT-users will easily find the required maps of a certain region available in a chosen holding. User administration modules ensure comfortable handling. GOKaRT is being developed on the basis of licence-free open source programmes. In case financing is provided by the German Research Foundation, GOKaRT can be used free of charge internationally. This would require a contract stipulating data exchange between the partners as well as permanent storage and usability of the data.

  9. 3D data processing with advanced computer graphics tools

    Science.gov (United States)

    Zhang, Song; Ekstrand, Laura; Grieve, Taylor; Eisenmann, David J.; Chumbley, L. Scott

    2012-09-01

    Often, the 3-D raw data coming from an optical profilometer contains spiky noises and irregular grid, which make it difficult to analyze and difficult to store because of the enormously large size. This paper is to address these two issues for an optical profilometer by substantially reducing the spiky noise of the 3-D raw data from an optical profilometer, and by rapidly re-sampling the raw data into regular grids at any pixel size and any orientation with advanced computer graphics tools. Experimental results will be presented to demonstrate the effectiveness of the proposed approach.

  10. TIGER: A graphically interactive grid system for turbomachinery applications

    Science.gov (United States)

    Shih, Ming-Hsin; Soni, Bharat K.

    1992-01-01

    Numerical grid generation algorithm associated with the flow field about turbomachinery geometries is presented. Graphical user interface is developed with FORMS Library to create an interactive, user-friendly working environment. This customized algorithm reduces the man-hours required to generate a grid associated with turbomachinery geometry, as compared to the use of general-purpose grid generation softwares. Bezier curves are utilized both interactively and automatically to accomplish grid line smoothness and orthogonality. Graphical User Interactions are provided in the algorithm, allowing the user to design and manipulate the grid lines with a mouse.

  11. Simulation of Robot Kinematics Using Interactive Computer Graphics.

    Science.gov (United States)

    Leu, M. C.; Mahajan, R.

    1984-01-01

    Development of a robot simulation program based on geometric transformation softwares available in most computer graphics systems and program features are described. The program can be extended to simulate robots coordinating with external devices (such as tools, fixtures, conveyors) using geometric transformations to describe the…

  12. PC graphics generation and management tool for real-time applications

    Science.gov (United States)

    Truong, Long V.

    1992-01-01

    A graphics tool was designed and developed for easy generation and management of personal computer graphics. It also provides methods and 'run-time' software for many common artificial intelligence (AI) or expert system (ES) applications.

  13. Design, testing, and delivery of an interactive graphics display subsystem

    Science.gov (United States)

    Holmes, B.

    1973-01-01

    An interactive graphics display system was designed to be used in locating components on a printed circuit card and outputting data concerning their thermal values. The manner in which this was accomplished in terms of both hardware and software is described. An analysis of the accuracy of this approach is also included.

  14. Interactive computer graphics for bio-stereochemical modelling

    Indian Academy of Sciences (India)

    Proc, Indian Acad. Sci., Vol. 87 A (Chem. Sci.), No. 4, April 1978, pp. 95-113, (e) printed in India. Interactive computer graphics for bio-stereochemical modelling. ROBERT REIN, SHLOMONIR, KAREN HAYDOCK and. ROBERTD MACELROY. Department of Experimental Pathology, Roswell Park Memorial Institute,. 666 Elm ...

  15. Evaluating comfort with varying temperatures: a graphic design tool

    Energy Technology Data Exchange (ETDEWEB)

    Evans, J.M. [Research Centre Habitat and Energy, Faculty of Architecture, Design and Urbanism, University of Buenos Aires, Ciudad Universitaria (Argentina)

    2002-07-01

    This paper considers the need to define comfort of indoor and outdoor spaces in relation to the daily variations of temperature. A graphical tool is presented, which indicates the daily swings of temperature, shown as a single point on a graph representing the average temperature and the maximum temperature swing. This point can be compared with the comfort zones for different activity levels, such as sedentary activity, sleeping, indoor and outdoor circulation according to the design proposals for different spaces. The graph allows the representation of climatic variables, the definition of comfort zones, the selection of bio climatic design resources and the evaluation of indoor temperatures, measured in actual buildings or obtained from computer simulations. The development of the graph is explained and examples given with special emphasis on the use of thermal mass. (author)

  16. High performance interactive graphics for shower reconstruction in HPC, the DELPHI barrel electromagnetic calorimeter

    International Nuclear Information System (INIS)

    Stanescu, C.

    1990-01-01

    Complex software for shower reconstruction in DELPHI barrel electromagnetic calorimeter which deals, for each event, with great amounts of information, due to the high spatial resolution of this detector, needs powerful verification tools. An interactive graphics program, running on high performance graphics display system Whizzard 7555 from Megatek, was developed to display the logical steps in showers and their axes reconstruction. The program allows both operations on the image in real-time (rotation, translation and zoom) and the use of non-geometrical criteria to modify it (as the use of energy) thresholds for the representation of the elements that compound the showers (or of the associated lego plots). For this purpose graphics objects associated to user parameters were defined. Instancing and modelling features of the native graphics library were extensively used

  17. Implementation of a graphical user interface for the virtual multifrequency spectrometer: The VMS-Draw tool.

    Science.gov (United States)

    Licari, Daniele; Baiardi, Alberto; Biczysko, Malgorzata; Egidi, Franco; Latouche, Camille; Barone, Vincenzo

    2015-02-15

    This article presents the setup and implementation of a graphical user interface (VMS-Draw) for a virtual multifrequency spectrometer. Special attention is paid to ease of use, generality and robustness for a panel of spectroscopic techniques and quantum mechanical approaches. Depending on the kind of data to be analyzed, VMS-Draw produces different types of graphical representations, including two-dimensional or three-dimesional (3D) plots, bar charts, or heat maps. Among other integrated features, one may quote the convolution of stick spectra to obtain realistic line-shapes. It is also possible to analyze and visualize, together with the structure, the molecular orbitals and/or the vibrational motions of molecular systems thanks to 3D interactive tools. On these grounds, VMS-Draw could represent a useful additional tool for spectroscopic studies integrating measurements and computer simulations. Copyright © 2014 Wiley Periodicals, Inc.

  18. Transportable Applications Environment (TAE) Plus: A NASA tool used to develop and manage graphical user interfaces

    Science.gov (United States)

    Szczur, Martha R.

    1992-01-01

    The Transportable Applications Environment (TAE) Plus was built to support the construction of graphical user interfaces (GUI's) for highly interactive applications, such as real-time processing systems and scientific analysis systems. It is a general purpose portable tool that includes a 'What You See Is What You Get' WorkBench that allows user interface designers to layout and manipulate windows and interaction objects. The WorkBench includes both user entry objects (e.g., radio buttons, menus) and data-driven objects (e.g., dials, gages, stripcharts), which dynamically change based on values of realtime data. Discussed here is what TAE Plus provides, how the implementation has utilized state-of-the-art technologies within graphic workstations, and how it has been used both within and without NASA.

  19. Distributed interactive graphics applications in computational fluid dynamics

    International Nuclear Information System (INIS)

    Rogers, S.E.; Buning, P.G.; Merritt, F.J.

    1987-01-01

    Implementation of two distributed graphics programs used in computational fluid dynamics is discussed. Both programs are interactive in nature. They run on a CRAY-2 supercomputer and use a Silicon Graphics Iris workstation as the front-end machine. The hardware and supporting software are from the Numerical Aerodynamic Simulation project. The supercomputer does all numerically intensive work and the workstation, as the front-end machine, allows the user to perform real-time interactive transformations on the displayed data. The first program was written as a distributed program that computes particle traces for fluid flow solutions existing on the supercomputer. The second is an older post-processing and plotting program modified to run in a distributed mode. Both programs have realized a large increase in speed over that obtained using a single machine. By using these programs, one can learn quickly about complex features of a three-dimensional flow field. Some color results are presented

  20. Investigating the Interaction of Graphic Organizers and Seductive Details: Can a Graphic Organizer Mitigate the Seductive-Details Effect?

    Science.gov (United States)

    Rowland-Bryant, Emily; Skinner, Christopher H.; Skinner, Amy L.; Saudargas, Richard; Robinson, Daniel H.; Kirk, Emily R.

    2009-01-01

    The interaction between seductive details (SD) and a graphic organizer (GO) was investigated. Undergraduate students (n = 207) read a target-material passage about Freud's psychosexual stages. Depending on condition, the participants also read a biographical paragraph (SD-only), viewed a graphic organizer that linked the seductive details to the…

  1. Interactive graphics analysis system for nuclear engineering applications

    International Nuclear Information System (INIS)

    Danchak, M.; Moyer, W.R.; Becker, M.

    1973-01-01

    From working with continuous slowing down theory, the need was recognized for a system which allowed rapid calculation of the theoretical flux, instant comparison with experiment and a simple means of iterating on the slowing down parameters to force flux agreement and reflect cross section modification. Similar requirements exist in other areas of nuclear work for streamlining and simplifying the data analysis process. As a solution, a unique interactive graphics analysis system (RIGAS) was devised to allow a user to calculate, display, compare, manipulate and modify his data without requiring any programming on his part. This was accomplished by establishing human primacy, through extensive human factor considerations, and designing a man-machine dialogue which responds to the mere push of a button. This system results in an instrument which maximizes man's decision making capability and the computer's speed to improve graphic communication and data analysis. (14 figs) (U.S.)

  2. Packaging printed circuit boards: A production application of interactive graphics

    Science.gov (United States)

    Perrill, W. A.

    1975-01-01

    The structure and use of an Interactive Graphics Packaging Program (IGPP), conceived to apply computer graphics to the design of packaging electronic circuits onto printed circuit boards (PCB), were described. The intent was to combine the data storage and manipulative power of the computer with the imaginative, intuitive power of a human designer. The hardware includes a CDC 6400 computer and two CDC 777 terminals with CRT screens, light pens, and keyboards. The program is written in FORTRAN 4 extended with the exception of a few functions coded in COMPASS (assembly language). The IGPP performs four major functions for the designer: (1) data input and display, (2) component placement (automatic or manual), (3) conductor path routing (automatic or manual), and (4) data output. The most complex PCB packaged to date measured 16.5 cm by 19 cm and contained 380 components, two layers of ground planes and four layers of conductors mixed with ground planes.

  3. NGLview-interactive molecular graphics for Jupyter notebooks.

    Science.gov (United States)

    Nguyen, Hai; Case, David A; Rose, Alexander S

    2018-04-01

    NGLview is a Jupyter/IPython widget to interactively view molecular structures as well as trajectories from molecular dynamics simulations. Fast and scalable molecular graphics are provided through the NGL Viewer. The widget supports showing data from the file-system, online data bases and from objects of many popular analysis libraries including mdanalysis, mdtraj, pytraj, rdkit and more. The source code is freely available under the MIT license at https://github.com/arose/nglview. Python packages are available from PyPI and bioconda. NGLview uses Python on the server-side and JavaScript on the client. The integration with Jupyter is done through the ipywidgets package. The NGL Viewer is embedded client-side to provide WebGL accelerated molecular graphics. asr.moin@gmail.com.

  4. Developing a Graphical User Interface for the ALSS Crop Planning Tool

    Science.gov (United States)

    Koehlert, Erik

    1997-01-01

    The goal of my project was to create a graphical user interface for a prototype crop scheduler. The crop scheduler was developed by Dr. Jorge Leon and Laura Whitaker for the ALSS (Advanced Life Support System) program. The addition of a system-independent graphical user interface to the crop planning tool will make the application more accessible to a wider range of users and enhance its value as an analysis, design, and planning tool. My presentation will demonstrate the form and functionality of this interface. This graphical user interface allows users to edit system parameters stored in the file system. Data on the interaction of the crew, crops, and waste processing system with the available system resources is organized and labeled. Program output, which is stored in the file system, is also presented to the user in performance-time plots and organized charts. The menu system is designed to guide the user through analysis and decision making tasks, providing some help if necessary. The Java programming language was used to develop this interface in hopes of providing portability and remote operation.

  5. Interactive graphical analyzer based on RELAP5/MOD3.2-NPA

    International Nuclear Information System (INIS)

    Posada, J.M.; Martin, M.; Reventos, F.; Llopis, C.

    1999-01-01

    The work presented in this paper consists on the development of a Graphical Interactive Analyzer for Asco (two units) and Vandellos (one unit) Nuclear Power Plants, all of them are three loop Westinghouse PWR with rated electrical power around 1000 Mwe. Basic steps are: Development of the thermal-hydraulic and kinetic model for RELAP5/mod3.2 corresponding to NSSS, Steam Flow paths from Steam Generators to Turbine and Condenser, Feedwater System, Emergency Core Cooling System; and related protection and control systems. Development of Graphical representation, for NPA-1.3.4., to permit the user interact with the model. Validation against experimental data. The result is an engineering tool that can help on Plant transient analysis, and on the study of modifications proposed on the components simulated; it's also a powerful tool for operator teaching. (author)

  6. Graphical analysis of NMR structural quality and interactive contact map of NOE assignments in ARIA

    Directory of Open Access Journals (Sweden)

    Malliavin Thérèse E

    2008-06-01

    Full Text Available Abstract Background The Ambiguous Restraints for Iterative Assignment (ARIA approach is widely used for NMR structure determination. It is based on simultaneously calculating structures and assigning NOE through an iterative protocol. The final solution consists of a set of conformers and a list of most probable assignments for the input NOE peak list. Results ARIA was extended with a series of graphical tools to facilitate a detailed analysis of the intermediate and final results of the ARIA protocol. These additional features provide (i an interactive contact map, serving as a tool for the analysis of assignments, and (ii graphical representations of structure quality scores and restraint statistics. The interactive contact map between residues can be clicked to obtain information about the restraints and their contributions. Profiles of quality scores are plotted along the protein sequence, and contact maps provide information of the agreement with the data on a residue pair level. Conclusion The graphical tools and outputs described here significantly extend the validation and analysis possibilities of NOE assignments given by ARIA as well as the analysis of the quality of the final structure ensemble. These tools are included in the latest version of ARIA, which is available at http://aria.pasteur.fr. The Web site also contains an installation guide, a user manual and example calculations.

  7. Neurosurgical simulation by interactive computer graphics on iPad.

    Science.gov (United States)

    Maruyama, Keisuke; Kin, Taichi; Saito, Toki; Suematsu, Shinya; Gomyo, Miho; Noguchi, Akio; Nagane, Motoo; Shiokawa, Yoshiaki

    2014-11-01

    Presurgical simulation before complicated neurosurgery is a state-of-the-art technique, and its usefulness has recently become well known. However, simulation requires complex image processing, which hinders its widespread application. We explored handling the results of interactive computer graphics on the iPad tablet, which can easily be controlled anywhere. Data from preneurosurgical simulations from 12 patients (4 men, 8 women) who underwent complex brain surgery were loaded onto an iPad. First, DICOM data were loaded using Amira visualization software to create interactive computer graphics, and ParaView, another free visualization software package, was used to convert the results of the simulation to be loaded using the free iPad software KiwiViewer. The interactive computer graphics created prior to neurosurgery were successfully displayed and smoothly controlled on the iPad in all patients. The number of elements ranged from 3 to 13 (mean 7). The mean original data size was 233 MB, which was reduced to 10.4 MB (4.4% of original size) after image processing by ParaView. This was increased to 46.6 MB (19.9%) after decompression in KiwiViewer. Controlling the magnification, transfer, rotation, and selection of translucence in 10 levels of each element were smoothly and easily performed using one or two fingers. The requisite skill to smoothly control the iPad software was acquired within 1.8 trials on average in 12 medical students and 6 neurosurgical residents. Using an iPad to handle the result of preneurosurgical simulation was extremely useful because it could easily be handled anywhere.

  8. Omeups: an interactive graphics program for analysing collision data

    International Nuclear Information System (INIS)

    Burgess, A.; Mason, H.E.; Tully, J.A.

    1991-01-01

    The aim of the micro-computer program OMEUPS is to provide a simple means of critically assessing and compacting collision strength data for electron impact excitation of positive ions. The program is interactive and allows data to be analysed graphically: it should be of particular interest to astrophysicists as well as to those specialising in atomic physics. The method on which the program is based allows one to interpolate or extrapolate existing data in energy and temperature; store data in compact form without losing significant information; perform Maxwell averaging; detect printing and computational errors in tabulated data

  9. Light & Skin Interactions Simulations for Computer Graphics Applications

    CERN Document Server

    Baranoski, Gladimir V G

    2010-01-01

    Light and Skin Interactions immerses you in one of the most fascinating application areas of computer graphics: appearance simulation. The book first illuminates the fundamental biophysical processes that affect skin appearance, and reviews seminal related works aimed at applications in life and health sciences. It then examines four exemplary modeling approaches as well as definitive algorithms that can be used to generate realistic images depicting skin appearance. An accompanying companion site also includes complete code and data sources for the BioSpec model, which is considered to be the

  10. Interactive simulation of nuclear power systems using a dedicated minicomputer - computer graphics facility

    International Nuclear Information System (INIS)

    Tye, C.; Sezgen, A.O.

    1980-01-01

    The design of control systems and operational procedures for large scale nuclear power plant poses a difficult optimization problem requiring a lot of computational effort. Plant dynamic simulation using digital minicomputers offers the prospect of relatively low cost computing and when combined with graphical input/output provides a powerful tool for studying such problems. The paper discusses the results obtained from a simulation study carried out at the Computer Graphics Unit of the University of Manchester using a typical station control model for an Advanced Gas Cooled reactor. Particular reference is placed on the use of computer graphics for information display, parameter and control system optimization and techniques for using graphical input for defining and/or modifying the control system topology. Experience gained from this study has shown that a relatively modest minicomputer system can be used for simulating large scale dynamic systems and that highly interactive computer graphics can be used to advantage to relieve the designer of many of the tedious aspects of simulation leaving him free to concentrate on the more creative aspects of his work. (author)

  11. Computer Art--A New Tool in Advertising Graphics.

    Science.gov (United States)

    Wassmuth, Birgit L.

    Using computers to produce art began with scientists, mathematicians, and individuals with strong technical backgrounds who used the graphic material as visualizations of data in technical fields. People are using computer art in advertising, as well as in painting; sculpture; music; textile, product, industrial, and interior design; architecture;…

  12. Vega-Lite: A Grammar of Interactive Graphics.

    Science.gov (United States)

    Satyanarayan, Arvind; Moritz, Dominik; Wongsuphasawat, Kanit; Heer, Jeffrey

    2017-01-01

    We present Vega-Lite, a high-level grammar that enables rapid specification of interactive data visualizations. Vega-Lite combines a traditional grammar of graphics, providing visual encoding rules and a composition algebra for layered and multi-view displays, with a novel grammar of interaction. Users specify interactive semantics by composing selections. In Vega-Lite, a selection is an abstraction that defines input event processing, points of interest, and a predicate function for inclusion testing. Selections parameterize visual encodings by serving as input data, defining scale extents, or by driving conditional logic. The Vega-Lite compiler automatically synthesizes requisite data flow and event handling logic, which users can override for further customization. In contrast to existing reactive specifications, Vega-Lite selections decompose an interaction design into concise, enumerable semantic units. We evaluate Vega-Lite through a range of examples, demonstrating succinct specification of both customized interaction methods and common techniques such as panning, zooming, and linked selection.

  13. Reactor FaceMap Tool: A modern graphics tool for displaying reactor data

    International Nuclear Information System (INIS)

    Roberts, J.C.

    1991-01-01

    A prominent graphical user interface in reactor physics applications at the Savannah River Site is the reactor facemap display. This is a two dimensional view of a cross section of a reactor. In the past each application which needed a facemap implemented its own version. Thus, none of the code was reused, the facemap implementation was hardware dependent and the user interface was different for each facemap. The Reactor FaceMap Tool was built to solve these problems. Through the use of modern computing technologies such as X Windows, object-oriented programming and client/server technology the Reactor FaceMap Tool has the flexibility to work in many diverse applications and the portability to run on numerous types of hardware

  14. GeoCrystal: graphic-interactive access to geodata archives

    Science.gov (United States)

    Goebel, Stefan; Haist, Joerg; Jasnoch, Uwe

    2002-03-01

    Recently there is spent a lot of effort to establish information systems and global infrastructures enabling both data suppliers and users to describe (-> eCommerce, metadata) as well as to find appropriate data. Examples for this are metadata information systems, online-shops or portals for geodata. The main disadvantages of existing approaches are insufficient methods and mechanisms leading users to (e.g. spatial) data archives. This affects aspects concerning usability and personalization in general as well as visual feedback techniques in the different steps of the information retrieval process. Several approaches aim at the improvement of graphical user interfaces by using intuitive metaphors, but only some of them offer 3D interfaces in the form of information landscapes or geographic result scenes in the context of information systems for geodata. This paper presents GeoCrystal, which basic idea is to adopt Venn diagrams to compose complex queries and to visualize search results in a 3D information and navigation space for geodata. These concepts are enhanced with spatial metaphors and 3D information landscapes (library for geodata) wherein users can specify searches for appropriate geodata and are enabled to graphic-interactively communicate with search results (book metaphor).

  15. The effects of 3D interactive animated graphics on student learning and attitudes in computer-based instruction

    Science.gov (United States)

    Moon, Hye Sun

    Visuals are most extensively used as instructional tools in education to present spatially-based information. Recent computer technology allows the generation of 3D animated visuals to extend the presentation in computer-based instruction. Animated visuals in 3D representation not only possess motivational value that promotes positive attitudes toward instruction but also facilitate learning when the subject matter requires dynamic motion and 3D visual cue. In this study, three questions are explored: (1) how 3D graphics affects student learning and attitude, in comparison with 2D graphics; (2) how animated graphics affects student learning and attitude, in comparison with static graphics; and (3) whether the use of 3D graphics, when they are supported by interactive animation, is the most effective visual cues to improve learning and to develop positive attitudes. A total of 145 eighth-grade students participated in a 2 x 2 factorial design study. The subjects were randomly assigned to one of four computer-based instructions: 2D static; 2D animated; 3D static; and 3D animated. The results indicated that: (1) Students in the 3D graphic condition exhibited more positive attitudes toward instruction than those in the 2D graphic condition. No group differences were found between the posttest score of 3D graphic condition and that of 2D graphic condition. However, students in the 3D graphic condition took less time for information retrieval on posttest than those in the 2D graphic condition. (2) Students in the animated graphic condition exhibited slightly more positive attitudes toward instruction than those in the static graphic condition. No group differences were found between the posttest score of animated graphic condition and that of static graphic condition. However, students in the animated graphic condition took less time for information retrieval on posttest than those in the static graphic condition. (3) Students in the 3D animated graphic condition

  16. Graphical User Interface Tool Kit for Path-Based Network Policy Language

    National Research Council Canada - National Science Library

    Ekin, Tufan

    2002-01-01

    .... Two of the changes are related to the semantics of the language. A graphical user interface tool kit for creating, validating, archiving and compiling policies represented in PPL has been developed...

  17. Sikorsky interactive graphics surface design/manufacturing system

    Science.gov (United States)

    Robbins, R.

    1975-01-01

    An interactive graphics system conceived to be used in the design, analysis, and manufacturing of aircraft components with free form surfaces was described. In addition to the basic surface definition and viewing capabilities inherent in such a system, numerous other features are present: surface editing, automated smoothing of control curves, variable milling patch boundary definitions, surface intersection definition and viewing, automatic creation of true offset surfaces, digitizer and drafting machine interfaces, and cutter path optimization. Documented costs and time savings of better than six to one are being realized with this system. The system was written in FORTRAN and GSP for use on IBM 2250 CRT's in conjunction with an IBM 370/158 computer.

  18. Interactive computer graphics displays for hierarchical data structures

    International Nuclear Information System (INIS)

    Cahn, D.F.; Murano, C.V.

    1980-05-01

    An interactive computer graphical display program was developed as an aid to user visualization and manipulation of hierarchically structured data systems such as thesauri. In the present configuration, a thesaurus term and its primary and secondary conceptual neighbors are presented to the user in tree graph form on a CRT; the user then designates, via light pen or keyboard, any of the neighbors as the next term of interest and receives a new display centered on this term. By successive specification of broader, narrower, and related terms, the user can course rapidly through the thesaurus space and refine his search file. At any stage, he deals with a term-centered, conceptually meaningful picture of a localized portion of the thesaurus, and is freed from the artificial difficulties of handling the traditional alphabetized thesaurus. Intentional limitation of the associative range of each display frame, and the use of color, case, and interconnecting vectors to encode relationships among terms, enhance interpretability of the display. Facile movement through the term space, provided by interactive computation, allows the display to remain simple, and is an essential element of the system. 3 figures

  19. E-Block: A Tangible Programming Tool with Graphical Blocks

    OpenAIRE

    Danli Wang; Yang Zhang; Shengyong Chen

    2013-01-01

    This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transfer...

  20. Comparison of Automated Graphical User Interface Testing Tools

    OpenAIRE

    Gaber, Domen

    2018-01-01

    The thesis presents the analysis of modern tools for automated testing of various web based user interfaces. The purpose of the work is to compare specific test automation solutions and point out the most suitable test automation tool amongst them. One of the main goals of test automation is to gain faster execution when compared to manual testing and overall cost deduction. There are multiple test automation solutions available on the market, which differ in complexity of use, type of o...

  1. E-Block: A Tangible Programming Tool with Graphical Blocks

    Directory of Open Access Journals (Sweden)

    Danli Wang

    2013-01-01

    Full Text Available This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transferred to computer by microcomputers and then translated into semantic information. The system applies wireless and infrared technologies and provides user with feedbacks on both screen and programming blocks. Preliminary user studies using observation and user interview methods are shown for E-Block's prototype. The test results prove that E-Block is attractive to children and easy to learn and use. The project also highlights potential advantages of using single chip microcomputer (SCM technology to develop tangible programming tools for children.

  2. RAFCON: A Graphical Tool for Engineering Complex, Robotic Tasks

    Science.gov (United States)

    2016-10-09

    manipulation , vision, navigation, etc.). All these components need to be coordi- nated both in terms of communication and task flow. ROS [1] is a common...editing, is an important supportive feature of a programming tool for robots. How- ever, this is not an easy feature to achieve, as bigger state... children of a HierarchyState can be considered as a flat state machine on its own with a single entry state. ConcurrencyStates are also ContainerStates

  3. Improving aircraft conceptual design - A PHIGS interactive graphics interface for ACSYNT

    Science.gov (United States)

    Wampler, S. G.; Myklebust, A.; Jayaram, S.; Gelhausen, P.

    1988-01-01

    A CAD interface has been created for the 'ACSYNT' aircraft conceptual design code that permits the execution and control of the design process via interactive graphics menus. This CAD interface was coded entirely with the new three-dimensional graphics standard, the Programmer's Hierarchical Interactive Graphics System. The CAD/ACSYNT system is designed for use by state-of-the-art high-speed imaging work stations. Attention is given to the approaches employed in modeling, data storage, and rendering.

  4. A computer graphics pilot project - Spacecraft mission support with an interactive graphics workstation

    Science.gov (United States)

    Hagedorn, John; Ehrner, Marie-Jacqueline; Reese, Jodi; Chang, Kan; Tseng, Irene

    1986-01-01

    The NASA Computer Graphics Pilot Project was undertaken to enhance the quality control, productivity and efficiency of mission support operations at the Goddard Operations Support Computing Facility. The Project evolved into a set of demonstration programs for graphics intensive simulated control room operations, particularly in connection with the complex space missions that began in the 1980s. Complex mission mean more data. Graphic displays are a means to reduce the probabilities of operator errors. Workstations were selected with 1024 x 768 pixel color displays controlled by a custom VLSI chip coupled to an MC68010 chip running UNIX within a shell that permits operations through the medium of mouse-accessed pulldown window menus. The distributed workstations run off a host NAS 8040 computer. Applications of the system for tracking spacecraft orbits and monitoring Shuttle payload handling illustrate the system capabilities, noting the built-in capabilities of shifting the point of view and rotating and zooming in on three-dimensional views of spacecraft.

  5. Using Interactive Graphics to Teach Multivariate Data Analysis to Psychology Students

    Science.gov (United States)

    Valero-Mora, Pedro M.; Ledesma, Ruben D.

    2011-01-01

    This paper discusses the use of interactive graphics to teach multivariate data analysis to Psychology students. Three techniques are explored through separate activities: parallel coordinates/boxplots; principal components/exploratory factor analysis; and cluster analysis. With interactive graphics, students may perform important parts of the…

  6. Web-based (HTML5) interactive graphics for fusion research and collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Kim, E.N., E-mail: kimny@fusion.gat.com [General Atomics, P.O. Box 85608, San Diego, CA (United States); Schissel, D.P.; Abla, G.; Flanagan, S.; Lee, X. [General Atomics, P.O. Box 85608, San Diego, CA (United States)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Interactive data visualization is supported via the Web without a browser plugin and provides users easy, real-time access to data of different types from various locations. Black-Right-Pointing-Pointer Crosshair, zoom, pan as well as toggling dimensionality and a slice bar for multi-dimensional data are available. Black-Right-Pointing-Pointer Data with PHP API can be applied: MDSplus and SQL have been tested. Black-Right-Pointing-Pointer Modular in design, this has been deployed to support both the experimental and the simulation research arenas. - Abstract: With the continuing development of web technologies, it is becoming feasible for websites to operate a lot like a scientific desktop application. This has opened up more possibilities for utilizing the web browser for interactive scientific research and providing new means of on-line communication and collaboration. This paper describes the research and deployment for utilizing these enhanced web graphics capabilities on the fusion research tools which has led to a general toolkit that can be deployed as required. It allows users to dynamically create, interact with and share with others, the large sets of data generated by the fusion experiments and simulations. Hypertext Preprocessor (PHP), a general-purpose scripting language for the Web, is used to process a series of inputs, and determine the data source types and locations to fetch and organize the data. Protovis, a Javascript and SVG based web graphics package, then quickly draws the interactive graphs and makes it available to the worldwide audience. This toolkit has been deployed to both the simulation and experimental arenas. The deployed applications will be presented as well as the architecture and technologies used in producing the general graphics toolkit.

  7. Web-based (HTML5) interactive graphics for fusion research and collaboration

    International Nuclear Information System (INIS)

    Kim, E.N.; Schissel, D.P.; Abla, G.; Flanagan, S.; Lee, X.

    2012-01-01

    Highlights: ► Interactive data visualization is supported via the Web without a browser plugin and provides users easy, real-time access to data of different types from various locations. ► Crosshair, zoom, pan as well as toggling dimensionality and a slice bar for multi-dimensional data are available. ► Data with PHP API can be applied: MDSplus and SQL have been tested. ► Modular in design, this has been deployed to support both the experimental and the simulation research arenas. - Abstract: With the continuing development of web technologies, it is becoming feasible for websites to operate a lot like a scientific desktop application. This has opened up more possibilities for utilizing the web browser for interactive scientific research and providing new means of on-line communication and collaboration. This paper describes the research and deployment for utilizing these enhanced web graphics capabilities on the fusion research tools which has led to a general toolkit that can be deployed as required. It allows users to dynamically create, interact with and share with others, the large sets of data generated by the fusion experiments and simulations. Hypertext Preprocessor (PHP), a general-purpose scripting language for the Web, is used to process a series of inputs, and determine the data source types and locations to fetch and organize the data. Protovis, a Javascript and SVG based web graphics package, then quickly draws the interactive graphs and makes it available to the worldwide audience. This toolkit has been deployed to both the simulation and experimental arenas. The deployed applications will be presented as well as the architecture and technologies used in producing the general graphics toolkit.

  8. Plots, Calculations and Graphics Tools (PCG2). Software Transfer Request Presentation

    Science.gov (United States)

    Richardson, Marilou R.

    2010-01-01

    This slide presentation reviews the development of the Plots, Calculations and Graphics Tools (PCG2) system. PCG2 is an easy to use tool that provides a single user interface to view data in a pictorial, tabular or graphical format. It allows the user to view the same display and data in the Control Room, engineering office area, or remote sites. PCG2 supports extensive and regular engineering needs that are both planned and unplanned and it supports the ability to compare, contrast and perform ad hoc data mining over the entire domain of a program's test data.

  9. Mvox: Interactive 2-4D medical image and graphics visualization software

    DEFF Research Database (Denmark)

    Bro-Nielsen, Morten

    1996-01-01

    Mvox is a new tool for visualization, segmentation and manipulation of a wide range of 2-4D grey level and colour images, and 3D surface graphics, which has been developed at the Department of Mathematical Modelling, Technical University of Denmark. The principal idea behind the software has been...... to provide a flexible tool that is able to handle all the kinds of data that are typically used in a research environment for medical imaging and visualization. At the same time the software should be easy to use and have a consistent interface providing locally only the functions relevant to the context....... This has been achieved by using Unix standards such as X/Motif/OpenGL and conforming to modern standards of interactive windowed programs...

  10. Development of a graphical animation interactive feature to assess MAAP-CANDU simulation results

    International Nuclear Information System (INIS)

    Petoukhov, S.M.; Karancevic, N.; Morreale, A.C.; Paik, C.Y.; Brown, M.J.; Cole, C.

    2015-01-01

    MAAP-CANDU is an integrated severe accident analysis code for CANDU plant simulations that necessitates the assessment and post-processing of extensive amounts of information obtained from code run results. The MAAP-CANDU GRaphical Animation Package Extension (GRAPE) is a flexible, efficient, interactive and integrated visualization tool for analyzing plant behaviour during postulated accidents including accident management actions for single and multi-unit CANDU plants. GRAPE was developed by FAI in consultation with CNL (AECL) and CNSC from the FAI MAAP-GRAAPH code used in MAAP (LWR version). CNSC plans to use MAAP-CANDU and GRAPE as one of the tools in their Emergency Operations Centre.(author)

  11. Development of a graphical animation interactive feature to assess MAAP-CANDU simulation results

    Energy Technology Data Exchange (ETDEWEB)

    Petoukhov, S.M., E-mail: sergei.petoukhov@cnl.ca [Canadian Nuclear Laboratories, Chalk River, ON (Canada); Karancevic, N., E-mail: karancevic@fauske.com [Fauske and Associates Inc. (FAI), Burr Ridge, IL (United States); Morreale, A.C., E-mail: andrew.morreale@cnl.ca [Canadian Nuclear Laboratories, Chalk River, ON (Canada); Paik, C.Y., E-mail: paik@fauske.com [Fauske and Associates Inc., Burr Ridge, IL (United States); Brown, M.J., E-mail: morgan.brown@cnl.ca [Canadian Nuclear Laboratories, Chalk River, ON (Canada); Cole, C., E-mail: christopher.cole@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

    2015-07-01

    MAAP-CANDU is an integrated severe accident analysis code for CANDU plant simulations that necessitates the assessment and post-processing of extensive amounts of information obtained from code run results. The MAAP-CANDU GRaphical Animation Package Extension (GRAPE) is a flexible, efficient, interactive and integrated visualization tool for analyzing plant behaviour during postulated accidents including accident management actions for single and multi-unit CANDU plants. GRAPE was developed by FAI in consultation with CNL (AECL) and CNSC from the FAI MAAP-GRAAPH code used in MAAP (LWR version). CNSC plans to use MAAP-CANDU and GRAPE as one of the tools in their Emergency Operations Centre.(author)

  12. 2D-dynamic representation of DNA sequences as a graphical tool in bioinformatics

    Science.gov (United States)

    Bielińska-Wa̧Ż, D.; Wa̧Ż, P.

    2016-10-01

    2D-dynamic representation of DNA sequences is briefly reviewed. Some new examples of 2D-dynamic graphs which are the graphical tool of the method are shown. Using the examples of the complete genome sequences of the Zika virus it is shown that the present method can be applied for the study of the evolution of viral genomes.

  13. PC Software graphics tool for conceptual design of space/planetary electrical power systems

    Science.gov (United States)

    Truong, Long V.

    1995-01-01

    This paper describes the Decision Support System (DSS), a personal computer software graphics tool for designing conceptual space and/or planetary electrical power systems. By using the DSS, users can obtain desirable system design and operating parameters, such as system weight, electrical distribution efficiency, and bus power. With this tool, a large-scale specific power system was designed in a matter of days. It is an excellent tool to help designers make tradeoffs between system components, hardware architectures, and operation parameters in the early stages of the design cycle. The DSS is a user-friendly, menu-driven tool with online help and a custom graphical user interface. An example design and results are illustrated for a typical space power system with multiple types of power sources, frequencies, energy storage systems, and loads.

  14. Design and validation of an improved graphical user interface with the 'Tool ball'.

    Science.gov (United States)

    Lee, Kuo-Wei; Lee, Ying-Chu

    2012-01-01

    The purpose of this research is introduce the design of an improved graphical user interface (GUI) and verifies the operational efficiency of the proposed interface. Until now, clicking the toolbar with the mouse is the usual way to operate software functions. In our research, we designed an improved graphical user interface - a tool ball that is operated by a mouse wheel to perform software functions. Several experiments are conducted to measure the time needed to operate certain software functions with the traditional combination of "mouse click + tool button" and the proposed integration of "mouse wheel + tool ball". The results indicate that the tool ball design can accelerate the speed of operating software functions, decrease the number of icons on the screen, and enlarge the applications of the mouse wheel. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  15. LCFM - LIVING COLOR FRAME MAKER: PC GRAPHICS GENERATION AND MANAGEMENT TOOL FOR REAL-TIME APPLICATIONS

    Science.gov (United States)

    Truong, L. V.

    1994-01-01

    Computer graphics are often applied for better understanding and interpretation of data under observation. These graphics become more complicated when animation is required during "run-time", as found in many typical modern artificial intelligence and expert systems. Living Color Frame Maker is a solution to many of these real-time graphics problems. Living Color Frame Maker (LCFM) is a graphics generation and management tool for IBM or IBM compatible personal computers. To eliminate graphics programming, the graphic designer can use LCFM to generate computer graphics frames. The graphical frames are then saved as text files, in a readable and disclosed format, which can be easily accessed and manipulated by user programs for a wide range of "real-time" visual information applications. For example, LCFM can be implemented in a frame-based expert system for visual aids in management of systems. For monitoring, diagnosis, and/or controlling purposes, circuit or systems diagrams can be brought to "life" by using designated video colors and intensities to symbolize the status of hardware components (via real-time feedback from sensors). Thus status of the system itself can be displayed. The Living Color Frame Maker is user friendly with graphical interfaces, and provides on-line help instructions. All options are executed using mouse commands and are displayed on a single menu for fast and easy operation. LCFM is written in C++ using the Borland C++ 2.0 compiler for IBM PC series computers and compatible computers running MS-DOS. The program requires a mouse and an EGA/VGA display. A minimum of 77K of RAM is also required for execution. The documentation is provided in electronic form on the distribution medium in WordPerfect format. A sample MS-DOS executable is provided on the distribution medium. The standard distribution medium for this program is one 5.25 inch 360K MS-DOS format diskette. The contents of the diskette are compressed using the PKWARE archiving tools

  16. Interactive computer graphics and its role in control system design of large space structures

    Science.gov (United States)

    Reddy, A. S. S. R.

    1985-01-01

    This paper attempts to show the relevance of interactive computer graphics in the design of control systems to maintain attitude and shape of large space structures to accomplish the required mission objectives. The typical phases of control system design, starting from the physical model such as modeling the dynamics, modal analysis, and control system design methodology are reviewed and the need of the interactive computer graphics is demonstrated. Typical constituent parts of large space structures such as free-free beams and free-free plates are used to demonstrate the complexity of the control system design and the effectiveness of the interactive computer graphics.

  17. The IGUANA interactive graphics toolkit with examples from CMS and D0

    International Nuclear Information System (INIS)

    Alverson, G.; Osborne, I.; Taylor, L.; Tuura, L.

    2001-01-01

    IGUANA (Interactive Graphics for User ANAlysis) is a C++ toolkit for developing graphical user interfaces and high performance 2-D and 3-D graphics applications, such as data browsers and detector and event visualisation programs. The IGUANA strategy is to use freely available software (e.g. Qt, SoQt, OpenInventor, OpenGL, HEPVis) and package and extend it to provide a general-purpose and experiment-independent toolkit. The authors describe the evaluation and choices of publicly available GUI/graphics software and the additional functionality currently provided by IGUANA. The authors demonstrate the use of IGUANA with several applications built for CMS and D0

  18. Anvil Forecast Tool in the Advanced Weather Interactive Processing System

    Science.gov (United States)

    Barrett, Joe H., III; Hood, Doris

    2009-01-01

    Meteorologists from the 45th Weather Squadron (45 WS) and National Weather Service Spaceflight Meteorology Group (SMG) have identified anvil forecasting as one of their most challenging tasks when predicting the probability of violations of the Lightning Launch Commit Criteria and Space Shuttle Flight Rules. As a result, the Applied Meteorology Unit (AMU) was tasked to create a graphical overlay tool for the Meteorological Interactive Data Display System (MIDDS) that indicates the threat of thunderstorm anvil clouds, using either observed or model forecast winds as input. The tool creates a graphic depicting the potential location of thunderstorm anvils one, two, and three hours into the future. The locations are based on the average of the upper level observed or forecasted winds. The graphic includes 10 and 20 n mi standoff circles centered at the location of interest, as well as one-, two-, and three-hour arcs in the upwind direction. The arcs extend outward across a 30 sector width based on a previous AMU study that determined thunderstorm anvils move in a direction plus or minus 15 of the upper-level wind direction. The AMU was then tasked to transition the tool to the Advanced Weather Interactive Processing System (AWIPS). SMG later requested the tool be updated to provide more flexibility and quicker access to model data. This presentation describes the work performed by the AMU to transition the tool into AWIPS, as well as the subsequent improvements made to the tool.

  19. Which energy mix for the UK (United Kingdom)? An evolutive descriptive mapping with the integrated GAIA (graphical analysis for interactive aid)–AHP (analytic hierarchy process) visualization tool

    International Nuclear Information System (INIS)

    Ishizaka, Alessio; Siraj, Sajid; Nemery, Philippe

    2016-01-01

    Although Multi-Criteria Decision Making methods have been extensively used in energy planning, their descriptive use has been rarely considered. In this paper, we add an evolutionary description phase as an extension to the AHP (analytic hierarchy process) method that helps policy makers to gain insights into their decision problems. The proposed extension has been implemented in an open-source software that allows the users to visualize the difference of opinions within a decision process, and also the evolution of preferences over time. The method was tested in a two-phase experiment to understand the evolution of opinions on energy sources. Participants were asked to provide their preferences for different energy sources for the next twenty years for the United Kingdom. They were first asked to compare the options intuitively without using any structured approach, and then were given three months to compare the same set of options after collecting detailed information on the technical, economic, environmental and social impacts created by each of the selected energy sources. The proposed visualization method allow us to quickly discover the preference directions, and also the changes in their preferences from first to second phase. The proposed tool can help policy makers in better understanding of the energy planning problems that will lead us towards better planning and decisions in the energy sector. - Highlights: • We introduce a descriptive visual analysis tool for the analytic hierarchy process. • The method has been implemented as an open-source preference elicitation tool. • We analyse user preferences in the energy sector using this method. • The tool also provides a way to visualize temporal preferences changes. • The main negative temporal shift in the ranking was found for the nuclear energy.

  20. Interactive Gaussian Graphical Models for Discovering Depth Trends in ChemCam Data

    Science.gov (United States)

    Oyen, D. A.; Komurlu, C.; Lanza, N. L.

    2018-04-01

    Interactive Gaussian graphical models discover surface compositional features on rocks in ChemCam targets. Our approach visualizes shot-to-shot relationships among LIBS observations, and identifies the wavelengths involved in the trend.

  1. CDP a graphic system for the interactive simulation and the dynamic analysis of continuous systems

    International Nuclear Information System (INIS)

    Ricci, A.; Teolis, A.

    1973-01-01

    An IBM 2250 graphic system for the interactive simulation of continuous sytems is illustrated. Time dependent quantities can be plotted or an animated, real or schematic, representation of the system being studied can be given

  2. An overview of interactive computer graphics and its application to computer-aided engineering and design

    International Nuclear Information System (INIS)

    Van Dam, A.

    1983-01-01

    The purpose of this brief birds-eye view of interactive graphics is to list the key ideas, and to show how one of the most important application areas, Computer Aided Engineering/Design takes advantage of it. (orig.)

  3. Practical training in the operation of nuclear power plants with Interactive Graphic Simulator of Zorita

    International Nuclear Information System (INIS)

    Cuervo, D.; Garcia-Herranz, N.; Garcia, S.; Davila, R.; Ahnert, C.; Aragones, J. M.; Cabellos, O.; Gallego, E.; Lorente, A.; Minguez, E.; Rebollo, L.; Blanco, J.

    2010-01-01

    In April 2008 a collaboration agreement was signed between Gas Natural Union Fenosa and the Universad Politecnica de Madrid for the creation of the Aula Jose Cabrera dedicated to train professionals in the field of nuclear technology. The Classroom located in the Department of Nuclear Engineering, has been equipped with the Interactive Graphic Simulator of Zorita (SGIZ). The use of the simulator intended to improve the quality of teaching in the area of Nuclear Engineering. It integrates in the teachings of Industrial Engineering degree and the Master of Nuclear Science and Technology. Different manuals are under preparation to make it a suitable tool for teaching purpose. These manuals will guide the student so that learning takes place both through the guidance of the teacher as independently. (Author) 3 refs.

  4. SeqVISTA: a graphical tool for sequence feature visualization and comparison

    Directory of Open Access Journals (Sweden)

    Niu Tianhua

    2003-01-01

    Full Text Available Abstract Background Many readers will sympathize with the following story. You are viewing a gene sequence in Entrez, and you want to find whether it contains a particular sequence motif. You reach for the browser's "find in page" button, but those darn spaces every 10 bp get in the way. And what if the motif is on the opposite strand? Subsequently, your favorite sequence analysis software informs you that there is an interesting feature at position 13982–14013. By painstakingly counting the 10 bp blocks, you are able to examine the sequence at this location. But now you want to see what other features have been annotated close by, and this information is buried several screenfuls higher up the web page. Results SeqVISTA presents a holistic, graphical view of features annotated on nucleotide or protein sequences. This interactive tool highlights the residues in the sequence that correspond to features chosen by the user, and allows easy searching for sequence motifs or extraction of particular subsequences. SeqVISTA is able to display results from diverse sequence analysis tools in an integrated fashion, and aims to provide much-needed unity to the bioinformatics resources scattered around the Internet. Our viewer may be launched on a GenBank record by a single click of a button installed in the web browser. Conclusion SeqVISTA allows insights to be gained by viewing the totality of sequence annotations and predictions, which may be more revealing than the sum of their parts. SeqVISTA runs on any operating system with a Java 1.4 virtual machine. It is freely available to academic users at http://zlab.bu.edu/SeqVISTA.

  5. An application of interactive computer graphics technology to the design of dispersal mechanisms

    Science.gov (United States)

    Richter, B. J.; Welch, B. H.

    1977-01-01

    Interactive computer graphics technology is combined with a general purpose mechanisms computer code to study the operational behavior of three guided bomb dispersal mechanism designs. These studies illustrate the use of computer graphics techniques to discover operational anomalies, to assess the effectiveness of design improvements, to reduce the time and cost of the modeling effort, and to provide the mechanism designer with a visual understanding of the physical operation of such systems.

  6. Expanding the Interaction Lexicon for 3D Graphics

    National Research Council Canada - National Science Library

    Pierce, Jeffrey S

    2001-01-01

    .... This research makes several contributions to 3D interaction and virtual reality. The Voodoo Dolls technique is a new technique for manipulating objects in immersive 3D environments in which users manipulate hand-held copies of objects...

  7. Graphical Environment Tools for Application to Gamma-Ray Energy Tracking Arrays

    Energy Technology Data Exchange (ETDEWEB)

    Todd, Richard A. [RIS Corp.; Radford, David C. [ORNL Physics Div.

    2013-12-30

    Highly segmented, position-sensitive germanium detector systems are being developed for nuclear physics research where traditional electronic signal processing with mixed analog and digital function blocks would be enormously complex and costly. Future systems will be constructed using pipelined processing of high-speed digitized signals as is done in the telecommunications industry. Techniques which provide rapid algorithm and system development for future systems are desirable. This project has used digital signal processing concepts and existing graphical system design tools to develop a set of re-usable modular functions and libraries targeted for the nuclear physics community. Researchers working with complex nuclear detector arrays such as the Gamma-Ray Energy Tracking Array (GRETA) have been able to construct advanced data processing algorithms for implementation in field programmable gate arrays (FPGAs) through application of these library functions using intuitive graphical interfaces.

  8. Supporting geoscience with graphical-user-interface Internet tools for the Macintosh

    Science.gov (United States)

    Robin, Bernard

    1995-07-01

    This paper describes a suite of Macintosh graphical-user-interface (GUI) software programs that can be used in conjunction with the Internet to support geoscience education. These software programs allow science educators to access and retrieve a large body of resources from an increasing number of network sites, taking advantage of the intuitive, simple-to-use Macintosh operating system. With these tools, educators easily can locate, download, and exchange not only text files but also sound resources, video movie clips, and software application files from their desktop computers. Another major advantage of these software tools is that they are available at no cost and may be distributed freely. The following GUI software tools are described including examples of how they can be used in an educational setting: ∗ Eudora—an e-mail program ∗ NewsWatcher—a newsreader ∗ TurboGopher—a Gopher program ∗ Fetch—a software application for easy File Transfer Protocol (FTP) ∗ NCSA Mosaic—a worldwide hypertext browsing program. An explosive growth of online archives currently is underway as new electronic sites are being added continuously to the Internet. Many of these resources may be of interest to science educators who learn they can share not only ASCII text files, but also graphic image files, sound resources, QuickTime movie clips, and hypermedia projects with colleagues from locations around the world. These powerful, yet simple to learn GUI software tools are providing a revolution in how knowledge can be accessed, retrieved, and shared.

  9. Virtual reality in medicine-computer graphics and interaction techniques.

    Science.gov (United States)

    Haubner, M; Krapichler, C; Lösch, A; Englmeier, K H; van Eimeren, W

    1997-03-01

    This paper describes several new visualization and interaction techniques that enable the use of virtual environments for routine medical purposes. A new volume-rendering method supports shaded and transparent visualization of medical image sequences in real-time with an interactive threshold definition. Based on these rendering algorithms two complementary segmentation approaches offer an intuitive assistance for a wide range of requirements in diagnosis and therapy planning. In addition, a hierarchical data representation for geometric surface descriptions guarantees an optimal use of available hardware resources and prevents inaccurate visualization. The combination of the presented techniques empowers the improved human-machine interface of virtual reality to support every interactive task in medical three-dimensional (3-D) image processing, from visualization of unsegmented data volumes up to the simulation of surgical procedures.

  10. Interactive graphics for the CMS experiment at the LHC

    International Nuclear Information System (INIS)

    Taylor, L.

    1996-01-01

    The ability to visualize the CMS detector and its response to physics is of great importance, both in the design evaluation and data analysis phases of the experiment. We describe the visualisation requirements of CMS and the implementation of the CMS interactive detector and event visualisation program, known as CMSCAN, which supports 3D viewing of the detector and events, as well as abstracted images, such as lego plots. It provides a high level of user interactivity, such as rotation, translation magnification, and visibility of the image, and communicates with the reconstruction program to allow the user to control the data processing and analysis. (author)

  11. X based interactive computer graphics applications for aerodynamic design and education

    Science.gov (United States)

    Benson, Thomas J.; Higgs, C. Fred, III

    1995-01-01

    Six computer applications packages have been developed to solve a variety of aerodynamic problems in an interactive environment on a single workstation. The packages perform classical one dimensional analysis under the control of a graphical user interface and can be used for preliminary design or educational purposes. The programs were originally developed on a Silicon Graphics workstation and used the GL version of the FORMS library as the graphical user interface. These programs have recently been converted to the XFORMS library of X based graphics widgets and have been tested on SGI, IBM, Sun, HP and PC-Lunix computers. The paper will show results from the new VU-DUCT program as a prime example. VU-DUCT has been developed as an educational package for the study of subsonic open and closed loop wind tunnels.

  12. Computer graphics and research projects

    International Nuclear Information System (INIS)

    Ingtrakul, P.

    1994-01-01

    This report was prepared as an account of scientific visualization tools and application tools for scientists and engineers. It is provided a set of tools to create pictures and to interact with them in natural ways. It applied many techniques of computer graphics and computer animation through a number of full-color presentations as computer animated commercials, 3D computer graphics, dynamic and environmental simulations, scientific modeling and visualization, physically based modelling, and beavioral, skelatal, dynamics, and particle animation. It took in depth at original hardware and limitations of existing PC graphics adapters contain syste m performance, especially with graphics intensive application programs and user interfaces

  13. GAIML: A New Language for Verbal and Graphical Interaction in Chatbots

    Directory of Open Access Journals (Sweden)

    Roberto Pirrone

    2008-01-01

    Full Text Available Natural and intuitive interaction between users and complex systems is a crucial research topic in human-computer interaction. A major direction is the definition and implementation of systems with natural language understanding capabilities. The interaction in natural language is often performed by means of systems called chatbots. A chatbot is a conversational agent with a proper knowledge base able to interact with users. Chatbots appearance can be very sophisticated with 3D avatars and speech processing modules. However the interaction between the system and the user is only performed through textual areas for inputs and replies. An interaction able to add to natural language also graphical widgets could be more effective. On the other side, a graphical interaction involving also the natural language can increase the comfort of the user instead of using only graphical widgets. In many applications multi-modal communication must be preferred when the user and the system have a tight and complex interaction. Typical examples are cultural heritages applications (intelligent museum guides, picture browsing or systems providing the user with integrated information taken from different and heterogenous sources as in the case of the iGoogle™ interface. We propose to mix the two modalities (verbal and graphical to build systems with a reconfigurable interface, which is able to change with respect to the particular application context. The result of this proposal is the Graphical Artificial Intelligence Markup Language (GAIML an extension of AIML allowing merging both interaction modalities. In this context a suitable chatbot system called Graphbot is presented to support this language. With this language is possible to define personalized interface patterns that are the most suitable ones in relation to the data types exchanged between the user and the system according to the context of the dialogue.

  14. DockingShop: A Tool for Interactive Molecular Docking

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Ting-Cheng; Max, Nelson L.; Ding, Jinhui; Bethel, E. Wes; Crivelli, Silvia N.

    2005-04-24

    Given two independently determined molecular structures, the molecular docking problem predicts the bound association, or best fit between them, while allowing for conformational changes of the individual molecules during construction of a molecular complex. Docking Shop is an integrated environment that permits interactive molecular docking by navigating a ligand or protein to an estimated binding site of a receptor with real-time graphical feedback of scoring factors as visual guides. Our program can be used to create initial configurations for a protein docking prediction process. Its output--the structure of aprotein-ligand or protein-protein complex--may serve as an input for aprotein docking algorithm, or an optimization process. This tool provides molecular graphics interfaces for structure modeling, interactive manipulation, navigation, optimization, and dynamic visualization to aid users steer the prediction process using their biological knowledge.

  15. Transportable Applications Environment (TAE) Plus: A NASA tool for building and managing graphical user interfaces

    Science.gov (United States)

    Szczur, Martha R.

    1993-01-01

    The Transportable Applications Environment (TAE) Plus, developed at NASA's Goddard Space Flight Center, is an advanced portable user interface development which simplifies the process of creating and managing complex application graphical user interfaces (GUI's). TAE Plus supports the rapid prototyping of GUI's and allows applications to be ported easily between different platforms. This paper will discuss the capabilities of the TAE Plus tool, and how it makes the job of designing and developing GUI's easier for application developers. TAE Plus is being applied to many types of applications, and this paper discusses how it has been used both within and outside NASA.

  16. The Planning of Straight Line Trajectory in Robotics Using Interactive Graphics

    Directory of Open Access Journals (Sweden)

    Kesheng Wang

    1987-07-01

    Full Text Available The planning of straight line trajectory using the interactive computer graphics simulation of robot manipulator movement is discussed. This new approach to straight line motion planning improves the 'bound deviation joint paths' developed by R. M. Taylor (1979. The new approach has three characteristics: (1 linear interpolation in joint space; (2 unequal intervals for interpolating knot points; (3 using interactive computer graphics to assure that the maximum deviation in the whole segment is less than the pre-specified values. The structure and mathematical basis of a computer program developed for this purpose are presented.

  17. Prediction of surgical view of neurovascular decompression using interactive computer graphics.

    Science.gov (United States)

    Kin, Taichi; Oyama, Hiroshi; Kamada, Kyousuke; Aoki, Shigeki; Ohtomo, Kuni; Saito, Nobuhito

    2009-07-01

    To assess the value of an interactive visualization method for detecting the offending vessels in neurovascular compression syndrome in patients with facial spasm and trigeminal neuralgia. Computer graphics models are created by fusion of fast imaging employing steady-state acquisition and magnetic resonance angiography. High-resolution magnetic resonance angiography and fast imaging employing steady-state acquisition were performed preoperatively in 17 patients with neurovascular compression syndromes (facial spasm, n = 10; trigeminal neuralgia, n = 7) using a 3.0-T magnetic resonance imaging scanner. Computer graphics models were created with computer software and observed interactively for detection of offending vessels by rotation, enlargement, reduction, and retraction on a graphic workstation. Two-dimensional images were reviewed by 2 radiologists blinded to the clinical details, and 2 neurosurgeons predicted the offending vessel with the interactive visualization method before surgery. Predictions from the 2 imaging approaches were compared with surgical findings. The vessels identified during surgery were assumed to be the true offending vessels. Offending vessels were identified correctly in 16 of 17 patients (94%) using the interactive visualization method and in 10 of 17 patients using 2-dimensional images. These data demonstrated a significant difference (P = 0.015 by Fisher's exact method). The interactive visualization method data corresponded well with surgical findings (surgical field, offending vessels, and nerves). Virtual reality 3-dimensional computer graphics using fusion magnetic resonance angiography and fast imaging employing steady-state acquisition may be helpful for preoperative simulation.

  18. Interactive virtual simulation using a 3D computer graphics model for microvascular decompression surgery.

    Science.gov (United States)

    Oishi, Makoto; Fukuda, Masafumi; Hiraishi, Tetsuya; Yajima, Naoki; Sato, Yosuke; Fujii, Yukihiko

    2012-09-01

    The purpose of this paper is to report on the authors' advanced presurgical interactive virtual simulation technique using a 3D computer graphics model for microvascular decompression (MVD) surgery. The authors performed interactive virtual simulation prior to surgery in 26 patients with trigeminal neuralgia or hemifacial spasm. The 3D computer graphics models for interactive virtual simulation were composed of the brainstem, cerebellum, cranial nerves, vessels, and skull individually created by the image analysis, including segmentation, surface rendering, and data fusion for data collected by 3-T MRI and 64-row multidetector CT systems. Interactive virtual simulation was performed by employing novel computer-aided design software with manipulation of a haptic device to imitate the surgical procedures of bone drilling and retraction of the cerebellum. The findings were compared with intraoperative findings. In all patients, interactive virtual simulation provided detailed and realistic surgical perspectives, of sufficient quality, representing the lateral suboccipital route. The causes of trigeminal neuralgia or hemifacial spasm determined by observing 3D computer graphics models were concordant with those identified intraoperatively in 25 (96%) of 26 patients, which was a significantly higher rate than the 73% concordance rate (concordance in 19 of 26 patients) obtained by review of 2D images only (p computer graphics model provided a realistic environment for performing virtual simulations prior to MVD surgery and enabled us to ascertain complex microsurgical anatomy.

  19. Cyrus Levinthal, the Kluge and the origins of interactive molecular graphics.

    Science.gov (United States)

    Francoeur, Eric

    2002-12-01

    In the mid-1960s, a group of scientists at Massachusetts Institute of Technology, led by Cyrus Levinthal, took hold of one of the early interactive graphics terminals and used it to visualize, study and model the structure of proteins and nucleic acids. From this encounter between cutting-edge computer technology and molecular biology emerged the crucial elements for the development of a research-technology field known today as interactive molecular graphics. The following account is not only about how computer graphics technology has literally changed the way scientists view the molecular realm, but also a look at how an epistemic and institutional space was created to integrate this technology into scientific research.

  20. Receiver Operator Characteristic Tools Graphic User Interface Extension for R Commander

    Directory of Open Access Journals (Sweden)

    Daniel Corneliu LEUCUŢA

    2015-12-01

    Full Text Available Background: Receiver Operator Characteristic (ROC curve, is a graphical plot which presents the performance of a binary classifier when the discrimination cutoff is varied. The aim of this work was to create an extension for R Commander that offers a graphical user interface for Receiver Operator Characteristic tools provided by several existing command line accessible packages like pROC and ROCR. Material and Methods: The extension was built and tested with R version 3.2.0 and R Commander 2.1-7. Results: We built an extension called RcmdrPlugin.ROC that we uploaded on the CRAN servers. The extension adds a new menu called ROC, along with two submenus pROC and ROCR that broadly corresponds to commands available to access the functions of these packages. The pROC menu offers several commands: to plot a ROC curve for a dataset or for a logistic regression model, to compare paired and unpaired ROC curves, each providing the following tabs: General (to select the variables for the analysis, and options for switching cases with controls; Smoothing (allowing the user to select different types of smoothing – binominal, density, distributions like normal, lognormal, ...; AUC (to specify the partial area under the curve (AUC options, CI (to select the options of confidence intervals (CI – the level, computing method: DeLong, bootstrap, ...; Plot (for the plotting options. The ROCR dialogue window offers more options in choosing the performance measures for the plot. Conclusion: The RcmdrPlugin.ROC extension helps less advanced users of R accessing ROC tools in a friendly graphical user interface.

  1. Transportable Applications Environment (TAE) Plus - A NASA productivity tool used to develop graphical user interfaces

    Science.gov (United States)

    Szczur, Martha R.

    1991-01-01

    The Transportable Applications Environment (TAE) Plus, developed at NASA's Goddard Space Flight Center, is an advanced portable user interface development environment which simplifies the process of creating and managing complex application graphical user interfaces (GUIs), supports prototyping, allows applications to be oported easily between different platforms, and encourages appropriate levels of user interface consistency between applications. This paper discusses the capabilities of the TAE Plus tool, and how it makes the job of designing and developing GUIs easier for the application developers. The paper also explains how tools like TAE Plus provide for reusability and ensure reliability of UI software components, as well as how they aid in the reduction of development and maintenance costs.

  2. HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 3: HARP Graphics Oriented (GO) input user's guide

    Science.gov (United States)

    Bavuso, Salvatore J.; Rothmann, Elizabeth; Mittal, Nitin; Koppen, Sandra Howell

    1994-01-01

    The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems, and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical preprocessor Graphics Oriented (GO) program. GO is a graphical user interface for the HARP engine that enables the drawing of reliability/availability models on a monitor. A mouse is used to select fault tree gates or Markov graphical symbols from a menu for drawing.

  3. WinGraphics: An optimized windowing environment for interactive real-time simulations

    International Nuclear Information System (INIS)

    Verboncoeur, J.P.; Vahedi, V.

    1989-01-01

    We have developed a customized windowing environment, Win Graphics, which provides particle simulation codes with an interactive user interface. The environment supports real-time animation of the simulation, displaying multiple diagnostics as they evolve in time. In addition, keyboard and printer (PostScript and dot matrix) support is provided. This paper describes this environment

  4. Towards a responsive and interactive graphical user interface for neutron data reduction and visualization

    International Nuclear Information System (INIS)

    Chatterjee, Alok; Worlton, T.; Hammonds, J.; Loong, C.K.; Mikkelson, D.; Mikkelson, R.; Chen, D.

    2001-01-01

    An Integrated Spectral Analysis Workbench, ISAW has been developed at IPNS with the goal of providing a flexible and powerful tool to visualize and analyze neutron scattering time-of-flight data. The software, written in Java, is platform independent, object oriented and modular, making it easier to maintain and add features. The graphical user interface (GUI) for ISAW allows intuitive and interactive loading and manipulation of multiple spectra from different 'runs'. ISAW provides multiple displays of the spectra in a Runfile' and most of the functions can be performed through the GUI menu bar as well as through command scripts. All displays are simultaneously updated when the data is changed using the Observable-observer object-model pattern. All displays are observers of the Dataset (observable) and respond to changes or selections in it simultaneously. A 'tree' display of the spectra in run files is provided for a detailed view of detector elements and easy selection of spectra. The operations menu is instrument sensitive so that it displays the appropriate set of operators accordingly. Automatic menu generation is made possible by the ability of the DataSet objects to furnish a list of operations contained in the particular DataSet selected at the time the menu bar is accessed. The transformed and corrected data can be saved to a disk in different file formats for further analyses (e.g., GSAS for structure refinement). (author)

  5. DbAccess: Interactive Statistics and Graphics for Plasma Physics Databases

    International Nuclear Information System (INIS)

    Davis, W.; Mastrovito, D.

    2003-01-01

    DbAccess is an X-windows application, written in IDL(reg s ign), meeting many specialized statistical and graphical needs of NSTX [National Spherical Torus Experiment] plasma physicists, such as regression statistics and the analysis of variance. Flexible ''views'' and ''joins,'' which include options for complex SQL expressions, facilitate mixing data from different database tables. General Atomics Plot Objects add extensive graphical and interactive capabilities. An example is included for plasma confinement-time scaling analysis using a multiple linear regression least-squares power fit

  6. A sampler of useful computational tools for applied geometry, computer graphics, and image processing foundations for computer graphics, vision, and image processing

    CERN Document Server

    Cohen-Or, Daniel; Ju, Tao; Mitra, Niloy J; Shamir, Ariel; Sorkine-Hornung, Olga; Zhang, Hao (Richard)

    2015-01-01

    A Sampler of Useful Computational Tools for Applied Geometry, Computer Graphics, and Image Processing shows how to use a collection of mathematical techniques to solve important problems in applied mathematics and computer science areas. The book discusses fundamental tools in analytical geometry and linear algebra. It covers a wide range of topics, from matrix decomposition to curvature analysis and principal component analysis to dimensionality reduction.Written by a team of highly respected professors, the book can be used in a one-semester, intermediate-level course in computer science. It

  7. COREMAP: Graphical user interface for displaying reactor core data in an interactive hexagon map

    International Nuclear Information System (INIS)

    Muscat, F.L.; Derstine, K.L.

    1995-01-01

    COREMAP is a Graphical User Interface (GUI) designed to assist users read and check reactor core data from multidimensional neutronic simulation models in color and/or as text in an interactive 2D planar grid of hexagonal subassemblies. COREMAP is a complete GEODST/RUNDESC viewing tool which enables the user to access multi data set files (e.g. planes, moments, energy groups ,... ) and display up to two data sets simultaneously, one as color and the other as text. The user (1) controls color scale characteristics such as type (linear or logarithmic) and range limits, (2) controls the text display based upon conditional statements on data spelling, and value. (3) chooses zoom features such as core map size, number of rings and surrounding subassemblies, and (4) specifies the data selection for supplied popup subwindows which display a selection of data currently off-screen for a selected cell, as a list of data and/or as a graph. COREMAP includes a RUNDESC file editing tool which creates ''proposed'' Run-description files by point and click revisions to subassembly assignments in an existing EBRII Run-description file. COREMAP includes a fully automated printing option which creates high quality PostScript color or greyscale images of the core map independent of the monitor used, e.g. color prints can be generated with a session from a color or monochrome monitor. The automated PostScript output is an alternative to the xgrabsc based printing option. COREMAP includes a plotting option which creates graphs related to a selected cell. The user specifies the X and Y coordinates types (planes, moment, group, flux ,... ) and a parameter, P, when displaying several curves for the specified (X, Y) pair COREMAP supports hexagonal geometry reactor core configurations specified by: the GEODST file and binary Standard Interface Files and the RUNDESC ordering

  8. Interactive graphics for the Macintosh: software review of FlexiGraphs.

    Science.gov (United States)

    Antonak, R F

    1990-01-01

    While this product is clearly unique, its usefulness to individuals outside small business environments is somewhat limited. FlexiGraphs is, however, a reasonable first attempt to design a microcomputer software package that controls data through interactive editing within a graph. Although the graphics capabilities of mainframe programs such as MINITAB (Ryan, Joiner, & Ryan, 1981) and the graphic manipulations available through exploratory data analysis (e.g., Velleman & Hoaglin, 1981) will not be surpassed anytime soon by this program, a researcher may want to add this program to a software library containing other Macintosh statistics, drawing, and graphics programs if only to obtain the easy-to-obtain curve fitting and line smoothing options. I welcome the opportunity to review the enhanced "scientific" version of FlexiGraphs that the author of the program indicates is currently under development. An MS-DOS version of the program should be available within the year.

  9. Predicted Interval Plots (PIPS): A Graphical Tool for Data Monitoring of Clinical Trials.

    Science.gov (United States)

    Li, Lingling; Evans, Scott R; Uno, Hajime; Wei, L J

    2009-11-01

    Group sequential designs are often used in clinical trials to evaluate efficacy and/or futility. Many methods have been developed for different types of endpoints and scenarios. However, few of these methods convey information regarding effect sizes (e.g., treatment differences) and none uses prediction to convey information regarding potential effect size estimates and associated precision, with trial continuation. To address these limitations, Evans et al. (2007) proposed to use prediction and predicted intervals as a flexible and practical tool for quantitative monitoring of clinical trials. In this article, we reaffirm the importance and usefulness of this innovative approach and introduce a graphical summary, predicted interval plots (PIPS), to display the information obtained in the prediction process in a straightforward yet comprehensive manner. We outline the construction of PIPS and apply this method in two examples. The results and the interpretations of the PIPS are discussed.

  10. Sculpting proteins interactively: continual energy minimization embedded in a graphical modeling system.

    Science.gov (United States)

    Surles, M C; Richardson, J S; Richardson, D C; Brooks, F P

    1994-02-01

    We describe a new paradigm for modeling proteins in interactive computer graphics systems--continual maintenance of a physically valid representation, combined with direct user control and visualization. This is achieved by a fast algorithm for energy minimization, capable of real-time performance on all atoms of a small protein, plus graphically specified user tugs. The modeling system, called Sculpt, rigidly constrains bond lengths, bond angles, and planar groups (similar to existing interactive modeling programs), while it applies elastic restraints to minimize the potential energy due to torsions, hydrogen bonds, and van der Waals and electrostatic interactions (similar to existing batch minimization programs), and user-specified springs. The graphical interface can show bad and/or favorable contacts, and individual energy terms can be turned on or off to determine their effects and interactions. Sculpt finds a local minimum of the total energy that satisfies all the constraints using an augmented Lagrange-multiplier method; calculation time increases only linearly with the number of atoms because the matrix of constraint gradients is sparse and banded. On a 100-MHz MIPS R4000 processor (Silicon Graphics Indigo), Sculpt achieves 11 updates per second on a 20-residue fragment and 2 updates per second on an 80-residue protein, using all atoms except non-H-bonding hydrogens, and without electrostatic interactions. Applications of Sculpt are described: to reverse the direction of bundle packing in a designed 4-helix bundle protein, to fold up a 2-stranded beta-ribbon into an approximate beta-barrel, and to design the sequence and conformation of a 30-residue peptide that mimics one partner of a protein subunit interaction. Computer models that are both interactive and physically realistic (within the limitations of a given force field) have 2 significant advantages: (1) they make feasible the modeling of very large changes (such as needed for de novo design), and

  11. QR Code: An Interactive Mobile Advertising Tool

    OpenAIRE

    Ela Sibel Bayrak Meydanoglu

    2013-01-01

    Easy and rapid interaction between consumers and marketers enabled by mobile technology prompted  an increase in the usage of mobile media as an interactive marketing tool in recent years. One of the mobile technologies that can be used in interactive marketing for advertising is QR code (Quick Response Code). Interactive advertising brings back some advantages for the companies that apply it. For example, interaction with consumers provides significant information about consumers' preference...

  12. Hybrid Design Tools Intuit Interaction

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kyvsgaard Hansen, P.; Rasmussen, J.; Jorgensen, K.A.; Tollestrup, C.

    2012-01-01

    Non-linear, non-explicit, non-standard thinking and ambiguity in design tools has a great impact on enhancement of creativity during ideation and conceptualization. Tacit-tangible representation based on a mere idiosyncratic and individual approach combined with computational assistance allows the

  13. Explanation components as interactive tools

    Energy Technology Data Exchange (ETDEWEB)

    Wahlster, W.

    1983-01-01

    The ability to explain itself is probably the most important criterion of the user-friendliness of interactive systems. Explanation aids in the form of simple help functions do not meet this criterion. The reasons for this are outlined. More promising is an explanation component which can give the user intelligible and context-oriented explanations. The essential requirement for this is the development of knowledge-based interactive systems using artificial intelligence methods and techniques. The authors report on experiences with the development of explanation components, in particular a number of examples from the HAM-ANS project. 12 references.

  14. Using interactive graphical and technological strategies for EFL reading comprehension: A case study involving engineering students

    Directory of Open Access Journals (Sweden)

    Julia Valeska Barraza

    2014-09-01

    Full Text Available This qualitative study engaged a group of engineering students in the use of interactive graphical and technological strategies called IGOs (interactive, graphic organisers software in order to improve their level of EFL reading comprehension. The learners were asked to use three different types of IGOs, causes and effects, a sequence of events and pros and cons. Data was gathered through an opinion’s survey with the intention of collecting and evaluating the students’ perceptions on the use of the IGOs software. Findings revealed that most of the learners answered positively. Students also expressed they wanted more opportunities to use this software; because they not only could improve their scores but also, they enjoyed the experience they had using the new strategies software.

  15. SCNS: a graphical tool for reconstructing executable regulatory networks from single-cell genomic data.

    Science.gov (United States)

    Woodhouse, Steven; Piterman, Nir; Wintersteiger, Christoph M; Göttgens, Berthold; Fisher, Jasmin

    2018-05-25

    Reconstruction of executable mechanistic models from single-cell gene expression data represents a powerful approach to understanding developmental and disease processes. New ambitious efforts like the Human Cell Atlas will soon lead to an explosion of data with potential for uncovering and understanding the regulatory networks which underlie the behaviour of all human cells. In order to take advantage of this data, however, there is a need for general-purpose, user-friendly and efficient computational tools that can be readily used by biologists who do not have specialist computer science knowledge. The Single Cell Network Synthesis toolkit (SCNS) is a general-purpose computational tool for the reconstruction and analysis of executable models from single-cell gene expression data. Through a graphical user interface, SCNS takes single-cell qPCR or RNA-sequencing data taken across a time course, and searches for logical rules that drive transitions from early cell states towards late cell states. Because the resulting reconstructed models are executable, they can be used to make predictions about the effect of specific gene perturbations on the generation of specific lineages. SCNS should be of broad interest to the growing number of researchers working in single-cell genomics and will help further facilitate the generation of valuable mechanistic insights into developmental, homeostatic and disease processes.

  16. Radiotherapy: an interactive learning tool

    International Nuclear Information System (INIS)

    Frenzel, T.; Kruell, A.; Schmidt, R.; Dobrucki, W.; Malys, B.

    1998-01-01

    The program is primarily intended for radiological medical technicians, student nurses, students of medicine and physics, and doctors. It is designed as a tool for vocational training and further training and gives comprehensive insight into the daily routines of a radiotherapy unit. The chapters deal with: fundamental biological aspects - fundamental physical aspects - radiation sources and irradiation systems - preparatory examinations - therapies and concepts - irradiation planning - irradiation performance - termination of irradiation treatment. For every page displayed, spoken texts and written, on-screen keywords, illustrations, animated sequences and a large number of videos have been combined in a way easy to digest. The software of the program permits handling also by learners less familiar with computer-based learning. (orig./) [de

  17. Structural zooming research and development of an interactive computer graphical interface for stress analysis of cracks

    Science.gov (United States)

    Gerstle, Walter

    1989-01-01

    Engineering problems sometimes involve the numerical solution of boundary value problems over domains containing geometric feature with widely varying scales. Often, a detailed solution is required at one or more of these features. Small details in large structures may have profound effects upon global performance. Conversely, large-scale conditions may effect local performance. Many man-hours and CPU-hours are currently spent in modeling such problems. With the structural zooming technique, it is now possible to design an integrated program which allows the analyst to interactively focus upon a small region of interest, to modify the local geometry, and then to obtain highly accurate responses in that region which reflect both the properties of the overall structure and the local detail. A boundary integral equation analysis program, called BOAST, was recently developed for the stress analysis of cracks. This program can accurately analyze two-dimensional linear elastic fracture mechanics problems with far less computational effort than existing finite element codes. An interactive computer graphical interface to BOAST was written. The graphical interface would have several requirements: it would be menu-driven, with mouse input; all aspects of input would be entered graphically; the results of a BOAST analysis would be displayed pictorially but also the user would be able to probe interactively to get numerical values of displacement and stress at desired locations within the analysis domain; the entire procedure would be integrated into a single, easy to use package; and it would be written using calls to the graphic package called HOOPS. The program is nearing completion. All of the preprocessing features are working satisfactorily and were debugged. The postprocessing features are under development, and rudimentary postprocessing should be available by the end of the summer. The program was developed and run on a VAX workstation, and must be ported to the SUN

  18. Discerning molecular interactions: A comprehensive review on biomolecular interaction databases and network analysis tools.

    Science.gov (United States)

    Miryala, Sravan Kumar; Anbarasu, Anand; Ramaiah, Sudha

    2018-02-05

    Computational analysis of biomolecular interaction networks is now gaining a lot of importance to understand the functions of novel genes/proteins. Gene interaction (GI) network analysis and protein-protein interaction (PPI) network analysis play a major role in predicting the functionality of interacting genes or proteins and gives an insight into the functional relationships and evolutionary conservation of interactions among the genes. An interaction network is a graphical representation of gene/protein interactome, where each gene/protein is a node, and interaction between gene/protein is an edge. In this review, we discuss the popular open source databases that serve as data repositories to search and collect protein/gene interaction data, and also tools available for the generation of interaction network, visualization and network analysis. Also, various network analysis approaches like topological approach and clustering approach to study the network properties and functional enrichment server which illustrates the functions and pathway of the genes and proteins has been discussed. Hence the distinctive attribute mentioned in this review is not only to provide an overview of tools and web servers for gene and protein-protein interaction (PPI) network analysis but also to extract useful and meaningful information from the interaction networks. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. InteractiveROSETTA: a graphical user interface for the PyRosetta protein modeling suite.

    Science.gov (United States)

    Schenkelberg, Christian D; Bystroff, Christopher

    2015-12-15

    Modern biotechnical research is becoming increasingly reliant on computational structural modeling programs to develop novel solutions to scientific questions. Rosetta is one such protein modeling suite that has already demonstrated wide applicability to a number of diverse research projects. Unfortunately, Rosetta is largely a command-line-driven software package which restricts its use among non-computational researchers. Some graphical interfaces for Rosetta exist, but typically are not as sophisticated as commercial software. Here, we present InteractiveROSETTA, a graphical interface for the PyRosetta framework that presents easy-to-use controls for several of the most widely used Rosetta protocols alongside a sophisticated selection system utilizing PyMOL as a visualizer. InteractiveROSETTA is also capable of interacting with remote Rosetta servers, facilitating sophisticated protocols that are not accessible in PyRosetta or which require greater computational resources. InteractiveROSETTA is freely available at https://github.com/schenc3/InteractiveROSETTA/releases and relies upon a separate download of PyRosetta which is available at http://www.pyrosetta.org after obtaining a license (free for academic use). © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  20. The Effects of the Use of Microsoft Math Tool (Graphical Calculator) Instruction on Students' Performance in Linear Functions

    Science.gov (United States)

    Kissi, Philip Siaw; Opoku, Gyabaah; Boateng, Sampson Kwadwo

    2016-01-01

    The aim of the study was to investigate the effect of Microsoft Math Tool (graphical calculator) on students' achievement in the linear function. The study employed Quasi-experimental research design (Pre-test Post-test two group designs). A total of ninety-eight (98) students were selected for the study from two different Senior High Schools…

  1. An HTML Tool for Production of Interactive Stereoscopic Compositions.

    Science.gov (United States)

    Chistyakov, Alexey; Soto, Maria Teresa; Martí, Enric; Carrabina, Jordi

    2016-12-01

    The benefits of stereoscopic vision in medical applications were appreciated and have been thoroughly studied for more than a century. The usage of the stereoscopic displays has a proven positive impact on performance in various medical tasks. At the same time the market of 3D-enabled technologies is blooming. New high resolution stereo cameras, TVs, projectors, monitors, and head mounted displays become available. This equipment, completed with a corresponding application program interface (API), could be relatively easy implemented in a system. Such complexes could open new possibilities for medical applications exploiting the stereoscopic depth. This work proposes a tool for production of interactive stereoscopic graphical user interfaces, which could represent a software layer for web-based medical systems facilitating the stereoscopic effect. Further the tool's operation mode and the results of the conducted subjective and objective performance tests will be exposed.

  2. KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

    Science.gov (United States)

    Gross, Arnd; Ziepert, Marita; Scholz, Markus

    2012-01-01

    Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

  3. KMWin – A Convenient Tool for Graphical Presentation of Results from Kaplan-Meier Survival Time Analysis

    Science.gov (United States)

    Gross, Arnd; Ziepert, Marita; Scholz, Markus

    2012-01-01

    Background Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. Results On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. Conclusions We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups. PMID:22723912

  4. KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

    Directory of Open Access Journals (Sweden)

    Arnd Gross

    Full Text Available BACKGROUND: Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav, SAS export (xpt or text file (dat, which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. RESULTS: On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. CONCLUSIONS: We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

  5. QR Code: An Interactive Mobile Advertising Tool

    Directory of Open Access Journals (Sweden)

    Ela Sibel Bayrak Meydanoglu

    2013-10-01

    Full Text Available Easy and rapid interaction between consumers and marketers enabled by mobile technology prompted  an increase in the usage of mobile media as an interactive marketing tool in recent years. One of the mobile technologies that can be used in interactive marketing for advertising is QR code (Quick Response Code. Interactive advertising brings back some advantages for the companies that apply it. For example, interaction with consumers provides significant information about consumers' preferences. Marketers can use information obtained from consumers for various marketing activities such as customizing advertisement messages, determining  target audience, improving future products and services. QR codes used in marketing campaigns can provide links to specific websites in which through various tools (e.g. questionnaires, voting information about the needs and wants of customers are collected. The aim of this basic research is to illustrate the contribution of  QR codes to the realization of the advantages gained by interactive advertising.

  6. PipelineDog: a simple and flexible graphic pipeline construction and maintenance tool.

    Science.gov (United States)

    Zhou, Anbo; Zhang, Yeting; Sun, Yazhou; Xing, Jinchuan

    2018-05-01

    Analysis pipelines are an essential part of bioinformatics research, and ad hoc pipelines are frequently created by researchers for prototyping and proof-of-concept purposes. However, most existing pipeline management system or workflow engines are too complex for rapid prototyping or learning the pipeline concept. A lightweight, user-friendly and flexible solution is thus desirable. In this study, we developed a new pipeline construction and maintenance tool, PipelineDog. This is a web-based integrated development environment with a modern web graphical user interface. It offers cross-platform compatibility, project management capabilities, code formatting and error checking functions and an online repository. It uses an easy-to-read/write script system that encourages code reuse. With the online repository, it also encourages sharing of pipelines, which enhances analysis reproducibility and accountability. For most users, PipelineDog requires no software installation. Overall, this web application provides a way to rapidly create and easily manage pipelines. PipelineDog web app is freely available at http://web.pipeline.dog. The command line version is available at http://www.npmjs.com/package/pipelinedog and online repository at http://repo.pipeline.dog. ysun@kean.edu or xing@biology.rutgers.edu or ysun@diagnoa.com. Supplementary data are available at Bioinformatics online.

  7. Dynamic 3-D computer graphics for designing a diagnostic tool for patients with schizophrenia.

    Science.gov (United States)

    Farkas, Attila; Papathomas, Thomas V; Silverstein, Steven M; Kourtev, Hristiyan; Papayanopoulos, John F

    2016-11-01

    We introduce a novel procedure that uses dynamic 3-D computer graphics as a diagnostic tool for assessing disease severity in schizophrenia patients, based on their reduced influence of top-down cognitive processes in interpreting bottom-up sensory input. Our procedure uses the hollow-mask illusion, in which the concave side of the mask is misperceived as convex, because familiarity with convex faces dominates sensory cues signaling a concave mask. It is known that schizophrenia patients resist this illusion and their resistance increases with illness severity. Our method uses virtual masks rendered with two competing textures: (a) realistic features that enhance the illusion; (b) random-dot visual noise that reduces the illusion. We control the relative weights of the two textures to obtain psychometric functions for controls and patients and assess illness severity. The primary novelty is the use of a rotating mask that is easy to implement on a wide variety of portable devices and avoids the use of elaborate stereoscopic devices that have been used in the past. Thus our method, which can also be used to assess the efficacy of treatments, provides clinicians the advantage to bring the test to the patient's own environment, instead of having to bring patients to the clinic.

  8. Development of a Graphical Tool to integrate the Prometheus AEOlus methodology and Jason Platform

    Directory of Open Access Journals (Sweden)

    Rafhael CUNHA

    2017-07-01

    Full Text Available Software Engineering (SE is an area that intends to build high-quality software in a systematic way. However, traditional software engineering techniques and methods do not support the demand for developing Multiagent Systems (MAS. Therefore a new subarea has been studied, called Agent Oriented Software Engineering (AOSE. The AOSE area proposes solutions to issues related to the development of agent oriented systems. There is still no standardization in this subarea, resulting in several methodologies. Another issue of this subarea is that there are very few tools that are able to automatically generate code. In this work we propose a tool to support the Prometheus AEOlus Methodology because it provides modelling artifacts to all MAS dimensions: agents, environment, interaction, and organization. The tool supports all Prometheus AEOlus artifacts and can automatically generated code to the agent and interaction dimensions in the AgentSpeak Language, which is the language used in the Jason Platform. We have done some validations with the proposed tool and a case study is presented.

  9. A USABILITY OF GRAPHIC DESIGN WITH LOCAL CONTENT IN THE INTERACTIVE MULTIMEDIA DESIGN FOR INDONESIAN STORYTELLING

    Directory of Open Access Journals (Sweden)

    Listia Natadjaja

    2004-01-01

    Full Text Available As the computer becomes a trend%2C interactive multimedia design can be one media to communicate the cultural knowledge. A folktale can be a one of the powerful materials to show a country’s culture. The folktale content can be understood effectively by implementing some cultural information background. The main aim of using the local content is to give a vision of the richness culture through graphic design in interactive multimedia technology. By implementing local graphic design based on the cultural background%2C user can have different feeling about the graphic style and the Indonesian richness culture. This method can also help the user to understand the interactive multimedia content easily. Finally%2C graphic design with local content is very effective for a transferring the richness culture. In order to make a good interactive multimedia design content based on a cultural background%2C a designer should need to understand about users%2C culture%2C technology and the whole design process. Abstract in Bahasa Indonesia : Seiring dengan berkembangnya penggunaan komputer menjadi suatu trend%2C interaktif multimedia desain dapat menjadi suatu media untuk mengkomunikasikan suatu pengetahuan mengenai suatu kebudayaan. Cerita rakyat%2C dapat merupakan kekuatan untuk menunjukan budaya suatu negara. Isi dari suatu cerita rakyat dapat dimengerti secara efektif dengan implementasi beberapa latar belakang budaya. Tujuan utama dari penggunaan muatan lokal adalah untuk memberikan suatu visi tentang kekayaan budaya melalui desain grafis dalam teknologi interaktif multimedia. .Dengan mengimplementasikan desain grafis lokal berdasar pada latar belakang budaya%2C pengguna multimedia dapat mempunyai perasaan yang berbeda terhadap gaya desain dan kekayaan budaya Indonesia. Metode ini diharapkan juga dapat membantu pengguna untuk mengerti isi suatu interaktif multimedia secara mudah. Pada akhirnya%2C dapat dikatakan bahwa muatan lokal sangatlah bermanfaat

  10. Interactive graphical system for small-angle scattering analysis of polydisperse systems

    International Nuclear Information System (INIS)

    Konarev, P V; Volkov, V V; Svergun, D I

    2016-01-01

    A program suite for one-dimensional small-angle scattering analysis of polydisperse systems and multiple data sets is presented. The main program, POLYSAS , has a menu-driven graphical user interface calling computational modules from ATSAS package to perform data treatment and analysis. The graphical menu interface allows one to process multiple (time, concentration or temperature-dependent) data sets and interactively change the parameters for the data modelling using sliders. The graphical representation of the data is done via the Winteracter-based program SASPLOT . The package is designed for the analysis of polydisperse systems and mixtures, and permits one to obtain size distributions and evaluate the volume fractions of the components using linear and non-linear fitting algorithms as well as model-independent singular value decomposition. The use of the POLYSAS package is illustrated by the recent examples of its application to study concentration-dependent oligomeric states of proteins and time kinetics of polymer micelles for anticancer drug delivery. (paper)

  11. Advances in Human-Computer Interaction: Graphics and Animation Components for Interface Design

    Science.gov (United States)

    Cipolla Ficarra, Francisco V.; Nicol, Emma; Cipolla-Ficarra, Miguel; Richardson, Lucy

    We present an analysis of communicability methodology in graphics and animation components for interface design, called CAN (Communicability, Acceptability and Novelty). This methodology has been under development between 2005 and 2010, obtaining excellent results in cultural heritage, education and microcomputing contexts. In studies where there is a bi-directional interrelation between ergonomics, usability, user-centered design, software quality and the human-computer interaction. We also present the heuristic results about iconography and layout design in blogs and websites of the following countries: Spain, Italy, Portugal and France.

  12. EPRI compact analyzer: A compact, interactive and color-graphics based simulator for power plant analysis

    International Nuclear Information System (INIS)

    Ipakchi, A.; Khadem, M.; Chen, H.; Colley, R.W.

    1986-01-01

    This paper presents the results of an EPRI sponsored project (RP2395-2) for design and development of an interactive, and color graphics based simulator for power plant analysis. The system is called Compact Analyzer and can be applied to engineering and training applications in the utility industry. The Compact Analyzer's software and system design are described. Results of two demonstration system for a nuclear plant, and a fossil plant are presented, and the applications of the Compact Analyzer to operating procedures evaluation are discussed

  13. Simbuca, using a graphics card to simulate Coulomb interactions in a penning trap

    CERN Document Server

    Van Gorp, S; Friedag, P; De Leebeeck, V; Tandecki, M; Weinheimer, C; Breitenfeldt, M; Traykov, E; Severijn, N; Mader, J; Soti, G; Iitaka, T; Herlert, A; Wauters, F; Zakoucky, D; Kozlov, V; Roccia, S

    2011-01-01

    In almost all cases, N-body simulations are limited by the computation time available. Coulomb interaction calculations scale with O(N(2)) with N the number of particles. Approximation methods exist already to reduce the computation time to O(NlogN) although calculating the interaction still dominates the total simulation time. We present Simbuca, a simulation package for thousands of ions moving in a Penning trap which will be applied for the WITCH experiment. Simbuca uses the output of the Cunbody-1 library, which calculates the gravitational interaction between entities on a graphics card, and adapts it for Coulomb calculations. Furthermore the program incorporates three realistic buffer gas models, the possibility of importing realistic electric and magnetic fieldmaps and different order integrators with adaptive step size and error control. The software is released under the GNU General Public License and free for use. Crown Copyright (C) 2010 Published by Elsevier B.V. All rights reserved.

  14. An interactive graphic simulator for garona nuclear power plant: development and applications

    International Nuclear Information System (INIS)

    Corcuera, P.; Garces, M.; Melara, J.; Gonzalez, J.; Lopez, J.V.

    1999-01-01

    As a result of a R and D project jointly undertaken by Nuclenor S.A. and the University of Cantabria, since the beginning of 1995 Santa Maria de Garona NPP holds its own plant transient and accident simulator for the training of its operators on Emergency Procedures Guides (EPG's). This paper describes the process followed in its development and the derived projects. This interactive graphic simulator is based on the MAAP computer code with an interface developed with DataViews software for X-Window terminals running under UNIX on a Hewlet Packard series 9000/712 workstation. The themarhydraulical code MAAP, with modifications to include all the controls and systems of the plant was chosen due to its capability to simulate primary system, containment and reactor building behavior during transients and accidents of any kind, including those beyond the design basis and also severe accidents. Besides, this code is currently being used for the PSA of the plant. The current configuration consists of several monitors that displays the systems and components situation and the safety parameters through the SPDS (Safety Parameter Display System) displays. With this design the simulator has fulfilled its initial main purpose of training operators on abnormal and emergency procedure guides, revealing as a very efficient and cost effective tool to accomplish this task. Furthermore it has been improved to visualize the real time plant data through the simulator displays. It is also possible to distribute the simulated data to any computer connected to the local area network (LAN). This feature has been applied successfully in the last emergency drills. Other benefits are derived from the fact that the same code is used for training and for the PSA. As an example of its flexibility, the simulator is now being used to validate the new SPDS displays designed to improve the man-machine interface and then it will serve to train the operators on them before their installation at the

  15. Graphic Notation as a Tool in Describing and Analyzing Music Therapy Improvisations

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    1993-01-01

    , involving graphic brainstorms,using coordinative systems and other frameworks, interpretative method including working on specifically musical counter-transference and special graphic exercises are outlined. Work by students at Aalborg University, Denmark, is quoted. General perspectives including relations......Presents graphic notation as the making of aural scores to memorise or analyse improvised music therapy processes, capturing also those aspectsthe usual music notation would not cover. An example in some detail is shown, the music taken from a well known Nordoff/Robbins recording. Training method...... to music analysis in musicology and to the history,epistemology and cultural status of musical notation is discussed....

  16. Tower Mesonetwork Climatology and Interactive Display Tool

    Science.gov (United States)

    Case, Jonathan L.; Bauman, William H., III

    2004-01-01

    Forecasters at the 45th Weather Squadron and Spaceflight Meteorology Group use data from the tower network over the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) to evaluate Launch Commit Criteria, and issue and verify forecasts for ground operations. Systematic biases in these parameters could adversely affect an analysis, forecast, or verification. Also, substantial geographical variations in temperature and wind speed can occur under specific wind directions. To address these concerns, the Applied Meteorology Unit (AMU) developed a climatology of temperatures and winds from the tower network, and identified the geographical variation and significant tower biases. The mesoclimate is largely driven by the complex land-water interfaces across KSC/CCAFS. Towers with close proximity to water typically had much warmer nocturnal temperatures and higher wind speeds throughout the year. The strongest nocturnal wind speeds occurred from October to March whereas the strongest mean daytime wind speeds occurred from February to May. These results of this project can be viewed by forecasters through an interactive graphical user interface developed by the AMU. The web-based interface includes graphical and map displays of mean, standard deviation, bias, and data availability for any combination of towers, variables, months, hours, and wind directions.

  17. imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel.

    Science.gov (United States)

    Grapov, Dmitry; Newman, John W

    2012-09-01

    Interactive modules for Data Exploration and Visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data through a user-friendly interface. Individual modules enables interactive and dynamic analyses of large data by interfacing R's multivariate statistics and highly customizable visualizations with the spreadsheet environment, aiding robust inferences and generating information-rich data visualizations. This tool provides access to multiple comparisons with false discovery correction, hierarchical clustering, principal and independent component analyses, partial least squares regression and discriminant analysis, through an intuitive interface for creating high-quality two- and a three-dimensional visualizations including scatter plot matrices, distribution plots, dendrograms, heat maps, biplots, trellis biplots and correlation networks. Freely available for download at http://sourceforge.net/projects/imdev/. Implemented in R and VBA and supported by Microsoft Excel (2003, 2007 and 2010).

  18. Development of MCAERO wing design panel method with interactive graphics module

    Science.gov (United States)

    Hawk, J. D.; Bristow, D. R.

    1984-01-01

    A reliable and efficient iterative method has been developed for designing wing section contours corresponding to a prescribed subcritical pressure distribution. The design process is initialized by using MCAERO (MCAIR 3-D Subsonic Potential Flow Analysis Code) to analyze a baseline configuration. A second program DMCAERO is then used to calculate a matrix containing the partial derivative of potential at each control point with respect to each unknown geometry parameter by applying a first-order expansion to the baseline equations in MCAERO. This matrix is calculated only once but is used in each iteration cycle to calculate the geometry perturbation and to analyze the perturbed geometry. The potential on the new geometry is calculated by linear extrapolation from the baseline solution. This extrapolated potential is converted to velocity by numerical differentiation, and velocity is converted to pressure by using Bernoulli's equation. There is an interactive graphics option which allows the user to graphically display the results of the design process and to interactively change either the geometry or the prescribed pressure distribution.

  19. Graphics, playability and social interaction, the greatest motivations for playing Call of Duty. Educational reflections

    Directory of Open Access Journals (Sweden)

    Beatriz Elena Marcano Lárez

    2014-01-01

    Full Text Available War videogames raise a lot of controversy in the educational field and are by far the most played videogames worldwide. This study explores the factors that encouraged gamers to choose war videogames with a sample of 387 Call of Duty players. The motivational factors were pinpointed using a non-experimental descriptive exploratory study through an online Likert-type survey that was valid and reliable (Cronbach’s α = 0.897, Kaiser-Meyer-Olkin coefficient, KMO: 0.903. A factor analysis with varimax rotation was applied, which yielded 7 dimensions: graphics/playability; social interaction; learning; challenge/overcoming; fantasy; fun; and competition. Considering the score obtained for each dimension, it can be concluded that the most influential motivational factors were game graphics/playability game and the social interaction allowed by its multiplayer online status, both of them being factors determined by game design elements. These aspects should be considered in the design of educational activities so as to make them impactful and motivational.

  20. Development of interactive graphic user interfaces for modeling reaction-based biogeochemical processes in batch systems with BIOGEOCHEM

    Science.gov (United States)

    Chang, C.; Li, M.; Yeh, G.

    2010-12-01

    The BIOGEOCHEM numerical model (Yeh and Fang, 2002; Fang et al., 2003) was developed with FORTRAN for simulating reaction-based geochemical and biochemical processes with mixed equilibrium and kinetic reactions in batch systems. A complete suite of reactions including aqueous complexation, adsorption/desorption, ion-exchange, redox, precipitation/dissolution, acid-base reactions, and microbial mediated reactions were embodied in this unique modeling tool. Any reaction can be treated as fast/equilibrium or slow/kinetic reaction. An equilibrium reaction is modeled with an implicit finite rate governed by a mass action equilibrium equation or by a user-specified algebraic equation. A kinetic reaction is modeled with an explicit finite rate with an elementary rate, microbial mediated enzymatic kinetics, or a user-specified rate equation. None of the existing models has encompassed this wide array of scopes. To ease the input/output learning curve using the unique feature of BIOGEOCHEM, an interactive graphic user interface was developed with the Microsoft Visual Studio and .Net tools. Several user-friendly features, such as pop-up help windows, typo warning messages, and on-screen input hints, were implemented, which are robust. All input data can be real-time viewed and automated to conform with the input file format of BIOGEOCHEM. A post-processor for graphic visualizations of simulated results was also embedded for immediate demonstrations. By following data input windows step by step, errorless BIOGEOCHEM input files can be created even if users have little prior experiences in FORTRAN. With this user-friendly interface, the time effort to conduct simulations with BIOGEOCHEM can be greatly reduced.

  1. Graphics gems

    CERN Document Server

    Glassner, Andrew S

    1993-01-01

    ""The GRAPHICS GEMS Series"" was started in 1990 by Andrew Glassner. The vision and purpose of the Series was - and still is - to provide tips, techniques, and algorithms for graphics programmers. All of the gems are written by programmers who work in the field and are motivated by a common desire to share interesting ideas and tools with their colleagues. Each volume provides a new set of innovative solutions to a variety of programming problems.

  2. Computerized three-dimensional treatment planning system utilizing interactive colour graphics

    Energy Technology Data Exchange (ETDEWEB)

    McShan, D L; Silverman, A; Lanza, D M; Reinstein, L E; Glicksman, A S [Rhode Island Hospital (US). Dept. of Radiation Oncology

    1979-06-01

    A new computerized radiation treatment planning system has been developed to aid in three-dimensional treatment planning. Using interactive colour graphics in conjunction with a PDP 11/45 computer, the system can take multiple transverse contours and construct a perspective display of the treatment region showing organ surfaces as well as cross-sectional contours. With interactively selected orientations, the display allows easy perception of the relative positioning of the treatment volume and the neighbouring anatomy. For external beam treatment planning, interactive computer simulation is used to select diaphragm sizes which best conform to the target area while avoiding sensitive structures. Dose calculations for the selected beams are carried out on multiple transverse planes. The calculational planes and surfaces are displayed in perspective with radiation dosage displayed in an interactively manipulated colour display. Altogether the system provides an easy assessment of the volume to be irradiated, interactive selection of optimal arrangements of treatment fields and a means of visualizing and evaluating the resulting dose distributions.

  3. Mikado: A graphic program

    Science.gov (United States)

    Secretan, Y.

    A discussion of the modular program Mikado is presented. Mikado was developed with the goal of creating a flexible graphic tool to display and help analyze the results of finite element fluid flow computations. Mikado works on unstructured meshes, with elements of mixed geometric type, but also offers the possibility of using structured meshes. The program can be operated by both menu and mouse (interactive), or by command file (batch). Mikado is written in FORTRAN, except for a few system dependent subroutines which are in C. It runs presently on Silicon Graphics' workstations and could be easily ported to the IBM-RISC System/6000 family of workstations.

  4. HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 4: HARP Output (HARPO) graphics display user's guide

    Science.gov (United States)

    Sproles, Darrell W.; Bavuso, Salvatore J.

    1994-01-01

    The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical postprocessor program HARPO (HARP Output). HARPO reads ASCII files generated by HARP. It provides an interactive plotting capability that can be used to display alternate model data for trade-off analyses. File data can also be imported to other commercial software programs.

  5. The effectiveness of an interactive 3-dimensional computer graphics model for medical education.

    Science.gov (United States)

    Battulga, Bayanmunkh; Konishi, Takeshi; Tamura, Yoko; Moriguchi, Hiroki

    2012-07-09

    Medical students often have difficulty achieving a conceptual understanding of 3-dimensional (3D) anatomy, such as bone alignment, muscles, and complex movements, from 2-dimensional (2D) images. To this end, animated and interactive 3-dimensional computer graphics (3DCG) can provide better visual information to users. In medical fields, research on the advantages of 3DCG in medical education is relatively new. To determine the educational effectiveness of interactive 3DCG. We divided 100 participants (27 men, mean (SD) age 17.9 (0.6) years, and 73 women, mean (SD) age 18.1 (1.1) years) from the Health Sciences University of Mongolia (HSUM) into 3DCG (n = 50) and textbook-only (control) (n = 50) groups. The control group used a textbook and 2D images, while the 3DCG group was trained to use the interactive 3DCG shoulder model in addition to a textbook. We conducted a questionnaire survey via an encrypted satellite network between HSUM and Tokushima University. The questionnaire was scored on a 5-point Likert scale from strongly disagree (score 1) to strongly agree (score 5). Interactive 3DCG was effective in undergraduate medical education. Specifically, there was a significant difference in mean (SD) scores between the 3DCG and control groups in their response to questionnaire items regarding content (4.26 (0.69) vs 3.85 (0.68), P = .001) and teaching methods (4.33 (0.65) vs 3.74 (0.79), P < .001), but no significant difference in the Web category. Participants also provided meaningful comments on the advantages of interactive 3DCG. Interactive 3DCG materials have positive effects on medical education when properly integrated into conventional education. In particular, our results suggest that interactive 3DCG is more efficient than textbooks alone in medical education and can motivate students to understand complex anatomical structures.

  6. Using Graphic Organizers as a Tool for the Development of Scientific Language

    Science.gov (United States)

    Mercuri, Sandra P.

    2010-01-01

    This observational study examines the effectiveness of graphic organizers two elementary teachers in California, United States use to teach the content and the academic language of science. The study was done during the 2006-2007 school year. The data was collected through field-notes and the audio recording of instructional activities, and they…

  7. Standardization of a Graphic Symbol System as an Alternative Communication Tool for Turkish

    Science.gov (United States)

    Karal, Yasemin; Karal, Hasan; Silbir, Lokman; Altun, Taner

    2016-01-01

    Graphic symbols are commonly used across countries in order to support individuals with communicative deficiency. The literature review revealed the absence of such a system for Turkish socio-cultural context. In this study, the aim was to develop a symbol system appropriate for the Turkish socio-cultural context. The process began with studies…

  8. imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel

    Science.gov (United States)

    Grapov, Dmitry; Newman, John W.

    2012-01-01

    Summary: Interactive modules for Data Exploration and Visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data through a user-friendly interface. Individual modules enables interactive and dynamic analyses of large data by interfacing R's multivariate statistics and highly customizable visualizations with the spreadsheet environment, aiding robust inferences and generating information-rich data visualizations. This tool provides access to multiple comparisons with false discovery correction, hierarchical clustering, principal and independent component analyses, partial least squares regression and discriminant analysis, through an intuitive interface for creating high-quality two- and a three-dimensional visualizations including scatter plot matrices, distribution plots, dendrograms, heat maps, biplots, trellis biplots and correlation networks. Availability and implementation: Freely available for download at http://sourceforge.net/projects/imdev/. Implemented in R and VBA and supported by Microsoft Excel (2003, 2007 and 2010). Contact: John.Newman@ars.usda.gov Supplementary Information: Installation instructions, tutorials and users manual are available at http://sourceforge.net/projects/imdev/. PMID:22815358

  9. Performing Re-mediation in Graphical Cyberspace: Mediating Agency, Body and Identity in Virtual Interactional Practices

    DEFF Research Database (Denmark)

    McIlvenny, Paul

    and spectacular multi-media event raises many questions. How do we conceive of the recent developments in media technology and social computing that are impacting on what we have traditionally called 'the mass media'? How is interaction and talk mediated and adapted to new media genres? And how do participants......Promoted as the first academic conference to be held completely in graphical cyberspace, Avatars 98 took place in November 1998. The virtual conference site was built and inhabited using software that supports multi-party presence over the Internet in a simulated, navigable environment. During...... frameworks through the multimedia representations that were 'cast' and 'served' across the Internet. If such a ceremonial event had been broadcast through the institutional medium of television, broadcast talk would have been produced for an eavesdropping 'mass audience'. Instead, the digitally re...

  10. Nanoscale multireference quantum chemistry: full configuration interaction on graphical processing units.

    Science.gov (United States)

    Fales, B Scott; Levine, Benjamin G

    2015-10-13

    Methods based on a full configuration interaction (FCI) expansion in an active space of orbitals are widely used for modeling chemical phenomena such as bond breaking, multiply excited states, and conical intersections in small-to-medium-sized molecules, but these phenomena occur in systems of all sizes. To scale such calculations up to the nanoscale, we have developed an implementation of FCI in which electron repulsion integral transformation and several of the more expensive steps in σ vector formation are performed on graphical processing unit (GPU) hardware. When applied to a 1.7 × 1.4 × 1.4 nm silicon nanoparticle (Si72H64) described with the polarized, all-electron 6-31G** basis set, our implementation can solve for the ground state of the 16-active-electron/16-active-orbital CASCI Hamiltonian (more than 100,000,000 configurations) in 39 min on a single NVidia K40 GPU.

  11. Graphics Tablet Technology in Second Year Thermal Engineering Teaching

    Science.gov (United States)

    Carrillo, Antonio; Cejudo, José Manuel; Domínguez, Fernando; Rodríguez, Eduardo

    2013-01-01

    Graphics tablet technology is well known in markets such as manufacturing, graphics arts and design but it has not yet found widespread acceptance for university teaching. A graphics tablet is an affordable teaching tool that combines the best features from traditional and new media. It allows developing a progressive, interactive lecture (as a…

  12. Tools for Reactive Distillation Column Design: Graphical and Stage-to-Stage Computation Methods

    DEFF Research Database (Denmark)

    Sanchez Daza, O.; Cisneros, Eduardo Salvador P.; Hostrup, Martin

    2001-01-01

    Based on the element mass balance concept, a graphical design method and a stage-to-stage multicomponent design method for reactive distillation columns have been developed. For distillation columns comprising reactive and non-reactive stages, a simple design strategy based on reactive and non......-reactive bubble point calculations is proposed. This strategy tracks the conversion and temperature between the feed and the end stages of the column. An illustrative example highlights the verification of the design strategy through rigorous simulation....

  13. Interactive simulations as teaching tools for engineering mechanics courses

    Science.gov (United States)

    Carbonell, Victoria; Romero, Carlos; Martínez, Elvira; Flórez, Mercedes

    2013-07-01

    This study aimed to gauge the effect of interactive simulations in class as an active teaching strategy for a mechanics course. Engineering analysis and design often use the properties of planar sections in calculations. In the stress analysis of a beam under bending and torsional loads, cross-sectional properties are used to determine stress and displacement distributions in the beam cross section. The centroid, moments and products of inertia of an area made up of several common shapes (rectangles usually) may thus be obtained by adding the moments of inertia of the component areas (U-shape, L-shape, C-shape, etc). This procedure is used to calculate the second moments of structural shapes in engineering practice because the determination of their moments of inertia is necessary for the design of structural components. This paper presents examples of interactive simulations developed for teaching the ‘Mechanics and mechanisms’ course at the Universidad Politecnica de Madrid, Spain. The simulations focus on fundamental topics such as centroids, the properties of the moment of inertia, second moments of inertia with respect to two axes, principal moments of inertia and Mohr's Circle for plane stress, and were composed using Geogebra software. These learning tools feature animations, graphics and interactivity and were designed to encourage student participation and engagement in active learning activities, to effectively explain and illustrate course topics, and to build student problem-solving skills.

  14. Interactive simulations as teaching tools for engineering mechanics courses

    International Nuclear Information System (INIS)

    Carbonell, Victoria; Martínez, Elvira; Flórez, Mercedes; Romero, Carlos

    2013-01-01

    This study aimed to gauge the effect of interactive simulations in class as an active teaching strategy for a mechanics course. Engineering analysis and design often use the properties of planar sections in calculations. In the stress analysis of a beam under bending and torsional loads, cross-sectional properties are used to determine stress and displacement distributions in the beam cross section. The centroid, moments and products of inertia of an area made up of several common shapes (rectangles usually) may thus be obtained by adding the moments of inertia of the component areas (U-shape, L-shape, C-shape, etc). This procedure is used to calculate the second moments of structural shapes in engineering practice because the determination of their moments of inertia is necessary for the design of structural components. This paper presents examples of interactive simulations developed for teaching the ‘Mechanics and mechanisms’ course at the Universidad Politecnica de Madrid, Spain. The simulations focus on fundamental topics such as centroids, the properties of the moment of inertia, second moments of inertia with respect to two axes, principal moments of inertia and Mohr's Circle for plane stress, and were composed using Geogebra software. These learning tools feature animations, graphics and interactivity and were designed to encourage student participation and engagement in active learning activities, to effectively explain and illustrate course topics, and to build student problem-solving skills. (paper)

  15. An automated graphics tool for comparative genomics: the Coulson plot generator.

    Science.gov (United States)

    Field, Helen I; Coulson, Richard M R; Field, Mark C

    2013-04-27

    Comparative analysis is an essential component to biology. When applied to genomics for example, analysis may require comparisons between the predicted presence and absence of genes in a group of genomes under consideration. Frequently, genes can be grouped into small categories based on functional criteria, for example membership of a multimeric complex, participation in a metabolic or signaling pathway or shared sequence features and/or paralogy. These patterns of retention and loss are highly informative for the prediction of function, and hence possible biological context, and can provide great insights into the evolutionary history of cellular functions. However, representation of such information in a standard spreadsheet is a poor visual means from which to extract patterns within a dataset. We devised the Coulson Plot, a new graphical representation that exploits a matrix of pie charts to display comparative genomics data. Each pie is used to describe a complex or process from a separate taxon, and is divided into sectors corresponding to the number of proteins (subunits) in a complex/process. The predicted presence or absence of proteins in each complex are delineated by occupancy of a given sector; this format is visually highly accessible and makes pattern recognition rapid and reliable. A key to the identity of each subunit, plus hierarchical naming of taxa and coloring are included. A java-based application, the Coulson plot generator (CPG) automates graphic production, with a tab or comma-delineated text file as input and generating an editable portable document format or svg file. CPG software may be used to rapidly convert spreadsheet data to a graphical matrix pie chart format. The representation essentially retains all of the information from the spreadsheet but presents a graphically rich format making comparisons and identification of patterns significantly clearer. While the Coulson plot format is highly useful in comparative genomics, its

  16. Interactive Media and Simulation Tools for Technical Training

    Science.gov (United States)

    Gramoll, Kurt

    1997-01-01

    Over the last several years, integration of multiple media sources into a single information system has been rapidly developing. It has been found that when sound, graphics, text, animations, and simulations are skillfully integrated, the sum of the parts exceeds the individual parts for effective learning. In addition, simulations can be used to design and understand complex engineering processes. With the recent introduction of many high-level authoring, animation, modeling, and rendering programs for personal computers, significant multimedia programs can be developed by practicing engineers, scientists and even managers for both training and education. However, even with these new tools, a considerable amount of time is required to produce an interactive multimedia program. The development of both CD-ROM and Web-based programs are discussed in addition to the use of technically oriented animations. Also examined are various multimedia development tools and how they are used to develop effective engineering education courseware. Demonstrations of actual programs in engineering mechanics are shown.

  17. DataHigh: graphical user interface for visualizing and interacting with high-dimensional neural activity

    Science.gov (United States)

    Cowley, Benjamin R.; Kaufman, Matthew T.; Butler, Zachary S.; Churchland, Mark M.; Ryu, Stephen I.; Shenoy, Krishna V.; Yu, Byron M.

    2013-12-01

    Objective. Analyzing and interpreting the activity of a heterogeneous population of neurons can be challenging, especially as the number of neurons, experimental trials, and experimental conditions increases. One approach is to extract a set of latent variables that succinctly captures the prominent co-fluctuation patterns across the neural population. A key problem is that the number of latent variables needed to adequately describe the population activity is often greater than 3, thereby preventing direct visualization of the latent space. By visualizing a small number of 2-d projections of the latent space or each latent variable individually, it is easy to miss salient features of the population activity. Approach. To address this limitation, we developed a Matlab graphical user interface (called DataHigh) that allows the user to quickly and smoothly navigate through a continuum of different 2-d projections of the latent space. We also implemented a suite of additional visualization tools (including playing out population activity timecourses as a movie and displaying summary statistics, such as covariance ellipses and average timecourses) and an optional tool for performing dimensionality reduction. Main results. To demonstrate the utility and versatility of DataHigh, we used it to analyze single-trial spike count and single-trial timecourse population activity recorded using a multi-electrode array, as well as trial-averaged population activity recorded using single electrodes. Significance. DataHigh was developed to fulfil a need for visualization in exploratory neural data analysis, which can provide intuition that is critical for building scientific hypotheses and models of population activity.

  18. DataHigh: graphical user interface for visualizing and interacting with high-dimensional neural activity.

    Science.gov (United States)

    Cowley, Benjamin R; Kaufman, Matthew T; Butler, Zachary S; Churchland, Mark M; Ryu, Stephen I; Shenoy, Krishna V; Yu, Byron M

    2013-12-01

    Analyzing and interpreting the activity of a heterogeneous population of neurons can be challenging, especially as the number of neurons, experimental trials, and experimental conditions increases. One approach is to extract a set of latent variables that succinctly captures the prominent co-fluctuation patterns across the neural population. A key problem is that the number of latent variables needed to adequately describe the population activity is often greater than 3, thereby preventing direct visualization of the latent space. By visualizing a small number of 2-d projections of the latent space or each latent variable individually, it is easy to miss salient features of the population activity. To address this limitation, we developed a Matlab graphical user interface (called DataHigh) that allows the user to quickly and smoothly navigate through a continuum of different 2-d projections of the latent space. We also implemented a suite of additional visualization tools (including playing out population activity timecourses as a movie and displaying summary statistics, such as covariance ellipses and average timecourses) and an optional tool for performing dimensionality reduction. To demonstrate the utility and versatility of DataHigh, we used it to analyze single-trial spike count and single-trial timecourse population activity recorded using a multi-electrode array, as well as trial-averaged population activity recorded using single electrodes. DataHigh was developed to fulfil a need for visualization in exploratory neural data analysis, which can provide intuition that is critical for building scientific hypotheses and models of population activity.

  19. DataHigh: Graphical user interface for visualizing and interacting with high-dimensional neural activity

    Science.gov (United States)

    Cowley, Benjamin R.; Kaufman, Matthew T.; Butler, Zachary S.; Churchland, Mark M.; Ryu, Stephen I.; Shenoy, Krishna V.; Yu, Byron M.

    2014-01-01

    Objective Analyzing and interpreting the activity of a heterogeneous population of neurons can be challenging, especially as the number of neurons, experimental trials, and experimental conditions increases. One approach is to extract a set of latent variables that succinctly captures the prominent co-fluctuation patterns across the neural population. A key problem is that the number of latent variables needed to adequately describe the population activity is often greater than three, thereby preventing direct visualization of the latent space. By visualizing a small number of 2-d projections of the latent space or each latent variable individually, it is easy to miss salient features of the population activity. Approach To address this limitation, we developed a Matlab graphical user interface (called DataHigh) that allows the user to quickly and smoothly navigate through a continuum of different 2-d projections of the latent space. We also implemented a suite of additional visualization tools (including playing out population activity timecourses as a movie and displaying summary statistics, such as covariance ellipses and average timecourses) and an optional tool for performing dimensionality reduction. Main results To demonstrate the utility and versatility of DataHigh, we used it to analyze single-trial spike count and single-trial timecourse population activity recorded using a multi-electrode array, as well as trial-averaged population activity recorded using single electrodes. Significance DataHigh was developed to fulfill a need for visualization in exploratory neural data analysis, which can provide intuition that is critical for building scientific hypotheses and models of population activity. PMID:24216250

  20. An Evaluation of the Interactive Query Expansion in an Online Library Catalogue with a Graphical User Interface.

    Science.gov (United States)

    Hancock-Beaulieu, Micheline; And Others

    1995-01-01

    An online library catalog was used to evaluate an interactive query expansion facility based on relevance feedback for the Okapi, probabilistic, term weighting, retrieval system. A graphical user interface allowed searchers to select candidate terms extracted from relevant retrieved items to reformulate queries. Results suggested that the…

  1. Human-scale interaction for virtual model displays: a clear case for real tools

    Science.gov (United States)

    Williams, George C.; McDowall, Ian E.; Bolas, Mark T.

    1998-04-01

    We describe a hand-held user interface for interacting with virtual environments displayed on a Virtual Model Display. The tool, constructed entirely of transparent materials, is see-through. We render a graphical counterpart of the tool on the display and map it one-to-one with the real tool. This feature, combined with a capability for touch- sensitive, discrete input, results in a useful spatial input device that is visually versatile. We discuss the tool's design and interaction techniques it supports. Briefly, we look at the human factors issues and engineering challenges presented by this tool and, in general, by the class of hand-held user interfaces that are see-through.

  2. The XChemExplorer graphical workflow tool for routine or large-scale protein–ligand structure determination

    Science.gov (United States)

    Krojer, Tobias; Talon, Romain; Pearce, Nicholas; Douangamath, Alice; Brandao-Neto, Jose; Dias, Alexandre; Marsden, Brian

    2017-01-01

    XChemExplorer (XCE) is a data-management and workflow tool to support large-scale simultaneous analysis of protein–ligand complexes during structure-based ligand discovery (SBLD). The user interfaces of established crystallo­graphic software packages such as CCP4 [Winn et al. (2011 ▸), Acta Cryst. D67, 235–242] or PHENIX [Adams et al. (2010 ▸), Acta Cryst. D66, 213–221] have entrenched the paradigm that a ‘project’ is concerned with solving one structure. This does not hold for SBLD, where many almost identical structures need to be solved and analysed quickly in one batch of work. Functionality to track progress and annotate structures is essential. XCE provides an intuitive graphical user interface which guides the user from data processing, initial map calculation, ligand identification and refinement up until data dissemination. It provides multiple entry points depending on the need of each project, enables batch processing of multiple data sets and records metadata, progress and annotations in an SQLite database. XCE is freely available and works on any Linux and Mac OS X system, and the only dependency is to have the latest version of CCP4 installed. The design and usage of this tool are described here, and its usefulness is demonstrated in the context of fragment-screening campaigns at the Diamond Light Source. It is routinely used to analyse projects comprising 1000 data sets or more, and therefore scales well to even very large ligand-design projects. PMID:28291762

  3. Overcoming language and cultural barriers: a graphical communication tool to perform a parasitological screening in two vulnerable populations from Argentina.

    Science.gov (United States)

    Buyayisqui, María Pía; Bordoni, Noemí; Garbossa, Graciela

    2013-01-01

    This is an exploratory study of the application of a support tool for the detection of asymptomatic subjects carrying enteric parasites in two vulnerable populations in Argentina: a shantytown in the city of Buenos Aires and a rural Wichí indigenous community in the province of Chaco. The ethnic and cultural diversity, high illiteracy rate, and language barriers called for the development of an auxiliary resource to explain stool sample collection procedures. In individual interviews with each family, the authors used two instructional guidance leaflets in comic strip format depicting the procedures. They evaluated the acceptance of the graphical communication tool on the basis of the number of retrieved samples. Percentages of respondent families were 72.2% and 66.7%, respectively. Definitive validation of these instruments would allow their use in community studies, community service learning experiences, and research on aboriginal communities that would otherwise be excluded from studies on health status.

  4. The Graphics Tablet - A Valuable Tool for the Digital STEM Teacher

    Science.gov (United States)

    Stephens, Jeff

    2018-04-01

    I am inspired to write this article after coming across some publications in The Physics Teacher that all hit on topics of personal interest and experience. Similarly to Christensen my goal in writing this is to encourage other physics educators to take advantage of modern technology in delivering content to students and to feel comfortable doing so. There are numerous ways in which to create screencasts and lecture videos, some of which have been addressed in other articles. I invite those interested in learning how to create these videos to contact their educational technology staff or perform some internet searches on the topic. I will focus this article on the technology that enhanced the content I was delivering to my students. I will share a bit of my journey towards creating video materials and introduce a vital piece of technology, the graphics tablet, which changed the way I communicate with my students.

  5. SDAR: a practical tool for graphical analysis of two-dimensional data

    Directory of Open Access Journals (Sweden)

    Weeratunga Saroja

    2012-08-01

    Full Text Available Abstract Background Two-dimensional data needs to be processed and analysed in almost any experimental laboratory. Some tasks in this context may be performed with generic software such as spreadsheet programs which are available ubiquitously, others may require more specialised software that requires paid licences. Additionally, more complex software packages typically require more time by the individual user to understand and operate. Practical and convenient graphical data analysis software in Java with a user-friendly interface are rare. Results We have developed SDAR, a Java application to analyse two-dimensional data with an intuitive graphical user interface. A smart ASCII parser allows import of data into SDAR without particular format requirements. The centre piece of SDAR is the Java class GraphPanel which provides methods for generic tasks of data visualisation. Data can be manipulated and analysed with respect to the most common operations experienced in an experimental biochemical laboratory. Images of the data plots can be generated in SVG-, TIFF- or PNG-format. Data exported by SDAR is annotated with commands compatible with the Grace software. Conclusion Since SDAR is implemented in Java, it is truly cross-platform compatible. The software is easy to install, and very convenient to use judging by experience in our own laboratories. It is freely available to academic users at http://www.structuralchemistry.org/pcsb/. To download SDAR, users will be asked for their name, institution and email address. A manual, as well as the source code of the GraphPanel class can also be downloaded from this site.

  6. A development of a quantitative situation awareness measurement tool: Computational Representation of Situation Awareness with Graphical Expressions (CoRSAGE)

    International Nuclear Information System (INIS)

    Yim, Ho Bin; Lee, Seung Min; Seong, Poong Hyun

    2014-01-01

    Highlights: • We proposed quantitative situation awareness (SA) evaluation technique. • We developed a computer based SA evaluation tool for NPPs training environment. • We introduced three rules and components to express more human-like results. • We conducted three sets of training with real plant operators. • Results showed that the tool could reasonably represent operator’s SA. - Abstract: Operator performance measures are used for multiple purposes, such as control room design, human system interface (HSI) evaluation, training, and so on. Performance measures are often focused on results; however, especially for a training purpose – at least in a nuclear industry, more detailed descriptions about processes are required. Situation awareness (SA) measurements have directly/indirectly played as a complimentary measure and provided descriptive insights on how to improve performance of operators for the next training. Unfortunately, most of the well-developed SA measurement techniques, such as Situation Awareness Global Assessment Technique (SAGAT) need an expert opinion which sometimes troubles easy spread of measurement’s application or usage. A quantitative SA measurement tool named Computational Representation of Situation Awareness with Graphical Expressions (CoRSAGE) is introduced to resolve some of these concerns. CoRSAGE is based on production rules to represent a human operator’s cognitive process of problem solving, and Bayesian inference to quantify it. Petri Net concept is also used for graphical expressions of SA flow. Three components – inference transition, volatile/non-volatile memory tokens – were newly developed to achieve required functions. Training data of a Loss of Coolant Accident (LOCA) scenario for an emergency condition and an earthquake scenario for an abnormal condition by real plant operators were used to validate the tool. The validation result showed that CoRSAGE performed a reasonable match to other performance

  7. SnopViz, an interactive snow profile visualization tool

    Science.gov (United States)

    Fierz, Charles; Egger, Thomas; gerber, Matthias; Bavay, Mathias; Techel, Frank

    2016-04-01

    SnopViz is a visualization tool for both simulation outputs of the snow-cover model SNOWPACK and observed snow profiles. It has been designed to fulfil the needs of operational services (Swiss Avalanche Warning Service, Avalanche Canada) as well as offer the flexibility required to satisfy the specific needs of researchers. This JavaScript application runs on any modern browser and does not require an active Internet connection. The open source code is available for download from models.slf.ch where examples can also be run. Both the SnopViz library and the SnopViz User Interface will become a full replacement of the current research visualization tool SN_GUI for SNOWPACK. The SnopViz library is a stand-alone application that parses the provided input files, for example, a single snow profile (CAAML file format) or multiple snow profiles as output by SNOWPACK (PRO file format). A plugin architecture allows for handling JSON objects (JavaScript Object Notation) as well and plugins for other file formats may be added easily. The outputs are provided either as vector graphics (SVG) or JSON objects. The SnopViz User Interface (UI) is a browser based stand-alone interface. It runs in every modern browser, including IE, and allows user interaction with the graphs. SVG, the XML based standard for vector graphics, was chosen because of its easy interaction with JS and a good software support (Adobe Illustrator, Inkscape) to manipulate graphs outside SnopViz for publication purposes. SnopViz provides new visualization for SNOWPACK timeline output as well as time series input and output. The actual output format for SNOWPACK timelines was retained while time series are read from SMET files, a file format used in conjunction with the open source data handling code MeteoIO. Finally, SnopViz is able to render single snow profiles, either observed or modelled, that are provided as CAAML-file. This file format (caaml.org/Schemas/V5.0/Profiles/SnowProfileIACS) is an international

  8. An interactive visualization tool for mobile objects

    Science.gov (United States)

    Kobayashi, Tetsuo

    Recent advancements in mobile devices---such as Global Positioning System (GPS), cellular phones, car navigation system, and radio-frequency identification (RFID)---have greatly influenced the nature and volume of data about individual-based movement in space and time. Due to the prevalence of mobile devices, vast amounts of mobile objects data are being produced and stored in databases, overwhelming the capacity of traditional spatial analytical methods. There is a growing need for discovering unexpected patterns, trends, and relationships that are hidden in the massive mobile objects data. Geographic visualization (GVis) and knowledge discovery in databases (KDD) are two major research fields that are associated with knowledge discovery and construction. Their major research challenges are the integration of GVis and KDD, enhancing the ability to handle large volume mobile objects data, and high interactivity between the computer and users of GVis and KDD tools. This dissertation proposes a visualization toolkit to enable highly interactive visual data exploration for mobile objects datasets. Vector algebraic representation and online analytical processing (OLAP) are utilized for managing and querying the mobile object data to accomplish high interactivity of the visualization tool. In addition, reconstructing trajectories at user-defined levels of temporal granularity with time aggregation methods allows exploration of the individual objects at different levels of movement generality. At a given level of generality, individual paths can be combined into synthetic summary paths based on three similarity measures, namely, locational similarity, directional similarity, and geometric similarity functions. A visualization toolkit based on the space-time cube concept exploits these functionalities to create a user-interactive environment for exploring mobile objects data. Furthermore, the characteristics of visualized trajectories are exported to be utilized for data

  9. Tools for controlling protein interactions with light

    Science.gov (United States)

    Tucker, Chandra L.; Vrana, Justin D.; Kennedy, Matthew J.

    2014-01-01

    Genetically-encoded actuators that allow control of protein-protein interactions with light, termed ‘optical dimerizers’, are emerging as new tools for experimental biology. In recent years, numerous new and versatile dimerizer systems have been developed. Here we discuss the design of optical dimerizer experiments, including choice of a dimerizer system, photoexcitation sources, and coordinate use of imaging reporters. We provide detailed protocols for experiments using two dimerization systems we previously developed, CRY2/CIB and UVR8/UVR8, for use controlling transcription, protein localization, and protein secretion with light. Additionally, we provide instructions and software for constructing a pulse-controlled LED light device for use in experiments requiring extended light treatments. PMID:25181301

  10. AGILE, a tool for interactive lattice design

    CERN Document Server

    Bryant, P J

    2000-01-01

    AGILE is a program that works in the IBM-PC, MS-Windows environment and is dedicated to the interactive design of alternating-gradient lattices for synchrotrons and transfer lines. The program was originally intended as a teaching tool, but has been used mostly for professional design work and is subject to continuous development. It contains original algorithms for coupling, scattering and eddy currents, and some slightly unusual algorithms for off-axis orbits and space charge. There are also additional features such as engineering design aids, calculators for relativistic and synchrotron radiation parameters, expert routines for optimising slow extraction, fitting and matching, and the internal storage of constants for over 1000 stable and quasi-stable charged particles. The program is object-oriented and fully integrated into the Windows environment - it is not a shell. Apart from office work, AGILE is ideal for home use, design workshops and when travelling. It is particularly suited to practical problems...

  11. Learning Photogrammetry with Interactive Software Tool PhoX

    Directory of Open Access Journals (Sweden)

    T. Luhmann

    2016-06-01

    Full Text Available Photogrammetry is a complex topic in high-level university teaching, especially in the fields of geodesy, geoinformatics and metrology where high quality results are demanded. In addition, more and more black-box solutions for 3D image processing and point cloud generation are available that generate nice results easily, e.g. by structure-from-motion approaches. Within this context, the classical approach of teaching photogrammetry (e.g. focusing on aerial stereophotogrammetry has to be reformed in order to educate students and professionals with new topics and provide them with more information behind the scene. Since around 20 years photogrammetry courses at the Jade University of Applied Sciences in Oldenburg, Germany, include the use of digital photogrammetry software that provide individual exercises, deep analysis of calculation results and a wide range of visualization tools for almost all standard tasks in photogrammetry. During the last years the software package PhoX has been developed that is part of a new didactic concept in photogrammetry and related subjects. It also serves as analysis tool in recent research projects. PhoX consists of a project-oriented data structure for images, image data, measured points and features and 3D objects. It allows for almost all basic photogrammetric measurement tools, image processing, calculation methods, graphical analysis functions, simulations and much more. Students use the program in order to conduct predefined exercises where they have the opportunity to analyse results in a high level of detail. This includes the analysis of statistical quality parameters but also the meaning of transformation parameters, rotation matrices, calibration and orientation data. As one specific advantage, PhoX allows for the interactive modification of single parameters and the direct view of the resulting effect in image or object space.

  12. Learning Photogrammetry with Interactive Software Tool PhoX

    Science.gov (United States)

    Luhmann, T.

    2016-06-01

    Photogrammetry is a complex topic in high-level university teaching, especially in the fields of geodesy, geoinformatics and metrology where high quality results are demanded. In addition, more and more black-box solutions for 3D image processing and point cloud generation are available that generate nice results easily, e.g. by structure-from-motion approaches. Within this context, the classical approach of teaching photogrammetry (e.g. focusing on aerial stereophotogrammetry) has to be reformed in order to educate students and professionals with new topics and provide them with more information behind the scene. Since around 20 years photogrammetry courses at the Jade University of Applied Sciences in Oldenburg, Germany, include the use of digital photogrammetry software that provide individual exercises, deep analysis of calculation results and a wide range of visualization tools for almost all standard tasks in photogrammetry. During the last years the software package PhoX has been developed that is part of a new didactic concept in photogrammetry and related subjects. It also serves as analysis tool in recent research projects. PhoX consists of a project-oriented data structure for images, image data, measured points and features and 3D objects. It allows for almost all basic photogrammetric measurement tools, image processing, calculation methods, graphical analysis functions, simulations and much more. Students use the program in order to conduct predefined exercises where they have the opportunity to analyse results in a high level of detail. This includes the analysis of statistical quality parameters but also the meaning of transformation parameters, rotation matrices, calibration and orientation data. As one specific advantage, PhoX allows for the interactive modification of single parameters and the direct view of the resulting effect in image or object space.

  13. imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel

    Science.gov (United States)

    Interactive modules for data exploration and visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data sets with a user-friendly interface. Individual modules were designed to provide toolsets to enable interactive ...

  14. CyberTEAM Interactive Epicenter Locator Tool

    Science.gov (United States)

    Ouyang, Y.; Hayden, K.; Lehmann, M.; Kilb, D.

    2008-12-01

    News coverage showing collapsed buildings, broken bridges and smashed cars help middle school students visualize the hazardous nature of earthquakes. However, few students understand how scientists investigate earthquakes through analysis of data collected using technology devices from around the world. The important findings by Muawia Barazangi and James Dorman in 1969 revealed how earthquakes charted between 1961 and 1967 delineated narrow belts of seismicity. This important discovery prompted additional research that eventually led to the theory of plate tectonics. When a large earthquake occurs, people from distances near and far can feel it to varying degrees. But how do scientists examine data to identify the locations of earthquake epicenters? The scientific definition of an earthquake: "a movement within the Earth's crust or mantle, caused by the sudden rupture or repositioning of underground material as they release stress" can be confusing for students first studying Earth science in 6th grade. Students struggle with understanding how scientists can tell when and where a rupture occurs, when the inner crust and mantle are not visible to us. Our CyberTEAM project provides 6th grade teachers with the opportunity to engage adolescents in activities that make textbooks come alive as students manipulate the same data that today's scientists use. We have developed an Earthquake Epicenter Location Tool that includes two Flash-based interactive learning objects that can be used to study basic seismology concepts and lets the user determine earthquake epicenters from current data. Through the Wilber II system maintained at the IRIS (Incorporated Research Institutions for Seismology) Web site, this project retrieves seismic data of recent earthquakes and makes them available to the public. Students choose an earthquake to perform further explorations. For each earthquake, a selection of USArray seismic stations are marked on a Google Map. Picking a station on the

  15. Graphic Novels: A New Stress Mitigation Tool for Military Training: Developing Content for Hard-to-Reach Audiences.

    Science.gov (United States)

    Hourani, Laurel; Lambert, Shari; Peeler, Russ; Lane, Becky; Borst, Carrie

    2017-05-01

    This article describes the development of two graphic novels as a new approach to mental health communication and coping strategies for the Navy and Marine Corps. The novels are intended to capture the attention of the younger target audience and provide vital teaching messages to better prepare personnel for deployment to combat zones. The novels were developed based on embedding the principles of combat and operational stress control (COSC) into realistic and relatable characters, stories, and images. Approaches used for development included (a) basing storylines on real-life service members and the situations they face in combat and their personal lives; (b) partnering with COSC experts to embed teaching points; (c) ensuring technical accuracy through research and target audience reviews of the storyboard and artwork; (d) developing characters that are representative of the target audience, with varied jobs, ages, backgrounds, and professional concerns; and (e) designing artwork in a manner sensitive to training objectives and the psychological effects on readers. Because technical accuracy, realism, and sensitivity were noted as essential components of an effective graphic novel tool, focus-group research and review of author drafts by the target audience and technical experts are strongly recommended.

  16. Software Tools For Large Scale Interactive Hydrodynamic Modeling

    NARCIS (Netherlands)

    Donchyts, G.; Baart, F.; van Dam, A; Jagers, B; van der Pijl, S.; Piasecki, M.

    2014-01-01

    Developing easy-to-use software that combines components for simultaneous visualization, simulation and interaction is a great challenge. Mainly, because it involves a number of disciplines, like computational fluid dynamics, computer graphics, high-performance computing. One of the main

  17. High-Throughput Tabular Data Processor - Platform independent graphical tool for processing large data sets.

    Science.gov (United States)

    Madanecki, Piotr; Bałut, Magdalena; Buckley, Patrick G; Ochocka, J Renata; Bartoszewski, Rafał; Crossman, David K; Messiaen, Ludwine M; Piotrowski, Arkadiusz

    2018-01-01

    High-throughput technologies generate considerable amount of data which often requires bioinformatic expertise to analyze. Here we present High-Throughput Tabular Data Processor (HTDP), a platform independent Java program. HTDP works on any character-delimited column data (e.g. BED, GFF, GTF, PSL, WIG, VCF) from multiple text files and supports merging, filtering and converting of data that is produced in the course of high-throughput experiments. HTDP can also utilize itemized sets of conditions from external files for complex or repetitive filtering/merging tasks. The program is intended to aid global, real-time processing of large data sets using a graphical user interface (GUI). Therefore, no prior expertise in programming, regular expression, or command line usage is required of the user. Additionally, no a priori assumptions are imposed on the internal file composition. We demonstrate the flexibility and potential of HTDP in real-life research tasks including microarray and massively parallel sequencing, i.e. identification of disease predisposing variants in the next generation sequencing data as well as comprehensive concurrent analysis of microarray and sequencing results. We also show the utility of HTDP in technical tasks including data merge, reduction and filtering with external criteria files. HTDP was developed to address functionality that is missing or rudimentary in other GUI software for processing character-delimited column data from high-throughput technologies. Flexibility, in terms of input file handling, provides long term potential functionality in high-throughput analysis pipelines, as the program is not limited by the currently existing applications and data formats. HTDP is available as the Open Source software (https://github.com/pmadanecki/htdp).

  18. Development of a clinical applicable graphical user interface to automatically detect exercise oscillatory ventilation: The VOdEX-tool.

    Science.gov (United States)

    Cornelis, Justien; Denis, Tim; Beckers, Paul; Vrints, Christiaan; Vissers, Dirk; Goossens, Maggy

    2017-08-01

    Cardiopulmonary exercise testing (CPET) gained importance in the prognostic assessment of especially patients with heart failure (HF). A meaningful prognostic parameter for early mortality in HF is exercise oscillatory ventilation (EOV). This abnormal respiratory pattern is recognized by hypo- and hyperventilation during CPET. Up until now, assessment of EOV is mainly done upon visual agreement or manual calculation. The purpose of this research was to automate the interpretation of EOV so this prognostic parameter could be readily investigated during CPET. Preliminary, four definitions describing the original characteristics of EOV, were selected and integrated in the "Ventilatory Oscillations during Exercise-tool" (VOdEX-tool), a graphical user interface that allows automate calculation of EOV. A Discrete Meyer Level 2 wavelet transformation appeared to be the optimal filter to apply on the collected breath-by-breath minute ventilation CPET data. Divers aspects of the definitions i.e. cycle length, amplitude, regularity and total duration of EOV were combined and calculated. The oscillations meeting the criteria were visualised. Filter methods and cut-off criteria were made adjustable for clinical application and research. The VOdEX-tool was connected to a database. The VOdEX-tool provides the possibility to calculate EOV automatically and to present the clinician an overview of the presence of EOV at a glance. The computerized analysis of EOV can be made readily available in clinical practice by integrating the tool in the manufactures existing CPET software. The VOdEX-tool enhances assessment of EOV and therefore contributes to the estimation of prognosis in especially patients with HF. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  19. NASCENT: an automatic protein interaction network generation tool for non-model organisms.

    Science.gov (United States)

    Banky, Daniel; Ordog, Rafael; Grolmusz, Vince

    2009-04-24

    Large quantity of reliable protein interaction data are available for model organisms in public depositories (e.g., MINT, DIP, HPRD, INTERACT). Most data correspond to experiments with the proteins of Saccharomyces cerevisiae, Drosophila melanogaster, Homo sapiens, Caenorhabditis elegans, Escherichia coli and Mus musculus. For other important organisms the data availability is poor or non-existent. Here we present NASCENT, a completely automatic web-based tool and also a downloadable Java program, capable of modeling and generating protein interaction networks even for non-model organisms. The tool performs protein interaction network modeling through gene-name mapping, and outputs the resulting network in graphical form and also in computer-readable graph-forms, directly applicable by popular network modeling software. http://nascent.pitgroup.org.

  20. Sequence walkers: a graphical method to display how binding proteins interact with DNA or RNA sequences | Center for Cancer Research

    Science.gov (United States)

    A graphical method is presented for displaying how binding proteins and other macromolecules interact with individual bases of nucleotide sequences. Characters representing the sequence are either oriented normally and placed above a line indicating favorable contact, or upside-down and placed below the line indicating unfavorable contact. The positive or negative height of each letter shows the contribution of that base to the average sequence conservation of the binding site, as represented by a sequence logo.

  1. MatchGUI: A Graphical MATLAB-Based Tool for Automatic Image Co-Registration

    Science.gov (United States)

    Ansar, Adnan I.

    2011-01-01

    MatchGUI software, based on MATLAB, automatically matches two images and displays the match result by superimposing one image on the other. A slider bar allows focus to shift between the two images. There are tools for zoom, auto-crop to overlap region, and basic image markup. Given a pair of ortho-rectified images (focused primarily on Mars orbital imagery for now), this software automatically co-registers the imagery so that corresponding image pixels are aligned. MatchGUI requires minimal user input, and performs a registration over scale and inplane rotation fully automatically

  2. Graphics-processing-unit-accelerated finite-difference time-domain simulation of the interaction between ultrashort laser pulses and metal nanoparticles

    Science.gov (United States)

    Nikolskiy, V. P.; Stegailov, V. V.

    2018-01-01

    Metal nanoparticles (NPs) serve as important tools for many modern technologies. However, the proper microscopic models of the interaction between ultrashort laser pulses and metal NPs are currently not very well developed in many cases. One part of the problem is the description of the warm dense matter that is formed in NPs after intense irradiation. Another part of the problem is the description of the electromagnetic waves around NPs. Description of wave propagation requires the solution of Maxwell’s equations and the finite-difference time-domain (FDTD) method is the classic approach for solving them. There are many commercial and free implementations of FDTD, including the open source software that supports graphics processing unit (GPU) acceleration. In this report we present the results on the FDTD calculations for different cases of the interaction between ultrashort laser pulses and metal nanoparticles. Following our previous results, we analyze the efficiency of the GPU acceleration of the FDTD algorithm.

  3. An interactive tool for gamut masking

    Science.gov (United States)

    Song, Ying; Lau, Cheryl; Süsstrunk, Sabine

    2014-02-01

    Artists often want to change the colors of an image to achieve a particular aesthetic goal. For example, they might limit colors to a warm or cool color scheme to create an image with a certain mood or feeling. Gamut masking is a technique that artists use to limit the set of colors they can paint with. They draw a mask over a color wheel and only use the hues within the mask. However, creating the color palette from the mask and applying the colors to the image requires skill. We propose an interactive tool for gamut masking that allows amateur artists to create an image with a desired mood or feeling. Our system extracts a 3D color gamut from the 2D user-drawn mask and maps the image to this gamut. The user can draw a different gamut mask or locally refine the image colors. Our voxel grid gamut representation allows us to represent gamuts of any shape, and our cluster-based image representation allows the user to change colors locally.

  4. Graphics in DAQSIM

    International Nuclear Information System (INIS)

    Wang, C.C.; Booth, A.W.; Chen, Y.M.; Botlo, M.

    1993-06-01

    At the Superconducting Super Collider Laboratory (SSCL) a tool called DAQSIM has been developed to study the behavior of Data Acquisition (DAQ) systems. This paper reports and discusses the graphics used in DAQSIM. DAQSIM graphics includes graphical user interface (GUI), animation, debugging, and control facilities. DAQSIM graphics not only provides a convenient DAQ simulation environment, it also serves as an efficient manager in simulation development and verification

  5. A communication protocol for interactively controlling software tools

    NARCIS (Netherlands)

    Wulp, van der J.

    2008-01-01

    We present a protocol for interactively using software tools in a loosely coupled tool environment. Such an environment can assist the user in doing tasks that require the use of multiple tools. For example, it can invoke tools on certain input, set processing parameters, await task completion and

  6. Interactive Adjustment of Regularization in SENSE and k-t SENSE Using Commodity Graphics Hardware

    DEFF Research Database (Denmark)

    Hansen, Michael Schacht; Atkinson, David; Sørensen, Thomas Sangild

    2008-01-01

    This project demonstrates that modern commodity graphics cards (GPUs) can be used to perform fast Cartesian SENSE and k-t SENSE reconstruction. Specifically, the SENSE inversion is accelerated by up to two orders of magnitude and is no longer the time-limiting step. The achieved reconstruction...

  7. Faith-Learning Interaction in Graphic Design Courses in Protestant Evangelical Colleges and Universities

    Science.gov (United States)

    Bower, Lorraine

    2010-01-01

    Integration or connectedness between faith and learning is a core aim of Protestant evangelical colleges and universities. It is pursued in a number of different ways in the academic programs of these institutions, even in commercially oriented courses that they offer, such as graphic design. However, the different ways that practical and…

  8. AUSPEX: a graphical tool for X-ray diffraction data analysis.

    Science.gov (United States)

    Thorn, Andrea; Parkhurst, James; Emsley, Paul; Nicholls, Robert A; Vollmar, Melanie; Evans, Gwyndaf; Murshudov, Garib N

    2017-09-01

    In this paper, AUSPEX, a new software tool for experimental X-ray data analysis, is presented. Exploring the behaviour of diffraction intensities and the associated estimated uncertainties facilitates the discovery of underlying problems and can help users to improve their data acquisition and processing in order to obtain better structural models. The program enables users to inspect the distribution of observed intensities (or amplitudes) against resolution as well as the associated estimated uncertainties (sigmas). It is demonstrated how AUSPEX can be used to visually and automatically detect ice-ring artefacts in integrated X-ray diffraction data. Such artefacts can hamper structure determination, but may be difficult to identify from the raw diffraction images produced by modern pixel detectors. The analysis suggests that a significant portion of the data sets deposited in the PDB contain ice-ring artefacts. Furthermore, it is demonstrated how other problems in experimental X-ray data caused, for example, by scaling and data-conversion procedures can be detected by AUSPEX.

  9. The XChemExplorer graphical workflow tool for routine or large-scale protein-ligand structure determination.

    Science.gov (United States)

    Krojer, Tobias; Talon, Romain; Pearce, Nicholas; Collins, Patrick; Douangamath, Alice; Brandao-Neto, Jose; Dias, Alexandre; Marsden, Brian; von Delft, Frank

    2017-03-01

    XChemExplorer (XCE) is a data-management and workflow tool to support large-scale simultaneous analysis of protein-ligand complexes during structure-based ligand discovery (SBLD). The user interfaces of established crystallographic software packages such as CCP4 [Winn et al. (2011), Acta Cryst. D67, 235-242] or PHENIX [Adams et al. (2010), Acta Cryst. D66, 213-221] have entrenched the paradigm that a `project' is concerned with solving one structure. This does not hold for SBLD, where many almost identical structures need to be solved and analysed quickly in one batch of work. Functionality to track progress and annotate structures is essential. XCE provides an intuitive graphical user interface which guides the user from data processing, initial map calculation, ligand identification and refinement up until data dissemination. It provides multiple entry points depending on the need of each project, enables batch processing of multiple data sets and records metadata, progress and annotations in an SQLite database. XCE is freely available and works on any Linux and Mac OS X system, and the only dependency is to have the latest version of CCP4 installed. The design and usage of this tool are described here, and its usefulness is demonstrated in the context of fragment-screening campaigns at the Diamond Light Source. It is routinely used to analyse projects comprising 1000 data sets or more, and therefore scales well to even very large ligand-design projects.

  10. SearchSmallRNA: a graphical interface tool for the assemblage of viral genomes using small RNA libraries data.

    Science.gov (United States)

    de Andrade, Roberto R S; Vaslin, Maite F S

    2014-03-07

    Next-generation parallel sequencing (NGS) allows the identification of viral pathogens by sequencing the small RNAs of infected hosts. Thus, viral genomes may be assembled from host immune response products without prior virus enrichment, amplification or purification. However, mapping of the vast information obtained presents a bioinformatics challenge. In order to by pass the need of line command and basic bioinformatics knowledge, we develop a mapping software with a graphical interface to the assemblage of viral genomes from small RNA dataset obtained by NGS. SearchSmallRNA was developed in JAVA language version 7 using NetBeans IDE 7.1 software. The program also allows the analysis of the viral small interfering RNAs (vsRNAs) profile; providing an overview of the size distribution and other features of the vsRNAs produced in infected cells. The program performs comparisons between each read sequenced present in a library and a chosen reference genome. Reads showing Hamming distances smaller or equal to an allowed mismatched will be selected as positives and used to the assemblage of a long nucleotide genome sequence. In order to validate the software, distinct analysis using NGS dataset obtained from HIV and two plant viruses were used to reconstruct viral whole genomes. SearchSmallRNA program was able to reconstructed viral genomes using NGS of small RNA dataset with high degree of reliability so it will be a valuable tool for viruses sequencing and discovery. It is accessible and free to all research communities and has the advantage to have an easy-to-use graphical interface. SearchSmallRNA was written in Java and is freely available at http://www.microbiologia.ufrj.br/ssrna/.

  11. Building Models in the Classroom: Taking Advantage of Sophisticated Geomorphic Numerical Tools Using a Simple Graphical User Interface

    Science.gov (United States)

    Roy, S. G.; Koons, P. O.; Gerbi, C. C.; Capps, D. K.; Tucker, G. E.; Rogers, Z. A.

    2014-12-01

    Sophisticated numerical tools exist for modeling geomorphic processes and linking them to tectonic and climatic systems, but they are often seen as inaccessible for users with an exploratory level of interest. We have improved the accessibility of landscape evolution models by producing a simple graphics user interface (GUI) that takes advantage of the Channel-Hillslope Integrated Landscape Development (CHILD) model. Model access is flexible: the user can edit values for basic geomorphic, tectonic, and climate parameters, or obtain greater control by defining the spatiotemporal distributions of those parameters. Users can make educated predictions by choosing their own parametric values for the governing equations and interpreting the results immediately through model graphics. This method of modeling allows users to iteratively build their understanding through experimentation. Use of this GUI is intended for inquiry and discovery-based learning activities. We discuss a number of examples of how the GUI can be used at the upper high school, introductory university, and advanced university level. Effective teaching modules initially focus on an inquiry-based example guided by the instructor. As students become familiar with the GUI and the CHILD model, the class can shift to more student-centered exploration and experimentation. To make model interpretations more robust, digital elevation models can be imported and direct comparisons can be made between CHILD model results and natural topography. The GUI is available online through the University of Maine's Earth and Climate Sciences website, through the Community Surface Dynamics Modeling System (CSDMS) model repository, or by contacting the corresponding author.

  12. An Interactive Simulation Tool for Production Planning in Bacon Factories

    DEFF Research Database (Denmark)

    Nielsen, Jens Frederik Dalsgaard; Nielsen, Kirsten Mølgaard

    1994-01-01

    The paper describes an interactive simulation tool for production planning in bacon factories. The main aim of the tool is to make it possible to combine the production plans of all parts of the factory......The paper describes an interactive simulation tool for production planning in bacon factories. The main aim of the tool is to make it possible to combine the production plans of all parts of the factory...

  13. Engineering computer graphics in gas turbine engine design, analysis and manufacture

    Science.gov (United States)

    Lopatka, R. S.

    1975-01-01

    A time-sharing and computer graphics facility designed to provide effective interactive tools to a large number of engineering users with varied requirements was described. The application of computer graphics displays at several levels of hardware complexity and capability is discussed, with examples of graphics systems tracing gas turbine product development, beginning with preliminary design through manufacture. Highlights of an operating system stylized for interactive engineering graphics is described.

  14. An interactive graphics program to retrieve, display, compare, manipulate, curve fit, difference and cross plot wind tunnel data

    Science.gov (United States)

    Elliott, R. D.; Werner, N. M.; Baker, W. M.

    1975-01-01

    The Aerodynamic Data Analysis and Integration System (ADAIS), developed as a highly interactive computer graphics program capable of manipulating large quantities of data such that addressable elements of a data base can be called up for graphic display, compared, curve fit, stored, retrieved, differenced, etc., was described. The general nature of the system is evidenced by the fact that limited usage has already occurred with data bases consisting of thermodynamic, basic loads, and flight dynamics data. Productivity using ADAIS of five times that for conventional manual methods of wind tunnel data analysis is routinely achieved. In wind tunnel data analysis, data from one or more runs of a particular test may be called up and displayed along with data from one or more runs of a different test. Curves may be faired through the data points by any of four methods, including cubic spline and least squares polynomial fit up to seventh order.

  15. A Graphic Symbol Tool for the Evaluation of Communication, Satisfaction and Priorities of Individuals with Intellectual Disability Who Use a Speech Generating Device

    Science.gov (United States)

    Valiquette, Christine; Sutton, Ann; Ska, Bernadette

    2010-01-01

    This article reports on the views of individuals with learning disability (LD) on their use of their speech generating devices (SGDs), their satisfaction about their communication, and their priorities. The development of an interview tool made of graphic symbols and entitled Communication, Satisfaction and Priorities of SGD Users (CSPU) is…

  16. Class Evolution Tree: A Graphical Tool to Support Decisions on the Number of Classes in Exploratory Categorical Latent Variable Modeling for Rehabilitation Research

    Science.gov (United States)

    Kriston, Levente; Melchior, Hanne; Hergert, Anika; Bergelt, Corinna; Watzke, Birgit; Schulz, Holger; von Wolff, Alessa

    2011-01-01

    The aim of our study was to develop a graphical tool that can be used in addition to standard statistical criteria to support decisions on the number of classes in explorative categorical latent variable modeling for rehabilitation research. Data from two rehabilitation research projects were used. In the first study, a latent profile analysis was…

  17. GenPlay Multi-Genome, a tool to compare and analyze multiple human genomes in a graphical interface.

    Science.gov (United States)

    Lajugie, Julien; Fourel, Nicolas; Bouhassira, Eric E

    2015-01-01

    Parallel visualization of multiple individual human genomes is a complex endeavor that is rapidly gaining importance with the increasing number of personal, phased and cancer genomes that are being generated. It requires the display of variants such as SNPs, indels and structural variants that are unique to specific genomes and the introduction of multiple overlapping gaps in the reference sequence. Here, we describe GenPlay Multi-Genome, an application specifically written to visualize and analyze multiple human genomes in parallel. GenPlay Multi-Genome is ideally suited for the comparison of allele-specific expression and functional genomic data obtained from multiple phased genomes in a graphical interface with access to multiple-track operation. It also allows the analysis of data that have been aligned to custom genomes rather than to a standard reference and can be used as a variant calling format file browser and as a tool to compare different genome assembly, such as hg19 and hg38. GenPlay is available under the GNU public license (GPL-3) from http://genplay.einstein.yu.edu. The source code is available at https://github.com/JulienLajugie/GenPlay. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  18. Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

    Science.gov (United States)

    Singh, Bhupinder; Diwan, Anubhav; Jain, Varun; Herrera-Gomez, Alberto; Terry, Jeff; Linford, Matthew R.

    2016-11-01

    Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ2) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

  19. Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Singh, Bhupinder; Diwan, Anubhav; Jain, Varun; Herrera-Gomez, Alberto; Terry, Jeff; Linford, Matthew R.

    2016-01-01

    Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ 2 ) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

  20. Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Bhupinder; Diwan, Anubhav; Jain, Varun [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States); Herrera-Gomez, Alberto [CINVESTAV-Unidad Queretaro, Queretaro, 76230 (Mexico); Terry, Jeff [Department of Physics, Illinois Institute of Technology, Chicago, IL, 60616 (United States); Linford, Matthew R., E-mail: mrlinford@chem.byu.edu [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States)

    2016-11-30

    Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ{sup 2}) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

  1. IVisTMSA: Interactive Visual Tools for Multiple Sequence Alignments.

    Science.gov (United States)

    Pervez, Muhammad Tariq; Babar, Masroor Ellahi; Nadeem, Asif; Aslam, Naeem; Naveed, Nasir; Ahmad, Sarfraz; Muhammad, Shah; Qadri, Salman; Shahid, Muhammad; Hussain, Tanveer; Javed, Maryam

    2015-01-01

    IVisTMSA is a software package of seven graphical tools for multiple sequence alignments. MSApad is an editing and analysis tool. It can load 409% more data than Jalview, STRAP, CINEMA, and Base-by-Base. MSA comparator allows the user to visualize consistent and inconsistent regions of reference and test alignments of more than 21-MB size in less than 12 seconds. MSA comparator is 5,200% efficient and more than 40% efficient as compared to BALiBASE c program and FastSP, respectively. MSA reconstruction tool provides graphical user interfaces for four popular aligners and allows the user to load several sequence files at a time. FASTA generator converts seven formats of alignments of unlimited size into FASTA format in a few seconds. MSA ID calculator calculates identity matrix of more than 11,000 sequences with a sequence length of 2,696 base pairs in less than 100 seconds. Tree and Distance Matrix calculation tools generate phylogenetic tree and distance matrix, respectively, using neighbor joining% identity and BLOSUM 62 matrix.

  2. An educational tool for interactive parallel and distributed processing

    DEFF Research Database (Denmark)

    Pagliarini, Luigi; Lund, Henrik Hautop

    2012-01-01

    In this article we try to describe how the modular interactive tiles system (MITS) can be a valuable tool for introducing students to interactive parallel and distributed processing programming. This is done by providing a handson educational tool that allows a change in the representation...... of abstract problems related to designing interactive parallel and distributed systems. Indeed, the MITS seems to bring a series of goals into education, such as parallel programming, distributedness, communication protocols, master dependency, software behavioral models, adaptive interactivity, feedback......, connectivity, topology, island modeling, and user and multi-user interaction which can rarely be found in other tools. Finally, we introduce the system of modular interactive tiles as a tool for easy, fast, and flexible hands-on exploration of these issues, and through examples we show how to implement...

  3. Resurfacing Graphics

    Directory of Open Access Journals (Sweden)

    Prof. Patty K. Wongpakdee

    2013-06-01

    Full Text Available “Resurfacing Graphics” deals with the subject of unconventional design, with the purpose of engaging the viewer to experience the graphics beyond paper’s passive surface. Unconventional designs serve to reinvigorate people, whose senses are dulled by the typical, printed graphics, which bombard them each day. Today’s cutting-edge designers, illustrators and artists utilize graphics in a unique manner that allows for tactile interaction. Such works serve as valuable teaching models and encourage students to do the following: 1 investigate the trans-disciplines of art and technology; 2 appreciate that this approach can have a positive effect on the environment; 3 examine and research other approaches of design communications and 4 utilize new mediums to stretch the boundaries of artistic endeavor. This paper examines how visuals communicators are “Resurfacing Graphics” by using atypical surfaces and materials such as textile, wood, ceramics and even water. Such non-traditional transmissions of visual language serve to demonstrate student’s overreliance on paper as an outdated medium. With this exposure, students can become forward-thinking, eco-friendly, creative leaders by expanding their creative breadth and continuing the perpetual exploration for new ways to make their mark. 

  4. Resurfacing Graphics

    Directory of Open Access Journals (Sweden)

    Prof. Patty K. Wongpakdee

    2013-06-01

    Full Text Available “Resurfacing Graphics” deals with the subject of unconventional design, with the purpose of engaging the viewer to experience the graphics beyond paper’s passive surface. Unconventional designs serve to reinvigorate people, whose senses are dulled by the typical, printed graphics, which bombard them each day. Today’s cutting-edge designers, illustrators and artists utilize graphics in a unique manner that allows for tactile interaction. Such works serve as valuable teaching models and encourage students to do the following: 1 investigate the trans-disciplines of art and technology; 2 appreciate that this approach can have a positive effect on the environment; 3 examine and research other approaches of design communications and 4 utilize new mediums to stretch the boundaries of artistic endeavor. This paper examines how visuals communicators are “Resurfacing Graphics” by using atypical surfaces and materials such as textile, wood, ceramics and even water. Such non-traditional transmissions of visual language serve to demonstrate student’s overreliance on paper as an outdated medium. With this exposure, students can become forward-thinking, eco-friendly, creative leaders by expanding their creative breadth and continuing the perpetual exploration for new ways to make their mark.

  5. Graphics gems V (Macintosh version)

    CERN Document Server

    Paeth, Alan W

    1995-01-01

    Graphics Gems V is the newest volume in The Graphics Gems Series. It is intended to provide the graphics community with a set of practical tools for implementing new ideas and techniques, and to offer working solutions to real programming problems. These tools are written by a wide variety of graphics programmers from industry, academia, and research. The books in the series have become essential, time-saving tools for many programmers.Latest collection of graphics tips in The Graphics Gems Series written by the leading programmers in the field.Contains over 50 new gems displaying some of t

  6. An Educational Tool for Interactive Parallel and Distributed Processing

    DEFF Research Database (Denmark)

    Pagliarini, Luigi; Lund, Henrik Hautop

    2011-01-01

    In this paper we try to describe how the Modular Interactive Tiles System (MITS) can be a valuable tool for introducing students to interactive parallel and distributed processing programming. This is done by providing an educational hands-on tool that allows a change of representation of the abs......In this paper we try to describe how the Modular Interactive Tiles System (MITS) can be a valuable tool for introducing students to interactive parallel and distributed processing programming. This is done by providing an educational hands-on tool that allows a change of representation...... of the abstract problems related to designing interactive parallel and distributed systems. Indeed, MITS seems to bring a series of goals into the education, such as parallel programming, distributedness, communication protocols, master dependency, software behavioral models, adaptive interactivity, feedback......, connectivity, topology, island modeling, user and multiuser interaction, which can hardly be found in other tools. Finally, we introduce the system of modular interactive tiles as a tool for easy, fast, and flexible hands-on exploration of these issues, and through examples show how to implement interactive...

  7. GAIML: A New Language for Verbal and Graphical Interaction in Chatbots

    OpenAIRE

    Roberto Pirrone; Giuseppe Russo; Vincenzo Cannella; Daniele Peri

    2008-01-01

    Natural and intuitive interaction between users and complex systems is a crucial research topic in human-computer interaction. A major direction is the definition and implementation of systems with natural language understanding capabilities. The interaction in natural language is often performed by means of systems called chatbots. A chatbot is a conversational agent with a proper knowledge base able to interact with users. Chatbots appearance can be very sophisticated with 3D avatars and sp...

  8. TRX-LOGOS - a graphical tool to demonstrate DNA information content dependent upon backbone dynamics in addition to base sequence.

    Science.gov (United States)

    Fortin, Connor H; Schulze, Katharina V; Babbitt, Gregory A

    2015-01-01

    It is now widely-accepted that DNA sequences defining DNA-protein interactions functionally depend upon local biophysical features of DNA backbone that are important in defining sites of binding interaction in the genome (e.g. DNA shape, charge and intrinsic dynamics). However, these physical features of DNA polymer are not directly apparent when analyzing and viewing Shannon information content calculated at single nucleobases in a traditional sequence logo plot. Thus, sequence logos plots are severely limited in that they convey no explicit information regarding the structural dynamics of DNA backbone, a feature often critical to binding specificity. We present TRX-LOGOS, an R software package and Perl wrapper code that interfaces the JASPAR database for computational regulatory genomics. TRX-LOGOS extends the traditional sequence logo plot to include Shannon information content calculated with regard to the dinucleotide-based BI-BII conformation shifts in phosphate linkages on the DNA backbone, thereby adding a visual measure of intrinsic DNA flexibility that can be critical for many DNA-protein interactions. TRX-LOGOS is available as an R graphics module offered at both SourceForge and as a download supplement at this journal. To demonstrate the general utility of TRX logo plots, we first calculated the information content for 416 Saccharomyces cerevisiae transcription factor binding sites functionally confirmed in the Yeastract database and matched to previously published yeast genomic alignments. We discovered that flanking regions contain significantly elevated information content at phosphate linkages than can be observed at nucleobases. We also examined broader transcription factor classifications defined by the JASPAR database, and discovered that many general signatures of transcription factor binding are locally more information rich at the level of DNA backbone dynamics than nucleobase sequence. We used TRX-logos in combination with MEGA 6.0 software

  9. Interactive graphics on large datasets drives remote condition monitoring on a cloud

    International Nuclear Information System (INIS)

    Hickinbotham, Simon; Austin, James; McAvoy, John

    2012-01-01

    We demonstrate a new system for condition monitoring using the cloud. The system combines state of the art pattern search capability with youShare, a platform that allows people to run compute-intensive research in an ordered manner over the internet. Data from sensors distributed across one or more assets at one or more sites are uploaded to the cloud compute resource. The uploading triggers the deployment of a range of pattern search services, and is capable of rapidly detecting novel patterns in the data. The outputs of these processes are archived as a matter of course, but are also sent to a further service which processes the data for remote visualisation on a web browser. The system is built in Java, using GWT and RaphaelGWT for graphics rendering. The design of these systems must satisfy conflicting requirements of data currency and data throughput. We present an evaluation of our system that involves processing data at a range of frequencies and bandwidths that are commensurate with commercial requirements. We show that our system has the potential to satisfy a range of processing requirements with minimal latency, and that the user experience is easily sufficient for rapid interpretation of complex condition monitoring data.

  10. Three Dimensional Simulation of Ion Thruster Plume-Spacecraft Interaction Based on a Graphic Processor Unit

    International Nuclear Information System (INIS)

    Ren Junxue; Xie Kan; Qiu Qian; Tang Haibin; Li Juan; Tian Huabing

    2013-01-01

    Based on the three-dimensional particle-in-cell (PIC) method and Compute Unified Device Architecture (CUDA), a parallel particle simulation code combined with a graphic processor unit (GPU) has been developed for the simulation of charge-exchange (CEX) xenon ions in the plume of an ion thruster. Using the proposed technique, the potential and CEX plasma distribution are calculated for the ion thruster plume surrounding the DS1 spacecraft at different thrust levels. The simulation results are in good agreement with measured CEX ion parameters reported in literature, and the GPU's results are equal to a CPU's. Compared with a single CPU Intel Core 2 E6300, 16-processor GPU NVIDIA GeForce 9400 GT indicates a speedup factor of 3.6 when the total macro particle number is 1.1×10 6 . The simulation results also reveal how the back flow CEX plasma affects the spacecraft floating potential, which indicates that the plume of the ion thruster is indeed able to alleviate the extreme negative floating potentials of spacecraft in geosynchronous orbit

  11. The use of interactive graphical maps for browsing medical/health Internet information resources

    Directory of Open Access Journals (Sweden)

    Boulos Maged

    2003-01-01

    Full Text Available Abstract As online information portals accumulate metadata descriptions of Web resources, it becomes necessary to develop effective ways for visualising and navigating the resultant huge metadata repositories as well as the different semantic relationships and attributes of described Web resources. Graphical maps provide a good method to visualise, understand and navigate a world that is too large and complex to be seen directly like the Web. Several examples of maps designed as a navigational aid for Web resources are presented in this review with an emphasis on maps of medical and health-related resources. The latter include HealthCyberMap maps http://healthcybermap.semanticweb.org/, which can be classified as conceptual information space maps, and the very abstract and geometric Visual Net maps of PubMed http://map.net (for demos. Information resources can be also organised and navigated based on their geographic attributes. Some of the maps presented in this review use a Kohonen Self-Organising Map algorithm, and only HealthCyberMap uses a Geographic Information System to classify Web resource data and render the maps. Maps based on familiar metaphors taken from users' everyday life are much easier to understand. Associative and pictorial map icons that enable instant recognition and comprehension are preferred to geometric ones and are key to successful maps for browsing medical/health Internet information resources.

  12. Automated and interactive fuel management tools: Past, present and future

    International Nuclear Information System (INIS)

    Cook, A.G.; Casadei, A.L.

    1986-01-01

    The past, present and future status of automated and interactive fuel management tools are reviewed. Issues such as who are the customers for these products and what are their needs are addressed. The nature of the fuel management problem is reviewed. The Westinghouse fuel management tools and methods are presented as an example of how the technology has evolved

  13. Short Paper: Design Tools, Hybridization Exploring Intuitive Interaction

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kuhlen, Torsten; Coquillart, Sabine; Interrante, Victoria

    2010-01-01

    Design and Design Engineering is about making abstract representations often based on fuzzy notions, ideas or prerequisite requirements with the use of various design tools. This paper introduces an interactive hybrid design tool to assist and support singular design activity or multiple

  14. Advanced Visualization and Interactive Display Rapid Innovation and Discovery Evaluation Research Program task 8: Survey of WEBGL Graphics Engines

    Science.gov (United States)

    2015-01-01

    1 3.0 Methods, Assumptions, and Procedures ...18 4.6.3. LineUp Web... Procedures A search of the internet looking at web sites specializing in graphics, graphics engines, web browser applications, and games was conducted to

  15. NPR Lenses : Interactive Tools for Non-photorealistic Line Drawings

    NARCIS (Netherlands)

    Neumann, Petra; Isenberg, Tobias; Carpendale, Sheelagh

    2007-01-01

    NPR Lenses is an interactive technique for producing expressive non-photorealistic renderings. It provides an intuitive visual interaction tool for illustrators, allowing them to seamlessly apply a large variety of emphasis techniques. Advantages of 3D scene manipulation are combined with the

  16. Flowfield computer graphics

    Science.gov (United States)

    Desautel, Richard

    1993-01-01

    The objectives of this research include supporting the Aerothermodynamics Branch's research by developing graphical visualization tools for both the branch's adaptive grid code and flow field ray tracing code. The completed research for the reporting period includes development of a graphical user interface (GUI) and its implementation into the NAS Flowfield Analysis Software Tool kit (FAST), for both the adaptive grid code (SAGE) and the flow field ray tracing code (CISS).

  17. Specalyzer—an interactive online tool to analyze spectral reflectance measurements

    Directory of Open Access Journals (Sweden)

    Alexander Koc

    2018-06-01

    Full Text Available Low-cost phenotyping using proximal sensors is increasingly becoming popular in plant breeding. As these techniques generate a large amount of data, analysis pipelines that do not require expertise in computer programming can benefit a broader user base. In this work, a new online tool Specalyzer is presented that allows interactive analysis of the spectral reflectance data generated by proximal spectroradiometers. Specalyzer can be operated from any web browser allowing data uploading, analysis, interactive plots and exporting by point and click using a simple graphical user interface. Specalyzer is evaluated with case study data from a winter wheat fertilizer trial with two fertilizer treatments. Specalyzer can be accessed online at http://www.specalyzer.org.

  18. Development of Stand Alone Application Tool for Processing and Quality Measurement of Weld Imperfection Image Captured by μ-Focused Digital Radiography Using MATLAB- Based Graphical User Interface

    Directory of Open Access Journals (Sweden)

    PZ Nadila

    2012-12-01

    Full Text Available Digital radiography incresingly is being applied in the fabrication industry. Compared to film- based radiography, digitally radiographed images can be acquired with less time and fewer exposures. However, noises can simply occur on the digital image resulting in a low-quality result. Due to this and the system’s complexity, parameters’ sensitivity, and environmental effects, the results can be difficult to interpret, even for a radiographer. Therefore, the need of an application tool to improve and evaluate the image is becoming urgent. In this research, a user-friendly tool for image processing and image quality measurement was developed. The resulting tool contains important components needed by radiograph inspectors in analyzing defects and recording the results. This tool was written by using image processing and the graphical user interface development environment and compiler (GUIDE toolbox available in Matrix Laboratory (MATLAB R2008a. In image processing methods, contrast adjustment, and noise removal, edge detection was applied. In image quality measurement methods, mean square error (MSE, peak signal-to-noise ratio (PSNR, modulation transfer function (MTF, normalized signal-to-noise ratio (SNRnorm, sensitivity and unsharpness were used to measure the image quality. The graphical user interface (GUI wass then compiled to build a Windows, stand-alone application that enables this tool to be executed independently without the installation of MATLAB.

  19. Graphical Presentation of Patient-Treatment Interaction Elucidated by Continuous Biomarkers. Current Practice and Scope for Improvement.

    Science.gov (United States)

    Shen, Yu-Ming; Le, Lien D; Wilson, Rory; Mansmann, Ulrich

    2017-01-09

    Biomarkers providing evidence for patient-treatment interaction are key in the development and practice of personalized medicine. Knowledge that a patient with a specific feature - as demonstrated through a biomarker - would have an advantage under a given treatment vs. a competing treatment can aid immensely in medical decision-making. Statistical strategies to establish evidence of continuous biomarkers are complex and their formal results are thus not easy to communicate. Good graphical representations would help to translate such findings for use in the clinical community. Although general guidelines on how to present figures in clinical reports are available, there remains little guidance for figures elucidating the role of continuous biomarkers in patient-treatment interaction (CBPTI). To combat the current lack of comprehensive reviews or adequate guides on graphical presentation within this topic, our study proposes presentation principles for CBPTI plots. In order to understand current practice, we review the development of CBPTI methodology and how CBPTI plots are currently used in clinical research. The quality of a CBPTI plot is determined by how well the presentation provides key information for clinical decision-making. Several criteria for a good CBPTI plot are proposed, including general principles of visual display, use of units presenting absolute outcome measures, appropriate quantification of statistical uncertainty, correct display of benchmarks, and informative content for answering clinical questions especially on the quantitative advantage for an individual patient with regard to a specific treatment. We examined the development of CBPTI methodology from the years 2000 - 2014, and reviewed how CBPTI plots were currently used in clinical research in six major clinical journals from 2013 - 2014 using the principle of theoretical saturation. Each CBPTI plot found was assessed for appropriateness of its presentation and clinical utility

  20. THREE-DIMENSIONAL MODELING TOOLS IN THE PROCESS OF FORMATION OF GRAPHIC COMPETENCE OF THE FUTURE BACHELOR OF COMPUTER SCIENCE

    Directory of Open Access Journals (Sweden)

    Kateryna P. Osadcha

    2017-12-01

    Full Text Available The article is devoted to some aspects of the formation of future bachelor's graphic competence in computer sciences while teaching the fundamentals for working with three-dimensional modelling means. The analysis, classification and systematization of three-dimensional modelling means are given. The aim of research consists in investigating the set of instruments and classification of three-dimensional modelling means and correlation of skills, which are being formed, concerning inquired ones at the labour market in order to use them further in the process of forming graphic competence during training future bachelors in computer sciences. The peculiarities of the process of forming future bachelor's graphic competence in computer sciences by means of revealing, analyzing and systematizing three-dimensional modelling means and types of three-dimensional graphics at present stage of the development of informational technologies are traced a line round. The result of the research is a soft-ware choice in three-dimensional modelling for the process of training future bachelors in computer sciences.

  1. R graphics

    CERN Document Server

    Murrell, Paul

    2005-01-01

    R is revolutionizing the world of statistical computing. Powerful, flexible, and best of all free, R is now the program of choice for tens of thousands of statisticians. Destined to become an instant classic, R Graphics presents the first complete, authoritative exposition on the R graphical system. Paul Murrell, widely known as the leading expert on R graphics, has developed an in-depth resource that takes nothing for granted and helps both neophyte and seasoned users master the intricacies of R graphics. After an introductory overview of R graphics facilities, the presentation first focuses

  2. iVCJ: A tool for Interactive Visualization of high explosives CJ states

    Energy Technology Data Exchange (ETDEWEB)

    Wooten, Hasani Omar [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Aslam, Tariq Dennis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Whitley, Von Howard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-12

    A graphical user interface (GUI) tool has been developed that facilitates the visualization and analysis of the Chapman-Jouguet state for high explosives gaseous products using the Jones- Wilkins-Lee equation of state.

  3. COREMAP - Graphical User Interface for displaying reactor core data in an interactive hexagonal map

    International Nuclear Information System (INIS)

    Muscat, F.L.; Derstine, K.L.

    1995-01-01

    COREMAP displays reactor core data from multidimensional neutronic simulation models in color and/or as text in an interactive 2D planar grid of hexagonal subassemblies. The interactive (point and click) interface enables the user to access multi data set files (e.g.. planes, moments, energy groups, ...) and to display up to two data sets simultaneously, one as text and the other as color. The user (1) controls color scale characteristics (linear or logarithmic) with a variety of range limits, (2) chooses zoom features (map size, ring number and surrounding subassemblies), (3) is supplied with popup sub-windows to display data from planes and energy groups currently offscreen for the selected cell. Three color scale shading techniques may be used to display data on any bitmapped screen monitor. Most effective displays are obtained with shades of blue and red on color monitors, shades of grey on greyscale monitors or stipple patterns on monochrome monitors. A fully automated printing option creates high quality PostScript color or greyscale images of the core map independent of the monitor used, e.g. color prints can be generated with a session from a monochrome monitor

  4. eRNA: a graphic user interface-based tool optimized for large data analysis from high-throughput RNA sequencing.

    Science.gov (United States)

    Yuan, Tiezheng; Huang, Xiaoyi; Dittmar, Rachel L; Du, Meijun; Kohli, Manish; Boardman, Lisa; Thibodeau, Stephen N; Wang, Liang

    2014-03-05

    RNA sequencing (RNA-seq) is emerging as a critical approach in biological research. However, its high-throughput advantage is significantly limited by the capacity of bioinformatics tools. The research community urgently needs user-friendly tools to efficiently analyze the complicated data generated by high throughput sequencers. We developed a standalone tool with graphic user interface (GUI)-based analytic modules, known as eRNA. The capacity of performing parallel processing and sample management facilitates large data analyses by maximizing hardware usage and freeing users from tediously handling sequencing data. The module miRNA identification" includes GUIs for raw data reading, adapter removal, sequence alignment, and read counting. The module "mRNA identification" includes GUIs for reference sequences, genome mapping, transcript assembling, and differential expression. The module "Target screening" provides expression profiling analyses and graphic visualization. The module "Self-testing" offers the directory setups, sample management, and a check for third-party package dependency. Integration of other GUIs including Bowtie, miRDeep2, and miRspring extend the program's functionality. eRNA focuses on the common tools required for the mapping and quantification analysis of miRNA-seq and mRNA-seq data. The software package provides an additional choice for scientists who require a user-friendly computing environment and high-throughput capacity for large data analysis. eRNA is available for free download at https://sourceforge.net/projects/erna/?source=directory.

  5. Anvil Forecast Tool in the Advanced Weather Interactive Processing System (AWIPS)

    Science.gov (United States)

    Barrett, Joe H., III; Hood, Doris

    2009-01-01

    Launch Weather Officers (LWOs) from the 45th Weather Squadron (45 WS) and forecasters from the National Weather Service (NWS) Spaceflight Meteorology Group (SMG) have identified anvil forecasting as one of their most challenging tasks when predicting the probability of violating the Lightning Launch Commit Criteria (LLCC) (Krider et al. 2006; Space Shuttle Flight Rules (FR), NASA/JSC 2004)). As a result, the Applied Meteorology Unit (AMU) developed a tool that creates an anvil threat corridor graphic that can be overlaid on satellite imagery using the Meteorological Interactive Data Display System (MIDDS, Short and Wheeler, 2002). The tool helps forecasters estimate the locations of thunderstorm anvils at one, two, and three hours into the future. It has been used extensively in launch and landing operations by both the 45 WS and SMG. The Advanced Weather Interactive Processing System (AWIPS) is now used along with MIDDS for weather analysis and display at SMG. In Phase I of this task, SMG tasked the AMU to transition the tool from MIDDS to AWIPS (Barrett et aI., 2007). For Phase II, SMG requested the AMU make the Anvil Forecast Tool in AWIPS more configurable by creating the capability to read model gridded data from user-defined model files instead of hard-coded files. An NWS local AWIPS application called AGRID was used to accomplish this. In addition, SMG needed to be able to define the pressure levels for the model data, instead of hard-coding the bottom level as 300 mb and the top level as 150 mb. This paper describes the initial development of the Anvil Forecast Tool for MIDDS, followed by the migration of the tool to AWIPS in Phase I. It then gives a detailed presentation of the Phase II improvements to the AWIPS tool.

  6. Interactive computer graphics displays for hierarchical data structures. [Description of THESGRAF, in FORTRAN IV for CDC and IBM computers

    Energy Technology Data Exchange (ETDEWEB)

    Cahn, D.F.; Murano, C.V.

    1980-05-01

    An interactive computer graphical display program was developed as an aid to user visualization and manipulation of hierarchically structured data systems such as thesauri. In the present configuration, a thesaurus term and its primary and secondary conceptual neighbors are presented to the user in tree graph form on a CRT; the user then designates, via light pen or keyboard, any of the neighbors as the next term of interest and receives a new display centered on this term. By successive specification of broader, narrower, and related terms, the user can course rapidly through the thesaurus space and refine his search file. At any stage, he deals with a term-centered, conceptually meaningful picture of a localized portion of the thesaurus, and is freed from the artificial difficulties of handling the traditional alphabetized thesaurus. Intentional limitation of the associative range of each display frame, and the use of color, case, and interconnecting vectors to encode relationships among terms, enhance interpretability of the display. Facile movement through the term space, provided by interactive computation, allows the display to remain simple, and is an essential element of the system. 3 figures.

  7. GURU v2.0: An interactive Graphical User interface to fit rheometer curves in Han's model for rubber vulcanization

    Science.gov (United States)

    Milani, G.; Milani, F.

    A GUI software (GURU) for experimental data fitting of rheometer curves in Natural Rubber (NR) vulcanized with sulphur at different curing temperatures is presented. Experimental data are automatically loaded in GURU from an Excel spreadsheet coming from the output of the experimental machine (moving die rheometer). To fit the experimental data, the general reaction scheme proposed by Han and co-workers for NR vulcanized with sulphur is considered. From the simplified kinetic scheme adopted, a closed form solution can be found for the crosslink density, with the only limitation that the induction period is excluded from computations. Three kinetic constants must be determined in such a way to minimize the absolute error between normalized experimental data and numerical prediction. Usually, this result is achieved by means of standard least-squares data fitting. On the contrary, GURU works interactively by means of a Graphical User Interface (GUI) to minimize the error and allows an interactive calibration of the kinetic constants by means of sliders. A simple mouse click on the sliders allows the assignment of a value for each kinetic constant and a visual comparison between numerical and experimental curves. Users will thus find optimal values of the constants by means of a classic trial and error strategy. An experimental case of technical relevance is shown as benchmark.

  8. An Interactive Tool for Creating Multi-Agent Systems and Interactive Agent-based Games

    DEFF Research Database (Denmark)

    Lund, Henrik Hautop; Pagliarini, Luigi

    2011-01-01

    Utilizing principles from parallel and distributed processing combined with inspiration from modular robotics, we developed the modular interactive tiles. As an educational tool, the modular interactive tiles facilitate the learning of multi-agent systems and interactive agent-based games...

  9. Graphics Gems III IBM version

    CERN Document Server

    Kirk, David

    1994-01-01

    This sequel to Graphics Gems (Academic Press, 1990), and Graphics Gems II (Academic Press, 1991) is a practical collection of computer graphics programming tools and techniques. Graphics Gems III contains a larger percentage of gems related to modeling and rendering, particularly lighting and shading. This new edition also covers image processing, numerical and programming techniques, modeling and transformations, 2D and 3D geometry and algorithms,ray tracing and radiosity, rendering, and more clever new tools and tricks for graphics programming. Volume III also includes a

  10. Development of a Planet Tool for an interactive School Atlas as eBook

    Science.gov (United States)

    Wondrak, Stephan

    2018-05-01

    The present thesis describes the development of a planet tool for an interactive school atlas using an eBook format. Especially the technical and cartographical capabilities of the open standard ePUB 3 are evaluated. An eBook application with interactive and dynamic 2-dimensional visualizations is developed especially to show whether the re-al-world dimensions and distances in the solar system can be mapped in a cartographical correct and for students easy understandable manner. In the first part of the work, the requirements of the planet tool are evaluated in co-operation with experts. The open standards PDF and ePUB 3 are investigated with regard to the requirements for the development of the planet tool. Another chapter describes in detail all significant steps of the development process for a prototype of the planet tool. A graphic file originally created for print production is prepared and enhanced with interactive features to generate one of the eBook pages. This serves to show a potential workflow for the generation of eBook pages in a cross-media atlas production. All sample pages of the prototype show different layouts and contain the entire spectrum of interactive features and multimedia content of modern eBooks. The sample pages are presented and discussed in an own chapter. The results of the present work aim at answering the question concerning the suitability of the open standard ePUB 3 for the development of a multimedia eBook for high school education.

  11. Telehealth in Schools Using a Systematic Educational Model Based on Fiction Screenplays, Interactive Documentaries, and Three-Dimensional Computer Graphics.

    Science.gov (United States)

    Miranda, Diogo Julien; Chao, Lung Wen

    2018-03-01

    Preliminary studies suggest the need of a global vision in academic reform, leading to education re-invention. This would include problem-based education using transversal topics, developing of thinking skills, social interaction, and information-processing skills. We aimed to develop a new educational model in health with modular components to be broadcast and applied as a tele-education course. We developed a systematic model based on a "Skills and Goals Matrix" to adapt scientific contents on fictional screenplays, three-dimensional (3D) computer graphics of the human body, and interactive documentaries. We selected 13 topics based on youth vulnerabilities in Brazil to be disseminated through a television show with 15 episodes. We developed scientific content for each theme, naturally inserting it into screenplays, together with 3D sequences and interactive documentaries. The modular structure was then adapted to a distance-learning course. The television show was broadcast on national television for two consecutive years to an estimated audience of 30 million homes, and ever since on an Internet Protocol Television (IPTV) channel. It was also reorganized as a tele-education course for 2 years, reaching 1,180 subscriptions from all 27 Brazilian states, resulting in 240 graduates. Positive results indicate the feasibility, acceptability, and effectiveness of a model of modular entertainment audio-visual productions using health and education integrated concepts. This structure also allowed the model to be interconnected with other sources and applied as tele-education course, educating, informing, and stimulating the behavior change. Future works should reinforce this joint structure of telehealth, communication, and education.

  12. SU-E-T-595: Design of a Graphical User Interface for An In-House Monte Carlo Based Treatment Planning System: Planning and Contouring Tools

    International Nuclear Information System (INIS)

    EMAM, M; Eldib, A; Lin, M; Li, J; Chibani, O; Ma, C

    2014-01-01

    Purpose: An in-house Monte Carlo based treatment planning system (MC TPS) has been developed for modulated electron radiation therapy (MERT). Our preliminary MERT planning experience called for a more user friendly graphical user interface. The current work aimed to design graphical windows and tools to facilitate the contouring and planning process. Methods: Our In-house GUI MC TPS is built on a set of EGS4 user codes namely MCPLAN and MCBEAM in addition to an in-house optimization code, which was named as MCOPTIM. Patient virtual phantom is constructed using the tomographic images in DICOM format exported from clinical treatment planning systems (TPS). Treatment target volumes and critical structures were usually contoured on clinical TPS and then sent as a structure set file. In our GUI program we developed a visualization tool to allow the planner to visualize the DICOM images and delineate the various structures. We implemented an option in our code for automatic contouring of the patient body and lungs. We also created an interface window displaying a three dimensional representation of the target and also showing a graphical representation of the treatment beams. Results: The new GUI features helped streamline the planning process. The implemented contouring option eliminated the need for performing this step on clinical TPS. The auto detection option for contouring the outer patient body and lungs was tested on patient CTs and it was shown to be accurate as compared to that of clinical TPS. The three dimensional representation of the target and the beams allows better selection of the gantry, collimator and couch angles. Conclusion: An in-house GUI program has been developed for more efficient MERT planning. The application of aiding tools implemented in the program is time saving and gives better control of the planning process

  13. Microarray Я US: a user-friendly graphical interface to Bioconductor tools that enables accurate microarray data analysis and expedites comprehensive functional analysis of microarray results.

    Science.gov (United States)

    Dai, Yilin; Guo, Ling; Li, Meng; Chen, Yi-Bu

    2012-06-08

    Microarray data analysis presents a significant challenge to researchers who are unable to use the powerful Bioconductor and its numerous tools due to their lack of knowledge of R language. Among the few existing software programs that offer a graphic user interface to Bioconductor packages, none have implemented a comprehensive strategy to address the accuracy and reliability issue of microarray data analysis due to the well known probe design problems associated with many widely used microarray chips. There is also a lack of tools that would expedite the functional analysis of microarray results. We present Microarray Я US, an R-based graphical user interface that implements over a dozen popular Bioconductor packages to offer researchers a streamlined workflow for routine differential microarray expression data analysis without the need to learn R language. In order to enable a more accurate analysis and interpretation of microarray data, we incorporated the latest custom probe re-definition and re-annotation for Affymetrix and Illumina chips. A versatile microarray results output utility tool was also implemented for easy and fast generation of input files for over 20 of the most widely used functional analysis software programs. Coupled with a well-designed user interface, Microarray Я US leverages cutting edge Bioconductor packages for researchers with no knowledge in R language. It also enables a more reliable and accurate microarray data analysis and expedites downstream functional analysis of microarray results.

  14. The Effectiveness of Using Interactive Multimedia Based on Motion Graphic in Concept Mastering Enhancement and Fashion Designing Skill in Digital Format

    Directory of Open Access Journals (Sweden)

    Winwin Wiana

    2018-02-01

    Full Text Available This research is related to the effort to design a more representative learning system to improve the learning result of digital fashion design, through the development of interactive multimedia based on motion graphic. This research is aimed to know the effect of interactive multimedia application based on motion graphic to increase the mastery of the concept and skill of the students to making fashion designing in digital format. The research method used is quasi experiment with research design of Nonequivalent Control Group Design. The lectures are conducted in two different classes, namely class A as the Experimental Class and class B as the Control Class. From the calculation result after interpreted using Normalize Gain, there is an increase of higher learning result in student with interactive learning based on motion graphic, compared with student achievement on conventional learning. In this research, interactive multimedia learning based on motion graphic is effective toward the improvement of student learning in concept mastering indicator and on the aspect of making fashion design in digital format.

  15. Interactive exploratory data analysis tool in Alzheimer’s disease

    Directory of Open Access Journals (Sweden)

    Diana Furcila

    2015-04-01

    Thus, MorExAn provide us the possibility to relate histopathological data with neuropsychological and clinical variables. The aid of this interactive visualization tool brings us the possibility to find unexpected conclusions beyond the insight provided by simple statistics analysis, as well as to improve neuroscientists’ productivity.

  16. Improving Critical Thinking with Interactive Mobile Tools and Apps

    Science.gov (United States)

    Lin, Lin; Widdall, Chris; Ward, Laurie

    2014-01-01

    In this article, the authors describe how integrating interactive mobile tools into elementary pedagogy can generate enthusiasm and critical thinking among students as they learn about the world. The activities described took place over the course of six one-hour periods spanning six days. These activities address three major social studies…

  17. Illustrated Plant Identification Keys: An Interactive Tool to Learn Botany

    Science.gov (United States)

    Silva, Helena; Pinho, Rosa; Lopes, Lisia; Nogueira, Antonio J. A.; Silveira, Paulo

    2011-01-01

    An Interactive Dichotomous Key (IDK) for 390 "taxa" of vascular plants from the Ria de Aveiro, available on a website, was developed to help teach botany to school and universitary students. This multimedia tool includes several links to Descriptive and Illustrated Glossaries. Questionnaires answered by high-school and undergraduate students about…

  18. Interactive test tool for interoperable C-ITS development

    NARCIS (Netherlands)

    Voronov, A.; Englund, C.; Bengtsson, H.H.; Chen, L.; Ploeg, J.; Jongh, J.F.C.M. de; Sluis, H.J.D. van de

    2015-01-01

    This paper presents the architecture of an Interactive Test Tool (ITT) for interoperability testing of Cooperative Intelligent Transport Systems (C-ITS). Cooperative systems are developed by different manufacturers at different locations, which makes interoperability testing a tedious task. Up until

  19. The Design of Tools for Sketching Sensor-Based Interaction

    DEFF Research Database (Denmark)

    Brynskov, Martin; Lunding, Rasmus; Vestergaard, Lasse Steenbock

    2012-01-01

    , flexibility and cost, aimed at wearable and ultra-mobile prototyping where fast reaction is needed (e.g. in controlling sound), and we discuss the general issues facing this category of embodied interaction design tools. We then present the platform in more detail, both regarding hard- ware and software...

  20. An interactive, web-based tool for genealogical entity resolution

    NARCIS (Netherlands)

    Efremova, I.; Ranjbar-Sahraei, B.; Oliehoek, F.A.; Calders, T.G.K.; Tuyls, K.P.

    2013-01-01

    We demonstrate an interactive, web-based tool which helps historians to do Genealogical Entitiy Resolution. This work has two main goals. First, it uses Machine Learning (ML) algorithms to assist humanites researchers to perform Genealogical Entity Resolution. Second, it facilitates the generation

  1. Application of the opportunities of tool system 'CUDA' for graphic processors programming in scientific and technical calculation tasks

    International Nuclear Information System (INIS)

    Dudnik, V.A.; Kudryavtsev, V.I.; Sereda, T.M.; Us, S.A.; Shestakov, M.V.

    2009-01-01

    The opportunities of technology CUDA (Compute Unified Device Architecture - the unified hardware-software decision for parallel calculations on GPU)of the company NVIDIA were described. The basic differences of the programming language 'C' for GPU from 'usual' language 'C' were selected. The examples of CUDA usage for acceleration of development of applications and realization of algorithms of scientific and technical calculations were given which are carried out by the means of graphic processors (GPGPU) of accelerators GeForce of the eighth generation. The recommendations on optimization of the programs using GPU were resulted.

  2. The Design of Tools for Sketching Sensor-Based Interaction

    DEFF Research Database (Denmark)

    Brynskov, Martin; Lunding, Rasmus; Vestergaard, Lasse Steenbock

    2012-01-01

    In this paper we motivate, present, and give an initial evaluation of DUL Radio, a small wireless toolkit for sketching sensor-based interaction. In the motivation, we discuss the purpose of this specific platform, which aims to balance ease-of-use (learning, setup, initialization), size, speed......, flexibility and cost, aimed at wearable and ultra-mobile prototyping where fast reaction is needed (e.g. in controlling sound), and we discuss the general issues facing this category of embodied interaction design tools. We then present the platform in more detail, both regarding hard- ware and software....... In the brief evaluation, we present our initial experiences with the platform both in design projects and in teaching. We conclude that DUL Radio does seem to be a relatively easy-to-use tool for sketching sensor-based interaction compared to other solutions, but that there are many ways to improve it. Target...

  3. Graphical Interfaces for Simulation.

    Science.gov (United States)

    Hollan, J. D.; And Others

    This document presents a discussion of the development of a set of software tools to assist in the construction of interfaces to simulations and real-time systems. Presuppositions to the approach to interface design that was used are surveyed, the tools are described, and the conclusions drawn from these experiences in graphical interface design…

  4. 'Tagger' - a Mac OS X Interactive Graphical Application for Data Inference and Analysis of N-Dimensional Datasets in the Natural Physical Sciences.

    Science.gov (United States)

    Morse, P. E.; Reading, A. M.; Lueg, C.

    2014-12-01

    Pattern-recognition in scientific data is not only a computational problem but a human-observer problem as well. Human observation of - and interaction with - data visualization software can augment, select, interrupt and modify computational routines and facilitate processes of pattern and significant feature recognition for subsequent human analysis, machine learning, expert and artificial intelligence systems.'Tagger' is a Mac OS X interactive data visualisation tool that facilitates Human-Computer interaction for the recognition of patterns and significant structures. It is a graphical application developed using the Quartz Composer framework. 'Tagger' follows a Model-View-Controller (MVC) software architecture: the application problem domain (the model) is to facilitate novel ways of abstractly representing data to a human interlocutor, presenting these via different viewer modalities (e.g. chart representations, particle systems, parametric geometry) to the user (View) and enabling interaction with the data (Controller) via a variety of Human Interface Devices (HID). The software enables the user to create an arbitrary array of tags that may be appended to the visualised data, which are then saved into output files as forms of semantic metadata. Three fundamental problems that are not strongly supported by conventional scientific visualisation software are addressed:1] How to visually animate data over time, 2] How to rapidly deploy unconventional parametrically driven data visualisations, 3] How to construct and explore novel interaction models that capture the activity of the end-user as semantic metadata that can be used to computationally enhance subsequent interrogation. Saved tagged data files may be loaded into Tagger, so that tags may be tagged, if desired. Recursion opens up the possibility of refining or overlapping different types of tags, tagging a variety of different POIs or types of events, and of capturing different types of specialist

  5. Graphic Storytelling

    Science.gov (United States)

    Thompson, John

    2009-01-01

    Graphic storytelling is a medium that allows students to make and share stories, while developing their art communication skills. American comics today are more varied in genre, approach, and audience than ever before. When considering the impact of Japanese manga on the youth, graphic storytelling emerges as a powerful player in pop culture. In…

  6. [Infobarris: an interactive tool to monitor and disseminate information on health and its determinants in the neighbourhoods of Barcelona (Spain)].

    Science.gov (United States)

    Llimona, Pere; Pérez, Glòria; Rodríguez-Sanz, Maica; Novoa, Ana M; Espelt, Albert; García de Olalla, Patricia; Borrell, Carme

    In order to know about the health of the population, it is necessary to perform a systematic and continuous analysis of their health status and social and economic health determinants. The objective of this paper is to describe the development and implementation of the Infobarris tool, which allows to visualize a wide battery of indicators and social determinants of health by neighbourhoods in the city of Barcelona (Spain). For the development of the Infobarris tool, we used an agile methodology that allows the development of a project in iterative and incremental stages, which are the following: selection of indicators, design of the prototype, development of the tool, data loading, and tool review and improvements. Infobarris displays 64 indicators of health and its determinants through graphics, maps and tables, in a friendly, interactive and attractive way, which facilitates health surveillance in the neighbourhoods of Barcelona. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  7. GESearch: An Interactive GUI Tool for Identifying Gene Expression Signature

    Directory of Open Access Journals (Sweden)

    Ning Ye

    2015-01-01

    Full Text Available The huge amount of gene expression data generated by microarray and next-generation sequencing technologies present challenges to exploit their biological meanings. When searching for the coexpression genes, the data mining process is largely affected by selection of algorithms. Thus, it is highly desirable to provide multiple options of algorithms in the user-friendly analytical toolkit to explore the gene expression signatures. For this purpose, we developed GESearch, an interactive graphical user interface (GUI toolkit, which is written in MATLAB and supports a variety of gene expression data files. This analytical toolkit provides four models, including the mean, the regression, the delegate, and the ensemble models, to identify the coexpression genes, and enables the users to filter data and to select gene expression patterns by browsing the display window or by importing knowledge-based genes. Subsequently, the utility of this analytical toolkit is demonstrated by analyzing two sets of real-life microarray datasets from cell-cycle experiments. Overall, we have developed an interactive GUI toolkit that allows for choosing multiple algorithms for analyzing the gene expression signatures.

  8. ABISM: an interactive image quality assessment tool for adaptive optics instruments

    Science.gov (United States)

    Girard, Julien H.; Tourneboeuf, Martin

    2016-07-01

    ABISM (Automatic Background Interactive Strehl Meter) is a interactive tool to evaluate the image quality of astronomical images. It works on seeing-limited point spread functions (PSF) but was developed in particular for diffraction-limited PSF produced by adaptive optics (AO) systems. In the VLT service mode (SM) operations framework, ABISM is designed to help support astronomers or telescope and instruments operators (TIOs) to quickly measure the Strehl ratio (SR) during or right after an observing block (OB) to evaluate whether it meets the requirements/predictions or whether is has to be repeated and will remain in the SM queue. It's a Python-based tool with a graphical user interface (GUI) that can be used with little AO knowledge. The night astronomer (NA) or Telescope and Instrument Operator (TIO) can launch ABISM in one click and the program is able to read keywords from the FITS header to avoid mistakes. A significant effort was also put to make ABISM as robust (and forgiven) with a high rate of repeatability. As a matter of fact, ABISM is able to automatically correct for bad pixels, eliminate stellar neighbours and estimate/fit properly the background, etc.

  9. Exploration of Metagenome Assemblies with an Interactive Visualization Tool

    Energy Technology Data Exchange (ETDEWEB)

    Cantor, Michael; Nordberg, Henrik; Smirnova, Tatyana; Andersen, Evan; Tringe, Susannah; Hess, Matthias; Dubchak, Inna

    2014-07-09

    Metagenomics, one of the fastest growing areas of modern genomic science, is the genetic profiling of the entire community of microbial organisms present in an environmental sample. Elviz is a web-based tool for the interactive exploration of metagenome assemblies. Elviz can be used with publicly available data sets from the Joint Genome Institute or with custom user-loaded assemblies. Elviz is available at genome.jgi.doe.gov/viz

  10. Communication Styles of Interactive Tools for Self-Improvement

    OpenAIRE

    Niess, Jasmin; Diefenbach, Sarah

    2016-01-01

    Background Interactive products for self-improvement (e.g., online trainings to reduce stress, fitness gadgets) have become increasingly popular among consumers and healthcare providers. In line with the idea of positive computing, these tools aim to support their users on their way to improved well-being and human flourishing. As an interdisciplinary domain, the design of self-improvement technologies requires psychological, technological, and design expertise. One needs to know how to suppo...

  11. Loop-driven graphical unitary group approach to the electron correlation problem, including configuration interaction energy gradients

    International Nuclear Information System (INIS)

    Brooks, B.R.

    1979-09-01

    The Graphical Unitary Group Approach (GUGA) was cast into an extraordinarily powerful form by restructuring the Hamiltonian in terms of loop types. This restructuring allows the adoption of the loop-driven formulation which illuminates vast numbers of previously unappreciated relationships between otherwise distinct Hamiltonian matrix elements. The theoretical/methodological contributions made here include the development of the loop-driven formula generation algorithm, a solution of the upper walk problem used to develop a loop breakdown algorithm, the restriction of configuration space employed to the multireference interacting space, and the restructuring of the Hamiltonian in terms of loop types. Several other developments are presented and discussed. Among these developments are the use of new segment coefficients, improvements in the loop-driven algorithm, implicit generation of loops wholly within the external space adapted within the framework of the loop-driven methodology, and comparisons of the diagonalization tape method to the direct method. It is also shown how it is possible to implement the GUGA method without the time-consuming full (m 5 ) four-index transformation. A particularly promising new direction presented here involves the use of the GUGA methodology to obtain one-electron and two-electron density matrices. Once these are known, analytical gradients (first derivatives) of the CI potential energy are easily obtained. Several test calculations are examined in detail to illustrate the unique features of the method. Also included is a calculation on the asymmetric 2 1 A' state of SO 2 with 23,613 configurations to demonstrate methods for the diagonalization of very large matrices on a minicomputer. 6 figures, 6 tables

  12. A sophisticated cad tool for the creation of complex models for electromagnetic interaction analysis

    Science.gov (United States)

    Dion, Marc; Kashyap, Satish; Louie, Aloisius

    1991-06-01

    This report describes the essential features of the MS-DOS version of DIDEC-DREO, an interactive program for creating wire grid, surface patch, and cell models of complex structures for electromagnetic interaction analysis. It uses the device-independent graphics library DIGRAF and the graphics kernel system HALO, and can be executed on systems with various graphics devices. Complicated structures can be created by direct alphanumeric keyboard entry, digitization of blueprints, conversion form existing geometric structure files, and merging of simple geometric shapes. A completed DIDEC geometric file may then be converted to the format required for input to a variety of time domain and frequency domain electromagnetic interaction codes. This report gives a detailed description of the program DIDEC-DREO, its installation, and its theoretical background. Each available interactive command is described. The associated program HEDRON which generates simple geometric shapes, and other programs that extract the current amplitude data from electromagnetic interaction code outputs, are also discussed.

  13. Graphic notation

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    1992-01-01

    Texbook to be used along with training the practise of graphic notation. Describes method; exercises; bibliography; collection of examples. If you can read Danish, please refer to that edition which is by far much more updated.......Texbook to be used along with training the practise of graphic notation. Describes method; exercises; bibliography; collection of examples. If you can read Danish, please refer to that edition which is by far much more updated....

  14. Sequence Similarity Presenter: a tool for the graphic display of similarities of long sequences for use in presentations.

    Science.gov (United States)

    Fröhlich, K U

    1994-04-01

    A new method for the presentation of alignments of long sequences is described. The degree of identity for the aligned sequences is averaged for sections of a fixed number of residues. The resulting values are converted to shades of gray, with white corresponding to lack of identity and black corresponding to perfect identity. A sequence alignment is represented as a bar filled with varying shades of gray. The display is compact and allows for a fast and intuitive recognition of the distribution of regions with a high similarity. It is well suited for the presentation of alignments of long sequences, e.g. of protein superfamilies, in plenary lectures. The method is implemented as a HyperCard stack for Apple Macintosh computers. Several options for the modification of the output are available (e.g. background reduction, size of the summation window, consideration of amino acid similarity, inclusion of graphic markers to indicate specific domains). The output is a PostScript file which can be printed, imported as EPS or processed further with Adobe Illustrator.

  15. A tool for monitoring lecturers’ interactions with Learning Management Systems

    Directory of Open Access Journals (Sweden)

    Magdalena Cantabella

    2016-12-01

    Full Text Available Learning Management Systems’ (LMS interaction mechanisms are mainly focused on the improvement of students’ experiences and academic results. However, special attention should also be given to the interaction between these LMS and other actors involved in the educational process. This paper specifically targets the interaction of degree coordinators with LMS when monitoring lecturers’ performance, especially in an online mode. The methodology is guided by the following three objectives: (1 analysis of the limitations of monitoring lecturers in current LMS; (2 development of software program to overcome such limitations; and (3 empirical evaluation of the proposed program. The results show that this type of tool helps coordinators to intuitively and efficiently analyze the status of the subjects taught in their degree programs.

  16. Culvert Analysis Program Graphical User Interface 1.0--A preprocessing and postprocessing tool for estimating flow through culvert

    Science.gov (United States)

    Bradley, D. Nathan

    2013-01-01

    The peak discharge of a flood can be estimated from the elevation of high-water marks near the inlet and outlet of a culvert after the flood has occurred. This type of discharge estimate is called an “indirect measurement” because it relies on evidence left behind by the flood, such as high-water marks on trees or buildings. When combined with the cross-sectional geometry of the channel upstream from the culvert and the culvert size, shape, roughness, and orientation, the high-water marks define a water-surface profile that can be used to estimate the peak discharge by using the methods described by Bodhaine (1968). This type of measurement is in contrast to a “direct” measurement of discharge made during the flood where cross-sectional area is measured and a current meter or acoustic equipment is used to measure the water velocity. When a direct discharge measurement cannot be made at a streamgage during high flows because of logistics or safety reasons, an indirect measurement of a peak discharge is useful for defining the high-flow section of the stage-discharge relation (rating curve) at the streamgage, resulting in more accurate computation of high flows. The Culvert Analysis Program (CAP) (Fulford, 1998) is a command-line program written in Fortran for computing peak discharges and culvert rating surfaces or curves. CAP reads input data from a formatted text file and prints results to another formatted text file. Preparing and correctly formatting the input file may be time-consuming and prone to errors. This document describes the CAP graphical user interface (GUI)—a modern, cross-platform, menu-driven application that prepares the CAP input file, executes the program, and helps the user interpret the output

  17. Graphics tablet technology in second year thermal engineering teaching

    Directory of Open Access Journals (Sweden)

    Antonio Carrillo Andrés

    2013-12-01

    Full Text Available Graphics tablet technology is well known in markets such as manufacturing, graphics arts and design but they have not yet found widespread acceptance for university teaching. A graphics tablet is an affordable and efficient teaching tool that combines the best features from traditional and new media. It allows developing a progressive, interactive lecture (as a traditional blackboard does. However, the tablet is more versatile, being able to integrate graphic material such as tables, graphs, colours, etc. In addition to that, lecture notes can be saved and posted on a course website. The objective of this paper is to show the usefulness of tablet technology in undergraduate engineering teaching by sharing experiences made using a graphics tablet for lecturing a second year Thermal Engineering course. Students’ feedback is definitely positive, though there are some caveats regarding technical and operative problems.

  18. Recent developments in MrBUMP: better search-model preparation, graphical interaction with search models, and solution improvement and assessment.

    Science.gov (United States)

    Keegan, Ronan M; McNicholas, Stuart J; Thomas, Jens M H; Simpkin, Adam J; Simkovic, Felix; Uski, Ville; Ballard, Charles C; Winn, Martyn D; Wilson, Keith S; Rigden, Daniel J

    2018-03-01

    Increasing sophistication in molecular-replacement (MR) software and the rapid expansion of the PDB in recent years have allowed the technique to become the dominant method for determining the phases of a target structure in macromolecular X-ray crystallography. In addition, improvements in bioinformatic techniques for finding suitable homologous structures for use as MR search models, combined with developments in refinement and model-building techniques, have pushed the applicability of MR to lower sequence identities and made weak MR solutions more amenable to refinement and improvement. MrBUMP is a CCP4 pipeline which automates all stages of the MR procedure. Its scope covers everything from the sourcing and preparation of suitable search models right through to rebuilding of the positioned search model. Recent improvements to the pipeline include the adoption of more sensitive bioinformatic tools for sourcing search models, enhanced model-preparation techniques including better ensembling of homologues, and the use of phase improvement and model building on the resulting solution. The pipeline has also been deployed as an online service through CCP4 online, which allows its users to exploit large bioinformatic databases and coarse-grained parallelism to speed up the determination of a possible solution. Finally, the molecular-graphics application CCP4mg has been combined with MrBUMP to provide an interactive visual aid to the user during the process of selecting and manipulating search models for use in MR. Here, these developments in MrBUMP are described with a case study to explore how some of the enhancements to the pipeline and to CCP4mg can help to solve a difficult case.

  19. Tools For Interactive Learning And Self-Management Of Diabetes

    Science.gov (United States)

    Capelo, Rita; Baptista, Carla; Figueiredo, Júlia; Carrilho, Francisco; Furtado, Pedro

    2015-05-01

    Diabetes is a widespread disease and its control is dependent upon the patient. Although there is no permanent cure for diabetes, there are several available treatments which, when followed regularly, allow the patient to have a good quality of life. Patient education, especially about eating habits, is key to keep glucose levels stable both in the short and in the long term. This should include nutritional counselling, physical exercise, and the self monitoring of glucose levels. The University of Coimbra and the Serviço de Endocrinologia, Diabetes e Metabolismo of Centro Hospitalar e Universitário de Coimbra started a collaboration to develop interactive tools for the learning and improvement of carbohydrate counting by patients. The approach presented in this paper is an interactive multimedia tool, available to patients through either the web or a smartphone. It helps them to learn how to maintain a healthy diet and how to monitor their insulin levels correctly by measuring the carbo-hidrate “equivalents” in meals. This application will create a more dynamic and interactive way of educating patients, improving solutions currently used in the Serviço de Endocrinologia, Diabetes e Metabolismo of the Centro Hospitalar e Universitário de Coimbra.

  20. Perception in statistical graphics

    Science.gov (United States)

    VanderPlas, Susan Ruth

    There has been quite a bit of research on statistical graphics and visualization, generally focused on new types of graphics, new software to create graphics, interactivity, and usability studies. Our ability to interpret and use statistical graphics hinges on the interface between the graph itself and the brain that perceives and interprets it, and there is substantially less research on the interplay between graph, eye, brain, and mind than is sufficient to understand the nature of these relationships. The goal of the work presented here is to further explore the interplay between a static graph, the translation of that graph from paper to mental representation (the journey from eye to brain), and the mental processes that operate on that graph once it is transferred into memory (mind). Understanding the perception of statistical graphics should allow researchers to create more effective graphs which produce fewer distortions and viewer errors while reducing the cognitive load necessary to understand the information presented in the graph. Taken together, these experiments should lay a foundation for exploring the perception of statistical graphics. There has been considerable research into the accuracy of numerical judgments viewers make from graphs, and these studies are useful, but it is more effective to understand how errors in these judgments occur so that the root cause of the error can be addressed directly. Understanding how visual reasoning relates to the ability to make judgments from graphs allows us to tailor graphics to particular target audiences. In addition, understanding the hierarchy of salient features in statistical graphics allows us to clearly communicate the important message from data or statistical models by constructing graphics which are designed specifically for the perceptual system.

  1. Communication Styles of Interactive Tools for Self-Improvement.

    Science.gov (United States)

    Niess, Jasmin; Diefenbach, Sarah

    Interactive products for self-improvement (e.g., online trainings to reduce stress, fitness gadgets) have become increasingly popular among consumers and healthcare providers. In line with the idea of positive computing, these tools aim to support their users on their way to improved well-being and human flourishing. As an interdisciplinary domain, the design of self-improvement technologies requires psychological, technological, and design expertise. One needs to know how to support people in behavior change, and one needs to find ways to do this through technology design. However, as recent reviews show, the interlocking relationship between these disciplines is still improvable. Many existing technologies for self-improvement neglect psychological theory on behavior change, especially motivational factors are not sufficiently considered. To counteract this, we suggest a focus on the dialog and emerging communication between product and user, considering the self-improvement tool as an interactive coach and advisor. The present qualitative interview study (N = 18) explored the user experience of self-improvement technologies. A special focus was on the perceived dialog between tool and user, which we analyzed in terms of models from communication psychology. Our findings show that users are sensible to the way the product "speaks to them" and consider this as essential for their experience and successful change. Analysis revealed different communication styles of self-improvement tools (e.g., helpful-cooperative, rational-distanced, critical-aggressive), each linked to specific emotional consequences. These findings form one starting point for a more psychologically founded design of self-improvement technology. On a more general level, our approach aims to contribute to a better integration of psychological and technological knowledge, and in consequence, supporting users on their way to enhanced well-being.

  2. The National Shipbuilding Research Program, Proceedings of the REAPS Technical Symposium Paper No. 9: SPADE Interactive Graphics at Avondale

    National Research Council Canada - National Science Library

    Cali, Filippo

    1976-01-01

    .... One of the major considerations was to have total interchangeability between the graphic and the batch mode of the System such that rework could be processed easily, whether the original work had been done through the ̀CRT' or in batch...

  3. Interactive model evaluation tool based on IPython notebook

    Science.gov (United States)

    Balemans, Sophie; Van Hoey, Stijn; Nopens, Ingmar; Seuntjes, Piet

    2015-04-01

    In hydrological modelling, some kind of parameter optimization is mostly performed. This can be the selection of a single best parameter set, a split in behavioural and non-behavioural parameter sets based on a selected threshold or a posterior parameter distribution derived with a formal Bayesian approach. The selection of the criterion to measure the goodness of fit (likelihood or any objective function) is an essential step in all of these methodologies and will affect the final selected parameter subset. Moreover, the discriminative power of the objective function is also dependent from the time period used. In practice, the optimization process is an iterative procedure. As such, in the course of the modelling process, an increasing amount of simulations is performed. However, the information carried by these simulation outputs is not always fully exploited. In this respect, we developed and present an interactive environment that enables the user to intuitively evaluate the model performance. The aim is to explore the parameter space graphically and to visualize the impact of the selected objective function on model behaviour. First, a set of model simulation results is loaded along with the corresponding parameter sets and a data set of the same variable as the model outcome (mostly discharge). The ranges of the loaded parameter sets define the parameter space. A selection of the two parameters visualised can be made by the user. Furthermore, an objective function and a time period of interest need to be selected. Based on this information, a two-dimensional parameter response surface is created, which actually just shows a scatter plot of the parameter combinations and assigns a color scale corresponding with the goodness of fit of each parameter combination. Finally, a slider is available to change the color mapping of the points. Actually, the slider provides a threshold to exclude non behaviour parameter sets and the color scale is only attributed to the

  4. Visualization and interaction tools for aerial photograph mosaics

    Science.gov (United States)

    Fernandes, João Pedro; Fonseca, Alexandra; Pereira, Luís; Faria, Adriano; Figueira, Helder; Henriques, Inês; Garção, Rita; Câmara, António

    1997-05-01

    This paper describes the development of a digital spatial library based on mosaics of digital orthophotos, called Interactive Portugal, that will enable users both to retrieve geospatial information existing in the Portuguese National System for Geographic Information World Wide Web server, and to develop local databases connected to the main system. A set of navigation, interaction, and visualization tools are proposed and discussed. They include sketching, dynamic sketching, and navigation capabilities over the digital orthophotos mosaics. Main applications of this digital spatial library are pointed out and discussed, namely for education, professional, and tourism markets. Future developments are considered. These developments are related to user reactions, technological advancements, and projects that also aim at delivering and exploring digital imagery on the World Wide Web. Future capabilities for site selection and change detection are also considered.

  5. Printer Graphics Package

    Science.gov (United States)

    Blanchard, D. C.

    1986-01-01

    Printer Graphics Package (PGP) is tool for making two-dimensional symbolic plots on line printer. PGP created to support development of Heads-Up Display (HUD) simulation. Standard symbols defined with HUD in mind. Available symbols include circle, triangle, quadrangle, window, line, numbers, and text. Additional symbols easily added or built up from available symbols.

  6. Graphic Ecologies

    Directory of Open Access Journals (Sweden)

    Brook Weld Muller

    2014-12-01

    Full Text Available This essay describes strategic approaches to graphic representation associated with critical environmental engagement and that build from the idea of works of architecture as stitches in the ecological fabric of the city. It focuses on the building up of partial or fragmented graphics in order to describe inclusive, open-ended possibilities for making architecture that marry rich experience and responsive performance. An aphoristic approach to crafting drawings involves complex layering, conscious absence and the embracing of tension. A self-critical attitude toward the generation of imagery characterized by the notion of ‘loose precision’ may lead to more transformative and environmentally responsive architectures.

  7. Graphics gems

    CERN Document Server

    Heckbert, Paul S

    1994-01-01

    Graphics Gems IV contains practical techniques for 2D and 3D modeling, animation, rendering, and image processing. The book presents articles on polygons and polyhedral; a mix of formulas, optimized algorithms, and tutorial information on the geometry of 2D, 3D, and n-D space; transformations; and parametric curves and surfaces. The text also includes articles on ray tracing; shading 3D models; and frame buffer techniques. Articles on image processing; algorithms for graphical layout; basic interpolation methods; and subroutine libraries for vector and matrix algebra are also demonstrated. Com

  8. Development of a graphical user interface allowing use of the SASSYS LMR systems analysis code as an EBR-II interactive simulator

    International Nuclear Information System (INIS)

    Garner, P.L.; Briggs, L.L.; Gross, K.C.; Ku, J.Y.; Staffon, J.D.

    1994-01-01

    The SASSYS computer program for safety analyses of liquid-metal- cooled fast reactors has been adapted for use as the simulation engine under the graphical user interface provided by the GRAFUN and HIST programs and the Data Views software package under the X Window System on UNIX-based computer workstations to provide a high fidelity, real-time, interactive simulator of the Experimental Breeder Reactor Number II (EBR-II) plant. In addition to providing analysts with an interactive way of performing safety case studies, the simulator can be used to investigate new control room technologies and to supplement current operator training

  9. 3D for Graphic Designers

    CERN Document Server

    Connell, Ellery

    2011-01-01

    Helping graphic designers expand their 2D skills into the 3D space The trend in graphic design is towards 3D, with the demand for motion graphics, animation, photorealism, and interactivity rapidly increasing. And with the meteoric rise of iPads, smartphones, and other interactive devices, the design landscape is changing faster than ever.2D digital artists who need a quick and efficient way to join this brave new world will want 3D for Graphic Designers. Readers get hands-on basic training in working in the 3D space, including product design, industrial design and visualization, modeling, ani

  10. Process Machine Interactions Predicition and Manipulation of Interactions between Manufacturing Processes and Machine Tool Structures

    CERN Document Server

    Hollmann, Ferdinand

    2013-01-01

    This contributed volume collects the scientific results of the DFG Priority Program 1180 Prediction and Manipulation of Interactions between Structure and Process. The research program has been conducted during the years 2005 and 2012, whereas the primary goal was the analysis of the interactions between processes and structures in modern production facilities. This book presents the findings of the 20 interdisciplinary subprojects, focusing on different manufacturing processes such as high performance milling, tool grinding or metal forming. It contains experimental investigations as well as mathematical modeling of production processes and machine interactions. New experimental advancements and novel simulation approaches are also included.

  11. Interactive software tool to comprehend the calculation of optimal sequence alignments with dynamic programming.

    Science.gov (United States)

    Ibarra, Ignacio L; Melo, Francisco

    2010-07-01

    Dynamic programming (DP) is a general optimization strategy that is successfully used across various disciplines of science. In bioinformatics, it is widely applied in calculating the optimal alignment between pairs of protein or DNA sequences. These alignments form the basis of new, verifiable biological hypothesis. Despite its importance, there are no interactive tools available for training and education on understanding the DP algorithm. Here, we introduce an interactive computer application with a graphical interface, for the purpose of educating students about DP. The program displays the DP scoring matrix and the resulting optimal alignment(s), while allowing the user to modify key parameters such as the values in the similarity matrix, the sequence alignment algorithm version and the gap opening/extension penalties. We hope that this software will be useful to teachers and students of bioinformatics courses, as well as researchers who implement the DP algorithm for diverse applications. The software is freely available at: http:/melolab.org/sat. The software is written in the Java computer language, thus it runs on all major platforms and operating systems including Windows, Mac OS X and LINUX. All inquiries or comments about this software should be directed to Francisco Melo at fmelo@bio.puc.cl.

  12. SMARTScience Tools: Interacting With Blazar Data In The Web Browser

    Science.gov (United States)

    Hasan, Imran; Isler, Jedidah; Urry, C. Megan; MacPherson, Emily; Buxton, Michelle; Bailyn, Charles D.; Coppi, Paolo S.

    2014-08-01

    The Yale-SMARTS blazar group has accumulated 6 years of optical-IR photometry of more than 70 blazars, mostly bright enough in gamma-rays to be detected with Fermi. Observations were done with the ANDICAM instrument on the SMARTS 1.3 m telescope at the Cerro Tololo Inter-American Observatory. As a result of this long-term, multiwavelength monitoring, we have produced a calibrated, publicly available data set (see www.astro.yale.edu/smarts/glast/home.php), which we have used to find that (i) optical-IR and gamma-ray light curves are well correlated, supporting inverse-Compton models for gamma-ray production (Bonning et al. 2009, 2012), (ii) at their brightest, blazar jets can contribute significantly to the photoionization of the broad-emission-line region, indicating that gamma-rays are produced within 0.1 pc of the black hole in at least some cases (Isler et al. 2014), and (iii) optical-IR and gamma-ray flares are symmetric, implying the time scales are dominated by light-travel-time effects rather than acceleration or cooling (Chatterjee et al. 2012). The volume of data and diversity of projects for which it is used calls out for an efficient means of visualization. To this end, we have developed a suite of visualization tools called SMARTScience Tools, which allow users to interact dynamically with our dataset. The SMARTScience Tools is publicly available via our webpage and can be used to customize multiwavelength light curves and color magnitude diagrams quickly and intuitively. Users can choose specific bands to construct plots, and the plots include features such as band-by-band panning, dynamic zooming, and direct mouse interaction with individual data points. Human and machine readable tables of the plotted data can be directly printed for the user's convenience and for further independent study. The SMARTScience Tools significantly improves the public’s ability to interact with the Yale-SMARTS 6-year data base of blazar photometry, and should make

  13. Graphic notation

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2010-01-01

    Graphic notation is taught to music therapy students at Aalborg University in both simple and elaborate forms. This is a method of depicting music visually, and notations may serve as memory aids, as aids for analysis and reflection, and for communication purposes such as supervision or within...

  14. Hierarchical data structures for graphics program languages

    International Nuclear Information System (INIS)

    Gonauser, M.; Schinner, P.; Weiss, J.

    1978-01-01

    Graphic data processing with a computer makes exacting demands on the interactive capability of the program language and the management of the graphic data. A description of the structure of a graphics program language which has been shown by initial practical experiments to possess a particularly favorable interactive capability is followed by the evaluation of various data structures (list, tree, ring) with respect to their interactive capability in processing graphics. A practical structure is proposed. (orig.) [de

  15. Education System Using Interactive 3D Computer Graphics (3D-CG) Animation and Scenario Language for Teaching Materials

    Science.gov (United States)

    Matsuda, Hiroshi; Shindo, Yoshiaki

    2006-01-01

    The 3D computer graphics (3D-CG) animation using a virtual actor's speaking is very effective as an educational medium. But it takes a long time to produce a 3D-CG animation. To reduce the cost of producing 3D-CG educational contents and improve the capability of the education system, we have developed a new education system using Virtual Actor.…

  16. Interaction Matrices as a Tool for Prioritizing Radioecology Research

    Energy Technology Data Exchange (ETDEWEB)

    Mora, J.C.; Robles, Beatriz [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas - CIEMAT (Spain); Bradshaw, Clare; Stark, Karolina [Stockholm University (Sweden); Sweeck, Liev; Vives i Batlle, Jordi [Belgian Nuclear Research Centre SCK-CEN (Belgium); Beresford, Nick [Centre for Ecology and Hydrology - CEH (United Kingdom); Thoerring, Havard; Dowdall, Mark [Norwegian Radiation Protection Authority - NRPA (Norway); Outola, Iisa; Turtiainen, Tuukka; Vetikko, Virve [STUK - Radiation and Nuclear Safety Authority (Finland); Steiner, Martin [Federal Office for Radiation Protection - BfS (Germany); Beaugelin-Seiller, Karine; Fevrier, Laureline; Hurtevent, Pierre; Boyer, Patrick [Institut de Radioprotection et de Surete Nucleaire - IRSN (France)

    2014-07-01

    Interaction Matrices as a Tool for Prioritizing Radioecology Research J.C. Mora CIEMAT In 2010 the Strategy for Allied Radioecology (STAR) was launched with several objectives aimed towards integrating the radioecology research efforts of nine institutions in Europe. One of these objectives was the creation of European Radioecology Observatories. The Chernobyl Exclusion Zone (CEZ) and the Upper Silesian Coal Basin (USCB), a coal mining area in Poland, have been chosen after a selection process. A second objective was to develop a system for improving and validating the capabilities of predicting the behaviour of the main radionuclides existing at these observatories. Interaction Matrices (IM) have been used since the 1990's as a tool for developing ecological conceptual models and have also been used within radioecology. The Interaction Matrix system relies on expert judgement for structuring knowledge of a given ecosystem at the conceptual level and was selected for use in the STAR project. A group of experts, selected from each institution of STAR, designed two matrices with the main compartments for each ecosystem (a forest in CEZ and a lake in USCB). All the features, events and processes (FEPs) which could affect the behaviour of the considered radionuclides, focusing on radiocaesium in the Chernobyl forest and radium in the Rontok-Wielki lake, were also included in each IM. Two new sets of experts were appointed to review, improve and prioritize the processes included in each IM. A first processing of the various candidate interaction matrices produced a single interaction matrix for each ecosystem which incorporated all experts combined knowledge. During the prioritization of processes in the IMs, directed towards developing a whole predictive model of radionuclides behaviour in those ecosystems, raised interesting issues related to the processes and parameters involved, regarding the existing knowledge in them. This exercise revealed several processes

  17. Practical training in the operation of nuclear power plants with Interactive Graphic Simulator of Zorita; Formacion practica en la operacion de centrales nucleares con el Simulador Grafico Interactivo de Zorita

    Energy Technology Data Exchange (ETDEWEB)

    Cuervo, D.; Garcia-Herranz, N.; Garcia, S.; Davila, R.; Ahnert, C.; Aragones, J. M.; Cabellos, O.; Gallego, E.; Lorente, A.; Minguez, E.; Rebollo, L.; Blanco, J.

    2010-07-01

    In April 2008 a collaboration agreement was signed between Gas Natural Union Fenosa and the Universad Politecnica de Madrid for the creation of the Aula Jose Cabrera dedicated to train professionals in the field of nuclear technology. The Classroom located in the Department of Nuclear Engineering, has been equipped with the Interactive Graphic Simulator of Zorita (SGIZ). The use of the simulator intended to improve the quality of teaching in the area of Nuclear Engineering. It integrates in the teachings of Industrial Engineering degree and the Master of Nuclear Science and Technology. Different manuals are under preparation to make it a suitable tool for teaching purpose. These manuals will guide the student so that learning takes place both through the guidance of the teacher as independently. (Author) 3 refs.

  18. The use of interpractive graphic displays for interpretation of surface design parameters

    Science.gov (United States)

    Talcott, N. A., Jr.

    1981-01-01

    An interactive computer graphics technique known as the Graphic Display Data method has been developed to provide a convenient means for rapidly interpreting large amounts of surface design data. The display technique should prove valuable in such disciplines as aerodynamic analysis, structural analysis, and experimental data analysis. To demonstrate the system's features, an example is presented of the Graphic Data Display method used as an interpretive tool for radiation equilibrium temperature distributions over the surface of an aerodynamic vehicle. Color graphic displays were also examined as a logical extension of the technique to improve its clarity and to allow the presentation of greater detail in a single display.

  19. Introduction to regression graphics

    CERN Document Server

    Cook, R Dennis

    2009-01-01

    Covers the use of dynamic and interactive computer graphics in linear regression analysis, focusing on analytical graphics. Features new techniques like plot rotation. The authors have composed their own regression code, using Xlisp-Stat language called R-code, which is a nearly complete system for linear regression analysis and can be utilized as the main computer program in a linear regression course. The accompanying disks, for both Macintosh and Windows computers, contain the R-code and Xlisp-Stat. An Instructor's Manual presenting detailed solutions to all the problems in the book is ava

  20. Interactive 3D geodesign tool for multidisciplinary wind turbine planning.

    Science.gov (United States)

    Rafiee, Azarakhsh; Van der Male, Pim; Dias, Eduardo; Scholten, Henk

    2018-01-01

    Wind turbine site planning is a multidisciplinary task comprising of several stakeholder groups from different domains and with different priorities. An information system capable of integrating the knowledge on the multiple aspects of a wind turbine plays a crucial role on providing a common picture to the involved groups. In this study, we have developed an interactive and intuitive 3D system (Falcon) for planning wind turbine locations. This system supports iterative design loops (wind turbine configurations), based on the emerging field of geodesign. The integration of GIS, game engine and the analytical models has resulted in an interactive platform with real-time feedback on the multiple wind turbine aspects which performs efficiently for different use cases and different environmental settings. The implementation of tiling techniques and open standard web services support flexible and on-the-fly loading and querying of different (massive) geospatial elements from different resources. This boosts data accessibility and interoperability that are of high importance in a multidisciplinary process. The incorporation of the analytical models in Falcon makes this system independent from external tools for different environmental impacts estimations and results in a unified platform for performing different environmental analysis in every stage of the scenario design. Game engine techniques, such as collision detection, are applied in Falcon for the real-time implementation of different environmental models (e.g. noise and visibility). The interactivity and real-time performance of Falcon in any location in the whole country assist the stakeholders in the seamless exploration of various scenarios and their resulting environmental effects and provides a scope for an interwoven discussion process. The flexible architecture of the system enables the effortless application of Falcon in other countries, conditional to input data availability. The embedded open web

  1. Aqueduct: an interactive tool to empower global water risk assessment

    Science.gov (United States)

    Reig, Paul; Gassert, Francis

    2013-04-01

    The Aqueduct Water Risk Atlas (Aqueduct) is a publicly available, global database and interactive tool that maps indicators of water related risks for decision makers worldwide. Aqueduct makes use of the latest geo-statistical modeling techniques to compute a composite index and translate the most recently available hydrological data into practical information on water related risks for companies, investors, and governments alike. Twelve global indicators are grouped into a Water Risk Framework designed in response to the growing concerns from private sector actors around water scarcity, water quality, climate change, and increasing demand for freshwater. The Aqueduct framework includes indicators of water stress, variability in supply, storage, flood, drought, groundwater, water quality and social conflict, addressing both spatial and temporal variation in water hazards. It organizes indicators into three categories of risk that bring together multiple dimensions of water related risk into comprehensive aggregated scores, which allow for dynamic weighting to capture users' unique exposure to water hazards. All information is compiled into an online, open access platform, from which decision-makers can view indicators, scores, and maps, conduct global risk assessments, and export data and shape files for further analysis. Companies can use this tool to evaluate their exposure to water risks across operations and supply chains, investors to assess water-related risks in their portfolio, and public-sector actors to better understand water security. Additionally, the open nature of the data and maps allow other organizations to build off of this effort with new research, for example in the areas of water-energy or water-food relationships. This presentation will showcase the Aqueduct Water Risk Atlas online tool and the features and functionalities it offers, as well as explain how it can be used for both private and public sector applications. The session will

  2. A database and tool, IM Browser, for exploring and integrating emerging gene and protein interaction data for Drosophila

    Directory of Open Access Journals (Sweden)

    Parrish Jodi R

    2006-04-01

    Full Text Available Abstract Background Biological processes are mediated by networks of interacting genes and proteins. Efforts to map and understand these networks are resulting in the proliferation of interaction data derived from both experimental and computational techniques for a number of organisms. The volume of this data combined with the variety of specific forms it can take has created a need for comprehensive databases that include all of the available data sets, and for exploration tools to facilitate data integration and analysis. One powerful paradigm for the navigation and analysis of interaction data is an interaction graph or map that represents proteins or genes as nodes linked by interactions. Several programs have been developed for graphical representation and analysis of interaction data, yet there remains a need for alternative programs that can provide casual users with rapid easy access to many existing and emerging data sets. Description Here we describe a comprehensive database of Drosophila gene and protein interactions collected from a variety of sources, including low and high throughput screens, genetic interactions, and computational predictions. We also present a program for exploring multiple interaction data sets and for combining data from different sources. The program, referred to as the Interaction Map (IM Browser, is a web-based application for searching and visualizing interaction data stored in a relational database system. Use of the application requires no downloads and minimal user configuration or training, thereby enabling rapid initial access to interaction data. IM Browser was designed to readily accommodate and integrate new types of interaction data as it becomes available. Moreover, all information associated with interaction measurements or predictions and the genes or proteins involved are accessible to the user. This allows combined searches and analyses based on either common or technique-specific attributes

  3. An interactive beam-weight optimization tool for three-dimensional radiotherapy treatment planning

    International Nuclear Information System (INIS)

    Burba, S.; Gardey, K.; Nadobny, J.; Stalling, D.; Seebass, M.; Beier, J.; Wust, P.; Budach, V.; Felix, R.

    1997-01-01

    Purpose: A computer software tool has been developed to aid the treatment planner in selecting beam weights for three-dimensional radiotherapy treatment planning. An approach to plan optimization has been made that is based on the use of an iterative feasibility search algorithm combined with a quadratic convergence method that seeks a set of beam weights which satisfies all the dose constraints set by the planner. Materials and Methods: A FORTRAN module for dose calculation for radiotherapy (a VOXELPLAN modification) has been integrated into an object-oriented Silicon Graphics TM platform in an IRIS Inventor environment on basis of the OpenGL which up to now has been exclusively used for the calculation of E-field distributions in hyperthermia (HyperPlan TM ). After the successful calculation and representation of the dose distribution in the Silicon Graphics TM platform, an algorithm involving the minimization method according to the principle of quadratic convergence was developed for optimizing beam weights of a number of pre-calculated fields. The verification of the algorithms for dose calculation and dose optimization has been realized by use of a standardized interface to the program VIRTUOS as well as by the collapsed cone algorithm implemented in the commercial treatment planning system Helax TMS TM . Results: The search algorithm allows the planner to incorporate relative importance weightings to target volumes and anatomical structures, specifying, for example, that a dose constraint to the spinal cord is much more crucial to the overall evaluation of a treatment plan than a dose constraint to otherwise uninvolved soft tissue. In most cases the applied minimization method according to the model of Davidon-Fletcher-Powell showed ultimate fast convergence for a general function f(x) with continuous second derivatives and fast convergence for a positive definite quadratic function. In other cases, however, the absence of an acceptable solution may indicate

  4. Computer graphics from basic to application

    International Nuclear Information System (INIS)

    Kim, Do Hyeong; Mun, Sung Min

    1998-04-01

    This book mentions conception of computer graphics, background history, necessity and applied field like construction design, image processing, auto mobile design, fashion design and TV broadcast, basic principle of computer, computer graphics hardware, computer graphics software such as adobe illustrator tool box and adobe photo shop, quarkXpress like introduction, application and operating circumstance, 3D graphics with summary, difference of versions of 3D studio and system, and Auto CAD application.

  5. Computer graphics from basic to application

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Do Hyeong; Mun, Sung Min

    1998-04-15

    This book mentions conception of computer graphics, background history, necessity and applied field like construction design, image processing, auto mobile design, fashion design and TV broadcast, basic principle of computer, computer graphics hardware, computer graphics software such as adobe illustrator tool box and adobe photo shop, quarkXpress like introduction, application and operating circumstance, 3D graphics with summary, difference of versions of 3D studio and system, and Auto CAD application.

  6. Balancing risk and benefit for first-line treatment of metastatic colorectal cancer: a graphic communication tool for patients and physicians.

    Science.gov (United States)

    Sanatani, Michael S; Vincent, Mark D

    2007-01-01

    Advances in the treatment of metastatic colorectal cancer have improved overall survival (OS); however, this might come at the cost of increased toxicity. Health-related quality of life, a significant concern closely related to toxicity and important when discussing palliative therapy, is infrequently assessed and reported in older clinical trials. As the number of tested regimens increases, the question arises on how to best present palliative treatment options. We present a simple way to compare treatment options in terms of potential risks and benefits. The literature was surveyed for reports of first-line systemic chemotherapies for metastatic colorectal cancer. The largest recent reports with detailed toxicity data were selected as representative for a regimen. Toxicity sum of a regimen was calculated as percent occurrences in the study cohort of severe adverse effects: diarrhea, mucositis, neurocutaneous conditions (excluding alopecia), vomiting, and febrile neutropenia. Limitations of toxicity reporting precluded inclusion of other or milder adverse events. Benefits (OS and progression-free survival [PFS]) were plotted graphically as benefit versus toxicity sum. Thirty-four regimens were found. Overall survival, PFS, and toxicity sum ranged from 8.9-24.7 months, 4.9-9.2 months, and 12-70 months, respectively. Weaknesses of our study include omission of some specific toxicities and of symptom control benefit, as well as heterogeneity of trial design and study populations. Furthermore, more recent OS data might reflect the availability of more lines of therapy rather than the effect of the first-line regimen, as comparison with PFS outcomes show. Our comparative tool helps physicians discuss the large number of available options with a patient in order to arrive at the treatment plan most appropriate to the individual and improve informed consent and disclosure, while highlighting limitations in available evidence.

  7. SOSPEX, an interactive tool to explore SOFIA spectral cubes

    Science.gov (United States)

    Fadda, Dario; Chambers, Edward T.

    2018-01-01

    We present SOSPEX (SOFIA SPectral EXplorer), an interactive tool to visualize and analyze spectral cubes obtained with the FIFI-LS and GREAT instruments onboard the SOFIA Infrared Observatory. This software package is written in Python 3 and it is available either through Github or Anaconda.Through this GUI it is possible to explore directly the spectral cubes produced by the SOFIA pipeline and archived in the SOFIA Science Archive. Spectral cubes are visualized showing their spatial and spectral dimensions in two different windows. By selecting a part of the spectrum, the flux from the corresponding slice of the cube is visualized in the spatial window. On the other hand, it is possible to define apertures on the spatial window to show the corresponding spectral energy distribution in the spectral window.Flux isocontours can be overlapped to external images in the spatial window while line names, atmospheric transmission, or external spectra can be overplotted on the spectral window. Atmospheric models with specific parameters can be retrieved, compared to the spectra and applied to the uncorrected FIFI-LS cubes in the cases where the standard values give unsatisfactory results. Subcubes can be selected and saved as FITS files by cropping or cutting the original cubes. Lines and continuum can be fitted in the spectral window saving the results in Jyson files which can be reloaded later. Finally, in the case of spatially extended observations, it is possible to compute spectral momenta as a function of the position to obtain velocity dispersion maps or velocity diagrams.

  8. Circus Venomous: an interactive tool for toxinology education.

    Science.gov (United States)

    Vohra, Rais; Spano, Susanne

    2013-07-01

    Clinical education about envenomations and their treatment may convey clinical and zoological details inadequately or flatly. In recent years, the widespread availability of models and videos of venomous species have created unique opportunities for toxinology education. We share our experiences using a new toolkit for educating a diverse array of clinicians, students, and wilderness medicine enthusiasts. We examined the cost, number of participants, and satisfaction data since the initiation of a portable workshop featuring high-fidelity exhibits of venomous species. Termed the "Circus Venomous," this educational toolkit consists of several boxes of props, such as plastic models, photos, and preserved specimens of injurious species. The workshop consists of three phases: 1.) participants view all exhibits and answer clinical questions regarding venomous injuries; 2.) short video clips from television, internet, and cinema are viewed together, and myths about envenomation injuries are debunked; 3.) debriefing session and wrap-up. We have utilized the Circus Venomous to teach medical students, residents, practicing community clinicians, nurses, PAs, national and regional parkmedics, and wilderness enthusiasts. The major cost (about $800) was spent on the purchase of highly durable, lifelike models and well preserved real reptile and arachnid specimens. When formal feedback was solicited, the participants expressed high levels of satisfaction, scoring an average of 4.3, 4.4, and 4.3 out of 5 points in the respective areas of content, presentation, and practical value of the activity. Since we have used this exhibit with approximately 250 participants over 2 years, we estimate the materials cost per participant is approximately $3. The Circus Venomous is a novel, interactive, flexible, and cost-effective teaching tool about envenomation emergencies. We hope that this concept will encourage other clinical educators toward further innovation. Future directions for our

  9. Application Design Of Interactive Multimedia Development Based Motion Graphic On Making Fashion Design Learning In Digital Format

    OpenAIRE

    Winwin Wiana

    2017-01-01

    This study is a research and development aimed at developing multimedia interactive learning based animation as an effort to improve student learning motivation in learning Fashion Design Technology apart from this study also aims to design a learning program courses Fashion Design Technology with a focus on optimizing the use of interactive media in learning process. From this study showed 1 A preliminary study found that the problems faced by students when studying Fashion Design Technology...

  10. JMFA2—a graphically interactive Java program that fits microfibril angle X-ray diffraction data

    Science.gov (United States)

    Steve P. Verrill; David E. Kretschmann; Victoria L. Herian

    2006-01-01

    X-ray diffraction techniques have the potential to decrease the time required to determine microfibril angles dramatically. In this paper, we discuss the latest version of a curve-fitting toll that permits us to reduce the time required to evaluate MFA X-ray diffraction patterns. Further, because this tool reflects the underlying physics more accurately than existing...

  11. Design Graphics

    Science.gov (United States)

    1990-01-01

    A mathematician, David R. Hedgley, Jr. developed a computer program that considers whether a line in a graphic model of a three-dimensional object should or should not be visible. Known as the Hidden Line Computer Code, the program automatically removes superfluous lines and displays an object from a specific viewpoint, just as the human eye would see it. An example of how one company uses the program is the experience of Birdair which specializes in production of fabric skylights and stadium covers. The fabric called SHEERFILL is a Teflon coated fiberglass material developed in cooperation with DuPont Company. SHEERFILL glazed structures are either tension structures or air-supported tension structures. Both are formed by patterned fabric sheets supported by a steel or aluminum frame or cable network. Birdair uses the Hidden Line Computer Code, to illustrate a prospective structure to an architect or owner. The program generates a three- dimensional perspective with the hidden lines removed. This program is still used by Birdair and continues to be commercially available to the public.

  12. Application Design Of Interactive Multimedia Development Based Motion Graphic On Making Fashion Design Learning In Digital Format

    Directory of Open Access Journals (Sweden)

    Winwin Wiana

    2017-05-01

    Full Text Available This study is a research and development aimed at developing multimedia interactive learning based animation as an effort to improve student learning motivation in learning Fashion Design Technology apart from this study also aims to design a learning program courses Fashion Design Technology with a focus on optimizing the use of interactive media in learning process. From this study showed 1 A preliminary study found that the problems faced by students when studying Fashion Design Technology is the student is not optimal when learning designing clothes based computer technology both in terms of learning content learning mechanisms that still uses a linear media and limitations of highly structured learning time. 2 Animation multimedia has the following characteristics a media of learning is convergent interactive self-contained in the sense of giving convenience to users without the guidance of others as multimedia applications can present the material to see more interesting and informative. 3 Design of multimedia learning software developed include the creation of flowcharts storyboards and drafting manuscript of interactive multimedia based animation. 4 Based on the results of validation by multimedia experts obtained an average percentage of 85.55 viability of the material experts obtained an average percentage of 90.84 viability and by students as users gained an average percentage of 96.38 eligibility so it can be said that the standard of the feasibility of interactive multimedia based animation developed is included in the category of Very High or Very Good. Furthermore experts agree that the development of interactive multimedia based animation on learning Fashion Design Technology can be used with some aspects that need to be improved to obtain higher levels of feasibility more optimal.

  13. College Millennials and their Interaction with Social Mobile Tools

    Directory of Open Access Journals (Sweden)

    Sonia RUIZ BLANCO

    2016-06-01

    Full Text Available In the past few years College professors has the challenge of teaching the so-called “Generation Y” or “Millennials”, ie the age group born between 1980 and 2000 who raise with the existence of the Internet, which implies an approach to knowledge and learning different from previous generations. At college, especially more experienced professors are concerned over the possibility that learners knows these tools better than the professor himself, however, professors who have learned to use these new technologies have observed, surprisingly, as this age group can get to know many tools but not their proper use, in personal or professional environment. Over the past five years, we have conduced a survey about Web 2.0 tools used by learners, and their evolution over time as well as the use made of them. This article focuses on the relationship between students and mobile devices and how they they use these tools and services.

  14. Interactive Construction Digital Tools With Real Time Analysis

    DEFF Research Database (Denmark)

    Klitgaard, Jens; Kirkegaard, Poul Henning

    2007-01-01

    . The aim of this research is to look into integrated digital design and analysis tools in order to find out if it is suited for use by architects and designers or only by specialists and technicians - and if not, then to look at what can be done to make them more available to architects and designers...... an architect-engineer or hybrid practitioner works simultaneously with both aesthetic and technical design requirements. In this paper the problem of a vague or not existing link between digital design tools, used by architects and designers, and the analysis tools developed by and for engineers is considered......The recent developments in computational design tools have evolved into a sometimes purely digital process which opens up for new perspectives and problems in the sketching process. One of the interesting possibilities lay within the hybrid practitioner- or architect-engineer approach, where...

  15. How NASA is building and sustaining a community of scientist-communicators through virtual technology, graphic facilitation and other community-building tools

    Science.gov (United States)

    DeWitt, S.; Bovaird, E.; Stewart, N.; Reaves, J.; Tenenbaum, L. F.; Betz, L.; Kuchner, M. J.; Dodson, K. E.; Miller, A.

    2013-12-01

    In 2013 NASA launched its first agency-wide effort to cultivate and support scientist-communicators. The multiple motivations behind this effort are complex and overlapping, and include a desire to connect the agency's workforce to its mission and to each other in the post-Space Shuttle era; a shift in how the agency and the world communicates about science; the current public perception of science and of NASA, and a desire to share the stories of the real people behind the agency's technical work. Leaders in the NASA science, communications and public outreach communities partnered with the agency's training and leadership development organization to: identify and fully characterize the need for training and development in science communication, experiment with various learning models, and invite early-adopter scientists to evaluate these models for future agency investment. Using virtual collaboration technology, graphic facilitation, and leadership development methods, we set out to create an environment where scientist-communicators can emerge and excel. First, we asked scientists from across the agency to identify their motivations, opportunities, barriers and areas of interest in science communication. Scientists identified a need to go beyond traditional media training, a need for continuous practice and peer feedback, and a need for agency incentives and sustained support for this kind of work. This community-driven approach also uncovered a serious need for communication support in the wake of diminishing resources for travel and conference attendance. As a first step, we offered a series of virtual learning events - highly collaborative working sessions for scientists to practice their communication technique, develop and apply new skills to real-world situations, and gain valuable feedback from external subject matter experts and fellow scientists from across the agency in a supportive environment. Scientists from ten NASA centers and a broad range of

  16. Printing--Graphic Arts--Graphic Communications

    Science.gov (United States)

    Hauenstein, A. Dean

    1975-01-01

    Recently, "graphic arts" has shifted from printing skills to a conceptual approach of production processes. "Graphic communications" must embrace the total system of communication through graphic media, to serve broad career education purposes; students taught concepts and principles can be flexible and adaptive. The author…

  17. Nuclear reactors; graphical symbols

    International Nuclear Information System (INIS)

    1987-11-01

    This standard contains graphical symbols that reveal the type of nuclear reactor and is used to design graphical and technical presentations. Distinguishing features for nuclear reactors are laid down in graphical symbols. (orig.) [de

  18. Concurrent use of data base and graphics computer workstations to provide graphic access to large, complex data bases for robotics control of nuclear surveillance and maintenance

    International Nuclear Information System (INIS)

    Dalton, G.R.; Tulenko, J.S.; Zhou, X.

    1990-01-01

    The University of Florida is part of a multiuniversity research effort, sponsored by the US Department of Energy which is under way to develop and deploy an advanced semi-autonomous robotic system for use in nuclear power stations. This paper reports on the development of the computer tools necessary to gain convenient graphic access to the intelligence implicit in a large complex data base such as that in a nuclear reactor plant. This program is integrated as a man/machine interface within the larger context of the total computerized robotic planning and control system. The portion of the project described here addresses the connection between the three-dimensional displays on an interactive graphic workstation and a data-base computer running a large data-base server program. Programming the two computers to work together to accept graphic queries and return answers on the graphic workstation is a key part of the interactive capability developed

  19. Programming Language Software For Graphics Applications

    Science.gov (United States)

    Beckman, Brian C.

    1993-01-01

    New approach reduces repetitive development of features common to different applications. High-level programming language and interactive environment with access to graphical hardware and software created by adding graphical commands and other constructs to standardized, general-purpose programming language, "Scheme". Designed for use in developing other software incorporating interactive computer-graphics capabilities into application programs. Provides alternative to programming entire applications in C or FORTRAN, specifically ameliorating design and implementation of complex control and data structures typifying applications with interactive graphics. Enables experimental programming and rapid development of prototype software, and yields high-level programs serving as executable versions of software-design documentation.

  20. Metabolic interrelationships software application: Interactive learning tool for intermediary metabolism

    NARCIS (Netherlands)

    A.J.M. Verhoeven (Adrie); M. Doets (Mathijs); J.M.J. Lamers (Jos); J.F. Koster (Johan)

    2005-01-01

    textabstractWe developed and implemented the software application titled Metabolic Interrelationships as a self-learning and -teaching tool for intermediary metabolism. It is used by undergraduate medical students in an integrated organ systems-based and disease-oriented core curriculum, which

  1. 3-D interactive visualisation tools for Hi spectral line imaging

    NARCIS (Netherlands)

    van der Hulst, J. M.; Punzo, D.; Roerdink, J. B. T. M.

    2016-01-01

    Upcoming HI surveys will deliver such large datasets that automated processing using the full 3-D information to find and characterize HI objects is unavoidable. Full 3-D visualization is an essential tool for enabling qualitative and quantitative inspection and analysis of the 3-D data, which is

  2. GURU v2.0: An interactive Graphical User interface to fit rheometer curves in Han’s model for rubber vulcanization

    Directory of Open Access Journals (Sweden)

    G. Milani

    2016-01-01

    Full Text Available A GUI software (GURU for experimental data fitting of rheometer curves in Natural Rubber (NR vulcanized with sulphur at different curing temperatures is presented. Experimental data are automatically loaded in GURU from an Excel spreadsheet coming from the output of the experimental machine (moving die rheometer. To fit the experimental data, the general reaction scheme proposed by Han and co-workers for NR vulcanized with sulphur is considered. From the simplified kinetic scheme adopted, a closed form solution can be found for the crosslink density, with the only limitation that the induction period is excluded from computations. Three kinetic constants must be determined in such a way to minimize the absolute error between normalized experimental data and numerical prediction. Usually, this result is achieved by means of standard least-squares data fitting. On the contrary, GURU works interactively by means of a Graphical User Interface (GUI to minimize the error and allows an interactive calibration of the kinetic constants by means of sliders. A simple mouse click on the sliders allows the assignment of a value for each kinetic constant and a visual comparison between numerical and experimental curves. Users will thus find optimal values of the constants by means of a classic trial and error strategy. An experimental case of technical relevance is shown as benchmark.

  3. Big Data Visualization Tools

    OpenAIRE

    Bikakis, Nikos

    2018-01-01

    Data visualization is the presentation of data in a pictorial or graphical format, and a data visualization tool is the software that generates this presentation. Data visualization provides users with intuitive means to interactively explore and analyze data, enabling them to effectively identify interesting patterns, infer correlations and causalities, and supports sense-making activities.

  4. New ROOT Graphical User Interfaces for fitting

    International Nuclear Information System (INIS)

    Maline, D Gonzalez; Moneta, L; Antcheva, I

    2010-01-01

    ROOT, as a scientific data analysis framework, provides extensive capabilities via Graphical User Interfaces (GUI) for performing interactive analysis and visualizing data objects like histograms and graphs. A new interface for fitting has been developed for performing, exploring and comparing fits on data point sets such as histograms, multi-dimensional graphs or trees. With this new interface, users can build interactively the fit model function, set parameter values and constraints and select fit and minimization methods with their options. Functionality for visualizing the fit results is as well provided, with the possibility of drawing residuals or confidence intervals. Furthermore, the new fit panel reacts as a standalone application and it does not prevent users from interacting with other windows. We will describe in great detail the functionality of this user interface, covering as well new capabilities provided by the new fitting and minimization tools introduced recently in the ROOT framework.

  5. Software tool for representation and processing of experimental data on high energy interactions of elementary particles

    International Nuclear Information System (INIS)

    Cherepanov, E.O.; Skachkov, N.B.

    2002-01-01

    The software tool is developed for detailed and evident displaying of information about energy and space distribution of secondary particles produced in the processes of elementary particles collisions. As input information the data on the components of 4-momenta of secondary particles is used. As for these data the information obtained from different parts of physical detector (for example, from the calorimeter or tracker) as well as the information obtained with the help of event generator is taken. The tool is intended for use in Windows operation system and is developed on the basis of Borland Delphi. Mathematical architecture of the software tool allows user to receive complete information without making additional calculations. The program automatically performs analysis of structure and distributions of signals and displays the results in a transparent form which allows their quick analysis. To display the information the three-dimensional graphic methods as well as colour decisions based on intuitive associations are also used. (author)

  6. The ZAP Project: Designing Interactive Computer Tools for Learning Psychology

    Science.gov (United States)

    Hulshof, Casper; Eysink, Tessa; de Jong, Ton

    2006-01-01

    In the ZAP project, a set of interactive computer programs called "ZAPs" was developed. The programs were designed in such a way that first-year students experience psychological phenomena in a vivid and self-explanatory way. Students can either take the role of participant in a psychological experiment, they can experience phenomena themselves,…

  7. The appliance of graphics modeling in nuclear plant information system

    International Nuclear Information System (INIS)

    Bai Zhe; Li Guofang

    2010-01-01

    The nuclear plants contain a lot of sub-system, such as operation management, manufacture system, inventory system, human resource system and so forth. The standardized data graphics modeling technology can ensure the data interaction, compress the design cycle, avoid the replicated design, ensure the data integrity and consistent. The standardized data format which is on the basis of STEP standard and complied with XML is competent tool in different sub-system of nuclear plants. In order to meet this demand, a data graphics modeling standard is proposed. It is shown the relationship between systems, in system, between data by the standard. The graphic modeling effectively improves the performance between systems, designers, engineers, operations, supports department. It also provides the reliable and available data source for data mining and business intelligence. (authors)

  8. Validity of tools used for surveying physicians about their interactions with pharmaceutical company: a systematic review.

    Science.gov (United States)

    Lotfi, Tamara; Morsi, Rami Z; Zmeter, Nada; Godah, Mohammad W; Alkhaled, Lina; Kahale, Lara A; Nass, Hala; Brax, Hneine; Fadlallah, Racha; Akl, Elie A

    2015-11-25

    There is evidence that physicians' prescription behavior is negatively affected by the extent of their interactions with pharmaceutical companies. In order to develop and implement policies and interventions for better management of interactions, we need to understand physicians' perspectives on this issue. Surveys addressing physicians' interactions with pharmaceutical companies need to use validated tools to ensure the validity of their findings. To assess the validity of tools used in surveys of physicians about the extent and nature of their interactions with pharmaceutical companies, and about their knowledge, beliefs and attitudes towards such interactions; and to identify those tools that have been formally validated. We developed a search strategy with the assistance of a medical librarian. We electronically searched MEDLINE and EMBASE databases in September 2015. Teams of two reviewers conducted data selection and data abstraction. They identified eligible studies in one table and then abstracted the relevant data from the studies with validated tools in another table. Tables were piloted and standardized. We identified one validated questionnaire out of the 11 assessing the nature and extent of the interaction, and three validated questionnaires out of the 47 assessing knowledge, beliefs and attitudes of physicians toward the interaction. None of these validated questionnaires were used in more than one survey. The available supporting evidence of the issue of physicians' interaction with pharmaceutical company is of low quality. There is a need for research to develop and validate tools to survey physicians about their interactions with pharmaceutical companies.

  9. Glycodendrimers: tools to explore multivalent galectin-1 interactions

    Directory of Open Access Journals (Sweden)

    Jonathan M. Cousin

    2015-05-01

    Full Text Available Four generations of lactose-functionalized polyamidoamine (PAMAM were employed to further the understanding of multivalent galectin-1 mediated interactions. Dynamic light scattering and fluorescence microscopy were used to study the multivalent interaction of galectin-1 with the glycodendrimers in solution, and glycodendrimers were observed to organize galectin-1 into nanoparticles. In the presence of a large excess of galectin-1, glycodendrimers nucleated galectin-1 into nanoparticles that were remarkably homologous in size (400–500 nm. To understand augmentation of oncologic cellular aggregation by galectin-1, glycodendrimers were used in cell-based assays with human prostate carcinoma cells (DU145. The results revealed that glycodendrimers provided competitive binding sites for galectin-1, which diverted galectin-1 from its typical function in cellular aggregation of DU145 cells.

  10. Social media, interactive tools that change business model dynamics

    OpenAIRE

    Rodriguez Donaire, Silvia

    2012-01-01

    The aim of this research is two-folded. On the one hand, it attempts to assist employers of Catalan micro-retailers in designing, implementing and developing their Social Media strategy as a complementary channel of communication. On the other hand, it attempts to contribute to the research community with a better understanding on both which building block of the micro-retailer¿s Business Model is more influenced by the customer level of interaction by means of the Social Media...

  11. Tools to study pathogen-host interactions in bats.

    Science.gov (United States)

    Banerjee, Arinjay; Misra, Vikram; Schountz, Tony; Baker, Michelle L

    2018-03-15

    Bats are natural reservoirs for a variety of emerging viruses that cause significant disease in humans and domestic animals yet rarely cause clinical disease in bats. The co-evolutionary history of bats with viruses has been hypothesized to have shaped the bat-virus relationship, allowing both to exist in equilibrium. Progress in understanding bat-virus interactions and the isolation of bat-borne viruses has been accelerated in recent years by the development of susceptible bat cell lines. Viral sequences similar to severe acute respiratory syndrome corona virus (SARS-CoV) have been detected in bats, and filoviruses such as Marburg virus have been isolated from bats, providing definitive evidence for the role of bats as the natural host reservoir. Although viruses can be readily detected in bats using molecular approaches, virus isolation is far more challenging. One of the limitations in using traditional culture systems from non-reservoir species is that cell types and culture conditions may not be compatible for isolation of bat-borne viruses. There is, therefore, a need to develop additional bat cell lines that correspond to different cell types, including less represented cell types such as immune cells, and culture them under more physiologically relevant conditions to study virus host interactions and for virus isolation. In this review, we highlight the current progress in understanding bat-virus interactions in bat cell line systems and some of the challenges and limitations associated with cell lines. Future directions to address some of these challenges to better understand host-pathogen interactions in these intriguing mammals are also discussed, not only in relation to viruses but also other pathogens carried by bats including bacteria and fungi. Copyright © 2018 Elsevier B.V. All rights reserved.

  12. IT-CARES: an interactive tool for case-crossover analyses of electronic medical records for patient safety.

    Science.gov (United States)

    Caron, Alexandre; Chazard, Emmanuel; Muller, Joris; Perichon, Renaud; Ferret, Laurie; Koutkias, Vassilis; Beuscart, Régis; Beuscart, Jean-Baptiste; Ficheur, Grégoire

    2017-03-01

    The significant risk of adverse events following medical procedures supports a clinical epidemiological approach based on the analyses of collections of electronic medical records. Data analytical tools might help clinical epidemiologists develop more appropriate case-crossover designs for monitoring patient safety. To develop and assess the methodological quality of an interactive tool for use by clinical epidemiologists to systematically design case-crossover analyses of large electronic medical records databases. We developed IT-CARES, an analytical tool implementing case-crossover design, to explore the association between exposures and outcomes. The exposures and outcomes are defined by clinical epidemiologists via lists of codes entered via a user interface screen. We tested IT-CARES on data from the French national inpatient stay database, which documents diagnoses and medical procedures for 170 million inpatient stays between 2007 and 2013. We compared the results of our analysis with reference data from the literature on thromboembolic risk after delivery and bleeding risk after total hip replacement. IT-CARES provides a user interface with 3 columns: (i) the outcome criteria in the left-hand column, (ii) the exposure criteria in the right-hand column, and (iii) the estimated risk (odds ratios, presented in both graphical and tabular formats) in the middle column. The estimated odds ratios were consistent with the reference literature data. IT-CARES may enhance patient safety by facilitating clinical epidemiological studies of adverse events following medical procedures. The tool's usability must be evaluated and improved in further research. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association.

  13. Profiling Heparin-Chemokine Interactions Using Synthetic Tools

    Science.gov (United States)

    de Paz, Jose L.; Moseman, E. Ashley; Noti, Christian; Polito, Laura; von Andrian, Ulrich H.; Seeberger, Peter H.

    2009-01-01

    Glycosaminoglycans (GAGs), such as heparin or heparan sulfate, are required for the in vivo function of chemokines. Chemokines play a crucial role in the recruitment of leukocyte subsets to sites of inflammation and lymphocytes trafficking. GAG-chemokine interactions mediate cell migration and determine which leukocyte subsets enter tissues. Identifying the exact GAC sequences that bind to particular chemokines is key to understand chemokine function at the molecular level and develop strategies to interfere with chemokine-mediated processes. Here, we characterize the heparin binding profiles of eight chemokines (CCL21, IL-8, CXCL12, CXCL13, CCL19, CCL25, CCL28, and CXCL16) by employing heparin microarrays containing a small library of synthetic heparin oligosaccharides. The chemokines differ significantly in their interactions with heparin oligosaccharides: While some chemokines, (e.g., CCL21) strongly bind to a hexasaccharide containing the GlcNSO3(6-OSO3)-IdoA(2-OSO3) repeating unit, CCL19 does not bind and CXCL12 binds only weakly. The carbohydrate microarray binding results were validated by surface plasmon resonance experiments. In vitro chemotaxis assays revealed that dendrimers coated with the fully sulfated heparin hexasaccharide inhibit lymphocyte migration toward CCL21. Migration toward CXCL12 or CCL19 was not affected. These in vitro homing assays indicate that multivalent synthetic heparin dendrimers inhibit the migration of lymphocytes toward certain chemokine gradients by blocking the formation of a chemokine concentration gradient on GAG endothelial chains. These findings are in agreement with preliminary in vivo measurements of circulating lymphocytes. The results presented here contribute to the understanding of GAG-chemokine interactions, a first step toward the design of novel drugs that modulate chemokine activity. PMID:18030990

  14. UROX 2.0: an interactive tool for fitting atomic models into electron-microscopy reconstructions

    International Nuclear Information System (INIS)

    Siebert, Xavier; Navaza, Jorge

    2009-01-01

    UROX is software designed for the interactive fitting of atomic models into electron-microscopy reconstructions. The main features of the software are presented, along with a few examples. Electron microscopy of a macromolecular structure can lead to three-dimensional reconstructions with resolutions that are typically in the 30–10 Å range and sometimes even beyond 10 Å. Fitting atomic models of the individual components of the macromolecular structure (e.g. those obtained by X-ray crystallography or nuclear magnetic resonance) into an electron-microscopy map allows the interpretation of the latter at near-atomic resolution, providing insight into the interactions between the components. Graphical software is presented that was designed for the interactive fitting and refinement of atomic models into electron-microscopy reconstructions. Several characteristics enable it to be applied over a wide range of cases and resolutions. Firstly, calculations are performed in reciprocal space, which results in fast algorithms. This allows the entire reconstruction (or at least a sizeable portion of it) to be used by taking into account the symmetry of the reconstruction both in the calculations and in the graphical display. Secondly, atomic models can be placed graphically in the map while the correlation between the model-based electron density and the electron-microscopy reconstruction is computed and displayed in real time. The positions and orientations of the models are refined by a least-squares minimization. Thirdly, normal-mode calculations can be used to simulate conformational changes between the atomic model of an individual component and its corresponding density within a macromolecular complex determined by electron microscopy. These features are illustrated using three practical cases with different symmetries and resolutions. The software, together with examples and user instructions, is available free of charge at http://mem.ibs.fr/UROX/

  15. Use of online interactive tools in an open distance learning context ...

    African Journals Online (AJOL)

    Kefiloe Adolphina Maboe

    Objective: The purpose of this study was to determine how the discussion forum as an online interactive tool be used in ... and study material, and students and the ODL institution. .... The questionnaire was developed in English. Its develop-.

  16. Hypertension module: an interactive learning tool in physiology.

    Science.gov (United States)

    Işman, C A; Gülpinar, M A; Kurtel, H; Alican, I; Yeğen, B C

    2003-12-01

    The aim of the present study was to evaluate the strong or weak aspects of an interactive study module introduced during the "Cardiovascular and Respiratory Systems Subject Committee" in the second year of the medical program. Five study groups consisting of 25 students attended two-hour module sessions for six weeks with the same tutor. According to the module assessment questionnaire, the majority of the students assessed the module as excellent or good. The students reported that they had gained not only in knowledge but also in skills development. The general opinion of the students was that both the organization and the implementation of the module met their expectations. Nearly one-half of the students reported that their expectations with regard to the educational environment and the participation of students were fully met. The major weakness in this new educational trial appears to be assessment of the module.

  17. An interactive water indicator assessment tool to support land use planning

    NARCIS (Netherlands)

    Hellegers, P.J.G.J.; Jansen, H.C.; Bastiaanssen, W.G.M.

    2012-01-01

    This paper presents an interactive web-based rapid assessment tool that generates key water related indicators to support decision making by stakeholders in land use planning. The tool is built on a consistent science based method that combines remote sensing with hydrological and socioeconomic

  18. HCI^2 Workbench: A Development Tool for Multimodal Human-Computer Interaction Systems

    NARCIS (Netherlands)

    Shen, Jie; Wenzhe, Shi; Pantic, Maja

    In this paper, we present a novel software tool designed and implemented to simplify the development process of Multimodal Human-Computer Interaction (MHCI) systems. This tool, which is called the HCI^2 Workbench, exploits a Publish / Subscribe (P/S) architecture [13] [14] to facilitate efficient

  19. The DiaCog: A Prototype Tool for Visualizing Online Dialog Games' Interactions

    Science.gov (United States)

    Yengin, Ilker; Lazarevic, Bojan

    2014-01-01

    This paper proposes and explains the design of a prototype learning tool named the DiaCog. The DiaCog visualizes dialog interactions within an online dialog game by using dynamically created cognitive maps. As a purposefully designed tool for enhancing learning effectiveness the DiaCog might be applicable to dialogs at discussion boards within a…

  20. Development of an Interactive Social Media Tool for Parents with Concerns about Vaccines

    Science.gov (United States)

    Shoup, Jo Ann; Wagner, Nicole M.; Kraus, Courtney R.; Narwaney, Komal J.; Goddard, Kristin S.; Glanz, Jason M.

    2015-01-01

    Objective: Describe a process for designing, building, and evaluating a theory-driven social media intervention tool to help reduce parental concerns about vaccination. Method: We developed an interactive web-based tool using quantitative and qualitative methods (e.g., survey, focus groups, individual interviews, and usability testing). Results:…

  1. High-volume image quality assessment systems: tuning performance with an interactive data visualization tool

    Science.gov (United States)

    Bresnahan, Patricia A.; Pukinskis, Madeleine; Wiggins, Michael

    1999-03-01

    evaluation. Lower-level pass-fail conditions and decision rules were coded into the system. Higher-level image quality states were defined by allowing the users to interactively adjust the system's sensitivity to various image attributes by manipulating graphical controls. Results were presented in easily interpreted bar graphs. These graphs were mouse- sensitive, allowing the user to more fully explore the subsets of data indicated by various color blocks. In order to simplify the performance evaluation and tuning process, users could choose to view the results of (1) the existing system parameter state, (2) the results of any arbitrary parameter values they chose, or (3) the results of a quasi-optimum parameter state, derived by applying a decision rule to a large set of possible parameter states. Giving managers easy- to-use tools for defining the more subjective aspects of quality resulted in a system that responded to contextual cues that are difficult to hard-code. It had the additional advantage of allowing the definition of quality to evolve over time, as users became more knowledgeable as to the strengths and limitations of an automated quality inspection system.

  2. Web Delivery of Interactive Laboratories: Comparison of Three Authoring Tools

    Science.gov (United States)

    Silbar, Richard R.

    2002-04-01

    It is well-known that the more a student interacts with a subject, the better he or she will learn it. This is particularly true in technical subjects. One way to do this is to have computer-based "laboratories" in which the student manipulates objects on the screen with keyboard or mouse and then sees the outcome of those actions. One example of such a laboratory we have built, using Macromedia's Authorware, deals with addition of two vectors in the geometric approach. The problem with Authorware, however, is that, if one wants to deliver the training over the Web, that requires the download and installation of a big plug-in. Therefore, as an experiment, I built clones of the Vector Addition Laboratory using Macromedia's Director or Flash, each of which have smaller plug-ins which are often already installed in the user's browser. The Director and Flash versions are similar to (but definitely not the same as) the Authorware version. This talk goes into these differences and demonstrates the techniques used. You can view the three examples on-line at http://www.whistlesoft.com/ silbar.

  3. Digital Interactive Narrative Tools for Facilitating Communication with Children During Counseling

    DEFF Research Database (Denmark)

    Baceviciute, Sarune; Albæk, Katharina R.R.; Arsovski, Aleksandar

    2012-01-01

    the reconciliation between free-play and narratives afforded by interactive digital tools in order to promote children‟s engagement. We present a digital interactive narrative application integrated with a “step-by-step” guide to the counselor, which could be adapted to many different situations and contexts where...

  4. Digital interactive narrative tools for facilitating communication with children during counseling: A case for audiology

    DEFF Research Database (Denmark)

    Baceviciute, Sarune; Rützou Albæk, Katharina Renée; Arsovski, Aleksandar

    2012-01-01

    the reconciliation between free-play and narratives afforded by interactive digital tools in order to promote children's engagement. We present a digital interactive narrative application integrated with a ``step-by-step'' guide to the counselor, which could be adapted to many different situations and contexts where...

  5. iDoRNA: An Interacting Domain-based Tool for Designing RNA-RNA Interaction Systems

    Directory of Open Access Journals (Sweden)

    Jittrawan Thaiprasit

    2016-03-01

    Full Text Available RNA-RNA interactions play a crucial role in gene regulation in living organisms. They have gained increasing interest in the field of synthetic biology because of their potential applications in medicine and biotechnology. However, few novel regulators based on RNA-RNA interactions with desired structures and functions have been developed due to the challenges of developing design tools. Recently, we proposed a novel tool, called iDoDe, for designing RNA-RNA interacting sequences by first decomposing RNA structures into interacting domains and then designing each domain using a stochastic algorithm. However, iDoDe did not provide an optimal solution because it still lacks a mechanism to optimize the design. In this work, we have further developed the tool by incorporating a genetic algorithm (GA to find an RNA solution with maximized structural similarity and minimized hybridized RNA energy, and renamed the tool iDoRNA. A set of suitable parameters for the genetic algorithm were determined and found to be a weighting factor of 0.7, a crossover rate of 0.9, a mutation rate of 0.1, and the number of individuals per population set to 8. We demonstrated the performance of iDoRNA in comparison with iDoDe by using six RNA-RNA interaction models. It was found that iDoRNA could efficiently generate all models of interacting RNAs with far more accuracy and required far less computational time than iDoDe. Moreover, we compared the design performance of our tool against existing design tools using forty-four RNA-RNA interaction models. The results showed that the performance of iDoRNA is better than RiboMaker when considering the ensemble defect, the fitness score and computation time usage. However, it appears that iDoRNA is outperformed by NUPACK and RNAiFold 2.0 when considering the ensemble defect. Nevertheless, iDoRNA can still be an useful alternative tool for designing novel RNA-RNA interactions in synthetic biology research. The source code of i

  6. PC Graphic file programing

    International Nuclear Information System (INIS)

    Yang, Jin Seok

    1993-04-01

    This book gives description of basic of graphic knowledge and understanding and realization of graphic file form. The first part deals with graphic with graphic data, store of graphic data and compress of data, programing language such as assembling, stack, compile and link of program and practice and debugging. The next part mentions graphic file form such as Mac paint file, GEM/IMG file, PCX file, GIF file, and TIFF file, consideration of hardware like mono screen driver and color screen driver in high speed, basic conception of dithering and conversion of formality.

  7. Graphical User Interface in Art

    Science.gov (United States)

    Gwilt, Ian

    This essay discusses the use of the Graphical User Interface (GUI) as a site of creative practice. By creatively repositioning the GUI as a work of art it is possible to challenge our understanding and expectations of the conventional computer interface wherein the icons and navigational architecture of the GUI no longer function as a technological tool. These artistic recontextualizations are often used to question our engagement with technology and to highlight the pivotal place that the domestic computer has taken in our everyday social, cultural and (increasingly), creative domains. Through these works the media specificity of the screen-based GUI can broken by dramatic changes in scale, form and configuration. This can be seen through the work of new media artists who have re-imagined the GUI in a number of creative forms both, within the digital, as image, animation, net and interactive art, and in the analogue, as print, painting, sculpture, installation and performative event. Furthermore as a creative work, the GUI can also be utilized as a visual way-finder to explore the relationship between the dynamic potentials of the digital and the concretized qualities of the material artifact.

  8. A novel graphical technique for Pinch Analysis applications: Energy Targets and grassroots design

    International Nuclear Information System (INIS)

    Gadalla, Mamdouh A.

    2015-01-01

    Graphical abstract: A new HEN graphical design. - Highlights: • A new graphical technique for heat exchanger networks design. • Pinch Analysis principles and design rules are better interpreted. • Graphical guidelines for optimum heat integration. • New temperature-based graphs provide user-interactive features. - Abstract: Pinch Analysis is for decades a leading tool to energy integration for retrofit and design. This paper presents a new graphical technique, based on Pinch Analysis, for the grassroots design of heat exchanger networks. In the new graph, the temperatures of hot streams are plotted versus those of the cold streams. The temperature–temperature based graph is constructed to include temperatures of hot and cold streams as straight lines, horizontal lines for hot streams, and vertical lines for cold streams. The graph is applied to determine the pinch temperatures and Energy Targets. It is then used to synthesise graphically a complete exchanger network, achieving the Energy Targets. Within the new graph, exchangers are represented by inclined straight lines, whose slopes are proportional to the ratio of heat capacities and flows. Pinch Analysis principles for design are easily interpreted using this new graphical technique to design a complete exchanger network. Network designs achieved by the new technique can guarantee maximum heat recovery. The new technique can also be employed to simulate basic designs of heat exchanger networks. The strengths of the new tool are that it is simply applied using computers, requires no commercial software, and can be used for academic purposes/engineering education

  9. Graphical programming of telerobotic tasks

    International Nuclear Information System (INIS)

    Small, D.E.; McDonald, M.J.

    1997-01-01

    With a goal of producing faster, safer, and cheaper technologies for nuclear waste cleanup, Sandia is actively developing and extending intelligent systems technologies. Graphical Programming is a key technology for robotic waste cleanup that Sandia is developing for this goal. This paper describes Sancho, Sandia most advanced Graphical Programming supervisory software. Sancho, now operational on several robot systems, incorporates all of Sandia's recent advances in supervisory control. Sancho, developed to rapidly apply Graphical Programming on a diverse set of robot systems, uses a general set of tools to implement task and operational behavior. Sancho can be rapidly reconfigured for new tasks and operations without modifying the supervisory code. Other innovations include task-based interfaces, event-based sequencing, and sophisticated GUI design. These innovations have resulted in robot control programs and approaches that are easier and safer to use than teleoperation, off-line programming, or full automation

  10. Interactive tool that empowers structural understanding and enables FEM analysis in a parametric design environment

    DEFF Research Database (Denmark)

    Christensen, Jesper Thøger; Parigi, Dario; Kirkegaard, Poul Henning

    2014-01-01

    This paper introduces an interactive tool developed to integrate structural analysis in the architectural design environment from the early conceptual design stage. The tool improves exchange of data between the design environment of Rhino Grasshopper and the FEM analysis of Autodesk Robot...... Structural Analysis. Further the tool provides intuitive setup and visual aids in order to facilitate the process. Enabling students and professionals to quickly analyze and evaluate multiple design variations. The tool has been developed inside the Performance Aided Design course at the Master...... of Architecture and Design at Aalborg University...

  11. WASAT. A graphical user interface for visualization of wave spectrograms

    Energy Technology Data Exchange (ETDEWEB)

    Joergensen, R

    1996-12-01

    The report describes a technique for the decoding and visualization of sounding rocket data sets. A specific application for the visualization of three dimensional wave HF FFT spectra obtained from the SCIFER sounding rocket launched January 25, 1995, is made. The data set was decoded from its original data format which was the NASA DITES I/II format. A graphical user interface, WASAT (WAve Spectrogram Analysis Tool), using the Interactive Data Language was created. The data set was visualized using IDL image tools overlayed with contour routines. The user interface was based on the IDL widget concept. 9 refs., 7 figs.

  12. WASAT. A graphical user interface for visualization of wave spectrograms

    International Nuclear Information System (INIS)

    Joergensen, R.

    1996-12-01

    The report describes a technique for the decoding and visualization of sounding rocket data sets. A specific application for the visualization of three dimensional wave HF FFT spectra obtained from the SCIFER sounding rocket launched January 25, 1995, is made. The data set was decoded from its original data format which was the NASA DITES I/II format. A graphical user interface, WASAT (WAve Spectrogram Analysis Tool), using the Interactive Data Language was created. The data set was visualized using IDL image tools overlayed with contour routines. The user interface was based on the IDL widget concept. 9 refs., 7 figs

  13. Graphic Turbulence Guidance

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Forecast turbulence hazards identified by the Graphical Turbulence Guidance algorithm. The Graphical Turbulence Guidance product depicts mid-level and upper-level...

  14. Graphical Turbulence Guidance - Composite

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Forecast turbulence hazards identified by the Graphical Turbulence Guidance algorithm. The Graphical Turbulence Guidance product depicts mid-level and upper-level...

  15. Graphical Rasch models

    DEFF Research Database (Denmark)

    Kreiner, Svend; Christensen, Karl Bang

    Rasch models; Partial Credit models; Rating Scale models; Item bias; Differential item functioning; Local independence; Graphical models......Rasch models; Partial Credit models; Rating Scale models; Item bias; Differential item functioning; Local independence; Graphical models...

  16. The pyPHaz software, an interactive tool to analyze and visualize results from probabilistic hazard assessments

    Science.gov (United States)

    Tonini, Roberto; Selva, Jacopo; Costa, Antonio; Sandri, Laura

    2014-05-01

    Probabilistic Hazard Assessment (PHA) is becoming an essential tool for risk mitigation policies, since it allows to quantify the hazard due to hazardous phenomena and, differently from the deterministic approach, it accounts for both aleatory and epistemic uncertainties. On the other hand, one of the main disadvantages of PHA methods is that their results are not easy to understand and interpret by people who are not specialist in probabilistic tools. For scientists, this leads to the issue of providing tools that can be easily used and understood by decision makers (i.e., risk managers or local authorities). The work here presented fits into the problem of simplifying the transfer between scientific knowledge and land protection policies, by providing an interface between scientists, who produce PHA's results, and decision makers, who use PHA's results for risk analyses. In this framework we present pyPHaz, an open tool developed and designed to visualize and analyze PHA results due to one or more phenomena affecting a specific area of interest. The software implementation has been fully developed with the free and open-source Python programming language and some featured Python-based libraries and modules. The pyPHaz tool allows to visualize the Hazard Curves (HC) calculated in a selected target area together with different levels of uncertainty (mean and percentiles) on maps that can be interactively created and modified by the user, thanks to a dedicated Graphical User Interface (GUI). Moreover, the tool can be used to compare the results of different PHA models and to merge them, by creating ensemble models. The pyPHaz software has been designed with the features of storing and accessing all the data through a MySQL database and of being able to read as input the XML-based standard file formats defined in the frame of GEM (Global Earthquake Model). This format model is easy to extend also to any other kind of hazard, as it will be shown in the applications

  17. INTERFACING INTERACTIVE DATA ANALYSIS TOOLS WITH THE GRID: THE PPDG CS-11 ACTIVITY

    International Nuclear Information System (INIS)

    Perl, Joseph

    2003-01-01

    For today's physicists, who work in large geographically distributed collaborations, the data grid promises significantly greater capabilities for analysis of experimental data and production of physics results than is possible with today's ''remote access'' technologies. The goal of letting scientists at their home institutions interact with and analyze data as if they were physically present at the major laboratory that houses their detector and computer center has yet to be accomplished. The Particle Physics Data Grid project (www.ppdg.net) has recently embarked on an effort to ''Interface and Integrate Interactive Data Analysis Tools with the grid and identify Common Components and Services''. The initial activities are to collect known and identify new requirements for grid services and analysis tools from a range of current and future experiments to determine if existing plans for tools and services meet these requirements. Follow-on activities will foster the interaction between grid service developers, analysis tool developers, experiment analysis framework developers and end user physicists, and will identify and carry out specific development/integration work so that interactive analysis tools utilizing grid services actually provide the capabilities that users need. This talk will summarize what we know of requirements for analysis tools and grid services, as well as describe the identified areas where more development work is needed

  18. Bayesian Graphical Models

    DEFF Research Database (Denmark)

    Jensen, Finn Verner; Nielsen, Thomas Dyhre

    2016-01-01

    Mathematically, a Bayesian graphical model is a compact representation of the joint probability distribution for a set of variables. The most frequently used type of Bayesian graphical models are Bayesian networks. The structural part of a Bayesian graphical model is a graph consisting of nodes...

  19. VAX Professional Workstation goes graphic

    International Nuclear Information System (INIS)

    Downward, J.G.

    1984-01-01

    The VAX Professional Workstation (VPW) is a collection of programs and procedures designed to provide an integrated work-station environment for the staff at KMS Fusion's research laboratories. During the past year numerous capabilities have been added to VPW, including support for VT125/VT240/4014 graphic workstations, editing windows, and additional desk utilities. Graphics workstation support allows users to create, edit, and modify graph data files, enter the data via a graphic tablet, create simple plots with DATATRIEVE or DECgraph on ReGIS terminals, or elaborate plots with TEKGRAPH on ReGIS or Tektronix terminals. Users may assign display error bars to the data and interactively plot it in a variety of ways. Users also can create and display viewgraphs. Hard copy output for a large network of office terminals is obtained by multiplexing each terminal's video output into a recently developed video multiplexer front ending a single channel video hard copy unit

  20. Fractal geometry and computer graphics

    CERN Document Server

    Sakas, Georgios; Peitgen, Heinz-Otto; Englert, Gabriele

    1992-01-01

    Fractal geometry has become popular in the last 15 years, its applications can be found in technology, science, or even arts. Fractal methods and formalism are seen today as a general, abstract, but nevertheless practical instrument for the description of nature in a wide sense. But it was Computer Graphics which made possible the increasing popularity of fractals several years ago, and long after their mathematical formulation. The two disciplines are tightly linked. The book contains the scientificcontributions presented in an international workshop in the "Computer Graphics Center" in Darmstadt, Germany. The target of the workshop was to present the wide spectrum of interrelationships and interactions between Fractal Geometry and Computer Graphics. The topics vary from fundamentals and new theoretical results to various applications and systems development. All contributions are original, unpublished papers.The presentations have been discussed in two working groups; the discussion results, together with a...

  1. The Real Time Interactive Display Environment (RTIDE), a display building tool developed by Space Shuttle flight controllers

    Science.gov (United States)

    Kalvelage, Thomas A.

    1989-01-01

    NASA's Mission Control Center, located at Johnson Space Center, is incrementally moving from a centralized architecture to a distributed architecture. Starting with STS-29, some host-driven console screens will be replaced with graphics terminals driven by workstations. These workstations will be supplied realtime data first by the Real Time Data System (RTDS), a system developed inhouse, and then months later (in parallel with RTDS) by interim and subsequently operational versions of the Mission Control Center Upgrade (MCCU) software package. The Real Time Interactive Display Environment (RTIDE) was built by Space Shuttle flight controllers to support the rapid development of multiple new displays to support Shuttle flights. RTIDE is a display building tool that allows non-programmers to define object-oriented, event-driven, mouseable displays. Particular emphasis was placed on upward compatibility between RTIDE versions, ability to acquire data from different data sources, realtime performance, ability to modularly upgrade RTIDE, machine portability, and a clean, powerful user interface. The operational and organizational factors that drove RTIDE to its present form, the actual design itself, simulation and flight performance, and lessons learned in the process are discussed.

  2. Development of the Veritas plot and its application in cardiac surgery: an evidence-synthesis graphic tool for the clinician to assess multiple meta-analyses reporting on a common outcome.

    Science.gov (United States)

    Panesar, Sukhmeet S; Rao, Christopher; Vecht, Joshua A; Mirza, Saqeb B; Netuveli, Gopalakrishnan; Morris, Richard; Rosenthal, Joe; Darzi, Ara; Athanasiou, Thanos

    2009-10-01

    Meta-analyses may be prone to generating misleading results because of a paucity of experimental studies (especially in surgery); publication bias; and heterogeneity in study design, intervention and the patient population of included studies. When investigating a specific clinical or scientific question on which several relevant meta-analyses may have been published, value judgments must be applied to determine which analysis represents the most robust evidence. These value judgments should be specifically acknowledged. We designed the Veritas plot to explicitly explore important elements of quality and to facilitate decision-making by highlighting specific areas in which meta-analyses are found to be deficient. Furthermore, as a graphic tool, it may be more intuitive than when similar data are presented in a tabular or text format. The Veritas plot is an adaption of the radar plot, a graphic tool for the description of multiattribute data. Key elements of meta-analytical quality such as heterogeneity, publication bias and study design are assessed. Existing qualitative methods such as the Assessment of Multiple Systematic Reviews (AMSTAR) tool have been incorporated in addition to important considerations when interpreting surgical meta-analyses such as the year of publication and population characteristics. To demonstrate the potential of the Veritas plot to inform clinical practice, we apply the Veritas plot to the meta-analytical literature comparing the incidence of 30-day stroke in off-pump coronary artery bypass surgery and conventional coronary artery bypass surgery. We demonstrate that a visually-stimulating and practical evidence-synthesis tool can direct the clinician and scientist to a particular meta-analytical study to inform clinical practice. The Veritas plot is also cumulative and allowed us to assess the quality of evidence over time. We have presented a practical graphic application for scientists and clinicians to identify and interpret

  3. Configurable software for satellite graphics

    Energy Technology Data Exchange (ETDEWEB)

    Hartzman, P D

    1977-12-01

    An important goal in interactive computer graphics is to provide users with both quick system responses for basic graphics functions and enough computing power for complex calculations. One solution is to have a distributed graphics system in which a minicomputer and a powerful large computer share the work. The most versatile type of distributed system is an intelligent satellite system in which the minicomputer is programmable by the application user and can do most of the work while the large remote machine is used for difficult computations. At New York University, the hardware was configured from available equipment. The level of system intelligence resulted almost completely from software development. Unlike previous work with intelligent satellites, the resulting system had system control centered in the satellite. It also had the ability to reconfigure software during realtime operation. The design of the system was done at a very high level using set theoretic language. The specification clearly illustrated processor boundaries and interfaces. The high-level specification also produced a compact, machine-independent virtual graphics data structure for picture representation. The software was written in a systems implementation language; thus, only one set of programs was needed for both machines. A user can program both machines in a single language. Tests of the system with an application program indicate that is has very high potential. A major result of this work is the demonstration that a gigantic investment in new hardware is not necessary for computing facilities interested in graphics.

  4. Turtle Graphics implementation using a graphical dataflow programming approach

    OpenAIRE

    Lovejoy, Robert Steven

    1992-01-01

    Approved for public release; distribution is unlimited This thesis expands the concepts of object-oriented programming to implement a visual dataflow programming language. The main thrust of this research is to develop a functional prototype language, based upon the Turtle Graphics tool provided by LOGO programming language, for children to develop both their problem solving skills as well as their general programming skills. The language developed for this thesis was implemented in the...

  5. The PC graphics handbook

    CERN Document Server

    Sanchez, Julio

    2003-01-01

    Part I - Graphics Fundamentals PC GRAPHICS OVERVIEW History and Evolution Short History of PC Video PS/2 Video Systems SuperVGA Graphics Coprocessors and Accelerators Graphics Applications State-of-the-Art in PC Graphics 3D Application Programming Interfaces POLYGONAL MODELING Vector and Raster Data Coordinate Systems Modeling with Polygons IMAGE TRANSFORMATIONS Matrix-based Representations Matrix Arithmetic 3D Transformations PROGRAMMING MATRIX TRANSFORMATIONS Numeric Data in Matrix Form Array Processing PROJECTIONS AND RENDERING Perspective The Rendering Pipeline LIGHTING AND SHADING Lightin

  6. Graphics gems II

    CERN Document Server

    Arvo, James

    1991-01-01

    Graphics Gems II is a collection of articles shared by a diverse group of people that reflect ideas and approaches in graphics programming which can benefit other computer graphics programmers.This volume presents techniques for doing well-known graphics operations faster or easier. The book contains chapters devoted to topics on two-dimensional and three-dimensional geometry and algorithms, image processing, frame buffer techniques, and ray tracing techniques. The radiosity approach, matrix techniques, and numerical and programming techniques are likewise discussed.Graphics artists and comput

  7. Graphical Models with R

    DEFF Research Database (Denmark)

    Højsgaard, Søren; Edwards, David; Lauritzen, Steffen

    Graphical models in their modern form have been around since the late 1970s and appear today in many areas of the sciences. Along with the ongoing developments of graphical models, a number of different graphical modeling software programs have been written over the years. In recent years many...... of these software developments have taken place within the R community, either in the form of new packages or by providing an R ingerface to existing software. This book attempts to give the reader a gentle introduction to graphical modeling using R and the main features of some of these packages. In addition......, the book provides examples of how more advanced aspects of graphical modeling can be represented and handled within R. Topics covered in the seven chapters include graphical models for contingency tables, Gaussian and mixed graphical models, Bayesian networks and modeling high dimensional data...

  8. THERAPIE - THErmix-RAps-Plot-InterfacE. A graphic software for representation of THERMIX-2D results with the interactive plot program RAPS

    International Nuclear Information System (INIS)

    Duensing, P.; Jahn, W.; Rehm, W.

    1986-09-01

    The performance of safety analyses for gas-cooled high temperature reactor power plants requires efficient plot codes for the evaluation and representation of computer results. The report describes the coupling between the thermodynamic simulation code THERMIX and the graphic plot code RAPS via the interface program THERAPIE. Especially the structure and the handling of the interface program are explained as well as the dialogue with the plot code. Further options of the colour graphic system are demonstrated for the representation of temperature distributions in components of HTR concepts (HTR-500). (orig.) [de

  9. Simulation of the «COSMONAUT-ROBOT» System Interaction on the Lunar Surface Based on Methods of Machine Vision and Computer Graphics

    Science.gov (United States)

    Kryuchkov, B. I.; Usov, V. M.; Chertopolokhov, V. A.; Ronzhin, A. L.; Karpov, A. A.

    2017-05-01

    Extravehicular activity (EVA) on the lunar surface, necessary for the future exploration of the Moon, involves extensive use of robots. One of the factors of safe EVA is a proper interaction between cosmonauts and robots in extreme environments. This requires a simple and natural man-machine interface, e.g. multimodal contactless interface based on recognition of gestures and cosmonaut's poses. When travelling in the "Follow Me" mode (master/slave), a robot uses onboard tools for tracking cosmonaut's position and movements, and on the basis of these data builds its itinerary. The interaction in the system "cosmonaut-robot" on the lunar surface is significantly different from that on the Earth surface. For example, a man, dressed in a space suit, has limited fine motor skills. In addition, EVA is quite tiring for the cosmonauts, and a tired human being less accurately performs movements and often makes mistakes. All this leads to new requirements for the convenient use of the man-machine interface designed for EVA. To improve the reliability and stability of human-robot communication it is necessary to provide options for duplicating commands at the task stages and gesture recognition. New tools and techniques for space missions must be examined at the first stage of works in laboratory conditions, and then in field tests (proof tests at the site of application). The article analyzes the methods of detection and tracking of movements and gesture recognition of the cosmonaut during EVA, which can be used for the design of human-machine interface. A scenario for testing these methods by constructing a virtual environment simulating EVA on the lunar surface is proposed. Simulation involves environment visualization and modeling of the use of the "vision" of the robot to track a moving cosmonaut dressed in a spacesuit.

  10. Use of computer graphics simulation for teaching of flexible sigmoidoscopy.

    Science.gov (United States)

    Baillie, J; Jowell, P; Evangelou, H; Bickel, W; Cotton, P

    1991-05-01

    The concept of simulation training in endoscopy is now well-established. The systems currently under development employ either computer graphics simulation or interactive video technology; each has its strengths and weaknesses. A flexible sigmoidoscopy training device has been designed which uses graphic routines--such as object oriented programming and double buffering--in entirely new ways. These programming techniques compensate for the limitations of currently available desk-top microcomputers. By boosting existing computer 'horsepower' with next generation coprocessors and sophisticated graphics tools such as intensity interpolation (Gouraud shading), the realism of computer simulation of flexible sigmoidoscopy is being greatly enhanced. The computer program has teaching and scoring capabilities, making it a truly interactive system. Use has been made of this ability to record, grade and store each trainee encounter in computer memory as part of a multi-center, prospective trial of simulation training being conducted currently in the USA. A new input device, a dummy endoscope, has been designed that allows application of variable resistance to the insertion tube. This greatly enhances tactile feedback, such as resistance during looping. If carefully designed trials show that computer simulation is an attractive and effective training tool, it is expected that this technology will evolve rapidly and be made widely available to trainee endoscopists.

  11. Interactive Data Visualization for HIV Cohorts: Leveraging Data Exchange Standards to Share and Reuse Research Tools.

    Directory of Open Access Journals (Sweden)

    Meridith Blevins

    Full Text Available To develop and disseminate tools for interactive visualization of HIV cohort data.If a picture is worth a thousand words, then an interactive video, composed of a long string of pictures, can produce an even richer presentation of HIV population dynamics. We developed an HIV cohort data visualization tool using open-source software (R statistical language. The tool requires that the data structure conform to the HIV Cohort Data Exchange Protocol (HICDEP, and our implementation utilized Caribbean, Central and South America network (CCASAnet data.This tool currently presents patient-level data in three classes of plots: (1 Longitudinal plots showing changes in measurements viewed alongside event probability curves allowing for simultaneous inspection of outcomes by relevant patient classes. (2 Bubble plots showing changes in indicators over time allowing for observation of group level dynamics. (3 Heat maps of levels of indicators changing over time allowing for observation of spatial-temporal dynamics. Examples of each class of plot are given using CCASAnet data investigating trends in CD4 count and AIDS at antiretroviral therapy (ART initiation, CD4 trajectories after ART initiation, and mortality.We invite researchers interested in this data visualization effort to use these tools and to suggest new classes of data visualization. We aim to contribute additional shareable tools in the spirit of open scientific collaboration and hope that these tools further the participation in open data standards like HICDEP by the HIV research community.

  12. Field scale modeling to estimate phosphorus and sediment load reductions using a newly developed graphical user interface for soil and water assessment tool

    Science.gov (United States)

    Streams throughout the North Canadian River watershed in northwest Oklahoma, USA have elevated levels of nutrients and sediment. SWAT (Soil and Water Assessment Tool) was used to identify areas that likely contributed disproportionate amounts of phosphorus (P) and sediment to Lake Overholser, the re...

  13. User interface graphically improves generator AL diagnostics

    International Nuclear Information System (INIS)

    Gray, R.F.; King, I.J.

    1991-01-01

    In April of 1990, the recently developed Diagnostic Graphical User Interface (DGUI) was installed at a large nuclear power plant in the midwestern United States. Since 1988, the power plant has been using the Generator Artificial Intelligence Diagnostics (GenAID) System, which provides online diagnostic capability for the generator and generator auxiliaries through a plant data center (PDC) and communication link to the diagnostic operations center (DOC) in Orlando, Florida. The enhanced system provides the power plant control room operator with a comprehensive tool to understand and better utilize the information provided by the existing knowledge bases. This paper represents a significant improvement over existing technology by providing the power plant control room operator with the capability of interacting directly with the diagnostic system

  14. Optical design teaching by computing graphic methods

    Science.gov (United States)

    Vazquez-Molini, D.; Muñoz-Luna, J.; Fernandez-Balbuena, A. A.; Garcia-Botella, A.; Belloni, P.; Alda, J.

    2012-10-01

    One of the key challenges in the teaching of Optics is that students need to know not only the math of the optical design, but also, and more important, to grasp and understand the optics in a three-dimensional space. Having a clear image of the problem to solve is the first step in order to begin to solve that problem. Therefore to achieve that the students not only must know the equation of refraction law but they have also to understand how the main parameters of this law are interacting among them. This should be a major goal in the teaching course. Optical graphic methods are a valuable tool in this way since they have the advantage of visual information and the accuracy of a computer calculation.

  15. Qualitative interaction trees: A tool to identify qualitative treatment-subgroup interactions

    NARCIS (Netherlands)

    Dusseldorp, E.; Mechelen, I. van

    2014-01-01

    When two alternative treatments (A and B) are available, some subgroup of patients may display a better outcome with treatment A than with B, whereas for another subgroup, the reverse may be true. If this is the case, a qualitative (i.e., disordinal) treatment-subgroup interaction is present. Such

  16. MARs Tools for Interactive ANalysis (MARTIAN): Google Maps Tools for Visual Exploration of Geophysical Modeling on Mars

    Science.gov (United States)

    Dimitrova, L. L.; Haines, M.; Holt, W. E.; Schultz, R. A.; Richard, G.; Haines, A. J.

    2006-12-01

    Interactive maps of surface-breaking faults and stress models on Mars provide important tools to engage undergraduate students, educators, and scientists with current geological and geophysical research. We have developed a map based on the Google Maps API -- an Internet based tool combining DHTML and AJAX, -- which allows very large maps to be viewed over the World Wide Web. Typically, small portions of the maps are downloaded as needed, rather than the entire image at once. This set-up enables relatively fast access for users with low bandwidth. Furthermore, Google Maps provides an extensible interactive interface making it ideal for visualizing multiple data sets at the user's choice. The Google Maps API works primarily with data referenced to latitudes and longitudes, which is then mapped in Mercator projection only. We have developed utilities for general cylindrical coordinate systems by converting these coordinates into equivalent Mercator projection before including them on the map. The MARTIAN project is available at http://rock.geo.sunysb.edu/~holt/Mars/MARTIAN/. We begin with an introduction to the Martian surface using a topography model. Faults from several datasets are classified by type (extension vs. compression) and by time epoch. Deviatoric stresses due to gravitational potential energy differences, calculated from the topography and crustal thickness, can be overlain. Several quantitative measures for the fit of the stress field to the faults are also included. We provide introductory text and exercises spanning a range of topics: how are faults identified, what stress is and how it relates to faults, what gravitational potential energy is and how variations in it produce stress, how the models are created, and how these models can be evaluated and interpreted. The MARTIAN tool is used at Stony Brook University in GEO 310: Introduction to Geophysics, a class geared towards junior and senior geosciences majors. Although this project is in its

  17. ReACT!: An Interactive Educational Tool for AI Planning for Robotics

    Science.gov (United States)

    Dogmus, Zeynep; Erdem, Esra; Patogulu, Volkan

    2015-01-01

    This paper presents ReAct!, an interactive educational tool for artificial intelligence (AI) planning for robotics. ReAct! enables students to describe robots' actions and change in dynamic domains without first having to know about the syntactic and semantic details of the underlying formalism, and to solve planning problems using…

  18. Laser Pointers: Low-Cost, Low-Tech Innovative, Interactive Instruction Tool

    Science.gov (United States)

    Zdravkovska, Nevenka; Cech, Maureen; Beygo, Pinar; Kackley, Bob

    2010-01-01

    This paper discusses the use of laser pointers at the Engineering and Physical Sciences Library, University of Maryland, College Park, as a personal response system (PRS) tool to encourage student engagement in and interactivity with one-shot, lecture-based information literacy sessions. Unlike more sophisticated personal response systems like…

  19. A Survey of Educational Games as Interaction Design Tools for Affective Learning: Thematic Analysis Taxonomy

    Science.gov (United States)

    Yusoff, Zarwina; Kamsin, Amirrudin; Shamshirband, Shahaboddin; Chronopoulos, Anthony T.

    2018-01-01

    A Computer game is the new platform in generating learning experiences for educational purposes. There are many educational games that have been used as an interaction design tool in a learning environment to enhance students learning outcomes. However, research also claims that playing video games can have a negative impact on student behavior,…

  20. The simplified interaction tool for efficient and accurate underwater shock analysis of naval ships

    NARCIS (Netherlands)

    Aanhold, J.E. van; Trouwborst, W.; Vaders, J.A.A.

    2014-01-01

    In order to satisfy the need for good quality UNDEX response estimates of naval ships, TNO developed the Simplified Interaction Tool (SIT) for underwater shock analysis. The SIT is a module of user routines linked to LS-DYNA, which generates the UNDEX loading on the wet hull of a 3D finite element

  1. Augmented reality as a tool for linguistic research: Intercepting and manipulating multimodal interaction

    OpenAIRE

    Pitsch, Karola; Neumann, Alexander; Schnier, Christian; Hermann, Thomas

    2013-01-01

    We suggest that an Augmented Reality (AR) system for coupled interaction partners provides a new tool for linguistic research that allows to manipulate the coparticipants’ real-time perception and action. It encompasses novel facilities for recording heterogeneous sensor-rich data sets to be accessed in parallel with qualitative/manual and quantitative/computational methods.

  2. The graphics future in scientific applications

    International Nuclear Information System (INIS)

    Enderle, G.

    1982-01-01

    Computer graphics methods and tools are being used to a great extent in scientific research. The future development in this area will be influenced both by new hardware developments and by software advances. On the hardware sector, the development of the raster technology will lead to the increased use of colour workstations with more local processing power. Colour hardcopy devices for creating plots, slides, or movies will be available at a lower price than today. The first real 3D-workstations appear on the marketplace. One of the main activities on the software sector is the standardization of computer graphics systems, graphical files, and device interfaces. This will lead to more portable graphical application programs and to a common base for computer graphics education. (orig.)

  3. Haplowebs as a graphical tool for delimiting species: a revival of Doyle's "field for recombination" approach and its application to the coral genus Pocillopora in Clipperton.

    Science.gov (United States)

    Flot, Jean-François; Couloux, Arnaud; Tillier, Simon

    2010-11-30

    Usual methods for inferring species boundaries from molecular sequence data rely either on gene trees or on population genetic analyses. Another way of delimiting species, based on a view of species as "fields for recombination" (FFRs) characterized by mutual allelic exclusivity, was suggested in 1995 by Doyle. Here we propose to use haplowebs (haplotype networks with additional connections between haplotypes found co-occurring in heterozygous individuals) to visualize and delineate single-locus FFRs (sl-FFRs). Furthermore, we introduce a method to quantify the reliability of putative species boundaries according to the number of independent markers that support them, and illustrate this approach with a case study of taxonomically difficult corals of the genus Pocillopora collected around Clipperton Island (far eastern Pacific). One haploweb built from intron sequences of the ATP synthase β subunit gene revealed the presence of two sl-FFRs among our 74 coral samples, whereas a second one built from ITS sequences turned out to be composed of four sl-FFRs. As a third independent marker, we performed a combined analysis of two regions of the mitochondrial genome: since haplowebs are not suited to analyze non-recombining markers, individuals were sorted into four haplogroups according to their mitochondrial sequences. Among all possible bipartitions of our set of samples, thirteen were supported by at least one molecular dataset, none by two and only one by all three datasets: this congruent pattern obtained from independent nuclear and mitochondrial markers indicates that two species of Pocillopora are present in Clipperton. Our approach builds on Doyle's method and extends it by introducing an intuitive, user-friendly graphical representation and by proposing a conceptual framework to analyze and quantify the congruence between sl-FFRs obtained from several independent markers. Like delineation methods based on population-level statistical approaches, our method can

  4. Haplowebs as a graphical tool for delimiting species: a revival of Doyle's "field for recombination" approach and its application to the coral genus Pocillopora in Clipperton

    Directory of Open Access Journals (Sweden)

    Flot Jean-François

    2010-11-01

    Full Text Available Abstract Background Usual methods for inferring species boundaries from molecular sequence data rely either on gene trees or on population genetic analyses. Another way of delimiting species, based on a view of species as "fields for recombination" (FFRs characterized by mutual allelic exclusivity, was suggested in 1995 by Doyle. Here we propose to use haplowebs (haplotype networks with additional connections between haplotypes found co-occurring in heterozygous individuals to visualize and delineate single-locus FFRs (sl-FFRs. Furthermore, we introduce a method to quantify the reliability of putative species boundaries according to the number of independent markers that support them, and illustrate this approach with a case study of taxonomically difficult corals of the genus Pocillopora collected around Clipperton Island (far eastern Pacific. Results One haploweb built from intron sequences of the ATP synthase β subunit gene revealed the presence of two sl-FFRs among our 74 coral samples, whereas a second one built from ITS sequences turned out to be composed of four sl-FFRs. As a third independent marker, we performed a combined analysis of two regions of the mitochondrial genome: since haplowebs are not suited to analyze non-recombining markers, individuals were sorted into four haplogroups according to their mitochondrial sequences. Among all possible bipartitions of our set of samples, thirteen were supported by at least one molecular dataset, none by two and only one by all three datasets: this congruent pattern obtained from independent nuclear and mitochondrial markers indicates that two species of Pocillopora are present in Clipperton. Conclusions Our approach builds on Doyle's method and extends it by introducing an intuitive, user-friendly graphical representation and by proposing a conceptual framework to analyze and quantify the congruence between sl-FFRs obtained from several independent markers. Like delineation methods based on

  5. Deterministic Graphical Games Revisited

    DEFF Research Database (Denmark)

    Andersson, Daniel; Hansen, Kristoffer Arnsfelt; Miltersen, Peter Bro

    2008-01-01

    We revisit the deterministic graphical games of Washburn. A deterministic graphical game can be described as a simple stochastic game (a notion due to Anne Condon), except that we allow arbitrary real payoffs but disallow moves of chance. We study the complexity of solving deterministic graphical...... games and obtain an almost-linear time comparison-based algorithm for computing an equilibrium of such a game. The existence of a linear time comparison-based algorithm remains an open problem....

  6. EASI graphics - Version II

    International Nuclear Information System (INIS)

    Allensworth, J.A.

    1984-04-01

    EASI (Estimate of Adversary Sequence Interruption) is an analytical technique for measuring the effectiveness of physical protection systems. EASI Graphics is a computer graphics extension of EASI which provides a capability for performing sensitivity and trade-off analyses of the parameters of a physical protection system. This document reports on the implementation of the Version II of EASI Graphics and illustrates its application with some examples. 5 references, 15 figures, 6 tables

  7. Interactive, technology-enhanced self-regulated learning tools in healthcare education: a literature review.

    Science.gov (United States)

    Petty, Julia

    2013-01-01

    Learning technology is increasingly being implemented for programmes of blended learning within nurse education. With a growing emphasis on self-directed study particularly in post-basic education, there is a need for learners to be guided in their learning away from practice and limited classroom time. Technology-enabled (TE) tools which engage learners actively can play a part in this. The effectiveness and value of interactive TE learning strategies within healthcare is the focus of this paper. To identify literature that explores the effectiveness of interactive, TE tools on knowledge acquisition and learner satisfaction within healthcare with a view to evaluating their use for post-basic nurse education. A Literature Review was performed focusing on papers exploring the comparative value and perceived benefit of TE tools compared to traditional modes of learning within healthcare. The Databases identified as most suitable due to their relevance to healthcare were accessed through EBSCOhost. Primary, Boolean and advanced searches on key terms were undertaken. Inclusion and exclusion criteria were applied which resulted in a final selection of 11 studies for critique. Analysis of the literature found that knowledge acquisition in most cases was enhanced and measured learner satisfaction was generally positive for interactive, self-regulated TE tools. However, TE education may not suit all learners and this is critiqued in the light of the identified limitations. Interactive self regulation and/or testing can be a valuable learning strategy that can be incorporated into self-directed programmes of study for post-registration learners. Whilst acknowledging the learning styles not suited to such tools, the concurrent use of self-directed TE tools with those learning strategies necessitating a more social presence can work together to support enhancement of knowledge required to deliver rationale for nursing practice. Copyright © 2012 Elsevier Ltd. All rights

  8. Graphical Models with R

    CERN Document Server

    Højsgaard, Søren; Lauritzen, Steffen

    2012-01-01

    Graphical models in their modern form have been around since the late 1970s and appear today in many areas of the sciences. Along with the ongoing developments of graphical models, a number of different graphical modeling software programs have been written over the years. In recent years many of these software developments have taken place within the R community, either in the form of new packages or by providing an R interface to existing software. This book attempts to give the reader a gentle introduction to graphical modeling using R and the main features of some of these packages. In add

  9. The computer graphics metafile

    CERN Document Server

    Henderson, LR; Shepherd, B; Arnold, D B

    1990-01-01

    The Computer Graphics Metafile deals with the Computer Graphics Metafile (CGM) standard and covers topics ranging from the structure and contents of a metafile to CGM functionality, metafile elements, and real-world applications of CGM. Binary Encoding, Character Encoding, application profiles, and implementations are also discussed. This book is comprised of 18 chapters divided into five sections and begins with an overview of the CGM standard and how it can meet some of the requirements for storage of graphical data within a graphics system or application environment. The reader is then intr

  10. The computer graphics interface

    CERN Document Server

    Steinbrugge Chauveau, Karla; Niles Reed, Theodore; Shepherd, B

    2014-01-01

    The Computer Graphics Interface provides a concise discussion of computer graphics interface (CGI) standards. The title is comprised of seven chapters that cover the concepts of the CGI standard. Figures and examples are also included. The first chapter provides a general overview of CGI; this chapter covers graphics standards, functional specifications, and syntactic interfaces. Next, the book discusses the basic concepts of CGI, such as inquiry, profiles, and registration. The third chapter covers the CGI concepts and functions, while the fourth chapter deals with the concept of graphic obje

  11. Evaluating virtual hosted desktops for graphics-intensive astronomy

    Science.gov (United States)

    Meade, B. F.; Fluke, C. J.

    2018-04-01

    Visualisation of data is critical to understanding astronomical phenomena. Today, many instruments produce datasets that are too big to be downloaded to a local computer, yet many of the visualisation tools used by astronomers are deployed only on desktop computers. Cloud computing is increasingly used to provide a computation and simulation platform in astronomy, but it also offers great potential as a visualisation platform. Virtual hosted desktops, with graphics processing unit (GPU) acceleration, allow interactive, graphics-intensive desktop applications to operate co-located with astronomy datasets stored in remote data centres. By combining benchmarking and user experience testing, with a cohort of 20 astronomers, we investigate the viability of replacing physical desktop computers with virtual hosted desktops. In our work, we compare two Apple MacBook computers (one old and one new, representing hardware and opposite ends of the useful lifetime) with two virtual hosted desktops: one commercial (Amazon Web Services) and one in a private research cloud (the Australian NeCTAR Research Cloud). For two-dimensional image-based tasks and graphics-intensive three-dimensional operations - typical of astronomy visualisation workflows - we found that benchmarks do not necessarily provide the best indication of performance. When compared to typical laptop computers, virtual hosted desktops can provide a better user experience, even with lower performing graphics cards. We also found that virtual hosted desktops are equally simple to use, provide greater flexibility in choice of configuration, and may actually be a more cost-effective option for typical usage profiles.

  12. Patient-oriented interactive E-health tools on U.S. hospital Web sites.

    Science.gov (United States)

    Huang, Edgar; Chang, Chiu-Chi Angela

    2012-01-01

    The purpose of this study is to provide evidence for strategic planning regarding e-health development in U.S. hospitals. A content analysis of a representative sample of the U.S. hospital Web sites has revealed how U.S. hospitals have taken advantage of the 21 patient-oriented interactive tools identified in this study. Significant gaps between various types of hospitals have also been found. It is concluded that although the majority of the U.S. hospitals have adopted traditional functional tools, they need to make significant inroad in implementing the core e-business tools to serve their patients/users, making their Web sites more efficient marketing tools.

  13. Interactive and Approachable Web-Based Tools for Exploring Global Geophysical Data Records

    Science.gov (United States)

    Croteau, M. J.; Nerem, R. S.; Merrifield, M. A.; Thompson, P. R.; Loomis, B. D.; Wiese, D. N.; Zlotnicki, V.; Larson, J.; Talpe, M.; Hardy, R. A.

    2017-12-01

    Making global and regional data accessible and understandable for non-experts can be both challenging and hazardous. While data products are often developed with end users in mind, the ease of use of these data can vary greatly. Scientists must take care to provide detailed guides for how to use data products to ensure users are not incorrectly applying data to their problem. For example, terrestrial water storage data from the Gravity Recovery and Climate Experiment (GRACE) satellite mission is notoriously difficult for non-experts to access and correctly use. However, allowing these data to be easily accessible to scientists outside the GRACE community is desirable because this would allow that data to see much wider-spread use. We have developed a web-based interactive mapping and plotting tool that provides easy access to geophysical data. This work presents an intuitive method for making such data widely accessible to experts and non-experts alike, making the data approachable and ensuring proper use of the data. This tool has proven helpful to experts by providing fast and detailed access to the data. Simultaneously, the tool allows non-experts to gain familiarity with the information contained in the data and access to that information for both scientific studies and public use. In this presentation, we discuss the development of this tool and application to both GRACE and ocean altimetry satellite missions, and demonstrate the capabilities of the tool. Focusing on the data visualization aspects of the tool, we showcase our integrations of the Mapbox API and the D3.js data-driven web document framework. We then explore the potential of these tools in other web-based visualization projects, and how incorporation of such tools into science can improve the presentation of research results. We demonstrate how the development of an interactive and exploratory resource can enable further layers of exploratory and scientific discovery.

  14. Legal assessment tool (LAT): an interactive tool to address privacy and data protection issues for data sharing.

    Science.gov (United States)

    Kuchinke, Wolfgang; Krauth, Christian; Bergmann, René; Karakoyun, Töresin; Woollard, Astrid; Schluender, Irene; Braasch, Benjamin; Eckert, Martin; Ohmann, Christian

    2016-07-07

    In an unprecedented rate data in the life sciences is generated and stored in many different databases. An ever increasing part of this data is human health data and therefore falls under data protected by legal regulations. As part of the BioMedBridges project, which created infrastructures that connect more than 10 ESFRI research infrastructures (RI), the legal and ethical prerequisites of data sharing were examined employing a novel and pragmatic approach. We employed concepts from computer science to create legal requirement clusters that enable legal interoperability between databases for the areas of data protection, data security, Intellectual Property (IP) and security of biosample data. We analysed and extracted access rules and constraints from all data providers (databases) involved in the building of data bridges covering many of Europe's most important databases. These requirement clusters were applied to five usage scenarios representing the data flow in different data bridges: Image bridge, Phenotype data bridge, Personalised medicine data bridge, Structural data bridge, and Biosample data bridge. A matrix was built to relate the important concepts from data protection regulations (e.g. pseudonymisation, identifyability, access control, consent management) with the results of the requirement clusters. An interactive user interface for querying the matrix for requirements necessary for compliant data sharing was created. To guide researchers without the need for legal expert knowledge through legal requirements, an interactive tool, the Legal Assessment Tool (LAT), was developed. LAT provides researchers interactively with a selection process to characterise the involved types of data and databases and provides suitable requirements and recommendations for concrete data access and sharing situations. The results provided by LAT are based on an analysis of the data access and sharing conditions for different kinds of data of major databases in Europe

  15. 3D Graphics with Spreadsheets

    Directory of Open Access Journals (Sweden)

    Jan Benacka

    2009-06-01

    Full Text Available In the article, the formulas for orthographic parallel projection of 3D bodies on computer screen are derived using secondary school vector algebra. The spreadsheet implementation is demonstrated in six applications that project bodies with increasing intricacy – a convex body (cube with non-solved visibility, convex bodies (cube, chapel with solved visibility, a coloured convex body (chapel with solved visibility, and a coloured non-convex body (church with solved visibility. The projections are revolvable in horizontal and vertical plane, and they are changeable in size. The examples show an unusual way of using spreadsheets as a 3D computer graphics tool. The applications can serve as a simple introduction to the general principles of computer graphics, to the graphics with spreadsheets, and as a tool for exercising stereoscopic vision. The presented approach is usable at visualising 3D scenes within some topics of secondary school curricula as solid geometry (angles and distances of lines and planes within simple bodies or analytic geometry in space (angles and distances of lines and planes in E3, and even at university level within calculus at visualising graphs of z = f(x,y functions. Examples are pictured.

  16. You talkin' to me? Interactive playback is a powerful yet underused tool in animal communication research.

    Science.gov (United States)

    King, Stephanie L

    2015-07-01

    Over the years, playback experiments have helped further our understanding of the wonderful world of animal communication. They have provided fundamental insights into animal behaviour and the function of communicative signals in numerous taxa. As important as these experiments are, however, there is strong evidence to suggest that the information conveyed in a signal may only have value when presented interactively. By their very nature, signalling exchanges are interactive and therefore, an interactive playback design is a powerful tool for examining the function of such exchanges. While researchers working on frog and songbird vocal interactions have long championed interactive playback, it remains surprisingly underused across other taxa. The interactive playback approach is not limited to studies of acoustic signalling, but can be applied to other sensory modalities, including visual, chemical and electrical communication. Here, I discuss interactive playback as a potent yet underused technique in the field of animal behaviour. I present a concise review of studies that have used interactive playback thus far, describe how it can be applied, and discuss its limitations and challenges. My hope is that this review will result in more scientists applying this innovative technique to their own study subjects, as a means of furthering our understanding of the function of signalling interactions in animal communication systems. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  17. Future of motion graphics and particle systems

    OpenAIRE

    Warambo, Bryan

    2012-01-01

    The purpose of this research is to study the use of particle systems in motion graphics, which is known to be the most popular graphics tool for multiple animated elements. It is known to be a procedural animation because as the emitter builds up more particles are formed to create a motion effect. At the same time exploring the future of motion graphics and Particle systems connection and the relevance it has in terms of longevity in being a major post-production element in digital media. Th...

  18. Programming Interactivity

    CERN Document Server

    Noble, Joshua

    2012-01-01

    Ready to create rich interactive experiences with your artwork, designs, or prototypes? This is the ideal place to start. With this hands-on guide, you'll explore several themes in interactive art and design-including 3D graphics, sound, physical interaction, computer vision, and geolocation-and learn the basic programming and electronics concepts you need to implement them. No previous experience is necessary. You'll get a complete introduction to three free tools created specifically for artists and designers: the Processing programming language, the Arduino microcontroller, and the openFr

  19. The missing graphical user interface for genomics.

    Science.gov (United States)

    Schatz, Michael C

    2010-01-01

    dynamic graphical menus, and the results are displayed in intuitive plots and summaries that encourage interactive workflows and the exploration of hypotheses. The underlying data analysis tools can be almost any piece of software, written in any language, but all their complexity is neatly hidden inside of Galaxy, allowing users to focus on scientific rather than technical questions.

  20. FGB: A Graphical and Haptic User Interface for Creating Graphical, Haptic User Interfaces

    International Nuclear Information System (INIS)

    ANDERSON, THOMAS G.; BRECKENRIDGE, ARTHURINE; DAVIDSON, GEORGE S.

    1999-01-01

    The emerging field of haptics represents a fundamental change in human-computer interaction (HCI), and presents solutions to problems that are difficult or impossible to solve with a two-dimensional, mouse-based interface. To take advantage of the potential of haptics, however, innovative interaction techniques and programming environments are needed. This paper describes FGB (FLIGHT GHUI Builder), a programming tool that can be used to create an application specific graphical and haptic user interface (GHUI). FGB is itself a graphical and haptic user interface with which a programmer can intuitively create and manipulate components of a GHUI in real time in a graphical environment through the use of a haptic device. The programmer can create a GHUI without writing any programming code. After a user interface is created, FGB writes the appropriate programming code to a file, using the FLIGHT API, to recreate what the programmer created in the FGB interface. FGB saves programming time and increases productivity, because a programmer can see the end result as it is created, and FGB does much of the programming itself. Interestingly, as FGB was created, it was used to help build itself. The further FGB was in its development, the more easily and quickly it could be used to create additional functionality and improve its own design. As a finished product, FGB can be used to recreate itself in much less time than it originally required, and with much less programming. This paper describes FGB's GHUI components, the techniques used in the interface, how the output code is created, where programming additions and modifications should be placed, and how it can be compared to and integrated with existing API's such as MFC and Visual C++, OpenGL, and GHOST

  1. Mathematics for computer graphics

    CERN Document Server

    Vince, John

    2006-01-01

    Helps you understand the mathematical ideas used in computer animation, virtual reality, CAD, and other areas of computer graphics. This work also helps you to rediscover the mathematical techniques required to solve problems and design computer programs for computer graphic applications

  2. Graphic Communications. Curriculum Guide.

    Science.gov (United States)

    North Dakota State Board for Vocational Education, Bismarck.

    This guide provides the basic foundation to develop a one-semester course based on the cluster concept, graphic communications. One of a set of six guides for an industrial arts curriculum at the junior high school level, it suggests exploratory experiences designed to (1) develop an awareness and understanding of the drafting and graphic arts…

  3. GIS-based interactive tool to map the advent of world conquerors

    Science.gov (United States)

    Lakkaraju, Mahesh

    The objective of this thesis is to show the scale and extent of some of the greatest empires the world has ever seen. This is a hybrid project between the GIS based interactive tool and the web-based JavaScript tool. This approach lets the students learn effectively about the emperors themselves while understanding how long and far their empires spread. In the GIS based tool, a map is displayed with various points on it, and when a user clicks on one point, the relevant information of what happened at that particular place is displayed. Apart from this information, users can also select the interactive animation button and can walk through a set of battles in chronological order. As mentioned, this uses Java as the main programming language, and MOJO (Map Objects Java Objects) provided by ESRI. MOJO is very effective as its GIS related features can be included in the application itself. This app. is a simple tool and has been developed for university or high school level students. D3.js is an interactive animation and visualization platform built on the Javascript framework. Though HTML5, CSS3, Javascript and SVG animations can be used to derive custom animations, this tool can help bring out results with less effort and more ease of use. Hence, it has become the most sought after visualization tool for multiple applications. D3.js has provided a map-based visualization feature so that we can easily display text-based data in a map-based interface. To draw the map and the points on it, D3.js uses data rendered in TOPO JSON format. The latitudes and longitudes can be provided, which are interpolated into the Map svg. One of the main advantages of doing it this way is that more information is retained when we use a visual medium.

  4. Efficient analysis using custom interactive visualization tools at a Superfund site

    International Nuclear Information System (INIS)

    Williams, G.; Durham, L.

    1992-01-01

    Custom visualization analysis programs were developed and used to analyze contaminant transport calculations from a three-dimensional numerical groundwater flow model developed for a Department of Energy Superfund site. The site hydrogeology, which is highly heterogenous, includes both fractured limestone and dolomite and alluvium deposits. Three-dimensional interactive visualization techniques were used to understand and analyze the three-dimensional, double-porosity modeling results. A graphical object oriented programming environment was applied to efficiently develop custom visualization programs in a coarse-grained data structure language. Comparisons were made, using the results from the three-dimensional, finite-difference model, between traditional two-dimensional analyses (contour and vector plots) and interactive three-dimensional techniques. Subjective comparison areas include the accuracy of analysis, the ability to understand the results of three-dimensional contaminant transport simulation, and the capability to transmit the results of the analysis to the project management. In addition, a quantitative comparison was made on the time required to develop a thorough analysis of the modeling results. The conclusions from the comparative study showed that the visualization analysis provided an increased awareness of the contaminant transport mechanisms, provided new insights into contaminant migration, and resulted in a significant time savings

  5. Efficient analysis using custom interactive visualization tools at a Superfund site

    Energy Technology Data Exchange (ETDEWEB)

    Williams, G. [Northwestern Univ., Evanston, IL (United States); Durham, L. [Argonne National Lab., IL (United States)

    1992-12-01

    Custom visualization analysis programs were developed and used to analyze contaminant transport calculations from a three-dimensional numerical groundwater flow model developed for a Department of Energy Superfund site. The site hydrogeology, which is highly heterogenous, includes both fractured limestone and dolomite and alluvium deposits. Three-dimensional interactive visualization techniques were used to understand and analyze the three-dimensional, double-porosity modeling results. A graphical object oriented programming environment was applied to efficiently develop custom visualization programs in a coarse-grained data structure language. Comparisons were made, using the results from the three-dimensional, finite-difference model, between traditional two-dimensional analyses (contour and vector plots) and interactive three-dimensional techniques. Subjective comparison areas include the accuracy of analysis, the ability to understand the results of three-dimensional contaminant transport simulation, and the capability to transmit the results of the analysis to the project management. In addition, a quantitative comparison was made on the time required to develop a thorough analysis of the modeling results. The conclusions from the comparative study showed that the visualization analysis provided an increased awareness of the contaminant transport mechanisms, provided new insights into contaminant migration, and resulted in a significant time savings.

  6. TreeQ-VISTA: An Interactive Tree Visualization Tool withFunctional Annotation Query Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Gu, Shengyin; Anderson, Iain; Kunin, Victor; Cipriano, Michael; Minovitsky, Simon; Weber, Gunther; Amenta, Nina; Hamann, Bernd; Dubchak,Inna

    2007-05-07

    Summary: We describe a general multiplatform exploratorytool called TreeQ-Vista, designed for presenting functional annotationsin a phylogenetic context. Traits, such as phenotypic and genomicproperties, are interactively queried from a relational database with auser-friendly interface which provides a set of tools for users with orwithout SQL knowledge. The query results are projected onto aphylogenetic tree and can be displayed in multiple color groups. A richset of browsing, grouping and query tools are provided to facilitatetrait exploration, comparison and analysis.Availability: The program,detailed tutorial and examples are available online athttp://genome-test.lbl.gov/vista/TreeQVista.

  7. GeneWiz browser: An Interactive Tool for Visualizing Sequenced Chromosomes

    DEFF Research Database (Denmark)

    Hallin, Peter Fischer; Stærfeldt, Hans Henrik; Rotenberg, Eva

    2009-01-01

    , standard atlases are pre-generated for all prokaryotic genomes available in GenBank, providing a fast overview of all available genomes, including recently deposited genome sequences. The tool is available online from http://www.cbs.dtu.dk/services/gwBrowser. [Supplemental material including interactive...... atlases is available online at http://www.cbs.dtu.dk/services/gwBrowser/suppl/]....... readability and increased functionality compared to other browsers. The tool allows the user to select the display of various genomic features, color setting and data ranges. Custom numerical data can be added to the plot, allowing for example visualization of gene expression and regulation data. Further...

  8. Vizic: A Jupyter-based interactive visualization tool for astronomical catalogs

    Science.gov (United States)

    Yu, W.; Carrasco Kind, M.; Brunner, R. J.

    2017-07-01

    The ever-growing datasets in observational astronomy have challenged scientists in many aspects, including an efficient and interactive data exploration and visualization. Many tools have been developed to confront this challenge. However, they usually focus on displaying the actual images or focus on visualizing patterns within catalogs in a predefined way. In this paper we introduce Vizic, a Python visualization library that builds the connection between images and catalogs through an interactive map of the sky region. Vizic visualizes catalog data over a custom background canvas using the shape, size and orientation of each object in the catalog. The displayed objects in the map are highly interactive and customizable comparing to those in the observation images. These objects can be filtered by or colored by their property values, such as redshift and magnitude. They also can be sub-selected using a lasso-like tool for further analysis using standard Python functions and everything is done from inside a Jupyter notebook. Furthermore, Vizic allows custom overlays to be appended dynamically on top of the sky map. We have initially implemented several overlays, namely, Voronoi, Delaunay, Minimum Spanning Tree and HEALPix grid layer, which are helpful for visualizing large-scale structure. All these overlays can be generated, added or removed interactively with just one line of code. The catalog data is stored in a non-relational database, and the interfaces have been developed in JavaScript and Python to work within Jupyter Notebook, which allows to create customizable widgets, user generated scripts to analyze and plot the data selected/displayed in the interactive map. This unique design makes Vizic a very powerful and flexible interactive analysis tool. Vizic can be adopted in variety of exercises, for example, data inspection, clustering analysis, galaxy alignment studies, outlier identification or just large scale visualizations.

  9. Implementing Lumberjacks and Black Swans Into Model-Based Tools to Support Human-Automation Interaction.

    Science.gov (United States)

    Sebok, Angelia; Wickens, Christopher D

    2017-03-01

    The objectives were to (a) implement theoretical perspectives regarding human-automation interaction (HAI) into model-based tools to assist designers in developing systems that support effective performance and (b) conduct validations to assess the ability of the models to predict operator performance. Two key concepts in HAI, the lumberjack analogy and black swan events, have been studied extensively. The lumberjack analogy describes the effects of imperfect automation on operator performance. In routine operations, an increased degree of automation supports performance, but in failure conditions, increased automation results in more significantly impaired performance. Black swans are the rare and unexpected failures of imperfect automation. The lumberjack analogy and black swan concepts have been implemented into three model-based tools that predict operator performance in different systems. These tools include a flight management system, a remotely controlled robotic arm, and an environmental process control system. Each modeling effort included a corresponding validation. In one validation, the software tool was used to compare three flight management system designs, which were ranked in the same order as predicted by subject matter experts. The second validation compared model-predicted operator complacency with empirical performance in the same conditions. The third validation compared model-predicted and empirically determined time to detect and repair faults in four automation conditions. The three model-based tools offer useful ways to predict operator performance in complex systems. The three tools offer ways to predict the effects of different automation designs on operator performance.

  10. PIMiner: A web tool for extraction of protein interactions from biomedical literature

    KAUST Repository

    Chowdhary, Rajesh

    2013-01-01

    Information on Protein Interactions (PIs) is valuable for biomedical research, but often lies buried in the scientific literature and cannot be readily retrieved. While much progress has been made over the years in extracting PIs from the literature using computational methods, there is a lack of free, public, user-friendly tools for the discovery of PIs. We developed an online tool for the extraction of PI relationships from PubMed-abstracts, which we name PIMiner. Protein pairs and the words that describe their interactions are reported by PIMiner so that new interactions can be easily detected within text. The interaction likelihood levels are reported too. The option to extract only specific types of interactions is also provided. The PIMiner server can be accessed through a web browser or remotely through a client\\'s command line. PIMiner can process 50,000 PubMed abstracts in approximately 7 min and thus appears suitable for large-scale processing of biological/biomedical literature. Copyright © 2013 Inderscience Enterprises Ltd.

  11. Development of a visual tool to analyze interactions in forums in an e-learning environment

    Directory of Open Access Journals (Sweden)

    Cláudio Filipe Tereso

    2016-12-01

    Full Text Available This article presents VAFAE – Forum Access Visualization on a Distance Learning Environment, a web tool that visually maps Universidade Aberta’s (UAb students’ interaction with a course available on the e-learning platform. Raw data is extracted from the log files that are then transformed to obtain the necessary format. Next, different visualization techniques are applied with the aim of improving and streamlining the underlying information. In a more specific way, VAFAE aims at helping teachers to better understand the level and quality of the interaction of the students with the modules of the learning units in UAb’s distance learning environment.

  12. The Transcriptome Analysis and Comparison Explorer--T-ACE: a platform-independent, graphical tool to process large RNAseq datasets of non-model organisms.

    Science.gov (United States)

    Philipp, E E R; Kraemer, L; Mountfort, D; Schilhabel, M; Schreiber, S; Rosenstiel, P

    2012-03-15

    Next generation sequencing (NGS) technologies allow a rapid and cost-effective compilation of large RNA sequence datasets in model and non-model organisms. However, the storage and analysis of transcriptome information from different NGS platforms is still a significant bottleneck, leading to a delay in data dissemination and subsequent biological understanding. Especially database interfaces with transcriptome analysis modules going beyond mere read counts are missing. Here, we present the Transcriptome Analysis and Comparison Explorer (T-ACE), a tool designed for the organization and analysis of large sequence datasets, and especially suited for transcriptome projects of non-model organisms with little or no a priori sequence information. T-ACE offers a TCL-based interface, which accesses a PostgreSQL database via a php-script. Within T-ACE, information belonging to single sequences or contigs, such as annotation or read coverage, is linked to the respective sequence and immediately accessible. Sequences and assigned information can be searched via keyword- or BLAST-search. Additionally, T-ACE provides within and between transcriptome analysis modules on the level of expression, GO terms, KEGG pathways and protein domains. Results are visualized and can be easily exported for external analysis. We developed T-ACE for laboratory environments, which have only a limited amount of bioinformatics support, and for collaborative projects in which different partners work on the same dataset from different locations or platforms (Windows/Linux/MacOS). For laboratories with some experience in bioinformatics and programming, the low complexity of the database structure and open-source code provides a framework that can be customized according to the different needs of the user and transcriptome project.

  13. xSyn: A Software Tool for Identifying Sophisticated 3-Way Interactions From Cancer Expression Data

    Directory of Open Access Journals (Sweden)

    Baishali Bandyopadhyay

    2017-08-01

    Full Text Available Background: Constructing gene co-expression networks from cancer expression data is important for investigating the genetic mechanisms underlying cancer. However, correlation coefficients or linear regression models are not able to model sophisticated relationships among gene expression profiles. Here, we address the 3-way interaction that 2 genes’ expression levels are clustered in different space locations under the control of a third gene’s expression levels. Results: We present xSyn, a software tool for identifying such 3-way interactions from cancer gene expression data based on an optimization procedure involving the usage of UPGMA (Unweighted Pair Group Method with Arithmetic Mean and synergy. The effectiveness is demonstrated by application to 2 real gene expression data sets. Conclusions: xSyn is a useful tool for decoding the complex relationships among gene expression profiles. xSyn is available at http://www.bdxconsult.com/xSyn.html .

  14. TH-C-12A-12: Veritas: An Open Source Tool to Facilitate User Interaction with TrueBeam Developer Mode

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, P [Brigham and Women' s Hospital, Harvard Medical School, Boston, MA (United States); Varian Medical Systems, Palo Alto, CA (United States); Lewis, J [Brigham and Women' s Hospital, Harvard Medical School, Boston, MA (United States); Etmektzoglou, T; Svatos, M [Varian Medical Systems, Palo Alto, CA (United States)

    2014-06-15

    Purpose: To address the challenges of creating delivery trajectories and imaging sequences with TrueBeam Developer Mode, a new open-source graphical XML builder, Veritas, has been developed, tested and made freely available. Veritas eliminates most of the need to understand the underlying schema and write XML scripts, by providing a graphical menu for each control point specifying the state of 30 mechanical/dose axes. All capabilities of Developer Mode are accessible in Veritas. Methods: Veritas was designed using QT Designer, a ‘what-you-is-what-you-get’ (WYSIWIG) tool for building graphical user interfaces (GUI). Different components of the GUI are integrated using QT's signals and slots mechanism. Functionalities are added using PySide, an open source, cross platform Python binding for the QT framework. The XML code generated is immediately visible, making it an interactive learning tool. A user starts from an anonymized DICOM file or XML example and introduces delivery modifications, or begins their experiment from scratch, then uses the GUI to modify control points as desired. The software automatically generates XML plans following the appropriate schema. Results: Veritas was tested by generating and delivering two XML plans at Brigham and Women's Hospital. The first example was created to irradiate the letter ‘B’ with a narrow MV beam using dynamic couch movements. The second was created to acquire 4D CBCT projections for four minutes. The delivery of the letter ‘B’ was observed using a 2D array of ionization chambers. Both deliveries were generated quickly in Veritas by non-expert Developer Mode users. Conclusion: We introduced a new open source tool Veritas for generating XML plans (delivery trajectories and imaging sequences). Veritas makes Developer Mode more accessible by reducing the learning curve for quick translation of research ideas into XML plans. Veritas is an open source initiative, creating the possibility for future

  15. TH-C-12A-12: Veritas: An Open Source Tool to Facilitate User Interaction with TrueBeam Developer Mode

    International Nuclear Information System (INIS)

    Mishra, P; Lewis, J; Etmektzoglou, T; Svatos, M

    2014-01-01

    Purpose: To address the challenges of creating delivery trajectories and imaging sequences with TrueBeam Developer Mode, a new open-source graphical XML builder, Veritas, has been developed, tested and made freely available. Veritas eliminates most of the need to understand the underlying schema and write XML scripts, by providing a graphical menu for each control point specifying the state of 30 mechanical/dose axes. All capabilities of Developer Mode are accessible in Veritas. Methods: Veritas was designed using QT Designer, a ‘what-you-is-what-you-get’ (WYSIWIG) tool for building graphical user interfaces (GUI). Different components of the GUI are integrated using QT's signals and slots mechanism. Functionalities are added using PySide, an open source, cross platform Python binding for the QT framework. The XML code generated is immediately visible, making it an interactive learning tool. A user starts from an anonymized DICOM file or XML example and introduces delivery modifications, or begins their experiment from scratch, then uses the GUI to modify control points as desired. The software automatically generates XML plans following the appropriate schema. Results: Veritas was tested by generating and delivering two XML plans at Brigham and Women's Hospital. The first example was created to irradiate the letter ‘B’ with a narrow MV beam using dynamic couch movements. The second was created to acquire 4D CBCT projections for four minutes. The delivery of the letter ‘B’ was observed using a 2D array of ionization chambers. Both deliveries were generated quickly in Veritas by non-expert Developer Mode users. Conclusion: We introduced a new open source tool Veritas for generating XML plans (delivery trajectories and imaging sequences). Veritas makes Developer Mode more accessible by reducing the learning curve for quick translation of research ideas into XML plans. Veritas is an open source initiative, creating the possibility for future

  16. Interactive, open source, travel time scenario modelling: tools to facilitate participation in health service access analysis.

    Science.gov (United States)

    Fisher, Rohan; Lassa, Jonatan

    2017-04-18

    Modelling travel time to services has become a common public health tool for planning service provision but the usefulness of these analyses is constrained by the availability of accurate input data and limitations inherent in the assumptions and parameterisation. This is particularly an issue in the developing world where access to basic data is limited and travel is often complex and multi-modal. Improving the accuracy and relevance in this context requires greater accessibility to, and flexibility in, travel time modelling tools to facilitate the incorporation of local knowledge and the rapid exploration of multiple travel scenarios. The aim of this work was to develop simple open source, adaptable, interactive travel time modelling tools to allow greater access to and participation in service access analysis. Described are three interconnected applications designed to reduce some of the barriers to the more wide-spread use of GIS analysis of service access and allow for complex spatial and temporal variations in service availability. These applications are an open source GIS tool-kit and two geo-simulation models. The development of these tools was guided by health service issues from a developing world context but they present a general approach to enabling greater access to and flexibility in health access modelling. The tools demonstrate a method that substantially simplifies the process for conducting travel time assessments and demonstrate a dynamic, interactive approach in an open source GIS format. In addition this paper provides examples from empirical experience where these tools have informed better policy and planning. Travel and health service access is complex and cannot be reduced to a few static modeled outputs. The approaches described in this paper use a unique set of tools to explore this complexity, promote discussion and build understanding with the goal of producing better planning outcomes. The accessible, flexible, interactive and

  17. Development of a prototype graphic simulation program for severe accident training

    International Nuclear Information System (INIS)

    Kim, Ko Ryu; Jeong, Kwang Sub; Ha, Jae Joo

    2000-05-01

    This is a report of the development process and related technologies of severe accident graphic simulators, required in industrial severe accident management and training. Here, we say 'a severe accident graphic simulator' as a graphics add-in system to existing calculation codes, which can show the severe accident phenomena dynamically on computer screens and therefore which can supplement one of main defects of existing calculation codes. With graphic simulators it is fairly easy to see the total behavior of nuclear power plants, where it was very difficult to see only from partial variable numerical information. Moreover, the fast processing and control feature of a graphic simulator can give some opportunities of predicting the severe accident advancement among several possibilities, to one who is not an expert. Utilizing graphic simulators' we expect operators' and TSC members' physical phenomena understanding enhancement from the realistic dynamic behavior of plants. We also expect that severe accident training course can gain better training effects using graphic simulator's control functions and predicting capabilities, and therefore we expect that graphic simulators will be effective decision-aids tools both in sever accident training course and in real severe accident situations. With these in mind, we have developed a prototype graphic simulator having surveyed related technologies, and from this development experiences we have inspected the possibility to build a severe accident graphic simulator. The prototype graphic simulator is developed under IBM PC WinNT environments and is suited to Uljin 3and4 nuclear power plant. When supplied with adequate severe accident scenario as an input, the prototype can provide graphical simulations of plant safety systems' dynamic behaviors. The prototype is composed of several different modules, which are phenomena display module, MELCOR data interface module and graphic database interface module. Main functions of

  18. Development of a prototype graphic simulation program for severe accident training

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ko Ryu; Jeong, Kwang Sub; Ha, Jae Joo

    2000-05-01

    This is a report of the development process and related technologies of severe accident graphic simulators, required in industrial severe accident management and training. Here, we say 'a severe accident graphic simulator' as a graphics add-in system to existing calculation codes, which can show the severe accident phenomena dynamically on computer screens and therefore which can supplement one of main defects of existing calculation codes. With graphic simulators it is fairly easy to see the total behavior of nuclear power plants, where it was very difficult to see only from partial variable numerical information. Moreover, the fast processing and control feature of a graphic simulator can give some opportunities of predicting the severe accident advancement among several possibilities, to one who is not an expert. Utilizing graphic simulators' we expect operators' and TSC members' physical phenomena understanding enhancement from the realistic dynamic behavior of plants. We also expect that severe accident training course can gain better training effects using graphic simulator's control functions and predicting capabilities, and therefore we expect that graphic simulators will be effective decision-aids tools both in sever accident training course and in real severe accident situations. With these in mind, we have developed a prototype graphic simulator having surveyed related technologies, and from this development experiences we have inspected the possibility to build a severe accident graphic simulator. The prototype graphic simulator is developed under IBM PC WinNT environments and is suited to Uljin 3and4 nuclear power plant. When supplied with adequate severe accident scenario as an input, the prototype can provide graphical simulations of plant safety systems' dynamic behaviors. The prototype is composed of several different modules, which are phenomena display module, MELCOR data interface module and graphic database

  19. PPI finder: a mining tool for human protein-protein interactions.

    Directory of Open Access Journals (Sweden)

    Min He

    Full Text Available BACKGROUND: The exponential increase of published biomedical literature prompts the use of text mining tools to manage the information overload automatically. One of the most common applications is to mine protein-protein interactions (PPIs from PubMed abstracts. Currently, most tools in mining PPIs from literature are using co-occurrence-based approaches or rule-based approaches. Hybrid methods (frame-based approaches by combining these two methods may have better performance in predicting PPIs. However, the predicted PPIs from these methods are rarely evaluated by known PPI databases and co-occurred terms in Gene Ontology (GO database. METHODOLOGY/PRINCIPAL FINDINGS: We here developed a web-based tool, PPI Finder, to mine human PPIs from PubMed abstracts based on their co-occurrences and interaction words, followed by evidences in human PPI databases and shared terms in GO database. Only 28% of the co-occurred pairs in PubMed abstracts appeared in any of the commonly used human PPI databases (HPRD, BioGRID and BIND. On the other hand, of the known PPIs in HPRD, 69% showed co-occurrences in the literature, and 65% shared GO terms. CONCLUSIONS: PPI Finder provides a useful tool for biologists to uncover potential novel PPIs. It is freely accessible at http://liweilab.genetics.ac.cn/tm/.

  20. Graphics server and action language interpreter greatly simplify the composition of a graphical user interface

    International Nuclear Information System (INIS)

    Mueller, R.

    1992-01-01

    A new control system based on a distributed computing environment is gradually installed at BESSY, a 800 MeV storage ring dedicated to the generation of synchrotron light in the VUV and soft X-ray region. The new operator consoles are large high resolution, bitmap oriented color graphic screens with mouse and keyboard. A new graphical user interface has been developed with a user interface management system. A graphics server encapsulates completely representational aspects, mediates between user interactions and application variables and takes care of a consistent state of graphical and applicational objects. Graphical representations, semantics of user interactions and interpreter instructions are defined in a database written in a simple and comprehensible user interface definition language. (R.P.) 7 refs.; 5 figs

  1. Xeml Lab: a tool that supports the design of experiments at a graphical interface and generates computer-readable metadata files, which capture information about genotypes, growth conditions, environmental perturbations and sampling strategy.

    Science.gov (United States)

    Hannemann, Jan; Poorter, Hendrik; Usadel, Björn; Bläsing, Oliver E; Finck, Alex; Tardieu, Francois; Atkin, Owen K; Pons, Thijs; Stitt, Mark; Gibon, Yves

    2009-09-01

    Data mining depends on the ability to access machine-readable metadata that describe genotypes, environmental conditions, and sampling times and strategy. This article presents Xeml Lab. The Xeml Interactive Designer provides an interactive graphical interface at which complex experiments can be designed, and concomitantly generates machine-readable metadata files. It uses a new eXtensible Mark-up Language (XML)-derived dialect termed XEML. Xeml Lab includes a new ontology for environmental conditions, called Xeml Environment Ontology. However, to provide versatility, it is designed to be generic and also accepts other commonly used ontology formats, including OBO and OWL. A review summarizing important environmental conditions that need to be controlled, monitored and captured as metadata is posted in a Wiki (http://www.codeplex.com/XeO) to promote community discussion. The usefulness of Xeml Lab is illustrated by two meta-analyses of a large set of experiments that were performed with Arabidopsis thaliana during 5 years. The first reveals sources of noise that affect measurements of metabolite levels and enzyme activities. The second shows that Arabidopsis maintains remarkably stable levels of sugars and amino acids across a wide range of photoperiod treatments, and that adjustment of starch turnover and the leaf protein content contribute to this metabolic homeostasis.

  2. Graphical debugging of combinational geometry

    International Nuclear Information System (INIS)

    Burns, T.J.; Smith, M.S.

    1992-01-01

    A graphical debugger for combinatorial geometry being developed at Oak Ridge National Laboratory is described. The prototype debugger consists of two parts: a FORTRAN-based ''view'' generator and a Microsoft Windows application for displaying the geometry. Options and features of both modules are discussed. Examples illustrating the various options available are presented. The potential for utilizing the images produced using the debugger as a visualization tool for the output of the radiation transport codes is discussed as is the future direction of the development

  3. Computer graphics at VAX JINR

    International Nuclear Information System (INIS)

    Balashov, V.K.

    1991-01-01

    The structure of the software for computer graphics at VAX JINR is described. It consists of graphical packages GKS, WAND and a set graphicals packages for High Energy Physics application designed at CERN. 17 refs.; 1 tab

  4. Graphical symbol recognition

    OpenAIRE

    K.C. , Santosh; Wendling , Laurent

    2015-01-01

    International audience; The chapter focuses on one of the key issues in document image processing i.e., graphical symbol recognition. Graphical symbol recognition is a sub-field of a larger research domain: pattern recognition. The chapter covers several approaches (i.e., statistical, structural and syntactic) and specially designed symbol recognition techniques inspired by real-world industrial problems. It, in general, contains research problems, state-of-the-art methods that convey basic s...

  5. Writing from behind the Fence: Incarcerated Youths and a Graphic Novel on HIV/AIDS

    Science.gov (United States)

    Gavigan, Karen; Albright, Kendra

    2015-01-01

    Graphic novels are an increasingly popular format that educators can use as a tool to teach reading and writing skills across the K-12 curriculum. This article describes a project in which incarcerated youths collaborated with a graphic illustrator to create a graphic novel about teens dealing with issues related to HIV/AIDS. The graphic novel is…

  6. BMRF-Net: a software tool for identification of protein interaction subnetworks by a bagging Markov random field-based method.

    Science.gov (United States)

    Shi, Xu; Barnes, Robert O; Chen, Li; Shajahan-Haq, Ayesha N; Hilakivi-Clarke, Leena; Clarke, Robert; Wang, Yue; Xuan, Jianhua

    2015-07-15

    Identification of protein interaction subnetworks is an important step to help us understand complex molecular mechanisms in cancer. In this paper, we develop a BMRF-Net package, implemented in Java and C++, to identify protein interaction subnetworks based on a bagging Markov random field (BMRF) framework. By integrating gene expression data and protein-protein interaction data, this software tool can be used to identify biologically meaningful subnetworks. A user friendly graphic user interface is developed as a Cytoscape plugin for the BMRF-Net software to deal with the input/output interface. The detailed structure of the identified networks can be visualized in Cytoscape conveniently. The BMRF-Net package has been applied to breast cancer data to identify significant subnetworks related to breast cancer recurrence. The BMRF-Net package is available at http://sourceforge.net/projects/bmrfcjava/. The package is tested under Ubuntu 12.04 (64-bit), Java 7, glibc 2.15 and Cytoscape 3.1.0. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  7. An Interactive Computer Tool for Teaching About Desalination and Managing Water Demand in the US

    Science.gov (United States)

    Ziolkowska, J. R.; Reyes, R.

    2016-12-01

    This paper presents an interactive tool to geospatially and temporally analyze desalination developments and trends in the US in the time span 1950-2013, its current contribution to satisfying water demands and its future potentials. The computer tool is open access and can be used by any user with Internet connection, thus facilitating interactive learning about water resources. The tool can also be used by stakeholders and policy makers for decision-making support and with designing sustainable water management strategies. Desalination technology has been acknowledged as a solution to a sustainable water demand management stemming from many sectors, including municipalities, industry, agriculture, power generation, and other users. Desalination has been applied successfully in the US and many countries around the world since 1950s. As of 2013, around 1,336 desalination plants were operating in the US alone, with a daily production capacity of 2 BGD (billion gallons per day) (GWI, 2013). Despite a steady increase in the number of new desalination plants and growing production capacity, in many regions, the costs of desalination are still prohibitive. At the same time, the technology offers a tremendous potential for `enormous supply expansion that exceeds all likely demands' (Chowdhury et al., 2013). The model and tool are based on data from Global Water Intelligence (GWI, 2013). The analysis shows that more than 90% of all the plants in the US are small-scale plants with the capacity below 4.31 MGD. Most of the plants (and especially larger plants) are located on the US East Coast, as well as in California, Texas, Oklahoma, and Florida. The models and the tool provide information about economic feasibility of potential new desalination plants based on the access to feed water, energy sources, water demand, and experiences of other plants in that region.

  8. Application of standard softWare of the CDC-6500 interactive graphic therminal for representation of spiral scanning data and event saving

    International Nuclear Information System (INIS)

    Nehrguj, B.; Ososkov, G.A.

    1978-01-01

    A system of programs, based on a standard graphic display software, is developed which enables the user to display the results of spiral scanning using a terminal keyboard and a FILTR program. Quality assessment of filtering is also available. The use of a cursor which provides a certain feedback between the display and the CDC-6500 computer provides good capabilities for the investigation of the filtering program failures and saves the most interesting events. To speed up scanning of events, a special program is written which performs pre-filtration and reduces 4 to 5 fold the amount of source numerical data of track projections. Its flowchart is based on the well-known method of cords, which allows to save 10-12 events/hour

  9. The graphics future in scientific applications-trends and developments in computer graphics

    CERN Document Server

    Enderle, G

    1982-01-01

    Computer graphics methods and tools are being used to a great extent in scientific research. The future development in this area will be influenced both by new hardware developments and by software advances. On the hardware sector, the development of the raster technology will lead to the increased use of colour workstations with more local processing power. Colour hardcopy devices for creating plots, slides, or movies will be available at a lower price than today. The first real 3D-workstations will appear on the marketplace. One of the main activities on the software sector is the standardization of computer graphics systems, graphical files, and device interfaces. This will lead to more portable graphical application programs and to a common base for computer graphics education.

  10. Novel 3D Approach to Flare Modeling via Interactive IDL Widget Tools

    Science.gov (United States)

    Nita, G. M.; Fleishman, G. D.; Gary, D. E.; Kuznetsov, A.; Kontar, E. P.

    2011-12-01

    Currently, and soon-to-be, available sophisticated 3D models of particle acceleration and transport in solar flares require a new level of user-friendly visualization and analysis tools allowing quick and easy adjustment of the model parameters and computation of realistic radiation patterns (images, spectra, polarization, etc). We report the current state of the art of these tools in development, already proved to be highly efficient for the direct flare modeling. We present an interactive IDL widget application intended to provide a flexible tool that allows the user to generate spatially resolved radio and X-ray spectra. The object-based architecture of this application provides full interaction with imported 3D magnetic field models (e.g., from an extrapolation) that may be embedded in a global coronal model. Various tools provided allow users to explore the magnetic connectivity of the model by generating magnetic field lines originating in user-specified volume positions. Such lines may serve as reference lines for creating magnetic flux tubes, which are further populated with user-defined analytical thermal/non thermal particle distribution models. By default, the application integrates IDL callable DLL and Shared libraries containing fast GS emission codes developed in FORTRAN and C++ and soft and hard X-ray codes developed in IDL. However, the interactive interface allows interchanging these default libraries with any user-defined IDL or external callable codes designed to solve the radiation transfer equation in the same or other wavelength ranges of interest. To illustrate the tool capacity and generality, we present a step-by-step real-time computation of microwave and X-ray images from realistic magnetic structures obtained from a magnetic field extrapolation preceding a real event, and compare them with the actual imaging data obtained by NORH and RHESSI instruments. We discuss further anticipated developments of the tools needed to accommodate

  11. An interactive visualization tool for multi-channel confocal microscopy data in neurobiology research

    KAUST Repository

    Yong Wan,

    2009-11-01

    Confocal microscopy is widely used in neurobiology for studying the three-dimensional structure of the nervous system. Confocal image data are often multi-channel, with each channel resulting from a different fluorescent dye or fluorescent protein; one channel may have dense data, while another has sparse; and there are often structures at several spatial scales: subneuronal domains, neurons, and large groups of neurons (brain regions). Even qualitative analysis can therefore require visualization using techniques and parameters fine-tuned to a particular dataset. Despite the plethora of volume rendering techniques that have been available for many years, the techniques standardly used in neurobiological research are somewhat rudimentary, such as looking at image slices or maximal intensity projections. Thus there is a real demand from neurobiologists, and biologists in general, for a flexible visualization tool that allows interactive visualization of multi-channel confocal data, with rapid fine-tuning of parameters to reveal the three-dimensional relationships of structures of interest. Together with neurobiologists, we have designed such a tool, choosing visualization methods to suit the characteristics of confocal data and a typical biologist\\'s workflow. We use interactive volume rendering with intuitive settings for multidimensional transfer functions, multiple render modes and multi-views for multi-channel volume data, and embedding of polygon data into volume data for rendering and editing. As an example, we apply this tool to visualize confocal microscopy datasets of the developing zebrafish visual system.

  12. ISS-studio: a prototype for a user-friendly tool for designing interactive experiments in problem solving environments

    NARCIS (Netherlands)

    Zhao, Z.; van Albada, G.D.; Tirado-Ramos, A.; Zajac, K.; Sloot, P.M.A.

    2003-01-01

    In Problem Solving Environments (PSE), Interactive Simulation Systems (ISS) are an important interactive mode for studying complex scientific problems. But efficient and user-friendly tools for designing interactive experiments lack in many PSEs. Mechanisms, such as data flow and control flow

  13. Environment of symbolic and graphic programming for the SYMPATI-2 line processor

    International Nuclear Information System (INIS)

    Fernandez, Pascal

    1991-01-01

    This research thesis reports the development of a programming environment which can be easily used at all levels of development of an application in the field of image processing. The author first presents different programming environments by distinguishing, on the one hand, languages or environments which are not specific to a machine, and, on the other hand, languages or environments which are dedicated to a specialised parallel architecture. Then, after a recall of the structure of the line processor from an operational point of view, the author proposes a detailed presentation of the 4LP language, i.e. the layer 0 of the environment. The three other layers are then presented. They respectively comprise a high level symbolic language, a user-friendly and interactive graphic tool, and an interactive graphic tool for the development of applications from programme icons

  14. Implementing and Operating Computer Graphics in the Contemporary Chemistry Education

    Directory of Open Access Journals (Sweden)

    Olga Popovska

    2017-11-01

    Full Text Available Technology plays a crucial role in modern teaching, providing both, educators and students fundamental theoretical insights as well as supporting the interpretation of experimental data. In the long term it gives students a clear stake in their learning processes. Advancing in education furthermore largely depends on providing valuable experiences and tools throughout digital and computer literacy. Here and after, the computer’s benefit makes no exception in the chemistry as a science. The major part of computer revolutionizing in the chemistry laboratory is with the use of images, diagrams, molecular models, graphs and specialized chemistry programs. In the sense of this, the teacher provides more interactive classes and numerous dynamic teaching methods along with advanced technology. All things considered, the aim of this article is to implement interactive teaching methods of chemistry subjects using chemistry computer graphics. A group of students (n = 30 at the age of 18–20 were testing using methods such as brainstorming, demonstration, working in pairs, and writing laboratory notebooks. The results showed that demonstration is the most acceptable interactive method (95%. This article is expected to be of high value to teachers and researchers of chemistry, implementing interactive methods, and operating computer graphics.

  15. Programming Interactivity

    CERN Document Server

    Noble, Joshua

    2009-01-01

    Make cool stuff. If you're a designer or artist without a lot of programming experience, this book will teach you to work with 2D and 3D graphics, sound, physical interaction, and electronic circuitry to create all sorts of interesting and compelling experiences -- online and off. Programming Interactivity explains programming and electrical engineering basics, and introduces three freely available tools created specifically for artists and designers: Processing, a Java-based programming language and environment for building projects on the desktop, Web, or mobile phonesArduino, a system t

  16. Use of online interactive tools in an open distance learning context: Health studies students' perspective*

    Directory of Open Access Journals (Sweden)

    Kefiloe A. Maboe

    2017-10-01

    Full Text Available Background: Open distance learning (ODL institutions provide educational challenges with specific reference to the training of nurses. They have adopted online technologies to facilitate teaching and learning. However it is observed that most nurses do not use or minimally use tools such as a discussion forum for online interaction to facilitate teaching and learning. Objective: The purpose of this study was to determine how the discussion forum as an online interactive tool be used in an ODL institution to enhance student-to-student and student-to-lecturer online interactions. Design: Quantitative and descriptive in nature. Method: No sampling was done. An online questionnaire was sent to all 410 second and third years Health Services Management students around the world registered with a specific ODL institution during the second semester. Eighty seven students responded to the questionnaire. Data analysis was done quantitatively and descriptively in the form of diagrams. Results: The findings indicated that 84.9% of students own computers, and 100% own cellular phones, but only 3.8% participated in online discussion forum. Some students indicated that they were technologically challenged. Some lecturers interact minimally online and are not supportive to them. The institution does not give them the support they need to acquire the necessary skills to utilise these technologies. Conclusion: The article suggests that lecturers, active interaction in an online discussion forum as a way of supporting students, are fundamental to effective teaching and learning.The university should consider providing intensive mentoring to students to enable them to utilise the available technologies optimally.

  17. Proteoliposomes as Tool for Assaying Membrane Transporter Functions and Interactions with Xenobiotics

    Directory of Open Access Journals (Sweden)

    Annamaria Tonazzi

    2013-09-01

    Full Text Available Proteoliposomes represent a suitable and up to date tool for studying membrane transporters which physiologically mediate absorption, excretion, trafficking and reabsorption of nutrients and metabolites. Using recently developed reconstitution strategies, transporters can be inserted in artificial bilayers with the same orientation as in the cell membranes and in the absence of other interfering molecular systems. These methodologies are very suitable for studying kinetic parameters and molecular mechanisms. After the first applications on mitochondrial transporters, in the last decade, proteoliposomes obtained with optimized methodologies have been used for studying plasma membrane transporters and defining their functional and kinetic properties and structure/function relationships. A lot of information has been obtained which has clarified and completed the knowledge on several transporters among which the OCTN sub-family members, transporters for neutral amino acid, B0AT1 and ASCT2, and others. Transporters can mediate absorption of substrate-like derivatives or drugs, improving their bioavailability or can interact with these compounds or other xenobiotics, leading to side/toxic effects. Therefore, proteoliposomes have recently been used for studying the interaction of some plasma membrane and mitochondrial transporters with toxic compounds, such as mercurials, H2O2 and some drugs. Several mechanisms have been defined and in some cases the amino acid residues responsible for the interaction have been identified. The data obtained indicate proteoliposomes as a novel and potentially important tool in drug discovery.

  18. Interacting orientations and instrumentalities to adapt a learning tool for health professionals

    Directory of Open Access Journals (Sweden)

    Kathrine L. Nygård

    2015-09-01

    Full Text Available Web-based instructional software offers new opportunities for collaborative, task-oriented in-service training. Planning and negotiation of content to adapt a web-based learning resource for nursing is the topic of this paper. We draw from Cultural Historical Activity Theory to elaborate the dialectical relationship of changing and stabilizing organizational practice. Local adaptation to create a domain-specific resource plays out as interactions of orientations and instrumentalities. Our analysis traces how orientations, i.e., in situ selection of knowledge and mobilization of experiences, and instrumentality, i.e., interpreted affordances of available cultural tools, interact. The adaptation processes are mediated by a set of new and current tools that interact with multiple orientations to ensure stability and promote change. Practice and project are introduced as intermediate, analytic concepts to assess tensions in the observed activity. Our analysis shows three central tensions, how they are introduced, addressed and subsequently resolved. Considering the opportunities help understand how engagement with technology can lead to new representations for introduction to a local knowledge domain.

  19. XCluSim: a visual analytics tool for interactively comparing multiple clustering results of bioinformatics data

    Science.gov (United States)

    2015-01-01

    Background Though cluster analysis has become a routine analytic task for bioinformatics research, it is still arduous for researchers to assess the quality of a clustering result. To select the best clustering method and its parameters for a dataset, researchers have to run multiple clustering algorithms and compare them. However, such a comparison task with multiple clustering results is cognitively demanding and laborious. Results In this paper, we present XCluSim, a visual analytics tool that enables users to interactively compare multiple clustering results based on the Visual Information Seeking Mantra. We build a taxonomy for categorizing existing techniques of clustering results visualization in terms of the Gestalt principles of grouping. Using the taxonomy, we choose the most appropriate interactive visualizations for presenting individual clustering results from different types of clustering algorithms. The efficacy of XCluSim is shown through case studies with a bioinformatician. Conclusions Compared to other relevant tools, XCluSim enables users to compare multiple clustering results in a more scalable manner. Moreover, XCluSim supports diverse clustering algorithms and dedicated visualizations and interactions for different types of clustering results, allowing more effective exploration of details on demand. Through case studies with a bioinformatics researcher, we received positive feedback on the functionalities of XCluSim, including its ability to help identify stably clustered items across multiple clustering results. PMID:26328893

  20. Real-time graphics for the Space Station Freedom cupola, developed in the Systems Engineering Simulator

    Science.gov (United States)

    Red, Michael T.; Hess, Philip W.

    1989-01-01

    Among the Lyndon B. Johnson Space Center's responsibilities for Space Station Freedom is the cupola. Attached to the resource node, the cupola is a windowed structure that will serve as the space station's secondary control center. From the cupola, operations involving the mobile service center and orbital maneuvering vehicle will be conducted. The Systems Engineering Simulator (SES), located in building 16, activated a real-time man-in-the-loop cupola simulator in November 1987. The SES cupola is an engineering tool with the flexibility to evolve in both hardware and software as the final cupola design matures. Two workstations are simulated with closed-circuit television monitors, rotational and translational hand controllers, programmable display pushbuttons, and graphics display with trackball and keyboard. The displays and controls of the SES cupola are driven by a Silicon Graphics Integrated Raster Imaging System (IRIS) 4D/70 GT computer. Through the use of an interactive display builder program, SES, cupola display pages consisting of two dimensional and three dimensional graphics are constructed. These display pages interact with the SES via the IRIS real-time graphics interface. The focus is on the real-time graphics interface applications software developed on the IRIS.

  1. A flexible, interactive software tool for fitting the parameters of neuronal models.

    Science.gov (United States)

    Friedrich, Péter; Vella, Michael; Gulyás, Attila I; Freund, Tamás F; Káli, Szabolcs

    2014-01-01

    The construction of biologically relevant neuronal models as well as model-based analysis of experimental data often requires the simultaneous fitting of multiple model parameters, so that the behavior of the model in a certain paradigm matches (as closely as possible) the corresponding output of a real neuron according to some predefined criterion. Although the task of model optimization is often computationally hard, and the quality of the results depends heavily on technical issues such as the appropriate choice (and implementation) of cost functions and optimization algorithms, no existing program provides access to the best available methods while also guiding the user through the process effectively. Our software, called Optimizer, implements a modular and extensible framework for the optimization of neuronal models, and also features a graphical interface which makes it easy for even non-expert users to handle many commonly occurring scenarios. Meanwhile, educated users can extend the capabilities of the program and customize it according to their needs with relatively little effort. Optimizer has been developed in Python, takes advantage of open-source Python modules for nonlinear optimization, and interfaces directly with the NEURON simulator to run the models. Other simulators are supported through an external interface. We have tested the program on several different types of problems of varying complexity, using different model classes. As targets, we used simulated traces from the same or a more complex model class, as well as experimental data. We successfully used Optimizer to determine passive parameters and conductance densities in compartmental models, and to fit simple (adaptive exponential integrate-and-fire) neuronal models to complex biological data. Our detailed comparisons show that Optimizer can handle a wider range of problems, and delivers equally good or better performance than any other existing neuronal model fitting tool.

  2. A flexible, interactive software tool for fitting the parameters of neuronal models

    Directory of Open Access Journals (Sweden)

    Péter eFriedrich

    2014-07-01

    Full Text Available The construction of biologically relevant neuronal models as well as model-based analysis of experimental data often requires the simultaneous fitting of multiple model parameters, so that the behavior of the model in a certain paradigm matches (as closely as possible the corresponding output of a real neuron according to some predefined criterion. Although the task of model optimization is often computationally hard, and the quality of the results depends heavily on technical issues such as the appropriate choice (and implementation of cost functions and optimization algorithms, no existing program provides access to the best available methods while also guiding the user through the process effectively. Our software, called Optimizer, implements a modular and extensible framework for the optimization of neuronal models, and also features a graphical interface which makes it easy for even non-expert users to handle many commonly occurring scenarios. Meanwhile, educated users can extend the capabilities of the program and customize it according to their needs with relatively little effort. Optimizer has been developed in Python, takes advantage of open-source Python modules for nonlinear optimization, and interfaces directly with the NEURON simulator to run the models. Other simulators are supported through an external interface. We have tested the program on several different types of problem of varying complexity, using different model classes. As targets, we used simulated traces from the same or a more complex model class, as well as experimental data. We successfully used Optimizer to determine passive parameters and conductance densities in compartmental models, and to fit simple (adaptive exponential integrate-and-fire neuronal models to complex biological data. Our detailed comparisons show that Optimizer can handle a wider range of problems, and delivers equally good or better performance than any other existing neuronal model fitting

  3. Geolokit: An interactive tool for visualising and exploring geoscientific data in Google Earth

    Science.gov (United States)

    Triantafyllou, Antoine; Watlet, Arnaud; Bastin, Christophe

    2017-10-01

    Virtual globes have been developed to showcase different types of data combining a digital elevation model and basemaps of high resolution satellite imagery. Hence, they became a standard to share spatial data and information, although they suffer from a lack of toolboxes dedicated to the formatting of large geoscientific dataset. From this perspective, we developed Geolokit: a free and lightweight software that allows geoscientists - and every scientist working with spatial data - to import their data (e.g., sample collections, structural geology, cross-sections, field pictures, georeferenced maps), to handle and to transcribe them to Keyhole Markup Language (KML) files. KML files are then automatically opened in the Google Earth virtual globe and the spatial data accessed and shared. Geolokit comes with a large number of dedicated tools that can process and display: (i) multi-points data, (ii) scattered data interpolations, (iii) structural geology features in 2D and 3D, (iv) rose diagrams, stereonets and dip-plunge polar histograms, (v) cross-sections and oriented rasters, (vi) georeferenced field pictures, (vii) georeferenced maps and projected gridding. Therefore, together with Geolokit, Google Earth becomes not only a powerful georeferenced data viewer but also a stand-alone work platform. The toolbox (available online at http://www.geolokit.org) is written in Python, a high-level, cross-platform programming language and is accessible through a graphical user interface, designed to run in parallel with Google Earth, through a workflow that requires no additional third party software. Geolokit features are demonstrated in this paper using typical datasets gathered from two case studies illustrating its applicability at multiple scales of investigation: a petro-structural investigation of the Ile d'Yeu orthogneissic unit (Western France) and data collection of the Mariana oceanic subduction zone (Western Pacific).

  4. The Interactive Candidate Assessment Tool: A New Way to Interview Residents.

    Science.gov (United States)

    Platt, Michael P; Akhtar-Khavari, Vafa; Ortega, Rafael; Schneider, Jeffrey I; Fineberg, Tabitha; Grundfast, Kenneth M

    2017-06-01

    The purpose of the residency interview is to determine the extent to which a well-qualified applicant is a good fit with a residency program. However, questions asked during residency interviews tend to be standard and repetitive, and they may not elicit information that best differentiates one applicant from another. The iCAT (interactive Candidate Assessment Tool) is a novel interview instrument that allows both interviewers and interviewees to learn about each other in a meaningful way. The iCAT uses a tablet computer to enable the candidate to select questions from an array of video and nonvideo vignettes. Vignettes include recorded videos regarding some aspect of the program, while other icons include questions within recognizable categories. Postinterview surveys demonstrated advantages over traditional interview methods, with 93% agreeing that it was an innovative and effective tool for conducting residency program interviews. The iCAT for residency interviews is a technological advancement that facilitates in-depth candidate assessment.

  5. An Open-Source Web-Based Tool for Resource-Agnostic Interactive Translation Prediction

    Directory of Open Access Journals (Sweden)

    Daniel Torregrosa

    2014-09-01

    Full Text Available We present a web-based open-source tool for interactive translation prediction (ITP and describe its underlying architecture. ITP systems assist human translators by making context-based computer-generated suggestions as they type. Most of the ITP systems in literature are strongly coupled with a statistical machine translation system that is conveniently adapted to provide the suggestions. Our system, however, follows a resource-agnostic approach and suggestions are obtained from any unmodified black-box bilingual resource. This paper reviews our ITP method and describes the architecture of Forecat, a web tool, partly based on the recent technology of web components, that eases the use of our ITP approach in any web application requiring this kind of translation assistance. We also evaluate the performance of our method when using an unmodified Moses-based statistical machine translation system as the bilingual resource.

  6. An interactive GIS based tool on Chinese history and its topography

    Science.gov (United States)

    Konda, Ashish Reddy

    The aim of the thesis is to demonstrate how China was attacked by the foreign powers, the rise and fall of the empires, the border conflicts with India, Russia, Vietnam and territorial disputes in South China Sea. This thesis is focused on creating a GIS tool showcasing the modern Chinese history, which includes the major wars fought during that period. This tool is developed using the features of Google Maps that shows the location of the wars. The topography of China is also represented on the interactive Google Map by creating layers for rivers, mountain ranges and deserts. The provinces with highest population are also represented on the Google Map with circles. The application also shows the historical events in chronological order using a timeline feature. This has been implemented using JQuery, JavaScript, HTML5 and CSS. Chinese culture and biographies of important leaders are also included in this thesis, which is embedded with pictures and videos.

  7. Western aeronautical test range real-time graphics software package MAGIC

    Science.gov (United States)

    Malone, Jacqueline C.; Moore, Archie L.

    1988-01-01

    The master graphics interactive console (MAGIC) software package used on the Western Aeronautical Test Range (WATR) of the NASA Ames Research Center is described. MAGIC is a resident real-time research tool available to flight researchers-scientists in the NASA mission control centers of the WATR at the Dryden Flight Research Facility at Edwards, California. The hardware configuration and capabilities of the real-time software package are also discussed.

  8. Computer graphics application in the engineering design integration system

    Science.gov (United States)

    Glatt, C. R.; Abel, R. W.; Hirsch, G. N.; Alford, G. E.; Colquitt, W. N.; Stewart, W. A.

    1975-01-01

    The computer graphics aspect of the Engineering Design Integration (EDIN) system and its application to design problems were discussed. Three basic types of computer graphics may be used with the EDIN system for the evaluation of aerospace vehicles preliminary designs: offline graphics systems using vellum-inking or photographic processes, online graphics systems characterized by direct coupled low cost storage tube terminals with limited interactive capabilities, and a minicomputer based refresh terminal offering highly interactive capabilities. The offline line systems are characterized by high quality (resolution better than 0.254 mm) and slow turnaround (one to four days). The online systems are characterized by low cost, instant visualization of the computer results, slow line speed (300 BAUD), poor hard copy, and the early limitations on vector graphic input capabilities. The recent acquisition of the Adage 330 Graphic Display system has greatly enhanced the potential for interactive computer aided design.

  9. Analysis of Interactive Conflict Resolution Tool Usage in a Mixed Equipage Environment

    Science.gov (United States)

    Homola, Jeffrey; Morey, Susan; Cabrall, Christopher; Martin, Lynne; Mercer, Joey; Prevot, Thomas

    2013-01-01

    A human-in-the-loop simulation was conducted that examined separation assurance concepts in varying levels of traffic density with mixtures of aircraft equipage and automation. This paper's analysis focuses on one of the experimental conditions in which traffic levels were approximately fifty percent higher than today, and approximately fifty percent of the traffic within the test area were equipped with data communications (data comm) capabilities. The other fifty percent of the aircraft required control by voice much like today. Within this environment, the air traffic controller participants were provided access to tools and automation designed to support the primary task of separation assurance that are currently unavailable. Two tools were selected for analysis in this paper: 1) a pre-probed altitude fly-out menu that provided instant feedback of conflict probe results for a range of altitudes, and 2) an interactive auto resolver that provided on-demand access to an automation-generated conflict resolution trajectory. Although encouraged, use of the support tools was not required; the participants were free to use the tools as they saw fit, and they were also free to accept, reject, or modify the resolutions offered by the automation. This mode of interaction provided a unique opportunity to examine exactly when and how these tools were used, as well as how acceptable the resolutions were. Results showed that the participants used the pre-probed altitude fly-out menu in 14% of conflict cases and preferred to use it in a strategic timeframe on data comm equipped and level flight aircraft. The interactive auto resolver was also used in a primarily strategic timeframe on 22% of conflicts and that their preference was to use it on conflicts involving data comm equipped aircraft as well. Of the 258 resolutions displayed, 46% were implemented and 54% were not. The auto resolver was rated highly by participants in terms of confidence and preference. Factors such as

  10. ISAC - A tool for aeroservoelastic modeling and analysis. [Interaction of Structures, Aerodynamics, and Control

    Science.gov (United States)

    Adams, William M., Jr.; Hoadley, Sherwood T.

    1993-01-01

    This paper discusses the capabilities of the Interaction of Structures, Aerodynamics, and Controls (ISAC) system of program modules. The major modeling, analysis, and data management components of ISAC are identified. Equations of motion are displayed for a Laplace-domain representation of the unsteady aerodynamic forces. Options for approximating a frequency-domain representation of unsteady aerodynamic forces with rational functions of the Laplace variable are shown. Linear time invariant state-space equations of motion that result are discussed. Model generation and analyses of stability and dynamic response characteristics are shown for an aeroelastic vehicle which illustrate some of the capabilities of ISAC as a modeling and analysis tool for aeroelastic applications.

  11. Frontal affinity chromatography: A unique research tool for biospecific interaction that promotes glycobiology

    Science.gov (United States)

    KASAI, Kenichi

    2014-01-01

    Combination of bioaffinity and chromatography gave birth to affinity chromatography. A further combination with frontal analysis resulted in creation of frontal affinity chromatography (FAC). This new versatile research tool enabled detailed analysis of weak interactions that play essential roles in living systems, especially those between complex saccharides and saccharide-binding proteins. FAC now becomes the best method for the investigation of saccharide-binding proteins (lectins) from viewpoints of sensitivity, accuracy, and efficiency, and is contributing greatly to the development of glycobiology. It opened a door leading to deeper understanding of the significance of saccharide recognition in life. The theory is also concisely described. PMID:25169774

  12. INTERACTIONS: DESIGN, IMPLEMENTATION AND EVALUATION OF A COMPUTATIONAL TOOL FOR TEACHING INTERMOLECULAR FORCES IN HIGHER EDUCATION

    Directory of Open Access Journals (Sweden)

    Francisco Geraldo Barbosa

    2015-12-01

    Full Text Available Intermolecular forces are a useful concept that can explain the attraction between particulate matter as well as numerous phenomena in our lives such as viscosity, solubility, drug interactions, and dyeing of fibers. However, studies show that students have difficulty understanding this important concept, which has led us to develop a free educational software in English and Portuguese. The software can be used interactively by teachers and students, thus facilitating better understanding. Professors and students, both graduate and undergraduate, were questioned about the software quality and its intuitiveness of use, facility of navigation, and pedagogical application using a Likert scale. The results led to the conclusion that the developed computer application can be characterized as an auxiliary tool to assist teachers in their lectures and students in their learning process of intermolecular forces.

  13. flowAI: automatic and interactive anomaly discerning tools for flow cytometry data.

    Science.gov (United States)

    Monaco, Gianni; Chen, Hao; Poidinger, Michael; Chen, Jinmiao; de Magalhães, João Pedro; Larbi, Anis

    2016-08-15

    Flow cytometry (FCM) is widely used in both clinical and basic research to characterize cell phenotypes and functions. The latest FCM instruments analyze up to 20 markers of individual cells, producing high-dimensional data. This requires the use of the latest clustering and dimensionality reduction techniques to automatically segregate cell sub-populations in an unbiased manner. However, automated analyses may lead to false discoveries due to inter-sample differences in quality and properties. We present an R package, flowAI, containing two methods to clean FCM files from unwanted events: (i) an automatic method that adopts algorithms for the detection of anomalies and (ii) an interactive method with a graphical user interface implemented into an R shiny application. The general approach behind the two methods consists of three key steps to check and remove suspected anomalies that derive from (i) abrupt changes in the flow rate, (ii) instability of signal acquisition and (iii) outliers in the lower limit and margin events in the upper limit of the dynamic range. For each file analyzed our software generates a summary of the quality assessment from the aforementioned steps. The software presented is an intuitive solution seeking to improve the results not only of manual but also and in particular of automatic analysis on FCM data. R source code available through Bioconductor: http://bioconductor.org/packages/flowAI/ CONTACTS: mongianni1@gmail.com or Anis_Larbi@immunol.a-star.edu.sg Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  14. Extending Graphic Statics for User-Controlled Structural Morphogenesis

    OpenAIRE

    Fivet, Corentin; Zastavni, Denis; Cap, Jean-François; Structural Morphology Group International Seminar 2011

    2011-01-01

    The first geometrical definitions of any structure are of primary importance when considering pertinence and efficiency in structural design processes. Engineering history has taught us how graphic statics can be a very powerful tool since it allows the designer to take shapes and forces into account simultaneously. However, current and past graphic statics methods are more suitable for analysis than structural morphogenesis. This contribution introduces new graphical methods that can supp...

  15. OAP- OFFICE AUTOMATION PILOT GRAPHICS DATABASE SYSTEM

    Science.gov (United States)

    Ackerson, T.

    1994-01-01

    The Office Automation Pilot (OAP) Graphics Database system offers the IBM PC user assistance in producing a wide variety of graphs and charts. OAP uses a convenient database system, called a chartbase, for creating and maintaining data associated with the charts, and twelve different graphics packages are available to the OAP user. Each of the graphics capabilities is accessed in a similar manner. The user chooses creation, revision, or chartbase/slide show maintenance options from an initial menu. The user may then enter or modify data displayed on a graphic chart. The cursor moves through the chart in a "circular" fashion to facilitate data entries and changes. Various "help" functions and on-screen instructions are available to aid the user. The user data is used to generate the graphics portion of the chart. Completed charts may be displayed in monotone or color, printed, plotted, or stored in the chartbase on the IBM PC. Once completed, the charts may be put in a vector format and plotted for color viewgraphs. The twelve graphics capabilities are divided into three groups: Forms, Structured Charts, and Block Diagrams. There are eight Forms available: 1) Bar/Line Charts, 2) Pie Charts, 3) Milestone Charts, 4) Resources Charts, 5) Earned Value Analysis Charts, 6) Progress/Effort Charts, 7) Travel/Training Charts, and 8) Trend Analysis Charts. There are three Structured Charts available: 1) Bullet Charts, 2) Organization Charts, and 3) Work Breakdown Structure (WBS) Charts. The Block Diagram available is an N x N Chart. Each graphics capability supports a chartbase. The OAP graphics database system provides the IBM PC user with an effective means of managing data which is best interpreted as a graphic display. The OAP graphics database system is written in IBM PASCAL 2.0 and assembler for interactive execution on an IBM PC or XT with at least 384K of memory, and a color graphics adapter and monitor. Printed charts require an Epson, IBM, OKIDATA, or HP Laser

  16. Can social support work virtually? Evaluation of rheumatoid arthritis patients' experiences with an interactive online tool.

    Science.gov (United States)

    Kostova, Zlatina; Caiata-Zufferey, Maria; Schulz, Peter J

    2015-01-01

    There is strong empirical evidence that the support that chronic patients receive from their environment is fundamental for the way they cope with physical and psychological suffering. Nevertheless, in the case of rheumatoid arthritis (RA), providing the appropriate social support is still a challenge, and such support has often proven to be elusive and unreliable in helping patients to manage the disease. To explore whether and how social support for RA patients can be provided online, and to assess the conditions under which such support is effective. An online support tool was designed to provide patients with both tailored information and opportunities to interact online with health professionals and fellow sufferers. The general purpose was to identify where the support provided did - or did not - help patients, and to judge whether the determinants of success lay more within patients - their engagement and willingness to participate - or within the design of the website itself. The present study reports qualitative interviews with 19 users of the tool. A more specific purpose was to elaborate qualitatively on results from a quantitative survey of users, which indicated that any positive impact was confined to practical matters of pain management rather than extending to more fundamental psychological outcomes such as acceptance. Overall, online learning and interaction can do much to help patients with the everyday stresses of their disease; however, its potential for more durable positive impact depends on various individual characteristics such as personality traits, existing social networks, and the severity and longevity of the disease.

  17. Mathematical structures for computer graphics

    CERN Document Server

    Janke, Steven J

    2014-01-01

    A comprehensive exploration of the mathematics behind the modeling and rendering of computer graphics scenes Mathematical Structures for Computer Graphics presents an accessible and intuitive approach to the mathematical ideas and techniques necessary for two- and three-dimensional computer graphics. Focusing on the significant mathematical results, the book establishes key algorithms used to build complex graphics scenes. Written for readers with various levels of mathematical background, the book develops a solid foundation for graphics techniques and fills in relevant grap

  18. Numerical tool development of fluid-structure interactions for investigation of obstructive sleep apnea

    Science.gov (United States)

    Huang, Chien-Jung; White, Susan; Huang, Shao-Ching; Mallya, Sanjay; Eldredge, Jeff

    2016-11-01

    Obstructive sleep apnea (OSA) is a medical condition characterized by repetitive partial or complete occlusion of the airway during sleep. The soft tissues in the upper airway of OSA patients are prone to collapse under the low pressure loads incurred during breathing. The ultimate goal of this research is the development of a versatile numerical tool for simulation of air-tissue interactions in the patient specific upper airway geometry. This tool is expected to capture several phenomena, including flow-induced vibration (snoring) and large deformations during airway collapse of the complex airway geometry in respiratory flow conditions. Here, we present our ongoing progress toward this goal. To avoid mesh regeneration, for flow model, a sharp-interface embedded boundary method is used on Cartesian grids for resolving the fluid-structure interface, while for the structural model, a cut-cell finite element method is used. Also, to properly resolve large displacements, non-linear elasticity model is used. The fluid and structure solvers are connected with the strongly coupled iterative algorithm. The parallel computation is achieved with the numerical library PETSc. Some two- and three- dimensional preliminary results are shown to demonstrate the ability of this tool.

  19. PageMan: An interactive ontology tool to generate, display, and annotate overview graphs for profiling experiments

    Directory of Open Access Journals (Sweden)

    Hannah Matthew A

    2006-12-01

    Full Text Available Abstract Background Microarray technology has become a widely accepted and standardized tool in biology. The first microarray data analysis programs were developed to support pair-wise comparison. However, as microarray experiments have become more routine, large scale experiments have become more common, which investigate multiple time points or sets of mutants or transgenics. To extract biological information from such high-throughput expression data, it is necessary to develop efficient analytical platforms, which combine manually curated gene ontologies with efficient visualization and navigation tools. Currently, most tools focus on a few limited biological aspects, rather than offering a holistic, integrated analysis. Results Here we introduce PageMan, a multiplatform, user-friendly, and stand-alone software tool that annotates, investigates, and condenses high-throughput microarray data in the context of functional ontologies. It includes a GUI tool to transform different ontologies into a suitable format, enabling the user to compare and choose between different ontologies. It is equipped with several statistical modules for data analysis, including over-representation analysis and Wilcoxon statistical testing. Results are exported in a graphical format for direct use, or for further editing in graphics programs. PageMan provides a fast overview of single treatments, allows genome-level responses to be compared across several microarray experiments covering, for example, stress responses at multiple time points. This aids in searching for trait-specific changes in pathways using mutants or transgenics, analyzing development time-courses, and comparison between species. In a case study, we analyze the results of publicly available microarrays of multiple cold stress experiments using PageMan, and compare the results to a previously published meta-analysis. PageMan offers a complete user's guide, a web-based over-representation analysis as

  20. Fault tree graphics

    International Nuclear Information System (INIS)

    Bass, L.; Wynholds, H.W.; Porterfield, W.R.

    1975-01-01

    Described is an operational system that enables the user, through an intelligent graphics terminal, to construct, modify, analyze, and store fault trees. With this system, complex engineering designs can be analyzed. This paper discusses the system and its capabilities. Included is a brief discussion of fault tree analysis, which represents an aspect of reliability and safety modeling

  1. Mathematical Graphic Organizers

    Science.gov (United States)

    Zollman, Alan

    2009-01-01

    As part of a math-science partnership, a university mathematics educator and ten elementary school teachers developed a novel approach to mathematical problem solving derived from research on reading and writing pedagogy. Specifically, research indicates that students who use graphic organizers to arrange their ideas improve their comprehension…

  2. Comics & Graphic Novels

    Science.gov (United States)

    Cleaver, Samantha

    2008-01-01

    Not so many years ago, comic books in school were considered the enemy. Students caught sneaking comics between the pages of bulky--and less engaging--textbooks were likely sent to the principal. Today, however, comics, including classics such as "Superman" but also their generally more complex, nuanced cousins, graphic novels, are not only…

  3. Integrated system for production of neutronics and photonics calculational constants. Major neutron-induced interactions (Z less than or equal to 55): graphical, experimental data

    International Nuclear Information System (INIS)

    Cullen, D.E.; Howerton, R.J.; MacGregor, M.H.; Perkins, S.T.

    1976-01-01

    This report (vol. 7) presents graphs of major neutron-induced interaction cross sections in the Experimental Cross Section Information Library (ECSIL) as of July 4, 1976. It consists primarily of interactions where a single data set contains enough points to show cross-section behavior. In contrast, vol. 8 of this UCRL-50400 series consists of interactions where more than one data set is needed to show cross section behavior. Thus, you can find the total, elastic, capture, and fission cross sections (along with the parameters anti ν, α, and eta) in vol. 7 and all other reactions in vol. 8. Data are plotted with associated cross section error bars (when given) and compared with the Evaluated Nuclear Data Library (ENDL) as of July 4, 1976. The plots are arranged in ascending order of atomic number (Z) and atomic weight (A). Part A contains the plots for Z = 1 to 55; Part B contains the plots for Z greater than 55

  4. Integrated system for production of neutronics and photonics calculational constants. Major neutron-induced interactions (Z less than or equal to 55): graphical, experimental data

    Energy Technology Data Exchange (ETDEWEB)

    Cullen, D.E.; Howerton, R.J.; MacGregor, M.H.; Perkins, S.T.

    1976-07-04

    This report (vol. 7) presents graphs of major neutron-induced interaction cross sections in the Experimental Cross Section Information Library (ECSIL) as of July 4, 1976. It consists primarily of interactions where a single data set contains enough points to show cross-section behavior. In contrast, vol. 8 of this UCRL-50400 series consists of interactions where more than one data set is needed to show cross section behavior. Thus, you can find the total, elastic, capture, and fission cross sections (along with the parameters anti ..nu.., ..cap alpha.., and eta) in vol. 7 and all other reactions in vol. 8. Data are plotted with associated cross section error bars (when given) and compared with the Evaluated Nuclear Data Library (ENDL) as of July 4, 1976. The plots are arranged in ascending order of atomic number (Z) and atomic weight (A). Part A contains the plots for Z = 1 to 55; Part B contains the plots for Z greater than 55.

  5. Stone tools from the ancient Tongan state reveal prehistoric interaction centers in the Central Pacific

    Science.gov (United States)

    Clark, Geoffrey R.; Reepmeyer, Christian; Melekiola, Nivaleti; Woodhead, Jon; Dickinson, William R.; Martinsson-Wallin, Helene

    2014-07-01

    Tonga was unique in the prehistoric Pacific for developing a maritime state that integrated the archipelago under a centralized authority and for undertaking long-distance economic and political exchanges in the second millennium A.D. To establish the extent of Tonga's maritime polity, we geochemically analyzed stone tools excavated from the central places of the ruling paramounts, particularly lithic artifacts associated with stone-faced chiefly tombs. The lithic networks of the Tongan state focused on Samoa and Fiji, with one adze sourced to the Society Islands 2,500 km from Tongatapu. To test the hypothesis that nonlocal lithics were especially valued by Tongan elites and were an important source of political capital, we analyzed prestate lithics from Tongatapu and stone artifacts from Samoa. In the Tongan state, 66% of worked stone tools were long-distance imports, indicating that interarchipelago connections intensified with the development of the Tongan polity after A.D. 1200. In contrast, stone tools found in Samoa were from local sources, including tools associated with a monumental structure contemporary with the Tongan state. Network analysis of lithics entering the Tongan state and of the distribution of Samoan adzes in the Pacific identified a centralized polity and the products of specialized lithic workshops, respectively. These results indicate that a significant consequence of social complexity was the establishment of new types of specialized sites in distant geographic areas. Specialized sites were loci of long-distance interaction and formed important centers for the transmission of information, people, and materials in prehistoric Oceania.

  6. Modeling The Interaction Effects Between Tools And The Work Piece For Metal Forming Processes

    International Nuclear Information System (INIS)

    Franzke, Martin; Puchhala, Sreedhar; Dackweiler, Harald

    2007-01-01

    In metal forming processes especially in cold forming, elastic deformation of the tools has a big impact on the final shape of the work-piece. Computation of such processes considering the plastic effects of the work-piece and elastic deformations of the tools at a time in a single FE model complicates to manage the convergence criteria. This situation is even aggravated if the contact situations (between working and support rolls) have to be considered in the simulation, which requires a very fine discretization of the contact zones of both the tool and work piece. This paper presents recently developed concept which meets the above mentioned demands very effectively. Within this concept, the computation of the elastic effects of the tools is separated from the process simulation (which considers elastic-plastic effects of the work-piece). Both simulations are coupled via automatic data interchange, which is bi-directional, because both simulations influence each other. The advantages of this concept include a quite easy to handle contact situations in process simulation, smaller stiffness matrix compared to single model approach and good convergence of the computation. This concept is highly generalized and successfully applied to simulate rolling, drawing, extrusion and forging processes. The above mentioned concept is being implemented into the FE package PEP and LARSTRAN/SHAPE. Rolling experiments are conducted in duo and quarto configuration. Optical three-dimensional digitalizing system was used to measure the deformations within the machine and work-piece profile. These results are used for the validation of FE simulations. This work is being sponsored by the German Research Foundation (DFG) through the project ''Interaction effects between processes and structures-SPP1180''

  7. Web mapping: tools and solutions for creating interactive maps of forestry interest

    Directory of Open Access Journals (Sweden)

    Notarangelo G

    2011-12-01

    Full Text Available The spread of geobrowsers as tools for displaying geographically referenced information provides insights and opportunities to those who, not being specialists in Geographic Information Systems, want to take advantage from exploration and communication power offered by these software. Through the use of web services such as Google Maps and the use of suitable markup languages, one can create interactive maps starting from highly heterogeneous data and information. These interactive maps can also be easily distributed and shared with Internet users, because they do not need to use proprietary software nor special skills but only a web browser. Unlike the maps created with GIS, whose output usually is a static image, the interactive maps retain all their features to users advantage. This paper describes a web application that, using the Keyhole Markup Language and the free service of Google Maps, produces choropleth maps relating to some forest indicators estimated by the last Italian National Forest Inventory. The creation of a map is done through a simple and intuitive interface. The maps created by users can be downloaded as KML file and can be viewed or modified via the freeware application Google Earth or free and open source GIS software like Quantum GIS. The web application is free and available at www.ricercaforestale.it.

  8. GRASP/Ada: Graphical Representations of Algorithms, Structures, and Processes for Ada. The development of a program analysis environment for Ada: Reverse engineering tools for Ada, task 2, phase 3

    Science.gov (United States)

    Cross, James H., II

    1991-01-01

    The main objective is the investigation, formulation, and generation of graphical representations of algorithms, structures, and processes for Ada (GRASP/Ada). The presented task, in which various graphical representations that can be extracted or generated from source code are described and categorized, is focused on reverse engineering. The following subject areas are covered: the system model; control structure diagram generator; object oriented design diagram generator; user interface; and the GRASP library.

  9. Computer communications and graphics for clinical radiology

    International Nuclear Information System (INIS)

    Rhodes, M.L.; Azzawi, Y.; Tivattanasuk, E.S.; Pang, A.T.; Ly, K.; Panicker, H.

    1985-01-01

    Computer graphics has many forms. When applied in medicine, it can range from simple two dimensional charts and graphs to rendering of three-dimensional scenes. Computer graphic displays of molecular or large anatomic structures have been used to great advantage by numerous medical researchers. In addition, graphic presentations can be dynamic where displays are controlled by physician-user commands, or the presentations can be static, where views are recorded in discrete frames for later distribution or permanent archival. In medicine both interactive and static forms of computer graphics have their proper place in the effective delivery of health care. Computer graphics, however, changes constantly in the area of software techniques, hardware improvements and its clinical application. What may be medically appropriate today in the use of computer graphics can soon become inadequate and well behind the new advances that so quickly follow. In this paper the key feature of computer communication is discussed that aids in the clinical utility of computer graphics in medicine. It is distribution. Distribution in terms of instantaneous computer graphic software updates and more importantly, distribution of meaningful three-dimensional presentations to referring physicians. Physicians who, working in their private offices, have no routine access to medical work stations. In this environment three dimensional presentations of anatomy are static in nature, but must deliver realistic views of critical structures. This paper outlines how computer communication provides the essential ingredient to the provision of this service. As an illustration, the electronic distribution of software to generate three dimensional views of complex anatomoic structures is discussed. Sample views are included

  10. gRINN: a tool for calculation of residue interaction energies and protein energy network analysis of molecular dynamics simulations.

    Science.gov (United States)

    Serçinoglu, Onur; Ozbek, Pemra

    2018-05-25

    Atomistic molecular dynamics (MD) simulations generate a wealth of information related to the dynamics of proteins. If properly analyzed, this information can lead to new insights regarding protein function and assist wet-lab experiments. Aiming to identify interactions between individual amino acid residues and the role played by each in the context of MD simulations, we present a stand-alone software called gRINN (get Residue Interaction eNergies and Networks). gRINN features graphical user interfaces (GUIs) and a command-line interface for generating and analyzing pairwise residue interaction energies and energy correlations from protein MD simulation trajectories. gRINN utilizes the features of NAMD or GROMACS MD simulation packages and automatizes the steps necessary to extract residue-residue interaction energies from user-supplied simulation trajectories, greatly simplifying the analysis for the end-user. A GUI, including an embedded molecular viewer, is provided for visualization of interaction energy time-series, distributions, an interaction energy matrix, interaction energy correlations and a residue correlation matrix. gRINN additionally offers construction and analysis of Protein Energy Networks, providing residue-based metrics such as degrees, betweenness-centralities, closeness centralities as well as shortest path analysis. gRINN is free and open to all users without login requirement at http://grinn.readthedocs.io.

  11. 2 D 1/2 graphical benchmark

    International Nuclear Information System (INIS)

    Brochard, P.; Colin De Verdiere, G.; Nomine, J.P.; Perros, J.P.

    1993-01-01

    Within the framework of the development of a new version of the Psyche software, the author reports a benchmark study on different graphical libraries and systems and on the Psyche application. The author outlines the current context of development of graphical tools which still lacks of standardisation. This makes the comparison somehow limited and finally related to envisaged applications. The author presents the various systems and libraries, test principles, and characteristics of machines. Results and interpretations are then presented with reference to faced problems

  12. Free, cross-platform gRaphical software

    DEFF Research Database (Denmark)

    Dethlefsen, Claus

    2006-01-01

    -recursive graphical models, and models defined using the BUGS language. Today, there exists a wide range of packages to support the analysis of data using graphical models. Here, we focus on Open Source software, making it possible to extend the functionality by integrating these packages into more general tools. We...... will attempt to give an overview of the available Open Source software, with focus on the gR project. This project was launched in 2002 to make facilities in R for graphical modelling. Several R packages have been developed within the gR project both for display and analysis of graphical models...

  13. Integrated system for production of neutronics and photonics calculational constants. Supplemental neutron-induced interactions (Z less than or equal to 35): graphical, experimental data

    International Nuclear Information System (INIS)

    Cullen, D.E.; Howerton, R.J.; MacGregor, M.H.; Perkins, S.T.

    1976-01-01

    This report (Vol. 8) presents graphs of supplemental neutron-induced cross sections in the Experimental Cross Section Information Library (ECSIL) as of July 4, 1976. It consists of interactions where more than one data set is needed to show cross-section behavior. In contrast, Vol. 7 of this UCRL-50400 series consists primarily of interactions where a single data set contains enough points to show cross-section behavior. In Vol. 7 can be found the total, elastic, capture, and fission cross sections (along with the parameters anti ν, α, and eta). Volume 8 contains all other reactions. Data are plotted with associated cross-section error bars (when given) and compared with the Evaluated Nuclear Data Library (ENDL) as of July 4, 1976. The plots are arranged in ascending order of atomic number (Z) and atomic weight (A). Part A contains the plots for Z = 1 to 35; Part B contains the plots for Z greater than 35

  14. Development of Methodologies, Metrics, and Tools for Investigating Human-Robot Interaction in Space Robotics

    Science.gov (United States)

    Ezer, Neta; Zumbado, Jennifer Rochlis; Sandor, Aniko; Boyer, Jennifer

    2011-01-01

    Human-robot systems are expected to have a central role in future space exploration missions that extend beyond low-earth orbit [1]. As part of a directed research project funded by NASA s Human Research Program (HRP), researchers at the Johnson Space Center have started to use a variety of techniques, including literature reviews, case studies, knowledge capture, field studies, and experiments to understand critical human-robot interaction (HRI) variables for current and future systems. Activities accomplished to date include observations of the International Space Station s Special Purpose Dexterous Manipulator (SPDM), Robonaut, and Space Exploration Vehicle (SEV), as well as interviews with robotics trainers, robot operators, and developers of gesture interfaces. A survey of methods and metrics used in HRI was completed to identify those most applicable to space robotics. These methods and metrics included techniques and tools associated with task performance, the quantification of human-robot interactions and communication, usability, human workload, and situation awareness. The need for more research in areas such as natural interfaces, compensations for loss of signal and poor video quality, psycho-physiological feedback, and common HRI testbeds were identified. The initial findings from these activities and planned future research are discussed. Human-robot systems are expected to have a central role in future space exploration missions that extend beyond low-earth orbit [1]. As part of a directed research project funded by NASA s Human Research Program (HRP), researchers at the Johnson Space Center have started to use a variety of techniques, including literature reviews, case studies, knowledge capture, field studies, and experiments to understand critical human-robot interaction (HRI) variables for current and future systems. Activities accomplished to date include observations of the International Space Station s Special Purpose Dexterous Manipulator

  15. Fast Sparse Level Sets on Graphics Hardware

    NARCIS (Netherlands)

    Jalba, Andrei C.; Laan, Wladimir J. van der; Roerdink, Jos B.T.M.

    The level-set method is one of the most popular techniques for capturing and tracking deformable interfaces. Although level sets have demonstrated great potential in visualization and computer graphics applications, such as surface editing and physically based modeling, their use for interactive

  16. On Repairing Generated Behaviors for Graphical Characters

    DEFF Research Database (Denmark)

    Corradini, Andrea; Mehta, Manish

    2016-01-01

    In this paper, we continue our work on the creation of artificial intelligence (AI) behaviors for graphical interactive characters by novice users. We refer to novice users as any persons who do not have any particular skills, training and experience in both programming and design. The focus...

  17. Harvesting graphics power for MD simulations

    NARCIS (Netherlands)

    van Meel, J.A.; Arnold, A.; Frenkel, D.; Portegies Zwart, S.F.; Belleman, R.G.

    2008-01-01

    We discuss an implementation of molecular dynamics (MD) simulations on a graphic processing unit (GPU) in the NVIDIA CUDA language. We tested our code on a modern GPU, the NVIDIA GeForce 8800 GTX. Results for two MD algorithms suitable for short-ranged and long-ranged interactions, and a

  18. Harvesting graphics power for MD simulations

    NARCIS (Netherlands)

    Meel, J.A. van; Arnold, A.; Frenkel, D.; Portegies Zwart, S.F.; Belleman, R.G.

    We discuss an implementation of molecular dynamics (MD) simulations on a graphic processing unit (GPU) in the NVIDIA CUDA language. We tested our code on a modern GPU, the NVIDIA GeForce 8800 GTX. Results for two MD algorithms suitable for short-ranged and long-ranged interactions, and a

  19. Circuit II--A Conversational Graphical Interface.

    Science.gov (United States)

    Singer, Ronald A.

    1993-01-01

    Provides an overview of Circuit II, an interactive system that provides users with a graphical representation of an electronic circuit within which questions may be posed and manipulated, and discusses how mouse selections have analogous roles to certain natural language features, such as anaphora, deixis, and ellipsis. (13 references) (EA)

  20. Topographic Digital Raster Graphics - USGS DIGITAL RASTER GRAPHICS

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — USGS Topographic Digital Raster Graphics downloaded from LABINS (http://data.labins.org/2003/MappingData/drg/drg_stpl83.cfm). A digital raster graphic (DRG) is a...

  1. Mobile Manipulation, Tool Use, and Intuitive Interaction for Cognitive Service Robot Cosero

    Directory of Open Access Journals (Sweden)

    Jörg Stückler

    2016-11-01

    Full Text Available Cognitive service robots that shall assist persons in need in performing their activities of daily living have recently received much attention in robotics research.Such robots require a vast set of control and perception capabilities to provide useful assistance through mobile manipulation and human-robot interaction.In this article, we present hardware design, perception, and control methods for our cognitive service robot Cosero.We complement autonomous capabilities with handheld teleoperation interfaces on three levels of autonomy.The robot demonstrated various advanced skills, including the use of tools.With our robot we participated in the annual international RoboCup@Home competitions, winning them three times in a row.

  2. Interactive text mining with Pipeline Pilot: a bibliographic web-based tool for PubMed.

    Science.gov (United States)

    Vellay, S G P; Latimer, N E Miller; Paillard, G

    2009-06-01

    Text mining has become an integral part of all research in the medical field. Many text analysis software platforms support particular use cases and only those. We show an example of a bibliographic tool that can be used to support virtually any use case in an agile manner. Here we focus on a Pipeline Pilot web-based application that interactively analyzes and reports on PubMed search results. This will be of interest to any scientist to help identify the most relevant papers in a topical area more quickly and to evaluate the results of query refinement. Links with Entrez databases help both the biologist and the chemist alike. We illustrate this application with Leishmaniasis, a neglected tropical disease, as a case study.

  3. ProteinShop: A tool for interactive protein manipulation and steering

    Energy Technology Data Exchange (ETDEWEB)

    Crivelli, Silvia; Kreylos, Oliver; Max, Nelson; Hamann, Bernd; Bethel, Wes

    2004-05-25

    We describe ProteinShop, a new visualization tool that streamlines and simplifies the process of determining optimal protein folds. ProteinShop may be used at different stages of a protein structure prediction process. First, it can create protein configurations containing secondary structures specified by the user. Second, it can interactively manipulate protein fragments to achieve desired folds by adjusting the dihedral angles of selected coil regions using an Inverse Kinematics method. Last, it serves as a visual framework to monitor and steer a protein structure prediction process that may be running on a remote machine. ProteinShop was used to create initial configurations for a protein structure prediction method developed by a team that competed in CASP5. ProteinShop's use accelerated the process of generating initial configurations, reducing the time required from days to hours. This paper describes the structure of ProteinShop and discusses its main features.

  4. Ssecrett and neuroTrace: Interactive visualization and analysis tools for large-scale neuroscience data sets

    KAUST Repository

    Jeong, Wonki; Beyer, Johanna; Hadwiger, Markus; Blue, Rusty; Law, Charles; Vá zquez Reina, Amelio; Reid, Rollie Clay; Lichtman, Jeff W M D; Pfister, Hanspeter

    2010-01-01

    Recent advances in optical and electron microscopy let scientists acquire extremely high-resolution images for neuroscience research. Data sets imaged with modern electron microscopes can range between tens of terabytes to about one petabyte. These large data sizes and the high complexity of the underlying neural structures make it very challenging to handle the data at reasonably interactive rates. To provide neuroscientists flexible, interactive tools, the authors introduce Ssecrett and NeuroTrace, two tools they designed for interactive exploration and analysis of large-scale optical- and electron-microscopy images to reconstruct complex neural circuits of the mammalian nervous system. © 2010 IEEE.

  5. Ssecrett and neuroTrace: Interactive visualization and analysis tools for large-scale neuroscience data sets

    KAUST Repository

    Jeong, Wonki

    2010-05-01

    Recent advances in optical and electron microscopy let scientists acquire extremely high-resolution images for neuroscience research. Data sets imaged with modern electron microscopes can range between tens of terabytes to about one petabyte. These large data sizes and the high complexity of the underlying neural structures make it very challenging to handle the data at reasonably interactive rates. To provide neuroscientists flexible, interactive tools, the authors introduce Ssecrett and NeuroTrace, two tools they designed for interactive exploration and analysis of large-scale optical- and electron-microscopy images to reconstruct complex neural circuits of the mammalian nervous system. © 2010 IEEE.

  6. Pemrograman Graphical User Interface (GUI) Dengan Matlab Untuk Mendesain Alat Bantu Opersai Matematika

    OpenAIRE

    Butar Butar, Ronisah Putra

    2011-01-01

    Graphical User Interface ( GUI) is a application program orient visual which woke up with graphical obyek in the place of comand of text for the user interaction. Graphical User Interface ( GUI) in MATLAB embraced in a application of GUIDE ( Graphical User Interface Builder). In this paper will be discuss about how disagning a appliance assist mathematics operation with program of Graphical User Interface ( GUI) with MATLAB with aim to as one of the appliance alternative assist...

  7. Leveraging Google Geo Tools for Interactive STEM Education: Insights from the GEODE Project

    Science.gov (United States)

    Dordevic, M.; Whitmeyer, S. J.; De Paor, D. G.; Karabinos, P.; Burgin, S.; Coba, F.; Bentley, C.; St John, K. K.

    2016-12-01

    Web-based imagery and geospatial tools have transformed our ability to immerse students in global virtual environments. Google's suite of geospatial tools, such as Google Earth (± Engine), Google Maps, and Street View, allow developers and instructors to create interactive and immersive environments, where students can investigate and resolve common misconceptions in STEM concepts and natural processes. The GEODE (.net) project is developing digital resources to enhance STEM education. These include virtual field experiences (VFEs), such as an interactive visualization of the breakup of the Pangaea supercontinent, a "Grand Tour of the Terrestrial Planets," and GigaPan-based VFEs of sites like the Canadian Rockies. Web-based challenges, such as EarthQuiz (.net) and the "Fold Analysis Challenge," incorporate scaffolded investigations of geoscience concepts. EarthQuiz features web-hosted imagery, such as Street View, Photo Spheres, GigaPans, and Satellite View, as the basis for guided inquiry. In the Fold Analysis Challenge, upper-level undergraduates use Google Earth to evaluate a doubly-plunging fold at Sheep Mountain, WY. GEODE.net also features: "Reasons for the Seasons"—a Google Earth-based visualization that addresses misconceptions that abound amongst students, teachers, and the public, many of whom believe that seasonality is caused by large variations in Earth's distance from the Sun; "Plate Euler Pole Finder," which helps students understand rotational motion of tectonic plates on the globe; and "Exploring Marine Sediments Using Google Earth," an exercise that uses empirical data to explore the surficial distribution of marine sediments in the modern ocean. The GEODE research team includes the authors and: Heather Almquist, Cinzia Cervato, Gene Cooper, Helen Crompton, Terry Pavlis, Jen Piatek, Bill Richards, Jeff Ryan, Ron Schott, Barb Tewksbury, and their students and collaborating colleagues. We are supported by NSF DUE 1323419 and a Google Geo

  8. RankProdIt: A web-interactive Rank Products analysis tool

    Directory of Open Access Journals (Sweden)

    Laing Emma

    2010-08-01

    Full Text Available Abstract Background The first objective of a DNA microarray experiment is typically to generate a list of genes or probes that are found to be differentially expressed or represented (in the case of comparative genomic hybridizations and/or copy number variation between two conditions or strains. Rank Products analysis comprises a robust algorithm for deriving such lists from microarray experiments that comprise small numbers of replicates, for example, less than the number required for the commonly used t-test. Currently, users wishing to apply Rank Products analysis to their own microarray data sets have been restricted to the use of command line-based software which can limit its usage within the biological community. Findings Here we have developed a web interface to existing Rank Products analysis tools allowing users to quickly process their data in an intuitive and step-wise manner to obtain the respective Rank Product or Rank Sum, probability of false prediction and p-values in a downloadable file. Conclusions The online interactive Rank Products analysis tool RankProdIt, for analysis of any data set containing measurements for multiple replicated conditions, is available at: http://strep-microarray.sbs.surrey.ac.uk/RankProducts

  9. PREMIM and EMIM: tools for estimation of maternal, imprinting and interaction effects using multinomial modelling

    Directory of Open Access Journals (Sweden)

    Howey Richard

    2012-06-01

    Full Text Available Abstract Background Here we present two new computer tools, PREMIM and EMIM, for the estimation of parental and child genetic effects, based on genotype data from a variety of different child-parent configurations. PREMIM allows the extraction of child-parent genotype data from standard-format pedigree data files, while EMIM uses the extracted genotype data to perform subsequent statistical analysis. The use of genotype data from the parents as well as from the child in question allows the estimation of complex genetic effects such as maternal genotype effects, maternal-foetal interactions and parent-of-origin (imprinting effects. These effects are estimated by EMIM, incorporating chosen assumptions such as Hardy-Weinberg equilibrium or exchangeability of parental matings as required. Results In application to simulated data, we show that the inference provided by EMIM is essentially equivalent to that provided by alternative (competing software packages such as MENDEL and LEM. However, PREMIM and EMIM (used in combination considerably outperform MENDEL and LEM in terms of speed and ease of execution. Conclusions Together, EMIM and PREMIM provide easy-to-use command-line tools for the analysis of pedigree data, giving unbiased estimates of parental and child genotype relative risks.

  10. Developing an Interactive Data Visualization Tool to Assess the Impact of Decision Support on Clinical Operations.

    Science.gov (United States)

    Huber, Timothy C; Krishnaraj, Arun; Monaghan, Dayna; Gaskin, Cree M

    2018-05-18

    Due to mandates from recent legislation, clinical decision support (CDS) software is being adopted by radiology practices across the country. This software provides imaging study decision support for referring providers at the point of order entry. CDS systems produce a large volume of data, providing opportunities for research and quality improvement. In order to better visualize and analyze trends in this data, an interactive data visualization dashboard was created using a commercially available data visualization platform. Following the integration of a commercially available clinical decision support product into the electronic health record, a dashboard was created using a commercially available data visualization platform (Tableau, Seattle, WA). Data generated by the CDS were exported from the data warehouse, where they were stored, into the platform. This allowed for real-time visualization of the data generated by the decision support software. The creation of the dashboard allowed the output from the CDS platform to be more easily analyzed and facilitated hypothesis generation. Integrating data visualization tools into clinical decision support tools allows for easier data analysis and can streamline research and quality improvement efforts.

  11. Enrichr: interactive and collaborative HTML5 gene list enrichment analysis tool.

    Science.gov (United States)

    Chen, Edward Y; Tan, Christopher M; Kou, Yan; Duan, Qiaonan; Wang, Zichen; Meirelles, Gabriela Vaz; Clark, Neil R; Ma'ayan, Avi

    2013-04-15

    System-wide profiling of genes and proteins in mammalian cells produce lists of differentially expressed genes/proteins that need to be further analyzed for their collective functions in order to extract new knowledge. Once unbiased lists of genes or proteins are generated from such experiments, these lists are used as input for computing enrichment with existing lists created from prior knowledge organized into gene-set libraries. While many enrichment analysis tools and gene-set libraries databases have been developed, there is still room for improvement. Here, we present Enrichr, an integrative web-based and mobile software application that includes new gene-set libraries, an alternative approach to rank enriched terms, and various interactive visualization approaches to display enrichment results using the JavaScript library, Data Driven Documents (D3). The software can also be embedded into any tool that performs gene list analysis. We applied Enrichr to analyze nine cancer cell lines by comparing their enrichment signatures to the enrichment signatures of matched normal tissues. We observed a common pattern of up regulation of the polycomb group PRC2 and enrichment for the histone mark H3K27me3 in many cancer cell lines, as well as alterations in Toll-like receptor and interlukin signaling in K562 cells when compared with normal myeloid CD33+ cells. Such analyses provide global visualization of critical differences between normal tissues and cancer cell lines but can be applied to many other scenarios. Enrichr is an easy to use intuitive enrichment analysis web-based tool providing various types of visualization summaries of collective functions of gene lists. Enrichr is open source and freely available online at: http://amp.pharm.mssm.edu/Enrichr.

  12. Open|SpeedShop Graphical User Interface Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to create a new graphical user interface (GUI) for an existing parallel application performance and profiling tool, Open|SpeedShop. The current GUI has...

  13. Advanced diagnostic graphics

    International Nuclear Information System (INIS)

    Bray, M.A.; Petersen, R.J.; Clark, M.T.; Gertman, D.I.

    1981-01-01

    This paper reports US NRC-sponsored research at the Idaho National Engineering Laboratory (INEL) involving evaluation of computer-based diagnostic graphics. The specific targets of current evaluations are multivariate data display formats which may be used in Safety Parameter Display Systems (SPDS) being developed for nuclear power plant control rooms. The purpose of the work is to provide a basis for NRC action in regulating licensee SPDSs or later computer/cathode ray tube (CRT) applications in nuclear control rooms

  14. Graphic Grown Up

    Science.gov (United States)

    Kim, Ann

    2009-01-01

    It's no secret that children and YAs are clued in to graphic novels (GNs) and that comics-loving adults are positively giddy that this format is getting the recognition it deserves. Still, there is a whole swath of library card-carrying grown-up readers out there with no idea where to start. Splashy movies such as "300" and "Spider-Man" and their…

  15. Can Interactive Web-Based CAD Tools Improve the Learning of Engineering Drawing? A Case Study

    Science.gov (United States)

    Pando Cerra, Pablo; Suárez González, Jesús M.; Busto Parra, Bernardo; Rodríguez Ortiz, Diana; Álvarez Peñín, Pedro I.

    2014-01-01

    Many current Web-based learning environments facilitate the theoretical teaching of a subject but this may not be sufficient for those disciplines that require a significant use of graphic mechanisms to resolve problems. This research study looks at the use of an environment that can help students learn engineering drawing with Web-based CAD…

  16. Engineering graphics data entry for space station data base

    Science.gov (United States)

    Lacovara, R. C.

    1986-01-01

    The entry of graphical engineering data into the Space Station Data Base was examined. Discussed were: representation of graphics objects; representation of connectivity data; graphics capture hardware; graphics display hardware; site-wide distribution of graphics, and consolidation of tools and hardware. A fundamental assumption was that existing equipment such as IBM based graphics capture software and VAX networked facilities would be exploited. Defensible conclusions reached after study and simulations of use of these systems at the engineering level are: (1) existing IBM based graphics capture software is an adequate and economical means of entry of schematic and block diagram data for present and anticipated electronic systems for Space Station; (2) connectivity data from the aforementioned system may be incorporated into the envisioned Space Station Data Base with modest effort; (3) graphics and connectivity data captured on the IBM based system may be exported to the VAX network in a simple and direct fashion; (4) graphics data may be displayed site-wide on VT-125 terminals and lookalikes; (5) graphics hard-copy may be produced site-wide on various dot-matrix printers; and (6) the system may provide integrated engineering services at both the engineering and engineering management level.

  17. An Interactive Tool for Outdoor Computer Controlled Cultivation of Microalgae in a Tubular Photobioreactor System

    Directory of Open Access Journals (Sweden)

    Raquel Dormido

    2014-03-01

    Full Text Available This paper describes an interactive virtual laboratory for experimenting with an outdoor tubular photobioreactor (henceforth PBR for short. This virtual laboratory it makes possible to: (a accurately reproduce the structure of a real plant (the PBR designed and built by the Department of Chemical Engineering of the University of Almería, Spain; (b simulate a generic tubular PBR by changing the PBR geometry; (c simulate the effects of changing different operating parameters such as the conditions of the culture (pH, biomass concentration, dissolved O2, inyected CO2, etc.; (d simulate the PBR in its environmental context; it is possible to change the geographic location of the system or the solar irradiation profile; (e apply different control strategies to adjust different variables such as the CO2 injection, culture circulation rate or culture temperature in order to maximize the biomass production; (f simulate the harvesting. In this way, users can learn in an intuitive way how productivity is affected by any change in the design. It facilitates the learning of how to manipulate essential variables for microalgae growth to design an optimal PBR. The simulator has been developed with Easy Java Simulations, a freeware open-source tool developed in Java, specifically designed for the creation of interactive dynamic simulations.

  18. Career Opportunities in Computer Graphics.

    Science.gov (United States)

    Langer, Victor

    1983-01-01

    Reviews the impact of computer graphics on industrial productivity. Details the computer graphics technician curriculum at Milwaukee Area Technical College and the cooperative efforts of business and industry to fund and equip the program. (SK)

  19. A graphics based remote handling control system

    International Nuclear Information System (INIS)

    Leinemann, K.

    1984-08-01

    A control and simulation system with an interactive graphic man-machine interface is proposed for the articulated boom in JET. The system shall support 1. the study of boom movements in the planning phase, 2. the training of operators by appropriate simulations, 3. the programming of boom movements, and 4. the on-line control of the boom. A combination of computer graphic display and TV-images is proposed for providing optimum recognition of the actual situation and for echoing to the operator actions. (orig.) [de

  20. Graphical User Interface Programming in Introductory Computer Science.

    Science.gov (United States)

    Skolnick, Michael M.; Spooner, David L.

    Modern computing systems exploit graphical user interfaces for interaction with users; as a result, introductory computer science courses must begin to teach the principles underlying such interfaces. This paper presents an approach to graphical user interface (GUI) implementation that is simple enough for beginning students to understand, yet…