WorldWideScience

Sample records for glutathione-dependent formaldehyde dehydrogenase

  1. Structure-function relationships in human glutathione-dependent formaldehyde dehydrogenase. Role of Glu-67 and Arg-368 in the catalytic mechanism.

    Science.gov (United States)

    Sanghani, Paresh C; Davis, Wilhelmina I; Zhai, LanMin; Robinson, Howard

    2006-04-18

    The active-site zinc in human glutathione-dependent formaldehyde dehydrogenase (FDH) undergoes coenzyme-induced displacement and transient coordination to a highly conserved glutamate residue (Glu-67) during the catalytic cycle. The role of this transient coordination of the active-site zinc to Glu-67 in the FDH catalytic cycle and the associated coenzyme interactions were investigated by studying enzymes in which Glu-67 and Arg-368 were substituted with Leu. Structures of FDH.adenosine 5'-diphosphate ribose (ADP-ribose) and E67L.NAD(H) binary complexes were determined. Steady-state kinetics, isotope effects, and presteady-state analysis of the E67L enzyme show that Glu-67 is critical for capturing the substrates for catalysis. The catalytic efficiency (V/K(m)) of the E67L enzyme in reactions involving S-nitrosoglutathione (GSNO), S-hydroxymethylglutathione (HMGSH) and 12-hydroxydodecanoic acid (12-HDDA) were 25 000-, 3000-, and 180-fold lower, respectively, than for the wild-type enzyme. The large decrease in the efficiency of capturing GSNO and HMGSH by the E67L enzyme results mainly because of the impaired binding of these substrates to the mutant enzyme. In the case of 12-HDDA, a decrease in the rate of hydride transfer is the major factor responsible for the reduction in the efficiency of its capture for catalysis by the E67L enzyme. Binding of the coenzyme is not affected by the Glu-67 substitution. A partial displacement of the active-site zinc in the FDH.ADP-ribose binary complex indicates that the disruption of the interaction between Glu-67 and Arg-368 is involved in the displacement of active-site zinc. Kinetic studies with the R368L enzyme show that the predominant role of Arg-368 is in the binding of the coenzyme. An isomerization of the ternary complex before hydride transfer is detected in the kinetic pathway of HMGSH. Steps involved in the binding of the coenzyme to the FDH active site are also discerned from the unique conformation of the coenzyme

  2. Purification and characterization of an NAD+-linked formaldehyde dehydrogenase from the facultative RuMP cycle methylotroph Arthrobacter P1

    NARCIS (Netherlands)

    Attwood, Margaret M.; Arfman, Nico; Weusthuis, Ruud A.; Dijkhuizen, Lubbert

    1992-01-01

    When Arthrobacter P1 is grown on choline, betaine, dimethylglycine or sarcosine, an NAD+-dependent formaldehyde dehydrogenase is induced. This formaldehyde dehydrogenase has been purified using ammonium sulphate fractionation, anion exchange- and hydrophobic interaction chromatography. The molecular

  3. Formaldehyde

    Science.gov (United States)

    Information on formaldehyde and the regulation of formaldehyde emissions from composite wood products under the Formaldehyde Standards for Composite Wood Products Act in the Toxic Substances Control Act (TSCA).

  4. Expression of a Rhizopus oryzae lipase in Pichia pastoris under control of the nitrogen source-regulated formaldehyde dehydrogenase promoter.

    Science.gov (United States)

    Resina, David; Serrano, Alícia; Valero, Francisco; Ferrer, Pau

    2004-04-08

    A Rhizopus oryzae lipase gene has been expressed in Pichia pastoris as a reporter using the formaldehyde dehydrogenase 1 promoter (PFLD1) of this organism, which has been reported to be strongly and independently induced by either methanol as sole carbon source or methylamine as sole nitrogen source. Levels of lipase expressed and secreted under the control of the PFLD1 at different induction conditions have been compared to those obtained with the commonly used alcohol oxidase 1 promoter (PAOX1) in small (shake flask) and 1l bioreactor batch cultures. PFLD1-controlled heterologous gene expression was strongly repressed by excess of either glycerol or glucose-but not sorbitol-during growth using methylamine both as sole nitrogen source and inducing substrate. Co-induction of PFLD1 with methanol and methylamine resulted in a synergistic effect on extracellular lipase expression levels. In all tested conditions, the substitution of ammonium for methylamine as carbon source provoked a clear decrease in the specific growth rate and yield of biomass per gram of carbon source. Overall, this study demonstrates that the PFLD1 promoter is at least as efficient as the PAOX1 for extracellular expression of heterologous proteins in P. pastoris bioreactor cultures and provides a first basis for the further design of methanol-free high cell density fed-batch cultivation strategies for controlled overproduction of foreign proteins in P. pastoris.

  5. Determination of formaldehyde in frozen fish with formaldehyde dehydrogenase using a flow injection system with an incorporated gel-filtration chromatrography column

    DEFF Research Database (Denmark)

    Bechmann, Iben Ell

    1996-01-01

    A flow injection analysis (FIA) system for determination of formaldehyde in frozen fish products is described. The system provides a rapid and selective determination of formaldehyde in aqueous fish extracts by the combination of a deproteinization procedure and a stopped-now enzymatic approach...... in a FIA system. The FIA system is furnished with a gel-filtration chromatography column for on-line removal of the proteins from the extract before the enzymatic analysis is performed. Compared with the standard methods for determination of formaldehyde in fish products the present method is much faster...... and less affected by interferences. The limit of detection for the proposed method is 2.5 mg/l of formaldehyde. The sampling frequency is about 10 determinations per hour....

  6. Determination of Formaldehyde in Frozen Fish with Formaldehyde Dehydrogenase Using a Flow Injection System with an Incorporated Gel-filtration Chromatography Column

    DEFF Research Database (Denmark)

    Bechmann, Iben Ellegaard

    1996-01-01

    A flow injection analysis (FIA) system for determination of formaldehyde in frozen fish products is described. The system provides a rapid and selective determination of formaldehyde in aqueous fish extracts by the combination of a deproteinization procedure and a stopped-flow enzymatic approach...... in a FIA system. The FIA system is furnished with a gel-filtration chromatography column for on-line removal of the proteins from the extract before the enzymatic analysis is performed. Compared with the standard methods for determination of formaldehyde in fish products the present method is much faster...... and less affected by interferences. The limit of detection for the proposed method is 2.5 mg/l of formaldehyde. The sampling frequency is about 10 determinations per hour....

  7. Engineering and analysis of a Saccharomyces cerevisiae strain that uses formaldehyde as an auxiliary substrate

    NARCIS (Netherlands)

    Baerends, Richard J. S.; de Hulster, Erik; Geertman, Jan-Maarten A.; Daran, Jean-Marc; van Maris, Antonius J. A.; Veenhuis, Marten; van der Klei, Ida J.; Pronk, Jack T.

    We demonstrated that formaldehyde can be efficiently coutilized by an engineered Saccharomyces cerevisiae strain that expresses Hansenula polymorpha genes encoding formaldehyde dehydrogenase (FLD1) and formate dehydrogenase (FMD), in contrast to wild-type strains. Initial chemostat experiments

  8. Study on the cytochrome P-450- and glutathione-dependent biotransformation of trichloroethylene in humans

    NARCIS (Netherlands)

    Bloemen, L. J.; Monster, A. C.; Kezic, S.; Commandeur, J. N.; Veulemans, H.; Vermeulen, N. P.; Wilmer, J. W.

    2001-01-01

    To investigate in humans the contribution of the cytochrome P-450- and glutathione-dependent biotransformation of trichloroethylene (TRI) under controlled repeated exposure in volunteers, and under occupational conditions. Volunteers were exposed to TRI, using repeated 15 min exposures at 50 and 100

  9. Biostimulation by methanol enables the methylotrophic yeasts Hansenula polymorpha and Trichosporon sp. to reveal high formaldehyde biodegradation potential as well as to adapt to this toxic pollutant.

    Science.gov (United States)

    Kaszycki, Paweł; Walski, Tomasz; Hachicho, Nancy; Heipieper, Hermann J

    2013-06-01

    The methylotrophic yeasts Hansenula polymorpha and Trichosporon sp. revealed enhanced biodegradation capability of exogenously applied formaldehyde (Fd) upon biostimulation achieved by the presence of methanol, as compared to glucose. Upon growth on either of the above substrates, the strains proved to produce the activity of glutathione-dependent formaldehyde dehydrogenase-the enzyme known to control the biooxidative step of Fd detoxification. However, in the absence of methanol, the yeasts' tolerance to Fd was decreased, and the elevated sensitivity was especially pronounced for Trichosporon sp. Both strains responded to the methanol and/or Fd treatment by increasing their unsaturation index (UI) at xenobiotic levels below minimal inhibitory concentrations. This indicated that the UI changes effected from the de novo synthesis of (poly) unsaturated fatty acids carried out by viable cells. It is concluded that the yeast cell response to Fd intoxication involves stress reaction at the level of membranes. Fluidization of the lipid bilayer as promoted by methanol is suggested as a significant adaptive mechanism increasing the overall fitness enabling to cope with the formaldehyde xenobiotic via biodegradative pathway of C1-compound metabolism.

  10. Histochemical localization of glutathione dependent NBT-reductase in mouse skin.

    Science.gov (United States)

    Shukla, Y

    2001-09-01

    Localization of the glutathione dependent Nitroblue tetrazolium (NBT) reductase in fresh frozen sections of mouse skin and possible dependence of NBT reductase on tissue thiol levels has been investigated. The fresh frozen tissue sections (8 m thickness) were prepared and incubated in medium containing NBT, reduced glutathione (GSH) and phosphate buffer. The staining for GSH was performed with mercury orange. The activity of the NBT-reductase in mouse skin has been found to be localized in the areas rich in glutathione and actively proliferating area of the skin. The activity of the NBT-reductase seems to be dependent on the glutathione contents.

  11. Glutathione-dependent extracellular ferric reductase activities in dimorphic zoopathogenic fungi

    Science.gov (United States)

    Zarnowski, Robert; Woods, Jon P.

    2009-01-01

    In this study, extracellular glutathione-dependent ferric reductase (GSH-FeR) activities in different dimorphic zoopathogenic fungal species were characterized. Supernatants from Blastomyces dermatitidis, Histoplasma capsulatum, Paracoccidioides brasiliensis and Sporothrix schenckii strains grown in their yeast form were able to reduce iron enzymically with glutathione as a cofactor. Some variations in the level of reduction were noted amongst the strains. This activity was stable in acidic, neutral and slightly alkaline environments and was inhibited when trivalent aluminium and gallium ions were present. Using zymography, single bands of GSH-FeRs with apparent molecular masses varying from 430 to 460 kDa were identified in all strains. The same molecular mass range was determined by size exclusion chromatography. These data demonstrate that dimorphic zoopathogenic fungi produce and secrete a family of similar GSH-FeRs that may be involved in the acquisition and utilization of iron. Siderophore production by these and other fungi has sometimes been considered to provide a full explanation of iron acquisition in these organisms. Our work reveals an additional common mechanism that may be biologically and pathogenically important. Furthermore, while some characteristics of these enzymes such as extracellular location, cofactor utilization and large size are not individually unique, when considered together and shared across a range of fungi, they represent an important novel physiological feature. PMID:16000713

  12. ENDURANCE TRAINING AND GLUTATHIONE-DEPENDENT ANTIOXIDANT DEFENSE MECHANISM IN HEART OF THE DIABETIC RATS

    Directory of Open Access Journals (Sweden)

    Mustafa Atalay

    2003-06-01

    Full Text Available Regular physical exercise beneficially influences cardiac antioxidant defenses in normal rats. The aim of this study was to test whether endurance training can strengthen glutathione-dependent antioxidant defense mechanism and decrease lipid peroxidation in heart of the streptozotocin-induced diabetic rats. Redox status of glutathione in blood of diabetic rats in response to training and acute exercise was also examined. Eight weeks of treadmill training increased the endurance in streptozotocin-induced diabetic rats. It did not affect glutathione level in heart tissue at rest and also after exercise. On the other hand, endurance training decreased glutathione peroxidase activity in heart, while glutathione reductase and glutathione S-transferase activities were not affected either by acute exhaustive exercise or endurance training. Reduced and oxidized glutathione levels in blood were not affected by either training or acute exercise. Conjugated dienes levels in heart tissue were increased by acute exhaustive exercise and also 8 weeks treadmill training. Longer duration of exhaustion in trained group may have contributed to the increased conjugated dienes levels in heart after acute exercise. Our results suggest that endurance type exercise may make heart more susceptible to oxidative stress. Therefore it may be wise to combine aerobic exercise with insulin treatment to prevent its adverse effects on antioxidant defense in heart in patients with diabetes mellitus

  13. Formaldehyde exposure and patterns of concomitant contact allergy to formaldehyde and formaldehyde-releasers

    DEFF Research Database (Denmark)

    Lundov, Michael D; Johansen, Jeanne D; Carlsen, Berit C

    2010-01-01

    Formaldehyde and formaldehyde-releasers are widely used in consumer products and may often cause contact allergy.......Formaldehyde and formaldehyde-releasers are widely used in consumer products and may often cause contact allergy....

  14. Development of a formaldehyde biosensor with application to synthetic methylotrophy.

    Science.gov (United States)

    Woolston, Benjamin M; Roth, Timothy; Kohale, Ishwar; Liu, David R; Stephanopoulos, Gregory

    2018-01-01

    Formaldehyde is a prevalent environmental toxin and a key intermediate in single carbon metabolism. The ability to monitor formaldehyde concentration is, therefore, of interest for both environmental monitoring and for metabolic engineering of native and synthetic methylotrophs, but current methods suffer from low sensitivity, complex workflows, or require expensive analytical equipment. Here we develop a formaldehyde biosensor based on the FrmR repressor protein and cognate promoter of Escherichia coli. Optimization of the native repressor binding site and regulatory architecture enabled detection at levels as low as 1 µM. We then used the sensor to benchmark the in vivo activity of several NAD-dependent methanol dehydrogenase (Mdh) variants, the rate-limiting enzyme that catalyzes the first step of methanol assimilation. In order to use this biosensor to distinguish individuals in a mixed population of Mdh variants, we developed a strategy to prevent cross-talk by using glutathione as a formaldehyde sink to minimize intercellular formaldehyde diffusion. Finally, we applied this biosensor to balance expression of mdh and the formaldehyde assimilation enzymes hps and phi in an engineered E. coli strain to minimize formaldehyde build-up while also reducing the burden of heterologous expression. This biosensor offers a quick and simple method for sensitively detecting formaldehyde, and has the potential to be used as the basis for directed evolution of Mdh and dynamic formaldehyde control strategies for establishing synthetic methylotrophy. © 2017 Wiley Periodicals, Inc.

  15. Formaldehyde in Our Environment.

    Science.gov (United States)

    Ojanlatva, Ansa; Weeks, Charlie A.

    During the energy crisis of the early 1970s, there was a drive to conserve energy in every segment of society. Citizens were encouraged to insulate their homes and tighten them up to avoid loss of energy. One of the products to emerge from this crisis was urea formaldehyde foam insulation. (Urea formaldehyde is a well-known agent for preserving…

  16. The formaldehyde dilemma.

    Science.gov (United States)

    Salthammer, Tunga

    2015-06-01

    The IARC's 2004 classification of formaldehyde as a human carcinogen has led to intensive discussion on scientific and regulatory levels. In June 2014, the European Union followed and classified formaldehyde as a cause of cancer. This automatically triggers consequences in terms of emission minimization and the health-related assessment of building and consumer products. On the other hand, authorities are demanding and authorizing technologies and products which can release significant quantities of formaldehyde into the atmosphere. In the outdoor environment, this particularly applies to combusting fuels. The formation of formaldehyde through photochemical smog has also been a recognized problem for years. Indoors there are various processes which can contribute to increased formaldehyde concentrations. Overall, legislation faces a dilemma: primary sources are often over-regulated while a lack of consideration of secondary sources negates the regulations' effects. Copyright © 2015 Elsevier GmbH. All rights reserved.

  17. Formaldehyde-releasers : relationship to formaldehyde contact allergy. Contact allergy to formaldehyde and inventory of formaldehyde-releasers

    NARCIS (Netherlands)

    de Groot, Anton C.; Flyvholm, Mari-ann; Lensen, Gerda; Menne, Torkil; Coenraads, Pieter-Jan

    2009-01-01

    This is one of series of review articles on formaldehyde and formaldehyde-releasers (others: formaldehyde in cosmetics, in clothes and in metalworking fluids and miscellaneous). Thirty-five chemicals were identified as being formaldehyde-releasers. Although a further seven are listed in the

  18. Glutathione-dependent detoxifying enzymes in rainbow trout liver: Search for specific biochemical markers of chemical stress

    Energy Technology Data Exchange (ETDEWEB)

    Petrivalsky, M. [Masaryk Univ., Brno (Czech Republic). Faculty of Science; Machala, M.; Nezveda, K. [Veterinary Research Inst., Brno (Czech Republic); Piacka, V. [Research Inst. of Fish Culture and Hydrobiology, Vodnany (Czech Republic); Svobodova, Z. [Research Inst. of Fish Culture and Hydrobiology, Vodnany (Czech Republic)]|[Univ. of Veterinary and Pharmaceutical Sciences, Brno (Czech Republic); Drabek, P. [Univ. of Veterinary and Pharmaceutical Sciences, Brno (Czech Republic)

    1997-07-01

    Activities of trout liver microsomal glutathione S-transferase (GST) and a series of cytosolic glutathione-dependent detoxifying enzymes were determined after a single intraperitoneal treatment with phenobarbital, 2,2-bis (p-chlorophenyl)-1,1-dichloroethane (p,p{prime}-DDE), 2,3-dimethoxynaphthoquinone (NQ), or 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). This study aimed to find xenobiotic-specific parameters applicable as biochemical markers of the impacts of the prototypal xenobiotics. The effects of xenobiotics on cytosolic GST activities were substrate dependent. The rate of conjugation of p-nitrobenzyl chloride was significantly induced by higher doses of p,p{prime}-DDE or NQ. The conjugation of ethacrynic acid was enhanced by phenobarbital, p,p{prime}-DDE, and NQ. The GST activity against 1,2-epoxy-3-(p-nitrophenoxy)propane was induced only by phenobarbital and by lower doses of p,p{prime}-DDE. The cytosolic GST activity, measured with 1-chloro-2,4-dinitrobenzene as a substrate, was only weakly increased by phenobarbital, TCDD, higher doses of p,p{prime}-DDE, or by NQ at the lowest dose of 1 mg/kg. Although the latter activity is frequently used as a biomarker in ecotoxicology, various factors (including its weak inducibility) indicate that this biochemical parameter is probably not a suitable indicator of contamination in fish. Similarly, cytosolic glutathione peroxidase was not affected by the prototypal xenobiotics and appeared to be an unsuitable bioindicator of oxidative impacts of the tested compounds. On the other hand, microsomal GST activity was nonspecifically increased by phenobarbital, NQ, TCDD, and high doses of p,p{prime}-DDE. Glutathione reductase, another potential biomarker of oxidative stress, was induced by phenobarbital, NQ, and, to a lesser extent, p,p{prime}-DDE; therefore it appeared to be a less sensitive indicator to the exposure to prototypal xenobiotics than the microsomal GST.

  19. Occupational contact allergy to formaldehyde and formaldehyde releasers.

    Science.gov (United States)

    Aalto-Korte, Kristiina; Kuuliala, O; Suuronen, K; Alanko, K

    2008-11-01

    Formaldehyde allergy is common and usually derives from formaldehyde-releasing biocides in cosmetic and other products. To analyse patterns of patch test reactions to formaldehyde and formaldehyde-releasing compounds and the sources of sensitization. At the Finnish Institute of Occupational Health, we screened the patch test files for allergic reactions to formaldehyde and 12 formaldehyde-releasing compounds. All patients with contact allergy to any of the substances were included, and their records were reviewed. Between January 2001 and May 2007, we had patch tested 81 patients with formaldehyde allergy and 18 with independent allergy to some formaldehyde releaser. Of the formaldehyde allergies, 60 were new sensitizations, 25 of which were considered to be occupational. The most common source of occupational sensitization was metalworking fluids followed by creams and related products. Exposure to formaldehyde-releasing preservatives in liquid soaps and other rinse-off products was common in both occupational and non-occupational cases. Reactions to formaldehyde-releasing compounds were seen in 79% of the formaldehyde-allergic patients. Occupational formaldehyde allergy was common and occurred in metalworkers, hairdressers, masseurs, and workers using protective creams, detergents, and liquid soaps. When compared with studies on general dermatological patients, contact allergy to formaldehyde releasers without formaldehyde allergy was rare.

  20. Growth of Candida boidinii on methanol and the activity of methanol-degrading enzymes as affected from formaldehyde and methylformate.

    Science.gov (United States)

    Aggelis, G; Margariti, N; Kralli, C; Flouri, F

    2000-06-23

    Formaldehyde and methylformate affect the growth of Candida boidinii on methanol and the activity of methanol-degrading enzymes. The presence of both intermediates in the feeding medium caused an increase in biomass yield and productivity and a decrease in the specific rate of methanol consumption. In the presence of formaldehyde, the activity of formaldehyde dehydrogenase and formate dehydrogenase was essentially increased, whereas the activity of methanol oxidase was decreased. On the contrary, the presence of methylformate caused an increase of the activity of methanol oxidase and a decrease of the activity of formaldehyde dehydrogenase and formate dehydrogenase. Interpretations concerning the yeast behavior in the presence of intermediate oxidation products were considered and discussed.

  1. Microfabricated Formaldehyde Gas Sensors

    Directory of Open Access Journals (Sweden)

    Karen C. Cheung

    2009-11-01

    Full Text Available Formaldehyde is a volatile organic compound that is widely used in textiles, paper, wood composites, and household materials. Formaldehyde will continuously outgas from manufactured wood products such as furniture, with adverse health effects resulting from prolonged low-level exposure. New, microfabricated sensors for formaldehyde have been developed to meet the need for portable, low-power gas detection. This paper reviews recent work including silicon microhotplates for metal oxide-based detection, enzyme-based electrochemical sensors, and nanowire-based sensors. This paper also investigates the promise of polymer-based sensors for low-temperature, low-power operation.

  2. Activation of the microsomal glutathione-S-transferase and reduction of the glutathione dependent protection against lipid peroxidation by acrolein

    NARCIS (Netherlands)

    Haenen, G R; Vermeulen, N P; Tai Tin Tsoi, J N; Ragetli, H M; Timmerman, H; Blast, A

    1988-01-01

    Allyl alcohol is hepatotoxic. It is generally believed that acrolein, generated out of allyl alcohol by cytosolic alcohol dehydrogenase, is responsible for this toxicity. The effect of acrolein in vitro and in vivo on the glutathione (GSH) dependent protection of liver microsomes against lipid

  3. Formaldehyde Workshop Agenda

    Science.gov (United States)

    This is the agenda for the Formaldehyde Workshop hosted by the Office of Research and Development's National Center for Environmental Assessments in cooperation with the IRIS Program. The workshop was held in April 2014

  4. Increased biliary excretion of glutathione is generated by the glutathione-dependent hepatobiliary transport of antimony and bismuth.

    Science.gov (United States)

    Gyurasics, A; Koszorús, L; Varga, F; Gregus, Z

    1992-10-06

    We have recently demonstrated that the hepatobiliary transport of arsenic is glutathione-dependent and is associated with a profound increase in biliary excretion of glutathione (GSH), hepatic GSH depletion and diminished GSH conjugation (Gyurasics A, Varga F and Gregus Z, Biochem Pharmacol 41: 937-944 and Gyurasics A, Varga F and Gregus Z, Biochem Pharmacol 42: 465-468, 1991). The present studies in rats aimed to determine whether antimony and bismuth, other metalloids in group Va of the periodic table, also possess similar properties. Antimony potassium tartrate (25-100 mumol/kg, i.v.) and bismuth ammonium citrate (50-200 mumol/kg, i.v.) increased up to 50- and 4-fold, respectively, the biliary excretion of non-protein thiols (NPSH). This resulted mainly from increased hepatobiliary transport of GSH as suggested by a close parallelism in the biliary excretion of NPSH and GSH after antimony or bismuth administration. Within 2 hr, rats excreted into bile 55 and 3% of the dose of antimony (50 mumol/kg, i.v.) and bismuth (150 mumol/kg, i.v.), respectively. The time courses of the biliary excretion of these metalloids and NPSH or GSH were strikingly similar suggesting co-ordinate hepatobiliary transport of the metalloids and GSH. However, at the peak of their excretion, each molecule of antimony or bismuth resulted in a co-transport of approximately three molecules of GSH. Diethyl maleate, indocyanine green and sulfobromophthalein (BSP), which decreased biliary excretion of GSH, significantly diminished excretion of antimony and bismuth into bile indicating that hepatobiliary transport of these metalloids is GSH-dependent. Administration of antimony, but not bismuth, decreased hepatic GSH level by 30% and reduced the GSH conjugation and biliary excretion of BSP. These studies demonstrate that the hepatobiliary transport of trivalent antimony and bismuth is GSH-dependent similarly to the hepatobiliary transport of trivalent arsenic. Proportionally to their biliary

  5. Effects of formaldehyde on mitochondrial dysfunction and apoptosis in SK-N-SH neuroblastoma cells.

    Science.gov (United States)

    Zerin, Tamanna; Kim, Jin-Sun; Gil, Hyo-Wook; Song, Ho-Yeon; Hong, Sae-Yong

    2015-12-01

    Methanol ingestion is neurotoxic in humans due to its metabolites, formaldehyde and formic acid. Here, we compared the cytotoxicity of methanol and its metabolites on different types of cells. While methanol and formic acid did not affect the viability of the cells, formaldehyde (200-800 μg/mL) was strongly cytotoxic in all cell types tested. We investigated the effects of formaldehyde on oxidative stress, mitochondrial respiratory functions, and apoptosis on the sensitive neuronal SK-N-SH cells. Oxidative stress was induced after 2 h of formaldehyde exposure. Formaldehyde at a concentration of 400 μg/mL for 12 h of treatment greatly reduced cellular adenosine triphosphate (ATP) levels. Confocal microscopy indicated that the mitochondrial membrane potential (MMP) was dose-dependently reduced by formaldehyde. A marked and dose-dependent inhibition of mitochondrial respiratory enzymes, viz., NADH dehydrogenase (complex I), cytochrome c oxidase (complex IV), and oxidative stress-sensitive aconitase was also detected following treatment with formaldehyde. Furthermore, formaldehyde caused a concentration-dependent increase in nuclear fragmentation and in the activities of the apoptosis-initiator caspase-9 and apoptosis-effector caspase-3/-7, indicating apoptosis progression. Our data suggests that formaldehyde exerts strong cytotoxicity, at least in part, by inducing oxidative stress, mitochondrial dysfunction, and eventually apoptosis. Changes in mitochondrial respiratory function and oxidative stress by formaldehyde may therefore be critical in methanol-induced toxicity.

  6. Formaldehyde-releasers: relationship to formaldehyde contact allergy. Contact allergy to formaldehyde and inventory of formaldehyde-releasers

    DEFF Research Database (Denmark)

    de Groot, Anton C; Flyvholm, Mari-Ann; Lensen, Gerda

    2009-01-01

    This is one of series of review articles on formaldehyde and formaldehyde-releasers (others: formaldehyde in cosmetics, in clothes and in metalworking fluids and miscellaneous). Thirty-five chemicals were identified as being formaldehyde-releasers. Although a further seven are listed in the liter......This is one of series of review articles on formaldehyde and formaldehyde-releasers (others: formaldehyde in cosmetics, in clothes and in metalworking fluids and miscellaneous). Thirty-five chemicals were identified as being formaldehyde-releasers. Although a further seven are listed...... of sensitization, relevance of positive patch test reactions, clinical pattern of allergic contact dermatitis from formaldehyde, prognosis, threshold for elicitation of allergic contact dermatitis, analytical tests to determine formaldehyde in products and frequency of exposure to formaldehyde and releasers....... The frequency of contact allergy to formaldehyde is consistently higher in the USA (8-9%) than in Europe (2-3%). Patch testing with formaldehyde is problematic; the currently used 1% solution may result in both false-positive and false-negative (up to 40%) reactions. Determining the relevance of patch test...

  7. Eerste inventarisatie alternatieven voor biociden met formaldehyde of formaldehyde releasers

    NARCIS (Netherlands)

    Wezenbeek JJ; Janssen MPM; Scheepmaker JWA; MSP; M&V

    2015-01-01

    Formaldehyde is de werkzame stof in veel desinfecteer- en conserveringsmiddelen, maar deze stof is kankerverwekkend. Daarom zal formaldehyde naar verwachting per 1 januari 2016 op Europees niveau als zodanig worden geclassificeerd (carcinogeen 1B). Dit kan betekenen dat formaldehyde-houdende

  8. Formaldehyde in reusable protective gloves.

    Science.gov (United States)

    Pontén, Ann

    2006-05-01

    Due to the clinical findings in a single patient's case, formaldehyde was suspected to be present in clinically relevant levels in reusable protective gloves. Therefore, 9 types of gloves were investigated with the semi-quantitative chromotropic acid method. It was found that 6/9 gloves emitted some formaldehyde and that 4/9 gloves emitted > or =40 microg of formaldehyde. Most of the formaldehyde was found on the inside of the gloves. To get an indication of the clinical relevance, a comparison with a protective cream declared to contain the formaldehyde-releasing agent diazolidinyl urea was performed by comparing areas of gloves with areas of cream layers with thickness 1-2 mg/cm(2). It was found that the amounts of formaldehyde emitted from the gloves might be in the same range as emitted from a layer of cream.

  9. Toxicity of formaldehyde and acrolein mixtures : in vitro studies using nasal epithelial cells

    NARCIS (Netherlands)

    Cassee, F.R.; Stenhuis, W.S.; Groten, J.P.; Feron, V.J.

    1996-01-01

    In vitro studies with human and rat nasal epithelial cells were carried out to investigate the combined toxicity of formaldehyde and acrolein and the role of aldehyde dehydrogenases in this process. These studies showed that the toxic effect of mixtures of aldehydes was additive. In addition,

  10. Emission of formaldehyde from furniture

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke; Klinke, Helene B.; Funch, Lis Winther

    The emission of formaldehyde from 20 pieces of furniture, representing a variety of types, was measured in climate chambers. Most tests show low emissions but certain scenarios of furnishing, including furniture with large surface areas in relation to room volume can emit formaldehyde resulting...

  11. Growth of Pseudomonas C on C1 compounds: enzyme activites in extracts of Pseudomonas C cells grown on methanol, formaldehyde, and formate as sole carbon sources.

    Science.gov (United States)

    Goldberg, I; Mateles, R I

    1975-01-01

    Pseudomonas C can grow on methanol, formaldehyde, or formate as sole carbon source. It is proposed that the assimilation of carbon by Pseudomonas C grown on different C1 growth substrates proceeds via one of two metabolic pathways, the serine pathway or the allulose pathway (the ribose phosphate cycle of formaldehyde fixation). This contention is based on the distribution of two key enzymes, each of which appears to be specifically involved in one of the assimilation pathways, glycerate dehydrogenase (serine pathway) and hexose phosphate synthetase (allulose pathway). The assimilation of methanol in Pseudomonas C cells appears to occur via the allulose pathway, whereas the utilization of formaldehyde or formate in cells grown on formaldehyde or formate as sole carbon sources appears by the serine pathway. When methanol is present together with formaldehyde or formate in the growth medium, the formaldehyde or formate is utilized by the allulose pathway. PMID:235511

  12. Relations between metals (Zn, Pb, Cd and Cu) and glutathione-dependent detoxifying enzymes in spiders from a heavy metal pollution gradient

    International Nuclear Information System (INIS)

    Wilczek, Grazyna; Babczynska, Agnieszka; Augustyniak, Maria; Migula, Pawel

    2004-01-01

    We studied the relations between glutathione-dependent detoxifying enzymes and heavy metal burdens in the web-building spider Agelena labyrinthica (Agelenidae) and the wolf spider Pardosa lugubris (Lycosidae) from five meadow sites along a heavy metal pollution gradient. We assayed the activity of glutathione-S-transferase (GST) and glutathione peroxidases (GPOX, GSTPx), and glutathione (GSH) levels in both sexes. Except for GSH vs Pb content, we found significant correlations between GPOX and GSTPx activity and metal concentrations in females of A. labyrinthica. The highest activity of these enzymes measured in the web-building spiders was found in the individuals from the most polluted sites. In P. lugubris males significant correlations were found between GST and Pb and Zn concentrations, and between GPOX and GSTPx and the concentration of Cu. GST activity was higher in males collected from less polluted areas. Thus, detoxifying strategies against pollutants seemed to be sex-dependent. Actively hunting spiders had higher metal concentrations, maintaining lower activity of detoxifying enzymes and a lower glutathione level. - Capsule: Glutathione-linked enzyme activity in spiders from polluted areas depends on hunting strategy and sex

  13. Protect Against Exposure on Formaldehyde

    Science.gov (United States)

    Formaldehyde is an important chemical used widely by industry to manufacture building materials and numerous household products. It is also a by-product of combustion and certain other natural processes.

  14. and phenol–formaldehyde resin

    Indian Academy of Sciences (India)

    formaldehyde resin (PFR) modified with tetraethylorthosilicate are investigated in detail. The chemical synthesis of PFR, its modification with nanometer- sized SiO2 particles created by sol–gel method and subsequent coating, enables a preparation of ...

  15. Absorption of formaldehyde in water

    NARCIS (Netherlands)

    Winkelman, Jozef Gerhardus Maria

    2003-01-01

    Deze dissertatie beschrijft theoretisch en experimenteel werk aan de absorptie van formaldehyde in water. Met resultaten hiervan zijn chemisch-technische modellen ontwikkeld voor de beschrijving en optimalisatie van industriële formaldehydeabsorbeurs. Deze samenvatting geeft eerst algemene

  16. Monitoring of formaldehyde in air.

    Science.gov (United States)

    Balmat, J L; Meadows, G W

    1985-10-01

    Any one of several monitoring methods, depending on requirement and circumstance, can be used to measure employee exposure to formaldehyde. Ordinarily, monitoring at DuPont is performed by sampling with impingers containing 1% aqueous sodium bisulfite or with silica gel tubes. The collected formaldehyde is measured spectrophotometrically after reaction with chromotropic acid. Results from studies on a selected number of formaldehyde monitoring methods reveal that reliable methods are available for area and personnel monitoring over both short term and long term. Accurate results are obtained from short-term monitoring (15 min at 1 L/min) with impingers of formaldehyde concentrations as low as 0.14 ppm. The current studies show that long-term monitoring (8 hr at 0.5 L/min) can be performed accurately at concentrations as low as 0.05 ppm. Accurate results also are obtained from short-term monitoring (15 min at 500 mL/min) with silica gel tubes of concentrations as low as 0.11 ppm formaldehyde; the lower limit established in the current studies for long-term monitoring (8 hr at 30 mL/min) is 0.15 ppm. Passive monitors provide the most convenient means of obtaining 8-hour time-weighted average (TWA) data. The Pro-Tek Formaldehyde Badge was demonstrated to reliably monitor formaldehyde concentrations varying from 0-0.5 ppm or 0-3 ppm. All of these methods satisfy the NIOSH criterion for acceptability that all results fall within +/- 25% of the true value at the 95% confidence level. Investigation of the Lion Formaldemeter disclosed that instantaneous and accurate (+/- 5%) measurement of formaldehyde in air can be made over a concentration range of 0.3-5 ppm in the absence of other substances that are oxidizable in its fuel cell detector.

  17. Formaldehyde stress responses in bacterial pathogens

    Directory of Open Access Journals (Sweden)

    Nathan Houqian Chen

    2016-03-01

    Full Text Available Formaldehyde is the simplest of all aldehydes and is highly cytotoxic. Its use and associated dangers from environmental exposure have been well documented. Detoxification systems for formaldehyde are found throughout the biological world and they are especially important in methylotrophic bacteria, which generate this compound as part of their metabolism of methanol. Formaldehyde metabolizing systems can be divided into those dependent upon pterin cofactors, sugar phosphates and those dependent upon glutathione. The more prevalent thiol-dependent formaldehyde detoxification system is found in many bacterial pathogens, almost all of which do not metabolize methane or methanol. This review describes the endogenous and exogenous sources of formaldehyde, its toxic effects and mechanisms of detoxification. The methods of formaldehyde sensing are also described with a focus on the formaldehyde responsive transcription factors HxlR, FrmR and NmlR. Finally, the physiological relevance of detoxification systems for formaldehyde in bacterial pathogens is discussed.

  18. Formaldehyde - An Assessment of its Health Effects.

    Science.gov (United States)

    1980-03-01

    formaldehyde mutagenesis has not been resolved. Formaldehyde may cause mutations by reacting directly with DNA ; by forming mutagenic products on...reaction with amino groups on simple amines, amino acids, nucleic acids, or proteins; or by oxidizing to peroxides that can react directly with DNA or...species of grasshoppers , formaldehyde caused chromosomal damage (Manna and Parida, 1967). Germinating barley seeds soaked in formaldehyde solutions did not

  19. Quantitative determination of formaldehyde by spectrophotometry ...

    African Journals Online (AJOL)

    Formaldehyde is a vastly used material in industry. Nowadays, it is proven that formaldehyde is toxic and carcinogenic. Thus providing a reliable method for its quantitative determination is very important. This study proposes a UV-Vis spectrophotometric based method for determination of formaldehyde. The method is ...

  20. Effect of urea formaldehyde viscosity on urea formaldehyde and ...

    African Journals Online (AJOL)

    The melting point, refractive index, density and formaldehyde emission were found to increase with increase in UF viscosity while the dry time, moisture uptake and elongation at break were found to decrease with increase in viscosity. UF viscosity below 10.82 mPa.s was found to produce UF/UP copolymer composite which ...

  1. Formaldehyde in cosmetics in patch tested dermatitis patients with and without contact allergy to formaldehyde.

    Science.gov (United States)

    Hauksson, Inese; Pontén, Ann; Isaksson, Marléne; Hamada, Haneen; Engfeldt, Malin; Bruze, Magnus

    2016-03-01

    Formaldehyde is a well-known contact sensitizer. Formaldehyde releasers are widely used preservatives in cosmetics. To survey the release of formaldehyde in cosmetics brought by patients investigated because of suspected allergic contact dermatitis, to compare it with information given by the manufacturers on the packages, and to investigate whether formaldehyde-allergic patients are potentially exposed to more cosmetics releasing formaldehyde than dermatitis patients without contact allergy to formaldehyde. Cosmetics from 10 formaldehyde-allergic and 30 non-allergic patients (controls) matched for age and sex were investigated with the chromotropic acid spot test, which is a semiquantitative method measuring the release of formaldehyde. Formaldehyde was found in 58 of 245 (23.7%) products. Twenty-six of 126 (20.6%) leave-on products released formaldehyde, and 17 of 26 (65.4%) of these were not declared to contain formaldehyde or formaldehyde releasers. Among the rinse-off products, there were 32 of 119 (26.8%) formaldehyde-releasing products, and nine of 32 (28.0%) of these were not labelled as containing formaldehyde or formaldehyde releasers. Five of 10 formaldehyde-allergic patients brought leave-on products with ≥ 40 ppm formaldehyde, as compared with 4 of 30 in the control group (p = 0.029). Cosmetic products used by formaldehyde-allergic patients that are not declared to contain formaldehyde or formaldehyde-releasing preservatives should be analysed. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. Formaldehyde monitor for automobile exhausts

    Science.gov (United States)

    Easley, W. C.

    1973-01-01

    Device makes use of microwave spectral absorption in low-Q resonant Stark cell, and indications are that ultimate sensitivity of instrument is within 100 parts per billion of formaldehyde. Microwave source is very small and requires only six-volt dc bias for operation. Coarse tuning is accomplished mechanically and fine tuning by adjusting dc-bias voltage.

  3. Induction of formaldehyde contact sensitivity

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Boman, A; Vølund, A

    1985-01-01

    , and formaldehyde 1% and 0.1% was used for challenge. The incidence of contact sensitivity depended on the intradermal, but not on the topical induction dose. Statistical analyses showed a non-monotonous (non-linear) dose response relationship. The estimated maximal sensitization rate in Copenhagen was 80% after...

  4. Glucose-6-phosphate dehydrogenase

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003671.htm Glucose-6-phosphate dehydrogenase test To use the sharing features on this page, please enable JavaScript. Glucose-6-phosphate dehydrogenase (G6PD) is a protein that ...

  5. Endogenous Formaldehyde Is a Hematopoietic Stem Cell Genotoxin and Metabolic Carcinogen

    Science.gov (United States)

    Pontel, Lucas B.; Rosado, Ivan V.; Burgos-Barragan, Guillermo; Garaycoechea, Juan I.; Yu, Rui; Arends, Mark J.; Chandrasekaran, Gayathri; Broecker, Verena; Wei, Wei; Liu, Limin; Swenberg, James A.; Crossan, Gerry P.; Patel, Ketan J.

    2015-01-01

    Summary Endogenous formaldehyde is produced by numerous biochemical pathways fundamental to life, and it can crosslink both DNA and proteins. However, the consequences of its accumulation are unclear. Here we show that endogenous formaldehyde is removed by the enzyme alcohol dehydrogenase 5 (ADH5/GSNOR), and Adh5−/− mice therefore accumulate formaldehyde adducts in DNA. The repair of this damage is mediated by FANCD2, a DNA crosslink repair protein. Adh5−/−Fancd2−/− mice reveal an essential requirement for these protection mechanisms in hematopoietic stem cells (HSCs), leading to their depletion and precipitating bone marrow failure. More widespread formaldehyde-induced DNA damage also causes karyomegaly and dysfunction of hepatocytes and nephrons. Bone marrow transplantation not only rescued hematopoiesis but, surprisingly, also preserved nephron function. Nevertheless, all of these animals eventually developed fatal malignancies. Formaldehyde is therefore an important source of endogenous DNA damage that is counteracted in mammals by a conserved protection mechanism. PMID:26412304

  6. A new airborne formaldehyde instrument: Compact Formaldehyde Fluorescence Experiment (COFFEE)

    Science.gov (United States)

    Hanisco, T. F.; Bailey, S. A.; Swanson, A. K.; Wolfe, G. M., Jr.

    2014-12-01

    We present the operating principles of a new instrument designed for operation on small aircraft. The instrument uses a new non-resonant fluorescence technique to take advantage of compact industrial lasers to make a small, robust package that can measure formaldehyde at sensitivities better than 100 ppt in 1 second integration. The instrument is designed to fly on the Alphajet at NASA Ames but can be modified to fly on other small aircraft.

  7. ALLERGIC CONTACT DERMATITIS FROM FORMALDEHYDE EXPOSURE.

    Directory of Open Access Journals (Sweden)

    Maya Lyapina

    2012-10-01

    Full Text Available Formaldehyde is a ubiquitous chemical agent, a part of our outdoor and indoor working and residential environment. Healthcare workers in difficult occupations are among the most affected by formaldehyde exposure. Formaldehyde is an ingredient of some dental materials. Formaldehyde is well-known mucous membrane irritant and a primary skin sensitizing agent associated with both contact dermatitis (Type IV allergy, and immediate, anaphylactic reactions (Type I allergy. Inhalation exposure to formaldehyde was identified as a potential cause of asthma. Quite a few investigations are available concerning health issues for dental students following formaldehyde exposure. Such studies would be beneficial for early diagnosis of hypersensitivity, adequate prophylactic, risk assessment and management of their work.

  8. Microwave Cure of Phenol-Formaldehyde Adhesive

    OpenAIRE

    高谷, 政広; 田平, 英敏; 岡本, 忠

    2006-01-01

    [Synopsis] Phenol-formaldehyde resin has been used as a versatile material for adhesives and coatings of a wide range of adherends because of its excellent performance in water- resistance, strength against abrasion, and so on. However, it has a drawback of slow rate of cure and relevant emission of formaldehyde gas after bonding. We studied the curing performance under irradiation of microwave for the purpose of looking for a way of accelerating the cure rate of phenol formaldehyde resin. Th...

  9. Kinetics based reaction optimization of enzyme catalysed reduction of formaldehyde to methanol with synchronous cofactor regeneration

    DEFF Research Database (Denmark)

    Marpani, Fauziah Binti; Sárossy, Zsuzsa; Pinelo, Manuel

    2017-01-01

    regeneration using either glucose dehydrogenase (System I) or xylose dehydrogenase (System II). A mathematical model of the enzyme kinetics was employed to identify the best reaction set-up for attaining optimal cofactor recycling rate and enzyme utilization efficiency. Targeted process optimization......Enzymatic reduction of carbon dioxide (CO2 ) to methanol (CH3 OH) can be accomplished using a designed set-up of three oxidoreductases utilizing reduced pyridine nucleotide (NADH) as cofactor for the reducing equivalents electron supply. For this enzyme system to function efficiently a balanced...... regeneration of the reducing equivalents during reaction is required. Herein, we report the optimization of the enzymatic conversion of formaldehyde (CHOH) to CH3 OH by alcohol dehydrogenase, the final step of the enzymatic redox reaction of CO2 to CH3 OH, with kinetically synchronous enzymatic cofactor...

  10. 78 FR 51696 - Formaldehyde; Third-Party Certification Framework for the Formaldehyde Standards for Composite...

    Science.gov (United States)

    2013-08-21

    ... AGENCY 40 CFR Part 770 RIN 2070-AJ44 Formaldehyde; Third-Party Certification Framework for the Formaldehyde Standards for Composite Wood Products; Extension of Comment Period AGENCY: Environmental... formaldehyde standards for composite wood products. After receiving requests for an extension, EPA extended the...

  11. 78 FR 44090 - Formaldehyde; Third-Party Certification Framework for the Formaldehyde Standards for Composite...

    Science.gov (United States)

    2013-07-23

    ... AGENCY 40 CFR Part 770 RIN 2070-AJ44 Formaldehyde; Third-Party Certification Framework for the Formaldehyde Standards for Composite Wood Products; Extension of Comment Period AGENCY: Environmental... formaldehyde standards for composite wood products. This document extends the comment period from August 9...

  12. Initial inventory of alternatives to biocidal products containing formaldehyde of formaldehyde releasers

    NARCIS (Netherlands)

    Wezenbeek JM; Janssen MPM; Scheepmaker JWA; MSP; M&V

    2015-01-01

    Formaldehyde is de werkzame stof in veel desinfecteer- en conserveringsmiddelen, maar deze stof is kankerverwekkend. Daarom zal formaldehyde naar verwachting per 1 januari 2016 op Europees niveau als zodanig worden geclassificeerd (carcinogeen 1B). Dit kan betekenen dat formaldehyde-houdende

  13. Formaldehyde Emissions from Urea-Formaldehyde- and no-added-formaldehyde-Bonded particleboard as Influenced by Temperature and Relative Humidity

    Science.gov (United States)

    Charles R. Frihart; James M. Wescott; Timothy L. Chaffee; Kyle M. Gonner

    2012-01-01

    It is well documented that temperature and humidity can influence formaldehyde emissions from composite panels that are produced using urea-formaldehyde (UF)–type adhesives. This work investigates the effect of temperature and humidity on newer commercial California Air Resources Board (CARB) phase II–compliant particleboard produced with UF-type adhesives. These...

  14. short communication quantitative determination of formaldehyde

    African Journals Online (AJOL)

    Preferred Customer

    ALS). Data processing by this chemometrics technique enhanced the reliability of the UV-Vis spectrophotometry for quantitative analysis of formaldehyde in real samples. KEY WORDS: Formaldehyde, Fluoral P, UV-Visible, Multivariate curve resolution alternating least squares;. Quantitative analysis. INTRODUCTION.

  15. 29 CFR 1915.1048 - Formaldehyde.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Formaldehyde. 1915.1048 Section 1915.1048 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED... Formaldehyde. Note: The requirements applicable to shipyard employment under this section are identical to...

  16. 29 CFR 1926.1148 - Formaldehyde.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Formaldehyde. 1926.1148 Section 1926.1148 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1148 Formaldehyde...

  17. Formaldehyde concentration in diagnostic patch testing

    DEFF Research Database (Denmark)

    Trattner, A; Johansen, J D; Menné, T

    1998-01-01

    Exposure to formaldehyde is common from both consumer products and industry. The reliability of the patch test is essential for the diagnosis of formaldehyde allergy as it is difficult to suspect from the patient's history. The recommended formaldehyde patch test concentration has been reduced over......% in consecutively patch-tested patients, with respect to frequency of positive patch test reactions, strength of patch test reactions to different formaldehyde test concentrations, irritancy and relevance. The study included 3734 consecutively patch tested patients. 121 gave a positive reaction to 1% and/or 2...... gave few additional positive cases compared to D 3/4. Problems related to relevance are discussed. Based on present knowledge, a 1% patch test concentration for formaldehyde is recommended....

  18. Denaturation and electrophoresis of RNA with formaldehyde.

    Science.gov (United States)

    Rio, Donald C

    2015-02-02

    Electrophoretic size fractionation can be used to denature and separate large mRNA molecules (0.5-10 kb) on formaldehyde-containing agarose gels. Formaldehyde contains a carbonyl group that reacts to form Schiff bases with the imino or amino groups of guanine, adenine, and cytosine. These covalent adducts prevent normal base pairing and maintain the RNA in a denatured state. Because these adducts are unstable, formaldehyde must be present in the gel to maintain the RNA in the denatured state. This protocol describes the preparation of an agarose gel with formaldehyde and its setup in a horizontal electrophoresis apparatus. RNA samples are prepared and denatured in a solution of formamide and formaldehyde and, with 0.5- to 10-kb size markers, subjected to electrophoresis through the gel. Following electrophoresis, the gel is stained to visualize RNA markers or rRNA using one of several different types of stains. © 2015 Cold Spring Harbor Laboratory Press.

  19. The Effect of Formaldehyde Fixation on RNA

    Science.gov (United States)

    Evers, David L.; Fowler, Carol B.; Cunningham, Brady R.; Mason, Jeffrey T.; O'Leary, Timothy J.

    2011-01-01

    Formalin-fixed, paraffin-embedded tissues generally provide low yields of extractable RNA that exhibit both covalent modification of nucleic acid bases and strand cleavage. This frustrates efforts to perform retrospective analyses of gene expression using archival tissue specimens. A variety of conditions have been reported to demodify formaldehyde-fixed RNA in different model systems. We studied the reversal of formaldehyde fixation of RNA using a 50 base RNA oligonucleotide and total cellular RNA. Formaldehyde-adducted, native, and hydrolyzed RNA species were identified by their bioanalyzer electrophoretic migration patterns and RT–quantitative PCR. Demodification conditions included temperature, time, buffer, and pH. The reversal of formaldehyde-fixed RNA to native species without apparent RNA hydrolysis was most successfully performed in dilute Tris, phosphate, or similar buffers (pH 8) at 70°C for 30 minutes. Amines were not required for efficient formaldehyde demodification. Formaldehyde-fixed RNA was more labile than native RNA to treatment with heat and buffer, suggesting that antigen retrieval methods for proteins may impede RNA hybridization or RNA extraction. Taken together, the data indicate that reliable conditions may be used to remove formaldehyde adducts from RNA to improve the quality of RNA available for molecular studies. PMID:21497290

  20. Effects of free formaldehyde emission reduction by ammonia fuming ...

    African Journals Online (AJOL)

    Particleboards made using formaldehyde adhesives cause substantial emission of free formaldehyde over time. Free formaldehyde is harmful to the user's health and it also weakens internal bonds of particleboards in use. Emissions levels of formaldehyde lie between 0.8 to 2.2 g/m3 of indoor air in particleboards ...

  1. Reduction of the formaldehyde content in leathers treated with formaldehyde resins by means of plant polyphenols

    OpenAIRE

    Marsal Monge, Agustín; Manich Bou, Albert M.; Cuadros Domènech, Sara; Font Vallès, Joaquim

    2017-01-01

    Formaldehyde has applications in many industrial processes, including synthesis of resins and syntans to be used in the retanning process of leather. When resins are employed, they can hydrolyse, releasing formaldehyde. Due to the carcinogenicity of formaldehyde, its presence in leather should be avoided or kept below allowable limits. The aim of this study is to determine the effect of polyphenols contained in vegetable compounds (mimosa, quebracho and tara) in the reduction of the forma...

  2. Synthesis and characterization of formaldehyde by catalytic oxidation of methanol

    International Nuclear Information System (INIS)

    Salman, M.; Answer, J.; Zaman, W.U.

    2008-01-01

    The catalytic oxidation of methanol to formaldehyde is studied over copper and silver catalysts. The impact of various factors catalytic poisoning, temperature, contact time on the formaldehyde yield have been investigated. An assembly using copper and silver as catalysts has been proposed to prepare formaldehyde in perspective of Pakistan in local industry. All the conditions to optimize the formaldehyde yield were also investigated. The formaldehyde produced was standardized chemically as well as spectroscopically. (author)

  3. Photochemical decomposition of Formaldehyde in solution

    International Nuclear Information System (INIS)

    Garrido Z, G.

    1995-01-01

    In this work was studied the effect of ultraviolet radiation produced by a mercury low pressure lamp in solutions of formaldehyde. These solutions were exposed to ultraviolet rays at different times. In some of these series of solutions was added a photosensibilizer in order to obtain a high photodecomposition of formaldehyde. The techniques used for determine the products of the decomposition were the following: 1. In order to measure the residual formaldehyde and glioxal, the Hantzsch and 2,4-dinitrophenylhydrazine methods were used. 2. pH's measurements of the solutions, before and after exposition. 3. Paper's chromatography for determine presence of formed acids. 4. Acid-base tritiations for measure total acidification. We observed that when the time of exposition to UV rays was increased, a high photodecomposition of formaldehyde was formed and, besides, a greater quantity of another products. Of the reagents used like photosensibilizers, with the ruthenium reagent, the best results were obtained. (Author)

  4. Formaldehyde's Impact on Indoor Air Quality

    Science.gov (United States)

    Formaldehyde is an important chemical used widely by industry to manufacture building materials and numerous household products. It is also a by-product of combustion and certain other natural processes.

  5. Compact, Ultrasensitive Formaldehyde Monitor, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovative Research Phase I proposal seeks to develop an ultrasensitive, laser-based formaldehyde gas sensor system for airborne and ground-based...

  6. Radiation thermal transformations of formaldehyde in alcohols

    International Nuclear Information System (INIS)

    Vetrov, V.S.; Korolev, V.M.; Koroleva, G.N.; Likholap, V.F.; Khomich, F.G.

    1978-01-01

    The effect of acid and reactor gamma radiation on the interaction of formaldehyde and methanol has been studied. The radiation-thermal investigations were carried out in the range of temperatures from 150 to 230 deg C. A dose rate of n,γ-radiation amounted to 2.4x10 17 eV (gxs). From the data obtained it is concluded that the 0.01-0.1 M formic acid addition and irradiation of the methanol-formaldehyde mixture result in a substantial increase in formaldehyde consumption, the acid addition increasing the rate of formaldehyde consumption in about two times; the n,γ-radiation effect is much powerful. The rate of methylal formation increases in the presence of acid and at the temperature rise; its maximum is formed in the range of 180-190 deg C. The methyl formiate formation increases with the acid addition and temperature rise. It is concluded that radiolytic protons can accelerate methylal formation from methanol-formaldehyde solutions. The temperature rise results in the concentration increase in a free form of formaldehyde and the formation of methylal and methyl formiate

  7. Enzymatic conversion of CO2 to CH3OH via reverse dehydrogenase cascade biocatalysis: Quantitative comparison of efficiencies of immobilized enzyme systems

    DEFF Research Database (Denmark)

    Marpani, Fauziah Binti; Pinelo, Manuel; Meyer, Anne S.

    2017-01-01

    the reaction warrants innovative development. There is a particular need for development of i) better enzymes; ii) improved understanding of enzyme structure function aspects of reverse catalysis by dehydrogenases, iii) quantitative kinetic models of the enzymatic cascade reaction during simultaneous cofactor......A designed biocatalytic cascade system based on reverse enzymatic catalysis by formate dehydrogenase (EC 1.2.1.2), formaldehyde dehydrogenase (EC 1.2.1.46), and alcohol dehydrogenase (EC 1.1.1.1) can convert carbon dioxide (CO2) to methanol (CH3OH) via formation of formic acid (CHOOH......) and formaldehyde (CHOH) during equimolar cofactor oxidation of NADH to NAD+. This reaction is appealing because it represents a double gain: (1) reduction of CO2 and (2) an alternative to fossil fuel based production of CH3OH. The present review evaluates the efficiency of different immobilized enzyme systems...

  8. Formaldehyde-releasers : relationship to formaldehyde contact allergy. Metalworking fluids and remainder. Part 1

    NARCIS (Netherlands)

    de Groot, A.C.; Le Coz, C.J.; Lensen, G.J.; Flyvholm, M.A.; Maibach, H.I.; Coenraads, P.J.

    2010-01-01

    This is the second part of a review article on formaldehyde-releasers used as durable press chemical finishes (DPCF) in textiles. The early finishes contained large amounts of free formaldehyde, which led to many cases of allergic contact dermatitis to clothes in the 1950s and 1960s. Currently, most

  9. Modeling Formaldehyde Emission in Comets

    Science.gov (United States)

    Disanti, M. A.; Reuter, D. C.; Bonev, B. P.; Mumma, M. J.; Villanueva, G. L.

    Modeling fluorescent emission from monomeric formaldehyde (H2CO) forms an integral part of our overall comprehensive program of measuring the volatile composition of comets through high-resolution (RP ~ 25,000) infrared spectroscopy using CSHELL at the IRTF and NIRSPEC at Keck II. The H2CO spectra contain lines from both the nu1 (symmetric CH2 stretch) and nu5 (asymmetric CH2 stretch) bands near 3.6 microns. We have acquired high-quality spectra of twelve Oort cloud comets, and at least six of these show clear emission from H2CO. We also detected H2CO with NIRSPEC in one Jupiter Family comet, 9P/Tempel 1, during Deep Impact observations. Our H2CO model, originally developed to interpret low-resolution spectra of comets Halley and Wilson (Reuter et al. 1989 Ap J 341:1045), predicts individual line intensities (g-factors) as a function of rotational temperature for approximately 1300 lines having energies up to approximately 400 cm^-1 above the ground state. Recently, it was validated through comparison with CSHELL spectra of C/2002 T7 (LINEAR), where newly developed analyses were applied to obtain robust determinations of both the rotational temperature and abundance of H2CO (DiSanti et al. 2006 Ap J 650:470). We are currently in the process of extending the model to higher rotational energy (i.e., higher rotational quantum number) in an attempt to improve the fit to high-J lines in our spectra of C/T7 and other comets. Results will be presented, and implications discussed.Modeling fluorescent emission from monomeric formaldehyde (H2CO) forms an integral part of our overall comprehensive program of measuring the volatile composition of comets through high-resolution (RP ~ 25,000) infrared spectroscopy using CSHELL at the IRTF and NIRSPEC at Keck II. The H2CO spectra contain lines from both the nu1 (symmetric CH2 stretch) and nu5 (asymmetric CH2 stretch) bands near 3.6 microns. We have acquired high-quality spectra of twelve Oort cloud comets, and at least six of

  10. Studies on lipoamide dehydrogenase

    NARCIS (Netherlands)

    Benen, J.A.E.

    1992-01-01

    At the onset of the investigations described in this thesis progress was being made on the elucidation of the crystal structure of the Azotobactervinelandii lipoamide dehydrogenase. Also the gene encoding this enzyme was cloned in our laboratory. By this, a

  11. Studies on lipoamide dehydrogenase

    NARCIS (Netherlands)

    Visser, J.

    1969-01-01

    Gel-filtration, ultracentrifugation and sucrose density gradient centrifugation demonstrated differences in physico-chemical properties of holoenzyme and apoenzyme of lipoamide dehydrogenase. The native apoenzyme has a mol.wt. of approx. 52,000 which is half that of the native holoenzyme. The

  12. Preparation, characterization and in vitro release study of a glutathione-dependent polymeric prodrug Cis-3-(9H-purin-6-ylthio)-acrylic acid-graft-carboxymethyl chitosan.

    Science.gov (United States)

    Gong, Xiao-Yu; Yin, Yi-Hua; Huang, Zhi-Jun; Lu, Bo; Xu, Pei-Hu; Zheng, Hua; Xiong, Fu-Liang; Xu, Hai-Xing; Xiong, Xiong; Gu, Xing-Bao

    2012-10-15

    In this work, an amphiphilic polymeric prodrug Cis-3-(9H-purin-6-ylthio)-acrylic acid-graft-carboxymethyl chitosan (PTA-g-CMCS) was designed and synthesized. In aqueous solution, this grafted polymer can self-assemble into spherical micelles with a size ranging from 104 to 285 nm and zeta potential ranging from -12.3 to -20.1 mV. For the release study, less than 24% of 6-Mercaptopurine (6-MP) was released from PTA-g-CMCS1 in the media containing 2 and 100 μM glutathione (GSH), whereas 37%, 54% and 75% of 6-MP was released from the media with GSH of 1, 2 and 10mM, respectively. Besides, pH and drug content of the polymeric prodrug only presented slight influence on the 6-MP release. MTT assay demonstrated that this system had higher inhibition ratio on HL-60 cells (human promyelocytic leukemia cells) in the presence of GSH and lower cytotoxicity on mouse fibroblast cell line (L929). Therefore, this nano-sized system is glutathione-dependent, and it can be employed as a potential carrier for the controlled release of 6-MP. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Teratogenic effect of formaldehyde in rabbits

    Directory of Open Access Journals (Sweden)

    A. A. Al–Saraj

    2009-01-01

    Full Text Available Thirty three pregnant rabbits were exposed to vapour of 10% formaldehyde (12 ppm throughout the gestation period to know its effect on newborns. The results showed no abortion or foetal mortality but there were some anomalies (23.8% among the newborns rabbits which includes: meromelia (6.8%, encephalocele (6.1%, Oligodactyly (4.1%, Umbilical hernia (3.4% and Short tail (3.4%; besides that small for date and decrease in the body weight of the newborns were also noticed. These findings suggest that formaldehyde is a teratogenic agent.

  14. Glutathione-Dependent Detoxification Processes in Astrocytes

    DEFF Research Database (Denmark)

    Dringen, Ralf; Brandmann, Maria; Hohnholt, Michaela C

    2015-01-01

    component in many of the astrocytic detoxification processes is the tripeptide glutathione (GSH) which serves as electron donor in the GSH peroxidase-catalyzed reduction of peroxides. In addition, GSH is substrate in the detoxification of xenobiotics and endogenous compounds by GSH-S-transferases which...... knowledge on the GSH metabolism of astrocytes with a special emphasis on GSH-dependent detoxification processes....

  15. Developing a Reference Material for Formaldehyde Emissions Testing; Final Report

    Science.gov (United States)

    Exposure to formaldehyde has been shown to produce broad and potentially severe adverse human health effects. With ubiquitous formaldehyde sources in the indoor environment, formaldehyde concentrations in indoor air are usually higher than outdoors, ranging from 10 to 4000 μg/m3....

  16. Conversion and toxicity characteristics of formaldehyde in acetoclastic methanogenic sludge

    NARCIS (Netherlands)

    Gonzalez-Gil, G.; Kleerebezem, R.; Lettinga, G.

    2002-01-01

    An unadapted mixed methanogenic sludge transformed formaldehyde into methanol and formate. The methanol to formate ratio obtained was 1:1. Formaldehyde conversion proceeded without any lag phase, suggesting the constitutive character of the formaldehyde conversion enzymes involved. Because the rate

  17. Problems associated with the use of urea-formaldehyde foam for residential insulation. Part I. The effects of temperature and humidity on formaldehyde release from urea-formaldehyde foam insulation

    Energy Technology Data Exchange (ETDEWEB)

    Long, K.R.; Pierson, D.A.; Brennan, S.T.; Frank, C.W.; Hahne, R.A.

    1979-09-01

    The study is concerned primarily with those properties related to formaldehyde and its application as an ingredient in urea-formaldehyde resins. In particular the effects of temperature and humidity on urea-formaldehyde foam are discussed.

  18. Continuous fluorescence determination of formaldehyde in air

    Czech Academy of Sciences Publication Activity Database

    Motyka, Kamil; Mikuška, Pavel

    2004-01-01

    Roč. 518, 1-2 (2004), s. 51-57 ISSN 0003-2670 R&D Projects: GA AV ČR IAA4031105; GA ČR GA526/03/1182 Institutional research plan: CEZ:AV0Z4031919 Keywords : fluorescence * wet denuder * formaldehyde Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 2.588, year: 2004

  19. Edible carbohydrates from formaldehyde in a spacecraft

    Science.gov (United States)

    Weiss, A. H.

    1975-01-01

    The autocatalytic nature of the base catalyzed condensation of formaldehyde to formose sugars is eliminated by using as a cocatalyst, an aldose, or ketose having an alpha-hydrogen. This is more strongly complexed by base than is formaldehyde and the cocatalyst and sugar products accumulate as catalyst complexes instead of formaldehyde. Because of the presence of alpha-hydrogen atoms in cocatalysts and formose sugars, their removal by cross Cannizzaro reaction of complexed sugars does not occur, so the formose reaction behaves autocatalytically due to this accumulation. It is believed that a given catalytic formose complex is not a discrete complexed sugar, but rather, a scrambled dynamic mixture of sugars having weakened structures. The sugar complexes derive from a common salt-like formaldehyde complex, which, because of the absence of alpha-hydrogen, has a greater tendency to undergo Cannizzaro reaction, rather than formose condensation. Because of this, the Cannizzaro reaction can proceed without measurable formose condensation. The reverse is not possible.

  20. MODELING AND SIMULATION OF INDUSTRIAL FORMALDEHYDE ABSORBERS

    NARCIS (Netherlands)

    WINKELMAN, JGM; SIJBRING, H; BEENACKERS, AACM; DEVRIES, ET

    1992-01-01

    The industrially important process of formaldehyde absorption in water constitutes a case of multicomponent mass transfer with multiple reactions and considerable heat effects. A stable solution algorithm is developed to simulate the performance of industrial absorbers for this process using a

  1. Electrospinning formaldehyde cross-linked zein solutions

    Science.gov (United States)

    In order to develop zein fibers with improved physical properties and solvent resistance, formaldehyde was used as the cross-linking reagent before spinning. The cross-linking reaction was carried out in either acetic acid or ethanolic-HCl where the amount of cross-linking reagent was between 1 and...

  2. Identification of formaldehyde-responsive genes by suppression subtractive hybridization

    International Nuclear Information System (INIS)

    Lee, Min-Ho; Kim, Young-Ae; Na, Tae-Young; Kim, Sung-Hye; Shin, Young Kee; Lee, Byung-Hoon; Shin, Ho-Sang; Lee, Mi-Ock

    2008-01-01

    Formaldehyde is frequently used in indoor household and occupational environments. Inhalation of formaldehyde invokes an inflammatory response, including a variety of allergic signs and symptoms. Therefore, formaldehyde has been considered as the most prevalent cause of sick building syndrome, which has become a major social problem, especially in developing urban areas. Further formaldehyde is classified as a genotoxicant in the respiratory tract of rats and humans. To better understand the molecular mechanisms involved in formaldehyde intoxication, we sought differentially regulated genes by formaldehyde exposure to Hs 680.Tr human trachea cells, using polymerase chain reaction (PCR)-based suppression subtractive hybridization. We identified 27 different formaldehyde-inducible genes, including those coding for the major histocompatibility complex, class IA, calcyclin, glutathione S-transferase pi, mouse double minute 2 (MDM2), platelet-derived growth factor receptor alpha, and which are known to be associated with cell proliferation and differentiation, immunity and inflammation, and detoxification. Induction of these genes by formaldehyde treatment was confirmed by reverse transcription PCR and western blot analysis. Further, the expression of calcyclin, glutathione S-transferase pi, PDGFRA and MDM2 were significantly induced in the tracheal epithelium of Sprague Dawley rats after formaldehyde inhalation. Our results suggest that the elevated levels of these genes may be associated with the formaldehyde-induced toxicity, and that they deserve evaluation as potential biomarkers for formaldehyde intoxication

  3. Comparative Enactment of Formaldehyde-free and Formaldehyde-based Cross-linkers on Cotton Woven Fabrics

    Directory of Open Access Journals (Sweden)

    Nawshin Farzana

    2017-04-01

    Full Text Available The performances of formaldehyde-based and non-formaldehyde cross-linkers on pretreated cotton woven fabric were assessed and compared in this research. Fixapret CL was considered as the formaldehyde-based resin and Fixapret NF as the formaldehyde-free resin. Dry cross-linking method was adopted for the application of cross-linkers. Different properties of resin treated fabrics investigated and compared were as follows: DP (durable press rating, wrinkle recovery, stiff ness, tensile strength, tear strength, shrinkage, skewness, hydrophobicity, whiteness and yellowness index. Marginally low performances in smoothness appearance and dimensional stability on fabric were exhibited with formaldehyde-free cross-linkers although indicating lower amount of the strength loss percentage. The formaldehyde-based compounds imparted more yellowing tendency to the treated fabric. The formaldehyde-free resins may be a good choice of replacements considering the overall eff ectiveness on fabric

  4. Skincare products containing low concentrations of formaldehyde detected by the chromotropic acid method cannot be safely used in formaldehyde-allergic patients.

    Science.gov (United States)

    Hauksson, I; Pontén, A; Gruvberger, B; Isaksson, M; Engfeldt, M; Bruze, M

    2016-02-01

    Formaldehyde is a well-known contact sensitizer. Formaldehyde releasers are widely used preservatives in skincare products. It has been found that formaldehyde at concentrations allowed by the European Cosmetics Directive can cause allergic contact dermatitis. However, we still lack information on whether formaldehyde at low concentrations affects dermatitis in formaldehyde-allergic individuals. To study the effects of low concentrations of formaldehyde on irritant contact dermatitis in formaldehyde-allergic individuals. Fifteen formaldehyde-allergic individuals and a control group of 12 individuals without contact allergy to formaldehyde and formaldehyde releasers were included in the study. The individuals performed the repeated open application test (ROAT) during 4 weeks with four different moisturizers releasing formaldehyde in concentrations that had been determined as > 40, 20-40, 2·5-10 and 0 p.p.m. by the chromotropic acid (CA) spot test. Dimethyloldimethylhydantoin was used as a formaldehyde releaser in the moisturizers. The ROAT was performed on areas of experimentally induced sodium lauryl sulfate dermatitis. The study was double blind, controlled and randomized. Nine of the 15 formaldehyde-allergic individuals had reappearance or worsening of dermatitis on the areas that were treated with moisturizers containing formaldehyde. No such reactions were observed in the control group (P formaldehyde in the formaldehyde-allergic individuals (P formaldehyde often found in skincare products by the CA method are sufficient to worsen an existing dermatitis in formaldehyde-allergic individuals. © 2015 British Association of Dermatologists.

  5. Investigation on formaldehyde release from preservatives in cosmetics.

    Science.gov (United States)

    Lv, C; Hou, J; Xie, W; Cheng, H

    2015-10-01

    To understand formaldehyde residue in cosmetics, an investigation on formaldehyde release from eight preservatives (methenamine - MA, paraformaldehyde - PF, poly(p-toluenesulfonamide-co-formaldehyde) -PTSAF, quaternium-15 - QU, imidazolidinyl urea - IU, diazolidinyl urea - DU, dimethyloldimethyl hydantoin - DMDM and bronopol - BP) under various conditions was performed. The concentration of released formaldehyde was determined by high-performance liquid chromatography with photodiode array detection after derivatization with 2,4-dinitrophenylhydrazine. The amounts of formaldehyde release were in the order of PF > DU > DMDM ≈ QU ≈ IU > MA > BP > PTSAF. The releasing amounts of formaldehyde were the highest in the presence of aqueous matrices for the releasers except QU and IU, and the releasing effect was also relative to pH. More formaldehyde was released with longer storage time and higher temperature. Furthermore, all preservatives in cosmetic matrices released fewer amounts of formaldehyde than in pure aqueous or organic matrices, and the formaldehyde-releasing amounts were also cosmetic specific. Formaldehyde release was dependent on the matrix, pH, time and mainly temperature, and the releasing effect was also cosmetic specific. © 2015 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  6. Effectiveness of various methods of formaldehyde neutralization using monoethanolamine.

    Science.gov (United States)

    Coskey, Andrew; Gest, Thomas R

    2015-05-01

    Formaldehyde is the most commonly used fixative chemical for the preservation of human cadavers used for educational purposes in the United States. Formaldehyde is also a known carcinogenic agent whose exposure level is regulated by guidelines of the Occupational Safety and Health Administration. Various methods for formaldehyde neutralization exist, yet many donations programs do not take any steps to neutralize the formaldehyde in embalmed donor bodies. The effectiveness of monoethanolamine (MEA) in neutralizing formaldehyde is well documented when used as a final injection during embalming. The purpose of this study is to report the effectiveness of several post-embalming techniques of formaldehyde neutralization. Twenty-four donor bodies were assigned to four experimental groups of six. For the three experimental groups, the techniques tested involve delivery of a 20:1 dilution of deionized water:MEA via recannulization and gravity flow infusion, compartment injection, and alternate wetting solution containing four percent MEA. Our results indicated that spray bottle delivery was not effective in neutralization of formaldehyde compared to the control group, but that formaldehyde levels decreased when recannulization or compartment injection were used. The most effective method of formaldehyde neutralization was compartment injection of MEA solution (P embalming, compartment injection of MEA solution is an effective method of formaldehyde neutralization. © 2015 Wiley Periodicals, Inc.

  7. The microcapsule-type formaldehyde scavenger: the preparation and the application in urea-formaldehyde adhesives.

    Science.gov (United States)

    Duan, Hongyun; Qiu, Teng; Guo, Longhai; Ye, Jun; Li, Xiaoyu

    2015-08-15

    The limitation and regulation of formaldehyde emissions (FE) now shows great importance in wood-based materials such as plywood and particle board manufactured for building and furnishing materials. The widely used formaldehyde-based adhesives are one of the main sources of FE from the wood products. In this work, a new kind of long-term effective formaldehyde scavenger in the microcapsule form was prepared by using an intra-liquid desiccation method. The characterizations of the capsule (UC) were performed including the morphologies, the yields, the loading efficiency as well as its sustained-release of urea in aqueous conditions. The prepared UC could be integrated in urea-formaldehyde resins by simply physical blending, and the mixtures were available to be applied as the adhesives for the manufacture of plywood. The bonding strength (BS) and the FE of the bonded plywood in both short (3h) and long (12 week) period were evaluated in detail. It was found that the FE profile of the plywood behaved following a duple exponential law within 12 week. The addition of UC in the adhesive can effectively depress the FE of the plywood not only in a short period after preparation but also in a long-term period during its practical application. The slow released urea would continuously suppress the emission of toxic formaldehyde in a sustained manner without obviously deteriorating on the BS of the adhesives. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Afgivelse af formaldehyd fra byggevarer og forbrugerprodukter

    DEFF Research Database (Denmark)

    Kolarik, Barbara; Gunnarsen, Lars; Funch, Llis Winther

    Rapporten præsenterer resultatet af en undersøgelse af formaldehydafgivelse fra 22 mulige kilder i indeklimaet. Undersøgelsen er gennemført for om muligt at finde årsagen til de høje koncentrationer af formaldehyd i indeluften, der blev fundet i enkelte danske boliger under en foregående undersøg......Rapporten præsenterer resultatet af en undersøgelse af formaldehydafgivelse fra 22 mulige kilder i indeklimaet. Undersøgelsen er gennemført for om muligt at finde årsagen til de høje koncentrationer af formaldehyd i indeluften, der blev fundet i enkelte danske boliger under en foregående...

  9. [Malate dehydrogenase and lactate dehydrogenase in trematodes and turbellarians].

    Science.gov (United States)

    Vykhrestiuk, N P; Burenina, E A; Iarygina, G V

    1986-01-01

    Studies have been made on the activity and properties of malate and lactate dehydrogenases from the cattle rumen trematodes Eurytrema pancreaticum, Calicophoron ijimai and the turbellarian Phagocata sibirica which has a common free-living ancestor with the trematodes. All the species studied have a highly active malate dehydrogenase, its activity in the reaction of reducing oxaloacetate being 6-14 times higher than in the reaction of malate oxidation. The affinity of malate dehydrogenase to oxaloacetate was found to be higher than that to malate. The activity of lactate dehydrogenase (reducing the pyruvate) was lower than the activity of malate dehydrogenase, the difference being 50 times for C. ijimai, 4 times for E. pancreaticum and 10 times for P. sibirica.

  10. A rapid liquid chromatography determination of free formaldehyde in cod.

    Science.gov (United States)

    Storey, Joseph M; Andersen, Wendy C; Heise, Andrea; Turnipseed, Sherri B; Lohne, Jack; Thomas, Terri; Madson, Mark

    2015-01-01

    A rapid method for the determination of free formaldehyde in cod is described. It uses a simple water extraction of formaldehyde which is then derivatised with 2,4-dinitrophenylhydrazine (DNPH) to form a sensitive and specific chromophore for high-performance liquid chromatography (HPLC) detection. Although this formaldehyde derivative has been widely used in past tissue analysis, this paper describes an improved derivatisation procedure. The formation of the DNPH formaldehyde derivative has been shortened to 2 min and a stabilising buffer has been added to the derivative to increase its stability. The average recovery of free formaldehyde in spiked cod was 63% with an RSD of 15% over the range of 25-200 mg kg(-1) (n = 48). The HPLC procedure described here was also compared to a commercial qualitative procedure - a swab test for the determination of free formaldehyde in fish. Several positive samples were compared by both methods.

  11. Problems associated with the use of urea-formaldehyde foam for residential insulation. Part II. The effects of temperature and humidity on free formaldehyde, extractable formaldehyde, formaldehyde emission, and physical characteristics of the foam

    Energy Technology Data Exchange (ETDEWEB)

    Schutte, W.C.; Cole, R.S.; Frank, C.W.; Long, K.R.

    1981-02-01

    Results of testing with two products of urea-formaldehyde based foams are described. Results of three products have previously been reported. Methods for detection and quantitative determination of formaldehyde, design of the experimental chambers, and the procedures are described. Samples of Product D were monitored for about 29 days and samples of Product E were monitored for 60 days in chambers and results are tabulated for formaldehyde emission. Additional tests performed on the two products are: extractable formaldehyde (high and low temperature conditions); free formaldehyde (high and low temperature conditions); comparison of free formaldehyde concentration; density (high and low temperature conditions); shrinkage (high and low temperature conditions). Control panels were constructed to simulate a wall in a home and observations were made and compared with results of the experimental products.

  12. Genetics Home Reference: lactate dehydrogenase deficiency

    Science.gov (United States)

    ... this condition: lactate dehydrogenase-A deficiency (sometimes called glycogen storage disease XI) and lactate dehydrogenase-B deficiency. People with ... Resources Genetic Testing (2 links) Genetic Testing Registry: Glycogen storage disease XI Genetic Testing Registry: Lactate dehydrogenase B deficiency ...

  13. Formaldehyde scavengers function as novel antigen retrieval agents

    Science.gov (United States)

    Vollert, Craig T.; Moree, Wilna J.; Gregory, Steven; Bark, Steven J.; Eriksen, Jason L.

    2015-01-01

    Antigen retrieval agents improve the detection of formaldehyde-fixed proteins, but how they work is not well understood. We demonstrate that formaldehyde scavenging represents a key characteristic associated with effective antigen retrieval; under controlled temperature and pH conditions, scavenging improves the typical antigen retrieval process through reversal of formaldehyde-protein adduct formation. This approach provides a rational framework for the identification and development of more effective antigen retrieval agents. PMID:26612041

  14. BLM protein mitigates formaldehyde-induced genomic instability.

    Science.gov (United States)

    Kumari, Anuradha; Owen, Nichole; Juarez, Eleonora; McCullough, Amanda K

    2015-04-01

    Formaldehyde is a reactive aldehyde that has been classified as a class I human carcinogen by the International Agency for Cancer Research. There are growing concerns over the possible adverse health effects related to the occupational and environmental human exposures to formaldehyde. Although formaldehyde-induced DNA and protein adducts have been identified, the genomic instability mechanisms and the cellular tolerance pathways associated with formaldehyde exposure are not fully characterized. This study specifically examines the role of a genome stability protein, Bloom (BLM) in limiting formaldehyde-induced cellular and genetic abnormalities. Here, we show that in the absence of BLM protein, formaldehyde-treated cells exhibited increased cellular sensitivity, an immediate cell cycle arrest, and an accumulation of chromosome radial structures. In addition, live-cell imaging experiments demonstrated that formaldehyde-treated cells are dependent on BLM for timely segregation of daughter cells. Both wild-type and BLM-deficient formaldehyde-treated cells showed an accumulation of 53BP1 and γH2AX foci indicative of DNA double-strand breaks (DSBs); however, relative to wild-type cells, the BLM-deficient cells exhibited delayed repair of formaldehyde-induced DSBs. In response to formaldehyde exposure, we observed co-localization of 53BP1 and BLM foci at the DSB repair site, where ATM-dependent accumulation of formaldehyde-induced BLM foci occurred after the recruitment of 53BP1. Together, these findings highlight the significance of functional interactions among ATM, 53BP1, and BLM proteins as responders associated with the repair and tolerance mechanisms induced by formaldehyde. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. PILOT STUDY OF CONTACT SENSITIZATION OF FORMALDEHYDE-RELEASERS, FORMALDEHYDE AND GLUTARALDEHYDE IN DENTAL STUDENTS

    Directory of Open Access Journals (Sweden)

    Lyapina Maya

    2016-03-01

    Full Text Available Introduction: Occupational allergic contact sensitization is common in dental personnel. Some of the most common occupational allergens in dental practice are some formaldehyde-releasers, formaldehyde and glutaraldehyde. Aim: The aim of the present study was to evaluate the rate of contact sensitization to formaldehyde, quaternium-15, imidazolidinyl urea, diazolidinyl urea, and to glutaraldehyde in students of dental medicine and dental patients. Material and methods: A total of 50 participants were included in the study: 40 students of dental medicine exposed to formaldehyde-releasers, formaldehyde and glutaraldehyde during the course of their education; 10 dental patients without occupational exposure to the latter substances served as a control group. All of them were patch-tested with the studied allergens. Results: The sensitization rate to formaldehyde was significantly higher in the group of dental patients if compared to the one of dental students (χ2=5.37; p=0.021. Positive skin patch test reactions to quaternium-15 and to imidazolidinyl urea were observed only in the group of dental students. A significantly higher rate of sensitization to diazolidinyl urea, if compared to the one to imidazolidinyl urea (χ2=5.4; p=0.02 and to quaternium-15 (χ2=6.76; p=0.009, as well as to glutaraldehyde, if compared to the one to quaternium-15 (χ2=3.96; p=0.04 for the whole studied population was established. For the whole studied population, significantly increased rate of concomitant sensitization to formaldehyde and glutaraldehyde (χ2=6.18 p=0.013, as well as to diazolidinyl urea and to glutaraldehyde was established (χ2=9.12 p=0.003. Conclusions: We consider the importance of exposure to diazolidinyl urea, quaternium-15, imidazolidinyl urea and glutaraldehyde during the course of practical education in dentistry for the onset of sensitization. The exposure to formaldehyde is ubiquitous and is difficult to distinguish the roles of

  16. Degradation of formaldehyde in anaerobic sequencing batch biofilm reactor (ASBBR)

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, N.S. [Laboratorio de Processos Biologicos (LPB), Departamento de Hidraulica e Saneamento, Escola de Engenharia de Sao Carlos (EESC), Universidade de Sao Paulo - USP, Engenharia Ambiental, Bloco 4-F, Av. Joao Dagnone, 1100 Santa Angelina, 13.563-120 Sao Carlos, SP (Brazil); Zaiat, M. [Laboratorio de Processos Biologicos (LPB), Departamento de Hidraulica e Saneamento, Escola de Engenharia de Sao Carlos (EESC), Universidade de Sao Paulo - USP, Engenharia Ambiental, Bloco 4-F, Av. Joao Dagnone, 1100 Santa Angelina, 13.563-120 Sao Carlos, SP (Brazil)], E-mail: zaiat@sc.usp.br

    2009-04-30

    The present study evaluated the degradation of formaldehyde in a bench-scale anaerobic sequencing batch reactor, which contained biomass immobilized in polyurethane foam matrices. The reactor was operated for 212 days at 35 deg. C with 8 h sequential cycles, under different affluent formaldehyde concentrations ranging from 31.6 to 1104.4 mg/L (formaldehyde loading rates from 0.08 to 2.78 kg/m{sup 3} day). The results indicate excellent reactor stability and over 99% efficiency in formaldehyde removal, with average effluent formaldehyde concentration of 3.6 {+-} 1.7 mg/L. Formaldehyde degradation rates increased from 204.9 to 698.3 mg/L h as the initial concentration of formaldehyde was increased from around 100 to around 1100 mg/L. However, accumulation of organic matter was observed in the effluent (chemical oxygen demand (COD) values above 500 mg/L) due to the presence of non-degraded organic acids, especially acetic and propionic acids. This observation poses an important question regarding the anaerobic route of formaldehyde degradation, which might differ substantially from that reported in the literature. The anaerobic degradation pathway can be associated with the formation of long-chain oligomers from formaldehyde. Such long- or short-chain polymers are probably the precursors of organic acid formation by means of acidogenic anaerobic microorganisms.

  17. Generation of constant formaldehyde levels for inhalation studies.

    Science.gov (United States)

    Balmat, J L

    1985-11-01

    Development of the described formaldehyde generator was undertaken to provide researchers engaged in inhalation studies with the capability to produce constant and controllable levels of formaldehyde in air. Depolymerization of purified paraformaldehyde under rigorously controlled conditions in a modified Freeland calibration manifold is employed. The desired formaldehyde concentration in the exposure chamber is achieved by adding an appropriate fraction of the generator effluent to the normal air supply to the chamber. Variation in generator formaldehyde concentration is less than +/- 11% over a three-day period and less than +/- 2% over short periods (36 seconds).

  18. Formaldehyde Crosslinking: A Tool for the Study of Chromatin Complexes*

    Science.gov (United States)

    Hoffman, Elizabeth A.; Frey, Brian L.; Smith, Lloyd M.; Auble, David T.

    2015-01-01

    Formaldehyde has been used for decades to probe macromolecular structure and function and to trap complexes, cells, and tissues for further analysis. Formaldehyde crosslinking is routinely employed for detection and quantification of protein-DNA interactions, interactions between chromatin proteins, and interactions between distal segments of the chromatin fiber. Despite widespread use and a rich biochemical literature, important aspects of formaldehyde behavior in cells have not been well described. Here, we highlight features of formaldehyde chemistry relevant to its use in analyses of chromatin complexes, focusing on how its properties may influence studies of chromatin structure and function. PMID:26354429

  19. Formaldehyde crosslinking: a tool for the study of chromatin complexes.

    Science.gov (United States)

    Hoffman, Elizabeth A; Frey, Brian L; Smith, Lloyd M; Auble, David T

    2015-10-30

    Formaldehyde has been used for decades to probe macromolecular structure and function and to trap complexes, cells, and tissues for further analysis. Formaldehyde crosslinking is routinely employed for detection and quantification of protein-DNA interactions, interactions between chromatin proteins, and interactions between distal segments of the chromatin fiber. Despite widespread use and a rich biochemical literature, important aspects of formaldehyde behavior in cells have not been well described. Here, we highlight features of formaldehyde chemistry relevant to its use in analyses of chromatin complexes, focusing on how its properties may influence studies of chromatin structure and function. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

  20. 78 FR 51695 - Formaldehyde Emissions Standards for Composite Wood Products; Extension of Comment Period

    Science.gov (United States)

    2013-08-21

    ... AGENCY 40 CFR Part 770 RIN 2070-AJ92 Formaldehyde Emissions Standards for Composite Wood Products..., concerning formaldehyde emissions standards for composite wood products. After receiving requests for an... CFR Part 770 Environmental protection, Formaldehyde, Reporting and recordkeeping requirements, Toxic...

  1. Formaldehyde and LeukemiA: Epidemiology, Potential Mechanisms and Implications for Risk Assessment

    Science.gov (United States)

    Formaldehyde is widely used in the United States and other countries. Occupational and environmental exposures to formaldehyde may be associated with an increased risk of leukemia in exposed individuals. However, risk assessment of formaldehyde and leukemia has been challenging ...

  2. Low density, resorcinol-formaldehyde aerogels

    Science.gov (United States)

    Pekala, R.W.

    1988-05-26

    The polycondensation of resorcinol with formaldehyde under alkaline conditions results in the formation of surface functionalized polymer ''clusters''. The covalent crosslinking of these ''clusters'' produces gels which when processed under supercritical conditions, produce low density, organic aerogels (density less than or equal to100 mg/cc; cell size less than or equal to0.1 microns). The aerogels are transparent,dark red in color and consist of interconnected colloidal-like particles with diameters of about 100 A/degree/. These aerogels may be further carbonized to form low density carbon foams with cell size of about 0.1 micron. 1 fig., 1 tab.

  3. Concentrations of formaldehyde in rain waters harvested at the ...

    African Journals Online (AJOL)

    Formaldehyde has been recognized as one of the most important pollutants and a carcinogen that is present in the air, water, foods, soils, fabrics, cosmetics, cigarette smoke and treated wood. Related health effects and hazards are linked to formaldehyde, depending on mode of exposure which includes: weakness, ...

  4. [Effect of formaldehyde inhalation on allergic rhinitis in mice].

    Science.gov (United States)

    Xiang, Rong; Xu, Yu

    2015-08-01

    To observe the effect of formaldehyde inhalation on the allergic rhinitis mice model. Forty-eight male BALB/C mice in six experimental group were exposure to (A) saline control; (B) Der p1; (C) formaldehyde (3.0 mg/m3); (D) Derp1 + formaldehyde (1.5 mg/m3); (E) Der p1 + formaldehyde (3.0 mg/M3); (F) Der p1+ formaldehyde (6.0 mg/m3). The concentrations of IL-4, IL-10 and IFN-γ in the peripheral serum were measured by enzyme-linked immunosorbent assay(ELISA). Nasal mucosal inflammation was evaluated by HE staining. Result: Formaldehyde exposure could increase the number of allergic rhinitis mice with sneezing and rubbing nose. The levels of IL-4 and IL-10 in group B, D, E and F were higher than that ingroup A (P formaldehyde exposure allergic rhinitis groups. The study showed that formaldehyde exposure can promote Th2 cytokines and eosinophil infiltration and then aggravate the allergic rhinitis symptoms.

  5. Influence of indoor formaldehyde pollution on respiratory system ...

    African Journals Online (AJOL)

    Background The decoration of interior spaces can lead to dangerous levels of indoor formaldehyde pollution. Exposure to indoor air pollution may be responsible for nearly 2 million deaths per year in developing countries. Objectives To assess the prevalence of indoor formaldehyde pollution caused by decoration and ...

  6. Formaldehyde condensation products of model phenols for conifer bark tannins

    Science.gov (United States)

    Richard W. Hemingway; Gerald W. McGraw

    1978-01-01

    Gel permeation chromatography of the condensation products of phenols and formaldehyde proved effective in understanding the reactions of condensed tannins with formaldehyde. Rates of condensation of phloroglucinols, resorcinols, catechols, (+)catechins, and (-)epicatechin were examined to determine if methylol-tannins from southern pine bark could be prepared as resin...

  7. Vitality Improvement of the Mediterranean Fruit Fly, Ceratitis capitata Wied 1- Measured by using dehydrogenase Enzyme Activities

    International Nuclear Information System (INIS)

    Salama, M.S.; Shoman, A.A.; Elbermawy, S.M.; Abul Yazid, I.

    2000-01-01

    The present study searches for the improvement vitality of the Mediterranean fruit fly, Ceratitis capitata Wied. Through the induction of a specific variance (mutation) in the genetic material. Several types of treatments that were thought to cause this mutation were used, as IGR's, temperature, formaldehyde, colchicine, alcohols, several types of larval rearing media and gamma-rays. Generally, the activities of the energy enzymes alpha-glycerophosphate dehydrogenase (alpha-GPDH) enzyme lactate dehydrogenase (LDH) enzyme and malate dehydrogenase (MDH) enzyme, when used as a direct measure for the fly vitality, increased due to treatments of the egg stage by the previously mentioned treatments specially by the usage of rice hulls in the larval rearing medium alone or followed by irradiation of the pupal stage with 90 Gy

  8. Unusual formaldehyde-induced hypersensitivity in two schoolgirls

    Energy Technology Data Exchange (ETDEWEB)

    Gammage, R.B. (Oak Ridge National Lab., TN (USA)); Hanna, W.T.; Painter, P.B. (Tennessee Univ., Knoxville, TN (USA))

    1990-01-01

    Two schoolgirls developed a syndrome resembling Henoch-Schonlein purpura while attending a recently opened school insulated with urea-formaldehyde foam (UFFI). Skin rashes and swellings were accompanied by bizarre, blue-green discoloration of the skin. Subsequent investigations by county, state and federal authorities, and low measured concentrations of formaldehyde, prompted initial conclusions that in-school formaldehyde exposures were not responsible for the girls' problems. Subsequent controlled exposures to UFFI and formaldehyde while in hospital elicited the whole cascade of symptoms. The chronology of the onset and amplification of systems make it probable that the formaldehyde exposures precipitating the girls' hypersensitivity, occurred in the school. 3 refs.

  9. Development of melamine modified urea formaldehyde resins based o nstrong acidic pH catalyzed urea formaldehyde polymer

    Science.gov (United States)

    Chung-Yun Hse

    2009-01-01

    To upgrade the performance of urea-formaldehyde (UF) resin bonded particleboards, melamine modified urea-formaldehyde (MUF) resins based on strong acidic pH catalyzed UF polymers were investigated. The study was conducted in a series of two experiments: 1) formulation of MUF resins based on a UF polymer catalyzed with strong acidic pH and 2) determination of the...

  10. Hardness evaluation of cured urea-formaldehyde resins with different formaldehyde/urea mole ratios using nanoindentation method

    Science.gov (United States)

    Byung-Dae Park; Charles R. Frihart; Yan Yu; Adya P. Singh

    2013-01-01

    To understand the influence of formaldehyde/urea (F/U) mole ratio on the properties of urea–formaldehyde (UF) resins, this study investigated hardness of cured UF resins with different F/U mole ratios using a nanoindentation method. The traditional Brinell hardness (HB) method was also used...

  11. Initial Measurements of Radiocarbon In Atmospheric Formaldehyde at Narragansett, RI

    Science.gov (United States)

    Shen, H.; Heikes, B. G.; Xu, L.; McNichol, A. P.; Olson, J. R.

    2008-12-01

    Formaldehyde is an intermediate in the atmospheric oxidation of nearly every volatile organic compound (VOC) and is important to odd-hydrogen radicals and ozone chemistry. It is directly observed from space and its distributions are used to constrain biogenic emissions of VOCs, specifically isoprene. The relative contribution of fossil VOCs and biogenic VOCs to formaldehyde, to isoprene emission estimates and subsequently to ozone and oxidant chemistry is expected to vary seasonally and spatially due to VOC speciation, emission patterns, and reactivity. The radiocarbon, 14C, content of formaldehyde is useful in assessing the relative contributions of fossil and biogenic VOC groups to formaldehyde. We report a compound specific radiocarbon analysis (CSRA) method for formaldehyde based upon gaseous formaldehyde collection, derivatization to thiazolidine, preparative capillary gas chromatography separation, and AMS analysis. Ambient measurements from Narragansett, RI, made in winter and summer 2007 are presented. On 11 of 13 samples, we find 80 to >95% of the collected formaldehyde is of fossil origin and, contrary to our initial hypothesis, we see no seasonal shift in proportion. The remaining 2 samples, one each from winter and summer, are 30-40% biogenic carbon. The measurements are interpreted considering fossil-biogenic source attribution and local transport conditions and contrasted with prior measurements from Nova Scotia. Further, CSRA measurement of acetaldehyde is feasible with the method.

  12. Histone redistribution and conformational effect on chromatin induced by formaldehyde.

    Science.gov (United States)

    Polacow, I; Cabasso, L; Li, H J

    1976-10-19

    Histone redistributions between endogenous DNA in calf thymus chromatin and exogenous DNA from Clostridium perfringens (69% A + T) or from Micrococcus luteus (30% A + T) induced by 0.6 M NaCl or by 2% formaldehyde were studied by thermal denaturation. The observed redistribution occurred on histone Hl when the exogenous DNA was (A + T)-richer than the DNA in chromatin, and when the mixture was exposed to 0.6 M NaCl or formaldehyde. When a (G + C)-richer DNA was added as the acceptor for histones, no substantial transfer of histones from chromatin DNA to exogenous DNA was found. Thus the activation energy of histone dissociation from chromatin DNA seems to be substantially lowered by 0.6 M NaCl or formaldehyde such that histones (mostly histone Hl) can be dissociated and bind the (A + T)-richer DNA and form a more stable complex. It is suggested that the formaldehyde effect on histones may be due to the loss of positive charges on lysine and arginin residues (probably more on lysine than on arginine) in histones after their rapid reaction with formaldehyde. Formaldehyde treatment of chromatin also distorts the DNA conformation, as revealed by circular dichroism (CD) studies. This structural effect occurs mainly on those base pairs bound by histones other than Hl, or within the chromatin subunit. Histone redistribution is treated as a thermodynamic phenomenon of histone binding to DNA. The validity of using formaldehyde to study chromatin structure is discussed.

  13. 40 CFR 80.56 - Measurement methods for formaldehyde and acetaldehyde.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Measurement methods for formaldehyde... Measurement methods for formaldehyde and acetaldehyde. (a) Formaldehyde and acetaldehyde will be measured by....140 of this chapter for formaldehyde analysis. Diluted exhaust sample volumes must be at least 15 L...

  14. Formaldehyde: a candidate toxic air contaminant. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Frye, B.; Parker, T.

    1988-03-01

    Formaldehyde (HCHO) is a gas widely used in adhesives and resins, textiles, embalming fluids, fungicides, air fresheners, and cosmetics. It is directly emitted into the ambient outdoor air from vehicular and stationary sources, and is also produced in the atmosphere from other substances by photochemical smog processes. The International Agency for Research on Cancer (IARC) has determined that there is sufficient evidence for carcinogenicity of formaldehyde to animals, and limited evidence for carcinogenicity to humans. EPA classifies formaldehyde as a probable human carcinogen with a one in a million risk concentration of 0.08 ppb.

  15. Expression and characterization of a class III alcohol dehydrogenase gene from Gluconobacter frateurii in the presence of methanol during glyceric acid production from glycerol.

    Science.gov (United States)

    Sato, Shun; Morita, Naoki; Kitamoto, Dai; Habe, Hiroshi

    2013-01-01

    Some acetic acid bacteria have been shown to produce large amounts of glyceric acid (GA) from glycerol, which is a by-product of biodiesel fuel (BDF) production. Previously, a Gluconobacter strain was found that produced decreased amounts of GA from glycerol in the presence of methanol, a major ingredient of raw glycerol derived from the BDF industry. Thus, a comparative transcriptome analysis of Gluconobacter frateurii NBRC103465 was performed to investigate changes in gene expression during GA production from glycerol in the presence of methanol. Cells grown with methanol showed upregulated expression of a class III alcohol dehydrogenase homolog (adhC(Gf)) and decreased GA production. adhC(Gf) was cloned and expressed heterologously in Escherichia coli, and the presence of an additional protein with an approximate molecular mass of 39 kDa in the cytosol of the recombinant E. coli cells was identified by SDS-PAGE. Activity measurements of the cytosol revealed that the translational product of adhC(Gf) exhibited formaldehyde dehydrogenase activity in the presence of nicotinamide adenine dinucleotide and glutathione. Gluconobacter frateurii cells grown in 1% methanol-containing glycerol were found to have fivefold higher formaldehyde dehydrogenase activity than cells grown without methanol, suggesting that adhC(Gf) in G. frateurii cells functions in the dissimilation of methanol-derived formaldehyde.

  16. Formaldehyde Profiler Using Laser Induced Fluorescence Technique, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Formaldehyde (HCHO) is of great interest to atmospheric scientists in NASA and other research institutions. In this SBIR project, we propose to build an airborne or...

  17. Status of iodine in formaldehyde-preserved milk - revisited

    International Nuclear Information System (INIS)

    Montgomery, D.M.; Gibson, J.E.

    1977-01-01

    The results of an investigation into the effect of formaldehyde preservation of raw milk in view of the differences observed by Murthy (J. Dairy Sci.; 45:1066 (1962) and J. Dairy Sci.; 49:1190 (1966)) and Thomas (personal communication. (1976)) are reported. The use of the specific electrode method for iodine analysis of formaldehyde-preserved milk has also been investigated. It was found that the Thomas preservation technique for 4 litre milk samples for 131 I analysis was acceptable, and an aliquot of the formaldehyde-preserved milk can be analyzed for total iodide concentration by the electrode method. Milk samples may also be preserved for stable iodide measurement (without iodide carrier addition) by addition of formaldehyde at 0.5 M concentration. (U.K.)

  18. Formaldehyde Surface Distributions and Variability in the Mexico City Basin

    Science.gov (United States)

    Junkermann, W.; Mohr, C.; Steinbrecher, R.; Ruiz Suarez, L.

    2007-05-01

    Formaldehyde ambient air mole fractions were measured throughout the dry season in March at three different locations in the Mexico City basin. The continuously running instruments were operated at Tenago del Aire, a site located in the Chalco valley in the southern venting area of the basin, at the Intituto Mexicano del Petroleo (IMP) in the northern part of the city and about 30 km north of the city at the campus of the Universidad Tecnològica de Tecamac (UTTEC). The technique used is the Hantzsch technology with a time resolution of 2 minutes and a detection limit of 100 ppt. Daily maxima peaked at 35 ppb formaldehyde in the city and about 15 to 20 ppb at the other sites. During night formaldehyde levels dropped to about 5 ppb or less. It is evident that the observed spatial and temporal variability in near surface formaldehyde distributions is strongly affected by local and regional advection processes.

  19. Formaldehyde cross-linking and structural proteomics: Bridging the gap.

    Science.gov (United States)

    Srinivasa, Savita; Ding, Xuan; Kast, Juergen

    2015-11-01

    Proteins are dynamic entities constantly moving and altering their structures based on their functions and interactions inside and outside the cell. Formaldehyde cross-linking combined with mass spectrometry can accurately capture interactions of these rapidly changing biomolecules while maintaining their physiological surroundings. Even with its numerous established uses in biology and compatibility with mass spectrometry, formaldehyde has not yet been applied in structural proteomics. However, formaldehyde cross-linking is moving toward analyzing tertiary structure, which conventional cross-linkers have already accomplished. The purpose of this review is to describe the potential of formaldehyde cross-linking in structural proteomics by highlighting its applications, characteristics and current status in the field. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Formaldehyde Profiler Using Laser Induced Fluorescence Technique Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Formaldehyde (HCHO) is a key trace species that is of great interest to atmospheric scientists in NASA and other research institutions. In this SBIR project, we...

  1. IRIS Toxicological Review of Formaldehyde (Inhalation) (External Review Draft 2010)

    Science.gov (United States)

    UPDATE EPA is currently revising its Integrated Risk Information System (IRIS) assessment of formaldehyde to address the 2011 NAS peer review recommendations. This assessment addresses both noncancer and cancer human health effects that are relevant to assessing ...

  2. Low-Power Formaldehyde Detector for Space Applications, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Trace contamination of the International Space Station (ISS) by formaldehyde -- a known carcinogen -- is a significant threat to crew health. The spacecraft maximum...

  3. Low-power formaldehyde detector for space applications, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Trace contamination of the International Space Station (ISS) by formaldehyde?a known carcinogen? is a significant potential threat to crew health. The spacecraft...

  4. 24 CFR 3280.309 - Health Notice on formaldehyde emissions.

    Science.gov (United States)

    2010-04-01

    ... reported as a result of formaldehyde exposure. Elderly persons and young children, as well as anyone with a history of asthma, allergies, or lung problems, may be at greater risk. Research is continuing on the...

  5. Association between formaldehyde exposure and miscarriage in Chinese women.

    Science.gov (United States)

    Xu, Wenjing; Zhang, Weiqiang; Zhang, Xuezhen; Dong, Taowei; Zeng, Huiqian; Fan, Qiyun

    2017-06-01

    The aim of this study was to assess whether higher plasma formaldehyde concentration existed in women diagnosed with miscarriage and whether it contributed to higher risk of miscarriage in Chinese women.A case-control study was conducted in 118 women with a diagnosed miscarriage at the first trimester and 191 healthy women who delivered at term. Plasma levels of formaldehyde were measured by gas chromatography in conjunction with mass spectrometry after derivatization of the formaldehyde to the pentafluorophenylhydrazone and characteristics of the subjects including age, education level, occupation, family income, home decoration status, and exposure to second-hand smoke were recorded. Logistic regression analyses were performed to investigate the relationship between miscarriage and levels of formaldehyde.Women with miscarriage were comparable to controls in terms of age, education level, occupation, family income, and home decoration status. They were, however, more likely to be exposed to second-hand smoke. Plasma levels of formaldehyde were significantly higher in women with miscarriage (0.0944 ± 0.0105 vs. 0.0239 ± 0.0032 μg/mL, P formaldehyde (odds ratio [OR]: 8.06, 95% confidence interval [CI]: 4.96-13.09) and exposure to second-hand smoke (OR: 3.60, 95% CI: 1.58-8.20) were independently and significantly associated with higher risk of miscarriage.Plasma levels of formaldehyde were significantly higher in women who were diagnosed with miscarriage than those who delivered at term and higher levels of formaldehyde was an independent risk factor for miscarriage, with higher levels being associated with higher risk of miscarriage.

  6. Proposed residential indoor air quality guidelines for formaldehyde

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, N.

    2005-07-01

    This paper proposed a set of revised residential indoor air quality guidelines for formaldehyde. In the earlier guidelines, target and action levels were set at 60 {mu}g/m{sup 3} and 120 {mu}g/. However, epidemiological studies on the effects of chronic formaldehyde exposure have consistently found respiratory and allergic effects at levels below 123 {mu}g/m{sup 3}. Formaldehyde levels in home have been associated with increased risk of atopy and have also been associated with the hospitalization of children. Summaries of various epidemiological studies were presented. A summary of critical effects and the derivation of the guidelines was provided. Based on clinical studies and animal experiments, the primary effects of acute exposure to formaldehyde are the irritation of the mucosa of the upper respiratory tract and the eyes. The no observable adverse effects level (NOAEL) and lowest observable adverse effects level (LOAEL) for this outcome are 615 and 1,230 {mu}g/m{sup 3}. It was noted that an association between low-level exposure to formaldehyde and the development of allergic sensitization and asthma is biologically plausible as it is consistent with observations in animals. It was concluded that short-term exposure to formaldehyde should be limited to 123{mu}g/m{sup 3}. It was recommended that long term exposure to formaldehyde be limited to 50 {mu}g/m{sup 3}. Although formaldehyde is carcinogenic to humans, the cancer risk associated with lifelong exposure at the recommended levels is estimated to be negligible. 73 refs., 9 tabs.

  7. Injection Seeded Laser for Formaldehyde Differential Fluorescence Lidar

    Science.gov (United States)

    Schwemmer, G.; Yakshin, M.; Prasad, C.; Hanisco, T.; Mylapore, A. R.; Hwang, I. H.; Lee, S.

    2016-01-01

    We describe the design and development of an injection seeded Nd:YVO4 laser for use in a differential fluorescence lidar for measuring atmospheric formaldehyde profiles. A high repetition rate Q-switched laser is modified to accept injection seed input to spectrally narrow and tune the output. The third harmonic output is used to excite formaldehyde (HCHO) fluorescence when tuned to a HCHO absorption line. Spectral confirmation is made with the use of a photoacoustic cell and grating spectrometer.

  8. Genetics Home Reference: dihydropyrimidine dehydrogenase deficiency

    Science.gov (United States)

    ... 5-fluorouracil and capecitabine. These drugs are not broken down efficiently by people with dihydropyrimidine dehydrogenase deficiency ... of this enzyme. Because fluoropyrimidine drugs are also broken down by the dihydropyrimidine dehydrogenase enzyme, deficiency of ...

  9. Primary Formation Path of Formaldehyde in Hydrothermal Vents

    Science.gov (United States)

    Inaba, Satoshi

    2018-03-01

    Formaldehyde is abundant in the universe and one of the fundamental molecules for life. Hydrothermal vents produce a substantial amount of hydrogen molecules by serpentinization and promote reductive reactions of single carbon compounds. The abundance of formaldehyde is expected to be low due to the high Gibbs free energy in hydrothermal vents. We consider two competing formation pathways of formaldehyde: (1) the reduction of CO by H2 and (2) the reduction of HCOOH by H2 to form a methanediol, followed by the dehydration of the methanediol. We performed a number of quantum chemical simulations to examine the formation of formaldehyde in the gas phase as well as in aqueous solution. The energy barrier is significantly reduced by the catalytic effect of water molecules in aqueous solution and becomes lowest when a water cluster consisted of 5 water molecules catalyzes the reduction. The energy barrier to form a methanediol by the reduction of HCOOH is lower by 17.5 kcal/mol than that to form a formaldehyde by the reduction of CO. Considering the low energy barrier to dehydrate methanediol, the primary pathway to form formaldehyde in hydrothermal vents is concluded to be the reduction of HCOOH by H2, followed by the dehydration of methanediol.

  10. Genotoxicity of formaldehyde: Molecular basis of DNA damage and mutation

    Directory of Open Access Journals (Sweden)

    Masanobu eKawanishi

    2014-09-01

    Full Text Available Formaldehyde is commonly used in the chemical industry and is present in the environment, such as vehicle emissions, some building materials, food and tobacco smoke. It also occurs as a natural product in most organisms, the sources of which include a number of metabolic processes. It causes various acute and chronic adverse effects in humans if they inhale its fumes. Among the chronic effects on human health, we summarize data on genotoxicity and carcinogenicity in this review, and we particularly focus on the molecular mechanisms involved in the formaldehyde mutagenesis. Formaldehyde mainly induces N-hydroxymethyl mono-adducts on guanine, adenine and cytosine, and N-methylene crosslinks between adjacent purines in DNA. These crosslinks are types of DNA damage potentially fatal for cell survival if they are not removed by the nucleotide excision repair pathway. In the previous studies, we showed evidence that formaldehyde causes intra-strand crosslinks between purines in DNA using a unique method (Matsuda et al. Nucleic Acids Res. 26, 1769-1774,1998. Using shuttle vector plasmids, we also showed that formaldehyde as well as acetaldehyde induces tandem base substitutions, mainly at 5’-GG and 5’-GA sequences, which would arise from the intra-strand crosslinks. These mutation features are different from those of other aldehydes such as crotonaldehyde, acrolein, glyoxal and methylglyoxal. These findings provide molecular clues to improve our understanding of the genotoxicity and carcinogenicity of formaldehyde.

  11. Formaldehyde Levels in Traditional and Portable Classrooms: A Pilot Investigation.

    Science.gov (United States)

    Ribeiro, Isabela C; Kowalski, Peter J; Callahan, David B; Noonan, Gary P; Moffett, Daphne B; Olson, David R; Malilay, Josephine

    2016-03-01

    The pilot study discussed in this article assessed formaldehyde levels in portable classrooms (PCs) and traditional classrooms the authors evaluated formaldehyde levels in day and overnight indoor air (TCs) and explored factors influencing indoor air quality (e.g., carbon dioxide, temperature, and relative humidity). In a cross-sectional design, samples from nine PCs renovated within three years previously and three TCs in a school district in metropolitan Atlanta, Georgia. Formaldehyde levels ranged from 0.0068 to 0.038 parts per million (ppm). In both types of classroom, overnight formaldehyde median levels (PCs = 0.018 ppm; TCs = 0.019 ppm) were higher than day formaldehyde median levels (PCs = 0.011 ppm; TCs = 0.016 ppm). Carbon dioxide levels measured 470-790 ppm at 7:00 a.m. and 470-1800 ppm at 4:00 p.m. Afternoon medians were higher in TCs (1,400 ppm) than in PCs (780 ppm). Consistent with previous studies, formaldehyde levels were similar among PCs and TCs. Reducing carbon dioxide levels by improving ventilation is recommended for classrooms.

  12. Aging-associated excess formaldehyde leads to spatial memory deficits

    Science.gov (United States)

    Tong, Zhiqian; Han, Chanshuai; Luo, Wenhong; Li, Hui; Luo, Hongjun; Qiang, Min; Su, Tao; Wu, Beibei; Liu, Ying; Yang, Xu; Wan, You; Cui, Dehua; He, Rongqiao

    2013-01-01

    Recent studies show that formaldehyde participates in DNA demethylation/methylation cycle. Emerging evidence identifies that neuronal activity induces global DNA demethylation and re-methylation; and DNA methylation is a critical step for memory formation. These data suggest that endogenous formaldehyde may intrinsically link learning-responsive DNA methylation status and memory formation. Here, we report that during spatial memory formation process, spatial training induces an initial global DNA demethylation and subsequent re-methylation associated with hippocampal formaldehyde elevation then decline to baseline level in Sprague Dawley rats. Scavenging this elevated formaldehyde by formaldehyde-degrading enzyme (FDH), or enhancing DNA demethylation by a DNA demethylating agent, both led to spatial memory deficits by blocking DNA re-methylation in rats. Furthermore, we found that the normal adult rats intrahippocampally injected with excess formaldehyde can imitate the aged-related spatial memory deficits and global DNA methylation decline. These findings indicate that aging-associated excess formaldheyde contributes to cognitive decline during aging. PMID:23657727

  13. Health risks from indoor formaldehyde exposures in northwest weatherized residences

    Energy Technology Data Exchange (ETDEWEB)

    Mellinger, P.J.; Sever, L.E.

    1986-10-01

    Conflicting opinions on the potential hazards associated with formaldehyde exposure triggered a national workshop to address the toxicological questions concerning the health effects of formaldehyde. Since quantitative human data are not available to derive a dose-response curve for formaldehyde risk assessment, nonhuman data are used. In the case of formaldehyde, data from animals exposed to high concentrations are used to estimate human risk at much lower concentrations. This study presents the several steps that make up a risk assessment and examines any additional data that might alter significantly the risk estimates presented in the 1984 EIS. Rat inhalation chronic bioassay data from a study sponsored by the Chemical Industry Institute of Toxicology (CIIT) have been used to develop a risk equation that was subsequently used by BPA in its EIS. The CIIT data base remains the only acceptable animal data that can support the estimation of a dose-response curve. The development of mathematical models continues with a great deal of energy, and the use of different models is largely responsible for the great variability of the formaldehyde risk estimates. While one can calculate different values for carcinogenic risk associated with formaldehyde exposure than were presented earlier in the BPA EIS, they are not likely to be any better.

  14. Formaldehyde in dentistry: a review of mutagenic and carcinogenic potential

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, B.B.; Chestner, S.B.

    1981-09-01

    For many years there has been controversy over the value of antimicrobial drugs for intracanal dressings in endodontics. Formocresol, a formaldehyde compound, has evolved as the preferred drug for routine endodontic procedures, as well as pediatric endodontics. The increase in the use of formaldehyde has been complicated by the introduction of paraformaldehyde pastes for filling root canals. Neither of these formulas has ever been standardized. The doses are arbitrary, and the common dose of formocresol has been shown to be many times greater than the minimum dose needed for effect. The efficacy of paraformaldehyde pastes is questionable and remains clouded by inconclusive evidence, conflicting research, inadequate terminology, and a lack of convincing statistical evidence. The clinical use and delivery of formocresol and paraformaldehyde pastes remain arbitrary and unscientific. Formaldehyde has a known toxic mutagenic and carcinogenic potential. Many investigations have been conducted to measure the risk of exposure to formaldehyde; it is clear that formaldehyde poses a carcinogenic risk in humans. There is a need to reevaluate the rationale underlying the use of formaldehyde in dentistry particularly in light of its deleterious effects.

  15. Formaldehyde-releasers in cosmetics : relationship to formaldehyde contact allergy Part 1. Characterization, frequency and relevance of sensitization, and frequency of use in cosmetics

    NARCIS (Netherlands)

    de Groot, Anton C.; White, Ian R.; Flyvholm, Mari-Ann; Lensen, Gerda; Coenraads, Pieter-Jan

    2010-01-01

    In this part of a series of review articles on formaldehyde-releasers and their relationship to formaldehyde contact allergy, formaldehyde-releasers in cosmetics are discussed. In this first part of the article, key data are presented including frequency of sensitization and of their use in

  16. Formaldehyde emissions from ULEF- and NAF-bonded commercial hardwood plywood as influenced by temperature and relative humidity

    Science.gov (United States)

    Charles R. Frihart; James M. Wescott; Michael J. Birkeland; Kyle M. Gonner

    2010-01-01

    It is well documented in the literature that temperature and humidity can influence formaldehyde emissions from composite panels that are produced using urea-formaldehyde (UF) adhesives. This work investigates the effect of temperature and humidity on newer, ultra-low emitting formaldehyde urea formaldehyde (ULEF-UF) and no-added formaldehyde (NAF) adhesives. A...

  17. Volatile organic compound and formaldehyde emissions from Populus davidiana wood treated with low molecular weight urea-formaldehyde resin.

    Science.gov (United States)

    Wang, Jing-Xian; Shen, Jun; Lei, Cheng-Shuai; Feng, Qi

    2014-09-01

    Populus davidiana wood was usually impregnated with low molecular weight thermosetting resins to improve its physical and mechanical properties. However, volatile organic compounds (VOCs) and formaldehyde emitted from treated wood have lead to poor indoor air quality (IAQ). The trends of VOC and formaldehyde emissions as a function of the weight percent gain (WPG) factor were mainly investigated in this work. Aldehydes and alkanes were the predominant compositions indentified in the VOC emissions, although low amount of ketones, terpenes and alcohols were also found. With the increase in WPG, VOC and formaldehyde concentrations improved. However, their concentration began to decrease when WPG was over 44.06% (VOC) and 36.35% (formaldehyde), respectively. The modulus of elasticity (MOE) of untreated and treated wood at different WPG levels was detected. It showed that treatment of wood with UF resin significantly improved the mechanical properties. Therefore, it is probably helpful to comprehensively analyze correlations among environmental performance, mechanical performance and processing costs.

  18. A review of the effects of formaldehyde release from endodontic materials.

    Science.gov (United States)

    Athanassiadis, B; George, G A; Abbott, P V; Wash, L J

    2015-09-01

    Formaldehyde is present in most living cells and the environment. In dentistry, patients may be exposed to formaldehyde through the use of several endodontic materials (e.g. AH 26) and during formocresol pulpotomies. This review outlines how the human body reacts to formaldehyde exposure, how recent data has relooked at the issue of carcinogenicity and leukaemia associated with formaldehyde, and whether it is possible to quantify the amount of formaldehyde produced by endodontic cements. The review analyses the way formaldehyde is produced from epoxy resins and addresses the question of whether the amount of formaldehyde from endodontic cements is large enough to override the body's ability to deal with its own endogenous levels of formaldehyde and should the amount of formaldehyde produced be a concern. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  19. THE PHOTODISSOCIATION OF FORMALDEHYDE IN COMETS

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, Paul D., E-mail: pfeldman@jhu.edu [Department of Physics and Astronomy, The Johns Hopkins University, 3400 N. Charles Street, Baltimore, MD 21218 (United States)

    2015-10-20

    Observations of comets in the 905–1180 Å spectral band made with the Far Ultraviolet Spectroscopic Explorer in 2001 and 2004 show unusual features in the fluorescent emissions of CO and H{sub 2}. These include emission from a non-thermal high-J rotational population of CO and solar Lyα induced fluorescence from excited vibrational levels of H{sub 2}, both of which are attributed to the photodissociation of formaldehyde. In this paper we model the large number of observed H{sub 2} lines and demonstrate the dependence of the pumping on the heliocentric velocity of the comet and the solar line profiles. We also derive the rotational and vibrational populations of H{sub 2} and show that they are consistent with the results of laboratory studies of the photodissociation of H{sub 2}CO. In addition to the principal series of H i and O i, the residual spectrum is found to consist mainly of the Rydberg series of C i multiplets from which we derive the mean carbon column abundance in the coma. Fluorescent emissions from N i and N{sub 2} are also searched for.

  20. Indoor air quality: radon and formaldehyde

    International Nuclear Information System (INIS)

    1986-01-01

    The WHO Regional Office for Europe has taken a leading role at the international level in reviewing and stimulating research and action on the potential health hazards of indoor air pollutants. A subject is given on page vi. It is now much more generally recognized than even five years ago that the use of particular materials for construction of buildings or for furniture and fittings is accompanied by certain risks, especially in view of the ''tightening'' of buildings to reduce energy costs, and increased reliance on central heating and air conditioning. For the last three years, the Regional Office, with the support of the Government of the Netherlands, has been developing a set of air quality guidelines for Europe. In addition to major air pollutants such as sulfur dioxide and particulates, these guidelines cover some 25 other inorganic and organic substances, including radon and formaldehyde. In 1985, a working group reviewed the latter two substances in relation to the ongoing indoor air quality programme of the Regional Office and also as part of the air quality guidelines. In view of the importance of these substances, it was decided to issue a separate report in the Environmental Health Series. The complete air quality guidelines will be published in mid-1987. (author)

  1. Exposure to formaldehyde: a challenge of occupational health significance

    International Nuclear Information System (INIS)

    Kaonga, K.

    2009-01-01

    The use of formaldehyde as the fixative for general microscopic demonstration of tissues in medical laboratory establishments is as significant as the diagnosis of the underlying ailment. Instantaneous human exposure to formaldehyde elicits symptoms that may include watery eyes, headache, inflamed throat and dyspnea. The gaseous chemical is toxic, allergenic and carcinogenic. A study to determine the incidence of human exposure to formaldehyde was carried out at the University Teaching Hospital in Lusaka, Zambia from January to December, 2007. Anonymous questionnaires on various aspects of human exposure to formaldehyde were given to laboratory technical personnel. Exposure to formaldehyde was determined using general consideration model comprising points awarded to participants according to their responses. Five points represented the maximum level of exposure, while one point denoted the minimum encounter. There were 8 incidents of formaldehyde pollution, with five being emissions from 210-litre formalin receptacles whose stoppers were inadvertently left loose overnight, while three involved accidental breakage of Winchester bottles of formalin. A total of 115 people were exposed during the year. Fifteen (13.0 percent) participants scored one point each, while 20 (17.4 percent) participants obtained 2 points each. Thirty-five (30.4 percent) participants got 3 points each, while 30 (26.0 percent) participants received 4 points each. Twenty-five (21.7 percent) participants attained 5 points each. Human exposure to formaldehyde is an issue of occupational health concern. Participants with a score of 3 points or more need regular medical check ups in order to safeguard their health. Programs on effective management of hazardous chemicals are worth setting up.(author)

  2. Mortality from lymphohematopoietic malignancies among workers in formaldehyde industries.

    Science.gov (United States)

    Hauptmann, Michael; Lubin, Jay H; Stewart, Patricia A; Hayes, Richard B; Blair, Aaron

    2003-11-05

    Many U.S. factory workers are exposed to formaldehyde. Although increased risks for leukemia have been found in medical workers and other professionals exposed to formaldehyde, studies in industrial workers, who are thought to have higher exposures, have shown inconsistent associations. We extended follow-up of a cohort of industrial workers to evaluate the association between formaldehyde exposure and lymphohematopoietic cancers. The cohort consisted of 25 619 workers (865 708 person-years) employed before January 1, 1966, at one of 10 U.S. industrial plants and followed through December 31, 1994. We analyzed formaldehyde exposure (peak exposure, average exposure intensity, cumulative exposure, and duration of exposure) and mortality from lymphohematopoietic malignancies using standardized mortality ratios and relative risks and 95% confidence intervals (CIs) based on Poisson regression. Statistical tests were two-sided. Among the cohort, there were 178 deaths from lymphohematopoietic malignancies. Relative risks for leukemia (69 deaths), particularly for myeloid leukemia (30 deaths), increased with formaldehyde exposure. Compared with workers exposed to low peak levels of formaldehyde (0.1-1.9 ppm), relative risks for myeloid leukemia were 2.43 (95% CI = 0.81 to 7.25) and 3.46 (95% CI = 1.27 to 9.43) for workers exposed to peak levels of 2.0-3.9 ppm and > or = 4.0 ppm, respectively (P(trend) =.009). Compared with workers exposed to low levels of average exposure intensity of formaldehyde (0.1-0.4 ppm), workers exposed to 0.5-0.9 ppm and > or = 1.0 ppm average intensity had relative risks of 1.15 (95% CI = 0.41 to 3.23) and 2.49 (95% CI = 1.03 to 6.03), respectively (P(trend) =.088). The relative risk for leukemia was not associated with cumulative exposure but was weakly associated with duration of exposure. Relative risks for Hodgkin's disease also increased with formaldehyde exposure. Exposure to formaldehyde may cause leukemia, particularly myeloid leukemia

  3. Mammals divert endogenous genotoxic formaldehyde into one-carbon metabolism.

    Science.gov (United States)

    Burgos-Barragan, Guillermo; Wit, Niek; Meiser, Johannes; Dingler, Felix A; Pietzke, Matthias; Mulderrig, Lee; Pontel, Lucas B; Rosado, Ivan V; Brewer, Thomas F; Cordell, Rebecca L; Monks, Paul S; Chang, Christopher J; Vazquez, Alexei; Patel, Ketan J

    2017-08-31

    The folate-driven one-carbon (1C) cycle is a fundamental metabolic hub in cells that enables the synthesis of nucleotides and amino acids and epigenetic modifications. This cycle might also release formaldehyde, a potent protein and DNA crosslinking agent that organisms produce in substantial quantities. Here we show that supplementation with tetrahydrofolate, the essential cofactor of this cycle, and other oxidation-prone folate derivatives kills human, mouse and chicken cells that cannot detoxify formaldehyde or that lack DNA crosslink repair. Notably, formaldehyde is generated from oxidative decomposition of the folate backbone. Furthermore, we find that formaldehyde detoxification in human cells generates formate, and thereby promotes nucleotide synthesis. This supply of 1C units is sufficient to sustain the growth of cells that are unable to use serine, which is the predominant source of 1C units. These findings identify an unexpected source of formaldehyde and, more generally, indicate that the detoxification of this ubiquitous endogenous genotoxin creates a benign 1C unit that can sustain essential metabolism.

  4. Formaldehyde as a basis for residential ventilation rates

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, M.H.; Hodgson, A.T.

    2002-04-28

    Traditionally, houses in the U.S. have been ventilated by passive infiltration in combination with active window opening. However in recent years, the construction quality of residential building envelopes has been improved to reduce infiltration, and the use of windows for ventilation also may have decreased due to a number of factors. Thus, there has been increased interest in engineered ventilation systems for residences. The amount of ventilation provided by an engineered system should be set to protect occupants from unhealthy or objectionable exposures to indoor pollutants, while minimizing energy costs for conditioning incoming air. Determining the correct ventilation rate is a complex task, as there are numerous pollutants of potential concern, each having poorly characterized emission rates, and poorly defined acceptable levels of exposure. One ubiquitous pollutant in residences is formaldehyde. The sources of formaldehyde in new houses are reasonably understood, and there is a large body of literature on human health effects. This report examines the use of formaldehyde as a means of determining ventilation rates and uses existing data on emission rates of formaldehyde in new houses to derive recommended levels. Based on current, widely accepted concentration guidelines for formaldehyde, the minimum and guideline ventilation rates for most new houses are 0.28 and 0.5 air changes per hour, respectively.

  5. The Antioxidant Cofactor Alpha-Lipoic Acid May Control Endogenous Formaldehyde Metabolism in Mammals

    Directory of Open Access Journals (Sweden)

    Anastasia V. Shindyapina

    2017-12-01

    Full Text Available The healthy human body contains small amounts of metabolic formaldehyde (FA that mainly results from methanol oxidation by pectin methylesterase, which is active in a vegetable diet and in the gastrointestinal microbiome. With age, the ability to maintain a low level of FA decreases, which increases the risk of Alzheimer's disease and dementia. It has been shown that 1,2-dithiolane-3-pentanoic acid or alpha lipoic acid (ALA, a naturally occurring dithiol and antioxidant cofactor of mitochondrial α-ketoacid dehydrogenases, increases glutathione (GSH content and FA metabolism by mitochondrial aldehyde dehydrogenase 2 (ALDH2 thus manifests a therapeutic potential beyond its antioxidant property. We suggested that ALA can contribute to a decrease in the FA content of mammals by acting on ALDH2 expression. To test this assumption, we administered ALA in mice in order to examine the effect on FA metabolism and collected blood samples for the measurement of FA. Our data revealed that ALA efficiently eliminated FA in mice. Without affecting the specific activity of FA-metabolizing enzymes (ADH1, ALDH2, and ADH5, ALA increased the GSH content in the brain and up-regulated the expression of the FA-metabolizing ALDH2 gene in the brain, particularly in the hippocampus, but did not impact its expression in the liver in vivo or in rat liver isolated from the rest of the body. After ALA administration in mice and in accordance with the increased content of brain ALDH2 mRNA, we detected increased ALDH2 activity in brain homogenates. We hypothesized that the beneficial effects of ALA on patients with Alzheimer's disease may be associated with accelerated ALDH2-mediated FA detoxification and clearance.

  6. XoxF Is Required for Expression of Methanol Dehydrogenase in Methylobacterium extorquens AM1 ▿

    Science.gov (United States)

    Skovran, Elizabeth; Palmer, Alexander D.; Rountree, Austin M.; Good, Nathan M.; Lidstrom, Mary E.

    2011-01-01

    In Gram-negative methylotrophic bacteria, the first step in methylotrophic growth is the oxidation of methanol to formaldehyde in the periplasm by methanol dehydrogenase. In most organisms studied to date, this enzyme consists of the MxaF and MxaI proteins, which make up the large and small subunits of this heterotetrameric enzyme. The Methylobacterium extorquens AM1 genome contains two homologs of MxaF, XoxF1 and XoxF2, which are ∼50% identical to MxaF and ∼90% identical to each other. It was previously reported that xoxF is not required for methanol growth in M. extorquens AM1, but here we show that when both xoxF homologs are absent, strains are unable to grow in methanol medium and lack methanol dehydrogenase activity. We demonstrate that these defects result from the loss of gene expression from the mxa promoter and suggest that XoxF is part of a complex regulatory cascade involving the 2-component systems MxcQE and MxbDM, which are required for the expression of the methanol dehydrogenase genes. PMID:21873495

  7. FORMALDEHYDE GAS INACTIVATION OF BACILLUS ANTHRACIS, BACILLUS SUBTILIS AND GEOBACILLUS STEAROTHERMOPHILUS SPORES ON INDOOR SURFACE MATERIALS.

    Science.gov (United States)

    Research evaluated the decontamination of Bacillus anthracis, Bacillus subtilis, and Geobacillus stearothermophilus spores on indoor surface material using formaldehyde gas. Spores were dried on seven types of indoor surfaces and exposed to 1100 ppm formaldehyde gas for 10 hr. Fo...

  8. Melamine–Glyoxal–Glutaraldehyde Wood Panel Adhesives without Formaldehyde

    Directory of Open Access Journals (Sweden)

    Xuedong Xi

    2017-12-01

    Full Text Available (MGG’ resin adhesives for bonding wood panels were prepared by a single step procedure, namely reacting melamine with glyoxal and simultaneously with a much smaller proportion of glutaraldehyde. No formaldehyde was used. The inherent slow hardening of this resin was overcome by the addition of N-methyl-2-pyrrolidone hydrogen sulphate ionic liquid as the adhesive hardener in the glue mix. The plywood strength results obtained were comparable with those obtained with melamine–formaldehyde resins pressed under the same conditions. Matrix assisted laser desorption ionisation time of flight (MALDI ToF and Fourier transform Infrared (FTIR analysis allowed the identification of the main oligomer species obtained and of the different types of linkages formed, as well as to indicate the multifaceted role of the ionic liquid. These resins are proposed as a suitable substitute for equivalent formaldehyde-based resins.

  9. The margin of exposure to formaldehyde in alcoholic beverages.

    Science.gov (United States)

    Monakhova, Yulia B; Jendral, Julien A; Lachenmeier, Dirk W

    2012-06-01

    Formaldehyde has been classified as carcinogenic to humans (WHO IARC group 1). It causes leukaemia and nasopharyngeal cancer, and was described to regularly occur in alcoholic beverages. However, its risk associated with consumption of alcohol has not been systematically studied, so this study will provide the first risk assessment of formaldehyde for consumers of alcoholic beverages.Human dietary intake of formaldehyde via alcoholic beverages in the European Union was estimated based on WHO alcohol consumption data and literature on formaldehyde contents of different beverage groups (beer, wine, spirits, and unrecorded alcohol). The risk assessment was conducted using the margin of exposure (MOE) approach with benchmark doses (BMD) for 10 % effect obtained from dose-response modelling of animal experiments.For tumours in male rats, a BMD of 30 mg kg(-1) body weight per day and a "BMD lower confidence limit" (BMDL) of 23 mg kg(-1) d(-1) were calculated from available long-term animal experiments. The average human exposure to formaldehyde from alcoholic beverages was estimated at 8·10(-5) mg kg(-1) d(-1). Comparing the human exposure with BMDL, the resulting MOE was above 200,000 for average scenarios. Even in the worst-case scenarios, the MOE was never below 10,000, which is considered to be the threshold for public health concerns.The risk assessment shows that the cancer risk from formaldehyde to the alcohol-consuming population is negligible and the priority for risk management (e.g. to reduce the contamination) is very low. The major risk in alcoholic beverages derives from ethanol and acetaldehyde.

  10. Preliminary study: Formaldehyde exposure in laboratories of Sharjah university in UAE

    OpenAIRE

    Ahmed, Hafiz Omer

    2011-01-01

    Objectives : Laboratory technicians, students, and instructors are at high risk, because they deal with chemicals including formaldehyde. Thus, this preliminary study was conducted to measure the concentration of formaldehyde in the laboratories of the University of Sharjah in UAE. Materials and Methods: Thirty-two air samples were collected and analyzed for formaldehyde using National Institute for Occupational Safety and Health (NIOSH) method 3500. In this method, formaldehyde reacts with c...

  11. Preparation and characterization of phloroglucinol-formaldehyde aerogel

    International Nuclear Information System (INIS)

    Huang Changgang; China Academy of Engineering Physics, Mianyang; Tang Yongjian; Wang Chaoyang; Yan Hongmei

    2006-01-01

    Phloroglucinol-formaldehyde (PF) aerogels and carbonized PF (CPF) aerogels were prepared from Phloroglucinol (P) and Formaldehyde (F) by sol-gel, solvent exchanging, supercritical drying and carbonization processes. The aerogel has a large specific surface area, continuous nano-network and porous structure. The density and mean porosity radius will enlarge after being carbonized, while the specific surface area will be influenced little. The micro-structure and density of aerogel are controlled by concentration of total reactants and catalyzer, respectively. Aerogels with different micro-structure and different density fit for ICF targets can be prepared by optimizing synthesis conditions. (authors)

  12. [Cognitive disorders in workers engaged into formaldehyde and methanol production].

    Science.gov (United States)

    Maliutina, N N; Taranenko, L A

    2014-01-01

    The authors studied cognitive functions state in workers engaged into chemical production under exposure to combination of factors with prevalent methanol and formaldehyde. Study covered 128 examinees of main occupations and 89 individuals of reference group. Through periodic medical examinations, state of cognitive functions was assessed by Montreal scale (MCA). Findings are increased serum levels of methanol and formaldehyde in the main group members. Moderate cognitive disorders of multifunctional type were seen. Associations of these disorders with acting agents were studied, and high degree of their correlations with occupation was revealed.

  13. Injection Seeded Laser for Formaldehyde Differential Fluorescence Lidar

    Directory of Open Access Journals (Sweden)

    Schwemmer G.

    2016-01-01

    Full Text Available We describe the design and development of an injection seeded Nd:YVO4 laser for use in a differential fluorescence lidar for measuring atmospheric formaldehyde profiles. A high repetition rate Q-switched laser is modified to accept injection seed input to spectrally narrow and tune the output. The third harmonic output is used to excite formaldehyde (HCHO fluorescence when tuned to a HCHO absorption line. Spectral confirmation is made with the use of a photoacoustic cell and grating spectrometer.

  14. Separation of long RNA by agarose-formaldehyde gel electrophoresis.

    Science.gov (United States)

    Mansour, Farrah H; Pestov, Dimitri G

    2013-10-01

    We describe a method to facilitate electrophoretic separation of high-molecular-weight RNA species, such as ribosomal RNAs and their precursors, on agarose-formaldehyde gels. Two alternative "pK-matched" buffer systems were substituted for the traditionally used Mops-based conductive medium. The key advantages include shortened run times, a 5-fold reduction in formaldehyde concentration, a significantly improved resolution of long RNAs, and consistency in separation. The new procedure has a streamlined work flow that helps to minimize errors and is broadly applicable to agarose gel electrophoresis of RNA samples and their subsequent analysis by Northern blotting. Copyright © 2013 Elsevier Inc. All rights reserved.

  15. Synthesis and thermal degradation studies of melamine formaldehyde resins.

    Science.gov (United States)

    Ullah, Sami; Bustam, M A; Nadeem, M; Naz, M Y; Tan, W L; Shariff, A M

    2014-01-01

    Melamine formaldehyde (MF) resins have been synthesized at different reaction temperature and pH values. Different molar ratios of melamine and formaldehyde were used to synthesize the corresponding resins. The prepared resin samples were characterized by using molecular weight determination viscometry and thermogravimetric analysis (TGA). The maximum percentage of solid content (69.7%) was obtained at pH 8.5 and 75°C temperature. The molecular weight of MF resin was increased with an increase of melamine monomer concentration. The highest residual weight 14.125 wt.% was obtained with sample 10.

  16. Synthesis and Thermal Degradation Studies of Melamine Formaldehyde Resins

    Directory of Open Access Journals (Sweden)

    Sami Ullah

    2014-01-01

    Full Text Available Melamine formaldehyde (MF resins have been synthesized at different reaction temperature and pH values. Different molar ratios of melamine and formaldehyde were used to synthesize the corresponding resins. The prepared resin samples were characterized by using molecular weight determination viscometry and thermogravimetric analysis (TGA. The maximum percentage of solid content (69.7% was obtained at pH 8.5 and 75°C temperature. The molecular weight of MF resin was increased with an increase of melamine monomer concentration. The highest residual weight 14.125 wt.% was obtained with sample 10.

  17. Studies on the reaction of glutathione and formaldehyde using NMR.

    Science.gov (United States)

    Hopkinson, Richard J; Barlow, Philippa S; Schofield, Christopher J; Claridge, Timothy D W

    2010-11-07

    Within cells it is proposed that a major mechanism for the metabolism of formaldehyde is via its reaction with glutathione (GSH) to form S-hydroxymethylglutathione (HMG), which undergoes subsequent oxidation. In addition to HMG and the previously reported (5R,10S)-5-(carboxymethylcarbamoyl)-7-oxo-3-thia-1,6-diazabicyclo[4.4.1]undecane-10-carboxylic acid (BiGF(2)), NMR studies on the reaction of GSH with formaldehyde reveal two previously unassigned monocyclic structures. The results imply that the biologically relevant reactions between aldehydes and peptides/proteins may be more complex than presently perceived.

  18. Competitive inhibition of glutamate dehydrogenase reaction.

    Science.gov (United States)

    Choudhury, Rajarshi; Punekar, Narayan S

    2007-06-12

    Irrespective of their pyridine nucleotide specificity, all glutamate dehydrogenases share a common chemical mechanism that involves an enzyme bound 'iminoglutarate' intermediate. Three compounds, structurally related to this intermediate, were tested for the inhibition of purified NADP-glutamate dehydrogenases from two Aspergilli, as also the bovine liver NAD(P)-glutamate dehydrogenase. 2-Methyleneglutarate, closely resembling iminoglutarate, was a potent competitive inhibitor of the glutamate dehydrogenase reaction. This is the first report of a non-aromatic structure with a better glutamate dehydrogenase inhibitory potency than aryl carboxylic acids such as isophthalate. A suitably located 2-methylene group to mimic the iminium ion could be exploited to design inhibitors of other amino acid dehydrogenases.

  19. A study of formaldehyde sources in air

    Science.gov (United States)

    Shen, Haiwei

    Formaldehyde (CH2O) is a central component of photooxidation chemistry. The atmospheric sources of CH2O involve a complex mixture of biogenic and anthropogenic volatile organic compounds (VOCs). This study explores the geographical and altitudinal variations of CH2O production from its precursors over the Eastern U.S. and assesses the contributions from biogenic and anthropogenic VOC emissions to atmospheric CH2O. Measurements of airborne CH2O and hydrocarbons over North America and model results were used to evaluate CH2O production from its precursors. Source attribution results from a photochemical box model indicate 95% of the CH2O arose in various proportions from a mixture of methane, isoprene, methyl hydroperoxide, methanol, and a peroxyacetyl group. Methane on average contributed 32% at altitudes below 2 km to CH2O production, 43% in 2-6 km, and 52% in 6-12 km. It was the predominant CH 2O source in 1-12 km. Isoprene served as a major source of CH2 O (range 0-72%, average 17%) over the southeastern U.S. region within 0-1-km layer. Methyl hydroperoxide was one of the predominant contributors over the ocean and averaged from 6 to 33% in all layers. Production from the peroxyacetyl group and methanol were 7-17% and 10-14% on average in the layers in 0-12 km, respectively. A compound specific radiocarbon analysis technique was developed for atmospheric CH2O to examine its biogenic and anthropogenic carbon fraction. The method used filter collection, a preparative capillary gas chromatography isolation technique, and AMS detection. Ambient samples were collected on the roof of the CACS building at the Bay Campus of the University of RI, Narragansett, RI. The 14CH2O data, 48-hour back trajectories, and VOC observations from the RI Department of Environmental Management were used to assess the relative contributions of biogenic and fossil precursors to CH2O. The results show a large fraction of fossil/industrial carbon in collected CH2O samples and imply the

  20. Effect of formaldehyde on the upper respiratory tract _ormal flora of ...

    African Journals Online (AJOL)

    Background: Formaldehyde is a chemical that is used to fix a tissue after death or removal from the body to prevent autolysis and putrefaction. Exposure to formaldehyde can occur as a result of occupation. Objective: To determine the effect of the formaldehyde on the throat and nasal flora of upper respiratory tract of rabbits ...

  1. 40 CFR 721.3810 - Formaldehyde, polymers with substituted phenols (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, polymers with... New Uses for Specific Chemical Substances § 721.3810 Formaldehyde, polymers with substituted phenols... identified generically as Formaldehyde, polymers with substituted phenols (PMN P-99-0558) is subject to...

  2. How mole ratio of UF resin affects formaldehyde emission and other properties : a literature critique

    Science.gov (United States)

    George E. Myers

    1984-01-01

    A critical review was made of the literature concerned with how the formaldehyde to urea mole ratio (F/U) affects formaldehyde emission from particleboard and plywood bonded with urea-formaldehyde (UF) adhesives, and how this ratio affects certain other adhesive and board properties. It is difficult to quantify the dependence of various properties on mole ratio or...

  3. 40 CFR 721.3807 - Formaldehyde, polymer with phenol and 1,2,3-propanetriol, methylated.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, polymer with phenol and... Significant New Uses for Specific Chemical Substances § 721.3807 Formaldehyde, polymer with phenol and 1,2,3... chemical substance identified as formaldehyde, polymer with phenol and 1,2,3-propanetriol, methylated (PMN...

  4. 40 CFR 721.7046 - Formaldehyde, polymer with substituted phenols, glycidyl ether.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, polymer with substituted... New Uses for Specific Chemical Substances § 721.7046 Formaldehyde, polymer with substituted phenols... substance identified as formaldehyde, polymer with substituted phenols, glycidyl ether (PMN P-93-955) is...

  5. 75 FR 37792 - Formaldehyde Gas; Receipt of Application for Emergency Exemption, Solicitation of Public Comment

    Science.gov (United States)

    2010-06-30

    ... AGENCY Formaldehyde Gas; Receipt of Application for Emergency Exemption, Solicitation of Public Comment... (OSWER) to use formaldehyde gas (CAS No. 82115-62-6) to decontaminate non-food contact surfaces to... Administrator to issue a quarantine exemption for the use of formaldehyde gas on non-food contact surfaces to...

  6. 40 CFR 721.3805 - Formaldehyde, reaction products with 1,3-benzenedimethanamine and bisphenol A.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, reaction products with 1... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.3805 Formaldehyde, reaction products... to reporting. (1) The chemical substance identified as formaldehyde, reaction products with 1,3...

  7. 40 CFR 721.3800 - Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, condensated... Formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene oxide adduct. (a... generically as formaldehyde, condensated polyoxyethylene fatty acid, ester with styrenated phenol, ethylene...

  8. 40 CFR 721.10134 - Formaldehyde, polymer with dialkylphenylamine, dialkylphenol and trimethylhexanediamine (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, polymer with... CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10134 Formaldehyde, polymer... significant new uses subject to reporting. (1) The chemical substance identified generically as formaldehyde...

  9. 75 FR 17163 - Formaldehyde Standard; Extension of the Office of Management and Budget's (OMB) Approval of...

    Science.gov (United States)

    2010-04-05

    ... Occupational Safety and Health Administration Formaldehyde Standard; Extension of the Office of Management and... specified in the Standard on Formaldehyde (29 CFR 1910.1048). The standard protects workers from the adverse health effects from occupational exposure to Formaldehyde. DATES: Comments must be submitted (postmarked...

  10. 78 FR 44089 - Formaldehyde Emissions Standards for Composite Wood Products; Extension of Comment Period

    Science.gov (United States)

    2013-07-23

    ... AGENCY 40 CFR Part 770 RIN 2070-AJ92 Formaldehyde Emissions Standards for Composite Wood Products..., concerning formaldehyde emissions standards for composite wood products. This document extends the comment..., Formaldehyde, Reporting and recordkeeping requirements, Toxic substances, Wood. Dated: July 17, 2013. James...

  11. Relationship between formaldehyde and quaternium-15 contact allergy. Influence of strength of patch test reactions

    NARCIS (Netherlands)

    de Groot, Anton C.; Blok, Janine; Coenraads, Pieter-Jan

    2010-01-01

    Objectives: To test our hypothesis that patients with stronger patch test reactions to formaldehyde are more likely to react to quaternium-15, attesting to the aetiological role for formaldehyde in such co-reactivity. Methods: Retrospective analysis of all patients patch tested with formaldehyde and

  12. 40 CFR 721.9480 - Resorcinol, formaldehyde substituted carbomonocycle resin (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Resorcinol, formaldehyde substituted... New Uses for Specific Chemical Substances § 721.9480 Resorcinol, formaldehyde substituted... chemical substance identified generically as resorcinol, formaldehyde substituted carbomonocycle resin (PMN...

  13. Contact allergic dermatitis from melamine formaldehyde resins in a patient with a negative patch-test reaction to formaldehyde.

    Science.gov (United States)

    García Gavin, Juan; Loureiro Martinez, Manuel; Fernandez-Redondo, Virginia; Seoane, Maria-José; Toribio, Jaime

    2008-01-01

    Melamine paper is a basic material used in the furniture industry for home and office interiors. Contact allergic dermatitis from melamine formaldehyde resins (MFRs) should be considered in patients who work on melamine paper impregnation lines. We report a case of a 28-year-old female plywood worker who developed eczema on the dorsal side of her hands and wrists after 2 years of working on the melamine paper impregnation line. She had a relevant positive patch-test reaction to MFR, with a negative reaction to formaldehyde. Contact dermatitis due to MFR is not common, and it is usually related to products that are not fully cured or to close contact with intermediate products on the assembly line. Formaldehyde release from MFR can explain most of the positive responses. To our knowledge, this is the first report of MFR contact allergic dermatitis in a worker on a melamine paper impregnation line.

  14. Characterization of retinaldehyde dehydrogenase 3

    OpenAIRE

    Graham, Caroline E.; Brocklehurst, Keith; Pickersgill, Richard W.; Warren, Martin J.

    2006-01-01

    RALDH3 (retinal dehydrogenase 3) was characterized by kinetic and binding studies, protein engineering, homology modelling, ligand docking and electrostatic-potential calculations. The major recognition determinant of an RALDH3 substrate was shown to be an eight-carbon chain bonded to the aldehyde group whose kinetic influence (kcat/Km at pH 8.5) decreases when shortened or lengthened. Surprisingly, the β-ionone ring of all-trans-retinal is not a major recognition site. The dissociation const...

  15. levels of formaldehyde and acetaldehyde in selected bottled ...

    African Journals Online (AJOL)

    Accer

    ABSTRACT. The levels of formaldehyde and acetaldehyde in bottled drinking water and the effect of storage time and storage conditions on their levels were determined. A total of 144 samples of six brands of bottled drinking water were purchased from Dar es Salaam, Iringa, Mwanza and Arusha regions in Tanzania.

  16. Melamine-modified urea formaldehyde resin for bonding particleboards

    Science.gov (United States)

    Chung-Yun Hse; Feng Fu; Hui Pan

    2008-01-01

    For the development of a cost-effective melamine-modified urea formaldehyde resin (MUF), the study evaluated the effects of reaction pH and melamine content on resin properties and bond performance of the MUF resin adhesive systems. Eight resins, each with three replicates, were prepared in a factorial experiment that included two formulation variables: two reaction...

  17. Sol-gel based sensor for selective formaldehyde determination

    International Nuclear Information System (INIS)

    Bunkoed, Opas; Davis, Frank; Kanatharana, Proespichaya; Thavarungkul, Panote; Higson, Seamus P.J.

    2010-01-01

    We report the development of transparent sol-gels with entrapped sensitive and selective reagents for the detection of formaldehyde. The sampling method is based on the adsorption of formaldehyde from the air and reaction with β-diketones (for example acetylacetone) in a sol-gel matrix to produce a yellow product, lutidine, which was detected directly. The proposed method does not require preparation of samples prior to analysis and allows both screening by visual detection and quantitative measurement by simple spectrophotometry. The detection limit of 0.03 ppmv formaldehyde is reported which is lower than the maximum exposure concentrations recommended by both the World Health Organisation (WHO) and the Occupational Safety and Health Administration (OSHA). This sampling method was found to give good reproducibility, the relative standard deviation at 0.2 and 1 ppmv being 6.3% and 4.6%, respectively. Other carbonyl compounds i.e. acetaldehyde, benzaldehyde, acetone and butanone do not interfere with this analytical approach. Results are provided for the determination of formaldehyde in indoor air.

  18. Harmful Effects of Formaldehyde and Possible Protective Effect of ...

    African Journals Online (AJOL)

    2017-05-22

    May 22, 2017 ... paraformaldehyde at a temperature of 35–40°C in specifically prepared glass assembly. Each group (n = 7) were placed in glass cages (50 cm × 20 cm ..... 7. Zararsiz I, Kus I, Akpolat N, Songur A, Ogeturk M,. Sarsilmaz M. Protective effects of omega-3 essential fatty acids against formaldehyde-induced ...

  19. Dispersion adhesives from soy flour and phenol formaldehyde

    Science.gov (United States)

    Charles R. Frihart; James M. Wescott; Amy E. Traska

    2007-01-01

    Higher petroleum prices and greater interest in bio-based adhesives have stimulated a considerable amount of research on incorporating soybean flour into wood adhesives in recent years. In some cases, soy was used at low levels as an extender for phenol-formaldehyde (PF) adhesives; in other cases, highly hydrolyzed soy flour was used. Although progress was made in...

  20. IRIS Toxicological Review of Formaldehyde (Interagency Science Consultation Draft)

    Science.gov (United States)

    On June 2, 2010, the Toxicological Review of Formaldehyde and the charge to external peer reviewers were released for external peer review and public comment. The Toxicological Review and charge were reviewed internally by EPA and by other federal agencies and White House Offices...

  1. Influence of indoor formaldehyde pollution on respiratory system ...

    African Journals Online (AJOL)

    Some adults surveyed complained of common respiratory system disorders, including coughing (11.8%), nasal irritation (39.2%), Heterosmia (14.51%), and throat irritation (25.27%); 12% of children suffered from asthma. The analysis identified formaldehyde pollution and ventilation frequency as risk factors for respiratory ...

  2. Levels of formaldehyde and acetaldehyde in selected bottled ...

    African Journals Online (AJOL)

    The levels of formaldehyde and acetaldehyde in bottled drinking water and the effect of storage time and storage conditions on their levels were determined. A total of 144 samples of six brands of bottled drinking water were purchased from Dar es Salaam, Iringa, Mwanza and Arusha regions in Tanzania. Analysis was ...

  3. The methods of formaldehyde emission testing of engine: A review

    Science.gov (United States)

    Zhang, Chunhui; Geng, Peng; Cao, Erming; Wei, Lijiang

    2015-12-01

    A number of measurements have been provided to detect formaldehyde in the atmosphere, but there are no clear unified standards in engine exhaust. Nowadays, formaldehyde, an unregulated emission from methanol engine, has been attracting increasing attention by researchers. This paper presents the detection techniques for formaldehyde emitted from the engines applied in recent market, introducing the approaches in terms of unregulated emission tests of formaldehyde, which involved gas chromatography, liquid chromatography, chromatography-mass spectrometry, chromatography-spectrum, Fourier infrared spectroscopy and spectrophotometry. The author also introduces the comparison regarding to the advantages of the existing detection techniques based on the principle, to compare with engine exhaust sampling method, the treatment in advance of detection, obtaining approaches accessing to the qualitative and quantitative analysis of chromatograms or spectra. The accuratest result obtained was chromatography though it cannot be used continuously. It also can be utilized to develop high requirements of emissions and other regulations. Fourier infrared spectroscopy has the advantage of continuous detection for a variety of unregulated emissions and can be applied to the bench in variable condition. However, its accuracy is not as good as chromatography. As the conclusion, a detection technique is chosen based on different requirements.

  4. Effect of different catalysts on urea-formaldehyde resin synthesis

    Science.gov (United States)

    Qi-Ning Sun; Chung-Yun Hse; Todd F. Shupe

    2014-01-01

    Four catalysts (H2SO4, HCl, H3PO4, and NaOH/NH4OH) were studied in the preparation of melamine modified urea– formaldehyde (UFM) resins. 13C-nuclear magnetic resonance spectroscopic analysis of the UFM resins at different synthesis stages revealed the...

  5. Studies of Deactivation of Methanol to Formaldehyde Selective Oxidation Catalyst

    DEFF Research Database (Denmark)

    Raun, Kristian Viegaard; Schumann, Max; Høj, Martin

    This work presents a study of the deactivation behavior of Fe-Mo oxide catalyst during selective oxidation of methanol to formaldehyde in a period of 5 days. The structural changes in the catalyst have been investigated in situ for the initial 10 h by Raman spectroscopy, and the structure after 5...

  6. 78 FR 34820 - Formaldehyde Emissions Standards for Composite Wood Products

    Science.gov (United States)

    2013-06-10

    ..., and thus endogenous levels are present in the body. In 1991, EPA classified formaldehyde as a probable... reviewed in 2011 (Ref. 10). While the economic analysis of cancer benefits is based on the unit risk, which.... Hardwood plywood--a. General definition. The statute defines the term ``hardwood plywood'' as a hardwood or...

  7. The histological effects of formaldehyde vapour on the lungs ...

    African Journals Online (AJOL)

    This study was designed to investigate the effects 40% formaldehyde inhalation on the lungs. Twenty adult male albino rats were used for this study and they were subdivided into five groups (A, B, C, D, and E) with each group containing 5 rats. The animals in group A served as control, while groups B, C, D and E served as ...

  8. Effect of modification with nitrocellulose and phenol formaldehyde ...

    African Journals Online (AJOL)

    GRACE

    2006-05-16

    May 16, 2006 ... Processability characteristics and physico-mechanical properties of natural rubber modified with cashew nut shell liquid and cashew nut shell liquid formaldehyde resin. Eur. Poly. J. 38: 163-168. Waldie JM (1983), Oil and Colour Chemists' Association of Association of Australia. Surface Coatings, Vol.1: ...

  9. Effect of cultivar and formaldehyde treatment of barley grain on ...

    African Journals Online (AJOL)

    ... but increased the time (h) to produce 50% of A and reduced the time (h) to produce 95% of A. The reduction in gas production ranged from 33.3 to 51 mL/g OM with 6 h incubation showing the highest decrease in gas production. It is concluded that formaldehyde treatment may provide an opportunity to manipulate the site ...

  10. Analyses of cocondensation of melamine and urea through carbon 13 enriched formaldehyde with carbon 13 nuclear magnetic resonance spectroscopy

    Science.gov (United States)

    Tomita Bunchiro; Chung-Yun Hse

    1995-01-01

    The urea-formaldehyde (UF) resins, melamine-formaldehyde (MF) resins, and melamine-urea-formaldehyde (MUF) cocondensed resins were synthesized using the labeling method with 13C enriched formaldehyde unde neutral conditions and their 13C-NMR (nuclear magnetic resonance) spectra were analyzed. The remarkable down-field...

  11. Analysis on cocondensation of melamine and urea through carbon 13 enriched formaldehyde with carbon 13 nuclear magnetic resonance spectroscopy

    Science.gov (United States)

    Bunichiro Tomita; Chung-Yun Hse

    1995-01-01

    The urea-formaldehyde (UF) resins, melamine-formaldehyde (MF) resins, and melamine-urea-formaldehyde (MUF) cocondensed resins were synthesized using the labeling method of 13C enriched formaldehyde udner neutral conditions and their 13C-NMR (nuclear magnetic resonance) spectra were analyzed. The remarkable down-field shifts...

  12. Growth of Bacillus methanolicus in 2 M methanol at 50 °C: the effect of high methanol concentration on gene regulation of enzymes involved in formaldehyde detoxification by the ribulose monophosphate pathway.

    Science.gov (United States)

    Bozdag, Ahmet; Komives, Claire; Flickinger, Michael C

    2015-07-01

    Bacillus methanolicus MGA3 is a Gram-positive aerobic methylotroph growing optimally at 50-53°C. Methylotrophy in B. methanolicus is encoded on pBM19 and by two chromosomal copies of the methanol dehydrogenase (mdh), hexulose phosphate synthase (hps) and phosphohexuloisomerase (phi) genes. However, there are no published studies on the regulation of methylotrophy or the dominant mechanism of detoxification of intracellular formaldehyde in response to high methanol concentration. The µ max of B. methanolicus MGA3 was assessed on methanol, mannitol and glucose. B. methanolicus achieved a µ max at 25 mM initial methanol of 0.65 ± 0.007 h(-1), which decreased to 0.231 ± 0.004 h(-1) at 2 M initial methanol. Slow growth was also observed with initial methanol concentrations of >2 M. The µ max on mannitol and glucose are 0.532 ± 0.002 and 0.336 ± 0.003 h(-1), respectively. Spiking cultures with additional methanol (100 mM) did not disturb the growth rate of methanol-grown cells, whereas, a 50 mM methanol spike halted the growth in mannitol. Surprisingly, growth in methanol was inhibited by 1 mM formaldehyde, while mannitol-grown cells tolerated 2 mM. Moreover, mannitol-grown cells removed formaldehyde faster than methanol-grown cells. Further, we show that methanol oxidation in B. methanolicus MGA3 is mainly carried out by the pBM19-encoded mdh. Formaldehyde and formate addition down-regulate the mdh and hps genes in methanol-grown cells. Similarly, they down-regulate mdh genes in mannitol-grown cells, but up-regulate hps. Phosphofructokinase (pfk) is up-regulated in both methanol and mannitol-grown cells, which suggests that pfk may be a possible synthetic methylotrophy target to reduce formaldehyde growth toxicity at high methanol concentrations.

  13. Regulation of methylamine and formaldehyde metabolism in Arthrobacter P1. Formaldehyde is the inducing signal for the synthesis of the RuMP cycle enzyme hexulose phosphate synthase

    NARCIS (Netherlands)

    Croes, L.M.; Dijkhuizen, L.

    The inducing potential of formaldehyde on the synthesis of hexulose phosphate synthase, a key enzyme of the RuMP cycle in Arthrobacter P1, was investigated in resting cell suspensions. Induction of this enzyme only occurred at formaldehyde concentrations of 0.5 mM and below. No evidence was obtained

  14. Thermodynamics of the formaldehyde-water and formaldehyde-ice systems for atmospheric applications.

    Science.gov (United States)

    Barret, Manuel; Houdier, Stephan; Domine, Florent

    2011-01-27

    Formaldehyde (HCHO) is a species involved in numerous key atmospheric chemistry processes that can significantly impact the oxidative capacity of the atmosphere. Since gaseous HCHO is soluble in water, the water droplets of clouds and the ice crystals of snow exchange HCHO with the gas phase and the partitioning of HCHO between the air, water, and ice phases must be known to understand its chemistry. This study proposes thermodynamic formulations for the partitioning of HCHO between the gas phase and the ice and liquid water phases. A reanalysis of existing data on the vapor-liquid equilibrium has shown the inadequacy of the Henry's law formulation, and we instead propose the following equation to predict the mole fraction of HCHO in liquid water at equilibrium, X(HCHO,liq), as a function of the partial pressure P(HCHO) (Pa) and temperature T (K): X(HCHO,liq) = 1.700 × 10(-15) e((8014/T))(P(HCHO))(1.105). Given the paucity of data on the gas-ice equilibrium, the solubility of HCHO and the diffusion coefficient (D(HCHO)) in ice were measured by exposing large single ice crystals to low P(HCHO). Our recommended value for D(HCHO) over the temperature range 243-266 K is D(HCHO) = 6 × 10(-12) cm(2) s(-1). The solubility of HCHO in ice follows the relationship X(HCHO,ice) = 9.898 × 10(-13) e((4072/T))(P(HCHO))(0.803). Extrapolation of these data yields the P(HCHO) versus 1/T phase diagram for the H(2)O-HCHO system. The comparison of our results to existing data on the partitioning of HCHO between the snow and the atmosphere in the high arctic highlights the interplay between thermodynamic equilibrium and kinetics processes in natural systems.

  15. Enzymatic synthesis of C-11 formaldehyde: concise communication

    International Nuclear Information System (INIS)

    Slegers, G.; Lambrecht, R.H.D.; Vandewalle, T.; Meulewaeter, L.; Vandecasteele, C.

    1984-01-01

    An enzymatic synthesis of C-11 formaldehyde from C-11 methanol is presented, with immobilized alcohol oxidase and catalase: a rapid, simple procedure, with a high and reproducible yield. Carbon-11 methanol is oxidized to C-11 formaldehyde by passage over a column on which the enzymes alcohol oxidase and catalase are immobilized. The catalase increases reaction velocity by recycling the oxygen, and prevents destruction of the alcohol oxidase by eliminating the excess of hydrogen peroxide. The yield of the enzyme-catalyzed oxidation was 80-95%. A specific activity of 400-450 mCi/μmole was obtained at EOB + 20 min. Various immobilization techniques and the optimal reaction conditions of the immobilized enzymes are investigated

  16. Simple, rapid method for the preparation of isotopically labeled formaldehyde

    Science.gov (United States)

    Hooker, Jacob Matthew [Port Jefferson, NY; Schonberger, Matthias [Mains, DE; Schieferstein, Hanno [Aabergen, DE; Fowler, Joanna S [Bellport, NY

    2011-10-04

    Isotopically labeled formaldehyde (*C.sup..sctn.H.sub.2O) is prepared from labeled methyl iodide (*C.sup..sctn.H.sub.3I) by reaction with an oxygen nucleophile having a pendant leaving group. The mild and efficient reaction conditions result in good yields of *C.sup..sctn.H.sub.2O with little or no *C isotopic dilution. The simple, efficient production of .sup.11CH.sub.2O is described. The use of the .sup.11CH.sub.2O for the formation of positron emission tomography tracer compounds is described. The reaction can be incorporated into automated equipment available to radiochemistry laboratories. The isotopically labeled formaldehyde can be used in a variety of reactions to provide radiotracer compounds for imaging studies as well as for scintillation counting and autoradiography.

  17. Nanocomposite sensors of propylene glycol, dimethylformamide and formaldehyde vapors

    Directory of Open Access Journals (Sweden)

    Z. Adamyan

    2018-02-01

    Full Text Available The results of research works related to the study of thick-film multiwall carbon nanotube–tin oxide nanocomposite sensors of propylene glycol (PG, dimethylformamide (DMF and formaldehyde (FA vapors are presented in this paper. These sensors were derived using hydrothermal synthesis and sol–gel methods. Investigations of response–recovery characteristics in the 50–300 °C operating temperature range reveal that the optimal operating temperature for PG, DMF and FA vapor sensors, taking into account both high response and acceptable response and recovery times are about 200 and 220 °C, respectively. The dependence of the sensor response on gas concentration is linear in all cases. Minimal propylene glycol, dimethylformamide and formaldehyde gas concentrations, where the perceptible signal was noticed, were 13, 5 and 115 ppm, respectively.

  18. Molecularly Imprinted Polymer Nanoparticles for Formaldehyde Sensing with QCM

    Directory of Open Access Journals (Sweden)

    Munawar Hussain

    2016-06-01

    Full Text Available Herein, we report on molecularly imprinted polymers (MIPs for detecting formaldehyde vapors in air streams. A copolymer thin film consisting of styrene, methacrylic acid, and ethylene glycol dimethacrylate on quartz crystal microbalance (QCM yielded a detection limit of 500 ppb formaldehyde in dry air. Surprisingly, these MIPs showed specific behavior when tested against a range of volatile organic compounds (VOCs, such as acetaldehyde, methanol, formic acid, and dichloromethane. Despite thus being a suitable receptor in principle, the MIPs were not useful for measurements at 50% humidity due to surface saturation by water. This was overcome by introducing primary amino groups into the polymer via allyl amine and by changing the coating morphology from thin film to nanoparticles. This led to the same limit of detection (500 ppb and selectivity as before, but at the real-life conditions of 50% relative humidity.

  19. Molecularly Imprinted Polymer Nanoparticles for Formaldehyde Sensing with QCM

    Science.gov (United States)

    Hussain, Munawar; Kotova, Kira; Lieberzeit, Peter A.

    2016-01-01

    Herein, we report on molecularly imprinted polymers (MIPs) for detecting formaldehyde vapors in air streams. A copolymer thin film consisting of styrene, methacrylic acid, and ethylene glycol dimethacrylate on quartz crystal microbalance (QCM) yielded a detection limit of 500 ppb formaldehyde in dry air. Surprisingly, these MIPs showed specific behavior when tested against a range of volatile organic compounds (VOCs), such as acetaldehyde, methanol, formic acid, and dichloromethane. Despite thus being a suitable receptor in principle, the MIPs were not useful for measurements at 50% humidity due to surface saturation by water. This was overcome by introducing primary amino groups into the polymer via allyl amine and by changing the coating morphology from thin film to nanoparticles. This led to the same limit of detection (500 ppb) and selectivity as before, but at the real-life conditions of 50% relative humidity. PMID:27376287

  20. Formaldehyde and acetaldehyde emissions from residential wood combustion in Portugal

    Science.gov (United States)

    Cerqueira, Mário; Gomes, Luís; Tarelho, Luís; Pio, Casimiro

    2013-06-01

    A series of experiments were conducted to characterize formaldehyde and acetaldehyde emissions from residential combustion of common wood species growing in Portugal. Five types of wood were investigated: maritime pine (Pinus pinaster), eucalyptus (Eucalyptus globulus), cork oak (Quercus suber), holm oak (Quercus rotundifolia) and pyrenean oak (Quercus pyrenaica). Laboratory experiments were performed with a typical wood stove used for domestic heating in Portugal and operating under realistic home conditions. Aldehydes were sampled from diluted combustion flue gas using silica cartridges coated with 2,4-dinitrophenylhydrazine and analyzed by high performance liquid chromatography with diode array detection. The average formaldehyde to acetaldehyde concentration ratio (molar basis) in the stove flue gas was in the range of 2.1-2.9. Among the tested wood types, pyrenean oak produced the highest emissions for both formaldehyde and acetaldehyde: 1772 ± 649 and 1110 ± 454 mg kg-1 biomass burned (dry basis), respectively. By contrast, maritime pine produced the lowest emissions: 653 ± 151 and 371 ± 162 mg kg-1 biomass (dry basis) burned, respectively. Aldehydes were sampled separately during distinct periods of the holm oak wood combustion cycles. Significant variations in the flue gas concentrations were found, with higher values measured during the devolatilization stage than in the flaming and smoldering stages.

  1. Low-density carbonized resorcinol-formaldehyde foams

    International Nuclear Information System (INIS)

    Kong, F.M.; Buckley, S.R.; Giles, C.L. Jr.; Haendler, B.L.; Hair, L.M.; Letts, S.A.; Overturf, G.E. III; Price, C.W.; Cook, R.C.

    1991-01-01

    This report documents research and development on resorcinol- formaldehyde-based foam materials conducted between 1986 and June 1990, when the effort was discontinued. The foams discussed are resorcinol-formaldehyde (RF) foam, carbonized RF (CRF) foam, and two composite foams, a polystyrene/RF (PS/RF) foam and its carbonized derivative (CPR). The RF foams are synthesized by the polycondensation of resorcinol with formaldehyde in a slightly basic solution. Their structure and density depend strongly on the concentration of the sodium carbonate catalyst. The have an interconnected bead structure similar to that of silica aerogels; bead sizes range from 30 to 130 Angstrom, and cell sizes are less than 0.1 μm. We have achieved densities of 16 to 200 mg/cm 3 . The RF foams can be pyrolyzed in an inert atmosphere to form a vitreous carbon foam (CRF), which has a similar microstructure but much higher mechanical strength. The PS/RF foams are obtained by filling the 2- to 3-μm cells of PS foam (a low-density hydrocarbon foam we have developed) with RF. The resultant foams have the outstanding handling and machinability of the PS foam matrix and the small cell size of RF. Pyrolyzing PS/RF foams causes depolymerization and loss of the PS; the resulting CPR foams have a structure similar to the PS foams in which CRF both replicates and fills the PS cells

  2. Formaldehyde, methanol and hydrocarbon emissions from methanol-fueled cars

    International Nuclear Information System (INIS)

    Williams, R.L.; Lipari, F.; Potter, R.A.

    1990-01-01

    Exhaust and evaporative emissions tests were conducted on several methanol- and gasoline-fueled vehicles. Separate samples for chromatographic analysis of formaldehyde, methanol, and individual hydrocarbons were collected in each of the three phases of the driving cycle and in each of the two portions of the evaporative emissions test. One vehicle, equipped with an experimental variable-fuel engine, was tested using methanol/gasoline fuel mixtures of 100, 85, 50, 15, and 0 percent methanol. Combustion-generated hydrocarbons were lowest using methanol fuel, and increased several-fold as the gasoline fraction was increased. Gasoline components in the exhaust increased from zero as the gasoline fraction of the fuel was increased. On the other hand, formaldehyde emissions were several times higher using methanol fuel than they were using gasoline. A dedicated methanol car and the variable-fuel car gave similar emissions patterns when they both were tested using methanol fuel. The organic-carbon composition of the exhaust was 85-90 percent methanol, 5-7 percent formaldehyde, and 3-9 percent hydrocarbons. Several cars that were tested using gasoline emitted similar distributions of hydrocarbons, even through the vehicles represented a broad range of current and developmental engine families and emissions control systems

  3. Fast fluorometric flow injection analysis of formaldehyde in atmospheric water

    Energy Technology Data Exchange (ETDEWEB)

    Dong, S.; Dasgupta, P.K.

    1987-06-01

    Formaldehyde can be determined in aqueous solution at a rate of 45 samples/h with a small sample requirement (100 ..mu..L). The fluorescence of 3,5-diacetyl-1,4-dihydrolutidine formed upon reaction of formaldehyde with ammonium acetate and 2,4-pentanedione (25 s, 95 /sup 0/C) is monitored with a filter fluorometer. The detection limit is 0.1 ..mu..M (3 ..mu..g/L) or 10 pmol of HCHO. The response is linear up to 3.3 ..mu..M (100 ..mu..g/L), the departure from linearity at 0.33 mM is 21%, but high levels are satisfactorily determined with a second-order calibration equation. Interference from S(IV) has been investigated in detail and completely eliminated by addition of H/sub 2/O/sub 2/ before rendering the sample alkaline. There are no effects from commonly occurring metal ions and anions; the method is very selective to formaldehyde compared to other carbonyl compounds. A S(IV)-containing preservative has been formulated for the stabilization of low concentrations of HCHO. Results are presented for fogwater samples. 8 figures, 41 references.

  4. 21 CFR 862.1500 - Malic dehydrogenase test system.

    Science.gov (United States)

    2010-04-01

    ... Systems § 862.1500 Malic dehydrogenase test system. (a) Identification. A malic dehydrogenase test system is a device that is intended to measure the activity of the enzyme malic dehydrogenase in serum and... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Malic dehydrogenase test system. 862.1500 Section...

  5. A role for glucose-6-phosphate dehydrogenase

    African Journals Online (AJOL)

    STORAGESEVER

    2009-01-19

    -phosphate dehydrogenase activity in male rats. Twelve (12) male rats were divided into two groups of six (6) rats each. Group 1 rats were control rats which received normal saline while group 2 rats were treated with.

  6. Genetics Home Reference: dihydrolipoamide dehydrogenase deficiency

    Science.gov (United States)

    ... Lacaille F, de Keyzer Y, Di Martino V, de Lonlay P. Dihydrolipoamide dehydrogenase deficiency: a still overlooked cause of recurrent acute liver failure and Reye-like syndrome. Mol Genet Metab. 2013 May;109(1):28- ...

  7. Histochemical localization of cytokinin oxidase/dehydrogenase ...

    African Journals Online (AJOL)

    Jane

    2011-08-15

    dehydrogenase, Withania somnifera, CKX localization. INTRODUCTION. Cytokinin (Ck) is a plant hormone that plays a crucial role in many fundamental processes of plant development throughout the life cycle. These include ...

  8. Identification of lactaldehyde dehydrogenase and glycolaldehyde dehydrogenase as functions of the same protein in Escherichia coli.

    Science.gov (United States)

    Caballero, E; Baldomá, L; Ros, J; Boronat, A; Aguilar, J

    1983-06-25

    Lactaldehyde dehydrogenase is an enzyme involved in the aerobic metabolism of fucose in wild type Escherichia coli, and glycolaldehyde dehydrogenase is an enzyme involved in the metabolism of ethylene glycol in mutant cells able to utilize this glycol. Both enzyme sources display oxidative activity on either substrate with a constant ratio between these activities. We have found that both enzymatic activities present the same electrophoretic mobility when crude extracts were electrophoresed in polyacrylamide gels and the gels stained for enzyme activities. Furthermore, both enzymatic activities co-chromatograph in a DEAE-Sephadex column. If lactaldehyde dehydrogenase of wild type cells is purified near homogeneity and the purification procedure is screened for both aldehydes as substrates, only one enzyme is apparent, giving again a constant ratio between lactaldehyde and glycolaldehyde dehydrogenase activities. Genetic evidence of the fact that both activities are functions of the same protein is provided by the observation that mutation to thermosensitivity for the production of lactaldehyde dehydrogenase affected in the same way the production of glycolaldehyde dehydrogenase. Glycolaldehyde dehydrogenase from mutant cells is purified in a procedure coincident with the lactaldehyde dehydrogenase purification, yielding a single enzyme electrophoretically indistinguishable from the purified lactaldehyde dehydrogenase. Peptide mapping of the purified preparation after digestion with chymotrypsin or Staphylococcus aureus protease V8 gives an indistinguishable band pattern between both enzymes.

  9. Isocitrate dehydrogenase mutations in gliomas

    Science.gov (United States)

    Waitkus, Matthew S.; Diplas, Bill H.; Yan, Hai

    2016-01-01

    Over the last decade, extraordinary progress has been made in elucidating the underlying genetic causes of gliomas. In 2008, our understanding of glioma genetics was revolutionized when mutations in isocitrate dehydrogenase 1 and 2 (IDH1/2) were identified in the vast majority of progressive gliomas and secondary glioblastomas (GBMs). IDH enzymes normally catalyze the decarboxylation of isocitrate to generate α-ketoglutarate (αKG), but recurrent mutations at Arg132 of IDH1 and Arg172 of IDH2 confer a neomorphic enzyme activity that catalyzes reduction of αKG into the putative oncometabolite D-2-hydroxyglutate (D2HG). D2HG inhibits αKG-dependent dioxygenases and is thought to create a cellular state permissive to malignant transformation by altering cellular epigenetics and blocking normal differentiation processes. Herein, we discuss the relevant literature on mechanistic studies of IDH1/2 mutations in gliomas, and we review the potential impact of IDH1/2 mutations on molecular classification and glioma therapy. PMID:26188014

  10. Regulation of glutamate dehydrogenase in Bacillus subtilis.

    OpenAIRE

    Kane, J F; Wakim, J; Fischer, R S

    1981-01-01

    The activity of the nicotinamide adenine dinucleotide-dependent glutamate dehydrogenase in Bacillus subtilis was influenced by the carbon source, but not the nitrogen source, in the growth medium. The highest specific activity for this enzyme was found when B. subtilis was grown in a minimal or rich medium that contained glutamate as the carbon source. It is proposed that glutamate dehydrogenase serves a catabolic function in the metabolism of glutamate, is induced by glutamate, and is subjec...

  11. Regulation of glutamate dehydrogenase in Bacillus subtilis.

    Science.gov (United States)

    Kane, J F; Wakim, J; Fischer, R S

    1981-01-01

    The activity of the nicotinamide adenine dinucleotide-dependent glutamate dehydrogenase in Bacillus subtilis was influenced by the carbon source, but not the nitrogen source, in the growth medium. The highest specific activity for this enzyme was found when B. subtilis was grown in a minimal or rich medium that contained glutamate as the carbon source. It is proposed that glutamate dehydrogenase serves a catabolic function in the metabolism of glutamate, is induced by glutamate, and is subject to catabolite repression. PMID:6118356

  12. Urea-formaldehyde resins: production, application, and testing

    Science.gov (United States)

    Nuryawan, A.; Risnasari, I.; Sucipto, T.; Heri Iswanto, A.; Rosmala Dewi, R.

    2017-07-01

    Urea-formaldehyde (UF) resin, one of the most important formaldehyde resin adhesives, is a polymeric condensation product of formaldehyde with urea, and being widely used for the manufacture of wood-based composite panels, such as plywood, particleboard, and fiberboard. In spite of its benefits such as fast curing, good performance in the panels (colorless), and lower cost; formaldehyde emission (FE) originated from either UF resin itself or composite products bonded by UF resins is considered a critical drawback as it affects human health particularly in indoor environment. In order to reduce the FE, lowering formaldehyde/urea (F/U) mole ratio in the synthesis of the UF resin was done. In this study, synthesis of UF resins was carried out following the conventional alkaline-acid two-step reaction with a second addition of urea, resulting in F/U mole ratio around 1.0, namely 0.95; 1.05, and 1.15. The UF resins produced were used as binder for particleboard making. The board was manufactured in the laboratory using shaving type particle of Gmelina wood, 8% UF resin based on oven dry particle, and 1% NH4Cl (20%wt) as hardener for the resin. The target of the thickness was 10 mm and the dimension was 25 cm x 25 cm. The resulted particleboard then was evaluated the physical and the mechanical properties by Japanese Industrial Standard (JIS) A 5908 (2003). Further, the resulted particleboard also was used for the mice cage’s wall in order to mimic the real living environment. After four weeks exposure in the cages, the mice then were evaluated their mucous organs as well as their blood. The experiment results were as follows: 1) It was possible to synthesis UF resins with low F/U mole ratio; 2) However, the particleboard bonded UF resins with low F/U mole ratio showed poor properties, particularly on the thickness swelling and modulus of elasticity; 3) There was no significant differences among the mucous organs of the mice after a month exposure FE originated from

  13. Melamine-bridged alkyl resorcinol modified urea - formaldehyde resin for bonding hardwood plywood

    Science.gov (United States)

    Chung-Yun Hse; Mitsuo Higuchi

    2010-01-01

    A powdery product was obtained by the reaction of methylolated melamine with alkyl resorcinols to form melamine-bridged alkyl resorcinols (MARs). The effects of the addition of this powder on the bonding strength and formaldehyde emission of urea–formaldehyde (UF) resins were investigated. Three types of UF resins with a formaldehyde/urea molar ratio of 1.3 synthesized...

  14. Formaldehyde-Induced Genome Instability is Suppressed by an XPF-dependent Pathway

    Science.gov (United States)

    Kumari, Anuradha; Lim, Yun Xin; Newell, Amy Hanlon; Olson, Susan B.; McCullough, Amanda K.

    2011-01-01

    Formaldehyde is a reactive chemical that is commonly used in the production of industrial, laboratory, household, and cosmetic products. The causal association between formaldehyde exposure and increased incidence of cancer led the International Agency for Research on Cancer to classify formaldehyde as a carcinogen. Formaldehyde-induced DNA-protein crosslinks (DPCs) elicit responses involving nucleotide excision repair (NER) and homologous recombination (HR) repair pathways; however, little is known about the cellular and genetic changes that subsequently lead to formaldehyde-induced genotoxic and cytotoxic effects. Herein, investigations of genes that modulate the cytotoxic effects of formaldehyde exposure revealed that of five NER-deficient Chinese Hamster Ovary (CHO) cell lines tested, XPF- and ERCC1-deficient cells were most sensitive to formaldehyde treatment as compared to wild-type cells. Cell cycle analyses revealed that formaldehyde-treated XPF-deficient cells exhibited an immediate G2/M arrest that was associated with altered cell ploidy and apoptosis. Additionally, an elevated number of DNA double-strand breaks (DSBs), chromosomal breaks and radial formation were also observed in XPF-deficient cells following formaldehyde treatment. Formaldehyde-induced DSBs occurred in a replication-dependent, but an XPF-independent manner. However, delayed DSB repair was observed in the absence of XPF function. Collectively, our findings highlight the role of an XPF-dependent pathway in mitigating the sensitivity to formaldehyde-induced DNA damage as evidenced by the increased genomic instability and reduced cell viability in an XPF-deficient background. In addition, centrosome and microtubule abnormalities, as well as enlarged nuclei, caused by formaldehyde exposure are also demonstrated in a repair-proficient cell line. PMID:22186232

  15. Porphinogen Formation from the Co-Oligomerization of Formaldehyde and Pyrrole: Free Energy Pathways.

    Science.gov (United States)

    Kua, Jeremy; Loli, Helen

    2017-10-26

    We have investigated the nonoxidative stepwise co-oligomerization of formaldehyde and pyrrole to form porphinogen using density functional theory calculations that include free energy corrections. While the addition of formaldehyde to the pyrrole nitrogen is kinetically favored, thermodynamics suggest that this reaction is reversible in aqueous solution. The more thermodynamically favorable addition of formaldehyde to the ortho-carbon of pyrrole begins a stepwise process, forming dipyrromethane via an azafulvene intermediate. Subsequent additions of formaldehyde and pyrrole lead to bilanes (linear tetrapyrroles), which favorably cyclize to form porphinogen. Porphinogen is a precursor to porphin, the simplest unsubstituted porphyrin that could have played a role in primitive metabolism at the origin of life.

  16. A Formaldehyde Exposure Assessment Tool for Occupants of FEMA Temporary Housing Units

    Energy Technology Data Exchange (ETDEWEB)

    Parthasarathy, Srinandini; Spears, Michael; Maddalena, Randy L.; Russell, Marion L; Apte, Michael G.

    2010-10-01

    The report outlines the methodology used to develop a web-based tool to assess the formaldehyde exposure of the occupants of Federal Emergency Management Administration (FEMA) temporary housing units (THUs) after Hurricanes Katrina and Rita in 2005. Linear regression models were built using available data to retrospectively estimate the indoor temperature and relative humidity, formaldehyde emission factors and concentration, and hence the formaldehyde exposures. The interactive web-tool allows the user to define the inputs to the model to evaluate formaldehyde exposures for different scenarios.

  17. Fiber-Based Adsorbents Tailored for PLSS Ammonia and Formaldehyde Removal, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Development of advanced lightweight Trace Contaminant Control (TCC) filters plays an important role in removing ammonia and formaldehyde contaminants?both those...

  18. Inactivation kinetics of formaldehyde on N-acetyl-β-D-glucosaminidase from Nile tilapia (Oreochromis niloticus).

    Science.gov (United States)

    Zhang, Wei-Ni; Bai, Ding-Ping; Lin, Xin-Yu; Chen, Qing-Xi; Huang, Xiao-Hong; Huang, Yi-Fan

    2014-04-01

    Formaldehyde is a widely used sanitizer in aquaculture in China, while the appropriate concentration is not available to be used effectively and without damage to tilapia much less to its reproductive function. N-acetyl-β-D-glucosaminidase (EC 3.2.1.52, NAGase), hydrolyzing the oligomers of N-acetyl-β-D-glucosamine into monomer, is proved to be correlated with reproduction of male animals. In this paper, NAGase from spermary of tilapia was chosen as the material to study the effects of formaldehyde on its activity in order to further investigate the effects of formaldehyde use on tilapia reproduction. The results showed the relationship between the residual enzyme activity and the concentration of formaldehyde was concentration dependent, and the IC50 value was estimated to be 3.2 ± 0.1 %. Appropriate concentration of formaldehyde leaded to competitive reversible inhibition on tilapia NAGase. Moreover, formaldehyde could reduce the thermal and pH stability of the enzyme. The inactivation kinetics of formaldehyde on the enzyme was studied using the kinetic method of substrate reaction. The inactivation model was setup, and the rate constants were determined. The results showed that the inactivation of formaldehyde on tilapia NAGase was a slow, reversible reaction with partially residual activity. The results will give some basis to determine the concentration of formaldehyde used in tilapia culture.

  19. Formaldehyde induces rapid glutathione export from viable oligodendroglial OLN-93 cells.

    Science.gov (United States)

    Tulpule, Ketki; Schmidt, Maike M; Boecker, Karolin; Goldbaum, Olaf; Richter-Landsberg, Christiane; Dringen, Ralf

    2012-12-01

    Formaldehyde is a neurotoxic environmental pollutant that can also be produced in the body by certain enzymatic reactions. To test for the potential consequences of an exposure of oligodendrocytes to formaldehyde, we used OLN-93 cells as a model system. Treatment with formaldehyde altered the cellular glutathione (GSH) content of these cells by inducing a rapid time- and concentration-dependent export of GSH. Half-maximal effects were observed for a formaldehyde concentration of about 0.2 mM. While the basal GSH efflux from OLN-93 cells was negligible even when the cellular GSH content was doubled by pre-incubation of the cells with cadmium chloride, the formaldehyde-stimulated export increased almost proportionally to the cellular GSH content. In addition, the stimulated GSH export required the presence of formaldehyde and was almost completely abolished after removal of the aldehyde. Analysis of kinetic parameters of the formaldehyde-induced GSH export revealed similar K(m) and V(max) values of around 100 nmol/mg and 40 nmol/(hmg), respectively, for both OLN-93 cells and cultured astrocytes. The transporter responsible for the formaldehyde-induced GSH export from OLN-93 cells is most likely the multidrug resistance protein 1 (Mrp1), since this transporter is expressed in these cells and since the inhibitor MK571 completely prevented the formaldehyde-induced GSH export. The rapid export of GSH from formaldehyde-treated viable oligodendroglial cells is likely to compromise the cellular antioxidative and detoxification potential which may contribute to the known neurotoxicity of formaldehyde. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Preliminary study: Formaldehyde exposure in laboratories of Sharjah university in UAE.

    Science.gov (United States)

    Ahmed, Hafiz Omer

    2011-01-01

    Laboratory technicians, students, and instructors are at high risk, because they deal with chemicals including formaldehyde. Thus, this preliminary study was conducted to measure the concentration of formaldehyde in the laboratories of the University of Sharjah in UAE. Thirty-two air samples were collected and analyzed for formaldehyde using National Institute for Occupational Safety and Health (NIOSH) method 3500. In this method, formaldehyde reacts with chromotropic acid in the presence of sulfuric acid to form a colored solution. The absorbance of the colored solution is read in spectrophotometer at wavelength 580 nm and is proportional to the quantity of the formaldehyde in the solution. For the anatomy laboratory and in the presence of the covered cadaver, the mean concentration of formaldehyde was found to be 0.100 ppm with a range of 0.095-0.105 ppm. Whereas for the other laboratories, the highest mean concentration of formaldehyde was 0.024 ppm in the general microbiology laboratory and the lowest mean concentration of formaldehyde was 0.001 ppm in the environmental health laboratory. The 8-hour (time-weighted average) concentration of formaldehyde was found to be ranging between 0.0003 ppm in environmental health laboratory and 0.026 ppm in the anatomy laboratory. The highest level of concentration of formaldehyde in the presence of the covered cadaver in anatomy laboratory exceeded the recommended ceiling standard established by USA-NIOSH which is 0.1 ppm, but below the ceiling standard established by American Conference of Governmental Industrial Hygienists which is 0.3 ppm. Thus, it is recommended that formaldehyde levels should be measured periodically specially during the dissection in the anatomy laboratory, and local exhaust ventilation system should be installed and personal protective equipment such as safety glass and gloves should be available and be used to prevent direct skin or eye contact.

  1. NMR studies of proton exchange kinetics in aqueous formaldehyde solutions.

    Science.gov (United States)

    Rivlin, Michal; Eliav, Uzi; Navon, Gil

    2014-05-01

    Aqueous solutions of formaldehyde, formalin, are commonly used for tissue fixation and preservation. Treatment with formalin is known to shorten the tissue transverse relaxation time T2. Part of this shortening is due to the effect of formalin on the water T2. In the present work we show that the shortening of water T2 is a result of proton exchange between water and the major constituent of aqueous solutions of formaldehyde, methylene glycol. We report the observation of the signal of the hydroxyl protons of methylene glycol at 2ppm to high frequency of the water signal that can be seen at low temperatures and at pH range of 6.0±1.5 and, at conditions where it cannot be observed by the single pulse experiment, it can be detected indirectly through the water signal by the chemical exchange saturation transfer (CEST) experiment. The above finding made it possible to obtain the exchange rate between the hydroxyl protons of the methylene glycol and water in aqueous formaldehyde solutions, either using the dispersion of the spin-lattice relaxation rate in the rotating frame (1/T1ρ) or, at the slow exchange regime, from the line width hydroxyl protons of methylene glycol. The exchange rate was ∼10(4)s(-1) at pH 7.4 and 37°C, the activation energy, 50.2kJ/mol and its pH dependence at 1.1°C was fitted to: k (s(-1))=520+6.5×10(7)[H(+)]+3.0×10(9)[OH(-)]. Copyright © 2014. Published by Elsevier Inc.

  2. Rotational spectrum of formaldehyde reinvestigated using a photomixing THz synthesizer

    Science.gov (United States)

    Eliet, Sophie; Cuisset, Arnaud; Guinet, Mickaël; Hindle, Francis; Mouret, Gaël; Bocquet, Robin; Demaison, Jean

    2012-09-01

    Approximately 60 pure rotational frequency transitions of formaldehyde in its ground state have been measured with sub-MHz uncertainty in the 0.7-1.8 THz frequency range using a photomixing THz synthesizer locked onto a frequency comb. The frequencies associated with previous submillimeter and infrared data have been included in a fit providing a new set of improved molecular parameters. The assignment of each line was checked using the usual statistical diagnostics. Finally, the ability of the continuous-wave spectrometer coupled to a multipass-cell to measure THz rotational transitions of H2CO in the 31, 41 and 61 vibrational states was demonstrated.

  3. Separation and characterisation of caprolactam-formaldehyde reaction products.

    Science.gov (United States)

    Normand, Florence C; Goodall, David M; Duckett, Simon B; van Tol, Maurits F H; Nusselder, Jan-Jaap H

    2002-10-01

    Methylolation and condensation products formed in caprolactam-formaldehyde reaction mixtures have been identified using nuclear magnetic resonance (NMR) and mass spectrometry (MS). Previously unreported side-products were also detected. All of the reaction products were separated by micellar electrokinetic chromatography (MEKC) and high performance liquid chromatography (HPLC), and the separation parameters, such as efficiency and distribution constants, obtained in the two techniques were compared. For quantification, the response factors for the monomers were determined using standard calibration and hydrolysis, whilst those for the condensation products were deduced from the values of the monomers. The accurate determination of the response factors was confirmed by checking the mass balance of a known mixture.

  4. 40 CFR 721.10189 - Fatty acids, tall-oil, reaction products with (butoxymethyl) oxirane formaldehyde-phenol polymer...

    Science.gov (United States)

    2010-07-01

    ... products with (butoxymethyl) oxirane formaldehyde-phenol polymer glycidyl ether, morpholinepropanamine...-phenol polymer glycidyl ether, morpholinepropanamine, propylene glycol diamine and aliphatic polyamine, N... products with (butoxymethyl) oxirane formaldehyde-phenol polymer glycidyl ether, morpholinepropanamine...

  5. Investigation of physical, mechanical properties and formaldehyde emission of medium density fiberboard manufactured from urea formaldehyde resin reinforced with nanocrystalline cellulose

    Directory of Open Access Journals (Sweden)

    Hossein Khanjanzadeh

    2017-08-01

    Full Text Available The purpose of this study was to evaluate the physico-mechanical properties and formaldehyde emission of medium density fiberboard (MDF made from modified urea formaldehyde resin. In this study, nanocrystalline cellulose (NCC (0, 0.5, 1, 1.5 and 2 percent based on the dry weight of resin was applied to modify urea formaldehyde resin. The results of mechanical properties indicated that MOR and IB of the MDF panels significantly increased as the NCC incorporated into the UF adhesive up to 1%wt. However, further increment in the NCC content (1.5 and 2 wt% decreased the MOR and IB of the panels. Water absorption and thickness swelling after 2 h were significantly increased when the NCC content increased from 1% to 2%, but no significant differences were observed between the panels after 24 h. Also, the formaldehyde emission significantly decreased with increasing the amount of nanocrystalline cellulose.

  6. Solid phase microextraction method development for measuring Henry's Law constants of formaldehyde in aqueous solutions

    Science.gov (United States)

    Formaldehyde (HCHO) has been of special concern as an indoor air pollutant because of its existence in a wide range of products and its adverse health effects. The air-water partitioning behavior of volatile organic compounds (VOCs) such as formaldehyde is an important process th...

  7. Preparation and Characterization of Novolak Phenol Formaldehyde Resin from Liquefied Brown-Rotted Wood

    Science.gov (United States)

    Gai-Yun Li; Chung-Yun Hse; Te-Fu Qin

    2012-01-01

    The brown-rotted wood was liquefied in phenol with phosphoric acid as catalyst and the resulting liquefied products were condensed with formaldehyde to yield novolak liquefied wood-based phenol formaldehyde resin (LWPF). The results showed that brown-rotted wood could be more easily liquefied than sound wood in phenol. The residue content of liquefied wood decreased...

  8. CeO2 thin film as a low-temperature formaldehyde sensor in mixed ...

    Indian Academy of Sciences (India)

    ... chemiresistive method for various concentrations of formaldehyde vapour at room temperature (∼ 30 °C). For 0.5 ppm of formaldehyde vapour, the film shows a response and recovery time of 36 and 1 s, respectively. The vapour sensing properties of the cerium oxide film in mixed environment were studied and reported.

  9. Developing a Reference Material for Diffusion-Controlled Formaldehyde Emissions Testing

    Science.gov (United States)

    Emissions of formaldehyde from building materials can contaminate indoor air and create significant risks to human health. The need to control formaldehyde emissions from indoor materials is made more urgent by the prevailing drive to improve building energy by decreasing ventil...

  10. CeO2 thin film as a low-temperature formaldehyde sensor in mixed ...

    Indian Academy of Sciences (India)

    Administrator

    The occupational safety and health administration (OSHA) has adopted the permissible exposure level (PEL) of. 0∙75 ppm. However, formaldehyde is also a clinically important vapour observed in the human exhaled breath due to imbalance in pulmonary organ system (Poli et al. 2010). The formaldehyde analysis in the ...

  11. Influence of indoor formaldehyde pollution on respiratory system health in the urban area of Shenyang, China.

    Science.gov (United States)

    Zhai, L; Zhao, J; Xu, B; Deng, Y; Xu, Z

    2013-03-01

    The decoration of interior spaces can lead to dangerous levels of indoor formaldehyde pollution. Exposure to indoor air pollution may be responsible for nearly 2 million deaths per year in developing countries. To assess the prevalence of indoor formaldehyde pollution caused by decoration and resultant respiratory system symptoms exhibited in exposed adults and children, due to indoor formaldehyde pollution caused by decoration. Survey sites were chosen and indoor formaldehyde concentrations determined according to the standard of formaldehyde in GB50325-2001. Logistic regression models were used to derive odds ratios (ORs) and 95% confidence intervals (95% CIs) after adjusting for potential confounders for this survey. Formaldehyde concentration was above the standard in 64% of Shenyang City. Some adults surveyed complained of common respiratory system disorders, including coughing (11.8%), nasal irritation (39.2%), Heterosmia (14.51%), and throat irritation (25.27%); 12% of children suffered from asthma. The analysis identified formaldehyde pollution and ventilation frequency as risk factors for respiratory system disorders in both adults (OR=2.603, [95% CI: 1.770-3.828], OR=1.604, [95% CI: 1.146-2.244], respectively) and children (OR=4.250, [2.064-8.753], OR=1.831, [1.006-3.333], respectively). The prevalence of common respiratory system disorders was related both to formaldehyde pollution and insufficient ventilation after decorating.

  12. Formaldehyde exposure induces autophagy in testicular tissues of adult male rats.

    Science.gov (United States)

    Han, Shui-Ping; Zhou, Dang-Xia; Lin, Pu; Qin, Zhen; An, Lu; Zheng, Lie-Rui; Lei, Li

    2015-03-01

    Formaldehyde, a ubiquitous environmental pollutant, has long been suspected of causing adverse male reproductive effects. However, the molecular and cellular mechanisms underlying this phenomenon remain elusive. The overall aim of this study is to clarify the role of autophagy in male reproductive injuries induced by formaldehyde exposure, by which we can further understand the molecular mechanism of spermatogenesis and develop new targets for prevention and treatment of male infertility. In this study, electron microscopy, Western blot, and RT-PCR analysis were used to detect autophagy in testicular tissues. Moreover, testicular weights, histopathology, and morphometry were used to evaluate the reproductive injuries of formaldehyde exposure. We found that formaldehyde exposure-induced autophagy in testicular tissues was dose dependent. Increasing autophagosomes in spermatogenetic cells was observed by electron microscopy in formaldehyde exposure group. In addition, RT-PCR and Western blot analysis showed the transcription levels of the LC3-II, as well as the conversion from LC3-I to LC3-II, an indicator of autophagy, significantly increased in testicular tissue of formaldehyde exposure group in a dose dependent manner when compared with those in control group. Furthermore, the alterations of autophage were basically consistent with the changes in testicular weight and morphologic findings. In summary, formaldehyde exposure triggered autophagy, and autophagy may be a scathing factor responsible for male reproductive impairment induced by formaldehyde. © 2013 Wiley Periodicals, Inc.

  13. Formaldehyde concentrations in household air of asthma patients determined using colorimetric detector tubes

    Science.gov (United States)

    Dannemiller, Karen C.; Murphy, Johnna S.; Dixon, Sherry L.; Pennell, Kelly G.; Suuberg, Eric M.; Jacobs, David E.; Sandel, Megan

    2013-01-01

    Formaldehyde is a colorless, pungent gas commonly found in homes that is a respiratory irritant, sensitizer, carcinogen and asthma trigger. Typical household sources include plywood and particleboard, cleaners, cosmetics, pesticides, and others. Development of a fast and simple measurement technique could facilitate continued research on this important chemical. The goal of this research is to apply an inexpensive short-term measurement method to find correlations between formaldehyde sources and concentration, and formaldehyde concentration and asthma control. Formaldehyde was measured using 30-minute grab samples in length-of-stain detector tubes in homes (n=70) of asthmatics in the Boston, MA area. Clinical status and potential formaldehyde sources were determined. The geometric mean formaldehyde level was 35.1 ppb and ranged from 5–132 ppb. Based on one-way ANOVA, t-tests, and linear regression, predictors of log-transformed formaldehyde concentration included absolute humidity, season, and the presence of decorative laminates, fiberglass, or permanent press fabrics (pformaldehyde concentration was 57% higher in homes of children with very poorly controlled asthma compared to homes of other asthmatic children (p=0.078). This study provides a simple method for measuring household formaldehyde and suggests that exposure is related to poorly controlled asthma. PMID:23278296

  14. 24 CFR 3280.308 - Formaldehyde emission controls for certain wood products.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Formaldehyde emission controls for certain wood products. 3280.308 Section 3280.308 Housing and Urban Development Regulations Relating to... Body and Frame Construction Requirements § 3280.308 Formaldehyde emission controls for certain wood...

  15. "Greener" hybrid adhesives composed of urea formaldehyde resin and cottonseed meal for wood based composites

    Science.gov (United States)

    Urea formaldehyde (UF) resins are one of the most widely used adhesives in wood based composites. The major concerns of the resin utilization are free formaldehyde release and poor water resistance. As a renewable raw materials, water washed conttonseed meal can be used in wood bonding. To produce “...

  16. Simultaneous bond degradation and bond formation during phenol-formaldehyde curing with wood

    Science.gov (United States)

    Daniel J. Yelle; John Ralph

    2016-01-01

    Bonding of wood using phenol–formaldehyde adhesive develops highly durable bonds. Phenol– formaldehyde is believed to form primary bonds with wood cell wall polymers (e.g., lignin). However, it is unclear how this adhesive interacts and bonds to lignin. Through wood solubilisation methodologies, earlywood and latewood bonded assemblies were characterized using two-...

  17. CHARACTERIZATION AND REDUCTION OF FORMALDEHYDE EMISSIONS FROM A LOW-VOC LATEX PAINT

    Science.gov (United States)

    The paper discusses the measurment and analysis of the patterns of formaldehyde emission from a low volatile organic compound (VOC) latex paint applied to gypsum board, using small environmental chamber tests. The formaldehyde emissions resulted in sharp increase of chamber air...

  18. Assessment of The Effect of Formaldehyde Exposure on The Liver in ...

    African Journals Online (AJOL)

    ... effects of formaldehyde is impairment of the synthetic function of the liver in these mortuary workers. The significantly reduced total globulin level suggests that these workers may be at increased risk of suppressed humoral immunity. Key words: Detoxification, formaldehyde exposure, hepatotoxicity, liver synthetic function, ...

  19. 40 CFR Appendix B to Subpart Nnn... - Free Formaldehyde Analysis of Insulation Resins by Hydroxylamine Hydrochloride

    Science.gov (United States)

    2010-07-01

    ... with a high FF content. 2. Principle 2.1a. The basis for this method is the titration of the...—Free Formaldehyde Analysis of Insulation Resins by Hydroxylamine Hydrochloride 1. Scope This method was... method. The sample should contain approximately 0.3 grams free formaldehyde to ensure complete reaction...

  20. Characterization of novolac type liquefied wood/phenol/formaldehyde (LWPF) resin

    Science.gov (United States)

    Hui Pan; Todd F. Shupe; Chung-Yun Hse

    2009-01-01

    Novolac type liquefied wood/phenol/formaldehyde (LWPF) resins were synthesized from liquefied wood and formaldehyde. The average molecular weight of the LWPF resin made from the liquefied wood reacted in an atmospheric three neck flask increased with increasing P/W ratio. However, it decreased with increasing phenol/wood ratio when using a sealed Parr reactor. On...

  1. Guinea pig maximization tests with formaldehyde releasers. Results from two laboratories

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Boman, A; Hamann, K

    1984-01-01

    The guinea pig maximization test was used to evaluate the sensitizing potential of formaldehyde and 6 formaldehyde releasers (Forcide 78, Germall 115, Grotan BK, Grotan OX, KM 200 and Preventol D2). The tests were carried out in 2 laboratories (Copenhagen and Stockholm), and although we intended...

  2. Effect of ventilation rate and board loading on formaldehyde concentration : a critical review of the literature

    Science.gov (United States)

    George E. Myers

    1984-01-01

    A critical literature review has been carried out on the influence of ventilation rate (N, hr.-1) and board loading (L, m2/m3) on steady state formaldehyde concentrations (Cs, ppm) resulting from particleboard and plywood emissions. Large differences exist among boards in the extent to which their formaldehyde concentrations change with N or L in laboratory chambers....

  3. A colorimetric agarose gel for formaldehyde measurement based on nanotechnology involving Tollens reaction.

    Science.gov (United States)

    Zeng, Jing-bin; Fan, Shi-guang; Zhao, Cui-ying; Wang, Qian-ru; Zhou, Ting-yao; Chen, Xi; Yan, Zi-feng; Li, Yan-peng; Xing, Wei; Wang, Xu-dong

    2014-08-04

    Gold nanoparticles (Au NPs) coupled with Tollens reagent were used for measuring formaldehyde. Au@Ag core-shell NPs were formed along with distinct color changes from pink to deep yellow. This colorimetric system was further immobilized into an agarose gel, which was used for monitoring of gaseous formaldehyde.

  4. Inhibition of ALDH2 protects PC12 cells against formaldehyde-induced cytotoxicity: involving the protection of hydrogen sulphide.

    Science.gov (United States)

    Chen, Ying; Zhou, Cheng-Fang; Xiao, Fan; Huang, Hong-Lin; Zhang, Ping; Gu, Hong-Feng; Tang, Xiao-Qing

    2017-05-01

    Formaldehyde (FA), a common environmental contaminant, has toxic effects on the central nervous system (CNS). We have previously found that hydrogen sulphide (H 2 S), the third endogenous gaseous mediator, protects neuron against the toxicity of FA. However, the underlying mechanism is poor. Aldehyde-dehydrogenase-2 (ALDH2) plays a major role in detoxification of reactive aldehyde in a range of organs and cell types. Therefore, we speculated that H 2 S antagonizes FA-induced neurotoxicity by modulating ALDH2. In the present study, we found that the exposure of PC12 cells to FA causes increase in ALDH2 expression and activity. Daidzin, an inhibitor of ALDH2, significantly antagonizes FA-exerted cytotoxicity and oxidative stress including the accumulation of intracellular reactive oxygen species (ROS), 4-hydroxy-2-trans-nonenal (4-HNE), and malondialdehyde (MDA), in PC12 cells. We also showed that daidzin markedly attenuated FA-induced apoptosis in PC12 cells. Furthermore, we found that H 2 S reverses FA-elicited upregulation of ALDH2 in PC12 cells. Our results demonstrated the involvement of downregulation of ALDH2 in the protection of H 2 S against FA neurotoxicity. © 2017 John Wiley & Sons Australia, Ltd.

  5. Airborne In-Situ Measurements of Formaldehyde Over California: First Results from the Compact Formaldehyde Fluorescence Experiment (COFFEE) Instrument

    Science.gov (United States)

    Marrero, Josette Elizabeth; Saint Clair, Jason; Yates, Emma L.; Gore, Warren; Swanson, Andrew K.; Iraci, Laura T.; Hanisco, Thomas F.

    2016-01-01

    Formaldehyde (HCHO) is one of the most abundant oxygenated volatile organic compounds (VOCs) in the atmosphere, playing a role multiple atmospheric processes. Measurements of HCHO can be used to help quantify convective transport, the abundance of VOCs, and ozone production in urban environments. The Compact Formaldehyde FluorescencE Experiment (COFFEE) instrument uses Non-Resonant Laser Induced Fluorescence (NR-LIF) to detect trace concentrations of HCHO as part of the Alpha Jet Atmospheric eXperiment (AJAX) payload. Developed at NASA GSFC, COFFEE is a small, low maintenance instrument with a sensitivity of 100 pptv and a quick response time (1 sec). The COFFEE instrument has been customized to fit in an external wing pod on the Alpha Jet aircraft based at NASA ARC. The instrument can operate over a broad range of altitudes, from boundary layer to lower stratosphere, making it well suited for the Alpha Jet, which can access altitudes from the surface up to 40,000 ft. Results of the first COFFEE science flights preformed over the California's Central Valley will be presented. Boundary layer measurements and vertical profiles in the tropospheric column will both be included. This region is of particular interest, due to its elevated levels of HCHO, revealed in satellite images, as well as its high ozone concentrations. In addition to HCHO, the AJAX payload includes measurements of atmospheric ozone, methane, and carbon dioxide. Formaldehyde is one of the few urban pollutants that can be measured from space. Plans to compare in-situ COFFEE data with satellite-based HCHO observations such as those from OMI (Aura) and OMPS (SuomiNPP) will also be presented.

  6. A new system to reduce formaldehyde levels improves safety conditions during gross veterinary anatomy learning.

    Science.gov (United States)

    Nacher, Víctor; Llombart, Cristina; Carretero, Ana; Navarro, Marc; Ysern, Pere; Calero, Sebastián; Fígols, Enric; Ruberte, Jesús

    2007-01-01

    Dissection is a very useful method of learning veterinary anatomy. However, formaldehyde, which is widely used to preserve cadavers, is an irritant, and it has recently been classified as a carcinogen. In 1997, the Instituto Nacional de Seguridad e Higiene en el Trabajo [National Institute of Workplace Security and Hygiene] found that the levels of formaldehyde in our dissection room were above the threshold limit values. Unfortunately, no optimal substitute for formaldehyde is currently available. Therefore, we designed a new ventilation system that combines slow propulsion of fresh air from above the dissection table and rapid aspiration of polluted air from the perimeter. Formaldehyde measurements performed in 2004, after the introduction of this new system into our dissection laboratory, showed a dramatic reduction (about tenfold, or 0.03 ppm). A suitable propelling/aspirating air system successfully reduces the concentration of formaldehyde in the dissection room, significantly improving safety conditions for students, instructors, and technical staff during gross anatomy learning.

  7. Analysis of cocondensation of melamine and urea through carbon 13 enriched formaldehyde with C-13 nuclear magnetic resonance spectroscopy

    Science.gov (United States)

    Bunichiro Tomita; Chung-Yun Hse

    1995-01-01

    The urea-formaldehyde (UF) resins, melamine-formaldehyde (MF) resins, and melamine-ureaformaldehyde (MUF) cocondensed resins were synthesized using the labeling method with 13C enriched formaldehyde under neutral conditions and their 13C-NMR (nuclear magnetic resonance) spectra were analyzed. The remarkable down-field...

  8. 40 CFR 721.10190 - Formaldehyde, polymer with aliphatic diamine and phenol, reaction products with 4-methyl-2...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, polymer with aliphatic... Formaldehyde, polymer with aliphatic diamine and phenol, reaction products with 4-methyl-2-pentanone (generic... identified generically as formaldehyde, polymer with aliphatic diamine and phenol, reaction products with 4...

  9. 40 CFR 721.5560 - Formaldehyde, polymer with (chloromethyl) oxirane and phenol, reaction products with 6H-dibenz[c...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, polymer with... Formaldehyde, polymer with (chloromethyl) oxirane and phenol, reaction products with 6H-dibenz oxaphosphorin-6... identified as formaldehyde, polymer with (chloromethyl) oxirane and phenol, reaction products with 6H-dibenz...

  10. 40 CFR 721.3830 - Formaldehyde, reaction products with an alkylated phenol and an aliphatic amine (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Formaldehyde, reaction products with... CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.3830 Formaldehyde, reaction... new uses subject to reporting. (1) The chemical substance identified generically as Formaldehyde...

  11. 40 CFR 86.120-94 - Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement.

    Science.gov (United States)

    2010-07-01

    ... calibration; particulate, methanol and formaldehyde measurement. 86.120-94 Section 86.120-94 Protection of... Procedures § 86.120-94 Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement. (a) Sampling for particulate, methanol and formaldehyde emissions requires the use of gas meters...

  12. 40 CFR 86.1320-90 - Gas meter or flow instrumentation calibration; particulate, methanol, and formaldehyde measurement.

    Science.gov (United States)

    2010-07-01

    ... calibration; particulate, methanol, and formaldehyde measurement. 86.1320-90 Section 86.1320-90 Protection of... instrumentation calibration; particulate, methanol, and formaldehyde measurement. (a) Sampling for particulate, methanol and formaldehyde emissions requires the use of gas meters or flow instrumentation to determine...

  13. Glusoce-6-phosphate dehydrogenase- History and diagnosis

    Directory of Open Access Journals (Sweden)

    K Gautam

    2016-09-01

    Full Text Available Glucose-6-phosphate dehydrogenase deficiency is the most common enzymatic defect of red blood cells, which increases the vulnerability of erythrocytes to oxidative stress leading to hemolytic anemia. Since its identification more than 60 years ago, much has been done with respect to its clinical diagnosis, laboratory diagnosis and treatment. Association of G6PD is not just limited to anti malarial drugs, but a vast number of other diseases. In this article, we aimed to review the history of Glucose-6-phosphate dehydrogenase, the diagnostic methods available along with its association with other noncommunicable diseases. 

  14. Inducible xylitol dehydrogenases in enteric bacteria.

    OpenAIRE

    Doten, R C; Mortlock, R P

    1985-01-01

    Morganella morganii ATCC 25829, Providencia stuartii ATCC 25827, Serratia marcescens ATCC 13880, and Erwinia sp. strain 4D2P were found to induce a xylitol dehydrogenase when grown on a xylitol-containing medium. The xylitol dehydrogenases were partially purified from the four strains, and those from M. morganii ATCC 25829, P. stuartii ATCC 25827, and S. marcescens ATCC 13880 were all found to oxidize xylitol to D-xylulose. These three enzymes had KmS for xylitol of 7.1 to 16.4 mM and molecul...

  15. Deuterated Formaldehyde in the low mass protostar HH212

    Science.gov (United States)

    Sahu, Dipen; Minh, YC; Lee, Chin-Fei; Liu, Sheng-Yuan; Das, Ankan; Chakrabarti, SK; Sivaraman, Bhala

    2018-01-01

    HH212, a nearby (400 pc) object in Orion, is a Class 0 protostellar system with a Keplerian disk and collimated bipolar SiO jets. Deuterated water, HDO and a deuterated complex molecule, methanol (CH2DOH) have been reported in the source. Here, we report the HDCO (deuterated formaldehyde) line observation from ALMA data to probe the inner region of HH212. We compare HDCO line with other molecular lines to understand the possible chemistry and physics of the source. The distribution of HDCO emission suggests it may be associated with the base of the outflow. The emission also shows a rotation but it is not associated with the Keplerian rotation of disk or the rotating infalling envelope, rather it is associated with the outflow as previously seen in C34S. From the possible deuterium fractionation, we speculate that the gas phase formation of deuterated formaldehyde is active in the central hot region of the low-mass protostar system, HH212.

  16. Ayty: a New Line-List for Hot Formaldehyde

    Science.gov (United States)

    Al-Refaie, Ahmed Faris; Yurchenko, Sergei N.; Tennyson, Jonathan; Yachmenev, Andrey

    2015-06-01

    The ExoMol [1] project aims at providing spectroscopic data for key molecules that can be used to characterize the atmospheres of exoplanets and cool stars. Formaldehyde (H2CO) is of growing importance in studying and modelling terrestrial atmospheric chemistry and dynamics. It also has relevance in astrophysical phenomena that include interstellar medium abundance, proto-planetary and cometary ice chemistry and masers from extra-galactic sources. However there gaps in currently available absolute intensities and a lack of higher rotational excitations that makes it unfeasible to accurately model high temperature systems such as hot Jupiters. Here we present AYTY [2], a new line list for formaldehyde applicable to temperatures up to 1500 K. AYTY contains almost 10 million states reaching rotational excitations up to J=70 and over 10 billion transitions at up to 10 000 cm-1. The line list was computed using the variational ro-vibrational solver TROVE with a refined ab-initio potential energy surface and dipole moment surface. J.~Tennyson and S.~N. Yurchenko MNRAS, 425:21--33, 2012. A.~F. Al-Refaie, S.~N. Yurchenko, A.~Yachmenev, and J.~Tennyson MNRAS, 2015.

  17. Formaldehyde and Epigenetic Alterations: MicroRNA Changes in the Nasal Epithelium of Nonhuman Primates

    Science.gov (United States)

    Rager, Julia E.; Moeller, Benjamin C.; Doyle-Eisele, Melanie; Kracko, Dean; Swenberg, James A.

    2013-01-01

    Background: Formaldehyde is an air pollutant present in both indoor and outdoor atmospheres. Because of its ubiquitous nature, it is imperative to understand the mechanisms underlying formaldehyde-induced toxicity and carcinogenicity. MicroRNAs (miRNAs) can influence disease caused by environmental exposures, yet miRNAs are understudied in relation to formaldehyde. Our previous investigation demonstrated that formaldehyde exposure in human lung cells caused disruptions in miRNA expression profiles in vitro. Objectives: Using an in vivo model, we set out to test the hypothesis that formaldehyde inhalation exposure significantly alters miRNA expression profiles within the nasal epithelium of nonhuman primates. Methods: Cynomolgus macaques were exposed by inhalation to approximately 0, 2, or 6 ppm formaldehyde for 6 hr/day for 2 consecutive days. Small RNAs were extracted from nasal samples and assessed for genome-wide miRNA expression levels. Transcriptional targets of formaldehyde-altered miRNAs were computationally predicted, analyzed at the systems level, and assessed using real-time reverse transcriptase polymerase chain reaction (RT-PCR). Results: Expression analysis revealed that 3 and 13 miRNAs were dysregulated in response to 2 and 6 ppm formaldehyde, respectively. Transcriptional targets of the miRNA with the greatest increase (miR-125b) and decrease (miR-142-3p) in expression were predicted and analyzed at the systems level. Enrichment was identified for miR-125b targeting genes involved in apoptosis signaling. The apoptosis-related targets were functionally tested using RT-PCR, where all targets showed decreased expression in formaldehyde-exposed samples. Conclusions: Formaldehyde exposure significantly disrupts miRNA expression profiles within the nasal epithelium, and these alterations likely influence apoptosis signaling. PMID:23322811

  18. Development of Formaldehyde Adsorption using Modified Activated Carbon – A Review

    Directory of Open Access Journals (Sweden)

    W.D.P Rengga

    2012-11-01

    Full Text Available Gas storage is a technology developed with an adsorptive storage method, in which gases are stored as adsorbed components on the certain adsorbent. Formaldehyde is one of the major indoor gaseous pollutants. Depending on its concentration, formaldehyde may cause minor disorder symptoms to a serious injury. Some of the successful applications of technology for the removal of formaldehyde have been reported. However, this paper presents an overview of several studies on the elimination of formaldehyde that has been done by adsorption method because of its simplicity. The adsorption method does not require high energy and the adsorbent used can be obtained from inexpensive materials. Most researchers used activated carbon as an adsorbent for removal of formaldehyde because of its high adsorption capacity. Activated carbons can be produced from many materials such as coals, woods, or agricultural waste. Some of them were prepared by specific activation methods to improve the surface area. Some researchers also used modified activated carbon by adding specific additive to improve its performance in attracting formaldehyde molecules. Proposed modification methods on activation and additive impregnated carbon are thus discussed in this paper for future development and improvement of formaldehyde adsorption on activated carbon. Specifically, a waste agricultural product is chosen for activated carbon raw material because it is renewable and gives an added value to the materials. The study indicates that the performance of the adsorption of formaldehyde might be improved by using modified activated carbon. Bamboo seems to be the most appropriate raw materials to produce activated carbon combined with applying chemical activation method and addition of metal oxidative catalysts such as Cu or Ag in nano size particles. Bamboo activated carbon can be developed in addition to the capture of formaldehyde as well as the storage of adsorptive hydrogen gas that

  19. Aldehyde dehydrogenases and cell proliferation.

    Science.gov (United States)

    Muzio, G; Maggiora, M; Paiuzzi, E; Oraldi, M; Canuto, R A

    2012-02-15

    Aldehyde dehydrogenases (ALDHs) oxidize aldehydes to the corresponding carboxylic acids using either NAD or NADP as a coenzyme. Aldehydes are highly reactive aliphatic or aromatic molecules that play an important role in numerous physiological, pathological, and pharmacological processes. ALDHs have been discovered in practically all organisms and there are multiple isoforms, with multiple subcellular localizations. More than 160 ALDH cDNAs or genes have been isolated and sequenced to date from various sources, including bacteria, yeast, fungi, plants, and animals. The eukaryote ALDH genes can be subdivided into several families; the human genome contains 19 known ALDH genes, as well as many pseudogenes. Noteworthy is the fact that elevated activity of various ALDHs, namely ALDH1A2, ALDH1A3, ALDH1A7, ALDH2*2, ALDH3A1, ALDH4A1, ALDH5A1, ALDH6, and ALDH9A1, has been observed in normal and cancer stem cells. Consequently, ALDHs not only may be considered markers of these cells, but also may well play a functional role in terms of self-protection, differentiation, and/or expansion of stem cell populations. The ALDH3 family includes enzymes able to oxidize medium-chain aliphatic and aromatic aldehydes, such as peroxidic and fatty aldehydes. Moreover, these enzymes also have noncatalytic functions, including antioxidant functions and some structural roles. The gene of the cytosolic form, ALDH3A1, is localized on chromosome 17 in human beings and on the 11th and 10th chromosome in the mouse and rat, respectively. ALDH3A1 belongs to the phase II group of drug-metabolizing enzymes and is highly expressed in the stomach, lung, keratinocytes, and cornea, but poorly, if at all, in normal liver. Cytosolic ALDH3 is induced by polycyclic aromatic hydrocarbons or chlorinated compounds, such as 2,3,7,8-tetrachlorodibenzo-p-dioxin, in rat liver cells and increases during carcinogenesis. It has been observed that this increased activity is directly correlated with the degree of

  20. Genetics Home Reference: glucose-6-phosphate dehydrogenase deficiency

    Science.gov (United States)

    ... deficiency Encyclopedia: Glucose-6-phosphate dehydrogenase test Encyclopedia: Hemolytic anemia Encyclopedia: Newborn jaundice Health Topic: Anemia Health Topic: G6PD Deficiency Health Topic: Newborn Screening Genetic and Rare Diseases Information Center (1 link) Glucose-6-phosphate dehydrogenase ...

  1. Malaria Protection In Glucose-6-Phosphate Dehydrogenase ...

    African Journals Online (AJOL)

    The high frequency of glucose-6-phosphate dehydrogenase (G6PD) deficiency gene in malaria endemic regions is believed to be due to the enzyme deficiency advantage against fatal malaria. However, the mechanism of this protection is not well understood and therefore was investigated by comparing differences in ...

  2. Coenzyme and effector binding to glutamate dehydrogenase

    NARCIS (Netherlands)

    Zantema, Alt

    1979-01-01

    Glutamaat-dehydrogenase is een enzym dat de reactie katalyseert van 2-oxoglutaraat (substraat), NAD(P)H (co-enzym) en ammonia naar L-glutaminezuur en NAD(P)+. Het enzym is opgebouwd uit 6 identieke subeenheden. Dit proefschrift beschrijft de bestudering van twee aspecten van dit enzym, nl. 1. de

  3. Optimization of Adsorptive Immobilization of Alcohol Dehydrogenases

    NARCIS (Netherlands)

    Trivedi, Archana; Heinemann, Matthias; Spiess, Antje C.; Daussmann, Thomas; Büchs, Jochen

    2005-01-01

    In this work, a systematic examination of various parameters of adsorptive immobilization of alcohol dehydrogenases (ADHs) on solid support is performed and the impact of these parameters on immobilization efficiency is studied. Depending on the source of the enzymes, these parameters differently

  4. Effects of herbal infusions, tea and carbonated beverages on alcohol dehydrogenase and aldehyde dehydrogenase activity.

    Science.gov (United States)

    Li, Sha; Gan, Li-Qin; Li, Shu-Ke; Zheng, Jie-Cong; Xu, Dong-Ping; Li, Hua-Bin

    2014-01-01

    Various alcoholic beverages containing different concentrations of ethanol are widely consumed, and excessive alcohol consumption may result in serious health problems. The consumption of alcoholic beverages is often accompanied by non-alcoholic beverages, such as herbal infusions, tea and carbonated beverages to relieve drunk symptoms. The aim of this study was to supply new information on the effects of these beverages on alcohol metabolism for nutritionists and the general public, in order to reduce problems associated with excessive alcohol consumption. The effects of 57 kinds of herbal infusions, tea and carbonated beverages on alcohol dehydrogenase and aldehyde dehydrogenase activity were evaluated. Generally, the effects of these beverages on alcohol dehydrogenase and aldehyde dehydrogenase activity are very different. The results suggested that some beverages should not be drank after excessive alcohol consumption, and several beverages may be potential dietary supplements for the prevention and treatment of problems related to excessive alcohol consumption.

  5. Observations of Carbon Isotopic Fractionation in Interstellar Formaldehyde

    Science.gov (United States)

    Wirstrom, E. S.; Charnley, S. B.; Geppert, W. D.; Persson, C. M.

    2012-01-01

    Primitive Solar System materials (e.g. chondrites. IDPs, the Stardust sample) show large variations in isotopic composition of the major volatiles (H, C, N, and O ) even within samples, witnessing to various degrees of processing in the protosolar nebula. For ex ample. the very pronounced D enhancements observed in IDPs [I] . are only generated in the cold. dense component of the interstellar medium (ISM), or protoplanetary disks, through ion-molecule reactions in the presence of interstellar dust. If this isotopic anomaly has an interstellar origin, this leaves open the possibility for preservation of other isotopic signatures throughout the form ation of the Solar System. The most common form of carbon in the ISM is CO molecules, and there are two potential sources of C-13 fractionation in this reservoir: low temperature chemistry and selective photodissociation. While gas-phase chemistry in cold interstellar clouds preferentially incorporates C-13 into CO [2], the effect of self-shielding in the presence of UV radiation instead leads to a relative enhancement of the more abundant isotopologue, 12CO. Solar System organic material exhibit rather small fluctuations in delta C-13 as compared to delta N-15 and delta D [3][1], the reason for which is still unclear. However, the fact that both C-13 depleted and enhanced material exists could indicate an interstellar origin where the two fractionation processes have both played a part. Formaldehyde (H2CO) is observed in the gas-phase in a wide range of interstellar environments, as well as in cometary comae. It is proposed as an important reactant in the formation of more complex organic molecules in the heated environments around young stars, and formaldehyde polymers have been suggested as the common origin of chondritic insoluable organic matter (IOM) and cometary refractory organic solids [4]. The relatively high gas-phase abundance of H2CO observed in molecular clouds (10(exp- 9) - 10(exp- 8) relative to H2) makes

  6. Role of Moving Bed Biofilm Reactor and Sequencing Batch Reactor in Biological Degradation of Formaldehyde Wastewater

    Directory of Open Access Journals (Sweden)

    B. Ayati

    2011-10-01

    Full Text Available Nowadays formaldehyde is used as raw material in many industries. It has also disinfection applications in some public places. Due to its toxicity for microorganisms, chemical or anaerobic biological methods are applied for treating wastewater containing formaldehyde.In this research, formaldehyde removal efficiencies of aerobic biological treatment systems including moving bed biofilm (MMBR and sequencing batch reactors (SBR were investigated. During all experiments, the efficiency of SBR was more than MBBR, but the difference was not significant statistically. According to the results, the best efficiencies were obtained for influent formaldehyde COD of 200 mg/L in MBBR and SBR which were 93% and 99.4%, respectively. The systems were also capable to treat higher formaldehyde concentrations (up to 2500 mg/L with lower removal efficiency. The reaction kinetics followed the Stover-Kincannon second order model. The gram-positive and gram-negative bacillus and coccus as well as the gram-positive binary bacillus were found to be the most dominant species. The results of 13C-NMR analysis have shown that formaldehyde and urea were converted into N-{[(aminocarbonyl amino] methyl}urea and the residual formaldehyde was polymerized at room temperature.

  7. Determination of carbonyl compounds (acetaldehyde and formaldehyde in polyethylene terephthalate containers designated for water conservation

    Directory of Open Access Journals (Sweden)

    Redžepović Azra S.

    2012-01-01

    Full Text Available Polyethylene terephthalate (PET has in the last several years become the main packaging material for many food products, particularly carbonated beverages and bottled water, as well as for products of chemical industry (packaging of various hygiene maintenance agents, pesticides, solvents, etc.. The strength and permeability properties of PET are very good for packaging of beverages, its resistance to chemicals is high and it has a high degree of transparency. Acetaldehyde and formaldehyde are formed during the thermoforming of PET containers. After cooling, acetaldehyde and formaldehyde remain trapped in the walls of a PET bottle and may migrate into the water after filling and storage. Since there are no migration tests in Serbia prescribed for the determination of acetaldehyde and formaldehyde, the purpose of the paper is to test the quantitative contents of carbonyl compounds (acetaldehyde and formaldehyde in PET containers of different volumes, made by various manufacturers of bottled mineral carbonated and noncarbonated water, and exposed to different temperatures. In this study, the migration of acetaldehyde and formaldehyde from PET bottles into mineral carbonated and noncarbonated water was determined by high performance liquid chromatography. Taking into consideration that formaldehyde and acetaldehyde have no UV active or fluorescent group, the chromatography shall be preceded by derivatization in a closed system (due to a low boiling point of acetaldehyde and formaldehyde, which shall transform carbonyl compounds into UV active compounds.

  8. Removal of formaldehyde by adsorption and plasma treatment of mineral adsorbent

    Science.gov (United States)

    Saulich, K.; Müller, S.

    2013-01-01

    Formaldehyde is a harmful ambient air pollutant which can be produced by incomplete combustion processes, e.g. in power plants or automobiles. In this work a cycled adsorption and discharge process using mineral granulate in a packed bed dielectric barrier discharge plasma reactor was applied for formaldehyde (99 ppm) removal from gas streams. The mineral granulate used consisted of 80% halloysite and showed a good adsorption capacity for formaldehyde. In the discharge step, the adsorbed formaldehyde molecules were decomposed to COx and hydrocarbons in a N2 plasma at a low input discharge power of 2.2 W. The decomposition performance on adsorbed formaldehyde molecules was studied depending on space-time, a specific oxygen fraction of the carrier gas and the influence of temperature. With rising N2 space times in the discharge area, the total amount of decomposed formaldehyde molecules increased and the decomposition reaction mechanism shifted to CO2 formation. An oxygen fraction in the carrier gas further raised the oxidized amount of formaldehyde to CO2. The mineral granulate showed satisfied regeneration ability during the cycled plasma process.

  9. Therapeutic role of curcumin in oxidative DNA damage caused by formaldehyde.

    Science.gov (United States)

    Ciftci, Gulay; Aksoy, Abdurrahman; Cenesiz, Sena; Sogut, Mehtap Unlu; Yarim, Gul Fatma; Nisbet, Cevat; Guvenc, Dilek; Ertekin, Ali

    2015-05-01

    Formaldehyde is a common environmental contaminant that causes oxidative DNA damage in cells by increasing the production of reactive oxygen species. The aim of this study was to investigate the amount of 8-hydroxy-deoxyguanosine (8-OhdG), tumor protein 53(TP53), beta-amyloid[Aß(1-42), Aß (1-40)], total antioxidant capacity (TAC) and malondialdehyde (MDA) and the therapeutic role of curcumin in rat cells with oxidative DNA damage caused by formaldehyde. The control group was given physiological saline for 15 days (i.p.) and the second group was given 37% formaldehyde (i.p.) at a dose of 9 mg/kg group every other day. The third group was given 9 mg/kg formaldehyde (i.p.) every other day and treated therapeutically with 100 mg/kg curcumin every day by gavage. At the end of the trial period, urine, blood, and brain tissue was collected from the rats. The levels of MDA in sera were increased and the TAC, TP53, and Aß (1-40) levels were reduced in the formaldehyde-treated group with respect to the control group (pformaldehyde-treated group and reduced after treatment with curcumin (P formaldehyde-treated group (P  0.05). In conclusion, the oxidative stress caused by formaldehyde exposure was reduced with the application of curcumin. © 2015 Wiley Periodicals, Inc.

  10. Plasma Level Formaldehyde in Children Receiving Pulpotomy Treatment under General Anesthesia.

    Science.gov (United States)

    Bagrizan, Majid; Pourgolshani, Pouya; Hosseinpour, Sepanta; Jalalpour, Golnoush; Shahrestani, Mostafa Zahmatkesh

    Formocresol has long been used by dentists for pulpotomy of primary teeth. Due to some concerns regarding its possible carcinogenicity, formocresol has been the topic of numerous studies. This study sought to assess the changes in plasma level of formaldehyde of children after receiving pulpotomy under general anesthesia. Twenty-five children between 2-6 years requiring dental treatments under general anesthesia were studied. Blood samples were taken of children before and after the procedure. Plasma level of formaldehyde was measured using high performance liquid chromatography (HPLC). A total of 106 pulpotomy treatments were performed in 25 children using 126 cotton pellets dipped in formocresol. An increase and a decrease in plasma level of formaldehyde were noted in 5 (20%) and 20 (80%) children, respectively post-operatively compared to baseline. The t-test showed no significant difference in plasma level of formaldehyde pre- and postoperatively (P=0.12). the plasma level of formaldehyde in children who had higher levels of formaldehyde prior to the operation was also higher than that of others after the operation and this association was statistically significant (P=0.001, r=0.64). The results showed no significant change in the mean plasma level of formaldehyde in children who received pulpotomy under general anesthesia compared to its baseline value.

  11. The Roles of Formaldehyde Exposure and Oxidative Stress in Fetal Growth in the Second Trimester.

    Science.gov (United States)

    Amiri, Azita; Turner-Henson, Anne

    To examine the relationship between formaldehyde exposure and fetal growth in the second trimester and the potential mediating role of oxidative stress in this relationship. A cross-sectional study was conducted. The participants were recruited from one university-related clinic and two private obstetrics and gynecology offices in the Southeastern United States. A convenience sample of 140 healthy pregnant women in the second trimester of pregnancy was enrolled from November 2013 through June 2014. Formaldehyde exposure was measured via vapor monitors worn by the participants for 24 hours. One-time urine samples were collected during a routine prenatal visit to measure the level of 15-isoprostane F 2t and cotinine as biomarkers of oxidative stress and tobacco smoking, respectively. Urine creatinine was measured to standardize the cotinine and 15-isoprostane F 2t levels. Eighty-eight participants (63%) returned their formaldehyde monitors. The linear regression model showed that the dichotomized level of formaldehyde exposure (0.03 ppm) was a significant predictor of biparietal diameter percentile after controlling for maternal race (p formaldehyde exposure and biparietal diameter was not confirmed. A relationship was found between formaldehyde exposure and biparietal diameter in the second trimester. Although further research is necessary to confirm the results of this study, nurses may consider advising pregnant women to limit their exposure to formaldehyde during pregnancy. Copyright © 2017 AWHONN, the Association of Women’s Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights reserved.

  12. Novel silicone-based polymer containing active methylene designed for the removal of indoor formaldehyde.

    Science.gov (United States)

    Niu, Song; Yan, Hongxia

    2015-04-28

    Indoor air pollution is caused inevitably due to complicated home decoration, in which formaldehyde is one of the most typical pollutants. It will be a convenient, economical and effective strategy to remove indoor formaldehyde if imparting a feature of formaldehyde removal to decorative coatings. We have successfully explored a novel silicone-based polymer containing active methylene used as a formaldehyde absorbent in coatings via a straightforward transesterification process using inexpensive and easily available chemicals. The polymer has been characterized by (13)C NMR, FTIR, GC and GPC. Formaldehyde removal capacity of the coating films containing different contents of the polymer has been investigated. The results indicated that coatings incorporating 4wt% of the polymer could make the coating films exhibit significant improvement on formaldehyde removal including purificatory performance (>85%) and durability of purificatory effect (>60%), compared to those consisting of absorbents without any silicon, and improve yellowing resistance performance, while other properties, such as gloss, adhesion, pencil hardness, flexibility and impact resistance, were kept almost unaffected. The chemical absorption process of the silicone-based polymer filled in interior decorative coatings is demonstrated as a promising technology to purify indoor formaldehyde and thus can reduce the harm to individuals. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Standard formaldehyde source for chamber testing of material emissions: model development, experimental evaluation, and impacts of environmental factors.

    Science.gov (United States)

    Wei, Wenjuan; Howard-Reed, Cynthia; Persily, Andrew; Zhang, Yinping

    2013-07-16

    Formaldehyde, which is recognized as a harmful indoor air pollutant for human health, is emitted mainly from urea-formaldehyde resin in wood products. Chamber tests are used to evaluate formaldehyde emission rates from these products. However, there is no available formaldehyde standard reference emission source to assess the performance of chamber testing systems. In this work, a LIFE (liquid-inner tube diffusion-film-emission) formaldehyde reference is described. The formaldehyde source consists of a polytetrafluoroethene (PTFE) tube that holds a formaldehyde-water solution with a concentration of 16 g formaldehyde per 100 mL water, with a thin polydimethylsiloxane (PDMS) film cover. Formaldehyde emission parameters for the PDMS film (diffusion coefficient and partition coefficient) were determined experimentally, thereby enabling the prediction of the formaldehyde emissions from the source for use as a reference value in a chamber. Chamber tests were conducted in a 51 L stainless steel ventilated chamber. The impacts of temperature and relative humidity on the emissions were investigated. Results show the LIFE's chamber test results match those predicted by a mass transfer model. As a result, this formaldehyde source may be used to generate a reference concentration in product emission testing chambers, thereby providing a powerful tool to evaluate the performance of the chamber testing systems.

  14. Quantification of free formaldehyde in carrageenan and processed Eucheuma seaweed using high-performance liquid chromatography.

    Science.gov (United States)

    Hornshøj, Bettina Høj; Kobbelgaard, Sara; Blakemore, William R; Stapelfeldt, Henrik; Bixler, Harris J; Klinger, Markus

    2015-01-01

    In 2010 the European Commission placed a limit on the amount of free formaldehyde in carrageenan and processed Eucheuma seaweed (PES) of 5 mg kg(-1). Formaldehyde is not used in carrageenan and PES processing and accordingly one would not expect free formaldehyde to be present in carrageenan and PES. However, surprisingly high levels up to 10 mg kg(-1) have been found using the generally accepted AOAC and Hach tests. These findings are, per proposed reaction pathways, likely due to the formation of formaldehyde when sulphated galactose, the backbone of carrageenan, is hydrolysed with the strong acid used in these conventional tests. In order to minimise the risk of false-positives, which may lead to regulatory non-compliance, a new high-performance liquid chromatography (HPLC) method has been developed. Initially, carrageenan or PES is extracted with 2-propanol and subsequently reacted with 2,4-dinitrophenylhydrazine (DNPH) to form the chromophore formaldehyde-DNPH, which is finally quantified by reversed-phase HPLC with ultraviolet light detection at 355 nm. This method has been found to have a limit of detection of 0.05 mg kg(-1) and a limit of quantification of 0.2 mg kg(-1). Recoveries from samples spiked with known quantities of formaldehyde were 95-107%. Using this more specific technique, 20 samples of carrageenan and PES were tested for formaldehyde. Only one sample had a detectable content of formaldehyde (0.40 mg kg(-1)), thus demonstrating that the formaldehyde content of commercial carrageenan and PES products are well below the European Commission maximum limit of 5 mg kg(-1).

  15. The protective effect of geniposide on human neuroblastoma cells in the presence of formaldehyde

    Science.gov (United States)

    2013-01-01

    Background Formaldehyde can induce misfolding and aggregation of Tau protein and β amyloid protein, which are characteristic pathological features of Alzheimer’s disease (AD). An increase in endogenous formaldehyde concentration in the brain is closely related to dementia in aging people. Therefore, the discovery of effective drugs to counteract the adverse impact of formaldehyde on neuronal cells is beneficial for the development of appropriate treatments for age-associated cognitive decline. Methods In this study, we assessed the neuroprotective properties of TongLuoJiuNao (TLJN), a traditional Chinese medicine preparation, against formaldehyde stress in human neuroblastoma cells (SH-SY5Y cell line). The effect of TLJN and its main ingredients (geniposide and ginsenoside Rg1) on cell viability, apoptosis, intracellular antioxidant activity and the expression of apoptotic-related genes in the presence of formaldehyde were monitored. Results Cell counting studies showed that in the presence of TLJN, the viability of formaldehyde-treated SH-SY5Y cells significantly recovered. Laser scanning confocal microscopy revealed that the morphology of formaldehyde-injured cells was rescued by TLJN and geniposide, an effective ingredient of TLJN. Moreover, the inhibitory effect of geniposide on formaldehyde-induced apoptosis was dose-dependent. The activity of intracellular antioxidants (superoxide dismutase and glutathione peroxidase) increased, as did mRNA and protein levels of the antiapoptotic gene Bcl-2 after the addition of geniposide. In contrast, the expression of the apoptotic-related gene - P53, apoptotic executer - caspase 3 and apoptotic initiator - caspase 9 were downregulated after geniposide treatment. Conclusions Our results indicate that geniposide can protect SH-SY5Y cells against formaldehyde stress through modulating the expression of Bcl-2, P53, caspase 3 and caspase 9, and by increasing the activity of intracellular superoxide dismutase and glutathione

  16. Formation, Accumulation, and Hydrolysis of Endogenous and Exogenous Formaldehyde-Induced DNA Damage

    Science.gov (United States)

    Yu, Rui; Lai, Yongquan; Hartwell, Hadley J.; Moeller, Benjamin C.; Doyle-Eisele, Melanie; Kracko, Dean; Bodnar, Wanda M.; Starr, Thomas B.; Swenberg, James A.

    2015-01-01

    Formaldehyde is not only a widely used chemical with well-known carcinogenicity but is also a normal metabolite of living cells. It thus poses unique challenges for understanding risks associated with exposure. N2-hydroxymethyl-dG (N2-HOMe-dG) is the main formaldehyde-induced DNA mono-adduct, which together with DNA-protein crosslinks (DPCs) and toxicity-induced cell proliferation, play important roles in a mutagenic mode of action for cancer. In this study, N2-HOMe-dG was shown to be an excellent biomarker for direct adduction of formaldehyde to DNA and the hydrolysis of DPCs. The use of inhaled [13CD2]-formaldehyde exposures of rats and primates coupled with ultrasensitive nano ultra performance liquid chromatography-tandem mass spectrometry permitted accurate determinations of endogenous and exogenous formaldehyde DNA damage. The results show that inhaled formaldehyde only reached rat and monkey noses, but not tissues distant to the site of initial contact. The amounts of exogenous adducts were remarkably lower than those of endogenous adducts in exposed nasal epithelium. Moreover, exogenous adducts accumulated in rat nasal epithelium over the 28-days exposure to reach steady-state concentrations, followed by elimination with a half-life (t1/2) of 7.1 days. Additionally, we examined artifact formation during DNA preparation to ensure the accuracy of nonlabeled N2-HOMe-dG measurements. These novel findings provide critical new data for understanding major issues identified by the National Research Council Review of the 2010 Environmental Protection Agency’s Draft Integrated Risk Information System Formaldehyde Risk Assessment. They support a data-driven need for reflection on whether risks have been overestimated for inhaled formaldehyde, whereas underappreciating endogenous formaldehyde as the primary source of exposure that results in bone marrow toxicity and leukemia in susceptible humans and rodents deficient in DNA repair. PMID:25904104

  17. Tunneling corrections to unimolecular rate constants, with application to formaldehyde

    International Nuclear Information System (INIS)

    Miller, W.H.

    1979-01-01

    Tunneling corrections to the rate constant for unimolecular reactions in an isolated molecule are treated within the standard transition state (i.e., RRKM) theory of such processes. The microcanonical distribution relevant to the unimolecular case causes tunneling effects to enter in a somewhat more complicated fashion than in the analogous transition-state theory for thermally averaged bimolecular rate constants; e.g., even within the separable approximation they do not enter as simply a multiplicative correction factor. Application of the theoretical expressions to some unimolecular processes (H 2 CO → H 2 + CO, trans-HCOH → H 2 CO) of interest in the collisionless photochemistry of formaldehyde indicates that tunneling effects are quite significant for rates of 10 9 s -1 or slower. Isotope effects are also considered and seen to be quite interesting. 4 figures, 1 table

  18. Studies of Deactivation of Methanol to Formaldehyde Selective Oxidation Catalyst

    DEFF Research Database (Denmark)

    Raun, Kristian Viegaard; Schumann, Max; Høj, Martin

    as the Formox process [1]. The average lifetime of the industrial catalyst is only 1–2 years depending on the operating conditions. The catalyst consists of a bulk phase of Fe2(MoO4)3 and a surface layer phase of MoO3. The MoO3 surfaceis selective towards formaldehyde while the iron in the sublayer increases...... the activity of the catalyst [2]. Pure MoO3 in itself has low activity. Literature from the last decades agrees that the major reason for the deactivation is loss of molybdenum from the catalyst. Molybdenum forms volatile species with methanol, which can leave behind Mo poor zones. The catalyst is usually...... prepared with excess MoO3 (Mo/Fe > 1.5) to counter the loss of Mo. This work focuses on understanding the structural changes occurring in the catalyst and its behavior during deactivation via prolonged activity testing and spectroscopic investigations....

  19. Assessment of the systemic distribution and toxicity of formaldehyde following pulpotomy treatment: Part one

    Energy Technology Data Exchange (ETDEWEB)

    Ranly, D.M.

    1985-11-01

    This report, the first of a two-part study, was undertaken to quantitate the systemic distribution of formaldehyde from a pulpotomy site, and to compare this level to doses that elicit overt systemic pathology. Maxillary first molars of rats were pulpotomized and treated with 14C-labeled formaldehyde, for 5 minutes. Additionally, four groups of rats were infused with 10, 20, 30, or 50 percent of the first quantity applied to the site. The data show that approximately 30 percent of the 14C-formaldehyde placed in the pulp chamber was distributed systemically; 50 percent to 59 percent was expired as CO2; and 2 percent was excreted.

  20. Early Morning Concentrations of Formaldehyde and Carbon Monoxide in Milano Measured with the Mobile Pollutant Lab

    Energy Technology Data Exchange (ETDEWEB)

    Prevot, A.S.H.; Ordonez, C.; Richer, R.; Junkermann, W. [Forschungszentrum Karlsruhe (Georgia)

    2004-03-01

    Within the EU project FORMAT (Formaldehyde as a tracer of oxidation in the troposphere) measurements were performed in the Po basin around Milano, Italy. Mobile measurements in the centre of Milano in the early morning allowed the determination of the emission ratios of formaldehyde and carbon monoxide. The slope derived from the correlation of measured HCHO and CO was about a factor of 8 lower than the emission ratio of the available emission inventory. This analysis will finally allow a better estimation of primary versus secondary formaldehyde in this region. (author)

  1. PRODUCTION OF HIGH DENSITY PARTICLEBOARD USING MELAMINE-UREA-FORMALDEHYDE RESIN

    Directory of Open Access Journals (Sweden)

    Setsuo Iwakiri

    2005-12-01

    Full Text Available This research was developed aiming to evaluate the effects of board density and melamine-urea-formaldehyde resin onthe properties of particleboard for semi-structural applications. The boards were manufactured with nominal density of 0.65 g/cm³and 0.90 g/cm³ using urea-formaldehyde resin as control and melamine-urea-formaldehyde. The results showed a better dimensionallystability and mechanical properties of the boards manufactured with higher density and MUF resin content. The fine furnish usedfor external layer of particleboard in the industrial process, could be used for high density homogeneous board to semi-strucuturaluses, such as flooring applications.

  2. Successful reduction of morticians' exposure to formaldehyde during embalming procedures.

    Science.gov (United States)

    Hiipakka, D W; Dyrdahl, K S; Garcia Cardenas, M

    2001-01-01

    A case study of the effectiveness of upgraded ventilation engineering controls in a military mortuary facility was performed. Worst-case mortician formaldehyde exposures generated during the use of highly concentrated embalming fluid (required to meet a 2-week preservation standard for overseas case processing and return of the deceased to the continental United States) were documented. A detailed exposure evaluation via consecutive short-term exposure limit (STEL) samples facilitated characterization of the hazard potential for each distinct phase of the embalming process. After baseline screening with 3M passive formaldehyde dosimeters, a total of 145 personal and area STEL sorbent tube samples were collected during six embalming cases between 1994 and 1998. Prior to the installation of local exhaust ventilation controls, personal time-weighted average (TWA) exposure values during embalming activities were 3.19-7.69 ppm for a mean of 4.80 ppm (calculated 8-hour TWA exposures for mortician workshifts were 1.32-2.86 ppm, mean 1.93 ppm). Initial STEL exposures ranged from a low of 0.14 during preembalming body preparation to 20.89 ppm during aspiration of arterial fluids (mean = 4.16 ppm). Embalming room general area samples revealed a mean concentration of 0.76 ppm. With ventilation upgrades installed in 1997, calculated personal 8-hour TWA exposure values during embalming procedures were reduced. STEL exposures decreased to between 0.11 to 3.44 ppm (mean of 0.55 ppm); embalming room general area sample concentrations decreased to a mean of 0.089 ppm. Because occasional 15-min peak exposures continued to exceed the 2.0 ppm Occupational Safety and Health Administration STEL during tasks involving large volumes of embalming fluid or direct contact with paraformaldehyde preservative powders, general room ventilation was further upgraded to 25 room air changes per hour.

  3. SCIAMACHY formaldehyde observations: constraint for isoprene emission estimates over Europe?

    Directory of Open Access Journals (Sweden)

    G. Dufour

    2009-03-01

    Full Text Available Formaldehyde (HCHO is an important intermediate compound in the degradation of volatile organic compounds (VOCs in the troposphere. Sources of HCHO are largely dominated by its secondary production from VOC oxidation, methane and isoprene being the main precursors in unpolluted areas. As a result of the moderate lifetime of HCHO, its spatial distribution is determined by reactive hydrocarbon emissions. We focus here on Europe and investigate the influence of the different emissions on HCHO tropospheric columns with the CHIMERE chemical transport model in order to interpret the comparisons between SCIAMACHY and simulated HCHO columns. Europe was never specifically studied before for these purposes using satellite observations. The bias between measurements and model is less than 20% on average. The differences are discussed according to the errors on the model and the observations and remaining discrepancies are attributed to a misrepresentation of biogenic emissions. This study requires the characterisation of: (1 the model errors and performances concerning formaldehyde. The errors on the HCHO columns, mainly related to chemistry and mixed emission types, are evaluated to 2×1015 molecule/cm2 and the model performances evaluated using surface measurements are satisfactory (~13%; (2 the observation errors that define the needs in spatial and temporal averaging for meaningful comparisons. Using SCIAMACHY observations as constraint for biogenic isoprene emissions in an inverse modelling scheme reduces their uncertainties by about a factor of two in region of intense emissions. The retrieved correction factors for the isoprene emissions range from a factor of 0.15 (North Africa to a factor of 2 (Poland, the United Kingdom depending on the regions.

  4. Cohort mortality study of garment industry workers exposed to formaldehyde: update and internal comparisons.

    Science.gov (United States)

    Meyers, Alysha R; Pinkerton, Lynne E; Hein, Misty J

    2013-09-01

    To further evaluate the association between formaldehyde and leukemia, we extended follow-up through 2008 for a cohort mortality study of 11,043 US formaldehyde-exposed garment workers. We computed standardized mortality ratios and standardized rate ratios stratified by year of first exposure, exposure duration, and time since first exposure. Associations between exposure duration and rates of leukemia and myeloid leukemia were further examined using Poisson regression models. Compared to the US population, myeloid leukemia mortality was elevated but overall leukemia mortality was not. In internal analyses, overall leukemia mortality increased with increasing exposure duration and this trend was statistically significant. We continue to see limited evidence of an association between formaldehyde and leukemia. However, the extended follow-up did not strengthen previously observed associations. In addition to continued epidemiologic research, we recommend further research to evaluate the biological plausibility of a causal relation between formaldehyde and leukemia. Copyright © 2013 Wiley Periodicals, Inc.

  5. MINIMIZE THE HYDROGENATION OF UNSATURATED FATTY ACID IN RUMEN WITH FORMALDEHYDE

    Directory of Open Access Journals (Sweden)

    Nafly C. Tiven

    2011-07-01

    Full Text Available This research aimed to know the ability of formaldehyde to protect unsaturated fatty acid of CPO on the hydrogenation process by rumen microbes. In this experiment, the in vitro fermentation of rumen fluid was carrying out. It was taken from the rumen-trocar of female sheep. The unsaturated fatty acid source was from CPO (Crude Palm Oil which encapsulated by formaldehyde 37% within 0%, 1%, 2% and 3%. The data was analyzed by Completely Random Design with Duncan's New Multiple Range Test. The difference of means the treatments were tested by Duncan's New Multiple Range Test. Result showed that oleic and linoleic resulting from fermenting CPO protected by formaldehyde was increase if it was compared with the unprotected CPO. It can be concluded that encapsulated CPO with formaldehyde was able to prevent hydrogenating of unsaturated fatty acid, mainly oleic and linoleic.

  6. Localization of formaldehyde production during frozen storage of European hake ( Merluccius merluccius )

    DEFF Research Database (Denmark)

    Rey-Mansilla, M.D.; Sotelo, C.G.; Aubourg, S.P.

    2001-01-01

    The formation of dimethylamine and formaldehyde from trimethylamine N-oxide by the enzyme trimethylamine N-oxide demethylase in whole hake during frozen storage was studied. The objective was to check if there were parts of the muscle with a higher production of dimethylamine and formaldehyde...... the viscera, and the tail. The second variable was the temperature of storage, -11 degreesC or -18 degreesC. Finally, the influence of kidneys during storage, comparing fish with and without kidneys, was also evaluated. No differences were found in dimethylamine and formaldehyde production between fish...... with and without kidneys stored at -18 degreesC. However at -11 degreesC the amounts of dimethylamine and formaldehyde detected in fish without kidneys were, in some cases, higher than in those with kidneys. Kidney removal does not have a statistically significant influence on DMA and FA production in frozen...

  7. FIAM-pwp-Formaldehyde Indoor Air Model – Pressed Wood Products

    Science.gov (United States)

    The Formaldehyde Indoor Air Model-pressed wood products (FIAM-pwp) user guide contains information on the equations and defaults used to estimate exposure from formaldehye emitted from pressed wood products.

  8. Prepublication Copy: Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products

    Science.gov (United States)

    Prepublication copy of the final rule Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products. Updates several voluntary consensus standards listed at 40 CFR § 770.99.

  9. Mononuclear metavanadate catalyses gas phase oxidation of methanol to formaldehyde employing dioxygen as the terminal oxidant.

    Science.gov (United States)

    Waters, Tom; Khairallah, George N; Wimala, Samantha A S Y; Ang, Yien C; O'Hair, Richard A J; Wedd, Anthony G

    2006-11-21

    Multistage mass spectrometry experiments reveal a sequence of gas phase reactions for the oxidation of methanol to formaldehyde with a mononuclear oxo vanadate anion as the catalyst and dioxygen as the terminal oxidant.

  10. Occupational exposure to formaldehyde, hematotoxicity, and leukemia-specific chromosome changes in cultured myeloid progenitor cells.

    NARCIS (Netherlands)

    Zhang, L.; Tang, X.; Rothman, N.; Vermeulen, R.; Ji, Z.; Shen, M.; Qiu, C.; Guo, W.; Liu, S.; Reiss, B.; Freeman, L.B.; Ge, Y.; Hubbard, A.E.; Hua, M.; Blair, A.; Galvan, N.; Ruan, X.; Alter, B.P.; Xin, K.X.; Li, S.; Moore, L.E.; Kim, S.; Xie, Y.; Hayes, R.B.; Azuma, M.; Hauptmann, M.; Xiong, J.; Stewart, P.; Li, L.; Rappaport, S.M.; Huang, H.; Fraumeni, J.F.; Smith, M.T.; Lan, Q.

    2010-01-01

    There are concerns about the health effects of formaldehyde exposure, including carcinogenicity, in light of elevated indoor air levels in new homes and occupational exposures experienced by workers in health care, embalming, manufacturing, and other industries. Epidemiologic studies suggest that

  11. Formaldehyde Exposure and Mortality Risks From Acute Myeloid Leukemia and Other Lymphohematopoietic Malignancies in the US National Cancer Institute Cohort Study of Workers in Formaldehyde Industries

    Science.gov (United States)

    Dell, Linda D.; Boffetta, Paolo; Gallagher, Alexa E.; Crawford, Lori; Lees, Peter SJ.; Mundt, Kenneth A.

    2015-01-01

    Objectives: To evaluate associations between cumulative and peak formaldehyde exposure and mortality from acute myeloid leukemia (AML) and other lymphohematopoietic malignancies. Methods: Cox proportional hazards analyses. Results: Acute myeloid leukemia was unrelated to cumulative exposure. Hodgkin lymphoma relative risk estimates in the highest exposure categories of cumulative and peak exposures were, respectively, 3.76 (Ptrend = 0.05) and 5.13 (Ptrend = 0.003). There were suggestive associations with peak exposure observed for chronic myeloid leukemia, albeit based on very small numbers. No other lymphohematopoietic malignancy was associated with either chronic or peak exposure. Conclusions: Insofar as there is no prior epidemiologic evidence supporting associations between formaldehyde and either Hodgkin leukemia or chronic myeloid leukemia, any causal interpretations of the observed risk patterns are at most tentative. Findings from this re-analysis do not support the hypothesis that formaldehyde is a cause of AML. PMID:26147546

  12. O-Alkyl Hydroxamates as Metaphors of Enzyme-Bound Enolate Intermediates in Hydroxy Acid Dehydrogenases. Inhibitors of Isopropylmalate Dehydrogenase, Isocitrate Dehydrogenase, and Tartrate Dehydrogenase(1).

    Science.gov (United States)

    Pirrung, Michael C.; Han, Hyunsoo; Chen, Jrlung

    1996-07-12

    The inhibition of Thermus thermophilus isopropylmalate dehydrogenase by O-methyl oxalohydroxamate was studied for comparison to earlier results of Schloss with the Salmonella enzyme. It is a fairly potent (1.2 &mgr;M), slow-binding, uncompetitive inhibitor against isopropylmalate and is far superior to an oxamide (25 mM K(i) competitive) that is isosteric with the ketoisocaproate product of the enzyme. This improvement in inhibition was attributed to its increased NH acidity, which presumably is due to the inductive effect of the hydroxylamine oxygen. This principle was extended to the structurally homologous enzyme isocitrate dehydrogenase from E. coli, for which the compound O-(carboxymethyl) oxalohydroxamate is a 30 nM inhibitor, uncompetitive against isocitrate. The pH dependence of its inhibition supports the idea that it is bound to the enzyme in the anionic form. Another recently discovered homologous enzyme, tartrate dehydrogenase from Pseudomonas putida, was studied with oxalylhydroxamate. It has a relatively low affinity for the enzyme, though it is superior to tartrate. On the basis of these leads, squaric hydroxamates with increased acidity compared to squaric amides directed toward two of these enzymes were prepared, and they also show increased inhibitory potency, though not approaching the nanomolar levels of the oxalylhydroxamates.

  13. Formaldehyde alters triglyceride synthesis and very low-density lipoprotein secretion in a time-dependent manner.

    Science.gov (United States)

    Bai, Jianying; Wang, Pan; Liu, Yanfei; Zhang, Yan; Li, Yaofu; He, Zhen; Hou, Lifang; Liang, Ruifeng

    2017-12-01

    Formaldehyde is a common indoor air pollutant that is toxic to the liver. This study aimed to investigate the effects of formaldehyde on triglyceride metabolism in human hepatocellular carcinoma cells (HepG2). Cell viability was detected using a MTT (3-(4,5-dimethylthiazol-2-Yl)-2,5-diphenyltetrazolium bromide) assay. Following treatment with different concentrations of formaldehyde for 24 and 48h, the intra and extra-hepatocellular triglyceride (TG) content was determined using a chemical-enzymatic method; Western blotting was used to detect the levels of fatty acid synthesis and VLDL-related proteins. Our results showed that cell viability significantly decreased after formaldehyde treatment (0.5-12.5mM, 24/48h). Extracellular TG levels in the hepatocytes increased after formaldehyde treatment at 0.004mM-0.1mM for 24h. SREBP-1c, ACC, FASN, and MTP, CES3 and DGAT1 proteins increased significantly after 24h of formaldehyde treatment. Intracellular TG levels decreased for 48h treatment of formaldehyde. AMPKα increased significantly in all tested groups and p-AMPK increased significantly after 0.1mM formaldehyde treatment for 48h. Our results indicated that short-term formaldehyde exposure balances triglyceride metabolism by promoting hepatocellular TG synthesis and VLDL secretion; Long-term formaldehyde disturbs the TG metabolism balance in the hepatocytes. Copyright © 2017. Published by Elsevier B.V.

  14. Formaldehyd i tekstil som mulig årsag til arthritis og angioødem

    DEFF Research Database (Denmark)

    Jensen, O C; Bach, B

    1992-01-01

    A case of arthritis and angioedema which developed on occupational exposure to formaldehyde in textiles is described. Possible pathological mechanisms are discussed. The suspicion that an unknown immunological reaction may be the cause is raised.......A case of arthritis and angioedema which developed on occupational exposure to formaldehyde in textiles is described. Possible pathological mechanisms are discussed. The suspicion that an unknown immunological reaction may be the cause is raised....

  15. Demethylation of methylmercury and the enhanced production of formaldehyde in mouse liver.

    Science.gov (United States)

    Uchikawa, Takuya; Kanno, Toshihiro; Maruyama, Isao; Mori, Nobuko; Yasutake, Akira; Ishii, Yuji; Yamada, Hideyuki

    2016-01-01

    Methylmercury (MeHg) is gradually changed to inorganic Hg after demethylation in animal tissues, and a selective quantification of inorganic Hg in the tissues is necessary to detect the reaction. We detected inorganic Hg formation in liver and kidney of mouse as early as 24 hr after MeHg injection. As an example of biological demethylation, the cytochrome P450 (P450)-mediated N-demethylation of drugs has been well documented, and formaldehyde was detected as a reaction product. Here we incubated mouse liver homogenate with added MeHg and observed a dose-dependent production of formaldehyde, as well as inorganic Hg formation. Since the amount of formaldehyde was approx. 500 times higher than that of the inorganic Hg that formed, the formaldehyde production would be stimulated by inorganic Hg formed from MeHg. We observed that inorganic Hg caused formaldehyde production, and it was enhanced by L-methionine and sarcosine. Thus, some biomolecules with S-methyl and N-methyl groups may function as methyl donors in the reaction. Using subcellular fractions of mouse liver, we observed that microsomal P450 did not participate in the demethylation of MeHg, but the greatest activity was located in the mitochondria-rich fraction. The addition of superoxide anion in the reaction mixture significantly enhanced the formaldehyde production, whereas Mn-superoxide dismutase depressed the reaction. Our present findings demonstrated that inorganic Hg formed by MeHg demethylation in mouse liver stimulated the endogenous formaldehyde production, and we observed that MeHg demethylation could be estimated by a formaldehyde analysis. Our results also suggested that superoxide anion is involved in the reaction.

  16. Formaldehyde preparation methods for pressure and temperature dependent laser-induced fluorescence measurements

    Science.gov (United States)

    Burkert, A.; Müller, D.; Rieger, S.; Schmidl, G.; Triebel, W.; Paa, W.

    2015-12-01

    Formaldehyde is an excellent tracer for the early phase of ignition of hydrocarbon fuels and can be used, e.g., for characterization of single droplet ignition. However, due to its fast thermal decomposition at elevated temperatures and pressures, the determination of concentration fields from laser-induced fluorescence (LIF) measurements is difficult. In this paper, we address LIF measurements of this important combustion intermediate using a calibration cell. Here, formaldehyde is created from evaporation of paraformaldehyde. We discuss three setups for preparation of formaldehyde/air mixtures with respect to their usability for well-defined heating of formaldehyde/air mixtures. The "basic setup" uses a resist heater around the measurement cell for investigation of formaldehyde near vacuum conditions or formaldehyde/air samples after sequential admixing of air. The second setup, described for the first time in detail here, takes advantage of a constant flow formaldehyde/air regime which uses preheated air to reduce the necessary time for gas heating. We used the constant flow system to measure new pressure dependent LIF excitation spectra in the 343 nm spectral region (414 absorption band of formaldehyde). The third setup, based on a novel concept for fast gas heating via excitation of SF6 (chemically inert gas) using a TEA (transverse excitation at atmospheric pressure) CO2 laser, allows to further minimize both gas heating time and thermal decomposition. Here, an admixture of CO2 is served for real time temperature measurement based on Raman scattering. The applicability of the fast laser heating system has been demonstrated with gas mixtures of SF6 + air, SF6 + N2, as well as SF6 + N2 + CO2 at 1 bar total pressure.

  17. [Critical approach to technics for the disinfection of respirators with formaldehyde].

    Science.gov (United States)

    Laguenie, G; Bavoux, F; Garnier, R; Murat, I; Couturier, C

    1983-03-01

    Method of artificial respirators desinfection by Formaldehyde is studied. Formaldehyde and ammoniac quantitative analysis are performed. Air samples are taken by dry process and by wet process. Two concentrations are in ceiling values for exposure of workers and exceed irritant concentrations during chronic exposition. Particular attention should be paid to perform measurement: air samples must be taken by wet process as artificial ventilation circumstances: indeed in this case air is humidified; potential toxicity is unappreciated in this use. Complementary studies are required.

  18. Adsorption of Pb, Cd, Zn, Cu and Hg ions on Formaldehyde and ...

    African Journals Online (AJOL)

    Adsorption of Pb(II), Cd(II), Zn(II), Cu(II) and Hg(II) ions on formaldehyde and Pyridine modified bean husks were determined. The adsorption capacity of formaldehyde modified bean husks (mg/g) was: Pb2+, 5.01; Cd2+, 3.63; Zn2+, 2.18; Hg2+, 1.82; Cu2+, 1.58 and that of pyridine modified bean husk was: Hg2+, 6.92; Cd2+ ...

  19. Performance of optical biosensor using alcohol oxidase enzyme for formaldehyde detection

    Science.gov (United States)

    Sari, A. P.; Rachim, A.; Nurlely, Fauzia, V.

    2017-07-01

    The recent issue in the world is the long exposure of formaldehyde which is can increase the risk of human health, therefore, that is very important to develop a device and method that can be optimized to detect the formaldehyde elements accurately, have a long lifetime and can be fabricated and produced in large quantities. A new and simple prepared optical biosensor for detection of formaldehyde in aqueous solutions using alcohol oxidase (AOX) enzyme was successfully fabricated. The poly-n-butyl acrylic-co-N-acryloxysuccinimide (nBA-NAS) membranes containing chromoionophore ETH5294 were used for immobilization of alcohol oxidase enzyme (AOX). Biosensor response was based on the colour change of chromoionophore as a result of enzymatic oxidation of formaldehyde and correlated with the detection concentration of formaldehyde. The performance of biosensor parameters were measured through the optical absorption value using UV-Vis spectrophotometer including the repeatability, reproducibility, selectivity and lifetime. The results showed that the prepared biosensor has good repeatability (RSD = 1.9 %) and good reproducibility (RSD = 2.1 %). The biosensor was selective formaldehyde with no disturbance by methanol, ethanol, and acetaldehyde, and also stable before 49 days and decrease by 41.77 % after 49 days.

  20. Human health risks of formaldehyde indoor levels: An issue of concern.

    Science.gov (United States)

    Rovira, Joaquim; Roig, Neus; Nadal, Martí; Schuhmacher, Marta; Domingo, José L

    2016-01-01

    Formaldehyde is a carcinogenic substance for humans. Exposure to formaldehyde may also cause eye and respiratory tract irritation, as well as skin sensitization. The main indoor sources of formaldehyde are wood-pressed products, insulation materials, paints, varnishes, household cleaning products and cigarettes, among others. Although this chemical is a well-known indoor pollutant, data on indoor concentrations of formaldehyde are still scarce in some countries. In February 2014, 10 homes in Catalonia, Spain, were randomly selected to collect indoor (bedroom and living room) and outdoor air samples. Ten additional samples were also collected at different workplaces (e.g., offices, shops, classrooms, etc.). Formaldehyde air levels found in homes ranged from 10.7 to 47.7 μg m(-3), from 9.65 to 37.2 μg m(-3), and from 0.96 to 3.37 μg m(-3) in bedrooms, living rooms, and outdoors, respectively. Meanwhile, at workplaces, indoor air levels ranged from 5.86 to 40.4 μg m(-3). These levels are in agreement with data found in the scientific literature. Non-carcinogenic risks were above the threshold limit (HQ > 1), and carcinogenic risks were not acceptable either (>10(-4)). Despite the current study limitations, the results confirm that formaldehyde indoor levels are a matter of health concern, which must be taken into account by policymakers and regulatory bodies.

  1. Analysis of formaldehyde in the atmosphere collected by EPA TO11 method with GC-FID

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Hongmao; Fryters, T.; Brassard, B. [CHEMEX, Edmonton, Alberta (Canada)

    1996-12-31

    Formaldehyde is an important pollutant in the atmosphere. It has been known as a major promoter in the formation of ozone because it can provide an immediate source of free radicals (HO{sub 2}) needed for the formation of ozone. The monitoring of formaldehyde in the atmosphere includes using spectroscopic techniques such as Fourier transform infrared spectrometry (FTIR) and optical adsorption spectrometry (ODAS) and solution/sorbent adsorption techniques (such as EPA TO11 and TO5 methods). EPA TO11 and TO5 methods are based on using 2,4-dinitrophenylhydrozine as a derivatization reagent for collection of formaldehyde in the atmosphere and then the extracts of the derivatized formaldehyde are analyzed by the HFLC. In this paper, a GC-FID technique is reported for analyzing the extract of formaldehyde derivation collected by the EPA TO11 method. The GC method has been extensively evaluated and compared with the HFLC method. Some field formaldehyde results are also reported in this paper.

  2. NMR studies of the equilibria and reaction rates in aqueous solutions of formaldehyde.

    Science.gov (United States)

    Rivlin, Michal; Eliav, Uzi; Navon, Gil

    2015-03-26

    Formaldehyde has an important role in the chemical industry and in biological sciences. In dilute aqueous solutions of formaldehyde only traces of the molecular formaldehyde are present and the predominant species are methylene glycol and in lower concentrations, dimethylene glycol. The chemical equilibria and reaction rates of the hydration of formaldehyde in H2O and D2O solutions at low concentrations were studied by (1)H and (13)C NMR at various conditions of pH (1.8-7.8) and temperature (278-333 K). These measurements became possible by direct detection of formaldehyde (13)C and (1)H peaks. The equilibrium and rate constants of the dimerization reaction of methylene glycol were also measured. The rate constants for both the hydration and the dimerization reactions were measured by a new version of the conventional selective inversion transfer method. This study, together with previous published work, completes the description of dynamics and equilibria of all the processes occurring in dilute aqueous formaldehyde solutions.

  3. Film bulk acoustic formaldehyde sensor with layer-by-layer assembled carbon nanotubes/polyethyleneimine multilayers

    Science.gov (United States)

    Wang, Wei; Chen, Da; Wang, Hongfei; Yu, Wenhua; Wu, Maozeng; Yang, Lei

    2018-02-01

    Trace formaldehyde vapor was detected by a micron-scale AlN film bulk acoustic resonator based on mass-sensitive mechanism. The layer-by-layer carbon nanotubes/polyethyleneimine multilayers were assembled on the resonator surface as the sensitive coating. An almost linear decrease of the resonant frequency was observed as a function of the number of nanotubes/polyethyleneimine periods. The multilayers showed a random and porous structure and thus provided a large specific surface area for gas adsorption and diffusion. At the same time, the amine groups in polyethyleneimine had an strong affinity to formaldehyde with excellent selectivity. When exposed to gaseous formaldehyde, the attachment of gas molecules induced a small decrease in the resonant frequency, which made the sensor easily detect formaldehyde at ppb levels with 1 min response time. A linear relationship was observed between the formaldehyde concentrations and the frequency downshift of the resonator. The layer number had an obvious influence on the absorption/desorption behavior of formaldehyde. The gas sensitivity of FBAR sensors was 1.29–1.90 kHz ppb‑1 with the limit of detection of 24–38 ppb.

  4. Occupational Exposure and Health Impairments of Formaldehyde on Employees of a Wood Industry.

    Science.gov (United States)

    Jafari, Mohammad Javad; Rahimi, Abolfazl; Omidi, Leila; Behzadi, Mohammad Hassan; Rajabi, Mohammad Hassan

    2015-01-01

    Occupational exposure to formaldehyde may decrease white blood cell counts and change blood concentration. In this study, the influences of occupational exposure to formaldehyde on the number of white blood cells and blood concentrations were studied. This case-control study was conducted in June of 2012 at North Wood Factory, Golestan Province, Iran. The US-NIOSH method No. 2541 was used to determine the occupational exposure of 30 workers of the production line (case group) and 30 administrative staffs (control group) to formalde-hyde. The number of white blood cells and blood concentration were determined using the normal blood count method and related indices. Demographic features as well as the symptoms of being exposed to formaldehyde were collected using a standard questionnaire. The occupational exposure of case group ranged from 0.50 ppm to 1.52 ppm. The prevalence of all studied symptoms from formaldehyde exposure in workers (2formaldehyde changed the blood concentration of the studied workers but did not change the number of their white blood cells.

  5. Characterization of the formaldehyde-H2O system using combined spectroscopic and mass spectrometry approaches

    Science.gov (United States)

    Oancea, A.; Hanoune, B.; Facq, S.; Focsa, C.; Chazallon, B.

    2009-04-01

    The atmosphere is a multiphase reactor in which physical exchange processes, heterogeneous reactions and photochemical reactions take place. The oxygenated organics (formaldehyde, ethanol, acetone etc.) present at trace concentrations into the atmosphere are known to play an important role in atmospheric chemistry due for example to their contribution in the production of HOx radicals, which largely determine the lifetime of pollutants [1]. Further, it has been shown that the interaction of oxygenated organics with ice particles in the atmosphere has the potential to promote heterogeneous chemistry [2]. In the polar lower troposphere, formaldehyde (H2CO) was measured in concentrations that are much higher that those predicted by chemistry models [3]. The mechanism at the origin of the formaldehyde production remains however controversial as the incorporation / partitioning of H2CO in ice crystal has to be determined first. Incorporation of formaldehyde into ice can take place according to several different physical mechanisms like co-condensation, riming, adsorption/desorption. The partitioning of formaldehyde between the gas phase, the liquid and the solid phases is an important parameter that leads to a better understanding of the incorporation mechanisms. In our work, different experimental approaches are used to characterize the partitioning between the different phases in which the H2O-H2CO system exists. Recently, we investigated by mass spectrometry and infrared diode laser spectroscopy the vapor liquid equilibrium (VLE) of formaldehyde aqueous solutions of different concentrations at room temperature. From the data collected on the vapor pressures at atmospherically relevant formaldehyde concentrations, we derived the Henry's coefficients at 295 K [4]. In this study we present first results on the solubility of formaldehyde in ice. This allows a better characterization of the partitioning of formaldehyde vapors above supercooled droplets and/or ice at low

  6. Effect of Formaldehyde on Human Middle Ear Epithelial Cells

    Directory of Open Access Journals (Sweden)

    Shin Hye Kim

    2018-01-01

    Full Text Available Formaldehyde (FA is a familiar indoor air pollutant found in everything from cosmetics to clothing, but its impact on the middle ear is unknown. This study investigated whether FA causes cytotoxicity, inflammation, or induction of apoptosis in human middle ear epithelial cells (HMEECs. Cell viability was investigated using the trypan blue assay and a cell counting kit (CCK-8 in HMEECs treated with FA for 4 or 24 h. The expression of genes encoding the inflammatory cytokine tumor necrosis factor alpha (TNF-α and mucin (MUC5AC was analyzed using RT-PCR. Activation of the apoptosis pathway was determined by measuring mitochondrial membrane potential (MMP, cytochrome oxidase, caspase-9/Mch6/Apaf 3, and Caspase-Glo® 3/7 activities. The CCK-8 assay and trypan blue assay results showed a reduction in cell viability in FA-treated HMEECs. FA also increased the cellular expression of TNF-α and MUC5AC and reduced the activities of MMP and cytochrome oxidase. Caspase-9 activity increased in cells stimulated for 4 h, as well as caspase-3/7 activity in cells stimulated for 24 h. The decreased cell viability, the induction of inflammation and mucin gene expression, and the activation of the apoptosis pathway together indicate a link between environmental FA exposure and the development of otitis media.

  7. Systematic studies of tannin–formaldehyde aerogels: preparation and properties

    International Nuclear Information System (INIS)

    Amaral-Labat, Gisele; Szczurek, Andrzej; Fierro, Vanessa; Pizzi, Antonio; Celzard, Alain

    2013-01-01

    Gelation of tannin–formaldehyde (TF) solutions was systematically investigated by changing pH and concentration of TF resin in water. In this way we constructed the TF phase diagram, from which chemical hydrogels could be described, and also synthesized thermoreversible tannin-based hydrogels. Conditions of non-gelation were also determined. Hydrogels were dried in supercritical CO 2 , leading to a broad range of TF aerogels. The latter were investigated for volume shrinkage, total porosity, micro-, meso- and macropore volumes, Brunauer–Emmett–Teller (BET) surface area, microscopic texture, mechanical and thermal properties. All these properties are discussed in relation to each other, leading to an accurate and self-consistent description of these bioresource-based highly porous materials. The conditions for obtaining the highest BET surface area or mesopore volume were determined and explained in relation to the preparation conditions. The highest BET surface area, 880 m 2 g −1 , is remarkably high for organic aerogels derived from a natural resource. (paper)

  8. Systematic studies of tannin-formaldehyde aerogels: preparation and properties

    Science.gov (United States)

    Amaral-Labat, Gisele; Szczurek, Andrzej; Fierro, Vanessa; Pizzi, Antonio; Celzard, Alain

    2013-02-01

    Gelation of tannin-formaldehyde (TF) solutions was systematically investigated by changing pH and concentration of TF resin in water. In this way we constructed the TF phase diagram, from which chemical hydrogels could be described, and also synthesized thermoreversible tannin-based hydrogels. Conditions of non-gelation were also determined. Hydrogels were dried in supercritical CO2, leading to a broad range of TF aerogels. The latter were investigated for volume shrinkage, total porosity, micro-, meso- and macropore volumes, Brunauer-Emmett-Teller (BET) surface area, microscopic texture, mechanical and thermal properties. All these properties are discussed in relation to each other, leading to an accurate and self-consistent description of these bioresource-based highly porous materials. The conditions for obtaining the highest BET surface area or mesopore volume were determined and explained in relation to the preparation conditions. The highest BET surface area, 880 m2 g-1, is remarkably high for organic aerogels derived from a natural resource.

  9. A new formaldehyde sensor from silver nanoclusters modified Tollens' reagent.

    Science.gov (United States)

    Chaiendoo, Kanokwan; Sooksin, Sawarin; Kulchat, Sirinan; Promarak, Vinich; Tuntulani, Thawatchai; Ngeontae, Wittaya

    2018-07-30

    A selective colorimetric assay for detecting formaldehyde (FA) was proposed based on silver nanoclusters (AgNCs) templated by polymethacrylic acid (PMAA). The chemodosimeter was easily fabricated by the formation of Tollens' reagent in the presence of AgNCs (AgNCs@Tollens). The detection principle was based on the change in the color caused by the change in the particle size from nanoclusters (no LSPR) to nanoparticles (with LSPR) upon the reduction of Tollens' reagent by FA. In the presence of FA, the intensity of a new absorbance band with a maximum at a wavelength of 430 nm corresponding to the LSPR of the AgNPs linearly increased as a function of the FA concentration, exhibiting a color change that could be observed by the naked eye. This method provided a working range of 30-50 µM with lower detection limit (LOD) of 27.99 µM. The proposed method exhibited excellent selectivity towards FA over other aldehyde-containing compounds. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. Exposition by inhalation to the formaldehyde in the air. Source, measures and concentrations; Exposition par inhalation au formaldehyde dans l'air. Source, mesures et concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Del Gratta, F.; Durif, M.; Fagault, Y.; Zdanevitch, I

    2004-12-15

    This document presents the main techniques today available to characterize the formaldehyde concentrations in the air for different contexts: urban and rural areas or around industrial installations but also indoor and occupational area. It provides information to guide laboratories and research departments. A synthesis gives also the main emissions sources of these compounds as reference concentrations measured in different environments. (A.L.B.)

  11. A novel derivatization-free method of formaldehyde and propylene glycol determination in hydrogels by liquid chromatography with refractometric detection.

    Science.gov (United States)

    Isakau, Henadz; Robert, Marielle; Shingel, Kirill I

    2009-04-05

    The paper describes the development and validation of a new derivatization-free liquid chromatography method for simultaneous determination of propylene glycol and formaldehyde in the formulations containing formaldehyde-releasing preservative. Highly swollen hydrogel made of poly(ethylene glycol)-protein conjugates was taken as a model formulation for integration of the propylene glycol and the diazolydinyl urea as formaldehyde releaser. The method is shown to be simple and selective and, more importantly, allows determining an existing level of formaldehyde at the moment of analysis instead of all available formaldehyde that might be released during chemical derivatization. After liquid extraction the propylene glycol (PG) and formaldehyde (FA) amounts are determined chromatographically on a Shodex SH 1011 ligand-exchange column using 0.01 M sulfuric acid mobile phase, a flow rate of 1.0 ml/min and RI detection. The assay is validated showing good linearity, precision, and accuracy. The limits of detection of formaldehyde and propylene glycol in the analyzed solutions were estimated to be 25 ng and 87 ng, respectively. This analytical assay is considered useful for product stability studies and in developing new formaldehyde releaser-containing formulations where the concentration of formaldehyde is a presumable subject of labeling requirements. This method can also provide a rapid and convenient alternative to gas chromatography method of propylene glycol quantification.

  12. Regulation characteristics of oxide generation and formaldehyde removal by using volume DBD reactor

    Science.gov (United States)

    Bingyan, CHEN; Xiangxiang, GAO; Ke, CHEN; Changyu, LIU; Qinshu, LI; Wei, SU; Yongfeng, JIANG; Xiang, HE; Changping, ZHU; Juntao, FEI

    2018-02-01

    Discharge plasmas in air can be accompanied by ultraviolet (UV) radiation and electron impact, which can produce large numbers of reactive species such as hydroxyl radical (OH·), oxygen radical (O·), ozone (O3), and nitrogen oxides (NO x ), etc. The composition and dosage of reactive species usually play an important role in the case of volatile organic compounds (VOCs) treatment with the discharge plasmas. In this paper, we propose a volume discharge setup used to purify formaldehyde in air, which is configured by a plate-to-plate dielectric barrier discharge (DBD) channel and excited by an AC high voltage source. The results show that the relative spectral-intensity from DBD cell without formaldehyde is stronger than the case with formaldehyde. The energy efficiency ratios (EERs) of both oxides yield and formaldehyde removal can be regulated by the gas flow velocity in DBD channel, and the most desirable processing effect is the gas flow velocity within the range from 2.50 to 3.33 m s‑1. Moreover, the EERs of both the generated dosages of oxides (O3 and NO2) and the amount of removed formaldehyde can also be regulated by both of the applied voltage and power density loaded on the DBD cell. Additionally, the EERs of both oxides generation and formaldehyde removal present as a function of normal distribution with increasing the applied power density, and the peak of the function is appeared in the range from 273.5 to 400.0 W l‑1. This work clearly demonstrates the regulation characteristic of both the formaldehyde removal and oxides yield by using volume DBD, and it is helpful in the applications of VOCs removal by using discharge plasma.

  13. Potential Exposure and Cancer Risk from Formaldehyde Emissions from Installed Chinese Manufactured Laminate Flooring.

    Science.gov (United States)

    Sheehan, Patrick; Singhal, Ankur; Bogen, Kenneth T; MacIntosh, David; Kalmes, Renee M; McCarthy, John

    2017-11-15

    Lumber Liquidators (LL) Chinese-manufactured laminate flooring (CLF) has been installed in >400,000 U.S. homes over the last decade. To characterize potential associated formaldehyde exposures and cancer risks, chamber emissions data were collected from 399 new LL CLF, and from LL CLF installed in 899 homes in which measured aggregate indoor formaldehyde concentrations exceeded 100 μg/m 3 from a total of 17,867 homes screened. Data from both sources were combined to characterize LL CLF flooring-associated formaldehyde emissions from new boards and installed boards. New flooring had an average (±SD) emission rate of 61.3 ± 52.1 μg/m 2 -hour; >one-year installed boards had ∼threefold lower emission rates. Estimated emission rates for the 899 homes and corresponding data from questionnaires were used as inputs to a single-compartment, steady-state mass-balance model to estimate corresponding residence-specific TWA formaldehyde concentrations and potential resident exposures. Only ∼0.7% of those homes had estimated acute formaldehyde concentrations >100 μg/m 3 immediately after LL CLF installation. The TWA daily formaldehyde inhalation exposure within the 899 homes was estimated to be 17 μg/day using California Proposition 65 default methods to extrapolate cancer risk (below the regulation "no significant risk level" of 40 μg/day). Using a U.S. Environmental Protection Agency linear cancer risk model, 50th and 95th percentile values of expected lifetime cancer risk for residents of these homes were estimated to be 0.33 and 1.2 per 100,000 exposed, respectively. Based on more recent data and verified nonlinear cancer risk assessment models, LL CLF formaldehyde emissions pose virtually no cancer risk to affected consumers. © 2017 Society for Risk Analysis.

  14. Low-Dose Formaldehyde Delays DNA Damage Recognition and DNA Excision Repair in Human Cells

    Science.gov (United States)

    Luch, Andreas; Frey, Flurina C. Clement; Meier, Regula; Fei, Jia; Naegeli, Hanspeter

    2014-01-01

    Objective Formaldehyde is still widely employed as a universal crosslinking agent, preservative and disinfectant, despite its proven carcinogenicity in occupationally exposed workers. Therefore, it is of paramount importance to understand the possible impact of low-dose formaldehyde exposures in the general population. Due to the concomitant occurrence of multiple indoor and outdoor toxicants, we tested how formaldehyde, at micromolar concentrations, interferes with general DNA damage recognition and excision processes that remove some of the most frequently inflicted DNA lesions. Methodology/Principal Findings The overall mobility of the DNA damage sensors UV-DDB (ultraviolet-damaged DNA-binding) and XPC (xeroderma pigmentosum group C) was analyzed by assessing real-time protein dynamics in the nucleus of cultured human cells exposed to non-cytotoxic (formaldehyde concentrations. The DNA lesion-specific recruitment of these damage sensors was tested by monitoring their accumulation at local irradiation spots. DNA repair activity was determined in host-cell reactivation assays and, more directly, by measuring the excision of DNA lesions from chromosomes. Taken together, these assays demonstrated that formaldehyde obstructs the rapid nuclear trafficking of DNA damage sensors and, consequently, slows down their relocation to DNA damage sites thus delaying the excision repair of target lesions. A concentration-dependent effect relationship established a threshold concentration of as low as 25 micromolar for the inhibition of DNA excision repair. Conclusions/Significance A main implication of the retarded repair activity is that low-dose formaldehyde may exert an adjuvant role in carcinogenesis by impeding the excision of multiple mutagenic base lesions. In view of this generally disruptive effect on DNA repair, we propose that formaldehyde exposures in the general population should be further decreased to help reducing cancer risks. PMID:24722772

  15. Study of Necrosis in the Liver of Formaldehyde and Benzo(αPyrene Exposured-Mice

    Directory of Open Access Journals (Sweden)

    Ahmad Soni

    2013-04-01

    Full Text Available Formaldehyde and benzo(αpyrene are compounds that harmful for health. Misapplication of this compound has an impact in the form of organ damage in the body. This study aims to determine the impact of the treatment of the combined exposure of formaldehyde and benzo(αpyrene to cell necrosis in the liver of mice (Mus musculus. Treatment of formaldehyde dose of 25 mg/kg BW to mice was given orally every day for 60 days. Treatment of benzo(αpyrene via intraperitoneal injection at a dose of 250 mg/kg BW were given after 30 days of incubation with four times injection with one day interval. Liver organ histological preparations were made through the HE staining. Observations were made by using a microscope for liver organ preparations. The data obtained that is the percentage of cells necrosis and necrotic foci. This research used Completely Randomized Design (CRD with 95% confidence interval. Liver organ preparations observations indicate that the percentage of necrosis in the untreated control, benzo(αpyrene 250 mg/kg BW, formaldehyde 25 mg/kg BW, combination of formaldehyde 25 mg/kg BW with BaP in a row that is equal to 14.43% ± 0.91; 26.05% ± 3.75; 49.38% ± 2.66; 51.86 ± 1.73. The mean of necrotic foci in liver organ formed in the untreatment control, benzo(αpyrene 250 mg/kg BW, Formaldehyde 25 mg/kg BW, and the combination of formaldehyde 25 mg/kg BW with BaP in a row, equal to 1.3 ± 0,07; 1.63 ± 0.61; 2 ± 0.51, and 3.4 ± 0.76. This suggests that the combined treatment had the highest level of toxicity compared with other treatments.

  16. The Australian Work Exposures Study: Prevalence of Occupational Exposure to Formaldehyde.

    Science.gov (United States)

    Driscoll, Timothy R; Carey, Renee N; Peters, Susan; Glass, Deborah C; Benke, Geza; Reid, Alison; Fritschi, Lin

    2016-01-01

    The aims of this study were to produce a population-based estimate of the prevalence of work-related exposure to formaldehyde, to identify the main circumstances of exposure and to describe the use of workplace control measures designed to decrease those exposures. The analysis used data from the Australian Workplace Exposures Study, a nationwide telephone survey, which investigated the current prevalence and exposure circumstances of work-related exposure to 38 known or suspected carcinogens, including formaldehyde, among Australian workers aged 18-65 years. Using the web-based tool OccIDEAS, semi-quantitative information was collected about exposures in the current job held by the respondent. Questions were addressed primarily at tasks undertaken rather than about self-reported exposures. Of the 4993 included respondents, 124 (2.5%) were identified as probably being exposed to formaldehyde in the course of their work [extrapolated to 2.6% of the Australian working population-265 000 (95% confidence interval 221 000-316 000) workers]. Most (87.1%) were male. About half worked in technical and trades occupations. In terms of industry, about half worked in the construction industry. The main circumstances of exposure were working with particle board or plywood typically through carpentry work, building maintenance, or sanding prior to painting; with the more common of other exposures circumstances being firefighters involved in fighting fires, fire overhaul, and clean-up or back-burning; and health workers using formaldehyde when sterilizing equipment or in a pathology laboratory setting. The use of control measures was inconsistent. Workers are exposed to formaldehyde in many different occupational circumstances. Information on the exposure circumstances can be used to support decisions on appropriate priorities for intervention and control of occupational exposure to formaldehyde, and estimates of burden of cancer arising from occupational exposure to formaldehyde

  17. Novel silicone-based polymer containing active methylene designed for the removal of indoor formaldehyde

    Energy Technology Data Exchange (ETDEWEB)

    Niu, Song, E-mail: niusong84@163.com; Yan, Hongxia, E-mail: hongxiayan@nwpu.edu.cn

    2015-04-28

    Highlights: • A novel silicone-based polymer with active methylene was explored. • Surface tension of liquid paints could be lowered using the polymer. • The polymer was easy to migrate toward the air-coating interface. • Free HCHO could effectively be removed using the polymer. • A lights on HCHO reduction without complicated preparation procedure was shielded. - Abstract: Indoor air pollution is caused inevitably due to complicated home decoration, in which formaldehyde is one of the most typical pollutants. It will be a convenient, economical and effective strategy to remove indoor formaldehyde if imparting a feature of formaldehyde removal to decorative coatings. We have successfully explored a novel silicone-based polymer containing active methylene used as a formaldehyde absorbent in coatings via a straightforward transesterification process using inexpensive and easily available chemicals. The polymer has been characterized by {sup 13}C NMR, FTIR, GC and GPC. Formaldehyde removal capacity of the coating films containing different contents of the polymer has been investigated. The results indicated that coatings incorporating 4 wt% of the polymer could make the coating films exhibit significant improvement on formaldehyde removal including purificatory performance (>85%) and durability of purificatory effect (>60%), compared to those consisting of absorbents without any silicon, and improve yellowing resistance performance, while other properties, such as gloss, adhesion, pencil hardness, flexibility and impact resistance, were kept almost unaffected. The chemical absorption process of the silicone-based polymer filled in interior decorative coatings is demonstrated as a promising technology to purify indoor formaldehyde and thus can reduce the harm to individuals.

  18. Formation, Accumulation, and Hydrolysis of Endogenous and Exogenous Formaldehyde-Induced DNA Damage.

    Science.gov (United States)

    Yu, Rui; Lai, Yongquan; Hartwell, Hadley J; Moeller, Benjamin C; Doyle-Eisele, Melanie; Kracko, Dean; Bodnar, Wanda M; Starr, Thomas B; Swenberg, James A

    2015-07-01

    Formaldehyde is not only a widely used chemical with well-known carcinogenicity but is also a normal metabolite of living cells. It thus poses unique challenges for understanding risks associated with exposure. N(2-)hydroxymethyl-dG (N(2)-HOMe-dG) is the main formaldehyde-induced DNA mono-adduct, which together with DNA-protein crosslinks (DPCs) and toxicity-induced cell proliferation, play important roles in a mutagenic mode of action for cancer. In this study, N(2)-HOMe-dG was shown to be an excellent biomarker for direct adduction of formaldehyde to DNA and the hydrolysis of DPCs. The use of inhaled [(13)CD2]-formaldehyde exposures of rats and primates coupled with ultrasensitive nano ultra performance liquid chromatography-tandem mass spectrometry permitted accurate determinations of endogenous and exogenous formaldehyde DNA damage. The results show that inhaled formaldehyde only reached rat and monkey noses, but not tissues distant to the site of initial contact. The amounts of exogenous adducts were remarkably lower than those of endogenous adducts in exposed nasal epithelium. Moreover, exogenous adducts accumulated in rat nasal epithelium over the 28-days exposure to reach steady-state concentrations, followed by elimination with a half-life (t1/2) of 7.1 days. Additionally, we examined artifact formation during DNA preparation to ensure the accuracy of nonlabeled N(2)-HOMe-dG measurements. These novel findings provide critical new data for understanding major issues identified by the National Research Council Review of the 2010 Environmental Protection Agency's Draft Integrated Risk Information System Formaldehyde Risk Assessment. They support a data-driven need for reflection on whether risks have been overestimated for inhaled formaldehyde, whereas underappreciating endogenous formaldehyde as the primary source of exposure that results in bone marrow toxicity and leukemia in susceptible humans and rodents deficient in DNA repair. © The Author 2015

  19. Aldehyde dehydrogenase protein superfamily in maize.

    Science.gov (United States)

    Zhou, Mei-Liang; Zhang, Qian; Zhou, Ming; Qi, Lei-Peng; Yang, Xiong-Bang; Zhang, Kai-Xuan; Pang, Jun-Feng; Zhu, Xue-Mei; Shao, Ji-Rong; Tang, Yi-Xiong; Wu, Yan-Min

    2012-11-01

    Maize (Zea mays ssp. mays L.) is an important model organism for fundamental research in the agro-biotechnology field. Aldehydes were generated in response to a suite of environmental stresses that perturb metabolism including salinity, dehydration, desiccation, and cold and heat shock. Many biologically important aldehydes are metabolized by the superfamily of NAD(P)(+)-dependent aldehyde dehydrogenases. Here, starting from the database of Z. mays, we identified 28 aldehyde dehydrogenase (ALDH) genes and 48 transcripts by the in silico cloning method using the ALDH-conserved domain amino acid sequence of Arabidopsis and rice as a probe. Phylogenetic analysis shows that all 28 members of the ALDH gene families were classified to ten distinct subfamilies. Microarray data and quantitative real-time PCR analysis reveal that ZmALDH9, ZmALDH13, and ZmALDH17 genes involve the function of drought stress, acid tolerance, and pathogens infection. These results suggested that these three ZmALDH genes might be potentially useful in maize genetic improvement.

  20. Nose-only inhalation exposure system for generation, treatment and characterization of formaldehyde vapor

    Energy Technology Data Exchange (ETDEWEB)

    Leach, C.L.; Oberg, S.G.; Sharma, R.P.; Brown, D.B.

    1984-04-01

    A description of a novel symmetrical nose-only inhalation chamber for small animals is presented. The chamber utilizes a circular design and a round baffle plate around which the test atmosphere is evenly drawn in order to expose each symmetrically placed animal port to equivalent gas concentrations without exposing animals to each other's expired gases. The nose-only mode may be more suitable for inhalation exposures as compared to whole-body exposures which allow skin contamination and possible aerosol ingestion through preening habits. Evidence is presented that nose-only exposure which requires animal restraint is no more stressful than freely-caged exposure as measured by total peripheral white blood cell counts and the ease of animal entry into the restraining tubes. Applications of the exposure system are described for the case of pure formaldehyde vapor generation. The method for formaldehyde generation entails heating solid paraformaldehyde polymer in a mineral oil bath and diluting with filtered room air. The temperature of the paraformaldehyde is exponentially related to the concentration of formaldehyde concentrations and system flow rates. A 2-liter impinger collects > 95% of the formaldehyde generated at concentrations up to 100 ppm and flowrates of 15 liters per minute. Efficacy of the overall system in terms of maintenance of desired concentrations is described. A comparison of desired concentrations and measured concentrations is presented for four groups of rats exposed to formaldehyde vapor from 2 to 10 ppm.

  1. Circulating immune/inflammation markers in Chinese workers occupationally exposed to formaldehyde

    Science.gov (United States)

    Seow, Wei Jie; Zhang, Luoping; Vermeulen, Roel; Tang, Xiaojiang; Hu, Wei; Bassig, Bryan A.; Ji, Zhiying; Shiels, Meredith S.; Kemp, Troy J.; Shen, Min; Qiu, Chuangyi; Reiss, Boris; Beane Freeman, Laura E.; Blair, Aaron; Kim, Christopher; Guo, Weihong; Wen, Cuiju; Li, Laiyu; Pinto, Ligia A.; Huang, Hanlin; Smith, Martyn T.; Hildesheim, Allan; Rothman, Nathaniel; Lan, Qing

    2015-01-01

    Background. Formaldehyde has been classified as a human myeloid leukemogen. However, the mechanistic basis for this association is still debated. Objectives. We aimed to evaluate whether circulating immune/inflammation markers were altered in workers occupationally exposed to formaldehyde. Methods. Using a multiplexed bead-based assay, we measured serum levels of 38 immune/inflammation markers in a cross-sectional study of 43 formaldehyde-exposed and 51 unexposed factory workers in Guangdong, China. Linear regression models adjusting for potential confounders were used to compare marker levels in exposed and unexposed workers. Results. We found significantly lower circulating levels of two markers among exposed factory workers compared with unexposed controls that remained significant after adjusting for potential confounders and multiple comparisons using a false discovery rate of 10%, including chemokine (C-X-C motif) ligand 11 (36.2 pg/ml in exposed versus 48.4 pg/ml in controls, P = 0.0008) and thymus and activation regulated chemokine (52.7 pg/ml in exposed versus 75.0 pg/ml in controls, P = 0.0028), suggesting immunosuppression among formaldehyde-exposed workers. Conclusions. Our findings are consistent with recently emerging understanding that immunosuppression might be associated with myeloid diseases. These findings, if replicated in a larger study, may provide insights into the mechanisms by which formaldehyde promotes leukemogenesis. PMID:25908645

  2. Formaldehyde exposure and its effects during pregnancy: Recommendations for laboratory attendance based on available data.

    Science.gov (United States)

    Haffner, Matthew J; Oakes, Peter; Demerdash, Amin; Yammine, Kaissar Cesar; Watanabe, Koichi; Loukas, Marios; Tubbs, R Shane

    2015-11-01

    Formalin is commonly used in fixation of cadaveric specimens. Exposure to formaldehyde, a component of formalin and a known carcinogen, during gross anatomy laboratory dissection is a continuing concern for pregnant students and instructors. Since there is little literature on this specific topic, the current review was compiled in the hope of offering recommendations to pregnant students and instructors who are engaged in human anatomical dissection where formalin is used. Relevant articles were obtained through searches of PubMed and Google Scholar for the terms "formaldehyde," "pregnant," "formalin," and "exposure." A literature search was conducted for chemical information and articles about exposure as issued by government regulatory agencies and chemical companies that produce formaldehyde. This led to the compilation of 29 articles each of which included references to previous, relevant, human research. The reviewed literature contains data strongly suggesting that pregnancy can be affected by formaldehyde exposure. Therefore, on the basis our analysis, female students who might be pregnant should avoid formaldehyde exposure, including that in a gross anatomy laboratory. Instructors should find other means of ensuring anatomical competence for these students. © 2015 Wiley Periodicals, Inc.

  3. Formaldehyde Crosses the Human Placenta and Affects Human Trophoblast Differentiation and Hormonal Functions

    Science.gov (United States)

    Pidoux, Guillaume; Gerbaud, Pascale; Guibourdenche, Jean; Thérond, Patrice; Ferreira, Fatima; Simasotchi, Christelle; Evain-Brion, Danièle; Gil, Sophie

    2015-01-01

    The chorionic villus of the human placenta is the source of specific endocrine functions and nutrient exchanges. These activities are ensured by the syncytiotrophobast (ST), which bathes in maternal blood. The ST arises and regenerates throughout pregnancy by fusion of underlying cytotrophoblasts (CT). Any anomaly of ST formation or regeneration can affect pregnancy outcome and fetal growth. Because of its direct interaction with maternal blood, the ST is sensitive to drugs, pollutants and xenohormones. Ex vivo assays of perfused cotyledon show that formaldehyde, a common pollutant present in furniture, paint and plastics, can accumulate in the human placenta and cross to the fetal compartment. By means of RT-qPCR, immunoblot and immunocytochemistry experiments, we demonstrate in vitro that formaldehyde exerts endocrine toxicity on human trophoblasts, including a decrease in the production of protein hormones of pregnancy. In addition, formaldehyde exposure triggered human trophoblast fusion by upregulating syncitin-1 receptor expression (ASC-type amino-acid transporter 2: ASCT2). Moreover, we show that formaldehyde-exposed trophoblasts present an altered redox status associated with oxidative stress, and an increase in ASCT2 expression intended to compensate for this stress. Finally, we demonstrate that the adverse effects of formaldehyde on trophoblast differentiation and fusion are reversed by N-acetyl-L-cysteine (Nac), an antioxidant. PMID:26186596

  4. Age-related formaldehyde interferes with DNA methyltransferase function, causing memory loss in Alzheimer's disease.

    Science.gov (United States)

    Tong, Zhiqian; Han, Chanshuai; Qiang, Min; Wang, Weishan; Lv, Jihui; Zhang, Shouzi; Luo, Wenhong; Li, Hui; Luo, Hongjun; Zhou, Jiangning; Wu, Beibei; Su, Tao; Yang, Xu; Wang, Xiaomin; Liu, Ying; He, Rongqiao

    2015-01-01

    Hippocampus-related topographic amnesia is the most common symptom of memory disorders in Alzheimer's disease (AD) patients. Recent studies have revealed that experience-mediated DNA methylation, which is regulated by enzymes with DNA methyltransferase (DNMT) activity, is required for the formation of recent memory as well as the maintenance of remote memory. Notably, overexpression of DNMT3a in the hippocampus can reverse spatial memory deficits in aged mice. However, a decline in global DNA methylation was found in the autopsied hippocampi of patients with AD. Exactly, what endogenous factors that affect DNA methylation still remain to be elucidated. Here, we report a marked increase in endogenous formaldehyde levels is associated with a decline in global DNA methylation in the autopsied hippocampus from AD patients. In vitro and in vivo results show that formaldehyde in excess of normal physiological levels reduced global DNA methylation by interfering DNMTs. Interestingly, intrahippocampal injection of excess formaldehyde before spatial learning in healthy adult rats can mimic the learning difficulty of early stage of AD. Moreover, injection of excess formaldehyde after spatial learning can mimic the loss of remote spatial memory observed in late stage of AD. These findings suggest that aging-associated formaldehyde contributes to topographic amnesia in AD patients. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Formaldehyde and heavy metal migration from rubber and metallic packaging/utensils in Korea.

    Science.gov (United States)

    Kim, Su-Un; Kim, Tae-Rang; Lee, Eun-Soon; Kim, Mi-Sun; Kim, Chang-Kyu; Kim, Li-Ra; Shin, Gi-Young

    2015-01-01

    The aim of this study was to determine the non-intentionally added substances--formaldehyde and trace metals--at 4% acetic acid conditions in rubber and metallic packaging/utensils. The temperature effect on migration in rubber and metallic packaging/utensils was monitored at 60 °C and 100 °C under acidic (pH formaldehyde--23.1 μg kg⁻¹, lead--13.41 μg kg⁻¹, cadmium--0.15 μg kg⁻¹, total arsenic--2.02 μg kg⁻¹ and nickel--2.92 μg kg⁻¹ at 60 °C and formaldehyde--148.9 μg kg⁻¹, lead--17.04 μg kg⁻¹, cadmium--0.14 μg kg⁻¹, total arsenic--7.25 μg kg⁻¹ and nickel--8.7 μg kg⁻¹ at 100 °C. A significant difference was noticed in formaldehyde and total arsenic between both temperatures (p formaldehyde and total arsenic were more sensitive with cooking temperature than the other metals.

  6. A Potentiometric Formaldehyde Biosensor Based on Immobilization of Alcohol Oxidase on Acryloxysuccinimide-modified Acrylic Microspheres

    Directory of Open Access Journals (Sweden)

    Lee Yook Heng

    2010-11-01

    Full Text Available A new alcohol oxidase (AOX enzyme-based formaldehyde biosensor based on acrylic microspheres has been developed. Hydrophobic poly(n-butyl acrylate-N-acryloxy-succinimide [poly(nBA-NAS] microspheres, an enzyme immobilization matrix, was synthesized using photopolymerization in an emulsion form. AOX-poly(nBA-NAS microspheres were deposited on a pH transducer made from a layer of photocured and self-plasticized polyacrylate membrane with an entrapped pH ionophore coated on a Ag/AgCl screen printed electrode (SPE. Oxidation of formaldehyde by the immobilized AOX resulted in the production of protons, which can be determined via the pH transducer. Effects of buffer concentrations, pH and different amount of immobilization matrix towards the biosensor’s analytical performance were investigated. The formaldehyde biosensor exhibited a dynamic linear response range to formaldehyde from 0.3–316.2 mM and a sensitivity of 59.41 ± 0.66 mV/decade (R2 = 0.9776, n = 3. The lower detection limit of the biosensor was 0.3 mM, while reproducibility and repeatability were 3.16% RSD (relative standard deviation and 1.11% RSD, respectively (n = 3. The use of acrylic microspheres in the potentiometric formaldehyde biosensor improved the biosensor’s performance in terms of response time, linear response range and long term stability when compared with thick film immobilization methods.

  7. Respiratory symptoms and functional impairments induced by occupational exposure to formaldehyde

    Directory of Open Access Journals (Sweden)

    AR Choobineh

    2010-07-01

    Full Text Available Background and aimsThe main purpose of this study was to assess the acute and chronic effects of occupational exposure to low levels of formaldehyde on respiratory health.MethodsThis historical cohort study was conducted at a local melamine-formaldehyde resin producing plant. The study population consisted of seventy exposed and 24 non-exposed (referent employees. In this study, a questionnaire was used to evaluate and determined the prevalence of respiratory symptoms. Atmospheric concentrations of formaldehyde were measured at different areas of the plant. Similarly, using a spirometer, the parameters of pulmonary function were measured during exposure and a few days after exposure ceased.ResultsAtmospheric concentrations of formaldehyde marginally exceeded current permissible levels. Additionally, significant decrements in some parameters of pulmonary function, both during and after exposure were noted. However, a relative recovery in lungfunctional capacity observed following temporary cessation of exposure. Furthermore, exposed workers had higher prevalencerates of regular cough, wheezing, phlegm, shortness of breath, chest tightness and episodes of chest illness associated with cold.ConclusionThe findings of this study indicate that exposure to formaldehyde may induce respiratory symptoms, acute partially reversible and chronic irreversible functional impairments of the lungs.

  8. The detection of formaldehyde using microelectromechanical acoustic resonator with multiwalled carbon nanotubes-polyethyleneimine composite coating

    Science.gov (United States)

    Wang, Jingjing; Zhan, Da; Wang, Ke; Hang, Weiwei

    2018-01-01

    A micro-scale gas sensor based on mass-sensitive film bulk acoustic resonator is demonstrated for the detection of trace formaldehyde at room temperature. The composites mixed with multiwalled carbon nanotubes and polyethyleneimine (MWNTs-PEI) were coated on the resonator surface as the sensitive layer to specifically absorb formaldehyde molecules using a facile spray process. The influence of spraying processes on the formaldehyde sensing properties were investigated. Different response behaviors were determined by both the chemical absorption between formaldehyde molecules and the amine functional groups on PEI and the increase of absorption surface came from the nanostructure. The combination of high frequency of the film bulk acoustic resonator (~4.3 GHz) and the specific absorbability of MWNTs-PEI composites provided a high sensitivity in the detections of trace formaldehyde. The obtained ultra-low limit of detection was as low as 60 ppb with linear response, quick response/recovery time, good reproducibility and selectivity. The proposed sensor shows potential as a portable and convenient gas-sensing system for monitoring the low-level concentration of indoor air pollution.

  9. Gas-diffusion microextraction coupled with spectrophotometry for the determination of formaldehyde in cork agglomerates.

    Science.gov (United States)

    Brandão, Pedro F; Ramos, Rui M; Valente, Inês M; Almeida, Paulo J; Carro, Antonia M; Lorenzo, Rosa A; Rodrigues, José A

    2017-04-01

    In this work, a simple methodology was developed for the extraction and determination of free formaldehyde content in cork agglomerate samples. For the first time, gas-diffusion microextraction was used for the extraction of volatile formaldehyde directly from samples, with simultaneous derivatization with acetylacetone (Hantzsch reaction). The absorbance of the coloured solution was read in a spectrophotometer at 412 nm. Different extraction parameters were studied and optimized (extraction temperature, sample mass, volume of acceptor solution, extraction time and concentration of derivatization reagent) by means of an asymmetric screening. The developed methodology proved to be a reliable tool for the determination of formaldehyde in cork agglomerates with the following suitable method features: low LOD (0.14 mg kg -1 ) and LOQ (0.47 mg kg -1 ), r 2  = 0.9994, and intraday and interday precision of 3.5 and 4.9%, respectively. The developed methodology was applied to the determination of formaldehyde in different cork agglomerate samples, and contents between 1.9 and 9.4 mg kg -1 were found. Furthermore, formaldehyde was also determined by the standard method EN 717-3 for comparison purposes; no significant differences between the results of both methods were observed. Graphical abstract Representation of the GDME system and its main components.

  10. Effect of Thermal Treatment of Veneer on Formaldehyde Emission of Poplar Plywood

    Directory of Open Access Journals (Sweden)

    Takato Nakano

    2013-01-01

    Full Text Available A large amount of poplar plywood is now being imported into Japan from China, and as a result, formaldehyde emitted from this plywood represents an undesirable chemical that must be controlled using a chemical catching agent. The aim of this study is to find an approach to reduce the formaldehyde emission of poplar plywood using thermal treatment without employing any chemicals. The experimental results obtained show that heating veneer sheets in the temperature range of 150 °C to 170 °C effectively reduced the formaldehyde emission of plywood, without diminishing the mechanical properties of the veneer. By applying Langmuir’s theory and Hailwood-Horrobin theory to the adsorption isotherm obtained in this study, the relationship between the formaldehyde emission of plywood and the adsorption properties of veneer as a material is discussed. When veneer sheets were heated in the temperature range of 150 °C to 170 °C, the amount of hydrated water (monomolecular layer decreased slightly and that of dissolved water (polymolecular layer did not change. It is hypothesized that the formaldehyde emission of plywood is related to the condition of the adsorption site of the wood.

  11. Community interest and feasibility of using a novel smartphone-based formaldehyde exposure detection technology.

    Science.gov (United States)

    Castner, Jessica; Gehrke, Gretchen E; Shapiro, Nicholas; Dannemiller, Karen C

    2018-01-11

    This study is the first community engagement phase of a project to develop a residential formaldehyde detection system. The objectives were to conduct a feasibility assessment for device use, and identify factors associated with concerns about environmental exposure and community interest in this device. A cross-sectional, internet-based survey employing community-based participatory research principles was utilized. 147 individuals participated from a focused Waycross, Georgia (58.5%) and broader national sample (41.5%). Variables included acceptable cost and number of testing samples, interest in conducting tests, levels of concern over pollutants, health status, housing, and demographics. The majority of participants desired a system with fewer than 10 samples at ≤$15.00 per sample. Statistically significant higher levels of concern over air quality, formaldehyde exposure, and interest in testing formaldehyde were observed for those with overall worse health status and living in the Waycross, Georgia geographic region. Significant differences in formaldehyde testing interest were observed by health status (OR = 0.31, 95% CI = 0.12-0.81 for home testing) and geographic location (OR = 3.16, 95% CI = 1.22-8.14 for home and OR = 4.06, 95% CI = 1.48-11.12 for ambient testing) in multivariate models. Geographic location and poorer general health status were associated with concerns over and interest in formaldehyde testing. © 2018 Wiley Periodicals, Inc.

  12. Formaldehyde Production From Isoprene Oxidation Across NOx Regimes

    Science.gov (United States)

    Wolfe, G. M.; Kaiser, J.; Hanisco, T. F.; Keutsch, F. N.; de Gouw, J. A.; Gilman, J. B.; Graus, M.; Hatch, C. D.; Holloway, J.; Horowitz, L. W.; hide

    2016-01-01

    The chemical link between isoprene and formaldehyde (HCHO) is a strong, non-linear function of NOx (= NO + NO2). This relationship is a linchpin for top-down isoprene emission inventory verification from orbital HCHO column observations. It is also a benchmark for overall photochemical mechanism performance with regard to VOC oxidation. Using a comprehensive suite of airborne in situ observations over the southeast US, we quantify HCHO production across the urban-rural spectrum. Analysis of isoprene and its major first-generation oxidation products allows us to define both a prompt yield of HCHO (molecules of HCHO produced per molecule of freshly emitted isoprene) and the background HCHO mixing ratio (from oxidation of longer-lived hydrocarbons). Over the range of observed NOx values (roughly 0.1 - 2 ppbv), the prompt yield increases by a factor of 3 (from 0.3 to 0.9 ppbv ppbv(exp. -10), while background HCHO increases by a factor of 2 (from 1.6 to 3.3 ppbv). We apply the same method to evaluate the performance of both a global chemical transport model (AM3) and a measurement-constrained 0-D steady-state box model. Both models reproduce the NOx dependence of the prompt HCHO yield, illustrating that models with updated isoprene oxidation mechanisms can adequately capture the link between HCHO and recent isoprene emissions. On the other hand, both models underestimate background HCHO mixing ratios, suggesting missing HCHO precursors, inadequate representation of later-generation isoprene degradation and/or underestimated hydroxyl radical concentrations. Detailed process rates from the box model simulation demonstrate a 3-fold increase in HCHO production across the range of observed NOx values, driven by a 100% increase in OH and a 40% increase in branching of organic peroxy radical reactions to produce HCHO.

  13. Effect of an ozone-generating air-purifying device on reducing concentrations of formaldehyde in air

    Energy Technology Data Exchange (ETDEWEB)

    Esswein, E.J. [Univ. of Utah School of Medicine, Salt Lake City, UT (United States); Boeniger, M.F. [National Institute for Occupational Safety, Cincinnati, OH (United States)

    1994-02-01

    Formaldehyde, an air contaminant found in many indoor air investigations, poses distinct occupational exposure hazards in certain job categories (e.g., mortuary science) but is also of concern when found or suspected in office buildings and homes. A variety of air-purifying devices (APDs) are currently available or marketed for application to reduce or remove concentrations of a variety of indoor air pollutants through the use of ozone as a chemical oxidant. An investigation was conducted to determine if concentrations of formaldehyde similar to those found in industrial hygiene evaluations of funeral homes could be reduced with the use of an ozone-generating APD. An ozone-generating APD was placed in an exposure chamber and formaldehyde-containing embalming solution was allowed to evaporate naturally, creating peak and mean chamber concentrations of 2.5 and 1.3 ppm, respectively. Continuous-reading instruments were used to sample for formaldehyde and ozone. Active sampling methods were also used to sample simultaneously for formaldehyde and a possible reactant product, formic acid. Triplicate measurements were made in each of three evaluations: formaldehyde alone, ozone alone, and formaldehyde and ozone combined. Concentrations of formaldehyde were virtually identical with and without 0.5 ppm ozone. No reduction in formaldehyde concentration was found during a 90-minute evaluation using ozone at this concentration with peak and average concentrations of approximately 2.5 and 1.3 ppm formaldehyde, respectively. The results of this investigation suggest that the use of ozone is ineffective in reducing concentrations of formaldehyde. Because ozone has demonstrated health hazards, and is a regulated air contaminant in both the occupational and ambient environment, the use of ozone as an air purification agent in indoor air does not seem warranted. 25 refs., 5 figs., 4 tabs.

  14. ATOMIC-STRUCTURE OF THE CUBIC CORE OF THE PYRUVATE-DEHYDROGENASE MULTIENZYME COMPLEX

    NARCIS (Netherlands)

    MATTEVI, A; OBMOLOVA, G; SCHULZE, E; KALK, KH; WESTPHAL, AH; DEKOK, A; HOL, WGJ

    1992-01-01

    The highly symmetric pyruvate dehydrogenase multienzyme complexes have molecular masses ranging from 5 to 10 million daltons. They consist of numerous copies of three different enzymes: pyruvate dehydrogenase, dihydrolipoyl transacetylase, and lipoamide dehydrogenase. The three-dimensional crystal

  15. Enzymatic urea adaptation: lactate and malate dehydrogenase in elasmobranchs

    Czech Academy of Sciences Publication Activity Database

    Lagana, G.; Bellocco, E.; Mannucci, C.; Leuzzi, U.; Tellone, E.; Kotyk, Arnošt; Galtieri, A.

    2006-01-01

    Roč. 55, č. 6 (2006), s. 675-688 ISSN 0862-8408 Institutional research plan: CEZ:AV0Z50110509 Keywords : elasmobranchs * lactate dehydrogenase * malate dehydrogenase Subject RIV: CE - Biochemistry Impact factor: 2.093, year: 2006

  16. Cloning and expression analysis of alcohol dehydrogenase ( Adh ...

    African Journals Online (AJOL)

    Hybrid promoters are created by shuffling of DNA fragments while keeping intact regulatory regions crucial of promoter activity. Two fragments of alcohol dehydrogenase (Adh) promoter from Zea mays were selected to generate hybrid promoter. Sequence analysis of both alcohol dehydrogenase promoter fragments through ...

  17. Study on the triphenyl tetrazolium chloride– dehydrogenase activity ...

    African Journals Online (AJOL)

    A quick analysis of the sludge activity method based on triphenyltetrazolium chloride-dehydrogenase activity (TTC-DHA) was developed to change the rule and status of the biological activity of the activated sludge in tomato paste wastewater treatment. The results indicate that dehydrogenase activity (DHA) can effectively ...

  18. Some Properties of Glutamate Dehydrogenase from the Marine Red ...

    African Journals Online (AJOL)

    Keywords: ammonia assimilation, glutamate dehydrogenase, GDH, Gracilaria sordida, red alga, enzyme activity. Glutamate dehydrogenases (GDH, EC ... Anabolic functions could be assimilation of ammonia released during photorespiration and synthesis of N-rich transport compounds. Western Indian Ocean Journal of ...

  19. INFLUENCE OF SELECTED PHARMACEUTICALS ON ACTIVATED SLUDGE DEHYDROGENASE ACTIVITY

    Directory of Open Access Journals (Sweden)

    Agnieszka Tomska

    2016-06-01

    The aim of this work was to evaluate the effect of selected antibiotics - sulfanilamide and erythromycin on activated sludge dehydrogenase activity with use of trifenyltetrazolinum chloride (TTC test. Dehydrogenases activity is an indicator of biochemical activity of microorganisms present in activated sludge or the ability to degrade organic compounds in waste water. TTC test is particularly useful for the regularity of the course of treatment, in which the presence of inhibitors of biochemical reactions and toxic compounds are present. It was observed that the dehydrogenase activity decreases with the increase of a antibiotics concentration. The lowest value of the dehydrogenase activity equal to 32.4 μmol TF / gMLSS obtained at sulfanilamide concentration 150mg / l. For this sample, an inhibition of dehydrogenase activity was 31%.

  20. Determination of free formaldehyde in cosmetics containing formaldehyde-releasing preservatives by reversed-phase dispersive liquid-liquid microextraction and liquid chromatography with post-column derivatization.

    Science.gov (United States)

    Miralles, Pablo; Chisvert, Alberto; Alonso, M José; Hernandorena, Sandra; Salvador, Amparo

    2018-03-30

    An analytical method for the determination of traces of formaldehyde in cosmetic products containing formaldehyde-releasing preservatives has been developed. The method is based on reversed-phase dispersive liquid-liquid microextraction (RP-DLLME), that allows the extraction of highly polar compounds, followed by liquid chromatography-ultraviolet/visible (LC-UV/vis) determination with post-column derivatization. The variables involved in the RP-DLLME process were studied to provide the best enrichment factors. Under the selected conditions, a mixture of 500 μL of acetonitrile (disperser solvent) and 50 μL of water (extraction solvent) was rapidly injected into 5 mL of toluene sample solution. The extracts were injected into the LC-UV/vis system using phosphate buffer 6 mmol L -1 at pH 2 as mobile phase. After chromatographic separation, the eluate merged with a flow stream of pentane-2,4-dione in ammonium acetate solution as derivatizing reagent and passed throughout a post-column reactor at 85 °C in order to derivatize formaldehyde into 3,5-diacetyl-1,4-dihydrolutidine, according to Hantzsch reaction, which was finally measured spectrophotometrically at 407 nm. The method was successfully validated showing good linearity, an enrichment factor of 86 ± 2, limits of detection and quantification of 0.7 and 2.3 ng mL -1 , respectively, and good repeatability (RSD < 9.2%). Finally, the proposed analytical method was applied to the determination of formaldehyde in different commercial cosmetic samples containing formaldehyde-releasing preservatives, such as bronopol, diazolidinyl urea, imidazolidinyl urea, and DMDM hydantoin, with good relative recovery values (91-113%) thus showing that matrix effects were negligible. The good analytical features of the proposed method besides of its simplicity and affordability, make it useful to carry out the quality control of cosmetic products containing formaldehyde-releasing preservatives. Copyright

  1. Impact of endophytic colonization patterns on Zamioculcas zamiifolia stress response and in regulating ROS, tryptophan and IAA levels under airborne formaldehyde and formaldehyde-contaminated soil conditions.

    Science.gov (United States)

    Khaksar, Gholamreza; Treesubsuntorn, Chairat; Thiravetyan, Paitip

    2017-05-01

    Deeper understanding of plant-endophyte interactions under abiotic stress would provide new insights into phytoprotection and phytoremediation enhancement. Many studies have investigated the positive role of plant-endophyte interactions in providing protection to the plant against pollutant stress through auxin (indole-3-acetic acid (IAA)) production. However, little is known about the impact of endophytic colonization patterns on plant stress response in relation to reactive oxygen species (ROS) and IAA levels. Moreover, the possible effect of pollutant phase on plant stress response is poorly understood. Here, we elucidated the impact of endophytic colonization patterns on plant stress response under airborne formaldehyde compared to formaldehyde-contaminated soil. ROS, tryptophan and IAA levels in the roots and shoots of endophyte-inoculated and non-inoculated plants in the presence and absence of formaldehyde were measured. Strain-specific quantitative polymerase chain reaction (qPCR) was used to investigate dynamics of endophyte colonization. Under the initial exposure to airborne formaldehyde, non-inoculated plants accumulated more tryptophan in the shoots (compared to the roots) to synthesize IAA. However, endophyte-inoculated plants behaved differently as they synthesized and accumulated more tryptophan in the roots and, hence, higher levels of IAA accumulation and exudation within roots which might act as a signaling molecule to selectively recruit B. cereus ERBP. Under continuous airborne formaldehyde stress, higher levels of ROS accumulation in the shoots pushed the plant to synthesize more tryptophan and IAA in the shoots (compared to the roots). Higher levels of IAA in the shoots might act as the potent driving force to relocalize B. cereus ERBP from roots to the shoots. In contrast, under formaldehyde-contaminated soil, B. cereus ERBP colonized root tissues without moving to the shoots since there was a sharp increase in ROS, tryptophan and IAA

  2. Susceptibility of Mycobacterium immunogenum and Pseudomonas fluorescens to formaldehyde and non-formaldehyde biocides in semi-synthetic metalworking fluids.

    Science.gov (United States)

    Selvaraju, Suresh B; Khan, Izhar U H; Yadav, Jagjit S

    2011-01-20

    Mycobacterium immunogenum, a newly identified member of the Mycobacterium chelonae_M. abscessus complex is considered a potential etiological agent for hypersensitivity pneumonitis (HP) in machine workers exposed to contaminated metalworking fluid (MWF). This study investigated the biocidal efficacy of the frequently applied commercial formaldehyde-releasing (HCHO) biocides Grotan and Bioban CS 1135 and non-HCHO type biocides Kathon 886 MW (isothiazolone) and Preventol CMK 40 (phenolic) toward this emerging mycobacterial species (M. immunogenum) in HP-linked MWFs, alone and in presence of a representative of the Gram-negative bacterial contaminants, Pseudomonas fluorescens, using two semi-synthetic MWF matrices (designated Fluid A and Fluid B). Relative biocide susceptibility analysis indicated M immunogenum to be comparatively more resistant (2-1600 fold) than P. fluorescens to the tested biocides under the varied test conditions. In terms of minimum inhibitory concentration, Kathon was the most effective biocide against M. immunogenum. Fluid factors had a major effect on the biocide susceptibility. Fluid A formulation provided greater protective advantage to the test organisms than Fluid B. Fluid dialysis (Fluid A) led to an increased biocidal efficacy of Grotan, Kathon and Preventol against M. immunogenum further implying the role of native fluid components. Used fluid matrix, in general, increased the resistance of the two test organisms against the biocides, with certain exceptions. M. immunogenum resistance increased in presence of the co-contaminant P. fluorescens. Collectively, the results show a multifactorial nature of the biocide susceptibility of MWF-colonizing mycobacteria and highlight the importance of more rigorous efficacy testing and validation of biocides prior to and during their application in metalworking fluid operations.

  3. Susceptibility of Mycobacterium immunogenum and Pseudomonas fluorescens to Formaldehyde and Non-Formaldehyde Biocides in Semi-Synthetic Metalworking Fluids

    Directory of Open Access Journals (Sweden)

    Suresh B. Selvaraju

    2011-01-01

    Full Text Available Mycobacterium immunogenum, a newly identified member of the Mycobacterium chelonae_M. abscessus complex is considered a potential etiological agent for hypersensitivity pneumonitis (HP in machine workers exposed to contaminated metalworking fluid (MWF. This study investigated the biocidal efficacy of the frequently applied commercial formaldehyde-releasing (HCHO biocides Grotan and Bioban CS 1135 and non-HCHO type biocides Kathon 886 MW (isothiazolone and Preventol CMK 40 (phenolic toward this emerging mycobacterial species (M. immunogenum in HP-linked MWFs, alone and in presence of a representative of the Gram-negative bacterial contaminants, Pseudomonas fluorescens, using two semi-synthetic MWF matrices (designated Fluid A and Fluid B. Relative biocide susceptibility analysis indicated M immunogenum to be comparatively more resistant (2–1600 fold than P. fluorescens to the tested biocides under the varied test conditions. In terms of minimum inhibitory concentration, Kathon was the most effective biocide against M. immunogenum. Fluid factors had a major effect on the biocide susceptibility. Fluid A formulation provided greater protective advantage to the test organisms than Fluid B. Fluid dialysis (Fluid A led to an increased biocidal efficacy of Grotan, Kathon and Preventol against M. immunogenum further implying the role of native fluid components. Used fluid matrix, in general, increased the resistance of the two test organisms against the biocides, with certain exceptions. M. immunogenum resistance increased in presence of the co-contaminant P. fluorescens. Collectively, the results show a multifactorial nature of the biocide susceptibility of MWF-colonizing mycobacteria and highlight the importance of more rigorous efficacy testing and validation of biocides prior to and during their application in metalworking fluid operations.

  4. Genetic engineering of baker's and wine yeasts using formaldehyde hyperresistance-mediating plasmids

    Directory of Open Access Journals (Sweden)

    M. Schmidt

    1997-12-01

    Full Text Available Yeast multi-copy vectors carrying the formaldehyde-resistance marker gene SFA have proved to be a valuable tool for research on industrially used strains of Saccharomyces cerevisiae. The genetics of these strains is often poorly understood, and for various reasons it is not possible to simply subject these strains to protocols of genetic engineering that have been established for laboratory strains of S. cerevisiae. We tested our vectors and protocols using 10 randomly picked baker's and wine yeasts all of which could be transformed by a simple protocol with vectors conferring hyperresistance to formaldehyde. The application of formaldehyde as a selecting agent also offers the advantage of its biodegradation to CO2 during fermentation, i.e., the selecting agent will be consumed and therefore its removal during down-stream processing is not necessary. Thus, this vector provides an expression system which is simple to apply and inexpensive to use

  5. RELATION BETWEEN MECHANICAL PROPERTIES AND PYROLYSIS TEMPERATURE OF PHENOL FORMALDEHYDE RESIN FOR GAS SEPARATION MEMBRANES

    Directory of Open Access Journals (Sweden)

    MONIKA ŠUPOVÁ

    2012-03-01

    Full Text Available The aim of this paper has been to characterize the relation between the pyrolysis temperature of phenol-formaldehyde resin, the development of a porous structure, and the mechanical properties for the application of semipermeable membranes for gas separation. No previous study has dealt with this problem in its entirety. Phenol-formaldehyde resin showed an increasing trend toward micropore porosity in the temperature range from 500 till 1000°C, together with closure of mesopores and macropores. Samples cured and pyrolyzed at 1000°C pronounced hysteresis of desorption branch. The ultimate bending strength was measured using a four-point arrangement that is more suitable for measuring of brittle materials. The chevron notch technique was used for determination the fracture toughness. The results for mechanical properties indicated that phenol-formaldehyde resin pyrolyzates behaved similarly to ceramic materials. The data obtained for the material can be used for calculating the technical design of gas separation membranes.

  6. [Observational study of formaldehyde in air, rain and fog water at a site on the Mangdang Mountain of Fujian, China].

    Science.gov (United States)

    Wang, Xiao-yan; Wang, Hui-xiang; Ma, Yi-yuan

    2010-08-01

    Through 2,4-dinitrophenylhydrazine (DNPH) high-performance liquid chromatography (HPLC) method, the levels of formaldehyde in ambient air, rain and fog samples were measured in Mangdang Mountain, Fujian Province, from March to April 2009. The average concentrations of formaldehyde in ambient air, rain and fog are 4.0 x 10(-10), 2.19 micromol/L and 2.94 micromol/L, respectively. Based on previous researches, this study described formaldehyde hydrolysis and reacting with S(IV) and other chemical reaction processes in liquid phase, explaining the phenomenon that the solubility of formaldehyde in the liquid phase is higher than the theoretical value. On-site measured Henry coefficients (Hme) and the effective Henry coefficients (H*) were derived from concentration of formaldehyde in ambient air, rain and fog samples and references. Comparing Hme and H*, this study found that the measured liquid phase concentrations of formaldehyde are higher than the theoretical concentrations, consistent with the references. The further founding is that Hme/H* in fog is higher than in rain, proving the result of Mangdang Mountain that the concentration of formaldehyde in fog is higher than in rain. Considering the climatic characteristics of Mangdang Mountain in spring, the wet deposition of formaldehyde is an important way in this area.

  7. Multicenter Patch Testing With a Resol Resin Based on Phenol and Formaldehyde Within the International Contact Dermatitis Research Group

    DEFF Research Database (Denmark)

    Isaksson, M.; Ale, I.; Andersen, Klaus Ejner

    2015-01-01

    .2%) reacted to PFR-2. Of those 28 individuals, one had a positive reaction to formaldehyde and 2 to p-tertiary-butylphenol-formaldehyde resin. Simultaneous allergic reactions were noted to colophonium in 3, to Myroxylon pereirae in 5, and to fragrance mix I in 8. Conclusions The contact allergy frequency...

  8. Effects of Endogenous Formaldehyde in Nasal Tissues on Inhaled Formmaldehyde Dosimetry Predictions in the Rat, Monkey, and Human Nasal Passages

    Science.gov (United States)

    ABSTRACT Formaldehyde, a nasal carcinogen, is also an endogenous compound that is present in all living cells. Due to its high solubility and reactivity, quantitative risk estimates for inhaled formaldehyde rely on internal dose calculations in the upper respiratory tract which ...

  9. Hydroxymethylation beyond Carbonylation: Enantioselective Iridium Catalyzed Reductive Coupling of Formaldehyde with Allylic Acetates via Enantiotopic ?-Facial Discrimination

    OpenAIRE

    Garza, Victoria J.; Krische, Michael J.

    2016-01-01

    Chiral iridium complexes modified by SEGPHOS catalyze the 2-propanol mediated reductive coupling of branched allylic acetates 1a?1o with formaldehyde to form primary homoallylic alcohols 2a?2o with excellent control of regio- and enantioselectivity. These processes, which rely on enantiotopic ?-facial discrimination of ?-allyliridium intermediates, represent the first examples of enantioselective formaldehyde C-C coupling beyond aldol addition.

  10. THE EFFECT OF FORMALDEHYDE EXPOSURE AND YOGURT SUPPLEMENTATION ON PROFILE AND CHARACTER OF HEPAR TISSUE PROTEIN OF RATS (Rattus norvegicus

    Directory of Open Access Journals (Sweden)

    Chanif Mahdi

    2010-06-01

    Full Text Available Formaldehyde is a simplest organic compound of aldehyde or alkanal group. Formaldehyde is a toxic and carcinogenic substance. Formaldehyde contamination through food or feeding diet continuously is very dangerous for the body, especially for bodies organ for instances likes hepar and kidney. Because formaldehyde is sources of reactive oxygen species (ROS and free radicals substances for the body. This purpose of the study is to know the effect of formaldehyde exposure and yogurt supplementation on profile and characters of rats (Rattus norvegicus protein hepar tissues. The research methods is laboratory methods. The protein profiles determined by electrophoresis (SDS-PAGE methods. The character of hepar protein tissue determined by ELISA, Dot Blot and Western Blot methods. The result showed that formaldehyde exposure through the feeding diet of rats affect on profile of hepar protein tissue, that characterized by appear of new band of specific protein with molecule weigh is 29.6 kDa (PSForm 29.6. Yogurt supplementation on rat that exposure by formaldehyde through the feeding diet of rat, that characterized by expressing of new band of specific protein with relative molecule weight 24.8 kDa (PSYogh 24.8 kDa, and followed by depressed or dispear of protein specific band of 29.6 kDa(PSForm 29.6 kDa. The result showed that isolated protein PSForm 29.6 kDa have a antigenecity character.   Keywords: Formaldehyde exposure, yogurt, ROS, profile and protein character

  11. Second-generation method for analysis of chromatin binding with formaldehyde-cross-linking kinetics.

    Science.gov (United States)

    Zaidi, Hussain; Hoffman, Elizabeth A; Shetty, Savera J; Bekiranov, Stefan; Auble, David T

    2017-11-24

    Formaldehyde-cross-linking underpins many of the most commonly used experimental approaches in the chromatin field, especially in capturing site-specific protein-DNA interactions. Extending such assays to assess the stability and binding kinetics of protein-DNA interactions is more challenging, requiring absolute measurements with a relatively high degree of physical precision. We previously described an experimental framework called the cross-linking kinetics (CLK) assay, which uses time-dependent formaldehyde-cross-linking data to extract kinetic parameters of chromatin binding. Many aspects of formaldehyde behavior in cells are unknown or undocumented, however, and could potentially affect CLK data analyses. Here, we report biochemical results that better define the properties of formaldehyde-cross-linking in budding yeast cells. These results have the potential to inform interpretations of "standard" chromatin assays, including chromatin immunoprecipitation. Moreover, the chemical complexity we uncovered resulted in the development of an improved method for measuring binding kinetics with the CLK approach. Optimum conditions included an increased formaldehyde concentration and more robust glycine-quench conditions. Notably, we observed that formaldehyde-cross-linking rates can vary dramatically for different protein-DNA interactions in vivo Some interactions were cross-linked much faster than the in vivo macromolecular interactions, making them suitable for kinetic analysis. For other interactions, we found the cross-linking reaction occurred on the same time scale or slower than binding dynamics; for these interactions, it was sometimes possible to compute the in vivo equilibrium-binding constant but not binding on- and off-rates. This improved method yields more accurate in vivo binding kinetics estimates on the minute time scale. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  12. Treatment of marine sewage pumpout and RV park pumpout wastewater containing high strength concentrations of formaldehyde

    Energy Technology Data Exchange (ETDEWEB)

    Salonich, J. [Venturi Aeration Inc., Pelham, New Hampshire (United States)

    2002-06-15

    'Full text:' A consortium of companies has developed an integrated 'on-site' wastewater treatment technology that is capable of handling and degrading RV Park and Marine Sewage Pumpout Wastes which contain formaldehyde [35 - 80 mg/L]. Boat and RV owners add formaldehyde to their toilets to eliminate odors. When these materials are pumped out they are high in solids content and have high concentrations of HCHO, which makes them difficult to degrade at POTWs. At the heart of this process is 1. An aeration tank with a Venturi Aerator totally external to the tank and 2. The addition of a blend of cultured bacteria that have selected for their ability to degrade formaldehyde. For a complete 'on-site' treatment system Bioclere Trickling Filters can follow this aeration/bacterial treatment system. This is an ideal system configuration for remote locations (RV Parks) or for fresh water lake Marinas looking to reduce their disposal costs and for groundwater discharge with no adverse effect on water quality. Until the development of the formaldehyde degrading bacteria for an industrial wastewater process there were no cultures commercially available specifically for degrading formaldehyde. The most commonly used bacteria were pseudomonas strains for carbohydrate or hydrocarbon wastewater extracted from activated sludge plants. And since formaldehyde is infinitely soluble in a liquid it is difficult to degrade or mineralize. The process in an activated sludge WWTP plant took over 72 hours. With the newly selected consortia of cultures, HCHO can be degraded in 12-14 hours on a batch basis. This is accomplished in a uniquely configured aeration tank where the 'environment' of the tank is constantly conditioned by a Venturi Aerator which strips carbon dioxide generated by the aerobes to maintain a neutral pH, and provide high levels of DO (>5.0 mg/L) to keep the process aerobic. (author)

  13. Treatment of marine sewage pumpout and RV park pumpout wastewater containing high strength concentrations of formaldehyde

    International Nuclear Information System (INIS)

    Salonich, J.

    2002-01-01

    'Full text:' A consortium of companies has developed an integrated 'on-site' wastewater treatment technology that is capable of handling and degrading RV Park and Marine Sewage Pumpout Wastes which contain formaldehyde [35 - 80 mg/L]. Boat and RV owners add formaldehyde to their toilets to eliminate odors. When these materials are pumped out they are high in solids content and have high concentrations of HCHO, which makes them difficult to degrade at POTWs. At the heart of this process is 1. An aeration tank with a Venturi Aerator totally external to the tank and 2. The addition of a blend of cultured bacteria that have selected for their ability to degrade formaldehyde. For a complete 'on-site' treatment system Bioclere Trickling Filters can follow this aeration/bacterial treatment system. This is an ideal system configuration for remote locations (RV Parks) or for fresh water lake Marinas looking to reduce their disposal costs and for groundwater discharge with no adverse effect on water quality. Until the development of the formaldehyde degrading bacteria for an industrial wastewater process there were no cultures commercially available specifically for degrading formaldehyde. The most commonly used bacteria were pseudomonas strains for carbohydrate or hydrocarbon wastewater extracted from activated sludge plants. And since formaldehyde is infinitely soluble in a liquid it is difficult to degrade or mineralize. The process in an activated sludge WWTP plant took over 72 hours. With the newly selected consortia of cultures, HCHO can be degraded in 12-14 hours on a batch basis. This is accomplished in a uniquely configured aeration tank where the 'environment' of the tank is constantly conditioned by a Venturi Aerator which strips carbon dioxide generated by the aerobes to maintain a neutral pH, and provide high levels of DO (>5.0 mg/L) to keep the process aerobic. (author)

  14. Gene expression profiling in lung tissues from rats exposed to formaldehyde.

    Science.gov (United States)

    Sul, Donggeun; Kim, Hyunsook; Oh, Eunha; Phark, Sohee; Cho, Eunkyung; Choi, Seonyoung; Kang, Hyung-Sik; Kim, Eun-Mi; Hwang, Kwang-Woo; Jung, Woon-Won

    2007-08-01

    Formaldehyde is a ubiquitous toxic organic compound recently classified as a carcinogen by the International Agency for Research on Cancer and one of the major factors causing sick building syndrome. In this study, we have investigated the effects of formaldehyde on mRNA expression in rat lung tissues by applying genomics. Rats were exposed to ambient air and two different concentrations of formaldehyde (0, 5, 10 ppm) for 2 weeks at 6 h/day and 5 days/week in an inhalation chamber. Malondialdehyde (MDA) assay and carbonyl spectrometric assay were conducted to determine lipid peroxidation and protein oxidation levels and Comet assays were used for genotoxicity evaluation. Level of MDA, carbonyl insertion and DNA damage in the lungs of rats exposed to FA were found to be dose dependently increased. Gene expression was evaluated by using a bio-array hybridization analysis. A total of 21 (2 up- and 19 down-regulated) genes were identified as biomarkers for formaldehyde effects. Several differentiated gene groups were found. Genes involved in apoptosis, immunity, metabolism, signal transduction, transportation, coagulation and oncogenesis were found to be up- and down-regulated. Among these genes, the mRNA expressions of cytochrome P450, hydroxymethylbilane synthase, glutathione reductase, carbonic anhydrase 2, natriuretic peptide receptor 3, lysosomal associated protein transmembrane 5, regulator of G-protein signaling 3, olfactomedin related ER localized protein, and poly (ADP-ribose) polymerase-1 were confirmed by quantitative RT-PCR analysis. In summary, the MDA lipid peroxidation and the carbonyl protein oxidation assays showed that cytotoxic effects increased with increasing formaldehyde levels. Genomic analysis showed that 21 genes were up- or down-regulated. Of these genes, nine were confirmed by quantitative RT-PCR and could be potential biomarkers for human diseases associated with formaldehyde exposure.

  15. Mortality From Lymphohematopoietic Malignancies and Brain Cancer Among Embalmers Exposed to Formaldehyde

    Science.gov (United States)

    Hauptmann, Michael; Stewart, Patricia A.; Lubin, Jay H.; Hornung, Richard W.; Herrick, Robert F.; Hoover, Robert N.; Fraumeni, Joseph F.; Blair, Aaron; Hayes, Richard B.

    2009-01-01

    Background Excess mortality from lymphohematopoietic malignancies, in particular myeloid leukemia, and brain cancer has been found in surveys of anatomists, pathologists, and funeral industry workers, all of whom may have worked with formaldehyde. We investigated the relation of mortality to work practices and formaldehyde exposure levels among these professionals to address cancer risk in the funeral industry. Methods Professionals employed in the funeral industry who died between January 1, 1960, and January 1, 1986, from lymphohematopoietic malignancies (n = 168) or brain tumors (n = 48) (ie, case subjects) were compared with deceased matched control subjects (n = 265) with regard to lifetime work practices and exposures in the funeral industry, which were obtained by interviews with next of kin and coworkers, and to estimated levels of formaldehyde exposure. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated by use of logistic regression. All statistical tests were two-sided. Results Mortality from myeloid leukemia increased statistically significantly with increasing number of years of embalming (P for trend = .020) and with increasing peak formaldehyde exposure (P for trend = .036). Compared with subjects who performed fewer than 500 lifetime embalmings, mortality from myeloid leukemia was elevated among those who performed embalmings for more than 34 years (OR = 3.9, 95% CI = 1.2 to 12.5, P = .024), who performed more than 3068 embalmings (OR = 3.0, 95% CI = 1.0 to 9.2, P = .057), and those whose estimated cumulative formaldehyde exposure exceeded 9253 parts per million–hours (OR = 3.1; 95% CI = 1.0 to 9.6, P = .047). These exposures were not related to other lymphohematopoietic malignancies or to brain cancer. Conclusion Duration of embalming practice and related formaldehyde exposures in the funeral industry were associated with statistically significantly increased risk for mortality from myeloid leukemia. PMID:19933446

  16. Health Risk Assessment of Inhalation Exposure to Formaldehyde and Benzene in Newly Remodeled Buildings, Beijing

    Science.gov (United States)

    Huang, Lihui; Mo, Jinhan; Sundell, Jan; Fan, Zhihua; Zhang, Yinping

    2013-01-01

    Objective To assess health risks associated with inhalation exposure to formaldehyde and benzene mainly emitted from building and decoration materials in newly remodeled indoor spaces in Beijing. Methods We tested the formaldehyde and benzene concentrations in indoor air of 410 dwellings and 451 offices remodeled within the past year, in which the occupants had health concerns about indoor air quality. To assess non-carcinogenic health risks, we compared the data to the health guidelines in China and USA, respectively. To assess carcinogenic health risks, we first modeled indoor personal exposure to formaldehyde and benzene using the concentration data, and then estimated the associated cancer risks by multiplying the indoor personal exposure by the Inhalation Unit Risk values (IURs) provided by the U.S. EPA Integrated Risk Information System (U.S. EPA IRIS) and the California Office of Environmental Health Hazard Assessment (OEHHA), respectively. Results (1) The indoor formaldehyde concentrations of 85% dwellings and 67% offices were above the acute Reference Exposure Level (REL) recommended by the OEHHA and the concentrations of all tested buildings were above the chronic REL recommended by the OEHHA; (2) The indoor benzene concentrations of 12% dwellings and 32% offices exceeded the reference concentration (RfC) recommended by the U.S. EPA IRIS; (3) The median cancer risks from indoor exposure to formaldehyde and benzene were 1,150 and 106 per million (based on U.S. EPA IRIS IURs), 531 and 394 per million (based on OEHHA IURs). Conclusions In the tested buildings, formaldehyde exposure may pose acute and chronic non-carcinogenic health risks to the occupants, whereas benzene exposure may pose chronic non-carcinogenic risks to the occupants. Exposure to both compounds is associated with significant carcinogenic risks. Improvement in ventilation, establishment of volatile organic compounds (VOCs) emission labeling systems for decorating and refurbishing materials

  17. Enantiocomplementary Yarrowia lipolytica Oxidoreductases: Alcohol Dehydrogenase 2 and Short Chain Dehydrogenase/Reductase

    Directory of Open Access Journals (Sweden)

    Margit Winkler

    2013-08-01

    Full Text Available Enzymes of the non-conventional yeast Yarrowia lipolytica seem to be tailor-made for the conversion of lipophilic substrates. Herein, we cloned and overexpressed the Zn-dependent alcohol dehydrogenase ADH2 from Yarrowia lipolytica in Escherichia coli. The purified enzyme was characterized in vitro. The substrate scope for YlADH2 mediated oxidation and reduction was investigated spectrophotometrically and the enzyme showed a broader substrate range than its homolog from Saccharomyces cerevisiae. A preference for secondary compared to primary alcohols in oxidation direction was observed for YlADH2. 2-Octanone was investigated in reduction mode in detail. Remarkably, YlADH2 displays perfect (S-selectivity and together with a highly (R-selective short chain dehydrogenase/ reductase from Yarrowia lipolytica it is possible to access both enantiomers of 2-octanol in >99% ee with Yarrowia lipolytica oxidoreductases.

  18. Gene expression analysis of immunostained endothelial cells isolated from formaldehyde-fixated paraffin embedded tumors using laser capture microdissection--a technical report.

    Science.gov (United States)

    Kaneko, Tomoatsu; Okiji, Takashi; Kaneko, Reika; Suda, Hideaki; Nör, Jacques E

    2009-12-01

    Laser capture microdissection (LCM) allows microscopic procurement of specific cell types from tissue sections that can then be used for gene expression analysis. In conventional LCM, frozen tissues stained with hematoxylin are normally used to the molecular analysis. Recent studies suggested that it is possible to carry out gene expression analysis of formaldehyde-fixated paraffin embedded (FFPE) tissues that were stained with hematoxylin. However, it is still unclear if quantitative gene expression analyses can be performed from LCM cells from FFPE tissues that were subjected to immunostaining to enhance identification of target cells. In this proof-of-principle study, we analyzed by reverse transcription-PCR (RT-PCR) and real time PCR the expression of genes in factor VIII immunostained human endothelial cells that were dissected from FFPE tissues by LCM. We observed that immunostaining should be performed at 4 degrees C to preserve the mRNA from the cells. The expression of Bcl-2 in the endothelial cells was evaluated by RT-PCR and by real time PCR. Glyceraldehyde-3-phosphate dehydrogenase and 18S were used as house keeping genes for RT-PCR and real time PCR, respectively. This report unveils a method for quantitative gene expression analysis in cells that were identified by immunostaining and retrieved by LCM from FFPE tissues. This method is ideally suited for the analysis of relatively rare cell types within a tissue, and should improve on our ability to perform differential diagnosis of pathologies as compared to conventional LCM.

  19. Action of sulphite on plant malate dehydrogenase

    Energy Technology Data Exchange (ETDEWEB)

    Ziegler, I.

    1974-01-01

    SO/sub 3//sup 2 -/ acts on NAD- and NADP-dependent malate dehydrogenase in several ways. Firstly, SO/sub 3//sup 2 -/ favours the appearance of low MW species (65000 and 39000 daltons) in Sephadex gel chromatography. Secondly, the enzyme from which is obtained by gel chromatography with dithioerythritol plus nucleotide cofactor is changed in the presence of SO/sub 3//sup 2 -/. This is indicated by the appearance of a linear reaction (instead of curvilinear), and by the abolition of the biphasic sigmoidal kinetics on varying substrate and cofactor concentrations. Thus the inhibition of initial velocity at high substrate or cofactor concentrations is even more marked than at lower ones. Thirdly, SO/sub 3//sup 2 -/ strongly reduces the activity in substrate saturating conditions.

  20. The Formation of Formaldehyde on Interstellar Carbonaceous Grain Analogs by O/H Atom Addition

    Science.gov (United States)

    Potapov, Alexey; Jäger, Cornelia; Henning, Thomas; Jonusas, Mindaugas; Krim, Lahouari

    2017-09-01

    An understanding of possible scenarios for the formation of astrophysically relevant molecules, particularly complex organic molecules, will bring us one step closer to the understanding of our astrochemical heritage. In this context, formaldehyde is an important molecule as a precursor of methanol, which in turn is a starting point for the formation of more complex organic species. In the present experiments, for the first time, following the synthesis of CO, formaldehyde has been produced on the surface of interstellar grain analogs, hydrogenated fullerene-like carbon grains, by O and H atom bombardment. The formation of H2CO is an indication for a possible methanol formation route in such systems.

  1. Effect of Temperature on Electrical Conductivity of Guaiacol-Guanidine Hydrochloride-Formaldehyde Copolymer Resin

    Science.gov (United States)

    Kukade, S. D.; Bawankar, S. V.

    2018-02-01

    The purpose of the present paper is to report temperature dependence of electrical conductivity on Guaiacol-guanidine hydrochloride-formaldehyde copolymer resin. By using a microwave irradiation technique, various ratios of copolymer resin were synthesized from the reacting monomers, i.e., guaiacol, guanidine hydrochloride and formaldehyde. The characterization of the copolymer resins has been fulfilled by spectral methods viz. ultraviolet visible (UV visible), infrared and proton nuclear magnetic spectroscopy (1H-NMR). The solid state direct current electrical conductivity of synthesized copolymer resins has been measured as a function of temperature. The electrical conductivity values of all the copolymers have been found in the range of a semiconductor.

  2. A theoretical study of the reaction of lithium aluminum hydride with formaldehyde and cyclohexanone.

    Science.gov (United States)

    Luibrand, R T; Taigounov, I R; Taigounov, A A

    2001-11-02

    Geometries and energies of the reactants, complexes, and transition states for the reactions of lithium aluminum hydride with formaldehyde and cyclohexanone were obtained using ab initio and density functional (Becke3LYP/6-31G**) molecular orbital calculations. Two pathways for reaction with formaldehyde and four transition states corresponding to axial and equatorial attack at cyclohexanone were located. The transition state structures had reactant-like geometries. Predicted stereoselectivity of the reduction of cyclohexanone strongly favors axial approach of hydrogen, in agreement with experimental data. Analysis of the transition state structures suggests that electronic effects are more important than torsional effects in controlling stereoselectivity.

  3. Mechanistic and dose considerations for supporting adverse pulmonary physiology in response to formaldehyde

    International Nuclear Information System (INIS)

    Thompson, Chad M.; Subramaniam, Ravi P.; Grafstroem, Roland C.

    2008-01-01

    Induction of airway hyperresponsiveness and asthma from formaldehyde inhalation exposure remains a debated and controversial issue. Yet, recent evidences on pulmonary biology and the pharmacokinetics and toxicity of formaldehyde lend support for such adverse effects. Specifically, altered thiol biology from accelerated enzymatic reduction of the endogenous bronchodilator S-nitrosoglutathione and pulmonary inflammation from involvement of Th2-mediated immune responses might serve as key events and cooperate in airway pathophysiology. Understanding what role these mechanisms play in various species and lifestages (e.g., child vs. adult) could be crucial for making more meaningful inter- and intra-species dosimetric extrapolations in human health risk assessment

  4. Synthesis, Characterization and Mechanical Evaluation of the Phenol-Formaldehyde Composites

    Directory of Open Access Journals (Sweden)

    B. S. Kaith

    2008-01-01

    Full Text Available Phenol: formaldehyde ratio was varied in the synthesis of phenol- formaldehyde resin and used to prepare the composites. These composites were then evaluated for their mechanical strength on the basis of tensile strength, compressive strength and wear resistance. Composite with better strength was characterized by IR, SEM, XRD, TGA/DTA and further studies were carried out for its physico-chemical and mechanical properties like viscosity, modulus of rupture (MOR, modulus of elasticity (MOE and stress at the limit of proportionality (SP etc.

  5. Investigation of the detoxification mechanism of formaldehyde-treated tetanus toxin

    DEFF Research Database (Denmark)

    Thaysen-Andersen, Morten; Jørgensen, Sys Borcher; Wilhelmsen, Ellen Sloth

    2007-01-01

    %) of the known TeNT sequence, including the active site, was covered using the off-line LC-MS approach to investigate the tryptic digested TTd. In contrast to the results obtained from the gel-electrophoretic experiments, neither intra/inter-chain cross-links nor cross-links to external lysines were observed...... the lysine or formaldehyde concentration was Gel-electrophoretic analyses showed that inter-chain cross-linking was formaldehyde-dependent and, furthermore, revealed that inter-chain cross-linking was not the only requirement for the inactivation...

  6. Variants of glycerol dehydrogenase having D-lactate dehydrogenase activity and uses thereof

    Science.gov (United States)

    Wang, Qingzhao; Shanmugam, Keelnatham T.; Ingram, Lonnie O'Neal

    2017-08-29

    The present invention provides methods of designing and generating glycerol dehydrogenase (GlyDH) variants that have altered function as compared to a parent polypeptide. The present invention further provides nucleic acids encoding GlyDH polypeptide variants having altered function as compared to the parent polypeptide. Host cells comprising polynucleotides encoding GlyDH variants and methods of producing lactic acids are also provided in various aspects of the invention.

  7. Cloning and sequencing of the gene encoding the 72-kilodalton dehydrogenase subunit of alcohol dehydrogenase from Acetobacter aceti.

    Science.gov (United States)

    Inoue, T; Sunagawa, M; Mori, A; Imai, C; Fukuda, M; Takagi, M; Yano, K

    1989-06-01

    A genomic library of Acetobacter aceti DNA was constructed by using a broad-host-range cosmid vector. Complementation of a spontaneous alcohol dehydrogenase-deficient mutant resulted in the isolation of a plasmid designated pAA701. Subcloning and deletion analysis of pAA701 limited the region that complemented the deficiency in alcohol dehydrogenase activity of the mutant. The nucleotide sequence of this region was determined and showed that this region contained the full structural gene for the 72-kilodalton dehydrogenase subunit of the alcohol dehydrogenase enzyme complex. The predicted amino acid sequence of the gene showed homology with sequences of methanol dehydrogenase structural genes of Paracoccus denitrificans and Methylobacterium organophilum.

  8. Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones.

    Science.gov (United States)

    Buyuksari, Umit; Ayrilmis, Nadir; Avci, Erkan; Koc, Enus

    2010-01-01

    The objective of this study was to investigate some physical/mechanical properties and formaldehyde emission of particleboard containing particles of waste stone pine cone at various usage ratios using urea-formaldehyde resin. Some physical (thickness swelling, water absorption), mechanical (modulus of elasticity, modulus of rupture, internal bond strength) properties and formaldehyde emission of particleboards were evaluated. The addition of cone particle improved water resistance of the panels and greatly reduced their formaldehyde emissions. However, flexural properties and internal bond strength decreased with increasing cone particle content in the panel. The cone of the stone pine can be considered as an alternative to wood material in the manufacture of particleboard used in indoor environment due to lower thickness swelling, water absorption and formaldehyde emission.

  9. Implications of mechanical deformation and formaldehyde preservation for the identification of stage-specific characteristics of Baltic cod eggs

    DEFF Research Database (Denmark)

    Geldmacher, A.; Wieland, Kai

    1999-01-01

    The identification of developmental stages in fish eggs from plankton samples is often complicated by deformation of the embryos due to mechanical stress during the sampling procedure and by dehydration during formaldehyde fixation. The effects of formaldehyde fixation and mechanical stress on Ba...... mechanically deformed during handling were clearly distinguishable from those that died prior to catching; however, staging was generally less accurate for formaldehyde- preserved eggs when compared with living specimens.......The identification of developmental stages in fish eggs from plankton samples is often complicated by deformation of the embryos due to mechanical stress during the sampling procedure and by dehydration during formaldehyde fixation. The effects of formaldehyde fixation and mechanical stress...... on Baltic cod eggs (Gadus morhua callarias L.) were examined separately by visually comparing the morphological features of treated vs. live eggs of identical ontogenetic age. Microphotographs were made concurrently for documentation. In stage IA eggs, mechanical treatment resulted in scattered blastodiscs...

  10. An Engineering Evaluation of Spherical Resorcinol Formaldehyde Resin

    Energy Technology Data Exchange (ETDEWEB)

    Birdwell Jr, Joseph F [ORNL; Lee, Denise L [ORNL; Taylor, Paul Allen [ORNL; Collins, Robert T [ORNL; Hunt, Rodney Dale [ORNL

    2010-09-01

    A small column ion exchange (SCIX) system has been proposed for removal of cesium from caustic, supernatant, and dissolved salt solutions stored or generated from high-level tank wastes at the US Department of Energy (DOE) Hanford Site and Savannah River Sites. In both instances, deployment of SCIX systems, either in-tank or near-tank, is a means of expediting waste pretreatment and dispositioning with minimal or no new infrastructure requirements. Conceptually, the treatment approach can utilize a range of ion exchange media. Previously, both crystalline silicotitanate (CST), an inorganic, nonelutable sorbent, and resorcinol-formaldehyde (RF), an organic, elutable resin, have been considered for cesium removal from tank waste. More recently, Pacific Northwest National Laboratory (PNNL) evaluated use of SuperLig{reg_sign} 644, an elutable ion exchange medium, for the subject application. Results of testing indicate hydraulic limitations of the SuperLig{reg_sign} resin, specifically a high pressure drop through packed ion exchange columns. This limitation is likely the result of swelling and shrinkage of the irregularly shaped (granular) resin during repeated conversions between sodium and hydrogen forms as the resin is first loaded then eluted. It is anticipated that a similar flow limitation would exist in columns packed with conventional, granular RF resin. However, use of spherical RF resin is a likely means of mitigating processing limitations due to excessive pressure drop. Although size changes occur as the spherical resin is cycled through loading and elution operations, the geometry of the resin is expected to effectively mitigate the close packing that leads to high pressure drops across ion exchange columns. Multiple evaluations have been performed to determine the feasibility of using spherical RF resin and to obtain data necessary for design of an SCIX process. The work performed consisted of examination of radiation effects on resin performance

  11. FORMALDEHYDE MASERS: EXCLUSIVE TRACERS OF HIGH-MASS STAR FORMATION

    Energy Technology Data Exchange (ETDEWEB)

    Araya, E. D.; Brown, J. E. [Western Illinois University, Physics Department, 1 University Circle, Macomb, IL 61455 (United States); Olmi, L. [INAF, Osservatorio Astrofisico di Arcetri, Largo E. Fermi 5, I-50125 Firenze (Italy); Ortiz, J. Morales [University of Puerto Rico, Río Piedras Campus, Physical Sciences Department, P.O. Box 23323, San Juan, PR 00931 (United States); Hofner, P.; Creech-Eakman, M. J. [New Mexico Institute of Mining and Technology, Physics Department, 801 Leroy Place, Socorro, NM 87801 (United States); Kurtz, S. [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Apdo. Postal 3-72, 58089 Morelia, Michoacán (Mexico); Linz, H. [Max-Planck-Institut für Astronomie, Königstuhl 17, D-69117 Heidelberg (Germany)

    2015-11-15

    The detection of four formaldehyde (H{sub 2}CO) maser regions toward young high-mass stellar objects in the last decade, in addition to the three previously known regions, calls for an investigation of whether H{sub 2}CO masers are an exclusive tracer of young high-mass stellar objects. We report the first survey specifically focused on the search for 6 cm H{sub 2}CO masers toward non high-mass star-forming regions (non HMSFRs). The observations were conducted with the 305 m Arecibo Telescope toward 25 low-mass star-forming regions, 15 planetary nebulae and post-AGB stars, and 31 late-type stars. We detected no H{sub 2}CO emission in our sample of non HMSFRs. To check for the association between high-mass star formation and H{sub 2}CO masers, we also conducted a survey toward 22 high-mass star-forming regions from a Hi-GAL (Herschel infrared Galactic Plane Survey) sample known to harbor 6.7 GHz CH{sub 3}OH masers. We detected a new 6 cm H{sub 2}CO emission line in G32.74−0.07. This work provides further evidence that supports an exclusive association between H{sub 2}CO masers and young regions of high-mass star formation. Furthermore, we detected H{sub 2}CO absorption toward all Hi-GAL sources, and toward 24 low-mass star-forming regions. We also conducted a simultaneous survey for OH (4660, 4750, 4765 MHz), H110α (4874 MHz), HCOOH (4916 MHz), CH{sub 3}OH (5005 MHz), and CH{sub 2}NH (5289 MHz) toward 68 of the sources in our sample of non HMSFRs. With the exception of the detection of a 4765 MHz OH line toward a pre-planetary nebula (IRAS 04395+3601), we detected no other spectral line to an upper limit of 15 mJy for most sources.

  12. Behavioral sensitization after repeated formaldehyde exposure in rats.

    Science.gov (United States)

    Sorg, B A; Hochstatter, T

    1999-01-01

    Multiple chemical sensitivity (MCS) is a phenomenon whereby individuals report increased sensitivity to chemicals in the environment, and attribute their sensitivities to prior exposure to the same or often structurally unrelated chemicals. A leading hypothesis suggests that MCS is akin to behavioral sensitization observed in rodents after repeated exposure to drugs of abuse or environmental stressors. Sensitization occurring within limbic circuitry of the central nervous system (CNS) may explain the multisymptom complaints in individuals with MCS. The present studies represent the continuing development of an animal model for MCS, the basis of which is the CNS sensitization hypothesis. Three behaviors were assessed in rats repeatedly exposed to formaldehyde (Form) inhalation. In the first series of experiments, rats were given high-dose Form exposure (11 parts per million [ppm]; 1 h/day x 7 days) or low-dose Form exposure (1 ppm; either 1 h/day x 7 days or 1 h/day x 5 days/week x 4 weeks). Within a few days after discontinuing daily Form, cocaine-induced locomotor activity was elevated after high-dose Form or 20 days of low-dose Form inhalation. Approximately 1 month later, cocaine-induced locomotor activity remained significantly elevated in the 20-day Form-exposed rats. The second experiment assessed whether prior exposure to Form (20 days, as above) would alter the ability to condition to an odor (orange oil) paired with footshock. The results suggested a tendency to increase the conditioned fear response to the odor but not the context of the footshock box, and a decreased tendency to extinguish the conditioned fear response to odor. The third experiment examined whether CNS sensitization to daily cocaine or stress would alter subsequent avoidance responding to odor (Form). Daily cocaine significantly elevated approach responses to Form, while daily stress pretreatment produced a trend in the opposite direction, producing greater avoidance of Form. Preliminary

  13. Regulation of methylamine and formaldehyde metabolism in Arthrobacter P1. Effect of pulse-wise addition of "heterotrophic" substrates to C1 substrate-limited continuous cultures

    NARCIS (Netherlands)

    Croes, L.M.; Tiesma, L.; Dijkhuizen, L.

    1986-01-01

    The regulation of methylamine and formaldehyde metabolism in Arthrobacter P1 was investigated in carbon-limited continuous cultures. To avoid toxic effects of higher formaldehyde concentrations, formaldehyde-limited cultures were established in smooth substrate transitions from choline-limitation.

  14. External NAD(P)H dehydrogenases in Acanthamoeba castellanii mitochondria.

    Science.gov (United States)

    Antos-Krzeminska, Nina; Jarmuszkiewicz, Wieslawa

    2014-09-01

    The mitochondrial respiratory chain of plants and some fungi contains multiple rotenone-insensitive NAD(P)H dehydrogenases, of which at least two are located on the outer surface of the inner membrane (i.e., external NADH and external NADPH dehydrogenases). Annotated sequences of the putative alternative NAD(P)H dehydrogenases of the protozoan Acanthamoeba castellanii demonstrated similarity to plant and fungal sequences. We also studied activity of these dehydrogenases in isolated A. castellanii mitochondria. External NADPH oxidation was observed for the first time in protist mitochondria. The coupling parameters were similar for external NADH oxidation and external NADPH oxidation, indicating similar efficiencies of ATP synthesis. Both external NADH oxidation and external NADPH oxidation had an optimal pH of 6.8 independent of relevant ubiquinol-oxidizing pathways, the cytochrome pathway or a GMP-stimulated alternative oxidase. The maximal oxidizing activity with external NADH was almost double that with external NADPH. However, a lower Michaelis constant (K(M)) value for external NADPH oxidation was observed compared to that for external NADH oxidation. Stimulation by Ca(2+) was approximately 10 times higher for external NADPH oxidation, while NADH dehydrogenase(s) appeared to be slightly dependent on Ca(2+). Our results indicate that external NAD(P)H dehydrogenases similar to those in plant and fungal mitochondria function in mitochondria of A. castellanii. Copyright © 2014 Elsevier GmbH. All rights reserved.

  15. The Alcohol Dehydrogenase Gene Family in Melon (Cucumis melo L.: Bioinformatic Analysis and Expression Patterns

    Directory of Open Access Journals (Sweden)

    Yazhong eJin

    2016-05-01

    Full Text Available Alcohol dehydrogenases (ADH, encoded by multigene family in plants, play a critical role in plant growth, development, adaptation, fruit ripening and aroma production. Thirteen ADH genes were identified in melon genome, including 12 ADHs and one formaldehyde dehydrogenease (FDH, designated CmADH1-12 and CmFDH1, in which CmADH1 and CmADH2 have been isolated in Cantaloupe. ADH genes shared a lower identity with each other at the protein level and had different intron-exon structure at nucleotide level. No typical signal peptides were found in all CmADHs, and CmADH proteins might locate in the cytoplasm. The phylogenetic tree revealed that 13 ADH genes were divided into 3 groups respectively, namely long-, medium- and short-chain ADH subfamily, and CmADH1,3-11, which belongs to the medium-chain ADH subfamily, fell into 6 medium-chain ADH subgroups. CmADH12 may belong to the long-chain ADH subfamily, while CmFDH1 may be a Class III ADH and serve as an ancestral ADH in melon. Expression profiling revealed that CmADH1, CmADH2, CmADH10 and CmFDH1 were moderately or strongly expressed in different vegetative tissues and fruit at medium and late developmental stages, while CmADH8 and CmADH12 were highly expressed in fruit after 20 days. CmADH3 showed preferential expression in young tissues. CmADH4 only had slight expression in root. Promoter analysis revealed several motifs of CmADH genes involved in the gene expression modulated by various hormones, and the response pattern of CmADH genes to ABA, IAA and ethylene were different. These CmADHs were divided into ethylene-sensitive and –insensitive groups, and the functions of CmADHs were discussed.

  16. Bra-associated allergic contact dermatitis: p-tert-butylphenol formaldehyde resin as the culprit.

    Science.gov (United States)

    Herro, Elise M; Friedlander, Sheila F; Jacob, Sharon E

    2012-01-01

    P-tert-butylphenol formaldehyde resin (PTBPFR) is recognized as a significant source of allergic contact dermatitis in adults and children in association with athletic gear, shoes, and neoprene. To our knowledge, this is the first case report of allergic contact dermatitis with PTBPFR associated with padded foam bras. © 2011 Wiley Periodicals, Inc.

  17. 75 FR 30825 - Draft Toxicological Review of Formaldehyde in Support of Summary Information on the Integrated...

    Science.gov (United States)

    2010-06-02

    ... independent scientific peer review of the EPA draft human health assessment of formaldehyde. The peer review....aspx?key=49207 ). The public comment period and NAS scientific peer review are separate processes that... draft assessment solely for the purpose of pre-dissemination peer review under applicable information...

  18. Exposition by inhalation to the formaldehyde in the air. Source, measures and concentrations

    International Nuclear Information System (INIS)

    Del Gratta, F.; Durif, M.; Fagault, Y.; Zdanevitch, I.

    2004-12-01

    This document presents the main techniques today available to characterize the formaldehyde concentrations in the air for different contexts: urban and rural areas or around industrial installations but also indoor and occupational area. It provides information to guide laboratories and research departments. A synthesis gives also the main emissions sources of these compounds as reference concentrations measured in different environments. (A.L.B.)

  19. 78 FR 52567 - Formaldehyde Standard; Extension of the Office of Management and Budget's (OMB) Approval of...

    Science.gov (United States)

    2013-08-23

    ... (throat). Formaldehyde solutions can damage the skin and burn the eyes. The standard specifies a number of....1048). OMB Control Number: 1218-0145. Affected Public: Business or other for-profits. Number of... and dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some...

  20. [LC-MS/MS analysis of determination of strychnine and brucine in formaldehyde fixed tissue].

    Science.gov (United States)

    Zhan, Lan-fen; Liu, Ming-dong; Yan, You-yi; Ye, Yi; Wang, Wei; Wang, Zhi-hui; Zhao, Jun-hong; Liao, Lin-chuan

    2012-10-01

    To establish a method for determination of strychnine and brucine in formaldehyde fixed tissue by LC-MS/MS analysis. The samples were pretreated with solid phase extraction using SCX cartridges and separated on SB-C18 column with mobile phase 0.1% formic acid : 0.1% formic acid-acetonitrile (75:25). Electrospray ionization (ESI) source was utilized and operated in positive ion mode. Multiple reactions monitoring (MRM) mode was applied. External standard method was applied for quantitation. The chromatographic separation of strychnine and brucine in formaldehyde fixed nephritic and hepatic tissues resulted successfully. The standard curve was linear in the range of 0.002-2.0 microg/g for strychnine and brucine in formaldehyde fixed tissues, and the correlation coefficient was more than 0.996. The limits of detection (LOD) of strychnine and brucine in nephritic tissues were 0.06ng/g and 0.03 ng/g, respectively. The LOD of both chemicals were 0.3 ng/g in hepatic tissues. The extraction recovery rate was more than 74.5%. The precision of intra-day and inter-day were both less than 8.2%. Strychnine and brucine can be sensitive to be determined in formaldehyde fixed tissue by LC-MS/MS analysis. It can be applied in the forensic toxicological analysis.

  1. Intracavity absorption spectroscopy of formaldehyde from 6230 to 6420 cm(-1)

    NARCIS (Netherlands)

    Fjodorow, Peter; Hellmig, Ortwin; Baev, Valery M.; Levinsky, Howard B.; Mokhov, Anatoli V.

    We apply intracavity absorption spectroscopy for measurements of the absorption spectrum of formaldehyde, CH2O, from 6230 to 6420 cm(-1), of which only a small fraction (6351-6362 cm(-1)) has been recorded elsewhere. The measurements are performed in the cavity of a broadband Er3+-doped fiber laser,

  2. CONTINUOUS FORMALDEHYDE MEASUREMENT SYSTEM BASED ON MODIFIED FOURIER TRANSFORM INFRARED SPECTROSCOPY

    Science.gov (United States)

    EPA is developing advanced open-path and cell-based optical techniques for time-resolved measurement of priority hazardous air pollutants such as formaldehyde (HCHO). Due to its high National Air Toxics Assessment risk factor, there is increasing interest in continuous measuremen...

  3. Sensory irritation to mixtures of formaldehyde, acrolein, and acetaldehyde in rats

    NARCIS (Netherlands)

    Cassee, F.R.; Arts, J.H.E.; Groten, J.P.; Feron, V.J.

    1996-01-01

    Sensory irritation of formaldehyde (FRM), acrolein (ACR) and acetaldehyde (ACE) as measured by the decrease in breathing frequency (DBF) was studied in male Wistar rats using nose-only exposure. Groups of four rats were exposed to each of the single compounds separately or to mixtures of FRM, ACR

  4. Chromatographic analysis of the reaction of soy flour with formaldehyde and phenol for wood adhesives

    Science.gov (United States)

    Linda F. Lorenz; Charles R. Frihart; James M. Wescott

    2007-01-01

    The desire to make more biobased and lower-cost bonded wood products has led to an interest in replacing some phenol and formaldehyde in wood adhesives with soybean flour. Improved knowledge of the soy protein properties is needed to relate resin chemistry to resin performance before and after wood bonding. To expose the soy protein’s functional groups, it...

  5. Nine years of global hydrocarbon emissions based on source inversion of OMI formaldehyde observations

    NARCIS (Netherlands)

    Bauwens, Maite; Stavrakou, Trissevgeni; Müller, Jean François; De Smedt, Isabelle; Van Roozendael, Michel; Van Der Werf, Guido R.; Wiedinmyer, Christine; Kaiser, Johannes W.; Sindelarova, Katerina; Guenther, Alex

    2016-01-01

    As formaldehyde (HCHO) is a high-yield product in the oxidation of most volatile organic compounds (VOCs) emitted by fires, vegetation, and anthropogenic activities, satellite observations of HCHO are well-suited to inform us on the spatial and temporal variability of the underlying VOC sources. The

  6. Regional Sources of Atmospheric Formaldehyde and Acetaldehyde, and Implications for Atmospheric Modeling

    Science.gov (United States)

    Formaldehyde and acetaldehyde concentrations over the Eastern half of the United States are simulated with a 3-D air quality model to identify the most important chemical precursors under January and July conditions. We find that both aldehydes primarily result from photochemical...

  7. Investigation of Exposure to Formaldehyde from Preserved Biological Specimens. Status Report.

    Science.gov (United States)

    Consumer Product Safety Commission, Washington, DC.

    This investigation of formaldehyde exposure in school laboratories, where its principal source is from preserved biological specimens, was undertaken because of concern over exposure levels reported in the literature. Information was obtained in two ways. A limited survey of schools was conducted to determine extent of students' use of preserved…

  8. Pressure dependent deuterium fractionation in the formation of molecular hydrogen in formaldehyde photolysis

    DEFF Research Database (Denmark)

    Nilsson, Elna Johanna Kristina; Andersen, Vibeke Friis; Skov, Henrik

    2009-01-01

    and 1030 mbar. The relative dissociation rate kHCHO/kHCDO was found to depend strongly on pressure, varying from 1.1±0.1 at 50 mbar to 1.75±0.10 at 1030 mbar. The products of formaldehyde photodissociation are either H2+CO (molecular channel) or HCO+H (radical channel). The partitioning between...

  9. Estimating the spread rate of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer using fluorescence

    Science.gov (United States)

    Toni Antikainen; Anti Rohumaa; Christopher G. Hunt; Mari Levirinne; Mark Hughes

    2015-01-01

    In plywood production, human operators find it difficult to precisely monitor the spread rate of adhesive in real-time. In this study, macroscopic fluorescence was used to estimate spread rate (SR) of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer. This method could be an option when developing automated real-time SR measurement for...

  10. Adsorption of Pb, Cd, Zn, Cu and Hg ions on Formaldehyde and ...

    African Journals Online (AJOL)

    MICHAEL

    The calculated value from Freundlich adsorption parameter (KF) and Langmuir adsorption parameter (qmax) showed that the adsorption capacities of the metal ions are in order of Pb2+ > Cd2+ > Zn2+ > Hg2+. > Cu2+ for formaldehyde modified bean husks and Hg2+ > Cd2+ > Pb2+ > Zn2+ > Cu2+ for pyridine modified ...

  11. [Features of dyslipidemia development and insulin resistance in female workers engaged in methanol and formaldehyde production].

    Science.gov (United States)

    Taranenko, L A

    2013-01-01

    The article covers data on analyzing occupational risk of carbohydrate and lipid metabolism in female workers exosed to methanol and formaldehyde. Findings are that increased contents of the studied chemicals in the air of workplace cause more probable dyslipidemia, insuline resistence in peri-menopausal female workers, these disorders have reliable correlation with occupation.

  12. Study of reaction of benzo-1.4-dioxane with formaldehyde

    International Nuclear Information System (INIS)

    Tashbaev, G.A.; Turdialiev, M.Z.; Amonova, A.V.

    2015-01-01

    Present article is devoted to study of reaction of benzo-1.4-dioxane with formaldehyde. The reaction of oxy methylation of benzo-1.4-dioxane with aldehydes under various conditions was considered. The reaction progress and the purity of obtained products was controlled by means of thin-layer chromatography.

  13. Ethanol-Glycerin Fixation with Thymol Conservation: A Potential Alternative to Formaldehyde and Phenol Embalming

    Science.gov (United States)

    Hammer, Niels; Loffler, Sabine; Feja, Christine; Sandrock, Mara; Schmidt, Wolfgang; Bechmann, Ingo; Steinke, Hanno

    2012-01-01

    Anatomical fixation and conservation are required to prevent specimens from undergoing autolysis and decomposition. While fixation is the primary arrest of the structures responsible for autolysis and decomposition, conservation preserves the state of fixation. Although commonly used, formaldehyde has been classified as carcinogenic to humans. For…

  14. The effect of pheno-formaldehyde finishing on the properties of ...

    African Journals Online (AJOL)

    This paper examined the effect of catalyst concentration, curing time and temperature on a phenolformaldehyde finished direct dyed cotton. The grey cotton fabric was desized, scoured, bleached and dyed with chlorazol D, a direct dye. Sample of the dyed cotton were subjected to resin finishing using phenol: formaldehyde.

  15. An outbreak of contact dermatitis from toluenesulfonamide formaldehyde resin in a nail hardener

    NARCIS (Netherlands)

    de Wit, F. S.; de Groot, A. C.; Weyland, J. W.; Bos, J. D.

    1988-01-01

    8 cases of contact dermatitis from toluenesulfonamide formaldehyde resin in a nail hardener are presented. Most patients had used nail lacquers containing this resin for many years without trouble, but became sensitized to the resin shortly after the introduction of this particular nail hardener. A

  16. Pressure dependent isotopic fractionation in the photolysis of formaldehyde-d2

    DEFF Research Database (Denmark)

    Nilsson, E.J.K.; Schmidt, Johan Albrecht; Johnson, Matthew Stanley

    2014-01-01

    earlier work with HDCO vs. H2CO. The UV lamps used for photolysis emit light at wavelengths that primarily dissociate formaldehyde into molecular products, CO and H2 or D2. The isotope effect k(H2CO)/k(D2CO) Combining double low line 3.16 ± 0.03 at 1000 mbar is in good agreement...

  17. Resorcinol-formaldehyde reactions in dilute solution observed by carbon-13 NMR spectroscopy

    Science.gov (United States)

    Alfred W. Christiansen

    2000-01-01

    A recently discovered coupling agent, hydroxymethylated resorcinol (HMR), based on resorcinol-formaldehyde, can greatly enhance wood-to-epoxy resin bond durability in exterior applications. However, for HMR to be most effective, it needs to be prepared a few hours before it is applied to the...

  18. Preliminary survey report: control technology for formaldehyde emissions at Jasper Laminates, Jasper, Indiana, October 19, 1982

    Energy Technology Data Exchange (ETDEWEB)

    Mortimer, V.D.

    1983-07-29

    An onsite visit was made to Jasper Laminates, Jasper, Indiana to observe the processes used in veneering wood panels by a heater platen press method, and methods of controlling formaldehyde emissions. The facility produced panels for pianos, organs, office furniture and other wood products, using primarily the hot press process along with some radiofrequency (RF) pressing of curved panels and small parts. The glue most often used was a urea/formaldehyde resin adhesive. The hot presses were located under one large ventilated enclosure, measuring about 20 by 150 feet. There were also eight ventilation fans in the ceiling and auxiliary fans used to provide additional cooling air for workers and for the caul plates. Therefore, the primary methods of controlling formaldehyde exposure were dispersion, using auxiliary fans, and area ventilation. No partial-shift-time weighted-average formaldehyde concentrations were measured at over 1 part per million (ppm). For two workers unloading different hot presses, short-term breathing-zone concentrations occasionally reached 2 ppm. The author concludes that this facility offers the opportunity to study large-scale area ventilation with passive make-up air supply, and the appropriate use of auxiliary fans.

  19. First Results from the COFFEE Instrument: Airborne In-Situ Measurements of Formaldehyde over California

    Science.gov (United States)

    Iraci, L. T.; St Clair, J.; Marrero, J. E.; Gore, W.; Swanson, A. K.; Hanisco, T. F.

    2015-12-01

    The Compact Formaldehyde Fluorescence Experiment (COFFEE) instrument uses Non-Resonant Laser Induced Fluorescence (NR-LIF) to detect trace concentrations of formaldehyde as part of the Alpha Jet Atmospheric eXperiment (AJAX) payload. COFFEE, developed at NASA-GSFC, has a sensitivity of 100 pptv (1 sec) and can operate over a wide range of altitudes from the boundary layer to the lower stratosphere. It is mounted in an external wing pod on the Alpha Jet aircraft based at NASA-ARC, which can access altitudes from the surface up to 40,000 ft. We will present results from test flights performed in Fall 2015 over the Central Valley of California. Targets include an oil field, agricultural areas, and highways. Formaldehyde is one of the few urban pollutants that can be measured from space, and we will present plans to compare COFFEE in-situ data with space-based formaldehyde observations such as those from OMI (Aura) and OMPS (SuomiNPP).

  20. Preparation and characterization of poly (urea-formaldehyde) walled dicyclopentadiene microcapsules

    NARCIS (Netherlands)

    Xiong, W.; Zhu, G.; Tang, J.; Dong, B.; Han, N.; Xing, F.; Schlangen, H.E.J.G.

    2013-01-01

    Poly (urea-formaldehyde) (PUF) shelled dicyclopentadiene (DCPD) microcapsules were prepared by in-situ polymerization technology for self-healing concrete applications. It’s found, during the process, sodium dodecyl benzene sulfonate (SDBS) behaves better in emulsification of DCPD than other

  1. Phenol-formaldehyde reactivity with lignin in the wood cell wall

    Science.gov (United States)

    Daniel J. Yelle; John Ralph

    2016-01-01

    Latewood from Pinus taeda was reacted with alkaline phenol–formaldehyde (PF) adhesive and characterised using two-dimensional 1H–13C solution-state nuclear magnetic resonance (NMR) spectroscopy so that chemical modification of the wood cell wall polymers, after PF resol curing, could be elucidated. The...

  2. CeO2 thin film as a low-temperature formaldehyde sensor in mixed ...

    Indian Academy of Sciences (India)

    Administrator

    Centre for Nanotechnology and Advanced Biomaterials (CeNTAB) and. School of Electrical and Electronics Engineering, SASTRA University, Thanjavur 613 401, India ... a good biomarker for diagnosing lung cancer at an earlier stage (Fuchs et al 2010). Hence, there is a need for formaldehyde detection in diseases ...

  3. Characteristics of urea-formaldehyde resins as related to glue bond quality of southern pine particleboard

    Science.gov (United States)

    C. -Y. Hse

    1974-01-01

    Forty-five urea resins were formulated and replicated by factorial arrangement of three variables: molar ratio of formaldehyde to urea (1.5, 1.7, 1.9, 2.1, and 2.3), reactant concentration (35, 42.5, and 50%), and reaction temperature (75°, 85°, and 95°C).

  4. The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method.

    Directory of Open Access Journals (Sweden)

    Kamel Mohammadzadeh

    2013-06-01

    Full Text Available The aim of this study was to evaluate the effect of formaldehyde addition to Sodium Sulfide cooking liquor for chemical Pulp Production from rice straw. Rice straw (oryza sativa was collected from the rice field of Salmanshahr and was carried to the laboratory of wood and paper in Gorgan University. Digestion conditions of pulp included cooking temperature of 160 °C, digestion times of 30, 60 and 90 min and useing chemical (16, 18 and, 20% Sodium sulfite and 4 and 6% formaldehyde based on oven dry dosages weight of raw material. Four different treatments, at a Kappa number ranges of 12 - 14 were selected from each pulp In order to evaluate the effect of formaldehyde added based on Kappa number and pulp yield relations. Hand sheets with grammage of 60 g/m2 were prepared from each of pulp samples and their properties were measured using the related Tappi standard. The results indicated that the addetion of formaldehyde in sulfite liquor increased the pulp yield at the same Kappa number, accelerated delignification rate and improved delignification selectiving as well as improving the mechanical properties of paper

  5. Synthesis and cure kinetics of liquefied wood/phenol/formaldehyde resins

    Science.gov (United States)

    Hui Pan; Todd F. Shupe; Chung-Yun Hse

    2008-01-01

    Wood liquefaction was conducted at a 2/1 phenol/wood ratio in two different reactors: (1) an atmospheric three-necked flask reactor and (2) a sealed Parr reactor. The liquefied wood mixture (liquefied wood, unreacted phenol, and wood residue) was further condensed with formaldehyde under acidic conditions to synthesize two novolac-type liquefied wood/phenol/...

  6. Effects of creatine supplementation along with resistance training on urinary formaldehyde and serum enzymes in wrestlers.

    Science.gov (United States)

    Nasseri, Azadeh; Jafari, Afshar

    2016-04-01

    Formaldehyde is a cytotoxic agent produced from creatine through a metabolic pathway, and in this regard, it has been claimed that creatine supplementation could be cytotoxic. Even though the cytotoxic effects of creatine supplementation have been widely studied, yet little is known about how resistance training can alter these toxic effects. This study aimed to determine the effects of short-term creatine supplementation plus resistance training on the level of urinary formaldehyde and concentrations of serum enzymes in young male wrestlers. In a double-blind design twenty-one subjects were randomized into creatine supplementation (Cr), creatine supplementation plus resistance training (Cr + T) and placebo plus resistance training (Pl + T) groups. Participants ingested creatine (0.3 g/kg/day) or placebo for 7 days. The training protocol consisted of 3 sessions in one week, each session including three sets of 6-9 repetitions at 80-85% of one-repetition maximum for whole-body exercise. Urine and blood samples were collected at baseline and at the end of the supplementation. Creatine supplementation significantly increased the excretion rate of urinary formaldehyde in the Cr and Cr + T groups by 63.4% and 30.4%, respectively (P0.05). These findings indicate that resistance training may lower the increase of urinary formaldehyde excretion induced by creatine supplementation, suggesting that creatine consumption could be relatively less toxic when combined with resistance training.

  7. Migration of formaldehyde and melamine monomers from kitchen- and tableware made of melamine plastic

    DEFF Research Database (Denmark)

    Lund, K.H.; Petersen, J.H.

    2006-01-01

    Migration of one or both formaldehyde and/or melamine monomers was found in seven of ten tested melamine samples bought on the Danish market. The samples were a bowl, a jug, a mug, a ladle, and different cups and plates. No violation of the European Union-specific migration limits for melamine (30...

  8. 21 CFR 177.1460 - Melamine-formaldehyde resins in molded articles.

    Science.gov (United States)

    2010-04-01

    ... for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1460 Melamine... melamine is made to react with not more than 3 moles of formaldehyde in water solution. (b) The resins may... polymerization reaction control agent. Phthalic acid anhydride Do. Zinc stearate For use as lubricant. (c) The...

  9. 21 CFR 177.1900 - Urea-formaldehyde resins in molded articles.

    Science.gov (United States)

    2010-04-01

    ... for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1900 Urea... urea is made to react with not more than 2 moles of formaldehyde in water solution. (b) The resins may... polymerization-control agent. Tetrachlorophthalic acid anhydride Do. Zinc stearate For use as lubricant. (c) The...

  10. RAPID WAY TO ASSESS THE SAFETY OF PRODUCTS FROM PHENOL-FORMALDEHYDE PLASTICS

    Directory of Open Access Journals (Sweden)

    T. A. Kuchmenko

    2014-01-01

    Full Text Available Summary. An express method for determining of volatile components in the products of phenol-formaldehyde plastics is developed by detecting them in the equilibrium gas phase using the piezosensors array. The sorption of substances-marker vapor which are the main pollutants in the air diffusing from plastic household products has been studied under identical conditions. The array of 8 piezosensors is selected providing minimal impact of water vapor on the microbalance results; maximum sensitivity to one / several classes of organic compounds; identification of phenol / formaldehyde in the mixtures. A method of evaluation the level of emissions of phenol, formaldehyde, toluene, acetone from household plastic products is developed using the piezosensors array. It has been proposed the ranking samples nonfood polymers into groups according to the danger degree based on the total content of volatile organic compounds and the presence of phenol / formaldehyde. Accuracy of the phenol determination in polymers is verified by standard spectrophotometric method with 4-aminoantipyrine, it is shown the results of both methods satisfactorily converge. The proposed method can significantly reduce the economic and time costs on analysis and expand the analytical information about the content of other volatile substances in a single measurement.

  11. Study of bismuth molybdenum oxidic catalysts for methanol oxidation to formaldehyde

    International Nuclear Information System (INIS)

    Khokhler, R.Ya.; Kurina, L.N.; Kudrina, N.V.

    1982-01-01

    Phase composition and catalytic properties of bismuth molybdenum oxidic system in reaction of methanol oxidation are studied at temperature of 280-350 deg. Increase of selectivity according to formaldehyde is connected with formation of MoO 3 solid solution in bismuth molybdate Bi 2 O 3 x3MoO 3

  12. Ab initio molecular dynamics study of the reaction of water with formaldehyde in sulfuric acid solution.

    NARCIS (Netherlands)

    Sprik, M.; Meijer, E.M.

    1998-01-01

    Ab initio molecular dynamics methods have been used to study the reaction mechanism of acidcatalyzed addition of water to formaldehyde in a model system of an aqueous solution of sulfuric acid. Using the method of constraints we find that an H

  13. Determination of partition and diffusion coefficients of formaldehyde in selected building materials and impact of relative humidity.

    Science.gov (United States)

    Xu, Jing; Zhang, Jianshun S; Liu, Xiaoyu; Gao, Zhi

    2012-06-01

    The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The "green" materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K(ma)) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in "green" wallboard and "green" carpet. At the same relative humidity level, the "green" wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.

  14. Detection of Waterborne and Airborne Formaldehyde: From Amperometric Chemosensing to a Visual Biosensor Based on Alcohol Oxidase

    Directory of Open Access Journals (Sweden)

    Sasi Sigawi

    2014-02-01

    Full Text Available A laboratory prototype of a microcomputer-based analyzer was developed for quantitative determination of formaldehyde in liquid samples, based on catalytic chemosensing elements. It was shown that selectivity for the target analyte could be increased by modulating the working electrode potential. Analytical parameters of three variants of the amperometric analyzer that differed in the chemical structure/configuration of the working electrode were studied. The constructed analyzer was tested on wastewater solutions that contained formaldehyde. A simple low-cost biosensor was developed for semi-quantitative detection of airborne formaldehyde in concentrations exceeding the threshold level. This biosensor is based on a change in the color of a solution that contains a mixture of alcohol oxidase from the yeast Hansenula polymorpha, horseradish peroxidase and a chromogen, following exposure to airborne formaldehyde. The solution is enclosed within a membrane device, which is permeable to formaldehyde vapors. The most efficient and sensitive biosensor for detecting formaldehyde was the one that contained alcohol oxidase with an activity of 1.2 U·mL−1. The biosensor requires no special instrumentation and enables rapid visual detection of airborne formaldehyde at concentrations, which are hazardous to human health.

  15. Does occupational exposure to formaldehyde cause hematotoxicity and leukemia-specific chromosome changes in cultured myeloid progenitor cells?

    Science.gov (United States)

    Mundt, Kenneth A; Gallagher, Alexa E; Dell, Linda D; Natelson, Ethan A; Boffetta, Paolo; Gentry, P Robinan

    2017-08-01

    Several cross-sectional studies of a single population of workers exposed to formaldehyde at one of two factories using or producing formaldehyde-melamine resins in China have concluded that formaldehyde exposure induces damage to hematopoietic cells that originate in the bone marrow. Moreover, the investigators interpret observed differences between groups as evidence that formaldehyde induces myeloid leukemias, although the mechanisms for inducing these diseases are not obvious and recently published scientific findings do not support causation. Our objective was to evaluate hematological parameters and aneuploidy in relation to quantitative exposure measures of formaldehyde. We obtained the study data for the original study (Zhang et al. 2010 ) and performed linear regression analyses. Results showed that differences in white blood cell, granulocyte, platelet, and red blood cell counts are not exposure dependent. Among formaldehyde-exposed workers, no association was observed between individual average formaldehyde exposure estimates and frequency of aneuploidy, suggested by the original study authors to be indicators of myeloid leukemia risk.

  16. Evaluation on potential for assessing indoor formaldehyde using biosensor system based on swimming behavior of Japanese medaka (oryzias latipes)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jonghun [Department of Architecture, The University of Tokyo, 4-6-1 Komaba, Meguro-Ku, Tokyo, 153-8505 (Japan); Kato, Shinsuke; Tatsuma, Tetsu [Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-Ku, Tokyo, 153-8505 (Japan); Takeuchi, Kenichiro [Sumitomo Forestry Co., Ltd. (Japan); Kang, Ik Joon [Aquatic Biomonitoring and Environmental Laboratory, Department of Bioscience and Biotechnology, Faculty of Agriculture, Kyushu University, Fukuoka, 812-8581 (Japan)

    2011-04-15

    In order to develop an early-warning biosensor system for predicting the impact on health of long-term and low-level exposure to indoor chemical compounds, e.g. volatile organic compounds (VOCs), we evaluated the potential for assessing indoor air quality using the biosensor system based on the swimming behavior of Japanese medaka (oryzias latipes) as an indicator of indoor air quality in the beginning. As a technology to dissolve chemical compounds into water efficiently, a micro bubble generator was introduced. The test chemical was formaldehyde which is a representative of chemical compounds existing indoors. The result of the measuring solubility of formaldehyde was that formaldehyde concentration in water was raised to 0.12 mg/L when 1.0 mg/m{sup 3} of formaldehyde in air was bubbled for approximately 44 h. The correlation between the 0.1 mg/L of formaldehyde in water, which is roughly equivalent to 0.83 mg/m{sup 3} of formaldehyde in air, and the swimming activities of medaka was investigated. The fish showed abnormal behavior compared to one under a control treatment, e.g. the body movement distance decreased and the duration time near the upper water column increased significantly. It was verified that it is possible to detect concentrations of formaldehyde of 0.83 mg/m{sup 3} in indoor air using this proposed biosensor system. (author)

  17. Adsorption and photocatalytic oxidation of formaldehyde on a clay-TiO{sub 2} composite

    Energy Technology Data Exchange (ETDEWEB)

    Kibanova, Daria [Facultad de Quimica, Universidad Nacional Autonoma de Mexico (Mexico); Departamento de Procesos y Tecnologia, Universidad Autonoma Metropolitana (Mexico); Sleiman, Mohamad [Lawrence Berkeley National Laboratory, Indoor Environment Group, Environmental Energy Technologies Division (United States); Cervini-Silva, Javiera, E-mail: jcervini@correo.cua.uam.mx [Departamento de Procesos y Tecnologia, Universidad Autonoma Metropolitana (Mexico); NASA Astrobiology Institute (United States); Destaillats, Hugo, E-mail: HDestaillats@lbl.gov [Lawrence Berkeley National Laboratory, Indoor Environment Group, Environmental Energy Technologies Division (United States); Arizona State University, Department of Chemistry and Biochemistry (United States)

    2012-04-15

    Highlights: Black-Right-Pointing-Pointer Formaldehyde adsorption and photocatalytic elimination on hectorite-TiO{sub 2} nanocomposites. Black-Right-Pointing-Pointer Dark adsorption in dry air >4 times higher than P25 (reference). Black-Right-Pointing-Pointer Dark adsorption in humid air dominated by adsorbed water layer. Black-Right-Pointing-Pointer Photocatalytic removal efficiency proportional to the Ti content, increased with contact time. Black-Right-Pointing-Pointer More complete elimination with 254 + 185 nm irradiation. - Abstract: We investigated the adsorption capacity and photocatalytic removal efficiency of formaldehyde using a hectorite-TiO{sub 2} composite in a bench flow reactor. The same experimental conditions were applied to pure TiO{sub 2} (Degussa P25) as a reference. The catalysts were irradiated with either a UVA lamp (365 nm) or with one of two UVC lamps of 254 nm and 254 + 185 nm, respectively. Formaldehyde was introduced upstream at concentrations of 100-500 ppb, with relative humidity (RH) in the range 0-66% and residence times between 50 and 500 ms. Under dry air and without illumination, saturation of catalyst surfaces was achieved after {approx}200 min for P25 and {approx}1000 min for hectorite-TiO{sub 2}. The formaldehyde uptake capacity by hectorite-TiO{sub 2} was 4.1 times higher than that of P25, almost twice the BET surface area ratio. In the presence of humidity, the difference in uptake efficiency between both materials disappeared, and saturation was achieved faster (after {approx}200 min at 10% RH and {approx}60 min at 65% RH). Under irradiation with each of the three UV sources, removal efficiencies were proportional to the Ti content and increased with contact time. The removal efficiency decreased at high RH. A more complete elimination of formaldehyde was observed with the 254 + 185 nm UV source.

  18. Occupational Exposure and Health Impairments of Formaldehyde on Employees of a Wood Industry

    Directory of Open Access Journals (Sweden)

    Mohammad Javad Jafari

    2015-12-01

    Full Text Available Background: Occupational exposure to formaldehyde may decrease white blood cell counts and change blood concentration. In this study, the influences of occupational exposure to formaldehyde on the number of white blood cells and blood concentrations were studied. Methods: This case-control study was conducted in June of 2012 at North Wood Factory, Golestan Province, Iran. The US-NIOSH method No. 2541 was used to determine the occupational exposure of 30 workers of the production line (case group and 30 administrative staffs (control group to formalde­hyde. The number of white blood cells and blood concentration were determined using the normal blood count method and related indices. Demographic features as well as the symptoms of being exposed to formaldehyde were collected using a standard questionnaire. Results: The occupational exposure of case group ranged from 0.50 ppm to 1.52 ppm. The prevalence of all studied symptoms from formaldehyde exposure in workers (2formaldehyde changed the blood concentration of the studied workers but did not change the number of their white blood cells.

  19. 21 CFR 866.5560 - Lactic dehydrogenase immunological test system.

    Science.gov (United States)

    2010-04-01

    ... found in a variety of conditions, including megaloblastic anemia (decrease in the number of mature red... conditions known to cause increased lactic dehydrogenase levels. (b) Classification. Class I (general...

  20. Targeting isocitrate dehydrogenase (IDH) in cancer.

    Science.gov (United States)

    Fujii, Takeo; Khawaja, Muhammad Rizwan; DiNardo, Courtney D; Atkins, Johnique T; Janku, Filip

    2016-05-01

    Isocitrate dehydrogenase (IDH) is an essential enzyme for cellular respiration in the tricarboxylic acid (TCA) cycle. Recurrent mutations in IDH1 or IDH2 are prevalent in several cancers including glioma, acute myeloid leukemia (AML), cholangiocarcinoma and chondrosarcoma. The mutated IDH1 and IDH2 proteins have a gain-of-function, neomorphic activity, catalyzing the reduction of α-ketoglutarate (α-KG) to 2-hydroxyglutarate (2-HG) by NADPH. Cancer-associated IDH mutations block normal cellular differentiation and promote tumorigenesis via the abnormal production of the oncometabolite 2-HG. High levels of 2-HG have been shown to inhibit α-KG dependent dioxygenases, including histone and deoxyribonucleic acid (DNA) demethylases, which play a key role in regulating the epigenetic state of cells. Current targeted inhibitors of IDH1 (AG120, IDH305), IDH2 (AG221), and pan-IDH1/2 (AG881) selectively inhibit mutant IDH protein and induce cell differentiation in in vitro and in vivo models. Preliminary results from phase I clinical trials with IDH inhibitors in patients with advanced hematologic malignancies have demonstrated an objective response rate ranging from 31% to 40% with durable responses (>1 year) observed. Furthermore, the IDH inhibitors have demonstrated early signals of activity in solid tumors with IDH mutations, including cholangiocarcinomas and low grade gliomas.

  1. Novel Inhibitors Complexed with Glutamate Dehydrogenase

    Science.gov (United States)

    Li, Ming; Smith, Christopher J.; Walker, Matthew T.; Smith, Thomas J.

    2009-01-01

    Mammalian glutamate dehydrogenase (GDH) is a homohexameric enzyme that catalyzes the reversible oxidative deamination of l-glutamate to 2-oxoglutarate using NAD(P)+ as coenzyme. Unlike its counterparts from other animal kingdoms, mammalian GDH is regulated by a host of ligands. The recently discovered hyperinsulinism/hyperammonemia disorder showed that the loss of allosteric inhibition of GDH by GTP causes excessive secretion of insulin. Subsequent studies demonstrated that wild-type and hyperinsulinemia/hyperammonemia forms of GDH are inhibited by the green tea polyphenols, epigallocatechin gallate and epicatechin gallate. This was followed by high throughput studies that identified more stable inhibitors, including hexachlorophene, GW5074, and bithionol. Shown here are the structures of GDH complexed with these three compounds. Hexachlorophene forms a ring around the internal cavity in GDH through aromatic stacking interactions between the drug and GDH as well as between the drug molecules themselves. In contrast, GW5074 and bithionol both bind as pairs of stacked compounds at hexameric 2-fold axes between the dimers of subunits. The internal core of GDH contracts when the catalytic cleft closes during enzymatic turnover. None of the drugs cause conformational changes in the contact residues, but all bind to key interfaces involved in this contraction process. Therefore, it seems likely that the drugs inhibit enzymatic turnover by inhibiting this transition. Indeed, this expansion/contraction process may play a major role in the inter-subunit communication and allosteric regulation observed in GDH. PMID:19531491

  2. Eucalypt NADP-Dependent Isocitrate Dehydrogenase1

    Science.gov (United States)

    Boiffin, Vincent; Hodges, Michael; Gálvez, Susana; Balestrini, Raffaella; Bonfante, Paola; Gadal, Pierre; Martin, Francis

    1998-01-01

    NADP-dependent isocitrate dehydrogenase (NADP-ICDH) activity is increased in roots of Eucalyptus globulus subsp. bicostata ex Maiden Kirkp. during colonization by the ectomycorrhizal fungus Pisolithus tinctorius Coker and Couch. To investigate the regulation of the enzyme expression, a cDNA (EgIcdh) encoding the NADP-ICDH was isolated from a cDNA library of E. globulus-P. tinctorius ectomycorrhizae. The putative polypeptide sequence of EgIcdh showed a high amino acid similarity with plant NADP-ICDHs. Because the deduced EgICDH protein lacks an amino-terminal targeting sequence and shows highest similarity to plant cytosolic ICDHs, it probably represents a cytoplasmic isoform. RNA analysis showed that the steady-state level of EgIcdh transcripts was enhanced nearly 2-fold in ectomycorrhizal roots compared with nonmycorrhizal roots. Increased accumulation of NADP-ICDH transcripts occurred as early as 2 d after contact and likely led to the observed increased enzyme activity. Indirect immunofluorescence microscopy indicated that NADP-ICDH was preferentially accumulated in the epidermis and stele parenchyma of nonmycorrhizal and ectomycorrhizal lateral roots. The putative role of cytosolic NADP-ICDH in ectomycorrhizae is discussed. PMID:9662536

  3. Temperature-sensitive glutamate dehydrogenase mutants of Salmonella typhimurium.

    OpenAIRE

    Dendinger, S M; Brenchley, J E

    1980-01-01

    Mutants of Salmonella typhimurium defective in glutamate dehydrogenase activity were isolated in parent strains lacking glutamate synthase activity by localizcd mutagenesis or by a general mutagenesis combined with a cycloserine enrichment for glutamate auxotrophs. Two mutants with temperature-sensitive phenotypes had glutamate dehydrogenase activities that were more thermolabile than that of an isogenic control strain. Eight other mutants had less than 10% of the wild-type glutamate dehydrog...

  4. Catalytic activity of bovine glutamate dehydrogenase requires a hexamer structure.

    OpenAIRE

    Bell, E T; Bell, J E

    1984-01-01

    Previous workers have shown that the hexamers of glutamate dehydrogenase are dissociated first into trimers and subsequently into monomers by increasing guanidinium chloride concentrations. In renaturation experiments it is shown that trimers of glutamate dehydrogenase can be reassociated to give the hexamer form of the enzyme, with full regain of activity. Monomeric subunits produced at high guanidinium chloride concentrations cannot be renatured. The trimer form of the enzyme is shown to ha...

  5. Pyruvate dehydrogenase complex and lactate dehydrogenase as targets for therapy of acute liver failure.

    Science.gov (United States)

    Ferriero, Rosa; Nusco, Edoardo; De Cegli, Rossella; Carissimo, Annamaria; Manco, Giuseppe; Brunetti-Pierri, Nicola

    2018-03-23

    Acute liver failure is a rapidly progressive deterioration of hepatic function resulting in high mortality and morbidity. Metabolic enzymes can translocate in the nucleus to regulate histone acetylation and gene expression. Levels and activities of pyruvate dehydrogenase complex (PDHC) and lactate dehydrogenase (LDH) were evaluated in nuclear fractions of livers of mice exposed to various hepatotoxins including CD95-Ab, α-amanitin, and acetaminophen. Whole-genome gene expression profiling by RNA-seq was performed in livers of mice with acute liver failure and analyzed by Gene Ontology Enrichment Analysis. Efficacy of histone acetyltransferase inhibitor garcinol and LDH inhibitor galloflavin at reducing liver damage was evaluated in mice with induced hepatotoxicity. Levels and activities of PDHC and LDH were increased in cytoplasmatic and nuclear fractions of livers of mice with acute liver failure. The increase of nuclear PDHC and LDH was associated with increased concentrations of acetyl-coA and lactate in nuclear fractions, and histone H3 hyper-acetylation. Gene expression in livers of mice with acute liver failure suggested that increased histone H3 acetylation induces the expression of genes related to response to damage. Reduced histone acetylation by the histone acetyltransferase inhibitor garcinol decreased liver damage and improved survival in mice with acute liver failure. Knock-down of PDHC or LDH improved viability in cells exposed to a pro-apoptotic stimulus. Treatment with the LDH inhibitor galloflavin that was also found to inhibit PDHC, reduced hepatic necrosis, apoptosis, and expression of pro-inflammatory cytokines in mice with acute liver failure. Mice treated with galloflavin also showed a dose-response increase in survival. PDHC and LDH translocate to the nucleus and are targets for therapy of acute liver failure. Acute liver failure is a rapidly progressive and life-threatening deterioration of liver function resulting in high mortality and

  6. The structure of the quinoprotein alcohol dehydrogenase of Acetobacter aceti modelled on that of methanol dehydrogenase from Methylobacterium extorquens.

    Science.gov (United States)

    Cozier, G E; Giles, I G; Anthony, C

    1995-06-01

    The 1.94 A structure of methanol dehydrogenase has been used to provide a model structure for part of a membrane quinohaemoprotein alcohol dehydrogenase. The basic superbarrel structure and the active-site region are retained, indicating essentially similar mechanisms of action, but there are considerable differences in the external loops, particularly those involved in formation of the shallow funnel leading to the active site.

  7. CCQM-K90, formaldehyde in nitrogen, 2 μmol mol-1 Final report

    Science.gov (United States)

    Viallon, Joële; Flores, Edgar; Idrees, Faraz; Moussay, Philippe; Wielgosz, Robert Ian; Kim, D.; Kim, Y. D.; Lee, S.; Persijn, S.; Konopelko, L. A.; Kustikov, Y. A.; Malginov, A. V.; Chubchenko, I. K.; Klimov, A. Y.; Efremova, O. V.; Zhou, Z.; Possolo, A.; Shimosaka, T.; Brewer, P.; Macé, T.; Ferracci, Valerio; Brown, Richard J. C.; Aoki, Nobuyuki

    2017-01-01

    The CCQM-K90 comparison is designed to evaluate the level of comparability of national metrology institutes (NMI) or designated institutes (DI) measurement capabilities for formaldehyde in nitrogen at a nominal mole fraction of 2 μmol mol-1. The comparison was organised by the BIPM using a suite of gas mixtures prepared by a producer of specialty calibration gases. The BIPM assigned the formaldehyde mole fraction in the mixtures by comparison with primary mixtures generated dynamically by permeation coupled with continuous weighing in a magnetic suspension balance. The BIPM developed two dynamic sources of formaldehyde in nitrogen that provide two independent values of the formaldehyde mole fraction: the first one based on diffusion of trioxane followed by thermal conversion to formaldehyde, the second one based on permeation of formaldehyde from paraformaldehyde contained in a permeation tube. Two independent analytical methods, based on cavity ring down spectroscopy (CRDS) and Fourier transform infrared spectroscopy (FTIR) were used for the assignment procedure. Each participating institute was provided with one transfer standard and value assigned the formaldehyde mole fraction in the standard based on its own measurement capabilities. The stability of the formaldehyde mole fraction in transfer standards was deduced from repeated measurements performed at the BIPM before and after measurements performed at participating institutes. In addition, 5 control standards were kept at the BIPM for regular measurements during the course of the comparison. Temporal trends that approximately describe the linear decrease of the amount-of-substance fraction of formaldehyde in nitrogen in the transfer standards over time were estimated by two different mathematical treatments, the outcomes of which were proposed to participants. The two treatments also differed in the way measurement uncertainties arising from measurements performed at the BIPM were propagated to the

  8. ald of Mycobacterium tuberculosis Encodes both the Alanine Dehydrogenase and the Putative Glycine Dehydrogenase

    Science.gov (United States)

    Giffin, Michelle M.; Modesti, Lucia; Raab, Ronald W.; Wayne, Lawrence G.

    2012-01-01

    The putative glycine dehydrogenase of Mycobacterium tuberculosis catalyzes the reductive amination of glyoxylate to glycine but not the reverse reaction. The enzyme was purified and identified as the previously characterized alanine dehydrogenase. The Ald enzyme was expressed in Escherichia coli and had both pyruvate and glyoxylate aminating activities. The gene, ald, was inactivated in M. tuberculosis, which resulted in the loss of all activities. Both enzyme activities were found associated with the cell and were not detected in the extracellular filtrate. By using an anti-Ald antibody, the protein was localized to the cell membrane, with a smaller fraction in the cytosol. None was detected in the extracellular medium. The ald knockout strain grew without alanine or glycine and was able to utilize glycine but not alanine as a nitrogen source. Transcription of ald was induced when alanine was the sole nitrogen source, and higher levels of Ald enzyme were measured. Ald is proposed to have several functions, including ammonium incorporation and alanine breakdown. PMID:22210765

  9. Effect of fermented sea tangle on the alcohol dehydrogenase and acetaldehyde dehydrogenase in Saccharomyces cerevisiae.

    Science.gov (United States)

    Cha, Jae-Young; Jeong, Jae-Jun; Yang, Hyun-Ju; Lee, Bae-Jin; Cho, Young-Su

    2011-08-01

    Sea tangle, a kind of brown seaweed, was fermented with Lactobacillus brevis BJ-20. The gamma-aminobutyric acid (GABA) content in fermented sea tangle (FST) was 5.56% (w/w) and GABA in total free amino acid of FST was 49.5%. The effect of FST on the enzyme activities and mRNA protein expression of alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) involved in alcohol metabolism in Saccharomyces cerevisiae was investigated. Yeast was cultured in YPD medium supplemented with different concentrations of FST powder [0, 0.4, 0.8, and 1.0% (w/v)] for 18 h. FST had no cytotoxic effect on the yeast growth. The highest activities and protein expressions of ADH and ALDH from the cell-free extracts of S. cerevisiae were evident with the 0.4% and 0.8% (w/v) FST-supplemented concentrations, respectively. The highest concentrations of GABA as well as minerals (Zn, Ca, and Mg) were found in the cell-free extracts of S. cerevisiae cultured in medium supplemented with 0.4% (w/v) FST. The levels of GABA, Zn, Ca, and Mg in S. cerevisiae were strongly correlated with the enzyme activities of ADH and ALDH in yeast. These results indicate that FST can enhance the enzyme activities and protein expression of ADH and ALDH in S. cerevisiae.

  10. 40 CFR Appendix A to Subpart Hhhh... - Method for Determining Free-Formaldehyde in Urea-Formaldehyde Resins by Sodium Sulfite (Iced...

    Science.gov (United States)

    2010-07-01

    ... (class A). 3.2.5One 10-mL pipette (class A). 3.2.6One 50-mL graduated cylinder (class A). 3.2.7A pH meter... mL of 1 M sodium sulfite into a stirred 250-mL beaker. 3.5.1.2Using a standardized pH meter, measure... of Formaldehyde Standard Solution. The pH should rise sharply to about 12. 3.5.1.4Using the pH meter...

  11. Determination of partition and diffusion coefficient of formaldehyde in selected building materials and impact of relative humidity

    Science.gov (United States)

    The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50% and 70% RH). A dynamic dual-chamber test meth...

  12. Determination of partition and diffusion coefficients of formaldehyde in selected building materials and impact of relative humidity (journal)

    Science.gov (United States)

    The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50% and 70% RH). A dynamic dual-chamber test meth...

  13. The health- and addictive effectes due to exposure to aldehydes of cigarette smoke. Part 1; Acetaldehyde, Formaldehyde, Acrolein and Propionaldehyde

    NARCIS (Netherlands)

    van Andel I; Schenk E; Rambali B; Wolterink G; van de Werken G; Stevenson H; van Aerts LAGJM; Vleeming W; LEO; LGM; LOC; CRV

    2003-01-01

    In deze literatuurstudie worden de gezondheids- en mogelijke verslavende effecten van blootstelling aan aldehyden ten gevolge van het roken van sigaretten beschreven. Dit literatuuronderzoek richt zich met name op acetaldehyde, formaldehyde, acrolein, en propionaldehyde. Alle aldehyden veroorzaken

  14. Adsorption behavior of formaldehyde on ZnO (10 1 bar 0) surface: A first principles study

    Science.gov (United States)

    Jin, Wentao; Chen, Guangde; Duan, Xiangyang; Yin, Yuan; Ye, Honggang; Wang, Dan; Yu, Jinying; Mei, Xuesong; Wu, Yelong

    2017-11-01

    In a first principles study of the formaldehyde adsorption on ZnO surface, we found a novel chain adsorption structure on ZnO (10 1 bar 0) plane. This adsorption structure results from the electrostatic interactions between those adsorbed formaldehyde molecules and the unique arrangement of Zn-O surface dimers on (10 1 bar 0) plane. This adsorption mechanism has the potential to extend to other wurtzite materials' (10 1 bar 0) plane and other similar cases. As the physical adsorption configurations are unstable, the chemical adsorption has to happen. The electronic properties show that the Cdbnd O double bond in CH2O turns into Csbnd O single bond and the highest occupied molecule orbital (HOMO) of formaldehyde is lifted into ZnO band gap becoming the hole trapping center. These results may be meaningful for formaldehyde degradation and detection.

  15. Selectivity of cesium from fission radionuclides using resorcinol-formaldehyde and zirconyl-molybdopyrophosphate as ion-exchangers.

    Science.gov (United States)

    Shady, S A

    2009-08-15

    Two ion-exchangers, the first is organic in nature and the other is inorganic named as resorcinol-formaldehyde (R-F) and zirconyl-molybdopyrophosphate (ZMPP) were synthesized and applied to decontaminate some fission radionuclides from radioactive waste streams. The distribution coefficients of the studied radionuclides for the two ion-exchanges at varying pH conditions are evaluated and the data showed that the selectivity sequence of resorcinol-formaldehyde for the studied cations is Cs(+)>Co(2+)>Eu(3+)>Zn(2+) which is the same sequence of zirconyl-molybdopyrophosphate while as the X-ray diffraction characterization showed that resorcinol-formaldehyde resin is an amorphous material but zirconyl-molybdopyrophosphate is a semicrystalline one and both of resorcinol-formaldehyde and zirconyl-molybdopyrophosphate are considered as promising materials specially for the decontamination of cesium from radioactive waste solutions.

  16. OMI/Aura Formaldehyde (HCHO) Total Column Global 0.25deg Lat/Lon Grid V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The Version-3 Aura-OMI Formaldehyde Product OMHCHOG is now available (http://disc.gsfc.nasa.gov/Aura/OMI/omhchog_v003.shtml) from the NASA Goddard Earth Sciences...

  17. OMI/Aura Formaldehyde (HCHO) Total Column 1-orbit L2 Swath 13x24 km V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The Version-3 Formaldehyde Product OMHCHO from the Aura-OMI is now available (http://disc.gsfc.nasa.gov/Aura/OMI/omhcho_v003.shtml) from the NASA Goddard Earth...

  18. Kinetics of soil dehydrogenase in response to exogenous Cd toxicity

    Energy Technology Data Exchange (ETDEWEB)

    Tan, Xiangping [College of Natural Resources and Environment, Northwest A& F University, Yangling, 712100, Shaanxi (China); Key Laboratory of Vegetation Restoration and Management of Degraded Ecosystems, South China Botanical Garden, Chinese Academy of Sciences, CAS 723 Xingke Rd., Tianhe District, Guangzhou 510650 (China); Wang, Ziquan; Lu, Guannan [College of Natural Resources and Environment, Northwest A& F University, Yangling, 712100, Shaanxi (China); He, Wenxiang, E-mail: wenxianghe@nwafu.edu.cn [College of Natural Resources and Environment, Northwest A& F University, Yangling, 712100, Shaanxi (China); Key Laboratory of Plant Nutrition and Agro-environment in Northwest China, Ministry of Agriculture, Northwest A& F University, Yangling, 712100, Shaanxi (China); Wei, Gehong [College of Life Sciences, Northwest A& F University, Yangling, 712100, Shaanxi (China); Huang, Feng; Xu, Xinlan; Shen, Weijun [Key Laboratory of Vegetation Restoration and Management of Degraded Ecosystems, South China Botanical Garden, Chinese Academy of Sciences, CAS 723 Xingke Rd., Tianhe District, Guangzhou 510650 (China)

    2017-05-05

    Highlights: • pH explained 30–45% of the dehydrogenase activity (DHA), V{sub max}, and K{sub m} variations across soils. • Different inhibition mechanism of Cd to DHA varied soil types. • Soil properties and inhibition constant affect the toxicity of Cd. • Reaction constant (k) could indicate sensitively the toxicity of Cd to DHA. - Abstract: Soil dehydrogenase plays a role in the biological oxidation of soil organic matter and can be considered a good measure of the change of microbial oxidative activity under environmental pollutions. However, the kinetic characteristic of soil dehydrogenase under heavy metal stresses has not been investigated thoroughly. In this study, we characterized the kinetic characteristic of soil dehydrogenase in 14 soil types, and investigated how kinetic parameters changed under spiked with different concentrations of cadmium (Cd). The results showed that the K{sub m} and V{sub max} values of soil dehydrogenase was among 1.4–7.3 mM and 15.9–235.2 μM h{sup −1} in uncontaminated soils, respectively. In latosolic red soil and brown soil, the inhibitory kinetic mechanism of Cd to soil dehydrogenase was anticompetitive inhibition with inhibition constants (K{sub i}) of 12 and 4.7 mM, respectively; in other soils belonged to linear mixed inhibition, the values of K{sub i} were between 0.7–4.2 mM. Soil total organic carbon and K{sub i} were the major factors affecting the toxicity of Cd to dehydrogenase activity. In addition, the velocity constant (k) was more sensitive to Cd contamination compared to V{sub max} and K{sub m}, which was established as an early indicator of gross changes in soil microbial oxidative activity caused by Cd contamination.

  19. Kinetics of soil dehydrogenase in response to exogenous Cd toxicity

    International Nuclear Information System (INIS)

    Tan, Xiangping; Wang, Ziquan; Lu, Guannan; He, Wenxiang; Wei, Gehong; Huang, Feng; Xu, Xinlan; Shen, Weijun

    2017-01-01

    Highlights: • pH explained 30–45% of the dehydrogenase activity (DHA), V max , and K m variations across soils. • Different inhibition mechanism of Cd to DHA varied soil types. • Soil properties and inhibition constant affect the toxicity of Cd. • Reaction constant (k) could indicate sensitively the toxicity of Cd to DHA. - Abstract: Soil dehydrogenase plays a role in the biological oxidation of soil organic matter and can be considered a good measure of the change of microbial oxidative activity under environmental pollutions. However, the kinetic characteristic of soil dehydrogenase under heavy metal stresses has not been investigated thoroughly. In this study, we characterized the kinetic characteristic of soil dehydrogenase in 14 soil types, and investigated how kinetic parameters changed under spiked with different concentrations of cadmium (Cd). The results showed that the K m and V max values of soil dehydrogenase was among 1.4–7.3 mM and 15.9–235.2 μM h −1 in uncontaminated soils, respectively. In latosolic red soil and brown soil, the inhibitory kinetic mechanism of Cd to soil dehydrogenase was anticompetitive inhibition with inhibition constants (K i ) of 12 and 4.7 mM, respectively; in other soils belonged to linear mixed inhibition, the values of K i were between 0.7–4.2 mM. Soil total organic carbon and K i were the major factors affecting the toxicity of Cd to dehydrogenase activity. In addition, the velocity constant (k) was more sensitive to Cd contamination compared to V max and K m , which was established as an early indicator of gross changes in soil microbial oxidative activity caused by Cd contamination.

  20. Using lysine adducts of human serum albumin to investigate the disposition of exogenous formaldehyde in human blood.

    Science.gov (United States)

    Regazzoni, Luca G; Grigoryan, Hasmik; Ji, Zhiying; Chen, Xi; Daniels, Sarah I; Huang, Deyin; Sanchez, Sylvia; Tang, Naijun; Sillé, Fenna C M; Iavarone, Anthony T; Williams, Evan R; Zhang, Luoping; Rappaport, Stephen M

    2017-02-15

    Formaldehyde is a human carcinogen that readily binds to nucleophiles, including proteins and DNA. To investigate whether exogenous formaldehyde produces adducts in extracellular fluids, we characterized modifications to human serum albumin (HSA) following incubation of whole blood, plasma, and saliva with formaldehyde at concentrations of 1, 10 and 100μM. The only HSA locus that showed the presence of formaldehyde modifications was Lys199. A N(6)-Lys adduct with added mass of 12Da, representing a putative intramolecular crosslink, was detected in biological fluids that had been incubated with formaldehyde but not in control fluids. An adduct representing N(6)-Lys formylation was detected in all fluids, but levels did not increase above control values over the tested range of formaldehyde concentrations. An adduct representing N(6)-Lys199 acetylation was also measured in all samples. We then applied the assay to repeated samples of human plasma from 6 nonsmoking volunteer subjects (from Berkeley, CA), and single samples of serum from 15 workers exposed to airborne formaldehyde at about 1.5ppm in a production facility and 15 control workers from Tianjin, China. Although all human plasma/serum samples contained basal levels of the products of N(6)-Lys formylation and acetylation, the putative crosslink product was not detected. Since the putative crosslink was observed in plasma incubated with formaldehyde at 1μM, this suggests that the endogenous concentration of formaldehyde in serum was much lower than reported in the literature. Furthermore, concentrations of the formyl adduct were not higher in workers exposed to formaldehyde at about 1.5ppm than in controls. Follow-up in vitro experiments with gaseous formaldehyde at 1.4ppm detected the putative crosslink in plasma but not whole blood. This combination of results suggests that N(6) formylation occurs within cells with subsequent release of adducted HSA to the systemic circulation. Comparing across human

  1. Alternative to latent catalysts for curing UF resins used in the production of low formaldehyde emission wood-based panels

    OpenAIRE

    Nuno Costa; Joao Pereira; Jorge Manuel Santos Silva Martins; João Ferra; Paulo Cruz; Fernao Magalhaes; Adelio Mendes; Luísa Carvalho

    2012-01-01

    This paper studies alternative catalysts to ammonium sulfate for curing urea-formaldehyde (UF) resins. When using a latent catalyst like ammonium sulfate, hexamine is formed as by-product of curing reaction. It is believed that hexamine hydrolysis may contribute to formaldehyde release during the life-time of wood-based panels produced with UF resins. Orthophosphoric acid, on the other hand, catalyzes resin cure without by-product formation and was compared to ammonium sulfate. The pot-life o...

  2. Hydroxymethylation beyond Carbonylation: Enantioselective Iridium-Catalyzed Reductive Coupling of Formaldehyde with Allylic Acetates via Enantiotopic π-Facial Discrimination.

    Science.gov (United States)

    Garza, Victoria J; Krische, Michael J

    2016-03-23

    Chiral iridium complexes modified by SEGPHOS catalyze the 2-propanol-mediated reductive coupling of branched allylic acetates 1a-1o with formaldehyde to form primary homoallylic alcohols 2a-2o with excellent control of regio- and enantioselectivity. These processes, which rely on enantiotopic π-facial discrimination of σ-allyliridium intermediates, represent the first examples of enantioselective formaldehyde C-C coupling beyond aldol addition.

  3. Formaldehyde and acetaldehyde exposure mitigation in US residences: In-home measurements of ventilation control and source control

    Energy Technology Data Exchange (ETDEWEB)

    Hult, Erin L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Willem, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Phillip N. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hotchi, Toshifumi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Russell, Marion L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-10-01

    Measurements were taken in new US residences to assess the extent to which ventilation and source control can mitigate formaldehyde exposure. Increasing ventilation consistently lowered indoor formaldehyde concentrations. However, at a reference air exchange rate of 0.35 h-1, increasing ventilation was up to 60% less effective than would be predicted if the emission rate were constant. This is consistent with formaldehyde emission rates decreasing as air concentrations increase, as observed in chamber studies. In contrast, measurements suggest acetaldehyde emission was independent of ventilation rate. To evaluate the effectiveness of source control, formaldehyde concentrations were measured in Leadership in Energy and Environmental Design (LEED) certified/Indoor airPLUS homes constructed with materials certified to have low emission rates of volatile organic compounds (VOC). At a reference air exchange rate of 0.35 h-1, and adjusting for home age, temperature and relative humidity, formaldehyde concentrations in homes built with low-VOC materials were 42% lower on average than in reference new homes with conventional building materials. Without adjustment, concentrations were 27% lower in the low-VOC homes. The mean and standard deviation of formaldehyde concentration were 33 μg m-3 and 22 μg m-3 for low-VOC homes and 45 μg m-3 and 30 μg m-3 for conventional.

  4. Formaldehyde Adsorption into Clinoptilolite Zeolite Modified with the Addition of Rich Materials and Desorption Performance Using Microwave Heating

    Directory of Open Access Journals (Sweden)

    Amin Kalantarifard

    2016-01-01

    Full Text Available Granite, bentonite, and starch were mixed with clinoptilolite zeolite to produce a modified zeolite. The modified zeolite was tested for its ability to absorb formaldehyde from air. The modified sample formaldehyde adsorption capacity was then compared with those of commercially available clinoptilolite, faujasite (Y, mordenite, and zeolite type A. Studies were focused on the relationships between the physical characteristics of the selected zeolites (crystal structure, surface porosity, pore volume, pore size and their formaldehyde adsorption capacity. The removal of starch at high temperature (1100°C and addition of bentonite during modified clinoptilolite zeolite (M-CLZ preparation generated large pores and a higher pore distribution on the sample surface, which resulted in higher adsorption capacity. The formaldehyde adsorption capacities of M-CLZ, clinoptilolite, faujasite (Y, zeolite type A, and mordenite were determined to be 300.5, 194.5, 123.7, 106.7, and 70 mg per gram of zeolite, respectively. The M-CLZ, clinoptilolite, and faujasite (Y crystals contained both mesoporous and microporous structures, which resulted in greater adsorption, while the zeolite type A crystal showed a layered structure and lower surface porosity, which was less advantageous for formaldehyde adsorption. Furthermore, zeolite regeneration using microwave heating was investigated focusing on formaldehyde removal by desorption from the zeolite samples. XRD, XRF, N2 adsorption/desorption, and FE-SEM experiments were performed to characterize the surface structure and textural properties the zeolites selected in this study.

  5. Formaldehyde in Alcoholic Beverages: Large Chemical Survey Using Purpald Screening Followed by Chromotropic Acid Spectrophotometry with Multivariate Curve Resolution

    Directory of Open Access Journals (Sweden)

    Julien A. Jendral

    2011-01-01

    Full Text Available A strategy for analyzing formaldehyde in beer, wine, spirits, and unrecorded alcohol was developed, and 508 samples from worldwide origin were analyzed. In the first step, samples are qualitatively screened using a simple colorimetric test with the purpald reagent, which is extremely sensitive for formaldehyde (detection limit 0.1 mg/L. 210 samples (41% gave a positive purpald reaction. In the second step, formaldehyde in positive samples is confirmed by quantitative spectrophotometry of the chromotropic acid-formaldehyde derivative combined with Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS. Calculation of UV-VIS and 13C NMR spectra confirmed the monocationic dibenzoxanthylium structure as the product of the reaction and disproved the widely cited para,para-quinoidal structure. Method validation for the spectrophotometric procedure showed a detection limit of 0.09 mg/L and a precision of 4.2–8.2% CV. In total, 132 samples (26% contained formaldehyde with an average of 0.27 mg/L (range 0–14.4 mg/L. The highest incidence occurred in tequila (83%, Asian spirits (59%, grape marc (54%, and brandy (50%. Our survey showed that only 9 samples (1.8% had formaldehyde levels above the WHO IPCS tolerable concentration of 2.6 mg/L.

  6. Formaldehyde in alcoholic beverages: large chemical survey using purpald screening followed by chromotropic Acid spectrophotometry with multivariate curve resolution.

    Science.gov (United States)

    Jendral, Julien A; Monakhova, Yulia B; Lachenmeier, Dirk W

    2011-01-01

    A strategy for analyzing formaldehyde in beer, wine, spirits, and unrecorded alcohol was developed, and 508 samples from worldwide origin were analyzed. In the first step, samples are qualitatively screened using a simple colorimetric test with the purpald reagent, which is extremely sensitive for formaldehyde (detection limit 0.1 mg/L). 210 samples (41%) gave a positive purpald reaction. In the second step, formaldehyde in positive samples is confirmed by quantitative spectrophotometry of the chromotropic acid-formaldehyde derivative combined with Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS). Calculation of UV-VIS and (13)C NMR spectra confirmed the monocationic dibenzoxanthylium structure as the product of the reaction and disproved the widely cited para,para-quinoidal structure. Method validation for the spectrophotometric procedure showed a detection limit of 0.09 mg/L and a precision of 4.2-8.2% CV. In total, 132 samples (26%) contained formaldehyde with an average of 0.27 mg/L (range 0-14.4 mg/L). The highest incidence occurred in tequila (83%), Asian spirits (59%), grape marc (54%), and brandy (50%). Our survey showed that only 9 samples (1.8%) had formaldehyde levels above the WHO IPCS tolerable concentration of 2.6 mg/L.

  7. Formaldehyde and acetaldehyde exposure mitigation in US residences: in-home measurements of ventilation control and source control.

    Science.gov (United States)

    Hult, E L; Willem, H; Price, P N; Hotchi, T; Russell, M L; Singer, B C

    2015-10-01

    Measurements were taken in new US residences to assess the extent to which ventilation and source control can mitigate formaldehyde exposure. Increasing ventilation consistently lowered indoor formaldehyde concentrations. However, at a reference air exchange rate of 0.35 h(-1), increasing ventilation was up to 60% less effective than would be predicted if the emission rate were constant. This is consistent with formaldehyde emission rates decreasing as air concentrations increase, as observed in chamber studies. In contrast, measurements suggest acetaldehyde emission was independent of ventilation rate. To evaluate the effectiveness of source control, formaldehyde concentrations were measured in Leadership in Energy and Environmental Design (LEED)-certified/Indoor airPLUS homes constructed with materials certified to have low emission rates of volatile organic compounds (VOC). At a reference air exchange rate of 0.35 h(-1), and adjusting for home age, temperature and relative humidity, formaldehyde concentrations in homes built with low-VOC materials were 42% lower on average than in reference new homes with conventional building materials. Without adjustment, concentrations were 27% lower in the low-VOC homes. The mean and standard deviation of formaldehyde concentration was 33 μg/m(3) and 22 μg/m(3) for low-VOC homes and 45 μg/m(3) and 30 μg/m(3) for conventional. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  8. Prebiotic Amino Acid Thioester Synthesis: Thiol-Dependent Amino Acid Synthesis from Formose substrates (Formaldehyde and Glycolaldehyde) and Ammonia

    Science.gov (United States)

    Weber, Arthur L.

    1998-01-01

    Formaldehyde and glycolaldehyde (substrates of the formose autocatalytic cycle) were shown to react with ammonia yielding alanine and homoserine under mild aqueous conditions in the presence of thiol catalysts. Since similar reactions carried out without ammonia yielded alpha-hydroxy acid thioesters, the thiol-dependent synthesis of alanine and homoserine is presumed to occur via amino acid thioesters-intermediates capable of forming peptides. A pH 5.2 solution of 20 mM formaldehyde, 20 mM glycolaldehyde, 20 mM ammonium chloride, 23 mM 3-mercaptopropionic acid, and 23 mM acetic acid that reacted for 35 days at 40 C yielded (based on initial formaldehyde) 1.8% alanine and 0.08% homoserine. In the absence of thiol catalyst, the synthesis of alanine and homoserine was negligible. Alanine synthesis required both formaldehyde and glycolaldehyde, but homoserine synthesis required only glycolaldehyde. At 25 days the efficiency of alanine synthesis calculated from the ratio of alanine synthesized to formaldehyde reacted was 2.1%, and the yield (based on initial formaldehyde) of triose and tetrose intermediates involved in alanine and homoserine synthesis was 0.3 and 2.1%, respectively. Alanine synthesis was also seen in similar reactions containing only 10 mM each of aldehyde substrates, ammonia, and thiol. The prebiotic significance of these reactions that use the formose reaction to generate sugar intermediates that are converted to reactive amino acid thioesters is discussed.

  9. Designing of cardanol based polyol and its curing kinetics with melamine formaldehyde resin.

    Science.gov (United States)

    Balgude, Dinesh Bapurao; Sabnis, Anagha Shyamsunder; Ghosh, Swapan Kumar

    2017-01-01

    Commercially used industrial baking enamels consist of alkyd or polyester resin with melamine formaldehyde. These resins are mainly derived from fossil resources. Considering growing environmental legislation regarding use of petroleum based raw materials, utilization of renewable resources to synthesize various chemistries can be the only obvious option as far as academia and industries are concerns. The present work deals with exploration of one of the natural resources (Cardanol) for polyol synthesis, its characterization (FTIR and NMR) and its curing behavior with melamine formaldehyde resin by differential scanning calorimetry (DSC). The optimized formulations from DSC study were further evaluated for general coating properties to study the suitability of developed polyol for industrial coating application. The experimental studies revealed that melamine content in the curing mixtures and thereby developed crosslinking density played an important role in deciding the coatings properties.

  10. Fabrication and optimisation of optical biosensor using alcohol oxidase enzyme to evaluate detection of formaldehyde

    Science.gov (United States)

    Rachim, A.; Sari, A. P.; Nurlely, Fauzia, V.

    2017-07-01

    In this study, a new and simple biosensor base on alcohol oxidase (AOX)-enzyme for detecting formaldehyde in aqueous solutions has been successfully fabricated. The alcohol oxidase (AOX) enzyme was immobilized on poly-n-butyl acrylic-co-N-acryloxysuccinimide (nBA-NAS) membrane containing chromoionophore. The chemical reaction between AOX and formaldehyde generates a colour change of chromoionophore detected by optical absorbance measured in UV Vis. This paper focuses on the concentration optimization of buffer phosphate solution, response time, the quantity of enzyme and the measurement of the detection range of biosensors. The result shows that the optimum concentration and pH of buffer phosphate solution is 0.05 M and pH 7, respectively. The optimum response time is 3 min, the optimum unit of enzyme for biosensor is 1 unit/sample and the detection range of biosensor is 0.264 mM with R2 = 0.9421.

  11. The effect of α-cellulose fiber on the properties of melamine-formaldehyde molding compounds

    International Nuclear Information System (INIS)

    Khatibi, M. A.; Beheshti, M. A.; Morshedian, J.

    2001-01-01

    Melamine-formaldehyde molding compounds have found different industrial applications. This is due to their good mechanical properties such as hardness, gloss and high modulus and strength. One of the major components of these compounds is α-cellulose fiber and has a major effect on the mechanical properties. Although this fiber is being used in these compounds for a long time, there is not much data available of α-cellulose fibers on the physical and mechanical properties of melamine-formaldehyde molding compounds being investigated. Results show that although the microstructures of these two fibers are quite different from each other, but they do not have any effect on the mechanical properties of the molding. Whereas, it has a significant effect on the wettability (processing condition) and glossiness of the mol dings. Since this latter property is very important in house wares applications, the darker mol dings can not be used in domestic applications

  12. High-yield electrochemical production of formaldehyde from CO2 and seawater.

    Science.gov (United States)

    Nakata, Kazuya; Ozaki, Takuya; Terashima, Chiaki; Fujishima, Akira; Einaga, Yasuaki

    2014-01-13

    The catalytic, electrocatalytic, or photocatalytic conversion of CO2 into useful chemicals in high yield for industrial applications has so far proven difficult. Herein, we present our work on the electrochemical reduction of CO2 in seawater using a boron-doped diamond (BDD) electrode under ambient conditions to produce formaldehyde. This method overcomes the usual limitation of the low yield of higher-order products, and also reduces the generation of H2 . In comparison with other electrode materials, BDD electrodes have a wide potential window and high electrochemical stability, and, moreover, exhibit very high Faradaic efficiency (74%) for the production of formaldehyde, using either methanol, aqueous NaCl, or seawater as the electrolyte. The high Faradaic efficiency is attributed to the sp(3)-bonded carbon of the BDD. Our results have wide ranging implications for the efficient and cost-effective conversion of CO2. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Formaldehyde gas sensor based on nanostructured nickel oxide and the microstructure effects on its response

    Science.gov (United States)

    Lahem, D.; Lontio, F. R.; Delcorte, A.; Bilteryst, L.; Debliquy, M.

    2016-03-01

    NiO nanostructures can be used as a promising material for semiconductor gas sensor to detect formaldehyde at low concentrations (nanostructures on gas sensing properties is studied and discussed. NiO nanostructures have been synthesized by thermal decomposition of precursors obtained by two different chemical precipitation methods and a sol-gel technique. Thick films of the synthesized NiO nanostructures were deposited by spray coating on alumina substrates fitted with gold interdigitated electrodes and a platinum heater. The gas sensing properties of those NiO films were studied for low concentrations of formaldehyde gas at different working temperatures. A clear difference in response characteristics was observed between the samples prepared by different synthesis routes.

  14. EXPERIMENTAL INVESTIGATION ON CHROMIUM(VI REMOVAL FROM AQUEOUS SOLUTION USING ACTIVATED CARBON RESORCINOL FORMALDEHYDE XEROGELS

    Directory of Open Access Journals (Sweden)

    Eghe A. Oyedoh

    2016-10-01

    Full Text Available The adsorption of chromium(VI metal ion in aqueous solutions by activated carbon resorcinol formaldehyde xerogels (ACRF was investigated. The results showed that pore structure, surface area and the adsorbent surface chemistry are important factors in the control of the adsorption of chromium(VI metal ions. The isotherm parameters were obtained from plots of the isotherms and from the application of Langmuir and Freundlich Isotherms. Based on regression analysis, the Langmuir isotherm model was the best fit. The maximum adsorption capacity of ACRF for chromium (VI was 241.9 mg/g. The pseudo-second-order kinetic model was the best fit to the experimental data for the adsorption of chromium metal ions by activated carbon resorcinol formaldehyde xerogels. The thermodynamics of Cr(VI ions adsorption onto ACRF was a spontaneous and endothermic process.

  15. Adsorption of Carbon Dioxide, Ammonia, Formaldehyde, and Water Vapor on Regenerable Carbon Sorbents

    Science.gov (United States)

    Wojtowicz, Marek A.; Cosgrove, Joseph E.; Serio, Michael A.; Wilburn, Monique

    2015-01-01

    Results are presented on the development of reversible sorbents for the combined carbon dioxide, moisture, and trace-contaminant (TC) removal for use in Extravehicular Activities (EVAs), and more specifically in the Primary Life Support System (PLSS). The currently available life support systems use separate units for carbon dioxide, trace contaminants, and moisture control, and the long-term objective is to replace the above three modules with a single one. Furthermore, the current TC-control technology involves the use of a packed bed of acid-impregnated granular charcoal, which is nonregenerable, and the carbon-based sorbent under development in this project can be regenerated by exposure to vacuum at room temperature. In this study, several carbon sorbents were fabricated and tested for simultaneous carbon dioxide, ammonia, formaldehyde, and water sorption. Multiple adsorption/vacuum-regeneration cycles were demonstrated at room temperature, and also the enhancement of formaldehyde sorption by the presence of ammonia in the gas mixture.

  16. Dehydrogenase activity of forest soils depends on the assay used

    Science.gov (United States)

    Januszek, Kazimierz; Długa, Joanna; Socha, Jarosław

    2015-01-01

    Dehydrogenases are exclusively intracellular enzymes, which play an important role in the initial stages of oxidation of soil organic matter. One of the most frequently used methods to estimate dehydrogenase activity in soil is based on the use of triphenyltetrazolium chloride as an artificial electron acceptor. The purpose of this study was to compare the activity of dehydrogenases of forest soils with varied physicochemical properties using different triphenyltetrazolium chloride assays. The determination was carried out using the original procedure by Casida et al., a modification of the procedure which involves the use of Ca(OH)2 instead of CaCO3, the Thalmann method, and the assay by Casida et al. without addition of buffer or any salt. Soil dehydrogenase activity depended on the assay used. Dehydrogenase determined by the Casida et al. method without addition of buffer or any salt correlated with the pH values of soils. The autoclaved strongly acidic samples of control soils showed high concentrations of triphenylformazan, probably due to chemical reduction of triphenyltetrazolium chloride. There is, therefore, a need for a sterilization method other than autoclaving, ie a process that results in significant changes in soil properties, thus helping to increase the chemical reduction of triphenyltetrazolium chloride.

  17. Reaction of formaldehyde and nitric acid in a remotely operated thermosiphon evaporator

    International Nuclear Information System (INIS)

    Hall, R.; Patton, B.D.; Haas, P.A.

    1986-01-01

    A safe, controlled method for reacting formaldehyde with excess nitric acid, while simultaneously concentrating a fissile uranium nitrate solution, was developed and is being used successfully at Oak Ridge National Laboratory in a remotely operated thermosiphon evaporator. The operation was adapted from laboratory studies to semicontinuously process multikilogram batches. Thus far, experience with this system includes the successful processing of more than 260 batches (2.7 kg per batch) of solution

  18. Continuous chemiluminescence determination of formaldehyde in air based on Trautz-Schorigin reaction

    Czech Academy of Sciences Publication Activity Database

    Motyka, Kamil; Mikuška, Pavel; Večeřa, Zbyněk

    2006-01-01

    Roč. 562, č. 2 (2006), s. 236-244 ISSN 0003-2670 R&D Projects: GA AV ČR IAA4031105; GA ČR GA526/03/1182; GA ČR GA525/04/0011 Institutional research plan: CEZ:AV0Z40310501 Keywords : formaldehyde * air * chemiluminescence Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 2.894, year: 2006

  19. EFFECT OF ACTIVATED CHARCOAL ADDITION ON FORMALDEHYDE EMISSION OF MEDIUM DENSITY FIBERBOARD

    Directory of Open Access Journals (Sweden)

    Saptadi Darmawan

    2010-12-01

    Full Text Available The manufacturing of medium density fiberboard (MDF using dry forming process for interior purpose requires extensive amount of thermo-setting urea formaldehyde (UF adhesive. Unfortunately, this adhesive brings about formaldehyde emission from the resulting MDF, which was potentially harmful to human beings. The use of activated charcoal can be effective to reduce such emission. As the relevance, this research aimed to investigate the effect of activated charcoal addition to the MDF pulp on formaldehyde emission from the MDF. The fibers for the MDF-mat forming were the pulp procured from the MDF factory, resulting from the thermo-mechanical pulping (TMP conducted on the mixed mangium wood (Acacia mangium and rubber wood (Hevea brasiliensis in 3:1 (w/w proportion, respectively.  Such mixed TMP pulping was also done in the factor y.  The bonding between TMP pulp fiber during mat forming was assisted by the use of UF adhesive.  Prior to the MDF mat forming , was added to the resulting TMP pulp-fibers activated charcoal in  various amount, 2%, 4% and 6% based on fiber mass as well as based on UF adhesive mass. The activated charcoal was prepared by carbonizing candle nut shell into charcoal followed by activation process using phosphate solution.  Meanwhile the forming of MDF mat employed air-dr y process. As the control, MDF forming with UF adhesive was performed without addition of activated charcoal. It turned out that the activated charcoal-added MDF exhibited effective reduction in formaldehyde emission and significant improvement in physical and mechanical properties, i.e. lower thickness swelling , and greater MOR , MOE and internal bond, compared to the control MDF. The use of activated charcoal at 4% based on the adhesive mass seemed to be the optimum amount.  Physical and mechanical properties of the activated charcoal added MDF could mostly meet the JIS specification.

  20. Fixing of various simulated radioactive wastes in urea-formaldehyde resin

    International Nuclear Information System (INIS)

    Du Dahai; Wei Peng

    1986-01-01

    This paper outlines the results of the fixing of a variety of simulated radioactive wastes in the urea-formaldehyde resin. The radioactive waste materials fixed include spent ion exchange resin, concentrates of NaNO 3 -NaBO 2 as well as NaBO 2 and sludge. The performance of the fixed products has been improved by means of selecting the synthetic conditions of resin, a suitable hardener and an inorganic additive

  1. Confirmation of soybean plastid rRNAs by formaldehyde denaturing agarose gel electrophoresis.

    Science.gov (United States)

    Zhu, Y Q; Zheng, Y; Chen, H B; Huang, L Q

    2014-10-27

    Owing to their prokaryotic origin, plastid rRNAs are mainly 23s/16s/5s rRNAs. We present a novel plant RNA isolation method in this paper. Also, not only the eukaryotic 28s (26s, 25s)/18s rRNAs but the prokaryotic 26s/23s rRNAs as well were demonstrated in a single sample for the first time by formaldehyde denaturing agarose gel electrophoresis.

  2. Indoor Levels of Formaldehyde and Other Pollutants and Relationship to Air Exchange Rates and Human Activities

    Science.gov (United States)

    Huangfu, Y.; O'Keeffe, P.; Kirk, M.; Walden, V. P.; Lamb, B. K.; Jobson, B. T.

    2017-12-01

    This paper reports results on an indoor air quality study conducted on six homes in summer and winter, contrasting indoor and outdoor concentrations of O3, CO, CO2, NOx, PM2.5, and selected volatile organic hydrocarbons measured by PTR-MS. Data were collected as 1 minute averages. Air exchange rates of the homes were determined by CO2 tracer release. Smart home sensors, recording human activity level in various places in the home, and window and doors openings, were utilized to better understand the link between human activity and indoor air pollution. From our study, averaged air exchange rates of the homes ranged from 0.2 to 1.2 hour-1 and were greatly affected by the ventilation system type and window and door openings. In general, a negative correlation between air exchange rate and indoor VOCs levels was observed, with large variation of pollutant levels between the homes. For most of the VOCs measured in the house, including formaldehyde and acetaldehyde, summer levels were much higher than winter levels. In some homes formaldehyde levels displayed a time of day variation that was linked to changes in indoor temperature. During a wildfire period in the summer of 2015, outdoor levels of PM2.5, formaldehyde, and benzene dramatically increased, significantly impacting indoor levels due to infiltration. Human activities, such as cooking, can significantly change the levels of most of the compounds measured in the house and the levels can be significantly elevated for short periods of time, with peak levels can be several orders higher compared with typical levels. The data suggest that an outcome of state energy codes that require new homes to be energy efficient, and as a consequence built with lower air exchange rates, will be unacceptable levels of air toxics, notably formaldehyde.

  3. ROAT: morphology of ROAT on arm, neck and face in formaldehyde and diazolidinyl urea sensitive individuals

    DEFF Research Database (Denmark)

    Zachariae, Claus; Hall, Barbara; Cupferman, Sylvie

    2006-01-01

    The morphology of early allergic contact dermatitis reactions was studied in formaldehyde allergic individuals exposed to a cream product preserved with 4 different concentrations of diazolidinyl urea. The study was made using a dose-escalating design in 3 different anatomical regions, the upper ...... arm, neck and face. On the arm and neck, the dominant initial morphology was an eczematous papular eruption. In the face, the initial skin changes were more homogeneous and infiltrated erythema....

  4. Preparation and Analytical Properties of 4-Hydroxybenzaldehyde, Biuret and Formaldehyde Terpolymer Resin

    OpenAIRE

    Bunian A. Shareef; Ibrahim F. Waheed; Kariem K. Jalaot

    2014-01-01

    The chelating resin was synthesized by polycondensation reaction of 4-hydroxy benzaldehyde, formaldehyde and biuret under alkaline condition. The prepared resin was characterized by IR spectroscopy and 1HNMR spectroscopy. The resin sample was cured isothermally at 1200C.The DSC scans was measured for the prepared resin. The analytical evaluation of the prepared resin toward the studied ions (Hg2+, Ni2+ and Pb2+) using the batch method. It was employed to study selectivity of metal ion...

  5. Airborne In-Situ Measurements of Formaldehyde over California: First Results from the COFFEE Instrument

    Science.gov (United States)

    Marrero, Josette; St. Clair, Jason; Yates, Emma; Swanson, Andrew; Gore, Warren; Iraci, Laura; Hanisco, Thomas

    2016-04-01

    Formaldehyde (HCHO) is one of the most abundant oxygenated volatile organic compounds (VOCs) in the atmosphere, playing a role multiple atmospheric processes. Measurements of HCHO can be used to help quantify convective transport, the abundance of VOCs, and ozone production in urban environments. The Compact Formaldehyde FluorescencE Experiment (COFFEE) instrument uses Non-Resonant Laser Induced Fluorescence (NR-LIF) to detect trace concentrations of HCHO as part of the Alpha Jet Atmospheric eXperiment (AJAX) payload. Developed at NASA GSFC, COFFEE is a small, low maintenance instrument with a sensitivity of 100 pptv and a quick response time (1 sec). The COFFEE instrument has been customized to fit in an external wing pod on the Alpha Jet aircraft based at NASA ARC. The instrument can operate over a broad range of altitudes, from boundary layer to lower stratosphere, making it well suited for the Alpha Jet, which can access altitudes from the surface up to 40,000 ft. We will present results from flights performed over the Central Valley of California, including boundary layer measurements and vertical profiles in the tropospheric column. This region is of particular interest, due to its elevated levels of HCHO, revealed in satellite images, as well as its high ozone concentrations. In addition to HCHO, the AJAX payload includes measurements of atmospheric ozone, methane, and carbon dioxide. These results will be presented in conjunction with formaldehyde. Targets in the Central Valley consist of an oil field, agricultural areas, and highways, each of which can emit HCHO primarily and generate HCHO through secondary production. Formaldehyde is one of the few urban pollutants that can be measured from space. Plans to compare in-situ COFFEE data with satellite-based HCHO observations such as those from OMI (Aura) and OMPS (SuomiNPP) will also be presented.

  6. Lawps ion exchange column gravity drain of spherical resorcinol formaldehyde resin

    Energy Technology Data Exchange (ETDEWEB)

    Duignan, M. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Herman, D. T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Restivo, M. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Burket, P. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-01-28

    Experiments at several different scales were performed to understand the removal of spherical resorcinol formaldehyde (sRF) ion exchange resin using a gravity drain system with a valve located above the resin screen in the ion exchange column (IXC). This is being considered as part of the design for the Low Activity Waste Pretreatment System (LAWPS) to be constructed at the DOE Hanford Site.

  7. The use of HPLC for the detection and quantification of formaldehyde in the pteridophyta.

    Science.gov (United States)

    Adrian-Romero, M; Blunden, G; Carpenter, B G; Lucas, S; Tyihák, E

    1998-01-01

    Formaldehyde, as its dimedone adduct, formaldemethone, has been detected and quantified in all species of Pteridophyta examined. The procedure involved the use of an Hypersil C-18 column, methanol-water (60 : 40 v/v) as the mobile phase and an UV detector set at 258 nm. Quantification was based on peak height. Yields varied from 30 microg/g fresh weight for Polystichum setiferum to 5370 microg/g fresh weight for Selaginella viticulosa.

  8. CO2-based hydrogen storage: CO2 hydrogenation to formic acid, formaldehyde and methanol

    Science.gov (United States)

    Schaub, Thomas

    2018-02-01

    The storage of hydrogen via hydrogenation of CO2 to small organic molecules can be attractive for mobile applications. In this article, the state of the art regarding hydrogen storage in Methanol, Formic Acid as well as Formaldehyde and derivates based on CO2 hydrogenation is summarized. The reverse reaction, the release of hydrogen from these molecules is also crucial and described in the articles together with possible concepts for the use of hydrogen storage by CO2 hydrogenation.

  9. Removal of formaldehyde from gas streams via packed-bed dielectric barrier discharge plasmas

    International Nuclear Information System (INIS)

    Ding Huixian; Zhu Aimin; Yang Xuefeng; Li Cuihong; Xu Yong

    2005-01-01

    Formaldehyde is a major indoor air pollutant and can cause serious health disorders in residents. This work reports the removal of formaldehyde from gas streams via alumina-pellet-filled dielectric barrier discharge plasmas at atmospheric pressure and 70 deg. C. With a feed gas mixture of 140 ppm HCHO, 21.0% O 2 , 1.0% H 2 O in N 2 , ∼92% of formaldehyde can be effectively destructed at GHSV (gas flow volume per hour per discharge volume) of 16 500 h -1 and E in = 108 J l -1 . An increase in the specific surface area of the alumina pellets enhances the HCHO removal, and this indicates that the adsorbed HCHO species may have a lower C-H bond breakage energy. Based on an examination of the influence of gas composition on the removal efficiency, the primary destruction pathways, besides the reactions initiated by discharge-generated radicals, such as O, H, OH and HO 2 , may include the consecutive dissociations of HCHO molecules and HCO radicals through their collisions with vibrationally- and electronically-excited metastable N 2 species. The increase of O 2 content in the inlet gas stream is able to diminish the CO production and to promote the formation of CO 2 via O-atom or HO 2 -radical involved reactions

  10. Flux analysis uncovers key role of functional redundancy in formaldehyde metabolism.

    Directory of Open Access Journals (Sweden)

    Christopher J Marx

    2005-02-01

    Full Text Available Genome-scale analysis of predicted metabolic pathways has revealed the common occurrence of apparent redundancy for specific functional units, or metabolic modules. In many cases, mutation analysis does not resolve function, and instead, direct experimental analysis of metabolic flux under changing conditions is necessary. In order to use genome sequences to build models of cellular function, it is important to define function for such apparently redundant systems. Here we describe direct flux measurements to determine the role of redundancy in three modules involved in formaldehyde assimilation and dissimilation in a bacterium growing on methanol. A combination of deuterium and (14C labeling was used to measure the flux through each of the branches of metabolism for growth on methanol during transitions into and out of methylotrophy. The cells were found to differentially partition formaldehyde among the three modules depending on the flux of methanol into the cell. A dynamic mathematical model demonstrated that the kinetic constants of the enzymes involved are sufficient to account for this phenomenon. We demonstrate the role of redundancy in formaldehyde metabolism and have uncovered a new paradigm for coping with toxic, high-flux metabolic intermediates: a dynamic, interconnected metabolic loop.

  11. Concomitant contact allergies to formaldehyde, methylchloroisothiazolinone/methylisothiazolinone, methylisothiazolinone, and fragrance mixes I and II.

    Science.gov (United States)

    Pontén, Ann; Bruze, Magnus; Engfeldt, Malin; Hauksson, Inese; Isaksson, Marléne

    2016-11-01

    Contact allergies to the preservatives formaldehyde and methylchloroisothiazolinone (MCI)/methylisothiazolinone (MI) have been reported to appear together at a statistically significant level. Recently, revisions concerning the patch test preparations of MCI/MI, MI and formaldehyde have been recommended for the European baseline series. To investigate (i) the number of concomitant contact allergies to the preservatives, (ii) the number of concomitant contact allergies to the preservatives and the fragrance mixes (FM I and FM II) and (iii) gender differences. Patients tested with the Swedish baseline series during the period 2012-2014 at the Department of Occupational and Environmental Dermatology in Malmö, Sweden were investigated. 2165 patients were patch tested with the baseline series (34% males and 66% females). Contact allergies to formaldehyde and MCI/MI and/or MI were significantly associated (p fragrance allergy. Males and females do not differ significantly concerning contact allergy to fragrances. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content

    Energy Technology Data Exchange (ETDEWEB)

    Li Wei [Tianjin Municipal Key Lab of Fiber Modification and Functional Fibers, Institute of Functional Fibers, Tianjin Polytechnic University, Tianjin 300160 (China); Zhang Xingxiang [Tianjin Municipal Key Lab of Fiber Modification and Functional Fibers, Institute of Functional Fibers, Tianjin Polytechnic University, Tianjin 300160 (China)], E-mail: zhangpolyu@yahoo.com.cn; Wang Xuechen; Niu Jianjin [Tianjin Municipal Key Lab of Fiber Modification and Functional Fibers, Institute of Functional Fibers, Tianjin Polytechnic University, Tianjin 300160 (China)

    2007-12-15

    Microencapsulated phase change materials (MicroPCMs) were synthesized by in situ polymerization using melamine-formaldehyde (MF) resin as shell and n-octadecane as core. The employed MF prepolymer was prepared by incorporating formaldehyde once and melamine for three times. The effects of dropping rate of MF prepolymer on the surface morphology, dispersibility and thermal stability of the microcapsules were systematically investigated using scanning electronic microscopy (SEM), wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC) and thermogravimetry analysis (TG). The results show that, with the dropping rate of the MF prepolymer decreasing, the flocculation phenomenon of microcapsules decreases and the globular surface becomes smoother; and the thermal stability increases regularly. The average diameter of the microcapsules is about 2.2 {mu}m and the diameter distribution is narrow. The enthalpy of the microcapsules containing 59 wt% n-octadecane is 144 J g{sup -1}. In addition, the remnant formaldehyde content of the microcapsules is 68.6 mg kg{sup -1}, which is highly attractive for the application of MicroPCMs.

  13. Degradation of humic acid and formation of formaldehyde in PEROXONE processes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.W.; Rhee, D.S. [Kangwon National University, Chunchon (Korea)

    2001-02-01

    This research was studied the action of the coupling ozone-hydrogen peroxide on aqueous humic acid. PEROXONE process is enhanced the generation of hydroxyl radicals which is effective for degradation of organic matters. Therefore the changes of UV{sub 254} and TOC were investigated through the change of concentrations, injection time of H{sub 2}O{sub 2}, initial pH of aqueous humic acid and concentrations of radical scavenger as HCO{sub 3}{sup -} in the PEROXONE processes. And the GC/ECD was used to detect the formaldehyde formed by ozonation of humic acid. From the experimental results, concentrations and injection time of H{sub 2}O{sub 2} and initial pH in solution in the PEROXONE processes were very important for enhancing the efficiency of degradation in humic acid. The results indicated that removal efficiency of TOC was the highest when concentration of H{sub 2}O{sub 2} was 5 mg/L, injection time of H{sub 2}O{sub 2} was 5 minutes and initial pH in solution was 10.5. And presence of alkalinity in solution was reduced the efficiency of treatment. The formaldehyde were formed less PEROXONE processes than only ozone. When initial pH in solution were changed from 3.5 to 10.5, the formaldehyde were formed the highest concentration at pH 5. (author). 18 refs., 12 figs.

  14. Degradation of gaseous formaldehyde via visible light photocatalysis using multi-element doped titania nanoparticles.

    Science.gov (United States)

    Laciste, Maricris T; de Luna, Mark Daniel G; Tolosa, Nolan C; Lu, Ming-Chun

    2017-09-01

    This study developed a modified titanium dioxide photocatalyst doped with multi-element synthesized via sol-gel process to productize a novel photocatalyst. The study includes degradation of gaseous formaldehyde under visible light using the synthesized novel titanium dioxide photocatalyst. Varying molar ratios from 0 to 2 percent (% mole in titanium dioxide) of ammonium fluoride, silver nitrate and sodium tungstate as dopant precursors for nitrogen, fluorine, silver and tungsten were used. Photodegradation of gaseous formaldehyde was examined on glass tubular reactors illuminated with blue light emitting diodes (LEDs) using immobilized photocatalyst. The photocatalytic yield is analyzed based on the photocatalyst surface chemical properties via X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR) Spectrophotometry, Brunauer-Emmett-Teller (BET) and X-ray Diffraction (XRD) characterization results. The applied modifications enhanced the visible light capability of the catalyst in comparison to the undoped catalyst and commercially available Degussa P-25, such that it photocatalytically degrades 88.1% of formaldehyde in 120 min. Synthesized titanium dioxide photocatalyst exhibits a unique spin orbital at 532.07 eV and 533.27 eV that came from the hybridization of unoccupied Ti d(t 2g ) levels. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Application of toxicogenomic profiling to evaluate effects of benzene and formaldehyde: from yeast to human

    Science.gov (United States)

    McHale, Cliona M.; Smith, Martyn T.; Zhang, Luoping

    2014-01-01

    Genetic variation underlies a significant proportion of the individual variation in human susceptibility to toxicants. The primary current approaches to identify gene–environment (GxE) associations, genome-wide association studies (GWAS) and candidate gene association studies, require large exposed and control populations and an understanding of toxicity genes and pathways, respectively. This limits their application in the study of GxE associations for the leukemogens benzene and formaldehyde, whose toxicity has long been a focus of our research. As an alternative approach, we applied innovative in vitro functional genomics testing systems, including unbiased functional screening assays in yeast and a near-haploid human bone marrow cell line (KBM7). Through comparative genomic and computational analyses of the resulting data, we have identified human genes and pathways that may modulate susceptibility to benzene and formaldehyde. We have validated the roles of several genes in mammalian cell models. In populations occupationally exposed to low levels of benzene, we applied peripheral blood mononuclear cell transcriptomics and chromosome-wide aneuploidy studies (CWAS) in lymphocytes. In this review of the literature, we describe our comprehensive toxicogenomic approach and the potential mechanisms of toxicity and susceptibility genes identified for benzene and formaldehyde, as well as related studies conducted by other researchers. PMID:24571325

  16. Tunable, functional carbon spheres derived from rapid synthesis of resorcinol-formaldehyde resins.

    Science.gov (United States)

    Pol, Vilas G; Shrestha, Lok Kumar; Ariga, Katsuhiko

    2014-07-09

    In this article, the rapid synthesis of colloidal, spherical polymer resins via enhanced copolymerization and polycondensation of resorcinol with formaldehyde is presented. The ultrasound-mediated technique assembles perfectly spherical resins in less than 5 min due to generated active species and free radicals produced in an aqueous ammonia-ethanol-water solvent. In this report, numerous controlled experiments account for and support the important role of high intensity ultrasounds in the rapid cluster formation, condensation, and gelation process of resorcinol with formaldehyde in the presence of ammonia catalyst. After a controlled heat treatment process, amorphous carbon spheres are obtained from these spherical polymer resins. The effect of temperature (up to 1100 °C) on the structural evolution of these carbon spheres is meticulously studied which is lacking in the previous literature. The resorcinol-formaldehyde resins carbonized at 600 and 900 °C demonstrate BET surface areas of 592.4 m(2)/g and 952.5 m(2)/g with specific capacitances of 17.5, and 33.5 F/g (scan rate of 5 mV/s), respectively.

  17. Preliminary survey report: control technology for formaldehyde emissions at Hoosier Panel, New Albany, Indiana

    Energy Technology Data Exchange (ETDEWEB)

    Mortimer, V.D.

    1982-12-01

    An onsite visit was made to the Hoosier Panel Company, New Albany, Indiana to observe processes and controls in the veneering of wood panels. Most of the bonding of the veneer to the core was accomplished through use of a urea/formaldehyde resin and a hot press method. Some work was done using a cold-press process in which the glue was heated with radio-frequency radiation. Banding of the core with solid-wood edges prior to veneering also used an adhesive that may contain formaldehyde. At least five different recipes were used for panel glue, all of which involve the Perkins L-100 urea/formaldehyde resin. A canopy hood was installed over each press. There were six wall fans in the plate cooling rooms. Airflow across the glue room was also aided by auxiliary fans. Routine air sampling was not performed. A safety committee inspected the site monthly. The local exhaust ventilation hoods had an insufficient flow rate to capture vapors beyond the boundary of the canopy openings. The facility offered a unique approach to caul plate cooling which also provided a large quantity of the general ventilation airflow. The author recommends that the auxiliary fans might be better positioned to contribute more effectively to controlling exposures.

  18. Study on the colorimetric properties of 2,4,6-triarylpyridine derivative compound for imaging Formaldehyde

    Science.gov (United States)

    Ovianto, D.; Ma’ruf, F. A. R.; Fadilah, N. N.; Sugiharta, I. B. A. R.; Purwono, B.

    2017-11-01

    The derivative compound of 2,4,6-triarylpyridine was synthesized in two steps. The target compound was tested as colorimetric chemosensor against formaldehyde and the limit of detection was also determined using spectrophotometer UV-vis. The first step of the synthesis was the formation of 4-phenyl-2,6-bis(4-nitrophenyl)pyridine compound (1) from 4-nitroacetophenon and benzaldehyde. The second step of the synthesis was the formation of 4-phenyl-2,6-bis-(4-aminophenyl)pyridine (2) from reduction of the nitro group in compound 1 by HCl 37% solution and Sn metal. Compound 1 and 2 were characterized by spectrometers FTIR, 1H NMR and direct inlet-mass spectrometry. The results showed that compound 1 was synthesized with a yield of 78.3% and compound 2 with a yield of 68.9%. Compound 2 as chemosensor showed color transition from colorless to yellow in chemosensor test against formaldehyde in ethanol solvent. The limit of detection of formaldehyde was measured as 4.7×10-3 M using spectrophotometer UV-vis.

  19. Preconcentration of Cu (II) from seawater using a novel and stable phenol-formaldehyde resin.

    Science.gov (United States)

    Manivannan, D; Starvin, Maria; Biju, V M

    2010-01-01

    Preconcentration of Cu (II) from seawater using a novel phenol-formaldehyde (P-F) resin was investigated. 1,2-dihydroxybenzene-4-azo-3-hydroxybenzene-formaldehyde resin (DAHBF) was prepared by condensing 1,2-dihydroxybenzene-4-azo-3-hydroxybenzene with formaldehyde (1:2 mole ratio) in the presence of oxalic acid as catalyst. Polychelates were obtained when the DAHBF was treated with the aqueous solution of Cu (II) ions. The polymeric resin and polymer-metal complexes were characterized with thermal analysis and spectral studies. The IR spectra of polychelates suggest that the metal was coordinated through the oxygen atoms of the dihydroxybenzene moiety. The TGA data revealed the thermal stability of the resin and the polychelates. X-ray diffraction study revealed the incorporation of the metal ion significantly enhanced the degree of crystallinity. The sorption properties of the chelate forming resin towards divalent metal ion [Cu(II)] was studied as a function of pH, preconcentration time, metal concentration, amount of resin, aqueous phase volume and presence of electrolyte. This procedure was validated for recovery of copper from seawater samples. The method has adequate accuracy and it can be used for determination of copper in sea water samples.

  20. Effects of dust, formaldehyde and delayed feeding on early postnatal development of broiler chickens.

    Science.gov (United States)

    de Gouw, Pieter; van de Ven, Lotte J F; Lourens, Sander; Kemp, Bas; van den Brand, Henry

    2017-06-01

    We investigated effects of perinatal exposure to dust or formaldehyde and the moment of first feed intake after hatching on broiler chicken development during the first week of life. Four environmental treatments were used from 468 until 512h of incubation: control (CONT), heat treated dust (HTD), untreated dust (UTD) or formaldehyde disinfection (FORM). After hatching, all chickens were assigned to 1 of 2 feeding treatments: early feeding (EF; feed and water available in the hatcher) or delayed feeding (DF). After 512h of incubation (day 0), chickens were reared until day 7 of age. In DF chickens, body weight (BW), yolk free body mass (YFBM) and relative liver weight did not differ among environmental treatments at day 0. However, in EF chickens BW at day 0 was greater in HTD chickens than in UTD and FORM chickens. YFBM in EF chickens at day 0 was greater when chickens were exposed to HTD compared to the other environmental treatments. In EF chickens, relative liver weight was greater in HTD chickens than in FORM. In DF chickens, BW at day 0 was positively related with hatching time (HT). In EF chickens, YFBM was positively related to HT. Residual yolk weight at day 0 was positively related with HT, whereas relative liver weight and microbicidal capacity were negatively related with HT. This study demonstrated that formaldehyde and dust during the hatching phase affect broiler chicken development at pulling from the incubator, but not at day 7. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Aminotransferase and glutamate dehydrogenase activities in lactobacilli and streptococci

    Directory of Open Access Journals (Sweden)

    Guillermo Hugo Peralta

    Full Text Available ABSTRACT Aminotransferases and glutamate dehydrogenase are two main types of enzymes involved in the initial steps of amino acid catabolism, which plays a key role in the cheese flavor development. In the present work, glutamate dehydrogenase and aminotransferase activities were screened in twenty one strains of lactic acid bacteria of dairy interest, either cheese-isolated or commercial starters, including fifteen mesophilic lactobacilli, four thermophilic lactobacilli, and two streptococci. The strains of Streptococcus thermophilus showed the highest glutamate dehydrogenase activity, which was significantly elevated compared with the lactobacilli. Aspartate aminotransferase prevailed in most strains tested, while the levels and specificity of other aminotransferases were highly strain- and species-dependent. The knowledge of enzymatic profiles of these starter and cheese-isolated cultures is helpful in proposing appropriate combinations of strains for improved or increased cheese flavor.

  2. [Informatics analysis of malate dehydrogenase from Taenia saginata asiatica].

    Science.gov (United States)

    Huang, Jiang; Hu, Xu-Chu; Huang, Yan; Yu, Xin-Bing; Bao, Huai-En; Lang, Shu-Yuan; Liao, Xing-Jiang

    2008-06-30

    Tools from bioinformatics websites such as NCBI, ExPaSy were used for the analysis. The malate dehydrogenase full-length gene from Taenia saginata asiatica was 1 212 bp in length, with a coding region of 30-1 028 bp and coding 332 amino acids. It was a complete and full-length gene compared with the homologues in GenBank. The protein showed no transmembrane region, with stable physical-chemical characteristics. Three major linear epitopes located aa95-aa100, aa322-aa327 and aa117-aa122, with certain distance from each other on the surface of spatial structure of malate dehydrogenase (MDH). The last one was the linear epitope of Taenia. This cytosolic malate dehydrogenase gene is a potential antigen for diagnosis.

  3. Crystal structure of homoisocitrate dehydrogenase from Schizosaccharomyces pombe

    Energy Technology Data Exchange (ETDEWEB)

    Bulfer, Stacie L.; Hendershot, Jenna M.; Trievel, Raymond C. (Michigan); (UCSF)

    2013-09-18

    Lysine biosynthesis in fungi, euglena, and certain archaebacteria occurs through the {alpha}-aminoadipate pathway. Enzymes in the first steps of this pathway have been proposed as potential targets for the development of antifungal therapies, as they are absent in animals but are conserved in several pathogenic fungi species, including Candida, Cryptococcus, and Aspergillus. One potential antifungal target in the {alpha}-aminoadipate pathway is the third enzyme in the pathway, homoisocitrate dehydrogenase (HICDH), which catalyzes the divalent metal-dependent conversion of homoisocitrate to 2-oxoadipate (2-OA) using nicotinamide adenine dinucleotide (NAD{sup +}) as a cofactor. HICDH belogns to a family of {beta}-hydroxyacid oxidative decarboxylases that includes malate dehydrogenase, tartrate dehydrogenase, 6-phosphogluconate dehydrogenase, isocitrate dehydrogenase (ICDH), and 3-isopropylmalte dehydrogenase (IPMDH). ICDH and IPMDH are well-characterized enzymes that catalyze the decarboxylation of isocitrate to yield 2-oxoglutarate (2-OG) in the citric acid cycle and the conversion of 3-isopropylmalate to 2-oxoisovalerate in the leucine biosynthetic pathway, respectively. Recent structural and biochemical studies of HICDH reveal that this enzyme shares sequence, structural, and mechanistic homology with ICDH and IPMDH. To date, the only published structures of HICDH are from the archaebacteria Thermus thermophilus (TtHICDH). Fungal HICDHs diverge from TtHICDH in several aspects, including their thermal stability, oligomerization state, and substrate specificity, thus warranting further characterization. To gain insights into these differences, they determined crystal structures of a fungal Schizosaccharomyces pombe HICDH (SpHICDH) as an apoenzyme and as a binary complex with additive tripeptide glycyl-glycyl-glycine (GGG) to 1.55 {angstrom} and 1.85 {angstrom} resolution, respectively. Finally, a comparison of the SpHICDH and TtHICDH structures reveal differences in

  4. Screening of Glucose-6-Phosphate Dehydrogenase Deficiency in Cord Blood

    Directory of Open Access Journals (Sweden)

    Can Acipayam

    2014-02-01

    Aim: Glucose-6-phosphate dehydrogenase deficiency is an important factor in etiology of pathologic neonatal jaundice. The aim of this study was to indicate the significance of screening glucose-6-phosphate dehydrogenase deficiency in the cord blood of neonates and the frequency of this deficiency in the etiology of neonatal hyperbilirubinemia. Material and Method: The study was performed consecutive 1015 neonates were included. Five hundred fifty six (54.8% of them were male and 459 (45.2% were female. The following parameters were recorded: Gender, birth weight, birth height, head circumference and gestational age. The glucose-6-phosphate dehydrogenase level of neonates were measured with quantitative method in cord blood. Also, hemoglobine, hematocrite, red blood cell count and blood group were measured. The following parameters were recorded in cases with jaundice: exchange transfusion, phototherapy, physiologic and pathologic jaundice, peak bilirubin day, maximum bilirubin level, total bilirubin level at the first day of jaundice, beginning time of jaundice. Results: Enzyme deficiency was detected in 133 (13.1% of neonates and 76 (57% of them were male, 57 (43% were female. Significant difference was detected in low glucose-6-phosphate dehydrogenase enzyme level with jaundice group for total bilirubin level at the first day of jaundice, maximum total bilirubin level and pathologic jaundice (p<0.05. Discussion: The ratio of glucose-6-phosphate dehydrogenase deficiency was found in Edirne in this study and this ratio was higher than other studies conducted in our country. For this reason, glucose-6-phosphate dehydrogenase enzyme level in cord blood of neonates should be measured routinely and high risk neonates should be followed up for hyperbilirubinemia and parents should be informed in our region.

  5. Field Derived Emission Factors For Formaldehyde and other Volatile Organic Compounds in FEMA Temporary Housing Units

    Energy Technology Data Exchange (ETDEWEB)

    Parthasarathy, Srinandini; Maddalena, Randy L.; Russell, Marion L.; Apte, Michael G.

    2010-10-01

    Sixteen previously occupied temporary housing units (THUs) were studied to assess emissions of volatile organic compounds. The whole trailer emission factors wereevaluated for 36 VOCs including formaldehyde. Indoor sampling was carried out in the THUs located in Purvis staging yard in Mississippi, USA. Indoor temperature andrelative humidity (RH) were also measured in all the trailers during sampling. Indoor temperatures were varied (increased or decreased) in a selection of THUs using theheating, ventilation and air conditioning (HVAC) systems. Indoor temperatures during sampling ranged from 14o C to 33o C, and relative humidity (RH) varied between 35percentand 74percent. Ventilation rates were increased in some trailers using bathroom fans and vents during some of the sampling events. Ventilation rates measured during some aselection of sampling events varied from 0.14 to 4.3 h-1. Steady state indoor formaldehyde concentrations ranged from 10 mu g-m-3 to 1000 mu g-m-3. The formaldehyde concentrations in the trailers were of toxicological significance. The effects of temperature, humidity and ventilation rates were also studied. A linearregression model was built using log of percentage relative humidity, inverse of temperature (in K-1), and inverse log ACH as continuous independent variables, trailermanufacturer as a categorical independent variable, and log of the chemical emission factors as the dependent variable. The coefficients of inverse temperature, log relativehumidity, log inverse ACH with log emission factor were found to be statistically significant for all the samples at the 95percent confidence level. The regression model wasfound to explain about 84percent of the variation in the dependent variable. Most VOC concentrations measured indoors in the Purvis THUs were mostly found to be belowvalues reported in earlier studies by Maddalena et al.,1,2 Hodgson et al.,3 and Hippelein4. Emissions of TMPB-DIB (a plasticizer found in vinyl products) were found

  6. Reversible inactivation of CO dehydrogenase with thiol compounds

    Energy Technology Data Exchange (ETDEWEB)

    Kreß, Oliver [Department of Microbiology, University of Bayreuth, 95440 Bayreuth (Germany); Gnida, Manuel [Department of Chemistry, University of Paderborn, 33098 Paderborn (Germany); Pelzmann, Astrid M. [Department of Microbiology, University of Bayreuth, 95440 Bayreuth (Germany); Marx, Christian [Institute of Biochemistry and Biophysics, Friedrich-Schiller-University of Jena, 07745 Jena (Germany); Meyer-Klaucke, Wolfram [Department of Chemistry, University of Paderborn, 33098 Paderborn (Germany); Meyer, Ortwin, E-mail: Ortwin.Meyer@uni-bayreuth.de [Department of Microbiology, University of Bayreuth, 95440 Bayreuth (Germany)

    2014-05-09

    Highlights: • Rather large thiols (e.g. coenzyme A) can reach the active site of CO dehydrogenase. • CO- and H{sub 2}-oxidizing activity of CO dehydrogenase is inhibited by thiols. • Inhibition by thiols was reversed by CO or upon lowering the thiol concentration. • Thiols coordinate the Cu ion in the [CuSMo(=O)OH] active site as a third ligand. - Abstract: Carbon monoxide dehydrogenase (CO dehydrogenase) from Oligotropha carboxidovorans is a structurally characterized member of the molybdenum hydroxylase enzyme family. It catalyzes the oxidation of CO (CO + H{sub 2}O → CO{sub 2} + 2e{sup −} + 2H{sup +}) which proceeds at a unique [CuSMo(=O)OH] metal cluster. Because of changing activities of CO dehydrogenase, particularly in subcellular fractions, we speculated whether the enzyme would be subject to regulation by thiols (RSH). Here we establish inhibition of CO dehydrogenase by thiols and report the corresponding K{sub i}-values (mM): L-cysteine (5.2), D-cysteine (9.7), N-acetyl-L-cysteine (8.2), D,L-homocysteine (25.8), L-cysteine–glycine (2.0), dithiothreitol (4.1), coenzyme A (8.3), and 2-mercaptoethanol (9.3). Inhibition of the enzyme was reversed by CO or upon lowering the thiol concentration. Electron paramagnetic resonance spectroscopy (EPR) and X-ray absorption spectroscopy (XAS) of thiol-inhibited CO dehydrogenase revealed a bimetallic site in which the RSH coordinates to the Cu-ion as a third ligand ([Mo{sup VI}(=O)OH{sub (2)}SCu{sup I}(SR)S-Cys]) leaving the redox state of the Cu(I) and the Mo(VI) unchanged. Collectively, our findings establish a regulation of CO dehydrogenase activity by thiols in vitro. They also corroborate the hypothesis that CO interacts with the Cu-ion first. The result that thiol compounds much larger than CO can freely travel through the substrate channel leading to the bimetallic cluster challenges previous concepts involving chaperone function and is of importance for an understanding how the sulfuration step in

  7. Formaldehyde as a carbon and electron shuttle between autotroph and heterotroph populations in acidic hydrothermal vents of Norris Geyser Basin, Yellowstone National Park

    Energy Technology Data Exchange (ETDEWEB)

    Moran, James J.; Whitmore, Laura M.; Isern, Nancy G.; Romine, Margaret F.; Riha, Krystin M.; Inskeep, William P.; Kreuzer, Helen W.

    2016-03-19

    The Norris Geyser Basin in Yellowstone National Park contains a large number of hydrothermal systems, which host microbial populations supported by primary productivity associated with a suite of chemolithotrophic metabolisms. We demonstrate that Metallosphaera yellowstonesis MK1, a facultative autotrophic archaeon isolated from a hyperthermal acidic hydrous ferric oxide (HFO) spring in Norris Geyser Basin, excretes formaldehyde during autotrophic growth. To determine the fate of formaldehyde in this low organic carbon environment, we incubated native microbial mat (containing M. yellowstonensis) from a HFO spring with 13C-formaldehyde. Isotopic analysis of incubation-derived CO2 and biomass showed that formaldehyde was both oxidized and assimilated by members of the community. Autotrophy, formaldehyde oxidation, and formaldehyde assimilation displayed different sensitivities to chemical inhibitors, suggesting that distinct sub-populations in the mat selectively perform these functions. Our results demonstrate that electrons originally resulting from iron oxidation can energetically fuel autotrophic carbon fixation and associated formaldehyde excretion, and that formaldehyde is both oxidized and assimilated by different organisms within the native microbial community. Thus, formaldehyde can effectively act as a carbon and electron shuttle connecting the autotrophic, iron oxidizing members with associated heterotrophic members in the HFO community.

  8. Assay of partially purified glutamate dehydrogenase isolated from ...

    African Journals Online (AJOL)

    Glutamate dehydrogenase (E C 1.4.1.1) isolated from the seeds of asparagus beans was partially purified to a factor of 22 by dialysis after fractional precipitation with solid ammonium sulphate at 40 and 60% saturation. A specific activity of 11.78μmol min-1 mg-1 protein was calculated for the partially purified enzyme when ...

  9. 21 CFR 862.1440 - Lactate dehydrogenase test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Lactate dehydrogenase test system. 862.1440 Section 862.1440 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test...

  10. 21 CFR 862.1420 - Isocitric dehydrogenase test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Isocitric dehydrogenase test system. 862.1420 Section 862.1420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test...

  11. New enzymatic assay, parasite lactate dehydrogenase in diagnosis ...

    African Journals Online (AJOL)

    Background: The unique ability of plasmodial lactate dehydrogenase p(LDH) to utilise 3-acetyl pyridine dinucleotide (APAD) in lieu of NAD as a coenzyme in the conversion of pyruvate to lactate, led to the development of a biochemical assay for the detection of plasmodial parasitaemia. Researchers have reported that ...

  12. Crystallization behaviour of glyceraldehyde dehydrogenase from Thermoplasma acidophilum

    Czech Academy of Sciences Publication Activity Database

    Lermark, L.; Degtjarik, Oksana; Steffler, F.; Sieber, V.; Kutá-Smatanová, Ivana

    2015-01-01

    Roč. 71, č. 12 (2015), s. 1475-1480 ISSN 2053-230X Institutional support: RVO:67179843 Keywords : TaAlDH * Thermoplasma acidophilum * bioproduction * cell-free enzyme cascade * glyceraldehyde dehydrogenase Subject RIV: CE - Biochemistry Impact factor: 0.647, year: 2015

  13. Novel thidiazuron-derived inhibitors of cytokinin oxidase/dehydrogenase

    Czech Academy of Sciences Publication Activity Database

    Nisler, Jaroslav; Kopečný, D.; Končitíková, R.; Zatloukal, Marek; Bazgier, Václav; Berka, K.; Zalabák, D.; Briozzo, P.; Strnad, Miroslav; Spíchal, Lukáš

    2016-01-01

    Roč. 92, 1-2 (2016), s. 235-248 ISSN 0167-4412 R&D Projects: GA MŠk(CZ) LO1204; GA ČR GA15-22322S Institutional support: RVO:61389030 Keywords : Cytokinin oxidase/dehydrogenase * Crystal structure * Molecular docking Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.356, year: 2016

  14. Cloning and expression of chicken 20-hydroxysteroid dehydrogenase

    Czech Academy of Sciences Publication Activity Database

    Bryndová, Jana; Klusoňová, Petra; Kučka, Marek; Vagnerová, Karla; Mikšík, Ivan; Pácha, Jiří

    2006-01-01

    Roč. 37, č. 3 (2006), s. 453-462 ISSN 0952-5041 R&D Projects: GA AV ČR(CZ) IAA6011201 Grant - others:GA UK(CZ) 216/2004 Institutional research plan: CEZ:AV0Z50110509 Keywords : 20-hydroxysteroid dehydrogenase * SDR family Subject RIV: CE - Biochemistry Impact factor: 2.988, year: 2006

  15. Glucose-6-phosphate dehydrogenase deficiency; the single most ...

    African Journals Online (AJOL)

    Introduction: Glucose- 6-phosphate dehydrogenase deficiency is the most common enzymatic disorder of the red cell and an important risk factor for neonatal jaundice. Methodology: The aim of the study was to determine the incidence of G-6-PD deficiency among jaundiced neonates, and describe the associated morbidity ...

  16. Studies on the structure and function of pyruvate dehydrogenase complexes

    NARCIS (Netherlands)

    Abreu, de R.

    1978-01-01

    The aim of the present investigation was to obtain more information of the structure and function of the pyruvate dehydrogenase complexes from Azotobacter vinelandii and Escherichia coli.

    In chapter 2 a survey is given of the recent literature on

  17. Prevalence of glucose-6-phosphate dehydrogenase deficiency in ...

    African Journals Online (AJOL)

    Pradeep Kumar

    2016-02-06

    Feb 6, 2016 ... Meta-analysis;. Prevalence. Abstract Background: Glucose-6-phosphate dehydrogenase (G6PD) is a house keeping enzyme which catalyzes the first step in the hexose monophosphate pathway of glucose metabolism. G6PD deficiency is the commonest hemolytic X-linked genetic disease, which affects ...

  18. Alcohol consumption, alcohol dehydrogenase 3 polymorphism, and colorectal adenomas

    NARCIS (Netherlands)

    Tiemersma, E.W.; Wark, P.A.; Ocké, M.C.; Bunschoten, A.; Otten, M.H.; Kok, F.J.; Kampman, E.

    2003-01-01

    Alcohol is a probable risk factor with regard to colorectal neoplasm and is metabolized to the carcinogen acetaldehyde by the genetically polymorphic alcohol dehydrogenase 3 (ADH3) enzyme. We evaluated whether the association between alcohol and colorectal adenomas is modified by ADH3 polymorphism.

  19. Perioperative care of an infant with pyruvate dehydrogenase ...

    African Journals Online (AJOL)

    The authors present the anaesthetic management of two infants with pyruvate dehydrogenase complex deficiency (PDCD), a rare genetic disorder of carbohydrate metabolism leading to lactic acidosis and neurological impairment. In the first case, a seven-month-old infant, undergoing closed reduction of a dislocated hip, ...

  20. Substrate Specificity via Ternary Complex Formation with Glutamate Dehydrogenase

    NARCIS (Netherlands)

    Koekoek, Henk; Robillard, George T.

    1977-01-01

    Very little discrimination is observed in the binary binding of dicarboxylic acid substrate analogues to glutamate dehydrogenase as monitored by proton nuclear magnetic resonance. Variation in length, charge, bulkiness and conformational rigidity resulted in only a factor of five variation in KD and