WorldWideScience

Sample records for gpfs file system

  1. GPFS HPSS Integration: Implementation Experience

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Damian; Hick, Jason

    2008-08-12

    In 2005 NERSC and IBM Global Services Federal began work to develop an integrated HSM solution using the GPFS file system and the HPSS hierarchical storage system. It was foreseen that this solution would play a key role in data management at NERSC, and fill a market niche for IBM. As with many large and complex software projects, there were a number of unforeseen difficulties encountered during implementation. As the effort progressed, it became apparent that DMAPI alone could not be used to tie two distributed, high performance systems together without serious impact on performance. This document discusses the evolution of the development effort, from one which attempted to synchronize the GPFS and HPSS name spaces relying solely on GPFS?s implementation of the DMAPI specification, to one with a more traditional HSM functionality that had no synchronized namespace in HPSS, and finally to an effort, still underway, which will provide traditional HSM functionality, but requires features from the GPFS Information Lifecycle Management (ILM) to fully achieve this goal in a way which is scalable and meets the needs of sites with aggressive performance requirements. The last approach makes concessions to portability by using file system features such as ILM and snapshotting in order to achieve a scalable design.

  2. On enhancing GridFTP and GPFS performances

    International Nuclear Information System (INIS)

    Cavalli, A; Ciocca, C; Dell'Agnello, L; Ferrari, T; Gregori, D; Martelli, B; Prosperini, A; Ricci, P; Ronchieri, E; Sapunenko, V; Vitlacil, D; Zani, S; Sartirana, A

    2010-01-01

    One of the most demanding tasks which Computing in High Energy Physics has to deal with is reliable and high throughput transfer of large data volumes. Maximization and optimization of the data throughput are therefore key issues which have to be addressed by detailed investigations of the involved infrastructures and services. In this note, we present some transfer performance tests carried out at the INFN-CNAF Tier-1 center, using SLC4 64-bit Grid File Transfer Protocol (GridFTP) servers and a disk storage system based on the General Parallel File System (GPFS) from IBM. We describe the testbed setup and report the measurements of throughput performances in function of some fundamental variables, such as number of parallel file and number of streams per transfer, concurrent read and write activity and size of data blocks transferred. During this activity, we have verified that a significant improvement in performances of the GridFTP server can be obtained using 64bit version of Operating System and GPFS from IBM.

  3. Parallel file system performances in fusion data storage

    International Nuclear Information System (INIS)

    Iannone, F.; Podda, S.; Bracco, G.; Manduchi, G.; Maslennikov, A.; Migliori, S.; Wolkersdorfer, K.

    2012-01-01

    High I/O flow rates, up to 10 GB/s, are required in large fusion Tokamak experiments like ITER where hundreds of nodes store simultaneously large amounts of data acquired during the plasma discharges. Typical network topologies such as linear arrays (systolic), rings, meshes (2-D arrays), tori (3-D arrays), trees, butterfly, hypercube in combination with high speed data transports like Infiniband or 10G-Ethernet, are the main areas in which the effort to overcome the so-called parallel I/O bottlenecks is most focused. The high I/O flow rates were modelled in an emulated testbed based on the parallel file systems such as Lustre and GPFS, commonly used in High Performance Computing. The test runs on High Performance Computing–For Fusion (8640 cores) and ENEA CRESCO (3392 cores) supercomputers. Message Passing Interface based applications were developed to emulate parallel I/O on Lustre and GPFS using data archival and access solutions like MDSPLUS and Universal Access Layer. These methods of data storage organization are widely diffused in nuclear fusion experiments and are being developed within the EFDA Integrated Tokamak Modelling – Task Force; the authors tried to evaluate their behaviour in a realistic emulation setup.

  4. Parallel file system performances in fusion data storage

    Energy Technology Data Exchange (ETDEWEB)

    Iannone, F., E-mail: francesco.iannone@enea.it [Associazione EURATOM-ENEA sulla Fusione, C.R.ENEA Frascati, via E.Fermi, 45 - 00044 Frascati, Rome (Italy); Podda, S.; Bracco, G. [ENEA Information Communication Tecnologies, Lungotevere Thaon di Revel, 76 - 00196 Rome (Italy); Manduchi, G. [Associazione EURATOM-ENEA sulla Fusione, Consorzio RFX, Corso Stati Uniti, 4 - 35127 Padua (Italy); Maslennikov, A. [CASPUR Inter-University Consortium for the Application of Super-Computing for Research, via dei Tizii, 6b - 00185 Rome (Italy); Migliori, S. [ENEA Information Communication Tecnologies, Lungotevere Thaon di Revel, 76 - 00196 Rome (Italy); Wolkersdorfer, K. [Juelich Supercomputing Centre-FZJ, D-52425 Juelich (Germany)

    2012-12-15

    High I/O flow rates, up to 10 GB/s, are required in large fusion Tokamak experiments like ITER where hundreds of nodes store simultaneously large amounts of data acquired during the plasma discharges. Typical network topologies such as linear arrays (systolic), rings, meshes (2-D arrays), tori (3-D arrays), trees, butterfly, hypercube in combination with high speed data transports like Infiniband or 10G-Ethernet, are the main areas in which the effort to overcome the so-called parallel I/O bottlenecks is most focused. The high I/O flow rates were modelled in an emulated testbed based on the parallel file systems such as Lustre and GPFS, commonly used in High Performance Computing. The test runs on High Performance Computing-For Fusion (8640 cores) and ENEA CRESCO (3392 cores) supercomputers. Message Passing Interface based applications were developed to emulate parallel I/O on Lustre and GPFS using data archival and access solutions like MDSPLUS and Universal Access Layer. These methods of data storage organization are widely diffused in nuclear fusion experiments and are being developed within the EFDA Integrated Tokamak Modelling - Task Force; the authors tried to evaluate their behaviour in a realistic emulation setup.

  5. Direct exploitation of a top 500 Supercomputer for Analysis of CMS Data

    International Nuclear Information System (INIS)

    Cabrillo, I; Cabellos, L; Marco, J; Fernandez, J; Gonzalez, I

    2014-01-01

    The Altamira Supercomputer hosted at the Instituto de Fisica de Cantatbria (IFCA) entered in operation in summer 2012. Its last generation FDR Infiniband network used (for message passing) in parallel jobs, supports the connection to General Parallel File System (GPFS) servers, enabling an efficient simultaneous processing of multiple data demanding jobs. Sharing a common GPFS system and a single LDAP-based identification with the existing Grid clusters at IFCA allows CMS researchers to exploit the large instantaneous capacity of this supercomputer to execute analysis jobs. The detailed experience describing this opportunistic use for skimming and final analysis of CMS 2012 data for a specific physics channel, resulting in an order of magnitude reduction of the waiting time, is presented.

  6. Storage management solutions and performance tests at the INFN Tier-1

    International Nuclear Information System (INIS)

    Bencivenni, M; Carbone, A; Chierici, A; D'Apice, A; Girolamo, D D; Dell'Agnello, L; Donatelli, M; Fella, A; Forti, A; Ghiselli, A; Italiano, A; Re, G L; Magnoni, L; Martelli, B; Mazzucato, M; Donvito, G; Furano, F; Marconi, U; Galli, D; Lanciotti, E

    2008-01-01

    Performance, reliability and scalability in data access are key issues in the context of HEP data processing and analysis applications. In this paper we present the results of a large scale performance measurement performed at the INFN-CNAF Tier-1, employing some storage solutions presently available for HEP computing, namely CASTOR, GPFS, Scalla/Xrootd and dCache. The storage infrastructure was based on Fibre Channel systems organized in a Storage Area Network, providing 260 TB of total disk space, and 24 disk servers connected to the computing farm (280 worker nodes) via Gigabit LAN. We also describe the deployment of a StoRM SRM instance at CNAF, configured to manage a GPFS file system, presenting and discussing its performances

  7. Cut-and-Paste file-systems : integrating simulators and file systems

    NARCIS (Netherlands)

    Bosch, H.G.P.; Mullender, Sape J.

    1996-01-01

    We have implemented an integrated and configurable file system called the PFS and a trace-driven file-system simulator called Patsy. Patsy is used for off-line analysis of file-system algorithms, PFS is used for on-line file-system data storage. Algorithms are first analyzed in Patsy and when we are

  8. IBM Software Defined Storage and ownCloud Enterprise Editon - a perfect match for hyperscale Enterprise File Sync and Share

    CERN Multimedia

    CERN. Geneva

    2014-01-01

    IBM Software Defined Storage, in particular the technology offering codenamed Elastic Storage (based on GPFS technology) has proven to be an ideal match for Enterprise File Sync and Share (EFSS) solutions that need highly scalable storage. The presentation will provide insight into the integration of Elastic Storage with the ownCloud Enterprise Edition (based on Open Source technology) software that showed impressive scalability and performance metrics during a proof-of-concept phase of an installation that is supposed to serve 300000 users when fully deployed.

  9. Composition and Realization of Source-to-Sink High-Performance Flows: File Systems, Storage, Hosts, LAN and WAN

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Chase Qishi [Univ. of Tennessee, Memphis, TN (United States)

    2016-12-01

    A number of Department of Energy (DOE) science applications, involving exascale computing systems and large experimental facilities, are expected to generate large volumes of data, in the range of petabytes to exabytes, which will be transported over wide-area networks for the purpose of storage, visualization, and analysis. To support such capabilities, significant progress has been made in various components including the deployment of 100 Gbps networks with future 1 Tbps bandwidth, increases in end-host capabilities with multiple cores and buses, capacity improvements in large disk arrays, and deployment of parallel file systems such as Lustre and GPFS. High-performance source-to-sink data flows must be composed of these component systems, which requires significant optimizations of the storage-to-host data and execution paths to match the edge and long-haul network connections. In particular, end systems are currently supported by 10-40 Gbps Network Interface Cards (NIC) and 8-32 Gbps storage Host Channel Adapters (HCAs), which carry the individual flows that collectively must reach network speeds of 100 Gbps and higher. Indeed, such data flows must be synthesized using multicore, multibus hosts connected to high-performance storage systems on one side and to the network on the other side. Current experimental results show that the constituent flows must be optimally composed and preserved from storage systems, across the hosts and the networks with minimal interference. Furthermore, such a capability must be made available transparently to the science users without placing undue demands on them to account for the details of underlying systems and networks. And, this task is expected to become even more complex in the future due to the increasing sophistication of hosts, storage systems, and networks that constitute the high-performance flows. The objectives of this proposal are to (1) develop and test the component technologies and their synthesis methods to

  10. Cut-and-Paste file-systems: integrating simulators and file systems

    NARCIS (Netherlands)

    Bosch, H.G.P.; Mullender, Sape J.

    1995-01-01

    We have implemented an integrated and configurable file system called the Pegasus filesystem (PFS) and a trace-driven file-system simulator called Patsy. Patsy is used for off-line analysis of file-systemalgorithms, PFS is used for on-line file-systemdata storage. Algorithms are first analyzed in

  11. Experiences on File Systems: Which is the best file system for you?

    CERN Document Server

    Blomer, J

    2015-01-01

    The distributed file system landscape is scattered. Besides a plethora of research file systems, there is also a large number of production grade file systems with various strengths and weaknesses. The file system, as an abstraction of permanent storage, is appealing because it provides application portability and integration with legacy and third-party applications, including UNIX utilities. On the other hand, the general and simple file system interface makes it notoriously difficult for a distributed file system to perform well under a variety of different workloads. This contribution provides a taxonomy of commonly used distributed file systems and points out areas of research and development that are particularly important for high-energy physics.

  12. Accessing files in an Internet: The Jade file system

    Science.gov (United States)

    Peterson, Larry L.; Rao, Herman C.

    1991-01-01

    Jade is a new distribution file system that provides a uniform way to name and access files in an internet environment. It makes two important contributions. First, Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Jade is designed under the restriction that the underlying file system may not be modified. Second, rather than providing a global name space, Jade permits each user to define a private name space. These private name spaces support two novel features: they allow multiple file systems to be mounted under one directory, and they allow one logical name space to mount other logical name spaces. A prototype of the Jade File System was implemented on Sun Workstations running Unix. It consists of interfaces to the Unix file system, the Sun Network File System, the Andrew File System, and FTP. This paper motivates Jade's design, highlights several aspects of its implementation, and illustrates applications that can take advantage of its features.

  13. Accessing files in an internet - The Jade file system

    Science.gov (United States)

    Rao, Herman C.; Peterson, Larry L.

    1993-01-01

    Jade is a new distribution file system that provides a uniform way to name and access files in an internet environment. It makes two important contributions. First, Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Jade is designed under the restriction that the underlying file system may not be modified. Second, rather than providing a global name space, Jade permits each user to define a private name space. These private name spaces support two novel features: they allow multiple file systems to be mounted under one directory, and they allow one logical name space to mount other logical name spaces. A prototype of the Jade File System was implemented on Sun Workstations running Unix. It consists of interfaces to the Unix file system, the Sun Network File System, the Andrew File System, and FTP. This paper motivates Jade's design, highlights several aspects of its implementation, and illustrates applications that can take advantage of its features.

  14. A Metadata-Rich File System

    Energy Technology Data Exchange (ETDEWEB)

    Ames, S; Gokhale, M B; Maltzahn, C

    2009-01-07

    Despite continual improvements in the performance and reliability of large scale file systems, the management of file system metadata has changed little in the past decade. The mismatch between the size and complexity of large scale data stores and their ability to organize and query their metadata has led to a de facto standard in which raw data is stored in traditional file systems, while related, application-specific metadata is stored in relational databases. This separation of data and metadata requires considerable effort to maintain consistency and can result in complex, slow, and inflexible system operation. To address these problems, we have developed the Quasar File System (QFS), a metadata-rich file system in which files, metadata, and file relationships are all first class objects. In contrast to hierarchical file systems and relational databases, QFS defines a graph data model composed of files and their relationships. QFS includes Quasar, an XPATH-extended query language for searching the file system. Results from our QFS prototype show the effectiveness of this approach. Compared to the defacto standard, the QFS prototype shows superior ingest performance and comparable query performance on user metadata-intensive operations and superior performance on normal file metadata operations.

  15. A File Archival System

    Science.gov (United States)

    Fanselow, J. L.; Vavrus, J. L.

    1984-01-01

    ARCH, file archival system for DEC VAX, provides for easy offline storage and retrieval of arbitrary files on DEC VAX system. System designed to eliminate situations that tie up disk space and lead to confusion when different programers develop different versions of same programs and associated files.

  16. An integrated solution for remote data access

    Science.gov (United States)

    Sapunenko, Vladimir; D'Urso, Domenico; dell'Agnello, Luca; Vagnoni, Vincenzo; Duranti, Matteo

    2015-12-01

    Data management constitutes one of the major challenges that a geographically- distributed e-Infrastructure has to face, especially when remote data access is involved. We discuss an integrated solution which enables transparent and efficient access to on-line and near-line data through high latency networks. The solution is based on the joint use of the General Parallel File System (GPFS) and of the Tivoli Storage Manager (TSM). Both products, developed by IBM, are well known and extensively used in the HEP computing community. Owing to a new feature introduced in GPFS 3.5, so-called Active File Management (AFM), the definition of a single, geographically-distributed namespace, characterised by automated data flow management between different locations, becomes possible. As a practical example, we present the implementation of AFM-based remote data access between two data centres located in Bologna and Rome, demonstrating the validity of the solution for the use case of the AMS experiment, an astro-particle experiment supported by the INFN CNAF data centre with the large disk space requirements (more than 1.5 PB).

  17. Building a parallel file system simulator

    International Nuclear Information System (INIS)

    Molina-Estolano, E; Maltzahn, C; Brandt, S A; Bent, J

    2009-01-01

    Parallel file systems are gaining in popularity in high-end computing centers as well as commercial data centers. High-end computing systems are expected to scale exponentially and to pose new challenges to their storage scalability in terms of cost and power. To address these challenges scientists and file system designers will need a thorough understanding of the design space of parallel file systems. Yet there exist few systematic studies of parallel file system behavior at petabyte- and exabyte scale. An important reason is the significant cost of getting access to large-scale hardware to test parallel file systems. To contribute to this understanding we are building a parallel file system simulator that can simulate parallel file systems at very large scale. Our goal is to simulate petabyte-scale parallel file systems on a small cluster or even a single machine in reasonable time and fidelity. With this simulator, file system experts will be able to tune existing file systems for specific workloads, scientists and file system deployment engineers will be able to better communicate workload requirements, file system designers and researchers will be able to try out design alternatives and innovations at scale, and instructors will be able to study very large-scale parallel file system behavior in the class room. In this paper we describe our approach and provide preliminary results that are encouraging both in terms of fidelity and simulation scalability.

  18. Zebra: A striped network file system

    Science.gov (United States)

    Hartman, John H.; Ousterhout, John K.

    1992-01-01

    The design of Zebra, a striped network file system, is presented. Zebra applies ideas from log-structured file system (LFS) and RAID research to network file systems, resulting in a network file system that has scalable performance, uses its servers efficiently even when its applications are using small files, and provides high availability. Zebra stripes file data across multiple servers, so that the file transfer rate is not limited by the performance of a single server. High availability is achieved by maintaining parity information for the file system. If a server fails its contents can be reconstructed using the contents of the remaining servers and the parity information. Zebra differs from existing striped file systems in the way it stripes file data: Zebra does not stripe on a per-file basis; instead it stripes the stream of bytes written by each client. Clients write to the servers in units called stripe fragments, which are analogous to segments in an LFS. Stripe fragments contain file blocks that were written recently, without regard to which file they belong. This method of striping has numerous advantages over per-file striping, including increased server efficiency, efficient parity computation, and elimination of parity update.

  19. Formalizing a hierarchical file system

    NARCIS (Netherlands)

    Hesselink, Wim H.; Lali, Muhammad Ikram

    An abstract file system is defined here as a partial function from (absolute) paths to data. Such a file system determines the set of valid paths. It allows the file system to be read and written at a valid path, and it allows the system to be modified by the Unix operations for creation, removal,

  20. The Galley Parallel File System

    Science.gov (United States)

    Nieuwejaar, Nils; Kotz, David

    1996-01-01

    Most current multiprocessor file systems are designed to use multiple disks in parallel, using the high aggregate bandwidth to meet the growing I/0 requirements of parallel scientific applications. Many multiprocessor file systems provide applications with a conventional Unix-like interface, allowing the application to access multiple disks transparently. This interface conceals the parallelism within the file system, increasing the ease of programmability, but making it difficult or impossible for sophisticated programmers and libraries to use knowledge about their I/O needs to exploit that parallelism. In addition to providing an insufficient interface, most current multiprocessor file systems are optimized for a different workload than they are being asked to support. We introduce Galley, a new parallel file system that is intended to efficiently support realistic scientific multiprocessor workloads. We discuss Galley's file structure and application interface, as well as the performance advantages offered by that interface.

  1. Formalizing a Hierarchical File System

    NARCIS (Netherlands)

    Hesselink, Wim H.; Lali, M.I.

    2009-01-01

    In this note, we define an abstract file system as a partial function from (absolute) paths to data. Such a file system determines the set of valid paths. It allows the file system to be read and written at a valid path, and it allows the system to be modified by the Unix operations for removal

  2. The Jade File System. Ph.D. Thesis

    Science.gov (United States)

    Rao, Herman Chung-Hwa

    1991-01-01

    File systems have long been the most important and most widely used form of shared permanent storage. File systems in traditional time-sharing systems, such as Unix, support a coherent sharing model for multiple users. Distributed file systems implement this sharing model in local area networks. However, most distributed file systems fail to scale from local area networks to an internet. Four characteristics of scalability were recognized: size, wide area, autonomy, and heterogeneity. Owing to size and wide area, techniques such as broadcasting, central control, and central resources, which are widely adopted by local area network file systems, are not adequate for an internet file system. An internet file system must also support the notion of autonomy because an internet is made up by a collection of independent organizations. Finally, heterogeneity is the nature of an internet file system, not only because of its size, but also because of the autonomy of the organizations in an internet. The Jade File System, which provides a uniform way to name and access files in the internet environment, is presented. Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Because of autonomy, Jade is designed under the restriction that the underlying file systems may not be modified. In order to avoid the complexity of maintaining an internet-wide, global name space, Jade permits each user to define a private name space. In Jade's design, we pay careful attention to avoiding unnecessary network messages between clients and file servers in order to achieve acceptable performance. Jade's name space supports two novel features: (1) it allows multiple file systems to be mounted under one direction; and (2) it permits one logical name space to mount other logical name spaces. A prototype of Jade was implemented to examine and validate its

  3. An analysis of file system and installation of the file management system for NOS operating system

    International Nuclear Information System (INIS)

    Lee, Young Jai; Park, Sun Hee; Hwang, In Ah; Kim, Hee Kyung

    1992-06-01

    In this technical report, we analyze NOS file structure for Cyber 170-875 and Cyber 960-31 computer system. We also describe functions, procedure and how-to-operate and how-to-use of VDS. VDS is used to manage large files effectively for Cyber computer system. The purpose of the VDS installation is to increase the virtual disk storage by utilizing magnetic tape, to assist the users of the computer system in managing their files, and to enhance the performance of KAERI Cyber computer system. (Author)

  4. Mixed-Media File Systems

    NARCIS (Netherlands)

    Bosch, H.G.P.

    1999-01-01

    This thesis addresses the problem of implementing mixed-media storage systems. In this work a mixed-media file system is defined to be a system that stores both conventional (best-effort) file data and real-time continuous-media data. Continuous-media data is usually bulky, and servers storing and

  5. The Global File System

    Science.gov (United States)

    Soltis, Steven R.; Ruwart, Thomas M.; OKeefe, Matthew T.

    1996-01-01

    The global file system (GFS) is a prototype design for a distributed file system in which cluster nodes physically share storage devices connected via a network-like fiber channel. Networks and network-attached storage devices have advanced to a level of performance and extensibility so that the previous disadvantages of shared disk architectures are no longer valid. This shared storage architecture attempts to exploit the sophistication of storage device technologies whereas a server architecture diminishes a device's role to that of a simple component. GFS distributes the file system responsibilities across processing nodes, storage across the devices, and file system resources across the entire storage pool. GFS caches data on the storage devices instead of the main memories of the machines. Consistency is established by using a locking mechanism maintained by the storage devices to facilitate atomic read-modify-write operations. The locking mechanism is being prototyped in the Silicon Graphics IRIX operating system and is accessed using standard Unix commands and modules.

  6. PFS: a distributed and customizable file system

    OpenAIRE

    Bosch, H.G.P.; Mullender, Sape J.

    1996-01-01

    In this paper we present our ongoing work on the Pegasus File System (PFS), a distributed and customizable file system that can be used for off-line file system experiments and on-line file system storage. PFS is best described as an object-oriented component library from which either a true file system or a file-system simulator can be constructed. Each of the components in the library is easily replaced by another implementation to accommodate a wide range of applications.

  7. PFS: a distributed and customizable file system

    NARCIS (Netherlands)

    Bosch, H.G.P.; Mullender, Sape J.

    1996-01-01

    In this paper we present our ongoing work on the Pegasus File System (PFS), a distributed and customizable file system that can be used for off-line file system experiments and on-line file system storage. PFS is best described as an object-oriented component library from which either a true file

  8. Deceit: A flexible distributed file system

    Science.gov (United States)

    Siegel, Alex; Birman, Kenneth; Marzullo, Keith

    1989-01-01

    Deceit, a distributed file system (DFS) being developed at Cornell, focuses on flexible file semantics in relation to efficiency, scalability, and reliability. Deceit servers are interchangeable and collectively provide the illusion of a single, large server machine to any clients of the Deceit service. Non-volatile replicas of each file are stored on a subset of the file servers. The user is able to set parameters on a file to achieve different levels of availability, performance, and one-copy serializability. Deceit also supports a file version control mechanism. In contrast with many recent DFS efforts, Deceit can behave like a plain Sun Network File System (NFS) server and can be used by any NFS client without modifying any client software. The current Deceit prototype uses the ISIS Distributed Programming Environment for all communication and process group management, an approach that reduces system complexity and increases system robustness.

  9. Virtual file system for PSDS

    Science.gov (United States)

    Runnels, Tyson D.

    1993-01-01

    This is a case study. It deals with the use of a 'virtual file system' (VFS) for Boeing's UNIX-based Product Standards Data System (PSDS). One of the objectives of PSDS is to store digital standards documents. The file-storage requirements are that the files must be rapidly accessible, stored for long periods of time - as though they were paper, protected from disaster, and accumulative to about 80 billion characters (80 gigabytes). This volume of data will be approached in the first two years of the project's operation. The approach chosen is to install a hierarchical file migration system using optical disk cartridges. Files are migrated from high-performance media to lower performance optical media based on a least-frequency-used algorithm. The optical media are less expensive per character stored and are removable. Vital statistics about the removable optical disk cartridges are maintained in a database. The assembly of hardware and software acts as a single virtual file system transparent to the PSDS user. The files are copied to 'backup-and-recover' media whose vital statistics are also stored in the database. Seventeen months into operation, PSDS is storing 49 gigabytes. A number of operational and performance problems were overcome. Costs are under control. New and/or alternative uses for the VFS are being considered.

  10. The File System Interface is an Anachronism

    OpenAIRE

    Ellard, Daniel

    2003-01-01

    Contemporary file systems implement a set of abstractions and semantics that are suboptimal for many (if not most) purposes. The philosophy of using the simple mechanisms of the file system as the basis for a vast array of higher-level mechanisms leads to inefficient and incorrect implementations. We propose several extensions to the canonical file system model, including explicit support for lock files, indexed files, and resource forks, and the benefit of session semantics for write updates...

  11. Apically extruded dentin debris by reciprocating single-file and multi-file rotary system.

    Science.gov (United States)

    De-Deus, Gustavo; Neves, Aline; Silva, Emmanuel João; Mendonça, Thais Accorsi; Lourenço, Caroline; Calixto, Camila; Lima, Edson Jorge Moreira

    2015-03-01

    This study aims to evaluate the apical extrusion of debris by the two reciprocating single-file systems: WaveOne and Reciproc. Conventional multi-file rotary system was used as a reference for comparison. The hypotheses tested were (i) the reciprocating single-file systems extrude more than conventional multi-file rotary system and (ii) the reciprocating single-file systems extrude similar amounts of dentin debris. After solid selection criteria, 80 mesial roots of lower molars were included in the present study. The use of four different instrumentation techniques resulted in four groups (n = 20): G1 (hand-file technique), G2 (ProTaper), G3 (WaveOne), and G4 (Reciproc). The apparatus used to evaluate the collection of apically extruded debris was typical double-chamber collector. Statistical analysis was performed for multiple comparisons. No significant difference was found in the amount of the debris extruded between the two reciprocating systems. In contrast, conventional multi-file rotary system group extruded significantly more debris than both reciprocating groups. Hand instrumentation group extruded significantly more debris than all other groups. The present results yielded favorable input for both reciprocation single-file systems, inasmuch as they showed an improved control of apically extruded debris. Apical extrusion of debris has been studied extensively because of its clinical relevance, particularly since it may cause flare-ups, originated by the introduction of bacteria, pulpal tissue, and irrigating solutions into the periapical tissues.

  12. Protecting your files on the DFS file system

    CERN Multimedia

    Computer Security Team

    2011-01-01

    The Windows Distributed File System (DFS) hosts user directories for all NICE users plus many more data.    Files can be accessed from anywhere, via a dedicated web portal (http://cern.ch/dfs). Due to the ease of access to DFS with in CERN it is of utmost importance to properly protect access to sensitive data. As the use of DFS access control mechanisms is not obvious to all users, passwords, certificates or sensitive files might get exposed. At least this happened in past to the Andrews File System (AFS) - the Linux equivalent to DFS) - and led to bad publicity due to a journalist accessing supposedly "private" AFS folders (SonntagsZeitung 2009/11/08). This problem does not only affect the individual user but also has a bad impact on CERN's reputation when it comes to IT security. Therefore, all departments and LHC experiments agreed recently to apply more stringent protections to all DFS user folders. The goal of this data protection policy is to assist users in pro...

  13. Protecting your files on the AFS file system

    CERN Multimedia

    2011-01-01

    The Andrew File System is a world-wide distributed file system linking hundreds of universities and organizations, including CERN. Files can be accessed from anywhere, via dedicated AFS client programs or via web interfaces that export the file contents on the web. Due to the ease of access to AFS it is of utmost importance to properly protect access to sensitive data in AFS. As the use of AFS access control mechanisms is not obvious to all users, passwords, private SSH keys or certificates have been exposed in the past. In one specific instance, this also led to bad publicity due to a journalist accessing supposedly "private" AFS folders (SonntagsZeitung 2009/11/08). This problem does not only affect the individual user but also has a bad impact on CERN's reputation when it comes to IT security. Therefore, all departments and LHC experiments agreed in April 2010 to apply more stringent folder protections to all AFS user folders. The goal of this data protection policy is to assist users in...

  14. Storage of sparse files using parallel log-structured file system

    Science.gov (United States)

    Bent, John M.; Faibish, Sorin; Grider, Gary; Torres, Aaron

    2017-11-07

    A sparse file is stored without holes by storing a data portion of the sparse file using a parallel log-structured file system; and generating an index entry for the data portion, the index entry comprising a logical offset, physical offset and length of the data portion. The holes can be restored to the sparse file upon a reading of the sparse file. The data portion can be stored at a logical end of the sparse file. Additional storage efficiency can optionally be achieved by (i) detecting a write pattern for a plurality of the data portions and generating a single patterned index entry for the plurality of the patterned data portions; and/or (ii) storing the patterned index entries for a plurality of the sparse files in a single directory, wherein each entry in the single directory comprises an identifier of a corresponding sparse file.

  15. Computer Forensics Method in Analysis of Files Timestamps in Microsoft Windows Operating System and NTFS File System

    Directory of Open Access Journals (Sweden)

    Vesta Sergeevna Matveeva

    2013-02-01

    Full Text Available All existing file browsers displays 3 timestamps for every file in file system NTFS. Nowadays there are a lot of utilities that can manipulate temporal attributes to conceal the traces of file using. However every file in NTFS has 8 timestamps that are stored in file record and used in detecting the fact of attributes substitution. The authors suggest a method of revealing original timestamps after replacement and automated variant of it in case of a set of files.

  16. Small file aggregation in a parallel computing system

    Science.gov (United States)

    Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Grider, Gary; Zhang, Jingwang

    2014-09-02

    Techniques are provided for small file aggregation in a parallel computing system. An exemplary method for storing a plurality of files generated by a plurality of processes in a parallel computing system comprises aggregating the plurality of files into a single aggregated file; and generating metadata for the single aggregated file. The metadata comprises an offset and a length of each of the plurality of files in the single aggregated file. The metadata can be used to unpack one or more of the files from the single aggregated file.

  17. MR-AFS: a global hierarchical file-system

    International Nuclear Information System (INIS)

    Reuter, H.

    2000-01-01

    The next generation of fusion experiments will use object-oriented technology creating the need for world wide sharing of an underlying hierarchical file-system. The Andrew file system (AFS) is a well known and widely spread global distributed file-system. Multiple-resident-AFS (MR-AFS) combines the features of AFS with hierarchical storage management systems. Files in MR-AFS therefore may be migrated on secondary storage, such as roboted tape libraries. MR-AFS is in use at IPP for the current experiments and data originating from super-computer applications. Experiences and scalability issues are discussed

  18. Improving File System Performance by Striping

    Science.gov (United States)

    Lam, Terance L.; Kutler, Paul (Technical Monitor)

    1998-01-01

    This document discusses the performance and advantages of striped file systems on the SGI AD workstations. Performance of several striped file system configurations are compared and guidelines for optimal striping are recommended.

  19. Storing files in a parallel computing system using list-based index to identify replica files

    Science.gov (United States)

    Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Zhang, Zhenhua; Grider, Gary

    2015-07-21

    Improved techniques are provided for storing files in a parallel computing system using a list-based index to identify file replicas. A file and at least one replica of the file are stored in one or more storage nodes of the parallel computing system. An index for the file comprises at least one list comprising a pointer to a storage location of the file and a storage location of the at least one replica of the file. The file comprises one or more of a complete file and one or more sub-files. The index may also comprise a checksum value for one or more of the file and the replica(s) of the file. The checksum value can be evaluated to validate the file and/or the file replica(s). A query can be processed using the list.

  20. DMFS: A Data Migration File System for NetBSD

    Science.gov (United States)

    Studenmund, William

    2000-01-01

    I have recently developed DMFS, a Data Migration File System, for NetBSD. This file system provides kernel support for the data migration system being developed by my research group at NASA/Ames. The file system utilizes an underlying file store to provide the file backing, and coordinates user and system access to the files. It stores its internal metadata in a flat file, which resides on a separate file system. This paper will first describe our data migration system to provide a context for DMFS, then it will describe DMFS. It also will describe the changes to NetBSD needed to make DMFS work. Then it will give an overview of the file archival and restoration procedures, and describe how some typical user actions are modified by DMFS. Lastly, the paper will present simple performance measurements which indicate that there is little performance loss due to the use of the DMFS layer.

  1. Flexibility and Performance of Parallel File Systems

    Science.gov (United States)

    Kotz, David; Nieuwejaar, Nils

    1996-01-01

    As we gain experience with parallel file systems, it becomes increasingly clear that a single solution does not suit all applications. For example, it appears to be impossible to find a single appropriate interface, caching policy, file structure, or disk-management strategy. Furthermore, the proliferation of file-system interfaces and abstractions make applications difficult to port. We propose that the traditional functionality of parallel file systems be separated into two components: a fixed core that is standard on all platforms, encapsulating only primitive abstractions and interfaces, and a set of high-level libraries to provide a variety of abstractions and application-programmer interfaces (API's). We present our current and next-generation file systems as examples of this structure. Their features, such as a three-dimensional file structure, strided read and write interfaces, and I/O-node programs, are specifically designed with the flexibility and performance necessary to support a wide range of applications.

  2. Design and Implementation of a Metadata-rich File System

    Energy Technology Data Exchange (ETDEWEB)

    Ames, S; Gokhale, M B; Maltzahn, C

    2010-01-19

    Despite continual improvements in the performance and reliability of large scale file systems, the management of user-defined file system metadata has changed little in the past decade. The mismatch between the size and complexity of large scale data stores and their ability to organize and query their metadata has led to a de facto standard in which raw data is stored in traditional file systems, while related, application-specific metadata is stored in relational databases. This separation of data and semantic metadata requires considerable effort to maintain consistency and can result in complex, slow, and inflexible system operation. To address these problems, we have developed the Quasar File System (QFS), a metadata-rich file system in which files, user-defined attributes, and file relationships are all first class objects. In contrast to hierarchical file systems and relational databases, QFS defines a graph data model composed of files and their relationships. QFS incorporates Quasar, an XPATH-extended query language for searching the file system. Results from our QFS prototype show the effectiveness of this approach. Compared to the de facto standard, the QFS prototype shows superior ingest performance and comparable query performance on user metadata-intensive operations and superior performance on normal file metadata operations.

  3. Dynamic Non-Hierarchical File Systems for Exascale Storage

    Energy Technology Data Exchange (ETDEWEB)

    Long, Darrell E. [Univ. of California, Santa Cruz, CA (United States); Miller, Ethan L [Univ. of California, Santa Cruz, CA (United States)

    2015-02-24

    This constitutes the final report for “Dynamic Non-Hierarchical File Systems for Exascale Storage”. The ultimate goal of this project was to improve data management in scientific computing and high-end computing (HEC) applications, and to achieve this goal we proposed: to develop the first, HEC-targeted, file system featuring rich metadata and provenance collection, extreme scalability, and future storage hardware integration as core design goals, and to evaluate and develop a flexible non-hierarchical file system interface suitable for providing more powerful and intuitive data management interfaces to HEC and scientific computing users. Data management is swiftly becoming a serious problem in the scientific community – while copious amounts of data are good for obtaining results, finding the right data is often daunting and sometimes impossible. Scientists participating in a Department of Energy workshop noted that most of their time was spent “...finding, processing, organizing, and moving data and it’s going to get much worse”. Scientists should not be forced to become data mining experts in order to retrieve the data they want, nor should they be expected to remember the naming convention they used several years ago for a set of experiments they now wish to revisit. Ideally, locating the data you need would be as easy as browsing the web. Unfortunately, existing data management approaches are usually based on hierarchical naming, a 40 year-old technology designed to manage thousands of files, not exabytes of data. Today’s systems do not take advantage of the rich array of metadata that current high-end computing (HEC) file systems can gather, including content-based metadata and provenance1 information. As a result, current metadata search approaches are typically ad hoc and often work by providing a parallel management system to the “main” file system, as is done in Linux (the locate utility), personal computers, and enterprise search

  4. Collective operations in a file system based execution model

    Science.gov (United States)

    Shinde, Pravin; Van Hensbergen, Eric

    2013-02-19

    A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

  5. Performance of the Galley Parallel File System

    Science.gov (United States)

    Nieuwejaar, Nils; Kotz, David

    1996-01-01

    As the input/output (I/O) needs of parallel scientific applications increase, file systems for multiprocessors are being designed to provide applications with parallel access to multiple disks. Many parallel file systems present applications with a conventional Unix-like interface that allows the application to access multiple disks transparently. This interface conceals the parallism within the file system, which increases the ease of programmability, but makes it difficult or impossible for sophisticated programmers and libraries to use knowledge about their I/O needs to exploit that parallelism. Furthermore, most current parallel file systems are optimized for a different workload than they are being asked to support. We introduce Galley, a new parallel file system that is intended to efficiently support realistic parallel workloads. Initial experiments, reported in this paper, indicate that Galley is capable of providing high-performance 1/O to applications the applications that rely on them. In Section 3 we describe that access data in patterns that have been observed to be common.

  6. RAMA: A file system for massively parallel computers

    Science.gov (United States)

    Miller, Ethan L.; Katz, Randy H.

    1993-01-01

    This paper describes a file system design for massively parallel computers which makes very efficient use of a few disks per processor. This overcomes the traditional I/O bottleneck of massively parallel machines by storing the data on disks within the high-speed interconnection network. In addition, the file system, called RAMA, requires little inter-node synchronization, removing another common bottleneck in parallel processor file systems. Support for a large tertiary storage system can easily be integrated in lo the file system; in fact, RAMA runs most efficiently when tertiary storage is used.

  7. Specifying a Realistic File System

    Directory of Open Access Journals (Sweden)

    Sidney Amani

    2015-11-01

    Full Text Available We present the most interesting elements of the correctness specification of BilbyFs, a performant Linux flash file system. The BilbyFs specification supports asynchronous writes, a feature that has been overlooked by several file system verification projects, and has been used to verify the correctness of BilbyFs's fsync( C implementation. It makes use of nondeterminism to be concise and is shallowly-embedded in higher-order logic.

  8. Adding Data Management Services to Parallel File Systems

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, Scott [Univ. of California, Santa Cruz, CA (United States)

    2015-03-04

    The objective of this project, called DAMASC for “Data Management in Scientific Computing”, is to coalesce data management with parallel file system management to present a declarative interface to scientists for managing, querying, and analyzing extremely large data sets efficiently and predictably. Managing extremely large data sets is a key challenge of exascale computing. The overhead, energy, and cost of moving massive volumes of data demand designs where computation is close to storage. In current architectures, compute/analysis clusters access data in a physically separate parallel file system and largely leave it scientist to reduce data movement. Over the past decades the high-end computing community has adopted middleware with multiple layers of abstractions and specialized file formats such as NetCDF-4 and HDF5. These abstractions provide a limited set of high-level data processing functions, but have inherent functionality and performance limitations: middleware that provides access to the highly structured contents of scientific data files stored in the (unstructured) file systems can only optimize to the extent that file system interfaces permit; the highly structured formats of these files often impedes native file system performance optimizations. We are developing Damasc, an enhanced high-performance file system with native rich data management services. Damasc will enable efficient queries and updates over files stored in their native byte-stream format while retaining the inherent performance of file system data storage via declarative queries and updates over views of underlying files. Damasc has four key benefits for the development of data-intensive scientific code: (1) applications can use important data-management services, such as declarative queries, views, and provenance tracking, that are currently available only within database systems; (2) the use of these services becomes easier, as they are provided within a familiar file

  9. Clockwise: A Mixed-Media File System

    NARCIS (Netherlands)

    Bosch, H.G.P.; Jansen, P.G.; Mullender, Sape J.

    This (short) paper presents the Clockwise, a mixed-media file system. The primary goal of the Clockwise is to provide a storage architecture that supports the storage and retrieval of best-effort and real-time file system data. Clockwise provides an abstraction called a dynamic partition that groups

  10. Optimizing Input/Output Using Adaptive File System Policies

    Science.gov (United States)

    Madhyastha, Tara M.; Elford, Christopher L.; Reed, Daniel A.

    1996-01-01

    Parallel input/output characterization studies and experiments with flexible resource management algorithms indicate that adaptivity is crucial to file system performance. In this paper we propose an automatic technique for selecting and refining file system policies based on application access patterns and execution environment. An automatic classification framework allows the file system to select appropriate caching and pre-fetching policies, while performance sensors provide feedback used to tune policy parameters for specific system environments. To illustrate the potential performance improvements possible using adaptive file system policies, we present results from experiments involving classification-based and performance-based steering.

  11. Development of an integrated filing system for endoscopic images.

    Science.gov (United States)

    Fujino, M A; Ikeda, M; Yamamoto, Y; Kinose, T; Tachikawa, H; Morozumi, A; Sano, S; Kojima, Y; Nakamura, T; Kawai, T

    1991-01-01

    A new integrated filing system for endoscopic images has been developed, comprising a main image filing system and subsystems located at different stations. A hybrid filing system made up of both digital and analog filing devices was introduced to construct this system that combines the merits of the two filing methods. Each subsystem provided with a video processor, is equipped with a digital filing device, and routine images were recorded in the analog image filing device of the main system. The use of a multi-input adapter enabled simultaneous input of analog images from up to 8 video processors. Recorded magneto-optical disks make it possible to recall the digital images at any station in the hospital; the disks are copied without image degradation and also utilised for image processing. This system promises reliable storage and integrated, efficient management of endoscopic information. It also costs less to install than the so-called PACS (picture archiving and communication system), which connects all the stations of the hospital using optical fiber cables.

  12. 78 FR 21930 - Aquenergy Systems, Inc.; Notice of Intent To File License Application, Filing of Pre-Application...

    Science.gov (United States)

    2013-04-12

    ... Systems, Inc.; Notice of Intent To File License Application, Filing of Pre-Application Document, and Approving Use of the Traditional Licensing Process a. Type of Filing: Notice of Intent to File License...: November 11, 2012. d. Submitted by: Aquenergy Systems, Inc., a fully owned subsidiaries of Enel Green Power...

  13. High-Performance, Multi-Node File Copies and Checksums for Clustered File Systems

    Science.gov (United States)

    Kolano, Paul Z.; Ciotti, Robert B.

    2012-01-01

    Modern parallel file systems achieve high performance using a variety of techniques, such as striping files across multiple disks to increase aggregate I/O bandwidth and spreading disks across multiple servers to increase aggregate interconnect bandwidth. To achieve peak performance from such systems, it is typically necessary to utilize multiple concurrent readers/writers from multiple systems to overcome various singlesystem limitations, such as number of processors and network bandwidth. The standard cp and md5sum tools of GNU coreutils found on every modern Unix/Linux system, however, utilize a single execution thread on a single CPU core of a single system, and hence cannot take full advantage of the increased performance of clustered file systems. Mcp and msum are drop-in replacements for the standard cp and md5sum programs that utilize multiple types of parallelism and other optimizations to achieve maximum copy and checksum performance on clustered file systems. Multi-threading is used to ensure that nodes are kept as busy as possible. Read/write parallelism allows individual operations of a single copy to be overlapped using asynchronous I/O. Multinode cooperation allows different nodes to take part in the same copy/checksum. Split-file processing allows multiple threads to operate concurrently on the same file. Finally, hash trees allow inherently serial checksums to be performed in parallel. Mcp and msum provide significant performance improvements over standard cp and md5sum using multiple types of parallelism and other optimizations. The total speed-ups from all improvements are significant. Mcp improves cp performance over 27x, msum improves md5sum performance almost 19x, and the combination of mcp and msum improves verified copies via cp and md5sum by almost 22x. These improvements come in the form of drop-in replacements for cp and md5sum, so are easily used and are available for download as open source software at http://mutil.sourceforge.net.

  14. Non-POSIX File System for LHCb Online Event Handling

    CERN Document Server

    Garnier, J C; Cherukuwada, S S

    2011-01-01

    LHCb aims to use its O(20000) CPU cores in the high level trigger (HLT) and its 120 TB Online storage system for data reprocessing during LHC shutdown periods. These periods can last a few days for technical maintenance or only a few hours during beam interfill gaps. These jobs run on files which are staged in from tape storage to the local storage buffer. The result are again one or more files. Efficient file writing and reading is essential for the performance of the system. Rather than using a traditional shared file-system such as NFS or CIFS we have implemented a custom, light-weight, non-Posix network file-system for the handling of these files. Streaming this file-system for the data-access allows to obtain high performance, while at the same time keep the resource consumption low and add nice features not found in NFS such as high-availability, transparent fail-over of the read and write service. The writing part of this streaming service is in successful use for the Online, real-time writing of the d...

  15. The design and development of GRASS file reservation system

    International Nuclear Information System (INIS)

    Huang Qiulan; Zhu Suijiang; Cheng Yaodong; Chen Gang

    2010-01-01

    GFRS (GRASS File Reservation System) is designed to improve the file access performance of GRASS (Grid-enabled Advanced Storage System) which is a Hierarchical Storage Management (HSM) system developed at Computing Center, Institute of High Energy Physics. GRASS can provide massive storage management and data migration, but the data migration policy is simply based factors such as pool water level, the intervals for migration and so on, so it is short of precise control over files. As for that, we design GFRS to implement user-based file reservation which is to reserve and keep the required files on disks for High Energy physicists. CFRS can improve file access speed for users by avoiding migrating frequently accessed files to tapes. In this paper we first give a brief introduction of GRASS system and then detailed architecture and implementation of GFRS. Experiments results from GFRS have shown good performance and a simple analysis is made based on it. (authors)

  16. Athos: Efficient Authentication of Outsourced File Systems

    DEFF Research Database (Denmark)

    Triandopoulos, Nikolaos; Goodrich, Michael T.; Papamanthou, Charalampos

    2008-01-01

    We study the problem of authenticated storage, where we wish to construct protocols that allow to outsource any complex file system to an untrusted server and yet ensure the file-system's integrity. We introduce Athos, a new, platform-independent and user-transparent architecture for authenticated...

  17. Research of Performance Linux Kernel File Systems

    Directory of Open Access Journals (Sweden)

    Andrey Vladimirovich Ostroukh

    2015-10-01

    Full Text Available The article describes the most common Linux Kernel File Systems. The research was carried out on a personal computer, the characteristics of which are written in the article. The study was performed on a typical workstation running GNU/Linux with below characteristics. On a personal computer for measuring the file performance, has been installed the necessary software. Based on the results, conclusions and proposed recommendations for use of file systems. Identified and recommended by the best ways to store data.

  18. Final Report for File System Support for Burst Buffers on HPC Systems

    Energy Technology Data Exchange (ETDEWEB)

    Yu, W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mohror, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-11-27

    Distributed burst buffers are a promising storage architecture for handling I/O workloads for exascale computing. As they are being deployed on more supercomputers, a file system that efficiently manages these burst buffers for fast I/O operations carries great consequence. Over the past year, FSU team has undertaken several efforts to design, prototype and evaluate distributed file systems for burst buffers on HPC systems. These include MetaKV: a Key-Value Store for Metadata Management of Distributed Burst Buffers, a user-level file system with multiple backends, and a specialized file system for large datasets of deep neural networks. Our progress for these respective efforts are elaborated further in this report.

  19. pcircle - A Suite of Scalable Parallel File System Tools

    Energy Technology Data Exchange (ETDEWEB)

    2015-10-01

    Most of the software related to file system are written for conventional local file system, they are serialized and can't take advantage of the benefit of a large scale parallel file system. "pcircle" software builds on top of ubiquitous MPI in cluster computing environment and "work-stealing" pattern to provide a scalable, high-performance suite of file system tools. In particular - it implemented parallel data copy and parallel data checksumming, with advanced features such as async progress report, checkpoint and restart, as well as integrity checking.

  20. Multi-level, automatic file management system using magnetic disk, mass storage system and magnetic tape

    International Nuclear Information System (INIS)

    Fujii, Minoru; Asai, Kiyoshi

    1979-12-01

    A simple, effective file management system using magnetic disk, mass storage system (MSS) and magnetic tape is described. Following are the concepts and techniques introduced in this file management system. (1) File distribution and continuity character of file references are closely approximated by memory retention function. A density function using the memory retention function is thus defined. (2) A method of computing the cost/benefit lines for magnetic disk, MSS and magnetic tape is presented. (3) A decision process of an optimal organization of file facilities incorporating file demands distribution to respective file devices, is presented. (4) A method of simple, practical, effective, automatic file management, incorporating multi-level file management, space management and file migration control, is proposed. (author)

  1. Distributed PACS using distributed file system with hierarchical meta data servers.

    Science.gov (United States)

    Hiroyasu, Tomoyuki; Minamitani, Yoshiyuki; Miki, Mitsunori; Yokouchi, Hisatake; Yoshimi, Masato

    2012-01-01

    In this research, we propose a new distributed PACS (Picture Archiving and Communication Systems) which is available to integrate several PACSs that exist in each medical institution. The conventional PACS controls DICOM file into one data-base. On the other hand, in the proposed system, DICOM file is separated into meta data and image data and those are stored individually. Using this mechanism, since file is not always accessed the entire data, some operations such as finding files, changing titles, and so on can be performed in high-speed. At the same time, as distributed file system is utilized, accessing image files can also achieve high-speed access and high fault tolerant. The introduced system has a more significant point. That is the simplicity to integrate several PACSs. In the proposed system, only the meta data servers are integrated and integrated system can be constructed. This system also has the scalability of file access with along to the number of file numbers and file sizes. On the other hand, because meta-data server is integrated, the meta data server is the weakness of this system. To solve this defect, hieratical meta data servers are introduced. Because of this mechanism, not only fault--tolerant ability is increased but scalability of file access is also increased. To discuss the proposed system, the prototype system using Gfarm was implemented. For evaluating the implemented system, file search operating time of Gfarm and NFS were compared.

  2. Tuning HDF5 subfiling performance on parallel file systems

    Energy Technology Data Exchange (ETDEWEB)

    Byna, Suren [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chaarawi, Mohamad [Intel Corp. (United States); Koziol, Quincey [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mainzer, John [The HDF Group (United States); Willmore, Frank [The HDF Group (United States)

    2017-05-12

    Subfiling is a technique used on parallel file systems to reduce locking and contention issues when multiple compute nodes interact with the same storage target node. Subfiling provides a compromise between the single shared file approach that instigates the lock contention problems on parallel file systems and having one file per process, which results in generating a massive and unmanageable number of files. In this paper, we evaluate and tune the performance of recently implemented subfiling feature in HDF5. In specific, we explain the implementation strategy of subfiling feature in HDF5, provide examples of using the feature, and evaluate and tune parallel I/O performance of this feature with parallel file systems of the Cray XC40 system at NERSC (Cori) that include a burst buffer storage and a Lustre disk-based storage. We also evaluate I/O performance on the Cray XC30 system, Edison, at NERSC. Our results show performance benefits of 1.2X to 6X performance advantage with subfiling compared to writing a single shared HDF5 file. We present our exploration of configurations, such as the number of subfiles and the number of Lustre storage targets to storing files, as optimization parameters to obtain superior I/O performance. Based on this exploration, we discuss recommendations for achieving good I/O performance as well as limitations with using the subfiling feature.

  3. Secure File Allocation and Caching in Large-scale Distributed Systems

    DEFF Research Database (Denmark)

    Di Mauro, Alessio; Mei, Alessandro; Jajodia, Sushil

    2012-01-01

    In this paper, we present a file allocation and caching scheme that guarantees high assurance, availability, and load balancing in a large-scale distributed file system that can support dynamic updates of authorization policies. The scheme uses fragmentation and replication to store files with hi......-balancing, and reducing delay of read operations. The system offers a trade-off-between performance and security that is dynamically tunable according to the current level of threat. We validate our mechanisms with extensive simulations in an Internet-like network.......In this paper, we present a file allocation and caching scheme that guarantees high assurance, availability, and load balancing in a large-scale distributed file system that can support dynamic updates of authorization policies. The scheme uses fragmentation and replication to store files with high...... security requirements in a system composed of a majority of low-security servers. We develop mechanisms to fragment files, to allocate them into multiple servers, and to cache them as close as possible to their readers while preserving the security requirement of the files, providing load...

  4. 76 FR 61956 - Electronic Tariff Filing System (ETFS)

    Science.gov (United States)

    2011-10-06

    ...] Electronic Tariff Filing System (ETFS) AGENCY: Federal Communications Commission. ACTION: Final rule... with the Commission's Electronic Tariff Filing System (ETFS), Report and Order (Order). This notice is...: Pamela Arluk, Pricing Policy Division, Wireline Competition Bureau, at (202) 418-1520, or email: pamela...

  5. Reliable file sharing in distributed operating system using web RTC

    Science.gov (United States)

    Dukiya, Rajesh

    2017-12-01

    Since, the evolution of distributed operating system, distributed file system is come out to be important part in operating system. P2P is a reliable way in Distributed Operating System for file sharing. It was introduced in 1999, later it became a high research interest topic. Peer to Peer network is a type of network, where peers share network workload and other load related tasks. A P2P network can be a period of time connection, where a bunch of computers connected by a USB (Universal Serial Bus) port to transfer or enable disk sharing i.e. file sharing. Currently P2P requires special network that should be designed in P2P way. Nowadays, there is a big influence of browsers in our life. In this project we are going to study of file sharing mechanism in distributed operating system in web browsers, where we will try to find performance bottlenecks which our research will going to be an improvement in file sharing by performance and scalability in distributed file systems. Additionally, we will discuss the scope of Web Torrent file sharing and free-riding in peer to peer networks.

  6. Study and development of a document file system with selective access

    International Nuclear Information System (INIS)

    Mathieu, Jean-Claude

    1974-01-01

    The objective of this research thesis was to design and to develop a set of software aimed at an efficient management of a document file system by using methods of selective access to information. Thus, the three main aspects of file processing (creation, modification, reorganisation) have been addressed. The author first presents the main problems related to the development of a comprehensive automatic documentation system, and their conventional solutions. Some future aspects, notably dealing with the development of peripheral computer technology, are also evoked. He presents the characteristics of INIS bibliographic records provided by the IAEA which have been used to create the files. In the second part, he briefly describes the file system general organisation. This system is based on the use of two main files: an inverse file which contains for each descriptor a list of of numbers of files indexed by this descriptor, and a dictionary of descriptor or input file which gives access to the inverse file. The organisation of these both files is then describes in a detailed way. Other related or associated files are created, and the overall architecture and mechanisms integrated into the file data input software are described, as well as various processing applied to these different files. Performance and possible development are finally discussed

  7. Experiments towards model-based testing using Plan 9: Labelled transition file systems, stacking file systems, on-the-fly coverage measuring

    NARCIS (Netherlands)

    Belinfante, Axel; Guardiola, G.; Soriano, E.; Ballesteros, F.J.

    2006-01-01

    We report on experiments that we did on Plan 9/Inferno to gain more experience with the file-system-as-tool-interface approach. We reimplemented functionality that we earlier worked on in Unix, trying to use Plan 9 file system interfaces. The application domain for those experiments was model-based

  8. EFFICIENCY ANALYSIS OF HASHING METHODS FOR FILE SYSTEMS IN USER MODE

    Directory of Open Access Journals (Sweden)

    E. Y. Ivanov

    2013-05-01

    Full Text Available The article deals with characteristics and performance of interaction protocols between virtual file system and file system, their influence on processing power of microkernel operating systems. User mode implementation of ext2 file system for MINIX 3 OS is used to show that in microkernel operating systems file object identification time might increase up to 26 times in comparison with monolithic systems. Therefore, we present efficiency analysis of various hashing methods for file systems, running in user mode. Studies have shown that using hashing methods recommended in this paper it is possible to achieve competitive performance of the considered component of I/O stacks in microkernel and monolithic operating systems.

  9. NASA work unit system file maintenance manual

    Science.gov (United States)

    1972-01-01

    The NASA Work Unit System is a management information system for research tasks (i.e., work units) performed under NASA grants and contracts. It supplies profiles on research efforts and statistics on fund distribution. The file maintenance operator can add, delete and change records at a remote terminal or can submit punched cards to the computer room for batch update. The system is designed for file maintenance by a person with little or no knowledge of data processing techniques.

  10. File-System Workload on a Scientific Multiprocessor

    Science.gov (United States)

    Kotz, David; Nieuwejaar, Nils

    1995-01-01

    Many scientific applications have intense computational and I/O requirements. Although multiprocessors have permitted astounding increases in computational performance, the formidable I/O needs of these applications cannot be met by current multiprocessors a their I/O subsystems. To prevent I/O subsystems from forever bottlenecking multiprocessors and limiting the range of feasible applications, new I/O subsystems must be designed. The successful design of computer systems (both hardware and software) depends on a thorough understanding of their intended use. A system designer optimizes the policies and mechanisms for the cases expected to most common in the user's workload. In the case of multiprocessor file systems, however, designers have been forced to build file systems based only on speculation about how they would be used, extrapolating from file-system characterizations of general-purpose workloads on uniprocessor and distributed systems or scientific workloads on vector supercomputers (see sidebar on related work). To help these system designers, in June 1993 we began the Charisma Project, so named because the project sought to characterize 1/0 in scientific multiprocessor applications from a variety of production parallel computing platforms and sites. The Charisma project is unique in recording individual read and write requests-in live, multiprogramming, parallel workloads (rather than from selected or nonparallel applications). In this article, we present the first results from the project: a characterization of the file-system workload an iPSC/860 multiprocessor running production, parallel scientific applications at NASA's Ames Research Center.

  11. Storm: A Manager for Storage Resource in Grid

    International Nuclear Information System (INIS)

    Ghiselli, A.; Magnoni, L.; Zappi, R.

    2009-01-01

    Nowadays, data intensive applications demand high-performance and large-storage systems capable of serving up to various Peta bytes of storage space. Therefore, common solutions adopted in data centres include Storage Area Networks (San) and cluster parallel file systems, such as GPFS from IBM and Lustre from Sun Microsystems. In order to make these storage system solutions available in modern Data Grid architectures, standard interfaces are needed. The Grid Storage Resource Manager (SRM) interface is one of these standard interfaces. Grid storage services implementing the SRM standard provide common capabilities and advanced functionality such as dynamic space allocation and file management on shared storage systems. In this paper, we describe Storm (Storage Resource Manager). Storm is a flexible and high-performing implementation of the standard SRM interface version 2.2. The software architecture of Storm allows for an easy integration to different underlying storage systems via a plug-in mechanism. In particular, Storm takes advantage from storage systems based on cluster file systems. Currently, Storm is installed and used in production in various data centres, including the WLCG Italian Tier-1. In addition, Economics and Financial communities, as represented by the EGRID Project, adopt Storm in production as well.

  12. Development of EDFSRS: evaluated data files storage and retrieval system

    International Nuclear Information System (INIS)

    Hasegawa, Akira

    1985-07-01

    EDFSRS: Evaluated Data Files Storage and Retrieval System has been developed, which is a complete service system for the evaluated nuclear data files compiled in the major three formats: ENDF/B, UKNDL and KEDAK. This system intends to give efficient loading and maintenance of evaluated nuclear data files to the data base administrators and efficient retrievals to their users not only with the easiness but with the best confidence. It can give users all of the information available in these major three formats. The system consists of more than fifteen independent programs and some 150 Mega byte data files and index files (data-base) of the loaded data. In addition it is designed to be operated in the on-line TSS (Time Sharing System) mode, so that users can get any information from their desk top terminals. This report is prepared as a reference manual of the EDFSRS. (author)

  13. Remote file inquiry (RFI) system

    Science.gov (United States)

    1975-01-01

    System interrogates and maintains user-definable data files from remote terminals, using English-like, free-form query language easily learned by persons not proficient in computer programming. System operates in asynchronous mode, allowing any number of inquiries within limitation of available core to be active concurrently.

  14. Digital Libraries: The Next Generation in File System Technology.

    Science.gov (United States)

    Bowman, Mic; Camargo, Bill

    1998-01-01

    Examines file sharing within corporations that use wide-area, distributed file systems. Applications and user interactions strongly suggest that the addition of services typically associated with digital libraries (content-based file location, strongly typed objects, representation of complex relationships between documents, and extrinsic…

  15. Overview and Status of the Ceph File System

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    The Ceph file system (CephFS) is the POSIX-compatible distributed file system running on top of Ceph's powerful and stable object store. This presentation will give a general introduction of CephFS and detail the recent work the Ceph team has done to improve its stability and usability. In particular, we will cover directory fragmentation, multiple active metadata servers, and directory subtree pinning to metadata servers, features slated for stability in the imminent Luminous release. This talk will also give an overview of how we are measuring performance of multiple active metadata servers using large on-demand cloud deployments. The results will highlight how CephFS distributes metadata load across metadata servers to achieve scaling. About the speaker Patrick Donnelly is a software engineer at Red Hat, Inc. currently working on the Ceph distributed file system. In 2016 he completed his Ph.D. in computer science at the University of Notre Dame with a dissertation on the topic of file transfer management...

  16. 76 FR 70651 - Fee for Filing a Patent Application Other Than by the Electronic Filing System

    Science.gov (United States)

    2011-11-15

    ... government; or (3) preempt tribal law. Therefore, a tribal summary impact statement is not required under... 0651-AC64 Fee for Filing a Patent Application Other Than by the Electronic Filing System AGENCY: United..., that is not filed by electronic means as prescribed by the Director of the United States Patent and...

  17. File System Virtual Appliances

    Science.gov (United States)

    2010-05-01

    4 KB of data is read or written, data is copied back and forth using trampoline buffers — pages that are shared during proxy initialization — because...in 2008. CIO Magazine. 104 · File system virtual appliances [64] Megiddo, N. and Modha, D. S. 2003. ARC: A Self-Tuning, Low Over- head Replacement

  18. AliEnFS - a Linux File System for the AliEn Grid Services

    OpenAIRE

    Peters, Andreas J.; Saiz, P.; Buncic, P.

    2003-01-01

    Among the services offered by the AliEn (ALICE Environment http://alien.cern.ch) Grid framework there is a virtual file catalogue to allow transparent access to distributed data-sets using various file transfer protocols. $alienfs$ (AliEn File System) integrates the AliEn file catalogue as a new file system type into the Linux kernel using LUFS, a hybrid user space file system framework (Open Source http://lufs.sourceforge.net). LUFS uses a special kernel interface level called VFS (Virtual F...

  19. The Future of the Andrew File System

    CERN Multimedia

    CERN. Geneva; Altman, Jeffrey

    2011-01-01

    The talk will discuss the ten operational capabilities that have made AFS unique in the distributed file system space and how these capabilities are being expanded upon to meet the needs of the 21st century. Derrick Brashear and Jeffrey Altman will present a technical road map of new features and technical innovations that are under development by the OpenAFS community and Your File System, Inc. funded by a U.S. Department of Energy Small Business Innovative Research grant. The talk will end with a comparison of AFS to its modern days competitors.

  20. Configuration Management File Manager Developed for Numerical Propulsion System Simulation

    Science.gov (United States)

    Follen, Gregory J.

    1997-01-01

    One of the objectives of the High Performance Computing and Communication Project's (HPCCP) Numerical Propulsion System Simulation (NPSS) is to provide a common and consistent way to manage applications, data, and engine simulations. The NPSS Configuration Management (CM) File Manager integrated with the Common Desktop Environment (CDE) window management system provides a common look and feel for the configuration management of data, applications, and engine simulations for U.S. engine companies. In addition, CM File Manager provides tools to manage a simulation. Features include managing input files, output files, textual notes, and any other material normally associated with simulation. The CM File Manager includes a generic configuration management Application Program Interface (API) that can be adapted for the configuration management repositories of any U.S. engine company.

  1. Storing files in a parallel computing system based on user-specified parser function

    Science.gov (United States)

    Faibish, Sorin; Bent, John M; Tzelnic, Percy; Grider, Gary; Manzanares, Adam; Torres, Aaron

    2014-10-21

    Techniques are provided for storing files in a parallel computing system based on a user-specified parser function. A plurality of files generated by a distributed application in a parallel computing system are stored by obtaining a parser from the distributed application for processing the plurality of files prior to storage; and storing one or more of the plurality of files in one or more storage nodes of the parallel computing system based on the processing by the parser. The plurality of files comprise one or more of a plurality of complete files and a plurality of sub-files. The parser can optionally store only those files that satisfy one or more semantic requirements of the parser. The parser can also extract metadata from one or more of the files and the extracted metadata can be stored with one or more of the plurality of files and used for searching for files.

  2. LHCB: Non-POSIX File System for the LHCB Online Event Handling

    CERN Multimedia

    Garnier, J-C; Cherukuwada, S S

    2010-01-01

    LHCb aims to use its O(20000) CPU cores in the High Level Trigger (HLT) and its 120 TB Online storage system for data reprocessing during LHC shutdown periods. These periods can last between a few days and several weeks during the winter shutdown or even only a few hours during beam interfill gaps. These jobs run on files which are staged in from tape storage to the local storage buffer. The result are again one or more files. Efficient file writing and reading is essential for the performance of the system. Rather than using a traditional shared filesystem such as NFS or CIFS we have implemented a custom, light-weight, non-Posix file-system for the handling of these files. Streaming this filesystem for the data-access allows to obtain high performance, while at the same time keep the resource consumption low and add nice features not found in NFS such as high-availability, transparent failover of the read and write service. The writing part of this file-system is in successful use for the Online, real-time w...

  3. NCPC Central Files Information System (CFIS)

    Data.gov (United States)

    National Capital Planning Commission — This dataset contains records from NCPC's Central Files Information System (CFIS), which is a comprehensive database of projects submitted to NCPC for design review...

  4. Development of data file system for cardiovascular nuclear medicine

    International Nuclear Information System (INIS)

    Hayashida, Kohei; Nishimura, Tsunehiko; Uehara, Toshiisa; Nisawa, Yoshifumi.

    1985-01-01

    A computer-assisted filing system for storing and processing data from cardiac pool scintigraphy and myocardial scintigraphy has been developed. Individual patient data are stored with his (her) identification number (ID) into floppy discs successively in order of receiving scintigraphy. Data for 900 patients can be stored per floppy disc. Scintigraphic findings can be outputted in a uniform file format, and can be used as a reporting format. Output or retrieval of filed individual patient data is possible according to each examination, disease code or ID. This system seems to be used for prospective study in patients with cardiovascular diseases. (Namekawa, K.)

  5. Construction of the radiation oncology teaching files system for charged particle radiotherapy.

    Science.gov (United States)

    Masami, Mukai; Yutaka, Ando; Yasuo, Okuda; Naoto, Takahashi; Yoshihisa, Yoda; Hiroshi, Tsuji; Tadashi, Kamada

    2013-01-01

    Our hospital started the charged particle therapy since 1996. New institutions for charged particle therapy are planned in the world. Our hospital are accepting many visitors from those newly planned medical institutions and having many opportunities to provide with the training to them. Based upon our experiences, we have developed the radiation oncology teaching files system for charged particle therapy. We adopted the PowerPoint of Microsoft as a basic framework of our teaching files system. By using our export function of the viewer any physician can create teaching files easily and effectively. Now our teaching file system has 33 cases for clinical and physics contents. We expect that we can improve the safety and accuracy of charged particle therapy by using our teaching files system substantially.

  6. Screw-in forces during instrumentation by various file systems.

    Science.gov (United States)

    Ha, Jung-Hong; Kwak, Sang Won; Kim, Sung-Kyo; Kim, Hyeon-Cheol

    2016-11-01

    The purpose of this study was to compare the maximum screw-in forces generated during the movement of various Nickel-Titanium (NiTi) file systems. Forty simulated canals in resin blocks were randomly divided into 4 groups for the following instruments: Mtwo size 25/0.07 (MTW, VDW GmbH), Reciproc R25 (RPR, VDW GmbH), ProTaper Universal F2 (PTU, Dentsply Maillefer), and ProTaper Next X2 (PTN, Dentsply Maillefer, n = 10). All the artificial canals were prepared to obtain a standardized lumen by using ProTaper Universal F1. Screw-in forces were measured using a custom-made experimental device (AEndoS- k , DMJ system) during instrumentation with each NiTi file system using the designated movement. The rotation speed was set at 350 rpm with an automatic 4 mm pecking motion at a speed of 1 mm/sec. The pecking depth was increased by 1 mm for each pecking motion until the file reach the working length. Forces were recorded during file movement, and the maximum force was extracted from the data. Maximum screw-in forces were analyzed by one-way ANOVA and Tukey's post hoc comparison at a significance level of 95%. Reciproc and ProTaper Universal files generated the highest maximum screw-in forces among all the instruments while M-two and ProTaper Next showed the lowest ( p files with smaller cross-sectional area for higher flexibility is recommended.

  7. Distributed Data Management and Distributed File Systems

    CERN Document Server

    Girone, Maria

    2015-01-01

    The LHC program has been successful in part due to the globally distributed computing resources used for collecting, serving, processing, and analyzing the large LHC datasets. The introduction of distributed computing early in the LHC program spawned the development of new technologies and techniques to synchronize information and data between physically separated computing centers. Two of the most challenges services are the distributed file systems and the distributed data management systems. In this paper I will discuss how we have evolved from local site services to more globally independent services in the areas of distributed file systems and data management and how these capabilities may continue to evolve into the future. I will address the design choices, the motivations, and the future evolution of the computing systems used for High Energy Physics.

  8. [PVFS 2000: An operational parallel file system for Beowulf

    Science.gov (United States)

    Ligon, Walt

    2004-01-01

    The approach has been to develop Parallel Virtual File System version 2 (PVFS2) , retaining the basic philosophy of the original file system but completely rewriting the code. It shows the architecture of the server and client components. BMI - BMI is the network abstraction layer. It is designed with a common driver and modules for each protocol supported. The interface is non-blocking, and provides mechanisms for optimizations including pinning user buffers. Currently TCP/IP and GM(Myrinet) modules have been implemented. Trove -Trove is the storage abstraction layer. It provides for storing both data spaces and name/value pairs. Trove can also be implemented using different underlying storage mechanisms including native files, raw disk partitions, SQL and other databases. The current implementation uses native files for data spaces and Berkeley db for name/value pairs.

  9. A technique for integrating remote minicomputers into a general computer's file system

    CERN Document Server

    Russell, R D

    1976-01-01

    This paper describes a simple technique for interfacing remote minicomputers used for real-time data acquisition into the file system of a central computer. Developed as part of the ORION system at CERN, this 'File Manager' subsystem enables a program in the minicomputer to access and manipulate files of any type as if they resided on a storage device attached to the minicomputer. Yet, completely transparent to the program, the files are accessed from disks on the central system via high-speed data links, with response times comparable to local storage devices. (6 refs).

  10. Lessons Learned in Deploying the World s Largest Scale Lustre File System

    Energy Technology Data Exchange (ETDEWEB)

    Dillow, David A [ORNL; Fuller, Douglas [ORNL; Wang, Feiyi [ORNL; Oral, H Sarp [ORNL; Zhang, Zhe [ORNL; Hill, Jason J [ORNL; Shipman, Galen M [ORNL

    2010-01-01

    The Spider system at the Oak Ridge National Laboratory's Leadership Computing Facility (OLCF) is the world's largest scale Lustre parallel file system. Envisioned as a shared parallel file system capable of delivering both the bandwidth and capacity requirements of the OLCF's diverse computational environment, the project had a number of ambitious goals. To support the workloads of the OLCF's diverse computational platforms, the aggregate performance and storage capacity of Spider exceed that of our previously deployed systems by a factor of 6x - 240 GB/sec, and 17x - 10 Petabytes, respectively. Furthermore, Spider supports over 26,000 clients concurrently accessing the file system, which exceeds our previously deployed systems by nearly 4x. In addition to these scalability challenges, moving to a center-wide shared file system required dramatically improved resiliency and fault-tolerance mechanisms. This paper details our efforts in designing, deploying, and operating Spider. Through a phased approach of research and development, prototyping, deployment, and transition to operations, this work has resulted in a number of insights into large-scale parallel file system architectures, from both the design and the operational perspectives. We present in this paper our solutions to issues such as network congestion, performance baselining and evaluation, file system journaling overheads, and high availability in a system with tens of thousands of components. We also discuss areas of continued challenges, such as stressed metadata performance and the need for file system quality of service alongside with our efforts to address them. Finally, operational aspects of managing a system of this scale are discussed along with real-world data and observations.

  11. Parallel file system with metadata distributed across partitioned key-value store c

    Science.gov (United States)

    Bent, John M.; Faibish, Sorin; Grider, Gary; Torres, Aaron

    2017-09-19

    Improved techniques are provided for storing metadata associated with a plurality of sub-files associated with a single shared file in a parallel file system. The shared file is generated by a plurality of applications executing on a plurality of compute nodes. A compute node implements a Parallel Log Structured File System (PLFS) library to store at least one portion of the shared file generated by an application executing on the compute node and metadata for the at least one portion of the shared file on one or more object storage servers. The compute node is also configured to implement a partitioned data store for storing a partition of the metadata for the shared file, wherein the partitioned data store communicates with partitioned data stores on other compute nodes using a message passing interface. The partitioned data store can be implemented, for example, using Multidimensional Data Hashing Indexing Middleware (MDHIM).

  12. Stochastic Petri net analysis of a replicated file system

    Science.gov (United States)

    Bechta Dugan, Joanne; Ciardo, Gianfranco

    1989-01-01

    A stochastic Petri-net model of a replicated file system is presented for a distributed environment where replicated files reside on different hosts and a voting algorithm is used to maintain consistency. Witnesses, which simply record the status of the file but contain no data, can be used in addition to or in place of files to reduce overhead. A model sufficiently detailed to include file status (current or out-of-date), as well as failure and repair of hosts where copies or witnesses reside, is presented. The number of copies and witnesses is a parameter of the model. Two different majority protocols are examined, one where a majority of all copies and witnesses is necessary to form a quorum, and the other where only a majority of the copies and witnesses on operational hosts is needed. The latter, known as adaptive voting, is shown to increase file availability in most cases.

  13. A History of the Andrew File System

    CERN Multimedia

    CERN. Geneva; Altman, Jeffrey

    2011-01-01

    Derrick Brashear and Jeffrey Altman will present a technical history of the evolution of Andrew File System starting with the early days of the Andrew Project at Carnegie Mellon through the commercialization by Transarc Corporation and IBM and a decade of OpenAFS. The talk will be technical with a focus on the various decisions and implementation trade-offs that were made over the course of AFS versions 1 through 4, the development of the Distributed Computing Environment Distributed File System (DCE DFS), and the course of the OpenAFS development community. The speakers will also discuss the various AFS branches developed at the University of Michigan, Massachusetts Institute of Technology and Carnegie Mellon University.

  14. Generalized File Management System or Proto-DBMS?

    Science.gov (United States)

    Braniff, Tom

    1979-01-01

    The use of a data base management system (DBMS) as opposed to traditional data processing is discussed. The generalized file concept is viewed as an entry level step to the DBMS. The transition process from one system to the other is detailed. (SF)

  15. Evaluation of canal transportation after preparation with Reciproc single-file systems with or without glide path files.

    Science.gov (United States)

    Aydin, Ugur; Karataslioglu, Emrah

    2017-01-01

    Canal transportation is a common sequel caused by rotary instruments. The purpose of the present study is to evaluate the degree of transportation after the use of Reciproc single-file instruments with or without glide path files. Thirty resin blocks with L-shaped canals were divided into three groups ( n = 10). Group 1 - canals were prepared with Reciproc-25 file. Group 2 - glide path file-G1 was used before Reciproc. Group 3 - glide path files-G1 and G2 were used before Reciproc. Pre- and post-instrumentation images were superimposed under microscope, and resin removed from the inner and outer surfaces of the root canal was calculated throughout 10 points. Statistical analysis was performed with Kruskal-Wallis test and post hoc Dunn test. For coronal and middle one-thirds, there was no significant difference among groups ( P > 0.05). For apical section, transportation of Group 1 was significantly higher than other groups ( P files before Reciproc single-file system reduced the degree of apical canal transportation.

  16. 78 FR 63159 - Amendment to Certification of Nebraska's Central Filing System

    Science.gov (United States)

    2013-10-23

    ..., Raspberries, Rye, Seed crops, Sheep & Lambs, Silage, Sorghum Grain, Soybeans, Squash, Strawberries, Sugar....usda.gov ). Farm products covered by a State's central filing system are also identified through the GIPSA Web site. The Nebraska central filing system covers specified farm products. We originally...

  17. Apical extrusion of debris during the preparation of oval root canals: a comparative study between a full-sequence SAF system and a rotary file system supplemented by XP-endo finisher file.

    Science.gov (United States)

    Kfir, Anda; Moza-Levi, Rotem; Herteanu, Moran; Weissman, Amir; Wigler, Ronald

    2018-03-01

    The purpose of this study was to assess the amount of apically extruded debris during the preparation of oval canals with either a rotary file system supplemented by the XP-endo Finisher file or a full-sequence self-adjusting file (SAF) system. Sixty mandibular incisors were randomly assigned to two groups: group A: stage 1-glide path preparation with Pre-SAF instruments. Stage 2-cleaning and shaping with SAF. Group B: stage 1-glide path preparation with ProGlider file. Stage 2-cleaning and shaping with ProTaper Next system. Stage 3-Final cleaning with XP-endo Finisher file. The debris extruded during each of the stages was collected, and the debris weights were compared between the groups and between the stages within the groups using t tests with a significance level set at P file followed by XP-endo Finisher file extruded significantly more debris than a full-sequence SAF system. Each stage, in either procedure, had its own contribution to the extrusion of debris. Final preparation with XP-endo Finisher file contributes to the total amount of extruded debris, but the clinical relevance of the relative difference in the amount of apically extruded debris remains unclear.

  18. Beyond a Terabyte File System

    Science.gov (United States)

    Powers, Alan K.

    1994-01-01

    The Numerical Aerodynamics Simulation Facility's (NAS) CRAY C916/1024 accesses a "virtual" on-line file system, which is expanding beyond a terabyte of information. This paper will present some options to fine tuning Data Migration Facility (DMF) to stretch the online disk capacity and explore the transitions to newer devices (STK 4490, ER90, RAID).

  19. Branch file system for nonconventional literature from the nuclear field

    International Nuclear Information System (INIS)

    Dvorakova, K.

    1982-01-01

    The branch filing system collects research and study reports, translations, trip reports, literature searches and information on scientific and technical events in Czechoslovakia. The method is described of filing, processing and use of the materials. (M.D.)

  20. 5 CFR 293.504 - Composition of, and access to, the Employee Medical File System.

    Science.gov (United States)

    2010-01-01

    ... Employee Medical File System. 293.504 Section 293.504 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERSONNEL RECORDS Employee Medical File System Records § 293.504 Composition of, and access to, the Employee Medical File System. (a) All employee occupational medical records...

  1. Evolutionary Game Theory-Based Evaluation of P2P File-Sharing Systems in Heterogeneous Environments

    Directory of Open Access Journals (Sweden)

    Yusuke Matsuda

    2010-01-01

    Full Text Available Peer-to-Peer (P2P file sharing is one of key technologies for achieving attractive P2P multimedia social networking. In P2P file-sharing systems, file availability is improved by cooperative users who cache and share files. Note that file caching carries costs such as storage consumption and processing load. In addition, users have different degrees of cooperativity in file caching and they are in different surrounding environments arising from the topological structure of P2P networks. With evolutionary game theory, this paper evaluates the performance of P2P file sharing systems in such heterogeneous environments. Using micro-macro dynamics, we analyze the impact of the heterogeneity of user selfishness on the file availability and system stability. Further, through simulation experiments with agent-based dynamics, we reveal how other aspects, for example, synchronization among nodes and topological structure, affect the system performance. Both analytical and simulation results show that the environmental heterogeneity contributes to the file availability and system stability.

  2. Electronic Document Management Using Inverted Files System

    Science.gov (United States)

    Suhartono, Derwin; Setiawan, Erwin; Irwanto, Djon

    2014-03-01

    The amount of documents increases so fast. Those documents exist not only in a paper based but also in an electronic based. It can be seen from the data sample taken by the SpringerLink publisher in 2010, which showed an increase in the number of digital document collections from 2003 to mid of 2010. Then, how to manage them well becomes an important need. This paper describes a new method in managing documents called as inverted files system. Related with the electronic based document, the inverted files system will closely used in term of its usage to document so that it can be searched over the Internet using the Search Engine. It can improve document search mechanism and document save mechanism.

  3. Electronic Document Management Using Inverted Files System

    Directory of Open Access Journals (Sweden)

    Suhartono Derwin

    2014-03-01

    Full Text Available The amount of documents increases so fast. Those documents exist not only in a paper based but also in an electronic based. It can be seen from the data sample taken by the SpringerLink publisher in 2010, which showed an increase in the number of digital document collections from 2003 to mid of 2010. Then, how to manage them well becomes an important need. This paper describes a new method in managing documents called as inverted files system. Related with the electronic based document, the inverted files system will closely used in term of its usage to document so that it can be searched over the Internet using the Search Engine. It can improve document search mechanism and document save mechanism.

  4. 29 CFR 4902.11 - Specific exemptions: Office of Inspector General Investigative File System.

    Science.gov (United States)

    2010-07-01

    ... Investigative File System. 4902.11 Section 4902.11 Labor Regulations Relating to Labor (Continued) PENSION... General Investigative File System. (a) Criminal Law Enforcement. (1) Exemption. Under the authority... Inspector General Investigative File System—PBGC” from the provisions of 5 U.S.C. 552a (c)(3), (c)(4), (d)(1...

  5. Maintaining a Distributed File System by Collection and Analysis of Metrics

    Science.gov (United States)

    Bromberg, Daniel

    1997-01-01

    AFS(originally, Andrew File System) is a widely-deployed distributed file system product used by companies, universities, and laboratories world-wide. However, it is not trivial to operate: runing an AFS cell is a formidable task. It requires a team of dedicated and experienced system administratores who must manage a user base numbring in the thousands, rather than the smaller range of 10 to 500 faced by the typical system administrator.

  6. The global unified parallel file system (GUPFS) project: FY 2002 activities and results

    Energy Technology Data Exchange (ETDEWEB)

    Butler, Gregory F.; Lee, Rei Chi; Welcome, Michael L.

    2003-04-07

    The Global Unified Parallel File System (GUPFS) project is a multiple-phase, five-year project at the National Energy Research Scientific Computing (NERSC) Center to provide a scalable, high performance, high bandwidth, shared file system for all the NERSC production computing and support systems. The primary purpose of the GUPFS project is to make it easier to conduct advanced scientific research using the NERSC systems. This is to be accomplished through the use of a shared file system providing a unified file namespace, operating on consolidated shared storage that is directly accessed by all the NERSC production computing and support systems. During its first year, FY 2002, the GUPFS project focused on identifying, testing, and evaluating existing and emerging shared/cluster file system, SAN fabric, and storage technologies; identifying NERSC user input/output (I/O) requirements, methods, and mechanisms; and developing appropriate benchmarking methodologies and benchmark codes for a parallel environment. This report presents the activities and progress of the GUPFS project during its first year, the results of the evaluations conducted, and plans for near-term and longer-term investigations.

  7. NASIS data base management system: IBM 360 TSS implementation. Volume 6: NASIS message file

    Science.gov (United States)

    1973-01-01

    The message file for the NASA Aerospace Safety Information System (NASIS) is discussed. The message file contains all the message and term explanations for the system. The data contained in the file can be broken down into three separate sections: (1) global terms, (2) local terms, and (3) system messages. The various terms are defined and their use within the system is explained.

  8. The self-adjusting file (SAF) system: An evidence-based update.

    Science.gov (United States)

    Metzger, Zvi

    2014-09-01

    Current rotary file systems are effective tools. Nevertheless, they have two main shortcomings: They are unable to effectively clean and shape oval canals and depend too much on the irrigant to do the cleaning, which is an unrealistic illusionThey may jeopardize the long-term survival of the tooth via unnecessary, excessive removal of sound dentin and creation of micro-cracks in the remaining root dentin. The new Self-adjusting File (SAF) technology uses a hollow, compressible NiTi file, with no central metal core, through which a continuous flow of irrigant is provided throughout the procedure. The SAF technology allows for effective cleaning of all root canals including oval canals, thus allowing for the effective disinfection and obturation of all canal morphologies. This technology uses a new concept of cleaning and shaping in which a uniform layer of dentin is removed from around the entire perimeter of the root canal, thus avoiding unnecessary excessive removal of sound dentin. Furthermore, the mode of action used by this file system does not apply the machining of all root canals to a circular bore, as do all other rotary file systems, and does not cause micro-cracks in the remaining root dentin. The new SAF technology allows for a new concept in cleaning and shaping root canals: Minimally Invasive 3D Endodontics.

  9. The self-adjusting file (SAF) system: An evidence-based update

    Science.gov (United States)

    Metzger, Zvi

    2014-01-01

    Current rotary file systems are effective tools. Nevertheless, they have two main shortcomings: They are unable to effectively clean and shape oval canals and depend too much on the irrigant to do the cleaning, which is an unrealistic illusionThey may jeopardize the long-term survival of the tooth via unnecessary, excessive removal of sound dentin and creation of micro-cracks in the remaining root dentin. The new Self-adjusting File (SAF) technology uses a hollow, compressible NiTi file, with no central metal core, through which a continuous flow of irrigant is provided throughout the procedure. The SAF technology allows for effective cleaning of all root canals including oval canals, thus allowing for the effective disinfection and obturation of all canal morphologies. This technology uses a new concept of cleaning and shaping in which a uniform layer of dentin is removed from around the entire perimeter of the root canal, thus avoiding unnecessary excessive removal of sound dentin. Furthermore, the mode of action used by this file system does not apply the machining of all root canals to a circular bore, as do all other rotary file systems, and does not cause micro-cracks in the remaining root dentin. The new SAF technology allows for a new concept in cleaning and shaping root canals: Minimally Invasive 3D Endodontics. PMID:25298639

  10. NASA ARCH- A FILE ARCHIVAL SYSTEM FOR THE DEC VAX

    Science.gov (United States)

    Scott, P. J.

    1994-01-01

    The function of the NASA ARCH system is to provide a permanent storage area for files that are infrequently accessed. The NASA ARCH routines were designed to provide a simple mechanism by which users can easily store and retrieve files. The user treats NASA ARCH as the interface to a black box where files are stored. There are only five NASA ARCH user commands, even though NASA ARCH employs standard VMS directives and the VAX BACKUP utility. Special care is taken to provide the security needed to insure file integrity over a period of years. The archived files may exist in any of three storage areas: a temporary buffer, the main buffer, and a magnetic tape library. When the main buffer fills up, it is transferred to permanent magnetic tape storage and deleted from disk. Files may be restored from any of the three storage areas. A single file, multiple files, or entire directories can be stored and retrieved. archived entities hold the same name, extension, version number, and VMS file protection scheme as they had in the user's account prior to archival. NASA ARCH is capable of handling up to 7 directory levels. Wildcards are supported. User commands include TEMPCOPY, DISKCOPY, DELETE, RESTORE, and DIRECTORY. The DIRECTORY command searches a directory of savesets covering all three archival areas, listing matches according to area, date, filename, or other criteria supplied by the user. The system manager commands include 1) ARCHIVE- to transfer the main buffer to duplicate magnetic tapes, 2) REPORTto determine when the main buffer is full enough to archive, 3) INCREMENT- to back up the partially filled main buffer, and 4) FULLBACKUP- to back up the entire main buffer. On-line help files are provided for all NASA ARCH commands. NASA ARCH is written in DEC VAX DCL for interactive execution and has been implemented on a DEC VAX computer operating under VMS 4.X. This program was developed in 1985.

  11. Storage resources management at the INFN-CNAF Tier-1

    International Nuclear Information System (INIS)

    Ricci, P.P.; Lo Re, G.; Vagnoni, V.

    2006-01-01

    At present we have 2 main mass storage systems for archiving HEP experimental data at the INFN-CNAF Tier-1: a HSM software system (CASTOR) and about 250 TB of different storage devices over SAN. This paper briefly describes our hardware and software environment, and summarizes the technical solutions adopted in order to obtain better availability and high data throughput from the front-end disk servers. In fact, our computing resources, consisting of farms of dual processor nodes (currently about 1000 nodes providing 1300 KspecInt2000), need to access the data through a fast and reliable I/O infrastructure. A valid solution for achieving large I/O throughputs is nowadays provided by parallel file systems. In the last part of this paper some results of detailed tests we performed with GPFS and Lustre over SAN are reported

  12. PHOBINS: an index file of photon production cross section data and its utility code system

    International Nuclear Information System (INIS)

    Hasegawa, Akira; Koyama, Kinji; Ido, Masaru; Hotta, Masakazu; Miyasaka, Shun-ichi

    1978-08-01

    The code System PHOBINS developed for reference of photon production cross sections is described in detail. The system is intended to grasp the present status of photon production data and present the information of available data. It consists of four utility routines, CREA, UP-DT, REF and BACK, and data files. These utility routines are used for making an index file of the photon production cross sections, updating the index file, searching the index file and producing a back-up file of the index file. In the index file of the photon production cross sections, a data base system is employed for efficient data management in economical storage, ease of updating and efficient reference. The present report is a reference manual of PHOBINS. (author)

  13. Shaping ability of 4 different single-file systems in simulated S-shaped canals.

    Science.gov (United States)

    Saleh, Abdulrahman Mohammed; Vakili Gilani, Pouyan; Tavanafar, Saeid; Schäfer, Edgar

    2015-04-01

    The aim of this study was to compare the shaping ability of 4 different single-file systems in simulated S-shaped canals. Sixty-four S-shaped canals in resin blocks were prepared to an apical size of 25 using Reciproc (VDW, Munich, Germany), WaveOne (Dentsply Maillefer, Ballaigues, Switzerland), OneShape (Micro Méga, Besançon, France), and F360 (Komet Brasseler, Lemgo, Germany) (n = 16 canals/group) systems. Composite images were made from the superimposition of pre- and postinstrumentation images. The amount of resin removed by each system was measured by using a digital template and image analysis software. Canal aberrations and the preparation time were also recorded. The data were statistically analyzed by using analysis of variance, Tukey, and chi-square tests. Canals prepared with the F360 and OneShape systems were better centered compared with the Reciproc and WaveOne systems. Reciproc and WaveOne files removed significantly greater amounts of resin from the inner side of both curvatures (P files was significantly faster compared with WaveOne and F360 files (P file instruments were safe to use and were able to prepare the canals efficiently. However, single-file systems that are less tapered seem to be more favorable when preparing S-shaped canals. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  14. The European Southern Observatory-MIDAS table file system

    Science.gov (United States)

    Peron, M.; Grosbol, P.

    1992-01-01

    The new and substantially upgraded version of the Table File System in MIDAS is presented as a scientific database system. MIDAS applications for performing database operations on tables are discussed, for instance, the exchange of the data to and from the TFS, the selection of objects, the uncertainty joins across tables, and the graphical representation of data. This upgraded version of the TFS is a full implementation of the binary table extension of the FITS format; in addition, it also supports arrays of strings. Different storage strategies for optimal access of very large data sets are implemented and are addressed in detail. As a simple relational database, the TFS may be used for the management of personal data files. This opens the way to intelligent pipeline processing of large amounts of data. One of the key features of the Table File System is to provide also an extensive set of tools for the analysis of the final results of a reduction process. Column operations using standard and special mathematical functions as well as statistical distributions can be carried out; commands for linear regression and model fitting using nonlinear least square methods and user-defined functions are available. Finally, statistical tests of hypothesis and multivariate methods can also operate on tables.

  15. Methods and apparatus for multi-resolution replication of files in a parallel computing system using semantic information

    Science.gov (United States)

    Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Grider, Gary; Torres, Aaron

    2015-10-20

    Techniques are provided for storing files in a parallel computing system using different resolutions. A method is provided for storing at least one file generated by a distributed application in a parallel computing system. The file comprises one or more of a complete file and a sub-file. The method comprises the steps of obtaining semantic information related to the file; generating a plurality of replicas of the file with different resolutions based on the semantic information; and storing the file and the plurality of replicas of the file in one or more storage nodes of the parallel computing system. The different resolutions comprise, for example, a variable number of bits and/or a different sub-set of data elements from the file. A plurality of the sub-files can be merged to reproduce the file.

  16. Temperature increases on the external root surface during endodontic treatment using single file systems.

    Science.gov (United States)

    Özkocak, I; Taşkan, M M; Gökt Rk, H; Aytac, F; Karaarslan, E Şirin

    2015-01-01

    The aim of this study is to evaluate increases in temperature on the external root surface during endodontic treatment with different rotary systems. Fifty human mandibular incisors with a single root canal were selected. All root canals were instrumented using a size 20 Hedstrom file, and the canals were irrigated with 5% sodium hypochlorite solution. The samples were randomly divided into the following three groups of 15 teeth: Group 1: The OneShape Endodontic File no.: 25; Group 2: The Reciproc Endodontic File no.: 25; Group 3: The WaveOne Endodontic File no.: 25. During the preparation, the temperature changes were measured in the middle third of the roots using a noncontact infrared thermometer. The temperature data were transferred from the thermometer to the computer and were observed graphically. Statistical analysis was performed using the Kruskal-Wallis analysis of variance at a significance level of 0.05. The increases in temperature caused by the OneShape file system were lower than those of the other files (P file showed the highest temperature increases. However, there were no significant differences between the Reciproc and WaveOne files. The single file rotary systems used in this study may be recommended for clinical use.

  17. NASIS data base management system - IBM 360/370 OS MVT implementation. 6: NASIS message file

    Science.gov (United States)

    1973-01-01

    The message file for the NASA Aerospace Safety Information System (NASIS) is discussed. The message file contains all the message and term explanations for the system. The data contained in the file can be broken down into three separate sections: (1) global terms, (2) local terms, and (3) system messages. The various terms are defined and their use within the system is explained.

  18. Assessment of apically extruded debris produced by the self-adjusting file system.

    Science.gov (United States)

    De-Deus, Gustavo André; Nogueira Leal Silva, Emmanuel João; Moreira, Edson Jorge; de Almeida Neves, Aline; Belladonna, Felipe Gonçalves; Tameirão, Michele

    2014-04-01

    This study was designed to quantitatively evaluate the amount of apically extruded debris by the Self-Adjusting-File system (SAF; ReDent-Nova, Ra'anana, Israel). Hand and rotary instruments were used as references for comparison. Sixty mesial roots of mandibular molars were randomly assigned to 3 groups (n = 20). The root canals were instrumented with hand files using a crown-down technique. The ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) and SAF systems were used according to the manufacturers' instructions. Sodium hypochlorite was used as an irrigant, and the apically extruded debris was collected in preweighted glass vials and dried afterward. The mean weight of debris was assessed with a microbalance and statistically analyzed using 1-way analysis of variance and the post hoc Tukey multiple comparison test. Hand file instrumentation produced significantly more debris compared with the ProTaper and SAF systems (P system produced significantly more debris compared with the SAF system (P systems caused apical debris extrusion. SAF instrumentation was associated with less debris extrusion compared with the use of hand and rotary files. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  19. Study and development of a document file system with selective access; Etude et realisation d'un systeme de fichiers documentaires a acces selectif

    Energy Technology Data Exchange (ETDEWEB)

    Mathieu, Jean-Claude

    1974-06-21

    The objective of this research thesis was to design and to develop a set of software aimed at an efficient management of a document file system by using methods of selective access to information. Thus, the three main aspects of file processing (creation, modification, reorganisation) have been addressed. The author first presents the main problems related to the development of a comprehensive automatic documentation system, and their conventional solutions. Some future aspects, notably dealing with the development of peripheral computer technology, are also evoked. He presents the characteristics of INIS bibliographic records provided by the IAEA which have been used to create the files. In the second part, he briefly describes the file system general organisation. This system is based on the use of two main files: an inverse file which contains for each descriptor a list of of numbers of files indexed by this descriptor, and a dictionary of descriptor or input file which gives access to the inverse file. The organisation of these both files is then describes in a detailed way. Other related or associated files are created, and the overall architecture and mechanisms integrated into the file data input software are described, as well as various processing applied to these different files. Performance and possible development are finally discussed.

  20. The global unified parallel file system (GUPFS) project: FY 2003 activities and results

    Energy Technology Data Exchange (ETDEWEB)

    Butler, Gregory F.; Baird William P.; Lee, Rei C.; Tull, Craig E.; Welcome, Michael L.; Whitney Cary L.

    2004-04-30

    The Global Unified Parallel File System (GUPFS) project is a multiple-phase project at the National Energy Research Scientific Computing (NERSC) Center whose goal is to provide a scalable, high-performance, high-bandwidth, shared file system for all of the NERSC production computing and support systems. The primary purpose of the GUPFS project is to make the scientific users more productive as they conduct advanced scientific research at NERSC by simplifying the scientists' data management tasks and maximizing storage and data availability. This is to be accomplished through the use of a shared file system providing a unified file namespace, operating on consolidated shared storage that is accessible by all the NERSC production computing and support systems. In order to successfully deploy a scalable high-performance shared file system with consolidated disk storage, three major emerging technologies must be brought together: (1) shared/cluster file systems software, (2) cost-effective, high-performance storage area network (SAN) fabrics, and (3) high-performance storage devices. Although they are evolving rapidly, these emerging technologies individually are not targeted towards the needs of scientific high-performance computing (HPC). The GUPFS project is in the process of assessing these emerging technologies to determine the best combination of solutions for a center-wide shared file system, to encourage the development of these technologies in directions needed for HPC, particularly at NERSC, and to then put them into service. With the development of an evaluation methodology and benchmark suites, and with the updating of the GUPFS testbed system, the project did a substantial number of investigations and evaluations during FY 2003. The investigations and evaluations involved many vendors and products. From our evaluation of these products, we have found that most vendors and many of the products are more focused on the commercial market. Most vendors

  1. Nickel-Titanium Single-file System in Endodontics.

    Science.gov (United States)

    Dagna, Alberto

    2015-10-01

    This work describes clinical cases treated with a innovative single-use and single-file nickel-titanium (NiTi) system used in continuous rotation. Nickel-titanium files are commonly used for root canal treatment but they tend to break because of bending stresses and torsional stresses. Today new instruments used only for one treatment have been introduced. They help the clinician to make the root canal shaping easier and safer because they do not require sterilization and after use have to be discarded. A new sterile instrument is used for each treatment in order to reduce the possibility of fracture inside the canal. The new One Shape NiTi single-file instrument belongs to this group. One Shape is used for complete shaping of root canal after an adequate preflaring. Its protocol is simple and some clinical cases are presented. It is helpful for easy cases and reliable for difficult canals. After 2 years of clinical practice, One Shape seems to be helpful for the treatment of most of the root canals, with low risk of separation. After each treatment, the instrument is discarded and not sterilized in autoclave or re-used. This single-use file simplifies the endodontic therapy, because only one instrument is required for canal shaping of many cases. The respect of clinical protocol guarantees predictable good results.

  2. SLIB77, Source Library Data Compression and File Maintenance System

    International Nuclear Information System (INIS)

    Lunsford, A.

    1989-01-01

    Description of program or function: SLIB77 is a source librarian program designed to maintain FORTRAN source code in a compressed form on magnetic disk. The program was prepared to meet program maintenance requirements for ongoing program development and continual improvement of very large programs involving many programmers from a number of different organizations. SLIB77 automatically maintains in one file the source of the current program as well as all previous modifications. Although written originally for FORTRAN programs, SLIB77 is suitable for use with data files, text files, operating systems, and other programming languages, such as Ada, C and COBOL. It can handle libraries with records of up to 160-characters. Records are grouped into DECKS and assigned deck names by the user. SLIB77 assigns a number to each record in each DECK. Records can be deleted or restored singly or as a group within each deck. Modification records are grouped and assigned modification identification names by the user. The program assigns numbers to each new record within the deck. The program has two modes of execution, BATCH and EDIT. The BATCH mode is controlled by an input file and is used to make changes permanent and create new library files. The EDIT mode is controlled by interactive terminal input and a built-in line editor is used for modification of single decks. Transferring of a library from one computer system to another is accomplished using a Portable Library File created by SLIB77 in a BATCH run

  3. Prefetching in file systems for MIMD multiprocessors

    Science.gov (United States)

    Kotz, David F.; Ellis, Carla Schlatter

    1990-01-01

    The question of whether prefetching blocks on the file into the block cache can effectively reduce overall execution time of a parallel computation, even under favorable assumptions, is considered. Experiments have been conducted with an interleaved file system testbed on the Butterfly Plus multiprocessor. Results of these experiments suggest that (1) the hit ratio, the accepted measure in traditional caching studies, may not be an adequate measure of performance when the workload consists of parallel computations and parallel file access patterns, (2) caching with prefetching can significantly improve the hit ratio and the average time to perform an I/O (input/output) operation, and (3) an improvement in overall execution time has been observed in most cases. In spite of these gains, prefetching sometimes results in increased execution times (a negative result, given the optimistic nature of the study). The authors explore why it is not trivial to translate savings on individual I/O requests into consistently better overall performance and identify the key problems that need to be addressed in order to improve the potential of prefetching techniques in the environment.

  4. DJFS: Providing Highly Reliable and High‐Performance File System with Small‐Sized

    Directory of Open Access Journals (Sweden)

    Junghoon Kim

    2017-11-01

    Full Text Available File systems and applications try to implement their own update protocols to guarantee data consistency, which is one of the most crucial aspects of computing systems. However, we found that the storage devices are substantially under‐utilized when preserving data consistency because they generate massive storage write traffic with many disk cache flush operations and force‐unit‐access (FUA commands. In this paper, we present DJFS (Delta‐Journaling File System that provides both a high level of performance and data consistency for different applications. We made three technical contributions to achieve our goal. First, to remove all storage accesses with disk cache flush operations and FUA commands, DJFS uses small‐sized NVRAM for a file system journal. Second, to reduce the access latency and space requirements of NVRAM, DJFS attempts to journal compress the differences in the modified blocks. Finally, to relieve explicit checkpointing overhead, DJFS aggressively reflects the checkpoint transactions to file system area in the unit of the specified region. Our evaluation on TPC‐C SQLite benchmark shows that, using our novel optimization schemes, DJFS outperforms Ext4 by up to 64.2 times with only 128 MB of NVRAM.

  5. Digital Stratigraphy: Contextual Analysis of File System Traces in Forensic Science.

    Science.gov (United States)

    Casey, Eoghan

    2017-12-28

    This work introduces novel methods for conducting forensic analysis of file allocation traces, collectively called digital stratigraphy. These in-depth forensic analysis methods can provide insight into the origin, composition, distribution, and time frame of strata within storage media. Using case examples and empirical studies, this paper illuminates the successes, challenges, and limitations of digital stratigraphy. This study also shows how understanding file allocation methods can provide insight into concealment activities and how real-world computer usage can complicate digital stratigraphy. Furthermore, this work explains how forensic analysts have misinterpreted traces of normal file system behavior as indications of concealment activities. This work raises awareness of the value of taking the overall context into account when analyzing file system traces. This work calls for further research in this area and for forensic tools to provide necessary information for such contextual analysis, such as highlighting mass deletion, mass copying, and potential backdating. © 2017 American Academy of Forensic Sciences.

  6. Cross-system log file analysis for hypothesis testing

    NARCIS (Netherlands)

    Glahn, Christian

    2008-01-01

    Glahn, C. (2008). Cross-system log file analysis for hypothesis testing. Presented at Empowering Learners for Lifelong Competence Development: pedagogical, organisational and technological issues. 4th TENCompetence Open Workshop. April, 10, 2008, Madrid, Spain.

  7. Cooperative storage of shared files in a parallel computing system with dynamic block size

    Science.gov (United States)

    Bent, John M.; Faibish, Sorin; Grider, Gary

    2015-11-10

    Improved techniques are provided for parallel writing of data to a shared object in a parallel computing system. A method is provided for storing data generated by a plurality of parallel processes to a shared object in a parallel computing system. The method is performed by at least one of the processes and comprises: dynamically determining a block size for storing the data; exchanging a determined amount of the data with at least one additional process to achieve a block of the data having the dynamically determined block size; and writing the block of the data having the dynamically determined block size to a file system. The determined block size comprises, e.g., a total amount of the data to be stored divided by the number of parallel processes. The file system comprises, for example, a log structured virtual parallel file system, such as a Parallel Log-Structured File System (PLFS).

  8. 29 CFR 1602.43 - Commission's remedy for school systems' or districts' failure to file report.

    Science.gov (United States)

    2010-07-01

    ...' failure to file report. Any school system or district failing or refusing to file report EEO-5 when... 29 Labor 4 2010-07-01 2010-07-01 false Commission's remedy for school systems' or districts' failure to file report. 1602.43 Section 1602.43 Labor Regulations Relating to Labor (Continued) EQUAL...

  9. An information retrieval system for research file data

    Science.gov (United States)

    Joan E. Lengel; John W. Koning

    1978-01-01

    Research file data have been successfully retrieved at the Forest Products Laboratory through a high-speed cross-referencing system involving the computer program FAMULUS as modified by the Madison Academic Computing Center at the University of Wisconsin. The method of data input, transfer to computer storage, system utilization, and effectiveness are discussed....

  10. Methods and apparatus for capture and storage of semantic information with sub-files in a parallel computing system

    Science.gov (United States)

    Faibish, Sorin; Bent, John M; Tzelnic, Percy; Grider, Gary; Torres, Aaron

    2015-02-03

    Techniques are provided for storing files in a parallel computing system using sub-files with semantically meaningful boundaries. A method is provided for storing at least one file generated by a distributed application in a parallel computing system. The file comprises one or more of a complete file and a plurality of sub-files. The method comprises the steps of obtaining a user specification of semantic information related to the file; providing the semantic information as a data structure description to a data formatting library write function; and storing the semantic information related to the file with one or more of the sub-files in one or more storage nodes of the parallel computing system. The semantic information provides a description of data in the file. The sub-files can be replicated based on semantically meaningful boundaries.

  11. An in vitro study: Evaluation of intracanal calcium hydroxide removal with different file systems

    Directory of Open Access Journals (Sweden)

    Atul Jain

    2017-01-01

    Full Text Available Background: Calcium hydroxide (Ca(OH2 is the most commonly used intracanal material; it needs to be removed in entirety before obturation. Several techniques have been used for the same including use of various hand and rotary files. Aim: This study was carried out to compare the efficacy of Hand K files and single and multiple rotary file system in removal of Ca(OH2. Methodology: Distobuccal root of 45 maxillary molars were selected on the basis of specified inclusion and exclusion criteria. They were divided into three groups - Group 1 (H and K file, Group 2 (HERO Shaper, and Group 3 (One Shape. Biomechanical preparation (BMP was carried out as per the manufacturer's instructions; 2.5% sodium hypochlorite was used as the irrigant and 17% ethylenediaminetetraacetic acid as the penultimate irrigant. Ca(OH2powder was mixed with normal saline to obtain a paste; canals were filled with this paste using a Lentulo spiral and were sealed. After 7 days, Ca(OH2was removed, using the same file system as that used for BMP. Samples were sectioned longitudinally and evaluated under a stereomicroscope. Statistical Analysis: Statistical analysis of the obtained data was carried out using one-way analysis of variance test. Results: HERO Shaper displayed better removal of Ca(OH2than One Shape and Hand K file. Moreover, removal was better in the middle third of canal than apical third. Conclusion: Multiple rotary file system (HERO Shaper is more effective in removal of Ca(OH2than the single file system (One Shape

  12. The Fifth Workshop on HPC Best Practices: File Systems and Archives

    Energy Technology Data Exchange (ETDEWEB)

    Hick, Jason; Hules, John; Uselton, Andrew

    2011-11-30

    The workshop on High Performance Computing (HPC) Best Practices on File Systems and Archives was the fifth in a series sponsored jointly by the Department Of Energy (DOE) Office of Science and DOE National Nuclear Security Administration. The workshop gathered technical and management experts for operations of HPC file systems and archives from around the world. Attendees identified and discussed best practices in use at their facilities, and documented findings for the DOE and HPC community in this report.

  13. Developing a File System Structure to Solve Healthy Big Data Storage and Archiving Problems Using a Distributed File System

    Directory of Open Access Journals (Sweden)

    Atilla Ergüzen

    2018-06-01

    Full Text Available Recently, the use of internet has become widespread, increasing the use of mobile phones, tablets, computers, Internet of Things (IoT devices and other digital sources. In the health sector with the help of new generation digital medical equipment, this digital world also has tended to grow in an unpredictable way in that it has nearly 10% of the global wide data itself and continues to keep grow beyond what the other sectors have. This progress has greatly enlarged the amount of produced data which cannot be resolved with conventional methods. In this work, an efficient model for the storage of medical images using a distributed file system structure has been developed. With this work, a robust, available, scalable, and serverless solution structure has been produced, especially for storing large amounts of data in the medical field. Furthermore, the security level of the system is extreme by use of static Internet protocol (IP, user credentials, and synchronously encrypted file contents. One of the most important key features of the system is high performance and easy scalability. In this way, the system can work with fewer hardware elements and be more robust than others that use name node architecture. According to the test results, it is seen that the performance of the designed system is better than 97% from a Not Only Structured Query Language (NoSQL system, 80% from a relational database management system (RDBMS, and 74% from an operating system (OS.

  14. Unbinding Transition of Probes in Single-File Systems

    Science.gov (United States)

    Bénichou, Olivier; Démery, Vincent; Poncet, Alexis

    2018-02-01

    Single-file transport, arising in quasi-one-dimensional geometries where particles cannot pass each other, is characterized by the anomalous dynamics of a probe, notably its response to an external force. In these systems, the motion of several probes submitted to different external forces, although relevant to mixtures of charged and neutral or active and passive objects, remains unexplored. Here, we determine how several probes respond to external forces. We rely on a hydrodynamic description of the symmetric exclusion process to obtain exact analytical results at long times. We show that the probes can either move as a whole, or separate into two groups moving away from each other. In between the two regimes, they separate with a different dynamical exponent, as t1 /4. This unbinding transition also occurs in several continuous single-file systems and is expected to be observable.

  15. GOVERNMENTAL FINANCIAL REPORTS: BETWEEN VARIETY AND INTEGRATION

    Directory of Open Access Journals (Sweden)

    Andrei R. CRIŞAN

    2014-06-01

    Full Text Available Governments in general provide two main types of financial information: Government Finance Statistics (GFS, used for macroeconomic analysis and General Purpose Financial Reports (GPFR, more or less according with International Public Sector Accounting Standards, used for making decisions in the public sector entities. The aim of this paper is to make a comparison between GFS and GPFR to extract the similarities and differences between them. The documents of GFS and GPFS will be compared row by row, relieving the common and the different components. Our proposal is to create a unique informational system which generates both GFS and GPFS. This system could bring significant benefits such as saving time or reducing costs.

  16. Ex Vivo Comparison of Mtwo and RaCe Rotary File Systems in Root Canal Deviation: One File Only versus the Conventional Method.

    Science.gov (United States)

    Aminsobhani, Mohsen; Razmi, Hasan; Nozari, Solmaz

    2015-07-01

    Cleaning and shaping of the root canal system is an important step in endodontic therapy. New instruments incorporate new preparation techniques that can improve the efficacy of cleaning and shaping. The aim of this study was to compare the efficacy of Mtwo and RaCe rotary file systems in straightening the canal curvature using only one file or the conventional method. Sixty mesial roots of extracted human mandibular molars were prepared by RaCe and Mtwo nickel-titanium (NiTi) rotary files using the conventional and only one rotary file methods. The working length was 18 mm and the curvatures of the root canals were between 15-45°. By superimposing x-ray images before and after the instrumentation, deviation of the canals was assessed using Adobe Photoshop CS3 software. Preparation time was recorded. Data were analyzed using three-way ANOVA and Tukey's post hoc test. There were no significant differences between RaCe and Mtwo or between the two root canal preparation methods in root canal deviation in buccolingual and mesiodistal radiographs (P>0.05). Changes of root canal curvature in >35° subgroups were significantly more than in other subgroups with smaller canal curvatures. Preparation time was shorter in one file only technique. According to the results, the two rotary systems and the two root canal preparation methods had equal efficacy in straightening the canals; but the preparation time was shorter in one file only group.

  17. Motivators, Barriers and Concerns in Adoption of Electronic Filing System: Survey Evidence from Malaysian Professional Accountants

    OpenAIRE

    Ming-Ling Lai; Kwai-Fatt Choong

    2010-01-01

    Problem statement: Worldwide, electronic filing (e-filing) system and its' adoption has attracted much attention, however, scholarly study on accounting professionals' acceptance of e-filing system is scant. Approach: This study aimed (i) to examine factors that motivated professional accountants to use e-filing (ii) to solicit their usage experience and (iii) to assess the barriers to adoption and other compliance considerations. The questionnaire survey was administered on 700 professionals...

  18. ATLAS, an integrated structural analysis and design system. Volume 4: Random access file catalog

    Science.gov (United States)

    Gray, F. P., Jr. (Editor)

    1979-01-01

    A complete catalog is presented for the random access files used by the ATLAS integrated structural analysis and design system. ATLAS consists of several technical computation modules which output data matrices to corresponding random access file. A description of the matrices written on these files is contained herein.

  19. The image database management system of teaching file using personal computer

    International Nuclear Information System (INIS)

    Shin, M. J.; Kim, G. W.; Chun, T. J.; Ahn, W. H.; Baik, S. K.; Choi, H. Y.; Kim, B. G.

    1995-01-01

    For the systemic management and easy using of teaching file in radiology department, the authors tried to do the setup of a database management system of teaching file using personal computer. We used a personal computer (IBM PC compatible, 486DX2) including a image capture card(Window vision, Dooin Elect, Seoul, Korea) and video camera recorder (8mm, CCD-TR105, Sony, Tokyo, Japan) for the acquisition and storage of images. We developed the database program by using Foxpro for Window 2.6(Microsoft, Seattle, USA) executed in the Window 3.1 (Microsoft, Seattle, USA). Each datum consisted of hospital number, name, sex, age, examination date, keyword, radiologic examination modalities, final diagnosis, radiologic findings, references and representative images. The images were acquired and stored as bitmap format (8 bitmap, 540 X 390 ∼ 545 X 414, 256 gray scale) and displayed on the 17 inch-flat monitor(1024 X 768, Samtron, Seoul, Korea). Without special devices, the images acquisition and storage could be done on the reading viewbox, simply. The image quality on the computer's monitor was less than the one of original film on the viewbox, but generally the characteristics of each lesions could be differentiated. Easy retrieval of data was possible for the purpose of teaching file system. Without high cost appliances, we could consummate the image database system of teaching file using personal computer with relatively inexpensive method

  20. Quantitative evaluation of apically extruded debris with different single-file systems: Reciproc, F360 and OneShape versus Mtwo.

    Science.gov (United States)

    Bürklein, S; Benten, S; Schäfer, E

    2014-05-01

    To assess in a laboratory setting the amount of apically extruded debris associated with different single-file nickel-titanium instrumentation systems compared to one multiple-file rotary system. Eighty human mandibular central incisors were randomly assigned to four groups (n = 20 teeth per group). The root canals were instrumented according to the manufacturers' instructions using the reciprocating single-file system Reciproc, the single-file rotary systems F360 and OneShape and the multiple-file rotary Mtwo instruments. The apically extruded debris was collected and dried in pre-weighed glass vials. The amount of debris was assessed with a micro balance and statistically analysed using anova and post hoc Student-Newman-Keuls test. The time required to prepare the canals with the different instruments was also recorded. Reciproc produced significantly more debris compared to all other systems (P file rotary systems and the multiple-file rotary system (P > 0.05). Instrumentation with the three single-file systems was significantly faster than with Mtwo (P systems caused apical debris extrusion. Rotary instrumentation was associated with less debris extrusion compared to reciprocal instrumentation. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  1. Extending the POSIX I/O interface: a parallel file system perspective.

    Energy Technology Data Exchange (ETDEWEB)

    Vilayannur, M.; Lang, S.; Ross, R.; Klundt, R.; Ward, L.; Mathematics and Computer Science; VMWare, Inc.; SNL

    2008-12-11

    The POSIX interface does not lend itself well to enabling good performance for high-end applications. Extensions are needed in the POSIX I/O interface so that high-concurrency HPC applications running on top of parallel file systems perform well. This paper presents the rationale, design, and evaluation of a reference implementation of a subset of the POSIX I/O interfaces on a widely used parallel file system (PVFS) on clusters. Experimental results on a set of micro-benchmarks confirm that the extensions to the POSIX interface greatly improve scalability and performance.

  2. MARIANE: MApReduce Implementation Adapted for HPC Environments

    Energy Technology Data Exchange (ETDEWEB)

    Fadika, Zacharia; Dede, Elif; Govindaraju, Madhusudhan; Ramakrishnan, Lavanya

    2011-07-06

    MapReduce is increasingly becoming a popular framework, and a potent programming model. The most popular open source implementation of MapReduce, Hadoop, is based on the Hadoop Distributed File System (HDFS). However, as HDFS is not POSIX compliant, it cannot be fully leveraged by applications running on a majority of existing HPC environments such as Teragrid and NERSC. These HPC environments typicallysupport globally shared file systems such as NFS and GPFS. On such resourceful HPC infrastructures, the use of Hadoop not only creates compatibility issues, but also affects overall performance due to the added overhead of the HDFS. This paper not only presents a MapReduce implementation directly suitable for HPC environments, but also exposes the design choices for better performance gains in those settings. By leveraging inherent distributed file systems' functions, and abstracting them away from its MapReduce framework, MARIANE (MApReduce Implementation Adapted for HPC Environments) not only allows for the use of the model in an expanding number of HPCenvironments, but also allows for better performance in such settings. This paper shows the applicability and high performance of the MapReduce paradigm through MARIANE, an implementation designed for clustered and shared-disk file systems and as such not dedicated to a specific MapReduce solution. The paper identifies the components and trade-offs necessary for this model, and quantifies the performance gains exhibited by our approach in distributed environments over Apache Hadoop in a data intensive setting, on the Magellan testbed at the National Energy Research Scientific Computing Center (NERSC).

  3. Automatic generation of configuration files for a distributed control system

    CERN Document Server

    Cupérus, J

    1995-01-01

    The CERN PS accelerator complex is composed of 9 interlinked accelerators for production and acceleration of various kinds of particles. The hardware is controlled through CAMAC, VME, G64, and GPIB modules, which in turn are controlled by more than 100 microprocessors in VME crates. To produce startup files for all these microprocessors, with the correct drivers, programs and parameters in each of them, is quite a challenge. The problem is solved by generating the startup files automatically from the description of the control system in a relational database. The generation process detects inconsistencies and incomplete information. Included in the startup files are data which are formally comments, but can be interpreted for run-time checking of interface modules and program activity.

  4. Comparison of canal transportation and centering ability of twisted files, Pathfile-ProTaper system, and stainless steel hand K-files by using computed tomography.

    Science.gov (United States)

    Gergi, Richard; Rjeily, Joe Abou; Sader, Joseph; Naaman, Alfred

    2010-05-01

    The purpose of this study was to compare canal transportation and centering ability of 2 rotary nickel-titanium (NiTi) systems (Twisted Files [TF] and Pathfile-ProTaper [PP]) with conventional stainless steel K-files. Ninety root canals with severe curvature and short radius were selected. Canals were divided randomly into 3 groups of 30 each. After preparation with TF, PP, and stainless steel files, the amount of transportation that occurred was assessed by using computed tomography. Three sections from apical, mid-root, and coronal levels of the canal were recorded. Amount of transportation and centering ability were assessed. The 3 groups were statistically compared with analysis of variance and Tukey honestly significant difference test. Less transportation and better centering ability occurred with TF rotary instruments (P < .0001). K-files showed the highest transportation followed by PP system. PP system showed significant transportation when compared with TF (P < .0001). The TF system was found to be the best for all variables measured in this study. Copyright (c) 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  5. Cross-system log file analysis for hypothesis testing

    NARCIS (Netherlands)

    Glahn, Christian; Specht, Marcus; Schoonenboom, Judith; Sligte, Henk; Moghnieh, Ayman; Hernández-Leo, Davinia; Stefanov, Krassen; Lemmers, Ruud; Koper, Rob

    2008-01-01

    Glahn, C., Specht, M., Schoonenboom, J., Sligte, H., Moghnieh, A., Hernández-Leo, D. Stefanov, K., Lemmers, R., & Koper, R. (2008). Cross-system log file analysis for hypothesis testing. In H. Sligte & R. Koper (Eds.), Proceedings of the 4th TENCompetence Open Workshop. Empowering Learners for

  6. Evaluation of the incidence of microcracks caused by Mtwo and ProTaper Next rotary file systems versus the self-adjusting file: A scanning electron microscopic study.

    Science.gov (United States)

    Saha, Suparna Ganguly; Vijaywargiya, Neelam; Saxena, Divya; Saha, Mainak Kanti; Bharadwaj, Anuj; Dubey, Sandeep

    2017-01-01

    To evaluate the incidence of microcrack formation canal preparation with two rotary nickel-titanium systems Mtwo and ProTaper Next along with the self-adjusting file system. One hundred and twenty mandibular premolar teeth were selected. Standardized access cavities were prepared and the canals were manually prepared up to size 20 after coronal preflaring. The teeth were divided into three experimental groups and one control group ( n = 30). Group 1: The canals were prepared using Mtwo rotary files. Group 2: The canals were prepared with ProTaper Next files. Group 3: The canals were prepared with self-adjusting files. Group 4: The canals were unprepared and used as a control. The roots were sectioned horizontally 3, 6, and 9 mm from the apex and examined under a scanning electron microscope to check for the presence of microcracks. The Pearson's Chi-square test was applied. The highest incidence of microcracks were associated with the ProTaper Next group, 80% ( P = 0.00), followed by the Mtwo group, 70% ( P = 0.000), and the least number of microcracks was noted in the self-adjusting file group, 10% ( P = 0.068). No significant difference was found between the ProTaper Next and Mtwo groups ( P = 0.368) while a significant difference was observed between the ProTaper Next and self-adjusting file groups ( P = 0.000) as well as the Mtwo and self-adjusting file groups ( P = 0.000). All nickel-titanium rotary instrument systems were associated with microcracks. However, the self-adjusting file system had significantly fewer microcracks when compared with the Mtwo and ProTaper Next.

  7. The Grid Enabled Mass Storage System (GEMSS): the Storage and Data management system used at the INFN Tier1 at CNAF

    International Nuclear Information System (INIS)

    Ricci, Pier Paolo; Cavalli, Alessandro; Dell'Agnello, Luca; Gregori, Daniele; Prosperini, Andrea; Rinaldi, Lorenzo; Sapunenko, Vladimir; Bonacorsi, Daniele; Vagnoni, Vincenzo

    2012-01-01

    The storage system currently used in production at the INFN Tier1 at CNAF is the result of several years of case studies, software development and tests. This solution, called the Grid Enabled Mass Storage System (GEMSS), is based on a custom integration between a fast and reliable parallel filesystem (the IBM General Parallel File System, GPFS), with a complete integrated tape backend based on the Tivoli Storage Manager (TSM), which provides Hierarchical Storage Management (HSM) capabilities, and the Grid Storage Resource Manager (StoRM), providing access to grid users through a standard SRM interface. Since the start of the Large Hadron Collider (LHC) operation, all LHC experiments have been using GEMSS at CNAF for both disk data access and long-term archival on tape media. Moreover, during last year, GEMSS has become the standard solution for all other experiments hosted at CNAF, allowing the definitive consolidation of the data storage layer. Our choice has proved to be very successful during the last two years of production with continuous enhancements, accurate monitoring and effective customizations according to the end-user requests. In this paper a description of the system is reported, addressing recent developments and giving an overview of the administration and monitoring tools. We also discuss the solutions adopted in order to grant the maximum availability of the service and the latest optimization features within the data access process. Finally, we summarize the main results obtained during these last years of activity from the perspective of some of the end-users, showing the reliability and the high performances that can be achieved using GEMSS.

  8. Embedded system file transfer USB

    International Nuclear Information System (INIS)

    Jaoua, Mehdi

    2008-01-01

    The development of the communication series A emphasized new aspects of data exchange. The transfer of data, subject of my project of end of studies, consists in transferring from the files of a support of mass towards another via port USB. In first phase, I had like stain the realization of an embarked system allowing the communication between a key USB and final of communication such as a Pc. For this fact, I had to include/understand the operation of protocol USB and thus I could programmed a Peak to manage this communication. The second phase, will consist in extending this project towards a transmission de< donnees between two keys USB without intervention of a powerful machine equipped with an operating system pour rant to manage this transaction. (Author)

  9. Silvabase: A flexible data file management system

    Science.gov (United States)

    Lambing, Steven J.; Reynolds, Sandra J.

    1991-01-01

    The need for a more flexible and efficient data file management system for mission planning in the Mission Operations Laboratory (EO) at MSFC has spawned the development of Silvabase. Silvabase is a new data file structure based on a B+ tree data structure. This data organization allows for efficient forward and backward sequential reads, random searches, and appends to existing data. It also provides random insertions and deletions with reasonable efficiency, utilization of storage space well but not at the expense of speed, and performance of these functions on a large volume of data. Mission planners required that some data be keyed and manipulated in ways not found in a commercial product. Mission planning software is currently being converted to use Silvabase in the Spacelab and Space Station Mission Planning Systems. Silvabase runs on a Digital Equipment Corporation's popular VAX/VMS computers in VAX Fortran. Silvabase has unique features involving time histories and intervals such as in operations research. Because of its flexibility and unique capabilities, Silvabase could be used in almost any government or commercial application that requires efficient reads, searches, and appends in medium to large amounts of almost any kind of data.

  10. A convertor and user interface to import CAD files into worldtoolkit virtual reality systems

    Science.gov (United States)

    Wang, Peter Hor-Ching

    1996-01-01

    Virtual Reality (VR) is a rapidly developing human-to-computer interface technology. VR can be considered as a three-dimensional computer-generated Virtual World (VW) which can sense particular aspects of a user's behavior, allow the user to manipulate the objects interactively, and render the VW at real-time accordingly. The user is totally immersed in the virtual world and feel the sense of transforming into that VW. NASA/MSFC Computer Application Virtual Environments (CAVE) has been developing the space-related VR applications since 1990. The VR systems in CAVE lab are based on VPL RB2 system which consists of a VPL RB2 control tower, an LX eyephone, an Isotrak polhemus sensor, two Fastrak polhemus sensors, a folk of Bird sensor, and two VPL DG2 DataGloves. A dynamics animator called Body Electric from VPL is used as the control system to interface with all the input/output devices and to provide the network communications as well as VR programming environment. The RB2 Swivel 3D is used as the modelling program to construct the VW's. A severe limitation of the VPL VR system is the use of RB2 Swivel 3D, which restricts the files to a maximum of 1020 objects and doesn't have the advanced graphics texture mapping. The other limitation is that the VPL VR system is a turn-key system which does not provide the flexibility for user to add new sensors and C language interface. Recently, NASA/MSFC CAVE lab provides VR systems built on Sense8 WorldToolKit (WTK) which is a C library for creating VR development environments. WTK provides device drivers for most of the sensors and eyephones available on the VR market. WTK accepts several CAD file formats, such as Sense8 Neutral File Format, AutoCAD DXF and 3D Studio file format, Wave Front OBJ file format, VideoScape GEO file format, Intergraph EMS stereolithographics and CATIA Stereolithographics STL file formats. WTK functions are object-oriented in their naming convention, are grouped into classes, and provide easy C

  11. A Formal Approach to Exploiting Multi-Stage Attacks based on File-System Vulnerabilities of Web Applications (Extended Version)

    OpenAIRE

    De Meo, Federico; Viganò, Luca

    2017-01-01

    Web applications require access to the file-system for many different tasks. When analyzing the security of a web application, secu- rity analysts should thus consider the impact that file-system operations have on the security of the whole application. Moreover, the analysis should take into consideration how file-system vulnerabilities might in- teract with other vulnerabilities leading an attacker to breach into the web application. In this paper, we first propose a classification of file-...

  12. Design and application of remote file management system

    International Nuclear Information System (INIS)

    Zhu Haijun; Liu Dekang; Shen liren

    2006-01-01

    File transfer protocol can help users transfer files between computers on internet. FTP can not fulfill the needs of users in special occasions, so it needs programmer define file transfer protocol himself based on users. The method or realization and application for user-defined file transfer protocol is introduced. (authors)

  13. Virtual file system on NoSQL for processing high volumes of HL7 messages.

    Science.gov (United States)

    Kimura, Eizen; Ishihara, Ken

    2015-01-01

    The Standardized Structured Medical Information Exchange (SS-MIX) is intended to be the standard repository for HL7 messages that depend on a local file system. However, its scalability is limited. We implemented a virtual file system using NoSQL to incorporate modern computing technology into SS-MIX and allow the system to integrate local patient IDs from different healthcare systems into a universal system. We discuss its implementation using the database MongoDB and describe its performance in a case study.

  14. The incidence of root microcracks caused by 3 different single-file systems versus the ProTaper system.

    Science.gov (United States)

    Liu, Rui; Hou, Ben Xiang; Wesselink, Paul R; Wu, Min-Kai; Shemesh, Hagay

    2013-08-01

    The aim of this study was to compare the incidence of root cracks observed at the apical root surface and/or in the canal wall after canal instrumentation with 3 single-file systems and the ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland). One hundred mandibular incisors were selected. Twenty control teeth were coronally flared with Gates-Glidden drills (Dentsply Maillefer). No further preparation was made. The other 80 teeth were mounted in resin blocks with simulated periodontal ligaments, and the apex was exposed. They were divided into 4 experimental groups (n = 20); the root canals were first coronally flared with Gates-Glidden drills and then instrumented to the full working length with the ProTaper, OneShape (Micro-Mega, Besancon, France), Reciproc (VDW, Munich, Germany), or the Self-Adjusting File (ReDent-Nova, Ra'anana, Israel). The apical root surface and horizontal sections 2, 4, and 6 mm from the apex were observed under a microscope. The presence of cracks was noted. The chi-square test was performed to compare the appearance of cracked roots between the experimental groups. No cracks were found in the control teeth and teeth instrumented with the Self-Adjusting File. Cracks were found in 10 of 20 (50%), 7 of 20 (35%), and 1 of 20 (5%) teeth after canal instrumentation with the ProTaper, OneShape, and Reciproc files, respectively. The difference between the experimental groups was statistically significant (P File and Reciproc files caused less cracks than the ProTaper and OneShape files. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  15. Considering User's Access Pattern in Multimedia File Systems

    Science.gov (United States)

    Cho, KyoungWoon; Ryu, YeonSeung; Won, Youjip; Koh, Kern

    2002-12-01

    Legacy buffer cache management schemes for multimedia server are grounded at the assumption that the application sequentially accesses the multimedia file. However, user access pattern may not be sequential in some circumstances, for example, in distance learning application, where the user may exploit the VCR-like function(rewind and play) of the system and accesses the particular segments of video repeatedly in the middle of sequential playback. Such a looping reference can cause a significant performance degradation of interval-based caching algorithms. And thus an appropriate buffer cache management scheme is required in order to deliver desirable performance even under the workload that exhibits looping reference behavior. We propose Adaptive Buffer cache Management(ABM) scheme which intelligently adapts to the file access characteristics. For each opened file, ABM applies either the LRU replacement or the interval-based caching depending on the Looping Reference Indicator, which indicates that how strong temporally localized access pattern is. According to our experiment, ABM exhibits better buffer cache miss ratio than interval-based caching or LRU, especially when the workload exhibits not only sequential but also looping reference property.

  16. Privacy Act System of Records: EPA Personnel Emergency Contact Files, EPA-44

    Science.gov (United States)

    Learn about the EPA Personnel Emergency Contact Files System, including including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedure.

  17. Apically extruded debris with reciprocating single-file and full-sequence rotary instrumentation systems.

    Science.gov (United States)

    Bürklein, Sebastian; Schäfer, Edgar

    2012-06-01

    The purpose of this in vitro study was to assess the amount of apically extruded debris using rotary and reciprocating nickel-titanium instrumentation systems. Eighty human mandibular central incisors were randomly assigned to 4 groups (n = 20 teeth per group). The root canals were instrumented according to the manufacturers' instructions using the 2 reciprocating single-file systems Reciproc (VDW, Munich, Germany) and WaveOne (Dentsply Maillefer, Ballaigues, Switzerland) and the 2 full-sequence rotary Mtwo (VDW, Munich, Germany) and ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) instruments. Bidistilled water was used as irrigant. The apically extruded debris was collected in preweighted glass vials using the Myers and Montgomery method. After drying, the mean weight of debris was assessed with a microbalance and statistically analyzed using analysis of variance and the post hoc Student-Newman-Keuls test. The time required to prepare the canals with the different instruments was also recorded. The reciprocating files produced significantly more debris compared with both rotary systems (P rotary instruments (P > .05), the reciprocating single-file system Reciproc produced significantly more debris compared with all other instruments (P Instrumentation was significantly faster using Reciproc than with all other instrument (P rotary instrumentation was associated with less debris extrusion compared with the use of reciprocating single-file systems. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  18. Log-Less Metadata Management on Metadata Server for Parallel File Systems

    Directory of Open Access Journals (Sweden)

    Jianwei Liao

    2014-01-01

    Full Text Available This paper presents a novel metadata management mechanism on the metadata server (MDS for parallel and distributed file systems. In this technique, the client file system backs up the sent metadata requests, which have been handled by the metadata server, so that the MDS does not need to log metadata changes to nonvolatile storage for achieving highly available metadata service, as well as better performance improvement in metadata processing. As the client file system backs up certain sent metadata requests in its memory, the overhead for handling these backup requests is much smaller than that brought by the metadata server, while it adopts logging or journaling to yield highly available metadata service. The experimental results show that this newly proposed mechanism can significantly improve the speed of metadata processing and render a better I/O data throughput, in contrast to conventional metadata management schemes, that is, logging or journaling on MDS. Besides, a complete metadata recovery can be achieved by replaying the backup logs cached by all involved clients, when the metadata server has crashed or gone into nonoperational state exceptionally.

  19. Securing the AliEn File Catalogue - Enforcing authorization with accountable file operations

    International Nuclear Information System (INIS)

    Schreiner, Steffen; Banerjee, Subho Sankar; Betev, Latchezar; Carminati, Federico; Vladimirovna Datskova, Olga; Furano, Fabrizio; Grigoras, Alina; Grigoras, Costin; Mendez Lorenzo, Patricia; Peters, Andreas Joachim; Saiz, Pablo; Bagnasco, Stefano; Zhu Jianlin

    2011-01-01

    The AliEn Grid Services, as operated by the ALICE Collaboration in its global physics analysis grid framework, is based on a central File Catalogue together with a distributed set of storage systems and the possibility to register links to external data resources. This paper describes several identified vulnerabilities in the AliEn File Catalogue access protocol regarding fraud and unauthorized file alteration and presents a more secure and revised design: a new mechanism, called LFN Booking Table, is introduced in order to keep track of access authorization in the transient state of files entering or leaving the File Catalogue. Due to a simplification of the original Access Envelope mechanism for xrootd-protocol-based storage systems, fundamental computational improvements of the mechanism were achieved as well as an up to 50% reduction of the credential's size. By extending the access protocol with signed status messages from the underlying storage system, the File Catalogue receives trusted information about a file's size and checksum and the protocol is no longer dependent on client trust. Altogether, the revised design complies with atomic and consistent transactions and allows for accountable, authentic, and traceable file operations. This paper describes these changes as part and beyond the development of AliEn version 2.19.

  20. Text File Comparator

    Science.gov (United States)

    Kotler, R. S.

    1983-01-01

    File Comparator program IFCOMP, is text file comparator for IBM OS/VScompatable systems. IFCOMP accepts as input two text files and produces listing of differences in pseudo-update form. IFCOMP is very useful in monitoring changes made to software at the source code level.

  1. Implementing Journaling in a Linux Shared Disk File System

    Science.gov (United States)

    Preslan, Kenneth W.; Barry, Andrew; Brassow, Jonathan; Cattelan, Russell; Manthei, Adam; Nygaard, Erling; VanOort, Seth; Teigland, David; Tilstra, Mike; O'Keefe, Matthew; hide

    2000-01-01

    In computer systems today, speed and responsiveness is often determined by network and storage subsystem performance. Faster, more scalable networking interfaces like Fibre Channel and Gigabit Ethernet provide the scaffolding from which higher performance computer systems implementations may be constructed, but new thinking is required about how machines interact with network-enabled storage devices. In this paper we describe how we implemented journaling in the Global File System (GFS), a shared-disk, cluster file system for Linux. Our previous three papers on GFS at the Mass Storage Symposium discussed our first three GFS implementations, their performance, and the lessons learned. Our fourth paper describes, appropriately enough, the evolution of GFS version 3 to version 4, which supports journaling and recovery from client failures. In addition, GFS scalability tests extending to 8 machines accessing 8 4-disk enclosures were conducted: these tests showed good scaling. We describe the GFS cluster infrastructure, which is necessary for proper recovery from machine and disk failures in a collection of machines sharing disks using GFS. Finally, we discuss the suitability of Linux for handling the big data requirements of supercomputing centers.

  2. Using electronic document management systems to manage highway project files.

    Science.gov (United States)

    2011-12-12

    "WisDOTs Bureau of Technical Services is interested in learning about the practices of other state departments of : transportation in developing and implementing an electronic document management system to manage highway : project files"

  3. Performance of the engineering analysis and data system 2 common file system

    Science.gov (United States)

    Debrunner, Linda S.

    1993-01-01

    The Engineering Analysis and Data System (EADS) was used from April 1986 to July 1993 to support large scale scientific and engineering computation (e.g. computational fluid dynamics) at Marshall Space Flight Center. The need for an updated system resulted in a RFP in June 1991, after which a contract was awarded to Cray Grumman. EADS II was installed in February 1993, and by July 1993 most users were migrated. EADS II is a network of heterogeneous computer systems supporting scientific and engineering applications. The Common File System (CFS) is a key component of this system. The CFS provides a seamless, integrated environment to the users of EADS II including both disk and tape storage. UniTree software is used to implement this hierarchical storage management system. The performance of the CFS suffered during the early months of the production system. Several of the performance problems were traced to software bugs which have been corrected. Other problems were associated with hardware. However, the use of NFS in UniTree UCFM software limits the performance of the system. The performance issues related to the CFS have led to a need to develop a greater understanding of the CFS organization. This paper will first describe the EADS II with emphasis on the CFS. Then, a discussion of mass storage systems will be presented, and methods of measuring the performance of the Common File System will be outlined. Finally, areas for further study will be identified and conclusions will be drawn.

  4. Uncoupling File System Components for Bridging Legacy and Modern Storage Architectures

    Science.gov (United States)

    Golpayegani, N.; Halem, M.; Tilmes, C.; Prathapan, S.; Earp, D. N.; Ashkar, J. S.

    2016-12-01

    Long running Earth Science projects can span decades of architectural changes in both processing and storage environments. As storage architecture designs change over decades such projects need to adjust their tools, systems, and expertise to properly integrate such new technologies with their legacy systems. Traditional file systems lack the necessary support to accommodate such hybrid storage infrastructure resulting in more complex tool development to encompass all possible storage architectures used for the project. The MODIS Adaptive Processing System (MODAPS) and the Level 1 and Atmospheres Archive and Distribution System (LAADS) is an example of a project spanning several decades which has evolved into a hybrid storage architecture. MODAPS/LAADS has developed the Lightweight Virtual File System (LVFS) which ensures a seamless integration of all the different storage architectures, including standard block based POSIX compliant storage disks, to object based architectures such as the S3 compliant HGST Active Archive System, and the Seagate Kinetic disks utilizing the Kinetic Protocol. With LVFS, all analysis and processing tools used for the project continue to function unmodified regardless of the underlying storage architecture enabling MODAPS/LAADS to easily integrate any new storage architecture without the costly need to modify existing tools to utilize such new systems. Most file systems are designed as a single application responsible for using metadata to organizing the data into a tree, determine the location for data storage, and a method of data retrieval. We will show how LVFS' unique approach of treating these components in a loosely coupled fashion enables it to merge different storage architectures into a single uniform storage system which bridges the underlying hybrid architecture.

  5. A self-configuring control system for storage and computing departments at INFN-CNAF Tierl

    Science.gov (United States)

    Gregori, Daniele; Dal Pra, Stefano; Ricci, Pier Paolo; Pezzi, Michele; Prosperini, Andrea; Sapunenko, Vladimir

    2015-05-01

    The storage and farming departments at the INFN-CNAF Tier1[1] manage approximately thousands of computing nodes and several hundreds of servers that provides access to the disk and tape storage. In particular, the storage server machines should provide the following services: an efficient access to about 15 petabytes of disk space with different cluster of GPFS file system, the data transfers between LHC Tiers sites (Tier0, Tier1 and Tier2) via GridFTP cluster and Xrootd protocol and finally the writing and reading data operations on magnetic tape backend. One of the most important and essential point in order to get a reliable service is a control system that can warn if problems arise and which is able to perform automatic recovery operations in case of service interruptions or major failures. Moreover, during daily operations the configurations can change, i.e. if the GPFS cluster nodes roles can be modified and therefore the obsolete nodes must be removed from the control system production, and the new servers should be added to the ones that are already present. The manual management of all these changes is an operation that can be somewhat difficult in case of several changes, it can also take a long time and is easily subject to human error or misconfiguration. For these reasons we have developed a control system with the feature of self-configure itself if any change occurs. Currently, this system has been in production for about a year at the INFN-CNAF Tier1 with good results and hardly any major drawback. There are three major key points in this system. The first is a software configurator service (e.g. Quattor or Puppet) for the servers machines that we want to monitor with the control system; this service must ensure the presence of appropriate sensors and custom scripts on the nodes to check and should be able to install and update software packages on them. The second key element is a database containing information, according to a suitable format, on

  6. A self-configuring control system for storage and computing departments at INFN-CNAF Tierl

    International Nuclear Information System (INIS)

    Gregori, Daniele; Dal Pra, Stefano; Ricci, Pier Paolo; Pezzi, Michele; Prosperini, Andrea; Sapunenko, Vladimir

    2015-01-01

    The storage and farming departments at the INFN-CNAF Tier1[1] manage approximately thousands of computing nodes and several hundreds of servers that provides access to the disk and tape storage. In particular, the storage server machines should provide the following services: an efficient access to about 15 petabytes of disk space with different cluster of GPFS file system, the data transfers between LHC Tiers sites (Tier0, Tier1 and Tier2) via GridFTP cluster and Xrootd protocol and finally the writing and reading data operations on magnetic tape backend. One of the most important and essential point in order to get a reliable service is a control system that can warn if problems arise and which is able to perform automatic recovery operations in case of service interruptions or major failures. Moreover, during daily operations the configurations can change, i.e. if the GPFS cluster nodes roles can be modified and therefore the obsolete nodes must be removed from the control system production, and the new servers should be added to the ones that are already present. The manual management of all these changes is an operation that can be somewhat difficult in case of several changes, it can also take a long time and is easily subject to human error or misconfiguration. For these reasons we have developed a control system with the feature of self-configure itself if any change occurs. Currently, this system has been in production for about a year at the INFN-CNAF Tier1 with good results and hardly any major drawback. There are three major key points in this system. The first is a software configurator service (e.g. Quattor or Puppet) for the servers machines that we want to monitor with the control system; this service must ensure the presence of appropriate sensors and custom scripts on the nodes to check and should be able to install and update software packages on them. The second key element is a database containing information, according to a suitable format, on

  7. Non-volatile main memory management methods based on a file system.

    Science.gov (United States)

    Oikawa, Shuichi

    2014-01-01

    There are upcoming non-volatile (NV) memory technologies that provide byte addressability and high performance. PCM, MRAM, and STT-RAM are such examples. Such NV memory can be used as storage because of its data persistency without power supply while it can be used as main memory because of its high performance that matches up with DRAM. There are a number of researches that investigated its uses for main memory and storage. They were, however, conducted independently. This paper presents the methods that enables the integration of the main memory and file system management for NV memory. Such integration makes NV memory simultaneously utilized as both main memory and storage. The presented methods use a file system as their basis for the NV memory management. We implemented the proposed methods in the Linux kernel, and performed the evaluation on the QEMU system emulator. The evaluation results show that 1) the proposed methods can perform comparably to the existing DRAM memory allocator and significantly better than the page swapping, 2) their performance is affected by the internal data structures of a file system, and 3) the data structures appropriate for traditional hard disk drives do not always work effectively for byte addressable NV memory. We also performed the evaluation of the effects caused by the longer access latency of NV memory by cycle-accurate full-system simulation. The results show that the effect on page allocation cost is limited if the increase of latency is moderate.

  8. Odysseus/DFS: Integration of DBMS and Distributed File System for Transaction Processing of Big Data

    OpenAIRE

    Kim, Jun-Sung; Whang, Kyu-Young; Kwon, Hyuk-Yoon; Song, Il-Yeol

    2014-01-01

    The relational DBMS (RDBMS) has been widely used since it supports various high-level functionalities such as SQL, schemas, indexes, and transactions that do not exist in the O/S file system. But, a recent advent of big data technology facilitates development of new systems that sacrifice the DBMS functionality in order to efficiently manage large-scale data. Those so-called NoSQL systems use a distributed file system, which support scalability and reliability. They support scalability of the...

  9. Dynamic Heterogeneous Multiscale Filtration Model: Probing Micro- and Macroscopic Filtration Characteristics of Gasoline Particulate Filters.

    Science.gov (United States)

    Gong, Jian; Viswanathan, Sandeep; Rothamer, David A; Foster, David E; Rutland, Christopher J

    2017-10-03

    Motivated by high filtration efficiency (mass- and number-based) and low pressure drop requirements for gasoline particulate filters (GPFs), a previously developed heterogeneous multiscale filtration (HMF) model is extended to simulate dynamic filtration characteristics of GPFs. This dynamic HMF model is based on a probability density function (PDF) description of the pore size distribution and classical filtration theory. The microstructure of the porous substrate in a GPF is resolved and included in the model. Fundamental particulate filtration experiments were conducted using an exhaust filtration analysis (EFA) system for model validation. The particulate in the filtration experiments was sampled from a spark-ignition direct-injection (SIDI) gasoline engine. With the dynamic HMF model, evolution of the microscopic characteristics of the substrate (pore size distribution, porosity, permeability, and deposited particulate inside the porous substrate) during filtration can be probed. Also, predicted macroscopic filtration characteristics including particle number concentration and normalized pressure drop show good agreement with the experimental data. The resulting dynamic HMF model can be used to study the dynamic particulate filtration process in GPFs with distinct microstructures, serving as a powerful tool for GPF design and optimization.

  10. DICOM supported sofware configuration by XML files

    International Nuclear Information System (INIS)

    LucenaG, Bioing Fabian M; Valdez D, Andres E; Gomez, Maria E; Nasisi, Oscar H

    2007-01-01

    A method for the configuration of informatics systems that provide support to DICOM standards using XML files is proposed. The difference with other proposals is base on that this system does not code the information of a DICOM objects file, but codes the standard itself in an XML file. The development itself is the format for the XML files mentioned, in order that they can support what DICOM normalizes for multiple languages. In this way, the same configuration file (or files) can be use in different systems. Jointly the XML configuration file generated, we wrote also a set of CSS and XSL files. So the same file can be visualized in a standard browser, as a query system of DICOM standard, emerging use, that did not was a main objective but brings a great utility and versatility. We exposed also some uses examples of the configuration file mainly in relation with the load of DICOM information objects. Finally, at the conclusions we show the utility that the system has already provided when the edition of DICOM standard changes from 2006 to 2007

  11. Xrootd data access for LHC experiments at the INFN-CNAF Tier-1

    International Nuclear Information System (INIS)

    Gregori, Daniele; Prosperini, Andrea; Ricci, Pier Paolo; Sapunenko, Vladimir; Boccali, Tommaso; Noferini, Francesco; Vagnoni, Vincenzo

    2014-01-01

    The Mass Storage System installed at the INFN-CNAF Tier-1 is one of the biggest hierarchical storage facilities in Europe. It currently provides storage resources for about 12% of all LHC data, as well as for other experiments. The Grid Enabled Mass Storage System (GEMSS) is the current solution implemented at CNAF and it is based on a custom integration between a high performance parallel file system (General Parallel File System, GPFS) and a tape management system for long-term storage on magnetic media (Tivoli Storage Manager, TSM). Data access to Grid users is being granted since several years by the Storage Resource Manager (StoRM), an implementation of the standard SRM interface, widely adopted within the WLCG community. The evolving requirements from the LHC experiments and other users are leading to the adoption of more flexible methods for accessing the storage. These include the implementation of the so-called storage federations, i.e. geographically distributed federations allowing direct file access to the federated storage between sites. A specific integration between GEMSS and Xrootd has been developed at CNAF to match the requirements of the CMS experiment. This was already implemented for the ALICE use case, using ad-hoc Xrootd modifications. The new developments for CMS have been validated and are already available in the official Xrootd builds. This integration is currently in production and appropriate large scale tests have been made. In this paper we present the Xrootd solutions adopted for ALICE, CMS, ATLAS and LHCb to increase the availability and optimize the overall performance.

  12. Long term file migration. Part I: file reference patterns

    International Nuclear Information System (INIS)

    Smith, A.J.

    1978-08-01

    In most large computer installations, files are moved between on-line disk and mass storage (tape, integrated mass storage device) either automatically by the system or specifically at the direction of the user. This is the first of two papers which study the selection of algorithms for the automatic migration of files between mass storage and disk. The use of the text editor data sets at the Stanford Linear Accelerator Center (SLAC) computer installation is examined through the analysis of thirteen months of file reference data. Most files are used very few times. Of those that are used sufficiently frequently that their reference patterns may be examined, about a third show declining rates of reference during their lifetime; of the remainder, very few (about 5%) show correlated interreference intervals, and interreference intervals (in days) appear to be more skewed than would occur with the Bernoulli process. Thus, about two-thirds of all sufficiently active files appear to be referenced as a renewal process with a skewed interreference distribution. A large number of other file reference statistics (file lifetimes, interference distributions, moments, means, number of uses/file, file sizes, file rates of reference, etc.) are computed and presented. The results are applied in the following paper to the development and comparative evaluation of file migration algorithms. 17 figures, 13 tables

  13. A design for a new catalog manager and associated file management for the Land Analysis System (LAS)

    Science.gov (United States)

    Greenhagen, Cheryl

    1986-01-01

    Due to the larger number of different types of files used in an image processing system, a mechanism for file management beyond the bounds of typical operating systems is necessary. The Transportable Applications Executive (TAE) Catalog Manager was written to meet this need. Land Analysis System (LAS) users at the EROS Data Center (EDC) encountered some problems in using the TAE catalog manager, including catalog corruption, networking difficulties, and lack of a reliable tape storage and retrieval capability. These problems, coupled with the complexity of the TAE catalog manager, led to the decision to design a new file management system for LAS, tailored to the needs of the EDC user community. This design effort, which addressed catalog management, label services, associated data management, and enhancements to LAS applications, is described. The new file management design will provide many benefits including improved system integration, increased flexibility, enhanced reliability, enhanced portability, improved performance, and improved maintainability.

  14. Eight months of clinical experience with the Self-Adjusting File system.

    Science.gov (United States)

    Solomonov, Michael

    2011-06-01

    The Self-Adjusting File (SAF) system (ReDent-Nova, Ra'anana, Israel) has been recently introduced for the simultaneous instrumentation and irrigation of root canals. The SAF is claimed to adapt itself three dimensionally to the root canal, including its cross-section. It is operated with a continuous flow of sodium hypochlorite that is delivered into the root canal through the hollow file and claimed to be activated by sonic agitation of the irrigant. Our aim was to present for the first time clinical cases prepared with the SAF system and to describe a clinical classification of canals, according to their difficulty, with recommendations for endodontic treatment sequences for each category. This report is based on the experience of a single endodontist, who used the system to treat more than 50 consecutive primary endodontic cases over the prior 8 months. A clinical classification was developed which enabled the operator to select a treatment protocol for easy and optimal glide path preparation to be effectively used with the SAF file in the various root canals encountered in the clinical environment. Clinical classification of canal difficulty makes root canal treatment sequences with the SAF simple and predictable. Many types of cases can be treated with the SAF system although a novice user is advised to advance slowly along the learning curve from simpler to more complicated canals. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  15. FEDGROUP - A program system for producing group constants from evaluated nuclear data of files disseminated by IAEA

    International Nuclear Information System (INIS)

    Vertes, P.

    1976-06-01

    A program system for calculating group constants from several evaluated nuclear data files has been developed. These files are distributed by the Nuclear Data Section of IAEA. Our program system - FEDGROUP - has certain advantage over the well-known similar codes such as: 1. it requires only a medium sized computer />or approximately equal to 20000 words memory/, 2. it is easily adaptable to any type of computer, 3. it is flexible to the input evaluated nuclear data file and to the output group constant file. Nowadays, FEDGROUP calculates practically all types of group constants needed for reactor physics calculations by using the most frequent representations of evaluated data. (author)

  16. Comparative evaluation of effect of rotary and reciprocating single-file systems on pericervical dentin: A cone-beam computed tomography study.

    Science.gov (United States)

    Zinge, Priyanka Ramdas; Patil, Jayaprakash

    2017-01-01

    The aim of this study is to evaluate and compare the effect of one shape, Neolix rotary single-file systems and WaveOne, Reciproc reciprocating single-file systems on pericervical dentin (PCD) using cone-beam computed tomography (CBCT). A total of 40 freshly extracted mandibular premolars were collected and divided into two groups, namely, Group A - Rotary: A 1 - Neolix and A 2 - OneShape and Group B - Reciprocating: B 1 - WaveOne and B 2 - Reciproc. Preoperative scans of each were taken followed by conventional access cavity preparation and working length determination with 10-k file. Instrumentation of the canal was done according to the respective file system, and postinstrumentation CBCT scans of teeth were obtained. 90 μm thick slices were obtained 4 mm apical and coronal to the cementoenamel junction. The PCD thickness was calculated as the shortest distance from the canal outline to the closest adjacent root surface, which was measured in four surfaces, i.e., facial, lingual, mesial, and distal for all the groups in the two obtained scans. There was no significant difference found between rotary single-file systems and reciprocating single-file systems in their effect on PCD, but in Group B 2 , there was most significant loss of tooth structure in the mesial, lingual, and distal surface ( P file system removes more PCD as compared to other experimental groups, whereas Neolix single file system had the least effect on PCD.

  17. Design of a Control System for Quality Maintenance on Cutting Edges of Files Production

    Directory of Open Access Journals (Sweden)

    E. Seabra

    2000-01-01

    Full Text Available The file cutting edges are the most important parameter that influence the performance of the filing operation. The practice shows that the most efficient way of generating these cutting edges is by penetration, by blow, of a cutting tool, which creates a plastic deformation on the file body. The penetration depth is probably the most important factor of the final quality of a file. In the existing machines of files manufacturing, this depth is manually adjusted by the operator, using specific mechanism. This means that files are manufactured on an empirical basis, relying on subjective factors, that do not allow to keep constant quality level of the production. In a research work, being developed in the University of Minho, it is intended to eliminate the subjectivity factors by the means of the evolution of the present “all-mechanical” system to a “mechatronic” one. In this paper, which is related with that research work, it presented a study of a round files production machine, regarding the identification, as well as the categorisation, of the operating parameters that affect the cutting edges production. They are, as well, defined and quantified those factors that influence the final quality of a round file.

  18. 10 CFR 110.89 - Filing and service.

    Science.gov (United States)

    2010-01-01

    ...: Rulemakings and Adjudications Staff or via the E-Filing system, following the procedure set forth in 10 CFR 2.302. Filing by mail is complete upon deposit in the mail. Filing via the E-Filing system is completed... residence with some occupant of suitable age and discretion; (2) Following the requirements for E-Filing in...

  19. Effect of Patency File on Transportation and Curve Straightening in Canal Preparation with ProTaper System.

    Science.gov (United States)

    Hasheminia, Seyed Mohsen; Farhadi, Nastaran; Shokraneh, Ali

    2013-01-01

    The aim of this ex vivo study was to evaluate the effect of using a patency file on apical transportation and curve straightening during canal instrumentation with the ProTaper rotary system. Seventy permanent mandibular first molars with mesiobuccal canals, measuring 18-23 mm in length and with a 25-40° curvature (according to the Schneider method), were selected. The working lengths were determined and the teeth were mounted and divided into two experimental groups: (A) prepared by the ProTaper system without using a patency file (n = 35) and (B) prepared by the ProTaper system using a patency file (n = 35). Radiographs taken before and after the preparation were imported into Photoshop software and the apical transportation, and curve straightening were measured. Data were analyzed using independent t-test. Partial correlation analysis was performed to evaluate the relationship between the initial curvature, transportation, and curve straightening (α = 0.05). Using a patency file during canal preparation significantly decreased both apical transportation and curve straightening (P system.

  20. 75 FR 27986 - Electronic Filing System-Web (EFS-Web) Contingency Option

    Science.gov (United States)

    2010-05-19

    ...] Electronic Filing System--Web (EFS-Web) Contingency Option AGENCY: United States Patent and Trademark Office... contingency option when the primary portal to EFS-Web has an unscheduled outage. Previously, the entire EFS-Web system is not available to the users during such an outage. The contingency option in EFS-Web will...

  1. File structure and organization in the automation system for operative account of equipment and materials in JINR

    International Nuclear Information System (INIS)

    Gulyaeva, N.D.; Markova, N.F.; Nikitina, V.I.; Tentyukova, G.N.

    1975-01-01

    The structure and organization of files in the information bank for the first variant of a JINR material and technical supply subsystem are described. Automated system of equipment operative stock-taking on the base of the SDS-6200 computer is developed. Information is stored on magnetic discs. The arrangement of each file depends on its purpose and structure of data. Access to the files can be arbitrary or consecutive. The files are divided into groups: primary document files, long-term reference, information on items that may change as a result of administrative decision [ru

  2. Browsing for Information on the Web and in the File System

    National Research Council Canada - National Science Library

    Seifert, Ethan; Stumpf, Simone; Herlocker, Jonathan; Wynn, Eleanor

    2007-01-01

    Browsing is one of the methods used for finding and refinding information on the web or in the file local system and there are opportunities to avoid this, particularly if that information is revisited frequently...

  3. 10 CFR 2.302 - Filing of documents.

    Science.gov (United States)

    2010-01-01

    ... this part shall be electronically transmitted through the E-Filing system, unless the Commission or... all methods of filing have been completed. (e) For filings by electronic transmission, the filer must... digital ID certificates, the NRC permits participants in the proceeding to access the E-Filing system to...

  4. File Managing and Program Execution in Web Operating Systems

    OpenAIRE

    Bravetti, Mario

    2010-01-01

    Web Operating Systems can be seen as an extension of traditional Operating Systems where the addresses used to manage files and execute programs (via the basic load/execution mechanism) are extended from local filesystem path-names to URLs. A first consequence is that, similarly as in traditional web technologies, executing a program at a given URL, can be done in two modalities: either the execution is performed client-side at the invoking machine (and relative URL addressing in the executed...

  5. Endodontic treatment of mandibular molar with root dilaceration using Reciproc single-file system.

    Science.gov (United States)

    Meireles, Daniely Amorin; Bastos, Mariana Mena Barreto; Marques, André Augusto Franco; Garcia, Lucas da Fonseca Roberti; Sponchiado, Emílio Carlos

    2013-08-01

    Biomechanical preparation of root canals with accentuated curvature is challenging. New rotatory systems, such as Reciproc, require a shorter period of time to prepare curved canals, and became a viable alternative for endodontic treatment of teeth with root dilaceration. Thus, this study aimed to report a clinical case of endodontic therapy of root with accentuated dilaceration using Reciproc single-file system. Mandibular right second molar was diagnosed as asymptomatic irreversible pulpitis. Pulp chamber access was performed, and glide path was created with #10 K-file (Dentsply Maillefer) and PathFile #13, #16 and #19 (Dentsply Maillefer) up to the temporary working length. The working length measured corresponded to 20 mm in the mesio-buccal and mesio-lingual canals, and 22 mm in the distal canal. The R25 file (VDW GmbH) was used in all the canals for instrumentation and final preparation, followed by filling with Reciproc gutta-percha cones (VDW GmbH) and AH Plus sealer (Dentsply Maillefer), using thermal compaction technique. The case has been receiving follow-up for 6 mon and no painful symptomatology or periapical lesions have been found. Despite the difficulties, the treatment could be performed in a shorter period of time than the conventional methods.

  6. Endodontic treatment of mandibular molar with root dilaceration using Reciproc single-file system

    Directory of Open Access Journals (Sweden)

    Daniely Amorin Meireles

    2013-08-01

    Full Text Available Biomechanical preparation of root canals with accentuated curvature is challenging. New rotatory systems, such as Reciproc, require a shorter period of time to prepare curved canals, and became a viable alternative for endodontic treatment of teeth with root dilaceration. Thus, this study aimed to report a clinical case of endodontic therapy of root with accentuated dilaceration using Reciproc single-file system. Mandibular right second molar was diagnosed as asymptomatic irreversible pulpitis. Pulp chamber access was performed, and glide path was created with #10 K-file (Dentsply Maillefer and PathFile #13, #16 and #19 (Dentsply Maillefer up to the temporary working length. The working length measured corresponded to 20 mm in the mesio-buccal and mesio-lingual canals, and 22 mm in the distal canal. The R25 file (VDW GmbH was used in all the canals for instrumentation and final preparation, followed by filling with Reciproc gutta-percha cones (VDW GmbH and AH Plus sealer (Dentsply Maillefer, using thermal compaction technique. The case has been receiving follow-up for 6 mon and no painful symptomatology or periapical lesions have been found. Despite the difficulties, the treatment could be performed in a shorter period of time than the conventional methods.

  7. Canal shaping of different single-file systems in curved root canals

    Directory of Open Access Journals (Sweden)

    Maurizio D'Amario

    2017-12-01

    Full Text Available Background/Purpose: This study compared maintenance of canal anatomy, occurrence of apical transportation, and working time observed after instrumentation with One Shape New Generation rotary system (Micro-Mega, with those observed after instrumentation with Reciproc (VDW and WaveOne (Dentsply-Maillefer reciprocating systems. Materials and methods: The mesial canals of 45 mandibular molars (curvature angles between 35° and 45° were selected. Specimens were randomly divided into three groups, and canal preparations were performed using One Shape, Reciproc, or WaveOne systems (size #25. A digital double radiographic technique was used to determine apical transportation and change in angle of curvature. Also, working time and instrument failures were recorded. Data were statistically analyzed. Results: During preparation, no file fractured. No statistically significant differences were found among groups. No system showed a significantly faster preparation time than others (P>0.05. All instruments maintained the original canal curvature well and were safe to use. Conclusion: Both continuous rotary instrument and reciprocating systems did not have any influence on the presence of apical transportation or caused an alteration in angle of canal curvature. Keywords: canal curvature, canal straightening, endodontics, reciprocating motion, single file instrumentation

  8. RRB's SVES Input File - Post Entitlement State Verification and Exchange System (PSSVES)

    Data.gov (United States)

    Social Security Administration — Several PSSVES request files are transmitted to SSA each year for processing in the State Verification and Exchange System (SVES). This is a first step in obtaining...

  9. Optimized distributed systems achieve significant performance improvement on sorted merging of massive VCF files.

    Science.gov (United States)

    Sun, Xiaobo; Gao, Jingjing; Jin, Peng; Eng, Celeste; Burchard, Esteban G; Beaty, Terri H; Ruczinski, Ingo; Mathias, Rasika A; Barnes, Kathleen; Wang, Fusheng; Qin, Zhaohui S

    2018-06-01

    Sorted merging of genomic data is a common data operation necessary in many sequencing-based studies. It involves sorting and merging genomic data from different subjects by their genomic locations. In particular, merging a large number of variant call format (VCF) files is frequently required in large-scale whole-genome sequencing or whole-exome sequencing projects. Traditional single-machine based methods become increasingly inefficient when processing large numbers of files due to the excessive computation time and Input/Output bottleneck. Distributed systems and more recent cloud-based systems offer an attractive solution. However, carefully designed and optimized workflow patterns and execution plans (schemas) are required to take full advantage of the increased computing power while overcoming bottlenecks to achieve high performance. In this study, we custom-design optimized schemas for three Apache big data platforms, Hadoop (MapReduce), HBase, and Spark, to perform sorted merging of a large number of VCF files. These schemas all adopt the divide-and-conquer strategy to split the merging job into sequential phases/stages consisting of subtasks that are conquered in an ordered, parallel, and bottleneck-free way. In two illustrating examples, we test the performance of our schemas on merging multiple VCF files into either a single TPED or a single VCF file, which are benchmarked with the traditional single/parallel multiway-merge methods, message passing interface (MPI)-based high-performance computing (HPC) implementation, and the popular VCFTools. Our experiments suggest all three schemas either deliver a significant improvement in efficiency or render much better strong and weak scalabilities over traditional methods. Our findings provide generalized scalable schemas for performing sorted merging on genetics and genomics data using these Apache distributed systems.

  10. IAS 1 Presentation of Financial Statements - A Closer Look

    OpenAIRE

    Muthupandian, K S

    2008-01-01

    The International Accounting Standards Committee issued the International Accounting Standard 1 Presentation of Financial Statements. The objective of IAS 1 is to prescribe the basis for presentation of general purpose financial statements (GPFS), to ensure comparability both with the entity's financial statements of previous periods and with the financial statements of other entities. The objective of GPFS is to provide information about the financial position, financial performance, and cas...

  11. Radiological reporting system developed with FileMakerPro. Cooperation with HIS, RIS, and PACS

    International Nuclear Information System (INIS)

    Kawakami, Satoshi

    2004-01-01

    This article briefly describes our original radiological reporting system. This system was developed with the widely used database software FileMakerPro (ver 5.5). The reporting system can obtain information about patients and examinations from a radiology information system (RIS) by the Open DataBase Connectivity (ODBC) technique. By clicking the button on the reporting system, the corresponding Digital Imaging and Communications in Medicine (DICOM) images can be displayed on a picture archiving and communication system (PACS) workstation monitor. Reference images in JPEG format can be easily moved from PACS to the reporting system. Reports produced by the reporting system are distributed to the hospital information system (HIS) in Portable Document Format (PDF), through another web server. By utilizing the capacity of FileMakerPro, the human-machine interface of the system has been able to be improved easily. In addition, cooperation with HIS, RIS, and PACS could be constructed. Therefore, this original system would contribute to increasing the efficiency of radiological diagnosis. (author)

  12. Toward Millions of File System IOPS on Low-Cost, Commodity Hardware.

    Science.gov (United States)

    Zheng, Da; Burns, Randal; Szalay, Alexander S

    2013-01-01

    We describe a storage system that removes I/O bottlenecks to achieve more than one million IOPS based on a user-space file abstraction for arrays of commodity SSDs. The file abstraction refactors I/O scheduling and placement for extreme parallelism and non-uniform memory and I/O. The system includes a set-associative, parallel page cache in the user space. We redesign page caching to eliminate CPU overhead and lock-contention in non-uniform memory architecture machines. We evaluate our design on a 32 core NUMA machine with four, eight-core processors. Experiments show that our design delivers 1.23 million 512-byte read IOPS. The page cache realizes the scalable IOPS of Linux asynchronous I/O (AIO) and increases user-perceived I/O performance linearly with cache hit rates. The parallel, set-associative cache matches the cache hit rates of the global Linux page cache under real workloads.

  13. Visual system of recovering and combination of information for ENDF (Evaluated Nuclear Data File) format libraries

    International Nuclear Information System (INIS)

    Ferreira, Claudia A.S. Velloso; Corcuera, Raquel A. Paviotti

    1997-01-01

    This report presents a data information retrieval and merger system for ENDF (Evaluated Nuclear Data File) format libraries, which can be run on personal computers under the Windows TM environment. The input is the name of an ENDF/B library, which can be chosen in a proper window. The system has a display function which allows the user to visualize the reaction data of a specific nuclide and to produce a printed copy of these data. The system allows the user to retrieve and/or combine evaluated data to create a single file of data in ENDF format, from a number of different files, each of which is in the ENDF format. The user can also create a mini-library from an ENDF/B library. This interactive and easy-to-handle system is a useful tool for Nuclear Data Centers and it is also of interest to nuclear and reactor physics researchers. (author)

  14. Migrant Student Record Transfer System (MSRTS) [machine-readable data file].

    Science.gov (United States)

    Arkansas State Dept. of Education, Little Rock. General Education Div.

    The Migrant Student Record Transfer System (MSRTS) machine-readable data file (MRDF) is a collection of education and health data on more than 750,000 migrant children in grades K-12 in the United States (except Hawaii), the District of Columbia, and the outlying territories of Puerto Rico and the Mariana and Marshall Islands. The active file…

  15. Clinical Evaluation of Quality of Obturation and Instrumentation Time using Two Modified Rotary File Systems with Manual Instrumentation in Primary Teeth.

    Science.gov (United States)

    Govindaraju, Lavanya; Jeevanandan, Ganesh; Subramanian, Emg

    2017-09-01

    Pulp therapy in primary teeth has been performed using various instrumentation techniques. However, the conventional instrumentation technique used for root canal preparation in primary teeth is hand instrumentation. Various Nickel-Titanium (Ni-Ti) instruments are available to perform efficient root canal preparation in primary teeth. These Ni-Ti instruments has been designed to aid in better root canal preparation in permanent teeth but are rarely used in primary teeth. It is necessary to assess the feasibility of using these adult rotary files with a modified sequence in primary teeth. To compare the quality of obturation and instrumentation time during root canal preparation using hand files and modified rotary file systems in primary molars. Forty-five primary mandibular molars were randomly assigned to three experimental groups (n=15). Group I was instrumented using k-hand files, Group II with S2 ProTaper universal file and Group III with 0.25 tip 4% taper K3 rotary file. Standardized digital radiographs were taken before and after root canal instrumentation. Root canal preparation time was also recorded. Statistical analysis of the obtained data was done using SPSS Software version 17.0. An intergroup comparison of the instrumentation time and the quality of obturation was done using ANOVA and Chi-square test with the level of significance set at 0.05. No significant differences were noted with regard to the quality of obturation (p=0.791). However, a statistically significant difference was noted in the instrumentation time between the three groups (pProTaper rotary system had significantly lesser instrumentation time when compared to that of K3 rotary system and hand file system. The hand files, S2 ProTaper Universal and K3 0.25 tip 4% taper files systems performed similarly with respect to the quality of obturation. There was a significant difference in instrumentation time with manual instrumentation compared to the modified rotary file systems in primary

  16. Electronic licensing filing system development and implementation experience

    International Nuclear Information System (INIS)

    Walderhaug, J.

    1993-01-01

    The Electronic Licensing Filing System (ELFS) is a microcomputer-based integrated document search and retrieval system for the Nuclear Regulatory Affairs Division of Southern California Edison (SCE). ELFS allows the user access to the current licensing basis of a subject by providing an easily searchable electronic information data base consisting of regulatory correspondence, design-bases documentation, licensing documents [updated final safety and analysis report (UFSAR) and technical specifications], and regulatory guidance or directives [10CFR, generic letters, bulletins, notices, circulars, regulatory guides, policy statements, and selected US Nuclear Regulatory Commission (NRC) regulations]. It is used in the preparation of correspondence and submittals to the NRC, 50.59 safety evaluations, design-bases reconstitution, and commitment tracking and management

  17. 75 FR 48629 - Electronic Tariff Filing System (ETFS)

    Science.gov (United States)

    2010-08-11

    ... composition requirements of our rules. This would ensure that all tariffs have a basic uniformity that will... transmittal: (1) A summary of the filing's basic rates, terms and conditions; (2) A statement concerning... filing, the basis of ratemaking employed, and economic information to support the changed or new matter...

  18. Privacy Act System of Records: Freedom of Information Act Request and Appeal File, EPA-9

    Science.gov (United States)

    Learn more about the Freedom of Information Act Request and Appeal File System, including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedures.

  19. Analyzing Log Files using Data-Mining

    Directory of Open Access Journals (Sweden)

    Marius Mihut

    2008-01-01

    Full Text Available Information systems (i.e. servers, applications and communication devices create a large amount of monitoring data that are saved as log files. For analyzing them, a data-mining approach is helpful. This article presents the steps which are necessary for creating an ‘analyzing instrument’, based on an open source software called Waikato Environment for Knowledge Analysis (Weka [1]. For exemplification, a system log file created by a Windows-based operating system, is used as input file.

  20. CryptoCache: A Secure Sharable File Cache for Roaming Users

    DEFF Research Database (Denmark)

    Jensen, Christian D.

    2000-01-01

    . Conventional distributed file systems cache everything locally or not at all; there is no possibility to cache files on nearby nodes.In this paper we present the design of a secure cache system called CryptoCache that allows roaming users to cache files on untrusted file hosting servers. The system allows...... flexible sharing of cached files among unauthenticated users, i.e. unlike most distributed file systems CryptoCache does not require a global authentication framework.Files are encrypted when they are transferred over the network and while stored on untrusted servers. The system uses public key......Small mobile computers are now sufficiently powerful to run many applications, but storage capacity remains limited so working files cannot be cached or stored locally. Even if files can be stored locally, the mobile device is not powerful enough to act as server in collaborations with other users...

  1. Electrochemical impedance spectroscopy investigation on the clinical lifetime of ProTaper rotary file system.

    Science.gov (United States)

    Penta, Virgil; Pirvu, Cristian; Demetrescu, Ioana

    2014-01-01

    The main objective of the current paper is to show that electrochemical impedance spectroscopy (EIS) could be a method for evaluating and predicting of ProTaper rotary file system clinical lifespan. This particular aspect of everyday use of the endodontic files is of great importance in each dental practice and has profound clinical implications. The method used for quantification resides in the electrochemical impedance spectroscopy theory and has in its main focus the characteristics of the surface titanium oxide layer. This electrochemical technique has been adapted successfully to identify the quality of the Ni-Ti files oxide layer. The modification of this protective layer induces changes in corrosion behavior of the alloy modifying the impedance value of the file. In order to assess the method, 14 ProTaper sets utilized on different patients in a dental clinic have been submitted for testing using EIS. The information obtained in regard to the surface oxide layer has offered an indication of use and proves that the said layer evolves with each clinical application. The novelty of this research is related to an electrochemical technique successfully adapted for Ni-Ti file investigation and correlation with surface and clinical aspects.

  2. Comparison of the amount of apical debris extrusion associated with different retreatment systems and supplementary file application during retreatment process.

    Science.gov (United States)

    Çiçek, Ersan; Koçak, Mustafa Murat; Koçak, Sibel; Sağlam, Baran Can

    2016-01-01

    The type of instrument affects the amount of debris extruded. The aim of this study was to compare the effect of retreatment systems and supplementary file application on the amount of apical debris extrusion. Forty-eight extracted mandibular premolars with a single canal and similar length were selected. The root canals were prepared with the ProTaper Universal system with a torque-controlled engine. The root canals were dried and were obturated using Gutta-percha and sealer. The specimens were randomly divided into four equal groups according to the retreatment procedures (Group 1, Mtwo retreatment files; Group 2, Mtwo retreatment files + Mtwo rotary file #30 supplementary file; Group 3, ProTaper Universal retreatment (PTUR) files; and Group 4, PTUR files + ProTaper F3 supplementary file). The extruded debris during instrumentation were collected into preweighed Eppendorf tubes. The amount of apically extruded debris was calculated by subtracting the initial weight of the tube from the final weight. Three consecutive weights were obtained for each tube. No statistically significant difference was found in the amount of apically extruded debris between Groups 1 and 3 (P = 0.590). A significant difference was observed between Groups 1 and 2 (P file significantly increased the amount of apically extruded debris.

  3. Evaluation of apical extrusion of debris and irrigant using two new reciprocating and one continuous rotation single file systems.

    Science.gov (United States)

    Nayak, Gurudutt; Singh, Inderpreet; Shetty, Shashit; Dahiya, Surya

    2014-05-01

    Apical extrusion of debris and irrigants during cleaning and shaping of the root canal is one of the main causes of periapical inflammation and postoperative flare-ups. The purpose of this study was to quantitatively measure the amount of debris and irrigants extruded apically in single rooted canals using two reciprocating and one rotary single file nickel-titanium instrumentation systems. Sixty human mandibular premolars, randomly assigned to three groups (n = 20) were instrumented using two reciprocating (Reciproc and Wave One) and one rotary (One Shape) single-file nickel-titanium systems. Bidistilled water was used as irrigant with traditional needle irrigation delivery system. Eppendorf tubes were used as test apparatus for collection of debris and irrigant. The volume of extruded irrigant was collected and quantified via 0.1-mL increment measure supplied on the disposable plastic insulin syringe. The liquid inside the tubes was dried and the mean weight of debris was assessed using an electronic microbalance. The data were statistically analysed using Kruskal-Wallis nonparametric test and Mann Whitney U test with Bonferroni adjustment. P-values less than 0.05 were considered significant. The Reciproc file system produced significantly more debris compared with OneShape file system (P0.05). Extrusion of irrigant was statistically insignificant irrespective of the instrument or instrumentation technique used (P >0.05). Although all systems caused apical extrusion of debris and irrigant, continuous rotary instrumentation was associated with less extrusion as compared with the use of reciprocating file systems.

  4. 76 FR 9780 - Notification of Deletion of System of Records; EPA Parking Control Office File (EPA-10) and EPA...

    Science.gov (United States)

    2011-02-22

    ... System of Records; EPA Parking Control Office File (EPA-10) and EPA Transit and Guaranteed Ride Home... Environmental Protection Agency (EPA) is deleting the systems of records for EPA Parking Control Office File... through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/ . Dated...

  5. DIGITAL ONCOLOGY PATIENT RECORD - HETEROGENEOUS FILE BASED APPROACH

    Directory of Open Access Journals (Sweden)

    Nikolay Sapundzhiev

    2010-12-01

    Full Text Available Introduction: Oncology patients need extensive follow-up and meticulous documentation. The aim of this study was to introduce a simple, platform independent file based system for documentation of diagnostic and therapeutic procedures in oncology patients and test its function.Material and methods: A file-name based system of the type M1M2M3.F2 was introduced, where M1 is a unique identifier for the patient, M2 is the date of the clinical intervention/event, M3 is an identifier for the author of the medical record and F2 is the specific software generated file-name extension.Results: This system is in use at 5 institutions, where a total of 11 persons on 14 different workstations inputted 16591 entries (files for 2370. The merge process was tested on 2 operating systems - when copied together all files sort up as expected by patient, and for each patient in a chronological order, providing a digital cumulative patient record, which contains heterogeneous file formats.Conclusion: The file based approach for storing heterogeneous digital patient related information is an reliable system, which can handle open-source, proprietary, general and custom file formats and seems to be easily scalable. Further development of software for automatic checks of the integrity and searching and indexing of the files is expected to produce a more user-friendly environment

  6. An asynchronous writing method for restart files in the gysela code in prevision of exascale systems*

    Directory of Open Access Journals (Sweden)

    Thomine O.

    2013-12-01

    Full Text Available The present work deals with an optimization procedure developed in the full-f global GYrokinetic SEmi-LAgrangian code (GYSELA. Optimizing the writing of the restart files is necessary to reduce the computing impact of crashes. These files require a very large memory space, and particularly so for very large mesh sizes. The limited bandwidth of the data pipe between the comput- ing nodes and the storage system induces a non-scalable part in the GYSELA code, which increases with the mesh size. Indeed the transfer time of RAM to data depends linearly on the files size. The necessity of non synchronized writing-in-file procedure is therefore crucial. A new GYSELA module has been developed. This asynchronous procedure allows the frequent writ- ing of the restart files, whilst preventing a severe slowing down due to the limited writing bandwidth. This method has been improved to generate a checksum control of the restart files, and automatically rerun the code in case of a crash for any cause.

  7. Estimating Motor Carrier Management Information System Crash File Underreporting from Carrier Records.

    Science.gov (United States)

    2017-08-01

    This FMCSA-sponsored research investigated the claim that motor carriers have a substantial number of crashes in their own records that are not contained in the Motor Carrier Management Information System (MCMIS) crash file. Based on the results of t...

  8. Evaluated neutronic file for indium

    International Nuclear Information System (INIS)

    Smith, A.B.; Chiba, S.; Smith, D.L.; Meadows, J.W.; Guenther, P.T.; Lawson, R.D.; Howerton, R.J.

    1990-01-01

    A comprehensive evaluated neutronic data file for elemental indium is documented. This file, extending from 10 -5 eV to 20 MeV, is presented in the ENDF/B-VI format, and contains all neutron-induced processes necessary for the vast majority of neutronic applications. In addition, an evaluation of the 115 In(n,n') 116m In dosimetry reaction is presented as a separate file. Attention is given in quantitative values, with corresponding uncertainty information. These files have been submitted for consideration as a part of the ENDF/B-VI national evaluated-file system. 144 refs., 10 figs., 4 tabs

  9. Effect of Instrumentation Length and Instrumentation Systems: Hand Versus Rotary Files on Apical Crack Formation - An In vitro Study.

    Science.gov (United States)

    Devale, Madhuri R; Mahesh, M C; Bhandary, Shreetha

    2017-01-01

    Stresses generated during root canal instrumentation have been reported to cause apical cracks. The smaller, less pronounced defects like cracks can later propagate into vertical root fracture, when the tooth is subjected to repeated stresses from endodontic or restorative procedures. This study evaluated occurrence of apical cracks with stainless steel hand files, rotary NiTi RaCe and K3 files at two different instrumentation lengths. In the present in vitro study, 60 mandibular premolars were mounted in resin blocks with simulated periodontal ligament. Apical 3 mm of the root surfaces were exposed and stained using India ink. Preoperative images of root apices were obtained at 100x using stereomicroscope. The teeth were divided into six groups of 10 each. First two groups were instrumented with stainless steel files, next two groups with rotary NiTi RaCe files and the last two groups with rotary NiTi K3 files. The instrumentation was carried out till the apical foramen (Working Length-WL) and 1 mm short of the apical foramen (WL-1) with each file system. After root canal instrumentation, postoperative images of root apices were obtained. Preoperative and postoperative images were compared and the occurrence of cracks was recorded. Descriptive statistical analysis and Chi-square tests were used to analyze the results. Apical root cracks were seen in 30%, 35% and 20% of teeth instrumented with K-files, RaCe files and K3 files respectively. There was no statistical significance among three instrumentation systems in the formation of apical cracks (p=0.563). Apical cracks were seen in 40% and 20% of teeth instrumented with K-files; 60% and 10% of teeth with RaCe files and 40% and 0% of teeth with K3 files at WL and WL-1 respectively. For groups instrumented with hand files there was no statistical significance in number of cracks at WL and WL-1 (p=0.628). But for teeth instrumented with RaCe files and K3 files significantly more number of cracks were seen at WL than

  10. Evaluation of apical extrusion of debris and irrigant using two new reciprocating and one continuous rotation single file systems.

    Directory of Open Access Journals (Sweden)

    Gurudutt Nayak

    2014-06-01

    Full Text Available Apical extrusion of debris and irrigants during cleaning and shaping of the root canal is one of the main causes of periapical inflammation and postoperative flare-ups. The purpose of this study was to quantitatively measure the amount of debris and irrigants extruded apically in single rooted canals using two reciprocating and one rotary single file nickel-titanium instrumentation systems.Sixty human mandibular premolars, randomly assigned to three groups (n = 20 were instrumented using two reciprocating (Reciproc and Wave One and one rotary (One Shape single-file nickel-titanium systems. Bidistilled water was used as irrigant with traditional needle irrigation delivery system. Eppendorf tubes were used as test apparatus for collection of debris and irrigant. The volume of extruded irrigant was collected and quantified via 0.1-mL increment measure supplied on the disposable plastic insulin syringe. The liquid inside the tubes was dried and the mean weight of debris was assessed using an electronic microbalance. The data were statistically analysed using Kruskal-Wallis nonparametric test and Mann Whitney U test with Bonferroni adjustment. P-values less than 0.05 were considered significant.The Reciproc file system produced significantly more debris compared with OneShape file system (P0.05. Extrusion of irrigant was statistically insignificant irrespective of the instrument or instrumentation technique used (P >0.05.Although all systems caused apical extrusion of debris and irrigant, continuous rotary instrumentation was associated with less extrusion as compared with the use of reciprocating file systems.

  11. Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography -An In Vitro Study.

    Science.gov (United States)

    Dhingra, Annil; Ruhal, Nidhi; Miglani, Anjali

    2015-04-01

    Successful endodontic therapy depends on many factor, one of the most important step in any root canal treatment is root canal preparation. In addition, respecting the original shape of the canal is of the same importance; otherwise, canal aberrations such as transportation will be created. The purpose of this study is to compare and evaluate Reciprocating WaveOne ,Reciproc and Rotary Oneshape Single File Instrumentation System On Cervical Dentin Thickness, Cross Sectional Area and Canal Transportation on First Mandibular Molar Using Cone Beam Computed Tomography. Sixty Mandibular First Molars extracted due to periodontal reason was collected from the Department of Oral and Maxillofacial. Teeth were prepared using one rotary and two reciprocating single file system. Teeth were divided into 3 groups 20 teeth in each group. Pre instrumentation and Post instrumentation scans was done and evaluated for three parameters Canal Transportation, Cervical Dentinal Thickness, Cross-sectional Area. Results were analysed statistically using ANOVA, Post-Hoc Tukey analysis. The change in cross-sectional area after filing showed significant difference at 0mm, 1mm, 2mm and 7mm (pfile system over a distance of 7 mm (starting from 0mm and then evaluation at 1mm, 2mm, 3mm, 5mm and 7mm), the results showed a significant difference among the file systems at various lengths (p= 0.014, 0.046, 0.004, 0.028, 0.005 & 0.029 respectively). Mean value of cervical dentinal removal is maximum at all the levels for oneshape and minimum for waveone showing the better quality of waveone and reciproc over oneshape file system. Significant difference was found at 9mm, 11mm and 12mm between all the three file systems (p<0.001,< 0.001, <0.001). It was concluded that reciprocating motion is better than rotary motion in all the three parameters Canal Transportation, Cross-sectional Area, Cervical Dentinal Thickness.

  12. Comparison of quality of obturation and instrumentation time using hand files and two rotary file systems in primary molars: A single-blinded randomized controlled trial.

    Science.gov (United States)

    Govindaraju, Lavanya; Jeevanandan, Ganesh; Subramanian, E M G

    2017-01-01

    In permanent dentition, different rotary systems are used for canal cleaning and shaping. Rotary instrumentation in pediatric dentistry is an emerging concept. A very few studies have compared the efficiency of rotary instrumentation for canal preparation in primary teeth. Hence, this study was performed to compare the obturation quality and instrumentation time of two rotary files systems - Protaper, Mtwo with hand files in primary molars. Forty-five primary mandibular molars were randomly allotted to one of the three groups. Instrumentation was done using K-files in Group 1; Protaper in Group 2; and Mtwo in Group 3. Instrumentation time was recorded. The canal filling quality was assessed as underfill, optimal fill, and overfill. Statistical analysis was done using Chi-square, ANOVA, and post hoc Tukey test. No significant difference was observed in the quality of obturation among three groups. Intergroup comparison of the instrumentation time showed a statistically significant difference between the three groups. The use of rotary instrumentation in primary teeth results in marked reduction in the instrumentation time and improves the quality of obturation.

  13. EFEKTIVITAS MANAJEMEN E-SYSTEM DALAM PELAYANAN PERPAJAKAN TERHADAP KEPATUHAN WAJIB PAJAK DALAM PELAPORAN SPT (E-FILING

    Directory of Open Access Journals (Sweden)

    Pujo Gunarso

    2017-04-01

    Full Text Available This purposes of this study is to analyze the influence of management effectiveness of e-taxation system to tax compliance in terms of reporting such as (e-filing. This research was conducted at the Tax Office Batu region in the tax year 2015. The research method uses a descriptive quantitative method. The results of this study explains that the management of e-filing for the realization of the Key Performance Index e-filing using point based on the rules of the Directorate General of Taxation number: PER-03 / PJ / 2015 has been effective. �

  14. Ground-Based Global Navigation Satellite System (GNSS) GLONASS Broadcast Ephemeris Data (hourly files) from NASA CDDIS

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset consists of ground-based Global Navigation Satellite System (GNSS) GLObal NAvigation Satellite System (GLONASS) Broadcast Ephemeris Data (hourly files)...

  15. Security in the CernVM File System and the Frontier Distributed Database Caching System

    International Nuclear Information System (INIS)

    Dykstra, D; Blomer, J

    2014-01-01

    Both the CernVM File System (CVMFS) and the Frontier Distributed Database Caching System (Frontier) distribute centrally updated data worldwide for LHC experiments using http proxy caches. Neither system provides privacy or access control on reading the data, but both control access to updates of the data and can guarantee the authenticity and integrity of the data transferred to clients over the internet. CVMFS has since its early days required digital signatures and secure hashes on all distributed data, and recently Frontier has added X.509-based authenticity and integrity checking. In this paper we detail and compare the security models of CVMFS and Frontier.

  16. Security in the CernVM File System and the Frontier Distributed Database Caching System

    Science.gov (United States)

    Dykstra, D.; Blomer, J.

    2014-06-01

    Both the CernVM File System (CVMFS) and the Frontier Distributed Database Caching System (Frontier) distribute centrally updated data worldwide for LHC experiments using http proxy caches. Neither system provides privacy or access control on reading the data, but both control access to updates of the data and can guarantee the authenticity and integrity of the data transferred to clients over the internet. CVMFS has since its early days required digital signatures and secure hashes on all distributed data, and recently Frontier has added X.509-based authenticity and integrity checking. In this paper we detail and compare the security models of CVMFS and Frontier.

  17. 47 CFR 61.14 - Method of filing publications.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Method of filing publications. 61.14 Section 61...) TARIFFS Rules for Electronic Filing § 61.14 Method of filing publications. (a) Publications filed... date of a publication received by the Electronic Tariff Filing System will be determined by the date...

  18. PROOF-based analysis on the ATLAS grid facilities: first experience with the PoD/PanDa plugin

    International Nuclear Information System (INIS)

    Vilucchi, E; Nardo, R Di; Mancini, G; Pineda, A R Sanchez; Salvo, A De; Donato, C Di; Doria, A; Ganis, G; Manafov, A; Mazza, S; Preltz, F; Rebatto, D; Salvucci, A

    2014-01-01

    In the ATLAS computing model Grid resources are managed by PanDA, the system designed for production and distributed analysis, and data are stored under various formats in ROOT files. End-user physicists have the choice to use either the ATHENA framework or directly ROOT, that provides users the possibility to use PROOF to exploit the computing power of multi-core machines or to dynamically manage analysis facilities. Since analysis facilities are, in general, not dedicated to PROOF only, PROOF-on-Demand (PoD) is used to enable PROOF on top of an existing resource management system. In a previous work we investigated the usage of PoD to enable PROOF-based analysis on Tier-2 facilities using the PoD/gLite plug-in interface. In this paper we present the status of our investigations using the recently developed PoD/PanDA plug-in to enable PROOF and a real end-user ATLAS physics analysis as payload. For this work, data were accessed using two different protocols: XRootD and file protocol. The former in the site where the SRM interface is Disk Pool Manager (DPM) and the latter where the SRM interface is StoRM with GPFS file system. We will first describe the results of some benchmark tests we run on the ATLAS Italian Tier-1 and Tier-2s sites and at CERN. Then, we will compare the results of different types of analysis, comparing performances accessing data in relation to different types of SRM interfaces and accessing data with XRootD in the LAN and in the WAN using the ATLAS XROOTD storage federation infrastructure.

  19. Publicity in secured transactions law: Towards a European public notice filing system for non-possessory security rights in movable assets?

    NARCIS (Netherlands)

    Hamwijk, D.J.Y.

    2014-01-01

    There is a growing call to introduce a European public notice filing system for security rights in movable goods comparable to the notice filing system of Art. 9 UCC. A proposal to this effect has been adopted in Book IX DCFR, which represents a comprehensive framework of rules for proprietary

  20. On-Board File Management and Its Application in Flight Operations

    Science.gov (United States)

    Kuo, N.

    1998-01-01

    In this paper, the author presents the minimum functions required for an on-board file management system. We explore file manipulation processes and demonstrate how the file transfer along with the file management system will be utilized to support flight operations and data delivery.

  1. Clinical antibacterial effectiveness of the self-adjusting file system.

    Science.gov (United States)

    Neves, M A S; Rôças, I N; Siqueira, J F

    2014-04-01

    To evaluate in vivo the antibacterial effectiveness of the self-adjusting file (SAF) using molecular methods. Root canals from single-rooted teeth with apical periodontitis were instrumented using the SAF system under continuous irrigation with 2.5% NaOCl. DNA extracts from samples taken before and after instrumentation were subjected to quantitative analysis of total bacteria counts and levels of streptococci by quantitative real-time polymerase chain reaction (qPCR). The reverse-capture checkerboard assay was also used to identify 28 bacterial taxa before (S1) and after (S2) SAF instrumentation. SAF was also compared with a conventional hand nickel-titanium instrumentation technique for total bacterial reduction. Data from qPCR were analysed statistically within groups using the Wilcoxon matched pairs test and between groups using the Mann-Whitney U-test and the Fisher's exact test, with significance level set at P file significantly reduced the total bacterial counts from a mean number of 1.96 × 10(7) cells to 1.34 × 10(4) cells (P system was significantly superior to the 95.1% reduction obtained by hand instrumentation (P system succeeded in significantly reducing the streptococcal levels, but four cases still harboured these bacteria in S2. Checkerboard analysis revealed that not only streptococci but also some anaerobic and even as-yet-uncultivated bacteria may resist the effects of chemomechanical procedures. The SAF instrumentation system was highly effective in reducing bacterial populations from infected root canals and performed significantly better than hand instrumentation. However, because half of the samples still had detectable bacteria after preparation with SAF, supplementary disinfection is still required to maximize bacterial elimination. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  2. Effect of Instrumentation Length and Instrumentation Systems: Hand Versus Rotary Files on Apical Crack Formation – An In vitro Study

    Science.gov (United States)

    Mahesh, MC; Bhandary, Shreetha

    2017-01-01

    Introduction Stresses generated during root canal instrumentation have been reported to cause apical cracks. The smaller, less pronounced defects like cracks can later propagate into vertical root fracture, when the tooth is subjected to repeated stresses from endodontic or restorative procedures. Aim This study evaluated occurrence of apical cracks with stainless steel hand files, rotary NiTi RaCe and K3 files at two different instrumentation lengths. Materials and Methods In the present in vitro study, 60 mandibular premolars were mounted in resin blocks with simulated periodontal ligament. Apical 3 mm of the root surfaces were exposed and stained using India ink. Preoperative images of root apices were obtained at 100x using stereomicroscope. The teeth were divided into six groups of 10 each. First two groups were instrumented with stainless steel files, next two groups with rotary NiTi RaCe files and the last two groups with rotary NiTi K3 files. The instrumentation was carried out till the apical foramen (Working Length-WL) and 1 mm short of the apical foramen (WL-1) with each file system. After root canal instrumentation, postoperative images of root apices were obtained. Preoperative and postoperative images were compared and the occurrence of cracks was recorded. Descriptive statistical analysis and Chi-square tests were used to analyze the results. Results Apical root cracks were seen in 30%, 35% and 20% of teeth instrumented with K-files, RaCe files and K3 files respectively. There was no statistical significance among three instrumentation systems in the formation of apical cracks (p=0.563). Apical cracks were seen in 40% and 20% of teeth instrumented with K-files; 60% and 10% of teeth with RaCe files and 40% and 0% of teeth with K3 files at WL and WL-1 respectively. For groups instrumented with hand files there was no statistical significance in number of cracks at WL and WL-1 (p=0.628). But for teeth instrumented with RaCe files and K3 files

  3. 47 CFR 1.1704 - Station files.

    Science.gov (United States)

    2010-10-01

    ... System (COALS) § 1.1704 Station files. Applications, notifications, correspondence, electronic filings... Television Relay Service (CARS) are maintained by the Commission in COALS and the Public Reference Room...

  4. Ground-Based Global Navigation Satellite System GLONASS (GLObal NAvigation Satellite System) Combined Broadcast Ephemeris Data (daily files) from NASA CDDIS

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset consists of ground-based Global Navigation Satellite System (GNSS) GLONASS Combined Broadcast Ephemeris Data (daily files of all distinct navigation...

  5. 75 FR 68340 - Combined Notice of Filings # 1

    Science.gov (United States)

    2010-11-05

    ... Project, LP; Southern Company--Florida LLC. Description: Report of Non-Material Change in Estimated Coal... Energy Ohio, Inc. submits tariff filing per 35: Compliance Filing to be effective 7/29/2010. Filed Date..., Inc. Description: Midwest Independent Transmission System Operator, Inc. submits tariff filing per 35...

  6. Evaluation of apically extruded debris during root canal preparation in primary molar teeth using three different rotary systems and hand files.

    Science.gov (United States)

    Topçuoğlu, Gamze; Topçuoğlu, Hüseyin Sinan; Akpek, Firdevs

    2016-09-01

    To assess the amount of debris extruded apically during root canal preparation using various nickel titanium instrumentation systems and hand files in primary molar teeth. Sixty extracted primary first mandibular molar human teeth were randomly assigned to four groups (n = 15 teeth for each group). The canals were then instrumented with the following instrument systems: Revo-S, Mtwo, ProTaper Next, and hand files. Apically extruded debris during instrumentation was collected into pre-weighed Eppendorf tubes. The Eppendorf tubes were then stored in an incubator at 70°C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post-instrumentation weight of the Eppendorf tubes for each group. The data were analyzed using one-way analysis of variance (anova) and Tukey's post hoc tests. ProTaper Next files were associated with less apically extruded debris than the Mtwo, Revo-S, and hand files (P Hand files extruded more debris than Mtwo and Revo-S instruments (P 0.05). All instruments were associated with apical extrusion of debris. ProTaper Next files caused less debris extrusion compared to the other systems used. © 2015 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  7. Comparative Analysis of Canal Centering Ability of Different Single File Systems Using Cone Beam Computed Tomography- An In-Vitro Study.

    Science.gov (United States)

    Agarwal, Rolly S; Agarwal, Jatin; Jain, Pradeep; Chandra, Anil

    2015-05-01

    The ability of an endodontic instrument to remain centered in the root canal system is one of the most important characteristic influencing the clinical performance of a particular file system. Thus, it is important to assess the canal centering ability of newly introduced single file systems before they can be considered a viable replacement of full-sequence rotary file systems. The aim of the study was to compare the canal transportation, centering ability, and time taken for preparation of curved root canals after instrumentation with single file systems One Shape and Wave One, using cone-beam computed tomography (CBCT). Sixty mesiobuccal canals of mandibular molars with an angle of curvature ranging from 20(o) to 35(o) were divided into three groups of 20 samples each: ProTaper PT (group I) - full-sequence rotary control group, OneShape OS (group II)- single file continuous rotation, WaveOne WO - single file reciprocal motion (group III). Pre instrumentation and post instrumentation three-dimensional CBCT images were obtained from root cross-sections at 3mm, 6mm and 9mm from the apex. Scanned images were then accessed to determine canal transportation and centering ability. The data collected were evaluated using one-way analysis of variance (ANOVA) with Tukey's honestly significant difference test. It was observed that there were no differences in the magnitude of transportation between the rotary instruments (p >0.05) at both 3mm as well as 6mm from the apex. At 9 mm from the apex, Group I PT showed significantly higher mean canal transportation and lower centering ability (0.19±0.08 and 0.39±0.16), as compared to Group II OS (0.12±0.07 and 0.54±0.24) and Group III WO (0.13±0.06 and 0.55±0.18) while the differences between OS and WO were not statistically significant. It was concluded that there was minor difference between the tested groups. Single file systems demonstrated average canal transportation and centering ability comparable to full sequence

  8. Comparative Analysis of Canal Centering Ability of Different Single File Systems Using Cone Beam Computed Tomography- An In-Vitro Study

    Science.gov (United States)

    Agarwal, Jatin; Jain, Pradeep; Chandra, Anil

    2015-01-01

    Background The ability of an endodontic instrument to remain centered in the root canal system is one of the most important characteristic influencing the clinical performance of a particular file system. Thus, it is important to assess the canal centering ability of newly introduced single file systems before they can be considered a viable replacement of full-sequence rotary file systems. Aim The aim of the study was to compare the canal transportation, centering ability, and time taken for preparation of curved root canals after instrumentation with single file systems One Shape and Wave One, using cone-beam computed tomography (CBCT). Materials and Methods Sixty mesiobuccal canals of mandibular molars with an angle of curvature ranging from 20o to 35o were divided into three groups of 20 samples each: ProTaper PT (group I) – full-sequence rotary control group, OneShape OS (group II)- single file continuous rotation, WaveOne WO – single file reciprocal motion (group III). Pre instrumentation and post instrumentation three-dimensional CBCT images were obtained from root cross-sections at 3mm, 6mm and 9mm from the apex. Scanned images were then accessed to determine canal transportation and centering ability. The data collected were evaluated using one-way analysis of variance (ANOVA) with Tukey’s honestly significant difference test. Results It was observed that there were no differences in the magnitude of transportation between the rotary instruments (p >0.05) at both 3mm as well as 6mm from the apex. At 9 mm from the apex, Group I PT showed significantly higher mean canal transportation and lower centering ability (0.19±0.08 and 0.39±0.16), as compared to Group II OS (0.12±0.07 and 0.54±0.24) and Group III WO (0.13±0.06 and 0.55±0.18) while the differences between OS and WO were not statistically significant Conclusion It was concluded that there was minor difference between the tested groups. Single file systems demonstrated average canal

  9. Effect of coronal flaring on apical extrusion of debris during root canal instrumentation using single-file systems.

    Science.gov (United States)

    Topçuoğlu, H S; Üstün, Y; Akpek, F; Aktı, A; Topçuoğlu, G

    2016-09-01

    To evaluate the effect of coronal flaring on the amount of debris extruded apically during root canal preparation using the Reciproc, WaveOne (WO) and OneShape (OS) single-file systems. Ninety extracted single-rooted mandibular incisor teeth were randomly assigned to six groups (n = 15 for each group) for canal instrumentation. Endodontic access cavities were prepared in each tooth. In three of the six groups, coronal flaring was not performed; coronal flaring was performed with Gates-Glidden drills on all teeth in the remaining three groups. The canals were then instrumented with one or other of the following single-file instrument systems: Reciproc, WO and OS. Debris extruded apically during instrumentation was collected into pre-weighed Eppendorf tubes. The tubes were then stored in an incubator at 70 °C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post-instrumentation weight of the Eppendorf tubes for each group. Data were analysed using one-way analysis of variance (anova) and Tukey's post hoc tests (P = 0.05). Reciproc and WO files without coronal flaring produced significantly more debris compared with the other groups (P  0.05). All single-file systems caused apical extrusion of debris. Performing coronal flaring prior to canal preparation reduced the amount of apically extruded debris when using Reciproc or WO systems. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  10. Xbox one file system data storage: A forensic analysis

    OpenAIRE

    Gravel, Caitlin Elizabeth

    2015-01-01

    The purpose of this research was to answer the question, how does the file system of the Xbox One store data on its hard disk? This question is the main focus of the exploratory research and results sought. The research is focused on digital forensic investigators and experts. An out of the box Xbox One gaming console was used in the research. Three test cases were created as viable scenarios an investigator could come across in a search and seizure of evidence. The three test cases were then...

  11. 77 FR 60418 - Combined Notice of Filings

    Science.gov (United States)

    2012-10-03

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings...-1064-000. Applicants: Venice Gathering System, L.L.C. Description: NAESB 2.0 Compliance Filing to be...

  12. 77 FR 9226 - Physical Systems Integration, LLC; Supplemental Notice That Initial Market-Based Rate Filing...

    Science.gov (United States)

    2012-02-16

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-1013-000] Physical Systems Integration, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... Physical Systems Integration, LLC's application for market-based rate authority, with an accompanying rate...

  13. 75 FR 3939 - Merit Systems Protection Board (MSPB) Provides Notice of Opportunity To File Amicus Briefs

    Science.gov (United States)

    2010-01-25

    ... MERIT SYSTEMS PROTECTION BOARD Merit Systems Protection Board (MSPB) Provides Notice of Opportunity To File Amicus Briefs AGENCY: Merit Systems Protection Board. ACTION: Notice. SUMMARY: Pursuant to 5 U.S.C. 7521 and 5 CFR 1201.131, the Merit Systems Protection Board (MSPB) is providing notice of...

  14. Development of a utility system for nuclear reaction data file: WinNRDF

    International Nuclear Information System (INIS)

    Aoyama, Shigeyoshi; Ohbayasi, Yosihide; Masui, Hiroshi; Chiba, Masaki; Kato, Kiyoshi; Ohnishi, Akira

    2000-01-01

    A utility system, WinNRDF, is developed for charged particle nuclear reaction data of NRDF (Nuclear Reaction Data File) on the Windows interface. By using this system, we can easily search the experimental data of a charged particle nuclear reaction in NRDF than old retrieval systems on the mainframe and also see graphically the experimental data on GUI (Graphical User Interface). We adopted a mechanism of making a new index of keywords to put to practical use of the time dependent properties of the NRDF database. (author)

  15. 78 FR 14530 - Combined Notice of Filings #2

    Science.gov (United States)

    2013-03-06

    ...: California Independent System Operator Corporation submits tariff filing per 35.13(a)(2)(iii): 2013-02-27 Pay... per 35.17(b): 2013-02-28--OASIS Att J Errata to be effective 4/15/2013. Filed Date: 2/27/13. Accession... Due: 5 p.m. ET 3/20/13. The filings are accessible in the Commission's eLibrary system by clicking on...

  16. Design and Implementation of File Access and Control System Based on Dynamic Web

    Institute of Scientific and Technical Information of China (English)

    GAO Fuxiang; YAO Lan; BAO Shengfei; YU Ge

    2006-01-01

    A dynamic Web application, which can help the departments of enterprise to collaborate with each other conveniently, is proposed. Several popular design solutions are introduced at first. Then, dynamic Web system is chosen for developing the file access and control system. Finally, the paper gives the detailed process of the design and implementation of the system, which includes some key problems such as solutions of document management and system security. Additionally, the limitations of the system as well as the suggestions of further improvement are also explained.

  17. Ground-Based Global Navigation Satellite System Combined Broadcast Ephemeris Data (daily files) from NASA CDDIS

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset consists of ground-based Global Navigation Satellite System (GNSS) Combined Broadcast Ephemeris Data (daily files of all distinct navigation messages...

  18. Histological evaluation of the cleaning effectiveness of two reciprocating single-file systems in severely curved root canals: Reciproc versus WaveOne.

    Science.gov (United States)

    Carvalho, Maira de Souza; Junior, Emílio Carlos Sponchiado; Bitencourt Garrido, Angela Delfina; Roberti Garcia, Lucas da Fonseca; Franco Marques, André Augusto

    2015-01-01

    The aim of this study was to evaluate the cleaning effectiveness achieved with two reciprocating single-file systems in severely curved root canals: Reciproc and WaveOne. Twenty-five mesial roots of mandibular molars were randomly separated into two groups, according to the instrumentation system used. The negative control group consisted of five specimens that were not instrumented. The mesial canals (buccal and lingual) in Reciproc Group were instrumented with file R25 and the WaveOne group with the Primary file. The samples were submitted to histological processing and analyzed under a digital microscope. The WaveOne group presented a larger amount of debris than the Reciproc Group, however, without statistically significant difference (P > 0.05). A larger amount of debris in the control group was observed, with statistically significant difference to Reciproc and WaveOne groups (P file instrumentation systems presented similar effectiveness for root canal cleaning.

  19. Vertical Load Induced with Twisted File Adaptive System during Canal Shaping.

    Science.gov (United States)

    Jamleh, Ahmed; Alfouzan, Khalid

    2016-12-01

    To evaluate the vertical load induced with the Twisted File Adaptive (TFA; SybronEndo, Orange, CA) system during canal shaping of extracted teeth by comparing it with the Twisted File (TF, SybronEndo), ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), and ProTaper Universal (PTU, Dentsply Maillefer) systems. Fifty-two root canals were shaped using the TFA, TF, PTN, or PTU systems (n = 13 for each system). They were shaped gently according to the manufacturers' instructions. During canal shaping, vertical loads were recorded and shown in 2 directions, apically and coronally directed loads. The vertical peak loads of 3 instrumentation stages were used for comparison. The effects of rotary systems on the mean positive and negative peak loads were analyzed statistically using the Kruskal-Wallis and Mann-Whitney tests at a confidence level of 95%. The overall pattern of the instantaneous loads appeared to increase with the use of successive instruments within the system. During canal shaping in all groups, the apically and coronally directed peak loads ranged from 0.84-7.55 N and 2.16-2.79 N, respectively. There were significant differences in both peak loads among the tested systems at each instrumentation stage. TFA had the lowest apically directed peak loads. In terms of coronally directed peak loads, the TFA and TF had a significantly lower amount of loads developed with their instruments than PTN and PTU. The choice of instrument system had an influence on the loads developed during canal shaping. TFA instruments were associated favorably with the lowest values of peak loads followed by TF, PTN, and PTU. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  20. Shaping ability of the conventional nickel-titanium and reciprocating nickel-titanium file systems: a comparative study using micro-computed tomography.

    Science.gov (United States)

    Hwang, Young-Hye; Bae, Kwang-Shik; Baek, Seung-Ho; Kum, Kee-Yeon; Lee, WooCheol; Shon, Won-Jun; Chang, Seok Woo

    2014-08-01

    This study used micro-computed tomographic imaging to compare the shaping ability of Mtwo (VDW, Munich, Germany), a conventional nickel-titanium file system, and Reciproc (VDW), a reciprocating file system morphologically similar to Mtwo. Root canal shaping was performed on the mesiobuccal and distobuccal canals of extracted maxillary molars. In the RR group (n = 15), Reciproc was used in a reciprocating motion (150° counterclockwise/30° clockwise, 300 rpm); in the MR group, Mtwo was used in a reciprocating motion (150° clockwise/30° counterclockwise, 300 rpm); and in the MC group, Mtwo was used in a continuous rotating motion (300 rpm). Micro-computed tomographic images taken before and after canal shaping were used to analyze canal volume change and the degree of transportation at the cervical, middle, and apical levels. The time required for canal shaping was recorded. Afterward, each file was analyzed using scanning electron microscopy. No statistically significant differences were found among the 3 groups in the time for canal shaping or canal volume change (P > .05). Transportation values of the RR and MR groups were not significantly different at any level. However, the transportation value of the MC group was significantly higher than both the RR and MR groups at the cervical and apical levels (P file deformation was observed for 1 file in group RR (1/15), 3 files in group MR (3/15), and 5 files in group MC (5/15). In terms of shaping ability, Mtwo used in a reciprocating motion was not significantly different from the Reciproc system. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  1. Decay data file based on the ENSDF file

    Energy Technology Data Exchange (ETDEWEB)

    Katakura, J. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-03-01

    A decay data file with the JENDL (Japanese Evaluated Nuclear Data Library) format based on the ENSDF (Evaluated Nuclear Structure Data File) file was produced as a tentative one of special purpose files of JENDL. The problem using the ENSDF file as primary source data of the JENDL decay data file is presented. (author)

  2. A secure file manager for UNIX

    Energy Technology Data Exchange (ETDEWEB)

    DeVries, R.G.

    1990-12-31

    The development of a secure file management system for a UNIX-based computer facility with supercomputers and workstations is described. Specifically, UNIX in its usual form does not address: (1) Operation which would satisfy rigorous security requirements. (2) Online space management in an environment where total data demands would be many times the actual online capacity. (3) Making the file management system part of a computer network in which users of any computer in the local network could retrieve data generated on any other computer in the network. The characteristics of UNIX can be exploited to develop a portable, secure file manager which would operate on computer systems ranging from workstations to supercomputers. Implementation considerations making unusual use of UNIX features, rather than requiring extensive internal system changes, are described, and implementation using the Cray Research Inc. UNICOS operating system is outlined.

  3. Meant to make a difference, the clinical experience of minimally invasive endodontics with the self-adjusting file system in India.

    Science.gov (United States)

    Pawar, Ajinkya M; Pawar, Mansing G; Kokate, Sharad R

    2014-01-01

    The vital steps in any endodontic treatment are thorough mechanical shaping and chemical cleaning followed by obtaining a fluid tight impervious seal by an inert obturating material. For the past two decades, introduction and use of rotary nickel-titanium (Ni-Ti) files have changed our concepts of endodontic treatment from conventional to contemporary. They have reported good success rates, but still have many drawbacks. The Self-Adjusting File (SAF) introduces a new era in endodontics by performing the vital steps of shaping and cleaning simultaneously. The SAF is a hollow file in design that adapts itself three-dimensionally to the root canal and is a single file system, made up of Ni-Ti lattice. The case series presented in the paper report the clinical experience, while treating primary endodontic cases with the SAF system in India.

  4. Meant to make a difference, the clinical experience of minimally invasive endodontics with the self-adjusting file system in India

    Directory of Open Access Journals (Sweden)

    Ajinkya M Pawar

    2014-01-01

    Full Text Available The vital steps in any endodontic treatment are thorough mechanical shaping and chemical cleaning followed by obtaining a fluid tight impervious seal by an inert obturating material. For the past two decades, introduction and use of rotary nickel-titanium (Ni-Ti files have changed our concepts of endodontic treatment from conventional to contemporary. They have reported good success rates, but still have many drawbacks. The Self-Adjusting File (SAF introduces a new era in endodontics by performing the vital steps of shaping and cleaning simultaneously. The SAF is a hollow file in design that adapts itself three-dimensionally to the root canal and is a single file system, made up of Ni-Ti lattice. The case series presented in the paper report the clinical experience, while treating primary endodontic cases with the SAF system in India.

  5. Vibrations Generated by Several Nickel-titanium Endodontic File Systems during Canal Shaping in an Ex Vivo Model.

    Science.gov (United States)

    Choi, Dong-Min; Kim, Jin-Woo; Park, Se-Hee; Cho, Kyung-Mo; Kwak, Sang Won; Kim, Hyeon-Cheol

    2017-07-01

    This study aimed to compare the vibration generated by several nickel-titanium (NiTi) file systems and transmitted to teeth under 2 different motions (continuous rotation motion and reciprocating motion). Sixty J-shaped resin blocks (Endo Training Bloc-J; Dentsply Maillefer, Ballaigues, Switzerland) were trimmed to a root-shaped form and divided into 2 groups according to the types of electric motors: WaveOne motor (WOM, Dentsply Maillefer) and X-Smart Plus motor (XSM, Dentsply Maillefer). Each group was further subdivided into 3 subgroups (n = 10 each) according to the designated file systems: ProTaper Next (PTN, Dentsply Maillefer), ProTaper Universal (PTU, Dentsply Maillefer), and WaveOne (WOP, Dentsply Maillefer) systems. Vibration was measured during the pecking motion using an accelerometer attached to a predetermined consistent position. The average vibration values were subjected to 2-way analysis of variance as well as the t test and Duncan test for post hoc comparison at the 95% confidence interval. Both motor types and instrument types produced significantly different ranges of average vibrations. Regardless of the instrument types, the WOM group generated greater vibration than the XSM group (P file system may generate greater vibration than the continuous rotation NiTi file systems. The motor type also has a significant effect to amplify the vibrations. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  6. Use of WebDAV to Support a Virtual File System in a Coalition Environment

    National Research Council Canada - National Science Library

    Bradney, Jeremiah A

    2006-01-01

    .... By enabling the use of WebDAV in MYSEA, this thesis provides a means for fulfilling the above requirement for secure remote access by creating a virtual web-based file system accessible from the MYSEA MLS network...

  7. EPA FRS Facilities State Single File CSV Download

    Science.gov (United States)

    This page provides state comma separated value (CSV) files containing key information of all facilities and sites within the Facility Registry System (FRS). Each state zip file contains a single CSV file of key facility-level information.

  8. Cleaning capacity of hybrid instrumentation technique using reamer with alternating cutting edges system files: Histological analysis

    Directory of Open Access Journals (Sweden)

    Emilio Carlos Sponchiado Junior

    2014-01-01

    Full Text Available Aim: The aim of the following study is to evaluate the cleaning capacity of a hybrid instrumentation technique using Reamer with Alternating Cutting Edges (RaCe system files in the apical third of mesial roots of mandibular molars. Materials and Methods: Twenty teeth were selected and separated into two groups (n = 20 according to instrumentation technique as follows: BioRaCe - chemomechanical preparation with K-type files #10 and #15; and files BioRaCe BR0, BR1, BR2, BR3, and BR4; HybTec - hybrid instrumentation technique with K-type files #10 and #15 in the working length, #20 at 2 mm, #25 at 3 mm, cervical preparation with Largo burs #1 and #2; apical preparation with K-type files #15, #20, and #25 and RaCe files #25.04 and #30.04. The root canals were irrigated with 1 ml of 2.5% sodium hypochlorite at each change of instrument. The specimens were histologically processed and photographed under light optical microscope. The images were inserted onto an integration grid to count the amount of debris present in the root canal. Results: BioRaCe presented the highest percentage of debris in the apical third, however, with no statistically significant difference for HybTec (P > 0.05. Conclusions: The hybrid technique presented similar cleaning capacity as the technique recommended by the manufacturer.

  9. Influence of operator's experience on root canal shaping ability with a rotary nickel-titanium single-file reciprocating motion system.

    Science.gov (United States)

    Muñoz, Estefanía; Forner, Leopoldo; Llena, Carmen

    2014-04-01

    The aim of this study was to evaluate the influence of the operator's experience on the shaping of double-curvature simulated root canals with a nickel-titanium single-file reciprocating motion system. Sixty double-curvature root canals simulated in methacrylate blocks were prepared by 10 students without any experience in endodontics and by 10 professionals who had studied endodontics at the postgraduate level. The Reciproc-VDW system's R25 file was used in the root canal preparation. The blocks were photographed before and after the instrumentation, and the time of instrumentation was also evaluated. Changes in root canal dimensions were analyzed in 6 positions. Significant differences (P file reciprocating motion system Reciproc is not seen to be influenced by the operator's experience regarding the increase of the canal area. Previous training and the need to acquire experience are important in the use of this system, in spite of its apparent simplicity. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  10. Evaluated nuclear-data file for niobium

    International Nuclear Information System (INIS)

    Smith, A.B.; Smith, D.L.; Howerton, R.J.

    1985-03-01

    A comprehensive evaluated nuclear-data file for elemental niobium is provided in the ENDF/B format. This file, extending over the energy range 10 -11 -20 MeV, is suitable for comprehensive neutronic calculations, particulary those dealing with fusion-energy systems. It also provides dosimetry information. Attention is given to the internal consistancy of the file, energy balance, and the quantitative specification of uncertainties. Comparisons are made with experimental data and previous evaluated files. The results of integral tests are described and remaining outstanding problem areas are cited. 107 refs

  11. In vitro comparison rate of dental root canal transportation using two single file systems on the simulated resin blocks

    Directory of Open Access Journals (Sweden)

    Mohammad Javad Etesami

    2016-07-01

    Full Text Available Background and Aims: Cleaning and shaping is one of the most important stages in endodontic treatment. Single-file systems save time and reduce the risk of transmission of pathogens. This in vitro study was aimed to compare the rate of canal transportation after the preparation of the stimulated resin root canal with two single-file systems, namely Waveone and Reciproc. Materials and Methods: Thirty stimulated resin root canal blocks with size 8/0. 02 K file were randomly divided into two study groups. The preparation in Group A and Group B was performed using Reciproc and Waveone files, respectively. Pre and post- preparation photographs were taken and the images were superimposed to evaluate the inner and outer wall’s curvature tendency at three points (apical, middle and coronal using AutoCad pragram. Data were analyzed using T-test. Results: Based on the results, the degree of transportation in the inner and outer walls of the canal was less at the level of 3 millimeters (P0.05. Conclusion: Waveone showed better performance in the middle third of canal and this system maybe recommended.

  12. 48 CFR 750.7110-5 - Contract files.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contract files. 750.7110-5 Section 750.7110-5 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACT... Interests of the United States 750.7110-5 Contract files. The fully executed action memorandum indicating...

  13. Titanium-II: an evaluated nuclear data file

    International Nuclear Information System (INIS)

    Philis, C.; Howerton, R.; Smith, A.B.

    1977-06-01

    A comprehensive evaluated nuclear data file for elemental titanium is outlined including definition of the data base, the evaluation procedures and judgments, and the final evaluated results. The file describes all significant neutron-induced reactions with elemental titanium and the associated photon-production processes to incident neutron energies of 20.0 MeV. In addition, isotopic-reaction files, consistent with the elemental file, are separately defined for those processes which are important to applied considerations of material-damage and neutron-dosimetry. The file is formulated in the ENDF format. This report formally documents the evaluation and, together with the numerical file, is submitted for consideration as a part of the ENDF/B-V evaluated file system. 20 figures, 9 tables

  14. Comparative evaluation of debris extruded apically by using, Protaper retreatment file, K3 file and H-file with solvent in endodontic retreatment

    Directory of Open Access Journals (Sweden)

    Chetna Arora

    2012-01-01

    Full Text Available Aim: The aim of this study was to evaluate the apical extrusion of debris comparing 2 engine driven systems and hand instrumentation technique during root canal retreatment. Materials and Methods: Forty five human permanent mandibular premolars were prepared using the step-back technique, obturated with gutta-percha/zinc oxide eugenol sealer and cold lateral condensation technique. The teeth were divided into three groups: Group A: Protaper retreatment file, Group B: K3, file Group C: H-file with tetrachloroethylene. All the canals were irrigated with 20ml distilled water during instrumentation. Debris extruded along with the irrigating solution during retreatment procedure was carefully collected in preweighed Eppendorf tubes. The tubes were stored in an incubator for 5 days, placed in a desiccator and then re-weighed. Weight of dry debris was calculated by subtracting the weight of the tube before instrumentation and from the weight of the tube after instrumentation. Data was analyzed using Two Way ANOVA and Post Hoc test. Results : There was statistically significant difference in the apical extrusion of debris between hand instrumentation and protaper retreatment file and K3 file. The amount of extruded debris caused by protaper retreatment file and K3 file instrumentation technique was not statistically significant. All the three instrumentation techniques produced apically extruded debris and irrigant. Conclusion: The best way to minimize the extrusion of debris is by adapting crown down technique therefore the use of rotary technique (Protaper retreatment file, K3 file is recommended.

  15. Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography –An In Vitro Study

    Science.gov (United States)

    Dhingra, Annil; Miglani, Anjali

    2015-01-01

    Background Successful endodontic therapy depends on many factor, one of the most important step in any root canal treatment is root canal preparation. In addition, respecting the original shape of the canal is of the same importance; otherwise, canal aberrations such as transportation will be created. Aim The purpose of this study is to compare and evaluate Reciprocating WaveOne ,Reciproc and Rotary Oneshape Single File Instrumentation System On Cervical Dentin Thickness, Cross Sectional Area and Canal Transportation on First Mandibular Molar Using Cone Beam Computed Tomography. Materials and Methods Sixty Mandibular First Molars extracted due to periodontal reason was collected from the Department of Oral and Maxillofacial. Teeth were prepared using one rotary and two reciprocating single file system. Teeth were divided into 3 groups 20 teeth in each group. Pre instrumentation and Post instrumentation scans was done and evaluated for three parameters Canal Transportation, Cervical Dentinal Thickness, Cross-sectional Area. Results were analysed statistically using ANOVA, Post-Hoc Tukey analysis. Results The change in cross-sectional area after filing showed significant difference at 0mm, 1mm, 2mm and 7mm (pfile system over a distance of 7 mm (starting from 0mm and then evaluation at 1mm, 2mm, 3mm, 5mm and 7mm), the results showed a significant difference among the file systems at various lengths (p= 0.014, 0.046, 0.004, 0.028, 0.005 & 0.029 respectively). Mean value of cervical dentinal removal is maximum at all the levels for oneshape and minimum for waveone showing the better quality of waveone and reciproc over oneshape file system. Significant difference was found at 9mm, 11mm and 12mm between all the three file systems (p<0.001,< 0.001, <0.001). Conclusion It was concluded that reciprocating motion is better than rotary motion in all the three parameters Canal Transportation, Cross-sectional Area, Cervical Dentinal Thickness. PMID:26023639

  16. Manual versus computerized filing system in nuclear medicine - a regression. A simple but effectiv system for patient calling in in-vivo diagnosis

    International Nuclear Information System (INIS)

    Spitz, J.

    1985-01-01

    A patient-filing and calling system is described which uses colour-coded data carriers and a special board. The system proved to be useful for stock display and handling of labelled activity ready for injection in patients. (orig.) [de

  17. Influence of a glide path on apical extrusion of debris during canal preparation using single-file systems in curved canals.

    Science.gov (United States)

    Topçuoğlu, H S; Düzgün, S; Akpek, F; Topçuoğlu, G; Aktı, A

    2016-06-01

    To evaluate the effect of a glide path on the amount of apically extruded debris during canal preparation using single-file systems in curved canals. Ninety extracted mandibular molar teeth were randomly assigned to six groups (n = 15 for each group) for canal instrumentation. Endodontic access cavities were prepared in each tooth. In three of the six groups, a glide path was not created whereas a glide path was created using PathFile instruments on the mesial canals of all teeth in the remaining three groups. The mesial canals of the teeth were then instrumented with the following single-file instrument systems: WaveOne, Reciproc and OneShape. Debris extruded apically during instrumentation was collected into pre-weighed Eppendorf tubes. The tubes were then stored in an incubator at 70 °C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post-instrumentation weight of the Eppendorf tubes for each group. The data obtained were analysed using one-way analysis of variance (anova) and Tukey's post hoc tests. The OneShape file was associated with less debris extrusion than the Reciproc and WaveOne files when canal instrumentation was performed without a glide path (P files (P > 0.05). There was no significant difference amongst the OneShape, Reciproc and WaveOne files when a glide path was created before canal preparation in curved root canals (P > 0.05). All systems extruded significantly less debris in groups with a glide path than in groups without a glide path (P < 0.05). All instruments were associated with apical extrusion of debris. Creating a glide path prior to canal instrumentation reduced the amount of apically extruded debris in curved canals. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  18. Technological advances in endodontics: treatment of a mandibular molar with internal root resorption using a reciprocating single-file system.

    Science.gov (United States)

    de Souza, Samir Noronha; Marques, André Augusto Franco; Sponchiado-Júnior, EmÍlio Carlos; Roberti Garcia, Lucas da Fonseca; da Frota, Matheus Franco; de Carvalho, Fredson Márcio Acris

    2017-01-01

    The field of endodontics has become increasingly successful due to technological advances that allow clinicians to solve clinical cases that would have been problematic a few years ago. Despite such advances, endodontic treatment of teeth with internal root resorption remains challenging. This article presents a clinical case in which a reciprocating single-file system was used for endodontic treatment of a mandibular molar with internal root resorption. Radiographic examination revealed the presence of internal root resorption in the distobuccal root canal of the mandibular right first molar. A reciprocating single-file system was used for root canal instrumentation and final preparation, and filling was obtained through a thermal compaction technique. No painful symptoms or periapical lesions were observed in 12 months of follow-up. The results indicate that a reciprocating single-file system is an adequate alternative for root canal instrumentation, particularly in teeth with internal root resorption.

  19. Efficiency of the Self Adjusting File, WaveOne, Reciproc, ProTaper and hand files in root canal debridement.

    Science.gov (United States)

    Topcu, K Meltem; Karatas, Ertugrul; Ozsu, Damla; Ersoy, Ibrahim

    2014-07-01

    The aim of this study was to compare the canal debridement capabilities of three single file systems, ProTaper, and K-files in oval-shaped canals. Seventy-five extracted human mandibular central incisors with oval-shaped root canals were selected. A radiopaque contrast medium (Metapex; Meta Biomed Co. Ltd., Chungcheongbuk-do, Korea) was introduced into the canal systems and the self-adjusting file (SAF), WaveOne, Reciproc, ProTaper, and K-files were used for the instrumentation of the canals. The percentage of removed contrast medium was calculated using pre- and post-operative radiographs. An overall comparison between the groups revealed that the hand file (HF) and SAF groups presented the lowest percentage of removed contrast medium, whereas the WaveOne group showed the highest percentage (P ProTaper group removed more contrast medium than the SAF and HF groups (P < 0.05). None of the instruments was able to remove the contrast medium completely. WaveOne performed significantly better than other groups.

  20. 77 FR 71412 - Combined Notice of Filings #2

    Science.gov (United States)

    2012-11-30

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings 2 Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings: Filings Instituting Proceedings Docket Numbers: RP13-301-000. Applicants: Venice Gathering System, LLC...

  1. Parallel checksumming of data chunks of a shared data object using a log-structured file system

    Science.gov (United States)

    Bent, John M.; Faibish, Sorin; Grider, Gary

    2016-09-06

    Checksum values are generated and used to verify the data integrity. A client executing in a parallel computing system stores a data chunk to a shared data object on a storage node in the parallel computing system. The client determines a checksum value for the data chunk; and provides the checksum value with the data chunk to the storage node that stores the shared object. The data chunk can be stored on the storage node with the corresponding checksum value as part of the shared object. The storage node may be part of a Parallel Log-Structured File System (PLFS), and the client may comprise, for example, a Log-Structured File System client on a compute node or burst buffer. The checksum value can be evaluated when the data chunk is read from the storage node to verify the integrity of the data that is read.

  2. Secure Storage Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

    2015-01-01

    help with this issue, which are a particular instances of the more general challenge of efficient host/guest IO that is the focus of interfaces like virtio. A collection of bridging technologies have been identified in Chapter 4, which can be helpful to overcome the limitations and challenges of supporting efficient storage for secure enclaves. The synthesis of native filesystem security mechanisms and bridging technologies led to an isolation-centric storage architecture that is proposed in Chapter 5, which leverages isolation mechanisms from different layers to facilitate secure storage for an enclave. Recommendations: The following highlights recommendations from the investigations done thus far. - The Lustre filesystem offers excellent performance but does not support some security related features, e.g., encryption, that are included in GPFS. If encryption is of paramount importance, then GPFS may be a more suitable choice. - There are several possible Lustre related enhancements that may provide functionality of use for secure-enclaves. However, since these features are not currently integrated, the use of Lustre as a secure storage system may require more direct involvement (support). (*The network that connects the storage subsystem and users, e.g., Lustre s LNET.) - The use of OpenStack with GPFS will be more streamlined than with Lustre, as there are available drivers for GPFS. - The Manilla project offers Filesystem as a Service for OpenStack and is worth further investigation. Manilla has some support for GPFS. - The proposed Lustre enhancement of Dynamic-LNET should be further investigated to provide more dynamic changes to the storage network which could be used to isolate hosts and their tenants. - The Linux namespaces offer a good solution for creating efficient restrictions to shared HPC filesystems. However, we still need to conduct a thorough round of storage/filesystem benchmarks. - Vendor products should be more closely reviewed, possibly to

  3. File access prediction using neural networks.

    Science.gov (United States)

    Patra, Prashanta Kumar; Sahu, Muktikanta; Mohapatra, Subasish; Samantray, Ronak Kumar

    2010-06-01

    One of the most vexing issues in design of a high-speed computer is the wide gap of access times between the memory and the disk. To solve this problem, static file access predictors have been used. In this paper, we propose dynamic file access predictors using neural networks to significantly improve upon the accuracy, success-per-reference, and effective-success-rate-per-reference by using neural-network-based file access predictor with proper tuning. In particular, we verified that the incorrect prediction has been reduced from 53.11% to 43.63% for the proposed neural network prediction method with a standard configuration than the recent popularity (RP) method. With manual tuning for each trace, we are able to improve upon the misprediction rate and effective-success-rate-per-reference using a standard configuration. Simulations on distributed file system (DFS) traces reveal that exact fit radial basis function (RBF) gives better prediction in high end system whereas multilayer perceptron (MLP) trained with Levenberg-Marquardt (LM) backpropagation outperforms in system having good computational capability. Probabilistic and competitive predictors are the most suitable for work stations having limited resources to deal with and the former predictor is more efficient than the latter for servers having maximum system calls. Finally, we conclude that MLP with LM backpropagation algorithm has better success rate of file prediction than those of simple perceptron, last successor, stable successor, and best k out of m predictors.

  4. Archive Inventory Management System (AIMS) — A Fast, Metrics Gathering Framework for Validating and Gaining Insight from Large File-Based Data Archives

    Science.gov (United States)

    Verma, R. V.

    2018-04-01

    The Archive Inventory Management System (AIMS) is a software package for understanding the distribution, characteristics, integrity, and nuances of files and directories in large file-based data archives on a continuous basis.

  5. 76 FR 2368 - Balance Power Systems, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Science.gov (United States)

    2011-01-13

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER11-2331-000] Balance Power Systems, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for Blanket... proceeding of Balance Power Systems, LLC's application for market-based rate authority, with an accompanying...

  6. GEODOC: the GRID document file, record structure and data element description

    Energy Technology Data Exchange (ETDEWEB)

    Trippe, T.; White, V.; Henderson, F.; Phillips, S.

    1975-11-06

    The purpose of this report is to describe the information structure of the GEODOC file. GEODOC is a computer based file which contains the descriptive cataloging and indexing information for all documents processed by the National Geothermal Information Resource Group. This file (along with other GRID files) is managed by DBMS, the Berkeley Data Base Management System. Input for the system is prepared using the IRATE Text Editing System with its extended (12 bit) character set, or punched cards.

  7. Incidence of microcracks in maxillary first premolars after instrumentation with three different mechanized file systems: a comparative ex vivo study.

    Science.gov (United States)

    Kfir, A; Elkes, D; Pawar, A; Weissman, A; Tsesis, I

    2017-01-01

    The objective of this study is to determine the potential for microcracks in the radicular dentin of first maxillary premolars using three different mechanized endodontic instrumentation systems. Eighty extracted maxillary first premolars with two root canals and no externally visible microcracks were selected. Root canal instrumentation was performed with either the ProTaper file system, the WaveOne primary file, or the self-adjusting file (SAF). Teeth with intact roots served as controls. The roots were cut into segments and examined with an intensive, small-diameter light source that was applied diagonally to the entire periphery of the root slice under ×20 magnification; the presence of microcracks and fractures was recorded. Pearson's chi-square method was used for statistical analysis, and significance was set at p systems, respectively, while no microcracks were present in the roots treated with the SAF (p = 0.008 and p = 0.035, respectively). Intact teeth presented with cracks in 5 % of the roots. The intensive, small-diameter light source revealed microcracks that could not be detected when using the microscope's light alone. Within the limitations of this study, it could be concluded that mechanized root canal instrumentation with the ProTaper and WaveOne systems in maxillary first premolars causes microcracks in the radicular dentin, while the use of the SAF file causes no such microcracks. Rotary and reciprocating files with large tapers may cause microcracks in the radicular dentin of maxillary first premolars. Less aggressive methods should be considered for these teeth.

  8. Ground-Based Global Navigation Satellite System (GNSS) GPS Broadcast Ephemeris Data (daily files) from NASA CDDIS

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset consists of ground-based Global Navigation Satellite System (GNSS) GPS Broadcast Ephemeris Data (daily files) from the NASA Crustal Dynamics Data...

  9. Reliability analysis of a replication with limited number of journaling files

    International Nuclear Information System (INIS)

    Kimura, Mitsutaka; Imaizumi, Mitsuhiro; Nakagawa, Toshio

    2013-01-01

    Recently, replication mechanisms using journaling files have been widely used for the server systems. We have already discussed the model of asynchronous replication system using journaling files [8]. This paper formulates a stochastic model of a server system with replication considering the number of transmitting journaling files. The server updates the storage database and transmits the journaling file when a client requests the data update. The server transmits the database content to a backup site either at a constant time or after a constant number of transmitting journaling files. We derive the expected number of the replication and of transmitting journaling files. Further, we calculate the expected cost and discuss optimal replication interval to minimize it. Finally, numerical examples are given

  10. Apical Transportation, Centering Ability, and Cleaning Effectiveness of Reciprocating Single-file System Associated with Different Glide Path Techniques.

    Science.gov (United States)

    de Carvalho, Guilherme Moreira; Sponchiado Junior, Emílio Carlos; Garrido, Angela Delfina Bittencourt; Lia, Raphael Carlos Comelli; Garcia, Lucas da Fonseca Roberti; Marques, André Augusto Franco

    2015-12-01

    The aim of this study was to evaluate the apical transportation, the centering ability, and the cleaning effectiveness of a reciprocating single-file system associated to different glide path techniques. The mesial root canals of 52 mandibular molars were randomly distributed into 4 groups (n = 13) according to the different glide path techniques used before biomechanical preparation with Reciproc System (RS): KF/RS (sizes 10 and 15 K-files), NGP/RS (no glide path, only reciprocating system), PF/RS (sizes 13, 16, and 19 PathFile instruments), and NP (no preparation). Cone-beam computed tomography analysis was performed before and after instrumentation for apical third images acquisition. Apical transportation and its direction were evaluated by using the formula D = (X1 - X2) - (Y1 - Y2), and the centering ability was analyzed by the formula CC = (X1 - X2/Y1 - Y2 or Y1 - Y2/X1 - X2). The samples were submitted to histologic processing and analyzed under a digital microscope for debris quantification. The values were statistically analyzed (Kruskal-Wallis, the Dunn multiple comparisons test, P .05). Groups had a tendency toward transportation in the mesial direction. No technique had perfect centering ability (=1.0), with no significant difference among them. KF/RS had larger amount of debris, with statistically significant difference in comparison with NGP/RS (P > .05). The different glide path techniques promoted minimal apical transportation, and the reciprocating single-file system tested remained relatively centralized within the root canal. Also, the different techniques interfered in the cleaning effectiveness of the reciprocating system. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  11. Development of a user-centered radiology teaching file system

    Science.gov (United States)

    dos Santos, Marcelo; Fujino, Asa

    2011-03-01

    Learning radiology requires systematic and comprehensive study of a large knowledge base of medical images. In this work is presented the development of a digital radiology teaching file system. The proposed system has been created in order to offer a set of customized services regarding to users' contexts and their informational needs. This has been done by means of an electronic infrastructure that provides easy and integrated access to all relevant patient data at the time of image interpretation, so that radiologists and researchers can examine all available data to reach well-informed conclusions, while protecting patient data privacy and security. The system is presented such as an environment which implements a distributed clinical database, including medical images, authoring tools, repository for multimedia documents, and also a peer-reviewed model which assures dataset quality. The current implementation has shown that creating clinical data repositories on networked computer environments points to be a good solution in terms of providing means to review information management practices in electronic environments and to create customized and contextbased tools for users connected to the system throughout electronic interfaces.

  12. Evaluation of the Self-Adjusting File system (SAF) for the instrumentation of primary molar root canals: a micro-computed tomographic study.

    Science.gov (United States)

    Kaya, E; Elbay, M; Yiğit, D

    2017-06-01

    The Self-Adjusting File (SAF) system has been recommended for use in permanent teeth since it offers more conservative and effective root-canal preparation when compared to traditional rotary systems. However, no study had evaluated the usage of SAF in primary teeth. The aim of this study was to evaluate and compare the use of SAF, K file (manual instrumentation) and Profile (traditional rotary instrumentation) systems for primary-tooth root-canal preparation in terms of instrumentation time and amounts of dentin removed using micro-computed tomography (μCT) technology. Study Design: The study was conducted with 60 human primary mandibular second molar teeth divided into 3 groups according to instrumentation technique: Group I: SAF (n=20); Group II: K file (n=20); Group III; Profile (n=20). Teeth were embedded in acrylic blocks and scanned with a μCT scanner prior to instrumentation. All distal root canals were prepared up to size 30 for K file,.04/30 for Profile and 2 mm thickness, size 25 for SAF; instrumentation time was recorded for each tooth, and a second μCT scan was performed after instrumentation was complete. Amounts of dentin removed were measured using the three-dimensional images by calculating the difference in root-canal volume before and after preparation. Data was statistically analysed using the Kolmogorov-Smirnov and Kruskal-Wallis tests. Manual instrumentation (K file) resulted in significantly more dentin removal when compared to rotary instrumentation (Profile and SAF), while the SAF system generated significantly less dentin removal than both manual instrumentation (K file) and traditional rotary instrumentation (Profile) (psystems. Within the experimental conditions of the present study, the SAF seems as a useful system for root-canal instrumentation in primary molars because it removed less dentin than other systems, which is especially important for the relatively thin-walled canals of primary teeth, and because it involves less

  13. A Measurement Study of the Structured Overlay Network in P2P File-Sharing Systems

    Directory of Open Access Journals (Sweden)

    Mo Zhou

    2007-01-01

    Full Text Available The architecture of P2P file-sharing applications has been developing to meet the needs of large scale demands. The structured overlay network, also known as DHT, has been used in these applications to improve the scalability, and robustness of the system, and to make it free from single-point failure. We believe that the measurement study of the overlay network used in the real file-sharing P2P systems can provide guidance for the designing of such systems, and improve the performance of the system. In this paper, we perform the measurement in two different aspects. First, a modified client is designed to provide view to the overlay network from a single-user vision. Second, the instances of crawler programs deployed in many nodes managed to crawl the user information of the overlay network as much as possible. We also find a vulnerability in the overlay network, combined with the character of the DNS service, a more serious DDoS attack can be launched.

  14. Ground-Based Global Navigation Satellite System Mixed Broadcast Ephemeris Data (sub-hourly files) from NASA CDDIS

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset consists of ground-based Global Navigation Satellite System (GNSS) Mixed Broadcast Ephemeris Data (sub-hourly files) from the NASA Crustal Dynamics Data...

  15. Nodal aberration theory for wild-filed asymmetric optical systems

    Science.gov (United States)

    Chen, Yang; Cheng, Xuemin; Hao, Qun

    2016-10-01

    Nodal Aberration Theory (NAT) was used to calculate the zero field position in Full Field Display (FFD) for the given aberration term. Aiming at wide-filed non-rotational symmetric decentered optical systems, we have presented the nodal geography behavior of the family of third-order and fifth-order aberrations. Meanwhile, we have calculated the wavefront aberration expressions when one optical element in the system is tilted, which was not at the entrance pupil. By using a three-piece-cellphone lens example in optical design software CodeV, the nodal geography is testified under several situations; and the wavefront aberrations are calculated when the optical element is tilted. The properties of the nodal aberrations are analyzed by using Fringe Zernike coefficients, which are directly related with the wavefront aberration terms and usually obtained by real ray trace and wavefront surface fitting.

  16. 10 CFR 13.26 - Filing and service of papers.

    Science.gov (United States)

    2010-01-01

    ... found in the E-Filing Guidance and on the NRC Web site at http://www.nrc.gov/site-help/e-submittals.html... electronically to the E-Filing system. In addition, optical storage media (OSM) containing the entire filing must... document (e.g., motion to quash subpoena). (6) Filing is complete when the filer performs the last act that...

  17. 78 FR 67927 - Foreign Trade Regulations (FTR): Mandatory Automated Export System Filing for All Shipments...

    Science.gov (United States)

    2013-11-13

    ... Internet at [email protected] ). FOR FURTHER INFORMATION CONTACT: Nick Orsini, Chief, Foreign Trade Division... 0607-AA50 Foreign Trade Regulations (FTR): Mandatory Automated Export System Filing for All Shipments... approval of new information collection requirements. [[Page 67928

  18. NJOY99, Data Processing System of Evaluated Nuclear Data Files ENDF Format

    International Nuclear Information System (INIS)

    2000-01-01

    1 - Description of program or function: The NJOY nuclear data processing system is a modular computer code used for converting evaluated nuclear data in the ENDF format into libraries useful for applications calculations. Because the Evaluated Nuclear Data File (ENDF) format is used all around the world (e.g., ENDF/B-VI in the US, JEF-2.2 in Europe, JENDL-3.2 in Japan, BROND-2.2 in Russia), NJOY gives its users access to a wide variety of the most up-to-date nuclear data. NJOY provides comprehensive capabilities for processing evaluated data, and it can serve applications ranging from continuous-energy Monte Carlo (MCNP), through deterministic transport codes (DANT, ANISN, DORT), to reactor lattice codes (WIMS, EPRI). NJOY handles a wide variety of nuclear effects, including resonances, Doppler broadening, heating (KERMA), radiation damage, thermal scattering (even cold moderators), gas production, neutrons and charged particles, photo-atomic interactions, self shielding, probability tables, photon production, and high-energy interactions (to 150 MeV). Output can include printed listings, special library files for applications, and Postscript graphics (plus color). More information on NJOY is available from the developer's home page at http://t2.lanl.gov/tour/tourbus.html. Follow the Tourbus section of the Tour area to find notes from the ICTP lectures held at Trieste in March 2000 on the ENDF format and on the NJOY code. NJOY contains the following modules: NJOY directs the flow of data through the other modules and contains a library of common functions and subroutines used by the other modules. RECONR reconstructs pointwise (energy-dependent) cross sections from ENDF resonance parameters and interpolation schemes. BROADR Doppler broadens and thins pointwise cross sections. UNRESR computes effective self-shielded pointwise cross sections in the unresolved energy range. HEATR generates pointwise heat production cross sections (KERMA coefficients) and radiation

  19. The version control service for ATLAS data acquisition configuration files

    CERN Document Server

    Soloviev, Igor; The ATLAS collaboration

    2012-01-01

    To configure data taking session the ATLAS systems and detectors store more than 160 MBytes of data acquisition related configuration information in OKS XML files [1]. The total number of the files exceeds 1300 and they are updated by many system experts. In the past from time to time after such updates we had experienced problems caused by XML syntax errors or inconsistent state of files from a point of view of the overall ATLAS configuration. It was not always possible to know who made a modification causing problems or how to go back to a previous version of the modified file. Few years ago a special service addressing these issues has been implemented and deployed on ATLAS Point-1. It excludes direct write access to XML files stored in a central database repository. Instead, for an update the files are copied into a user repository, validated after modifications and committed using a version control system. The system's callback updates the central repository. Also, it keeps track of all modifications pro...

  20. 75 FR 54869 - Combined Notice of Filings 3

    Science.gov (United States)

    2010-09-09

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings 3 September 02, 2010. Take notice that the Commission has received the following Natural Gas Pipeline Rate and...: Venice Gathering System, L.L.C. Description: Venice Gathering System, L.L.C. submits tariff filing per...

  1. 77 FR 13114 - Combined Notice of Filings #1

    Science.gov (United States)

    2012-03-05

    .../12 Docket Numbers: ER12-1013-001 Applicants: Physical Systems Integration, LLC Description: Physical Systems Integration, LLC--Amendment to MBR Application to be effective 3/1/2012. Filed Date: 2/24/12... Market-Based Rate Tariff of Hampton Lumber Mills-Washington, Inc. Filed Date: 2/27/12 Accession Number...

  2. DATA Act File C Award Financial - Social Security

    Data.gov (United States)

    Social Security Administration — The DATA Act Information Model Schema Reporting Submission Specification File C. File C includes the agency award information from the financial accounting system at...

  3. Image Steganography of Multiple File Types with Encryption and Compression Algorithms

    Directory of Open Access Journals (Sweden)

    Ernest Andreigh C. Centina

    2017-05-01

    Full Text Available The goals of this study were to develop a system intended for securing files through the technique of image steganography integrated with cryptography by utilizing ZLIB Algorithm for compressing and decompressing secret files, DES Algorithm for encryption and decryption, and Least Significant Bit Algorithm for file embedding and extraction to avoid compromise on highly confidential files from exploits of unauthorized persons. Ensuing to this, the system is in acc ordance with ISO 9126 international quality standards. Every quality criteria of the system was evaluated by 10 Information Technology professionals, and the arithmetic Mean and Standard Deviation of the survey were computed. The result exhibits that m ost of them strongly agreed that the system is excellently effective based on Functionality, Reliability, Usability, Efficiency, Maintainability and Portability conformance to ISO 9126 standards. The system was found to be a useful tool for both governmen t agencies and private institutions for it could keep not only the message secret but also the existence of that particular message or file et maintaining the privacy of highly confidential and sensitive files from unauthorized access.

  4. 47 CFR 1.10007 - What applications can I file electronically?

    Science.gov (United States)

    2010-10-01

    ... International Bureau Filing System § 1.10007 What applications can I file electronically? (a) For a complete... the following formats: Word, Adobe Acrobat, Excel and Text. (c) For paper filing rules and procedures...

  5. 47 CFR 1.1113 - Filing locations.

    Science.gov (United States)

    2010-10-01

    ... by the ULS electronic filing system on FCC Form 159) and submit such number with the payment in order... received more than ten (10) days after electronic filing of an application on a Bureau/Office electronic... Television Relay Service (CARS) that are submitted electronically via the Cable Operations and Licensing...

  6. Derived virtual devices: a secure distributed file system mechanism

    Science.gov (United States)

    VanMeter, Rodney; Hotz, Steve; Finn, Gregory

    1996-01-01

    This paper presents the design of derived virtual devices (DVDs). DVDs are the mechanism used by the Netstation Project to provide secure shared access to network-attached peripherals distributed in an untrusted network environment. DVDs improve Input/Output efficiency by allowing user processes to perform I/O operations directly from devices without intermediate transfer through the controlling operating system kernel. The security enforced at the device through the DVD mechanism includes resource boundary checking, user authentication, and restricted operations, e.g., read-only access. To illustrate the application of DVDs, we present the interactions between a network-attached disk and a file system designed to exploit the DVD abstraction. We further discuss third-party transfer as a mechanism intended to provide for efficient data transfer in a typical NAP environment. We show how DVDs facilitate third-party transfer, and provide the security required in a more open network environment.

  7. Experience on QA in the CernVM File System

    CERN Multimedia

    CERN. Geneva; MEUSEL, Rene

    2015-01-01

    The CernVM-File System (CVMFS) delivers experiment software installations to thousands of globally distributed nodes in the WLCG and beyond. In recent years it became a mission-critical component for offline data processing of the LHC experiments and many other collaborations. From a software engineering perspective, CVMFS is a medium-sized C++ system-level project. Following the growth of the project, we introduced a number of measures to improve the code quality, testability, and maintainability. In particular, we found very useful code reviews through github pull requests and automated unit- and integration testing. We are also transitioning to a test-driven development for new features and bug fixes. These processes are supported by a number of tools, such as Google Test, Jenkins, Docker, and others. We would like to share our experience on problems we encountered and on which processes and tools worked well for us.

  8. An evaluated neutronic data file for elemental zirconium

    International Nuclear Information System (INIS)

    Smith, A.B.; Chiba, S.

    1994-09-01

    A comprehensive evaluated neutronic data file for elemental zirconium is derived and presented in the ENDF/B-VI formats. The derivation is based upon measured microscopic nuclear data, augmented by model calculations as necessary. The primary objective is a quality contemporary file suitable for fission-reactor development extending from conventional thermal to fast and innovative systems. This new file is a significant improvement over previously available evaluated zirconium files, in part, as a consequence of extensive new experimental measurements reported elsewhere

  9. Shaping ability of single-file reciprocating and heat-treated multifile rotary systems: a micro-CT study.

    Science.gov (United States)

    Marceliano-Alves, M F V; Sousa-Neto, M D; Fidel, S R; Steier, L; Robinson, J P; Pécora, J D; Versiani, M A

    2015-12-01

    To investigate changes in three-dimensional geometry, in various cross-sectional morphological parameters and in the centring ability of root canals prepared with different preparation systems using microcomputed tomographic imaging technology. Sixty-four mesial canals of mandibular molars were matched based on similar morphological dimensions using micro-CT evaluation and assigned to four experimental groups (n = 16), according to the canal preparation technique: Reciproc, WaveOne, Twisted File and HyFlex CM systems. Changes in several 2D (area, perimeter, form factor, roundness, minor and major diameter) and 3D [volume, surface area, structure model index (SMI)] morphological parameters, as well as canal transportation, were compared with preoperative values using Kruskal-Wallis and anovapost hoc Tukey's tests with the significance level set at 5%. Preparation significantly increased all tested parameters in the experimental groups. No significant differences were observed between groups regarding changes in volume, surface area, SMI, form factor and roundness of the root canal after preparation (P > 0.05). In the apical third, the Reciproc group had significantly greater changes in canal area, perimeter, major and minor diameters than the other groups (P File and HyFlex CM systems were associated with significantly less transportation than the reciprocating instruments, Reciproc and WaveOne (P File and HyFlex CM systems were able to maintain the original canal anatomy with less canal transportation than Reciproc and WaveOne; however, these differences are unlikely to be of clinical significance. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  10. 76 FR 55375 - Combined Notice of Filings

    Science.gov (United States)

    2011-09-07

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings..., September 12, 2011. Docket Numbers: RP11-2454-000. Applicants: Venice Gathering System, LLC. Description...

  11. 76 FR 39085 - Combined Notice of Filings

    Science.gov (United States)

    2011-07-05

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings..., July 05, 2011. Docket Numbers: RP11-2205-000. Applicants: Venice Gathering System, LLC. Description...

  12. SU-F-T-172: A Method for Log File QA On An IBA Proteus System for Patient Specific Spot Scanning Quality Assurance

    Energy Technology Data Exchange (ETDEWEB)

    Tang, S; Ho, M; Chen, C; Mah, D [ProCure NJ, Somerset, NJ (United States); Rice, I; Doan, D; Mac Rae, B [IBA, Somerset, NJ (United States)

    2016-06-15

    Purpose: The use of log files to perform patient specific quality assurance for both protons and IMRT has been established. Here, we extend that approach to a proprietary log file format and compare our results to measurements in phantom. Our goal was to generate a system that would permit gross errors to be found within 3 fractions until direct measurements. This approach could eventually replace direct measurements. Methods: Spot scanning protons pass through multi-wire ionization chambers which provide information about the charge, location, and size of each delivered spot. We have generated a program that calculates the dose in phantom from these log files and compares the measurements with the plan. The program has 3 different spot shape models: single Gaussian, double Gaussian and the ASTROID model. The program was benchmarked across different treatment sites for 23 patients and 74 fields. Results: The dose calculated from the log files were compared to those generate by the treatment planning system (Raystation). While the dual Gaussian model often gave better agreement, overall, the ASTROID model gave the most consistent results. Using a 5%–3 mm gamma with a 90% passing criteria and excluding doses below 20% of prescription all patient samples passed. However, the degree of agreement of the log file approach was slightly worse than that of the chamber array measurement approach. Operationally, this implies that if the beam passes the log file model, it should pass direct measurement. Conclusion: We have established and benchmarked a model for log file QA in an IBA proteus plus system. The choice of optimal spot model for a given class of patients may be affected by factors such as site, field size, and range shifter and will be investigated further.

  13. 75 FR 6728 - The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus...

    Science.gov (United States)

    2010-02-10

    ... MERIT SYSTEMS PROTECTION BOARD The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus Briefs in the Matters of Conyers v. Department of Defense, Docket No...: Merit Systems Protection Board. ACTION: Notice. SUMMARY: On January 25, 2010, the MSPB published in the...

  14. Files synchronization from a large number of insertions and deletions

    Science.gov (United States)

    Ellappan, Vijayan; Kumari, Savera

    2017-11-01

    Synchronization between different versions of files is becoming a major issue that most of the applications are facing. To make the applications more efficient a economical algorithm is developed from the previously used algorithm of “File Loading Algorithm”. I am extending this algorithm in three ways: First, dealing with non-binary files, Second backup is generated for uploaded files and lastly each files are synchronized with insertions and deletions. User can reconstruct file from the former file with minimizing the error and also provides interactive communication by eliminating the frequency without any disturbance. The drawback of previous system is overcome by using synchronization, in which multiple copies of each file/record is created and stored in backup database and is efficiently restored in case of any unwanted deletion or loss of data. That is, to introduce a protocol that user B may use to reconstruct file X from file Y with suitably low probability of error. Synchronization algorithms find numerous areas of use, including data storage, file sharing, source code control systems, and cloud applications. For example, cloud storage services such as Drop box synchronize between local copies and cloud backups each time users make changes to local versions. Similarly, synchronization tools are necessary in mobile devices. Specialized synchronization algorithms are used for video and sound editing. Synchronization tools are also capable of performing data duplication.

  15. Canal shaping with WaveOne Primary reciprocating files and ProTaper system: a comparative study.

    Science.gov (United States)

    Berutti, Elio; Chiandussi, Giorgio; Paolino, Davide Salvatore; Scotti, Nicola; Cantatore, Giuseppe; Castellucci, Arnaldo; Pasqualini, Damiano

    2012-04-01

    This study compared the canal curvature and axis modification after instrumentation with WaveOne Primary reciprocating files (Dentsply Maillefer, Ballaigues, Switzerland) and nickel-titanium (NiTi) rotary ProTaper (Dentsply Maillefer). Thirty ISO 15, 0.02 taper, Endo Training Blocks (Dentsply Maillefer) were used. In all specimens, the glide path was achieved with PathFile 1, 2, and 3 (Dentsply Maillefer) at the working length (WL). Specimens were then assigned to 1 of 2 groups for shaping: specimens in group 1 were shaped with ProTaper S1-S2-F1-F2 at the WL and specimens in group 2 were shaped with WaveOne Primary reciprocating files at the WL. Pre- and postinstrumentation digital images were superimposed and processed with Matlab r2010b (The MathWorks Inc, Natick, MA) software to analyze the curvature-radius ratio (CRr) and the relative axis error (rAe), representing canal curvature modification. Data were analyzed with one-way balanced analyses of variance at 2 levels (P < .05). The instrument factor was extremely significant for both the CRr parameter (F(1) = 9.59, P = .004) and the rAe parameter (F(1) = 13.55, P = .001). Canal modifications are reduced when the new WaveOne NiTi single-file system is used. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  16. 77 FR 71408 - Combined Notice of Filings

    Science.gov (United States)

    2012-11-30

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings....m. ET 12/3/12. Docket Numbers: RP13-301-000. Applicants: Venice Gathering System, LLC. Description...

  17. 78 FR 50408 - Combined Notice of Filings

    Science.gov (United States)

    2013-08-19

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings... Numbers: RP13-1239-000. Applicants: Venice Gathering System, L.L.C. Description: Order No. 776 Compliance...

  18. FRAMES User Defined Body Burden Concentration File Module Documentation

    International Nuclear Information System (INIS)

    Pelton, Mitchell A.; Rutz, Frederick C.; Eslinger, Melany A.; Gelston, Gariann M.

    2001-01-01

    The Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) Body Burden Concentration File (BBF) contains time-varying, instantaneous, constituent concentrations for body burden by contaminant. This report contains the requirements for this file and will be used by software engineers and testers to ensure that the file inputs properly.

  19. 77 FR 12367 - Agency Information Collection and Reporting Activities; Electronic Filing of Bank Secrecy Act...

    Science.gov (United States)

    2012-02-29

    ... capability of electronically filing BSA reports through its system called BSA E-Filing. Effective August 2011... Accounts (FBAR) report. BSA E-Filing is a secure, web-based electronic filing system. It is a flexible... filing institutions or individuals, thereby providing a significant improvement in data quality. BSA E...

  20. Apical extrusion of bacteria when using reciprocating single-file and rotary multifile instrumentation systems.

    Science.gov (United States)

    Tinoco, J M; De-Deus, G; Tinoco, E M B; Saavedra, F; Fidel, R A S; Sassone, L M

    2014-06-01

    To evaluate ex vivo, apical bacterial extrusion associated with two reciprocating single-file systems (WaveOne and Reciproc) compared with a conventional multifile rotary system (BioRace). Forty-five human single-rooted mandibular incisors were used. Endodontic access cavities were prepared, and root canals were contaminated with an Enterococcus faecalis suspension. Following incubation at 37 °C for thirty days, the contaminated teeth were divided into three groups of 15 specimens each (G1 - Reciproc, G2 - WaveOne and G3 - BioRace). Positive and negative controls consisted of 5 infected teeth and 3 uninfected incisors that were instrumented with one of the tested NiTi systems, respectively. Bacteria extruded from the apical foramen during instrumentation were collected into vials containing 0.9% NaCl. The microbiological samples were taken from the vials and incubated in brain heart agar medium for 24 h. The resulting bacterial titre, in colony-forming units (CFU) per mL, was determined, and these data were analysed by Wilcoxon matched-pairs signed rank test and Kruskal-Wallis H-test. The level of significance was set at α = 0.05. No significant difference was found in the number of CFU between the two reciprocating systems (P = 0.41). The conventional multifile rotary system group was associated with significantly higher CFU than both of the two reciprocating groups (P = 0.01). All instrumentation systems extruded bacteria beyond the foramen. However, both reciprocating single-file systems extruded fewer bacteria apically than the conventional multifile rotary system. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  1. 75 FR 25885 - The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus...

    Science.gov (United States)

    2010-05-10

    ... MERIT SYSTEMS PROTECTION BOARD The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus Briefs in the Matter of Larry L. Evans v. Department of Veterans Affairs, MSPB Docket Number AT-3330-09-0953- I-1. AGENCY: Merit Systems Protection Board. ACTION: Notice...

  2. 75 FR 20007 - The Merit Systems Protection Board (MSPB) Is Providing Notice of the Opportunity To File Amicus...

    Science.gov (United States)

    2010-04-16

    ... MERIT SYSTEMS PROTECTION BOARD The Merit Systems Protection Board (MSPB) Is Providing Notice of the Opportunity To File Amicus Briefs in the Matter of Hyginus U. Aguzie v. Office of Personnel Management, MSPB Docket Number DC-0731- 09-0261-R-1 AGENCY: Merit Systems Protection Board. ACTION: Notice...

  3. 75 FR 65467 - Combined Notice of Filings No. 1

    Science.gov (United States)

    2010-10-25

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings No. 1 October 19, 2010. Take notice that the Commission has received the following Natural Gas Pipeline Rate and...: Venice Gathering System, L.L.C. Description: Venice Gathering System, L.L.C. submits tariff filing per...

  4. 14 CFR 406.113 - Filing documents with the Docket Management System (DMS) and sending documents to the...

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Filing documents with the Docket Management System (DMS) and sending documents to the administrative law judge and Assistant Chief Counsel for... Management System (DMS) and sending documents to the administrative law judge and Assistant Chief Counsel for...

  5. A Centralized Control and Dynamic Dispatch Architecture for File Integrity Analysis

    Directory of Open Access Journals (Sweden)

    Ronald DeMara

    2006-02-01

    Full Text Available The ability to monitor computer file systems for unauthorized changes is a powerful administrative tool. Ideally this task could be performed remotely under the direction of the administrator to allow on-demand checking, and use of tailorable reporting and exception policies targeted to adjustable groups of network elements. This paper introduces M-FICA, a Mobile File Integrity and Consistency Analyzer as a prototype to achieve this capability using mobile agents. The M-FICA file tampering detection approach uses MD5 message digests to identify file changes. Two agent types, Initiator and Examiner, are used to perform file integrity tasks. An Initiator travels to client systems, computes a file digest, then stores those digests in a database file located on write-once media. An Examiner agent computes a new digest to compare with the original digests in the database file. Changes in digest values indicate that the file contents have been modified. The design and evaluation results for a prototype developed in the Concordia agent framework are described.

  6. Shaping Ability of Reciproc, WaveOne GOLD, and HyFlex EDM Single-file Systems in Simulated S-shaped Canals.

    Science.gov (United States)

    Özyürek, Taha; Yılmaz, Koray; Uslu, Gülşah

    2017-05-01

    The aim of the present study was to compare the shaping ability of Reciproc (RPC; VDW, Munich, Germany), HyFlex EDM (HEDM; Coltene/Whaledent AG, Altstätten, Switzerland), and WaveOne GOLD (WOG; Dentsply Maillefer, Ballaigues, Switzerland) nickel-titanium (NiTi) files made of different NiTi alloys in S-shaped simulated canals. Sixty S-shaped canals in resin blocks were prepared to an apical size of 0.25 mm using RPC R25, WOG Primary, and HEDM OneFile (n = 20 canal/per group) systems. Composite images were made from the superimposition of pre- and postinstrumentation images. The amount of resin removed by each system was measured using a digital template and image analysis software in 22 different points. Canal aberrations were also recorded. Data were statistically analyzed using the Kruskal-Wallis and post hoc Dunn tests at the 5% level. NiTi file fracture was not observed during shaping of the simulated canals although a danger zone formation in 1 sample and a ledge in 1 sample were observed in the RPC group. There was no statistically significant difference between the WOG and HEDM groups' apical, medial, and coronal regions (P > .05). However, it was determined that the RPC group removed a statistically significantly higher amount of resin from all the canal regions when compared with the WOG and HEDM groups (P < .05). Within the limitation of the present study, it was determined that all of the tested NiTi files caused various levels of resin removal. However, WOG and HEDM NiTi files were found to cause a lower level of resin removal than RPC NiTi files. Copyright © 2017 American Association of Endodontists. All rights reserved.

  7. Controlling P2P File-Sharing Networks Traffic

    OpenAIRE

    García Pineda, Miguel; HAMMOUMI, MOHAMMED; Canovas Solbes, Alejandro; Lloret, Jaime

    2011-01-01

    Since the appearance of Peer-To-Peer (P2P) file-sharing networks some time ago, many Internet users have chosen this technology to share and search programs, videos, music, documents, etc. The total number of P2P file-sharing users has been increasing and decreasing in the last decade depending on the creation or end of some well known P2P file-sharing systems. P2P file-sharing networks traffic is currently overloading some data networks and it is a major headache for netw...

  8. Patient Treatment File (PTF)

    Data.gov (United States)

    Department of Veterans Affairs — This database is part of the National Medical Information System (NMIS). The Patient Treatment File (PTF) contains a record for each inpatient care episode provided...

  9. Evaluated nuclear data file of Th-232

    International Nuclear Information System (INIS)

    Meadows, J.; Poenitz, W.; Smith, A.; Smith, D.; Whalen, J.; Howerton, R.

    1977-09-01

    An evaluated nuclear data file for thorium is described. The file extends over the energy range 0.049 (i.e., the inelastic-scattering threshold) to 20.0 MeV and is formulated within the framework of the ENDF system. The input data base, the evaluation procedures and judgments, and ancillary experiments carried out in conjunction with the evaluation are outlined. The file includes: neutron total cross sections, neutron scattering processes, neutron radiative capture cross sections, fission cross sections, (n;2n) and (n;3n) processes, fission properties (e.g., nu-bar and delayed neutron emission) and photon production processes. Regions of uncertainty are pointed out particularly where new measured results would be of value. The file is extended to thermal energies using previously reported resonance evaluations thereby providing a complete file for neutronic calculations. Integral data tests indicated that the file was suitable for neutronic calculations in the MeV range

  10. London SPAN version 4 parameter file format

    International Nuclear Information System (INIS)

    2004-06-01

    Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised trading system. Powernext SA collaborates with the clearing organization LCH.Clearnet SA to secure and facilitate the transactions. The French Standard Portfolio Analysis of Risk (SPAN) is a system used by LCH.Clearnet to calculate the initial margins from and for its clearing members. SPAN is a computerized system which calculates the impact of several possible variations of rates and volatility on by-product portfolios. The initial margin call is equal to the maximum probable loss calculated by the system. This document contains details of the format of the London SPAN version 4 parameter file. This file contains all the parameters and risk arrays required to calculate SPAN margins. London SPAN Version 4 is an upgrade from Version 3, which is also known as LME SPAN. This document contains the full revised file specification, highlighting the changes from Version 3 to Version 4

  11. JENDL special purpose file

    International Nuclear Information System (INIS)

    Nakagawa, Tsuneo

    1995-01-01

    In JENDL-3,2, the data on all the reactions having significant cross section over the neutron energy from 0.01 meV to 20 MeV are given for 340 nuclides. The object range of application extends widely, such as the neutron engineering, shield and others of fast reactors, thermal neutron reactors and nuclear fusion reactors. This is a general purpose data file. On the contrary to this, the file in which only the data required for a specific application field are collected is called special purpose file. The file for dosimetry is a typical special purpose file. The Nuclear Data Center, Japan Atomic Energy Research Institute, is making ten kinds of JENDL special purpose files. The files, of which the working groups of Sigma Committee are in charge, are listed. As to the format of the files, ENDF format is used similarly to JENDL-3,2. Dosimetry file, activation cross section file, (α, n) reaction data file, fusion file, actinoid file, high energy data file, photonuclear data file, PKA/KERMA file, gas production cross section file and decay data file are described on their contents, the course of development and their verification. Dosimetry file and gas production cross section file have been completed already. As for the others, the expected time of completion is shown. When these files are completed, they are opened to the public. (K.I.)

  12. Grid collector: An event catalog with automated file management

    International Nuclear Information System (INIS)

    Wu, Kesheng; Zhang, Wei-Ming; Sim, Alexander; Gu, Junmin; Shoshani, Arie

    2003-01-01

    High Energy Nuclear Physics (HENP) experiments such as STAR at BNL and ATLAS at CERN produce large amounts of data that are stored as files on mass storage systems in computer centers. In these files, the basic unit of data is an event. Analysis is typically performed on a selected set of events. The files containing these events have to be located, copied from mass storage systems to disks before analysis, and removed when no longer needed. These file management tasks are tedious and time consuming. Typically, all events contained in the files are read into memory before a selection is made. Since the time to read the events dominate the overall execution time, reading the unwanted event needlessly increases the analysis time. The Grid Collector is a set of software modules that works together to address these two issues. It automates the file management tasks and provides ''direct'' access to the selected events for analyses. It is currently integrated with the STAR analysis framework. The users can select events based on tags, such as, ''production date between March 10 and 20, and the number of charged tracks > 100.'' The Grid Collector locates the files containing relevant events, transfers the files across the Grid if necessary, and delivers the events to the analysis code through the familiar iterators. There has been some research efforts to address the file management issues, the Grid Collector is unique in that it addresses the event access issue together with the file management issues. This makes it more useful to a large variety of users

  13. Grid collector an event catalog with automated file management

    CERN Document Server

    Ke Sheng Wu; Sim, A; Jun Min Gu; Shoshani, A

    2004-01-01

    High Energy Nuclear Physics (HENP) experiments such as STAR at BNL and ATLAS at CERN produce large amounts of data that are stored as files on mass storage systems in computer centers. In these files, the basic unit of data is an event. Analysis is typically performed on a selected set of events. The files containing these events have to be located, copied from mass storage systems to disks before analysis, and removed when no longer needed. These file management tasks are tedious and time consuming. Typically, all events contained in the files are read into memory before a selection is made. Since the time to read the events dominate the overall execution time, reading the unwanted event needlessly increases the analysis time. The Grid Collector is a set of software modules that works together to address these two issues. It automates the file management tasks and provides "direct" access to the selected events for analyses. It is currently integrated with the STAR analysis framework. The users can select ev...

  14. Assessment of lung cell toxicity of various gasoline engine exhausts using a versatile in vitro exposure system.

    Science.gov (United States)

    Bisig, Christoph; Comte, Pierre; Güdel, Martin; Czerwinski, Jan; Mayer, Andreas; Müller, Loretta; Petri-Fink, Alke; Rothen-Rutishauser, Barbara

    2018-04-01

    Adverse effect studies of gasoline exhaust are scarce, even though gasoline direct injection (GDI) vehicles can emit a high number of particles. The aim of this study was to conduct an in vitro hazard assessment of different GDI exhausts using two different cell culture models mimicking the human airway. In addition to gasoline particle filters (GPF), the effects of two lubrication oils with low and high ash content were assessed, since it is known that oils are important contributors to exhaust emissions. Complete exhausts from two gasoline driven cars (GDI1 and GDI2) were applied for 6 h (acute exposure) to a multi-cellular human lung model (16HBE14o-cell line, macrophages, and dendritic cells) and a primary human airway model (MucilAir™). GDI1 vehicle was driven unfiltered and filtered with an uncoated and a coated GPF. GDI2 vehicle was driven under four settings with different fuels: normal unleaded gasoline, 2% high and low ash oil in gasoline, and 2% high ash oil in gasoline with a GPF. GDI1 unfiltered was also used for a repeated exposure (3 times 6 h) to assess possible adverse effects. After 6 h exposure, no genes or proteins for oxidative stress or pro-inflammation were upregulated compared to the filtered air control in both cell systems, neither in GDI1 with GPFs nor in GDI2 with the different fuels. However, the repeated exposure led to a significant increase in HMOX1 and TNFa gene expression in the multi-cellular model, showing the responsiveness of the system towards gasoline engine exhaust upon prolonged exposure. The reduction of particles by GPFs is significant and no adverse effects were observed in vitro during a short-term exposure. On the other hand, more data comparing different lubrication oils and their possible adverse effects are needed. Future experiments also should, as shown here, focus on repeated exposures. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  15. Global Navigation Satellite System (GNSS) Final Clock Product (5 minute resolution, daily files, generated weekly) from NASA CDDIS

    Data.gov (United States)

    National Aeronautics and Space Administration — This derived product set consists of Global Navigation Satellite System Final Satellite and Receiver Clock Product (5-minute granularity, daily files, generated...

  16. 11 CFR 100.19 - File, filed or filing (2 U.S.C. 434(a)).

    Science.gov (United States)

    2010-01-01

    ... a facsimile machine or by electronic mail if the reporting entity is not required to file..., including electronic reporting entities, may use the Commission's website's on-line program to file 48-hour... the reporting entity is not required to file electronically in accordance with 11 CFR 104.18. [67 FR...

  17. PUFF-IV, Code System to Generate Multigroup Covariance Matrices from ENDF/B-VI Uncertainty Files

    International Nuclear Information System (INIS)

    2007-01-01

    1 - Description of program or function: The PUFF-IV code system processes ENDF/B-VI formatted nuclear cross section covariance data into multigroup covariance matrices. PUFF-IV is the newest release in this series of codes used to process ENDF uncertainty information and to generate the desired multi-group correlation matrix for the evaluation of interest. This version includes corrections and enhancements over previous versions. It is written in Fortran 90 and allows for a more modular design, thus facilitating future upgrades. PUFF-IV enhances support for resonance parameter covariance formats described in the ENDF standard and now handles almost all resonance parameter covariance information in the resolved region, with the exception of the long range covariance sub-subsections. PUFF-IV is normally used in conjunction with an AMPX master library containing group averaged cross section data. Two utility modules are included in this package to facilitate the data interface. The module SMILER allows one to use NJOY generated GENDF files containing group averaged cross section data in conjunction with PUFF-IV. The module COVCOMP allows one to compare two files written in COVERX format. 2 - Methods: Cross section and flux values on a 'super energy grid,' consisting of the union of the required energy group structure and the energy data points in the ENDF/B-V file, are interpolated from the input cross sections and fluxes. Covariance matrices are calculated for this grid and then collapsed to the required group structure. 3 - Restrictions on the complexity of the problem: PUFF-IV cannot process covariance information for energy and angular distributions of secondary particles. PUFF-IV does not process covariance information in Files 34 and 35; nor does it process covariance information in File 40. These new formats will be addressed in a future version of PUFF

  18. Design of housing file box of fire academy based on RFID

    Science.gov (United States)

    Li, Huaiyi

    2018-04-01

    This paper presents a design scheme of intelligent file box based on RFID. The advantages of RFID file box and traditional file box are compared and analyzed, and the feasibility of RFID file box design is analyzed based on the actual situation of our university. After introducing the shape and structure design of the intelligent file box, the paper discusses the working process of the file box, and explains in detail the internal communication principle of the RFID file box and the realization of the control system. The application of the RFID based file box will greatly improve the efficiency of our school's archives management.

  19. File Type Identification of File Fragments using Longest Common Subsequence (LCS)

    Science.gov (United States)

    Rahmat, R. F.; Nicholas, F.; Purnamawati, S.; Sitompul, O. S.

    2017-01-01

    Computer forensic analyst is a person in charge of investigation and evidence tracking. In certain cases, the file needed to be presented as digital evidence was deleted. It is difficult to reconstruct the file, because it often lost its header and cannot be identified while being restored. Therefore, a method is required for identifying the file type of file fragments. In this research, we propose Longest Common Subsequences that consists of three steps, namely training, testing and validation, to identify the file type from file fragments. From all testing results we can conlude that our proposed method works well and achieves 92.91% of accuracy to identify the file type of file fragment for three data types.

  20. 49 CFR 564.5 - Information filing; agency processing of filings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Information filing; agency processing of filings... HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REPLACEABLE LIGHT SOURCE INFORMATION (Eff. until 12-01-12) § 564.5 Information filing; agency processing of filings. (a) Each manufacturer...

  1. The version control service for the ATLAS data acquisition configuration files

    International Nuclear Information System (INIS)

    Soloviev, Igor

    2012-01-01

    The ATLAS experiment at the LHC in Geneva uses a complex and highly distributed Trigger and Data Acquisition system, involving a very large number of computing nodes and custom modules. The configuration of the system is specified by schema and data in more than 1000 XML files, with various experts responsible for updating the files associated with their components. Maintaining an error free and consistent set of XML files proved a major challenge. Therefore a special service was implemented; to validate any modifications; to check the authorization of anyone trying to modify a file; to record who had made changes, plus when and why; and to provide tools to compare different versions of files and to go back to earlier versions if required. This paper provides details of the implementation and exploitation experience, that may be interesting for other applications using many human-readable files maintained by different people, where consistency of the files and traceability of modifications are key requirements.

  2. The INFN-CNAF Tier-1 GEMSS Mass Storage System and database facility activity

    Science.gov (United States)

    Ricci, Pier Paolo; Cavalli, Alessandro; Dell'Agnello, Luca; Favaro, Matteo; Gregori, Daniele; Prosperini, Andrea; Pezzi, Michele; Sapunenko, Vladimir; Zizzi, Giovanni; Vagnoni, Vincenzo

    2015-05-01

    The consolidation of Mass Storage services at the INFN-CNAF Tier1 Storage department that has occurred during the last 5 years, resulted in a reliable, high performance and moderately easy-to-manage facility that provides data access, archive, backup and database services to several different use cases. At present, the GEMSS Mass Storage System, developed and installed at CNAF and based upon an integration between the IBM GPFS parallel filesystem and the Tivoli Storage Manager (TSM) tape management software, is one of the largest hierarchical storage sites in Europe. It provides storage resources for about 12% of LHC data, as well as for data of other non-LHC experiments. Files are accessed using standard SRM Grid services provided by the Storage Resource Manager (StoRM), also developed at CNAF. Data access is also provided by XRootD and HTTP/WebDaV endpoints. Besides these services, an Oracle database facility is in production characterized by an effective level of parallelism, redundancy and availability. This facility is running databases for storing and accessing relational data objects and for providing database services to the currently active use cases. It takes advantage of several Oracle technologies, like Real Application Cluster (RAC), Automatic Storage Manager (ASM) and Enterprise Manager centralized management tools, together with other technologies for performance optimization, ease of management and downtime reduction. The aim of the present paper is to illustrate the state-of-the-art of the INFN-CNAF Tier1 Storage department infrastructures and software services, and to give a brief outlook to forthcoming projects. A description of the administrative, monitoring and problem-tracking tools that play a primary role in managing the whole storage framework is also given.

  3. GIFT: an HEP project for file transfer

    International Nuclear Information System (INIS)

    Ferrer, M.L.; Mirabelli, G.; Valente, E.

    1986-01-01

    Started in autumn 1983, GIFT (General Internetwork File Transfer) is a collaboration among several HEP centers, including CERN, Frascati, Oslo, Oxford, RAL and Rome. The collaboration was initially set up with the aim of studying the feasibility of a software system to allow direct file exchange between computers which do not share a common Virtual File Protocol. After the completion of this first phase, an implementation phase started and, since March 1985, an experimental service based on this system has been running at CERN between DECnet, CERNET and the UK Coloured Book protocols. The authors present the motivations that, together with previous gateway experiences, led to the definition of GIFT specifications and to the implementation of the GIFT Kernel system. The position of GIFT in the overall development framework of the networking facilities needed by large international collaborations within the HEP community is explained. (Auth.)

  4. Grid collector: An event catalog with automated file management

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Zhang, Wei-Ming; Sim, Alexander; Gu, Junmin; Shoshani, Arie

    2003-10-17

    High Energy Nuclear Physics (HENP) experiments such as STAR at BNL and ATLAS at CERN produce large amounts of data that are stored as files on mass storage systems in computer centers. In these files, the basic unit of data is an event. Analysis is typically performed on a selected set of events. The files containing these events have to be located, copied from mass storage systems to disks before analysis, and removed when no longer needed. These file management tasks are tedious and time consuming. Typically, all events contained in the files are read into memory before a selection is made. Since the time to read the events dominate the overall execution time, reading the unwanted event needlessly increases the analysis time. The Grid Collector is a set of software modules that works together to address these two issues. It automates the file management tasks and provides ''direct'' access to the selected events for analyses. It is currently integrated with the STAR analysis framework. The users can select events based on tags, such as, ''production date between March 10 and 20, and the number of charged tracks > 100.'' The Grid Collector locates the files containing relevant events, transfers the files across the Grid if necessary, and delivers the events to the analysis code through the familiar iterators. There has been some research efforts to address the file management issues, the Grid Collector is unique in that it addresses the event access issue together with the file management issues. This makes it more useful to a large variety of users.

  5. Recalling ISX shot data files from the off-line archive

    International Nuclear Information System (INIS)

    Stanton, J.S.

    1981-02-01

    This document describes a set of computer programs designed to allow access to ISX shot data files stored on off-line disk packs. The programs accept user requests for data files and build a queue of end requests. When an operator is available to mount the necessary disk packs, the system copies the requested files to an on-line disk area. The program runs on the Fusion Energy Division's DECsystem-10 computer. The request queue is implemented under the System 1022 data base management system. The support programs are coded in MACRO-10 and FORTRAN-10

  6. Modeling of the interplay between single-file diffusion and conversion reaction in mesoporous systems

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jing [Iowa State Univ., Ames, IA (United States)

    2013-01-11

    We analyze the spatiotemporal behavior of species concentrations in a diffusion-mediated conversion reaction which occurs at catalytic sites within linear pores of nanometer diameter. A strict single-file (no passing) constraint occurs in the diffusion within such narrow pores. Both transient and steady-state behavior is precisely characterized by kinetic Monte Carlo simulations of a spatially discrete lattice–gas model for this reaction–diffusion process considering various distributions of catalytic sites. Exact hierarchical master equations can also be developed for this model. Their analysis, after application of mean-field type truncation approximations, produces discrete reaction–diffusion type equations (mf-RDE). For slowly varying concentrations, we further develop coarse-grained continuum hydrodynamic reaction–diffusion equations (h-RDE) incorporating a precise treatment of single-file diffusion (SFD) in this multispecies system. Noting the shortcomings of mf-RDE and h-RDE, we then develop a generalized hydrodynamic (GH) formulation of appropriate gh-RDE which incorporates an unconventional description of chemical diffusion in mixed-component quasi-single-file systems based on a refined picture of tracer diffusion for finite-length pores. The gh-RDE elucidate the non-exponential decay of the steady-state reactant concentration into the pore and the non-mean-field scaling of the reactant penetration depth. Then an extended model of a catalytic conversion reaction within a functionalized nanoporous material is developed to assess the effect of varying the reaction product – pore interior interaction from attractive to repulsive. The analysis is performed utilizing the generalized hydrodynamic formulation of the reaction-diffusion equations which can reliably capture the complex interplay between reaction and restricted transport for both irreversible and reversible reactions.

  7. Detection Of Alterations In Audio Files Using Spectrograph Analysis

    Directory of Open Access Journals (Sweden)

    Anandha Krishnan G

    2015-08-01

    Full Text Available The corresponding study was carried out to detect changes in audio file using spectrograph. An audio file format is a file format for storing digital audio data on a computer system. A sound spectrograph is a laboratory instrument that displays a graphical representation of the strengths of the various component frequencies of a sound as time passes. The objectives of the study were to find the changes in spectrograph of audio after altering them to compare altering changes with spectrograph of original files and to check for similarity and difference in mp3 and wav. Five different alterations were carried out on each audio file to analyze the differences between the original and the altered file. For altering the audio file MP3 or WAV by cutcopy the file was opened in Audacity. A different audio was then pasted to the audio file. This new file was analyzed to view the differences. By adjusting the necessary parameters the noise was reduced. The differences between the new file and the original file were analyzed. By adjusting the parameters from the dialog box the necessary changes were made. The edited audio file was opened in the software named spek where after analyzing a graph is obtained of that particular file which is saved for further analysis. The original audio graph received was combined with the edited audio file graph to see the alterations.

  8. 10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

    Science.gov (United States)

    2010-01-01

    ... through the E-Filing system written testimony or hearing exhibits in advance of a hearing, the written... for filing. 2.304 Section 2.304 Energy NUCLEAR REGULATORY COMMISSION RULES OF PRACTICE FOR DOMESTIC...; signatures; acceptance for filing. (a) Docket numbers and titles. Each document filed in an adjudication to...

  9. 75 FR 33294 - Combined Notice of Filings No. 1

    Science.gov (United States)

    2010-06-11

    ...: Columbia Gulf Transmission Company submits tariff filing per 154.204: IFF Compliance to be effective 7/1.... The filings in the above proceedings are accessible in the Commission's eLibrary system by clicking on...

  10. Comparison of three digital radiographic imaging systems for the visibility of endodontic files

    International Nuclear Information System (INIS)

    Park, Jong Won; Kim, Eun Kyung; Han, Won Jeong

    2004-01-01

    To compare three digital radiographic imaging sensors by evaluating the visibility of endodontic file tips with interobserver reproducibility and assessing subjectively the clarity of images in comparison with the x-ray film images. Forty-five extracted sound premolars were used for this study. Fifteen plaster blocks were made with three premolars each and 8, 10, 15 K-flexofiles were inserted into the root canal of premolars. They were radiographically exposed using periapical x-ray films (Kodak Insight Dental film, Eastmann Kodak company, Rochester, USA), Digora imaging plates (Soredex-Orion Co., Helsinki, Finland), CDX 2000HQ sensors (Biomedisys Co., Seoul, Korea), and CDR sensors (Schick Inc., Long Island, USA). The visibility of endodontic files was evaluated with interobserver reproducibility, which was calculated as the standard deviations of X, Y coordinated of endodontic file tips measured on digital images by three oral and maxillofacial radiologists. The clarity of images was assessed subjectively using 3 grades, i.e, plus, equal, and minus in comparison with the conventional x-ray film images. Interobserver reproducibility of endodontic file tips was the highest in CDR sensor (p<0.05) only except at Y coordinates of 15 file. In the subjective assessment of the image clarity, the plus grade was the most frequent in CDR sensor at all size of endodontic file (p<0.05). CDR sensor was the most superior to the other sensors, CDX 2000HQ sensor and Digora imaging plate in the evaluation of interobserver reproducibility of endodontic file tip and subjective assessment of image clarity.

  11. Efficacy of ProTaper universal retreatment files in removing filling materials during root canal retreatment.

    Science.gov (United States)

    Giuliani, Valentina; Cocchetti, Roberto; Pagavino, Gabriella

    2008-11-01

    The aim of this study was to evaluate the efficacy of the ProTaper Universal System rotary retreatment system and of Profile 0.06 and hand instruments (K-file) in the removal of root filling materials. Forty-two extracted single-rooted anterior teeth were selected. The root canals were enlarged with nickel-titanium (NiTi) rotary files, filled with gutta-percha and sealer, and randomly divided into 3 experimental groups. The filling materials were removed with solvent in conjunction with one of the following devices and techniques: the ProTaper Universal System for retreatment, ProFile 0.06, and hand instruments (K-file). The roots were longitudinally sectioned, and the image of the root surface was photographed. The images were captured in JPEG format; the areas of the remaining filling materials and the time required for removing the gutta-percha and sealer were calculated by using the nonparametric one-way Kruskal-Wallis test and Tukey-Kramer tests, respectively. The group that showed better results for removing filling materials was the ProTaper Universal System for retreatment files, whereas the group of ProFile rotary instruments yielded better root canal cleanliness than the hand instruments, even though there was no statistically significant difference. The ProTaper Universal System for retreatment and ProFile rotary instruments worked significantly faster than the K-file. The ProTaper Universal System for retreatment files left cleaner root canal walls than the K-file hand instruments and the ProFile Rotary instruments, although none of the devices used guaranteed complete removal of the filling materials. The rotary NiTi system proved to be faster than hand instruments in removing root filling materials.

  12. Dynamic file-access characteristics of a production parallel scientific workload

    Science.gov (United States)

    Kotz, David; Nieuwejaar, Nils

    1994-01-01

    Multiprocessors have permitted astounding increases in computational performance, but many cannot meet the intense I/O requirements of some scientific applications. An important component of any solution to this I/O bottleneck is a parallel file system that can provide high-bandwidth access to tremendous amounts of data in parallel to hundreds or thousands of processors. Most successful systems are based on a solid understanding of the expected workload, but thus far there have been no comprehensive workload characterizations of multiprocessor file systems. This paper presents the results of a three week tracing study in which all file-related activity on a massively parallel computer was recorded. Our instrumentation differs from previous efforts in that it collects information about every I/O request and about the mix of jobs running in a production environment. We also present the results of a trace-driven caching simulation and recommendations for designers of multiprocessor file systems.

  13. 48 CFR 30.202-5 - Filing disclosure statements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Filing disclosure... GENERAL CONTRACTING REQUIREMENTS COST ACCOUNTING STANDARDS ADMINISTRATION CAS Program Requirements 30.202-5 Filing disclosure statements. See 48 CFR 9903.202-5 (FAR appendix). [61 FR 18917, Apr. 29, 1996...

  14. Distributed metadata servers for cluster file systems using shared low latency persistent key-value metadata store

    Science.gov (United States)

    Bent, John M.; Faibish, Sorin; Pedone, Jr., James M.; Tzelnic, Percy; Ting, Dennis P. J.; Ionkov, Latchesar A.; Grider, Gary

    2017-12-26

    A cluster file system is provided having a plurality of distributed metadata servers with shared access to one or more shared low latency persistent key-value metadata stores. A metadata server comprises an abstract storage interface comprising a software interface module that communicates with at least one shared persistent key-value metadata store providing a key-value interface for persistent storage of key-value metadata. The software interface module provides the key-value metadata to the at least one shared persistent key-value metadata store in a key-value format. The shared persistent key-value metadata store is accessed by a plurality of metadata servers. A metadata request can be processed by a given metadata server independently of other metadata servers in the cluster file system. A distributed metadata storage environment is also disclosed that comprises a plurality of metadata servers having an abstract storage interface to at least one shared persistent key-value metadata store.

  15. Coexistence of graph-oriented and relational data file organisations in a data bank system

    International Nuclear Information System (INIS)

    Engel, K.D.

    1980-01-01

    It is shown that a coexistence of hierarchical and relational data bank structures in computer networks in a common data bank system is possible. This coexistence model, first established by NIJSSEN, regards the graph theory CODASYL approach and CODD's relational model as graph-oriented, or rather table-oriented, data file organisation as presented to the user of a common logical structure of the data bank. (WB) [de

  16. Status of the evaluated nuclear structure data file

    International Nuclear Information System (INIS)

    Martin, M.J.

    1991-01-01

    The structure, organization, and contents of the Evaluated Nuclear Structure Data File (ENSDF) are discussed in this paper. This file contains a summary of the state of experimental nuclear structure data for all nuclides as determined from consideration of measurements reported worldwide in the literature. Special emphasis is given to the data evaluation procedures, the consistency checks, and the quality control utilized at the input stage and to the retrieval capabilities of the system at the output stage. Recent enhancements of the on-line interaction with the file contents is addressed as well as procedural changes that will improve the currency of the file

  17. 78 FR 67355 - Combined Notice of Filings #2

    Science.gov (United States)

    2013-11-12

    ... Edison Company submits SGIA and Distribution Service Agmt with NRG Solar Blythe II LLC to be effective 12... submits BPA Trans System Interconnection Agmt--Wine Country to be effective 12/31/2013. Filed Date: 10/31... detailed information relating to filing requirements, interventions, protests, service, and qualifying...

  18. File sharing

    NARCIS (Netherlands)

    van Eijk, N.

    2011-01-01

    File sharing’ has become generally accepted on the Internet. Users share files for downloading music, films, games, software etc. In this note, we have a closer look at the definition of file sharing, the legal and policy-based context as well as enforcement issues. The economic and cultural

  19. Particulate Emissions Control using Advanced Filter Systems: Final Report for Argonne National Laboratory, Corning Inc. and Hyundai Motor Company CRADA Project

    Energy Technology Data Exchange (ETDEWEB)

    Seong, Hee Je [Argonne National Lab. (ANL), Argonne, IL (United States); Choi, Seungmok [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-10-09

    This is a 3-way CRADA project working together with Corning, Inc. and Hyundai Motor Co. (HMC). The project is to understand particulate emissions from gasoline direct-injection engines (GDI) and their physico-chemical properties. In addition, this project focuses on providing fundamental information about filtration and regeneration mechanisms occurring in gasoline particulate filter (GPF) systems. For the work, Corning provides most advanced filter substrates for GPF applications and HMC provides three-way catalyst (TWC) coating services of these filter by way of a catalyst coating company. Then, Argonne National Laboratory characterizes fundamental behaviors of filtration and regeneration processes as well as evaluated TWC functionality for the coated filters. To examine aging impacts on TWC and GPF performance, the research team evaluates gaseous and particulate emissions as well as back-pressure increase with ash loading by using an engine-oil injection system to accelerate ash loading in TWC-coated GPFs.

  20. The Efficacy of the WaveOne Reciprocating File System versus the ProTaper Retreatment System in Endodontic Retreatment of Two Different Obturating Techniques.

    Science.gov (United States)

    Jorgensen, Ben; Williamson, Anne; Chu, Rene; Qian, Fang

    2017-06-01

    This ex vivo study aimed to evaluate the efficacy of retreating GuttaCore (Dentsply Tulsa Dental Specialties, Tulsa, OK) and warm vertically condensed gutta-percha in moderately curved canals with 2 different systems: ProTaper Universal Retreatment (Dentsply Tulsa Dental) and WaveOne (Dentsply Tulsa Dental). Eighty mesial roots of mandibular molars were used in this study. The mesiobuccal canals in each sample were prepared to length with the WaveOne Primary file (Dentsply Tulsa Dental). The canals were obturated with either a warm vertical approach or with GuttaCore and divided into 4 retreatment groups with the same mean root curvature: warm vertical retreated with ProTaper, warm vertical retreated with WaveOne, GuttaCore retreated with ProTaper, and GuttaCore retreated with WaveOne. The warm vertical groups were obturated using a continuous-wave technique of gutta-percha compaction, and the GuttaCore groups were obturated according to the manufacturer's instructions. After allowing sealer to set, each specimen was retreated with either the ProTaper Universal Retreatment files D1, D2, or D3 or with the WaveOne Primary file to the predetermined working length. The time taken to reach the working length was recorded. Instrument fatigue and failure were also evaluated. The post hoc 2-sample t tests showed that the overall mean total time taken to reach the working length for the warm vertical groups was significantly greater than that observed for the GuttaCore groups (mean = 87.11 vs 60.16 seconds, respectively), and the overall mean total time taken to reach the working length for WaveOne was significantly greater than that observed for ProTaper (99.09 vs 48.18 seconds, respectively). Two-way analysis of variance showed a significant main effect for both the type of experiment groups (F 1,76  = 15.32, P = .0002) and the type of retreatments (F 1,76  = 54.67, P file underwent more separations than the ProTaper files. The WaveOne Primary file underwent

  1. Ground-Based Global Navigation Satellite System (GNSS) Compact Observation Data (1-second sampling, sub-hourly files) from NASA CDDIS

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset consists of ground-based Global Navigation Satellite System (GNSS) Observation Data (1-second sampling, sub-hourly files) from the NASA Crustal Dynamics...

  2. Smear layer and debris removal using manual Ni-Ti files compared with rotary Protaper Ni- Ti files - An In-Vitro SEM study.

    Science.gov (United States)

    Reddy, J M V Raghavendra; Latha, Prasanna; Gowda, Basavana; Manvikar, Varadendra; Vijayalaxmi, D Benal; Ponangi, Kalyana Chakravarthi

    2014-02-01

    Predictable successful endodontic therapy depends on correct diagnosis, effective cleaning, shaping and disinfection of the root canals and adequate obturation. Irrigation serves as a flush to remove debris, tissue solvent and lubricant from the canal irregularities; however these irregularities can restrict the complete debridement of root canal by mechanical instrumentation.Various types of hand and rotary instruments are used for the preparation of the root canal system to obtain debris free canals. The purpose of this study was to evaluate the amount of smear layer and debris removal on canal walls following the using of manual Nickel-Titanium (NiTi) files compared with rotary ProTaperNiTi files using a Scanning Electron Microscope in two individual groups. A comparative study consisting of 50 subjects randomized into two groups - 25 subjects in Group A (manual) and 25 subjects in Group B (rotary) was undertaken to investigate and compare the effects of smear layer and debris between manual and rotary NiTi instruments. Chi square test was used to find the significance of smear layer and debris removal in the coronal, middle and apical between Group A and Group B. Both systems of Rotary ProTaperNiTi and manual NiTi files used in the present study, did not create completely clean root canals. Manual NiTi files produced significantly less smear layer and debris compared to Rotary ProTaperNiTi instruments. Rotary instruments were less time consuming when compared to manual instruments. Instrument separation was not found to be significant with both the groups. Both systems of Rotary ProTaperNiTi and manual NiTi files used did not produce completely clean root canals. Manual NiTi files produced significantly less smear layer and debris compared to Rotary protaper instruments. How to cite the article: Reddy JM, Latha P, Gowda B, Manvikar V, Vijayalaxmi DB, Ponangi KC. Smear layer and debris removal using manual Ni-Ti files compared with rotary Protaper Ni-Ti files

  3. Data vaults: a database welcome to scientific file repositories

    NARCIS (Netherlands)

    Ivanova, M.; Kargın, Y.; Kersten, M.; Manegold, S.; Zhang, Y.; Datcu, M.; Espinoza Molina, D.

    2013-01-01

    Efficient management and exploration of high-volume scientific file repositories have become pivotal for advancement in science. We propose to demonstrate the Data Vault, an extension of the database system architecture that transparently opens scientific file repositories for efficient in-database

  4. Endodontic Treatment of Hypertaurodontic Mandibular Molar Using Reciprocating Single-file System: A Case Report.

    Science.gov (United States)

    C do Nascimento, Adriano; A F Marques, André; C Sponchiado-Júnior, Emílio; F R Garcia, Lucas; M A de Carvalho, Fredson

    2016-01-01

    Taurodontism is a developmental tooth disorder characterized by lack of constriction in the cementoenamel junction and consequent vertical stretch of the pulp chamber, accompanied by apical displacement of the pulpal floor. The endodontic treatment of teeth with this type of morpho-anatomical anomaly is challenging. The purpose of this article is to report the successful endodontic treatment of a hypertaurodontic mandibular molar using a reciprocating single-file system.

  5. Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-file Systems.

    Science.gov (United States)

    Prabhakar, Attiguppe R; Yavagal, Chandrashekar; Dixit, Kratika; Naik, Saraswathi V

    2016-01-01

    Primary root canals are considered to be most challenging due to their complex anatomy. "Wave one" and "one shape" are single-file systems with reciprocating and rotary motion respectively. The aim of this study was to evaluate and compare dentin thickness, centering ability, canal transportation, and instrumentation time of wave one and one shape files in primary root canals using a cone beam computed tomographic (CBCT) analysis. This is an experimental, in vitro study comparing the two groups. A total of 24 extracted human primary teeth with minimum 7 mm root length were included in the study. Cone beam computed tomographic images were taken before and after the instrumentation for each group. Dentin thickness, centering ability, canal transportation, and instrumentation times were evaluated for each group. A significant difference was found in instrumentation time and canal transportation measures between the two groups. Wave one showed less canal transportation as compared with one shape, and the mean instrumentation time of wave one was significantly less than one shape. Reciprocating single-file systems was found to be faster with much less procedural errors and can hence be recommended for shaping the root canals of primary teeth. How to cite this article: Prabhakar AR, Yavagal C, Dixit K, Naik SV. Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-File Systems. Int J Clin Pediatr Dent 2016;9(1):45-49.

  6. A fortran code CVTRAN to provide cross-section file for TWODANT by using macroscopic file written by SRAC

    International Nuclear Information System (INIS)

    Yamane, Tsuyoshi; Tsuchihashi, Keichiro

    1999-03-01

    A code CVTRAN provides the macroscopic cross-sections in the format of XSLIB file which is one of Standard interface files for a two-dimensional Sn transport code TWODANT by reading a macroscopic cross section file in the PDS format which is prepared by SRAC execution. While a two-dimensional Sn transport code TWOTRAN published by LANL is installed as a module in the SRAC code system, several functions such as alpha search, concentration search, zone thickness search and various edits are suppressed. Since the TWODANT code was released from LANL, its short running time, stable convergence and plenty of edits have attracted many users. The code CVTRAN makes the TWODANT available to the SRAC user by providing the macroscopic cross-sections on a card-image file XSLIB. The CVTRAN also provides material dependent fission spectra into a card-image format file CVLIB, together with group velocities, group boundary energies and material names. The user can feed them into the TWODANT input, if necessary, by cut-and-paste command. (author)

  7. Renewal-anomalous-heterogeneous files

    International Nuclear Information System (INIS)

    Flomenbom, Ophir

    2010-01-01

    Renewal-anomalous-heterogeneous files are solved. A simple file is made of Brownian hard spheres that diffuse stochastically in an effective 1D channel. Generally, Brownian files are heterogeneous: the spheres' diffusion coefficients are distributed and the initial spheres' density is non-uniform. In renewal-anomalous files, the distribution of waiting times for individual jumps is not exponential as in Brownian files, yet obeys: ψ α (t)∼t -1-α , 0 2 >, obeys, 2 >∼ 2 > nrml α , where 2 > nrml is the MSD in the corresponding Brownian file. This scaling is an outcome of an exact relation (derived here) connecting probability density functions of Brownian files and renewal-anomalous files. It is also shown that non-renewal-anomalous files are slower than the corresponding renewal ones.

  8. 20 CFR 658.411 - Filing and assignment of JS-related complaints.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Filing and assignment of JS-related... Agency Js Complaint System § 658.411 Filing and assignment of JS-related complaints. (a) JS-related... office personnel shall be as follows: (1) All JS-related complaints filed with a local office, and...

  9. Tabulation of Fundamental Assembly Heat and Radiation Source Files

    International Nuclear Information System (INIS)

    T. deBues; J.C. Ryman

    2006-01-01

    The purpose of this calculation is to tabulate a set of computer files for use as input to the WPLOAD thermal loading software. These files contain details regarding heat and radiation from pressurized water reactor (PWR) assemblies and boiling water reactor (BWR) assemblies. The scope of this calculation is limited to rearranging and reducing the existing file information into a more streamlined set of tables for use as input to WPLOAD. The electronic source term files used as input to this calculation were generated from the output files of the SAS2H/ORIGIN-S sequence of the SCALE Version 4.3 modular code system, as documented in References 2.1.1 and 2.1.2, and are included in Attachment II

  10. PC Graphic file programing

    International Nuclear Information System (INIS)

    Yang, Jin Seok

    1993-04-01

    This book gives description of basic of graphic knowledge and understanding and realization of graphic file form. The first part deals with graphic with graphic data, store of graphic data and compress of data, programing language such as assembling, stack, compile and link of program and practice and debugging. The next part mentions graphic file form such as Mac paint file, GEM/IMG file, PCX file, GIF file, and TIFF file, consideration of hardware like mono screen driver and color screen driver in high speed, basic conception of dithering and conversion of formality.

  11. Some aspects of the file organization and retrieval strategy in large data-bases

    International Nuclear Information System (INIS)

    Arnaudov, D.D.; Govorun, N.N.

    1977-01-01

    Methods of organizing a big information retrieval system are discribed. A special attention is paid to the file organization. An adapting file structure is described in more detail. The discussed method gives one the opportunity to organize large files in such a way that the response time of the system can be minimized, when the file is increasing. In connection with the retrieval strategy a method is proposed, which uses the frequencies of the descr/iptors and the couples of the descriptors to forecast the expected number of the relevant documents. Programmes are made, on the base of these methods, which are used in the information retrieval systems of JINR

  12. Solving data-at-rest for the storage and retrieval of files in ad hoc networks

    Science.gov (United States)

    Knobler, Ron; Scheffel, Peter; Williams, Jonathan; Gaj, Kris; Kaps, Jens-Peter

    2013-05-01

    Based on current trends for both military and commercial applications, the use of mobile devices (e.g. smartphones and tablets) is greatly increasing. Several military applications consist of secure peer to peer file sharing without a centralized authority. For these military applications, if one or more of these mobile devices are lost or compromised, sensitive files can be compromised by adversaries, since COTS devices and operating systems are used. Complete system files cannot be stored on a device, since after compromising a device, an adversary can attack the data at rest, and eventually obtain the original file. Also after a device is compromised, the existing peer to peer system devices must still be able to access all system files. McQ has teamed with the Cryptographic Engineering Research Group at George Mason University to develop a custom distributed file sharing system to provide a complete solution to the data at rest problem for resource constrained embedded systems and mobile devices. This innovative approach scales very well to a large number of network devices, without a single point of failure. We have implemented the approach on representative mobile devices as well as developed an extensive system simulator to benchmark expected system performance based on detailed modeling of the network/radio characteristics, CONOPS, and secure distributed file system functionality. The simulator is highly customizable for the purpose of determining expected system performance for other network topologies and CONOPS.

  13. Comparative evaluation of apically extruded debris during root canal instrumentation using two Ni-Ti single file rotary systems: An in vitro study.

    Science.gov (United States)

    Singbal, Kiran; Jain, Disha; Raja, Kranthi; Hoe, Tan Ming

    2017-01-01

    Apical extrusion of debris during instrumentation is detrimental to the patient. The aim of this study was to evaluate the apical extrusion of debris during root canal instrumentation using two single file rotary Ni-Ti systems. Thirty freshly extracted mandibular premolars with straight roots were sterilized and divided into two groups instrumented using: One Shape rotary Ni-Ti system with Endoflare orifice shaper (Group 1) and Neo-Niti rotary Ni-Ti system with C1 orifice shaper (Group 2). Preweighed Eppendorf tubes fitted for each tooth before instrumentation. During instrumentation, 1 mL of distilled water with a 30-gauge needle was used to irrigate after every instrument. Tips of the tooth were irrigated with 2 ml distilled water after removal from Eppendorf tubes. The total volume of irrigant in each group was the same 8 ml. All tubes were incubated at 68°C for 15 days and subsequently weighed. The difference between pre- and post-debris weights was calculated, and statistical analysis was performed using independent t -test and level of significance was set at 0.05. The difference between pre- and post-weights was significantly greater for the One Shape system. The Neolix Niti single file was associated with less extrusion compared to One Shape single file system.

  14. Experimental Analysis of File Transfer Rates over Wide-Area Dedicated Connections

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Nageswara S. [ORNL; Liu, Qiang [ORNL; Sen, Satyabrata [ORNL; Hinkel, Gregory Carl [ORNL; Imam, Neena [ORNL; Foster, Ian [University of Chicago; Kettimuthu, R. [Argonne National Laboratory (ANL); Settlemyer, Bradley [Los Alamos National Laboratory (LANL); Wu, Qishi [University of Memphis; Yun, Daqing [Harrisburg University

    2016-12-01

    File transfers over dedicated connections, supported by large parallel file systems, have become increasingly important in high-performance computing and big data workflows. It remains a challenge to achieve peak rates for such transfers due to the complexities of file I/O, host, and network transport subsystems, and equally importantly, their interactions. We present extensive measurements of disk-to-disk file transfers using Lustre and XFS file systems mounted on multi-core servers over a suite of 10 Gbps emulated connections with 0-366 ms round trip times. Our results indicate that large buffer sizes and many parallel flows do not always guarantee high transfer rates. Furthermore, large variations in the measured rates necessitate repeated measurements to ensure confidence in inferences based on them. We propose a new method to efficiently identify the optimal joint file I/O and network transport parameters using a small number of measurements. We show that for XFS and Lustre with direct I/O, this method identifies configurations achieving 97% of the peak transfer rate while probing only 12% of the parameter space.

  15. Challenging Ubiquitous Inverted Files

    NARCIS (Netherlands)

    de Vries, A.P.

    2000-01-01

    Stand-alone ranking systems based on highly optimized inverted file structures are generally considered ‘the’ solution for building search engines. Observing various developments in software and hardware, we argue however that IR research faces a complex engineering problem in the quest for more

  16. PCF File Format.

    Energy Technology Data Exchange (ETDEWEB)

    Thoreson, Gregory G [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-08-01

    PCF files are binary files designed to contain gamma spectra and neutron count rates from radiation sensors. It is the native format for the GAmma Detector Response and Analysis Software (GADRAS) package [1]. It can contain multiple spectra and information about each spectrum such as energy calibration. This document outlines the format of the file that would allow one to write a computer program to parse and write such files.

  17. The version control service for ATLAS data acquisition configuration filesDAQ ; configuration ; OKS ; XML

    CERN Document Server

    Soloviev, Igor; The ATLAS collaboration

    2012-01-01

    To configure data taking session the ATLAS systems and detectors store more than 160 MBytes of data acquisition related configuration information in OKS XML files. The total number of the files exceeds 1300 and they are updated by many system experts. In the past from time to time after such updates we had experienced problems caused by XML syntax errors or inconsistent state of files from a point of view of the overall ATLAS configuration. It was not always possible to know who made a modification causing problems or how to go back to a previous version of the modified file. Few years ago a special service addressing these issues has been implemented and deployed on ATLAS Point-1. It excludes direct write access to XML files stored in a central database repository. Instead, for an update the files are copied into a user repository, validated after modifications and committed using a version control system. The system's callback updates the central repository. Also, it keeps track of all modifications providi...

  18. 75 FR 61741 - Combined Notice of Filings No. 1

    Science.gov (United States)

    2010-10-06

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings No. 1 September 20, 2010. Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings: Docket Numbers: RP10-1305-000. Applicants: Venice Gathering System, L.L.C...

  19. A data compression algorithm for nuclear spectrum files

    International Nuclear Information System (INIS)

    Mika, J.F.; Martin, L.J.; Johnston, P.N.

    1990-01-01

    The total space occupied by computer files of spectra generated in nuclear spectroscopy systems can lead to problems of storage, and transmission time. An algorithm is presented which significantly reduces the space required to store nuclear spectra, without loss of any information content. Testing indicates that spectrum files can be routinely compressed by a factor of 5. (orig.)

  20. ENSDF: The evaluated nuclear structure data file

    International Nuclear Information System (INIS)

    Martin, M.J.

    1986-01-01

    The structure, organization, and contents of the Evaluated Nuclear Structure Data File, ENSDF, will be discussed. This file summarizes the state of experimental nuclear structure data for all nuclei as determined from consideration of measurements reported world wide. Special emphasis will be given to the data evaluation procedures and consistency checks utilized at the input stage and to the retrieval capabilities of the system at the output stage

  1. 47 CFR 1.1705 - Forms; electronic and manual filing.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Forms; electronic and manual filing. 1.1705... Operations and Licensing System (COALS) § 1.1705 Forms; electronic and manual filing. (a) Application forms... Cable Television Relay Service (CARS) shall use the following forms and associated schedules: (1) FCC...

  2. Provider of Services File

    Data.gov (United States)

    U.S. Department of Health & Human Services — The POS file consists of two data files, one for CLIA labs and one for 18 other provider types. The file names are CLIA and OTHER. If downloading the file, note it...

  3. The Grid Enabled Mass Storage System (GEMMS): the Storage and Data management system used at the INFN Tier1 at CNAF.

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    The storage solution currently used in production at the INFN Tier-1 at CNAF, is the result of several years of case studies, software development and tests. This solution, called the Grid Enabled Mass Storage System (GEMSS), is based on a custom integration between a fast and reliable parallel filesystem (IBM GPFS), with a complete integrated tape backend based on TIVOLI TSM Hierarchical storage management (HSM) and the Storage Resource Manager (StoRM), providing access to grid users through a standard SRM interface. Since the start of the operations of the Large Hadron Collider (LHC), all the LHC experiments have been using GEMMS at CNAF for both the fast access to data on disk and the long-term tape archive. Moreover, during the last year, GEMSS has become the standard solution for all the other experiments hosted at CNAF, allowing the definitive consolidation of the data storage layer. Our choice has proved to be successful in the last two years of production with constant enhancements in the software re...

  4. Auto Draw from Excel Input Files

    Science.gov (United States)

    Strauss, Karl F.; Goullioud, Renaud; Cox, Brian; Grimes, James M.

    2011-01-01

    The design process often involves the use of Excel files during project development. To facilitate communications of the information in the Excel files, drawings are often generated. During the design process, the Excel files are updated often to reflect new input. The problem is that the drawings often lag the updates, often leading to confusion of the current state of the design. The use of this program allows visualization of complex data in a format that is more easily understandable than pages of numbers. Because the graphical output can be updated automatically, the manual labor of diagram drawing can be eliminated. The more frequent update of system diagrams can reduce confusion and reduce errors and is likely to uncover symmetric problems earlier in the design cycle, thus reducing rework and redesign.

  5. Data Vaults: a Database Welcome to Scientific File Repositories

    NARCIS (Netherlands)

    M.G. Ivanova (Milena); Y. Kargin (Yagiz); M.L. Kersten (Martin); S. Manegold (Stefan); Y. Zhang (Ying); M. Datcu (Mihai); D. Espinoza Molina

    2013-01-01

    textabstractEfficient management and exploration of high-volume scientific file repositories have become pivotal for advancement in science. We propose to demonstrate the Data Vault, an extension of the database system architecture that transparently opens scientific file repositories for efficient

  6. A micro-computed tomographic evaluation of dentinal microcrack alterations during root canal preparation using single-file Ni-Ti systems.

    Science.gov (United States)

    Li, Mei-Lin; Liao, Wei-Li; Cai, Hua-Xiong

    2018-01-01

    The aim of the present study was to evaluate the length of dentinal microcracks observed prior to and following root canal preparation with different single-file nickel-titanium (Ni-Ti) systems using micro-computed tomography (micro-CT) analysis. A total of 80 mesial roots of mandibular first molars presenting with type II Vertucci canal configurations were scanned at an isotropic resolution of 7.4 µm. The samples were randomly assigned into four groups (n=20 per group) according to the system used for root canal preparation, including the WaveOne (WO), OneShape (OS), Reciproc (RE) and control groups. A second micro-CT scan was conducted after the root canals were prepared with size 25 instruments. Pre- and postoperative cross-section images of the roots (n=237,760) were then screened to identify the lengths of the microcracks. The results indicated that the microcrack lengths were notably increased following root canal preparation (Pfiles. Among the single-file Ni-Ti systems, WO and RE were not observed to cause notable microcracks, while the OS system resulted in evident microcracks.

  7. Assessment of Apical Extrusion of Debris during Endodontic Retreatment with 3 Rotary Nickel-Titanium Retreatment Systems and Hand Files

    Directory of Open Access Journals (Sweden)

    Gkampesi S.

    2016-03-01

    Full Text Available Aim: to evaluate the amount of debris extruded apically as well as the time needed for removal of root canal filling material using ProTaper, MTwo, REndo NiTi rotary retreatment systems and hand files.

  8. Status and evaluation methods of JENDL fusion file and JENDL PKA/KERMA file

    International Nuclear Information System (INIS)

    Chiba, S.; Fukahori, T.; Shibata, K.; Yu Baosheng; Kosako, K.

    1997-01-01

    The status of evaluated nuclear data in the JENDL fusion file and PKA/KERMA file is presented. The JENDL fusion file was prepared in order to improve the quality of the JENDL-3.1 data especially on the double-differential cross sections (DDXs) of secondary neutrons and gamma-ray production cross sections, and to provide DDXs of secondary charged particles (p, d, t, 3 He and α-particle) for the calculation of PKA and KERMA factors. The JENDL fusion file contains evaluated data of 26 elements ranging from Li to Bi. The data in JENDL fusion file reproduce the measured data on neutron and charged-particle DDXs and also on gamma-ray production cross sections. Recoil spectra in PKA/KERMA file were calculated from secondary neutron and charged-particle DDXs contained in the fusion file with two-body reaction kinematics. The data in the JENDL fusion file and PKA/KERMA file were compiled in ENDF-6 format with an MF=6 option to store the DDX data. (orig.)

  9. Quantitative evaluation of apical extrusion of intracanal bacteria using rotary ProTaper, K3XF, twisted and hand K-file system: An ex vivo study.

    Science.gov (United States)

    Ghogre, Priyanka; Chourasia, Hemant Ramesh; Agarwal, Manish; Singh, M P; Gurav, Sandeep; Ghogre, Rahul

    2015-01-01

    The aim of this study was to evaluate the number of intracanal bacteria extruded apically during root canal preparation using rotary ProTaper, K3XF, twisted, and hand K-file system. Seventy extracted single-rooted human mandibular premolar teeth were used. Access cavities were prepared and the teeth were mounted in glass vials. Root canals were then contaminated with a pure culture of Enterococcus faecalis (ATCC 29212) and incubated at 37°C for 24 h. The contaminated roots were divided into four experimental groups of 15 teeth each and one control group of 10 teeth. Group 1: ProTaper; Group 2: K3XF; Group 3: Twisted file; Group 4: Hand K-file; Group 5: Control group. Bacteria extruded from the apical foramen during instrumentation were collected into vials. The microbiological samples were incubated in culture media for 24 h. Colonies of bacteria were counted and the results were given as number of colony-forming units (CFU)/ml. The obtained data were analyzed using the Kruskal-Wallis one-way analysis of variance and Mann-Whitney U-tests. There was a significant difference between the rotary and hand instrumentation system related to the apically extruded intracanal bacteria. Both the rotary and hand instrumentation systems extruded intracanal bacteria through the apical foramen. K3XF file system showed least bacterial extrusion amongst all instrumentation groups.

  10. Land Boundary Conditions for the Goddard Earth Observing System Model Version 5 (GEOS-5) Climate Modeling System: Recent Updates and Data File Descriptions

    Science.gov (United States)

    Mahanama, Sarith P.; Koster, Randal D.; Walker, Gregory K.; Takacs, Lawrence L.; Reichle, Rolf H.; De Lannoy, Gabrielle; Liu, Qing; Zhao, Bin; Suarez, Max J.

    2015-01-01

    The Earths land surface boundary conditions in the Goddard Earth Observing System version 5 (GEOS-5) modeling system were updated using recent high spatial and temporal resolution global data products. The updates include: (i) construction of a global 10-arcsec land-ocean lakes-ice mask; (ii) incorporation of a 10-arcsec Globcover 2009 land cover dataset; (iii) implementation of Level 12 Pfafstetter hydrologic catchments; (iv) use of hybridized SRTM global topography data; (v) construction of the HWSDv1.21-STATSGO2 merged global 30 arc second soil mineral and carbon data in conjunction with a highly-refined soil classification system; (vi) production of diffuse visible and near-infrared 8-day MODIS albedo climatologies at 30-arcsec from the period 2001-2011; and (vii) production of the GEOLAND2 and MODIS merged 8-day LAI climatology at 30-arcsec for GEOS-5. The global data sets were preprocessed and used to construct global raster data files for the software (mkCatchParam) that computes parameters on catchment-tiles for various atmospheric grids. The updates also include a few bug fixes in mkCatchParam, as well as changes (improvements in algorithms, etc.) to mkCatchParam that allow it to produce tile-space parameters efficiently for high resolution AGCM grids. The update process also includes the construction of data files describing the vegetation type fractions, soil background albedo, nitrogen deposition and mean annual 2m air temperature to be used with the future Catchment CN model and the global stream channel network to be used with the future global runoff routing model. This report provides detailed descriptions of the data production process and data file format of each updated data set.

  11. Registering Researchers in Authority Files

    NARCIS (Netherlands)

    Altman, M.; Conlon, M.; Cristan, A.L.; Dawson, L.; Dunham, J.; Hickey, T.; Hook, D.; Horstmann, W.; MacEwan, A.; Schreur, P.; Smart, L.; Smith-Yoshimura, K.; Wacker, M.; Woutersen, S.

    2014-01-01

    Registering researchers in some type of authority file or identifier system has become more compelling as both institutions and researchers recognize the need to compile their scholarly output. The report presents functional requirements and recommendations for six stakeholders: researchers,

  12. Verification of respiratory-gated radiotherapy with new real-time tumour-tracking radiotherapy system using cine EPID images and a log file.

    Science.gov (United States)

    Shiinoki, Takehiro; Hanazawa, Hideki; Yuasa, Yuki; Fujimoto, Koya; Uehara, Takuya; Shibuya, Keiko

    2017-02-21

    A combined system comprising the TrueBeam linear accelerator and a new real-time tumour-tracking radiotherapy system, SyncTraX, was installed at our institution. The objectives of this study are to develop a method for the verification of respiratory-gated radiotherapy with SyncTraX using cine electronic portal image device (EPID) images and a log file and to verify this treatment in clinical cases. Respiratory-gated radiotherapy was performed using TrueBeam and the SyncTraX system. Cine EPID images and a log file were acquired for a phantom and three patients during the course of the treatment. Digitally reconstructed radiographs (DRRs) were created for each treatment beam using a planning CT set. The cine EPID images, log file, and DRRs were analysed using a developed software. For the phantom case, the accuracy of the proposed method was evaluated to verify the respiratory-gated radiotherapy. For the clinical cases, the intra- and inter-fractional variations of the fiducial marker used as an internal surrogate were calculated to evaluate the gating accuracy and set-up uncertainty in the superior-inferior (SI), anterior-posterior (AP), and left-right (LR) directions. The proposed method achieved high accuracy for the phantom verification. For the clinical cases, the intra- and inter-fractional variations of the fiducial marker were  ⩽3 mm and  ±3 mm in the SI, AP, and LR directions. We proposed a method for the verification of respiratory-gated radiotherapy with SyncTraX using cine EPID images and a log file and showed that this treatment is performed with high accuracy in clinical cases.

  13. [In vitro comparison of root canal preparation with step-back technique and GT rotary file--a nickel-titanium engine driven rotary instrument system].

    Science.gov (United States)

    Krajczár, Károly; Tóth, Vilmos; Nyárády, Zoltán; Szabó, Gyula

    2005-06-01

    The aim of the authors' study was to compare the remaining root canal wall thickness and the preparation time of root canals, prepared either with step-back technique, or with GT Rotary File, an engine driven nickel-titanium rotary instrument system. Twenty extracted molars were decoronated. Teeth were divided in two groups. In Group 1 root canals were prepared with step-back technique. In Group 2 GT Rotary File System was utilized. Preoperative vestibulo-oral X-ray pictures were taken from all teeth with radiovisiograph (RVG). The final preparations at the mesiobuccal canals (MB) were performed with size #30 and palatinal/distal canals with size #40 instruments. Postoperative RVG pictures were taken ensuring the preoperative positioning. The working time was measured in seconds during each preparation. The authors also assessed the remaining root canal wall thickness at 3, 6 and 9 mm from the radiological apex, comparing the width of the canal walls of the vestibulo-oral projections on pre- and postoperative RVG pictures both mesially and buccally. The ratios of the residual and preoperative root canal wall thickness were calculated and compared. The largest difference was found at the MB canals of the coronal and middle third level of the root, measured on the distal canal wall. The ratio of the remaining dentin wall thickness at the coronal and the middle level in the case of step-back preparation was 0.605 and 0.754, and 0.824 and 0.895 in the cases of GT files respectively. The preparation time needed for GT Rotary File System was altogether 68.7% (MB) and 52.5% (D/P canals) of corresponding step-back preparation times. The use of GT Rotary File with comparison of standard step-back method resulted in a shortened preparation time and excessive damage of the coronal part of the root canal could be avoided.

  14. Scalable I/O Systems via Node-Local Storage: Approaching 1 TB/sec File I/O

    Energy Technology Data Exchange (ETDEWEB)

    Bronevetsky, G; Moody, A

    2009-08-18

    In the race to PetaFLOP-speed supercomputing systems, the increase in computational capability has been accompanied by corresponding increases in CPU count, total RAM, and storage capacity. However, a proportional increase in storage bandwidth has lagged behind. In order to improve system reliability and to reduce maintenance effort for modern large-scale systems, system designers have opted to remove node-local storage from the compute nodes. Today's multi-TeraFLOP supercomputers are typically attached to parallel file systems that provide only tens of GBs/s of I/O bandwidth. As a result, such machines have access to much less than 1GB/s of I/O bandwidth per TeraFLOP of compute power, which is below the generally accepted limit required for a well-balanced system. In a many ways, the current I/O bottleneck limits the capabilities of modern supercomputers, specifically in terms of limiting their working sets and restricting fault tolerance techniques, which become critical on systems consisting of tens of thousands of components. This paper resolves the dilemma between high performance and high reliability by presenting an alternative system design which makes use of node-local storage to improve aggregate system I/O bandwidth. In this work, we focus on the checkpointing use-case and present an experimental evaluation of the Scalable Checkpoint/Restart (SCR) library, a new adaptive checkpointing library that uses node-local storage to significantly improve the checkpointing performance of large-scale supercomputers. Experiments show that SCR achieves unprecedented write speeds, reaching a measured 700GB/s of aggregate bandwidth on 8,752 processors and an estimated 1TB/s for a similarly structured machine of 12,500 processors. This corresponds to a speedup of over 70x compared to the bandwidth provided by the 10GB/s parallel file system the cluster uses. Further, SCR can adapt to an environment in which there is wide variation in performance or capacity among

  15. Access to DIII-D data located in multiple files and multiple locations

    International Nuclear Information System (INIS)

    McHarg, B.B. Jr.

    1993-10-01

    The General Atomics DIII-D tokamak fusion experiment is now collecting over 80 MB of data per discharge once every 10 min, and that quantity is expected to double within the next year. The size of the data files, even in compressed format, is becoming increasingly difficult to handle. Data is also being acquired now on a variety of UNIX systems as well as MicroVAX and MODCOMP computer systems. The existing computers collect all the data into a single shot file, and this data collection is taking an ever increasing amount of time as the total quantity of data increases. Data is not available to experimenters until it has been collected into the shot file, which is in conflict with the substantial need for data examination on a timely basis between shots. The experimenters are also spread over many different types of computer systems (possibly located at other sites). To improve data availability and handling, software has been developed to allow individual computer systems to create their own shot files locally. The data interface routine PTDATA that is used to access DIII-D data has been modified so that a user's code on any computer can access data from any computer where that data might be located. This data access is transparent to the user. Breaking up the shot file into separate files in multiple locations also impacts software used for data archiving, data management, and data restoration

  16. Estimating motor carrier management information system crash file underreporting from carrier records : research brief.

    Science.gov (United States)

    2017-08-01

    This study estimated a significant amount of underreporting to the MCMIS crash file by the States, for the carriers who cooperated in the study. For the study carriers, it appears that the MCMIS file contained about 66 percent of their reportable cra...

  17. Prototype of a file-based high-level trigger in CMS

    International Nuclear Information System (INIS)

    Bauer, G; Darlea, G-L; Gomez-Ceballos, G; Bawej, T; Chaze, O; Coarasa, J A; Deldicque, C; Dobson, M; Dupont, A; Gigi, D; Glege, F; Gomez-Reino, R; Hartl, C; Hegeman, J; Masetti, L; Behrens, U; Branson, J; Cittolin, S; Holzner, A; Erhan, S

    2014-01-01

    The DAQ system of the CMS experiment at the LHC is upgraded during the accelerator shutdown in 2013/14. To reduce the interdependency of the DAQ system and the high-level trigger (HLT), we investigate the feasibility of using a file-system-based HLT. Events of ∼1 MB size are built at the level-1 trigger rate of 100 kHz. The events are assembled by ∼50 builder units (BUs). Each BU writes the raw events at ∼2GB/s to a local file system shared with Q(10) filter-unit machines (FUs) running the HLT code. The FUs read the raw data from the file system, select Q(1%) of the events, and write the selected events together with monitoring meta-data back to a disk. This data is then aggregated over several steps and made available for offline reconstruction and online monitoring. We present the challenges, technical choices, and performance figures from the prototyping phase. In addition, the steps to the final system implementation will be discussed.

  18. Computational system to create an entry file for replicating I-125 seeds simulating brachytherapy case studies using the MCNPX code

    Directory of Open Access Journals (Sweden)

    Leonardo da Silva Boia

    2014-03-01

    Full Text Available Purpose: A computational system was developed for this paper in the C++ programming language, to create a 125I radioactive seed entry file, based on the positioning of a virtual grid (template in voxel geometries, with the purpose of performing prostate cancer treatment simulations using the MCNPX code.Methods: The system is fed with information from the planning system with regard to each seed’s location and its depth, and an entry file is automatically created with all the cards (instructions for each seed regarding their cell blocks and surfaces spread out spatially in the 3D environment. The system provides with precision a reproduction of the clinical scenario for the MCNPX code’s simulation environment, thereby allowing the technique’s in-depth study.Results and Conclusion: The preliminary results from this study showed that the lateral penumbra of uniform scanning proton beams was less sensitive In order to validate the computational system, an entry file was created with 88 125I seeds that were inserted in the phantom’s MAX06 prostate region with initial activity determined for the seeds at the 0.27 mCi value. Isodose curves were obtained in all the prostate slices in 5 mm steps in the 7 to 10 cm interval, totaling 7 slices. Variance reduction techniques were applied in order to optimize computational time and the reduction of uncertainties such as photon and electron energy interruptions in 4 keV and forced collisions regarding cells of interest. Through the acquisition of isodose curves, the results obtained show that hot spots have values above 300 Gy, as anticipated in literature, stressing the importance of the sources’ correct positioning, in which the computational system developed provides, in order not to release excessive doses in adjacent risk organs. The 144 Gy prescription curve showed in the validation process that it covers perfectly a large percentage of the volume, at the same time that it demonstrates a large

  19. NAFFS: network attached flash file system for cloud storage on portable consumer electronics

    Science.gov (United States)

    Han, Lin; Huang, Hao; Xie, Changsheng

    Cloud storage technology has become a research hotspot in recent years, while the existing cloud storage services are mainly designed for data storage needs with stable high speed Internet connection. Mobile Internet connections are often unstable and the speed is relatively low. These native features of mobile Internet limit the use of cloud storage in portable consumer electronics. The Network Attached Flash File System (NAFFS) presented the idea of taking the portable device built-in NAND flash memory as the front-end cache of virtualized cloud storage device. Modern portable devices with Internet connection have built-in more than 1GB NAND Flash, which is quite enough for daily data storage. The data transfer rate of NAND flash device is much higher than mobile Internet connections[1], and its non-volatile feature makes it very suitable as the cache device of Internet cloud storage on portable device, which often have unstable power supply and intermittent Internet connection. In the present work, NAFFS is evaluated with several benchmarks, and its performance is compared with traditional network attached file systems, such as NFS. Our evaluation results indicate that the NAFFS achieves an average accessing speed of 3.38MB/s, which is about 3 times faster than directly accessing cloud storage by mobile Internet connection, and offers a more stable interface than that of directly using cloud storage API. Unstable Internet connection and sudden power off condition are tolerable, and no data in cache will be lost in such situation.

  20. Comparison of working length control consistency between hand K-files and Mtwo NiTi rotary system.

    Science.gov (United States)

    Krajczár, Károly; Varga, Enikő; Marada, Gyula; Jeges, Sára; Tóth, Vilmos

    2016-04-01

    The purpose of this study was to investigate the consistency of working length control between hand instrumentation in comparison to engine driven Mtwo nickel-titanium rotary files. Forty extracted maxillary molars were selected and divided onto two parallel groups. The working lengths of the mesiobuccal root canals were estimated. The teeth were fixed in a phantom head. The root canal preparation was carried out group 1 (n=20) with hand K-files, (VDW, Munich, Germany) and group 2 (n=20) with Mtwo instruments (VDW, Munich, Germany). Vestibulo-oral and mesio-distal directional x-ray images were taken before the preparation with #10 K-file, inserted into the mesiobuccal root canal to the working length, and after preparation with #25, #30 and #40 files. Working lenght changes were detected with measurements between the radiological apex and the instrument tips. In the Mtwo group a difference in the working competency (protary files. Mtwo NiTi rotary file did therefore proved to be more accurate in comparison to the conventional hand instrumentation. Working length, Mtwo, nickel-titanium, hand preparation, engine driven preparation.

  1. The Design of a Secure File Storage System

    Science.gov (United States)

    1979-12-01

    ERROR _CODE (Przi SUCO COPE) !01ile not found; write access to dtrectorv not permitted I t := GATEKEFPER?.TICKFT ’MAIL BOX, 0) G ATE KF YP F I ~D iNC...BOX.MS’T.SUCC CODE F’OF COD? (DIOR SUCO CODE) Ifile_ not found.; Fead acceLss to directoryv file t ~TRKEPE.TIKFT MIT BOX C) GATHYP~PE-I.AWAIT (MAILBOX, C. (t+2

  2. HUD GIS Boundary Files

    Data.gov (United States)

    Department of Housing and Urban Development — The HUD GIS Boundary Files are intended to supplement boundary files available from the U.S. Census Bureau. The files are for community planners interested in...

  3. From files to SAF: 3D endodontic treatment is possible at last.

    Science.gov (United States)

    Metzger, Zvi

    2011-01-01

    3D cleaning, shaping and obturation of root canals has always been the desired goal of endodontic treatment which in many cases is difficult to attain. The introduction of NiTi rotary files made a major change in endodontic practice, making treatment easier, safer and faster. Nevertheless, after 16 years of intensive development, most of these instruments still share several drawbacks, the major one being the inability to three-dimensionally clean and shape oval root canals. The Self-Adjusting File (SAF) System was designed to overcome many of the current drawbacks of rotary file systems. It is based on a hollow, highly compressible file that adapts itself three-dimensionally to the shape of a given root canal, including its cross section. The file is operated with vibratory in-and-out motion, with continuous irrigation delivered by a peristaltic pump through the hollow file. A uniform layer of dentin is removed from the whole circumference of the root canal, thus achieving the main goals of root canal treatment while preserving the remaining root dentin. The 3D scrubbing effect of the file, combined with the always fresh irrigant, result in unprecedentedly clean canals which facilitate in turn better obturation. More effective disinfection of flat-oval root canals is another goal which is simultaneously attained. The safety of the root-canal treatment is also greatly enhanced by the high mechanical stability of the SAF and by using a new concept of no-pressure irrigation. The SAF System gets the operator much closer to the long-desired goal of 3D root-canal treatment.

  4. Nuclear Structure References (NSR) file

    International Nuclear Information System (INIS)

    Ewbank, W.B.

    1978-08-01

    The use of the Nuclear Structure References file by the Nuclear Data Project at ORNL is described. Much of the report concerns format information of interest only to those preparing input to the system or otherwise needing detailed knowledge of its internal structure. 17 figures

  5. EVALUATING A MANAGEMENT SYSTEM OF ELECTRONIC COURT FILES ACCORDING TO ARGENTINE MODERNIZATION PLAN

    Directory of Open Access Journals (Sweden)

    Rescaldani Lucrecia

    2017-06-01

    Full Text Available The Modernization Plan decree was promulgated in early 2016 in order to renew electronic government efforts in Argentina. Some of its objectives include to transparent the management of government processes, to establish a digital schedule and to promote state efficiency. San Luis is among the pioneering provinces leading e-government in Argentina since its implementation as part of its agenda at the beginning of the 21st century. In fact, the province enabled one of the first management system of electronic court files in the country. This paper describes e-government in San Luis and focuses on the judicial electronic management system under the light of the Modernization Plan decree. This study uncovers improvement opportunities and it suggests a series of actions to be carried out.

  6. Verification of respiratory-gated radiotherapy with new real-time tumour-tracking radiotherapy system using cine EPID images and a log file

    Science.gov (United States)

    Shiinoki, Takehiro; Hanazawa, Hideki; Yuasa, Yuki; Fujimoto, Koya; Uehara, Takuya; Shibuya, Keiko

    2017-02-01

    A combined system comprising the TrueBeam linear accelerator and a new real-time tumour-tracking radiotherapy system, SyncTraX, was installed at our institution. The objectives of this study are to develop a method for the verification of respiratory-gated radiotherapy with SyncTraX using cine electronic portal image device (EPID) images and a log file and to verify this treatment in clinical cases. Respiratory-gated radiotherapy was performed using TrueBeam and the SyncTraX system. Cine EPID images and a log file were acquired for a phantom and three patients during the course of the treatment. Digitally reconstructed radiographs (DRRs) were created for each treatment beam using a planning CT set. The cine EPID images, log file, and DRRs were analysed using a developed software. For the phantom case, the accuracy of the proposed method was evaluated to verify the respiratory-gated radiotherapy. For the clinical cases, the intra- and inter-fractional variations of the fiducial marker used as an internal surrogate were calculated to evaluate the gating accuracy and set-up uncertainty in the superior-inferior (SI), anterior-posterior (AP), and left-right (LR) directions. The proposed method achieved high accuracy for the phantom verification. For the clinical cases, the intra- and inter-fractional variations of the fiducial marker were  ⩽3 mm and  ±3 mm in the SI, AP, and LR directions. We proposed a method for the verification of respiratory-gated radiotherapy with SyncTraX using cine EPID images and a log file and showed that this treatment is performed with high accuracy in clinical cases. This work was partly presented at the 58th Annual meeting of American Association of Physicists in Medicine.

  7. JINR information retrieval system

    International Nuclear Information System (INIS)

    Arnaudov, D.D.; Govorun, N.N.

    1975-01-01

    The organization of the main files of the JINR Information Retrieval System is described. There are four main files in the System. They are as follows: MD file that consists of abstracts of documents; OMPOD file where the index records of documents are gathered; MZD file that consists of list heads, and OMD file- the file of descriptors. The last three files are considered in some detail. The System is realized in the COBOL language on the CDC computer

  8. 33 CFR 148.246 - When is a document considered filed and where should I file it?

    Science.gov (United States)

    2010-07-01

    ... filed and where should I file it? 148.246 Section 148.246 Navigation and Navigable Waters COAST GUARD... Formal Hearings § 148.246 When is a document considered filed and where should I file it? (a) If a document to be filed is submitted by mail, it is considered filed on the date it is postmarked. If a...

  9. Quantitative evaluation of apical extrusion of intracanal bacteria using rotary ProTaper, K3XF, twisted and hand K-file system: An ex vivo study

    Directory of Open Access Journals (Sweden)

    Priyanka Ghogre

    2015-01-01

    Conclusions: Both the rotary and hand instrumentation systems extruded intracanal bacteria through the apical foramen. K3XF file system showed least bacterial extrusion amongst all instrumentation groups.

  10. SU-E-T-473: A Patient-Specific QC Paradigm Based On Trajectory Log Files and DICOM Plan Files

    International Nuclear Information System (INIS)

    DeMarco, J; McCloskey, S; Low, D; Moran, J

    2014-01-01

    Purpose: To evaluate a remote QC tool for monitoring treatment machine parameters and treatment workflow. Methods: The Varian TrueBeamTM linear accelerator is a digital machine that records machine axis parameters and MLC leaf positions as a function of delivered monitor unit or control point. This information is saved to a binary trajectory log file for every treatment or imaging field in the patient treatment session. A MATLAB analysis routine was developed to parse the trajectory log files for a given patient, compare the expected versus actual machine and MLC positions as well as perform a cross-comparison with the DICOM-RT plan file exported from the treatment planning system. The parsing routine sorts the trajectory log files based on the time and date stamp and generates a sequential report file listing treatment parameters and provides a match relative to the DICOM-RT plan file. Results: The trajectory log parsing-routine was compared against a standard record and verify listing for patients undergoing initial IMRT dosimetry verification and weekly and final chart QC. The complete treatment course was independently verified for 10 patients of varying treatment site and a total of 1267 treatment fields were evaluated including pre-treatment imaging fields where applicable. In the context of IMRT plan verification, eight prostate SBRT plans with 4-arcs per plan were evaluated based on expected versus actual machine axis parameters. The average value for the maximum RMS MLC error was 0.067±0.001mm and 0.066±0.002mm for leaf bank A and B respectively. Conclusion: A real-time QC analysis program was tested using trajectory log files and DICOM-RT plan files. The parsing routine is efficient and able to evaluate all relevant machine axis parameters during a patient treatment course including MLC leaf positions and table positions at time of image acquisition and during treatment

  11. Jefferson Lab mass storage and file replication services

    International Nuclear Information System (INIS)

    Bird, I.; Chen, Y.; Hess, B.; Kowalski, A.; Watson, C.

    2001-01-01

    Jefferson Lab has implemented a scalable, distributed, high performance mass storage system-JASMine. The system is entirely implemented in Java, provides access to robotic tape storage and includes disk cache and stage manager components. The disk manager subsystem may be used independently to manage stand-alone disk pools. The system includes a scheduler to provide policy-based access to the storage systems. Security is provided by pluggable authentication modules and it implemented at the network socket level. The tape and disk cache systems have well defined interfaces in order to provide integration with grid-based services. The system is in production and being used to archive 1 TB per day from the experiments, and currently moves over 2 TB per day total. The authors will describe the architecture of JASMine; discuss the rationale for building the system, and present a transparent 3 rd party file replication service to move data to collaborating institutes using JASMine, XML, and servlet technology interfacing to grid-based file transfer mechanisms

  12. SIDS-toADF File Mapping Manual

    Science.gov (United States)

    McCarthy, Douglas; Smith, Matthew; Poirier, Diane; Smith, Charles A. (Technical Monitor)

    2002-01-01

    The "CFD General Notation System" (CGNS) consists of a collection of conventions, and conforming software, for the storage and retrieval of Computational Fluid Dynamics (CFD) data. It facilitates the exchange of data between sites and applications, and helps stabilize the archiving of aerodynamic data. This effort was initiated in order to streamline the procedures in exchanging data and software between NASA and its customers, but the goal is to develop CGNS into a National Standard for the exchange of aerodynamic data. The CGNS development team is comprised of members from Boeing Commercial Airplane Group, NASA-Ames, NASA-Langley, NASA-Lewis, McDonnell-Douglas Corporation (now Boeing-St. Louis), Air Force-Wright Lab., and ICEM-CFD Engineering. The elements of CGNS address all activities associated with the storage of data on external media and its movement to and from application programs. These elements include: 1) The Advanced Data Format (ADF) Database manager, consisting of both a file format specification and its I/O software, which handles the actual reading and writing of data from and to external storage media; 2) The Standard Interface Data Structures (SIDS), which specify the intellectual content of CFD data and the conventions governing naming and terminology; 3) The SIDS-to-ADF File Mapping conventions, which specify the exact location where the CFD data defined by the SIDS is to be stored within the ADF file(s); and 4) The CGNS Mid-level Library, which provides CFD-knowledgeable routines suitable for direct installation into application codes. The SIDS-toADF File Mapping Manual specifies the exact manner in which, under CGNS conventions, CFD data structures (the SIDS) are to be stored in (i.e., mapped onto) the file structure provided by the database manager (ADF). The result is a conforming CGNS database. Adherence to the mapping conventions guarantees uniform meaning and location of CFD data within ADF files, and thereby allows the construction of

  13. Evaluation of apically extruded debris during root canal retreatment with two different rotary systems followed by a self-adjusting file.

    Science.gov (United States)

    Cakici, Fatih; Cakici, Elif B; Küçükekenci, Funda Fundaoglu

    2016-02-01

    To compare the amount of apically extruded debris during root canal retreatment using ProTaper retreatment system (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper retreatment system with Self-Adjusting File (SAF) system (ReDent-Nova, Ra'anana, Israel), Mtwo retreatment system (VDW, Munich, Germany), Mtwo retreatment system with SAF instruments. In total, 72 extracted human mandibular incisor teeth were used. All root canals were prepared with ProTaper universal (Dentsply Maillefer) up to F2 file and filled with gutta percha and AH plus sealer using cold lateral condensation before being assembled randomly into 4 groups (n = 18 each). Root canal filling materials were removed using the ProTaper retreatment system, the ProTaper retreatment system followed by SAF system, Mtwo retreatment system and Mtwo retreatment system followed by SAF system. Debris extruded apically during the removal of canal filling material was collected into preweighed Eppendorf tubes. The tubes were then stored in an incubator at 70°C for 5 days. The weight of the dry extruded debris was established by subtracting the preretreatment and postretreatment weight of the Eppendorf tubes for each group. The data obtained were analyzed using Kruskal-Wallis test. All retreatment techniques caused the apical extrusion of debris. There was no significant difference between the groups statistically (p>0.05). The results of this study showed that SAF system after Mtwo retreatment system and ProTaper retreatment system for improving retreatment has no significant effect on the amount of debris extruded apically.

  14. FORTRAN data files transference from VAX/VMS to ALPHA/UNIX

    International Nuclear Information System (INIS)

    Sanchez, E.; Milligen, B.Ph. van

    1997-01-01

    Several tools have been developed to access the TJ-I and TJ-IU databases, which currently reside in VAX/VMS servers, from the TJ-II Data Acquisition System DEC ALPHA 8400 server. The TJ-I/TJ-IU databases are not homogeneous and contain several types of data files, namely, SADE. CAMAC and FORTRAN un formatted files. The tools presented in this report allow one to transfer CAMAC and those FORTRAN un formatted files defined herein. from a VAX/VMS server, for data manipulation on the ALPHA/Digital UNIX server. (Author) 5 refs

  15. JENDL Dosimetry File

    International Nuclear Information System (INIS)

    Nakazawa, Masaharu; Iguchi, Tetsuo; Kobayashi, Katsuhei; Iwasaki, Shin; Sakurai, Kiyoshi; Ikeda, Yujiro; Nakagawa, Tsuneo.

    1992-03-01

    The JENDL Dosimetry File based on JENDL-3 was compiled and integral tests of cross section data were performed by the Dosimetry Integral Test Working Group of the Japanese Nuclear Data Committee. Data stored in the JENDL Dosimetry File are the cross sections and their covariance data for 61 reactions. The cross sections were mainly taken from JENDL-3 and the covariances from IRDF-85. For some reactions, data were adopted from other evaluated data files. The data are given in the neutron energy region below 20 MeV in both of point-wise and group-wise files in the ENDF-5 format. In order to confirm reliability of the data, several integral tests were carried out; comparison with the data in IRDF-85 and average cross sections measured in fission neutron fields, fast reactor spectra, DT neutron fields and Li(d, n) neutron fields. As a result, it has been found that the JENDL Dosimetry File gives better results than IRDF-85 but there are some problems to be improved in future. The contents of the JENDL Dosimetry File and the results of the integral tests are described in this report. All of the dosimetry cross sections are shown in a graphical form. (author) 76 refs

  16. JENDL Dosimetry File

    Energy Technology Data Exchange (ETDEWEB)

    Nakazawa, Masaharu; Iguchi, Tetsuo [Tokyo Univ. (Japan). Faculty of Engineering; Kobayashi, Katsuhei [Kyoto Univ., Kumatori, Osaka (Japan). Research Reactor Inst.; Iwasaki, Shin [Tohoku Univ., Sendai (Japan). Faculty of Engineering; Sakurai, Kiyoshi; Ikeda, Yujior; Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1992-03-15

    The JENDL Dosimetry File based on JENDL-3 was compiled and integral tests of cross section data were performed by the Dosimetry Integral Test Working Group of the Japanese Nuclear Data Committee. Data stored in the JENDL Dosimetry File are the cross sections and their covariance data for 61 reactions. The cross sections were mainly taken from JENDL-3 and the covariances from IRDF-85. For some reactions, data were adopted from other evaluated data files. The data are given in the neutron energy region below 20 MeV in both of point-wise and group-wise files in the ENDF-5 format. In order to confirm reliability of the data, several integral tests were carried out; comparison with the data in IRDF-85 and average cross sections measured in fission neutron fields, fast reactor spectra, DT neutron fields and Li(d,n) neutron fields. As a result, it has been found that the JENDL Dosimetry File gives better results than IRDF-85 but there are some problems to be improved in future. The contents of the JENDL Dosimetry File and the results of the integral tests are described in this report. All of the dosimetry cross sections are shown in a graphical form.

  17. Automated quality control in a file-based broadcasting workflow

    Science.gov (United States)

    Zhang, Lina

    2014-04-01

    Benefit from the development of information and internet technologies, television broadcasting is transforming from inefficient tape-based production and distribution to integrated file-based workflows. However, no matter how many changes have took place, successful broadcasting still depends on the ability to deliver a consistent high quality signal to the audiences. After the transition from tape to file, traditional methods of manual quality control (QC) become inadequate, subjective, and inefficient. Based on China Central Television's full file-based workflow in the new site, this paper introduces an automated quality control test system for accurate detection of hidden troubles in media contents. It discusses the system framework and workflow control when the automated QC is added. It puts forward a QC criterion and brings forth a QC software followed this criterion. It also does some experiments on QC speed by adopting parallel processing and distributed computing. The performance of the test system shows that the adoption of automated QC can make the production effective and efficient, and help the station to achieve a competitive advantage in the media market.

  18. Transmission of the environmental radiation data files on the internet

    International Nuclear Information System (INIS)

    Yamaguchi, Yoshiaki; Saito, Tadashi; Yamamoto, Takayoshi; Matsumoto, Atsushi; Kyoh, Bunkei

    1999-01-01

    Recently, any text or data file has come to be transportable through the Internet with a personal computer. It is, however, restricted by selection of monitoring point to lay the cable because the personal circuit is generally used in case of continuous type environmental monitors. This is the reason why we have developed an environmental monitoring system that can transmit radiation data files on the Internet. Both 3''φ x 3'' NaI(Tl) detector and Thermo-Hydrometer are installed in the monitoring post of this system, and the data files of those detectors are transmitted from a personal computer at the monitoring point to Radioisotope Research Center of Osaka University. Environmental monitoring data from remote places have easily been obtained due to the data transmission through the Internet. Moreover, the system brings a higher precision of the environmental monitoring data because it includes the energy information of γ-rays. If it is possible to maintain the monitors at remote places, this system could execute the continuous environmental monitoring over the wide area. (author)

  19. Transmission of the environmental radiation data files on the internet

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, Yoshiaki; Saito, Tadashi; Yamamoto, Takayoshi [Osaka Univ., Suita (Japan). Radioisotope Research Center; Matsumoto, Atsushi; Kyoh, Bunkei

    1999-01-01

    Recently, any text or data file has come to be transportable through the Internet with a personal computer. It is, however, restricted by selection of monitoring point to lay the cable because the personal circuit is generally used in case of continuous type environmental monitors. This is the reason why we have developed an environmental monitoring system that can transmit radiation data files on the Internet. Both 3``{phi} x 3`` NaI(Tl) detector and Thermo-Hydrometer are installed in the monitoring post of this system, and the data files of those detectors are transmitted from a personal computer at the monitoring point to Radioisotope Research Center of Osaka University. Environmental monitoring data from remote places have easily been obtained due to the data transmission through the Internet. Moreover, the system brings a higher precision of the environmental monitoring data because it includes the energy information of {gamma}-rays. If it is possible to maintain the monitors at remote places, this system could execute the continuous environmental monitoring over the wide area. (author)

  20. Evaluation of clinical data in childhood asthma. Application of a computer file system

    International Nuclear Information System (INIS)

    Fife, D.; Twarog, F.J.; Geha, R.S.

    1983-01-01

    A computer file system was used in our pediatric allergy clinic to assess the value of chest roentgenograms and hemoglobin determinations used in the examination of patients and to correlate exposure to pets and forced hot air with the severity of asthma. Among 889 children with asthma, 20.7% had abnormal chest roentgenographic findings, excluding hyperinflation and peribronchial thickening, and 0.7% had abnormal hemoglobin values. Environmental exposure to pets or forced hot air was not associated with increased severity of asthma, as assessed by five measures of outcome: number of medications administered, requirement for corticosteroids, frequency of clinic visits, frequency of emergency room visits, and frequency of hospitalizations

  1. 29 CFR 1611.13 - Specific Exemptions-Charge and complaint files

    Science.gov (United States)

    2010-07-01

    ...)(2) of the Act, 5 U.S.C. 552a(k)(2), systems EEOC-1 (Age and Equal Pay Act Discrimination Case Files... Employment Act, the Equal Pay Act, the Americans with Disabilities Act, the Rehabilitation Act, and the... in it. (c) Subject individuals of the files in EEOC-1 (Age and Equal Pay Act Discrimination Case...

  2. Hybrid cryptosystem for image file using elgamal and double playfair cipher algorithm

    Science.gov (United States)

    Hardi, S. M.; Tarigan, J. T.; Safrina, N.

    2018-03-01

    In this paper, we present an implementation of an image file encryption using hybrid cryptography. We chose ElGamal algorithm to perform asymmetric encryption and Double Playfair for the symmetric encryption. Our objective is to show that these algorithms are capable to encrypt an image file with an acceptable running time and encrypted file size while maintaining the level of security. The application was built using C# programming language and ran as a stand alone desktop application under Windows Operating System. Our test shows that the system is capable to encrypt an image with a resolution of 500×500 to a size of 976 kilobytes with an acceptable running time.

  3. SHARAF: The Canadian Shared Authority File Project.

    Science.gov (United States)

    MacIntosh, Helen

    1982-01-01

    Describes history, operating procedures, and current activities of group of users of the University of Toronto Library Automation System (UTLAS) who cooperated with each other, the bibliographic utility, and the National Library of Canada to produce an automated authority control system, termed Shared Authority File (SHARAF). Five references are…

  4. 76 FR 43679 - Filing via the Internet; Notice of Additional File Formats for efiling

    Science.gov (United States)

    2011-07-21

    ... list of acceptable file formats the four-character file extensions for Microsoft Office 2007/2010... files from Office 2007 or Office 2010 in an Office 2003 format prior to submission. Dated: July 15, 2011...

  5. UPIN Group File

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Group Unique Physician Identifier Number (UPIN) File is the business entity file that contains the group practice UPIN and descriptive information. It does NOT...

  6. Interoperability format translation and transformation between IFC architectural design file and simulation file formats

    Science.gov (United States)

    Chao, Tian-Jy; Kim, Younghun

    2015-01-06

    Automatically translating a building architecture file format (Industry Foundation Class) to a simulation file, in one aspect, may extract data and metadata used by a target simulation tool from a building architecture file. Interoperability data objects may be created and the extracted data is stored in the interoperability data objects. A model translation procedure may be prepared to identify a mapping from a Model View Definition to a translation and transformation function. The extracted data may be transformed using the data stored in the interoperability data objects, an input Model View Definition template, and the translation and transformation function to convert the extracted data to correct geometric values needed for a target simulation file format used by the target simulation tool. The simulation file in the target simulation file format may be generated.

  7. File Detection On Network Traffic Using Approximate Matching

    Directory of Open Access Journals (Sweden)

    Frank Breitinger

    2014-09-01

    Full Text Available In recent years, Internet technologies changed enormously and allow faster Internet connections, higher data rates and mobile usage. Hence, it is possible to send huge amounts of data / files easily which is often used by insiders or attackers to steal intellectual property. As a consequence, data leakage prevention systems (DLPS have been developed which analyze network traffic and alert in case of a data leak. Although the overall concepts of the detection techniques are known, the systems are mostly closed and commercial.Within this paper we present a new technique for network trac analysis based on approximate matching (a.k.a fuzzy hashing which is very common in digital forensics to correlate similar files. This paper demonstrates how to optimize and apply them on single network packets. Our contribution is a straightforward concept which does not need a comprehensive conguration: hash the file and store the digest in the database. Within our experiments we obtained false positive rates between 10-4 and 10-5 and an algorithm throughput of over 650 Mbit/s.

  8. 12 CFR 5.4 - Filing required.

    Science.gov (United States)

    2010-01-01

    ... CORPORATE ACTIVITIES Rules of General Applicability § 5.4 Filing required. (a) Filing. A depository institution shall file an application or notice with the OCC to engage in corporate activities and... advise an applicant through a pre-filing communication to send the filing or submission directly to the...

  9. BIBLIO: A Reprint File Management Algorithm

    Science.gov (United States)

    Zelnio, Robert N.; And Others

    1977-01-01

    The development of a simple computer algorithm designed for use by the individual educator or researcher in maintaining and searching reprint files is reported. Called BIBLIO, the system is inexpensive and easy to operate and maintain without sacrificing flexibility and utility. (LBH)

  10. Huygens file service and storage architecture

    NARCIS (Netherlands)

    Bosch, H.G.P.; Mullender, Sape J.; Stabell-Kulo, Tage; Stabell-Kulo, Tage

    1993-01-01

    The Huygens file server is a high-performance file server which is able to deliver multi-media data in a timely manner while also providing clients with ordinary “Unix” like file I/O. The file server integrates client machines, file servers and tertiary storage servers in the same storage

  11. Huygens File Service and Storage Architecture

    NARCIS (Netherlands)

    Bosch, H.G.P.; Mullender, Sape J.; Stabell-Kulo, Tage; Stabell-Kulo, Tage

    1993-01-01

    The Huygens file server is a high-performance file server which is able to deliver multi-media data in a timely manner while also providing clients with ordinary “Unix” like file I/O. The file server integrates client machines, file servers and tertiary storage servers in the same storage

  12. Enkripsi dan Dekripsi File dengan Algoritma Blowfish pada Perangkat Mobile Berbasis Android

    Directory of Open Access Journals (Sweden)

    Siswo Wardoyo

    2016-03-01

    Full Text Available Cryptography is one of the ways used to secure data in the form of a file with encrypt files so that others are not entitled to know the file is private and confidential. One method is the algorithm Blowfish Cryptography which is a symmetric key using the algorithm to perform encryption and decryption. Applications that are built can perform file encryption-shaped images, videos, and documents. These applications can be running on a mobile phone that has a minimal operating system Android version 2.3. The software used to build these applications is Eclipse. The results of this research indicate that applications built capable of performing encryption and decryption. The results file encryption makes files into another unknown meaning. By using the keys numbered 72 bits or 9 character takes 1,49x108 years to break it with the speed it’s computation is 106 key/sec.

  13. 76 FR 52323 - Combined Notice of Filings; Filings Instituting Proceedings

    Science.gov (United States)

    2011-08-22

    .... Applicants: Young Gas Storage Company, Ltd. Description: Young Gas Storage Company, Ltd. submits tariff..., but intervention is necessary to become a party to the proceeding. The filings are accessible in the.... More detailed information relating to filing requirements, interventions, protests, and service can be...

  14. Comparative evaluation of fracture and defect in reciproc and rotary files in severe curved root canals

    Directory of Open Access Journals (Sweden)

    Mahdis Bagherian

    2015-03-01

    Full Text Available Introduction: Root canal instrumentation is an important phase in root canal therapy. Since success in endodontic treatment depends on file defect and fracture, the aim of this study was to compare the evaluation of defect and fracture in rotary and reciproc files in severe curved root canals. Materials & Methods: In this experimental study, 60 mesial canals of human closed apex molars with more than 30° canal curvature were randomly divided into two groups. In first group M-two rotary files number# 15, 20, and 25 and in second group R25 reciproc file were used for filing, respectively. A ×8 magnifier was applied to evaluate the defect or fracture presence in each side and if it were observed, a new file would be replaced. Therefore, the number of prepared canals with each file and fractured or defective files and the place of fracture in root canal were recorded. Kaplan Meier curve and log rank test were done by using SPSS v.22. Results: In rotary group, seven and two files were fractured and defected, respectively and four files were fractured and no defect was observed in reciproc group. Although the mean of the number of prepared canals until fracture or defect in rotary and reciproc groups was 3.3 and 7.06, respectively, there were no significant differences between two systems. All file’s fractures occurred in apical regions . Conclusion: The results showed that there was no significant difference in defects or fractures of rotary and reciproc systems. Reciproc instruments can be more effective than rotary ones because the root canal preparation in rotary instruments is longer than in reciproc system.

  15. Utilizing HDF4 File Content Maps for the Cloud

    Science.gov (United States)

    Lee, Hyokyung Joe

    2016-01-01

    We demonstrate a prototype study that HDF4 file content map can be used for efficiently organizing data in cloud object storage system to facilitate cloud computing. This approach can be extended to any binary data formats and to any existing big data analytics solution powered by cloud computing because HDF4 file content map project started as long term preservation of NASA data that doesn't require HDF4 APIs to access data.

  16. Documentation of CATHENA input files for the APOLLO computer

    International Nuclear Information System (INIS)

    1988-06-01

    Input files created for the VAX version of the CATHENA two-fluid code have been modified and documented for simulation on the AECB's APOLLO computer system. The input files describe the RD-14 thermalhydraulic loop, the RD-14 steam generator, the RD-12 steam generator blowdown test facility, the Stern Laboratories Cold Water Injection Facility (CWIT), and a CANDU 600 reactor. Sample CATHENA predictions are given and compared with experimental results where applicable. 24 refs

  17. Students' Acceptance of File Sharing Systems as a Tool for Sharing Course Materials: The Case of Google Drive

    Science.gov (United States)

    Sadik, Alaa

    2017-01-01

    Students' perceptions about both ease of use and usefulness are fundamental factors in determining their acceptance and successful use of technology in higher education. File sharing systems are one of these technologies and can be used to manage and deliver course materials and coordinate virtual teams. The aim of this study is to explore how…

  18. A new insight into the oscillation characteristics of endosonic files used in dentistry

    International Nuclear Information System (INIS)

    Lea, S C; Walmsley, A D; Lumley, P J; Landini, G

    2004-01-01

    The aim of this study was to assess the oscillation characteristics of unconstrained endosonic files using a scanning laser vibrometer (SLV). Factors investigated included file vibration frequency and node/antinode location as well as the variation in file displacement amplitude due to increasing generator power setting. A 30 kHz Mini Piezon generator (Electro-Medical Systems, Switzerland) was used in conjunction with a no. 15 and no. 35 K-file. Each file was fixed in position with the long axis of the file perpendicular to the SLV camera head. The laser from the SLV was scanned over the length of the oscillating file for generator power settings 1 to 5 (minimum to half power). Measurements were repeated ten times. The fundamental vibration frequency for both files was 27.50 kHz. Scans of each file showed the positions of nodes/anti-nodes along the file length. The no. 15 file demonstrated no significant variation in its mean maximum displacement amplitude with increasing generator power, except at power setting 5, where a decrease in displacement amplitude was observed. The no. 35 file showed a general increase in mean maximum displacement amplitude with increasing power setting, except at power setting 4 where a 65% decrease in displacement amplitude occurred. In conclusion, scanning laser vibrometry is an effective method for assessing endosonic file vibration characteristics. The SLV was able to demonstrate that (unloaded) file vibration displacement amplitude does not increase linearly with increasing generator power. Further work is being performed on a greater variety of files and generators. Vibration characteristics of files under various loads and varying degrees of constraint should also be investigated

  19. Network File - TP Atlas | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available at file For CSML (Cell System Markup Language), see also the CSML website. CSML files may be graphically vie... and simulated at Cell Illustrator Online. For these pieces of software, see also the Cell Illustrator websi...te or the Cell Illustrator Online website. Legend in Fundamental Biology Legend in Medicine/Pharmacology Leg

  20. Adobe acrobat: an alternative electronic teaching file construction methodology independent of HTML restrictions.

    Science.gov (United States)

    Katzman, G L

    2001-03-01

    The goal of the project was to create a method by which an in-house digital teaching file could be constructed that was simple, inexpensive, independent of hypertext markup language (HTML) restrictions, and appears identical on multiple platforms. To accomplish this, Microsoft PowerPoint and Adobe Acrobat were used in succession to assemble digital teaching files in the Acrobat portable document file format. They were then verified to appear identically on computers running Windows, Macintosh Operating Systems (OS), and the Silicon Graphics Unix-based OS as either a free-standing file using Acrobat Reader software or from within a browser window using the Acrobat browser plug-in. This latter display method yields a file viewed through a browser window, yet remains independent of underlying HTML restrictions, which may confer an advantage over simple HTML teaching file construction. Thus, a hybrid of HTML-distributed Adobe Acrobat generated WWW documents may be a viable alternative for digital teaching file construction and distribution.

  1. FHEO Filed Cases

    Data.gov (United States)

    Department of Housing and Urban Development — The dataset is a list of all the Title VIII fair housing cases filed by FHEO from 1/1/2007 - 12/31/2012 including the case number, case name, filing date, state and...

  2. A comparison of apical transportation between FlexMaster and Twisted Files rotary instruments.

    Science.gov (United States)

    Duran-Sindreu, Fernando; García, Marc; Olivieri, Juan Gonzalo; Mercadé, Montse; Morelló, Sergio; Roig, Miguel

    2012-07-01

    The aim of this study was to evaluate apical transportation in root canals after the use of Twisted Files (TF; SybronEndo, Orange, CA) and FlexMaster (VDW, Munich, Germany) #40/04 rotary files. A double-digital radiographic technique was used to compare apical transportation between the TF and FlexMaster systems. Each rotary system was used to instrument mesial canals from 80 extracted mandibular molars. The central axes of the file imaged before instrumentation (#15 K-file) and the master apical rotary file (#40/04) were superimposed digitally. AutoCAD 2008 (Autodesk Inc, San Rafael, CA) was used to measure apical transportation at 0.5 mm from the working length (WL). The data were analyzed using the Student's t test, and significance was set at P < .05. The mean amount of apical transportation at 0.5 mm from the WL was 0.17 ± 0.09 mm for the FlexMaster group and 0.19 ± 0.12 mm for the TF group. No statistically significant differences in apical transportation were found between the 2 groups. Under the conditions of the study, no statistically significant differences in apical transportation were observed between FlexMaster and TF rotary files. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  3. Characteristics of file sharing and peer to peer networking | Opara ...

    African Journals Online (AJOL)

    Characteristics of file sharing and peer to peer networking. ... distributing or providing access to digitally stored information, such as computer programs, ... including in multicast systems, anonymous communications systems, and web caches.

  4. Next generation WLCG File Transfer Service (FTS)

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    LHC experiments at CERN and worldwide utilize WLCG resources and middleware components to perform distributed computing tasks. One of the most important tasks is reliable file replication. It is a complex problem, suffering from transfer failures, disconnections, transfer duplication, server and network overload, differences in storage systems, etc. To address these problems, EMI and gLite have provided the independent File Transfer Service (FTS) and Grid File Access Library (GFAL) tools. Their development started almost a decade ago, in the meantime, requirements in data management have changed - the old architecture of FTS and GFAL cannot keep support easily these changes. Technology has also been progressing: FTS and GFAL do not fit into the new paradigms (cloud, messaging, for example). To be able to serve the next stage of LHC data collecting (from 2013), we need a new generation of  these tools: FTS 3 and GFAL 2. We envision a service requiring minimal configuration, which can dynamically adapt to the...

  5. Request queues for interactive clients in a shared file system of a parallel computing system

    Science.gov (United States)

    Bent, John M.; Faibish, Sorin

    2015-08-18

    Interactive requests are processed from users of log-in nodes. A metadata server node is provided for use in a file system shared by one or more interactive nodes and one or more batch nodes. The interactive nodes comprise interactive clients to execute interactive tasks and the batch nodes execute batch jobs for one or more batch clients. The metadata server node comprises a virtual machine monitor; an interactive client proxy to store metadata requests from the interactive clients in an interactive client queue; a batch client proxy to store metadata requests from the batch clients in a batch client queue; and a metadata server to store the metadata requests from the interactive client queue and the batch client queue in a metadata queue based on an allocation of resources by the virtual machine monitor. The metadata requests can be prioritized, for example, based on one or more of a predefined policy and predefined rules.

  6. 76 FR 62092 - Filing Procedures

    Science.gov (United States)

    2011-10-06

    ... INTERNATIONAL TRADE COMMISSION Filing Procedures AGENCY: International Trade Commission. ACTION: Notice of issuance of Handbook on Filing Procedures. SUMMARY: The United States International Trade Commission (``Commission'') is issuing a Handbook on Filing Procedures to replace its Handbook on Electronic...

  7. 12 CFR 1780.9 - Filing of papers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Filing of papers. 1780.9 Section 1780.9 Banks... papers. (a) Filing. Any papers required to be filed shall be addressed to the presiding officer and filed... Director or the presiding officer. All papers filed by electronic media shall also concurrently be filed in...

  8. 14 CFR 11.45 - Where and when do I file my comments?

    Science.gov (United States)

    2010-01-01

    ... you do not follow the electronic filing instructions at the Federal Docket Management System Web site... do I file my comments? (a) Send your comments to the location specified in the rulemaking document on which you are commenting. If you are asked to send your comments to the Federal Document Management...

  9. Distributing File-Based Data to Remote Sites Within the BABAR Collaboration

    International Nuclear Information System (INIS)

    Gowdy, Stephen J.

    2002-01-01

    BABAR [1] uses two formats for its data: Objectivity database and root [2] files. This poster concerns the distribution of the latter--for Objectivity data see [3]. The BABAR analysis data is stored in root files--one per physics run and analysis selection channel--maintained in a large directory tree. Currently BABAR has more than 4.5 TBytes in 200,000 root files. This data is (mostly) produced at SLAC, but is required for analysis at universities and research centers throughout the us and Europe. Two basic problems confront us when we seek to import bulk data from slac to an institute's local storage via the network. We must determine which files must be imported (depending on the local site requirements and which files have already been imported), and we must make the optimum use of the network when transferring the data. Basic ftp-like tools (ftp, scp, etc) do not attempt to solve the first problem. More sophisticated tools like rsync [4], the widely-used mirror/synchronization program, compare local and remote file systems, checking for changes (based on file date, size and, if desired, an elaborate checksum) in order to only copy new or modified files. However rsync allows for only limited file selection. Also when, as in BABAR, an extremely large directory structure must be scanned, rsync can take several hours just to determine which files need to be copied. Although rsync (and scp) provides on-the-fly compression, it does not allow us to optimize the network transfer by using multiple streams, adjusting the tcp window size, or separating encrypted authentication from unencrypted data channels

  10. Distributing file-based data to remote sites within the BABAR collaboration

    International Nuclear Information System (INIS)

    Adye, T.; Dorigo, A.; Forti, A.; Leonardi, E.

    2001-01-01

    BABAR uses two formats for its data: Objectivity database and ROOT files. This poster concerns the distribution of the latter--for Objectivity data see. The BABAR analysis data is stored in ROOT files--one per physics run and analysis selection channel-maintained in a large directory tree. Currently BABAR has more than 4.5 TBytes in 200,00- ROOT files. This data is (mostly) produced at SLAC, but is required for analysis at universities and research centres throughout the US and Europe. Two basic problems confront us when we seek to import bulk data from SLAC to an institute's local storage via the network. We must determine which files must be imported (depending on the local site requirements and which files have already been imported), and the authors must make the optimum use of the network when transferring the data. Basic ftp-like tools (ftp, scp, etc) do not attempt to solve the first problem. More sophisticated tools like rsync, the widely-used mirror/synchronisation program, compare local and remote file systems, checking for changes (based on file date, size and, if desired, an elaborate checksum) in order to only copy new or modified files. However rsync allows for only limited file selection. Also when, as in BABAR, an extremely large directory structure must be scanned, rsync can take several hours just to determine which files need to be copied. Although rsync (and scp) provides on-the-fly compression, it does not allow us to optimise the network transfer by using multiple streams, adjusting the TCP window size, or separating encrypted authentication from unencrypted data channels

  11. Persepsi Wajib Pajak Mengenai E-Filing dan Pengaruhnya terhadap Tingkat Kepatuhan Wajib Pajak Orang Pribadi dalam Melaporkan Pajak

    OpenAIRE

    Gunawan, Teddy; Suprapti, Eny; Kurniawati, Eris Tri

    2017-01-01

    This research is aimed to examine the effect of taxpayer's perception toward e-Filing system ofindividual taxpayer's compliance in tax reporting. This research is associative research. Intaxpayer's perception there are e-Filing usefulness variable, e-Filing ease variable, e-Filingcomplexcity, e-Filing security and privacy variable and e-Filing readiness. The population of thisresearch is individual taxpayer listed in Tax Office Pratam Batu. Sampling used of this researchis convenience samplin...

  12. Activation cross section data file, (1)

    International Nuclear Information System (INIS)

    Yamamuro, Nobuhiro; Iijima, Shungo.

    1989-09-01

    To evaluate the radioisotope productions due to the neutron irradiation in fission of fusion reactors, the data for the activation cross sections ought to be provided. It is planning to file more than 2000 activation cross sections at final. In the current year, the neutron cross sections for 14 elements from Ni to W have been calculated and evaluated in the energy range 10 -5 to 20 MeV. The calculations with a simplified-input nuclear cross section calculation system SINCROS were described, and another method of evaluation which is consistent with the JENDL-3 were also mentioned. The results of cross section calculation are in good agreement with experimental data and they were stored in the file 8, 9 and 10 of ENDF/B format. (author)

  13. 12 CFR 16.33 - Filing fees.

    Science.gov (United States)

    2010-01-01

    ... Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY SECURITIES OFFERING DISCLOSURE RULES § 16.33 Filing fees. (a) Filing fees must accompany certain filings made under the provisions of this part... Comptroller of the Currency Fees published pursuant to § 8.8 of this chapter. (b) Filing fees must be paid by...

  14. 75 FR 4689 - Electronic Tariff Filings

    Science.gov (United States)

    2010-01-29

    ... elements ``are required to properly identify the nature of the tariff filing, organize the tariff database... (or other pleading) and the Type of Filing code chosen will be resolved in favor of the Type of Filing...'s wish expressed in its transmittal letter or in other pleadings, the Commission may not review a...

  15. Very wide register : an asymmetric register file organization for low power embedded processors.

    NARCIS (Netherlands)

    Raghavan, P.; Lambrechts, A.; Jayapala, M.; Catthoor, F.; Verkest, D.T.M.L.; Corporaal, H.

    2007-01-01

    In current embedded systems processors, multi-ported register files are one of the most power hungry parts of the processor, even when they are clustered. This paper presents a novel register file architecture, which has single ported cells and asymmetric interfaces to the memory and to the

  16. 78 FR 20907 - Combined Notice of Filings #2

    Science.gov (United States)

    2013-04-08

    ... Independent Transmission System Operator, Inc. submits 2013-03-29 MidAm Att O Depreciation Rates to be...-Retirement Benefits Other than Pensions of Public Service Company of Colorado. Filed Date: 3/29/13. Accession...

  17. Micro computed tomography evaluation of the Self-adjusting file and ProTaper Universal system on curved mandibular molars.

    Science.gov (United States)

    Serefoglu, Burcu; Piskin, Beyser

    2017-09-26

    The aim of this investigation was to compare the cleaning and shaping efficiency of Self-adjusting file and Protaper, and to assess the correlation between root canal curvature and working time in mandibular molars using micro-computed tomography. Twenty extracted mandibular molars instrumented with Protaper and Self-adjusting file and the total working time was measured in mesial canals. The changes in canal volume, surface area and structure model index, transportation, uninstrumented area and the correlation between working-time and the curvature were analyzed. Although no statistically significant difference was observed between two systems in distal canals (p>0.05), a significantly higher amount of removed dentin volume and lower uninstrumented area were provided by Protaper in mesial canals (p<0.0001). A correlation between working-time and the canal-curvature was also observed in mesial canals for both groups (SAFr 2 =0.792, p<0.0004, PTUr 2 =0.9098, p<0.0001).

  18. The Effect of Volume of Transaction On The Intention Towards Tax E-filing

    Directory of Open Access Journals (Sweden)

    Aziz Saliza Abdul

    2017-01-01

    Full Text Available Volume of transaction is specifically referring to number of clients or return forms dealing by tax agents/preparers. This variable does play role even though there is less empirical evidence on this matter. This paper is basically to explore the effect of volume of transaction that could possibly influence the acceptance of tax e-filing system as it did in other areas of transaction i.e. court cases. Undoubtedly, it is proved to be significantly influenced the behavioural intention towards tax e-filing acceptability in Malaysia. The tax agents/preparers are randomly selected in this study from the list provided in the Inland Revenue Board of Malaysia (IRBM website. The responds are analysed via Partial Least Square (PLS method which produce the significant results among the low and high volume of transaction of tax e-filing which support the fact that volume does matter in the decision of acceptability of tax e-filing system in Malaysia.

  19. 78 FR 75554 - Combined Notice of Filings

    Science.gov (United States)

    2013-12-12

    ...-000. Applicants: Young Gas Storage Company, Ltd. Description: Young Fuel Reimbursement Filing to be.... Protests may be considered, but intervention is necessary to become a party to the proceeding. eFiling is... qualifying facilities filings can be found at: http://www.ferc.gov/docs-filing/efiling/filing-req.pdf . For...

  20. 5 CFR 1203.13 - Filing pleadings.

    Science.gov (United States)

    2010-01-01

    ... delivery, by facsimile, or by e-filing in accordance with § 1201.14 of this chapter. If the document was... submitted by e-filing, it is considered to have been filed on the date of electronic submission. (e... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Filing pleadings. 1203.13 Section 1203.13...

  1. Information retrieval system

    Science.gov (United States)

    Berg, R. F.; Holcomb, J. E.; Kelroy, E. A.; Levine, D. A.; Mee, C., III

    1970-01-01

    Generalized information storage and retrieval system capable of generating and maintaining a file, gathering statistics, sorting output, and generating final reports for output is reviewed. File generation and file maintenance programs written for the system are general purpose routines.

  2. 76 FR 61351 - Combined Notice of Filings #1

    Science.gov (United States)

    2011-10-04

    ... MBR Baseline Tariff Filing to be effective 9/22/2011. Filed Date: 09/22/2011. Accession Number... submits tariff filing per 35.1: ECNY MBR Re-File to be effective 9/22/2011. Filed Date: 09/22/2011... Industrial Energy Buyers, LLC submits tariff filing per 35.1: NYIEB MBR Re-File to be effective 9/22/2011...

  3. Efficacy of Two Irrigants Used with Self-Adjusting File System on Smear Layer: A Scanning Electron Microscopy Study.

    Science.gov (United States)

    Genç Şen, Özgür; Kaya, Sadullah; Er, Özgür; Alaçam, Tayfun

    2014-01-01

    Mechanical instrumentation of root canals produces a smear layer that adversely affects the root canal seal. The aim of this study was to evaluate efficacy of MTAD and citric acid solutions used with self-adjusting file (SAF) system on smear layer. Twenty-three single-rooted human teeth were used for the study. Canals were instrumented manually up to a number 20 K file size. SAF was used to prepare the root canals. The following groups were studied: Group 1: MTAD + 5.25% NaOCl, Group 2: 20% citric acid + 5.25% NaOCl, and Group 3: Control (5.25% NaOCl). All roots were split longitudinally and subjected to scanning electron microscopy. The presence of smear layer in the coronal, middle, and apical thirds was evaluated using a five-score evaluation system. Kruskal-Wallis and Mann-Whitney U tests were used for statistical analysis. In the coronal third, Group 2 exhibited the best results and was statistically different froms the other groups (P 0.05). The solutions used in Group 1 and 2 could effectively remove smear layer in most of the specimens. However, citric acid was more effective than MTAD in the three thirds of the canal.

  4. 49 CFR 1104.6 - Timely filing required.

    Science.gov (United States)

    2010-10-01

    ... offers next day delivery to Washington, DC. If the e-filing option is chosen (for those pleadings and documents that are appropriate for e-filing, as determined by reference to the information on the Board's Web site), then the e-filed pleading or document is timely filed if the e-filing process is completed...

  5. E-filing pada Kantor Pelayanan Pajak Pratama Kota Kediri

    OpenAIRE

    solikah, mar'atus; Kusumaningtyas, Dian

    2017-01-01

    AbstractThe background of this research is based on the e-filing system that came into force in order to facilitate the taxpayers in reporting the Annual Tax Return so that it could reduce the non-compliance of tax reporting. However, for its implementation, it needs accurate and clear information about the clear procedures and procedures on the use of e-filing so as to achieve taxpayer compliance in the annual SPT reporting on the Directorate General of Tax. The purpose of this research is t...

  6. TFTR data management system

    International Nuclear Information System (INIS)

    Randerson, L.; Chu, J.; Ludescher, C.; Malsbury, J.; Stark, W.

    1986-01-01

    Developments in the tokamak fusion test reactor (TFTR) data management system supporting data management system supporting data acquisition and off-line physics data reduction are described. Data from monitor points, timing channels, and transient recorder channels and other devices are acquired and stored for use by on-line tasks. Files are transferred off-line automatically. A configuration utility determines data acquired and files transferred. An event system driven by file arrival activates off-line reduction processes. A post-run process transfers files not shipped during runs. Files are archived to tape and are retrievable by digraph and shot number. Automatic skimming based on most recent access, file type, shot numbers, and user-set protection maintains the files required for post-run data reduction

  7. 12 CFR 908.25 - Filing of papers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Filing of papers. 908.25 Section 908.25 Banks... RULES OF PRACTICE AND PROCEDURE IN HEARINGS ON THE RECORD General Rules § 908.25 Filing of papers. (a) Filing. Any papers required to be filed shall be addressed to the presiding officer and filed with the...

  8. 75 FR 39230 - Combined Notice of Filings

    Science.gov (United States)

    2010-07-08

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings July 1, 2010. Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report..., July 12, 2010. Docket Numbers: RP10-922-000. Applicants: Venice Gathering System, LLC. Description...

  9. 76 FR 353 - Combined Notice of Filings

    Science.gov (United States)

    2011-01-04

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings December 22, 2010. Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund... 3, 2011. Docket Numbers: RP11-1640-000. Applicants: Venice Gathering System, L.L.C. Description...

  10. NET: an inter-computer file transfer command

    International Nuclear Information System (INIS)

    Burris, R.D.

    1978-05-01

    The NET command was defined and supported in order to facilitate file transfer between computers. Among the goals of the implementation were greatest possible ease of use, maximum power (i.e., support of a diversity of equipment and operations), and protection of the operating system

  11. Detecting Malicious Code by Binary File Checking

    Directory of Open Access Journals (Sweden)

    Marius POPA

    2014-01-01

    Full Text Available The object, library and executable code is stored in binary files. Functionality of a binary file is altered when its content or program source code is changed, causing undesired effects. A direct content change is possible when the intruder knows the structural information of the binary file. The paper describes the structural properties of the binary object files, how the content can be controlled by a possible intruder and what the ways to identify malicious code in such kind of files. Because the object files are inputs in linking processes, early detection of the malicious content is crucial to avoid infection of the binary executable files.

  12. 77 FR 74839 - Combined Notice of Filings

    Science.gov (United States)

    2012-12-18

    ..., LP. Description: National Grid LNG, LP submits tariff filing per 154.203: Adoption of NAESB Version 2... with Order to Amend NAESB Version 2.0 Filing to be effective 12/1/2012. Filed Date: 12/11/12. Accession...: Refile to comply with Order on NAESB Version 2.0 Filing to be effective 12/1/2012. Filed Date: 12/11/12...

  13. 77 FR 35371 - Combined Notice of Filings #1

    Science.gov (United States)

    2012-06-13

    .... Applicants: Duke Energy Miami Fort, LLC. Description: MBR Filing to be effective 10/1/2012. Filed Date: 6/5...-000. Applicants: Duke Energy Piketon, LLC. Description: MBR Filing to be effective 10/1/2012. Filed...-1959-000. Applicants: Duke Energy Stuart, LLC. Description: MBR Filing to be effective 10/1/2012. Filed...

  14. Efficient analysis and extraction of MS/MS result data from Mascot™ result files

    Directory of Open Access Journals (Sweden)

    Sickmann Albert

    2005-12-01

    Full Text Available Abstract Background Mascot™ is a commonly used protein identification program for MS as well as for tandem MS data. When analyzing huge shotgun proteomics datasets with Mascot™'s native tools, limits of computing resources are easily reached. Up to now no application has been available as open source that is capable of converting the full content of Mascot™ result files from the original MIME format into a database-compatible tabular format, allowing direct import into database management systems and efficient handling of huge datasets analyzed by Mascot™. Results A program called mres2x is presented, which reads Mascot™ result files, analyzes them and extracts either selected or all information in order to store it in a single file or multiple files in formats which are easier to handle downstream of Mascot™. It generates different output formats. The output of mres2x in tab format is especially designed for direct high-performance import into relational database management systems using native tools of these systems. Having the data available in database management systems allows complex queries and extensive analysis. In addition, the original peak lists can be extracted in DTA format suitable for protein identification using the Sequest™ program, and the Mascot™ files can be split, preserving the original data format. During conversion, several consistency checks are performed. mres2x is designed to provide high throughput processing combined with the possibility to be driven by other computer programs. The source code including supplement material and precompiled binaries is available via http://www.protein-ms.de and http://sourceforge.net/projects/protms/. Conclusion The database upload allows regrouping of the MS/MS results using a database management system and complex analyzing queries using SQL without the need to run new Mascot™ searches when changing grouping parameters.

  15. An Approach Using Parallel Architecture to Storage DICOM Images in Distributed File System

    International Nuclear Information System (INIS)

    Soares, Tiago S; Prado, Thiago C; Dantas, M A R; De Macedo, Douglas D J; Bauer, Michael A

    2012-01-01

    Telemedicine is a very important area in medical field that is expanding daily motivated by many researchers interested in improving medical applications. In Brazil was started in 2005, in the State of Santa Catarina has a developed server called the CyclopsDCMServer, which the purpose to embrace the HDF for the manipulation of medical images (DICOM) using a distributed file system. Since then, many researches were initiated in order to seek better performance. Our approach for this server represents an additional parallel implementation in I/O operations since HDF version 5 has an essential feature for our work which supports parallel I/O, based upon the MPI paradigm. Early experiments using four parallel nodes, provide good performance when compare to the serial HDF implemented in the CyclopsDCMServer.

  16. 77 FR 57563 - Combined Notice Of Filings #1

    Science.gov (United States)

    2012-09-18

    .... Applicants: New York Independent System Operator, Inc., Niagara Mohawk Power Corporation. Description.... Take notice that the Commission received the following electric reliability filings: Docket Numbers: RR12-13-000. Applicants: North American Electric Reliability Corporation. Description: Update to...

  17. ATLAS File and Dataset Metadata Collection and Use

    CERN Document Server

    Albrand, S; The ATLAS collaboration; Lambert, F; Gallas, E J

    2012-01-01

    The ATLAS Metadata Interface (“AMI”) was designed as a generic cataloguing system, and as such it has found many uses in the experiment including software release management, tracking of reconstructed event sizes and control of dataset nomenclature. The primary use of AMI is to provide a catalogue of datasets (file collections) which is searchable using physics criteria. In this paper we discuss the various mechanisms used for filling the AMI dataset and file catalogues. By correlating information from different sources we can derive aggregate information which is important for physics analysis; for example the total number of events contained in dataset, and possible reasons for missing events such as a lost file. Finally we will describe some specialized interfaces which were developed for the Data Preparation and reprocessing coordinators. These interfaces manipulate information from both the dataset domain held in AMI, and the run-indexed information held in the ATLAS COMA application (Conditions and ...

  18. 76 FR 63291 - Combined Notice Of Filings #1

    Science.gov (United States)

    2011-10-12

    ... filing per 35: MBR Tariff to be effective 9/23/2011. Filed Date: 09/23/2011. Accession Number: 20110923.... submits tariff filing per 35: MBR Tariff to be effective 9/23/2011. Filed Date: 09/23/2011. Accession.... submits tariff filing per 35: MBR Tariff to be effective 9/23/2011. Filed Date: 09/23/2011. Accession...

  19. Use of DBMS-10 for storage and retrieval of evaluated nuclear data files

    International Nuclear Information System (INIS)

    Dunford, C.L.

    1977-01-01

    The use of a data base management system (DBMS) for storage of, and retrieval from, the many scientific data bases maintained by the National Nuclear Data Center is currently being investigated. It would appear that a commercially available DBMS package would save the Center considerable money and manpower when adding new data files to the library and in the long-term maintenance of current data files. Current DBMS technology and experience with an internal DBMS system suggests an inherent inefficiency in processing large data networks where significant portions are accessed in a sequential manner. Such a file is the Evaluated Nuclear Data File (ENDF/B), which contains many large data tables, each one normally accessed in a sequential manner. After gaining some experience and success in small applications of the commercially available DBMS package, DBMS-10, on the Center's DECsystem-10 computer, it was decided to select a large data base as a test case before making a final decision on the implementation of DBMS-10 for all data bases. The obvious approach is to utilize the DBMS to index a random-access file. In this way one is able to increase the storage and retrieval efficiency at the one-time cost of additional programing effort. 2 figures

  20. Use of DBMS-10 for storage and retrieval of evaluated nuclear data files

    International Nuclear Information System (INIS)

    Dunford, C.L.

    1978-01-01

    The use of a data base management system (DBMS) for storage of, and retrieval from, the many scientific data bases maintained by the National Nuclear Data Center is currently being investigated. It would appear that a commercially available DBMS package would save the Center considerable money and manpower when adding new data files to our library and in the long-term maintenance of our current data files. Current DBMS technology and experience with our internal DBMS system suggests an inherent inefficiency in processing large data networks where significant portions are accessed in a sequential manner. Such a file is the Evaluated Nuclear Data File (ENDF/B) which contains many large data tables, each one normally accessed in a sequential manner. After gaining some experience and success in small applications of the commercially available DBMS package, DBMS-10, on the Center's DECsystem-10 computer, it was decided to select one of our large data bases as a test case before making a final decision on the implementation of DBMS-10 for all our data bases. The obvious approach is to utilize the DBMS to index a random access file. In this way one is able to increase the storage and retrieval efficiency at the one-time cost of additional programming effort

  1. Preservation of root canal anatomy using self-adjusting file instrumentation with glide path prepared by 20/0.02 hand files versus 20/0.04 rotary files

    Science.gov (United States)

    Jain, Niharika; Pawar, Ajinkya M.; Ukey, Piyush D.; Jain, Prashant K.; Thakur, Bhagyashree; Gupta, Abhishek

    2017-01-01

    Objectives: To compare the relative axis modification and canal concentricity after glide path preparation with 20/0.02 hand K-file (NITIFLEX®) and 20/0.04 rotary file (HyFlex™ CM) with subsequent instrumentation with 1.5 mm self-adjusting file (SAF). Materials and Methods: One hundred and twenty ISO 15, 0.02 taper, Endo Training Blocks (Dentsply Maillefer, Ballaigues, Switzerland) were acquired and randomly divided into following two groups (n = 60): group 1, establishing glide path till 20/0.02 hand K-file (NITIFLEX®) followed by instrumentation with 1.5 mm SAF; and Group 2, establishing glide path till 20/0.04 rotary file (HyFlex™ CM) followed by instrumentation with 1.5 mm SAF. Pre- and post-instrumentation digital images were processed with MATLAB R 2013 software to identify the central axis, and then superimposed using digital imaging software (Picasa 3.0 software, Google Inc., California, USA) taking five landmarks as reference points. Student's t-test for pairwise comparisons was applied with the level of significance set at 0.05. Results: Training blocks instrumented with 20/0.04 rotary file and SAF were associated less deviation in canal axis (at all the five marked points), representing better canal concentricity compared to those, in which glide path was established by 20/0.02 hand K-files followed by SAF instrumentation. Conclusion: Canal geometry is better maintained after SAF instrumentation with a prior glide path established with 20/0.04 rotary file. PMID:28855752

  2. 76 FR 28018 - Combined Notice of Filings #1

    Science.gov (United States)

    2011-05-13

    ... tariff filing per 35.13(a)(2)(iii: Information Policy Revisions to be effective 6/20/ 2011. Filed Date... Interconnection, L.L.C. Description: PJM Interconnection, L.L.C. submits tariff filing per 35.13(a)(2)(iii: Queue... New Mexico submits tariff filing per 35.13(a)(2)(iii: PNM LGIP Filing to be effective 7/5/2011. Filed...

  3. 75 FR 62381 - Combined Notice of Filings #2

    Science.gov (United States)

    2010-10-08

    ... filing per 35.12: MeadWestvaco Virginia MBR Filing to be effective 9/ 28/2010. Filed Date: 09/29/2010... submits tariff filing per 35.12: City Power MBR Tariff to be effective 9/30/2010. Filed Date: 09/29/2010... Baseline MBR Tariff to be effective 9[sol]29[sol]2010. Filed Date: 09/29/2010. Accession Number: 20100929...

  4. Library of files of evaluated neutron data

    International Nuclear Information System (INIS)

    Blokhin, A.I.; Ignatyuk, A.V.; Koshcheev, V.N.; Kuz'minov, B.D.; Manokhin, V.N.; Manturov, G.N.; Nikolaev, M.N.

    1988-01-01

    It is reported about development of the evaluated neutron data files library which was recommended by the GKAE Nuclear Data Commission as the base of improving constant systems in neutron engeneering calculations. A short description of the library content is given and status of the library is pointed out

  5. Case file coding of child maltreatment: Methods, challenges, and innovations in a longitudinal project of youth in foster care☆

    Science.gov (United States)

    Huffhines, Lindsay; Tunno, Angela M.; Cho, Bridget; Hambrick, Erin P.; Campos, Ilse; Lichty, Brittany; Jackson, Yo

    2016-01-01

    State social service agency case files are a common mechanism for obtaining information about a child’s maltreatment history, yet these documents are often challenging for researchers to access, and then to process in a manner consistent with the requirements of social science research designs. Specifically, accessing and navigating case files is an extensive undertaking, and a task that many researchers have had to maneuver with little guidance. Even after the files are in hand and the research questions and relevant variables have been clarified, case file information about a child’s maltreatment exposure can be idiosyncratic, vague, inconsistent, and incomplete, making coding such information into useful variables for statistical analyses difficult. The Modified Maltreatment Classification System (MMCS) is a popular tool used to guide the process, and though comprehensive, this coding system cannot cover all idiosyncrasies found in case files. It is not clear from the literature how researchers implement this system while accounting for issues outside of the purview of the MMCS or that arise during MMCS use. Finally, a large yet reliable file coding team is essential to the process, however, the literature lacks training guidelines and methods for establishing reliability between coders. In an effort to move the field toward a common approach, the purpose of the present discussion is to detail the process used by one large-scale study of child maltreatment, the Studying Pathways to Adjustment and Resilience in Kids (SPARK) project, a longitudinal study of resilience in youth in foster care. The article addresses each phase of case file coding, from accessing case files, to identifying how to measure constructs of interest, to dealing with exceptions to the coding system, to coding variables reliably, to training large teams of coders and monitoring for fidelity. Implications for a comprehensive and efficient approach to case file coding are discussed. PMID

  6. 77 FR 13587 - Combined Notice of Filings

    Science.gov (United States)

    2012-03-07

    .... Applicants: Transcontinental Gas Pipe Line Company. Description: Annual Electric Power Tracker Filing... Company. Description: 2012 Annual Fuel and Electric Power Reimbursement to be effective 4/1/2012. Filed... submits tariff filing per 154.403: Storm Surcharge 2012 to be effective 4/1/2012. Filed Date: 3/1/12...

  7. 5 CFR 1201.14 - Electronic filing procedures.

    Science.gov (United States)

    2010-01-01

    ... form. (b) Matters subject to electronic filing. Subject to the registration requirement of paragraph (e) of this section, parties and representatives may use electronic filing (e-filing) to do any of the...). (d) Internet is sole venue for electronic filing. Following the instructions at e-Appeal Online, the...

  8. A scalable infrastructure for CMS data analysis based on OpenStack Cloud and Gluster file system

    Science.gov (United States)

    Toor, S.; Osmani, L.; Eerola, P.; Kraemer, O.; Lindén, T.; Tarkoma, S.; White, J.

    2014-06-01

    The challenge of providing a resilient and scalable computational and data management solution for massive scale research environments requires continuous exploration of new technologies and techniques. In this project the aim has been to design a scalable and resilient infrastructure for CERN HEP data analysis. The infrastructure is based on OpenStack components for structuring a private Cloud with the Gluster File System. We integrate the state-of-the-art Cloud technologies with the traditional Grid middleware infrastructure. Our test results show that the adopted approach provides a scalable and resilient solution for managing resources without compromising on performance and high availability.

  9. A scalable infrastructure for CMS data analysis based on OpenStack Cloud and Gluster file system

    International Nuclear Information System (INIS)

    Toor, S; Eerola, P; Kraemer, O; Lindén, T; Osmani, L; Tarkoma, S; White, J

    2014-01-01

    The challenge of providing a resilient and scalable computational and data management solution for massive scale research environments requires continuous exploration of new technologies and techniques. In this project the aim has been to design a scalable and resilient infrastructure for CERN HEP data analysis. The infrastructure is based on OpenStack components for structuring a private Cloud with the Gluster File System. We integrate the state-of-the-art Cloud technologies with the traditional Grid middleware infrastructure. Our test results show that the adopted approach provides a scalable and resilient solution for managing resources without compromising on performance and high availability.

  10. Catching errors with patient-specific pretreatment machine log file analysis.

    Science.gov (United States)

    Rangaraj, Dharanipathy; Zhu, Mingyao; Yang, Deshan; Palaniswaamy, Geethpriya; Yaddanapudi, Sridhar; Wooten, Omar H; Brame, Scott; Mutic, Sasa

    2013-01-01

    A robust, efficient, and reliable quality assurance (QA) process is highly desired for modern external beam radiation therapy treatments. Here, we report the results of a semiautomatic, pretreatment, patient-specific QA process based on dynamic machine log file analysis clinically implemented for intensity modulated radiation therapy (IMRT) treatments delivered by high energy linear accelerators (Varian 2100/2300 EX, Trilogy, iX-D, Varian Medical Systems Inc, Palo Alto, CA). The multileaf collimator machine (MLC) log files are called Dynalog by Varian. Using an in-house developed computer program called "Dynalog QA," we automatically compare the beam delivery parameters in the log files that are generated during pretreatment point dose verification measurements, with the treatment plan to determine any discrepancies in IMRT deliveries. Fluence maps are constructed and compared between the delivered and planned beams. Since clinical introduction in June 2009, 912 machine log file analyses QA were performed by the end of 2010. Among these, 14 errors causing dosimetric deviation were detected and required further investigation and intervention. These errors were the result of human operating mistakes, flawed treatment planning, and data modification during plan file transfer. Minor errors were also reported in 174 other log file analyses, some of which stemmed from false positives and unreliable results; the origins of these are discussed herein. It has been demonstrated that the machine log file analysis is a robust, efficient, and reliable QA process capable of detecting errors originating from human mistakes, flawed planning, and data transfer problems. The possibility of detecting these errors is low using point and planar dosimetric measurements. Copyright © 2013 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

  11. The effects of various exposure times in the detectability on the tips of the endodontic files in Digora

    International Nuclear Information System (INIS)

    Ko, Jee Young; Park, Chang Seo

    1997-01-01

    Digora-an intraoral digital radiography system utilizing image plate(IP) - has a dynamic range of exposure time which allows it to decrease the patient's exposure time and to increase diagnostic ability through image process sing, transmission and storage. The purpose of this study was to evaluate the Digora system by assessing the effects of various exposure times on the detectability on the tip of the endodontic file. Examining the root canals of 45 extracted sound premolars, K-files No. 10, 15, and 20 were placed at slightly varying distances from the apex. The teeth were glued onto resin-pla ster blocks. Five exposure times varying between 0.01 seconds and 0.25 seconds were used. Four observers were asked to measure the distance between the tip of the file and a reduction of crown portion, and obtained mean errors (subtracting true file length from the measured file length), comparing Digora monitors with E-plus films, which were both obtained under the same geometrical positions. The results were as follows : 1. Comparing E-plus film with Digora at 0.01 seconds, the mean errors in E-plus film showed -4.453 mm, -4.497 mm, and -3.857 mm, while the mean errors in Digora showed 0.065 mm, 0.607 mm, and 0.719 mm according to the file groups. Therefore there was a significant difference between E-plus film and Digora (P<0.05). 2. By comparison of mean errors according to the various exposure times in the Digora system, the mean error at standard deviation was the highest at 0.01 seconds was significantly lower than that at 0.12 and 0.25 seconds in No. 10 and 20 file group (P<0.05). and the standard deviation was the highest at 0.01 seconds. 3. Comparing E-plus film at 0.25 seconds with the Digora system, the mean errors showed a significant difference between E-plus at 0.25 seconds and the Digora system at 0.25 seconds in No. 10 and 20 file groups (P<0.05). 4. Comparing E-plus film at 0.25 seconds and E-plus film at 0.01 and 0.03 seconds in 10 file group (P<0.05). In

  12. High School and Beyond: Twins and Siblings' File Users' Manual, User's Manual for Teacher Comment File, Friends File Users' Manual.

    Science.gov (United States)

    National Center for Education Statistics (ED), Washington, DC.

    These three users' manuals are for specific files of the High School and Beyond Study, a national longitudinal study of high school sophomores and seniors in 1980. The three files are computerized databases that are available on magnetic tape. As one component of base year data collection, information identifying twins, triplets, and some non-twin…

  13. Menggabungkan Beberapa File Dalam SPSS/PC

    Directory of Open Access Journals (Sweden)

    Syahrudji Naseh

    2012-09-01

    Full Text Available Pada dasamya piranti lunak komputer dapat dibagi ke dalam lima kelompok besar yaitu pengolah kata, spreadsheet database, statistika dan animasi/desktop. Masing-masing mempunyai kelebihan dan kekurangannya. Piranti lunak dBase 111+ yang merupakan piranti lunak paling populer dalam"database", hanya dapat menampung 128 variabel saja. Oleh karenanya pada suatu kuesioner yang besar seperti Susenas (Survei Sosial Ekonomi Nasional atau SKRT (Survei Kesehatan Rumah Tangga, datanya tidak dapat dijadikan satu "file". Biasanya dipecah menjadi banyak "file", umpamanya fileldbf, file2.dbf dan seterusnya.Masalahnya adalah bagaimana menggabung beberapa variabel yang ada di file1.dbf engan beberapa variabel yang ada di file5.dbf? Tulisan ini mencoba membahas masalah tersebut

  14. Machine-readable files developed for the High Plains Regional Aquifer-System analysis in parts of Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming

    Science.gov (United States)

    Ferrigno, C.F.

    1986-01-01

    Machine-readable files were developed for the High Plains Regional Aquifer-System Analysis project are stored on two magnetic tapes available from the U.S. Geological Survey. The first tape contains computer programs that were used to prepare, store, retrieve, organize, and preserve the areal interpretive data collected by the project staff. The second tape contains 134 data files that can be divided into five general classes: (1) Aquifer geometry data, (2) aquifer and water characteristics , (3) water levels, (4) climatological data, and (5) land use and water use data. (Author 's abstract)

  15. Radiological digital teaching file development: an overview

    International Nuclear Information System (INIS)

    Scarsbrook, A.F.; Foley, P.T.; Perriss, R.W.; Graham, R.N.J.

    2005-01-01

    Radiologists are collectors of interesting films for teaching purposes or for use in presentations and publications. Traditionally, hard copies of films have been stored in an organized fashion, usually in a filing cabinet or film library. This system has inherent limitations, such as the physical space required. Many of the shortcomings can be circumvented by development of an electronic teaching file. Whereas the implementation of an institutional radiological digital image database can require significant developmental effort and programming expertise, there are a number of web-based solutions which are freely available and can be relatively easily employed to establish a contemporary electronic image library. This article will review the various options and discuss the process of developing a digital image database

  16. Storage Manager and File Transfer Web Services

    International Nuclear Information System (INIS)

    William A Watson III; Ying Chen; Jie Chen; Walt Akers

    2002-01-01

    Web services are emerging as an interesting mechanism for a wide range of grid services, particularly those focused upon information services and control. When coupled with efficient data transfer services, they provide a powerful mechanism for building a flexible, open, extensible data grid for science applications. In this paper we present our prototype work on a Java Storage Resource Manager (JSRM) web service and a Java Reliable File Transfer (JRFT) web service. A java client (Grid File Manager) on top of JSRM and is developed to demonstrate the capabilities of these web services. The purpose of this work is to show the extent to which SOAP based web services are an appropriate direction for building a grid-wide data management system, and eventually grid-based portals

  17. Earnings Public-Use File, 2006

    Data.gov (United States)

    Social Security Administration — Social Security Administration released Earnings Public-Use File (EPUF) for 2006. File contains earnings information for individuals drawn from a systematic random...

  18. 12 CFR 509.10 - Filing of papers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Filing of papers. 509.10 Section 509.10 Banks... IN ADJUDICATORY PROCEEDINGS Uniform Rules of Practice and Procedure § 509.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding documents produced in response to a discovery request...

  19. Benchmark test of evaluated nuclear data files for fast reactor neutronics application

    International Nuclear Information System (INIS)

    Chiba, Go; Hazama, Taira; Iwai, Takehiko; Numata, Kazuyuki

    2007-07-01

    A benchmark test of the latest evaluated nuclear data files, JENDL-3.3, JEFF-3.1 and ENDF/B-VII.0, has been carried out for fast reactor neutronics application. For this benchmark test, experimental data obtained at fast critical assemblies and fast power reactors are utilized. In addition to comparing of numerical solutions with the experimental data, we have extracted several cross sections, in which differences between three nuclear data files affect significantly numerical solutions, by virtue of sensitivity analyses. This benchmark test concludes that ENDF/B-VII.0 predicts well the neutronics characteristics of fast neutron systems rather than the other nuclear data files. (author)

  20. TFTR data management system

    International Nuclear Information System (INIS)

    Randerson, L.; Chu, J.; Ludescher, C.; Malsbury, J.; Stark, W.

    1986-01-01

    Developments in the tokamak fusion test reactor (TFTR) data-management system supporting data acquisition and off-line physics data reduction are described. Data from monitor points, timing channels, transient recorder channels, and other devices are acquired and stored for use by on-line tasks. Files are transferred off line automatically. A configuration utility determines data acquired and files transferred. An event system driven by file arrival activates off-line reduction processes. A post-run process transfers files not shipped during runs. Files are archived to tape and are retrievable by digraph and shot number. Automatic skimming based on most recent access, file type, shot numbers, and user-set protections maintains the files required for post-run data reduction

  1. Cleaning Effectiveness of a Reciprocating Single-file and a Conventional Rotary Instrumentation System.

    Science.gov (United States)

    de Carvalho, Fredson Marcio Acris; Gonçalves, Leonardo Cantanhede de Oliveira; Marques, André Augusto Franco; Alves, Vanessa; Bueno, Carlos Eduardo da Silveira; De Martin, Alexandre Sigrist

    2016-01-01

    To compare cleaning effectiveness by histological analysis of a reciprocating single-file system with ProTaper rotary instruments during the preparation of curved root canals in extracted teeth. A total of 40 root canals with curvatures ranging between 20 - 40 degrees were divided into two groups of 20 canals. Canals were prepared to the following apical sizes: Reciproc size 25 (n=20); ProTaper: F2 (n=20). The normal distribution of data was tested by the Kolmogorov-Smirnov test and the values obtained for the test (Mann-Whitney U test, P .05) between the two groups. The application of reciprocating motion during instrumentation did not result in increased debris when compared with continuous rotation motion, even in the apical part of curved canals. Both instruments resulted in debris in the canal lumen, irrespective of the movement kinematics applied.

  2. Disc operational system

    International Nuclear Information System (INIS)

    Veretenov, V.Yu.; Volkov, A.I.; Gurevich, M.I.; Kozik, V.S.; Pod'yachev, E.I.; Shapiro, M.L.

    1974-01-01

    A disc operational system is proposed, which is based on the file structure and designed for use in a BESM-6 computer with the software system comprising a dispatcher DD-73 and a monitor 'Dubna'. The main distinguishing feature of the disc operational system is the decentralization of the file system. Each disc package is an independent file unaffected by the state of the other disc packages. The use of several disc packages is allowed. The above feature of the disc operational system makes it possible to simplify the language of communication with the system, to give the user the opportunity of controlling the file quite independently, and to simplify the maintenance of the discs by the computer personnel. One and the same disc can be simultaneously addressed by all problems in the processor (both mathematical and service). A single file, however, may be used in the recording mode by only one problem. The description presented is the instruction for users. It also describes special possibilities open to the system programmers [ru

  3. 12 CFR 263.10 - Filing of papers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Filing of papers. 263.10 Section 263.10 Banks... OF PRACTICE FOR HEARINGS Uniform Rules of Practice and Procedure § 263.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding documents produced in response to a discovery request...

  4. 12 CFR 308.10 - Filing of papers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Filing of papers. 308.10 Section 308.10 Banks... AND PROCEDURE Uniform Rules of Practice and Procedure § 308.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding documents produced in response to a discovery request pursuant to...

  5. 29 CFR 1981.103 - Filing of discrimination complaint.

    Science.gov (United States)

    2010-07-01

    ... constitute the violations. (c) Place of filing. The complaint should be filed with the OSHA Area Director... or she has been discriminated against by an employer in violation of the Act may file, or have filed..., but may be filed with any OSHA officer or employee. Addresses and telephone numbers for these...

  6. 77 FR 66458 - Combined Notice of Filings #1

    Science.gov (United States)

    2012-11-05

    ... Service Company of Colorado. Description: 2012--10--26 PSCo MBR Filing to be effective 12/26/ 2012. Filed...--SPS MBR Filing to be effective 12/26/2012. Filed Date: 10/26/12. Accession Number: 20121026-5123...: Revised Application for MBR Authorization to be effective 10/16/2012. Filed Date: 10/25/12. Accession...

  7. 75 FR 66075 - Combined Notice of Filings #1

    Science.gov (United States)

    2010-10-27

    ....12: Baseline MBR Concurrence to be effective 10/8/2010. Filed Date: 10/19/2010. Accession Number... Company submits tariff filing per 35.12: Baseline MBR Concurrence to be effective 10/8/2010. Filed Date... Power Company submits tariff filing per 35.12: Baseline MBR Concurrence to be effective 10/8/2010. Filed...

  8. Automated four-dimensional Monte Carlo workflow using log files and real-time motion monitoring

    DEFF Research Database (Denmark)

    Sibolt, Patrik; Cronholm, R.O.; Heath, E.

    2017-01-01

    been developed in python. The workflow has been tested and verified using an in-house developed dosimetry system comprised of a dynamic thorax phantom constructed for plastic scintillator dosimetry. The workflow is directly compatible with any treatment planning system and can also be triggered...... by the appearance of linac log files. It has minimum user interaction and, with the use of linac log files, it provides a method for verification of the actually delivered dose in the patient geometry....

  9. Influence of File Motion on Shaping, Apical Debris Extrusion and Dentinal Defects: A Critical Review.

    Science.gov (United States)

    Pedrinha, Victor Feliz; Brandão, Juliana Melo da Silva; Pessoa, Oscar Faciola; Rodrigues, Patrícia de Almeida

    2018-01-01

    Advances in endodontics have enabled the evolution of file manufacturing processes, improving performance beyond that of conventional files. In the present study, systems manufactured using state of the art methods and possessing special properties related to NiTi alloys ( i.e ., CM-Wire, M-Wire and R-Phase) were selected. The aim of this review was to provide a detailed analysis of the literature about the relationship between recently introduced NiTi files with different movement kinematics and shaping ability, apical extrusion of debris and dentin defects in root canal preparations. From March 2016 to January 2017, electronic searches were conducted in the PubMed and SCOPUS databases for articles published since January 2010. In vitro studies performed on extracted human teeth and published in English were considered for this review. Based on the inclusion criteria, 71 papers were selected for the analysis of full-text copies. Specific analysis was performed on 45 articles describing the effects of reciprocating, continuous and adaptive movements on the WaveOne Gold, Reciproc, HyFlex CM and Twisted File Adaptive systems. A wide range of testing conditions and methodologies have been used to compare the systems. Due the controversies among the results, the characteristics of the files used, such as their design and alloys, appear to be inconsistent to determine the best approach.

  10. 12 CFR 19.10 - Filing of papers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Filing of papers. 19.10 Section 19.10 Banks and... Rules of Practice and Procedure § 19.10 Filing of papers. (a) Filing. Any papers required to be filed...) Delivering the papers to a reliable commercial courier service, overnight delivery service, or to the U.S...

  11. 12 CFR 747.10 - Filing of papers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Filing of papers. 747.10 Section 747.10 Banks... Practice and Procedure § 747.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding...) Delivering the papers to a reliable commercial courier service, overnight delivery service, or to the U.S...

  12. The computerized OMAHA system in microsoft office excel.

    Science.gov (United States)

    Lai, Xiaobin; Wong, Frances K Y; Zhang, Peiqiang; Leung, Carenx W Y; Lee, Lai H; Wong, Jessica S Y; Lo, Yim F; Ching, Shirley S Y

    2014-01-01

    The OMAHA System was adopted as the documentation system in an interventional study. To systematically record client care and facilitate data analysis, two Office Excel files were developed. The first Excel file (File A) was designed to record problems, care procedure, and outcomes for individual clients according to the OMAHA System. It was used by the intervention nurses in the study. The second Excel file (File B) was the summary of all clients that had been automatically extracted from File A. Data in File B can be analyzed directly in Excel or imported in PASW for further analysis. Both files have four parts to record basic information and the three parts of the OMAHA System. The computerized OMAHA System simplified the documentation procedure and facilitated the management and analysis of data.

  13. Empowering file-based radio production through media asset management systems

    Science.gov (United States)

    Muylaert, Bjorn; Beckers, Tom

    2006-10-01

    In recent years, IT-based production and archiving of media has matured to a level which enables broadcasters to switch over from tape- or CD-based to file-based workflows for the production of their radio and television programs. This technology is essential for the future of broadcasters as it provides the flexibility and speed of execution the customer demands by enabling, among others, concurrent access and production, faster than real-time ingest, edit during ingest, centrally managed annotation and quality preservation of media. In terms of automation of program production, the radio department is the most advanced within the VRT, the Flemish broadcaster. Since a couple of years ago, the radio department has been working with digital equipment and producing its programs mainly on standard IT equipment. Historically, the shift from analogue to digital based production has been a step by step process initiated and coordinated by each radio station separately, resulting in a multitude of tools and metadata collections, some of them developed in-house, lacking integration. To make matters worse, each of those stations adopted a slightly different production methodology. The planned introduction of a company-wide Media Asset Management System allows a coordinated overhaul to a unified production architecture. Benefits include the centralized ingest and annotation of audio material and the uniform, integrated (in terms of IT infrastructure) workflow model. Needless to say, the ingest strategy, metadata management and integration with radio production systems play a major role in the level of success of any improvement effort. This paper presents a data model for audio-specific concepts relevant to radio production. It includes an investigation of ingest techniques and strategies. Cooperation with external, professional production tools is demonstrated through a use-case scenario: the integration of an existing, multi-track editing tool with a commercially available

  14. 76 FR 58257 - Combined Notice of Filings #2

    Science.gov (United States)

    2011-09-20

    ... Hills Wind Farm, LLC MBR Tariff to be effective 10/31/2007. Filed Date: 09/12/2011. Accession Number... filing per 35.1: Smoky Hills Wind Project II, LLC MBR Tariff to be effective 10/20/2008. Filed Date: 09..., LLC submits tariff filing per 35.1: Enel Stillwater, LLC MBR Tariff to be effective 12/5/2008. Filed...

  15. 77 FR 28592 - Combined Notice of Filings #1

    Science.gov (United States)

    2012-05-15

    ...: Middletown MBR Application to be effective 5/8/2012. Filed Date: 5/7/12. Accession Number: 20120507-5128..., LLC. Description: Southern Energy Initial MBR Filing to be effective 5/ 7/2012. Filed Date: 5/8/12... Company submits tariff filing per 35.37: MBR Triennial Filing--1st Rev MBR to be effective 9/30/2010...

  16. 76 FR 59676 - Combined Notice of Filings #1

    Science.gov (United States)

    2011-09-27

    ... MBR Tariff to be effective 10/1/2011. Filed Date: 09/16/2011. Accession Number: 20110916-5146. Comment... 35.1: ONEOK Energy Services Company Baseline MBR Filing to be effective 9/16/2011. Filed Date: 09/16... Services Order No. 697 Compliance Filing of MBR Tariff to be effective 9/16/2011. Filed Date: 09/16/2011...

  17. K-file vs ProFiles in cleaning capacity and instrumentation time in primary molar root canals: An in vitro study

    Directory of Open Access Journals (Sweden)

    N Madan

    2011-01-01

    Full Text Available Objectives: This study compares the efficiency of manual K-files and rotary ProFiles in cleaning capacity and instrumentation time in primary molar root canals. Materials and Methods: Seventy-five maxillary and mandibular primary molar root canals were instrumented with ProFiles and K-files in the step-back manner from size #10 to #40. The teeth were decalcified, dehydrated and cleared, and analyzed for the presence of dye remaining on the root canal walls, which served as an evidence of cleaning capacity of both the techniques. Results: The results showed a significant difference in the cleaning capacity of the root canals with ProFiles and K-files, in apical and coronal thirds of the root canal. ProFiles have been found to be more efficient in cleaning the coronal thirds and K-files in cleaning apical thirds of the root canals. Both the techniques were almost equally effective in cleaning the middle thirds of the canals. The time taken during the cleaning of the root canals appeared to be statistically shorter with K-files than profiles.

  18. 41 CFR 101-26.308 - Obtaining filing cabinets.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Obtaining filing cabinets. 101-26.308 Section 101-26.308 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 26-PROCUREMENT SOURCES AND...

  19. 77 FR 1064 - Combined Notice of Filings #1

    Science.gov (United States)

    2012-01-09

    ... confirm timely development of new interface pricing software of New York Independent System Operator, Inc... Market Power Analysis of Northern Indiana Public Service Company. Filed Date: 12/28/11. Accession Number..., Duke Energy Indiana, Inc., St. Paul Cogeneration, LLC. Description: Updated market power analysis of...

  20. A GridFTP transport driver for Globus XIO

    International Nuclear Information System (INIS)

    Kettimuthu, R.; Wantao, L.; Link, J.; Bresnahan, J.

    2008-01-01

    GridFTP is a high-performance, reliable data transfer protocol optimized for high-bandwidth wide-area networks. Based on the Internet FTP protocol, it defines extensions for high-performance operation and security. The Globus implementation of GridFTP provides a modular and extensible data transfer system architecture suitable for wide area and high-performance environments. GridFTP is the de facto standard in projects requiring secure, robust, high-speed bulk data transport. For example, the high energy physics community is basing its entire tiered data movement infrastructure for the Large Hadron Collider computing Grid on GridFTP; the Laser Interferometer Gravitational Wave Observatory routinely uses GridFTP to move 1 TB a day during production runs; and GridFTP is the recommended data transfer mechanism to maximize data transfer rates on the TeraGrid. Commonly used GridFTP clients include globus-url-copy, uberftp, and the Globus Reliable File Transfer service. In this paper, we present a Globus XIO based client to GridFTP that provides a simple Open/Close/Read/Write (OCRW) interface to the users. Such a client greatly eases the addition of GridFTP support to third-party programs, such as SRB and MPICH-G2. Further, this client provides an easier and familiar interface for applications to efficiently access remote files. We compare the performance of this client with that of globus-url-copy on multiple endpoints in the TeraGrid infrastructure. We perform both memory-to-memory and disk-to-disk transfers and show that the performance of this OCRW client is comparable to that of globus-url-copy. We also show that our GridFTP client significantly outperforms the GPFS WAN on the TeraGrid.