Effect of OROS methylphenidate on encopresis in children with attention-deficit/hyperactivity disorder.

Science.gov (United States)

Yılmaz, Savaş; Bilgiç, Ayhan; Hergüner, Sabri

2014-04-01

Although encopresis shows a high rate of comorbidity in patients with attention-deficit/hyperactivity disorder (ADHD), the etiologic origin of this relationship and the effect of ADHD drugs on encopresis are unclear. In this chart review, we explored the effect of OROS long-acting methylphenidate (MPH) treatment on encopresis in children with ADHD. We also evaluated the relationship between the clinical variables of ADHD and encopresis. The sample consisted of 21 children and adolescents (20 boys and 1 girl) with encopresis and coexisting ADHD 7-15 years of age. Their clinical characteristics and baseline (visit 1) and end of the second months' (visit 2) Conners' Parent Rating Scale (CPRS) subscores were recorded. Retrospective clinician determinations were made using the Clinical Global Impressions-Severity subscale (CGI-S) for encopresis severity and the Clinical Global Impressions-Improvement subscale (CGI-I) for encopresis response. According to the CGI-I, 14 subjects (71.4 %) showed much or very much improvement in their encopresis at the second visit. All of the CPRS scores showed a significant reduction during the second visit. No association was found between the CGI-I score and the changes in any of the CPRS scores. Baseline oppositional defiant disorder (ODD) and conduct disorder (CD) scores were correlated with the CGI-S score; however, no association was found between core ADHD symptom severity and the CGI-S score. With regard to the encopresis outcome, the baseline CD score was negatively correlated with the CGI-I score, and the baseline ODD score was prone to show a negative correlation with the CGI-I score. These results suggest that coexisting behavioral problems may be a vulnerability factor based on the severity of encopresis, and that MPH treatment may have a positive effect on encopresis in children and adolescents with ADHD.

Clinical relevance of findings in trials of CBT for depression

NARCIS (Netherlands)

Lepping, P.; Whittington, R.; Sambhi, R.S.; Lane, S.; Poole, R.; Leucht, S.; Cuijpers, P.; McCabe, R.; Waheed, W.

2017-01-01

Cognitive behavioural therapy (CBT) is beneficial in depression. Symptom scores can be translated into Clinical Global Impression (CGI) scale scores to indicate clinical relevance. We aimed to assess the clinical relevance of findings of randomised controlled trials (RCTs) of CBT in depression. We

Skeletal muscle PLIN proteins, ATGL and CGI-58, interactions at rest and following stimulated contraction

Science.gov (United States)

Ramos, Sofhia V.; Vandenboom, Rene; Roy, Brian D.; Peters, Sandra J.

2013-01-01

Evidence indicates that skeletal muscle lipid droplet-associated proteins (PLINs) regulate lipolysis through protein-protein interactions on the lipid droplet surface. In adipocytes, PLIN1 is thought to regulate lipolysis by directly interacting with comparative gene identification-58 (CGI-58), an activator of adipose triglyceride lipase (ATGL). Upon lipolytic stimulation, PLIN1 is phosphorylated, releasing CGI-58 to fully activate ATGL and initiate triglyceride breakdown. The absence of PLIN1 in skeletal muscle leads us to believe that other PLIN family members undertake this role. Our purpose was to examine interactions between PLIN2, PLIN3, and PLIN5, with ATGL and its coactivator CGI-58 at rest and following contraction. Isolated rat solei were incubated for 30 min at rest or during 30 min of intermittent tetanic stimulation [150-ms volleys at 60 Hz with a train rate of 20 tetani/min (25°C)] to maximally stimulate intramuscular lipid breakdown. Results show that the interaction between ATGL and CGI-58 increased 128% following contraction (P = 0.041). Further, ATGL interacts with PLIN2, PLIN3, and PLIN5 at rest and following contraction. The PLIN2-ATGL interaction decreased significantly by 21% following stimulation (P = 0.013). Both PLIN3 and PLIN5 coprecipitated with CGI-58 at rest and following contraction, while there was no detectable interaction between PLIN2 and CGI-58 in either condition. Therefore, our findings indicate that in skeletal muscle, during contraction-induced muscle lipolysis, ATGL and CGI-58 strongly associate and that the PLIN proteins work together to regulate lipolysis, in part, by preventing ATGL and CGI-58 interactions at rest. PMID:23408028

Skeletal muscle PLIN proteins, ATGL and CGI-58, interactions at rest and following stimulated contraction.

Science.gov (United States)

MacPherson, Rebecca E K; Ramos, Sofhia V; Vandenboom, Rene; Roy, Brian D; Peters, Sandra J

2013-04-15

Evidence indicates that skeletal muscle lipid droplet-associated proteins (PLINs) regulate lipolysis through protein-protein interactions on the lipid droplet surface. In adipocytes, PLIN1 is thought to regulate lipolysis by directly interacting with comparative gene identification-58 (CGI-58), an activator of adipose triglyceride lipase (ATGL). Upon lipolytic stimulation, PLIN1 is phosphorylated, releasing CGI-58 to fully activate ATGL and initiate triglyceride breakdown. The absence of PLIN1 in skeletal muscle leads us to believe that other PLIN family members undertake this role. Our purpose was to examine interactions between PLIN2, PLIN3, and PLIN5, with ATGL and its coactivator CGI-58 at rest and following contraction. Isolated rat solei were incubated for 30 min at rest or during 30 min of intermittent tetanic stimulation [150-ms volleys at 60 Hz with a train rate of 20 tetani/min (25°C)] to maximally stimulate intramuscular lipid breakdown. Results show that the interaction between ATGL and CGI-58 increased 128% following contraction (P = 0.041). Further, ATGL interacts with PLIN2, PLIN3, and PLIN5 at rest and following contraction. The PLIN2-ATGL interaction decreased significantly by 21% following stimulation (P = 0.013). Both PLIN3 and PLIN5 coprecipitated with CGI-58 at rest and following contraction, while there was no detectable interaction between PLIN2 and CGI-58 in either condition. Therefore, our findings indicate that in skeletal muscle, during contraction-induced muscle lipolysis, ATGL and CGI-58 strongly associate and that the PLIN proteins work together to regulate lipolysis, in part, by preventing ATGL and CGI-58 interactions at rest.

Association of the GRIN2B rs2284411 polymorphism with methylphenidate response in attention-deficit/hyperactivity disorder.

Science.gov (United States)

Kim, Johanna I; Kim, Jae-Won; Park, Jong-Eun; Park, Subin; Hong, Soon-Beom; Han, Doug Hyun; Cheong, Jae Hoon; Choi, Jae-Won; Lee, Sumin; Kim, Bung-Nyun

2017-08-01

We investigated the possible association between two NMDA subunit gene polymorphisms (GRIN2B rs2284411 and GRIN2A rs2229193) and treatment response to methylphenidate (MPH) in attention-deficit/hyperactivity disorder (ADHD). A total of 75 ADHD patients aged 6-17 years underwent 6 months of MPH administration. Treatment response was defined by changes in scores of the ADHD-IV Rating Scale (ADHD-RS), clinician-rated Clinical Global Impression-Improvement (CGI-I), and Continuous Performance Test (CPT). The association of the GRIN2B and GRIN2A polymorphisms with treatment response was analyzed using logistic regression analyses. The GRIN2B rs2284411 C/C genotype showed significantly better treatment response as assessed by ADHD-RS inattention ( p=0.009) and CGI-I scores ( p=0.009), and there was a nominally significant association in regard to ADHD-RS hyperactivity-impulsivity ( p=0.028) and total ( p=0.023) scores, after adjusting for age, sex, IQ, baseline Clinical Global Impression-Severity (CGI-S) score, baseline ADHD-RS total score, and final MPH dose. The GRIN2B C/C genotype also showed greater improvement at the CPT response time variability ( pADHD.

Risperidone in psychotic combat-related posttraumatic stress disorder: an open trial.

Science.gov (United States)

Kozarić-Kovacić, Dragica; Pivac, Nela; Mück-Seler, Dorotea; Rothbaum, Barbara Olasov

2005-07-01

Psychotic symptoms that frequently occur in combat-related posttraumatic stress disorder (PTSD) complicate its pharmacotherapy. We hypothesized that war veterans with psychotic PTSD, resistant to prior antidepressant treatment, would respond well to 6 weeks of treatment with the atypical antipsychotic risperidone, given as a monotherapy. Twenty-six male war veterans with psychotic PTSD (DSM-IV) completed the 6-week inpatient treatment with risperidone (2-4 mg/day) during the period from November 1999 through December 2002. The primary outcome measure was change from baseline to endpoint (6 weeks) in Positive and Negative Syndrome Scale (PANSS) total and subscale scores. Secondary outcome measures were changes in PTSD Interview (PTSD-I) and Clinical Global Impressions-Severity of Illness scale (CGI-S) total and subscale scores. Clinical improvement was assessed by CGI-S, CGI-Improvement scale, and Patient Global Impression of Improvement scale, while adverse events were recorded by Drug-Induced Extrapyramidal Symptoms Scale. Treatment with risperidone for either 3 or 6 weeks in an open trial significantly reduced total and subscales scores on the PANSS and on the PTSD-I and CGI-S when compared to baseline scores in patients with psychotic PTSD. Our preliminary data from the open trial indicate that risperidone decreased most of the psychotic and PTSD symptoms. Psychotic PTSD patients, unresponsive to antidepressant treatment, improved significantly after treatment for either 3 or 6 weeks with risperidone.

78 FR 42775 - CGI Federal, Inc., and Custom Applications Management; Transfer of Data

Science.gov (United States)

2013-07-17

... Applications Management, to fulfill the obligations of the contract. DATES: CGI Federal, Inc., and its... its subcontractor, Custom Applications Management, have been awarded a contract to perform work for... available at http://www.epa.gov/dockets . II. Contractor Requirements Under Contract No. GS-35F-4797H, CGI...

Effects of Milnacipran on Neurocognition, Pain, and Fatigue in Fibromyalgia: A 13-Week, Randomized, Placebo-Controlled, Crossover Trial

Science.gov (United States)

Kim, Jeong Lan; Rele, Shilpa; Marks, David M.; Masand, Prakash S.; Yerramsetty, Pallavi; Millet, Robert A.; Keefe, Richard S.

2013-01-01

Objective: To investigate whether milnacipran is safe and effective in improving cognitive function in patients with fibromyalgia. Method: Patients were randomly assigned to receive milnacipran or placebo for 6 weeks, followed by a 1-week washout and then crossover to the other arm for another 6 weeks. The overall trial lasted 13 weeks and was conducted between July 2011 and May 2013. Assessments were performed at each visit. Neurocognition was measured by the Brief Assessment of Cognition (BAC) and MATRICS. Pain was assessed by the visual analog scale (VAS) for pain. Global assessment of fibromyalgia symptoms was measured by the Fibromyalgia Impact Questionnaire (FIQ) and tender point examination. Depression was assessed by the Beck Depression Inventory (BDI). Fatigue was assessed by the Fatigue Severity Scale. Functional outcome was evaluated by the Health Assessment Questionnaire. The Clinical Global Impressions–Severity of Illness (CGI-S) and Improvement (CGI-I) scales and the Patients Clinical Global Impression of Change were used to measure the global impression of severity and improvement. Results: 26 subjects were screened, and 20 subjects completed the trial. The change in verbal memory (P = .001) and the composite T score (P = .044) of the BAC and the change in the attention-vigilance domain T score (P = .042) were significantly improved, but there were no differences between the drug and placebo groups. The changes in the CGI-S scores were not significant, but the changes in the Clinical Impression-Improvement (CGI-I) scores showed worsening in the placebo group at week 1 (P = .032), week 2 (P = .024), week 4 (P = .024), and week 6 (P = .60) compared to baseline. The change in FIQ scores was not significant. Conclusions: Milnacipran may have a potential role in the improvement of pain, disability, and mood. The effect of milnacipran on cognition in fibromyalgia needs further research. Trial Registration: ClinicalTrials.gov identifier: NCT01829243 PMID

Praktische vergelijking van uitkomstinstrumenten in de geestelijke gezondheidszorg

NARCIS (Netherlands)

Schoen, R.A.; Derksen, J.J.L.

2011-01-01

Due to several developments in (mental) health care, outcome monitoring has became more and more important. The Clinical Global Impression (CGI), Korte Klachtenlijst (KKL), Health of the Nation Outcome Scale (HoNOS), Symptom Checklist-90-R (SCL-90-R), Brief Symptom Inventory (BSI), Outcome

How the adoption of impression management goals alters impression formation.

Science.gov (United States)

Gibson, Bryan; Poposki, Elizabeth M

2010-11-01

Five experiments (N = 390) tested the hypothesis that adopting an impression management goal leads the impression manager to view an interaction partner as having less of the trait he or she is attempting to express. This hypothesis was confirmed for the impression management goals of appearing introverted, extraverted, smart, confident, and happy. Experiment 2 shows that adoption of the impression goal could alter judgments even when participants could not act on the goal. Experiment 3 provides evidence that adopting an impression management goal prompted a comparison mind-set and that this comparison mind-set activation mediated target judgments. Experiment 4 rules out a potential alternative explanation and provides more direct evidence that comparison of the impression manager's self-concept mediates the impression of the target. Experiment 5 eliminates a potential confound and extends the effect to another impression goal. These experiments highlight the dynamic interplay between impression management and impression formation.

Electronic evaluation for video commercials by impression index.

Science.gov (United States)

Kong, Wanzeng; Zhao, Xinxin; Hu, Sanqing; Vecchiato, Giovanni; Babiloni, Fabio

2013-12-01

How to evaluate the effect of commercials is significantly important in neuromarketing. In this paper, we proposed an electronic way to evaluate the influence of video commercials on consumers by impression index. The impression index combines both the memorization and attention index during consumers observing video commercials by tracking the EEG activity. It extracts features from scalp EEG to evaluate the effectiveness of video commercials in terms of time-frequency-space domain. And, the general global field power was used as an impression index for evaluation of video commercial scenes as time series. Results of experiment demonstrate that the proposed approach is able to track variations of the cerebral activity related to cognitive task such as observing video commercials, and help to judge whether the scene in video commercials is impressive or not by EEG signals.

Disruption of the Arabidopsis CGI-58 homologue produces Chanarin–Dorfman-like lipid droplet accumulation in plants

OpenAIRE

James, Christopher N.; Horn, Patrick J.; Case, Charlene R.; Gidda, Satinder K.; Zhang, Daiyuan; Mullen, Robert T.; Dyer, John M.; Anderson, Richard G. W.; Chapman, Kent D.

2010-01-01

CGI-58 is the defective gene in the human neutral lipid storage disease called Chanarin-Dorfman syndrome. This disorder causes intracellular lipid droplets to accumulate in nonadipose tissues, such as skin and blood cells. Here, disruption of the homologous CGI-58 gene in Arabidopsis thaliana resulted in the accumulation of neutral lipid droplets in mature leaves. Mass spectroscopy of isolated lipid droplets from cgi-58 loss-of-function mutants showed they contain triacylglycerols with common...

Accuracy of impressions with different impression materials in angulated implants.

Science.gov (United States)

Reddy, S; Prasad, K; Vakil, H; Jain, A; Chowdhary, R

2013-01-01

To evaluate the dimensional accuracy of the resultant (duplicative) casts made from two different impression materials (polyvinyl siloxane and polyether) in parallel and angulated implants. Three definitive master casts (control groups) were fabricated in dental stone with three implants, placed at equi-distance. In first group (control), all three implants were placed parallel to each other and perpendicular to the plane of the cast. In the second and third group (control), all three implants were placed at 10° and 15 o angulation respectively to the long axis of the cast, tilting towards the centre. Impressions were made with polyvinyl siloxane and polyether impression materials in a special tray, using a open tray impression technique from the master casts. These impressions were poured to obtain test casts. Three reference distances were evaluated on each test cast by using a profile projector and compared with control groups to determine the effect of combined interaction of implant angulation and impression materials on the accuracy of implant resultant cast. Statistical analysis revealed no significant difference in dimensional accuracy of the resultant casts made from two different impression materials (polyvinyl siloxane and polyether) by closed tray impression technique in parallel and angulated implants. On the basis of the results of this study, the use of both the impression materials i.e., polyether and polyvinyl siloxane impression is recommended for impression making in parallel as well as angulated implants.

Digital versus conventional implant impressions for edentulous patients: accuracy outcomes.

Science.gov (United States)

Papaspyridakos, Panos; Gallucci, German O; Chen, Chun-Jung; Hanssen, Stijn; Naert, Ignace; Vandenberghe, Bart

2016-04-01

To compare the accuracy of digital and conventional impression techniques for completely edentulous patients and to determine the effect of different variables on the accuracy outcomes. A stone cast of an edentulous mandible with five implants was fabricated to serve as master cast (control) for both implant- and abutment-level impressions. Digital impressions (n = 10) were taken with an intraoral optical scanner (TRIOS, 3shape, Denmark) after connecting polymer scan bodies. For the conventional polyether impressions of the master cast, a splinted and a non-splinted technique were used for implant-level and abutment-level impressions (4 cast groups, n = 10 each). Master casts and conventional impression casts were digitized with an extraoral high-resolution scanner (IScan D103i, Imetric, Courgenay, Switzerland) to obtain digital volumes. Standard tessellation language (STL) datasets from the five groups of digital and conventional impressions were superimposed with the STL dataset from the master cast to assess the 3D (global) deviations. To compare the master cast with digital and conventional impressions at the implant level, analysis of variance (ANOVA) and Scheffe's post hoc test was used, while Wilcoxon's rank-sum test was used for testing the difference between abutment-level conventional impressions. Significant 3D deviations (P impressions (P > 0.001). Digital implant impressions are as accurate as conventional implant impressions. The splinted, implant-level impression technique is more accurate than the non-splinted one for completely edentulous patients, whereas there was no difference in the accuracy at the abutment level. The implant angulation up to 15° did not affect the accuracy of implant impressions. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

An analysis of correlations among four outcome scales employed in clinical trials of patients with major depressive disorder

Directory of Open Access Journals (Sweden)

Ahmed Saeeduddin

2009-01-01

Full Text Available Abstract Background The 17-item Hamilton Depression Rating Scale (HAM-D17 remains the 'gold standard' for measuring treatment outcomes in clinical trials of depressed patients. The Montgomery Ǻsberg Depression Rating Scale (MADRS, Clinical Global Impressions-Severity (CGI-S and -Improvement (CGI-I scales are also widely used. Objective This analysis of data from 22 double-blind, placebo-controlled clinical studies of venlafaxine in adult patients with major depressive disorder was aimed at assessing correlations among these 4 scales. Methods Changes from baseline for MADRS, HAM-D17 and CGI-S, and end point CGI-I scores and response (≥50% decrease from baseline HAM-D17 or MADRS, or CGI-S or CGI-I score ≤2 were analysed. Pearson correlation coefficients were calculated for all pairs of the four scales (HAM-D17/MADRS, HAM-D17/CGI-S, HAM-D17/CGI-I, MADRS/CGI-S, MADRS/CGI-I, CGI-S/CGI-I at different time points. Effect sizes were calculated using the Cohen d. Results Correlations were significant at all time points (p 17 or CGI-S for continuous measures and response. Conclusion Although MADRS and CGI-I were more sensitive to treatment effects, HAM-D17, MADRS, CGI-S and CGI-I scores present a consistent picture of response to venlafaxine treatment.

Impression Cytology

Directory of Open Access Journals (Sweden)

Sevda Söker

2007-01-01

Full Text Available Impression cytology is fast, easy to perform, economical and non-invasive technique for the diagnosis of conjunctival eye diseases. Conjunctival impression cytology using cellulose acetate filter paper of the ocular surface epithelium with no side effects or contraindication. In this article, technique of conjunctival impression cytology is reviewed.

Accuracy of implant impressions without impression copings: a three-dimensional analysis.

Science.gov (United States)

Kwon, Joo-Hyun; Son, Yong-Ha; Han, Chong-Hyun; Kim, Sunjai

2011-06-01

Implant impressions without impression copings can be used for cement-retained implant restorations. A comparison of the accuracy of implant impressions with and without impression copings is needed. The purpose of this study was to evaluate and compare the dimensional accuracy of implant definitive casts that are fabricated by implant impressions with and without impression copings. An acrylic resin maxillary model was fabricated, and 3 implant replicas were secured in the right second premolar, first, and second molars. Two impression techniques were used to fabricate definitive casts (n=10). For the coping group (Group C), open tray impression copings were used for the final impressions. For the no-coping group (Group NC), cementable abutments were connected to the implant replicas, and final impressions were made assuming the abutments were prepared teeth. Computerized calculation of the centroids and long axes of the implant or stone abutment replicas was performed. The Mann-Whitney U test analyzed the amount of linear and rotational distortion between groups (α =.05). At the first molar site, Group NC showed significantly greater linear distortion along the Y-axis, with a small difference between the groups (Group C, 7.8 ± 7.4 μm; Group NC, 19.5 ± 12.2). At the second molar site, increased distortion was noted in Group NC for every linear and rotational variable, except for linear distortion along the Z-axis. Implant impression with open tray impression copings produced more accurate definitive casts than those fabricated without impression copings, especially those with greater inter-abutment distance. Copyright © 2011 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Torque resistance of impression copings after direct implant impression: An in vitro evaluation of impression materials with and without adhesive.

Science.gov (United States)

Auroy, Pascal; Nicolas, Emanuel; Bedouin, Yvan

2017-01-01

No data are available on the ability of an impression coping to resist the manual placement of an abutment replica (implant analog) during prosthodontic laboratory procedures after a direct (pick-up) impression. The purpose of this in vitro study was to evaluate the torque resistance of impression copings after a direct impression, that is, the amount of rotational torque sufficient to induce irreversible displacement of impression copings in the impression material bulk once the impression has been made. A reference model with 5 abutment replicas was constructed. Five impression copings were screwed onto the abutment replicas, and standardized impressions were made. A controlled twisting force was applied to each impression coping. A torque tester recorded the torque variation. Three elastomeric impression materials were tested. ANOVA and the Tukey test (α=.05) were performed using an average of 30 measurements per impression material, with and without adhesive. ANOVA and the Tukey test results showed that the adhesive, cohesive, and mechanical bonds between the impression coping and the impression material depended greatly on the type of material and that the average rupture threshold of these bonds was statistically significantly different in pairwise comparisons (Ptorque. The polyether impression material is the direct impression material that showed the highest breakdown threshold for adhesive bonding when used without an adhesive. The use of an adhesive on impression copings leads to irreversible deformation of the interface at torque stresses well below the adhesive bond threshold of the same materials used without an adhesive. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

[Impressions techniques--Part 2].

Science.gov (United States)

Levartovsky, S; Masri, M; Alter, E; Pilo, R

2012-10-01

A dental impression is a positive replica of the teeth, the surrounding gingiva and the border between them; the purpose of which is to create an accurate master model. Two major techniques for impressions exist today: The conventional and the digital impressions. The current article describes both techniques. In the conventional impressions, it is important to choose a proper tray, stock or custom, and to mix the material properly. The commonly used impression techniques for making a conventional impression are described with a review on the effect of the technique on its accuracy. The effect of the wash bulk on the accuracy of the stone dies and/or the restoration is discussed, as well. The digital impressions with their advantages and disadvantages are described in comparison to the conventional impressions. Although, digital impressions eliminate some of the negative characteristics of conventional impressions, proper soft-tissue management and isolation of tooth preparation margins is still mandatory.

A multicenter, open-label trial to evaluate the quality of life in adults with ADHD treated with long-acting methylphenidate (OROS MPH): Concerta Quality of Life (CONQoL) study.

Science.gov (United States)

Mattos, Paulo; Louzã, Mário Rodrigues; Palmini, André Luís Fernandes; de Oliveira, Irismar Reis; Rocha, Fábio Lopes

2013-07-01

The available literature provides few studies on the effectiveness of methylphenidate in improving quality of life in individuals with ADHD. To assess the effectiveness of methylphenidate OROS formulation (OROS MPH) through QoL in adults with ADHD. A 12-week, multicenter, open-label trial involving 60 patients was used. The measures used were Adult Self-Rating Scale, Adult ADHD Quality of Life Scale (AAQoL), State and Trait Anxiety Inventory (STAI), Hamilton Depression Rating Scale (HAM-D), Clinical Global Impression (CGI), and safety measures. A significance statistic level of 5% was adopted. Analyses included 60 patients (66.7% male; M age = 31.1 years) for safety and 58 patients for effectiveness. All AAQoL subscales improved from baseline to Week 12 (p < .0001), as well as the Total AAQoL (p < .0001). A significant reduction on Clinical Global Impression-Improvement (CGI-I), HAM-D, STAI, and ASRS scores was observed (p < .0001). No serious adverse event was reported. Treatment of adult ADHD patients with OROS MPH improves QoL.

Accuracy of impressions with different impression materials in ...

African Journals Online (AJOL)

Purpose: To evaluate the dimensional accuracy of the resultant (duplicative) casts made from two ... materials in a special tray, using a open tray impression technique from the master casts. These impressions were poured to obtain test casts.

[Changes in quality of life and work function during phase prophylactic lamotrigine treatment in bipolar patients: 6 month, prospective, observational study].

Science.gov (United States)

Gonda, Xenia; Kalman, Janos; Dome, Peter; Rihmer, Zoltan

2016-03-01

Bipolar disorder is a lifelong illness requiring lifelong pharmacotherapy. Therefore besides symptomatic remission, achievement of full work-related functioning and restoration of quality of life is a priority during successful treatment. The present prospective, observational, non-intervention study focused on investigating the effect of lamotrigine therapy on the quality of life and work-related function of bipolar patients in outpatient care. 969 bipolar or schizoaffective outpatients participated in the study who previously did not receive lamotrigine therapy. Our present phase-prophylactic study was a prospective, observational, non-intervention study with a six-month follow-up. Evaluations took place at baseline and at months 1, 2, 3 and 6. Patients were followed with a Clinical Global Impression-Severity (CGI-S) and Clinical Global Impression-Improvement (CGI-I). Changes in work-related function was evaluated using Social Adjustment Scale (SAS), while quality of life was assessed with the Quality of Life Enjoyment and Satisfaction Questionnaire (Q-LES-Q) scale. SAS scoreds showed a consistent decrease in the overall sample and in all CGI-S initial groups reflecting the improvement of work-related function during the six months of the follow-up. Q-LES-Q values in the whole sample and in all initial CGI-S groups showed a steady increase indicating a continuous increase in quality of life during the study. Our results indicate that during long-term prophylactic lamotrigine therapy the work function and quality of life of bipolar patients shows a significant improvement, therefore lamotrigine provides a possibility for full functional remission and restoration of quality of life.

Divalproex Sodium for the Treatment of PTSD and Conduct Disordered Youth: A Pilot Randomized Controlled Clinical Trial

Science.gov (United States)

Steiner, Hans; Saxena, Kirti S.; Carrion, Victor; Khanzode, Leena A.; Silverman, Melissa; Chang, Kiki

2007-01-01

We examined the efficacy of divalproex sodium (DVP) for the treatment of PTSD in conduct disorder, utilizing a previous study in which 71 youth were enrolled in a randomized controlled clinical trial. Twelve had PTSD. Subjects (all males, mean age 16, SD 1.0) were randomized into high and low dose conditions. Clinical Global Impression (CGI)…

Bifactor and Item Response Theory Analyses of Interviewer Report Scales of Cognitive Impairment in Schizophrenia

Science.gov (United States)

Reise, Steven P.; Ventura, Joseph; Keefe, Richard S. E.; Baade, Lyle E.; Gold, James M.; Green, Michael F.; Kern, Robert S.; Mesholam-Gately, Raquelle; Nuechterlein, Keith H.; Seidman, Larry J.; Bilder, Robert

2011-01-01

A psychometric analysis of 2 interview-based measures of cognitive deficits was conducted: the 21-item Clinical Global Impression of Cognition in Schizophrenia (CGI-CogS; Ventura et al., 2008), and the 20-item Schizophrenia Cognition Rating Scale (SCoRS; Keefe et al., 2006), which were administered on 2 occasions to a sample of people with…

Skeletal muscle PLIN proteins, ATGL and CGI-58, interactions at rest and following stimulated contraction

OpenAIRE

MacPherson, Rebecca E. K.; Ramos, Sofhia V.; Vandenboom, Rene; Roy, Brian D.; Peters, Sandra J.

2013-01-01

Evidence indicates that skeletal muscle lipid droplet-associated proteins (PLINs) regulate lipolysis through protein-protein interactions on the lipid droplet surface. In adipocytes, PLIN1 is thought to regulate lipolysis by directly interacting with comparative gene identification-58 (CGI-58), an activator of adipose triglyceride lipase (ATGL). Upon lipolytic stimulation, PLIN1 is phosphorylated, releasing CGI-58 to fully activate ATGL and initiate triglyceride breakdown. The absence of PLIN...

Can physician examiners overcome their first impression when examinee performance changes?

Science.gov (United States)

Wood, Timothy J; Pugh, Debra; Touchie, Claire; Chan, James; Humphrey-Murto, Susan

2018-03-20

There is an increasing focus on factors that influence the variability of rater-based judgments. First impressions are one such factor. First impressions are judgments about people that are made quickly and are based on little information. Under some circumstances, these judgments can be predictive of subsequent decisions. A concern for both examinees and test administrators is whether the relationship remains stable when the performance of the examinee changes. That is, once a first impression is formed, to what degree will an examiner be willing to modify it? The purpose of this study is to determine the degree that first impressions influence final ratings when the performance of examinees changes within the context of an objective structured clinical examination (OSCE). Physician examiners (n = 29) viewed seven videos of examinees (i.e., actors) performing a physical exam on a single OSCE station. They rated the examinees' clinical abilities on a six-point global rating scale after 60 s (first impression or FIGR). They then observed the examinee for the remainder of the station and provided a final global rating (GRS). For three of the videos, the examinees' performance remained consistent throughout the videos. For two videos, examinee performance changed from initially strong to weak and for two videos, performance changed from initially weak to strong. The mean FIGR rating for the Consistent condition (M = 4.80) and the Strong to Weak condition (M = 4.87) were higher compared to their respective GRS ratings (M = 3.93, M = 2.73) with a greater decline for the Strong to Weak condition. The mean FIGR rating for the Weak to Strong condition was lower (3.60) than the corresponding mean GRS (4.81). This pattern of findings suggests that raters were willing to change their judgments based on examinee performance. Future work should explore the impact of making a first impression judgment explicit versus implicit and the role of context on the

The efficacy and safety of 10 mg vortioxetine in the treatment of major depressive disorder: a meta-analysis of randomized controlled trials

Directory of Open Access Journals (Sweden)

Li G

2016-02-01

Full Text Available Guangjian Li, Xu Wang, Dihui Ma Department of Neurology and Neuroscience Center, First Hospital of Jilin University, Changchun, People’s Republic of China Background: Vortioxetine is an investigational multimodal antidepressant. We conducted this meta-analysis to assess the efficacy and safety of 10 mg vortioxetine in the treatment of major depressive disorder (MDD. Methods: Randomized controlled trials (RCTs published in PubMed, Web of Science, Embase, and ClinicalTrials.gov were systematically reviewed to assess the treatment effects and safety profiles of patients with MDD who were treated with 10 mg vortioxetine. The outcome measures included response rate, remission rate, changes from baseline in Montgomery–Asberg Depression Rating Scale (MADRS, Hamilton Rating Scale for Depression (24-items (HAM-D24, Clinical Global Impression-Severity (CGI-S, and Clinical Global Impression-Improvement (CGI-I scores. Results were expressed with risk ratio or weighted mean difference with 95% confidence intervals. Pooled results were calculated using a fixed-effects model or a random-effects model according to the heterogeneity among included trials. Results: Six RCTs with a total of 1,801 patients met the inclusion criteria and were included in this meta-analysis. The 10 mg vortioxetine dose significantly increased the response rate and remission rate in the treatment of MDD compared with placebo. Moreover, there was a statistically significant reduction from baseline in the MADRS, HAM-D24, CGI-S, and CGI-I scores with 10 mg vortioxetine vs placebo. The incidence of treatment-emergent adverse events such as nausea, vomiting, constipation, and hyperhidrosis was higher in the 10 mg vortioxetine group than in the placebo group. Conclusion: Vortioxetine 10 mg can significantly increase the response rate and remission rate, and reduce the MADRS, HAM-D24, CGI-S, and CGI-I scores in patients with MDD with an acceptable risk of treatment-emergent adverse

[Precision of digital impressions with TRIOS under simulated intraoral impression taking conditions].

Science.gov (United States)

Yang, Xin; Sun, Yi-fei; Tian, Lei; Si, Wen-jie; Feng, Hai-lan; Liu, Yi-hong

2015-02-18

To evaluate the precision of digital impressions taken under simulated clinical impression taking conditions with TRIOS and to compare with the precision of extraoral digitalizations. Six #14-#17 epoxy resin dentitions with extracted #16 tooth preparations embedded were made. For each artificial dentition, (1)a silicone rubber impression was taken with individual tray, poured with type IV plaster,and digitalized with 3Shape D700 model scanner for 10 times; (2) fastened to a dental simulator, 10 digital impressions for each were taken with 3Shape TRIOS intraoral scanner. To assess the precision, best-fit algorithm and 3D comparison were conducted between repeated scan models pairwise by Geomagic Qualify 12.0, exported as averaged errors (AE) and color-coded diagrams. Non-parametric analysis was performed to compare the precisions of digital impressions and model images. The color-coded diagrams were used to show the deviations distributions. The mean of AE for digital impressions was 7.058 281 μm, which was greater than that of 4.092 363 μm for the model images (Pimpressions were no more than 10 μm, which meant that the consistency between the digital impressions was good. The deviations distribution was uniform in the model images,while nonuniform in the digital impressions with greater deviations lay mainly around the shoulders and interproximal surfaces. Digital impressions with TRIOS are of good precision and up to the clinical standard. Shoulders and interproximal surfaces scanning are more difficult.

The IFS for WFIRST CGI: Science Requirements to Design

Science.gov (United States)

Groff, Tyler; Gong, Qian; Mandell, Avi M.; Zimmerman, Neil; Rizzo, Maxime; McElwain, Michael; harvey, david; Saxena, Prabal; cady, eric; mejia prada, camilo

2018-01-01

Direct Imaging of exoplanets using a coronagraph has become a major field of research both on the ground and in space. Key to the science of direct imaging is the spectroscopic capabilities of the instrument, our ability to extract spectra, and measure the abundance of molecular species such as Methane. To take these spectra, the WFIRST coronagraph instrument (CGI) uses an integral field spectrograph (IFS), which encodes the spectrum into a two-dimensional image on the detector. This results in more efficient detection and characterization of targets, and the spectral information is critical to achieving detection limits below the speckle floor of the imager. The CGI IFS operates in three 18% bands spanning 600nm to 970nm at a nominal spectral resolution of R50. We present the current science and engineering requirements for the IFS design, the instrument design, anticipated performance, and how the calibration is integrated into the focal plane wavefront control algorithms. We also highlight the role of the Prototype Imaging Spectrograph for Coronagraphic Exoplanet Studies (PISCES) at the JPL High Contrast Imaging Testbed to demonstrate performance and validate calibration methodologies for the flight instrument.

Visualization of Global Disease Burden for the Optimization of Patient Management and Treatment

Directory of Open Access Journals (Sweden)

Winfried Schlee

2017-06-01

Full Text Available BackgroundThe assessment and treatment of complex disorders is challenged by the multiple domains and instruments used to evaluate clinical outcome. With the large number of assessment tools typically used in complex disorders comes the challenge of obtaining an integrative view of disease status to further evaluate treatment outcome both at the individual level and at the group level. Radar plots appear as an attractive visual tool to display multivariate data on a two-dimensional graphical illustration. Here, we describe the use of radar plots for the visualization of disease characteristics applied in the context of tinnitus, a complex and heterogeneous condition, the treatment of which has shown mixed success.MethodsData from two different cohorts, the Swedish Tinnitus Outreach Project (STOP and the Tinnitus Research Initiative (TRI database, were used. STOP is a population-based cohort where cross-sectional data from 1,223 non-tinnitus and 933 tinnitus subjects were analyzed. By contrast, the TRI contained data from 571 patients who underwent various treatments and whose Clinical Global Impression (CGI score was accessible to infer treatment outcome. In the latter, 34,560 permutations were tested to evaluate whether a particular ordering of the instruments could reflect better the treatment outcome measured with the CGI.ResultsRadar plots confirmed that tinnitus subtypes such as occasional and chronic tinnitus from the STOP cohort could be strikingly different, and helped appreciate a gender bias in tinnitus severity. Radar plots with greater surface areas were consistent with greater burden, and enabled a rapid appreciation of the global distress associated with tinnitus in patients categorized according to tinnitus severity. Permutations in the arrangement of instruments allowed to identify a configuration with minimal variance and maximized surface difference between CGI groups from the TRI database, thus affording a means of optimally

In Vitro Comparative Evaluation of Different Types of Impression Trays and Impression Materials on the Accuracy of Open Tray Implant Impressions: A Pilot Study

Directory of Open Access Journals (Sweden)

Sonam Gupta

2017-01-01

Full Text Available Purpose. For a precise fit of multiple implant framework, having an accurate definitive cast is imperative. The present study evaluated dimensional accuracy of master casts obtained using different impression trays and materials with open tray impression technique. Materials and Methods. A machined aluminum reference model with four parallel implant analogues was fabricated. Forty implant level impressions were made. Eight groups (n=5 were tested using impression materials (polyether and vinylsiloxanether and four types of impression trays, two being custom (self-cure acrylic and light cure acrylic and two being stock (plastic and metal. The interimplant distances were measured on master casts using a coordinate measuring machine. The collected data was compared with a standard reference model and was statistically analyzed using two-way ANOVA. Results. Statistically significant difference (p0.05 was observed between varied stock and custom trays. Conclusions. The polyether impression material proved to be more accurate than vinylsiloxanether impression material. The rigid nonperforated stock trays, both plastic and metal, could be an alternative for custom trays for multi-implant impressions when used with medium viscosity impression materials.

Group interpersonal and social rhythm therapy for bipolar depression.

Science.gov (United States)

Hoberg, Astrid A; Ponto, Julie; Nelson, Pamela J; Frye, Mark A

2013-10-01

To evaluate the feasibility of 2-week interpersonal and social rhythm therapy group (IPSRT-G) for bipolar depression. Participants with bipolar depression received two individual sessions, six IPSRT-G sessions, and a 12-week telephone call. The Inventory of Depressive Symptomatology-Clinician Rated (IDS-C), Young Mania Rating Scale (YMRS), Sheehan Disability Scale (SDS), and Clinical Global Impressions-Bipolar Version (CGI-BP) were used. IDS-C and SDS scores improved significantly at 12 weeks. YMRS and CGI-BP scores improved but did not reach statistical significance. The promising antidepressive response supports further study of IPSRT-G for bipolar depression. © 2013 Wiley Periodicals, Inc.

Comparing Efficacy and Side Effects of Memantine vs. Risperidone in the Treatment of Autistic Disorder.

Science.gov (United States)

Nikvarz, Nikvarz; Alaghband-Rad, Javad; Tehrani-Doost, Mehdi; Alimadadi, Abbas; Ghaeli, Padideh

2017-01-01

Introduction: This study was aimed to compare the efficacy and side effects of memantine, an antagonist of the NMDA receptor of glutamate, with risperidone given the fact that glutamate has been noted for its possible effects in the pathogenesis of autism. Risperidone, an atypical antipsychotic, has been approved by FDA for the management of irritability associated with autism. Methods: 30 children, aged 4-17 years, entered an 8-week, randomized trial. Patients were randomly assigned to receive either risperidone or memantine. Autism Behavior Checklist (ABC), Childhood Autism Rating Scale (CARS), Clinical Global Impressions - Improvement (CGI-I) and Clinical Global Impression-Severity (CGI-S) scales were used to assess behavioral symptoms of the patients. Results: Both risperidone and memantine reduced the scores of 4 subscales of ABC as well as the 10-item and the total score of CARS significantly. However, differences between the 2 drugs in the scores of each evaluating scale were not found to be significant. Relatively, larger number of patients on risperidone showed "very much improvement" when assessed by CGI-I scale when compared with those on memantine. Discussion and conclusion: The present study suggests that memantine may have beneficial effects in the treatment of many core symptoms of autism. Therefore, memantine may be considered as a potential medication in the treatment of those autistic children who do not respond or cannot tolerate side effects of risperidone. © Georg Thieme Verlag KG Stuttgart · New York.

Modification of First Impression Formation and "Personality" by Manipulating Outer Appearance.

Science.gov (United States)

Hüttner, Susanne-Marie; Linden, Michael

2017-01-01

Global impression is the first item in any psychopathological evaluation, as patients often elicit negative responses in other persons by a dysfunctional first impression formation. This can lead to interactional problems and stigmatization. This study tested to what degree the perception of "personality" can be changed by simple manipulations of the outer appearance of a person. A total of 92 persons were given two different photos of the same female, one with hair combed back and the other with "open" curly hair. For each picture they made ratings on the Bipolar MED Rating Scale, which asks for judgements on 23 emotional impressions. The rating on the "two" persons differed significantly for 16 of the 23 items. Curled open hair led to a more open-hearted and trusting impression, while the combed-back hair was perceived as more reserved, earnest, and defiant. Results were independent of age and gender. People come to far-reaching conclusions about the "personality" of other persons (first impression formation) based on the outer appearance. This opens treatment options for improving social interaction and fighting stigma in patients with mental disorders. © 2017 S. Karger AG, Basel.

Two-step impression/ injection, an alternative putty/ wash impression technique: case report.

Science.gov (United States)

Caputi, S; Murmura, G; Sinjari, B; Varvara, G

2012-01-01

We here describe a new technique for making a definitive impression that we refer to as the two-step impression/injection technique. This technique initially follows the classical one-step putty/ light-body impression technique with the polymerization of the putty and the light-body compound. This is then followed by the second step: injection of extra-light-body compound into the preparation through a hole in the metal stock tray. The aim of this additional step is to control the wash bulk and minimize the changes that can produce unfavorable impression results. This new two-step impression/injection technique allows displacement of soft tissues, such as the tongue, during the first seating of the putty and wash materials, while in the second step, the extra-light-body compound records all of the finer details without being compressed.

A Comparative Evaluation of the Linear Dimensional Accuracy of Four Impression Techniques using Polyether Impression Material.

Science.gov (United States)

Manoj, Smita Sara; Cherian, K P; Chitre, Vidya; Aras, Meena

2013-12-01

There is much discussion in the dental literature regarding the superiority of one impression technique over the other using addition silicone impression material. However, there is inadequate information available on the accuracy of different impression techniques using polyether. The purpose of this study was to assess the linear dimensional accuracy of four impression techniques using polyether on a laboratory model that simulates clinical practice. The impression material used was Impregum Soft™, 3 M ESPE and the four impression techniques used were (1) Monophase impression technique using medium body impression material. (2) One step double mix impression technique using heavy body and light body impression materials simultaneously. (3) Two step double mix impression technique using a cellophane spacer (heavy body material used as a preliminary impression to create a wash space with a cellophane spacer, followed by the use of light body material). (4) Matrix impression using a matrix of polyether occlusal registration material. The matrix is loaded with heavy body material followed by a pick-up impression in medium body material. For each technique, thirty impressions were made of a stainless steel master model that contained three complete crown abutment preparations, which were used as the positive control. Accuracy was assessed by measuring eight dimensions (mesiodistal, faciolingual and inter-abutment) on stone dies poured from impressions of the master model. A two-tailed t test was carried out to test the significance in difference of the distances between the master model and the stone models. One way analysis of variance (ANOVA) was used for multiple group comparison followed by the Bonferroni's test for pair wise comparison. The accuracy was tested at α = 0.05. In general, polyether impression material produced stone dies that were smaller except for the dies produced from the one step double mix impression technique. The ANOVA revealed a highly

An Assessment of Five (PANSS, SAPS, SANS, NSA-16, CGI-SCH) commonly used Symptoms Rating Scales in Schizophrenia and Comparison to Newer Scales (CAINS, BNSS).

Science.gov (United States)

Kumari, Suneeta; Malik, Mansoor; Florival, Christina; Manalai, Partam; Sonje, Snezana

2017-01-01

Scales measuring positive and negative symptoms in schizophrenia remain the primary mo Scales measuring positive and negative symptoms in schizophrenia remain the primary mode of assessing and diagnosing schizophrenia by clinicians and researchers. The scales are mainly used to monitor the severity of positive and negative symptoms and track treatment response in schizophrenics. Although these scales are widely used, quality as well as general utility of each scale varies. The quality is determined by the validity and reliability of the scales. The utility of the scale is determined by the time of administration and the settings for which the scales can be administered in research or clinical settings. There are relatively fewer articles on the utility of newer scales like CAINS (Clinical Assessment Interview for Negative Symptoms) and the BNSS (Brief Negative Symptom Scale) that compare them to the older scales PANSS (Positive and Negative Symptoms Scale), SAPS (Scale for the Assessment of Positive Symptoms) SANS (the Scale for the Assessment of Negative Symptoms), NSA-16 (Negative Symptom Assessment-16) and CGI-SCH (Clinical Global Impression Schizophrenia. The older scales were developed more than 30 years ago. Since then, our understanding of negative symptoms has evolved and currently there are newer rating scales evaluating the validity of negative symptoms. The older scales do not incorporate the latest research on negative symptoms. CAINS and BNSS are attractive for both their reliability and their concise accessible format, however, a scale that is simpler, accessible, user-friendly, that incorporates a multidimensional model of schizophrenia, addresses the psychosocial and cognitive component has yet to be developed.

Joint utility task group CGI data-base procurement history module

International Nuclear Information System (INIS)

Rosch, F.

1993-01-01

The purpose of the procurement history record module of the Joint Utility Task Group's (JUTG's) commercial-grade item (CGI) data base is to assist utilities to cost effectively implement the dedication methodology provided in the Electric Power Research Institute's (EPRI's) report NP-5652, open-quotes Guidelines for the Utilization of Commercial Grade Items in Nuclear Safety-Related Applications.close quotes

Impression Generation of Indonesian Cultural Paintings for Mobile Application with Culture Dependent Color-Impression Metric Creation Contents

Directory of Open Access Journals (Sweden)

Devira Nanda Kuswhara

2014-06-01

Full Text Available Painting is one of complex image reflecting observations and feelings of the artist to the environment. This condition extends the need of painting impression generation system since common people with lack of art experience would have difficulties to interpret the painting. From this point of view we presents a new model to provide representative impressions of paintings by providing a color-impression metric taken from public survey and implement it for mobile application. The new model provides analytical functions to generate the representative impression of the image query. The functions consist of two main section: (1 The cultural-dependent color-impression metric creation which consist of conducting survey, applying normalized 3D color vector quantization to image dataset, generating image-impression metric, and generating color- impression metric; and (2 Impression generation of image query which consist of applying normalized 3D color vector quantization to image query and measuring the similarity between image query andcolor-impression metric. To perform our proposed impression generation system, we examine our system with Indonesian cultural image dataset and 5 different mobile devices. Our proposed system performs main color impression precision result with average precision of more than 60%. Brightness intensity and zooming affects the retrieved impressions. Rotating captures of an image generate the same retrieved impressions. The system also performs average response time vary in range 41263 to 117434 milliseconds from all devices. Keywords: impression generation system, color based impression, cultural computing, mobile application.

Three-dimensional accuracy of a digitally coded healing abutment implant impression system.

Science.gov (United States)

Ng, Simon D; Tan, Keson B; Teoh, K H; Cheng, Ansgar C; Nicholls, Jack I

2014-01-01

This study examined the three-dimensional (3D) accuracy of the Encode Impression System (EN) in transferring the locations of two implants from master models to test models and compared this to the direct impression (DI) technique. The effect of interimplant angulation on the 3D accuracy of both impression techniques was also evaluated. Seven sectional polymethyl methacrylate mandibular arch master models were fabricated with implants in the first premolar and first molar positions. The implants were placed parallel to each other or angulated mesiodistally or buccolingually with total divergent angles of 10, 20, or 30 degrees. Each master model was secured onto an aluminum block containing a gauge block, which defined the local coordinate references. Encode healing abutments were attached to the implants before impressions were made for the EN test models; pickup impression copings were attached for the DI test models. For the seven test groups of each impression technique, a total of 70 test models were fabricated (n = 5). The EN test models were sent to Biomet 3i for implant analog placement. The centroid of each implant or implant analog and the angular orientation of the long axis relative to the x- and y-axes were measured with a coordinate measuring machine. Statistical analyses were performed. Impression technique had a significant effect on y distortion, global linear distortion, and absolute xz and yz angular distortions. Interimplant angulation had significant effects on x and y distortions. However, neither impression technique nor interimplant angulation had a significant effect on z distortion. Distortions were observed with both impression techniques. However, the results suggest that EN was less accurate than DI.

Commercial Grade Item (CGI) dedication - on complex electronic equipment

International Nuclear Information System (INIS)

Sohn, Kwang Young; Kim, Joong Han; Koo, In Soo; Lee, Sang Yong

2008-01-01

In future more complicated IT-based hardware and software is supposed to used in the safety-grade systems in nuclear power plants. Also there are the efforts to establish the criteria for CGI dedications in NRC and CEC dedication in other standard organizations. The highly complicated components, i.e. CEC should be dedication plans. Thus work to be done in later is to prepare the strategies, plans, guide and procedures that is more specific for CEC dedication

Impression block with orientator

International Nuclear Information System (INIS)

Brilin, V I; Ulyanova, O S

2015-01-01

Tool review, namely the impression block, applied to check the shape and size of the top of fish as well as to determine the appropriate tool for fishing operation was realized. For multiple application and obtaining of the impress depth of 3 cm and more, the standard volumetric impression blocks with fix rods are used. However, the registered impress of fish is not oriented in space and the rods during fishing are in the extended position. This leads to rods deformation and sinking due to accidental impacts of impression block over the borehole irregularity and finally results in faulty detection of the top end of fishing object in hole. The impression blocks with copy rods and fixed magnetic needle allow estimating the object configuration and fix the position of magnetic needle determining the position of the top end of object in hole. However, the magnetic needle fixation is realized in staged and the rods are in extended position during fishing operations as well as it is in standard design. The most efficient tool is the impression block with copy rods which directs the examined object in the borehole during readings of magnetic needles data from azimuth plate and averaging of readings. This significantly increases the accuracy of fishing toll direction. The rods during fishing are located in the body and extended only when they reach the top of fishing object

Technical Evaluation for the Determination of CGI Designation for Safety Class Items Incorporated in Hose-in-Hose Transfer Line Assemblies

International Nuclear Information System (INIS)

BUCHANAN, J.R.

2000-01-01

The purpose of this technical evaluation is to determine whether the secondary hoses are to be categorized as Commercial Grade Items (CGI) or Engineered Equipment. This determination will identify whether or not use of the CGI Dedication process is appropriate

A Comparative Evaluation of the Linear Dimensional Accuracy of Four Impression Techniques using Polyether Impression Material

OpenAIRE

Manoj, Smita Sara; Cherian, K. P.; Chitre, Vidya; Aras, Meena

2013-01-01

There is much discussion in the dental literature regarding the superiority of one impression technique over the other using addition silicone impression material. However, there is inadequate information available on the accuracy of different impression techniques using polyether. The purpose of this study was to assess the linear dimensional accuracy of four impression techniques using polyether on a laboratory model that simulates clinical practice. The impression material used was Impregu...

ETI: Our first impressions

Science.gov (United States)

Harrison, Albert A.; Johnson, Joel T.

2000-06-01

Despite scant or ambiguous information, people are capable of developing comprehensive and detailed impressions. Consequently, if the detection of an electromagnetically-active civilization is announced, many people will rapidly form impressions of what the extraterrestrials and their civilization are "like". First impressions are crucial, not only because of their immediate psychological, social, and political consequences on Earth, but because they can influence the future of interstellar communication. Initial impressions will rest less on hard data than on the nature and tone of the "evidence" that is gleaned from the transmission; the interpretation and dissemination of this evidence; and the hard wiring, psychological programming, cultural conditioning, and social influence processes that shape human perception. We consider how dispositional inferences, implicit theories of personality, negatively toned or adverse information, physical appearance, prior expectations, the confirmation bias, and thinking and unthinking approaches to attitude formation are likely to affect human impressions of ETI.

Comparison of Adaptation between the Major Connectors Fabricated from Intraoral Digital Impressions and Extraoral Digital Impressions.

Science.gov (United States)

Gan, Ning; Ruan, Yaye; Sun, Jian; Xiong, Yaoyang; Jiao, Ting

2018-01-11

The objective was to compare the adaptation between the major connectors of removable partial dentures derived from intraoral digital impressions and extraoral digital impressions. Twenty-four volunteers were enrolled. Each volunteer received an intraoral digital impression and one extraoral digital impression digitized from conventional gypsum impression. A software was used to create the major connectors on digital impression datasets. After all the virtual major connectors designed from Group intraoral digital impressions (Group I) and Group extraoral digital impressions (Group E) were directly fabricated by 3D printing technique, the adaptation of the final major connectors in volunteers' mouths were measured. The adaptation ranged from 159.87 to 577.99 μm in Group I while from 120.83 to 536.17 μm in Group E. The adaptation of major connectors in Group I were found better at the midline palatine suture while the adaptation of major connectors in Group E were found better at the two sides of the palatal vault. In both groups, the highest accuracy in adaptation was revealed at the anterior margin of the major connectors. It is feasible to manufacture the major connectors by digital impression and 3D printing technique. Both the adaptation of the two kinds of digital impressions were clinical acceptable.

Giving the wrong impression: food and beverage brand impressions delivered to youth through popular movies.

Science.gov (United States)

Skatrud-Mickelson, Monica; Adachi-Mejia, Anna M; MacKenzie, Todd A; Sutherland, Lisa A

2012-06-01

Marketing on television showcases less-healthful options, with emerging research suggesting movies promote similar products. Given the obesity epidemic, understanding advertising to youth should be a public health imperative. The objective of this study was to estimate youth impressions to food and beverages delivered through movies. Impressions were calculated by dividing US receipts annually into average movie ticket prices, then multiplying this by the number of brand appearances. Examination by ratings, product types and ages were conducted by Spearman rank correlation coefficient tests. Youth in the USA saw over 3 billion food, beverage or food-retail establishment (FRE) impressions on average, annually from 1996 to 2005. Those aged 12-18 viewed over half of all impressions, with PG-13-rated movies containing 61.5% of impressions. There were no significant trends in brand appearances by food, beverage or FRE impressions over the decade, although there was a decreasing trend in R-rated impressions for both foods (Pbeverages (Pfood and beverage impressions annually to youth. Given the public health crisis of obesity, future research should further investigate these trends, as well as the potential association of these unhealthy exposures in youth.

Digital vs. conventional implant impressions: efficiency outcomes.

Science.gov (United States)

Lee, Sang J; Gallucci, German O

2013-01-01

The aim of this pilot study was to evaluate the efficiency, difficulty and operator's preference of a digital impression compared with a conventional impression for single implant restorations. Thirty HSDM second year dental students performed conventional and digital implant impressions on a customized model presenting a single implant. The outcome of the impressions was evaluated under an acceptance criteria and the need for retake/rescan was decided. The efficiency of both impression techniques was evaluated by measuring the preparation, working, and retake/scan time (m/s) and the number of retakes/rescans. Participants' perception on the level of difficulty for the both impressions was assessed with a visual analogue scale (VAS) questionnaire. Multiple questionnaires were obtained to assess the participants' perception on preference, effectiveness and proficiency. Mean total treatment time was of 24:42 m/s for conventional and 12:29 m/s for digital impressions (P impressions (P impression (P impression technique and 30.63 (±17.57) for digital impression technique (P = 0.006). Sixty percent of the participants preferred the digital impression, 7% the conventional impression technique and 33% preferred either technique. Digital impressions resulted in a more efficient technique than conventional impressions. Longer preparation, working, and retake time were consumed to complete an acceptable conventional impression. Difficulty was lower for the digital impression compared with the conventional ones when performed by inexperienced second year dental students. © 2012 John Wiley & Sons A/S.

Accuracy of a new elastomeric impression material for complete-arch dental implant impressions.

Science.gov (United States)

Baig, Mirza R; Buzayan, Muaiyed M; Yunus, Norsiah

2018-05-01

The aim of the present study was to assess the accuracy of multi-unit dental implant casts obtained from two elastomeric impression materials, vinyl polyether silicone (VPES) and polyether (PE), and to test the effect of splinting of impression copings on the accuracy of implant casts. Forty direct impressions of a mandibular reference model fitted with six dental implants and multibase abutments were made using VPES and PE, and implant casts were poured (N = 20). The VPES and PE groups were split into four subgroups of five each, based on splinting type: (a) no splinting; (b) bite registration polyether; (c) bite registration addition silicone; and (d) autopolymerizing acrylic resin. The accuracy of implant-abutment replica positions was calculated on the experimental casts, in terms of interimplant distances in the x, y, and z-axes, using a coordinate measuring machine; values were compared with those measured on the reference model. Data were analyzed using non-parametrical Kruskal-Wallis and Mann-Whitney tests at α = .05. The differences between the two impression materials, VPES and PE, regardless of splinting type, were not statistically significant (P>.05). Non-splinting and splinting groups were also not significantly different for both PE and VPES (P>.05). The accuracy of VPES impression material seemed comparable with PE for multi-implant abutment-level impressions. Splinting had no effect on the accuracy of implant impressions. © 2018 John Wiley & Sons Australia, Ltd.

Giving the wrong impression: food and beverage brand impressions delivered to youth through popular movies

Science.gov (United States)

Skatrud-Mickelson, Monica; Adachi-Mejia, Anna M.; MacKenzie, Todd A.; Sutherland, Lisa A.

2012-01-01

Background Marketing on television showcases less-healthful options, with emerging research suggesting movies promote similar products. Given the obesity epidemic, understanding advertising to youth should be a public health imperative. The objective of this study was to estimate youth impressions to food and beverages delivered through movies. Methods Impressions were calculated by dividing US receipts annually into average movie ticket prices, then multiplying this by the number of brand appearances. Examination by ratings, product types and ages were conducted by Spearman rank correlation coefficient tests. Results Youth in the USA saw over 3 billion food, beverage or food–retail establishment (FRE) impressions on average, annually from 1996 to 2005. Those aged 12–18 viewed over half of all impressions, with PG-13-rated movies containing 61.5% of impressions. There were no significant trends in brand appearances by food, beverage or FRE impressions over the decade, although there was a decreasing trend in R-rated impressions for both foods (P< 0.01) and beverages (P< 0.01), but not FREs (P= 0.08). Conclusions Movies promote billions of food and beverage impressions annually to youth. Given the public health crisis of obesity, future research should further investigate these trends, as well as the potential association of these unhealthy exposures in youth. PMID:22076600

Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

Science.gov (United States)

Yang, Xin; Lv, Pin; Liu, Yihong; Si, Wenjie; Feng, Hailan

2015-01-01

In this study, the accuracy (precision and trueness) of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1) To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D) comparison. Root mean square (RMS) and color-coded difference images were offered. (2) To assess trueness, micro computed tomography (micro-CT) was used to get the reference model (REF). Deviations between REF and repeated scan models (from (1)) were calculated. (3) To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing. PMID:28793417

Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

Directory of Open Access Journals (Sweden)

Xin Yang

2015-06-01

Full Text Available In this study, the accuracy (precision and trueness of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1 To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D comparison. Root mean square (RMS and color-coded difference images were offered. (2 To assess trueness, micro computed tomography (micro-CT was used to get the reference model (REF. Deviations between REF and repeated scan models (from (1 were calculated. (3 To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing.

Substance Use as Impression Management.

Science.gov (United States)

Sharp, Mark J.; Getz, J. Greg

1996-01-01

Examines the function of substance use as an impression management tactic. Introductory psychology students (n=377) responded to a survey instrument measuring self-monitoring, perceived success in impression management, interaction anxiety, and self-esteem. Results suggest that alcohol use may serve an impression management function. (JPS)

Transcranial direct current stimulation on primary sensorimotor area has no effect in patients with drug-naïve restless legs syndrome: a proof-of-concept clinical trial.

Science.gov (United States)

Koo, Yong Seo; Kim, Sung Min; Lee, Chany; Lee, Byeong Uk; Moon, Ye Ji; Cho, Yong Won; Im, Chang-Hwan; Choi, Jeong Woo; Kim, Kyung Hwan; Jung, Ki-Young

2015-02-01

To evaluate the efficacy of transcranial direct current stimulation (tDCS) in people with drug-naïve restless legs syndrome (RLS). A two-week, double-blind, randomized, sham-controlled trial was performed. Thirty-three females with RLS were recruited. Participants received five sessions of tDCS using cathodal, anodal or sham stimulation. They were assessed at baseline (T0), three days (T1) and 13 days (T2) after the end of tDCS. Primary outcomes included the International RLS Group Rating Scale (IRLS) and the Clinical Global Impressions-Improvement (CGI-I). Secondary outcomes included the Patient Global Impression scale, the Pittsburgh Sleep Quality Index, the Medical Outcome Study sleep subscales, and the Beck Depression Inventory. Objective neurophysiological changes were assessed using event-related desynchronization/synchronization (ERD/ERS) of electroencephalography. The changes in the IRLS scores, as well as the responder rate in the CGI-I scale, did not differ significantly among the groups. There was also no significant difference in any of the secondary outcome measures and ERD/ERS among the groups. Transcranial direct current stimulation with electrodes on the sensorimotor areas showed no significant effect in people with drug-naïve RLS. Copyright © 2014 Elsevier B.V. All rights reserved.

Dimensional Accuracy of Hydrophilic and Hydrophobic VPS Impression Materials Using Different Impression Techniques - An Invitro Study

Science.gov (United States)

Pilla, Ajai; Pathipaka, Suman

2016-01-01

Introduction The dimensional stability of the impression material could have an influence on the accuracy of the final restoration. Vinyl Polysiloxane Impression materials (VPS) are most frequently used as the impression material in fixed prosthodontics. As VPS is hydrophobic when it is poured with gypsum products, manufacturers added intrinsic surfactants and marketed as hydrophilic VPS. These hydrophilic VPS have shown increased wettability with gypsum slurries. VPS are available in different viscosities ranging from very low to very high for usage under different impression techniques. Aim To compare the dimensional accuracy of hydrophilic VPS and hydrophobic VPS using monophase, one step and two step putty wash impression techniques. Materials and Methods To test the dimensional accuracy of the impression materials a stainless steel die was fabricated as prescribed by ADA specification no. 19 for elastomeric impression materials. A total of 60 impressions were made. The materials were divided into two groups, Group1 hydrophilic VPS (Aquasil) and Group 2 hydrophobic VPS (Variotime). These were further divided into three subgroups A, B, C for monophase, one-step and two-step putty wash technique with 10 samples in each subgroup. The dimensional accuracy of the impressions was evaluated after 24 hours using vertical profile projector with lens magnification range of 20X-125X illumination. The study was analyzed through one-way ANOVA, post-hoc Tukey HSD test and unpaired t-test for mean comparison between groups. Results Results showed that the three different impression techniques (monophase, 1-step, 2-step putty wash techniques) did cause significant change in dimensional accuracy between hydrophilic VPS and hydrophobic VPS impression materials. One-way ANOVA disclosed, mean dimensional change and SD for hydrophilic VPS varied between 0.56% and 0.16%, which were low, suggesting hydrophilic VPS was satisfactory with all three impression techniques. However, mean

CGI delay compensation. [Computer Generated Image

Science.gov (United States)

Mcfarland, R. E.

1986-01-01

Computer-generated graphics in real-time helicopter simulation produces objectionable scene-presentation time delays. In the flight simulation laboratory at Ames Research Center, it has been determined that these delays have an adverse influence on pilot performance during agressive tasks such as nap of the earth (NOE) maneuvers. Using contemporary equipment, computer generated image (CGI) time delays are an unavoidable consequence of the operations required for scene generation. However, providing that magnitude distortions at higher frequencies are tolerable, delay compensation is possible over a restricted frequency range. This range, assumed to have an upper limit of perhaps 10 or 15 rad/sec, conforms approximately to the bandwidth associated with helicopter handling qualities research. A compensation algorithm is introduced here and evaluated in terms of tradeoffs in frequency responses. The algorithm has a discrete basis and accommodates both a large, constant transport delay interval and a periodic delay interval, as associated with asynchronous operations.

Effects of implant system, impression technique, and impression material on accuracy of the working cast.

Science.gov (United States)

Wegner, Kerstin; Weskott, Katharina; Zenginel, Martha; Rehmann, Peter; Wöstmann, Bernd

2013-01-01

This in vitro study aimed to identify the effects of the implant system, impression technique, and impression material on the transfer accuracy of implant impressions. The null hypothesis tested was that, in vitro and within the parameters of the experiment, the spatial relationship of a working cast to the placement of implants is not related to (1) the implant system, (2) the impression technique, or (3) the impression material. A steel maxilla was used as a reference model. Six implants of two different implant systems (Standard Plus, Straumann; Semados, Bego) were fixed in the reference model. The target variables were: three-dimensional (3D) shift in all directions, implant axis direction, and rotation. The target variables were assessed using a 3D coordinate measuring machine, and the respective deviations of the plaster models from the nominal values of the reference model were calculated. Two different impression techniques (reposition/pickup) and four impression materials (Aquasil Ultra, Flexitime, Impregum Penta, P2 Magnum 360) were investigated. In all, 80 implant impressions for each implant system were taken. Statistical analysis was performed using multivariate analysis of variance. The implant system significantly influenced the transfer accuracy for most spatial dimensions, including the overall 3D shift and implant axis direction. There was no significant difference between the two implant systems with regard to rotation. Multivariate analysis of variance showed a significant effect on transfer accuracy only for the implant system. Within the limits of the present study, it can be concluded that the transfer accuracy of the intraoral implant position on the working cast is far more dependent on the implant system than on the selection of a specific impression technique or material.

The quality of fixed prosthodontic impressions: An assessment of crown and bridge impressions received at commercial laboratories.

Science.gov (United States)

Rau, Clayton T; Olafsson, Vilhelm G; Delgado, Alex J; Ritter, André V; Donovan, Terry E

2017-09-01

The authors evaluated and quantified clinically detectable errors commonly seen in impressions sent to commercial laboratories and determined possible relationships between finish line errors and other factors involved. The authors visited 3 large and 1 small commercial dental laboratories over a 12-month period. Three calibrated examiners evaluated the impressions. The examiners evaluated all impressions for errors by using ×2.5 magnification loupes under ambient room lighting without the aid of additional illumination. The authors evaluated 1,157 impressions; 86% of the examined impressions had at least 1 detectable error, and 55% of the noted errors were critical errors pertaining to the finish line. The largest single error categories evaluated were tissue over the finish line (49.09%), lack of unprepared stops in dual-arch impressions (25.63%), pressure of the tray on the soft tissue (25.06%), and void at the finish line (24.38%). The factors blood on the impression (odds ratio, 2.31; P impressions evaluated. The authors noted an increase in errors at the finish line with dual-arch impression techniques and in the presence of blood. Dentists have ethical, moral, and legal obligations bestowed on them by the profession and need to evaluate critically the work they send to laboratories. The authors strongly recommend an improvement in technique and reviewing of all impressions and working casts. Published by Elsevier Inc.

Patients' preferences when comparing analogue implant impressions using a polyether impression material versus digital impressions (Intraoral Scan) of dental implants.

Science.gov (United States)

Wismeijer, Daniel; Mans, Ronny; van Genuchten, Michiel; Reijers, Hajo A

2014-10-01

The primary objective of this clinical study was to assess the patients' perception of the difference between an analogue impression approach on the one hand and an intra-oral scan (IO scan) on the other when restoring implants in the non-aesthetic zone. A second objective was to analyse the difference in time needed to perform these two procedures. Thirty consecutive patients who had received 41 implants (Straumann tissue level) in the non-aesthetic zone in an implant-based referral practice setting in the Netherlands. As they were to receive crown and or bridge work on the implants, in one session, the final impressions were taken with both an analogue technique and with an intraoral scan. Patients were also asked if, directly after the treatment was carried out, they would be prepared to fill out a questionnaire on their perception of both techniques. The time involved following these two procedures was also recorded. The preparatory activities of the treatment, the taste of the impression material and the overall preference of the patients were significantly in favour of the IO scan. The bite registration, the scan head and gag reflex positively tended to the IO scan, but none of these effects were significant. The overall time involved with the IO scan was more negatively perceived than the analogue impression. Overall less time was involved when following the analogue impression technique than with the IO scan. The overall preference of the patients in our sample is significantly in favour of the approach using the IO scan. This preference relates mainly to the differences between the compared approaches with respect to taste effects and their preparatory activities. The patients did perceive the duration of IO scan more negatively than the analogue impression approach. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Ventral impressions on the hypopharynx

International Nuclear Information System (INIS)

Daschner, H.; Hannig, C.

1991-01-01

Two impressions can be seen on the ventral aspect of the hypopharynx and upper oesophagus; on static images it is difficult to differentiate these from small tumours. In order to evaluate this region more accurately, we have examined 150 patients by means of rapid rate cinematography. In 52.6% we found a constant irregular or convex impression formed by the cricoid; in the other cases this was not seen or was quite minimal. In 93% a sub-cricoid impression could be demonstrated which was due to lax mucosa. Characteristically this showed a variable appearance during the passage of a bolus. Only the cricoid impression was associated with dysphagia. (orig.) [de

The Historical Evolution of Dental Impression Materials.

Science.gov (United States)

Papadiochos, Ioannis; Papadiochou, Sofia; Emmanouil, Ioannis

The concept of impression making process in dentistry began in the mid 1800s. Dentists realized that the construction of a prosthetic restoration required both a detailed capture of the oral tissues along with stone cast fabrications. To accomplish these goals, impression materials were essential. Beeswax represents the first impression material, while important bechmarks during the historical evolution of dental impression materials are considered to be the introduction of dental trays in the early 1800s and the invention of the gutta-percha, thermoplastic resins and plaster of Paris. The double (corrective) impression technique, along with the functional impression concept that was established after mid 1800s, are also identified as pivotal innovations. During the 20th century, the advances in material development slowed significantly since the majority of the current impression materials had already been invented. However, the introduction of elastomeric impression materials in the field of prosthodontics that offered the advantages of accuracy and dimensional stability substantially upgraded both the impression accuracy and the quality of the final restoration. Presently, the dental practitioner has access to a variety of impression materials and should be aware of their properties, indications and limitations as well. Futhermore, while continuous attempts are being made to enhance these materials, the ideal impression material has yet to be developed. The purpose of this article was to provide a comprehensive review about the historical development of impression dental materials. Copyright American Academy of the History of Dentistry.

Accounting Narratives and Impression Management

OpenAIRE

Brennan, Niamh; Merkl-Davies, Doris M.

2013-01-01

This chapter focuses on impression management in accounting communication. Impression management entails the construction of an impression by organisations with the intention to appeal to their audiences, including shareholders, stakeholders, the general public, and the media. If successful, it undermines the quality of financial reporting and capital misallocations may result. What is more, wider social and political consequences include unwarranted support by non-financial...

Detecting a clinically meaningful change in tic severity in Tourette syndrome: a comparison of three methods.

Science.gov (United States)

Jeon, Sangchoon; Walkup, John T; Woods, Douglas W; Peterson, Alan; Piacentini, John; Wilhelm, Sabine; Katsovich, Lily; McGuire, Joseph F; Dziura, James; Scahill, Lawrence

2013-11-01

To compare three statistical strategies for classifying positive treatment response based on a dimensional measure (Yale Global Tic Severity Scale [YGTSS]) and a categorical measure (Clinical Global Impression-Improvement [CGI-I] scale). Subjects (N=232; 69.4% male; ages 9-69years) with Tourette syndrome or chronic tic disorder participated in one of two 10-week, randomized controlled trials comparing behavioral treatment to supportive therapy. The YGTSS and CGI-I were rated by clinicians blind to treatment assignment. We examined the percent reduction in the YGTSS-Total Tic Score (TTS) against Much Improved or Very Much Improved on the CGI-I, computed a signal detection analysis (SDA) and built a mixture model to classify dimensional response based on the change in the YGTSS-TTS. A 25% decrease on the YGTSS-TTS predicted positive response on the CGI-I during the trial. The SDA showed that a 25% reduction in the YGTSS-TTS provided optimal sensitivity (87%) and specificity (84%) for predicting positive response. Using a mixture model without consideration of the CGI-I, the dimensional response was defined by 23% (or greater) reduction on the YGTSS-TTS. The odds ratio (OR) of positive response (OR=5.68, 95% CI=[2.99, 10.78]) on the CGI-I for behavioral intervention was greater than the dimensional response (OR=2.86, 95% CI=[1.65, 4.99]). A 25% reduction on the YGTSS-TTS is highly predictive of positive response by all three analytic methods. For trained raters, however, tic severity alone does not drive the classification of positive response. Clinicaltrials.gov identifiers: NCT00218777; NCT00231985. © 2013.

WFIRST CGI Adjutant Scientist

Science.gov (United States)

Kasdin, N.

One of the most exciting developments in exoplanet science is the inclusion of a coronagraph instrument on WFIRST. After more than 20 years of research and development on coronagraphy and wavefront control, the technology is ready for a demonstration in space and to be used for revolutionary science. Good progress has already been made at JPL and partner institutions on the coronagraph technology and instrument design and test. The next five years as we enter Phase A will be critical for raising the TRL of the coronagraph to the needed level for flight and for converging on a design that is robust, low risk, and meets the science requirements. In addition, there is growing excitement over the possibility of rendezvousing an occulter with WFIRST/AFTA as a separate mission; this would both demonstrate that important technology and potentially dramatically enhance the science reach, introducing the possibility of imaging Earth-like planets in the habitable zone of nearby stars. In this proposal I will be applying for the Coronagraph Adjutant Scientist (CAS) position. I bring to the position the background and skills needed to be an effective liaison between the project office, the instrument team, and the Science Investigation Team (SIT). My background in systems engineering before coming to Princeton (I was Chief Systems Engineer for the Gravity Probe-B mission) and my 15 years of working closely with NASA on both coronagraph and occulter technology make me well-suited to the role. I have been a lead coronagraph scientist for the WFIRST mission from the beginning, including as a member of the SDT. Together with JPL and NASA HQ, I helped organize the process for selecting the coronagraphs for the CGI, one of which, the shaped pupil, has been developed in my lab. All of the key algorithms for wavefront control (including EFC and Stroke Minimization) were originally developed by students or post-docs in my lab at Princeton. I am thus in a unique position to work with

21 CFR 872.6880 - Preformed impression tray.

Science.gov (United States)

2010-04-01

...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6880 Preformed impression tray. (a) Identification. A preformed impression tray is a metal or plastic device intended to hold impression material... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed impression tray. 872.6880 Section 872...

How good are our impressions? An audit of alginate impression quality in the production of removable prostheses.

Science.gov (United States)

Horwitz, Richard

2014-05-01

Impressions are taken regularly in practice giving vital information to the dental laboratory, but are there quality assurance systems in place to make sure that they are up to a sufficient standard? As dental professionals we have to appreciate that dental technicians can only work with the information given to them. This makes the skill of taking a good impression vital in order for us as clinicians to provide prostheses of good quality. This paper outlines an audit of alginate impressions and their quality in the making of removable prostheses. To record the quality of impression taking, and how one's own ability to critique an impression may differ from that of our colleagues.

Sulcus depth reproduction with polyvinyl siloxane impression material: effects of hydrophilicity and impression temperature.

Science.gov (United States)

Takahashi, Hidekazu; Finger, Werner J; Kurokawa, Rie; Furukawa, Masae; Komatsu, Masashi

2010-03-01

To determine the sulcus penetration ability of hydrophilic and hydrophobic polyvinyl siloxane (PVS) impression materials by impression technique, temperature, and sulcus width. Hydrophilic Flexitime (FLE; Heraeus Kulzer) and its hydrophobic counterpart (EXP) without surfactant were investigated, using light (L), monophase (M), and heavy (H) consistencies. A truncated steel cone surrounded by a 2-mm-deep and 50-, 100-, or 200-microm-wide sulcus, simulating the gingival tissue with agar, served as the test model. Impressions were made with single-mix (L or M) and double-mix (LM or LH) techniques at 23 degrees C and 37 degrees C, respectively. The reproduced sulcus heights were measured with a 3D laser scanner. Data were analyzed by ANOVA and Tukey HSD (P 1.9 mm); FLE-M, -LM, and-LH reproductions were shorter with narrow sulci. Reproductions of 50- and 100-microm sulci with EXP-L were shallower than with FLE-L. The shortest reproduction was, however, greater than 1.6 mm. In spite of some significant differences found in sulcus-reproducing ability with hydrophilic and hydrophobic impression materials applied at different impression-making temperatures and with different techniques, the practical relevance is limited.

21 CFR 872.3660 - Impression material.

Science.gov (United States)

2010-04-01

...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3660 Impression material. (a) Identification. Impression material is a device composed of materials such as alginate or polysulfide intended to be placed... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Impression material. 872.3660 Section 872.3660...

21 CFR 872.6570 - Impression tube.

Science.gov (United States)

2010-04-01

... DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6570 Impression tube. (a) Identification. An impression tube is a device consisting of a hollow copper tube intended to take an impression of a single tooth...) Classification. Class I (general controls). The device is exempt from the premarket notification procedures in...

Validation of the Communication Skills Questionnaire (CSQ) in people with schizophrenia.

Science.gov (United States)

Prat, Gemma; Casas-Anguera, Emma; Garcia-Franco, Mar; Escandell, Maria José; Martin, José Ramón; Vilamala, Sonia; Villalta-Gil, Victoria; Gimenez-Salinas, Jordi; Hernández-Rambla, Carla; Ochoa, Susana

2014-12-15

This present study describes the validation of the Communication Skills Questionnaire (CSQ) in people with schizophrenia. A total of 125 clinically stable people in rehabilitation treatment who were diagnosed with schizophrenia were included. For convergent and discriminant validity the following tests were administered; the Gambrill and Richie (GR) Assertiveness Inventory, the Social Functioning Scale (SFS), Life Skills Profile (LSP), Clinical Global Impression scale for schizophrenia (CGI-S) and the Global Assessment of Functioning (GAF) scale. Internal consistency of the CSQ had a Cronbach׳s alpha of 0.96. Test-retest reliability showed coefficients between 0.60 and 0.70. Convergent validity showed significant relations at p<0.0001 for all instruments assessed. None of the subscales used for assessing discriminant validity showed a significant correlation with the CSQ except for the CGI-S depression subscale. The instrument shows good psychometric properties and demonstrates that it is a useful instrument for evaluating communication skills in people with schizophrenia. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Psychopharmacotherapy of panic disorder: 8-week randomized trial with clonazepam and paroxetine

Directory of Open Access Journals (Sweden)

A.E. Nardi

2011-04-01

Full Text Available The objective of the present randomized, open-label, naturalistic 8-week study was to compare the efficacy and safety of treatment with clonazepam (N = 63 and paroxetine (N = 57 in patients with panic disorder with or without agoraphobia. Efficacy assessment included number of panic attacks and clinician ratings of the global severity of panic disorders with the clinical global impression (CGI improvement (CGI-I and CGI severity (CGI-S scales. Most patients were females (69.8 and 68.4% in the clonazepam and paroxetine groups, respectively and age (mean ± SD was 35.9 ± 9.6 years for the clonazepam group and 33.7 ± 8.8 years for the paroxetine group. Treatment with clonazepam versus paroxetine resulted in fewer weekly panic attacks at week 4 (0.1 vs 0.5, respectively; P < 0.01, and greater clinical improvements at week 8 (CGI-I: 1.6 vs 2.9; P = 0.04. Anxiety severity was significantly reduced with clonazepam versus paroxetine at weeks 1 and 2, with no difference in panic disorder severity. Patients treated with clonazepam had fewer adverse events than patients treated with paroxetine (73 vs 95%; P = 0.001. The most common adverse events were drowsiness/fatigue (57%, memory/concentration difficulties (24%, and sexual dysfunction (11% in the clonazepam group and drowsiness/fatigue (81%, sexual dysfunction (70%, and nausea/vomiting (61% in the paroxetine group. This naturalistic study confirms the efficacy and tolerability of clonazepam and paroxetine in the acute treatment of patients with panic disorder.

Two-piece impression procedure for implant-retained orbital prostheses.

Science.gov (United States)

Ozcelik, Tuncer Burak; Yilmaz, Burak

2012-01-01

Obtaining an accurate impression of facial tissues with undercuts and extraoral implants has always been a challenge for both clinicians and patients. This report describes a three-step, two-piece technique that enables an accurate and comfortable impression of undercut tissues and extraoral implants in an orbital defect. An impression of the basal tissue surface of the defect area was made using a medium-body polyether impression material followed by an impression of the entire face of the patient made with a polyvinyl siloxane (PVS) impression material. First, the PVS impression material was removed; second, the impression posts were removed from the magnets; and third, the polyether impression was removed from the defect. The impression posts were attached to the implant analogs and placed in the negative spaces in the polyether impression. The polyether impression, which carries the implant analogs and impression posts, was placed in the PVS impression through the negative spaces. This technique minimizes trauma to the soft tissues and implants during impression making and also does not require additional materials.

Digital Versus Conventional Impressions in Fixed Prosthodontics: A Review.

Science.gov (United States)

Ahlholm, Pekka; Sipilä, Kirsi; Vallittu, Pekka; Jakonen, Minna; Kotiranta, Ulla

2018-01-01

To conduct a systematic review to evaluate the evidence of possible benefits and accuracy of digital impression techniques vs. conventional impression techniques. Reports of digital impression techniques versus conventional impression techniques were systematically searched for in the following databases: Cochrane Central Register of Controlled Trials, PubMed, and Web of Science. A combination of controlled vocabulary, free-text words, and well-defined inclusion and exclusion criteria guided the search. Digital impression accuracy is at the same level as conventional impression methods in fabrication of crowns and short fixed dental prostheses (FDPs). For fabrication of implant-supported crowns and FDPs, digital impression accuracy is clinically acceptable. In full-arch impressions, conventional impression methods resulted in better accuracy compared to digital impressions. Digital impression techniques are a clinically acceptable alternative to conventional impression methods in fabrication of crowns and short FDPs. For fabrication of implant-supported crowns and FDPs, digital impression systems also result in clinically acceptable fit. Digital impression techniques are faster and can shorten the operation time. Based on this study, the conventional impression technique is still recommended for full-arch impressions. © 2016 by the American College of Prosthodontists.

Minimal clinically important difference on the Motor Examination part of MDS-UPDRS.

Science.gov (United States)

Horváth, Krisztina; Aschermann, Zsuzsanna; Ács, Péter; Deli, Gabriella; Janszky, József; Komoly, Sámuel; Balázs, Éva; Takács, Katalin; Karádi, Kázmér; Kovács, Norbert

2015-12-01

Recent studies increasingly utilize the Movement Disorders Society Sponsored Unified Parkinson's Disease Rating Scale (MDS-UPDRS). However, the minimal clinically important difference (MCID) has not been fully established for MDS-UPDRS yet. To assess the MCID thresholds for MDS-UPDRS Motor Examination (Part III). 728 paired investigations of 260 patients were included. At each visit both MDS-UPDRS and Clinician-reported Global Impression-Improvement (CGI-I) scales were assessed. MDS-UPDRS Motor Examination (ME) score changes associated with CGI-I score 4 (no change) were compared with MDS-UPDRS ME score changes associated with CGI-I score 3 (minimal improvement) and CGI-I score 5 (minimal worsening). Both anchor- and distribution-based techniques were utilized to determine the magnitude of MCID. The MCID estimates for MDS-UPDRS ME were asymmetric: -3.25 points for detecting minimal, but clinically pertinent, improvement and 4.63 points for observing minimal, but clinically pertinent, worsening. MCID is the smallest change of scores that are clinically meaningful to patients. These MCID estimates may allow the judgement of a numeric change in MDS-UPDRS ME on its clinical importance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Disinfection of dental impressions - compliance to accepted standards.

Science.gov (United States)

Almortadi, N; Chadwick, R G

2010-12-18

The responsibility of ensuring impressions have been cleaned and disinfected before dispatch to the dental laboratory lies solely with the dentist. Uncertainty of impression disinfection risks both the health of the receiving dental technician and potential repeat disinfection of an already disinfected impression with detrimental consequences for its dimensions. To ascertain, from the perspectives of dentists and dental technicians, current impression decontamination and disinfection practices with, in the case of the technicians, an estimate of the relative prevalence of contaminated voids within apparently disinfected impressions. Anonymous postal questionnaire. Dentist (n = 200) and dental technician (n = 200) potential participants, selected at random from the registers held by the General Dental Council, were invited to complete an anonymous postal questionnaire that sought to establish current practices and perceived effectiveness of impression disinfection. Questionnaire return rates of 42.1% and 31.2% were recorded for dentists and dental technicians respectively. A wide range of solutions, at different dilutions of the same product, was used by the dentists to disinfect dental impressions. 37.2% rinsed the impressions with water, and 2.6% always brushed debris away, before disinfection. 24.7% of dentists did not inform the laboratory of disinfection. Irrespective of the disinfection status of the received impressions, 50% of the responding dental technicians disinfected all impressions. 95% of them had received blood-contaminated impressions. 15% had encountered blood-filled voids upon trimming back the peripheries of impressions. 64.7% were confident that the impressions received by them had been disinfected by the dentists. Compliance with good practice is less than ideal and education in impression disinfection for both dentists and dental technicians is required to address this.

Impression management as symbolic capital

DEFF Research Database (Denmark)

Lueg, Klarissa; Nielsen, Camilla

2015-01-01

in Germany and LinkedIn in Denmark. We summarize those differences and relate them to different cultural contexts and impression management practices. Our sample consists of Danish Higher Executives (HEs)/managers (e.g., CEOs) and companies that have profiles on both SNS, thus reaching out to both the German......Social Network Sites (SNS) play an increasingly important role in the European business world, especially with respect to cross-cultural impression management. Departing from the Bourdieusian concept of “capital,” this paper analyzes the differences in the use of two popular business SNS: XING...... and the Danish markets. It is apparent that even business experts operating in both markets could better adapt to the standards and possibilities offered by the German SNS with respect to impression management. We introduce a set of recommendations to foster SNS-related and culture-sensitive impression...

Impression Management and Entrepreneurial Experience

DEFF Research Database (Denmark)

Halbinger, Maria; Reichstein, Toke

2016-01-01

into entrepreneurship. Analyzing individual-level data collected through online survey, field studies and experiments in hacker-and makerspaces, we find that impression management behavior that focuses others, i.e. accommodative impression management is positively associated with entrepreneurial experience while self...

Evaluation of accuracy of complete-arch multiple-unit abutment-level dental implant impressions using different impression and splinting materials.

Science.gov (United States)

Buzayan, Muaiyed; Baig, Mirza Rustum; Yunus, Norsiah

2013-01-01

This in vitro study evaluated the accuracy of multiple-unit dental implant casts obtained from splinted or nonsplinted direct impression techniques using various splinting materials by comparing the casts to the reference models. The effect of two different impression materials on the accuracy of the implant casts was also evaluated for abutment-level impressions. A reference model with six internal-connection implant replicas placed in the completely edentulous mandibular arch and connected to multi-base abutments was fabricated from heat-curing acrylic resin. Forty impressions of the reference model were made, 20 each with polyether (PE) and polyvinylsiloxane (PVS) impression materials using the open tray technique. The PE and PVS groups were further subdivided into four subgroups of five each on the bases of splinting type: no splinting, bite registration PE, bite registration addition silicone, or autopolymerizing acrylic resin. The positional accuracy of the implant replica heads was measured on the poured casts using a coordinate measuring machine to assess linear differences in interimplant distances in all three axes. The collected data (linear and three-dimensional [3D] displacement values) were compared with the measurements calculated on the reference resin model and analyzed with nonparametric tests (Kruskal-Wallis and Mann-Whitney). No significant differences were found between the various splinting groups for both PE and PVS impression materials in terms of linear and 3D distortions. However, small but significant differences were found between the two impression materials (PVS, 91 μm; PE, 103 μm) in terms of 3D discrepancies, irrespective of the splinting technique employed. Casts obtained from both impression materials exhibited differences from the reference model. The impression material influenced impression inaccuracy more than the splinting material for multiple-unit abutment-level impressions.

CGI: Java software for mapping and visualizing data from array-based comparative genomic hybridization and expression profiling.

Science.gov (United States)

Gu, Joyce Xiuweu-Xu; Wei, Michael Yang; Rao, Pulivarthi H; Lau, Ching C; Behl, Sanjiv; Man, Tsz-Kwong

2007-10-06

With the increasing application of various genomic technologies in biomedical research, there is a need to integrate these data to correlate candidate genes/regions that are identified by different genomic platforms. Although there are tools that can analyze data from individual platforms, essential software for integration of genomic data is still lacking. Here, we present a novel Java-based program called CGI (Cytogenetics-Genomics Integrator) that matches the BAC clones from array-based comparative genomic hybridization (aCGH) to genes from RNA expression profiling datasets. The matching is computed via a fast, backend MySQL database containing UCSC Genome Browser annotations. This program also provides an easy-to-use graphical user interface for visualizing and summarizing the correlation of DNA copy number changes and RNA expression patterns from a set of experiments. In addition, CGI uses a Java applet to display the copy number values of a specific BAC clone in aCGH experiments side by side with the expression levels of genes that are mapped back to that BAC clone from the microarray experiments. The CGI program is built on top of extensible, reusable graphic components specifically designed for biologists. It is cross-platform compatible and the source code is freely available under the General Public License.

CGI: Java Software for Mapping and Visualizing Data from Array-based Comparative Genomic Hybridization and Expression Profiling

Directory of Open Access Journals (Sweden)

Joyce Xiuweu-Xu Gu

2007-01-01

Full Text Available With the increasing application of various genomic technologies in biomedical research, there is a need to integrate these data to correlate candidate genes/regions that are identified by different genomic platforms. Although there are tools that can analyze data from individual platforms, essential software for integration of genomic data is still lacking. Here, we present a novel Java-based program called CGI (Cytogenetics-Genomics Integrator that matches the BAC clones from array-based comparative genomic hybridization (aCGH to genes from RNA expression profiling datasets. The matching is computed via a fast, backend MySQL database containing UCSC Genome Browser annotations. This program also provides an easy-to-use graphical user interface for visualizing and summarizing the correlation of DNA copy number changes and RNA expression patterns from a set of experiments. In addition, CGI uses a Java applet to display the copy number values of a specifi c BAC clone in aCGH experiments side by side with the expression levels of genes that are mapped back to that BAC clone from the microarray experiments. The CGI program is built on top of extensible, reusable graphic components specifically designed for biologists. It is cross-platform compatible and the source code is freely available under the General Public License.

Quetiapine monotherapy in adolescents with bipolar disorder comorbid with conduct disorder.

Science.gov (United States)

Masi, Gabriele; Pisano, Simone; Pfanner, Chiara; Milone, Annarita; Manfredi, Azzurra

2013-10-01

Bipolar Disorders (BD) are often comorbid with disruptive behaviour disorders (DBDs) (oppositional-defiant disorder or conduct disorder), with negative implications on treatment strategy and outcome. The aim of this study was to assess the efficacy of quetiapine monotherapy in adolescents with BD comorbid with conduct disorder (CD). A consecutive series of 40 adolescents (24 males and 16 females, age range 12-18 years, mean age 14.9 ± 2.0 years), diagnosed with a clinical interview (Kiddie Schedule for Affective Disorders and Schizophrenia for School-Aged Children-Present and Lifetime Version [K-SADS-PL]) according to American Psychiatric Association, Diagnostic and Statistical Manual of Mental Disorders, 4th ed., Text Revision (DSM-IV-TR) criteria were included. All the patients were treated with quetiapine monotherapy (mean final dose 258 ± 124 mg/day, range 100-600 mg/day). At the end-point (3 months), 22 patients (55.0%) were responders (Clinical Global Impressions-Improvement [CGI-I] score of 1 or 2 and CGI-Severity [CGI-S] ≤ 3 and improvement of at least 30% Children's Global Assessment Scale [C-GAS] during 3 consecutive months). Both CGI-S and C-GAS significantly improved (pdisorder (ADHD) comorbidity. Eight patients (20.0%) experienced moderate to severe sedation and eight (20.0%) experienced increased appetite and weight gain. In these severely impaired adolescents, quetiapine monotherapy was well tolerated and effective in>50% of the patients.

Impressed by impression management: Newcomer reactions to ingratiated supervisors.

Science.gov (United States)

Foulk, Trevor A; Long, David M

2016-10-01

Organizational newcomers are unfamiliar with many aspects of their workplace and look for information to help them reduce uncertainty and better understand their new environment. One aspect critical to newcomers is the disposition of their supervisor-the person who arguably can impact the newcomer's career the most. To form an impression of their new supervisor, newcomers look to social cues from coworkers who have interpersonal contact with the supervisor. In the present research, we investigate the ways newcomers use observed ingratiation-a common impression management strategy whereby coworkers try to appear likable (Schlenker, 1980)-to form impressions of a supervisor's warmth. Research on social influence cannot easily account for how third parties will interpret ingratiation, as the behaviors linked to ingratiation suggest something positive about the target, yet the unsavory aspects of the behavior imply it may not have the same effects as other positive behaviors. Our findings suggest that newcomers are unique in that they are motivated to learn about their new supervisor, and are prone to ignore those unsavory aspects and infer something positive about a supervisor targeted with ingratiation. Our findings also suggest that this effect can be weakened based on the supervisor's response. In other words, newcomers rely less on evidence from a coworker's ingratiation in the presence of direct behaviors from the supervisor. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Effect of Storage Time and Temperature on Dimensional Stability of Impressions Made with Zinc Oxide Impression Paste

Directory of Open Access Journals (Sweden)

Sareh Habibzadeh

2016-10-01

Full Text Available Objectives: This study aimed to assess the effect of storage time and temperature on dimensional stability of impressions made with Cavex Outline zinc oxide impression paste.Materials and Methods: A round stainless steel mold with five grooves (three horizontal and two vertical was used in this in-vitro experimental study. Cavex Outline impression paste was prepared according to the manufacturer’s instructions and applied to the mold. The mold was placed on a block and stored at 35°C and 100% humidity for setting. The impressions were poured with stone immediately and also after 30, 120, 240 and 420 minutes and 24 hours. The distance between the vertical lines on the casts was measured and compared with that in the immediately poured cast.Results: Storage in a refrigerator and at room temperature for zero to seven hours had no significant effect on dimensional stability of the impressions; however, 24 hours of storage in a refrigerator or at room temperature decreased the dimensional stability of Cavex Outline (P=0.001. Also, a significant association was found between dimensional changes following 24 hours of storage in a refrigerator (4°C and at room temperature (23°C; P<0.01.Conclusions: The optimal pouring time of Cavex Outline impressions with stone is between zero to seven hours, and 24 hours of storage significantly decreases the dimensional stability.Keywords: Dental Impression Materials; Zinc Oxide; Cavex

Preliminary impression techniques for microstomia patients

Directory of Open Access Journals (Sweden)

K Aswini Kumar

2016-01-01

Full Text Available The Prosthetic rehabilitation of microstomia patients presents difficulties at all the stages. The difficulty starts with the preliminary impression making. This is due to the tongue rigidity and the decreased oral opening. A maximum oral opening which is smaller than the size of the tray can make prosthetic treatment challenging. Due to the restricted mouth opening, insertion and removal of the impression trays is extremely cumbersome and various modifications of the trays have been used in the past. Among these are the flexible trays and the sectional trays used with different modes of reassembling the segments extra orally after the impression is made. This article reviews the literature published from 1971 to 2015 concerning preliminary impression techniques used in making impressions for patients with microstomia based on various tray designs. An electronic search was performed across three databases (PubMed, Science Direct and Google Scolar for relevant citations. The keywords/combinations used for the search were microstomia, limited/constricted/restricted mouth opening/oral access, trismus, sectional trays, impressions and prosthetic/prosthodontic rehabilitation. The search was limited to papers written in English which resulted in a total of 45 related articles of which 17 articles were included for discussion of this review.

Impression mismanagement : People as inept self-presenters

NARCIS (Netherlands)

Steinmetz, J.F.; Sezer, O.; Sedikides, C.

2017-01-01

People routinely manage the impressions they make on others, attempting to project a favorable self-image. The bulk of the literature has portrayed people as savvy self-presenters who typically succeed at conveying a desired impression. When people fail at making a favorable impression, such as when

Effects of Impression Coping Design, Impression Technique, and Dental Undercuts on the Accuracy of Implant Impressions Assessed by 3-Dimensional Optical Scanning: An In Vitro Study.

Science.gov (United States)

Sabouhi, Mahmoud; Bajoghli, Farshad; Dakhilalian, Mansour; Beygi, Ali; Abolhasani, Majid

2016-04-01

The aim of this in vitro study was to evaluate the effect of the type and design of the impression copings on the accuracy of implant impressions in 2 different conditions. A reference model with 2 implants inserted in bilateral mandibular canines was fabricated. The posterior teeth were inserted as tilted to simulate intra-oral undercuts. The teeth were eliminated to create an edentulous condition. Three different impression techniques were performed (open high retentive [OH], open low retentive [OL], closed [C]) for each condition. Total of 48 casts were made. Two scan-bodies were secured on each cast, scanned by an optical scanner. Then, they were compared to the scan of the reference model, and the calculated mean errors were analyzed with a 2-way ANOVA and Tukey test. There was no significant difference between the complete and partially edentulous groups (F = 3.252, P = 0.079). There was significant difference between the different designs of the impression copings (F = 31.789, P impression copings was more important than the undercuts. The accuracy of the closed tray coping was greater than the low retentive coping and equal to the high retentive coping.

Rating scale for psychogenic nonepileptic seizures: scale development and clinimetric testing.

Science.gov (United States)

Cianci, Vittoria; Ferlazzo, Edoardo; Condino, Francesca; Mauvais, Hélène Somma; Farnarier, Guy; Labate, Angelo; Latella, Maria Adele; Gasparini, Sara; Branca, Damiano; Pucci, Franco; Vazzana, Francesco; Gambardella, Antonio; Aguglia, Umberto

2011-06-01

Our aim was to develop a clinimetric scale evaluating motor phenomena, associated features, and severity of psychogenic nonepileptic seizures (PNES). Sixty video/EEG-recorded PNES induced by suggestion maneuvers were evaluated. We examined the relationship between results from this scale and results from the Clinical Global Impression (CGI) scale to validate this technique. Interrater reliabilities of the PNES scale for three raters were analyzed using the AC1 statistic, Kendall's coefficient of concordance (KCC), and intraclass correlation coefficients (ICCs). The relationship between the CGI and PNES scales was evaluated with Spearman correlations. The AC1 statistic demonstrated good interrater reliability for each phenomenon analyzed (tremor/oscillation, tonic; clonic/jerking, hypermotor/agitation, atonic/akinetic, automatisms, associated features). KCC and the ICC showed moderate interrater agreement for phenomenology, associated phenomena, and total PNES scores. Spearman's correlation of mean CGI score with mean total PNES score was 0.69 (Pscale described here accurately evaluates the phenomenology of PNES and could be used to assess and compare subgroups of patients with PNES. Copyright © 2011 Elsevier Inc. All rights reserved.

Effects of impression levels and trays on the accuracy of impressions taken from angulated implants.

Science.gov (United States)

Geramipanah, Farideh; Sahebi, Majid; Davari, Maryam; Hajimahmoudi, Mohammadreza; Rakhshan, Vahid

2015-09-01

It is crucial to keep the misfit of the abutment-fixture unit at the lowest possible rate. There are a few controversial studies on the accuracy of impression making of angulated implants, and much fewer (and controversial) studies on the abutment-level impression technique, which is a convenient and clinically favorable method. Besides, there are no studies on comparison of sectional vs. full-arch trays. We aimed to assess these. A trapezoidal model with four angulated implants installed at 20° and 30° buccal tilts was fabricated. Forty impressions were taken from this model, with two groups of full-arch and sectional custom trays (n = 2 × 20), each divided into two subgroups of implant-level and abutment-level techniques (n = 2 × 2 × 10 in four subgroups). Absolute and non-absolute linear and angular impression errors were estimated by comparing the fabricated casts with the model, using a coordinate measuring machine. The effects of sectional/full-arch trays and abutment-level and fixture-level techniques on impression accuracies were analyzed using one- and two-way analyses of variance (ANOVA), Tukey, Mann-Whitney, and one-sample t-tests (α = 0.05, Mann-Whitney's α using the Bonferroni Bonferroni method). No significant differences between the absolute linear errors of the two trays (P = 0.100 [ANOVA]) and the two levels (P = 0.400 [ANOVA]) were observed. The assessment of absolute angular errors showed no significant differences (all P values ≥ 0.4 [ANOVA]). The difference between the linear errors in the full-arch vs. sectional trays was not significant in the fixture-level group (P = 0.290). However, in the abutment-level group, the linear error was significantly greater in the sectional tray compared to full-arch tray (P = 0.013, α = 0.025 [Mann-Whitney]). Using sectional trays might not be advantageous over full-arch trays. Sectional trays are not recommended for taking abutment-level impressions. The abutment

Multidimensional Patient Impression of Change Following Interdisciplinary Pain Management.

Science.gov (United States)

Gagnon, Christine M; Scholten, Paul; Atchison, James

2018-04-20

To assess patient impression of change following interdisciplinary pain management utilizing a newly developed Multidimensional Patient Impression of Change (MPIC) questionnaire. A heterogeneous group of chronic pain patients (N = 601) participated in an interdisciplinary treatment program. Programs included individual and group therapies (pain psychology, physical therapy, occupational therapy, relaxation training/biofeedback, aerobic conditioning, patient education and medical management). Patients completed measures of pain, mood, coping, physical functioning and pain acceptance both prior to and at completion of their treatment programs. The newly developed MPIC is an expansion to the Patient Global Impression of Change (PGIC) including seven additional domains (Pain, Mood, Sleep, Physical Functioning, Cope with Pain, Manage Pain Flare-ups, and Medication Effectiveness). The MPIC was administered to the patients post-treatment. There were statistically significant pre- to post-treatment improvements found on all outcome measures. The majority of these improvements were significantly correlated with all domains of the MPIC. The original PGIC item was significantly associated with all of the new MPIC domains and the domains were significantly associated with each other; but there were variations in the distribution of responses highlighting variation of perceived improvements among the domains. Our results support the use of the MPIC as a quick and easy post-treatment assessment screening tool. Future research is needed to examine relevant correlates to Medication Effectiveness. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

ATGL and CGI-58 are lipid droplet proteins of the hepatic stellate cell line HSC-T6.

Science.gov (United States)

Eichmann, Thomas O; Grumet, Lukas; Taschler, Ulrike; Hartler, Jürgen; Heier, Christoph; Woblistin, Aaron; Pajed, Laura; Kollroser, Manfred; Rechberger, Gerald; Thallinger, Gerhard G; Zechner, Rudolf; Haemmerle, Günter; Zimmermann, Robert; Lass, Achim

2015-10-01

Lipid droplets (LDs) of hepatic stellate cells (HSCs) contain large amounts of vitamin A [in the form of retinyl esters (REs)] as well as other neutral lipids such as TGs. During times of insufficient vitamin A availability, RE stores are mobilized to ensure a constant supply to the body. To date, little is known about the enzymes responsible for the hydrolysis of neutral lipid esters, in particular of REs, in HSCs. In this study, we aimed to identify LD-associated neutral lipid hydrolases by a proteomic approach using the rat stellate cell line HSC-T6. First, we loaded cells with retinol and FAs to promote lipid synthesis and deposition within LDs. Then, LDs were isolated and lipid composition and the LD proteome were analyzed. Among other proteins, we found perilipin 2, adipose TG lipase (ATGL), and comparative gene identification-58 (CGI-58), known and established LD proteins. Bioinformatic search of the LD proteome for α/β-hydrolase fold-containing proteins revealed no yet uncharacterized neutral lipid hydrolases. In in vitro activity assays, we show that rat (r)ATGL, coactivated by rat (r)CGI-58, efficiently hydrolyzes TGs and REs. These findings suggest that rATGL and rCGI-58 are LD-resident proteins in HSCs and participate in the mobilization of both REs and TGs. Copyright © 2015 by the American Society for Biochemistry and Molecular Biology, Inc.

Downplaying Positive Impressions: Compensation Between Warmth and Competence in Impression Management.

Science.gov (United States)

Holoien, Deborah Son; Fiske, Susan T

2013-01-01

The compensation effect demonstrates a negative relationship between the dimensions of warmth and competence in impression formation in comparative contexts. However, does compensation between warmth and competence extend to impression management? Two studies examined whether people actively downplay their warmth in order to appear competent and downplay their competence in order to appear warm. In Studies 1a and 1b, participants selected words pretested to be high or low in warmth and competence to include in an e-mail message to people they wanted to impress. As predicted, participants downplayed their competence when they wanted to appear warm (Study 1a) and downplayed their warmth when they wanted to appear competent (Study 1b). In Studies 2a and 2b, compensation also occurred when participants introduced themselves to another person, as evidenced by the questions they selected to answer about themselves, their self-reported goals, and their open-ended introductions. Compensation occurred uniquely between warmth and competence and not for other dimensions, such as healthiness (Study 2a) and political interest (Study 2b), which suggests that the compensation effect extends beyond a mere zero-sum exchange between dimensions.

Neural correlates of self-deception and impression-management.

Science.gov (United States)

Farrow, Tom F D; Burgess, Jenny; Wilkinson, Iain D; Hunter, Michael D

2015-01-01

Self-deception and impression-management comprise two types of deceptive, but generally socially acceptable behaviours, which are common in everyday life as well as being present in a number of psychiatric disorders. We sought to establish and dissociate the 'normal' brain substrates of self-deception and impression-management. Twenty healthy participants underwent fMRI scanning at 3T whilst completing the 'Balanced Inventory of Desirable Responding' test under two conditions: 'fake good', giving the most desirable impression possible and 'fake bad' giving an undesirable impression. Impression-management scores were more malleable to manipulation via 'faking' than self-deception scores. Response times to self-deception questions and 'fake bad' instructions were significantly longer than to impression-management questions and 'fake good' instructions respectively. Self-deception and impression-management manipulation and 'faking bad' were associated with activation of medial prefrontal cortex (mPFC) and left ventrolateral prefrontal cortex (vlPFC). Impression-management manipulation was additionally associated with activation of left dorsolateral prefrontal cortex and left posterior middle temporal gyrus. 'Faking bad' was additionally associated with activation of right vlPFC, left temporo-parietal junction and right cerebellum. There were no supra-threshold activations associated with 'faking good'. Our neuroimaging data suggest that manipulating self-deception and impression-management and more specifically 'faking bad' engages a common network comprising mPFC and left vlPFC. Shorter response times and lack of dissociable neural activations suggests that 'faking good', particularly when it comes to impression-management, may be our most practiced 'default' mode. Copyright © 2014 Elsevier Ltd. All rights reserved.

Trends in complete denture impressions in pakistan

International Nuclear Information System (INIS)

Vohra, F.; Rashid, H.; Hanif, A.

2015-01-01

Multiple materials and techniques have been reported for complete denture impressions in literature. The aim of the study was to assess the trends in complete denture impression materials and techniques among general dental practitioners (GDP) and specialists (SP) in Pakistan. Methods: In this cross-sectional study, self-designed-structured questionnaires were distributed among 500 dentists in Pakistan. The three-part questionnaire enquired about the demographic features, preferred impression materials, impression techniques and related procedures commonly used in their clinical practice. A comparison between the responses of SP and GDP was also drawn. Frequency distribution and Chi-square test were performed to compare the responses. Results: A total of 294 questionnaires were completed at a response rate of 58.8%. 75% of GDP used alginate for primary impressions and 66% of SP preferred impression compound for the same. A majority of both SP and GDP favoured the used of custom trays (SP 81%, GDP 85%) and selective pressure technique (SP 84%, GDP 53%) for final impression. However, 85% of GDP used zinc-oxide eugenol and 62% of SP favoured elastomeric materials for the same. Most of the SP and GDP used chemical cured resin custom trays (SP 54%, GDP 75%), however, 86% of SP used spaced trays and almost 60% of GDP preferred close-fitting trays. Conclusions: The practice of GDP and SP with regards to CD impression materials and techniques differed significantly. Continued education and training for GDP and SP with respect to procedures and techniques related to CD is recommended. (author)

Making a Great First Impression

Science.gov (United States)

Evenson, Renee

2007-01-01

Managers and business owners often base hiring decisions on first impressions. That is why it is so important to teach students to make a great first impression--before they go on that first job interview. Managers do not have unrealistic expectations, they just want to hire people who they believe can develop into valuable employees. A nice…

Schizophrenia symptoms and functioning in patients receiving long-term treatment with olanzapine long-acting injection formulation

DEFF Research Database (Denmark)

Peuskens, Joseph; Porsdal, Vibeke; Pecenak, Jan

2012-01-01

: At baseline, 434 (36.8%) patients had minimal Positive and Negative Syndrome Scale (PANSS) symptoms but seriously impaired Heinrich Carpenter's Quality of Life Scale (QLS) functioning; 303 (25.6%) had moderate to severe symptoms and seriously impaired function; 208 (17.6%) had mild to moderate symptoms...... but good functioning, and 162 (13.7%) had minimal symptoms and good functioning. Baseline category was significantly associated with Clinical Global Impression - Severity (CGI-S), extrapyramidal symptoms, working status, age, and number of previous episodes. The majority of all patients starting OLAI...... treatment maintained or improved (62% 6 months and 52% 12 months) their symptom and functioning levels on OLAI maintenance treatment. Less than 8% of the patients showed worsening of symptoms or functioning. An improvement in category was associated with high PANSS positive and low CGI-S scores at baseline...

The Bidimensional Impression Management Index (BIMI): measuring agentic and communal forms of impression management.

Science.gov (United States)

Blasberg, Sabrina A; Rogers, Katherine H; Paulhus, Delroy L

2014-01-01

Measures of impression management have yet to incorporate two-factor models of person perception. The 2 primary factors are often labeled agency and communion. In Study 1, we assembled a new measure of impression management—the Bidimensional Impression Management Index (BIMI): It comprises 2 subscales designed specifically to tap agentic and communal content. Both subscales showed adequate alpha reliabilities under both honest and faking conditions. In Study 2, the BIMI was cross-validated in a new sample: The subscales remained relatively independent, and their reliabilities remained solid. A coherent pattern of personality correlates also supported the validities of both subscales. In Study 3, the differential sensitivity of the 2 subscales was demonstrated by manipulating the job type in simulated job applications. Implications and applications of the BIMI are discussed.

Making a Good Impression at Work: National Differences in Employee Impression Management Behaviors in Japan, Korea, and the United States.

Science.gov (United States)

Krieg, Alexander; Ma, Li; Robinson, Patricia

2018-02-17

Impression management has important implications for success at work. This study explores differences in impression management in the East and West by examining the use of self-promotion, ingratiation, and exemplification directed towards three targets: supervisors, peers, and subordinates among 945 company employees from Japan, Korea, and the United States. Our results show that Korean employees used all three strategies most frequently, followed by United States, and then Japanese employees. Japanese and Korean employees used impression management strategies differentially across the three targets, and U.S. employees used impression management equally across targets. This elucidates how cultural trends in hierarchical relationships impact social behavior within the workplace. A follow-up mediation analysis found that relational or labor mobility fully mediated country differences in impression management, suggesting that culture is also reflected in larger social ecological trends in employee's ability and likelihood to change jobs, which also account for impression management strategy usage. Theoretical and practical implications for international business are discussed. This research may be useful in aligning strategies foreign employees might employ for using impression management when in Japan, Korea, and the United States.

Successful Treatment Response with Aripiprazole Augmentation of SSRIs in Refractory Obsessive-Compulsive Disorder in Childhood.

Science.gov (United States)

Akyol Ardic, Ulku; Ercan, Eyup Sabri; Kutlu, Ayse; Yuce, Deniz; Ipci, Melis; Inci, Sevim Berrin

2017-10-01

The aim of this study is to evaluate the aripiprazole augmentation of selective seratonine reuptake inhibitors (SSRIs) in children and adolescents with treatment-resistant OCD. Forty-eight children and adolescents (14 girls, 34 boys), who are non-responders to treatment with at least two types of SSRIs and CBT, were administered a 12-week of augmentation. Children's Yale-Brown Obsessive Compulsive Scale (CY-BOCS), and Clinical Global Impression-Severity and Improvement (CGI-S and CGI-I) sub-scales were used for evaluation of the treatment outcomes. The results showed that total CY-BOCS scores were decreased from 33.3 ± 7.5 to 11.7 ± 9.3 (p augmentation have also revealed that improvement effect was still significant, and CY-BOCS scores were improved from 34.2 ± 7.9 to 13 ± 10.3, CGI-S improved from 6.4 ± 1.0 to 3.0 ± 1.7, and CGI-I improved from 4.4 ± 1.0 to 2.3 ± 1.1 (p augmentation. Aripiprazole augmentation of SSRIs is a promising strategy in the management of treatment-refractory OCD children and adolescents.

Lingkungan dan Pemukiman Zaman Kerajaan Majapahit dalam Cgi (Computer Generated Imagery

Directory of Open Access Journals (Sweden)

Ardiyansah Ardiyansah

2010-10-01

Full Text Available Majapahit is believed to be a great civilization that once have been victorious in our archipelago. Although much is known about the Majapahit, but it turns out more obscure facts have not been revealed and need to be explored in more depth. One is how the people of Majapahit live their life, how they built the civilization by building houses and how they manage their social environment. Using CGI (Computer Generated Imagery Technology a "replica" Majapahit life can be built by combining the findings of archaeological and engineering-based digital animation 3d. 

Burger or yogurt? Indulgent consumption in impression management contexts.

Science.gov (United States)

Cheng, Yin-Hui; Huang, Molly C-J; Chuang, Shih-Chieh; Ju, Ying Rung

2015-10-01

We conducted three studies to investigate indulgent choice in settings with and without impression management by public-private manipulation with evaluation. Study 1 showed that the participants were less indulgent under public scrutiny due to the employment of impression management. Study 2 focused on the impression management context to test the moderate effect of self-consciousness in two impression managed contexts. Study 3 focused on context without impression management to test the moderate effects of self-awareness on choices. We found that depending on differences in primed personality, individuals tended to make choices other than those they favoured privately when anticipating that others might form impressions of them based on the decisions made. The findings of all three studies support our basic prediction that people are less indulgent under impression management and suggest that people tend to manage their impression by eating healthier (less indulgently) in public. © 2014 International Union of Psychological Science.

The MM-CGI Cerebral Palsy: modification and pretesting of an instrument to measure anticipatory grief in parents whose child has cerebral palsy.

Science.gov (United States)

Al-Gamal, Ekhlas; Long, Tony

2014-07-01

To establish the potential of a modified version of the MM-CGI Childhood Cancer to assess anticipatory grief in parents of children with cerebral palsy, to amend the existing scale for use with the specific patient group, to test the psychometric properties of the modified version (MM-CGI Cerebral Palsy) and to review the clinical potential of the new scale. Parents of children with cerebral palsy may experience reactions similar to parents of children with other enduring or life-limiting conditions, and anticipatory grief may be one such psychological reaction. While the burden of caring is sometimes balanced by positive perceptions of the child, which enhance coping ability, for many parents the outcome is damage to their physical and mental health and impaired family functioning. A cross-sectional, descriptive, correlational design. The MM-CGI Cerebral Palsy was administered in structured interviews with 204 parents. Standardised measures of caregivers' depression, stress and perceived social support were also administered. Mothers and fathers were recruited from healthcare centres and schools for special education. Cronbach's alpha was used to assess internal consistency, and Pearson's product-moment correlation was used to assess construct validity. The subscales were each found to measure a single dimension of anticipatory grief, and significant correlations were established with existing instruments. The instrument demonstrated excellent internal consistency reliability and good construct validity. The MM-CGI Cerebral Palsy could be useful for diagnosing anticipatory grief among parents of children with cerebral palsy. This preliminary work moves the programme on to testing in intervention studies. In the absence of an existing measure for the assessment of anticipatory grief, specifically in parents of children with cerebral palsy, the MM-CGI Cerebral Palsy could prove to be an effective assessment tool for clinicians and researchers. © 2013 John Wiley

First Impressions.

Science.gov (United States)

Coen, Frank

1969-01-01

The unreliability of first impressions and subjective judgments is the subject of both Jane Austen's "Pride and Prejudice" and Lionel Trilling's "Of This Time, Of That Place"; consequently, the works are worthwhile parallel studies for high school students. Austen, by means of irony and subtle characterization, dramatizes the…

Mania in the Nordic countries: patients and treatment in the acute phase of the EMBLEM study

DEFF Research Database (Denmark)

Larsen, Jens Knud; Porsdal, Vibeke; Aarre, Trond F

2009-01-01

countries with other European countries during the first 12 weeks of the EMBLEM (European Mania in Bipolar Longitudinal Evaluation of Medication) study. Adult patients with bipolar disorder were enrolled within standard course of care as in/outpatients if they initiated/changed oral medication...... status, functional status and pharmacological treatment. Psychiatric status at inclusion measured by the Young Mania Rating Scale (YMRS) and the Clinical Global Impression-Bipolar Disorder (CGI-BP) were similar in the Nordic and European patient groups, which is surprising as 73% of the Nordic patients...

Transdiagnostic group CBT for anxiety disorders

DEFF Research Database (Denmark)

Reinholt, Nina; Aharoni, Ruth; Winding, Clas

2017-01-01

to Mental Health Services. Pre-post-treatment effects were examined for psychiatric outpatients with anxiety disorders receiving UP treatment in groups. Forty-seven patients (mean-age = 34.1 (SD = 9.92), 77% females) with a principal diagnosis of anxiety were included. We found significant and clinically...... meaningful changes in the primary outcomes Clinical Global Impression Severity Scale (CGI-S; d = 1.36), Hamilton Anxiety Scale (HARS; d = .71), and WHO-5 Well-being Index (WHO-5; d = .54). Also, comorbid depressive symptoms and levels of positive and negative affect changed significantly after treatment...

Single Visit Feeding Appliance for 1-day-old Neonate with Cleft Palate Using Safe Dental Putty-Gauze Hybrid Impression Technique for Maxillary Impression.

Science.gov (United States)

Rathee, Manu

2015-01-01

Cleft lip and palate is one of the most common craniofacial anomalies of humans. Intraoral impression making is the first clinical step in the fabrication of feeding appliance for infants with oro-nasal communication. It is difficult to control the flow of the impression material in the cleft area and undercuts in a child patient. This clinical report presents a simple and safe impression technique for maxillary impression making in neonates and infants with cleft palate. A gauze piece was used to confine the impression material during functional movements of sucking while impression making in an awake child to avoid the risk of aspiration or swallowing.

Doses of olanzapine, risperidone, and haloperidol used in clinical practice: results of a prospective pharmacoepidemiologic study. EFESO Study Group. Estudio Farmacoepidemiologico en la Esquizofrenia con Olanzapina.

Science.gov (United States)

Sacristán, J A; Gómez, J C; Montejo, A L; Vieta, E; Gregor, K J

2000-05-01

The objectives of this study were to determine the doses of olanzapine (OLZ), risperidone (RIS), and haloperidol (HAL) used in clinical practice in outpatients with schizophrenia and the rates of occurrence of extrapyramidal symptoms (EPS) and other adverse events, clinical response, and use of concomitant medications. The present study involved a subset of patients from a 6-month, open-label, prospective observational study. Data were collected by 293 psychiatrists at mental health centers and other outpatient treatment facilities in Spain. Medications and doses used, occurrence of EPS and other adverse events, and scores on the Clinical Global Impression (CGI) of Severity Scale and Global Assessment of Function (GAF) were recorded. Clinical response was defined as a decrease of > or = 2 points on the CGI, with a final CGI score or = 5 received significantly higher overall mean daily doses than did patients with an initial CGI score < 5 (P < 0.001). A significantly lower proportion of OLZ-treated patients (10.2%) were receiving concomitant anticholinergic medication at the end of the study (month 6) compared with RIS-treated (19.9%) and HAL-treated (44.0%) patients (P < 0.001). The mean daily doses recorded in this analysis based on data from a naturalistic setting are consistent with recommendations based on clinical trials. Compared with both RIS- and HAL-treated patients, OLZ-treated patients were less likely to experience EPS or other adverse events, and less likely to use concomitant anticholinergic medications. OLZ-treated patients were also more likely to respond to treatment than were RIS-treated patients.

Relationships between clinical scales and binge eating days in adults with moderate to severe binge eating disorder in two Phase III studies.

Science.gov (United States)

Citrome, Leslie; Kando, Judith C; Bliss, Caleb

2018-01-01

In two Phase III studies, lisdexamfetamine dimesylate (LDX) reduced binge eating (BE) days/week in adults with moderate to severe binge eating disorder (BED) and was associated with improvement based on the Clinical Global Impressions-Improvement (CGI-I) scale. In this study, post hoc analyses examined the relationships between clinical observations and clinical rating scales in individuals with BED. NCT01718483 (ClinicalTrials.gov/ct2/show/NCT01718483); NCT01718509 (ClinicalTrials.gov/ct2/show/NCT01718509). Two 12-week, double-blind, placebo-controlled studies randomized (1:1) adults meeting Diagnostic and Statistical Manual of Mental Disorders , Fourth Edition, Text Revision, BED criteria and with protocol-defined moderate to severe BED (study 1, N=383; study 2, N=390) to placebo or dose-optimized LDX (50 or 70 mg). Assessments included the number of BE days/week, CGI-Severity (CGI-S) and CGI-I scores, and Yale-Brown Obsessive Compulsive Scale modified for Binge Eating (Y-BOCS-BE) total scores. For these post hoc analyses, data were pooled across studies and treatment arms. Statistical assessments included Spearman correlations and equipercentile linking analyses (ELA). Reported P -values are nominal (descriptive and not adjusted for multiplicity). At baseline, nominally significant correlations with CGI-S scores were reported for BE days/week ( r =0.374; P <0.0001) and Y-BOCS-BE total scores ( r =0.319; P <0.0001). Baseline ELA for CGI-S further characterized this relationship: a CGI-S score of 4 (moderately ill) corresponding to 3.504 BE days/week and a Y-BOCS-BE total score of 18.6. Nominally significant correlations with CGI-I scores were reported for changes from baseline at study endpoint for BE days/week ( r =0.647; P <0.0001) and Y-BOCS-BE total scores ( r =0.741; P <0.0001). ELA for CGI-I scores at study endpoint showed that a CGI-I score of 1 (very much improved) corresponds to a reduction from baseline of 4.504 BE days/week and 19.4 points for Y

A simple method for fabricating custom sectional impression trays for making definitive impressions in patients with microstomia

OpenAIRE

Bachhav, Vinay Chila; Aras, Meena Ajay

2012-01-01

Objective: A maximum mouth opening that is smaller than the size of a complete denture can make prosthetic treatment challenging. This article describes a simple technique used to fabricate maxillary and mandibular custom sectional impression trays for making definitive impressions in patients with microstomia.

Cutting Performance of Low Stress Thick TiAlN PVD Coatings during Machining of Compacted Graphite Cast Iron (CGI

Directory of Open Access Journals (Sweden)

Kenji Yamamoto

2018-01-01

Full Text Available A new family of physical vapor deposited (PVD coatings is presented in this paper. These coatings are deposited by a superfine cathode (SFC using the arc method. They combine a smooth surface, high hardness, and low residual stresses. This allows the production of PVD coatings as thick as 15 µm. In some applications, in particular for machining of such hard to cut material as compacted graphite iron (CGI, such coatings have shown better tool life compared to the conventional PVD coatings that have a lower thickness in the range of up to 5 μm. Finite element modeling of the temperature/stress profiles was done for the SFC coatings to present the temperature/stress profiles during cutting. Comprehensive characterization of the coatings was performed using XRD, TEM, SEM/EDS studies, nano-hardness, nano-impact measurements, and residual stress measurements. Application of the coating with this set of characteristics reduces the intensity of buildup edge formation during turning of CGI, leading to longer tool life. Optimization of the TiAlN-based coatings composition (Ti/Al ratio, architecture (mono vs. multilayer, and thickness were performed. Application of the optimized coating resulted in a 40–60% improvement in the cutting tool life under finishing turning of CGI.

Effects of Music on Image Impression and Relationship between Impression and Physical Properties

Science.gov (United States)

Sato, Keiko; Mitsukura, Yasue

Auditory information plays an integral role in AV media because even identical images are perceived differently when they are matched with different music. However, we now present a few studies in which the changes in subjective perceptions were analyzed on the basis of the physical properties of the perceived items. The purpose of this study is to investigate the effects of music on image impression in terms of the physical properties of images. In this paper, we first elucidate the changes in subjective impressions when the image is presented by itself and when it is presented with music. Secondly, to clarify the relation between the impression of an image or music and physical properties, we compare the different image or music perceptions with each other and also compare their respective physical properties, which include color information, structural information, and frequency characteristics. As a result, the color information of an image containing green or saturation colors and the power of the music were strongly correlated with adjectives expressing activity. Moreover, the entropy of saturation correlated with words expressing spatial extent.

Dimensional accuracy of digital dental models from cone-beam computed tomography scans of alginate impressions according to time elapsed after the impressions.

Science.gov (United States)

Lee, Sang-Mi; Hou, Yanan; Cho, Jin-Hyoung; Hwang, Hyeon-Shik

2016-02-01

Our objective was to investigate the dimensional accuracy of digital dental models obtained from the cone-beam computed tomography (CBCT) scans of alginate impressions according to the time elapsed after the impressions were taken. Alginate impressions were obtained of 20 adults using 2 alginate materials: Alginoplast (Heraeus Kulzer, Hanau, Germany) and Cavex (Cavex Holland, Haarlem, The Netherlands). These impressions were stored in wet conditions and scanned by CBCT immediately after impression-taking and after storage times of 12, 24, 36, 48, 60, and 72 hours. After reconstruction of the 3-dimensional digital dental models, the models were measured, and the data were analyzed to determine the dimensional changes according to the time elapsed. The changes within the measurement error were regarded as clinically acceptable in this study. The measurement errors ranged from 0.27 to 0.29 mm in the digital dental models obtained from CBCT scans of the alginate impressions. All measurements showed decreasing accuracy with greater elapsed time after the impressions were taken. Changes above the measurement error occurred at 24 and 36 hours for Cavex and Alginoplast, respectively. Digital dental models can be obtained from CBCT scans of alginate impressions without sending them to a remote laboratory. However, the impressions need to be scanned within 24 hours; otherwise, dimensional changes lead to errors that exceed the error of measurement. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

A 64-week, multicenter, open-label study of aripiprazole effectiveness in the management of patients with schizophrenia or schizoaffective disorder in a general psychiatric outpatient setting

Directory of Open Access Journals (Sweden)

Chiu Nan-Ying

2010-09-01

Full Text Available Abstract Objective To evaluate the overall long-term effectiveness of aripiprazole in patients with schizophrenia in a general psychiatric practice setting in Taiwan. Methods This was a prospective, open-label, multicenter, post-market surveillance study in Taiwanese patients with a Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV diagnosis of schizophrenia or schizoaffective disorder requiring a switch in antipsychotic medication because current medication was not well tolerated and/or clinical symptoms were not well controlled. Eligible patients were titrated to aripiprazole (5-30 mg/day over a 12-week switching phase, during which their previous medication was discontinued. Patients could then enter a 52-week, long-term treatment phase. Aripiprazole was flexibly dosed (5-30 mg/day at the discretion of the treating physicians. Efficacy was assessed using the Clinical Global Impression scale Improvement (CGI-I score, the Clinical Global Impression scale Severity (CGI-S score, The Brief Psychiatry Rating Scale (BPRS, and the Quality of Life (QOL scale, as well as Preference of Medicine (POM ratings by patients and caregivers. Safety and tolerability were also assessed. Results A total of 245 patients were enrolled and switched from their prior antipsychotic medications, and 153 patients entered the 52-week extension phase. In all, 79 patients (32.2% completed the study. At week 64, the mean CGI-I score was 3.10 and 64.6% of patients who showed response. Compared to baseline, scores of CGI-S, QOL, and BPRS after 64 weeks of treatment also showed significant improvements. At week 12, 65.4% of subjects and 58.9% of caregivers rated aripiprazole as better than the prestudy medication on the POM. The most frequently reported adverse events (AEs were headache, auditory hallucinations and insomnia. A total of 13 patients (5.3% discontinued treatment due to AEs. No statistically significant changes were noted with respect to

21 CFR 872.3670 - Resin impression tray material.

Science.gov (United States)

2010-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3670 Resin impression tray material. (a) Identification. Resin impression tray material is a device intended for use in a two-step dental mold fabricating... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Resin impression tray material. 872.3670 Section...

Can we measure patients' perception during dental impressions? The Burdens in Dental Impression-Making Questionnaire - BiDIM-Q.

Science.gov (United States)

Tsirogiannis, Panagiotis; Neophytou, Sophia; Reul, Anika; Heydecke, Guido; Reissmann, Daniel R

2017-01-01

To develop a reliable and valid instrument for the comprehensive assessment of patients' burdens during dental impression making, the Burdens in Dental Impression Making Questionnaire, BiDIM-Q. The item pool was generated in a convenience sample of 20 prosthodontic patients using semi-structured face-to-face interviews. The final instrument was tested in 145 consecutively recruited patients, and psychometric properties of the BiDIM-Q were determined. Four different impression materials were used according to the manufacturers' instructions and indications: alginate, c-silicone, polyvinylsiloxane, and polyether. The final BiDIM-Q consisting of 12 items showed sufficient reliability, indicated by Cronbach's alpha of .82 and an average inter-item correlation of .29. Validity was supported by Pearson correlation coefficients for the correlation between the instrument's total score with the patients' overall satisfaction rating (r=.63), and by the correlation matrix for the correlations of the patients' perceptions with the practitioners' satisfaction ratings. Overall, patient perceived burdens were low with highest burdens observed when using polyether in partially dentate patients for pick-up impressions, while lowest burdens were reported when using c-silicone for impressions of edentulous jaws. The BiDIM-Q is a reliable and valid tool for assessing patient-based process-related quality of care in dentistry allowing a deeper insight into patients' perspective during dental impression making. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

A Naturalistic Comparison of Methylphenidate and Risperidone Monotherapy in Drug-Naive Youth With Attention-Deficit/Hyperactivity Disorder Comorbid With Oppositional Defiant Disorder and Aggression.

Science.gov (United States)

Masi, Gabriele; Manfredi, Azzurra; Nieri, Giulia; Muratori, Pietro; Pfanner, Chiara; Milone, Annarita

2017-10-01

Attention-deficit/hyperactivity disorder (ADHD) and oppositional defiant disorder (ODD) are frequently co-occurring in youth, but data about the pharmacological management of this comorbidity are scarce, especially when impulsive aggression is prominent. Although stimulants are the first-line medication for ADHD, second-generation antipsychotics, namely, risperidone, are frequently used. We aimed to assess effectiveness and safety of monotherapy with the stimulant methylphenidate (MPH) and risperidone in a consecutive sample of 40 drug-naive male youths diagnosed as having ADHD-combined presentation, comorbid with ODD and aggression, without psychiatric comorbidities, according to the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition criteria and a structured clinical interview (Schedule for Affective Disorders and Schizophrenia for School-Age Children-Present and Lifetime Version). Twenty males treated with MPH (mean age, 8.95 ± 1.67 years) and 20 males treated with risperidone (mean age, 9.35 ± 2.72 years), followed up to 6 months, were assessed according to efficacy measures (Child Behavior Checklist [CBCL], Clinical Global Impression-Severity [CGI-S] and Improvement [CGI-I], Children Global Assessment Scale), and safety measures. At the end of the follow-up, both medications were similarly effective based on CBCL subscales of aggression and rule-breaking behaviors, on Diagnostic and Statistical Manual of Mental Disorders-oriented oppositional defiant problems and conduct problems, and on CGI-S, CGI-I, and Children Global Assessment Scale, but only MPH was effective on CBCL attention problems and attention-deficit/hyperactivity problems. Risperidone was associated with weight gain and elevated prolactin levels. Although the nonrandomized, nonblind design limits the conclusions of our exploratory study, our findings suggest that when ADHD is comorbid with ODD and aggression MPH and risperidone are both effective on aggressive behavior, but

Lifting bloody footwear impressions using alginate casts followed by chemical enhancement.

Science.gov (United States)

Wiesner, Sarena; Izraeli, Elad; Shor, Yaron; Domb, Avi

2013-05-01

A method for lifting bloody footwear impressions using alginate casts and enhancing the lifted impressions with amido black is presented. On rough or dark substrates, background interferences may conceal significant details of footwear impressions. Illumination with alternative light sources and chemically enhancing the bloody footwear impressions may reveal additional details, but sometimes, lifting footwear impressions prior to enhancing is the only way to expose hidden details (by using blood reagents not adequate on the original). Several cast formulations were tested for lifting the footwear impressions. The best results were achieved using Aroma fine®. Enhancement of the footwear impressions was attempted with several reagents prior to lifting, during the casting process, and on the lifted footwear impressions. Applying amido black to footwear impressions lifted with alginate produced the sharpest and most detailed footwear impressions. Alginate castings followed by chemical enhancement with amido black may produce high-quality footwear impressions for comparison. © 2013 American Academy of Forensic Sciences.

Individual variations in dose response for spatial memory learning among outbred wistar rats exposed from 5 to 20 cGy of (56) Fe particles.

Science.gov (United States)

Wyrobek, Andrew J; Britten, Richard A

2016-06-01

Exposures of brain tissue to ionizing radiation can lead to persistent deficits in cognitive functions and behaviors. However, little is known about the quantitative relationships between exposure dose and neurological risks, especially for lower doses and among genetically diverse individuals. We investigated the dose relationship for spatial memory learning among genetically outbred male Wistar rats exposed to graded doses of (56) Fe particles (sham, 5, 10, 15, and 20 cGy; 1 GeV/n). Spatial memory learning was assessed on a Barnes maze using REL3 ratios measured at three months after exposure. Irradiated animals showed dose-dependent declines in spatial memory learning that were fit by a linear regression (P for slope learning at 10 cGy exposures, no detectable learning between 10 and 15 cGy, and worsened performances between 15 and 20 cGy. The proportions of poor learners and the magnitude of their impairment were fit by linear regressions with doubling doses of ∼10 cGy. In contrast, there were no detectable deficits in learning among the good learners in this dose range. Our findings suggest that genetically diverse individuals can vary substantially in their spatial memory learning, and that exposures at low doses appear to preferentially impact poor learners. This hypothesis invites future investigations of the genetic and physiological mechanisms of inter-individual variations in brain function related to spatial memory learning after low-dose HZE radiation exposures and to determine whether it also applies to physical trauma to brain tissue and exposures to chemical neurotoxicants. Environ. Mol. Mutagen. 57:331-340, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Is disorganized schizophrenia a predictor of treatment resistance? Evidence from an observational study

Directory of Open Access Journals (Sweden)

Bruno Bertolucci Ortiz

2013-12-01

Full Text Available Objective: To investigate whether inpatients with disorganized schizophrenia are more resistant to treatment. Method: Eighty-five inpatients were assessed at admission and at discharge for schizophrenia subtype, symptom severity, and treatment resistance criteria. Results: Disorganized patients were significantly more treatment-resistant than paranoid patients (60%, p = 0.001, and presented worse scores on the Positive and Negative Syndrome Scale (PANSS, the Clinical Global Impression Scale (CGI-S, and the Global Assessment of Functioning Scale (GAF (p < 0.001. Although the difference was not significant, 80% of treatment-resistant patients with disorganized schizophrenia responded to clozapine. Conclusion: Patients with the disorganized subtype of schizophrenia should benefit from clozapine as a second-line agent.

Plutonium Finishing Plant (PFP) Safety Class and Safety Significant Commercial Grade Items (CGI) Critical Characteristic

International Nuclear Information System (INIS)

THOMAS, R.J.

2000-01-01

This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for use in the Plutonium Finishing Plant as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics of any one item

Assessing the accuracy of elastomeric Impression materials in reline method

OpenAIRE

MH. Shahrodi; M. Emamie

1995-01-01

The accuracy of relined impressions is usually acceptable and in some cases is even more accurate than principal impression. Relined Polysulfide and condensational silicone impressions are more accurate than polyether impressions. The reline method compared to retaking them is more economic and needs less chair time.

Accuracy of implant transfer with open-tray and closed-tray impression techniques and surface detail reproduction of the tooth during impression

Directory of Open Access Journals (Sweden)

Hakimeh Siadat

2012-01-01

Full Text Available Background and Aims: Accurate recording of implant location is required to achieve passive fit and have the implants without stress concentration. The aim of this in-vitro study was to evaluate the dimensional and angular accuracy of open-tray and closed-tray impression techniques using polyether impression material and also to assess the surface detail reproduction of the tooth while impression making.Materials and Methods: One reference metal model with 2 implants (Implantium on the position of the maxillary second premolar and first molar and one molar tooth for evaluation of surface details was prepared. 27 polyether impressions of these models were made (9 using open-tray, 9 using closed-tray techniques and 9 were made just of the surface of the teeth without any implants. Impressions were poured with ADA type IV stone. Coordinate Measuring Machine was used for measuring the dimensional accuracy and video measuring machine for surface detail reproduction. All of these measurements were compared with the measurements on the reference model. Data were analyzed by and compared by T-test and One-way ANOVA.Results: There was a significant statistical difference between open-tray and closed-tray techniques (P0.05.Conclusion: The accuracy of open-tray impression technique was more than closed-tray technique. The surface detail reproduction of the tooth was not affected by impression technique.

A Validation Study of the Impression Replica Technique.

Science.gov (United States)

Segerström, Sofia; Wiking-Lima de Faria, Johanna; Braian, Michael; Ameri, Arman; Ahlgren, Camilla

2018-04-17

To validate the well-known and often-used impression replica technique for measuring fit between a preparation and a crown in vitro. The validation consisted of three steps. First, a measuring instrument was validated to elucidate its accuracy. Second, a specimen consisting of male and female counterparts was created and validated by the measuring instrument. Calculations were made for the exact values of three gaps between the male and female. Finally, impression replicas were produced of the specimen gaps and sectioned into four pieces. The replicas were then measured with the use of a light microscope. The values received from measuring the specimen were then compared with the values received from the impression replicas, and the technique was thereby validated. The impression replica technique overvalued all measured gaps. Depending on location of the three measuring sites, the difference between the specimen and the impression replicas varied from 47 to 130 μm. The impression replica technique overestimates gaps within the range of 2% to 11%. The validation of the replica technique enables the method to be used as a reference when testing other methods for evaluating fit in dentistry. © 2018 by the American College of Prosthodontists.

Improvement in cerebral function with treatment of posttraumatic stress disorder.

Science.gov (United States)

Roy, Michael J; Francis, Jennifer; Friedlander, Joshua; Banks-Williams, Lisa; Lande, Raymond G; Taylor, Patricia; Blair, James; McLellan, Jennifer; Law, Wendy; Tarpley, Vanita; Patt, Ivy; Yu, Henry; Mallinger, Alan; Difede, Joann; Rizzo, Albert; Rothbaum, Barbara

2010-10-01

Posttraumatic stress disorder (PTSD) and mild traumatic brain injury (mTBI) are signature illnesses of the Iraq and Afghanistan wars, but current diagnostic and therapeutic measures for these conditions are suboptimal. In our study, functional magnetic resonance imaging (fMRI) is used to try to differentiate military service members with: PTSD and mTBI, PTSD alone, mTBI alone, and neither PTSD nor mTBI. Those with PTSD are then randomized to virtual reality exposure therapy or imaginal exposure. fMRI is repeated after treatment and along with the Clinician-Administered PTSD Scale (CAPS) and Clinical Global Impression (CGI) scores to compare with baseline. Twenty subjects have completed baseline fMRI scans, including four controls and one mTBI only; of 15 treated for PTSD, eight completed posttreatment scans. Most subjects have been male (93%) and Caucasian (83%), with a mean age of 34. Significant improvements are evident on fMRI scans, and corroborated by CGI scores, but CAPS scores improvements are modest. In conclusion, CGI scores and fMRI scans indicate significant improvement in PTSD in both treatment arms, though CAPS score improvements are less robust. © 2010 Association for Research in Nervous and Mental Disease.

A case series on the effectiveness of lurasidone in patients with stuttering.

Science.gov (United States)

Charoensook, Janet; Maguire, Gerald A

2017-08-01

The prevalence of stuttering is approximately 1% of the population, affecting an estimated 3 million individuals in the United States. The dopamine hypothesis of stuttering explains that abnormally increased cerebral dopamine affects the balanced levels that maintain the basal ganglia circuits, which helps with timing cues in initiating speech. This is especially significant when considering treatment strategies. We report a reduction in stuttering with lurasidone, a potent D2 receptor antagonist with a relatively favorable adverse effects profile. We conducted a non-randomized, open-label study of lurasidone in patients with stuttering (N = 7). Patients self-reported stuttering severity, locus of control, and avoidance using the Subjective Screening of Stuttering (SSS) scale and were assessed with the Clinical Global Impression (CGI) Scale. We observed a notable, statistically significant improvement in all areas of stuttering, as rated by the SSS scale. According to the CGI-Improvement Scale, 2 patients were scored as "very much improved" and 5 were scored as "much improved." This open-label study of lurasidone in patients with stuttering showed improvement in subjective symptoms, in CGI scores, and on the SSS scale.

Full arch scans: conventional versus digital impressions--an in-vitro study.

Science.gov (United States)

Ender, A; Mehl, A

2011-01-01

The digital intraoral impression has become a central part of the CAD/CAM technique. The objective of the present study was to compare the accuracy (trueness and precision) of digital impressions of the full arch with that of conventional impressions on the in-vitro model. For this purpose, a master model was acquired with a new reference scanning process, the measuring trueness of which was +/- 4.1 microm and the precision +/- 2.5 microm. On the one hand, conventional impressions and then plaster models (n = 5) were produced from this master model, and on the other hand, digital impressions were made with the Cerec AC Bluecam and the Lava COS system (each n = 5). The plaster models were also scanned with the reference scanner. The available data records were superimposed and the differences determined. The deviation from the master model defines the trueness of the impression method. The deviations of the models among one another demonstrate the precision of the method. The trueness of the impressions was 55 +/- 21.8 microm in the conventional impression group, for digital impressions with Cerec Bluecam it was 49 +/- 14.2 microm and for digital impressions with Lava COS 40.3 +/- 14.1 microm. The precision was 61.3 +/- 17.9 microm for conventional impression with Impregum, 30.9 +/- 7.1 microm for digital impression with the Cerec Bluecam and 60.1 +/- 31.3 microm for digital impression with Lava COS. These in-vitro results show that accuracy of the digital impression is similar to that of the conventional impression. These results will have to be confirmed in further clinical studies.

A rare allergy to a polyether dental impression material.

Science.gov (United States)

Mittermüller, Pauline; Szeimies, Rolf-Markus; Landthaler, Michael; Schmalz, Gottfried

2012-08-01

Polyether impression materials have been used in dentistry for more than 40 years. Allergic reactions to these materials such as reported in the 1970s ceased after replacement of a catalyst. Very recently, however, patients have started to report symptoms that suggest a new allergic reaction from polyether impression materials. Here, we report on the results of allergy testing with polyether impression materials as well as with its components. Eight patients with clinical symptoms of a contact allergy (swelling, redness or blisters) after exposure to a polyether impression material were subjected to patch tests, two of them additionally to a prick test. A further patient with atypical symptoms of an allergy (nausea and vomiting after contact with a polyether impression material in the oral cavity) but with a history of other allergic reaction was also patch tested. The prick tests showed no immediate reactions in the two patients tested. In the patch tests, all eight patients with typical clinical symptoms showed positive reactions to the mixed polyether impression materials, to the base paste or to a base paste component. The patient with the atypical clinical symptoms did not show any positive patch test reactions. Polyether impression materials may evoke type IV allergic reactions. The causative agent was a component of the base paste. In consideration of the widespread use of this impression material (millions of applications per year) and in comparison to the number of adverse reactions from other dental materials, the number of such allergic reactions is very low. In very scarce cases, positive allergic reactions to polyether impression materials are possible.

Impression Management Training: Conceptualization and Application to Personal Selling.

Science.gov (United States)

Leathers, Dale G.

1988-01-01

Discusses the importance of impression management, an individual's conscious attempt to exercise control over selected communicative behaviors and cues for purposes of making a desired impression. Provides a comprehensive conceptualization of the impression-management process, and demonstrates how this process can facilitate effective training of…

Social relevance enhances memory for impressions in older adults.

Science.gov (United States)

Cassidy, Brittany S; Gutchess, Angela H

2012-01-01

Previous research has demonstrated that older adults have difficulty retrieving contextual material over items alone. Recent research suggests this deficit can be reduced by adding emotional context, allowing for the possibility that memory for social impressions may show less age-related decline than memory for other types of contextual information. Two studies investigated how orienting to social or self-relevant aspects of information contributed to the learning and retrieval of impressions in young and older adults. Participants encoded impressions of others in conditions varying in the use of self-reference (Experiment 1) and interpersonal meaningfulness (Experiment 2), and completed memory tasks requiring the retrieval of specific traits. For both experiments, age groups remembered similar numbers of impressions. In Experiment 1 using more self-relevant encoding contexts increased memory for impressions over orienting to stimuli in a non-social way, regardless of age. In Experiment 2 older adults had enhanced memory for impressions presented in an interpersonally meaningful relative to a personally irrelevant way, whereas young adults were unaffected by this manipulation. The results provide evidence that increasing social relevance ameliorates age differences in memory for impressions, and enhances older adults' ability to successfully retrieve contextual information.

The Treatment of Depressed Chinese Americans Using Qigong in a Health Care Setting: A Pilot Study

Directory of Open Access Journals (Sweden)

Albert Yeung

2013-01-01

Full Text Available Background. This pilot study examined the feasibility and efficacy of providing Qigong treatment in a health center to Chinese Americans with major depressive disorder (MDD. Methods. Fourteen Chinese Americans with MDD were enrolled, and they received a 12-week Qigong intervention. The key outcome measurement was the 17-item Hamilton Rating Scale for Depression (HAM-D17; the Clinical Global Impressions-Severity (CGI-S and -Improvement (CGI-I, the Quality of Life Enjoyment and Satisfaction Questionnaire, Short Form (Q-LES-Q-SF, and the Multidimensional Scale of Perceived Social Support (MSPSS were also administered. Positive response was defined as a decrease of 50% or more on the HAM-D17, and remission was defined as HAM-D17 ≤ 7. Patients' outcome measurements were compared before and after the Qigong intervention. Results. Participants (N=14 were 64% female, with a mean age of 53 (±14. A 71% of participants completed the intervention. The Qigong intervention resulted in a positive treatment-response rate of 60% and a remission rate of 40% and statistically significant improvement, as measured by the HAM-D17, CGI-S, CGI-I, Q-LES-Q-SF, and the family support subscale of the MSPSS. Conclusions. The Qigong intervention provided at a health care setting for the treatment of primary care patients with MDD is feasible. Further studies with larger sample sizes are warranted.

Impression Management and Organizational Performance: the Portuguese case

OpenAIRE

Borges, Maria de Fátima Ribeiro

2013-01-01

This study assesses the influence of performance in the adoption of impression management strategies. The study conducts a content analysis of a sample of 45 chairman’s statements, included in the annual reports for 2010 Portuguese companies in the non-finance sector. Findings indicate that performance does not explain impression management.Consistent with social psychology theory of impression management, larger companies present a favourable image of the firm, however consistent with ...

Palliative radiation therapy for AIDS-associated Kaposi's sarcoma by using a single fraction of 800 cGy

NARCIS (Netherlands)

de Wit, R.; Smit, W. G.; Veenhof, K. H.; Bakker, P. J.; Oldenburger, F.; González, D. G.

1990-01-01

A single radiation fraction of 800 cGy was used in the treatment of acquired immunodeficiency syndrome (AIDS)-associated Kaposi's sarcoma (KS). A total of 74 radiation treatments was given to a total of 31 patients. Of all 74 evaluable treatments, there were 25 objective major responses (6 complete,

Commercial grade item (CGI) dedication of MDR relays for nuclear safety related applications

Science.gov (United States)

Das, Ranjit K.; Julka, Anil; Modi, Govind

1994-08-01

MDR relays manufactured by Potter & Brumfield (P&B) have been used in various safety related applications in commercial nuclear power plants. These include emergency safety features (ESF) actuation systems, emergency core cooling systems (ECCS) actuation, and reactor protection systems. The MDR relays manufactured prior to May 1990 showed signs of generic failure due to corrosion and outgassing of coil varnish. P&B has made design changes to correct these problems in relays manufactured after May 1990. However, P&B does not manufacture the relays under any 10CFR50 Appendix B quality assurance (QA) program. They manufacture the relays under their commercial QA program and supply these as commercial grade items. This necessitates CGI Dedication of these relays for use in nuclear-safety-related applications. This paper presents a CGI dedication program that has been used to dedicate the MDR relays manufactured after been used to dedicate the MDR relays manufactured after May 1990. The program is in compliance with current Nuclear Regulatory Commission (NRC) and Electric Power Research Institute (EPRI) guidelines and applicable industry standards; it specifies the critical characteristics of the relays, provides the tests and analysis required to verify the critical characteristics, the acceptance criteria for the test results, performs source verification to quality P&B for its control of the critical characteristics, and provides documentation. The program provides reasonable assurance that the new MDR relays will perform their intended safety functions.

Handling of Polyvinylsiloxane Versus Polyether for Implant Impressions.

Science.gov (United States)

Farhan, Daniel; Lauer, Wiebke; Heydecke, Guido; Aarabi, Ghazal; Reissmann, Daniel R

2016-01-01

This study compared polyvinylsiloxane with polyether in handling dental impressions. Each participant (N = 39) made four impressions, each a combination of pickup and reseating techniques with polyether or polyvinylsiloxane, of one implant cast representing a specific clinical situation (tooth gaps, limited residual dentition, or edentulous jaw). Handling of impressions was subsequently rated by using a 12-item questionnaire with 100-mm visual analog scales. While mean satisfaction scores were higher for polyvinylsiloxane than for polyether (69.5/63.0, P < .001), differences among subgroups were statistically significant only for pickup technique, limited residual dentition, and edentulous jaw. Implant impressions made with polyvinylsiloxane using a pickup technique seem to be the best option for most clinical situations.

[Clinical experience of the use of agomelatine in the treatment of patients with depression and chronic brain ischemia].

Science.gov (United States)

Antonen, E G; Nikitina, M V; Kruchek, M M

2015-01-01

To study the efficacy and tolerability of agomelatine (valdoxan) in treatment of mild depressive states in patients with chronic brain ischemia (CBI). The study comprised 33 patients (23 women, 10 men, average age 54.5 years), including 12 people (36.4%) with CBI, stage I, and 21 (63.6%) with CBI, stage II. All patients had a single depressive episode of mild severity. Diagnosis of affective and cognitive impairment was carried out using clinical and neuropsychological methods (the Hamilton Depression Rating Scale (HDRS-17), the Hospital Anxiety and Depression Scale (HADS), the night sleep questionnaire developed by A.M. Vein, the Mini-mental state examination (MMSE), the modified Mini-Cog method, the Montreal Cognitive Assessment Scale (MoCA), the Clinical Global Impression scale (CGI-S, CGI-I) to assess the degree and dynamics of the disease, the Patient Global Impression (PGI) scale. The survey had been performed after 2,4 and 8 weeks of treatment. Agomelatine (valdoxan) was used 1 time per day in the evening in a dose of 25 mg (1 tablet). Agomelatine improved sleep from the second week of treatment, reduced anxiety symptoms after six weeks and depressive symptoms after eight weeks. The improvement of cognitive functions was noted as well. No side-effects was observed. The results revealed the high antidepressive activity of the drug in treatment of mild depressive states in patients with chronic brain ischemia, the balanced spectrum of effects on anxiety, depression, insomnia, the positive effect on cognitive functions that allows to recommend agomelatine in treatment of patients with CBI.

Single Visit Feeding Appliance for 1-day-old Neonate with Cleft Palate Using Safe Dental Putty-Gauze Hybrid Impression Technique for Maxillary Impression

OpenAIRE

Rathee, Manu

2015-01-01

Cleft lip and palate is one of the most common craniofacial anomalies of humans. Intraoral impression making is the first clinical step in the fabrication of feeding appliance for infants with oro-nasal communication. It is difficult to control the flow of the impression material in the cleft area and undercuts in a child patient. This clinical report presents a simple and safe impression technique for maxillary impression making in neonates and infants with cleft palate. A gauze piece was us...

Botulinum toxin a can positively impact first impression.

Science.gov (United States)

Dayan, Steven H; Lieberman, Elliot D; Thakkar, Nirav N; Larimer, Karen A; Anstead, Amy

2008-06-01

BACKGROUND First impression is influenced by facial appearance and improved by cosmetic surgery. OBJECTIVE We wanted to determine if treatment with botulinum toxin A (BTxnA) would improve first impression. MATERIALS AND METHODS Women received BTxnA in the forehead. Photos were taken prior to, and 1 week after, final BTxnA injection in smiling and relaxed poses. Photos were divided into books with each subject represented only once. Evaluators completed a survey rating first impression on various measures of success for each photo. RESULTS No differences were seen for social skills, financial, or relationship success scales. A significant decrease in first impression scores between treatment photos was seen for academic performance and occupational success. However, analysis of between-subject effects found that "smile/relax" accounted for the decreased score in both scales. Significant increases in first impression scores were seen for dating success, attractiveness, and athletic success scales where smile/relax and BTxnA contributed significantly to the improved scores. CONCLUSIONS BTxnA improved first impression scores for dating success, attractiveness, and athletic success scales. Academic performance and occupational success scores were not affected by BTxnA when the smile/relax variable was included. The smile/relax variable was a more important predictor for academic performance and occupational success scores.

Sport fans' impressions of gay male athletes.

Science.gov (United States)

Campbell, Jamonn; Cothren, Denise; Rogers, Ross; Kistler, Lindsay; Osowski, Anne; Greenauer, Nathan; End, Christian

2011-01-01

The purpose of this study was to examine sport fans' impressions of gay male athletes. Participants formed impressions of a fictional athlete from their favorite team after reading a short scenario about the player. The scenarios described the athlete as being gay or straight, and either becoming a distraction or not causing a distraction to the team. While males' ratings of the athlete did not significantly differ, female fans formed significantly more positive impressions of the gay male player than the straight athlete. These results are discussed in terms of the ingroup bias and the shifting culture of homophobia in sport.

Impression cytology diagnosis of ulcerative eyelid malignancy.

Science.gov (United States)

Sen, S; Lyngdoh, A D; Pushker, N; Meel, R; Bajaj, M S; Chawla, B

2015-02-01

The utility of impression cytology in ocular diseases has predominantly been restricted to the diagnosis of dry eye, limbal stem cell deficiency and conjunctival neoplasias. Its role in malignant eyelid lesions remains largely unexplored. Although scrape cytology is more popular for cutaneous lesions, impression cytology, being non-traumatic, has an advantage in small and delicate areas such as the eyelid. The present study has been designed to evaluate its role in the diagnosis and management of malignant eyelid lesions. Thirty-two histopathologically proven malignant eyelid lesions diagnosed over a 2-year period, including 13 basal cell carcinomas, 11 sebaceous carcinomas, four squamous cell carcinomas, two malignant melanomas and two poorly differentiated carcinomas, formed the study group. The results of impression cytology were compared with those of histopathology in the study group and with an age- and sex-matched group of benign cases as controls. The sensitivity of impression cytology was 84% (27/32) for the diagnosis of malignancy and 28% (9/32) for categorization of the type of malignancy. Impression cytology is a simple, useful, non-invasive technique for the detection of malignant ulcerative eyelid lesions. It is especially useful as a follow-up technique for the detection of recurrences. © 2014 John Wiley & Sons Ltd.

Accuracy of Digital vs. Conventional Implant Impressions

Science.gov (United States)

Lee, Sang J.; Betensky, Rebecca A.; Gianneschi, Grace E.; Gallucci, German O.

2015-01-01

The accuracy of digital impressions greatly influences the clinical viability in implant restorations. The aim of this study is to compare the accuracy of gypsum models acquired from the conventional implant impression to digitally milled models created from direct digitalization by three-dimensional analysis. Thirty gypsum and 30 digitally milled models impressed directly from a reference model were prepared. The models were scanned by a laboratory scanner and 30 STL datasets from each group were imported to an inspection software. The datasets were aligned to the reference dataset by a repeated best fit algorithm and 10 specified contact locations of interest were measured in mean volumetric deviations. The areas were pooled by cusps, fossae, interproximal contacts, horizontal and vertical axes of implant position and angulation. The pooled areas were statistically analysed by comparing each group to the reference model to investigate the mean volumetric deviations accounting for accuracy and standard deviations for precision. Milled models from digital impressions had comparable accuracy to gypsum models from conventional impressions. However, differences in fossae and vertical displacement of the implant position from the gypsum and digitally milled models compared to the reference model, exhibited statistical significance (p<0.001, p=0.020 respectively). PMID:24720423

Development and Research in Previsualization for Advanced Live-Action on CGI Film Recording

OpenAIRE

Tornberg, Aron; Wennström, Sofia

2017-01-01

A major disadvantage of shooting on green screen with CGI is that the director cannot see or interact with the virtual elements in the scene and thus get a realistic view of how the end result will look like, and also not being able to make changes as necessary by moving objects and actors around during the shooting session. This disadvantage can be mitigated by the use of previsualization where the director is given a rough take of what the final cut will look like by combining the filmed ma...

Complete Denture Impression Techniques Practiced by Private Dental Practitioners: A Survey

OpenAIRE

Kakatkar, Vinay R.

2012-01-01

Impression making is an important step in fabricating complete dentures. A survey to know the materials used and techniques practiced while recording complete denture impressions was conducted. It is disheartening to know that 33 % practitioners still use base plate custom trays to record final impressions. 8 % still use alginate for making final impressions. An acceptable technique for recording CD impressions is suggested.

Multiple Antipsychotic Medication Use in Autism Spectrum Disorder.

Science.gov (United States)

Wink, Logan K; Pedapati, Ernest V; Horn, Paul S; McDougle, Christopher J; Erickson, Craig A

2017-02-01

The purpose of this study was to explore the use of multiple antipsychotic medications in patients with autism spectrum disorder (ASD) by reviewing the longitudinal medication management of 1100 patients consecutively treated for behavioral symptoms associated with ASD at a tertiary care specialty clinic. We identified all patients with ASD treated with daily doses of two or more antipsychotics for at least two visits at our clinic. For each patient meeting inclusion criteria, diagnostic and demographic data were collected. To evaluate clinical need and effectiveness of antipsychotic medications in this sample, we reviewed symptoms targeted with each antipsychotic medication and concomitant medications prescribed. Clinical Global Impressions-Severity (CGI-S) and Clinical Global Impressions-Improvement (CGI-I) scale ratings had been completed at the time of each visit, and the duration of treatment with antipsychotic medications was determined. To evaluate the safety and tolerability of antipsychotic medication use in ASD, we reviewed reported adverse effects and calculated body mass index (BMI) change with treatment. Seventy patients met the inclusion criteria (6.4% of our sample). The majority of patients were moderately to severely ill Caucasian males, as determined by baseline mean CGI-S of 4.7 (SD = 0.8), and were diagnosed with autistic disorder and comorbid intellectual disability. The mean age was 15.1 years (SD = 10.9), the primary targeted symptoms were agitation/irritability, physical aggression, and self-injury. The majority of patients remained on two or more antipsychotics for >1 year. In this population, patients demonstrated greater symptomatic improvement and generally tolerated treatment without significant adverse effects. The use of two or more antipsychotic medications may be increasingly common in patients with ASD. This retrospective study demonstrates that this treatment approach may be of some clinical benefit, and is generally well

A Randomised Controlled Trial of complete denture impression materials

Science.gov (United States)

Hyde, T.P.; Craddock, H.L.; Gray, J.C.; Pavitt, S.H.; Hulme, C.; Godfrey, M.; Fernandez, C.; Navarro-Coy, N.; Dillon, S.; Wright, J.; Brown, S.; Dukanovic, G.; Brunton, P.A.

2014-01-01

Objectives There is continuing demand for non-implant prosthodontic treatment and yet there is a paucity of high quality Randomised Controlled Trial (RCT) evidence for best practice. The aim of this research was to provide evidence for best practice in prosthodontic impressions by comparing two impression materials in a double-blind, randomised, crossover, controlled, clinical trial. Methods Eighty-five patients were recruited, using published eligibility criteria, to the trial at Leeds Dental Institute, UK. Each patient received two sets of dentures; made using either alginate or silicone impressions. Randomisations determined the order of assessment and order of impressions. The primary outcome was patient blinded preference for unadjusted dentures. Secondary outcomes were patient preference for the adjusted dentures, rating of comfort, stability and chewing efficiency, experience of each impression, and an OHIP-EDENT questionnaire. Results Seventy-eight (91.8%) patients completed the primary assessment. 53(67.9%) patients preferred dentures made from silicone impressions while 14(17.9%) preferred alginate impressions. 4(5.1%) patients found both dentures equally satisfactory and 7 (9.0%) found both equally unsatisfactory. There was a 50% difference in preference rates (in favour of silicone) (95%CI 32.7–67.3%, p alginate as their material of choice for secondary impressions for complete dentures. Trial Registration: ISRCTN 01528038.

 This article forms part of a project for which the author (TPH) won the Senior Clinical Unilever Hatton Award of the International Assocation for Dental Research, Capetown, South Africa, June 2014. PMID:24995473

Validation of the Excited Component of the Positive and Negative Syndrome Scale (PANSS-EC) in a naturalistic sample of 278 patients with acute psychosis and agitation in a psychiatric emergency room.

Science.gov (United States)

Montoya, Alonso; Valladares, Amparo; Lizán, Luis; San, Luis; Escobar, Rodrigo; Paz, Silvia

2011-03-29

Despite the wide use of the Excited Component of the Positive and Negative Syndrome Scale (PANSS-EC) in a clinical setting to assess agitated patients, a validation study to evaluate its psychometric properties was missing. Data from the observational NATURA study were used. This research describes trends in the use of treatments in patients with acute psychotic episodes and agitation seen in emergency departments. Exploratory principal component factor analysis was performed. Spearman's correlation and regression analyses (linear regression model) as well as equipercentile linking of Clinical Global Impression of Severity (CGI-S), Agitation and Calmness Evaluation Scale (ACES) and PANSS-EC items were conducted to examine the scale's diagnostic validity. Furthermore, reliability (Cronbach's alpha) and responsiveness were evaluated. Factor analysis resulted in one factor being retained according to eigenvalue ≥1. At admission, the PANSS-EC and CGI-S were found to be linearly related, with an average increase of 3.4 points (p agitated patients.

Valuing Women in Management: An Impression Management Perspective of Gender Diversity.

Science.gov (United States)

Gardner, William L., III; And Others

1994-01-01

Applies a model of impression management to explore the process whereby women in organizations present themselves to others and the impressions they create. Devotes particular attention to how these impressions influence women's experiences in organizations. Suggests future research direction for clarifying the impact of gender impression and…

Clinical improvement in patients with borderline personality disorder after treatment with repetitive transcranial magnetic stimulation: preliminary results.

Science.gov (United States)

Reyes-López, Julian; Ricardo-Garcell, Josefina; Armas-Castañeda, Gabriela; García-Anaya, María; Arango-De Montis, Iván; González-Olvera, Jorge J; Pellicer, Francisco

2018-01-01

Current treatment of borderline personality disorder (BPD) consists of psychotherapy and pharmacological interventions. However, the use of repetitive transcranial magnetic stimulation (rTMS) could be beneficial to improve some BPD symptoms. The objective of this study was to evaluate clinical improvement in patients with BPD after application of rTMS over the right or left dorsolateral prefrontal cortex (DLPFC). Twenty-nine patients with BPD from the National Institute of Psychiatry, Mexico, were randomized in two groups to receive 15 sessions of rTMS applied over the right (1 Hz, n=15) or left (5 Hz, n=14) DLPFC. Improvement was measured by the Clinical Global Impression Scale for BPD (CGI-BPD), Borderline Evaluation of Severity Over Time (BEST), Beck Depression Inventory (BDI), Hamilton Anxiety Rating Scale (HAM-A), and Barratt Impulsiveness Scale (BIS). Intragroup comparison showed significant (p < 0.05) reductions in every psychopathologic domain of the CGI-BPD and in the total scores of all scales in both groups. Both protocols produced global improvement in severity and symptoms of BPD, particularly in impulsiveness, affective instability, and anger. Further studies are warranted to explore the therapeutic effect of rTMS in BPD. NCT02273674

Accuracy of stone casts obtained by different impression materials

Directory of Open Access Journals (Sweden)

Adriana Cláudia Lapria Faria

2008-12-01

Full Text Available Several impression materials are available in the Brazilian marketplace to be used in oral rehabilitation. The aim of this study was to compare the accuracy of different impression materials used for fixed partial dentures following the manufacturers' instructions. A master model representing a partially edentulous mandibular right hemi-arch segment whose teeth were prepared to receive full crowns was used. Custom trays were prepared with auto-polymerizing acrylic resin and impressions were performed with a dental surveyor, standardizing the path of insertion and removal of the tray. Alginate and elastomeric materials were used and stone casts were obtained after the impressions. For the silicones, impression techniques were also compared. To determine the impression materials' accuracy, digital photographs of the master model and of the stone casts were taken and the discrepancies between them were measured. The data were subjected to analysis of variance and Duncan's complementary test. Polyether and addition silicone following the single-phase technique were statistically different from alginate, condensation silicone and addition silicone following the double-mix technique (p .05 to alginate and addition silicone following the double-mix technique, but different from polysulfide. The results led to the conclusion that different impression materials and techniques influenced the stone casts' accuracy in a way that polyether, polysulfide and addition silicone following the single-phase technique were more accurate than the other materials.

A randomised controlled trial of complete denture impression materials.

Science.gov (United States)

Hyde, T P; Craddock, H L; Gray, J C; Pavitt, S H; Hulme, C; Godfrey, M; Fernandez, C; Navarro-Coy, N; Dillon, S; Wright, J; Brown, S; Dukanovic, G; Brunton, P A

2014-08-01

There is continuing demand for non-implant prosthodontic treatment and yet there is a paucity of high quality Randomised Controlled Trial (RCT) evidence for best practice. The aim of this research was to provide evidence for best practice in prosthodontic impressions by comparing two impression materials in a double-blind, randomised, crossover, controlled, clinical trial. Eighty-five patients were recruited, using published eligibility criteria, to the trial at Leeds Dental Institute, UK. Each patient received two sets of dentures; made using either alginate or silicone impressions. Randomisations determined the order of assessment and order of impressions. The primary outcome was patient blinded preference for unadjusted dentures. Secondary outcomes were patient preference for the adjusted dentures, rating of comfort, stability and chewing efficiency, experience of each impression, and an OHIP-EDENT questionnaire. Seventy-eight (91.8%) patients completed the primary assessment. 53(67.9%) patients preferred dentures made from silicone impressions while 14(17.9%) preferred alginate impressions. 4(5.1%) patients found both dentures equally satisfactory and 7 (9.0%) found both equally unsatisfactory. There was a 50% difference in preference rates (in favour of silicone) (95%CI 32.7-67.3%, pUnilever Hatton Award of the International Assocation for Dental Research, Capetown, South Africa, June 2014. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Custom sectional impression trays with interlocking type handle for microstomia patients

Directory of Open Access Journals (Sweden)

Fernandes Aquaviva

2009-01-01

Full Text Available Making impressions in microstomia patients is often cumbersome. A modification of standard impression procedure is often necessary while treating such patients. This article describes the fabrication of a custom sectional impression tray with interlocking type of a handle for definitive impression procedures in a microstomia patient.

Accuracy of 3 different impression techniques for internal connection angulated implants.

Science.gov (United States)

Tsagkalidis, George; Tortopidis, Dimitrios; Mpikos, Pavlos; Kaisarlis, George; Koidis, Petros

2015-10-01

Making implant impressions with different angulations requires a more precise and time-consuming impression technique. The purpose of this in vitro study was to compare the accuracy of nonsplinted, splinted, and snap-fit impression techniques of internal connection implants with different angulations. An experimental device was used to allow a clinical simulation of impression making by means of open and closed tray techniques. Three different impression techniques (nonsplinted, acrylic-resin splinted, and indirect snap-fit) for 6 internal-connected implants at different angulations (0, 15, 25 degrees) were examined using polyether. Impression accuracy was evaluated by measuring the differences in 3-dimensional (3D) position deviations between the implant body/impression coping before the impression procedure and the coping/laboratory analog positioned within the impression, using a coordinate measuring machine. Data were analyzed by 2-way ANOVA. Means were compared with the least significant difference criterion at Pimpression technique exhibited a higher accuracy than the other techniques studied when increased implant angulations at 25 degrees were involved. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Deutetrabenazine in Tics Associated with Tourette Syndrome

Directory of Open Access Journals (Sweden)

Joseph Jankovic

2016-11-01

Full Text Available Background: Deutetrabenazine, an inhibitor of vesicular monoamine transporter type 2 (VMAT2 depletes presynaptic dopamine and is useful in the treatment of hyperkinetic movement disorders. This study explored the safety, tolerability, and preliminary efficacy of deutetrabenazine in adolescents with moderate-to-severe tics associated with Tourette syndrome (TS. Methods: In this open-label study of 12–18-year-old patients with TS-related tics, deutetrabenazine was titrated up to 36 mg/day over 6 weeks to adequately suppress tics without bothersome adverse effects (AEs, followed by maintenance at optimal dose for 2 weeks. An independent blinded rater assessed tic severity using the Yale Global Tic Severity Scale (YGTSS, which was the primary outcome measure. Secondary outcome measures included the TS Clinical Global Impression (TS-CGI and TS Patient Global Impression of Change (TS-PGIC. Results: Twenty-three enrolled patients received deutetrabenazine and had at least 1 post-baseline YGTSS assessment. The mean (SD [standard deviation] baseline YGTSS Total Tic Severity Score (TTS was 31.6 (7.9 and had decreased by 11.6 (8.2 points at week 8, a 37.6% reduction in tic severity (p<0.0001. The TS-CGI score improved by 1.2 (0.81 points (p<0.0001 and the TS-PGIC results at week 8 indicated that 76% of patients were much improved or very much improved compared with baseline. The mean (SD daily deutetrabenazine dose at week 8 was 32.1 (6.6 mg (range 18–36 mg. One week after withdrawal of deutetrabenazine, the TTS scores increased by 5.6 (8.4 points, providing confirmation of the drug effect. No serious or severe adverse events were reported. Discussion: The results of this open-label 8-week study suggest that deutetrabenazine is safe and associated with improvement in tic severity in adolescents with TS and troublesome tics.

17 CFR 200.61 - Impressions of influence.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Impressions of influence. 200...; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Canons of Ethics § 200.61 Impressions of influence. A... influence him, that any person unduly enjoys his favor or that he is affected in any way by the rank...

An evaluation of student and clinician perception of digital and conventional implant impressions.

Science.gov (United States)

Lee, Sang J; Macarthur, Robert X; Gallucci, German O

2013-11-01

The accuracy and efficiency of digital implant impressions should match conventional impressions. Comparisons should be made with clinically relevant data. The purpose of this study was to evaluate the difficulty level and operator's perception between dental students and experienced clinicians when making digital and conventional implant impressions. Thirty experienced dental professionals and 30 second-year dental students made conventional and digital impressions of a single implant model. A visual analog scale (VAS) and multiple-choice questionnaires were used to assess the participant's perception of difficulty, preference, and effectiveness. Wilcoxon signed-rank test within the groups and Wilcoxon rank-sum test between the groups were used for statistical analysis (α=.05). On a 0 to 100 VAS, the student group scored a mean difficulty level of 43.1 (±18.5) for the conventional impression technique and 30.6 (±17.6) for the digital impression technique (P=.006). The clinician group scored a mean (standard deviation) difficulty level of 30.9 (±19.6) for conventional impressions and 36.5 (±20.6) for digital impressions (P=.280). Comparison between groups showed a mean difficulty level with the conventional impression technique significantly higher in the student group (P=.030). The digital impression was not significantly different between the groups (P=.228). Sixty percent of the students preferred the digital impression and 7% the conventional impression; 33% expressed no preference. In the clinician group, 33% preferred the digital impression and 37% the conventional impression; 30% had no preference. Seventy-seven percent of the student group felt most effective with digital impressions, 10% with conventional impressions, and 13% with either technique, whereas 40% of the clinician group chose the digital impression as the most effective technique, 53% the conventional impression, and 7% either technique. The conventional impression was more difficult to

Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients.

Science.gov (United States)

Mangano, Alessandro; Beretta, Matteo; Luongo, Giuseppe; Mangano, Carlo; Mangano, Francesco

2018-01-01

The objective of the present study was to compare patients' acceptability, comfort and stress with conventional and digital impressions. Thirty young orthodontic patients (15 males and 15 females) who had no previous experience of impressions were enrolled in this study. Conventional impressions for orthodontic study models of the dental arches were taken using an alginate impression material (Hydrogum ® , Zhermack Spa, Badia Polesine, Rovigo, Italy). Fifteen days later, digital impressions of both arches were acquired using an intraoral scanner (CS3600 ® , Carestream Dental, Rochester, NY, USA). Immediately after impression taking, patients' acceptability, comfort and stress were measured using two questionnaires and the State anxiety scale. Data showed no difference in terms of anxiety and stress; however, patients preferred the use of digital impressions systems instead of conventional impression techniques. Alginate impressions resulted as fast as digital impressions. Digital impressions resulted the most accepted and comfortable impression technique in young orthodontic patients, when compared to conventional techniques.

Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients

Science.gov (United States)

Mangano, Alessandro; Beretta, Matteo; Luongo, Giuseppe; Mangano, Carlo; Mangano, Francesco

2018-01-01

Objective: The objective of the present study was to compare patients’ acceptability, comfort and stress with conventional and digital impressions. Materials and Methods: Thirty young orthodontic patients (15 males and 15 females) who had no previous experience of impressions were enrolled in this study. Conventional impressions for orthodontic study models of the dental arches were taken using an alginate impression material (Hydrogum®, Zhermack Spa, Badia Polesine, Rovigo, Italy). Fifteen days later, digital impressions of both arches were acquired using an intraoral scanner (CS3600®, Carestream Dental, Rochester, NY, USA). Immediately after impression taking, patients’ acceptability, comfort and stress were measured using two questionnaires and the State anxiety scale. Results: Data showed no difference in terms of anxiety and stress; however, patients preferred the use of digital impressions systems instead of conventional impression techniques. Alginate impressions resulted as fast as digital impressions. Conclusions: Digital impressions resulted the most accepted and comfortable impression technique in young orthodontic patients, when compared to conventional techniques. PMID:29492177

The fungicidal effect of ultraviolet light on impression materials

International Nuclear Information System (INIS)

Ishida, H.; Nahara, Y.; Tamamoto, M.; Hamada, T.

1991-01-01

The effects of ultraviolet (UV) light on fungi and impression materials were tested. UV light (250 microW/cm2) killed most Candida organisms (10(3) cells/ml) within 5 minutes. UV light (8000 microW/cm2) killed most C. albicans (10(7) cells/ml) within 2 minutes of exposure. The effect of UV light on dimensional change and surface roughness of impression materials (irreversible hydrocolloid, agar, and silicone rubber) was tested. The results showed that neither dimensional change nor surface roughness of the impression materials were affected. The results of this study indicate that UV light disinfects impression materials that are contaminated with Candida organisms

Accuracy of Referring Provider and Endoscopist Impressions of Colonoscopy Indication.

Science.gov (United States)

Naveed, Mariam; Clary, Meredith; Ahn, Chul; Kubiliun, Nisa; Agrawal, Deepak; Cryer, Byron; Murphy, Caitlin; Singal, Amit G

2017-07-01

Background: Referring provider and endoscopist impressions of colonoscopy indication are used for clinical care, reimbursement, and quality reporting decisions; however, the accuracy of these impressions is unknown. This study assessed the sensitivity, specificity, positive and negative predictive value, and overall accuracy of methods to classify colonoscopy indication, including referring provider impression, endoscopist impression, and administrative algorithm compared with gold standard chart review. Methods: We randomly sampled 400 patients undergoing a colonoscopy at a Veterans Affairs health system between January 2010 and December 2010. Referring provider and endoscopist impressions of colonoscopy indication were compared with gold-standard chart review. Indications were classified into 4 mutually exclusive categories: diagnostic, surveillance, high-risk screening, or average-risk screening. Results: Of 400 colonoscopies, 26% were performed for average-risk screening, 7% for high-risk screening, 26% for surveillance, and 41% for diagnostic indications. Accuracy of referring provider and endoscopist impressions of colonoscopy indication were 87% and 84%, respectively, which were significantly higher than that of the administrative algorithm (45%; P 90%) for determining screening (vs nonscreening) indication, but specificity of the administrative algorithm was lower (40.3%) compared with referring provider (93.7%) and endoscopist (84.0%) impressions. Accuracy of endoscopist, but not referring provider, impression was lower in patients with a family history of colon cancer than in those without (65% vs 84%; P =.001). Conclusions: Referring provider and endoscopist impressions of colonoscopy indication are both accurate and may be useful data to incorporate into algorithms classifying colonoscopy indication. Copyright © 2017 by the National Comprehensive Cancer Network.

Inherent variation in multiple shoe-sole test impressions.

Science.gov (United States)

Shor, Yaron; Wiesner, Sarena; Tsach, Tsadok; Gurel, Ron; Yekutieli, Yoram

2018-04-01

Shoeprints left at crime scenes are seldom perfect. Many prints are distorted or contaminated by various materials. Noisy background often contributes to vagueness on the shoeprints as well. Test impressions made from the suspect's shoes in the laboratory are considered a genuine replication of the shoe-sole. This naïve attitude is far from being correct. Consecutive test impressions made in the laboratory under strict similar conditions revealed differences among the exemplars of the same sole. Some of them are minor, but some are major, and can mislead the less experienced practitioners during the comparison process. This article focuses on the inherent within source variability between controlled shoeprints made from the same shoe, as it appears on the RACs. To describe and analyze this variability, repeated test impressions were prepared, and datasets were created. Several RACs were marked on each test impression, using an expert assisting software tool (developed in the authors' lab). The variance in repeated test impressions is demonstrated and possible sources are discussed. This variance should be considered when trying to establish the degree of matching between individual characteristics. Copyright © 2017. Published by Elsevier B.V.

Improvement of autism spectrum disorder symptoms in three children by using gastrin-releasing peptide,

Directory of Open Access Journals (Sweden)

Michele Michelin Becker

2016-06-01

Full Text Available Abstract Objective: To evaluate the safety, tolerability and potential therapeutic effects of gastrin-releasing peptide in three children with autistic spectrum disorder. Methods: Case series study with the intravenous administration of gastrin-releasing peptide in the dose of 160 pmol/kg for four consecutive days. To evaluate the results, parental impressions the Childhood Autism Rating Scale (CARS and the Clinical Global Impression (CGI Scale. Each child underwent a new peptide cycle after two weeks. The children were followed for four weeks after the end of the infusions. Results: The gastrin-releasing peptide was well tolerated and no child had adverse effects. Two children had improved social interaction, with a slight improvement in joint attention and the interaction initiatives. Two showed reduction of stereotypes and improvement in verbal language. One child lost his compulsion to bathe, an effect that lasted two weeks after each infusion cycle. Average reduction in CARS score was 2.8 points. CGI was "minimally better" in two children and "much better" in one. Conclusions: This study suggests that the gastrin-releasing peptide is safe and may be effective in improving key symptoms of autism spectrum disorder, but its results should be interpreted with caution. Controlled clinical trials-randomized, double-blinded, and with more children-are needed to better evaluate the possible therapeutic effects of gastrin-releasing peptide in autism.

Accuracy of a self-perforating impression tray for dental implants.

Science.gov (United States)

Marotti, Juliana; Tortamano, Pedro; Castilho, Tatiana R R N; Steagall, Washington; Wolfart, Stefan; Haselhuhn, Klaus

2014-10-01

Difficulties are involved in impression making with conventional open impression trays. The purpose of this study was to evaluate the accuracy of transferring implant impressions with a self-perforating impression tray. A reference model of a mandible was fabricated, and 4 implants were placed in the regions of the first premolars and lateral incisors (implants 1, 2, 3, 4). Ten impressions of the reference model with polyvinyl siloxane were made for each group; control (conventional open impression tray) and test (self-perforating impression tray; Miratray Implant). A metal bar was screw-retained on implant 1, and the gaps generated at the vestibular face of implants 3 and 4 were measured by optical microcopy. The 2-way ANOVA and least square difference post hoc test were used (α=.05). Higher mean (±SD) values were obtained for the test group than for the control group for both implants: implant 3: 150 ±84 μm for the test group, 73 ±63 μm for the control group (P=.019); implant 4: 129 ±65 μm for the test group, 62 ±61 μm for the control group (P=.04). The self-perforating impression tray provided less accuracy than the conventional open tray. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

In vivo precision of conventional and digital methods for obtaining quadrant dental impressions.

Science.gov (United States)

Ender, Andreas; Zimmermann, Moritz; Attin, Thomas; Mehl, Albert

2016-09-01

Quadrant impressions are commonly used as alternative to full-arch impressions. Digital impression systems provide the ability to take these impressions very quickly; however, few studies have investigated the accuracy of the technique in vivo. The aim of this study is to assess the precision of digital quadrant impressions in vivo in comparison to conventional impression techniques. Impressions were obtained via two conventional (metal full-arch tray, CI, and triple tray, T-Tray) and seven digital impression systems (Lava True Definition Scanner, T-Def; Lava Chairside Oral Scanner, COS; Cadent iTero, ITE; 3Shape Trios, TRI; 3Shape Trios Color, TRC; CEREC Bluecam, Software 4.0, BC4.0; CEREC Bluecam, Software 4.2, BC4.2; and CEREC Omnicam, OC). Impressions were taken three times for each of five subjects (n = 15). The impressions were then superimposed within the test groups. Differences from model surfaces were measured using a normal surface distance method. Precision was calculated using the Perc90_10 value. The values for all test groups were statistically compared. The precision ranged from 18.8 (CI) to 58.5 μm (T-Tray), with the highest precision in the CI, T-Def, BC4.0, TRC, and TRI groups. The deviation pattern varied distinctly depending on the impression method. Impression systems with single-shot capture exhibited greater deviations at the tooth surface whereas high-frame rate impression systems differed more in gingival areas. Triple tray impressions displayed higher local deviation at the occlusal contact areas of upper and lower jaw. Digital quadrant impression methods achieve a level of precision, comparable to conventional impression techniques. However, there are significant differences in terms of absolute values and deviation pattern. With all tested digital impression systems, time efficient capturing of quadrant impressions is possible. The clinical precision of digital quadrant impression models is sufficient to cover a broad variety of

Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition.

Science.gov (United States)

Rhee, Ye-Kyu; Huh, Yoon-Hyuk; Cho, Lee-Ra; Park, Chan-Jin

2015-12-01

The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (Pimpression and the smallest difference was seen between dual-arch and full-arch impression. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P.05).

In vivo precision of conventional and digital methods for obtaining quadrant dental impressions

OpenAIRE

Ender, Andreas; Zimmermann, Moritz; Attin, Thomas; Mehl, Albert

2016-01-01

OBJECTIVES Quadrant impressions are commonly used as alternative to full-arch impressions. Digital impression systems provide the ability to take these impressions very quickly; however, few studies have investigated the accuracy of the technique in vivo. The aim of this study is to assess the precision of digital quadrant impressions in vivo in comparison to conventional impression techniques. MATERIALS AND METHODS Impressions were obtained via two conventional (metal full-arch tray, CI, ...

Accuracy of Different Implant Impression Techniques: Evaluation of New Tray Design Concept.

Science.gov (United States)

Liu, David Yu; Cader, Fathima Nashmie; Abduo, Jaafar; Palamara, Joseph

2017-12-29

To evaluate implant impression accuracy with a new tray design concept in comparison to nonsplinted and splinted impression techniques for a 2-implant situation. A reference bar titanium framework was fabricated to fit on 2 parallel implants. The framework was used to generate a resin master model with 2 implants that fit precisely against the framework. Three impression techniques were evaluated: (1) nonsplinted, (2) splinted, and (3) nonsplinted with modified tray impressions. All the trays were fabricated from light-cured acrylic resin material with openings that corresponded to the implant impression copings. Ten impressions were taken for each technique using poly(vinyl siloxane) impression material. The impressions were poured with type IV dental stone to generate the test casts. A rosette strain gauge was bonded to the middle of the framework. As the framework retaining screws were tightened on each test cast, the developed strains were recorded until the completion of the tightening to 35 Ncm. The generated strains of the rosette strain gauge were used to calculate the maximum principal strain. A statistically significant difference was observed among the different impression techniques. The modified tray design impression technique was associated with the least framework strains, which indicates greater accuracy compared with the other techniques. There was no significant difference between the splinted and the nonsplinted impression techniques. The new tray design concept appeared to produce more accurate implant impressions than the other techniques. Despite the statistical difference among the impression techniques, the clinical significance of this difference is yet to be determined. © 2017 by the American College of Prosthodontists.

[Impression Formation in the Diagnosis and Treatment of Mental Disorders].

Science.gov (United States)

Linden, Michael; Dymke, Tina; Hüttner, Susanne; Schnaubelt, Sabine

2016-06-01

The first item of any psychopathological assessment is "general impression". There is some research under the heading of "impression formation" which shows that the outer appearance of a person decides about how a person is perceived by others and how others react. Impression formation is an important factor in social interaction. This is of special importance in mental disorders, which may express themselves in a distorted impression formation. As impression formation is by and large an emotional process, measurement can be done by adjective lists. An example is the bipolar MED rating scale. Such lists can be used in therapy to help patients and therapists to understand the problem and initiate modifications. A special group intervention in occupational therapy is described. Results suggest that impression formation is quite objective, that self- and observer judgments coincide and that therapy can help to adopt a less irritating outer appearance. © Georg Thieme Verlag KG Stuttgart · New York.

Virtual First Impressions

Science.gov (United States)

Bergren, Martha Dewey

2005-01-01

Frequently, a nurse's first and only contact with a graduate school, legislator, public health official, professional organization, or school nursing colleague is made through e-mail. The format, the content, and the appearance of the e-mail create a virtual first impression. Nurses can manage their image and the image of the profession by…

Regionalizing global climate models

NARCIS (Netherlands)

Pitman, A.J.; Arneth, A.; Ganzeveld, L.N.

2012-01-01

Global climate models simulate the Earth's climate impressively at scales of continents and greater. At these scales, large-scale dynamics and physics largely define the climate. At spatial scales relevant to policy makers, and to impacts and adaptation, many other processes may affect regional and

The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing the quality of the impressions of prepared teeth.

Science.gov (United States)

Storey, D; Coward, T J

2013-06-01

The literature is limited in studies directly assessing the quality of impressions for crowns and bridges in the UK. The aim of the study was to assess the quality of impressions for conventional crown and bridgework received by commercial dental laboratories. Three dental laboratories were visited over a 3-month period. All impressions for conventional crowns and bridges that arrived on the days of the visits were examined prior to any laboratory processing. A total of 206 impression cases were examined and assessed against criteria laid out in a custom-designed assessment form. Defects were commonly found in the recording of prepared teeth. Overall, 44.2% of impression cases were unsatisfactory. NHS impressions were more than twice as likely to be unsatisfactory compared to private impressions. If the results of this survey are typical then the general quality of impressions for fixed crown and bridgework is unacceptable. This is particularly true for work completed under the NHS contract.

IMPRESS Integrated Project-An overview paper

International Nuclear Information System (INIS)

Jarvis, D.J.; Voss, D.

2005-01-01

IMPRESS is an acronym for Intermetallic Materials Processing in Relation to Earth and Space Solidification. This project was selected by the European Commission and recently started in November 2004. The main scientific objective of IMPRESS is to gain a better understanding of the links between materials processing routes, structure and final properties of intermetallic alloys. Technically speaking, the project aims to develop and test two distinct prototypes based on intermetallic materials, namely gas turbine blades and Raney-type catalytic powder. Numerous material processing routes are being explored within the project with a strong emphasis on solidification. For turbine blade manufacturing, the principal processes under study are tilt casting, counter-gravity casting and centrifugal casting. For catalytic powder production, the focus is placed on gas atomisation and vapour condensation processes. IMPRESS combines a wide range of fundamental studies of solidification both on ground and in space, as well as industrial process development. This paper will describe some of the different facets related to solidification

Accuracy of five implant impression technique: effect of splinting materials and methods

Science.gov (United States)

Cho, Sung-Bum

2011-01-01

PURPOSE The aim of this study was to evaluate the effect of dimensional stability of splinting material on the accuracy of master casts. MATERIALS AND METHODS A stainless steel metal model with 6 implants embedded was used as a master model. Implant level impressions were made after square impression copings were splinted using 5 different techniques as follows. (1) Splinted with autopolymerizing resin and sectioned, reconnected to compensate polymerization shrinkage before the impression procedure. (2) Splinted with autopolymerizing resin just before impression procedure. (3) Primary impression made with impression plaster and secondary impression were made over with polyether impression material. (4) Splinted with impression plaster. (5) Splinted with VPS bite registration material. From master model, 5 impressions and 5 experimental casts, total 25 casts were made for each of 5 splinting methods. The distortion values of each splinting methods were measured using coordinate measuring machine, capable of recordings in the x-, y-, z-axes. A one-way analysis of variance (ANOVA) at a confidence level of 95% was used to evaluate the data and Tukey's studentized range test was used to determine significant differences between the groups. RESULTS Group 1 showed best accuracy followed by Group 3 & 4. Group 2 and 5 showed relatively larger distortion value than other groups. No significant difference was found between group 3, 4, 5 in x-axis, group 2, 3, 4 in y-axis and group 1, 3, 4, 5 in z-axis (Pimpression copings with autopolymerizing resin following compensation of polymerization shrinkage and splinting method with impression plaster can enhance the accuracy of master cast and impression plaster can be used simple and effective splinting material for implant impression procedure. PMID:22259700

Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition

Science.gov (United States)

Rhee, Ye-Kyu

2015-01-01

PURPOSE The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (Pimpression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P.05). PMID:26816576

Digital vs. conventional full-arch implant impressions: a comparative study.

Science.gov (United States)

Amin, Sarah; Weber, Hans Peter; Finkelman, Matthew; El Rafie, Khaled; Kudara, Yukio; Papaspyridakos, Panos

2017-11-01

To test whether or not digital full-arch implant impressions with two different intra-oral scanners (CEREC Omnicam and True Definition) have the same accuracy as conventional ones. The hypothesis was that the splinted open-tray impressions would be more accurate than digital full-arch impressions. A stone master cast representing an edentulous mandible using five internal connection implant analogs (Straumann Bone Level RC, Basel, Switzerland) was fabricated. The three median implants were parallel to each other, the far left implant had 10°, and the far right had 15° distal angulation. A splinted open-tray technique was used for the conventional polyether impressions (n = 10) for Group 1. Digital impressions (n = 10) were taken with two intra-oral optical scanners (CEREC Omnicam and 3M True Definition) after connecting polymer scan bodies to the master cast for groups 2 and 3. Master cast and conventional impression test casts were digitized with a high-resolution reference scanner (Activity 880 scanner; Smart Optics, Bochum, Germany) to obtain digital files. Standard tessellation language (STL) datasets from the three test groups of digital and conventional impressions were superimposed with the STL dataset from the master cast to assess the 3D deviations. Deviations were recorded as root-mean-square error. To compare the master cast with conventional and digital impressions at the implant level, Welch's F-test was used together with Games-Howell post hoc test. Group I had a mean value of 167.93 μm (SD 50.37); Group II (Omnicam) had a mean value of 46.41 μm (SD 7.34); Group III (True Definition) had a mean value of 19.32 μm (SD 2.77). Welch's F-test was used together with the Games-Howell test for post hoc comparisons. Welch's F-test showed a significant difference between the groups (P digital implant impressions using True Definition scanner and Omnicam were significantly more accurate than the conventional impressions with the splinted open

Efficacy, acceptability, and safety of adjunctive aripiprazole in treatment-resistant depression: a meta-analysis of randomized controlled trials

Directory of Open Access Journals (Sweden)

Luan SX

2018-02-01

Full Text Available Shuxin Luan,1,2 Hongquan Wan,2 Lei Zhang,3 Hua Zhao1,4 1Department of Physiology, College of Basic Medical Sciences, Jilin University, Changchun, China; 2Department of Mental Health, The First Hospital of Jilin University, Changchun, China; 3Department of Radiology, The First Hospital of Jilin University, Changchun, China; 4Neuroscience Research Center, The First Hospital of Jilin University, Changchun, China Background: Treatment-resistant depression (TRD is common and potentially life-threatening in adults, and the benefits and risks of adjunctive aripiprazole in these patients remain controversial. Therefore, we conducted a meta-analysis of randomized controlled trials (RCTs to assess the efficacy, acceptability, safety, and quality of life of adjunctive aripiprazole in patients with TRD.Methods: RCTs published in PubMed, Web of Science, and Embase were systematically reviewed to evaluate the efficacy and safety profiles of TRD patients who were treated with adjunctive aripiprazole. The main outcome measures included response rate, remission rate, changes from baseline in Montgomery–Asberg Depression Rating Scale (MADRS, Clinical Global Impression-severity (CGI-S, Clinical Global Impression-improvement (CGI-I, 17-Item Hamilton Rating Scale for Depression (HAM-D17, Sheehan Disability scale (SDS, and Inventory of Depressive Symptomatology Self-Report Scale (IDS-SR, discontinuation due to adverse events, and adverse events. Risk ratio (RR or weight mean difference with 95% confidence intervals (CIs were pooled using a fixed-effects or random-effects model according to the heterogeneity among studies.Results: A total of 8 RCTs involving 2,260 patients were included in this meta-analysis. Adjunctive aripiprazole was associated with a significantly higher remission rate (RR =1.64, 95% CI: 1.42 to 1.89; P<0.001 and response rate (RR =1.45, 95% CI: 1.13 to 1.87; P=0.004 than other treatments. Moreover, adjunctive aripiprazole had greater changes in

Self-stigma and schizophrenia: a cross-sectional study

Directory of Open Access Journals (Sweden)

Vrbova K

2016-11-01

Full Text Available Kristyna Vrbova,1 Jan Prasko,1 Michaela Holubova,1,2 Dana Kamaradova,1 Marie Ociskova,1 Marketa Marackova,1 Klara Latalova,1 Ales Grambal,1 Milos Slepecky,3 Marta Zatkova3 1Department of Psychiatry, Faculty of Medicine and Dentistry, Palacky University in Olomouc, University Hospital Olomouc, Olomouc, 2Department of Psychiatry, Hospital Liberec, Liberec, Czech Republic; 3Department of Psychology Sciences, Faculty of Social Science and Health Care, Constantine the Philosopher University, Nitra, Slovak Republic Objective: The aim of this study was to investigate the degree of self-stigma in schizophrenia and its association with clinical and demographic factors. Patients and methods: A total of 197 outpatients (54.3% females diagnosed with schizophrenia spectrum disorders (schizophrenia, schizoaffective disorder, delusional disorder according to International Classification of Diseases – tenth edition participated in the study. The mean age of the patients was 40.10±11.49 years. All individuals completed the Internalized Stigma of Mental Illness (ISMI scale and a demographic questionnaire. The disorder severity was assessed by both a psychiatrist (the objective version of Clinical Global Impression – severity scale [objCGI-S] and the patients (the subjective version of Clinical Global Impression – severity scale [subjCGI-S]. Treatment with antipsychotics stabilized the patients. Results: The overall level of self-stigma measured by the total score of the ISMI was 63.32±13.59. The total score of the ISMI positively correlated with the severity of the disorder measured by the objCGI-S and subjCGI-S. In addition, self-stigma positively correlated with the treatment duration and the number of psychiatric hospitalizations. The backward stepwise regression was applied to identify the most significant factors connected to self-stigma. The regression analysis identified the following regressors as the most relevant to self-stigma: the number of

galaxie--CGI scripts for sequence identification through automated phylogenetic analysis.

Science.gov (United States)

Nilsson, R Henrik; Larsson, Karl-Henrik; Ursing, Björn M

2004-06-12

The prevalent use of similarity searches like BLAST to identify sequences and species implicitly assumes the reference database to be of extensive sequence sampling. This is often not the case, restraining the correctness of the outcome as a basis for sequence identification. Phylogenetic inference outperforms similarity searches in retrieving correct phylogenies and consequently sequence identities, and a project was initiated to design a freely available script package for sequence identification through automated Web-based phylogenetic analysis. Three CGI scripts were designed to facilitate qualified sequence identification from a Web interface. Query sequences are aligned to pre-made alignments or to alignments made by ClustalW with entries retrieved from a BLAST search. The subsequent phylogenetic analysis is based on the PHYLIP package for inferring neighbor-joining and parsimony trees. The scripts are highly configurable. A service installation and a version for local use are found at http://andromeda.botany.gu.se/galaxiewelcome.html and http://galaxie.cgb.ki.se

Dental impression technique using optoelectronic devices

Science.gov (United States)

Sinescu, Cosmin; Barua, Souman; Topala, Florin Ionel; Negrutiu, Meda Lavinia; Duma, Virgil-Florin; Gabor, Alin Gabriel; Zaharia, Cristian; Bradu, Adrian; Podoleanu, Adrian G.

2018-03-01

INTRODUCTION: The use of Optical Coherence Tomography (OCT) as a non-invasive and high precision quantitative information providing tool has been well established by researches within the last decade. The marginal discrepancy values can be scrutinized in optical biopsy made in three dimensional (3D) micro millimetre scale and reveal detailed qualitative and quantitative information of soft and hard tissues. OCT-based high resolution 3D images can provide a significant impact on finding recurrent caries, restorative failure, analysing the precision of crown preparation, and prosthetic elements marginal adaptation error with the gingiva and dental hard tissues. During the CAD/CAM process of prosthodontic restorations, the circumvent of any error is important for the practitioner and the technician to reduce waste of time and material. Additionally, OCT images help to achieve a new or semi-skilled practitioner to analyse their crown preparation works and help to develop their skills faster than in a conventional way. The aim of this study is to highlight the advantages of OCT in high precision prosthodontic restorations. MATERIALS AND METHODS: 25 preparations of frontal and lateral teeth were performed for 7 different patients. The impressions of the prosthetic fields were obtained both using a conventional optoelectronic system (Apolo Di, Syrona) and a Spectral Domain using OCT (Dental prototype, working at 860 nm). For the conventional impression technique the preparation margins were been prelevated by gingival impregnated cords. No specific treatments were performed by the OCT impression technique. RESULTS: The scanning performed by conventional optoelectronic system proved to be quick and accurate in terms of impression technology. The results were represented by 3D virtual models obtained after the scanning procedure was completed. In order to obtain a good optical impression a gingival retraction cord was inserted between the prepared tooth and the gingival

Effects of Lighting Direction on the Impression of Faces and Objects and the Role of Gaze Direction in the Impression-Forming

Directory of Open Access Journals (Sweden)

Keiichi Horibata

2011-10-01

Full Text Available We examined whether lighting direction, left or right, has an influence on the impression of faces and objects, and the role of gaze direction in the impression-forming. In the first experiment, we examined how lighting directions influenced the impression of faces and objects. On each trial, a pair of faces or objects was presented on top of each other. Left side was brighter in one and right side was brighter in the other. The participants were asked to answer which face or object was more preferable. The results showed that the participants preferred left-brighter faces and objects significantly more frequently than right-brighter stimuli (p < .05, chi-square test. The effect was especially strong in the upright faces. The results suggested that faces and objects give better impressions when they are lit from the left. In the second experiment, we examined whether eye-movement would play a role in our preference for left-brighter faces and objects. We recorded eye-movements of the participants while doing the same task as the first experiment. The results showed that the participants' preference for left-brighter faces were stronger when the participant started viewing from the left. The gaze direction may modulate our impression-formation (Shimojo et al. 2003.

Imipramine for vestibular dysfunction in panic disorder: a prospective case series

Directory of Open Access Journals (Sweden)

Marco Andre Mezzasalma

2011-04-01

Full Text Available OBJECTIVE: The purpose of this study was to evaluate the efficacy and effectiveness of imipramine on the treatment of comorbid chronic dizziness and panic disorder. METHOD: Nine patients with panic disorder and agoraphobia associated with chronic dizziness underwent otoneurological screening and were treated with a 3-months course of imipramine. Anxiety levels were measured with the Hamilton Anxiety Scale (HAM-A, dizziness levels were evaluated using the Dizziness Handicap Inventory (DHI, and panic severity and treatment outcome were assessed with the Clinical Global Impression Scale (CGI. RESULTS: At the baseline 33.3% (n=3 had a bilateral peripheral deficit vestibulopathy, the mean scores for HAM-A were 27.2±10.4, for DHI were 51.7±22.7, and for CGI-S were 4.8±0.9. All patients had a significant reduction in their HAM-A (11.1±5.5, p=0.008, DHI (11.5±8.1, p=0.008 and CGI-I (1.8±0.7, p=0.011 levels after 3-months imipramine treatment (mean=72.2±23.2 mg/day. CONCLUSION: This study found a decrease in anxiety levels and in the impact of dizziness in the patients' quality of life after a 3-months treatment course with imipramine.

Use of Clinical UV Chamber to Disinfect Dental Impressions: A Comparative Study.

Science.gov (United States)

Aeran, Himanshu; Sharma, Sakshi; Kumar, Varun; Gupta, Neelu

2015-08-01

Dental impressions are potential source of infection in a prosthodontic practice. Risk of transmission of infection through saliva, blood etc is considered as hazard for both dentist as well as dental auxiliary staff. A number of methods are currently employed for disinfecting the impressions which are technique sensitive and time consuming. This study focuses on disinfecting impression using dental UV chamber which is commonly employed for storing sterilized instruments. The aim of this invitro study was to evaluate the use of clinical UV chamber to disinfect various impression materials at different time intervals and its comparison with 2% glutaraldehyde using standard immersion technique. Total sample size of 180 specimens was taken from three different impression materials. The impressions were made from 30 dentulous subjects. A total of ten impressions were made for each impression material i.e. alginate, addition silicone and polyether impression material. Six punch samples were taken from each impression. Out of 6 punch sample, one was kept as control, second was disinfected by immersing in freshly prepared 2% glutaraldehyde solution for 10 minutes and remaining four were exposed to UV rays for 3 minutes, 6 minutes, 10 minutes and 15 minutes using dental UV chamber. Amount of disinfection achieved was evaluated by counting the colonies over the culture plates with the help of digital colony. The results showed that the mean CFUs for alginate were found to be i.e. 11797.40 ± 5989.73 (mean ± SD). The mean CFUs for addition silicone impression material was found 7095.40 with a standard deviation of 4268.83 and the mean CFUs for polyether impression material was found to be 2168.92 ± 1676 (mean ± SD). For alginate and addition silicone impression material, disinfection was achieved on exposure to UV rays for a period of 10 minutes. However, for polyether impression material 3 minutes of exposure to UV rays was sufficient to cause complete disinfection.

Outcome dependency alters the neural substrates of impression formation

Science.gov (United States)

Ames, Daniel L.; Fiske, Susan T.

2015-01-01

How do people maintain consistent impressions of other people when other people are often inconsistent? The present research addresses this question by combining recent neuroscientific insights with ecologically meaningful behavioral methods. Participants formed impressions of real people whom they met in a personally involving situation. fMRI and supporting behavioral data revealed that outcome dependency (i.e., depending on another person for a desired outcome) alters previously identified neural dynamics of impression formation. Consistent with past research, a functional localizer identified a region of dorsomedial PFC previously linked to social impression formation. In the main task, this ROI revealed the predicted patterns of activity across outcome dependency conditions: greater BOLD response when information confirmed (vs. violated) social expectations if participants were outcome-independent and the reverse pattern if participants were outcome-dependent. We suggest that, although social perceivers often discount expectancy-disconfirming information as noise, being dependent on another person for a desired outcome focuses impression-formation processing on the most diagnostic information, rather than on the most tractable information. PMID:23850465

Patients' preferences when comparing analogue implant impressions using a polyether impression material versus digital impressions (Intraoral Scan) of dental implants

NARCIS (Netherlands)

Wismeijer, D.; Mans, R.S.; Van Genuchten, M.J.I.M; Reijers, H.A.

2014-01-01

Objectives: The primary objective of this clinical study was to assess the patients' perception of the difference between an analogue impression approach on the one hand and an intra-oral scan (IO scan) on the other when restoring implants in the non-aesthetic zone. A second objective was to analyse

Patients' preferences when comparing analogue implant impressions using a polyether impression material versus digital impressions (Intraoral Scan) of dental implants

NARCIS (Netherlands)

Wismeijer, D.; Mans, R.; van Genugten, M.; Reijers, H.A.

2014-01-01

Objectives The primary objective of this clinical study was to assess the patients' perception of the difference between an analogue impression approach on the one hand and an intra-oral scan (IO scan) on the other when restoring implants in the non-aesthetic zone. A second objective was to analyse

Impression Management: The Web Presence of College Presidents

Science.gov (United States)

Morgan, Joanne Cardin

2013-01-01

Leadership profile pages on organizational websites have become staged opportunities for impression management. This research uses content analysis to examine the strategies of assertive impression management used to construct the leadership Web presence of the 70 presidents of national public universities, as identified in the "US News and…

Comparison Of The Dimensional Stability Of Alginate Impressions ...

African Journals Online (AJOL)

Methodology: Alginate impressions of a master model of truncated metal cones were made and disinfected with 1% sodium hypochlorite constituted from 3.5% household bleach using the spray and immersion technique for 10;20 and 30 minutes. Impressions were cast in dental stone and the linear dimensional differences ...

Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions

Directory of Open Access Journals (Sweden)

Ahmad Ghahremanloo

2017-02-01

Full Text Available Objectives: The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS.Materials and Methods: Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body and direct and indirect techniques (six groups were used, and seven impressions were obtained from each group (n=42. To measure the accuracy of impressions, drift, horizontal, and vertical angles of the implants, as well as the hex rotation of the implants in casts were evaluated using a digitizer device (1μm accuracy, in comparison with master arch. Data were analyzed using five-factor two-way ANOVA and Tukey’s post-hoc test.Results: The accuracy of impressions was assessed and the results showed that direct technique was not significantly different from indirect technique (P>0.05. Also, there were no significant differences between the mentioned viscosities except for the horizontal angle (P=0.006.Conclusions: Viscosity of impression materials is of high significance for the accuracy of dental impressions.Keywords: Dental Materials; Dental Implants; Dental Impression Technique; Viscosity; Vinyl Polysiloxane; Dimensional Measurement Accuracy

Impressions of functional food consumers.

Science.gov (United States)

Saher, Marieke; Arvola, Anne; Lindeman, Marjaana; Lähteenmäki, Liisa

2004-02-01

Functional foods provide a new way of expressing healthiness in food choices. The objective of this study was to apply an indirect measure to explore what kind of impressions people form of users of functional foods. Respondents (n=350) received one of eight versions of a shopping list and rated the buyer of the foods on 66 bipolar attributes on 7-point scales. The shopping lists had either healthy or neutral background items, conventional or functional target items and the buyer was described either as a 40-year-old woman or man. The attribute ratings revealed three factors: disciplined, innovative and gentle. Buyers with healthy background items were perceived as more disciplined than those having neutral items on the list, users of functional foods were rated as more disciplined than users of conventional target items only when the background list consisted of neutral items. Buyers of functional foods were regarded as more innovative and less gentle, but gender affected the ratings on gentle dimension. The impressions of functional food users clearly differ from those formed of users of conventional foods with a healthy image. The shopping list method performed well as an indirect method, but further studies are required to test its feasibility in measuring other food-related impressions.

Effects of disinfecting alginate impressions on the scratch hardness of stone models.

Science.gov (United States)

Hiraguchi, Hisako; Nakagawa, Hisami; Wakashima, Mitsuru; Miyanaga, Kohichi; Saigo, Masataka; Nishiyama, Minoru

2006-03-01

This study investigated the effects of disinfecting alginate impressions on the scratch depth of resultant stone models. Eleven brands of alginate impression material and two disinfectants, 1% sodium hypochlorite and 2% glutaraldehyde, were used. Impressions were immersed in disinfectant solutions or stored in sealed bags after spraying with disinfectants, and then poured with a type V dental stone. The scratch depth of the stone model obtained from disinfected impression was measured. The storage of alginate impressions after spraying with disinfectants did not increase the scratch depth of resultant stone models. However, the effect of immersion in disinfectants on scratch depth varied with the brand of the alginate impression material.

An impressive start

CERN Multimedia

2011-01-01

This has been an excellent week for the LHC, with a succession of fills rapidly increasing the number of proton bunches to 194 per beam. This has allowed the experiments to reach a peak luminosity of 2.5 × 1032 cm-2s-1, thereby surpassing the record for 2010 where we reached 2.0 × 1032 cm-2s-1. At the time of writing, the integrated luminosity delivered by the LHC in 2011 is around 28 inverse picobarns, which is already more than half of the total 2010 dataset.   These are impressive numbers, but what impresses me most is how quickly the LHC operators are now able to turn the machine around between fills, and how well LHC running has been incorporated into the overall operation of CERN’s accelerator complex. The flexibility of the LHC was illustrated on Thursday when we started a short phase of running at 1.38 TeV per beam, equivalent to the energy-per-nucleon of a lead-ion run. This lower energy data will be used by the experiments, in particular by ALICE, to compare...

Intraoral digital impressions to enhance implant esthetics.

Science.gov (United States)

Hinds, Kenneth F

2014-09-01

Providing an accurate soft-tissue transfer for anterior implants is not a new concept; however, it is currently an especially relevant one. There are numerous documented cases in which residual excess cement with cement-retained implant restorations was a contributing cause in periimplantitis. In 2012, Wadhwani et al reported the importance of placing the crown abutment margins supragingivally for ease of cement removal as a possible solution to address this important issue. Therefore, if placement of the crown abutment margin location is imperative, making an impression that reproduces the soft tissue is equally critical. In 1997, this author introduced the "custom impression coping" to achieve such an accurate transfer. Given the wide use of intraoral digital impressions in 2014, this discussion describes how to fabricate a "custom scan body" using that technology to replicate the transition zone in the virtual environment.

Auditory and visual spatial impression: Recent studies of three auditoria

Science.gov (United States)

Nguyen, Andy; Cabrera, Densil

2004-10-01

Auditory spatial impression is widely studied for its contribution to auditorium acoustical quality. By contrast, visual spatial impression in auditoria has received relatively little attention in formal studies. This paper reports results from a series of experiments investigating the auditory and visual spatial impression of concert auditoria. For auditory stimuli, a fragment of an anechoic recording of orchestral music was convolved with calibrated binaural impulse responses, which had been made with the dummy head microphone at a wide range of positions in three auditoria and the sound source on the stage. For visual stimuli, greyscale photographs were used, taken at the same positions in the three auditoria, with a visual target on the stage. Subjective experiments were conducted with auditory stimuli alone, visual stimuli alone, and visual and auditory stimuli combined. In these experiments, subjects rated apparent source width, listener envelopment, intimacy and source distance (auditory stimuli), and spaciousness, envelopment, stage dominance, intimacy and target distance (visual stimuli). Results show target distance to be of primary importance in auditory and visual spatial impression-thereby providing a basis for covariance between some attributes of auditory and visual spatial impression. Nevertheless, some attributes of spatial impression diverge between the senses.

Digitization of dental alginate impression: Three-dimensional evaluation of point cloud.

Science.gov (United States)

Kim, So-Ri; Lee, Wan-Sun; Kim, Woong-Chul; Kim, Hea-Young; Kim, Ji-Hwan

2015-01-01

The purpose of this study was to evaluate the digitization of alginate impressions by analyzing differences between the scan data of two types of impressions (alginate and rubber) taken from the master die and the scan data for the master die. The master die and impressions were digitized using a dental laser scanner (7 series, Dental Wings, Montreal, Canada). The crown portion of the abutment teeth in the digital data of 20 impressions was divided into three regions: cervical surface, middle surface, and occlusal surface. An independent t-test showed a significant difference (palginate and rubber). One-way ANOVA and Tukey's honest significant difference test revealed a significant difference (palginate impressions in the future.

A Framework on Impression Management in Negotiation

DEFF Research Database (Denmark)

Mathiasen, Ditte Dahl; Esbjerg, Lars

2014-01-01

In this paper we develop a dramaturgical framework to provide us with a new understanding of how negotiators use impression management behaviour during the negotiation process to position themselves in an endeavour to reach a desirable outcome.......In this paper we develop a dramaturgical framework to provide us with a new understanding of how negotiators use impression management behaviour during the negotiation process to position themselves in an endeavour to reach a desirable outcome....

Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions.

Science.gov (United States)

Ghahremanloo, Ahmad; Seifi, Mahdieh; Ghanbarzade, Jalil; Abrisham, Seyyed Mohammad; Javan, Rashid Abdolah

2017-01-01

The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS). Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body) and direct and indirect techniques (six groups) were used, and seven impressions were obtained from each group (n=42). To measure the accuracy of impressions, drift, horizontal, and vertical angles of the implants, as well as the hex rotation of the implants in casts were evaluated using a digitizer device (1μm accuracy), in comparison with master arch. Data were analyzed using five-factor two-way ANOVA and Tukey's post-hoc test. The accuracy of impressions was assessed and the results showed that direct technique was not significantly different from indirect technique (P>0.05). Also, there were no significant differences between the mentioned viscosities except for the horizontal angle (P=0.006). Viscosity of impression materials is of high significance for the accuracy of dental impressions.

Accuracy evaluation of intraoral optical impressions: A clinical study using a reference appliance.

Science.gov (United States)

Atieh, Mohammad A; Ritter, André V; Ko, Ching-Chang; Duqum, Ibrahim

2017-09-01

Trueness and precision are used to evaluate the accuracy of intraoral optical impressions. Although the in vivo precision of intraoral optical impressions has been reported, in vivo trueness has not been evaluated because of limitations in the available protocols. The purpose of this clinical study was to compare the accuracy (trueness and precision) of optical and conventional impressions by using a novel study design. Five study participants consented and were enrolled. For each participant, optical and conventional (vinylsiloxanether) impressions of a custom-made intraoral Co-Cr alloy reference appliance fitted to the mandibular arch were obtained by 1 operator. Three-dimensional (3D) digital models were created for stone casts obtained from the conventional impression group and for the reference appliances by using a validated high-accuracy reference scanner. For the optical impression group, 3D digital models were obtained directly from the intraoral scans. The total mean trueness of each impression system was calculated by averaging the mean absolute deviations of the impression replicates from their 3D reference model for each participant, followed by averaging the obtained values across all participants. The total mean precision for each impression system was calculated by averaging the mean absolute deviations between all the impression replicas for each participant (10 pairs), followed by averaging the obtained values across all participants. Data were analyzed using repeated measures ANOVA (α=.05), first to assess whether a systematic difference in trueness or precision of replicate impressions could be found among participants and second to assess whether the mean trueness and precision values differed between the 2 impression systems. Statistically significant differences were found between the 2 impression systems for both mean trueness (P=.010) and mean precision (P=.007). Conventional impressions had higher accuracy with a mean trueness of 17.0 �

The Importance of Subtextual Impression Management and Business Faculty.

Science.gov (United States)

Chaney, Lillian H.; Lyden, Julie A.

1998-01-01

College students (n=265) reported their impressions of business faculty's personal appearance, body language, behavior, and office appearance. Findings indicate that impression management is useful for professors who want to convey credibility, authority, and interest in students. (JOW)

Production of a calcium silicate cement material from alginate impression material.

Science.gov (United States)

Washizawa, Norimasa; Narusawa, Hideaki; Tamaki, Yukimichi; Miyazaki, Takashi

2012-01-01

The purpose of this study was to synthesize biomaterials from daily dental waste. Since alginate impression material contains silica and calcium salts, we aimed to synthesize calcium silicate cement from alginate impression material. Gypsum-based investment material was also investigated as control. X-ray diffraction analyses revealed that although firing the set gypsum-based and modified investment materials at 1,200°C produced calcium silicates, firing the set alginate impression material did not. However, we succeeded when firing the set blend of pre-fired set alginate impression material and gypsum at 1,200°C. SEM observations of the powder revealed that the featured porous structures of diatomite as an alginate impression material component appeared useful for synthesizing calcium silicates. Experimentally fabricated calcium silicate powder was successfully mixed with phosphoric acid solution and set by depositing the brushite. Therefore, we conclude that the production of calcium silicate cement material is possible from waste alginate impression material.

Dimensional Changes of Alginate Dental Impression Materials-An Invitro Study.

Science.gov (United States)

Kulkarni, Manisha M; Thombare, Ram U

2015-08-01

Dentists are always looking ahead for more dimensionally stable material for accurate and successful fabrication of prosthesis in this competitive world. Arrival of newer materials and increased material market puts dentists in dilemma for selection of material. The study evaluated the effect of variations in time of pour and temperature on dimensional stability of three brands of commercially available alginates. Velplast, Marieflex & Zelgan alginate impression materials were evaluated by measuring dimensional accuracy of the master cast. A die was prepared and mounted on the apparatus for the ease of impression making. The prepared casts were categorized into five groups and made up of three brands of alginate impression material with variation in time of pour viz: immediate, 20&40 minutes interval and with varying temperature of 25(0)C, 30(0)C & 40(0)C. Impressions showed least distortion at varying degrees of temperature for 20 minutes, but the values obtained by storing of alginate impressions for 20 minutes at 30(0)C were found to be nearly accurate than the values obtained by storing of impression at 40(0)C. However, storing showed shrinkage of impressions. Marieflex showed better accuracy in comparison with other two materials. Maintenance of temperature and humidity play key role during storage & transport to prevent distortion. But the study suggests immediate pouring which will minimize the distortion. The manipulation instructions, temperature of mixing water, environment & water powder ratio also plays key role in minimizing the distortion.

Functional Impressions in Complete Denture and Overdenture Treatment

Directory of Open Access Journals (Sweden)

Hrvoje Kršek

2015-01-01

Full Text Available Tooth loss can cause loss of occlusal, masticatory, esthetic, physiognomic, phonetic and psychosocial function of patients. The most frequently used treatment method of completely edentulous patients and patients with a small number of remaining teeth are complete dentures or overdentures. One of the most important clinical and laboratory procedures in their fabrication is functional impression taking. The aim of this paper was to present procedures of taking functional impressions in fabrication of complete dentures and overdentures, using standardized techniques and materials. An accurate functional impression together with other correctly performed clinical and laboratory procedures ensure good retention and stability of dentures, which is a precondition for restoring patients’ lost functions.

Is there a correlation between physicians' clinical impressions and patients' perceptions of change? Use of the Perceived Change Scale with inpatients with mental disorders

Directory of Open Access Journals (Sweden)

Gabriela Pavan

Full Text Available Abstract Introduction: Assessment of the results of treatment for mental disorders becomes more complete when the patient's perspective is incorporated. Here, we aimed to evaluate the psychometric properties and application of the Perceived Change Scale - Patient version (PCS-P in a sample of inpatients with mental disorders. Methods: One hundred and ninety-one psychiatric inpatients answered the PCS-P and the Patients' Satisfaction with Mental Health Services Scale (SATIS and were evaluated in terms of clinical and sociodemographic data. An exploratory factor analysis (EFA was performed and internal consistency was calculated. The clinical impressions of the patient, family, and physician were correlated with the patient's perception of change. Results: The EFA indicated a psychometrically suitable four-factor solution. The PCS-P exhibited a coherent relationship with SATIS and had a Cronbach's alpha value of 0.856. No correlations were found between the physician's clinical global impression of improvement and the patient's perception of change, although a moderate positive correlation was found between the patients' clinical global impression of improvement and the change perceived by the patient. Conclusions: The PCS-P exhibited adequate psychometric proprieties in a sample of inpatients with mental disorders. The patient's perception of change is an important dimension for evaluation of outcomes in the treatment of mental disorders and differs from the physician's clinical impression of improvement. Evaluation of positive and negative perceptions of the various dimensions of the patient's life enables more precise consideration of the patient's priorities and interests.

Impression Management and the Control of Social Anxieties.

Science.gov (United States)

Miller, Rowland S.

Impression management refers to the concept that people engaged in interaction will attempt to control the image of themselves that others form. This provides a foundation for social interaction, giving others information about who we are and what to expect from us. A central concern of impression management is the manner in which we are evaluated…

A Paradigm shift in the concept for making dental impressions.

Science.gov (United States)

Nayar, Sanjna; Mahadevan, R

2015-04-01

Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By elimination of the everyday problems described above, there is no question that the significant advantages of digital impressions will make intraoral digital scanning standard procedure in most dental offices within the next several years. Furthermore, digital impressions have proven to reduce remakes and returns, as well as increase overall efficiency. The patient also benefits by being provided a far more positive experience. Finally, through the use of digital impression making, it has been determined that laboratory products become more consistent and require less chair time at insertion.

A Paradigm shift in the concept for making dental impressions

Directory of Open Access Journals (Sweden)

Sanjna Nayar

2015-01-01

Full Text Available Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By elimination of the everyday problems described above, there is no question that the significant advantages of digital impressions will make intraoral digital scanning standard procedure in most dental offices within the next several years. Furthermore, digital impressions have proven to reduce remakes and returns, as well as increase overall efficiency. The patient also benefits by being provided a far more positive experience. Finally, through the use of digital impression making, it has been determined that laboratory products become more consistent and require less chair time at insertion.

Work plan for testing silicone impression material and fixture on pool cell capsule

International Nuclear Information System (INIS)

Lundeen, J.E.

1994-01-01

The purpose of this work plan is to provide a safe procedure to test a cesium capsule impression fixture at Waste Encapsulation and Storage Facility (WESF). The impression will be taken with silicone dental impression material pressed down upon the capsule using the impression fixture. This test will evaluate the performance of the fixture and impression material under high radiation and temperature conditions on a capsule in a WESF pool cell

Extrusion-mixing compared with hand-mixing of polyether impression materials?

Science.gov (United States)

McMahon, Caroline; Kinsella, Daniel; Fleming, Garry J P

2010-12-01

The hypotheses tested were two-fold (a) whether altering the base:catalyst ratio influences working time, elastic recovery and strain in compression properties of a hand-mixed polyether impression material and (b) whether an extrusion-mixed polyether impression material would have a significant advantage over a hand-mixed polyether impression material mixed to the optimum base:catalyst ratio. The polyether was hand-mixed at the optimum (manufacturers recommended) base:catalyst ratios (7:1) and further groups were made by increasing or decreasing the catalyst length by 25%. Additionally specimens were also made from an extrusion-mixed polyether impression material and compared with the optimum hand-mixed base:catalyst ratio. A penetrometer assembly was used to measure the working time (n=5). Five cylindrical specimens for each hand-mixed and extrusion mixed group investigated were employed for elastic recovery and strain in compression testing. Hand-mixing polyether impression materials with 25% more catalyst than that recommended significantly decreased the working time while hand-mixing with 25% less catalyst than that recommended significantly increased the strain in compression. The extrusion-mixed polyether impression material provided similar working time, elastic recovery and strain in compression to the hand-mixed polyether mixed at the optimum base:catalyst ratio.

The public impression of radiation as a product of science communication

International Nuclear Information System (INIS)

Kim, Hak Soo; Ha, Hyo Suk; Oh, Mi Young; Choi, Jin Myeung

2008-01-01

The purpose of this study is to observe how the public impression of radiation is changing over the North Korea’s nuclear bomb test. We found that the nuclear bomb test brought more negative impressions of radiation, but, in one year, more positive ones prevailed as in the pre-bomb-test. Those positive impressions were found to be composed of useful and positive elements mostly relative to health care. This suggests that we need to apply radiation (fusion) technology to solving everyday life problems in order to bring more positive impressions of radiation

Three-dimensional accuracy of different impression techniques for dental implants

Directory of Open Access Journals (Sweden)

Mohammadreza Nakhaei

2015-01-01

Full Text Available Background: Accurate impression making is an essential prerequisite for achieving a passive fit between the implant and the superstructure. The aim of this in vitro study was to compare the three-dimensional accuracy of open-tray and three closed-tray impression techniques. Materials and Methods: Three acrylic resin mandibular master models with four parallel implants were used: Biohorizons (BIO, Straumann tissue-level (STL, and Straumann bone-level (SBL. Forty-two putty/wash polyvinyl siloxane impressions of the models were made using open-tray and closed-tray techniques. Closed-tray impressions were made using snap-on (STL model, transfer coping (TC (BIO model and TC plus plastic cap (TC-Cap (SBL model. The impressions were poured with type IV stone, and the positional accuracy of the implant analog heads in each dimension (x, y and z axes, and the linear displacement (ΔR were evaluated using a coordinate measuring machine. Data were analyzed using ANOVA and post-hoc Tukey tests (α = 0.05. Results: The ΔR values of the snap-on technique were significantly lower than those of TC and TC-Cap techniques (P < 0.001. No significant differences were found between closed and open impression techniques for STL in Δx, Δy, Δz and ΔR values (P = 0.444, P = 0.181, P = 0.835 and P = 0.911, respectively. Conclusion: Considering the limitations of this study, the snap-on implant-level impression technique resulted in more three-dimensional accuracy than TC and TC-Cap, but it was similar to the open-tray technique.

The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing qualities of impressions that may lead to occlusal discrepancies with indirect restorations.

Science.gov (United States)

Storey, D; Coward, T J

2014-03-01

There are few published studies that directly assess the quality of impressions for crowns and bridges in the UK. This paper considers aspects of impression quality with particular attention to factors causing potential occlusal discrepancies in the final restoration. To this end three dental laboratories were visited over a 3-month period. All impressions for conventional crown and bridgework that arrived on the days of the visits were examined and assessed against criteria defined on a custom-designed assessment form. A total of 206 impression cases were considered in this study. Flexible impression trays were used for 65% of working impressions. Their use was more common for NHS work than for private work. 31.9% of all alginate impressions examined were not adequately fixed to the tray. Visible contamination of impressions was not uncommon.

Impression management within the Zulu culture: Exploring tactics in the work context

OpenAIRE

Mtshelwane, Debrah; Nel, Jan Alewyn; Brink, Lizelle

2016-01-01

Orientation: Impression management tactics are utilised differently by people depending on the situation and the others around them. Research purpose: The purpose of the study was to identify the impression management tactics Zulu people display when they want to impress people in a work context. Motivation for this study: Organisations are competing for talented employees and people who contribute to the return on investment for the organisation. Individuals display impression tactic...

The influence of sequence of impressions on children's anxiety and discomfort.

Science.gov (United States)

Kaakko, Tarja; Horn, Michael T; Weinstein, Philip; Kaufman, Eliezer; Leggott, Penelope; Coldwell, Susan E

2003-01-01

Laboratory studies with adults and children have found lower pain reports when pain proceeds from high to low rather than from low to high. However, pediatric dentists often ease children into difficult procedures (from easiest to most difficult). This study investigated the influence of order during a clinical procedure that involved taking maxillary and mandibular alginate impressions. Subjects were 24 children aged 5 to 6 years (preoperational stage) and 24 children aged 9 to 10 years (concrete operational stage). Children were randomly assigned to either start with the mandibular (presumed to be easier) or start with the maxillary (presumed to be harder) impressions. Discomfort during the sequence of impressions was measured using the "Affective Facial Scale." A telephone interview was conducted 2 weeks later to evaluate the memory of discomfort. The results indicated that the older children who started with the mandibular (easier) impression and ended with the maxillary (more uncomfortable) impression reported significantly lower discomfort than older children who started with the maxillary impression and ended with the mandibular (Mann-Whitney U, Z = -2.08; P < .037). The same tendency was noted 2 weeks later on a telephone interview. By phone, 92% of the older children who started with the mandibular impression rated the sequence of impressions as "not at all bad," while only 58% of the older children who started with the maxillary impression rated the overall experience as "not at all bad" (chi2 = 3.56, P < .059). The younger children did not show any significant difference in their ratings of discomfort at either of the assessment periods. Consistent with clinical practice, this study observed that older children benefit from beginning an appointment with an easier procedure and working up to a more difficult one.

Trigeminal neuralgia secondary to basilar impression: A case report

Directory of Open Access Journals (Sweden)

Maurus Marques de Almeida Holanda

2015-01-01

Full Text Available We report a rare case of trigeminal neuralgia. A 23-year-old woman with a history of 1 year of typical trigeminal neuralgia manifested the characteristics of basilar impression. Magnetic resonance imaging (MRI demonstrated basilar impression, deformity of the posterior fossa with asymmetry of petrous bone, and compression of medulla oblongata in the topography of the odontoid apophysis. The operation was performed through a suboccipital craniectomy. The neuralgia disappeared after surgery and remains completely resolved until today. This is the second reported case of trigeminal neuralgia in a patient with basilar impression in Brazil.

Single Stage Silicone Border Molded Closed Mouth Impression Technique-Part II.

Science.gov (United States)

Solomon, E G R

2011-09-01

Functioning of a complete denture depends to a great extent on the impression technique. Several impression techniques have been described in the literature since the turn of this century when Greene [Clinical courses in dental prothesis, 1916] brothers introduced the first scientific system of recording dental impression. Advocates of each technique have their own claim of superiority over the other. The introduction of elastomeric impression materials [Skinner and Cooper, J Am Dent Assoc 51:523-536, 1955] has made possible new techniques of recording impression for complete denture construction. These rubber like materials are of two types; one has a polysulfide base and is popularily known as polysulfide rubber (Thiokol and Mercaptan). The other variety has a silicone base known as silicone rubber or silicone elastomer. Silicone elastomers are available in four different consistencies; a thin easy flowing light bodied material,a creamy medium bodied material, a highly viscous heavy bodied material and a kneadable putty material. This paper describes an active closed mouth impression technique with one stage border molding using putty silicone material as a substitute for low fusing compound.

Effect of Splinting on Dimensional Accuracy of Impressions Made of Implants with Different Subgingival Alignments.

Science.gov (United States)

Beyabanaki, Elaheh; Shamshiri, Ahmed Reza; Alikhasi, Marzieh; Monzavi, Abbas

2017-01-01

Placement of implants at deeper levels of gingiva is sometimes inevitable because of issues like esthetics or bone availability. The accuracy of impressions may be affected in these situations. The aim of this in vitro study was to evaluate the effects of splinting and length of impression copings on the accuracy of impressions made of deeply placed implants. A metal model with two parallel implants (Implantium; Dentium) was fabricated. One hundred and twenty impressions were made using the direct impression technique with and without splinting the impression copings (using short and long impression copings). Impressions were made of implants at three subgingival levels (1, 3, and 6 mm) using regular viscosity poly(vinyl siloxane). The impressions were poured with type IV dental stone. Displacements in the x, y, and z axes, as well as rotational discrepancies and interimplant distances were measured with a coordinate measuring machine. Data were analyzed with Kruskal-Wallis, Mann-Whitney, and nonparametric adjusted rank transform tests. There was less rotational displacement using longer impression copings at different subgingival positions of the implants, either with splinted or nonsplinted direct technique (p impressions at different apico-coronal levels of implants than the splinted technique using short impression copings (p impression copings yielded better results than shorter ones in both splinted and nonsplinted techniques. Also, nonsplinted short impression copings produced more accurate impressions than splinted short impression copings. © 2015 by the American College of Prosthodontists.

Impression Management in Survey Responding: Easier for Collectivists or Individualists?

Science.gov (United States)

Riemer, Hila; Shavitt, Sharon

2012-01-01

Three experiments indicate that when individualists and collectivists engage in impression management on self-reports, they do so through different psychological mechanism s. Collectivists do so through a relatively automatic process. Thus, they can impression manage even when cognitively busy. Individualists impression manage through a more effortful process. Therefore, they can do so only when the situation permits effortful processing. These findings highlight distinct conditions under which social norms may influence consumer self-reports across cultures. PMID:23175618

Impression Management in Survey Responding: Easier for Collectivists or Individualists?

Science.gov (United States)

Riemer, Hila; Shavitt, Sharon

2011-04-01

Three experiments indicate that when individualists and collectivists engage in impression management on self-reports, they do so through different psychological mechanism s. Collectivists do so through a relatively automatic process. Thus, they can impression manage even when cognitively busy. Individualists impression manage through a more effortful process. Therefore, they can do so only when the situation permits effortful processing. These findings highlight distinct conditions under which social norms may influence consumer self-reports across cultures.

Experimental study on the use of spacer foils in two-step putty and wash impression procedures using silicone impression materials.

Science.gov (United States)

Mann, Karsten; Davids, Andreas; Range, Ursula; Richter, Gert; Boening, Klaus; Reitemeier, Bernd

2015-04-01

The 2-step putty and wash impression technique is commonly used in fixed prosthodontics. However, cutting sluiceways to allow the light-body material to drain is time-consuming. A solution might be the use of a spacer foil. The purpose of this study was to evaluate the influence of spacer foil on the margin reproduction and dimensional accuracy of 2-step putty and wash impressions. Two methods of creating space for the wash material in a 2-step putty and wash impression were compared: the traditional cutout technique and a spacer foil. Eleven commercially available combinations of silicone impression materials were included in the study. The impressions and the cast production were carried out under standardized conditions. All casts were measured with a 3-dimensional (3D) coordinate measuring machine. Preparation margin reproduction and the diameters and spacing of the stone cast dies were measured (α=.05). The 2 methods showed significant differences (P<.05) in the reproduction of the preparation margins (complete reproduction cutout, 90% to 98%; foil, 74% to 91%). The use of a foil resulted in greater dimensional accuracy of the cast dies compared to the cutout technique. Cast dies from the cutout technique were significantly smaller than the metallic original cast (cutout median, 4.55 mm to 4.61 mm; foil median, 4.61 to 4.64). Spacing between the dies revealed only a few additional significant differences between the techniques. When spacer foils were used, dies were obtained that better corresponded to the original tooth. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Improvement of autism spectrum disorder symptoms in three children by using gastrin-releasing peptide.

Science.gov (United States)

Becker, Michele Michelin; Bosa, Cleonice; Oliveira-Freitas, Vera Lorentz; Goldim, José Roberto; Ohlweiler, Lygia; Roesler, Rafael; Schwartsmann, Gilberto; Riesgo, Rudimar Dos Santos

2016-01-01

To evaluate the safety, tolerability and potential therapeutic effects of gastrin-releasing peptide in three children with autistic spectrum disorder. Case series study with the intravenous administration of gastrin-releasing peptide in the dose of 160pmol/kg for four consecutive days. To evaluate the results, parental impressions the Childhood Autism Rating Scale (CARS) and the Clinical Global Impression (CGI) Scale. Each child underwent a new peptide cycle after two weeks. The children were followed for four weeks after the end of the infusions. The gastrin-releasing peptide was well tolerated and no child had adverse effects. Two children had improved social interaction, with a slight improvement in joint attention and the interaction initiatives. Two showed reduction of stereotypes and improvement in verbal language. One child lost his compulsion to bathe, an effect that lasted two weeks after each infusion cycle. Average reduction in CARS score was 2.8 points. CGI was "minimally better" in two children and "much better" in one. This study suggests that the gastrin-releasing peptide is safe and may be effective in improving key symptoms of autism spectrum disorder, but its results should be interpreted with caution. Controlled clinical trials-randomized, double-blinded, and with more children-are needed to better evaluate the possible therapeutic effects of gastrin-releasing peptide in autism. Copyright © 2016 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

Impression management and food intake. Current directions in research.

Science.gov (United States)

Vartanian, Lenny R

2015-03-01

This paper reviews recent research on consumption stereotypes (judgments of others based on what they eat) and impression management (modifying one's eating behavior in order to create a particular impression). A major recent focus in the literature has been on masculinity and meat eating, with research showing that meat is strongly associated with masculinity, and that individuals who follow a meat-based diet are perceived as more masculine than are individuals who follow a vegetarian diet. Although direct evidence for impression management through food intake remains sparse, a number of methodological approaches (including priming techniques and ecological valid assessments) are described that could be used in future research to identify the motives underlying people's eating behavior. Consumption stereotypes and impression management may be important influences on people's eating behavior, but the complexities of how, when, and for whom these factors influence food intake are still not well understood. Copyright © 2014 Elsevier Ltd. All rights reserved.

A double-blind, placebo-controlled study of the opiate antagonist, naltrexone, in the treatment of kleptomania.

Science.gov (United States)

Grant, Jon E; Kim, Suck Won; Odlaug, Brian L

2009-04-01

Kleptomania is a rare psychiatric disorder characterized by recurrent stealing and for which there exists no empirically validated treatments. This study examined the efficacy and tolerability of the opioid antagonist naltrexone in adults with kleptomania who have urges to steal. An 8-week, double-blind, placebo-controlled trial was conducted to evaluate the safety and efficacy of oral naltrexone for kleptomania. Twenty-five individuals with DSM-IV kleptomania were randomized to naltrexone (dosing ranging from 50 mg/day to 150 mg/day) or placebo. Twenty-three subjects (92%) completed the study. Subjects were assessed every 2 weeks with the Yale Brown Obsessive Compulsive Scale Modified for Kleptomania (K-YBOCS), the urge and behavior subscales of the K-YBOCS, the Kleptomania Symptom Assessment Scale (K-SAS), the Clinical Global Impressions Scale (CGI), and measures of depression, anxiety, and psychosocial functioning. Subjects assigned to naltrexone had significantly greater reductions in K-YBOCS total scores (p = .001), stealing urges (p = .032), and stealing behavior (p kleptomania severity (reflected in the CGI scores) (p kleptomania. Naltrexone was well tolerated.

Effect of Atomoxetine on the Cognitive Functions in Treatment of Attention Deficit Hyperactivity Disorder in Children with Congenital Hypothyroidism: A Pilot Study.

Science.gov (United States)

Yang, Rongwang; Gao, Weijia; Li, Rong; Zhao, Zhengyan

2015-04-19

With early initiation of thyroxine supplementation, children with congenital hypothyroidism (CH) retain some subtle deficits, such as attention and inhibitory control problems. This study assessed the effects of atomoxetine on cognitive functions in treatment of attention deficit hyperactivity disorder (ADHD) symptoms in children with CH. In a 6-month, open-labeled pilot study, 12 children were recruited and received atomoxetine. The measures of efficacy were scores on the Swanson, Nolan and Pelham Teacher and Parent Rating Scale, version IV (SNAP-IV) and Clinical Global Impression-Severity scale (CGI-S). The cognitive functions were evaluated with the Wechsler Intelligence Scale for Chinese Children, Digit Span, Wisconsin Card Sorting Test, and Stroop test. A statistically significant difference was found between the mean CGI-S and SNAP-IV scores before and after treatment (p Atomoxetine appears to be useful in improving ADHD symptoms, as well as cognitive functions, in children with CH. Larger, randomized, double-blinded, clinical trials are required to replicate these results. © The Author 2015. Published by Oxford University Press on behalf of CINP.

Effects of neurofeedback on adult patients with psychiatric disorders in a naturalistic setting.

Science.gov (United States)

Cheon, Eun-Jin; Koo, Bon-Hoon; Seo, Wan-Seok; Lee, Jun-Yeob; Choi, Joong-Hyeon; Song, Shin-Ho

2015-03-01

Few well-controlled studies have considered neurofeedback treatment in adult psychiatric patients. In this regard, the present study investigates the characteristics and effects of neurofeedback on adult psychiatric patients in a naturalistic setting. A total of 77 adult patients with psychiatric disorders participated in this study. Demographic data and neurofeedback states were retrospectively analyzed, and the effects of neurofeedback were evaluated using clinical global impression (CGI) and subjective self-rating scales. Depressive disorders were the most common psychiatric disorders (19; 24.7 %), followed by anxiety disorders (18; 23.4 %). A total of 69 patients (89.6 %) took medicine, and the average frequency of neurofeedback was 17.39 ± 16.64. Neurofeedback was applied to a total of 39 patients (50.6 %) more than 10 times, and 48 patients (62.3 %) received both β/SMR and α/θ training. The discontinuation rate was 33.8 % (26 patients). There was significant difference between pretreatment and posttreatment CGI scores (neurofeedback as an effective complimentary treatment for adult patients with psychiatric disorders.

Do first impressions count? Frailty judged by initial clinical impression predicts medium-term mortality in vascular surgical patients.

Science.gov (United States)

O'Neill, B R; Batterham, A M; Hollingsworth, A C; Durrand, J W; Danjoux, G R

2016-06-01

Recognising frailty during pre-operative assessment is important. Frail patients experience higher mortality rates and are less likely to return to baseline functional status following the physiological insult of surgery. We evaluated the association between an initial clinical impression of frailty and all-cause mortality in 392 patients attending our vascular pre-operative assessment clinic. Prevalence of frailty assessed by the initial clinical impression was 30.6% (95% CI 26.0-35.2%). There were 133 deaths in 392 patients over a median follow-up period of 4 years. Using Cox regression, adjusted for age, sex, revised cardiac risk index and surgery (yes/no), the hazard ratio for mortality for frail vs. not-frail was 2.14 (95% CI 1.51-3.05). The time to 20% mortality was 16 months in the frail group and 33 months in the not-frail group. The initial clinical impression is a useful screening tool to identify frail patients in pre-operative assessment. © 2016 The Association of Anaesthetists of Great Britain and Ireland.

Low Dose Radiation Response Curves, Networks and Pathways in Human Lymphoblastoid Cells Exposed from 1 to 10 cGy of Acute Gamma Radiation

Energy Technology Data Exchange (ETDEWEB)

Wyrobek, A. J.; Manohar, C. F.; Nelson, D. O.; Furtado, M. R.; Bhattacharya, M. S.; Marchetti, F.; Coleman, M.A.

2011-04-18

We investigated the low dose dependency of the transcriptional response of human cells to characterize the shape and biological functions associated with the dose response curve and to identify common and conserved functions of low dose expressed genes across cells and tissues. Human lymphoblastoid (HL) cells from two unrelated individuals were exposed to graded doses of radiation spanning the range of 1-10 cGy were analyzed by transcriptome profiling, qPCR and bioinformatics, in comparison to sham irradiated samples. A set of {approx}80 genes showed consistent responses in both cell lines; these genes were associated with homeostasis mechanisms (e.g., membrane signaling, molecule transport), subcellular locations (e.g., Golgi, and endoplasmic reticulum), and involved diverse signal transduction pathways. The majority of radiation-modulated genes had plateau-like responses across 1-10 cGy, some with suggestive evidence that transcription was modulated at doses below 1 cGy. MYC, FOS and TP53 were the major network nodes of the low-dose response in HL cells. Comparison our low dose expression findings in HL cells with those of prior studies in mouse brain after whole body exposure, in human keratinocyte cultures, and in endothelial cells cultures, indicates that certain components of the low dose radiation response are broadly conserved across cell types and tissues, independent of proliferation status.

Disinfection of Dental Impressions Prior to Handling at Muhimbili ...

African Journals Online (AJOL)

All four dental technicians who handled the received impressions were interviewed. Questions asked were on practice and attitudes and responses were on different point scales. Results are based on information gathered from the dental technicians. Results: Of the 1,453 impressions received none were reported to have ...

Impression management within the Zulu culture: Exploring tactics in the work context

Directory of Open Access Journals (Sweden)

Debrah Mtshelwane

2016-08-01

Full Text Available Orientation: Impression management tactics are utilised differently by people depending on the situation and the others around them. Research purpose: The purpose of the study was to identify the impression management tactics Zulu people display when they want to impress people in a work context. Motivation for this study: Organisations are competing for talented employees and people who contribute to the return on investment for the organisation. Individuals display impression tactics to influence the perceptions of others in the workplace, especially pertaining to performance appraisals and promotional opportunities. Research approach, design and method: The social constructivism paradigm was employed in conducting this study, following a phenomenological approach. The research sample consisted of 30 Zulu-speaking individuals from various organisations who were interviewed through semi-structured interviews. The researcher used thematic analysis to analyse the data. Main findings: The main findings in this study included impression management tactics that are used by Zulu people when attempting to impress people in the work context. The findings were divided into different categories (colleagues and supervisor. Conscientiousness,interpersonal amiability, openness and relational action are the themes that were reported as the most common impression management features people display at their workplace with colleagues. Themes that were reported when impressing a supervisor include conscientiousness,integrity, relational action and skilfulness. Practical/managerial implications: This study provides organisations with knowledge on the impression management tactics utilised by isiZulu employees. The nature of this information enables management to not misinterpret the use of certain tactics and will lead to more understanding and resilience by organisations and colleagues when working with isiZulu individuals. Contribution/value-add: This study

Dimensional Stability of Two Polyvinyl Siloxane Impression Materials in Different Time Intervals

Directory of Open Access Journals (Sweden)

Aalaei Sh

2015-12-01

Full Text Available Statement of the Problem: Dental prosthesis is usually made indirectly; there- fore dimensional stability of the impression material is very important. Every few years, new impression materials with different manufacturers’ claims regarding their better properties are introduced to the dental markets which require more research to evaluate their true dimensional changes. Objectives: The aim of this study was to evaluate dimensional stability of additional silicone impression material (Panasil® and Affinis® in different time intervals. Materials and Methods: In this experimental study, using two additional silicones (Panasil® and Affinis®, we made sixty impressions of standard die in similar conditions of 23 °C and 59% relative humidity by a special tray. The die included three horizontal and two vertical lines that were parallel. The vertical line crossed the horizontal ones at a point that served as reference for measurement. All impressions were poured with high strength dental stone. The dimensions were measured by stereo-microscope by two examiners in three interval storage times (1, 24 and 168 hours.The data were statistically analyzed using t-test and ANOVA. Results: All of the stone casts were larger than the standard die. Dimensional changes of Panasil and Affinis were 0.07%, 0.24%, 0.27% and 0.02%, 0.07%, 0.16% after 1, 24 and 168 hours, respectively. Dimensional change for two impression materials wasn’t significant in the interval time, expect for Panasil after one week (p = 0.004. Conclusions: According to the limitations of this study, Affinis impressions were dimensionally more stable than Panasil ones, but it was not significant. Dimensional change of Panasil impression showed a statistically significant difference after one week. Dimensional changes of both impression materials were based on ADA standard limitation in all time intervals (< 0.5%; therefore, dimensional stability of this impression was accepted at least

Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis.

Science.gov (United States)

Jamshidy, Ladan; Mozaffari, Hamid Reza; Faraji, Payam; Sharifi, Roohollah

2016-01-01

Introduction . One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods . A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with two-stage technique using an appropriate tray. To measure the marginal gap, the distance between the restoration margin and preparation finish line of plaster dies was vertically determined in mid mesial, distal, buccal, and lingual (MDBL) regions by a stereomicroscope using a standard method. Results . The results of independent test showed that the mean value of the marginal gap obtained by one-stage impression technique was higher than that of two-stage impression technique. Further, there was no significant difference between one- and two-stage impression techniques in mid buccal region, but a significant difference was reported between the two impression techniques in MDL regions and in general. Conclusion . The findings of the present study indicated higher accuracy for two-stage impression technique than for the one-stage impression technique.

A metric study of insole foot impressions in footwear of identical twins.

Science.gov (United States)

Nirenberg, Michael S; Krishan, Kewal; Kanchan, Tanuj

2017-11-01

Foot impressions are of utmost importance in crime scene investigations. Foot impressions are available in the form of barefoot prints, sock-clad footprints, and as impressions within footwear. Sometimes suspects leave their footwear at the crime scene, and the insole of this footwear may contain the foot impression of the suspect which may be important evidence linking him or her to the crime. The task of identification based on the analysis of footprints can be challenging when the footprints belonging to one of the identical twin is available for examination. The present study is based on the quantitative measures of the foot impressions in the footwear of adult identical twins. The study was conducted on four sets of female monozygotic twins from the United States of America. A total of 17 length and breadth measurements were taken on each foot impression. A combination of Reel Method and Extended Gunn Method was utilized to produce the measurements. The measurements of the foot impressions were compared among the twins on the right and the left side. Differences were found in the various footprint measurements among the twins. The study's sample size was not large enough to apply robust statistical tests, but the study is significant in that it presents the first detailed comparative analysis of a large number of measurements of insole foot impressions of adult twins. The observations derived from the study are likely to assist forensic investigations in cases involving the foot impressions of the twins. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Precision of guided scanning procedures for full-arch digital impressions in vivo.

Science.gov (United States)

Zimmermann, Moritz; Koller, Christina; Rumetsch, Moritz; Ender, Andreas; Mehl, Albert

2017-11-01

System-specific scanning strategies have been shown to influence the accuracy of full-arch digital impressions. Special guided scanning procedures have been implemented for specific intraoral scanning systems with special regard to the digital orthodontic workflow. The aim of this study was to evaluate the precision of guided scanning procedures compared to conventional impression techniques in vivo. Two intraoral scanning systems with implemented full-arch guided scanning procedures (Cerec Omnicam Ortho; Ormco Lythos) were included along with one conventional impression technique with irreversible hydrocolloid material (alginate). Full-arch impressions were taken three times each from 5 participants (n = 15). Impressions were then compared within the test groups using a point-to-surface distance method after best-fit model matching (OraCheck). Precision was calculated using the (90-10%)/2 quantile and statistical analysis with one-way repeated measures ANOVA and post hoc Bonferroni test was performed. The conventional impression technique with alginate showed the lowest precision for full-arch impressions with 162.2 ± 71.3 µm. Both guided scanning procedures performed statistically significantly better than the conventional impression technique (p Cerec Omnicam Ortho were 74.5 ± 39.2 µm and for group Ormco Lythos 91.4 ± 48.8 µm. The in vivo precision of guided scanning procedures exceeds conventional impression techniques with the irreversible hydrocolloid material alginate. Guided scanning procedures may be highly promising for clinical applications, especially for digital orthodontic workflows.

Impression Procedures for Metal Frame Removable Partial Dentures as Applied by General Dental Practitioners.

Science.gov (United States)

Fokkinga, Wietske A; van Uchelen, Judith; Witter, Dick J; Mulder, Jan; Creugers, Nico H J

2016-01-01

This pilot study analyzed impression procedures for conventional metal frame removable partial dentures (RPDs). Heads of RPD departments of three dental laboratories were asked to record features of all incoming impressions for RPDs during a 2-month period. Records included: (1) impression procedure, tray type (stock/custom), impression material (elastomer/alginate), use of border-molding material (yes/no); and (2) RPD type requested (distal-extension/tooth-bounded/combination). Of the 132 total RPD impressions, 111 (84%) involved custom trays, of which 73 (55%) were combined with an elastomer. Impression border-molding material was used in 4% of the cases. Associations between impression procedure and RPD type or dentists' year/university of graduation were not found.

Functional Impressions in Complete Denture and Overdenture Treatment

OpenAIRE

Hrvoje Kršek; Nikša Dulčić

2015-01-01

Tooth loss can cause loss of occlusal, masticatory, esthetic, physiognomic, phonetic and psychosocial function of patients. The most frequently used treatment method of completely edentulous patients and patients with a small number of remaining teeth are complete dentures or overdentures. One of the most important clinical and laboratory procedures in their fabrication is functional impression taking. The aim of this paper was to present procedures of taking functional impressions in fab...

Predictors of switching from mania to depression in a large observational study across Europe (EMBLEM).

Science.gov (United States)

Vieta, Eduard; Angst, Jules; Reed, Catherine; Bertsch, Jordan; Haro, Josep Maria

2009-11-01

The risk of switching from mania to depression in bipolar disorder has been poorly studied. Large observational studies may be useful in identifying variables that predict switch to depression after mania and provide data on medication use and outcomes in "real world" patients. EMBLEM (European Mania in Bipolar Longitudinal Evaluation of Medication) is a 2-year, prospective, observational study of patients with a manic/mixed episode. Symptom severity measures included Clinical Global Impression-Bipolar Disorder scale (CGI-BP), Young Mania Rating Scale (YMRS) and 5-item Hamilton Depression Rating Scale. Switching was defined using CGI-BP mania and depression such that patients changed from manic and not depressed to depressed but not manic over two consecutive observations within the first 12 weeks of follow-up. Cox proportional hazards models identified baseline variables independently associated with switch to depression. Of 2390 patients who participated in the maintenance phase (i.e. up to 24 months), 120 (5.0%) switched to depression within the first 12 weeks. Factors associated with greater switching to depression include previous depressive episodes, substance abuse, greater CGI-BP overall severity and benzodiazepine use. Factors associated with lower switching rates were greater CGI-BP depression, lower YMRS severity and atypical antipsychotic use. The definition of switching biased against patients with mixed episodes being likely to switch. Strictly defined, switch to depression from mania occurs in a small proportion of bipolar patients. Clinical history, illness severity, co-morbidities and treatment patterns are associated with switching to depression. Atypical antipsychotics may protect against switch to depression.

Young Mania Rating Scale: how to interpret the numbers? Determination of a severity threshold and of the minimal clinically significant difference in the EMBLEM cohort.

Science.gov (United States)

Lukasiewicz, Michael; Gerard, Stephanie; Besnard, Adeline; Falissard, Bruno; Perrin, Elena; Sapin, Helene; Tohen, Mauricio; Reed, Catherine; Azorin, Jean-Michel

2013-03-01

The aim of this analysis was to identify Young Mania Rating Scale (YMRS) meaningful benchmarks for clinicians (severity threshold, minimal clinically significant difference [MCSD]) using the Clinical Global Impressions Bipolar (CGI-BP) mania scale, to provide a clinical perspective to randomized clinical trials (RCTs) results. We used the cohort of patients with acute manic/mixed state of bipolar disorders (N = 3459) included in the European Mania in Bipolar Longitudinal Evaluation of Medication (EMBLEM) study. A receiver-operating characteristic analysis was performed on randomly selected patients to determine the YMRS optimal severity threshold with CGI-BP mania score ≥ "Markedly ill" defining severity. The MCSD (clinically meaningful change in score relative to one point difference in CGI-BP mania for outcome measures) of YMRS, was assessed with a linear regression on baseline data. At baseline, YMRS mean score was 26.4 (±9.9), CGI-BP mania mean score was 4.8 (±1.0) and 61.7% of patients had a score ≥ 5. The optimal YMRS severity threshold of 25 (positive predictive value [PPV] = 83.0%; negative predictive value [NPV] = 66.0%) was determined. In this cohort, a YMRS score of 20 (typical cutoff for RCTs inclusion criteria) corresponds to a PPV of 74.6% and to a NPV of 77.6%, meaning that the majority of patients included would be classified as severely ill. The YMRS minimal clinically significant difference was 6.6 points. Copyright © 2013 John Wiley & Sons, Ltd.

Evaluation of oral scanning in comparison to impression using three-dimensional registration

Science.gov (United States)

Brogle-Kim, Yur-Chung; Deyhle, Hans; Müller, Bert; Schulz, Georg; Bormann, Therese; Beckmann, Felix; Jäger, Kurt

2012-10-01

Crown and bridge restorations are one of the main treatment methods in fixed prosthodontics. The fabrication requires data on the patient's denture shape. This information is generally obtained as a hard copy from an impression mold. Alternatively, one can acquire the data electronically using oral optical three-dimensional (3D) imaging techniques, which determine the surface of the denture. The aim of the study was to quantitatively compare the accuracy of three dimensional scanning with that of conventional impressions and give a statement how far the scanner provides a clinical alternative with equal or better precision. Data from 10 teeth were acquired in the dental office with a polyether impression material and an oral scanner. Data from the impressions were digitalized by means of micro computed tomography. The data were then 3D registered to identify the potential differences between impression and optical scan. We could demonstrate that the oral scanner's data and the conventional impressions are comparable.

Interpretation of appearance: the effect of facial features on first impressions and personality

DEFF Research Database (Denmark)

Wolffhechel, Karin Marie Brandt; Fagertun, Jens; Jacobsen, Ulrik Plesner

2014-01-01

Appearance is known to influence social interactions, which in turn could potentially influence personality development. In this study we focus on discovering the relationship between self-reported personality traits, first impressions and facial characteristics. The results reveal that several...... personality traits can be read above chance from a face, and that facial features influence first impressions. Despite the former, our prediction model fails to reliably infer personality traits from either facial features or first impressions. First impressions, however, could be inferred more reliably from...... facial features. We have generated artificial, extreme faces visualising the characteristics having an effect on first impressions for several traits. Conclusively, we find a relationship between first impressions, some personality traits and facial features and consolidate that people on average assess...

Collection of Wet-Origin Footwear Impressions on Various Surfaces Using an Electrostatic Dust Print Lifter.

Science.gov (United States)

Hong, Sungwook; Park, Miseon

2018-01-19

Electrostatic dust print lift method is known to be able to recover only dry-origin footwear impression. However, the wet-origin footwear impression could also be recovered using this method. As the amount of dust accumulated before deposition of the wet-origin footwear impression increased, the intensity of the footwear impression lifted with this method became stronger. If the footwear impression is not affected by moisture after it is made, the 28-h old wet-origin footwear impression could be recovered using this method. The intensity of the lifted footwear impression did not decrease significantly even when the number of sequential steps increased as long as the shoe sole is wet. However, when the moisture on the shoe sole depleted, the intensity of the footwear impression decreased sharply. This method has the advantage of being able to enhance the footwear impression without being affected by the footwear impressions deposited in the past. © 2018 American Academy of Forensic Sciences.

Tolerability and efficacy of paliperidone ER compared to olanzapine in the treatment of schizophrenia: A randomized, double-blind, multicentric trial

Directory of Open Access Journals (Sweden)

Sandip Shah

2011-01-01

Full Text Available Background: Paliperidone is an active metabolite of risperidone and actss through a combination of central dopamine Type 2 (D2 and serotonin Type 2 (5HT2A receptor antagonism. Aim: The present randomized, double-blind, multicentric trial was designed to determine the safety and efficacy of paliperidone extended release (ER compared to olanzapine in the treatment of acute schizophrenia. Materials and Methods: A total of 214 patients with diagnosis of schizophrenia were randomized to paliperidone ER (n=109 and olanzapine (n=106 treatment groups. Totally 206 patients were evaluated for efficacy parameters using Positive and negative syndrome scale (PANSS score and Clinical Global Impression-severity of illness (CGI-S and Clinical Global Impression-improvement of illness (CGI-I scales. Safety was assessed by treatment-emergent adverse events and movement disorders. Results: All patients showed significant reduction in PANSS scores at the end of treatment. However, the results were comparable and there was no significant difference at the end of the trial between paliperidone ER group and olanzapine group. Both the treatment groups showed decrease in the severity of illness and improvement in symptomatology. The most common adverse events reported in paliperidone ER versus olanzapine group were Extra Pyramidal Syndrome (EPS (13.7% vs. 15.6%, headache (12.7% vs. 8.9%, increased appetite (8.8% vs. 10.0% and drowsiness (4.9% vs. 303%. There was no clinically relevant difference in change from baseline to the end of the trial in abnormal involuntary movement scale (AIMS and barnes akathisia rating scale (BARS total scores between both the groups. Conclusion: Paliperidone ER is effective in controlling schizophrenic symptoms as well as exhibits comparable tolerability profile. Thus, paliperidone ER has the potential to be a useful new treatment option for patients with schizophrenia.

Quality of life, self-stigma, and hope in schizophrenia spectrum disorders: a cross-sectional study.

Science.gov (United States)

Vrbova, Kristyna; Prasko, Jan; Ociskova, Marie; Kamaradova, Dana; Marackova, Marketa; Holubova, Michaela; Grambal, Ales; Slepecky, Milos; Latalova, Klara

2017-01-01

The aim of this study was to explore the quality of life, self-stigma, personality traits, and hope in patients with schizophrenia spectrum disorders. A total of 52 outpatients participated in this cross-sectional study. The attending psychiatrist assessed each patient with Mini International Neuropsychiatric Interview (MINI). The patients then completed Quality of Life Satisfaction and Enjoyment Questionnaire (Q-LES-Q), Internalized Stigma of Mental Illness (ISMI) Scale, Temperament and Character Inventory - Revised (TCI-R), Adult Dispositional Hope Scale (ADHS), Drug Attitude Inventory 10 (DAI-10), and Liebowitz Social Anxiety Scale (LSAS)-Self-report. The psychiatrist evaluated Clinical Global Impression Severity - the objective version (objCGI-S), and the patients completed the Clinical Global Impression Severity - the subjective version (subjCGI-S). Each participant also completed Beck Depression Inventory-II (BDI-II), and Beck Anxiety Inventory (BAI). The quality of life was significantly higher in employed patients and individuals with higher hope, self-directedness (SD), and persistence (PS). The quality of life was lower among patients with higher number of psychiatric hospitalizations, those with higher severity of the disorder, and individuals who were taking higher doses of antipsychotics. Patients with more pronounced symptoms of depression, anxiety, and social anxiety had a lower quality of life. Finally, the quality of life was lower among individuals with higher harm avoidance (HA) and self-stigmatization (ISMI). Backward stepwise regression was applied to identify the most significant factors connected to self-stigma. The regression analysis showed that occupation, level of depression (BDI-II), attitude to using medication (DAI-10), social anxiety (LSAS), and antipsychotic index were the most relevant factors associated with lower quality of life. Detection of the quality of life in the context of personality traits, hope, self-stigma, and

Rapid response to methylphenidate as an add-on therapy to mirtazapine in the treatment of major depressive disorder in terminally ill cancer patients: a four-week, randomized, double-blinded, placebo-controlled study.

Science.gov (United States)

Ng, Chong Guan; Boks, Marco P M; Roes, Kit C B; Zainal, Nor Zuraida; Sulaiman, Ahmad Hatim; Tan, Seng Beng; de Wit, Niek J

2014-04-01

This is a 4 week, randomized, double-blind, placebo-controlled study to examine the effects of methylphenidate as add-on therapy to mirtazapine compared to placebo for treatment of depression in terminally ill cancer patients. It involved 88 terminally ill cancer patients from University of Malaya Medical Centre, Kuala Lumpur, Malaysia. They were randomized and treated with either methylphenidate or placebo as add on to mirtazapine. The change in Montgomery-Åsberg Depression Rating Scale (MADRS) score from baseline to day 3 was analyzed by linear regression. Changes of MADRS and Clinical Global Impression-Severity Scale (CGI-S) over 28 days were analyzed using mixed model repeated measures (MMRM). Secondary analysis of MADRS response rates, defined as 50% or more reduction from baseline score. A significantly larger reduction of Montgomery-Åsberg Depression Rating Scale (MADRS) score in the methylphenidate group was observed from day 3 (B=4.14; 95% CI=1.83-6.45). Response rate (defined as 50% or more reduction from baseline MADRS score) in the methylphenidate treated group was superior from day 14. Improvement in Clinical Global Impression-Severity Scale (CGI-S) was greater in the methylphenidate treated group from day 3 until day 28. The drop-out rates were 52.3% in the methylphenidate group and 59.1% in the placebo group (relative risk=0.86, 95%CI=0.54-1.37) due to cancer progression. Nervous system adverse events were more common in methylphenidate treated subjects (20.5% vs 9.1%, p=0.13). In conclusions, methylphenidate as add on therapy to mirtazapine demonstrated an earlier antidepressant response in terminally ill cancer patients, although at an increased risk of the nervous system side effects. Copyright © 2014 Elsevier B.V. and ECNP. All rights reserved.

Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis

Directory of Open Access Journals (Sweden)

Ladan Jamshidy

2016-01-01

Full Text Available Introduction. One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods. A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with two-stage technique using an appropriate tray. To measure the marginal gap, the distance between the restoration margin and preparation finish line of plaster dies was vertically determined in mid mesial, distal, buccal, and lingual (MDBL regions by a stereomicroscope using a standard method. Results. The results of independent test showed that the mean value of the marginal gap obtained by one-stage impression technique was higher than that of two-stage impression technique. Further, there was no significant difference between one- and two-stage impression techniques in mid buccal region, but a significant difference was reported between the two impression techniques in MDL regions and in general. Conclusion. The findings of the present study indicated higher accuracy for two-stage impression technique than for the one-stage impression technique.

In vivo evaluation of inter-operator reproducibility of digital dental and conventional impression techniques.

Directory of Open Access Journals (Sweden)

Emi Kamimura

Full Text Available The aim of this study was to evaluate and compare the inter-operator reproducibility of three-dimensional (3D images of teeth captured by a digital impression technique to a conventional impression technique in vivo.Twelve participants with complete natural dentition were included in this study. A digital impression of the mandibular molars of these participants was made by two operators with different levels of clinical experience, 3 or 16 years, using an intra-oral scanner (Lava COS, 3M ESPE. A silicone impression also was made by the same operators using the double mix impression technique (Imprint3, 3M ESPE. Stereolithography (STL data were directly exported from the Lava COS system, while STL data of a plaster model made from silicone impression were captured by a three-dimensional (3D laboratory scanner (D810, 3shape. The STL datasets recorded by two different operators were compared using 3D evaluation software and superimposed using the best-fit-algorithm method (least-squares method, PolyWorks, InnovMetric Software for each impression technique. Inter-operator reproducibility as evaluated by average discrepancies of corresponding 3D data was compared between the two techniques (Wilcoxon signed-rank test.The visual inspection of superimposed datasets revealed that discrepancies between repeated digital impression were smaller than observed with silicone impression. Confirmation was forthcoming from statistical analysis revealing significantly smaller average inter-operator reproducibility using a digital impression technique (0.014± 0.02 mm than when using a conventional impression technique (0.023 ± 0.01 mm.The results of this in vivo study suggest that inter-operator reproducibility with a digital impression technique may be better than that of a conventional impression technique and is independent of the clinical experience of the operator.

In vivo evaluation of inter-operator reproducibility of digital dental and conventional impression techniques

Science.gov (United States)

Kamimura, Emi; Tanaka, Shinpei; Takaba, Masayuki; Tachi, Keita; Baba, Kazuyoshi

2017-01-01

Purpose The aim of this study was to evaluate and compare the inter-operator reproducibility of three-dimensional (3D) images of teeth captured by a digital impression technique to a conventional impression technique in vivo. Materials and methods Twelve participants with complete natural dentition were included in this study. A digital impression of the mandibular molars of these participants was made by two operators with different levels of clinical experience, 3 or 16 years, using an intra-oral scanner (Lava COS, 3M ESPE). A silicone impression also was made by the same operators using the double mix impression technique (Imprint3, 3M ESPE). Stereolithography (STL) data were directly exported from the Lava COS system, while STL data of a plaster model made from silicone impression were captured by a three-dimensional (3D) laboratory scanner (D810, 3shape). The STL datasets recorded by two different operators were compared using 3D evaluation software and superimposed using the best-fit-algorithm method (least-squares method, PolyWorks, InnovMetric Software) for each impression technique. Inter-operator reproducibility as evaluated by average discrepancies of corresponding 3D data was compared between the two techniques (Wilcoxon signed-rank test). Results The visual inspection of superimposed datasets revealed that discrepancies between repeated digital impression were smaller than observed with silicone impression. Confirmation was forthcoming from statistical analysis revealing significantly smaller average inter-operator reproducibility using a digital impression technique (0.014± 0.02 mm) than when using a conventional impression technique (0.023 ± 0.01 mm). Conclusion The results of this in vivo study suggest that inter-operator reproducibility with a digital impression technique may be better than that of a conventional impression technique and is independent of the clinical experience of the operator. PMID:28636642

Developing the Perfect Pitch: Creating a Positive First Impression through Social Media

Science.gov (United States)

Edmiston, Dawn

2016-01-01

Too often we take for granted first impressions and how others perceive us, but such perceptions frequently form the basis for personal and professional success. Today, many first impressions are made online through search engine results and social networks. To ensure that students make a positive first impression, this teaching innovation…

Self-stigma and treatment effectiveness in patients with anxiety disorders – a mediation analysis

Directory of Open Access Journals (Sweden)

Ociskova M

2018-01-01

Full Text Available Marie Ociskova,1 Jan Prasko,1 Kristyna Vrbova,1 Petra Kasalova,1 Michaela Holubova,1 Ales Grambal,1 Klara Machu2 1Department of Psychiatry, Faculty of Medicine and Dentistry, Palacky University, University Hospital, Olomouc, 2Department of Psychology, Faculty of Arts, University of Ostrava, Ostrava, The Czech Republic Goal: The goal of this study was to explore the impact of self-stigma on the treatment outcomes in patients with anxiety disorders and to find possible mediators of this relationship. Method: Two hundred and nine patients with anxiety disorders, who were hospitalized in a psychotherapeutic department, attended the study. The average age was 39.2±12.4 years; two-thirds were women. Most of the patients used a long-term medication. The participants underwent either cognitive behavioral therapy (CBT or short psychodynamic therapy. The selection to the psychotherapy was not randomized. All individuals completed several scales – Beck Depression Inventory, the second edition (BDI-II, Beck Anxiety Inventory (BAI, Dissociative Experience Scale (DES, Sheehan Disability Scale (SDS, subjective Clinical Global Impression (subjCGI, and The Internalized Stigma of Mental Illness Scale (ISMI. A senior psychiatrist filled out the objective CGI (objCGI. Results: The patients significantly improved in the severity of anxiety (BAI, depression (BDI-II, and overall severity of the mental disorder (objCGI. The self-stigma predicted a lower change of the objCGI, but not a change of the anxiety and depressive symptoms severity. Anxiety, depressive symptoms, dissociation, and disability were assessed as possible mediators of the relationship between the self-stigma and the treatment change. None of them were significant. Conclusion: Self-stigma lowers the effectiveness of the combined treatment of anxiety disorders. Future research should explore other possible mediators influencing this relationship. Keywords: self-stigma, anxiety disorders, treatment

Social desirability scales as indicators of self-enhancement and impression management.

Science.gov (United States)

Parmač Kovačić, Maja; Galić, Zvonimir; Jerneić, Željko

2014-01-01

This article presents 2 studies testing Paulhus's (2002) assumption that unconscious self-enhancement and conscious impression management represent separate processes of socially desirable responding (SDR) that can be observed within 2 content domains (egoistic and moralistic bias). In Study 1, we devised egoistic and moralistic SDR scales intended to measure self-enhancement in honest responding and impression management under demands for positive self-presentation. In Study 2, we correlated scores on these scales with external indicators of self-enhancement and impression management. In honest responding, both SDR scales most strongly correlated with self-enhancement indicators, whereas under demands for positive self-presentation they correlated more strongly with external measures of impression management.

Methylphenidate for Apathy in Community-Dwelling Older Veterans With Mild Alzheimer's Disease: A Double-Blind, Randomized, Placebo-Controlled Trial.

Science.gov (United States)

Padala, Prasad R; Padala, Kalpana P; Lensing, Shelly Y; Ramirez, Daniel; Monga, Varun; Bopp, Melinda M; Roberson, Paula K; Dennis, Richard A; Petty, Frederick; Sullivan, Dennis H; Burke, William J

2018-02-01

Apathy is a common behavioral problem in Alzheimer's disease. Apathy has profound consequences, such as functional impairment, higher service utilization, higher caregiver burden, and increased mortality. The authors' objective was to study the effects of methylphenidate on apathy in Alzheimer's disease. A 12-week, prospective, double-blind, randomized, placebo-controlled trial (methylphenidate versus placebo) was conducted in community-dwelling veterans (N=60) with mild Alzheimer's disease. The primary outcome for apathy (Apathy Evaluation Scale-Clinician) and secondary outcomes for cognition (Mini-Mental State Examination, Modified Mini-Mental State Examination), functional status (activities of daily living, instrumental activities of daily living), improvement and severity (Clinical Global Impressions Scale [CGI]), caregiver burden (Zarit Burden Scale), and depression (Cornell Scale for Depression in Dementia) were measured at baseline and at 4, 8, and 12 weeks. Participants were all men (77 years old, SD=8). After adjusting for baseline, the methylphenidate group had significantly greater improvement in apathy than the placebo group at 4 weeks, 8 weeks, and 12 weeks. At 12 weeks, there was also greater improvement in cognition, functional status, caregiver burden, CGI scores, and depression in the methylphenidate group compared with the placebo group. Methylphenidate improved apathy in a group of community-dwelling veterans with mild Alzheimer's disease. Methylphenidate also improved cognition, functional status, caregiver burden, CGI scores, and depression.

Management of excessive movable tissue: a modified impression technique.

Science.gov (United States)

Shum, Michael H C; Pow, Edmond H N

2014-08-01

Excessive movable tissue is a challenge in complete denture prosthetics. A modified impression technique is presented with polyvinyl siloxane impression material and a custom tray with relief areas and perforations in the area of the excessive movable tissue. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Facial first impressions and partner preference models: Comparable or distinct underlying structures?

Science.gov (United States)

South Palomares, Jennifer K; Sutherland, Clare A M; Young, Andrew W

2017-12-17

Given the frequency of relationships nowadays initiated online, where impressions from face photographs may influence relationship initiation, it is important to understand how facial first impressions might be used in such contexts. We therefore examined the applicability of a leading model of verbally expressed partner preferences to impressions derived from real face images and investigated how the factor structure of first impressions based on potential partner preference-related traits might relate to a more general model of facial first impressions. Participants rated 1,000 everyday face photographs on 12 traits selected to represent (Fletcher, et al. 1999, Journal of Personality and Social Psychology, 76, 72) verbal model of partner preferences. Facial trait judgements showed an underlying structure that largely paralleled the tripartite structure of Fletcher et al.'s verbal preference model, regardless of either face gender or participant gender. Furthermore, there was close correspondence between the verbal partner preference model and a more general tripartite model of facial first impressions derived from a different literature (Sutherland et al., 2013, Cognition, 127, 105), suggesting an underlying correspondence between verbal conceptual models of romantic preferences and more general models of facial first impressions. © 2017 The British Psychological Society.

Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions

OpenAIRE

Ghahremanloo, Ahmad; Seifi, Mahdieh; Ghanbarzade, Jalil; Abrisham, Seyyed Mohammad; Javan, Rashid Abdolah

2017-01-01

Objectives: The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS).Materials and Methods: Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body) and direct and indirect techniques (six groups) were used, and seven impressions...

Effects of Inconsistent Behaviors on Person Impressions: A Multidimensional Study.

Science.gov (United States)

Vonk, Roos

1995-01-01

Examined effects of unexpected behavioral information on person impressions. Inconsistency was manipulated with respect to Implicit Personality Theory. Found that behaviors with inconsistent evaluation implications did not affect impressions and that effects of inconsistent information depended on dimension of contrast, valence of initial…

21 CFR 872.3661 - Optical Impression Systems for CAD/CAM.

Science.gov (United States)

2010-04-01

... of sensor and a computer with software. (b) Classification. Class II (Special Controls). The device... entitled “Class II Special Controls Guidance Document: Optical Impression Systems for Computer Assisted.../CAM. (a) Identification. An optical impression system for computer assisted design and manufacturing...

Accuracy of different impression materials in parallel and nonparallel implants

Directory of Open Access Journals (Sweden)

Mahroo Vojdani

2015-01-01

Conclusion: Within the limitations of this study, in parallel conditions, the type of impression material cannot affect the accuracy of the implant impressions; however, in nonparallel conditions, polyvinyl siloxane is shown to be a better choice, followed by vinyl siloxanether and polyether respectively.

Three-dimensional accuracy of plastic transfer impression copings for three implant systems.

Science.gov (United States)

Teo, Juin Wei; Tan, Keson B; Nicholls, Jack I; Wong, Keng Mun; Uy, Joanne

2014-01-01

The purpose of this study was to compare the three-dimensional accuracy of indirect plastic impression copings and direct implant-level impression copings from three implant systems (Nobel Biocare [NB], Biomet 3i [3i], and Straumann [STR]) at three interimplant buccolingual angulations (0, 8, and 15 degrees). Two-implant master models were used to simulate a three-unit implant fixed partial denture. Test models were made from Impregum impressions using direct implant-level impression copings (DR). Abutments were then connected to the master models for impressions using the plastic impression copings (INDR) at three different angulations for a total of 18 test groups (n = 5 in each group). A coordinate measuring machine was used to measure linear distortions, three-dimensional (3D) distortions, angular distortions, and absolute angular distortions between the master and test models. Three-way analysis of variance showed that the implant system had a significant effect on 3D distortions and absolute angular distortions in the x- and y-axes. Interimplant angulation had a significant effect on 3D distortions and absolute angular distortions in the y-axis. Impression technique had a significant effect on absolute angular distortions in the y-axis. With DR, the NB and 3i systems were not significantly different. With INDR, 3i appeared to have less distortion than the other systems. Interimplant angulations did not significantly affect the accuracy of NBDR, 3iINDR, and STRINDR. The accuracy of INDR and DR was comparable at all interimplant angulations for 3i and STR. For NB, INDR was comparable to DR at 0 and 8 degrees but was less accurate at 15 degrees. Three-dimensional accuracy of implant impressions varied with implant system, interimplant angulation, and impression technique.

Exposure to low doses (20 cGy) of Hze results in spatial memory impairment in rats.

Science.gov (United States)

Britten, Richard; Johnson, Angela; Davis, Leslie; Green-Mitchell, Shamina; Chabriol, Olivia; Sanford, Larry; Drake, Richard

INTRODUCTION. Current models predict that the astronauts on a mission to a deep space destination, such as Mars, will be exposed to 25 cGy of Galactic cosmic radiation (GCR). The long-term consequence of exposure to such doses is largely unknown, but given that 1.3 Gy of X-rays has been reported to lead to long-term cognitive deficits (Shore et al, 1976) and that CGR have an RBE of 2-5, it is likely that the predicted 25 cGy of GCR will lead to defects in the cognitive ability of the astronauts during and after the mission. Our studies are designed to help define the GCR dose that will lead to defects in complex working memory, and also to elucidate the mechanisms whereby hadronic radiation diminishes neurocognitive function. The identification of such processes would provide an opportunity for post-mission surveillance, and hopefully will lead to intervention strategies that will ameliorate or attenuate GCR-induced neurocognitive deficits. MATERIALS METHODS. Four-week old male Wistar rats were exposed to either X-rays or 1 GeV 56Fe. At three or six months post exposure the performance of the rats in the Barnes' Maze (Spatial memory) was established. The duration and frequency of REM sleep was also monitored to determine if the neurocognitive deficits arose due to reduced memory consolidation as a result of diminished REM sleep. We used a novel, but maturing technique, called MALDI-MS imaging (or MALDI-MSI), to identify specific regions of the brain where the neuroproteome differs in rats that have developed spatial memory impairments. RESULTS. 11.5 Gy of X-rays led to reduced performance in the Barnes's maze. In contrast, exposure to 20 cGy of Hze (1 GeV 56Fe) resulted in a significant impairment of spatial memory performance as measured in the Barnes' Maze, which was manifested by an increase in relative escape latency REL over a 5 day testing period. Such an increase in REL could arise from the rats becoming less able, or perhaps less willing, to locate the

Antimicrobial Property of Hydrocolloid Impression Material Incorporated with Silver Nanoparticles Against Staphylococcus Aureus

Directory of Open Access Journals (Sweden)

Wangchuk Norbu Penden

2017-01-01

Full Text Available Dental impressions can easily become contaminated with patient’s blood and saliva which are capable of transmitting infectious diseases to dental personnel. The addition of antimicrobial agents into impression materials could be effective in reducing the chances of cross-infection. Silver nanoparticles have been applied in dentistry as a potent antimicrobial agent. This study aims to evaluate the in vitro antimicrobial efficacy of silver nanoparticles incorporated to irreversible hydrocolloid impression material against Staphylococcus aureus. Silver nanoparticles (AgZrPO4, National Direct Network Company, Thailand at concentrations of 0.25%, 0.50%, 1.00% and 1.50% w/w were added to powder of impression materials (Kromopan, Lascod, Ilaty. Impression material samples were prepared on sterile plate in accordance with manufacturer’s instruction. After setting, a 100 microliter of S. aureus ATCC6538 suspension (106 cells/mL were inoculated on the surface of the impression sample and left for 10 minutes. The amount of S. aureus on the surface was quantified using imprint technique on Mannitol Salt agar. Impression materials incorporated with AgZrPO4 showed antimicrobial property against S. aureus (up to 95% reduction compared with control (impression material without AgZrPO4. Even though the mechanism of antimicrobial action was not clearly understood, AgZrPO4 incorporated to impression material was demonstrated to possess an inhibitory effect against pathogenic bacteria. Further studies are needed to investigate physical properties of the material and the clinical usage.

Digital versus conventional impressions for fixed prosthodontics: A systematic review and meta-analysis.

Science.gov (United States)

Chochlidakis, Konstantinos M; Papaspyridakos, Panos; Geminiani, Alessandro; Chen, Chun-Jung; Feng, I Jung; Ercoli, Carlo

2016-08-01

Limited evidence is available for the marginal and internal fit of fixed dental restorations fabricated with digital impressions compared with those fabricated with conventional impressions. The purpose of this systematic review was to compare marginal and internal fit of fixed dental restorations fabricated with digital techniques to those fabricated using conventional impression techniques and to determine the effect of different variables on the accuracy of fit. Medline, Cochrane, and EMBASE databases were electronically searched and enriched by hand searches. Studies evaluating the fit of fixed dental restorations fabricated with digital and conventional impression techniques were identified. Pooled data were statistically analyzed, and factors affecting the accuracy of fit were identified, and their impact on accuracy of fit outcomes were assessed. Dental restorations fabricated with digital impression techniques exhibited similar marginal misfit to those fabricated with conventional impression techniques (P>.05). Both marginal and internal discrepancies were greater for stone die casts, whereas digital dies produced restorations with the smallest discrepancies (Pdigital impression was used to generate stereolithographic (SLA)/polyurethane dies, misfit values were intermediate. The fabrication technique, the type of restoration, and the impression material had no effect on misfit values (P>.05), whereas die and restoration materials were statistically associated (Pdigital impression technique provided better marginal and internal fit of fixed restorations than conventional techniques did. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Accuracy of different abutment level impression techniques in All-On-4 dental implants

Directory of Open Access Journals (Sweden)

Marzieh Alikhasi

2012-01-01

Full Text Available Background and Aims: Passive fit of prosthetic frameworks is a major concern in implant dentistry. Impression technique is one of the several variables that may affect the outcome of dental implants. The purpose of this study was to compare the three dimensional accuracy of direct and indirect abutment level implant impressions ofALL-ON-4 treatment plan.Materials and Methods: A reference acrylic resin model with four Branemark fixtures was made according to All-On-4 treatment plan. Multiunit abutments were screwed into the fixtures and two special trays were made for direct and indirect impression techniques. Ten direct and ten indirect impression techniques with respective impression transfers were made. Impressions were poured with stone and the positional accuracy of the abutment analogues in each dimension of x, y, and z axes and also angular displacement (Δθ were evaluated using a Coordinate Measuring Machine (CMM. Data were analyzed using T- test.Results: The results showed that direct impression technique was significantly more accurate than indirect technique (P<0.001.Conclusion: The results showed that the accuracy of direct impression technique was significantly more than that of indirect technique in Δθ and Δr coordinate and also Δx, Δy, Δz.

In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions.

Science.gov (United States)

Ender, Andreas; Attin, Thomas; Mehl, Albert

2016-03-01

Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; digitized scannable vinylsiloxanether, VSES-D; and irreversible hydrocolloid, ALG) and 7 digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; Lava COS, LAV; Lava True Definition Scanner, T-Def; 3Shape Trios, TRI; and 3Shape Trios Color, TRC) techniques. Impressions were made 3 times each in 5 participants (N=15). The impressions were then compared within and between the test groups. The cast surfaces were measured point-to-point using the signed nearest neighbor method. Precision was calculated from the (90%-10%)/2 percentile value. The precision ranged from 12.3 μm (VSE) to 167.2 μm (ALG), with the highest precision in the VSE and VSES groups. The deviation pattern varied distinctly according to the impression method. Conventional impressions showed the highest accuracy across the complete dental arch in all groups, except for the ALG group. Conventional and digital impression methods differ significantly in the complete-arch accuracy. Digital impression systems had higher local deviations within the complete arch cast; however, they achieve equal and higher precision than some conventional impression materials. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Digitization of simulated clinical dental impressions: virtual three-dimensional analysis of exactness.

Science.gov (United States)

Persson, Anna S K; Odén, Agneta; Andersson, Matts; Sandborgh-Englund, Gunilla

2009-07-01

To compare the exactness of simulated clinical impressions and stone replicas of crown preparations, using digitization and virtual three-dimensional analysis. Three master dies (mandibular incisor, canine and molar) were prepared for full crowns, mounted in full dental arches in a plane line articulator. Eight impressions were taken using an experimental monophase vinyl polysiloxane-based material. Stone replicas were poured in type IV stone (Vel-Mix Stone; Kerr). The master dies and the stone replicas were digitized in a touch-probe scanner (Procera) Forte; Nobel Biocare AB) and the impressions in a laser scanner (D250, 3Shape A/S), to create virtual models. The resulting point-clouds from the digitization of the master dies were used as CAD-Reference-Models (CRM). Discrepancies between the points in the pointclouds and the corresponding CRM were measured by a matching-software (CopyCAD 6.504 SP2; Delcam Plc). The distribution of the discrepancies was analyzed and depicted on color-difference maps. The discrepancies of the digitized impressions and the stone replicas compared to the CRM were of similar size with a mean+/-SD within 40microm, with the exception of two of the digitized molar impressions. The precision of the digitized impressions and stone replicas did not differ significantly (F=4.2; p=0.053). However, the shape affected the digitization (F=5.4; p=0.013) and the interaction effect of shape and digitization source (impression or stone replica) was pronounced (F=28; pimpressions varied with shape. Both impressions and stone replicas can be digitized repeatedly with a high reliability.

At face value: Visual antecedents of impression formation in servicescapes

NARCIS (Netherlands)

Verhoeven, J.W.M.; van Rompay, Thomas Johannes Lucas; Pruyn, Adriaan T.H.; Mc.Gill, Ann L.; Shavitt, Sharon

2009-01-01

Consumers may base employee impressions on physical appearance and displayed personal objects. In a scenario experiment, using photos of a physician and a 360-degree panorama of his consultation room, we examined the effects of appearance and tangibles on impression formation. Study 1 shows that

Strategies for managing impressions of racial identity in the workplace.

Science.gov (United States)

Roberts, Laura Morgan; Cha, Sandra E; Kim, Sung Soo

2014-10-01

This article deepens understanding of the workplace experiences of racial minorities by investigating racial identity-based impression management (RIM) by Asian American journalists. Racial centrality, directly or indirectly, predicted the use of 4 RIM strategies (avoidance, enhancement, affiliation, and racial humor). Professional centrality also predicted strategy use, which was related to life satisfaction and perceived career success. By shedding light on proactive strategies that individuals use to influence colleagues' impressions of their racial identity, we contribute to research on diversity in organizations, impression management, and racial identity. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

A Comparison of implant impression precision: Different materials and techniques

Science.gov (United States)

Tabesh, Mahtab; Alikhasi, Marzieh

2018-01-01

Background Precision of implant impressions is a prerequisite for long-term success of implant supported prostheses. Impression materials and impression techniques are two important factors that impression precision relies on. Material and Methods A model of edentulous maxilla containing four implants inserted by All-on-4 guide was constructed. Seventy two impressions using polyether (PE), polyvinyl siloxane (PVS), and vinyl siloxanether (VSE) materials with direct and indirect techniques were made (n=12). Coordinates of implants in casts were measured using coordinate measuring machine (CMM). Data were analyzed with ANOVA; t-test and Tukey test were used for post hoc. Results With two-way ANOVA, mean values of linear displacements of implants were significantly different among materials and techniques. One-way ANOVA and Tukey showed significant difference between PE and VSE (P=0.019), PE and PVS (P=0.002) in direct technique, and between PVS and PE (Pimpression of implants, PE is recommended for direct technique while PE and VSE are recommended for indirect technique. Recommended technique for VSE is either direct or indirect; and for PE and PVS is direct. Key words:Polyvinyl siloxane, polyether, vinyl siloxanether, direct technique, indirect technique, All-on-4, coordinate measuring machine. PMID:29670733

Dinosaur Impressions

Science.gov (United States)

Taquet, Philippe

1998-09-01

Perhaps you are a paleontologist or have always wondered what it is like to be one. Or you are fascinated by fossils and like to read about the origins and natural history of dinosaurs. Or maybe you are an avid traveler and reader of travelogues. If you are any of these things, then this book is for you. Originally published in 1994 in French, Dinosaur Impressions is the engaging account of thirty years of travel and paleontological exploration by Philippe Taquet, one of the world's most noted paleontologists. Dr. Taquet takes the reader on a surprisingly far-flung tour ranging from the Provence countryside to the Niger desert, from the Brazilian bush to the Mongolian Steppes, and from the Laos jungle to the Moroccan mountains in search of dinosaur bones and what they have to tell us about a vanished world. With wry humor and lively anecdotes, Dr. Taquet retraces the history of paleontological research, along the way discussing the latest theories of dinosaur existence and extinction. Elegantly translated by Kevin Padian, Dinosaur Impressions provides a unique, thoughtful perspective not often encountered in American- and English-language works. This insightful, first-hand account of an exceptional career is also a travelogue par excellence that will enthrall enthusiasts and general readers alike. Philippe Taquet is the Director of the National Museum of Natural History in Paris and is a member of the French Academy of Sciences. Kevin Padian is a professor in the Department of Integrative Biology and Curator of the Museum of Paleontology at the University of California, Berkeley. He is also the editor of The Beginning of the Age of Dinosaurs (Cambridge, 1986) and The Encyclopedia of Dinosaurs (1997).

SRIM Scheme: An Impression-Management Scheme for Privacy-Aware Photo-Sharing Users

Directory of Open Access Journals (Sweden)

Fenghua Li

2018-02-01

Full Text Available With the development of online social networks (OSNs and modern smartphones, sharing photos with friends has become one of the most popular social activities. Since people usually prefer to give others a positive impression, impression management during photo sharing is becoming increasingly important. However, most of the existing privacy-aware solutions have two main drawbacks: ① Users must decide manually whether to share each photo with others or not, in order to build the desired impression; and ② users run a high risk of leaking sensitive relational information in group photos during photo sharing, such as their position as part of a couple, or their sexual identity. In this paper, we propose a social relation impression-management (SRIM scheme to protect relational privacy and to automatically recommend an appropriate photo-sharing policy to users. To be more specific, we have designed a lightweight face-distance measurement that calculates the distances between users’ faces within group photos by relying on photo metadata and face-detection results. These distances are then transformed into relations using proxemics. Furthermore, we propose a relation impression evaluation algorithm to evaluate and manage relational impressions. We developed a prototype and employed 21 volunteers to verify the functionalities of the SRIM scheme. The evaluation results show the effectiveness and efficiency of our proposed scheme. Keywords: Impression management, Relational privacy, Photo sharing, Policy recommendation, Proxemics

Effect of different impression materials and techniques on the dimensional accuracy of implant definitive casts.

Science.gov (United States)

Ebadian, Behnaz; Rismanchian, Mansor; Dastgheib, Badrosadat; Bajoghli, Farshad

2015-01-01

Different factors such as impression techniques and materials can affect the passive fit between the superstructure and implant. The aim of this study was to determine the effect of different impression materials and techniques on the dimensional accuracy of implant definitive casts. Four internal hex implants (Biohorizons Ø4 mm) were placed on a metal maxillary model perpendicular to the horizontal plane in maxillary lateral incisors, right canine and left first premolar areas. Three impression techniques including open tray, closed tray using ball top screw abutments and closed tray using short impression copings and two impression materials (polyether and polyvinyl siloxane) were evaluated (n = 60). The changes in distances between implant analogues in mediolateral (x) and anteroposterior (y) directions and analogue angles in x/z and y/z directions in the horizontal plane on the definitive casts were measured by coordinate measuring machine. The data were analyzed by multivariate two-way analysis of variance and one sample t-test (α = 0.05). No statistical significant differences were observed between different impression techniques and materials. However, deviation and distortion of definitive casts had a significant difference with the master model when short impression copings and polyvinyl siloxane impression material were used (P impression materials (P impression techniques; however, less distortion and deviation were observed in the open tray technique. In the closed tray impression technique, ball top screw was more accurate than short impression copings.

Microbiological evaluation of ultrasonic nebulization for disinfecting dental impressions.

Science.gov (United States)

Mendonca, Marcio Jose; Rafael, Renata Santos; Camilotti, Veridiana; Menolli, Rafael Andrade; Sicoli, Eliseu Augusto; Teixeira, Nancielli; Sinhoreti, Mario Alexandre Coelho

2013-07-01

Disinfecting dental impressions is necessary to decrease the risk of cross-contamination in dental offices. Ultrasonic nebulization has been mentioned as a microbicidal technique that can be used to disinfect contaminated dental impressions. This study compared the microbicidal effect of 2% glutaraldehyde and 0.2% peracetic acid for the disinfection of dental impressions made with vinyl polysiloxane, using 2 disinfection methods: immersion and ultrasonic nebulization. Bactericial efficacy was examined using Staphylococcus aureus and Bacillus atrophaeus as indicators. Thirty impressions were obtained and distributed randomly in 5 groups (n = 6). Group 1 was immersed in 2% glutaraldehyde immersion for 10 minutes, Group 2 was immersed in 0.2% peracetic acid for 10 minutes, Group 3 underwent ultrasonic nebulization for 10 minutes in 2% glutaraldehyde solution, Group 4 underwent ultrasonic nebulization for 10 minutes in 0.2% peracetic acid solution, and Group 5 was a control group that received no disinfectant. Both solutions experienced a 100% reduction in microorganisms following ultrasonic nebulization, as did peracetic acid following immersion; however, immersion in glutaraldehyde demonstrated lower values of reduction in B atrophaeus group, with a statistically significant difference compared with the other experimental groups.

Does aging impair first impression accuracy? Differentiating emotion recognition from complex social inferences.

Science.gov (United States)

Krendl, Anne C; Rule, Nicholas O; Ambady, Nalini

2014-09-01

Young adults can be surprisingly accurate at making inferences about people from their faces. Although these first impressions have important consequences for both the perceiver and the target, it remains an open question whether first impression accuracy is preserved with age. Specifically, could age differences in impressions toward others stem from age-related deficits in accurately detecting complex social cues? Research on aging and impression formation suggests that young and older adults show relative consensus in their first impressions, but it is unknown whether they differ in accuracy. It has been widely shown that aging disrupts emotion recognition accuracy, and that these impairments may predict deficits in other social judgments, such as detecting deceit. However, it is unclear whether general impression formation accuracy (e.g., emotion recognition accuracy, detecting complex social cues) relies on similar or distinct mechanisms. It is important to examine this question to evaluate how, if at all, aging might affect overall accuracy. Here, we examined whether aging impaired first impression accuracy in predicting real-world outcomes and categorizing social group membership. Specifically, we studied whether emotion recognition accuracy and age-related cognitive decline (which has been implicated in exacerbating deficits in emotion recognition) predict first impression accuracy. Our results revealed that emotion recognition accuracy did not predict first impression accuracy, nor did age-related cognitive decline impair it. These findings suggest that domains of social perception outside of emotion recognition may rely on mechanisms that are relatively unimpaired by aging. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Turn Management or Impression Management?

NARCIS (Netherlands)

ter Maat, Mark; Heylen, Dirk K.J.; Ruttkay, Z.M.; Kipp, M.; Nijholt, Antinus; Vilhjálmsson, H.H.

2009-01-01

We look at how some basic choices in the management of turns influence the impression that people get from an agent. We look at scales concerning personality, emotion and interpersonal stance. We do this by a person perception study, or rather an agent perception study, using simulated conversations

Six-month open-label follow-up of risperidone long-acting injection use in pediatric bipolar disorder.

Science.gov (United States)

Boarati, Miguel A; Wang, Yuan-Pang; Ferreira-Maia, Ana Paula; Cavalcanti, Ana Rosa S; Fu-I, Lee

2013-01-01

Recent studies suggest that risperidone long-acting injection (RLAI) may be considered for controlling mood episodes in bipolar disorder patients who have relapsed due to medication nonadherence or failure to respond to standard therapies. Currently, no study has reported the usefulness of RLAI in youths with bipolar disorder. The aim of this study was to evaluate short-term effects of RLAI in the naturalistic treatment of early-onset bipolar disorder and its role in symptomatic remission and adherence to treatment. Nineteen early-onset bipolar disorder outpatients receiving RLAI were observed in a 6-month naturalistic study at the outpatient clinic of the Child and Adolescent Affective Disorders Program at the Institute of Psychiatry of the University of São Paulo, São Paulo, Brazil. All patients met DSM-IV criteria for bipolar disorder. Clinical response to RLAI was evaluated using the Children's Global Assessment Scale (CGAS) and Clinical Global Impressions scale (CGI) across 3 time periods: index time (T0), 8 weeks after (T1), and 24 weeks after (T2). These subjects were recruited from May 2008 to December 2009. Patients receiving RLAI presented considerable improvement in global functioning (CGAS: T0 = 20.6; T1 = 42.9; and T2 = 49.2) and clinical severity (CGI: T0 = 5.9; T1 = 3.9; and T2 = 3.4). Global CGI mean scores of clinical improvement were 2.2 at T1 and 2.4 at T2. There were no significant changes in laboratory measurements and weight throughout follow-up. RLAI was shown to be an alternative treatment for youths with bipolar disorder failing to respond to prior medication trials or with adherence problems. Further blind, randomized controlled studies are necessary to confirm these initial findings. Sistema Nacional de Informaçōes Sobre Ética em Pesquisa Envolvendo Seres Humanos-Commisão Nacional de Ética em Pesquisa identifier: CAAE 0709.0.015.000-06.

Selling oneself: construct and criterion-related validity of impression management in structured interviews

NARCIS (Netherlands)

Kleinmann, M.; Klehe, U.-C.

2010-01-01

Interviewee impression management has been a long-standing concern in the interview literature. Yet recent insights into the impact of impression management on interviewee performance in structured interviews suggest that interviewee impression management may be more than just a source of bias and a

Effect of Time on Gypsum-Impression Material Compatibility

Science.gov (United States)

Won, John Boram

The purpose of this study was to evaluate the compatibility of dental gypsum with three recently introduced irreversible hydrocolloid (alginate) alternatives. The test materials were Alginot® (Kerr™), Position Penta Quick® (3M ESPE™) and Silgimix ® (Sultan Dental™). The irreversible hydrocolloid impression material, Jeltrate Plus antimicrobial® (Dentsply Caulk™) served as the control. Materials and Methods: Testing of materials was conducted in accordance with ANSI/ADA Specification No. 18 for Alginate Impression Materials. Statistical Analysis: The 3-Way ANOVA test was used to analyze measurements between different time points at a significance level of (p Outcome: It was found that there was greater compatibility between gypsum and the alternative materials over time than the traditional irreversible hydrocolloid material that was tested. A statistically significant amount of surface change/incompatibility was found over time with the combination of the dental gypsum products and the control impression material (Jeltrate Plus antimicrobial®).

Observing and Understanding Children's Social Interactions. An Impression Management Perspective.

Science.gov (United States)

Hatch, J. Amos

1994-01-01

Describes ways of observing and interpreting children's peer social behavior based on the impression management perspective, which focuses on the social construction of a child's individual self-concept. Suggests that teachers and caregivers can use impression management strategies to observe and promote prosocial development in young children.…

Impression Management by Association: Construction and Validation of a Scale.

Science.gov (United States)

Andrews, Martha C.; Kacmar, K. Michele

2001-01-01

Impression management (managing associations with others to create a favorable impression) using such tactics as boasting, blurring, blaring, and burying was examined using factor and validity analyses of data from the Image Management by Association Scale. The scale satisfactorily represented the four tactics, although burying and blaring needed…

Evaluation of digital model accuracy and time-dependent deformation of alginate impressions.

Science.gov (United States)

Cesur, M G; Omurlu, I K; Ozer, T

2017-09-01

The aim of this study was to evaluate the accuracy of digital models produced with the three-dimensional dental scanner, and to test the dimensional stability of alginate impressions for durations of immediately (T0), 1 day (T1), and 2 days (T2). A total of sixty impressions were taken from a master model with an alginate, and were poured into plaster models in three different storage periods. Twenty impressions were directly scanned (negative digital models), after which plaster models were poured and scanned (positive digital models) immediately. The remaining 40 impressions were poured after 1 and 2 days. In total, 9 points and 11 linear measurements were used to analyze the plaster models, and negative and positive digital models. Time-dependent deformation of the alginate impressions and the accuracy of the conventional plaster models and digital models were evaluated separately. Plaster models, negative and positive digital models showed significant differences in nearly all measurements at T (0), T (1), and T (2) times (P 0.05), but they demonstrated statistically significant differences at T (2) time (P impressions is practicable method for orthodontists.

Effects of disinfection of combined agar/alginate impressions on the dimensional accuracy of stone casts.

Science.gov (United States)

Hiraguchi, Hisako; Nakagawa, Hisami; Kaketani, Masahiro; Hirose, Hideharu; Nishiyama, Minoru

2007-05-01

This study investigated the effects of disinfection of combined agar/alginate impressions on the dimensional accuracy of resultant stone casts. Impressions of a master cast designed to simulate an abutment tooth were prepared by combining each of two brands of cartridge-form agar impression materials with an alginate impression material. The impressions were immersed in 1% sodium hypochlorite for 10 minutes or 2% glutaraldehyde for 30 minutes. The remaining impressions were sprayed with these two disinfectants and then stored in sealed bags for 10, 30, 60, and 120 minutes. Stone casts obtained from the non-disinfected impressions were also prepared as control. Changes in diameter of the stone casts were then measured. Results indicated that storage for 10 minutes after spraying with 1% sodium hypochlorite was an appropriate disinfection method for combined agar/alginate impressions, as well as immersion in 1% sodium hypochlorite for 10 minutes.

Forming impressions: effects of facial expression and gender stereotypes.

Science.gov (United States)

Hack, Tay

2014-04-01

The present study of 138 participants explored how facial expressions and gender stereotypes influence impressions. It was predicted that images of smiling women would be evaluated more favorably on traits reflecting warmth, and that images of non-smiling men would be evaluated more favorably on traits reflecting competence. As predicted, smiling female faces were rated as more warm; however, contrary to prediction, perceived competence of male faces was not affected by facial expression. Participants' female stereotype endorsement was a significant predictor for evaluations of female faces; those who ascribed more strongly to traditional female stereotypes reported the most positive impressions of female faces displaying a smiling expression. However, a similar effect was not found for images of men; endorsement of traditional male stereotypes did not predict participants' impressions of male faces.

Impression Management in Social Media: The Example of LinkedIn

Directory of Open Access Journals (Sweden)

Joanna Paliszkiewicz

2016-09-01

Full Text Available Nowadays, the relationships are often initiated and maintained in online environments, the formation and management of online impressions have gained importance and become the subject of numerous studies. The impression management is a conscious process in which people attempt to influence the perceptions of their image. They do it by controlling and managing information presented in social media. The presentation of identity is the key to success or failure for example in business life. In the article, the critical literature review related to impression management in social media is described. The example of the way of self-presentation in LinkedIn is presented. The future directions are indicated.

Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision.

Science.gov (United States)

Ender, Andreas; Mehl, Albert

2013-02-01

A new approach to both 3-dimensional (3D) trueness and precision is necessary to assess the accuracy of intraoral digital impressions and compare them to conventionally acquired impressions. The purpose of this in vitro study was to evaluate whether a new reference scanner is capable of measuring conventional and digital intraoral complete-arch impressions for 3D accuracy. A steel reference dentate model was fabricated and measured with a reference scanner (digital reference model). Conventional impressions were made from the reference model, poured with Type IV dental stone, scanned with the reference scanner, and exported as digital models. Additionally, digital impressions of the reference model were made and the digital models were exported. Precision was measured by superimposing the digital models within each group. Superimposing the digital models on the digital reference model assessed the trueness of each impression method. Statistical significance was assessed with an independent sample t test (α=.05). The reference scanner delivered high accuracy over the entire dental arch with a precision of 1.6 ±0.6 µm and a trueness of 5.3 ±1.1 µm. Conventional impressions showed significantly higher precision (12.5 ±2.5 µm) and trueness values (20.4 ±2.2 µm) with small deviations in the second molar region (PDigital impressions were significantly less accurate with a precision of 32.4 ±9.6 µm and a trueness of 58.6 ±15.8µm (Pdigital models were visible across the entire dental arch. The new reference scanner is capable of measuring the precision and trueness of both digital and conventional complete-arch impressions. The digital impression is less accurate and shows a different pattern of deviation than the conventional impression. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Sulcus reproduction with elastomeric impression materials: a new in vitro testing method.

Science.gov (United States)

Finger, Werner J; Kurokawa, Rie; Takahashi, Hidekazu; Komatsu, Masashi

2008-12-01

Aim of this study was to investigate the depth reproduction of differently wide sulci with elastomeric impression materials by single- and double-mix techniques using a tooth and sulcus model, simulating clinical conditions. Impressions with one vinyl polysiloxane (VPS; FLE), two polyethers (PE; IMP and P2), and one hybrid VPS/PE elastomer (FUS) were taken from a truncated steel cone with a circumferential 2 mm deep sulcus, 50, 100 or 200 microm wide. The "root surface" was in steel and the "periodontal tissue" in reversible hydrocolloid. Single-mix impressions were taken with light-body (L) or monophase (M) pastes, double-mix impressions with L as syringe and M or heavy-body (H) as tray materials (n=8). Sulcus reproduction was determined by 3D laser topography of impressions at eight locations, 45 degrees apart. Statistical data analysis by ANOVA and multiple comparison tests (pimpression materials only: FLE=IMP>FUS=P2. At 50 and 100 microm width, significant differences were found between materials (IMP>FUS=FLE>P2) and techniques (L+H=L+M>M>L). The sulcus model is considered useful for screening evaluation of elastomeric impression materials ability to reproduce narrow sulci. All tested materials and techniques reproduced 200 microm wide sulci to almost nominal depth. Irrespective of the impression technique used, IMP showed the best penetration ability in 50 and 100 microm sulci. Double-mix techniques are more suitable to reproduce narrow sulci than single-mix techniques.

Supervised team management, with or without structured psychotherapy, in heavy users of a mental health service with borderline personality disorder: a two-year follow-up preliminary randomized study

Directory of Open Access Journals (Sweden)

Amianto Federico

2011-11-01

Full Text Available Abstract Background Individuals affected by severe Borderline Personality Disorder (BPD are often heavy users of Mental Health Services (MHS. Short-term treatments currently used in BPD therapy are useful to target disruptive behaviors but they are less effective in reducing heavy MHS use. Therefore, alternative short-term treatments, less complex than long-term psychodynamic psychotherapies but specifically oriented to BPD core problems, need to be developed to reduce MHS overuse. This study aimed to evaluate the efficacy of adding Sequential Brief Adlerian Psychodynamic Psychotherapy (SB-APP to Supervised Team Management (STM in BPD treatment compared to STM alone in a naturalistic group of heavy MHS users with BPD. Effectiveness was evaluated 6 times along a two-year follow-up. Methods Thirty-five outpatients who met inclusion criteria were randomly assigned to two treatment groups (STM = 17; SB-APP = 18 and then compared. Clinical Global Impression (CGI and CGI-modified (CGI-M for BPD, Global Assessment of Functioning (GAF, State-Trait Anger Expression Inventory (STAXI, and Symptom Checklist-90 Revised (SCL-90-R were administered at T1, T3, T6, T12, T18 and T24. At T12 the Working Alliance Inventory-Short Form (WAI-S was also completed. At the one-year follow-up, SB-APP group did not receive any additional individual psychological support. MHS team was specifically trained in BPD treatment and had regular supervisions. Results All patients improved on CGI, GAF, and STAXI scores after 6 and 12 months, independently of treatment received. SB-APP group showed better outcome on impulsivity, suicide attempts, chronic feelings of emptiness, and disturbed relationships. We found a good stabilization at the one year follow-up, even after the interruption of brief psychotherapy in the SB-APP group. Conclusions Although STM for BPD applied to heavy MHS users was effective in reducing symptoms and improving their global functioning, adding a time

Supervised team management, with or without structured psychotherapy, in heavy users of a mental health service with borderline personality disorder: a two-year follow-up preliminary randomized study.

Science.gov (United States)

Amianto, Federico; Ferrero, Andrea; Pierò, Andrea; Cairo, Elisabetta; Rocca, Giuseppe; Simonelli, Barbara; Fassina, Simona; Abbate-Daga, Giovanni; Fassino, Secondo

2011-11-21

Individuals affected by severe Borderline Personality Disorder (BPD) are often heavy users of Mental Health Services (MHS). Short-term treatments currently used in BPD therapy are useful to target disruptive behaviors but they are less effective in reducing heavy MHS use. Therefore, alternative short-term treatments, less complex than long-term psychodynamic psychotherapies but specifically oriented to BPD core problems, need to be developed to reduce MHS overuse. This study aimed to evaluate the efficacy of adding Sequential Brief Adlerian Psychodynamic Psychotherapy (SB-APP) to Supervised Team Management (STM) in BPD treatment compared to STM alone in a naturalistic group of heavy MHS users with BPD. Effectiveness was evaluated 6 times along a two-year follow-up. Thirty-five outpatients who met inclusion criteria were randomly assigned to two treatment groups (STM = 17; SB-APP = 18) and then compared. Clinical Global Impression (CGI) and CGI-modified (CGI-M) for BPD, Global Assessment of Functioning (GAF), State-Trait Anger Expression Inventory (STAXI), and Symptom Checklist-90 Revised (SCL-90-R) were administered at T1, T3, T6, T12, T18 and T24. At T12 the Working Alliance Inventory-Short Form (WAI-S) was also completed. At the one-year follow-up, SB-APP group did not receive any additional individual psychological support. MHS team was specifically trained in BPD treatment and had regular supervisions. All patients improved on CGI, GAF, and STAXI scores after 6 and 12 months, independently of treatment received. SB-APP group showed better outcome on impulsivity, suicide attempts, chronic feelings of emptiness, and disturbed relationships. We found a good stabilization at the one year follow-up, even after the interruption of brief psychotherapy in the SB-APP group. Although STM for BPD applied to heavy MHS users was effective in reducing symptoms and improving their global functioning, adding a time-limited and focused psychotherapy was found to achieve a

Appearing smart: the impression management of intelligence, person perception accuracy, and behavior in social interaction.

Science.gov (United States)

Murphy, Nora A

2007-03-01

Intelligence is an important trait that affects everyday social interaction. The present research utilized the ecological perspective of social perception to investigate the impression management of intelligence and strangers' evaluations of targets' intelligence levels. The ability to effectively portray an impression of intelligence to outside judges as well as interaction partners was appraised and the effect of impression management on the accurate judgment of intelligence was assessed. In addition, targets' behavior was studied in relation to impression management, perceived intelligence, and actual measured intelligence. Impression-managing targets appeared more intelligent to video judges but not to their interaction partner as compared to controls. The intelligence quotient (IQ) of impression-managing targets was more accurately judged than controls' IQ. Impression-managing targets displayed distinct nonverbal behavioral patterns that differed from controls. Looking while speaking was a key behavior: It significantly correlated with IQ, was successfully manipulated by impression-managing targets, and contributed to higher perceived intelligence ratings.

Factors influencing optical 3D scanning of vinyl polysiloxane impression materials.

Science.gov (United States)

DeLong, R; Pintado, M R; Ko, C C; Hodges, J S; Douglas, W H

2001-06-01

Future growth in dental practice lies in digital imaging enhancing many chairside procedures and functions. This revolution requires the fast, accurate, and 3D digitizing of clinical records. One such clinical record is the chairside impression. This study investigated how surface angle and surface roughness affect the digitizing of vinyl polysiloxane impression materials. Seventeen vinyl polysiloxane impression materials were digitized with a white light optical digitizing system. Each sample was digitized at 3 different angles: 0 degrees, 22.5 degrees, and 45 degrees, and 2 digitizer camera f-stops. The digitized images were rendered on a computer monitor using custom software developed under NIH/NIDCR grant DE12225. All the 3D images were rotated to the 0 degrees position, cropped using Corel Photo-Paint 8 (Corel Corp, Ottawa, Ontario, Canada), then saved in the TIFF file format. The impression material area that was successfully digitized was calculated as a percentage of the total sample area, using Optimas 5.22 image processing software (Media Cybernetics, LP, Silver Spring, MD). The dependent variable was a Performance Value calculated for each material by averaging the percentage of area that digitized over the 3 angles. New samples with smooth and rough surfaces were made using the 7 impression materials with the largest Performance Values. These samples were tested as before, but with the additional angle of 60 degrees. Silky-Rock die stone (Whip Mix Corp, Louisville, KY) was used as a control. The Performance Values for the 17 impression materials ranged from 0% to 100%. The Performance Values for the 7 best materials were equivalent to the control at f/11 out to a surface angle of 45 degrees; however, only Examix impression material (GC America Inc, Alsip, IL) was equivalent to the control at f/11/\\16. At the 60 degrees surface angle with f/11/\\16, the Performance Values were 0% for all the impression materials, whereas that for the control was 90

Reducing job insecurity and increasing performance ratings: does impression management matter?

Science.gov (United States)

Huang, Guo-hua; Zhao, Helen Hailin; Niu, Xiong-ying; Ashford, Susan J; Lee, Cynthia

2013-09-01

Prior research on job insecurity has demonstrated its detrimental effects on both employees and the organization, yet no research has detailed how people actively deal with it. Drawing from proactivity research, this article argues that job insecurity prompts a proactive use of impression management tactics in the workplace. The effectiveness of these tactics depends on the level of supervisory liking for the employee and the attributions supervisors make regarding the employee's motives for the impression management behaviors (i.e., for the good of the organization or for self-interest). A 3-wave survey study of 271 Chinese employees and their supervisors showed that employees experiencing job insecurity in Time 1 reported using a variety of tactics to impress their supervisors at Time 2 and that these tactics curbed the affect associated with job insecurity and enhanced supervisor rated performance, through supervisor's liking and attributed motives. The relationship between impression management and increased supervisor-rated performance was moderated by supervisor attributions; the relationship between impression management and reduced affective job insecurity depended on supervisor liking. PsycINFO Database Record (c) 2013 APA, all rights reserved

Children's Impressions of Television Families.

Science.gov (United States)

Wartella, Ellen

This research study examines the types of social behaviors portrayed by families in various television series and explores children's impressions of the TV family members. Content analysis of nine family-oriented TV series was employed to describe the ranges of behaviors of fathers, mothers and children on television. Eleven shows from each series…

How do you say ‘hello’? Personality impressions from brief novel voices

OpenAIRE

McAleer, Phil; Todorov, Alexander; Belin, Pascal

2014-01-01

On hearing a novel voice, listeners readily form personality impressions of that speaker. Accurate or not, these impressions are known to affect subsequent interactions; yet the underlying psychological and acoustical bases remain poorly understood. Furthermore, hitherto studies have focussed on extended speech as opposed to analysing the instantaneous impressions we obtain from first experience. In this paper, through a mass online rating experiment, 320 participants rated 64 sub-second voca...

Effectiveness of Disinfectants on Antimicrobial and Physical Properties of Dental Impression Materials.

Science.gov (United States)

Demajo, Jean Karl; Cassar, Valter; Farrugia, Cher; Millan-Sango, David; Sammut, Charles; Valdramidis, Vasilis; Camilleri, Josette

2016-01-01

The aim of this study was to assess the antimicrobial activity of chemical disinfectants on alginate and silicone impression materials. The effect of chemical disinfectants on the dimensional stability of the impression materials was also assessed. For the microbiologic assessment, impressions of the maxillary arch were taken from 14 participants, 7 using alginate and 7 using an addition silicone. The impressions were divided into three sections. Each section was subjected to spraying with MD 520 or Minuten or no disinfection (control), respectively. Antimicrobial action of the chemical disinfectants was assessed by measuring microbial counts in trypticase soy agar (TSA) media and expressing the results in colony-forming units/cm2. The surface area of the dental impressions was calculated by scanning a stone cast using computer-aided design/computer-assisted manufacture and analyzing the data using a custom computer program. The dimensional stability of the impression materials after immersion in disinfectants was assessed by measuring the linear displacement of horizontally restrained materials using a traveling microscope. The percent change in length over 3 hours was thus determined. Alginate exhibited a higher microbial count than silicone. MD 520 eliminated all microbes as opposed to Minuten. The bacterial growth after Minuten disinfection was almost twice as much for alginate than for addition silicone impressions. The chemical disinfectants affected the alginate dimensional stability. Minuten reduced the shrinkage sustained by alginate during the first hour of storage. Alginate harbors three times more microorganisms than silicone impression material. Chemical disinfection by glutaraldehyde-based disinfectant was effective in eliminating all microbial forms for both alginate and silicone without modifying the dimensional stability. Alcohol-based disinfectants, however, reduced the alginate shrinkage during the first 90 minutes of setting. The current studies

Comparison of Accuracy Between a Conventional and Two Digital Intraoral Impression Techniques.

Science.gov (United States)

Malik, Junaid; Rodriguez, Jose; Weisbloom, Michael; Petridis, Haralampos

To compare the accuracy (ie, precision and trueness) of full-arch impressions fabricated using either a conventional polyvinyl siloxane (PVS) material or one of two intraoral optical scanners. Full-arch impressions of a reference model were obtained using addition silicone impression material (Aquasil Ultra; Dentsply Caulk) and two optical scanners (Trios, 3Shape, and CEREC Omnicam, Sirona). Surface matching software (Geomagic Control, 3D Systems) was used to superimpose the scans within groups to determine the mean deviations in precision and trueness (μm) between the scans, which were calculated for each group and compared statistically using one-way analysis of variance with post hoc Bonferroni (trueness) and Games-Howell (precision) tests (IBM SPSS ver 24, IBM UK). Qualitative analysis was also carried out from three-dimensional maps of differences between scans. Means and standard deviations (SD) of deviations in precision for conventional, Trios, and Omnicam groups were 21.7 (± 5.4), 49.9 (± 18.3), and 36.5 (± 11.12) μm, respectively. Means and SDs for deviations in trueness were 24.3 (± 5.7), 87.1 (± 7.9), and 80.3 (± 12.1) μm, respectively. The conventional impression showed statistically significantly improved mean precision (P < .006) and mean trueness (P < .001) compared to both digital impression procedures. There were no statistically significant differences in precision (P = .153) or trueness (P = .757) between the digital impressions. The qualitative analysis revealed local deviations along the palatal surfaces of the molars and incisal edges of the anterior teeth of < 100 μm. Conventional full-arch PVS impressions exhibited improved mean accuracy compared to two direct optical scanners. No significant differences were found between the two digital impression methods.

[Study on the effect of different impression methods on the marginal fit of all-ceramic crowns].

Science.gov (United States)

Zhan, Lilin; Zeng, Liwei; Chen, Ping; Liao, Lan; Li, Shiyue; Liu, Renying

2015-08-01

To investigate the effect of three different impression methods on the marginal fit of all-ceramic crowns. The three methods include scanning silicone rubber impression, cast models, and direct optical impression. The polymethyl methacrylate (PMMA) material of a mandibular first molar in standard model was prepared with 16 models duplicated. The all-ceramic crowns were prepared using three different impression methods. Accurate impressions were made using silicone rubber, and the cast models were obtained. The PMMA models, silicone rubber impressions, and cast models were scanned, and digital models of three groups were obtained to produce 48 zirconia all-ceramic crowns with computer aided design/computer aided manufacture. The marginal fit of these groups was measured by silicone rubber gap impression. Statistical analysis was performed with SPSS 17.0 software. The marginal fit of direct optical impression groups, silicone rubber impression groups, cast model groups was (69.18±9.47), (81.04±10.88), (84.42±9.96) µm. A significant difference was observed in the marginal fit of the direct optical impression groups and the other groups (Pimpression groups and the cast model groups (P>0.05). All marginal measurement sites are clinically acceptable by the three different impression scanning methods. The silicone rubber impression scanning method can be used for all-ceramic restorations.

A new method for assessing the accuracy of full arch impressions in patients.

Science.gov (United States)

Kuhr, F; Schmidt, A; Rehmann, P; Wöstmann, B

2016-12-01

To evaluate a new method of measuring the real deviation (trueness) of full arch impressions intraorally and to investigate the trueness of digital full arch impressions in comparison to a conventional impression procedure in clinical use. Four metal spheres were fixed with composite using a metal application aid to the lower teeth of 50 test subjects as reference structures. One conventional impression (Impregum Penta Soft) with subsequent type-IV gypsum model casting (CI) and three different digital impressions were performed in the lower jaw of each test person with the following intraoral scanners: Sirona CEREC Omnicam (OC), 3M True Definition (TD), Heraeus Cara TRIOS (cT). The digital and conventional (gypsum) models were analyzed relative to the spheres. Linear distance and angle measurements between the spheres, as well as digital superimpositions of the spheres with the reference data set were executed. With regard to the distance measurements, CI showed the smallest deviations followed by intraoral scanners TD, cT and OC. A digital superimposition procedure yielded the same order for the outcomes: CI (15±4μm), TD (23±9μm), cT (37±14μm), OC (214±38μm). Angle measurements revealed the smallest deviation for TD (0.06°±0,07°) followed by CI (0.07°±0.07°), cT (0.13°±0.15°) and OC (0.28°±0.21°). The new measuring method is suitable for measuring the dimensional accuracy of full arch impressions intraorally. CI is still significantly more accurate than full arch scans with intraoral scanners in clinical use. Conventional full arch impressions with polyether impression materials are still more accurate than full arch digital impressions. Digital impression systems using powder application and active wavefront sampling technology achieve the most accurate results in comparison to other intraoral scanning systems (DRKS-ID: DRKS00009360, German Clinical Trials Register). Copyright © 2016 Elsevier Ltd. All rights reserved.

Neurofibromatosis, stroke and basilar impression: case report Neurofibromatose, acidente vascular cerebral e impressão basilar: relato de caso

Directory of Open Access Journals (Sweden)

ELCIO JULIATO PIOVESAN

1999-06-01

Full Text Available Neurofibromatosis type 1 (NF1 can virtually affect any organ, presenting most frequently with "cafe au lait" spots and neurofibromas. Vasculopathy is a known complication of NF1, but cerebrovascular disease is rare. We report the case of a 51-year-old man admitted to the hospital with a history of stroke four months before admission. On physical examination, he presented various "cafe au lait" spots and cutaneous neurofibromas. Neurologic examination demonstrated right-sided facial paralysis, right-sided hemiplegia, and aphasia. Computed tomography scan of head showed hypodense areas in the basal ganglia and centrum semiovale. Radiographs of cranium and cervical spine showed basilar impression. Angiography revealed complete occlusion of both vertebral and left internal carotid arteries, and partial stenosis of the right internal carotid artery. A large network of collateral vessels was present (moyamoya syndrome. It is an uncommon case of occlusive cerebrovascular disease associated with NF1, since most cases described in the literature are in young people, and tend to spare the posterior cerebral circulation. Basilar impression associated with this case may be considered a pure coincidence, but rare cases of basilar impression and NF1 have been described.A neurofibromatose tipo 1 (NF1 pode acometer qualquer órgão mas as apresentações mais frequente são manchas café com leite e neurofibromas. O envolvimento de vasos é complicação conhecida da NF1, mas a doença cerebrovascular é rara. Relatamos o caso de paciente do sexo masculino de 51 anos com história de acidente vascular cerebral há quatro meses da admissão. Ao exame físico apresentava várias manchas café com leite e neurofibromas cutâneos. O exame neurológico demonstrou acometimento facial direito, hemiplegia direita e afasia. Tomografia computadorizada de crânio mostrou áreas hipodensas nos gânglios basais e centros semi-ovais. Radiografias do crânio e coluna cervical

Effect of storage period on the accuracy of elastomeric impressions

Directory of Open Access Journals (Sweden)

Eduardo Batista Franco

2007-06-01

Full Text Available AIMS: To investigate the effect of the storage period on the accuracy of recently developed elastomeric materials. METHODS: Simultaneous impressions of a steel die were taken using a polyether (I: Impregum Soft Heavy and Light body, 3M ESPE and vinyl polysiloxane (P: Perfectim Blue Velvet and Flexi-Velvet, J.Morita. The trays were loaded with the heavy-bodied impression materials while the light-bodied impression materials were simultaneously spread on the steel die. The impressions were poured after 2 hours, 24 hours, and 7 days. Impressions were stored at approximately 55% relative humidity and room temperature. Ten replicas were produced for each experimental condition (n=60. Accuracy of the stone dies was assessed with a depth-measuring microscope. The difference in height between the surface of the stone die and a standard metallic ring was recorded in micrometers at four demarcated points, by two independent examiners. Data were submitted to two-way ANOVA and Tukey test (a = 0.05. RESULTS: Significant differences were found among the groups. Smaller discrepancies were observed when pouring was performed up to 24 hours (I-2h= 65.0 ± 15.68 µm; I-24h= 81.6 ± 11.13 µm for the polyether, and up to 7 days for the vinyl polysiloxane (P-2h= 79.1 ± 13.82 µm; P-24h= 96.8 ± 6.02 µm; P-7d= 81.4 ± 4.3 µm. Significant dimensional discrepancies, however, were observed when polyether was stored for 7 days (I-7d= 295.3 ± 17.4 µm. CONCLUSION: Storage may significantly affect the dimensional accuracy of impressions and, thus, a maximum period and storage condition should be specified for the recently developed materials.

Contact angle of unset elastomeric impression materials.

Science.gov (United States)

Menees, Timothy S; Radhakrishnan, Rashmi; Ramp, Lance C; Burgess, John O; Lawson, Nathaniel C

2015-10-01

Some elastomeric impression materials are hydrophobic, and it is often necessary to take definitive impressions of teeth coated with some saliva. New hydrophilic materials have been developed. The purpose of this in vitro study was to compare contact angles of water and saliva on 7 unset elastomeric impression materials at 5 time points from the start of mixing. Two traditional polyvinyl siloxane (PVS) (Aquasil, Take 1), 2 modified PVS (Imprint 4, Panasil), a polyether (Impregum), and 2 hybrid (Identium, EXA'lence) materials were compared. Each material was flattened to 2 mm and a 5 μL drop of distilled water or saliva was dropped on the surface at 25 seconds (t0) after the start of mix. Contact angle measurements were made with a digital microscope at initial contact (t0), t1=2 seconds, t2=5 seconds, t3=50% working time, and t4=95% working time. Data were analyzed with a generalized linear mixed model analysis, and individual 1-way ANOVA and Tukey HSD post hoc tests (α=.05). For water, materials grouped into 3 categories at all time-points: the modified PVS and one hybrid material (Identium) produced the lowest contact angles, the polyether material was intermediate, and the traditional PVS materials and the other hybrid (EXA'lence) produced the highest contact angles. For saliva, Identium, Impregum, and Imprint 4 were in the group with the lowest contact angle at most time points. Modified PVS materials and one of the hybrid materials are more hydrophilic than traditional PVS materials when measured with water. Saliva behaves differently than water in contact angle measurement on unset impression material and produces a lower contact angle on polyether based materials. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Randomized controlled clinical trial on the three-dimensional accuracy of fast-set impression materials.

Science.gov (United States)

Rudolph, Heike; Quaas, Sebastian; Haim, Manuela; Preißler, Jörg; Walter, Michael H; Koch, Rainer; Luthardt, Ralph G

2013-06-01

The use of fast-setting impression materials with different viscosities for the one-stage impression technique demands precise working times when mixing. We examined the effect of varying working time on impression precision in a randomized clinical trial. Focusing on tooth 46, three impressions were made from each of 96 volunteers, using either a polyether (PE: Impregum Penta H/L DuoSoft Quick, 3 M ESPE) or an addition-curing silicone (AS: Aquasil Ultra LV, Dentsply/DeTrey), one with the manufacturer's recommended working time (used as a reference) and two with altered working times. All stages of the impression-taking were subject to randomization. The three-dimensional precision of the non-standard working time impressions was digitally analyzed compared to the reference impression. Statistical analysis was performed using multivariate models. The mean difference in the position of the lower right first molar (vs. the reference impression) ranged from ±12 μm for PE to +19 and -14 μm for AS. Significantly higher mean values (+62 to -40 μm) were found for AS compared to PE (+21 to -26 μm) in the area of the distal adjacent tooth. Fast-set impression materials offer high precision when used for single tooth restorations as part of a one-stage impression technique, even when the working time (mixing plus application of the light- and heavy-body components) diverges significantly from the manufacturer's recommended protocol. Best accuracy was achieved with machine-mixed heavy-body/light-body polyether. Both materials examined met the clinical requirements regarding precision when the teeth were completely syringed with light material.

Use of digital impression systems with intraoral scanners for fabricating restorations and fixed dental prostheses.

Science.gov (United States)

Takeuchi, Yoshimasa; Koizumi, Hiroyasu; Furuchi, Mika; Sato, Yohei; Ohkubo, Chikahiro; Matsumura, Hideo

2018-01-01

Accurate impressions are essential in fabri-cating dental restorations and fixed dental prostheses. During the last decade, digital impression systems have improved substantially. This review discusses the accuracy of digital impression systems for fabrication of dental restorations and fixed dental prostheses. A literature search in PubMed was performed for the period from July 2010 through June 2017. The search keywords were Cerec, digital impression, direct digitalization, indirect digitalization, and intraoral scanner. Only relevant studies are summarized and discussed in this review. In general, the latest systems have considerably reduced the time required for impression making, and the accuracy and marginal fit of digital impression systems have recently improved. Restorations and fixed dental prostheses fabricated with currently available digital impression systems and intraoral scanners exhibit clinically acceptable ranges of marginal gap in both direct and indirect procedures.

Schizophrenia and work: aspects related to job acquisition in a follow-up study

Directory of Open Access Journals (Sweden)

Larissa C. Martini

2017-08-01

Full Text Available Objective: Work is considered one of the main forms of social organization; however, few individuals with schizophrenia find work opportunities. The purpose of this study was to evaluate the relationship between schizophrenia symptoms and job acquisition. Method: Fifty-three individuals diagnosed with schizophrenia from an outpatient treatment facility were included in an 18-month follow-up study. After enrollment, they participated in a prevocational training group. At the end of training (baseline and 18 months later, sociodemographic, clinical data and occupational history were collected. Positive and negative symptoms (Positive and Negative Syndrome Scale – PANSS, depression (Calgary Depression Scale, disease severity (Clinical Global Impression – CGI, functionality (Global Assessment of Functioning – GAF, personal and social performance (Personal and Social Performance – PSP and cognitive functions (Measurement and Treatment Research to Improve Cognition in Schizophrenia – MATRICS battery were applied at baseline and at the end of the study. Results: Those with some previous work experience (n=19 presented lower scores on the PANSS, Calgary, GAF, CGI and PSP scales (p < 0.05 than those who did not work. Among those who worked, there was a slight worsening in positive symptoms (positive PANSS. Conclusions: Individuals with less severe symptoms were more able to find employment. Positive symptom changes do not seem to affect participation at work; however, this calls for discussion about the importance of employment support.

Oxytocin and first impressions

OpenAIRE

Friberg, Mads

2012-01-01

Subtle facial expressions may cause "core impressions" of other people, i.e. a feeling of like or dislike witch is affected by facial cues that is not explicitly and consciously recognized. In the present investigation, we were interested in how the neuropeptide oxytocin affects recognition of these subtle facial expressions. Participants received oxytocin or placebo, and viewed static and dynamic "hybrid" faces that showed a facial expression (happiness, anger, fear, sadness) only in the lo...

Managing impressions and forests

OpenAIRE

Ångman, Elin; Hallgren, Lars; Nordström, Eva-Maria

2011-01-01

Social interaction is an important—and often forgotten—aspect of conflicts in natural resource management (NRM). Building on the theoretical framework of symbolic interaction, this article explores how the concept of impression management during social interaction can help understand NRM conflicts. A qualitative study was carried out on a Swedish case involving a conflict over clear-cutting of a forest. To explain why the conflict escalated and destructivity increased, we investigated how the...

Development of a digital impression procedure using photogrammetry for complete denture fabrication.

Science.gov (United States)

Matsuda, Takashi; Goto, Takaharu; Kurahashi, Kosuke; Kashiwabara, Toshiya; Ichikawa, Tetsuo

We developed an innovative procedure for digitizing maxillary edentulous residual ridges with a photogrammetric system capable of estimating three-dimensional (3D) digital forms from multiple two-dimensional (2D) digital images. The aim of this study was to validate the effectiveness of the photogrammetric system. Impressions of the maxillary residual ridges of five edentulous patients were taken with four kinds of procedures: three conventional impression procedures and the photogrammetric system. Plaster models were fabricated from conventional impressions and digitized with a 3D scanner. Two 3D forms out of four forms were superimposed with 3D inspection software, and differences were evaluated using a least squares best fit algorithm. The in vitro experiment suggested that better imaging conditions were in the horizontal range of ± 15 degrees and at a vertical angle of 45 degrees. The mean difference between the photogrammetric image (Form A) and the image taken from conventional preliminarily impression (Form C) was 0.52 ± 0.22 mm. The mean difference between the image taken of final impression through a special tray (Form B) and Form C was 0.26 ± 0.06 mm. The mean difference between the image taken from conventional final impression (Form D) and Form C was 0.25 ± 0.07 mm. The difference between Forms A and C was significantly larger than the differences between Forms B and C and between Forms D and C. The results of this study suggest that obtaining digital impressions of edentulous residual ridges using a photogrammetric system is feasible and available for clinical use.

The effect of impression volume and double-arch trays on the registration of maximum intercuspation.

Science.gov (United States)

Hahn, Sara M; Millstein, Philip L; Kinnunen, Taru H; Wright, Robert F

2009-12-01

The type of double-arch trays used may affect occlusion. The purpose of this study was to determine what effect, if any, double-arch tray design and impression material volume had on the registration of maximum intercuspation (MI). Quadrant impressions were made on articulated fracture-resistant dental casts mounted in maximum intercuspation occlusion. Three types of sideless double-arch impression trays were used: First Bite with nylon webbing, Sultan's 3-Way with double crosshatch webbing, and Premium's 3-in-1 Tray with single crosshatch webbing. Vinyl polysiloxane impression material (Aquasil Ultra Rigid Fast Set) was distributed at 2 different volumes (5.4 ml and 8.3 ml), and 60 impressions were made (n=10). A weight of 1.2 kg was placed on the upper arm of an Artex articulator, ensuring complete closure. The impressions were allowed to polymerize for 5 minutes. After polymerization, specimens were placed on a light box, and a camera set at a fixed distance was used to capture the light transmission that was projected through the impression material. The camera transferred the information to an image analysis program (ImageJ). This system allowed the different amounts of light projected through the impression to be translated into a gray scale value (GSV), which was assigned a thickness value, in millimeters, of a specified occlusal contact area. To assess reliability of the experimental design, 10 control impressions were made by directly applying impression material onto the typodont. These were analyzed in the same manner as the impressions made with trays. A 2-way ANOVA comparing volume by tray type was used (alpha=.05). This was followed by a Tukey HSD test. There was no main effect for volume of impression material (P=.71). Tray type was significantly different (Precord making.

Crime scene reconstruction-Sex prediction from blood stained foot sole impressions.

Science.gov (United States)

Basu, Nabanita; Bandyopadhyay, Samir Kumar

2017-09-01

It is often difficult to predict the sex of an individual based on bloody incomplete footprints. However, such prints/impressions are particularly common in a crime scene. Again variability in the texture, color of the target surface has an impact on the bloodstained impression formed. The study of bare foot, footprint, footwear (i.e. shoe, canvas etc.) within the legal context is referred to as forensic podiatry. Based on the fact that it is possible to predict the sex of an individual from footprint impressions, an automated model has been proposed in this paper for analyzing the sex of an individual from his/her broken/incomplete footprint impressions based on morphological features alone. Five male and female volunteers aged between 20 to 65 years participated in dataset development. Keeping the blood volume constant and having stepped on differently shaped porcine blood pools, the individuals were asked to walk on herbarium sheets. The footprints were recorded and documented in accordance with the guidelines in place for physical evidence documentation within the forensic domain. The morphological features that were extracted from each of the footprint impressions are footprint length, footprint breadth, angle of walking, approximated heel radius etc. Using exhaustive cross validation technique, the dataset was divided into training and test set. Non-redundant, relevant features that are particularly effective at sex prediction were marked out using the relief algorithm in coherence with the correlation metric. Supervised learning techniques were used on the dataset to predict the sex of the owner of an unknown footprint. The study concentrates on morphological features in order to deal with bloodstain footprint transfer stains formed on any non-porous/non-absorbent surfaces such as cemented floor, glass, mosaic floor space, colored and designed tiled floor spaces. Features such as the angle of walking and foot breadth were found to be particularly influential

Study of differential gene expression in human hepatocyte exposed to 50 cGy γ ray

International Nuclear Information System (INIS)

Wen Jianhua; Li Jianguo; Tian Huancheng; Li Yanling; Wang Xiaoli; Zuo Yanhui

2008-01-01

The study analyzed the differential transcriptional profile of the normal human hepatic cell and the human hepatic cell radiated with 50 cGy γ ray by gene chip technique. The results showed that there were 614 differentially expressed genes among 14 112 human genes analyzed, in which 521 genes were up-regulated and 93 genes down-regulated. These genes are associated with mitochondrial regulation, homo sapiens hepatitis A virus cellular receptor, tumor necrosis factor, cell cycle regulation, kinase and zinc finger protein etc. RT-PCR results indicated that up-regulated expression of gene HAVcr-1, HAVcr-2, MFTC, MOAP1 and down-regulated expression of gene TRIP12, DCN were consistent with gene chip data. (authors)

Globalization, Credence Goods and International Civil Society

OpenAIRE

Krautheim, Sebastian; Verdier, Thierry

2012-01-01

The process of globalization is characterized by an impressive growth in global value chains, as well as the proliferation of non-governmental organizations (NGOs) interacting with production and sourcing decisions of multinational firms. In this paper, we present a simple North-South model of international trade allowing for the joint emergence of firm offshoring to South and NGO activism financed by donations from the civil society. In our model northern consumers care about unobservable “c...

Dishonest responding or true virtue? A behavioral test of impression management

NARCIS (Netherlands)

Zettler, I.; Hilbig, B.E.; Moshagen, M.; de Vries, R.E.

2015-01-01

Impression management or social desirability scales have been used widely to assess and control for self-favoring biases in self-reports, both in low and high demand situations. Recently, however, substantive interpretations of impression management scores have surfaced, including the simple but

A Retrospective Study of Long Acting Risperidone Use to Support Treatment Adherence in Youth with Conduct Disorder.

Science.gov (United States)

Demirkaya, Sevcan Karakoç; Aksu, Hatice; Özgür, Börte Gürbüz

2017-11-30

Risperidone has been widely used to control aggression and conduct disorder (CD) in youth; however, treatment compliance is a major problem in CD. Our aim is to evaluate the effectiveness and tolerability of long-acting risperidone (LAR) in treating nonadherent cases. The medical records of children and adolescents who had CD and were nonadherent to conventional drugs and psychosocial interventions (and therefore taking LAR) were reviewed. Informed consent on offlabel use of LAR was obtained from the parents. Clinical Global Impression (CGI) Severity (CGI-S) and CGI-Improvement scales were used and baseline and end points were compared. The study comprised 14 children and adolescents (5 girls, 9 boys). All had comorbid disorders: substance use disorder (n=8), attention deficit hyperactivity disorder (n=6), and major depression (n=2). Mean duration of LAR use was 3.1 months (1.5-8 months). We observed significant improvements in the baseline and endpoint CGI-S scores for CD in all but one patient (Z=-3.198; p ＜0.001). Only mild adverse effects were observed: weight gain (n=2), sedation (n=1), leg cramps (n=1), and increased appetite with no weight gain (n=1). LAR is effective and tolerable for patients with CD who can't be medicated with oral preparations due to nonadherence to treatment. Even short-term LAR use is effective to get compliance. As CD predicts numerous problems in adulthood, appropriate treatment is crucial. To our knowledge, this is the first study on LAR use in youth with CD. The use of LAR deserves careful consideration and further controlled studies are needed to confirm our findings.

Passive fit and accuracy of three dental implant impression techniques.

Science.gov (United States)

Al Quran, Firas A; Rashdan, Bashar A; Zomar, AbdelRahman A Abu; Weiner, Saul

2012-02-01

To reassess the accuracy of three impression techniques relative to the passive fit of the prosthesis. An edentulous maxillary cast was fabricated in epoxy resin with four dental implants embedded and secured with heat-cured acrylic resin. Three techniques were tested: closed tray, open tray nonsplinted, and open tray splinted. One light-cured custom acrylic tray was fabricated for each impression technique, and transfer copings were attached to the implants. Fifteen impressions for each technique were prepared with medium-bodied consistency polyether. Subsequently, the impressions were poured in type IV die stone. The distances between the implants were measured using a digital micrometer. The statistical analysis of the data was performed with ANOVA and a one-sample t test at a 95% confidence interval. The lowest mean difference in dimensional accuracy was found within the direct (open tray) splinted technique. Also, the one-sample t test showed that the direct splinted technique has the least statistical significant difference from direct nonsplinted and indirect (closed tray) techniques. All discrepancies were less than 100 Μm. Within the limitations of this study, the best accuracy of the definitive prosthesis was achieved when the impression copings were splinted with autopolymerized acrylic resin, sectioned, and rejoined. However, the errors associated with all of these techniques were less than 100 Μm, and based on the current definitions of passive fit, they all would be clinically acceptable.

Impression Procedures for Metal Frame Removable Partial Dentures as Applied by General Dental Practitioners.

NARCIS (Netherlands)

Fokkinga, W.A.; Uchelen, J. van; Witter, D.J.; Mulder, J.; Creugers, N.H.J.

2016-01-01

This pilot study analyzed impression procedures for conventional metal frame removable partial dentures (RPDs). Heads of RPD departments of three dental laboratories were asked to record features of all incoming impressions for RPDs during a 2-month period. Records included: (1) impression

Evaluation of properties of irreversible hydrocolloid impression materials mixed with disinfectant liquids

Directory of Open Access Journals (Sweden)

Arul Amalan

2013-01-01

Conclusion: Chlorhexidine solution can be used to mix irreversible hydrocolloid impression materials in regular dental practice as it did not significantly alter the properties. This may ensure effective disinfection of impressions.

How do you say 'hello'? Personality impressions from brief novel voices.

Science.gov (United States)

McAleer, Phil; Todorov, Alexander; Belin, Pascal

2014-01-01

On hearing a novel voice, listeners readily form personality impressions of that speaker. Accurate or not, these impressions are known to affect subsequent interactions; yet the underlying psychological and acoustical bases remain poorly understood. Furthermore, hitherto studies have focussed on extended speech as opposed to analysing the instantaneous impressions we obtain from first experience. In this paper, through a mass online rating experiment, 320 participants rated 64 sub-second vocal utterances of the word 'hello' on one of 10 personality traits. We show that: (1) personality judgements of brief utterances from unfamiliar speakers are consistent across listeners; (2) a two-dimensional 'social voice space' with axes mapping Valence (Trust, Likeability) and Dominance, each driven by differing combinations of vocal acoustics, adequately summarises ratings in both male and female voices; and (3) a positive combination of Valence and Dominance results in increased perceived male vocal Attractiveness, whereas perceived female vocal Attractiveness is largely controlled by increasing Valence. Results are discussed in relation to the rapid evaluation of personality and, in turn, the intent of others, as being driven by survival mechanisms via approach or avoidance behaviours. These findings provide empirical bases for predicting personality impressions from acoustical analyses of short utterances and for generating desired personality impressions in artificial voices.

How do you say 'hello'? Personality impressions from brief novel voices.

Directory of Open Access Journals (Sweden)

Phil McAleer

Full Text Available On hearing a novel voice, listeners readily form personality impressions of that speaker. Accurate or not, these impressions are known to affect subsequent interactions; yet the underlying psychological and acoustical bases remain poorly understood. Furthermore, hitherto studies have focussed on extended speech as opposed to analysing the instantaneous impressions we obtain from first experience. In this paper, through a mass online rating experiment, 320 participants rated 64 sub-second vocal utterances of the word 'hello' on one of 10 personality traits. We show that: (1 personality judgements of brief utterances from unfamiliar speakers are consistent across listeners; (2 a two-dimensional 'social voice space' with axes mapping Valence (Trust, Likeability and Dominance, each driven by differing combinations of vocal acoustics, adequately summarises ratings in both male and female voices; and (3 a positive combination of Valence and Dominance results in increased perceived male vocal Attractiveness, whereas perceived female vocal Attractiveness is largely controlled by increasing Valence. Results are discussed in relation to the rapid evaluation of personality and, in turn, the intent of others, as being driven by survival mechanisms via approach or avoidance behaviours. These findings provide empirical bases for predicting personality impressions from acoustical analyses of short utterances and for generating desired personality impressions in artificial voices.

Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes.

Science.gov (United States)

Yuzbasioglu, Emir; Kurt, Hanefi; Turunc, Rana; Bilir, Halenur

2014-01-30

The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects' attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant. There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques. Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques.

Plutonium Finishing Plant (PFP) Criticality Alarm System Commercial Grade Item (CGI) Critical Characteristics

International Nuclear Information System (INIS)

WHITE, W.F.

1999-01-01

This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for PFP's criticality alarm system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics for any one item. PFP's Criticality Alarm System includes the nine criticality alarm system panels and their associated hardware. This includes all parts up to the first breaker in the electrical distribution system. Specific system boundaries and justifications are contained in HNF-SD-CP-SDD-003, ''Definition and Means of Maintaining the Criticality Detectors and Alarms Portion of the PFP Safety Envelope.'' The procurement requirements associated with the system necessitates procurement of some system equipment as Commercial Grade Items in accordance with HNF-PRO-268, ''Control of Purchased Items and Services.''

[Impression management and self-presentation in occupational life].

Science.gov (United States)

Stresemann, E

2013-06-01

Impression management serves self-preservation as part of self-experience. It is adapted to a given situation as an expression of understanding of the role it plays in striving for success. Impression management and self-presentation mutually influence each other throughout life. Clichés in the traditional self-presentation of men and woman in their gender-specific domain in occupation belong to the past. In employment, contentment as much as discontent are of prime importance for success or failure in the workplace. As role models attract mainly juveniles, they should be held up to critical scrutiny.

A clinical report on the use of closed-tray, hex-lock-friction-fit implant impression copings.

Science.gov (United States)

Raviv, Eli; Hanna, Jan; Raviv, Roy; Harel-Raviv, Mili

2014-08-01

The precision of an impression determines the subsequent accuracy and fit of the final restoration. Therefore, the ultimate search is for the most accurate impression material and the most efficient and least time consuming technique. One of the major debates in implant dentistry has focused on the advantages of the pick-up versus the transfer impression technique. The pick-up technique is widely accepted as the more accurate. However, the conventional transfer technique is simpler and less time consuming. The Hex-Lock-Friction-Fit impression coping (AB Dental Devices) combines the advantages of the transfer impression technique and the pick-up impression technique. In this article we will review the relevant literature, discuss the advantages of this unique implant impression technique, and present some related clinical cases.

Coping with stereotype threat: denial as an impression management strategy.

Science.gov (United States)

von Hippel, William; von Hippel, Courtney; Conway, Leanne; Preacher, Kristopher J; Schooler, Jonathan W; Radvansky, Gabriel A

2005-07-01

Four experiments tested the hypothesis that people who are concerned with impression management cope with stereotype threat through denial. Consistent with this hypothesis, temporary employees threatened by a stereotype of incompetence (Study 1) and hostel-dwelling older adults (Study 2) were more likely to deny incompetence if they were high in impression management. African Americans (Study 3) showed a similar pattern of denying cognitive incompetence, which emerged primarily when they were interviewed by a White experimenter and had attended a predominantly Black high school. In Study 4, White students who expected to take an IQ test and were threatened by a stereotype of being less intelligent than Asians were more likely to deny that intelligence is important if they were high in impression management.

Bragging on Facebook: The Interaction of Content Source and Focus in Online Impression Formation.

Science.gov (United States)

Scott, Graham G; Ravenscroft, Kirsty

2017-01-01

Warranting Theory proposes that third-party testimonials are more influential in online impression formation than target-authored statements. Individuals posting content on social media accurately convey their offline personality while endeavoring to present themselves in a positive light. In doing so, they may misjudge the psychological distance of the majority of viewers, who could view this positive self-presentation as bragging and form resultant negative impressions. In this study, we asked 136 participants to view the Facebook timelines of four female targets. Timeline content varied by source (owner- vs. friend-authored) and focus (generally positive vs. personally positive). Participants were tasked with forming impressions of targets and rating them based on attractiveness, confidence, modesty, and popularity. We found that source and focus played distinct roles in impression formation. More positive impressions were formed when owner-authored content was general, and when friend-authored content was personal. This highlights the role played by content focus in impression formation, and the potentially damaging effect of perceived bragging. These results are discussed in relation to the application of the Warranting Theory of impression formation online, and discrepancies between these results and those from related articles are examined.

Accuracy and dimensional stability of extended-pour and conventional alginate impression materials.

Science.gov (United States)

Imbery, Terence A; Nehring, Joshua; Janus, Charles; Moon, Peter C

2010-01-01

The authors conducted a study to determine if two irreversible hydrocolloid impression materials (Cavex ColorChange, Cavex Holland BV, Haarlem, Netherlands; Jeltrate Plus Antimicrobial Dustless Alginate Impression Material, Dentsply Caulk, Milford, Del.) stored for five days were dimensionally accurate. The authors modified Ivorine teeth (Columbia Dentoform, Long Island City, N.Y.) on a Dentoform model (1560 series model, Columbia Dentoform) to allow measurements of tooth and arch width. They made impressions and generated casts immediately and at five additional times. They recorded tooth and arch widths on the casts and compared the measurements with those for the standard model. Compared with measurements for the model, the greatest measured difference in casts was 0.003 inches for Cavex ColorChange (extended-pour alginate) and 0.005 inches for Jeltrate Plus Antimicrobial Dustless Alginate Impression Material (conventional alginate). The percentage of dimensional change ranged from -0.496 to 0.161 percent for the extended-pour alginate and from -0.174 to 0.912 percent for the conventional alginate. Results of analysis of variance and paired t tests indicated that when generated immediately and at day 5, casts produced from both impression materials were not statistically different from the standard model (P alginate materials can produce accurate impressions at day 5 for diagnostic casts and for fabrication of acrylic appliances.

Accuracy of Single-Step versus 2-Step Double-Mix Impression Technique

DEFF Research Database (Denmark)

Franco, Eduardo Batista; da Cunha, Leonardo Fernandes; Herrera, Francyle Simões

2011-01-01

Objective. To investigate the accuracy of dies obtained from single-step and 2-step double-mix impressions. Material and Methods. Impressions (n = 10) of a stainless steel die simulating a complete crown preparation were performed using a polyether (Impregum Soft Heavy and Light body) and a vinyl...

Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

Science.gov (United States)

Kim, Tae-Gyung; Kim, Sungtae; Lee, Jae-Hoon

2016-01-01

The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n = 40). For ICC (Intraoral, CAD/CAM) group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver) machinable alloy were generated. For IC (Intraoral, Cast) group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM) group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast) group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α = 0.05). The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P 0.05). Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions. PMID:28018914

Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

Directory of Open Access Journals (Sweden)

Tae-Gyung Kim

2016-01-01

Full Text Available The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n=40. For ICC (Intraoral, CAD/CAM group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver machinable alloy were generated. For IC (Intraoral, Cast group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α=0.05. The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P0.05. Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions.

Marginal adaptation of CAD-CAM onlays: Influence of preparation design and impression technique.

Science.gov (United States)

Lima, Fernanda Ferruzzi; Neto, Constantino Fernandes; Rubo, José H; Santos, Gildo Coelho; Moraes Coelho Santos, Maria Jacinta

2018-03-15

Factors that may affect the marginal adaptation of computer-aided design and computer-aided manufacturing (CAD-CAM) restorations include preparation design, impression technique, and CAD-CAM system. The influence of impression technique and preparation design on CAD-CAM partial coverage restorations has not been fully addressed. The purpose of this in vitro study was to investigate the influence of direct and indirect digital impression techniques and 2 preparation designs on the marginal adaptation of CAD-CAM onlays. Two mesio-occlusal buccal onlay preparations with reduction of the mesiobuccal cusp were made: conventional preparation (CP) with a 1.2-mm modified shoulder margin and modified preparation (MP) flat cuspal reduction without shoulder. Virtual models were generated from each preparation by using a digital scanner (BlueCam; Dentsply Sirona) from the plastic teeth (direct digital impression) or from the stone dies (indirect digital impression). Onlays were designed using a CAD-CAM system (CEREC 4.0; Dentsply Sirona), and nanoceramic resin blocks (Lava Ultimate Restorative; 3M ESPE) were milled using the CEREC MCX milling machine. Marginal discrepancy was evaluated using an optical stereomicroscope at ×25 magnification in 18 locations distributed along the margins of the preparation. The data were analyzed by using 3-way ANOVA followed by the Tukey HSD test (α=.05). CP presented a statistically significant reduced average marginal adaptation (59 ±50 μm) than did MP (69 ±58 μm) (Pmarginal discrepancy in the mesial and buccal locations of MP when compared with CP. Regarding impression techniques, the buccal location presented the smallest average marginal discrepancy in restorations fabricated with indirect impression when compared with direct impression (42 ±33 μm and 60 ±39 μm) (Pmargin presented improved marginal adaptation compared with modified preparation with flat cuspal reduction. Direct and indirect digital impression techniques produced

Students’ Impression towards Science Virtual Test (SVT) on Digestive System Topic

Science.gov (United States)

Mahfira, C.; Sanjaya, Y.; Rusyati, L.

2018-05-01

During the past few years, technology has significantly support the improvements in assessment.Computer-based test (CBT) comes up as a new type of assessment which offers many benefits. The implementation of computer-based test in term of students’ perspective gives rise to numbers of mixed reactions. Students’ impression is one of the essential things for the implementation of SVT. The purpose of this study was to investigate the impression of students toward SVT. The method used in this research was descriptive method. The participant was 98 students from Junior High School “X” in East Bandung. Students’ impression questionnaire was used as the instrument. There are four aspects tested in this instrument which are students’ experience, technical activity, preference and media of SVT. The result shows that SVT generally gives positive impression to students. Students have a positive experience and did not encounter significant problem when implementing SVT. Students prefer to use SVT and students think the media of SVT is already good.

Citologia de impressão no diagnóstico de infecção corneana por Acanthamoeba: relato de caso Diagnosis of Acanthamoeba corneal infection by impression cytology: case report

Directory of Open Access Journals (Sweden)

Jeison de Nadai Barros

2007-03-01

Full Text Available Relatamos três casos de infecção corneana por Acanthamoeba sp em que foi possível detectar cistos do microorganismo com a técnica de citologia de impressão. Três pacientes encaminhados ao Laboratório de Doenças Externas Oculares em 2004 com alterações superficiais da córnea foram submetidos ao exame de citologia de impressão para investigação da presença de cistos de Acanthamoeba sp. Duas amostras foram obtidas da córnea de cada paciente e coradas com PAS, hematoxilina e Papanicolaou. Investigação microbiológica de rotina e cultura também foram realizadas após raspado da córnea. O cultivo das amostras e a citologia de impressão foram positivas para Acanthamoeba sp em todos os pacientes, ao passo que os raspados corados com Giemsa foram positivos em dois casos. A citologia de impressão revelou cistos de Acanthamoeba sp entre feixe de células epiteliais corneanas e como células isoladas. Foram observados cistos no epitélio de um dos pacientes com a citologia de impressão após três meses de tratamento, enquanto o raspado foi negativo. No exame anatomopatológico observaram-se cistos no epitélio e estroma de uma córnea receptora de um dos pacientes após transplante. Neste estudo, a citologia de impressão detectou com sucesso cistos de Acanthamoeba sp em pacientes com acometimento epitelial. Por tratar-se de método não invasivo, a técnica pode ser usada para facilitar o diagnóstico mais precoce da infecção por Acanthamoeba, sendo útil também no acompanhamento do tratamento da doença.To describe three cases of corneal infection due to Acanthamoeba sp in which was possible to detect Acanthamoeba sp cysts by the corneal impression cytology technique. Three patients referred to the External Eye Disease Laboratory in 2004 with superficial corneal alterations were submitted to corneal specimen collection by impression cytology filter paper to investigate the presence of Acanthamoeba sp cysts. Two impression

Application of the Commercial Grade Item (CGI) Dedication Process for Procurement of Nuclear Safety Related Items at Nuclear Power Plant Krsko (NEK)

International Nuclear Information System (INIS)

Heruc, Z.; Pozar, J.

1998-01-01

CGI procurement is a process whereby parts are brought without imposing Appendix B Quality Assurance requirements on the supplier, and than dedicated for use in safety-related applications. The dedication process involves 1) based upon required safety function, an engineering evaluation to identify critical characteristic of the item and specification of acceptance criteria; and 2) quality control activities to ensure the item(s) supplied meets the acceptance criteria specified. CGI Dedication supports the supply of certified components/parts for the plant operation in an environment where the number of nuclear qualified suppliers diminishes. It requires a more active role of the plant personnel, therefore presenting an additional burden on human resources, but at the same time increases the technical KNOW-HOW and improves the confidence of test and inspection data presented in the certificates. Very often it is also cost beneficial. This paper is a continuation to last year presentation of the introduction of this method into NEK's procurement process and presents the current approach and some practical examples. (author)

Measuring sodium alginate content of brown algae species Padina sp. as the basic matter for making dental impression material (Irreversible hydrocolloid impression material)

OpenAIRE

Nurlindah Hamrun; Suci Amalia Rachman

2016-01-01

One of the most important procedures in denture fabrication and orthodontic treatment is molding the patient’s detail oral cavity to determine the treatment planning. This procedure was done by using alginate impression material or irreversible hydrocolloid in which the basic material is sodium alginate imported from abroad because it is extracted from brown algae which its habitat is not in Indonesia so that it is causes the impression material is relatively expensive roomates is impact to h...

Measuring natrium alginate content of brown algae spesies Padina sp. as the basic matter for making dental impression material (Irreversible hydrocolloid impression material)

OpenAIRE

Nurlindah Hamrun; Suci Amalia Rachman

2016-01-01

One of the most important procedure in denture fabrication and orthodontic treatment is molding the patient’s detail oral cavity to determine the treatment planning. This procedure does by using alginate impression material or irreversible hydrocolloid which is the basic material is natrium alginate which is imported from abroad because it is extracted from brown algae which habitat is not in Indonesia so it is causes the impression material is relative expensive which is impact to high cost ...

In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions

OpenAIRE

Ender, Andreas; Attin, Thomas; Mehl, Albert

2016-01-01

STATEMENT OF PROBLEM: Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. PURPOSE: The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. MATERIAL AND METHODS: Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsilox...

基于CGI技术的嵌入式动态Web的研究与实现%Study and implementation of the embedded dynamic Web based on CGI technology

Institute of Scientific and Technical Information of China (English)

王宝忠; 马成

2012-01-01

In order to realize the dynamic Web effectively in embedded platforms of limited resources, takes embedded Linux operating system as software platform, and takes mini2440 development board as the hardware platform, and uses CGI technology to realize the dynamic Web. By comparing the advantages and disadvantages of several Web server, this paper selects the excellent Boa as embedded Web server, and briefly analyzes the working principle of the Boa server. This article studies the principle and method of CGI technology deeply, and puts forward the developmental method of CGI application program based on the CGIC library, and completes the CGI program of the password authentication system, and realizes the dynamic interaction between the Boa server and the Web page.%为了在资源有限的嵌入式平台上有效地实现动态Web,以嵌入式Linux操作系统为软件平台,以mini2440开发板为硬件平台,利用CGI技术实现了动态Web。本文通过比较几种Web服务器的优缺点,选定了性能优异的Boa作为嵌入式Web服务器,并简要分析了Boa服务器的工作原理。文中深入研究了CGI技术原理及实现方法,提出了基于CGIC函数库的CGI应用程序的开发方式,完成了密码验证系统的CGI程序的编写,并实现了Boa服务器与Web页面的动态交互。

The use of impression management tactics in structured interviews: a function of question type?

Science.gov (United States)

Ellis, Aleksander P J; West, Bradley J; Ryan, Ann Marie; DeShon, Richard P

2002-12-01

This study investigated impression management tactic use during structured interviews containing both experience-based and situational questions. Specifically, the authors examined whether applicants' use of impression management tactics depended on question type. Results from 119 structured interviews indicated that almost all of the applicants used some form of impression management. Significantly more assertive than defensive impression management tactics were used, and among assertive tactics, applicants tended to use self-promotion rather than ingratiation. However, different question types prompted the use of different impression management tactics. Ingratiation tactics were used significantly more when applicants answered situational questions, whereas self-promotion tactics were used significantly more when applicants answered experience-based questions. Furthermore, the use of self-promotion and ingratiation tactics was positively related to interviewer evaluations.

Management of the flabby ridge using a modified window technique and polyvinylsiloxane impression material

Directory of Open Access Journals (Sweden)

Nawaf Labban

2018-01-01

Full Text Available Flabby ridge is a common clinical finding affecting the alveolar ridges of the mandibular or maxillary arches. The anterior region of maxilla is the most affected area in edentulous patients. Dentures on flabby ridges have compromised stability, support, and retention unless adequate measures for its management are employed. Methods applied for flabby ridge management, include surgical removal and augmentation, special impression techniques, balanced distribution of occlusal loads and implant therapy. Special impressions often involve window technique for static impression of flabby area, which present multiple challenges. The purpose of this technique report is to present a modified window technique for the impression of anterior maxillary flabby tissues for improved and controlled application of polyvinylsiloxane impression material that are routinely available in dental practice.

Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes

Science.gov (United States)

2014-01-01

Background The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Methods Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects’ attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant. Results There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques. Conclusions Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques. PMID:24479892

Marginal and Internal Fit of Cobalt-Chromium Fixed Dental Prostheses Generated from Digital and Conventional Impressions

OpenAIRE

Svanborg, Per; Skjerven, Henrik; Carlsson, Pablo; Eliasson, Alf; Karlsson, Stig; Örtorp, Anders

2014-01-01

Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs) fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produce...

[Psychiatric disorders in patients with Cushing's disease before and after neurosurgery].

Science.gov (United States)

Gnjidiae, Zivko; Karloviae, Dalibor; Buljan, Danijel; Malencia, Masa; Kovak-Mufiae, Ana; Kostanjsak, Lidija

2011-01-01

Cushing's disease which is a consequence of ACTH-secreting pituitary adenoma leads to hypercortisolism. Cushing's disease is associated with several psychiatric disturbances. The aim of the present study was to identify which psychiatric disorders were present in patients with Cushing's disease over a 2-year period and to monitor their general psychiatric condition. Additionally, the study aimed to examine the relationship between the duration of Cushing's disease, and the severity of psychiatric conditions based on psychiatric rating scales. The study included 39 patients with Cushing's disease that underwent neurosurgery for ACTH-secreting pituitary adenomas. The transsphenoidal approach (the standard microsurgery technique) was performed in all patients. ACTH-secreting pituitary adenomas were confirmed based on immunohistochemistry in all patients. Psychiatric conditions in the patients were identified using the Clinical Global Impression Scale (CGI) and ICD 10 diagnostic criteria at 3 time points: prior to surgery, and 6 and 48 months post surgery. The Cushing's disease patients exhibited statistically significant improvement in their psychiatric condition, according to the CGI, 6 and 48 months post surgery. There wasn't any significant correlation between the duration of Cushing's disease and psychiatric status, as measured by the CGI prior to surgery, 6 months post surgery, or 48 months post surgery. Patients with Cushing's disease had a significant level psychiatric disturbance that remitted after surgery. There wasn't a significant correlation between the duration of Cushing's disease and psychiatric status.

A Sensitive Measurement for Estimating Impressions of Image-Contents

Science.gov (United States)

Sato, Mie; Matouge, Shingo; Mori, Toshifumi; Suzuki, Noboru; Kasuga, Masao

We have investigated Kansei Content that appeals maker's intention to viewer's kansei. An SD method is a very good way to evaluate subjective impression of image-contents. However, because the SD method is performed after subjects view the image-contents, it is difficult to examine impression of detailed scenes of the image-contents in real time. To measure viewer's impression of the image-contents in real time, we have developed a Taikan sensor. With the Taikan sensor, we investigate relations among the image-contents, the grip strength and the body temperature. We also explore the interface of the Taikan sensor to use it easily. In our experiment, a horror movie is used that largely affects emotion of the subjects. Our results show that there is a possibility that the grip strength increases when the subjects view a strained scene and that it is easy to use the Taikan sensor without its circle base that is originally installed.

Accuracy of a reformulated fast-set vinyl polysiloxane impression material using dual-arch trays.

Science.gov (United States)

Kang, Alex H; Johnson, Glen H; Lepe, Xavier; Wataha, John C

2009-05-01

A common technique used for making crown impressions involves use of a vinyl polysiloxane impression material in combination with a dual-arch tray. A leading dental manufacturer has reformulated its vinyl polysiloxane (VPS) impression line, but the accuracy of the new material has not been verified. The purpose of this study was to assess the accuracy of reformulated VPS impression materials using the single-step dual-arch impression technique. Dual-arch impressions were made on a typodont containing a master stainless steel standard crown preparation die, from which gypsum working dies were formed, recovered, and measured. The impression materials evaluated were Imprint 3 Penta Putty with Quick Step Regular Body (IP-0); Imprint 3 Penta Quick Step Heavy Body with Quick Step Light Body (IP-1); Aquasil Ultra Rigid Fast Set with LV Fast Set (AQ-1); and Aquasil Ultra Heavy Fast Set with XLV Fast Set (AQ-2) (n=10). All impressions were disinfected with CaviCide spray for 10 minutes prior to pouring with type IV gypsum. Buccolingual (BL), mesiodistal (MD), and occlusogingival (OG) dimensions were measured and compared to the master die using an optical measuring microscope. Linear dimensional change was also assessed for IP-0 and AQ-1 at 1 and 24 hours based on ANSI/ADA Specification No. 19. Single-factor ANOVA with Dunnett's T3 multiple comparisons was used to compare BL, MD, and OG changes, with hypothesis testing at alpha=.05. A repeated-measures ANOVA was used to compare linear dimensional changes. There were statistical differences among the 4 impression systems for 3 of 4 dimensions of the master die. IP-0 working dies were significantly larger in MD and OG-L dimensions but significantly smaller in the BL dimension. IP-1 working dies were significantly smaller in the BL dimension compared to the master die. With the exception of IP-0, differences detected were small and clinically insignificant. No significant differences were observed for linear dimensional change

Application of neutral electrolyzed water to disinfection of alginate impression.

Science.gov (United States)

Nagamatsu, Yuki; Chen, Ker-Kong; Nagamatsu, Hiroshi; Kozono, Yoshio; Shimizu, Hiroshi

2016-01-01

Neutral electrolyzed water was developed with new concepts of long-term good durability and minimum corrosiveness to metal in addition to its excellent bactericidal activities similar to acid type of electrolyzed waters. The present study examined the bactericidal effects of the neutral electrolyzed water on disinfection of the alginate impression of a dental arch model contaminated by bacteria. Only 1-min immersion in neutral electrolyzed water could sufficiently disinfect the alginate impression including the metallic tray under ultrasonic with no significant differences from acid electrolyzed waters. No bactericidal effects were found in any electrolyzed water when used as mixing water. Considering the advantages and disadvantages of each electrolyzed water in a comprehensive way, it was suggested that neutral electrolyzed water may be the most appropriate for the disinfection of alginate impression.

Cancer patients and positive sensory impressions in the hospital environment

DEFF Research Database (Denmark)

Timmermann, Connie; Uhrenfeldt, Lisbeth; Birkelund, Regner

2013-01-01

This study explores how cancer patients experience the meaning of positive sensory impressions in the hospital environment such as architecture, decoration and the interior. Data were obtained at a general hospital in Denmark by interviewing six cancer patients at two different wards. The analysis...... process was guided by the hermeneutical–phenomenological theory of interpretation as presented by the French philosopher Paul Ricoeur. Two main themes were identified: to preserve identity and positive thoughts and feelings. The participants experienced that positive sensory impressions in the hospital...... to recall some of their feelings of identity. This paper adds knowledge about how cancer patients experience sensory impressions in the hospital environment. An environment that provides homeliness and offers a view to nature seems to help some patients to preserve their identity. Furthermore, positive...

Dimensional changes of alginate impression by using perforated and non-perforated ring trays

Directory of Open Access Journals (Sweden)

Sumadhi Sastrodihardjo

2010-03-01

Full Text Available Dimensional changes are a common occurrence in impressions, either during or after impression taking. It produces a difference in the dimensions of the object and the model, which leads to the restoration being ill-fitted. Several causal factors have been proposed such as friction between the impression material and the teeth, the bulk of the impression material, the type of impression materials used, the impression technique, the pouring time and many others. The exact causal factor is still unknown and the dimensional change mechanism is still poorly understood. The objective of this research was to investigate the role of the perforation on the ring trays in producing dimensional changes in the impression by using perforated and non-perforated ring trays. Alginate impressions were made on the frustum of cone metal master die with a 7.08 mm base diameter, 7.03 mm top diameter and 9.23 mm height using perforated and non-perforated ring trays with 9.40 mm in diameter and 14.17 mm in height. The dimensional change was determined by comparing the dimension of the dental stone die and its metal master die. The results showed that the percentage of dimensional changes that occurred by using perforated ring tray were (+ 0.56±0.40 on the top area, (- 3.54±2.92 on base area and (+ 1.54±0.83 in height, respectively. As compared to using non-perforated ring trays, the percentage of dimensional changes that occurred were (- 0.49±0.49 on top area, (- 8.76±3.95 on base area and (+ 1.19±0.71 in height, respectively. There was a significant difference in the direction of the dimensional changes on both the top areas, but not in the base areas and height.

Does 6 Hours of Contact With Alginate Impression Material Affect Dental Cast Properties?

Science.gov (United States)

Ibrahim, Amna Adam; Alhajj, Mohammed Nasser; Khalifa, Nadia; Gilada, Magdi Wadie

2017-06-01

Alginate impression (irreversible hydrocolloid) material is commonly used in dental practice because it is easy to mix, low in cost, and well tolerated by patients. The material is not dimensionally stable, however; thus, it is necessary to pour the impression immediately after the molding is accomplished, or within 60 minutes if the impression is kept in 100% humidity. Excessive contact of the alginate impression with the cast model over time may affect the model's properties. In this study, the authors tested the effect of contact time between an alginate impression and type III dental stone on cast model properties. Sixty-seven cast models were obtained from a stainless steel cylinder by using irreversible hydrocolloid impression material and type III dental stone. Thirty-seven cast models were separated from the impression after 1 hour (control group) and 30 cast models were separated after 6 hours (study group). The samples were evaluated under light microscope for surface details and measured by digital caliper for dimensional stability. An indentation on the cast was made and the depth of the indentation was then measured with a digital caliper to measure hardness. The dimensional stability of the cast models was not affected when contact time was increased from 1 hour to 6 hours (P = .507). Surface details did not deteriorate when contact time was increased, as all of the samples could reproduce all details after the 1-hour and 6-hour interval periods. However, hardness was greater after 1 hour of contact time (P = .001) than after 6 hours of contact time. In conclusion, contact between alginate impression material and type III dental stone up to 6 hours did not affect the dimensional stability and richness of the surface; hardness, though, was significantly affected.

Self-presentational persona: simultaneous management of multiple impressions.

Science.gov (United States)

Leary, Mark R; Allen, Ashley Batts

2011-11-01

Most research on self-presentation has examined how people convey images of themselves on only 1 or 2 dimensions at a time. In everyday interactions, however, people often manage their impressions on several image-relevant dimensions simultaneously. By examining people's self-presentations to several targets across multiple dimensions, these 2 studies offer new insights into the nature of self-presentation and provide a novel paradigm for studying impression management. Results showed that most people rely on a relatively small number of basic self-presentational personas in which they convey particular profiles of impressions as a set and that these personas reflect both normative influences to project images that are appropriate to a particular target and distinctive influences by which people put an idiosyncratic spin on these normative images. Furthermore, although people's self-presentational profiles correlate moderately with their self-views, they tailor their public images to specific targets. The degree to which participants' self-presentations were normative and distinctive, as well as the extent to which they reflected their own self-views, were moderated by individual differences in agreeableness, self-esteem, authenticity, and Machiavellianism.

Rethinking Social Desirability Scales: From Impression Management to Interpersonally Oriented Self-Control.

Science.gov (United States)

Uziel, Liad

2010-05-01

Social desirability (specifically, impression management) scales are widely used by researchers and practitioners to screen individuals who bias self-reports in a self-favoring manner. These scales also serve to identify individuals at risk for psychological and health problems. The present review explores the evidence with regard to the ability of these scales to achieve these objectives. In the first part of the review, I present six criteria to evaluate impression management scales and conclude that they are unsatisfactory as measures of response style. Next, I explore what individual differences in impression management scores actually do measure. I compare two approaches: a defensiveness approach, which argues that these scales measure defensiveness that stems from vulnerable self-esteem, and an adjustment approach, which suggests that impression management is associated with personal well-being and interpersonal adjustment. Data from a wide variety of fields including social behavior, affect and well-being, health, and job performance tend to favor the adjustment approach. Finally, I argue that scales measuring impression management should be redefined as measures of interpersonally oriented self-control that identify individuals who demonstrate high levels of self-control, especially in social contexts. © The Author(s) 2010.

Managing Impression Formation in Computer-Mediated Communication.

Science.gov (United States)

Liu, Yuliang; Ginther, Dean

2001-01-01

Offers suggestions for online instructors regarding verbal and nonverbal impression management. The recommendations should facilitate computer mediated teacher-student or manager-client interactions and help develop constructive relationships that promote learning and productivity. (EV)

A Paradigm shift in the concept for making dental impressions

OpenAIRE

Nayar, Sanjna; Mahadevan, R.

2015-01-01

Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By eliminati...

Performance of dental impression materials: Benchmarking of materials and techniques by three-dimensional analysis.

Science.gov (United States)

Rudolph, Heike; Graf, Michael R S; Kuhn, Katharina; Rupf-Köhler, Stephanie; Eirich, Alfred; Edelmann, Cornelia; Quaas, Sebastian; Luthardt, Ralph G

2015-01-01

Among other factors, the precision of dental impressions is an important and determining factor for the fit of dental restorations. The aim of this study was to examine the three-dimensional (3D) precision of gypsum dies made using a range of impression techniques and materials. Ten impressions of a steel canine were fabricated for each of the 24 material-method-combinations and poured with type 4 die stone. The dies were optically digitized, aligned to the CAD model of the steel canine, and 3D differences were calculated. The results were statistically analyzed using one-way analysis of variance. Depending on material and impression technique, the mean values had a range between +10.9/-10.0 µm (SD 2.8/2.3) and +16.5/-23.5 µm (SD 11.8/18.8). Qualitative analysis using colorcoded graphs showed a characteristic location of deviations for different impression techniques. Three-dimensional analysis provided a comprehensive picture of the achievable precision. Processing aspects and impression technique were of significant influence.

The Trouble with Applicant Impression Management.

Science.gov (United States)

Ralston, Steven M.; Kirkwood, William G.

1999-01-01

Suggests that applicant impression management (AIM) is more harmful to employment interviewing than is currently suspected. Offers a conceptual model of AIM that is consistent with employment interviewing practice. Presents and critiques three arguments used to defend AIM. Examines a model for helping employers conduct interviews that minimize the…

Dispositional malevolence and impression formation: Dark Tetrad associations with accuracy and positivity in first impressions.

Science.gov (United States)

Rogers, Katherine H; Le, Marina T; Buckels, Erin E; Kim, Mikayla; Biesanz, Jeremy C

2018-02-19

The Dark Tetrad traits (subclinical psychopathy, narcissism, Machiavellianism, and everyday sadism) have interpersonal consequences. At present, however, how these traits are associated with the accuracy and positivity of first impressions is not well understood. The present article addresses three primary questions. First, to what extent are perceiver levels of Dark Tetrad traits associated with differing levels of perceptive accuracy? Second, to what extent are target levels of Dark Tetrad traits associated with differing levels of expressive accuracy? Finally, to what extent can Dark Tetrad traits be differentiated when examining perceptions of and by others? In a round-robin design, undergraduate participants (N = 412) in small groups engaged in brief, naturalistic, unstructured dyadic interactions before providing impressions of their partner. Dark Tetrad traits were associated with being viewed and viewing others less distinctively accurately and more negatively. Interpersonal perceptions that included an individual scoring highly on one of the Dark Tetrad traits differed in important ways from interactions among individuals with more benevolent personalities. Notably, despite the similarities between the Dark Tetrad, traits had unique associations with interpersonal perceptions. © 2018 Wiley Periodicals, Inc.

Clinical evaluation of the efficacy of removing microorganisms to disinfect patient-derived dental impressions.

Science.gov (United States)

Egusa, Hiroshi; Watamoto, Takao; Matsumoto, Takuya; Abe, Keiko; Kobayashi, Munemasa; Akashi, Yoshihiro; Yatani, Hirofumi

2008-01-01

Disinfection of dental impressions is an indispensable procedure for the control of cross-contamination; however, there is limited information on the efficacy of disinfection under clinical conditions. The objective of this study was to clinically evaluate the disinfection efficacy of commercially available agents in removing oral pathogens from patient-derived impressions. Impressions from 54 patients were divided into groups and either left undisinfected or underwent 1 of 5 disinfection treatments: (1) 2% glutaraldehyde (GA), (2) 1% sodium hypochlorite (SH), (3) 0.25% benzalkonium chloride (BC), (4) 1 ppm ozonated water (OW), or (5) the Hygojet/MD520 system (HJ). An impression culture technique using a brain heart infusion agar medium was used to visualize the microbial contamination on the surface of the impression cultures. The persistent presence of oral pathogens on the impression cultures was examined using selective isolation agar plates. The isolation frequencies of streptococci, staphylococci, Candida, methicillin-resistant Staphylococcus aureus, and Pseudomonas aeruginosa species from undisinfected impressions were 100%, 55.6%, 25.9%, 25.9% and 5.6%, respectively. Disinfection with HJ and BC removed the microorganisms with the greatest efficacy, followed by GA, SH, and OW. Potential bacterial contamination could be detected even after disinfection had been performed. Combined use of BC plus GA or SH removed oral pathogens almost completely from dental impressions. This investigation showed that potential contaminants are still present, even after general disinfection procedures. Therefore, either HJ or the combined use of BC with GA or SH is recommended for clinical and laboratory use.

Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions.

Science.gov (United States)

Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin; Hwang, Hyeon-Shik

2016-05-01

To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions were stored under ambient conditions, and scanned by CBCT immediately after the impressions were taken, and then at 1 hour intervals for 6 hours. After reconstructing three-dimensional digital dental models, the models were measured and the data were analyzed to determine dimensional changes according to the elapsed time. The changes within the measurement error were regarded as clinically acceptable in this study. All measurements showed a decreasing tendency with an increase in the elapsed time after the impressions. Although the extended-pour alginate exhibited a less decreasing tendency than the other 2 materials, there were no statistically significant differences between the materials. Changes above the measurement error occurred between the time points of 3 and 4 hours after the impressions. The results of this study indicate that digital dental models can be obtained simply from a CBCT scan of alginate impressions without sending them to a remote laboratory. However, when the impressions are not stored under special conditions, they should be scanned immediately, or at least within 2 to 3 hours after the impressions are taken.

Comparative Evaluation of Dimensional Accuracy of Elastomeric Impression Materials when Treated with Autoclave, Microwave, and Chemical Disinfection.

Science.gov (United States)

Kamble, Suresh S; Khandeparker, Rakshit Vijay; Somasundaram, P; Raghav, Shweta; Babaji, Rashmi P; Varghese, T Joju

2015-09-01

Impression materials during impression procedure often get infected with various infectious diseases. Hence, disinfection of impression materials with various disinfectants is advised to protect the dental team. Disinfection can alter the dimensional accuracy of impression materials. The present study was aimed to evaluate the dimensional accuracy of elastomeric impression materials when treated with different disinfectants; autoclave, chemical, and microwave method. The impression materials used for the study were, dentsply aquasil (addition silicone polyvinylsiloxane syringe and putty), zetaplus (condensation silicone putty and light body), and impregum penta soft (polyether). All impressions were made according to manufacturer's instructions. Dimensional changes were measured before and after different disinfection procedures. Dentsply aquasil showed smallest dimensional change (-0.0046%) and impregum penta soft highest linear dimensional changes (-0.026%). All the tested elastomeric impression materials showed some degree of dimensional changes. The present study showed that all the disinfection procedures produce minor dimensional changes of impression material. However, it was within American Dental Association specification. Hence, steam autoclaving and microwave method can be used as an alternative method to chemical sterilization as an effective method.

A Simplified Technique for Implant-Abutment Level Impression after Soft Tissue Adaptation around Provisional Restoration

Science.gov (United States)

Kutkut, Ahmad; Abu-Hammad, Osama; Frazer, Robert

2016-01-01

Impression techniques for implant restorations can be implant level or abutment level impressions with open tray or closed tray techniques. Conventional implant-abutment level impression techniques are predictable for maximizing esthetic outcomes. Restoration of the implant traditionally requires the use of the metal or plastic impression copings, analogs, and laboratory components. Simplifying the dental implant restoration by reducing armamentarium through incorporating conventional techniques used daily for crowns and bridges will allow more general dentists to restore implants in their practices. The demonstrated technique is useful when modifications to implant abutments are required to correct the angulation of malpositioned implants. This technique utilizes conventional crown and bridge impression techniques. As an added benefit, it reduces costs by utilizing techniques used daily for crowns and bridges. The aim of this report is to describe a simplified conventional impression technique for custom abutments and modified prefabricated solid abutments for definitive restorations. PMID:29563457

A Simplified Technique for Implant-Abutment Level Impression after Soft Tissue Adaptation around Provisional Restoration

Directory of Open Access Journals (Sweden)

Ahmad Kutkut

2016-05-01

Full Text Available Impression techniques for implant restorations can be implant level or abutment level impressions with open tray or closed tray techniques. Conventional implant-abutment level impression techniques are predictable for maximizing esthetic outcomes. Restoration of the implant traditionally requires the use of the metal or plastic impression copings, analogs, and laboratory components. Simplifying the dental implant restoration by reducing armamentarium through incorporating conventional techniques used daily for crowns and bridges will allow more general dentists to restore implants in their practices. The demonstrated technique is useful when modifications to implant abutments are required to correct the angulation of malpositioned implants. This technique utilizes conventional crown and bridge impression techniques. As an added benefit, it reduces costs by utilizing techniques used daily for crowns and bridges. The aim of this report is to describe a simplified conventional impression technique for custom abutments and modified prefabricated solid abutments for definitive restorations.

Effects of Aging on General and Specific Memory for Impressions

Directory of Open Access Journals (Sweden)

Megan J. Limbert

2018-05-01

Full Text Available Despite the number of documented declines in memory with age, memory for socioemotional information can be preserved into older adulthood. These studies assessed whether memory for character information could be preserved with age, and how the general versus specific nature of the information tested affected outcomes. We hypothesized that memory for general impressions would be preserved with age, but that memory for specific details would be impaired. In two experiments, younger and older adults learned character information about individuals characterized as positive, neutral, or negative. Participants then retrieved general impressions and specific information for each individual. The testing conditions in Experiment 2 discouraged deliberate recall. In Experiment 1, we found that younger performed better than older adults on both general and specific memory measures. Although age differences in memory for specific information persisted in Experiment 2, we found that younger and older adults remembered general impressions to a similar extent when testing conditions encouraged the use of “gut impressions” rather than deliberate retrieval from memory. We conclude that aging affects memory for specific character information, but memory for general impressions can be age-equivalent. Furthermore, there is no evidence for a positivity bias or differences in the effects of valence on memory across the age groups.

White light scanner-based repeatability of 3-dimensional digitizing of silicon rubber abutment teeth impressions.

Science.gov (United States)

Jeon, Jin-Hun; Lee, Kyung-Tak; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Woong-Chul

2013-11-01

The aim of this study was to evaluate the repeatability of the digitizing of silicon rubber impressions of abutment teeth by using a white light scanner and compare differences in repeatability between different abutment teeth types. Silicon rubber impressions of a canine, premolar, and molar tooth were each digitized 8 times using a white light scanner, and 3D surface models were created using the point clouds. The size of any discrepancy between each model and the corresponding reference tooth were measured, and the distribution of these values was analyzed by an inspection software (PowerInspect 2012, Delcamplc., Birmingham, UK). Absolute values of discrepancies were analyzed by the Kruskal-Wallis test and multiple comparisons (α=.05). The discrepancy between the impressions for the canine, premolar, and molar teeth were 6.3 µm (95% confidence interval [CI], 5.4-7.2), 6.4 µm (95% CI, 5.3-7.6), and 8.9 µm (95% CI, 8.2-9.5), respectively. The discrepancy of the molar tooth impression was significantly higher than that of other tooth types. The largest variation (as mean [SD]) in discrepancies was seen in the premolar tooth impression scans: 26.7 µm (95% CI, 19.7-33.8); followed by canine and molar teeth impressions, 16.3 µm (95% CI, 15.3-17.3), and 14.0 µm (95% CI, 12.3-15.7), respectively. The repeatability of the digitizing abutment teeth's silicon rubber impressions by using a white light scanner was improved compared to that with a laser scanner, showing only a low mean discrepancy between 6.3 µm and 8.9 µm, which was in an clinically acceptable range. Premolar impression with a long and narrow shape showed a significantly larger discrepancy than canine and molar impressions. Further work is needed to increase the digitizing performance of the white light scanner for deep and slender impressions.

Subjective relevance of objective measures for spatial impression (A)

DEFF Research Database (Denmark)

Wang, Lily M.; Gade, Anders Christian

2000-01-01

Several objective measures have been proposed to describe the feeling of spatial impression in concert halls, including Lateral Energy Fraction (LF) and Interaural Cross-Correlation Coefficient (IACC). However, previous studies have shown that LF and IACC values did not highly correlate with each...... other at individual seat positions in real halls [J. S. Bradley, J. Acoust. Soc. Am. 96, 3525–3535 (1994)]. To investigate the listener envelopment aspect of spatial impression further, subjective paired-comparison tests have been run using signals which have various values for LF, early IACC (from 5...

In-vitro evaluation of the accuracy of conventional and digital methods of obtaining full-arch dental impressions.

Science.gov (United States)

Ender, Andreas; Mehl, Albert

2015-01-01

To investigate the accuracy of conventional and digital impression methods used to obtain full-arch impressions by using an in-vitro reference model. Eight different conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; and irreversible hydrocolloid, ALG) and digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; and Lava COS, LAV) full-arch impressions were obtained from a reference model with a known morphology, using a highly accurate reference scanner. The impressions obtained were then compared with the original geometry of the reference model and within each test group. A point-to-point measurement of the surface of the model using the signed nearest neighbour method resulted in a mean (10%-90%)/2 percentile value for the difference between the impression and original model (trueness) as well as the difference between impressions within a test group (precision). Trueness values ranged from 11.5 μm (VSE) to 60.2 μm (POE), and precision ranged from 12.3 μm (VSE) to 66.7 μm (POE). Among the test groups, VSE, VSES, and CER showed the highest trueness and precision. The deviation pattern varied with the impression method. Conventional impressions showed high accuracy across the full dental arch in all groups, except POE and ALG. Conventional and digital impression methods show differences regarding full-arch accuracy. Digital impression systems reveal higher local deviations of the full-arch model. Digital intraoral impression systems do not show superior accuracy compared to highly accurate conventional impression techniques. However, they provide excellent clinical results within their indications applying the correct scanning technique.

Lasting Impressions: Hannah Arendt's Educational Legacy

Science.gov (United States)

Gardiner, Rita A.

2016-01-01

Hannah Arendt's work is gaining increasing recognition in educational administration. But less has been written about her as an educator, colleague, and provocateur. Here, I explore the lasting impressions that Arendt had on former students, colleagues, and friends. This exploration is conducted through the lens of Arendtian narrative inquiry. For…

Digital versus conventional implant impressions for partially edentulous arches: An evaluation of accuracy.

Science.gov (United States)

Marghalani, Amin; Weber, Hans-Peter; Finkelman, Matthew; Kudara, Yukio; El Rafie, Khaled; Papaspyridakos, Panos

2018-04-01

To the authors' knowledge, while accuracy outcomes of the TRIOS scanner have been compared with conventional impressions, no available data are available regarding the accuracy of digital scans with the Omnicam and True Definition scanners versus conventional impressions for partially edentulous arches. The purpose of this in vitro study was to compare the accuracy of digital implant scans using 2 different intraoral scanners (IOSs) with that of conventional impressions for partially edentulous arches. Two partially edentulous mandibular casts with 2 implant analogs with a 30-degree angulation from 2 different implant systems (Replace Select RP; Nobel Biocare and Tissue level RN; Straumann) were used as controls. Sixty digital models were made from these 2 definitive casts in 6 different groups (n=10). Splinted implant-level impression procedures followed by digitization were used to produce the first 2 groups. The next 2 groups were produced by digital scanning with Omnicam. The last 2 groups were produced by digital scanning with the True Definition scanner. Accuracy was evaluated by superimposing the digital files of each test group onto the digital file of the controls with inspection software. The difference in 3-dimensional (3D) deviations (median ±interquartile range) among the 3 impression groups for Nobel Biocare was statistically significant among all groups (P3D deviations among the 3 impression groups for Straumann was statistically significant among all groups (P=.003), except for the conventional impression (22 ±5 μm) and True Definition (17 ±5 μm) groups; the median ±interquartile range for the Omnicam group was 26 ±15 μm. The difference in 3D deviations between the 2 implant systems was significant for the Omnicam (P=.011) and conventional (Pimpression techniques but not for the True Definition technique (P=.247). Within the limitations of this study, both the impression technique and the implant system affected accuracy. The True

Impression Management in Social Media: The Example of LinkedIn

OpenAIRE

Joanna Paliszkiewicz; Magdalena Madra-Sawicka

2016-01-01

Nowadays, the relationships are often initiated and maintained in online environments, the formation and management of online impressions have gained importance and become the subject of numerous studies. The impression management is a conscious process in which people attempt to influence the perceptions of their image. They do it by controlling and managing information presented in social media. The presentation of identity is the key to success or failure for example i...

Physical properties and compatibility with dental stones of current alginate impression materials.

Science.gov (United States)

Murata, H; Kawamura, M; Hamada, T; Chimori, H; Nikawa, H

2004-11-01

This study examined physical properties and compatibility with dental stones of two types of alginate impression materials. Five powder-type alginate impression materials (Alginoplast EM, Aroma Fine, Algiace Z, Coe Alginate, Jeltrate Plus) and a paste-type alginate impression material (Tokuso AP-1) were used. The dynamic viscosity immediately after mixing was measured by means of a controlled-stress rheometer. The gelation times were determined according to Japanese Industrial Standards (JIS) T6505, and recovery from deformation, strain in compression and compressive strength were determined according to the International Organization for Standardization (ISO) specification 1563. Detail reproduction and surface roughness of type III dental stones (New Plastone, New Sunstone) and a type IV dental stone (Die Stone) were evaluated using a ruled test block as specified in the ISO specification 1563 and a profilometer, respectively. The alginate impression materials evaluated in this study were all in compliance with the ISO specification 1563 and JIS T6505. The alginate impression materials had similar mechanical properties after gelation, whilst a wide range of dynamic viscosity immediately after being mixed, gelation times and compatibility with dental stones were found among the materials. The paste-type material had a higher dynamic viscosity and a shorter gelation time than the powder-type materials. The best surface quality was obtained with the paste-type material/type III dental stone cast combinations. The materials should be selected in consideration of initial flow, setting characteristics and compatibility with dental stones. The results suggested that a paste-type material would better meet the requirements of an alginate impression material.

Effects of immersion disinfection of agar-alginate combined impressions on the surface properties of stone casts.

Science.gov (United States)

Iwasaki, Yukiko; Hiraguchi, Hisako; Iwasaki, Eriko; Yoneyama, Takayuki

2016-01-01

This study investigated the effects of disinfection of agar-alginate combined impressions on the surface properties of the resulting stone casts. Two brands of cartridge-form agar impression material and one alginate impression material were used. Agar-alginate combined impressions of smooth glass plates were prepared. The impressions were immersed in 0.55% ortho-phthalaldehyde solution or 0.5% sodium hypochlorite solution for 1, 3, 5 and 10 min. A stone cast made with an impression that had not been immersed was prepared as a control. The surface roughness (Ra) of the stone casts was measured, and the cast surfaces were observed by SEM. Immersion of agar-alginate combined impressions in 0.5% sodium hypochlorite solution for up to 10 min had no serious adverse effects on the surface properties of the stone casts. In contrast, even 1 min of immersion in 0.55% ortho-phthalaldehyde solution caused deterioration of the cast surface properties.

Impression Management in the Ethical Self-Presentation of Offenders Undergoing Presentence Evaluation

Science.gov (United States)

Holland, Terrill R.; Boik, Robert J.

1978-01-01

Ethical choices were assessed for offenders instructed to produce favorable versus unfavorable impressions. Pronounced impression management effects were obtained for prosocial and antisocial responses, and high scores on a dimension of change defined by these variables were related to sociopathic features on the MMPI. (Author)

Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions

Science.gov (United States)

Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin

2016-01-01

Objective To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Methods Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions were stored under ambient conditions, and scanned by CBCT immediately after the impressions were taken, and then at 1 hour intervals for 6 hours. After reconstructing three-dimensional digital dental models, the models were measured and the data were analyzed to determine dimensional changes according to the elapsed time. The changes within the measurement error were regarded as clinically acceptable in this study. Results All measurements showed a decreasing tendency with an increase in the elapsed time after the impressions. Although the extended-pour alginate exhibited a less decreasing tendency than the other 2 materials, there were no statistically significant differences between the materials. Changes above the measurement error occurred between the time points of 3 and 4 hours after the impressions. Conclusions The results of this study indicate that digital dental models can be obtained simply from a CBCT scan of alginate impressions without sending them to a remote laboratory. However, when the impressions are not stored under special conditions, they should be scanned immediately, or at least within 2 to 3 hours after the impressions are taken. PMID:27226958

pipelines cathodic protection design methodologies for impressed

African Journals Online (AJOL)

HOD

oil and gas pipelines corrosion in the United State of. American alone ... or preventing external corrosion of pipeline steels and other metallic .... 2.1 Materials and Impressed Current Design. Carbon steel ..... Research Analysis, Vol. 2, pp 2277 ...

Estimation of stature from hand impression: a nonconventional approach.

Science.gov (United States)

Ahemad, Nasir; Purkait, Ruma

2011-05-01

Stature is used for constructing a biological profile that assists with the identification of an individual. So far, little attention has been paid to the fact that stature can be estimated from hand impressions left at scene of crime. The present study based on practical observations adopted a new methodology of measuring hand length from the depressed area between hypothenar and thenar region on the proximal surface of the palm. Stature and bilateral hand impressions were obtained from 503 men of central India. Seventeen dimensions of hand were measured on the impression. Linear regression equations derived showed hand length followed by palm length are best estimates of stature. Testing the practical utility of the suggested method on latent prints of 137 subjects, a statistically insignificant result was obtained when known and estimated stature derived from latent prints was compared. The suggested approach points to a strong possibility of its usage in crime scene investigation, albeit the fact that validation studies in real-life scenarios are performed. © 2011 American Academy of Forensic Sciences.

Effect of mixing techniques on bacterial attachment and disinfection time of polyether impression material.

Science.gov (United States)

Guler, Umut; Budak, Yasemin; Ruh, Emrah; Ocal, Yesim; Canay, Senay; Akyon, Yakut

2013-09-01

The aim of this study was 2-fold. The first aim was to evaluate the effects of mixing technique (hand-mixing or auto-mixing) on bacterial attachment to polyether impression materials. The second aim was to determine whether bacterial attachment to these materials was affected by length of exposure to disinfection solutions. Polyether impression material samples (n = 144) were prepared by hand-mixing or auto-mixing. Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa were used in testing. After incubation, the bacterial colonies were counted and then disinfectant solution was applied. The effect of disinfection solution was evaluated just after the polymerization of impression material and 30 min after polymerization. Differences in adherence of bacteria to the samples prepared by hand-mixing and to those prepared by auto-mixing were assessed by Kruskal-Wallis and Mann-Whitney U-tests. For evaluating the efficiency of the disinfectant, Kruskal-Wallis multiple comparisons test was used. E. coli counts were higher in hand-mixed materials (P 2.394). The methods used for mixing polyether impression material did not affect bacterial attachment to impression surfaces. In contrast, the disinfection procedure greatly affects decontamination of the impression surface.

Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues.

Directory of Open Access Journals (Sweden)

Ning Gan

Full Text Available Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95μm and precision was (55.26±11.21μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78μm and precision was (59.52±11.29μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (p0.05, but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016. A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r = 0.485, p = 0.002 for full dentitions. It was feasible to use the intraoral scanner to obtain digital impressions for whole upper jaws. Wider dental arch contributed to lower precision of an intraoral

Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues.

Science.gov (United States)

Gan, Ning; Xiong, Yaoyang; Jiao, Ting

2016-01-01

Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (pimpressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r

Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues

Science.gov (United States)

Gan, Ning; Xiong, Yaoyang; Jiao, Ting

2016-01-01

Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (pimpressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r

You are what you wear: Brand personality influences on consumer impression formation

NARCIS (Netherlands)

Fennis, B.M.; Pruyn, Adriaan T.H.

2007-01-01

The present study examines the role of brands in the process of impression formation. The article examines the hypothesis that brand personality traits may carry over and affect perceptions of the personality of the brand's owner. Based on the continuum model of impression formation the findings

Evaluating the marginal fit of zirconia copings with digital impressions with an intraoral digital scanner.

Science.gov (United States)

An, Shinyoung; Kim, Sungtae; Choi, Hyunmin; Lee, Jae-Hoon; Moon, Hong-Seok

2014-11-01

Digital impression systems have been developed to overcome the disadvantages associated with conventional impression methods. The purpose of this study was to compare the marginal fit of zirconia copings designed with the use of an iTero digital scanner with those designed by the conventional impression technique. Thirty identical cast, base-metal dies from 1 maxillary central incisor prepared for a ceramic crown restoration were fabricated. For the conventional impression group (CI), base metal dies (n=10) were replicated as stone dies by means of a conventional impression technique with polyvinyl siloxane material. For the iTero with polyurethane group (iP), base metal dies (n=10) were replicated as polyurethane dies with the iTero digital impression system. For the iTero with no dies group (iNo), base metal dies (n=10) were scanned with the iTero digital impression system, but no dies were fabricated. For each group, 10 zirconia copings were fabricated based on the stone dies (CI group), polyurethane dies (iP group), or stereolithography files (iNo group). The marginal gap of each specimen was measured with a light microscope at ×50 magnification. One-way analysis of variance and the Tukey honestly significant difference test were used for statistical analysis (α=.05). Statistically significant differences were found between the CI group and iP group (Pdigital impression method than in the group that used the conventional impression method. However, the marginal discrepancies of all of the groups were clinically acceptable. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Teaching: First Impressions First, or Choosing Atmosphere over Method and Management

Science.gov (United States)

Levy, Aaron

2004-01-01

As a writer who teaches and a teacher who writes, this author offers creative ways of producing a positive first impression on the first day of school. The key is finding a way to surprise one's students and creating first impressions that somehow introduces the tone a teacher wants his or her class to have. The author has learned that if he can…

Effect of fluoride addition on the properties of dental alginate impression materials.

Science.gov (United States)

Lee, Yong-Keun; Lim, Bum-Soon; Kim, Cheol-We

2004-03-01

Fluoride-containing dental alginate impression materials can exert a considerable reduction in enamel solubility. The objective was to evaluate the effects of fluoride addition in the alginate impression materials on the properties and subsequent release of fluoride. Four experimental alginate impression materials were studied. Materials were mixed with distilled water (control) or 100-ppm fluoride solution. One or two percent NaF, or 1% SnF2 was added to the materials, which were mixed with distilled water. Fluoride release, flexibility, recovery from deformation, setting time, compressive strength and elastic modulus were determined in accordance with the ISO 1563 and ANSI/ADA Spec. 18. Fluoride release increased after addition of fluoride, and the released amount was 0.762-14.761 ppm. Addition of NaF or SnF2 resulted in higher fluoride release than the control group (p alginate impression material may result in effective release of fluoride without deteriorating the properties of material itself.

Impression management and self-presentation dissimulation in Portuguese chairman's statements

OpenAIRE

Oliveira, J.; Azevedo, G.; Borges, F.

2016-01-01

WOS:000381979800008 (Nº de Acesso Web of Science) Drawn on social psychology theory of impression management, the present study tries to assess the way Portuguese managers build their narratives in Chairman’s Statement to manage stakeholders’ perceptions on corporate image, in a period of time of scarce resources. The paper’s theoretical framework draws on elements of social psychology theory of impression management developed by Leary and Kowalski (1990). Through the use of the two-compon...

Expression and Bodily Faith in Natalie Heller’s First Impressions

Directory of Open Access Journals (Sweden)

Adam Loughnane

2016-07-01

Full Text Available In this essay I place choreographer Natalie Heller in dialogue with Merleau-Ponty on issues of motor-perception, expression and bodily faith. I analyze her new work First Impressions to demonstrate how she responds to a similar impulse that drove Merleau-Ponty’s phenomenology, particularly in his last writing, The Visible and the Invisible. Both Heller and Merleau-Ponty seek to go beyond the representational understanding of motion and perception in order to articulate and experiment with a type of expression, which is beyond the distinctions between motion and motionlessness, activity and passivity, visibility and invisibility. While Merleau-Ponty writes about this form of expression, Heller’s performers show that beyond these binaries is a form of expression that is ambiguously situated between impressing and being impressed upon, and that to engage the world or the city as such, requires a motor-perceptual form of faith.

Examination of the Position Accuracy of Implant Abutments Reproduced by Intra-Oral Optical Impression

Science.gov (United States)

Odaira, Chikayuki; Kobayashi, Takuya; Kondo, Hisatomo

2016-01-01

An impression technique called optical impression using intraoral scanner has attracted attention in digital dentistry. This study aimed to evaluate the accuracy of the optical impression, comparing a virtual model reproduced by an intraoral scanner to a working cast made by conventional silicone impression technique. Two implants were placed on a master model. Working casts made of plaster were fabricated from the master model by silicone impression. The distance between the ball abutments and the angulation between the healing abutments of 5 mm and 7 mm height at master model were measured using Computer Numerical Control Coordinate Measuring Machine (CNCCMM) as control. Working casts were then measured using CNCCMM, and virtual models via stereo lithography data of master model were measured by a three-dimensional analyzing software. The distance between ball abutments of the master model was 9634.9 ± 1.2 μm. The mean values of trueness of the Lava COS and working casts were 64.5 μm and 22.5 μm, respectively, greater than that of control. The mean of precision values of the Lava COS and working casts were 15.6 μm and 13.5 μm, respectively. In the case of a 5-mm-height healing abutment, mean angulation error of the Lava COS was greater than that of the working cast, resulting in significant differences in trueness and precision. However, in the case of a 7-mm-height abutment, mean angulation errors of the Lava COS and the working cast were not significantly different in trueness and precision. Therefore, distance errors of the optical impression were slightly greater than those of conventional impression. Moreover, the trueness and precision of angulation error could be improved in the optical impression using longer healing abutments. In the near future, the development of information technology could enable improvement in the accuracy of the optical impression with intraoral scanners. PMID:27706225

Linear dimensional stability of elastomeric impression materials over time.

Science.gov (United States)

Garrofé, Analía B; Ferrari, Beatriz A; Picca, Mariana; Kaplan, Andrea E

2011-01-01

The purpose of this study was to evaluate the linear dimensional stability of different elastomeric impression materials over time. A metal mold was designed with its custom trays, which were made of thermoplastic sheets (Sabilex sheets 0.125 mm thick). Three impressions were taken of it with each of the following: the polyvinylsiloxane Examix-GC-(AdEx), Aquasil-Dentsply-(AdAq) and Panasil-Kettenbach-(AdPa), and the polydimethylsiloxane Densell-Dental Medrano-(CoDe), Speedex-Coltene-(CoSp) and Lastic-Kettenbach-(CoLa). All impressions were taken with putty and light-body materials using a one-step technique. Standardized digital photographs were taken at different time intervals (0, 15, 30, 60, 120 minutes; 24 hours; 7 and 14 days), using an "ad-hoc" device, and analyzed using software (Image Tool) by measuring the distance between lines previously made at the top of the mold. The results were analyzed by ANOVA for repeated measures. The initial and final values for mean and SD were: AdEx: 1.32 (0.01) and 1.31 (0.00); AdAq: 1.32 (0.00) and 1.32 (0.00), AdPa: 1.327 (0.006) and 1.31 (0.00); CoDe: 1.32 (0.00) and 1.32 (0.01); CoSp: 1.327 (0.006) and 1.31 (0.00), CoLa: 1.327 (0.006) and 1.303 (0.006). Statistical evaluation showed that both material and time have significant effects. Under the conditions in this study we conclude that time would significantly affect the lineal dimensional stability of elastomeric impression materials.

Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions

OpenAIRE

Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin; Hwang, Hyeon-Shik

2016-01-01

Objective To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Methods Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions wer...

The effects of the adjunctive bupropion on male sexual dysfunction induced by a selective serotonin reuptake inhibitor: a double-blind placebo-controlled and randomized study.

Science.gov (United States)

Safarinejad, Mohammad Reza

2010-09-01

To determine the safety and efficacy of adjunctive bupropion sustained-release (SR) on male sexual dysfunction (SD) induced by a selective serotonin reuptake inhibitor (SSRI), as SD is a common side-effect of SSRIs and the most effective treatments have yet to be determined. The randomized sample consisted of 234 euthymic men who were receiving some type of SSRI. The men were randomly assigned to bupropion SR (150 mg twice daily, 117) or placebo (twice daily, 117) for 12 weeks. Efficacy was evaluated using the Clinical Global Impression-Sexual Function (CGI-SF; the primary outcome measure), the International Index of Erectile Function (IIEF), Arizona Sexual Experience Scale (ASEX), and Erectile Dysfunction Inventory of Treatment Satisfaction (EDITS) (secondary outcome measures). Participants were followed biweekly during study period. After 12 weeks of treatment, the mean (sd) scores for CGI-SF were significantly lower, i.e. better, in patients on bupropion SR, at 2.4 (1.2), than in the placebo group, at 3.9 (1.1) (P= 0.01). Men who received bupropion had a significant increase in the total IIEF score (54.4% vs 1.2%; P= 0.003), and in the five different domains of the IIEF. Total ASEX scores were significantly lower, i.e. better, among men who received bupropion than placebo, at 15.5 (4.3) vs 21.5 (4.7) (P= 0.002). The EDITS scores were 67.4 (10.2) for the bupropion and 36.3 (11.7) for the placebo group (P= 0.001). The ASEX score and CGI-SF score were correlated (P= 0.003). In linear regression analyses the CGI-SF score was not affected significantly by the duration of SD, type of SSRI used and age. Bupropion is an effective treatment for male SD induced by SSRIs. These results provide empirical support for conducting a further study of bupropion.

Marginal and internal fit of cobalt-chromium fixed dental prostheses generated from digital and conventional impressions.

Science.gov (United States)

Svanborg, Per; Skjerven, Henrik; Carlsson, Pablo; Eliasson, Alf; Karlsson, Stig; Ortorp, Anders

2014-01-01

Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs) fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produced using vinyl polysiloxane (VPS) impression material. A triple-scan protocol and CAD software were used for measuring and calculating discrepancies of the FDPs at 3 standard areas: mean internal discrepancy, absolute marginal gap, and cervical area discrepancy. The Mann-Whitney U test was used for analyzing the results. Results. For conventional and digital impressions, respectively, FDPs had an absolute marginal gap of 147  μ m and 142  μ m, cervical area discrepancy of 69  μ m and 44  μ m, and mean internal discrepancy of 117  μ m and 93  μ m. The differences were statistically significant in the cervical and internal areas (P digital impression technique is more exact and can generate 3-unit FDPs with a significantly closer fit compared to the VPS technique.

Effect of disinfection on irreversible hydrocolloid and alternative impression materials and the resultant gypsum casts.

Science.gov (United States)

Suprono, Montry S; Kattadiyil, Mathew T; Goodacre, Charles J; Winer, Myron S

2012-10-01

Many new products have been introduced and marketed as alternatives to traditional irreversible hydrocolloid materials. These alternative materials have the same structural formula as addition reaction silicone, also known as vinyl polysiloxane (VPS), impression materials. Currently, there is limited in vitro and in vivo research on these products, including on the effects of chemical disinfectants on the materials. The purpose of this study was to compare the effects of a spray disinfecting technique on a traditional irreversible hydrocolloid and 3 new alternative impression materials in vitro. The tests were performed in accordance with the American National Standards Institute/American Dental Association (ANSI/ADA) Specification Nos. 18 and 19. Under standardized conditions, 100 impressions were made of a ruled test block with an irreversible hydrocolloid and 3 alternative impression materials. Nondisinfected irreversible hydrocolloid was used as the control. The impressions were examined for surface detail reproduction before and after disinfection with a chloramine-T product. Type III and Type V dental stone casts were evaluated for linear dimensional change and gypsum compatibility. Comparisons of linear dimensional change were analyzed with 2-way ANOVA of mean ranks with the Scheffé post hoc comparisons (α=.05). Data for surface detail reproduction were analyzed with the Wilcoxon Signed-Rank procedure and gypsum compatibility with the Kruskal-Wallis Rank procedure (α=.05). The alternative impression materials demonstrated significantly better outcomes with all 3 parameters tested. Disinfection with chloroamine-T did not have any effect on the 3 alternative impression materials. The irreversible hydrocolloid groups produced the most variability in the measurements of linear dimensional change. All of the tested materials were within the ADA's acceptable limit of 1.0% for linear dimensional change, except for the disinfected irreversible hydrocolloid

GeoSciML v3.0 - a significant upgrade of the CGI-IUGS geoscience data model

Science.gov (United States)

Raymond, O.; Duclaux, G.; Boisvert, E.; Cipolloni, C.; Cox, S.; Laxton, J.; Letourneau, F.; Richard, S.; Ritchie, A.; Sen, M.; Serrano, J.-J.; Simons, B.; Vuollo, J.

2012-04-01

GeoSciML version 3.0 (http://www.geosciml.org), released in late 2011, is the latest version of the CGI-IUGS* Interoperability Working Group geoscience data interchange standard. The new version is a significant upgrade and refactoring of GeoSciML v2 which was released in 2008. GeoSciML v3 has already been adopted by several major international interoperability initiatives, including OneGeology, the EU INSPIRE program, and the US Geoscience Information Network, as their standard data exchange format for geoscience data. GeoSciML v3 makes use of recently upgraded versions of several Open Geospatial Consortium (OGC) and ISO data transfer standards, including GML v3.2, SWE Common v2.0, and Observations and Measurements v2 (ISO 19156). The GeoSciML v3 data model has been refactored from a single large application schema with many packages, into a number of smaller, but related, application schema modules with individual namespaces. This refactoring allows the use and future development of modules of GeoSciML (eg; GeologicUnit, GeologicStructure, GeologicAge, Borehole) in smaller, more manageable units. As a result of this refactoring and the integration with new OGC and ISO standards, GeoSciML v3 is not backwardly compatible with previous GeoSciML versions. The scope of GeoSciML has been extended in version 3.0 to include new models for geomorphological data (a Geomorphology application schema), and for geological specimens, geochronological interpretations, and metadata for geochemical and geochronological analyses (a LaboratoryAnalysis-Specimen application schema). In addition, there is better support for borehole data, and the PhysicalProperties model now supports a wider range of petrophysical measurements. The previously used CGI_Value data type has been superseded in favour of externally governed data types provided by OGC's SWE Common v2 and GML v3.2 data standards. The GeoSciML v3 release includes worked examples of best practice in delivering geochemical

Surface roughness of polyvinyl siloxane impression materials following chemical disinfection, autoclave and microwave sterilization.

Science.gov (United States)

Al Kheraif, Abdulaziz Abdullah

2013-05-01

Autoclave sterilization and microwave sterilization has been suggested as the effective methods for the disinfection of elastomeric impressions, but subjecting elastomeric impressions to extreme temperature may have adverse effects on critical properties of the elastomers. To evaluate the effect of chemical disinfection as well as autoclave and microwave sterilization on the surface roughness of elastomeric impression materials. The surface roughness of five commercially available polyvinyl siloxane impression materials (Coltene President, Affinis Perfect impression, Aquasil, 3M ESPE Express and GC Exafast) were evaluated after subjecting them to chemical disinfection, autoclaving and microwave sterilization using a Talysurf Intra 50 instrument. Twenty specimens from each material were fabricated and divided into four equal groups, three experimental and one control (n=25). The differences in the mean surface roughness between the treatment groups were recorded and statistically analyzed. No statistically significant increase in the surface roughness was observed when the specimens were subjected to chemical disinfection and autoclave sterilization, increase in roughness and discoloration was observed in all the materials when specimens were subjected to microwave sterilization. Chemical disinfection did not have a significant effect but, since it is less effective, autoclave sterilization can be considered effective and autoclaving did not show any specimen discoloration as in microwave sterilization. Microwave sterilization may be considered when impressions are used to make diagnostic casts. A significant increase in surface roughness may produce rougher casts, resulting in rougher tissue surfaces for denture and cast restorations. Autoclave sterilization of vinyl polysiloxane elastomeric impressions for 5 minutes at 134°C at 20 psi may be considered an effective method over chemical disinfection and microwave sterilization, because chemical disinfection does

Accuracy of Gypsum Casts after Different Impression Techniques and Double Pouring.

Directory of Open Access Journals (Sweden)

Stephania Caroline Rodolfo Silva

Full Text Available This study evaluated the accuracy of gypsum casts after different impression techniques and double pouring. Ten patients were selected and for each one it was obtained 5 partial putty/wash impressions with vinyl polysiloxane (VPS material from teeth #13 to #16 with partial metal stock trays. The following techniques were performed: (1 one-step; two-step relief with: (2 PVC film; (3 slow-speed tungsten carbide bur and scalpel blade, (4 small movements of the tray and (5 without relief-negative control. The impressions were disinfected with 0.5% sodium hypochlorite for 10 minutes and stored during 110 and 230 minutes for the first and second pouring, respectively, with type IV gypsum. Three intra-oral lateral photographs of each patient were taken using a tripod and a customized radiographic positioner. The images were imported into ImageJ software and the total area of the buccal surface from teeth #13 to #16 was measured. A 4.0% coefficient of variance was criterion for using these measurements as Baseline values. The casts were photographed and analyzed using the same standardization for the clinical images. The area (mm2 obtained from the difference between the measurements of each gypsum cast and the Baseline value of the respective patient were calculated and analyzed by repeated-measures two way-ANOVA and Mauchly's Sphericity test (α = 0.05. No significant effect was observed for Impression technique (P = 0.23, Second pouring (P = 0.99 and their interaction (P = 0.25. The impression techniques and double pouring did not influence the accuracy of the gypsum casts.

GLOBALIZATION AND FOREIGN DIRECT INVESTMENTS

Directory of Open Access Journals (Sweden)

Elena Chirilă – Donciu

2013-07-01

Full Text Available Mobilizing financial resources to cover investment needs is a concern of all countries, developed or developing ones, of consolidated market economies or emerging ones. A distinctive characteristic of Global Economy over the last few decades has been the rising rate and impressive increase in Foreign Direct Investment (FDI. The purpose of this research is to analyse global FDI inflows in Europe and in Romania. The results of the research support the idea that the balance of economic power is changing in the world economy and the countries that own a stable and solid industrial base are at an advantage. The new trends determined by the economic crisis in the field of FDI refer to the growing percentage of developing and emerging countries in the global flows of FDI.

Accuracy of various impression materials and methods for two implant systems: An effect size study.

Science.gov (United States)

Schmidt, Alexander; Häussling, Teresa; Rehmann, Peter; Schaaf, Heidrun; Wöstmann, Bernd

2018-04-01

An accurate impression is required for implant treatment. The aim of this in-vitro study was to determine the effect size of the impression material/method, implant system and implant angulation on impression transfer precision. An upper jaw model with three BEGO and three Straumann implants (angulations 0°, 15°, 20°) in the left and right maxilla was used as a reference model. One polyether (Impregum Penta) and two polyvinyl siloxanes (Flexitime Monophase/Aquasil Ultra Monophase) were examined with two impression techniques (open and closed tray). A total of 60 impressions were made. A coordinate measurement machine was used to measure the target variables for 3D-shift, implant axis inclination and implant axis rotation. All the data were subjected to a four-way ANOVA. The effect size (partial eta-squared [η 2 P ]) was reported. The impression material had a significant influence on the 3D shift and the implant axis inclination deviation (p-values=.000), and both factors had very large effect sizes (3D-shift [η 2 P ]=.599; implant axis inclination [η 2 P ]=.298). Impressions made with polyvinyl siloxane exhibited the highest transfer precision. When the angulation of the implants was larger, more deviations occurred for the implant axis rotational deviation. The implant systems and impression methods showed partially significant variations (p-values=.001-.639) but only very small effect sizes (η 2 P =.001-.031). The impression material had the greatest effect size on accuracy in terms of the 3D shift and the implant axis inclination. For multiunit restorations with disparallel implants, polyvinyl siloxane materials should be considered. In addition, the effect size of a multivariate investigation should be reported. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Effect of digital impressions and production protocols on the adaptation of zirconia copings.

Science.gov (United States)

Kocaağaoğlu, Hasan; Kılınç, Halil Ibrahim; Albayrak, Haydar

2017-01-01

Proper marginal, axial, and occlusal adaptation of dental restorations is essential for their long-term success. Production protocols including digital impression systems have been developed, but little information is available on the adaptation of zirconia restorations produced via them. The purpose of this in vitro study was to compare the effects of digital impression protocols on the marginal, axial, and occlusal adaptation of zirconia copings. Thirty extracted human maxillary premolar teeth without caries or defects were used. The teeth were prepared for zirconia crowns and randomly divided into 3 groups. Zirconia copings were designed at a thickness of 0.5 mm with 30 μm of simulated die spacer starting 1 mm from the margin of preparations. They were produced using computer-aided design-computer-aided manufacture (CAD-CAM) protocol with a conventional impression (group Cn) and 2 different production protocols with digital impressions (group C) and group Tr. The marginal, axial, and occlusal discrepancies of these copings were measured using the silicone replica technique with stereomicroscopy at ×50 magnification, and the data were analyzed with 1-way ANOVAs (α=.05). The mean marginal discrepancy values were 85.6 μm for group Cn, 58.7 μm for group C, and 47.7 μm for the Tr group. Significant differences were found among the production protocols in marginal, axial, and occlusal discrepancies (Pdigital impressions had significantly fewer marginal discrepancies than those of group Cn (P.05), and group Tr revealed the lowest axial discrepancy (P.05). The copings produced with the aid of digital impression systems exhibited better marginal and occlusal adaptation than those of the copings produced with the aid of conventional impression. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Disinfectant Efficacy of 0.525% Sodium Hypochlorite and Epimax on Alginate Impression Material.

Science.gov (United States)

Choudhury, Gopal Krishna; Chitumalla, Rajkiran; Manual, Litto; Rajalbandi, Santosh Kumar; Chauhan, Mahinder Singh; Talukdar, Pratim

2018-01-01

Species of Streptococcus, Escherichia coli, Staphylococcus, Actinomyces, Pseudomonas, Klebsiella, and Candida are commonly seen in the oral cavity. Impression materials are commonly contaminated with microorganisms. The present study was conducted to assess the disinfection efficacy of Epimax and 0.525% sodium hypochlorite on alginate impression over a period of 10 minutes. This study was conducted in the Department of Prosthodontics in the year 2015. An alginate impression material was prepared. For each bacteria species, 15 samples were used. Out of 15 samples, 3 were used by 0.525% sodium hypochlorite for disinfection for 5 minutes and 3 others for 10 minutes. Similarly, 3 samples were used by Epimax for 5 minutes and other 3 for 10 minutes. Three samples were used as controls. Each sample was polluted with Candida albicans, Pseudomonas aeruginosa, and Staphylococcus aureus strains. There was no statistical difference in P. aeruginosa and C. albicans after 5 minutes, whereas S. aureus showed significant difference (p alginate impression material against C. albicans, P. aeruginosa, and S. aureus strains. However, Epimax was found to be more effective against S. aureus as compared with 0.525% sodium hypochlorite. Efficacy of disinfection of sodium hypo-chlorite and Epimax on alginate impression.

Resistance to disinfection of a polymicrobial association contaminating the surface of elastomeric dental impressions.

Science.gov (United States)

Giammanco, Giovanni M; Melilli, Dario; Rallo, Antonio; Pecorella, Sonia; Mammina, Caterina; Pizzo, Giuseppe

2009-04-01

The aim of this study was to evaluate the ability to resist disinfection of a polymicrobial association contaminating the surface of dental impressions obtained with two different elastomers: a polyether (Impregum) and an addition-polymerized silicone (Elite). Impressions were contaminated with a mixture of three biofilm-forming microorganisms (Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans) and disinfected immediately after contamination, or after microbial layers were allowed to develop during a six-hour storage. Two commercial disinfectants were tested: MD 520 containing 0.5% glutaraldehyde and Sterigum Powder without glutaraldehyde. Residual contamination was recovered by mechanical rinsing immediately after disinfection and after a six-hour storage of disinfected impressions, and assessed by colony counting. Both disinfectants tested were shown to be effective in reducing the microbial presence on the impression materials, achieving at least a 102 reduction of microbial counts compared to water rinsing. However, Sterigum was generally less effective on the Elite elastomer and could not grant disinfection on six-hour aged P. aeruginosa and C. albicans microbial layers. The results of this study suggest that the materials used for the impressions influence the efficacy of disinfection. Disinfectants should be tested according to conditions encountered in everyday clinical practice and the need for immediate disinfection of impressions should be clearly indicated by manufacturers.

Dental impressions using 3D digital scanners: virtual becomes reality.

Science.gov (United States)

Birnbaum, Nathan S; Aaronson, Heidi B

2008-10-01

The technologies that have made the use of three-dimensional (3D) digital scanners an integral part of many industries for decades have been improved and refined for application to dentistry. Since the introduction of the first dental impressioning digital scanner in the 1980s, development engineers at a number of companies have enhanced the technologies and created in-office scanners that are increasingly user-friendly and able to produce precisely fitting dental restorations. These systems are capable of capturing 3D virtual images of tooth preparations, from which restorations may be fabricated directly (ie, CAD/CAM systems) or fabricated indirectly (ie, dedicated impression scanning systems for the creation of accurate master models). The use of these products is increasing rapidly around the world and presents a paradigm shift in the way in which dental impressions are made. Several of the leading 3D dental digital scanning systems are presented and discussed in this article.

In vitro investigation of the integration depth of oral fluids and disinfectants into alginate impressions.

Science.gov (United States)

Surna, Rimas; Junevicius, Jonas; Rutkauskas, Evaldas

2009-01-01

The objective of this work is to prove that oral cavity fluids diffuse into alginate mass of impressions. In addition, the information is presented on the subject that disinfectants used for alginate impressions disinfection not only diffuse into alginate mass but penetrate deeper than oral cavity fluids. Three examination groups were formed for the research, the results of which evidenced how deeply oral cavity fluids and disinfectants 'Alpha Guard GF' and 'Orbis' could possibly diffuse into alginate impression material 'Kromopan 100'. In the first examination group ten impressions from the upper jaw dental arch and mucosa were taken, firstly colouring oral cavity fluids with a special colouring tablet MIRA-2-TON (Hager Werken). Cuts were randomly selected from impressions and scanned aiming to establish the depth of the coloured oral cavity fluid penetration. In the second and the third examination groups taken alginate impressions were accordingly soaked in 'Alpha Guard GF' and 'Orbis' with pigment and later randomly selected cuts were scanned in the same manner as in the first research group. RESULTS. The research results establish that coloured dental cavity fluids maximum diffuse into alginate impression is up to 540 microm with the presence of 95% of discolouring while disinfectants 'Alpha Guard GF' and 'Orbis' accordingly diffuse into alginate mass up to 710 microm and 870 microm with the presence of 95% of discolouring. CONCLUSIONS. The results obtained show that disinfectants using them according to the recommendations of a manufacturer, diffuse into alginate mass deeper than oral cavity fluids at the time of impressions taking.

Interpersonal Teaching Style and Student Impression Formation

Science.gov (United States)

Coldren, Jeffrey; Hively, Jodi

2009-01-01

Assuming that learning is an inherently social process, this research explores interpersonal variables that affect teaching. Specifically, does the interpersonal teaching style affect student impressions of the instructor? Eighty-five undergraduates viewed one of three ten-minute videos that portrayed either an authoritarian, authoritative, or…

Pipelines cathodic protection design methodologies for impressed ...

African Journals Online (AJOL)

Several inadequate designs of cathodically polarized offshore and onshore pipelines have been reported in Nigeria owing to design complexity and application of the cathodic protection system. The present study focused on critical and detailed approach in impressed current and sacrificial anode design calculation ...

Two- and three-dimensional accuracy of dental impression materials: effects of storage time and moisture contamination.

Science.gov (United States)

Chandran, Deepa T; Jagger, Daryll C; Jagger, Robert G; Barbour, Michele E

2010-01-01

Dental impression materials are used to create an inverse replica of the dental hard and soft tissues, and are used in processes such as the fabrication of crowns and bridges. The accuracy and dimensional stability of impression materials are of paramount importance to the accuracy of fit of the resultant prosthesis. Conventional methods for assessing the dimensional stability of impression materials are two-dimensional (2D), and assess shrinkage or expansion between selected fixed points on the impression. In this study, dimensional changes in four impression materials were assessed using an established 2D and an experimental three-dimensional (3D) technique. The former involved measurement of the distance between reference points on the impression; the latter a contact scanning method for producing a computer map of the impression surface showing localised expansion, contraction and warpage. Dimensional changes were assessed as a function of storage times and moisture contamination comparable to that found in clinical situations. It was evident that dimensional changes observed using the 3D technique were not always apparent using the 2D technique, and that the former offers certain advantages in terms of assessing dimensional accuracy and predictability of impression methods. There are, however, drawbacks associated with 3D techniques such as the more time-consuming nature of the data acquisition and difficulty in statistically analysing the data.

Marginal and Internal Fit of Cobalt-Chromium Fixed Dental Prostheses Generated from Digital and Conventional Impressions

Directory of Open Access Journals (Sweden)

Per Svanborg

2014-01-01

Full Text Available Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produced using vinyl polysiloxane (VPS impression material. A triple-scan protocol and CAD software were used for measuring and calculating discrepancies of the FDPs at 3 standard areas: mean internal discrepancy, absolute marginal gap, and cervical area discrepancy. The Mann-Whitney U test was used for analyzing the results. Results. For conventional and digital impressions, respectively, FDPs had an absolute marginal gap of 147 μm and 142 μm, cervical area discrepancy of 69 μm and 44 μm, and mean internal discrepancy of 117 μm and 93 μm. The differences were statistically significant in the cervical and internal areas (P<0.001. Significance. The results indicated that the digital impression technique is more exact and can generate 3-unit FDPs with a significantly closer fit compared to the VPS technique.

Comparison of dimensional accuracy of digital dental models produced from scanned impressions and scanned stone casts

Science.gov (United States)

Subeihi, Haitham

Introduction: Digital models of dental arches play a more and more important role in dentistry. A digital dental model can be generated by directly scanning intraoral structures, by scanning a conventional impression of oral structures or by scanning a stone cast poured from the conventional impression. An accurate digital scan model is a fundamental part for the fabrication of dental restorations. Aims: 1. To compare the dimensional accuracy of digital dental models produced by scanning of impressions versus scanning of stone casts. 2. To compare the dimensional accuracy of digital dental models produced by scanning of impressions made of three different materials (polyvinyl siloxane, polyether or vinyl polyether silicone). Methods and Materials: This laboratory study included taking addition silicone, polyether and vinyl polyether silicone impressions from an epoxy reference model that was created from an original typodont. Teeth number 28 and 30 on the typodont with a missing tooth number 29 were prepared for a metal-ceramic three-unit fixed dental prosthesis with tooth #29 being a pontic. After tooth preparation, an epoxy resin reference model was fabricated by duplicating the typodont quadrant that included the tooth preparations. From this reference model 12 polyvinyl siloxane impressions, 12 polyether impressions and 12 vinyl polyether silicone impressions were made. All 36 impressions were scanned before pouring them with dental stone. The 36 dental stone casts were, in turn, scanned to produce digital models. A reference digital model was made by scanning the reference model. Six groups of digital models were produced. Three groups were made by scanning of the impressions obtained with the three different materials, the other three groups involved the scanning of the dental casts that resulted from pouring the impressions made with the three different materials. Groups of digital models were compared using Root Mean Squares (RMS) in terms of their

Evaluation of accuracy of multiple dental implant impressions using various splinting materials.

Science.gov (United States)

Hariharan, Rasasubramanian; Shankar, Chitra; Rajan, Manoj; Baig, Mirza Rustum; Azhagarasan, N S

2010-01-01

The aim of the present study was to compare the accuracy of casts obtained from nonsplinted and splinted direct impression techniques employing various splinting materials for multiple dental implants. A reference model with four Nobel Replace Select implant replicas in the anterior mandible was fabricated with denture base heat-curing acrylic resin. Impressions of the reference model were made using polyether impression material by direct nonsplinted and splinted techniques. Impressions were divided into four groups: group A: nonsplinted technique; group B: acrylic resin-splinted technique; group C: bite registration addition silicone-splinted technique; and group D: bite registration polyether-splinted technique. Four impressions were made for each group and casts were poured in type IV dental stone. Linear differences in interimplant distances in the x-, y-, and z-axes and differences in interimplant angulations in the z-axis were measured on the casts using a coordinate measuring machine. The interimplant distance D1y showed significant variations in all four test groups (P = .043), while D3x values varied significantly between the acrylic resin-splinted and silicone-splinted groups. Casts obtained from the polyether-splinted group were the closest to the reference model in the x- and y-axes. In the z-axis, D2z values varied significantly among the three test groups (P = .009). Casts from the acrylic resin-splinted group were the closest to the reference model in the z-axis. Also, one of the three angles measured (angle 2) showed significant differences within three test groups (P = .009). Casts from the nonsplinted group exhibited the smallest angular differences. Casts obtained from all four impression techniques exhibited differences from the reference model. Casts obtained using the bite registration polyether-splinted technique were the most accurate versus the reference model, followed by those obtained via the acrylic resin-splinted, nonsplinted, and

Making an Impression: Portfolios as Instruments of Impression Management for Teachers in Early Childhood Education and Care Centres

Science.gov (United States)

Knauf, Helen

2017-01-01

The study presented here examines the contribution of portfolios to the communication between parents and early childhood education and care centres. Using content analysis techniques, 2104 portfolio entries are examined with a view to establishing what impression they are intended to create. While the actual purpose of portfolios emphasizes the…

An analysis of the persistent presence of opportunistic pathogens on patient-derived dental impressions and gypsum casts.

Science.gov (United States)

Egusa, Hiroshi; Watamoto, Takao; Abe, Keike; Kobayashi, Munemasa; Kaneda, Yoshitoshi; Ashida, Shunji; Matsumoto, Takuya; Yatani, Hirofumi

2008-01-01

This study aimed to assess the persistent presence of microorganisms on patient-derived dental impressions and gypsum casts, while highlighting important human pathogens such as Candida, methicillin-resistant Staphylococcus aureus (MRSA), and Pseudomonas aeruginosa. The practices and opinions regarding cross-infection control from 59 general dentists in Japan were obtained via a questionnaire. Alginate impressions were made from 56 patients. Using a brain heart infusion agar medium, impression and imprint cultures were carried out to visualize the microbial contamination on the surfaces of the impressions and gypsum casts, respectively. The colonies on the surfaces of the 30 impression cultures and 26 imprint cultures were collected by swabbing and then inoculated onto selective agar plates to detect streptococci, staphylococci, Candida, MRSA, and P aeruginosa. The questionnaire showed that only 54% of general dentists had a cross-infection policy in their dental clinics, and only 30% to 40% were aware of the possible persistence of MRSA or P aeruginosa on impressions and gypsum casts. The impression/imprint cultures grew a large number of visible bacterial colonies on all of impression/gypsum cast samples investigated. Selective agar cultures demonstrated the presence of streptococci (100, 100%), staphylococci (56.7, 65.4%), Candida (30, 46.2%), MRSA (26.7, 15.4%), and P aeruginosa (6.7, 7.7%) on the impressions and the gypsum casts, respectively. This investigation showed that patient-derived dental impressions and gypsum casts are contaminated with numerous microbes, including Candida, MRSA, and P aeruginosa, which are known pathogens responsible for nosocomial and/or life-threatening infection in the immunocompromised host.

Looks and linguistics: Impression formation in online exchange marketplaces.

Science.gov (United States)

Ciuchta, Michael P; O'Toole, Jay

2016-01-01

This study advances theories of impression formation by focusing on two factors that generate emotional responses: physical attractiveness and positive word use. Although considerable research on impression formation exists, most studies consider factors in isolation and neglect possible interactions. Our theory introduces competing mechanisms regarding possible interaction effects, and we empirically test them in an online marketplace. Results from the analysis of 729 loan requests from a leading online peer-to-peer lending market suggest that physical attractiveness and positive word use work together to influence the likelihood of acquiring resources and establish an important boundary condition to the general "beauty is good" effect.

Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision

OpenAIRE

Ender, Andreas; Mehl, Albert

2013-01-01

STATEMENT OF PROBLEM: A new approach to both 3-dimensional (3D) trueness and precision is necessary to assess the accuracy of intraoral digital impressions and compare them to conventionally acquired impressions. PURPOSE: The purpose of this in vitro study was to evaluate whether a new reference scanner is capable of measuring conventional and digital intraoral complete-arch impressions for 3D accuracy. MATERIAL AND METHODS: A steel reference dentate model was fabricated and measured with a...

Global Connections for Lasting Impressions: Experiential Learning about TCP

Science.gov (United States)

Allison, Colin; Miller, Alan; Oliver, Iain; Sturgeon, Thomas

“Tell me and I forget, Show me and I remember, Involve me and I understand”. This paper discusses the motivation for, and design of, a learning resource which allows students to explore the Transmission Control Protocol (TCP). TCP is responsible for transporting over 80% of the traffic on the Internet - all web and e-mail for example - and in addition is the primary means of achieving Internet congestion control. TCP is therefore core to modern life. It is a protocol under constant study with a view to evolution, and it is incumbent on all ICT curricula to provide education at appropriate levels about its dynamics, strengths and weaknesses. There are no shortages of good textbooks which provide information on TCP, but these are no substitute for experiential learning in order to provide a lasting understanding. The TCP Live learning resource allows students to explore the behavior of TCP on the global Internet, and see the wide variety of conditions that the protocol has to cope with, thereby extending their viewpoint outwith the limited scope of their own institutional firewalls.

From alginate impressions to digital virtual models: accuracy and reproducibility.

Science.gov (United States)

Dalstra, Michel; Melsen, Birte

2009-03-01

To compare the accuracy and reproducibility of measurements performed on digital virtual models with those taken on plaster casts from models poured immediately after the impression was taken, the 'gold standard', and from plaster models poured following a 3-5 day shipping procedure of the alginate impression. Direct comparison of two measuring techniques. The study was conducted at the Department of Orthodontics, School of Dentistry, University of Aarhus, Denmark in 2006/2007. Twelve randomly selected orthodontic graduate students with informed consent. Three sets of alginate impressions were taken from the participants within 1 hour. Plaster models were poured immediately from two of the sets, while the third set was kept in transit in the mail for 3-5 days. Upon return a plaster model was poured as well. Finally digital models were made from the plaster models. A number of measurements were performed on the plaster casts with a digital calliper and on the corresponding digital models using the virtual measuring tool of the accompanying software. Afterwards these measurements were compared statistically. No statistical differences were found between the three sets of plaster models. The intra- and inter-observer variability are smaller for the measurements performed on the digital models. Sending alginate impressions by mail does not affect the quality and accuracy of plaster casts poured from them afterwards. Virtual measurements performed on digital models display less variability than the corresponding measurements performed with a calliper on the actual models.

Direct impression on agar surface as a diagnostic sampling procedure for candida balanitis.

Science.gov (United States)

Lisboa, Carmen; Santos, António; Azevedo, Filomena; Pina-Vaz, Cidália; Rodrigues, Acácio Gonçalves

2010-02-01

The diagnosis of candida balanitis should be based upon both clinical and mycological data. The procedure of material collection is a critical issue to confirm or rule out the clinical diagnosis of candida balanitis. To compare direct impression of the glans on the agar surface of solid culture media with the collection of genital exudates with cotton swab for the diagnosis of candida balanitis. A prospective cross-sectional study was carried out during a 36-month period. Sexually transmitted disease clinic attendees with balanitis and asymptomatic men were included. Specimens for yeast culture were collected from the glans penis and inner preputial layer using the direct impression on CHROMagar candida medium and by swabbing with a sterile cotton swab. Among 478 men enrolled, 189 had balanitis. The prevalence of candida balanitis was 17.8% (85/478) confirmed after culture by direct impression; the swab method detected only 54/85 (63.5%) of these men. Of the 289 asymptomatic men, 36 (12.5%) yielded Candida spp; the swab method detected only 38.9% of these men. The risk of having candida balanitis is 8.9 (IC 95% 2.48 to 32.04) whenever the number of candida colonies recovered by direct impression was greater than 10. Direct impression on CHROMagar candida medium resulted in the highest Candida spp recovery rate. More than 10 colonies yielded by impression culture were statistically associated with candida balanitis. This method shows the ideal profile for sampling the male genital area for yeasts and should be included in the management of balanitis.

Effects of Impression Material, Impression Tray Type, and Type of Partial Edentulism on the Fit of Cobalt-Chromium Partial Denture Frameworks on Initial Clinical Insertion: A Retrospective Clinical Evaluation.

Science.gov (United States)

Baig, Mirza Rustum; Akbar, Jaber Hussain; Qudeimat, Muawia; Omar, Ridwaan

2018-02-15

To evaluate the effects of impression material, impression tray type, and type of partial edentulism (ie, Kennedy class) on the accuracy of fit of cobalt-chromium (Co-Cr) partial removable dental prostheses (PRDP) in terms of the number of fabricated frameworks required until the attainment of adequate fit. Electronic case documentations of 120 partially edentulous patients provided with Co-Cr PRDP treatment for one or both arches were examined. Statistical analyses of data were performed using analysis of variance and Tukey honest significant difference test to compare the relationships between the different factors and the number of frameworks that needed to be fabricated for each patient (α = .05). Statistical analysis of data derived from 143 records (69 maxillary and 74 mandibular) revealed no significant correlation between impression material, tray type, or Kennedy class and the number of construction attempts for the pooled or individual arch data (P ≥ .05). In PRDP treatment, alginate can be chosen as a first-choice material, and metal stock trays can be a preferred option for making final impressions to fabricate Co-Cr frameworks.

The IMPRESS DDT: a database design toolbox based on a formal specification language

NARCIS (Netherlands)

Flokstra, Jan; van Keulen, Maurice; Skowronek, Jacek; Skowronek, J.

The Database Design Tool prototype is being developed in the IMPRESS project (Esprit project 6355). The IMPRESS project started in May 1992 and aims at creating a low-level storage manager tailored for multimedia applications, together with a library of efficient operators, a programming

[Study of the appearance difference of lower complete denture between functional and anatomic impression techniques].

Science.gov (United States)

Zhong, Qun; Wu, Xue-yin; Shen, Qing-yi; Shen, Qing-ping

2012-04-01

To compare the difference in oblique external ridge, oblique internal ridge and alveolar process crest of lower complete denture base made through functional impression and anatomic impression techniques. Fifteen patients were chosen to treat with two kinds of complete dentures through functional impression and anatomic impression technique respectively. 3D laser scanner was used to scan the three-dimensional model of the denture base and the differences of the surface structural between two techniques in alveolar process crest, external and internal oblique ridges were analyzed, using paired t test with SPSS 12.0 software package. Between the two techniques, there were significant differences in the areas of internal and external oblique ridge(P0.05). The results explain why there is less tenderness when functional impression technique is applied. The differences measured also indicate that sufficient buffering should be made in external and internal oblique ridge areas in clinic.

Impression management e o desempenho organizacional: o caso português

OpenAIRE

Borges, Maria de Fátima Ribeiro

2011-01-01

O estudo pretende avaliar o impacte do desempenho organizacional na adopção de estratégias de impression management. O estudo apresenta uma análise de conteúdo de 45 cartas do Presidente do Conselho de Administração, contidas nos relatórios e contas anuais de 2010, das empresas Portuguesas não financeiras. Os resultados indicam que o desempenho organizacional não influencia a adoção de estratégias de impression management. Consistente com a teoria psicológica social de im...

In Vitro Implant Impression Accuracy Using a New Photopolymerizing SDR Splinting Material.

Science.gov (United States)

Di Fiore, Adolfo; Meneghello, Roberto; Savio, Gianpaolo; Sivolella, Stefano; Katsoulis, Joannis; Stellini, Edoardo

2015-10-01

The study aims to evaluate three-dimensionally (3D) the accuracy of implant impressions using a new resin splinting material, "Smart Dentin Replacement" (SDR). A titanium model of an edentulous mandible with six implant analogues was used as a master model and its dimensions measured with a coordinate measuring machine. Before the total 60 impressions were taken (open tray, screw-retained abutments, vinyl polysiloxane), they were divided in four groups: A (test): copings pick-up splinted with dental floss and fotopolymerizing SDR; B (test): see A, additionally sectioned and splinted again with SDR; C (control): copings pick-up splinted with dental floss and autopolymerizing Duralay® (Reliance Dental Mfg. Co., Alsip, IL, USA) acrylic resin; and D (control): see C, additionally sectioned and splinted again with Duralay. The impressions were measured directly with an optomechanical coordinate measuring machine and analyzed with a computer-aided design (CAD) geometric modeling software. The Wilcoxon matched-pair signed-rank test was used to compare groups. While there was no difference (p = .430) between the mean 3D deviations of the test groups A (17.5 μm) and B (17.4 μm), they both showed statistically significant differences (p impression techniques for edentulous jaws with multiple implants are highly accurate using the new fotopolymerizing splinting material SDR. Sectioning and rejoining of the SDR splinting had no impact on the impression accuracy. © 2015 Wiley Periodicals, Inc.

The Cognitive Assessment Interview (CAI): development and validation of an empirically derived, brief interview-based measure of cognition.

Science.gov (United States)

Ventura, Joseph; Reise, Steven P; Keefe, Richard S E; Baade, Lyle E; Gold, James M; Green, Michael F; Kern, Robert S; Mesholam-Gately, Raquelle; Nuechterlein, Keith H; Seidman, Larry J; Bilder, Robert M

2010-08-01

Practical, reliable "real world" measures of cognition are needed to supplement neurocognitive performance data to evaluate possible efficacy of new drugs targeting cognitive deficits associated with schizophrenia. Because interview-based measures of cognition offer one possible approach, data from the MATRICS initiative (n=176) were used to examine the psychometric properties of the Schizophrenia Cognition Rating Scale (SCoRS) and the Clinical Global Impression of Cognition in Schizophrenia (CGI-CogS). We used classical test theory methods and item response theory to derive the 10-item Cognitive Assessment Interview (CAI) from the SCoRS and CGI-CogS ("parent instruments"). Sources of information for CAI ratings included the patient and an informant. Validity analyses examined the relationship between the CAI and objective measures of cognitive functioning, intermediate measures of cognition, and functional outcome. The rater's score from the newly derived CAI (10 items) correlate highly (r=.87) with those from the combined set of the SCoRS and CGI-CogS (41 items). Both the patient (r=.82) and the informant (r=.95) data were highly correlated with the rater's score. The CAI was modestly correlated with objectively measured neurocognition (r=-.32), functional capacity (r=-.44), and functional outcome (r=-.32), which was comparable to the parent instruments. The CAI allows for expert judgment in evaluating a patient's cognitive functioning and was modestly correlated with neurocognitive functioning, functional capacity, and functional outcome. The CAI is a brief, repeatable, and potentially valuable tool for rating cognition in schizophrenia patients who are participating in clinical trials. Copyright 2010 Elsevier B.V. All rights reserved.

Prescribing Patterns in a Psychiatrically Referred Sample of Youth With Autism Spectrum Disorder.

Science.gov (United States)

Shekunov, Julia; Wozniak, Janet; Conroy, Kristina; Pinsky, Elizabeth; Fitzgerald, Maura; de Leon, Melissa F; Belser, Abigail; Biederman, Joseph; Joshi, Gagan

The aim of this study was to examine the pattern of psychopharmacologic interventions in a psychiatrically referred sample of youth with autism spectrum disorder (ASD). This retrospective chart review aimed at collecting demographic and clinical information, including data on DSM-IV-TR criteria-based psychiatric disorders and related current medication treatment and response. Data were collected in December 2011. Clinicians identified the target disorder for each medication and any adverse events. Level of psychopathology and therapeutic response was assessed by the clinician-rated Clinical Global Impressions scale (CGI). Psychiatrically referred youth with ASD (n = 54) suffered from multiple psychopathologies (mean = 2.3) and had a marked level of morbidity (range of baseline CGI-Severity of Illness mean scores, 4.3-5.6). The most prevalent psychopathology was ADHD (83%), anxiety disorders (67%), bipolar spectrum disorder (43%), and mood disorder not otherwise specified (44%). The majority (80%) of the subjects received combination therapy (mean ± SD number of psychotropic medications = 3 ± 1.5). Forty percent of the participants responded on all treatment target symptoms (CGI-Improvement scale score ≤ 2), and an additional 10% experienced response versus nonresponse on a relatively greater number of target symptoms. Half of the subjects reported an adverse event, most commonly weight gain (28%) and sedation (12%), both from antipsychotic medication use. Psychiatrically referred youth with ASD suffer from multiple highly impairing psychiatric disorders that require combination pharmacotherapy. These findings highlight the need for further research to guide clinical decision-making and treatment. © Copyright 2017 Physicians Postgraduate Press, Inc.

Determination of minimal clinically important change in early and advanced Parkinson's disease.

Science.gov (United States)

Hauser, Robert A; Auinger, Peggy

2011-04-01

Two common primary efficacy outcome measures in Parkinson's disease (PD) are change in Unified Parkinson's Disease Rating Scale (UPDRS) scores in early PD and change in "off" time in patients with motor fluctuations. Defining the minimal clinically important change (MCIC) in these outcome measures is important to interpret the clinical relevance of changes observed in clinical trials and other situations. We analyzed data from 2 multicenter, placebo-controlled, randomized clinical trials of rasagiline; TEMPO studied 404 early PD subjects, and PRESTO studied 472 levodopa-treated subjects with motor fluctuations. An anchor-based approach using clinical global impression of improvement (CGI-I) was used to determine MCIC for UPDRS scores and daily "off" time. MCIC was defined as mean change in actively treated subjects rated minimally improved on CGI-I. Receiver operating characteristic (ROC) curves defined optimal cutoffs discriminating between changed and unchanged subjects. MCIC for improvement in total UPDRS score (parts I-III) in early PD was determined to be -3.5 points based on mean scores and -3.0 points based on ROC curves. In addition, we found an MCIC for reduction in "off" time of 1.0 hours as defined by mean reduction in "off" time in active treated subjects self-rated as minimally improved on CGI-I minus mean reduction in "off" time in placebo-treated subjects self-rated as unchanged (1.9-0.9 hours). We hypothesize that many methodological factors can influence determination of the MCIC, and a range of values is likely to emerge from multiple studies. Copyright © 2011 Movement Disorder Society.

Cost-effectiveness of silicone and alginate impressions for complete dentures.

Science.gov (United States)

Hulme, C; Yu, G; Browne, C; O'Dwyer, J; Craddock, H; Brown, S; Gray, J; Pavitt, S; Fernandez, C; Godfrey, M; Dukanovic, G; Brunton, P; Hyde, T P

2014-08-01

The aim of this study was to assess the cost effectiveness of silicone and alginate impressions for complete dentures. Cost effectiveness analyses were undertaken alongside a UK single centre, double blind, controlled, crossover clinical trial. Taking the perspective of the healthcare sector, effectiveness is measured using the EuroQol (EQ-5D-3L) which provides a single index value for health status that may be combined with time to produce quality adjusted life years (QALYs); and Oral Health Impact Profile (OHIP-EDENT). Incremental cost effectiveness ratios are presented representing the additional cost per one unit gained. Mean cost was higher in the silicone impression group (£388.57 vs. £363.18). Negligible between-group differences were observed in QALY gains; the silicone group had greater mean OHIP-EDENT gains. The additional cost using silicone was £3.41 per change of one point in the OHIP-EDENT. The silicone group was more costly, driven by the cost of materials. Changes in the EQ-5D and QALY gains over time and between arms were not statistically significant. Change in OHIP-EDENT score showed greater improvement in the silicone group and the difference between arms was statistically significant. Given negligible QALY gains and low level of resource use, results must be treated with caution. It is difficult to make robust claims about the comparative cost-effectiveness. Silicone impressions for complete dentures improve patients' quality of life (OHIP-EDENT score). The extra cost of silicone impressions is £30 per patient. Dentists, patients and health care funders need to consider the clinical and financial value of silicone impressions. Different patients, different dentists, different health funders will have individual perceptions and judgements. ISRCTN01528038. NIHR-RfPB grant PB-PG-0408-16300. This article forms part of a project for which the author (TPH) won the Senior Clinical Unilever Hatton Award of the International Assocation for Dental

Treatment comfort, time perception, and preference for conventional and digital impression techniques: A comparative study in young patients.

Science.gov (United States)

Burhardt, Lukasz; Livas, Christos; Kerdijk, Wouter; van der Meer, Wicher Joerd; Ren, Yijin

2016-08-01

The aim of this crossover study was to assess perceptions and preferences for impression techniques in young orthodontic patients receiving alginate and 2 different digital impressions. Thirty-eight subjects aged 10 to 17 years requiring impressions for orthodontic treatment were randomly allocated to 3 groups that differed in the order that an alginate impressions and 2 different intraoral scanning procedures were administered. After each procedure, the patients were asked to score their perceptions on a 5-point Likert scale for gag reflex, queasiness, difficulty to breathe, uncomfortable feeling, perception of the scanning time, state of anxiety, and use of a powder, and to select the preferred impression system. Chairside time and maximal mouth opening were also registered. More queasiness (P = 0.00) and discomfort (P = 0.02) during alginate impression taking of the maxilla were perceived compared with the scans with the CEREC Omnicam (Sirona Dental Systems, Bensheim, Germany). There were no significant differences in perceptions between the alginate impressions and the Lava C.O.S. (3M ESPE, St Paul, Minn) and between the 2 scanners. Chairside times for the alginate impressions (9.7 ± 1.8 minutes) and the CEREC Omnicam (10.7 ± 1.8 minutes) were significantly lower (P <0.001) than for the Lava C.O.S. (17.8 ± 4.0 minutes). Digital impressions were favored by 51% of the subjects, whereas 29% chose alginate impressions, and 20% had no preference. Regardless of the significant differences in the registered times among the 3 impression-taking methods, the distributions of the Likert scores of time perception and maximal mouth opening were similar in all 3 groups. Young orthodontic patients preferred the digital impression techniques over the alginate method, although alginate impressions required the shortest chairside time. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

A comparison of enhancement techniques for footwear impressions on dark and patterned fabrics.

Science.gov (United States)

Farrugia, Kevin J; Bandey, Helen; Dawson, Lorna; Daéid, Niamh Nic

2013-11-01

The use of chemical enhancement techniques on porous substrates, such as fabrics, poses several challenges predominantly due to the occurrence of background staining and diffusion as well as visualization difficulties. A range of readily available chemical and lighting techniques were utilized to enhance footwear impressions made in blood, soil, and urine on dark and patterned fabrics. Footwear impressions were all prepared at a set force using a specifically built footwear rig. In most cases, results demonstrated that fluorescent chemical techniques were required for visualization as nonfluorescent techniques provided little or no contrast with the background. Occasionally, this contrast was improved by oblique lighting. Successful results were obtained for the enhancement of footwear impressions in blood; however, the enhancement of footwear impressions in urine and soil on dark and patterned fabrics was much more limited. The results demonstrate that visualization and fluorescent enhancement on porous substrates such as fabrics is possible. © 2013 American Academy of Forensic Sciences.

Impression management and achievement motivation: Investigating substantive links

NARCIS (Netherlands)

Elliot, A.J.; Aldhobaiban, N.; Murayama, K.; Kobeisy, A.; Gocłowska, M.A.; Khyat, A.

In this research, we investigate impression management (IM) as a substantive personality variable by linking it to differentiated achievement motivation constructs, namely achievement motives (workmastery, competitiveness, fear of failure) and achievement goals (mastery-approach, mastery-avoidance,

The Use of Digital Impressions to Fabricate Tooth-Supported Partial Removable Dental Prostheses: A Clinical Report.

Science.gov (United States)

Mansour, Mohamed; Sanchez, Eliana; Machado, Camilo

2016-08-01

Impression making is a critical step in the fabrication of a partial removable dental prosthesis (RDP). A technique is described for making final impressions to fabricate partial RDPs for Kennedy class III patients using a computer-aided design and computer-assisted manufacturing digital impression system. © 2015 by the American College of Prosthodontists.

Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes

OpenAIRE

Yuzbasioglu, Emir; Kurt, Hanefi; Turunc, Rana; Bilir, Halenur

2014-01-01

Background The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Methods Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite reg...

Cross-cultural adaptation of the Schizophrenia Caregiver Questionnaire (SCQ) and the Caregiver Global Impression (CaGI) Scales in 11 languages.

Science.gov (United States)

Rofail, Diana; Acquadro, Catherine; Izquierdo, Cécile; Regnault, Antoine; Zarit, Steven H

2015-06-09

The Schizophrenia Caregiver Questionnaire (SCQ) was developed to provide a comprehensive view of caregivers' subjective experiences of the impacts of caring for someone with schizophrenia. The Caregiver Global Impression (CaGI) scales were designed to assess their perception of the severity of the schizophrenia symptoms, of change in schizophrenia symptoms and in the experience of caring since the beginning of the study. The objectives of the study were to translate the SCQ and CaGI scales in 11 languages [French (Canada, France), English (Canada, UK, Australia), German (Germany), Italian (Italy), Spanish (Spain), Dutch (the Netherlands), Finnish (Finland), and Swedish (Sweden)], to present evidence that the translations capture the concepts of the original questionnaires and are well understood by caregivers of patients with schizophrenia in each target country. The different language versions were developed using a standard or adjusted linguistic validation process fully complying with the International Society for Pharmacoeconomics and Outcomes Research (ISPOR) recommended procedures. Interviews were conducted with 55 caregivers of patients with schizophrenia from 10 countries representing the 11 different languages. Participants ranged in age from 28 to 84 years and had 5 to 16 years of education. Women represented 69.1 % (38/55) of the sample. Fourteen out of the 32 items of the SCQ generated difficulties which were mostly of semantic origin (13 items). The translation of the CaGI scales did not raise any major difficulty. Only five out of the 55 caregivers had difficulty understanding the meaning of the translations of "degree" in the expressions "degree of change in experience of caring" and "degree of change in symptoms". Translations of the SCQ and CaGI scales into 11 languages adequately captured the concepts in the original English versions of the questionnaires, thereby demonstrating the conceptual, semantic, and cultural equivalence of each translation.

Quantifying the impact cosmetic make-up has on age perception and the first impression projected.

Science.gov (United States)

Dayan, Steven H; Cho, Katherine; Siracusa, Mary; Gutierrez-Borst, Selika

2015-04-01

First impressions are lasting, consequential and defined as the immediate judgment made of another from zero acquaintance. Multiple studies have reported the benefits of cosmetic make-up. We set out to investigate the psychosocial and aesthetic effects of cosmetic make-up in order to better understand why women wear it. Twenty-seven women were recruited in order to examine the effects of cosmetic make-up on first impressions. The photographs of individual subjects wearing the control cosmetics, their own make-up, and no make-up were randomly assigned to three binders (A, B, and C). Three hundred evaluators participated (100 evaluators per book) and completed a 10-point First Impression Scale for each of the 27 photos in their binder. Statistical analysis of the collected data was conducted in SPSS using two-tailed t-tests to determine the statistical significance of the differences between first impressions of Own Make-up vs No Make-up, No Make-up vs Control Make-up, and Own Makeup vs Control Make-up. There was a significant difference in improvement in all pairings across all 8 categories in the First Impressions questionnaire particularly in perceived age between own make-up, no make-up, control make-up (41, 42, 38; Pfirst impressions, age perception, self-esteem, and the quality of life impact that cosmetic makeup has on women's appearance and confidence. Subjects wearing cosmetic make-up appeared 4 years younger than those wearing no make-up. And the control cosmetic make-up subjects on average projected a 37% better first impression than subjects wearing no make-up. We objectively quantified and qualified the benefits of applying cosmetic make-up. Make-up can reduce the perceived age, improve the first impression projected and increase the self-esteem of those who apply it.

Stigmatizing materialism: on stereotypes and impressions of materialistic and experiential pursuits.

Science.gov (United States)

Van Boven, Leaf; Campbell, Margaret C; Gilovich, Thomas

2010-04-01

Five studies examined the stigmatization of materialism. Participants expressed negative stereotypes of materialistic people, considering them to be more selfish and self-centered than experiential people (Study 1). Participants also viewed materialistic pursuits as more extrinsically motivated than experiential pursuits (Study 2). These stereotypes led respondents from varied demographic backgrounds to form less favorable impressions of individuals who were associated with prototypically materialistic versus experiential purchases, a result that was statistically mediated by impressions that materialistic purchases were more extrinsically motivated (Study 3). These differential impressions are primarily attributable to the denigration of materialistic people rather than the admiration of experiential people (Study 4). The stigmatization of materialism led participants to like less and enjoy interacting less with their conversation partners when discussing materialistic rather than experiential purchases (Study 5). The authors discuss these findings' implications for self-perception, accurate social perception, and well-being.

Hyperbaric treatment for children with autism: a multicenter, randomized, double-blind, controlled trial

Directory of Open Access Journals (Sweden)

Usman Anju

2009-03-01

Full Text Available Abstract Background Several uncontrolled studies of hyperbaric treatment in children with autism have reported clinical improvements; however, this treatment has not been evaluated to date with a controlled study. We performed a multicenter, randomized, double-blind, controlled trial to assess the efficacy of hyperbaric treatment in children with autism. Methods 62 children with autism recruited from 6 centers, ages 2–7 years (mean 4.92 ± 1.21, were randomly assigned to 40 hourly treatments of either hyperbaric treatment at 1.3 atmosphere (atm and 24% oxygen ("treatment group", n = 33 or slightly pressurized room air at 1.03 atm and 21% oxygen ("control group", n = 29. Outcome measures included Clinical Global Impression (CGI scale, Aberrant Behavior Checklist (ABC, and Autism Treatment Evaluation Checklist (ATEC. Results After 40 sessions, mean physician CGI scores significantly improved in the treatment group compared to controls in overall functioning (p = 0.0008, receptive language (p Conclusion Children with autism who received hyperbaric treatment at 1.3 atm and 24% oxygen for 40 hourly sessions had significant improvements in overall functioning, receptive language, social interaction, eye contact, and sensory/cognitive awareness compared to children who received slightly pressurized room air. Trial Registration clinicaltrials.gov NCT00335790

Selective mutism: a home-and kindergarten-based intervention for children 3-5 years: a pilot study.

Science.gov (United States)

Oerbeck, Beate; Johansen, Jorunn; Lundahl, Kathe; Kristensen, Hanne

2012-07-01

The aim was to examine the outcome of a multimodal treatment for selective mutism (SM). Seven children, aged three-five years, who were referred for SM were included. The treatment started at home and was continued at kindergarten for a maximum of six months, with predefined treatment goals in terms of speaking levels, from I ("Speaks to the therapist in a separate room with a parent present") through to VI ("Speaks in all kindergarten settings without the therapist present"). The outcome measures were the teacher-reported School Speech Questionnaire (SSQ) and the treatment goal obtained (I-VI) six months after the onset of treatment, and the SSQ and Clinical Global Impression Scale (CGI) at one-year follow-up. Six children spoke in all kindergarten settings (VI) after a mean of 14 weeks treatment. One child, with more extensive neuro-developmental delay, spoke in some settings only (V). The mean SSQ score was 0.59 (SD = 0.51) at baseline compared with 2.68 (SD = 0.35) at the six-month evaluation and 2.26 (SD = 0.93) at one-year follow-up. The mean CGI score at baseline was 4.43 (SD = 0.79) compared with 1.14 (SD = 0.38) at follow-up. Home- and kindergarten-based treatment appears to be promising.

Efficacy of Hippotherapy Versus Pharmacotherapy in Attention-Deficit/Hyperactivity Disorder: A Randomized Clinical Trial.

Science.gov (United States)

Oh, Yunhye; Joung, Yoo-Sook; Jang, Byongsu; Yoo, Jae Hyun; Song, Jihye; Kim, Jiwon; Kim, Kiho; Kim, Seonwoo; Lee, Jiyoung; Shin, Hye-Yeon; Kwon, Jeong-Yi; Kim, Yun-Hee; Jeong, Bumseok

2018-04-11

Pharmacotherapy among children with attention-deficit/hyperactivity disorder (ADHD) is effective, but many patients suffer from secondary psychiatric problems even after improvement of ADHD core symptoms. Hippotherapy have been used as adjunct treatment options for physical and psychosocial rehabilitation as well as to ameliorate core symptoms. The aim of this study was to investigate the effects of Hippotherapy versus pharmacotherapy for children with ADHD. Thirty-four participants with ADHD were randomly assigned at a 1:1 ratio to either 24 sessions of a twice-weekly hippotherapy or pharmacotherapy. To assess therapeutic effects, the ADHD Rating Scale (ARS) was used pretreatment and posttreatment as the primary outcome measure. Secondary outcomes included the Child Behavior Checklist (CBCL), Self-Esteem Scale (SES), Pediatric Quality of Life Inventory (PedsQL) child and parent report version, Developmental Coordination Disorder Questionnaire (DCDQ), Clinical Global Impressions-Severity (CGI-S), and quantitative electroencephalography. Both groups showed marked improvements in ADHD symptoms, CGI-S. No significant differences between groups were detected regarding treatment outcome except thought problem subscales of CBCL. Twelve weeks of hippotherapy improved attention, impulsivity/hyperactivity, and quality of life. This trial is promising, but further studies are required to evaluate the long-term clinical effectiveness of hippotherapy. The study is registered with ClinicalTrials.gov, number NCT 02482649.

A Comparative Study between Olanzapine and Risperidone in the Management of Schizophrenia

Directory of Open Access Journals (Sweden)

Saeed Shoja Shafti

2014-01-01

Full Text Available Introduction. Since a variety of comparisons between risperidone and olanzapine have resulted in diverse outcomes, so safety and efficacy of them were compared again in a new trial. Method. Sixty female schizophrenic patients entered into one of the assigned groups for random allocation to olanzapine or risperidone (n=30 in each group in a double-blind, 12-week clinical trial. Scale for Assessment of Positive Symptoms (SAPS and Scale for Assessment of Negative Symptoms (SANS were used as the primary outcome measures. Clinical Global Impressions-Severity Scale (CGI-S, Schedule for Assessment of Insight (SAI, and finally Simpson Angus Scale (SAS as well were employed as secondary scales. Results. While both of olanzapine and risperidone were significantly effective for improvement of positive symptoms (P<0.0001, as regards negative symptoms, it was so only by means of olanzapine (P<0.0003. CGI-S and SAI, as well, were significantly improved in both of the groups. SAS increment was significant only in the risperidone group (P<0.02. Conclusion. While both of olanzapine and risperidone were equally effective for improvement of positive symptoms and insight, olanzapine showed superior efficacy with respect to negative symptoms, along with lesser extrapyramidal side effects, in comparison with risperidone.

Direct mechanical data acquisition of dental impressions for the manufacturing of CAD/CAM restorations.

Science.gov (United States)

Quaas, Sebastian; Rudolph, Heike; Luthardt, Ralph G

2007-12-01

The basic prerequisite for the production of dental restorations by means of CAD/CAM technologies is the data acquisition (digitization). Currently, two methods are available, i.e. the extraoral digitization of master casts and the direct intraoral data acquisition. However, it seems to be beneficial to immediately digitize impressions directly at the dental office in order to combine the high precision of mechanical digitizing methods and to shorten the production process. The aim of this study was to investigate the measurement uncertainty (+/-2sigma) and the three-dimensional accuracy of the immediate tactile in-office digitization of dental impressions and of the mechanical digitizing of ceramic master dies using a high-precision touch-probe digitizer. The experimental set-up consisted of ceramic master dies representing tooth 13 and 36 as well as their identical virtual models (CAD models). Fifteen one-step putty-wash impressions were taken from each tooth. The impressions as well as the ceramic master dies were digitized applying a standardized procedure. The datasets were aligned to the corresponding CAD models; then, a computer-aided three-dimensional analysis was performed. The digitizing of the dental impressions showed a measurement uncertainty of 5.8, mean positive deviations between 27 and 28microm, and mean negative deviations between -21 and -31microm. The digitizing of the ceramic master dies showed a measurement uncertainty of 2.8, mean positive deviations between 7.7 and 9.1microm, and mean negative deviations between -8.5 and -8.8microm. Mechanical digitizers show a very low measurement uncertainty and a high precision. The immediate tactile in-office digitization of impressions cannot be recommended as adequate data acquisition method for CAD/CAM restorations. It is recommendable to digitize clinical sites extraorally, i.e. after taking an impression and fabricating a model cast thereof.

Digital versus analog complete-arch impressions for single-unit premolar implant crowns: Operating time and patient preference.

Science.gov (United States)

Schepke, Ulf; Meijer, Henny J A; Kerdijk, Wouter; Cune, Marco S

2015-09-01

Digital impression-making techniques are supposedly more patient friendly and less time-consuming than analog techniques, but evidence is lacking to substantiate this assumption. The purpose of this in vivo within-subject comparison study was to examine patient perception and time consumption for 2 complete-arch impression-making methods: a digital and an analog technique. Fifty participants with a single missing premolar were included. Treatment consisted of implant therapy. Three months after implant placement, complete-arch digital (Cerec Omnicam; Sirona) and analog impressions (semi-individual tray, Impregum; 3M ESPE) were made, and the participant's opinion was evaluated with a standard questionnaire addressing several domains (inconvenience, shortness of breath, fear of repeating the impression, and feelings of helplessness during the procedure) with the visual analog scale. All participants were asked which procedure they preferred. Operating time was measured with a stopwatch. The differences between impressions made for maxillary and mandibular implants were also compared. The data were analyzed with paired and independent sample t tests, and effect sizes were calculated. Statistically significant differences were found in favor of the digital procedure regarding all subjective domains (P<.001), with medium to large effect sizes. Of all the participants, over 80% preferred the digital procedure to the analog procedure. The mean duration of digital impression making was 6 minutes and 39 seconds (SD=1:51) versus 12 minutes and 13 seconds (SD=1:24) for the analog impression (P<.001, effect size=2.7). Digital impression making for the restoration of a single implant crown takes less time than analog impression making. Furthermore, participants preferred the digital scan and reported less inconvenience, less shortness of breath, less fear of repeating the impression, and fewer feelings of helplessness during the procedure. Copyright © 2015 Editorial Council