[99mTc]O2-AMD3100 as a SPECT tracer for CXCR4 receptor imaging

International Nuclear Information System (INIS)

Hartimath, Siddesh V.; Domanska, Urszula M.; Walenkamp, Annemiek M.E.; Dierckx, Rudi A.J.O.; Vries, Erik F.J. de

2013-01-01

Purpose: CXCR4 plays an important role in HIV infection, tumor progression, neurogenesis, and inflammation. In-vivo imaging of CXCR4 could provide more insight in the role of this receptor in health and disease. The aim of this study was to investigate [ 99m Tc]O 2 -AMD3100 as a potential SPECT tracer for imaging of CXCR4. Method: AMD3100 was labelled with [ 99m Tc]pertechnetate. A cysteine challenge assay was performed to test the tracer stability. Heterologous and homologous receptor binding assay and internalization assay were performed in CXCR4 expressing Jurkat-T cells. Ex vivo biodistribution was studied in healthy mice at 30, 60, and 120 min after tracer injection. Tumor uptake of the tracer was determined by microSPECT imaging in nude mice xenografted with human PC-3 prostate tumor. Specificity of tracer uptake was determined by blocking studies using an excess of unlabelled AMD3100. Results: AMD3100 was labelled with technetium-99 m with a radiochemical yield of > 98%. The tracer was stable in PBS and mouse plasma for at least 6 h at 37 °C. Heterologous and homologous binding assays with AMD3100 showed IC 50 values of 240 ± 10 μM, and 92 ± 5 μM for [ 125 I]SDF-1α and [ 99m Tc]O 2 -AMD3100 respectively, with negligible receptor internalisation. The tracer showed high uptake in liver, lungs, spleen, thymus, intestine and bone. Blocking dose of AMD3100.8HCl (20 mg/kg) decreased the uptake in these organs (p 99m Tc]O 2 -AMD3100 showed specific tumor accumulation in mice bearing PC-3 xenografts model. Time activity curves (TAC) in AMD3100 pre-treated animals tracer showed 1.7 times less tumor uptake as compared to control animals (p 99m Tc]O 2 -AMD3100 is readily labelled, is stable in plasma and displays a favourable binding affinity for the CXCR4 receptors. [ 99m Tc O 2 -AMD3100 shows specific binding in organs with high CXCR4 expression and in CXCR4 positive tumors. These results justify further evaluation of this radiopharmaceutical as a potential

Temperature Histories of Structural Steel Laser and Hybrid Laser-GMA Welds Calculated Using Multiple Constraints

Science.gov (United States)

2015-12-10

Laboratory (Ret.), private communication. 33. S. Kou, Welding Metallurgy , 2nd Ed., John Wiley & Sons, Inc., 2003. DOI: 10.1002/0471434027. 34. J. K...Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/6390--15-9665 Temperature Histories of Structural Steel Laser and Hybrid Laser-GMA Welds ...NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Temperature Histories of Structural Steel Laser and Hybrid Laser-GMA Welds Calculated Using Multiple

21 CFR 886.3100 - Ophthalmic tantalum clip.

Science.gov (United States)

2010-04-01

... blood vessels in the eye. (b) Classification. Class II (special controls). The device is exempt from the...) MEDICAL DEVICES OPHTHALMIC DEVICES Prosthetic Devices § 886.3100 Ophthalmic tantalum clip. (a) Identification. An ophthalmic tantalum clip is a malleable metallic device intended to be implanted permanently...

Studies on preparing and adsorption property of grafting terpolymer microbeads of PEI-GMA/AM/MBA for bilirubin.

Science.gov (United States)

Gao, Baojiao; Lei, Haibo; Jiang, Liding; Zhu, Yong

2007-06-15

Crosslinking copolymer microbeads with a diameter range of 100-150 microm were synthesized by suspension copolymerization of glycidyl methacrylate (GMA), acrylamide (AM) and N,N'-methylene bisacrylamide (MBA). Subsequently, polyethyleneimine (PEI) was grafted on the surfaces of the terpolymer microbeads GMA/AM/MBA via the ring-opening reaction of the epoxy groups, and the grafting microbeads PEI-GMA/AM/MBA were prepared. In this paper, the adsorption property of the grafting microbeads for bilirubin was mainly investigated, and the effects of various factors, such as pH value, ionic strength and grafting degree of PEI on the surface of grafting microbeads and the adsorption capacity of the grafting microbeads for bilirubin were examined. The batch adsorption experiment results show that by right of the action of grafted polyamine macromolecules PEI, the grafting microbeads PEI-GMA/AM/MBA have quite strong adsorption ability for bilirubin; the isotherm adsorption conforms to Freundlich equation. The pH value of the medium affects the adsorption capacity greatly, As in the nearly neutral solutions with pH 6, the grafting microbeads have the strongest adsorption ability for bilirubin, whereas in acidic and basic solutions their adsorption ability is weak. The ionic strength hardly affects the adsorption ability of the grafting microbeads. The grafting degree of PEI on the surfaces of the grafting microbeads also has a great effect on the adsorption capacity, and higher the grafting degree of PEI on the surface of the microbead PEI-GMA/AM/MBA, the stronger is the adsorption ability of the microbeads.

Die Zukunft der ärztlichen Weiterbildung in Deutschland – Positionspapier des Ausschusses Weiterbildung der Gesellschaft für Medizinische Ausbildung (GMA [The future of graduate medical education in Germany – Position paper of the committee on graduate medical education of the Society for Medical Education (GMA

Directory of Open Access Journals (Sweden)

Weih, Markus

2013-05-01

Full Text Available [english] The German graduate medical education system is going through an important phase of changes. Besides the ongoing reform of the national guidelines for graduate medical education (Musterweiterbildungsordnung, other factors like societal and demographic changes, health and research policy reforms also play a central role for the future and competitiveness of graduate medical education.With this position paper, the committee on graduate medical education of the Society for Medical Education (GMA would like to point out some central questions for this process and support the current discourse.As an interprofessional and interdisciplinary scientific society, the GMA has the resources to contribute in a meaningful way to an evidence-based and future-oriented graduate medical education strategy.In this position paper, we use four key questions with regards to educational goals, quality assurance, teaching competence and policy requirements to address the core issues for the future of graduate medical education in Germany. The GMA sees its task in contributing to the necessary reform processes as the only German speaking scientific society in the field of medical education.[german] Die ärztliche Weiterbildung in Deutschland befindet sich im Umbruch. Neben der aktuellen Reform der Musterweiterbildungsordnung spielen gesellschaftliche, demographische, gesundheits- und forschungspolitische Faktoren eine wichtige Rolle für die Zukunft und Konkurrenzfähigkeit der ärztlichen Weiterbildung.Der Ausschuss für Weiterbildung der Gesellschaft für Medizinische Ausbildung (GMA möchte mit diesem Positionspapier auf zentrale Fragen in diesem Prozess aufmerksam machen und Impulse für den aktuellen Diskurs geben.Dabei kann die GMA als interdisziplinäre und interprofessionelle Fachgesellschaft wichtige Beiträge zu einer evidenzbasierten und zukunftsorientierten Weiterbildungsstrategie liefern.Im vorliegenden Papier werden anhand von vier Leitfragen zu

Structure and properties of GMA surfaced armour plates

OpenAIRE

A. Klimpel; K. Luksa; M. Burda

2010-01-01

Purpose: In the combat vehicles many materials can be used for the armour. Application of the monolithic armour plates in light combat vehicles is limited by the high armour weigh. Introduction of the layered armour plates is a way to limit the vehicle weight. In the paper test results of graded and nanostructural GMA surfaced armour plates are presented.Design/methodology/approach: Metallographic structure, chemical composition and hardness of surfaced layers were investigated in order to ex...

40 CFR 721.3100 - Oligomeric silicic acid ester compound with a hy-droxyl-al-kyla-mine.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Oligomeric silicic acid ester compound with a hy-droxyl-al-kyla-mine. 721.3100 Section 721.3100 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.3100 Oligomeric silicic acid ester compound with a...

How could the topic patient safety be embedded in the curriculum? A recommendation by the Committee for Patient Safety and Error Management of the GMA.

Science.gov (United States)

Kiesewetter, Jan; Drossard, Sabine; Gaupp, Rainer; Baschnegger, Heiko; Kiesewetter, Isabel; Hoffmann, Susanne

2018-01-01

The topic of patient safety is of fundamental interest for the health care sector. In view of the realisation of the National Competence-Based Learning Objectives Catalogue for Undergraduate Medical Education (NKLM) this topic now has to be prepared for medical education. For a disciplinary and content-related orientation the GMA Committee developed the Learning Objectives Catalogue Patient Safety for Undergraduate Medical Education (GMA-LZK). To ensure an optimal implementation of the GMA-LZK we recommend a longitudinal embedding into the existing curriculum. This position paper supports the implementation of the GMA-LZK and is aimed at everyone who wants to establish teaching courses on the topic patient safety and embed them in the curriculum. In light of this, we will initially describe the key features for a structured analysis of the current situation. Based on three best-practice-examples, as seen in the faculties of Freiburg, Bonn and Munich, different approaches to the implementation of the GMA-LZK will be illustrated. Lastly, we will outline the methodical requirements regarding the curriculum development as well as the disciplinary and methodical competences that the lecturers will have to hold or develop to fulfil the requirements.

Destructive Testing of an ES-3100 Shipping Container at the Savannah River National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Loftin, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Abramczyk, G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-06-09

Destructive testing of an ES-3100 Shipping Container was completed by the Packaging Technology and Pressurized Systems organization within the Savannah River National Laboratory in order to qualify the ES-3100 as a candidate storage and transport package for applications at various facilities at the Savannah River Site. The testing consisted of the detonation of three explosive charges at separate locations on a single ES-3100. The locations for the placement were chosen based the design of the ES-3100 as well as the most likely places for the package to incur damage as a result of the detonation. The testing was completed at an offsite location, which raised challenges as well as allowed for development of new partnerships for this testing and for potential future testing. The results of the testing, the methods used to complete the testing, and similar, potential future work will be discussed.

Test and intercomparisons of data fitting with general least squares code GMA versus Bayesian code GLUCS

International Nuclear Information System (INIS)

Pronyaev, V.G.

2003-01-01

Data fitting with GMA and GLUCS gives consistent results. Difference in the evaluated central values obtained with different formalisms can be related to the general accuracy with which fits could be done in different formalisms. It has stochastic nature and should be accounted in the final results of the data evaluation as small SERC uncertainty. Some shift in central values of data evaluated with GLUCS and GMA relative the central values evaluated with the R-matrix model code RAC is observed for cases of fitting strongly varying data and is related to the PPP. The procedure of evaluation, free from PPP, should be elaborated. (author)

In vitro blood and fibroblast responses to BisGMA-TEGDMA/bioactive glass composite implants.

Science.gov (United States)

Abdulmajeed, Aous A; Kokkari, Anne K; Käpylä, Jarmo; Massera, Jonathan; Hupa, Leena; Vallittu, Pekka K; Närhi, Timo O

2014-01-01

This in vitro study was designed to evaluate both blood and human gingival fibroblast responses to bisphenol A-glycidyl methacrylate-triethyleneglycol dimethacrylate (BisGMA-TEGDMA)/bioactive glass (BAG) composite, aimed to be used as composite implant abutment surface modifier. Three different types of substrates were investigated: (a) plain polymer (BisGMA 50 wt%-TEGDMA 50 wt%), (b) BAG-composite (50 wt% polymer + 50 wt% fraction of BAG-particles, <50 μm), and (c) plain BAG plates (100 wt% BAG). The blood response, including the blood-clotting ability and platelet adhesion morphology were evaluated. Human gingival fibroblasts were plated and cultured on the experimental substrates for up to 10 days, then the cell proliferation rate was assessed using AlamarBlue assay™. The BAG-composite and plain BAG substrates had a shorter clotting time than plain polymer substrates. Platelet activation and aggregation were most extensive, qualitatively, on BAG-composite. Analysis of the normalized cell proliferation rate on the different surfaces showed some variations throughout the experiment, however, by day 10 the BAG-composite substrate showed the highest (P < 0.001) cell proliferation rate. In conclusion, the presence of exposed BAG-particles enhances fibroblast and blood responses on composite surfaces in vitro.

The differences of saliva pH before and after application of Bis-GMA resin based-pit and fissure sealant

Directory of Open Access Journals (Sweden)

Ayub Irmadani Anwar

2016-06-01

Full Text Available Pit and fissure sealant applications is one way to prevent caries. One of the effective ingredient as a pit and fissure sealant is a Bis-GMA resin. One of the active components  of  Bis-GMA  resin  is  sodium  fluoride,  which is capable  of releasing fluoride ions to the tooth surface and able to improve the repair and remineralization process through the replacement  of  calcium and phosphate ions found in saliva to increase the pH of saliva. This study was to determine the effect of pit and fissure sealant applications made from Bis-GMA resin to pH of saliva in children aged 6-12 years. The study design is pre and post test with control group design. Saliva samples were derived from 15 pediatric patients has met the criteria. The pH of saliva were taken before and after the application of pit and fissure sealant made from Bis-GMA and measured with pH meter. This study used a non-parametric test, the Wilcoxon Signed Rank test. The results of this study are also supported by the results of statistical tests showed p-: 0.005 (p<0.05 value, which means that there are significant differences in pH of saliva before and after the application of pit and fissure sealant made from Bis-GMA resin.

Molecular mechanism of AMD3100 antagonism in the CXCR4 receptor: transfer of binding site to the CXCR3 receptor

DEFF Research Database (Denmark)

Rosenkilde, Mette M; Gerlach, Lars-Ole; Jakobsen, Janus S

2004-01-01

, respectively. Metal ion binding in the cyclam rings of AMD3100 increased its dependence on Asp(262) and provided a tighter molecular map of the binding site, where borderline mutational hits became clear hits for the Zn(II)-loaded analog. The proposed binding site for AMD3100 was confirmed by a gradual build......-up in the rather distinct CXCR3 receptor, for which the compound normally had no effect. Introduction of only a Glu at position VII:06 and the removal of a neutralizing Lys residue at position VII:02 resulted in a 1000-fold increase in affinity of AMD3100 to within 10-fold of its affinity in CXCR4. We conclude...

Comparative Study of Structure-Property Relationships in Polymer Networks Based on Bis-GMA, TEGDMA and Various Urethane-Dimethacrylates

Directory of Open Access Journals (Sweden)

Izabela Barszczewska-Rybarek

2015-03-01

Full Text Available The effect of various dimethacrylates on the structure and properties of homo- and copolymer networks was studied. The 2,2-bis-[4-(2-hydroxy-3- methacryloyloxypropoxyphenyl]-propane (Bis-GMA, triethylene glycol dimethacrylate (TEGDMA and 1,6-bis-(methacryloyloxy-2-ethoxycarbonylamino-2,4,4-trimethylhexane (HEMA/TMDI, all popular in dentistry, as well as five urethane-dimethacrylate (UDMA alternatives of HEMA/TMDI were used as monomers. UDMAs were obtained from mono-, di- and tri(ethylene glycol monomethacrylates and various commercial diisocyanates. The chemical structure, degree of conversion (DC and scanning electron microscopy (SEM fracture morphology were related to the mechanical properties of the polymers: flexural strength and modulus, hardness, as well as impact strength. Impact resistance was widely discussed, being lower than expected in the case of poly(UDMAs. It was caused by the heterogeneous morphology of these polymers and only moderate strength of hydrogen bonds between urethane groups, which was not high enough to withstand high impact energy. Bis-GMA, despite having the highest polymer morphological heterogeneity, ensured fair impact resistance, due to having the strongest hydrogen bonds between hydroxyl groups. The TEGDMA homopolymer, despite being heterogeneous, produced the smoothest morphology, which resulted in the lowest brittleness. The UDMA monomer, having diethylene glycol monomethacrylate wings and the isophorone core, could be the most suitable HEMA/TMDI alternative. Its copolymer with Bis-GMA and TEGDMA had improved DC as well as all the mechanical properties.

The future of graduate medical education in Germany - position paper of the Committee on Graduate Medical Education of the Society for Medical Education (GMA).

Science.gov (United States)

David, Dagmar M; Euteneier, Alexander; Fischer, Martin R; Hahn, Eckhart G; Johannink, Jonas; Kulike, Katharina; Lauch, Robert; Lindhorst, Elmar; Noll-Hussong, Michael; Pinilla, Severin; Weih, Markus; Wennekes, Vanessa

2013-01-01

The German graduate medical education system is going through an important phase of changes. Besides the ongoing reform of the national guidelines for graduate medical education (Musterweiterbildungsordnung), other factors like societal and demographic changes, health and research policy reforms also play a central role for the future and competitiveness of graduate medical education. With this position paper, the committee on graduate medical education of the Society for Medical Education (GMA) would like to point out some central questions for this process and support the current discourse. As an interprofessional and interdisciplinary scientific society, the GMA has the resources to contribute in a meaningful way to an evidence-based and future-oriented graduate medical education strategy. In this position paper, we use four key questions with regards to educational goals, quality assurance, teaching competence and policy requirements to address the core issues for the future of graduate medical education in Germany. The GMA sees its task in contributing to the necessary reform processes as the only German speaking scientific society in the field of medical education.

Electromodulation spectroscopy of direct optical transitions in Ge{sub 1−x}Sn{sub x} layers under hydrostatic pressure and built-in strain

Energy Technology Data Exchange (ETDEWEB)

Dybała, F.; Żelazna, K.; Maczko, H.; Gladysiewicz, M.; Misiewicz, J.; Kudrawiec, R., E-mail: robert.kudrawiec@pwr.wroc.pl [Faculty of Fundamental Problems of Technology, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wrocław (Poland); Lin, H.; Chen, R.; Shang, C.; Huo, Y.; Kamins, T. I.; Harris, J. S. [Solid State and Photonics Laboratory, Stanford University, Stanford, California 94305-4075 (United States)

2016-06-07

Unstrained Ge{sub 1−x}Sn{sub x} layers of various Sn concentration (1.5%, 3%, 6% Sn) and Ge{sub 0.97}Sn{sub 0.03} layers with built-in compressive (ε = −0.5%) and tensile (ε = 0.3%) strain are grown by molecular beam epitaxy and studied by electromodulation spectroscopy (i.e., contactless electroreflectance and photoreflectance (PR)). In order to obtain unstrained GeSn layers and layers with different built-in in-plane strains, virtual InGaAs substrates of different compositions are grown prior to the deposition of GeSn layers. For unstrained Ge{sub 1−x}Sn{sub x} layers, the pressure coefficient for the direct band gap transition is determined from PR measurements at various hydrostatic pressures to be 12.2 ± 0.2 meV/kbar, which is very close to the pressure coefficient for the direct band gap transition in Ge (12.9 meV/kbar). This suggests that the hydrostatic deformation potentials typical of Ge can be applied to describe the pressure-induced changes in the electronic band structure of Ge{sub 1−x}Sn{sub x} alloys with low Sn concentrations. The same conclusion is derived for the uniaxial deformation potential, which describes the splitting between heavy-hole (HH) and light-hole (LH) bands as well as the strain-related shift of the spin-orbit (SO) split-off band. It is observed that the HH, LH, and SO related transitions shift due to compressive and tensile strain according to the Bir-Pikus theory. The dispersions of HH, LH, and SO bands are calculated for compressive and tensile strained Ge{sub 0.97}Sn{sub 0.03} with the 8-band kp Hamiltonian including strain effects, and the mixing of HH and LH bands is discussed. In addition, the dispersion of the electronic band structure is calculated for unstrained Ge{sub 1−x}Sn{sub x} layers (3% and 6% Sn) at high hydrostatic pressure with the 8-band kp Hamiltonian, and the pressure-induced changes in the electronic band structure are discussed.

MicroRNA-146a and AMD3100, two ways to control CXCR4 expression in acute myeloid leukemias

Energy Technology Data Exchange (ETDEWEB)

Spinello, I; Quaranta, M T; Riccioni, R; Riti, V; Pasquini, L; Boe, A; Pelosi, E [Department of Hematology, Oncology and Molecular Medicine, Istituto Superiore di Sanità, Rome (Italy); Vitale, A; Foà, R [Department of Cellular Biotechnologies and Hematology, Division of Hematology, ‘Sapienza' University, Rome (Italy); Testa, U; Labbaye, C [Department of Hematology, Oncology and Molecular Medicine, Istituto Superiore di Sanità, Rome (Italy)

2011-06-01

CXCR4 is a negative prognostic marker in acute myeloid leukemias (AMLs). Therefore, it is necessary to develop novel ways to inhibit CXCR4 expression in leukemia. AMD3100 is an inhibitor of CXCR4 currently used to mobilize cancer cells. CXCR4 is a target of microRNA (miR)-146a that may represent a new tool to inhibit CXCR4 expression. We then investigated CXCR4 regulation by miR-146a in primary AMLs and found an inverse correlation between miR-146a and CXCR4 protein expression levels in all AML subtypes. As the lowest miR-146a expression levels were observed in M5 AML, we analyzed the control of CXCR4 expression by miR-146a in normal and leukemic monocytic cells and showed that the regulatory miR-146a/CXCR4 pathway operates during monocytopoiesis, but is deregulated in AMLs. AMD3100 treatment and miR-146a overexpression were used to inhibit CXCR4 in leukemic cells. AMD3100 treatment induces the decrease of CXCR4 protein expression, associated with miR-146a increase, and increases sensitivity of leukemic blast cells to cytotoxic drugs, this effect being further enhanced by miR-146a overexpression. Altogether our data indicate that miR-146a and AMD3100, acting through different mechanism, downmodulate CXCR4 protein levels, impair leukemic cell proliferation and then may be used in combination with anti-leukemia drugs, for development of new therapeutic strategies.

MicroRNA-146a and AMD3100, two ways to control CXCR4 expression in acute myeloid leukemias

International Nuclear Information System (INIS)

Spinello, I; Quaranta, M T; Riccioni, R; Riti, V; Pasquini, L; Boe, A; Pelosi, E; Vitale, A; Foà, R; Testa, U; Labbaye, C

2011-01-01

CXCR4 is a negative prognostic marker in acute myeloid leukemias (AMLs). Therefore, it is necessary to develop novel ways to inhibit CXCR4 expression in leukemia. AMD3100 is an inhibitor of CXCR4 currently used to mobilize cancer cells. CXCR4 is a target of microRNA (miR)-146a that may represent a new tool to inhibit CXCR4 expression. We then investigated CXCR4 regulation by miR-146a in primary AMLs and found an inverse correlation between miR-146a and CXCR4 protein expression levels in all AML subtypes. As the lowest miR-146a expression levels were observed in M5 AML, we analyzed the control of CXCR4 expression by miR-146a in normal and leukemic monocytic cells and showed that the regulatory miR-146a/CXCR4 pathway operates during monocytopoiesis, but is deregulated in AMLs. AMD3100 treatment and miR-146a overexpression were used to inhibit CXCR4 in leukemic cells. AMD3100 treatment induces the decrease of CXCR4 protein expression, associated with miR-146a increase, and increases sensitivity of leukemic blast cells to cytotoxic drugs, this effect being further enhanced by miR-146a overexpression. Altogether our data indicate that miR-146a and AMD3100, acting through different mechanism, downmodulate CXCR4 protein levels, impair leukemic cell proliferation and then may be used in combination with anti-leukemia drugs, for development of new therapeutic strategies

BisGMA/TEGDMA dental nanocomposites containing glyoxylic acid modified high-aspect ratio hydroxyapatite nanofibers with enhanced dispersion

Science.gov (United States)

Chen, Liang; Xu, Changqi; Wang, Yong; Shi, Jian; Yu, Qingsong

2012-01-01

The purpose of this research was to investigate the influence of the glyoxylic acid (GA) modification of hydroxyapatite (HAP) nanofibers on their dispersion in bisphenol A glycidyl methacrylate (BisGMA)/triethylene glycol dimethacrylate (TEGDMA) dental composites and also investigate the mechanical properties, water absorption, and water solubility of the resulting dental resins and composites. Scanning/Transmission electron microscopy (STEM) images showed that microsized HAP nanofiber bundles could be effectively broken down to individual HAP nanofibers with an average length of ~15 μm after the surface modification process. Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA) characterization confirmed glyoxylic acid was chemically grafted on the HAP nanofiber surface, hypothetically by reacting with the amine group on HAP nanofiber surface. The enhanced dispersion of HAP nanofibers in dental matrix led to increased biaxial flexural strength (BFS) compared with the corresponding dental resins and composites filled with untreated HAP nanofibers. In addition, impregnation of small mass fractions of the glyoxylic acid modified HAP nanofibers into the BisGMA/TEGDMA dental resins (5wt%, 10wt%) or composites (2wt%, 3wt%) could also substantially improve the BFS in comparison with the controls(pure resins or dental composites filled with silica particles alone). Larger mass fractions could not further increase the mechanical property or even degrade the BFS values. Water behavior testing results indicated that the addition of glyoxylic acid modified HAP nanofibers resulted in higher water absorption and water solubility values which is not preferred for clinical application. In summary, well dispersed HAP nanofibers and their dental composites with enhanced mechanical property have been successfully fabricated but the water absorption and water solubility of such dental composites need to be

BisGMA/TEGDMA dental nanocomposites containing glyoxylic acid-modified high-aspect ratio hydroxyapatite nanofibers with enhanced dispersion

International Nuclear Information System (INIS)

Chen Liang; Yu Qingsong; Li Hao; Xu Changqi; Wang Yong; Shi Jian

2012-01-01

The purpose of this research was to investigate the influence of the glyoxylic acid (GA) modification of hydroxyapatite (HAP) nanofibers on their dispersion in bisphenol A glycidyl methacrylate (BisGMA)/triethylene glycol dimethacrylate (TEGDMA) dental composites and also to investigate the mechanical properties, water absorption and water solubility of the resulting dental resins and composites. Scanning/transmission electron microscopy images showed that microsized HAP nanofiber bundles could be effectively broken down into individual HAP nanofibers with an average length of ∼15 µm after the surface modification process. Fourier transform infrared spectroscopy, x-ray photoelectron spectroscopy and thermal gravimetric analysis characterization confirmed that GA was chemically grafted on the HAP nanofiber surface, hypothetically by reacting with the amine group on the HAP nanofiber surface. The enhanced dispersion of HAP nanofibers in the dental matrix led to increased biaxial flexural strength (BFS) compared with the corresponding dental resins and composites filled with untreated HAP nanofibers. In addition, impregnation of small mass fractions of the GA-modified HAP nanofibers into the BisGMA/TEGDMA dental resins (5 wt%, 10 wt%) or composites (2 wt%, 3 wt%) could also substantially improve the BFS in comparison with the controls (pure resins or dental composites filled with silica particles alone). Larger mass fractions could not increase the mechanical property further or even degraded the BFS values. Water behavior testing results indicated that the addition of the GA-modified HAP nanofibers resulted in higher water absorption and water solubility values, which are not preferred for clinical application. In summary, well-dispersed HAP nanofibers and their dental composites with enhanced mechanical properties have been successfully fabricated, but the water absorption and water solubility of such dental composites need to be further improved. (paper)

Scalability tests of R-GMA based Grid job monitoring system for CMS Monte Carlo data production

CERN Document Server

Bonacorsi, D; Field, L; Fisher, S; Grandi, C; Hobson, P R; Kyberd, P; MacEvoy, B; Nebrensky, J J; Tallini, H; Traylen, S

2004-01-01

High Energy Physics experiments such as CMS (Compact Muon Solenoid) at the Large Hadron Collider have unprecedented, large-scale data processing computing requirements, with data accumulating at around 1 Gbyte/s. The Grid distributed computing paradigm has been chosen as the solution to provide the requisite computing power. The demanding nature of CMS software and computing requirements, such as the production of large quantities of Monte Carlo simulated data, makes them an ideal test case for the Grid and a major driver for the development of Grid technologies. One important challenge when using the Grid for large-scale data analysis is the ability to monitor the large numbers of jobs that are being executed simultaneously at multiple remote sites. R-GMA is a monitoring and information management service for distributed resources based on the Grid Monitoring Architecture of the Global Grid Forum. In this paper we report on the first measurements of R-GMA as part of a monitoring architecture to be used for b...

Visible light cure characteristics of a cycloaliphatic polyester dimethacrylate alternative oligomer to bisGMA.

Science.gov (United States)

Vaidyanathan, Tritala K; Vaidyanathan, Jayalakshmi

2015-12-01

Objective : The goal of this study was to characterize the light curing characteristics of a new oligomer PEM-665 designed to be used as an alternative monomer to BisGMA. Materials and methods : PEM-665 (P) and BisGMA (B) solutions were prepared with triethylene glycol dimethacrylate (T) diluent in different weight proportions (70/30 and 50/50). Solutions containing 70% P and 30% T were designated as 70PT, 70%B and 30%T as 70BT, 50%P and 50%T as 50PT and 50%B and 50%T as 50BT. The initiators were CQ (EDMAB was used as amine accelerator for CQ) and DPO in 1% concentration. Eight solutions were prepared in a factorial design: 70PT/DPO; 70PT/CQ; 50PT/DPO; 50PT/CQ; 70BT/DPO; 70BT/CQ; 50BT/DPO; 50BT/CQ. BISCO VIP visible light was used to cure the monomer solutions using 30 s exposure time and 400 W power setting. TA Instruments Differential Scanning Calorimeter (DSC 2910) was used to determine the heat of cure (J/g) during polymerization at 37 °C, from which molar heat of cure (kJ/mole) and %Conversion values were estimated. Results : Range of mean values as a function monomer selections were: heat of cure (J/g): 161.7 for 70PT/DPO system to 198.6 for 50BT/CQ system; molar heat of cure (kJ/mole): 67.3 for 70BT/DPO to 78.86 for 50PT/CQ; % conversion: 59.9 for 70BT/DPO to 70.3 for 50PT/CQ. Analysis of variance and Tukey HSD pairwise contrast showed statistically significant differences between % conversion means of PEM and BisGMA mixtures, with PEM mixtures showing significantly higher mean values. Conclusions : The results suggest that PEM-665 is a promising candidate material for dental polymer applications.

Augmentation of cellular and humoral immune responses to HPV16 and HPV18 E6 and E7 antigens by VGX-3100

Directory of Open Access Journals (Sweden)

Matthew P Morrow

2016-01-01

Full Text Available We have previously demonstrated the immunogenicity of VGX-3100, a multicomponent DNA immunotherapy for the treatment of Human Papillomavirus (HPV16/18-positive CIN2/3 in a phase 1 clinical trial. Here, we report on the ability to boost immune responses with an additional dose of VGX-3100. Patients completing our initial phase 1 trial were offered enrollment into a follow on trial consisting of a single boost dose of VGX-3100. Data show both cellular and humoral immune responses could be augmented above pre-boost levels, including the induction of interferon (IFNγ production, tumor necrosis factor (TNFα production, CD8+ T cell activation and the synthesis of lytic proteins. Moreover, observation of antigen-specific regulation of immune-related gene transcripts suggests the induction of a proinflammatory response following the boost. Analysis of T cell receptor (TCR sequencing suggests the localization of putative HPV-specific T cell clones to the cervical mucosa, which underscores the putative mechanism of action of lesion regression and HPV16/18 elimination noted in our double-blind placebo-controlled phase 2B trial. Taken together, these data indicate that VGX-3100 drives the induction of robust cellular and humoral immune responses that can be augmented by a fourth “booster” dose. These data could be important in the scope of increasing the clinical efficacy rate of VGX-3100.

Effects of hydration and oxygen vacancy on CO2 adsorption and activation on beta-Ga2O3(100).

Science.gov (United States)

Pan, Yun-xiang; Liu, Chang-jun; Mei, Donghai; Ge, Qingfeng

2010-04-20

The effects of hydration and oxygen vacancy on CO(2) adsorption on the beta-Ga(2)O(3)(100) surface have been studied using density functional theory slab calculations. Adsorbed CO(2) is activated on the dry perfect beta-Ga(2)O(3)(100) surface, resulting in a carbonate species. This adsorption is slightly endothermic, with an adsorption energy of 0.07 eV. Water is preferably adsorbed molecularly on the dry perfect beta-Ga(2)O(3)(100) surface with an adsorption energy of -0.56 eV, producing a hydrated perfect beta-Ga(2)O(3)(100) surface. Adsorption of CO(2) on the hydrated surface as a carbonate species is also endothermic, with an adsorption energy of 0.14 eV, indicating a slightly repulsive interaction when H(2)O and CO(2) are coadsorbed. The carbonate species on the hydrated perfect surface can be protonated by the coadsorbed H(2)O to a bicarbonate species, making the CO(2) adsorption exothermic, with an adsorption energy of -0.13 eV. The effect of defects on CO(2) adsorption and activation has been examined by creating an oxygen vacancy on the dry beta-Ga(2)O(3)(100) surface. The formation of an oxygen vacancy is endothermic, by 0.34 eV, with respect to a free O(2) molecule in the gas phase. Presence of the oxygen vacancy promoted the adsorption and activation of CO(2). In the most stable CO(2) adsorption configuration on the dry defective beta-Ga(2)O(3)(100) surface with an oxygen vacancy, one of the oxygen atoms of the adsorbed CO(2) occupies the oxygen vacancy site, and the CO(2) adsorption energy is -0.31 eV. Water favors dissociative adsorption at the oxygen vacancy site on the defective surface. This process is spontaneous, with a reaction energy of -0.62 eV. These results indicate that, when water and CO(2) are present in the adsorption system simultaneously, water will compete with CO(2) for the oxygen vacancy sites and impact CO(2) adsorption and conversion negatively.

Poly(GMA/MA/MBAA) Copolymer Beads: a Highly Efficient Support Immobilizing Penicillin G Acylase

Institute of Scientific and Technical Information of China (English)

Ping XUE; Guan Zhong LU; Wan Yi LIU

2006-01-01

The hydrophilic, macroporous and beaded ternary copolymer of glycidyl methacrylate (GMA)/methacrylamide(MA)/N,N'-methylene-bis(acrylamide)(MBAA)was synthesized using the industrial agents by inverse suspension polymerization. The apparent activity of the immobilized penicillin G acylase reached 1096 IU/g for hydrolysis penicillin G on the beads with diameter of 0.11-0.13 mm, and it changed hardly after 50 cycles. It can be expected to be a good potential in industrial application.

A high-throughput readout architecture based on PCI-Express Gen3 and DirectGMA technology

International Nuclear Information System (INIS)

Rota, L.; Vogelgesang, M.; Perez, L.E. Ardila; Caselle, M.; Chilingaryan, S.; Dritschler, T.; Zilio, N.; Kopmann, A.; Balzer, M.; Weber, M.

2016-01-01

Modern physics experiments produce multi-GB/s data rates. Fast data links and high performance computing stages are required for continuous data acquisition and processing. Because of their intrinsic parallelism and computational power, GPUs emerged as an ideal solution to process this data in high performance computing applications. In this paper we present a high-throughput platform based on direct FPGA-GPU communication. The architecture consists of a Direct Memory Access (DMA) engine compatible with the Xilinx PCI-Express core, a Linux driver for register access, and high- level software to manage direct memory transfers using AMD's DirectGMA technology. Measurements with a Gen3 x8 link show a throughput of 6.4 GB/s for transfers to GPU memory and 6.6 GB/s to system memory. We also assess the possibility of using the architecture in low latency systems: preliminary measurements show a round-trip latency as low as 1 μs for data transfers to system memory, while the additional latency introduced by OpenCL scheduling is the current limitation for GPU based systems. Our implementation is suitable for real-time DAQ system applications ranging from photon science and medical imaging to High Energy Physics (HEP) systems

Hematopoietic stem cell mobilizing agents G-CSF, cyclophosphamide or AMD3100 have distinct mechanisms of action on bone marrow HSC niches and bone formation.

Science.gov (United States)

Winkler, I G; Pettit, A R; Raggatt, L J; Jacobsen, R N; Forristal, C E; Barbier, V; Nowlan, B; Cisterne, A; Bendall, L J; Sims, N A; Lévesque, J-P

2012-07-01

The CXCR4 antagonist AMD3100 is progressively replacing cyclophosphamide (CYP) as adjuvant to granulocyte colony-stimulating factor (G-CSF) to mobilize hematopoietic stem cells (HSC) for autologous transplants in patients who failed prior mobilization with G-CSF alone. It has recently emerged that G-CSF mediates HSC mobilization and inhibits bone formation via specific bone marrow (BM) macrophages. We compared the effect of these three mobilizing agents on BM macrophages, bone formation, osteoblasts, HSC niches and HSC reconstitution potential. Both G-CSF and CYP suppressed niche-supportive macrophages and osteoblasts, and inhibited expression of endosteal cytokines resulting in major impairment of HSC reconstitution potential remaining in the mobilized BM. In sharp contrast, although AMD3100 was effective at mobilizing HSC, it did not suppress osteoblasts, endosteal cytokine expression or reconstitution potential of HSC remaining in the mobilized BM. In conclusion, although G-CSF, CYP and AMD3100 efficiently mobilize HSC into the blood, their effects on HSC niches and bone formation are distinct with both G-CSF and CYP targeting HSC niche function and bone formation, whereas AMD3100 directly targets HSC without altering niche function or bone formation.

Alpha-tocopherol succinate- and AMD3100-mobilized progenitors mitigate radiation combined injury in mice

International Nuclear Information System (INIS)

Singh, Vijay K.; Wise, Stephen Y.; Fatanmi, Oluseyi O.; Beattie, Lindsay A.; Ducey, Elizabeth J.; Seed, Thomas M.

2014-01-01

The purpose of this study was to elucidate the role of alpha-tocopherol succinate (TS)- and AMD3100-mobilized progenitors in mitigating combined injury associated with acute radiation exposure in combination with secondary physical wounding. CD2F1 mice were exposed to high doses of cobalt-60 gamma-radiation and then transfused intravenously with 5 million peripheral blood mononuclear cells (PBMCs) from TS- and AMD3100-injected mice after irradiation. Within 1 h after irradiation, mice were exposed to secondary wounding. Mice were observed for 30 d after irradiation and cytokine analysis was conducted by multiplex Luminex assay at various time-points after irradiation and wounding. Our results initially demonstrated that transfusion of TS-mobilized progenitors from normal mice enhanced survival of acutely irradiated mice exposed 24 h prior to transfusion to supralethal doses (11.5–12.5 Gy) of 60 Co gamma-radiation. Subsequently, comparable transfusions of TS-mobilized progenitors were shown to significantly mitigate severe combined injuries in acutely irradiated mice. TS administered 24 h before irradiation was able to protect mice against combined injury as well. Cytokine results demonstrated that wounding modulates irradiation-induced cytokines. This study further supports the conclusion that the infusion of TS-mobilized progenitor-containing PBMCs acts as a bridging therapy in radiation-combined-injury mice. We suggest that this novel bridging therapeutic approach involving the infusion of TS-mobilized hematopoietic progenitors following acute radiation exposure or combined injury might be applicable to humans. (author)

Influence of shielding gas on the mechanical and metallurgical properties of DP-GMA-welded 5083-H321 aluminum alloy

Science.gov (United States)

Koushki, Amin Reza; Goodarzi, Massoud; Paidar, Moslem

2016-12-01

In the present research, 6-mm-thick 5083-H321 aluminum alloy was joined by the double-pulsed gas metal arc welding (DP-GMAW) process. The objective was to investigate the influence of the shielding gas composition on the microstructure and properties of GMA welds. A macrostructural study indicated that the addition of nitrogen and oxygen to the argon shielding gas resulted in better weld penetration. Furthermore, the tensile strength and bending strength of the welds were improved when oxygen and nitrogen (at concentrations as high as approximately 0.1vol%) were added to the shielding gas; however, these properties were adversely affected when the oxygen and nitrogen contents were increased further. This behavior was attributed to the formation of excessive brown and black oxide films on the bead surface, the formation of intermetallic compounds in the weld metal, and the formation of thicker oxide layers on the bead surface with increasing nitrogen and oxygen contents in the argon-based shielding gas. Analysis by energy-dispersive X-ray spectroscopy revealed that most of these compounds are nitrides or oxides.

Development of a built-in type Control Rod Drive Mechanism (CRDM) for Advanced Marine Reactor X (MRX)

International Nuclear Information System (INIS)

Ishizaka, Y.; Iida, H.; Yamaji, A.

1992-01-01

For realization of the next generation Advanced Marine Reactor X(MRX) with higher safety, design studies and basic experiments have been done on the built-in type Control Rod Drive Mechanism (CRDM). The concept has been made clear of the CRDM that can be placed inside the reactor vessel and fits best to the MRX - an integrated-type PWR. In particular, the design has almost been completed for the driving motor and the latch magnet, which are the core of this CRDM. It is expected that the required performance can be assured even if there are losses due to the high temperature effect. (author)

BisGMA-polyvinylpyrrolidone blend based nanocomposites reinforced with chitosan grafted f-multiwalled carbon nanotubes

Directory of Open Access Journals (Sweden)

A. Praharaj

2015-01-01

Full Text Available In this work, initially a non-destroyable surface grafting of acid functionalized multiwalled carbon nanotubes (f-MWCNTs with biopolymer chitosan (CS was carried out using glutaraldehyde as a cross-linking agent via the controlled covalent deposition method which was characterized by Fourier transform infrared spectroscopy (FTIR and scanning electron microscopy (SEM. Then, BisGMA (bisphenol-A glycidyldimethacrylate-polyvinylpyrrolidone (PVP blend was prepared (50:50 wt% by a simple sonication method. The CS grafted f-MWCNTs (CS/f-MWCNTs were finally dispersed in BisGMA-PVP blend (BGP50 system in different compositions i.e. 0, 2, 5 and 7 wt% and pressed into molds for the fabrication of reinforced nanocomposites which were characterized by SEM. Nanocomposites reinforced with 2 wt% raw MWCNTs and acid f-MWCNTs were also fabricated and their properties were studied in detail. The results of comparative study report lower values of the investigated properties in nanocomposites with 2 wt% raw and f-MWCNTs than the one with 2 wt% CS/f-MWCNTs proving it to be a better reinforcing nanofiller. Further, the mechanical behavior of the nanocomposites with various CS/f-MWCNTs content showed a dramatic increase in Young’s Modulus, tensile strength, impact strength and hardness along with improved dynamic mechanical, thermal and electrical properties at 5 wt% content of CS/f-MWCNTs. The addition of CS/f-MWCNTs also resulted in reduced corrosion and swelling properties. Thus, the fabricated nanocomposites with optimum nanofiller content could serve as low cost and light weight structural, thermal and electrical materials compatible in various corrosive and solvent based environments.

Enhanced photocatalytic performance of KNbO3(100)/reduced graphene oxide nanocomposites investigated using first-principles calculations: RGO reductivity effect

Science.gov (United States)

Zhang, Pan; Shen, Yanqing; Wu, Wenjing; Li, Jun; Zhou, Zhongxiang

2018-03-01

Although a number of various reduced graphene oxide (RGO)-based nanomaterials with enhanced photocatalytic performance have recently been characterized, the effect of RGO reductivity on their performance is still not clear. Herein, KNbO3(100) surface modification with three RGO sheets of different reductivity is investigated using first-principles calculations, revealing that increasing RGO reductivity enhances the photocatalytic performance of KNbO3(100)/RGO nanocomposites. In contrast to CeO2/RGO nanocomposites, the O atoms of RGO inhibit the photoactivity of KNbO3/RGO nanocomposites by restraining the effect of inducing a red shift of the corresponding photocatalytic absorption spectra by C 2p states. Increased RGO reductivity extends its absorption edge to the visible light region of the optical absorption and also promotes charge transfer from the KNbO3(100) surface to RGO sheets, in contrast to the behavior observed for g-C3N4/RGO composites. Overall, this work provides a reasonable explanation of controversial experimental results obtained previously, paving the way to the development of highly efficient RGO-based photocatalysts and promoting further photocatalytic applications of KNbO3/RGO nanocomposites.

The Adsorption of Calmoduline via Nicotinamide Immobilized Poly(HEMA-GMA Cryogels

Directory of Open Access Journals (Sweden)

Kadir Erol

2016-12-01

Full Text Available The separation and purification methods for the isolation of an important biomolecule calmoduline protein is extremely important. Among these methods, the adsorption technique is extremely popular, and the cryogels as adsorbents with the macro porous structure and interconnected flow channels cryogel they have are preferred in this field. In this study, the adsorption of calmoduline via Ca(II immobilized poly (2-hydroxyethyl methacrylate-glycidyl methacrylate, poly (HEMA-GMA, cryogels through changing interaction time, calmoduline initial concentration and temperature conditions. For the characterization of cryogels, the swelling test, Fourier Transform Infrared (FT-IR Spectroscopy, Scanning Electron Microscopy (SEM, surface area (BET, elemental analysis and ICP-OES methods were performed. Nicotinamide molecule was used as Ca (II chelating agent and the adsorption capacity of the cryogels was estimated as 1.812 mg calmoduline / g cryogel. The adsorption models of the adsorption reaction were examined by the Langmuir and Freundlich isotherm models and was determined to be more appropriate for Langmuir isotherm model.

Postural Control in Lowlanders With COPD Traveling to 3100 m: Data From a Randomized Trial Evaluating the Effect of Preventive Dexamethasone Treatment

Directory of Open Access Journals (Sweden)

Lara Muralt

2018-06-01

Full Text Available Objective: To evaluate the effects of acute exposure to high altitude and preventive dexamethasone treatment on postural control in patients with chronic obstructive pulmonary disease (COPD.Methods: In this randomized, double-blind parallel-group trial, 104 lowlanders with COPD GOLD 1-2 age 20–75 years, living near Bishkek (760 m, were randomized to receive either dexamethasone (2 × 4 mg/day p.o. or placebo on the day before ascent and during a 2-day sojourn at Tuja-Ashu high altitude clinic (3100 m, Kyrgyzstan. Postural control was assessed with a Wii Balance BoardTM at 760 m and 1 day after arrival at 3100 m. Patients were instructed to stand immobile on both legs with eyes open during five tests of 30 s each, while the center of pressure path length (PL was measured.Results: With ascent from 760 to 3100 m the PL increased in the placebo group from median (quartiles 29.2 (25.8; 38.2 to 31.5 (27.3; 39.3 cm (P < 0.05; in the dexamethasone group the corresponding increase from 28.8 (22.8; 34.5 to 29.9 (25.2; 37.0 cm was not significant (P = 0.10. The mean difference (95% CI between dexamethasone and placebo groups in altitude-induced changes (treatment effect was -0.3 (-3.2 to 2.5 cm, (P = 0.41. Multivariable regression analysis confirmed a significant increase in PL with higher altitude (coefficient 1.6, 95% CI 0.2 to 3.1, P = 0.031 but no effect of dexamethasone was shown (coefficient -0.2, 95% CI -0.4 to 3.6, P = 0.925, even when controlled for several potential confounders. PL changes were related more to antero-posterior than lateral sway. Twenty-two of 104 patients had an altitude-related increase in the antero-posterior sway velocity of >25%, what has been associated with an increased risk of falls in previous studies.Conclusion: Lowlanders with COPD travelling from 760 to 3100 m revealed postural instability 24 h after arriving at high altitude, and this was not prevented by dexamethasone.Trial Registration

Influence of ionizing radiation on the mechanical properties of BisGMA/TEGDMA based experimental resin

International Nuclear Information System (INIS)

LMP, Campos; Boaro, LC; LKG, Santos; Parra, DF; Lugão, AB

2015-01-01

Dental restorative composites are activated by visible light and the polymerization process, known as direct technique, is initiated by absorbing light in a specific wavelength range (450–500 nm). However this technique presented some disadvantages. If light is not inserted correctly, layers uncured can cause countless damage to restoration, especially with regard to mechanical properties. A clinical alternative used to reduce the shortcomings of direct application is the use of composite resins for indirect application. These composites are adaptations of resins prepared for direct use, with differences mainly in the healing process. Besides the traditional photoactivation, indirect application composites may be submitted to particular curing conditions, such as a slow curing rate, heating, vacuum, and inert-gas pressure leading to an oxygen-free environment. However few studies have been conducted on the process of post-curing by ionizing radiation at low doses. On this sense the purpose of this study was to evaluate possible interactions of ionizing radiation in the post-curing process of the experimental composites based on BisGMA/TEGDMA filled with silica Aerosil OX-50 silanized. Characterization of the experimental composites was performed by thermogravimetry analysis, infrared spectroscopy, elastic modulus and flexural strength. Statistical analysis of results was calculated by one-way ANOVA/Tukey's test. Cross-linking of the polymeric matrix caused by ionizing radiation, influenced the thermal stability of irradiated specimens. FTIR analysis showed that the ionizing radiation induced a post-cure reaction in the specimens. The irradiation dose influenced directly the mechanical properties that showed a strong positive correlation between flexural strength and irradiation and between modulus strength and irradiation. - Highlights: • Interactions of ionizing radiation in BisGMA/TEGDMA experimental dental composites filled with sylanized silica. �

A Non-Intrusive GMA Welding Process Quality Monitoring System Using Acoustic Sensing.

Science.gov (United States)

Cayo, Eber Huanca; Alfaro, Sadek Crisostomo Absi

2009-01-01

Most of the inspection methods used for detection and localization of welding disturbances are based on the evaluation of some direct measurements of welding parameters. This direct measurement requires an insertion of sensors during the welding process which could somehow alter the behavior of the metallic transference. An inspection method that evaluates the GMA welding process evolution using a non-intrusive process sensing would allow not only the identification of disturbances during welding runs and thus reduce inspection time, but would also reduce the interference on the process caused by the direct sensing. In this paper a nonintrusive method for weld disturbance detection and localization for weld quality evaluation is demonstrated. The system is based on the acoustic sensing of the welding electrical arc. During repetitive tests in welds without disturbances, the stability acoustic parameters were calculated and used as comparison references for the detection and location of disturbances during the weld runs.

[Splenic infarction at high altitude, Huaraz-Peru (3,100 masl)].

Science.gov (United States)

López de Guimaraes, Douglas; Menacho López, Julio; Villanueva Palacios, Jovita; Mosquera Vásquez, Vitaliano

2009-01-01

We report three cases of splenic infarction in healthy men for the first time that amounted to high altitudes, observed in the hospital "Victor Ramos Guardia" Huaraz (3100 m). Case 1 (1995) of 55 years, born in Cuba, from Lima, caucasian suddenly presented acute abdominal pain in epigastrium, distension, nausea and vomiting, was laparotomized for acute abdomen and surgical pathology revealed thrombosis with splenic infarction splenic artery and vein. During follow-up in Lima, hemoglobin electrophoresis showed that it was heterozygous carrier of the sickle trait (Hb A: 57% Hb S: 38.5%). Case 2 (1998) of 23 years, born in Cuba, from Lima, Black said acute abdominal pain in left hypochondrium, shortness of breath and chest pain, clinical examination and radiography of the abdomen showed the spleen volume increased. Case 3 (2006) of 17 years, natural and from Lima, mestizo, who came on tour promotion, acute abdominal pain referred onset in the epigastrium and left hypochondrium, headache, increase heat, nausea and vomiting, pharyngitis was found acute and painful, and spleen increased in size by clinical and x-ray of abdomen simple stand. None had no history of hemoglobinopathy and anemia. In general, medical management was supportive and cases 2 and 3 are recommended hemoglobin electrophoresis. We conclude that we must think of splenic infarction associated with height in any healthy person who is first at high altitude (> 3000m) and having a sudden acute abdominal pain in epigastrium and / or left hypochondrium, pain and palpable spleen and radiological study compatible with image. In this case is indicated by hemoglobin electrophoresis to determine whether there is an individual heterozygous carrier of the sickle trait. splenic infarction, high altitude, sickle trait, Huaraz.

Nationaler Kompetenzbasierter Lernzielkatalog Medizin (NKLM für Deutschland: Zusammenarbeit der Gesellschaft für Medizinische Ausbildung (GMA und des Medizinischen Fakultätentages (MFT [National Competence-Based Learning Objectives for Undergraduate Medical Education (NKLM in Germany: Cooperation of the Association for Medical Education (GMA and the Association of Medical Faculties in Germany (MFT

Directory of Open Access Journals (Sweden)

Hahn, Eckhart G.

2009-08-01

Full Text Available [english] The Framework for Qualifications of the European Higher Education Area (FQ-EHEA; Bologna Process and the European Qualifications Framework for Lifelong Learning (EQF-LLL; Lisbon Process are competence-driven frameworks for vocational and higher education programmes in need for defined learning objectives. In the field of medical education, The Netherlands and Switzerland have developed national catalogues for undergraduate medical training, which are competence-based and compatible with a two-cycle curriculum comprised of a Bachelor in Medicine and a Master in Medicine. In Germany, virtually all medical organizations, last not least the Association of Medical Faculties (MFT, have voted against the application of the two-cycle (and the three-cycle curriculum to medical undergraduate education. A standstill of the European processes will not be accepted in the political arena, and a proposition was made by the Conference of German Ministers of Higher Education to develop a medical qualification framework for Germany, asking the Association for Medical Education (GMA and the MFT to join forces. This is not possible without consented national learning objectives derived from the professional context of physicians. The GMA has teamed up with the MFT to develop National Competence-Based Learning Objectives for Undergraduate Medical Education (NKLM in Germany (see Figure 1 to fulfill these needs.

Kinetic Parameters during Bis-GMA and TEGDMA Monomer Polymerization by ATR-FTIR: The Influence of Photoinitiator and Light Curing Source

Directory of Open Access Journals (Sweden)

Aline B. Denis

2016-01-01

Full Text Available This study aimed to analyze the kinetic parameters of two monomers using attenuated total reflectance Fourier transform infrared (ATR-FTIR: 2,2-bis-[4-(2-hydroxy-3-methacryloxypropyl-1-oxy-phenyl] propane (Bis-GMA and triethylene glycol dimethacrylate (TEGDMA. The following were calculated to evaluate the kinetic parameters: maximum conversion rate (Rpmax, time at the maximum polymerization rate (tmax, conversion at Rpmax, and total conversion recorded at the maximum conversion point after 300 s. Camphorquinone (CQ and phenyl propanedione (PPD were used in this study as photoinitiators, whereas N,N-dimethyl-p-toluidine (DMPT amine was used as a coinitiator. LED apparatus and halogen lamp were used in turn to evaluate the effect that light source had on the monomer kinetics. The mass concentration ratio for the three resin preparations was 0.7 : 0.3 for Bis-GMA and TEGDMA: R1 (CQ + DMPT, R2 (PPD + DMPT, and R3 (PPD + CQ + DMPT. The PPD association with the CQ photoinitiator altered the polymerization kinetics compared to a resin containing only the CQ photoinitiator. The light sources exhibited no significant differences for tmax of R1 and R3. Resins containing only the PPD initiator exhibited a higher tmax than those containing only CQ. However, the Rpmax decreased for resins containing the PPD photoinitiator.

CXCR4 antagonist AMD3100 reverses the neurogenesis and behavioral recovery promoted by forced limb-use in stroke rats.

Science.gov (United States)

Zhao, Shanshan; Qu, Huiling; Zhao, Yi; Xiao, Ting; Zhao, Mei; Li, Yong; Jolkkonen, Jukka; Cao, Yunpeng; Zhao, Chuansheng

2015-01-01

Forced limb-use can enhance neurogenesis and behavioral recovery as well as increasing the level of stromal cell-derived factor-1 (SDF-1) in stroke rats. We examined whether the SDF-1/CXCR4 pathway is involved in the enhanced neurogenesis and promoted behavioral recovery induced by forced limb-use in the chronic phase of stroke. The CXCR4 antagonist, AMD3100, was used to block the SDF-1/CXCR4 pathway in the ischemic rats. Brain ischemia was induced by endothelin-1. One week after ischemia, the unimpaired forelimb of rats was immobilized for 3 weeks. The proliferation, migration, and survival of DCX-positive cells in the subventricular zone (SVZ), and the dendritic complexity of DCX-positive cells in the dentate gyrus (DG), as well as the inflammatory response in the infarcted striatum were analyzed by immunohistochemistry. Functional recovery was assessed in beam-walking and water maze tests. Forced limb-use enhanced the proliferation, migration, dendritic complexity and the survival of newborn neurons. Furthermore, forced limb-use suppressed the inflammatory response and improved both motor and cognitive functions after stroke. AMD3100 significantly abrogated the enhanced neurogenesis and behavioral recovery induced by forced limb-use without influencing the inflammatory response. SDF-1/CXCR4 pathway seems to be involved in the enhancement of neurogenesis and behavioral recovery induced by post-stroke forced limb-use.

Mutations at the CXCR4 interaction sites for AMD3100 influence anti-CXCR4 antibody binding and HIV-1 entry

DEFF Research Database (Denmark)

Hatse, Sigrid; Princen, Katrien; Vermeire, Kurt

2003-01-01

The interaction of the CXCR4 antagonist AMD3100 with its target is greatly influenced by specific aspartate residues in the receptor protein, including Asp(171) and Asp(262). We have now found that aspartate-to-asparagine substitutions at these positions differentially affect the binding of four...

Performance of R-GMA based grid job monitoring system for CMS data production

CERN Document Server

Byrom, Robert; Fisher, Steve M; Grandi, Claudio; Hobson, Peter R; Kyberd, Paul; MacEvoy, Barry; Nebrensky, Jindrich Josef; Tallini, Hugh; Traylen, Stephen

2004-01-01

High Energy Physics experiments, such as the Compact Muon Solenoid (CMS) at the CERN laboratory in Geneva, have large-scale data processing requirements, with stored data accumulating at a rate of 1 Gbyte/s. This load comfortably exceeds any previous processing requirements and we believe it may be most efficiently satisfied through Grid computing. Management of large Monte Carlo productions (~3000 jobs) or data analyses and the quality assurance of the results requires careful monitoring and bookkeeping, and an important requirement when using the Grid is the ability to monitor transparently the large number of jobs that are being executed simultaneously at multiple remote sites. R-GMA is a monitoring and information management service for distributed resources based on the Grid Monitoring Architecture of the Global Grid Forum. We have previously developed a system allowing us to test its performance under a heavy load while using few real Grid resources. We present the latest results on this system and comp...

Nuclear reactors built, being built, or planned 1992

International Nuclear Information System (INIS)

1993-07-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1992. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. Information is presented on five parts: Civilian, Production, Military, Export and Critical Assembly

Nuclear reactors built, being built, or planned: 1989

International Nuclear Information System (INIS)

1990-06-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1989. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE, from the US Nuclear Regulatory Commission, from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations, from US and foreign embassies, and from foreign governmental nuclear departments. Information is presented in five parts, each of which is categorized by primary function or purpose: civilian, production, military, export, and critical assembly facilities

Nuclear reactors built, being built, or planned: 1986

International Nuclear Information System (INIS)

Carter, E.P.

1987-03-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1986, which are capable of sustaining a nuclear chain reaction. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commisssion; from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; and from US embassies of foreign countries. Information is presented in five parts, each of which is categorized by primary function or purpose: civilian, production, military, export, and critical assembly facilities

Nuclear reactors built, being built, or planned 1993

International Nuclear Information System (INIS)

1993-08-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1993. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: civilian, production, military, export, and critical assembly

Beyond Comfort in Built Environments

NARCIS (Netherlands)

Bazley, C.M.

2015-01-01

Every person on the planet lives a significant portion of his or her life in a built indoor environment. Ideally, the built environment serves as protection from the extremes of the outdoor environment and is preferably comfortable. The first ‘built environment’ was a painted cave. The cave served

Nuclear reactors built, being built, or planned in the United States

International Nuclear Information System (INIS)

1984-08-01

This booklet contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of Apr. 30, 1984, which are capable of sustaining a nuclear chain reaction. Information is presented in five parts, each of which is categorized by primary function or purpose: civilian, military, production, export, and critical assembly facilities

Nuclear reactors built, being built, or planned in the United States

International Nuclear Information System (INIS)

Carter, E.P.

1985-09-01

This publication contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of March 1985, which are capable of sustaining a nuclear chain reaction. Information is presented in five parts, each of which is categorized by primary function or purpose: civilian, production, military, export, and critical assembly facilities

Radiation dosimeter built with plastic scintillator

International Nuclear Information System (INIS)

Barrea, R.A.

1990-01-01

Ionization chambers, with air equivalent plastic walls, have been used as the main x-ray dosimetry system, since its response permits to give the doses in Roentgens. From the commercial availability of plastic scintillators with air equivalent atomic number we have studied its use in x-ray dosimetry. This paper devised a system with which it is possible to reduce side effects that introduce errors and obtain a response independent of energy, from 20 to 180 KeV and it is also expected to behave that way for higher energies. The system has a high efficiency and precision for a wide dose range and it is then a new alternative to measure x-ray doses. Results obtained with a prototype, built ad-hog, make it possible its use with dosimetric purposes with several advantages over conventional. (author)

Nuclear reactors built, being built, or planned: 1987

International Nuclear Information System (INIS)

1988-06-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1987. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually for Washington headquarters and field offices of DOE; from the US Nuclear regulatory Commission; from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The major change in this revision involves the data related to shutdown and dismantled facilities. Because this information serves substantially different purposes, it has been accumulated in a separate section, ''Reactors and Facilities Shutdown or Dismantled.'' Cancelled reactors or reactors whose progress has been terminated at some stage before operation are included in this section

Safety Analysis Report for Packaging, Y-12 National Security Complex, Model ES-3100 Package with Bulk HEU Contents

Energy Technology Data Exchange (ETDEWEB)

Anderson, James [Y-12 National Security Complex, Oak Ridge, TN (United States); Goins, Monty [Y-12 National Security Complex, Oak Ridge, TN (United States); Paul, Pran [Y-12 National Security Complex, Oak Ridge, TN (United States); Wilkinson, Alan [Y-12 National Security Complex, Oak Ridge, TN (United States); Wilson, David [Y-12 National Security Complex, Oak Ridge, TN (United States)

2015-09-03

This safety analysis report for packaging (SARP) presents the results of the safety analysis prepared in support of the Consolidated Nuclear Security, LLC (CNS) request for licensing of the Model ES-3100 package with bulk highly enriched uranium (HEU) contents and issuance of a Type B(U) Fissile Material Certificate of Compliance. This SARP, published in the format specified in the Nuclear Regulatory Commission (NRC) Regulatory Guide 7.9 and using information provided in UCID-21218 and NRC Regulatory Guide 7.10, demonstrates that the Y-12 National Security Complex (Y-12) ES-3100 package with bulk HEU contents meets the established NRC regulations for packaging, preparation for shipment, and transportation of radioactive materials given in Title 10, Part 71, of the Code of Federal Regulations (CFR) [10 CFR 71] as well as U.S. Department of Transportation (DOT) regulations for packaging and shipment of hazardous materials given in Title 49 CFR. To protect the health and safety of the public, shipments of adioactive materials are made in packaging that is designed, fabricated, assembled, tested, procured, used, maintained, and repaired in accordance with the provisions cited above. Safety requirements addressed by the regulations that must be met when transporting radioactive materials are containment of radioactive materials, radiation shielding, and assurance of nuclear subcriticality.

Influence of solar and geomagnetic activity in Gymnodinium catenatum (Dinophyceae) cultures.

Science.gov (United States)

Vale, Paulo

2017-01-01

Laboratory cultures of the paralytic shellfish poisoning producing microalga Gymnodinium catenatum were subjected to a hypo-osmotic shock and changes in cell concentration were observed in two separate experiments of 8 and 24 hours duration, respectively. The increase in geomagnetic activity (GMA), radio and X-ray fluxes and solar X-ray flares were negatively correlated with cell numbers. Cell losses were observed in the short experiment, but not in the longest one. GMA action was related to the course of the experimental period, while electromagnetic radiation (EMR) was only significantly related when the previous hours before the experiments were considered. The differential action windows might be indicative of two differential disruptive mechanisms: EMR might act on DNA synthesis and mitosis phases of the cell cycle (taking place in the dark period) and GMA might be more disruptive at the end of mytosis or cytokinesis phases taking place in the light period. Formation of long chains (> 4 cells/chain) was reduced with salinity and with temperatures above 27ºC but increased with EMR and GMA, particularly when grown at the highest temperatures recorded during the study period (≥28ºC).

Nuclear reactors built, being built, or planned in the United States as of December 31, 1980

International Nuclear Information System (INIS)

1981-04-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1980, which are capable of sustaining a nuclear chain reaction. Information is presented in five parts, each of which is categorized by primary function or purpose: civilian, military, production, export, and critical assembly facilities

Nuclear reactors built, being built, or planned in the Unites States as of June 30, 1981

International Nuclear Information System (INIS)

Goulden, A.M.

1983-01-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of June 30, 1981, which are capable of sustaining a nuclear chain reaction. Information is presented in five parts, each of which is categorized by primary function or pupose: civilian, military, production, export, and critical assembly facilities

Nuclear reactor built, being built, or planned

International Nuclear Information System (INIS)

1991-06-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1990. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE, from the US Nuclear Regulatory Commission, from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations, from US and foreign embassies, and from foreign governmental nuclear departments. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables; Section 2 includes nuclear reactors that are operating, being built, or planned; and Section 3 includes reactors that have been shut down permanently or dismantled. Sections 2 and 3 contain the following classification of reactors: Civilian, Production, Military, Export, and Critical Assembly

X-ray TV image analyzer with built-in microcomputer

International Nuclear Information System (INIS)

Takizawa, Masaomi; Maruyama, Kiyoshi; Fujii, Tadashige; Hirayama, Jiro

1979-01-01

X-ray TV system (XTV) is indispensable for inspections such as cardiac catheter inspection and urinary tract inspection as well as gastrointestinal tract inspection. The XTV has been so far employed for observing the appropriate time for making images and grasping the position to be photographed in X-ray photographing. However, taking the considerable amount of radiation exposure given to patients during fluoroscopy into account, it is better to utilize the information within living bodies more effectively. The experiments to record fluoroscopic images using VTRs (video tape recorder) and to analyze the moving pictures by means of VTR playback have been carried out by videodensitometry and videoplanimetry. The authors have produced an image analyzing system of XTV, which incorporates a microprocessor, on the basis of the experiences of minicomputer-assisted videodensitometry. The system uses the digital frame memory controlled by a microcomputer, and transfers the data from this memory to the main memory by the command from the microcomputer. This alloys to sample freely image data in any direction. To the microprocessor memory, 16 kbytes EPROM (erasable and programmable read only memory) and 16 kbytes RAM (random access memory) are attached. At present, the programs for the measurement of such as the inspection of local pulmonary function and the change of urethrae in urination accompanying the imaging of bladders are being developed. Some results of videodensitometry under test are presented. Wider applications for future are expected in the discussions. (Wakatsuki, Y.)

Nuclear reactors built, being built, or planned, 1988

International Nuclear Information System (INIS)

1989-08-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1988. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington Headquarters and field offices of DOE, from the US Nuclear Regulatory Commission, from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations, from US and foreign embassies, and from foreign governmental nuclear departments. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables. Section 2 includes nuclear reactors that are operating, being built, or planned. Section 3 includes reactors that have been shut down permanently or dismantled

Influence of strain relaxation in axial {{In}}_{x}{{Ga}}_{1-x}{\\rm{N}}/{GaN} nanowire heterostructures on their electronic properties

Science.gov (United States)

Marquardt, Oliver; Krause, Thilo; Kaganer, Vladimir; Martín-Sánchez, Javier; Hanke, Michael; Brandt, Oliver

2017-05-01

We present a systematic theoretical study of the influence of elastic strain relaxation on the built-in electrostatic potentials and the electronic properties of axial {{In}}x{{Ga}}1-x{{N}}/{GaN} nanowire (NW) heterostructures. Our simulations reveal that for a sufficiently large ratio between the thickness of the {{In}}x{{Ga}}1-x{{N}} disk and the diameter of the NW, the elastic relaxation leads to a significant reduction of the built-in electrostatic potential in comparison to a planar system of similar layer thickness and In content. In this case, the ground state transition energies approach constant values with increasing thickness of the disk and only depend on the In content, a behavior usually associated to that of a quantum well free of built-in electrostatic potentials. We show that the structures under consideration are by no means field-free, and the built-in potentials continue to play an important role even for ultrathin NWs. In particular, strain and the resulting polarization potentials induce complex confinement features of electrons and holes, which depend on the In content, shape, and dimensions of the heterostructure.

Decays of J/psi (3100) to baryon final states

International Nuclear Information System (INIS)

Eaton, M.W.

1982-05-01

We present results for the decays of psi(3100) into baryon and hyperon final states. The sample studied here consists of 1.3 million produced psi decays. The decays into nonstrange baryons agree well with currently established results, but with better statistics. In addition, significant resonance formation in multibody final states is observed. The decay psi → anti ppγ, the first direct photon decay of the psi involving baryons in the final state, is presented and the theoretical implications of the decays are briefly explored. Several new decays of the psi involving strange baryons are explored, including the first observations of three body final states involving hyperons. The I-spin symmetry of the strong decay psi → baryons has clearly been observed. The reduced matrix elements for psi → B anti B are presented for final states of different SU(3) content. The B 8 anti B 8 results are in excellent agreement with the psi being an SU(3) singlet as are the results for psi → B 10 anti B 10 . We present the first evidence for the SU(3) violating decays of the type psi → B 8 anti B 10 + c.c.. Angular distributions for psi → B 8 anti B 8 are presented and compared with theoretical predictions. Statistics are limited, but the data tends to prefer other than a 1 + Cos 2 theta distribution

Nuclear reactors built, being built, or planned 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-01

This publication contains unclassified information about facilities, built, being built, or planned in the United States for domestic use or export as of December 31, 1996. The Office of Scientific and Technical Information, U.S. Department of Energy, gathers this information annually from Washington headquarters, and field offices of DOE; from the U.S. Nuclear Regulatory Commission (NRC); from the U. S. reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from U.S. and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled.

Nuclear reactors built, being built, or planned: 1996

International Nuclear Information System (INIS)

1997-08-01

This publication contains unclassified information about facilities, built, being built, or planned in the United States for domestic use or export as of December 31, 1996. The Office of Scientific and Technical Information, U.S. Department of Energy, gathers this information annually from Washington headquarters, and field offices of DOE; from the U.S. Nuclear Regulatory Commission (NRC); from the U. S. reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from U.S. and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled

EM Modeling of Far-Field Radiation Patterns for Antennas on the GMA-TT UAV

Science.gov (United States)

Mackenzie, Anne I.

2015-01-01

To optimize communication with the Generic Modular Aircraft T-Tail (GMA-TT) unmanned aerial vehicle (UAV), electromagnetic (EM) simulations have been performed to predict the performance of two antenna types on the aircraft. Simulated far-field radiation patterns tell the amount of power radiated by the antennas and the aircraft together, taking into account blockage by the aircraft as well as radiation by conducting and dielectric portions of the aircraft. With a knowledge of the polarization and distance of the two communicating antennas, e.g. one on the UAV and one on the ground, and the transmitted signal strength, a calculation may be performed to find the strength of the signal travelling from one antenna to the other and to check that the transmitted signal meets the receiver system requirements for the designated range. In order to do this, the antenna frequency and polarization must be known for each antenna, in addition to its design and location. The permittivity, permeability, and geometry of the UAV components must also be known. The full-wave method of moments solution produces the appropriate dBi radiation pattern in which the received signal strength is calculated relative to that of an isotropic radiator.

Nuclear reactors built, being built, or planned, 1991

Energy Technology Data Exchange (ETDEWEB)

Simpson, B.

1992-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1991. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables; Section 2 includes nuclear reactors that are operating, being built, or planned; and Section 3 includes reactors that have been shut down permanently or dismantled. Sections 2 and 3 contain the following classification of reactors: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is an American company -- working either independently or in cooperation with a foreign company (Part 4, in each section). Critical assembly refers to an assembly of fuel and assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5).

Nuclear reactors built, being built, or planned, 1991

International Nuclear Information System (INIS)

Simpson, B.

1992-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1991. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables; Section 2 includes nuclear reactors that are operating, being built, or planned; and Section 3 includes reactors that have been shut down permanently or dismantled. Sections 2 and 3 contain the following classification of reactors: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is an American company -- working either independently or in cooperation with a foreign company (Part 4, in each section). Critical assembly refers to an assembly of fuel and assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5)

Nuclear reactors built, being built, or planned in the United States

International Nuclear Information System (INIS)

Goulden, A.M.

1983-08-01

This semiannual compilation provides current information about facilities for domestic use or export which are capable of sustaining a nuclear chain reaction. Civilian, production, and military reactors are listed, as are reactors for export and critical assembly facilities. Information given includes location, owner, principal nuclear contractor, type, power rating, docket number, and start-up and shutdown dates. Nuclear Reactors Built, Being Built, or Planned is also available on standing order (PB83-903000) through a deposit account with the National Technical Information Service, Springfield, VA 22161

Pollutant dispersion in built environment

CERN Document Server

Ming, Tingzhen; Gong, Tingrui; Li, Zhengtong

2017-01-01

This book discusses energy transfer, fluid flow and pollution in built environments. It provides a comprehensive overview of the highly detailed fundamental theories as well as the technologies used and the application of heat and mass transfer and fluid flow in built environments, with a focus on the mathematical models and computational and experimental methods. It is a valuable resource for researchers in the fields of buildings and environment, heat transfer and global warming.

The WHIM-like CXCR4(S338X) somatic mutation activates AKT and ERK, and promotes resistance to ibrutinib and other agents used in the treatment of Waldenstrom's Macroglobulinemia.

Science.gov (United States)

Cao, Y; Hunter, Z R; Liu, X; Xu, L; Yang, G; Chen, J; Patterson, C J; Tsakmaklis, N; Kanan, S; Rodig, S; Castillo, J J; Treon, S P

2015-01-01

CXCR4(WHIM) somatic mutations are common Waldenstrom's Macroglobulinemia (WM), and are associated with clinical resistance to ibrutinib. We engineered WM cells to express the most common WHIM (Warts, Hypogammaglobulinemia, Infections and Myelokathexis), CXCR(S338X) mutation in WM. Following SDF-1a stimulation, CXCR4(S338X) WM cells exhibited decreased receptor internalization, enhanced and sustained AKT kinase (AKT) and extracellular regulated kinase (ERK) signaling, decreased poly (ADP-ribose) polymerase and caspase 3 cleavage, and decreased Annexin V staining versus CXCR4 wild-type (WT) cells. CXCR4(S338X)-related signaling and survival effects were blocked by the CXCR4 inhibitor AMD3100. SDF-1a-treated CXCR4(S338X) WM cells showed sustained AKT and ERK activation and decreased apoptotic changes versus CXCR4(WT) cells following ibrutinib treatment, findings which were also reversed by AMD3100. AKT or ERK antagonists restored ibrutinib-triggered apoptotic changes in SDF-1a-treated CXCR4(S338X) WM cells demonstrating their role in SDF-1a-mediated ibrutinib resistance. Enhanced bone marrow pAKT staining was also evident in CXCR4(WHIM) versus CXCR4(WT) WM patients, and remained active despite ibrutinib therapy in CXCR4(WHIM) patients. Last, CXCR4(S338X) WM cells showed varying levels of resistance to other WM relevant therapeutics, including bendamustine, fludarabine, bortezomib and idelalisib in the presence of SDF-1a. These studies demonstrate a functional role for CXCR4(WHIM) mutations, and provide a framework for investigation of CXCR4 inhibitors in WM.

Internal filament modulation in low-dielectric gap design for built-in selector-less resistive switching memory application

Science.gov (United States)

Chen, Ying-Chen; Lin, Chih-Yang; Huang, Hui-Chun; Kim, Sungjun; Fowler, Burt; Chang, Yao-Feng; Wu, Xiaohan; Xu, Gaobo; Chang, Ting-Chang; Lee, Jack C.

2018-02-01

Sneak path current is a severe hindrance for the application of high-density resistive random-access memory (RRAM) array designs. In this work, we demonstrate nonlinear (NL) resistive switching characteristics of a HfO x /SiO x -based stacking structure as a realization for selector-less RRAM devices. The NL characteristic was obtained and designed by optimizing the internal filament location with a low effective dielectric constant in the HfO x /SiO x structure. The stacking HfO x /SiO x -based RRAM device as the one-resistor-only memory cell is applicable without needing an additional selector device to solve the sneak path issue with a switching voltage of ~1 V, which is desirable for low-power operating in built-in nonlinearity crossbar array configurations.

Biofilms in churches built in grottoes

International Nuclear Information System (INIS)

Cennamo, Paola; Montuori, Naomi; Trojsi, Giorgio; Fatigati, Giancarlo; Moretti, Aldo

2016-01-01

We investigated microorganisms dwelling on rocks, walls and paintings in two votive chapels built in grottoes in the Region of Campania, Italy. One grotto was near the coast in an area with a Mediterranean climate, and the other grotto was inland on a mountain in an area with a cold continental climate. Color and distribution of biofilms in various areas of the grottoes were examined. Microbial components of biofilms were identified by light and electron microscopy and by molecular techniques (DNA analyses and Automatic rRNA Intergenic Spacer Analysis). Biofilms were also analyzed by X-ray diffraction to detect inorganic constituents deriving from rocks in the grottoes and walls of the churches and by X-ray fluorescence to detect the elements that made up the pigments of the mural paintings; optical cross sections were used to observe their relationships with substrata. Species of eubacteria, cyanobacteria and green algae were identified. Some of these species occurred in both grottoes, while others were exclusive to only one of the grottoes. The diversity of species, their common or exclusive occurrence in the grottoes, the relationships among microbial communities and the differences in color and distribution of biofilms were discussed on the basis of the different climatic factors affecting the two grottoes and the different inorganic components of substrata. - Highlights: • Biofilms concur to the degradation of cultural heritage. • Microorganisms cause esthetic and structural damage in votive churches. • Biofilm features vary on different substrata, as limestone, plaster and paintings. • Features of biofilms mainly depend on environmental conditions. • Molecular biology techniques are indispensable in the study of biodegradation.

Biofilms in churches built in grottoes

Energy Technology Data Exchange (ETDEWEB)

Cennamo, Paola, E-mail: paola.cennamo@unisob.na.it [Facoltà di Lettere, Università degli Studi Suor Orsola Benincasa di Napoli, Via Santa Caterina da Siena 37, 80135 Naples (Italy); Montuori, Naomi [Dipartimento di Biologia, Università degli Studi di Napoli Federico II, Via Foria 223, 80139 Naples (Italy); Trojsi, Giorgio; Fatigati, Giancarlo [Facoltà di Lettere, Università degli Studi Suor Orsola Benincasa di Napoli, Via Santa Caterina da Siena 37, 80135 Naples (Italy); Moretti, Aldo [Dipartimento di Biologia, Università degli Studi di Napoli Federico II, Via Foria 223, 80139 Naples (Italy)

2016-02-01

We investigated microorganisms dwelling on rocks, walls and paintings in two votive chapels built in grottoes in the Region of Campania, Italy. One grotto was near the coast in an area with a Mediterranean climate, and the other grotto was inland on a mountain in an area with a cold continental climate. Color and distribution of biofilms in various areas of the grottoes were examined. Microbial components of biofilms were identified by light and electron microscopy and by molecular techniques (DNA analyses and Automatic rRNA Intergenic Spacer Analysis). Biofilms were also analyzed by X-ray diffraction to detect inorganic constituents deriving from rocks in the grottoes and walls of the churches and by X-ray fluorescence to detect the elements that made up the pigments of the mural paintings; optical cross sections were used to observe their relationships with substrata. Species of eubacteria, cyanobacteria and green algae were identified. Some of these species occurred in both grottoes, while others were exclusive to only one of the grottoes. The diversity of species, their common or exclusive occurrence in the grottoes, the relationships among microbial communities and the differences in color and distribution of biofilms were discussed on the basis of the different climatic factors affecting the two grottoes and the different inorganic components of substrata. - Highlights: • Biofilms concur to the degradation of cultural heritage. • Microorganisms cause esthetic and structural damage in votive churches. • Biofilm features vary on different substrata, as limestone, plaster and paintings. • Features of biofilms mainly depend on environmental conditions. • Molecular biology techniques are indispensable in the study of biodegradation.

Discovery of an L-alanine ester prodrug of the Hsp90 inhibitor, MPC-3100.

Science.gov (United States)

Kim, Se-Ho; Tangallapally, Rajendra; Kim, In Chul; Trovato, Richard; Parker, Daniel; Patton, J Scott; Reeves, Leslie; Bradford, Chad; Wettstein, Daniel; Baichwal, Vijay; Papac, Damon; Bajji, Ashok; Carlson, Robert; Yager, Kraig M

2015-11-15

Various types of Hsp90 inhibitors have been and continue to undergo clinical investigation. One development candidate is the purine-based, synthetic Hsp90 inhibitor 1 (MPC-3100), which successfully completed a phase I clinical study. However, further clinical development of 1 was hindered by poor solubility and consequent formulation issues and promoted development of a more water soluble prodrug. Towards this end, numerous pro-moieties were explored in vitro and in vivo. These studies resulted in identification of L-alanine ester mesylate, 2i (MPC-0767), which exhibited improved aqueous solubility, adequate chemical stability, and rapid bioconversion without the need for solubilizing excipients. Based on improved physical characteristics and favorable PK and PD profiles, 2i mesylate was selected for further development. A convergent, scalable, chromatography-free synthesis for 2i mesylate was developed to support further clinical evaluation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Automated Reporting of DXA Studies Using a Custom-Built Computer Program.

Science.gov (United States)

England, Joseph R; Colletti, Patrick M

2018-06-01

Dual-energy x-ray absorptiometry (DXA) scans are a critical population health tool and relatively simple to interpret but can be time consuming to report, often requiring manual transfer of bone mineral density and associated statistics into commercially available dictation systems. We describe here a custom-built computer program for automated reporting of DXA scans using Pydicom, an open-source package built in the Python computer language, and regular expressions to mine DICOM tags for patient information and bone mineral density statistics. This program, easy to emulate by any novice computer programmer, has doubled our efficiency at reporting DXA scans and has eliminated dictation errors.

Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report for D19-0, D3-100, and D12-XXX Series Standards

Science.gov (United States)

2015-05-20

Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report For D19-0, D3-100, and D12- XXX Series Standards NF...Candidate Type D19-0 ICP-AES Results ..................................................................... 4 Table V. Candidate Type D12- XXX ...Physical Property Results .................................................. 5 Table VI. Candidate Type D12- XXX Rotrode-AES Results

A low power x-ray tube for use in energy dispersive x-ray fluorescence analysis

International Nuclear Information System (INIS)

Kataria, S.K.; Govil, Rekha; Lal, M.

1980-01-01

A low power X-ray tube with thin molybdenum transmission target for use in energy dispersive X-ray fluorescence (ENDXRF) element analysis has been indigenously built, along with its power supply. The X-ray tube has been in operation since August 1979, and it has been operated upto maximum target voltage of 35 KV and tube current upto 200 μA which is more than sufficient for trace element analysis. This X-ray tube has been used alongwith the indigenously built Si(Li) detector X-ray spectrometer with an energy resolution of 200 eV at 5.9 Kev MnKsub(α) X-ray peak for ENDXRF analysis. A simple procedure of calibration has been developed for thin samples based on the cellulose diluted, thin multielement standard pellets. Analytical sensitivities of the order of a few p.p.m. have been obtained with the experimental setup for elements with 20 < = Z < = 38 and 60 < = Z < = 90. A number of X-ray spectra for samples of environmental, biological, agricultural, industrial and metallurgical interest are presented to demonstrate the salient features of the experimental sep up. (auth.)

Democratizing Authority in the Built Environment

Energy Technology Data Exchange (ETDEWEB)

Andersen, Michael P [UC Berkeley; Kolb, John [UC Berkeley; Chen, Kaifei [UC Berkeley; Culler, David [UC Berkeley; Katz, Randy [UC Berkeley

2017-11-08

Operating systems and applications in the built environment have relied upon central authorization and management mechanisms which restrict their scalability, especially with respect to administrative overhead. We propose a new set of primitives encompassing syndication, security, and service execution that unifies the management of applications and services across the built environment, while enabling participants to individually delegate privilege across multiple administrative domains with no loss of security or manageability. We show how to leverage a decentralized authorization syndication platform to extend the design of building operating systems beyond the single administrative domain of a building. The authorization system leveraged is based on blockchain smart contracts to permit decentralized and democratized delegation of authorization without central trust. Upon this, a publish/subscribe syndication tier and a containerized service execution environment are constructed. Combined, these mechanisms solve problems of delegation, federation, device protection and service execution that arise throughout the built environment. We leverage a high-fidelity city-scale emulation to verify the scalability of the authorization tier, and briefly describe a prototypical democratized operating system for the built environment using this foundation.

Nuclear reactors built, being built, or planned, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1994. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; tables of data for reactors operating, being built, or planned; and tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company -- working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5).

Nuclear reactors built, being built, or planned: 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-08-01

This report contains unclassified information about facilities built, being built, or planned in the US for domestic use or export as of December 31, 1995. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company--working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5).

Nuclear reactors built, being built, or planned, 1994

International Nuclear Information System (INIS)

1995-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1994. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; tables of data for reactors operating, being built, or planned; and tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company -- working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5)

Nuclear reactors built, being built, or planned: 1995

International Nuclear Information System (INIS)

1996-08-01

This report contains unclassified information about facilities built, being built, or planned in the US for domestic use or export as of December 31, 1995. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company--working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5)

The effect of the polymerization initiator and light source on the elution of residual Bis-GMA and TEGDMA monomers: A study using liquid chromatography with UV detection.

Science.gov (United States)

Denis, Aline B; Diagone, Cristina A; Plepis, Ana M G; Viana, Rommel B

2015-12-05

A method for the extraction and quantification of two residual monomers, bisphenol glycidyl dimethacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA), that were evaluated using high efficiency liquid chromatography with UV detection was developed and validated in this study. Three types of solvents were applied in the extraction of the monomers (methanol, ethanol and acetonitrile), where the highest extraction efficiency was obtained using acetonitrile. The different resins were prepared by photoactivation of Bis-GMA and TEGDMA monomers. Additionally, the effects of the addition of two photoinitiators (camphorquinone (CQ) and phenyl propanodione (PPD) and that of a co-initiator (N,N-dimethyl-p-toluidine) were also analyzed. When only the CQ photoinitiator was used, a smaller amount of residual monomers was obtained, whereas a larger amount was obtained with PPD. When the two photoinitiators were used in the same matrix, however, no significant changes were observed in relation to the amount of residual TEGDMA monomers. For the addition of the co-initiator, there were no large changes in the extraction of residual monomers. The effect of the two photoactivation sources (halogen lamp and LED) led to small differences in the elution of the two monomers, although all of the resins differed significantly when photoactivated with a LED. Quantum chemical calculations using Density Functional Theory were carried out to characterize several molecular properties of each monomer. Copyright © 2015 Elsevier B.V. All rights reserved.

Doublet III beamline: as-built

International Nuclear Information System (INIS)

Harder, C.R.; Holland, M.M.; Parker, J.W.; Gunn, J.; Resnick, L.

1980-03-01

In order to fully exploit Doublet III capabilities and to study new plasma physics regimes, a Neutral Beam Injector System has been constructed. Initially, a two beamline system will supply 7 MW of heat to the plasma. The system is currently being expanded to inject approx. 20 MW of power (6 beamlines). Each beamline is equipped with two Lawrence Berkeley Laboratory type rectangular ion sources with 10 cm x 40 cm extraction grids. These sources will accelerate hydrogen ions to 80 keV, with extracted beam currents in excess of 80 A per source expected. The first completed source is currently being tested and conditioned on the High Voltage Test Stand at Lawrence Livermore Laboratory. This paper pictorially reviews the as-built Doublet III neutral beamline with emphasis on component relation and configuration relative to spatial and source imposed design constraints

26 CFR 1.1374-2 - Net recognized built-in gain.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 11 2010-04-01 2010-04-01 true Net recognized built-in gain. 1.1374-2 Section 1...-in gain. (a) In general. An S corporation's net recognized built-in gain for any taxable year is the... considering only its recognized built-in gain, recognized built-in loss, and recognized built-in gain...

Purpose-built mosques in Copenhagen

DEFF Research Database (Denmark)

Neergaard, Maja de; Koefoed, Lasse Martin; Simonsen, Kirsten

2017-01-01

form and the location of the mosques. In the paper we explore both similarities and differences in the way the material culture of the mosques are planned and received by the public. Today, three purpose-built mosques exist in the Copenhagen area, and they differ in terms of architectural form, age...... of purpose-built mosques in Copenhagen. The public visibility is a manifestation of religious differences that cannot be thought independent of the materiality of culture; namely aesthetic forms, dress codes and architectural genres. Cultural encounters are mediated through the materiality, the aesthetic...... are received in public, how this reception varies, and what lessons that can be learned from these meetings as regards possibilities/limitations for, and co-existence in, the city....

Syntheses of amine-type adsorbents with emulsion graft polymerization of glycidyl methacrylate

International Nuclear Information System (INIS)

Seko, N.; Bang, L.T.; Tamada, M.

2007-01-01

Glycidyl methacrylate (GMA) which was precursor monomer for the synthesis of metal ion adsorbent was emulsified by surfactant of Tween 20 (Tw-20). The emulsion of 5% GMA in the water was stable for 48 h at Tw-20 concentration of 0.5%. Graft polymerization of GMA on polyethylene fiber was carried out in the emulsion state at various pre-irradiation doses. Degree of grafting (Dg) reached 103%, 301% and 348% for 1 h grafting at 40 deg. C with pre-irradiation of 10, 30 and 40 kGy, respectively. But the Dg was depressed when the pre-irradiation dose was over 50 kGy since cross-linking occurred simultaneously in the trunk polymer. Dg decreased with increment of Tw-20 concentration in emulsion of 5% GMA at pre-irradiation of 40 kGy. The three kinds of amine-type adsorbents were synthesized by reacting diethylenetriamine (DETA), triethylenetetramine (TETA) and ethylenediamine (EDA) with GMA-grafted polyethylene fiber. The synthesized EDA-type adsorbent had the highest selectivity against U ion and the distribution coefficient was 2.0 x 10 6

Facile synthesis of Zn-doped SnO{sub 2} dendrite-built hierarchical cube-like architectures and their application in lithium storage

Energy Technology Data Exchange (ETDEWEB)

Jia, Tiekun, E-mail: tiekunjia@126.com [Department of Materials Science and Engineering, Luoyang Institute of Science and Technology, Luoyang 471023 (China); Chen, Jian [Department of Materials Science and Engineering, Luoyang Institute of Science and Technology, Luoyang 471023 (China); Deng, Zhao [State Key Lab of Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 (China); Fu, Fang; Zhao, Junwei; Wang, Xiaofeng [Department of Materials Science and Engineering, Luoyang Institute of Science and Technology, Luoyang 471023 (China); Long, Fei [School of Materials Science and Engineering, Guilin University of Technology, Guilin 541004 (China)

2014-11-15

Highlights: • Novel Zn-doped SnO{sub 2} dendrite-built hierarchical cube-like architectures were synthesized via a facile hydrothermal approach without surfactant. • The Zn-doped SnO{sub 2} dendrite-built hierarchical cube-like architectures were assembled by pronounced needle-like nanorod truncks with highly ordered needle-like nanorod branches. • The as-obtained Zn-doped SnO{sub 2} sample exhibited good electrochemical property. - Abstract: Zn-doped SnO{sub 2} dendrite-built hierarchical cube-like architectures were successfully synthesized by a facile hydrothermal approach without the use of any surfactants or templates. The as-prepared samples were characterized by the X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. The observation of FESEM and HRTEM showed that Zn-doped SnO{sub 2} hierarchical cube-like architectures were composed of numerous oriented dendrites. Each dendrite is assembled by a pronounced trunk with highly ordered branches distributing on the both sides. The as-prepared Zn-doped SnO{sub 2} dendrite-built hierarchical cube-like architectures were used as anode materials for Li-ion battery, and a stable capacity of 488.3 mA h g{sup −1} was achieved after 50 cycles. The results of electrochemical measurements indicated that the as-prepared Zn-doped SnO{sub 2} dendrite-built hierarchical cube-like architectures have potential application in Li-ion battery.

Built environment and diabetes

Science.gov (United States)

Pasala, Sudhir Kumar; Rao, Allam Appa; Sridhar, G. R.

2010-01-01

Development of type 2 diabetes mellitus is influenced by built environment, which is, ‘the environments that are modified by humans, including homes, schools, workplaces, highways, urban sprawls, accessibility to amenities, leisure, and pollution.’ Built environment contributes to diabetes through access to physical activity and through stress, by affecting the sleep cycle. With globalization, there is a possibility that western environmental models may be replicated in developing countries such as India, where the underlying genetic predisposition makes them particularly susceptible to diabetes. Here we review published information on the relationship between built environment and diabetes, so that appropriate modifications can be incorporated to reduce the risk of developing diabetes mellitus. PMID:20535308

Advances in X-Ray Simulator Technology

Science.gov (United States)

1995-07-01

d’Etudes de Gramat ; I. Vitkovitsky, Logicon RDA INTRODUCTION DNA’s future x-ray simulators are based upon inductive energy storage, a technology which...switch. SYRINX, a proposed design to be built by the Centre d’Etudes de Gramat (CEG) in France would employ a modular approach, possibly with a...called SYRINX, would be built at the Centred’ Etudes de Gramat (CEG). It would employ a modular.long conduction time current source to drive a PRS

Mass Properties Measurement in the X-38 Project

Science.gov (United States)

Peterson, Wayne L.

2004-01-01

This paper details the techniques used in measuring the mass properties for the X-38 family of test vehicles. The X-38 Project was a NASA internal venture in which a series of test vehicles were built in order to develop a Crew Return Vehicle (CRV) for the International Space Station. Three atmospheric test vehicles and one spaceflight vehicle were built to develop the technologies required for a CRV. The three atmospheric test vehicles have undergone flight-testing by a combined team from the NASA Johnson Space Center and the NASA Dryden Flight Research Center. The flight-testing was performed at Edward's Air Force Base in California. The X-38 test vehicles are based on the X-24A, which flew in the '60s and '70s. Scaled Composites, Inc. of Mojave, California, built the airframes and the vehicles were outfitted at the NASA Johnson Space Center in Houston, Texas. Mass properties measurements on the atmospheric test vehicles included weight and balance by the three-point suspension method, four-point suspension method, three load cells on jackstands, and on three in-ground platform scales. Inertia measurements were performed as well in which Ixx, Iyy, Izz, and Ixz were obtained. This paper describes each technique and the relative merits of each. The proposed measurement methods for an X-38 spaceflight test vehicle will also be discussed. This vehicle had different measurement challenges, but integrated vehicle measurements were never conducted. The spaceflight test vehicle was also developed by NASA and was scheduled to fly on the Space Shuttle before the project was cancelled.

Hydrostatic Pressure and Built-In Electric Field Effects on the Donor Impurity States in Cylindrical Wurtzite GaN/AlxGa1−xN Quantum Rings

Directory of Open Access Journals (Sweden)

Guangxin Wang

2015-01-01

Full Text Available Within the framework of the effective mass approximation, the ground-state binding energy of a hydrogenic impurity is investigated in cylindrical wurtzite GaN/AlxGa1-xN strained quantum ring (QR by means of a variational approach, considering the influence of the applied hydrostatic pressure along the QR growth direction and the strong built-in electric field (BEF due to the piezoelectricity and spontaneous polarization. Numerical results show that the donor binding energy for a central impurity increases inchmeal firstly as the QR radial thickness (ΔR decreases gradually and then begins to drop quickly. In addition, the donor binding energy is an increasing (a decreasing function of the inner radius (height. It is also found that the donor binding energy increases almost linearly with the increment of the applied hydrostatic pressure. Moreover, we also found that impurity positions have an important influence on the donor binding energy. The physical reasons have been analyzed in detail.

Modification of flax fibres by radiation induced emulsion graft copolymerization of glycidyl methacrylate

International Nuclear Information System (INIS)

Moawia, Rihab Musaad; Nasef, Mohamed Mahmoud; Mohamed, Nor Hasimah; Ripin, Adnan

2016-01-01

Flax fibres were modified by radiation induced graft copolymerization of glycidyl methacrylate (GMA) by pre-irradiation method in an emulsion medium. The effect of reaction parameters on the degree of grafting (DOG) such as concentration of bleaching agent, absorbed dose, monomer concentration, temperature and reaction time were investigated. The DOG was found to be dependent on the investigated parameters. The incorporation of poly(GMA) grafts in the bleached flax fibres was confirmed by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The structural and mechanical changes were evaluated by X-ray diffraction (XRD) and mechanical tester, respectively. The results revealed that reacting bleached flax fibres irradiated with 20 kGy with 5% GMA emulsion containing 0.5% polyoxyethylene-sorbitan monolaurate (Tween 20) surfactant at 40 °C for 1 h led to a maximum DOG of 148%. The grafted fibres showed sufficient mechanical strength and hydrophobicity which make them promising precursors for development of adsorbents after appropriate chemical treatments. - Highlights: • Flax fibers were modified by radiation induced emulsion grafting of GMA. • Bleaching with 0.7 wt% Na-chlorite was essential for achieving high DOGs. • Effect of reaction parameters on the degree of grafting were established. • The incorporation of poly-GMA grafts was proved by SEM, FTIR and XRD. • The obtained poly-GMA grafted flax fibers have potential for adsorbent making.

Book Review: Leadership and Sustainability in the Built Environment

OpenAIRE

Elmualim, Abbas

2015-01-01

Leadership and Sustainability in the Built Environment Opoku, A. and Ahmed, V. (ed.), 2015. Leadership and Sustainability in the Built Environment. Routledge, London. ISBN (hbk): 978-1-13-877842-9, Hardback: $155.00.

26 CFR 1.1374-3 - Net unrealized built-in gain.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 11 2010-04-01 2010-04-01 true Net unrealized built-in gain. 1.1374-3 Section 1...-in gain. (a) In general. An S corporation's net unrealized built-in gain is the total of the... unrealized built-in gain—(1) In general. If section 1374(d)(8) applies to an S corporation's acquisition of...

X Python reference manual

NARCIS (Netherlands)

K.S. Mullender (Sjoerd)

1995-01-01

textabstractThis document describes the built-in types, exceptions, and functions of the X windows extension to Python. It assumes basic knowledge about the Python language and access to the X windows documentation. For an informal introduction to the language, see the Python Tutorial. The Python

Research highlights in energy and eco-efficient built environment

Energy Technology Data Exchange (ETDEWEB)

Airaksinen, M. (ed.)

2012-06-15

This publication presents a compilation of VTT's recent research on energy and eco-efficient built environment. Sustainability as a dominating driver of technology development can also be seen in the R and D portfolio of VTT Technical Research Centre of Finland. A clear focus of our research for the building sector is sustainable construction, particularly the energy efficiency of the built environment. Buildings and the whole built environment are in a key role when societies are mitigating climate change and adapting to its consequences. Despite the temporary economic downturn, construction globally remains one of the most significant areas of human activities globally. Due to the urgency of measures related to climate change and the need to provide a proper environment for living and working, a large number of national and international measures have been agreed to guarantee the future development of sustainable built environment for all. Indirectly, this has lead to a need to develop existing and completely new technologies and processes for the built environment with a speed faster than ever and with a more holistic performance metrics than ever.

Transparent dispersion compensator with built-in gain equalizer

DEFF Research Database (Denmark)

Rottwitt, Karsten; Doerr, C.

2002-01-01

In this work we describe a method to obtain a transparent or even an amplifying dispersion compensating module with built-in gain equalization functionality. The principle of operation and experimental results are illustrated.......In this work we describe a method to obtain a transparent or even an amplifying dispersion compensating module with built-in gain equalization functionality. The principle of operation and experimental results are illustrated....

Durchführung der universitären Prüfungen im klinischen Abschnitt des Medizinstudiums nach den Leitlinien des GMA-Ausschusses Prüfungen: Eine Bestandsaufnahme der medizinischen Fakultäten in Baden-Württemberg [Implementation of assessments according to the guidelines of the GMA: A survey of the medical faculties in Baden-Württemberg

Directory of Open Access Journals (Sweden)

Jünger, Jana

2010-08-01

Full Text Available [english] With the introduction of the new medical licensing regulation [1] in 2002, a reform process was initiated nationwide that aimed to redesign medical degree programs at universities to make them more practice-oriented and to establish quality assurance in teaching. Five centers of excellence were set up at the medical schools in Baden-Württemberg that merged to form the Network for Excellence in Medical Education.The Network for Excellence in Medical Education carried out a survey among the five medical schools in Baden-Württemberg on the implementation of the requirements set down in the GMA guidelines for university-specific, high-quality assessments during the clinical phase of medical studies. The network’s next steps for improving the quality of assessments at medical schools were prioritized in order to determine the urgency of support to be given to Baden-Württemberg’s faculties of medicine in implementing the GMA requirements.It became apparent that essential parts of the requirements formulated in the guidelines had already been fulfilled or at least could be fulfilled in the near future. It was observed that establishing structured review processes during assessment preparation and in particular the follow-up presented considerable difficulties. A focus group analysis identified the following objectives for the network: supporting medical schools in their review processes; compiling a comprehensive assessment program and assessment reports with statistical analysis. Training the people responsible for assessment is another priority.The results largely correspond to those from a similar survey carried out among medical schools in Bavaria and show that organizational structures, such as those that have been established in the centers of excellence in education and assessment in Baden-Württemberg and Bavaria, can offer essential support in the quality assurance of assessment.[german] Mit der Einführung der novellierten �

Design and management of sustainable built environments

CERN Document Server

2013-01-01

Climate change is believed to be a great challenge to built environment professionals in design and management. An integrated approach in delivering a sustainable built environment is desired by the built environment professional institutions. The aim of this book is to provide an advanced understanding of the key subjects required for the design and management of modern built environments to meet carbon emission reduction targets. In Design and Management of Sustainable Built Environments, an international group of experts provide comprehensive and the most up-to-date knowledge, covering sustainable urban and building design, management and assessment. The best practice case studies of the implementation of sustainable technology and management from the BRE Innovation Park are included. Design and Management of Sustainable Built Environments will be of interest to urban and building designers, environmental engineers, and building performance assessors.  It will be particularly useful as a reference book ...

Core Competencies for Medical Teachers (KLM) – A Position Paper of the GMA Committee on Personal and Organizational Development in Teaching

Science.gov (United States)

Görlitz, Anja; Ebert, Thomas; Bauer, Daniel; Grasl, Matthäus; Hofer, Matthias; Lammerding-Köppel, Maria; Fabry, Götz

2015-01-01

Recent developments in medical education have created increasing challenges for medical teachers which is why the majority of German medical schools already offer educational and instructional skills trainings for their teaching staff. However, to date no framework for educational core competencies for medical teachers exists that might serve as guidance for the qualification of the teaching faculty. Against the background of the discussion about competency based medical education and based upon the international literature, the GMA Committee for Faculty and Organizational Development in Teaching developed a model of core teaching competencies for medical teachers. This framework is designed not only to provide guidance with regard to individual qualification profiles but also to support further advancement of the content, training formats and evaluation of faculty development initiatives and thus, to establish uniform quality criteria for such initiatives in German-speaking medical schools. The model comprises a framework of six competency fields, subdivided into competency components and learning objectives. Additional examples of their use in medical teaching scenarios illustrate and clarify each specific teaching competency. The model has been designed for routine application in medical schools and is thought to be complemented consecutively by additional competencies for teachers with special duties and responsibilities in a future step. PMID:26038688

Modular Zero Energy. BrightBuilt Home

Energy Technology Data Exchange (ETDEWEB)

Aldrich, Robb [Steven Winter Associates, Inc., Norwalk, CT (United States); Butterfield, Karla [Steven Winter Associates, Inc., Norwalk, CT (United States)

2016-03-01

With funding from the Building America Program, part of the U.S. Department of Energy Building Technologies Office, the Consortium for Advanced Residential Buildings (CARB) worked with BrightBuilt Home (BBH) to evaluate and optimize building systems. CARB’s work focused on a home built by Black Bros. Builders in Lincolnville, Maine (International Energy Conservation Code Climate Zone 6). As with most BBH projects to date, modular boxes were built by Keiser Homes in Oxford, Maine.

Common mental disorders and the built environment in Santiago, Chile.

Science.gov (United States)

Araya, Ricardo; Montgomery, Alan; Rojas, Graciela; Fritsch, Rosemarie; Solis, Jaime; Signorelli, Andres; Lewis, Glyn

2007-05-01

There is growing research interest in the influence of the built environment on mental disorders. To estimate the variation in the prevalence of common mental disorders attributable to individuals and the built environment of geographical sectors where they live. A sample of 3870 adults (response rate 90%) clustered in 248 geographical sectors participated in a household cross-sectional survey in Santiago, Chile. Independently rated contextual measures of the built environment were obtained. The Clinical Interview Schedule was used to estimate the prevalence of common mental disorders. There was a significant association between the quality of the built environment of small geographical sectors and the presence of common mental disorders among its residents. The better the quality of the built environment, the lower the scores for psychiatric symptoms; however, only a small proportion of the variation in common mental disorder existed at sector level, after adjusting for individual factors. Findings from our study, using a contextual assessment of the quality of the built environment and multilevel modelling in the analysis, suggest these associations may be more marked in non-Western settings with more homogeneous geographical sectors.

Built environmental correlates of physical activity in China: A review.

Science.gov (United States)

Day, Kristen

2016-06-01

China faces growing levels of physical inactivity and obesity, associated with increasing urbanization and changing lifestyles in recent years. China is expanding its cities to accommodate a growing urban population. This paper identifies built environment factors that are associated with physical activity in China. Findings can inform urban design and development in China to support increased physical activity. This paper is modeled on a review of built environment correlates of walking by Saelens and Handy (2008). Saelens and Handy reviewed research in developed countries. The present paper reviews 42 empirical studies that were conducted in China and were published between 2006 and 2014. Results discuss the association of built environment features and physical activity for transportation, recreation and work. Studies focus on adults and on major cities. Data on the built environment is typically self-reported. Strongest evidence was found for the positive association of physical activity with proximal non-residential locations, pedestrian infrastructure, aesthetics, and non-park physical activity facilities, and for the negative association of physical activity with urban residence. In terms of physical activity for transportation, evidence is strongest for associations between physical activity for transportation and proximal non-residential locations. More research is needed on the built environment and physical activity, especially including research on significant features of Chinese cities, such as air pollution, high density levels, traffic safety, and others. Research on associations between built environment features and physical activity should consider the specific social and built environment contexts of Chinese cities.

Structure/property relationships in multipass GMA welding of beryllium.

Energy Technology Data Exchange (ETDEWEB)

Hochanadel, P. W. (Patrick W.); Hults, W. L. (William L.); Thoma, D. J. (Dan J.); Dave, V. R. (Vivek R.); Kelly, A. M. (Anna Marie); Pappin, P. A. (Pallas A.); Cola, M. J. (Mark J.); Burgardt, P. (Paul)

2001-01-01

Beryllium is an interesting metal that has a strength to weight ratio six times that of steel. Because of its unique mechanical properties, beryllium is used in aerospace applications such as satellites. In addition, beryllium is also used in x-ray windows because it is nearly transparent to x-rays. Joining of beryllium has been studied for decades (Ref.l). Typically joining processes include braze-welding (either with gas tungsten arc or gas metal arc), soldering, brazing, and electron beam welding. Cracking which resulted from electron beam welding was recently studied to provide structure/property relationships in autogenous welds (Ref. 2). Braze-welding utilizes a welding arc to melt filler, and only a small amount of base metal is melted and incorporated into the weld pool. Very little has been done to characterize the braze-weld in terms of the structure/property relationships, especially with reference to multipass welding. Thus, this investigation was undertaken to evaluate the effects of multiple passes on microstructure, weld metal composition, and resulting material properties for beryllium welded with aluminum-silicon filler metal.

Greening the built environment

Energy Technology Data Exchange (ETDEWEB)

Smith, Maf; Whitelegg, John; Williams, Nick J.

1998-07-15

The built environment incorporates our homes, our workplaces and places of leisure. Under the influence of a complex web of social and economic processes, it is where many issues of human and environmental well-being come to a head - whether of space, mobility, energy consumption, pollution, health or security. All too often, concerns such as cost are put before the things we value for a fulfilling life, including peace and quiet and health and happiness. Getting the built environment right is fundamental to a sustainable society and requires an integrated approach. This important new book, published in association with the World Wide Fund For Nature (WWF-UK), provides us with a firm understanding of the interrelationships of many of the issues and problems of the built environment and describes the holistic models of development, management and planning necessary for urban sustainability. It draws attention to the major challenges and policy implications and offers analysis, approaches and vision for moving towards sustainable towns and cities that in turn will facilitate sustainable lifestyles. (Author)

Influence of compatibilizer and/or montmorillonite addition on the mechanical properties and morphology of PP/recycled PET blends

International Nuclear Information System (INIS)

Silva, Murilo S.; Souza, Adriana M.C.

2011-01-01

In this work, the mechanical properties and morphology PP/recycled PET blends with addition of P(E-co-MA-co-GMA) copolymer and/or montmorillonite clay (MMT) was investigated. The blends were obtained by extrusion and their morphology was observed by scanning electron microscopy. The mechanical properties were evaluated by tensile and impact tests. Thin films of nanocomposites were characterized by x-ray diffraction (XRD). The addition of P (E-co-MA-co-GMA) or MMT clay separately promoted a decrease of the dispersed phase size. XRD analysis indicated that there was incorporation of polymer in clay galleries. The addition of clay in PP / PET blend resulted in an increase of apparent elastic modulus, impact resistance and HDT and a decrease of tensile strength and elongation at break. The addition of P (E-co-MA-co-GMA) resulted in an increased impact strength and reduction of other properties. There were no significant changes on mechanical properties when the clay and P (E-co-MA-co-GMA) are added simultaneously. (author)

Gas Sensors Built with Nanomaterials and Provided with a Heating Double Purpose Hot-plate

Directory of Open Access Journals (Sweden)

Cristian L. ARRIETA

2017-01-01

Full Text Available Pure or doped SnO2, has been used to build resistive type gas sensors from several decades. This subject has been retaken using pure or doped nanocrystalline SnO2 to build the sensors, finding considerable advantages in devices performance. The sensors working temperature (Tw decreases from (350-450 0C to (180-200 0C in comparison with that of devices built with microcrystalline conventional material. Sensitivity of sensors built with nanocrystalline material in comparison with that of devices built with conventional microcrystalline material, increases from 30 % to 37 %. In this work, SnO2 is synthesized using two different modified techniques based on gel-combustion and reactive oxidation and results of both syntheses are compared. Nanomaterials are characterised with X-ray diffraction (XRD, High Resolution Transmission Electron Microscopy (HRTEM and Field Emission Electron Scanning Microscopy (FESEM and absorption techniques (BET. An electronic system, already patented by the authors, enables to alternatively measure the sensor resistivity (which is proportional to the adsorbed gas concentration and set a constant working temperature, thus contributing to considerably save energy.

NaF-loaded core-shell PAN-PMMA nanofibers as reinforcements for Bis-GMA/TEGDMA restorative resins.

Science.gov (United States)

Cheng, Liyuan; Zhou, Xuegang; Zhong, Hong; Deng, Xuliang; Cai, Qing; Yang, Xiaoping

2014-01-01

A kind of core-shell nanofibers containing sodium fluoride (NaF) was produced and used as reinforcing materials for dimethacrylate-based dental restorative resins in this study. The core-shell nanofibers were prepared by coaxial-electrospinning with polyacrylonitrile (PAN) and poly(methyl methacrylate) (PMMA) solutions as core and shell fluids, respectively. The produced PAN-PMMA nanofibers varied in fiber diameter and the thickness of PMMA shell depending on electrospinning parameters. NaF-loaded nanofibers were obtained by incorporating NaF nanocrystals into the core fluid at two loadings (0.8 or 1.0wt.%). Embedment of NaF nanocrystals into the PAN core did not damage the core-shell structure. The addition of PAN-PMMA nanofibers into Bis-GMA/TEGDMA clearly showed the reinforcement due to the good interfacial adhesion between fibers and resin. The flexural strength (Fs) and flexural modulus (Ey) of the composites decreased slightly as the thickness of PMMA shell increasing. Sustained fluoride releases with minor initial burst release were achieved from NaF-loaded core-shell nanofibers and the corresponding composites, which was quite different from the case of embedding NaF nanocrystals into the dental resin directly. The study demonstrated that NaF-loaded PAN-PMMA core-shell nanofibers were not only able to improve the mechanical properties of restorative resin, but also able to provide sustained fluoride release to help in preventing secondary caries. © 2013.

JEM-X: Joint European X-ray monitor

DEFF Research Database (Denmark)

Lund, Niels; Westergaard, Niels Jørgen Stenfeldt; Budtz-Jørgensen, Carl

1998-01-01

JEM-X is the X-ray monitor for INTEGRAL. It is being built by a large European consortium led by the Danish Space Research Institute. It consists of two identical, independent coded mask X-ray telescopes with an energy span from 3 keV to 60 keV. Each system has a microstrip gas detector and a mask...... with a 25% transparent hexagonal uniformly redundant pattern based on a bi-quadratic residue set situated 3.4 m above the detector. The fully illuminated field-of-view is circular and 4.8 degrees across. The mechanical properties and source detection sensitivities are reviewed....

Studies on novel radiopaque methyl methacrylate: glycidyl methacrylate based polymer for biomedical applications.

Science.gov (United States)

Dawlee, S; Jayakrishnan, A; Jayabalan, M

2009-12-01

A new class of radiopaque copolymer using methyl methacrylate (MMA) and glycidyl methacrylate (GMA) monomers was synthesized and characterized. The copolymer was made radiopaque by the epoxide ring opening of GMA using the catalyst o-phenylenediamine and the subsequent covalent attachment of elemental iodine. The copolymer was characterized by Fourier transform infrared (FTIR) spectra, energy dispersive X-ray analysis using environmental scanning electron microscope (EDAX), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). X-ray visibility of the copolymer was checked by X-radiography. Blood compatibility and cytotoxicity of the newly synthesized copolymer were also evaluated. The iodinated copolymer was thermally stable, blood compatible, non-cytotoxic, and highly radiopaque. The presence of bulky iodine group created a new copolymer with modified properties for potential use in biomedical applications.

Analysis of ISO/IEEE 11073 built-in security and its potential IHE-based extensibility.

Science.gov (United States)

Rubio, Óscar J; Trigo, Jesús D; Alesanco, Álvaro; Serrano, Luis; García, José

2016-04-01

The ISO/IEEE 11073 standard for Personal Health Devices (X73PHD) aims to ensure interoperability between Personal Health Devices and aggregators-e.g. health appliances, routers-in ambulatory setups. The Integrating the Healthcare Enterprise (IHE) initiative promotes the coordinated use of different standards in healthcare systems (e.g. Personal/Electronic Health Records, alert managers, Clinical Decision Support Systems) by defining profiles intended for medical use cases. X73PHD provides a robust syntactic model and a comprehensive terminology, but it places limited emphasis on security and on interoperability with IHE-compliant systems and frameworks. However, the implementation of eHealth/mHealth applications in environments such as health and fitness monitoring, independent living and disease management (i.e. the X73PHD domains) increasingly requires features such as secure connections to mobile aggregators-e.g. smartphones, tablets-, the sharing of devices among different users with privacy, and interoperability with certain IHE-compliant healthcare systems. This work proposes a comprehensive IHE-based X73PHD extension consisting of additive layers adapted to different eHealth/mHealth applications, after having analyzed the features of X73PHD (especially its built-in security), IHE profiles related with these applications and other research works. Both the new features proposed for each layer and the procedures to support them have been carefully chosen to minimize the impact on X73PHD, on its architecture (in terms of delays and overhead) and on its framework. Such implications are thoroughly analyzed in this paper. As a result, an extended model of X73PHD is proposed, preserving its essential features while extending them with added value. Copyright © 2016 Elsevier Inc. All rights reserved.

A high resolution position sensitive X-ray MWPC for small angle X-ray diffraction

International Nuclear Information System (INIS)

Bateman, J.E.; Connolly, J.F.; Stephenson, R.; Tappern, G.J.

1981-02-01

A small sealed-off delay line readout MWPC X-ray detector has been designed and built for small angle X-ray diffraction applications. Featuring a sensitive area of 100 mm x 25 mm it yields a spatial resolution of 0.13 mm (standard deviation) with a high rate capability and good quantum efficiency for copper K radiation. (author)

The full automation of a Philips 1220 x-ray spectrometer

International Nuclear Information System (INIS)

Austen, C.E.

1976-01-01

A Philips 1220 X-ray spectrometer (semi-automatic) was fully automated by the addition of a custom-built automatic sample-loader constructed at the National Institute for Metallurgy and a Texas 980 A mini-computer. The mini-computer was interfaced to the existing control circuits of the X-ray spectrometer through a custom-built logic-circuit unit that controls the automatic sample-loader and X-ray spectrometer on instructions received from the mini-computer. The controlling software is written in BASIC

In-situ calibration of clinical built-in KAP meters with traceability to a primary standard using a reference KAP meter.

Science.gov (United States)

Malusek, A; Helmrot, E; Sandborg, M; Grindborg, J-E; Carlsson, G Alm

2014-12-07

The air kerma-area product (KAP) is used for settings of diagnostic reference levels. The International Atomic Energy Agency (IAEA) recommends that doses in diagnostic radiology (including the KAP values) be estimated with an accuracy of at least ± 7% (k = 2). Industry standards defined by the International Electrotechnical Commission (IEC) specify that the uncertainty of KAP meter measurements should be less than ± 25% (k = 2). Medical physicists willing to comply with the IAEA's recommendation need to apply correction factors to KAP values reported by x-ray units. The aim of this work is to present and evaluate a calibration method for built-in KAP meters on clinical x-ray units. The method is based on (i) a tandem calibration method, which uses a reference KAP meter calibrated to measure the incident radiation, (ii) measurements using an energy-independent ionization chamber to correct for the energy dependence of the reference KAP meter, and (iii) Monte Carlo simulations of the beam quality correction factors that correct for differences between beam qualities at a standard laboratory and the clinic. The method was applied to the KAP meter in a Siemens Aristos FX plus unit. It was found that values reported by the built-in KAP meter differed from the more accurate values measured by the reference KAP meter by more than 25% for high tube voltages (more than 140 kV) and heavily filtered beams (0.3 mm Cu). Associated uncertainties were too high to claim that the IEC's limit of 25% was exceeded. Nevertheless the differences were high enough to justify the need for a more accurate calibration of built-in KAP meters.

Concentrated solar power in the built environment

Science.gov (United States)

Montenon, Alaric C.; Fylaktos, Nestor; Montagnino, Fabio; Paredes, Filippo; Papanicolas, Costas N.

2017-06-01

Solar concentration systems are usually deployed in large open spaces for electricity generation; they are rarely used to address the pressing energy needs of the built environment sector. Fresnel technology offers interesting and challenging CSP energy pathways suitable for the built environment, due to its relatively light weight (Heating, Ventilation, and Air Conditioning) system of a recently constructed office & laboratory building, the Novel Technologies Laboratory (NTL). The multi-generative system will support cooling, heating and hot water production feeding the system of the NTL building, as a demonstration project, part of the STS-MED program (Small Scale Thermal Solar District Units for Mediterranean Communities) financed by the European Commission under the European Neighbourhood and Partnership Instrument (ENPI), CBCMED program.

Design and Tests of the Hard X-ray Polarimeter X-Calibur

Directory of Open Access Journals (Sweden)

M. Beilicke

2014-12-01

Full Text Available X-ray polarimetry promises to give qualitatively new information bout high-energy astrophysical sources, such as binary black hole  systems, micro-quasars, active galactic nuclei, and gamma-ray bursts. We designed, built and tested ahard X-ray polarimeter, X-Calibur, to be used in the focal plane of the InFOCuS grazing incidence hard X-ray telescope.X-Calibur combines a low-Z Compton scatterer with a CZT detector assembly to measure the polarization of 20−60 keV X-rays making use of the fact that polarized photons Compton scatter preferentially perpendicular to the electric field orientation; in principal, a similar space-borne experiment could be operated in the 5−100 keV regime. X-Calibur achieves a high detection efficiency of order unity.

Search for Pentaquarks in the Hadronic Decays of the Z Boson with the DELPHI Detector at LEP

CERN Document Server

Abdallah, J; Adam, W; Adzic, P; Albrecht, T; Alemany-Fernandez, R; Allmendinger, T; Allport, P P; Amaldi, Ugo; Amapane, N; Amato, S; Anashkin, E; Andreazza, A; Andringa, S; Anjos, N; Antilogus, P; Apel, W D; Arnoud, Y; Ask, S; Åsman, B; Augustin, J E; Augustinus, A; Baillon, P; Ballestrero, A; Bambade, P; Barbier, R; Bardin, D; Barker, G J; Baroncelli, A; Battaglia, M; Baubillier, M; Becks, K H; Begalli, M; Behrmann, A; Ben-Haim, E; Benekos, N; Benvenuti, A; Bérat, C; Berggren, M; Bertrand, D; Besançon, M; Besson, N; Bloch, D; Blom, M; Bluj, M; Bonesini, M; Boonekamp, M; Booth, P S L; Borisov, G; Botner, O; Bouquet, B; Bowcock, T J V; Boyko, I; Bracko, M; Brenner, R; Brodet, E; Brückman, P; Brunet, J M; Buschbeck, B; Buschmann58, P; Calvi, M; Camporesi, T; Canale, V; Carena, F; Castro, N; Cavallo, F; Chapkin, M; Charpentier, P; Checchia, P; Chierici, R; Shlyapnikov, P; Chudoba, J; Chung, S U; Cieslik, K; Collins, P; Contri, R; Cosme, G; Cossutti, F; Costa, M J; Crennell, D J; Cuevas-Maestro, J; D'Hondt, J; Da Silva, T; Da Silva, W; Della Ricca, G; De Angelis51, A; de Boer, Wim; De Clercq, C; De Lotto, B; De Maria, N; De Min, A; De Paula, L; Di Ciaccio, L; Di Simone, A; Doroba, K; Drees, J; Eigen, G; Ekelöf, T J C; Ellert, M; Elsing, M; Espirito-Santo, M C; Fanourakis, G K; Fassouliotis, D; Feindt, M; Fernández, J; Ferrer, A; Ferro, F; Flagmeyer, U; Föth, H; Fokitis, E; Fulda-Quenzer, F; Fuster, J; Gandelman, M; García, C; Gavillet, P; Gazis, E; Gokieli, R; Golob, B; Gómez-Ceballos, G; Gonçalves, P; Graziani, E; Grosdidier, G; Grzelak, K; Guy, J; Haag, C; Hallgren, A; Hamacher, K; Hamilton, K; Haug, S; Hauler, F; Hedberg, V; Hennecke1, M; Herr, H; Hoffman, J; Holmgren, S O; Holt, P J; Houlden, M A; Jackson, J N; Jarlskog, G; Jarry, P; Jeans, D; Johansson, E K; Jonsson, P; Joram, C; Jungermann, L; Kapusta, F; Katsanevas, S; Kokkinias, P; Leinonen, L; Katsoufis, E; Kernel, G; Kersevan, B P; Krumshtein, Z; Lesiak, T; Kerzel, U; Liebig, W; King, B T; Lamsa, J; Liko, D; Kjaer, N J; Leder, G; Kluit, P; Kourkoumelis, C; Leitner, R; Kuznetsov, O; Kucharczyk, M; Ledroit, F; Lopes, J H; Lemonne, J; Lepeltier, V; Lipniacka, A; López, J M; Loukas, D; Lutz, P; Lyons, L; MacNaughton, J; Malek, A; Maltezos, S; Mandl, F; Marco, J; Marco, R; Maréchal, B; Margoni, M; Marin, J C; Mariotti, C; Markou, A; Martínez-Rivero, C; Masik, J; Mastroyiannopoulos, N; Matorras, F; Matteuzzi, C; Mazzucato, F; Mazzucato, M; McNulty, R; Meroni, C; Migliore, E; Mitaroff, W A; Mjörnmark, U; Moa, T; Moch, M; Mönig, K; Monge, R; Montenegro, J; Moraes, D; Moreno, S; Morettini, P; Müller, U; Münich, K; Mulders, M; Mundim, L; Murray, W; Muryn, B; Myatt, G; Myklebust, T; Paganoni, M; Nassiakou, M; Paiano, S; Navarria, F; Nawrocki, K; Nicolaidou, R; Nikolenko, M; Ouraou, A; Parkes, C; Oblakowska-Mucha, A; Oyanguren, A; Obraztsov, V F; Olshevski, A; Palacios, J P; Onofre, A; Palka, H; Orava, R; Österberg, K; Pape, L; Papadopoulou, T D; Parodi, F; Parzefall, U; Passeri, A; Passon, O; Peralta, L; Perepelitsa, V; Perrotta, A; Petrolini, A; Piedra, J; Pieri, L; Pierre, F; Pimenta, M; Piotto, E; Podobnik, T; Poireau, V; Pol, M E; Polok, G; Pozdnyakov, V; Pukhaeva, N; Pullia, A; Rames, J; Read, A; Rebecchi, P; Rehn, J; Reid, D; Reinhardt, R; Renton, P B; Richard, F; Rídky, J; Rivero, M; Rodríguez, D; Romero, A; Ronchese, P; Roudeau, P; Rovelli, T; Ruhlmann-Kleider, V; Ryabtchikov, D; Sadovskii, A; Salmi, L; Salt, J; Sander, C; Savoy-Navarro, A; Schwickerath, U; Sekulin, R; Siebel, M; Sisakian, A; Smadja, G; Smirnova, O; Sokolov, A; Sopczak, A; Sosnowski, R; Spassoff, Tz; Stanitzki, M; Stocchi, A; Strauss, J; Stugu, B; Szczekowski, M; Szeptycka, M; Szumlak, T; Tabarelli de Fatis, T; Tegenfeldt, F; Timmermans, J; Tkatchev, L; Tobin, M; Todorovova, S; Tomé, B; Tonazzo, A; Tortosa, P; Travnicek, P; Treille, D; Tristram, G; Trochimczuk, M; Troncon, C; Turluer, M L; Tyapkin, I A; Tyapkin, P; Tzamarias, S; Uvarov, V; Valenti, G; van Dam, P; Van Eldik, J; Van Remortel, N; Van Vulpen, I; Vegni, G; Veloso, F; Venus, W; Verdier, P; Verzi, V; Vilanova, D; Vitale, L; Vrba, V; Wahlen, H; Washbrook, A J; Weiser, C; Wicke, D; Wickens, J; Wilkinson, G; Winter, M; Witek, M; Yushchenko, O; Zalewska-Bak, A; Zalewski, P; Zavrtanik, D; Zhuravlov, V; Zimin, N I; Zintchenko, A; Zupan, M

2007-01-01

The quark model does not exclude states composed of more than three quarks, like pentaquark systems. Controversial evidence for such states has been published in the last years, in particular: for a strange pentaquark Theta(1540)+; for a double-strange state, the Xi(1862)--, subsequently called Phi(1860)--; and for a charmed state, the Theta_c(3100)^0. If confirmed, a full pentaquark family might exist; such pentaquark states could be produced in e+e- annihilations near the Z energy. In this paper a search for pentaquarks is described using the DELPHI detector at LEP, characterized by powerful particle identification sub-systems crucial in the separation of the signal from the background for these states. At 95% CL, upper limits are set on the production rates of such particles and their charge-conjugate state per Z decay: x Br(Theta+ -> pK0_S) x Br(Phi(1860)-- -> Xi- pi-) x Br(Theta_c(3100)^0 -> D*+ pbar) < 8.8 x 10^{-4} .

Measuring the food and built environments in urban centres

DEFF Research Database (Denmark)

Pomerleau, Joceline; Knai, Cecile; McKee, M

2013-01-01

Objectives: The authors designed an instrument to measure objectively aspects of the built and food environments in urban areas, the EURO-PREVOB Community Questionnaire, within the EU-funded project ‘Tackling the social and economic determinants of nutrition and physical activity for the prevention...... of obesity across Europe’ (EURO-PREVOB). This paper describes its development, reliability, validity, feasibility and relevance to public health and obesity research. Study design: The Community Questionnaire is designed to measure key aspects of the food and built environments in urban areas of varying...... levels of affluence or deprivation, within different countries. The questionnaire assesses (1) the food environment and (2) the built environment. Methods: Pilot tests of the EURO-PREVOB Community Questionnaire were conducted in five to 10 purposively sampled urban areas of different socio...

The Focusing Optics X-ray Solar Imager Small Explorer Concept Mission

Science.gov (United States)

Christe, Steven; Shih, Albert Y.; Dennis, Brian R.; Glesener, Lindsay; Krucker, Sam; Saint-Hilaire, Pascal; Gubarev, Mikhail; Ramsey, Brian

2016-05-01

We present the FOXSI (Focusing Optics X-ray Solar Imager) small explorer (SMEX) concept, a mission dedicated to studying particle acceleration and energy release on the Sun. FOXSI is designed as a 3-axis stabilized spacecraft in low-Earth orbit making use of state-of-the-art grazing incidence focusing optics combined withpixelated solid-state detectors, allowing for direct imaging of solar X-rays. The current design being studied features multiple telescopes with a 14 meter focal length enabled by a deployable boom.FOXSI will observe the Sun in the 3-100 keV energy range. The FOXSI imaging concept has already been tested on two sounding rocket flights, in 2012 and 2014 and on the HEROES balloon payload flight in 2013. FOXSI will image the Sun with an angular resolution of 5'', a spectral resolution of 0.5 keV, and sub-second temporal resolution. FOXSI is a direct imaging spectrometer with high dynamic range and sensitivity and will provide a brand-new perspective on energy release on the Sun. We describe the mission and its science objectives.

Two digital X-ray imaging systems for applications in X-ray diffraction

International Nuclear Information System (INIS)

Bateman, J.E.; Connolly, J.F.; Stephenson, R.; Flesher, A.C.; Tucker, P.A.; Swanton, S.W.

1987-01-01

Two digital X-ray imaging systems developed at the Rutherford Appleton Laboratory are described: the Mark I and the Mark II. Both use a bidimensionally sensitive multiwire proportional counter (MWPC) as the basic X-ray image transducer coupled, in the case of the Mark I to a Digital LSI 11-23 microcomputer system via CAMAC, and in the case of the Mark II to a Digital LSI 11-73 microcomputer system via custom-built data acquisition hardware mounted directly on the Q-bus of the microcomputer. The Mark I system provides the advantages of high speed, high sensitivity digital imaging directly into the computer with the potential for software control of the sample orientation and environment. The Mark II system adds the novel features of signal averaging and multiframe exposures. The dedicated digital memories have a resolution of 512x512 pixels of 16 bits, matching well to the spatial resolution of the xenon-filled MWPC (0.5 mm fwhm over an aperture of 200 mm x 200 mm). A 512x512x4 bit video graphics system displays the images in grey scales or colour. (orig.)

Wind energy in the built environment : Concentrator effects of buildings

NARCIS (Netherlands)

Mertens, S.

2006-01-01

This thesis deals with wind energy conversion in the built environment. It gives a description of the wind resources in the built environment that can be converted into energy by a wind turbine. With a focus on maximum energy yield of the wind turbine, it especially deals with the integration of

Impact factors on expansion of built-up areas in Zhejiang Province, China

Science.gov (United States)

Liu, Dong; Zhu, Qiankun; Li, Yan; Gong, Fang

2017-10-01

Built-up areas are the results of human activities. Not only are they the real reflection of human and society activities, but also one of the most important input parameters for the simulation of biogeochemical cycle. Therefore, it is very necessary to map the distribution of built-up areas and monitor their changes by using new technologies and methods at high spatiotemporal resolution. By combining technologies of GIS (Geographic Information System) and RS (Remote Sensing), this study mainly explored the expansion and driving factors of built-up areas at the beginning of the 21st century in Zhejiang Province, China. Firstly, it introduced the mapping processes of LULC (Land Use and Land Cover) based on the method which combined object-oriented method and binary decision tree. Then, it analyzed the expansion features of built-up areas in Zhejiang from 2000 to 2005 and 2005 to 2010. In addition to these, potential driving factors on the expansion of built-up areas were also explored, which contained physical geographical factors, railways, highways, rivers, urban centers, elevation, and slop. Results revealed that the expansions of built-up areas in Zhejiang from 2000 to 2005 and from 2005 to 2010 were very obvious and they showed high levels of variation in spatial heterogeneity. Except those, increased built-up areas with distance to railways, highways, rivers, and urban centers could be fitted with power function (y = a*xb ), with minimum R2 of 0.9507 for urban centers from 2000 to 2005; the increased permillages of built-up areas to mean elevation and mean slop could be fitted with exponential functions (y = a*ebx), with minimum R2 of 0.6657 for mean slop from 2005 to 2010. Besides, government policy could also impact expansion of built-up areas. In a nutshell, a series of conclusions were obtained through this study about the spatial features and driving factors of evolution of built-up areas in Zhejiang from 2000 to 2010.

CXCR4/CXCL12/CXCR7 axis is functional in neuroendocrine tumors and signals on mTOR.

Science.gov (United States)

Circelli, Luisa; Sciammarella, Concetta; Guadagno, Elia; Tafuto, Salvatore; del Basso de Caro, Marialaura; Botti, Giovanni; Pezzullo, Luciano; Aria, Massimo; Ramundo, Valeria; Tatangelo, Fabiana; Losito, Nunzia Simona; Ieranò, Caterina; D'Alterio, Crescenzo; Izzo, Francesco; Ciliberto, Gennaro; Colao, Annamaria; Faggiano, Antongiulio; Scala, Stefania

2016-04-05

To evaluate the possible crosstalk between C-X-C chemokine receptor 4 (CXCR4)/C-X-C motif chemokine 12 (CXCL12)/C-X-C chemokine receptor 7 (CXCR7) axis with the mammalian target of rapamycin (mTOR) pathway in neuroendocrine tumors (NETs). Sixty-one human NETs were included into the study. CXCR4/CXCL12/CXCR7 axis and mTOR pathway were assessed by qRT-PCR and immunohistochemistry (IHC). The effect of mTOR inhibitor, RAD001, was evaluated on CXCR4 pathway through proliferation and p-Erk and p-AKT induction. CXCR4/CXCL12/CXCR7 axis and p-mTOR were found to be active and correlated with grading, Ki67 index and tumor stage. mTOR pathway activation significantly correlated with poor prognosis. In human NET cells, CXCL12 induced mTOR signalling while AMD3100 (CXCR4-antagonist) impaired it. The mTOR-antagonist, RAD001, impaired the CXCL12-dependent induction of CXCR4 downstream effectors. Combination of AMD3100 and RAD001 potentiate cell growth inhibition. CXCR4/CXCL12/CXCR7 axis is active in NETs and signals on mTOR. CXCR4 might be considered a prognostic factor in NETs. Combined treatment with AMD3100 and RAD001 may provide clinical benefits in NET patients with drug-resistant.

Complexity in built environment, health, and destination walking: a neighborhood-scale analysis.

Science.gov (United States)

Carlson, Cynthia; Aytur, Semra; Gardner, Kevin; Rogers, Shannon

2012-04-01

This study investigates the relationships between the built environment, the physical attributes of the neighborhood, and the residents' perceptions of those attributes. It focuses on destination walking and self-reported health, and does so at the neighborhood scale. The built environment, in particular sidewalks, road connectivity, and proximity of local destinations, correlates with destination walking, and similarly destination walking correlates with physical health. It was found, however, that the built environment and health metrics may not be simply, directly correlated but rather may be correlated through a series of feedback loops that may regulate risk in different ways in different contexts. In particular, evidence for a feedback loop between physical health and destination walking is observed, as well as separate feedback loops between destination walking and objective metrics of the built environment, and destination walking and perception of the built environment. These feedback loops affect the ability to observe how the built environment correlates with residents' physical health. Previous studies have investigated pieces of these associations, but are potentially missing the more complex relationships present. This study proposes a conceptual model describing complex feedback relationships between destination walking and public health, with the built environment expected to increase or decrease the strength of the feedback loop. Evidence supporting these feedback relationships is presented.

Public spaces and urban sustainability in the tropical built environment

Science.gov (United States)

Yusof, Y. M.; Kozlowski, M.

2018-01-01

Sustainability is an overarching sense of responsibility towards the future. On a city-wide level, urban sustainability incorporates a wide body of changes especially as they relate to the built environment, all of which intended at creating a livable place. This paper discusses existing public spaces in view of their achievement against a set of criteria for the built environment. The paper introduces performance design criteria for the tropical built environment. The key findings indicate that long-term strategies, guidance and directions for the city and region can achieve development which corresponds to local climate, synergies and provide a higher proportion of public spaces that offer something for everyone.

Strategic analysis of a factory built home opportunity in Western Canada

OpenAIRE

Henderson, Stephen Gary

2006-01-01

A strategic analysis was completed to determine the feasibility of initiating a factory-built home manufacturing facility in Western Canada. We completed an industry analysis, internal analysis, an opportunity analysis and provide a recommendation on how to proceed. The results indicate a factory built facility is economically feasible if a market of 60 houses per year can be established. The competitive advantages of factory built homes over on-site homes indicate a better quality home can b...

Outline of the wireless hut built in 1957 and the old living hut built in 1969 at Syowa Station, Antarctica and outside environment -Preface-

Directory of Open Access Journals (Sweden)

Zenkichi Hirayama

2002-09-01

Full Text Available It has been decided to dismantle the wireless hut built in 1957 and the old living hut built in 1969 at Syowa Station, Antarctica in accordance with a renewal project plan. A Commission of Construction Experts, the Architect Committee brought the above two buildings as test samples to Japan and in cooperation with several research institutes and researchers, investigated the effect of aging. We herein report the those results.

The Built Environment and Childhood Obesity in Durham, NC

Science.gov (United States)

Miranda, Marie Lynn; Edwards, Sharon E.; Anthopolos, Rebecca; Dolinsky, Diana H.; Kemper, Alex R.

2013-01-01

The relationship between childhood obesity and aspects of the built environment characterizing neighborhood social context is understudied. We evaluate the association between seven built environment domains and childhood obesity in Durham, NC. Measures of housing damage, property disorder, vacancy, nuisances, and territoriality were constructed using data from a 2008 community assessment. Renter-occupied housing and crime measures were developed from public databases. We linked these measures to 2008–2009 Duke University Medical Center pediatric preventive care visits. Age- and sex-specific body mass index percentiles were used to classify children as normal weight (>5th and ≤ 85th percentile), overweight (>85th and ≤ 95th percentile), or obese (> 95th percentile). Ordinal logistic regression models with cluster-corrected standard errors evaluated the association between weight status and the built environment. Adjusting for child-level socioeconomic characteristics, nuisances and crime were associated with childhood overweight/obesity (Penvironment characteristics appear important to childhood weight status in Durham, NC. PMID:22563061

Built urban heritage conservation in Islamic societies: Study case in Banda Aceh, Indonesia

Science.gov (United States)

Meutia, Z. D.

2017-06-01

This paper aims to find the concept of the built heritage related to Islamic societies with a case study in the city of Banda Aceh through study literature review, with the context of the planning in the era of uncertainty. In this paper will be elaborated and described what it was about heritage and urban heritage and conservation Islamic values in heritage, as well as explain the concept of the built heritage conservation in Islamic societies. Discussion and analysis will be done through its study literature. Literature reviews about built urban heritage conservation and perspective of the Islamic societies in Banda aceh was done using systematic methodology literature review. This methodology summarizes research results earlier that presents the fact that a more comprehensive and balanced. The synthesis of the results conducted using narrative techniques or technique of qualitative. The discovery paper in this paper is to understand the relationship the built heritage conservation of Islamic societies perspective that consider shari’a aspect and local tradition in built urban heritage that can affect to heritage planning.

Osteointegration of a bisphenol-a-glycidyl-dimethacrylate composite and its use in anterior skull base defects: an experimental study in an experimental design model of cerebrospinal fluid leak.

Science.gov (United States)

Sanus, Galip Zihni; Kucukyuruk, Baris; Biceroglu, Huseyin; Isler, Cihan; Tanriverdi, Taner; Bas, Ahmet; Albayram, Sait; Kurkcu, Mehmet; Oz, Buge

2014-07-01

Promising clinical results were reported in watertight closure of anterior skull base defects (ASBDs) with bisphenol-a-glycidyl-dimethacrylate (bis-GMA)-based materials to prevent the cerebrospinal fluid leaks. However, interrelation of these materials with surrounding bones in histologic level, referred to as the osteointegration, has not been reported in the anterior skull base. In addition, an illustrative case with an ASBD that was repaired using a bis-GMA composite has been presented. Twenty New Zealand rabbits were divided into 4 groups: control and sham groups consisted of 2 and 6 rabbits, respectively. The "skull base defect" group (n = 6) underwent a unifrontal craniectomy and an iatrogenic ASBD followed by creating a dural defect to obtain a cerebrospinal fluid leak. Similar bony and dural defects were acquired in the "repair with bis-GMA based allograft" group (n = 6), but the bony defect was closed with bis-GMA-based allograft. All animals in the "skull base defect" group died in 3 weeks after surgery. There were no animal losses in the "repair with bis-GMA based allograft" group at the sixth month. Histologic evaluation revealed complete osteointegration of bis-GMA composite with surrounding bones. bis-GMA based allograft achieved a watertight repair of the ASBD. Histologic findings of this study showed that bis-GMA composite is a reliable material to be used in the closure of anterior skull base bony defects.

Peripheral Blood CD64 Levels Decrease in Crohn’s Disease following Granulocyte and Monocyte Adsorptive Apheresis

Directory of Open Access Journals (Sweden)

Toshimi Chiba

2011-12-01

Full Text Available Granulocyte and monocyte adsorptive apheresis (GMA is reportedly useful as induction therapy for Crohn’s disease (CD. However, the effects of GMA on CD64 have not been well characterized. We report here our assessment of CD64 expression on neutrophils before and after treatment with GMA in two patients with CD. The severity of CD was assessed with the CD activity index (CDAI. The duration of each GMA session was 60 min at a flow rate of 30 ml/min as per protocol. CD64 expression on neutrophils was measured by analyzing whole blood with a FACScan flow cytometer. In case 1, CD64 levels after each session of GMA tended to decrease compared to pretreatment levels, whereas in case 2, CD64 levels dropped significantly after treatment. The CDAI decreased after GMA in both cases 1 and 2. A significant correlation was noted between CDAI scores and CD64 levels in both cases. In conclusion, GMA reduced blood CD64 levels, which would be an important factor for the decrease of CDAI scores.

Built environment : Eindhoven University of Technology 2013-2014

NARCIS (Netherlands)

Bosman, A.H.J.

2014-01-01

In Built Environment 2013-2014 presenteert de faculteit Built Environment/Bouwkunde van de TU Eindhoven een keuze uit de beste afstudeerprojecten, becommentarieerd door deskundigen van binnen en buiten de faculteiten.

SPE coupled to AAS trace determination of Cd(II) and Zn(II) in food samples using amine functionalized GMA-MMA-EGDMA terpolymer: Isotherm and kinetic studies.

Science.gov (United States)

Islam, Aminul; Kumar, Suneel; Zaidi, Noushi; Ahmad, Hilal

2016-12-15

An ethylenediamine functionalized glycidyl methacrylate (GMA) based terpolymeric chelating resin was synthesized for the separation and preconcentration of Cd(II) and Zn(II) by SPE from bread, rice and fruit juice prior to FAAS determination. The resin was characterized by FT-IR, TGA/DTA, SEM, BET analysis and EDS. Synthesized resin shows a good capacity of 53.96mgg(-1) for Cd(II) and 24.19mgg(-1) for Zn(II) at pH 8.0. Five isotherm equilibrium models were studied to explain the sorption phenomenon out of which Langmuir, Dubinin-Radushkevich, Scatchard and Temkin models were found to be the best fitted. The limit of detection (LOD) and limit of quantification (LOQ) were observed to be 1.5 and 5.1μgL(-1) for Cd and 1.2 and 4.1μgL(-1) for Zn. The reliability of the method was investigated by the analysis of SRM and the recovery of analytes from various spiked food samples. Copyright © 2016 Elsevier Ltd. All rights reserved.

The built environment and older adults: A literature review and an applied approach to engaging older adults in built environment improvements for health.

Science.gov (United States)

Tuckett, Anthony G; Banchoff, Ann W; Winter, Sandra J; King, Abby C

2018-03-01

This paper presents a review of the literature about the built environment as it impacts the health of older people. It then introduces the gerontological nurse and researcher to the Our Voice framework for engaging older people as citizen scientists in order to empower them as agents of change in improving their local built environment and ultimately advancing community health. Community-level strategies to promote successful ageing in place are critical both to optimising health outcomes and containing healthcare costs. Such strategies must take into account the influence of the built environment both on individual health behaviours and on overall community health. At the same time, the perspectives and experiences of older people themselves ought to inform policies and practices in a systematic way. Integrative literature review. A wide scan of English language articles published in the EMBASE, PubMed and CINAHL bibliographic databases was conducted. Additional articles were sourced by mining relevant reference lists (i.e., snowball sampling). Papers included were published between 2005 and 2016. Three distinct components emerged from the review: the impact of the built environment on health-in particular the health of older persons; citizen science and its applicability for older people research; and the promise of the Our Voice citizen science framework to activate changes in the built environment that improve older peoples' health. The ageing of the world's population brings with it an increased population-level risk of chronic disease and disability. We present the Our Voice framework, developed by researchers at Stanford University, as a promising strategy for engaging and empowering older people as citizen scientists, as a framework to apply to gerontological nursing and improving community health. Gerontology nurses are encouraged to: (i) Recognise the impact of the built environment and other community-level factors on the health of their patients. (ii

Built-Environment Wind Turbine Roadmap

Energy Technology Data Exchange (ETDEWEB)

Smith, J.; Forsyth, T.; Sinclair, K.; Oteri, F.

2012-11-01

Although only a small contributor to total electricity production needs, built-environment wind turbines (BWTs) nonetheless have the potential to influence the public's consideration of renewable energy, and wind energy in particular. Higher population concentrations in urban environments offer greater opportunities for project visibility and an opportunity to acquaint large numbers of people to the advantages of wind projects on a larger scale. However, turbine failures will be equally visible and could have a negative effect on public perception of wind technology. This roadmap provides a framework for achieving the vision set forth by the attendees of the Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the U.S. Department of Energy's National Renewable Energy Laboratory. The BWT roadmap outlines the stakeholder actions that could be taken to overcome the barriers identified. The actions are categorized as near-term (0 - 3 years), medium-term (4 - 7 years), and both near- and medium-term (requiring immediate to medium-term effort). To accomplish these actions, a strategic approach was developed that identifies two focus areas: understanding the built-environment wind resource and developing testing and design standards. The authors summarize the expertise and resources required in these areas.

Ultra fast x-ray streak camera

International Nuclear Information System (INIS)

Coleman, L.W.; McConaghy, C.F.

1975-01-01

A unique ultrafast x-ray sensitive streak camera, with a time resolution of 50psec, has been built and operated. A 100A thick gold photocathode on a beryllium vacuum window is used in a modified commerical image converter tube. The X-ray streak camera has been used in experiments to observe time resolved emission from laser-produced plasmas. (author)

26 CFR 1.382-7 - Built-in gains and losses. [Reserved

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Built-in gains and losses. [Reserved] 1.382-7 Section 1.382-7 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Insolvency Reorganizations § 1.382-7 Built-in gains and losses. [Reserved] ...

INTEGRAL discovered a new hard X-ray source: IGRJ17511-3057

DEFF Research Database (Denmark)

Baldovin, C.; Kuulkers, E.; Ferrigno, C.

2009-01-01

with a significance of 14 sigma in the 20-40 keV energy band, and 7 sigma in the 40-80 keV energy band. The corresponding count rates in these bands are 4.2+/0.3 cts/s (28 mCrab) and 1.8+/-0.3 cts/s (25 mCrab), respectively. The source is also detected in the JEM-X mosaic in the three energy bands 3-7 keV, 7-11 ke......V, and 11-20 keV. The source flux is ~20 mCrab and the detection significance is 3 sigma in all bands. The best determined source position is RA: 267.811 DEC: -30.954 (J2000), with a 90% error radius of 2.0 arcmin. The combined IBIS/ISGRI and JEM-X spectrum in the 3-100 keV energy range is well described...... by a single power-law with photon index 2.0+/-0.2. The source flux is 5.7e-10 erg/cm2/s in the 3-20 keV energy band and 4.8e-10 erg/cm2/s in the 20-100 keV energy band....

The superconducting high-resolution soft X-ray spectrometer at the advanced biological and environmental X-ray facility

Energy Technology Data Exchange (ETDEWEB)

Friedrich, S. [Advanced Detector Group, Lawrence Livermore National Laboratory, 7000 East Avenue, L-188, Livermore, CA 94550 (United States); Advanced Biological and Environmental X-ray Facility, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 94720 (United States)], E-mail: Friedrich1@llnl.gov; Drury, O.B. [Advanced Detector Group, Lawrence Livermore National Laboratory, 7000 East Avenue, L-188, Livermore, CA 94550 (United States); Advanced Biological and Environmental X-ray Facility, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 94720 (United States); Biophysics Group, University of California, 1 Shields Avenue, EU-III, Davis, CA 95616 (United States); George, S.J. [Advanced Biological and Environmental X-ray Facility, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 94720 (United States); Cramer, S.P. [Advanced Biological and Environmental X-ray Facility, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 94720 (United States); Biophysics Group, University of California, 1 Shields Avenue, EU-III, Davis, CA 95616 (United States)

2007-11-11

We have built a 36-pixel superconducting tunnel junction X-ray spectrometer for chemical analysis of dilute samples in the soft X-ray band. It offers an energy resolution of {approx}10-20 eV FWHM below 1 keV, a solid angle coverage of {approx}10{sup -3}, and can be operated at total rates of up to {approx}10{sup 6} counts/s. Here, we describe the spectrometer performance in speciation measurements by fluorescence-detected X-ray absorption spectroscopy at the Advanced Biological and Environmental X-ray facility at the ALS synchrotron.

Spatiotemporal changes of built-up land and population distribution patterns in China during 1990-2010

Science.gov (United States)

Ren, Y. H.; Liu, Y. L.; Yu, L. J.

2017-02-01

With the population growth, built-up land is expanding constantly in China. The paper aims to analyse spatiotemporal pattern of built-up land and population, and their relationship in China mainland from 1990 to 2010. With population census data and built-up land data, it calculates population density of counties, built-up surface proportion and population density by built-up land, as measures of population and built-up land distribution. The result shows that, the total population and built-up area have increased by 17.5% and 33.9%, respectively, in China mainland from 1990 to 2010. Meanwhile, the population density of built-up land has decreased by 12.0%, indicating that built-up land growth has outpaced population growth overall. However, such changes are not evenly distributed in space and time. Change in the later decade is much more significant than that in the earlier decade. For built-up land, the increases don’t show obvious characteristics of spatial aggregation. Correspondingly, most increases in population density of counties and population density of built-up area are in the northwest area, divided by Aihui-Tengchong line, while most decreases are in the southeast area. These analyses help to explain the overall impact of political-economic environment and the policy changes on urbanization processes for China mainland.

X-ray streak crystal spectography

International Nuclear Information System (INIS)

Kauffman, R.L.; Brown, T.; Medecki, H.

1983-01-01

We have built an x-ray streaked crystal spectrograph for making time-resolved x-ray spectral measurements. This instrument can access Bragg angles from 11 0 to 38 0 and x-ray spectra from 200 eV to greater than 10 keV. We have demonstrated resolving powers, E/δE > 200 at 1 keV and time resolution less than 20 psec. A description of the instrument and an example of the data is given

Modification of flax fibres by radiation induced emulsion graft copolymerization of glycidyl methacrylate

Science.gov (United States)

Moawia, Rihab Musaad; Nasef, Mohamed Mahmoud; Mohamed, Nor Hasimah; Ripin, Adnan

2016-05-01

Flax fibres were modified by radiation induced graft copolymerization of glycidyl methacrylate (GMA) by pre-irradiation method in an emulsion medium. The effect of reaction parameters on the degree of grafting (DOG) such as concentration of bleaching agent, absorbed dose, monomer concentration, temperature and reaction time were investigated. The DOG was found to be dependent on the investigated parameters. The incorporation of poly(GMA) grafts in the bleached flax fibres was confirmed by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The structural and mechanical changes were evaluated by X-ray diffraction (XRD) and mechanical tester, respectively. The results revealed that reacting bleached flax fibres irradiated with 20 kGy with 5% GMA emulsion containing 0.5% polyoxyethylene-sorbitan monolaurate (Tween 20) surfactant at 40 °C for 1 h led to a maximum DOG of 148%. The grafted fibres showed sufficient mechanical strength and hydrophobicity which make them promising precursors for development of adsorbents after appropriate chemical treatments.

Testate amoebae analysis in the peat deposits of the swamp Dolgon’koye in the south of Western Siberia and peatland paleohydrology for last 3100 years

Science.gov (United States)

Kurina, Irina V.; Blyakharchuk, Tatiana A.

2018-03-01

Our research is devoted to paleohydrological reconstruction in the swamp located in the river valley on the piedmont of the Altai Mountains in the south of Western Siberia. The reconstruction was carried out based on rhizopod analysis for the last 3100 cal yr. A large amount of different testate amoebae was found in the peat. Total 64 testate amoebae taxa were recorded in the peat core with the most abundant being: Trinema lineare, Centropyxis aculeata, C. aerophila, Euglypha rotunda, Cryptodifflugia sp. Decrease of surface wetness in the swamp are observed 2280, 2140, 1900–600 cal yr BP and increase – in 2700, 2500–1900, 230–215 cal yr BP. The results of our reconstruction of the swamp paleohydrology agrees well with the paleoclimatic data obtained earlier for the central area of the south of Western Siberia Plain. It indicates a high sensitivity of the swamp to climatic changes in the Holocene. The rhizopod analysis proved to be very effective when used for paleohydrology reconstruction in minerotrophic peat.

Built heritage monitoring conservation management

CERN Document Server

Boriani, Maurizio; Guidi, Gabriele

2015-01-01

This book provides a comprehensive, up-to-date overview on the most pressing issues in the conservation and management of archaeological, architectural, and urban landscapes. Multidisciplinary research is presented on a wide range of built heritage sites, from archaeological ruins and historic centers through to twentieth century and industrial architectural heritage. The role of ICT and new technologies, including those used for digital archiving, surveying, modeling, and monitoring, is extensively discussed, in recognition of their importance for professionals working in the field. Detailed attention is also paid to materials and treatments employed in preventive conservation and management. With contributions from leading experts, including university researchers, professionals, and policy makers, the book will be invaluable for all who seek to understand, and solve, the challenges faced in the protection and enhancement of the built heritage.

Graphene macro-assembly-fullerene composite for electrical energy storage

Science.gov (United States)

Campbell, Patrick G.; Baumann, Theodore F.; Biener, Juergen; Merrill, Matthew; Montalvo, Elizabeth; Worsley, Marcus A.; Biener, Monika M.; Hernandez, Maira Raquel Ceron

2018-01-16

Disclosed here is a method for producing a graphene macro-assembly (GMA)-fullerene composite, comprising providing a GMA comprising a three-dimensional network of graphene sheets crosslinked by covalent carbon bonds, and incorporating at least 20 wt. % of at least one fullerene compound into the GMA based on the initial weight of the GMA to obtain a GMA-fullerene composite. Also described are a GMA-fullerene composite produced, an electrode comprising the GMA-fullerene composite, and a supercapacitor comprising the electrode and optionally an organic or ionic liquid electrolyte in contact with the electrode.

Gas position sensitive x-ray detectors

International Nuclear Information System (INIS)

Barbosa, A.F.

1994-12-01

The construction of gas x-ray detectors used to count and localize x-ray photons in one and two dimensions is reported. The principles of operation of the detectors are described, as well as the electronic modules comprised in the data acquisition system. Results obtained with detectors built at CBPF are shown, illustrating the performance of the Linear Position Sensitive Detectors. (author). 6 refs, 14 figs

Transitions of bandgap and built-in stress for sputtered HfZnO thin films after thermal treatments

Energy Technology Data Exchange (ETDEWEB)

Li, Chih-Hung; Chen, Jian-Zhang [Institute of Applied Mechanics, National Taiwan University, Taipei City 10617, Taiwan (China); Cheng, I-Chun [Graduate Institute of Photonics and Optoelectronics and Department of Electrical Engineering, National Taiwan University, Taipei City 10617, Taiwan (China)

2013-08-28

HfZnO thin films with various Hf contents are sputter-deposited on glass substrates from Hf{sub x}Zn{sub 1−x}O (x = 0, 2.5, 5, 7.5, and 10 at. %) targets at room temperature. The incorporation of Hf in the ZnO film leads to the amorphorization of the materials. The amorphous structures of high-Hf-content films remain after annealing at 600 °C for 30 min. The built-in stresses of as-deposited films are compressive. As the annealing temperature increases, the stresses are relaxed and even become tensile. The films exhibit a high transmission of 80% in the visible region. The optical bandgap increases with the Hf content, but it decreases with the annealing temperature. This can be attributed to the alteration of strain (stress) status in the films and atomic substitution. The reduction of bandgap partly results from the grain growth, which is due to the quantum confinement effect of the small grains. Hf doping increases the resistivity of ZnO owing to the disorder of the material structure and the higher bandgap, which result in more carrier traps and less thermally excited carriers in the conduction bands.

Encouraging a 'Barrier-free Built Environment' in a Malaysian University

Directory of Open Access Journals (Sweden)

Hazreena Hussein

2005-12-01

Full Text Available A good pedestrian network around the campus should be accessible and friendly for all users including disabled persons. The environment should offer some activity nodes to ensure that the learning and working in campus is more pleasant. The paper will clarify the importance of collaborative development among various professionals and organisations in order to achieve a 'barrier-free built environment', focusing on the University of Malaya as a case study. It will share experience on the education of inclusive design for students who will become professionals and responsible in implementing the legislation relating to safety, accessibility and usability of the built environment. As the objective is the issue of educating relevant professionals, it will introduce methods in teaching professionals as a strategy to advocate a 'barrier-free built environment'. The paper will also illustrate the efforts done in encouraging the agenda which have been implemented around the case study.

Exposure of coastal built assets in the South Pacific to climate risks

Science.gov (United States)

Kumar, Lalit; Taylor, Subhashni

2015-11-01

Pacific island countries (PICs) are situated in a highly dynamic ocean-atmosphere interface, are dispersed over a large ocean area, and have highly populated urban centres located on the coastal margin. The built infrastructure associated with urban centres is also located within close proximity to the coastlines, exposing such infrastructure to a variety of natural and climate change-related hazards. In this research we undertake a comprehensive analysis of the exposure of built infrastructure assets to climate risk for 12 PICs. We show that 57% of the assessed built infrastructure for the 12 PICs is located within 500 m of their coastlines, amounting to a total replacement value of US$21.9 billion. Eight of the 12 PICs have 50% or more of their built infrastructure located within 500 m of their coastlines. In particular, Kiribati, Marshall Islands and Tuvalu have over 95% of their built infrastructure located within 500 m of their coastlines. Coastal adaptation costs will require substantial financial resources, which may not be available in developing countries such as the PICs, leaving them to face very high impacts but lacking the adaptive capacity.

Muoproduction of J/psi(3100)

Energy Technology Data Exchange (ETDEWEB)

Markiewicz, T.W.

1981-10-01

Interactions of 209-GeV muons within an instrumented magnetized-steel calorimeter have produced 4374 +- 87 ..mu../sup +/..mu../sup -/ pairs from J/psi decay, corresponding to the cross section sigma(..mu..N ..-->.. ..mu.. psi X) = 0.64 +- 0.10 nb. These interactions are classified as either elastic (sigma = 0.36 +- 0.07 nb) or inelastic (sigma = 0.28 +- 0.06 nb) based primarily on the calorimetric determination of E/sub X/. The cross section for elastic psi production by virtual photons, sigma/sub eff/(..gamma../sub V/N), rises with energy nu as log nu. Its dependence on Q/sup 2/ fits the vector-meson dominance form P(..lambda..) = (1 + Q/sup 2//..lambda../sup 2/)/sup -2/, with ..lambda.. = (2.0 - 2.4) +- 0.15 GeV, where the spread in values arises from considering the possibility of a Q/sup 2/ dependence in the decay angular distribution W (theta,phi) and in the nuclear shadowing factor. We find that W(theta,phi) is consistent with the form expected if the reaction ..gamma../sub V/N ..-->.. psiN conserves helicity in the s channel through natural-parity exchange in the t channel. After correction for nuclear effects, d sigma/sub eff//dt is described by the sum of two exponential terms in t, with average t slope b = 2.56 (+0.35 or - 0.32). The photon-gluon fusion (..gamma..g ..-->.. psi) perturbative quantum chromodynamic model for psi production provides an excellent description of the nu dependence of sigma/sub eff/, but cannot simultaneously explain the observed cross section and value of ..lambda... The differential cross section d/sup 2/sigma/sub eff//dzdp/sub perpindicular//sup 2/ for inelastically produced psi's rises approximately linearly with elasticity z identical with E/sub psi//nu. The p/sub perpendicular//sup 2/ dependence is flatter than that of d sigma/dt for elastic events, with average p/sub perpendicular//sup 2/ slope b = 1.46 +- 0.10. The Q/sup 2/ dependence of sigma/sub eff/ is that of P(..lambda..) with ..lambda.. = 3.0 +- 0.2 GeV, and

Muonproduction of J/psi(3100)

International Nuclear Information System (INIS)

Markiewicz, T.W.

1981-10-01

Interactions of 209-GeV muons within an instrumented magnetized-steel calorimeter have produced 4374 +- 87 μ + μ - pairs from J/psi decay, corresponding to the cross section sigma(μN → μ psi X) = 0.64 +- 0.10 nb. These interactions are classified as either elastic (sigma = 0.36 +- 0.07 nb) or inelastic (sigma = 0.28 +- 0.06 nb) based primarily on the calorimetric determination of E/sub X/. The cross section for elastic psi production by virtual photons, sigma/sub eff/(γ/sub V/N), rises with energy nu as log nu. Its dependence on Q 2 fits the vector-meson dominance form P(Λ) = (1 + Q 2 /Λ 2 ) -2 , with Λ = (2.0 - 2.4) +- 0.15 GeV, where the spread in values arises from considering the possibility of a Q 2 dependence in the decay angular distribution W (theta,phi) and in the nuclear shadowing factor. We find that W(theta,phi) is consistent with the form expected if the reaction γ/sub V/N → psiN conserves helicity in the s channel through natural-parity exchange in the t channel. After correction for nuclear effects, d sigma/sub eff//dt is described by the sum of two exponential terms in t, with average t slope b = 2.56 (+0.35 or - 0.32). The photon-gluon fusion (γg → psi) perturbative quantum chromodynamic model for psi production provides an excellent description of the nu dependence of sigma/sub eff/, but cannot simultaneously explain the observed cross section and value of Λ. The differential cross section d 2 sigma/sub eff//dzdp/sub perpindicular/ 2 for inelastically produced psi's rises approximately linearly with elasticity z identical with E/sub psi//nu. The p/sub perpendicular/ 2 dependence is flatter than that of d sigma/dt for elastic events, with average p/sub perpendicular/ 2 slope b = 1.46 +- 0.10. The Q 2 dependence of sigma/sub eff/ is that of P(Λ) with Λ = 3.0 +- 0.2 GeV, and the nu dependence is similar to that observed for elastic production. 101 references, 33 figures, 20 tables

Production of wind power in the built environment. Final report

International Nuclear Information System (INIS)

Lakeman, L.G.J.; Peters, D.J.; Bruessau, K.M.; Lichtenberg, R.; Cleijne, H.; Hoeve, R.J.

2002-01-01

A state-of-the-art is given of the production of energy from wind in the built environment in the Netherlands. Also attention is paid to technical, planning, sociological and economical bottlenecks for the use of small wind turbines in the built environment. And finally, the perspectives in the light of renewable energy targets in the Netherlands for the year 2020 are discussed. Two scenario's were discussed: (1) turbines installed on or next to buildings; and (2) turbines that are integrated in the building [nl

Costs of radiation protection in X-ray diagnosis

International Nuclear Information System (INIS)

Prahl, M.

1987-01-01

The study described investigates into the costs arising from physical protection measures against radiation, in particular from dosimetric determinations carried out in humans according to section 40 of the X-Ray Ordinance, from special structural requirements of examination rooms and higher purchase prices for X-ray units offering built-in protective devices (hardware-related radiation protection). The conventional fluoroscope is chosen as an example of how this is achieved today. At first, a survey is given of X-ray installations in North Rhine-Westphalia, the technical details of which are described. This provides approximative information on the extent of dosimetric calculations in humans, the necessary expenditure on shieldings and the costs involved in additional hardware-related measures. (orig./DG) [de

Leitlinie für Fakultäts-interne Leistungsnachweise während des Medizinstudiums: Ein Positionspapier des GMA-Ausschusses Prüfungen und des Kompetenzzentrums Prüfungen Baden-Württemberg [

Directory of Open Access Journals (Sweden)

,

2008-02-01

Full Text Available [english] With the implementation of a new licensing regulation for doctors in 2002 the responsibility for assessment was assigned from the German national examination board to the individual faculties, especially so for clinical subjects.39 graded reports have to be issued between the first national board examination (after 2 years of preclinical studies and the start of the internship (6th year. This new task provides special demands for assessment organization at faculty level. A number of prerequisites have to be met to guarantee adequate quality in assessment. To support faculties in meeting these requirements, guidelines were issued in cooperation with GMA assessment committee and the Baden-Württemberg competence centre for assessment in medical education. Developed on broad consensus these guidelines define quality requirements based on international standards. Their effect on quality improvement in German medical faculty’s examinations in clinical subjects is to be researched concomitantly.[german] Die neue ärztliche Approbationsordnung (ÄAppO aus dem Jahre 2002 verlagert die Prüfungsverantwortung insbesondere für den klinischen Studienabschnitt auf die Fakultäten:39 benotete Leistungsnachweise sind zwischen der ersten Staatsprüfung und praktischem Jahr zu erstellen. Diese neue Aufgabe stellt besondere Anforderungen an das fakultäre Prüfungswesen. Um eine angemessene Qualität der fakultären Prüfungen sicher zu stellen, sind eine Reihe von Voraussetzungen zu erfüllen. Die vorliegenden Leitlinien des GMA-Ausschusses Prüfungen und des Kompetenzzentrums Prüfungen des Landes Baden-Württemberg wurden erstellt, um die Fakultäten in dieser Aufgabe zu unterstützen. Die vorliegenden Leitlinien definieren die Qualitätsanforderungen unter Berücksichtigung internationaler Standards und wurden in breitem Konsens entwickelt. Ihre Wirkung im Hinblick auf die Qualitätsverbesserung der fakultären Prüfungen im klinischen

Controlled protein adsorption on PMOXA/PAA based coatings by thermally induced immobilization

Science.gov (United States)

Mumtaz, Fatima; Chen, Chaoshi; Zhu, Haikun; Pan, Chao; Wang, Yanmei

2018-05-01

In this work, poly(2-methyl-2-oxazoline-random-glycidyl methacrylate) (PMOXA-r-GMA) and poly(acrylic acid)-block-poly(glycidyl methacrylate) (PAA-b-PGMA) copolymers were synthesized via cationic ring-opening polymerization (CROP) of 2-methyl-2-oxazoline (MOXA) and reversible addition-fragmentation chain transfer (RAFT) polymerization of acrylic acid (AA) followed by their random and block copolymerization with glycidyl methacrylate (GMA), respectively, and then characterized carefully. PMOXA/PAA based coatings were then prepared by simply spin coating the mixture of PMOXA-r-GMA and PAA-b-PGMA copolymer solutions onto silicon/glass substrates followed by annealing at 110 °C. The coatings were rigorously characterized by using X-ray photoelectron spectroscopy (XPS), the static water contact angle (WCA) test, ellipsometry and atomic force microscopy (AFM). The results demonstrated that the coating based mixed PMOXA/PAA brushes with desired surface composition could be attained by simply maintaining their percentage in the mixture of PMOXA-r-GMA and PAA-b-PGMA copolymer solutions. Finally, the switchable behavior of PMOXA/PAA based coatings toward bovine serum albumin (BSA) adsorption was investigated by fluorescein isothiocyanate-labelled BSA (FITC-BSA) assay and quartz crystal microbalance with dissipation monitoring (QCM-D), which indicated that the coating based mixed PMOXA/PAA brushes could control BSA adsorption/desorption from very low to high amount (>90% desorption) through adjusting the composition of PMOXA-r-GMA and PAA-b-PGMA solution used in preparing PMOXA/PAA based coatings upon pH and ionic strength change. Furthermore, PMOXA/PAA based coatings displayed efficient repeatability of reversible BSA adsorption/desorption cycles.

Disused Religious Space: Youth Participation in Built Heritage Regeneration

Directory of Open Access Journals (Sweden)

Karen Davison

2017-06-01

Full Text Available The rights of young people to participate in decision-making processes that affect their lives has been encouraged since the United Nations Convention on the Rights of the Child (1989. Since then, policy-makers and planners have started to consider the views of youth, especially those aged 11–17. The size of the youth population and their feelings of social isolation are two important reasons to include them in the decision-making that affects their local built environment. Little is known about youth opinions of the built environment and in particular disused religious buildings which can become a significant part of local cultural heritage. This paper explores youth perceptions, place attachment and influence on identity of a prominent disused local Methodist church in the City of Belfast. The paper details the expressive methodological approach designed to encourage youth participation in the regeneration scheme. The findings of the study showcase the valuable connections that can be made between youth and heritage religious buildings through education programmes. The project conclusions also highlight the benefits to be gained from engaging youth in local built heritage and will be of interest to those involved in the design, planning and redevelopment processes.

76 FR 65634 - Redetermination of the Consolidated Net Unrealized Built-In Gain and Loss

Science.gov (United States)

2011-10-24

... Redetermination of the Consolidated Net Unrealized Built-In Gain and Loss AGENCY: Internal Revenue Service (IRS... consolidated net unrealized built-in gain and loss in certain circumstances. This document also invites... gain (NUBIG) at the time of its ownership change, recognized built-in gains will increase the section...

The GlueX DIRC detector

Science.gov (United States)

Barbosa, F.; Bessuille, J.; Chudakov, E.; Dzhygadlo, R.; Fanelli, C.; Frye, J.; Hardin, J.; Kelsey, J.; Patsyuk, M.; Schwarz, C.; Schwiening, J.; Stevens, J.; Shepherd, M.; Whitlatch, T.; Williams, M.

2017-12-01

The GlueX DIRC (Detection of Internally Reflected Cherenkov light) detector is being developed to upgrade the particle identification capabilities in the forward region of the GlueX experiment at Jefferson Lab. The GlueX DIRC will utilize four existing decommissioned BaBar DIRC bar boxes, which will be oriented to form a plane roughly 4 m away from the fixed target of the experiment. A new photon camera has been designed that is based on the SuperB FDIRC prototype. The full GlueX DIRC system will consist of two such cameras, with the first planned to be built and installed in 2017. We present the current status of the design and R&D, along with the future plans of the GlueX DIRC detector.

Built spaces and features associated with user satisfaction in maternity waiting homes in Malawi.

Science.gov (United States)

McIntosh, Nathalie; Gruits, Patricia; Oppel, Eva; Shao, Amie

2018-07-01

To assess satisfaction with maternity waiting home built spaces and features in women who are at risk for underutilizing maternity waiting homes (i.e. residential facilities that temporarily house near-term pregnant mothers close to healthcare facilities that provide obstetrical care). Specifically we wanted to answer the questions: (1) Are built spaces and features associated with maternity waiting home user satisfaction? (2) Can built spaces and features designed to improve hygiene, comfort, privacy and function improve maternity waiting home user satisfaction? And (3) Which built spaces and features are most important for maternity waiting home user satisfaction? A cross-sectional study comparing satisfaction with standard and non-standard maternity waiting home designs. Between December 2016 and February 2017 we surveyed expectant mothers at two maternity waiting homes that differed in their design of built spaces and features. We used bivariate analyses to assess if built spaces and features were associated with satisfaction. We compared ratings of built spaces and features between the two maternity waiting homes using chi-squares and t-tests to assess if design features to improve hygiene, comfort, privacy and function were associated with higher satisfaction. We used exploratory robust regression analysis to examine the relationship between built spaces and features and maternity waiting home satisfaction. Two maternity waiting homes in Malawi, one that incorporated non-standardized design features to improve hygiene, comfort, privacy, and function (Kasungu maternity waiting home) and the other that had a standard maternity waiting home design (Dowa maternity waiting home). 322 expectant mothers at risk for underutilizing maternity waiting homes (i.e. first-time mothers and those with no pregnancy risk factors) who had stayed at the Kasungu or Dowa maternity waiting homes. There were significant differences in ratings of built spaces and features between the

The COURAGE Built Environment Outdoor Checklist: an objective built environment instrument to investigate the impact of the environment on health and disability.

Science.gov (United States)

Quintas, Rui; Raggi, Alberto; Bucciarelli, Paola; Franco, Maria Grazia; Andreotti, Alessandra; Caballero, Francisco Félix; Olaya, Beatriz; Chatterji, Somnath; Galas, Aleksander; Meriläinen-Porras, Satu; Frisoni, Giovanni; Russo, Emanuela; Minicuci, Nadia; Power, Mick; Leonardi, Matilde

2014-01-01

A tool to assess the built environment, which takes into account issues of disability, accessibility and the need for data comparable across countries and populations, is much needed. The Collaborative Research on Ageing in Europe (COURAGE) in Europe Built Environment Outdoor Checklist (CBE-OUT) helps us to understand when features of the neighbourhood environment have either a positive or negative impact on the accessibility of neighbourhoods for healthy ageing. The CBE-OUT is composed of 128 items that can be recorded when present in the evaluated environment. Audits were performed in households randomly selected from each cluster of the sample for Finland, Poland and Spain, following precise rules defined by experts. Global scores were computed both section by section and in the overall checklist, rescaling the resulting scores from 0 (negative environment) to 100 (positive). The total number of completed CBE-OUT checklists was 2452 (Finland, 245; Poland, 972; and Spain, 1235). Mean global score for our sample is 49.3, suggesting an environment composed both of facilitating and hindering features. Significant differences were observed in the built environment features of the three countries and in particular between Finland and the other two. The assessment of features of built environment is crucial when thinking about ageing and enhanced participation. The COURAGE in Europe project developed this tool to collect information on built environment in an objective evaluation of environmental features and is a recommended methodology for future studies. The CBE-OUT checklist is an objective evaluation of the built environment and is centred on technical measurement of features present in the environment and has its foundations in the concepts of disability and accessibility operating in the International Classification of Functioning, Disability and Health (ICF) model. The CBE-OUT checklist can be analysed using both the total score and the single section score

A novel tool for assessing and summarizing the built environment

Directory of Open Access Journals (Sweden)

Kroeger Gretchen L

2012-10-01

Full Text Available Abstract Background A growing corpus of research focuses on assessing the quality of the local built environment and also examining the relationship between the built environment and health outcomes and indicators in communities. However, there is a lack of research presenting a highly resolved, systematic, and comprehensive spatial approach to assessing the built environment over a large geographic extent. In this paper, we contribute to the built environment literature by describing a tool used to assess the residential built environment at the tax parcel-level, as well as a methodology for summarizing the data into meaningful indices for linkages with health data. Methods A database containing residential built environment variables was constructed using the existing body of literature, as well as input from local community partners. During the summer of 2008, a team of trained assessors conducted an on-foot, curb-side assessment of approximately 17,000 tax parcels in Durham, North Carolina, evaluating the built environment on over 80 variables using handheld Global Positioning System (GPS devices. The exercise was repeated again in the summer of 2011 over a larger geographic area that included roughly 30,700 tax parcels; summary data presented here are from the 2008 assessment. Results Built environment data were combined with Durham crime data and tax assessor data in order to construct seven built environment indices. These indices were aggregated to US Census blocks, as well as to primary adjacency communities (PACs and secondary adjacency communities (SACs which better described the larger neighborhood context experienced by local residents. Results were disseminated to community members, public health professionals, and government officials. Conclusions The assessment tool described is both easily-replicable and comprehensive in design. Furthermore, our construction of PACs and SACs introduces a novel concept to approximate varying

A novel tool for assessing and summarizing the built environment

Science.gov (United States)

2012-01-01

Background A growing corpus of research focuses on assessing the quality of the local built environment and also examining the relationship between the built environment and health outcomes and indicators in communities. However, there is a lack of research presenting a highly resolved, systematic, and comprehensive spatial approach to assessing the built environment over a large geographic extent. In this paper, we contribute to the built environment literature by describing a tool used to assess the residential built environment at the tax parcel-level, as well as a methodology for summarizing the data into meaningful indices for linkages with health data. Methods A database containing residential built environment variables was constructed using the existing body of literature, as well as input from local community partners. During the summer of 2008, a team of trained assessors conducted an on-foot, curb-side assessment of approximately 17,000 tax parcels in Durham, North Carolina, evaluating the built environment on over 80 variables using handheld Global Positioning System (GPS) devices. The exercise was repeated again in the summer of 2011 over a larger geographic area that included roughly 30,700 tax parcels; summary data presented here are from the 2008 assessment. Results Built environment data were combined with Durham crime data and tax assessor data in order to construct seven built environment indices. These indices were aggregated to US Census blocks, as well as to primary adjacency communities (PACs) and secondary adjacency communities (SACs) which better described the larger neighborhood context experienced by local residents. Results were disseminated to community members, public health professionals, and government officials. Conclusions The assessment tool described is both easily-replicable and comprehensive in design. Furthermore, our construction of PACs and SACs introduces a novel concept to approximate varying scales of community and

Preparing for climate change impacts in Norway's built environment

International Nuclear Information System (INIS)

Robert Lisoe, K.; Aandahl, G.; Eriksen, S.; Alfsen, K.

2003-01-01

This paper provides an overview of the Norwegian climate policy and of the practical implications of preparing Norway for climate change, with special emphasis on the challenges confronting the built environment. Although the Norwegian government has been relatively proactive in instituting measures aimed at halting global climate change, less attention has been paid to the challenge of adapting to climate change. The global climate system is likely to undergo changes, regardless of the implementation of abatement policies under the Kyoto Protocol or other regimes. The full range of impacts resulting from these changes is still uncertain; however, it is becoming increasingly clear that adaptation to climate change is necessary and inevitable within several sectors. The potential impacts of climate change in the built environment are now being addressed. Both the functionality of the existing built environment and the design of future buildings are likely to be altered by climate change impacts, and the expected implications of these new conditions are now investigated. However, measures aimed at adjustments within individual sectors, such as altering the criteria and codes of practice for the design and construction of buildings, constitute only a partial adaptation to climate change. In order to adapt effectively, larger societal and intersectoral adjustments are necessary. (author)

Altered ion transport in normal human bronchial epithelial cells following exposure to chemically distinct metal welding fume particles

Energy Technology Data Exchange (ETDEWEB)

Fedan, Jeffrey S., E-mail: jsf2@cdc.gov; Thompson, Janet A.; Meighan, Terence G.; Zeidler-Erdely, Patti C.; Antonini, James M.

2017-07-01

Welding fume inhalation causes pulmonary toxicity, including susceptibility to infection. We hypothesized that airway epithelial ion transport is a target of fume toxicity, and investigated the effects of fume particulates from manual metal arc-stainless steel (MMA-SS) and gas metal arc-mild steel (GMA-MS) on ion transport in normal human bronchial epithelium (NHBE) cultured in air-interface. MMA-SS particles, more soluble than GMA-MS particles, contain Cr, Ni, Fe and Mn; GMA-MS particles contain Fe and Mn. MMA-SS or GMA-MS particles (0.0167–166.7 μg/cm{sup 2}) were applied apically to NHBEs. After 18 h transepithelial potential difference (V{sub t}), resistance (R{sub t}), and short circuit current (I{sub sc}) were measured. Particle effects on Na{sup +} and Cl¯ channels and the Na{sup +},K{sup +},2Cl¯-cotransporter were evaluated using amiloride (apical), 5-nitro-2-[(3-phenylpropyl)amino]benzoic acid (NPPB, apical), and bumetanide (basolateral), respectively. MMA-SS (0.0167–16.7 μg/cm{sup 2}) increased basal V{sub t}. Only 16.7 μg/cm{sup 2} GMA-MS increased basal V{sub t} significantly. MMA-SS or GMA-MS exposure potentiated I{sub sc} responses (decreases) to amiloride and bumetanide, while not affecting those to NPPB, GMA-MS to a lesser degree than MMA-SS. Variable effects on R{sub t} were observed in response to amiloride, and bumetanide. Generally, MMA-SS was more potent in altering responses to amiloride and bumetanide than GMA-MS. Hyperpolarization occurred in the absence of LDH release, but decreases in V{sub t}, R{sub t}, and I{sub sc} at higher fume particulate doses accompanied LDH release, to a greater extent for MMA-SS. Thus, Na{sup +} transport and Na{sup +},K{sup +},2Cl¯-cotransport are affected by fume exposure; MMA-MS is more potent than GMA-MS. Enhanced Na{sup +} absorption and decreased airway surface liquid could compromise defenses against infection. - Highlights: • Welding fume particle toxicity was investigated in human bronchial

arXiv Charge collection properties in an irradiated pixel sensor built in a thick-film HV-SOI process

CERN Document Server

INSPIRE-00541780; Cindro, V.; Gorišek, A.; Hemperek, T.; Kishishita, T.; Kramberger, G.; Krüger, H.; Mandić, I.; Mikuž, M.; Wermes, N.; Zavrtanik, M.

2017-10-25

Investigation of HV-CMOS sensors for use as a tracking detector in the ATLAS experiment at the upgraded LHC (HL-LHC) has recently been an active field of research. A potential candidate for a pixel detector built in Silicon-On-Insulator (SOI) technology has already been characterized in terms of radiation hardness to TID (Total Ionizing Dose) and charge collection after a moderate neutron irradiation. In this article we present results of an extensive irradiation hardness study with neutrons up to a fluence of 1x10e16 neq/cm2. Charge collection in a passive pixelated structure was measured by Edge Transient Current Technique (E-TCT). The evolution of the effective space charge concentration was found to be compliant with the acceptor removal model, with the minimum of the space charge concentration being reached after 5x10e14 neq/cm2. An investigation of the in-pixel uniformity of the detector response revealed parasitic charge collection by the epitaxial silicon layer characteristic for the SOI design. The r...

Crystal structure and magnetic state of pseudo-binary intermetallic compounds Ho(Cosub(1-x)Nisub(x))sub(5)

International Nuclear Information System (INIS)

Chuev, V.V.; Kelarev, V.V.; Pirogov, A.N.; Sidorov, S.K.; Koryakova, V.S.

1983-01-01

In the range of 1.8-1000 K intermetallic compounds Ho(Cosub(1-x)Nisub(x))sub(5) have been investigated neutronographically and roentgenographically. Crystal structure of two series of samples: HoCosub(5.5-5.5x)Nisub(5x) and HoCosub(5-5x)Nisub(5x) is studied. It is shown that Ni atoms mainly occupy positions 2c, Co atoms - positions 3g; coordinates of atoms and position occupation of TbCu 7 type structure are specified. Analysis of magnetic structure is made, angles of magnetic momenta orientation as to crystallographic axes are determined. Magnetic phase diagram is built. Concentrational dependences of sublattice magnetization: Msub(Ho)(x), Mdsub(2c)(x), Mdsub(3g)(x) are determined

CSIR eNews: Built environment

CSIR Research Space (South Africa)

CSIR

2007-12-01

Full Text Available The CSIR's research activities in the built environment are aimed at supporting South Africa's competitive performance and the welfare and quality of life of its people through knowledge-generation for the development of an efficient and globally...

CSIR eNews: Built environment

CSIR Research Space (South Africa)

CSIR

2008-12-01

Full Text Available The CSIR's research activities in the built environment are aimed at supporting South Africa's competitive performance and the welfare and quality of life of its people through knowledge-generation for the development of an efficient and globally...

USO-Built Graduate School

NARCIS (Netherlands)

Bronswijk, van J.E.M.H.; Doevendans, C.H.; Verbeke, J.

2003-01-01

USO-Built is a distributed Graduate Research School under the CLUSTER (www.cluster.org) umbrella with its own aim, high-quality research and educational programs. It focuses on teaching research at the PhD and MPhil-level, concerns the technological domains of science aiming at balanced and implicit

The role of virtual reality and 3D modelling in built environment education

OpenAIRE

Horne, Margaret; Thompson, Emine Mine

2007-01-01

This study builds upon previous research on the integration of Virtual Reality (VR) within the built environment curriculum and aims to investigate the role of Virtual Reality and three-dimensional (3D) computer modelling on learning and teaching in a school of the built environment. In order to achieve this aim a number of academic experiences were analysed to explore the applicability and viability of 3D computer modelling and Virtual Reality (VR) into built environment subject areas. Altho...

A fax-machine amorphous silicon sensor for X-ray detection

Energy Technology Data Exchange (ETDEWEB)

Alberdi, J. [Association EURATOM/CIEMAT, Madrid (Spain); Barcala, J.M. [Association EURATOM/CIEMAT, Madrid (Spain); Chvatchkine, V. [Association EURATOM/CIEMAT, Madrid (Spain); Ioudine, I. [Association EURATOM/CIEMAT, Madrid (Spain); Molinero, A. [Association EURATOM/CIEMAT, Madrid (Spain); Navarrete, J.J. [Association EURATOM/CIEMAT, Madrid (Spain); Yuste, C. [Association EURATOM/CIEMAT, Madrid (Spain)

1996-10-01

Amorphous silicon detectors have been used, basically, as solar cells for energetics applications. As light detectors, linear sensors are used in fax and photocopier machines because they can be built with a large size, low price and have a high radiation hardness. Due to these performances, amorphous silicon detectors have been used as radiation detectors, and, presently, some groups are developing matrix amorphous silicon detectors with built-in electronics for medical X-ray applications. Our group has been working on the design and development of an X-ray image system based on a commercial fax linear amorphous silicon detector. The sensor scans the selected area and detects light produced by the X-ray in a scintillator placed on the sensor. Image-processing software produces a final image with better resolution and definition. (orig.).

Sustainability in the built environment using embedded technology

DEFF Research Database (Denmark)

Buch-Hansen, Thomas Cornelius; Storgaard, Kresten; Ærenlund, Lærke

2011-01-01

designated Open Built Source products (OBS), by applying two principle: compatibility and reuse of building products with embedded technology. The project is carried out by DI and SBi and involves 30 firms namely building materials manufacturers and IT developer companies. The methods used in the User...

A Theory of Sex Differences in Technical Aptitude and Some Supporting Evidence.

Science.gov (United States)

Schmidt, Frank L

2011-11-01

In this article, I present a theory that explains the origin of sex differences in technical aptitudes. The theory takes as proven that there are no sex differences in general mental ability (GMA), and it postulates that sex differences in technical aptitude (TA) stem from differences in experience in technical areas, which is in turn based on sex differences in technical interests. Using a large data set, I tested and found support for four predictions made by this theory: (a) the construct level correlation between technical aptitude and GMA is larger for females than males, (b) the observed and true score variability of technical aptitude is greater among males than females, (c) at every level of GMA females have lower levels of technical aptitude, and (d) technical aptitude measures used as estimates of GMA for decision purposes would result in underestimation of GMA levels for girls and women. Given that GMA carries the weight of prediction of job performance, the support found for this last prediction suggests that, for many jobs, technical aptitude tests may underpredict the job performance of female applicants and employees. Future research should examine this question. © Association for Psychological Science 2011.

26 CFR 1.382-7T - Built-in gains and losses (temporary).

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Built-in gains and losses (temporary). 1.382-7T Section 1.382-7T Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Insolvency Reorganizations § 1.382-7T Built-in gains and losses...

Smart built-in test

Science.gov (United States)

Richards, Dale W.

1990-03-01

The work which built-in test (BIT) is asked to perform in today's electronic systems increases with every insertion of new technology or introduction of tighter performance criteria. Yet the basic purpose remains unchanged -- to determine with high confidence the operational capability of that equipment. Achievement of this level of BIT performance requires the management and assimilation of a large amount of data, both realtime and historical. Smart BIT has taken advantage of advanced techniques from the field of artificial intelligence (AI) in order to meet these demands. The Smart BIT approach enhances traditional functional BIT by utilizing AI techniques to incorporate environmental stress data, temporal BIT information and maintenance data, and realtime BIT reports into an integrated test methodology for increased BIT effectiveness and confidence levels. Future research in this area will incorporate onboard fault-logging of BIT output, stress data and Smart BIT decision criteria in support of a singular, integrated and complete test and maintenance capability. The state of this research is described along with a discussion of directions for future development.

The relationship between the built environment and habitual levels of physical activity in South African older adults: a pilot study.

Science.gov (United States)

Kolbe-Alexander, Tracy L; Pacheco, Kyla; Tomaz, Simone A; Karpul, David; Lambert, Estelle V

2015-05-30

Previous research has shown that the built environment plays a role in habitual levels of physical activity (PA), however much of this research has been conducted in adults and higher income countries. The aim of this pilot study was to examine the strength of association between the built environment and PA in South African older adults. Participants were recruited (n = 44, mean age 65 ± 8.5 years) from two suburbs, representing either a high socioeconomic (HSA) or low socioeconomic area (LSA). Self-reported PA, and subjective assessments of neighborhood walkability (Neighborhood Environment Walkability Scale, NEWS) was measured. Participants wore Actigraph GT3x accelerometers to objectively quantify PA. HSA participants reported significantly more leisure-time and less transport PA. Objectively measured and self-reported MVPA was significantly higher in HSA participants. NEWS 'Land-use Mix' was negatively associated with leisure-time MVPA, (r(2) = 0.20; p leisure-time physical activity (r(2) = 0.33; p = 0.02). 'Safety from traffic' was inversely associated with travel-related PA (r(2) = 0.14, p = 0.01). None of the other NEWS scores were associated with PA for the total group. Leisure-time and transport-related PA was influenced by socio-economic status. Attributes of the perceived built environment associated with leisure-time and total MVPA in older South Africa adults were different in low- and high- income settings.

Temperature-dependent built-in potential in organic semiconductor devices

NARCIS (Netherlands)

Kemerink, M.; Kramer, J.M.; Gommans, H.H.P.; Janssen, R.A.J.

2006-01-01

The temperature dependence of the built-in voltage of organic semiconductor devices is studied. The results are interpreted using a simple analytical model for the band bending at the electrodes. It is based on the notion that, even at zero current, diffusion may cause a significant charge density

Tester-assisted built in test

Science.gov (United States)

Guntheroth, Kurt

It is noted that board makers invest considerable time and money writing extensive self-tests and that this investment can be multiplied by selecting ATE (automatic test equipment) that complements and extends the power of the self-test. The tester can diagnose boards in situations where a fault prevents the self-test from running. If the tester monitors such resources as processor, memory, and I/O, confidence in test results is improved. The tester can be used during development of the self-test and to turn on prototypes before the self-test is complete. The author argues that emulative functional testers outperform other types of ATE on boards with BIST (built-in self-test) and lists features of emulative functional testers that are most important to users of BIST.

Picosecond x-ray streak cameras

Science.gov (United States)

Averin, V. I.; Bryukhnevich, Gennadii I.; Kolesov, G. V.; Lebedev, Vitaly B.; Miller, V. A.; Saulevich, S. V.; Shulika, A. N.

1991-04-01

The first multistage image converter with an X-ray photocathode (UMI-93 SR) was designed in VNIIOFI in 1974 [1]. The experiments carried out in IOFAN pointed out that X-ray electron-optical cameras using the tube provided temporal resolution up to 12 picoseconds [2]. The later work has developed into the creation of the separate streak and intensifying tubes. Thus, PV-003R tube has been built on base of UMI-93SR design, fibre optically connected to PMU-2V image intensifier carrying microchannel plate.

Built structure identification in wildland fire decision support

Science.gov (United States)

David E. Calkin; Jon D. Rieck; Kevin D. Hyde; Jeffrey D. Kaiden

2011-01-01

Recent ex-urban development within the wildland interface has significantly increased the complexity and associated cost of federal wildland fire management in the United States. Rapid identification of built structures relative to probable fire spread can help to reduce that complexity and improve the performance of incident management teams. Approximate structure...

聚合物微球固载的N-羟基邻苯二甲酰亚胺在分子氧氧化苯甲醇反应过程中的催化特性%Catalytic characteristics of N-hydroxyphthalimide immobilized on polymer microspheres in oxidation of benzyl alcohol by molecular oxygen

Institute of Scientific and Technical Information of China (English)

杨晓林; 黄建龙; 高保娇; 门吉英

2015-01-01

以甲基丙烯酸缩水甘油酯(GMA)和甲基丙烯酸甲酯(MMA)的交联共聚微球 GMA/MMA 为基质，经过几步大分子反应在微球表面合成与固载了 N-羟基邻苯二甲酰亚胺(NHPI)，形成固载有 NHPI 的聚合物微球GMA/MMA-NHPI。将 GMA/MMA-NHPI 与 Co(OAc)2组成共催化体系，用于分子氧氧化苯甲醇的反应过程。研究结果表明，GMA/MMA-NHPI与Co(OAc)2所构成的共催化体系在温和条件（65℃和常压氧气）下可有效地实现苯甲醇的分子氧氧化过程，将其深度氧化为苯甲酸，显示出较好的催化活性和高的选择性(苯甲酸的选择性为96%)。主催化剂GMA/MMA-NHPI固载的NHPI与助催化剂Co(OAc)2适宜的摩尔比为20：1；主催化剂所含NHPI的摩尔分数为底物的10%时催化剂的用量比较适宜。固体催化剂GMA/MMA-NHPI还具有良好的再循环使用性能。%Crosslinked polymeric microspheres GMA/MMA of glycidyl methacrylate (GMA) and methyl methacrylate (MMA) were prepared, and then N-hydroxyphthalimide (NHPI) was synthesized and immobilized on GMA/MMA microspheres through several polymer reaction steps, resulting in the functionalized microspheres GMA/MMA-NHPI. The solid catalyst GMA/MMA-NHPI in combination with Co(OAc)2 was used in aerobic oxidation of benzyl alcohol. Experimental results showed that the composite catalyst consisting of GMA/MMA-NHPI and Co(OAc)2 could effectively catalyze aerobic oxidation of benzyl alcohol by molecular oxygen under mild conditions (65℃ and normal pressure). Benzyl alcohol was deeply oxidized to benzoic acid. Although benzyl alcohol conversion rate was not very high, catalytic activity was satisfactory and benzoic acid selectivity was as high as 96%. The appropriate molar ratio of immobilized NHPI on GMA/MMA-NHPI microspheres to Co(OAc)2 was 20:1, and the appropriate amount of GMA/MMA-NHPI was 10% (mol) of the substrate. The solid catalyst GMA/MMA-NHPI microspheres showed good recycling and reusing

Impacts of Built-Up Area Expansion in 2D and 3D on Regional Surface Temperature

Directory of Open Access Journals (Sweden)

Hongyan Cai

2017-10-01

Full Text Available Many studies have reported the thermal effects of urban expansion from non-built-up land; however, how changes in building height in built-up land influence the regional thermal environment is still uncertain. Thus, taking the transitional region between the Chinese megacities of Beijing and Tianjin as the study area, this study investigated the impacts of built-up land expansion in 2D and 3D on regional land surface temperature (LST. The expansion in 2D refers to the conversion from non-built-up land to built-up land, whereas the expansion in 3D characterized the building height change in the built-up land, referring to the conversion from low- and moderate-rise building (LMRB to high-rise building (HRB lands. The land use change from 2010 to 2015 was manually interpreted from high spatial resolution SPOT5 and Gaofen2 images, and the LST information in the corresponding period was derived from Landsat5/8 thermal images using an image-based method. The results showed that between 2010 and 2015, approximately 87.25 km2 non-built-up land was transformed to built-up land, and 13.21 km2 LMRB land was built into HRB land. These two types of built-up land expansions have induced opposing thermal effects in regard to regional surface temperature. The built-up land expansions from cropland and urban green land have raised the regional LST. However, the built-up land expansion from LMRB to HRB lands has induced a cooling effect. Thus, this study suggested that for the cooling urban design, the building height should also be considered. Furthermore, for future studies on thermal impacts of urbanization, it should be cautioned that, besides the urban area expansion, the building height change should also be emphasized due to its potential cooling effects.

Production of sorption-active polypropylene fibers by radiation-induce grafting of glycidyl methacrylate as a precursor monomer

International Nuclear Information System (INIS)

Bondar, Yu.V.; Kim, H.J.; Lim, Y.J.; Kravets, L.I.

2004-01-01

Full text: Two types of sorption-active polypropylene fiber carrying strong-acid sulfonate groups and amino groups have been synthesized by radiation-induced graft polymerization of glycidyl methacrylate (GMA) with subsequent chemical modification of the epoxy groups of poly-GMA graft chains. The effect of various polymerization parameters on the GMA grafting degree was investigated in detail. The epoxy ring-opening of poly-GMA graft chains with introduction of strong-acid sulfonate groups was carried out with sodium hydrogen sulfite in water-dimethylformamide solution at 70 o C. The main peculiarities of the sulfonation reaction in depending on the reaction time and GMA grafting degree have been investigated. It was shown that for the samples with GMA grafting degree more than 50% two simultaneous processes take place during the sulfonation reaction, namely the incorporation of the sulfonate groups via opening of the GMA epoxy-rings as well as hydrolysis of the GMA epoxy-rings with the formation of α-glycol groups. Amine groups were incorporated by treatment of GMA-grafted polypropylene fibers with excess of diethylene triamine reagent. The conversion of the epoxy groups into the functional groups was investigated as a function of the degree of GMA grafting and reaction time. The ion-exchange characteristics of obtained sorption-active polypropylene fibers were determined

Production of sorption-active polypropylene fiber by radiation-induce grafting of glycidyl methacrylate as a precursor monomer

International Nuclear Information System (INIS)

Bondar, Yu.V.; Kim, H.J.; Lim, Y.J.; Kravets, L.I.

2004-01-01

Two types of sorption-active polypropylene fiber carrying strong-acid sulfonate groups and amino groups have been synthesized by radiation-induced graft polymerization of glycidyl methacrylate (GMA) with subsequent chemical modification of the epoxy groups of poly-GMA graft chains. The effect of various polymerization parameters on the GMA grafting degree was investigated in detail. The epoxy ring-opening of poly-GMA graft chains with introduction of strong-acid sulfonate groups was carried out with sodium hydrogen sulfite in water-dimethylformamide solution at 70 o C. The main peculiarities of the sulfonation reaction in depending on the reaction time and GMA grafting degree have been investigated. It was shown that for the samples with GMA grafting degree more than 50% two simultaneous processes take place during the sulfonation reaction, namely the incorporation of the sulfonate groups via opening of the GMA epoxy-rings as well as hydrolysis of the GMA epoxy-rings with the formation of α-glycol groups. Amine groups were incorporated by treatment of GMA-grafted polypropylene fibers with excess of diethylene triamine reagent. The conversion of the epoxy groups into the functional groups was investigated as a function of the degree of GMA grafting and reaction time. The ion-exchange characteristics of obtained sorption-active polypropylene fibers were determined. (author)

TH-AB-209-07: High Resolution X-Ray-Induced Acoustic Computed Tomography

Energy Technology Data Exchange (ETDEWEB)

Xiang, L; Tang, S [University of Oklahoma, Norman, OK (United States); Ahmad, M [Stanford University, Palo Alto, CA (United States); Xing, L [Stanford University School of Medicine, Stanford, CA (United States)

2016-06-15

Purpose: X-ray radiographic absorption imaging is an invaluable tool in medical diagnostics, biology and materials science. However, the use of conventional CT is limited by two factors: the detection sensitivity to weak absorption material and the radiation dose from CT scanning. The purpose of this study is to explore X-ray induced acoustic computed tomography (XACT), a new imaging modality, which combines X-ray absorption contrast and high ultrasonic resolution to address these challenges. Methods: First, theoretical models was built to analyze the XACT sensitivity to X-ray absorption and calculate the minimal radiation dose in XACT imaging. Then, an XACT system comprised of an ultrashort X-ray pulse, a low noise ultrasound detector and a signal acquisition system was built to evaluate the X-ray induced acoustic signal generation. A piece of chicken bone and a phantom with two golden fiducial markers were exposed to 270 kVp X-ray source with 60 ns exposure time, and the X-ray induced acoustic signal was received by a 2.25MHz ultrasound transducer in 200 positions. XACT images were reconstructed by a filtered back-projection algorithm. Results: The theoretical analysis shows that X-ray induced acoustic signals have 100% relative sensitivity to X-ray absorption, but not to X-ray scattering. Applying this innovative technology to breast imaging, we can reduce radiation dose by a factor of 50 compared with newly FDA approved breast CT. The reconstructed images of chicken bone and golden fiducial marker phantom reveal that the spatial resolution of the built XACT system is 350µm. Conclusion: In XACT, the imaging sensitivity to X-ray absorption is improved and the imaging dose is dramatically reduced by using ultrashort pulsed X-ray. Taking advantage of the high ultrasonic resolution, we can also perform 3D imaging with a single X-ray pulse. This new modality has the potential to revolutionize x-ray imaging applications in medicine and biology.

X-1E on Lakebed

Science.gov (United States)

1955-01-01

The Bell Aircraft Corporation X-1E in 1955 on the Rogers Dry Lakebed near the NACA High-Speed Flight Station, Edwards, California. The X-1E was notable for being shorter, with a thinner wing than the X-1A, -B, and -D. Aerodynamic heating caused the ailerons, rudder, and elevators to remain unpainted throughout the X-1E's flight test program. When the ventral fins were added, they were left unpainted too. On August 31, 1956, the aircraft reached a top speed of 1,480 miles per hour (Mach 2.24). There were four versions of the Bell X-1 rocket-powered research aircraft that flew at the NACA High-Speed Flight Research Station, Edwards, California. The bullet-shaped X-1 aircraft were built by Bell Aircraft Corporation, Buffalo, N.Y. for the U.S. Army Air Forces (after 1947, U.S. Air Force) and the National Advisory Committee for Aeronautics (NACA). The X-1 Program was originally designated the XS-1 for EXperimental Supersonic. The X-1's mission was to investigate the transonic speed range (speeds from just below to just above the speed of sound) and, if possible, to break the 'sound barrier.' Three different X-1s were built and designated: X-1-1, X-1-2 (later modified to become the X-1E), and X-1-3. The basic X-1 aircraft were flown by a large number of different pilots from 1946 to 1951. The X-1 Program not only proved that humans could go beyond the speed of sound, it reinforced the understanding that technological barriers could be overcome. The X-1s pioneered many structural and aerodynamic advances including extremely thin, yet extremely strong wing sections; supersonic fuselage configurations; control system requirements; powerplant compatibility; and cockpit environments. The X-1 aircraft were the first transonic-capable aircraft to use an all-moving stabilizer. The flights of the X-1s opened up a new era in aviation. The first X-1 was air-launched unpowered from a Boeing B-29 Superfortress on January 25, 1946. Powered flights began in December 1946. On October 14

Monitoring the expansion of built-up areas in Seberang Perai region, Penang State, Malaysia

International Nuclear Information System (INIS)

Samat, N

2014-01-01

Rapid urbanization has caused land use transformation and encroachment of built environment into arable agriculture land. Uncontrolled expansion could bring negative impacts to society, space and the environment. Therefore, information on expansion and future spatial pattern of built-up areas would be useful for planners and decision makers in formulating policies towards managing and planning for sustainable urban development. This study demonstrates the usage of Geographic Information System in monitoring the expansion of built-up area in Seberang Perai region, Penang State, Malaysia. Built-up area has increased by approximately 20% between 1990 and 2001 and further increased by 12% between 2001 and 2007. New development is expected to continue encroach into existing open space and agriculture area since those are the only available land in this study area. The information on statistics of the expansion of built-up area and future spatial pattern of urban expansion were useful in planning and managing urban spatial growth

Techniques for automating the process of as-built reconciliation

International Nuclear Information System (INIS)

Skruch, B.R.; Brandt, G.B.; Denes, L.J.

1984-01-01

Techniques are being developed for acquisition, recording, and evaluation of as-built measurements of piping systems in nuclear power plants. The goal is to improve the efficiency with which as-built dimensions and configuration can be compared to as-designed dimensions and configuration. The approach utilizes an electronic digital ''ruler'' capable of measuring distances to 100 feet with a resolution of 1/100 of a foot. This ruler interfaces to a hand held computer. This ''electronic notebook'' also accepts alpha-numeric input from a keyboard and replaces a clipboard and pencil currently used. The electronic notebook, in turn, can transfer its data directly to a host mini or mainframe computer. Once the data is resident on the larger computer it is converted to a format compatible with an existing database system used for piping analysis and design. Using accepted tolerances for as-built deviations, the as-built data is then automatically compared to as-designed data. If reanalysis is required, the as-built data is in a compatible format to utilize existing computer analysis codes. This paper discusses the operation and interfacing of the electronic ruler, the general design of the data structures in the electronic notebook, the design of mini-computer software, and the results of preliminary testing of the system

Initial operation of the CW 8X H- ion source discharge

International Nuclear Information System (INIS)

Smith, H.V. Jr.; Allison, P.; Geisik, C.; Schmitt, D.R.; Schneider, J.D.; Stelzer, J.E.

1993-01-01

A pulsed 8X source was built and the H - beam current, emittance, and power efficiency were measured. These results were promising, so a cooled, dc version designed for operation at arc power levels up to 30 kW was built. Testing of the CW 8X source discharge is underway. The design dc power loading on the cathode surface is 900 W/cm 2 , considerably higher than achieved in any previous Penning surface-plasma source (SPS). Thus, the electrode surfaces are cooled with pressurized, hot water. The authors describe the source and present the initial operating experience and arc test results

Complementary X-ray and neutron radiography study of the initial lithiation process in lithium-ion batteries containing silicon electrodes

Energy Technology Data Exchange (ETDEWEB)

Sun, Fu, E-mail: fu.sun@helmholtz-berlin.de [Institute of Material Science and Technologies, Technical University Berlin, 10623 Berlin (Germany); Helmholtz Centre Berlin for Materials and Energy, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Markötter, Henning [Institute of Material Science and Technologies, Technical University Berlin, 10623 Berlin (Germany); Helmholtz Centre Berlin for Materials and Energy, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Manke, Ingo; Hilger, André [Helmholtz Centre Berlin for Materials and Energy, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Alrwashdeh, Saad S. [Institute of Material Science and Technologies, Technical University Berlin, 10623 Berlin (Germany); Helmholtz Centre Berlin for Materials and Energy, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Mechanical Engineering Department, Faculty of Engineering, Mu' tah University, P.O. Box 7, Al-Karak 61710 Jordan (Jordan); Kardjilov, Nikolay [Helmholtz Centre Berlin for Materials and Energy, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Banhart, John [Institute of Material Science and Technologies, Technical University Berlin, 10623 Berlin (Germany); Helmholtz Centre Berlin for Materials and Energy, Hahn-Meitner-Platz 1, 14109 Berlin (Germany)

2017-03-31

Highlights: • A radiography cell for in operando X-ray radiography was designed and built. • A self-assembled CR2032 coin cell was built for in operando neutron radiography. • In operando X-ray and neuron radiography were conducted by using Si electrode half cells. - Abstract: Complementary in operando X-ray radiography and neutron radiography measurements were conducted to investigate and visualize the initial lithiation in silicon-electrode lithium-ion batteries. By means of X-ray radiography, a significant volume expansion of Si particles and the Si electrode during the first discharge was observed. In addition, many Si particles were found that never undergo electrochemical reactions. These findings were confirmed by neutron radiography, which, for the first time, showed the process of Li alloying with the Si electrode during initial lithiation. These results demonstrate that complementary X-ray and neutron radiography is a powerful tool to investigate the lithiation mechanisms inside Si-electrode based lithium-ion batteries.

X-ray transport and radiation response assessment (XTRRA) experiments at the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Fournier, K. B., E-mail: fournier2@llnl.gov; Brown, C. G.; Yeoman, M. F.; Compton, S.; Holdener, F. R.; Kemp, G. E.; Blue, B. E. [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94551 (United States); Fisher, J. H.; Newlander, C. D.; Gilliam, R. P.; Froula, N. [Fifth Gait Technologies, Inc., 14040 Camden Circle, Huntsville, Alabama 35803 (United States); Seiler, S. W.; Davis, J. F.; Lerch, MAJ. A. [Defense Threat Reduction Agency, 8725 John J. Kingman Road, Fort Belvoir, Virginia 22060-6201 (United States); Hinshelwood, D. [Naval Research Laboratory, 4555 Overlook Ave. SW, Washington, DC 20375 (United States); Lilly, M. [Dynasen, Inc., 20 Arnold Pl., Goleta, California 93117 (United States)

2016-11-15

Our team has developed an experimental platform to evaluate the x-ray-generated stress and impulse in materials. Experimental activities include x-ray source development, design of the sample mounting hardware and sensors interfaced to the National Ignition Facility’s diagnostics insertion system, and system integration into the facility. This paper focuses on the X-ray Transport and Radiation Response Assessment (XTRRA) test cassettes built for these experiments. The test cassette is designed to position six samples at three predetermined distances from the source, each known to within ±1% accuracy. Built-in calorimeters give in situ measurements of the x-ray environment along the sample lines of sight. The measured accuracy of sample responses as well as planned modifications to the XTRRA cassette is discussed.

Imaging Performance Analysis of Simbol-X with Simulations

Science.gov (United States)

Chauvin, M.; Roques, J. P.

2009-05-01

Simbol-X is an X-Ray telescope operating in formation flight. It means that its optical performances will strongly depend on the drift of the two spacecrafts and its ability to measure these drifts for image reconstruction. We built a dynamical ray tracing code to study the impact of these parameters on the optical performance of Simbol-X (see Chauvin et al., these proceedings). Using the simulation tool we have developed, we have conducted detailed analyses of the impact of different parameters on the imaging performance of the Simbol-X telescope.

Imaging Performance Analysis of Simbol-X with Simulations

International Nuclear Information System (INIS)

Chauvin, M.; Roques, J. P.

2009-01-01

Simbol-X is an X-Ray telescope operating in formation flight. It means that its optical performances will strongly depend on the drift of the two spacecrafts and its ability to measure these drifts for image reconstruction. We built a dynamical ray tracing code to study the impact of these parameters on the optical performance of Simbol-X (see Chauvin et al., these proceedings). Using the simulation tool we have developed, we have conducted detailed analyses of the impact of different parameters on the imaging performance of the Simbol-X telescope.

49 CFR 41.117 - Buildings built with Federal assistance.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Buildings built with Federal assistance. 41.117 Section 41.117 Transportation Office of the Secretary of Transportation SEISMIC SAFETY § 41.117 Buildings built with Federal assistance. (a) Each DOT Operating Administration assisting in the financing, through...

Public Health Engineering for the Built Environment: Completing Sustainability

NARCIS (Netherlands)

Bronswijk, van J.E.M.H.; Koren, L.G.H.; Pernot, C.E.E.; Vliet, van A.A.M.; Rameckers, E.M.A.L.; Erkelens, P.A.; Jonge, de S.; Vliet, van A.A.M.

2000-01-01

Good health is a prerequisite for sustainable development. From ancient times on environments are built with the good of man in mind, especially to extend his vital life span. At first most building could be considered as public health engineering. Built environments, however, always posed new risks

The reciprocity law concerning light dose relationships applied to BisGMA/TEGDMA photopolymers: theoretical analysis and experimental characterization.

Science.gov (United States)

Wydra, James W; Cramer, Neil B; Stansbury, Jeffrey W; Bowman, Christopher N

2014-06-01

A model BisGMA/TEGDMA unfilled resin was utilized to investigate the effect of varied irradiation intensity on the photopolymerization kinetics and shrinkage stress evolution, as a means for evaluation of the reciprocity relationship. Functional group conversion was determined by FTIR spectroscopy and polymerization shrinkage stress was obtained by a tensometer. Samples were polymerized with UV light from an EXFO Acticure with 0.1wt% photoinitiator. A one-dimensional kinetic model was utilized to predict the conversion-dose relationship. As irradiation intensity increased, conversion decreased at a constant irradiation dose and the overall dose required to achieve full conversion increased. Methacrylate conversion ranged from 64±2% at 3mW/cm(2) to 78±1% at 24mW/cm(2) while the final shrinkage stress varied from 2.4±0.1MPa to 3.0±0.1MPa. The ultimate conversion and shrinkage stress levels achieved were dependent not only upon dose but also the irradiation intensity, in contrast to an idealized reciprocity relationship. A kinetic model was utilized to analyze this behavior and provide theoretical conversion profiles versus irradiation time and dose. Analysis of the experimental and modeling results demonstrated that the polymerization kinetics do not and should not be expected to follow the reciprocity law behavior. As irradiation intensity is increased, the overall dose required to achieve full conversion also increased. Further, the ultimate conversion and shrinkage stress that are achieved are not dependent only upon dose but rather upon the irradiation intensity and corresponding polymerization rate. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Considering space weather forces interaction on human health: the equilibrium paradigm in clinical cosmobiology - is it equal?

Science.gov (United States)

Stoupel, Eliyahu

2015-03-01

We are constantly affected by changes in space weather. The principal "players" are solar activity (SA), geomagnetic activity (GMA) and antagonistic to them, cosmic ray activity (CRA) and high energy proton flux. CRA is measured by neutron activity on the earth's surface in imp/min. SA and GMA are linked and serve as a shield for the earth from CRA. For a long time SA and GMA were the main areas of studies. The aim of this study was to compare some effects of the mentioned forces and discuss the temporal distribution of both groups of space weather, in relation to their effects on humans. The time distribution of GMA storms (daily) was compared with quiet (low) GMA, with higher CRA (neutron activity). Space weather data were obtained from the USA, Russia and Finland. A total of 4383 days were analyzed in the years 2000-2012. A total of 71 days (1.62%) of geomagnetic storms (GS) and 2753 days (63.8%) of quiet (I0) GMA were registered. A second study was provided including the years 1983-2007 (9131 days); here 3800 days (41.62%) were quiet GMA days and 400 storm days (4.38%). According to publications in the medical literature, many phenomena are connected with the extremes of space weather. Despite a great number of publications and the significant role of GS, it is a relatively rare event and most medical emergencies and deaths occur on days of low GMA, accompanied by higher CRA (neutron activity). High neutron activity deserves more attention when analyzing space effects on human health and their mechanism of action.

The characteristics of purpose built offices in Malaysia: a review of issues

OpenAIRE

Mohd Safian, Edie Ezwan; Bagdad, Mariati; Nawawi, Abdul Hadi

2011-01-01

The development of purpose-built office market in Malaysia is basically determined by a supply-demand market. Since the purpose built office market in Malaysia has shown positive developments and increasing level of competitiveness, many building and locational characteristics have emerged and become important during the process of assessment of the office property involving property market appraisal and building performance evaluation. With these characteristics, property market participants...

Synthesis and characterization of monosize magnetic poly(glycidyl methacrylate) beads

Institute of Scientific and Technical Information of China (English)

Evrim Banu Alt1nta(s); Lokman Uzun; Adil Denizli

2007-01-01

Monosize, 1.6 μm, magnetic beads of poly(glycidyl methacrylate) [M-poly(GMA)], were prepared by dispersion polymerization in the presence of Fe3O4 nano-powder. Monosize M-poly(GMA) beads were characterized by swelling tests, density measurements, electron spin resonance (ESR), vibrating sample magnetometer (VSM) and scanning electron microscopy (SEM). The characteristic functional groups of M-poly(GMA)beads were analyzed by Fourier transform infrared spectrometer (FTIR). The M-poly(GMA) beads are highly uniform in size and have a spherical shape and non-porous structure. Polydispersity index (PDI) of M-poly(GMA) beads was calculated to be around 1.008. The hydrated density of the M-poly(GMA) beads measured at 25 ℃ was 1.14 g/cm3. The content of oxirane groups on the surface of the M-poly(GMA) sample was found to be 3.46 mmol/g by using perchloric acid titration. The specific surface area of the M-poly(GMA) beads was determined to be 3.2 m2/g.The equilibrium swelling ratio was 52%. The volume fraction of magnetite nanopowder in the M-poly(GMA) beads was found to be 4.5%. The g factor, that can be considered as a quantity characteristic of the molecules in which the unpaired electrons are located, was found to be 2.28for M-poly(GMA). The external magnetic field at resonance was calculated to be 2055 Gs which was found sufficient to excite all of the dipole moments present in 1.0 g of M-poly(GMA) sample.

Chemical pressure induced change in multiferroicity of Bi{sub 1+2x}Gd{sub 2x/2}Fe{sub 1−2x}O{sub 3} bulk ceramics

Energy Technology Data Exchange (ETDEWEB)

Pradhan, S.K. [Institute of Materials Science, Bhubaneswar 751013 Odisha (India); Center for Materials Research, Norfolk State University, Norfolk (United States); Sahu, D.R., E-mail: diptirs@yahoo.com [Institute of Materials Science, Bhubaneswar 751013 Odisha (India); Department of Natural and Applied Science, Namibia University of Science and Technology, Windhoek (Namibia); Rout, P.P.; Das, S.K. [Institute of Materials Science, Bhubaneswar 751013 Odisha (India); Pradhan, A.K. [Center for Materials Research, Norfolk State University, Norfolk (United States); Srinivasu, V.V. [Department of Physics, University of South Africa (South Africa); Roul, B.K., E-mail: ims@iopb.res.in [Institute of Materials Science, Bhubaneswar 751013 Odisha (India)

2017-04-01

We have optimized Gd ion substitution in BiFeO{sub 3} (BFO) and observed prominently change in structural, electrical and magnetic behavior of Bi{sub 1+2x}Gd{sub 2x/2}Fe{sub 1−2x}O{sub 3} ceramics synthesized through slow step sintering schedule. It is observed that with the increase in concentration of Gd (x=0.1), original structure of BFO is transformed from rhombohedral R3c space group to orthorhombic Pn21a space group. Surprisingly, unit cell volume is drastically contracted (35% for x=0.2) and the sintered specimen showed enhanced room temperature ferromagnetic behavior although the original BFO is normally G-type antiferromagnetic in nature at 643 K. It is expected that intrinsic chemical pressure within the bulk body built by the substitution of Gd in presence of excess bismuth greatly supported through unidirectional movement of electrical dipole moment with in each individual domain as a result of which suppression of leakage current with enhanced dielectric and ferroelectric hysteresis is observed.

External built residential environment characteristics that affect mental health of adults.

Science.gov (United States)

Ochodo, Charles; Ndetei, D M; Moturi, W N; Otieno, J O

2014-10-01

External built residential environment characteristics include aspects of building design such as types of walls, doors and windows, green spaces, density of houses per unit area, and waste disposal facilities. Neighborhoods that are characterized by poor quality external built environment can contribute to psychosocial stress and increase the likelihood of mental health disorders. This study investigated the relationship between characteristics of external built residential environment and mental health disorders in selected residences of Nakuru Municipality, Kenya. External built residential environment characteristics were investigated for 544 residents living in different residential areas that were categorized by their socioeconomic status. Medically validated interview schedules were used to determine mental health of residents in the respective neighborhoods. The relationship between characteristics of the external built residential environment and mental health of residents was determined by multivariable logistic regression analyses and chi-square tests. The results show that walling materials used on buildings, density of dwelling units, state of street lighting, types of doors, states of roofs, and states of windows are some built external residential environment characteristics that affect mental health of adult males and females. Urban residential areas that are characterized by poor quality external built environment substantially expose the population to daily stressors and inconveniences that increase the likelihood of developing mental health disorders.

Tools for estimating VMT reductions from built environment changes.

Science.gov (United States)

2013-06-01

Built environment characteristics are associated with walking, bicycling, transit use, and vehicle : miles traveled (VMT). Developing built environments supportive of walking, bicycling, and transit use : can help meet state VMT reduction goals. But ...

Image-Based Delineation and Classification of Built Heritage Masonry

Directory of Open Access Journals (Sweden)

Noelia Oses

2014-02-01

Full Text Available Fundación Zain is developing new built heritage assessment protocols. The goal is to objectivize and standardize the analysis and decision process that leads to determining the degree of protection of built heritage in the Basque Country. The ultimate step in this objectivization and standardization effort will be the development of an information and communication technology (ICT tool for the assessment of built heritage. This paper presents the ground work carried out to make this tool possible: the automatic, image-based delineation of stone masonry. This is a necessary first step in the development of the tool, as the built heritage that will be assessed consists of stone masonry construction, and many of the features analyzed can be characterized according to the geometry and arrangement of the stones. Much of the assessment is carried out through visual inspection. Thus, this process will be automated by applying image processing on digital images of the elements under inspection. The principal contribution of this paper is the automatic delineation the framework proposed. The other contribution is the performance evaluation of this delineation as the input to a classifier for a geometrically characterized feature of a built heritage object. The element chosen to perform this evaluation is the stone arrangement of masonry walls. The validity of the proposed framework is assessed on real images of masonry walls.

The microbiome of the built environment and mental health.

Science.gov (United States)

Hoisington, Andrew J; Brenner, Lisa A; Kinney, Kerry A; Postolache, Teodor T; Lowry, Christopher A

2015-12-17

The microbiome of the built environment (MoBE) is a relatively new area of study. While some knowledge has been gained regarding impacts of the MoBE on the human microbiome and disease vulnerability, there is little knowledge of the impacts of the MoBE on mental health. Depending on the specific microbial species involved, the transfer of microorganisms from the built environment to occupant's cutaneous or mucosal membranes has the potential to increase or disrupt immunoregulation and/or exaggerate or suppress inflammation. Preclinical evidence highlighting the influence of the microbiota on systemic inflammation supports the assertion that microorganisms, including those originating from the built environment, have the potential to either increase or decrease the risk of inflammation-induced psychiatric conditions and their symptom severity. With advanced understanding of both the ecology of the built environment, and its influence on the human microbiome, it may be possible to develop bioinformed strategies for management of the built environment to promote mental health. Here we present a brief summary of microbiome research in both areas and highlight two interdependencies including the following: (1) effects of the MoBE on the human microbiome and (2) potential opportunities for manipulation of the MoBE in order to improve mental health. In addition, we propose future research directions including strategies for assessment of changes in the microbiome of common areas of built environments shared by multiple human occupants, and associated cohort-level changes in the mental health of those who spend time in the buildings. Overall, our understanding of the fields of both the MoBE and influence of host-associated microorganisms on mental health are advancing at a rapid pace and, if linked, could offer considerable benefit to health and wellness.

Using Green Building As A Model For Making Health Promotion Standard In The Built Environment.

Science.gov (United States)

Trowbridge, Matthew J; Worden, Kelly; Pyke, Christopher

2016-11-01

The built environment-the constructed physical parts of the places where people live and work-is a powerful determinant of both individual and population health. Awareness of the link between place and health is growing within the public health sector and among built environment decision makers working in design, construction, policy, and both public and private finance. However, these decision makers lack the knowledge, tools, and capacity to ensure that health and well-being are routinely considered across all sectors of the built environment. The green building industry has successfully established environmental sustainability as a normative part of built environment practice, policy making, and investment. We explore the value of this industry's experience as a template for promoting health and well-being in the built environment. Project HOPE—The People-to-People Health Foundation, Inc.

The use of environmental impact assessment in protecting the built cultural heritage

DEFF Research Database (Denmark)

Flynn, Errol David

2004-01-01

This article examines the application of the environmental impact assessment as a means of protecting the built and cultural heritage during and after the construction of the new national opera house in the Holmen area of Copenhagen. It assesses the affect the new building has had...... on the surrounding built and cultural heritage and examines how the environmental impact assessment was used during the development process....

Computer-Automated Evolution of Spacecraft X-Band Antennas

Science.gov (United States)

Lohn, Jason D.; Homby, Gregory S.; Linden, Derek S.

2010-01-01

A document discusses the use of computer- aided evolution in arriving at a design for X-band communication antennas for NASA s three Space Technology 5 (ST5) satellites, which were launched on March 22, 2006. Two evolutionary algorithms, incorporating different representations of the antenna design and different fitness functions, were used to automatically design and optimize an X-band antenna design. A set of antenna designs satisfying initial ST5 mission requirements was evolved by use these algorithms. The two best antennas - one from each evolutionary algorithm - were built. During flight-qualification testing of these antennas, the mission requirements were changed. After minimal changes in the evolutionary algorithms - mostly in the fitness functions - new antenna designs satisfying the changed mission requirements were evolved and within one month of this change, two new antennas were designed and prototypes of the antennas were built and tested. One of these newly evolved antennas was approved for deployment on the ST5 mission, and flight-qualified versions of this design were built and installed on the spacecraft. At the time of writing the document, these antennas were the first computer-evolved hardware in outer space.

The effects of the urban built environment on the spatial distribution of lead in residential soils

International Nuclear Information System (INIS)

Schwarz, K.; Pickett, Steward T.A.; Lathrop, Richard G.; Weathers, Kathleen C.; Pouyat, Richard V.; Cadenasso, Mary L.

2012-01-01

Lead contamination of urban residential soils is a public health concern. Consequently, there is a need to delineate hotspots in the landscape to identify risk and facilitate remediation. Land use is a good predictor of some environmental pollutants. However, in the case of soil lead, research has shown that land use is not a useful proxy. We hypothesize that soil lead is related to both individual landscape features at the parcel scale and the landscape context in which parcels are embedded. We sampled soil lead on 61 residential parcels in Baltimore, Maryland using field-portable x-ray fluorescence. Thirty percent of parcels had average lead concentrations that exceeded the USEPA limit of 400 ppm and 53% had at least one reading that exceeded 400 ppm. Results indicate that soil lead is strongly associated with housing age, distance to roadways, and on a parcel scale, distance to built structures. - Highlights: ► We investigated the effect of landscape heterogeneity on lead in residential soil. ► Landscape heterogeneity was considered at two different spatial scales. ► We sampled soil lead on residential parcels using field-portable x-ray fluorescence. ► Soil lead was associated with housing age and distance to roadways and buildings. ► Research has implications for land planning, health policies and predictive models. - We investigated the influence of landscape heterogeneity on lead in residential soil using x-ray fluorescence and identified important correlations with elements of urban land cover.

Adolescents' and young adults' physical activity related to built environment

Directory of Open Access Journals (Sweden)

Armando Cocca

2015-06-01

Full Text Available Objectives. This study aims to analyse physical activity (PA levels of high school and university students; to estimate their perception of built environment with regard to physical PA; and to assess the relation between PA and built environment. Methods. A sociological cross-sectional study with non-experimental design was applied. The International Physical Activity Questionnaire and the Built Environment Characteristics Questionnaire were filled in by a sample of 1.862 students from high schools and the university in Granada, Spain. Results. High school students were significantly more active than university students, the latter reaching insufficient levels of PA. Nevertheless, they consider Granada as a good context for carrying out outdoor exercise. No relations were found between PA levels and built environment. Conclusion. The discrepant outcomes for PA levels and perceived built environment suggest the need of interventions focused on making youth aware of the possibilities that an environment provides to them for exercising. Consequently, environment could have an impact on their health at the same time as youth learn to respect it.

X-ray pore optic developments

Science.gov (United States)

Wallace, Kotska; Bavdaz, Marcos; Collon, Maximilien; Beijersbergen, Marco; Kraft, Stefan; Fairbend, Ray; Séguy, Julien; Blanquer, Pascal; Graue, Roland; Kampf, Dirk

2017-11-01

In support of future x-ray telescopes ESA is developing new optics for the x-ray regime. To date, mass and volume have made x-ray imaging technology prohibitive to planetary remote sensing imaging missions. And although highly successful, the mirror technology used on ESA's XMM-Newton is not sufficient for future, large, x-ray observatories, since physical limits on the mirror packing density mean that aperture size becomes prohibitive. To reduce telescope mass and volume the packing density of mirror shells must be reduced, whilst maintaining alignment and rigidity. Structures can also benefit from a modular optic arrangement. Pore optics are shown to meet these requirements. This paper will discuss two pore optic technologies under development, with examples of results from measurement campaigns on samples. One activity has centred on the use of coated, silicon wafers, patterned with ribs, that are integrated onto a mandrel whose form has been polished to the required shape. The wafers follow the shape precisely, forming pore sizes in the sub-mm region. Individual stacks of mirrors can be manufactured without risk to, or dependency on, each other and aligned in a structure from which they can also be removed without hazard. A breadboard is currently being built to demonstrate this technology. A second activity centres on glass pore optics. However an adaptation of micro channel plate technology to form square pores has resulted in a monolithic material that can be slumped into an optic form. Alignment and coating of two such plates produces an x-ray focusing optic. A breadboard 20cm aperture optic is currently being built.

Altered ion transport in normal human bronchial epithelial cells following exposure to chemically distinct metal welding fume particles.

Science.gov (United States)

Fedan, Jeffrey S; Thompson, Janet A; Meighan, Terence G; Zeidler-Erdely, Patti C; Antonini, James M

2017-07-01

Welding fume inhalation causes pulmonary toxicity, including susceptibility to infection. We hypothesized that airway epithelial ion transport is a target of fume toxicity, and investigated the effects of fume particulates from manual metal arc-stainless steel (MMA-SS) and gas metal arc-mild steel (GMA-MS) on ion transport in normal human bronchial epithelium (NHBE) cultured in air-interface. MMA-SS particles, more soluble than GMA-MS particles, contain Cr, Ni, Fe and Mn; GMA-MS particles contain Fe and Mn. MMA-SS or GMA-MS particles (0.0167-166.7μg/cm 2 ) were applied apically to NHBEs. After 18h transepithelial potential difference (V t ), resistance (R t ), and short circuit current (I sc ) were measured. Particle effects on Na + and Cl¯ channels and the Na + ,K + ,2Cl¯-cotransporter were evaluated using amiloride (apical), 5-nitro-2-[(3-phenylpropyl)amino]benzoic acid (NPPB, apical), and bumetanide (basolateral), respectively. MMA-SS (0.0167-16.7μg/cm 2 ) increased basal V t . Only 16.7μg/cm 2 GMA-MS increased basal V t significantly. MMA-SS or GMA-MS exposure potentiated I sc responses (decreases) to amiloride and bumetanide, while not affecting those to NPPB, GMA-MS to a lesser degree than MMA-SS. Variable effects on R t were observed in response to amiloride, and bumetanide. Generally, MMA-SS was more potent in altering responses to amiloride and bumetanide than GMA-MS. Hyperpolarization occurred in the absence of LDH release, but decreases in V t , R t , and I sc at higher fume particulate doses accompanied LDH release, to a greater extent for MMA-SS. Thus, Na + transport and Na + ,K + ,2Cl¯-cotransport are affected by fume exposure; MMA-MS is more potent than GMA-MS. Enhanced Na + absorption and decreased airway surface liquid could compromise defenses against infection. Published by Elsevier Inc.

Indoor radon in houses built on gravel and sand deposits in southern Finland

Directory of Open Access Journals (Sweden)

Hutri, K.-L.

1993-06-01

Full Text Available Studies by the Finnish Centre for Radiation and Nuclear Safety (STUK have shown that, in Finland, indoor radon concentrations are almost twice as high in houses built on sand or gravel as in houses built on other soil types. The aim of this study was to assess the radon risk on eskers, ice-marginal formations, and other gravel and sand deposits on the basis of factors that can be determined from geological maps. Altogether, 514 houses built on gravel and sand deposits were selected for the study from the indoor radon database of STUK. Several geological parameters were determined. Empirical statistical models were used to assess the significance of factors affecting indoor radon in glaciofluvial deposits and the sand-dominant littoral deposits occurring in association with them. A relationship was found between increased indoor radon concentrations and the location of a house on a steep-sided esker, in the southeastern rapakivi granite area and on the upper slope or top of an esker. The steepness of the slope also increased the radon concentration in houses on steep-sided eskers. The effect of the topographic features is due to subterranean air-flows. As estimated from the very sparse till sampling, the elevated uranium concentration increased the indoor radon concentration only in houses built on littoral deposits around eskers and ice-marginal formations.

Resilience engineering and the built environment

DEFF Research Database (Denmark)

Hollnagel, Erik

2014-01-01

important to understand the range of conditions about why and how the system functions in the desired' mode as well as unwanted' modes. Resilience is the capacity to sustain operations under both expected and unexpected conditions. The unexpected conditions are not only threats but also opportunities.......The possible relations between resilience engineering and built environments are explored. Resilience engineering has been concerned with the safe and efficient functioning of large and small industrial systems. These may be described as built systems or artefacts. The resilience engineering...... approach argues that if the performance of systems is to be resilient, then they must be able to respond, monitor, learn and anticipate. The last ability in particular means that they must be able to consider themselves vis-a-vis their environment, i.e. be sentient and reflective systems. In practice...

A comparison of residual stresses in built-up steel beams using hole-drilling method

International Nuclear Information System (INIS)

Nawafleh, M. A.; Hunaiti, Y. M.; Younes, R. M.

2009-01-01

Residual stresses have a significant effect on the stability resistance of metal building systems. An experimental program was conducted to measure these stresses in built-up steel beams using incremental hole-drilling method. The experimental results reveal that the predicted residual stress type of pattern for built-up I-sections with fillet welds on one side of the web is not the same as the pattern of residual stresses in built-up I-sections with fillet welds on both sides of the web

Secondary-source energy-dispersive x-ray spectrometer

International Nuclear Information System (INIS)

Larsen, R.P.; Tisue, G.T.

1975-01-01

A secondary-source energy-dispersive x-ray spectrometer has been built and tested. In this instrument the primary source of x rays is a tungsten-target tube powered by a high-voltage (75 kV), a high-power (3.7 kW) generator from a wavelength spectrometer (G.E. XRD-6). The primary polychromatic x rays irradiate an elemental foil, the secondary source. Its characteristic essentially monochromatic x rays are used to irradiate the sample. Fluorescent x rays from the sample are detected and resolved by a lithium-drifted silicon detector, multichannel-analyzer system. The design of the instrument provides a convenient means for changing the secondary, and hence, the energy of the excitation radiation

Considering built environment and spatial correlation in modeling pedestrian injury severity.

Science.gov (United States)

Prato, Carlo G; Kaplan, Sigal; Patrier, Alexandre; Rasmussen, Thomas K

2018-01-02

This study looks at mitigating and aggravating factors that are associated with the injury severity of pedestrians when they have crashes with another road user and overcomes existing limitations in the literature by focusing attention on the built environment and considering spatial correlation across crashes. Reports for 6,539 pedestrian crashes occurred in Denmark between 2006 and 2015 were merged with geographic information system resources containing detailed information about the built environment and exposure at the crash locations. A linearized spatial logit model estimated the probability of pedestrians sustaining a severe or fatal injury conditional on the occurrence of a crash with another road user. This study confirms previous findings about older pedestrians and intoxicated pedestrians being the most vulnerable road users and crashes with heavy vehicles and in roads with higher speed limits being related to the most severe outcomes. This study provides novel perspectives by showing positive spatial correlations of crashes with the same severity outcomes and emphasizing the role of the built environment in the proximity of the crash. This study emphasizes the need for thinking about traffic calming measures, illumination solutions, road maintenance programs, and speed limit reductions. Moreover, this study emphasizes the role of the built environment, because shopping areas, residential areas, and walking traffic density are positively related to a reduction in pedestrian injury severity. Often, these areas have in common a larger pedestrian mass that is more likely to make other road users more aware and attentive, whereas the same does not seem to apply to areas with lower pedestrian density.

Quantitative analysis with energy dispersive X-ray fluorescence analyser

International Nuclear Information System (INIS)

Kataria, S.K.; Kapoor, S.S.; Lal, M.; Rao, B.V.N.

1977-01-01

Quantitative analysis of samples using radioisotope excited energy dispersive x-ray fluorescence system is described. The complete set-up is built around a locally made Si(Li) detector x-ray spectrometer with an energy resolution of 220 eV at 5.94 KeV. The photopeaks observed in the x-ray fluorescence spectra are fitted with a Gaussian function and the intensities of the characteristic x-ray lines are extracted, which in turn are used for calculating the elemental concentrations. The results for a few typical cases are presented. (author)

VT Built Up Lands in Grand Isle County - 1986

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) NRCS mapped historical and current-day built-up lands for Grand Isle County, VT using several vintages of aerial photography: 1941, 1962, 1974,...

VT Built Up Lands in Grand Isle County - 1941

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) NRCS mapped historical and current-day built-up lands for Grand Isle County, VT using several vintages of aerial photography: 1941, 1962, 1974,...

Numerical and experimental investigation of NO{sub x} formation in lean premixed combustion of methane

Energy Technology Data Exchange (ETDEWEB)

Bengtsson, K; Benz, P; Marti, T; Schaeren, R; Schlegel, A [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-06-01

A high pressure jet-stirred reactor has been built and employed to investigate NO{sub x} formation in lean premixed combustion of methane/air. Experimental results are compared with numerical predictions using the model of a perfectly stirred reactor and elementary reaction mechanisms. Four reaction mechanisms are considered with respect to NO{sub x} formation. (author) 3 figs., 6 refs.

Improvement of cytocompatibility of polylactide by filling with marine algae powder

Energy Technology Data Exchange (ETDEWEB)

Wu, Tung-Yi [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan (China); Yang, Ming-Chien, E-mail: myang@mail.ntust.edu.tw [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan (China); Hsu, Yi-Chiang [Graduate Institute of Medical Science, College of Health Sciences, Chang Jung Christian University, Tainan 71101, Taiwan (China); Innovative Research Center of Medicine, College of Health Sciences, Chang Jung Christian University, Tainan 71101, Taiwan (China)

2015-05-01

This work evaluated the cytocompatibility, thermal and mechanical properties of composites of polylactide (PLA) and marine algae powder (MAP). To improve the thermal and mechanical properties of PLA–MAP composites, glycidyl methacrylate (GMA) was used as the compatibilizer for the blending of PLA and MAP. The PLA-g-GMA/MAP composites exhibited superior mechanical properties, attributing to higher compatibility between the polymer and MAP, comparing to PLA/MAP composites. The dispersion of MAP in the PLA-g-GMA matrix was highly homogeneous as a result of etherification. The lower melt torque of the PLA-g-GMA/MAP composites also made them more processable than PLA/MAP. To assess the cytocompatibility, normal human foreskin fibroblasts (FBs) were seeded onto each type of the composites. Results of FB proliferation, collagen production, and cytotoxicity assays indicated greater cytocompatibility for the PLA/MAP composites than for the PLA-g-GMA/MAP composites. Furthermore, both PLA/MAP and PLA-g-GMA/MAP composites were more cytocompatible than pure PLA. - Highlights: • PLA was grafted with GMA to form ether bond with marine algae powder (MAP). • Composites of PLA-g-GMA and MAP exhibited cytocompatibility with fibroblasts. • PLA-g-GMA/MAP composites exhibited mechanical properties superior to PLA/MAP. • PLA-g-GMA/MAP composites were more processable than PLA/MAP.

Improvement of cytocompatibility of polylactide by filling with marine algae powder

International Nuclear Information System (INIS)

Wu, Tung-Yi; Yang, Ming-Chien; Hsu, Yi-Chiang

2015-01-01

This work evaluated the cytocompatibility, thermal and mechanical properties of composites of polylactide (PLA) and marine algae powder (MAP). To improve the thermal and mechanical properties of PLA–MAP composites, glycidyl methacrylate (GMA) was used as the compatibilizer for the blending of PLA and MAP. The PLA-g-GMA/MAP composites exhibited superior mechanical properties, attributing to higher compatibility between the polymer and MAP, comparing to PLA/MAP composites. The dispersion of MAP in the PLA-g-GMA matrix was highly homogeneous as a result of etherification. The lower melt torque of the PLA-g-GMA/MAP composites also made them more processable than PLA/MAP. To assess the cytocompatibility, normal human foreskin fibroblasts (FBs) were seeded onto each type of the composites. Results of FB proliferation, collagen production, and cytotoxicity assays indicated greater cytocompatibility for the PLA/MAP composites than for the PLA-g-GMA/MAP composites. Furthermore, both PLA/MAP and PLA-g-GMA/MAP composites were more cytocompatible than pure PLA. - Highlights: • PLA was grafted with GMA to form ether bond with marine algae powder (MAP). • Composites of PLA-g-GMA and MAP exhibited cytocompatibility with fibroblasts. • PLA-g-GMA/MAP composites exhibited mechanical properties superior to PLA/MAP. • PLA-g-GMA/MAP composites were more processable than PLA/MAP

Simplification of integrity constraints with aggregates and arithmetic built-ins

DEFF Research Database (Denmark)

Martinenghi, Davide

2004-01-01

Both aggregates and arithmetic built-ins are widely used in current database query languages: Aggregates are second-order constructs such as CNT and SUM of SQL; arithmetic built-ins include relational and other mathematical operators that apply to numbers, such as < and +. These features are also...... time, simplified versions of such integrity constraints that can be tested before the execution of any update. In this way, virtually no time is spent for optimization or rollbacks at run time. Both set and bag semantics are considered....... of interest in the context of database integrity constraints: correct and efficient integrity checking is crucial, as, without any guarantee of data consistency, the answers to queries cannot be trusted. In this paper we propose a method of practical relevance that can be used to derive, at database design...

The development for small scale soft X-ray spectrometer

International Nuclear Information System (INIS)

Sun Kexu; Jiang Shaoen; Yi Rongqing; Cui Yanli

2004-12-01

For the development of small-scale soft X-ray spectrometer, first, some small-scale soft X-ray detection elements are developed, it is included GaAs irradiated with neutron, GaAs irradiated with proton, multi-layer mirror, plane mirror and small scale X-ray diode et al. Soft X-ray spectrometers built of multi-layer mirror-GaAs (with neutron irradiation), and plane mirror-small-scale XRD, and plane mirror-GaAs (with proton irradiation) are prepared. These spectrometers are examined in Shen Guang-II laser facility, and some external estimation are given. (authors)

Built Environment Wind Turbine Roadmap

Energy Technology Data Exchange (ETDEWEB)

Smith, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Forsyth, T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sinclair, K. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Oteri, F. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2012-11-01

The market currently encourages BWT deployment before the technology is ready for full-scale commercialization. To address this issue, industry stakeholders convened a Rooftop and Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the National Wind Technology Center, located at the U.S. Department of Energy’s National Renewable Energy Laboratory in Boulder, Colorado. This report summarizes the workshop.

Urban wind turbines. Guidelines for small wind turbines in the built environment

International Nuclear Information System (INIS)

Cace, J.; Ter Horst, E.; Syngellakis, K.; Niel, M.; Clement, P.; Heppener, R.; Peirano, E.

2007-02-01

The objective of the WINEUR project (Wind Energy Integration in the Urban Environment) is to determine the deployability of small wind turbines in built environments while identifying the current significant constraints and possible solutions. The purpose of this document is to Inform the stakeholders about the state of the development of small wind turbines for the built environment; Provide practical guidelines to actors dealing with installation of small wind turbines in urban areas; and Provide recommendations for future products and for market development

Development of sustainable georesources for the built environment in the United Kingdom

Directory of Open Access Journals (Sweden)

McMillan, Andrew A.

2008-06-01

Full Text Available The character of the UK’s built heritage has been largely determined by the country’s diverse geology. Indigenous natural stone forms a major component of the nation’s pre-1919 building stock. Stone has been used traditionally for roofing, roads, pavements, bridges, engineering works, and all forms of walling. Today it is mostly employed as thin panel cladding to concrete frameworks in modern construction and is now increasingly being used in large volumes for new city streetscapes.This paper outlines the material requirements for the repair and maintenance of the stone-built heritage and illustrates a range of initiatives across the UK aimed at safeguarding and redeveloping indigenous resources. The importance, particularly for the repair and conservation sector, of selecting appropriate replacement stone is being recognized by architectural and conservation professionals and by local authority officials. There is also increasing recognition of the importance to the economy of the local character of the built environment in terms of its value to tourism and to architectural, historical, and cultural identity. The paper also examines the historical sources of information on stone in the UK and offers recommendations for databasing and disseminating stone resource information. This may assist the redevelopment of a healthy indigenous stone industry and ensure that the unique built heritage character of the UK is maintained and enhanced.

Effects of molecular structure of the resins on the volumetric shrinkage and the mechanical strength of dental restorative composites.

Science.gov (United States)

Kim, L U; Kim, J W; Kim, C K

2006-09-01

To prepare a dental composite that has a low amount of curing shrinkage and excellent mechanical strength, various 2,2-bis[4-(2-hydroxy-3-methacryloyloxy propoxy) phenyl] propane (Bis-GMA) derivatives were synthesized via molecular structure design, and afterward, properties of their mixtures were explored. Bis-GMA derivatives, which were obtained by substituting methyl groups for hydrogen on the phenyl ring in the Bis-GMA, exhibited lower curing shrinkage than Bis-GMA, whereas their viscosities were higher than that of Bis-GMA. Other Bis-GMA derivatives, which contained a glycidyl methacrylate as a molecular end group exhibited reduced curing shrinkage and viscosity. Methoxy substitution for hydroxyl groups on the Bis-GMA derivatives was performed for the further reduction of the viscosity and curing shrinkage. Various resin mixtures, which had the same viscosity as the commercial one, were prepared, and their curing shrinkage was examined. A resin mixture containing 2,2-bis[3,5-dimethyl, 4-(2-methoxy-3-methacryloyloxy propoxy) phenyl] propane] (TMBis-M-GMA) as a base resin and 4-tert-butylphenoxy-2-methyoxypropyl methacrylate (t-BP-M-GMA) as a diluent exhibited the lowest curing shrinkage among them. The composite prepared from this resin mixture also exhibited the lowest curing shrinkage along with enhanced mechanical properties.

RED or READ: the built environment is colored

Science.gov (United States)

Smith, Dianne

2002-06-01

How important is color in the design of our built environment? Prototypes and massing models for designs are often presented in white or monochromatic combinations, irrespective of the materials incorporated and the colors that may be applied in the final constructed building, interior or object. Therefore, it is of interest to identify the way color is positioned by designers in how they go about the business of making environments. The built environment is understood by the designers and design researchers generally in one of four fields - as object, as product, as communicator, or as social domain. In addition, Franz identified four conceptions of designing held by designers - the experiential conception, the structural conception, the production conception and the retail conception. Fashion and style are often associated with color in a local context and may simply be applied to the physical environment because it is in fashion, rather than because of what it communicates more broadly. It is assumed that the integration of color in the built environment is influenced by these understandings. In order to address color's position in the design process and the importance of color in relation to space, form, and the experience of place, a selection of Queensland architects and interior designers were surveyed. The study is not conclusive, however, it does identify differences and commonalities between the participants that are of interest in light of the above issues. Explorations into environmental meaning, in addition to color theory and decorative applications, are hypothesized to be important sources of information for designers involved in the coloration of the built environment.

Microgeographic variation in locomotor traits among lizards in a human-built environment

Directory of Open Access Journals (Sweden)

Colin Donihue

2016-03-01

Full Text Available Microgeographic variation in fitness-relevant traits may be more common than previously appreciated. The fitness of many vertebrates is directly related to their locomotor capacity, a whole-organism trait integrating behavior, morphology, and physiology. Because locomotion is inextricably related to context, I hypothesized that it might vary with habitat structure in a wide-ranging lizard, Podarcis erhardii, found in the Greek Cyclade Islands. I compared lizard populations living on human-built rock walls, a novel habitat with complex vertical structure, with nearby lizard populations that are naive to human-built infrastructure and live in flat, loose-substrate habitat. I tested for differences in morphology, behavior, and performance. Lizards from built sites were larger and had significantly (and relatively longer forelimbs and hindlimbs. The differences in hindlimb morphology were especially pronounced for distal components—the foot and longest toe. These morphologies facilitated a significant behavioral shift in jumping propensity across a rocky experimental substrate. I found no difference in maximum velocity between these populations; however, females originating from wall sites potentially accelerated faster over the rocky experimental substrate. The variation between these closely neighboring populations suggests that the lizards inhabiting walls have experienced a suite of trait changes enabling them to take advantage of the novel habitat structure created by humans.

64 x 64 thresholding photodetector array for optical pattern recognition

Science.gov (United States)

Langenbacher, Harry; Chao, Tien-Hsin; Shaw, Timothy; Yu, Jeffrey W.

1993-10-01

A high performance 32 X 32 peak detector array is introduced. This detector consists of a 32 X 32 array of thresholding photo-transistor cells, manufactured with a standard MOSIS digital 2-micron CMOS process. A built-in thresholding function that is able to perform 1024 thresholding operations in parallel strongly distinguishes this chip from available CCD detectors. This high speed detector offers responses from one to 10 milliseconds that is much higher than the commercially available CCD detectors operating at a TV frame rate. The parallel multiple peaks thresholding detection capability makes it particularly suitable for optical correlator and optoelectronically implemented neural networks. The principle of operation, circuit design and the performance characteristics are described. Experimental demonstration of correlation peak detection is also provided. Recently, we have also designed and built an advanced version of a 64 X 64 thresholding photodetector array chip. Experimental investigation of using this chip for pattern recognition is ongoing.

Development of a Plasma Streaming System for the Mirror Fusion Test Facility

International Nuclear Information System (INIS)

Holdsworth, T.; Clark, R.N.; McCotter, R.E.; Rossow, T.L.; Cruz, G.E.

1979-01-01

The Plasma Streaming System (PSS) is an essential portion of the Mirror Fusion Test Facility (MFTF), scheduled for completion in October 1981. The PSS will develop a plasma density of at least 2 x 10 12 particles/cm 3 at the MFTF magnet centerline by injecting particles along the field lines. The plasma will have a midplane plasma radius as large as 40 cm with variable plasma particle energy and beam geometry. Minimum amounts of impurities will be injected, with emphasis on minimizing high Z materials. Each of the 60 PSS units will consist of a gun magnet assembly (GMA) and a power supply. Each GMA consists of a plasma streaming gun, a pulse magnet that provides variable beam shaping, and a fast reaction pulse gas valve

National Conference on Sustainable Built Environment 2015

CERN Document Server

Biswas, Arindam; Khare, Ajay; Sen, Joy

2017-01-01

This book is a comprehensive document visualizing the future of built environment from a multidisciplinary dimension, with special emphasis on the Indian scenario. The multidisciplinary focus would be helpful for the readers to cross-refer and understand others' perspectives. The text also includes case studies substantiating theoretical research. This method of composition helps the book to maintain rational balance among theory, research and its contextual application. The book comprises selected papers from the National Conference on Sustainable Built Environment. The chapters provide varied viewpoints on the core issues of urbanization and planning, especially in the economically diverse Indian market. This compilation would be of interest to students, researchers, professionals and policy makers.

Hydrostatic pressure cells development for X-ray and neutron experiments

International Nuclear Information System (INIS)

Passamai Junior, Jose Luis

2010-01-01

It was developed and built two pressure cell original models in order to be applied in X-ray elastic scattering (X-ray diffraction), X-ray absorption and neutron scattering experiments (neutron diffraction) under hydrostatic pressure. For the first two experimental cases, where X-ray beam is used, the pressure cell built with two B 4 C anvil mounted in a CuBe body. The B 4 C anvil was prepared at CTA research center in order to present an enhanced X-ray transparence and hardness. The special detail and advantage of the CuBe cell with B 4 C anvil is that this cell can be also used to measure de AC magnetic susceptibility in situ. This special characteristic is highlight as new concept of labeled here as multipurpose pressure cell. A second type of cell pressure was developed in order to be used in neutron elastic scattering experiments, specific in neutron diffraction experiments. The neutron cell pressure was developed using carbon fibers composite to improve the mechanical resistance a cylindrical geometry. The B 4 C pressure cells were available to researches in LNLS. The neutron pressure cell was given to research staff of IPEN Nuclear Reactor. This work show details and draws of these two types of hydrostatic pressure cells. (author)

Interactions of psychosocial factors with built environments in explaining adolescents' active transportation.

Science.gov (United States)

Wang, Xiaobo; Conway, Terry L; Cain, Kelli L; Frank, Lawrence D; Saelens, Brian E; Geremia, Carrie; Kerr, Jacqueline; Glanz, Karen; Carlson, Jordan A; Sallis, James F

2017-07-01

The present study examined independent and interacting associations of psychosocial and neighborhood built environment variables with adolescents' reported active transportation. Moderating effects of adolescent sex were explored. Mixed-effects regression models were conducted on data from the Teen Environment and Neighborhood observational study (N=928) in the Seattle, WA and Baltimore regions 2009-2011. Frequency index of active transportation to neighborhood destinations (dependent variable) and 7 psychosocial measures were reported by adolescents. Built environment measures included home walkability and count of nearby parks and recreation facilities using GIS procedures and streetscape quality from environmental audits. Results indicated all 3 environmental variables and 3 psychosocial variables (self-efficacy, social support from peers, and enjoyment of physical activity) had significant positive main effects with active transportation (Pstransportation (Pstransportation was found among adolescents with the combination of activity-supportive built environment and positive psychosocial characteristics. Three-way interactions with sex indicated similar associations for girls and boys, with one exception. Results provided modest support for the ecological model principle of interactions across levels, highlight the importance of both built environment and psychosocial factors in shaping adolescents' active transportation, demonstrated the possibility of sex-specific findings, and suggested strategies for improving adolescents' active transportation may be most effective when targeting multiple levels of influence. Copyright © 2017 Elsevier Inc. All rights reserved.

Generation of n x m-scroll attractors in a two-port RCL network with hysteresis circuits

International Nuclear Information System (INIS)

Yu Simin; Tang, Wallace K.S.

2009-01-01

In this paper, the generation of n x m-scroll attractors based on a two-port network is presented. The two-port network is built according to the RCL circuit suggested in the conventional Chua's circuit. By appending hysteresis voltage controlled devices on this two-port network, n-scroll and n x m-scroll attractors can be duly obtained both in simulations and experiments.

Analysis on X-band structure breakdown at GLCTA

International Nuclear Information System (INIS)

Suehara, T.; Sanuki, T.; Komamiya, S.; Higo, T.; Hayano, H.; Terunuma, N.; Saeki, T.; Watanabe, K.; Hayakawa, A.; Tsukada, Y.

2004-01-01

We have built a new monitoring system for accelerator structure breakdown in the X-band high-gradient test facility at KEK (GLCTA: Global Linear Collider Test Accelerator). An X-band test structure KX01 (made by KEK) has been processed at GLCTA and we have been collecting data for about 3 months using this breakdown monitoring system. We describe overview of the monitoring system and preliminary result of breakdown analysis of the structure. (author)

Low-noise analog readout channel for SDD in X-ray spectrometry

Science.gov (United States)

Atkin, E.; Gusev, A.; Krivchenko, A.; Levin, V.; Malankin, E.; Normanov, D.; Rotin, A.; Sagdiev, I.; Samsonov, V.

2016-01-01

A low-noise analog readout channel optimized for operation with the Silicon Drift Detectors (SDDs) with built-in JFET is presented. The Charge Sensitive Amplifier (CSA) operates in a pulse reset mode using the reset diode built-in the SDD detector. The shaper is a 6th order semi-Gaussian filter with switchable discrete shaping times. The readout channel provides the Equivalent Noise Charge (ENC) of 12e- (simulation) and input dynamic range of 30 keV . The measured energy resolution at the 5,89 keV line of a 55Fe X-ray source is 336 eV (FWHM). The channel was prototyped via Europractice in the AMS 350 nm process as miniASIC. The simulation and first measurement results are presented in the paper.

Schooling Built on the Multiple Intelligences

Science.gov (United States)

Kunkel, Christine D.

2009-01-01

This article features a school built on multiple intelligences. As the first multiple intelligences school in the world, the Key Learning Community shapes its students' days to include significant time in the musical, spatial and bodily-kinesthetic intelligences, as well as the more traditional areas of logical-mathematical and linguistics. In…

Research of Jiles-Atherton Dynamic Model in Giant Magnetostrictive Actuator

Directory of Open Access Journals (Sweden)

Yongguang Liu

2016-01-01

Full Text Available Due to the existence of multicoupled nonlinear factors in the giant magnetostrictive actuator (GMA, building precise mathematical model is highly important to study GMA’s characteristics and control strategies. Minor hysteresis loops near the bias magnetic field would be often applied because of its relatively good linearity. Load, friction, and disc spring stiffness seriously affect the output characteristics of the GMA in high frequency. Therefore, the current-displacement dynamic minor loops mathematical model coupling of electric-magnetic-machine is established according to Jiles-Atherton (J-A dynamic model of hysteresis material, GMA structural dynamic equation, Ampere loop circuit law, and nonlinear piezomagnetic equation and demonstrates its correctness and effectiveness in the experiments. Finally, some laws are achieved between key structural parameters and output characteristics of GMA, which provides important theoretical foundation for structural design.

Built Environment Analysis Tool: April 2013

Energy Technology Data Exchange (ETDEWEB)

Porter, C.

2013-05-01

This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

The advantages of soft X-rays and cryogenic spectrometers for measuring chemical speciation by X-ray spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Drury, Owen B. [Lawrence Livermore National Laboratory, Advanced Detector Group, 7000 East Ave., L-270, Livermore, CA 94550 (United States); UC Davis, Biophysics Graduate Group, 1 Shields Ave, CA 95616 (United States); LBNL, Advanced Biological and Environmental X-ray Facility, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 92720 (United States); Friedrich, Stephan [Lawrence Livermore National Laboratory, Advanced Detector Group, 7000 East Ave., L-270, Livermore, CA 94550 (United States) and LBNL, Advanced Biological and Environmental X-ray Facility, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 92720 (United States)]. E-mail: friedrich1@llnl.gov; George, Simon J. [LBNL, Advanced Biological and Environmental X-ray Facility, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 92720 (United States); Cramer, Stephen P. [UC Davis, Biophysics Graduate Group, 1 Shields Ave, CA 95616 (United States); LBNL, Advanced Biological and Environmental X-ray Facility, 1 Cyclotron Road, MS 6-2100, Berkeley, CA 92720 (United States)

2006-04-15

We have built a 36-pixel high-resolution superconducting tunnel junction (STJ) soft X-ray spectrometer for chemical analysis of dilute metals by fluorescence-detected X-ray absorption spectroscopy (XAS) at the Advanced Light Source synchrotron. Soft X-ray absorption edges are preferred over traditional hard X-ray spectroscopy at the K-edges, since they have narrower natural linewidths and exhibit stronger chemical shifts. STJ detectors are preferred in the soft X-ray band over traditional Ge or grating spectrometers, since they have sufficient energy resolution to resolve transition metal L and M lines from light element K emission, and sufficient detection efficiency to measure the weak lines of dilute specimens within an acceptable time. We demonstrate the capabilities of our STJ spectrometer for chemical analysis with soft XAS measurements of molybdenum speciation on the Mo M{sub 4,5}-edges.

As-Built Verification Plan Spent Nuclear Fuel Canister Storage Building MCO Handling Machine

International Nuclear Information System (INIS)

SWENSON, C.E.

2000-01-01

This as-built verification plan outlines the methodology and responsibilities that will be implemented during the as-built field verification activity for the Canister Storage Building (CSB) MCO HANDLING MACHINE (MHM). This as-built verification plan covers THE ELECTRICAL PORTION of the CONSTRUCTION PERFORMED BY POWER CITY UNDER CONTRACT TO MOWAT. The as-built verifications will be performed in accordance Administrative Procedure AP 6-012-00, Spent Nuclear Fuel Project As-Built Verification Plan Development Process, revision I. The results of the verification walkdown will be documented in a verification walkdown completion package, approved by the Design Authority (DA), and maintained in the CSB project files

Measurement of core plasma temperature and rotation on W7-X made available by the x-ray imaging crystal spectrometer (XICS)

Energy Technology Data Exchange (ETDEWEB)

Pablant, N A; Bitter, M; Burhenn, R; Delgado-Aparicio, L; Ellis, R; Gates, D; Goto, M; Hill, K W; Langenberg, A; Lazerson, S; Mardenfeld, M; Morita, S; Neilson, G H; Oishi, T; Pedersen, T S

2014-07-01

A new x-ray imaging crystal spectrometer diagnostic (XICS) is currently being built for installation on W7-X. This diagnostic will contribute to the study of ion and electron thermal transport and the evolution of the radial electric field by providing high resolution temperature and rotation measurements under many plasma conditions, including ECH heated plasmas. Installation is expected before the first experimental campaign (OP1.1), making an important set of measurements available for the first W7-X plasmas. This diagnostic will also work in concert with the HR-XCS diagnostic to provide an excellent diagnostic set for core impurity transport on W7-X.

EDITORIAL: BUILT ENVIRONMENT PERSPECTIVES ON POST-DISASTER RECONSTRUCTION

Directory of Open Access Journals (Sweden)

Jason von Meding

2013-11-01

It is with great pleasure that we would like to introduce this special issue of IJAR, a compilation of cutting-edge research that covers many of the key themes relevant to built environment researchers in disaster-related areas. This knowledge area is by its very nature absolutely multidisciplinary and for this reason it is difficult to quantify built environment impacts, drivers and outcomes in isolation and disaggregate them from non-built environment factors. However, regardless of certain limitations to research carried out from a built environment perspective, as would be the case from any specific disciplinary perspective, a significant body of work has emerged and is constantly growing and evolving in parallel with the research agenda. Built environment researchers around the globe are now, more than ever, exploring various problems that threaten humanity in the way of dire vulnerability and more frequent and powerful hazards. This collection of papers will look specifically at one area of disaster management, postdisaster reconstruction. Reconstruction projects primarily occur during the recovery phase of the disaster cycle, playing a key role in bringing vulnerable communities back to normalcy, integrating disaster risk reduction and preparedness measures to increase resilience to future hazard events. The special issue is broken into four thematic areas; Context and Culture, Theory, Resilience and Risk Reduction and Design. The three papers in Section 1- Context and Culture deal with the impacts of disasters on places and the people that inhabit them, investigating the extent to which reconstruction projects can address social and cultural problems. Meanwhile, the two papers in Section 2- Theory put forward new theoretical perspectives with regards to stakeholder engagement and management, representing the growth of alternative points of departure in this area. The three papers in Section 3- Resilience and Risk Reduction explore various approaches to

Toughening modification of poly(butylene terephthalate)/poly(ethylene terephthalate) blends by an epoxy-functionalized elastomer

Science.gov (United States)

Zhang, Weizhou; Wang, Kai; Yan, Wei; Guo, Weihong

2017-10-01

New toughened poly(butylene terephthalate) (PBT)/poly(ethylene terephthalate) (PET) (40/60 wt%) blends were obtained by melting with Glycidyl methacrylate grafted poly(ethylene octane) copolymer (POE-g-GMA), varying the POE-g-GMA content up to 20 wt%, in a twin-screw extruder, followed by injection molding. The influence of POE-g-GMA on the properties of the PBT/PET blends was investigated by mechanical testing, Fourier transform infrared (FT-IR) analysis, gel fractions analysis, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC) and scanning electronic microscopy (SEM). The mechanical testing results indicated that the incorporation of POE-g-GMA led to increases in the notched impact strength and decreases in the tensile strength, flexural strength, and flexural modulus. When POE-g-GMA content reached 20 wt%, the notched impact strength (8.0 kJ m-2) was achieved for the PBT/PET/POE-g-GMA blends. FT-IR results proved that some PBT/PET/POE-g-GMA copolymers were produced, which improved the compatibility between POE-g-GMA and the PBT/PET matrix. The extent of crosslinking was observed by gel fraction measurements. DMA results further testified chain-extending and micro-crosslink reactions occurred between POE-g-GMA and PBT/PET blends. In addition, the reactions induced by POE-g-GMA affected the crystallization behavior of PBT/PET blends obviously, as observed from DSC results. By means of SEM observation of the impact fracture surface morphology, and the discussion of the micro-crosslink reaction process between the epoxide-containing elastomers and PBT/PET matrix, the toughening mechanism was proposed to be taken into account the shear yielding of PBT/PET matrix and cavitation of elastomer particles.

DOCUMENTATION AND MONITORING OF BUILT HERITAGE IN ABU DHABI, UAE

Directory of Open Access Journals (Sweden)

S. Muhammad

2013-07-01

Full Text Available The ancient oasis-city of Al Ain in Abu Dhabi Emirate still retains the most important and outstanding cultural heritage of United Arab Emirates (UAE. The larger area of Abu Dhabi Emirate comprised of archaeological sites, cultural landscapes and historic buildings dating back to 3rd millennium to the recent pre-oil era. Traditional materials like stone, earth and palm wood were used in combination with local construction methods. For the last seven years the newly formed Abu Dhabi Tourism & Culture Authority (TCA Abu Dhabi1 has been actively involved in conservation of built heritage in Abu Dhabi Emirate with the help of its Conservation Section. Documentation prior to any conservation and restoration works is considered as a basic pre-requisite for understanding an historic building or site. It is a process which continues during the conservation of any monument and is the only accurate tool for recording information in order to understand the structure, ultimately leading to the management of cultural heritage. Application and use of tools, ranging from basic manual techniques to 3D laser scanning, based on the best practices and international guidelines the exercise will help in establishing a documentation lab with standard procedures, specifications and tools for the documentation and monitoring the built heritage of Abu Dhabi Emirate. This paper will discuss a range of case studies and will demonstrate how documentation and monitoring of the built heritage has augmented the various conservation initiatives on a variety of building types.

The changing patterns of cropland conversion to built-up land in China from 1987 to 2010

Science.gov (United States)

Ju, H.; Zhang, Z.; Zhao, X.; Wu, W.; Wang, X.; Zuo, L.

2017-12-01

With the rapid urbanization, industrialization and rural area construction in China, the expansions of built-up land encroached upon a large amount of cropland, and thus placed great challenges on national food security. Previous studies have primarily been focused on the whole effects of built-up land expansion, however, the individual effect of different types of built-up land (urban areas, rural settlements and industrial/transportation land) on cropland loss remains unclear. Based on land use maps interpreted from remote sensing imagery in 1987-2010, we illustrated the spatio-temporal patterns of the speed and the structure of cropland conversion to built-up land. Then, we quantitatively measured the influence of different built-up land on cropland loss from three aspects: the contribution of built-up land expansion to cropland loss, the dependence of built-up land expansion on cropland loss and the conversion's impacts on cropland quality. It was found 42,822 km2 of cropland were converted into built-up land in China, accounting for 43.8% of total cropland loss during 1987-2010. Before 2000, the expansion of rural settlements had the largest influence on cropland loss, however, urban growth showed a greater impact on cropland loss after 2000. Although the effects of rural settlements expansion decreased, rural settlements still saw the highest percentage of the loss of traditional cropland which is generally in high quality. In addition, the impacts of industrial/transportation land expansion increased dramatically and was mainly distributed in major food production regions. These changes were closely related to the economic restructuring, urban-rural transformation and government policies in China. These findings demonstrate that Chinese cropland conservation in both amount and quality should focus not only on finding a reasonable urbanization mode, but also solving the "hollowing village" problem and balancing the industrial transformations in the future.

Growth of MCF-7 breast cancer cells and efficacy of anti-angiogenic agents in a hydroxyethyl chitosan/glycidyl methacrylate hydrogel.

Science.gov (United States)

Wang, Hejing; Qian, Junmin; Zhang, Yaping; Xu, Weijun; Xiao, Juxiang; Suo, Aili

2017-01-01

Breast cancer negatively affects women's health worldwide. The tumour microenvironment plays a critical role in tumour initiation, proliferation, and metastasis. Cancer cells are traditionally grown in two-dimensional (2D) cultures as monolayers on a flat solid surface lacking cell-cell and cell-matrix interactions. These experimental conditions deviate from the clinical situation. Improved experimental systems that can mimic the in vivo situation are required to discover new therapies, particularly for anti-angiogenic agents that mainly target intercellular factors and play an essential role in treating some cancers. Chitosan can be modified to construct three-dimensional (3D) tumour models. Here, we report an in vitro 3D tumour model using a hydroxyethyl chitosan/glycidyl methacrylate (HECS-GMA) hydrogel produced by a series of chitosan modifications. Parameters relating to cell morphology, viability, proliferation, and migration were analysed using breast cancer MCF-7 cells. In a xenograft model, secretion of angiogenesis-related growth factors and the anti-angiogenic efficacy of Endostar and Bevacizumab in cells grown in HECS-GMA hydrogels were assessed by immunohistochemistry. Hydroxyethyl chitosan/glycidyl methacrylate hydrogels had a highly porous microstructure, mechanical properties, swelling ratio, and morphology consistent with a 3D tumour model. Compared with a 2D monolayer culture, breast cancer MCF-7 cells residing in the HECS-GMA hydrogels grew as tumour-like clusters in a 3D formation. In a xenograft model, MCF-7 cells cultured in the HECS-GMA hydrogels had increased secretion of angiogenesis-related growth factors. Recombinant human endostatin (Endostar), but not Bevacizumab (Avastin), was an effective anti-angiogenic agent in HECS-GMA hydrogels. The HECS-GMA hydrogel provided a 3D tumour model that mimicked the in vivo cancer microenvironment and supported the growth of MCF7 cells better than traditional tissue culture plates. The HECS-GMA

Differential Deposition for Surface Figure Corrections in Grazing Incidence X-Ray Optics

Science.gov (United States)

Ramsey, Brian D.; Kilaru, Kiranmayee; Atkins, Carolyn; Gubarev, Mikhail V.; Broadway, David M.

2015-01-01

Differential deposition corrects the low- and mid- spatial-frequency deviations in the axial figure of Wolter-type grazing incidence X-ray optics. Figure deviations is one of the major contributors to the achievable angular resolution. Minimizing figure errors can significantly improve the imaging quality of X-ray optics. Material of varying thickness is selectively deposited, using DC magnetron sputtering, along the length of optic to minimize figure deviations. Custom vacuum chambers are built that can incorporate full-shell and segmented Xray optics. Metrology data of preliminary corrections on a single meridian of full-shell x-ray optics show an improvement of mid-spatial frequencies from 6.7 to 1.8 arc secs HPD. Efforts are in progress to correct a full-shell and segmented optics and to verify angular-resolution improvement with X-ray testing.

Footprints of air pollution and changing environment on the sustainability of built infrastructure.

Science.gov (United States)

Kumar, Prashant; Imam, Boulent

2013-02-01

Over 150 research articles relating three multi-disciplinary topics (air pollution, climate change and civil engineering structures) are reviewed to examine the footprints of air pollution and changing environment on the sustainability of building and transport structures (referred as built infrastructure). The aim of this review is to synthesize the existing knowledge on this topic, highlight recent advances in our understanding and discuss research priorities. The article begins with the background information on sources and emission trends of global warming (CO(2), CH(4), N(2)O, CFCs, SF(6)) and corrosive (SO(2), O(3), NO(X)) gases and their role in deterioration of building materials (e.g. steel, stone, concrete, brick and wood) exposed in outdoor environments. Further section covers the impacts of climate- and pollution-derived chemical pathways, generally represented by dose-response functions (DRFs), and changing environmental conditions on built infrastructure. The article concludes with the discussions on the topic areas covered and research challenges. A comprehensive inventory of DRFs is compiled. The case study carried out for analysing the inter-comparability of various DRFs on four different materials (carbon steel, limestone, zinc and copper) produced comparable results. Results of another case study revealed that future projected changes in temperature and/or relatively humidity are expected to have a modest effect on the material deterioration rate whereas changes in precipitation were found to show a more dominant impact. Evidences suggest that both changing and extreme environmental conditions are expected to affect the integrity of built infrastructure both in terms of direct structural damage and indirect losses of transport network functionality. Unlike stone and metals, substantially limited information is available on the deterioration of brick, concrete and wooden structures. Further research is warranted to develop more robust and

Photocatalytic oxide films in the built environment

Science.gov (United States)

Österlund, Lars; Topalian, Zareh

2014-11-01

The possibility to increase human comfort in buildings is a powerful driving force for the introduction of new technology. Among other things our sense of comfort depends on air quality, temperature, lighting level, and the possibility of having visual contact between indoors and outdoors. Indeed there is an intimate connection between energy, comfort, and health issues in the built environment, leading to a need for intelligent building materials and green architecture. Photocatalytic materials can be applied as coatings, filters, and be embedded in building materials to provide self-cleaning, antibacterial, air cleaning, deodorizing, and water cleaning functions utilizing either solar light or artificial illumination sources - either already present in buildings, or by purposefully designed luminaries. Huge improvements in indoor comfort can thus be made, and also alleviate negative health effects associated with buildings, such as the sick-house syndrome. At the same time huge cost savings can be made by reducing maintenance costs. Photocatalytic oxides can be chemically modified by changing their acid-base surface properties, which can be used to overcome deactivation problems commonly encountered for TiO2 in air cleaning applications. In addition, the wetting properties of oxides can be tailored by surface chemical modifications and thus be made e.g. oleophobic and water repellent. Here we show results of surface acid modified TiO2 coatings on various substrates by means of photo-fixation of surface sulfate species by a method invented in our group. In particular, we show that such surface treatments of photocatalytic concrete made by mixing TiO2 nanoparticles in reactive concrete powders result in concrete surfaces with beneficial self-cleaning properties. We propose that such approaches are feasible for a number of applications in the built environment, including glass, tiles, sheet metals, plastics, etc.

Photocatalytic oxide films in the built environment

International Nuclear Information System (INIS)

Österlund, Lars; Topalian, Zareh

2014-01-01

The possibility to increase human comfort in buildings is a powerful driving force for the introduction of new technology. Among other things our sense of comfort depends on air quality, temperature, lighting level, and the possibility of having visual contact between indoors and outdoors. Indeed there is an intimate connection between energy, comfort, and health issues in the built environment, leading to a need for intelligent building materials and green architecture. Photocatalytic materials can be applied as coatings, filters, and be embedded in building materials to provide self-cleaning, antibacterial, air cleaning, deodorizing, and water cleaning functions utilizing either solar light or artificial illumination sources – either already present in buildings, or by purposefully designed luminaries. Huge improvements in indoor comfort can thus be made, and also alleviate negative health effects associated with buildings, such as the sick-house syndrome. At the same time huge cost savings can be made by reducing maintenance costs. Photocatalytic oxides can be chemically modified by changing their acid-base surface properties, which can be used to overcome deactivation problems commonly encountered for TiO 2 in air cleaning applications. In addition, the wetting properties of oxides can be tailored by surface chemical modifications and thus be made e.g. oleophobic and water repellent. Here we show results of surface acid modified TiO 2 coatings on various substrates by means of photo-fixation of surface sulfate species by a method invented in our group. In particular, we show that such surface treatments of photocatalytic concrete made by mixing TiO 2 nanoparticles in reactive concrete powders result in concrete surfaces with beneficial self-cleaning properties. We propose that such approaches are feasible for a number of applications in the built environment, including glass, tiles, sheet metals, plastics, etc

Giant dipole resonances built on excited states

International Nuclear Information System (INIS)

Snover, K.A.

1983-01-01

The properties of giant dipole resonances built on excited nuclear states are reviewed, with emphasis on recent results. Nonstatistical (p,γ) reactions in light nuclei, and statistical complex-particle reactions in light and heavy nuclei are discussed. 27 references

Serum galactomannan screening for diagnosis of invasive pulmonary aspergillosis in children after stem cell transplantation or with high-risk leukemia.

Science.gov (United States)

Gefen, Aharon; Zaidman, Irina; Shachor-Meyouhas, Yael; Avidor, Israela; Hakim, Fahed; Weyl Ben-Arush, Myriam; Kassis, Imad

2015-03-01

Both transplanted and leukemia patients are at high risk (HR) for invasive pulmonary aspergillosis (IPA). Methods for rapid diagnosis are crucial. Our objective was to investigate the impact of serial serum galactomannan assay (GMA) screening on IPA diagnosis in children. Between January 2010 and December 2011, all children following stem cell transplantation (SCT) or with HR leukemia were prospectively included. Serum samples for GMA were taken once-twice weekly. Results >.5 were considered positive. Patients suspected of having IPA were stratified as possible, probable, and definite. Forty-six children (median age, 8 years) were included, 38 after SCT (32 allogeneic), 8 with HR leukemia. A total of 510 samples were taken; screening period was 1-6 months for 34 patients. GMA was negative in 28 patients, all but one without suspicion of IPA. Eighteen patients had positive GMA: while four (22%) were upgraded to probable IPA, fourteen (78%) were considered as false positives (FP), some associated with piperacillin-tazobactam treatment. GMA sensitivity and specificity were 0.8 and 0.66, respectively; positive- and negative-predictive values (PPV, NPV) were 0.22 and 0.96, respectively. GMA may have a role in evaluating HR children for IPA. Both NPV and FP rates are high. The cost benefit of early detection versus over-diagnosis should be further studied.

Barriers to optimizing investments in the built environment to reduce youth obesity: policy-maker perspectives.

Science.gov (United States)

Grant, Jill L; MacKay, Kathryn C; Manuel, Patricia M; McHugh, Tara-Leigh F

2010-01-01

To identify factors which limit the ability of local governments to make appropriate investments in the built environment to promote youth health and reduce obesity outcomes in Atlantic Canada. Policy-makers and professionals participated in focus groups to discuss the receptiveness of local governments to introducing health considerations into decision-making. Seven facilitated focus groups involved 44 participants from Atlantic Canada. Thematic discourse analysis of the meeting transcripts identified systemic barriers to creating a built environment that fosters health for youth aged 12-15 years. Participants consistently identified four categories of barriers. Financial barriers limit the capacities of local government to build, maintain and operate appropriate facilities. Legacy issues mean that communities inherit a built environment designed to facilitate car use, with inadequate zoning authority to control fast food outlets, and without the means to determine where schools are built or how they are used. Governance barriers derive from government departments with distinct and competing mandates, with a professional structure that privileges engineering, and with funding programs that encourage competition between municipalities. Cultural factors and values affect outcomes: people have adapted to car-oriented living; poverty reduces options for many families; parental fears limit children's mobility; youth receive limited priority in built environment investments. Participants indicated that health issues have increasing profile within local government, making this an opportune time to discuss strategies for optimizing investments in the built environment. The focus group method can foster mutual learning among professionals within government in ways that could advance health promotion.

Climate Change Impacts on the Built Environment in Nigeria ...

African Journals Online (AJOL)

The populations, infrastructure and ecology of cities are at risk from the impacts of climate change which affect urban ventilation and cooling, urban drainage and flood risk and water resources. Built areas exert considerable influence over their local climate and environment, and urban populations are already facing a ...

The influence of individual and team cognitive ability on operators' task and safety performance: a multilevel field study in nuclear power plants.

Directory of Open Access Journals (Sweden)

Jingyu Zhang

Full Text Available While much research has investigated the predictors of operators' performance such as personality, attitudes and motivation in high-risk industries, its cognitive antecedents and boundary conditions have not been fully investigated. Based on a multilevel investigation of 312 nuclear power plant main control room operators from 50 shift teams, the present study investigated how general mental ability (GMA at both individual and team level can influence task and safety performance. At the individual level, operators' GMA was predictive of their task and safety performance and this trend became more significant as they accumulated more experience. At the team level, we found team GMA had positive influences on all three performance criteria. However, we also found a "big-fish-little-pond" effect insofar as team GMA had a relatively smaller effect and inhibited the contribution of individual GMA to workers' extra-role behaviors (safety participation compared to its clear beneficial influence on in-role behaviors (task performance and safety compliance. The possible mechanisms related to learning and social comparison processes are discussed.

The influence of individual and team cognitive ability on operators' task and safety performance: a multilevel field study in nuclear power plants.

Science.gov (United States)

Zhang, Jingyu; Li, Yongjuan; Wu, Changxu

2013-01-01

While much research has investigated the predictors of operators' performance such as personality, attitudes and motivation in high-risk industries, its cognitive antecedents and boundary conditions have not been fully investigated. Based on a multilevel investigation of 312 nuclear power plant main control room operators from 50 shift teams, the present study investigated how general mental ability (GMA) at both individual and team level can influence task and safety performance. At the individual level, operators' GMA was predictive of their task and safety performance and this trend became more significant as they accumulated more experience. At the team level, we found team GMA had positive influences on all three performance criteria. However, we also found a "big-fish-little-pond" effect insofar as team GMA had a relatively smaller effect and inhibited the contribution of individual GMA to workers' extra-role behaviors (safety participation) compared to its clear beneficial influence on in-role behaviors (task performance and safety compliance). The possible mechanisms related to learning and social comparison processes are discussed.

RF phase focusing in portable x-band, linear accelerators

International Nuclear Information System (INIS)

Miller, R.H.; Deruyter, H.; Fowkes, W.R.; Potter, J.M.; Schonberg, R.G.; Weaver, J.N.

1985-01-01

In order to minimize the size and weight of the x-ray or neutron source for a series of portable radiographic linear accelerators, the x-ray head was packaged separately from the rest of the system and consists of only the linac accelerating structure, electron gun, built-in target, collimator, ion pump and an RF window. All the driving electronics and cooling are connected to the x-ray head through flexible waveguide, cables, and waterlines. The x-ray head has been kept small and light weight by using the RF fields for radial focusing, as well as for longitudinal bunching and accelerating the beam. Thus, no external, bulky magnetic focusing devices are required. The RF focusing is accomplished by alternating the sign of the phase difference between the RF and the beam and by tapering from cavity to cavity the magnitude of the buncher field levels. The former requires choosing the right phase velocity taper (mix of less than vp = c cavities) and the latter requires the right sizing of the cavity to cavity coupling smiles (irises)

RF phase focusing in portable X-band, linear accelerators

International Nuclear Information System (INIS)

Miller, R.H.; Deruyter, H.; Fowkes, W.R.; Potter, J.W.; Schonberg, R.G.; Weaver, J.W.

1985-01-01

In order to minimize the size and weight of the x-ray or neutron source for a series of portable radiographic linear accelerators, the x-ray head was packaged separately from the rest of the system and consists of only the linac accelerating structure, electron gun, built-in target, collimator, ion pump and an RF window. All the driving electronics and cooling are connected to the x-ray head through flexible waveguide, cables, and waterlines. The x-ray head has been kept small and light weight by using the RF fields for radial focusing, as well as for longitudinal bunching and accelerating the beam. Thus, no external, bulky magnetic focusing devices are required. The RF focusing is accomplished by alternating the sign of the phase difference between the RF and the beam and by tapering from cavity to cavity the magnitude of the buncher field levels. The former requires choosing the right phase velocity taper (mix of less than vp=c cavities) and the latter requires the right sizing of the cavity to cavity coupling smiles (irises)

Reliability of Dubbed Technical Systems with Built-In Control Device

Directory of Open Access Journals (Sweden)

V. A. Аnischenko

2013-01-01

Full Text Available The paper substantiates a selection of passive or active system for dubbing technical systems in accordance with characteristics pertaining to probability of no-failure operation and mean–time-between failures with due account of non-reliability of a built-in control device and systems complexity. 

Built-in and Induced Polarization Across LaAlO3/SrTiO3 Heterojunctions

Energy Technology Data Exchange (ETDEWEB)

Guneeta, Singh-Bhalla

2011-08-15

Ionic crystals terminated at oppositely charged polar surfaces are inherently unstable and expected to undergo surface reconstructions to maintain electrostatic stability. Essentially, an electric field that arises between oppositely charged atomic planes gives rise to a built-in potential that diverges with thickness. Here we present evidence of such a built-in potential across polar LaAlO{sub 3} thin films grown on SrTiO{sub 3} substrates, a system well known for the electron gas that forms at the interface. By performing tunneling measurements between the electron gas and metallic electrodes on LaAlO{sub 3} we measure a built-in electric field across LaAlO{sub 3} of 80.1 meV/{angstrom}. Additionally, capacitance measurements reveal the presence of an induced dipole moment across the heterostructure. We forsee use of the ionic built-in potential as an additional tuning parameter in both existing and novel device architectures, especially as atomic control of oxide interfaces gains widespread momentum.

Composition dependences of crystal structure and electrical properties of epitaxial Pb(Zr,Ti)O3 films grown on Si and SrTiO3 substrates

Science.gov (United States)

Okamoto, Shoji; Okamoto, Satoshi; Yokoyama, Shintaro; Akiyama, Kensuke; Funakubo, Hiroshi

2016-10-01

{100}-oriented Pb(Zr x ,Ti1- x )O3 (PZT) thin films of approximately 2 µm thickness and Zr/(Zr + Ti) ratios of 0.39-0.65 were epitaxially grown on (100)cSrRuO3//(100)SrTiO3 (STO) and (100)cSrRuO3//(100)cLaNiO3//(100)CeO2//(100)YSZ//(100)Si (Si) substrates having different thermal expansion coefficients by pulsed metal-organic chemical vapor deposition (MOCVD). The effects of Zr/(Zr + Ti) ratio and type of substrate on the crystal structure and dielectric, ferroelectric and piezoelectric properties of the films were systematically investigated. The X-ray diffraction measurement showed that both films changed from having a tetragonal symmetry to rhombohedral symmetry through the coexisting region with increasing Zr/(Zr + Ti) ratio. This region showed the Zr/(Zr + Ti) ratios of 0.45-0.59 for the films on the STO substrates that were wider than the films on the Si substrates. Saturation polarization values were minimum at approximately Zr/(Zr + Ti) = 0.50 for the films on the STO substrates, and no obvious Zr/(Zr + Ti) ratio dependence was detected in the films on the Si substrates. On the other hand, the maximum field-induced strain values measured by scanning force microscopy at approximately Zr/(Zr + Ti) = 0.50 at 100 kV/cm were about 0.5 and 0.1% in the films on the Si and STO, respectively.

Considering built environment and spatial correlation in modelling pedestrian injury severity

DEFF Research Database (Denmark)

Prato, Carlo G.; Kaplan, Sigal; Patrier, Alexandre

traffic calming measures, illumination solutions, road maintenance programs and speed limit reductions. Moreover, this study emphasises the role of the built environment, as shopping areas, residential areas, and walking traffic density are positively related to a reduction in pedestrian injury severity......This study looks at mitigating and aggravating factors that are associated with the injury severity of pedestrians when they have crashes with another road user and overcomes existing limitations in the literature by posing attention on the built environment and considering spatial correlation...... of pedestrians to sustain a severe or fatal injury conditional on the occurrence of a crash with another road user. This study confirms previous findings about older pedestrians and intoxicated pedestrians being the most vulnerable road users, and crashes with heavy vehicles and in roads with higher speed limits...

Considering built environment and spatial correlation in modelling pedestrian injury severity

DEFF Research Database (Denmark)

Prato, Carlo G.; Kaplan, Sigal; Patrier, Alexandre

2018-01-01

traffic calming measures, illumination solutions, road maintenance programs and speed limit reductions. Moreover, this study emphasises the role of the built environment, as shopping areas, residential areas, and walking traffic density are positively related to a reduction in pedestrian injury severity......This study looks at mitigating and aggravating factors that are associated with the injury severity of pedestrians when they have crashes with another road user and overcomes existing limitations in the literature by posing attention on the built environment and considering spatial correlation...... of pedestrians to sustain a severe or fatal injury conditional on the occurrence of a crash with another road user. This study confirms previous findings about older pedestrians and intoxicated pedestrians being the most vulnerable road users, and crashes with heavy vehicles and in roads with higher speed limits...

Formal training in general movement assessment is required to effectively evaluate infants with perinatal asphyxia in outpatient settings

DEFF Research Database (Denmark)

Brown, Annemette K; Greisen, Gorm; Haugsted, Ulla

2016-01-01

recordings to assess GMA, in a busy Danish outpatient clinic. METHODS: The study comprised 30-term infants born with perinatal asphyxia, who were video recorded at three months. They were assessed by two certified GMA observers and re-assessed two weeks later. Interobserver and intra-observer agreements were...

Solution spectroelectrochemical cell for in situ X-ray absorption fine structure

International Nuclear Information System (INIS)

Antonio, M.R.; Soderholm, L.

1995-01-01

A purpose-built spectroelectrochemical cell for in situ fluorescence XAFS (X-ray Absorption Fine Structure) measurements of bulk solution species during constant-potential electrolysis is described. The cell performance was demonstrated by the collection of europium L 3 -edge XANES (X-ray Absorption Near Edge Structure) throughout the course of electrolysis of an aqueous solution of EuCl 3 ·6H 2 O in 1 M H 2 SO 4 . The europium L 3 -edge resonances reported here for the Eu III and Eu II ions demonstrate that their 2p 3/2 → 5d electronic transition probabilities are not the same

Modular Zero Energy. BrightBuilt Home

Energy Technology Data Exchange (ETDEWEB)

Aldrich, Robb [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States). Steven Winters Associates, Inc.; Butterfield, Karla [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States). Steven Winters Associates, Inc.

2016-03-01

Kaplan Thompson Architects (KTA) has specialized in sustainable, energy-efficient buildings, and they have designed several custom, zero-energy homes in New England. These zero-energy projects have generally been high-end, custom homes with budgets that could accommodate advanced energy systems. In an attempt to make zero energy homes more affordable and accessible to a larger demographic, KTA explored modular construction as way to provide high-quality homes at lower costs. In the mid-2013, KTA formalized this concept when they launched BrightBuilt Home (BBH). The BBH mission is to offer a line of architect-designed, high-performance homes that are priced to offer substantial savings off the lifetime cost of a typical home and can be delivered in less time. For the past two years, CARB has worked with BBH and Keiser Homes (the primary modular manufacturer for BBH) to discuss challenges related to wall systems, HVAC, and quality control. In Spring of 2014, CARB and BBH began looking in detail on a home to be built in Lincolnville, ME by Black Bros. Builders. This report details the solution package specified for this modular plan and the challenges that arose during the project.

Social, economic, and political processes that create built environment inequities: perspectives from urban African Americans in Atlanta.

Science.gov (United States)

Redwood, Yanique; Schulz, Amy J; Israel, Barbara A; Yoshihama, Mieko; Wang, Caroline C; Kreuter, Marshall

2010-01-01

Growing evidence suggests that the built environment features found in many high-poverty urban areas contribute to negative health outcomes. Both built environment hazards and negative health outcomes disproportionately affect poor people of color. We used community-based participatory research and Photovoice in inner-city Atlanta to elicit African Americans' perspectives on their health priorities. The built environment emerged as a critical factor, impacting physical and mental health outcomes. We offer a conceptual model, informed by residents' perspectives, linking social, economic, and political processes to built environment and health inequities. Research, practice, and policy implications are discussed within an environmental justice framework.

Smart built-in test for nuclear thermal propulsion

International Nuclear Information System (INIS)

Lombrozo, P.C.

1992-03-01

Smart built-in test (BIT) technologies are envisioned for nuclear thermal propulsion spacecraft components which undergo constant irradiation and are therefore unsafe for manual testing. Smart BIT systems of automated/remote type allow component and system tests to be conducted; failure detections are directly followed by reconfiguration of the components affected. The 'smartness' of the BIT system in question involves the reduction of sensor counts via the use of multifunction sensors, the use of components as integral sensors, and the use of system design techniques which allow the verification of system function beyond component connectivity

An association between geomagnetic activity and dream bizarreness.

Science.gov (United States)

Lipnicki, Darren M

2009-07-01

Daily disturbances of the earth's magnetic field produce variations in geomagnetic activity (GMA) that are reportedly associated with widespread effects on human health and behaviour. Some of these effects could be mediated by an established influence of GMA on the secretion of melatonin. There is evidence from unrelated research that melatonin influences dream bizarreness, and it is hypothesised here that there is an association between GMA and dream bizarreness. Also reported is a preliminary test of this hypothesis, a case study in which the dreams recorded over 6.5 years by a young adult male were analysed. Reports of dreams from the second of two consecutive days of either low or high GMA (K index sum or = 28) were self-rated for bizarreness on a 1-5 scale. Dreams from low GMA periods (n=69, median bizarreness=4) were found to be significantly more bizarre than dreams from high GMA periods (n=85, median bizarreness=3; p=0.006), supporting the hypothesised association between GMA and dream bizarreness. Studies with larger samples are needed to verify this association, and to determine the extent to which melatonin may be involved. Establishing that there is an association between GMA and dream bizarreness would have relevance for neurophysiological theories of dreaming, and for models of psychotic symptoms resembling bizarre dream events.

Radioactivity in houses built of aerated concrete based on alum shale

International Nuclear Information System (INIS)

Swedjemark, G.A.

1980-01-01

The highest activities in commonly used Swedish building materials are found in aerated concrete based on alum shale. The enhanced activity level is due to the high content of radium-226. The average activity concentration of radium-226 varies between different producers of aerated concrete based on alum shale from 700 Bq kg - (20 pCi g - ) to 2 400 Bq kg - (65 pCi g - ). Houses built in the same way with the same amounts of aerated concrete can therefore have very different gamma levels and very different concentrations of radon in the air with the same air exchange rate. Aerated concrete based on alum shale was used as a building material in Sweden from 1930 to 1975. The average concentration of radon daughters found in houses built of aerated concrete based to a major extent on alum shale is about 100 bq/m 3 (2.7 pCi 1 - ). The highest radon concentrations have been found in houses built entirely of aerated concrete based on alum shale. A group of 9 houses with natural draught ventilation systems has been investigated with regard to the concentration of radon, the equilibrium equivalent concentration of radon (EEC) and the gamma dose rate. The air exchange rates varied between the houses from 0.21 to 0.43 h - and the radon concentration from 540 Bq m - (15 pCi 1 - ) to 1 160 Bq m - (31 pCi 1 - ). The values given are averages for each house. (author)

The ANL X6B beamline at NSLS: A versatile facility

International Nuclear Information System (INIS)

Huang, K.G.; Ramanathan, M.; Montano, P.A.; Illinois Univ., Chicago, IL

1994-07-01

We have described the x-ray optics and beamline performance of the ANL X6B beam line at the NSLS. Considerable flexibility has been built into the beam line to accommodate a wide range of x-ray diffraction, scattering, and spectroscopy experiments with various requirements. We presented selected examples of experimental results and showed that with the high intensity, high energy resolution, high-q resolution, and energy tunability, the X6B beam line has become a versatile facility

Microprocessor-based system for automatic X-ray diffraction and fluorescence

International Nuclear Information System (INIS)

Souza, A.M. de; Carmo, L.C.S. do; Pereira, V.J.E.; Soares, E.A.

1984-01-01

A data acquisition and processing device appropriate for X-ray analysis and goniometer control was built. The Z-80 based system as well as the whole architeture is described. The advantages and new possibilities of the automated instrument as compared to the traditional ones are listed. The X-ray diffraction and fluorescence techniques can take advantage of the automation. (Author) [pt

Nonlinear photoluminescence of graded band-gap Al sub x Ga sub 1 sub - sub x As solid solutions

CERN Document Server

Kovalenko, V F; Shutov, S V

2002-01-01

The dependence of the photoluminescence (PL) intensity of undoped and doped graded band-gap Al sub x Ga sub 1 sub - sub x As (x <= 0.36) solid solutions on the excitation level J (1 x 10 sup 1 sup 9 <= J <= 1 x 10 sup 2 sup 2 quantum cm sup - sup 2 s) for different values of built-in quasi-electrical field E (85 <= E <= 700 V/cm) has been studied. It is found that the dependence of the near-band-edge PL intensity I in the excitation level J at an accelerating action of the field E has a complex character. The nonlinearity of I(J) dependence is explained by contribution of the two-photon absorption of the radiating recombination in the process of its remission. The optimum range of E values (120 <= E <= 200 V/cm) providing the greatest contribution of the two-photon absorption in the reemission in undoped solid solutions is determined

Pharmaceuticals in the Built and Natural Water Environment of the United States

Directory of Open Access Journals (Sweden)

Randhir P. Deo

2013-09-01

Full Text Available The known occurrence of pharmaceuticals in the built and natural water environment, including in drinking water supplies, continues to raise concerns over inadvertent exposures and associated potential health risks in humans and aquatic organisms. At the same time, the number and concentrations of new and existing pharmaceuticals in the water environment are destined to increase further in the future as a result of increased consumption of pharmaceuticals by a growing and aging population and ongoing measures to decrease per-capita water consumption. This review examines the occurrence and movement of pharmaceuticals in the built and natural water environment, with special emphasis on contamination of the drinking water supply, and opportunities for sustainable pollution control. We surveyed peer-reviewed publications dealing with quantitative measurements of pharmaceuticals in U.S. drinking water, surface water, groundwater, raw and treated wastewater as well as municipal biosolids. Pharmaceuticals have been observed to reenter the built water environment contained in raw drinking water, and they remain detectable in finished drinking water at concentrations in the ng/L to μg/L range. The greatest promises for minimizing pharmaceutical contamination include source control (for example, inputs from intentional flushing of medications for safe disposal, and sewer overflows, and improving efficiency of treatment facilities.

Sustainable built environments

CERN Document Server

Haase, Dagmar

2013-01-01

Sustainable design is a collective process whereby the built environment achieves unprecedented levels of ecological balance through new and retrofit construction, with the goal of long-term viability and humanization of architecture. Focusing on the environmental context, sustainable design merges the natural, minimum resource conditioning solutions of the past (daylight, solar heat, and natural ventilation) with the innovative technologies of the present.  The desired result is an integrated “intelligent” system that supports individual control with expert negotiation for resource consciousness. International experts in the field address the fundamental questions of sustainable design and landscape management: How should the sustainability of landscapes and buildings be evaluated? Which targets have to be set and which thresholds should not be exceeded? What forms of planning and governance structures exist and to what extent do they further the goals of sustainability?  Gathering 30 peer-reviewed ent...

Facilities and techniques for x-ray diagnostic calibration in the 100-eV to 100-keV energy range

International Nuclear Information System (INIS)

Gaines, J.L.; Wittmayer, F.J.

1986-01-01

The Lawrence Livermore National Laboratory (LLNL) has been a pioneer in the field of x-ray diagnostic calibration for more than 20 years. The authors built steady state x-ray sources capable of supplying fluorescent lines of high spectral purity in the 100-eV to 100-keV energy range, and these sources have been used in the calibration of x-ray detectors, mirrors, crystals, filters, and film. This paper discusses their calibration philosophy and techniques, and describes some of the x-ray sources. Examples of actual calibration data are presented as well

Facilities and Techniques for X-Ray Diagnostic Calibration in the 100-eV to 100-keV Energy Range

Science.gov (United States)

Gaines, J. L.; Wittmayer, F. J.

1986-08-01

The Lawrence Livermore National Laboratory (LLNL) has been a pioneer in the field of x-ray diagnostic calibration for more than 20 years. We have built steady state x-ray sources capable of supplying fluorescent lines of high spectral purity in the 100-eV to 100-keV energy range, and these sources have been used in the calibration of x-ray detectors, mirrors, crystals, filters, and film. This paper discusses our calibration philosophy and techniques, and describes some of our x-ray sources. Examples of actual calibration data are presented as well.

Facilities and techniques for x-ray diagnostic calibration in the 100-eV to 100-keV energy range

International Nuclear Information System (INIS)

Gaines, J.L.; Wittmayer, F.J.

1986-06-01

The Lawrence Livermore National Laboratory (LLNL) has been a pioneer in the field of x-ray diagnostic calibration for more than 20 years. We have built steady state x-ray sources capable of supplying fluorescent lines of high spectral purity in the 100-eV to 100-keV energy range, and these sources have been used in the calibration of x-ray detectors, mirrors, crystals, filters, and film. This paper discusses our calibration philosophy and techniques, and describes some of our x-ray sources. Examples of actual calibration data are presented as well

Characterization and equalization of the AC responses of the corrector magnets for the APS local orbit feedback system

Energy Technology Data Exchange (ETDEWEB)

Doose, C.; Kim, S.H.

1997-08-01

Local feedback for the APS storage ring uses local bumps to control the position and angle of the positron beam through each x-ray source point. Induced eddy currents in the aluminum vacuum chamber dominate the AC characteristics of the corrector magnetic fields. Small differences in the geometries at each magnet location change the eddy current effects and result in bump closure errors which must be reduced in order to minimize the coupling between each of the many local loops and the global control loop. By a combination of flux-damping coils, flux-shielding copper sheets, and a set of steel laminations for end-flux clamping, the differences of the eddy current effects between two corrector magnets were reduced from 0.18 Gm/A to 0.035 Gm/A in the frequency span of 0.1-100 Hz.

Energetics of the built environment

Energy Technology Data Exchange (ETDEWEB)

Yeang, K

1974-07-01

Energetics, the study of energy transformations within ecosystems, provide a useful framework for examining the relationships between the built environment (a manmade ecosystem) and the natural environment. Values are provided for using energy indices in modeling, comparing design alternatives, improving designed systems, conserving nonrenewable resources, comparing impacts, and studying energy utilization patterns as a whole. The accounting of the energy cost of a proposed project would provide additional criteria for evaluating the impact of human developments on the natural environment. (3 diagrams, 12 tables)

Adherence to the Food and Agricultural Organization guidelines on trypanocide usage among cattle farmers in Itezhi tezhi, Central Zambia.

Science.gov (United States)

Mbewe, Njelembo J; Sitali, Lungowe; Namangala, Boniface; Michelo, Charles

2015-04-15

Trypanocides will continue to play an important role in the control of tsetse fly transmitted trypanosomosis now and in the near future. The drugs are mostly administered by farmers without any veterinary supervision leading to misuse and under dosing of medication, and these could be factors that promote trypanocidal drug resistance (TDR) development. In order to delay or prevent TDR, the Food and Agriculture Organization (FAO) recommended guidelines on trypanocide use. It is not known if these recommended guidelines are adhered to in Itezhi tezhi district of Zambia. A survey was undertaken to examine how socio-economic and environmental factors were associated with adherence to the recommended guidelines on trypanocide use in Itezhi tezhi, Central Zambia. Ninety farmers who use trypanocides were interviewed using a questionnaire to collect their socio-economic characteristics (age, education in years, cattle herd size, competence on trypanocide use and their access to extension on trypanocide use) and trypanocide usage practices while crush pens which they use were stratified according to location, whether in the Game Management Area (GMA) (Mutenda, Itumbi, Kapulwe and Banachoongo) or non-GMA (Iyanda, New Ngoma and Shinampamba) as an environmental factor. Associations and measures of associations to adherence of FAO guidelines were determined. The results showed that 25.6% of the farmers adhered to guidelines by FAO on trypanocide use and that none of the socio-economic factors under investigation were significantly associated with it. Further the farmers that used crush pens that were in the GMA had an 80% reduction in the likelihood of adhering to the FAO guidelines on trypanocide use than those that used crush pens in the non-GMA (AOR 0.20, 95% CI: 0.05-0.81, P=0.02). There was low adherence to the recommended FAO guidelines on trypanocide use and it was associated with the location of the crush pen whether in the GMA or not, as an environmental factor. With

Confirmation of a second EPR to be built at Penly

International Nuclear Information System (INIS)

Anon.

2009-01-01

The French government has made public its decision to launch the construction of a second EPR in France. This EPR is planned to be built on the Penly site (northern region of France). EDF will manage this project but other investors like GDF-Suez are invited to participate. The construction works are planned to begin in 2012 for a commissioning in 2017. This reactor will be the fifth EPR being built in the world. (A.C.)

A Superconducting Tunnel Junction X-ray Spectrometer without Liquid Cryogens

International Nuclear Information System (INIS)

Friedrich, S.; Hertrich, T.; Drury, O.B.; Cherepy, N.J.; Hohne, J.

2008-01-01

Superconducting tunnel junctions (STJs) are being developed as X-ray detectors because they combine the high energy resolution of cryogenic detector technologies with the high count rate capabilities of athermal devices. We have built STJ spectrometers for chemical analysis of dilute samples by high-resolution soft X-ray spectroscopy at the synchrotron. The instruments use 36 pixels of 200 (micro)m x 200 (micro)m Nb-Al-AlOx-Al-Nb STJs with 165 nm thick Nb absorber films. They have achieved an energy resolution of ∼10-20 eV FWHM for X-ray energies below 1 keV, and can be operated at a total count rate of ∼10 6 counts/s. For increased user-friendliness, we have built a liquid-cryogen-free refrigerator based on a two-stage pulse tube cryocooler in combination with a two-stage adiabatic demagnetization stage. It holds the STJ detector at the end of a 40-cm-long cold finger, and attains the required operating temperature of ∼0.3 K at the push of a button. We describe the instrument performance and present speciation measurements on Eu dopant activators in the novel scintillator material SrI 2 to illustrate the potential for STJ spectrometers at the synchrotron

High intensity line source for x-ray spectrometer calibration

International Nuclear Information System (INIS)

Thoe, R.S.

1986-06-01

A high intensity electron-impact x-ray source using a one-dimensional Pierce lens has been built for the purpose of calibrating a bent crystal x-ray spectrometer. This source focuses up to 100 mA of 20-keV electrons to a line on a liquid-cooled anode. The line (which can serve as a virtual slit for the spectrometer) measures approximately 800 μ x 2 cm. The source is portable and therefore adaptable to numerous types of spectrometer applications. One particular application, the calibration of a high resolution (r = 10 4 ) time-resolved cyrstal spectrometer, will be discussed in detail

Topological phases in Ba-Borate glasses

Science.gov (United States)

Holbrook, Chad; Czaja, Andrew; Boolchand, Punit

2015-03-01

Twelve compositions in the (BaO)x(B2O3)100-x pseudo binary, in the 15% Modulated- DSC and Raman scattering experiments were undertaken systematically as function of BaO content (x). Calorimetric measurements reveal Tg(x) to show a broad maximum and the non-reversing enthalpy to show a Gaussian-like reversibility window2, both centered near x = 28%. Raman scattering displays rich lineshapes with modes similar to those observed in Na-Borates2. Modes near 808 cm-1, 770 cm-1, 740 cm-1 and 705 cm-1 are observed, and identified with breathing modes of pure and mixed rings from characteristic structural groupings2. These preliminary results suggest that glasses at x 30% in the flexible phase. Supported by NSF Grant DMR 08-53957.

Measurement of Subsidence in the Yangbajain Geothermal Fields from TerraSAR-X

Science.gov (United States)

Li, Yongsheng; Zhang, Jingfa; Li, Zhenhong

2016-08-01

Yangbajain contains the largest geothermal energy power station in China. Geothermal explorations in Yangbajain first started in 1976, and two plants were subsequently built in 1981 and 1986. A large amount of geothermal fluids have been extracted since then, leading to considerable surface subsidence around the geothermal fields. In this paper, InSAR time series analysis is applied to map the subsidence of the Yangbajain geothermal fields during the period from December 2011 to November 2012 using 16 senses of TerraSAR-X stripmap SAR images. Due to its high resolution and short repeat cycle, TerraSAR-X provides detailed surface deformation information at the Yangbajain geothermal fields.

Megasite Management Tool (mmt): a Decision Support System Built Using Mapwindow Activex Control

Science.gov (United States)

Pulsani, B. R.

2017-11-01

Megasite Management Tool (MMT) is planning and evaluation software for contaminated sites. Using different statistical modules, MMT produces maps which help decision makers in rehabilitating contaminated sites. The input data used by MMT is of geographic nature and exists as shapefile and raster format. As MMT is built using simple windows forms application, the objective of the study was to find a way to visualize geographic data and to allow the user to edit its attribute information. Therefore, the application requirement was to find GIS libraries which offer capabilities such as (1) map viewer with navigation tools (2) library to read/write geographic data and (3) software which allows free distribution of the developed components. A research on these requirements led to the discovery of MapWindow ActiveX components which not only offered these capabilities but also provided free and open source licensing options for redistribution. Although considerable amount of reports and publications exist on MMT, the major contribution provided by MapWindow libraries have been under played. The current study emphasises upon the contribution and advantages MapWindow ActiveX provides for incorporating GIS functionality to an already existing application. Similar components for other languages have also been reviewed.

Domestic offset projects in the built environment

Energy Technology Data Exchange (ETDEWEB)

Oikonomou, V.; Spijker, E.; Van der Gaast, W. [Joint Implementation Network, Laan Corpus den Hoorn 300, 9728JT Groningen (Netherlands); Flamos, A.; Spyridaki, N.A. [Department of Industrial Management, University of Piraeus, Karaoli and Dimitriou 80 Str, 185 34 Piraeus (Greece)

2012-08-15

Emission reduction activities in the European Union (EU) in- and outside the European Trading System (ETS) thus far have largely taken place separately. One possibility to combine the two is through linking Non-ETS offset project-based crediting schemes in the form of Joint Implementation or domestic offset (DO) projects with the EU ETS. Linking would allow non-ETS offset project-based CO2 credits to be traded within the ETS market. This paper discusses the merits and drawbacks of the implementation of a DO scheme in the built environment in the Netherlands. The built environment can be characterised as a sector with a great diversity and significant energy savings potential. Emphasis is paid on the modalities for estimating energy savings under DO projects. The authors discuss if next to existing EU, national or regional policies in the Netherlands, DO could spur initiatives in sub-sectors or market areas that are difficult to reach with conventional policy instruments. Thus, despite the existing policy framework in this sector, there could be still space for DO to reach the untapped energy savings potential. DO can support activities and technologies that are not covered by other policy instruments, either because they are not part of the instruments focus or are above the minimum requirements of the incumbent policy targets. It is expected that some lessons from this study in the Netherlands can be taken into account also by other countries facing similar market circumstances, which have implemented several policy instruments and are considering DO schemes as an alternative for capturing part of the untapped energy saving potential in their end use sectors. Another possible advantage of DO is that it has the potential to reduce public spending on existing policy goals, when it is considered in conjunction with existing public financing instruments. In order to tap into this potential, there are a series of hurdles in place, like additionality and the current CO2

Konsensusstatement "Praktische Fertigkeiten im Medizinstudium" – ein Positionspapier des GMA-Ausschusses für praktische Fertigkeiten [A Consensus Statement on Practical Skills in Medical School – a position paper by the GMA Committee on Practical Skills

Directory of Open Access Journals (Sweden)

Schnabel, Kai P.

2011-11-01

standardisieren. Auf Initiative der deutschsprachigen Skills Labs wurde der GMA-Ausschuss für praktische Fertigkeiten gegründet, der einen kompetenzbasierten Lernzielkatalog entwickelte, dessen Entstehung und Struktur hier beschrieben wird.Ziel des Kataloges ist es, die praktischen Fertigkeiten im Medizinstudium zu definieren und damit den Fakultäten eine rationale Planungsgrundlage für die zur Vermittlung praktischer Fertigkeiten notwendigen Ressourcen zu geben.Methodik: Aufbauend auf schon vorhandenen deutschsprachigen Lernzielkatalogen wurde mittels einem mehrfach iterativem Kondensationsprozesses, der der Erarbeitung von S1-Leitlinien entspricht, vorgegangen, um eine breite fachliche und politische Abstützung zu erhalten. Ergebnisse: Es wurden 289 verschiedene praktische Lernziele identifiziert, die zwölf verschiedenen Organsystemen, drei Grenzbereichen zu anderen Kompetenzbereichen und einem Bereich mit organsystemübergreifenden Fertigkeiten zugeordnet. Sie wurden drei verschiedenen zeitlichen und drei verschiedenen Tiefendimensionen zugeordnet und mit dem Schweizer und dem Österreichischem Pendant abgeglichen. Diskussion: Das vorliegende Konsensusstatement kann den deutschen Fakultäten eine Grundlage zur Planung der Vermittlung praktischer Fertigkeiten bieten und bildet einen wichtigen Schritt zu einem nationalen Standard medizinischer Lernziele.Blick in die Zukunft: Das Konsensusstatement soll einen formativen Effekt auf die medizinischen Fakultäten haben, ihre praktischen Unterrichtsinhalte entsprechend zu vermitteln und die Ressourcen danach zu planen.

Mutation of Asp(171) and Asp(262) of the chemokine receptor CXCR4 impairs its coreceptor function for human immunodeficiency virus-1 entry and abrogates the antagonistic activity of AMD3100

DEFF Research Database (Denmark)

Hatse, S; Princen, K; Gerlach, L O

2001-01-01

by mutational analysis. We established a set of stably transfected U87.CD4 cell lines expressing different mutant forms of CXCR4 (i.e., CXCR4[WT], CXCR4[D171N], CXCR4[D262N], CXCR4[D171N,D262N], and CXCR4[H281A]), to compare the activity of the compound against mutated versus wild-type CXCR4. We found...... by substitution of Asp(171) and/or Asp(262) by neutral asparagine residue(s). Both aspartates, but most particularly Asp(262), also proved essential for the anti-HIV-1 activity of AMD3100 against the viruses NL4.3, IIIB, and HE. In contrast, substitution of His(281) by a neutral alanine potentiated...

Using built environment characteristics to predict walking for exercise

Directory of Open Access Journals (Sweden)

Siscovick David S

2008-02-01

Full Text Available Abstract Background Environments conducive to walking may help people avoid sedentary lifestyles and associated diseases. Recent studies developed walkability models combining several built environment characteristics to optimally predict walking. Developing and testing such models with the same data could lead to overestimating one's ability to predict walking in an independent sample of the population. More accurate estimates of model fit can be obtained by splitting a single study population into training and validation sets (holdout approach or through developing and evaluating models in different populations. We used these two approaches to test whether built environment characteristics near the home predict walking for exercise. Study participants lived in western Washington State and were adult members of a health maintenance organization. The physical activity data used in this study were collected by telephone interview and were selected for their relevance to cardiovascular disease. In order to limit confounding by prior health conditions, the sample was restricted to participants in good self-reported health and without a documented history of cardiovascular disease. Results For 1,608 participants meeting the inclusion criteria, the mean age was 64 years, 90 percent were white, 37 percent had a college degree, and 62 percent of participants reported that they walked for exercise. Single built environment characteristics, such as residential density or connectivity, did not significantly predict walking for exercise. Regression models using multiple built environment characteristics to predict walking were not successful at predicting walking for exercise in an independent population sample. In the validation set, none of the logistic models had a C-statistic confidence interval excluding the null value of 0.5, and none of the linear models explained more than one percent of the variance in time spent walking for exercise. We did not

Emotion recognition based on customized smart bracelet with built-in accelerometer

Directory of Open Access Journals (Sweden)

Zhan Zhang

2016-07-01

Full Text Available Background: Recently, emotion recognition has become a hot topic in human-computer interaction. If computers could understand human emotions, they could interact better with their users. This paper proposes a novel method to recognize human emotions (neutral, happy, and angry using a smart bracelet with built-in accelerometer. Methods: In this study, a total of 123 participants were instructed to wear a customized smart bracelet with built-in accelerometer that can track and record their movements. Firstly, participants walked two minutes as normal, which served as walking behaviors in a neutral emotion condition. Participants then watched emotional film clips to elicit emotions (happy and angry. The time interval between watching two clips was more than four hours. After watching film clips, they walked for one minute, which served as walking behaviors in a happy or angry emotion condition. We collected raw data from the bracelet and extracted a few features from raw data. Based on these features, we built classification models for classifying three types of emotions (neutral, happy, and angry. Results and Discussion: For two-category classification, the classification accuracy can reach 91.3% (neutral vs. angry, 88.5% (neutral vs. happy, and 88.5% (happy vs. angry, respectively; while, for the differentiation among three types of emotions (neutral, happy, and angry, the accuracy can reach 81.2%. Conclusions: Using wearable devices, we found it is possible to recognize human emotions (neutral, happy, and angry with fair accuracy. Results of this study may be useful to improve the performance of human-computer interaction.

Surface treatment of poly(ethylene terephthalate) by gamma-ray induced graft copolymerization of methyl acrylate and its toughening effect on poly(ethylene terephthalate)/elastomer blend

International Nuclear Information System (INIS)

Ma, Liang; Wang, Mozhen; Ge, Xuewu

2013-01-01

To improve the compatibility between ethylene-methyl acrylate-glycidyl methacrylate random terpolymer (E-MA-GMA) elastomer and poly(ethylene terephthalate) (PET), thereby enhance the toughening effect of E-MA-GMA on PET, γ-radiation-induced graft copolymerization technique was used to graft methyl acrylate (MA) monomer onto PET. The produced PET-g-PMA copolymer can be used as a self-compatibilizer in PET/E-MA-GMA blend since the copolymer contains the same segments, respectively, with PET and E-MA-GMA. The impact strength of PET/E-MA-GMA blend increased nearly by 30% in the presence of less than 0.1 wt% PET-g-PMA compared with that of the neat PET/elastomer blend, without loss of the tensile strength of the blends. This work proposed a potential application of radiation-induced grafting copolymerization technique on the in-situ compatibilization of PET/elastomer blends so as to improve the integral mechanical properties of PET based engineering plastic. - Highlights: • PMA was grafted onto PET resins by γ-ray radiation-induced copolymerization. • The obtained PET-g-PMA can improve the compatibility between PET and E-MA-GMA. • A small amount of PET-g-PMA can enhance the impact strength of PET/E-MA-GMA blend

Representation of Block-Based Image Features in a Multi-Scale Framework for Built-Up Area Detection

Directory of Open Access Journals (Sweden)

Zhongwen Hu

2016-02-01

Full Text Available The accurate extraction and mapping of built-up areas play an important role in many social, economic, and environmental studies. In this paper, we propose a novel approach for built-up area detection from high spatial resolution remote sensing images, using a block-based multi-scale feature representation framework. First, an image is divided into small blocks, in which the spectral, textural, and structural features are extracted and represented using a multi-scale framework; a set of refined Harris corner points is then used to select blocks as training samples; finally, a built-up index image is obtained by minimizing the normalized spectral, textural, and structural distances to the training samples, and a built-up area map is obtained by thresholding the index image. Experiments confirm that the proposed approach is effective for high-resolution optical and synthetic aperture radar images, with different scenes and different spatial resolutions.

An InGrid based Low Energy X-ray Detector

CERN Document Server

Krieger, Christoph; Kaminski, Jochen; Lupberger, Michael; Vafeiadis, Theodoros

2014-01-01

An X-ray detector based on the combination of an integrated Micromegas stage with a pixel chip has been built in order to be installed at the CERN Axion Solar Telescope. Due to its high granularity and spatial resolution this detector allows for a topological background suppression along with a detection threshold below $1\\,\\text{keV}$. Tests at the CAST Detector Lab show the detector's ability to detect X-ray photons down to an energy as low as $277\\,\\text{eV}$. The first background data taken after the installation at the CAST experiment underline the detector's performance with an average background rate of $5\\times10^{-5}\\,/\\text{keV}/\\text{cm}^2/\\text{s}$ between 2 and $10\\,\\text{keV}$ when using a lead shielding.

Peak heart rate decreases with increasing severity of acute hypoxia

DEFF Research Database (Denmark)

Lundby, C; Araoz, M; Van Hall, Gerrit

2001-01-01

, 459, and 404 mmHg) in a hypobaric chamber and while breathing 9% O(2) in N(2). These conditions were equivalent to altitudes of 3300, 4300, 5300, and 6300 m above sea level, respectively. At 4300 m, maximal exercise was also repeated after 4 and 8 h. Peak heart rate (HR) decreased from 191 (182......-202) (mean and range) at sea level to 189 (179-200), 182 (172-189), 175 (166-183), and 165 (162-169) in the acute hypoxic conditions. Peak HR did not decrease further after 4 and 8 h at 4300 m compared to the acute exposure at this altitude. Between barometric pressures of 518 and 355 mmHg (approximately...... 3300 and 6300 m), peak HR decreased linearly: peak HR(hypobaria) = peak HR(sea level) - 0.135 x [hypobaria(3100) - hypobaria (mmHg)]; or peak HR(altitude) = peak HR(sea level) - 0.15 x (altitude - 3100 m). This corresponds to approximately 1-beat x min(-1) reduction in peak HR for every 7-mmHg decrease...

Exploring the Role of the Built and Social Neighborhood Environment in Moderating Stress and Health

Science.gov (United States)

Yang, Tse-Chuan

2014-01-01

Background Health researchers have explored how different aspects of neighborhood characteristics contribute to health and well-being, but current understanding of built environment factors is limited. Purpose This study explores whether the association between stress and health varies by residential neighborhood, and if yes, whether built and social neighborhood environment characteristics act as moderators. Methods This study uses multilevel modeling and variables derived from geospatial data to explore the role of neighborhood environment in moderating the association of stress with health. Individual-level data (N=4,093) were drawn from residents of 45 neighborhoods within Philadelphia County, PA, collected as part of the 2006 Philadelphia Health Management Corporation's Household Health Survey. Results We find that the negative influence of high stress varied by neighborhood, that residential stability and affluence (social characteristics) attenuated the association of high stress with health, and that the presence of hazardous waste facilities (built environment characteristics) moderated health by enhancing the association with stress. Conclusions Our findings suggest that neighborhood environment has both direct and moderating associations with health, after adjusting for individual characteristics. The use of geospatial data could broaden the scope of stress–health research and advance knowledge by untangling the intertwined relationship between built and social environments, stress, and health. In particular, future studies should integrate built environment characteristics in health-related research; these characteristics are modifiable and can facilitate health promotion policies. PMID:20300905

Built-in unit with short-circuit insulation for hermetic cable ducts

International Nuclear Information System (INIS)

Tschacher, B.; Gurr, W.; Kusserow, J.; Katzmarek, W.

1984-01-01

The invention concerns a built-in unit with short-circuit insulation for hermetic cable ducts, especially for containments of nuclear power reactors. The short-circuit insulation is achieved by an insulation plate made from radiation-resistant insulating materials of high mechanical strength

Application of PIN photodiodes on the detection of X-rays generated in an electron accelerator

International Nuclear Information System (INIS)

Mondragon-Contreras, L.; Ramirez-Jimenez, F.J.; Garcia-Hernandez, J.M.; Torres-Bribiesca, M.A.; Lopez-Callejas, R.; Aguilera-Reyes, E.F.; Pena-Eguiluz, R.; Lopez-Valdivia, H.; Carrasco-Abrego, H.

2009-01-01

PIN photodiodes are used in a novel application for the determination, within the energy range from 90 to 485 keV, of the intensity of X-rays generated by an experimental electron accelerator. An easily assembled X-ray monitor has been built with a low-cost PIN photodiode and operational amplifiers. The output voltage signal obtained from this device can be related to the electron beam current and the accelerating voltage of the accelerator in order to estimate the dose rate delivered by bremsstrahlung.

Policy, Research and Residents’ Perspectives on Built Environments Implicated in Heart Disease: A Concept Mapping Approach

Directory of Open Access Journals (Sweden)

Ivana Stankov

2017-02-01

Full Text Available An underrepresentation of stakeholder perspectives within urban health research arguably limits our understanding of what is a multi-dimensional and complex relationship between the built environment and health. By engaging a wide range of stakeholders using a participatory concept mapping approach, this study aimed to achieve a more holistic and nuanced understanding of the built environments shaping disease risk, specifically cardiometabolic risk (CMR. Moreover, this study aimed to ascertain the importance and changeability of identified environments through government action. Through the concept mapping process, community members, researchers, government and non-government stakeholders collectively identified eleven clusters encompassing 102 built environmental domains related to CMR, a number of which are underrepresented within the literature. Among the identified built environments, open space, public transportation and pedestrian environments were highlighted as key targets for policy intervention. Whilst there was substantive convergence in stakeholder groups’ perspectives concerning the built environment and CMR, there were disparities in the level of importance government stakeholders and community members respectively assigned to pedestrian environments and street connectivity. These findings support the role of participatory methods in strengthening how urban health issues are understood and in affording novel insights into points of action for public health and policy intervention.

A Search for Periodicity in the X-Ray Spectrum of Black Hole Candidate A0620-00

Science.gov (United States)

1991-06-01

neutron star mass in some models. Secondly, since it is in the Large Magellanic Cloud , its distance is known to be d = 55 kpc with small uncertainty...neutron star. This study sparked interest in A0620-00 as a black hole binary system. In this paper , we analyze the X-ray data obtained from the...detectors on the SAS-3 X-Ray Observatory, the instrumentation for which was designed and built at the MIT Center for Space Research . We use these data to

Solar Biogas Digester with Built-In Reverse Absorber Heater

Directory of Open Access Journals (Sweden)

Khasan S. Karimov

2013-01-01

Full Text Available In this work the design, fabrication and investigation of a solar biogas digester with built-in RAH (Reverse Absorber Heater is presented. The maximum temperature (50 o C inside of the methane tank was taken as a main parameter at the design of the digester. Using energy balance equation for the case of a static mass of fluid being heated; the parameters of thermal insulation of the methane tank were counted. The biogas digester is consisting of methane tank with built-in solar RAH to utilize solar energy for the heating of the slurry prepared from the different organic wastes (dung, sewage, food wastes etc. The methane tank was filled up to 70% of volume by organic wastes of the GIK Institute sewage, firstly, and secondly, by sewage and cow dung as well. During three months (October-December, 2009 and two months (February-March, 2010 the digester was investigated. The solar irradiance incident to the absorber, slurry's temperature and ambient temperature were measured. It was found that using sewage only and sewage with cow dung the retention times was 4 weeks and two weeks respectively and biogas quantity produced was 0.4 and 8.0 m 3 respectively. In addition, biogas upgradation scheme for removal of carbon dioxide, hydrogen sulphide and water vapor from biogas and conversion of biogas energy conversion into electric power is also discussed.

Environmental assessments in the built environment: crucial yet underdeveloped

Science.gov (United States)

Heinonen, Jukka; Horvath, Arpad; Junnila, Seppo

2015-03-01

Environmental assessments have been developed with increasing emphasis since the wide-scale emergence of environmental concerns in the 1970s. However, after decades there is still plenty of room left for development. These assessments are also rapidly becoming more and more crucial as we seem to be reaching the boundaries of the carrying capacity of our planet. Assessments of the emissions from the built environment and especially of the interactions between human communities and emissions are in a very central role in the quest to solve the great problem of sustainable living. Policy- makers and professionals in various fields urgently need reliable data on the current conditions and realistic future projections, as well as robust and scientifically defensible models for decision making. This recognition was the main motivation to call for this Focus Issue, and the published contributions truly highlight the same point. This editorial provides brief summaries and discussions on the 16 articles of the Focus Issue, depicting the several interesting perspectives they offer to advance the state of the art. Now we encourage academics, practitioners, government, industry, individual consumers, and other decision makers to utilize the available findings and develop the domain of environmental assessment of the built environment further. Indeed, we hope that this Focus Issue is merely a kernel of a significantly large future body of literature.

The effects of the urban built environment on the spatial distribution of lead in residential soils.

Science.gov (United States)

Schwarz, K; Pickett, Steward T A; Lathrop, Richard G; Weathers, Kathleen C; Pouyat, Richard V; Cadenasso, Mary L

2012-04-01

Lead contamination of urban residential soils is a public health concern. Consequently, there is a need to delineate hotspots in the landscape to identify risk and facilitate remediation. Land use is a good predictor of some environmental pollutants. However, in the case of soil lead, research has shown that land use is not a useful proxy. We hypothesize that soil lead is related to both individual landscape features at the parcel scale and the landscape context in which parcels are embedded. We sampled soil lead on 61 residential parcels in Baltimore, Maryland using field-portable x-ray fluorescence. Thirty percent of parcels had average lead concentrations that exceeded the USEPA limit of 400 ppm and 53% had at least one reading that exceeded 400 ppm. Results indicate that soil lead is strongly associated with housing age, distance to roadways, and on a parcel scale, distance to built structures. Copyright © 2011 Elsevier Ltd. All rights reserved.

Transformers: Shape-Changing Space Systems Built with Robotic Textiles

Science.gov (United States)

Stoica, Adrian

2013-01-01

Prior approaches to transformer-like robots had only very limited success. They suffer from lack of reliability, ability to integrate large surfaces, and very modest change in overall shape. Robots can now be built from two-dimensional (2D) layers of robotic fabric. These transformers, a new kind of robotic space system, are dramatically different from current systems in at least two ways. First, the entire transformer is built from a single, thin sheet; a flexible layer of a robotic fabric (ro-fabric); or robotic textile (ro-textile). Second, the ro-textile layer is foldable to small volume and self-unfolding to adapt shape and function to mission phases.

Overview of diagnostic performance and results for the first operation phase in Wendelstein 7-X (invited)

NARCIS (Netherlands)

Krychowiak, M.; Adnan, A.; Alonso, A.; Andreeva, T.; Baldzuhn, J.; Barbui, T.; Beurskens, Marc N.A.; Biel, W.; Biedermann, C.; Blackwell, B.D.; Bosch, H.S.; Bozhenkov, S.; Brakel, R.; Bräuer, T.; Brotas de Carvalho, B.; Burhenn, R.; Buttenschön, B.; Cappa, A.; Cseh, G.; Czarnecka, A.; Dinklage, A.; Drews, P.; Dzikowicka, A.; Effenberg, F.; Endler, M.; Erckmann, V.; Estrada, T.; Ford, O.; Fornal, T.; Frerichs, H.; Fuchert, G.; Geiger, J.; Grulke, O.; Harris, J.H.; Hartfuß, H.J.; Hartmann, D.; Hathiramani, D.; Hirsch, M.; Höfel, U.; Jabłoński, S.; Jakubowski, M.W.; Kaczmarczyk, J.; Klinger, T.; Klose, S.; Knauer, J.; Kocsis, G.; König, R.; Kornejew, P.; Krämer-Flecken, A.; Krawczyk, N.; Kremeyer, T.; Ksiazek, I.; Kubkowska, M.; Langenberg, A.; Laqua, H.P.; Laux, M.; Lazerson, S.; Liang, Y.; Liu, S.C.; Lorenz, A.; Marchuk, A.O.; Marsen, S.; Moncada, V.; Naujoks, D.; Neilson, H.; Neubauer, O.; Neuner, U.; Niemann, H.; Oosterbeek, J.W.; Otte, M.; Pablant, N.; Pasch, E.; Sunn Pedersen, T.; Pisano, F.; Rahbarnia, K.; Ryć, L.; Schmitz, O.; Schmuck, S.; Schneider, W.; Schröder, T.; Schuhmacher, H.; Schweer, B.; Standley, B.; Stange, T.; Stephey, L.; Svensson, J.; Szabolics, T.; Szepesi, T.; Thomsen, H.; Travère, J.M.; Trimino Mora, H.; Tsuchiya, H.; Weir, G.M.; Wenzel, U.; Werner, A.; Wiegel, B.; Windisch, T.; Wolf, R.; Wurden, G.A.; Zhang, D.; Zimbal, A.; Zoletnik, S.

2016-01-01

Wendelstein 7-X, a superconducting optimized stellarator built in Greifswald/Germany, started its first plasmas with the last closed flux surface (LCFS) defined by 5 uncooled graphite limiters in December 2015. At the end of the 10 weeks long experimental campaign (OP1.1) more than 20 independent

X-ray absorption in characterization of laser fusion targets

International Nuclear Information System (INIS)

Clement, X.; Coudeville, A.; Eyharts, P.; Perrine, J.P.; Rouillard, R.

1982-11-01

Many plastic or metal coated targets are opaque, so their thickness and thickness uniformity cannot be obtained by optical means. Therefore, we have built and tested a new system using monochromatic X-ray absorption measurements. This system is also able to perform non-destructive measurements of argon fill pressure in glass microballoons. The X-ray source is a diffraction tube with a chromium target and fine focus (0.4 x 0.8 mm 2 ). Since monochromatic calculations are involved in this method, we use electronic discrimination to isolate the chromium Kα line (5.4 keV) from the bremsstrahlung spectrum. The detectors are xenon-filled proportional counters. The system is composed of two beams (10 μm in diameter), one used as a reference and the other as the measurement arm. A PET desk computer is coupled ot the experiment. We achieved a precision better than 10% for gold layers in the range of 0.1 to 1 μm, and better than 20% for argon pressures in the range of 5 - 13 bars

A Longitudinal Study of Objectively Measured Built Environment as Determinant of Physical Activity in Young Adults

DEFF Research Database (Denmark)

Schipperijn, Jasper; Ried-Larsen, Mathias; Nielsen, Merete S

2015-01-01

in the Danish part of the European Youth Hearth Study (EYHS) was used to examine the effect of the built environment on PA. A MI was developed using objectively measured built environment characteristics, and included residential density, recreational facilities, daily destinations and street connectivity...

From the Ground Up: Art in American Built Environment Education.

Science.gov (United States)

Guilfoil, Joanne K.

2000-01-01

Provides a case for teaching children about local architecture. Describes a specific example called the Kentucky Project as a humanist approach to built environmental education that enabled middle and high school students to study their architectural heritage through a program of videos and related teaching materials. (CMK)

A meta-analysis of the relationship between general mental ability and nontask performance.

Science.gov (United States)

Gonzalez-Mulé, Erik; Mount, Michael K; Oh, In-Sue

2014-11-01

Although one of the most well-established research findings in industrial-organizational psychology is that general mental ability (GMA) is a strong and generalizable predictor of job performance, this meta-analytically derived conclusion is based largely on measures of task or overall performance. The primary purpose of this study is to address a void in the research literature by conducting a meta-analysis to determine the direction and magnitude of the correlation of GMA with 2 dimensions of nontask performance: counterproductive work behaviors (CWB) and organizational citizenship behaviors (OCB). Overall, the results show that the true-score correlation between GMA and CWB is essentially 0 (-.02, k = 35), although rating source of CWB moderates this relationship. The true-score correlation between GMA and OCB is positive but modest in magnitude (.23, k = 43). The 2nd purpose of this study is to conduct meta-analytic relative weight analyses to determine the relative importance of GMA and the five-factor model (FFM) of personality traits in predicting nontask and task performance criteria. Results indicate that, collectively, the FFM traits are substantially more important for CWB than GMA, that the FFM traits are roughly equal in importance to GMA for OCB, and that GMA is substantially more important for task and overall job performance than the FFM traits. Implications of these findings for the development of optimal selection systems and the development of comprehensive theories of job performance are discussed along with study limitation and future research directions. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

29 CFR Appendix A to Subpart X of... - Ladders

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Ladders A Appendix A to Subpart X of Part 1926 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... designed and built in accordance with the applicable national consensus standards, as set forth below, will...

Positron trapping defects in free-volume investigation of Ge–Ga–S–CsCl glasses

International Nuclear Information System (INIS)

Klym, H.; Ingram, A.; Shpotyuk, O.; Hotra, O.; Popov, A.I.

2016-01-01

Evolution of free-volume positron trapping defects caused by crystallization process in (80GeS_2–20Ga_2S_3)_1_0_0_−_x(CsCl)_x, 0 ≤ x ≤ 15 chalcogenide-chalcohalide glasses was studied by positron annihilation lifetime technique. It is established that CsCl additives in Ge–Ga–S glassy matrix transform defect-related component spectra, indicating that the agglomeration of free-volume voids occurs in initial and crystallized (80GeS_2–20Ga_2S_3)_1_0_0_−_x(CsCl)_x, 0 ≤ x ≤ 10 glasses. Void fragmentation in (80GeS_2–20Ga_2S_3)_8_5(CsCl)_1_5 glass can be associated with loosing of their inner structure. Full crystallization in each of these glasses corresponds to the formation of defect-related voids. These trends are confirmed by positron-positronium decomposition algorithm. It is shown, that CsCl additives result in white shift in the visible regions in transmission spectra. The γ-irradiation of 80GeS_2–20Ga_2S_3 base glass leads to slight long-wavelength shift of the fundamental optical absorption edge and decreasing of transmission speaks in favor of possible formation of additional defects in glasses and their darkening. - Highlights: • CsCl additives in Ge–Ga–S glassy matrix lead to the agglomeration of voids. • Full crystallization of Ge–Ga–S–CsCl glasses corresponds to the formation of defect voids. • Gamma-irradiation of glass stimulates the creation of additional defects and darkening.

Weathering of stone-built heritage: A lens through which to read the Anthropocene

OpenAIRE

Gómez-Heras, Miguel; McCabe, Stephen

2015-01-01

This paper discusses how the study of stone-built heritage decay is relevant in the context of the Anthropocene by raising the complex two-way interplay between stone and society. Natural and built stone heritage is an asset that is vulnerable to present and future climate change. Especially in the context of built heritage, stone can also be conceptualized as a “large scale laboratory” in which the evolution of weathering, and thus past exposure conditions, can be studied (analogous to physi...

Toxicological findings in fatally injured pilots of 979 amateur-built aircraft accidents.

Science.gov (United States)

2011-12-01

"Biological samples collected from fatally injured pilots in aviation accidents involving all types of aircraft, including : amateur-built aircraft, are submitted to the Civil Aerospace Medical Institute (CAMI) for accident investigation. : These sam...

The Built Environment and Child Health: An Overview of Current Evidence.

Science.gov (United States)

Gascon, Mireia; Vrijheid, Martine; Nieuwenhuijsen, Mark J

2016-09-01

Urbanization and the shaping of the built environment have provided a number of socioeconomic benefits, but they have also brought unwanted side effects on health. We aimed to review the current epidemiological evidence of the associations between the built environment, closely related exposures, and child health. We focused on growth and obesity, neuropsychological development, and respiratory and immune health. We used existing review articles and supplemented these with relevant work published and not included in existing reviews. The present review shows that there is good evidence for an association between air pollution and fetal growth restriction and respiratory health, whereas for other exposure and outcome combinations, further evidence is needed. Future studies should make efforts to integrate the different built environment features and to include the evaluation of environments other than home, as well as accessibility, qualitative and perception assessment of the built environment, and, if possible, with improved and standardized tools to facilitate comparability between studies. Efforts are also needed to conduct longitudinal and intervention studies and to understand potential mechanisms behind the associations observed. Finally, studies in low- and middle-income countries are needed.

Grapho-Morphological Awareness in Spanish L2 Reading: How Do Learners Use This Metalinguistic Skill?

Science.gov (United States)

Miguel, Nausica Marcos

2012-01-01

This paper contributes to the literature on the transferability of grapho-morphological awareness (GMA) for second language (L2) learners by analysing L2 learners' knowledge of morphology in reading. GMA helps readers to identify grammatical categories, infer meanings of unfamiliar words, and access stored lexical information. Previous research…

Creating neighbourhood groupings based on built environment features to facilitate health promotion activities.

Science.gov (United States)

Schopflocher, Donald; VanSpronsen, Eric; Spence, John C; Vallianatos, Helen; Raine, Kim D; Plotnikoff, Ronald C; Nykiforuk, Candace I J

2012-07-26

Detailed assessments of the built environment often resist data reduction and summarization. This project sought to develop a method of reducing built environment data to an extent that they can be effectively communicated to researchers and community stakeholders. We aim to help in an understanding of how these data can be used to create neighbourhood groupings based on built environment characteristics and how the process of discussing these neighbourhoods with community stakeholders can result in the development of community-informed health promotion interventions. We used the Irvine Minnesota Inventory (IMI) to assess 296 segments of a semi-rural community in Alberta. Expert raters "created" neighbourhoods by examining the data. Then, a consensus grouping was developed using cluster analysis, and the number of IMI variables to characterize the neighbourhoods was reduced by multiple discriminant function analysis. The 296 segments were reduced to a consensus set of 10 neighbourhoods, which could be separated from each other by 9 functions constructed from 24 IMI variables. Biplots of these functions were an effective means of summarizing and presenting the results of the community assessment, and stimulated community action. It is possible to use principled quantitative methods to reduce large amounts of information about the built environment into meaningful summaries. These summaries, or built environment neighbourhoods, were useful in catalyzing action with community stakeholders and led to the development of health-promoting built environment interventions.

Population Growth and Its Expression in Spatial Built-up Patterns: The Sana’a, Yemen Case Study

Directory of Open Access Journals (Sweden)

Gunter Zeug

2010-04-01

Full Text Available In light of rapid global urbanisation, monitoring and mapping of urban and population growth is of great importance. Population growth in Sana’a was investigated for this reason. The capital of the Republic of Yemen is a rapidly growing middle sized city where the population doubles almost every ten years. Satellite data from four different sensors were used to explore urban growth in Sana’a between 1989 and 2007, assisted by topographic maps and cadastral vector data. The analysis was conducted by delineating the built-up areas from the various optical satellite data, applying a fuzzy-rule-based composition of anisotropic textural measures and interactive thresholding. The resulting datasets were used to analyse urban growth and changes in built-up density per district, qualitatively as well as quantitatively, using a geographic information system. The built-up area increased by 87 % between 1989 and 2007. Built-up density has increased in all areas, but particularly in the northern and southern suburban districts, also reflecting the natural barrier of surrounding mountain ranges. Based on long-term population figures, geometric population growth was assumed. This hypothesis was used together with census data for 1994 and 2004 to estimate population figures for 1989 and 2007, resulting in overall growth of about 240%. By joining population figures to district boundaries, the spatial patterns of population distribution and growth were examined. Further, urban built-up growth and population changes over time were brought into relation in order to investigate changes in population density per built-up area. Population densities increased in all districts, with the greatest density change in the peripheral areas towards the North. The results reflect the pressure on the city’s infrastructure and natural resources and could contribute to sustainable urban planning in the city of Sana’a.

Built-in surface electric field, piezoelectricity and photoelastic effect in GaN nanorods for nanophotonic devices.

Science.gov (United States)

Su, W S; Chen, T T; Cheng, C L; Fu, S P; Chen, Y F; Hsiao, C L; Tu, L W

2008-06-11

Novel behaviors arising from the coupling between the built-in surface electric field, piezoelectricity, electron-hole pairs and external light beam were observed in GaN nanorods. An increase in the optical excitation density resulted in a blueshift in the photoluminescence spectra and a redshift in the frequency of the GaN A(1)(LO) phonon. The underlying mechanism was attributed to the screening of the built-in surface electric field by photoexcited carriers and, through the converse piezoelectric effect, a reduction in the internal strain. The existence of the built-in surface electric field in GaN nanorods was confirmed by scanning Kelvin probe microscopy. Our results firmly establish the existence of the photoelastic effect in GaN nanorods. In addition to underpinning the principle for applications in nanophotonic devices, this discovery also draws attention to the novel effects arising from the inherent large surface-to-volume ratio of nanostructures, which is possibly applicable to many other nanomaterials.

Preservation of Built Environments

DEFF Research Database (Denmark)

Pilegaard, Marie Kirstine

When built environments and recently also cultural environments are to be preserved, the historic and architectural values are identified as the key motivations. In Denmark the SAVE system is used as a tool to identify architectural values, but in recent years it has been criticized for having...... architectural value in preservation work as a matter of maintaining the buildings -as keeping them "alive" and allowing this to continue in the future. The predominantly aesthetic preservation approach will stop the buildings' life process, which is the same as - "letting them die". Finnebyen in Aarhus...... is an example of a residential area, where the planning authority currently has presented a preservational district plan, following guidelines from the SAVE method. The purpose is to protect the area's architectural values in the future. The predominantly aesthetic approach is here used coupled to the concept...

Guidelines on the prevention of built-in moisture

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place; Møller, Eva B.

2014-01-01

As a result of built-in-moisture, a number of buildings in Denmark were attacked by moulds even before the users moved in. Therefore, the Danish Building Regulations have since 2008 stipulated that building structures and materials must not, on moving in, have a moisture content that is liable...... the execution phase and the building’s capacity to withstand moisture. It also specifies how moisture should be dealt with in the general quality assurance system of the building industry. The Danish guideline is compared with similar guidelines and tools in other Nordic countries. The education of moisture...... specialists is emphasised and it is questioned whether a voluntary guideline will have the desired effect....

Sustainable development criteria for Built Environment projects in South Africa (CSIR)

CSIR Research Space (South Africa)

Gibberd, Jeremy T

2010-01-01

Full Text Available This paper is based on work undertaken for the Gauteng Department of Agriculture and Rural Development (GDARD) developing a set of sustainable development criteria for built environment projects requiring environmental impact assessments. (Gibberd...

Laparoscopic totally extraperitoneal inguinal hernia repair: lessons learned from 3,100 hernia repairs over 15 years.

Science.gov (United States)

Dulucq, Jean-Louis; Wintringer, Pascal; Mahajna, Ahmad

2009-03-01

Two revolutions in inguinal hernia repair surgery have occurred during the last two decades. The first was the introduction of tension-free hernia repair by Liechtenstein in 1989 and the second was the application of laparoscopic surgery to the treatment of inguinal hernia in the early 1990s. The purposes of this study were to assess the safety and effectiveness of laparoscopic totally extraperitoneal (TEP) repair and to discuss the technical changes that we faced on the basis of our accumulative experience. Patients who underwent an elective inguinal hernia repair at the Department of Abdominal Surgery at the Institute of Laparoscopic Surgery (ILS), Bordeaux, between June 1990 and May 2005 were enrolled retrospectively in this study. Patient demographic data, operative and postoperative course, and outpatient follow-up were studied. A total of 3,100 hernia repairs were included in the study. The majority of the hernias were repaired by TEP technique; the repair was done by transabdominal preperitoneal (TAPP) repair in only 3%. Eleven percent of the hernias were recurrences after conventional repair. Mean operative time was 17 min in unilateral hernia and 24 min in bilateral hernia. There were 36 hernias (1.2%) that required conversion: 12 hernias were converted to open anterior Liechtenstein and 24 to laparoscopic TAPP technique. The incidence of intraoperative complications was low. Most of the patients were discharged at the second day of the surgery. The overall postoperative morbidity rate was 2.2%. The incidence of recurrence rate was 0.35%. The recurrence rate for the first 200 repairs was 2.5%, but it decreased to 0.47% for the subsequent 1,254 hernia repairs According to our experience, in the hands of experienced laparoscopic surgeons, laparoscopic hernia repair seems to be the favored approach for most types of inguinal hernias. TEP is preferred over TAPP as the peritoneum is not violated and there are fewer intra-abdominal complications.

Physics, technologies, and status of the Wendelstein 7-X device

International Nuclear Information System (INIS)

Wagner, F.; Andreeva, T.; Baldzuhn, J.

2005-01-01

W7-X is a fully optimised low-shear stellarator of the Wendelstein line. It follows the partially optimised W7-AS device which showed excellent operational characteristics at fusion relevant parameters. W7-X is optimised along the quasi-isodynamic principle. It is built with superconducting coils and ECRF heating and plasma exhaust are developed for 30 min operation. At present, the device is at the transition from component procurement to assembly. W7-X has a high ITER relevance and it represents an excellent training bed for European industry. (author)

Preparation of epoxy-functionalized methyl methacrylate-butadiene-styrene core-shell particles and investigation of their dispersion in polyamide-6

NARCIS (Netherlands)

Aerdts, A.M.; Groeninckx, G.; Zirkzee, H.F.; Aert, van H.A.M.; Geurts, J.M.

1997-01-01

Functional core—shell impact modifiers of glycidyl methacrylate (GMA) functionalized methyl methacrylate—butadiene—styrene (MBS) have been prepared via a seeded semi-continuous emulsion polymerization. These functional MBS—GMA particles were blended with polyamide-6. Investigations by transmission

The advancement of the built environment research through employment of structural equation modeling (SEM)

Science.gov (United States)

Wasilah, S.; Fahmyddin, T.

2018-03-01

The employment of structural equation modeling (SEM) in research has taken an increasing attention in among researchers in built environment. There is a gap to understand the attributes, application, and importance of this approach in data analysis in built environment study. This paper intends to provide fundamental comprehension of SEM method in data analysis, unveiling attributes, employment and significance and bestow cases to assess associations amongst variables and constructs. The study uses some main literature to grasp the essence of SEM regarding with built environment research. The better acknowledgment of this analytical tool may assist the researcher in the built environment to analyze data under complex research questions and to test multivariate models in a single study.

Ethics, Design and Planning of the Built Environment

NARCIS (Netherlands)

Basta, C.; Moroni, S.

2013-01-01

The book proposes a set of original contributions in research areas shared by planning theory, architectural research, design and ethical inquiry. The contributors gathered in 2010 at the Ethics of the Built Environment seminar organized by the editors at Delft University of Technology. Both

78 FR 54156 - Limitations on Duplication of Net Built-in Losses

Science.gov (United States)

2013-09-03

... it is not a transfer of net built-in loss property under section 362(e)(1); that gain recognized by... transferor distributes the stock received in the transaction and, in the distribution, no gain or loss was... the transaction. 3. Securities Received Without the Recognition of Gain or Loss Section 362(e)(2) is...

γ-Glutamylmethylamide Is an Essential Intermediate in the Metabolism of Methylamine by Methylocella silvestris▿

Science.gov (United States)

Chen, Yin; Scanlan, Julie; Song, Lijiang; Crombie, Andrew; Rahman, M. Tanvir; Schäfer, Hendrik; Murrell, J. Colin

2010-01-01

Methylocella silvestris BL2, a facultative methane utilizer, can grow on monomethylamine (MMA) as a sole carbon and nitrogen source. No activity of MMA dehydrogenase was detectable. Instead, this bacterium utilizes a methylated amino acid pathway (γ-glutamylmethylamide [GMA] and N-methylglutamate [NMG]) for MMA metabolism. The activities of the two key enzymes in this pathway, GMA synthetase and NMG dehydrogenase, were found when the bacterium was grown on MMA. GMA was detected by high-performance liquid chromatography-mass spectrometry only when the bacterium was grown on MMA but not when it was grown on methanol. Proteomic analysis of soluble and membrane fractions of the proteome from MMA- and methanol-grown cultures revealed that an eight-gene cluster (Msil2632 to Msil2639) was induced by MMA and cotranscribed as an operon, as shown by reverse transcription-PCR. GMA-dissimilating enzyme activity was also detected when it was grown on MMA. Formaldehyde and ammonium production from GMA was dependent on glutamate but not on α-ketoglutarate. Marker exchange mutagenesis of a putative GMAS gene homologue (gmas, Msil2635) within this eight-gene cluster, with a kanamycin gene cassette, abolished growth of M. silvestris on MMA as either a sole carbon or a sole nitrogen source. Overall, our results suggest that gmas is essential in MMA metabolism by M. silvestris. PMID:20472738

{gamma}-Glutamylmethylamide is an essential intermediate in the metabolism of methylamine by Methylocella silvestris.

Science.gov (United States)

Chen, Yin; Scanlan, Julie; Song, Lijiang; Crombie, Andrew; Rahman, M Tanvir; Schäfer, Hendrik; Murrell, J Colin

2010-07-01

Methylocella silvestris BL2, a facultative methane utilizer, can grow on monomethylamine (MMA) as a sole carbon and nitrogen source. No activity of MMA dehydrogenase was detectable. Instead, this bacterium utilizes a methylated amino acid pathway (gamma-glutamylmethylamide [GMA] and N-methylglutamate [NMG]) for MMA metabolism. The activities of the two key enzymes in this pathway, GMA synthetase and NMG dehydrogenase, were found when the bacterium was grown on MMA. GMA was detected by high-performance liquid chromatography-mass spectrometry only when the bacterium was grown on MMA but not when it was grown on methanol. Proteomic analysis of soluble and membrane fractions of the proteome from MMA- and methanol-grown cultures revealed that an eight-gene cluster (Msil2632 to Msil2639) was induced by MMA and cotranscribed as an operon, as shown by reverse transcription-PCR. GMA-dissimilating enzyme activity was also detected when it was grown on MMA. Formaldehyde and ammonium production from GMA was dependent on glutamate but not on alpha-ketoglutarate. Marker exchange mutagenesis of a putative GMAS gene homologue (gmas, Msil2635) within this eight-gene cluster, with a kanamycin gene cassette, abolished growth of M. silvestris on MMA as either a sole carbon or a sole nitrogen source. Overall, our results suggest that gmas is essential in MMA metabolism by M. silvestris.

Performance of low-cost X-ray area detectors with consumer digital cameras

International Nuclear Information System (INIS)

Panna, A.; Gomella, A.A.; Harmon, K.J.; Chen, P.; Miao, H.; Bennett, E.E.; Wen, H.

2015-01-01

We constructed X-ray detectors using consumer-grade digital cameras coupled to commercial X-ray phosphors. Several detector configurations were tested against the Varian PaxScan 3024M (Varian 3024M) digital flat panel detector. These include consumer cameras (Nikon D800, Nikon D700, and Nikon D3X) coupled to a green emission phosphor in a back-lit, normal incidence geometry, and in a front-lit, oblique incidence geometry. We used the photon transfer method to evaluate detector sensitivity and dark noise, and the edge test method to evaluate their spatial resolution. The essential specifications provided by our evaluation include discrete charge events captured per mm 2 per unit exposure surface dose, dark noise in equivalents of charge events per pixel, and spatial resolution in terms of the full width at half maximum (FWHM) of the detector's line spread function (LSF). Measurements were performed using a tungsten anode X-ray tube at 50 kVp. The results show that the home-built detectors provide better sensitivity and lower noise than the commercial flat panel detector, and some have better spatial resolution. The trade-off is substantially smaller imaging areas. Given their much lower costs, these home-built detectors are attractive options for prototype development of low-dose imaging applications

Intelligent Buildings: Key to Achieving Total Sustainability in the Built Environment

Directory of Open Access Journals (Sweden)

Tulika Gadakari

2014-01-01

Full Text Available ‘Are intelligent buildings a pragmatic approach towards achieving a sustainable built environment?’ is the research question that this review article aims to answer. It has been argued that there is a serious need for intelligent buildings to be evaluated against the parameters of total sustainability (environmental, economic and social so as to help the agenda of living in a technologically advanced, healthy and comfortable world. This paper reviews existing theoretical concepts of intelligence and sustainability in the built environment, through an exploration of various scientific literature and U.S Green Building Council’s LEED (Leadership in Energy and Environmental Design databases. A systematic qualitative review approach has been employed to select an appropriate definition of sustainable development and use it as a theoretical framework to assess the technological impact of intelligent buildings on the environmental, economic and social front. Subsequently five case study buildings from around the world, which exemplify the use of intelligent technologies to achieve sustainable gains were chosen and analyzed to further validate the literature findings. Outputs from the study highlight the various benefits of intelligent buildings, which include decrease in energy and water consumption, operational costs, as well as increase in productivity and investments. Additionally the analysis of the case studies revealed that the use of intelligent building technologies has contributed significantly towards a higher sustainability rating on the LEED rating scale. Moreover, the comparison of the attributes of intelligent buildings and sustainable practices in buildings, illustrates the fact that there is a considerable overlap between the two and intelligence can aid sustainability in the built environment. Thus the research suggests that green technologies and intelligence in combination may be a pragmatic approach towards the sustainability

Hydrodynamic Behavior of Overtopping Wave Energy Converters Built in Sea Defense Structures

DEFF Research Database (Denmark)

Victor, Lander; Kofoed, Jens Peter; Troch, Peter

2010-01-01

Many sea defense structures need to be adapted to the rising sea water level and changing wave climate due to global warming. The accordingly required investment opens perspectives for wave energy converters (WECs) – that are built as part of the sea defense structures – to become economically...... viable. In this paper the average overtopping discharges q of overtopping wave energy devices built in sea defense structures are studied. Physical model tests with this type of devices have been carried out in a wave flume leading to experimental q - values. The experimental q -values are compared...... with predicted average overtopping discharges by existing empirical formulae from literature. Overtopping converters have low relative crest freeboards and smooth slope characteristics to maximize overtopping, which is contradictive to the basic role of sea defense structures. As a consequence, the achieved...

Business Ecosystem Definition in Built Environment Using a Stakeholder Assessment Process

Directory of Open Access Journals (Sweden)

Tuomas Lappi

2015-06-01

Full Text Available Actors and their relationships are core elements of the business ecosystem concept, a trending model of business collaboration emphasizing organizational diversity, relationship dependency and joint evolution. This study approaches a built environment business ecosystem to structure the acknowledged complexity of ecosystem definition by applying a three-step stakeholder assessment process. The process is based on a stakeholder network diagram, Mitchell, Agle, and Wood’s (1997 well-recognized stakeholder salience model and a two-dimensional stakeholder matrix. The assessment process is applied to a school campus case study to define a built environment business ecosystem and the salience of the ecosystem actors. Results, including salience score calculation, validate the applicability of the proposed process. The findings provide novel insights for ecosystem researchers into how stakeholder theory concepts can be applied to broaden the understanding of business ecosystem dynamics.

The X-625 Groundwater Treatment Facility: A field-scale test of trichloroethylene dechlorination using iron filings for the X-120/X-749 groundwater plume

International Nuclear Information System (INIS)

Liang, L.; West, O.R.; Korte, N.E.

1997-09-01

The dehalogenation of chlorinated solvents by zero-valence iron has recently become the subject of intensive research and development as a potentially cost-effective, passive treatment for contaminated groundwater through reactive barriers. Because of its successful application in the laboratory and other field sites, the X-625 Groundwater Treatment Facility (GTF) was constructed to evaluate reactive barrier technology for remediating trichloroethylene (TCE)-contaminated groundwater at the Portsmouth Gaseous Diffusion Plant (PORTS). The X-625 GTF was built to fulfill the following technical objectives: (1) to test reactive barrier materials (e.g., iron filings) under realistic groundwater conditions for long term applications, (2) to obtain rates at which TCE degrades and to determine by-products for the reactive barrier materials tested, and (3) to clean up the TCE-contaminated water in the X-120 plume. The X-625 is providing important field-scale and long-term for the evaluation and design of reactive barriers at PORTS. The X-625 GTS is a unique facility not only because it is where site remediation is being performed, but it is also where research scientists and process engineers can test other promising reactive barrier materials. In addition, the data collected from X-625 GTF can be used to evaluate the technical and economic feasibility of replacing the activated carbon units in the pump-and-treat facilities at PORTS

The effects of built environment attributes on physical activity-related health and health care costs outcomes in Australia.

Science.gov (United States)

Zapata-Diomedi, Belen; Herrera, Ana Maria Mantilla; Veerman, J Lennert

2016-11-01

Attributes of the built environment can positively influence physical activity of urban populations, which results in health and economic benefits. In this study, we derived scenarios from the literature for the association built environment-physical activity and used a mathematical model to translate improvements in physical activity to health-adjusted life years and health care costs. We modelled 28 scenarios representing a diverse range of built environment attributes including density, diversity of land use, availability of destinations, distance to transit, design and neighbourhood walkability. Our results indicated potential health gains in 24 of the 28 modelled built environment attributes. Health care cost savings due to prevented physical activity-related diseases ranged between A$1300 to A$105,355 per 100,000 adults per year. On the other hand, additional health care costs of prolonged life years attributable to improvements in physical activity were nearly 50% higher than the estimated health care costs savings. Our results give an indication of the potential health benefits of investing in physical activity-friendly built environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Photovoltaic X-ray detectors based on epitaxial GaAs structures

Energy Technology Data Exchange (ETDEWEB)

Achmadullin, R.A. [Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 1 Ac. Vvedenski square, Fryazino 141190, Moscow region (Russian Federation); Artemov, V.V. [Shubnikov Institute of Crystallography, Russian Academy of Sciences, 59 Leninski pr., Moscow B-333, 117333 (Russian Federation); Dvoryankin, V.F. [Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 1 Ac. Vvedenski square, Fryazino 141190, Moscow region (Russian Federation)]. E-mail: vfd217@ire216.msk.su; Dvoryankina, G.G. [Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 1 Ac. Vvedenski square, Fryazino 141190, Moscow region (Russian Federation); Dikaev, Yu.M. [Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 1 Ac. Vvedenski square, Fryazino 141190, Moscow region (Russian Federation); Ermakov, M.G. [Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 1 Ac. Vvedenski square, Fryazino 141190, Moscow region (Russian Federation); Ermakova, O.N. [Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 1 Ac. Vvedenski square, Fryazino 141190, Moscow region (Russian Federation); Chmil, V.B. [Scientific State Center, High Energy Physics Institute, Protvino, Moscow region (Russian Federation); Holodenko, A.G. [Scientific State Center, High Energy Physics Institute, Protvino, Moscow region (Russian Federation); Kudryashov, A.A.; Krikunov, A.I.; Petrov, A.G.; Telegin, A.A. [Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 1 Ac. Vvedenski square, Fryazino 141190, Moscow region (Russian Federation); Vorobiev, A.P. [Scientific State Center, High Energy Physics Institute, Protvino, Moscow region (Russian Federation)

2005-12-01

A new type of the photovoltaic X-ray detector based on epitaxial p{sup +}-n-n'-n{sup +} GaAs structures which provides a high efficiency of charge collection in the non-bias operation mode at room temperature is proposed. The GaAs epitaxial structures were grown by vapor-phase epitaxy on heavily doped n{sup +}-GaAs(1 0 0) substrates. The absorption efficiency of GaAs X-ray detector is discussed. I-V and C-V characteristics of the photovoltaic X-ray detectors are analyzed. The built-in electric field profiles in the depletion region of epitaxial structures are measured by the EBIC method. Charge collection efficiency to {alpha}-particles and {gamma}-radiation are measured. The application of X-ray detectors is discussed.

The concordance of directly and indirectly measured built environment attributes and physical activity adoption

Directory of Open Access Journals (Sweden)

O'Connor Daniel P

2011-07-01

Full Text Available Background Physical activity (PA adoption is essential for obesity prevention and control, yet ethnic minority women report lower levels of PA and are at higher risk for obesity and its comorbidities compared to Caucasians. Epidemiological studies and ecologic models of health behavior suggest that built environmental factors are associated with health behaviors like PA, but few studies have examined the association between built environment attribute concordance and PA, and no known studies have examined attribute concordance and PA adoption. Purpose The purpose of this study was to associate the degree of concordance between directly and indirectly measured built environment attributes with changes in PA over time among African American and Hispanic Latina women participating in a PA intervention. Method Women (N = 410 completed measures of PA at Time 1 (T1 and Time 2 (T2; environmental data collected at T1 were used to compute concordance between directly and indirectly measured built environment attributes. The association between changes in PA and the degree of concordance between each directly and indirectly measured environmental attribute was assessed using repeated measures analyses. Results There were no significant associations between built environment attribute concordance values and change in self-reported or objectively measured PA. Self-reported PA significantly increased over time (F(1,184 = 7.82, p = .006, but this increase did not vary by ethnicity or any built environment attribute concordance variable. Conclusions Built environment attribute concordance may not be associated with PA changes over time among minority women. In an effort to promote PA, investigators should clarify specific built environment attributes that are important for PA adoption and whether accurate perceptions of these attributes are necessary, particularly among the vulnerable population of minority women.

Production of X(4160), Y(3940) and Z(3930) in the B¯0 --> K¯*0X(YZ) and B¯s0 --> phiX(YZ) decays

Energy Technology Data Exchange (ETDEWEB)

Liang, Wei-Hong [Guangxi Normal Universitym Guilin, China; Molina, Rachel [George Washington Univ., Washington, DC (United States); Xie, Ju-Jun [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, China; Doring, Michael [George Washington Univ., Washington, DC (United States); Oset, Eugenio [Centro Mixto Universidad de Valencia-CSIC, Institutos de Investigacio´ n de Paterna, Apartado 22085, 46071 Valencia, Spain

2016-06-01

We have investigated the decays of and with R being the X(4160), Y(3940), Z(3930) and a predicted J = 1 resonances. By using a model in which these states are dynamically generated from the vector-vector interaction, most notably the and states, we predicted five ratios for the production of these states. Some ratios show that the resonance is built from c with or without extra hadronization. In order to offer some extra test for the molecular composition of these states, we have evaluated the invariant mass distributions for the and close to threshold and made predictions for these magnitudes relative to the width for the production of the resonances.

Inhalation of gas metal arc-stainless steel welding fume promotes lung tumorigenesis in A/J mice.

Science.gov (United States)

Falcone, Lauryn M; Erdely, Aaron; Meighan, Terence G; Battelli, Lori A; Salmen, Rebecca; McKinney, Walter; Stone, Samuel; Cumpston, Amy; Cumpston, Jared; Andrews, Ronnee N; Kashon, Michael; Antonini, James M; Zeidler-Erdely, Patti C

2017-08-01

Epidemiologic studies suggest an increased risk of lung cancer with exposure to welding fumes, but controlled animal studies are needed to support this association. Oropharyngeal aspiration of collected "aged" gas metal arc-stainless steel (GMA-SS) welding fume has been shown by our laboratory to promote lung tumor formation in vivo using a two-stage initiation-promotion model. Our objective in this study was to determine whether inhalation of freshly generated GMA-SS welding fume also acts as a lung tumor promoter in lung tumor-susceptible mice. Male A/J mice received intraperitoneal (IP) injections of corn oil or the chemical initiator 3-methylcholanthrene (MCA; 10 µg/g) and 1 week later were exposed by whole-body inhalation to air or GMA-SS welding aerosols for 4 h/d × 4 d/w × 9 w at a target concentration of 40 mg/m 3 . Lung nodules were enumerated at 30 weeks post-initiation. GMA-SS fume significantly promoted lung tumor multiplicity in A/J mice initiated with MCA (16.11 ± 1.18) compared to MCA/air-exposed mice (7.93 ± 0.82). Histopathological analysis found that the increased number of lung nodules in the MCA/GMA-SS group were hyperplasias and adenomas, which was consistent with developing lung tumorigenesis. Metal deposition analysis in the lung revealed a lower deposited dose, approximately fivefold compared to our previous aspiration study, still elicited a significant lung tumorigenic response. In conclusion, this study demonstrates that inhaling GMA-SS welding fume promotes lung tumorigenesis in vivo which is consistent with the epidemiologic studies that show welders may be at an increased risk for lung cancer.

Artist Concept of X-43A/Hyper-X Hypersonic Experimental Research Vehicle in Flight

Science.gov (United States)

1998-01-01

An artist's conception of the X-43A Hypersonic Experimental Vehicle, or 'Hyper-X' in flight. The X-43A was developed to flight test a dual-mode ramjet/scramjet propulsion system at speeds from Mach 7 up to Mach 10 (7 to 10 times the speed of sound, which varies with temperature and altitude). Hyper-X, the flight vehicle for which is designated as X-43A, is an experimental flight-research program seeking to demonstrate airframe-integrated, 'air-breathing' engine technologies that promise to increase payload capacity for future vehicles, including hypersonic aircraft (faster than Mach 5) and reusable space launchers. This multiyear program is currently underway at NASA Dryden Flight Research Center, Edwards, California. The Hyper-X schedule calls for its first flight later this year (2000). Hyper-X is a joint program, with Dryden sharing responsibility with NASA's Langley Research Center, Hampton, Virginia. Dryden's primary role is to fly three unpiloted X-43A research vehicles to validate engine technologies and hypersonic design tools as well as the hypersonic test facility at Langley. Langley manages the program and leads the technology development effort. The Hyper-X Program seeks to significantly expand the speed boundaries of air-breathing propulsion by being the first aircraft to demonstrate an airframe-integrated, scramjet-powered free flight. Scramjets (supersonic-combustion ramjets) are ramjet engines in which the airflow through the whole engine remains supersonic. Scramjet technology is challenging because only limited testing can be performed in ground facilities. Long duration, full-scale testing requires flight research. Scramjet engines are air-breathing, capturing their oxygen from the atmosphere. Current spacecraft, such as the Space Shuttle, are rocket powered, so they must carry both fuel and oxygen for propulsion. Scramjet technology-based vehicles need to carry only fuel. By eliminating the need to carry oxygen, future hypersonic vehicles will

A built-in current sensor using thin-film transistors

Energy Technology Data Exchange (ETDEWEB)

Hatzopoulos, A A [Department of Electrical and Computer Eng., Electronics Lab., Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Siskos, S [Department of Physics, Electronics Lab., Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Dimitriadis, C A [Department of Physics, Microelectronic device characterization and design Lab., Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Papadopoulos, N [Department of Electrical and Computer Eng., Electronics Lab., Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Pappas, I [Department of Physics, Electronics Lab., Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Nalpantidis, L [Department of Physics, Electronics Lab., Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece)

2005-01-01

A simple current mirror using TFTs with input terminals which are capacitively coupled to the TFT gate, is used in this work, to design a built-in current sensor (BICS). The important feature in this application is that the voltage drop across the sensing TFT device can be reduced to almost zero value, while preserving transistor operation in the saturation region. This makes the proposed BICS appropriate for TFT applications without affecting the circuit operation. It also results in adequate linearity for the current monitoring, making the structure applicable to digital as well as to analog and mixed-signal circuit testing.

The DARPA compact Superconducting X-Ray Lithography Source features

International Nuclear Information System (INIS)

Heese, R.; Kalsi, S.; Leung, E.

1991-01-01

Under DARPA sponsorship, a compact Superconducting X-Ray Lithography Source (SXLS) is being designed and built by the Brookhaven National Laboratory (BNL) with industry participation from Grumman Corporation and General Dynamics. This source is optimized for lithography work for sub-micron high density computer chips, and is about the size of a billiard table (1.5 m x 4.0 m). The machine has a racetrack configuration with two 180 degree bending magnets being designed and built by General Dynamics under a subcontract with Grumman Corporation. The machine will have 18 photon ports which would deliver light peaked at a wave length of 10 Angstroms. Grumman is commercializing the SXLS device and plans to book orders for delivery of industrialized SXLS (ISXLS) versions in 1995. This paper will describe the major features of this device. The commercial machine will be equipped with a fully automated user-friendly control systems, major features of which are already working on a compact warm dipole ring at BNL. This ring has normal dipole magnets with dimensions identical to the SXLS device, and has been successfully commissioned

What is the relationship between built form and energy use in dwellings?

International Nuclear Information System (INIS)

Wright, Andrew

2008-01-01

Energy is used in dwellings to provide four services: space heating, hot water, lighting and to power appliances. This paper describes how the usage of energy in a UK home results from a complex interaction between built form, location, energy-using equipment, occupants and the affordability of fuel. Current models with standard occupancy predict that energy use will be strongly related to size and built form, but surveys of real homes show only weak correlations, across all types of dwelling. Recent research has given us insights into occupancy factors including preferred comfort, 'take-back' from thermal efficiency improvements, and patterns of electricity use. Space heating is on a downward trend and is low in new dwellings. Energy use for lights and appliances, which is only weakly related to built form, is increasing. Strong legislation, combined with low-carbon technologies, will be needed to counteract this trend. Future challenges discussed include increases in real energy prices and climate change mitigation efforts, which are likely to improve the existing stock. Challenging targets are now in place for new housing to move towards low or zero energy and carbon standards. In the longer term, dwellings will demand less energy. Alternatives to gas for space heating will be increasingly common, including ground source heat and local combined heat and power (CHP) from biomass, while electricity could come from a more decarbonised electricity system. However, these improvements must be set alongside a demand for many new homes, demographic trends towards smaller households, and a more holistic approach to overall carbon use including personal transport

Search for the X(4140) state in B+->J/psi phi K.sup.+./sup. decays with the D0 detector

Czech Academy of Sciences Publication Activity Database

Abazov, V. M.; Abbott, B.; Acharya, B.S.; Kupčo, Alexander; Lokajíček, Miloš

2014-01-01

Roč. 89, č. 1 (2014), "012004-1"-"012004-8" ISSN 1550-7998 R&D Projects: GA MŠk(CZ) LG12006 Institutional support: RVO:68378271 Keywords : D0 * B decay * J/psi(3100) * Batavia TEVATRON Coll * branching ratio * enhancement * statistical Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 4.643, year: 2014

The Simbol-X Anticoincidence

International Nuclear Information System (INIS)

Chabaud, J.; Colonges, S.; Barbay, J.; Baronick, J. P.; Benallou, M.; Gilliot, M.; Jaeger, J. J.; Nicolas, M.; Ollivier, E.; Waisbard, J.; Yoffo, B.; Laurent, P.; Ferrando, P.

2009-01-01

The Simbol-X telescope will be constitued by two satellites in formation flight. One will host the mirror module and the other the detector payload. This payload will be built with two main detectors able to measure the position, energy and arrival time of each focused photon, between 0.5 and 80 keV. The high sensitivity required by Simbol-X will necessitate low noise background detectors. To achieve this goal, those detectors will be surrounded by a passive graded shield, aimed to stop the out of field of view photons, and an active anticoiencidence system to tag the passing particles. This anticoiencidence detector, whose conception, optimisation and realization are under responsibility of the APC Laboratory, Paris, is based on plastic scintillator plates associated to multi-anodes photo-multipliers via optical fibers. In this paper, we will present the present status of the anticoiencidence system and its expected performances.

The association between built environment features and physical activity in the Australian context: a synthesis of the literature

Directory of Open Access Journals (Sweden)

Belen Zapata-Diomedi

2016-06-01

Full Text Available Abstract Background There is growing evidence indicating that the built environment is a determinant of physical activity. However, despite the well-established health benefits of physical activity this is rarely considered in urban planning. We summarised recent Australian evidence for the association built environment-physical activity among adults. This summary aims to inform policy makers who advocate for the consideration of health in urban planning. Methods A combination of built environment and physical activity terms were used to systematically identify relevant peer reviewed and grey literature. Results A total of 23 studies were included, providing 139 tests of associations between specific built environment features and physical activity. Of the total, 84 relationships using objective measures of built environment attributes were evaluated, whereas 55 relationships using self-reported measures were evaluated. Our results indicate that walkable neighbourhoods with a wide range of local destinations to go to, as well as a diverse use of land, encourage physical activity among their residents. Conclusions This research provides a summary of recent Australian evidence on built environments that are most favourable for physical activity. Features of walkability and availability of destinations within walking distance should be accounted for in the development or redevelopment of urban areas. Our findings emphasise the importance of urban planning for health via its impact on population levels of physical activity.

Associations of built environment and children's physical activity: a narrative review.

Science.gov (United States)

Masoumi, Houshmand E

2017-12-20

Childhood obesity has been an epidemic particularly in high-income countries. There is a considerable volume of data and studies depicting the rising number of obese children and adolescents in different countries. As suggested by the literature, physical inactivity is one the main drivers of childhood obesity. This paper addresses the associations of the built environment with physical activity of children in order to find to theoretically facilitate intervention and prevention measures. Literature: There is a large body of literature describing the overall determinants of children's physical activity. The built environment is one of the influential factors that have been partially examined. Among the physical environment indicators, distance to school has been repeatedly reported to be negatively associated with active travels to school; thus, it indirectly affects physical activity of children. Apart from distance to school, some other built environment indicators have also been less researched, such as population and construction densities, distance to the city center, land use mix, and type of urban fabric (urban, suburban, etc.). The purpose of this review was to shed light on some of the less-studied areas of the existing literature related to the relationship between the built environment and physical activity of children aged between 3 and 12 years. The English-language publications, majority of which were peer-reviewed journal papers published in recent years, were collected and descriptively analyzed. Two large categories were the backbone of this narrative review: (1) non-school outdoor activities of children that take place in the residential neighborhood and (2) commuting to school and the related interventions such as safe routes to school. Seven areas were synthesized by this review of the literature. Differences in associations of the built environment and physical activity in (1) different types of urban forms and land uses such as urban, suburban

Indigenously built resonance ionization mass spectrometer

International Nuclear Information System (INIS)

Razvi, M.A.N.; Jayasekharan, T.; Thankarajan, K.; Guhagarkar, M.B.; Dixit, M.N.; Bhale, G.L.

2000-04-01

Design, fabrication and performance testing of an indigenously built Resonance Ionization Mass Spectrometer (RIMS) is presented in this report. The instrument is totally indigenous, but for the laser components consisting of the excimer laser and tunable dye lasers. Constructional details of atomic beam source and linear time-of-flight mass spectrometer are included. Finally, commissioning and performance testing of the instrument is described. Mass resolving power of 400 and a detection limit of 100 atoms has been achieved using this RIMS set-up. (author)

Optimization of process parameter for graft copolymerization of glycidyl methacrylate onto delignified banana fibers

International Nuclear Information System (INIS)

Selambakkannu, S.; Nor Azillah Fatimah Othman; Siti Fatahiyah Mohamad

2016-01-01

This paper focused on pre-treated banana fibers as a trunk polymer for optimization of radiation-induced graft copolymerization process parameters. Pre-treated banana fiber was grafted with glycidyl methacrylate (GMA) via electron beam irradiation. Optimization of grafting parameters in term of grafting yield was analyzed at numerous radiation dose, monomer concentration and reaction time. Grafting yield had been calculated gravimetrically against all the process parameters. The grafting yield at 40 kGy had increases from 14 % to 22.5 % at 1 h and 24 h of reaction time respectively. Grafting yield at 1 % of GMA was about 58 % and it increases to 187 % at 3 % GMA. The grafting of GMA onto pre-treated banana fibers confirmed with the characterization using FTIR, SEM and TGA. Grafting of GMA onto pre-treated fibers was successfully carried out and it was confirmed by the results obtained via the characterization. (author)

Synthesis and characterization of new functionalized polymer-Fe3O4 nanocomposite particles

Directory of Open Access Journals (Sweden)

A. Bukowska

2017-01-01

Full Text Available In this study, Fe3O4 nanoparticles (NPs were functionalized with copolymer or terpolymer bearing glycidyl methacrylate (GMA moieties making them suitable for potential applications as drug delivery systems (DDS. For this purpose, the surface of magnetic nanoparticles was first coated with 3-(trimethoxysilyl propyl methacrylate (MPS by a silanization reaction to introduce reactive methacrylate groups onto the surface. Subsequently, monomers were grafted onto the surface of modified-MPS particles via two polymerization methods: seed emulsion (GMA, divinylbenzene, DVB, and styrene, S and distillation – precipitation (GMA and DVB. The obtained nanocomposite particles were characterized by FTIR (Fourier transform infrared spectroscopy, DR UV-Vis (diffuse reflectance ultraviolet – visible spectroscopy, TEM (transmission electron microscopy combined with EDS (energy dispersive X-ray spectroscopy analysis and DLS (dynamic light scattering. FTIR spectroscopy showed that indeed a polymer – Fe3O4@MPS composite was obtained. TEM and EDS analysis showed that the seed emulsion method resulted in nanosized, 100 nm Fe3O4@MPS core/polymer shell NPs, forming long chains. On the contrary, the distillation – precipitation method caused the formation of an inverted structure, i.e. polymer core coated by a Fe3O4@MPS shell, which exhibited a very coarse size distribution varying from several hundreds to over 2 µm.

Comparative Profiling of microRNA Expression in Soybean Seeds from Genetically Modified Plants and their Near-Isogenic Parental Lines

Science.gov (United States)

Wang, Yong; Lan, Qingkuo; Zhao, Xin; Xu, Wentao; Li, Feiwu; Wang, Qinying; Chen, Rui

2016-01-01

MicroRNAs (miRNAs) have been widely demonstrated to play fundamental roles in gene regulation in most eukaryotes. To date, there has been no study describing the miRNA composition in genetically modified organisms (GMOs). In this study, small RNAs from dry seeds of two GM soybean lines and their parental cultivars were investigated using deep sequencing technology and bioinformatic approaches. As a result, several differentially expressed gma-miRNAs were found between the GM and non-GM soybeans. Meanwhile, more differentially expressed gma-miRNAs were identified between distantly relatednon-GM soybeans, indicating that the miRNA components of soybean seeds varied among different soybean lines, including the GM and non-GM soybeans, and the extent of difference might be related to their genetic relationship. Additionally, fourteen novel gma-miRNA candidates were predicted in soybean seeds including a potential bidirectionally transcribed miRNA family with two genomic loci (gma-miR-N1). Our findings firstly provided useful data for miRNA composition in edible GM crops and also provided valuable information for soybean miRNA research. PMID:27214227

Comparative Profiling of microRNA Expression in Soybean Seeds from Genetically Modified Plants and their Near-Isogenic Parental Lines.

Directory of Open Access Journals (Sweden)

Yong Wang

Full Text Available MicroRNAs (miRNAs have been widely demonstrated to play fundamental roles in gene regulation in most eukaryotes. To date, there has been no study describing the miRNA composition in genetically modified organisms (GMOs. In this study, small RNAs from dry seeds of two GM soybean lines and their parental cultivars were investigated using deep sequencing technology and bioinformatic approaches. As a result, several differentially expressed gma-miRNAs were found between the GM and non-GM soybeans. Meanwhile, more differentially expressed gma-miRNAs were identified between distantly relatednon-GM soybeans, indicating that the miRNA components of soybean seeds varied among different soybean lines, including the GM and non-GM soybeans, and the extent of difference might be related to their genetic relationship. Additionally, fourteen novel gma-miRNA candidates were predicted in soybean seeds including a potential bidirectionally transcribed miRNA family with two genomic loci (gma-miR-N1. Our findings firstly provided useful data for miRNA composition in edible GM crops and also provided valuable information for soybean miRNA research.

Comparative Profiling of microRNA Expression in Soybean Seeds from Genetically Modified Plants and their Near-Isogenic Parental Lines.

Science.gov (United States)

Wang, Yong; Lan, Qingkuo; Zhao, Xin; Xu, Wentao; Li, Feiwu; Wang, Qinying; Chen, Rui

2016-01-01

MicroRNAs (miRNAs) have been widely demonstrated to play fundamental roles in gene regulation in most eukaryotes. To date, there has been no study describing the miRNA composition in genetically modified organisms (GMOs). In this study, small RNAs from dry seeds of two GM soybean lines and their parental cultivars were investigated using deep sequencing technology and bioinformatic approaches. As a result, several differentially expressed gma-miRNAs were found between the GM and non-GM soybeans. Meanwhile, more differentially expressed gma-miRNAs were identified between distantly relatednon-GM soybeans, indicating that the miRNA components of soybean seeds varied among different soybean lines, including the GM and non-GM soybeans, and the extent of difference might be related to their genetic relationship. Additionally, fourteen novel gma-miRNA candidates were predicted in soybean seeds including a potential bidirectionally transcribed miRNA family with two genomic loci (gma-miR-N1). Our findings firstly provided useful data for miRNA composition in edible GM crops and also provided valuable information for soybean miRNA research.

Gender differences in the relationship between built environment and non-communicable diseases: A systematic review.

Science.gov (United States)

Valson, Joanna Sara; Kutty, V Raman

2018-02-05

Non-communicable diseases are on the rise globally. Risk factors of non-communicable diseases continue to be a growing concern in both developed and developing countries. With significant rise in population and establishment of buildings, rapid changes have taken place in the built environment. Relationship between health and place, particularly with non-communicable diseases has been established in previous literature. This systematic review assesses the current evidence on influence of gender in the relationship between built environment and non-communicable diseases. A systematic literature search using PubMed was done to identify all studies that reported relationship between gender and built environment. All titles and abstracts were scrutinised to include only articles based on risk factors, prevention, treatment and outcome of non-communicable diseases. The Gender Analysis Matrix developed by the World Health Organization was used to describe the findings of gender differences. Sex differences, biological susceptibility, gender norms/ values, roles and activities related to gender and access to/control over resources were themes for the differences in the relationship. A total of 15 out of 214 articles met the inclusion criteria. Majority of the studies were on risk factors of non-communicable diseases, particularly cardiovascular diseases. Gender differences in physical access to recreational facilities, neighbourhood perceptions of safety and walkability have been documented. Men and women showed differential preferences to walking, engaging in physical activity and in perceiving safety of the neighbourhood. Girls and boys showed differences in play activities at school and in their own neighbourhood environment. Safety from crime and safety from traffic were also perceived important to engage in physical activity. Gender norms and gender roles and activities have shown basis for the differences in the prevalence of non-communicable diseases. Sparse

Architecture of built-in microcontrollers in the U-70 complex control system

International Nuclear Information System (INIS)

Balakin, S.I.; Voevodin, V.P.; Inchagov, A.A.; Komarov, V.V.

2000-01-01

The distributed system of built-in microcontrollers (BMS) for functional control of supply sources of magnetooptical elements is created within the frames of works on modernization of the U-70 control complex. The BMS architecture and functional diagram of one of them are presented. The microcontrollers operation algorithm is based on the eventuation principle. The BMS basic parameters are presented [ru

Efficacy and safety of granulocyte, monocyte/macrophage adsorptive in pediatric ulcerative colitis

DEFF Research Database (Denmark)

Ruuska, Tarja; Küster, Peter; Grahnquist, Lena

2016-01-01

AIM: To investigate efficacy and safety for granulocyte, monocyte apheresis in a population of pediatric patients with ulcerative colitis. METHODS: The ADAPT study was a prospective, open-label, multicenter study in pediatric patients with moderate, active ulcerative colitis with pediatric...... ulcerative colitis activity index (PUCAI) of 35-64. Patients received one weekly apheresis with Adacolumn(®) granulocyte, monocyte/macrophage adsorptive (GMA) apheresis over 5 consecutive weeks, optionally followed by up to 3 additional apheresis treatments over 3 consecutive weeks. The primary endpoint...... mg daily on average from Baseline to week 12. CONCLUSION: Adacolumn(®) GMA apheresis treatment was effective in pediatric patients with moderate active Ulcerative Colitis. No new safety signals were reported. The present data contribute to considering GMA apheresis as a therapeutic option...

LIGHT SOURCE: A simulation study of Tsinghua Thomson scattering X-ray source

Science.gov (United States)

Tang, Chuan-Xiang; Li, Ren-Kai; Huang, Wen-Hui; Chen, Huai-Bi; Du, Ying-Chao; Du, Qiang; Du, Tai-Bin; He, Xiao-Zhong; Hua, Jian-Fei; Lin, Yu-Zhen; Qian, Hou-Jun; Shi, Jia-Ru; Xiang, Dao; Yan, Li-Xin; Yu, Pei-Cheng

2009-06-01

Thomson scattering X-ray sources are compact and affordable facilities that produce short duration, high brightness X-ray pulses enabling new experimental capacities in ultra-fast science studies, and also medical and industrial applications. Such a facility has been built at the Accelerator Laboratory of Tsinghua University, and upgrade is in progress. In this paper, we present a proposed layout of the upgrade with design parameters by simulation, aiming at high X-ray pulses flux and brightness, and also enabling advanced dynamics studies and applications of the electron beam. Design and construction status of main subsystems are also presented.

Context, built form and space: A case of public housing estates in Hong Kong

Directory of Open Access Journals (Sweden)

Rumana Afroz

2012-06-01

Full Text Available The context of public housing development in Hong Kong can be traced back to a deep rooted history when it was a need rather than a choice. At present, the public housing estates have become a much desired residential destination by the general people of Hong Kong although several changes in design have been observed that are not completely adapted by the residents. This study aims to investigate on the changing phenomenon of the context and the built form; and its impact on space in terms of adaptability by the residents. It has been found that, forced or formal communal spaces influenced by self-conscious culture discourage social interaction where quantitative measures are only applied, and informal communal spaces encouraged by unselfconscious culture bring happy social life. Contemporary built forms in the housing estates have changed a lot both externally and internally, and attention has been given to quantitative measures and formal spatial arrangements. As a result a gap is emerging between context, built form and adapted use of space. Therefore, measures such as qualitative approach, sensitively designed spatial arrangements are recommended to minimize the gap.

Mobile Timekeeping Application Built on Reverse-Engineered JPL Infrastructure

Science.gov (United States)

Witoff, Robert J.

2013-01-01

Every year, non-exempt employees cumulatively waste over one man-year tracking their time and using the timekeeping Web page to save those times. This app eliminates this waste. The innovation is a native iPhone app. Libraries were built around a reverse- engineered JPL API. It represents a punch-in/punch-out paradigm for timekeeping. It is accessible natively via iPhones, and features ease of access. Any non-exempt employee can natively punch in and out, as well as save and view their JPL timecard. This app is built on custom libraries created by reverse-engineering the standard timekeeping application. Communication is through custom libraries that re-route traffic through BrowserRAS (remote access service). This has value at any center where employees track their time.

Studies on the effect of compatibilizers on mechanical, thermal and flow properties of polycarbonate/poly (butylene terephthalate) blends

Science.gov (United States)

Kumar, Ravindra; Kar, Kamal K.; Kumar, Vijai

2018-01-01

Bisphenol-A polycarbonate (PC) and poly(butylene terephthalate) (PBT) were melt blended with ethylene-n-butylacrylate-glycidylmethacrylate terpolymer (E-BA-GMA) at various proportions in order to study the effects of compatibilizers on mechanical, thermal and flow properties of blends. Furthermore, on the basis of this study, PC and PBT were melt-blended at 60/40 proportion with three different compatibilizers viz., ethylene-n-butylacrylate copolymer (E-BA), E-BA-GMA and random copolymer of ethylene and glycidylmethacrylate (E-GMA) at 3 phr loading in a co-rotating twin screw extruder. Tensile, flexural and impact tests were carried out on injection molded samples of PC/PBT blends. The notched izod impact strength increases enormously (˜2-3 times) on addition of any one of the three compatibilizers, and elongation at break (%) also improves tremendously (3, 5 and 4 times) on incorporation of E-BA, E-BA-GMA and E-GMA copolymer, respectively while other mechanical properties decreases slightly (3%-8%) on addition of any one of these compatibilizers. The heat deflection temperature (HDT) raises ˜8 °C-9 °C on addition of either E-BA-GMA or E-GMA, while E-BA shows a negative effect on HDT. The melt flow index diminishes significantly (˜5%-20%) on incorporation of these compatibilizers. The morphology studies via scanning electron microscopy of these four blends were carried out to confirm the mechanical results.

Health and the Built Environment: Exploring Foundations for a New Interdisciplinary Profession

Science.gov (United States)

Kent, Jennifer; Thompson, Susan

2012-01-01

The supportive role of the built environment for human health is a growing area of interdisciplinary research, evidence-based policy development, and related practice. Nevertheless, despite closely linked origins, the contemporary professions of public health and urban planning largely operate within the neoliberal framework of academic, political, and policy silos. A reinvigorated relationship between the two is fundamental to building and sustaining an effective “healthy built environment profession.” A recent comprehensive review of the burgeoning literature on healthy built environments identified an emergent theme which we have termed “Professional Development.” This literature relates to the development of relationships between health and built environment professionals. It covers case studies illustrating good practice models for policy change, as well as ways professionals can work to translate research into policy. Intertwined with this empirical research is a dialogue on theoretical tensions emerging as health and built environment practitioners and researchers seek to establish mutual understanding and respect. The nature of evidence required to justify policy change, for example, has surfaced as an area of asynchrony between accepted disciplinary protocols. Our paper discusses this important body of research with a view to initiating and supporting the ongoing development of an interdisciplinary profession of healthy planning. PMID:23028393

Indigenous Past Climate Knowledge as Cultural Built-in Object and Its Accuracy

Directory of Open Access Journals (Sweden)

Christian Leclerc

2013-12-01

Full Text Available In studying indigenous climate knowledge, two approaches can be envisioned. In the first, traditional knowledge is a cultural built-in object; conceived as a whole, its relevance can be assessed by referring to other cultural, economic, or technical components at work within an indigenous society. In the second, the accuracy of indigenous climate knowledge is assessed with western science knowledge used as an external reference. However, assessing the accuracy of indigenous climate knowledge remains a largely untapped area. We aim to show how accurate the culturally built indigenous climate knowledge of extreme climatic events is, and how amenable it is to fuzzy logic. A retrospective survey was carried out individually and randomly among 195 Eastern African farmers on climatic reasons for loss of on-farm crop diversity from 1961 to 2006. More than 3000 crop loss events were recorded, and reasons given by farmers were mainly related to droughts or heavy rainfall. Chi-square statistics computed by Monte Carlo simulations based on 999 replicates clearly rejected independence between indigenous knowledge of drought and heavy rainfall that occurred in the past and rainfall records. The fuzzy logic nature of indigenous climatic knowledge appears in the clear association of drought or heavy rainfall events, as perceived by farmers, with corresponding extreme rainfall values, contrasting with a fuzzy picture in the intermediate climatic situations. We discuss how the cultural built-in knowledge helps farmers in perceiving and remembering past climate variations, considering the specificity of the contexts where extreme climatic events were experienced. The integration of indigenous and scientific climate knowledge could allow development of drought monitoring that considers both climatic and contextual data.

Influence of Glycidyl Methacrylate Grafting on the Mechanical, Water Absorption, and Thermal Properties of Recycled High-Density Polyethylene/Rubber Seed Shell Particle Composites

Directory of Open Access Journals (Sweden)

Kaimeng Xu

2016-01-01

Full Text Available Rubber seed shell (RSS was modified by grafting treatment using glycidyl methacrylate (GMA at various concentrations. The RSS was then used to reinforce high-density polyethylene (HDPE. The effects of modification on the mechanical, water absorption, and thermal properties of the RSS/HDPE composites were studied using a mechanical testing instrument, weighing method, Vicat softening temperature (VST testing, thermogravimetry, and dynamic mechanical analysis. The results showed that the GMA grafting produced an improvement in the flexural and tensile properties of the composites. The water absorption rate of the composites also had an obvious decrease. While a slight increase in VST was found, the various concentrations of GMA showed no improvement in VST. GMA modification also could elevate the thermal stability of the composites at the initial decomposition stage. The optimum grafting concentration of GMA (2.5% led to the lowest thermal weight loss (37.07% and 26.56% during the first and second decomposition stages. The E’ values of the composites had a significant increase with the addition of GMA. There were two peaks of tan δ for the untreated samples, but the modified samples exhibited a shift in the transition peak at higher temperatures; moreover, the second peak disappeared.

Incorporation of metal-organic framework HKUST-1 into porous polymer monolithic capillary columns to enhance the chromatographic separation of small molecules.

Science.gov (United States)

Yang, Shengchao; Ye, Fanggui; Lv, Qinghui; Zhang, Cong; Shen, Shufen; Zhao, Shulin

2014-09-19

Metal-organic framework (MOF) HKUST-1 nanoparticles have been incorporated into poly(glycidyl methacrylate-co-ethylene dimethacrylate) (HKUST-1-poly(GMA-co-EDMA)) monoliths to afford stationary phases with enhanced chromatographic performance of small molecules in the reversed phase capillary liquid chromatography. The effect of HKUST-1 nanoparticles in the polymerization mixture on the performance of the monolithic column was explored in detail. While the bare poly(GMA-co-EDMA) monolith exhibited poor resolution (RsHKUST-1 nanoparticles to the polymerization mixture provide high increased resolution (Rs≥1.3) and high efficiency ranged from 16,300 to 44,300plates/m. Chromatographic performance of HKUST-1-poly(GMA-co-EDMA) monolith was demonstrated by separation of various analytes including polycyclic aromatic hydrocarbons, ethylbenzene and styrene, phenols and aromatic acids using a binary polar mobile phase (CH3CN/H2O). The HKUST-1-poly(GMA-co-EDMA) monolith displayed enhanced hydrophobic and π-π interaction characteristics in the reversed phase separation of test analytes compared to the bare poly(GMA-co-EDMA) monolith. The experiment results showed that HKUST-1-poly(GMA-co-EDMA) monoliths are an alternative to enhance the chromatographic separation of small molecules. Copyright © 2014 Elsevier B.V. All rights reserved.

The Sensitive, Imaginative, Articulate Art Student and Conservative, Cool, Numerate Science Student: Individual Differences in Art and Science Students

Science.gov (United States)

Furnham, Adrian; Crump, John

2013-01-01

In all 794 young people aged around 30 yrs completed three intelligence (Raven's Progressive matrices: GMA Numerical and GMA Verbal) and one personality inventory (16PF). They were all graduates and 173 were identified clearly as Arts graduates and 518 as Science students. There were various sex differences on all measures. All seven hypotheses…

Quality Assurance for Space Instruments Built with COTS

DEFF Research Database (Denmark)

Guldager, Peter Buch; Thuesen, Gøsta Guldbæk; Jørgensen, John Leif

2005-01-01

be changed at any time and have major consequences to the components ability to survive the space environment. A safe way to protect to components, which are not Latch-Up immune, is to protect the components with a Latch-Up protection circuit. A strict control has to be established, when procuring COTS......Instruments for space can be built with COTS. However no radiation data are available for COTS, so the only way to ensure that the components can survive the space environment is to irradiate each component. Samples from each Lot have to be irradiated, because the manufac-turing process can...... component, testing and manufacturing the instrument before the instrument is qualified for space. By having a strict control with instrument built with COTS, it is possible to manufacture a reliable instrument as with Rad-Hard components....

Estudo de alguns parâmetros básicos da soldagem GMAW com transferência por curto-circuito Evaluation of basic parameters of short-circuit GMA welding

Directory of Open Access Journals (Sweden)

Paulo J. Modenesi

2011-03-01

Full Text Available O processo de soldagem GMAW é caracterizado por uma forte interdependência de seus parâmetros operacionais e uma grande sensibilidade a variações destes. Estas características podem causar variações nas condições operacionais, dificultando o estabelecimento e a reprodução destas condições que, usualmente precisam ser verificadas pela realização de testes. Como uma forma de minimizar esta dificuldade e facilitar o entendimento da relação entre as variáveis deste processo, tem-se trabalhado no desenvolvimento de um modelo matemático capaz de simular aspectos elétricos e operacionais da soldagem GMAW. O objetivo do presente trabalho foi estudar procedimentos de determinação e fatores que afetam duas variáveis fundamentais para o desenvolvimento deste modelo (a resistividade elétrica do arame durante a soldagem e a soma das quedas de tensão anódica e catódica no arco, U AC na soldagem com transferência por curto-circuito. Os testes experimentais envolveram a deposição mecanizada de cordões emaço de baixo carbono usando arames do mesmo material com diferentes gases de proteção. Metodologias para a determinação dos parâmetros citados foram desenvolvidas com base em procedimentos similares indicados na literatura. Os detalhes destes procedimentos são avaliados, os resultados obtidos são comparados com dados da literatura e métodos para estimar a resistência elétrica entre o bico de contato e o eletrodo são apresentados. Os resultados sugerem valores para esta resistência entre 6 e 9 mΩ.GMA welding is characterized by a strong dependence between its operational parameters and a high sensitivity to small variations of those. These characteristics tend to make it harder to replicate welding conditions. It is also a barrier to welding automation and makes it necessary to perform a number of real welding tests before determining operational conditions for a given application. In order to contribute to reduce

Policy analysis for energy efficiency in the built environment in Spain

International Nuclear Information System (INIS)

Yearwood Travezan, Jessica; Harmsen, Robert; Toledo, Gideon van

2013-01-01

Energy efficiency is considered one of the most cost effective ways to enhance security of energy supply and reduce greenhouse gas emissions. According to Europe's Energy Efficiency Plan, the biggest energy savings potential in the EU lies in the built environment. However, the many barriers to energy efficiency have prevented the implementation of the existing potential so far. This paper evaluates the existing policy instruments aimed at energy efficiency in buildings in Spain as laid down in the 2nd National Energy Efficiency Action Plan (NEEAP). The results show that the current policy package is insufficient to yield the existing energy savings potential in this sector. As much of the savings potential can be found in existing buildings and realization of this potential very much relies on voluntary action, the renovation sector is in need of an appropriate financial framework that mobilizes sufficient public and private financial resources, and transparent and efficient mechanisms to ensure the return on investment and payments from those who benefit from the renovation. Such financial framework needs to be supported by a regulatory framework that is tuned to existing buildings and an organizational framework that effectively connects the different policy layers in Spain. - Highlights: • We evaluate Spain's policies for efficiency improvement in the built environment. • We show that the policy measures in the 2nd NEEAP are insufficient to realize the savings potential. • Especially, the policy package for existing buildings needs to be strengthened

75 FR 33990 - Built-in Gains and Losses Under Section 382(h)

Science.gov (United States)

2010-06-16

... Gains and Losses Under Section 382(h) AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Final... section 382(h). DATES: Effective Date: These regulations are effective on June 11, 2010. Applicability...) regarding the treatment of prepaid income under the built-in gain provisions of section 382(h) were...

Effects of feed-borne Fusarium mycotoxins on hematology and immunology of turkeys.

Science.gov (United States)

Chowdhury, S R; Smith, T K; Boermans, H J; Woodward, B

2005-11-01

Feeding grains naturally-contaminated with Fusarium mycotoxins has been shown to alter the metabolism and performance of turkeys. The objectives of the current experiment were to examine the effects of feeding turkeys with grains naturally contaminated with Fusarium mycotoxins on their hematology and immunological indices (including functions), and the possible protective effect of feeding a polymeric glucomannan mycotoxin adsorbent (GMA). Two hundred twenty-five 1-d-old male turkey poults were fed corn, wheat, and soybean meal-based starter (0 to 3 wk), grower (4 to 6 wk), developer (7 to 9 wk), and finisher (10 to 12 wk) diets formulated with uncontaminated grains, contaminated grains, or contaminated grains with 0.2% GMA. The chronic consumption of Fusarium mycotoxins caused minor and transient changes in hematocrit (0.33 L/L) and hemoglobin (10(6) g/L) concentrations as well as in blood basophil (0.13 x 10(9)/L) and monocyte counts (3.42 x 10(9)/L) compared with controls. Supplementation of the contaminated diet with GMA prevented these effects on blood cell counts. Biliary IgA concentrations were significantly increased (4.45-fold) when birds were fed contaminated grains compared with controls, but serum IgA concentrations were not affected. Contact hypersensitivity to dinitrochlorobenzene, which is a CD8+ T-cell-mediated delayed-type hypersensitivity response, was decreased (48%) by feed-borne mycotoxins compared with the control. By contrast, the primary and secondary antibody response to sheep red blood cells, a CD4+ T-cell-mediated response, was not affected. It was concluded that chronic consumption of grains naturally contaminated with Fusarium mycotoxins exerts only minor adverse effects on the hematology and some immunological indices of turkeys. Consumption of grains naturally contaminated with Fusarium mycotoxins may, however, increase the susceptibility of turkeys to infectious agents against which CD8+ T cells play a major role in defense.

HUMAN PERCEPTION IN THE LIBYAN BUILT ENVIRONMENT: AL- KHUMS AND BANI WALID CITIES AS CASE STUDIES

Directory of Open Access Journals (Sweden)

Fawzi Mohamed Agael

2017-07-01

Full Text Available This paper is concerned with the identification of different influences on the built environment, and those which have a physical and psychological impact on people. The aim of this study is to analyze the impact of the built environment on the lives of people. The interrelationship between people and built environment is based on human perception. This research will explore this relationship further in order to develop a clear understanding of the ways in which architecture may influence peoples’ perceptions and experiences. Additionally, the research entails a comparison between two important theories: the first is an Image of the city derived using the Mental Map Theory; the second is related to Space Syntax Theory. The two theories will be applied in two different cities in Libya with the aim of assessing the importance of their interrelationship and how it may be understood more clearly. This paper will also provide guidelines for improving urban design and planning standards with the end goal of producing a high quality perception by those who actually use the space. Moreover, it concludes with a number of research avenues that should be pursued to answer how the properties of built environment affect human perception.

Built-up edge investigation in vibration drilling of Al2024-T6.

Science.gov (United States)

Barani, A; Amini, S; Paktinat, H; Fadaei Tehrani, A

2014-07-01

Adding ultrasonic vibrations to drilling process results in an advanced hybrid machining process, entitled "vibration drilling". This study presents the design and fabrication of a vibration drilling tool by which both rotary and vibrating motions are applied to drill simultaneously. High frequency and low amplitude vibrations were generated by an ultrasonic transducer with frequency of 19.65 kHz. Ultrasonic transducer was controlled by a MPI ultrasonic generator with 3 kW power. The drilling tool and workpiece material were HSS two-flute twist drill and Al2024-T6, respectively. The aim of this study was investigating on the effect of ultrasonic vibrations on built-up edge, surface quality, chip morphology and wear mechanisms of drill edges. Therefore, these factors were studied in both vibration and ordinary drilling. Based on the achieved results, vibration drilling offers less built-up edge and better surface quality compared to ordinary drilling. Copyright © 2014 Elsevier B.V. All rights reserved.

Correlated ground state and E2 giant resonance built on it

International Nuclear Information System (INIS)

Tohyama, Mitsuru

1995-01-01

Taking 16 O as an example of realistic nuclei, we demonstrate that a correlated ground state can be obtained as a long time solution of a time-dependent density-matrix formalism (TDDM) when the residual interaction is adiabatically treated. We also study in TDDM the E2 giant resonance of 16 O built on the correlated ground state and compare it with that built on the Hartree-Fock ground state. It is found that a spurious mixing of low frequency components seen in the latter is eliminated by using the correlated ground state. (author)

Characterizing Factors Associated with Built-Up Land Expansion in Urban and Non-Urban Areas from a Morphological Perspective

Directory of Open Access Journals (Sweden)

Zhonghao Zhang

2017-08-01

Full Text Available In this paper, built-up land expansion patterns and the associated factors were characterized in urban and non-urban areas across the Wen-Tai region of eastern China. Fractal dimension can be used as a reliable indicator of the complexity of built-up land form, and the increasing trend of fractal dimension indicated a more complex, dispersed pattern of built-up land in urban areas. Spatial regression models were quantitatively implemented to identify the indicators influencing the variation of fractal dimensions. Our findings suggested that the fractal dimension of built-up land forms was positively correlated to the patch density and elevation when built-up land expansion was more concentrated. Both landscape shape index and Gross Domestic Product (GDP were positively correlated with fractal dimension in urban areas, and total edge, edge density, and connective index had impacts on fractal dimension in non-urban areas. Slope and agricultural population also showed an influence on fractal dimension. This study provided a new way for urban studies in interpreting the complex interactions between fractal dimension and related factors. The combined approach of fractal dimension and spatial analysis can provide the government planners with valuable information that can be efficiently used to realize the influences of land use policies in urban and non-urban areas.

Impact of the Surrounding Built Environment on Energy Consumption in Mixed-Use Building

Directory of Open Access Journals (Sweden)

Young-Eun Woo

2018-03-01

Full Text Available While a mixture of residential and non-residential uses in urban development has advantages in reducing transportation energy consumption and improving efficiency of land utilization, the patterns of energy consumption in mixed-use buildings are largely unknown. To understand associations between the built environment and energy consumption and to find effective strategies for energy saving, this study aims to examine how the gas and electricity energy consumption of mixed-use properties is influenced by the characteristics of the immediate surroundings of the building as well as by the building’s attributes. The sample for this study is 22,109 mixed-use buildings in Seoul, Korea and the main source of outcome is electricity and gas energy consumption data retrieved from the open system of building data in 2015 and 2016. The regression results showed that a higher proportion of non-residential uses in mixed-use buildings was positively associated with higher electricity consumption overall but that it reduced gas energy use during the winter. In particular, increased restaurant and service use significantly influenced electricity consumption in the buildings. With regard to surrounding built environment, higher impervious surfaces and dense development near the buildings increased the electricity consumption of the buildings but it reduced gas energy consumption. Our results imply that, through the mediating effects of UHIs, the built environment characteristics of immediate surroundings may have indirect effects on energy consumption in mixed-use buildings.

Portable X-Ray, K-Edge Heavy Metal Detector

International Nuclear Information System (INIS)

Fricke, V.

1999-01-01

The X-Ray, K-Edge Heavy Metal Detection System was designed and built by Ames Laboratory and the Center for Nondestructive Evaluation at Iowa State University. The system uses a C-frame inspection head with an X-ray tube mounted on one side of the frame and an imaging unit and a high purity germanium detector on the other side. the inspection head is portable and can be easily positioned around ventilation ducts and pipes up to 36 inches in diameter. Wide angle and narrow beam X-ray shots are used to identify the type of holdup material and the amount of the contaminant. Precise assay data can be obtained within minutes of the interrogation. A profile of the containerized holdup material and a permanent record of the measurement are immediately available

Description of EMX computer code. System for measuring soft X rays

International Nuclear Information System (INIS)

Marty, D.A.; Smeulders, P.; Launois, D.

1978-07-01

After briefly describing the system for measuring soft X rays implanted in TFR 600, the objectives and principles of the E.M.X calculation programme are presented. This model is divided into two distinct parts. The ultimate aim of EMX 1, the first part, is to build the soft X ray photo of a plasma with varied characteristics, seen through a certain collimation system (in this case a slit). That of EMX 2, the second part, is to filter the previously built soft X ray photo, by means of the system of absorbents belonging to the measuring system and to calculate the currents generated by each detector aimed at a plasma chord. The first calculation results are commented and discussed [fr