WorldWideScience

Sample records for gr dosage form

  1. [Pharmaceutical advice concerning different pharmaceutical dosage forms].

    Science.gov (United States)

    Szakonyi, Gergely; Zelkó, Romána

    2010-01-01

    The present paper summarizes the commonly applied types of drug uptake and the pharmacists' advice concerning a certain dosage form. The manuscript also deals with the modified release dosage forms and their abbreviations in the name of the marketing authorized products.

  2. Advances in solid dosage form manufacturing technology.

    Science.gov (United States)

    Andrews, Gavin P

    2007-12-15

    Currently, the pharmaceutical and healthcare industries are moving through a period of unparalleled change. Major multinational pharmaceutical companies are restructuring, consolidating, merging and more importantly critically assessing their competitiveness to ensure constant growth in an ever-more demanding market where the cost of developing novel products is continuously increasing. The pharmaceutical manufacturing processes currently in existence for the production of solid oral dosage forms are associated with significant disadvantages and in many instances provide many processing problems. Therefore, it is well accepted that there is an increasing need for alternative processes to dramatically improve powder processing, and more importantly to ensure that acceptable, reproducible solid dosage forms can be manufactured. Consequently, pharmaceutical companies are beginning to invest in innovative processes capable of producing solid dosage forms that better meet the needs of the patient while providing efficient manufacturing operations. This article discusses two emerging solid dosage form manufacturing technologies, namely hot-melt extrusion and fluidized hot-melt granulation.

  3. Amorphous drugs and dosage forms

    DEFF Research Database (Denmark)

    Grohganz, Holger; Löbmann, K.; Priemel, P.

    2013-01-01

    The transformation to an amorphous form is one of the most promising approaches to address the low solubility of drug compounds, the latter being an increasing challenge in the development of new drug candidates. However, amorphous forms are high energy solids and tend to recry stallize. New...... formulation principles are needed to ensure the stability of amorphous drug forms. The formation of solid dispersions is still the most investigated approach, but additional approaches are desirable to overcome the shortcomings of solid dispersions. Spatial separation by either coating or the use of micro-containers...... before single molecules are available for the formation of crystal nuclei, thus stabilizing the amorphous form....

  4. The characteristics of novel dosage forms

    Directory of Open Access Journals (Sweden)

    Milić-Aškrabić Jela

    2003-01-01

    Full Text Available The objective of pharmaceutical-technological development is to find a procedure of transforming an active substance (a drug into a drug dosage form which is not only acceptable for application, but also enables the active substance to be released following administration, pursuant to therapy objectives. The aim is that the concentration of the active substance in the action location rapidly reaches a therapeutic level and maintains an approximately constant level in the course of a particular time, according to the established therapeutic goal. The primary objective is to present the active ingredient (drug in the form and concentration/quantity that enables the corresponding therapeutic response, i.e. to control the site and rate of medicinal substance release from the drug, as well as the rate at which it reaches the membranes and surfaces to which it is absorbed, while applying a common method of administration. The procedures used to achieve this goal are becoming highly complex and demanding and are aiming at sophisticated drug delivery systems and functional packaging material. Development from the existing drug molecule, through the conventional drug dosage form, to a new system of drug "delivery" (novel delivery system, can improve the drug (active substance characteristics significantly in view of compliance (acceptability by the patient, safety and efficiency. The paper presents an overview of the most important examples of pharmaceutical forms with controlled release and advanced drug "carriers".

  5. [Oral films as perspective dosage form].

    Science.gov (United States)

    Walicová, Veronika; Gajdziok, Jan

    Oral films, namely buccal mucoadhesive films and orodispersible films represent innovative formulations for administration of a wide range of drugs. Oral films show many advantageous properties and are intended for systemic drug delivery or for local treatment of the oral mucosa. In both cases, the film represents a thin layer, which could be intended to adhere to the oral mucosa by means of mucoadhesion; or to rapid dissolution and subsequent swallowing without the need of liquid intake, in the case of orodispersible films. Main constitutive excipients are film-forming polymers, which must in the case of mucoadhesive forms remain on the mucosa within the required time interval. Oral films are currently available on the pharmaceutical market and could compete with conventional oral dosage forms in the future. oral cavity oral films buccal mucoadhesive films orodispersible films film-forming polymers.

  6. Microbial quality of some herbal solid dosage forms

    African Journals Online (AJOL)

    STORAGESEVER

    2010-03-15

    Mar 15, 2010 ... Key words: Microbial quality, herbal, contamination, solid dosage form ... The type of dosage form, packaging, manufacturing and expiration dates of subject solid herbal .... According to WHO report (2002), Salmonella food.

  7. 21 CFR 522.1222 - Ketamine hydrochloride injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ketamine hydrochloride injectable dosage forms. 522.1222 Section 522.1222 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... ANIMAL DRUGS § 522.1222 Ketamine hydrochloride injectable dosage forms. ...

  8. 21 CFR 520.1696 - Penicillin oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin oral dosage forms. 520.1696 Section 520.1696 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1696 Penicillin oral...

  9. 21 CFR 526.1696 - Penicillin intramammary dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin intramammary dosage forms. 526.1696 Section 526.1696 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS INTRAMAMMARY DOSAGE FORMS § 526.1696 Penicillin...

  10. 21 CFR 522.1660 - Oxytetracycline injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline injectable dosage forms. 522.1660 Section 522.1660 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 522.1660 Oxytetracycline injectable dosage forms. ...

  11. 21 CFR 520.905 - Fenbendazole oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Fenbendazole oral dosage forms. 520.905 Section 520.905 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Fenbendazole oral dosage forms. ...

  12. 21 CFR 520.45 - Albendazole oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Albendazole oral dosage forms. 520.45 Section 520.45 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.45 Albendazole oral...

  13. Automatic identification and normalization of dosage forms in drug monographs

    Science.gov (United States)

    2012-01-01

    Background Each day, millions of health consumers seek drug-related information on the Web. Despite some efforts in linking related resources, drug information is largely scattered in a wide variety of websites of different quality and credibility. Methods As a step toward providing users with integrated access to multiple trustworthy drug resources, we aim to develop a method capable of identifying drug's dosage form information in addition to drug name recognition. We developed rules and patterns for identifying dosage forms from different sections of full-text drug monographs, and subsequently normalized them to standardized RxNorm dosage forms. Results Our method represents a significant improvement compared with a baseline lookup approach, achieving overall macro-averaged Precision of 80%, Recall of 98%, and F-Measure of 85%. Conclusions We successfully developed an automatic approach for drug dosage form identification, which is critical for building links between different drug-related resources. PMID:22336431

  14. Buccal Dosage Forms: General Considerations for Pediatric Patients.

    Science.gov (United States)

    Montero-Padilla, Soledad; Velaga, Sitaram; Morales, Javier O

    2017-02-01

    The development of an appropriate dosage form for pediatric patients needs to take into account several aspects, since adult drug biodistribution differs from that of pediatrics. In recent years, buccal administration has become an attractive route, having different dosage forms under development including tablets, lozenges, films, and solutions among others. Furthermore, the buccal epithelium can allow quick access to systemic circulation, which could be used for a rapid onset of action. For pediatric patients, dosage forms to be placed in the oral cavity have higher requirements for palatability to increase acceptance and therapy compliance. Therefore, an understanding of the excipients required and their functions and properties needs to be particularly addressed. This review is focused on the differences and requirements relevant to buccal administration for pediatric patients (compared to adults) and how novel dosage forms can be less invasive and more acceptable alternatives.

  15. A benefit/risk approach towards selecting appropriate pharmaceutical dosage forms - an application for paediatric dosage form selection.

    Science.gov (United States)

    Sam, Tom; Ernest, Terry B; Walsh, Jennifer; Williams, Julie L

    2012-10-05

    The design and selection of new pharmaceutical dosage forms involves the careful consideration and balancing of a quality target product profile against technical challenges and development feasibility. Paediatric dosage forms present particular complexity due to the diverse patient population, patient compliance challenges and safety considerations of this vulnerable population. This paper presents a structured framework for assessing the comparative benefits and risks of different pharmaceutical design options against pre-determined criteria relating to (1) efficacy, (2) safety and (3) patient access. This benefit/risk framework has then been applied to three hypothetical, but realistic, scenarios for paediatric dosage forms in order to explore its utility in guiding dosage form design and formulation selection. The approach allows a rigorous, systematic and qualitative assessment of the merits and disadvantages of each dosage form option and helps identify mitigating strategies to modify risk. The application of a weighting and scoring system to the criteria depending on the specific case could further refine the analysis and aid decision-making. In this paper, one case study is scored for illustrative purposes. However, it is acknowledged that in real development scenarios, the generation of actual data considering the very specific situation for the patient/product/developer would come into play to drive decisions on the most appropriate dosage form strategy. Copyright © 2012 Elsevier B.V. All rights reserved.

  16. 76 FR 59023 - Oral Dosage Form New Animal Drugs; Tylosin

    Science.gov (United States)

    2011-09-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Tylosin AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  17. 77 FR 3927 - Oral Dosage Form New Animal Drugs; Deracoxib

    Science.gov (United States)

    2012-01-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Deracoxib AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  18. 76 FR 18648 - Oral Dosage Form New Animal Drugs; Robenacoxib

    Science.gov (United States)

    2011-04-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Robenacoxib AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  19. 76 FR 40808 - Oral Dosage Form New Animal Drugs; Amprolium

    Science.gov (United States)

    2011-07-12

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Amprolium AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  20. 77 FR 15960 - Oral Dosage Form New Animal Drugs; Pergolide

    Science.gov (United States)

    2012-03-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Pergolide AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  1. 75 FR 67031 - Oral Dosage Form New Animal Drugs; Domperidone

    Science.gov (United States)

    2010-11-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2010-N-0002] Oral Dosage Form New Animal Drugs; Domperidone AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  2. 76 FR 78149 - Oral Dosage Form New Animal Drugs; Estriol

    Science.gov (United States)

    2011-12-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Estriol AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  3. Pharmaceutical development of an intravenous dosage form of diacetylmorphine hydrochloride

    NARCIS (Netherlands)

    Klous, Marjolein G.; Nuijen, Bastiaan; van den Brink, Wim; van Ree, Jan M.; Beijnen, Jos H.

    2004-01-01

    A solid dosage form for multiple use was developed for parenteral administration of diacetylmorphine in a clinical trial on co-prescription of heroin to heroin addicts. A 300-mg/mL diacetylmorphine hydrochloride solution was lyophilised as 10-mL aliquots in 30-mL glass vials, to be reconstituted to

  4. 21 CFR 520.1448 - Monensin oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Monensin oral dosage forms. 520.1448 Section 520.1448 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... distance the spots travel from the starting line divided by the distance the solvent front travels from the...

  5. Formulation of Croton penduliflorus seed into tablet dosage form ...

    African Journals Online (AJOL)

    Formulation of Croton penduliflorus seed into tablet dosage form. GC Onunkwo. Abstract. No Abstract. Global Journal of Medical Sciences Vol. 5(1) 2006: 29-33. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/gjms.v5i1.10145.

  6. Formulation and evaluation of tablet dosage form of Hunteria ...

    African Journals Online (AJOL)

    The present study was aimed at formulating and evaluating tablet dosage form of Hunteria umbellata (HU) seed aqueous and purified extracts. HU seeds were dried, pulverized and the powder macerated in water to obtain aqueous extract, while alkaloidal extraction process was used to obtain purified extract. Extracts ...

  7. Biowaiver monographs for immediate release solid oral dosage forms: cimetidine.

    NARCIS (Netherlands)

    Jantratid, E; Prakongpan, S; Dressman, J B; Amidon, G L; Junginger, H E; Midha, K K; Barends, D M

    2006-01-01

    Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned

  8. Spectrophotometric Determination of Cilostazol in Tablet Dosage Form

    African Journals Online (AJOL)

    Purpose: To develop simple, rapid and selective spectrophotometric methods for the determination of cilostazol in tablet dosage form. Methods: Cilostazol was dissolved in 50 % methanol and its absorbance was scanned by ultraviolet (UV) spectrophotometry. Both linear regression equation and standard absorptivity were ...

  9. QR encoded smart oral dosage forms by inkjet printing.

    Science.gov (United States)

    Edinger, Magnus; Bar-Shalom, Daniel; Sandler, Niklas; Rantanen, Jukka; Genina, Natalja

    2018-01-30

    The use of inkjet printing (IJP) technology enables the flexible manufacturing of personalized medicine with the doses tailored for each patient. In this study we demonstrate, for the first time, the applicability of IJP in the production of edible dosage forms in the pattern of a quick response (QR) code. This printed pattern contains the drug itself and encoded information relevant to the patient and/or healthcare professionals. IJP of the active pharmaceutical ingredient (API)-containing ink in the pattern of QR code was performed onto a newly developed porous and flexible, but mechanically stable substrate with a good absorption capacity. The printing did not affect the mechanical properties of the substrate. The actual drug content of the printed dosage forms was in accordance with the encoded drug content. The QR encoded dosage forms had a good print definition without significant edge bleeding. They were readable by a smartphone even after storage in harsh conditions. This approach of efficient data incorporation and data storage combined with the use of smart devices can lead to safer and more patient-friendly drug products in the future. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Prevalence and trends of cellulosics in pharmaceutical dosage forms.

    Science.gov (United States)

    Mastropietro, David J; Omidian, Hossein

    2013-02-01

    Many studies have shown that cellulose derivatives (cellulosics) can provide various benefits when used in virtually all types of dosage forms. Nevertheless, the popularity of their use in approved drug products is rather unknown. This research reports the current prevalence and trends of use for 15 common cellulosics in prescription drug products. The cellulosics were powdered and microcrystalline cellulose (MCC), ethyl cellulose, hydroxypropyl cellulose (HPC), hydroxyethyl cellulose (HEC), hypromellose (HPMC), HPMC phthalate, HPMC acetate succinate, cellulose acetate (CA), CA phthalate, sodium (Na) and calcium (Ca) carboxymethylcellulose (CMC), croscarmellose sodium (XCMCNa), methyl cellulose, and low substituted HPC. The number of brand drug products utilizing each cellulosics was determined using the online drug index Rxlist. A total of 607 brand products were identified having one or more of the cellulosics as an active or inactive ingredient. An array of various dosage forms was identified and revealed HPMC and MCC to be the most utilized cellulosics in all products followed by XCMCNa and HPC. Many products contained two or more cellulosics in the formulation (42% containing two, 23% containing three, and 4% containing 4-5). The largest combination occurrence was HPMC with MCC. The use of certain cellulosics within different dosage form types was found to contain specific trends. All injectables utilized only CMCNa, and the same with all ophthalmic solutions utilizing HPMC, and otic suspensions utilizing HEC. Popularity and trends regarding cellulosics use may occur based on many factors including functionality, safety, availability, stability, and ease of manufacturing.

  11. Stability of pharmaceutical salts in solid oral dosage forms.

    Science.gov (United States)

    Nie, Haichen; Byrn, Stephen R; Zhou, Qi Tony

    2017-08-01

    Using pharmaceutical salts in solid dosage forms can raise stability concerns, especially salt dissociation which can adversely affect the product performance. Therefore, a thorough understanding of the salt instability encountered in solid-state formulations is imperative to ensure the product quality. The present article uses the fundamental theory of acid base, ionic equilibrium, relationship of pH and solubility as a starting point to illustrate and interpret the salt formation and salt disproportionation in pharmaceutical systems. The criteria of selecting the optimal salt form and the underlying theory of salt formation and disproportionation are reviewed in detail. Factors influencing salt stability in solid dosage forms are scrutinized and discussed with the case studies. In addition, both commonly used and innovative strategies for preventing salt dissociations in formulation, on storage and during manufacturing will be suggested herein. This article will provide formulation scientists and manufacturing engineers an insight into the mechanisms of salt disproportionation and salt formation, which can help them to avoid and solve the instability issues of pharmaceutical salts in the product design.

  12. Biowaiver monographs for immediate release solid oral dosage forms: efavirenz.

    Science.gov (United States)

    Cristofoletti, Rodrigo; Nair, Anita; Abrahamsson, Bertil; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James E; Shah, Vinod P; Dressman, Jennifer B

    2013-02-01

    Literature data pertaining to the decision to allow a waiver of in vivo bioequivalence testing for the approval of immediate-release (IR) solid oral dosage forms containing efavirenz as the only active pharmaceutical ingredient (API) are reviewed. Because of lack of conclusive data about efavirenz's permeability and its failure to comply with the "high solubility" criteria according to the Biopharmaceutics Classification System (BCS), the API can be classified as BCS Class II/IV. In line with the solubility characteristics, the innovator product does not meet the dissolution criteria for a "rapidly dissolving product." Furthermore, product variations containing commonly used excipients or in the manufacturing process have been reported to impact the rate and extent of efavirenz absorption. Despite its wide therapeutic index, subtherapeutic levels of efavirenz can lead to treatment failure and also facilitate the emergence of efavirenz-resistant mutants. For all these reasons, a biowaiver for IR solid oral dosage forms containing efavirenz as the sole API is not scientifically justified for reformulated or multisource drug products. Copyright © 2012 Wiley Periodicals, Inc.

  13. Gamma scintigraphy in the evaluation of pharmaceutical dosage forms

    International Nuclear Information System (INIS)

    Davis, S.S.; Hardy, J.G.; Newman, S.P.; Wilding, I.R.

    1992-01-01

    Gamma-scintigraphy is applied extensively in the development and evaluation of pharmaceutical drug delivery systems. It is used particularly for monitoring formulations in the gastrointestinal and respiratory tracts. The radiolabelling is generally achieved by the incorporation of an appropriate technetium-99m or indium-111 labelled radiopharmaceutical into the formulation. In the case of complex dosage forms, such as enteric-coated tablets, labelling is best undertaken by the addition of a non-radioactive tracer such as samarium-152 or erbium-170 followed by neutron activation of the final product. Systems investigated include tablets and multiparticulates for oral administration, enemas and suppositories, metered dose inhalers and nebulisers, and nasal sprays and drops. Gamma-scintigraphy provides information on the deposition, dispersion and movement of the formulation. The combination of such studies with the assay of drug levels in blood or urine specimens, pharmacoscintigraphy, provides information concerning the sites of drug release and absorption. Data acquired from the scintigraphic evaluation of pharmaceutical dosage forms are now being used increasingly at all stages of product development, from the assessment of prototype delivery systems to supporting the product licence application. (orig.)

  14. Emergence of 3D Printed Dosage Forms: Opportunities and Challenges.

    Science.gov (United States)

    Alhnan, Mohamed A; Okwuosa, Tochukwu C; Sadia, Muzna; Wan, Ka-Wai; Ahmed, Waqar; Arafat, Basel

    2016-08-01

    The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such an extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry.

  15. Gamma scintigraphy in the evaluation of pharmaceutical dosage forms

    Energy Technology Data Exchange (ETDEWEB)

    Davis, S.S.; Hardy, J.G.; Newman, S.P.; Wilding, I.R. (Pharmaceutical Profiles Ltd., Nottingham (United Kingdom))

    1992-11-01

    Gamma-scintigraphy is applied extensively in the development and evaluation of pharmaceutical drug delivery systems. It is used particularly for monitoring formulations in the gastrointestinal and respiratory tracts. The radiolabelling is generally achieved by the incorporation of an appropriate technetium-99m or indium-111 labelled radiopharmaceutical into the formulation. In the case of complex dosage forms, such as enteric-coated tablets, labelling is best undertaken by the addition of a non-radioactive tracer such as samarium-152 or erbium-170 followed by neutron activation of the final product. Systems investigated include tablets and multiparticulates for oral administration, enemas and suppositories, metered dose inhalers and nebulisers, and nasal sprays and drops. Gamma-scintigraphy provides information on the deposition, dispersion and movement of the formulation. The combination of such studies with the assay of drug levels in blood or urine specimens, pharmacoscintigraphy, provides information concerning the sites of drug release and absorption. Data acquired from the scintigraphic evaluation of pharmaceutical dosage forms are now being used increasingly at all stages of product development, from the assessment of prototype delivery systems to supporting the product licence application. (orig.).

  16. ORODISPERSIBLE TABLET: A Patient Friendly Dosage Form (a Review

    Directory of Open Access Journals (Sweden)

    C. K. Rameesa

    2015-03-01

    Full Text Available Background: The most common and preferred route of drug administration is through the oral route. Orodispersible tablets are gaining importance among novel oral drug delivery system as they have improved patient compliance and have some additional advantages compared to other formulation. They are also solid unit dosage forms, which disintegrate in the mouth within a minute in the presence of saliva due to superdisintegrants in the formulation. Thus this type of drug delivery helps a proper per oral administration in pediatric and geriatric population where swallowing is a matter of trouble. Various scientists have prepared orodispersible tablets by following various methods. However, the most common method is the direct compression method. Other special methods are Freeze Drying,Tablet Molding, Sublimation, Spray Drying, Mass extrusion, Phase transition process, etc. Since these tablets dissolve directly in the mouth, so, their taste is also an important factor. Various approaches have been taken in order to mask the bitter taste of the drug. A number of scientists have explored several drugs in this field. Like all other solid dosage forms, they are also evaluated in the field of hardness, friability, wetting time, moisture uptake, disintegration test and dissolution test.

  17. 21 CFR 330.3 - Imprinting of solid oral dosage form drug products.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Imprinting of solid oral dosage form drug products... AS SAFE AND EFFECTIVE AND NOT MISBRANDED General Provisions § 330.3 Imprinting of solid oral dosage form drug products. A requirement to imprint an identification code on solid oral dosage form drug...

  18. 21 CFR 522.1696 - Penicillin G procaine implantation and injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin G procaine implantation and injectable dosage forms. 522.1696 Section 522.1696 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... DOSAGE FORM NEW ANIMAL DRUGS § 522.1696 Penicillin G procaine implantation and injectable dosage forms. ...

  19. 21 CFR 524.1662 - Oxytetracycline hydrochloride ophthalmic and topical dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline hydrochloride ophthalmic and topical dosage forms. 524.1662 Section 524.1662 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... DOSAGE FORM NEW ANIMAL DRUGS § 524.1662 Oxytetracycline hydrochloride ophthalmic and topical dosage forms. ...

  20. Oral Solid Dosage Form Disintegration Testing - The Forgotten Test.

    Science.gov (United States)

    Al-Gousous, Jozef; Langguth, Peter

    2015-09-01

    Since its inception in the 1930s, disintegration testing has become an important quality control (QC) test in pharmaceutical industry, and disintegration test procedures for various dosage forms have been described by the different pharmacopoeias, with harmonization among them still not quite complete. However, because of the fact that complete disintegration does not necessarily imply complete dissolution, much more research has been focused on dissolution rather than on disintegration testing. Nevertheless, owing to its simplicity, disintegration testing seems to be an attractive replacement to dissolution testing as recognized by the International Conference on Harmonization guidelines, in some cases. Therefore, with proper research being carried out to overcome the associated challenges, the full potential of disintegration testing could be tapped saving considerable efforts allocated to QC testing and quality assurance. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  1. Nanofibrous solid dosage form of living bacteria prepared by electrospinning

    Directory of Open Access Journals (Sweden)

    I. Wagner

    2014-05-01

    Full Text Available The aim of this work was to investigate the suitability of electrospinning for biodrug delivery and to develop an electrospinning-based method to produce vaginal drug delivery systems. Lactobacillus acidophilus bacteria were encapsulated into nanofibers of three different polymers (polyvinyl alcohol and polyvinylpyrrolidone with two different molar masses. Shelf life of the bacteria could be enhanced by the exclusion of water and by preparing a solid dosage form, which is an advantageous and patient-friendly way of administration. The formulations were stored at –20, 7 and 25°C, respectively. Viability testing showed that the nanofibers can provide long term stability for huge amounts of living bacteria if they are kept at (or below 7°C. Furthermore, all kinds of nanowebs prepared in this work dissolved instantly when they got in contact with water, thus the developed biohybrid nanowebs can provide new potential ways for curing bacterial vaginosis.

  2. Comprehensive review on additives of topical dosage forms for drug delivery.

    Science.gov (United States)

    Garg, Tarun; Rath, Goutam; Goyal, Amit K

    2015-12-01

    Skin is the largest organ of the human body and plays the most important role in protecting against pathogen and foreign matter. Three important modes such as topical, regional and transdermal are widely used for delivery of various dosage forms. Among these modes, the topical dosage forms are preferred because it provides local therapeutic activity when applied to the skin or mucous membranes. Additives or pharmaceutical excipients (non-drug component of dosage form) are used as inactive ingredients in dosage form or tools for structuring dosage forms. The main use of topical dosage form additives are controling the extent of absorption, maintaining the viscosity, improving the stability as well as organoleptic property and increasing the bulk of the formulation. The overall goal of this article is to provide the clinician with information related to the topical dosage form additives and their current major applications against various diseases.

  3. Biowaiver monographs for immediate release solid oral dosage forms: piroxicam.

    Science.gov (United States)

    Shohin, Igor E; Kulinich, Julia I; Ramenskaya, Galina V; Abrahamsson, Bertil; Kopp, Sabine; Langguth, Peter; Polli, James E; Shah, Vinod P; Groot, D W; Barends, Dirk M; Dressman, Jennifer B

    2014-02-01

    Literature and experimental data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing piroxicam in the free acid form are reviewed. Piroxicam solubility and permeability, its therapeutic use and therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA), and corresponding dissolution data are taken into consideration. The available data suggest that according to the current biopharmaceutics classification system (BCS) and all current guidances, piroxicam would be assigned to BCS Class II. The extent of piroxicam absorption seems not to depend on manufacturing conditions or excipients, so the risk of bioinequivalence in terms of area under the curve (AUC) is very low, but the rate of absorption (i.e., BE in terms of Cmax ) can be affected by the formulation. Current in vitro dissolution methods may not always reflect differences in terms of Cmax for BCS Class II weak acids; however, minor differences in absorption rate of piroxicam would not subject the patient to unacceptable risks: as piroxicam products may be taken before or after meals, the rate of absorption cannot be considered crucial to drug action. Therefore, a biowaiver for IR piroxicam solid oral dosage form is considered feasible, provided that (a) the test product contains only excipients, which are also present in IR solid oral drug products containing piroxicam, which have been approved in ICH or associated countries, for instance, those presented in Table 3 of this paper; (b) both the test and comparator drug products dissolve 85% in 30 min or less at pH 1.2, 4.5, and 6.8; and (c) the test product and comparator show dissolution profile similarity in pH 1.2, 4.5, and 6.8. When not all of these conditions can be fulfilled, BE of the products should be established in vivo. © 2013 Wiley Periodicals, Inc. and the

  4. Preactivated thiolated nanoparticles: A novel mucoadhesive dosage form.

    Science.gov (United States)

    Menzel, Claudia; Bonengel, Sonja; Pereira de Sousa, Irene; Laffleur, Flavia; Prüfert, Felix; Bernkop-Schnürch, Andreas

    2016-01-30

    Within this study a novel form of mucoadhesive nanoparticles (NPs) exhibiting a prolonged residence time on mucosal tissues was developed. In order to achieve this goal a new thiomer was synthesized by the covalent attachment of the amino acid l-cysteine ethyl ester to poly(acrylic acid) (100 kDa). The free thiol groups were in the following preactivated with the aromatic thiol bearing ligand 2-mercaptonicotinic acid (2-MNA) and the amount of coupled l-cysteine ethyl ester as well as the amount of attached 2-MNA was determined. Based on this, preactivated thiomer NPs were prepared by ionic gelation with polyethylenimine (PEI). The resulting NPs were characterized regarding size and zeta potential. Furthermore their mucoadhesive properties were investigated via rheological measurements with porcine intestinal mucus and via determination of the particles' mucosal residence time. Results showed that 1666.74 μmol l-cysteine ethyl ester and 603.07 μmol 2-MNA could be attached per gram polymer. NPs were in a size range of 112.67-252.84 nm exhibiting a zeta potential of -29 mV. Thiolated NPs only led to a 2-fold increase in mucus viscosity whereas preactivated NPs showed a 6-fold higher mucus viscosity than unmodified NPs. The mucosal residence time of thiolated NPs was 1.6-fold prolonged and that of preactivated NPs even 4.4-fold higher compared to unmodified particles. Accordingly, preactivated thiolated NPs providing a prolonged residence time on mucosal membranes could be a promising dosage form for various applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Influence of dosage form on the intravitreal pharmacokinetics of diclofenac.

    Science.gov (United States)

    Durairaj, Chandrasekar; Kim, Stephen J; Edelhauser, Henry F; Shah, Jaymin C; Kompella, Uday B

    2009-10-01

    To prepare a suspension form of diclofenac and compare the influence of the injected form (suspension versus solution) on the intravitreal pharmacokinetics of diclofenac in Dutch belted pigmented rabbits. Diclofenac acid was prepared and characterized in a suspension formulation. Rabbit eyes were injected with either diclofenac sodium solution (0.3 mg) or diclofenac acid suspension (10 mg) prepared in 0.1 mL balanced salt solution. Rabbits were killed at regular time intervals, the eyes enucleated, and drug content quantified in the vitreous humor and retina-choroid tissue by high-performance liquid chromatography. Pharmacokinetic models were developed for both the dosage forms, and simulations were performed for different doses. Diclofenac acid with an approximate 5-mum particle size exhibited 3.5-fold lower solubility in vitreous humor, when compared with its sodium salt. The estimated settling velocity of the suspension in the vitreous humor was 3 cm/h. After diclofenac sodium salt solution injection, drug levels declined rapidly with no drug levels detectable after 24 hours in the vitreous humor and 4 hours in the RC. Throughout the assessed time course, drug levels were higher in the vitreous. However, sustained, high drug levels were observed in both the vitreous humor and the retina-choroid even on day 21 after diclofenac acid suspension injection, with retina-choroid drug levels being higher beginning at 0.25 hour. The elimination half-life of diclofenac suspension was 24 and 18 days in vitreous and retina-choroid, respectively, compared to 2.9 and 0.9 hours observed with diclofenac sodium. The pharmacokinetic models developed indicated a slow-release distribution or depot compartment for the diclofenac acid suspension in the posterior segment. Simulations indicated the inability of a 10-mg dose of diclofenac sodium solution to sustain drug levels in the vitreous beyond 11 days. By choosing a less soluble form of a drug such as diclofenac acid, vitreous

  6. Mathematical modeling of drug release from lipid dosage forms.

    Science.gov (United States)

    Siepmann, J; Siepmann, F

    2011-10-10

    Lipid dosage forms provide an interesting potential for controlled drug delivery. In contrast to frequently used poly(ester) based devices for parenteral administration, they do not lead to acidification upon degradation and potential drug inactivation, especially in the case of protein drugs and other acid-labile active agents. The aim of this article is to give an overview on the current state of the art of mathematical modeling of drug release from this type of advanced drug delivery systems. Empirical and semi-empirical models are described as well as mechanistic theories, considering diffusional mass transport, potentially limited drug solubility and the leaching of other, water-soluble excipients into the surrounding bulk fluid. Various practical examples are given, including lipid microparticles, beads and implants, which can successfully be used to control the release of an incorporated drug during periods ranging from a few hours up to several years. The great benefit of mechanistic mathematical theories is the possibility to quantitatively predict the effects of different formulation parameters and device dimensions on the resulting drug release kinetics. Thus, in silico simulations can significantly speed up product optimization. This is particularly useful if long release periods (e.g., several months) are targeted, since experimental trial-and-error studies are highly time-consuming in these cases. In the future it would be highly desirable to combine mechanistic theories with the quantitative description of the drug fate in vivo, ideally including the pharmacodynamic efficacy of the treatments. Copyright © 2011 Elsevier B.V. All rights reserved.

  7. Carboxymethyl starch mucoadhesive microspheres as gastroretentive dosage form.

    Science.gov (United States)

    Lemieux, Marc; Gosselin, Patrick; Mateescu, Mircea Alexandru

    2015-12-30

    Carboxymethyl starch microspheres (CMS-MS) were produced from carboxymethyl starch powder (CMS-P) with a degree of substitution (DS) from 0.1 to 1.5 in order to investigate the influence of DS on physicochemical, drug release and mucoadhesion properties as well as interactions with gastrointestinal tract (GIT) epithelial barrier models. Placebo and furosemide loaded CMS-MS were obtained by emulsion-crosslinking with sodium trimetaphosphate (STMP). DS had an impact on increasing equilibrium water uptake and modulating drug release properties of the CMS-MS according to the surrounding pH. The transepithelial electrical resistance (TEER) of NCI-N87 gastric cell monolayers was not influenced in presence of CMS-MS, whereas that of Caco-2 intestinal cell monolayers decreased with increasing DS but recovered initial values at about 15h post-treatment. CMS-MS with increasing DS also enhanced furosemide permeability across both NCI-N87 and Caco-2 monolayers at pH gradients from 3.0 to 7.4. Mucoadhesion of CMS-MS on gastric mucosa (acidic condition) increased with the DS up to 55% for a DS of 1.0 but decreased on neutral intestinal mucosa to less than 10% with DS of 0.1. The drug release, permeability enhancement and mucoadhesive properties of the CMS-MS suggest CMS-MS with DS between 0.6 and 1.0 as suitable excipient for gastroretentive oral delivery dosage forms. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. A step toward development of printable dosage forms for poorly soluble drugs

    DEFF Research Database (Denmark)

    Raijada, Dharaben Kaushikkumar; Genina, Natalja; Fors, Daniela

    2013-01-01

    The purpose of this study was to formulate printable dosage forms for a poorly soluble drug (piroxicam; PRX) and to gain understanding of critical parameters to be considered during development of such dosage forms. Liquid formulations of PRX were printed on edible paper using piezoelectric inkjet...

  9. 21 CFR 522.1662 - Oxytetracycline hydrochloride implantation or injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline hydrochloride implantation or injectable dosage forms. 522.1662 Section 522.1662 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS § 522.1662 Oxytetracycline hydrochloride implantation or injectable...

  10. Ophthalmic Drug Dosage Forms: Characterisation and Research Methods

    OpenAIRE

    Baranowski, Przemysław; Karolewicz, Bożena; Gajda, Maciej; Pluta, Janusz

    2014-01-01

    This paper describes hitherto developed drug forms for topical ocular administration, that is, eye drops, ointments, in situ gels, inserts, multicompartment drug delivery systems, and ophthalmic drug forms with bioadhesive properties. Heretofore, many studies have demonstrated that new and more complex ophthalmic drug forms exhibit advantage over traditional ones and are able to increase the bioavailability of the active substance by, among others, reducing the susceptibility of drug forms to...

  11. 76 FR 81806 - Ophthalmic and Topical Dosage Form New Animal Drugs; Ivermectin Topical Solution

    Science.gov (United States)

    2011-12-29

    .... FDA-2011-N-0003] Ophthalmic and Topical Dosage Form New Animal Drugs; Ivermectin Topical Solution... solution of ivermectin. DATES: This rule is effective December 29, 2011. FOR FURTHER INFORMATION CONTACT... ANADA 200-318 for [[Page 81807

  12. Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Proguanil Hydrochloride.

    NARCIS (Netherlands)

    Plöger, Gerlinde F; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D I R K W; Langguth, Peter; Mehta, Mehul U; Parr, Alan; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Dressman, Jennifer B

    2018-01-01

    Literature data relevant to the decision to waive in vivo bioequivalence testing for the approval of generic immediate release solid oral dosage forms of proguanil hydrochloride are reviewed. To clarify the Biopharmaceutics Classification System (BCS) classification, experimental solubility and

  13. Miniaturized approach for excipient selection during the development of oral solid dosage form

    DEFF Research Database (Denmark)

    Raijada, Dharaben Kaushikkumar; Müllertz, Anette; Cornett, Claus

    2014-01-01

    The present study introduces a miniaturized high-throughput platform to understand the influence of excipients on the performance of oral solid dosage forms during early drug development. Wet massing of binary mixtures of the model drug (sodium naproxen) and representative excipients was followed...... for excipient selection and for early-stage performance testing of active pharmaceutical ingredient intended for oral solid dosage form. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:900-908, 2014....

  14. Ophthalmic Drug Dosage Forms: Characterisation and Research Methods

    Directory of Open Access Journals (Sweden)

    Przemysław Baranowski

    2014-01-01

    Full Text Available This paper describes hitherto developed drug forms for topical ocular administration, that is, eye drops, ointments, in situ gels, inserts, multicompartment drug delivery systems, and ophthalmic drug forms with bioadhesive properties. Heretofore, many studies have demonstrated that new and more complex ophthalmic drug forms exhibit advantage over traditional ones and are able to increase the bioavailability of the active substance by, among others, reducing the susceptibility of drug forms to defense mechanisms of the human eye, extending contact time of drug with the cornea, increasing the penetration through the complex anatomical structure of the eye, and providing controlled release of drugs into the eye tissues, which allows reducing the drug application frequency. The rest of the paper describes recommended in vitro and in vivo studies to be performed for various ophthalmic drugs forms in order to assess whether the form is acceptable from the perspective of desired properties and patient’s compliance.

  15. Determination of the mechanical properties of solid and cellular polymeric dosage forms by diametral compression.

    Science.gov (United States)

    Blaesi, Aron H; Saka, Nannaji

    2016-07-25

    At present, the immediate-release solid dosage forms, such as the oral tablets and capsules, are granular solids. They release drug rapidly and have adequate mechanical properties, but their manufacture is fraught with difficulties inherent in processing particulate matter. Such difficulties, however, could be overcome by liquid-based processing. Therefore, we have recently introduced polymeric cellular (i.e., highly porous) dosage forms prepared from a melt process. Experiments have shown that upon immersion in a dissolution medium, the cellular dosage forms with polyethylene glycol (PEG) as excipient and with predominantly open-cell topology disintegrate by exfoliation, thus enabling rapid drug release. If the volume fraction of voids of the open-cell structures is too large, however, their mechanical strength is adversely affected. At present, the common method for determining the tensile strength of brittle, solid dosage forms (such as select granular forms) is the diametral compression test. In this study, the theory of diametral compression is first refined to demonstrate that the relevant mechanical properties of ductile and cellular solids (i.e., the elastic modulus and the yield strength) can also be extracted from this test. Diametral compression experiments are then conducted on PEG-based solid and cellular dosage forms. It is found that the elastic modulus and yield strength of the open-cell structures are about an order of magnitude smaller than those of the non-porous solids, but still are substantially greater than the stiffness and strength requirements for handling the dosage forms manually. This work thus demonstrates that melt-processed polymeric cellular dosage forms that release drug rapidly can be designed and manufactured to have adequate mechanical properties. Copyright © 2016. Published by Elsevier B.V.

  16. Design and monitoring of photostability systems for amlodipine dosage forms.

    Science.gov (United States)

    Ragno, G; Cione, E; Garofalo, A; Genchi, G; Ioele, G; Risoli, A; Spagnoletta, A

    2003-10-20

    Photostability of amlodipine (AML) has been monitored in several pharmaceutical inclusion systems characterized by plurimolecular aggregation of the drug and excipients with high molecular weight. Several formulations including cyclodextrins, liposomes and microspheres have been prepared and characterized. The photodegradation process has been monitored according to the conditions suggested by the ICH Guideline for photostability testing, by using a light cabinet equipped with a Xenon lamp and monitored by spectrophotometry. The formulations herein tested have been found to be able to considerably increase drug stability, when compared with usual pharmaceutical forms. The residual concentration detected in the inclusion complexes with cyclodextrins and liposomes was 90 and 77%, respectively, while a very good value of 97% was found for microspheres, after a radiant exposure of 11,340 kJm(-2).

  17. Semi-solid dosage form of clonazepam for rapid oral mucosal absorption.

    Science.gov (United States)

    Sakata, Osamu; Machida, Yoshiharu; Onishi, Hiraku

    2011-07-01

    In order to obtain an alternative to the intravenous (i.v.) dosage form of clonazepam (CZ), an oral droplet formulation of CZ was developed previously; however, the droplet was physically unstable. Therefore, in the present study, it was attempted to develop an easily-handled dosage form, which was more physically stable and allowed rapid drug absorption from oral mucosa. A semi-solid dosage form, composed of polyethylene glycol 1500 (PEG), CZ, and oleic acid (OA) at 37/1/2 (w/w) and named PEG/CZ/OA, and a semi-solid dosage form containing PEG and CZ at 39/1 (w/w), called PEG/CZ, were prepared. Their physical stability in air at room temperature and oral mucosal absorption in rats were investigated. The semi-solid dosage forms were much more stable physically than the droplet, that is, no recrystallization of CZ was observed for at least 8 days. The effective concentration for humans and rats (20 ng/mL or more) was achieved within 30 min after buccal administration for both PEG/CZ/OA and PEG/CZ. The plasma concentration increased gradually and less varied at each time point for PEG/CZ/OA. PEG/CZ/OA was found to show more rapid and higher absorption of CZ in buccal administration than in sublingual administration. Buccal administration with the semi-solid dosage PEG/CZ with or without OA was suggested to be a possibly useful novel dosage form as an alternative to i.v. injection.

  18. Spectroscopic determination of succinylcholine in dosage forms using eosin Y.

    Science.gov (United States)

    Ayad, Magda M; Belal, Fathalla; Hosney, Mervet M; Abo El Abass, Samah; Elsayed, Nora

    2018-03-01

    Two simple and sensitive analytical assay methods using spectrophotometry and spectrofluorimetry techniques were developed for the estimation of succinylcholine chloride (SUC) in pharmaceutical preparations. The suggested methods are based on the formation of an ion pair complex formed between the drug and eosin Y spectrophotometrically (Method I), or the suppressive effect of succinylcholine on the native fluorescence property of eosin Y (Method II). The spectrophotometric method (Method I) involves measuring the absorbance of the complex between succinylcholine and eosin Y at 550 nm in Britton Robinson buffer of pH 3. However, the spectrofluorimetric method (Method II) involves measuring the quenching effect of the studied drug on the native fluorescence property of eosin Y at the same pH at 550 nm after excitation at 480 nm. The absorbance versus concentration of the drug is rectilinear over the range of 0.5 to 15 μg/ml. The formation constant was 3.5 × 10 4 and the Gibb's free energy change was -2.5 × 10 4  J/mol. In Method II, the relative fluorescence intensity was directly proportional to SUC concentration over the range of 0.05 to 1 μg/ml. The proposed methods allowed a successful application to the estimation of succinylcholine ampoules. An explanation of the reaction pathway was postulated. Copyright © 2017 John Wiley & Sons, Ltd.

  19. HPLC FOR CONTROL STABILITY OF QUERCETIN INJECTABLE DOSAGE FORM

    Directory of Open Access Journals (Sweden)

    Martynov AV

    2016-12-01

    Full Text Available Introduction. Quercetin is a flavone derivatives which known like a substances with vitamin activity, high antioxidant, antimutagenic and anticarcinogenic activity and many other types of biological activity. Wide usage of quercetin prevents their polyphenolic nature structure which does not allow a high bioavailability of pure quercetin when administered orally. This is associated with a wide spectrum variety of chemical reactions for the phenolic groups: from interaction with amino acid residues in proteins to reactions with amine heterocyclic alkaloids and polysaccharides. In our days Corvitin – one from the number of quercetin based drugs with sufficiently low levels all types toxicity, allergenic and has no irritating action on intravenous administration. In the same time quercetin cannot be used in full measure because of the limited number of publications with analysis methods, especially HPLC. Determining the stability over time of concentrate quercetin solution, as well as determining the stability of the concentrate to the original autoclave sterilization conditions is a promising direction in creating new drugs. Materials and methods The objective was to research quercetin soluble formulation samples in different conditions: 1 fresh dilute concentrate (0.9% sodium chloride; 2 the original dilute concentrate, which was stored at room temperature for 14 days in light and 3 similar to the first sample dilute concentrate, which went before breeding in autoclaving at 120 0 C for 20 minutes. The objects used in the studies were industrial drug-substance quercetin (Sinkea manufactured (China, the original pharmaceutical composition as the soluble form of quercetin for injection and aerosol applications, glycerol (Sigma, Polysorbat 80 (Merk, ethanol 96 %. For the HPLC – analysis, chromatograph "Milichrom A-02" (SiChrom, Knauer (Econova, Novosibirsk, Russia was used. Results and discussion Quercetin was identified using information on its

  20. Effects of pharmaceutical processing on pepsin activity during the formulation of solid dosage forms.

    Science.gov (United States)

    Kristó, Katalin; Pintye-Hódi, Klára

    2013-02-01

    The main aim of this study was to investigate the effects of pharmaceutical technological methods on pepsin activity during the formulation of solid dosage forms. The circumstances of direct compression and wet granulation were modeled. During direct compression, the heat and the compression force must be taken into consideration. The effects of these parameters were investigated in three materials (pure pepsin, and 1:1 (w/w) pepsin-tartaric acid and 1:1 (w/w) pepsin-citric acid powder mixtures). It was concluded that direct compression is appropriate for the formulation of solid dosage forms containing pepsin through application without acids or with acids at low compression force. The effects of wet granulation were investigated with a factorial design for the same three materials. The factors were time, temperature and moisture content. There was no significant effect of the factors when acids were not applied. Temperature was a significant factor when acids were applied. The negative effect was significantly higher for citric acid than for tartaric acid. It was found that wet granulation can be utilized for the processing of pepsin into solid dosage forms under well-controlled circumstances. The application of citric acid is not recommended during the formulation of solid dosage forms through wet granulation. A mathematically based optimization may be necessary for preformulation studies of the preparation of dosage forms containing sensitive enzymes.

  1. Effect of Calcium Ions on the Disintegration of Enteric-Coated Solid Dosage Forms.

    Science.gov (United States)

    Al-Gousous, Jozef; Langguth, Peter

    2016-02-01

    To investigate the effect of calcium ions on the disintegration of enteric-coated dosage forms, disintegration testing was performed on enteric-coated aspirin tablets in the presence and absence of calcium in the test media. The results show that the presence of calcium ions retards the disintegration of enteric-coated dosage forms. This finding, which has not been reported in scientific literature, sheds light on the importance of conducting well-designed detailed investigations into the potential of calcium from dietary sources, calcium supplements, antacids, and/or phosphate binders affecting the absorption of drugs formulated into enteric-coated dosage forms. Moreover, it shows the necessity to investigate the potential of the occurrence of additional nutrient-excipient interactions. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  2. On the exfoliating polymeric cellular dosage forms for immediate drug release.

    Science.gov (United States)

    Blaesi, Aron H; Saka, Nannaji

    2016-06-01

    The most prevalent pharmaceutical dosage forms at present-the oral immediate-release tablets and capsules-are granular solids. Though effective in releasing drug rapidly, development and manufacture of such dosage forms are fraught with difficulties inherent to particulate processing. Predictable dosage form manufacture could be achieved by liquid-based processing, but cast solid dosage forms are not suitable for immediate drug release due to their resistance to fluid percolation. To overcome this limitation, we have recently introduced cellular dosage forms that can be readily prepared from polymeric melts. It has been shown that open-cell structures comprising polyethylene glycol 8000 (PEG 8k) excipient and a drug exfoliate upon immersion in a dissolution medium. The drug is then released rapidly due to the large specific surface area of the exfoliations. In this work, we vary the molecular weight of the PEG excipient and investigate its effect on the drug release kinetics of structures with predominantly open-cell topology. We demonstrate that the exfoliation rate decreases substantially if the excipient molecular weight is increased from 12 to 100kg/mol, which causes the drug dissolution time to increase by more than a factor of ten. A model is then developed to elucidate the exfoliation behavior of cellular structures. Diverse transport processes are considered: percolation due to capillarity, diffusion of dissolution medium through the cell walls, and viscous flow of the saturated excipient. It is found that the lower exfoliation rate and the longer dissolution time of the dosage forms with higher excipient molecular weight are primarily due to the greater viscosity of the cell walls after fluid penetration. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Derivative spectrophotometric method for simultaneous determination of clindamycin phosphate and tretinoin in pharmaceutical dosage forms.

    Science.gov (United States)

    Barazandeh Tehrani, Maliheh; Namadchian, Melika; Fadaye Vatan, Sedigheh; Souri, Effat

    2013-04-10

    A derivative spectrophotometric method was proposed for the simultaneous determination of clindamycin and tretinoin in pharmaceutical dosage forms. The measurement was achieved using the first and second derivative signals of clindamycin at (1D) 251 nm and (2D) 239 nm and tretinoin at (1D) 364 nm and (2D) 387 nm.The proposed method showed excellent linearity at both first and second derivative order in the range of 60-1200 and 1.25-25 μg/ml for clindamycin phosphate and tretinoin respectively. The within-day and between-day precision and accuracy was in acceptable range (CVpharmaceutical dosage form.

  4. Accelerated in-vitro release testing methods for extended-release parenteral dosage forms.

    Science.gov (United States)

    Shen, Jie; Burgess, Diane J

    2012-07-01

    This review highlights current methods and strategies for accelerated in-vitro drug release testing of extended-release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in-situ depot-forming systems and implants. Extended-release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, 'real-time' in-vitro release tests for these dosage forms are often run over a long time period. Accelerated in-vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in-vitro release methods using United States Pharmacopeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended-release parenteral dosage forms, along with the accelerated in-vitro release testing methods currently employed are discussed. Accelerated in-vitro release testing methods with good discriminatory ability are critical for quality control of extended-release parenteral products. Methods that can be used in the development of in-vitro-in-vivo correlation (IVIVC) are desirable; however, for complex parenteral products this may not always be achievable. © 2012 The Authors. JPP © 2012 Royal Pharmaceutical Society.

  5. Accelerated in vitro release testing methods for extended release parenteral dosage forms

    Science.gov (United States)

    Shen, Jie; Burgess, Diane J.

    2012-01-01

    Objectives This review highlights current methods and strategies for accelerated in vitro drug release testing of extended release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in situ depot-forming systems, and implants. Key findings Extended release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, “real-time” in vitro release tests for these dosage forms are often run over a long time period. Accelerated in vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in vitro release methods using United States Pharmacopoeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended release parenteral dosage forms, along with the accelerated in vitro release testing methods currently employed are discussed. Conclusions Accelerated in vitro release testing methods with good discriminatory ability are critical for quality control of extended release parenteral products. Methods that can be used in the development of in vitro-in vivo correlation (IVIVC) are desirable, however for complex parenteral products this may not always be achievable. PMID:22686344

  6. Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms

    Directory of Open Access Journals (Sweden)

    Evert Fuenmayor

    2018-04-01

    Full Text Available Material choice is a fundamental consideration when it comes to designing a solid dosage form. The matrix material will ultimately determine the rate of drug release since the physical properties (solubility, viscosity, and more of the material control both fluid ingress and disintegration of the dosage form. The bulk properties (powder flow, concentration, and more of the material should also be considered since these properties will influence the ability of the material to be successfully manufactured. Furthermore, there is a limited number of approved materials for the production of solid dosage forms. The present study details the complications that can arise when adopting pharmaceutical grade polymers for fused-filament fabrication in the production of oral tablets. The paper also presents ways to overcome each issue. Fused-filament fabrication is a hot-melt extrusion-based 3D printing process. The paper describes the problems encountered in fused-filament fabrication with Kollidon® VA64, which is a material that has previously been utilized in direct compression and hot-melt extrusion processes. Formulation and melt-blending strategies were employed to increase the printability of the material. The paper defines for the first time the essential parameter profile required for successful 3D printing and lists several pre-screening tools that should be employed to guide future material formulation for the fused-filament fabrication of solid dosage forms.

  7. 75 FR 26647 - Ophthalmic and Topical Dosage Form New Animal Drugs; Ivermectin Topical Solution

    Science.gov (United States)

    2010-05-12

    .... FDA-2010-N-0002] Ophthalmic and Topical Dosage Form New Animal Drugs; Ivermectin Topical Solution... are treated with a topical solution of ivermectin. DATES: This rule is effective May 12, 2010. FOR... ANADA 200-340 for PRIVERMECTIN (ivermectin), a topical solution used on cattle to control infestations...

  8. Biowaiver monograph for immediate-release solid oral dosage forms: bisoprolol fumarate.

    Science.gov (United States)

    Charoo, Naseem A; Shamsher, Areeg A A; Lian, Lai Y; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

    2014-02-01

    Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing bisoprolol as the sole active pharmaceutical ingredient (API) are reviewed. Bisoprolol is classified as a Class I API according to the current Biopharmaceutics Classification System (BCS). In addition to the BCS class, its therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability problems are taken into consideration. Qualitative compositions of IR tablet dosage forms of bisoprolol with a marketing authorization (MA) in ICH (International Conference on Harmonisation) countries are tabulated. It was inferred that these tablets had been demonstrated to be bioequivalent to the innovator product. No reports of failure to meet BE standards have been made in the open literature. On the basis of all these pieces of evidence, a biowaiver can currently be recommended for bisoprolol fumarate IR dosage forms if (1) the test product contains only excipients that are well known, and used in normal amounts, for example, those tabulated for products with MA in ICH countries and (2) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving with similarity of the dissolution profiles demonstrated at pH 1.2, 4.5, and 6.8. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

  9. 76 FR 22610 - Implantation or Injectable Dosage Form New Animal Drugs; Enrofloxacin

    Science.gov (United States)

    2011-04-22

    .... FDA-2011-N-0003] Implantation or Injectable Dosage Form New Animal Drugs; Enrofloxacin AGENCY: Food... the indications for use of enrofloxacin solution in cattle, as a single injection, for the treatment... supplement to NADA 141-068 for BAYTRIL 100 (enrofloxacin), an injectable solution. The supplemental NADA...

  10. 78 FR 30197 - Oral Dosage Form New Animal Drugs; Clindamycin; Enrofloxacin

    Science.gov (United States)

    2013-05-22

    ...-0002] Oral Dosage Form New Animal Drugs; Clindamycin; Enrofloxacin AGENCY: Food and Drug Administration...- Tallaght, Dublin Oral Drops. 940. 24, Ireland. 200-551........ Putney, Inc., 400 Enrofloxacin Original....812 Enrofloxacin. (a) Specifications. Each tablet contains 22.7, 68.0, or 136.0 milligrams (mg) of...

  11. Rheology as a tool for evaluation of melt processability of innovative dosage forms

    DEFF Research Database (Denmark)

    Aho, Johanna Maaria; Boetker, Johan P; Baldursdottir, Stefania

    2015-01-01

    ) printing, will have an increasingly important role when designing products for flexible dosing, since dosage forms based on compacting of a given powder mixture do not enable manufacturing of optimal pharmaceutical products for personalized treatments. The melt processability of polymers and API...

  12. Study of hydrogels based on polyacrilamide as new controlled release dosage forms produced by frontal polymerization

    OpenAIRE

    Sechi, Rossana; Gavini, Elisabetta; Mariani, Alberto; Bidali, Simone; Bonferoni, Maria Cristina; Sanna, Vanna Annunziata; Rassu, Giovanna; Pirisino, Gerolamo Antonio; Giunchedi, Paolo

    2006-01-01

    The work purpose was the evaluation of the potential application of the Frontal Polymerization (FP) technique as a new method for the preparation of controlled release dosage forms based on polyacrilamide, in which the drug loading and the polymer preparation occur at the same time.

  13. 76 FR 3488 - Implantation or Injectable Dosage Form New Animal Drugs; Oxytetracycline and Flunixin

    Science.gov (United States)

    2011-01-20

    .... FDA-2010-N-0002] Implantation or Injectable Dosage Form New Animal Drugs; Oxytetracycline and Flunixin... combination drug injectable solution containing oxytetracycline and flunixin meglumine in cattle. [[Page 3489... veterinary prescription use of HEXASOL (oxytetracycline and flunixin meglumine) Injection for the treatment...

  14. 3D printing of high drug loaded dosage forms using thermoplastic polyurethanes.

    Science.gov (United States)

    Verstraete, G; Samaro, A; Grymonpré, W; Vanhoorne, V; Van Snick, B; Boone, M N; Hellemans, T; Van Hoorebeke, L; Remon, J P; Vervaet, C

    2018-01-30

    It was the aim of this study to develop high drug loaded (>30%, w/w), thermoplastic polyurethane (TPU)-based dosage forms via fused deposition modelling (FDM). Model drugs with different particle size and aqueous solubility were pre-processed in combination with diverse TPU grades via hot melt extrusion (HME) into filaments with a diameter of 1.75 ± 0.05 mm. Subsequently, TPU-based filaments which featured acceptable quality attributes (i.e. consistent filament diameter, smooth surface morphology and good mechanical properties) were printed into tablets. The sustained release potential of the 3D printed dosage forms was tested in vitro. Moreover, the impact of printing parameters on the in vitro drug release was investigated. TPU-based filaments could be loaded with 60% (w/w) fine drug powder without observing severe shark skinning or inconsistent filament diameter. During 3D printing experiments, HME filaments based on hard TPU grades were successfully converted into personalized dosage forms containing a high concentration of crystalline drug (up to 60%, w/w). In vitro release kinetics were mainly affected by the matrix composition and tablet infill degree. Therefore, this study clearly demonstrated that TPU-based FDM feedstock material offers a lot of formulation freedom for the development of personalized dosage forms. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. 75 FR 21162 - Certain Other Dosage Form New Animal Drugs; Detomidine

    Science.gov (United States)

    2010-04-23

    .... FDA-2010-N-0002] Certain Other Dosage Form New Animal Drugs; Detomidine AGENCY: Food and Drug... NADA provides for veterinary prescription use of detomidine hydrochloride oromucosal gel for sedation... prescription use of DORMOSEDAN GEL (detomidine hydrochloride) for sedation and restraint of horses. The...

  16. 76 FR 16533 - Certain Other Dosage Form New Animal Drugs; Detomidine; Correction

    Science.gov (United States)

    2011-03-24

    .... FDA-2010-N-0002] Certain Other Dosage Form New Animal Drugs; Detomidine; Correction AGENCY: Food and... paragraph describing limitations to the approved conditions of use for detomidine hydrochloride oromucosal... conditions of use for detomidine hydrochloride oromucosal gel in horses. This correction is being made to...

  17. Dropwise additive manufacturing of pharmaceutical products for solvent-based dosage forms.

    Science.gov (United States)

    Hirshfield, Laura; Giridhar, Arun; Taylor, Lynne S; Harris, Michael T; Reklaitis, Gintaras V

    2014-02-01

    In recent years, the US Food and Drug Administration has encouraged pharmaceutical companies to develop more innovative and efficient manufacturing methods with improved online monitoring and control. Mini-manufacturing of medicine is one such method enabling the creation of individualized product forms for each patient. This work presents dropwise additive manufacturing of pharmaceutical products (DAMPP), an automated, controlled mini-manufacturing method that deposits active pharmaceutical ingredients (APIs) directly onto edible substrates using drop-on-demand (DoD) inkjet printing technology. The use of DoD technology allows for precise control over the material properties, drug solid state form, drop size, and drop dynamics and can be beneficial in the creation of high-potency drug forms, combination drugs with multiple APIs or individualized medicine products tailored to a specific patient. In this work, DAMPP was used to create dosage forms from solvent-based formulations consisting of API, polymer, and solvent carrier. The forms were then analyzed to determine the reproducibility of creating an on-target dosage form, the morphology of the API of the final form and the dissolution behavior of the drug over time. DAMPP is found to be a viable alternative to traditional mass-manufacturing methods for solvent-based oral dosage forms. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

  18. Biowaiver monograph for immediate-release solid oral dosage forms: fluconazole.

    Science.gov (United States)

    Charoo, Naseem; Cristofoletti, Rodrigo; Graham, Alexandra; Lartey, Paul; Abrahamsson, Bertil; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

    2014-12-01

    Literature data pertaining to the decision to allow a waiver of in vivo bioequivalence (BE) testing requirements for the approval of immediate release (IR) solid oral dosage forms containing fluconazole as the only active pharmaceutical ingredient (API) are reviewed. The decision is based on solubility, dissolution, permeability, therapeutic index, pharmacokinetic parameters, pharmacodynamic properties, and other relevant data. BE/bioavailability (BA) problems and drug-excipients interaction data were also reviewed and taken into consideration. According to the biopharmaceutics classification system (BCS), fluconazole in polymorphic forms II and III is a BCS class I drug and has a wide therapeutic index. BE of test formulations from many different manufacturers containing different excipients confirmed that the risk of bioinequivalence because of formulation and manufacturing factors is low. It was inferred that risk can be further reduced if in vitro studies are performed according to biowaiver guidelines. Thus, it is concluded that a biowaiver can be recommended for fluconazole IR dosage forms if (a) fluconazole is present as polymorphic form II or III or any other form/mixture showing high solubility, (b) the selection of excipients be limited to those found in IR drug products approved in International Conference on Harmonisation (ICH) countries for the same dosage form and used in their usual amounts, and (c) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving throughout the shelf life with similar dissolution profiles at pH 1.2, 4.5, and 6.8. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  19. Artificial Neural Networks in Evaluation and Optimization of Modified Release Solid Dosage Forms

    Directory of Open Access Journals (Sweden)

    Zorica Djurić

    2012-10-01

    Full Text Available Implementation of the Quality by Design (QbD approach in pharmaceutical development has compelled researchers in the pharmaceutical industry to employ Design of Experiments (DoE as a statistical tool, in product development. Among all DoE techniques, response surface methodology (RSM is the one most frequently used. Progress of computer science has had an impact on pharmaceutical development as well. Simultaneous with the implementation of statistical methods, machine learning tools took an important place in drug formulation. Twenty years ago, the first papers describing application of artificial neural networks in optimization of modified release products appeared. Since then, a lot of work has been done towards implementation of new techniques, especially Artificial Neural Networks (ANN in modeling of production, drug release and drug stability of modified release solid dosage forms. The aim of this paper is to review artificial neural networks in evaluation and optimization of modified release solid dosage forms.

  20. A Validated RP-HPLC Method for the Determination of Atazanavir in Pharmaceutical Dosage Form

    Directory of Open Access Journals (Sweden)

    K. Srinivasu

    2011-01-01

    Full Text Available A validated RP HPLC method for the estimation of atazanavir in capsule dosage form on YMC ODS 150 × 4.6 mm, 5 μ column using mobile phase composition of ammonium dihydrogen phosphate buffer (pH 2.5 with acetonitrile (55:45 v/v. Flow rate was maintained at 1.5 mL/min with 288 nm UV detection. The retention time obtained for atazanavir was at 4.7 min. The detector response was linear in the concentration range of 30 - 600 μg/mL. This method has been validated and shown to be specific, sensitive, precise, linear, accurate, rugged, robust and fast. Hence, this method can be applied for routine quality control of atazanavir in capsule dosage forms as well as in bulk drug.

  1. Semi-Solid and Solid Dosage Forms for the Delivery of Phage Therapy to Epithelia

    Science.gov (United States)

    Petrovski, Steve; Chan, Hiu Tat; Angove, Michael J.; Tucci, Joseph

    2018-01-01

    The delivery of phages to epithelial surfaces for therapeutic outcomes is a realistic proposal, and indeed one which is being currently tested in clinical trials. This paper reviews some of the known research on formulation of phages into semi-solid dosage forms such as creams, ointments and pastes, as well as solid dosage forms such as troches (or lozenges and pastilles) and suppositories/pessaries, for delivery to the epithelia. The efficacy and stability of these phage formulations is discussed, with a focus on selection of optimal semi-solid bases for phage delivery. Issues such as the need for standardisation of techniques for formulation as well as for assessment of efficacy are highlighted. These are important when trying to compare results from a range of experiments and across different delivery bases. PMID:29495355

  2. Particle Engineering Via Mechanical Dry Coating in the Design of Pharmaceutical Solid Dosage Forms.

    Science.gov (United States)

    Qu, Li; Morton, David A V; Zhou, Qi Tony

    2015-01-01

    Cohesive powders are problematic in the manufacturing of pharmaceutical solid dosage forms because they exhibit poor flowability, fluidization and aerosolization. These undesirable bulk properties of cohesive powders represent a fundamental challenge in the design of efficient pharmaceutical manufacturing processes. Recently, mechanical dry coating has attracted increasing attention as it can improve the bulk properties of cohesive powders in a cheaper, simpler, safer and more environment-friendly way than the existing solvent-based counterparts. In this review, mechanical dry coating techniques are outlined and their potential applications in formulation and manufacturing of pharmaceutical solid dosage forms are discussed. Reported data from the literature have shown that mechanical dry coating holds promise for the design of superior pharmaceutical solid formulations or manufacturing processes by engineering the interfaces of cohesive powders in an efficient and economical way.

  3. Development and characterization of a gastroretentive dosage form composed of chitosan and hydroxyethyl cellulose for alendronate

    OpenAIRE

    Chen YC; Ho HO; Chiu CC; Sheu MT

    2013-01-01

    Ying-Chen Chen,1,* Hsiu-O Ho,1,* Chiao-Chi Chiu,1 Ming-Thau Sheu1,2 1School of Pharmacy, College of Pharmacy, Taipei Medical University, 2Clinical Research Center and Traditional Herbal Medicine Research Center, Taipei Medical University Hospital, Taipei, Taiwan*These authors contributed equally to this workAbstract: In this study, alendronate, the most commonly used biphosphonate for treating osteoporosis, was formulated as gastroretentive dosage form (GRDF) tablets to enhance its oral bioav...

  4. ANALYTICAL STUDY OF CURCUMIN CONTENT IN DIFFERENT DOSAGE FORMS CONTAINING TURMERIC EXTRACT POWDER AND TURMERIC OLEORESIN

    OpenAIRE

    Rane Rajashree; Gangolli Divya; Patil Sushma; Ingawale Kanchan; Kundalwal Sachin

    2013-01-01

    Different dosage forms namely tablets, capsules, creams and syrups were analysed for curcumin content, by the well-known spectrophotometric method. Turmeric extract powder was used as a source of curcumin in capsule and tablet formulations. Turmeric oleoresin was used as a source of curcumin in cream formulation. Additionally, syrup formulations containing turmeric extract powder as well as turmeric oleoresin, separately, were also tested for their curcumin contents. Analytical results for cu...

  5. Preparation and evaluation of doxycycline hydrochloride and bromhexine hydrochloride dosage forms for pigeons / Marga le Roux

    OpenAIRE

    Le Roux, Marga

    2004-01-01

    Objective: To prepare and evaluate three different dosage forms, containing doxycycline hydrochloride (HCI) and bromhexine hydrochloride (HCI) respectively and in combination, for the treatment of respiratory diseases in pigeons. Background: Birds have held a place in man's affection since the ancient Egyptians and Romans kept birds. Europeans have successfully bred birds, especially smaller birds and pigeons, for centuries. Only in recent years, however, have science and me...

  6. Influence of Postprandial Intragastric Pressures on Drug Release from Gastroretentive Dosage Forms.

    Science.gov (United States)

    Schneider, Felix; Hoppe, Melanie; Koziolek, Mirko; Weitschies, Werner

    2018-05-29

    Despite extensive research in the field of gastroretentive dosage forms, this "holy grail" of oral drug delivery yet remained an unmet goal. Especially under fasting conditions, the reproducible retention of dosage forms in the stomach seems to be an impossible task. This is why such systems are often advised to be taken together with food. But also the postprandial motility can contribute significantly to the failure of gastroretentive dosage forms. To investigate the influence of postprandial pressure conditions on drug release from such systems, we used a novel in vitro dissolution tool, the dissolution stress test device. With the aid of this device, we simulated three different intragastric pressure profiles that may occur after postprandial intake. These transit scenarios were based on recently obtained, postprandial SmartPill® data. The tested systems, Glumetza® 1000 and Madopar® HBS 125, are marketed dosage forms that are based on different approaches to achieve proper gastric retention. All three transit scenarios revealed a highly pressure-sensitive drug release behavior, for both drugs. For Madopar® HBS 125, nearly complete drug release was observed even after early occurring pressures. Glumetza® 1000 seemed to be more resistant to these, most likely due to incomplete wetting of the system. On the contrary to these findings, data from standard dissolution tests using the paddle apparatus displayed controlled drug release for both systems for about 6 h. Based on these results, it can be doubted that established gastroretentive systems stay intact over a longer period of time, even under postprandial conditions.

  7. Spectrophotometric simultaneous determination of Rabeprazole Sodium and Itopride Hydrochloride in capsule dosage form

    Science.gov (United States)

    Sabnis, Shweta S.; Dhavale, Nilesh D.; Jadhav, Vijay. Y.; Gandhi, Santosh V.

    2008-03-01

    A new simple, economical, rapid, precise and accurate method for simultaneous determination of rabeprazole sodium and itopride hydrochloride in capsule dosage form has been developed. The method is based on ratio spectra derivative spectrophotometry. The amplitudes in the first derivative of the corresponding ratio spectra at 231 nm (minima) and 260 nm were selected to determine rabeprazole sodium and itopride hydrochloride, respectively. The method was validated with respect to linearity, precision and accuracy.

  8. New applications to computerized tomography: analysis of solid dosage forms produced by pharmaceutical industry

    International Nuclear Information System (INIS)

    Oliveira Junior, Jose Martins de; Martins, Antonio Cesar Germano

    2009-01-01

    Full text: In recent years, computerized tomography (CT) has been used as a new probe to study solid dosage forms (tablets) produced by pharmaceutical industry. This new approach to study tablet and powder, or granulation, properties used in pharmaceutical industry is very suitable. First because CT can generate information that traditional technologies used in this kind of analysis can not, such as, density distribution of internal structures and tablet dimensions, pore size distribution, particle shape information, and also investigation of official and unofficial (counterfeit) copies of solid dosage forms. Second because CT is a nondestructive technique, allowing the use of tablets or granules in others analysis. In this work we discus how CT can be used to acquire and reconstruct internal microstructure of tablets and granules. CT is a technique that is based on attenuation of X-rays passing through matter. Attenuation depends on the density and atomic number of the material that is scanned. In this work, a micro-CT X-ray scanner (manufactured by the group of Applied Nuclear Physics at University of Sorocaba) was used to obtain three-dimensional images of the tablets and granules for nondestructive analysis. These images showed a non uniform density distribution of material inside some tablets, the morphology of some granules analyzed, the integrity of the liquid-filled soft-gelatin capsule and so on. It could also be observed that the distribution of different constituents presents an osmotic controlled-release dosage form. The present work shows that it is possible to use X-ray microtomography to obtain useful qualitative and quantitative information on the structure of pharmaceutical dosage forms. (author)

  9. Materials for Pharmaceutical Dosage Forms: Molecular Pharmaceutics and Controlled Release Drug Delivery Aspects

    Directory of Open Access Journals (Sweden)

    Patrick P. DeLuca

    2010-09-01

    Full Text Available Controlled release delivery is available for many routes of administration and offers many advantages (as microparticles and nanoparticles over immediate release delivery. These advantages include reduced dosing frequency, better therapeutic control, fewer side effects, and, consequently, these dosage forms are well accepted by patients. Advances in polymer material science, particle engineering design, manufacture, and nanotechnology have led the way to the introduction of several marketed controlled release products and several more are in pre-clinical and clinical development.

  10. Discrete element method (DEM) simulations of stratified sampling during solid dosage form manufacturing.

    Science.gov (United States)

    Hancock, Bruno C; Ketterhagen, William R

    2011-10-14

    Discrete element model (DEM) simulations of the discharge of powders from hoppers under gravity were analyzed to provide estimates of dosage form content uniformity during the manufacture of solid dosage forms (tablets and capsules). For a system that exhibits moderate segregation the effects of sample size, number, and location within the batch were determined. The various sampling approaches were compared to current best-practices for sampling described in the Product Quality Research Institute (PQRI) Blend Uniformity Working Group (BUWG) guidelines. Sampling uniformly across the discharge process gave the most accurate results with respect to identifying segregation trends. Sigmoidal sampling (as recommended in the PQRI BUWG guidelines) tended to overestimate potential segregation issues, whereas truncated sampling (common in industrial practice) tended to underestimate them. The size of the sample had a major effect on the absolute potency RSD. The number of sampling locations (10 vs. 20) had very little effect on the trends in the data, and the number of samples analyzed at each location (1 vs. 3 vs. 7) had only a small effect for the sampling conditions examined. The results of this work provide greater understanding of the effect of different sampling approaches on the measured content uniformity of real dosage forms, and can help to guide the choice of appropriate sampling protocols. Copyright © 2011 Elsevier B.V. All rights reserved.

  11. Applications of Polymers as Pharmaceutical Excipients in Solid Oral Dosage Forms.

    Science.gov (United States)

    Debotton, Nir; Dahan, Arik

    2017-01-01

    Over the last few decades, polymers have been extensively used as pharmaceutical excipients in drug delivery systems. Pharmaceutical polymers evolved from being simply used as gelatin shells comprising capsule to offering great formulation advantages including enabling controlled/slow release and specific targeting of drugs to the site(s) of action (the "magic bullets" concept), hence hold a significant clinical promise. Oral administration of solid dosage forms (e.g., tablets and capsules) is the most common and convenient route of drug administration. When formulating challenging molecules into solid oral dosage forms, polymeric pharmaceutical excipients permit masking undesired physicochemical properties of drugs and consequently, altering their pharmacokinetic profiles to improve the therapeutic effect. As a result, the number of synthetic and natural polymers available commercially as pharmaceutical excipients has increased dramatically, offering potential solutions to various difficulties. For instance, the different polymers may allow increased solubility, swellability, viscosity, biodegradability, advanced coatings, pH dependency, mucodhesion, and inhibition of crystallization. The aim of this article is to provide a wide angle prospect of the different uses of pharmaceutical polymers in solid oral dosage forms. The various types of polymeric excipients are presented, and their distinctive role in oral drug delivery is emphasized. The comprehensive know-how provided in this article may allow scientists to use these polymeric excipients rationally, to fully exploit their different features and potential influence on drug delivery, with the overall aim of making better drug products. © 2016 Wiley Periodicals, Inc.

  12. Formulation and process considerations affecting the stability of solid dosage forms formulated with methacrylate copolymers.

    Science.gov (United States)

    Petereit, H U; Weisbrod, W

    1999-01-01

    General considerations concerning the stability of coated dosage forms are discussed, in order to avoid predictable interactions which may cause long-term stability problems. As polymers themselves maintain a high chemical stability and a low reactivity, instability phenomena mainly have to be explained by interactions of low molecular weight substances or physical changes. Possible interactions of functional groups can be predicted easily and insulating subcoates are proper countermeasures. Impurities, remaining in the polymeric material from the manufacturing process, may accelerate the hydrolysis of sensitive drugs. Instabilities of coated dosage forms are mainly based on physical interactions, caused by improper formulations of coating suspensions (i.e. plasticizers or pigments) or the film coating process. Residual moisture or solvents, probably enclosed in the core and migrating over time, may increase the permeability of coatings, due to plasticizing effects. The functionality of coatings from aqueous dispersions is linked to coalescence of latex particles. Thus any incomplete film formation, caused by too high or too low coating temperatures, may result in high permeable coatings. During storage, preferably under stress conditions this process will continue and thus change the release profile. Therefore bed temperatures of 10-20 degrees C above MFT must ensure the formation of homogeneous polymer layers during the coating process. Stability test procedures and packaging materials also need to be adapted to the physicochemical properties of the dosage form, in order to get meaningful results in stability tests.

  13. Microstructural effects in drug release by solid and cellular polymeric dosage forms: A comparative study.

    Science.gov (United States)

    Blaesi, Aron H; Saka, Nannaji

    2017-11-01

    In recent studies, we have introduced melt-processed polymeric cellular dosage forms to achieve both immediate drug release and predictable manufacture. Dosage forms ranging from minimally-porous solids to highly porous, open-cell and thin-walled structures were prepared, and the drug release characteristics investigated as the volume fraction of cells and the excipient molecular weight were varied. In the present study, both minimally-porous solid and cellular dosage forms consisting of various weight fractions of Acetaminophen drug and polyethylene glycol (PEG) excipient are prepared and analyzed. Microstructures of the solid forms and the cell walls range from single-phase solid solutions of the excipient and a small amount of drug molecules to two-phase composites of the excipient and tightly packed drug particles. Results of dissolution experiments show that the minimally-porous solid forms disintegrate and release drug by slow surface erosion. The erosion rate decreases as the drug weight fraction is increased. By contrast, the open-cell structures disintegrate rapidly by viscous exfoliation, and the disintegration time is independent of drug weight fraction. Drug release models suggest that the solid forms erode by convective mass transfer of the faster-eroding excipient if the drug volume fraction is small. At larger drug volume fractions, however, the slower-eroding drug particles hinder access of the free-flowing fluid to the excipient, thus slowing down erosion of the composite. Conversely, the disintegration rate of the cellular forms is limited by diffusion of the dissolution fluid into the excipient phase of the thin cell walls. Because the wall thickness is of the order of the drug particle size, and the particles are enveloped by the excipient during melt-processing, the drug particles cannot hinder diffusion through the excipient across the walls. Thus the disintegration time of the cellular forms is mostly unaffected by the volume fraction of drug

  14. Development and Validation of a HPLC Method for the Determination of Lacidipine in Pure Form and in Pharmaceutical Dosage Form

    International Nuclear Information System (INIS)

    Vinodh, M.; Vinayak, M.; Rahul, K.; Pankaj, P.

    2012-01-01

    A simple and reliable high-performance liquid chromatography (HPLC) method was developed and validated for Lacidipine in pure form and pharmaceutical dosage form. The method was developed on X bridge C-18 column (150 mm x 4.6 mm, 5 μm) with a mobile phase gradient system of ammonium acetate and acetonitrile. The effluent was monitored by PDA detector at 240 nm. Calibration curve was linear over the concentration range of 50-250 μg/ml. For Intra-day and inter-day precision % RSD values were found to be 0.83 % and 0.41 % respectively. Recovery of Lacidipine was found to be in the range of 99.78-101.76 %. The limits of detection (LOD) and quantification (LOQ) were 1.0 and 7.3 μg/ml respectively. The developed RP-HPLC method was successfully applied for the quantitative determination of lacidipine in pharmaceutical dosage. (author)

  15. The effect of miscellaneous oral dosage forms on the environmental pollution of sulfonamides in pig holdings.

    Science.gov (United States)

    Stahl, Jessica; Zessel, Katrin; Schulz, Jochen; Finke, Jan Henrik; Müller-Goymann, Christel Charlotte; Kietzmann, Manfred

    2016-04-01

    Due to antibiotic treatment of humans and animals, the prevalence of bacterial resistances increases worldwide. Especially in livestock farming, large quantities of faeces contaminated with antibiotics pose a risk of the carryover of the active ingredient to the environment. Accordingly, the aim of the present study was the evaluation of the benefit of different oral dosage forms (powder, pellets, granula) in pigs concerning the environmental pollution of sulfadiazine. Two subtherapeutic dosages were evaluated in powder mixtures to gain information about their potential to pollute the pig barn. Furthermore, a new group of pigs was kept in the stable after powder feeding of another pig group to determine the possible absorption of environmentally distributed antibiotics. Pigs were orally treated with three dosage forms. Simultaneously, sedimentation and airborne dust were collected and plasma and urine levels were determined. All formulations result in comparable plasma and urine levels, but massive differences in environmental pollution (powder > pellets, granula). Pigs housing in a contaminated barn exhibit traces of sulfadiazine in plasma and urine. Using pharmaceutical formulations like pellets or granula, the environmental pollution of sulfonamides can significantly be diminished due to massive dust reduction during feeding.

  16. Enhancement of bioavailability of ketoprofen using dry elixir as a novel dosage form.

    Science.gov (United States)

    Ahn, H J; Kim, K M; Kim, C K

    1998-07-01

    To enhance the dissolution rate and bioavailability of poorly water-soluble ketoprofen, a novel oral dosage form of ketoprofen, termed ketoprofen dry elixir, was developed by the spray-drying technique. Ketoprofen, dextrin, and sodium lauryl sulfate were dissolved in an ethanol-water mixture (20:25 w/w) and thereafter spray-dried to form the ketoprofen dry elixir. Comparative studies on the in vitro dissolution and in vivo adsorption of ketoprofen in the form of dry elixir and powder were carried out. Ketoprofen in the dry elixir completely dissolved within 5 min. On the other hand, only about 50.1% of ketoprofen powder alone dissolved during 60 min. The initial dissolution rate of ketoprofen in the dry elixir markedly increased in distilled water at 37 degrees C, becoming fourfold higher than that of ketoprofen powder alone. The maximal plasma concentration of ketoprofen (Cmax) and the area under the concentration-time curve from zero to 8 hr (AUC0-8 hr) after the oral administration of dry elixir increased about 3.2- (24.6 versus 7.6 micrograms/ml) and 2.2-(38.4 versus 17.3 micrograms hr/ml) fold compared with powder alone. It was obvious that ketoprofen dry elixir might be a useful solid dosage form to improve the dissolution rate and bioavailability of poorly water-soluble ketoprofen.

  17. A novel solid dosage form of rifampicin and isoniazid with improved functionality.

    Science.gov (United States)

    Gohel, Mukesh C; Sarvaiya, Krishnakant G

    2007-08-24

    The aim of the present investigation was to develop a novel dosage form of rifampicin and isoniazid to minimize degradation of rifampicin in acidic medium and to modulate the release of rifampicin in the stomach and isoniazid in the intestine. Gastroretentive tablets of rifampicin (150 mg) were prepared by the wet granulation method using hydroxypropyl methylcellulose, calcium carbonate, and polyethylene glycol 4000. The granules and tablets of rifampicin were characterized. Hard gelatin capsules (size 4) containing a compacted mass of isoniazid (150 mg) and dicalcium phosphate (75 mg) were enteric coated. Two tablets of rifampicin and 1 capsule (size 4) of isoniazid were put into a hard gelatin capsule (size 00). The in vitro drug release and in vitro drug degradation studies were performed. Rifampicin was released over 4 hours by zero-order kinetics from the novel dosage form. More than 90% of isoniazid was released in alkaline medium in 30 minutes. The results of dissolution studies with the US Pharmacopeia XXIII method revealed that a substantial amount of rifampicin was degraded from the immediate release capsule containing rifampicin and isoniazid powder owing to drug accumulation in the dissolution vessel and also to the presence of isoniazid. The degradation of rifampicin to 3-formyl rifampicin SV (3FRSV) was arrested (3.6%-4.8% degradation of rifampicin at 4 hours) because of the minimization of physical contact between the 2 drugs and controlled release of rifampicin in acidic medium in the modified Rossett-Rice apparatus. This study concludes that the problem of rifampicin degradation can be alleviated to a certain extent by this novel dosage form.

  18. Stability Indicating LC-Method for Estimation of Paracetamol and Lornoxicam in Combined Dosage Form

    OpenAIRE

    Shah, Dimal A.; Patel, Neel J.; Baldania, Sunil L.; Chhalotiya, Usman K.; Bhatt, Kashyap K.

    2011-01-01

    A simple, specific and stability indicating reversed phase high performance liquid chromatographic method was developed for the simultaneous determination of paracetamol and lornoxicam in tablet dosage form. A Brownlee C-18, 5 μm column having 250×4.6 mm i.d. in isocratic mode, with mobile phase containing 0.05 M potassium dihydrogen phosphate:methanol (40:60, v/v) was used. The flow rate was 1.0 ml/min and effluents were monitored at 266 nm. The retention times of paracetamol and lornoxicam ...

  19. Stability-indicating HPLC determination of pramipexole dihydrochloride in bulk drug and pharmaceutical dosage form

    OpenAIRE

    Panditrao, Vedavati M; Sarkate, Aniket P; Sangshetti, Jaiprakash N; Wakte, Pravin S; Shinde, Devanand B

    2011-01-01

    A novel stability-indicating high-performance liquid chromatographic assay method was developed and validated for quantitative determination of pramipexole dihydrochloride in bulk drugs and in pharmaceutical dosage form in the presence of degradation products. An isocratic, reversed phase HPLC method was developed to separate the drug from the degradation products, using an Ace5-C18 (250×4.6 mm, 5 µm) advance chromatography column, and 10 mmol L-1 ammonium acetate and acetonitrile (75:25 v/v)...

  20. Colorimetric determination of a paracetamole in raw material and in pharmaceutical dosage forms

    International Nuclear Information System (INIS)

    Usifoh, C.O; Adelusi, S.A.; Adebambo, R.F.

    2002-01-01

    A rapid, accurate and simple method is proposed for the determination of p-acetaminophen (paracetamole) in raw material, tablets and syrups. The method is based on measuring the intensity of the yellow color that developed when acute acetaminophen is allowed to react with p-dimethylaminobenzaldehyde in 2M HCl after heating. The color which absorbs in the visible region of gamma 450 nm is stable for several hours and the intensity is directly proportional to the concentration of the drug, that is, Beer lambert law is obeyed. The method can be used to analyse paracetamole in raw material and in pharmaceutical dosage forms. (author)

  1. Analytical Method Development and Validation of Solifenacin in Pharmaceutical Dosage Forms by RP-HPLC

    OpenAIRE

    Shaik, Rihana Parveen; Puttagunta, Srinivasa Babu; Kothapalli Bannoth, Chandrasekar; Challa, Bala Sekhara Reddy

    2014-01-01

    A new, accurate, precise, and robust HPLC method was developed and validated for the determination of solifenacin in tablet dosage form. The chromatographic separation was achieved on an Inertsil ODS 3V C18 (150 mm × 4.6 mm, 5 μm) stationary phase maintained at ambient temperature with a mobile phase combination of monobasic potassium phosphate (pH 3.5) containing 0.1% triethylamine and methanol (gradient mode) at a flow rate of 1.5 mL/min, and the detection was carried out by using UV detect...

  2. HPLC DETERMINATION OF FENBENDAZOLE AND IVERMECTIN SIMULTANEOUSLY IN BULK AND PHARMACEUTICAL DOSAGE FORMS

    OpenAIRE

    Battula Sreenivasa Rao, Mandapati Varaprasad Reddy*, Bhatraju Sreenivasa Rao

    2017-01-01

    In the present study, a simple, precise and accurate high performance liquid chromatography with photodiode array detector was developed for the simultaneous estimation of ivermectin & fenbendazole in bulk and tablet dosage forms. A Zorbax C8 column (250 cm × 4.6 mm × 5 μm) with mobile phase consisting of 0.1 M potassium dihydrogen orthophosphate and methanol (60:40 v/v) having pH 4.5 (adjusted with orthophosphoric acid) was used. The flow rate was 1.2 ml/min and the effluents were detected a...

  3. Dry coating of solid dosage forms: an overview of processes and applications.

    Science.gov (United States)

    Foppoli, Anastasia Anna; Maroni, Alessandra; Cerea, Matteo; Zema, Lucia; Gazzaniga, Andrea

    2017-12-01

    Dry coating techniques enable manufacturing of coated solid dosage forms with no, or very limited, use of solvents. As a result, major drawbacks associated with both organic solvents and aqueous coating systems can be overcome, such as toxicological, environmental, and safety-related issues on the one hand as well as costly drying phases and impaired product stability on the other. The considerable advantages related to solventless coating has been prompting a strong research interest in this field of pharmaceutics. In the article, processes and applications relevant to techniques intended for dry coating are analyzed and reviewed. Based on the physical state of the coat-forming agents, liquid- and solid-based techniques are distinguished. The former include hot-melt coating and coating by photocuring, while the latter encompass press coating and powder coating. Moreover, solventless techniques, such as injection molding and three-dimensional printing by fused deposition modeling, which are not purposely conceived for coating, are also discussed in that they would open new perspectives in the manufacturing of coated-like dosage forms.

  4. Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Folic Acid.

    Science.gov (United States)

    Hofsäss, Martin A; Souza, Jacqueline de; Silva-Barcellos, Neila M; Bellavinha, Karime R; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Parr, Alan; Langguth, Peter; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Mehta, Mehul U; Dressman, Jennifer B

    2017-12-01

    This work presents a review of literature and experimental data relevant to the possibility of waiving pharmacokinetic bioequivalence studies in human volunteers for approval of immediate-release solid oral pharmaceutical forms containing folic acid as the single active pharmaceutical ingredient. For dosage forms containing 5 mg folic acid, the highest dose strength on the World Health Organization Essential Medicines List, the dose/solubility ratio calculated from solubility studies was higher than 250 mL, corresponding to a classification as "not highly soluble." Small, physiological doses of folic acid (≤320 μg) seem to be absorbed completely via active transport, but permeability data for higher doses of 1-5 mg are inconclusive. Following a conservative approach, folic acid is classified as a Biopharmaceutics Classification System class IV compound until more reliable data become available. Commensurate with its solubility characteristics, the results of dissolution studies indicated that none of the folic acid products evaluated showed rapid dissolution in media at pH 1.2 or 4.5. Therefore, according to the current criteria of the Biopharmaceutics Classification System, the biowaiver approval procedure cannot be recommended for immediate-release solid oral dosage forms containing folic acid. Copyright © 2017 American Pharmacists Association®. All rights reserved.

  5. Preparation and characterization of solid oral dosage forms containing soy isoflavones

    Directory of Open Access Journals (Sweden)

    Stela R. de Oliveira

    2013-02-01

    Full Text Available Soy isoflavones have been extensively used for menopausal symptoms and prevention of hormone-related cancer, osteoporosis and cardiovascular diseases. Commercially available forms of isoflavones include supplements, capsules and tablets. However, the non-standardization of soy isoflavones extracts and different dissolution profiles of these solid dosage forms highlight the need of additional studies on the development of well characterized pharmaceutical dosage forms of isoflavones. In this work, immediate release oral tablets of soy isoflavones were obtained and evaluated. Genistein and daidzein, were the main constituents of the dried soy extract. Preparation of the tables was accomplished in a rotary tableting machine following either a dry mixture for direct compression or wet granulation with different excipients. Powder, granules and tablets were evaluated for several parameters, including flow properties, Carr and Hausner indexes, hardness, friability, disintegration time and drug release profile. Also, a fast and validated HPLC analytical method for both genistein and daidzein was developed. Formulations containing sodium croscarmellose and sodium dodecyl sulfate resulted in better flowability as indicated by the flow rate and angle of repose, faster disintegration time and immediate release dissolution profile.

  6. Determination of some histamine H1-receptor antagonists in dosage forms.

    Science.gov (United States)

    Gazy, Azza A; Mahgoub, Hoda; El-Yazbi, F A; El-Sayed, M A; Youssef, Rasha M

    2002-10-15

    Three simple and accurate methods are presented for determination of Cetirizine, Fexofenadine, Loratadine and Acrivastine in pure form and commercial dosage forms. The first method is based on the reaction of the above cited drugs with bromocresol purple dye to form ion-pair complex extractable with chloroform and subsequently measured spectrophotometrically. Secondly, eosin gives with these drugs ion-pair complex, measurable directly without extraction both spectrophotometrically and spectrofluorimetrically. The last method involves the base-catalysed condensation of mixed anhydrides of organic acids (citric acid/acetic anhydride) where as the tertiary amino group in the above-cited drugs acts as the basic catalyst. The product of condensation is measured spectrophotometrically. All the reaction conditions for the proposed methods have been studied. Copyright 2002 Elsevier Science B.V.

  7. A Novel Disintegration Tester for Solid Dosage Forms Enabling Adjustable Hydrodynamics.

    Science.gov (United States)

    Kindgen, Sarah; Rach, Regine; Nawroth, Thomas; Abrahamsson, Bertil; Langguth, Peter

    2016-08-01

    A modified in vitro disintegration test device was designed that enables the investigation of the influence of hydrodynamic conditions on disintegration of solid oral dosage forms. The device represents an improved derivative of the compendial PhEur/USP disintegration test device. By the application of a computerized numerical control, a variety of physiologically relevant moving velocities and profiles can be applied. With the help of computational fluid dynamics, the hydrodynamic and mechanical forces present in the probe chamber were characterized for a variety of device moving speeds. Furthermore, a proof of concept study aimed at the investigation of the influence of hydrodynamic conditions on disintegration times of immediate release tablets. The experiments demonstrated the relevance of hydrodynamics for tablet disintegration, especially in media simulating the fasted state. Disintegration times increased with decreasing moving velocity. A correlation between experimentally determined disintegration times and computational fluid dynamics predicted shear stress on tablet surface was established. In conclusion, the modified disintegration test device is a valuable tool for biorelevant in vitro disintegration testing of solid oral dosage forms. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  8. Development and Statistical Validation of Spectrophotometric Methods for the Estimation of Nabumetone in Tablet Dosage Form

    Directory of Open Access Journals (Sweden)

    A. R. Rote

    2010-01-01

    Full Text Available Three new simple, economic spectrophotometric methods were developed and validated for the estimation of nabumetone in bulk and tablet dosage form. First method includes determination of nabumetone at absorption maxima 330 nm, second method applied was area under curve for analysis of nabumetone in the wavelength range of 326-334 nm and third method was First order derivative spectra with scaling factor 4. Beer law obeyed in the concentration range of 10-30 μg/mL for all three methods. The correlation coefficients were found to be 0.9997, 0.9998 and 0.9998 by absorption maxima, area under curve and first order derivative spectra. Results of analysis were validated statistically and by performing recovery studies. The mean percent recoveries were found satisfactory for all three methods. The developed methods were also compared statistically using one way ANOVA. The proposed methods have been successfully applied for the estimation of nabumetone in bulk and pharmaceutical tablet dosage form.

  9. RP-HPLC Method for the Estimation of Nebivolol in Tablet Dosage Form

    Directory of Open Access Journals (Sweden)

    M. K. Sahoo

    2009-01-01

    Full Text Available A reverse phase HPLC method is described for the determination of nebivolol in tablet dosage form. Chromatography was carried on a Hypersil ODS C18 column using a mixture of methanol and water (80:20 v/v as the mobile phase at a flow rate of 1.0 mL/min with detection at 282 nm. Chlorzoxazone was used as the internal standard. The retention times were 3.175 min and 4.158 min for nebivolol and chlorzoxazone respectively. The detector response was linear in the concentration of 1-400 μg/mL. The limit of detection and limit of quantification was 0.0779 and 0.2361 μg/mL respectively. The percentage assay of nebivolol was 99.974%. The method was validated by determining its sensitivity, accuracy and precision. The proposed method is simple, fast, accurate and precise and hence can be applied for routine quality control of nebivolol in bulk and tablet dosage form.

  10. Design of a gastroretentive mucoadhesive dosage form of furosemide for controlled release

    Directory of Open Access Journals (Sweden)

    Sharad S. Darandale

    2012-10-01

    Full Text Available The aim of the present study was to develop and characterize a gastroretentive dosage form suitable for controlled drug release. It consists of a drug loaded polymeric film made up of a bilayer of immediate (IR and controlled release (CR layers folded into a hard gelatin capsule. Gastroretention results from unfolding and swelling of the film and its bioadhesion to the gastric mucosa. Furosemide, a drug with a narrow absorption window, was selected as the model drug. Inclusion of hydroxypropyl β-cyclodextrin in both layers and Carbopol® 971P NF in the CR layer of the bilayer film resulted in optimum drug release, bioadhesion and mechanical properties. The film with zig-zag folding in the capsule was shown to unfold and swell under acidic conditions and provide IR of drug over 1 h and CR for up to 12 h in acidic medium. X-ray diffraction, differential scanning calorimetry and scanning electron microscopy revealed uniform dispersion of furosemide in the polymeric matrices. The results indicate the dosage form is gastroretentive and can provide controlled release of drugs with narrow therapeutic windows.

  11. Dropwise additive manufacturing of pharmaceutical products for melt-based dosage forms.

    Science.gov (United States)

    Içten, Elçin; Giridhar, Arun; Taylor, Lynne S; Nagy, Zoltan K; Reklaitis, Gintaras V

    2015-05-01

    The US Food and Drug Administration introduced the quality by design approach and process analytical technology guidance to encourage innovation and efficiency in pharmaceutical development, manufacturing, and quality assurance. As part of this renewed emphasis on the improvement of manufacturing, the pharmaceutical industry has begun to develop more efficient production processes with more intensive use of online measurement and sensing, real-time quality control, and process control tools. Here, we present dropwise additive manufacturing of pharmaceutical products (DAMPP) as an alternative to conventional pharmaceutical manufacturing methods. This mini-manufacturing process for the production of pharmaceuticals utilizes drop on demand printing technology for automated and controlled deposition of melt-based formulations onto edible substrates. The advantages of drop-on-demand technology, including reproducible production of small droplets, adjustable drop sizing, high placement accuracy, and flexible use of different formulations, enable production of individualized dosing even for low-dose and high-potency drugs. In this work, DAMPP is used to produce solid oral dosage forms from hot melts of an active pharmaceutical ingredient and a polymer. The dosage forms are analyzed to show the reproducibility of dosing and the dissolution behavior of different formulations. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  12. A progressive review of Sandhana kalpana (Biomedical fermentation): An advanced innovative dosage form of Ayurveda

    Science.gov (United States)

    Chaudhary, Anand; Singh, Neetu; Dalvi, Madhuri; Wele, Asmita

    2011-01-01

    Sandhana kalpana (biomedical fermented formulations) are one of the best dosage forms of Ayurveda in practice since thousands of years. In order to prepare these medicaments, certain sets of conditions are prearranged, which lead to fermentation. Thus, products bequeath with self-generated ethyl alcohol, which potentiate these preparations (Asava–Arishta), pharmaceutically and therapeutically. Commonly, medicinal and commercial components of these formulations are prompting many researchers to contribute in manufacturing, quality control, safety, and efficacy of these formulations. To cope up with this, literature related to Asava–Arishta has been surveyed from the Vedic period to recent publications of Government of India, ie, Ayurvedic Formulary of India, and presented briefly here. In this review paper, we have discussed pioneering facts such as nature and amount of carbohydrate, type of containers, optimum temperature, variety and relevance of initiator of fermentation, manufacturing, regulatory rules, and business aspects of Asava-Arishta. After going through this basic information, any academician or researcher may show a way to further strengthen this dosage form. PMID:22529661

  13. Development of polymer film dosage forms of lidocaine for buccal administration: II. Comparison of preparation methods.

    Science.gov (United States)

    Okamoto, Hirokazu; Nakamori, Takahiko; Arakawa, Yotaro; Iida, Kotaro; Danjo, Kazumi

    2002-11-01

    In previous studies, we prepared film dosage forms of lidocaine (LC) with hydroxypropylcellulose (HPC) as a film base using the solvent evaporation (SE) method. However, from the viewpoint of environmental issues, a reduction in organic solvent use in pharmaceutical and other industries is required. In this study, we prepared the LC films by direct compression of the physical mixture (DCPM method) and direct compression of the spray dried powder (DCSD method). Magnesium stearate, which was required as a lubricant for direct compression, showed no effect on the LC release rate. The LC release rate (%/h) was independent of the compression pressure, but a higher pressure was preferable to easily remove the film from the punches. An increase in the film weight decreased the LC release rate expressed in %/h, whereas no significant effect of film weight was observed on the LC release rate from unit surface area expressed in mg/h/cm(2). The LC release rate (%/h) was independent of the LC content, suggesting that the LC release rate (mg/h) can be quantitatively controlled by changing the LC content in the formulation. The LC release rate and penetration rate were affected by the preparation method; that is, DCPM method dosage form. Copyright 2002 Wiley-Liss, Inc. and the American Pharmaceutical Association J Pharm Sci 91:2424-2432, 2002

  14. Consumer Preferences and Perceptions towards the use Colored Oral Solid Dosage Forms in Baghdad

    Directory of Open Access Journals (Sweden)

    Inas Rifaat Ibrahim,*, Mohamed Izham M.I & Mahmoud Al-Haddad

    2010-10-01

    Full Text Available Objective: The main aims of this study were to determine consumers’ preferences and perceptions in Baghdad towards the color of Oral Solid Dosage Form.Materials and Methods: A cross sectional study was conducted using a self–administered questionnaire. A convenient sampling method was adopted to approach the consumers visiting the community pharmacies in Baghdad.The data collected was analyzed using SPSS version 16 ®. Anon-parametric statistics i.e [Chi-square, Mann-Whitney and Kruskal-Wallis tests] were used to evaluate the association of demographic variables with respondents perceptions toward physical characteristics of Oral Solid Dosage Form.Results: Colored OSDF was preferred by 76.4% of consumers.Significant differences in this preference were found among genders (P=0.029; age (P<0.001; educational level (P=0.001;and monthly income level (0.007. Further, consumers perceived that color of OSDF is related with the therapeutic activity of medicine. Significant differences in this perception were found to be influenced by gender (P=0.016; age group(P<0.001; and educational level (P<0.001.Conclusion: In a conclusion, color was the most preferred characteristic of OSDF by Baghdadi consumers with the perceptions that color is related to therapeutic activity of medicines. Gender, age, educational level, and monthly income are important factors that are associated with the preferences and perceptions toward colored OSDF.

  15. Spectrophotometric method for simultaneous estimation of atazanavir sulfate and ritonavir in tablet dosage form

    Directory of Open Access Journals (Sweden)

    Disha A Patel

    2015-01-01

    Full Text Available Background: Ritonavir (RTV and atazanavir sulfate (ATV are protease inhibitor and RTV mostly used as a booster for increasing the bioavailability of other protease inhibitors like ATV. Aims: Quality assessment of the new dosage form of RTV and ATV i.e., tablets is very essential and hence this work deals with to develop sensitive, simple and precise method for simultaneous estimation of ATV and RTV in tablet dosage form by absorbance correction method. Materials and Methods: The present work was carried out on Shimadzu Ultraviolate(UV-1700 double beam spectrophotometer with 1 cm path length supported by S Shimadzu, model-1700(Japan, UV-Probe software, version 2.31 was used for spectral measurements with 10 mm matched quartz cells. Standard ATV and RTV were supplied by Cipla Pharmaceutical Ltd. Methanol was purchased from Finar Chemicals Pvt. Ltd. Results and Conclusion: The λmax or the absorption maxima for ATV and RTV were found to be 279 and 240 nm, respectively in methanol as solvent. The drugs follow Beer-Lambert′s law in the concentration range 30-90 and 10-30 μg/mL for ATV and RTV, respectively. The percentage recovery was found to be 100-100.33% and 100-101.5% for ATV and RTV, respectively. The method was validated for different parameters as per the International Conference for Harmonization Guidelines.

  16. Continuous powder feeding for pharmaceutical solid dosage form manufacture: a short review.

    Science.gov (United States)

    Blackshields, Caroline A; Crean, Abina M

    2018-07-01

    There has been a noticeable shift from pharmaceutical batch processing towards a more continuous mode of manufacture for solid oral dosage forms. Continuous solid oral dose processes would not be possible in the absence of a highly accurate feeding system. The performance of feeders defines the content of formulations and is therefore a critical operation in continuous manufacturing of solid dosage forms. It was the purpose of this review to review the role of the initial powder feeding step in a continuous manufacturing process. Different feeding mechanisms are discussed with a particular emphasis on screw controlled loss in weight (LIW) feeding. The importance of understanding the physical properties of the raw materials and its impact on the feeding process is reviewed. Prior knowledge of materials provides an initial indication of how the powders will behave through processing and facilitates in the selection of the most suitable (i) feeder (capacity), (ii) feeding mechanism, and (iii) in the case of screw feeder - screw type. The studies identified in this review focus on the impact of material on powder feeding performance.

  17. Development and characterization of a gastroretentive dosage form composed of chitosan and hydroxyethyl cellulose for alendronate

    Directory of Open Access Journals (Sweden)

    Chen YC

    2013-12-01

    Full Text Available Ying-Chen Chen,1,* Hsiu-O Ho,1,* Chiao-Chi Chiu,1 Ming-Thau Sheu1,2 1School of Pharmacy, College of Pharmacy, Taipei Medical University, 2Clinical Research Center and Traditional Herbal Medicine Research Center, Taipei Medical University Hospital, Taipei, Taiwan*These authors contributed equally to this workAbstract: In this study, alendronate, the most commonly used biphosphonate for treating osteoporosis, was formulated as gastroretentive dosage form (GRDF tablets to enhance its oral bioavailability. GRDF tablets were characterized with the effects of different molecular weights (MWs of chitosan (CS and hydroxyethyl cellulose (HEC at various ratios on swelling, floating, and physical integrity. The CS component was formed using various acids: acetic, lactic, malic, succinic, and citric, and a high viscosity grade of HEC was selected. The results demonstrated that the swelling ratios of the formulations comprising high MW CS were lower than those of low or medium MW CS when salts were formed with any countering acids except for acetic acid. The decreasing ranking of the swelling rates was: CS-citrate > CS-malate > CS-lactate > CS-succinate > CS-acetate. A negative correlation was found between the pKa of the respective countering acid and the swelling rate. The swelling rate was promoted if an acidic salt of CS with a lower water content was incorporated, while it became slower when tablet hardness was higher or the compression force to form tablets was increased. Although HEC did not contribute to swelling or floating, it played a role in maintaining structural integrity. A prolonged dissolution profile of alendronate GRDF tablets developed in this study was observed.Keywords: gastroretentive dosage form, chitosan, hydrogel, hydroxyethyl cellulose, swelling, alendronate

  18. The Dosage Form of Aragh in Treatment, from the Iranian Traditional Medicine Perspective.

    Science.gov (United States)

    Adl, Mehdi; Emtiazi, Majid

    2016-05-01

    The Iranian traditional medicine is one of the branches of complementary medicine and it is based on using the dosage forms of plants. One of the most common forms of pharmaceutical plants is Aragh. Due to ease-of-use, distillate is a more acceptable form among the public. In this article, it is attempted to study the usage forms and effects of Aragh according to the valid traditional medicine resources. This article is a review of Iranian traditional medicine textbooks such as Makhzan-ul-dawiah, Gharabadin Kabir, Cannon of Medicine, and other recent texts on medical plants. According to the traditional medicine, the process of getting Aragh is a kind of distillation, which is performed by using Ghar and Alembic (the equipment that are used in distillation). Distillation is the process of extracting and refining the fluid of a plant. Aragh of the plants is much more effective on the body than the plant itself. Traditional medicine regards Aragh as a new kind of drug (medicine) that is rarely mentioned in older texts (except for golab). However, the modern medicine regards it as a dosage form of essence, which is dissolved in water. The more the essence, the better the distillate gets. According to the traditional medicine sources, since the time of Hakim Aghil Khorasani, Aragh was used more and more every day. About 100 kinds of Araghs are mentioned in ancient texts, which are extracted from simple plants. Considering the distillation process and the way it performs, and by knowing that Aragh is a plant's softest and the most influential entity, it seems that it has a huge effect on Arvah and Ghova, the main parts like heart and brain and nervous parts.

  19. Antioxidant activity evaluation of new dosage forms as vehicles for dehydrated vegetables.

    Science.gov (United States)

    Romero-de Soto, María Dolores; García-Salas, Patricia; Fernández-Arroyo, Salvador; Segura-Carretero, Antonio; Fernández-Campos, Francisco; Clares-Naveros, Beatriz

    2013-06-01

    A dehydrated vegetables mixture loaded in four pharmaceutical dosage forms as powder, effervescent granulate, sugar granulate and gumdrops were investigated for their antioxidant capacity using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) radical scavenging capacity assay, oxygen radical absorbance capacity assay and ferric reducing antioxidant potential assay. Total phenolic content of dehydrated vegetables powder mixture was also measured by the Folin-Ciocalteu method, so as to evaluate its contribution to their total antioxidant function. The effect of different temperatures on stability of these systems after 90 days storage was also evaluated. These formulations presented strong antioxidant properties and high phenolic content (279 mg gallic acid equivalent/g of sample) and thus could be potential rich sources of natural antioxidants. Antioxidant properties differed significantly among selected formulations (p forms are new and innovative approach for vegetable intakes in population with special requirements providing an improvement in the administration of vegetables and fruits.

  20. ANTITUBERCULOSIS DRUG DOSAGE FORMS: RANGE, KEY BENEFITS AND PROSPECTS OF TECHNOLOGICAL IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    M. E. Kim

    2016-01-01

    Full Text Available Interest to research in the development of new formulations of antituberculosis drugs due to the high incidence of tuberculosis in the Republic of Kazakhstan and the Russian Federation nowadays, including with acquired drug resistance. The reason for the development of acquired drug resistance is to interrupt the treatment of patients is the high toxicity of antituberculosis drugs. The improving the efficiency of antituberculosis therapy remains one of the most pressing.The aim this study was to review the dosage forms of antituberculosis drugs currently used and the ways to improve them.Methods. The study was conducted on the basis of scientific analysis (eLibrary database, PubMed, Cyberleninca, patent (kzpatents, reference (Klifar, Drugs register and technical literature.Results. It was revealed that the antituberculosis drugs are available in the form of tablets, capsules, granules for oral use and injection solutions. The advantages and disadvantages of oral dosage forms of antituberculosis drugs: tablets, capsules, granules, syrups, suspensions are described. The importance of the development and implementation in practice of pediatric formulations of antituberculosis drugs is mentioned. The state of current research inhaled formulations for the treatment of tuberculosis is described. The prospects of directional inhalation exposure by immobilization of antituberculosis drugs in liposomes, niosomes, nanocapsules, micelles, micro- and nanoparticles are mentioned. The prospect of the rectal formulations use is described. The increase in interest in the molecular encapsulation of medicinal substances with cyclodextrins in connection with the possibility of increasing the bioavailability of active ingredients, reduce the harmful effects on the gastrointestinal tract, extension, elimination of interaction of incompatible components in combination preparations, the protection of unstable substances is

  1. Design and evaluation of buccal films as paediatric dosage form for transmucosal delivery of ondansetron.

    Science.gov (United States)

    Trastullo, Ramona; Abruzzo, Angela; Saladini, Bruno; Gallucci, Maria Caterina; Cerchiara, Teresa; Luppi, Barbara; Bigucci, Federica

    2016-08-01

    In the process of implementation and innovation of paediatric dosage forms, buccal films for transmucosal administration of drug represent one of the most interesting approach. In fact, films are able to provide an extended duration of activity allowing minimal dosage and frequency and offer an exact and flexible dose, associated with ease of handling. The objective of the present study was to develop polymeric films for the sustained release of ondansetron hydrochloride, a selective inhibitor of 5-HT3 receptors indicated in paediatrics for the prevention and treatment of nausea and vomiting caused by cytotoxic chemotherapy or radiotherapy and postoperatively. Films were prepared by casting and drying of aqueous solutions containing different weight ratios of hydroxypropylmethylcellulose (HPMC) with chitosan (CH) or sodium hyaluronate (HA) or gelatin (GEL) and characterized for their physico-chemical and functional properties. The presence of HA, GEL and CH did not improve the mucoadhesive properties of HPMC film. The inclusion of GEL and CH in HPMC film increased in vitro drug release with respect to the inclusion of HA, although films containing HA showed the highest water uptake. Moreover in agreement with the release behaviour, the inclusion of CH and GEL provided higher drug permeation through porcine buccal mucosa with respect to HPMC film and ensured linear permeation profiles of drug. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. A Simple RP-HPLC Method for Quantitation of Itopride HCl in Tablet Dosage Form.

    Science.gov (United States)

    Thiruvengada, Rajan Vs; Mohamed, Saleem Ts; Ramkanth, S; Alagusundaram, M; Ganaprakash, K; Madhusudhana, Chetty C

    2010-10-01

    An isocratic reversed phase high-performance liquid chromatographic method with ultraviolet detection at 220 nm has been developed for the quantification of itopride hydrochloride in tablet dosage form. The quantification was carried out using C(8) column (250 mm × 4.6 mm), 5-μm particle size SS column. The mobile phase comprised of two solvents (Solvent A: buffer 1.4 mL ortho-phosphoric acid adjusted to pH 3.0 with triethyl amine and Solvent B: acetonitrile). The ratio of Solvent A: Solvent B was 75:25 v/v. The flow rate was 1.0 mL (-1)with UV detection at 220 nm. The method has been validated and proved to be robust. The calibration curve was linear in the concentration range of 80-120% with coefficient of correlation 0.9995. The percentage recovery for itopride HCl was 100.01%. The proposed method was validated for its selectivity, linearity, accuracy, and precision. The method was found to be suitable for the quality control of itopride HCl in tablet dosage formulation.

  3. Non-Conventional Applications of Computerized Tomography: Analysis of Solid Dosage Forms Produced by Pharmaceutical Industry

    International Nuclear Information System (INIS)

    Martins de Oliveira, Jose Jr.; Germano Martins, Antonio Cesar

    2010-01-01

    X-ray computed tomography (CT) refers to the cross-sectional imaging of an object measuring the transmitted radiation at different directions. In this work, we describe a non-conventional application of computerized tomography: visualization and improvements in the understanding of some internal structural features of solid dosage forms. A micro-CT X-ray scanner, with a minimum resolution of 30 μm was used to characterize some pharmaceutical tablets, granules, controlled-release osmotic tablet and liquid-filled soft-gelatin capsules. The analysis presented in this work are essentially qualitative, but quantitative parameters, such as porosity, density distribution, tablets dimensions, etc. could also be obtained using the related CT techniques.

  4. Thermal and Isothermal Methods in Development of Sustained Release Dosage Forms of Ketorolac Tromethamine

    Directory of Open Access Journals (Sweden)

    Dimple Chopra

    2008-01-01

    Full Text Available Differential scanning calorimetry (DSC is a rapid and convenient and conclusive method of screening drug-polymer blend during preformulation studies as it allows polymer incompatibility to be established instantaneously. Various batches of matrix tablets of ketorolac tromethamine (KTM with a series of compatible polymers were prepared. Batches of tablets which gave desired sustained release profile were subjected to stability testing according to ICH guidelines. The analysis for drug content was done using high performance liquid chromatography (HPLC method. The results revealed that there was no statistically significant change in drug content after storage of matrix tablets at elevated temperature of 40°C and 75% relative humidity. From our study we conclude that with careful selection of different polymers and their combinations, a stable sustained release oral dosage form of ketorolac tromethamine can be achieved.

  5. [Study on dosage form design for improving oral bioavailability of traditional Chinese medicines].

    Science.gov (United States)

    Xia, Hai-Jian; Zhang, Zhen-Hai; Yao, Dong-Dong; Jia, Xiao-Bin

    2013-09-01

    Both chemical drugs and traditional Chinese medicines have the problem of low bioavailability. However, as traditional Chinese medicines are a multi-component complex, their dosage forms are required to be designed in line with their characteristics, in order to improve the bioavailability of traditional Chinese medicines. Traditional Chinese medicines are mostly prepared into pill, powder, paste, elixir and decoction, but with such drawbacks as high administration dose and poor efficacy. With the process of modernization of traditional Chinese medicines, new-type preparations have be developed and made outstanding achievements. However, they fail to make an organic integration between traditional Chinese medicine theories and modern preparation theories. Characteristics of traditional Chinese medicines are required to be taken into account during the development of traditional Chinese medicines. In the article, multi-component preparation technology was adopted to establish a multi-component drug release system of traditional Chinese medicines on the basis of multiple components of traditional Chinese medicines.

  6. PAT: From Western solid dosage forms to Chinese materia medica preparations using NIR-CI.

    Science.gov (United States)

    Zhou, Luwei; Xu, Manfei; Wu, Zhisheng; Shi, Xinyuan; Qiao, Yanjiang

    2016-01-01

    Near-infrared chemical imaging (NIR-CI) is an emerging technology that combines traditional near-infrared spectroscopy with chemical imaging. Therefore, NIR-CI can extract spectral information from pharmaceutical products and simultaneously visualize the spatial distribution of chemical components. The rapid and non-destructive features of NIR-CI make it an attractive process analytical technology (PAT) for identifying and monitoring critical control parameters during the pharmaceutical manufacturing process. This review mainly focuses on the pharmaceutical applications of NIR-CI in each unit operation during the manufacturing processes, from the Western solid dosage forms to the Chinese materia medica preparations. Finally, future applications of chemical imaging in the pharmaceutical industry are discussed. Copyright © 2015 John Wiley & Sons, Ltd.

  7. Simultaneous UV Spectrophotometric Determination of Cetrizine and Dextromethorphan in Tablet Dosage Form

    Directory of Open Access Journals (Sweden)

    R. Vijayalakshmi

    2010-01-01

    Full Text Available Two accurate, precise, sensitve and economical procedures for simultaneous estimation of cetrizine and dextromethorphan in tablet dosage forms have been developed. First method employs formation and solving of simultaneous equations using 230 nm and 280 nm as two analytical wavelengths for both drugs in methanol. The second method is Q-analysis based on measurement of absorptivity at 224 nm (as isobestic point and 280 nm (λmax of CTZ. Cetrizine and dextromethorphan at their respective λmax 280 nm and 230 nm and at 224 nm (isobestic point shows linearity in a concentration range of 10-30 mcg/mL for both the drugs. The recovery studies confirmed accuracy of the proposed methods and low values of standard deviation confirmed precision of the methods. The methods were validated as per ICH guidelines.

  8. A Rapid Determination of Cinnarizine in Bulk and Pharmaceutical Dosage Form by LC

    Directory of Open Access Journals (Sweden)

    A. A. Heda

    2010-01-01

    Full Text Available A simple, selective, rapid and precise reverse phase high pressure liquid chromatographic method has been developed for the estimation of cinnarizine from pharmaceutical formulation. The method was developed using MICRA-NPS C18 (length×OD×ID =33×8.0×6.0 mm, 1.5 μm column with a mobile phase consisting of acetonitrile, triethylamine buffer (adjusted to pH 4.5 with 10% w/v potassium hydroxide and tetrahydrofuran in the ratio 30:66:4 respectively, at a flow rate of 0.5 mL/min. Wavelength was fixed at 253 nm. The developed method was validated for linearity, accuracy, precision, limit of detection and limit of quantitation. The proposed method can be used for the routine estimation of cinnarizine in pharmaceutical dosage form.

  9. Development and Validation of UV Spectrophotometric Method For Estimation of Dolutegravir Sodium in Tablet Dosage Form

    International Nuclear Information System (INIS)

    Balasaheb, B.G.

    2015-01-01

    A simple, rapid, precise and accurate spectrophotometric method has been developed for quantitative analysis of Dolutegravir sodium in tablet formulations. The initial stock solution of Dolutegravir sodium was prepared in methanol solvent and subsequent dilution was done in water. The standard solution of Dolutegravir sodium in water showed maximum absorption at wavelength 259.80 nm. The drug obeyed Beer-Lamberts law in the concentration range of 5-40 μg/ mL with coefficient of correlation (R"2) was 0.9992. The method was validated as per the ICH guidelines. The developed method can be adopted in routine analysis of Dolutegravir sodium in bulk or tablet dosage form and it involves relatively low cost solvents and no complex extraction techniques. (author)

  10. Chemometric simultaneous determination of Sofosbuvir and Ledipasvir in pharmaceutical dosage form

    Science.gov (United States)

    Khalili, Mahsa; Sohrabi, Mahmoud Reza; Mirzabeygi, Vahid; Torabi Ziaratgahi, Nahid

    2018-04-01

    Partial least squares (PLS), different families of continuous wavelet transform (CWT), and first derivative spectrophotometry (DS) techniques were studied for quantification of Sofosbuvir (SFB) and Ledipasvir (LDV) simultaneously without separation step. The components were dissolved in Acetonitrile and the spectral behaviors were evaluated in the range of 200 to 400 nm. The ultraviolet (UV) absorbance of LDV exhibits no interferences between 300 and 400 nm and it was decided to predict the LDV amount through the classic spectrophotometry (CS) method in this spectral region as well. Data matrix of concentrations and calibrated models were developed, and then by applying a validation set the accuracy and precision of each model were studied. Actual concentrations versus predicted concentrations plotted and good correlation coefficients by each method resulted. Pharmaceutical dosage form was quantified by developed methods and the results were compared with the High Performance Liquid Chromatography (HPLC) reference method. Analysis Of Variance (ANOVA) in 95% confidence level showed no significant differences among methods.

  11. Multicomponent chemical imaging of pharmaceutical solid dosage forms with broadband CARS microscopy.

    Science.gov (United States)

    Hartshorn, Christopher M; Lee, Young Jong; Camp, Charles H; Liu, Zhen; Heddleston, John; Canfield, Nicole; Rhodes, Timothy A; Hight Walker, Angela R; Marsac, Patrick J; Cicerone, Marcus T

    2013-09-03

    We compare a coherent Raman imaging modality, broadband coherent anti-Stokes Raman scattering (BCARS) microscopy, with spontaneous Raman microscopy for quantitative and qualitative assessment of multicomponent pharmaceuticals. Indomethacin was used as a model active pharmaceutical ingredient (API) and was analyzed in a tabulated solid dosage form, embedded within commonly used excipients. In comparison with wide-field spontaneous Raman chemical imaging, BCARS acquired images 10× faster, at higher spatiochemical resolution and with spectra of much higher SNR, eliminating the need for multivariate methods to identify chemical components. The significant increase in spatiochemical resolution allowed identification of an unanticipated API phase that was missed by the spontaneous wide-field method and bulk Raman spectroscopy. We confirmed the presence of the unanticipated API phase using confocal spontaneous Raman, which provided spatiochemical resolution similar to BCARS but at 100× slower acquisition times.

  12. HPLC-DAD stability indicating determination of nizatidine in bulk and capsules dosage form

    Directory of Open Access Journals (Sweden)

    Tarek S. Belal

    2013-12-01

    Full Text Available This work describes the stability-indicating determination of the H2-receptor antagonist nizatidine in its bulk and capsules dosage form using high performance liquid chromatography coupled with diode array detector (HPLC-DAD. The developed method involved the use of Thermo Hypersil BDS-C8 (4.6 × 250 mm, 5 μm particle size column and a mobile phase composed of 0.05 M phosphoric acid and acetonitrile (50:50, v/v. The mobile phase was pumped at a flow rate of 1 mL/min. Quantification of nizatidine was based on measuring its peak area at 320 nm. The retention time for nizatidine was about 3.61 min. The reliability and analytical performance of the proposed HPLC procedure were statistically validated with respect to linearity, range, precision, accuracy, specificity, robustness, detection and quantification limits. Calibration curve of nizatidine was linear in the range of 5–50 μg/mL with correlation coefficient >0.9999. The drug was subjected to forced-degradation conditions of acidic and basic hydrolysis, oxidation, dry heat and UV photolysis where it showed considerable degradation in basic and oxidative conditions. The proposed method proved to be specific and stability-indicating by resolution of the drug from its forced-degradation products. The validated HPLC method was applied to the analysis of nizatidine in capsules dosage form where it was quantified with recoveries not less than 98.2%. Assay results were statistically compared to USP 2011 pharmacopeial method where no significant difference was observed between the proposed and reference methods.

  13. Kinetic spectrophotometric method for the determination of perindopril erbumine in pure and commercial dosage forms

    Directory of Open Access Journals (Sweden)

    Nafisur Rahman

    2017-02-01

    Full Text Available A kinetic spectrophotometric method has been developed for the determination of perindopril erbumine in pure and commercial dosage forms. The method is based on the reaction of drug with potassium permanganate in alkaline medium at room temperature (30 ± 1 °C. The reaction was followed spectrophotometrically by measuring the increase in absorbance with time at 603 nm and the initial rate, fixed time (at 8.0 min and equilibrium time (at 90.0 min methods were adopted for constructing the calibration graphs. All the calibration graphs are linear in the concentration range of 5.0–50.0 μg/ml. The limits of detection for initial rate, fixed time and equilibrium time methods were 0.752, 0.882 and 1.091 μg/ml, respectively. The activation parameters such as Ea, ΔH‡, ΔS‡ and ΔG‡ were also determined for the reaction and found to be 60.93 kJ/mol, 56.45 kJ/mol, 74.16 J/K mol and −6.53 kJ/mol, respectively. The variables were optimized and the proposed methods are validated as per ICH guidelines. The method has been further applied to the determination of perindopril erbumine in commercial dosage forms. The analytical results of the proposed methods when compared with those of the reference method show no significant difference in accuracy and precision and have acceptable bias.

  14. Optimization and validation of spectrophotometric methods for determination of finasteride in dosage and biological forms

    Science.gov (United States)

    Amin, Alaa S.; Kassem, Mohammed A.

    2012-01-01

    Aim and Background: Three simple, accurate and sensitive spectrophotometric methods for the determination of finasteride in pure, dosage and biological forms, and in the presence of its oxidative degradates were developed. Materials and Methods: These methods are indirect, involve the addition of excess oxidant potassium permanganate for method A; cerric sulfate [Ce(SO4)2] for methods B; and N-bromosuccinimide (NBS) for method C of known concentration in acid medium to finasteride, and the determination of the unreacted oxidant by measurement of the decrease in absorbance of methylene blue for method A, chromotrope 2R for method B, and amaranth for method C at a suitable maximum wavelength, λmax: 663, 528, and 520 nm, for the three methods, respectively. The reaction conditions for each method were optimized. Results: Regression analysis of the Beer plots showed good correlation in the concentration ranges of 0.12–3.84 μg mL–1 for method A, and 0.12–3.28 μg mL–1 for method B and 0.14 – 3.56 μg mL–1 for method C. The apparent molar absorptivity, Sandell sensitivity, detection and quantification limits were evaluated. The stoichiometric ratio between the finasteride and the oxidant was estimated. The validity of the proposed methods was tested by analyzing dosage forms and biological samples containing finasteride with relative standard deviation ≤ 0.95. Conclusion: The proposed methods could successfully determine the studied drug with varying excess of its oxidative degradation products, with recovery between 99.0 and 101.4, 99.2 and 101.6, and 99.6 and 101.0% for methods A, B, and C, respectively. PMID:23781478

  15. Development and characterization of a gastroretentive dosage form composed of chitosan and hydroxyethyl cellulose for alendronate.

    Science.gov (United States)

    Chen, Ying-Chen; Ho, Hsiu-O; Chiu, Chiao-Chi; Sheu, Ming-Thau

    2014-01-01

    In this study, alendronate, the most commonly used biphosphonate for treating osteoporosis, was formulated as gastroretentive dosage form (GRDF) tablets to enhance its oral bioavailability. GRDF tablets were characterized with the effects of different molecular weights (MWs) of chitosan (CS) and hydroxyethyl cellulose (HEC) at various ratios on swelling, floating, and physical integrity. The CS component was formed using various acids: acetic, lactic, malic, succinic, and citric, and a high viscosity grade of HEC was selected. The results demonstrated that the swelling ratios of the formulations comprising high MW CS were lower than those of low or medium MW CS when salts were formed with any countering acids except for acetic acid. The decreasing ranking of the swelling rates was: CS-citrate > CS-malate > CS-lactate > CS-succinate > CS-acetate. A negative correlation was found between the pKa of the respective countering acid and the swelling rate. The swelling rate was promoted if an acidic salt of CS with a lower water content was incorporated, while it became slower when tablet hardness was higher or the compression force to form tablets was increased. Although HEC did not contribute to swelling or floating, it played a role in maintaining structural integrity. A prolonged dissolution profile of alendronate GRDF tablets developed in this study was observed.

  16. In vivo evaluation of dosage forms: application of gamma scintigraphy to non-enteral routes of administration.

    Science.gov (United States)

    Meseguer, G; Gurny, R; Buri, P

    1994-01-01

    The trend to deliver drugs to defined areas of the body involves sophisticated carriers systems. In addition to the in vitro drug release profile one must be aware of the in vivo behaviour of the dosage form and the drug. Gamma scintigraphy is an elegant way to gain insights of the actual in vivo distribution pattern of dosage forms. This technique relies on the use of radioactive tracers included into the medicament and selected so as to enable an optimum detection by a gamma ray camera. The choice of a convenient label enables the in vivo determination of the targeting of the formulation administered through a large number of routes. The present paper reviews applications of gamma scintigraphy for the evaluation of dosage forms administered by the parenteral, rectal, buccal, nasal, pulmonary, and ophthalmic routes.

  17. [Ascolong: a new buccal dosage form of acetylsalicylic acid to be used and antiaggregant].

    Science.gov (United States)

    Kokurina, E V; Suslina, Z A; Khromov, G L; Davydo, A B; Metelitsa, V I; Ionova, V G; Tanashian, M M; Demina, E G; Bochkareva, E V; Belolipetskaia, V G; Deev, A D; Kucheriaeva, N G; Zidra, S I; Gorin, N N; Rumiantsev, D O

    1998-01-01

    Study of the tolerance and pharmacodynamic and pharmacokinetic characteristics of ascolong, a new buccal dosage form of aspirin containing a very low dose of acetylsalicylic acid (ASA): 12.5 mg. The study was carried out in 43 healthy men (assessment of the drug tolerance) and 19 male patients with coronary disease or cerebrovascular disorders. In 10 patients the antiaggregant efficacy of ascolong administered once or regularly (for 2 weeks) in a dose of 12.5 mg was compared with placebo, in 9 patients a random cross study of 2-week courses of ascolong and Russian aspirin tablets in a dose of 100 mg was carried out. Platelet aggregation was assessed on days 1 and 14 of each course before and 2, 4, and 24 h after the drug intake. Ascolong containing a very low dose of ASA exerts a reliable antiaggregant effect after a single and regular intake, although this effect is less manifest than after aspirin tablets. Profiles of ASA concentrations in the blood were studied. Transbuccal entry of ASA in systemic circulation decelerated its metabolism into a less active metabolite, salicylic acid, due to which fact the ASA microdose had an expressed antiaggregant effect. The drug was sufficiently well tolerated. The new buccal film form of aspirin containing a very low dose of ASA possesses a good antiaggregant effect and is promising in subjects with contraindications to oral intake of aspirin.

  18. Spectrofluorimetric protocol for antidepressant drugs in dosage forms and human plasma through derivatization with dansyl chloride

    Directory of Open Access Journals (Sweden)

    Mahmoud A. Omar

    2017-05-01

    Full Text Available A reliable, sensitive and selective spectrofluorimetric method has been developed for the determination of certain antidepressant drugs namely sertraline hydrochloride, fluoxetine hydrochloride, paroxetine hydrochloride, amineptine hydrochloride and bupropion hydrochloride in pure forms, pharmaceutical formulation and human plasma. The method is based on the reaction of investigated drugs with 5-(dimethylamino naphthalene-1-sulfonyl chloride (dansyl chloride in the presence of 0.5 M sodium carbonate to yield highly fluorescent derivatives, measured at 450 nm (excitation at 347 nm. The different experimental parameters affecting the development and stability of the reaction products were carefully studied and optimized. The calibration plots were constructed over the range of 0.02–0.14 μg mL−1. The proposed method was successfully applied for analysis of cited drugs in dosage forms. The high sensitivity of the proposed method allows the determination of investigated drugs in spiked and real human plasma. Statistical comparisons of the results with the reference methods show an excellent agreement and indicate no significant difference in accuracy and precision.

  19. How to stabilize cilazapril-containing solid dosage forms? The optimization of a final drug formulation

    Directory of Open Access Journals (Sweden)

    Katarzyna Regulska

    2017-03-01

    Full Text Available Cilazapril, a moisture-sensitive compound, is known to undergo rapid degradation which could be additionally facilitated by the presence of excipients that contain or absorb moisture. Hence we investigated the stability of cilazapril in two commercially-available dosage forms and in binary mixtures with the selected excipients used in the studied commercial formulations i.e.: hypromellose, lactose monohydrate, maize starch and talc in order to detect any possible, stability-affecting incompatibilities. Also the impact of the blister made of oriented polyamide/aluminum/polyvinyl chloride//aluminum on cilazapril-containing tablets was researched. A validated HPLC and HPLC-MS methods were used for analysis and the isothermal stress testing conditions were applied (temperature range 318–343 K, relative humidity 76.4% for tablets and temperature 333 K, relative humidity range 50.9–76.4% for binary mixtures. It was shown that the degradation of cilazapril in both, model mixtures and tablets follows the autocatalytic model kinetics and it is more rapid than that observed for pure substance, evidenced by higher degradation rate constants. The immediate packaging protects cilazapril in tablets from degradation only in case of the original drug while in its blistered generic counterpart a slight but statistically insignificant increase of cilazapril decay occurs when compared to bare tablets (p < 0.05. The degradation product of cilazapril in tablets and binary mixtures was identified as cilazaprilat. It was also observed that the increase of relative humidity or the presence of hypromellose, lactose and talc significantly impairs the stability of cilazapril in the aforementioned order. Only maize starch exhibited a positive effect on cilazapril stability (10.8% loss of cilazapril in binary mixture after 360 days of stressing compared to 35% loss of pure cilazapril in analogous test conditions probably thanks to its moisture-scavenging properties

  20. Biowaiver monograph for immediate-release solid oral dosage forms: acetylsalicylic acid.

    Science.gov (United States)

    Dressman, Jennifer B; Nair, Anita; Abrahamsson, Bertil; Barends, Dirk M; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James E; Shah, Vinod P; Zimmer, Markus

    2012-08-01

    A biowaiver monograph for acetylsalicylic acid (ASA) is presented. Literature and experimental data indicate that ASA is a highly soluble and highly permeable drug, leading to assignment of this active pharmaceutical ingredient (API) to Class I of the Biopharmaceutics Classification System (BCS). Limited bioequivalence (BE) studies reported in the literature indicate that products that have been tested are bioequivalent. Most of the excipients used in products with a marketing authorization in Europe are not considered to have an impact on gastrointestinal motility or permeability. Furthermore, ASA has a wide therapeutic index. Thus, the risks to the patient that might occur if a nonbioequivalent product were to be incorrectly deemed bioequivalent according to the biowaiver procedure appear to be minimal. As a result, the BCS-based biowaiver procedure can be recommended for approval of new formulations of solid oral dosage forms containing ASA as the only API, including both multisource and reformulated products, under the following conditions: (1) excipients are chosen from those used in ASA products already registered in International Conference on Harmonization and associated countries and (2) the dissolution profiles of the test and the comparator products comply with the BE guidance. Copyright © 2012 Wiley Periodicals, Inc.

  1. Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Amoxicillin Trihydrate.

    Science.gov (United States)

    Thambavita, Dhanusha; Galappatthy, Priyadarshani; Mannapperuma, Uthpali; Jayakody, Lal; Cristofoletti, Rodrigo; Abrahamsson, Bertil; Groot, Dirk W; Langguth, Peter; Mehta, Mehul; Parr, Alan; Polli, James E; Shah, Vinod P; Dressman, Jennifer

    2017-10-01

    Literature and experimental data relevant to waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release solid oral dosage forms containing amoxicillin trihydrate are reviewed. Solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), therapeutic uses, therapeutic index, excipient interactions, as well as dissolution and BE and bioavailability studies were taken into consideration. Solubility and permeability studies indicate that amoxicillin doses up to 875 mg belong to BCS class I, whereas 1000 mg belongs to BCS class II and doses of more than 1000 mg belong to BCS class IV. Considering all aspects, the biowaiver procedure can be recommended for solid oral products of amoxicillin trihydrate immediate-release preparations containing amoxicillin as the single active pharmaceutical ingredient at dose strengths of 875 mg or less, provided (a) only the excipients listed in this monograph are used, and only in their usual amounts, (b) the biowaiver study is performed according to the World Health Organization-, U.S. Food and Drug Administration-, or European Medicines Agency-recommended method using the innovator as the comparator, and (c) results comply with criteria for "very rapidly dissolving" or "similarly rapidly dissolving." Products containing other excipients and those containing more than 875 mg amoxicillin per unit should be subjected to an in vivo BE study. Copyright © 2017 American Pharmacists Association®. All rights reserved.

  2. Approaches for Establishing Clinically Relevant Dissolution Specifications for Immediate Release Solid Oral Dosage Forms.

    Science.gov (United States)

    Hermans, Andre; Abend, Andreas M; Kesisoglou, Filippos; Flanagan, Talia; Cohen, Michael J; Diaz, Dorys A; Mao, Y; Zhang, Limin; Webster, Gregory K; Lin, Yiqing; Hahn, David A; Coutant, Carrie A; Grady, Haiyan

    2017-11-01

    This manuscript represents the perspective of the Dissolution Analytical Working Group of the IQ Consortium. The intent of this manuscript is to highlight the challenges of, and to provide a recommendation on, the development of clinically relevant dissolution specifications (CRS) for immediate release (IR) solid oral dosage forms. A roadmap toward the development of CRS for IR products containing active ingredients with a non-narrow therapeutic window is discussed, within the context of mechanistic dissolution understanding, supported by in-human pharmacokinetic (PK) data. Two case studies present potential outcomes of following the CRS roadmap and setting dissolution specifications. These cases reveal some benefits and challenges of pursuing CRS with additional PK data, in light of current regulatory positions, including that of the US Food and Drug Administration (FDA), who generally favor this approach, but with the understanding that both industry and regulatory agency perspectives are still evolving in this relatively new field. The CRS roadmap discussed in this manuscript also describes a way to develop clinically relevant dissolution specifications based primarily on dissolution data for batches used in pivotal clinical studies, acknowledging that not all IR product development efforts need to be supported by additional PK studies, albeit with the associated risk of potentially unnecessarily tight manufacturing controls. Recommendations are provided on what stages during the life cycle investment into in vivo studies may be valuable. Finally, the opportunities for CRS within the context of post-approval changes, Modeling and Simulation (M&S), and the application of biowaivers, are briefly discussed.

  3. Biopharmaceutical evaluation of transnasal, sublingual, and buccal disk dosage forms of butorphanol.

    Science.gov (United States)

    Shyu, W C; Mayol, R F; Pfeffer, M; Pittman, K A; Gammans, R E; Barbhaiya, R H

    1993-07-01

    A series of three-way crossover randomized studies were conducted to evaluate the absolute bioavailability of butorphanol, a potent agonist-antagonist analgesic, from transnasal, sublingual, and buccal disk formulations in order to identify a practical alternative to oral administration. In each study, healthy male volunteers received 2 mg doses of butorphanol tartrate intravenously and either transnasally, sublingually or buccally. Serial blood samples were collected over 12 h and butorphanol plasma concentrations were determined by radioimmunoassay. The plasma concentration data were subjected to non-compartmental pharmacokinetic analysis. The elimination half-life of butorphanol was about 3-5 h and was independent of the route of administration. Absorption of butorphanol following transnasal administration was faster than that observed following sublingual or buccal administration. Mean absolute bioavailabilities of sublingual tablet and buccal disk formulation were only 19 per cent and 29 per cent, respectively, but for transnasal administration the value rose significantly, to 70 per cent. Based on the results of these studies, transnasal dosage form of butorphanol was selected for further clinical trials of treatment of moderate to severe pain.

  4. Simultaneous HPTLC Determination of Rabeprazole and Itopride Hydrochloride From Their Combined Dosage Form.

    Science.gov (United States)

    Suganthi, A; John, Sofiya; Ravi, T K

    2008-01-01

    A simple, precise, sensitive, rapid and reproducible HPTLC method for the simultaneous estimation of the rabeprazole and itopride hydrochloride in tablets was developed and validated. This method involves separation of the components by TLC on precoated silica gel G60F254 plate with solvent system of n-butanol, toluene and ammonia (8.5:0.5:1 v/v/v) and detection was carried out densitometrically using a UV detector at 288 nm in absorbance mode. This system was found to give compact spots for rabeprazole (Rf value of 0.23 0.02) and for itopride hydrochloride (Rf value of 0.75+/-0.02). Linearity was found to be in the range of 40-200 ng/spot and 300-1500 ng/spot for rabeprazole and itopride hydrochloride. The limit of detection and limit of quantification for rabeprazole were 10 and 20 ng/spot and for itopride hydrochloride were 50 and 100 ng/spot, respectively. The method was found to be beneficial for the routine analysis of combined dosage form.

  5. Development and evaluation of new multiple-unit levodopa sustained-release floating dosage forms.

    Science.gov (United States)

    Goole, J; Vanderbist, F; Amighi, K

    2007-04-04

    This work relates to the development and the in vitro evaluation of sustained-release minitablets (MT), prepared by melt granulation and subsequent compression, which are designed to float over an extended period of time. Levodopa was used as a model drug. The importance of the composition and manufacturing parameters of the MT on their floating and dissolution properties was then examined. The investigation showed that MT composition and MT diameter had the greatest influence on drug release, which was sustained for more than 8h. By using the same formulation, the best floating properties were obtained with 3mm MT prepared at low compression forces ranging between 50 and 100N. Their resultant-weight (RW) values were always higher than those obtained with a marketed HBS dosage form within 13h. When they were filled into gelatin capsules, no sticking was observed. By evaluating the dissolution profiles of levodopa at different pH values, it was found that dissolution profiles depend more on the prolonged-release ability of Methocel K15M than on the pH-dependent solubility of levodopa. Finally, the robustness of the floating MT was assessed by testing the drug release variability in function of the stirring conditions during dissolution tests.

  6. Transmission FTIR derivative spectroscopy for estimation of furosemide in raw material and tablet dosage form

    Directory of Open Access Journals (Sweden)

    Máximo Gallignani

    2014-10-01

    Full Text Available A Fourier transform infrared derivative spectroscopy (FTIR-DS method has been developed for determining furosemide (FUR in pharmaceutical solid dosage form. The method involves the extraction of FUR from tablets with N,N-dimethylformamide by sonication and direct measurement in liquid phase mode using a reduced path length cell. In general, the spectra were measured in transmission mode and the equipment was configured to collect a spectrum at 4 cm−1 resolution and a 13 s collection time (10 scans co-added. The spectra were collected between 1400 cm−1 and 450 cm−1. Derivative spectroscopy was used for data processing and quantitative measurement using the peak area of the second order spectrum of the major spectral band found at 1165 cm−1 (SO2 stretching of FUR with baseline correction. The method fulfilled most validation requirements in the 2 mg/mL and 20 mg/mL range, with a 0.9998 coefficient of determination obtained by simple calibration model, and a general coefficient of variation <2%. The mean recovery for the proposed assay method resulted within the (100±3% over the 80%–120% range of the target concentration. The results agree with a pharmacopoeial method and, therefore, could be considered interchangeable.

  7. Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Enalapril.

    Science.gov (United States)

    Verbeeck, Roger K; Kanfer, Isadore; Löbenberg, Raimar; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Langguth, Peter; Polli, James E; Parr, Alan; Shah, Vinod P; Mehta, Mehul; Dressman, Jennifer B

    2017-08-01

    Literature data relevant to the decision to allow a waiver of in vivo bioequivalence testing for the marketing authorization of immediate-release, solid oral dosage forms containing enalapril maleate are reviewed. Enalapril, a prodrug, is hydrolyzed by carboxylesterases to the active angiotensin-converting enzyme inhibitor enalaprilat. Enalapril as the maleate salt is shown to be highly soluble, but only 60%-70% of an orally administered dose of enalapril is absorbed from the gastrointestinal tract into the enterocytes. Consequently, enalapril maleate is a Biopharmaceutics Classification System class III substance. Because in situ conversion of the maleate salt to the sodium salt is sometimes used in production of the finished drug product, not every enalapril maleate-labeled finished product actually contains the maleate salt. Enalapril is not considered to have a narrow therapeutic index. With this background, a biowaiver-based approval procedure for new generic products or after major revisions to existing products is deemed acceptable, provided the in vitro dissolution of both test and reference preparation is very rapid (at least 85% within 15 min at pH 1.2, 4.5, and 6.8). Additionally, the test and reference product must contain the identical active drug ingredient. Copyright © 2017 American Pharmacists Association®. All rights reserved.

  8. Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Proguanil Hydrochloride.

    Science.gov (United States)

    Plöger, Gerlinde F; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, Dirk W; Langguth, Peter; Mehta, Mehul U; Parr, Alan; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Dressman, Jennifer B

    2018-07-01

    Literature data relevant to the decision to waive in vivo bioequivalence testing for the approval of generic immediate release solid oral dosage forms of proguanil hydrochloride are reviewed. To elucidate the Biopharmaceutics Classification System (BCS) classification, experimental solubility and dissolution studies were also carried out. The antimalarial proguanil hydrochloride, effective via the parent compound proguanil and the metabolite cycloguanil, is not considered to be a narrow therapeutic index drug. Proguanil hydrochloride salt was shown to be highly soluble according to the U.S. Food and Drug Administration, World Health Organization, and European Medicines Agency guidelines, but data for permeability are inconclusive. Therefore, proguanil hydrochloride is conservatively classified as a BCS class 3 substance. In view of this information and the assessment of risks associated with a false positive decision, a BCS-based biowaiver approval procedure can be recommended for orally administered solid immediate release products containing proguanil hydrochloride, provided well-known excipients are used in usual amounts and provided the in vitro dissolution of the test and reference products is very rapid (85% or more are dissolved in 15 min at pH 1.2, 4.5, and 6.8) and is performed according to the current requirements for BCS-based biowaivers. Copyright © 2018 American Pharmacists Association®. All rights reserved.

  9. Spectrophotometric Quantification of Vilazodone Hydrochloride in Pharmaceutical Dosage Form Using Quality by Design Approach

    International Nuclear Information System (INIS)

    Panda, S.S.; Kumar, B.V.V.R.K.; Beg, S.; Behera, S.

    2015-01-01

    The present work deals with development and validation of a novel, robust, precise and accurate spectrophotometric method, for the estimation of vilazodone hydrochloride in tablets using the principle of Quality by Design (QbD). A fractional factorial design (FFD) was employed for initial parameter screening. Further the screened parameters were subjected to central composite design (CCD) for evaluating method robustness and method optimization. Different statistical parameters were evaluated to decide appropriateness of experimental data. Vilazodone shows absorption maximum at 285 nm using methanol. Factor screening slit width and sampling interval were identified as critical method variables, which were further evaluated by a CCD. Good linearity was obtained for vilazodone in the range of 5-60 μg/ mL with R"2 > 0.999. The method was found to be accurate with good average % recovery (more than 100 %). Developed method was validated as per ICH guidelines. Based on QbD development of spectrophotometric method ensured that quality is built into the method. The method was robust and can be applied for determination of the vilazodone in pharmaceutical dosage form. (author)

  10. Validated spectrophotometric methods for simultaneous determination of troxerutin and carbazochrome in dosage form

    Science.gov (United States)

    Khattab, Fatma I.; Ramadan, Nesrin K.; Hegazy, Maha A.; Al-Ghobashy, Medhat A.; Ghoniem, Nermine S.

    2015-03-01

    Four simple, accurate, sensitive and precise spectrophotometric methods were developed and validated for simultaneous determination of Troxerutin (TXN) and Carbazochrome (CZM) in their bulk powders, laboratory prepared mixtures and pharmaceutical dosage forms. Method A is first derivative spectrophotometry (D1) where TXN and CZM were determined at 294 and 483.5 nm, respectively. Method B is first derivative of ratio spectra (DD1) where the peak amplitude at 248 for TXN and 439 nm for CZM were used for their determination. Method C is ratio subtraction (RS); in which TXN was determined at its λmax (352 nm) in the presence of CZM which was determined by D1 at 483.5 nm. While, method D is mean centering of the ratio spectra (MCR) in which the mean centered values at 300 nm and 340.0 nm were used for the two drugs in a respective order. The two compounds were simultaneously determined in the concentration ranges of 5.00-50.00 μg mL-1 and 0.5-10.0 μg mL-1 for TXN and CZM, respectively. The methods were validated according to the ICH guidelines and the results were statistically compared to the manufacturer's method.

  11. Validation of HPLC and UV spectrophotometric methods for the determination of meropenem in pharmaceutical dosage form.

    Science.gov (United States)

    Mendez, Andreas S L; Steppe, Martin; Schapoval, Elfrides E S

    2003-12-04

    A high-performance liquid chromatographic method and a UV spectrophotometric method for the quantitative determination of meropenem, a highly active carbapenem antibiotic, in powder for injection were developed in present work. The parameters linearity, precision, accuracy, specificity, robustness, limit of detection and limit of quantitation were studied according to International Conference on Harmonization guidelines. Chromatography was carried out by reversed-phase technique on an RP-18 column with a mobile phase composed of 30 mM monobasic phosphate buffer and acetonitrile (90:10; v/v), adjusted to pH 3.0 with orthophosphoric acid. The UV spectrophotometric method was performed at 298 nm. The samples were prepared in water and the stability of meropenem in aqueous solution at 4 and 25 degrees C was studied. The results were satisfactory with good stability after 24 h at 4 degrees C. Statistical analysis by Student's t-test showed no significant difference between the results obtained by the two methods. The proposed methods are highly sensitive, precise and accurate and can be used for the reliable quantitation of meropenem in pharmaceutical dosage form.

  12. Microbiological assay for the determination of meropenem in pharmaceutical dosage form.

    Science.gov (United States)

    Mendez, Andreas S L; Weisheimer, Vanessa; Oppe, Tércio P; Steppe, Martin; Schapoval, Elfrides E S

    2005-04-01

    Meropenem is a highly active carbapenem antibiotic used in the treatment of a wide range of serious infections. The present work reports a microbiological assay, applying the cylinder-plate method, for the determination of meropenem in powder for injection. The validation method yielded good results and included linearity, precision, accuracy and specificity. The assay is based on the inhibitory effect of meropenem upon the strain of Micrococcus luteus ATCC 9341 used as the test microorganism. The results of assay were treated statistically by analysis of variance (ANOVA) and were found to be linear (r=0.9999) in the range of 1.5-6.0 microg ml(-1), precise (intra-assay: R.S.D.=0.29; inter-assay: R.S.D.=0.94) and accurate. A preliminary stability study of meropenem was performed to show that the microbiological assay is specific for the determination of meropenem in the presence of its degradation products. The degraded samples were also analysed by the HPLC method. The proposed method allows the quantitation of meropenem in pharmaceutical dosage form and can be used for the drug analysis in routine quality control.

  13. A validated stability-indicating UPLC method for desloratadine and its impurities in pharmaceutical dosage forms.

    Science.gov (United States)

    Rao, Dantu Durga; Satyanarayana, N V; Malleswara Reddy, A; Sait, Shakil S; Chakole, Dinesh; Mukkanti, K

    2010-02-05

    A novel stability-indicating gradient reverse phase ultra-performance liquid chromatographic (RP-UPLC) method was developed for the determination of purity of desloratadine in presence of its impurities and forced degradation products. The method was developed using Waters Aquity BEH C18 column with mobile phase containing a gradient mixture of solvents A and B. The eluted compounds were monitored at 280nm. The run time was 8min within which desloratadine and its five impurities were well separated. Desloratadine was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. Desloratadine was found to degrade significantly in oxidative and thermal stress conditions and stable in acid, base, hydrolytic and photolytic degradation conditions. The degradation products were well resolved from main peak and its impurities, thus proved the stability-indicating power of the method. The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness. This method was also suitable for the assay determination of desloratadine in pharmaceutical dosage forms.

  14. Microbiological assay for the analysis of certain macrolides in pharmaceutical dosage forms.

    Science.gov (United States)

    Mahmoudi, A; Fourar, R E-A; Boukhechem, M S; Zarkout, S

    2015-08-01

    Clarithromycin (CLA) and roxithromycin (ROX) are macrolide antibiotics with an expanded spectrum of activity that are commercially available as tablets. A microbiological assay, applying the cylinder-plate method and using a strain of Micrococcus luteus ATCC 9341 as test organism, has been used and validated for the quantification of two macrolide drugs; CLA and ROX in pure and pharmaceutical formulations. The validation of the proposed method was carried out for linearity, precision, accuracy and specificity. The linear dynamic ranges were from 0.1 to 0.5μg/mL for both compounds. Logarithmic calibration curve was obtained for each macrolide (r>0.989) with statistically equal slopes varying from 3.275 to 4.038, and a percentage relative standard deviation in the range of 0.24-0.92%. Moreover, the method was applied successfully for the assay of the studied drugs in pharmaceutical tablet dosage forms. Recovery from standard addition experiments in commercial products was 94.71-96.91% regarding clarithromycin and 93.94-98.12% regarding roxithromycin, with a precision (%RSD) 1.32-2.11%. Accordingly, this microbiological assay can be used for routine quality control analysis of titled drugs in tablet formulations. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Bilayered buccal films as child-appropriate dosage form for systemic administration of propranolol.

    Science.gov (United States)

    Abruzzo, Angela; Nicoletta, Fiore Pasquale; Dalena, Francesco; Cerchiara, Teresa; Luppi, Barbara; Bigucci, Federica

    2017-10-05

    Buccal mucosa has emerged as an attractive site for systemic administration of drug in paediatric patients. This route is simple and non-invasive, even if the saliva wash-out effect and the relative permeability of the mucosa can reduce drug absorption. Mucoadhesive polymers represent a common employed strategy to increase the contact time of the formulation at the application site and to improve drug absorption. Among the different mucoadhesive dosage forms, buccal films are particularly addressed for paediatric population since they are thin, adaptable to the mucosal surface and able to offer an exact and flexible dose. The objective of the present study was to develop bilayered buccal films for the release of propranolol hydrochloride. A primary polymeric layer was prepared by casting and drying of solutions of film-forming polymers, such as polyvinylpyrrolidone (PVP) or polyvinylalcohol (PVA), added with different weight ratios of gelatin (GEL) or chitosan (CH). In order to achieve unidirectional drug delivery towards buccal mucosa, a secondary ethylcellulose layer was applied onto the primary layer. Bilayered films were characterized for their physico-chemical (morphology, thickness, drug content and solid state) and functional (water uptake, mucoadhesion, drug release and permeation) properties. The inclusion of CH into PVP and PVA primary layer provided the best mucoadhesion ability. Films containing CH provided a lower drug release with respect to films containing GEL and increased the amount of permeated drug through buccal mucosa, thanks to its ability of interfering with the lipid organization. The secondary ethylcellulose layer did not interfere with drug permeation, but it could limit drug release in the buccal cavity. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Sensitive spectrophotometric determination of metoclopramide hydrochloride in dosage forms and spiked human urine using vanillin

    Directory of Open Access Journals (Sweden)

    O. Zenita Devi

    2016-09-01

    Full Text Available A new spectrophotometric method which is simple, sensitive, selective and rapid is described for the determination of metoclopramide hydrochloride (MCP in bulk drug and in dosage forms using vanillin as the chromogenic agent. The method is based on the condensation reaction between primary aromatic amine group present in MCP with aromatic aldehyde, vanillin to produce an intense yellow colored product. The resulting Schiff’s base shows an absorption maximum at 410 nm and the reaction product is stable for more than one day. The reaction was carried out in acetic acid and perchloric acid medium. Beer’s law was obeyed in the concentration range 1.5–15.0 μg ml−1 MCP with a molar absorptivity of 1.89 × 104 l mol−1 cm−1. The limit of detection (LOD and limit of quantification (LOQ were found to be 0.51 and 1.55 μg ml−1, respectively. The method was statistically evaluated by calculating percent relative error (% RE for accuracy and percent relative standard deviation (% RSD for precision, and was applied successfully to the determination of MCP in tablets, in injection and also in spiked human urine. No interference was observed from common additives found in pharmaceutical preparations. The results obtained by the proposed method were validated statistically by comparing the results with those of the reference method by applying the Student’s t-test and F-test. The accuracy and reliability of the method were further ascertained by performing recovery tests via standard-addition technique.

  17. Cathodic adsorptive stripping voltammetric determination of Ribavirin in pharmaceutical dosage form, urine and serum

    Directory of Open Access Journals (Sweden)

    Ahmed A. Abdel Gaber

    2017-05-01

    Full Text Available A sensitive, simple and rapid square-wave adsorptive stripping voltammetric method was developed and validated for the determination of Ribavirin in pharmaceutical formulations. The proposed method was based on the electrochemical reduction of Ribavirin at a hanging mercury drop electrode in Britton Robinson buffer at pH 10. A well-defined peak was observed at 880 mV with 30 s of accumulation time and 50 mV of accumulation potential. Under these optimized conditions, the square-wave adsorptive stripping voltammetric peak current showed a linear correlation on drug concentration over the range of 1 × 10−10–2 × 10−7 mol L−1 with a correlation coefficient of 0.9995 for the proposed method. The detection and quantitation limits for this method were 2.02 × 10−10 and 6.80 × 10−10 mol L−1, respectively. The results obtained for intra-day and inter-day precision (as RSD % were between 0.447% and 1.024%. This method was applied successfully for the determination of Ribavirin in its pharmaceutical dosage forms with mean recoveries of 99.68 ± 0.13 with RSD % of 0.81% and 99.20 ± 0.24 with RSD % of 0.49% for two concentrations 5 × 10−9 and 5 × 10−8 mol L−1, respectively for 200 mg capsules. The results obtained from the developed square-wave adsorptive stripping voltammetric method were compared with those obtained by the analytical method reported in the literature.

  18. Development of theophylline sustained release dosage form based on Kollidon SR.

    Science.gov (United States)

    Reza, Md Selim; Quadir, Mohiuddin Abdul; Haider, Syed Shabbir

    2002-01-01

    Sustained release theophylline matrix tablets constituting Kollidon SR (Polyvinyl acetate and povidone based matrix retarding polymer) were developed in this study in an attempt to design a dosage form that manifests desirable release profile and thorough adherence to official monographs. Four matrix tablet formulations were prepared by dry blending and direct compression of Kollidon SR and HPMC-15cps (hydroxypropylmethylcellulose) in varying proportion with fixed percentage of theophylline. Tablets containing only Kollidon SR with the active ingredient demonstrated a rapid rate of drug release with an initial burst effect. Incorporation of HPMC-15cps in the matrix tablet prolonged the release of drug with subsequent minimization of burst effect as confirmed by mean dissolution time, T50 and Higuchi release rate data. Among the batches containing HPMC-15 cps, a direct relationship was obtained between release rate and the percentage of HPMC used. A suitable controlled release profile was obtained with the matrix tablets containing 20% Kollidon SR and 30% HPMC-15cps. The formulation showed close resemblance to commercial products and compliance with USP specification. The results were explored and explained by the difference of physico-chemical property and hydration characteristics of the polymers. In addition to this result, the exponential model was applied to characterize the drug release behaviour from polymeric systems. It was found that, Fickian release is predominant in tablets containing Kollidon SR alone and non-Fickian mechanism plays an important role in the release of drug from HPMC containing tablets with a trend towards zero-order or case II release. In vitro release profile of two commercial brands were also undertaken for comparison and modulation of the experimental batches.

  19. Development of alternative methods for the determination of raloxifene hydrochloride in tablet dosage form

    Directory of Open Access Journals (Sweden)

    Fernanda Rodrigues Salazar

    2015-06-01

    Full Text Available Three methods are proposed for the quantitative determination of raloxifene hydrochloride in pharmaceutical dosage form: ultraviolet method (UV high performance liquid chromatography (HPLC and micellar capillary electrophoresis (MEKC. These methods were developed and validated and showed good linearity, precision and accuracy. Also they demonstrated to be specific and robust. The HPLC and MEKC methods were tested in regards to be stability indicating methods and they showed to have this attribute. The UV method used methanol as solvent and optimal wavelength at 284 nm, obeying Lambert-Beer law in these conditions. The chromatographic conditions for the HPLC method included: NST column C18 (250 x 4.6 mm x 5 µm, mobile phase water:acetonitrile:triethylamine (67:33:0,3 v/v, pH 3.5, flow rate 1.0 mL min-1, injection volume 20.0 µl, UV detection 287 nm and analysis temperature 30 °C. The MEKC method was performed on a fused-silica capillary (40 cm effective length x 50 µm i.d. using as background electrolyte 35.0 mmol L-1 borate buffer and 50.0 mmol L-1 anionic detergent sodium dodecyl sulfate (SDS at pH 8.8. The capillary temperature was 32°C, applied voltage 25 kV, UV detection at 280 nm and injection was perfomed at 45 mBar for 4 s, hydrodimanic mode. In this MEKC method, potassium diclofenac (200.0 µg mL-1 was used as internal standard. All these methods were statistically analyzed and demonstrated to be equivalent for quantitative analysis of RLX in tablets and were successfully applied for the determination of the drug.

  20. Stability of Dosage Forms in the Pharmaceutical Payload Aboard Space Missions

    Science.gov (United States)

    Du, Brian J.; Daniels, Vernie; Boyd, Jason L.; Crady, Camille; Satterfield, Rick; Younker, Diane R.; Putcha, Lakshmi

    2009-01-01

    Efficacious pharmaceuticals with adequate shelf lives are essential for successful space medical operations. Stability of pharmaceuticals, therefore, is of paramount importance for assuring the health and wellness of astronauts on future space exploration missions. Unique physical and environmental factors of space missions may contribute to the instability of pharmaceuticals, e.g., radiation, humidity and temperature variations. Degradation of pharmaceutical formulations can result in inadequate efficacy and/or untoward toxic effects, which could compromise astronaut safety and health. Methods: Four identical pharmaceutical payload kits containing 31 medications in different dosage forms (liquid, tablet, capsule, ointment and suppository) were transported to the International Space Station aboard the Space Shuttle (STS-121). One of the 4 kits was stored on the Shuttle and the other 3 were stored on the International Space Station (ISS) for return to Earth at 6-month interval aboard a pre-designated Shuttle flight for each kit. The kit stored on the Shuttle was returned to Earth aboard STS-121 and 2 kits from ISS were returned on STS 117 and STS-122. Results: Analysis of standard physical and chemical parameters of degradation was completed for pharmaceuticals returned by STS-121 after14 days, STS - 117 after11 months and STS 122 after 19 months storage aboard ISS. Analysis of all flight samples along with ground-based matching controls was completed and results were compiled. Conclusion: Evaluation of results from the shuttle (1) and ISS increments (2) indicate that the number of formulations degraded in space increased with duration of storage in space and was higher in space compared to their ground-based counterparts. Rate of degradation for some of the formulations tested was faster in space than on Earth. Additionally, some of the formulations included in the medical kits were unstable, more so in space than on the ground. These results indicate that the

  1. 75 FR 20268 - Implantation or Injectable Dosage Form New Animal Drugs; Change of Sponsor; Propofol

    Science.gov (United States)

    2010-04-19

    ... 21 CFR Part 522 Animal drugs. Therefore, under the Federal Food, Drug, and Cosmetic Act and under... use in dogs and cats--(1) Amount. The drug is administered by intravenous injection as follows: (i) Dogs. For induction of general anesthesia without the use of preanesthetics the dosage is 5.5 to 7.0 mg...

  2. New Spectrophotometric and Conductometric Methods for Macrolide Antibiotics Determination in Pure and Pharmaceutical Dosage Forms Using Rose Bengal

    Directory of Open Access Journals (Sweden)

    Rania A. Sayed

    2013-01-01

    Full Text Available Two Simple, accurate, precise, and rapid spectrophotometric and conductometric methods were developed for the estimation of erythromycin thiocyanate (I, clarithromycin (II, and azithromycin dihydrate (III in both pure and pharmaceutical dosage forms. The spectrophotometric procedure depends on the reaction of rose bengal and copper with the cited drugs to form stable ternary complexes which are extractable with methylene chloride, and the absorbances were measured at 558, 557, and 560 nm for (I, (II, and (III, respectively. The conductometric method depends on the formation of an ion-pair complex between the studied drug and rose bengal. For the spectrophotometric method, Beer's law was obeyed. The correlation coefficient ( for the studied drugs was found to be 0.9999. The molar absorptivity (, Sandell’s sensitivity, limit of detection (LOD, and limit of quantification (LOQ were also calculated. The proposed methods were successfully applied for the determination of certain pharmaceutical dosage forms containing the studied drugs

  3. Spectrophotometric methods for the simultaneous estimation of ofloxacin and tinidazole in bulk and pharmaceutical dosage form

    Directory of Open Access Journals (Sweden)

    Kareti Srinivasa Rao

    2011-01-01

    Full Text Available Aim: This work deals with the simultaneous estimation of Ofloxacin (OFL and Tinidazole (TNZ in in bulk and pharmaceutical dosage form, without prior separation, by three different techniques (Simultaneous equation, Absorbance ratio method and First order derivative method. Materials and Methods: The present work was carried out on Shimadzu electron UV1800 double beam UV-Visible spectrophotometer. The absorption spectra of reference and test solutions were carried out in 1 cm matched quartz cell over the range of 200 - 400 nm. Standard gift sample of OFL and TNZ obtain from Torrent pharmaceuticals Ltd., Baddi, Himachal Pradesh. Combined OFL and TNZ tablets were purchased from local market. Methanol from Merck Ltd and distilled water are used as solvent. Results: The first method is the application of simultaneous equation. Where the linearity ranges for OFL and TNZ were 5-30 μg/ml and 10-50 μg/ml respectively. The second method is the determination of ratio of absorbance at 278nm, the maximum absorption of TNZ and isobestic wavelength 283 nm, the linearity ranges for OFL and TNZ were 5-30 μg/ml and 10-50μg/ml respectively. The third method is the first order derivative method, where the linearity ranges for OFL and TNZ were 5-30 μg/ml and 10-50 μg/ml respectively. The results of the analysis have been validated statistically and by recovery studies, where the percentage recovery was found to be 100.9±0.49 and 97.30±0.20 using the simultaneous equation method, 98±0.45 and 100.4±0.48 using the graphical absorbance ratio method and 99.10±0.40 and 84.70±0.70 using first derivative method, for OFL and TNZ respectively. Conclusions: The proposed procedures are rapid, simple, require no preliminary separation steps and can be used for routine analysis of both drugs in quality control laboratories.

  4. Micropellets coated with Kollicoat® Smartseal 30D for taste masking in liquid oral dosage forms.

    Science.gov (United States)

    Dashevskiy, Andriy; Mohylyuk, Valentyn; Ahmed, Abid Riaz; Kolter, Karl; Guth, Felicitas; Bodmeier, Roland

    2017-09-01

    The objective of this study was to develop delivery systems for taste masking based on multiparticulates coated with Kollicoat ® Smartseal 30D formulated as liquid oral suspensions. Coating of particles containing bitter drugs with Kollicoat ® Smartseal reduced drug leaching into aqueous medium, especially when increasing pH, therefore can be used for the formulation of liquid dosage forms. Application of an intermediate layer of ion exchange resins between drug layer and coating can further decrease drug leaching into aqueous vehicle that is beneficial in terms of taste masking. Using optimized compositions of liquid vehicles such as addition of sugar alcohols and ion exchange resin, reconstitutable or ready-to-use liquid dosage forms with micropellets can be developed with bitter taste protection after redispersion lasting longer than 3 weeks, which exceeds the usual period of application.

  5. Laūq: A Sustained-Release Dosage Form for Respiratory Disorders in Traditional Persian Medicine.

    Science.gov (United States)

    Karegar-Borzi, Hossein; Salehi, Mehdi; Rahimi, Roja

    2016-01-01

    Laūq is a pharmaceutical dosage form that had been mainly used for the treatment of various respiratory disorders in traditional Persian medicine. It is important from 2 aspects: a dosage form with efficient and optimum delivery of drugs to the respiratory tract and biological effects of its ingredients. Natural medicine in laūq has been demonstrated to act in respiratory disorders by their antitussive, antiallergic, anti-inflammatory, antioxidant, spasmolytic, and antibacterial activities. Some of these natural remedies act by most of the mentioned mechanisms such as Cydonia oblonga, Glycyrrhiza glabra, Crocus sativus, Hyssopus officinalis, Foeniculum vulgare, and honey. However, the evidence is limited including Cassia fistula, Papaver somniferum, and Drimia maritima. According to positive pharmacokinetic and pharmacodynamic aspects of laūqs, they may be considered as efficient dosage forms for delivery of drugs to the respiratory tract. For better compatibility of patients, it could be substituted laūqs with newer drug delivery systems like lozenges. © The Author(s) 2015.

  6. Effect of low-molecular-weight beta-cyclodextrin polymer on release of drugs from mucoadhesive buccal film dosage forms.

    Science.gov (United States)

    Arakawa, Yotaro; Kawakami, Shigeru; Yamashita, Fumiyoshi; Hashida, Mitsuru

    2005-09-01

    We investigated the effect of low-molecular-weight beta-cyclodextrin (beta-CyD) polymer on in vitro release of two drugs with different lipophilicities (i.e., lidocaine and ketoprofen) from mucoadhesive buccal film dosage forms. When beta-CyD polymer was added to hydroxypropylcellulose (HPC) or polyvinylalcohol (PVA) film dosage forms, the release of lidocaine into artificial saliva (pH 5.7) was reduced by 40% of the control. In contrast, the release of ketoprofen from the polymer film was enhanced by addition of beta-CyD polymer to the vehicle. When lidocaine and ketoprofen was incubated with beta-CyD polymer in the artificial saliva, concentration of free lidocaine molecules decreased in a beta-CyD polymer concentration-dependent manner. The association constant with beta-CyD polymer was 6.9+/-0.6 and 520+/-90 M(-1) for lidocaine and ketoprofen, respectively. Retarded release of the hydrophilic lidocaine by beta-CyD polymer might be due to the decrease in thermodynamic activity by inclusion complex formation, whereas enhanced release of the lipophilic ketoprofen by the beta-CyD polymer might be due to prevention of recrystallization occurring after contacting the film with aqueous solution. Thus, effects of low-molecular-weight beta-CyD polymer to the drug release rate from film dosage forms would vary according to the strength of interaction with and the solubility of active ingredient.

  7. GC Method Validation for the Analysis of Menthol in Suppository Pharmaceutical Dosage Form

    Directory of Open Access Journals (Sweden)

    Murad N. Abualhasan

    2017-01-01

    Full Text Available Menthol is widely used as a fragrance and flavor in the food and cosmetic industries. It is also used in the medical and pharmaceutical fields for its various biological effects. Gas chromatography (GC is considered to be a sensitive method for the analysis of menthol. GC chromatographic separation was developed using capillary column (VF-624 and a flame ionization detector (FID. The method was validated as per ICH guidelines for various parameters such as precision, linearity, accuracy, solution stability, robustness, limit of detection, and quantification. The tested validation parameters were found to be within acceptable limits. The method was successfully applied for the quantification of menthol in suppositories formulations. Quality control departments and official pharmacopeias can use our developed method in the analysis of menthol in pharmaceutical dosage formulation and raw material.

  8. Simultaneous in vivo visualization and localization of solid oral dosage forms in the rat gastrointestinal tract by magnetic resonance imaging (MRI).

    Science.gov (United States)

    Christmann, V; Rosenberg, J; Seega, J; Lehr, C M

    1997-08-01

    Bioavailability of orally administered drugs is much influenced by the behavior, performance and fate of the dosage form within the gastrointestinal (GI) tract. Therefore, MRI in vivo methods that allow for the simultaneous visualization of solid oral dosage forms and anatomical structures of the GI tract have been investigated. Oral contrast agents containing Gd-DTPA were used to depict the lumen of the digestive organs. Solid oral dosage forms were visualized in a rat model by a 1H-MRI double contrast technique (magnetite-labelled microtablets) and a combination of 1H- and 19F-MRI (fluorine-labelled minicapsules). Simultaneous visualization of solid oral dosage forms and the GI environment in the rat was possible using MRI. Microtablets could reproducibly be monitored in the rat stomach and in the intestines using a 1H-MRI double contrast technique. Fluorine-labelled minicapsules were detectable in the rat stomach by a combination of 1H- and 19F-MRI in vivo. The in vivo 1H-MRI double contrast technique described allows solid oral dosage forms in the rat GI tract to be depicted. Solid dosage forms can easily be labelled by incorporating trace amounts of non-toxic iron oxide (magnetite) particles. 1H-MRI is a promising tool for observing such pharmaceutical dosage forms in humans. Combined 1H- and 19F-MRI offer a means of unambiguously localizing solid oral dosage forms in more distal parts of the GI tract. Studies correlating MRI examinations with drug plasma levels could provide valuable information for the development of pharmaceutical dosage forms.

  9. Development and validation of a dissolution test with reversed-phase liquid chromatography analysis for rupatadine in tablet dosage forms

    Directory of Open Access Journals (Sweden)

    Sérgio Luiz Dalmora

    2010-01-01

    Full Text Available A dissolution test for in vitro evaluation of tablet dosage forms containing 10 mg of rupatadine was developed and validated by RP-LC. A discriminatory dissolution method was established using apparatus paddle at a stirring rate of 50 rpm with 900 mL of deaerated 0.01 M hydrochloric acid. The proposed method was validated yielding acceptable results for the parameters evaluated, and was applied for the quality control analysis of rupatadine tablets, and to evaluate the formulation during an accelerated stability study. Moreover, quantitative analyses were also performed, to compare the applicability of the RP-LC and the LC-MS/MS methods.

  10. New Stability Indicating RP-HPLC Method for the Estimation of Cefpirome Sulphate in Bulk and Pharmaceutical Dosage Forms

    OpenAIRE

    Rao, Kareti Srinivasa; Kumar, Keshar Nargesh; Joydeep, Datta

    2011-01-01

    A simple stability indicating reversed-phase HPLC method was developed and subsequently validated for estimation of Cefpirome sulphate (CPS) present in pharmaceutical dosage forms. The proposed RP-HPLC method utilizes a LiChroCART-Lichrosphere100, C18 RP column (250 mm ? 4mm ? 5 ?m) in an isocratic separation mode with mobile phase consisting of methanol and water in the proportion of 50:50 % (v/v), at a flow rate 1ml/min, and the effluent was monitored at 270 nm. The retention time of CPS wa...

  11. Simple and Inexpensive Methods Development for Determination of Venlafaxine Hydrochloride from Its Solid Dosage Forms by Visible Spectrophotometry

    Directory of Open Access Journals (Sweden)

    K. Raghubabu

    2012-01-01

    Full Text Available Two simple, sensitive and cost effective visible spectrophotometric methods (M1 and M2 have been developed for the determination of venlafaxine hydrochloride from bulk and tablet dosage forms. The method M1 is based on the formation of green colored coordination complex by the drug with cobalt thiocyanate which is quantitatively extractable into nitro benzene with an absorption maximum of 626.4 nm. The method M2 involves internal salt formation of aconitic anhydride, dehydration product of citric acid [CIA] with acetic anhydride [Ac2O] to form colored chromogen with an absorption maximum of 561.2 nm. The calibration graph is linear over the concentration range of 10-50 µg/mL and 8-24 µg/mL for method M1 and M2 respectively. The proposed methods are applied to commercial available tablets and the results are statistically compared with those obtained by the reference method and validated by recovery studies. The results are found satisfactory and reproducible. These methods are applied successfully for the estimation of the venlafaxine hydrochloride in the presence of other ingredients that are usually present in dosage forms.

  12. Spectrophotometric methods for the determination of benazepril hydrochloride in its single and multi-component dosage forms.

    Science.gov (United States)

    El-Yazbi, F A; Abdine, H H; Shaalan, R A

    1999-06-01

    Three sensitive and accurate methods are presented for the determination of benazepril in its dosage forms. The first method uses derivative spectrophotometry to resolve the interference due to formulation matrix. The second method depends on the color formed by the reaction of the drug with bromocresol green (BCG). The third one utilizes the reaction of benazepril, after alkaline hydrolysis, with 3-methylbenzothialozone (MBTH) hydrazone where the produced color is measured at 593 nm. The latter method was extended to develop a stability-indicating method for this drug. Moreover, the derivative method was applied for the determination of benazepril in its combination with hydrochlorothiazide. The proposed methods were applied for the analysis of benazepril in the pure form and in tablets. The coefficient of variation was less than 2%.

  13. Development and Validation of RP-HPLC Method for Simultaneous Estimation of Aspirin and Esomeprazole Magnesium in Tablet Dosage Form

    Directory of Open Access Journals (Sweden)

    Dipali Patel

    2013-01-01

    Full Text Available A simple, specific, precise, and accurate reversed-phase HPLC method was developed and validated for simultaneous estimation of aspirin and esomeprazole magnesium in tablet dosage forms. The separation was achieved by HyperChrom ODS-BP C18 column (200 mm × 4.6 mm; 5.0 μm using acetonitrile: methanol: 0.05 M phosphate buffer at pH 3 adjusted with orthophosphoric acid (25 : 25 : 50, v/v as eluent, at a flow rate of 1 mL/min. Detection was carried out at wavelength 230 nm. The retention times of aspirin and esomeprazole magnesium were 4.29 min and 6.09 min, respectively. The linearity was established over the concentration ranges of 10–70 μg/mL and 10–30 μg/mL with correlation coefficients (r2 0.9986 and 0.9973 for aspirin and esomeprazole magnesium, respectively. The mean recoveries were found to be in the ranges of 99.80–100.57% and 99.70–100.83% for aspirin and esomeprazole magnesium, respectively. The proposed method has been validated as per ICH guidelines and successfully applied to the estimation of aspirin and esomeprazole magnesium in their combined tablet dosage form.

  14. Overview of PAT process analysers applicable in monitoring of film coating unit operations for manufacturing of solid oral dosage forms.

    Science.gov (United States)

    Korasa, Klemen; Vrečer, Franc

    2018-01-01

    Over the last two decades, regulatory agencies have demanded better understanding of pharmaceutical products and processes by implementing new technological approaches, such as process analytical technology (PAT). Process analysers present a key PAT tool, which enables effective process monitoring, and thus improved process control of medicinal product manufacturing. Process analysers applicable in pharmaceutical coating unit operations are comprehensibly described in the present article. The review is focused on monitoring of solid oral dosage forms during film coating in two most commonly used coating systems, i.e. pan and fluid bed coaters. Brief theoretical background and critical overview of process analysers used for real-time or near real-time (in-, on-, at- line) monitoring of critical quality attributes of film coated dosage forms are presented. Besides well recognized spectroscopic methods (NIR and Raman spectroscopy), other techniques, which have made a significant breakthrough in recent years, are discussed (terahertz pulsed imaging (TPI), chord length distribution (CLD) analysis, and image analysis). Last part of the review is dedicated to novel techniques with high potential to become valuable PAT tools in the future (optical coherence tomography (OCT), acoustic emission (AE), microwave resonance (MR), and laser induced breakdown spectroscopy (LIBS)). Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Development and Validation of Spectrophotometric Methods for Simultaneous Estimation of Valsartan and Hydrochlorothiazide in Tablet Dosage Form

    Directory of Open Access Journals (Sweden)

    Monika L. Jadhav

    2014-01-01

    Full Text Available Two UV-spectrophotometric methods have been developed and validated for simultaneous estimation of valsartan and hydrochlorothiazide in a tablet dosage form. The first method employed solving of simultaneous equations based on the measurement of absorbance at two wavelengths, 249.4 nm and 272.6 nm, λmax for valsartan and hydrochlorothiazide, respectively. The second method was absorbance ratio method, which involves formation of Q-absorbance equation at 258.4 nm (isoabsorptive point and also at 272.6 nm (λmax of hydrochlorothiazide. The methods were found to be linear between the range of 5–30 µg/mL for valsartan and 4–24 μg/mL for hydrochlorothiazide using 0.1 N NaOH as solvent. The mean percentage recovery was found to be 100.20% and 100.19% for the simultaneous equation method and 98.56% and 97.96% for the absorbance ratio method, for valsartan and hydrochlorothiazide, respectively, at three different levels of standard additions. The precision (intraday, interday of methods was found within limits (RSD<2%. It could be concluded from the results obtained in the present investigation that the two methods for simultaneous estimation of valsartan and hydrochlorothiazide in tablet dosage form are simple, rapid, accurate, precise and economical and can be used, successfully, in the quality control of pharmaceutical formulations and other routine laboratory analysis.

  16. Alternative Manufacturing Concepts for Solid Oral Dosage Forms From Drug Nanosuspensions Using Fluid Dispensing and Forced Drying Technology.

    Science.gov (United States)

    Bonhoeffer, Bastian; Kwade, Arno; Juhnke, Michael

    2018-03-01

    Flexible manufacturing technologies for solid oral dosage forms with a continuous adjustability of the manufactured dose strength are of interest for applications in personalized medicine. This study explored the feasibility of using microvalve technology for the manufacturing of different solid oral dosage form concepts. Hard gelatin capsules filled with excipients, placebo tablets, and polymer films, placed in hard gelatin capsules after drying, were considered as substrates. For each concept, a basic understanding of relevant formulation parameters and their impact on dissolution behavior has been established. Suitable matrix formers, present either on the substrate or directly in the drug nanosuspension, proved to be essential to prevent nanoparticle agglomeration of the drug nanoparticles and to ensure a fast dissolution behavior. Furthermore, convection and radiation drying methods were investigated for the fast drying of drug nanosuspensions dispensed onto polymer films, which were then placed in hard gelatin capsules. Changes in morphology and in drug and matrix former distribution were observed for increasing drying intensity. However, even fast drying times below 1 min could be realized, while maintaining the nanoparticulate drug structure and a good dissolution behavior. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  17. High performance liquid chromatography for simultaneous determination of xipamide, triamterene and hydrochlorothiazide in bulk drug samples and dosage forms.

    Science.gov (United States)

    Abd El-Hay, Soad S; Hashem, Hisham; Gouda, Ayman A

    2016-03-01

    A novel, simple and robust high-performance liquid chromatography (HPLC) method was developed and validated for simultaneous determination of xipamide (XIP), triamterene (TRI) and hydrochlorothiazide (HCT) in their bulk powders and dosage forms. Chromatographic separation was carried out in less than two minutes. The separation was performed on a RP C-18 stationary phase with an isocratic elution system consisting of 0.03 mol L(-1) orthophosphoric acid (pH 2.3) and acetonitrile (ACN) as the mobile phase in the ratio of 50:50, at 2.0 mL min(-1) flow rate at room temperature. Detection was performed at 220 nm. Validation was performed concerning system suitability, limits of detection and quantitation, accuracy, precision, linearity and robustness. Calibration curves were rectilinear over the range of 0.195-100 μg mL(-1) for all the drugs studied. Recovery values were 99.9, 99.6 and 99.0 % for XIP, TRI and HCT, respectively. The method was applied to simultaneous determination of the studied analytes in their pharmaceutical dosage forms.

  18. Geometry of modified release formulations during dissolution--influence on performance of dosage forms with diclofenac sodium.

    Science.gov (United States)

    Dorożyński, Przemysław; Kulinowski, Piotr; Jamróz, Witold; Juszczyk, Ewelina

    2014-12-30

    The objectives of the work included: presentation of magnetic resonance imaging (MRI) and fractal analysis based approach to comparison of dosage forms of different composition, structure, and assessment of the influence of the compositional factors i.e., matrix type, excipients etc., on properties and performance of the dosage form during drug dissolution. The work presents the first attempt to compare MRI data obtained for tablet formulations of different composition and characterized by distinct differences in hydration and drug dissolution mechanisms. The main difficulty, in such a case stems from differences in hydration behavior and tablet's geometry i.e., swelling, cracking, capping etc. A novel approach to characterization of matrix systems i.e., quantification of changes of geometrical complexity of the matrix shape during drug dissolution has been developed. Using three chosen commercial modified release tablet formulations with diclofenac sodium we present the method of parameterization of their geometrical complexity on the base of fractal analysis. The main result of the study is the correlation between the hydrating tablet behavior and drug dissolution - the increase of geometrical complexity expressed as fractal dimension relates to the increased variability of drug dissolution results. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Development and Validation of UV Spectrophotometric Method For Determination of Bisoprolol Fumarate in Bulk and Pharmaceutical Dosage Forms

    Directory of Open Access Journals (Sweden)

    Shahinaz Mohammed

    2017-10-01

    Full Text Available In this study a simple, accurate and precise UV- spectrophotometric method was developed for the estimation of bisoprolol fumarate (BF in bulk and tablet dosage form. The method was based on measurement of absorbance of BF aqueous solution at 225 nm. Validation was conducted in accordance to ICH guidelines. The calibration curve was linear in the concentration range 5.0-30.0 µg/mL with correlation coefficient not less than 0.996. The limit of detection and limit of quantification were 0.22 μg/ml and 0.66 μg/ml, respectively. Intraday and intermediate precision of the developed method were reflected by the low RSD% values (1.19 and 0.854, respectively. The recovery percentage was 100.6 ± 0.6%, n=3. The proposed method was applied for the assay of BF in three different brands.

  20. Development of polymer film dosage forms of lidocaine for buccal administration. I. Penetration rate and release rate.

    Science.gov (United States)

    Okamoto, H; Taguchi, H; Iida, K; Danjo, K

    2001-12-13

    We examined the penetration rate of lidocaine (LC) through excised oral mucosa from hamster cheek pouch and the in vitro release rate of LC from film dosage forms with hydroxypropylcellulose (HPC) as a film base. Addition of glycyrrhizic acid (GL) to the HPC films increased the LC release rate almost GL-content-dependently, while an optimum GL content was observed for the LC penetration rate. No LC penetration was observed from an acidic aqueous solution (pH 3.4) of LC, suggesting only unionized LC can substantially penetrate through the mucosa. A significant relationship between the penetration rate of LC and the release rate of unionized LC was found, suggesting that the in vitro dissolution study is a useful tool to predict the penetration rate taking the unionized drug fraction into consideration.

  1. Simultaneous Estimation and Validation of Atorvastatin Calcium and Aspirin in Combined Capsule Dosage Form by RP HPLC Method

    Directory of Open Access Journals (Sweden)

    B. V. Suma

    2012-01-01

    Full Text Available A new simple, specific, precise and accurate revere phase liquid chromatography method has been developed for estimation of atorvastatin calcium (AST and ASPIRIN (ASP simultaneously in a combined capsule dosage forms. The chromatographic separation was achieved on a 5 – micron C 18 column (250x 4.6mm using a mobile phase consisting of a mixture of Acetonitrile: Ammonium Acetate buffer 0.02M (68:32 pH 4.5. The flow rate was maintained at 0.8 ml/min. The detection of the constituents was done using UV detector at 245 nm for AST and ASP. The retention time of AST and ASP were found be 4.5915 ± 0.0031 min and 3.282 ±0.0024 min respectively. The developed method was validated for accuracy, linearity, precision, limit of detection (LOD and limit of quantification (LOQ and robustness as per the ICH guidelines.

  2. Determination of glibenclamide, metformin hydrochloride and rosiglitazone maleate by reversed phase liquid chromatographic technique in tablet dosage form

    Directory of Open Access Journals (Sweden)

    Havele Shweta S.

    2014-01-01

    Full Text Available A simple, precise and accurate high performance liquid chromatography (HPLC method was developed for the simultaneous estimation of metformin hydrochloride, rosiglitazone maleate, glibenclamide present in multicomponent dosage forms. Chromatography was performed on a 25 cm × 4.6 mm i.d., 5-μm particle, C18 column with 78:22 (v/v methanol: 20 mM potassium dihydrogen phosphate buffer as mobile phase at a flow rate of 1.0 ml/min and UV detection at 238 nm for metformin hydrochloride, rosiglitazone maleate, and glibenclamide. The total elution time was shorter than 9 min. This method was found to be precise and reproducible. This proposed method was successfully applied for the analysis of metformin hydrochloride, rosiglitazone maleate, glibenclamide as a bulk drug and in pharmaceutical formulation without any interference from the excipients.

  3. Toward Higher QA: From Parametric Release of Sterile Parenteral Products to PAT for Other Pharmaceutical Dosage Forms.

    Science.gov (United States)

    Hock, Sia Chong; Constance, Neo Xue Rui; Wah, Chan Lai

    2012-01-01

    Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most ideal approach for determining the pharmaceutical quality of the finished dosage form. In the case of terminally sterilized parenteral products, the limitations of conventional batch testing have been successfully addressed with the application of parametric release (the release of a product based on control of process parameters instead of batch sterility testing at the end of the manufacturing process). Consequently, there has been an increasing interest in applying parametric release to other pharmaceutical dosage forms, beyond terminally sterilized parenteral products. For parametric release to be possible, manufacturers must be capable of designing quality into the product, monitoring the manufacturing processes, and controlling the quality of intermediates and finished products in real-time. Process analytical technology (PAT) has been thought to be capable of contributing to these prerequisites. It is believed that the appropriate use of PAT tools can eventually lead to the possibility of real-time release of other pharmaceutical dosage forms, by-passing the need for end-product batch testing. Hence, this literature review attempts to present the basic principles of PAT, introduce the various PAT tools that are currently available, present their recent applications to pharmaceutical processing, and explain the potential benefits that PAT can bring to conventional ways of processing and quality assurance of pharmaceutical products. Last but not least, current regulations governing the use of PAT and the manufacturing challenges associated with PAT implementation are also discussed. Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most

  4. Estimation of Rabeprazole Sodium and Itopride Hydrochloride in Tablet Dosage Form Using Reverse Phase High Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    Shaik Harum Rasheed

    2011-01-01

    Full Text Available A reversed phase high performance liquid chromatography (RP-HPLC method was developed, validated and used for the quantitative determination of rabeprazole sodium (RP and itopride hydrochloride (IH, from its tablet dosage form. Chromatographic separation was performed on a Phenomenex C18 column (250 mm × 4.6 mm, 5 μm, with a mobile phase comprising of a mixture of 50 mM ammonium acetate buffer and methanol (20:80v/v, pH 4.5 adjusted with acetic acid, at a flow rate of 1.3 mL/min with detection at 286 nm. Separation was completed in less than 10 min. As per International Conference on Harmonization (ICH guidelines the method was validated for linearity, accuracy, precision, limit of quantitation and limit of detection. Linearity of RP was found to be in the range of 37.5-375 μg/mL and IH was found to be in the range of 5-50 μg/mL. The correlation coefficients were 0.9997 and 0.9995 for RB and IH respectively. The accuracy of the developed method was found to be 98.6-100.7 for RP and 99.42 -100.81 for IH. The experiment shows the developed method is free from interference of excipients. It indicates the developed RP-HPLC method is simple, linear, precise and accurate and it can be conveniently adopted for the routine quality control analysis of the tablet dosage form.

  5. Attitude and perception of patients and health care practitioners toward oral sustained release dosage forms in Palestine.

    Science.gov (United States)

    Zaid, Abdel Naser

    2010-10-01

    To evaluate the knowledge of health professionals in Palestine regarding the advantages of sustained release dosage forms (SRDFs) over conventional therapy. Data were gathered from a questionnaire that was handed out to community pharmacists, physicians and patients. Pharmaceutical industry decision makers were enrolled in this study. Data were analyzed using the SPSS. Pharmacists (92.9%) and 89.2% of physicians thought that SRDFs improve patient compliance. 81.5% of pharmacists and 77% of physicians were in agreement regarding the capacity of SRDFs to maintain therapeutic activity during night. In this study, 81.5% of pharmacists and 81% of physicians believed that SRDFs provide further advantage with psychiatric patients who forget to take their medications. Pharmacists (63.1%) and only 63.5% of physicians believed that SRDFs yield a time saving for nurses who use SRDFs in hospital. Only 45.3% of physicians and 43.4% of pharmacists thought that SRDFs result in cost saving due to better disease management. Pharmacists (95.2%) and 95.9% of physicians agreed that SRDFs could be the right choice for faith patient's who must take their medication during the month of Ramadan. Pharmacists (66.7%) and 50.7% of physicians recognize that SRDFs may be unsafe if they are improperly formulated. Bad swallowing was also recognized as inconveniences of SRDFs by 67.9% of pharmacists and 57.3% of physicians. Given the above advantages, 75% of patients showed economical problems regarding the cost of the single course therapy of SRDFs and 100% of interviewed patients were enthusiastic about the advantage of SRDFs during Ramadan. The advantages of SRDFs are not completely understood by Palestinian health professionals. Pharmaceutical industries should pay more attention to the development and advertising of SRDFs due to the valuable advantages of these dosage forms.

  6. Physicochemical characterization of berberine chloride: a perspective in the development of a solution dosage form for oral delivery.

    Science.gov (United States)

    Battu, Sunil Kumar; Repka, Michael A; Maddineni, Sindhuri; Chittiboyina, Amar G; Avery, Mitchell A; Majumdar, Soumyajit

    2010-09-01

    The objective of the present research was to evaluate the physicochemical characteristics of berberine chloride and to assess the complexation of drug with 2-hydroxypropyl-β-cyclodextrin (HPβCD), a first step towards solution dosage form development. The parameters such as log P value were determined experimentally and compared with predicted values. The pH-dependent aqueous solubility and stability were investigated following standard protocols at 25°C and 37°C. Drug solubility enhancement was attempted utilizing both surfactants and cyclodextrins (CDs), and the drug/CD complexation was studied employing various techniques such as differential scanning calorimetry, Fourier transform infrared, nuclear magnetic resonance, and scanning electron microscopy. The experimental log P value suggested that the compound is fairly hydrophilic. Berberine chloride was found to be very stable up to 6 months at all pH and temperature conditions tested. Aqueous solubility of the drug was temperature dependent and exhibited highest solubility of 4.05 ± 0.09 mM in phosphate buffer (pH 7.0) at 25°C, demonstrating the effect of buffer salts on drug solubility. Decreased drug solubility was observed with increasing concentrations of ionic surfactants such as sodium lauryl sulfate and cetyl trimethyl ammonium bromide. Phase solubility studies demonstrated the formation of berberine chloride-HPβCD inclusion complex with 1:1 stoichiometry, and the aqueous solubility of the drug improved almost 4.5-fold in the presence of 20% HPβCD. The complexation efficiency values indicated that the drug has at least threefold greater affinity for hydroxypropyl-β-CD compared to randomly methylated-β-CD. The characterization techniques confirmed inclusion complex formation between berberine chloride and HPβCD and demonstrated the feasibility of developing an oral solution dosage form of the drug.

  7. Stability-Indicating RP-HPLC Method for Determination of Guanfacine Hydrochloride in Bulk Drugs and in Pharmaceutical Dosage Form

    Directory of Open Access Journals (Sweden)

    Vinod K. Ahirrao

    2011-04-01

    Full Text Available A novel stability-indicating RP-HPLC method was developed and validated for quantitative determination of guanfacine hydrochloride in bulk drug and in pharmaceutical dosage form. An isocratic, reversed phase HPLC method was developed to separate the drug from the degradation products, using Apollo, C18 (250mm x 4.6mm, 5µm column with mobile phase of 50mM Ammonium acetate (volatile buffer and acetonitrile (65:35, v/v. UV detection has been done at wavelength 220 nm. The guanfacine hydrochloride was subjected to the stress conditions of hydrolysis (acid, base, oxidation, photolysis and thermal degradation. The stressed samples were analyzed by the proposed method. The analyte peak shape was excellent. The described method shows excellent linearity over a range of 30 – 450 µg/mL. The correlation coefficient for guanfacine hydrochloride was 0.999. The limit of detection for Guanfacine hydrochloride is 0.011 µg/mL and the limit of quantification is 0.038 µg/mL respectively.Degradation was observed for guanfacine hydrochloride in base, thermal and in 30% H2O2 conditions. The drug was found to be stable in the other stress conditions attempted. The degradation products were well resolved from main peak. The percentage recovery of guanfacine hydrochloride was ranged from (99.2% to 100.5% in pharmaceutical dosage form. The developed method was validated with respect to the linearity, accuracy (recovery, precision, specificity and robustness. The forced degradation studies prove the stability indicating power of the method.

  8. Potential application of surfactant systems in formulation of dosage forms with slightly soluble substances

    Directory of Open Access Journals (Sweden)

    Ibrić Svetlana R.

    2012-01-01

    Full Text Available In order to achieve fast release of ibuprofen, slightly soluble model substance (0.52104 mol/l, surfactant systems for oral use with different PEG-40 hydrogenated castor oil (C/diethylene glycol monoethyl ether (T ratios were investigated. Comparison between dissolution profiles for ibuprofen from formulated systems and from two commercial products, film tablets and soft capsules, is presented in this paper. Photon correlation spectroscopy has shown that after high dilution with water, surfactant systems were able to form micellar solutions. The size of micelles varies from 14.8 ± 0,075 nm to 16.2 ± 0,021 nm with increasing C/T ratio from 1:2 to 2:1. Although with increasing content of PEG-40 hydrogenated castor oil larger micelles have formed, lower values of polydispersity index indicated that more homogeneous distribution of micelles size was gained. Conductometric analysis has demonstrated that system composing of C/T ratio 2:1, has shown most pronounced interaction between droplets, which can be seen as high rise of electrical conductivity with increasing water content (% (wwater/wtotal in the sample. No significant difference in percolation threshold between formulations with different C/T ratios was observed. Different surfactant systems were adsorbed on magnesium aluminometasilicate, as adsorbent with high specific active surface (≈300 m2/g, in order to investigate potential influence of adsorbent on ibuprofen dissolution rate. Formulated systems, with or without adsorbent were filled in hard gelatin capsules. The dissolution profiles of ibuprofen from different formulations were obtained in 30 minutes by dissolution apparatus with rotating baskets and compared with dissolution profiles of ibuprofen from commercial products. For formulations without adsorbent faster release of ibuprofen in first minutes of dissolution test, showed formulations with C/T ratio 2:1 and 1:1. Magnesium aluminometasilicate, as adsorbent with high specific

  9. Preparation and Characterization of a Gastric Floating Dosage Form of Capecitabine

    Directory of Open Access Journals (Sweden)

    Ehsan Taghizadeh Davoudi

    2013-01-01

    Full Text Available Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT. Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC, carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets’ floating lag time was determined to be 30–200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.

  10. Preparation and characterization of a gastric floating dosage form of capecitabine.

    Science.gov (United States)

    Taghizadeh Davoudi, Ehsan; Ibrahim Noordin, Mohamed; Kadivar, Ali; Kamalidehghan, Behnam; Farjam, Abdoreza Soleimani; Akbari Javar, Hamid

    2013-01-01

    Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT). Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA) for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC), carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets' floating lag time was determined to be 30-200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.

  11. Porosity measurement of solid pharmaceutical dosage forms by gamma-ray transmission

    International Nuclear Information System (INIS)

    Martins de Oliveira, Jose; Andreo Filho, Newton; Vinicius Chaud, Marco; Angiolucci, Tatiana; Aranha, Norberto; Germano Martins, Antonio Cesar

    2010-01-01

    The aim of the present work is the determination of porosity in tablets by using the gamma-ray transmission technique. Tablet dissolution depends on some inherent characteristics of the manufacturing process, such as compression force, tablet volume, density and porosity, nature of excipients, preparation methods and its physical-chemical properties. Porosity is a measure of empty spaces in a material and can be determined by various techniques. In this paper, we propose the use of a gamma-ray transmission technique to obtain the porosity of experimental formulation of tablets. The results of porosity were compared with those obtained by using conventional methodology (density and mercury intrusion). The experimental setup for gamma-ray transmission consists of a gamma-ray source of 241 Am (photons of 59.6 keV and an activity of 3.7x10 9 Bq), an NaI(Tl) scintillation detector, collimators and a standard gamma-ray spectrometry electronics. Our results suggest that the gamma-ray transmission technique is a powerful tool for non-destructive porosity quantification of solid pharmaceutical forms and presents smaller errors than those obtained with conventional methodologies.

  12. Spectrofluorimetric determination of sertraline in dosage forms and human plasma through derivatization with 9-fluorenylmethyl chloroformate

    Directory of Open Access Journals (Sweden)

    Belal Fathalla

    2011-10-01

    Full Text Available Abstract Background Sertraline is primarily used to treat major depression in adult outpatients as well as obsessive-compulsive, panic and social anxiety disorders in both adults and children. A survey of the literature reveals that most of the reported methods are either insufficiently sensitive or tedious and require highly sophisticated and dedicated instrumentation. The proposed method is considered to be specific for determination of SER in presence of its metabolite (deaminated form. Results A sensitive, simple and specific spectrofluorimetric method was developed for the determination of sertraline (SER in pharmaceutical formulations and biological fluids. The method is based on its reaction with 9-fluorenylmethyl chloroformate (FMOC-Cl in borate buffer of pH 8.0 to yield a highly fluorescent derivative peaking at 315 nm after excitation at 265 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The fluorescence concentration plot was rectilinear over the range of 0.05-1.0 μg mL-1 with a lower detection limit of 5.34 × 10-3 μg mL-1 and limit of quantitation of 0.016 μg mL-1. Conclusions The proposed method was successfully applied to the analysis of commercial tablets and the results obtained were in good agreement with those obtained using the reference method. Furthermore, the method was applied for the determination of SER in spiked and real human plasma. The mean % recovery (n = 3 was 94.33 ± 1.53 and 92.00 ± 2.65, respectively. A proposal of the reaction pathway was postulated.

  13. Stability Indicating Reverse Phase HPLC Method for Estimation of Rifampicin and Piperine in Pharmaceutical Dosage Form.

    Science.gov (United States)

    Shah, Umang; Patel, Shraddha; Raval, Manan

    2018-01-01

    High performance liquid chromatography is an integral analytical tool in assessing drug product stability. HPLC methods should be able to separate, detect, and quantify the various drug-related degradants that can form on storage or manufacturing, plus detect any drug-related impurities that may be introduced during synthesis. A simple, economic, selective, precise, and stability-indicating HPLC method has been developed and validated for analysis of Rifampicin (RIFA) and Piperine (PIPE) in bulk drug and in the formulation. Reversed-phase chromatography was performed on a C18 column with Buffer (Potassium Dihydrogen Orthophosphate) pH 6.5 and Acetonitrile, 30:70), (%, v/v), as mobile phase at a flow rate of 1 mL min-1. The detection was performed at 341 nm and sharp peaks were obtained for RIFA and PIPE at retention time of 3.3 ± 0.01 min and 5.9 ± 0.01 min, respectively. The detection limits were found to be 2.385 ng/ml and 0.107 ng/ml and quantification limits were found to be 7.228ng/ml and 0.325ng/ml for RIFA and PIPE, respectively. The method was validated for accuracy, precision, reproducibility, specificity, robustness, and detection and quantification limits, in accordance with ICH guidelines. Stress study was performed on RIFA and PIPE and it was found that these degraded sufficiently in all applied chemical and physical conditions. Thus, the developed RP-HPLC method was found to be suitable for the determination of both the drugs in bulk as well as stability samples of capsule containing various excipients. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  14. An integrated system for dissolution studies and magnetic resonance imaging of controlled release, polymer-based dosage forms-a tool for quantitative assessment of hydrogel formation processes.

    Science.gov (United States)

    Kulinowski, Piotr; Dorozyński, Przemysław; Jachowicz, Renata; Weglarz, Władysław P

    2008-11-04

    Controlled release (CR) dosage forms are often based on polymeric matrices, e.g., sustained-release tablets and capsules. It is crucial to visualise and quantify processes of the hydrogel formation during the standard dissolution study. A method for imaging of CR, polymer-based dosage forms during dissolution study in vitro is presented. Imaging was performed in a non-invasive way by means of the magnetic resonance imaging (MRI). This study was designed to simulate in vivo conditions regarding temperature, volume, state and composition of dissolution media. Two formulations of hydrodynamically balanced systems (HBS) were chosen as model CR dosage forms. HBS release active substance in stomach while floating on the surface of the gastric content. Time evolutions of the diffusion region, hydrogel formation region and "dry core" region were obtained during a dissolution study of L-dopa as a model drug in two simulated gastric fluids (i.e. in fed and fasted state). This method seems to be a very promising tool for examining properties of new formulations of CR, polymer-based dosage forms or for comparison of generic and originator dosage forms before carrying out bioequivalence studies.

  15. Thermal Analysis by Structural Characterization as a Method for Assessing Heterogeneity in Complex Solid Pharmaceutical Dosage Forms.

    Science.gov (United States)

    Alhijjaj, Muqdad; Reading, Mike; Belton, Peter; Qi, Sheng

    2015-11-03

    Characterizing inter- and intrasample heterogeneity of solid and semisolid pharmaceutical products is important both for rational design of dosage forms and subsequent quality control during manufacture; however, most pharmaceutical products are multicomponent formulations that are challenging in this regard. Thermal analysis, in particular differential scanning calorimetry, is commonly used to obtain structural information, such as degree of crystallinity, or identify the presence of a particular polymorph, but the results are an average over the whole sample; it cannot directly provide information about the spatial distribution of phases. This study demonstrates the use of a new thermo-optical technique, thermal analysis by structural characterization (TASC), that can provide spatially resolved information on thermal transitions by applying a novel algorithm to images acquired by hot stage microscopy. We determined that TASC can be a low cost, relatively rapid method of characterizing heterogeneity and other aspects of structure. In the examples studied, it was found that high heating rates enabled screening times of 3-5 min per sample. In addition, this study demonstrated the higher sensitivity of TASC for detecting the metastable form of polyethylene glycol (PEG) compared to conventional differential scanning calorimetry (DSC). This preliminary work suggests that TASC will be a worthwhile additional tool for characterizing a broad range of materials.

  16. Development and Validation of a UV Spectrophotometric and a RP-HPLC Methods for Moexipril Hydrochloride in Pure Form and Pharmaceutical Dosage Form

    International Nuclear Information System (INIS)

    Mastiholimath, V.S.; Gupte, P.P.; Mannur, V.S.

    2012-01-01

    A simple and reliable UV spectrophotometric and high-performance liquid chromatography (HPLC) methods were developed and validated for Moexipril hydrochloride in pure form and pharmaceutical dosage form. The RP-HPLC method was developed on agilant eclipse C 18 , (150 mm x 4.6 mm, 5 μm) with a mobile phase gradient system of 60 % (methanol:acetonitrile (70:30 % v/v)) : 40 % 20 mM ammonium acetate buffer pH 4.5 (v/v) and UV spectrophotometric method was developed in phosphate buffer pH 6.8. The effluent was monitored by SPD-M20A, prominence PDA detector at 210 nm. Calibration curve was linear over the concentration range of 10-35 μg/ml and 1-9 μg/ml for RP-HPLC and UV with a regression coefficient of 0.999. For RP-HPLC method Inter-day and intra-day precision % RSD values were found to be 1.00078 % and 1.49408 % respectively. For UV method 0.73386 % to 1.44111 % for inter day 0.453864 to 1.15542 intra-day precision. Recovery of Moexipril hydrochloride was found to be in the range of 99.8538 % to 101.5614 % and 100.5297586 % to 100.6431587 % for UV and RP-HPLC respectively. The limits of detection (LOD) and quantification (LOQ) for HPLC were 0.98969 and 2.99907 μg/ml, respectively. The developed RP-HPLC and UV spectrophotometric method was successfully applied for the quantitative determination of Moexipril hydrochloride in pharmaceutical dosage. (author)

  17. Utility of Charge Transfer and Ion-Pair Complexation for Spectrophotometric Determination of Eletriptan Hydrobromide in Pure and Dosage Forms

    Directory of Open Access Journals (Sweden)

    Ayman A. Gouda

    2013-01-01

    Full Text Available Three simple, sensitive, and accurate spectrophotometric methods have been developed for the determination of eletriptan hydrobromide (ELT in pure and dosage forms. The first two methods are based on charge transfer complex formation between ELT and chromogenic reagents quinalizarin (Quinz and alizarin red S (ARS producing charge transfer complexes which showed an absorption maximum at 569 and 533 nm for Quinz and ARS, respectively. The third method is based on the formation of ion-pair complex between ELT with molybdenum(V-thiocyanate inorganic complex in hydrochloric acid medium followed by extraction of the colored ion-pair with dichloromethane and measured at 470 nm. Different variables affecting the reactions were studied and optimized. Beer's law is obeyed in the concentration ranges 2.0–18, 1.0–8.0, and 2.0–32 μg mL−1 for Quinz, ARS, and Mo(V-thiocyanate, respectively. The molar absorptivity, Sandell sensitivity, detection, and quantification limits are also calculated. The correlation coefficients were ≥0.9994 with a relative standard deviation (R.S.D%. of ≤0.925. The proposed methods were successfully applied for simultaneous determination of ELT in tablets with good accuracy and precision and without interferences from common additives, and the validity is assessed by applying the standard addition technique, which is compared with those obtained using the reported method.

  18. Separation and determination of impurities in paracetamol, codeine and pitophenone in the presence of fenpiverinium in combined suppository dosage form.

    Science.gov (United States)

    Vojta, Jiří; Hanzlík, Pavel; Jedlička, Aleš; Coufal, Pavel

    2015-01-01

    A new HPLC method for separation and determination of impurities in paracetamol, codeine phosphate hemihydrate and pitophenone hydrochloride in the presence of fenpiverinium bromide in combined suppository dosage form was developed and validated. The separation of paracetamol and its impurities 4-aminophenol, 4-nitrophenol, 4-chloracetanilid; codeine and its impurities methylcodeine, morphine, codeine dimer and 10-hydroxycodeine; pitophenone and its impurities 2-[4-[2-(1-piperidinyl)ethoxy]benzoyl] benzoic acid, 2-[4-[2-(1-piperidinyl)ethoxy]benzoyl]benzoic acid 2-(1-piperidinyl)-ethyl ester, methyl ester of 2-(4-hydroxybenzoyl) benzoic acid and fenpiverinium was achieved by using ion-pair reversed phase liquid chromatography with UV detection. Validation parameters such as the precision, accuracy, linearity, limit of detection (LOD), limit of quantification (LOQ) and robustness were verified for all the mentioned impurities of codeine phosphate hemihydrate and 4-aminophenol and 2-[4-[2-(1-piperidinyl)ethoxy]benzoyl] benzoic acid as the main degradation products of paracetamol and pitophenone hydrochloride, respectively. The described method was found to be useful for analysis of the stability samples and therefore suitable for routine purity testing of the drug product. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Simultaneous Estimation of Ibuprofen and Phenylephrine Hydrochloride in Bulk and Combined Dosage Form by First Derivative UV Spectrophotometry Method

    Directory of Open Access Journals (Sweden)

    Mehul Patel

    2013-01-01

    Full Text Available A simple, precise, rapid, and economic method was developed for the simultaneous determination of Ibuprofen and Phenylephrine HCl in bulk and combined dosage form. This method involves first-order derivative spectroscopy using 248 nm and 237 nm as zero crossing points for Ibuprofen and Phenylephrine HCl, respectively. For spectrophotometric method 0.1 N NaOH was used as a solvent. The linearity was established over the concentration range of 12–72 μg/mL and 1.5–22 μg/mL for Ibuprofen and Phenylephrine HCl with correlation coefficient (r2 of 0.9972 and 0.9981, respectively. The mean % recoveries were found to be in the range of 98.88% and 98.54% for Ibuprofen and Phenylephrine HCl, respectively. Interday and intraday studies showed repeatability of the method. The method was found to be specific and robust. The method was successfully applied to pharmaceutical formulation, with no interference from excipients as indicated by the recovery study. Results of analysis were validated statistically and by recovery studies.

  20. Stability-Indicating Validated HPLC Method for Analysis of Berberine Hydrochloride and Trimethoprim in Pharmaceutical Dosage Form

    Directory of Open Access Journals (Sweden)

    Jing-Chun Wang

    2013-01-01

    Full Text Available A stability-indicating HPLC method was developed and validated for the determination of berberine hydrochloride and trimethoprim in pharmaceutical dosage form in the presence of degradation products. The proposed RP-HPLC method utilizes an Agilent TC-C18, 4.6 mm × 250 mm, 5 μm, column using a mobile phase consisting of acetonitrile-50 mM potassium dihydrogen phosphate (30 : 70, v/v, pH adjusted to 3 with orthophosphoric acid at a flow rate of 1.0 mL/min and UV detection at 271 nm. The linearity of berberine hydrochloride and trimethoprim was in the range of 2 to 60 μg/mL (r=0.9996 and 1 to 30 μg/mL (r=0.9995, respectively. Repeatability and intermediate precisions were also determined with percentage relative standard deviation (% RSD less than 2.0%. The limits of detection were found to be 9.8 ng/mL for berberine hydrochloride and 2.5 ng/mL for trimethoprim. The mean recoveries for berberine hydrochloride and trimethoprim were 99.8 and 98.8%, respectively. The stability of the two drugs was determined under different conditions and the proposed method has shown effective separation for their degradation products. And the proposed assays method can thus be considered stability-indicating.

  1. Spectrophotometric and Spectrofluorimetric Methods for the Determination of Dothiepin Hydrochloride in its Pure and Dosage Forms using Eosin

    Science.gov (United States)

    Walash, M. I.; Belal, F.; El-Enany, N.; Elmansi, H.

    2010-01-01

    Spectrophotometric and spectrofluorimetric methods were developed for the determination of dothiepin hydrochloride (DOP) in different dosage forms. The spectrophotometric method (Method I) is based on formation of a binary complex with eosin at 540 nm in acetate buffer of pH3.7. The absorbance-concentration plot is rectilinear over the range 1–10 μg/mL with LOD of 0.18 μg/mL and LOQ of 0.54 μg/mL. The spectroflurimetric method (Method II) is based on the quantitative quenching effect of Dothiepin on the native fluorescence of eosin at the same pH. The quenching of the fluorescence of eosin was measured at 543 nm after excitation at 304 nm. The fluorescence-concentration plot is rectilinear over the range 0.3–8 μg/ mL with LOD of 0.11 μg/mL and LOQ of 0.34 μg/mL. The proposed methods were successfully applied to the analysis of commercial tablets and capsules containing the drug. Statistical comparison of the results with those of the reference method revealed good agreement and proved that there were no significant differences in the accuracy and precision between the two methods respectively. PMID:23675210

  2. Stability indicating RP-LC-PDA method for the quantitative analysis of saxagliptin in pharmaceutical dosage form

    Directory of Open Access Journals (Sweden)

    Laís Engroff Scheeren

    2015-06-01

    Full Text Available Saxagliptin is a potent and selective inhibitor of the enzyme dipeptidyl peptidase 4. It is effective in the treatment of type 2 diabetes mellitus because it stimulates the pancreas to produce insulin. In the present study, a liquid chromatography method was developed and validated to quantify the drug in tablets. This method was based on the isocratic elution of saxagliptin, using a mobile phase consisting of 0.1% phosphoric acid at pH 3.0 - methanol (70: 30, v/v at a flow rate of 1 mL.min-1 with UV detection at 225 nm. The chromatographic separation was achieved in 8 minutes on a Waters XBridge C18 column (250 mm x 4.6 mm, 5µm maintained at ambient temperature. The proposed method proved to be specific and robust for the quality control of saxagliptin in pharmaceutical dosage forms, showing good linearity in the range of 15.0 - 100.0 µg.mL-1 (r>0.999, precision (RSD

  3. Simultaneous Estimation of Gemcitabine Hydrochloride and Capecitabine Hydrochloride in Combined Tablet Dosage Form by RP-HPLC Method

    Directory of Open Access Journals (Sweden)

    V. Rajesh

    2011-01-01

    Full Text Available A new reverse phase high performance liquid chromatography (RP-HPLC method has been developed for the simultaneous estimation of gemcitabine hydrochloride and capecitabine hydrochloride in combined tablet dosage form. An inertsil ODS-3 C-18 column having dimensions of 250×4.6 mm and particle size of 5 µm, with mobile phase containing a mixture of acetonitrile : water : triethyelamine in the ratio of (70 : 28 : 2v/v was used. The pH of mobile phase was adjusted to 4.0 with ortho-phosphoric acid. The flow rate was 1 mL/min and the column effluents were monitored at 260 nm. The retention time for gemcitabine hydrochloride and capecitabine hydrochloride was found to be 2.76 and 2.3 min respectively. The proposed method was validated in terms of linearity, accuracy, precision, limit of detection, limit of quantitation and robustness. The method was found to be linear in the range of 10-50 µg/mL and 4-24 µg/mL for gemcitabine hydrochloride and capecitabine hydrochloride, with regression coefficient r = 0.999 and r = 0.999, respectively.

  4. Challenges and opportunities of using liquid chromatography and mass spectrometry methods to develop complex vaccine antigens as pharmaceutical dosage forms.

    Science.gov (United States)

    Hickey, John M; Sahni, Neha; Toth, Ronald T; Kumru, Ozan S; Joshi, Sangeeta B; Middaugh, C Russell; Volkin, David B

    2016-10-01

    Liquid chromatographic methods, combined with mass spectrometry, offer exciting and important opportunities to better characterize complex vaccine antigens including recombinant proteins, virus-like particles, inactivated viruses, polysaccharides, and protein-polysaccharide conjugates. The current abilities and limitations of these physicochemical methods to complement traditional in vitro and in vivo vaccine potency assays are explored in this review through the use of illustrative case studies. Various applications of these state-of-the art techniques are illustrated that include the analysis of influenza vaccines (inactivated whole virus and recombinant hemagglutinin), virus-like particle vaccines (human papillomavirus and hepatitis B), and polysaccharide linked to protein carrier vaccines (pneumococcal). Examples of utilizing these analytical methods to characterize vaccine antigens in the presence of adjuvants, which are often included to boost immune responses as part of the final vaccine dosage form, are also presented. Some of the challenges of using chromatographic and LC-MS as physicochemical assays to routinely test complex vaccine antigens are also discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. New Stability Indicating RP-HPLC Method for the Estimation of Cefpirome Sulphate in Bulk and Pharmaceutical Dosage Forms.

    Science.gov (United States)

    Rao, Kareti Srinivasa; Kumar, Keshar Nargesh; Joydeep, Datta

    2011-01-01

    A simple stability indicating reversed-phase HPLC method was developed and subsequently validated for estimation of Cefpirome sulphate (CPS) present in pharmaceutical dosage forms. The proposed RP-HPLC method utilizes a LiChroCART-Lichrosphere100, C18 RP column (250 mm × 4mm × 5 μm) in an isocratic separation mode with mobile phase consisting of methanol and water in the proportion of 50:50 % (v/v), at a flow rate 1ml/min, and the effluent was monitored at 270 nm. The retention time of CPS was 2.733 min and its formulation was exposed to acidic, alkaline, photolytic, thermal and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. The described method was linear over a range of 0.5-200μg/ml. The percentage recovery was 99.46. F-test and t-test at 95% confidence level were used to check the intermediate precision data obtained under different experimental setups; the calculated value was found to be less than the critical value.

  6. Zein as a Pharmaceutical Excipient in Oral Solid Dosage Forms: State of the Art and Future Perspectives.

    Science.gov (United States)

    Berardi, Alberto; Bisharat, Lorina; AlKhatib, Hatim S; Cespi, Marco

    2018-05-07

    Zein is the main storage protein of corn and it has several industrial applications. Mainly in the last 10-15 years, zein has emerged as a potential pharmaceutical excipient with unique features. Zein is a natural, biocompatible and biodegradable material produced from renewable sources. It is insoluble, yet due to its amphiphilic nature, it has self-assembling properties, which have been exploited for the formation of micromicroparticle and nanoparticle and films. Moreover, zein can hydrate so it has been used in swellable matrices for controlled drug release. Other pharmaceutical applications of zein in oral drug delivery include its incorporation in solid dispersions of poorly soluble drugs and in colonic drug delivery systems. This review describes the features of zein significant for its use as a pharmaceutical excipient for oral drug delivery, and it summaries the literature relevant to macroscopic zein-based oral dosage forms, i.e. tablets, capsules, beads and powders. Particular attention is paid to the most novel formulations and applications of zein. Moreover, gaps of knowledge as well as possible venues for future investigations on zein are highlighted.

  7. Klucel™ EF and ELF polymers for immediate-release oral dosage forms prepared by melt extrusion technology.

    Science.gov (United States)

    Mohammed, Noorullah Naqvi; Majumdar, Soumyajit; Singh, Abhilasha; Deng, Weibin; Murthy, Narasimha S; Pinto, Elanor; Tewari, Divya; Durig, Thomas; Repka, Michael A

    2012-12-01

    The objective of this research work was to evaluate Klucel™ hydroxypropylcellulose (HPC) EF and ELF polymers, for solubility enhancement as well as to address some of the disadvantages associated with solid dispersions. Ketoprofen (KPR), a Biopharmaceutics Classification System class II drug with poor solubility, was utilized as a model compound. Preliminary thermal studies were performed to confirm formation of a solid solution/dispersion of KPR in HPC matrix and also to establish processing conditions for hot-melt extrusion. Extrudates pelletized and filled into capsules exhibited a carrier-dependent release with ELF polymer exhibiting a faster release. Tablets compressed from milled extrudates exhibited rapid release owing to the increased surface area of the milled extrudate. Addition of mannitol (MNT) further enhanced the release by forming micro-pores and increasing the porosity of the extrudates. An optimized tablet formulation constituting KPR, MNT, and ELF in a 1:1:1 ratio exhibited 90% release in 15 min similar to a commercial capsule formulation. HPC polymers are non-ionic hydrophilic polymers that undergo polymer-chain-length-dependent solubilization and can be used to enhance solubility or dissolution rate of poorly soluble drugs. Dissolution/release rate could be tailored for rapid-release applications by selecting a suitable HPC polymer and altering the final dosage form. The release obtained from pellets was carrier-dependent and not drug-dependent, and hence, such a system can be effectively utilized to address solubility or precipitation issues with poorly soluble drugs in the gastrointestinal environment.

  8. Predicting the oral pharmacokinetic profiles of multiple-unit (pellet) dosage forms using a modeling and simulation approach coupled with biorelevant dissolution testing: case example diclofenac sodium.

    Science.gov (United States)

    Kambayashi, Atsushi; Blume, Henning; Dressman, Jennifer B

    2014-07-01

    The objective of this research was to characterize the dissolution profile of a poorly soluble drug, diclofenac, from a commercially available multiple-unit enteric coated dosage form, Diclo-Puren® capsules, and to develop a predictive model for its oral pharmacokinetic profile. The paddle method was used to obtain the dissolution profiles of this dosage form in biorelevant media, with the exposure to simulated gastric conditions being varied in order to simulate the gastric emptying behavior of pellets. A modified Noyes-Whitney theory was subsequently fitted to the dissolution data. A physiologically-based pharmacokinetic (PBPK) model for multiple-unit dosage forms was designed using STELLA® software and coupled with the biorelevant dissolution profiles in order to simulate the plasma concentration profiles of diclofenac from Diclo-Puren® capsule in both the fasted and fed state in humans. Gastric emptying kinetics relevant to multiple-units pellets were incorporated into the PBPK model by setting up a virtual patient population to account for physiological variations in emptying kinetics. Using in vitro biorelevant dissolution coupled with in silico PBPK modeling and simulation it was possible to predict the plasma profile of this multiple-unit formulation of diclofenac after oral administration in both the fasted and fed state. This approach might be useful to predict variability in the plasma profiles for other drugs housed in multiple-unit dosage forms. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Unveiling multiple solid-state transitions in pharmaceutical solid dosage forms using multi-series hyperspectral imaging and different curve resolution approaches

    DEFF Research Database (Denmark)

    Alexandrino, Guilherme L; Amigo Rubio, Jose Manuel; Khorasani, Milad Rouhi

    2017-01-01

    Solid-state transitions at the surface of pharmaceutical solid dosage forms (SDF) were monitored using multi-series hyperspectral imaging (HSI) along with Multivariate Curve Resolution – Alternating Least Squares (MCR-ALS) and Parallel Factor Analysis (PARAFAC and PARAFAC2). First, the solid-stat...

  10. [Pharmaceutical counseling of non-conventional dosage forms concerning the health-literacy and the patient adherence in public medication dispensing -Questionnaire surveys in Hungarian community pharmacies.

    Science.gov (United States)

    Somogyi, O; Zelko, R

    Although the non-conventional dosage forms (e.g. modified release per oral systems or transdermal patches) have more significant advantages than other conventional dosage forms, the pa- tients have to apply them correctly in their home medicine using to reach the effective and safe therapy. A guideline of relevant application instructions contribute to development of an effective pharmaceutical counseling in community pharmacies. The counseling and advices can improve the patients' knowledge concerning application rules of different new dosage forms (health- literacy) with patient adherence. Finally it will result more effective and safer therapies. The aim of our Hungarian questionnaire surveys was to explore the patients' drug application habits or application errors and improve special verbal counseling of mentioned non-conventional dosage forms in community pharmacies. Understandable patient information leaflets were developed about application rules and besides the levels of patients' reading comprehension was evaluated in case of the leaflet of medicinal patches. The results show that a properly developed text is useful for the majority of patients but they need the verbal explanation as well, moreover there is a demand for the verbal counseling in community pharmacies. The most common application errors were explored and the most effective instructions or application rules were collected for the pharmacists and patients concerning the modified release tablets or capsules and transdermal patches.

  11. The knowledge, attitudes and beliefs of patients and their healthcare professionals around oral dosage form modification: A systematic review of the qualitative literature.

    Science.gov (United States)

    Mc Gillicuddy, Aoife; Kelly, Maria; Crean, Abina M; Sahm, Laura J

    The objective of this systematic review was to synthesize the available qualitative evidence on the knowledge, attitudes and beliefs of adult patients, healthcare professionals and carers about oral dosage form modification. A systematic review and synthesis of qualitative studies was undertaken, utilising the thematic synthesis approach. The following databases were searched from inception to September 2015: PubMed, Medline (EBSCO), EMBASE, CINAHL, PsycINFO, Web of Science, ProQuest Databases, Scopus, Turning Research Into Practice (TRIP), Cochrane Central Register of Controlled Trials (CENTRAL) and the Cochrane Database of Systematic Reviews (CDSR). Citation tracking and searching the references lists of included studies was also undertaken. Grey literature was searched using the OpenGrey database, internet searching and personal knowledge. An updated search was undertaken in June 2016. Studies meeting the following criteria were eligible for inclusion; (i) used qualitative data collection and analysis methods; (ii) full-text was available in English; (iii) included adult patients who require oral dosage forms to be modified to meet their needs or; (iv) carers or healthcare professionals of patients who require oral dosage forms to be modified. Two reviewers independently appraised the quality of the included studies using the Critical Appraisal Skills Programme Checklist. A thematic synthesis was conducted and analytical themes were generated. Of 5455 records screened, seven studies were eligible for inclusion; three involved healthcare professionals and the remaining four studies involved patients. Four analytical themes emerged from the thematic synthesis: (i) patient-centred individuality and variability; (ii) communication; (iii) knowledge and uncertainty and; (iv) complexity. The variability of individual patient's requirements, poor communication practices and lack of knowledge about oral dosage form modification, when combined with the complex and multi

  12. Novel potentiometric application for the determination of pantoprazole sodium and itopride hydrochloride in their pure and combined dosage form.

    Science.gov (United States)

    Ragab, Mona T; Abd El-Rahman, Mohamed K; Ramadan, Nesrin K; El-Ragehy, Nariman A; El-Zeany, Badr A

    2015-06-01

    Three sensitive and selective polyvinyl chloride (PVC) matrix membrane electrodes were developed and investigated. Sensor I was developed using tetraheptylammonium bromide (THB) as an anion exchanger with 2-nitrophenyl octyl ether (2-NPOE) as a plasticizer for the determination of the anionic drug pantoprazole sodium sesquihydrate (PAN). To determine the cationic drug itopride hydrochloride (ITH), two electrodes (sensors II and III) were developed using potassium tetrakis(4-chlorophenyl) borate (KTCPB) as a cation exchanger with dioctyl phthalate (DOP) as a plasticizer. Selective molecular recognition components, 2-hydroxypropyl-β-cyclodextrin (2-HP βCD) and 4-tert-butylcalix[8]arene (tBC8), were used as ionophores to improve the selectivity of sensors II and III, respectively. The proposed sensors had a linear dynamic range of 1×10(-5) to 1×10(-2) mol L(-1) with Nernstian slopes of -54.83±0.451, 56.90±0.300, and 51.03±1.909 mV/decade for sensors I, II and III, respectively. The Nernstian slopes were also estimated over the pH ranges of 11-13, 3.5-8 and 4-7 for the three sensors, respectively. The proposed sensors displayed useful analytical characteristics for the determination of PAN and ITH in bulk powder, in laboratory prepared mixtures and in combined dosage forms with clear discrimination from several ions, sugars and some common drug excipients. The method was validated according to ICH guidelines. Statistical comparison between the results from the proposed method and the results from the reference methods showed no significant difference regarding accuracy and precision. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Development and validation of spectrophotometric methods for simultaneous estimation of citicoline and piracetam in tablet dosage form

    Directory of Open Access Journals (Sweden)

    Akhila Sivadas

    2013-01-01

    Full Text Available Context: Citicoline (CN and piracetam (PM combination in tablet formulation is newly introduced in market. It is necessary to develop suitable quality control methods for rapid and accurate determination of these drugs. Aim: The study aimed to develop the methods for simultaneous determination of CN and PM in combined dosage form. Materials and Methods: The first method was developed by formation and solving simultaneous equations using 280.3 and 264.1 nm as two analytical wavelengths. Second method was absorbance ratio in which wavelengths selected were 256.6 nm as its absorptive point and 280.3 nm as λmax of CN. According to International Conference on Harmonization (ICH norm, the parameters - linearity, precision, and accuracy were studied. The methods were validated statistically and by recovery studies. Results: Both the drugs obeyed Beer-Lambert′s law at the selected wavelengths in concentration range of 5-13 μg/ml for CN and 10-22 μg/ml for PM. The percentage of CN and PM in marketed tablet formulation was found to be 99.006 ± 0.173 and 99.257 ± 0.613, respectively; by simultaneous equation method. For Q-Absorption ratio method the percentage of CN and PM was found to be 99.078 ± 0.158 and 99.708 ± 0.838, respectively. Conclusions: The proposed methods were simple, reproducible, precise and robust. The methods can be successfully applied for routine analysis of tablets.

  14. Validated sensitive spectrofluorimetric method for determination of antihistaminic drug azelastine HCl in pure form and in pharmaceutical dosage forms: application to stability study.

    Science.gov (United States)

    El-Masry, Amal A; Hammouda, Mohammed E A; El-Wasseef, Dalia R; El-Ashry, Saadia M

    2017-03-01

    A highly sensitive, simple and rapid spectrofluorimetric method was developed for the determination of azelastine HCl (AZL) in either its pure state or pharmaceutical dosage form. The proposed method was based on measuring the native fluorescence of the studied drug in 0.2 M H 2 SO 4 at λ em  = 364 nm after excitation at λ ex  = 275 nm. Different experimental parameters were studied and optimized carefully to obtain the highest fluorescence intensity. The proposed method showed a linear dependence of the fluorescence intensity on drug concentration over a concentration range of 10-250 ng/mL, with a limit of detection of 1.52 ng/mL and limit of quantitation of 4.61 ng/mL. Moreover, the method was successfully applied to pharmaceutical preparations, with percent recovery values (± SD) of 99.96 (± 0.4) and 100.1 (± 0.52) for nasal spray and eye drops, respectively. The results were in good agreement with those obtained by the comparison method, as revealed by Student's t-test and the variance ratio F-test. The method was extended to study the stability of AZL under stress conditions, where the drug was exposed to neutral, acidic, alkaline, oxidative and photolytic degradation according to International Conference on Harmonization (ICH) guidelines. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  15. Development and Validation of RP-HPLC Method for the Simultaneous Determination of Rabeprazole Sodium and Itopride Hydrochloride in Solid Dosage Form

    Directory of Open Access Journals (Sweden)

    Rajesh Sharma

    2010-01-01

    Full Text Available A simple, sensitive, precise, accurate, rapid and reproducible reverse phase high performance liquid chromatographic procedure is developed for simultaneous determination of rabeprazole sodium and itopride hydrochloride in solid dosage form. The mobile phase used was a combination of acetonitrile: buffer (35:65 v/v and the pH was adjusted to 7.0 ± 0.1 by addition of triethylamine. The detection of the capsule dosage form was carried out at 266 nm and a flow rate employed was 1 mL/min. Linearity was obtained in the concentration range of 2 to 16 μg/mL of rabeprazole sodium and 5 to 55 μg/mL of itopride hydrochloride with a correlation coefficient of 0.9992 and 0.9996 respectively. The results of the analysis were validated statistically and recovery studies confirmed the accuracy of the proposed method.

  16. A novel once daily microparticulate dosage form comprising lansoprazole to prevent nocturnal acid breakthrough in the case of gastro-esophageal reflux disease: preparation, pharmacokinetic and pharmacodynamic evaluation.

    Science.gov (United States)

    Alai, Milind; Lin, Wen Jen

    2013-01-01

    The objective of this study was to formulate and evaluate the lansoprazole (LPZ)-loaded microparticles to prevent nocturnal acid breakthrough in the case of gastro-esophageal reflux disease (GERD). The microparticulate delivery system was prepared by solvent evaporation method using Eudragit RS100 as a matrix polymer followed by enteric coated with Eudragit S100 and hydroxypropyl methylcellulose phthalate HP55 using spray drying method. The enteric coated microparticles were stable in gastric pH condition. In vivo pharmacokinetic and pharmacodynamic studies in male Wistar rats demonstrated that enteric coated microparticles sustained release of LPZ and promoted ulcer healing activity. In other words, the microparticulate dosage form provided effective drug concentration for a longer period as compared to conventional extended release dosage form, and showed sufficient anti-acid secretion activity to treat acid related disorders including the enrichment of nocturnal acid breakthrough event based on a once daily administration.

  17. Development and Validation of UV-Visible Spectrophotometric Methods for Simultaneous Estimation of Thiocolchicoside and Dexketoprofen in Bulk and Tablet Dosage Form

    OpenAIRE

    M. T. Harde; S. B. Jadhav; D. L. Dharam; P. D. Chaudhari

    2012-01-01

    Development and validation of two simple, accurate, precise and economical UV Spectrophotometric methods for simultaneous estimation of Thiocolchicoside and Dexketoprofen in bulk and in tablet dosage form. The methods employed were Method-1 Absorbance correction method and Method-2 First order derivative spectroscopic method. In method-1 Absorbance is measured at two wavelengths 370nm at which Dexketoprofen has no absorbance and 255nm at which both the drug have considerable absorbance. In me...

  18. A Study of Method Development, Validation, and Forced Degradation for Simultaneous Quantification of Paracetamol and Ibuprofen in Pharmaceutical Dosage Form by RP-HPLC Method

    OpenAIRE

    Jahan, Md. Sarowar; Islam, Md. Jahirul; Begum, Rehana; Kayesh, Ruhul; Rahman, Asma

    2014-01-01

    A rapid and stability-indicating reversed phase high-performance liquid chromatography (RP-HPLC) method was developed for simultaneous quantification of paracetamol and ibuprofen in their combined dosage form especially to get some more advantages over other methods already developed for this combination. The method was validated according to United States Pharmacopeia (USP) guideline with respect to accuracy, precision, specificity, linearity, solution stability, robustness, sensitivity, and...

  19. A systematic review of the use of dosage form manipulation to obtain required doses to inform use of manipulation in paediatric practice.

    Science.gov (United States)

    Richey, Roberta H; Hughes, Clare; Craig, Jean V; Shah, Utpal U; Ford, James L; Barker, Catrin E; Peak, Matthew; Nunn, Anthony J; Turner, Mark A

    2017-02-25

    This study sought to determine whether there is an evidence base for drug manipulation to obtain the required dose, a common feature of paediatric clinical practice. A systematic review of the data sources, PubMed, EMBASE, CINAHL, IPA and the Cochrane database of systematic reviews, was used. Studies that considered the dose accuracy of manipulated medicines of any dosage form, evidence of safety or harm, bioavailability, patient experience, tolerability, contamination and comparison of methods of manipulation were included. Case studies and letters were excluded. Fifty studies were eligible for inclusion, 49 of which involved tablets being cut, split, crushed or dispersed. The remaining one study involved the manipulation of suppositories of one drug. No eligible studies concerning manipulation of oral capsules or liquids, rectal enemas, nebuliser solutions, injections or transdermal patches were identified. Twenty four of the tablet studies considered dose accuracy using weight and/or drug content. In studies that considered weight using adapted pharmacopoeial specifications, the percentage of halved tablets meeting these specifications ranged from 30% to 100%. Eighteen studies investigated bioavailability, pharmacokinetics or clinical outcomes following manipulations which included nine delayed or modified release formulations. In each of these nine studies the entirety of the dosage form was administered. Only one of the 18 studies was identified where drugs were manipulated to obtain a proportion of the dosage form, and that proportion administered. The five studies that considered patient perception found that having to manipulate the tablets did not have a negative impact on adherence. Of the 49 studies only two studies reported investigating children. This review yielded limited evidence to support manipulation of medicines for children. The results cannot be extrapolated between dosage forms, methods of manipulation or between different brands of the same

  20. Development and Validation of a Precise, Single HPLC Method for the Determination of Tolperisone Impurities in API and Pharmaceutical Dosage Forms

    OpenAIRE

    Raju, Thummala Veera Raghava; Seshadri, Raja Kumar; Arutla, Srinivas; Mohan, Tharlapu Satya Sankarsana Jagan; Rao, Ivaturi Mrutyunjaya; Nittala, Someswara Rao

    2012-01-01

    A novel, sensitive, stability-indicating HPLC method has been developed for the quantitative estimation of Tolperisone-related impurities in both bulk drugs and pharmaceutical dosage forms. Effective chromatographic separation was achieved on a C18 stationary phase with a simple mobile phase combination delivered in a simple gradient programme, and quantitation was by ultraviolet detection at 254 nm. The mobile phase consisted of a buffer and acetonitrile delivered at a flow rate 1.0 ml/min. ...

  1. Semi-quantitative prediction of a multiple API solid dosage form with a combination of vibrational spectroscopy methods.

    Science.gov (United States)

    Hertrampf, A; Sousa, R M; Menezes, J C; Herdling, T

    2016-05-30

    Quality control (QC) in the pharmaceutical industry is a key activity in ensuring medicines have the required quality, safety and efficacy for their intended use. QC departments at pharmaceutical companies are responsible for all release testing of final products but also all incoming raw materials. Near-infrared spectroscopy (NIRS) and Raman spectroscopy are important techniques for fast and accurate identification and qualification of pharmaceutical samples. Tablets containing two different active pharmaceutical ingredients (API) [bisoprolol, hydrochlorothiazide] in different commercially available dosages were analysed using Raman- and NIR Spectroscopy. The goal was to define multivariate models based on each vibrational spectroscopy to discriminate between different dosages (identity) and predict their dosage (semi-quantitative). Furthermore the combination of spectroscopic techniques was investigated. Therefore, two different multiblock techniques based on PLS have been applied: multiblock PLS (MB-PLS) and sequential-orthogonalised PLS (SO-PLS). NIRS showed better results compared to Raman spectroscopy for both identification and quantitation. The multiblock techniques investigated showed that each spectroscopy contains information not present or captured with the other spectroscopic technique, thus demonstrating that there is a potential benefit in their combined use for both identification and quantitation purposes. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Stability-Indicating RP-HPLC Method for Analysis of Paracetamol and Tramadol in a Pharmaceutical Dosage Form

    OpenAIRE

    Kamble, Rajesh M.; Singh, Shrawan G.

    2012-01-01

    A simple, isocratic, rapid and accurate reversed phase high performance liquid chromatography method was developed for the quantitative determination of paracetamol and tramadol in commercial medicinal tablets. The chromatographic separation was achieved on an Intersil C18 (250 mm x 4.6 mm, 5μm) column using water pH 3.4 with orthophosphoric acid: methanol (60:40, v/v) as a mobile phase, and UV detection at 228 nm. The chromatographic resolutions between paracetamol and tramadol were found gr...

  3. PREPARATION AND CHARACTERIZATION OF CO-PROCESSED EXCIPIENT-PREGELATINIZED CASSAVA STARCH PROPIONATE AS A MATRIX IN THE GASTRORETENTIVE DOSAGE FORM

    Directory of Open Access Journals (Sweden)

    Junaedi

    2011-11-01

    Full Text Available The gastroretentive dosage form is designed to prolong the gastric residence time of the drug delivery system whichalso results in the development of an appropriate excipient. The purpose of this study is to develop and characterize coprocessedexcipient made from carrageenan (kappa-iota = 1:1 and pregelatinized cassava starch propionate (PCSP inratios of 1:1, 1:2, and 1:3. PCSP was prepared with propionic anhydride in an aqueous medium. The product was mixedwith carrageenan (kappa-iota = 1:1, as well as characterized physicochemical and functional properties. The coprocessedexcipient was then used as a mucoadhesive granule and floating tablet. The USP Basket was selected toperform the dissolution test of the granules in HCl buffer (pH 1.2 and distilled water for 8 hours each. Mucoadhesiveproperties were evaluated using bioadhesive through a vitro test and wash-off test. As for the floating tablet, the USPPaddle was selected to perform the dissolution test of the tablets in 0.1 N HCl for 10 hours. The floating lag time andfloating time were tested in 0.1 N HCl for 24 hours. The result of these studies indicated that co-processed excipientcarrageenan-PCSP can retard dosage form in gastric and drug controlled release, thus making it a suitable material forthe gastroretentive dosage form.

  4. COMPARISON OF PHYSICAL STABILITY PROPERTIES OF POMEGRANATE SEED OIL NANOEMULSION DOSAGE FORMS WITH LONG-CHAIN TRIGLYCERIDE AND MEDIUM-CHAIN TRIGLYCERIDE AS THE OIL PHASE

    Directory of Open Access Journals (Sweden)

    Sri Hartanti Yuliani

    2016-08-01

    Full Text Available Pomegranate seed oil has antioxidant, anti-inflammatory, and chemo preventive activities. Pomegranate seed oil is lipophilic substance suitable to be prepared in emulsion dosage forms. Long-chain triglyceride (LCT and medium-chain triglyceride (MCT are commonly used as oil phase in emulsion dosage forms. This research aimed to compare the use of LCT and MCT in the Nano emulsion formula of pomegranate seed oil dosage forms. Formulation of pomegranate seed oil Nano emulsion was conducted using high energy emulsification. Parameters observed were pH, Nano emulsion type, percent transmittance, viscosity, turbidity, and droplet size before and after 3 cycles of freeze-thaw. The result showed that there was no significant difference between physical properties of pomegranate oil Nano emulsion with LCT as oil phase and pomegranate oil Nano emulsion with MCT as oil phase. Moreover, physical stability of pomegranate oil Nano emulsion with LCT as oil phase was better than pomegranate oil Nano emulsion with MCT as oil phase.

  5. Pasteurization as a tool to control the bio-burden in solid herbal dosage forms: A pilot study of formulating Ashoka tablets with an industrial perspective.

    Science.gov (United States)

    Pushpalatha, Hulikal Basavarajaiah; Pramod, Kumar; Sundaram, Ramachandran; Shyam, Ramakrishnan

    2014-10-01

    Irradiation and use of preservatives are routine procedures to control bio-burden in solid herbal dosage forms. Use of steam or pasteurization is even though reported in the literature, not many studies are available with respect to its application in reducing the bio-burden in herbal drug formulations. Hence, we undertook a series of studies to explore the suitability of pasteurization as a method to reduce bio-burden during formulation and development of herbal dosage forms, which will pave the way for preparing preservative-free formulations. Optimized Ashoka (Saraca indica) tablets were formulated and developed. The optimized formula was then subjected to pasteurization during formulation, with an aim to keep the microbial count well within the limits of pharmacopoeial standards. Then, three variants of the optimized Ashoka formulation - with preservative, without preservative and formulation without preservative and subjected to pasteurization, were compared by routine in-process parameters and stability studies. The results obtained indicate that Ashoka tablets manufactured by inclusion of the pasteurization technique not only showed the bio-burden to be within the limits of pharmacopoeial standards, but also exhibited the compliance with other parameters, such as stability and quality. The outcome of this pilot study shows that pasteurization can be employed as a distinctive method for reducing bio-burden during the formulation and development of herbal dosage forms, such as tablets.

  6. Electrospun poly(ε-caprolactone) matrices containing silver sulfadiazine complexed with β-cyclodextrin as a new pharmaceutical dosage form to wound healing: preliminary physicochemical and biological evaluation.

    Science.gov (United States)

    Souza, Sarah Oliveira Lamas; Cotrim, Monique Alvarenga Pinto; Oréfice, Rodrigo Lambert; Carvalho, Suzana Gonçalves; Dutra, Jessyca Aparecida Paes; de Paula Careta, Francisco; Resende, Juliana Alves; Villanova, Janaina Cecília Oliveira

    2018-05-10

    Cooperation between researchers in the areas of medical, pharmaceutical and materials science has facilitated the development of pharmaceutical dosage forms that elicit therapeutic effects and protective action with a single product. In addition to optimizing pharmacologic action, such dosage forms provide greater patient comfort and increase success and treatment compliance. In the present work, we prepared semipermeable bioactive electrospun fibers for use as wound dressings containing silver sulfadiazine complexed with β-cyclodextrin in a poly(Ɛ-caprolactone) nanofiber matrix aiming to reduce the direct contact between silver and skin and to modulate the drug release. Wound dressings were prepared by electrospinning, and were subjected to ATR-FT-IR and TG/DTG assays to evaluate drug stability. The hydrophilicity of the fibrous nanostructure in water and PBS buffer was studied by goniometry. Electrospun fibers permeability and swelling capacity were assessed, and a dissolution test was performed. In vitro biological tests were realized to investigate the biological compatibility and antimicrobial activity. We obtained flexible matrices that were each approximately 1.0 g in weight. The electrospun fibers were shown to be semipermeable, with water vapor transmission and swelling indexes compatible with the proposed objective. The hydrophilicity was moderate. Matrices containing pure drug modulated drug release adequately during 24 h but presented a high hemolytic index. Complexation promoted a decrease in the hemolytic index and in the drug release but did not negatively impact antimicrobial activity. The drug was released predominantly by diffusion. These results indicate that electrospun PCL matrices containing β-cyclodextrin/silver sulfadiazine inclusion complexes are a promising pharmaceutical dosage form for wound healing.

  7. Development and Validation of a Stability-Indicating RP-HPLC Method for Rapid Determination of Doxycycline in Pharmaceutical Bulk and Dosage Forms

    OpenAIRE

    Shabnam Pourmoslemi, Soroush Mirfakhraee, Saeid Yaripour, Ali Mohammadi

    2016-01-01

    Background: A rapid stability-indicating RP-HPLC method for analysis of doxycycline in the presence of its degradation products was developed and validated. Methods: Forced degradation studies were carried out on bulk samples and capsule dosage forms of doxycycline using acid, base, H2O2, heat, and UV light as described by ICH for stress conditions to demonstrate the stability-indicating power of the method. Separations were performed on a Perfectsil® Target ODS column (3-5µm, 125 mm×4 mm), u...

  8. Development of a stability-indicating high performance liquid chromatography method for assay of erythromycin ethylsuccinate in powder for oral suspension dosage form

    Directory of Open Access Journals (Sweden)

    Fahimeh Kamarei

    2014-12-01

    Full Text Available In this study an effective method was developed to assay erythromycin ethylsuccinate for an oral suspension dosage form. The chromatographic separation was achieved on an X-Terra™ C18 analytical column. A mixture of acetonitrile–ammonium dihydrogen phosphate buffer (0.025 mol L-1 (60:40, V/V (pH 7.0 was used as the mobile phase, effluent flow rate monitored at 1.0 mL min−1, and UV detection at 205 nm. In forced degradation studies, the effects of acid, base, oxidation, UV light and temperature were investigated showing no interference in the peak of drug. The proposed method was validated in terms of specificity, linearity, robustness, precision and accuracy. The method was linear at concentrations ranging from 400 to 600 μg mL−1, precise (intra- and inter-day relative standard deviations <0.65, accurate (mean recovery; 99.5%. The impurities and degradation products of erythromycin ethylsuccinate were selectively determined with good resolution in both the raw material and the final suspension forms. The method could be useful for both routine analytical and quality control assays of erythromycin ethylsuccinate in commercial powder for an oral suspension dosage form and it could be a very powerful tool to investigate the chemical stability of erythromycin ethylsuccinate.

  9. Determination of dasatinib in the tablet dosage form by ultra high performance liquid chromatography, capillary zone electrophoresis, and sequential injection analysis.

    Science.gov (United States)

    Gonzalez, Aroa Garcia; Taraba, Lukáš; Hraníček, Jakub; Kozlík, Petr; Coufal, Pavel

    2017-01-01

    Dasatinib is a novel oral prescription drug proposed for treating adult patients with chronic myeloid leukemia. Three analytical methods, namely ultra high performance liquid chromatography, capillary zone electrophoresis, and sequential injection analysis, were developed, validated, and compared for determination of the drug in the tablet dosage form. The total analysis time of optimized ultra high performance liquid chromatography and capillary zone electrophoresis methods was 2.0 and 2.2 min, respectively. Direct ultraviolet detection with detection wavelength of 322 nm was employed in both cases. The optimized sequential injection analysis method was based on spectrophotometric detection of dasatinib after a simple colorimetric reaction with folin ciocalteau reagent forming a blue-colored complex with an absorbance maximum at 745 nm. The total analysis time was 2.5 min. The ultra high performance liquid chromatography method provided the lowest detection and quantitation limits and the most precise and accurate results. All three newly developed methods were demonstrated to be specific, linear, sensitive, precise, and accurate, providing results satisfactorily meeting the requirements of the pharmaceutical industry, and can be employed for the routine determination of the active pharmaceutical ingredient in the tablet dosage form. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Utility of eosin Y as a complexing reagent for the determination of citalopram hydrobromide in commercial dosage forms by fluorescence spectrophotometry.

    Science.gov (United States)

    Azmi, Syed Najmul Hejaz; Al-Fazari, Ahlam; Al-Badaei, Munira; Al-Mahrazi, Ruqiya

    2015-12-01

    An accurate, selective and sensitive spectrofluorimetric method was developed for the determination of citalopram hydrobromide in commercial dosage forms. The method was based on the formation of a fluorescent ion-pair complex between citalopram hydrobromide and eosin Y in the presence of a disodium hydrogen phosphate/citric acid buffer solution of pH 3.4 that was extractable in dichloromethane. The extracted complex showed fluorescence intensity at λem = 554 nm after excitation at 259 nm. The calibration curve was linear over at concentrations of 2.0-26.0 µg/mL. Under optimized experimental conditions, the proposed method was validated as per ICH guidelines. The effect of common excipients used as additives was tested and the tolerance limit calculated. The limit of detection for the proposed method was 0.121 μg/mL. The proposed method was successfully applied to the determination of citalopram hydrobromide in commercial dosage forms. The results were compared with the reference RP-HPLC method. Copyright © 2015 John Wiley & Sons, Ltd.

  11. A Stability-Indicating HPLC Method for the Determination of Memantine Hydrochloride in Dosage Forms through Derivatization with 1-Fluoro-2,4-dinitrobenzene

    Science.gov (United States)

    Jalalizadeh, Hassan; Raei, Mahdi; Tafti, Razieh Fallah; Farsam, Hassan; Kebriaeezadeh, Abbas; Souri, Effat

    2014-01-01

    Memantine is chemically a tricyclic amine and is used for Parkinson’s disease and movement disorders. Although several HPLC methods with different derivatization reagents have been developed for the determination of memantine in biological fluids, there are some complications which limit the use of these methods in routine analysis of memantine in in vitro tests. We established a simple, sensitive, precise, and accurate HPLC method for the quantification of memantine in dosage forms. Pre-column derivatization of memantine was performed with 1-fluoro-2,4-dinitrobenzene and the reaction product was separated on a Nova-Pak C18 column. A mixture of acetonitrile and sodium dihydrogenphosphate (pH 2.5; 0.05 M) (70: 30, v/v) was used as the mobile phase. UV detection was performed at 360 nm. Forced degradation studies were performed on a powdered tablet sample of memantine hydro-chloride using acidic (0.1 M hydrochloric acid), basic (0.1 M sodium hydroxide), oxidative (10% hydrogen peroxide), thermal (105°C), photolytic, and humidity conditions. Good linearity (r2=0.999) was obtained over the range of 1–12 μg mL−1 of memantine hydrochloride with acceptable within-day and between-day precision values in the range of 0.05–0.95%. The proposed method was used for the assay determination and dissolution rate study of memantine dosage forms with excellent specificity. PMID:24959398

  12. Development and Validation of a Stability-Indicating RP-HPLC Method for Rapid Determination of Doxycycline in Pharmaceutical Bulk and Dosage Forms

    Directory of Open Access Journals (Sweden)

    Shabnam Pourmoslemi, Soroush Mirfakhraee, Saeid Yaripour, Ali Mohammadi

    2016-06-01

    Full Text Available Background: A rapid stability-indicating RP-HPLC method for analysis of doxycycline in the presence of its degradation products was developed and validated. Methods: Forced degradation studies were carried out on bulk samples and capsule dosage forms of doxycycline using acid, base, H2O2, heat, and UV light as described by ICH for stress conditions to demonstrate the stability-indicating power of the method. Separations were performed on a Perfectsil® Target ODS column (3-5µm, 125 mm×4 mm, using a mobile phase consisting of methanol-50 mM ammonium acetate buffer (containing 0.1% v/v trifluoroacetic acid and 0.1% v/v triethylamine, pH 2.5 (50:50 v/v at room temperature. The flow rate was 0.8 mL/min. Results: The method linearity was investigated in the range of 25–500 µg/mL (r > 0.9999. The LOD and LOQ were 5 and 25 µg/mL, respectively. The method selectivity was evaluated by peak purity test using a diode array detector. There was no interference among detection of doxycycline and its stressed degradation products. Total peak purity numbers were in the range of 0.94-0.99, indicating the homogeneity of DOX peaks. Conclusion: These data show the stability-indicating nature of the method for quality control of doxycycline in bulk samples and capsule dosage forms.

  13. Utility of Hantzsch reaction for development of highly sensitive spectrofluorimetric method for determination of alfuzosin and terazosin in bulk, dosage forms and human plasma.

    Science.gov (United States)

    Hammad, Mohamed A; Omar, Mahmoud A; Salman, Baher I

    2017-09-01

    A highly sensitive, cheap, simple and accurate spectrofluorimetric method has been developed and validated for the determination of alfuzosin hydrochloride and terazosin hydrochloride in their pharmaceutical dosage forms and in human plasma. The developed method is based on the reaction of the primary amine moiety in the studied drugs with acetylacetone and formaldehyde according to the Hantzsch reaction, producing yellow fluorescent products that can be measured spectrofluorimetrically at 480 nm after excitation at 415 nm. Different experimental parameters affecting the development and stability of the reaction products were carefully studied and optimized. The fluorescence-concentration plots of alfuzosin and terazosin were rectilinear over a concentration range of 70-900 ng ml -1 , with quantitation limits 27.1 and 32.2 ng ml -1 for alfuzosin and terazosin, respectively. The proposed method was validated according to ICH guidelines and successfully applied to the analysis of the investigated drugs in dosage forms, content uniformity test and spiked human plasma with high accuracy. Copyright © 2017 John Wiley & Sons, Ltd.

  14. Stability-indicating UPLC method for determination of Valsartan and their degradation products in active pharmaceutical ingredient and pharmaceutical dosage forms.

    Science.gov (United States)

    Krishnaiah, Ch; Reddy, A Raghupathi; Kumar, Ramesh; Mukkanti, K

    2010-11-02

    A simple, precise, accurate stability-indicating gradient reverse phase ultra-performance liquid chromatographic (RP-UPLC) method was developed for the quantitative determination of purity of Valsartan drug substance and drug products in bulk samples and pharmaceutical dosage forms in the presence of its impurities and degradation products. The method was developed using Waters Aquity BEH C18 (100 mm x 2.1 mm, 1.7 microm) column with mobile phase containing a gradient mixture of solvents A and B. The eluted compounds were monitored at 225 nm, the run time was within 9.5 min, which Valsartan and its seven impurities were well separated. Valsartan was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. Valsartan was found to degrade significantly in acid and oxidative stress conditions and stable in base, hydrolytic and photolytic degradation conditions. The degradation products were well resolved from main peak and its impurities, proving the stability-indicating power of the method. The developed method was validated as per international conference on harmonization (ICH) guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness. This method was also suitable for the assay determination of Valsartan in pharmaceutical dosage forms.

  15. A Validated Stability Indicating RP-HPLC Method for the Determination of Emtricitabine, Tenofovir Disoproxil Fumarate, Elvitegravir and Cobicistat in Pharmaceutical Dosage Form

    Science.gov (United States)

    Runja, Chinnalalaiah; Ravi Kumar, Pigili; Avanapu, Srinivasa Rao

    2016-01-01

    A new simple, rapid stability indicating assay method has been developed and validated for the determination of emtricitabine, tenofovir disoproxil fumarate, elvitegravir and cobicistat using reverse-phase high-performance liquid chromatography in their pharmaceutical dosage form. The chromatographic separation was performed on an ODS column (250 × 4.6 mm, 5 µm) using mobile phase A (potassium dihydrogen orthophosphate, pH adjusted to 2.5) and mobile phase B (acetonitrile) in the ratio of 55:45% v/v at a flow rate of 1 mL/min. The analytes were detected at 250 nm. The method was found to be linear in the concentration range of 2–12 µg/mL for EMT, 3–18 µg/mL for TNDF, 1.5–9 µg/mL for ELV and COB, with the coefficient value (R2) of >0.9990. The accuracy was measured via recovery studies and found to be acceptable, and the percentage recoveries were found in the range of 99.93–100.08 ± 0.5%. Forced degradation studies were also conducted, and the drugs were subjected to various stress conditions such as acid hydrolysis, base hydrolysis, oxidative, photolytic and thermal degradation. The proposed method was successfully validated and applied for the quantitative estimation of these drugs in both bulk and tablet dosage forms. PMID:26865655

  16. Die Form der Zeit : [aus "Aja kuju"¡ ("Die Form der Zeit")] : [luuletused] / Doris Kareva ; tlk. Irja Grönholm ja Gisbert Jänicke

    Index Scriptorium Estoniae

    Kareva, Doris, 1958-

    2006-01-01

    Sisu: Die Form der Zeit : "Die lodernde, reglose Sonne..." ; "Was ist, kann ausgedrückt werden..." ; "Ich höre Stunde um Stunde..." ; "Ich ging am Strand entlang..." ; "Um sichtbarer zu leben..." Der beste Teil des Tags ist die Nacht..." ; "Nächte verschreiben sich dem Morgen..." ; "Herb, karg ist das Licht des Nordens..." ; "Alles rotiert, alles pulsiert..." ; "Sprache ist in der Tat das Haus des Seins..." ; "Der Schmetterling, dessen Flügelschlag..." ; "Die blendende, peinlich reine, bodenlose...". Orig.: Aja kuju : "Leekiv liikumatu päike..." ; "See, mis on, on väljendatav..." ; "Kuulan tunde ja tunde..." ; "Kõndisin mere ääres..." ; "Selleks, et elada selgemalt..." ; "Päeva parim osa on öö..." ; "Ööd kirjutavad end hommikuks..." ; "Karm, napp on põhjamaa valgus..." ; "Kõik tiirleb, kõik tuksleb..." ; "Keel on tõesti olemise koda..." ; "Liblikas, kelle tiivalöök..." ; "Lume pimestav, piinavalt puhas..."

  17. Radiation dosage

    Energy Technology Data Exchange (ETDEWEB)

    Finston, Roland [Health Physics, Stanford University, Stanford, CA (United States)

    1986-07-01

    Radiation dosage at Bikini Atoll is the result of current soil contamination, a relic of the nuclear weapons testing program of some 30 years ago. The principal contaminants today and some of their physical properties are listed: cesium-137, strontium-90, plutonium -239, 240 and americium-241. Cobalt-60 contributes less than 1 to the dose and is not considered significant. A resident of the atoll would accumulate radiation dose (rem) in two ways -- by exposure to radiation emanating from the ground and vegetation, and by exposure to radiation released in the spontaneous decay of radionuclides that have entered his body during the ingestion of locally grown foods. The latter process would account for some 90% of the dose; cesium-137 would be responsible for 0 90% of it. Since BARC's method of estimating dosage differs in some respects from that employed by the Lawrence Livermore National Laboratory (LLNL), (Ref.1, LLNL 1982) we are presenting our method in detail. The differences have two sources. First, the numbers used by BARC for the daily ingestion of radionuclides via the diet are higher than LLNL's. Second, BARC's calculation of dose from radionuclide intake utilizes the ICRP system. The net result is that BARC doses are consistently higher than LLNL doses, and in this respect are more conservative.

  18. Radiation dosage

    International Nuclear Information System (INIS)

    Finston, Roland

    1986-01-01

    Radiation dosage at Bikini Atoll is the result of current soil contamination, a relic of the nuclear weapons testing program of some 30 years ago. The principal contaminants today and some of their physical properties are listed: cesium-137, strontium-90, plutonium -239, 240 and americium-241. Cobalt-60 contributes less than 1 to the dose and is not considered significant. A resident of the atoll would accumulate radiation dose (rem) in two ways -- by exposure to radiation emanating from the ground and vegetation, and by exposure to radiation released in the spontaneous decay of radionuclides that have entered his body during the ingestion of locally grown foods. The latter process would account for some 90% of the dose; cesium-137 would be responsible for 0 90% of it. Since BARC's method of estimating dosage differs in some respects from that employed by the Lawrence Livermore National Laboratory (LLNL), (Ref.1, LLNL 1982) we are presenting our method in detail. The differences have two sources. First, the numbers used by BARC for the daily ingestion of radionuclides via the diet are higher than LLNL's. Second, BARC's calculation of dose from radionuclide intake utilizes the ICRP system. The net result is that BARC doses are consistently higher than LLNL doses, and in this respect are more conservative

  19. Development and validation of new analytical methods for simultaneous estimation of Drotaverine hydrochloride in combination with Omeprazole in a pharmaceutical dosage form

    Directory of Open Access Journals (Sweden)

    Smita Sharma

    2017-02-01

    Full Text Available A rapid and precise method (in accordance with ICH guidelines is developed for the quantitative simultaneous determination of Drotaverine hydrochloride and Omeprazole in a combined pharmaceutical dosage form. Three methods are described for the simultaneous determination of Drotaverine hydrochloride and Omeprazole in a binary mixture. The first method was based on UV-Spectrophotometric determination of two drugs, using Vierordt!s simultaneous equation method. It involves absorbance measurement at 226.8 nm (λmax of Drotaverine hydrochloride and 269.4 nm (λmax of Omeprazole in methanol; linearity was obtained in the range of 5–30 μg ml−1 for both the drugs. The second method was based on HPLC separation of the two drugs using potassium dihydrogen phosphate buffer pH 5.0: Acetonitrile: Triethylamine (60:40:0.5, v/v as a mobile phase. Areas were recorded at 260 nm for both the drugs and retention time was found to be 2.71 min. and 3.87 min for Drotaverine hydrochloride and Omeprazole, respectively at 1.0 mL/min flow rate. The selected chromatographic conditions were found to determine Drotaverine hydrochloride and Omeprazole quantitatively in a combined dosage form without any physical separation. The method has been validated for linearity, accuracy and precision. Linearity was found over the range of 5–30 μg mL−1 for both drugs. The third method was based on HPTLC method for simultaneous quantification of these compounds in pharmaceutical dosage forms. Precoated silica gel 60 F254 plate was used as stationary phase. The separation was carried out using Glacial acetic acid:Cyclohexane:Methanol:(80:15:5 v/v/v as mobile phase. The proposed method was found to be fast, accurate, precise, reproducible and rugged and can be used for a simultaneous analysis of these drugs in combined formulations.

  20. A simple spectrophotometric determination of diclofenac sodium in commercial dosage forms using 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ)

    International Nuclear Information System (INIS)

    Raza, A.; Ansari, T.M.; Niazi, S.B.; Bukhari, S.I.H.

    2005-01-01

    A rapid, simple and sensitive spectrophotometric method has been developed for the determination of diclofenac sodium in pure and tablet formulations. The method depends on the charge-transfer complexation between diclofenac sodium as n-electron donor with 2,3-dichloro-,6-dicyano-1,4-benzoquinone (DDQ) in acetonitrile medium as pi-acceptor to give a colored complex which absorbs maximally at 545 nm. Beer's law has been obeyed in the concentration range of 13-275 micro gram ml/sup -1/ with molar absorptivity of 2.5 x 10/sup 3/L mole/sup -1/cm/sup -1/. The proposed method is precise, accurate and specific for routine quantitative analysis of the drug in bulk and dosage forms. (author)

  1. Comparative pharmacokinetic study of dosage forms with morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate

    Directory of Open Access Journals (Sweden)

    I. V. Bushueva

    2014-12-01

    Full Text Available Using mathematical models of income distribution and excretion of drugs greatly enhances the interpretation of the results of biopharmaceutical research. Pharmacokinetic modeling makes it possible to quantify the biological assessment of pharmaceutical factors, opens the possibility of a science-based regulation of the kinetics of substances introduced through targeted changesof pharmaceutical factors. Results of the study of kinetic models are used to solve some practical problems associated with pharmacological and clinical trials of medicines. Morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate is new organic compound from the 1,2,4-triazole group obtained at the Department of Inorganic Chemistry, Zaporozhye State Medical University. The substance has antioxidant and anti-ischemic action, low toxicity. Aim of this work is to study the kinetics of absorption of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate developed formulations. MATERIALS AND METHODS Pharmacokinetic studies of oral and rectal dosage forms of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate was performed on Chinchilla rabbits weighing an average of 2.5 kg, divided into three groups. The third group for comparison was administered a 1% injectable solution of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate intravenously. Substance dose was 0.1 g and 0.5 g per kg of animal body weight, which were administered once. Sampling from the auricular vein of the rabbits was performed at 5, 10, 15, 30, 45, 60, 75, 90, 120, 150 and 180 minutes after oral administration and rectal dosage forms of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate and after 3, 5, 10, 15, 20, 30, 40, 50 and 60 minutes after intravenous injection. Morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate concentration in serum was adjusted spectrophotometrically. Results.Morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio

  2. Simultaneous determination of atorvastatin calcium and ramipril in capsule dosage forms by high-performance liquid chromatography and high-performance thin layer chromatography.

    Science.gov (United States)

    Panchal, Hiral J; Suhagia, Bhanubhai N

    2010-01-01

    Two simple and accurate methods to determine atorvastatin calcium and ramipril in capsule dosage forms were developed and validated using HPLC and HPTLC. The HPLC separation was achieved on a Phenomenex Luna C18 column (250 x 4.6 mm id, 5 microm) in the isocratic mode using 0.1% phosphoric acid-acetonitrile (38 + 62, v/v), pH 3.5 +/- 0.05, mobile phase at a flow rate of 1 ml/min. The retention times were 6.42 and 2.86 min for atorvastatin calcium and ramipril, respectively. Quantification was achieved with a photodiode array detector set at 210 nm over the concentration range of 0.5-5 microg/mL for each, with mean recoveries (at three concentration levels) of 100.06 +/- 0.49% and 99.95 +/- 0.63% RSD for atorvastatin calcium and ramipril, respectively. The HPTLC separation was achieved on silica gel 60 F254 HPTLC plates using methanol-benzene-glacial acetic acid (19.6 + 80.0 + 0.4, v/v/v) as the mobile phase. The Rf values were 0.40 and 0.20 for atorvastatin calcium and ramipril, respectively. Quantification was achieved with UV densitometry at 210 nm over the concentration range of 50-500 ng/spot for each, with mean recoveries (at three concentration levels) of 99.98 +/- 0.75% and 99.87 +/- 0.83% RSD for atorvastatin calcium and ramipril, respectively. Both methods were validated according to International Conference on Harmonization guidelines and found to be simple, specific, accurate, precise, and robust. The mean assay percentages for atorvastatin calcium and ramipril were 99.90 and 99.55% for HPLC and 99.91 and 99.47% for HPTLC, respectively. The methods were successfully applied for the determination of atorvastatin calcium and ramipril in capsule dosage forms without any interference from common excipients.

  3. Simultaneous determination of linagliptin and metformin by reverse phase-high performance liquid chromatography method: An application in quantitative analysis of pharmaceutical dosage forms

    Directory of Open Access Journals (Sweden)

    Prathyusha Vemula

    2015-01-01

    Full Text Available To enhance patient compliance toward treatment in diseases like diabetes, usually a combination of drugs is prescribed. Therefore, an anti-diabetic fixed-dose combination of 2.5 mg of linagliptin 500 mg of metformin was taken for simultaneous estimation of both the drugs by reverse phase-high performance liquid chromatography (RP-HPLC method. The present study aimed to develop a simple and sensitive RP-HPLC method for the simultaneous determination of linagliptin and metformin in pharmaceutical dosage forms. The chromatographic separation was designed and evaluated by using linagliptin and metformin working standard and sample solutions in the linearity range. Chromatographic separation was performed on a C 18 column using a mobile phase of 70:30 (v/v mixture of methanol and 0.05 M potassium dihydrogen orthophosphate (pH adjusted to 4.6 with orthophosphoric acid delivered at a flow rate of 0.6 mL/min and UV detection at 267 nm. Linagliptin and metformin shown linearity in the range of 2-12 μg/mL and 400-2400 μg/mL respectively with correlation co-efficient of 0.9996 and 0.9989. The resultant findings analyzed for standard deviation (SD and relative standard deviation to validate the developed method. The retention time of linagliptin and metformin was found to be 6.3 and 4.6 min and separation was complete in <10 min. The method was validated for linearity, accuracy and precision were found to be acceptable over the linearity range of the linagliptin and metformin. The method was found suitable for the routine quantitative analysis of linagliptin and metformin in pharmaceutical dosage forms.

  4. Pharmaceutical optimization of lipid-based dosage forms for the improvement of taste-masking, chemical stability and solubilizing capacity of phenobarbital.

    Science.gov (United States)

    Monteagudo, Ezequiel; Langenheim, Mariana; Salerno, Claudia; Buontempo, Fabián; Bregni, Carlos; Carlucci, Adriana

    2014-06-01

    Microemulsions (MEs) and self-emulsifying drug delivery systems (SEEDS) containing phenobarbital (Phe) were developed to improve its chemical stability, solubilizing capacity and taste-masking in oral liquid dosage forms. Cremophor® RH40 and Labrasol® were used as surfactants for the screening of ME regions, Capmul® MCM L, Captex® 355, Imwitor® 408, Myglyol® 840 and Isopropyl myristate were the oil phases assayed; Transcutol® P, Polyethylene-glycol 400, glycerol, Propylene-glycol and ethanol the cosurfactants. Phe stability assay was carried out (20:4:20:56% and 20:4:35:41% (w/w); surfactant:oily phase:cosurfactant:water) for both surfactants; only one containing ethanol showed significant dismissing in its drug content. Solubility capacity for these selected formulations were also evaluated, an amount between 17 and 58 mg/mL of Phe could be loaded. At last, an optimized ME formulation with Cremophor® RH40 20%, Capmul® MCM L 4%, PEG 400 35% and sucralose 2% (w/w) was chosen in order to optimize taste-masking using an electronic tongue. Strawberry along with banana and tutti-frutti flavors plus mint flavor proved to be the best ones. Labrasol-based pre-concentrates were tested for (micro)emulsifying properties; all of them resulted to behave as SEDDS. In summary, a rationale experimental design conducted to an optimized ME for Phe oral pediatric administration which was able to load 5-fold times the currently used dose (4 mg/mL), with no sign of physical or chemical instability and with improved taste; SEDDS for capsule filling were also obtained. The biopharmaceutical advantages described for these dosage forms encourage furthering in vivo evaluation.

  5. A Stability-Indicating HPLC-DAD Method for Determination of Stiripentol: Development, Validation, Kinetics, Structure Elucidation and Application to Commercial Dosage Form

    Directory of Open Access Journals (Sweden)

    Hany W. Darwish

    2014-01-01

    Full Text Available A rapid, simple, sensitive, and accurate isocratic reversed-phase stability-indicating high performance liquid chromatography method has been developed and validated for the determination of stiripentol and its degradation product in its bulk form and pharmaceutical dosage form. Chromatographic separation was achieved on a Symmetry C18 column and quantification was achieved using photodiode array detector (DAD. The method was validated in accordance with the ICH requirements showing specificity, linearity (r2=0.9996, range of 1–25 μg/mL, precision (relative standard deviation lower than 2%, accuracy (mean recovery 100.08±1.73, limits of detection and quantitation (LOD = 0.024 and LOQ = 0.081 μg/mL, and robustness. Stiripentol was subjected to various stress conditions and it has shown marked stability under alkaline hydrolytic stress conditions, thermal, oxidative, and photolytic conditions. Stiripentol degraded only under acidic conditions, forming a single degradation product which was well resolved from the pure drug with significantly different retention time values. This degradation product was characterized by 1H-NMR and 13C-NMR spectroscopy as well as ion trap mass spectrometry. The results demonstrated that the method would have a great value when applied in quality control and stability studies for stiripentol.

  6. Development and Validation of a Rapid RP-HPLC Method for the Determination of Venlafaxine Hydrochloride in Pharmaceutical Dosage forms using Experimental Design

    Directory of Open Access Journals (Sweden)

    Vanita Somasekhar

    2009-01-01

    Full Text Available The objective of the current study was to develop a simple, accurate, precise and rapid reversed-phase HPLC method and subsequent validation as per ICH guidelines for the determination of venlafaxine hydrochloride in pharmaceutical dosage forms. The proposed RP-HPLC method utilizes a 5 μm Varian® Microsorb-MV 100 C18 column (250 mmx4.6 mm at ambient temperature. A 23 factorial design consisting of 3 factors at 2 levels was set up to standardize the chromatographic conditions. A numerical optimization technique employing the desirability approach was used to locate the optimum chromatographic conditions. The optimum mobile phase consisted of acetonitrile, 0.04 M potassium dihydrogen phosphate buffer and methanol (45:25:30, v/v, with pH adjusted to 5.5 using 10% phosphoric acid solution. The mobile phase was delivered isocratically at a flow rate of 1 mL/min with UV detection at 224 nm. The calibration plots constructed using the optimized chromatographic conditions displayed good linear relationship in the concentration range of 1-50 μg/mL with r=0.9992. The method was validated for precision, accuracy, robustness and recovery. The minimum detectable and minimum quantifiable amounts were found to be 0.568 and 1.72 μg/mL, respectively and the method was found to be reproducible from the statistical data generated. Venlafaxine hydrochloride was eluted at 3.43 min

  7. Transforming lipid-based oral drug delivery systems into solid dosage forms: an overview of solid carriers, physicochemical properties, and biopharmaceutical performance.

    Science.gov (United States)

    Tan, Angel; Rao, Shasha; Prestidge, Clive A

    2013-12-01

    The diversity of lipid excipients available commercially has enabled versatile formulation design of lipid-based drug delivery systems for enhancing the oral absorption of poorly water-soluble drugs, such as emulsions, microemulsions, micelles, liposomes, niosomes and various self-emulsifying systems. The transformation of liquid lipid-based systems into solid dosage forms has been investigated for several decades, and has recently become a core subject of pharmaceutical research as solidification is regarded as viable means for stabilising lipid colloidal systems while eliminating stringent processing requirements associated with liquid systems. This review describes the types of pharmaceutical grade excipients (silica nanoparticle/microparticle, polysaccharide, polymer and protein-based materials) used as solid carriers and the current state of knowledge on the liquid-to-solid conversion approaches. Details are primarily focused on the solid-state physicochemical properties and redispersion capacity of various dry lipid-based formulations, and how these relate to the in vitro drug release and solubilisation, lipid carrier digestion and cell permeation performances. Numerous in vivo proof-of-concept studies are presented to highlight the viability of these dry lipid-based formulations. This review is significant in directing future research work in fostering translation of dry lipid-based formulations into clinical applications.

  8. Optimization of Forced Degradation Using Experimental Design and Development of a Stability-Indicating Liquid Chromatographic Assay Method for Rebamipide in Bulk and Tablet Dosage Form

    Directory of Open Access Journals (Sweden)

    Sandeep SONAWANE

    2016-09-01

    Full Text Available A novel stability-indicating RP-HPLC assay method was developed and validated for quantitative determination of rebamipide in bulk and tablet dosage form. Rebamipide (drug and drug product solutions were exposed to acid and alkali hydrolysis, thermal stress, oxidation by hydrogen peroxide and photodegradation. Experimental design has been used during forced degradation to determine significant factors responsible for degradation and to obtain optimal degradation conditions. In addition, acid and alkali hydrolysis was performed using a microwave oven. The chromatographic method employed the HiQ sil C-18HS (250 × 4.6 mm; 5 μm column with mobile phase consisting of 0.02 M potassium phosphate (pH adjusted to 6.8 and methanol (40:60, v/v and the detection was performed at 230 nm. The procedure was validated for specificity, linearity, accuracy, precision and robustness. There was no interference observed of excipients and degradation products in the determination of the active pharmaceutical ingredient. The method showed good accuracy and precision (intra and inter day and the response was linear in a range from 0.5 to 5 μg mL−1. The method was found to be simple and fast with less trial and error experimentation by making use of experimental design. Also, it proved that microwave energy can be used to expedite hydrolysis of rebamipide.

  9. A Localized Surface Plasmon Resonance Sensing Method for Simultaneous Determination of Atenolol and Amiloride in Pharmaceutical Dosage Forms and Urine Samples

    Directory of Open Access Journals (Sweden)

    Marwa R. El-Zahry

    2018-01-01

    Full Text Available This contribution describes a simple, fast, and sensitive application of localized surface plasmon resonance effect of silver nanoparticles for simultaneous determination of antihypertensive drugs’ mixture atenolol and amiloride in both pharmaceutical dosage forms and in biological samples (urine. Silver nanoparticles were prepared by chemical reduction of silver nitrate using hydroxylamine HCL in an alkaline medium. Application of silver-hydroxylamine nanoparticles (SH NPs provides many advantages including reproducibility, sensitivity, and cost effective way of analyte determination. Amiloride has four amino groups which act as attachment points on the surface of silver nanoparticles resulting in a synergistic effect on the absorption intensity of atenolol, leading to increase the sensitivity of the determination of both compounds. This method shows excellent advantages comparing with the previously reported methods, including accuracy, precision, and selectivity. The linear range of atenolol is 1 × 10−5–1 × 10−4 mol·L−1 and of amiloride is 1 × 10−6–1 × 10−5 mol·L−1. The limit of detection (LOD values of atenolol and amiloride are 0.89 × 10−5 and 0.42 × 10−6 mol·L−1, respectively.

  10. A Simple and Specific Stability- Indicating RP-HPLC Method for Routine Assay of Adefovir Dipivoxil in Bulk and Tablet Dosage Form.

    Science.gov (United States)

    Darsazan, Bahar; Shafaati, Alireza; Mortazavi, Seyed Alireza; Zarghi, Afshin

    2017-01-01

    A simple and reliable stability-indicating RP-HPLC method was developed and validated for analysis of adefovir dipivoxil (ADV).The chromatographic separation was performed on a C 18 column using a mixture of acetonitrile-citrate buffer (10 mM at pH 5.2) 36:64 (%v/v) as mobile phase, at a flow rate of 1.5 mL/min. Detection was carried out at 260 nm and a sharp peak was obtained for ADV at a retention time of 5.8 ± 0.01 min. No interferences were observed from its stress degradation products. The method was validated according to the international guidelines. Linear regression analysis of data for the calibration plot showed a linear relationship between peak area and concentration over the range of 0.5-16 μg/mL; the regression coefficient was 0.9999and the linear regression equation was y = 24844x-2941.3. The detection (LOD) and quantification (LOQ) limits were 0.12 and 0.35 μg/mL, respectively. The results proved the method was fast (analysis time less than 7 min), precise, reproducible, and accurate for analysis of ADV over a wide range of concentration. The proposed specific method was used for routine quantification of ADV in pharmaceutical bulk and a tablet dosage form.

  11. Analytical Method Development and Validation for the Simultaneous Estimation of Abacavir and Lamivudine by Reversed-phase High-performance Liquid Chromatography in Bulk and Tablet Dosage Forms.

    Science.gov (United States)

    Raees Ahmad, Sufiyan Ahmad; Patil, Lalit; Mohammed Usman, Mohammed Rageeb; Imran, Mohammad; Akhtar, Rashid

    2018-01-01

    A simple rapid, accurate, precise, and reproducible validated reverse phase high performance liquid chromatography (HPLC) method was developed for the determination of Abacavir (ABAC) and Lamivudine (LAMI) in bulk and tablet dosage forms. The quantification was carried out using Symmetry Premsil C18 (250 mm × 4.6 mm, 5 μm) column run in isocratic way using mobile phase comprising methanol: water (0.05% orthophosphoric acid with pH 3) 83:17 v/v and a detection wavelength of 245 nm and injection volume of 20 μl, with a flow rate of 1 ml/min. In the developed method, the retention times of ABAC and LAMI were found to be 3.5 min and 7.4 min, respectively. The method was validated in terms of linearity, precision, accuracy, limits of detection, limits of quantitation, and robustness in accordance with the International Conference on Harmonization guidelines. The assay of the proposed method was found to be 99% - 101%. The recovery studies were also carried out and mean % recovery was found to be 99% - 101%. The % relative standard deviation from reproducibility was found to be performance liquid chromatography, UV: Ultraviolet, ICH: International Conference on Harmonization, ABAC: Abacavir, LAMI: Lamivudine, HIV: Human immunodeficiency virus, AIDS: Acquired immunodeficiency syndrome, NRTI: Nucleoside reverse transcriptase inhibitors, ARV: Antiretroviral, RSD: Relative standard deviation, RT: Retention time, SD: Standard deviation.

  12. Polymer adhesion predictions for oral dosage forms to enhance drug administration safety. Part 2: In vitro approach using mechanical force methods.

    Science.gov (United States)

    Drumond, Nélio; Stegemann, Sven

    2018-06-01

    Predicting the potential for unintended adhesion of solid oral dosage forms (SODF) to mucosal tissue is an important aspect that should be considered during drug product development. Previous investigations into low strength mucoadhesion based on particle interactions methods provided evidence that rheological measurements could be used to obtain valid predictions for the development of SODF coatings that can be safely swallowed. The aim of this second work was to estimate the low mucoadhesive strength properties of different polymers using in vitro methods based on mechanical forces and to identify which methods are more precise when measuring reduced mucoadhesion. Another aim was to compare the obtained results to the ones achieved with in vitro particle interaction methods in order to evaluate which methodology can provide stronger predictions. The combined results correlate between particle interaction methods and mechanical force measurements. The polyethylene glycol grades (PEG) and carnauba wax showed the lowest adhesive potential and are predicted to support safe swallowing. Hydroxypropyl methylcellulose (HPMC) along with high molecular grades of polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA) exhibited strong in vitro mucoadhesive strength. The combination of rheological and force tensiometer measurements should be considered when assessing the reduced mucoadhesion of polymer coatings to support safe swallowing of SODF. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. Use of Activated Carbon in Packaging to Attenuate Formaldehyde-Induced and Formic Acid-Induced Degradation and Reduce Gelatin Cross-Linking in Solid Dosage Forms.

    Science.gov (United States)

    Colgan, Stephen T; Zelesky, Todd C; Chen, Raymond; Likar, Michael D; MacDonald, Bruce C; Hawkins, Joel M; Carroll, Sophia C; Johnson, Gail M; Space, J Sean; Jensen, James F; DeMatteo, Vincent A

    2016-07-01

    Formaldehyde and formic acid are reactive impurities found in commonly used excipients and can be responsible for limiting drug product shelf-life. Described here is the use of activated carbon in drug product packaging to attenuate formaldehyde-induced and formic acid-induced drug degradation in tablets and cross-linking in hard gelatin capsules. Several pharmaceutical products with known or potential vulnerabilities to formaldehyde-induced or formic acid-induced degradation or gelatin cross-linking were subjected to accelerated stability challenges in the presence and absence of activated carbon. The effects of time and storage conditions were determined. For all of the products studied, activated carbon attenuated drug degradation or gelatin cross-linking. This novel use of activated carbon in pharmaceutical packaging may be useful for enhancing the chemical stability of drug products or the dissolution stability of gelatin-containing dosage forms and may allow for the 1) extension of a drug product's shelf-life when the limiting attribute is a degradation product induced by a reactive impurity, 2) marketing of a drug product in hotter and more humid climatic zones than currently supported without the use of activated carbon, and 3) enhanced dissolution stability of products that are vulnerable to gelatin cross-linking. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  14. Validated RP-HPLC Method for the Assay of Etoricoxib (A Non-Steroidal Anti-Inflammatory Drug in Pharmaceutical Dosage Forms

    Directory of Open Access Journals (Sweden)

    Srinivasu Topalli

    2012-01-01

    Full Text Available A simple, accurate, sensitive and reproducible reverse phase high performance liquid chromatographic method has been developed for the quantitative determination of Etoricoxib in pharmaceutical dosage forms. The assay was performed on Hypersil ODS C-18 (250 x 4.6 mm., 5µm particle size column using acetonitrile and potassium dihydrogen phosphate buffer (pH 4.2 (46:54 % v/v as mobile phase with UV detection at 280 nm (flow rate 1.2 ml/min. Bromhexine was used as an internal standard. Quantization was achieved by measurement of the peak area ratio of the drug to the internal standard. The limit of detection (LOD and the limit of quantification (LOQ were 0.0704 µg ml-1 and 0.2134 µg ml-1 respectively. Each analysis required no longer than 10 minutes. The calibration curve was linear over the concentration range from 0.5-85.0 µg ml-1. The retention times of Etoricoxib and Bromhexine were found to be 3.083 and 7.631 minutes respectively. The proposed method was validated according to the ICH guidelines and can be used successfully to analyse marketed formulations.

  15. Stability-Indicating RP-UPLC Method for the Simultaneous Determination of Potential Degradation and Process Impurities of Amlodipine Basylate and Benazepril HCl in Pharmaceutical Dosage Form

    Directory of Open Access Journals (Sweden)

    Gajanan B. Kasawar

    2014-10-01

    Full Text Available A stability-indicating RP-UPLC method was developed for the quantification of related impurities of amlodipine basylate (AB and Benazepril hydrochloride (BH in solid pharmaceutical dosages form. The chromatographic separation employs a C18 column using a gradient elution, being solvent-A (1.36 g of potassium dihydrogen phosphate dissolved in one liter of water, adjusted to pH 3.0 with orthophosphoric acid and solvent-B (acetonitrile delivered at a flow rate of 0.3 mL min-1. The analytes were detected and quantified at 217 nm and 240 nm using photo diode-array detector. The method was validated demonstrating to be accurate and precise within the corresponding linear range of all components. The stability of the method was investigated under different stress conditions including hydrolytic, oxidative, exposed to photolytic, humidity and thermal as recommended by ICH guidelines. Relevant degradation was found under hydrolytic and oxidative conditions. Robustness against small modification in mobile phase pH, column oven temperature, flow rate and percentage of the mobile phase composition was ascertained. Lower limit of quantification and detection was also determined. The peak purity indices (purity angle < purity threshold obtained with the aid of PDA detector and satisfactory resolution between related impurities established the specificity of the determination.

  16. Matrix effect on leaching of Bisphenol A diglycidyl ether (BADGE) from epoxy resin based inner lacquer of aluminium tubes into semi-solid dosage forms.

    Science.gov (United States)

    Lipke, Uwe; Haverkamp, Jan Boris; Zapf, Thomas; Lipperheide, Cornelia

    2016-04-01

    To study the impact of different semi-solid dosage form components on the leaching of Bisphenol A (BPA) and Bisphenol A diglycidyl ether (BADGE) from the epoxy resin-based inner lacquer of aluminium tubes, the tubes were filled with different matrix preparations and stored at an elevated temperature. Despite compliance with the European Standards EN 15348 and EN 15766 on porosity and polymerisation of internal coatings of aluminium tubes, the commercially available tubes used in the study contained an increased amount of polymerisation residues, such as unbound BPA, BADGE and BADGE derivatives in the lacquer, as determined by acetonitrile extraction. Storage of Macrogol ointments in these tubes resulted in an almost quantitative migration of the unbound polymerisation residues from the coating into the ointment. In addition, due to alterations observed in the RP-HPLC chromatograms of the matrix spiked with BADGE and BADGE derivatives it is supposed that the leachates can react with formulation components. The contamination of the medicinal product by BPA, BADGE and BADGE derivatives can be precluded by using aluminium tubes with an internal lacquer with a low degree of unbound polymerisation residues. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  17. Development and Validation of a Precise, Single HPLC Method for the Determination of Tolperisone Impurities in API and Pharmaceutical Dosage Forms.

    Science.gov (United States)

    Raju, Thummala Veera Raghava; Seshadri, Raja Kumar; Arutla, Srinivas; Mohan, Tharlapu Satya Sankarsana Jagan; Rao, Ivaturi Mrutyunjaya; Nittala, Someswara Rao

    2013-01-01

    A novel, sensitive, stability-indicating HPLC method has been developed for the quantitative estimation of Tolperisone-related impurities in both bulk drugs and pharmaceutical dosage forms. Effective chromatographic separation was achieved on a C18 stationary phase with a simple mobile phase combination delivered in a simple gradient programme, and quantitation was by ultraviolet detection at 254 nm. The mobile phase consisted of a buffer and acetonitrile delivered at a flow rate 1.0 ml/min. The buffer consisted of 0.01 M potassium dihydrogen phosphate with the pH adjusted to 8.0 by using diethylamine. In the developed HPLC method, the resolution between Tolperisone and its four potential impurities was found to be greater than 2.0. Regression analysis showed an R value (correlation coefficient) of greater than 0.999 for the Tolperisone impurities. This method was capable of detecting all four impurities of Tolperisone at a level of 0.19 μg/mL with respect to the test concentration of 1000 μg/mL for a 10 µl injection volume. The tablets were subjected to the stress conditions of hydrolysis, oxidation, photolysis, and thermal degradation. Considerable degradation was found to occur in base hydrolysis, water hydrolysis, and oxidation. The stress samples were assayed against a qualified reference standard and the mass balance was found to be close to 100%. The established method was validated and found to be linear, accurate, precise, specific, robust, and rugged.

  18. Brand versus generic dispensing trend for ciprofloxacin 500 mg, levofloxacin 500 mg, and moxifloxacin 400 mg (oral dosage forms) among pharmacies of Karachi, Pakistan.

    Science.gov (United States)

    Zehra, Fatima; Naqvi, Atta Abbas; Tasneem, Sumbul; Ahmad, Rizwan; Ahmad, Niyaz; Shamsi, Adnan Zia; Asghar, Naqiya Ali; Khan, Ghufran Ullah

    2017-01-01

    Pakistan spends 0.7% of its gross domestic product on health. The public sector health-care system provides services to 22% of population thus paving the way for a dominant private sector. Patients in Pakistan mostly pay their medical expenses directly, and 64% of the health expenditures are borne by the household. Expenditure on medicine constitutes 43% of the total household expenditure. A quantitative cross-sectional study was conducted in Karachi, Pakistan, for a month. It was aimed at gathering response from different pharmacies to understand the brand versus generic dispensing trend of ciprofloxacin 500 mg, levofloxacin 500 mg, and moxifloxacin 400 mg oral dosage forms. The study employed convenience sampling and used a survey checklist. The data gathered was entered in SPSS version 22. The mean price per tablet for ciprofloxacin brand and generic was reported at Pakistani Rupees (PKR) 48.44 and PKR 26.85, respectively. The trend for dispensing ciprofloxacin highlighted a split in the market between brand (51%) and generic (49%). For levofloxacin brand and generic, the price per tablet was reported at PKR 36.50 and PKR 36.15 respectively, and despite same price, the market was dominated by generic levofloxacin (92%). Due to a price difference between brand and generic moxifloxacin, i.e., PKR 129.44 and PKR 71.91, respectively, the market was mostly occupied by the generic form (75%). Pricing mechanism must be revisited, and the authorities should take stern actions against any illegitimate price hike. The surging burden of drug expenditure on poorer sections of the society must be addressed by the government on an urgent basis.

  19. A study of knowledge, attitude and practice regarding administration of pediatric dosage forms and allied health literacy of caregivers for children

    Directory of Open Access Journals (Sweden)

    Amrita Sil

    2017-01-01

    Full Text Available Context: Caregivers of sick children have to be careful with medicine dosing and giving medicines to a reluctant child can be challenging. Aim: To assess the knowledge, attitude, and practices of caregivers regarding pediatric medicine administration and health literacy allied to this task. Settings and Design: This cross-sectional study was carried out on outpatient and inpatient basis in the pediatrics department of a teaching hospital over 6 months. Subjects and Methods: Data regarding sociodemographic profile of patient and caregiver, idea regarding pediatric dosage forms, dosing of medicines, and medication errors during administration were recorded from 377 caregivers. Reconstitution of dry powder and measurement of 5 mL liquid medicine using measuring cup of the medicine phial was demonstrated by the caregivers. Statistical Analysis: Association assessed by point biserial correlation and Spearman's rank correlation. Results: Majority of the primary caregivers surveyed were young, educated, homemaker mothers. Liquid medicines were used maximally (88.9%. Majority (87.3% of the caregivers used standardized dosing instruments to measure liquids and reconstitution (85.9%, and teaspoon measurement task (91% was performed satisfactorily by most. Some potentially wrong practices (e.g., adding medicine to milk, redilution of reconstituted medicine, and storing beyond the recommended period were recorded. Medication errors were reported by 44.5% caregivers, significantly more in the outpatient setting. Although the statistical correlation was weak, the chance of medication error was less, and the precision of measurement was better with increasing education of the caregiver. Conclusions: Physicians need to be aware of the limitations of knowledge and the possibility of wrong administration practices among caregivers of children. Remedial measures in this regard can reduce the risk of medication errors.

  20. Simultaneous determination of related substances of telmisartan and hydrochlorothiazide in tablet dosage form by using reversed phase high performance liquid chromatographic method

    Directory of Open Access Journals (Sweden)

    Sutirtho Mukhopadhyay

    2011-01-01

    Full Text Available Objective : Telmisartan is a potent, long-lasting, nonpeptide antagonist of the angiotensin II type-1 (AT 1 receptor that is indicated for the treatment of essential hypertension. Hydrochlorothiazide is a widely prescribed diuretic and it is indicated for the treatment of edema, control of essential hypertension and management of diabetes insipidus. In the current article a new, accurate, sensitive, precise, rapid, reversed phase high performance liquid chromatography (RP-HPLC method was developed for determination of related substances of Telmisartan and Hydrochlorthiazide in tablet dosage form. Materials and Methods : Simultaneous determination of related substances was performed on Kromasil C 18 analytical column (250 × 4.6 mm; 5΅m pertical size column at 40°C employing a gradient elution. Mobile phase consisting of solvent A (solution containing 2.0 g of potassium dihydrogen phosphate anhydrous and 1.04 g of Sodium 1- Hexane sulphonic acid monohydrate per liter of water, adjusted to pH 3.0 with orthophosphoric acid and solvent B (mixture of Acetonitrile: Methanol in the ratio 80:20 v/v was used at a flow rate of 1.0 ml min−1 . UV detection was performed at 270 nm. Results : During method validation parameter such as precision, linearity, accuracy, specificity, limit of detection and quantification were evaluated, which remained within acceptable limits. Conclusions : HPLC analytical method is linear, accurate, precise, robust and specific, being able to separate the main drug from its degradation products. It may find application for the routine analysis of the related substances of both Telmisartan and Hydrochlorthiazide in this combination tablets.

  1. A Study of Method Development, Validation, and Forced Degradation for Simultaneous Quantification of Paracetamol and Ibuprofen in Pharmaceutical Dosage Form by RP-HPLC Method

    Directory of Open Access Journals (Sweden)

    Md. Sarowar Jahan

    2014-01-01

    Full Text Available A rapid and stability-indicating reversed phase high-performance liquid chromatography (RP-HPLC method was developed for simultaneous quantification of paracetamol and ibuprofen in their combined dosage form especially to get some more advantages over other methods already developed for this combination. The method was validated according to United States Pharmacopeia (USP guideline with respect to accuracy, precision, specificity, linearity, solution stability, robustness, sensitivity, and system suitability. Forced degradation study was validated according to International Conference on Harmonisation (ICH. For this, an isocratic condition of mobile phase comprising phosphate buffer (pH 6.8 and acetonitrile in a ratio of 65:35, v/v at a flow rate of 0.7 mL/minute over RP C18 (octadecylsilane (ODS, 150 × 4.6 mm, 5 μm, Phenomenex Inc. column at ambient temperature was maintained. The method showed excellent linear response with correlation coefficient ( R 2 values of 0.999 and 1.0 for paracetamol and ibuprofen respectively, which were within the limit of correlation coefficient ( R 2 > 0.995. The percent recoveries for two drugs were found within the acceptance limit of (97.0-103.0%. Intra-and inter-day precision studies of the new method were less than the maximum allowable limit percentage of relative standard deviation (%RSD ≤ 2.0. Forced degradation of the drug product was carried out as per the ICH guidelines with a view to establishing the stability-indicating property of this method and providing useful information about the degradation pathways, degradation products, and how the quality of a drug substance and drug product changes with time under the influence of various stressing conditions. The degradation of ibuprofen was within the limit (5-20%, according to the guideline of ICH, while paracetamol showed <20% degradation in oxidation and basic condition.

  2. A Study of Method Development, Validation, and Forced Degradation for Simultaneous Quantification of Paracetamol and Ibuprofen in Pharmaceutical Dosage Form by RP-HPLC Method.

    Science.gov (United States)

    Jahan, Md Sarowar; Islam, Md Jahirul; Begum, Rehana; Kayesh, Ruhul; Rahman, Asma

    2014-01-01

    A rapid and stability-indicating reversed phase high-performance liquid chromatography (RP-HPLC) method was developed for simultaneous quantification of paracetamol and ibuprofen in their combined dosage form especially to get some more advantages over other methods already developed for this combination. The method was validated according to United States Pharmacopeia (USP) guideline with respect to accuracy, precision, specificity, linearity, solution stability, robustness, sensitivity, and system suitability. Forced degradation study was validated according to International Conference on Harmonisation (ICH). For this, an isocratic condition of mobile phase comprising phosphate buffer (pH 6.8) and acetonitrile in a ratio of 65:35, v/v at a flow rate of 0.7 mL/minute over RP C18 (octadecylsilane (ODS), 150 × 4.6 mm, 5 μm, Phenomenex Inc.) column at ambient temperature was maintained. The method showed excellent linear response with correlation coefficient (R (2)) values of 0.999 and 1.0 for paracetamol and ibuprofen respectively, which were within the limit of correlation coefficient (R (2) > 0.995). The percent recoveries for two drugs were found within the acceptance limit of (97.0-103.0%). Intra-and inter-day precision studies of the new method were less than the maximum allowable limit percentage of relative standard deviation (%RSD) ≤ 2.0. Forced degradation of the drug product was carried out as per the ICH guidelines with a view to establishing the stability-indicating property of this method and providing useful information about the degradation pathways, degradation products, and how the quality of a drug substance and drug product changes with time under the influence of various stressing conditions. The degradation of ibuprofen was within the limit (5-20%, according to the guideline of ICH), while paracetamol showed degradation in oxidation and basic condition.

  3. Stability indicating RP-HPLC method development and validation for the simultaneous determination of aminexil and minoxidil in pharmaceutical dosage form.

    Science.gov (United States)

    Siddiraju, S; Sahithi, M

    2015-03-01

    The objective of the present work is to develop stability indicating high-performance liquid chromatographic method for the simultaneous determination of aminexil and minoxidil in pharmaceutical dosage form. The chromatographic separation was achieved with BDS Hypersil C18 column (250 mm×4.6 mm×5 μ) as stationary phase and phosphate buffer and acetonitrile (78:22) as mobile phase. The method was employed by using a flow rate of 1.1 mL/min kept at 30°C. The detection wavelength was kept at 238 nm by using photo-diode array detector. The retention times of the aminexil and minoxidil were found to be 2.3 min and 3.9 min, respectively. The method developed was validated in accordance with ICH guidelines with respect to the stability indicating capacity of the method including system suitability, accuracy, precision, linearity, range, limit of detection, limit of quantification and robustness. The linearity responses of aminexil and minoxidil were found to be in the concentration ranges of 18.75-112.5 μg/mL and 25-150 μg/mL, respectively. The LOD and LOQ values for aminexil were found to be 0.31 and 0.92 μg/mL and minoxidil were found to be 0.03 and 0.10 μg/mL respectively. The percentage recoveries for both the drugs were found in the range of 98-101%. This method is accurate, precise and sensitive; hence, it can be employed for routine quality control of aminexil and minoxidil in pharmaceutical industries and drug testing laboratories. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  4. Simultaneous determination of nortriptyline hydrochloride and fluphenazine hydrochloride in microgram quantities from low dosage forms by liquid chromatography–UV detection

    Directory of Open Access Journals (Sweden)

    Safwan Ashour

    2012-12-01

    Full Text Available A novel method for the simultaneous high-performance liquid chromatographic determination of nortriptyline hydrochloride and fluphenazine hydrochloride was developed and validated. Fluvastatin sodium was used as internal standard. The determination was performed on a Hypersil Gold C8 column (250 mm × 4.6 mm i.d., 5 μm particle size at 25 °C; the mobile phase, consisting of a mixture of formic acid (0.1 M, pH 2.16-methanol (33:67, v/v, was delivered at a flow rate of 1.1 mL/min and detector wavelength at 251 nm. The retention time of nortriptyline, fluphenazine and fluvastatin was found to be 5.11, 8.05 and 11.38 min, respectively. Linearity ranges were 5.0–1350.0 and 10.0–1350.0 μg/mL with limit of detection values of 0.72 and 0.31 μg/mL, for nortriptyline and fluphenazine, respectively. Results of assay and recovery studies were statistically evaluated for its accuracy and precision. Correlation coefficients (r2 of the regression equations were greater than 0.999 in all cases. According to the validation results, the proposed method was found to be specific, accurate, precise and could be applied to the simultaneous quantitative analysis of nortriptyline and fluphenazine. Keywords: Nortriptyline hydrochloride, Fluphenazine hydrochloride, Liquid chromatography, Pharmaceutical dosage form

  5. Development and validation of RP-HPLC method for determination of famotidine and its application in quality control of different pharmaceutical dosage forms

    International Nuclear Information System (INIS)

    Hassan, S.S.; Ayub, M.; Ishtiaq, S.; Ahmad; I; Khalid, N.

    2013-01-01

    A precise and fast novel high-performance liquid chromatography method was developed and validated for the quantitative determination of Famotidine (FMT) in commercially available pharmaceutical dosage forms. An Agilent 1200 Series High Performance Liquid Chromatography (HPLC) system having the column C 1 8 (5 micro m particle size, 150*4.6 mm) was used in this study and detection (diode array detector) was made at 280 nm. The mobile phase was acetonitrile, distilled water, triethylamine and phosphoric acid (49.9:49.9:0.1:0.1, v/v), isocratic elution under ambient temperature at flow rate of 1.5 mL min/sup -1/ with injection volume 5 micro L. In this method, the retention times for FMT pure, tablets and suspension were 0.787 min, 0.789 min and 0.839 minutes respectively. The new method was validated by different validation parameters. The procedure provided a linear response over the concentration range of 0.1-1.0 mg mL/sup -1/ (r/sup 2/ =0.998) and equation was y=3902.6+18.651. The mean % recovery for inter-day (96.56%) and intra-day (97.36%) assuring a good precision and accuracy was 96-98%. The method was found to be very rapid and the overall assay time was less than 2 minutes and the results obtained were accurate, precise and selective enough to allow the determination of FMT in the presence of certain excipients. (author)

  6. Development of a stability-indicating UPLC method for determining olanzapine and its associated degradation products present in active pharmaceutical ingredients and pharmaceutical dosage forms.

    Science.gov (United States)

    Krishnaiah, Ch; Vishnu Murthy, M; Kumar, Ramesh; Mukkanti, K

    2011-03-25

    A simple, sensitive and reproducible ultra performance liquid chromatography (UPLC) coupled with a photodiode array detector method was developed for the quantitative determination of olanzapine (OLN) in API and pharmaceutical dosage forms. The method is applicable to the quantification of related substances and assays of drug substances. Chromatographic separation was achieved on Acquity UPLC BEH 100-mm, 2.1-mm, and 1.7-μm C-18 columns, and the gradient eluted within a short runtime, i.e., within 10.0 min. The eluted compounds were monitored at 250 nm, the flow rate was 0.3 mL/min, and the column oven temperature was maintained at 27°C. The resolution of OLN and eight (potential, bi-products and degradation) impurities was greater than 2.0 for all pairs of components. The high correlation coefficient (r(2)>0.9991) values indicated clear correlations between the investigated compound concentrations and their peak areas within the test ranges. The repeatability and intermediate precision, expressed by the RSD, were less than 2.4%. The accuracy and validity of the method were further ascertained by performing recovery studies via a spike method. The accuracy of the method expressed as relative error was satisfactory. No interference was observed from concomitant substances normally added to the tablets. The drug was subjected to the International Conference on Harmonization (ICH)-prescribed hydrolytic, oxidative, photolytic and thermal stress conditions. The performance of the method was validated according to the present ICH guidelines for specificity, limit of detection, limit of quantification, linearity, accuracy, precision, ruggedness and robustness. Copyright © 2010 Elsevier B.V. All rights reserved.

  7. Grænsestrategier og transnationale relationer

    DEFF Research Database (Denmark)

    Eilenberg, Michael

    2006-01-01

    I denne artikel ønsker jeg at undersøge betydningen af transnationale etniske relationer for den indonesiske ibanske befolkning, der er bosat i grænselandet, mellem den malaysiske delstat, Sarawak og den indonesiske provins, Vest Kalimantan. Jeg vil diskutere hvordan transnationale etniske...... disse processer, som de kommer til udtryk i form af bl.a. arbejdsmigration på tværs af den internationale grænse til Sarawak, Malaysia. Udgivelsesdato: Juli...

  8. Low cost technology for the rapid and safe in-house (hospital-based) preparation of dual - radiotherapeutic (Rx) and radiodiagnostic (Dx) - dosage forms of high specific activity 131I-mIBG for clinical application

    International Nuclear Information System (INIS)

    Noronha, O.P.D.; Sonawane, G.A.; Samuel, A.M.

    1998-01-01

    Radioiodinated mIBG is finding increasing utility in nuclear medicine. However, its widespread use in developing countries is precluded by logistic constraints owing to the relative instability of the labelled molecule with respect to time and temp., and high costs. This prompted us to develop a low cost in-house batch process technology that could be used for the small-scale preparation of 131 I-mIBG even in a less equipped hospital-based radiopharmacy. The production of large amounts of 131 I-mIBG for clinical use requires sophisticated infrastructure (a scarce resource) to contain / safeguard against internal and external radiation exposures. We have indigenously designed a semi-automated, self-shielded, remote-controlled and safe microplant + process assemblies using easily accessible and cheap inputs, and developed the complete technology for the rapid and safe production of dual dosage forms of 131 I-mIBG, a radiotherapeutic (R x ) single dosage form of high activity along with 1-3 low activity radiodiagnostics (D x ) as multidosage forms. The radioiodide exchange reaction was effected in the solid / melt phase at 190 deg. C in 1.0 h. The radiolabelling yield was ∼80.0-86.0%, and the radiochemical purity > 99.5% and specific activity of R x /D x =900-1300/60-800 MBq ( x dosage forms at 3 weeks. The dosage forms (especially R x ) were only made against firm patient appointment(s). Thus far we have prepared 14 R x (49.0 GBq) and 70 + 14 batches (43.43 GBq) of (∼150 nos.) D x forms, and used them in 14 and > 1100 patients respectively. (author)

  9. Effect of surfactants, gastric emptying, and dosage form on supersaturation of dipyridamole in an in vitro model simulating the stomach and duodenum.

    Science.gov (United States)

    Mitra, A; Fadda, H M

    2014-08-04

    The purpose of this study was to investigate the influence of gastric emptying patterns, surfactants, and dosage form on the supersaturation of a poorly soluble weakly basic drug, dipyridamole, using an in vitro model mimicking the dynamic environment of the upper gastrointestinal tract, and, furthermore, to evaluate the usefulness of this model in establishing correlations to in vivo bioavailability for drugs with solubility/dissolution limited absorption. A simulated stomach duodenum model comprising four compartments was used to assess supersaturation and precipitation kinetics as a function of time. It integrates physiologically relevant fluid volumes, fluid transfer rates, and pH changes of the upper GI tract. Monoexponential gastric emptying patterns simulating the fasted state were compared to linear gastric emptying patterns simulating the fed state. The effect of different surfactants commonly used in oral preparations, specifically, sodium lauryl sulfate (SLS), poloxamer-188, and polysorbate-80, on dipyridamole supersaturation was investigated while maintaining surface tension of the simulated gastric fluids at physiological levels and without obtaining artificial micellar solubilization of the drug. The supersaturation behavior of different dose strengths of dipyridamole was explored. Significant levels of dipyridamole supersaturation were observed in the duodenal compartment under all the different in vivo relevant conditions explored. Dipyridamole supersaturation ratios of up to 11-fold have been observed, and supersaturation has been maintained for up to 120 min. Lower duodenal concentrations of dipyridamole were observed under linear gastric emptying patterns compared to mononexponential gastric emptying. The mean duodenal area under concentration-time curves (AUC60min) for the dipyridamole concentration profile in the duodenal compartment is significantly different for all the surfactants explored (P stomach duodenum model can provide a reliable and

  10. Colheita manual e diferentes formas de aproveitamento de grãos de gergelim. = Manual harvesting and the different forms of exploitation of sesame grain

    Directory of Open Access Journals (Sweden)

    Diego Antonio Nóbrega Queiroga

    2010-12-01

    Full Text Available A colheita é uma das etapas mais importantes no rendimento final do sistema produtivo do gergelim, pois perdas de sementes de 50% ou mais podem ocorrer após a maturação completa, devido à deiscência das cápsulas. Dessa forma, objetivou-se no presente trabalho apresentar, por meio de uma revisão bibliográfica, as tecnologias recomendadas para a colheita do gergelim: corte das plantas, preparação e organização dos feixes, secagem, batedura, peneiração e ventilação dos grãos. Ressalta-se, ainda, que a comercialização do gergelim no Nordeste é bastante pulverizada e de difícil organização, principalmente por ser proveniente de pequenos agricultores, onde se concentra a maior parte da produção. Nessa situação, o ideal é que os agricultores se organizem via cooperativas e associações para fomentar o cultivo em comunidade visando um planejamento a priori para maior eficiência e rentabilidade da exploração do gergelim, principalmente pelo fato do consumo nacional apresentar-se superior a oferta do produto. Este trabalho também relata a verticalização da produção de gergelim e as suas qualidades na saúde e alimentação humana. = The harvest is one of the most important stages in the final yield of the production system of sesame, because seed losses of 50% or more might occur following maturation, due to dehiscence of the capsules. Thus, the aim of this study show was to review the literature relative to the recommended technologies for the harvesting of sesame: cutting plant, preparation and organization of the beams, drying, mixing, sifting and ventilation of the grain. It is also important to note that the marketing of sesame in the Northeast is highly dispersed and difficult to organized, primarily because it is obtained from small farmers, where most of the production is done. In this a situation, the ideal would be for farmers be organized through cooperatives and associations to promote community growth in

  11. Grænsekrydsende ledelse

    DEFF Research Database (Denmark)

    Elmholdt, Claus Westergård; Ingerslev, Karen

    2013-01-01

    interessere sig for, hvordan de tænker, taler og handler på grænser. Ledere er, qua deres organisatoriske position, i særlig grad ansvarlige for at etablere grænsepraktikker, hvor grænser bliver til ’broer’ og ikke ’barrierer’ for samarbejde og innovation. Lykkes det ikke at gøre grænser til udviklingsforkant...

  12. Grøstl Addendum

    DEFF Research Database (Denmark)

    Gauravaram, Praveen; Knudsen, Lars R.; Matusiewicz, Krystian

    2009-01-01

    This document is an addendum to the submission document of Grøstl, which was selected for the second round of NIST’s SHA-3 competition [18]. We stress that we do not change the specification of Grøstl. In other words, Grøstl is defined exactly as specified in the original submission document [8]....

  13. Development of the fast, simple and fully validated high performance liquid chromatographic method with diode array detector for quantification of testosterone esters in an oil-based injectable dosage form.

    Science.gov (United States)

    Kozlik, Petr; Tircova, Barbora

    2016-11-01

    Counterfeit steroids are available on the black market, ultimately to consumers who believe they are buying a legitimate pharmaceutical item from the labeled company. In many cases, counterfeit steroids can contain lower doses or some products can be overdosed. This can unwittingly expose users to a significant health risks. The mixture of testosterone propionate, phenylpropionate, isocaproate and decanoate in an oil-based injectable dosage form belongs to the one of the most misused illicit drugs by a variety of athletes. This study developed a new, fast, simple and reliable HPLC method combined with a simple sample preparation step to determine testosterone propionate, phenylpropionate, isocaproate and decanoate in an oil-based injectable dosage form without the use of sophisticated and expensive instrumentation. The developed analytical procedure provides high throughput of samples where LC analysis takes only 6min and sample preparation of oil matrix in one step takes approximately 10min with precision ranging from 1.03 to 3.38% (RSD), and accuracy (relative error %) within ±2.01%. This method was found to be precise, linear, accurate, sensitive, selective and robust for routine application in screening of commercial pharmaceutical products based on content of mentioned testosterone esters in their oil-based injectable dosage form for counterfeit drugs. This method was successfully applied to the analysis of nine samples of commercial testosterone mixtures purchased from various sources and will be further used as an effective screening method for determination of previously mentioned testosterone esters in samples confiscated by Institute of Forensic Science (Slovakia) during the illegal trade. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. Polymer adhesion predictions for oral dosage forms to enhance drug administration safety. Part 3: Review of in vitro and in vivo methods used to predict esophageal adhesion and transit time.

    Science.gov (United States)

    Drumond, Nélio; Stegemann, Sven

    2018-05-01

    The oral cavity is frequently used to administer pharmaceutical drug products. This route of administration is seen as the most accessible for the majority of patients and supports an independent therapy management. For current oral dosage forms under development, the prediction of their unintended mucoadhesive properties and esophageal transit profiles would contribute for future administration safety, as concerns regarding unintended adhesion of solid oral dosage forms (SODF) during oro-esophageal transit still remain. Different in vitro methods that access mucoadhesion of polymers and pharmaceutical preparations have been proposed over the years. The same methods might be used to test non-adhesive systems and contribute for developing safe-to-swallow technologies. Previous works have already investigated the suitability of non-animal derived in vitro methods to assess such properties. The aim of this work was to review the in vitro methodology available in the scientific literature that used animal esophageal tissue to evaluate mucoadhesion and esophageal transit of pharmaceutical preparations. Furthermore, in vivo methodology is also discussed. Since none of the in vitro methods developed are able to mimic the complex swallowing process and oro-esophageal transit, in vivo studies in humans remain as the gold standard. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Intercavitary implants dosage calculation

    International Nuclear Information System (INIS)

    Rehder, B.P.

    The use of spacial geometry peculiar to each treatment for the attainment of intercavitary and intersticial implants dosage calculation is presented. The study is made in patients with intercavitary implants by applying a modified Manchester technique [pt

  16. In vitro dissolution of generic immediate-release solid oral dosage forms containing BCS class I drugs: comparative assessment of metronidazole, zidovudine, and amoxicillin versus relevant comparator pharmaceutical products in South Africa and India.

    Science.gov (United States)

    Reddy, Nallagundla H S; Patnala, Srinivas; Löbenberg, Raimar; Kanfer, Isadore

    2014-10-01

    Biowaivers are recommended for immediate-release solid oral dosage forms using dissolution testing as a surrogate for in vivo bioequivalence studies. Several guidance are currently available (the World Health Organization (WHO), the US FDA, and the EMEA) where the conditions are described. In this study, definitions, criteria, and methodologies according to the WHO have been applied. The dissolution performances of immediate-release metronidazole, zidovudine, and amoxicillin products purchased in South African and Indian markets were compared to the relevant comparator pharmaceutical product (CPP)/reference product. The dissolution performances were studied using US Pharmacopeia (USP) apparatus 2 (paddle) set at 75 rpm in each of three dissolution media (pH1.2, 4.5, and 6.8). Concentrations of metronidazole, zidovudine, and amoxicillin in each dissolution media were determined by HPLC. Of the 11 metronidazole products tested, only 8 could be considered as very rapidly dissolving products as defined by the WHO, whereas 2 of those products could be considered as rapidly dissolving products but did not comply with the f 2 acceptance criteria in pH 6.8. All 11 zidovudine products were very rapidly dissolving, whereas in the case of the 14 amoxicillin products tested, none of those products met any of the WHO criteria. This study indicates that not all generic products containing the same biopharmaceutics classification system (BCS) I drug and in similar strength and dosage form are necessarily in vitro equivalent. Hence, there is a need for ongoing market surveillance to determine whether marketed generic products containing BCS I drugs meet the release requirements to confirm their in vitro bioequivalence to the respective reference product.

  17. UPLC and LC-MS studies on degradation behavior of irinotecan hydrochloride and development of a validated stability-indicating ultra-performance liquid chromatographic method for determination of irinotecan hydrochloride and its impurities in pharmaceutical dosage forms.

    Science.gov (United States)

    Kumar, Navneet; Sangeetha, Dhanaraj; Reddy, Sunil P

    2012-10-01

    The objective of the current investigation was to study the degradation behavior of irinotecan hydrochloride under different International Conference on Harmonization (ICH) recommended stress conditions using ultra-performance liquid chromatography and liquid chromatography-mass spectrometry and to establish a validated stability-indicating reverse-phase ultra-performance liquid chromatographic method for the quantitative determination of irinotecan hydrochloride and its seven impurities and degradation products in pharmaceutical dosage forms. Irinotecan hydrochloride was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. Irinotecan hydrochloride was found to degrade significantly in oxidative and base hydrolysis and photolytic degradation conditions. The degradation products were well resolved from the main peak and its impurities, thus proving the stability-indicating power of the method. Chromatographic separation was achieved on a Waters Acquity BEH C8 (100 × 2.1 mm) 1.7-µm column with a mobile phase containing a gradient mixture of solvent A (0.02M KH(2)PO(4) buffer, pH 3.4) and solvent B (a mixture of acetonitrile and methanol in the ratio of 62:38 v/v). The mobile phase was delivered at a flow rate of 0.3 mL/min with ultraviolet detection at 220 nm. The run time was 8 min, within which irinotecan and its seven impurities and degradation products were satisfactorily separated. The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness. This method was also suitable for the assay determination of irinotecan hydrochloride in pharmaceutical dosage forms.

  18. Grúas-torre

    Directory of Open Access Journals (Sweden)

    Chinchilla, M.

    1964-09-01

    Full Text Available The current large volume of construction, and the new building methods, including large scale préfabrication, have made it necessary to develop adequate machinery to cope with the new requirements. These include the quick distribution of materials and the lifting of large and heavy items. One of these machines which has now attained a widespread use is the tower crane, both of the fixed and moveable type, either on tyres, rails, or of the climbing type. Although these cranes have been known for the last fifty years, their full development only began after the last World War. Their most usual features and varieties make it possible to classify these cranes in a table, which includes most of the models now in standard use.Los nuevos volúmenes de edificación, y los nuevos sistemas, como la prefabricación, han exigido el desarrollo de la maquinaria auxiliar correspondiente, con el fin de poder cubrir las necesidades de alimentación de la obra, reparto de materiales y elevación de cargas y piezas voluminosas. Entre las máquinas auxiliares que h a n obtenido una verdadera mayoría, de edad se encuentran las grúas-torre, fijas, móviles sobre neumáticos o carriles y trepadoras, las cuales, pese a ser conocidas y empleadas desde los años 10, han encontrado su verdadero campo de aplicación después de la segunda guerra mundial. Sus características más comunes respecto a elementos que constituyen la mayor parte de los modelos, permiten agruparlas en una tabla en la que quedan incluidas casi todas las de uso normal.

  19. Identification of different shapes, colors and sizes of standard oral dosage forms in diabetes type 2 patients-A pilot study.

    Science.gov (United States)

    Stegemann, Sven; Riedl, Regina; Sourij, Harald

    2017-01-30

    The clear identification of drug products by the patients is essential for a safe and effective medication management. In order to understand the impact of shape, size and color on medication identification a study was performed in subjects with type 2 diabetes mellitus (T2D). Ten model drugs differentiated by shape, size and color were evaluated using a mixed method of medication schedule preparation by the participants followed by a semi-structured interview. Detection times were fastest for the large round tablet shape and the bi-chromatic forms. Larger size was easier to identify than the smaller sizes except for the bi-chromatic forms. The shape was the major source of errors, followed by the size and the color dimension. The results from this study suggests that color as a single dimension are perceived more effectively by subjects with T2D compared to shape and size, which requires a more demanding processing of three dimension and is dependent on the perspective. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. The application dosage of Azolla pinnata in fresh and powder form as organic fertilizer on soil chemical properties, growth and yield of rice plant

    Science.gov (United States)

    Setiawati, Mieke Rochimi; Damayani, Maya; Herdiyantoro, Diyan; Suryatmana, Pujawati; Anggraini, Derisfha; Khumairah, Fiqriah Hanum

    2018-02-01

    The yield of rice plants is strongly influenced by N fertilizer. Nitrogen in rice plants has roles in vegetative growth, tiller formation and increasing yield through rice protein formation. Nitrogen supplied from organic fertilizers is better than inorganic fertilizers that may have environmental problem effects. Organic fertilizers from Azolla pinnata water fern contain higher N than other organic fertilizers. Symbiosis between A. pinnata and the N-fixing cyanobacteria results in high content of nitrogen, 3 to 5%. A. pinnata can be added to the rice field as organic fertilizer in form of fresh biomass or composted. Composted form can be ground into powder which passes through 100 mesh sieve. Preparation of compost powder of A. pinnata is done to reduce the constraints of voluminous application of organic fertilizers and to improve the efficiency of its use. The objective of this research was to compare the effect of the use of fresh A. pinnata and compost powder of A. pinnata on some soil and plant chemical properties and rice yield. The treatments applied were fresh A. pinnata at the dose of 0, 10 and 20 ton ha-1 and A. pinnata compost powder at 12.5 and 25 kg ha-1. The results showed that incorporation of fresh A. pinnata at 20 tons ha-1 and its compost powder at 25 kg ha-1 increased the available P of soil, plant P content and tiller number, but did not affect the content of organic-C, total soil N, plant N content and rice yield. This study suggested the benefits of A. pinnata compost powder technology in organic fertilization of soil to increase the nutrient content of soil and rice plants.

  1. Development and validation of a reversed-phase HPLC method for simultaneous estimation of clotrimazole and beclomethasone dipropionate in lotion and cream dosage form

    Directory of Open Access Journals (Sweden)

    Komal R Dhudashia

    2013-01-01

    Full Text Available Background: The combination of Clotrimazole and Beclomethasone dipropionate is used as anti-fungal and anti-inflammatory for external use in the form of cream and lotion. Aim: A simple, specific, economic, precise, and accurate reversed-phase high performance liquid chromatographic method development for the simultaneous estimation of clotrimazole (CT and beclomethasone dipropionate (BD in lotion and cream formulations. Materials and Methods: The chromatographic separation was achieved on a Kromasil C18 (150 mm × 4.6 mm, 5 μm analytical column. A mixture of acetonitrile-water (70:30, v/v was used as the mobile phase, at a flow rate of 1 ml/min and detector wavelength at 254 nm. The validation of the proposed method was carried out for specificity, linearity, accuracy, precision, limit of detection, limit of quantitation, and system suitability test as per ICH guideline. Results: The retention time of CT and BD was found to be 5.4 and 4 min, respectively. The linear dynamic ranges were from 2-16 μg/ml and 80-640 μg/ml for BD and CT, respectively. Limit of detection and quantification for BD were 0.039 and 0.12 μg/ml, for CT 1.24 and 3.77 μg/ml, respectively. Conclusions: The developed method was validated and found to be simple, specific, accurate and precise and can be used for routine quality control analysis of titled drugs in combination in lotion and cream formulation.

  2. Development of a validated HPLC method for the quantitative determination of trelagliptin succinate and its related substances in pharmaceutical dosage forms.

    Science.gov (United States)

    Luo, Zhiqiang; Chen, Xinjing; Wang, Guopeng; Du, Zhibo; Ma, Xiaoyun; Wang, Hao; Yu, Guohua; Liu, Aoxue; Li, Mengwei; Peng, Wei; Liu, Yang

    2018-01-01

    Trelagliptin succinate is a dipeptidyl peptidase IV (DPP-4) inhibitor which is used as a new long-acting drug for once-weekly treatment of type 2 diabetes mellitus (DM). In the present study, a rapid, sensitive and accurate high-performance liquid chromatography (HPLC) method was developed and validated for separation and determination of trelagliptin succinate and its eight potential process-related impurities. The chromatographic separation was achieved on a Waters Xselect CSH™ C 18 (250mm×4.6mm, 5.0μm) column. The mobile phases comprised of 0.05% trifluoroacetic acid in water as well as acetonitrile containing 0.05% trifluoroacetic acid. The compounds of interest were monitored at 224nm and 275nm. The stability-indicating capability of this method was evaluated by performing stress test studies. Trelagliptin succinate was found to degrade significantly in acid, base, oxidative and thermal stress conditions and only stable in photolytic degradation condition. The degradation products were well resolved from the main peak and its impurities. In addition, the major degradation impurities formed under acid, base, oxidative and thermal stress conditions were characterized by ultra-high-performance liquid chromatography coupled with linear ion trap-Orbitrap tandem mass spectrometry (UHPLC-LTQ-Orbitrap). The method was validated to fulfill International Conference on Harmonisation (ICH) requirements and this validation included specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), accuracy, precision and robustness. The developed method in this study could be applied for routine quality control analysis of trelagliptin succinate tablets, since there is no official monograph. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Continuous production of controlled release dosage forms based on hot-melt extruded gum arabic: Formulation development, in vitro characterization and evaluation of potential application fields.

    Science.gov (United States)

    Kipping, Thomas; Rein, Hubert

    2016-01-30

    Controlled release matrices based on gum arabic are prepared by applying a continuous hot-melt extrusion technology: the pre-mixture consisting of gum arabic and the incorporated API is plasticized by a co-rotating twin-screw extruder, an intermediate strand is formed by a round nozzle. Single dosed matrices are prepared by cutting the semi elastic strand with a rotary fly cutter. Paracetamol and phenazone are used as model drug substances. High drug loadings up to 70% can be realized. Matrices are characterized concerning their crystalline structure, in vitro dissolution, disintegration time and various physical parameters including glass transition temperature (Tg). Release characteristic behavior is mainly influenced by erosion of the matrices. At higher drug loadings also diffusion based transport gain importance. The solubility of the API shows an influence on the erosion rate of the matrix and should therefore be considered during formulation development. Tg is mainly influenced by the solubility of the API in the surrounding matrix. High soluble phenazone shows a decrease, whereas paracetamol addition has nearly no influence on the Tg of the polymeric system. Activation energy (EA) of the glass transition is determined via dynamic mechanical analysis. The addition of APIs leads to a reduction of EA indicating an increased molecular movement at Tg region compared to placebo extrudates. X-ray diffraction is used to determine the crystalline state of the extruded matrices and interaction between matrix and incorporated APIs. The production of thin layer matrices is an interesting option to provide a fast drug delivery to the oral cavity. High mechanical strength combined with fast disintegration times can be a great advantage for the development of oro-dispersible tablets. A great benefit of the evaluated processing technology is the simple adaption of the final dose by varying either the cutting length or the diameter of the nozzle resulting in a cost

  4. Foreign matter identification from solid dosage forms

    DEFF Research Database (Denmark)

    Pekka Pajander, Jari; Haugshøj, Kenneth Brian; Bjørneboe, Kathrine

    2013-01-01

    Despite the increased request for robust quality systems, the end product may contain unidentified defects or discoloured regions. The foreign matter has to be monitored, identified and its source defined in order to prevent further contamination. However, the identification task can be complicated......, since the origin and nature of foreign matter are various. The aim of this study is to provide an efficient foreign matter identification procedure for various substances possibly originating from pharmaceutical manufacturing environment. The surface or cross-section of the uncoated and coated tablets...... was analysed by utilization of different analytical techniques, such as light microscopy (LM), scanning electron microscopy in combination with energy dispersive X-ray microanalysis (SEM/EDX), Fourier transform infrared spectroscopy (FT-IR) and time-of-flight secondary ion mass spectrometry (To...

  5. Spectrophotometric Determination of Trimipramine in Tablet Dosage ...

    African Journals Online (AJOL)

    Purpose: To develop and validate simple, rapid and sensitive spectrophotometric procedures for determination of trimipramine in tablet dosage form. Methods: The methods were based on the interaction of trimipramine as n-electron donor with the ο-acceptor, iodine and various π-acceptors, namely: chloranil (CH), ...

  6. Endotoxin dosage in sepsis

    Directory of Open Access Journals (Sweden)

    Vincenzo Rondinelli

    2012-03-01

    Full Text Available Introduction. Endotoxin, a component of the cell wall of Gram-negative bacteria is a major contributor to the pathogenesis of septic shock and multiple organ failure (MOF. Its entry into the bloodstream stimulates monocytes/macrophages which once activated produce and release cytokines, nitric oxide and other mediators that induce systemic inflammation, endothelial damage, organ dysfunction, hypotension (shock and MOF.The aim of this study is to evaluate the usefulness of a quantitative test for the dosage of endotoxin to determine the risk of severe Gram-negative sepsis. Materials and methods. In the period January 2009 - June 2011 we performed 897 tests for 765 patients, mostly coming from the emergency room and intensive care, of which 328 (43% women (mean age 53 and 437 (57% male (mean age 49. Fifty-nine patients, no statistically significant difference in sex, were monitored by an average of two determinations of EA.All patients had procalcitonin values significantly altered.The kit used was EAA (Endotoxin Activity Assay Estor Company, Milan, which has three ranges of endotoxin activity (EA: low risk of sepsis if <0.40 units, medium if between 0.40 and 0.59; high if 0.60. Results. 78 out of 765 patients (10% had a low risk, 447 (58% a medium risk and 240 (32% a high risk.The dosage of EA, combined with that of procalcitonin, has allowed a more targeted antibiotic therapy. Six patients in serious clinical conditions were treated by direct hemoperfusion with Toraymyxin, a device comprising a housing containing a fiber polypropylene and polystyrene with surface-bound polymyxin B, an antibiotic that removes bacterial endotoxins from the blood. Conclusions.The test is useful in risk stratification as well as Gram negative sepsis, to set and monitor targeted therapies, also based on the neutralization of endotoxin.

  7. Grønne, kommunale regnskaber

    DEFF Research Database (Denmark)

    Kristiansen, K.

    Hvad er et grønt, kommunalt regnskab? Hvordan får man miljøhjulet til at dreje? Hvorfor lave et grønt regnskab? Håndbog i grønne, kommunale regnskaber viser, hvordan man nemt kan lave et grønt regnskab, som er tilpasset forholdene i den enkelte kommune og som kan bruges i det lokale Agenda 21...

  8. Populismens grænser

    DEFF Research Database (Denmark)

    Siim, Birte

    2010-01-01

    I den forløbne uge har 'burkasagen' og sagen om kønsopdelte grupper på Blågårdsskolen atter udfordret grænserne for det danske demokratis rummelighed. De to sager har vakt stor opsigt i pressen og har fremkaldt voldsomme udtalelser både fra repræsentanter for regeringen, dens støtteparti og fra t...

  9. Gr.

    Directory of Open Access Journals (Sweden)

    Václav Blažek

    1984-12-01

    Full Text Available The-Greek word   (Archilochos, Aristophanes, Plato, Aristoteles, Dor. ní&anos: "ape", ní-&wv, -wvoi; "little ape" (Pindaros does not have any convincible Indo-European etymology. The old comparison with Lat. foedus "beastly, foul" etc. is obviously improbable and the word is rather bor­rowed from an unknown source.

  10. Quercetin topical application, from conventional dosage forms to nanodosage forms.

    Science.gov (United States)

    Hatahet, T; Morille, M; Hommoss, A; Devoisselle, J M; Müller, R H; Bégu, S

    2016-11-01

    Skin is a multifunctional organ with activities in protection, metabolism and regulation. Skin is in a continuous exposure to oxidizing agents and inflammogens from the sun and from the contact with the environment. These agents may overload the skin auto-defense capacity. To strengthen skin defense mechanisms against oxidation and inflammation, supplementation of exogenous antioxidants is a promising strategy. Quercetin is a flavonoid with very pronounced effective antioxidant and antiinflammatory activities, and thus a candidate of first choice for such skin supplementation. Quercetin showed interesting actions in cellular and animal based models, ranging from protecting cells from UV irradiation to support skin regeneration in wound healing. However, due to its poor solubility, quercetin has limited skin penetration ability, and various formulation approaches were taken to increase its dermal penetration. In this article, the quercetin antioxidant and antiinflammatory activities in wound healing and supporting skin against aging are discussed in detail. In addition, quercetin topical formulations from conventional emulsions to novel nanoformulations in terms of skin penetration enhancement are also presented. This article gives a comprehensive review of quercetin for topical application from biological effects to pharmaceutical formulation design for the last 25 years of research. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Die Brustflosse des Grönlandswales (Balaena mysticetus L.)

    NARCIS (Netherlands)

    Kükenthal, W.

    1922-01-01

    Das Studium der Brustflosse des Grönlandswales hat zu Fragen von allgemeinerem Interesse geführt. Ihre kurze und breite Form sowie ihre anscheinende Fünffingerigkeit, die ausserdem nur noch beim südlichen Glattwal (Balaena australis) vorkommt, liess sie ursprünglicher erscheinen als die schlankere

  12. Impaired spermatogenesis and gr/gr deletions related to Y chromosome haplogroups in Korean men.

    Directory of Open Access Journals (Sweden)

    Jin Choi

    Full Text Available Microdeletion of the Azoospermia Factor (AZF regions in Y chromosome is a well-known genetic cause of male infertility resulting from spermatogenetic impairment. However, the partial deletions of AZFc region related to spermatogenetic impairment are controversial. In this study, we characterized partial deletion of AZFc region in Korean patients with spermatogenetic impairment and assessed whether the DAZ and CDY1 contributes to the phenotype in patients with gr/gr deletions. Total of 377 patients with azoo-/oligozoospermia and 217 controls were analyzed using multiplex polymerase chain reaction (PCR, analysis of DAZ-CDY1 sequence family variants (SFVs, and quantitative fluorescent (QF-PCR. Of the 377 men with impaired spermatogenesis, 59 cases (15.6% had partial AZFc deletions, including 32 gr/gr (8.5%, 22 b2/b3 (5.8%, four b1/b3 (1.1% and one b3/b4 (0.3% deletion. In comparison, 14 of 217 normozoospermic controls (6.5% had partial AZFc deletions, including five gr/gr (2.3% and nine b2/b3 (4.1% deletions. The frequency of gr/gr deletions was significantly higher in the azoo-/oligozoospermic group than in the normozoospermic control group (p = 0.003; OR = 3.933; 95% CI = 1.509-10.250. Concerning Y haplogroup, we observed no significant differences in the frequency of gr/gr deletions between the case and the control groups in the YAP+ lineages, while gr/gr deletion were significantly higher in azoo-/oligozoospermia than normozoospermia in the YAP- lineage (p = 0.004; OR = 6.341; 95% CI = 1.472-27.312. Our data suggested that gr/gr deletion is associated with impaired spermatogenesis in Koreans with YAP- lineage, regardless of the gr/gr subtypes.

  13. Computing Gröbner fans

    DEFF Research Database (Denmark)

    Fukuda, K.; Jensen, Anders Nedergaard; Thomas, R.R.

    2005-01-01

    This paper presents algorithms for computing the Gröbner fan of an arbitrary polynomial ideal. The computation involves enumeration of all reduced Gröbner bases of the ideal. Our algorithms are based on a uniform definition of the Gröbner fan that applies to both homogeneous and non......-homogeneous ideals and a proof that this object is a polyhedral complex. We show that the cells of a Gröbner fan can easily be oriented acyclically and with a unique sink, allowing their enumeration by the memory-less reverse search procedure. The significance of this follows from the fact that Gröbner fans...... are not always normal fans of polyhedra in which case reverse search applies automatically. Computational results using our implementation of these algorithms in the software package Gfan are included....

  14. [Die Gründung...] / Anders Henriksson

    Index Scriptorium Estoniae

    Henriksson, Anders

    2004-01-01

    Rets.: Karsten Brüggemann. Die Gründung der Republik Estland und das Ende des "Einen und unteilbaren Russland" : die Petrograder Front des Russischen Bürgerkrieges, 1918-1920. Wiesbaden : Harrassowitz, 2002

  15. Grænser, barrierer og broer

    DEFF Research Database (Denmark)

    Nortvig, Anne Mette; Christiansen, René B.; Karlsen, Asgjerd Vea

    2015-01-01

    ledelsesmæssige muligheder for, at skoleklasser i grundskolen kan arbejde sammen og lære på tværs af de tre landes grænser. Nogle af de helt overordnede mål for projektet har således været at udvikle grænseoverskridende undervisningsmodeller i Norden, der kunne mindske de mentale og praktiske barrierer for en...

  16. Branding af grønne byer

    DEFF Research Database (Denmark)

    Konijnendijk, Cecil Cornelis; Petersen, Karen Sejr

    2010-01-01

    Det grønne - byens parker og natur - kan være med til at skabe en attraktiv by, som har stærk identitet og brand, både for omverden og byens egne borgere.......Det grønne - byens parker og natur - kan være med til at skabe en attraktiv by, som har stærk identitet og brand, både for omverden og byens egne borgere....

  17. MathGR: a tensor and GR computation package to keep it simple

    OpenAIRE

    Wang, Yi

    2013-01-01

    We introduce the MathGR package, written in Mathematica. The package can manipulate tensor and GR calculations with either abstract or explicit indices, simplify tensors with permutational symmetries, decompose tensors from abstract indices to partially or completely explicit indices and convert partial derivatives into total derivatives. Frequently used GR tensors and a model of FRW universe with ADM type perturbations are predefined. The package is built around the philosophy to "keep it si...

  18. Desempenho e digestibilidade in vivo de cordeiros alimentados com dietas contendo canola em grão integral em diferentes formas Performance and digestibility in vivo of lambs fed diets with whole canola grain in different forms

    Directory of Open Access Journals (Sweden)

    Vanderlei Bett

    1999-08-01

    retention for CP (3.0 g/d comparing to the other diets (between 5.0 and 7.3 g/d. The treatments did not differ on the propionate concentration, but reduced the concentrations of butyrate (7.08, 4.87, 4.08, and 4.29 μM/mL of ruminal fluid and ammonia-N (12.17, 8.69, 8.40, and 7.66 mg/100 mL of ruminal fluid. The use of canola, in the different forms, did not affect the intake and digestion, providing similar performance among the treatments.

  19. Evaluering af Grøn Livsstil

    DEFF Research Database (Denmark)

    Hoffmann, Birgitte; Agger, Annika Heilskov

    1998-01-01

    :  the potential of change of the initiatives;  the development of the campaign, and  the strategies and organisation of the Danish campaign. The evaluation comprised of large number of qualitative interview and collects important knowledge of organising local processes of change......Evaluations of the Danish part of the International Campaign Green Action Plan (Grøn Livsstil). 'Grøn Livsstil' aims at qualifying and supporting individuals and families to take action in order to change their households towards sustainability. The evaluation focused on qualitative aspects such as...

  20. Psyken er en grænseflade

    DEFF Research Database (Denmark)

    Hoffmeyer, Jesper

    2011-01-01

    En computer er i sig selv blot et stykke mekanik. Det afgørende sker i mødet mellem maskinen, mennesker og fællesskaber: på grænsefladen. Præcis som hos levende væsner......En computer er i sig selv blot et stykke mekanik. Det afgørende sker i mødet mellem maskinen, mennesker og fællesskaber: på grænsefladen. Præcis som hos levende væsner...

  1. The generic Gröbner walk

    DEFF Research Database (Denmark)

    Jensen, Anders Nedergaard; Lauritzen, Niels; Fukuda, Komei

    2005-01-01

    perturbation of this line. This usually involves both time and space demanding arithmetic of integers much larger than the input numbers. In this paper we show how the explicit line may be replaced by a formal line using Robbiano's characterization of group orders on . This gives rise to the generic Gröbner...... walk involving only Gröbner basis conversion over facets and computations with marked polynomials. The infinite precision integer arithmetic is replaced by term order comparisons between (small) integral vectors. This makes it possible to compute with infinitesimal numbers and perturbations...

  2. Determination of methadone hydrochloride in a maintenance dosage formulation.

    Science.gov (United States)

    Hoffmann, T J; Thompson, R D

    1975-07-01

    A colorimetric method for direct quantitative assay of methadone hydrochloride in liquid oral dosage forms is presented. The procedure involves the formation of a dye complex with bromothymol blue buffer solution. The resultant complex is extracted with benzene and measured spectrophotometrically. Duplicate tests on the formulation showed 99.2% of the labeled amount of methadone.

  3. Development of clinical dosage forms for a poorly water-soluble drug II: formulation and characterization of a novel solid microemulsion preconcentrate system for oral delivery of a poorly water-soluble drug.

    Science.gov (United States)

    Li, Ping; Hynes, Sara R; Haefele, Thomas F; Pudipeddi, Madhu; Royce, Alan E; Serajuddin, Abu T M

    2009-05-01

    The solution of a poorly water-soluble drug in a liquid lipid-surfactant mixture, which served as a microemulsion preconcentrate, was converted into a solid form by incorporating it in a solid polyethylene glycol (PEG) matrix. The solid microemulsion preconcentrates thus formed consisted of Capmul PG8 (propylene glycol monocaprylate) as oil, Cremophor EL (polyoxyl 35 castor oil) as surfactant, and hydrophilic polymer PEG 3350 as solid matrix. The drug (aqueous solubility: 0.17 microg/mL at pH 1-8 and 25 degrees C) was dissolved in a melt of the mixture at 65-70 degrees C and then the hot solution was filled into hard gelatin capsules; the liquid gradually solidified upon cooling below 55 degrees C. The solid system was characterized by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), confocal Raman microscopy (CRM), and the dispersion testing in water. It was confirmed that a solid microemulsion preconcentrate is a two-phase system, where clusters of crystalline PEG 3350 formed the solid structure (m.p. 55-60 degrees C) and the liquid microemulsion preconcentrate dispersed in between PEG 3350 crystals as a separate phase. The drug remained dissolved in the liquid phase. In vitro release testing showed that the preconcentrate dispersed readily in water forming a microemulsion with the drug dissolved in the oil particles (PEG 3350 did not interfere with the process of self-microemulsification.

  4. Model of the static universe within GR

    International Nuclear Information System (INIS)

    Karbanovski, V. V.; Tarasova, A. S.; Salimova, A. S.; Bilinskaya, G. V.; Sumbulov, A. N.

    2011-01-01

    Within GR, the problems of the Robertson-Walker universe are discussed. The approach based on transition to a nondiagonal line element is suggested. Within the considered approach, the static universe model is investigated. The possibility of constructing scenarios without an initial singularity and “exotic” matter is discussed. Accordance of the given model to the properties of the observable universe is discussed.

  5. Melatonin charge transfer complex with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone: Molecular structure, DFT studies, thermal analyses, evaluation of biological activity and utility for determination of melatonin in pure and dosage forms

    Science.gov (United States)

    Mohamed, Gehad G.; Hamed, Maher M.; Zaki, Nadia G.; Abdou, Mohamed M.; Mohamed, Marwa El-Badry; Abdallah, Abanoub Mosaad

    2017-07-01

    A simple, accurate and fast spectrophotometric method for the quantitative determination of melatonin (ML) drug in its pure and pharmaceutical forms was developed based on the formation of its charge transfer complex with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) as an electron acceptor. The different conditions for this method were optimized accurately. The Lambert-Beer's law was found to be valid over the concentration range of 4-100 μg mL- 1 ML. The solid form of the CT complex was structurally characterized by means of different spectral methods. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations were carried out. The different quantum chemical parameters of the CT complex were calculated. Thermal properties of the CT complex and its kinetic thermodynamic parameters were studied, as well as its antimicrobial and antifungal activities were investigated. Molecular docking studies were performed to predict the binding modes of the CT complex components towards E. coli bacterial RNA and the receptor of breast cancer mutant oxidoreductase.

  6. Grå strækninger på det overordnede vejnet i det åbne land

    DEFF Research Database (Denmark)

    Sørensen, Michael

    2006-01-01

    udviklet konkrete metoder til udpegning, analyse og udbedring af grå strækninger. I ph.d.-afhandlingen “Grå strækninger i det åbne land – Udvikling, anvendelse og vurdering af alvorlighedsbaseret metode til udpegning, analyse og udbedring af grå strækninger” er der derfor blevet formuleres en overordnet...... filosofi for det grå strækningsarbejde samtidig med, at der med fokus på udpegning udvikles metoder til udpegning, analyse og udbedring af grå strækninger på det overordnede vejnet i det åbne land. Formålet har specifikt været at udvikle metoder, som er både uheldsteoretisk velfunderede og anvendelige i...

  7. Den grønlandske forbindelse

    DEFF Research Database (Denmark)

    Jacobsen, Marc

    2016-01-01

    Danmarks tilstedeværelse i Arktis er helt og aldeles afhængig af, at rigsfællesskabet består. Uden Grønland ville Danmark miste muligheden for at sidde til højbords med USA, Rusland og Canada. En mulighed som, Danmarks størrelse taget i betragtning, er helt unik og af uvurderlig betydning for Dan...... for Danmarks plads i det globale hierarki. Det er derfor alfa og omega, at Danmark fortsat plejer forholdet til Grønland med stor omhu, og at eventuelle uenigheder mellem Nuuk og København bliver taget seriøst og behandlet med stor, gensidig respekt...

  8. Economic Analysis of the Greenland Inland Traverse (GrIT)

    Science.gov (United States)

    2016-06-01

    fuel and cargo based on data from the 2012 and 2014 seasons. DISCLAIMER: The contents of this report are not to be used for advertising ...GrIT compared with airlift ....................................................................... 24 13 Fuel consumed by GrIT12 and GrIT14 compared...objective was to identify and quantify, insofar as possible, the component costs of the GrIT and airlift resupply modes. In effect , we sought to link

  9. Dosage of trace carbon in sodium (1963); Dosage de traces de carbone dans le sodium (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Sannier, J; Vasseur, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    A wet method for dosing carbon in sodium has been developed. The carbon is oxidised in a vacuum using Van SLYKE'S solution. The carbonic acid formed is measured volumetrically; its purity can be controlled by chromatographic analysis. The results obtained show that this method makes it possible to measure carbon in concentrations of about 10 ppm. (authors) [French] Une methode de dosage par voie humide du carbone dans le sodium a ete mise au point. L'oxydation du carbone par la solution de Van SLYKE est realisee sous vide. Le gaz carbonique forme est dose volumetriquement; sa purete peut etre controlee par analyse chromatographique. Les resultats obtenus montrent que cette methode permet de doser des teneurs en carbone de l'ordre de 10 ppm. (auteurs)

  10. Hydraulic Modular Dosaging Systems for Machine Drives

    Directory of Open Access Journals (Sweden)

    A. J. Kotlobai

    2005-01-01

    Full Text Available The justified principle of making modular dosaging systems for positive-displacement multimotor hydraulic drives used in running gear and technological equipment of mobile construction, road and agricultural machines makes it possible to synchronize motion of running parts. The examples of the realization of modular dosaging systems and an algorithm of their operation are given in the paper.

  11. Mesurar la creativitat en disseny gràfic

    OpenAIRE

    Ayala Pérez, José

    2013-01-01

    En aquesta investigació es construeix un marc conceptual, on s'integra la creativitat i el disseny gràfic. S'introdueix el model tridimensional de la creativitat en el disseny gràfic, on la creativitat és disertada en tres dimensions, novetat, comunicació i estètica. Basat en el model tridimensional de la creativitat en Disseny Gràfic, es construeix un instrument per poder mesurar la creativitat d'un disseny gràfic. L'instrument va ser administrat a 115 dissenyadors gràfics del Col · legi de ...

  12. Toward quality assessment of 3D printed oral dosage forms

    DEFF Research Database (Denmark)

    Markl, Daniel; Zeitler, Axel; Rades, Thomas

    2017-01-01

    The additive manufacturing industry achieved a corporate annual growth rate of 25.9% according to the Forbes analysis of the Wohlers Report 2016. This high growth rate is placed in perspective when looking at the past 27 years where the corporate annual growth rate has averaged 26.2% each year in...... methods to assess the quality of the 3D printed geometries. This will be especially important for pharmaceutical products where a sub-standard quality of the final product can have detrimental consequences for patient health and safety....

  13. Development and clinical application of oral dosage forms of taxanes

    NARCIS (Netherlands)

    Moes, J.J.

    2013-01-01

    Cancer is still one of the leading causes of death in the Western World. Despite the development and introduction of new anti-cancer agents, docetaxel and paclitaxel remain the cornerstone of adjuvant and metastatic chemotherapy against solid tumors. Taxanes belong to the class of anti-mitotic

  14. Spectrophotometric Determination of Cilostazol in Tablet Dosage Form

    African Journals Online (AJOL)

    Erah

    Purpose: To develop simple, rapid and selective spectrophotometric methods for ... Conclusion: These validated methods may be useful for routine analysis of cilostazol ... Keywords: Cilostazol tablets, UV spectrophotometry, Linear regression ...

  15. Near infrared spectroscopy in the development of solid dosage forms.

    Science.gov (United States)

    Räsänen, Eetu; Sandler, Niklas

    2007-02-01

    The use of near infrared (NIR) spectroscopy has rapidly grown partly due to demands of process analytical applications in the pharmaceutical industry. Furthermore, newest regulatory guidelines have advanced the increase of the use of NIR technologies. The non-destructive and non-invasive nature of measurements makes NIR a powerful tool in characterization of pharmaceutical solids. These benefits among others often make NIR advantageous over traditional analytical methods. However, in addition to NIR, a wide variety of other tools are naturally also available for analysis in pharmaceutical development and manufacturing, and those can often be more suitable for a given application. The versatility and rapidness of NIR will ensure its contribution to increased process understanding, better process control and improved quality of drug products. This review concentrates on the use of NIR spectroscopy from a process research perspective and highlights recent applications in the field.

  16. Kinetic spectrophotometric determination of ethamsylate in dosage forms.

    Science.gov (United States)

    El-Enany, Nahed; Belal, Fathalla; Rizk, Mohamed

    2007-01-01

    A simple and sensitive kinetic method has been developed for the determination of ethamsylate (ESL) in its pharmaceutical preparations. The method is based upon oxidation of ESL with 3-methyl-2-benzothiazolinone hydrazone hydrochloride in presence of cerium (IV) ammonium sulfate at room temperature for 20 min. The absorbance of the reaction product is measured at 514 nm. The absorbance-concentration plot was rectilinear over the range of 4-30 microg/mL (r = 0.9999). The lower detection limit was 0.267 microl/mL (9.110 x 10(-6) M) and the lower quantitation limit was 0.808 microg/mL. The different experimental parameters affecting the development and stability of the reaction product were studied and optimized. The proposed method was applied to the determination of ESL in formulations, and the results obtained were in good agreement with those obtained using a reference method. The proposed method was also used for the in vitro detection of ESL in spiked human plasma at its therapeutic concentration level.

  17. Spectrophotometeric determination of metoprolol in tablet dosage form

    African Journals Online (AJOL)

    Metoprolol, a beta-1 selective adrenegic receptor blocker antihypertensive agent is fairly new in Nigeria. In view of the endemic faking and adulterating of drugs in Nigeria, a simple, quick, and accurate method was developed for its assay. Metoprolol was coupled with 4-chloro-7-nitrobenzo-2-oxa-1, 3 diazole (NBD-Cl) in ...

  18. 75 FR 54492 - Oral Dosage Form New Animal Drugs; Tiamulin

    Science.gov (United States)

    2010-09-08

    ... certain bacterial respiratory and enteric diseases in swine. The supplemental NADA provides for use of a... Health US, Inc. The supplemental NADA provides for use of an increased strength of tiamulin concentrate solution in the drinking water of swine for the treatment of certain bacterial respiratory and enteric...

  19. Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

    OpenAIRE

    Albed Alhnan, Mohamed; Okwuosa, Tochukwu; Sadia, Muzna; Wan, Ka-Wai; Ahmed, Waqar; Arafat, Basel

    2016-01-01

    The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such as extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet...

  20. The rationale of scored tablets as dosage form.

    NARCIS (Netherlands)

    Rodenhuis, N.; Smet, P.A.G.M. de; Barends, D.M.

    2004-01-01

    The aim of the study was to get insight into the rationale of scored tablets. This was pursued by studying patient's reasons for subdividing ("breaking") scored and unscored tablets. Patients who picked up their prescriptions in 5 community pharmacies in The Netherlands were questioned. Two-hundred

  1. quality evaluation of paracetamol in the bulk, dosage forms

    African Journals Online (AJOL)

    Prince Acheampong

    assay of paracetamol-codeine combination drug as well as estimation of the amount of ... post-market is very essential in the policy and technical guidelines of drug regulatory authorities such as the Food and Drugs Board. ... Pharmaceutical industries may also have simple analytical procedures for both in-process and.

  2. Microbial quality of some herbal solid dosage forms | Enayatifard ...

    African Journals Online (AJOL)

    Herbal remedies are widely used for the treatment and prevention of various diseases and often contain highly active pharmacological compounds. These products have the potential of contamination with different microorganisms. This is due to raw materials contamination and unhygienic production conditions.

  3. Ocular Insert: Dosage Form for Sustain Opthalmic Drug Delivery

    Directory of Open Access Journals (Sweden)

    Sunil Kumar

    2012-06-01

    Full Text Available Except for skin, the eye is the most easily accessible site for topical administration of a medication. Traditional topical ophthalmic formulations (eye drops and ointments have poor bioavailability because of rapid pre-corneal elimination, conjunctival absorption, solution drainage by gravity, induced lacrimation and normal tear turnover. This leads to frequent installations of concentrated medication to achieve a therapeutic effect. The typical “pulse-entry” type drug release observed with ocular aqueous solutions (eye drops, suspensions and ointments can be replaced by more controlled, sustained, and continuous drug delivery, using a controlled-release ocular drug delivery system. Ocular inserts are solid or semisolid sterile preparations, of appropriate size and shape, designed to be inserted behind the eyelid or held on the eye and to deliver drugs for topical or systemic effect. These are polymeric systems into which the drug is incorporated as a solution or dispersion. They are better tolerated as to drainage and tear flow compared with other ophthalmic formulation and produce reliable drug release in the conjunctival cul-de-sac.

  4. 77 FR 15961 - Oral Dosage Form New Animal Drugs; Phenylpropanolamine

    Science.gov (United States)

    2012-03-19

    ... Laboratories, Inc. The NADA provides for the veterinary prescription use of phenylpropanolamine hydrochloride... Veterinary Medicine (HFV-116), Food and Drug Administration, 7500 Standish Pl., Rockville, MD 20855, 240-276... Ely Rd., Pensacola, FL 32514, filed NADA 141-324 that provides for the veterinary prescription use of...

  5. 76 FR 78815 - Oral Dosage Form New Animal Drugs; Cyclosporine

    Science.gov (United States)

    2011-12-20

    ..., Inc. The NADA provides for the veterinary prescription use of cyclosporine oral solution, USP.... FOR FURTHER INFORMATION CONTACT: Angela K.S. Clarke, Center for Veterinary Medicine (HFV-112), Food... (cyclosporine oral solution, USP (MODIFIED)) by veterinary prescription for the control of feline allergic...

  6. Converging shock flows for a Mie-Grüneisen equation of state

    Science.gov (United States)

    Ramsey, Scott D.; Schmidt, Emma M.; Boyd, Zachary M.; Lilieholm, Jennifer F.; Baty, Roy S.

    2018-04-01

    Previous work has shown that the one-dimensional (1D) inviscid compressible flow (Euler) equations admit a wide variety of scale-invariant solutions (including the famous Noh, Sedov, and Guderley shock solutions) when the included equation of state (EOS) closure model assumes a certain scale-invariant form. However, this scale-invariant EOS class does not include even simple models used for shock compression of crystalline solids, including many broadly applicable representations of Mie-Grüneisen EOS. Intuitively, this incompatibility naturally arises from the presence of multiple dimensional scales in the Mie-Grüneisen EOS, which are otherwise absent from scale-invariant models that feature only dimensionless parameters (such as the adiabatic index in the ideal gas EOS). The current work extends previous efforts intended to rectify this inconsistency, by using a scale-invariant EOS model to approximate a Mie-Grüneisen EOS form. To this end, the adiabatic bulk modulus for the Mie-Grüneisen EOS is constructed, and its key features are used to motivate the selection of a scale-invariant approximation form. The remaining surrogate model parameters are selected through enforcement of the Rankine-Hugoniot jump conditions for an infinitely strong shock in a Mie-Grüneisen material. Finally, the approximate EOS is used in conjunction with the 1D inviscid Euler equations to calculate a semi-analytical Guderley-like imploding shock solution in a metal sphere and to determine if and when the solution may be valid for the underlying Mie-Grüneisen EOS.

  7. Gõtter, Grãber und Gelehrte

    Directory of Open Access Journals (Sweden)

    Pedro Moacyr Campos

    1953-09-01

    Full Text Available CERAM, (C. W.. — Gõtter, Grãber und Gelehrte, Rowohlt Verlag, Hamburg.,  1951, 494 págs. (Primeiro Parágrafo do Artigo Bem merecido foi o sucesso encontrado pelo livro de Ceram, Gotter, Graber und Gelehrte, ("Deuses, túmulos e eruditos", que alcançou a cifra de 106.000 exemplares entre novembro de 1949 e março de 1951, continuando a ser reimpresso após esta data.

  8. Equivariant Gröbner bases and the Gaussian two-factor model

    NARCIS (Netherlands)

    Brouwer, A.E.; Draisma, J.

    2011-01-01

    Exploiting symmetry in Gröbner basis computations is difficult when the symmetry takes the form of a group acting by automorphisms on monomials in finitely many variables. This is largely due to the fact that the group elements, being invertible, cannot preserve a term order. By contrast, inspired

  9. Polymorphisms of the GR and HSD11B1 genes influence body mass index and weight gain during hormone replacement treatment in patients with Addison's disease.

    Science.gov (United States)

    Molnár, Ágnes; Kövesdi, Annamária; Szücs, Nikolette; Tóth, Miklós; Igaz, Péter; Rácz, Károly; Patócs, Attila

    2016-08-01

    Glucocorticoid substitution is essential in patients with chronic primary adrenocortical insufficiency (Addison's disease) and both over-treatment and inadequate dosage have deleterious effects. Individual sensitivity to glucocorticoids is partly genetically determined. To test the hypothesis whether the well-characterized SNPs of the GR and HSD11B1 genes may modulate the individual sensitivity to exogenous glucocorticoids and may influence clinical and/or laboratory parameters and the glucocorticoid substitution dosage in patients with Addison's disease. 68 patients with primary adrenocortical insufficiency were involved. Clinical and laboratory data, as well as the dosage of the hormone replacement therapy were collected. Peripheral blood DNA was isolated, and the GR and HSD11B1 SNPs were examined using allele-specific PCR or Taqman assay on Real Time PCR. The allele frequency of the GR N363S polymorphism was higher in patients compared to the control group and the disease appeared significantly earlier in patients harbouring the GR A3669G compared to noncarriers. These patients had higher ACTH level measured at the time of diagnosis. Homozygous BclI carriers had higher body mass index (BMI) and lower total hydrocortisone equivalent supplementation dose needed than heterozygous or noncarriers. The BMI and weight gain during hormone replacement therapy were also higher in carriers of the HSD11B1 rs4844880 treated with glucocorticoids other than dexamethasone. The BclI polymorphism of the GR gene and the rs4844880 of the HSD11B1 gene may contribute to weight gain and may affect the individual need of glucocorticoid substitution dose in these patients. © 2016 John Wiley & Sons Ltd.

  10. GrOW briefs: From research to policy | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-10-17

    Oct 17, 2017 ... ​For access to more GrOW findings and literature, visit the GrOW Research Series. Learn more about the GrOW program. What we do · Funding · Resources · About IDRC. Knowledge. Innovation. Solutions. Careers · Contact Us · Site map. Sign up now for IDRC news and views sent directly to your inbox ...

  11. beta. -Amyloid gene dosage in Alzheimer's disease

    Energy Technology Data Exchange (ETDEWEB)

    Murdoch, G H; Manuelidis, L; Kim, J H; Manuelidis, E E

    1988-01-11

    The 4-5 kd amyloid ..beta..-peptide is a major constituent of the characteristic amyloid plaque of Alzheimer's disease. It has been reported that some cases of sporatic Alzheimer's disease are associated with at least a partial duplication of chromosome 21 containing the gene corresponding to the 695 residue precursor of this peptide. To contribute to an understanding of the frequency to such a duplication event in the overall Alzheimer's population, the authors have determined the gene dosage of the ..beta..-amyloid gene in this collection of cases. All cases had a clinical diagnosis of Alzheimer's confirmed neuropathologically. Each Alzheimer's case had an apparent normal diploid ..beta..-amyloid gene dosage, while control Down's cases had the expected triploid dosage. Thus partial duplication of chromosome 21 may be a rare finding in Alzheimer's disease. Similar conclusions were just reported in several studies of the Harvard Alzheimer collection.

  12. Two New Sharp Ostrowski-Grüss Type Inequalities

    Directory of Open Access Journals (Sweden)

    Zheng Liu

    2013-11-01

    Full Text Available The purpose of this paper is to use a variant of the Grüss inequality to derive two new sharp Ostrowski-Grüss type inequalities related to a perturbed trapezoidal type rule and a perturbed generalized interior point rule, respectively, which provide improvements of some previous results in the literatures.

  13. Growth and Economic Opportunities for Women (GrOW) Frequently ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alejandra

    GrOW will take a broad perspective on the types of questions and evidence on ... question; (2) set the outcome in the broader context of the underlying programme theory, ... Communications from the GrOW team with applicants during the ... There are specific criteria and application processes for this call that should be.

  14. Ungdomsselvmord og moderniseringsproblemer blandt inuit i Grønland

    DEFF Research Database (Denmark)

    Thorslund, Jørgen

    Undersøgelse fra Det grønlandske Forebyggelsesråds projekt vedrørende ungdomsselvmord, der ud fra kulturelle, sociale og psykologiske problemaspekter belyser årsagerne til selvmord blandt unge grønlændere og bringer forslag til forebyggelsesinitiativer, [...] der kan mindske antallet af selvmord....

  15. How to falsify the GR+ΛCDM model with galaxy redshift surveys

    International Nuclear Information System (INIS)

    Acquaviva, Viviana; Gawiser, Eric

    2010-01-01

    A wide range of models describing modifications to general relativity have been proposed, but no fundamental parameter set exists to describe them. Similarly, no fundamental theory exists for dark energy to parametrize its potential deviation from a cosmological constant. This motivates a model-independent search for deviations from the concordance GR+ΛCDM cosmological model in large galaxy redshift surveys. We describe two model-independent tests of the growth of cosmological structure, in the form of quantities that must equal one if GR+ΛCDM is correct. The first, ε, was introduced previously as a scale-independent consistency check between the expansion history and structure growth. The second, υ, is introduced here as a test of scale-dependence in the linear evolution of matter density perturbations. We show that the ongoing and near-future galaxy redshift surveys WiggleZ, BOSS, and HETDEX will constrain these quantities at the 5-10% level, representing a stringent test of concordance cosmology at different redshifts. When redshift space distortions are used to probe the growth of cosmological structure, galaxies at higher redshift with lower bias are found to be most powerful in detecting the presence of deviations from the GR+ΛCDM model. However, because many dark energy or modified gravity models predict consistency with GR+ΛCDM at high redshift, it is desirable to apply this approach to surveys covering a wide range of redshifts and spatial scales.

  16. Transcriptomic analysis of Sporisorium reilianum in response to the strigolactone analogue GR24

    Directory of Open Access Journals (Sweden)

    Seyed Kazem SABBAGH

    2012-09-01

    Full Text Available A suppression subtractive hybridization (SSH approach was used to generate cDNA libraries representing genes differentially expressed in the haploid cells of the maize head smut pathogen Sporisorium reilianum exposed to GR24, a strigolactone analogue. Strigolactones are present in root exudates and have been known to trigger germination of parasitic plant seeds and signal mycorrhizal fungi to connect to root systems forming mutualistic relationships. Cell respiration increased within 1 h after GR24 addition, but decreased after 5 and 8 h. All induced cells were used to construct a cDNA library, which contained 1440 clones. The cDNA ESTs were deposited on macro-array membranes and hybridized with P32 cDNA probes obtained from mRNA isolated from S. reilianum yeast cultures exposed or not to 100 nM GR24 for three time intervals. A total of 678 ESTs were identified as differentially expressed during three time-courses in response to GR24. A set of 36 candidate genes were analyzed by qRT-PCR that presented an induction of the genes at 1 h, confirming the hybridization data. Induced genes mostly affect catalysis functions (45% like cell respiration (27%, and cell signaling (26%. Although the biological significance of this perception remains hypothetical, these results indicate that strigolactones could have a wider biological influence in the rhizosphere than previously recognized.

  17. Visualidad del producto gráfico

    Directory of Open Access Journals (Sweden)

    Dr. José Luis Valero Sancho

    2002-01-01

    Full Text Available Los ojos son una de las vías de entrada de conocimientos más utilizadas por el ser humano, quizá una de las más importantes vías de acceso a la cultura. Pero pueden ser algo más que unos órganos al servicio del hombre, ya que tienen un funcionamiento propio que los hace vulnerables y pueden ser engañados y manipulados desde la apariencia o disposición visual de las cosas. ¿Qué es la visualidad? Según el Diccionario de la Real Academia Española, visual es lo perteneciente a la vista como instrumento o medio para ver y visualidad es el efecto agradable de los objetos vistosos que también pertenece a la vista. Por tanto, no debemos confundir visual con visualidad, pues el primero es el medio y el segundo el efecto que produce la utilización de los ojos y se desarrolla con la experiencia, porque consiste en reconocer y percibir algo que ya ha filtrado el órgano de la vista. ¿Cuándo los productos gráficos tienen visualidad? Cuando una información se explica mejor con estos productos icónicos y tipográficos, percibidos por la vista experta y educada para recibirlos.

  18. Intelligent system for improving dosage control

    Directory of Open Access Journals (Sweden)

    Fabio Cosme Rodrigues dos Santos

    2017-02-01

    Full Text Available Coagulation is one of the most important processes in a drinking-water treatment plant, and it is applied to destabilize impurities in water for the subsequent flocculation stage. Several techniques are currently used in the water industry to determine the best dosage of the coagulant, such as the jar-test method, zeta potential measurements, artificial intelligence methods, comprising neural networks, fuzzy and expert systems, and the combination of the above-mentioned techniques to help operators and engineers in the water treatment process. Current paper presents an artificial neural network approach to evaluate optimum coagulant dosage for various scenarios in raw water quality, using parameters such as raw water color, raw water turbidity, clarified and filtered water turbidity and a calculated Dose Rate to provide the best performance in the filtration process. Another feature in current approach is the use of a backpropagation neural network method to estimate the best coagulant dosage simultaneously at two points of the water treatment plant. Simulation results were compared to the current dosage rate and showed that the proposed system may reduce costs of raw material in water treatment plant.

  19. A brief history of dosage compensation

    Indian Academy of Sciences (India)

    depression of X-linked gene activity in the female, as well as by hyperexpression of the ... to the Harvey lecture, Muller had presented important ideas relative to dosage ... at Columbia. I do recall a talk by the popular physical anthro- pologist ...

  20. Gröbner bases statistics and software systems

    CERN Document Server

    2013-01-01

    The idea of the Gröbner basis first appeared in a 1927 paper by F. S. Macaulay, who succeeded in creating a combinatorial characterization of the Hilbert functions of homogeneous ideals of the polynomial ring. Later, the modern definition of the Gröbner basis was independently introduced by Heisuke Hironaka in 1964 and Bruno Buchberger in 1965. However, after the discovery of the notion of the Gröbner basis by Hironaka and Buchberger, it was not actively pursued for 20 years. A breakthrough was made in the mid-1980s by David Bayer and Michael Stillman, who created the Macaulay computer algebra system with the help of the Gröbner basis. Since then, rapid development on the Gröbner basis has been achieved by many researchers, including Bernd Sturmfels. This book serves as a standard bible of the Gröbner basis, for which the harmony of theory, application, and computation are indispensable. It provides all the fundamentals for graduate students to learn the ABC’s of the Gröbner basis, requiring no speci...

  1. Fossiler i Grønland. 2. del

    DEFF Research Database (Denmark)

    Harper, David Alexander Taylor; Lindow, Bent Erik Kramer

    2009-01-01

    Dette er anden og sidste del af POST Greenlands serie om fossiler i Grønland med tre frimærker, der beretter om de mange og spændende fossilfund fra Grønland. Mærkerne fortsætter vores rejse gennem nogle af nøglebegivenhederne i livets historie, smukt illustreret af endnu flere unikke fossiler....... Disse tre fossiler, en plante, et bløddyr og et hvirveldyr, er fra de yngre aflejringer i Grønland med aldre spændende fra for 200 millioner og indtil kun 8.000 år siden....

  2. Optimizing the dosage of stabilizing chemical

    OpenAIRE

    Harjula, Tomi

    2013-01-01

    A chemical company provides chemical treatment at customer mill in paper industry. This thesis work was done to determine the optimum dosage of stabilizing chemical. The theoretical framework explains the basics of paper brightness and bleaching and how these topics are connected to each other. The knowledge gained is very valuable and can possibly be used in the future in other similar applications as well. This thesis work contains confidential back ground information. Key ...

  3. Grúa para obras de gran altura

    Directory of Open Access Journals (Sweden)

    Hochtief, AG

    1961-12-01

    Full Text Available En las construcciones modernas donde las estructuras se extienden predominantemente en altura, caso corriente en los llamados rascacielos, entre los elementos auxiliares de obra se encuentra, en primer lugar, la grúa.

  4. Flere grøntsager og fuldkornsprodukter i skolemad

    DEFF Research Database (Denmark)

    Christensen, Lene Møller; Trolle, Ellen; Lassen, Anne Dahl

    2017-01-01

    Den mad, danske folkeskoleelever køber gennem deres skolers madordninger, indeholder generelt for lidt fuldkorn og for få grøntsager. DTU Fødevareinstituttet har undersøgt seks skolers indsats med f.eks. at bruge flere grøntsager i varme retter og sandwich og at vælge brød, pasta og ris med...

  5. Hamiltonian approach to GR. Pt. 1. Covariant theory of classical gravity

    Energy Technology Data Exchange (ETDEWEB)

    Cremaschini, Claudio [Silesian University in Opava, Faculty of Philosophy and Science, Institute of Physics and Research Center for Theoretical Physics and Astrophysics, Opava (Czech Republic); Tessarotto, Massimo [University of Trieste, Department of Mathematics and Geosciences, Trieste (Italy); Silesian University in Opava, Faculty of Philosophy and Science, Institute of Physics, Opava (Czech Republic)

    2017-05-15

    A challenging issue in General Relativity concerns the determination of the manifestly covariant continuum Hamiltonian structure underlying the Einstein field equations and the related formulation of the corresponding covariant Hamilton-Jacobi theory. The task is achieved by adopting a synchronous variational principle requiring distinction between the prescribed deterministic metric tensor g(r) ≡ {g_μ_ν(r)} solution of the Einstein field equations which determines the geometry of the background space-time and suitable variational fields x ≡ {g,π} obeying an appropriate set of continuum Hamilton equations, referred to here as GR-Hamilton equations. It is shown that a prerequisite for reaching such a goal is that of casting the same equations in evolutionary form by means of a Lagrangian parametrization for a suitably reduced canonical state. As a result, the corresponding Hamilton-Jacobi theory is established in manifestly covariant form. Physical implications of the theory are discussed. These include the investigation of the structural stability of the GR-Hamilton equations with respect to vacuum solutions of the Einstein equations, assuming that wave-like perturbations are governed by the canonical evolution equations. (orig.)

  6. Lactobacillus rhamnosus GR-1 Ameliorates Escherichia coli-Induced Inflammation and Cell Damage via Attenuation of ASC-Independent NLRP3 Inflammasome Activation.

    Science.gov (United States)

    Wu, Qiong; Liu, Ming-Chao; Yang, Jun; Wang, Jiu-Feng; Zhu, Yao-Hong

    2016-02-15

    Escherichia coli is a major environmental pathogen causing bovine mastitis, which leads to mammary tissue damage and cell death. We explored the effects of the probiotic Lactobacillus rhamnosus GR-1 on ameliorating E. coli-induced inflammation and cell damage in primary bovine mammary epithelial cells (BMECs). Increased Toll-like receptor 4 (TLR4), NOD1, and NOD2 mRNA expression was observed following E. coli challenge, but this increase was attenuated by L. rhamnosus GR-1 pretreatment. Immunofluorescence and Western blot analyses revealed that L. rhamnosus GR-1 pretreatment decreased the E. coli-induced increases in the expression of the NOD-like receptor family member pyrin domain-containing protein 3 (NLRP3) and the serine protease caspase 1. However, expression of the adaptor protein apoptosis-associated speck-like protein (ASC, encoded by the Pycard gene) was decreased during E. coli infection, even with L. rhamnosus GR-1 pretreatment. Pretreatment with L. rhamnosus GR-1 counteracted the E. coli-induced increases in interleukin-1β (IL-1β), -6, -8, and -18 and tumor necrosis factor alpha mRNA expression but upregulated IL-10 mRNA expression. Our data indicate that L. rhamnosus GR-1 reduces the adhesion of E. coli to BMECs, subsequently ameliorating E. coli-induced disruption of cellular morphology and ultrastructure and limiting detrimental inflammatory responses, partly via promoting TLR2 and NOD1 synergism and attenuating ASC-independent NLRP3 inflammasome activation. Although the residual pathogenic activity of L. rhamnosus, the dosage regimen, and the means of probiotic supplementation in cattle remain undefined, our data enhance our understanding of the mechanism of action of this candidate probiotic, allowing for development of specific probiotic-based therapies and strategies for preventing pathogenic infection of the bovine mammary gland. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  7. Validation of HPLC, DPPH• and nitrosation methods for mesalamine determination in pharmaceutical dosage forms Validação dos métodos de CLAE, DPPH• e nitrosação para determinação de mesalazina em formas farmacêuticas

    Directory of Open Access Journals (Sweden)

    Janice Aparecida Rafael

    2007-03-01

    Full Text Available Mesalamine (5-aminosalicylic acid, 5-ASA is used because of its local effects in the treatment of inflammatory bowel disease. Therefore, the aims of this work were to compare and validate three analytical methods for the quality control of commercial coated tablets containing 5-ASA: high performance liquid chromatography (HPLC, 1,1-diphenyl-2-picrylhydrazyl radicals (DPPH• and nitrosation. The parameters linearity, precision and accuracy were studied in this work. HPLC with ultraviolet detection at 254 nm was carried out with a C18 column and a mobile phase constituted of 30 mmol/L monobasic phosphate buffer (pH 7.0 and methanol (70:30; v/v, with 25% tetrabutylammonium hydrogen sulphate. The DPPH• method was performed at 517 nm and using 100 mmol/L acetate buffer, pH 5.5, ethanol and 250 µmol/L ethanolic solution of DPPH•. The nitrosation method was accomplished by using a platinum electrode and standard 0.1 mol/L sodium nitrite as titrant solution. Repeatability (intra-day and intermediate precision (inter-day, expressed as RSD, were lower than 3%. The experimental recoveries were between 72.5 and 99.9%. Statistical analysis by one-way ANOVA, followed by the multiple comparison test of Bonferroni showed no significant difference among the three methods. All proposed methods can be used for the reliable quantitation of 5-ASA in pharmaceutical dosage forms.Mesalazina (ácido 5-aminosalicílico, 5-ASA é utilizado devido seu efeito local no tratamento de doença inflamatória intestinal. Assim, o objetivo deste trabalho foi comparar e validar três métodos analíticos para o controle de qualidade de comprimidos comerciais revestidos contendo 5-ASA: cromatografia líquida de alta eficiência (CLAE, radical 1,1-difenil-2-picril-hidrazil (DPPH• e nitrosação. Os parâmetros linearidade, precisão e exatidão foram estudados neste trabalho. CLAE com detecção ultravioleta em 254 nm foi realizada utilizando coluna C18 e a eluição em fase m

  8. Understanding the glass-forming ability of active pharmaceutical ingredients for designing supersaturating dosage forms.

    Science.gov (United States)

    Kawakami, Kohsaku; Usui, Toshinori; Hattori, Mitsunari

    2012-09-01

    Amorphous solid dispersions have great potential for enhancing oral absorption of poorly soluble drugs. Crystallization behavior during storage and after exposure to aqueous media must be examined in detail for designing stable and effective amorphous formulations, and it is significantly affected by the intrinsic properties of an amorphous drug. Many attempts have been made to correlate various thermodynamic parameters of pharmaceutical glasses with their crystallization behavior; however, variations in model drugs that could be used for such investigation has been limited because the amorphous characteristics of drugs possessing a high crystallization tendency are difficult to evaluate. In this study, high-speed differential scanning calorimetry, which could inhibit their crystallization using high cooling rates up to 2000°C/s, was employed for assessing such drugs. The thermodynamic parameters of the glasses, including glass transition temperature (T(g)) and fragility, were obtained to show that their crystallization tendency cannot be explained simply by the parameters, although there have been general thought that fragility may be correlated with crystallization tendency. Also investigated was correlation between the thermodynamic parameters and crystallization tendency upon contact with water, which influences in vivo efficacy of amorphous formulations. T(g) was correlated well with the crystallization tendency upon contact with water. Copyright © 2012 Wiley Periodicals, Inc.

  9. Dosage of DTPA administration by inhalation

    International Nuclear Information System (INIS)

    Koizumi, Akira; Fukuda, Satoshi; Yamada, Yuji; Iida, Haruzo; Shimo, Michikuni

    2000-01-01

    The administration of DTPA by inhalation was examined as an emergency medical treatment. In order to estimate the practical dosage to the human, an accurate model of the human air way was connected to a anesthetizer and respiration was simulated. Ca-DTPA, aerosolized by an ultra-sonic nebulizer, was administered by inhalation to the model. For the experiments, the respiratory volume (tidal volume) and the respiration rate was 12 per minute. Irrigation water from the model of larynx and mouth, and the air filter were collected and measured by chelate titration in order to determine the quantity of aerosolized DTPA and the amount deposited on the trachea and lang. The results indicated that the quantity of aerosolized DTPA varied with dilution of the DTPA solution in a ample. It was found that a 3 time dilution was the most practical and that 73 mg of DTPA per minute could be aerosolized. Furthermore, the results indicated that 46% of the aerosolized DTPA was taken in through inhalation and that 26% of DTPA was deposited in the trachea and lung. These results suggest that in practical application in the emergency medical treatment, 15 minutes of inhalation could delivered to approximately 500 mg of DTPA, and 130 mg could be delivered to the trachea and lung. It is considered that these quantity are enough amount to increase the effects of radioactive nuclides from the body, comparing with the recommended dosage for injection administration. (author)

  10. On a polynomial inequality of P. Erdős and T. Grünwald

    Directory of Open Access Journals (Sweden)

    Rahman QI

    1999-01-01

    Full Text Available Let be a polynomial with only real zeros having , as consecutive zeros. It was proved by P. Erdős and T. Grünwald that if on , then the ratio of the area under the curve to the area of the tangential rectangle does not exceed . The main result of our paper is a multidimensional version of this result. First, we replace the class of polynomials considered by Erdős and Grünwald by the wider class consisting of functions of the form , where is logarithmically concave on , and show that their result holds for all functions in . More generally, we show that if and , then for all , the integral does not exceed . It is this result that is extended to higher dimensions. Our consideration of the class is crucial, since, unlike the narrower one of Erdős and Grünwald, its definition does not involve the distribution of zeros of its elements; besides, the notion of logarithmic concavity makes perfect sense for functions of several variables.

  11. Reconstruction of Grønfjordbreen dynamics (West Spitsbergen in the Holocene

    Directory of Open Access Journals (Sweden)

    O. V. Kokin

    2017-01-01

    Full Text Available In the past 80 years, the Grønfjord Glacier front retreated for a distance longer than 2.5 km, and thus, a big part of the proglacial zone became free of ice. The detailed geomorphological survey of this zone made pos‑ sible to identify the following landforms: exaration-glacial, glacial-accumulative, exaration-extrusive, pushmoraine (thrusting, fluvioglacial and limnoglacial ones. Geomorphological analysis of the forms indicat‑ ing the Grønfjord Glacier movement and degradation allowed establishing its dynamics over the last glacial cycle. The river running from the moraine-dammed lake erodes a great thickness of a push-moraine (up to 20‑25  m which is composed by marine sediments, accumulated on the site of the present-day proglacial zone under a relatively higher sea level than now. Careful investigation of lithology and stratigraphy of the push-moraine together with radiocarbon dating of marine shells resulted in determination of chronology of the main sedimentation stages during the Holocene within area of the present-day proglacial zone. During the reconstruction evidences of only two stages of the significant Grønfjord Glacier advance were revealed: in the early Holocene (9.5‑10 thousand years ago and in the little ice age (before beginning of XX century, with the maximum advance at the last stage. Basing on the results of the reconstruction the suggestion had been made that during the little ice age the Grønfjord Glacier was a surging one.

  12. Gr/gr deletions on Y-chromosome correlate with male infertility: an original study, meta-analyses, and trial sequential analyses

    Science.gov (United States)

    Bansal, Sandeep Kumar; Jaiswal, Deepika; Gupta, Nishi; Singh, Kiran; Dada, Rima; Sankhwar, Satya Narayan; Gupta, Gopal; Rajender, Singh

    2016-02-01

    We analyzed the AZFc region of the Y-chromosome for complete (b2/b4) and distinct partial deletions (gr/gr, b1/b3, b2/b3) in 822 infertile and 225 proven fertile men. We observed complete AZFc deletions in 0.97% and partial deletions in 6.20% of the cases. Among partial deletions, the frequency of gr/gr deletions was the highest (5.84%). The comparison of partial deletion data between cases and controls suggested a significant association of the gr/gr deletions with infertility (P = 0.0004); however, the other partial deletions did not correlate with infertility. In cohort analysis, men with gr/gr deletions had a relatively poor sperm count (54.20 ± 57.45 million/ml) in comparison to those without deletions (72.49 ± 60.06), though the difference was not statistically significant (p = 0.071). Meta-analysis also suggested that gr/gr deletions are significantly associated with male infertility risk (OR = 1.821, 95% CI = 1.39-2.37, p = 0.000). We also performed trial sequential analyses that strengthened the evidence for an overall significant association of gr/gr deletions with the risk of male infertility. Another meta-analysis suggested a significant association of the gr/gr deletions with low sperm count. In conclusion, the gr/gr deletions show a strong correlation with male infertility risk and low sperm count, particularly in the Caucasian populations.

  13. mKikGR, a monomeric photoswitchable fluorescent protein.

    Directory of Open Access Journals (Sweden)

    Satoshi Habuchi

    Full Text Available The recent demonstration and utilization of fluorescent proteins whose fluorescence can be switched on and off has greatly expanded the toolkit of molecular and cell biology. These photoswitchable proteins have facilitated the characterization of specifically tagged molecular species in the cell and have enabled fluorescence imaging of intracellular structures with a resolution far below the classical diffraction limit of light. Applications are limited, however, by the fast photobleaching, slow photoswitching, and oligomerization typical for photoswitchable proteins currently available. Here, we report the molecular cloning and spectroscopic characterization of mKikGR, a monomeric version of the previously reported KikGR that displays high photostability and switching rates. Furthermore, we present single-molecule imaging experiments that demonstrate that individual mKikGR proteins can be localized with a precision of better than 10 nanometers, suggesting their suitability for super-resolution imaging.

  14. Stofmisbrugsbehandling blandt grønlændere i Danmark

    DEFF Research Database (Denmark)

    Baviskar, Siddhartha

    2016-01-01

    undersøgelsen af en forløbsanalyse af en udvalgt gruppe på 221 grønlændere over en 5-årig periode, 2007-2011. Denne gruppe ankom for første gang til Danmark i 2007 og opholdt sig i landet i alle årene til og med 2011. Dermed opnår vi viden om både graden af sårbarhed blandt grønlænderne på stofmisbrugsområdet...... målt i forhold til de øvrige danskere, og hvordan grønlændernes sårbarhed ændrer sig over tid i Danmark. Oplysninger vedrørende stofmisbrugsbehandling stammer fra Register over stofmisbrugere i behandling (SIB), som er et register over borgere, der gennem deres kommune er visiteret til behandling...

  15. Gründerzeit – Od skandalu do stylu

    OpenAIRE

    Jacek K. Knothe

    2017-01-01

    Przyjmuje się, iż architektura ‘okresu założycieli’ – ‘Grűnderzeit’ występowała w Niemczech w latach 1870-1920, to jest dłużej niż do zakończenia I wojny światowej stanowiącej swoistą cezurę XX wieku. Na terenie Polski, w miarę rozprzestrzeniania się przychodzącego z Europy postępu technicznego, styl Grűnderzeit następował pod koniec XIX wieku z niewielkim tylko opóźnieniem w stosunku do Niemiec, a wraz z nim jeszcze 12 stylów okresu historyzmu. Budynki z okresu Grűnderzeit, powszechnie obecn...

  16. Gráficos difusos versus gráficos tradicionales para el control de procesos por atributos

    Directory of Open Access Journals (Sweden)

    Vivian Lorena Chud Pantoja

    2017-05-01

    Full Text Available Los gráficos de control son una buena herramienta controlar procesos. Han sido ampliamente utilizados —y aún ahora se utilizan— en la mayoría de los procesos manufactureros. Sin embargo, se han presentado propuestas orientadas a mejorar el desempeño de los mismos, principalmente en los aspectos referentes a la incertidumbre y ambigüedad existente en los datos. En este sentido, los gráficos de control difusos son una alternativa valiosa para mejorar el desempeño de los gráficos tradicionales. Se presenta, entonces, una comparación de los gráficos de control Shewhart (tradicionales y los gráficos de control difusos por atributos, con el objetivo de establecer las similitudes y diferencias existentes entre las dos metodologías. De esta manera, se desarrolla un ejemplo numérico de un gráfico tradicional c y gráficos difusos construidos a partir de las siguientes técnicas de transformación: moda difusa, mediana difusa, rango medio difuso y enfoque difuso directo. Para realizar una comparación se utilizaron las reglas de evaluación de patrones de comportamiento no natural en un gráfico de control. A partir de los resultados de la comparación realizada en esta investigación se concluye que al utilizar las reglas de evaluación en ambos gráficos con los mismos datos no se obtienen diferencias en los resultados. (Abstract. Control charts are the main tool in the process control. They have been widely used and are still used in most manufacturing processes. However, proposals have emerged that seek to improve their performance, mainly about topics which involve the vagueness and uncertainty of the data. In this sense, fuzzy control charts area an important alternative for improve the performance of control charts. We present a comparison of Shewhart control charts (traditional and fuzzy control charts for attributes with the aim of establishing similarities and differences between the two methodologies. We develop a numerical

  17. Grønt regnskab for boligområder

    DEFF Research Database (Denmark)

    Jensen, O.M.

    Grønne regnskaber har vundet indpas i virksomheder, kommuner og boligområder. Med denne rapport foreligger der en model og en metode for opstilling af et grønt regnskab, der kan anvendes på alle typer af boliger, boligbebyggelser og boligområder. Et tilhørende regneark kan hjemtages på SBI´s hjem......´s hjemmeside 'www.sbi.dk', eller det kan opstilles ved hjælp af anvisningerne i rapporten. Rapporten henvender sig til alle, der arbejder med energiledelse, boligforvaltning, økologisk boligbyggeri, byfornyelse, miljødebat og Agenda 21-arbejde....

  18. Oracle JDeveloper 11gR2 Cookbook

    CERN Document Server

    Haralabidis, Nick

    2012-01-01

    "Oracle JDeveloper 11gR2 Cookbook" is a practical cookbook which goes beyond the basics with immediately applicable recipes for building ADF applications at an intermediate-to-advanced level. If you are a JavaEE developer who wants to go beyond the basics of building ADF applications with Oracle JDeveloper 11gR2 and get hands on with practical recipes, this book is for you. You should be comfortable with general Java development principles, the JDeveloper IDE, and ADF basics

  19. Oracle BAM 11gR1 Handbook

    CERN Document Server

    Wang, Pete

    2012-01-01

    "Oracle BAM 11gR1 Handbook" is a practical best practices tutorial focused entirely on Oracle Business Activity Monitoring. An intermediate-to-advanced guide, step-by-step instructions and an accompanying demo project will help SOA report developers through application development and producing dashboards and reports. If you are a developer/report developer or SOA Architect who wants to learn valuable Oracle BAM best practices for monitoring your operations in real time, then "Oracle BAM 11gR1 Handbook" is for you. Administrators will also find the book useful. You should already be comfortabl

  20. Attenuated bioluminescent Brucella melitensis mutants GR019 (virB4), GR024 (galE), and GR026 (BMEI1090-BMEI1091) confer protection in mice.

    Science.gov (United States)

    Rajashekara, Gireesh; Glover, David A; Banai, Menachem; O'Callaghan, David; Splitter, Gary A

    2006-05-01

    In vivo bioluminescence imaging is a persuasive approach to investigate a number of issues in microbial pathogenesis. Previously, we have applied bioluminescence imaging to gain greater insight into Brucella melitensis pathogenesis. Endowing Brucella with bioluminescence allowed direct visualization of bacterial dissemination, pattern of tissue localization, and the contribution of Brucella genes to virulence. In this report, we describe the pathogenicity of three attenuated bioluminescent B. melitensis mutants, GR019 (virB4), GR024 (galE), and GR026 (BMEI1090-BMEI1091), and the dynamics of bioluminescent virulent bacterial infection following vaccination with these mutants. The virB4, galE, and BMEI1090-BMEI1091 mutants were attenuated in interferon regulatory factor 1-deficient (IRF-1(-/-)) mice; however, only the GR019 (virB4) mutant was attenuated in cultured macrophages. Therefore, in vivo imaging provides a comprehensive approach to identify virulence genes that are relevant to in vivo pathogenesis. Our results provide greater insights into the role of galE in virulence and also suggest that BMEI1090 and downstream genes constitute a novel set of genes involved in Brucella virulence. Survival of the vaccine strain in the host for a critical period is important for effective Brucella vaccines. The galE mutant induced no changes in liver and spleen but localized chronically in the tail and protected IRF-1(-/-) and wild-type mice from virulent challenge, implying that this mutant may serve as a potential vaccine candidate in future studies and that the direct visualization of Brucella may provide insight into selection of improved vaccine candidates.

  1. Enalapril dosage in progressive chronic nephropathy

    DEFF Research Database (Denmark)

    Elung-Jensen, Thomas; Heisterberg, Jens; Sonne, Jesper

    2005-01-01

    OBJECTIVE: In chronic renal failure, clearance of enalapril is reduced. Hence, a renoprotective effect may be achieved with lower doses than conventionally used. Since marked inter-patient variation in concentrations of enalaprilat has been shown in patients with renal failure despite equivalent...... dosage of enalapril, a direct comparison of the effect of high versus low plasma concentrations of enalaprilat on the progression of renal failure was undertaken. METHODS: Forty patients with a median glomerular filtration rate (GFR) of 17 (6-35) ml/min/1.73 m2 were studied in an open-label, randomised...... intervals by the plasma clearance of 51Cr-EDTA, and the individual rates of progression of renal failure were calculated as the slope of GFR versus time plot. RESULTS: In the high-concentration group, the median enalaprilat trough concentration was 92.9 ng/ml (21.8-371.0 ng/ml) and in the low...

  2. Tumor cell-released TLR4 ligands stimulate Gr-1+CD11b+F4/80+ cells to induce apoptosis of activated T cells.

    Science.gov (United States)

    Liu, Yan-Yan; Sun, Ling-Cong; Wei, Jing-Jing; Li, Dong; Yuan, Ye; Yan, Bin; Liang, Zhi-Hui; Zhu, Hui-Fen; Xu, Yong; Li, Bo; Song, Chuan-Wang; Liao, Sheng-Jun; Lei, Zhang; Zhang, Gui-Mei; Feng, Zuo-Hua

    2010-09-01

    Gr-1(+)CD11b(+)F4/80(+) cells play important roles in tumor development and have a negative effect on tumor immunotherapy. So far, the mechanisms underlying the regulation of their immunosuppressive phenotype by classical and alternative macrophage activation stimuli are not well elucidated. In this study, we found that molecules from necrotic tumor cells (NTC-Ms) stimulated Gr-1(+)CD11b(+)F4/80(+) cells to induce apoptosis of activated T cells but not nonstimulated T cells. The apoptosis-inducing capacity was determined by higher expression levels of arginase I and IL-10 relative to those of NO synthase 2 and IL-12 in Gr-1(+)CD11b(+)F4/80(+) cells, which were induced by NTC-Ms through TLR4 signaling. The apoptosis-inducing capacity of NTC-Ms-stimulated Gr-1(+)CD11b(+)F4/80(+) cells could be enhanced by IL-10. IFN-gamma may reduce the apoptosis-inducing capacity of Gr-1(+)CD11b(+)F4/80(+) cells only if their response to IFN-gamma was not attenuated. However, the potential of Gr-1(+)CD11b(+)F4/80(+) cells to express IL-12 in response to IFN-gamma could be attenuated by tumor, partially due to the existence of active STAT3 in Gr-1(+)CD11b(+)F4/80(+) cells and NTC-Ms from tumor. In this situation, IFN-gamma could not effectively reduce the apoptosis-inducing capacity of Gr-1(+)CD11b(+)F4/80(+) cells. Tumor immunotherapy with 4-1BBL/soluble programmed death-1 may significantly reduce, but not abolish the apoptosis-inducing capacity of Gr-1(+)CD11b(+)F4/80(+) cells in local microenvironment. Blockade of TLR4 signaling could further reduce the apoptosis-inducing capacity of Gr-1(+)CD11b(+)F4/80(+) cells and enhance the suppressive effect of 4-1BBL/soluble form of programmed death-1 on tumor growth. These findings indicate the relationship of distinct signaling pathways with apoptosis-inducing capacity of Gr-1(+)CD11b(+)F4/80(+) cells and emphasize the importance of blocking TLR4 signaling to prevent the induction of T cell apoptosis by Gr-1(+)CD11b(+)F4/80(+) cells.

  3. Confectionery-based dose forms.

    Science.gov (United States)

    Tangso, Kristian J; Ho, Quy Phuong; Boyd, Ben J

    2015-01-01

    Conventional dosage forms such as tablets, capsules and syrups are prescribed in the normal course of practice. However, concerns about patient preferences and market demands have given rise to the exploration of novel unconventional dosage forms. Among these, confectionery-based dose forms have strong potential to overcome compliance problems. This report will review the availability of these unconventional dose forms used in treating the oral cavity and for systemic drug delivery, with a focus on medicated chewing gums, medicated lollipops, and oral bioadhesive devices. The aim is to stimulate increased interest in the opportunities for innovative new products that are available to formulators in this field, particularly for atypical patient populations.

  4. CRTC2 Is a Coactivator of GR and Couples GR and CREB in the Regulation of Hepatic Gluconeogenesis.

    Science.gov (United States)

    Hill, Micah J; Suzuki, Shigeru; Segars, James H; Kino, Tomoshige

    2016-01-01

    Glucocorticoid hormones play essential roles in the regulation of gluconeogenesis in the liver, an adaptive response that is required for the maintenance of circulating glucose levels during fasting. Glucocorticoids do this by cooperating with glucagon, which is secreted from pancreatic islets to activate the cAMP-signaling pathway in hepatocytes. The cAMP-response element-binding protein (CREB)-regulated transcription coactivator 2 (CRTC2) is a coactivator known to be specific to CREB and plays a central role in the glucagon-mediated activation of gluconeogenesis in the early phase of fasting. We show here that CRTC2 also functions as a coactivator for the glucocorticoid receptor (GR). CRTC2 strongly enhances GR-induced transcriptional activity of glucocorticoid-responsive genes. CRTC2 physically interacts with the ligand-binding domain of the GR through a region spanning amino acids 561-693. Further, CRTC2 is required for the glucocorticoid-associated cooperative mRNA expression of the glucose-6-phosphatase, a rate-limiting enzyme for hepatic gluconeogenesis, by facilitating the attraction of GR and itself to its promoter region already occupied by CREB. CRTC2 is required for the maintenance of blood glucose levels during fasting in mice by enhancing the GR transcriptional activity on both the G6p and phosphoenolpyruvate carboxykinase (Pepck) genes. Finally, CRTC2 modulates the transcriptional activity of the progesterone receptor, indicating that it may influence the transcriptional activity of other steroid/nuclear receptors. Taken together, these results reveal that CRTC2 plays an essential role in the regulation of hepatic gluconeogenesis through coordinated regulation of the glucocorticoid/GR- and glucagon/CREB-signaling pathways on the key genes G6P and PEPCK.

  5. Det grønne uddannelsesimperativ

    Directory of Open Access Journals (Sweden)

    Niels Henrik Hooge

    2012-07-01

    Full Text Available The paper defines the green education imperative as a normative proposition that expresses a fundamental norm – sustainable development. The proposition combines directions for action, i.e. the right to receive environmental training and education and the duty to provide it, with a specific situation, resulting in an individual norm-based assessment. The imperative has two main interpretations: The strong version, which in its strongest form consists of binding norms that guarantee definitive subjective rights to ecological and sustainable training and education services and an obligation to provide them. The weak version signifies that students have a moral or non-mandatory right to receive environmental training and education, which is not related to any particular institution in any particular professional context at any particular point in time.

  6. IT-kriminalitet kender ingen grænser

    DEFF Research Database (Denmark)

    Langsted, Lars Bo

    2016-01-01

    I dag foregår mange kriminelle handlinger via internettet uden at der sættes mange spor i den fysiske verden. Samtidig kender internettet i sagens natur ingen grænser, og det giver udfordringer både for lovgiver, politi, anklagemyndighed og den enkelte borger....

  7. Hägune vesi / Igor Gräzin

    Index Scriptorium Estoniae

    Gräzin, Igor, 1952-

    2005-01-01

    Riigikogu liikme sõnul teostavad AS-i Tallinna Vesi aktsiate müüki samad inimesed, kelle tegevuse tulemusena sai linnapea Tõnis Palts maksuameti ettekirjutuse 12 miljoni suuruses summas. I. Gräzin on esitanud arupärimise, miks ei korraldatud konkurssi juriidiliste firmade vahel, miks valiti just see firma, kuid saadud vastused teda ei rahulda

  8. Igor Gräzin predlagajet suditsja s glavoi PASE

    Index Scriptorium Estoniae

    2007-01-01

    Riigikogu liige Igor Gräzin arvab, et Eesti võiks kaaluda võimalust anda kohtusse ENPA president Rene van der Linden, kes on laimanud Eesti riiki. Riigikogu esimehe Ene Ergma kirjast ENPA presidendile Rene van Lindenile ja tema vastusest

  9. Common Concern for retsudviklingen i Grønland

    DEFF Research Database (Denmark)

    Basse, Ellen Margrethe; Sommer, Tine

    2013-01-01

    Artiklen behandler indledningsvis de komplekse kompetenceforhold, der er tale om i Grønland, og den udfordring som inuitterne står over for som konsekvens af klimaændringer og råstof- og olieindvindingsinteresser. Deres internationale menneskerettigheder og de globale miljøretlige forpligtelser o...

  10. WORKS OF GR. SKOVORODA IN THE THOUGHT OF DM. CHIZHEVSKY: SEVERAL REFLECTIONS

    Directory of Open Access Journals (Sweden)

    O. MARCHENKO

    2009-08-01

    Full Text Available In the article a number of positions, formed in research of life and work of outstanding Ukrainian Slavicist D. I. Chizhevsky (1894–1977 is under discussion. Russian and Ukrainian contexts in which frames Chizhevskys’ studying of works of famous philosopher of 18 century Gr. S. Skovoroda emerged is specially analyzed. On this background the author outlines a special task of Chizhevsky himself — to understand Skovoroda, at fi rst, in the context of Ukrainian culture, as a represent of later Ukrainian baroque and Ukrainian pre-romanticism, and secondly, to examine his ideas in the context of European culture.

  11. Dosage of strontium 90 in human bone ashes; Dosage du strontium 90 sans les cendres d'os humain

    Energy Technology Data Exchange (ETDEWEB)

    Patti, F; Jeanmaire, L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    The determination of {sup 90}Sr in bones by dosage of its daughter product {sup 90}Y is a 4-step process: 1) elimination of the phosphate ions by precipitation of the Ca and Sr as oxalate in the presence of acid; 2) reduction in the calcium concentration to a suitable level by the addition of a known volume of nitric acid (a single precipitation is sufficient), the precipitation yield of the strontium nitrate is checked by the measurement of the amount of {sup 85}Sr added as tracer; 3) purification by a yttrium hydroxide precipitation; 4) extraction at equilibrium of the {sup 90}Y which is counted to give the concentration. By using 50 gm of ash it is possible to detect about 0.1 pCi of {sup 90}Sr per gram of calcium. The advantages of this technique: -) treatment of a large quantity of bone ash -) the use of a small volume of nitric acid (less than 2 ml/g of ash, and -) the various operations present no difficulty. (authors) [French] Determination du Sr dans les os par dosage de son produit de filiation {sup 90}Y. Principe du dosage: 1 - Eliminer les ions phosphates par precipitation du calcium et du strontium sous forme d'oxalate en milieu acide. 2 - Reduire la concentration en calcium a un niveau convenable par addition d'un volume determine d'acide nitrique (une seule precipitation est necessaire). Le rendement de precipitation du nitrate de strontium est controle par la mesure de {sup 85}Sr ajoute comme traceur. 3 - Purifier par une precipitation d'hydroxyde d'yttrium. 4 - Extraire a l'equilibre l'{sup 90}Y qui eat compte pour determiner le {sup 90}Sr. En traitant 50 g de cendre, il est possible de deceler de l'ordre de 0,1 pCi de {sup 90}Sr par gramme de calcium. Les 3 avantages de cette technique: 1 - traitement d'une quantite importante de cendres d'os, 2 - emploi d'un faible volume d'acide nitrique (moins de 2 ml/g de cendres), et 3 - les diverses operations ne presentent aucune difficulte.

  12. Friction Stir Welding of GR-Cop 84 for Combustion Chamber Liners

    Science.gov (United States)

    Russell, Carolyn K.; Carter, Robert; Ellis, David L.; Goudy, Richard

    2004-01-01

    GRCop-84 is a copper-chromium-niobium alloy developed by the Glenn Research Center for liquid rocket engine combustion chamber liners. GRCop-84 exhibits superior properties over conventional copper-base alloys in a liquid hydrogen-oxygen operating environment. The Next Generation Launch Technology program has funded a program to demonstrate scale-up production capabilities of GR-Cop 84 to levels suitable for main combustion chamber production for the prototype rocket engine. This paper describes a novel method of manufacturing the main combustion chamber liner. The process consists of several steps: extrude the GR-Cop 84 powder into billets, roll the billets into plates, bump form the plates into cylinder halves and friction stir weld the halves into a cylinder. The cylinder is then metal spun formed to near net liner dimensions followed by finish machining to the final configuration. This paper describes the friction stir weld process development including tooling and non-destructive inspection techniques, culminating in the successful production of a liner preform completed through spin forming.

  13. Gräzin : Tagasi tähendab edasi / Igor Gräzin ; interv. Urmas Lauri

    Index Scriptorium Estoniae

    Gräzin, Igor, 1952-

    2004-01-01

    Europarlamenti kandideeriva Igor Gräzini arvates oleks Eestile olnud kasulik EL-i astumisega veel kaks-kolm aastat oodata. Euroopa Liit peaks tagasi minema aastasse 1957, kui ta oli vabakaubandusassotsiatsioon, see võimaldaks USA-ga konkureerida, väidab autor

  14. Dosage of cesium 137 in radioactive wastes by the application of sodium tetraphenylborate; Dosage du cesium 137 dans les effluents radioactifs par le tetraphenylborate de sodium

    Energy Technology Data Exchange (ETDEWEB)

    Testemale, G; Girault, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    A simple technique of the dosage of {sup 137}Cs has been developed. The technique consists in the formation of cesium tetraphenyl borate, followed by a double extraction with isoamyl acetate, and washing of the organic phase. The counting of known parts of the cesium solution assaying of its purity by {gamma} spectrometry enable the determination of the {sup 137}Cs. The yield is about 98 per cent. (authors) [French] Une technique simple du dosage du {sup 137}Cs a ete mise au point. Elle consiste en une double extraction du tetraphenylborate de cesium forme par l'acetate d'isoamyle suivie d'un lavage de la phase organique. Des comptages sur des parties aliquotes de la solution de cesium et un controle de purete par spectrometrie {gamma} permettent la determination de cet element. Rendement: environ 98 pour cent. (auteurs)

  15. Gründerzeit – Od skandalu do stylu

    Directory of Open Access Journals (Sweden)

    Jacek K. Knothe

    2017-12-01

    Full Text Available Przyjmuje się, iż architektura ‘okresu założycieli’ – ‘Grűnderzeit’ występowała w Niemczech w latach 1870-1920, to jest dłużej niż do zakończenia I wojny światowej stanowiącej swoistą cezurę XX wieku. Na terenie Polski, w miarę rozprzestrzeniania się przychodzącego z Europy postępu technicznego, styl Grűnderzeit następował pod koniec XIX wieku z niewielkim tylko opóźnieniem w stosunku do Niemiec, a wraz z nim jeszcze 12 stylów okresu historyzmu. Budynki z okresu Grűnderzeit, powszechnie obecne w centrach polskich miast pomimo zniszczeń spowodowanych II wojną, stanowią zwykle obiekty najstarsze i choćby z tego powodu uznawane są za estetyczny kanon historycznej zabudowy mieszkaniowej. Zamiarem autora jest przywrócenie do literatury polskiej terminu Grűnderzeit jako bardziej precyzyjnie określającego styl niż termin ‘historyzm’, używany do opisania praktycznie każdej formy architektonicznej z okresu poprzedzającego modernizm. Autorowi chodzi też o spowodowanie w polskiej literaturze dekonstrukcji terminu ‘historyzm’ i wyodrębnienie z niego terminu Grűnderzeit, ponadto o rozprawienie się z funkcjonującymi na temat stylu Grűnderzeit uprzedzeniami oraz o wykazanie związków i wpływu tego stylu na architekturę tkanki miejskiej większości polskich miast, nie tylko tych położonych na zachód od Wisły. Bezrefleksyjność lub też pogląd, iż architektura z przełomu XIX i XX wieku na terenie Polski nie miała korzeni w XIX wiecznej architekturze Europy, a jeśli nawet miała, to na pewno nie były one niemieckie, w erze globalizmu która właśnie wtedy się rozpoczynała, nie wytrzymuje próby.

  16. Radiation dosage of various CT-methods in lung diagnostics

    International Nuclear Information System (INIS)

    Heinz-Peer, G.; Weninger, F.; Nowotny, R.; Herold, C.J.

    1996-01-01

    Introduction of the computed tomography index CTDI and the multiple scan average dose (MSAD) has led to standardization of the dose description in CT examinations. Despite the use of these dose parameters, many different dosages are reported in the literature for different CT methods. In addition, there is still a wide range of radiation dosimetry results reported for conventional CT, helical CT, and HRCT used in chest examinations. The variations in dosage are mainly due to difference in factors affecting the dose, i.e. beam geometry, beam quality, scanner geometry ('generation'), and operating parameters. In addition, CT dosimetry instrumentation and methodology make a contribution to dosages. Recent studies calculating differences in factors affecting dosage and CT dosimetry and using similar operating parameters, show similar results in CT dosimetry for conventional and helical CT. On the other hand, dosages for HRCT were greatly reduced. This was mainly caused by narrow beam collimation and increasing section spacing. (orig.) [de

  17. Gröbner Bases and Generation of Difference Schemes for Partial Differential Equations

    Directory of Open Access Journals (Sweden)

    Vladimir P. Gerdt

    2006-05-01

    Full Text Available In this paper we present an algorithmic approach to the generation of fully conservative difference schemes for linear partial differential equations. The approach is based on enlargement of the equations in their integral conservation law form by extra integral relations between unknown functions and their derivatives, and on discretization of the obtained system. The structure of the discrete system depends on numerical approximation methods for the integrals occurring in the enlarged system. As a result of the discretization, a system of linear polynomial difference equations is derived for the unknown functions and their partial derivatives. A difference scheme is constructed by elimination of all the partial derivatives. The elimination can be achieved by selecting a proper elimination ranking and by computing a Gröbner basis of the linear difference ideal generated by the polynomials in the discrete system. For these purposes we use the difference form of Janet-like Gröbner bases and their implementation in Maple. As illustration of the described methods and algorithms, we construct a number of difference schemes for Burgers and Falkowich-Karman equations and discuss their numerical properties.

  18. Hamiltonian approach to GR - Part 1: covariant theory of classical gravity

    Science.gov (United States)

    Cremaschini, Claudio; Tessarotto, Massimo

    2017-05-01

    A challenging issue in General Relativity concerns the determination of the manifestly covariant continuum Hamiltonian structure underlying the Einstein field equations and the related formulation of the corresponding covariant Hamilton-Jacobi theory. The task is achieved by adopting a synchronous variational principle requiring distinction between the prescribed deterministic metric tensor \\widehat{g}(r)≡ { \\widehat{g}_{μ ν }(r)} solution of the Einstein field equations which determines the geometry of the background space-time and suitable variational fields x≡ { g,π } obeying an appropriate set of continuum Hamilton equations, referred to here as GR-Hamilton equations. It is shown that a prerequisite for reaching such a goal is that of casting the same equations in evolutionary form by means of a Lagrangian parametrization for a suitably reduced canonical state. As a result, the corresponding Hamilton-Jacobi theory is established in manifestly covariant form. Physical implications of the theory are discussed. These include the investigation of the structural stability of the GR-Hamilton equations with respect to vacuum solutions of the Einstein equations, assuming that wave-like perturbations are governed by the canonical evolution equations.

  19. Den græske by i Afghanistan

    DEFF Research Database (Denmark)

    Hannestad, Lise

    2016-01-01

    Byen Ai Khanoum som blev udgravet i i 1960'erne i det nordøstlige Afghanistan blev grundlagt som følge af Alexander den Stores erobring af hele Nærorienten og frem til det nordlige Indien. Fundene viser en spændende blanding af græsk og nræorientalsk kultur......Byen Ai Khanoum som blev udgravet i i 1960'erne i det nordøstlige Afghanistan blev grundlagt som følge af Alexander den Stores erobring af hele Nærorienten og frem til det nordlige Indien. Fundene viser en spændende blanding af græsk og nræorientalsk kultur...

  20. Hjemløshed i Grønland

    DEFF Research Database (Denmark)

    Hansen, Knud Erik; Andersen, Hans Thor

    Rapporten giver en beskrivelse af karakteren af hjemløsheden i Grønland. Den beskriver forholdene for tre måder at være ude i hjemløshed på i Grønland, hvordan husstande når dertil og hvilke muligheder de har for at komme ud af hjemløsheden. I rapporten indgår beskrivelser af en række personers liv...... households get homeless and their options to get out of homelessness. The report contains descriptions of how a number of people live in homelessness. The three types are: Homeless with no fixed accommodation, resettled living in resettlement housing and homeless who are long-time living with family, friends...

  1. GR712RC- Dual-Core Processor- Product Status

    Science.gov (United States)

    Sturesson, Fredrik; Habinc, Sandi; Gaisler, Jiri

    2012-08-01

    The GR712RC System-on-Chip (SoC) is a dual core LEON3FT system suitable for advanced high reliability space avionics. Fault tolerance features from Aeroflex Gaisler’s GRLIB IP library and an implementation using Ramon Chips RadSafe cell library enables superior radiation hardness.The GR712RC device has been designed to provide high processing power by including two LEON3FT 32- bit SPARC V8 processors, each with its own high- performance IEEE754 compliant floating-point-unit and SPARC reference memory management unit.This high processing power is combined with a large number of serial interfaces, ranging from high-speed links for data transfers to low-speed control buses for commanding and status acquisition.

  2. Entsorgungswirtschaft zwischen Grünem Punkt und Dosenpfand

    OpenAIRE

    Johann Wackerbauer

    2003-01-01

    Die Zeiten der hohen Wachstumsraten in der Abfallentsorgung dürften vorbei sein. Die Nachfrage nach Entsorgungsleistungen wird stärker von der Umweltpolitik als von der allgemeinen Konjunkturentwicklung beeinflusst. Die Turbulenzen im Zusammenhang mit der Einführung der Pfandpflicht auf Einweggetränkeverpackungen und die Diskussion um die Monopolstellung der Gesellschaft »Der Grüne Punkt - Duales System Deutschland AG« im Bereich der Entsorgung von Verkaufsverpackungen haben die Entsorgungs...

  3. Minimal canonical comprehensive Gröbner systems

    OpenAIRE

    Manubens, Montserrat; Montes, Antonio

    2009-01-01

    This is the continuation of Montes' paper "On the canonical discussion of polynomial systems with parameters''. In this paper, we define the Minimal Canonical Comprehensive Gröbner System of a parametric ideal and fix under which hypothesis it exists and is computable. An algorithm to obtain a canonical description of the segments of the Minimal Canonical CGS is given, thus completing the whole MCCGS algorithm (implemented in Maple and Singular). We show its high utility for applications, suc...

  4.  Gadeplansarbejdets grænseposition - muligheder og dilemmaer

    DEFF Research Database (Denmark)

    Mørck, Line Lerche

    2010-01-01

    Artiklen giver et bud på, hvordan vi gennem grænsefællesskaber på tværs af etniske og sociale skel kan bevæge det etablerede samfund og de unge, så de unge kommer 'indenfor rækkevidde'. Der diskuteres muligheder og dilemmaer i et gadeplansarbejde, der mødes med forventninger om at skulle samarbej...

  5. The Effect of High and Low Antiepileptic Drug Dosage on Simulated Driving Performance in Person's with Seizures: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Alexander M. Crizzle

    2015-10-01

    Full Text Available Background: Prior studies examining driving performance have not examined the effects of antiepileptic drugs (AED’s or their dosages in persons with epilepsy. AED’s are the primary form of treatment to control seizures, but they are shown to affect cognition, attention, and vision, all which may impair driving. The purpose of this study was to describe the characteristics of high and low AED dosages on simulated driving performance in persons with seizures. Method: Patients (N = 11; mean age 42.1 ± 6.3; 55% female; 100% Caucasian were recruited from the Epilepsy Monitoring Unit and had their driving assessed on a simulator. Results: No differences emerged in total or specific types of driving errors between high and low AED dosages. However, high AED drug dosage was significantly associated with errors of lane maintenance (r = .67, p < .05 and gap acceptance (r = .66, p < .05. The findings suggest that higher AED dosages may adversely affect driving performance, irrespective of having a diagnosis of epilepsy, conversion disorder, or other medical conditions. Conclusion: Future studies with larger samples are required to examine whether AED dosage or seizure focus alone can impair driving performance in persons with and without seizures.

  6. Grüneisen parameter for gases and superfluid helium

    International Nuclear Information System (INIS)

    De Souza, Mariano; Menegasso, Paulo; Paupitz, Ricardo; Seridonio, Antonio; Lagos, Roberto E

    2016-01-01

    The Grüneisen ratio (Γ), i.e. the ratio of the thermal expansivity to the specific heat at constant pressure, quantifies the degree of anharmonicity of the potential governing the physical properties of a system. While Γ has been intensively explored in solid state physics, very little is known about its behavior for gases. This is most likely due to the difficulties posed in carrying out both thermal expansion and specific heat measurements in gases with high accuracy as a function of pressure and temperature. Furthermore, to the best of our knowledge a comprehensive discussion about the peculiarities of the Grüneisen ratio is still lacking in the literature. Here we report on a detailed and comprehensive overview of the Grüneisen ratio. Particular emphasis is placed on the analysis of Γ for gases. The main findings of this work are: (i) for the van der Waals gas Γ depends only on the co-volume b due to interaction effects, it is smaller than that for the ideal gas (Γ = 2/3) and diverges upon approaching the critical volume; (ii) for the Bose–Einstein condensation of an ideal boson gas, assuming the transition as first-order, Γ diverges upon approaching a critical volume, similarly to the van der Waals gas; (iii) for 4 He at the superfluid transition Γ shows a singular behavior. Our results reveal that Γ can be used as an appropriate experimental tool to explore pressure-induced critical points. (paper)

  7. Minedrift og miljø i Grønland

    DEFF Research Database (Denmark)

    Johansen, P.; Asmund, G.; Glahder, C. M.

    zink, som er frigjort fra de mineraler, som er brudt og oparbejdet. Forureningen kommer især fra tailings fra de anlæg, hvor indholdet af værdifulde mineraler i malmen er blevet adskilt og opkoncentreret. En anden vigtig forureningskilde har været såkaldt gråbjerg, dvs. brudt materiale, hvor......, at spe cielt bly ophober sig i høje koncentrationer i muslinger i tidevandszonen. Men der er også eksempler på, at fisk og rejer samt tangplanter får forhøjede blyværdier. Forstyrrelser I Grønland vil aktiviteter i forbindelse med minedrift og efterforskning af mine ra ler i mange tilfælde resultere i...... for eksempel sikre, at tailings og gråbjerg bliver deponeret på en måde, så frigørelse af metaller bliver væsentligt begrænset og ikke resulterer i, at forurenende stoffer bliver spredt over større områder. Der bliver også allerede ved godkendelsen af et mineprojekt udarbejdet en plan for, hvordan området skal...

  8. Rebound Attacks on the Reduced Grøstl Hash Function

    DEFF Research Database (Denmark)

    Mendel, Florian; Rechberger, C.; Schlaffer, Martin

    2010-01-01

    Grøstl is one of 14 second round candidates of the NIST SHA-3 competition. Cryptanalytic results on the wide-pipe compression function of Grøstl-256 have already been published. However, little is known about the hash function, arguably a much more interesting cryptanalytic setting. Also, Grøstl...

  9. Determining S-1 dosage at hospitals prioritizing cancer chemotherapy

    International Nuclear Information System (INIS)

    Morimoto, Shigefumi; Kitada, Noriaki; Anami, Setsuko

    2008-01-01

    Although it is recommended that the standard S-1 dosage should be based on how large the body surface area is, an on-site setting of the appropriate dosage is often lower than the standard one, depending on the individual's condition and considering possible side effects and so, on. Here, we investigated usage conditions for S-1 as a part of field training for expert pharmacists at our hospital that performs total clinical treatments. Decreases in dosage per day for elderly patients were although the standard dosage is generally determined according to the amount of a patient's body surface. We conducted a retrospective survey with a total 90 patients by creating a tree-diagram to identify a reduction standard. It was found that the S-1 dosage was decreased when there were side effects, aggravation in performance status, decrease in kidney function, old age, combined injection chemotherapy, and a decrease in radiation therapy performance. The dosage decreases without such medical reasons were seen in only 4 of the 90 patients. At hospitals giving priority to chemotherapy, it became clear that appropriate treatment was promoted by decreasing. The individual target dosage on the basis of daily medical examination. (author)

  10. Personage Column:Prof. Dr.Adolf Grünert%人物专栏:Adolf Grünert

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Adolf Grünert was born in 1938 in Neuleiningen, a lovely western village of Germany in Palatinate (Pfalz).The first seven years of his life were overshadowed by the war as he was living in the war region of western front.Despite of this, his childhood was deeply influenced by the outstanding care and shelter of his parents and the family-life.

  11. Fourteen days oral administration of therapeutic dosage of some ...

    African Journals Online (AJOL)

    Fourteen days oral administration of therapeutic dosage of some antibiotics reduced serum testosterone in male rats. FO Awobajo, Y Raji, II Olatunji-Bello, FT Kunle-Alabi, AO Adesanya, TO Awobajo ...

  12. Dosage compensation of serine-4 transfer RNA in Drosophila melanogaster

    International Nuclear Information System (INIS)

    Birchler, J.A.; Owenby, R.K.; Jacobson, K.B.

    1982-01-01

    A dosage series of the X chromosome site for serine-4 transfer RNA consisting of one of three copies in females and one to two in males was constructed to test whether transfer RNA expression is governed by dosage compensation. A dosage effect on the level of the serine-4 isoacceptor was observed in both females and males when the structural locus was varied. However, in males, each dose had a relatively greater expression so the normal one dose was slightly greater than the total female value and the duplicated male had the highest relative expression of all the types examined. Serine-4 levels in males and females from an isogenic Oregon-R stock were similar. Thus the transfer RNA levels conform to the expectations of dosage compensation

  13. Effects of Tempering Temperature and Path on the Microstructural and Mechanical Properties of ASTM Gr.92 Steel

    International Nuclear Information System (INIS)

    Han, C. H.; Baek, J. H.; Kim, S. H.; Lee, C. B.; Kim, Y. K.; Hong, S. I.

    2009-01-01

    SFR (Sodium-Cooled Fast Reactor) is one of the prospective nuclear reactor for the next generation (Gen-IV) systems. The fuel claddings in the SFR are subject to a high fast nuclear irradiation and a high temperature. Fuel technology is a key aspect of an SFR system, with implications for reactor safety, reactor operations, fuel reprocessing technology, and overall system economics. ASTM Gr.92 steel has been considered as the one of the main candidate fuel cladding materials in the design of SFR in that it has higher thermal conductivity as well as dimensional stability under irradiation when compared as austenitic stainless steel. The changes in microstructure and heat-treatment varying M 23 C 6 , MX, M 2 X, and precipitation by ASTM Gr.92 steels to improve high temperature mechanical properties is the attention. According to several researchers, it plays an important role in the mechanical properties of precipitates V, Nb, Cr, C, N as a form of MX and M 2 X precipitates. These fine precipitates formed in the sub- grain by preventing the movement of dislocations in high-temperature mechanical properties will contribute effectively. This study investigated the effects of tempering temperature and heat-treatment path on microstructure and mechanical properties of ASTM Gr.92 steels

  14. Study on the welding continuous cooling transformation and weldability of SA508Gr4 steel for nuclear pressure vessels

    International Nuclear Information System (INIS)

    Bai, Qingwei; Ma, Yonglin; Xing, Shuqing; Chen, Zhongyi

    2017-01-01

    SA508Gr4 is a newly developed high-strength steel for nuclear reactor pressure vessels. Its welding characteristics remain largely unexplored. In this work, the simulated heat affected zone continuous cooling transformation (SH-CCT) diagram of SA508Gr4 steel was constructed and the high-temperature cooling phase compositions and the properties of the heat affected zone (HAZ) were characterized using dilatometry and microscopic tests. The results show that the phase transformation in the HAZ was divided into bainite and martensite transformation stages. When 4.6 ≤ t_8_/_5 (the HAZ cooling time from 800 C to 500 C) ≤ 15 s, lath-shaped martensite was fully developed, resulting in extensive hardening and cold cracking in the HAZ, while the cooling time required to form the bainite completely exceeds 1 200 s. Thus, to improve weld quality, preheating to 196 C or higher is recommended.

  15. Study on the welding continuous cooling transformation and weldability of SA508Gr4 steel for nuclear pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Bai, Qingwei; Ma, Yonglin; Xing, Shuqing; Chen, Zhongyi [Inner Mongolia Univ. of Science and Technology, Baotou (China). School of Material and Metallurgy; Kang, Xiaolan [Baotou Vocational and Technical College (China)

    2017-02-15

    SA508Gr4 is a newly developed high-strength steel for nuclear reactor pressure vessels. Its welding characteristics remain largely unexplored. In this work, the simulated heat affected zone continuous cooling transformation (SH-CCT) diagram of SA508Gr4 steel was constructed and the high-temperature cooling phase compositions and the properties of the heat affected zone (HAZ) were characterized using dilatometry and microscopic tests. The results show that the phase transformation in the HAZ was divided into bainite and martensite transformation stages. When 4.6 ≤ t{sub 8/5} (the HAZ cooling time from 800 C to 500 C) ≤ 15 s, lath-shaped martensite was fully developed, resulting in extensive hardening and cold cracking in the HAZ, while the cooling time required to form the bainite completely exceeds 1 200 s. Thus, to improve weld quality, preheating to 196 C or higher is recommended.

  16. Reliability assessment of creep rupture life for Gr. 91 steel

    International Nuclear Information System (INIS)

    Kim, Woo-Gon; Park, Jae-Young; Kim, Seon-Jin; Jang, Jinsung

    2013-01-01

    Highlights: • Statistical analysis of a number of creep rupture data based on Z parameter. • Determination of the constant C in LM parameter and long-term creep life prediction. • Generation of random variables for Z s and Z cr by Monte-Carlo simulation in a SCRI model. • Examples for design application were reasonably drawn from the viewpoints of reliability. - Abstract: This paper presents reliability assessment of the long-term creep life of Gr. 91 steel, which is a major structural material for high temperature structural components of Generation-IV reactor systems. A number of creep rupture data for Gr. 91 steel were collected through literature surveys, and the long-term creep life was predicted by Larson–Miller parameter. A “Z parameter” method was used to describe the magnitude of the deviation of the creep rupture data to a master curve. A “Service Condition-creep Rupture property Interference (SCRI) model” based on the Z parameter was used to simultaneously consider the scattering of the creep rupture data of materials and the fluctuations of service conditions in reliability assessment. A statistical analysis of the creep rupture data was conducted by the Z parameter. To carry out the SCRI model, a number of random variables for Z s describing service conditions and Z cr describing the dispersion of the creep rupture data were generated using a Monte-Carlo simulation technique. As examples for application, the creep rupture life under a certain service conditions of Gr. 91 steel was reasonably drawn from the viewpoints of reliability

  17. Comparison on Mechanical Properties of SA508 Gr.3 Cl.1, Cl.2, and Gr.4N Low Alloy Steels for Pressure Vessels

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min-Chul; Park, Sang-Gyu; Lee, Bong-Sang [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, Ki-Hyoung [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-10-15

    In this study, microstructure and mechanical properties of SA508 Gr.3 Cl. 1, Cl.2, and Gr.4N low alloy steels are characterized to compare their properties. To evaluate the fracture toughness in the transition region, the master curve method according to ASTM E1921 was adopted in the cleavage transition region. Tensile tests and Charpy impact tests were also performed to evaluate the mechanical properties, and a microstructural investigation was carried out. The microstructure and mechanical properties of SA508 Gr.3 Cl.1, Cl2 and Gr.4N low alloy steels were characterized.. The predominant microstructure of SA508 Gr.4N model alloy is tempered martensite, while SA508 Gr.3 Cl.1 and Cl.2 steels show a typical tempered upper bainitic structure. SA508 Gr. 4N model alloy shows the best strength and transition behavior among the three SA508 steels. SA508 Gr.3 Cl.2 steel also has quite good strength, but there is a loss of toughness.

  18. Dokumentaalfilm "Maile Grünbergi värvilised maailmad" = "Maile Grünberg's colourful worlds": a documentary / Karin Paulus, Priit Põldme

    Index Scriptorium Estoniae

    Paulus, Karin, 1975-

    2015-01-01

    Sisearhitekt Maile Grünbergist ja 2014. aastal temast valminud dokumentaalfilmist "Maile Grünbergi värvilised maailmad". Režissöör Peeter Brambat, tegevprodutsent Priit Põldme, käsikiri Karin Paulus, Peeter Brambat, Priit Põldme. 2014. aasta Kultuurkapitali Arhitektuuripreemia kandidaat

  19. Study on corrosion resistance of A106Gr.B and A672Gr.B60 in dynamic water loop with high temperature and pressure

    International Nuclear Information System (INIS)

    Tian Jue; Wang Hui; Li Xinmin

    2014-01-01

    Due to the low carbon and low alloy Cr content, flow accelerates corrosion prone to have a serious impact on safety. AP1000 is the most advanced nuclear power technology in recent years. The plant used A672Gr.B60 as an alternative feed pipe to reduce the impact of flow accelerated corrosion. The impact of different flow rates, alkaline agent type and material property on A672Gr.B60 and A106Gr.B were characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectronic spectroscopy (XPS). After 336 h experiments were conducted, results show that the corrosion rate of A672Gr.B60 is much lower than that of A106Gr.B, and the density of oxidation film on A672Gr.B60 is superior to A106Gr.B. Ethanolamine (ETA) as an alkaline agent is better to reduce FAC to A106Gr.B, and it also can make the oxidation film become denser. Changes in flow rate will affect the size, shape and distribution of the oxide particles, and will also affect the thickness of the oxide film. Both of two materials were composed by Fe 3 O 4 . (authors)

  20. Phenotypic variation within European carriers of the Y-chromosomal gr/gr deletion is independent of Y-chromosomal background

    DEFF Research Database (Denmark)

    Krausz, C; Giachini, C; Xue, Y

    2008-01-01

    of duplications and the Y-chromosomal haplogroup were characterised. Although the study had good power to detect factors that accounted for >or=5.5% of the variation in sperm concentration, no such factor was found. A negative effect of gr/gr deletions followed by b2/b4 duplication was found within...

  1. ΛGR Centennial: Cosmic Web in Dark Energy Background

    Science.gov (United States)

    Chernin, A. D.

    The basic building blocks of the Cosmic Web are groups and clusters of galaxies, super-clusters (pancakes) and filaments embedded in the universal dark energy background. The background produces antigravity, and the antigravity effect is strong in groups, clusters and superclusters. Antigravity is very weak in filaments where matter (dark matter and baryons) produces gravity dominating in the filament internal dynamics. Gravity-antigravity interplay on the large scales is a grandiose phenomenon predicted by ΛGR theory and seen in modern observations of the Cosmic Web.

  2. Gröbner bases and convex polytopes

    CERN Document Server

    Sturmfels, Bernd

    1995-01-01

    This book is about the interplay of computational commutative algebra and the theory of convex polytopes. It centers around a special class of ideals in a polynomial ring: the class of toric ideals. They are characterized as those prime ideals that are generated by monomial differences or as the defining ideals of toric varieties (not necessarily normal). The interdisciplinary nature of the study of Gröbner bases is reflected by the specific applications appearing in this book. These applications lie in the domains of integer programming and computational statistics. The mathematical tools presented in the volume are drawn from commutative algebra, combinatorics, and polyhedral geometry.

  3. El periodismo gráfico durante la dictadura

    OpenAIRE

    Díaz, César Luis

    2017-01-01

    Este volumen del Centro de Estudios en Historia/Comunicación/Periodismo/Medios (CEHICOPEME), está dedicado al examen de ocho de los principales medios gráficos argentinos durante la última dictadura cívico-militar. Se trata de una decena de artículos que si bien fueron realizados como obras en sí mismas, no pueden ser aisladas de una forma de concebir la disciplina que las contiene, cuya matriz de producción se gestó en esta Facultad de Periodismo y Comunicación Social (UNLP) hace poco más de...

  4. The Drosophila Gr28bD product is a non-specific cation channel that can be used as a novel thermogenetic tool.

    Science.gov (United States)

    Mishra, Aditi; Salari, Autoosa; Berigan, Benton R; Miguel, Kayla C; Amirshenava, Marzie; Robinson, Abbey; Zars, Benjamin C; Lin, Jenna L; Milescu, Lorin S; Milescu, Mirela; Zars, Troy

    2018-01-17

    Extrinsic control of single neurons and neuronal populations is a powerful approach for understanding how neural circuits function. Adding new thermogenetic tools to existing optogenetic and other forms of intervention will increase the complexity of questions that can be addressed. A good candidate for developing new thermogenetic tools is the Drosophila gustatory receptor family, which has been implicated in high-temperature avoidance behavior. We examined the five members of the Gr28b gene cluster for temperature-dependent properties via three approaches: biophysical characterization in Xenopus oocytes, functional calcium imaging in Drosophila motor neurons, and behavioral assays in adult Drosophila. Our results show that Gr28bD expression in Xenopus oocytes produces a non-specific cationic current that is activated by elevated temperatures. This current is non-inactivating and non-voltage dependent. When expressed in Drosophila motor neurons, Gr28bD can be used to change the firing pattern of individual cells in a temperature-dependent fashion. Finally, we show that pan-neuronal or motor neuron expression of Gr28bD can be used to alter fruit fly behavior with elevated temperatures. Together, these results validate the potential of the Gr28bD gene as a founding member of a new class of thermogenetic tools.

  5. Dosage of trace carbon in sodium (1963)

    International Nuclear Information System (INIS)

    Sannier, J.; Vasseur, A.

    1963-01-01

    A wet method for dosing carbon in sodium has been developed. The carbon is oxidised in a vacuum using Van SLYKE'S solution. The carbonic acid formed is measured volumetrically; its purity can be controlled by chromatographic analysis. The results obtained show that this method makes it possible to measure carbon in concentrations of about 10 ppm. (authors) [fr

  6. Evaluation of students' knowledge about paediatric dosage calculations.

    Science.gov (United States)

    Özyazıcıoğlu, Nurcan; Aydın, Ayla İrem; Sürenler, Semra; Çinar, Hava Gökdere; Yılmaz, Dilek; Arkan, Burcu; Tunç, Gülseren Çıtak

    2018-01-01

    Medication errors are common and may jeopardize the patient safety. As paediatric dosages are calculated based on the child's age and weight, risk of error in dosage calculations is increasing. In paediatric patients, overdose drug prescribed regardless of the child's weight, age and clinical picture may lead to excessive toxicity and mortalities while low doses may delay the treatment. This study was carried out to evaluate the knowledge of nursing students about paediatric dosage calculations. This research, which is of retrospective type, covers a population consisting of all the 3rd grade students at the bachelor's degree in May, 2015 (148 students). Drug dose calculation questions in exam papers including 3 open ended questions on dosage calculation problems, addressing 5 variables were distributed to the students and their responses were evaluated by the researchers. In the evaluation of the data, figures and percentage distribution were calculated and Spearman correlation analysis was applied. Exam question on the dosage calculation based on child's age, which is the most common method in paediatrics, and which ensures right dosages and drug dilution was answered correctly by 87.1% of the students while 9.5% answered it wrong and 3.4% left it blank. 69.6% of the students was successful in finding the safe dose range, and 79.1% in finding the right ratio/proportion. 65.5% of the answers with regard to Ml/dzy calculation were correct. Moreover, student's four operation skills were assessed and 68.2% of the students were determined to have found the correct answer. When the relation among the questions on medication was examined, a significant relation (correlation) was determined between them. It is seen that in dosage calculations, the students failed mostly in calculating ml/dzy (decimal). This result means that as dosage calculations are based on decimal values, calculations may be ten times erroneous when the decimal point is placed wrongly. Moreover, it

  7. A topological extension of GR: Black holes induce dark energy

    International Nuclear Information System (INIS)

    Spaans, M

    2013-01-01

    A topological extension of general relativity is presented. The superposition principle of quantum mechanics, as formulated by the Feynman path integral, is taken as a starting point. It is argued that the trajectories that enter this path integral are distinct and thus that space-time topology is multiply connected. Specifically, space-time at the Planck scale consists of a lattice of three-tori that facilitates many distinct paths for particles to travel along. To add gravity, mini black holes are attached to this lattice. These mini black holes represent Wheeler's quantum foam and result from the fact that GR is not conformally invariant. The number of such mini black holes in any time-slice through four-space is found to be equal to the number of macroscopic (so long-lived) black holes in the entire universe. This connection, by which macroscopic black holes induce mini black holes, is a topological expression of Mach's principle. The proposed topological extension of GR can be tested because, if correct, the dark energy density of the universe should be proportional the total number of macroscopic black holes in the universe at any time. This prediction, although strange, agrees with current astrophysical observations.

  8. How secure are Grünbaum's Foundations?

    Science.gov (United States)

    Wax, M L

    1995-06-01

    As exemplified in Freud's cases, behaviour becomes meaningful as it is situated within a history (narrative). Operating from a Unity of Science orientation, Grünbaum emphasises causal rather than meaningful connections, and selectively follows early Freud: when (and only when) the repressed historical cause is uncovered, the symptom disappears. Since that consequential connection has proven to be not causally invariable Grünbaum discredits psychoanalysis as unscientific. Counterposed to his causal approach is that of philosopher MacIntyre, who contends that identity and moral responsibility must be situated within personal history. Also counterposed is sociologist Max Weber who struggled with parallel issues in the German 'Geisteswissenschaften' of Freud's time. The oedipal complex is akin to Weber's ideal types, as are the various models implicit in analytic discourse. Psychoanalysis must be understood as a normative science. In so far as contemporary psychology and psychiatry emphasise causal relationships, their procedures (experimental, epidemiological) can never hope to encompass psychoanalysis. Like other grand theoretical systems, psychoanalysis has applications in wide arenas--personal, developmental, familial, cultural, religious, historical, ethnological; its development during the last century has come from the interaction of findings from those arenas with those from the consulting room.

  9. Interruption with the Migration of Iodide by GR(CT)

    International Nuclear Information System (INIS)

    Min, J. H.; Lee, J. K.; Jeong, J. T.

    2012-01-01

    The purpose of this study is to understand the influence of green rust on the migration of iodide. GR(CT) would be major corrosion product of iron near the seawater or saline layer in underground. The GR(CT) may play an important role in the retardation of the iodide migration in a deep geological environment due to it's anionic exchange reaction. In underground radioactive waste repository, the corrosion of iron canisters would be proceed as follows; Fe(II) and/or Fe(III) dissolved from iron containers → Fe(II)(OH) 2 and/or Fe(III)(OH) 3 → Green rust → Lepidocrocite or Magnetite → Goetite etc. Generally, the green rust has known to exist in environments close to the Fe(Π)/Fe(ΠΙ) transition zone or between the oxidized layer and reduced layer in the underground. As anion exchanger and strong reducer, the green rusts can affect the migration of anions, reactions involving green rusts were poorly studied in relation to the safety assessment of radioactive waste repository

  10. Parental genome dosage imbalance deregulates imprinting in Arabidopsis.

    Directory of Open Access Journals (Sweden)

    Pauline E Jullien

    2010-03-01

    Full Text Available In mammals and in plants, parental genome dosage imbalance deregulates embryo growth and might be involved in reproductive isolation between emerging new species. Increased dosage of maternal genomes represses growth while an increased dosage of paternal genomes has the opposite effect. These observations led to the discovery of imprinted genes, which are expressed by a single parental allele. It was further proposed in the frame of the parental conflict theory that parental genome imbalances are directly mirrored by antagonistic regulations of imprinted genes encoding maternal growth inhibitors and paternal growth enhancers. However these hypotheses were never tested directly. Here, we investigated the effect of parental genome imbalance on the expression of Arabidopsis imprinted genes FERTILIZATION INDEPENDENT SEED2 (FIS2 and FLOWERING WAGENINGEN (FWA controlled by DNA methylation, and MEDEA (MEA and PHERES1 (PHE1 controlled by histone methylation. Genome dosage imbalance deregulated the expression of FIS2 and PHE1 in an antagonistic manner. In addition increased dosage of inactive alleles caused a loss of imprinting of FIS2 and MEA. Although FIS2 controls histone methylation, which represses MEA and PHE1 expression, the changes of PHE1 and MEA expression could not be fully accounted for by the corresponding fluctuations of FIS2 expression. Our results show that parental genome dosage imbalance deregulates imprinting using mechanisms, which are independent from known regulators of imprinting. The complexity of the network of regulations between expressed and silenced alleles of imprinted genes activated in response to parental dosage imbalance does not support simple models derived from the parental conflict hypothesis.

  11. Investigation of contrast agent dosage for perfusion-weighted MRI

    International Nuclear Information System (INIS)

    Erb, G.; Benner, T.; Heiland, S.; Reith, W.; Sartor, K.; Forsting, M.

    1997-01-01

    Purpose: In this study we investigated, whether increasing the dosage of a paramagnetic contrast agent results in a stronger signal decrease in T 2 *-weighted perfusion sequences and therefore more meaningful parameter maps. Material and methods: In a prospective study bolus injection of gadolinium-DTPA was performed at dosages of 0.1, 0.2, and 0.3 mmol/kg body weight (BW) in 10 patients each. Before, during and after bolus injection 40 T 2 *-weighted images of a reference brain slice were acquired within 65.6 seconds on a 1.0 T clinical scanner and perfusion parameters were calculated. Results: Due to the limited signal decrease during bolus passage and the resulting low signal-difference-to-noise ratio (ΔS/N) no reliable differentiation of gray and white matter was possible at a contrast agent dosage of 0.1 mmol/kg BW. Only at higher dosages, both, signal decrease and ΔS/N were strong enough to allow differentiation of gray and white matter and to yield reliable parameter maps. Conclusion: For meaningful MR perfusion imaging at 1.0 T and with the given sequence a contrast agent dosage of at least 0.2 mmol/kg BW is necessary, if a 0.5-molar contrast agent is used. (orig.) [de

  12. Comparison of SA508 Gr.3 and SA508 Gr.4N Low Alloy Steels for Reactor Pressure Vessel Steel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min Chul; Lee, B. S

    2009-12-15

    The microstructural characteristics and mechanical properties of SA508 Gr.3 Mn-Mo-Ni low alloy steel and SA508 Gr.4N Ni-Mo-Cr low alloy steel were investigated. The differences in the stable phases between these two low alloy steels were evaluated by means of a thermodynamic calculation using ThermoCalc. They were then compared to microstructural features and correlated with mechanical properties. Mn-Mo-Ni low alloy steel shows the upper bainite structure which has the coarse cementite in the lath boundaries. However, Ni-Mo-Cr low alloy steel shows the mixture of lower bainite and tempered martensite structure that homogeneously precipitates the small carbides such as M{sub 23}C{sub 6} and M{sub 7}C{sub 3} due to an increase of hardenability and Cr addition. In the mechanical properties, Ni-Mo-Cr low alloy steel has higher strength and toughness than Mn-Mo-Ni low alloy steel. Ni and Cr additions increase the strength by solid solution hardening. Besides, microstructural changes from upper bainite to tempered martensite improve the strength of the low alloy steel by grain refining effect. And the changes in the precipitation behavior by Cr addition improve the ductile-brittle transition behavior along with a toughening effect of Ni addition.

  13. Differential MR/GR Activation in Mice Results in Emotional States Beneficial or Impairing for Cognition

    Directory of Open Access Journals (Sweden)

    Vera Brinks

    2007-01-01

    Full Text Available Corticosteroids regulate stress response and influence emotion, learning, and memory via two receptors in the brain, the high‐affinity mineralocorticoid (MR and low‐affinity glucocorticoid receptor (GR. We test the hypothesis that MR- and GR-mediated effects interact in emotion and cognition when a novel situation is encountered that is relevant for a learning process. By adrenalectomy and additional constant corticosterone supplement we obtained four groups of male C57BL/6J mice with differential chronic MR and GR activations. Using a hole board task, we found that mice with continuous predominant MR and moderate GR activations were fast learners that displayed low anxiety and arousal together with high directed explorative behavior. Progressive corticosterone concentrations with predominant action via GR induced strong emotional arousal at the expense of cognitive performance. These findings underline the importance of a balanced MR/GR system for emotional and cognitive functioning that is critical for mental health.

  14. Doubled dosage of sofosbuviris expected for inhibiting Zika virus infection

    Institute of Scientific and Technical Information of China (English)

    Somsri Wiwanitkit; Viroj Wiwanitkit

    2017-01-01

    Sofosbuvir is a new antiviral drug that has been recommended for management of hepatitis C virus (HCV) for a few years. New researches support that sofosbuvir might be useful for the management of Zika virus infection. Based on the pharmacological activity, inhibiting the HCV RNA-dependent RNA polymerase (RdRp or NS5 protein), sofosbuvir is proposed for its effectiveness against Zika virus infection. Here, the authors used a mathematical modelling theoretical approach to predict the expected dosage of sofosbuvir for inhibiting Zika virus infection. Based on the modeling study, if sofosbuvir is assigned for management of Zika virus infection, doubled dosage of the present dosage for hepatitis C management is recommended.

  15. Dosage of boron traces in graphite, uranium and beryllium oxide

    International Nuclear Information System (INIS)

    Coursier, J.; Hure, J.; Platzer, R.

    1955-01-01

    The problem of the dosage of the boron in the materials serving to the construction of nuclear reactors arises of the following way: to determine to about 0,1 ppm close to the quantities of boron of the order of tenth ppm. We have chosen the colorimetric analysis with curcumin as method of dosage. To reach the indicated contents, it is necessary to do a previous separation of the boron and the materials of basis, either by extraction of tetraphenylarsonium fluoborate in the case of the boron dosage in uranium and the beryllium oxide, either by the use of a cations exchanger resin of in the case of graphite. (M.B.) [fr

  16. Evolution of vertebrate sex chromosomes and dosage compensation.

    Science.gov (United States)

    Graves, Jennifer A Marshall

    2016-01-01

    Differentiated sex chromosomes in mammals and other vertebrates evolved independently but in strikingly similar ways. Vertebrates with differentiated sex chromosomes share the problems of the unequal expression of the genes borne on sex chromosomes, both between the sexes and with respect to autosomes. Dosage compensation of genes on sex chromosomes is surprisingly variable - and can even be absent - in different vertebrate groups. Systems that compensate for different gene dosages include a wide range of global, regional and gene-by-gene processes that differ in their extent and their molecular mechanisms. However, many elements of these control systems are similar across distant phylogenetic divisions and show parallels to other gene silencing systems. These dosage systems cannot be identical by descent but were probably constructed from elements of ancient silencing mechanisms that are ubiquitous among vertebrates and shared throughout eukaryotes.

  17. Teaching Form as Form

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2012-01-01

    understanding of form per se, or, to use an expression from this text, of form as form. This challenge can be reduced to one question: how can design teaching support students in achieving not only the ability to recognize and describe different form-related concepts in existing design (i.e. analytical...

  18. "a view of life" - 18.-30.9.2007 (Sisimiut Museum, Grønland)

    DEFF Research Database (Denmark)

    Medonos, Jakub Christensen

    2007-01-01

    Udstilling af og om unge i Sisimiut, Grønland. I Forbindelse med forskningsprojektet; "Ungdom og urbanitet i Grønland - en undersøgelse af den urbane ungdomskultur i Sisimiut: kompetencer, kreativitet og visioner." Se: www.workshop2007.wordpress.com  ......Udstilling af og om unge i Sisimiut, Grønland. I Forbindelse med forskningsprojektet; "Ungdom og urbanitet i Grønland - en undersøgelse af den urbane ungdomskultur i Sisimiut: kompetencer, kreativitet og visioner." Se: www.workshop2007.wordpress.com  ...

  19. Evaluation of the effect of torsemide on warfarin dosage requirements.

    Science.gov (United States)

    Lai, Sophia; Momper, Jeremiah D; Yam, Felix K

    2017-08-01

    Background According to drug interaction databases, torsemide may potentiate the effects of warfarin. Evidence for this drug-drug interaction, however, is conflicting and the clinical significance is unknown. Objective The aim of this study is to evaluate the impact of torsemide initiation on warfarin dosage requirements. Setting This study was conducted at the Veterans Affairs Healthcare System in San Diego, California. Method A retrospective cohort study was conducted using Veterans Affairs data from patients who were converted from bumetanide to torsemide between March 2014 and July 2014. Patients were also prescribed and taking warfarin during the observation period. Warfarin dosage requirements were evaluated to determine if any changes occurred within the first 3 months of starting torsemide. Main outcome measure The primary outcome was the average weekly warfarin dose before and after torsemide initiation. Results Eighteen patients met study inclusion criteria. The weekly warfarin dose before and after initiation of torsemide was not significantly different (34 ± 15 and 34 ± 13 mg, p > 0.05). Of those eighteen patients, only two experienced elevations in INR that required a decrease in warfarin dosage after torsemide initiation. Between those two patients, dosage reductions ranged from 5.3 to 18%. Conclusion These results indicated that most patients did not require any warfarin dosage adjustments after torsemide was initiated. The potential for interaction, however, still exists. While empiric warfarin dosage adjustments are not recommended when initiating torsemide, increased monitoring is warranted to minimize the risk of adverse effects.

  20. Grøn Open Access i Praksis

    DEFF Research Database (Denmark)

    Open Access indikatoren påviste et uudnyttet potentiale på ca 60%, men hvorfor er der så ikke mere Open Access indhold?. I det konkrete arbejde med forskningsregistrering og registrering af post-prints støder bibliotekerne på en række udfordringer, som vanskeliggør institutionernes muligheder...... for at nå de nationale Open Access mål. Det er for eksempel inden for områderne rettigheder og licenser, tilladte Open Access versioner, embargoperioder m.m., at vi støder på problemer. Det er disse meget konkrete udfordringer, der arbejdes med i det kommende DEFF projekt ”Grøn Open Access i praksis”....

  1. CHAMAYOU, Grégoire. Teoria do drone.

    Directory of Open Access Journals (Sweden)

    Luiz Philipe de Caux

    2016-06-01

    Full Text Available É possível desvendar uma reconfiguração de normas e relações sociais e políticas, quiçá da própria estrutura dessas normas e relações, a partir da investigação da emergência de um artefato técnico? Tal é a questão de fundo que mobiliza o jovem filósofo francês Grégoire Chamayou, apresentado ao público brasileiro nesta bela edição da Cosac Naify, com competente tradução de Célia Euvaldo; questão que Chamayou ensaia res-ponder indo diretamente à coisa.

  2. Dosage-based parameters for characterization of puff dispersion results.

    Science.gov (United States)

    Berbekar, Eva; Harms, Frank; Leitl, Bernd

    2015-01-01

    A set of parameters is introduced to characterize the dispersion of puff releases based on the measured dosage. These parameters are the dosage, peak concentration, arrival time, peak time, leaving time, ascent time, descent time and duration. Dimensionless numbers for the scaling of the parameters are derived from dimensional analysis. The dimensionless numbers are tested and confirmed based on a statistically representative wind tunnel dataset. The measurements were carried out in a 1:300 scale model of the Central Business District in Oklahoma City. Additionally, the effect of the release duration on the puff parameters is investigated. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Põhjamaade kultuurikeskus Nuuk`is Gröönimaal = Pohjoismainen kulttuurikekus, Nuuk, Grönlanti / Mikko Heikkinen, Markku Komonen

    Index Scriptorium Estoniae

    Heikkinen, Mikko

    1993-01-01

    Põhjamaade kultuurikeskuse ehitamiseks Gröönimaale Nuuḱi linna korraldati 1993.a. rahvusvaheline arhitektuurikonkurss. Artiklis on tutvustatud soome arhitektide Mikko Heikkineni ja Markku Komoneni võistlustööd

  4. L-carnosine modulates respiratory burst and reactive oxygen species production in neutrophil biochemistry and function: may oral dosage form of non-hydrolized dipeptide L-carnosine complement anti-infective anti-influenza flu treatment, prevention and self-care as an alternative to the conventional vaccination?

    Science.gov (United States)

    Babizhayev, Mark A; Deyev, Anatoliy I; Yegorov, Yegor E

    2014-05-01

    compounds, and suggest important interactions between neutrophills and carnosine related compounds in the host response to viruses and bacteria. Carnosine and anserine were also found to reduce apoptosis of human neutrophils. In this way these histidine-containing compounds can modulate the Influenza virus release from neutrophills and reduce virus dissemination through the body of the organism. This review points the ability of therapeutic control of Influenza viral infections associated with modulation by oral nonhydrolized forms of carnosine and related histidine-containg compounds of PMN apoptosis which may be involved at least in part in the pathophysiology of the disease in animals and humans. The data presented in this article, overall, may have implications for global influenza surveillance and planning for pandemic influenza therapeutic prevention with oral forms of non-hydrolized natural L-carnosine as a suitable alternative to the conventional vaccination for various flu ailments.

  5. Effect of lead acetate administered orally at different dosage levels ...

    African Journals Online (AJOL)

    The project was conducted to evaluate the effect of lead administered as lead acetate at different dosage levels via drinking water in broiler chicks. Thirty-five healthy chicks were divided into seven groups (five chicks each) and one group was kept as un-medicated control. Groups A, B, C, D, E and F were medicated with ...

  6. Quality of 'Climax' blueberries after low dosage electron beam irradiation

    International Nuclear Information System (INIS)

    Miller, W.R.; McDonald, R.E.; McCollum, T.G.; Smittle, B.J.

    1994-01-01

    Fruit of 'Climax' rabbiteye blueberries (Vaccinium ashei Reade) were irradiated by a linear accelerator at 0, 0.25, 0.5, 0.75, 1.0, and 1.25 kGy and evaluated for various quality attributes after storage for 1, 3, 7, or 14 days at 1C plus 2 days at 15C, respectively. Weight loss increased during storage and averaged 4.2% after the final inspection and was not affected by irradiation dosage. About 5% of total berries were decayed after 14 days at 1C, about 6% after the final inspection at 15C, but decay was not affected by the level of irradiation. Electrolyte leakage, skin color, total soluble solids, acidity, and pH were also not affected by irradiation dosage. There was a significant decline in berry firmness, flavor, and texture as dosage increased. Berries treated at 1.0 kGy or above were softer and had lower flavor and texture preference scores than berries treated at lower dosages or nontreated berries

  7. Dosage plasmatique et globulaire du magnesium dans l'exploration ...

    African Journals Online (AJOL)

    Objectives: The allergic rhinitis represents a real public health problem. The goal of this survey is to value the interest of the dosage plasmatical and globular of magnesium in the diagnosis of the allergic rhinitis. Materials and methods : Analytic and prospective survey of 80 files, on one period of 4 years and 5 months (from ...

  8. Dosage Compensation of an Aneuploid Genome in Mouse Spermatogenic Cells

    Czech Academy of Sciences Publication Activity Database

    Jansa, Petr; Homolka, David; Blatný, Radek; Mistrik, M.; Bartek, Jiří; Forejt, Jiří

    2014-01-01

    Roč. 90, č. 6 (2014), 124/1-124/9 ISSN 0006-3363 R&D Projects: GA ČR GA13-08078S Institutional support: RVO:68378050 Keywords : gene dosage * male sterility * segmental trisomy * meiotic silencing of unsynapsed chromatin * DOWN-SYNDROME * MAMMALIAN MEIOSIS Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.318, year: 2014

  9. Gonadal dosage during hip dysplasia radiography in the dog.

    Science.gov (United States)

    Wood, A K; Reynolds, K M; Leith, I S; Burns, P A

    1977-01-01

    Thermoluminescent dosemeters were used to estimate gonadal dosage during hip dysplasia radiography of labrador retriever dogs. The mean radiation dose to the unshielded testes was 100 millirad (mrad) and the estimated dose to the shielded testes was 9 mrad. It was considered unnecessary to shield the ovaries.

  10. Fuzzy-based dosage model of aqueous decoction of Adansonia ...

    African Journals Online (AJOL)

    However, in the area of traditional medicine, no much attention has been given to its enhancement with the use of information technology especially in the area of herbal prescription. ... The mass of herb and volume of solvent were used as input parameters to design the dosage model, and simulated using MATLAB.

  11. Dosage Compensation of an Aneuploid Genome in Mouse Spermatogenic Cells

    Czech Academy of Sciences Publication Activity Database

    Jansa, Petr; Homolka, David; Blatný, Radek; Mistrik, M.; Bartek, Jiří; Forejt, Jiří

    2014-01-01

    Roč. 90, č. 6 (2014), 124/1-124/9 ISSN 0006-3363 R&D Projects: GA ČR GA13-08078S Institutional support: RVO:68378050 Keywords : gene dosage * male sterility * segmental trisomy * meiotic silencing of unsynapsed chromatin * DOWN - SYNDROME * MAMMALIAN MEIOSIS Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.318, year: 2014

  12. X chromosome dosage compensation via enhanced transcriptional elongation in Drosophila.

    Science.gov (United States)

    Larschan, Erica; Bishop, Eric P; Kharchenko, Peter V; Core, Leighton J; Lis, John T; Park, Peter J; Kuroda, Mitzi I

    2011-03-03

    The evolution of sex chromosomes has resulted in numerous species in which females inherit two X chromosomes but males have a single X, thus requiring dosage compensation. MSL (Male-specific lethal) complex increases transcription on the single X chromosome of Drosophila males to equalize expression of X-linked genes between the sexes. The biochemical mechanisms used for dosage compensation must function over a wide dynamic range of transcription levels and differential expression patterns. It has been proposed that the MSL complex regulates transcriptional elongation to control dosage compensation, a model subsequently supported by mapping of the MSL complex and MSL-dependent histone 4 lysine 16 acetylation to the bodies of X-linked genes in males, with a bias towards 3' ends. However, experimental analysis of MSL function at the mechanistic level has been challenging owing to the small magnitude of the chromosome-wide effect and the lack of an in vitro system for biochemical analysis. Here we use global run-on sequencing (GRO-seq) to examine the specific effect of the MSL complex on RNA Polymerase II (RNAP II) on a genome-wide level. Results indicate that the MSL complex enhances transcription by facilitating the progression of RNAP II across the bodies of active X-linked genes. Improving transcriptional output downstream of typical gene-specific controls may explain how dosage compensation can be imposed on the diverse set of genes along an entire chromosome.

  13. Dosage compensation and demasculinization of X chromosomes in Drosophila.

    Science.gov (United States)

    Bachtrog, Doris; Toda, Nicholas R T; Lockton, Steven

    2010-08-24

    The X chromosome of Drosophila shows a deficiency of genes with male-biased expression, whereas mammalian X chromosomes are enriched for spermatogenesis genes expressed premeiosis and multicopy testis genes. Meiotic X-inactivation and sexual antagonism can only partly account for these patterns. Here, we show that dosage compensation (DC) in Drosophila may contribute substantially to the depletion of male genes on the X. To equalize expression between X-linked and autosomal genes in the two sexes, male Drosophila hypertranscribe their single X, whereas female mammals silence one of their two X chromosomes. We combine fine-scale mapping data of dosage compensated regions with genome-wide expression profiles and show that most male-biased genes on the D. melanogaster X are located outside dosage compensated regions. Additionally, X-linked genes that have newly acquired male-biased expression in D. melanogaster are less likely to be dosage compensated, and parental X-linked genes that gave rise to an autosomal male-biased retrocopy are more likely located within compensated regions. This suggests that DC contributes to the observed demasculinization of X chromosomes in Drosophila, both by limiting the emergence of male-biased expression patterns of existing X genes, and by contributing to gene trafficking of male genes off the X. Copyright 2010 Elsevier Ltd. All rights reserved.

  14. Making Growth Work for Women in Low-income Countries (GrOW ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project is part of the Growth and Economic Opportunities for Women (GrOW) program. GrOW is a five-year, multi-funder partnership with the UK's Department for International Development (DFID), The William ... In addition to 10 projects addressing the barriers to women's economic ... Careers · Contact Us · Site map.

  15. Grænser forudsætter, at man vil bruge magt

    DEFF Research Database (Denmark)

    Østergaard, Uffe

    2016-01-01

    Historisk set. Fra Hadrians mur til de lyseblå gendarmer ved den dansk-tyske grænse: en historie om magt.......Historisk set. Fra Hadrians mur til de lyseblå gendarmer ved den dansk-tyske grænse: en historie om magt....

  16. Gröbner bases in control theory and signal processing

    CERN Document Server

    Regensburger, Georg

    2007-01-01

    This volume contains survey and original articles presenting the state of the art on the application of Gröbner bases in control theory and signal processing. The contributions are based on talks delivered at the Special Semester on Gröbner Bases and Related Methods at the Johann Radon Institute of Computational and Applied Mathematics (RICAM), Linz, Austria, in May 2006.

  17. Maths anxiety and medication dosage calculation errors: A scoping review.

    Science.gov (United States)

    Williams, Brett; Davis, Samantha

    2016-09-01

    A student's accuracy on drug calculation tests may be influenced by maths anxiety, which can impede one's ability to understand and complete mathematic problems. It is important for healthcare students to overcome this barrier when calculating drug dosages in order to avoid administering the incorrect dose to a patient when in the clinical setting. The aim of this study was to examine the effects of maths anxiety on healthcare students' ability to accurately calculate drug dosages by performing a scoping review of the existing literature. This review utilised a six-stage methodology using the following databases; CINAHL, Embase, Medline, Scopus, PsycINFO, Google Scholar, Trip database (http://www.tripdatabase.com/) and Grey Literature report (http://www.greylit.org/). After an initial title/abstract review of relevant papers, and then full text review of the remaining papers, six articles were selected for inclusion in this study. Of the six articles included, there were three experimental studies, two quantitative studies and one mixed method study. All studies addressed nursing students and the presence of maths anxiety. No relevant studies from other disciplines were identified in the existing literature. Three studies took place in the U.S, the remainder in Canada, Australia and United Kingdom. Upon analysis of these studies, four factors including maths anxiety were identified as having an influence on a student's drug dosage calculation abilities. Ultimately, the results from this review suggest more research is required in nursing and other relevant healthcare disciplines regarding the effects of maths anxiety on drug dosage calculations. This additional knowledge will be important to further inform development of strategies to decrease the potentially serious effects of errors in drug dosage calculation to patient safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Radio-chemical dosage of {sup 90}Sr in large volumes of drinking water; Dosage radiochimique du {sup 90}Sr sur des volumes importants d'eaux potables

    Energy Technology Data Exchange (ETDEWEB)

    Jeanmaire, L; Patti, F; Bullier, D [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    I. Principle of the method: 1. Fixing on a resin of all the cations present in the water. 2. Elution using 5 N nitric acid and precipitation of strontium as the carbonate. 3. Concentration of the strontium using the fuming nitric acid method. 4. Purification of the strontium on a resin by selective elution with ammonium citrate. 5. The strontium-90 is measured by separation at the {sup 90}Y equilibrium in the form of the oxalate which is then counted. II. Advantages of the method The concentration of the radio-activity starting from large volumes (100 l) is generally tedious but this method which makes use of a fixation on a cationic resin makes it very simple. The rest of the method consists of a series of simple chemical operations using ion-exchange on resins and coprecipitation. Finally, it is possible to dose stable strontium. (authors) [French] I. Principe du dosage 1. Fixation sur resine de tous les cations presents dans l'eau, 2. Elution par l'acide nitrique 5 N et precipitation du strontium sous forme de carbonate. 3. Concentration du strontium par la methode a l'acide nitrique fumant. 4. Purification du strontium sur resine par elution selective au citrate d'ammonium. 5. Le strontium-90 est dose par separation a l'equilibre du {sup 90}Y sous forme d'oxalate qui est compte. II. Interet de la methode La concentration de la radioactivite a partir de volumes importants (100 l) est generalement fastidieuse, la technique proposee rend cette phase tres simple en utilisant une fixation sur resine cationique. Le reste de la technique est une suite d'operations chimiques simples a realiser, faisant appel a l'echange d'ions sur resine et a la coprecipitation. Enfin, il est possible de realiser le dosage du strontium stable. (auteurs)

  19. Internal differential collision attacks on the reduced-round Grøstl-0 hash function

    DEFF Research Database (Denmark)

    Ideguchi, Kota; Tischhauser, Elmar Wolfgang; Preneel, Bart

    2014-01-01

    . This results in collision attacks and semi-free-start collision attacks on the Grøstl-0 hash function and compression function with reduced rounds. Specifically, we show collision attacks on the Grøstl-0-256 hash function reduced to 5 and 6 out of 10 rounds with time complexities 248 and 2112 and on the Grøstl......-0-512 hash function reduced to 6 out of 14 rounds with time complexity 2183. Furthermore, we demonstrate semi-free-start collision attacks on the Grøstl-0-256 compression function reduced to 8 rounds and the Grøstl-0-512 compression function reduced to 9 rounds. Finally, we show improved...

  20. On the Computation of Comprehensive Boolean Gröbner Bases

    Science.gov (United States)

    Inoue, Shutaro

    We show that a comprehensive Boolean Gröbner basis of an ideal I in a Boolean polynomial ring B (bar A,bar X) with main variables bar X and parameters bar A can be obtained by simply computing a usual Boolean Gröbner basis of I regarding both bar X and bar A as variables with a certain block term order such that bar X ≫ bar A. The result together with a fact that a finite Boolean ring is isomorphic to a direct product of the Galois field mathbb{GF}_2 enables us to compute a comprehensive Boolean Gröbner basis by only computing corresponding Gröbner bases in a polynomial ring over mathbb{GF}_2. Our implementation in a computer algebra system Risa/Asir shows that our method is extremely efficient comparing with existing computation algorithms of comprehensive Boolean Gröbner bases.

  1. Adolescentes e grávidas: onde buscam apoio?

    Directory of Open Access Journals (Sweden)

    Roselí Aparecida Godinho

    Full Text Available Adolescência é época de crise, mudança, readaptação ao novo corpo e de novas atitudes frente a vida. Se somarmos a isso o significado da gravidez, dos pontos de vista pessoal, social e familiar, compreenderemos como a gestação pode ser um evento difícil para a adolescente. O presente estudo teve como objetivo identificar onde as adolescentes grávidas buscam apoio. Evidenciou-se que as entrevistadas puderam contar com o apoio da família, principalmente dos pais e, com menos freqüência com o do pai do bebê, bem como a aceitação da gravidez, sua relação com o abandono escolar, a visão idealizada dessas garotas acerca da gestação e expectativas futuras, a preocupação com aspectos biológicos e a despreocupação com problemas concretos.

  2. GrEMBOSS: EMBOSS over the EELA GRID

    Energy Technology Data Exchange (ETDEWEB)

    Bonavides-Martinez, C.; Murrieta-Leon, E.; Verleyen, J.; Zayas-Lagunas, R.; Hernandez-Alvarez, A.; Rodriguez-Bahena, R.; Valverde, J. R.; Branger, P. A.; Sarachu, M.

    2007-07-01

    With the growth of genome databases and the implied complexity for processing such information within bioinformatics research, there is a need for computing power and massive storage facilities which can be provided by Grid infrastructures. EMBOSS is a free Open Source sequence analysis package specially developed for the needs of the bioinformatics and molecular biology user community. This work describes the deployment of EMBOSS over the EELA and EGEE Grids, both gLite middle ware-based infrastructures. This work is focused on rewriting the I/O EMBOSS libraries (AJAX) to use the GFAL from the LCG/EGEE middle ware. This library allows the use of files registered on the catalog service which are contained in the storage elements of a Grid. Submitting a job into a Grid is not an intuitive task. This work also describes an ad hoc mechanism to allow bioinformaticians to concentrate on the EMBOSS command, instead of acquiring advanced knowledge about Grid usage. The results obtained so far demonstrate the functionality of GrEMBOSS, and represent an efficient and viable alternative for gridifying other bioinformatics applications. (Author)

  3. GrEMBOSS: EMBOSS over the EELA GRID

    International Nuclear Information System (INIS)

    Bonavides-Martinez, C.; Murrieta-Leon, E.; Verleyen, J.; Zayas-Lagunas, R.; Hernandez-Alvarez, A.; Rodriguez-Bahena, R.; Valverde, J. R.; Branger, P. A.; Sarachu, M.

    2007-01-01

    With the growth of genome databases and the implied complexity for processing such information within bioinformatics research, there is a need for computing power and massive storage facilities which can be provided by Grid infrastructures. EMBOSS is a free Open Source sequence analysis package specially developed for the needs of the bioinformatics and molecular biology user community. This work describes the deployment of EMBOSS over the EELA and EGEE Grids, both gLite middle ware-based infrastructures. This work is focused on rewriting the I/O EMBOSS libraries (AJAX) to use the GFAL from the LCG/EGEE middle ware. This library allows the use of files registered on the catalog service which are contained in the storage elements of a Grid. Submitting a job into a Grid is not an intuitive task. This work also describes an ad hoc mechanism to allow bioinformaticians to concentrate on the EMBOSS command, instead of acquiring advanced knowledge about Grid usage. The results obtained so far demonstrate the functionality of GrEMBOSS, and represent an efficient and viable alternative for gridifying other bioinformatics applications. (Author)

  4. Análise comparativa das PE e PI máximas entre mulheres grávidas e não-grávidas e entre grávidas de diferentes períodos gestacionais

    Directory of Open Access Journals (Sweden)

    Leila Graziele Dias de Almeida

    2005-10-01

    Full Text Available O propósito deste estudo foi de verificar as possíveis diferenças entre as pressões inspiratórias e expiratórias máxima de mulheres grávidas e não-grávidas, bem como entre grávidas de períodos gestacionais diferentes. Para obtenção das informações propostas, foi utilizado o aparelho manuvacuômetro MVD 500, Mhmicrohard Global Med, como instrumento aferidor das pressões expiratória e inspiratória máxima de gestantes e não-gestantes compreendidas dentro de um mesmo grupo etário. O critério utilizado para seleção de informantes desta pesquisa foi estar grávida para um dos grupos e não estar grávida para o outro, sendo as mesmas escolhidas aleatoriamente através de indicações de informantes. A abordagem das informantes foi realizada em suas residências onde foram coletados dados de pressão inspiratória e expiratória máximas para posteriormente serem organizados, processados, categorizados e finalmente obter-se as médias encontradas nos grupos da amostra da pesquisa. As médias de pressão inspiratória e expiratória máximas obtidas nos grupos das gestantes foram as seguintes: PEmax.= 51,3cm H20; e Pimax= 48,3 cm H20; já as médias encontradas no grupo das não-gestantes foram: PEmax = 73 cm H2O, Pimax= 69,2cm H2O. As gestantes pertencentes ao subgrupo do primeiro ao quinto mês apresentaram uma média de PE= 56 cm H2O, e de PI= 60 cm H2O, enquanto que as gestantes do subgrupo a partir do sexto mês apresentaram as médias de PE e Pi= 56 cm H2O e 43,2 cm H2O respectivamente. Os resultados obtidos forneceram subsídios para inferir que existem diferenças entre as pressões inspiratória e expiratória máximas entre grávidas e não-grávidas, bem como em grávidas de período gestacionais diferentes

  5. Spectrophotometric method for estimation of amiloride in bulk and tablet dosage form

    Directory of Open Access Journals (Sweden)

    Aitha Vijaya Lakshmi

    2015-01-01

    Full Text Available Introduction: Amiloride chemically, 3,5-diamino-6-chloro-N-(diaminomethylene pyrazine-2-carboxamide. It is used in the management of congestive heart failure, available as Amifru tab, Amimide. It causes adverse effects like Nausea, diarrhea and dizziness. Materials: 0.1 N Hydrochloric acid, 0.1 N Sodium hydroxide and 1 mg/ml amiloride drug solution were required. Spectral and absorbance measurements were made using ELICO UV-160 double beam Spectrophotometer. Method: Amiloride drug solution concentration range of 25 to 125ug/ml in 0.1N HCl medium was scanned over the wave length range of 235-320 against blank prepared in 0.1N NaOH solution. Two wavelengths are selected one at positive peak 245 nm and another at negative peak 290 nm, the amplitude is calculated from these values. Results and Discussion: The sum of the absolute values at these wavelengths is called amplitude. The amplitude is proportional to the amount of drug. High accuracy, reproducibility and low t-values were reported from the calibration curve plotted with the amplitude verses amount of drug. So the proposed method is simple, less time consuming and it can be successfully adopted for the estimation of amiloride.

  6. A Pharmacokinetic Bioequivalence Study Comparing Pirfenidone Tablet and Capsule Dosage Forms in Healthy Adult Volunteers.

    Science.gov (United States)

    Pan, Lin; Belloni, Paula; Ding, Han Ting; Wang, Jianshuang; Rubino, Christopher M; Putnam, Wendy S

    2017-09-01

    Pirfenidone film-coated tablets were developed to offer an alternative to the marketed capsule formulation. This study assessed the bioequivalence of the tablet and capsule formulations under fed and fasted states. A Phase I, open-label, randomized, four-treatment-period, four-sequence, crossover pharmacokinetics study (NCT02525484) was conducted. Each subject received an 801-mg single dose of pirfenidone as three 267-mg capsules or one 801-mg tablet under fasted and fed conditions. Pirfenidone plasma C max , AUC 0-t and AUC 0-∞ were used to assess bioequivalence. Forty-four subjects were randomized to treatment. The 801-mg tablet in the fasted state met bioequivalence criteria [90% confidence intervals (CI) 80.00-125.00%] for the GLSM ratios of natural log-transformed C max , AUC 0-t and AUC 0-∞ . Under fed conditions, the 801-mg tablet met the bioequivalence criteria for AUC 0-t and AUC 0-∞ , but slightly exceeded the bioequivalence criteria for the C max (90% CI of 108.26-125.60%). The tablet C max was approximately 17% higher than that of the capsules. In the fed state, the tablet C max , and both AUC 0-t and AUC 0-∞ were reduced by 39% and 17%, respectively, relative to the fasted state. The tablet and capsules had acceptable tolerability profiles. The pirfenidone 801-mg tablet met bioequivalence criteria when compared with three 267-mg capsules in the fasted state. The tablet C max was slightly higher relative to capsules in the fed state, but this is not expected to have a clinically meaningful impact on the benefit-risk profile of pirfenidone. This work was supported by F. Hoffmann-La Roche Ltd.

  7. Radiolabeling of intact dosage forms by neutron activation: effects on in vitro performance

    International Nuclear Information System (INIS)

    Parr, A.; Jay, M.

    1987-01-01

    Compressed tablets containing various quantities of stable isotopes of Ba, Er, and Sm for use in neutron activation studies were evaluated for the effect of stable isotope incorporation on tablet hardness and disintegration times. At concentrations likely to be used in scintigraphic studies employing neutron activation as a radiolabeling method, no significant effect on in vitro parameters were observed. While the incorporation of stable isotopes influenced tablet hardness to a greater degree than disintegration time, irradiation of tablets in a neutron flux of 4.4 x 10(13) n/cm2 sec had a direct effect on tablet disintegration time. Thus, future neutron activation studies should focus on minimizing the amount of stable isotope to be incorporated with the formulation while using the shortest feasible irradiation time

  8. 75 FR 54492 - Ophthalmic and Topical Dosage Form New Animal Drugs; Gentamicin and Betamethasone Ophthalmic...

    Science.gov (United States)

    2010-09-08

    ... Ophthalmic Solution AGENCY: Food and Drug Administration, HHS. ACTION: Final rule; technical amendment... acetate ophthalmic solution. This action is being taken to comply with the Federal Food, Drug, and... GENTOCIN DURAFILM (gentamicin sulfate and betamethasone acetate) Ophthalmic Solution, sponsored by Intervet...

  9. In-vitro Characterization of Optimized Multi-Unit Dosage Forms of ...

    African Journals Online (AJOL)

    The optimized formulation was characterized with Differential Scanning Calorimetry and Fourier-Transform Infrared Spectroscopy. Results showed that the optimized MU tablets gave dissolution profile that was comparable with that of the designed model. The following were the dissolution parameters of the optimized MU ...

  10. In vitro models for the prediction of in vivo performance of oral dosage forms

    DEFF Research Database (Denmark)

    Kostewicz, Edmund S; Abrahamsson, Bertil; Brewster, Marcus

    2014-01-01

    Accurate prediction of the in vivo biopharmaceutical performance of oral drug formulations is critical to efficient drug development. Traditionally, in vitro evaluation of oral drug formulations has focused on disintegration and dissolution testing for quality control (QC) purposes. The connection...... of formulations that rely on complex intraluminal processes (e.g. solubilization, supersaturation, precipitation…) remains extremely challenging. Concomitantly, the increasing demand for complex formulations to overcome low drug solubility or to control drug release rates urges the development of new in vitro...

  11. Patients' evaluation of shape, size and colour of solid dosage forms

    DEFF Research Database (Denmark)

    Overgaard, A.B.A.; Møller-Sonnergaard, J.; Christrup, L.L.

    2001-01-01

    Aim: The aim of the study was to investigate the swallow ability and the patient preferences of tablets and capsules with different sizes, shapes, surfaces and colours. Method: Patients were asked to swallow tablets with different surface and size, while tablets with different shape and colour were...... visually assessed. They were asked to indicate their preferences. Results: Gelatine capsules were found easier to swallow than tablets and coated tablets were found easier than uncoated normal tablets. The preferred colour was white both for tables and capsules, and the most disliked colours were purple...... tablets and brown capsules. The preferred shape was strongly arched circular for small tablets, oval for medium sized and big tablets. The difficulty to swallow tablets increased with increasing size. Conclusion: According to the results of this study, the ideal tablet is small and white, strongly arched...

  12. In vitro models for the prediction of in vivo performance of oral dosage forms

    NARCIS (Netherlands)

    Kostewicz, E.S.; Abrahamsson, B.; Brewster, M.; Brouwers, J.; Butler, J.; Carlert, S.; Dickinson, P.A.; Dressman, J.; Holm, R.; Klein, S.; Mann, J.; McAllister, M.; Minekus, M.; Muenster, U.; Müllertz, A.; Verwei, M.; Vertzoni, M.; Weitschies, W.; Augustijns, P.

    2014-01-01

    Accurate prediction of the in vivo biopharmaceutical performance of oral drug formulations is critical to efficient drug development. Traditionally, in vitro evaluation of oral drug formulations has focused on disintegration and dissolution testing for quality control (QC) purposes. The connection

  13. 75 FR 1274 - Implantation or Injectable Dosage Form New Animal Drugs; Florfenicol and Flunixin

    Science.gov (United States)

    2010-01-11

    ... flunixin meglumine), a combination injectable solution, for treatment of bovine respiratory disease (BRD... treatment of bovine respiratory disease (BRD) associated with Mannheimia haemolytica, Pasteurella multocida... female dairy cattle 20 months of age or older. Use of florfenicol in this class of cattle may cause milk...

  14. Adsorptive Cathodic Stripping Voltammetric Determination of Cefoperazone in Bulk Powder, Pharmaceutical Dosage Forms, and Human Urine

    Directory of Open Access Journals (Sweden)

    Vu Dang Hoang

    2013-01-01

    Full Text Available The electroreduction behaviour and determination of cefoperazone using a hanging mercury drop electrode were investigated. Cyclic voltammograms of cefoperazone recorded in universal Britton-Robinson buffers pH 3–6 exhibited a single irreversible cathodic peak. The process was adsorption-controlled. Britton-Robinson buffer 0.04 M pH 4.0 was selected as a supporting electrolyte for quantitative purposes by differential pulse and square wave adsorptive cathodic stripping voltammetry. The experimental voltammetric conditions were optimized using Central Composite Face design. A reduction wave was seen in the range from −0.7 to −0.8 V. These voltammetric techniques were successfully validated as per ICH guidelines and applied for the determination of cefoperazone in its single and sulbactam containing powders for injection and statistically comparable to USP-HPLC. They were further extended to determine cefoperazone in spiked human urine with no matrix effect.

  15. [Trade-offs in the development of various dosage form (overview)].

    Science.gov (United States)

    Uchida, Takahiro

    2015-01-01

    In this symposium we focused on trade-offs which might occur in the process of development of many types of formulation and corresponding dissolution methods. Firstly, we focused on a solubility-permeability trade-off in the case of micelle with surfactant or molecular complex with CyD. The micelle would be successful in increasing drug solubility, however it rather decreased permeability of model drug progesterone (Biopharmaceutics Classfication System (BCS) Class II) as an overall flux. Secondly in order to reduce bitterness of branched chain amino acid (BCAA), increasing particle sizes of each amino acid crystals involved in formulation was effective since the release rate of amino acid was restricted efficiently. Thirdly, in the case of injection of paclitaxel (BCS Class II)formulation, the drug was adsorbed to albumin. Thereby the risk of allergy was dramatically decreased compared to the case when non-ionic surfactant was used as an additive. Fourth, anticancer drug was incorporated into the internal (core) phase of an orally disintegrating tablet (ODT), this is also merit to avoid exposure of the drug to a nursing person or individual working person in manufacturing process. Fifth, the convenient syringe type kit pharmaceutical preparation for administration of total parenteral nutrition (TPN) to avoid incompatibility and its risk management effect was briefly discussed. Finally, the risk of an additive such as alcohol for a preterm infant was described.

  16. Validated UV-Spectrophotometric Methods for Determination of Gemifloxacin Mesylate in Pharmaceutical Tablet Dosage Forms

    Directory of Open Access Journals (Sweden)

    R. Rote Ambadas

    2010-01-01

    Full Text Available Two simple, economic and accurate UV spectrophotometric methods have been developed for determination of gemifloxacin mesylate in pharmaceutical tablet formulation. The first UV-spectrophotometric method depends upon the measurement of absorption at the wavelength 263.8 nm. In second area under curve method the wavelength range for detection was selected from 268.5-258.5 nm. Beer’s law was obeyed in the range of 2 to 12 μgmL-1 for both the methods. The proposed methods was validated statistically and applied successfully to determination of gemifloxacin mesylate in pharmaceutical formulation.

  17. 76 FR 49649 - Oral Dosage Form New Animal Drugs; Change of Sponsor; Chlortetracycline; Sulfamethazine

    Science.gov (United States)

    2011-08-11

    ... of Pfizer, Inc., to Boehringer Ingelheim Vetmedica, Inc. DATES: This rule is effective August 11...-018, 055-039, 065-071, and 065-440) to Boehringer Ingelheim Vetmedica, Inc., 2621 North Belt Highway...

  18. Evaluation of the impact of sodium lauryl sulfate source variability on solid oral dosage form development.

    Science.gov (United States)

    Qiang, Dongmei; Gunn, Jocelyn A; Schultz, Leon; Li, Z Jane

    2010-12-01

    The objective of this study was to investigate the effects of sodium lauryl sulfate (SLS) from different sources on solubilization/wetting, granulation process, and tablet dissolution of BILR 355 and the potential causes. The particle size distribution, morphology, and thermal behaviors of two pharmaceutical grades of SLS from Spectrum and Cognis were characterized. The surface tension and drug solubility in SLS solutions were measured. The BILR 355 tablets were prepared by a wet granulation process and the dissolution was evaluated. The critical micelle concentration was lower for Spectrum SLS, which resulted in a higher BILR 355 solubility. During wet granulation, less water was required to reach the same end point using Spectrum than Cognis SLS. In general, BILR 355 tablets prepared with Spectrum SLS showed a higher dissolution than the tablets containing Cognis SLS. Micronization of SLS achieved the same improved tablet dissolution as micronized active pharmaceutical ingredient. The observed differences in wetting and solubilization were likely due to the different impurity levels in SLS from two sources. This study demonstrated that SLS from different sources could have significant impact on wet granulation process and dissolution. Therefore, it is critical to evaluate SLS properties from different suppliers, and then identify optimal formulation and process parameters to ensure robustness of drug product manufacture process and performance.

  19. [Results of radioiodine therapy in different forms of hyperthyroidism in relation to the planned dosage].

    Science.gov (United States)

    Moser, E

    1992-07-01

    The aim of this study was to assess the efficacy of radioiodine therapy (131J) in a large group (n = 925) of hyperthyroid patients treated at two major departments of nuclear medicine (Freiburg, abbr. FR, and Munich, abbr. M). 761 patients suffered from non-immunogenic hyperthyroidism (Plummer's disease) and the remaining 164 patients from immunogenic hyperthyroidism (Graves' disease). In these cases, radioiodine therapy using doses between 60 and 80 Gy proved ineffective, FR (80 Gy) recording 28% success and M (60 Gy) 54%. A dose of 150 Gy, however, is successful in more than 80% of the cases: FR 81%, M86%. However, the incidence rate of hypothyroidism increases consecutively with 150 Gy: FR 49%, M 62%. In patients suffering from Plummer's disease, the solitary autonomous nodule can be eliminated by radioiodine therapy (400 Gy) with a high rate of success (95%); the same applies to multinodular autonomous adenomas. The therapeutic concept applying a dose of 400 Gy to the total functional autonomous tissue (delineated by ultrasound) yields slightly better results (95%) than 150 Gy applied to thyroid gland (M88%, FR82%). This dosimetric compromise is a practicable alternative which is tolerably successful. In patients suffering from disseminated non-immunogenic hyperthyroidism, a dose of 150 Gy applied to the entire organ succeeds in 85% of the cases. The rate of hypothyroidism resulting from these dose recommendations is the lesser evil compared to residual or recurrent hyperthyroidism, since hypothyroid patients can be treated without any problem with thyroid hormones.

  20. Optimization of RPLC Conditions for Quantitative Analysis of Atorvastatin and Rosuvastatin in Pharmaceutical Dosage Form

    Directory of Open Access Journals (Sweden)

    Zehra ÜSTÜN

    2016-05-01

    Özet: Bu çalışmada, atorvastatin (ATV ve rosuvastatinin (RSV eş zamanlı tayini için ters faz sıvı kromatografi (RPLC metodu geliştirilmiş ve valide edilmiştir. Ayırmada X Terra C18 (250 mm x 4,6 mm, 5µm kolon kullanılmış ve 244 nm’ de yürütülen çalışmada akış hızı 1 mL dakika-1 olarak belirlenmiştir. Tanımlanan metodun doğrusal aralığı ATV için 3-13 µg mL-1, RSV için 4-14 µg mL-1olarak belirlenmiştir. Deneyde iç standart (IS olarak Losartan kullanılmıştır. ATV ve RSV için dedeksiyon limiti (LOD değerleri sırasıyla 0,133 ve 0,221 µg mL-1 olarak hesaplanmıştır. Kantitasyon limiti (LOQ değerleri ise ATV ve RSV için sırasıyla 0,473 ve 0,970 µg mL-1 olarak tayin edilmiştir. Elde edilen sonuçlara bakılarak, önerilen RPLC metodu ATV, RSV ve bunların farmasötik dozaj formlarının rutin analizlerinde kullanılabilir olduğu gözlemlenmiştir. Anahtar Kelimeler: Metot optimizasyonu, validasyon, eş zamanlı tayin, atorvastatin, rosuvastatin

  1. Validated HPTLC methods for determination of some selected antihypertensive mixtures in their combined dosage forms

    Directory of Open Access Journals (Sweden)

    Rasha A. Shaalan

    2014-12-01

    Full Text Available Simple and selective HPTLC methods were developed for the simultaneous determination of the antihypertensive drugs; carvedilol and hydrochlorothiazide in their binary mixture (Mixture I and amlodipine besylate, valsartan, and hydrochlorothiazide in their combined ternary formulation (Mixture II. Effective chromatographic separation was achieved on Fluka TLC plates 20 × 20 cm aluminum cards, 0.2 mm thickness through linear ascending development. For Mixture I, the mobile phase composed of chloroform–methanol in the ratio 8:2 v/v. Detection was performed at 254 nm for both carvedilol and hydrochlorothiazide. For Mixture II, the mobile phase was chloroform–methanol–ammonia in the volume ratio 8:2:0.1. Detection was performed at 254 nm for valsartan and hydrochlorothiazide, and at 365 nm for amlodipine. Quantification was based on spectrodensitometric analysis. Analytical performance of the proposed HPTLC procedures was statistically validated with respect to linearity, ranges, precision, accuracy, specificity, robustness, detection and quantification limits. The linearity ranges were 0.05–1.0 and 0.1–2.0 μg/spot for carvedilol and hydrochlorothiazide, respectively in Mixture I, 0.1–2.0, 0.1–2.0 and 0.2–4.0 μg/spot for amlodipine, hydrochlorothiazide and valsartan, respectively in Mixture II, with correlation coefficients >0.9992. The validated HPTLC methods were applied to the analysis of the cited antihypertensive drugs in their combined pharmaceutical tablets. The proposed methods confirmed peak identity and purity.

  2. 77 FR 4225 - Oral Dosage Form New Animal Drugs; Milbemycin Oxime, Lufenuron, and Praziquantel

    Science.gov (United States)

    2012-01-27

    ... caninum), adult whipworm (Trichuris vulpis), and adult tapeworm (Taenia pisiformis, Echinococcus multilocularis, and E. granulosus) infections in dogs and puppies 2 pounds of body weight or greater and 6 weeks...

  3. 75 FR 71016 - Intramammary Dosage Form New Animal Drugs; Cloxacillin Benzathine

    Science.gov (United States)

    2010-11-22

    ... this chapter for use in dairy cows. (1) Amount. Administer aseptically into each quarter immediately after last milking. (2) Indications for use. For the treatment of mastitis caused by Staphylococcus aureus and Streptococcus agalactiae including penicillin resistant strains in dairy cows during the dry...

  4. Stability Indicating RP-HPLC Method for Simultaneous Determination of Aspirin and Clopidrogel in Dosage Form

    International Nuclear Information System (INIS)

    Mohd Gousuddin; Sengupta, P.; Tripathi, V.D.; Das, A.

    2016-01-01

    Stability-indicating High Performance Liquid Chromatographic (HPLC) method was developed for simultaneous Aspirin and Clopidogrel, A Phenomenex Gemini C-18, 5 μm column having 250 mm x 4.6 mm i.d. in isocratic mode, with mobile phase containing buffer solution 0.3 % orthophosphoric acid : acetonitrile (65:35, v/v). The flow rate was 1 ml/ min and effluents were monitored at 266 nm. For linearity seven points calibration curve were obtained in a concentration range from 0.030-0.120 mg/ ml for aspirin and 0.015-0.060 mg/ ml for clopidogrel with correlation coefficient 0.9999. In the present study stability indicating HPLC method for the combination was tested by degrading the drugs together under various stress conditions like acid hydrolysis, base hydrolysis, oxidation, thermal and photolytic stress which is recommended by ICH guideline. (author)

  5. Spectrophotometric Determination of Metoprolol Tartrate in Pharmaceutical Dosage Forms on Complex Formation with Cu(II

    Directory of Open Access Journals (Sweden)

    Mustafa Cesme

    2011-06-01

    Full Text Available A new, simple, sensitive and accurate spectrophotometric method has been developed for the assay of metoprolol tartrate (MPT, which is based on the complexation of drug with copper(II [Cu(II] at pH 6.0, using Britton-Robinson buffer solution, to produce a blue adduct. The latter has a maximum absorbance at 675 nm and obeys Beer’s law within the concentration range 8.5-70 mg/mL. Regression analysis of the calibration data showed a good correlation coefficient (r = 0.998 with a limit of detection of 5.56 mg/mL. The proposed procedure has been successfully applied to the determination of this drug in its tablets. In addition, the spectral data and stability constant for the binuclear copper(II complex of MPT (Cu2MPT2Cl2 have been reported.

  6. A novel microdialysis-dissolution/permeation system for testing oral dosage forms

    DEFF Research Database (Denmark)

    Fong, Sophia Yui Kau; Poulsen, Jessie; Brandl, Martin

    2016-01-01

    A novel microdialysis-dissolution/permeation (M-D/P) system was developed for the biopharmaceutical assessment of oral drug formulations. This system consists of a side-by-side diffusion chamber, a microdialysis unit fixed within the dissolution chamber for continuous sampling, and a biomimetic P...

  7. In-vitro Characterization of Optimized Multi-Unit Dosage Forms of ...

    African Journals Online (AJOL)

    Michael Horsfall

    of sustained release tablet formulations in the market with a designed model. The fast release ... but release the drug in a way that the pharmaceutical scientists and engineers .... the stress needed to fracture a tablet by diametral compression.

  8. Simultaneous determination of rabeprazole sodium and itopride hydrochloride in capsule dosage form by spectrophotometry.

    Science.gov (United States)

    Sabnis, Shweta S; Gandhi, Santosh V; Madgulkar, A R; Bothara, K G

    Three methods viz. Absorbance Ratio Method (I), Dual Wavelength Method (II) and First Order Derivative Spectroscopic Method (III) for simultaneous estimation of Rabeprazole sodium and Itopride hydrochloride have been developed. The drugs obey Beer's law in the concentration range 2-20 microg/ml for RAB and 5-75 microg/ml for ITO. The results of analysis of drugs have been validated statistically and by recovery studies.

  9. Simultaneous HPTLC Determination of Rabeprazole and Itopride Hydrochloride From Their Combined Dosage Form

    OpenAIRE

    Suganthi, A.; John, Sofiya; Ravi, T. K.

    2008-01-01

    A simple, precise, sensitive, rapid and reproducible HPTLC method for the simultaneous estimation of the rabeprazole and itopride hydrochloride in tablets was developed and validated. This method involves separation of the components by TLC on precoated silica gel G60F254 plate with solvent system of n-butanol, toluene and ammonia (8.5:0.5:1 v/v/v) and detection was carried out densitometrically using a UV detector at 288 nm in absorbance mode. This system was found to give compact spots for ...

  10. Artificial Neural Networks in Evaluation and Optimization of Modified Release Solid Dosage Forms

    OpenAIRE

    Zorica Djurić; Jelena Parojčić; Svetlana Ibrić; Jelena Djuriš

    2012-01-01

    Implementation of the Quality by Design (QbD) approach in pharmaceutical development has compelled researchers in the pharmaceutical industry to employ Design of Experiments (DoE) as a statistical tool, in product development. Among all DoE techniques, response surface methodology (RSM) is the one most frequently used. Progress of computer science has had an impact on pharmaceutical development as well. Simultaneous with the implementation of statistical methods, machine learning tools took a...

  11. A new insight about pharmaceutical dosage forms for benzathine penicillin G

    Directory of Open Access Journals (Sweden)

    K. G. Holanda e Silva

    2009-01-01

    Full Text Available

    In this work, a micellar system of benzathine penicillin G (BPG in sodium deoxycholate (NaDC was developed and evaluated physicochemically. The solubility profile of the drug in water and buffer solutions at various pH was determined, as well as its n-octanol/water partition coefficient. The Critical Micellar Concentration of NaDC and its ability to incorporate BPG were also assessed. The study was carried out at low and high ionic strength which was adjusted by the addition of sodium chloride. The results demonstrated the ability of the micellar system to incorporate BPG, as well as to increase its apparent solubility in water. The enhancement of the solubility of BPG by the presence of NaDC micelles could be analyzed quantitatively within the framework of the pseudo-phase model. Concentration analysis showed that the micellar system could attain up to 90% incorporation of BPG. The incorporated drug is expected to exhibit improved stability, since the antibiotic enclosed in the hydrophobic core of micelles is rather shielded from the aqueous external environment. Keywords: Benzathine Penicillin G; micellar solubilization; micelles; pre-formulation; sodium deoxycholate.

  12. Mechanistic study of the azithromycin dosage-form-dependent food effect.

    Science.gov (United States)

    Curatolo, William; Foulds, George; Labadie, Robert

    2010-07-01

    Azithromycin capsules are known to exhibit a negative food effect, manifest as a decrease in azithromycin bioavailability in the fed state. Azithromycin tablets are known to be bioequivalent to capsules in the fasted state, but do not exhibit a food effect. In the present study, the involvement of gastric degradation of azithromycin to des-cladinose azithromycin (DCA) has been investigated as a possible mechanism for the observed capsule food effect. Healthy volunteers were dosed with azithromycin tablets and capsules, fasted and fed, in a four-way randomized crossover study. Serum levels of DCA were measured as a function of time post-dose. Natural log-transformed PK parameters were statistically analyzed using an ANOVA model appropriate for the study design. When capsules were dosed to fed subjects, the systemic AUC for DCA was 243% of the value observed after fasted-state dosing, and the DCA C(max) was 270% of the value observed after fasted-state dosing. When azithromycin tablets were dosed in the fasted and fed states, there was no significant difference in systemic DCA. Gastric degradation of azithromycin to DCA is the likely mechanism for the observed negative food effect observed for azithromycin capsules. This effect is not observed for tablets. These observations suggest that azithromycin capsules exhibit slow and/or delayed disintegration in the fed stomach, resulting in extended gastric residence and degradation of a portion of the gastrically retained azithromycin.

  13. Spectrophotometric determination of phenylpropanolamine in dosage forms using dimethylaminobenzaldehyde as a derivatizing reagent

    International Nuclear Information System (INIS)

    Rind, F.M.A.; Khushawar, M.Y.

    2000-01-01

    Phenylpropanolamine (PPA) was extracted from slightly alkaline medium in chloroform, derivatized with dimethylaminobenzaldehyde (DAB) and determined by spectrophotometry at 377 nm. Beer's law was obeyed for 4.5-13.5 mu g. After the extraction of PPA in organic phase, paracetamole remaining in the aqueous phase could also be determined by spectrophotometry at 291 nm. The method was applied for the determination of PPA and paracetamole in the pharmaceutical preparations. Tavagyl-D, sinulab and Panadol labels with RSD within 0.4-0.8%. (author)

  14. New oral dosage form for elderly patients. II. Release behavior of benfotiamine from silk fibroin gel.

    Science.gov (United States)

    Hanawa, T; Watanabe, A; Tsuchiya, T; Ikoma, R; Hidaka, M; Sugihara, M

    1995-05-01

    Silk fibroin gel (SFG) containing benfotiamine (BTMP) was prepared. The release behavior of BTMP from SFG was studied as a function of silk fibroin (SF) content and glycerol content, and the influence of the existence of beta-cyclodextrin (beta-CD) on the physicochemical properties of SFG were investigated. The release rate of BTMP from SFG was retarded by an increase in SF concentration. The addition of beta-CD affected both the release properties and rheological properties of the SFG. It was found from the results of the "paddle-bead method" that the release profiles of BTMP from SFG were inversely proportional to the SFG firmness.

  15. Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

    OpenAIRE

    Römer, Meike

    2008-01-01

    In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical...

  16. UV Spectrophotometric Method for Determination of Cinitapride in Pure and its Solid Dosage Form

    Directory of Open Access Journals (Sweden)

    B. Thangabalan

    2009-01-01

    Full Text Available A new, rapid, precise, accurate and sensitive analytical method was developed for the UV spectrophotometric assay of cinitapride (CTP. The drug obeyed the Beer's law and showed good correlation. It showed absorption maxima at 260 nm in methanol. The linearity was observed between 5-40 µg mL-1. The results of analysis were validated by recovery studies. The recovery was more than 99%. The proposed method is the only method available for spectrophotometric determination of the drug. It is simple, precise, sensitive and reproducible and can be used for the routine quality control testing of the marketed formulations.

  17. Application of infrared spectrophotometry to the identification of inorganic substances in dosage forms of Antacida group.

    Science.gov (United States)

    Umbreit, M H; Jedrasiewicz, A

    2000-01-01

    Powdered tablets from the Antacida group: Alusal, Milk of Magnesia, Alumag, Maalox, Magnosil, Alugastrin, Malugastrin, Rennie, and components deciding about their antiacidity like Al(OH)3, Mg(OH)2, Mg2Si3O8, NaAl(OH)2CO3, MgAl(OH)(SO4)2, CaCO3, MgCO3, were subjected to infrared spectrophotometric investigations. It was found that infrared spectra of each pharmaceutical compound are different and show a series of characteristic maxima, by which they can be identified with in the spectral range of 4000 cm-1-200 cm-1. Comparison of infrared spectra of finished products with spectra of their components it was showed that the application of infrared spectrophotometry methods enabled us to prove the presence of particular compounds used in formulations. Tablet mass and odorizing agents do not cause significant changes in spectra of the tablets studied, preparations from the Antacida group.

  18. 76 FR 72619 - Ophthalmic and Topical Dosage Form New Animal Drugs; Eprinomectin

    Science.gov (United States)

    2011-11-25

    ... (eprinomectin) Pour-On for Beef and Dairy Cattle, a topical solution used for the treatment and control of internal and external parasites of cattle on pasture with persistent effectiveness. The supplemental NADA...

  19. Analytical method development and Validation of Aml odipine Besylate and Nebivolol in their Dosage Form

    OpenAIRE

    Patel Jignesh; Patel Mandev

    2014-01-01

    This work is concerned with application of simple, economical, precise, accurate and reproducible reverse phase high performance liquid chromatographic (RP-HPLC) method for simultaneous estimation of Nebivolol hydrochloride(NBH) and S-Amlodipine besylate (AMB) on thermo Hypersil C18 (Thermo Electron Corporation) (250 x 4.6 mm, 5 μm) using Acetonitrile and Phosphate buffer (pH 2.5 ± 0.1) in ratio of 60:40 as mobile phase. pH of buffer adjusted to 2.5 ± 0.1 with O-phosphoric acid. The flow rate...

  20. High-pressure liquid chromatographic analysis of pramoxine hydrochloride in high lipoid aerosol foam dosage form.

    Science.gov (United States)

    Weinberger, R; Mann, B; Posluszny, J

    1980-04-01

    A rapid and quantitative method for the determination of pramoxine hydrochloride by high-pressure liquid chromatography is presented. The drug is extracted as the salt from a preparation with a high lipoid composition by partitioning it to the aqueous phase of an ether-methanol-water-acetic acid system. The extract is chromatographed on an octadecylsilane bonded packing with a methanol-water-acetic acid-methanesulfonic acid mobile phase. The time required for each separation is approximately 6 min. Analytical recoveries of 100.4 +/- 1.5% were obtained.

  1. 77 FR 4227 - Implantation or Injectable Dosage Form New Animal Drugs; Gonadotropin Releasing Factor Analog...

    Science.gov (United States)

    2012-01-27

    ... Factor Analog-Diphtheria Toxoid Conjugate AGENCY: Food and Drug Administration, HHS. ACTION: Final rule... extends the slaughter interval for intact male swine injected with gonadotropin releasing factor analog...-322 for IMPROVEST (gonadotropin releasing factor analog-diphtheria toxoid conjugate) Sterile Solution...

  2. 76 FR 27888 - Implantation or Injectable Dosage Form New Animal Drugs; Gonadotropin Releasing Factor-Diphtheria...

    Science.gov (United States)

    2011-05-13

    ... Factor-Diphtheria Toxoid Conjugate AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. [[Page... veterinary prescription use of gonadotropin releasing factor-diphtheria toxoid conjugate by subcutaneous... provides for the veterinary prescription use of IMPROVEST (gonadotropin releasing factor-diphtheria toxoid...

  3. 75 FR 76260 - Implantation or Injectable Dosage Form New Animal Drugs; Flunixin

    Science.gov (United States)

    2010-12-08

    ... acute bovine mastitis. DATES: This rule is effective December 8, 2010. FOR FURTHER INFORMATION CONTACT... cows for control of pyrexia associated with acute bovine mastitis. The supplemental application is... of pyrexia associated with acute bovine mastitis. (ii) Limitations. Cattle must not be slaughtered...

  4. 75 FR 9333 - Implantation or Injectable Dosage Form New Animal Drugs; Tilmicosin

    Science.gov (United States)

    2010-03-02

    ... (NADA) filed by Elanco Animal Health, A Division of Eli Lilly & Co. The supplemental NADA provides a...: [email protected] . SUPPLEMENTARY INFORMATION: Elanco Animal Health, A Division of Eli Lilly & Co., Lilly Corporate Center, Indianapolis, IN 46285, filed a supplement to NADA 140-929 for MICOTIL...

  5. Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques

    DEFF Research Database (Denmark)

    Genina, Natalja; Fors, Daniela; Vakili, Hossein

    2012-01-01

    substrates: A (uncoated woodfree paper), B (triple-coated inkjet paper) and C (double-coated sheet fed offset paper) were used as porous model carriers for drug delivery. Active pharmaceutical ingredient (API) containing solutions were printed onto 1 cm × 1 cm substrate areas using an inkjet printer...

  6. Biowaiver monographs for immediate release solid oral dosage forms: acetaminophen (paracetamol).

    NARCIS (Netherlands)

    Kalantzi, L; Reppas, C; Dressman, J B; Amidon, G L; Junginger, H E; Midha, K K; Shah, V P; Stavchansky, S A; Barends, Dirk M

    2006-01-01

    Literature data are reviewed on the properties of acetaminophen (paracetamol) related to the biopharmaceutics classification system (BCS). According to the current BCS criteria, acetaminophen is BCS Class III compound. Differences in composition seldom, if ever, have an effect on the extent of

  7. Application of Ring Shear Testing to Optimize Pharmaceutical Formulation and Process Development of Solid Dosage Forms

    DEFF Research Database (Denmark)

    Søgaard, Søren Vinter; Pedersen, Troels; Allesø, Morten

    This study investigates how shear and wall friction tests performed at small stresses can be applied to predict critical flow properties of powders, such as flow patterns and arching tendencies, in pharmaceutical manufacturing operations. The study showed that this approach is a promising method...

  8. Improved protocol and data analysis for accelerated shelf-life estimation of solid dosage forms.

    Science.gov (United States)

    Waterman, Kenneth C; Carella, Anthony J; Gumkowski, Michael J; Lukulay, Patrick; MacDonald, Bruce C; Roy, Michael C; Shamblin, Sheri L

    2007-04-01

    To propose and test a new accelerated aging protocol for solid-state, small molecule pharmaceuticals which provides faster predictions for drug substance and drug product shelf-life. The concept of an isoconversion paradigm, where times in different temperature and humidity-controlled stability chambers are set to provide a critical degradant level, is introduced for solid-state pharmaceuticals. Reliable estimates for temperature and relative humidity effects are handled using a humidity-corrected Arrhenius equation, where temperature and relative humidity are assumed to be orthogonal. Imprecision is incorporated into a Monte-Carlo simulation to propagate the variations inherent in the experiment. In early development phases, greater imprecision in predictions is tolerated to allow faster screening with reduced sampling. Early development data are then used to design appropriate test conditions for more reliable later stability estimations. Examples are reported showing that predicted shelf-life values for lower temperatures and different relative humidities are consistent with the measured shelf-life values at those conditions. The new protocols and analyses provide accurate and precise shelf-life estimations in a reduced time from current state of the art.

  9. 76 FR 78150 - Ophthalmic and Topical Dosage Form New Animal Drugs; Hydrocortisone Aceponate, Miconazole Nitrate...

    Science.gov (United States)

    2011-12-16

    ... provides for the veterinary prescription use of a hydrocortisone aceponate, miconazole nitrate, and... December 16, 2011. FOR FURTHER INFORMATION CONTACT: Lisa M. Troutman, Center for Veterinary Medicine (HFV..., TX 76137, filed NADA 141-330 for the veterinary prescription use of EASOTIC (hydrocortisone aceponate...

  10. 77 FR 3598 - Ophthalmic and Topical Dosage Form New Animal Drugs; Gentamicin and Betamethasone Spray

    Science.gov (United States)

    2012-01-25

    ... veterinary prescription use of gentamicin sulfate and betamethasone valerate topical spray in dogs. DATES... Veterinary Medicine (HFV-170), Food and Drug Administration, 7500 Standish Pl., Rockville, MD 20855, (240... prescription use of Gentamicin Topical Spray (gentamicin sulfate and betamethasone valerate) in dogs. Sparhawk...

  11. 75 FR 26646 - Oral Dosage Form New Animal Drugs; Orbifloxacin Suspension

    Science.gov (United States)

    2010-05-12

    .... The NADA provides for the veterinary prescription use of an oral suspension containing orbifloxacin... 12, 2010. FOR FURTHER INFORMATION CONTACT: Melanie R. Berson, Center for Veterinary Medicine (HFV-110..., filed NADA 141-305 that provides for veterinary prescription use of ORBAX (orbifloxacin) Oral Suspension...

  12. 75 FR 4692 - Implantation or Injectable Dosage Form New Animal Drugs; Ceftiofur Crystalline Free Acid

    Science.gov (United States)

    2010-01-29

    ... NADA provides for veterinarian prescription use of ceftiofur crystalline free acid injectable... January 29, 2010. FOR FURTHER INFORMATION CONTACT: Melanie R. Berson, Center for Veterinary Medicine (HFV... crystalline free acid) Sterile Suspension. The supplemental NADA provides for veterinarian prescription use of...

  13. 75 FR 38699 - Implantation or Injectable Dosage Form New Animal Drugs; Propofol

    Science.gov (United States)

    2010-07-06

    ... Fort Dodge Animal Health, Division of Wyeth. The NADA provides for veterinary prescription use of... INFORMATION CONTACT: Melanie R. Berson, Center for Veterinary Medicine (HFV-110), Food and Drug Administration... 42d St., New York, NY 10017 filed NADA 141-303 that provides for veterinary prescription use of...

  14. 75 FR 1274 - Implantation or Injectable Dosage Form New Animal Drugs; Hyaluronate Sodium

    Science.gov (United States)

    2010-01-11

    ... January 11, 2010. FOR FURTHER INFORMATION CONTACT: Melanie R. Berson, Center for Veterinary Medicine (HFV..., Woburn, MA 01801, filed a supplement to NADA 122-578 that provides for the veterinary prescription use of... redelegated to the Center for Veterinary Medicine, 21 CFR part 522 is amended as follows: PART 522...

  15. 75 FR 59610 - Implantation and Injectable Dosage Form New Animal Drugs; Firocoxib

    Science.gov (United States)

    2010-09-28

    ...) filed by Merial Ltd. The NADA provides for the veterinary prescription use of firocoxib injectable... Veterinary Medicine (HFV-110), Food and Drug Administration, 7500 Standish Pl., Rockville, MD 20855, 240-276...., Bldg. 500, Duluth, GA 30096-4640 filed NADA 141-313 that provides for veterinary prescription use of...

  16. Derivative spectrophotometric method for simultaneous determination of zofenopril and fluvastatin in mixtures and pharmaceutical dosage forms.

    Science.gov (United States)

    Stolarczyk, Mariusz; Maślanka, Anna; Apola, Anna; Rybak, Wojciech; Krzek, Jan

    2015-09-05

    Fast, accurate and precise method for the determination of zofenopril and fluvastatin was developed using spectrophotometry of the first (D1), second (D2), and third (D3) order derivatives in two-component mixtures and in pharmaceutical preparations. It was shown, that the developed method allows for the determination of the tested components in a direct manner, despite the apparent interference of the absorption spectra in the UV range. For quantitative determinations, "zero-crossing" method was chosen, appropriate wavelengths for zofenopril were: D1 λ=270.85 nm, D2 λ=286.38 nm, D3 λ=253.90 nm. Fluvastatin was determined at wavelengths: D1 λ=339.03 nm, D2 λ=252.57 nm, D3 λ=258.50 nm, respectively. The method was characterized by high sensitivity and accuracy, for zofenopril LOD was in the range of 0.19-0.87 μg mL(-1), for fluvastatin 0.51-1.18 μg mL(-1), depending on the class of derivative, and for zofenopril and fluvastatin LOQ was 0.57-2.64 μg mL(-1) and 1.56-3.57 μg mL(-1), respectively. The recovery of individual components was within the range of 100±5%. For zofenopril, the linearity range was estimated between 7.65 μg mL(-1) and 22.94 μg mL(-1), and for fluvastatin between 5.60 μg mL(-1) and 28.00 μg mL(-1). Copyright © 2015 Elsevier B.V. All rights reserved.

  17. 75 FR 16346 - Ophthalmic and Topical Dosage Form New Animal Drugs; Orbifloxacin, Mometasone Furoate Monohydrate...

    Science.gov (United States)

    2010-04-01

    ... posaconazole for the treatment of otitis externa in dogs. DATES: This rule is effective April 1, 2010. FOR... posaconazole) Otic Suspension for the treatment of otitis externa in dogs associated with susceptible strains... statement is required. Under section 512(c)(2)(F)(ii) of the Federal Food, Drug, and Cosmetic Act (21 U.S.C...

  18. 76 FR 12563 - Oral Dosage Form New Animal Drugs; Spinosad and Milbemycin Oxime

    Science.gov (United States)

    2011-03-08

    ... spinosad and milbemycin oxime in dogs for the treatment and prevention of flea infestations and for the... and milbemycin oxime) Chewable Tablets in dogs for the treatment and prevention of flea infestations... Friday. Under section 512(c)(2)(F)(ii) of the Federal Food, Drug, and Cosmetic Act (21 U.S.C. 360b(c)(2...

  19. 78 FR 42006 - Oral Dosage Form New Animal Drugs; Nicarbazin; Oclacitinib; Zilpaterol

    Science.gov (United States)

    2013-07-15

    ... associated with allergic dermatitis and control of atopic dermatitis in dogs at least 12 months of age. 200.... Therefore, under the Federal Food, Drug, and Cosmetic Act and under authority delegated to the Commissioner... control of atopic dermatitis in dogs at least 12 months of age. (3) Limitations. Federal law restricts...

  20. 75 FR 4692 - Ophthalmic and Topical Dosage Form New Animal Drugs; Miconazole, Polymixin B, and Prednisolone...

    Science.gov (United States)

    2010-01-29

    ... nitrate, polymixin B sulfate, and prednisolone acetate for the treatment of otitis externa in dogs. DATES... SUROLAN (miconazole nitrate, polymixin B sulfate, and prednisolone acetate) Otic Suspension in dogs for... Cosmetic Act (21 U.S.C. 360b(c)(2)(F)(ii)), this approval qualifies for 3 years of marketing exclusivity...