Processing techniques for data from the GKSS pressure suppression experiments

International Nuclear Information System (INIS)

Holman, G.S.; McCauley, E.W.

1980-01-01

This report describes techniques developed at LLNL for processing data from large-scale steam condensation experiments being performed by the GKSS Research Center in the Federal Republic of Germany. In particular, the computer code GKPLOT, a special evaluation program for generating time-history plots and numerical output files of GKSS data, will be discussed together with tape handling techniques to unblock the data to a form compatible with the LLNL octopus computer network. Using these data processing techniques, we have provided a convenient means of independently examining and analyzing a very extensive data base for steam condenstaion phenomena. In addition, the techniques developed for handling the GKSS data are applicable to the treatment of similar, but perhaps differently structured, experiment data sets

GKSS. Annual report 2007/2008. Science use; GKSS. Jahresbericht 2007/2008. Wissenschaft nutzen

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-06-15

The following topics are dealt with: Titanium aluminide alloys, microscopy in materials research, a new generation of membranes based on nanostructured polymers, the GKSS Engineering Materials Science Synchrotron, regenerativ medicine, the colour of the coastal sea, news from the North German Climate Office, the climate change for the Baltic sea basin, polyfluorinated compounds as pollutant in the coastal environment, the FRG 1 research reactor. (HSI)

GKSS annual report 1992

International Nuclear Information System (INIS)

1993-01-01

The GKSS R + D programme was developed in cooperation with state and Laender authorities, especially the Federal Minister of Research and Technology. It is carried out in cooperation with the industry, the universities of North Germany and Berlin, and other institutions both in Germany and abroad. The 1991 programme comprised four main activities: materials research; reactor safety research; environmental research, climate research, environmental engineering; underwater engineering. (orig.) [de

Scientific and techical reports of GKSS, 1979

International Nuclear Information System (INIS)

1980-01-01

This catalogue lists the authors and titles of all external GKSS reports (E reports) published in 1979. Except for reprints of journal articles, also abstracts and bibliographic data are given. (orig./HP) [de

GKSS scientific and technical reports 1991

International Nuclear Information System (INIS)

1992-01-01

The following review contains - arranged by the main field of research - authors and titles of external GKSS reports published in 1991. Abstracts and bibliographical data are presented with the exception and reprints from journal articles, proceeding papers, and from contributions to monographs. (orig.) [de

GKSS. Annual report 2005/2006. Science use; GKSS. Jahresbericht 2005/2006. Wissenschaft nutzen

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The annual report of the GKSS research centers presents selected activities from the research program: light weight structures for transportation and energy, synchrotron radiation for materials research development of x-ray mirrors for VUV-free electron lasers, membranes in process- and biomedical technology, neutralization of acid lakes, membranes for bioartificial organs, the coastal environment, maxwave project, mercury deposition fluxes into arctic and antarctic regions, monitoring systems for coastal regions, research reactor, training facilities. (GL)

Scientific technical reports of the GKSS 1985

International Nuclear Information System (INIS)

1986-01-01

The survey gives the names of authors and the titles of all external GKSS reports published in 1985, of which - with the exception of reprints in journals - abstracts and/or bibliographic data are given. (orig./PW) [de

GKSS scientific and technical reports 1993

International Nuclear Information System (INIS)

1994-01-01

The review contains - arranged by the main fields of research - authors and titles of external GKSS reports published in 1993. Abstracts and bibliographical data are presented with the exception of reprints from journal articles, proceeding papers, and from contributions to monographs. A general index in numerical order is supplemented. (orig.) [de

Forschungszentrum Juelich. Annual report 2013; Forschungszentrum Juelich. Jahresbericht 2013

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank; Roegener, Wiebke

2014-07-15

The annual report 2013 of the Forschungszentrum Juelich covers research activities, including high-lights of brain science, electrically controllable quantum bits, climate science and atmosphere research, knowledge management, including education and international cooperation, and an economic survey.

GKSS scientific-technical reports of the year 1986

International Nuclear Information System (INIS)

1987-01-01

The survey lists authors and titles of all external reports published in 1986 by the GKSS (E-reports). Following the list, all publications are characterised by an abstract and/or bibliographic data, except for reprints of journal articles. (orig./GG) [de

Scientific-technical reports of the GKSS 1990

International Nuclear Information System (INIS)

1991-01-01

The following review contains arranged by the main fields of research authors and titles of all external GKSS reports published in 1990. Abstracts and bibliographical data are presented with the exception of reprints from journal articles, proceeding papers, and contributions to monographs. A general index in numerical order is supplemented. (orig.) [de

Scientific-technical reports of the GKSS 1989

International Nuclear Information System (INIS)

1990-01-01

The following review contains, arranged by the main fields of research, authors and titles of all external GKSS reports published in 1989. Abstracts and bibliographical data are presented with the exception of reprints form journal articles, proceedings papers, and contributions to monographs. A general index in numerical order is supplemented. (orig./HK) [de

Quality assurance measures at the Geesthacht research reactor FRG-1

International Nuclear Information System (INIS)

Voss, J.; Krull, W.; Schmidt, K.

1995-01-01

The major part of the quality system for the FRG is already in practical use; other parts require extensive preparations and therefore transition periods of different lengths before they can be introduced. GKSS is aware that beside the other upgrading and refurbishment activities, these duality assurance measures will be very important in ensuring the operation of the FRG-1 research reactor over the coming 15 years or more. (orig.)

Forschungszentrum Juelich. Annual report 2016; Forschungszentrum Juelich. Jahresbericht 2016

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank; Lueers, Katja; Roegener, Wiebke; Stahl-Busse, Brigitte

2017-07-15

The annual report 2016 of the Forschungszentrum Juelich covers research activities, including high-lights of structural biochemistry (Alzheimer research), material research (skyrmions), computer simulation (e.g. of flexible blood cells), quantum physics (100 qubit era), photovoltaics, battery research, environmental research, climate research, biotechnology and community codes, including education and international cooperation.

Increased burnup of fuel elements

International Nuclear Information System (INIS)

Ahlf, J.

1983-01-01

The specialists' group for fuel elements of the Kerntechnische Gesellschaft e.V. held a meeting on ''Increased Burnup of Fuel Elements'' on 9th and 10th of November 1982 at the GKSS Research Center Geesthacht. Most papers dealt with the problems of burnup increase of fuel elements for light water reactors with respect to fuel manufacturing, power plant operation and reprocessing. Review papers were given on the burnup limits for high temperature gas cooled reactors and sodium fast breeder reactors. The meeting ended with a presentation of the technical equipment of the hot laboratory of the GKSS and the programs which are in progress there. (orig.) [de

GKSS. Annual report 2007/2008. Science use

International Nuclear Information System (INIS)

2008-06-01

The following topics are dealt with: Titanium aluminide alloys, microscopy in materials research, a new generation of membranes based on nanostructured polymers, the GKSS Engineering Materials Science Synchrotron, regenerativ medicine, the colour of the coastal sea, news from the North German Climate Office, the climate change for the Baltic sea basin, polyfluorinated compounds as pollutant in the coastal environment, the FRG 1 research reactor. (HSI)

GKSS. Annual report 2005/2006. Science use

International Nuclear Information System (INIS)

2006-01-01

The annual report of the GKSS research centers presents selected activities from the research program: light weight structures for transportation and energy, synchrotron radiation for materials research development of x-ray mirrors for VUV-free electron lasers, membranes in process- and biomedical technology, neutralization of acid lakes, membranes for bioartificial organs, the coastal environment, maxwave project, mercury deposition fluxes into arctic and antarctic regions, monitoring systems for coastal regions, research reactor, training facilities. (GL)

US NRC/LLL liaison with the Federal Republic of Germany for the GKSS-PSS steam condensation tests. Progress report No. 1

International Nuclear Information System (INIS)

McCauley, E.W.

1979-01-01

This progress report for the USNRC/LLL Liaison program with the Federal Republic of Germany regarding boiling water reactor containment multivent steam condensation tests being conducted by GKSS (Gesellschaft fuer Kernenergieverwertung in Schiffbau und Schiffahrt) address program activity during the period of May-June 1979. During this period the program scope was defined, initial contacts between LLL and GKSS were established, and the first trip by an LLL representative to the GKSS test facility was taken

Activities at Forschungszentrum Juelich in Safeguards Analytical Techniques and Measurements

International Nuclear Information System (INIS)

Duerr, M.; Knott, A.; Middendorp, R.; Niemeyer, I.; Kueppers, S.; Zoriy, M.; Froning, M.; Bosbach, D.

2015-01-01

The application of safeguards by the IAEA involves analytical measurements of samples taken during inspections. The development and advancement of analytical techniques with support from the Member States contributes to strengthened and more efficient verification of compliance with non-proliferation obligations. Since recently, a cooperation agreement has been established between Forschungszentrum Juelich and the IAEA in the field of analytical services. The current working areas of Forschungszentrum Juelich are: (i) Production of synthetic micro-particles as calibration standard and reference material for particle analysis, (ii) qualification of the Forschungszentrum Juelich as a member of the IAEA network of analytical laboratories for safeguards (NWAL), and (iii) analysis of impurities in nuclear material samples. With respect to the synthesis of particles, a dedicated setup for the production of uranium particles is being developed, which addresses the urgent need for material tailored for its use in quality assurance and quality control measures for particle analysis of environmental swipe samples. Furthermore, Forschungszentrum Juelich has been nominated as a candidate laboratory for membership in the NWAL network. To this end, analytical capabilities at Forschungszentrum Juelich have been joined to form an analytical service within a dedicated quality management system. Another activity is the establishment of analytical techniques for impurity analysis of uranium-oxide, mainly focusing on inductively coupled mass spectrometry. This contribution will present the activities at Forschungszentrum Juelich in the area of analytical measurements and techniques for nuclear verification. (author)

GKSS. Annual report 2001/2002. Basics for tomorrow

International Nuclear Information System (INIS)

Christiansen, H.F.

2002-01-01

The annual report of the GKSS research centers presents selected activities from the research program: light weight structures for transportation and energy, synchrotron radiation for materials research development of x-ray mirrors for VUV-free electron lasers, membranes in process- and biomedical technology, neutralization of acid lakes, membranes for bioartificial organs, the coastal environment, maxwave project, mercury deposition fluxes into arctic and antarctic regions, monitoring systems for coastal regions, research reactor, training facilities

Annual report 1973

International Nuclear Information System (INIS)

1973-01-01

The GKSS scientific annual report summarizes the problems and results of the research and development projects of 1973. In contrast to earlier annual reports, a comprehensive description of the research facilities is not included. The annual report was extended by the paragraph 'Financial Report 1973' in the chapter 'Development of Geesthacht Research Centre'. The financial report gives a survey of the financial transactions and the major operations of the year under review. (orig./AK) [de

Forschungszentrum Juelich. Annual report 2015

International Nuclear Information System (INIS)

Frick, Frank; Lueers, Katja; Roegener, Wiebke; Stettien, Annette; Trautwein, Ilse; Stahl-Busse, Brigitte

2016-07-01

The annual report 2015 of the Forschungszentrum Juelich covers research activities, including high-lights of brain science, electrically controllable quantum bits, climate science and atmosphere research, knowledge management, including education and international cooperation, and an economic survey.

Forschungszentrum Juelich. Annual report 2013

International Nuclear Information System (INIS)

Frick, Frank; Roegener, Wiebke

2014-07-01

The annual report 2013 of the Forschungszentrum Juelich covers research activities, including high-lights of brain science, electrically controllable quantum bits, climate science and atmosphere research, knowledge management, including education and international cooperation, and an economic survey.

Cost accounting at GKSS

International Nuclear Information System (INIS)

Hinz, R.

1979-01-01

The GKSS has a cost accounting system comprising cost type, cost centre and cost unit accounting which permits of a comprehensive and detailed supervision of the accural of costs and use of funds, makes price setting for outside orders possible and provides the necessary data for decision-making and planning. It fulfills the requirement for an ordered accounting system; it is therefore guaranteed that there exists between financial accounts department and cost accounting a proper demarcation and transition, that costs are accounted fully only on the basis of vouchers and only once, evaluation and distribution are unified and the principle of causation is observed. Two employees are engaged in costs and services accounting. Although we strive to effect adaptations as swiftly as possible, and constantly to adapt refinements and supplementary processes for the improvement of the system, this can only occur within the scope of, and with the exactitude necessary for the required information. (author)

Forschungszentrum Juelich. Annual report 2016

International Nuclear Information System (INIS)

Frick, Frank; Lueers, Katja; Roegener, Wiebke; Stahl-Busse, Brigitte

2017-07-01

The annual report 2016 of the Forschungszentrum Juelich covers research activities, including high-lights of structural biochemistry (Alzheimer research), material research (skyrmions), computer simulation (e.g. of flexible blood cells), quantum physics (100 qubit era), photovoltaics, battery research, environmental research, climate research, biotechnology and community codes, including education and international cooperation.

Forschungszentrum Rossendorf. Institute of Safety Research. Annual report 1998

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1999-07-01

The Institute of Safety Research is one of the five scientific institutes of Forschungszentrum Rossendorf e.V. The Forschungszentrum Rossendorf is a member of the 'Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz' und is funded by the Federal Ministry of Education and Research and by the Saxon Ministry of Science and Arts with 50% each. The research work of the institute aims at the assessment and increase of the safety and environmental sustainability of technical plants. The emphasis is put on the development and validation of mathematical and physical models for process and plant analysis, and of techniques for process and components monitoring. Subject of investigations are equally nuclear plants and installations of process industries. (orig.)

GeNF - experimental report 2003

International Nuclear Information System (INIS)

Schreyer, A.; Vollbrandt, J.; Willumeit, R.

2004-01-01

At the Geesthacht Neutron Facility GeNF about 210 experiments were performed in 2003 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guest and by the GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 76 contributions in the present annual experimental report for the year 2003. The contributions may contain one or also several combined experiments. During 2003 the GKSS research reactor FRG-1 achieved an operation time of 252 days at the full 5 MW reactor power providing a neutron flux of ca. 1,4 x 10 14 thermal neutrons / cm 2 s. The cold neutron source was available during the complete operation time. The focus of the in house R and D work at GeNF instruments was the characterisation of metal alloys, the analysis of stresses in welds and technical structures at ARES, FSS, DCD and SANS-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at PNR and ROeDI. The reflectomer TOREMA was thoroughly upgraded to the instrument NeRo and now offers new measurement possibilities. In the appendices the progress of the project REFSANS at FRM-II is reported as well as the experimental activities of the newly installed GKSS outstation HARWI-II at DESY. (orig.)

GeNF - experimental report 2003

Energy Technology Data Exchange (ETDEWEB)

Schreyer, A; Vollbrandt, J; Willumeit, R [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. for Materials Research

2004-07-01

At the Geesthacht Neutron Facility GeNF about 210 experiments were performed in 2003 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guest and by the GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 76 contributions in the present annual experimental report for the year 2003. The contributions may contain one or also several combined experiments. During 2003 the GKSS research reactor FRG-1 achieved an operation time of 252 days at the full 5 MW reactor power providing a neutron flux of ca. 1,4 x 10{sup 14} thermal neutrons / cm{sup 2} s. The cold neutron source was available during the complete operation time. The focus of the in house R and D work at GeNF instruments was the characterisation of metal alloys, the analysis of stresses in welds and technical structures at ARES, FSS, DCD and SANS-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at PNR and ROeDI. The reflectomer TOREMA was thoroughly upgraded to the instrument NeRo and now offers new measurement possibilities. In the appendices the progress of the project REFSANS at FRM-II is reported as well as the experimental activities of the newly installed GKSS outstation HARWI-II at DESY. (orig.)

Advances in 14 MeV neutron activation analysis by means of a new intense neutron source

International Nuclear Information System (INIS)

Pepelnik, R.; Fanger, H.-U.; Michaelis, W.; Anders, B.

1982-01-01

A new intense 14 MeV neutron generator with cylindrical acceleration structure has been put in operation at the GKSS Research Center Geesthacht. The sealed neutron tube is combined with a fast pneumatic rabbit system with particular capabilities for neutron activation analysis involving short-lived reaction products. The sample transfer time is less than 140 ms. The maximum neutron flux available for activation is 5.2x10 10 n/cm 2 s. Theoretical sensitivity predictions made in a previous study have been verified for some important trace elements. As a first application, samples of freeze-dried suspended matter and fishes of the Elbe river were analyzed. (author)

SANS-1 Experimental reports of 2000

International Nuclear Information System (INIS)

Willumeit, R.; Haramus, V.

2001-01-01

The instrument SANS-1 at the Geesthacht neutron facility GeNF was used for scattering experiments in 2000 at 196 of 200 days of reactor and cold source operation. The utilisation was shared between the in-house R and D program and user groups from different universities and research centers. These measurements were performed and analysed either by guest scientists or GKSS staff. The focus of the work in 2000 at the experiment SANS-1 was the structural investigation of hydrogen containing substances such as biological macromolecules (ribosomes, protein-RNA-complexes, protein solutions, glycolipids and membranes), molecules which are important in the fields of environmental research (refractoric organic substances) and technical chemistry (surfactants, micelles). (orig.) [de

InfiniBand-Experiences at the Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Schwickerath, Ulrich; Heiss, Andreas

2006-01-01

The Institute for Scientific Computing (IWR) at the Forschungszentrum Karlsruhe has been evaluating the InfiniBand [InfiniBand Trade Association, InfiniBand Architecture Specification, Release 1.0, October 24, 2000] technology since end of the year 2002. The performance of the interconnect has been tested on different platforms and architectures using MPI. Sequential file transfer performance was measured with the RFIO protocol running on native InfiniBand [Ulrich Schwickerath, Andreas Heiss, Nucl. Instr. and Meth. A 534 (2004) 130, http://www.fzk.de/infiniband], and a newly developed InfiniBand-enabled version of the XROOTD

GeNF - Experimental report 2007

Energy Technology Data Exchange (ETDEWEB)

Pranzas, P K; Schreyer, A; Willumeit, R [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Materialforschung

2008-11-05

At the Geesthacht Neutron Facility GeNF about 203 experiments were performed in 2007 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guests and by the GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 70 contributions in the present annual experimental report for the year 2007. The contributions may contain one or also several combined experiments. During 2007 the GKSS research reactor FRG-1 achieved an operation time of 204 days at the full 5 MW reactor power providing a neutron flux of ca. 1.4 x 10{sup 14} thermal neutrons/cm{sup 2}s. In May/June 2007 the FRG-1 was upgraded with a new cold neutron source yielding a flux increase at the five instruments using cold neutrons of up to 40 %. The focus of the in house R and D work at GeNF instruments in 2007 was the characterisation of nano-structures in engineering materials, the analysis of stresses and textures in welds and technical structures at SANS-2, DCD, ARES-2 and TEX-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at NeRo, PNR, POLDI and ROeDI. The modern experiment control hardware and software based on LabView was continuously improved on all instruments. In the appendices I and II the experimental reports of the GKSS outstation at the FRM II are attached as well as of the GKSS outstation at DESY. At the neutron reflectometer REFSANS at FRM II measurements are possible using a broad range of the scattering vector with reflectivities up to 10{sup -7}. Three reports show the activities of GKSS in the field of texture measurement at the instrument STRESS-SPEC. The instrument HARWI II at DESY is accepted very well by the community and is overbooked in all fields

GeNF - Experimental report 2008

Energy Technology Data Exchange (ETDEWEB)

Pranzas, Philipp Klaus; Mueller, Martin; Willumeit, Regine; Schreyer, Andreas [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Materialforschung

2009-12-11

At the Geesthacht Neutron Facility GeNF about 182 experiments were performed in 2008 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guests, by GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 76 contributions in the present annual experimental report for the year 2008. The contributions may contain several combined experiments. During 2008 the GKSS research reactor FRG-1 achieved an operation time of 175 days at the full 5 MW reactor power providing a neutron flux of ca. 1.4.10{sup 14} thermal neutrons/cm{sup 2} s. The focus of the in house R and D work at GeNF instruments in 2008 was the characterisation of nanostructures in engineering materials, the analysis of stresses and textures in welds and technical structures at SANS-2, DCD, ARES-2 and TEX-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at NeRo, PNR, POLDI and ROeDI. The modern experiment control hardware (e.g. sample environments, like magnets, cryostats or furnaces) and software based on LabView was continuously improved on all instruments. In the appendices I and II the experimental reports of the GKSS outstation at the FRM II are attached as well as of the GKSS outstation at DESY. The massive activity at the FRM II outstation is documented by the increasing number of REFSANS reports, accumulated to nine. Three reports show the activities of GKSS in the field of texture measurement at the instrument STRESS-SPEC. The instrument HARWI II at the synchrotron storage ring DORIS III at DESY is accepted very well by the community and is heavily overbooked in all fields (tomography, diffraction, etc.). After an 8-month shutdown period for an upgrade in the frame

GeNF - Experimental report 2008

International Nuclear Information System (INIS)

Pranzas, Philipp Klaus; Mueller, Martin; Willumeit, Regine; Schreyer, Andreas

2009-01-01

At the Geesthacht Neutron Facility GeNF about 182 experiments were performed in 2008 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guests, by GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 76 contributions in the present annual experimental report for the year 2008. The contributions may contain several combined experiments. During 2008 the GKSS research reactor FRG-1 achieved an operation time of 175 days at the full 5 MW reactor power providing a neutron flux of ca. 1.4.10 14 thermal neutrons/cm 2 s. The focus of the in house R and D work at GeNF instruments in 2008 was the characterisation of nanostructures in engineering materials, the analysis of stresses and textures in welds and technical structures at SANS-2, DCD, ARES-2 and TEX-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at NeRo, PNR, POLDI and ROeDI. The modern experiment control hardware (e.g. sample environments, like magnets, cryostats or furnaces) and software based on LabView was continuously improved on all instruments. In the appendices I and II the experimental reports of the GKSS outstation at the FRM II are attached as well as of the GKSS outstation at DESY. The massive activity at the FRM II outstation is documented by the increasing number of REFSANS reports, accumulated to nine. Three reports show the activities of GKSS in the field of texture measurement at the instrument STRESS-SPEC. The instrument HARWI II at the synchrotron storage ring DORIS III at DESY is accepted very well by the community and is heavily overbooked in all fields (tomography, diffraction, etc.). After an 8-month shutdown period for an upgrade in the frame of the

GeNF - Experimental report 2007

International Nuclear Information System (INIS)

Pranzas, P.K.; Schreyer, A.; Willumeit, R.

2008-01-01

At the Geesthacht Neutron Facility GeNF about 203 experiments were performed in 2007 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guests and by the GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 70 contributions in the present annual experimental report for the year 2007. The contributions may contain one or also several combined experiments. During 2007 the GKSS research reactor FRG-1 achieved an operation time of 204 days at the full 5 MW reactor power providing a neutron flux of ca. 1.4 x 10 14 thermal neutrons/cm 2 s. In May/June 2007 the FRG-1 was upgraded with a new cold neutron source yielding a flux increase at the five instruments using cold neutrons of up to 40 %. The focus of the in house R and D work at GeNF instruments in 2007 was the characterisation of nano-structures in engineering materials, the analysis of stresses and textures in welds and technical structures at SANS-2, DCD, ARES-2 and TEX-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at NeRo, PNR, POLDI and ROeDI. The modern experiment control hardware and software based on LabView was continuously improved on all instruments. In the appendices I and II the experimental reports of the GKSS outstation at the FRM II are attached as well as of the GKSS outstation at DESY. At the neutron reflectometer REFSANS at FRM II measurements are possible using a broad range of the scattering vector with reflectivities up to 10 -7 . Three reports show the activities of GKSS in the field of texture measurement at the instrument STRESS-SPEC. The instrument HARWI II at DESY is accepted very well by the community and is overbooked in all fields (tomography

Eigenvibration measurement of the condensation of the GKSS pressure suppression test rig

International Nuclear Information System (INIS)

Boettcher, G.; Kolb, M.

1981-01-01

A modal analysis - which characterizes a structure's vibration modes by resonant frequency, damping and shape vector - was undertaken for the wetwell of the GKSS PSS facility in order to better explain the periodicities measured for the pool pressure and for the wetwell wall movements in blowdown experiments. The wetwell was hit at one point by a sledge hammer instrumented with a force transducer accelerometers were moved to all points to be included in the shape vector which was obtained by a computer-aided modal analysis system. Six global modes of the wetwell were identified. The frequencies of the three lowest modes (40, 52, 78 Hz) correspond plausibly to frequencies observed during blowdown experiments. (orig.) [de

GeNF - Experimental report 2006

International Nuclear Information System (INIS)

Pranzas, P.K.; Schreyer, A.; Willumeit, R.

2007-01-01

At the Geesthacht Neutron Facility GeNF about 212 experiments were performed in 2006 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guests and by the GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 71 contributions in the present annual experimental report for the year 2006. The contributions may contain one or also several combined experiments. During 2006 the GKSS research reactor FRG-1 achieved an operation time of 197 days at the full 5 MW reactor power providing a neutron flux of ca. 1.4 x 10 14 thermal neutrons/cm 2 s. The cold neutron source was available during the complete operation time. The focus of the in house R and D work at GeNF instruments was the characterisation of nanostructures in engineering materials, the analysis of stresses and textures in welds and technical structures at ARES-2, TEX-2, DCD and SANS-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at PNR, NeRo, POLDI and ROeDI. The thoroughly upgraded residual stress diffractomer ARES-2 went in full operation in spring 2006 as well as the new neutron tomography device at GENRA-3. The installation of modern experiment control hardware and software based on LabView was completed on all designated instruments. In the appendices I and II the experimental reports of REFSANS at FRM II are attached as well as of the GKSS outstation HARWI-II at DESY. Both instruments started full operation in 2006. (orig.)

GeNF - Experimental report 2006

Energy Technology Data Exchange (ETDEWEB)

Pranzas, P K; Schreyer, A; Willumeit, R [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. of Materials Research

2007-07-01

At the Geesthacht Neutron Facility GeNF about 212 experiments were performed in 2006 by GKSS and by or for external users, partners or contractors. In most cases the measurements were performed and analysed in cooperation by the guests and by the GKSS staff or by the permanent external user group staff. The activities, which are based on a proposal procedure and on the in house R and D program, are reported in 71 contributions in the present annual experimental report for the year 2006. The contributions may contain one or also several combined experiments. During 2006 the GKSS research reactor FRG-1 achieved an operation time of 197 days at the full 5 MW reactor power providing a neutron flux of ca. 1.4 x 10{sup 14} thermal neutrons/cm{sup 2}s. The cold neutron source was available during the complete operation time. The focus of the in house R and D work at GeNF instruments was the characterisation of nanostructures in engineering materials, the analysis of stresses and textures in welds and technical structures at ARES-2, TEX-2, DCD and SANS-2, the structural investigation of hydrogen containing substances such as polymers, colloids and biological macromolecules at SANS-1 as well as the characterisation of magnetic thin films at PNR, NeRo, POLDI and ROeDI. The thoroughly upgraded residual stress diffractomer ARES-2 went in full operation in spring 2006 as well as the new neutron tomography device at GENRA-3. The installation of modern experiment control hardware and software based on LabView was completed on all designated instruments. In the appendices I and II the experimental reports of REFSANS at FRM II are attached as well as of the GKSS outstation HARWI-II at DESY. Both instruments started full operation in 2006. (orig.)

Forschungszentrum Rossendorf. Institute of Safety Research. Report. January 1998 - June 1999

Energy Technology Data Exchange (ETDEWEB)

Weiss, F P; Rindelhardt, U [eds.

1999-09-01

The Institute of Safety Research is one of the five scientific institutes of Forschungszentrum Rossendorf e.V. The Forschungszentrum Rossendorf is a member of the 'Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz' and is funded by the Federal Ministry of Education and Research and by the Saxon Ministry of Science and Arts with 50% each. The research work of the institute aims at the assessment and increase of the safety and environmental sustainability of technical plants. The emphasis is put on the development and validation of mathematical and physical models for process and plant analysis, and of techniques for process and components monitoring. Subject of investigations are equally nuclear plants and installations of process industries. To analyse the thermo-fluiddynamics of normal plant operation and of the behaviour during accidents, physical models and computer codes are developed for multi-phase and multi-component flows, and for the space and time dependent heat release (neutron kinetics, chemical kinetics). (orig.)

Forschungszentrum Rossendorf. Institute of Safety Research. Report. January 1998 - June 1999

Energy Technology Data Exchange (ETDEWEB)

Weiss, F.P.; Rindelhardt, U. [eds.

1999-09-01

The Institute of Safety Research is one of the five scientific institutes of Forschungszentrum Rossendorf e.V. The Forschungszentrum Rossendorf is a member of the 'Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz' and is funded by the Federal Ministry of Education and Research and by the Saxon Ministry of Science and Arts with 50% each. The research work of the institute aims at the assessment and increase of the safety and environmental sustainability of technical plants. The emphasis is put on the development and validation of mathematical and physical models for process and plant analysis, and of techniques for process and components monitoring. Subject of investigations are equally nuclear plants and installations of process industries. To analyse the thermo-fluiddynamics of normal plant operation and of the behaviour during accidents, physical models and computer codes are developed for multi-phase and multi-component flows, and for the space and time dependent heat release (neutron kinetics, chemical kinetics). (orig.)

EFAM GTP-CREEP 02 - the GKSS test procedure for determining the creep crack extension of materials

International Nuclear Information System (INIS)

Schwalbe, K.H.

2002-01-01

This document describes a fracture mechanics method in procedural form for determining the creep crack extension of materials. It is based on the unified fracture mechanics test method EFAM GTP 02, the ASTM standard E 1457-98, activities of VAMAS TWA 19, and GKSS experience in creep crack extension testing. It introduces novel features such as the rate of the δ 5 crack tip opening displacement, the crack tip opening angle, and the middle cracked tension specimen. (orig.) [de

Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research. Annual Report 1994

International Nuclear Information System (INIS)

Moeller, W.; Wieser, E.; Kirch, S.

1995-03-01

This volume contains the 1994 annual report describing the scientific activity of the Institute of Ion Beam Physics and Material Research (Forschungszentrum Rossendorf, FZR). This institute is devoted to the application of ion beams for the modification and analysis of near-surface layers of solids. (MSA)

Continuous backfitting measures for the FRG-1 and FRG-2 research reactors

International Nuclear Information System (INIS)

Blom, K.H.; Falck, K.; Krull, W.

1990-01-01

The GKSS-Research Centre Geesthacht GmbH has been operating the research reactors FRG-1 and FRG-2 with power levels of 5 MW and 15 MW for 31 and 26 years respectively. Safe operation at full power levels over so many years with an average utilization between 180 d to 250 d per year is possible only with great efforts in modernization and upgrading of the research reactors. Emphasis has been placed on backfitting since around 1975. At that time within the Federal Republic of Germany many new guidelines, rules, ordinances, and standards in the field of (power) reactor safety were published. Much work has been done on the modernization of the FRG-1 and FRG-2 research reactors therefore within the last ten years. Work done within the last two years and presently underway includes: measures against water leakage through the concrete and along the beam tubes; repair of both cooling towers; modernization of the ventilation system; measures for fire protection; activities in water chemistry and water quality; installation of a double tubing for parts of the primary piping of the FRG-1; replacement of instrumentation, process control systems (operation and monitoring system) and alarm system; renewal of the emergency power supply; installation of internal lightning protection; installation of a cold neutron source; enrichment reduction for FRG-1. These efforts will continue to allow safe operation of our research reactors over their whole operational life

Getting Scientists Ready for Open Access: The Approaches of Forschungszentrum Jülich

Directory of Open Access Journals (Sweden)

Thomas Arndt

2018-05-01

Full Text Available Many scientific institutions are faced with the question of how they should inform their scientists and scientific coordinators about the option of publishing open access. This task is one that libraries have taken upon themselves: libraries are familiar with the market participants and have years of experience in teaching information and publication literacy. This case report looks at two approaches taken by the Central Library of Forschungszentrum Jülich in 2017. It highlights the motivation, strategy, resources and implementation, as well as the first evaluation of both approaches. The first approach was a redesign of the training courses offered by the Central Library with a focus on the target groups and new contents. The second approach was implemented as part of International Open Access Week and involved offering an information event tailored to each scientific institute. The event was customized to meet the needs of the target group defined by each institute, the institute itself, and was organized individually. As a result of these efforts, the open access rate increased over the last few months and at 48% open access in 2017, Forschungszentrum Jülich is well on its way to achieving the open access goals set by the Helmholtz Association.

Mechanized hyperbaric welding by robots

International Nuclear Information System (INIS)

Aust, E.; Santos, J.F. dos; Bohm, K.H.; Hensel, H.D.

1988-01-01

At the GKSS-Forschungszentrum investigations are carried out on mechanized welded test plates produced under working pressure between 10 to 110 bar in breathable TRIMIX-5-atmosphere. The welds are performed by a modified industrial robot, which was adapted in its components to withstand these severe conditions. Variations on the welding parameters were made to maintain a stable arc as well as to provide on indication of the effect of the variables on the mechanical properties of the welded joint. During all tests the robot showed a very good function. Good reliable welds were achieved meeting the requirements according API II04 or BS 4515-1984. (orig.) [de

Total reflection X-ray fluorescence analysis

International Nuclear Information System (INIS)

Michaelis, W.; Prange, A.

1987-01-01

In the past few years, total reflection X-ray flourescence analysis (TXRF) has found an increasing number of assignments and applications. Experience of trace element analysis using TXRF and examples of applications are already widespread. Therefore, users of TXRF had the opportunity of an intensive exchange of their experience at the 1st workshop on total reflection X-ray fluorescence analysis which took place on May 27th and 28th 1986 at the GKSS Research Centre at Geesthacht. In a series of lectures and discussions dealing with the analytical principle itself, sample preparation techniques and applications as well as comuter programs for spectrum evaluation, the present state of development and the range of applications were outlined. 3 studies out of a total of 14 were included separately in the INIS and ENERGY databases. With 61 figs., 12 tabs [de

Forschungszentrum Juelich GmbH, Institut fuer Kernphysik. Annual report 1991

International Nuclear Information System (INIS)

1992-03-01

During the year 1991 the work concentrated on building the Cooler Synchrotron COSY-Juelich. The experimental activity was accompanied by theoretical studies in the field of medium energy nuclear physics. The preparation of COSY experiments concerned the realization of multipurpose facilities and other experiments. Work going on in the field of theoretical nuclear physics was strongly connected with research projects at COSY and processes induced in the proton-antiproton interaction. Through nuclear spectroscopy two-phonon octupole excitation had been identified in Gd-148. The ISIS ECR source has been used for the production of ion beams for atomic physics research. (DG)

GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Annual report 1995; GSF-Forschungszentrum fuer Umwelt und Gesundheit, Institut fuer Hydrologie. Jahresbericht 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The 1995 annual report of the Institute of Hydrology presents the findings of 19 current research projects on different subjects in hydrology. It is supplemented by information on cooperation with other scientific institutions in the form of lists of publications and reports, lectures and posters, university teaching projects, and finished and current dissertations. (VHE) [Deutsch] Der Jahresbericht 1995 des Institutes fuer Hydrologie im GSF-Forschungszentrum fuer Umwelt und Gesundheit stellt die Ergebnisse von derzeit 19 laufenden Untersuchungen zu unterschiedlichen hydrologischen Themen vor. Ergaenzt werden die Ausfuehrungen durch einen Ueberblick ueber die Zusammenarbeit mit anderen wissenschaftlichen Institutionen in Form von Verzeichnissen der Veroeffentlichungen und Berichte, der Vortraege und Poster, der Beitraege zur Lehre an Hochschulen sowie der abgeschlossenen und laufenden Dissertationen. (VHE)

Past and present situation of nuclear research at Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Scholtyssek, W.

2001-01-01

The case of Forschungszentrum Karlsruhe is presented which had to transform from a centre devoted to nuclear power R and D to one in which this activity is allocated only 20% of the resources. A large number of operating nuclear power reactors coupled with the Government decision to phase out nuclear power is causing serious concerns regarding the availability of human resources for meeting the long term needs of nuclear facilities. The Energy Division of the research centre currently focuses mainly on safety research and on nuclear fusion. Another Division of the centre has nuclear facility decommissioning as one of the programmes. Independent research in areas of essential need for nuclear facilities must be carried out to maintain know how. (author)

Hydrodynamical tests with an original PWR heat removal pump

International Nuclear Information System (INIS)

Wietstock, P.

1984-01-01

GKSS-Forschungszentrum performes hydrodynamical tests with an original PWR heat removal pump to analyse the influences of fluid parameters on the capacity and cavitation behavior of the pump in order to get further improvements of the quantification of the reached safety-level. It can be concluded, that in case of the tested heat removal pump the additional loads during transition from cavitation free operation into fully cavitation for the investigated operation point with 980 m 3 /h will be smaller than the alteration of loads during passing through the total characteristic. The results from cavitation tests for other operation points indicate, that this very important consequence especially for accident operation will be valid for the total specified pump flow area. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2004

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2005-01-01

The Institute of Safety Research (ISR) is one of the six Research Institutes of Forschungszentrum Rossendorf e.V. (FZR e.V.) which is a member institution of the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz (Leibniz Association). Together with the Institute of Radiochemistry, ISR constitutes the research programme ''Safety and Environment'' which is one from three scientific programmes of FZR. In the framework of this research programme, the institute is responsible for the two subprogrammes ''Plant and Reactor Safety'' and ''Thermal Fluid Dynamics'', respectively. We also provide minor contributions to the sub-programme ''Radio-Ecology''. Moreover, with the development of a pulsed photo-neutron source at the radiation source ELBE (Electron linear accelerator for beams of high brilliance and low emittance), we are involved in a networking project carried out by the FZR Institute of Nuclear and Hadron Physics, the Physics Department of TU Dresden, and ISR. (orig.)

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2001

International Nuclear Information System (INIS)

Fanghaenel, T.; Bernhard, G.; Engelmann, H.J.

2002-05-01

The Institute of Radiochemistry (IRC), one of the five institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Main goal is the quantification of the interaction and mobility of radionuclides in the geo- and biosphere. Because of their high radiotoxicity and long half-life the actinides are of special interest. Among the actinides uranium and its manifold interactions plays a major role in the institute's research activities. In addition the interactions of some important long-lived fission and decay products are studied. More than 60 scientists, technicians and PhD students are employed in the Institute of Radiochemistry. The research is focused on understanding the fundamental processes relevant for the behavior of radionuclides in the environment. Main topics are: Aquatic chemistry, Radionuclide interaction with mineral surfaces, Radionuclide interaction with biological materials (bacteria and plants), Modeling the radionuclide transport, Development of spectroscopic speciation methods We accomplished many new scientific results in the past year, which are presented in this Annual Report. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Weiss, F.P.; Rindelhardt, U. (eds.)

2005-07-01

The Institute of Safety Research (ISR) is one of the six Research Institutes of Forschungszentrum Rossendorf e.V. (FZR e.V.) which is a member institution of the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz (Leibniz Association). Together with the Institute of Radiochemistry, ISR constitutes the research programme ''Safety and Environment'' which is one from three scientific programmes of FZR. In the framework of this research programme, the institute is responsible for the two subprogrammes ''Plant and Reactor Safety'' and ''Thermal Fluid Dynamics'', respectively. We also provide minor contributions to the sub-programme ''Radio-Ecology''. Moreover, with the development of a pulsed photo-neutron source at the radiation source ELBE (Electron linear accelerator for beams of high brilliance and low emittance), we are involved in a networking project carried out by the FZR Institute of Nuclear and Hadron Physics, the Physics Department of TU Dresden, and ISR. (orig.)

Prof. Manfred Popp, Chairman of the Executive Board, Forschungszentrum Karlsruhe GmbH

CERN Multimedia

Patrice Loïez

2003-01-01

Prof. Popp is pictured here in the ATLAS detector assembly hall with Dr. Horst Wenninger of CERN.Photo 01: Prof. Popp (right) and Dr. Wenninger in front of one of the two vacuum vessels for the ATLAS end-cap toroid magnets.Photo 02: Prof. Popp (right) and Dr. Wenninger in front of one of eight 25-metre-long aluminium-alloy coil casings that will house the racetrack coils of the barrel toroid magnet system.

Research on transmutation and accelerator-driven systems at the Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Knebel, J.U.; Heusener, G.

2000-01-01

Transmutation is considered a promising technology worldwide for significantly reducing the amount and, thereby, the long-term radiotoxicity of high active waste (HAW) produced by the operation of nuclear power plants such as light water reactors (LWR). The maximum reduction of radiotoxicity could be by a factor of about 100. Transmutation is thus an alternative to the direct deposition of large volumes of highly radioactive waste. Transmutation presents the possibility of closing the fuel cycle including the minor actinides. Plutonium, minor actinides and long-lived fission products can be transmuted in a so called Accelerator Driven Sub-critical System (ADS), which consists of an accelerator, a target module and a subcritical blanket. This paper describes the work performed at Forschungszentrum Karlsruhe which is critically evaluating an ADS mainly with respect to its potential for transmuting minor actinides, to its feasibility and to safety aspects. The work is being done in the area of core design, neutronics, safety, system analyses, materials and corrosion. (orig.) [de

Experiences with ATM in a multivendor pilot system at Forschungszentrum Julich

Science.gov (United States)

Kleines, H.; Ziemons, K.; Zwoll, K.

1998-08-01

The ATM technology for high speed serial transmission provides a new quality of communication by introducing novel features in a LAN environment, especially support of real time communication, of both LAN and WAN communication and of multimedia streams. In order to evaluate ATM for future DAQ systems and remote control systems as well as for a high speed picture archiving and communications system for medical images, Forschungszentrum Julich has build up a pilot system for the evaluation of ATM and standard low cost multimedia systems. It is a heterogeneous multivendor system containing a variety of switches and desktop solutions, employing different protocol options of ATM. The tests conducted in the pilot system revealed major difficulties regarding stability, interoperability and performance. The paper presents motivations, layout and results of the pilot system. Discussion of results concentrates on performance issues relevant for realistic applications, e.g., connection to a RAID system via NFS over ATM.

LACOMERA - large scale experiments on core degradation, melt retention and coolability at the Forschungszentrum Karslruhe

International Nuclear Information System (INIS)

Miassoedov, A.; Alsmeyer, H.; Meyer, L.

2003-01-01

The LACOMERA project at the Forschungszentrum Karlsruhe is a 3 year shared-cost action within the Fifth Framework Programme which started in September 2002. The overall objectives of the LACOMERA project are to provide research institutions from the EU member countries and associated states access to large scale experimental facilities at the Forschungszentrum Karlsruhe which shall be used to increase the knowledge of the quenching of a degraded core and regaining melt coolability in the reactor pressure vessel, of possible melt dispersion to the cavity, of molten core concrete interaction and of ex-vessel melt coolability. One major aspect is to understand how these events affect the safety of European reactors so as to lead to soundly-based accident management procedures. The project will bring together interested partners of different European member states in the area of severe accident analysis and control, with the goal to increase the public confidence in the use of nuclear energy. Moreover, partners from the newly associated states should be included as far as possible, and therefore the needs of Eastern, as well as Western, reactors will be considered in LACOMERA project. The project offers a unique opportunity to get involved in the networks and activities supporting VVER safety, and for Eastern experts to get an access to large scale experimental facilities in a Western research organisation to improve understanding of material properties and core behaviour under severe accident conditions. As a result of the first call for proposals a project on air ingress test in the QUENCH facility has been selected. A second call for proposals is opened with a deadline of 31 December 2003. (author)

Siempelkamp Nukleartechnik GmbH

International Nuclear Information System (INIS)

2011-01-01

Siempelkamp Nukleartechnik GmbH, which is headquartered in Krefeld (Germany), is at the forefront of the nuclear technology companies in the Siempelkamp group. With over 2,700 employees, Siempelkamp is a traditional family enterprise, and its individual divisions represent it as an internationally active industrial supplier in the markets of machinery and plants, nuclear technology, and foundry technology. (orig.)

Photon science 2008. Highlights and HASYLAB annual report

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

The following topics are dealt with: A femtosecond X-ray/optical cross-correlator, ultrafast movies of nanoscale dynamics, massively parallel X-ray holography, clusters in super intense FLASH pulses, a chemical driven insulator-metal transition, tough silk, insight into the reactivity, the many faces of molecular assemblies in electronic devices, cooperative or self-centred electrons, visualizing a lost painting by Vincent van Gogh, metal contaminations in small water fleas, small-angle X-ray scattering as complement of crystallography, mapping the protein world, how metallic iron eats its own native oxide, hard X-ray diffraction imaging, the centre for free-electron laser science CFEL, the Hamburg EMBL unit, the Max-Planck unit for structural molecular biology, the GKSS Research Centre Geesthacht, the GFZ Helmholtz Centre Potsdam, the University of Hamburg on the DESY site, the light sources DORIS III, FLASH, PETRA III, and the European XFEL project, beamline enhancements and photon diagnostics at FLASH, undulator development for the European XFEL, special X-ray monochromators for PETRA III, high-power photon slits and shutters, the generation of brilliant beams, undulator demagnetization in LINAC based FELs, the control of experiments, advanced detection. (HSI)

Photon science 2008. Highlights and HASYLAB annual report

International Nuclear Information System (INIS)

2009-01-01

The following topics are dealt with: A femtosecond X-ray/optical cross-correlator, ultrafast movies of nanoscale dynamics, massively parallel X-ray holography, clusters in super intense FLASH pulses, a chemical driven insulator-metal transition, tough silk, insight into the reactivity, the many faces of molecular assemblies in electronic devices, cooperative or self-centred electrons, visualizing a lost painting by Vincent van Gogh, metal contaminations in small water fleas, small-angle X-ray scattering as complement of crystallography, mapping the protein world, how metallic iron eats its own native oxide, hard X-ray diffraction imaging, the centre for free-electron laser science CFEL, the Hamburg EMBL unit, the Max-Planck unit for structural molecular biology, the GKSS Research Centre Geesthacht, the GFZ Helmholtz Centre Potsdam, the University of Hamburg on the DESY site, the light sources DORIS III, FLASH, PETRA III, and the European XFEL project, beamline enhancements and photon diagnostics at FLASH, undulator development for the European XFEL, special X-ray monochromators for PETRA III, high-power photon slits and shutters, the generation of brilliant beams, undulator demagnetization in LINAC based FELs, the control of experiments, advanced detection. (HSI)

Interviewing German scientists on climate change. A preliminary study

Energy Technology Data Exchange (ETDEWEB)

Ungar, S. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Kuestenforschung; Toronto Univ., Scarborough (Canada)

2004-07-01

This study is based on in-depth interviews with 25 German scientists at the Coastal Research Institute of the GKSS-Forschungszentrum. It takes as its context the differential rhetoric and planning on climate change found in Germany and North America. The interviews try to throw light on the early German decision to address climate change, and to assess the current attitudes, beliefs and experiences of these German scientists. The results reveal a degree of complacency among these scientists, including a sense that Germany is not particularly threatened by climate change and has the capacity to adapt to it. The scientists are critical of inaction among the German population, but themselves uphold a ''light version'' of the precautionary principle. They have great difficulty translating the idea of climate change into popular metaphors that can be grasped by children. They strongly reject any link between German leadership on the issue as a result of a sense of guilt about the German past. (orig.)

Environmental remediation activities at WISMUT GmbH, Germany

International Nuclear Information System (INIS)

Saito, Hiroshi; Takahashi, Kuniaki; Miyasaka, Yasuhiko; Yamana, Hajimu

2007-01-01

The WISMUT GmbH has carried out environmental remediation activities since 1991 in former GDR (German Democratic Republic) to rehabilitate the environment and landscape which have been adversely affected by decades of unrestrained mining and processing of uranium ores. It is worthy of being mentioned especially that WISMUT GmbH's sites including waste rock dump, mill tailings pond, open pit mine and water treatment facilities with an area of 3,700ha have been rehabilitated practically and extensively, and these activities are planned to terminate in 2015 except for the water treatment. For safety assessment after remediation, the value of 1mSv/y (in excess of the background level) is applied to as an individual effective dose, from the recommendation of ICRP (International Commission on Radiological Protection). This report shows a summary of environmental remediation activities carried out by the WISMUT GmbH and related regulatory laws. (author)

Online Business Strategy: Mazda Motor Europe GmbH

OpenAIRE

Peltokangas, Merja

2009-01-01

Mazda Motors is a japanese car manufacturer, founded in 1920. The headquarter is located in Hiroshima, Japan and the European headquarter is located in Leverkusen, Germany. The aim of this thesis is to investigate how Mazda Motor Europe GmbH could improve its accessory sales in the future and reach more young customers. Based on the research results Mazda Motor Europe GmbH can see how the main competitors are positioned in the market and consider its own strategy. In the theory part o...

The PTB thermal neutron reference field at GeNF

International Nuclear Information System (INIS)

Boettger, R.; Friedrich, H.; Janssen, H.

2004-01-01

The experimental setup and procedure for the characterization of the thermal neutron reference field established at the Geesthacht neutron facility (GeNF) of the GKSS is described. The neutron beam, free in air, with a maximum flux of 10 6 s -1 , can easily be reduced to less than 10 4 s -1 by using a diaphragm variable in size and without changing the beam divergence. Also, the spectral distribution with a mean energy of 45 meV, measured by time-of-flight over a 6.6 m long flight path, is independent of the beam current chosen. In the 2002/2003 experiments reported here, a 6 Li glass detector was employed to determine the absolute beam current and to calibrate the 3 He transmission beam monitor. In addition, activation measurements of gold foils were carried out at a reduced beam divergence. The results agree within ±2%. Furthermore, the beam is characterized by a low gamma background intensity and a negligible fraction of epithermal neutrons. Irradiations in combination with a scanner device to achieve a homogeneously illuminated scan field have shown that the thermal beam is well suited for dosemeter development and for the calibration of radiation protection instruments. (orig.)

In-pile creep behaviour of Zry-4 and ZrNb3Sn1 cladding under uniaxial and biaxial stress

International Nuclear Information System (INIS)

Boehner, G.; Wildhagen, B.; Wilhelm, H.

1987-01-01

An irradiation programme - started in 1977 - was performed at the research reactor FRG-2 at Geesthacht, Germany, as a joint project of GKSS and KWU in order to study the in-pile creep behaviour of zirconium alloy cladding tubes of PWR fuel rods. The test objective was to establish a data base which allows refined modelling of the in-pile creep phenomenon. A wide test matrix was realized in which each of the precisely monitored test conditions (hoop stress, temperature, fast neutron flux) was varied separately. Different cladding materials (Zircaloy-4 and Zirconium-Niob-Tin alloy ZrNb3Sn1) were subjected to those varying test conditions. Cladding tube specimens of 10.75 mm outer diameter were irradiated in test capsules under various stress conditions and levels up to approx. 6000 h, at temperatures ranging from 300 0 C to 400 0 C and fast neutron flux (E > 1 MeV) of approx. 3x10 13 cm -2 .s -1 . Diametrical and/or axial creep deformation of all tubes were measured in the Hot Cells several times in the course of the tests. In order to extract the irradiation induced creep strain some out-pile experiments were carried out under the very same test conditions as the in-pile tests concerned. (orig./GL)

The PTB thermal neutron reference field at GeNF

Energy Technology Data Exchange (ETDEWEB)

Boettger, R.; Friedrich, H.; Janssen, H.

2004-07-01

The experimental setup and procedure for the characterization of the thermal neutron reference field established at the Geesthacht neutron facility (GeNF) of the GKSS is described. The neutron beam, free in air, with a maximum flux of 10{sup 6} s{sup -1}, can easily be reduced to less than 10{sup 4} s{sup -1} by using a diaphragm variable in size and without changing the beam divergence. Also, the spectral distribution with a mean energy of 45 meV, measured by time-of-flight over a 6.6 m long flight path, is independent of the beam current chosen. In the 2002/2003 experiments reported here, a {sup 6}Li glass detector was employed to determine the absolute beam current and to calibrate the {sup 3}He transmission beam monitor. In addition, activation measurements of gold foils were carried out at a reduced beam divergence. The results agree within {+-}2%. Furthermore, the beam is characterized by a low gamma background intensity and a negligible fraction of epithermal neutrons. Irradiations in combination with a scanner device to achieve a homogeneously illuminated scan field have shown that the thermal beam is well suited for dosemeter development and for the calibration of radiation protection instruments. (orig.)

Summary of the contributions to reactor safety research commissioned by the Republic of Austria and done by the Forschungszentrum Seibersdorf from 1987 to 1990

International Nuclear Information System (INIS)

Sonneck, G.; Sdouz, G.

1991-09-01

In 1987 the Forschungszentrum Seibersdorf was commissioned by the Republic of Austria with the collaboration in the Nuclear Safety Research Index, the OECD-LOFT-Programme and the International Coordinated Assessment and Application Programme (ICAAP). This report summarises the work done from 1987 to 1990, mainly in the field of thermal hydraulics, fuel rod behaviour and source term. Besides some analyses for experiments done in loops based on BWRs and PWRs of western design the work concentrated on safety researchs for WWERS. (Authors)

78 FR 66666 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2013-11-06

...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... Aircraft Industries GmbH has issued Mandatory Service Bulletin No. MSB 42NG-003/12; Mandatory Service... Accomplishment/ Instructions section of Diamond Aircraft Industries GmbH Mandatory Service Bulletin No. MSB 42NG...

78 FR 26241 - Airworthiness Directives; Diamond Aircraft Industries GmbH Powered Gliders

Science.gov (United States)

2013-05-06

... p.m., Monday through Friday, except Federal holidays. For service information identified in this AD... We reviewed Diamond Aircraft Industries GmbH Mandatory Service Bulletin MSB 36-108, dated February 28... Industries GmbH Mandatory Service Bulletin MSB 36-108 and Diamond Aircraft [[Page 26243

German repository engineering in international markets. DBE TECHNOLOGY GmbH success story

Energy Technology Data Exchange (ETDEWEB)

Berlepsch, Thilo v.; Krone, Juergen [DBE Technology GmbH, Peine (Germany); Biurrun, Enrique

2015-10-15

DBE TECHNOLOGY GmbH was founded in 2000 as a spin-off from the Technology and Development Division of DBE, the German Company for the Construction and Operation of Repositories for Wastes. Today, 15 years later, DBE TECHNOLOGY GmbH can draw upon a tremendous amount of experience and knowledge, which goes far beyond the planning and operation of Deep Geologic Repositories and the development of technologies for the disposal of radioactive waste. The capabilities of DBE TECHNOLOGY GmbH are presented by leading through its history, describing its roots and highlighting main projects the company has been involved in.

78 FR 52872 - Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft...

Science.gov (United States)

2013-08-27

... Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier... certain 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild... send any written relevant data, views, or arguments about this proposed AD. Send your comments to an...

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Bernhard, G [ed.

2005-07-01

The Institute of Radiochemistry (IRC), one of the six Institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Motivation and background of our research are environmental processes relevant for the installation of nuclear waste repositories, for remediation of uranium mining and milling sites, and for radioactive contaminations caused by nuclear accidents and fallout. Because of their high radiotoxicity and long half-life the actinides are of special interest. The research is focused on a better understanding of the chemical behavior of actinides in the environment on a molecular level. We will increase our efforts to study both the speciation of actinides on bio-molecular interfaces and their transport in bio-systems. Current topics of our research work are: aquatic chemistry of actinides, actinides in bio-systems, interaction of actinides with solid phases, Reactive transport of actinides. About 60 scientists, technicians and PhD students are employed at the Institute of Radiochemistry. We accomplished many new scientific results in the past year, which are presented in this annual report. Among them only few can be highlighted in this preface. Further progress was achieved in understanding the formation and characterization of uranium containing colloids. The newly installed method of laser-induced breakdown detection was very helpful for the identification of uranium colloids under anoxic conditions. We were very successful in the determination of formation pathways and structure of various actinide complexes. These results contribute to a better understanding of actinide speciation in geo- and bio-systems, especially with respect to the chemical processes on the interfaces. The results achieved in the characterization of the properties, modification, and interaction of the S-layers of Bacillus sphaericus with uranium and some other heavy metals strengthen our hope to use this

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2004

International Nuclear Information System (INIS)

Bernhard, G.

2005-01-01

The Institute of Radiochemistry (IRC), one of the six Institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Motivation and background of our research are environmental processes relevant for the installation of nuclear waste repositories, for remediation of uranium mining and milling sites, and for radioactive contaminations caused by nuclear accidents and fallout. Because of their high radiotoxicity and long half-life the actinides are of special interest. The research is focused on a better understanding of the chemical behavior of actinides in the environment on a molecular level. We will increase our efforts to study both the speciation of actinides on bio-molecular interfaces and their transport in bio-systems. Current topics of our research work are: aquatic chemistry of actinides, actinides in bio-systems, interaction of actinides with solid phases, Reactive transport of actinides. About 60 scientists, technicians and PhD students are employed at the Institute of Radiochemistry. We accomplished many new scientific results in the past year, which are presented in this annual report. Among them only few can be highlighted in this preface. Further progress was achieved in understanding the formation and characterization of uranium containing colloids. The newly installed method of laser-induced breakdown detection was very helpful for the identification of uranium colloids under anoxic conditions. We were very successful in the determination of formation pathways and structure of various actinide complexes. These results contribute to a better understanding of actinide speciation in geo- and bio-systems, especially with respect to the chemical processes on the interfaces. The results achieved in the characterization of the properties, modification, and interaction of the S-layers of Bacillus sphaericus with uranium and some other heavy metals strengthen our hope to use this

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2000

International Nuclear Information System (INIS)

2001-05-01

The Institute of Radiochemistry (IRC), one of the five institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Main goal is the quantification of the interaction and mobility of radionuclides in the geo- and biosphere. Because of their high radiotoxicity and long half-life the actinides are of special interest. Among the actinides uranium and its manifold interactions plays a major role in the institute's research activities. In addition the interactions of some important long-lived fission and decay products are studied. More than 60 scientists, technicians and PhD students are employed in the Institute of Radiochemistry. The research is focused on understanding the fundamental processes relevant for the behavior of radionuclides in the environment. Main topics are: Aquatic chemistry, Radionuclide interaction with mineral surfaces, Radionuclide interaction with biological materials (microbes and plants), Modeling the radionuclide transport, Development of spectroscopic speciation methods. Further progress was achieved in understanding the interaction mechanism of actinides with humic acids. The coordination numbers and bond distances of the coordinated oxygens have been determined by X-ray absorption spectroscopy for tetra- and pentavalent actinides (Np(IV) and Np(V)). It was shown that the carboxylic groups of the humic acid form monodentate complexes with the neptonyl ions. We extended our laser spectroscopic capabilities by installing a new laser system with ultra-short pulses (130 fs) for fluorescence measurements of organic substances. We intend to gain information on actinide complexes with organic ligands by studying the fluorescence properties of the organics with very short life times. The laser system and the method were successfully validated by the determination of the well-known uranyl-salicylic acid complexation. Although surface complexation concepts are more and more

77 FR 12450 - Airworthiness Directives; BRP-Powertrain GmbH & Co KG Rotax Reciprocating Engines

Science.gov (United States)

2012-03-01

.... (1) Inspect the oil pump and engine valve train for oil leaks in accordance with paragraph 3.1) step... paragraph 3.1.3) steps 19. through 21. of BRP- Powertrain GmbH & Co KG, Rotax Aircraft Engines Mandatory... Airworthiness Directives; BRP-Powertrain GmbH & Co KG Rotax Reciprocating Engines AGENCY: Federal Aviation...

Forschungszentrum Rossendorf. Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2002

Energy Technology Data Exchange (ETDEWEB)

Johannsen, B.; Seifert, S. (eds.)

2003-01-01

In 2002 the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Forschungszentrum Rossendorf e.V., continued and further developed its basic and application-oriented research. Research was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. While further pursuing and extending our chemical, biological and medical activities in the PET Centre and being engaged in the coordination chemistry and radiopharmacology of technetium, rhenium and other metals, new lines of activity have also been opened up recently. This involves bioactive substances as they are present in food. Such substances may cause a health risk or may exert effects not yet fully understood. New biotechnological procedures in food processing also give rise to new questions that can be addressed by PET. As illustrated by the majority of contributions in this report, the Institute is predominantly engaged in radiopharmaceutical chemistry of both radiometals and the PET nuclides carbon-11 and fluorine-18. The improvement of labelling methods continued to remain an area of considerable endeavour. The review article on radiochemistry with the short-lived positron emitters {sup 11}C and {sup 18}F is meant to emphasize this field of research and to help to classify our contribution to this area. As for the radiometals, our studies agree with the more and more demanding insight that the coordination has a not sufficiently predictable impact on the in vivo behaviour of the molecule into which the chelate unit is integrated. Therefore, attempts to better understand and adjust the in vivo behaviour of the radiotracers are being continued. In order to reflect on and identify trends and perspectives, the Institute organized on March 7-8, 2002, an international conference on advances and perspectives in radiotracer development. The Institute's chemically and radiopharmacologically

Forschungszentrum Rossendorf. Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2002

International Nuclear Information System (INIS)

Johannsen, B.; Seifert, S.

2003-01-01

In 2002 the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Forschungszentrum Rossendorf e.V., continued and further developed its basic and application-oriented research. Research was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. While further pursuing and extending our chemical, biological and medical activities in the PET Centre and being engaged in the coordination chemistry and radiopharmacology of technetium, rhenium and other metals, new lines of activity have also been opened up recently. This involves bioactive substances as they are present in food. Such substances may cause a health risk or may exert effects not yet fully understood. New biotechnological procedures in food processing also give rise to new questions that can be addressed by PET. As illustrated by the majority of contributions in this report, the Institute is predominantly engaged in radiopharmaceutical chemistry of both radiometals and the PET nuclides carbon-11 and fluorine-18. The improvement of labelling methods continued to remain an area of considerable endeavour. The review article on radiochemistry with the short-lived positron emitters 11 C and 18 F is meant to emphasize this field of research and to help to classify our contribution to this area. As for the radiometals, our studies agree with the more and more demanding insight that the coordination has a not sufficiently predictable impact on the in vivo behaviour of the molecule into which the chelate unit is integrated. Therefore, attempts to better understand and adjust the in vivo behaviour of the radiotracers are being continued. In order to reflect on and identify trends and perspectives, the Institute organized on March 7-8, 2002, an international conference on advances and perspectives in radiotracer development. The Institute's chemically and radiopharmacologically oriented activities

76 FR 37684 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model (Diamond) DA 40 Airplanes...

Science.gov (United States)

2011-06-28

... Industries GmbH Model (Diamond) DA 40 Airplanes Equipped With Certain Cabin Air Conditioning Systems AGENCY... inspections of the Diamond Model DA 40 airplanes equipped with a VCS installed per Premier Aircraft Service... GmbH Model (Diamond) DA 40 Airplanes Equipped With Certain Cabin Air Conditioning Systems: Docket No...

Conceptual design of a cold methane moderator system for the European Spallation Source (ESS)

CERN Document Server

Barnert-Wiemer, H

2002-01-01

As part of the work for the target station of the planned European spallation source (ESS) the Central Department of Technology at the Forschungszentrum Juelich GmbH is also concerned with the moderators, particular attention being given to the development of cold methane moderators. This report discusses the technical feasibility of solid methane moderators. Methods to tailor the neutron output by adding absorption materials (decouplers or poisons) are not considered here, neither are composite moderators. Based on the given target-moderator-reflector assembly of the ESS project a concept for the ESS cold methane moderators has been developed and is being examined at the Forschungszentrum Juelich. According to this moderator concept the moderator is a fixed bed of small spheres, which makes moderator container filling homogeneous and reproducible. Since spheres form a defined packed bed, cooling of the moderator bed by H sub 2 is reliable. The process of filling the moderator container and of removing the pe...

77 FR 35890 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2012-06-15

...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... Service Information Diamond Aircraft Industries GmbH has issued Mandatory Service Bulletin No. MSB 42-092...

75 FR 52292 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 40 and DA 40F Airplanes

Science.gov (United States)

2010-08-25

... Industries GmbH Models DA 40 and DA 40F Airplanes AGENCY: Federal Aviation Administration (FAA), Department... new airworthiness directive (AD) for all Diamond Aircraft Industries GmbH Models DA 40 and DA 40F... received information from Diamond Aircraft Industries GmbH that the Models DA 40 and DA 40F airplanes have...

77 FR 42958 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-07-23

... airworthiness directive (AD) for Eurocopter Deutschland GmbH (ECD) Model MBB-BK 117 (all versions) and BO-105LS... tail rotor pitch link and subsequent loss of control of the helicopter. DATES: This AD becomes... improperly swaged spherical bearing on the pitch link, which could result in loss of tail rotor control and...

Lippe-Ems GmbH nuclear power stations. Annual report 1992

International Nuclear Information System (INIS)

1993-01-01

The Nuclear power company Lippe-Ems GmbH (KLE) runs the Emsland Nuclear Power Station (KKE) in Lingen (Ems) with a 1300 MW pressurized Water reactor. Partners of KLE are VEW and Elektromark. This 1992 annual report reveals numerous financial data of the operator (balance sheet, profit and loss account.) (orig./UA) [de

10 years of sanitation work at Wismut GmbH

International Nuclear Information System (INIS)

Runge, W.

2001-01-01

Ten years after the work on uranium mines abandoned in 1990 was started, all sites of the Wismut GmbH report considerable progress. Of the 13 billion DM granted in 1991 by the German state, 6.7 had been spent by the end of 2000. DM 2.7 billion were spent in East Thuringia and DM 3 billion in Sayony. The work done in 2000 amounted to DM 485 million [de

Hochtemperatur-Kernkraftwerk GmbH (HKG). Annual report 1985

International Nuclear Information System (INIS)

1986-01-01

The annual report presents the agenda of the general meeting of members, held on July 3, 1986 at Hamm-Uentrop, the report of the managing board, and the annual financial statement as of December 31, 1985, including the profit and loss account of the period January 1 to December 31, 1985. The object of the HKG GmbH is the planning, financing, installation, and operation of the Hamm-Uentrop nuclear power station equipped with a high-temperature reactor, as a joint enterprise of the European partners. (UA) [de

77 FR 65503 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2012-10-29

... through Friday, except Federal holidays. For service information identified in this proposed AD, contact.... Prompted by the reported event, Diamond Aircraft Industries (DAI) published Recommended Service Bulletin... MCAI in the AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued the...

78 FR 16196 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-03-14

... directive (AD) for all Eurocopter Deutschland GmbH (ECD) EC 135 P1, P2, P2+, T1, T2, and T2+ helicopters..., except Federal holidays. The AD docket contains this proposed AD, the economic evaluation, any comments.... We prepared an economic evaluation of the estimated costs to comply with this proposed AD and placed...

DNS: Diffuse scattering neutron time-of-flight spectrometer

Directory of Open Access Journals (Sweden)

Yixi Su

2015-08-01

Full Text Available DNS is a versatile diffuse scattering instrument with polarisation analysis operated by the Jülich Centre for Neutron Science (JCNS, Forschungszentrum Jülich GmbH, outstation at the Heinz Maier-Leibnitz Zentrum (MLZ. Compact design, a large double-focusing PG monochromator and a highly efficient supermirror-based polarizer provide a polarized neutron flux of about 107 n cm-2 s-1. DNS is used for the studies of highly frustrated spin systems, strongly correlated electrons, emergent functional materials and soft condensed matter.

The Kerntechnischer Hilfsdienst GmbH and its facilities for emergency cases

International Nuclear Information System (INIS)

Neumann, W.

1979-01-01

Organisation of the KHG: Permanent staff, specialized staff, readiness for calling, readiness for transport, user contracts. Technical equipment: Radiation protection equipment, gas masks and breathing equipment, decontamination equipment, remote-controlled manipulator vehicles, radio equipment and image transmission. Tasks of the Kerntechnischer Hilfsdienst GmbH. (orig.) [de

77 FR 66409 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2012-11-05

...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... occupants. To address this concern, Diamond Aircraft Industries (DAI) published Mandatory Service Bulletin... MCAI in the AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued Diamond...

78 FR 22209 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-04-15

... GmbH (Eurocopter) Model EC135 P1, EC135 P2, EC135 P2+, EC135 T1, EC135 T2, EC135 T2+, and MBB-BK 117 C... holidays. The AD docket contains this proposed AD, the economic evaluation, any comments received, and... evaluation of the estimated costs to comply with this proposed AD and placed it in the AD docket. List of...

Karlsruhe Research Center, Nuclear Safety Research Project (PSF). Annual report 1994; Forschungszentrum Karlsruhe, Projekt Nukleare Sicherheitsforschung. Jahrsbericht 1994

Energy Technology Data Exchange (ETDEWEB)

Hueper, R. [ed.

1995-08-01

The reactor safety R and D work of the Karlsruhe Research Centre (FZKA) has been part of the Nuclear Safety Research Projet (PSF) since 1990. The present annual report 1994 summarizes the R and D results. The research tasks are coordinated in agreement with internal and external working groups. The contributions to this report correspond to the status of early 1995. An abstract in English precedes each of them, whenever the respective article is written in German. (orig.) [Deutsch] Seit Beginn 1990 sind die F+E-Arbeiten des Forschungszentrum Karlsruhe (FZKA) zur Reaktorsicherheit im Projekt Nukleare Sicherheitsforschung (PSF) zusammengefasst. Der vorliegende Jahresbericht 1994 enthaelt Beitraege zu aktuellen Fragen der Sicherheit von Leichtwasserreaktoren und innovativen Systemen sowie der Umwandlung von minoren Aktiniden. Die konkreten Forschungsthemen und -vorhaben werden mit internen und externen Fachgremien laufend abgestimmt. An den beschriebenen Arbeiten sind die folgenden Institute und Abteilungen des FZKA beteiligt: Institut fuer Materialforschung IMF I, II, III; Institut fuer Neutronenphysik und Reaktortechnik INR; Institut fuer Angewandte Thermo- und Fluiddynamik IATF; Institut fuer Reaktorsicherheit IRS; Hauptabteilung Ingenieurtechnik HIT; Hauptabteilung Versuchstechnik HVT sowie vom KfK beauftragte externe Institutionen. Die einzelnen Beitraege stellen den Stand der Arbeiten zum Fruehjahr 1995 dar und sind entsprechend dem F+E-Programm 1994 numeriert. Den in deutscher Sprache verfassten Beitraege sind Kurzfassungen in englischer Sprache vorangestellt. (orig.)

Business model analysis in asset management : the case JRS Finanzmandate Gmbh

OpenAIRE

Rogg, Christina

2016-01-01

This bachelor’s thesis was prepared to solve a current business case on behalf of JRS Finanzmandate GmbH, a German independent financial advisory and asset management company. The objectives of this thesis were to thoroughly examine the JRS business model, observe the competitive environment and detect future market opportunities. After identification of arising challenges, innovative approaches to achieve a competitive advantage within this niche industry were illustrated. Financ...

SAFIRA. Subproject B 3.1: reductive dechlorination of chloroaromatics by means of electrochemical methods and membrane-supported catalysts for in-situ treatment of contaminated groundwater. Final report; SAFIRA. Teilprojekt B 3.1: Reduktive Dechlorierung von Chloraromaten mit elektrochemischen Methoden und Membran-gestuetzten Katalysatoren zur in-situ-Behandlung von kontaminierten Grundwaessern. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Kopinke, F.D.; Mackenzie, K.; Koehler, R.; Battke, J.

2002-12-31

The objective of the sub-project was the development and experimental testing of a mainly passive, in situ technology for the abiotic dehalogenation of halogenated organic hydrocarbons (HOCs) within the aquifer. The technology to be developed should be applicable not only for aliphatic HOCs but also for dehalogenation of aromatic halogenated pollutants. During the first two years of the project, the main focus of our research was the development and testing of novel membrane-supported catalysts. The catalytically active component Pd was embedded in highly disperse form into non-porous silicone membranes in order to protect it from ionic catalyst poisons and erosion. At the laboratory scale, the novel catalysts proved their suitability for dehalogenation of various classes of HOCs within the water phase. The membrane-supported catalysts were developed in co-operation with a working group from the GKSS Geesthacht and their novelty was protected in a patent disclosure (DE 19952 732A1). Especially for their use under field conditions, membrane-supported Pd catalysts were produced as hollow fibres where the reaction partner hydrogen was fed from the interior of the fibres. Unfortunately, the high activity of these catalysts was not sustainable under Bitterfeld groundwater conditions - sulphur poisoning occurred due to non-ionic catalyst poisons situated in the aquifer and H{sub 2}S produced by sulphate-reducing bacteria. In order to enhance the catalyst stability and therefore their applicability in a scaled-up technology, our studies were then focused on the suppression of microbial activity and on catalyst regeneration. (orig.) [German] Das Ziel des Teilprojektes war die Entwicklung und experimentelle Pruefung eines weitgehend passiven, in-situ-tauglichen Verfahrens zur abiotischen Dehalogenierung von HKW im Aquifer, das auch auf halogenierte aromatische Verbindungen anwendbar ist. In den ersten zwei Jahren des Projektes stand die Entwicklung und Testung von Membran

An overview of the severe accident research activities within the LACOMERA platform at the Forschungszentrum Karlsruhe

International Nuclear Information System (INIS)

Miassoedov, A.; Alsmeyer, H.; Meyer, L.; Steinbrueck, M.; Tromm, W.

2006-01-01

The LACOMERA project at the Forschungszentrum Karlsruhe, Germany, is a 4 year action within the 5th Framework Programme of the EU which started in September 2002. Overall objective of the project is to offer research institutions from the EU member countries and associated states access to four large-scale experimental facilities QUENCH, LIVE, DISCO, and COMET. These facilities can be used to investigate core melt scenarios from the beginning of core degradation to melt formation and relocation in the vessel, possible melt dispersion to the reactor cavity, and finally corium concrete interaction and corium coolability in the reactor cavity. The paper summarises the main results obtained in the following experiments performed up to now. QUENCH-L1: Impact of air ingression on core degradation. The test provides unique data for the investigation of air ingress phenomenology in conditions as representative of a spent fuel pool accident as possible; QUENCH-L2: Boil-off of a flooded bundle. The test is of a generic interest for all reactor types, provided a link between the severe accident and design basis areas, and would deliver oxidation and thermal hydraulic data at high temperatures. DISCO-L1: Thermal hydraulic behaviour of the corium melt dispersion neglecting the chemical effects such as hydrogen generation and combustion. COMET-L1: Long-term 2D concrete ablation in a siliceous concrete cavity at intermediate decay heat power level with a top flooding phase after a phase of dry concrete erosion. COMET-L2: Investigation of long-term melt-concrete interaction of metallic corium in a cylindrical siliceous concrete cavity under dry conditions with decay heat simulation of intermediate power during the first test phase, and subsequently at reduced power during the second test phase. (author)

75 FR 71371 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Science.gov (United States)

2010-11-23

... Engines GmbH Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 Reciprocating Engines AGENCY: Federal... Engines GmbH models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 reciprocating engines installed in, but..., Operation & Maintenance Manual OM- 01-02, Issue 3, Revision 13. (ii) For TAE 125-02-99 and TAE 125-02-114...

76 FR 17757 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Science.gov (United States)

2011-03-31

... Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114.... Applicability (c) This AD applies to Thielert Aircraft Engines GmbH models TAE 125-01, TAE 125-02-99, and TAE...) For TAE 125-02-99 and TAE 125-02-114 engines, Operation & Maintenance Manual OM-02-02, Version 2...

Framatome ANP GmbH concept of Plant Life Management (PLIM)

International Nuclear Information System (INIS)

Daeuwel, W.; Biemann, W.; Danisch, R.; Kastner, B.; Meyer, W.; Nopper, H.; Waas, U.; Warnken, L.

2002-01-01

The deregulation of the power generation industry has resulted in increased competitive pressure and is forcing operators to improve plant operating economy while maintaining high levels of plant safety. A key factor to meeting this challenge is to apply a comprehensive plant life management (PLIM) approach which addresses all relevant ageing and degradation mechanisms regarding the safety concept, plant component structures and documentation, plant personnel, consumables, operations management system and administrative controls. For this reason, Framatome ANP GmbH has developed an integrated PLIM concept applicable for both new and operating plants and focusing on the safety concept, plant component structures and documentation. (orig.)

76 FR 31457 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Science.gov (United States)

2011-06-01

... Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation... reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance... DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance. Depending on...

76 FR 14346 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Science.gov (United States)

2011-03-16

... Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... been reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard... condition for the specified products. The MCAI states: Cracks have been reportedly found on DA 42 Main...

Die Energiewerke Nord GmbH. From operator of a decommissioned Russian nuclear power plant to one of Europe's leading decommissioning companies

International Nuclear Information System (INIS)

Philipp, Marlies

2011-01-01

EWN GmbH is a state-owned company with these duties: - decommissioning and demolition of the Greifswald and Rheinsberg nuclear power stations; - safe operation of the Zwischenlager Nord interim store; - development of the 'Lubminer Heide' industrial and commercial estate. Other projects for which EWN GmbH uses its know-how: - disposal of 120 decommissioned Russian nuclear submarines in Murmansk; - decommissioning and dismantling of the Juelich, NRW, AVR experimental reactor; - demolition of nuclear plants; running the Central Decontamination Operations Department at Karlsruhe, BW. Since 2008, EWN GmbH has held 25% of the shares of Deutsche Gesellschaft zum Bau- und Betrieb von Endlagern fuer Abfallstoffe mbH (DBE), a firm building and operating nuclear repositories. (orig.)

76 FR 54373 - Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines

Science.gov (United States)

2011-09-01

... diesel piston engines, with high-pressure (HP) fuel pump, part number (P/N) E4A- 30-100-000, installed... Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines AGENCY: Federal Aviation... pressure supply for excessive oscillations to determine if high-pressure (HP) fuel pumps have been exposed...

Effects of nitrogen and strain age embrittlement on toughness of MMA welds. A final report on the joint reserach project - GKSS Research Centre, Geesthacht, Germany, and Oerlikon Welding Ltd., Zurich, Switzerland

Energy Technology Data Exchange (ETDEWEB)

Kocak, M. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Materialforschung; Achar, D.R.G.; Evans, G.M. [OERLIKON Welding Ltd., Zurich (Switzerland)

1998-12-31

A detailed literature review has been carried out on the topic to identify the areas requiring further investigations. Based on this investigations have been carried out to evaluate the influence of dissolved nitrogen in weld metals on their toughness and strain aging behaviour through fracture mechanics as well as conventional impact testing approaches. MMA C-Mn steel weld metals bearing nitrogen between 80 to 210 ppm were investigated under four different post-weld conditions, namely: 1. as welded, 2. stress relieved, 3. artificially strain aged and 4. artificially strain aged and stress relieved. Quantitative metallography and low load microhardness studies of microphases were integral part of these investigations. The results demonstrate the highly detrimental effect of nitrogen on the toughness behaviour of C-Mn steel weld metal particularly under strain aging conditions. This is substantiated through decrease of acicular ferrite with the accompanying increase in primary ferrite and ferrite with second phases in the microstructures. Also, there is a distinctive increase in acicular ferrite microhardness. Post-weld stress relieving heat treatment under these conditions effects only marginal improvement in toughness and shifts the fracture behaviour from brittle to ductile or quasi-ductile only in the case of low nitrogen weld metals. Comparing the results of the CTOD and Charpy tests, it is observed that both methods measure the influence of nitrogen on toughness behaviour in the same trend but the magnitudes of the effect measured are different whereby the fracture mechanics method appears very conservative. (orig.) [Deutsch] Untersucht werden der Einfluss von Stickstoff im Bereich von 80-120 ppm auf die Zaehigkeit und Reckalterungsversproedungs-Verhaeltnisse des C-Mn-Strahlschweissgutes. Die Pruefungen erfolgen mit technologischen Kerbschlagbiege- und CTOD-Versuchen an Schweissguetern, die durch mehrlagiges Lichtbogenschweissen hergestellt wurden, unter vier Versuchsbedingungen. Die untersuchten Zustaende der Schweissgueter sind: 1. wie geschweisst (AW), 2. spannungsarmgeglueht (SR) - 580 C, 120 min., 3. reckgealtert (SA) - 10%-pre-Kompressionsdehnung und nachfolgende Alterung bei 250 C, 30 min, und 4. reckgealtert und nachfolgend spannungsarmgeglueht (SAS)-SA+SR. Die Beziehungen zwischen Stickstoffanteilen und Zaehigkeit bzw. Reckalterung sind durch mikrostrukturelle Aenderungen, Mikrohaerte der einzelnen Mikrophasen und bruchmechanische Parameter ausfuehrlich dargestellt. Die Untersuchungen zeigen die dominierende Rolle des Reckalterungsprozesses bei der Versproedung der Schweissgueter, besonders im Hinblick auf den Stickstoffgehalt und die ziemlich begrenzte Rolle des Spannungsarmgluehens bei solchen Faellen. (orig.)

75 FR 68179 - Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines

Science.gov (United States)

2010-11-05

... Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines AGENCY: Federal Aviation... pumps failed as a result of pressure oscillations in the fuel supply line. We are issuing this AD to.... Analyses have shown that high pressure (HP) fuel pumps failed as a result of pressure oscillations in the...

CFD simulation of hydrogen mixing and mitigation by means of passive auto-catalytic recombiners

International Nuclear Information System (INIS)

Kelm, S.; Reinecke, E-A.; Jahn, W.; Allelein, H-J.

2011-01-01

Modeling of passive auto-catalytic recombiners (PARs) operation in containment geometries involves a large variety of scales; thus, a CFD calculation resolving all these scales would be much too expensive. Therefore, the mechanistic PAR model REKO-DIREKT, developed at Forschungszentrum Juelich, has been coupled with the commercial CFD code ANSYS CFX in order to simulate PAR operation as well as the induced flow and transport phenomena. Based on a short introduction of REKO-DIREKT, its interface to CFX and the explicit coupling scheme is discussed. The paper is finalized by a first demonstration of simulation capabilities on the basis of the ThAI PAR-4 experiment (Becker Technologies GmbH, Eschborn, Germany). (author)

Cooperation of the private companies Groupe Intra and Kerntechnische Hilfsdienst GmbH

International Nuclear Information System (INIS)

Dumas, J.; Neumann, W.

1999-01-01

For supporting companies running nuclear power plants and for eliminating the effects of an accident, Kerntechnischer Hilfsdienst GmbH (KHG) was founded in Germany in 1977 whereas Groupe Intra (GIE) was founded in France 1988. Since the activities and responsibilities of the two companies are partly the same, they got into contact rather early, at that time with the intention to exchange experience. However, in 1993 the intensified contact resulted in signing an agreement on mutual assistance. In the following passage, a general idea is given of both organisations, the agreement on mutual assistance and the experience of cooperation they have had so far. (orig.) [de

Sales controlling comes into view. MIS (management information system) Deutschland GmbH fits energy suppliers; Vertriebscontrolling in Sicht. MIS Deutschland GmbH macht Energieversorger fit

Energy Technology Data Exchange (ETDEWEB)

Anon.

2002-03-01

MIS has integrated Microsoft-Excel efficiently, so appliers must not change other systems, can utilize advantages and know how and further functionalities like optimization of planning processes, automation of data processing, generation of a data base with structured information of energy data are available for customers.(GL) [German] Die MIS Deutschland GmbH wurde 1988 gegruendet. Die Gruender waren Studenten der Universitaet Darmstadt. Einer von ihnen ist noch heute Vorstandsvorsitzender der MIS AG. Schon damals hatte man die Vision, Manager oder die Entscheidungstraeger in Unternehmen mit Informationen zu versorgen und in die Lage zu versetzen, diese auch nach ihren Beduerfnissen auswerten, analysieren und reporten zu koennen. Dadurch entstand 1988 in Zusammenarbeit mit Microsoft die erste Microsoft-Excel-Konferenz in Deutschland. MIS hat Microsoft-Excel leistungsfaehig integriert, sodass der Anwender nicht auf ein anderes System umlernen muss, sondern die Vorteile und das Know-how Weiterverwenden kann und zusaetzlich weitere Funktionalitaeten zur Verfuegung gestellt bekommt. (orig.)

76 FR 54145 - Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft...

Science.gov (United States)

2011-08-31

... Services GmbH, Global Support Center, P.O. Box 1252, D-82231 Wessling, Federal Republic of Germany... of this AD introduce pre-flight operational tests of the warning system modification, along with abnormal procedures that provide guidance to the flightcrew in the event of various potential warning...

Forschungszentrum Juelich. Annual report 2012; Forschungszentrum Juelich. Jahresbericht 2012

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank; Roegener, Wiebke

2013-07-15

This annual report is structured as follows: 1 Highlight Energy Research (Next-generation batteries. Innovative material for the fuel cell. Smart material for solar cells. Store from midnight - Study on electromobility. Fuels from renewable electricity, carbon dioxide and water.). 2. Knowledge management (Create knowledge, pass knowledge, share knowledge and apply knowledge), and 3. Appendix (finance, boards and committees, organizational chart). [German] Dieser Jahresbericht ist wie folgt strukturiert: 1. Highlight Energieforschung (Batterien der naechsten Generation. Innovativer Werkstoff fuer die Brennstoffzelle. Smartes Material fuer Solarzellen. Laden ab Mitternacht - Studie zur Elektromobilitaet. Kraftstoffe aus Oekostrom, Kohlendioxid und Wasser). 2. Wissensmanagement (Wissen schaffen, Wissen weitergeben, Wissen teilen und Wissen anwenden) und 3. Anhang (Finanzen, Organe und Gremien, Organigramm).

Forschungszentrum Juelich. Annual report 2011; Forschungszentrum Juelich. Jahresbericht 2011

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank; Roegener, Wiebke

2012-07-15

The annual report presents ten primary scientific reports selected for information of the general reader, representing the research priorities, a survey of the research and development programmes, a list of research institutes, cooperation agreements for technology transfer, facts and figures showing the organizational structure, personnel employed, financing aspects, and aspects of the service departments.

Forschungszentrum Juelich. Annual report 2009; Forschungszentrum Juelich. Jahresbericht 2009

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank; Roegener, Wiebke; Stahl-Busse, Brigitte

2010-07-15

The annual report presents ten primary scientific reports selected for information of the general reader, representing the research priorities, a survey of the research and development programmes, a list of research institutes, cooperation agreements for technology transfer, facts and figures showing the organizational structure, personnel employed, financing aspects, and aspects of the service departments.

Forschungszentrum Juelich. Annual report 2008; Forschungszentrum Juelich. Jahresbericht 2008

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank; Roegener, Wiebke

2009-07-15

The following topics are dealt with: The precise lattice QCD mass calculation of protons and neutrons by means of the JUGENE supercomputer, the early diagnosis of morbus Alzheimer, the fabrication of vertebra-column implants consisting of porus titanium, software for the improvement of the spatial resolution in electron microscopy by means of aberration corrections. (HSI)

GKSS annual report 1981

International Nuclear Information System (INIS)

1982-01-01

As a part of our research- and development programme we employ at present about one half of our personnel and finances for work on the utilization of nuclear energy, especially for improving the safety of those plants, and the second half for work on the utilization of the sea and coasts, i.e. environmental research, desalination and underwater engineering. Our research- and development work is application-centered, i.e. while definining a task we keep our eyes upon future application of the results. The techniques and knowledge to be employed must comply with the latest state of scientific perceptions. This is why a proper part of our work has to be devoted to basic research, which deepens the knowledge in those branches of science that are necessary for our tasks. (orig./RW) [de

THE MARKET POTENTIAL FOR ELECTRONIC PAYMENT APPLICATIONS IN GHANA AND UGANDA. CASE COMPANY– MAVIANCE GMBH

OpenAIRE

Terekhova, Mariia

2016-01-01

Nowadays, electronic payment solutions are widespread all around the world. Besides, their popularity is rapidly growing in emerging markets bringing numerous business opportunities to the international companies specializing in electronic payment systems. The aim of this thesis is to create a marketing strategy for the penetration of Ghana and Uganda with Smobilpay, which is an electronic payment application of Maviance GmbH. The research is done with the help of an analysis of the busin...

Energy- and humidity-budget of the non-hydrostatic mesoscale model GESIMA by nesting into the regional climate model REMO; Energie- und Feuchtehaushalt im nichthydrostatischen Mesoskalamodell GESIMA bei Nestung in das Regionalklimamodell REMO

Energy Technology Data Exchange (ETDEWEB)

Horneffer, K. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Gewaesserphysik]|[Hamburg Univ. (Germany). Fachbereich 15 - Geowissenschaften

1997-12-31

The `Geesthacht Simulationsmodel of the Atmosphere` (GESIMA) was nested into the `Regional Climate Model` (REMO). Exemplary studies prove that the presented nesting scheme is suitable to resolve subscale phenomena in the regional climate model. Some results of simulations above the island Gotland in the Baltic Sea were presented. The mesoscale model GESIMA could now be used to analyze real synoptic weather situations. (orig.) [Deutsch] Das Geesthachter Simulationsmodell der Atmosphaere (GESIMA) wird in das Regionalklimamodell (REMO) genestet. Beispielhafte Untersuchungen zeigen, dass mit der genesteten Modellversion subskalige Effekte, die durch das grobe Raster des Regionalklimamodells fallen, aufgeloest werden. Dies wird anhand von Simulationen ueberprueft. Hauptuntersuchungsgegenstand ist die Insel Gotland in der Ostsee. Duch die Nestung kann das Mesoskalamodell fuer tatsaechliche synoptische Situationen eingesetzt werden. (orig.)

influence of intercritical annealing temperature on mechanical

African Journals Online (AJOL)

User

3 INSTITUTE OF MATERIALS RESEARCH, MATERIALS MECHANICS, HELMHOLTZ-ZENTRUM GEESTHACHT ZENTRUM FÜR ... They are also extensively used in making pipelines for the conveyance of natural gas and oil, where the.

Conceptual design of a cold methane moderator system for the European Spallation Source (ESS)

International Nuclear Information System (INIS)

Barnert-Wiemer, H.

2002-02-01

As part of the work for the target station of the planned European spallation source (ESS) the Central Department of Technology at the Forschungszentrum Juelich GmbH is also concerned with the moderators, particular attention being given to the development of cold methane moderators. This report discusses the technical feasibility of solid methane moderators. Methods to tailor the neutron output by adding absorption materials (decouplers or poisons) are not considered here, neither are composite moderators. Based on the given target-moderator-reflector assembly of the ESS project a concept for the ESS cold methane moderators has been developed and is being examined at the Forschungszentrum Juelich. According to this moderator concept the moderator is a fixed bed of small spheres, which makes moderator container filling homogeneous and reproducible. Since spheres form a defined packed bed, cooling of the moderator bed by H 2 is reliable. The process of filling the moderator container and of removing the pellets is batchwise to ensure complete removal of the pellets, so that no spent methane pellets accumulate in the system. For removal of the moderator spheres the fixed bed in the moderator container is fluidized with subsequent hydraulic transport of the pellets. The spent methane pellets are separated from the transport fluid and the methane is released over the stack or purified and reused. Depending on the kind and amount of the radioactive isotopes present these may have to be separated and stored. (orig.)

75 FR 75868 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 40 and DA 40F Airplanes

Science.gov (United States)

2010-12-07

... Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 40 and DA 40F Airplanes AGENCY: Federal... of the Thielert Engine Owners Group commented that the Model DA 42 has the same door design and the same unsafe condition. He recommended that the AD also apply to the Model DA 42. The FAA has discussed...

The Only Way Is Up? Match Outcome And Stock Price Reactions Of Borussia Dortmund GmbH & Co. KGaA

DEFF Research Database (Denmark)

Stadtmann, Georg; Ruelke, Jan Christoph

2008-01-01

We use stock market data for Borussia Dortmund GmbH & Co. KGaA - one of the leading German football clubs - for an application of the news model. Due to the specific characteristics of the news generating process, the case of a publicly traded sport club is a very appropriate candidate for testing...

Logistics worldwide for the whole nuclear cycle. Nuclear Cargo + Service GmbH

International Nuclear Information System (INIS)

Geiger, Horst; Schymke, Klaus

2011-01-01

Nuclear Cargo + Service GmbH (NCS) offers logistics worldwide for the whole nuclear cycle to fuel manufacturers, reactor operators, and waste management companies. Transport equipment and interim stores are part of the company's facilities. The firm's Front End unit conducts transnational transports of yellow cake, uranium hexafluoride, and enriched uranium and uranium from reprocessing. In the Back End unit, the company performs worldwide transports of spent fuel elements of research reactors. Another key area of activity is shipment of radioactive waste ranging from low-level waste to HAW (highly active waste generating heat). In its Component Disposal area, NCS offers a variety of transport services up to and including large components, e.g. reactor pressure vessels, both on the road and by rail and ship. NCS operates storage halls of its own for storing radioactive materials including radioactive waste. The technical equipment of NCS comprises a large pool of road and rail transport vehicles as well as a great number of vessels for radioactive materials. (orig.)

75 FR 7996 - Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02...

Science.gov (United States)

2010-02-23

... Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02-99 Reciprocating Engines Installed in, But Not Limited...-99 engines, initial and repetitive replacements of the PPRV, and installation of a vibration isolator..., we estimate that this proposed AD would affect about 300 TAE 125-01 and TAE 125-02-99 reciprocating...

The GKSS cold neutron source

International Nuclear Information System (INIS)

Knop, W.; Wedderien, T.; Krull, W.

1995-01-01

The FRG-1 research reactor, in operation since 1958 at 5 MW power, is upgraded and refurbished many times to follow the changing demands on safe operation and the today needs for scientific research. This requires during the lifetime of the reactor many measures to follow these demands. Within the last years many additional activities have been made to overcome the ageing of the experiments, to change the experimental facilities and to increase the neutron flux and adapt the neutron spectrum to ensure good scientific utilization of the research reactor for the next 15 to 20 years. (orig./HP)

BMFT. Partial programme ocean research. Annual report 1991

International Nuclear Information System (INIS)

1992-01-01

The project sponsors 'Biology, energy, ecology' and 'Materials and raw materials research' at Forschungszentrum Juelich GmbH were charged by the Federal Ministry for Research and Technology with the supervision of the promotion of the 'Marine research' subprogram. A summary is given of marine research programs promoted in 1991. These programs covered marine pollution analysis and monitoring (research and development), marine biology (research into marine ecosystems), marine research equipment and methods, maritime meteorology (research into maritime climates), new and unconventional marine nutrition sources (aquaculture), investigation of biological and technological aspects relevant to fishery, international cooperation and marine geosciences. A general survey is given of the promoted projects, and the individual activities are briefly described on standardized data sheets. The appendix gives project and joint-project indices and a list of firms and companies. (orig./BBR) [de

76 FR 64285 - Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-02-99 and TAE 125...

Science.gov (United States)

2011-10-18

... Engines GmbH (TAE) Models TAE 125-02-99 and TAE 125-01 Reciprocating Engines AGENCY: Federal Aviation... substance. But we have found it necessary to reduce the initial compliance time for TAE 125-02-99 engines... about 370 TAE 125-01 and TAE 125-02-99 reciprocating engines installed on products of U.S. registry. We...

77 FR 57041 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Science.gov (United States)

2012-09-17

... Engines GmbH Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 Reciprocating Engines AGENCY: Federal... Models TAE 125-01, TAE 125-02-99, and TAE 125-02-114 Reciprocating Engines. The existing AD currently... TAE 125-01, TAE 125-02-99, and TAE 125-02-114 reciprocating engines installed in, but not limited to...

First Ph.D. Student Workshop of the Hermann von Helmholtz Association of National Research Centers (HGF) on ''Nuclear Safety Research''

International Nuclear Information System (INIS)

Knebel, J.U.; Sanchez Espinoza, V.H.

2006-03-01

The First Ph.D. Student Workshop ''Nuclear Safety Research'' of the Helmholtz Association of National Research Centers (HGF)'' was jointly organized by the Research Center Karlsruhe GmbH and the Energie Baden-Wuerttemberg AG (EnBW) from Wednesday 9th to Friday 11th March 2005. The workshop was opened with welcome greetings by Dr. Peter Fritz, Forschungszentrum Karlsruhe. Subsequently Dr. Joachim U. Knebel explained the main goals and the content of the workshop. The young scientists reported in 28 high-level presentations about their research work which covered a wide spectrum from reactor safety, partitions and transmutation, and innovative reactor systems, to safety research for nuclear waste disposal. The junior researchs showed excellent professional competence and demonstrated presentation qualities at the highest level. The successful funding of two Virtual Institutes, namely: the ''Competence in Nuclear Technologies'' and ''Functional Characteristics of Aquatic Interfaces both co-ordinated by Forschungszentrum Karlsruhe'', by the President of the Helmholtz Association Prof. Walter Kroell was the motivation for the organization of this first Ph.D. Student Workshop. Thanks to these two Virtual Institutes, the Reseach Center Karlsruhe and Juelich together with several univer-sities i.e. RWTH Aachen, Heidelberg, Karlsruhe, Muenster, and Stuttgart, have successfully financed eight Ph.D. and two post-doctoral students. Moreover, young scientists of the European Institute for Transuranium Elements (ITU) and additional seven Ph.D. Students, who are sponsored by the German nuclear industry (Framatome ANP, RWE Power, EnBW) in the frame of the Alliance Competence in on Nuclear Technology, and who are trained at Forschungszentrum Karlsruhe, actively contributed to this workshop. The EnBW-Award was handed over by Dr. Hans-Josef Zimmer, member of the board of directors of the EnBW-Kraftwerksgesellschaft, to Mrs. Ayelet Walter from the University of Stuttgart for the best

76 FR 9963 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-02-99 and TAE 125-02-114...

Science.gov (United States)

2011-02-23

... Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-02-99 and TAE 125-02-114 Reciprocating... TAE 125-02-99 and TAE 125-02-114 reciprocating engines installed in, but not limited to, Cessna 172... occurs later. Repetitive Replacements of Timing Chains for All TAE 125-02-99 and TAE 125-02-114 Engines...

Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plan and build wet decontamination plant for disposal of components of Russian nuclear submarines; Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plant und errichtet eine Nassdekontaminationsanlage zur Entsorgung von Komponenten russischer Atom U-Boote

Energy Technology Data Exchange (ETDEWEB)

Schneider, Jan; Konitzer, Arnold; Luedeke, Michael [AKB Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH (Germany)

2010-05-15

Anlagen- und Kraftwerksrohrleitungsbau Greifswald, on behalf of Energiewerke Nord GmbH, Lubmin, plan and build a wet decontamination facility for the waste management center at Saida Bay, Russia (EZS). The plant is part of a large project with a total volume on the order of 3-digit millions funded by the German Federal Ministry for Economics and Technology. This project involves construction at Saida Bay near the port city of Murmansk of a complete waste management center and a long-term interim store for radioactively contaminated components. These components are mainly parts of decommissioned nuclear vessels and submarines whose metals, after decontamination, can be returned to economic use. The basis of the wet decontamination plant is a former AKB project for disposal and re-use of contaminated metal components of Energiewerke Nord GmbH at Lubmin, which is being adapted and developed further. The plant is to allow unrestricted re-use of the metals after surface cleaning and surface abrasion, respectively. For this purpose, the contaminated layer is removed far enough for the clearance limits under the Radiation Protection Ordinance to be met. A large fraction of the metals can be re-used after cleaning and do not have to be stored in a financially and logistically expensive process. The contract gives AKB an excellent opportunity to demonstrate its capabilities in plant construction, especially in the very sensitive area of disposal of radioactively contaminated objects. (orig.)

Compensation strategies for PET scanners with unconventional scanner geometry

CERN Document Server

Gundlich, B; Oehler, M

2006-01-01

The small animal PET scanner ClearPET®Neuro, developed at the Forschungszentrum Julich GmbH in cooperation with the Crystal Clear Collaboration (CERN), represents scanners with an unconventional geometry: due to axial and transaxial detector gaps ClearPet®Neuro delivers inhomogeneous sinograms with missing data. When filtered backprojection (FBP) or Fourier rebinning (FORE) are applied, strong geometrical artifacts appear in the images. In this contribution we present a method that takes the geometrical sensitivity into account and converts the measured sinograms into homogeneous and complete data. By this means artifactfree images are achieved using FBP or FORE. Besides an advantageous measurement setup that reduces inhomogeneities and data gaps in the sinograms, a modification of the measured sinograms is necessary. This modification includes two steps: a geometrical normalization and corrections for missing data. To normalize the measured sinograms, computed sinograms are used that describe the geometric...

76 FR 27861 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG...

Science.gov (United States)

2011-05-13

... Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG Airplanes... on Diamond aeroplanes, the majority of which were DA 40. In additional, at least 18 doors have been... conditions) while the aeroplane was parked. All DA 40 and DA 42 aeroplanes have a system installed that...

Annual report 1972

International Nuclear Information System (INIS)

1972-01-01

The report deals with the development of Geesthacht research centre, the research facilities (NS 'Otto Hahn', FRG-1 and FRG-2, ANEX), research and development projects, cooperation with industry and other research facilities, as well as with publications and lectures of 1972. (orig./AK) [de

76 FR 12627 - Airworthiness Directives; Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG...

Science.gov (United States)

2011-03-08

... Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG Airplanes AGENCY: Federal Aviation Administration (FAA... on Diamond aeroplanes, the majority of which were DA 40. In additional, at least 18 doors have been... conditions) while the aeroplane was parked. All DA 40 and DA 42 aeroplanes have a system installed that...

Recent progress in the LACOMERA Project (Large-Scale Experiments on Core Degradation, Melt Retention and Coolability) at the Forschungszentrum Karslruhe

International Nuclear Information System (INIS)

Miassoedov, A.; Alsmeyer, H.; Eppinger, B.; Meyer, L.; Steinbrueck, M.

2004-01-01

The LACOMERA Project at the Forschungszentrum Karlsruhe (FZK) is a 3 year action within the 5 th Framework Programme of the EU. The overall objective of the project is to offer research institutions from the EU member countries and associated states access to four large-scale experimental facilities QUENCH, LIVE, DISCO-H, and COMET which can be used to investigate core melt scenarios from the beginning of core degradation to melt formation and relocation in the vessel, possible melt dispersion to the reactor cavity, and finally corium concrete interaction and corium coolability in the reactor cavity. As a result of two calls for proposals, seven organisations from four countries are expected to profit from the LACOMERA Project participating in preparation, conduct and analysis of the following experiments: QUENCH-L1: Air ingression impact on core degradation. The test has provided unique data for the investigation of air ingress phenomenology in conditions as representative as possible of the reactor case regarding the source term. QUENCH-L2: Boil-off of a flooded bundle. The test will be of a generic interest for all reactor types, providing a link between the severe accident and design basis areas, and would deliver oxidation and thermal hydraulic data at high temperatures. LIVE-L1: Simulation of melt relocation into the Reactor Pressure Vessel (RPV) lower head for VVER conditions. The experiment will provide important information on the melt pool behaviour during the stages of air circulation at the outer RPV surface with a subsequent flooding of the lower head. LIVE-L2: Transient corium spreading and its impact on the heat fluxes to the RPV wall and on the final shape of the melt in the RPV lower head. The test will address the questions of melt stabilisation and the effects of crust formation near the RPV wall for a nonsymmetrical melt pool shape. COMET-L1: Long-term 2D concrete ablation in siliceous concrete cavity at intermediate decay heat power level with

Hydrogen from methanol for fuel cells in mobile systems: development of a compact reformer

Energy Technology Data Exchange (ETDEWEB)

Hoehlein, B [Forschungszentrum Juelich GmbH (Germany); Boe, M [H. Topsoee A/S, Lyngby (Denmark); Boegild-Hansen, J [H. Topsoee A/S, Lyngby (Denmark); Broeckerhoff, P [Forschungszentrum Juelich GmbH (Germany); Colsman, G [Forschungszentrum Juelich GmbH (Germany); Emonts, B [Forschungszentrum Juelich GmbH (Germany); Menzer, R [Forschungszentrum Juelich GmbH (Germany); Riedel, E

1996-07-01

On-board generation of hydrogen from methanol with a reformer in connection with the use of a proton-exchange membrane fuel cell (PEMFC) is an attractive option for a passenger car drive. Special considerations are required to obtain low weight and volume. Furthermore, the PEMFC of today cannot tolerate more than 10 ppm of carbon monoxide in the fuel. Therefore a gas conditioning step is needed after the methanol reformer. Our main research activities focus on the conceptual design of a drive system for a passenger car with methanol reformer and PEMFC: Engineering studies with regard to different aspects of this design including reformer, catalytic burner, gas conditioning, balances of the fuel cycles and basic design of a compact methanol reformer. The work described here was carried out within the framework of a JOULE II project of the European Union (1993-1995). Extensive experimental studies have been carried out at the Forschungszentrum Juelich GmbH (KFA) in Germany and at Haldor Topsoee A/S in Denmark. (orig.)

Annual report 1995 of the Central Safety Department, Research Center Karlsruhe

International Nuclear Information System (INIS)

Koelzer, W.

1996-04-01

The Central Safety Department is responsible for supervising, monitoring and, to some extent, also executing measures of radiation protection, industrial health and safety as well as physical protection and security at and for the institutes and departments of the Karlsruhe Research Center (Forschungszentrum Karlsruhe GmbH), and for monitoring liquid effluents and the environment of all facilities and nuclear installations on the premises of the Research Center. In addition, research and development work is carried out in the fields of behavior of tritium in the air/soil/plant system, tritium balances for nuclear fusion fuel cycles, and assessments of mining and ore dressing spoils. This report gives details of the different duties and reports the results of 1995 routine tasks, investigations and developments of the working groups of the Department. The reader is referred to the English translation of Chapter 1 describing the duties and organization of the Central Safety Department. (orig.) [de

Intermetallic alloys: Deformation, mechanical and fracture behaviour

International Nuclear Information System (INIS)

Dogan, B.

1988-01-01

The state of the art in intermetallic alloys development with particular emphasis on deformation, mechanical and fracture behaviour is documented. This review paper is prepared to lay the ground stones for a future work on mechanical property characterization and fracture behaviour of intermetallic alloys at GKSS. (orig.)

Description of steam-condensation phenomena during the loss-of-coolant accident

International Nuclear Information System (INIS)

McCauley, E.W.; Holman, G.S.; Aust, E.; Schwan, H.; Vollbrandt, J.; Fuerst, H.

1980-01-01

The development and verification of advanced computer models which describe the boiling water reactor (BWR) pressure suppression process for a hypothetical loss-of-coolant accident (LOCA) require a clear description of basic steam condensation phenomena. The GKSS Research Center, in coordination with interested institutions of West Germany and the United States, is currently conducting a test program for such basic research on a multivent BWR-related pressure suppression system. The Lawrence Livermore National Laboratory (LLNL) acts as the principal US NRC liaison for this test program, with particular emphasis on development of GKSS data for confirmatory use regarding US Mark II nuclear power plants as well as to advanced code development. The multivent test facility, placed in operation in February 1979, is a three-pipe full-scale vent system modelling main features of both the West German KWU and United States G.E. Mk II BWR pressure suppression systems. The test facility and testing programs are described

Dynamically polarized hydrogen target as a broadband, wavelength-independent thermal neutron spin polarizer

International Nuclear Information System (INIS)

Zhao Jinkui; Garamus, Vasil M.; Mueller, Wilhelm; Willumeit, Regine

2005-01-01

A hydrogen-rich sample with dynamically polarized hydrogen nuclei was tested as a wavelength-independent neutron transmission spin polarizer. The experiment used a modified setup of the dynamic nuclear polarization target station at the GKSS research center. The standard solvent sample at the GKSS DNP station was used. It is 2.8mm thick and consists of 43.4wt% water, 54.6wt% glycerol, and 2wt% of EHBA-Cr(v) complex. The wavelength of the incident neutrons for the transmission experiment was λ=8.1A with Δλ/λ=10%. The polarization of neutron beam after the target sample was analyzed with a supermirror analyzer. A neutron polarization of -52% was achieved at the hydrogen polarization of -69%. Further experiments will test the feasibility of other hydrogen-rich materials, such as methane, as the polarizer. A theoretical calculation shows that a polarized methane target would allow over 95% neutron polarizations with more than 30% transmission

Introduction of a quality management system at the Gemeinschaftskernkraftwerk Neckar GMBH (GKN)

International Nuclear Information System (INIS)

Haug, W.; Graeber, U.

1997-01-01

In the course of commissioning unit II of the GKN nuclear power plant, a Quality Assurance Manual was introduced in 1988. The Quality Assurance Manual is essentially based on the quality assurance elements of KTA 1401; that is, the emphasis is on quality assurance procedures for safety relevant plant components. During the actual application of the Quality Assurance Manual, however, it soon became apparent that this one-dimensional approach to quality management is not sufficient for the efficient organization of the quality related operational processes and procedures. The management of GKN decided at the end of 1992 to carry out a revision of the Quality Assurance Manual, with the objective of using quality, within the meaning of DIN ISO 9001, as a comprehensive organizational element for all operational processes and procedures. BTB-Jansky GmbH, a consulting firm familiar with the operational processes and procedures was commissioned to revise the Quality Assurance Manual, to investigate the procedures and implement a quality management system. The introduction of the quality management system has made it possible for the quality relevant processes and procedures at GKN to be regulated comprehensively and in a systematically transparent and workable manner. The introduction of the quality management system took place within the framework of an efficiency raising programme. It becomes apparent from this that the introduction of a quality management system is able to provide economic benefits for the operator. (orig.)

Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plan and build wet decontamination plant for disposal of components of Russian nuclear submarines

International Nuclear Information System (INIS)

Schneider, Jan; Konitzer, Arnold; Luedeke, Michael

2010-01-01

Anlagen- und Kraftwerksrohrleitungsbau Greifswald, on behalf of Energiewerke Nord GmbH, Lubmin, plan and build a wet decontamination facility for the waste management center at Saida Bay, Russia (EZS). The plant is part of a large project with a total volume on the order of 3-digit millions funded by the German Federal Ministry for Economics and Technology. This project involves construction at Saida Bay near the port city of Murmansk of a complete waste management center and a long-term interim store for radioactively contaminated components. These components are mainly parts of decommissioned nuclear vessels and submarines whose metals, after decontamination, can be returned to economic use. The basis of the wet decontamination plant is a former AKB project for disposal and re-use of contaminated metal components of Energiewerke Nord GmbH at Lubmin, which is being adapted and developed further. The plant is to allow unrestricted re-use of the metals after surface cleaning and surface abrasion, respectively. For this purpose, the contaminated layer is removed far enough for the clearance limits under the Radiation Protection Ordinance to be met. A large fraction of the metals can be re-used after cleaning and do not have to be stored in a financially and logistically expensive process. The contract gives AKB an excellent opportunity to demonstrate its capabilities in plant construction, especially in the very sensitive area of disposal of radioactively contaminated objects. (orig.)

35. Conference of the DVM Working Group on Fracture Processes: Advances in fracture and damage mechanics - simulation methods of fracture mechanics

International Nuclear Information System (INIS)

2003-01-01

Subjects of the meeting were: Simulation of fatigue crack growth in real strucures using FEA (M. Fulland, Paderborn); Modelling of ductile crack growth (W. Brocks, Geesthacht); Advances in non-local modelling of ductile damage (F. Reusch et al., Berlin, Dortmund); Fracture mechanics of ceramics (D. Munz, Karlsruhe); From materials testing to vehicle crash testing (J.G. Blauel, Freiburg); Analytical simulation of crack growth in thin-walled structures (U. Zerbst, Geesthacht); The influence of intrinsic stresses on fatigue crack growth (C. Dalle Donne etc., Cologne, Dortmund, Pisa, and M. Sander, Paderborn); Fracture mechanical strength calculation in case of mixed mode loads on cracks (H.A. Richard, Paderborn); Numeric simulation of intrinsic stresses during welding (C. Veneziano, Freiburg); New research fields of the Fraunhofer-Institut fuer Werkstoffmechanik (P. Gumbsch, Head of the Institute, Freiburg); Modern developments and advances in fracture and damage mechanics; Numeric and experimental simulation of crack propagation and damage processes; Exemplary damage cases; Fracture mechanics in product development; Failure characteristics of lightweight constructional materials and joints [de

Materials specific work at Forschungszentrum Karlsruhe and in cooperation with the industrial partners ALKEM and Interatom for the development of nuclear oxide fuels for fission reactors

International Nuclear Information System (INIS)

Kleykamp, H.; Muehling, G.

2005-09-01

The fabrication of uranium-plutonium oxide fuel started in Forschungszentrum Karlsruhe and at ALKEM company to begin for the criticality experiments in the SNEAK reactor and subsequently for stationary fuel pin irradiations in the FR2, BR2, DFR, Rapsodie, Phenix and KNK II reactors. The production methods comprised first the mechanical blending of UO2 and PuO2 followed by direct pressing and sintering of the pellets, later the advanced methods such as optimized comilling and ammonium uranyl plutonyl coprecititation. The fabrication of pellets was described in the main, further the alternative fuel pin manufacturing processes by vibrational compaction and hot-impact densification were discussed. The first capsule and pin irradiations in the FR2 and BR2 reactors contributed to the assessment of the maximum operation parameters within the fuel pin development such as linear heat rating, cladding temperature and burnup. Subsequently, small-bundle and largebundle irradiations were made in fast reactors in cooperation with Interatom company in order to verify the specifications for the commercial fast reactor SNR 300. Milestones were the maximum burnup of 175 GWd/t metal, corresponding 18.6 % of the heavy atoms, obtained in one of the KNK II fuel pin assemblies, and the displacement rates in the cladding materials of 140 dpa NRT attained in the Phenix reactor. Higher implications gained later the stationary irradiations of defected mixed-oxide pins, the mild fuel pin transient operations, the local blockage experiments and the severe hypothetic accidents in the respective Siloe, HFR, BR2 and CABRI reactors. These experiments were made solely in international partnership. Further activities were the chemical analyses of solid residues and coprecipitations of irradiated mixed-oxide fuels in the head-end of the reprocessing. All these actions were coordinated in the then fast breeder project. Furthermore, irradiated fuels and fuel pins of other reactor types were

Data on research and technology marketing in 2000; Daten zum Forschungs- und Technologiemarketing 2000

Energy Technology Data Exchange (ETDEWEB)

Friehmelt, R.; Oberdorf, R.

2001-04-01

At Forschungszentrum Karlsruhe all ideas suited for cooperations or licenses or for the raising of third-party funds are stored in a know-how database run by the Technology Transfer and Marketing Department (TTM). At trade fairs, current licenses and cooperations desired and offered are pinned up on a board. In addition, approx. 6300 interested persons are informed about wishes and offers of licenses and cooperations five times per year. In the present report, the ideas of Forschungszentrum Karlsruhe are split up in accordance with the type of partner wanted, the technical field covered, their age, and the institutes involved. The numbers of contacts made on trade fairs are indicated. Inquiries regarding the TT information sheets have been counted and the contacts are evaluated. Furthermore, it is reported about the presence of technology offers in databases. Strategic actions, in particular market studies, were carried out for attractive topics in cooperation with partner companies. Finally, proposals for improvement shall be discussed. (orig.) [German] Von der Stabsabteilung Technologietransfer und Marketing (TTM) werden alle Ideen aus dem Forschungszentrum Karlsruhe, die fuer Kooperationen, Lizenzen oder zur Drittmitteleinwerbung geeignet sind, in einer Know-how-Datenbank gefuehrt. Die aktuellen Technologieangebote werden auf Messen ausgehaengt. Ausserdem werden fuenfmal jaehrlich Technologieangebote an einen Kreis von etwa 6300 Interessenten verschickt. Der Bericht schluesselt die Ideen des Forschungszentrums nach Art der gesuchten Partner, Fachgebieten, Alter und nach Instituten auf. Es werden die Zahlen der Messekontake angegeben. Zu den Technologieangeboten wurden die Ruecklaeufer gezaehlt und die Kontakte bewertet. Es folgen Angaben zur Praesenz der Technologieangebote des Forschungszentrums in Datenbanken. Zu attraktiven Themenbereichen wurden mit Unterstuetzung von Partnerfirmen strategische Aktionen durchgefuehrt, insbesondere Marktuntersuchungen. In

Annual report 1977

International Nuclear Information System (INIS)

1978-01-01

The GKSS (Society for the Utilization of Nuclear Energy in Shipbuilding and Nautics) gives in this annual report a comprehensive survey of the research and development efforts carried out and a survey on the organisation and its sociological position. More detailed and generally explicable presentations of selected spheres of research deal this year with solid combustible neutron poisons, water desalination systems, pollution at the Elbe-mouth, trace analysis with x-ray fluor essence, heat conduction in water and under-water systems. The research and development programme is, in comparison with previous years better understandable. The range of tasks, 'utilization of nuclear energy', especially covers projects on the field of reactor safety research which were comprised in one project and fully integrated in the reactor safety programme of the Fed. Ministry for Research and Technology. Furthermore, nuclear energy ship development and works concerning working material technology are being carried out, to a smaller extent. The project of a nuclear container ship which run over a period of 5 years, was finished in 1977. Profitability calculations show that nuclear trade ships can be used in a profitable way, when the oil price has increased three-fold. This might be the case in about 15-20 years. Further plans of the GKSS on the field of nuclear energy ship development take into account this result. The range of tasks 'utilization of the sea and the shores' was comprised in a frame programme and divided in the research, fields of environment technique, water desalination, resources, and sea technique. These works are, beside reactor safety research, the main range of works of the GKSS. (orig./HK) [de

The reduction of radioactive discharges from mine workings: rehabilitation results conducted by WISMUTH GmbH

International Nuclear Information System (INIS)

Knoch-Weber, J.

2002-01-01

With operations designed to rehabilitate uranium mining operations terminated in late 1990 running for ten years now, significant progress is evident at all sites of Wismut GmbH. Of the total of DM 13 billion earmarked by the federal authorities in 1991 for the implementation of this exceptionally large environmental restoration project, about DM 6.7 billion were spent by the end of 2000, and of this DM 3.7 billion for the remediation of sites located in Eastern Thuringia and DM 3 billion for sites located in Saxony. Safe shutdown of underground mine workings remains an essential remediation task at all former mining sites. Following international standard practices, the preferred option retained called for flooding of the underground workings, i.e. cessation of water pumping and filling of mine workings by the naturally rising ground water level. Filling and sealing of mines is aimed at achieving geomechanical stabilisation of the ground surface and at reducing and/or avoiding gaseous and aerosolised radioactive discharges into the environment as a source of mine-related public exposure. (orig.)

Forschungszentrum Juelich. Annual report 2008

International Nuclear Information System (INIS)

Frick, Frank; Roegener, Wiebke

2009-07-01

The following topics are dealt with: The precise lattice QCD mass calculation of protons and neutrons by means of the JUGENE supercomputer, the early diagnosis of morbus Alzheimer, the fabrication of vertebra-column implants consisting of porus titanium, software for the improvement of the spatial resolution in electron microscopy by means of aberration corrections. (HSI)

Non-destructive testing of high pressure fibre reinforced composites tubes by computed tomography

Energy Technology Data Exchange (ETDEWEB)

Klimek, L. [Qualitaetszentrum Dortmund (Germany); Monstadt, H.; Boedecker, T. [EFMT, Bochum (Germany)

1995-12-31

For new applications of fibre reinforced composites, new non-destructive testing methods are required which on the one hand can be used as a quality testing method and on the other hand as an in-service inspection method during the life of a product. Special attention should be paid to the defect sensitivity and to a detailed classification of visible defects. Defining a detectable standard, comparable investigations were carried out using the Ultra Fast Scanner which is located at the Entwicklungs- und Forschungszentrum fuer Mikrotherapie gGmbH (EFMT) and the industrial scanner of the Qualitaetszentrum Dortmund GmbH u. Co. KG (QZ-DO). The investigation object is a high pressure tube which is made up of three different diameter structures. There can be distinguished between three types of tube layers. Digital image processing has been used to get more information form measured data. We developed two different types of digital image filters: A SIGMA and a Contrast Sensitive Weights (CSW) image filter and made a comparative study. (orig./RHM)

GKSS-workshop: contaminated sludges. Treatment and utilization fine graned residues; GKSS-Workshop: Kontaminierte Schlaemme. Behandlung und Nutzungsmoeglichkeiten feinkoerniger Reststoffe

Energy Technology Data Exchange (ETDEWEB)

Alvermann, G.; Luther, G.; Niemeyer, B. [eds.] [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Zentralabteilung Technikum

2000-07-01

New regulations, such as the materials recycling act, soil protection act and unsolved problems related to the treatment of contaminated sludges, the utilisation of the gained products demand the development of innovative techniques for industrial, dredged or drilling sludges. The workshop offered a platform for intensive discussions between representatives of industry, research institutions, associations, and authorities. The main aim of the workshop was the presentation of fundamental background of sludge processing and advanced technical solutions. The available proceedings contain 21 lectures held on the workshop with the following ranges of topics of the sludge treatment: legislation, R and D-funding, technological bases, decontamination processes, dewatering and drying processes, recycling and immobilization. (orig.) [German] Neue Gesetze wie das Kreislaufwirtschafts- oder das Bundes-Bodenschutzgesetz und anstehende Probleme bei der Beseitigung belasteter Schlaemme - zum Beispiel Industrie-, Bohr- und Baggergutschlaemme - erfordern die Entwicklung innovativer Techniken zu ihrer Aufbereitung, Reinigung bzw. Verwertung. Der Workshop bot ein Formung zur intensiven Diskussion zwischen Industrie, Forschung, Verbaenden und Behoerden. Ziel war es, unterschiedliche Methoden der Schlammbehandlung zu eroertern, Loesungswege aufzuzeigen und Moeglichkeiten fuer Kooperationen zu erarbeiten. Der vorliegende Band enthaelt Beitraege der Referenten, die sich auf folgende Themenbereiche der Schlammbehandlung konzentrieren: juristische Aspekte, Foerdermoeglichkeiten, Grundlagen, Aufbereitung von Schlaemmen, Entwaesserung und Trocknung von Schlaemmen, Verwertung und Immobilisierung. (orig.)

Vibration phenomena in large scale pressure suppression tests

International Nuclear Information System (INIS)

Aust, E.; Boettcher, G.; Kolb, M.; Sattler, P.; Vollbrandt, J.

1982-01-01

Structure und fluid vibration phenomena (acceleration, strain; pressure, level) were observed during blow-down experiments simulating a LOCA in the GKSS full scale multivent pressure suppression test facility. The paper describes first the source related excitations during the two regimes of condensation oscillation and of chugging, and deals then with the response vibrations of the facility's wetwell. Modal analyses of the wetwell were run using excitation by hammer and by shaker in order to separate phenomena that are particular to the GKSS facility from more general ones, i.e. phenomena specific to the fluid related parameters of blowdown and to the geometry of the vent pipes only. The lowest periodicities at about 12 and 16 Hz stem from the vent acoustics. A frequency of about 36 to 38 Hz prominent during chugging seems to result from the lowest local models of two of the wetwell's walls when coupled by the wetwell pool. Further peaks found during blowdown in the spectra of signals at higher frequencies correspond to global vibration modes of the wetwell. (orig.)

EFAM ETM 97 - the ETM method for assessing the significance of crack-like defects in engineering structures, comprising the versions ETM 97/1 and ETM 97/2

Energy Technology Data Exchange (ETDEWEB)

Schwalbe, K.H.; Zerbst, U.; Kim, Y.J.; Brocks, W.; Cornec, A.; Heerens, J. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung; Amstutz, H. [Technische Univ. Darmstadt (Germany). Fachgebiet Werkstoffmechanik

1998-09-01

EFAM ETM 97 is a document of the GKSS Procedure `Engineering Flaw Assessment Method (EFAM)`. It describes methods for estimating the crack driving force for cracks in structural components in terms of the crack tip opening displacement, {delta}{sub 5}, and the J-integral. It consists of several modules covering particular application problems. Appendices to this document provide solutions for the stress intenstiy factor and the yield load, as well as informtion on transferability of fracture parameters and on the treatment of bi-axial and mixed mode loadings. A second assessment route is also given in an appendix. (orig.) [Deutsch] EFM ETM 97 ist ein Dokument der GKSS-Prozedur `Engineering Flaw Assessment Method (EFAM)`. Es beschreibt Methoden zur Abschaetzung der bruchmechanischen Beanspruchung fuer Risse in Bauteilen in Form der Rissspitzenverschiebung {delta}{sub 5} oder des J-Integrals. Es besteht aus mehreren Moduln fuer bestimmte Anwendungsprobleme. In Anhaengen werden Loesungen fuer den Spannungsintensitaetsfaktor und die Fliesslast, Informationen zur Uebertragbarkeit von Kennwerten und zur Behandlung von biaxialer und Mixed-Mode-Beanspruchung angeboten. Eine zweite Bewertungsroute ist in einem weiteren Anhang beschrieben. (orig.)

Research in Europe. Forschungszentrum Juelich. Annual report 2010; Forschen in Europa. Forschungszentrum Juelich. Jahresbericht 2010

Energy Technology Data Exchange (ETDEWEB)

Frick, Frank; Roegener, Wiebke; Stahl-Busse, Brigitte

2010-07-15

Following the newest chronicle from April 2010 to March 2011, the annual report presents four highlights as well as a lot of contributions on the knowledge management. The annex of this annual report shows the organizational structure, personnel employed, financial aspects, and the contact information.

Experimental and theoretical burnup investigations on model arrangements with solid burnable poisons

International Nuclear Information System (INIS)

Ahlf, J.; Anders, D.; Greim, L.; Knoth, J.; Kolb, M.; Mittelstaedt, B.; Mueller, A.; Schwenke, H.

1975-01-01

It is the scope of the two experiments here to improve the methods for computation and measurement as well as the experimental technique appropriate to predict the burnable poison rod burn-up with sufficient accuracy. In the first experiment two nine-rod bundles in a 3 x 3 arrangement are irradiated during several irradiation periods in the research reactor Geesthacht. Each bundle consists of eight outer rods containing fuel and one inner rod containing poison (B 10 or Cd 113). The burn-up of the fuel and the burnable poison is measured by non-destructive methods after each irradiation period and then compared with results of a burn-up calculation. In the second experiment two poison rods with different cadmium concentrations and one rod containing boron are irradiated during several irradiation periods in the research reactor Geesthacht. The burn-up is determined after each irradiation period by reactivity measurements and its result compared to computed effective absorption cross-sections of the rods by aid of a calibration curve. For both experiments the experimental and theoretical results for the poison burn-up are found to be within the error limits of the measurements. (orig.) [de

Experimental and theoretical investigations on solid burnable poison burnup of model arrangements

International Nuclear Information System (INIS)

Ahlf, J.; Anders, D.; Greim, L.; Knoth, J.; Kolb, M.; Mittelstaedt, B.; Mueller, A.; Schwenke, H.

1975-01-01

It is the scope of the two experiments reported here to improve the methods for computation and measurement as well as the experimental technique appropriate to predict the burnable poison rod burn-up with sufficient accuracy. In the first experiment two nine-rod bundles in a 3 x 3 arrangement are irradiated during several irradiation periods in the research reactor Geesthacht. Each bundle consists of eight outer rods containing fuel and one inner rod containing poison (B 10 or Cd 113). The burn-up of the fuel and the burnable poison is measured by non-destructive methods after each irradiation period and then compared with results of a burn-up calculation. In the second experiment two poison rods with different cadmium concentrations and one rod containing boron are irradiated during several irradiation periods in the research reactor Geesthacht. The burn-up is determined after each irradiation period by reactivity measurements and its result compared to computed effective absorption cross-sections of the rods by aid of a calibration curve. For both experiments the experimental and theoretical results for the poison burn-up are found to be within the error limits of the measurements. (orig.) [de

Residual stress analysis by neutron time-of-flight at a reactor source

International Nuclear Information System (INIS)

Priesmeyer, H.G.; Schroder, J.

1990-01-01

Non-destructive neutron diffractometry for stress analysis will be a powerful experimental tool in material science research performed at the GKSS 5 MW reactor FRG-1. Arguments which show the advantages of the time-of-flight method are given and a suitable high-resolution neutron-efficient type of spectrometer is introduced. First results derived from this method are presented

Putting out to sea

International Nuclear Information System (INIS)

1970-01-01

Reactor design generally has undergone development, and a considerable number of marine reactors have been built. It is now possible to say that it appears a sound technological basis exists for embarking on the design and construction of new ships particularly suited for nuclear propulsion, including large submerged tankers and cargo ships to serve special routes and to carry out special missions. But if nuclear power is to be widely used for ship propulsion much more work remains to be done - in relation both to technical aspects of reactor and ship design, and to the economics of nuclear propulsion, insurance, and the all-important question of ensuring safety. All this will require a great deal of international co-operation and agreement: a nuclear-powered cargo ship would be useless if it were not allowed to enter the ports it was intended to serve. A new symposium on nuclear ships is therefore to be held, in Hamburg from 10-15 May next year. The object of this meeting will be to review the current status of and projected developments in technical and economic aspects of nuclear ships, and the special problems associated with their safety regulation and liability. The symposium could not only provide an opportunity for exchange of the latest information in the field, but pave the way for faster development of nuclear ships in co-operation between countries which are interested in the possibilities they offer. This second symposium on nuclear ships is being organized by the IAEA, IMCO and the Government of the Federal Republic of Germany, in co-operation with the Studiengesellschaft zur Forderung der Kernenergieverwertung in Schiffbau und Schiffahrt e. V. (KEST), and the Gesellschaft fur Kernenergieverwertung in Schiffbau und Schiffahrt mbH (GKSS). The topics to be discussed include a review of national programmes and plans; special problems of nuclear ship design; criteria and special features for power reactors for nuclear ships; actual experience gained in

Use of meteorological information in the risk analysis of a mixed wind farm and solar

Science.gov (United States)

Mengelkamp, H.-T.; Bendel, D.

2010-09-01

Use of meteorological information in the risk analysis of a mixed wind farm and solar power plant portfolio H.-T. Mengelkamp*,** , D. Bendel** *GKSS Research Center Geesthacht GmbH **anemos Gesellschaft für Umweltmeteorologie mbH The renewable energy industry has rapidly developed during the last two decades and so have the needs for high quality comprehensive meteorological services. It is, however, only recently that international financial institutions bundle wind farms and solar power plants and offer shares in these aggregate portfolios. The monetary value of a mixed wind farm and solar power plant portfolio is determined by legal and technical aspects, the expected annual energy production of each wind farm and solar power plant and the associated uncertainty of the energy yield estimation or the investment risk. Building an aggregate portfolio will reduce the overall uncertainty through diversification in contrast to the single wind farm/solar power plant energy yield uncertainty. This is similar to equity funds based on a variety of companies or products. Meteorological aspects contribute to the diversification in various ways. There is the uncertainty in the estimation of the expected long-term mean energy production of the wind and solar power plants. Different components of uncertainty have to be considered depending on whether the power plant is already in operation or in the planning phase. The uncertainty related to a wind farm in the planning phase comprises the methodology of the wind potential estimation and the uncertainty of the site specific wind turbine power curve as well as the uncertainty of the wind farm effect calculation. The uncertainty related to a solar power plant in the pre-operational phase comprises the uncertainty of the radiation data base and that of the performance curve. The long-term mean annual energy yield of operational wind farms and solar power plants is estimated on the basis of the actual energy production and it

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2003; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2003

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M; Haury, H J; Goedde, M; Guldner, H; Kettembeil, S; Leser, B; Meyer-Streng, O [eds.

2004-07-01

The GSF develops scientific principles that provide the basis for protecting human health and the natural basis of life for the future. GSF health research focuses on the genetic and immunological basis of molecular protection and define and their dysfunction during disease development, and the identification of new factors that contribute to sickness or health. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2005; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2005

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M.; Haury, H.J.; Guldner, H.; Kettembeil, S.; Leser, B.; Offenberger, M.; Weiner, M. (eds.)

2006-07-01

The report for the year 2005 falls at a time of change in both the Scientific and Administrative Managing Directors of the GSF. Thus securing continuity of the projects was a priority for the sound development of the research centre. In recent years, research at the GSF has focused on the health of humans in their environment - recognition of risks for human health from environmental factors, elucidation of mechanisms of disease development, and development of concepts - in order to protect human health and the natural basis of life. Substantial resources were invested in genome research, including in the German Mouse Clinic, biomedical translational approaches were initiated, programme-oriented funding was introduced, and new pathways were established for the transfer of results into practice. The 'mid term' review confirmed both the direction and excellence. The scientific achievements of the GSF are presented in detail in the following report, which, as in previous years, is arranged according to the reports of the institutes. Further, GSF scientists ensure that the most recent research results can flow into guidelines and new legislation by participating in national and international advisory commissions. GSF scientists are members of the Commission on Radiological Protection of the Federal Environment Ministry, in the MAK commission of the German Research Foundation, and in the ICRP (International Commission on Radiological Protection), to name but a few, and also act as scientific advisors for policy in the areas of medicine and data processing. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2004; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2004

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M.; Haury, H.J.; Goedde, M.; Guldner, H.; Kettembeil, S.; Leser, B.; Meyer-Streng, O. (eds.)

2005-07-01

Recent years have been shaped by the introduction of programme-oriented funding. In 2004, we were able once again to focus on the real goal of the GSF, the performance of excellent research. The effects of fine particles, for example, are at the centre of public interest. This topic is not only of great importance for health, it also has a wide-reaching economic significance; we have only to think of filters for diesel engines. The GSF was involved in many scientific successes. For example, the results on the economic costs of smoking received considerable attention from both the general public and the scientific world. GSF scientists were involved in the decoding of the chicken genome and the discovery of a Parkinson gene. Together with university and other research organisations, they founded a Virtual Institute on Biotic Interactions, and took part in an international project on the development of combination vaccines against HIV. The setting up of the GSF 'glass laboratory', which was created with substantial support form the Helmholtz Association, is particularly worthy of mention. GSF scientists have been awarded various prizes, for example the Felix Wankel Prize awarded to Professor Jean-Marie Buerstedde. The Bavarian Advancement of Women Prize 2004, which distinguished exemplary initiatives in the area of family and women's advancement, was a special honour. Professor Magdalena Goetz was appointed Director of the Institute for Stem Cell Research. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2005; GSF - Forschungszentrum fuer Umwelt und Gesundheit. Jahresbericht 2005

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, M; Haury, H J; Guldner, H; Kettembeil, S; Leser, B; Offenberger, M; Weiner, M [eds.

2006-07-01

The report for the year 2005 falls at a time of change in both the Scientific and Administrative Managing Directors of the GSF. Thus securing continuity of the projects was a priority for the sound development of the research centre. In recent years, research at the GSF has focused on the health of humans in their environment - recognition of risks for human health from environmental factors, elucidation of mechanisms of disease development, and development of concepts - in order to protect human health and the natural basis of life. Substantial resources were invested in genome research, including in the German Mouse Clinic, biomedical translational approaches were initiated, programme-oriented funding was introduced, and new pathways were established for the transfer of results into practice. The 'mid term' review confirmed both the direction and excellence. The scientific achievements of the GSF are presented in detail in the following report, which, as in previous years, is arranged according to the reports of the institutes. Further, GSF scientists ensure that the most recent research results can flow into guidelines and new legislation by participating in national and international advisory commissions. GSF scientists are members of the Commission on Radiological Protection of the Federal Environment Ministry, in the MAK commission of the German Research Foundation, and in the ICRP (International Commission on Radiological Protection), to name but a few, and also act as scientific advisors for policy in the areas of medicine and data processing. (orig.)

Physical model of lean suppression pressure oscillation phenomena: steam condensation in the light water reactor pressure suppression system (PSS)

International Nuclear Information System (INIS)

McCauley, E.W.; Holman, G.S.; Aust, E.; Schwan, H.; Vollbrandt, J.

1980-01-01

Using the results of large scale multivent tests conducted by GKSS, a physical model of chugging is developed. The unique combination of accurate digital data and cinematic data has provided the derivation of a detailed, quantified correlation between the dynamic physical variables and the associated two-phase thermo-hydraulic phenomena occurring during lean suppression (chugging) phases of the loss-of-coolant accident in a boiling water reactor pressure suppression system

Consequences of the EU basic safety standards. Omission of the clearance for demolition/disposal with respect to the deconstruction projects of WAK GmbH

International Nuclear Information System (INIS)

Wittmann, S.

2013-01-01

The WAK GmbH's task is to decommission the nuclear installation projects at the KIT Campus Nord. These include the former Reprocessing Plant (WAK-Anlage), the Multi-purpose Research Reactor (MZFR), Research Reactor 2 (FR2), Compact Sodium-cooled Nuclear Reactor Facility (KNK), the Hot Cells (HZ) and some more small research facilities of the KIT. The buildings should be released by paragraph 29 German Radiation Protection Ordinance (StrlSchV) after the demolition of the process-engineering equipment. For this the clearance levels for 'demolition of buildings' Annex III Tab. 1 Column 10 (StrlSchV) must be reached, depth profiles were sampled on order to estimate how much material of the walls has to be removed to reach the values of the clearance levels. In a proposal (10926/12 ATO 90 SOC 501 SAN 149) on the basis of new scientific knowledge the EU plans to introduce clearance levels from the IAEA - ''Application of the Concepts of Exclusion, Exemption and Clearance RS-G-1.7''. In the proposal there are only clearance levels for an unrestricted release. Clearance levels for specific purpose (Annex III Tab. 1 Column 9a - 9d, 10 and 10a StrlSchV) are not named. A worst case scenario has been made what the possible effects are if the unrestricted release in the proposal of the basic safety standards from EU is guilty for every material. An estimation were done how much material and how much volume of building rubbish has to be removed to reach these new resulted clearance. Based on these volumes the caused additional financial costs for the final disposal for the WAK GmbH were calculated. (orig.)

Framework of cloud parameterization including ice for 3-D mesoscale models

Energy Technology Data Exchange (ETDEWEB)

Levkov, L; Jacob, D; Eppel, D; Grassl, H

1989-01-01

A parameterization scheme for the simulation of ice in clouds incorporated into the hydrostatic version of the GKSS three-dimensional mesoscale model. Numerical simulations of precipitation are performed: over the Northe Sea, the Hawaiian trade wind area and in the region of the intertropical convergence zone. Not only some major features of convective structures in all three areas but also cloud-aerosol interactions have successfully been simulated. (orig.) With 19 figs., 2 tabs.

The microstructure of neutron-irradiated Fe-Cr alloys: A small-angle neutron scattering study

International Nuclear Information System (INIS)

Heintze, C.; Bergner, F.; Ulbricht, A.; Eckerlebe, H.

2009-01-01

Ferritic-martensitic chromium steels are candidate materials for future applications in both Gen-IV fission and fusion technology. Experimental investigation of neutron-irradiated Fe-Cr model alloys is important in order to gain a better understanding of the interplay of chromium content and irradiation behaviour. Small-angle neutron scattering (SANS) is particularly well suited to unfold the size distribution of non-planar irradiation-induced nanoscale features such as defect-solute clusters, nanovoids and α'- particles. This size distribution represents a statistically reliable average over a macroscopic volume. Assumptions on the dominant type of features can be checked against the ratio of magnetic and nuclear scattering. The materials investigated in this work are commercial-purity Fe-Cr alloys of nominal compositions Fe-2.5Cr, Fe-5Cr, Fe- 9Cr and Fe-12.5Cr (at %). Neutron irradiation was performed in the reactor BR2 at Mol (Belgium) at a temperature of 300 deg. C and neutron flux of 9 x 10 13 cm -2 s -1 (E > 1 MeV) [Matijasevic, JNM 377 (2008) 147]. The neutron exposures expressed in units of displacements per atom correspond to 0.6 and 1.5 dpa. A wavelength of 0.58 nm and three detector-sample distances of 1, 4 and 16 m were used in the SANS experiments carried out at the SANS-2 facility of GKSS Geesthacht (Germany). The samples were placed in a saturation magnetic field in order to separate magnetic and nuclear contributions. The scattering curves obtained for the unirradiated conditions of the four Fe-Cr alloys were taken as reference. We have found that the volume fraction of scatterers slightly increases with neutron exposure (Fe-9Cr) or exhibits a saturation-like behaviour (Fe-2.5Cr, Fe-5Cr and Fe-12.5Cr) and that the volume fraction at 1.5 dpa is an increasing function of the chromium level with a slight increase up to 9 at%Cr and a steep increase between 9 and 12.5 at%Cr. The radii of irradiation-induced scatterers are essentially less than 8 nm and

BMFT. Subproject environmental research, ecological research. Annual report 1991

International Nuclear Information System (INIS)

1992-01-01

This report summarizes the 1991 ecological research activities (ecosystems research, urban ecology, tropical ecology, forest decline, ecology of soils and waters, ecotoxicology, environmental pollution and health, protection of biotopes and protection of the species) which the project sponsors 'biology, energy, ecology' (Forschungszentrum Juelich) and 'environmental research and climatological research' (GSF-Forschungszentrum fuer Umwelt und Gesundheit) have been supervising on behalf of the Federal Ministry for Research and Technology to promote the subproject 'environmental research'. A general survey introduces the promoted projects, and standardized data sheets briefly introduce the individual activities. The appendix gives the project indices, the indices of joint projects, and a list of the supported companies and institutions. (BBR) [de

Manufacturing of microcomponents in a research institute under DIN EN ISO 9001

Science.gov (United States)

Maas, Dieter; Karl, Bernhard; Saile, Volker; Schulz, Joachim

2000-08-01

The Institute for Microstructure Technology at Forschungszentrum Karlsruhe has implemented a rigorous quality management system and was certified according to the DIN ISO EN 9001 standard in January 2000.

Description of steam condensation phenomena during the loss-of-coolant accident

International Nuclear Information System (INIS)

McCauley, E.W.; Holman, G.S.; Aust, E.; Furst, H.; Schwan, H.; Vollbrandt, J.

1981-01-01

Study of results from the full scale multivent pressure suppression experiment conducted by the GKSS Laboratory has developed an improved understanding of the dynamic, oscillatory steam condensation events and related loading functions which occur during the hypothetical loss-of-coolant accident in a boiling water nuclear reactor. Due to the unique measurements systems which combines both cinematic and digital data, qualified correlation between the dynamic physical variables and the associated two-phase thermo-hydraulic phenomena has been obtained

The QUENCH programme at Forschungszentrum Karlsruhe (FZK)

International Nuclear Information System (INIS)

Steinbrueck, M.; Schanz, G.; Sepold, L.; Stuckert, J.; Hering, W.; Homann, C.; Miassoedov, A.

2004-01-01

The QUENCH programme at FZK was launched to investigate the hydrogen source term during reflood of an overheated reactor core. It consists of large scale bundle experiments, separate-effects tests, modelling activities and application and validation of severe fuel damage (SFD) code systems. The paper describes the experimental part of the programme, namely the experimental facilities and test rigs as well as selected results obtained during the recent years. (author)

High-resolution diffractometer MINI-SFINKS

International Nuclear Information System (INIS)

Trunov, W.A.; Kudryaschev, W.A.; Uljanov, W.A.; Bulkin, A.P.; Muratov, W.G.; Korotkova, T.K.; Schebetov, A.F.

1991-01-01

The theoretical principles of the RTOF (reverse time-of-flight) method as well as the basic equations, the optimization of the neutron guides with Fourier chopper and the time-focussing detector setup are outlined. The powder diffractometer is described and some experimental results are given. The report was used as conceptual design basis for the FSS spectrometer at FRG-1 (GKSS Research Center) which has been optimized for non-destructive determination of residual stress. (orig.) With 18 figs., 3 tabs [de

USANS investigation of early stages of metal foam formation

CERN Document Server

Bellmann, D; Banhart, J

2002-01-01

Metallic foams are on the verge of being used in industrial applications. However, the mechanism of foam creation, especially the early stages, are still unexplored. Ultra small-angle neutron scattering (USANS), performed with the double-crystal diffractometer (DCD) at the Geesthacht Neutron Facility (GeNF), is a promising method for obtaining a three-dimensional average of a pore size distribution in a wide size range from about 100 nm to about 20 mu m. Analysis of the neutron scattering curves yielded pore size distributions which conformed with the results obtained by microscopy. (orig.)

Development of a 10 kW PEM fuel cell for stationary applications

Energy Technology Data Exchange (ETDEWEB)

Barthels, H.; Mergel, J.; Oetjen, H.F. [Institute fuer Energieverfahrenstechnik (IEV), Juelich (Germany)] [and others

1996-12-31

A 10 kW Proton Exchange Membrane Fuel Cell (PEMFC) is being developed as part of a long-term energy storage path for electricity in the photovoltaic demonstration plant called PHOEBUS at the Forschungszentrum Julich.

The Federal Research Report - facts as of 1986

International Nuclear Information System (INIS)

1986-01-01

The study abstracted reports on the present state of the Federal Republic of Germany. It contains data on the resources of science, research and development (including research programs), focuses of research and technology programs (including energy and energy technology research, environmental research, climatic research and safety research), the federal research and technology policies, international cooperation (IAEA included), promotion and research organizations (including the DKFZ, GKSS, GSF, KfK, HMI and IPP) as well as comprehensive statistics on federal and economic expenditures and expenditures on personnel. (DG) [de

The NOKO/TOPFLOW facility for natural convection flow

International Nuclear Information System (INIS)

Hicken, E.F.; Jaegers, H.; Schaffrath, A.; Weiss, F.-P.

2002-01-01

For the study of the effectiveness of passive safety systems a high pressure (up to 7 MPa) and high power (up to 4 MW) test facility - named NOKO - has been constructed and operated at the Forschungszentrum Juelich. From 1996-1998 this facility was used for a project within the 4th FP of the EU 'European BWR R and D Cluster for Innovative Passive Safety Systems'. An overview and selected results are given for the tests with two bundles of the emergency condenser, with the building and plate condenser, with 4 different passive initiators, with a passive flooding system and with decay heat removal tests during shutdown. It has been decided to decrease substantially the safety research at the Forschungszentrum Juelich; to maintain the experimental competence for two-phase flow the NOKO facility will be transferred to the Forschungszentrum Rossendorf by the end of the year 2000 up to the beginning of the year 2001. The facility will be named TOPFLOW; the main objectives of future tests will be oriented towards more generic research: investigation of steady state and transient two-phase flow phenomena especially transient two-phase flow patterns, the development of two-phase flow instrumentation, the generation of a data basis for Computational Fluid Dynamic (CFD)-Code validation and testing of heat exchangers and safety systems. An overview will be given about the modifications and improvements related to the test facility and the planned tests. (author)

Marinization concept for the TRICEPT TR600 robot

Energy Technology Data Exchange (ETDEWEB)

Meyer, A.; Aust, E.; Niemann, H.R.; Santos, J.F. dos [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Materialforschung; Hammerin, R.; Neumann, K.E. [Neos Robotics AB, Taeby (Sweden); Gibson, D. [National Hyperbaric Centre, Aberdeen (United Kingdom)

1998-11-01

The need for automated welding repair systems of marine structures, ship hulls and nuclear installations had lead to an increasing demand for subsea robots. Considering the application of friction welding to perform underwater repairs, a TRICEPT TR600 robot has been identified as the most suitable system to withstand the high reaction forces characteristic of this process. This study reviews initially the research and development work carried out at GKSS to modify and test a Siemens-MANUTEC robot. After a description of the TRICEPT TR600 robot a marinization concept is presented and discussed in detail. Problems of galvanic corrosion in seawater are addressed in a separate chapter. The deflection of the robot in subsea water currents is estimated with a worst-case calculation. (orig.) [Deutsch] Der Wunsch, Roboter auch unter Wasser einsetzen zu koennen, waechst mit steigendem Interesse nach automatisierten Schweissverfahren fuer Reparaturen an marinen Bauwerken, Schiffsruempfen und in Kernenergieanlagen. Fuer den Einsatz von Reibschweissverfahren fuer diese Reparaturen wurde der TRICEPT TR600-Roboter ausgewaehlt, da dieser auch den charakteristisch hohen Prozesskraeften widerstehen kann. Die notwendigen Modifikationen und Pruefungen werden beispielhaft anhand des bei der GKSS modifizierten Siemens-MANUTEC-Roboters vorgestellt. Nach einer Beschreibung des TRICEPT-Roboters werden die notwendigen Umbaumassnahmen detailliert dargestellt und diskutiert. Auf die Problematik der galvanischen Korrosion in Seewasser wird in einem gesonderten Kapitel naeher eingegangen. Zusaetzlich wird eine moegliche Ablenkung des Roboters durch Wasserstroemung ueberschlaegig berechnet. (orig.)

Comparison of ASTECV1.3.2 and ASTECV2 results for QUENCH 12 test

International Nuclear Information System (INIS)

Stefanova, A.

2010-01-01

This paper presents a comparison of QUENCH 12 test calculated results with ASTECv1.3R2 and ASTECv2 computer codes. The test was performed to investigate the behavior of VVER fuel assemblies. This investigation is a part of the 6th and 7th framework programs of the EC supported ISTC program. The test facility is located at Forschungszentrum in Karlsruhe. The structure of the test facility allows experimental studies under transient and accident conditions. The ASTEC1.3R2 and ASTECv2 computer codes have been used to simulate the investigated test. The base line input model for ASTEC was provided from Forschungszentrum, Karlsruhe. During the preparation of QUENCH - 12 experiment, the input deck was adapted to new initial and boundary conditions. The comparison show good agreement between measured data and ASTEC calculated results. (author)

A multi-stage-flash desalination plant of relative small performance with an integrated pressurized water reactor as a nuclear heat source

International Nuclear Information System (INIS)

Peltzer, M.; Petersen, G.

1976-01-01

In the Krupp-GKSS joint study MINIPLEX the requirements for seawater-desalination-plants with a performance in the range of 10,000 to 80,000 m 3 /d heated by a nuclear reactor are investigated. The reactor concept is similar to the integrated pressurized water reactor (IPWR) of the nuclear ship OTTO HAHN. The calculated costs of the desalinated water show, that due to the fuel cost advantages of reactors small and medium nuclear desalination plants are economically competetive with oil-fired plants since the steep rise of oil price in autumn 1973. (orig.) [de

EFAM ETM-CREEP 03 - the engineering flaw assessment method for creep

International Nuclear Information System (INIS)

Landes, J.D.; Schwalbe, K.H.

2002-01-01

EFAM ETM-CREEP is a document that describes the GKSS procedure for estimating residual lives for structural components that contain crack-like defects and operating in a high temperature regime where they undergo creep deformation. It uses the traditional parameters C t and C * and the ETM parameters δ 5 and δ 5 to characterize the crack extension rates. It relies on input from EFAM ETM 97 for calculating these parameters and from EFAM GTP-CREEP 02 to provide the material property data for crack extension rates and fracture toughness data. (orig.) [de

Layout and first results of the nanotomography endstation at the P05 beamline at PETRA III

Energy Technology Data Exchange (ETDEWEB)

Ogurreck, M.; Greving, I.; Beckmann, F.; Wilde, F.; Müller, M. [Institute of Materials Research, Helmholtz–Zentrum Geesthacht (Germany); Marschall, F.; Vogt, H.; Last, A. [Institute of Microstructure Technology, Karlsruhe Institute of Technology (Germany); Rosario, J. J. do [Institute of Advanced Ceramics, Technical University Hamburg–Harburg (Germany); Leib, E. W. [Institute of Physical Chemistry, University of Hamburg (Germany)

2016-01-28

The Helmholtz-Zentrum Geesthacht operates the P05 Imaging Beamline at the DESY storage ring PETRA III. This beamline is dedicated to micro- and nanotomography with two endstations. This paper will present the nanotomography endstation layout and first results obtained from commissioning and test experiments. First tests have been performed with CRLs as X-ray objectives and newly developed rolled X-ray prism lenses as condenser optics. This setup allows a resolution of 100 nm half period with an effective detector pixel size of 15nm. A first tomograph of a photonic glass sample was measured in early 2014.

Neutronics and thermal hydraulics coupling scheme for design improvement of liquid metal fast systems

International Nuclear Information System (INIS)

Sanchez-Espinoza, V.H.; Jaeger, W.; Travleev, A.; Monti, L.; Doern, R.

2009-01-01

Many advanced reactor concepts are nowadays under investigations within the Generation IV international initiative as well as in European research programs including subcritical and critical fast reactor systems cooled by liquid metal, gas and supercritical water. The Institute of Neutron Physics and Reactor Technology (INR) at the Forschungszentrum Karlsruhe GmbH is involved in different European projects like IP EUROTRANS, ELSY, ESFR. The main goal of these projects is, among others, to assess the technical feasibility of proposed concepts regarding safety, economics and transmutation requirements. In view of increased computer capabilities, improved computational schemes, where the neutronic and the thermal hydraulic solution is iteratively coupled, become practicable. The codes ERANOS2.1 and TRACE are being coupled to analyze fuel assembly or core designs of lead-cooled fast reactors (LFR). The neutronic solution obtained with the coupled system for a LFR fuel assembly was compared with the MCNP5 solution. It was shown that the coupled system is predicting physically sound results. The iterative coupling scheme was realized using Perlscripts and auxiliary Fortran programs to ensure that the mapping between the neutronic and the thermal hydraulic part is consistent. The coupled scheme is very flexible and appropriate for the neutron physical and thermal hydraulic investigation of fuel assemblies and of cores of lead cooled fast reactors. The developed methods and the obtained results will be presented and discussed. (author)

Evaluation of ITER design criteria applied to RAFM steels. Final report tasks - TW2-TTMS-005b, D2 and TW5-TTMS-005, D8

International Nuclear Information System (INIS)

Sunyk, R.; Aktaa, J.

2006-08-01

In the first line, the aim of the activity represented in this work is an application of two advanced material models to a simulation of the test blanket module (TBM) undergoing cyclic thermal and mechanical loadings. The first model is thereby the ABAQUS standard combined non-linear isotropic-kinematic hardening model whereas the second is a viscoplastic material model considering material damage and being newly implemented as an ABAQUS user material (UMAT). Material parameters for both models are adjusted using results of isothermal tensile and cyclic experiments performed at Forschungszentrum Karlsruhe GmbH (FZK) on EUROFER 97. As is generally known, EUROFER 97 is an important blanket material for the future fusion reactor and belongs to reduced activation ferriticmartensitic steels (RAFM), which soften under cyclic loading in contrast to austenitic steels exhibiting cyclic hardening. Moreover, the work is focused on the application of some existing design rules considered for austenitic steels and further evaluation of the rules by comparison of their predictions with results of cyclic simulations using the advanced material models mentioned above. Thereby, some important allowable stress limits are calculated under consideration of the cyclic softening of RAFM. Finally, new considerations concerning a mock-up experiment allowing to verify the advanced material models used in the present work and to assess a capability of the actual TBM design are represented here. (orig.) [de

German neutron scattering conference. Programme and abstracts

Energy Technology Data Exchange (ETDEWEB)

Brueckel, Thomas (ed.)

2012-07-01

The German Neutron Scattering Conference 2012 - Deutsche Neutronenstreutagung DN 2012 offers a forum for the presentation and critical discussion of recent results obtained with neutron scattering and complementary techniques. The meeting is organized on behalf of the German Committee for Research with Neutrons - Komitee Forschung mit Neutronen KFN - by the Juelich Centre for Neutron Science JCNS of Forschungszentrum Juelich GmbH. In between the large European and international neutron scattering conferences ECNS (2011 in Prague) and ICNS (2013 in Edinburgh), it offers the vibrant German and international neutron community an opportunity to debate topical issues in a stimulating atmosphere. Originating from ''BMBF Verbundtreffen'' - meetings for projects funded by the German Federal Ministry of Education and Research - this conference series has a strong tradition of providing a forum for the discussion of collaborative research projects and future developments in the field of research with neutrons in general. Neutron scattering, by its very nature, is used as a powerful probe in many different disciplines and areas, from particle and condensed matter physics through to chemistry, biology, materials sciences, engineering sciences, right up to geology and cultural heritage; the German Neutron Scattering Conference thus provides a unique chance for exploring interdisciplinary research opportunities. It also serves as a showcase for recent method and instrument developments and to inform users of new advances at neutron facilities.

German neutron scattering conference. Programme and abstracts

International Nuclear Information System (INIS)

Brueckel, Thomas

2012-01-01

The German Neutron Scattering Conference 2012 - Deutsche Neutronenstreutagung DN 2012 offers a forum for the presentation and critical discussion of recent results obtained with neutron scattering and complementary techniques. The meeting is organized on behalf of the German Committee for Research with Neutrons - Komitee Forschung mit Neutronen KFN - by the Juelich Centre for Neutron Science JCNS of Forschungszentrum Juelich GmbH. In between the large European and international neutron scattering conferences ECNS (2011 in Prague) and ICNS (2013 in Edinburgh), it offers the vibrant German and international neutron community an opportunity to debate topical issues in a stimulating atmosphere. Originating from ''BMBF Verbundtreffen'' - meetings for projects funded by the German Federal Ministry of Education and Research - this conference series has a strong tradition of providing a forum for the discussion of collaborative research projects and future developments in the field of research with neutrons in general. Neutron scattering, by its very nature, is used as a powerful probe in many different disciplines and areas, from particle and condensed matter physics through to chemistry, biology, materials sciences, engineering sciences, right up to geology and cultural heritage; the German Neutron Scattering Conference thus provides a unique chance for exploring interdisciplinary research opportunities. It also serves as a showcase for recent method and instrument developments and to inform users of new advances at neutron facilities.

Forschungszentrum Karlsruhe, Technik und Umwelt. Progress report 1994

International Nuclear Information System (INIS)

1995-01-01

The points of main effort which are discussed reflect the institution's R and D scheme. The summaries submitted by the different institutes and departments are compiled by the topics and fields they deal with. The report gives an account of the progress under each of the KfK R and D projects. This correlation facilitates comparisons between the targets and actual achievements and elucidates the general relation between the individual tasks which often are in the care of several institutes at a time. The departments and institutes and their respective tasks are introduced, and a comprehensive appendix is attached which lists the 1994 publications. (orig.) [de

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 1995

International Nuclear Information System (INIS)

Nitsche, H.

1996-02-01

The activities of the institute in the year 1995 are described by short communications. The themes of the chapters are: Speciation and migration of radionuclides; behaviour of colloids and aerosols; organic matter and their interaction with radionuclides; application of x-ray absorption spectroscopy; chemistry of heaviest elements. (SR)

Forschungszentrum Juelich, Institut fuer Kernphysik. Annual report 1993

International Nuclear Information System (INIS)

Baur, G.; Filges, D.; Kilian, K.; Maier, R.; Rossen, P. v.; Schult, O.; Seyfarth, H.; Speth, J.; Turek, P.

1994-02-01

The annual report contains extended abstracts about the work performed in the named research center in 1993 together with a list of talks and publications. The work concerns experimental and theoretical studies on medium and high energy physics, nuclear spectroscopy, nuclear structure and reaction mechanisms, developments of the cooler synchrotron COSY, isochronous cyclotron and ion sources, the magnetic spectrometer BIG KARL, as well as technical developments on data acquisition and processing, electronics, detector and targets, and ESS. (DG)

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 1993

International Nuclear Information System (INIS)

Nitsche, H.; Bernhard, G.

1994-06-01

Since the founding of the Institute, a reorientation of the scientific direction was initiated: From the production and application of radioisotopes during the period before 1992 toward the new focus of radioecological research for risk assessment and remediation of radionuclide contaminations. The research relates to contamination problems from uranium mining in the German states of Saxony and Thuringia and in the neighboring Czech Republic, and from nuclear weapons production, testing, and accidents in the former Soviet Union. The new research direction of the Institute covers the essential aspects of radionuclide transport in the geo- and biosphere. It includes the distribution of radioactivity in ground- and surface waters and in air. We are studying the interaction of radioactive materials (a) at the interface between aqueous phase and rocks, minerals and soils, (b) the formation and distribution of colloids and aerosols, and (c) the mobilization and retardation of radionuclides through the interaction with organic contaminants and biological decay products. Our studies are essential for the successful development of environmental decontamination and remediation strategies. This report reflects the scientific transition of the Institute. The contributions to the section on ''Ecological Research'' are already focused toward the new challenge. The research that is summarized as ''General Research'' and ''Chemistry of the Heavy Elements'' clearly bear the elements of aerosol science. (orig.)

Large Scale Model Test Investigation on Wave Run-Up in Irregular Waves at Slender Piles

DEFF Research Database (Denmark)

Ramirez, Jorge Robert Rodriguez; Frigaard, Peter; Andersen, Thomas Lykke

2013-01-01

An experimental large scale study on wave run-up generated loads on entrance platforms for offshore wind turbines was performed. The experiments were performed at GrosserWellenkanal (GWK), Forschungszentrum Küste (FZK) in Hannover, Germany. The present paper deals with the run-up heights determin...

Derivation of the Photosynthetically Available Radiation from METEOSAT data

Energy Technology Data Exchange (ETDEWEB)

Schiller, K. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Hydrophysik

2001-07-01

Two different models, a Physical Model and a Neural Net, are used for the derivation of the photosynthetically available radiation (PAR) from METEOSAT data in the German Bight. Both models are constructed for the calculation of PAR in the German Bight in terms of an easily accessible time series of PAR fields; advantages and disadvantages of both models are discussed. A software package was generated in IDL for the realisation on the computer, its structure is motivated and physic background informations are given. With slight modifications all programs can be applied for the calculation of PAR for arbitary regions (but not over land). A zip file containing all programs and classes used, the technical html documentation and this report can be obtained from http://gfesunl.gkss.de/software/meteosat2par. (orig.) [German] Zur Ableitung der zur Photosynthese zur Verfuegung stehenden Strahlung (PAR) in der Deutschen Bucht aus METEOSAT-Daten werden zwei verschiedene Modelle, ein Physikalisches Modell und ein Neuranales Netz, benutzt. Beide Modelle sind darauf ausgelegt, PAR in der Deutschen Bucht in Form einer einfach zugaenglichen Zeitreihe von PAR-Feldern zu berechnen; Vor- und Nachteile beider Modelle werden diskutiert. Zur Realisierung auf dem Computer wurde ein Programmpaket in IDL erstellt, dessen Struktur motiviert wird und physikalische Hintergruende erlaeutert werden. Alle Programme sind so angelegt, dass sie sich durch geringfuegige Modifikationen eignen, PAR auch fuer andere Gebiete (aber nicht ueber Land) zu berechnen. Ein Zip-File aller benutzter Programme, Klassen, der technischen Html-Dokumentation und dieses Berichtes kann bei http://gfesunl.gkss.de/software/meteosat2par bezogen werden. (orig.)

SIAM CM 09 - The SIAM method for applying cohesive models to the damage behaviour of engineering materials and structures

International Nuclear Information System (INIS)

Scheider, Ingo; Cornec, Alfred; Schwalbe, Karl-Heinz

2009-01-01

This document provides guidance on the determination of damage and fracture of ductile metallic materials and structures made thereof, based mainly on experience obtained at GKSS. The method used for the fracture prediction is the cohesive model, in which material separation is represented by interface elements and their constitutive behaviour, the so-called traction-separation law, in the framework of finite elements. Several traction-separation laws are discussed, some of which are already implemented in commercial finite element codes and therefore easy applicable. Methods are described for the determination of the cohesive parameters, using a hybrid experimental/numerical approach. (orig.)

Multiple-vent programme to test the pressure suppression system

International Nuclear Information System (INIS)

Aust, E.; Schwan, H.; Vollbrandt, I.

1979-01-01

Three pre-tests with a multiple vent configuration have been performed at the GKSS pressure suppression test facility. First test results indicate significant chugging events with occur periodically with 0.4 to 0.2 Hz. These events appear simultaneously in less than 10 ms at the exit of the three vent pipes and cause pressure pulses in the range of 3 bar. This report gives a short description of the test facility and presents the boundary conditions of the test facility and presents the boundary conditions of the three pre-tests, test results and a first valuation of the experimental informations. (orig.) [de

EFAM ETM 97 - the ETM method for assessing the significance of crack-like defects in engineering structures, comprising the versions ETM 97/1 and ETM 97/2

International Nuclear Information System (INIS)

Schwalbe, K.H.; Zerbst, U.; Kim, Y.J.; Brocks, W.; Cornec, A.; Heerens, J.; Amstutz, H.

1998-01-01

EFAM ETM 97 is a document of the GKSS Procedure 'Engineering Flaw Assessment Method (EFAM)'. It describes methods for estimating the crack driving force for cracks in structural components in terms of the crack tip opening displacement, δ 5 , and the J-integral. It consists of several modules covering particular application problems. Appendices to this document provide solutions for the stress intensity factor and the yield load, as well as information on transferability of fracture parameters and on the treatment of bi-axial and mixed mode loadings. A second assessment route is also given in an appendix. (orig.) [de

SIAM CM 09 - The SIAM method for applying cohesive models to the damage behaviour of engineering materials and structures

Energy Technology Data Exchange (ETDEWEB)

Scheider, Ingo; Cornec, Alfred [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Materialforschung; Schwalbe, Karl-Heinz

2009-12-19

This document provides guidance on the determination of damage and fracture of ductile metallic materials and structures made thereof, based mainly on experience obtained at GKSS. The method used for the fracture prediction is the cohesive model, in which material separation is represented by interface elements and their constitutive behaviour, the so-called traction-separation law, in the framework of finite elements. Several traction-separation laws are discussed, some of which are already implemented in commercial finite element codes and therefore easy applicable. Methods are described for the determination of the cohesive parameters, using a hybrid experimental/numerical approach. (orig.)

Pressure suppression experiments in the PSS test rig of the GKSS

International Nuclear Information System (INIS)

Aust, E.

1975-01-01

A pressure suppression system has been developed for the advanced pressurized water reactor. Due to its compact layout, this system enables the reactor plant to be installed in the ship in a volume and weight saving manner. Because of significant differences in design and construction of this system as compared to similar systems for land based nuclear power plants, a test facility was built to experimentally demonstrate the effectiveness and the functioning of this system. The test facility will be described and a program of the major experimental tests will be given. Finally, some preliminary results of tests with air carry over in the wet well will be presented. (orig.) [de

Stratigraphy, sedimentology and bulk organic geochemistry of black ...

Indian Academy of Sciences (India)

Stratigraphy, sedimentology and bulk organic geochemistry of black shales from the Proterozoic. Vindhyan Supergroup (central India). S Banerjee1,∗. , S Dutta. 2. , S Paikaray. 1 and U Mann. 2. 1. Department of Earth Sciences, Indian Institute of Technology Bombay, Powai, Mumbai 400 076, India. 2. Forschungszentrum ...

Annual report 1980

International Nuclear Information System (INIS)

1981-01-01

The work performed at the Forschungszentrum Seibersdorf is divided into five basic areas: energy and nuclear safety; new technologies and methods; world defence, health and maintenance; development and information; and planning and coordination. These areas are briefly described and various projects within them are outlined. (G.T.H.)

Micro powder-injection moulding of metals and ceramics

Indian Academy of Sciences (India)

Development of micro-MIM/-CIM was started at Forschungszentrum Karlsruhe with the aim of creating a process suitable for a wide range of materials as well as for medium-scale and large-scale production of micro components. Using enhanced machine technology and special tempering procedures, this process enables ...

The legacy of the experimental hadron physics programme at COSY

Energy Technology Data Exchange (ETDEWEB)

Wilkin, C. [UCL, Physics and Astronomy Department, London (United Kingdom)

2017-06-15

The experimental hadronic physics programme at the COoler SYnchrotron of the Forschungszentrum Juelich terminated at the end of 2014. After describing the accelerator and the associated facilities, a review is presented of the major achievements in the field realized over the twenty years of intense research activity. (orig.)

Untitled

Indian Academy of Sciences (India)

Small angle neutron scattering from helium bubbles in metals. F CARSUGH. Institut für Festkörperforschung, Forschungszentrum Jülich, D-52425 Jülich, Germany. Abstract. Small angle neutron Scattering (SANS) has been widely used in investigating defects in metals, and in particular, to characterize the helium bubble ...

Fission product retention in TRISO coated UO2 particle fuels subjected to HTR simulated core heating tests

International Nuclear Information System (INIS)

Baldwin, C.A.; Kania, M.J.

1991-01-01

Results of the examination and analysis of 25,730 individual microspheres from spherical fuel elements HFR-K3/1 and HFR-K3/3 are reported. The parent spheres were irradiated in excess of end-of-life exposure and subsequently subjected to simulated core heating tests in a special high-temperature furnace at Forschungszentrum, Juelich, GmbH (KFA). Following the heating tests, the spheres were electrolytically deconsolidated to obtain unbounded fuel particles for Irradiated Microsphere Gamma Analyzer (IMGA) analysis. For sphere HFR-K3/1, which was heated for 500 h at 1600 deg. C, only four particles were identified as having released fission products. The remaining particles from the sphere showed no statistical evidence of fission product release. Scanning Electron Microscopy (SEM) examination showed that three of the defect particles had large sections of the TRISO coating missing, while the fourth appeared normal. For sphere HFR-K3/3, which was heated for 100 h at 1800 deg. C, the IMGA data revealed that fission product release (cesium) from individual particles was significant and that there was large particle-to-particle variation in retention capabilities. Individual particle release (cesium) averaged ten times the KFA-measured integral spherical fuel element release value. In addition, the bimodal distribution of the individual particle data indicated that two distinct modes of failure at fuel temperatures of 1800 deg. C and above may exist. (author). 6 refs, 6 figs, 4 tabs

Observed OH and HO2 concentrations in the upper troposphere inside and outside of Asian monsoon influenced air.

Science.gov (United States)

Marno, D. R.; Künstler, C.; Hens, K.; Tatum Ernest, C.; Broch, S.; Fuchs, H.; Martinez, M.; Bourtsoukidis, E.; Williams, J.; Holland, F.; Hofzumahaus, A.; Tomsche, L.; Fischer, H.; Klausner, T.; Schlager, H.; Eirenschmalz, L.; Stratmann, G.; Stock, P.; Ziereis, H.; Roiger, A.; Bohn, B.; Zahn, A.; Wahner, A.; Lelieveld, J.; Harder, H.

2016-12-01

The Asian monsoon convectively transports pollutants like volatile organic compounds (VOCs), NOx, and SO2 from the boundary layer over South Asia into the upper troposphere where they can potentially enter the stratosphere, or be dispersed globally. Therefore, it is crucial to understand the oxidizing capacity of this system regarding the rate of aerosol formation, and conversion of pollutants into compounds that have much shorter atmospheric lifetimes. OH plays a central role in this oxidation process. During the OMO-ASIA campaign in the summer of 2015, OH and HO2 were measured onboard the High Altitude Long-Range (HALO) Research Aircraft. Two laser-induced fluorescence instruments based on the fluorescence assay by gas expansion technique (LIF-FAGE) had been deployed, the AIR-LIF instrument from Forschungszentrum Jülich GmbH and the HORUS instrument from the Max Planck Institute for Chemistry, Mainz. To measure the chemical background of OH potentially produced inside the HORUS instrument from highly oxidized VOCs, atmospheric OH is scavenged by an Inlet Pre-injector (IPI) system. This was the first time an IPI system was implemented within an airborne LIF-FAGE instrument measuring OH and HO2. Throughout this campaign OH and HO2 were measured at 12 to 15km within the Asian monsoon anticyclone. These measurements have been contrasted by probing air outside the anticyclone in air masses influenced by North American emissions, and in very clean air masses originated from the southern hemisphere.

Fission product retention in TRISCO coated UO2 particle fuels subjected to HTR simulated core heating tests

International Nuclear Information System (INIS)

Baldwin, C.A.; Kania, M.J.

1990-11-01

Results of the examination and analysis of 25,730 individual microspheres from spherical fuel elements HFR-K3/1 and HFR-K3/3 are reported. The parent spheres were irradiated in excess of end-of-life exposure and subsequently subjected to simulated core heating tests in a special high-temperature furnace at Forschungszentrum, Juelich, GmbH (KFA). Following the heating tests, the spheres were electrolytically deconsolidated to obtain unbonded fuel particles for Irradiated Microsphere Gamma Analyzer (IMGA) analysis. For sphere HFR-K3/1, which was heated for 500 h at 1600 degree C, only four particles were identified as having released fission products. The remaining particles from the sphere showed no statistical evidence of fission product release. Scanning Electron Microscopy (SEM) examination showed that three of the defect particles had large sections of the TRISO coating missing, while the fourth appeared normal. For sphere HFR-K3/3, which was heated for 100 h at 1800 degree C, the IMGA data revealed that fission product release (cesium) from individual particles was significant and that there was large particle-to-particle variation in retention capabilities. Individual particle release (cesium) averaged ten times the KFA-measured integral spherical fuel element release value. In addition, the bimodal distribution of the individual particle data indicated that two distinct modes of failure at fuel temperatures of 1800 degree C and above may exist. 6 refs., 6 figs., 4 tabs

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2003

International Nuclear Information System (INIS)

Wiedemann, M.; Haury, H.J.; Goedde, M.; Guldner, H.; Kettembeil, S.; Leser, B.; Meyer-Streng, O.

2004-01-01

The GSF develops scientific principles that provide the basis for protecting human health and the natural basis of life for the future. GSF health research focuses on the genetic and immunological basis of molecular protection and define and their dysfunction during disease development, and the identification of new factors that contribute to sickness or health. (orig.)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2009

International Nuclear Information System (INIS)

Buescher, Markus; Hanhart, Christoph; Krewald, Siegfried; Machner, Hartmut; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans

2010-05-01

The following topics were dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiment. (HSI)

GSF-Forschungszentrum fuer Umwelt und Gesundheit. Annual report '95

International Nuclear Information System (INIS)

Haury, H.J.

1996-01-01

As a center for environmental sciences, the major field of work of the GSF is research into and performance of complex and multidisciplinary problems and tasks. The annual report of the year 1995 presents compact surveys of the activities and results achieved in the three major research areas of ecology and biology (investigation of effects and response), environmental engineering, and human health (epidemiology a.o.). The various reports of the institutes, departments and project groups cover annual surveys as well as topical information, (ecosystems in agriculture), and information on the development of the infrastructure. (DG) [de

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2009

Energy Technology Data Exchange (ETDEWEB)

Buescher, Markus; Hanhart, Christoph; Krewald, Siegfried; Machner, Hartmut; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans (eds.)

2010-05-15

The following topics were dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiment. (HSI)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2005

International Nuclear Information System (INIS)

Wiedemann, M.; Haury, H.J.; Guldner, H.; Kettembeil, S.; Leser, B.; Offenberger, M.; Weiner, M.

2006-01-01

The report for the year 2005 falls at a time of change in both the Scientific and Administrative Managing Directors of the GSF. Thus securing continuity of the projects was a priority for the sound development of the research centre. In recent years, research at the GSF has focused on the health of humans in their environment - recognition of risks for human health from environmental factors, elucidation of mechanisms of disease development, and development of concepts - in order to protect human health and the natural basis of life. Substantial resources were invested in genome research, including in the German Mouse Clinic, biomedical translational approaches were initiated, programme-oriented funding was introduced, and new pathways were established for the transfer of results into practice. The 'mid term' review confirmed both the direction and excellence. The scientific achievements of the GSF are presented in detail in the following report, which, as in previous years, is arranged according to the reports of the institutes. Further, GSF scientists ensure that the most recent research results can flow into guidelines and new legislation by participating in national and international advisory commissions. GSF scientists are members of the Commission on Radiological Protection of the Federal Environment Ministry, in the MAK commission of the German Research Foundation, and in the ICRP (International Commission on Radiological Protection), to name but a few, and also act as scientific advisors for policy in the areas of medicine and data processing. (orig.)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 2001

International Nuclear Information System (INIS)

Haury, H.J.; Wiedemann, M.; Goedde, M.; Guldner, H.; Kettembeil, S.; Meyer-Streng, O.; Weiner, M.

2002-01-01

Nothing has moved the GSF in recent years as much as the structural change that has taken place within the Helmholtz Association, and the associated introduction of a system of programme-oriented support. The members of the Scientific-Technical Board and the staff of the Scientific-Technical Department have been and still are particularly strongly involved in the process. We also wish the new President of the Helmholtz Association, Professor Kroell, the skills and good fortune needed to lead our mother organisation in a future that is determined by scientific competition and remarkable scientific achievement, and not marked by administration and new bureaucratic impediments. While these discussions, so important for the future of the GSF, have been proceeding, scientific research has of course continued successfully. One good example is genome research. The GSF not only contributes a decisive part of the research within the Helmholtz Association, it also makes an important contribution at both the national and international scales. The GSF has paid particular attention for years to the question of technology transfer. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The work of the institute is directed to the assessment and enhancement of the safety of technical plants and to the increase of the efficiency and environmental sustainability of those facilities. Subjects of investigation are equally nuclear plants and installations of process industries. To achieve the goals mentioned, the institute is mainly engaged in the scientific fields of thermal fluid dynamics including magneto-hydrodynamics (MHD) and materials sciences. In 2003, the ISR worked on the following main scientific projects. Sub-programme: Plant and Rector Safety. Project: accident analysis of nuclear reactors, safety of materials and components, particle and radiation transport, safety and efficiency of chemical processes. Sub-programme: Thermal Fluid Dynamics. Project: magneto-hydrodynamics, thermal fluid dynamics of multiphase systems. Considerable progress could also be achieved in the CFD simulation of two-phase flows. New approaches for the forces acting on steam bubbles in a water flow could be developed and implemented into the CFX code in close cooperation with the CFX developer ANSYS/CFX. The qualified models allow to simulate the evolution of bubble size specific radial void distribution profiles along the flow path. These theoretical studies and the related experiments at the Rossendorf TOPFLOW test facility represent an important part of the German CFD network that aims at the improvement of thermal hydraulic calculation methods in reactor safety. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1997

Energy Technology Data Exchange (ETDEWEB)

Weiss, F P; Rindelhardt, U [eds.

1998-10-01

The research work of the institute aims at the assessment and increase of the safety of technical facilities. Subject of the investigation are equally nuclear plants and installations of process industries. To analyse thermo-fluiddynamic phenomena of accident scenarios physical models and computer codes are developed as well for multi-phase and multi-component flows as for the time and space dependent power release (neutron kinetics in light water reactors, reaction kinetics of exothermic chemical reactions). Emphasis is put on the description of spatial flows and the transient evolution of flow patterns. (orig.)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2007

Energy Technology Data Exchange (ETDEWEB)

Buescher, M.; Hanhart, C.; Krewald, S.; Machner, H.; Maier, R.; Meissner, U.G.; Ritman, J.; Stockhorst, H.; Stroeher, H. (eds.)

2008-03-15

The following topics are dealt with, Physics at COSY, external experiments, theoretical investigations. COSY operation and developments, preparation for FAIR. See hints under the relevant topics. (HSI)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2003

International Nuclear Information System (INIS)

2004-01-01

The work of the institute is directed to the assessment and enhancement of the safety of technical plants and to the increase of the efficiency and environmental sustainability of those facilities. Subjects of investigation are equally nuclear plants and installations of process industries. To achieve the goals mentioned, the institute is mainly engaged in the scientific fields of thermal fluid dynamics including magneto-hydrodynamics (MHD) and materials sciences. In 2003, the ISR worked on the following main scientific projects. Sub-programme: Plant and Rector Safety. Project: accident analysis of nuclear reactors, safety of materials and components, particle and radiation transport, safety and efficiency of chemical processes. Sub-programme: Thermal Fluid Dynamics. Project: magneto-hydrodynamics, thermal fluid dynamics of multiphase systems. Considerable progress could also be achieved in the CFD simulation of two-phase flows. New approaches for the forces acting on steam bubbles in a water flow could be developed and implemented into the CFX code in close cooperation with the CFX developer ANSYS/CFX. The qualified models allow to simulate the evolution of bubble size specific radial void distribution profiles along the flow path. These theoretical studies and the related experiments at the Rossendorf TOPFLOW test facility represent an important part of the German CFD network that aims at the improvement of thermal hydraulic calculation methods in reactor safety. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1999

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2000-02-01

The work of the institute is directed to the assessment and enhancement of the safety of large technical plants and to the increase of the effectiveness and environmental sustainability of those facilities. Subjects of investigations are equally nuclear plants and installations of process industries. To achieve the above mentioned goals, the institute is engaged in two scientific fields, i.e. thermo-fluiddynamics including magneto-hydrodynamics (MHD) and materials/components safety. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2001

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2002-06-01

In the reporting period, the ISR performed 9 meetings and workshops with international participation. It is especially worth mentioning the workshop on 'Process Control and Condition Monitoring in Chemical Plants' that was conducted for the first time, and the concluding conference of the DFG Innovationskolleg 'Magneto-Hydrodynamics of Electrically Conducting Fluids'. At the ROCOM test facility (Rossendorf Coolant Mixing facility), a large series of experiments was performed dedicated to coolant mixing phenomena in PWRs during boron dilution and cold water transients. CFD models were validated against those experiments and a so called semi-analytical mixing model was developed. By coupling that semi-analytical model with the DYN3D reactor dynamics code it could be shown that a shut down reactor gets re-critical when a plug of 36 m 3 deionated water enters the core after switching on the first main coolant pump. However, that deionated plug does not lead to non-allowed high coolant pressure or fuel temperatures. The behavior of a RPV lower callotte during a severe accident with melt slumping into the lower plenum is studied in 1:10 test at Royal Institute of Technology Stockholm. At the ISR computational methods were developed for pre- and post-test calculations of those experiments in order to predict the time and mode of RPV failure. The temperature, as well as location, and time of the RPV failure were found in good agreement with the experiment. Two patents resulted from those studies. One of them proposes a creep stool to mechanically support the RPV deformed by creeping, and the flooding of the reactor pit for ex vessel cooling of the melt inside the vessel. Such measures extend the time till RPV failure and offer the possibility for additional accident management procedures that can prevent the RPV meltthrough. The MHD department of ISR was especially successful in 2001. In the framework of the Bundesministerium fuer Bildung und Forschung (BMBF) initiative 'Innovative Gruenderlabore' they were granted an amount of 750,000 DM to be able permanently to create the conditions for applied and market relevant developments that allow young scientists to found their own private technology business. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1996

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1997-08-01

The research of the institute aims at the safety assessment of the design of nuclear and chemical facilities, the development of accident management procedures, and the increase of operational safety by improved plant surveillance. Physical models and computer codes are developed for multiphase/multicomponent flows and for the space and time dependent power release in nuclear and chemical reactors to be able to analyse the thermo-fluiddynamic phenomena during assumed accident scenarios. Emphasis is particularly focussed on spatial flow phenomena and the time dependent change of flow patterns. Sustainable void fraction probes and tomographic systems are developed to measure those parameters of two phase flows that characterize the exchange of pulse, energy and mass between the phases and components. The research related to materials safety is directed to the behaviour of components exposed to neutron and gamma radiation. The susceptibility to irradiation induced embrittlement and the behaviour of annealed material during reirradiation are investigated by fracture mechanical methods in dependence on the materials composition. The work on process and plant diagnostics makes available basic methods for early failure detection and operational monitoring which are important means of accident prevention. Recent initiatives of the institute are concerned with the transport of pollutants in the geosphere. Particularly, codes are developed for the simulation of physical and chemical processes during the transport of pollutants in unsaturated zones of the soil. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1996

Energy Technology Data Exchange (ETDEWEB)

Weiss, F P; Rindelhardt, U [eds.

1997-08-01

The research of the institute aims at the safety assessment of the design of nuclear and chemical facilities, the development of accident management procedures, and the increase of operational safety by improved plant surveillance. Physical models and computer codes are developed for multiphase/multicomponent flows and for the space and time dependent power release in nuclear and chemical reactors to be able to analyse the thermo-fluiddynamic phenomena during assumed accident scenarios. Emphasis is particulary focussed on spatial flow phenomena and the time dependent change of flow patterns. Sustainable void fraction probes and tomographic systems are developed to measure those parameters of two phase flows that characterize the exchange of pulse, energy and mass between the phases and components. The research related to materials safety is directed to the behaviour of components exposed to neutron and gamma radiation. The susceptibility to irradiation induced embrittlement and the behaviour of annealed material during reirradiation are investigated by fracture mechanical methods in dependence on the materials composition. The work on process and plant diagnostics makes available basic methods for early failure detection and operational monitoring which are important means of accident prevention. Recent initiatives of the institute are concerned with the transport of pollutants in the geosphere. Particularly, codes are developed for the simulation of physical and chemical processes during the transport of pollutants in unsaturated zones of the soil. (orig.)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2010

Energy Technology Data Exchange (ETDEWEB)

Buescher, Markus; Grzonka, Dieter; Hanhart, Christoph; Krewald, Siegfried; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans (eds.)

2011-04-15

The following topics are dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiments. (HSI)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2010

International Nuclear Information System (INIS)

Buescher, Markus; Grzonka, Dieter; Hanhart, Christoph; Krewald, Siegfried; Maier, Rudolf; Meissner, Ulf G.; Ritman, James; Stockhorst, Hans; Stroeher, Hans

2011-04-01

The following topics are dealt with: Physics at COSY, COSY operation and developments, further experimental activities, theoretical investigations, preparation of the HESR, the PANDA experiments. (HSI)

The Hot Cell Radioactive Waste Concept of Forschungszentrum Juelich

International Nuclear Information System (INIS)

Pott, G.; Halaszovich, St.

1999-01-01

During the last 30 years extensive scientific examinations on radioactive metals,ceramics and fuel elements have been carried out, so that a high volume of waste has resulted. Also from the dismantling of irradiated facilities metallics waste has o be handed. Prior for equipment repair the hot cell involved has to be decontaminated and a large amount of lower active waste is produced. The waste is collected for conditioning and storing. There are different categories as: low active liquid waste, low active burnable waste, fuel waste, low and high active metallic waste. For each waste category special transport container are used. For the volume reduction our Waste Department is equipped with special facilities e.g.: furnace for burning, drying, liquids evaporators, hydraulic press for pelletizing, decontamination box for the dismantling ad cleaning of components. After conditioning the waste will be stored on site or transported to final storage in a salt mine (ERAM) . Special documentation has to be done for the acceptance of this waste

Forschungszentrum Rossendorf, Institute for Safety Research. Annual report 1994

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1995-06-01

Striving for the assessment and enhancement of design based safety, for improving operational safety, and for risk management IFS is engaged in the following methodical fields: - Experimental and theoretical thermo-fluiddynamics, - 3-dimensional neutron kinetics, - characterization of the mechanical behaviour of aged materials and microstructural analysis, -transport calculations of particle and radiation fields, - early failure diagnostics of processes and plants, - hazard ranking of non-nuclear waste deposits and support of the selection of appropriate remediation procedures by means of decision analysis. In 1994, special efforts were directed to the extension of experimental facilities needed for radioactive materials testing and for two phase flow investigations. Moreover, first research projects on the safety of VVER reactors could successfully be finished. (orig./HP)

Forschungszentrum Rossendorf, Institute for Safety Research. Annual report 1995

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1996-09-01

The scientific work of the Institute of Safety Research covers a wide range of safety related investigations. During 1995 important results on thermo-fluid dynamic single effects, thermalhydraulics and neutron kinetics for accident analysis, materials safety, simulation of radiation and particle transport, mechanical integrity of technical systems and process monitoring, risk management for waste deposits, magneto-hydrodynamics of conductive fluids, and of renewable energies were reached. The annual report presents also lists of publications, conference contributions, meetings, and workshops. (DG)

Forschungszentrum Juelich, Institut fuer Kernphysik/COSY. Annual report 2007

International Nuclear Information System (INIS)

Buescher, M.; Hanhart, C.; Krewald, S.; Machner, H.; Maier, R.; Meissner, U.G.; Ritman, J.; Stockhorst, H.; Stroeher, H.

2008-03-01

The following topics are dealt with, Physics at COSY, external experiments, theoretical investigations. COSY operation and developments, preparation for FAIR. See hints under the relevant topics. (HSI)

Forschungszentrum Rossendorf, Institute for Safety Research. Annual report 1993

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

1994-06-01

Seven of the 10 selected reports describe computer codes for the analysis of accident scenarios at the Russian VVER type reactors, irradiation induced defect structures, neutron fluence calculations, acoustic leak detection using neural networks, diagnostics and modelling of component vibration of VVER reactors, and a specification of a technical system to improve the operational monitoring of Zaporoche-5 reactor. The other 3 reports show a computer simulation of a plasma source, an decision analysis for the assessment of risks with conventional and radioactive wastes, and investigations on renewable energy systems. (DG)

GSF - Forschungszentrum fuer Umwelt und Gesundheit. Annual report 1998

International Nuclear Information System (INIS)

Haury, H.J.; Wiedemann, M.; Grill, A.; Guldner, H.; Kettembeil, S.; Knauer, R.; Meyer-Streng, O.; Weiner, M.

1999-01-01

The research fields of the GSF in 1998 were as follows. Behaviour and fate of foreign compounds in the environment, biogeochemical cycles and signalling in terrestrial and aquatic systems, risk assessment and management in ecosystems, biological effects of chemicals and radiation on the cellular level, genome analysis and genetic predisposition, influence of the environment on differentiation, development and carcinogenesis, health risk resulting from internal and external exposure, basic research on the improvement of diagnostic and therapeutical methods, clinical-experimental research on diagnosis and therapy, improvement of efficacy and cost effectiveness in public health care. Separate abstracts were prepared for seven sections of this report [de

HelmholtzZentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt. Annual report 2011; HelmholtzZentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt. Jahresbericht 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-11-01

The contribution under consideration is the annual report 2011 of the German Research Centre for Environmental Health (HelmholtzZentrum Munich, Federal Republic of Germany). The most important component of this annual report are the scientific highlights according to the following topics: (1) Systems researches for the health (M. Hrabe de Angelis); (2) Mechanisms of the interaction between genes and environment (M. Goetz); (3) Research of the metabolism (M. Tschoep); (4) Research of lungs and allergies (O. Eickelberg); (5) Technologies for the bio medicine (V. Ntziachristos); (6) Natural basis of existence (J. Durner).

Micro-CT at the imaging beamline P05 at PETRA III

International Nuclear Information System (INIS)

Wilde, Fabian; Ogurreck, Malte; Greving, Imke; Hammel, Jörg U.; Beckmann, Felix; Hipp, Alexander; Lottermoser, Lars; Khokhriakov, Igor; Lytaev, Pavel; Dose, Thomas; Burmester, Hilmar; Müller, Martin; Schreyer, Andreas

2016-01-01

The Imaging Beamline (IBL) P05 is operated by the Helmholtz-Zentrum Geesthacht and located at the DESY storage ring PETRA III. IBL is dedicated to X-ray full field imaging and consists of two experimental end stations. A micro tomography end station equipped for spatial resolutions down to 1 µm and a nano tomography end station for spatial resolutions down to 100 nm. The micro tomography end station is in user operation since 2013 and offers imaging with absorption contrast, phase enhanced absorption contrast and phase contrast methods. We report here on the current status and developments of the micro tomography end station including technical descriptions and show examples of research performed at P05.

IFMIF High Flux Test Module-Recent progress in design and manufacturing

International Nuclear Information System (INIS)

Leichtle, D.; Arbeiter, F.; Dolensky, B.; Fischer, U.; Gordeev, S.; Heinzel, V.; Ihli, T.; Lang, K.-H.; Moeslang, A.; Simakov, S.P.; Slobodchuk, V.; Stratmanns, E.

2008-01-01

The International Fusion Material Irradiation Facility (IFMIF) is an accelerator driven neutron source for irradiation tests of candidate fusion reactor materials. Within the High Flux Test Module (HFTM) a testing volume of 0.5 l filled by qualified small scale specimens will be irradiated at displacement rates of 20-50 dpa/fpy in structural materials. The Forschungszentrum Karlsruhe (FZK) has developed a HFTM design which closely follows the design premise of maximising the space available for irradiation specimens in the IFMIF high flux zone and in addition allows keeping the temperature nearly constant in the rigs containing the specimen. Complementary analyses on nuclear, thermo-hydraulics and mechanical performance of the HFTM were performed to optimize the design. The present paper highlights the main design characteristics as well as recent progress achieved in this area. The contribution also includes (i) recommendations for the use of container, rig and capsule materials, and (ii) a description of the fabrication routes for the entire HFTM including brazing and filling procedures which are currently under development at the Forschungszentrum Karlsruhe

IFMIF High Flux Test Module-Recent progress in design and manufacturing

Energy Technology Data Exchange (ETDEWEB)

Leichtle, D. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Reaktorsicherheit, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)], E-mail: leichtle@irs.fzk.de; Arbeiter, F.; Dolensky, B.; Fischer, U.; Gordeev, S.; Heinzel, V.; Ihli, T.; Lang, K.-H. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Reaktorsicherheit, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Moeslang, A. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Materialforschung, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Simakov, S.P.; Slobodchuk, V.; Stratmanns, E. [Association FZK-EURATOM, Forschungszentrum Karlsruhe, Institut fuer Reaktorsicherheit, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)

2008-12-15

The International Fusion Material Irradiation Facility (IFMIF) is an accelerator driven neutron source for irradiation tests of candidate fusion reactor materials. Within the High Flux Test Module (HFTM) a testing volume of 0.5 l filled by qualified small scale specimens will be irradiated at displacement rates of 20-50 dpa/fpy in structural materials. The Forschungszentrum Karlsruhe (FZK) has developed a HFTM design which closely follows the design premise of maximising the space available for irradiation specimens in the IFMIF high flux zone and in addition allows keeping the temperature nearly constant in the rigs containing the specimen. Complementary analyses on nuclear, thermo-hydraulics and mechanical performance of the HFTM were performed to optimize the design. The present paper highlights the main design characteristics as well as recent progress achieved in this area. The contribution also includes (i) recommendations for the use of container, rig and capsule materials, and (ii) a description of the fabrication routes for the entire HFTM including brazing and filling procedures which are currently under development at the Forschungszentrum Karlsruhe.

Thermalhydraulic and material specific investigations into the realization of an Accelerator Driven System (ADS) to transmute minor actinides. 1999 Status report

International Nuclear Information System (INIS)

Knebel, J.U.; Cheng, X.; Mueller, G.; Schumacher, G.; Konys, J.; Wedemeyer, O.; Groetzbach, G.; Carteciano, L.

2000-10-01

At Forschungszentrum Karlsruhe an HGF Strategy Fund Project entitled ''Thermalhydraulic and Material Specific Investigations into the Realization of an accelerator-driven system (ADS) to Transmute Minor Actinides'' is performed which is funded by the Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren (HGF) in the section ''Energy Research and Energy Technology'' over a time period from 07/1999 to 06/2002 with a financial support of 7.0 million DM (35 man years). The objective of this HGF Strategy Fund Project is the development of new methods and technologies to design and manufacture thin-walled thermally highly-loaded surfaces (e.g. beam window) which are cooled by a corrosive heavy liquid metal (lead-bismuth eutectic). The beam window is a vital component of an ADS spallation target. The results of this project will provide the scientific-technical basis which allows the conception and the design of an ADS spallation target and later on a European Demonstrator of an ADS system. The work performed at Forschungszentrum Karlsruhe is embedded in a broad European research and development programme on ADS systems. (orig.)

Management of aging in technical facilities of E.ON Kernkraft plants; Alterungsmanagement bei technischen Einrichtungen in Anlagen der E.ON Kernkraft GmbH

Energy Technology Data Exchange (ETDEWEB)

Reese, Sven H.; Brast, Gerhard [E.ON Kernkraft GmbH, Hannover (Germany); Schoeckle, Friedrich [AMTEC Messtechnischer Service GmbH, Lauffen/N (Germany)

2009-11-15

The publication explains, by means of specific measures, the management of aging in technical facilities as practiced in the plants of E.ON Kernkraft GmbH. First, the historical background is outlined and the reasons for introducing management of aging in order to limit and control factors influencing the lifetime of nuclear power plants are described. This is followed by a definition of management of aging in important safety-related facilities as against lifetime management of technical systems relevant to plant availability. This is the context in which the scope of the survey of continuous management of aging is defined in respect of physical aging. A classification is then made in accordance with the staggered requirements to be met in the quality of technical facilities. On the basis of the quality to be assured, the different component groups are assigned corresponding operational measures and explained. These continuous measures extend from failure-oriented maintenance to preventive maintenance to the integrity concept for technical installations. To document the findings and evaluate the effectiveness of the measures taken, the integration of the process is described and reference is made to continuous optimization according to PDCA principles. The explicit introduction of the process of management of aging creates a platform which allows a documentation to be accumulated of the manifold and comprehensive measures taken to control phenomena of aging in technical installations. (orig.)

Sensitivity mapping of the German North Sea Coast II. Data update and development of an operational model for precaution measures of oil spill response; Sensititivaetsraster Deutsche Nordseekueste II. Aktualisierung und Erstellung eines operationellen Modells zur Vorsorgeplanung bei der Oelbekaempfung

Energy Technology Data Exchange (ETDEWEB)

Bernem, K.H. van; Doerffer, R.; Heymann, K.; Kleeberg, U.; Krasemann, H.; Schiller, H. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Kuestenforschung; Grohnert, A.; Reichert, J. [IfaB - Institut fuer Angewandte Biologie Freiburg/Niederelbe (Germany); Reichert, M. [ARCADIS, Rostock (Germany)

2007-07-01

The Wadden Sea is an area of tidal flats and salt marshes extending between the North Sea coasts of Denmark, Germany and the Netherlands. It has enormous value as a cleansing site for North Sea water, as a nursery for young fish and as a feeding ground for many bird species. Due to the proximity of important shipping routes and harbours, this region is especially threatened by oil spills. Thus, for oil spill response and precaution measures, a sensitivity study of the entire intertidal area was badly needed in order to assess and minimize the potential ecological and economical damage. Based on comprehensive field surveys and in close cooperation with the Central Command for Maritime Emergencies, an automated expert-model for the german part of Wadden Sea areas was developed at the Institute for Coastal Research (GKSS-Research Centre). As an operational model it will serve as important instrument for decision making processes, precautionary measures and the further design of oil spill response strategies. Since it is not possible to protect the entire German North Sea coast equally at all levels, oil spill contingency planning requires a more detailed classification. For this reason, individual soft bottom habitats, communities and stocks of saltmarshes, macrofauna, waterfowl and estuarine biotop types were evaluated and classified according to their vulnerability to oil pollution. Hence, the fieldwork for habitat mapping during 2003-2006 was a central part of the study. For this part, the experiences and results obtained from the previous GKSS-project ''Thematic mapping and sensitivity study of Intertidal flats'' during the years 1987-1992 served as an valuable basis. For example, the documentation of changes during these periods of observation provides information on stability features of the ecosystems. During the first project nearly 5000 locations were processed and characterised using about 70 parameters for each site. The in-situ mapping

Stoner vs. spin-mixing behavior in the bulk magnetism of Gd: A spin ...

Indian Academy of Sciences (India)

bulk magnetism of Gd: A spin-resolved photoemission study. K MAITI1,2,∗. , M C MALAGOLI2, A DALLMEYER2 and C CARBONE2,3. 1Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai 400 005, India. 2Institut für Festkörperforschung, Forschungszentrum Jülich, D-52428 Jülich, Germany. 3Consiglio ...

NS OTTO HAHN - the first German nuclear ship

International Nuclear Information System (INIS)

1981-01-01

The NS OTTO HAHN is the first and only European nuclear propelled cargo and research vessel. She entered service in 1968 and was operated for 11 years without any technical failure. The essential experience and know-how about the nuclear propulsion unit is available now. Therefore the ship was decommissioned in 1979. Until the end of 1981 all activated and contaminated components will be removed and decontaminated. The ship can then be released for conventional utilization. In this book the NS OTTO HAHN is described in detail and the experiences of operation as well as research and development activities are reported. All earlier publications of GKSS on the same subject are listed. (orig.) [de

GASFLOW computer code (physical models and input data)

International Nuclear Information System (INIS)

Muehlbauer, Petr

2007-11-01

The GASFLOW computer code was developed jointly by the Los Alamos National Laboratory, USA, and Forschungszentrum Karlsruhe, Germany. The code is primarily intended for calculations of the transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containments and in other facilities. The physical models and the input data are described, and a commented simple calculation is presented

User-friendly software for SANS data reduction and analysis

International Nuclear Information System (INIS)

Biemann, P.; Haese-Seiller, M.; Staron, P.

1999-01-01

At the Geesthacht Neutron Facility (GeNF) a new software is being developed for the reduction of two-dimensional small-angle neutron scattering (SANS) data. The main motivation for this work was to created software for users of our SANS facilities that is easy to use. Another motivation was to provide users with software they can also use at their home institute. Therefore, the software is implemented on a personal computer running WINDOWS. The program reads raw data from an area detector in binary or ascii format and produces ascii files containing the scattering curve. The cross section can be averaged over the whole area of the detector or over users defined sectors only. Scripts can be created for processing large numbers of files. (author)

Status of FRJ-2 refurbishment of tank pipes and essential results of aging analysis

International Nuclear Information System (INIS)

Hansen, G.; Thamm, G.; Thome, M.

1993-01-01

An aging evaluation program for FRJ-2 (DIDO) of the Forschungszentrum Juelich GmbH has been developed and is currently executed in cooperation with the licensing and regulatory and TUV experts in order to determine the overall life expectancy of the facility and to identify critical systems and components that need to be upgraded or refurbished for future safe reactor operation. In Phase A (completed) a so called master list of the FRJ-2 mechanical, electrical and structural components was compiled on a system-by system basis and the operational documentation with respect to regular inspections, maintenance, repair and unusual occurences was carefully examined. Critical components were selected and their ageing respectively life limiting mechanisms identified. In Phase (currently under way) special inspections, examinations and tests for critical systems/components are being elaborated, executed and evaluated. Current work is being concentrated on non replaceable components (e.g. reactor aluminium tank (RAT) and the connecting pipes to the primary cooling circuit, the reactor steel tank and pipe work inside the concrete reactor block). As a consequence of first results of the aging evaluation program and due to leaks in the weir and drain pipes of the RAT a repair/refurbishment program was set up for the Al-RAT pipes (risers, downcomers weir and drain pipes) and the steel guide tubes. Details of the r/r program which is in far progress and first essential results of the aging evaluation will be presented. The results achieved until today are encouraging with respect to safe reactor operation on short and medium term. (author)

Status of FRJ-2 Refurbishment of tank pipes and essential results of aging analysis

International Nuclear Information System (INIS)

Hansen, G.; Thamm, G.; Thome, M.

1994-01-01

An aging evaluation program for FRJ-2 (DIDO) of the Forschungszentrum Juelich GmbH has been developed and is currently executed in cooperation with the licensing and regulatory and TUEV experts in order to determine the overall life expectancy of the facility and to identify critical systems and components that need to be upgraded or refurbished for future safe reactor operation. In Phase A (completed) a so called master list of the FRJ-2 mechanical, electrical and structural components was compiled on a system-by system basis and the operational documentation with respect to regular inspections, maintenance, repair and unusual occurrences was carefully examined. Critical components were selected and their ageing respectively life limiting mechanisms identified. In Phase B (currently under way) special inspections, examinations and tests for critical systems/components are being elaborated, executed and evaluated. Current work is being concentrated on non replaceable components (e.g. reactor aluminium tank (RAT) and the connecting pipes to the primary cooling circuit, the reactor steel tank and pipe work inside the concrete reactor block). As a consequence of first results of the aging evaluation program and due to leaks in the weir and drain pipes of the RAT a repair/refurbishment program was set up for the Al-RAT pipes (risers, downcomers, weir and drain pipes) and the steel guide tubes. Details of the r/r program which is in far progress and first essential results of the aging evaluation will be presented. The results achieved until today are encouraging with respect to safe reactor operation on short and medium term. (J.P.N.)

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development programme 1999

International Nuclear Information System (INIS)

1999-01-01

The Karlsruhe Research Center is a national research establishment placed under the responsibility of the Federal Republic of Germany and the Federal Land of Baden-Wuerttemberg, and as a member of the Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren belongs to the most important and independent research centers in Germany working in the fields of the natural sciences and engineering sciences. The center's research and development activities are defined in coordination with the policy and programmes of the two responsible Federal and Land Governments and span the range from pre-industrial research through to product and process development, research of a provident nature, and fundamental scientific research work, with almost all R and D activities of the center relating in one way or other to technology and the environment. The research programme of the center today covers subjects and aspects relating to the environment, energy, key technologies, and fundamental research, whereas at the time the center was founded, nuclear science and engineering was the dominating field of activities. The current spectrum of activities reflects the evolution in the past and is characterized by a great complexity of problems involved, which requires cross-disciplinary cooperation, and foresight in the definition of tasks and time horizons. (orig./CB) [de

1-cycle SANEX process development studies performed at Forschungszentrum Juelich

International Nuclear Information System (INIS)

Wilden, Andreas; Sypula, Michal; Schreinemachers, Christian; Kluxen, Paul; Modolo, Giuseppe

2010-01-01

In the framework of our research activities related to the partitioning of spent nuclear fuel solutions, the direct selective extraction of trivalent actinides from a simulated PUREX raffinate solution (1-cycle SANEX) was studied using a mixture of CyMe 4 BTBP and TODGA. The solvent showed a high selectivity for trivalent actinides with a high lanthanide separation factor. However the co-extraction of some fission products, such as Cu, Ni, Zr, Mo, Pd, Ag and Cd was observed. The extraction of Zr and Mo could be suppressed using oxalic acid but the use of the well-known Pd complexant HEDTA was unsuccessful. During screening experiments with different amino acids, the sulphur-bearing amino acid L-Cysteine showed good complexation of Pd and prevented its extraction into the organic phase without influencing the extraction of trivalent actinides. A strategy for a single-cycle process is proposed within this paper. (authors)

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development program 2002

International Nuclear Information System (INIS)

2001-01-01

The five main fields of research and the activities under the R and D program 2002 are explained in great detail in five chapters with the following captions: 1. ENVIRONMENT. Programs: - Sustainable development, energy and environmental engineering (UMWELT). - Earth atmosphere and climate research (ATMO). 2. PUBLIC HEALTH. Programs: - Biomedical research (BIOMED). - Medical engineering (MEDTECH). 3. ENERGY. Programs: - Thermonuclear fusion (FUSION). - Nuclear safety (NUKLEAR). 4. KEY TECHNOLOGIES. Programs: - Microsystems engineering (MIKRO). - Nanotechnology (NANO). - Materials science (MATERIAL). - Chemical process engineering (CHEMIE). - Superconductivity (SUPRA). 5. MATTER and STRUCTURE. Program: The structure of matter (STRUKTUR). The sixth chapter presents cross-cutting activities under the program: Technology transfer and marketing (TTM). The concluding chapter lists and briefly presents the activities of the scientific and technical institutes of the Karlsruhe Research Center. (CB) [de

Forschungszentrum Rossendorf, Institut fuer Ionenstrahlphysik und Materialforschung. Annual report 1993

International Nuclear Information System (INIS)

Moeller, W.; Wieser, E.; Kirch, S.

1994-04-01

Highlights were: Ion beam induced epitaxial crystallization of 6H-SiC -Band gap engineering in Co alloyed β-FeSi 2 formed by ion beam synthesis -Formation of CoSi 2 wires by maskless implantation with the focused ion beam -Phosphorus implanted n + -layers for HPGe - Development of a fluidic ISFET microsystem for chemical analysis - Depth selective Moessbauer spectroscopy of Al-implanted iron - Plasma source ion implantation - Simultaneous light element analysis by HIERD for plasma-wall interaction studies in fusion research -Paint layer studies using PIXE on air - Texture investigation on geological three phase samples - status of the Rossendorf 7.25 GHz ECR ion source -Formation of double-height Si(001) steps by sputtering with Xe ions - a computer simulation - Self-organisation during Ostwald ripening in ion beam synthesis of buried compound layers - Modification of metals and other materials - Modification of semiconductors and patterning by focused ion beam -Application of ion beams to sensors - Ion beam analysis, fundamentals of ion-solid-interaction and accelerator technique - Structural research. (orig./HP)

MobileCoDaC – A transportable control, data acquisition and communication infrastructure for Wendelstein 7-X

International Nuclear Information System (INIS)

Hennig, Christine; Bluhm, Torsten; Kühner, Georg; Laqua, Heike; Lewerentz, Marc; Müller, Ina; Pingel, Steffen; Riemann, Heike; Schacht, Jörg; Spring, Anett; Werner, Andreas; Wölk, Andreas

2014-01-01

Highlights: • MobileCoDaC is a transportable CoDaC infrastructure for Wendelstein 7-X. • It allows in situ testing and commissioning of components to be used at W7-X by providing W7-X CoDaC infrastructure. • It has been used successfully for test and commissioning of the HEXOS diagnostic at Forschungszentrum Jülich. - Abstract: MobileCoDaC is a test bed allowing in situ testing and commissioning the control and data acquisition of components to be operated at Wendelstein 7-X. It is a minimized replica of the functionality of the complete W7-X CoDaC infrastructure and can be operated independently. MobileCoDaC contains a set of W7-X CoDaC servers, network infrastructure, and accessories for remote access. All hardware is mounted in a single transportable rack system. Moreover, it provides the software infrastructure and user applications for experiment preparation, experiment operation, trouble shooting and experiment data access. MobileCoDaC has been operated successfully for test and commissioning of the control and data acquisition of the HEXOS (high efficiency extreme ultraviolet overview spectrometer) diagnostic at Forschungszentrum Jülich

Availability measurement of grid services from the perspective of a scientific computing centre

International Nuclear Information System (INIS)

Marten, H; Koenig, T

2011-01-01

The Karlsruhe Institute of Technology (KIT) is the merger of Forschungszentrum Karlsruhe and the Technical University Karlsruhe. The Steinbuch Centre for Computing (SCC) was one of the first new organizational units of KIT, combining the former Institute for Scientific Computing of Forschungszentrum Karlsruhe and the Computing Centre of the University. IT service management according to the worldwide de-facto-standard 'IT Infrastructure Library (ITIL)' was chosen by SCC as a strategic element to support the merging of the two existing computing centres located at a distance of about 10 km. The availability and reliability of IT services directly influence the customer satisfaction as well as the reputation of the service provider, and unscheduled loss of availability due to hardware or software failures may even result in severe consequences like data loss. Fault tolerant and error correcting design features are reducing the risk of IT component failures and help to improve the delivered availability. The ITIL process controlling the respective design is called Availability Management. This paper discusses Availability Management regarding grid services delivered to WLCG and provides a few elementary guidelines for availability measurements and calculations of services consisting of arbitrary numbers of components.

Kernkraftwerk Obrigheim GmbH. Annual report 1989

International Nuclear Information System (INIS)

Koerner, C.

1990-01-01

The Obrigheim nuclear power station was operated at full load during the year 1989: 7.756 operating hours produced electrical energy of 2.689 GWh. This is the fifth best annual result during Obrigheim's operating period. Since commissioning in October 1968, 154.866 hours of operation have generated 52.125 GWh (gross) and from test operation in March 1969 until the end of 1989, 154.086 hours of operation have generated 52.013 GWh. This is an availability of power of 82.1% in this period and a time availability of 84.4%. In 1988, the plant was shut down for 927 hours for the 20th refueling including testing, inspection and repair work. Apart from refueling, the plant had a good time availability and therefore contributed 5% to the safe, economical and environmentally acceptable electricity supply of the Land Baden-Wuerttemberg. The power station is of great significance to the region, both in terms of power supply and the economy. (orig.) [de

Kernkraftwerk Obrigheim GmbH. Annual report 1990

International Nuclear Information System (INIS)

Koerner, C.

1991-01-01

The Obrigheim nuclear power station was operated at full load from January 1 through May 25, 1990, generating 1.236 GWh of electrical energy in 3.475 operating hours. The Obrigheim nuclear power station thus achieved during this period of 145 days in 1990 an operating availability of 100%. Since its commissioning in October 1968, the Obrigheim reactor station has been operating for 158.341 hours, generating 53.361 GWh (gross), and from test operation started in March 1969 up to the end of 1990, all in all 53.249 GWh have been generated in 157.561 operating hours, which means an availability time ratio of 82.3 %, and a capacity factor of 80.1%. The plant was shut down in 1990 for the 21st refuelling operation including inspection and repair work, for a fictitious period of 942 hours. In addition, power operation was stopped by an order of the supervisory authority for another 4.343 hours, so that the plant remained disconnected from the grid between May 26 and December 31, 1990. In the first part of the year 1990, until May 26, the plant had an excellent availability time ratio and thus contributed about 2.5% of the safe, economic and environmentally sound electricity supplies in Baden-Wuerttemberg. (orig./HP) [de

Multi-stage-flash desalination plants of relative small performance with integrated pressurized water reactors as a nuclear heat source

International Nuclear Information System (INIS)

Petersen, G.; Peltzer, M.

1977-01-01

In the Krupp-GKSS joint study MINIPLEX the requirements for seawater-desalination plants with a performance in the range of 10 000 to 80 000 m 3 distillate per day heated by a nuclear reactor are investigated. The reactor concept is similar to the Integrated Pressurized Water Reactor (IPWR) of the nuclear ship OTTO HAHN. The design study shows that IPWR systems have specific advantages up to 200 MWth compared to other reactor types at least being adapted for single- and dual-purpose desalination plants. The calculated costs of the desalinated water show that due to fuel cost advantages of reactors small and medium nuclear desalination plants are economically competetive with oil-fired plants since the steep rise of oil price in autumn 1973. (author)

Hybrid friction diffusion bonding of 316L stainless steel tube-to-tube sheet joints for coil-wound heat exchangers

Energy Technology Data Exchange (ETDEWEB)

Haneklaus, Nils; Cionea, Cristian; Reuven, Rony; Frazer, David; Hosemann, Peter; Peterson, Per F. [Dept of Nuclear Engineering, University of California, Berkeley (United States)

2016-11-15

Hybrid friction diffusion bonding (HFDB) is a solid-state bonding process first introduced by Helmholtz-Zentrum Geesthacht to join aluminum tube-to-tube sheet joints of Coil-wound heat exchangers (CWHE). This study describes how HFDB was successfully used to manufacture 316L test samples simulating tube-to-tube sheet joints of stainless steel CWHE for molten salt coolants as foreseen in several advanced nuclear- and thermal solar power plants. Engineering parameters of the test sample fabrication are presented and results from subsequent non-destructive vacuum decay leak testing and destructive tensile pull-out testing are discussed. The bonded areas of successfully fabricated samples as characterized by tube rupture during pull-out tensile testing, were further investigated using optical microscopy and scanning electron microscopy including electron backscatter diffraction.

Recommendations for J and CTOD testing of strength mismatched. GKSS and EDF view

Energy Technology Data Exchange (ETDEWEB)

Kocak, M.; Kim, Y.J.; Hornet, P

1998-03-01

Recommendations for toughness testing and evaluation procedures for weldments are given in this paper. For testing aspects, two testing methods are outlined, micro-flat tensile tests and the {delta}{sub 5} testing technique. The micro-flat tensile tests are extremely useful to measure tensile properties for the Heat Affected Zone (HAZ) of multipass welds and very thin weld regions such as laser beam or electron beam and it is rather universal. It can be applied to any type of test pieces as well as to structural components with surface breaking cracks. These two test methods can provide efficient tools for tensile and fracture testing of metallic materials joined by fusion welding technology including high power beam welding processes. For toughness evaluation aspects, the J estimation procedures for mismatched specimens are reviewed, including a summary of a new proposal for best estimates of the mismatch on the J integral. The new procedure covers not only weld metal cracks but also HAZ cracks. Finally some recommendations are given for further development. (author) 29 refs.

Fallstudie Brose Fahrzeugtechnik GmbH & Co. KG - Verbesserung des Anfrageprozesses im Einkauf der Brose Fahrzeugtechnik GmbH & Co. KG

OpenAIRE

Senger, Enrico; Österle, Hubert

2003-01-01

Die Brose Fahrzeugtechnik liefert Fensterheber, Türschlösser, Türsysteme und Sitzverstel-lungen an die Automobilindustrie. Sie realisierte einen kooperativen Anfrageprozess mit ihren externen Zulieferern und ihren drei internen in die Beschaffung involvierten Bereiche (Zentraleinkauf, Kundenteameinkäufer und Werkseinkauf). Die Anfragen gehen von den internen Bereichen elektronisch an die potentiellen Lieferanten. Im Gegensatz zu früher besitzen alle internen Bereiche vollständige Transparenz ...

International Conference (4th) on Nanostructured Materials Held in Stockholm, Sweden on 14-19 June 1998. Book of Abstracts

Science.gov (United States)

1998-06-19

de Fisica de Sistemas, Spain Forschungszentrum Karlsruhe, Germany Univ. of Delaware, USA EPFL, Switzerland Tohoku University, Japan Virginia...Dominguez2, E.Roldan2, J.Campora3, P. Palma3 and A. Fernandez! institute de Ciencia de Materiales de Sevilla, Centra de Investigaciones Cintificas...34Isk de la Cartuja", Avda. Americo Vespucio s/n, 41092-Sevilla, SPAIN <asuncion@cica.es: 2Depto. de Qufmica- Fisica , Universidad de Sevilla,

Ein Kredit für Weihnachtsbaumkugeln

Science.gov (United States)

Tutsch, Sina

Eine Mathematikerin aus dem DFG-Forschungszentrum Matheon arbeitet an Methoden zur dreidimensionalen Visualisierung. Sie hat die Geschäftsidee, Weihnachtsbaumkugeln mit bewegten Hologrammen herzustellen, die sich individuell gestalten lassen, und plant eine Existenzgründung. Aus einem öffentlichen Förderprogramm erhält sie ein günstiges Darlehen in Höhe von 50 000 Euro. Für die Startphase ihres Unternehmens benötigt sie jedoch den vierfachen Betrag.

Implementierung einer Visualisierungsanwendung für Apples iOS

OpenAIRE

Felder, Christian

2011-01-01

Am Peter Grünberg Institut sowie am Jülich Centre for Neutron Science (JCNS) des Forschungszentrums Jülich ist schon seit Jahren eine standardisierte Grafikbibliothek im Einsatz, die auf einer Implementierung des grafischen Kernsystems (GKS) basiert. Zahlreiche Anwendungen und Programmschnittstellen aus dem Bereich der Instrumentierungs-, Simulations- und Auswertesoftware wurden auf der Basis dieser Bibliothek entwickelt, die sowohl von höhereren Programmiersprachen als auch gängigen Interpre...

A new plant chamber facility PLUS coupled to the atmospheric simulation chamber SAPHIR

Science.gov (United States)

Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

2015-11-01

A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been build and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees are mixed with synthetic air and are transferred to the SAPHIR chamber where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOC) can be studied in detail. In PLUS all important enviromental parameters (e.g. temperature, PAR, soil RH etc.) are well-controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leafes of the plants is constructed such that gases are exposed to FEP Teflon film and other Teflon surfaces only to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 LED panels which have an emission strength up to 800 μmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOC) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light and temperature dependent BVOC emissions are studied using six Quercus Ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus Ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental set up and the utility of the newly added plant chamber.

A new plant chamber facility, PLUS, coupled to the atmosphere simulation chamber SAPHIR

Science.gov (United States)

Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

2016-03-01

A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been built and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow-through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees is mixed with synthetic air and transferred to the SAPHIR chamber, where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOCs) can be studied in detail. In PLUS all important environmental parameters (e.g., temperature, photosynthetically active radiation (PAR), soil relative humidity (RH)) are well controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leaves of the plants is constructed such that gases are exposed to only fluorinated ethylene propylene (FEP) Teflon film and other Teflon surfaces to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 light-emitting diode (LED) panels, which have an emission strength up to 800 µmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOCs) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light- and temperature- dependent BVOC emissions are studied using six Quercus ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental setup and the utility of the newly added plant chamber.

Analytical support for the preparation of bundle test QUENCH-10 on air ingress

International Nuclear Information System (INIS)

Birchley, J.; Haste, T.; Homann, C.; Hering, W.

2005-07-01

Bundle test QUENCH-10 is dedicated to study air ingress with subsequent water quench during a supposed accident in a spent fuel storage tank. It was proposed by AEKI, Budapest, Hungary and was performed on 21 July 2004 in the QUENCH facility at Forschungszentrum Karlsruhe. Preparation of the test is based on common analytical work at Forschungszentrum Karlsruhe and Paul Scherrer Institut, Villigen, Switzerland, mainly with the severe accident codes SCDAP/RELAP5 and MELCOR, to derive the protocol for the essential test phases, namely pre-oxidation, air ingress and quench phase. For issues that could not be tackled by this computational work, suggestions for the test conduct were made and applied during the test. Improvements of the experimental set-up and the test conduct were suggested and largely applied. In SCDAP/RELAP5, an error was found: for thick oxide scales, the output value of the oxide scale is sensibly underestimated. For the aims of the test preparation, its consequences could be taken into account. Together with the related computational and other analytical support by the engaged institutions the test is co-financed as test QUENCH-L1 by the European Community under the Euratom Fifth Framework Programme on Nuclear Fission Safety 1998 - 2002 (LACOMERA Project, contract No. FIR1-CT2002-40158). (orig.)

Validated design of the ITER main vacuum pumping systems

International Nuclear Information System (INIS)

Day, Chr.; Antipenkov, A.; Dremel, M.; Haas, H.; Hauer, V.; Mack, A.; Boissin, J.-C.; Class, G.; Murdoch, D.K.; Wykes, M.

2005-01-01

Forschungszentrum Karlsruhe is developing the ITER high vacuum cryogenic pumping systems (torus, cryostat, NBI) as well as the corresponding mechanical roughing pump trains. All force-cooled big cryopumps incorporate similar design of charcoal coated cryopanels cooled to 5 K with supercritical helium. A model of the torus exhaust cryopump was comprehensively characterised in the TIMO testbed at Forschungszentrum. This paper discusses the vacuum performance results of the model pump and outlines how these data were incorporated in a sound design of the whole ITER torus exhaust pumping system. To do this, the dedicated software package ITERVAC was developed which is able to describe gas flow in viscous, transitional and molecular flow regimes as needed for the gas coming through the divertor slots and along the pump ducts into the cryopumps. The entrance section between the divertor cassettes and each pumping duct was identified to be the bottleneck of the gas flow. The interrelation of achievable throughputs as a function of the divertor pressure and the cryopump pumping speed is discussed. The system design is completed by assessment of the NBI cryopump system and integrating performance curves for the roughing pump trains needed during the regeneration phases of the cryopumps. (author)

500 MHz narrowband beam position monitor electronics for electron synchrotrons

International Nuclear Information System (INIS)

Mohos, I.; Dietrich, J.

1998-01-01

Narrowband beam position monitor electronics were developed in the Forschungszentrum Juelich-IKP for the orbit measurement equipment used at ELSA Bonn. The equipment uses 32 monitor chambers, each with four capacitive button electrodes. The monitor electronics, consisting of an rf signal processing module (BPM-RF) and a data acquisition and control module (BPM-DAQ), sequentially process and measure the monitor signals and deliver calculated horizontal and vertical beam position data via a serial network

Experiments on the quench behavior of fuel rods

International Nuclear Information System (INIS)

Hofmann, P.; Noack, V.; Burbach, J.; Metzger, H.

1995-01-01

Because of the importance of the observed reflood phenomena for safety of current and future LWRs, the Forschungszentrum Karlsruhe (FZKA) started a program to investigate the mechanisms of quench-induced oxidation of Zircaloy. A small scale test-rig was designed and built in which it is possible to quench single Zircaloy rods by water and steam. The report describes the status of this work in May 1995. Some experimental results are presented. (orig./HP)

Experiments on the quench behavior of fuel rods

Energy Technology Data Exchange (ETDEWEB)

Hofmann, P.; Noack, V.; Burbach, J.; Metzger, H.

1995-08-01

Because of the importance of the observed reflood phenomena for safety of current and future LWRs, the Forschungszentrum Karlsruhe (FZKA) started a program to investigate the mechanisms of quench-induced oxidation of Zircaloy. A small scale test-rig was designed and built in which it is possible to quench single Zircaloy rods by water and steam. The report describes the status of this work in May 1995. Some experimental results are presented. (orig./HP)

Beryllium irradiation embrittlement test programme. Material and specimen specification, manufacture and qualification

International Nuclear Information System (INIS)

Harries, D.R.; Dalle Donne, M.

1996-06-01

The report presents the specification, manufacture and qualification of the beryllium specimens to be irradiated in the BR2 reactor in Mol to investigate the effect of the neutron irradiation on the embrittlement as a function of temperature and beryllium oxide content. This work was been performed in the framework of the Nuclear Fusion Project of the Forschungszentrum Karlsruhe and is supported by the European Union within the European Fusion Technology Program. (orig.)

Ion diode diagnostics to resolve beam quality issues

Energy Technology Data Exchange (ETDEWEB)

Bluhm, H; Buth, L; Hoppe, P [Forschungszentrum Karlsruhe (Germany). Institut fuer Neutronenphysik und Reaktortechnik; and others

1997-12-31

Various diagnostic methods and instruments are under development at the Forschungszentrum Karlsruhe to measure important physical quantities in the accelerating gap of high power diodes on KALIF with a high spatial and temporal resolution. The methods include optical spectroscopy, refractive index measurements, dispersion interferometry, and high resolution energy analysis. The setup of these diagnostic tools and the first results obtained for applied and self-magnetically insulated diodes are presented. (author). 6 figs., 5 refs.

500 MHz narrowband beam position monitor electronics for electron synchrotrons

Science.gov (United States)

Mohos, I.; Dietrich, J.

1998-12-01

Narrowband beam position monitor electronics were developed in the Forschungszentrum Jülich-IKP for the orbit measurement equipment used at ELSA Bonn. The equipment uses 32 monitor chambers, each with four capacitive button electrodes. The monitor electronics, consisting of an rf signal processing module (BPM-RF) and a data acquisition and control module (BPM-DAQ), sequentially process and measure the monitor signals and deliver calculated horizontal and vertical beam position data via a serial network.

Forschungszentrum Rossendorf, Institute of Nuclear and Hadronic Physics. Annual report 1993

International Nuclear Information System (INIS)

Doenau, F.; Prade, H.

1994-03-01

The theoretical investigations performed in 1993 dealt with the study of nuclear and subnuclear degrees of freedom, high-spin phenomena and the dynamics of open quantum systems. The results of the research and developments are presented in numerous publications, conference contributions and talks. Experimental data are obtained from in-beam spectroscopic studies, medium energy physics and heavy ion physics. The participation in national or international research projects has been continued. (orig.)

Forschungszentrum Rossendorf, Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 1995

International Nuclear Information System (INIS)

Johannsen, B.

1996-02-01

Research at the Institute of Bioinorganic and Radiopharmaceutical Chemistry of the Research Center Rossendorf is focused on radiotracers as molecular probes for diagnosis of disease. The research effort has two main components: -Positron emission tomography (PET) - technetium chemistry and radiopharmacology. The research activities of the Institute have been performed in three administratively classified groups. A PET tracer group is engaged in the chemistry and radiopharmacy of 11 C and 18 F compounds and in the setup of the PET center. A SPECT tracer group deals with the design, synthesis and chemical characterization of metal coordination compounds, primarily rhenium and technetium complexes. A biochemical group is working on SPECT and PET-relevant biochemical and biological projects. This includes the characterization and assessment of new compounds developed in the two synthetically oriented groups. The annual report presented here covers the research activities of the Institute of Bioinorganic and Radiopharmaceutical Chemistry in 1995. (orig.)

Decommissioning of NS OTTO HAHN

International Nuclear Information System (INIS)

Lettnin, H.K.J.; Viecenz, H.J.

1982-01-01

With NS OTTO HAHN for the first time a nuclear propelled merchant vessel has been regularly decommissioned after more than 10 years of successful operation. Based on the concept of the total decontamination about 1100 ts of contaminated and decontaminated components have been dismantled and removed from board ship. 260 ts of contaminated components packed in 10 ft containers and 400-liter drums and the 480 ts RPV unit are stored at the GKSS site for post investigations. A total mass of about 370 ts has been decontaminated by mechanical and chemical procedures below the required radiological limits. The nuclear status of OTTO HAHN has been removed by the competent licensing authority in June 1982 so that the vessel is now offered for sale for conventionel operations. 8 references, 11 figures

Production and characterization of monodisperse uranium particles for nuclear safeguards applications

International Nuclear Information System (INIS)

Knott, Alexander

2016-01-01

Environmental sampling is a very effective measure to detect undeclared nuclear activities. Generally, samples are taken as swipe samples on cotton. These swipes contain minute quantities of particulates which have an inherent signature of their production and release scenario. These inspection samples are assessed for their morphology, elemental composition and their isotopic vectors. Mass spectrometry plays a crucial role in determining the isotopic ratios of uranium. Method validation and instrument calibration with well-characterized quality control (QC)-materials, reference materials (RMs) and certified reference materials (CRMs) ensures reliable data output. Currently, the availability of suitable well defined microparticles containing uranium and plutonium reference materials is very limited. Primarily, metals, oxides and various uranium and plutonium containing solutions are commercially available. Therefore, the IAEA's Safeguards Analytical Services (SGAS) cooperates with the Institute of Nuclear Waste Management and Reactor Safety (IEK-6) at the Forschungszentrum Juelich GmbH in a joint task entitled ''Production of Particle Reference Materials''. The work presented in this thesis has been partially funded by the IAEA, Forschungszentrum Juelich GmbH and the Federal Ministry of Economic Affairs and Energy (BMWi) through the ''Joint Program on the Technical Development and Further Improvement of IAEA Safeguards between the Government of the Federal Republic of Germany and the IAEA''. The first step towards monodisperse microparticles was the development of pure uranium oxide particles made from certified reference materials. The focus of the dissertation is (1) the implementation of a working setup to produce monodisperse uranium oxide particles and (2) the characterization of these particles towards the application as QC-material. Monodisperse uranium oxide particles were produced by spray pyrolysis. It was demonstrated that the particle size can be

Production and characterization of monodisperse uranium particles for nuclear safeguards applications

Energy Technology Data Exchange (ETDEWEB)

Knott, Alexander

2016-07-01

Environmental sampling is a very effective measure to detect undeclared nuclear activities. Generally, samples are taken as swipe samples on cotton. These swipes contain minute quantities of particulates which have an inherent signature of their production and release scenario. These inspection samples are assessed for their morphology, elemental composition and their isotopic vectors. Mass spectrometry plays a crucial role in determining the isotopic ratios of uranium. Method validation and instrument calibration with well-characterized quality control (QC)-materials, reference materials (RMs) and certified reference materials (CRMs) ensures reliable data output. Currently, the availability of suitable well defined microparticles containing uranium and plutonium reference materials is very limited. Primarily, metals, oxides and various uranium and plutonium containing solutions are commercially available. Therefore, the IAEA's Safeguards Analytical Services (SGAS) cooperates with the Institute of Nuclear Waste Management and Reactor Safety (IEK-6) at the Forschungszentrum Juelich GmbH in a joint task entitled ''Production of Particle Reference Materials''. The work presented in this thesis has been partially funded by the IAEA, Forschungszentrum Juelich GmbH and the Federal Ministry of Economic Affairs and Energy (BMWi) through the ''Joint Program on the Technical Development and Further Improvement of IAEA Safeguards between the Government of the Federal Republic of Germany and the IAEA''. The first step towards monodisperse microparticles was the development of pure uranium oxide particles made from certified reference materials. The focus of the dissertation is (1) the implementation of a working setup to produce monodisperse uranium oxide particles and (2) the characterization of these particles towards the application as QC-material. Monodisperse uranium oxide particles were produced by spray pyrolysis. It was

Main Achievements 2003-2004 - Nuclear Physics

International Nuclear Information System (INIS)

2005-01-01

Two Departments of our Institute are engaged in nuclear studies, in the following areas: studies of the nuclear reaction mechanism at low, intermediate and high energies, studies of nuclear structure by means of gamma spectroscopy, and theoretical research concerning nuclear structure and reaction mechanisms. Most of these studies are carried out in the form of international collaborations with the world-leading nuclear physics experimental facilities. Our physicists usually play an important role in these collaborative projects and often lead them. Nuclear structure experiments were performed mainly within the following European Large Scale Facilities: ALPI-INFN-Legnaro, VIVITRONIReS-Strasbourg, UNILAC/SIS-GSI-Darmstadt, K100-Cyclotron-Jyvaeskylea with the use of the GASP, GARFIELD, EUROBALL, ICARE, RISING + FRS, RITU+JUROGAM systems and with the application of RFD, HECTOR, DIAMANT, EUCLIDES ancillary detectors. Experimental data were also obtained at the Argonne National Laboratory, USA, with the GAMMASPHERE array and the ATLAS accelerator. In addition, we are involved in planning the experiments for the project of international accelerator facility of the next generation FAIR (Facility for Antiproton and Ion Research) at GSI. The nuclear reaction experiments were performed at the Joint Institute of Nuclear Physics in Dubna (collaborations FASA and COMBAS), in GANIL in Caen, in the Forschungszentrum Juelich at the accelerator COSY in the framework of collaboration PISA, as well as at the Warsaw Laboratory of Heavy Ions. The hadronic nuclear physics experiments were carried out exclusively at the Forschungszentrum Juelich where we have participated in international collaborations COSY11, GEM and HIRES. Recently, we have joined international detector project WASA planned at Forschungszentrum Juelich and plan to participate in the project PANDA, being constructed in GSI Darmstadt. Both detectors will be devoted to low and intermediate hadronic physics. We also

Hydrochemical and geochemical processes in superficial dump sediments in Zwenkau open brown coal mine; Hydro- und geochemische Prozesse in oberflaechennahen Kippensedimenten des Braunkohlentagebaus Zwenkau

Energy Technology Data Exchange (ETDEWEB)

Wiegand, U.

2002-07-01

The present study was performed as part of a project titled ''Ground and air-based spectrometric studies for the differentiation of reactively altered brown coal open mining areas in Central Germany'' (Project 02 WB 9667/5) which was funded by the Federal Ministry for Education and Research. It was carried out as a cooperation between GeoForschungszentrum Potsdam (GFZ, Potsdam GeoResearch Centre), Deutsches Zentrum for Lust- und Raumfahrt (DLR, German Aerospace Centre), Gesellschaft fuer Angewandte Fernerkundung (GAF, Society for Applied Remote Sensing) and Umweltforschungszentrum Leipzig/Halle GmbH (UFZ, Leipzig/Halle Environmental Research Centre). The idea of the project was to calibrate aerial data obtained by means of spectrometric remote sensing methods using conventional petrographic, mineralogical and geochemical analysis. This would provide the mining industry with a powerful method with low time and staff requirement for reliably classifying the vast dump areas produced by open pit mining, accurately assigning findings to location data and thus identifying suitable uses for different sites. The focus of the present study was on characterising hydrochemical and geochemical alterations in dump sediments of the Zwenkau brown coal open mining area south of Leipzig in Central Germany. The collection of these data plays a decisive role in plans for cultivating and assessing the potential hazard to the open mining landscape. [German] Die vorliegende Arbeit wurde im Rahmen des BMBF-gefoerderten Projektes 'Luft- und bodengestuetzte spektrometrische Untersuchungen zur Differenzierung reaktiv veraenderter Braunkohlentagebaugebiete in Mitteldeutschland' (Vorhaben 02 WB 9667/5) als Kooperation zwischen dem GeoForschungsZentrum Potsdam (GFZ), dem Deutschen Zentrum fuer Luft- und Raumfahrt (DLR), der Gesellschaft fuer Angewandte Fernerkundung (GAF) und dem Umweltforschungszentrum Leipzig/Halle GmbH (UFZ) angefertigt. Idee des Projektes war

ROBL - a CRG beamline for radiochemistry and materials research at the ESRF

International Nuclear Information System (INIS)

Matz, W.; Schell, N.; Bernhard, G.; Claussner, J.; Oehme, W.; Prokert, F.; Reich, T.; Schlenk, R.; Proehl, D.; Funke, H.; Eichhorn, F.; Betzl, M.; Dienel, S.; Brendler, V.; Denecke, M.A.; Krug, H.; Neumann, W.; Huettig, G.; Reichel, P.; Strauch, U.

1999-04-01

The paper describes the Rossendorf Beamline (ROBL) built by the Forschungszentrum Rossendorf at th ESRF. ROBL comprises two different and independently operating experimental stations: a radiochemistry laboratory for X-ray absorption spectroscopy of non-sealed radioactive samples and a general purpose materials research station for X-ray diffraction and reflectometry mainly of thin films and interfaces modified by ion beam techniques. The radiochemistry set-up is worldwide a unique installation at a modern synchrotron radiation source. (orig.) [de

ANKE, a new facility for medium energy hadron physics at COSY-Juelich

International Nuclear Information System (INIS)

Barsov, S.; Bechstedt, U.; Bothe, W.; Bongers, N.; Borchert, G.; Borgs, W.; Braeutigam, W.; Buescher, M.; Cassing, W.; Chernyshev, V.; Chiladze, B.; Dietrich, J.; Drochner, M.; Dymov, S.; Erven, W.; Esser, R.; Franzen, A.; Golubeva, Ye.; Gotta, D.; Grande, T.; Grzonka, D.; Hardt, A.; Hartmann, M.; Hejny, V.; Horn, L. van; Jarczyk, L.; Junghans, H.; Kacharava, A.; Kamys, B.; Khoukaz, A.; Kirchner, T.; Klehr, F.; Klein, W.; Koch, H.R.; Komarov, V.I.; Kondratyuk, L.; Koptev, V.; Kopyto, S.; Krause, R.; Kravtsov, P.; Kruglov, V.; Kulessa, P.; Kulikov, A.; Lang, N.; Langenhagen, N.; Lepges, A.; Ley, J.; Maier, R.; Martin, S.; Macharashvili, G.; Merzliakov, S.; Meyer, K.; Mikirtychiants, S.; Mueller, H.; Munhofen, P.; Mussgiller, A.; Nekipelov, M.; Nelyubin, V.; Nioradze, M.; Ohm, H.; Petrus, A.; Prasuhn, D.; Prietzschk, B.; Probst, H.J.; Pysz, K.; Rathmann, F.; Rimarzig, B.; Rudy, Z.; Santo, R.; Paetz Schieck, H.; Schleichert, R.; Schneider, A.; Schneider, Chr.; Schneider, H.; Schwarz, U.; Seyfarth, H.; Sibirtsev, A.; Sieling, U.; Sistemich, K.; Selikov, A.; Stechemesser, H.; Stein, H.J.; Strzalkowski, A.; Watzlawik, K.-H.; Wuestner, P.; Yashenko, S.; Zalikhanov, B.; Zhuravlev, N.; Zwoll, K.; Zychor, I.; Schult, O.W.B.; Stroeher, H.

2001-01-01

ANKE is a new experimental facility for the spectroscopy of products from proton-induced reactions on internal targets. It has recently been implemented in the accelerator ring of the cooler synchrotron COSY of the Forschungszentrum Juelich (FZ-Juelich), Germany. The device consists of three dipole magnets, various target installations and dedicated detection systems. It will enable a variety of hadron-physics experiments like meson production in elementary proton-nucleon processes and studies of medium modifications in proton-nucleus interactions

EFAM GTP 02 - the GKSS test procedure for determining the fracture behaviour of materials

International Nuclear Information System (INIS)

Schwalbe, K.H.; Heerens, J.; Zerbst, U.; Kocak, M.

2002-01-01

This document describes a unified fracture mechanics test method in procedural form for quasi-static testing of materials. It is based on the ESIS Procedures P1 and P2 and introduces additional features, such as middle cracked tension specimens, shallow cracks, the δ 5 crack tip opening displacement, the crack tip opening angle, the rate of dissipated energy, testing of weldments, and guidance for statistical treatment of scatter. Special validity criteria are given for tests on specimens with low constraint. This document represents an updated version of EFAM GTP 94. (orig.) [de

Cost accounting at the Kernforschungszentrum Karlsruhe GmbH

International Nuclear Information System (INIS)

Neck, E.

1979-01-01

A presentation of the Nuclear Research Center Karlsruhe and its main research activities is given. Company structure, planning and control system in the R and D field are explained. The cost accounting system of the Nuclear Research Center Karlsruhe is discussed in detail, a survey of cost accounting as practiced by other German research establishments and comments on cost accounting as a tool of performance gauging are given. (A.N.)

Gemeinschaftskernkraftwerk Grohnde GmbH (KWG). Annual report 2001

International Nuclear Information System (INIS)

Dittrich, H.

2002-01-01

Apart from the inspection outage and the 16th off-load refueling, operation of the reactor station in 2001 (mostly rated power operation according to the load dispatching center schedule) was uninterrupted and normal to a very large extent. The total gross electricity output in 2001 was 11.559.939 MWh, and net input to the public grid was 10.926.649 MWh. The station's power demand for operation was determined to be 5.5%. The averaged net efficiency was 34.4%. The following performance results are given for the operating year of 2001: Availability time ratio, 94.9%; availability factor (net), 92.2%; availability factor (VGB) 94,7%; load factor, 91.7%. The aggregate gross electricity output since start-up on 31 August 1984 (first criticality) amounts to 191.656.081 MWh, and the aggregate net output to 181.391.892 MWh. Radioactivity discharges by gaseous or liquid effluents were low in the reporting year, just like in the year before, remaining clearly below the licensed discharge values. The records of gaseous radioactive effluents show: rare gases, 1.60 E+11 Bq; aerosols, ≤ EG; iodine, 5,00 E+04 Bq. Radioactivity discharges with liquid effluents in the reporting year were measured to be 9.09 E+06 Bq (exclusive of tritium), and 1.39 E+13 Bq for tritium. The collective dose (direct read-out dosemeters) amounted to 56.62 mSv for the employed plant personnel, and 465.427 mSv for external personnel. (orig./CB) [de

Gemeinschaftskernkraftwerk Grohnde GmbH (KWG). Annual report 2002

International Nuclear Information System (INIS)

Dittrich, H.

2003-01-01

The annual report of the Gemeinschaftskernkraftwerk Grohnde contains the following 6 sections: a summary of the operating schedule, a more detailed part for the description of the power plant operation; an engineering section, a section electric engineering, a section for radiation protection and a section for educational topics. (SR) [de

Kernkraftwerk Obrigheim (KWO) GmbH. Annual report 1991

International Nuclear Information System (INIS)

Koerner, C.

1992-01-01

The Obrigheim nuclear power station was operated at full load from August 21 through Dec. 31, 1991, generating 1.108 GWh of electrical energy in 3.186 operating hours. The Obrigheim nuclear power station thus achieved during this period of 133 days in 1991 an operating availability of 100%. Since its commissioning in October 1968, the Obrigheim reactor station has been operating for 161.527 hours, generating 54.409 GWh (gross), and from test operation started in March 1969 up to the end of 1991, all in all 54.284 GWh have been generated in 160.747 operating hours, which means an availability time ratio of 78.2%, and a capacity factor of 80.4%. The plant was shut down in 1991 for the 21st refuelling operation including inspection and repair work, for a fictitious period of 1783 hours. In addition, power operation was stopped by an order of the supervisory authority for another 3.791 hours, so that the plant remained disconnected from the grid between Januar 1 and August 8, 1991. In the last part of the year 1991, until May 26, the plant had an excellent availability time ratio and thus contributed about 2.5% of the safe, economic and environmentally sound electricity supplies in Baden-Wuerttemberg. (orig.) [de

Comparative assessment of condensation models for horizontal tubes

International Nuclear Information System (INIS)

Schaffrath, A.; Kruessenberg, A.K.; Lischke, W.; Gocht, U.; Fjodorow, A.

1999-01-01

The condensation in horizontal tubes plays an important role e.g. for the determination of the operation mode of horizontal steam generators of VVER reactors or passive safety systems for the next generation of nuclear power plants. Two different approaches (HOTKON and KONWAR) for modeling this process have been undertaken by Forschungszentrum Juelich (FZJ) and University for Applied Sciences Zittau/Goerlitz (HTWS) and implemented into the 1D-thermohydraulic code ATHLET, which is developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH for the analysis of anticipated and abnormal transients in light water reactors. Although the improvements of the condensation models are developed for different applications (VVER steam generators - emergency condenser of the SWR1000) with strongly different operation conditions (e.g. the temperature difference over the tube wall in HORUS is up to 30 K and in NOKO up to 250 K, the heat flux density in HORUS is up to 40 kW/m 2 and in NOKO up to 1 GW/m 2 ) both models are now compared and assessed by Forschungszentrum Rossendorf FZR e.V. Therefore, post test calculations of selected HORUS experiments were performed with ATHLET/KONWAR and compared to existing ATHLET and ATHLET/HOTKON calculations of HTWS. It can be seen that the calculations with the extension KONWAR as well as HOTKON improve significantly the agreement between computational and experimental data. (orig.) [de

HO2 measurements at atmospheric concentrations using a chemical ionization mass spectrometry

Science.gov (United States)

Albrecht, S.; Novelli, A.; Hofzumahaus, A.; Kang, S.; Baker, Y.; Mentel, T. F.; Fuchs, H.

2017-12-01

Correct and precise measurements of atmospheric radical species are necessary for a better understanding of the oxidative capacity of the atmosphere. Due to the reactivity of radicals, and their consequent low concentrations, direct measurements of these species are particularly challenging and have been proven in the past to be affected by interfering species. Here we present a chemical ionization source coupled to an APi-HR-TOF-MS (Aerodyne Research Inc.), which has a limit of detection for HO2 radicals well below its atmospheric concentrations ( 1 x 108 molecules cm-3). The instrument was calibrated with a well-established and characterized HO2 calibration source in use for the laser induced fluorescence instrument in the Forschungszentrum Jülich. Within the source, a well characterized amount of HO2 radicals is produced after photolysis of water by a mercury lamp. In addition, several experiments were performed in the atmosphere simulation chamber SAPHIR at the Forschungszentrum Jülich to test for potential interferences. Measurements of HO2 radicals were concurrently detected by a laser induced fluorescence instrument allowing for the comparison of measurements within the two different and independent techniques for various atmospheric conditions regarding concentrations of O3, NOx and VOCs. Results from the intercomparison together with the calibration procedure of the instrument and laboratory characterization will be presented.

Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2001

International Nuclear Information System (INIS)

Johannsen, B.; Seifert, S.

2002-01-01

In 2001 the Forschungszentrum Rossendorf e.V. continued and further developed its basic and application-oriented research. Research at the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Research Centre, was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. As illustrated by the large number of contributions in this report, the Institute is predominantly engaged in the coordination chemistry and radiopharmacology of technetium and rhenium. (orig.)

Application of fracture-mechanics principles to austenitic steels

International Nuclear Information System (INIS)

Schwalbe, K.H.; Cornec, A.; Baustian, K.

1996-01-01

Recent experimental and analytical work mainly carried out at GKSS and TH Darmstadt is used to check the usefulness of fracture mechanics methods as developed for more conventional materials, such as ferritic steels and aluminium alloys. Finite element calculations serve for quantifying J validity limits; they are a function of constraint conditions and strain hardening properties. Crack growth studies show the ability of the J-integral, the modified J-integral, J(M), and of the crack tip opening displacement, CTOD delta(5), to generate unique, i.e. size-independent, R-curves. It is also shown that the delta(5)-type CTOD technique yields values close to the standardised CTOD. Finally, the Engineering Treatment Model is used to estimate delta(5) and J as driving force parameters. Special attention is given to the power law representation of actual stress/strain curves. (author)

Texture analysis using angle dispersive neutron nuclear scattering

International Nuclear Information System (INIS)

Brokmeier, H.G.

1995-01-01

This paper describes in detail the method of texture determination using neutron diffraction. The main advantages of neutron diffraction arise from the high penetration depth for most materials which is a factor of 10 2 -10 4 higher than for X-ray diffraction. Consequently neutron diffraction is an efficient tool for the investigation of global textures and coarse grained materials. Moreover, the measurement of large sample volumes gives excellent grain statistics, allows the influence of texture inhomogeneities to be neglected and allows the measurement of complete pole figures even of minority phases. A number of examples show the application of neutron diffraction to measure textures of metals, alloys, composites, intermetallic compounds and rocks. A detailed description of TEX-2 the neutron texture diffractometer at GKSS Research Centre is given which is completed by a comparison to other neutron texture diffractometers. (orig.) [de

State of the Japanese nuclear research ship MUTSU

International Nuclear Information System (INIS)

Lettnin, H.

1981-01-01

A short introductary comment of the German-Japanese cooperation on the field of nuclear ship propulsion is given, which since several years had led to the development of a nuclear propelled containership with 80 000 shp. Against this background the cooperation with the Japanese was renewed for checking the shield modification of NS MUTSU by GKSS. Before the modification of the shielding is dealt with in more detail the design concept of ship and reactor plant of the vessel is presented. The observed defects as well as the rebuilding concept of the changed shielding incl. the shielding calculations. The constructive modifications have led to reconsiderations of safety aspects for ship and reactor. Finally a short description of the repair site in Sasebo is given and an outlook on the nuclear ship development in Japan. (orig.) [de

Differential phase contrast setup for a non coherent beamline at HASYLAB using hard X-ray grating interferometer

Energy Technology Data Exchange (ETDEWEB)

Herzen, Julia; Beckmann, Felix; Haibel, Astrid; Schreyer, Andreas [GKSS Research Centre, Geesthacht (Germany); Donath, Tilman; David, Christian; Gruenzweig, Christian [Paul Scherrer Institute, Villigen PSI (Switzerland); Pfeiffer, Franz [Paul Scherrer Institute, Villigen PSI (Switzerland); EPF Lausanne, Lausanne (Switzerland)

2009-07-01

Phase-contrast imaging is a common technique to visualize soft tissue with much higher contrast than the conventional absorption-contrast imaging. Differential phase contrast (DPC), developed at PSI, Switzerland, makes use of a hard x-ray grating interferometer and allows for phase-contrast imaging with high brilliance synchrotron sources as well as with conventional x-ray tubes. It is recently reported also to provide dark field information that is very sensitive to micro structures like porosity within the materials. Here we present the plans to adopt the DPC technique to the HARWI-II materials science beamline, operated by GKSS Research Centre, in cooperation with DESY, Hamburg. This will offer an amount of new applications especially in the field of materials science like for example characterizing new light weight materials like magnesium and studying its corrosion as implant material.

Findings from working for the IAEA initiative on research reactor ageing and ageing management

International Nuclear Information System (INIS)

Roegler, H.-J.

2010-01-01

1995 the last sharing and compiling the existing knowledge about of the Research Reactor (RR) Ageing and the respective Fighting took place during a well attended conference at Geesthacht, Germany, documented in a bulky conference report. In 2008, the International Atomic Energy Agency has initiated another collecting and evaluating in order to make the recent experience in that field available to the entire RR Community. In this respect, RR operators, plant and system fabricators, and authorities as well as independent experts have been approached worldwide for providing contributions and fortunately about every second member of the RR Community replied. The paper is going to inform on the experience gained by the contacts and communication, the replies as well as the non-replies, underlying motives as problems, and mainly, some statistical evaluation of the findings. The respective IAEA data base being accessible to all members of the RR Community will be briefly characterised in structures and contents. (author)

Re-evaluation of the criticality experiments of the ''Otto Hahn Nuclear Ship'' reactor

Energy Technology Data Exchange (ETDEWEB)

Lengar, I.; Snoj, L.; Rogan, P.; Ravnik, M. [Jozef Stefan Institute, Ljubljana (Slovenia)

2008-11-15

Several series of experiments with a FDR reactor (advanced pressurized light water reactor) were performed in 1972 in the Geesthacht critical facility ANEX. The experiments were performed to test the core prior to its usage for the propulsion of the first German nuclear merchant ship ''Otto-Hahn''. In the present paper a calculational re-evaluation of the experiments is described with the use of the up-to date computer codes (Monte-Carlo code MCNP5) and nuclear data (ENDF/B-VI release 6). It is focused on the determination of uncertainties in the benchmark model of the experimental set-up, originating mainly from the limited set of information still available about the experiments. Effects of the identified uncertainties on the multiplication factor were studied. The sensitivity studies include parametric variation of material composition and geometry. The combined total uncertainty being found 0.0050 in k{sub eff}, the experiments are qualified as criticality safety benchmark experiments. (orig.)

Advanced development and operating experience with a canned motor pump under pressurized water reactor conditions

International Nuclear Information System (INIS)

Dittmer, H.; Reymann, A.; Seibig, B.; Reinecker, H.

1988-01-01

At the research reactor FRG-2, Geesthacht, an irradiation device is in operation for testing defective light-water-reactor (LWR) test fuel rods under pressurized water reactor conditions (320 0 C, 160 bar). The requirements to the canned motor pump for cooling water circulation: medium: Demineralized water, operating temperature 320 0 C, operating pressure 155 bar, radiation field of the reactor, integration in the irradiation capsule, helium leak rate -6 mbar.dm 3 .s -1 , minimum working life 3000 hours, were high and caused difficulties in the acquisition of this component. First test runs with supplied pumps showed that the desired working life could not be achieved. The results of the development steps, the test runs, and the performance in service show that for our range of applications, the best combination of materials for the radial bearings is silicon-infiltrated SiC (8% free Si) against the same material. These bearings allowed a good working life for the pump to be achieved. (orig./GL) [de

State of the Japanese nuclear research ship MUTSU

International Nuclear Information System (INIS)

Lettnin, H.

1981-01-01

A short introductory comment of the German-Japanese cooperation on the field of nuclear ship propulsion is given, which since several years had led to the development of a nuclear propelled containership with 80 000 shp. Against this background the cooperation with the Japanese was renewed for checking the shield modification of NS MUTSU by GKSS. Before the modification of the shielding is dealt with in more detail the design concept of ship and reactor plant of the vessel is presented. The observed defects in the shielding during the nuclear commissioning of the vessel are discussed as well as the rebuilding concept of the changed shielding incl. the shielding calculations. The constructive modifications have led to reconsiderations of safety aspects for ship and reactor. Finally a short description of the repair site in Sasebo is given and an outlook on the nuclear ship development in Japan. (orig.) [de

The Project for the High Energy Materials Science Beamline at Petra III

International Nuclear Information System (INIS)

Martins, R. V.; Lippmann, T.; Beckmann, F.; Schreyer, A.

2007-01-01

The high energy materials science beamline will be among the first fourteen beamlines planned to be operational in 2009 at the new third generation synchrotron light source Petra III at DESY, Germany. The operation and funding of this beamline is assured by GKSS. 70% of the beamline will be dedicated to materials science. The remaining 30% are reserved for physics and are covered by DESY. The materials science activities will be concentrating on three intersecting topics which are industrial, applied, and fundamental research. The beamline will combine three main features: Firstly, the high flux, fast data acquisition systems, and the beamline infrastructure will allow carrying out complex and highly dynamic in-situ experiments. Secondly, a high flexibility in beam shaping will be available, fully exploiting the high brilliance of the source. Thirdly, the beamline will provide the possibility to merge in one experiment different analytical techniques such as diffraction and tomography

Main refurbishment activities on electronic and electrical equipment for the FRG-1 research reactor

International Nuclear Information System (INIS)

Blom, K.H.; Krull, W.

1997-01-01

As GKSS intends to operate the research reactor FRG-1 safely and reliably for many years to come, the plant is constantly refurbished and upgraded both in the interests of safety and operational reasons. The following electronic and electrical systems have been replaced or improved since 1990: Information and signalling systems; Emergency power plant (permit applied for); External and internal lightning protection system; Reactor protection system (in part); Safety lighting; Alarm and staff locating system; Control room telephone system; Closed-circuit television system; Beam tube controls; Storage plant for radioactive liquid waste; Ambient dose rate measuring system; Meteorological measuring system; Control and measuring system for the primary cooling circuit; Control rod drives; Control rod control system; Soft start for the secondary pumps; Control and switching devices for the emergency power plant; Trailing cable installation for the reactor bridge; Main-voltage distribution systems/cable routes. (author). 13 figs, 1 tab

IAEA consultants' meeting on benchmark validation of FENDL-1. Summary report

International Nuclear Information System (INIS)

Pashchenko, A.B.

1996-01-01

The present report contains the Summary of the IAEA Consultants' Meeting on ''Benchmark Validation of FENDL-1'', held at Karlsruhe, Germany, from 17 to 19 October 1995. This meeting was organized by the IAEA Nuclear Data Section (NDS) with the co-operation and assistance of local organizers of the Forschungszentrum Karlsruhe, Germany. Summarized are the conclusions and the main results of extensive benchmarking of FENDL-1 by comparing experimental data from numerous number of fusion integral experiments, to analytical predictions based on discrete ordinates as well as Monte Carlo calculations. (author). 4 refs

Applications of moisture monitoring using TAUPE-sensors

International Nuclear Information System (INIS)

Koeniger, F.

2007-01-01

TAUPE as a moisture sensor has been developed in cooperation with Technology Transfer Division in Forschungszentrum Karlsruhe since 1996. These sensors can be used to monitor moisture in a variety of materials, using time domain or frequency domain techniques. Major applications are large area supervision of landfill sealings, determination of the snow water equivalent, e.g. in the project SNOWPOWER for the forecasting of the amount of water for energy production in storage lakes and, as a new project, continuous monitoring of groundwater level in the flood plane of river Rhine. (orig.)

Closed-orbit correction using the new beam position monitor electronic of Elsa Bonn

CERN Document Server

Dietrich, J; Keil, J

2000-01-01

RF and digital electronics, developed at the Forschungszentrum Jülich/IKP were integrated to form the new beam position monitor (BPM) system at the Electron Stretcher Accelerator (ELSA) of the University of Bonn. With this system the preservation of the polarization level during acceleration was currently improved by a good correction of the closed-orbit. All BPM offsets relative to the magnetic quadrupole centers were determined by the method of beam-based alignment. The optics functions measured by the BPM system are in good agreement with theoretical predictions.

Decommissioning of the reactor tank and the activated structures within the containment of the sodium cooled nuclear reactor facility (KNK) regulated by the permission step 9; Kompakte Natriumgekuehlte Kernreaktoranlage (KNK). Beseitigung des Reaktortanks und der aktivierten Strukturen im Sicherheitsbehaelter der KNK im Zuge der 9. Stilllegungsgenehmigung

Energy Technology Data Exchange (ETDEWEB)

Zuefle, E.M. [Westinghouse Electric Germany GmbH (Germany)

2006-07-01

Westinghouse was assigned with the decommissioning of the KNK plant by th Forschungszentrum Karlsruhe. One very substantial subject such as the decommissioning of the reactor vessel, is currently performed under specific boundary conditions as residual sodium in the vessel on nitrogen environment. An enclosure in hot-cell technology with wall thickness of 350 mm and total weight of around 500 Mg has been erected above the reactor vessel. All operations are done remote controlled. The paper describes the main boundary conditions, weights and dose rates, cutting technology and installed infrastructure. (orig.)

SRF technology at accel for worldwide accelerator projects

International Nuclear Information System (INIS)

Bauer, S.; Griep, B.; Peiniger, M.; Pekeler, M.; Piel, C.; Stein, P. vom; Vogel, H.

2003-01-01

Within the last two years activities at ACCEL for international accelerator projects using superconducting cavities have steadily increased. We report on our production work for CERN (HOM couplers for LHC cavities), DESY (TESLA cavities and couplers), Forschungszentrum Juelich (turn key low beta SRF module), SRRC, CLS and Cornell (turn key 500 MHz SRF modules. The production a superconducting Landau accelerator module for BESSY has started recently. In addition studies are under way for a superconducting 40 MeV proton/deuteron linac and for superconducting low beta multi gap structures. (author)

Computational methods, tools and data for nuclear analyses of fusion technology systems

International Nuclear Information System (INIS)

Fischer, U.

2006-01-01

An overview is presented of the Research and Development work conducted at Forschungszentrum Karlsruhe in co-operation with other associations in the framework of the European Fusion Technology Programme on the development and qualification of computational tools and data for nuclear analyses of Fusion Technology systems. The focus is on the development of advanced methods and tools based on the Monte Carlo technique for particle transport simulations, and the evaluation and qualification of dedicated nuclear data to satisfy the needs of the ITER and the IFMIF projects. (author)

Response of multi-strip multi-gap resistive plate chamber using pulsed electron beam

International Nuclear Information System (INIS)

Datta Pramanik, U.; Chakraborty, S.; Rahaman, A.; Ray, J.; Chatterjee, S.; Bemmerer, D.; Elekes, Z.; Kempe, M.; Sobiella, M.; Stach, D.; Wagner, A.; Yakorev, D.; Leifels, Y.; Simon, H.

2011-01-01

A prototype of Multi-strip Multi-gap Resistive Plate Chamber (MMRPC) with active area 40 cm x 20 cm has been developed at SINP, Kolkata. Electron response of the developed detector was studied using the electron linac ELBE at Forschungszentrum Dresden-Rossendorf. The development of this detector started with the aim of developing a neutron detector but this ultrafast timing detector can be used efficiently for the purpose of medical imaging, security purpose and detection of minimum ionising particle. In this article detailed analysis of electron response to our developed MMRPC will be presented

Modelling of QUENCH-03 and QUENCH-06 Experiments Using RELAP/SCDAPSIM and ASTEC Codes

Directory of Open Access Journals (Sweden)

Tadas Kaliatka

2014-01-01

Full Text Available To prevent total meltdown of the uncovered and overheated core, the reflooding with water is a necessary accident management measure. Because these actions lead to the generation of hydrogen, which can cause further problems, the related phenomena are investigated performing experiments and computer simulations. In this paper, for the experiments of loss of coolant accidents, performed in Forschungszentrum Karlsruhe, QUENCH-03 and QUENCH-06 are modelled using RELAP5/SCDAPSIM and ASTEC codes. The performed benchmark allowed analysing different modelling features. The recommendations for the model development are presented.

GALAXI: Gallium anode low-angle x-ray instrument

Directory of Open Access Journals (Sweden)

Emmanuel Kentzinger

2016-03-01

Full Text Available The high brilliance laboratory small angle X-ray scattering instrument GALAXI, which is operated by JCNS, Forschungszentrum Jülich, permits the investigation of chemical correlations in bulk materials or of structures deposited on a surface at nanometre and mesoscopic length scales. The instrument is capable to perform GISAXS experiments in reflection at grazing incidence as well as SAXS experiments in transmission geometry. The X-ray flux on sample is comparable or higher than the one obtained at a comparable beamline at a second generation synchrotron radiation source.

Kernkraftwerke Lippe-Ems GmbH (KLE). 1995 annual report

International Nuclear Information System (INIS)

1996-01-01

The tasks and activities of the operators of the Emsland reactor station (KKE) are reported. The year-end statement of 1995 includes many details about the financial situation, (such as the balance sheet, profit and loss account, etc.). (UA) [de

Annual report 1988 of the Kernkraftwerk Obrigheim GmbH

International Nuclear Information System (INIS)

Koerner, C.

1989-01-01

The Obrigheim nuclear power station was operated at full load during the year 1988; 7.800 operating hours produced electrical energy of 2.755 GWh. This is the second best annual result during Obrigheim's operating period. Since commissioning in October 1968, 147.110 hours of operation have generated 49.436 GWh (gross) and from test operation in March 1969 until the end of 1988, 146.330 hours of operation have generated 49.324 GWh. This is an availability of power of 81.9% in this period and a time availability of 84.1%. In 1988, the plant was shut down for 927 hours for the 18th refueling including testing, inspection and repair work. Apart from refueling, the plant had a good time availability and therefore contributed 5% to the safe, economical and environmentally acceptable electricity supply of the Land Baden-Wuerttemberg. The power station is of great significance to the region, both in terms of power supply and the economy. (orig./HP) [de

Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research. Annual report 2004

International Nuclear Information System (INIS)

Borany, J. von; Heera, V.; Helm, M.; Jaeger, H.U.; Moeller, W.

2005-01-01

The following topics are dealt with: Silicon based electrically driven microcavity LED, ultraviolet electroluminescence from a Gd-implanted Si-metal-oxide-semiconductor device, semiconductor quantum-cascade lasers, ion beam synthesis and morphology of semiconductor memories, ion implantation, films, sputtering, ion-beam induced destabilization of nanoparticles. (HSI)

Recent developments in solid oxide fuel cells at Forschungszentrum Juelich and in Europe

Energy Technology Data Exchange (ETDEWEB)

Steinberger-Wilckens, Robert; Blum, L.; Buchkremer, H.P.; Haart, L.J.G. de; Malzbender, J. [Forschungszentrum Juelich GmbH (DE). Inst. fuer Energieforschung (IEF); Pap, M.; Gross, S.M. [Forschungszentrum Juelich GmbH (DE). Zentralabteilung Technologie (ZAT)

2010-07-01

The SOFC group at FZJ has assembled and tested more than 350 SOFC stacks rated between 100 W and 15 kW during the last 15 years. The research topics cover the whole SOFC development area from materials over stack design, manufacturing of cells, stacks and components, mechanical and electrochemical characterisation, up to system design and demonstration. Use of improved steels, cathodes and materials processing has resulted in reduced degradation rates around 4 mV (<0.50%) per 1000 hours at 800 C and 500 mA/cm{sup 2} over tested stack lifetimes of over 15 000 hours. Other stacks operating at 700 C have already reached over 22.000 hours of lifetime. However, the target of development is directed at even further lowered degradation for commercial operation in stationary applications. All stack tests are accompanied by disassembly and post-operative examinations investigating such phenomena as cathode degradation, corrosion, and other ageing phenomena. These analyses give a deep insight into the interaction of the stack materials and supply vital data on assessing the possibilities for prolonged stack operation over some 10's of thousand hours. This paper gives an overview and summary of achievements of Juelich developments. It also discusses the European perspectives in SOFC commercialisation. European manufacturers are holding a leading edge on the planar SOFC technology with new activities developing rapidly. (orig.)

Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Borany, J. von; Heera, V.; Helm, M.; Jaeger, H.U.; Moeller, W. (eds.)

2005-07-01

The following topics are dealt with: Silicon based electrically driven microcavity LED, ultraviolet electroluminescence from a Gd-implanted Si-metal-oxide-semiconductor device, semiconductor quantum-cascade lasers, ion beam synthesis and morphology of semiconductor memories, ion implantation, films, sputtering, ion-beam induced destabilization of nanoparticles. (HSI)

On the operating experience of the Doppler Sodar system at the Forschungszentrum Juelich

International Nuclear Information System (INIS)

Adiga, B.B.; Zeuner, G.

1990-04-01

In this report the description and the operating principles of the Doppler Sodar at the KFA are briefly described and outputs from the routine operation of the Sodar are compared with the concurrently measured data on the 120 m high KFA meteorological tower. Three sets of data, varying from periods of ten days to 18 days, are used for the comparison. (orig.)

The Text of the Agreement of 22 July 1977 between Argentina and the Agency for the Application of Safeguards in Connection with a Contract Concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union Gmbh Hanau (Federal Republic of Germany) for Co-Operation in the Field of Fabrication of Fuel Elements for Peaceful Nuclear Activities

International Nuclear Information System (INIS)

1977-01-01

The text of the Agreement of 22 July 1977 between Argentina and the Agency for the application of safeguards in connection with the Contract of 13 August 1976 concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union GmbH (Federal Republic of Germany) for co-operation in the field of fabrication of fuel elements for peaceful nuclear activities is reproduced in this document for the information of all Members. The Agreement entered into force, pursuant to Section 26, on 22 July 1977.

The Text of the Agreement of 22 July 1977 between Argentina and the Agency for the Application of Safeguards in Connection with a Contract Concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union Gmbh Hanau (Federal Republic of Germany) for Co-Operation in the Field of Fabrication of Fuel Elements for Peaceful Nuclear Activities

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-11-30

The text of the Agreement of 22 July 1977 between Argentina and the Agency for the application of safeguards in connection with the Contract of 13 August 1976 concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reaktor Brennelement Union GmbH (Federal Republic of Germany) for co-operation in the field of fabrication of fuel elements for peaceful nuclear activities is reproduced in this document for the information of all Members. The Agreement entered into force, pursuant to Section 26, on 22 July 1977.

Method of gamma transmission analysis for controlling the hydraulic transport of raw coal

International Nuclear Information System (INIS)

Pepelnik, R.; Boessow, E.; Fanger, H.U.

1978-01-01

The capacity of the methods for measuring gamma absorption developed at GKSS to be used for the analysis of conweyer flows of water/coal/refuse mixtures has been studied. As only the absorption properties of the refuse are essentially different from those of water the refuce is detected with higher accuracy than the coal. In this way the sensitivity of the gamma transmission analysis method agrees with the fact that in coal mining the critical mining parameters are influenced by refuse. The results of the investigations indicate that for measuring times of about 10 sec, accounting for realisitic variations of the chemism of the refuse, the volume shares can be determined with an accuracy of about +- 4.7 V/O of coal and about +- . 5 V/O of refuse. The measuring arrangement for the drift velocity is capable to record also the size and the number of the refuse lumps. The methods described therefore are well suited for controlling an optimal conveying operation. (orig.) [de

Remote measurement of atmospheric temperature profiles in clouds with rotational Raman lidar; Fernmessung atmosphaerischer Temperaturprofile in Wolken mit Rotations-Raman-Lidar

Energy Technology Data Exchange (ETDEWEB)

Behrendt, A. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Physikalische und Chemische Analytik

2000-07-01

The development of a lidar receiver for remote measurements of atmospheric temperature profiles with the rotational Raman method is described. By a new receiver concept, this instrument allowed for the first time remote temperature measurements without any perturbation by the presence of clouds up to a backscatter ratio of 45. In addition, high efficiency of the spectral separation of atmospheric backscatter signals leads to improved measurement resolution: the minimum integration time needed for a statistical uncertainty < {+-}1 K at, e.g., 10 km height and 960 m height resolution is only 5 minutes. The measurement range extends to over 45 km altitude. Results of field campaigns obtained with the instrument are presented and discussed. In winter 1997/98, the instrument was transferred with the GKSS Raman lidar to Esrange (67.9 N, 21.1 E) in northern Sweden, where pioneering remote measurements of local temperatures in orographically induced polar stratospheric clouds could be carried out. (orig.)

EPOS-An intense positron beam project at the ELBE radiation source in Rossendorf

International Nuclear Information System (INIS)

Krause-Rehberg, R.; Sachert, S.; Brauer, G.; Rogov, A.; Noack, K.

2006-01-01

EPOS, the acronym of ELBE Positron Source, describes a running project to build an intense pulsed beam of mono-energetic positrons (0.2-40 keV) for materials research. Positrons will be created via pair production at a tungsten target using the pulsed 40 MeV electron beam of the superconducting linac electron linac with high brilliance and low emittance (ELBE) at Forschungszentrum Rossendorf (near Dresden, Germany). The chosen design of the system under construction is described and results of calculations simulating the interaction of the electron beam with the target are presented, and positron beam formation and transportation is also discussed

Manual for operation of the multipurpose thermalhydraulic test facility TOPFLOW (Transient Two Phase Flow Test Facility)

International Nuclear Information System (INIS)

Beyer, M.; Carl, H.; Schuetz, H.; Pietruske, H.; Lenk, S.

2004-07-01

The Forschungszentrum Rossendorf (FZR) e. V. is constructing a new large-scale test facility, TOPFLOW, for thermalhydraulic single effect tests. The acronym stands for transient two phase flow test facility. It will mainly be used for the investigation of generic and applied steady state and transient two phase flow phenomena and the development and validation of models of computational fluid dynamic (CFD) codes. The manual of the test facility must always be available for the staff in the control room and is restricted condition during operation of personnel and also reconstruction of the facility. (orig./GL)

Results of the ITER toroidal field model coil project

International Nuclear Information System (INIS)

Salpietro, E.; Maix, R.

2001-01-01

In the scope of the ITER EDA one of the seven largest projects was devoted to the development, manufacture and testing of a Toroidal Field Model Coil (TFMC). The industry consortium AGAN manufactured the TFMC based on on a conceptual design developed by the ITER EDA EU Home Team. The TFMC was completed and assembled in the test facility TOSKA of the Forschungszentrum Karlsruhe in the first half of 2001. The first testing phase started in June 2001 and lasted till October 2001. The first results have shown that the main goals of the project have been achieved

Pressure suppression system (PSS) for nuclear ships. Experimental results obtained at the GKSS PSS-test-facillity

International Nuclear Information System (INIS)

Aust, E.; Niemann, H.R.; Schwan, H.; Vollbrandt, J.

1978-01-01

The PSS-test facility is shortly presented which was designed to show experimentally the operation of the pressure suppression containment for the NCS 80 concept. The results of the experimental LOCA-simulation tests in the PSS-test facility are illustrated by diagrams. The observed phenomena as chugging and pessure oscillations immediately after vent clearing are reported as well as the thermohydraulic loadings of the total system. Finally a short view is given on the future test program

Co-ordinated field measurements on the influnce of leewaves on polar stratospheric clouds; Koordinierte Feldmessungen zum Einfluss von Leewellen auf Wolkenfelder in der polaren Stratosphaere

Energy Technology Data Exchange (ETDEWEB)

Reichardt, J.; Behrendt, A.; Baumgart, R.; Weitkamp, C. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Physikalische und Chemische Analytik

1999-07-01

Within the framework of the project presented, the GKSS Raman lidar was deployed at the Swedish research facility ESRANGE (67.9 N, 21.1 E) in winters 1996/7 and 1997/8 for simultaneous measurements of ozone, polar stratospheric cloud (PSC) particle properties, and temperature. Both synoptic and mesoscale PSCs were observed under various meteorological conditions. On 16 Jan 1997 the complete life cycle of a leewave-induced PSC was measured. Four days later backscatter and depolarization ratios of a PSC Ia-enhanced were observed at UV wavelengths for the first time. A model was developed to compute 532 nm particle properties from these Raman lidar measurements. The calculated optical parameters agreed well with lidar measurements of this PSC type at 532 nm. Ozone profiles in PSCs were obtained during two PSC events. In winter 1997/8 temperature profiles were measured in PSCs and leewaves with the newly developed rotational Raman receiver without critical a-priori assumptions. The comparison of lidar temperatures with the European Centre for Medium Range Weather Forecast temperature analysis proved the values at the 10 hPa model level erroneous by up to 25 K. Optical and geometrical properties of arctic-winter cirrus clouds were analyed as well. Surprising spatial homogeneity in the parameter profiles was found. (orig.) [German] Im Rahmen des hier vorgestellten Projekts wurden mit dem GKSS-Ramanlidar in den Wintern 1996/7 und 1997/8 auf der schwedischen Forschungsstation ESRANGE (67.9 N, 21.1 E) gleichzeitig Ozonkonzentration, Partikeleigenschaften polarer stratosphaerischer Wolken (PSCs) und Temperatur bestimmt. Unter verschiedenen meteorologischen Bedingungen wurden sowohl synoptische als auch mesoskalige PSCs gemessen. Am 16. Januar 1997 wurde der vollstaendige Lebenszyklus einer leerwelleninduzierten PSC beobachtet. Vier Tage spaeter wurden erstmalig bei UV-Wellenlaengen Rueckstreu- und Depolarisationsverhaeltnisse der PSC Ia-enhanced gemessen. Zur Berechnung der

High Confinement and High Density with Stationary Plasma Energy and Strong Edge Radiation Cooling in Textor-94

Science.gov (United States)

Messiaen, A. M.

1996-11-01

A new discharge regime has been observed on the pumped limiter tokamak TEXTOR-94 in the presence of strong radiation cooling and for different scenarii of additional hearing. The radiated power fraction (up to 90%) is feedback controlled by the amount of Ne seeded in the edge. This regime meets many of the necessary conditions for a future fusion reactor. Energy confinement increases with increasing densities (reminiscent of the Z-mode obtained at ISX-B) and as good as ELM-free H-mode confinement (enhancement factor verus ITERH93-P up to 1.2) is obtained at high densities (up to 1.2 times the Greenwald limit) with peaked density profiles showing a peaking factor of about 2 and central density values around 10^14cm-3. In experiments where the energy content of the discharges is kept constant with an energy feedback loop acting on the amount of ICRH power, stable and stationary discharges are obtained for intervals of more than 5s, i.e. 100 times the energy confinement time or about equal to the skin resistive time, even with the cylindrical q_α as low as 2.8 β-values up to the β-limits of TEXTOR-94 are achieved (i.e. β n ≈ 2 of and β p ≈ 1.5) and the figure of merit for ignition margin f_Hqa in these discharges can be as high as 0.7. No detrimental effects of the seeded impurity on the reactivity of the plasma are observed. He removal in these discharges has also been investigated. [1] Laboratoire de Physique des Plasmas-Laboratorium voor Plasmafysica, Association "EURATOM-Belgian State", Ecole Royale Militaire-Koninklijke Militaire School, Brussels, Belgium [2] Institut für Plasmaphysik, Forschungszentrum Jülich, GmbH, Association "EURATOM-KFA", Jülich, Germany [3] Fusion Energy Research Program, Mechanical Engineering Division, University of California at San Diego, La Jolla, USA [4] FOM Institüt voor Plasmafysica Rijnhuizen, Associatie "FOM-EURATOM", Nieuwegein, The Netherlands [*] Researcher at NFSR, Belgium itemize

The status of the German AF-program and thoughts toward a nationally and internationally coordinated termination of the program

International Nuclear Information System (INIS)

Thamm, G.

1987-01-01

The activities under the German AF-Program primarily concentrate at present on the establishment of the fabrication technology for LEU fuel elements on the basis of uranium silicide (U 3 Si 2 ). In the meantime, the technical facilities for the individual process steps have been largely provided and, for the major part, have already been integrated into the future series production line. The conversion studies for the German research reactors planned to be converted from HEU to LEU currently aim at determining the operation- and licensing- specific data (in part already available) required primarily for the licensing applications. Such an application has already been filed for the Geesthacht reactors so that it is highly probable that one research reactor in Germany will be converted to LEU operation in 1988. Since there are only about two years left until the official end of the AF-Program, the procedure for terminating the program is being considered at present. Relevant views developed in the past as well as thoughts towards a coordinated procedure for terminating the international RERTR activities will be presented. (Author)

77 FR 27661 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-05-11

... by two reports of the plain journal bearings moving in relation to the main rotor swashplate sliding... plain journal bearing, which could limit the movement of the collective control and result in subsequent... summarizing each substantive public contact with FAA personnel concerning this proposed rulemaking. Before...

78 FR 77380 - Airworthiness Directives; Dornier Luftfahrt GmbH Airplanes

Science.gov (United States)

2013-12-23

... wire(s) and assure correct installation of the wiring in the flight deck overhead panels by reattaching... damaged wiring on the flight deck overhead panels (5VE and 6VE). We are issuing this proposed AD to... identified as mandatory actions for continued airworthiness. In 2005, chafed wiring was found on 5VE Panel...

77 FR 52265 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-08-29

... total area of corrosion or thread damage, or both, covers less than 25 percent of the length of the... paragraph (d)(3) of this AD. (B) If the total area of corrosion or thread damage, or both, covers 25 percent... to require inspections for corrosion or thread damage to each tail rotor balance weight (weight) and...

78 FR 52410 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-08-23

... corrosion or thread damage, or both, covers less than 25 percent of the length of the threaded area, the...) If the total area of corrosion or thread damage, or both, covers 25 percent or more of the length of... inspections for corrosion or thread damage to each tail rotor balance weight (weight) and each tail rotor...

78 FR 48599 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-08-09

...-reference service information, the economic evaluation, any comments received, and other information. The...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0... justifies making a regulatory distinction; and (4) Will not have a significant economic impact, positive or...

78 FR 42677 - Airworthiness Directives; Austro Engine GmbH Engines

Science.gov (United States)

2013-07-17

...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0... making a regulatory distinction, and (4) Will not have a significant economic impact, positive or..., Aviation safety, Incorporation by reference, Safety. Adoption of the Amendment Accordingly, under the...

77 FR 37777 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-06-25

... power display when a generator is deactivated and provides procedures to prevent failure of the remaining generator. Before we issued that AD, the manufacturer developed a procedure to modify the two... Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590...

78 FR 44050 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-07-23

..., and subsequent loss of helicopter control. DATES: We must receive comments on this proposed AD by... could result in failure of an engine, loss of engine power, and subsequent loss of helicopter control... corrosion, leaking grease, condensation, or water. This proposed AD is prompted by metallic debris from an...

77 FR 44116 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-07-27

... on the operator handle has been deactivated, the rescue winch may be used. Costs of Compliance We... technical representative, has notified us of the unsafe condition described in the EASA AD. We are issuing.... The EASA AD also applies to the MBB-BK 117 A-1 model. Eurocopter informs us that the MBB-BK 117 A-1...

78 FR 31394 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-05-24

... Agency (EASA), which is the Technical Agent for the Member States of the European Union, issued EASA AD... short circuit on the yaw Smart Electro-Mechanical Actuator (SEMA) ``ACTIV'' input to ground led to the...

78 FR 26715 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-05-08

... injection tubes during an engine fire, which could result in impaired distribution of the fire extinguishing... system injection tubes. This proposed AD is prompted by a report that the injection tubes are deforming... injection tubes during a fire, which could result in impaired distribution of the fire extinguishing agent...

78 FR 56597 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-09-13

... extinguishing system injection tubes during an engine fire, which could result in impaired distribution of the... injection tubes. This AD is prompted by a report that the injection tubes are deforming due to heat. The actions required by this AD are intended to prevent deformation of the fire extinguishing system injection...

77 FR 21400 - Airworthiness Directives; DG Flugzeugbau GmbH Sailplanes

Science.gov (United States)

2012-04-10

... Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at...: Discussion We issued a supplemental notice of proposed rulemaking (SNPRM) to amend 14 CFR part 39 to include... in issue 3, dated 13 September 2011, for the English language version and in issue 2, dated 22...

78 FR 70209 - Airworthiness Directives; XtremeAir GmbH Airplanes

Science.gov (United States)

2013-11-25

... Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA... INFORMATION: Discussion The European Aviation Safety Agency (EASA), which is the Technical Agent [[Page 70210...-2013-008, Ausgabe (English translation: Version) A.03, dated October 25, 2013. The replacement required...

76 FR 76330 - Airworthiness Directives; DG Flugzeugbau GmbH Sailplanes

Science.gov (United States)

2011-12-07

... Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at... proposed AD. Discussion The European Aviation Safety Agency (EASA), which is the Technical Agent for the... 13 September 2011, for the English language version and in issue 2, dated 22 October 2008, for the...

78 FR 40047 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2013-07-03

... through Friday, except Federal holidays. The AD docket contains this proposed AD, the economic evaluation... entities under the criteria of the Regulatory Flexibility Act. We prepared an economic evaluation of the..., P2, P2+, T1, T2, and T2+ helicopters, serial number (S/N) 0005 through 00829, with a tail rotor...

77 FR 69558 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Science.gov (United States)

2012-11-20

..., EC135 T2, and EC135 T2+ helicopters. This is the Federal Register publication of an Emergency AD (EAD... through Friday, except Federal holidays. The AD docket contains this AD, the economic evaluation, any... economic evaluation of the estimated costs to comply with this AD and placed it in the AD docket. List of...

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development program 2001 and program budget 2001

International Nuclear Information System (INIS)

2001-01-01

The Karlsruhe Research Center is a national research center founded and substantially funded by the German Federal Government and the Land government of Baden-Wuerttemberg, the federal state where it is located. It is a member of the Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren and is one of the most important, independent research centers in Germany working in the fields of the natural sciences and engineering sciences. The Center's R and D programmes encompass research activities up to pre-industrial scale as well as product and process development, research for precautionary policy and purposes, and fundamental research. The focal points of the R and D programme 2001 are explained under the following subject titles: - Environment - Public Health - Energy - Key Technologies - Fundamental Research. The programme reveals the shift of emphasis of activities which commenced in the early 1980s, away from nuclear engineering as the major focus in the early days towards a much wider spectrum of activities today, characterized by aspects such as complexity of tasks, long-term planning, and the need for cross-disciplinary and multilateral cooperation. The second volume of the publication explains the programme budget and apportionment of funds. (orig./CB) [de

ECO steam explosion experiments on the conversion of thermal into mechanical energy

International Nuclear Information System (INIS)

Cherdron, W.; Kaiser, A.; Schuetz, W.; Will, H.

2001-01-01

In case of a steam explosion, e.g. as a consequence of a severe reactor accident, part of the thermal energy of the melt is transferred into mechanical energy. At Forschungszentrum Karlsruhe, so-called ECO experiments, are being directed to measure the conversion factor under well-defined conditions. In ECO, alumina from a thermite reaction is used as a simulating material instead of corium. Dimensions of the test facility as well as major test conditions, e.g. temperature and release mode of the melt, water inventory and test procedure, are based on the former PREMIX experimental series. In the paper, results of the first test, ECO 01, are given. (orig.)

Constrained minimization in C ++ environment

International Nuclear Information System (INIS)

Dymov, S.N.; Kurbatov, V.S.; Silin, I.N.; Yashchenko, S.V.

1998-01-01

Based on the ideas, proposed by one of the authors (I.N.Silin), the suitable software was developed for constrained data fitting. Constraints may be of the arbitrary type: equalities and inequalities. The simplest of possible ways was used. Widely known program FUMILI was realized to the C ++ language. Constraints in the form of inequalities φ (θ i ) ≥ a were taken into account by change into equalities φ (θ i ) = t and simple inequalities of type t ≥ a. The equalities were taken into account by means of quadratic penalty functions. The suitable software was tested on the model data of the ANKE setup (COSY accelerator, Forschungszentrum Juelich, Germany)

Cross section ratio and angular distributions of the reaction p + d → {sup 3}He + η at 48.8 MeV and 59.8 MeV excess energy

Energy Technology Data Exchange (ETDEWEB)

Adlarson, P.; Calen, H.; Fransson, K.; Gullstroem, C.O.; Heijkenskjoeld, L.; Hoeistad, B.; Johansson, T.; Marciniewski, P.; Redmer, C.F.; Wolke, M.; Zlomanczuk, J. [Uppsala University, Division of Nuclear Physics, Department of Physics and Astronomy, Box 516, Uppsala (Sweden); Augustyniak, W.; Marianski, B.; Morsch, H.P.; Trzcinski, A.; Zupranski, P. [National Centre for Nuclear Research, Department of Nuclear Physics, Warsaw (Poland); Bardan, W.; Ciepal, I.; Czerwinski, E.; Hodana, M.; Jany, A.; Jany, B.R.; Jarczyk, L.; Kamys, B.; Kistryn, S.; Krzemien, W.; Magiera, A.; Moskal, P.; Ozerianska, I.; Podkopal, P.; Rudy, Z.; Skurzok, M.; Smyrski, J.; Wronska, A.; Zielinski, M.J. [Jagiellonian University, Institute of Physics, Krakow (Poland); Bashkanov, M.; Clement, H.; Doroshkevich, E.; Perez del Rio, E.; Pricking, A.; Skorodko, T.; Wagner, G.J. [Eberhard-Karls-Universitaet Tuebingen, Physikalisches Institut, Tuebingen (Germany); Physikalisches Institut der Universitaet Tuebingen, Kepler Center fuer Astro- und Teilchenphysik, Tuebingen (Germany); Bergmann, F.S.; Demmich, K.; Goslawski, P.; Huesken, N.; Khoukaz, A.; Passfeld, A.; Taeschner, A. [Westfaelische Wilhelms-Universitaet Muenster, Institut fuer Kernphysik, Muenster (Germany); Berlowski, M.; Stepaniak, J. [National Centre for Nuclear Research, High Energy Physics Department, Warsaw (Poland); Bhatt, H.; Lalwani, K.; Varma, R. [Indian Institute of Technology Bombay, Department of Physics, Mumbai, Maharashtra (India); Buescher, M.; Engels, R.; Goldenbaum, F.; Hejny, V.; Khan, F.A.; Lersch, D.; Lorentz, B.; Maier, R.; Ohm, H.; Prasuhn, D.; Schadmand, S.; Sefzick, T.; Stassen, R.; Sterzenbach, G.; Stockhorst, H.; Stroeher, H.; Wurm, P.; Zurek, M. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Coderre, D.; Ritman, J. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Ruhr-Universitaet Bochum, Institut fuer Experimentalphysik I, Bochum (Germany); Erven, A.; Erven, W.; Kemmerling, G.; Kleines, H.; Wuestner, P. [Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Forschungszentrum Juelich, Zentralinstitut fuer Engineering, Elektronik und Analytik, Juelich (Germany); Eyrich, W.; Hauenstein, F.; Krapp, M.; Zink, A. [Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Physikalisches Institut, Erlangen (Germany); Fedorets, P. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); State Scientific Center of the Russian Federation, Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Foehl, K. [Justus-Liebig-Universitaet Giessen, II. Physikalisches Institut, Giessen (Germany); Goswami, A. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); Indian Institute of Technology Indore, Department of Physics, Indore, Madhya Pradesh (India); Grigoryev, K. [Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (Germany); RWTH Aachen, III. Physikalisches Institut B, Physikzentrum, Aachen (Germany); Petersburg Nuclear Physics Institute, High Energy Physics Division, Leningrad district (Russian Federation); Kirillov, D.A.; Piskunov, N.M. [Joint Institute for Nuclear Physics, Veksler and Baldin Laboratory of High Energiy Physics, Moscow region (Russian Federation); Klos, B.; Stephan, E.; Weglorz, W. [University of Silesia, August Chelkowski Institute of Physics, Katowice (Poland); Kulessa, P.; Pysz, K.; Siudak, R.; Szczurek, A. [Polish Academy of Sciences, The Henryk Niewodniczanski Institute of Nuclear Physics, Krakow (Poland); Kupsc, A.; Pszczel, D. [Uppsala University, Division of Nuclear Physics, Department of Physics and Astronomy, Box 516, Uppsala (Sweden); National Centre for Nuclear Research, High Energy Physics Department, Warsaw (Poland); Mikirtychiants, M. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (Germany); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (DE); Ruhr-Universitaet Bochum, Institut fuer Experimentalphysik I, Bochum (DE); Petersburg Nuclear Physics Institute, High Energy Physics Division, Leningrad district (RU); Pyszniak, A. [Uppsala University, Division of Nuclear Physics, Department of Physics and Astronomy, Box 516, Uppsala (SE); Jagiellonian University, Institute of Physics, Krakow (PL); Roy, A. [Indian Institute of Technology Indore, Department of Physics, Indore, Madhya Pradesh (IN); Sawant, S. [Indian Institute of Technology Bombay, Department of Physics, Mumbai, Maharashtra (IN); Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (DE); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (DE); Serdyuk, V. [Forschungszentrum Juelich, Institut fuer Kernphysik, Juelich (DE); Forschungszentrum Juelich, Juelich Center for Hadron Physics, Juelich (DE); Joint Institute for Nuclear Physics, Dzhelepov Laboratory of Nuclear Problems, Moscow region (RU); Sopov, V. [State Scientific Center of the Russian Federation, Institute for Theoretical and Experimental Physics, Moscow (RU); Yamamoto, A. [High Energy Accelerator Research Organization KEK, Tsukuba, Ibaraki (JP); Yurev, L. [Joint Institute for Nuclear Physics, Dzhelepov Laboratory of Nuclear Problems, Moscow region (RU); Zabierowski, J. [National Centre for Nuclear Research, Department of Cosmic Ray Physics, Lodz (PL); Collaboration: WASA-at-COSY Collaboration

2014-06-15

We present new data for angular distributions and on the cross section ratio of the p+d → {sup 3}He + η reaction at excess energies of Q = 48.8 MeV and Q = 59.8 MeV. The data have been obtained at the WASA-at-COSY experiment (Forschungszentrum Juelich) using a proton beam and a deuterium pellet target. While the shape of obtained angular distributions show only a slow variation with the energy, the new results indicate a distinct and unexpected total cross section fluctuation between Q = 20 MeV and Q = 60 MeV, which might indicate the variation of the production mechanism within this energy interval. (orig.)

Cs2Te normal conducting photocathodes in the superconducting rf gun

CERN Document Server

Xiang, R; Buettig, H; Janssen, D; Justus, M; Lehnert, U; Michel, P; Murcek, P; Schamlott, A; Schneider, Ch; Schurig, R; Staufenbiel, F; Teichert, J

2010-01-01

The superconducting radio frequency photoinjector (SRF gun) is one of the latest applications of superconducting rf technology in the accelerator field. Since superconducting photocathodes with high quantum efficiency are yet unavailable, normal conducting cathode material is the main choice for SRF photoinjectors. However, the compatibility between the photocathode and the cavity is one of the challenges for this concept. Recently, a SRF gun with Cs2Te cathode has been successfully operated in Forschungszentrum Dresden-Rossendorf. In this paper, we will present the physical properties of Cs2Te photocathodes in the SC cavity, such as the quantum efficiency, the lifetime, the rejuvenation, the charge saturation, and the dark current.

Cross section ratio and angular distributions of the reaction p + d → 3He + η at 48.8 MeV and 59.8 MeV excess energy

International Nuclear Information System (INIS)

Adlarson, P.; Calen, H.; Fransson, K.; Gullstroem, C.O.; Heijkenskjoeld, L.; Hoeistad, B.; Johansson, T.; Marciniewski, P.; Redmer, C.F.; Wolke, M.; Zlomanczuk, J.; Augustyniak, W.; Marianski, B.; Morsch, H.P.; Trzcinski, A.; Zupranski, P.; Bardan, W.; Ciepal, I.; Czerwinski, E.; Hodana, M.; Jany, A.; Jany, B.R.; Jarczyk, L.; Kamys, B.; Kistryn, S.; Krzemien, W.; Magiera, A.; Moskal, P.; Ozerianska, I.; Podkopal, P.; Rudy, Z.; Skurzok, M.; Smyrski, J.; Wronska, A.; Zielinski, M.J.; Bashkanov, M.; Clement, H.; Doroshkevich, E.; Perez del Rio, E.; Pricking, A.; Skorodko, T.; Wagner, G.J.; Bergmann, F.S.; Demmich, K.; Goslawski, P.; Huesken, N.; Khoukaz, A.; Passfeld, A.; Taeschner, A.; Berlowski, M.; Stepaniak, J.; Bhatt, H.; Lalwani, K.; Varma, R.; Buescher, M.; Engels, R.; Goldenbaum, F.; Hejny, V.; Khan, F.A.; Lersch, D.; Lorentz, B.; Maier, R.; Ohm, H.; Prasuhn, D.; Schadmand, S.; Sefzick, T.; Stassen, R.; Sterzenbach, G.; Stockhorst, H.; Stroeher, H.; Wurm, P.; Zurek, M.; Coderre, D.; Ritman, J.; Erven, A.; Erven, W.; Kemmerling, G.; Kleines, H.; Wuestner, P.; Eyrich, W.; Hauenstein, F.; Krapp, M.; Zink, A.; Fedorets, P.; Foehl, K.; Goswami, A.; Grigoryev, K.; Kirillov, D.A.; Piskunov, N.M.; Klos, B.; Stephan, E.; Weglorz, W.; Kulessa, P.; Pysz, K.; Siudak, R.; Szczurek, A.; Kupsc, A.; Pszczel, D.; Mikirtychiants, M.; Pyszniak, A.; Roy, A.; Sawant, S.; Serdyuk, V.; Sopov, V.; Yamamoto, A.; Yurev, L.; Zabierowski, J.

2014-01-01

We present new data for angular distributions and on the cross section ratio of the p+d → 3 He + η reaction at excess energies of Q = 48.8 MeV and Q = 59.8 MeV. The data have been obtained at the WASA-at-COSY experiment (Forschungszentrum Juelich) using a proton beam and a deuterium pellet target. While the shape of obtained angular distributions show only a slow variation with the energy, the new results indicate a distinct and unexpected total cross section fluctuation between Q = 20 MeV and Q = 60 MeV, which might indicate the variation of the production mechanism within this energy interval. (orig.)

Search for electric dipole moments in storage rings

Directory of Open Access Journals (Sweden)

Lenisa Paolo

2016-01-01

Full Text Available The JEDI collaboration aims at making use of storage ring to provide the most precise measurement of the electric dipole moments of hadrons. The method makes exploits a longitudinal polarized beam. The existence an electric dipole moment would generate a torque slowly twisting the particle spin out of plan of the storage ring into the vertical direction. The observation of non zero electric dipole moment would represent a clear sign of new physics beyond the Standard Model. Feasiblity tests are presently undergoing at the COSY storage ring Forschungszentrum Jülich (Germany, to develop the novel techniques to be implemented in a future dedicated storage ring.

Experiences with interpretation and application of the German Atomic Energy Act for the German research reactors in Geesthacht FRG-1 and FRG-2

International Nuclear Information System (INIS)

Krull, W.

1980-01-01

The German research reactors FRG-1 and FRG-2 have passed different types of licensing procedures in the past years. It is reported about the experiences we have got in the interpretation and application of section 7 of the German Atomic Energy Act. Following these experiences an estimation is done for the licensing procedure for the reduction of the uranium enrichment. (orig.) [de

The inhomogeneous MUSIG model for the simulation of polydispersed flows

International Nuclear Information System (INIS)

Krepper, Eckhard; Lucas, Dirk; Frank, Thomas; Prasser, Horst-Michael; Zwart, Phil J.

2008-01-01

A generalized inhomogeneous multiple size group (MUSIG) model based on the Eulerian modeling framework was developed in close cooperation of ANSYS-CFX and Forschungszentrum Dresden-Rossendorf and implemented into the CFD code CFX. The model enables the subdivision of the dispersed phase into a number of size groups regarding the mass balance as well as regarding the momentum balance. In this work, the special case of polydispersed bubbly flow is considered. By simulating such flows, the mass exchanged between bubble size classes by bubble coalescence and bubble fragmentation, as well as the momentum transfer between the bubbles and the surrounding liquid due to bubble size dependent interfacial forces have to be considered. Particularly the lift force has been proven to play an important role in establishing a certain bubble size distribution dependent flow regime. In a previous study [Krepper, E., Lucas, D., Prasser, H.-M., 2005. On the modeling of bubbly flow in vertical pipes. Nucl. Eng. Des. 235, 597-611] the application of such effects were considered and justified and a general outline of such a model concept was given. In this paper the model and its validation for several vertical pipe flow situations is presented. The experimental data were obtained from the TOPFLOW test facility at the Forschungszentrum Dresden-Rossendorf (FZD). The wire-mesh technology measuring local gas volume fractions, bubble size distributions and velocities of gas and liquid phases were employed. The inhomogeneous MUSIG model approach was shown as capable of describing bubbly flows with higher gas content. Particularly the separation phenomenon of small and large bubbles is well described. This separation has been proven as a key phenomenon in the establishment of the corresponding flow regime. Weaknesses in this approach can be attributed to the characterization of bubble coalescence and bubble fragmentation, which must be further investigated

Department of Material Studies - Overview

International Nuclear Information System (INIS)

Werner, Z.

2009-01-01

Full text: The technology of modifying surfaces of technological materials by means of continuous and pulsed energy and particle beams has been intensely studied for more than 20 years. In some fields, it is currently utilized on a wide scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used in this area. The research carried by Department P-IX is centered on applications of our two ion implantation facilities (ion implanters) of different kinds and unique sources of high-intensity intense plasma pulses, operated by the Department of Plasma Physics. The Department cooperates closely with Forschungszentrum Rossendorf (FZR, Dresden, Germany) in the field of analytical ion beam techniques and the use of unique ion implantation facilities. The main objectives of the Department are: · the search for new ways of modifying the surface properties of solid materials by means of continuous or pulsed ion and plasma beams and · the implementation of ion implantation techniques in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2008, research was focused on: · ion implantation/plasma treatment of ceramics aimed at improving their wettability in ceramic-metal joints, · ion beam synthesis and plasma pulse activation of superconducting MgB 2 phases, · cobalt and zirconium inclusions in conducting layers produced in oxide insulators (Al 2 O 3 ) by ion implantation and thermal annealing. Research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), Institute of Molecular Physics, Polish Academy of Sciences (Poznan), Institute of Chemical Physics PAS and Forschungszentrum Rossendorf FZR (Dresden, Germany), as well as with some industrial companies. (author)

Deep X-ray lithography for the fabrication of microstructures at ELSA

Energy Technology Data Exchange (ETDEWEB)

Pantenburg, F.J. E-mail: pantenburg@imt.fzk.de; Mohr, J

2001-07-21

Two beamlines at the Electron Stretcher Accelerator (ELSA) of Bonn University are dedicated for the production of microstructures by deep X-ray lithography with synchrotron radiation. They are equipped with state-of-the-art X-ray scanners, maintained and used by Forschungszentrum Karlsruhe. Polymer microstructure heights between 30 and 3000 {mu}m are manufactured regularly for research and industrial projects. This requires different characteristic energies. Therefore, ELSA operates routinely at 1.6, 2.3 and 2.7 GeV, for high-resolution X-ray mask fabrication, deep and ultra-deep X-ray lithography, respectively. The experimental setup, as well as the structure quality of deep and ultra deep X-ray lithographic microstructures are described.

The hydrogen generated as a gas and storage in Zircaloy during water quenching

International Nuclear Information System (INIS)

Garcia, Eduardo A.

1999-01-01

A simple one-dimensional diffusion model has been developed for the complex process of Zircaloy oxidation during water quenching, calculating the hydrogen liberated as a gas and the hydrogen stored in the metal. The model was developed on the basis of small-scale separate-effects quench experiments performed at Forschungszentrum Karlsruhe. The new oxide surface and the new metallic surface produced by cracking of the oxide during quenching are calculated for each experiment performed at 1200 , 1400 and 1600 C degrees using as-received Zircaloy-4 (no pre oxidation) and with Zircaloy specimens pre oxidised to give oxide thicknesses of 100μm and 300μm. The results are relevant to accident management in light water reactors. (author)

(Fuel, fission product, and graphite technology)

Energy Technology Data Exchange (ETDEWEB)

Stansfield, O.M.

1990-07-25

Travel to the Forschungszentrum (KFA) -- Juelich described in this report was for the purpose of participating in the annual meeting of subprogram managers for the US/DOE Umbrella Agreement for Fuel, Fission Product, and Graphite Technology. At this meeting the highlights of the cooperative exchange were reviewed for the time period June 1989 through June 1990. The program continues to contribute technology in an effective way for both countries. Revision 15 of the Subprogram Plan will be issued as a result of the meeting. There was interest expressed by KFA management in the level of support received from the NPR program and in potential participation in the COMEDIE loop experiment being conducted at the CEA.

Cs_{2}Te normal conducting photocathodes in the superconducting rf gun

Directory of Open Access Journals (Sweden)

R. Xiang

2010-04-01

Full Text Available The superconducting radio frequency photoinjector (SRF gun is one of the latest applications of superconducting rf technology in the accelerator field. Since superconducting photocathodes with high quantum efficiency are yet unavailable, normal conducting cathode material is the main choice for SRF photoinjectors. However, the compatibility between the photocathode and the cavity is one of the challenges for this concept. Recently, a SRF gun with Cs_{2}Te cathode has been successfully operated in Forschungszentrum Dresden-Rossendorf. In this paper, we will present the physical properties of Cs_{2}Te photocathodes in the SC cavity, such as the quantum efficiency, the lifetime, the rejuvenation, the charge saturation, and the dark current.

Modelling of Cold Water Hammer with WAHA code

International Nuclear Information System (INIS)

Gale, J.; Tiselj, I.

2003-01-01

The Cold Water Hammer experiment described in the present paper is a simple facility where overpressure accelerates a column of liquid water into the steam bubble at the closed vertical end of the pipe. Severe water hammer with high pressure peak occurs when the vapor bubble condenses and the liquid column hits the closed end of the pipe. Experimental data of Forschungszentrum Rossendorf are being used to test the newly developed computer code WAHA and the computer code RELAP5. Results show that a small amount of noncondensable air in the steam bubble significantly affects the magnitude of the calculated pressure peak, while the wall friction and condensation rate only slightly affect the simulated phenomena. (author)

Deep X-ray lithography for the fabrication of microstructures at ELSA

Science.gov (United States)

Pantenburg, F. J.; Mohr, J.

2001-07-01

Two beamlines at the Electron Stretcher Accelerator (ELSA) of Bonn University are dedicated for the production of microstructures by deep X-ray lithography with synchrotron radiation. They are equipped with state-of-the-art X-ray scanners, maintained and used by Forschungszentrum Karlsruhe. Polymer microstructure heights between 30 and 3000 μm are manufactured regularly for research and industrial projects. This requires different characteristic energies. Therefore, ELSA operates routinely at 1.6, 2.3 and 2.7 GeV, for high-resolution X-ray mask fabrication, deep and ultra-deep X-ray lithography, respectively. The experimental setup, as well as the structure quality of deep and ultra deep X-ray lithographic microstructures are described.

Deep X-ray lithography for the fabrication of microstructures at ELSA

International Nuclear Information System (INIS)

Pantenburg, F.J.; Mohr, J.

2001-01-01

Two beamlines at the Electron Stretcher Accelerator (ELSA) of Bonn University are dedicated for the production of microstructures by deep X-ray lithography with synchrotron radiation. They are equipped with state-of-the-art X-ray scanners, maintained and used by Forschungszentrum Karlsruhe. Polymer microstructure heights between 30 and 3000 μm are manufactured regularly for research and industrial projects. This requires different characteristic energies. Therefore, ELSA operates routinely at 1.6, 2.3 and 2.7 GeV, for high-resolution X-ray mask fabrication, deep and ultra-deep X-ray lithography, respectively. The experimental setup, as well as the structure quality of deep and ultra deep X-ray lithographic microstructures are described

Deep X-ray lithography for the fabrication of microstructures at ELSA

CERN Document Server

Pantenburg, F J

2001-01-01

Two beamlines at the Electron Stretcher Accelerator (ELSA) of Bonn University are dedicated for the production of microstructures by deep X-ray lithography with synchrotron radiation. They are equipped with state-of-the-art X-ray scanners, maintained and used by Forschungszentrum Karlsruhe. Polymer microstructure heights between 30 and 3000 mu m are manufactured regularly for research and industrial projects. This requires different characteristic energies. Therefore, ELSA operates routinely at 1.6, 2.3 and 2.7 GeV, for high-resolution X-ray mask fabrication, deep and ultra-deep X-ray lithography, respectively. The experimental setup, as well as the structure quality of deep and ultra deep X-ray lithographic microstructures are described.

77 FR 3583 - Airworthiness Directives; 328 Support Services GmbH Airplanes

Science.gov (United States)

2012-01-25

... intervals and associated corrective actions into the operator's approved maintenance programme. You may... reduced repetitive inspection intervals for the flight controls certification maintenance requirements (CMR) of the tab-to-actuator linkage. This AD requires revising the airplane maintenance program by...

78 FR 23696 - Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Helicopters

Science.gov (United States)

2013-04-22

... longitudinal main rotor actuator piston after shut-down of the external pump drive, during rigging of the main... rotor controls, of movement of the longitudinal main rotor actuator piston after shut-down of the external pump drive. Such movement could cause incorrect rigging results. The proposed actions are intended...

78 FR 52412 - Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Helicopters

Science.gov (United States)

2013-08-23

... movement of the longitudinal main rotor actuator piston after shut-down of the external pump drive. Such... of the main rotor controls, it was discovered that the piston of the longitudinal main rotor actuator had moved after shut-down of the external pump drive. Comments We gave the public the opportunity to...

78 FR 40642 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2013-07-08

... landing gear attachment lever causes the rod end to bend at each gear retraction sequence. We are issuing... Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this... Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone...

78 FR 59223 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Science.gov (United States)

2013-09-26

... safety washer and the nose landing gear attachment lever causes the rod end to bend at each gear... information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information...: Mike Kiesov, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City...

78 FR 77567 - Airworthiness Directives; Schempp-Hirth Flugzeugbau GmbH Gliders

Science.gov (United States)

2013-12-24

... Document Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building... in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except...) of this AD: This service information contains German to English translation. EASA used the English...

Nuclear fusion project. Annual report of the Association Forschungszentrum Karlsruhe/EURATOM. October 1994 - September 1995

International Nuclear Information System (INIS)

Kast, G.

1996-01-01

Today about fifty percent of FZK's fusion programme is contracted to ITER via the contribution of the European home team. With the recent selection of blanket concepts in the European frame, a concentration process has been initiated which will result in some restructuring of the blanket programme. The results are documented. Closely related to blanket development is the long term materials programme. FZK has concentrated on reduced activation ferritic-martensitic steels. Important project resources for irradiation and hot cell work are devoted to characterize and improve the performance of suitable structural materials. ITER references are given in the nomenclature. The annexes provide with some information on departments and project management. (DG)

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development program 1995. As of December 2, 1994

International Nuclear Information System (INIS)

1995-01-01

After giving a survey of the major research areas of the Centre the author explains the projects in the fields of environment, energy, microsystems engineering and fundamental research. The medium-term aim, present state of development, 1995 programme, cooperation within the centre, cooperation with external partners and financial expenditure are explained on a project-by-project basis. (UA) [de

Radiation Safety Report 2003, Forschungszentrum Rossendorf e.V. and Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V.; Jahresbericht Strahlenschutz 2003 des Forschungszentrums Rossendorf e.V. und des Vereins fuer Kernverfahrenstechnik und Analytik Rossendorf e.V.

Energy Technology Data Exchange (ETDEWEB)

Sahre, P. (comp.)

2004-03-01

The annual report contains information and measured data obtained with the routine monitoring and measuring activities performed in 2003 at the VKTA and the nuclear research center, FZR, referring to health physics measurements and individual dosimetry of internal and external personnel, and ambient radioactivity monitoring in the area of the two facilities. [German] Der Jahresbericht informiert ueber die Taetigkeiten und die Messwerte des Jahres 2003, die im VKTA und FZR routinemaessig durchgefuehrt und gemessen wurden in den Bereichen: 1. Personenueberwachung, berufliche Strahlenexposition von internen Mitarbeitern oder externem Personal von Fremdfirmen. 2. Strahlenschutzumgebungsueberwachung. (orig./AJ)

Contributions for the third international carbon conference CARBON '80

International Nuclear Information System (INIS)

Delle, W.

1980-05-01

This report is a compilation of 8 papers prepared by KFA Juelich GmbH for the International Carbon Conference carbon 80 in Baden-Baden. The contributions deal mainly with materials problems which arise from the application of graphite and silicon carbide in High-Temperature Gas-Cooled Reactors, HTR. Most of the results described were obtained in the framework of the HTR Projects ''Hochtemperaturreaktor-Brennstoffkreislauf'' (High Temperature Reactor Fuel Cycle), HBK, that includes the partners Gesellschaft fuer Hochtemperaturreaktor-Technik mbH, Hochtemperaturreaktor-Brennelement GmbH, Hochtemperatur-Reaktorbau GmbH, Kernforschungsanlage Juelich GmbH, NUKEM GmbH and Sigri Elektrographit GmbH/Ringsdorff-Werke GmbH and ''Prototyp Nukleare Prozesswaerme'' (Prototype Nuclear Heat), PNP, for the development of procedures for the conversion of solid fossil raw materials by means of heat from High Temperature Gas-Cooled Reactors, that includes the partners Bergbau-Forschung GmbH, Gesellschaft fuer Hochtemperaturreaktor-Technik mbH, Hochtemperatur-Reaktorbau GmbH, Kernforschungsanlage Juelich GmbH and Rheinische Braunkohlenwerke AG. Both projects are financed by the Federal Ministry for Research and Technology and the State of North Rhine-Westphalia. (orig./IHOE) [de

Neustart des LHC CERN und die Beschleuniger : die Weltmaschine anschaulich erklärt

CERN Document Server

Hauschild, Michael

2016-01-01

Michael Hauschild führt den Leser dieses essentials zurück zu den Anfängen des CERN, des Europäischen Forschungszentrums für Teilchenphysik bei Genf; einem der faszinierendsten Forschungszentren überhaupt, zu seiner Geschichte, zu seinen Menschen und seinen Beschleunigern. Der Autor erläutert die Funktionsweise von Teilchenbeschleunigern und wie ausgehend von den ersten Ideen schließlich der Large Hadron Collider LHC gebaut wurde, der größte Teilchenbeschleuniger der Welt und die heutige Weltmaschine. Nach einer Pause von mehr als zwei Jahren wurde der LHC im Frühjahr 2015 wieder in Betrieb genommen, um mit höherer Energie als je zuvor die Geheimnisse der Natur zu enträtseln.

He-cooled divertor for DEMO: Experimental verification of the conceptual modular design

International Nuclear Information System (INIS)

Norajitra, P.; Gervash, A.; Giniyatulin, R.; Ihli, T.; Krauss, W.; Kruessmann, R.; Kuznetsov, V.; Makhankov, A.; Mazul, I.; Ovchinnikov, I.

2006-01-01

A modular He-cooled divertor concept is being developed at the Forschungszentrum Karlsruhe. The design goal is to withstand a high heat flux of 10 MW/m 2 at least. The work programme of 2004 focused on experiments to verify the design and thermohydraulics layout. In cooperation with the Efremov Institute, experimental investigations were performed for the joining of tungsten parts and/or tungsten parts with steel and the fabrication of divertor components from tungsten. Moreover, gas puffing experiments were carried out with a stationary approach to measuring pressure loss and heat transfer for the purpose of screening the design options and verifying the computational fluid dynamics (CFD) calculations. The status and results of the technological and helium experiments shall be outlined in this report

CBM experiment. Characterization studies of the detector modules for silicon tracking syste

Directory of Open Access Journals (Sweden)

I. V. Panasenko

2013-09-01

Full Text Available The double-sided silicon microstrip detector prototypes with 50 μm pitch developed together with CiS, Germany, have been characterized in a 2.4 GeV/c proton beam at COSY, Forschungszentrum Jülich, Germany. Data analyses including reconstruction of 1-strip and 2-strip clusters have been performed. We have done the study of charge sharing in the interstrip gap. In particular it was found that there is a charge loss of less than 10 % in the interstrip gap. The calculated signal-to-noise ratio is around 19 for the p-side of the sensor and it is sufficient for hit reconstruction. Also the charge sharing function which allows more precise determination of the hit position in silicon sensor, have been reconstructed.

Investigations on sump cooling after core melt down

Energy Technology Data Exchange (ETDEWEB)

Knebel, J.U. [Forschungeszentrum Karlsruhe - Technik und Umwelt Institut fuer Angewandte Thermo- und Fluiddynamik, Karlsruhe (Germany)

1995-09-01

This article presents the basic physical phenomena and scaling criteria of decay heat removal from a large coolant pool by single-phase and two-phase natural circulation flow. The physical significance of the dimensionless similarity groups derived is evaluated. The above results are applied to the SUCO program that is performed at the Forschungszentrum Karlsruhe. The SUCO program is a three-step series of scaled model experiments investigating the possibility of an optional sump cooling concept for the European Pressurized Water Reactor EPR. This concept is entirely based on passive safety features within the containment. The work is supported by the German utilities and the Siemens dimensional SUCOS-2D test facility. The experimental results of the model geometry are transformed to prototypic conditions.

Investigations on sump cooling after core melt down

International Nuclear Information System (INIS)

Knebel, J.U.

1995-01-01

This article presents the basic physical phenomena and scaling criteria of decay heat removal from a large coolant pool by single-phase and two-phase natural circulation flow. The physical significance of the dimensionless similarity groups derived is evaluated. The above results are applied to the SUCO program that is performed at the Forschungszentrum Karlsruhe. The SUCO program is a three-step series of scaled model experiments investigating the possibility of an optional sump cooling concept for the European Pressurized Water Reactor EPR. This concept is entirely based on passive safety features within the containment. The work is supported by the German utilities and the Siemens dimensional SUCOS-2D test facility. The experimental results of the model geometry are transformed to prototypic conditions

The hydrogen generated as a gas and storage in Zircaloy during steam quenching

International Nuclear Information System (INIS)

Garcia, Eduardo A.

2000-01-01

A simple one-dimensional diffusion model has been developed for the complex process of Zircaloy oxidation during steam quenching, calculating the hydrogen liberated as a gas and the hydrogen stored in the metal. The model was developed on the basis of small-scale separate-effects quench experiments performed at Forschungszentrum Karlsruhe. The new oxide surface and the new metallic surface produced by cracking of the oxide during quenching are calculated for each experiment performed at 1200 centigrade, 1400 centigrade and 1600 centigrade using as-received Zircaloy-4 (no pre-oxidation) and with Zircaloy specimens pre-oxidized to give oxide thickness of 100μm and 300μm. The results are relevant to accident management in nuclear power plants. (author)

Magnetic field distribution inside the aperture of a steerer magnet prototype

International Nuclear Information System (INIS)

Chiriţă, Ionel; Dan, Daniel; Tănase, Nicolae

2015-01-01

The High Energy Storage Ring (HESR), an important part of the Facility for Antiproton and Ion Research (FAIR) international project [1], which will be set up in Darmstadt in the next years, contains, among other magnets, several corrector magnets used for vertical and horizontal beam deviation. A prototype of a 2mrad vertical steerer magnet was designed by National Institute for R and D in Electrical Engineering (ICPE-CA) Romania in close cooperation with Forschungszentrum Jülich Germany [2] and then manufactured and tested by ICPE-CA [3], Romanian Institute for Electrical Engineering—Advanced Research. Magnetic field measurements using a 3D Hall probe were performed. Measured data and their analysis are presented. The system used for Hall probe positioning and data acquisition is also described. (paper)

The Radiation Source ELBE and its Research Program in Nuclear Physics

International Nuclear Information System (INIS)

Lehnert, U.; Michel, P.; Schwengner, R.

2005-01-01

The new radiation source 'Strahlungsquelle ELBE' at the Forschungszentrum Rossendorf (FZR) near Dresden, Germany, is a user facility that utilizes a superconducting linear accelerator to produce various secondary beams for experiments in nuclear science, solid state physics, materials research, environmental chemistry and in the life sciences. The high brilliance electron beam of up to 40 MeV and 1 mA (cw) is mainly used to drive free electron lasers producing infrared light in the 5-150 μm wavelength region. Additionally, polarized MeV-Bremsstrahlung and X-rays from electron channeling are available, facilities for neutron and positron production are under construction. The talk outlines the ongoing research activities at ELBE with special attention to the nuclear resonance fluorescence experiments

Hydropower plants as provider of TSO purchased services using the example of E.ON Wasserkraft GmbH; Wasserkraft als Netzdienstleister am Beispiel der E.ON Wasserkraft GmbH

Energy Technology Data Exchange (ETDEWEB)

Brucker, Michael [E.ON Wasserkraft GmbH, Landshut (Germany)

2012-07-01

Hydro power plants provide comprehensive TSO purchased services for the 50-Hz-grid as well as for the 16.7-Hz-grid of Deutsche Bahn (German Railway). Within the E.ON generation portfolio in Germany hydro power plants achieve the lion's share of revenues in TSO purchased services (primary control, secondary control, minute reserve). Although the possibility to build new hydro generation capacities is limited in Germany by nature, it is possible to increase the offer for TSO purchased services. This paper explains the different aspects of TSO purchases services provided by hydro power plants. (orig.)

Nuclear safety research in HGF 2012

International Nuclear Information System (INIS)

Anon.

2013-01-01

Nuclear Competence Association. The Forschungszentrum Juelich GmbH, HZDR Helmholtz-Zentrum Dresden-Rossendorf and the KIT Karlsruhe Institute of Technology are involved in the Nuclear Safety Research Program within the Helmholtz Association. The work and results in 2012 are presented. (orig.)

Fuel cells science and engineering. Materials, processes, systems and technology. Vol. 1

Energy Technology Data Exchange (ETDEWEB)

Stolten, Detlef; Emonts, Bernd (eds.) [Forschungszentrum Juelich GmbH (DE). Inst. fuer Energieforschung (IEF), Brennstoffzellen (IEF-3)

2012-07-01

The first volume is divided in four parts and 22 chapters. It is structured as follows: PART I: Technology. Chapter 1: Technical Advancement of Fuel-Cell Research and Development (Dr. Bernd Emonts, Ludger Blum, Thomas Grube, Werner Lehnert, Juergen Mergel, Martin Mueller and Ralf Peters); 2: Single-Chamber Fuel Cells (Teko W. Napporn and Melanie Kuhn); 3: Technology and Applications of Molten Carbonate Fuel Cells (Barbara Bosio, Elisabetta Arato and Paolo Greppi); 4: Alkaline Fuel Cells (Erich Guelzow); 5: Micro Fuel Cells (Ulf Groos and Dietmar Gerteisen); 6: Principles and Technology of Microbial Fuel Cells (Jan B. A. Arends, Joachim Desloover, Sebastia Puig and Willy Verstraete); 7: Micro-Reactors for Fuel Processing (Gunther Kolb); 8: Regenerative Fuel Cells (Martin Mueller). PART II: Materials and Production Processes. Chapter 9: Advances in Solid Oxide Fuel Cell Development between 1995 and 2010 at Forschungszentrum Juelich GmbH, Germany (Vincent Haanappel); 10: Solid Oxide Fuel Cell Electrode Fabrication by Infiltration (Evren Gunen); 11: Sealing Technology for Solid Oxide Fuel Cells (K. Scott Weil); 12: Phosphoric Acid, an Electrolyte for Fuel Cells - Temperature and Composition Dependence of Vapor Pressure and Proton Conductivity (Carsten Korte); 13: Materials and Coatings for Metallic Bipolar Plates in Polymer Electrolyte Membrane Fuel Cells (Heli Wang and John A. Turner); 14: Nanostructured Materials for Fuel Cells (John F. Elter); 15: Catalysis in Low-Temperature Fuel Cells - An Overview (Sabine Schimpf and Michael Bron). PART III: Analytics and Diagnostics. Chapter 16: Impedance Spectroscopy for High-Temperature Fuel Cells (Ellen Ivers-Tiffee, Andre Leonide, Helge Schichlein, Volker Sonn and Andre Weber); 17: Post-Test Characterization of Solid Oxide Fuel-Cell Stacks (Norbert H. Menzler and Peter Batfalsky); 18: In Situ Imaging at Large-Scale Facilities (Christian Toetzke, Ingo Manke and Werner Lehnert); 19: Analytics of Physical Properties of Low

Study on partitioning and transmutation (P and T) of high-level waste. Status of R and D. Final report; Studie zur Partitionierung und Transmutation (P and T) hochradioaktiver Abfaelle. Stand der Grundlagen- und technologischen Forschung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Merk, Bruno; Glivici-Cotruta, Varvara

2014-07-01

The main project, where this sub project contributed to, has been structured into two modules: module A (funded by the federal ministry of economics, managed by KIT) and module B (funded by the federal ministry of education and research, managed by acatech). Partners in module A were DBE TECHNOLOGY GmbH, the Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), the Karlsruher Institute of Technology (KIT) and the Rheinisch-Westfaelische Technische Hochschule (RWTH) Aachen, in co-operation with the Forschungszentrum Juelich (FZJ). Modul B has been executed by the Zentrum fuer Interdisziplinaere Risiko- und Innovationsforschung der Universitaet Stuttgart (ZIRIUS). The overall coordination has been carried out by the Deutsche Akademie der Technikwissenschaften (acatech). The social implications have been evaluated in module B based on the analysis of the scientific and technological aspects in module A. Recommendations for communication and actions to be taken for the future positioning of P and T have been developed. In the project part, coordinated by HZDR - status of R and D - an overview on the whole topic P and T is given. The topic is opened by a short description of reactor systems possible for transmutation. In the following the R and D status of separation technologies, safety technology, accelerator technology, liquid metal technology, spallation target development, transmutation fuel and structural material development, as well as waste conditioning is described. The topic is completed by the specifics of transmutation systems, the basic physics and core designs, the reactor physics, the simulation tools and the development of Safety Approaches. Additionally, the status of existing irradiation facilities with fast neutron spectrum is described. Based on the current R and D status, the research and technology gaps in the topics: separation and conditioning, accelerator and spallation target, and reactor

Study on partitioning and transmutation (P and T) of high-level waste. Status of R and D. Final report

International Nuclear Information System (INIS)

Merk, Bruno; Glivici-Cotruta, Varvara

2014-01-01

The main project, where this sub project contributed to, has been structured into two modules: module A (funded by the federal ministry of economics, managed by KIT) and module B (funded by the federal ministry of education and research, managed by acatech). Partners in module A were DBE TECHNOLOGY GmbH, the Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), the Karlsruher Institute of Technology (KIT) and the Rheinisch-Westfaelische Technische Hochschule (RWTH) Aachen, in co-operation with the Forschungszentrum Juelich (FZJ). Modul B has been executed by the Zentrum fuer Interdisziplinaere Risiko- und Innovationsforschung der Universitaet Stuttgart (ZIRIUS). The overall coordination has been carried out by the Deutsche Akademie der Technikwissenschaften (acatech). The social implications have been evaluated in module B based on the analysis of the scientific and technological aspects in module A. Recommendations for communication and actions to be taken for the future positioning of P and T have been developed. In the project part, coordinated by HZDR - status of R and D - an overview on the whole topic P and T is given. The topic is opened by a short description of reactor systems possible for transmutation. In the following the R and D status of separation technologies, safety technology, accelerator technology, liquid metal technology, spallation target development, transmutation fuel and structural material development, as well as waste conditioning is described. The topic is completed by the specifics of transmutation systems, the basic physics and core designs, the reactor physics, the simulation tools and the development of Safety Approaches. Additionally, the status of existing irradiation facilities with fast neutron spectrum is described. Based on the current R and D status, the research and technology gaps in the topics: separation and conditioning, accelerator and spallation target, and reactor

Nuclear safety research in HGF 2012; Fortschrittsbericht 2012. Programm 'Nukleare Sicherheitsforschung' Helmholtz-Gemeinschaft

Energy Technology Data Exchange (ETDEWEB)

Anon.

2013-06-15

in the Nuclear Competence Association. The Forschungszentrum Juelich GmbH, HZDR Helmholtz-Zentrum Dresden-Rossendorf and the KIT Karlsruhe Institute of Technology are involved in the Nuclear Safety Research Program within the Helmholtz Association. The work and results in 2012 are presented. (orig.)

The text of the agreement of 22 July 1977 between Argentina and the Agency for the application of safeguards in connection with a contract concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reactor Brennelement Union GmbH Hanau (Federal Republic of Germany) for co-operation in the field of fabrication of fuel elements for peaceful nuclear activities

International Nuclear Information System (INIS)

1995-01-01

The Agreement between the Republic of Argentina, the Federative Republic of Brazil, the Brazilian-Argentine Agency for Accounting and Control of Nuclear Materials and the International Atomic Energy Agency for the Application of Safeguards came into force on 4 March 1994. As a result of the coming into force of the aforesaid Agreement for Argentina, the application of safeguards under the Agreement of 22 July 1977 between Argentina and the IAEA for the application of safeguards in connection with a contract concluded between the Comision Nacional de Energia Atomica (Argentina) and the Reactor Brennelement Union GmbH Hanau (Federal Republic of Germany) for co-operation in the field of fabrication of fuel elements for peaceful nuclear activities has been suspended

Forschungszentrum Karlsruhe Technik und Umwelt. Program budget for research and development 2001. Planning period 2001 - 2004

International Nuclear Information System (INIS)

2000-11-01

The Karlsruhe Research Center is a national research center founded and substantially funded by the German Federal Government and the Land government of Baden-Wuerttemberg, the federal state where it is located. It is a member of the Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren and is one of the most important, independent research centers in Germany working in the fields of the natural sciences and engineering sciences. The Center's R and D programmes encompass research activities up to pre-industrial scale as well as product and process development, research for precautionary policy and purposes, and fundamental research. The focal points of the R and D programme 2001 are explained under the following subject titles: - Environment - Public Health - Energy - Key Technologies - Fundamental Research. The programme reveals the shift of emphasis of activities which commenced in the early 1980s, away from nuclear engineering as the major focus in the early days towards a much wider spectrum of activities today, characterized by aspects such as complexity of tasks, long-term planning, and the need for cross-disciplinary and multilateral cooperation. The second volume of the publication explains the programme budget and apportionment of funds. (orig./CB) [de

78 FR 1733 - Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines

Science.gov (United States)

2013-01-09

... (FADEC) software version 2.91. This new AD requires removing all software mapping versions prior to 292... Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England Executive Park... proposed to require removing all software mapping versions prior to 292, 301, or 302, applicable to the TAE...

Cooperation agreement between the Technical University Dresden and AREVA NP GmbH

International Nuclear Information System (INIS)

Hurtado, A.; Hansen, V.; Druschel, R.; Heyer, J.

2008-01-01

As a result of the complete refurbishment of the Technical University Dresden (TUD) training reactor AKR and its equipment with the digital safety system TELEPERM XS by AREVA NP it is actually the most advanced facility in this category in Germany. Following the positive experience gained during project execution an agreement between AREVA NP and TUD was signed to bundle each organizations competence's in the interest of new recruits in the field of nuclear technology in 2006. The content and the experience with the cooperation are described in this paper. Conclusions show that both parties found an attractive way to support fellow young nuclear engineers. (authors)

The Department of Chemistry of the Oesterreichische Studiengesellschaft fuer Atomenergie GmbH

International Nuclear Information System (INIS)

Proksch, E.

1978-01-01

The research and development work carried out is described. It is highly practice-oriented and a large fraction of the capacity available is devoted to projects sponsored by or carried out in collaboration with industry. The main R and D areas are high-temperature gas-cooled reactor fuel, conditioning of radioactive wastes, radiation processing, and production of radioisotopes and labeled compounds

78 FR 30791 - Airworthiness Directives; Alexander Schleicher GmbH & Co. Segelflugzeugbau Sailplanes

Science.gov (United States)

2013-05-23

... the availability of this material at the FAA, call (816) 329-4148. Examining the AD Docket You may... verbal contact we receive about this proposed AD. Discussion On March 5, 1964, we issued AD 64-07-05... referenced above contains German to English translation. On the document we received it cites the use of ``TM...

78 FR 53630 - Airworthiness Directives; Alexander Schleicher GmbH & Co. Segelflugzeugbau Sailplanes

Science.gov (United States)

2013-08-30

..., Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816...; email: [email protected] . SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed... rod for conformity following Alexander Schleicher Automatischer H[ouml]henruderanschlu[beta] (English...

77 FR 55105 - Airbus Operations GmbH Grant of Exemption No. 10611

Science.gov (United States)

2012-09-07

... 44 U.S.C. 1510. #0; #0;The Code of Federal Regulations is sold by the Superintendent of Documents. #0... use Exemption No. 10611. Issued in Washington, DC, on September 4, 2012. Lirio Liu, Acting Director...

Department of Material Studies - Overview

International Nuclear Information System (INIS)

Werner, Z.

2007-01-01

The technology of modifying surfaces of practical-use materials by means of continuous and pulsed energy and particle beams has been intensely studied for more than 20 years. In some fields it is presently utilized on a wide scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used in this area. The research carried by Department P-IX is centered around the use of two own ion implantation machines (ion implanters) of different kind and several world-wide unique sources of high-intensity intense plasma pulses, utilized jointly with Department P-V. The Department cooperates closely with Forschungszentrum Rossendorf (FZR, Dresden, Germany) in the field of ion-beam-based analytical techniques and the use of unique ion implantation facilities. The main objectives of the Department are: search for new ways of modifying surface properties of solid materials by means of continuous or pulsed ion and plasma beams and implementation of ion implantation technique in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2006 these objectives were accomplished in many ways, particularly by research on: formation of superconducting MgB 2 phases, electrical conductivity in metallic nano-layers produced in oxide insulators (Al 2 O 3 ) by ion implantation, ion implantation as a method of improving mechanical properties of stainless steels without degrading their corrosion resistance, ion implantation/plasma treatment of ceramics aimed at improving their wettability in ceramic-metal joints, methods of controlling wear of ceramic-polymer pairs used in bio-medical applications. The research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), and Institute of Molecular Physics Polish Academy of Sciences (Poznan

Institute for Nuclear Waste Disposal. Annual Report 2009

International Nuclear Information System (INIS)

Geckeis, H.; Stumpf, T.

2010-01-01

On October 01, 2009, the Karlsruhe Institute of Technology (KIT) was founded by a merger of Forschungszentrum Karlsruhe and Universitaet Karlsruhe (TH). KIT bundles the missions of both precursory institutions: a university of the state of Baden- Wuerttemberg with teaching and research tasks and a large-scale research institution of the Helmholtz Association conducting program-oriented provident research on behalf of the Federal Republic of Germany. Within these missions, KIT is operating along the three strategic fields of action, research, teaching, and innovation. With about 8000 employees and an annual budget of about EUR 700 million, KIT is one of the largest research and teaching institutions worldwide. It has the potential to assume a top position worldwide in selected fields of research. The objective: KIT will become an institution of excellent research and scientific education, as well as a prominent location of academic life, life-long learning, comprehensive advanced training, unrestricted exchange of know-how and sustainable innovation culture. The largest organizational units of KIT are the KIT Centers. They focus on problems of fundamental importance to the existence and further development of our society or on key issues of basic science. KIT Centers are characterized by the uniqueness of their scientific approach, their strategic objective and mission and by a long-term perspective. The Institut fuer Nukleare Entsorgung, INE, (Institute for Nuclear Waste Disposal) belongs to the KIT Energy Center. The KIT Energy Center comprises some 40 institutes of the Universitaet Karlsruhe (TH) and 18 large institutes of the Forschungszentrum Karlsruhe with, at present, a total of approx. 1100 staff members. The participating institutes and research groups are the operating research units. An interdisciplinary KIT School of Energy establishes ideal framework conditions for teaching. For external partners from industry, the KIT Center develops solutions in

Department of Nuclear Reactions - Overview

International Nuclear Information System (INIS)

Nowicki, L.

2006-01-01

In 2005 the Department held a steady course. Topics of nuclear physics, atomic physics and materials research that started in previous years were continued. Although our team was smaller than years ago, the scientific activity, estimated by number of published papers is still very high. Scientists of the Department are co-authors or authors of more than 50 papers. Nuclear physics, which is our main-stream activity, covered a wide energy range. It started close to the Coulomb barrier, where 6 He breakup on heavy nuclei were studied, and ended at zones of tens of GeV; such high energies were used to investigate spin structure of deuterons and to explore hadron leptoproduction. Traditionally, experimental investigations in the fields of atomic physics and of physics of materials completed the scene. Our old Van de Graaff accelerator Lech was used for studies of M-shell ionisation of heavy elements, for hardening of Ultra-High Molecular Weight Polyethylene and for characterisation of materials with RBS and NRA techniques. The VdG runs perfectly although it is over 40 years old. Two Ph.D. students finished their theses and were promoted. Izabela Fijal's work concerned multi-ionization and intrashell coupling effects for L-shell x-ray emission induced by heavy ions, while Sergiy Mezhevych showed studies on scattering of 11 B from carbon isotopes. It is obvious that contemporary works on physics do not arise in a single lab. Our contributions to many papers were possible due owing to collaborations involving many institutions. Some of them are listed: GSI, Darmstadt (PANDA Collaboration) DESY, Hamburg (HERMES Collaboration) Institut fuer Kernphysik, Forschungszentrum Juelich Forschungszentrum Rossendorf CSNSM, Orsay GANIL, Caen University of Huelva Institute of Nuclear Research, Kiev SLCJ, Warsaw ITME, Warsaw Some of our colleagues traditionally gave lectures and made physical demonstrations on Warsaw informal learning events: 9 th Science Picnic and 9 th Science Festival

Department of Material Studies: Overview

International Nuclear Information System (INIS)

Werner, Z.

2003-01-01

Full text: The technology of modifying surfaces of industrial-use materials by means of continuous and pulsed energy beams has been intensely studied for more than 20 years. In some fields it is presently utilized on a broad scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used. Department P-IX (jointly with Department P-V) utilizes some globally unique sources of intense plasma pulses, and jointly with Forschungszentrum Rossendorf (FZR, Dresden, Germany) conducts research on the application of continuous ion beams using FZR and IPJ facilities. The main objectives of the Department are: - a search for new ways of modifying surface properties of solid materials by means of pulsed plasma beams; - the implementation of ion implantation technique in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2002 these objectives were accomplished in many ways, particularly by research on phase changes in steel irradiated with intense pulsed plasma beams, Si-implanted TiN coatings on steel, implantation of high doses of nitrogen into aluminum, and corrosion properties of Ti surfaces alloyed with Pd by implantation and/or plasma pulses. The research was aimed at practical objectives like finding novel hard coatings, improving resistance to high temperature oxidation, reducing friction between NC6 steel-made parts without using a lubricating agent etc. The research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), Forschungszentrum Rossendorf FZR (Dresden, Germany), as well as with some industrial companies. Some research in 2002 was aimed at improving of the rod plasma injector generator used in our lab (the mechanism of electrode erosion during the plasma discharge, ablation of substrate material induced

Consequences arising for research reactor operation from the planned amendment of the German atomic energy act (AtG) and atomic energy policy. Germany soon to be a third-world country in nuclear research?

International Nuclear Information System (INIS)

Krull, W.

1999-01-01

In the opinion of Dr. Wilfried Krull from Geesthacht, the Chairman of the German Research Reactor Trades Union, there is a great danger of the Federal Republic of Germany falling to the level of a third-world country as far as nuclear research is concerned. He says that it is a matter of urgency for binding exceptions from the general restrictions applicable to nuclear power stations to be incorporated into the opt-out amendment to nuclear law tabled by Juergen Trittin, the Minister for Environmental Affairs. He says that prohibition of reprocessing of spent fuel elements constitutes a violation of the surrender treaties concluded with the USA as part of non-proliferation. Furthermore, he states that a ban on reprocessing of spent nuclear fuel from research and training reactors is counterproductive. He says that there would be a particular danger if the limitation of research reactors to a rating of one megawatt, which Trittin has in the first instance planned in an initial draft law, were to be implemented in the form of a regulation. At that point, he claims, Germany would, as far as nuclear medicine (including cancer therapy) and modern technical inspection procedures (non-destructive, of materials) are concerned, become an importing country. (orig.) [de

Nanotomography endstation at the P05 beamline: Status and perspectives

Science.gov (United States)

Greving, I.; Ogurreck, M.; Marschall, F.; Last, A.; Wilde, F.; Dose, T.; Burmester, H.; Lottermoser, L.; Müller, M.; David, C.; Beckmann, F.

2017-06-01

The Imaging Beamline IBL/P05 at the DESY storage ring PETRA III, operated by the Helmholtz-Zentrum Geesthacht, has two dedicated endstations optimized for micro- and nanotomography experiments [1-3]. Here we present the status of the nanotomography endstation, highlight the latest instrumentation upgrades and present first experimental results. In particular in materials science, where structures with ceramics or metallic materials are of interest, X-ray energies of 15 keV and above are required even for sample sizes of several 10 μm in diameter. The P05 imaging beamline is dedicated to materials science and is designed to allow for imaging applications with X-ray energies of 10 to 50 keV. In addition to the full field X-ray microscopy setup, the layout of the nanotomography endstation allows switching to cone-beam configuration. Kinematics for X-ray optics like compound refractive lenses (CRLs), Fresnel zone plates (FZP) or beam-shaping optics are implemented and the installation of a Kirkpatrick Baez-mirror (KB mirror) system is foreseen at a later stage of the beamline development. Altogether this leads to a high flexibility of the nanotomography setup such that the instrument can be tailored to the specific experimental requirements of a range of sample systems.

Determination of appropriate models and parameters for premixing calculations

Energy Technology Data Exchange (ETDEWEB)

Park, Ik-Kyu; Kim, Jong-Hwan; Min, Beong-Tae; Hong, Seong-Wan

2008-03-15

The purpose of the present work is to use experiments that have been performed at Forschungszentrum Karlsruhe during about the last ten years for determining the most appropriate models and parameters for premixing calculations. The results of a QUEOS experiment are used to fix the parameters concerning heat transfer. The QUEOS experiments are especially suited for this purpose as they have been performed with small hot solid spheres. Therefore the area of heat exchange is known. With the heat transfer parameters fixed in this way, a PREMIX experiment is recalculated. These experiments have been performed with molten alumina (Al{sub 2}O{sub 3}) as a simulant of corium. Its initial temperature is 2600 K. With these experiments the models and parameters for jet and drop break-up are tested.

Structural materials for innovative nuclear systems (SMINS)

International Nuclear Information System (INIS)

2008-01-01

Structural materials research is a field of growing relevance in the nuclear sector, especially for the different innovative reactor systems being developed within the Generation IV International Forum (GIF), for critical and subcritical transmutation systems, and of interest to the Global Nuclear Energy Partnership (GNEP). Under the auspices of the NEA Nuclear Science Committee (NSC) the Workshop on Structural Materials for Innovative Nuclear Systems (SMINS) was organised in collaboration with the Forschungszentrum Karlsruhe in Germany. The objectives of the workshop were to exchange information on structural materials research issues and to discuss ongoing programmes, both experimental and in the field of advanced modelling. These proceedings include the papers and the poster session materials presented at the workshop, representing the international state of the art in this domain. (author)

VESPA. Behaviour of long-lived fission and activation products in the nearfield of a nuclear waste repository and the possibilities of their retention

Energy Technology Data Exchange (ETDEWEB)

Bischofer, Barbara; Hagemann, Sven [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Koeln (Germany); Altmaier, Marcus [Karlsruher Institut fuer Technologie (KIT) (Germany); and others

2016-06-15

The present document is the final report of the Joint Research Project VESPA (Behaviour of Long-lived Fission and Activation Products in the Near Field of a Nuclear Waste Repository and the Possibilities of Their Retention), started in July 2010 with a duration of four years. The following four institutions were collaborative Partners in VESPA: - Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH - Institut fuer Energie- und Klimaforschung, IEK-6: Nukleare Entsorgung und Reaktorsicherheit, Forschungszentrum Juelich (FZJ) - Institut fuer Ressourcenoekologie (IRE), Helmholtz-Zentrum Dresden-Rossendorf (HZDR) - Institut fuer Nukleare Entsorgung (INE), Karlsruher Institut fuer Technologie (KIT) VESPA was funded by the German Federal Ministry of Economics and Energy (BMWi) under the contract numbers 02 E 10770 (GRS), 02 E 10780 (FZJ-IEF-6), 02 E 10790 (HZDR-IRE), 02 E 10800 (KIT-INE).

Determination of appropriate models and parameters for premixing calculations

International Nuclear Information System (INIS)

Park, Ik-Kyu; Kim, Jong-Hwan; Min, Beong-Tae; Hong, Seong-Wan

2008-03-01

The purpose of the present work is to use experiments that have been performed at Forschungszentrum Karlsruhe during about the last ten years for determining the most appropriate models and parameters for premixing calculations. The results of a QUEOS experiment are used to fix the parameters concerning heat transfer. The QUEOS experiments are especially suited for this purpose as they have been performed with small hot solid spheres. Therefore the area of heat exchange is known. With the heat transfer parameters fixed in this way, a PREMIX experiment is recalculated. These experiments have been performed with molten alumina (Al 2 O 3 ) as a simulant of corium. Its initial temperature is 2600 K. With these experiments the models and parameters for jet and drop break-up are tested

Helmholtz-Zentrum Dresden-Rossendorf, Institute of Safety Research. Annual report 2010

International Nuclear Information System (INIS)

Gerbeth, Gunter; Schaefer, Frank

2011-01-01

The Institute of Safety Research (ISR) was over the past 20 years one of the six Research Institutes of Forschungszentrum Dresden-Rossendorf e.V. (FZD), which in 2010 belonged to the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz. Together with the Institutes of Radiochemistry and Radiation Physics, ISR implements the research programme ''Nuclear Safety Research'' (NSR), which was during last years one of the three scientific programmes of FZD. NSR involves two main topics, i.e. ''Safety Research for Radioactive Waste Disposal'' and ''Safety Research for Nuclear Reactors''. The research of ISR aims at assessing and enhancing the safety of current and future reactors, the development of advanced simulation tools including their validation against experimental data, and the development of the appropriate measuring techniques for multi-phase flows and liquid metals.

IAEA consultants' meeting on selection of basic evaluations for the FENDL-2 library. Summary report

International Nuclear Information System (INIS)

Pashchenko, A.B.

1996-09-01

FENDL-1 is the international reference nuclear data library for fusion design applications, available from the IAEA Nuclear Data Section. FENDL/E is the sublibrary for evaluated neutron reaction data. An updated version, FENDL-2, is being developed. The present report contains the Summary of the IAEA Consultants' Meeting on ''Selection of Basic Evaluations for the FENDL-2 Library'', held at Karlsruhe, Germany, from 24 to 28 June 1996. This meeting was organized by the IAEA Nuclear Data Section (NDS) with the co-operation and assistance of local organizers of the Forschungszentrum Karlsruhe, Germany. Summarized are the conclusions and recommendations for the selection of basic evaluations from candidates submitted by five national projects (JENDL-FF, BROND, EFF, ENDF/B-VI and CENDL) for FENDL/E-2.0 international reference data library. (author). 1 tab

Measurement of the thermal conductivity and heat transfer coefficient of a binary bed of beryllium pebbles

Energy Technology Data Exchange (ETDEWEB)

Donne, M.D.; Piazza, G. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reaktortechnik; Goraieb, A.; Sordon, G.

1998-01-01

The four ITER partners propose to use binary beryllium pebble bed as neutron multiplier. Recently this solution has been adopted for the ITER blanket as well. In order to study the heat transfer in the blanket the effective thermal conductivity and the wall heat transfer coefficient of the bed have to be known. Therefore at Forschungszentrum Karlsruhe heat transfer experiments have been performed with a binary bed of beryllium pebbles and the results have been correlated expressing thermal conductivity and wall heat transfer coefficients as a function of temperature in the bed and of the difference between the thermal expansion of the bed and of that of the confinement walls. The comparison of the obtained correlations with the data available from the literature show a quite good agreement. (author)

Economic efficiency simulation for optimized management of pressure electrolysers in hybrid power plant systems. Prognosis and hydrogen production; Wirtschaftlichkeitssimulation zur optimierten Betriebsfuehrung von Druckelektrolyseuren in hybriden Kraftwerksystemen. Prognose und Wasserstoffproduktion

Energy Technology Data Exchange (ETDEWEB)

Krueger, P.; Ziems, C.; Tannert, D.; Voigt, A.; Fischer, U.; Krautz, H.J. [Brandenburgische Technische Univ. Cottbus-Senftenberg, Cottbus (Germany)

2014-07-01

As part of the research at the H{sub 2} Research Centre of BTU Cottbus-Senftenberg feasibility studies are carried out on the use of electrolysis technology in conjunction with fluctuating wind power fed to a pressure electrolysis apparatus. The aim of the analysis is an economically optimized operating strategy of the system consisting of wind farm, alkaline pressure electrolyser, hydrogen storage and reconversion. For this purpose, an energy economics tool was created. [German] Im Rahmen der Forschungsarbeiten am H{sub 2}-Forschungszentrum der BTU Cottbus-Senftenberg werden an einer Druckelektrolyseanlage Wirtschaftlichkeitsbetrachtungen zum Einsatz der Elektrolysetechnik in Verbindung mit fluktuierender Windenergieeinspeisung durchgefuehrt. Ziel der Analysen ist eine wirtschaftlich optimierte Betriebsstrategie des Systems, bestehend aus Windpark, alkalischem druckaufgeladenem Elektrolyseur, Wasserstoff-Speicher und Rueckverstromung. Hierzu wurde ein Wirtschaftlichkeits-Tool erstellt.

The multipurpose thermalhydraulic test facility TOPFLOW: an overview on experimental capabilities, instrumentation and results

International Nuclear Information System (INIS)

Prasser, H.M.; Beyer, M.; Carl, H.; Manera, A.; Pietruske, H.; Schuetz, P.; Weiss, F.P.

2006-01-01

A new multipurpose thermalhydraulic test facility TOPFLOW (TwO Phase FLOW) was built and put into operation at Forschungszentrum Rossendorf in 2002 and 2003. Since then, it has been mainly used for the investigation of generic and applied steady state and transient two phase flow phenomena and the development and validation of models of computational fluid dynamic (CFD) codes in the frame of the German CFD initiative. The advantage of TOPFLOW consists in the combination of a large scale of the test channels with a wide operational range both of the flow velocities as well as of the system pressures and temperatures plus finally the availability of a special instrumentation that is capable in high spatial and temporal resolving two phase flow phenomena, for example the wire-mesh sensors. (orig.)

Concept for calculating dose rates from activated groundwater at accelerator sites

CERN Document Server

Prolingheuer, N; Vanderborght, J; Schlögl, B; Nabbi, R; Moormann, R

Licensing of particle accelerators requires the proof that the groundwater outside of the site will not be significantly contaminated by activation products formed below accelerator and target. In order to reduce the effort for this proof, a site independent simplified but conservative method is under development. The conventional approach for calculation of activation of soil and groundwater is shortly described on example of a site close to Forschungszentrum Juelich, Germany. Additionally an updated overview of a data library for partition coefficients for relevant nuclides transported in the aquifer at the site is presented. The approximate model for transport of nuclides with ground water including exemplary results on nuclide concentrations outside of the site boundary and of resulting effective doses is described. Further applications and developments are finally outlined.

Receiver system for radio observation of high-energy cosmic ray air showers and its behaviour in self trigger mode

International Nuclear Information System (INIS)

Kroemer, Oliver

2008-04-01

on the site of the cosmic ray air shower experiment KASCADE-Grande at the Forschungszentrum Karlsruhe. They are receiving radio signals which are clearly in coincidence with cosmic ray air showers. Due to the calibration spanning the whole signal path and the polarization analysis it is possible to investigate radio emission from cosmic ray air showers and underlying emission models. An autonomous operation of the receiver stations requires a self trigger which identifies the cosmic ray air shower by its own radio signal only. Due to the superposition of noise and radio frequency interference an increasing false trigger rate is expected with decreasing trigger threshold. The self trigger conceived within this work allows suitably low thresholds at technically manageable false trigger rates. The behaviour and limitations of this self trigger concept are derived theoretically but also confirmed by measurements under real environmental conditions. On the radio-loud site of the Forschungszentrum Karlsruhe, the electric field strength threshold is only a factor of 3 above the theoretical minimum which is given by the omnipresent galactic noise in an unpopulated environment. The resulting detection limits for cosmic rays are expected to be above 5.10 17 eV for the primary particle energies in an unpopulated environment and above 10 18 eV on the site of the Forschungszentrum Karlsruhe. (orig.)

29 March 2012 - Austrian Niederösterreich Governor E. Pröll with Klubobmann and Chairman of EBG MedAustron GmbH Council K. Schneeberger, Director General for Cultural Policy Amabssador M.Eichtinger and Permanent Representative of Austria to the UNO and Austrian Delegate to CERN Council Ambassador C. Strohal in the MedAustron facility at CERN building 184.

CERN Multimedia

Jean-Claude Gadmer

2012-01-01

CERN-HI-1203078 01 - 13: visit of LINAC 3 with M. Benedikt CERN-HI-1203078 14 - 20: in the Roy Billinge room CERN-HI-1203078 21- 22: visit of the LEIR accelerator in building 354 CERN-HI-1203078 23 - 55: signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss CERN-HI-1203078 56 - 99: in building 184, Governor Pröll and CERN Director-General R. Heuer switch on the MedAustron ion source to produce the proton beam; visit MedAustron facility. CERN-HI-1203078 32:from left to right: Klubobmann and Chairman of EBG MedAustron GmbH Council K. Schneeberger; Director-General R. Heuer;Niederösterreich Governor E. Pröll;Head of International Relations F. Pauss;Permanent Representative of Austria to the UNO and Austrian Delegate to CERN Council Ambassador C. Strohal.

Modern control systems in the combined-cycle power plant `Salinenstrasse` of Stadtwerke Schwaebisch Hall GmbH; Einsatz moderner Kraftwerksleittechnik im GuD-Kraftwerk Salinenstrasse der Stadtwerke Schwaebisch Hall GmbH

Energy Technology Data Exchange (ETDEWEB)

Breuning, P [Stadtwerke Schwaebisch Hall GmbH (Germany); Menschel, M [Stadtwerke Schwaebisch Hall GmbH (Germany); Friedrich, G [IDS Gesellschaft fuer Informations-, Datenuebertragungs- und Steuerungssysteme mbH, Karlsruhe (Germany); Radtke, W [IDS Gesellschaft fuer Informations-, Datenuebertragungs- und Steuerungssysteme mbH, Karlsruhe (Germany)

1994-11-14

Run-of-river power plants, CHP systems and heating power stations produce much of the heat and power consumed in the supply area of the Stadtwerke Schwaebisch Hall. The most recent component is a modern combined-cycle power station based on a reconstructed steam power plant commissioned in 1935. Modern control systems supplied by IDS Karlsruhe ensure optimal grid and power plant operation. (orig.) [Deutsch] Laufwasser-Kraftwerke, BHKW und Heizkraftwerke decken einen grossen Teil des Bedarfs an Waerme und Energie im Versorgungsgebiet der Stadtwerke Schwaebisch Hall. Vor kurzem ist hier als weitere Komponente ein modernes GuD-Kraftwerk in Betrieb genommen worden. Um ein bestehendes, bereits 1935 erbautes Dampfkraftwerk wirtschaftlicher nutzen zu koennen, haben die Stadtwerke Schwaebisch Hall den Umbau zum GuD-Kraftwerk vorgenommen. Durch den Einsatz der von IDS Karlsruhe gelieferten Kraftwerksleittechnik, verbunden mit einem modernen Netzleitsystem wird eine optimale Netz- und Kraftwerksfuehrung ermoeglicht. (orig.)

Radiation Safety Report 2003, Forschungszentrum Rossendorf e.V. and Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V

International Nuclear Information System (INIS)

Sahre, P.

2004-03-01

The annual report contains information and measured data obtained with the routine monitoring and measuring activities performed in 2003 at the VKTA and the nuclear research center, FZR, referring to health physics measurements and individual dosimetry of internal and external personnel, and ambient radioactivity monitoring in the area of the two facilities [de

Steam chugging in a boiling water reactor pressure-suppression system

International Nuclear Information System (INIS)

Pitts, J.H.

1980-01-01

Results of a transient analysis predicting the general characteristics of steam chugging compare well with the results of two large scale experiments: GKM II, test 21 and GKSS, test 16. Predicted fundamental periods of chugging are within 5 and 16 per cent of the respective experimental values. The results of the analysis include effects of air in the drywell, momentum loss and heat transfer in the condensation pipe, direct contact condensation heat transfer at the gas-water interface and momentum and heat transfer in the wetwell water pool. Bubble shape is calculated in two-dimensional cylindrical coordinates. Required inputs to the analysis include the geometry, initial conditions and constants to determine both the steam inlet mass flowrate to the drywell as a function of time and conduction heat transfer through the wall of the condensation pipe. There are no arbitrary free parameters which must be specified to predict specific experiments. Rather, the analysis is based on fundamental physical phenomena, experimental coefficients documented for general heat transfer and fluid mechanics characteristics and standard analytical techniques. The random nature of steam chugging observed in some experiments is partially explained by predicted regimes of chugging and changes in the maximum extent of a bubble below the condensation pipe exit during each regime. (orig.)

New cooling system of the FRG-1 two barrier system of the primary coolant cycle

International Nuclear Information System (INIS)

Knop, W.; Schreiner, P.

2003-01-01

The GKSS research center operates the swimming pool reactor FRG-1 with a thermal power of 5 MW as national neutron source for neutron scattering experiments and sample irradiation as well. Before changing the primary coolant cycle consisted of the reactor core and the closed piping including pumps, heat exchanger and delay tank. The closed cooling circuit was located underneath the reactor pool, in the so-called radioactive cellar. This piping system served secondary coolant system. Due to the location of the primary coolant cycle below the operation pool a postulated 2-F line break and simultaneous failure of the pool slide gate valve could lead to a falling dry of the total reactor core. the new primary coolant system was built in the beginning 2002 in a partitioned cell all within the radioactive cellar, so that the reactor core remains with water with the assumed incident. Due to the new two barrier-inclusion of the primary circuit only the melting of two fuel plates (from total 252 fuel plates) has to be taken into account. This measure and the core compactness in 2000 with a neutron flux gain of a factor of 2 makes the FRG-1 ready for the next 15 years of reactor operation. (author)

Papers about coated particles, graphitic and metallic materials for progressive high-temperature reactors at the Reactor Meeting 1978

International Nuclear Information System (INIS)

Rottmann, J.

1978-09-01

In the contributions, questions on the development, the radiation and the high-temperature behaviour and the characterization of fuel element particles are treated. Furthermore the resistance and radiation behaviour of graphitic materials are discussed. Finally, questions on the choice of high-temperature alloys for nuclear process heat facilities are discussed and the testing-equipment of the Nuclear Research Centre as well as first results of the long-time experiments are presented. The work was performed within the frame of the projects 'HTR-Fuel Element Cycle' and 'Prototype Nuclear Process Heat', which are sponsored by the Federal Ministry of Research and Technology of the Federal Republic of Germany and of the state of North-Rhine-Westfalia. Partner firms, who participate in the two projects are Gelsenberg AG, Gesellschaft fuer Hochtemperaturreaktor-Technik mbH, Hochtemperaturreaktor-Brennelement GmbH, Hochtemperatur-Reaktorbau GmbH, Kernforschungsanlage Juelich GmbH, NUKEM GmbH, SIGRI Elektrographit GmbH/Ringsdorff-Werke GmbH, Bergbauforschung GmbH und Rheinische Braunkohlenwerke AG. (orig./UA) [de

Helmholtz-Zentrum Dresden-Rossendorf, Institute of Safety Research. Annual report 2010

Energy Technology Data Exchange (ETDEWEB)

Gerbeth, Gunter; Schaefer, Frank (eds.)

2011-07-01

The Institute of Safety Research (ISR) was over the past 20 years one of the six Research Institutes of Forschungszentrum Dresden-Rossendorf e.V. (FZD), which in 2010 belonged to the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz. Together with the Institutes of Radiochemistry and Radiation Physics, ISR implements the research programme ''Nuclear Safety Research'' (NSR), which was during last years one of the three scientific programmes of FZD. NSR involves two main topics, i.e. ''Safety Research for Radioactive Waste Disposal'' and ''Safety Research for Nuclear Reactors''. The research of ISR aims at assessing and enhancing the safety of current and future reactors, the development of advanced simulation tools including their validation against experimental data, and the development of the appropriate measuring techniques for multi-phase flows and liquid metals.

Determination of neutron spectra formed by 40-MeV deuteron bombardment of a lithium target with multi-foil activation technique

CERN Document Server

Maekawa, F; Wada, M; Wilson, P P H; Ikeda, Y

2000-01-01

Neutron flux spectra at an irradiation field produced by a 40-MeV deuteron bombardment on a thick lithium-target at Forschungszentrum Karlsruhe, Germany, have been determined by the multi-foil activation technique. Twenty-seven dosimetry reactions having a wide energy range of threshold energies up to 38 MeV were employed as detectors for the neutron flux spectra extending to 55 MeV. The spectra were adjusted with the SAND-II code with the experimental reaction rates based on an iterative method. The adjusted spectra validated quantitatively the Monte Carlo deuteron-lithium (d-Li) neutron source model code (M sup C DeLi) which was used to calculate initial guess spectra and also has been used for IFMIF nuclear designs. Accuracy of the adjusted spectra was approx 10% that was suitable for successive integral tests of activation cross section data.

Progress of the 10 MW ECRH System for W7-X

International Nuclear Information System (INIS)

Michel, G.; Brand, P.; Dammertz, G.

2003-01-01

The electron cyclotron resonance heating system for the W7-X stellarator is a joint effort of the Max-Planck-Institut fuer Plasmaphysik in Greifswald, the Institut fuer Plasmaforschung Stuttgart and the Forschungszentrum Karlsruhe under the supervision of the latter. Currently it is being constructed at the Greifswald branch of IPP. It will consist of 10 gyrotrons (each with 1 MW 140 GHz in the CW regime) and a quasi optical multi-beam transmission line. W7-X gyrotron candidates are being developed separately in Western Europe and the USA. The prototype phase of the gyrotrons is almost over and significant results have been achieved. The manufacturing of the transmission line is ongoing. An overview over the system including data acquisition and control issues will be given and the current status of the construction will be presented. (authors)

Von schnellen Teilchen und hellem Licht 50 Jahre Deutsches Elektronen-Synchrotron DESY

CERN Document Server

Lohrmann, Erich

2009-01-01

Das 1959 in Hamburg als Zentrum für Elementarteilchenforschung gegründete "Deutsche Elektronen-Synchrotron DESY" gelangte durch Pionierleistungen in der Entwicklung von Hochenergie-Beschleunigern und Speicherringen zu weltweiter Anerkennung. Seiner internationalen Nutzergemeinde sind eine Reihe wichtiger Entdeckungen über die Materiebausteine Quarks und Gluonen und die Kräfte, welche die Welt im Innersten zusammenhalten, zu verdanken. Zusätzlich wurde die Synchrotronstrahlung für breite Anwendungsgebiete erschlossen und ihre Nutzung systematisch ausgebaut mit Ergebnissen, die gleichrangig neben denen in der Teilchenforschung stehen. Dieses Buch behandelt die Entwicklung des Forschungszentrums von den Anfängen bis in das Jahr 2003, in dem mit dem Beschluss zum Bau des Europäischen Röntgenlasers in Hamburg eine Änderung der Schwerpunktsetzung in der Beschleunigerentwicklung erfolgte, die seitdem auf neuartige Photonenquellen gerichtet ist. Die wichtigsten nachfolgenden Ereignisse werden ebenfalls kurz...

First Ideas Towards the Super-Conducting Magnet Design for the HESR at FAIR

CERN Document Server

Eichhorn, Ralf; Gussen, Achim; Martin, Siegfried

2005-01-01

The Forschungszentrum Juelich has taken the leadership of a consortium being responsible for the design of the HESR going to be part of the FAIR project at GSI. The HESR is a 50 Tm storage ring for antiprotons, based on a super-conducting magnet technology. On basis of the RHIC Dipole D0 (3.6 T), the magnet design for the HESR has started recently. One key issue will be a very compact layout because of the rather short magnets (been 1.82 m for the dipoles and 0.5 m for the other magnets). This paper will present first ideas of the magnetic and cryogenic layout, give a status report on the achievements so far and discuss the need and possible solutions for a bent magnet with a radius of curvature of 13.2 m.

Energy. Supermaterial for solar cells, membranes against the global warming, energy conservation in the greenhouse; Energie. Supermaterial fuer Solarzellen, Membranen gegen die globale Erwaermung, Energiesparen im Treibhaus

Energy Technology Data Exchange (ETDEWEB)

Roegener, Wiebke; Frick, Frank; Tillemans, Axel; Stahl-Busse, Brigitte

2010-07-01

A kaleidoscope of pictures presents highlights from the research at the Forschungszentrum Juelich - from moving into a new computer era over the development of a detector for dangerous liquids up to a new method of treatment against tinnitus. The highlights of this brochure are: (a) An interview with he director of the Oak Ridge National Laboratory on the energy mix of the future; (b) Environment friendly power generation by means of fuel cells; (c) Transfer of knowledge from fusion experiments to greater plants using a supercomputer; (d) Development of powerful batteries for electrically powered cars by means of the know-how from fuel cell research; (e) Investigation of contacting used fuel elements with water; (f) Reduction if energy consumption in a greenhouse using a combination of glass and foils; (g) News on the energy research and environmental research.

Passive decay heat removal by sump cooling after core meltdown

International Nuclear Information System (INIS)

Knebel, J.U.; Mueller, U.

1996-01-01

This article presents the basic physical phenomena and scaling criteria of decay heat removal from a large coolant pool by single-phase and two-phase natural circulation flow. The physical significance of the dimensionless similarity groups derived is evaluated. The above results are applied to the SUCO program that is performed at the Forschungszentrum Karlsruhe. The SUCO program is a three-step series of scaled model experiments investigating the possibility of a sump cooling concept for future light water reactors. The sump cooling concept is based on passive safety features within the containment. The work is supported by the German utilities and the Siemens AG. The article gives first measurement results of the 1:20 linearly scaled plane two-dimensional SUCOS-2D test facility. The experimental results of the model geometry are transformed to prototype conditions

78 FR 76624 - Notice of Agreements Filed

Science.gov (United States)

2013-12-18

... Agreement. Parties: BBC Chartering & Logistic GmbH & Co. KG; Industrial Maritime Carriers LLC; Seaboard... amendment clarifies that BBC Chartering Carriers GmbH & Co. KG (BBC Carriers) and BBC Chartering & Logistic GmbH & Co. KG (BBC Logistic), both common carrier members of BBC Chartering Group, are to be treated...

78 FR 25363 - Airworthiness Directives; Diamond Aircraft Industries Airplanes

Science.gov (United States)

2013-05-01

... holidays. For service information identified in this AD, contact Diamond Aircraft Industries GmbH, N.A... Aircraft Industries GmbH has issued Mandatory Service Bulletin 40NG-018/1, dated November 20, 2012. The... Aircraft Industries GmbH Mandatory Service Bulletin 40NG-018/1, dated November 26, 2012. (2) If chafing...

Analysis of RELAP/SCDAPSIM/MOD3.2 Computer Code using QUENCH Experiments

International Nuclear Information System (INIS)

Honaiser, Eduardo; Anghaie, Samim

2004-01-01

The experiments QUENCH-01/06 were modelled using RELAP5/SCDAPSIM MOD3.2(bd) computer code. The results obtained from these models were compared to the experimental data to evaluate the code performance. The experiments were performed in the Forschungszentrum Karlsruhe (FZK), Germany. The objective of the experimental program was the investigation of the core behaviour during a severe accident, focusing on rod claddings overheat due to zirconium oxidation at high temperatures and due to the strong thermal gradient developed when the nuclear reactor core is flooded as part of an accident management measure. Temperatures histories and hydrogen production were compared. Molecular hydrogen is a product of the oxidation reaction, serving as a parameter to measure the oxidation reaction. After some model adjustments, good predictions were possible. The temperatures and the hydrogen production parameters stayed, most of the transient time, inside the uncertainty envelop. (authors)

The German DEMO working group. Perspectives of a fusion power plant

International Nuclear Information System (INIS)

Hesch, Klaus

2013-01-01

Fusion development has many different challenges in the areas of plasma physics, fusion technologies, materials development and plasma wall interaction. For making fusion power a reality, a coherent approach is necessary, interlinking the different areas of work. To this end, the German fusion program started in 2010 the German DEMO Working Group, bringing together high-level experts from all the different fields, from the 3 German fusion centers Max-Planck-Institut fuer Plasmaphysik (IPP), Karlsruher Institut fuer Technologie (KIT) and Forschungszentrum Juelich (FZJ). An encompassing view of what will be needed with high priority, in plasma physics, in fusion technology and in the interrelation of the fields, to make fusion energy real, has been elaborated, and is presented here in a condensed way. On this basis, the 3 German fusion centers now are composing their work program, towards a fusion demonstration reactor DEMO. (orig.)

CERN Document Server

Sahr, Oliver

2001-01-01

Die Bestimmung der Masse des W-Bosons ist eines der Hauptziele der zweiten Phase des Betriebs des Elektron-Positron-Beschleunigers LEP am europaischen ¨ Forschungszentrum fur¨ Elementarteilchenphysik CERN bei Genf. W-Bosonen werden bei LEP dominant paarweise erzeugt. Zerfallen beide W-Bosonen in ein Quark-Antiquark-Paar spricht man von reinhadronischen W-Paar Ereignissen. Dieser Zerfallskanal spielt bei der Messung der W-Masse eine wichtige Rolle. Die W-Massenbestimmung bei LEP basiert darauf, dass die Zerfallsprodukte in einem Ereignisjeweils einem der beiden W-Bosonen zugeordnet werden und anschließend deren invariante Masse bestimmt wird. Im reinhadronischen Zerfallskanal konnen ¨ Endzustandswechselwirkung zwischen den Zerfallsprodukten der beiden W-Bosonen dazu fuhren, ¨ dass diese Zuordnung nicht mehr eindeutig moglich ¨ ist und die gemessene W-Masse dadurch verschoben wird. Der Begriff “Colour-Reconnection” bezeichnet eine Wechselwirkung, die zu einem Farbfluss zwischen den beiden Quark-Antiqu...

Theoretical and experimental studies of runaway electrons in the TEXTOR tokamak

International Nuclear Information System (INIS)

Abdullaev, S.S.; Finken, K.H.; Wongrach, K.; Willi, O.

2016-01-01

Theoretical and experimental studies of runaway electrons in tokamaks and their mitigations, particularly the recent studies performed by a group of the Heinrich-Heine University Duesseldorf in collaboration with the Institute of Energy and Climate Research of the Research Centre (Forschungszentrum) of Juelich are reviewed. The main topics focus on (i) runaway generation mechanisms, (ii) runaway orbits in equilibrium plasma, (iii) transport in stochastic magnetic fields, (iv) diagnostics and investigations of transport of runaway electron and their losses in low density discharges (v) runaway electrons during plasma disruptions, and (vi) runaway mitigation methods. The development of runaway diagnostics enables the measurement of runaway electrons in both the centre and edge of the plasma. The diagnostics provide an absolute runaway energy resolved measurement, the radial decay length of runaway electrons and, the structure and dynamics of runaway electron beams. The new mechanism of runaway electron formation during plasma disruptions is discussed.

Technical meeting to 'Review of national programmes on fast reactors and accelerator driven systems (ADS)'. Working material

International Nuclear Information System (INIS)

2002-01-01

The 35th Annual Meeting of the Technical Working Group on Fast Reactors TWG-FR, previously International Working Group on Fast Reactors (IWG-FR, created in 1967), was hosted by the Forschungszentrum Karlsruhe (FZK) and was attended by TWG-FR members and advisers from the following Member States: Brazil, China, France, Germany, India, Japan, the Republic of Kazakhstan, the Republic of Korea, the Russian Federation, and the United States of America. The objectives of the meeting were: to exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); to review the progress since the 34th TWG-FR Annual Meeting, including the status of the actions; to consider meeting arrangements for 2002 and 2003; to review the Agency's co-ordinated research activities in the field of FRs and ADS, as well as co-ordination of the TWG-FR's activities with other organizations

Simulation of the Quench-06 experiment with Scdapsim; Simulacion del experimento Quench-06 con Scdapsim

Energy Technology Data Exchange (ETDEWEB)

Angel M, E. del; Nunez C, A.; Amador G, R. [CNSNS, Dr. Barragan No. 779, 03020 Mexico D.F. (Mexico)]. e-mail: edangelm@cnsns.gob.mx

2003-07-01

The present work describes the pattern of the called Quench installation developed and used by the National Commission of Nuclear Security and Safeguards (CNSNS) for their participation in the International Standard Problem 45 (ISP), organized by the Nuclear Energy Agency (NEA). The exercise consisted on the simulation of the denominated experiment Quench-06 carried out in the experimental installation Quench located in the Forschungszentrum laboratory in Karlsruhe, Germany. The experiment Quench-06 consisted on simulating the sudden and late injection of water in a fuel assemble for a pressurized reactor (PWR). The CNSNS uses the version bd of the SCDAPSIM code developed by the company Innovative Software Systems (ISS) to simulate this experiment. The obtained results showed that the code is able to predict the experiment partially when overestimating the hydrogen production and of the partial fused of some fuel pellets, but predicting correctly the damage in the shroud. (Author)

The second advanced lead lithium blanket concept using ODS steel as structural material and SiCf/SiC flow channel inserts as electrical and thermal insulators (Task PPA 2.5). Final report

International Nuclear Information System (INIS)

Norajitra, P.; Buehler, L.; Fischer, U.

1999-12-01

Preparatory work on the advanced dual coolant (A-DCL) blanket concept using SiC f /SiC flow channel inserts as electrical and thermal insulators has been carried out at the Forschungszentrum Karlsruhe in co-operation with CEA as a conceptual design proposal to the EU fusion power plant study planned to be launched in 2000 within the framework of the EU fusion programme with the main objective of specifying the characteristics of an attractive and viable commercial D-T fusion power plant. The basic principles and design characteristics of this A-DCL blanket concept are presented and its potential with regard to performance (neutron wall load, lifetime, availability) is discussed in this report. The results of this study show that the A-DCL blanket concept has a high potential for further development due to its high thermal efficiency and its simple concept solution. (orig.) [de

Technical meeting to 'Review of national programmes on fast reactors and accelerator driven systems (ADS)'. Working material

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

The 35th Annual Meeting of the Technical Working Group on Fast Reactors TWG-FR, previously International Working Group on Fast Reactors (IWG-FR, created in 1967), was hosted by the Forschungszentrum Karlsruhe (FZK) and was attended by TWG-FR members and advisers from the following Member States: Brazil, China, France, Germany, India, Japan, the Republic of Kazakhstan, the Republic of Korea, the Russian Federation, and the United States of America. The objectives of the meeting were: to exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); to review the progress since the 34th TWG-FR Annual Meeting, including the status of the actions; to consider meeting arrangements for 2002 and 2003; to review the Agency's co-ordinated research activities in the field of FRs and ADS, as well as co-ordination of the TWG-FR's activities with other organizations.

Theoretical and experimental studies of runaway electrons in the TEXTOR tokamak

Energy Technology Data Exchange (ETDEWEB)

Abdullaev, S.S.; Finken, K.H.; Wongrach, K.; Willi, O.

2016-07-01

Theoretical and experimental studies of runaway electrons in tokamaks and their mitigations, particularly the recent studies performed by a group of the Heinrich-Heine University Duesseldorf in collaboration with the Institute of Energy and Climate Research of the Research Centre (Forschungszentrum) of Juelich are reviewed. The main topics focus on (i) runaway generation mechanisms, (ii) runaway orbits in equilibrium plasma, (iii) transport in stochastic magnetic fields, (iv) diagnostics and investigations of transport of runaway electron and their losses in low density discharges (v) runaway electrons during plasma disruptions, and (vi) runaway mitigation methods. The development of runaway diagnostics enables the measurement of runaway electrons in both the centre and edge of the plasma. The diagnostics provide an absolute runaway energy resolved measurement, the radial decay length of runaway electrons and, the structure and dynamics of runaway electron beams. The new mechanism of runaway electron formation during plasma disruptions is discussed.

HTGR programme in the United States of America

International Nuclear Information System (INIS)

Fox, J.E.

1991-01-01

The HTGR is being developed by the US Department of Energy within the Division of HTGRs is reported. Fuel design, development and demonstration activities are being conducted by General Atomics and Oak Ridge National Laboratory. During FY-1990 the US continued work in cooperative projects with the KFA-Forschungszentrum Juelich and the Japan Atomic Energy Research Institute on post irradiation examination of fuel capsules and continued the Fission Product Transport Test Program with the French Commissariat a l'Energie Atomique in the COMEDIE in-pile loop at the SILOE reactor at Grenoble. Other activities included installation of the high temperature core-conduction-cooldown test furnace at ORNL which will be used for testing of irradiated fuel compacts under accident conditions. Finally, the US fuel performance experts participated in the MHTGR Cost Reduction Study which is a major effort within the US commercial MHTGR program. 1 tab

Simulation of the Quench-06 experiment with Scdapsim

International Nuclear Information System (INIS)

Angel M, E. del; Nunez C, A.; Amador G, R.

2003-01-01

The present work describes the pattern of the called Quench installation developed and used by the National Commission of Nuclear Security and Safeguards (CNSNS) for their participation in the International Standard Problem 45 (ISP), organized by the Nuclear Energy Agency (NEA). The exercise consisted on the simulation of the denominated experiment Quench-06 carried out in the experimental installation Quench located in the Forschungszentrum laboratory in Karlsruhe, Germany. The experiment Quench-06 consisted on simulating the sudden and late injection of water in a fuel assemble for a pressurized reactor (PWR). The CNSNS uses the version bd of the SCDAPSIM code developed by the company Innovative Software Systems (ISS) to simulate this experiment. The obtained results showed that the code is able to predict the experiment partially when overestimating the hydrogen production and of the partial fused of some fuel pellets, but predicting correctly the damage in the shroud. (Author)

Proceedings of the Symposium on Fluid-Solid Surface Intractions (2nd) Held at the Naval Ship Research and Development Center, Bethesda, Maryland, June 5-7, 1974,

Science.gov (United States)

1974-11-29

sponsored by the German Ministry of Defense and organized by Dornier System, GmbH, Friedrichshafen . The encouraging results of the Meersburg meeting...Republic of Germany BHrwinkel, K. Dornier System GmbH, 799 Friedrichshafen , Rieger, H. Federal Republic of Germany Seidl, M. Bossel, U.G. Deutsche...Technological Importance of Gas-Solid Surface Interactions G. Hoff Dornier System GmbH 799 Friedrichshafen , Germany Any reasonable investigation of the

Assessment of Surface Ship Maintenance Requirements

Science.gov (United States)

2015-01-01

major failure is ensured, precluding wear- 2 MTU Friedrichshafen GmBH, “Technical Project Guide, Marine Application, Part 1-General,” revision 1.0...Friedrich- shafen, Germany: MTU Friedrichshafen GmbH, June 2003. Figure A.1 Observed Categories of Casualty Rates RAND RR1155-A.1 Characteristic...17, 2013. MTU Friedrichshafen GmbH, “Technical Project Guide, Marine Application, Part 1-General,” revision 1.0, Friedrichshafen , Germany: MTU

77 FR 75189 - Certain Light-Emitting Diodes and Products Containing Same; Commission Determination Not To...

Science.gov (United States)

2012-12-19

... Corporate Center USA, Hella, Inc., Automotive Lighting Reutlingen GmbH, Automotive Lighting LLC, Tecnologia..., Inc., Automotive Lighting Reutlingen GmbH, Automotive Lighting, LLC, and [[Page 75190

75 FR 7936 - Airworthiness Directives; SCHEIBE-Flugzeugbau GmbH Model SF 25C Gliders

Science.gov (United States)

2010-02-23

... the lower side of the wing), disconnect the aileron from the wings, disconnect the elevator from the... connected to the ribs and the spar with steel tube rivets, no further action is required. (3) If the aileron hinges or the stabilizer to fuselage fittings are connected to the ribs and the spar with brass tube...

77 FR 51462 - Airworthiness Directives; BRP-Powertrain GmbH & Co KG Rotax Reciprocating Engines

Science.gov (United States)

2012-08-24

... to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. Fax... holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other...

78 FR 48795 - Airworthiness Directives; BRP-Powertrain GmbH & Co KG Rotax Reciprocating Engines

Science.gov (United States)

2013-08-12

... AD to prevent excessive oil consumption, which could result in an in-flight engine shutdown, forced... consumption, which could result in an in-flight engine shutdown, forced landing, and damage to the airplane... average labor rate is $85 per hour. Based on these figures, we estimate the cost of this AD on U.S...

Ingrid Rinner-Kuhn v. FWW. Spezial-Gebaudereinigung GmbH. and Co. [13 July 1989].

Science.gov (United States)

1989-01-01

The plaintiff worked 10 hours a week for the defendant and, when she became ill, sought payment of her wages under the German sick pay law. After her employer refused to pay her, citing a provision of the German law that exempted employers from paying for sickness leave when a worker works fewer than 10 hours a week, she challenged the law as violating equal pay provisions of Article 119 of the European Communities Treaty. To support her challenge she pointed to statistics showing that a far greater percentage of workers working no more than 10 hours a week were women than men. Upon referral of the case by the German court hearing it, the European Court of Justice held that Article 119 precludes national legislation permitting employers to exclude from payment of sick pay employees who do not work more than 10 hours a week if that measure affects a far greater number of men than women, unless it is shown that the legislation is justified by objective facts unrelated to any discrimination based on sex. It also ruled that it was up to the German court to determine whether the legislation in question was so justified.

Neutron diffraction from holographic gratings in PMMA

International Nuclear Information System (INIS)

Havermeyer, F.; Kraetzig, E.; Rupp, R.A.; Schubert, D.W.

1999-01-01

Complete text of publication follows. By definition photorefractive materials change the refractive index for light under the action of light. Using the spatially modulated light intensity pattern from the interference of two plane waves, volume phase gratings with accurately defined spacings can be produced. Depending on the material there are many physical origins for these gratings, but in most cases they are linked to a density modulation and, consequently, to a refractive index grating for neutrons. By diffraction of light or neutrons from such gratings even small refractive index changes down to Δn ∼ 10 -7 - 10 -9 can be measured. In our photopolymer system PMMA/MMA (poly(methyl methacrylate) with a content of 10-20% of the residual monomer methyl methacrylate) inhomogeneous illumination leads to local post-polymerisation processes of the residual monomer. The resulting light-optical refractive index grating is caused by the modulation of the monomer/polymer ratio as well as by the modulation of the total density. Only by the unique combination of methods for light and neutron diffraction, available at HOLONS (Holography and Neutron Scattering, instrument at the GKSS research centre), both contributions can be separated. We discuss the angular dependence of the neutron diffraction efficiency for weakly and strongly (efficiencies up to 60% have been achieved) modulated gratings and propose a simple model for the evaluation of the gratings. (author)

Analysis of size effect applicable to evaluation of fracture toughness of base metal for PWR vessel

International Nuclear Information System (INIS)

Benhamou, C.; Joly, P.; Andrieu, A.; Parrot, A.; Vidard, S.

2015-01-01

The objective of the present paper is to review the specimen size effect (also called crack front length effect) on Fracture Toughness of PWR Reactor Pressure Vessel Steel base metal. The analysis of the reality and amplitude of this effect is conducted in a first step on a database (the so-called GKSS database) including fracture toughness test results on a single representative material using specimens of different thicknesses, tested in the same temperature range. A realistic analytical form for describing the size effect observed in this data set is thus derived from statistical analyses and proposed for engineering application. In a second step, this size effect formulation is then applied to a large number of fracture toughness data, obtained in Irradiation Surveillance Programs, and also to the numerous data used for the definition of the ASME (and RCC-M) fracture toughness reference curves. This analysis allows normalizing all the available fracture toughness data with a single specimen width of 100 mm and defining the fracture toughness reference curve as the lower bound of this normalized set of data points. It is thus demonstrated that the fracture toughness reference curve is associated with a reference crack length of 100 mm, and can be used in RPV integrity analyses for other crack front length in association with the crack front length correction formula defined in the first step. (authors)

Measurement of Systematic Error Effects for a Sensitive Storage Ring EDM Polarimeter

Science.gov (United States)

Imig, Astrid; Stephenson, Edward

2009-10-01

The Storage Ring EDM Collaboration was using the Cooler Synchrotron (COSY) and the EDDA detector at the Forschungszentrum J"ulich to explore systematic errors in very sensitive storage-ring polarization measurements. Polarized deuterons of 235 MeV were used. The analyzer target was a block of 17 mm thick carbon placed close to the beam so that white noise applied to upstream electrostatic plates increases the vertical phase space of the beam, allowing deuterons to strike the front face of the block. For a detector acceptance that covers laboratory angles larger than 9 ^o, the efficiency for particles to scatter into the polarimeter detectors was about 0.1% (all directions) and the vector analyzing power was about 0.2. Measurements were made of the sensitivity of the polarization measurement to beam position and angle. Both vector and tensor asymmetries were measured using beams with both vector and tensor polarization. Effects were seen that depend upon both the beam geometry and the data rate in the detectors.

MEGAPIE, a 1 MW pilot experiment for a liquid metal spallation target

Energy Technology Data Exchange (ETDEWEB)

Bauer, G.S. [Paul Scherrer Institut, Spallation Neutron Source Division, Villigen-PSI (Switzerland); Salvatores, M. [CEA Cadarache, Direction des Reacteurs Nucleaires, Saint-Paul-lez-Durance Cedex (France); Heusener, G. [Forschungszentrum Karlsruhe, Projekt Nukleare Sicherheitsforschung, Karlsruhe (Germany)

2001-03-01

MEGAPIE (Megawatt Pilot Target Experiment) is an initiative launched by Commissariat a l'Energie Atomique, Cadarache (France) and Forschungszentrum Karlsruhe (Germany) in collaboration with Paul Scherrer Institut (Switzerland), to demonstrate, in an international collaboration, the feasibility of a liquid lead bismuth target for spallation facilities at a beam power level of 1 MW. Such a target is under consideration for various concepts of accelerator driven systems (ADS) to be used in transmutation of nuclear waste and other applications world-wide. It also has the potential of increasing significantly the thermal neutron flux available at the spallation neutron source (SINQ) for neutron scattering. SINQ's beam power being close to 1 MW already, this facility offers a unique opportunity to realize such an experiment with a reasonably small number of new ancillary systems. The paper describes the basic features of the experiment and its boundary conditions, the technical concept of the target and underlying research carried out at participating laboratories. (author)

The Panda Strip Asic: Pasta

Science.gov (United States)

Lai, A.

2018-01-01

PASTA is the 64 channel front-end chip, designed in a 110 nm CMOS technology to read out the strip sensors of the Micro Vertex Detector (MVD) of the PANDA experiment. This chip provides high resolution timestamp and deposited charge information by means of the time-over-threshold technique. Its working principle is based on a predecessor, the TOFPET ASIC, that was designed for medical applications. A general restructuring of the architecture was needed, in order to meet the specific requirements imposed by the physics programme of PANDA, especially in terms of radiation tolerance, spatial constraints, and readout in absence of a first level hardware trigger. The first revision of PASTA is currently under evaluation at the Forschungszentrum Jülich, where a data acquisition system dedicated to the MVD prototypes has been developed. This paper describes the main aspect of the chip design, gives an overview of the data acquisition system used for the verification, and shows the first results regarding the performance of PASTA.

HNF - Helmholtz Nano Facility

Directory of Open Access Journals (Sweden)

Wolfgang Albrecht

2017-05-01

Full Text Available The Helmholtz Nano Facility (HNF is a state-of-the-art cleanroom facility. The cleanroom has ~1100 m2 with cleanroom classes of DIN ISO 1-3. HNF operates according to VDI DIN 2083, Good Manufacturing Practice (GMP and aquivalent to Semiconductor Industry Association (SIA standards. HNF is a user facility of Forschungszentrum Jülich and comprises a network of facilities, processes and systems for research, production and characterization of micro- and nanostructures. HNF meets the basic supply of micro- and nanostructures for nanoelectronics, fluidics. micromechanics, biology, neutron and energy science, etc.. The task of HNF is rapid progress in nanostructures and their technology, offering efficient access to infrastructure and equipment. HNF gives access to expertise and provides resources in production, synthesis, characterization and integration of structures, devices and circuits. HNF covers the range from basic research to application oriented research facilitating a broad variety of different materials and different sample sizes.

High heat flux components with Be armour before and after neutron irradiation

International Nuclear Information System (INIS)

Lodato, A.; Derz, H.; Duwe, R.; Linke, J.; Roedig, M.

2000-01-01

Beryllium/copper mock-ups produced by different joining techniques have been tested in the electron beam facility JUDITH (Juelich Divertor Test Facility in Hot Cells) at Forschungszentrum Juelich. The experiments described in this paper represent the conclusive part of a test program started in 1994. The properties of non-irradiated Be/Cu joints have been characterised in a previous test campaign. Post-irradiation tests are now being carried out to investigate the neutron damage on the joints. The neutron irradiation on selected mock-ups has been carried out in the High Flux Reactor (HFR) at Petten (The Netherlands). Parametric finite element thermal analyses have been carried out to establish the allowable heat flux value to be applied during the tests. Screening tests up to power densities of ∼7 MW/m 2 and thermal fatigue tests up to 1000 cycles have been performed. None of these mock-ups showed any indication of failure. Post-mortem analyses (metallography, SEM) have also been conducted

B-Identifikation im Level 2 Trigger des ATLAS Experiments

CERN Document Server

AUTHOR|(CDS)2072780

Zur Zeit wird am europäischen Forschungszentrum für Teilchenphysik CERN der neue Proton-Proton-Speicherring LHC und die zugehörigen vier Experimente gebaut. Ziele der Experimente sind unter anderem der Nachweis des Higgs-Bosons sowie detaillierte Studien des top-Quarks. Um möglichst reine Datensätze zu erhalten wäre es hilfreich, diese Ereignisse bereits während der Datennahme möglichst effizient zu selektieren. Dabei würde es helfen, wenn b-Quark-Jets auf Trigger-Niveau erkannt werden könnten. Ziel der Arbeit war die Entwicklung eines Algorithmus zur Identifikation von b-Quark-Jets, welcher die Anforderungen des Level 2 Triggers erfüllt. Das erste Kapitel der Arbeit gibt einen Einblick in die wesentlichen Bestandteile des Standardmodells der Teilchenphysik. In den folgenden zwei Kapiteln wird der Beschleuniger und der ATLAS Detektor sowie das ATLAS-Triggersystem beschrieben. Kapitel vier beschreibt die Möglichkeiten der B-Jet-Identifikation sowie einen Vertexalgorithmus auf Basis der Perigee-Pa...

Improvements in electron beam monitoring and heat flux flatness at the JUDITH 2-facility

Energy Technology Data Exchange (ETDEWEB)

Weber, Thomas, E-mail: weber.th@gmx.de [Forschungszentrum Jülich, Institute of Energy and Climate Research, Jülich (Germany); Bürger, Andreas; Dominiczak, Karsten; Pintsuk, Gerald [Forschungszentrum Jülich, Institute of Energy and Climate Research, Jülich (Germany); Banetta, Stefano; Bellin, Boris [Fusion for Energy, Josep Pla, 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Mitteau, Raphael; Eaton, Russell [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St Paul Lez Durance Cedex (France)

2015-10-15

Highlights: • Monitoring of the much faster electron beam motion by IR camera through a synchronized frame triggering. • Estimation of the heat flux generated by electron beam guns based on calorimetry and FEM simulations. • Consideration of the inclined electron beam loading of rectangular-shaped objects. - Abstract: Three beryllium-armoured small-scale mock-ups and one semi-prototype for the ITER first wall were tested by the electron beam facility JUDITH 2 at Forschungszentrum Jülich. Both testing campaigns with cyclic loads up to 2.5 MW/m{sup 2} are carried out in compliance with the extensive quality and management specifications of ITER Organization (IO) and Fusion for Energy (F4E). Several dedicated calibration experiments were performed before the actual testing in order to fulfil the testing requirements and tolerances. These quality requests have been the motivation for several experimental setup improvements. The most relevant results of these activities, being the electron beam monitoring and the heat flux flatness verification, will be presented.

High-accuracy mass spectrometry for fundamental studies.

Science.gov (United States)

Kluge, H-Jürgen

2010-01-01

Mass spectrometry for fundamental studies in metrology and atomic, nuclear and particle physics requires extreme sensitivity and efficiency as well as ultimate resolving power and accuracy. An overview will be given on the global status of high-accuracy mass spectrometry for fundamental physics and metrology. Three quite different examples of modern mass spectrometric experiments in physics are presented: (i) the retardation spectrometer KATRIN at the Forschungszentrum Karlsruhe, employing electrostatic filtering in combination with magnetic-adiabatic collimation-the biggest mass spectrometer for determining the smallest mass, i.e. the mass of the electron anti-neutrino, (ii) the Experimental Cooler-Storage Ring at GSI-a mass spectrometer of medium size, relative to other accelerators, for determining medium-heavy masses and (iii) the Penning trap facility, SHIPTRAP, at GSI-the smallest mass spectrometer for determining the heaviest masses, those of super-heavy elements. Finally, a short view into the future will address the GSI project HITRAP at GSI for fundamental studies with highly-charged ions.

LAP-ND: a new instrument for vector polarization analysis and neutron depolarization measurements at FRJ-2

International Nuclear Information System (INIS)

Ioffe, Alexander; Bussmann, Klaus; Dohmen, Ludwig; Axelrod, Leonid; Gordeev, Gennadi; Brueckel, Thomas

2004-01-01

The method of vector analysis of the neutron polarization allows for the determination of both the magnitude and the direction of the magnetization vector in the sample. A directional distribution of the magnetization in a sample results in a spread of the direction of the polarization vector in space and thus in the depolarization of the incident beam. A new neutron depolarization set up is installed at the research reactor FRJ-2 of the Forschungszentrum Juelich. The main feature of the set up is the use of rather long wavelength, λ=(4-6.5) A, neutrons thus allowing for a significant increase in the sensitivity of depolarization measurements. The set up uses a non-cryogenic zero-field sample chamber with the residual magnetic field of about 1 mG. It will be used for the determination of the sample magnetization at mesoscopic and macroscopic levels and for the study of magnetic phase transitions, magnetic nanostructures, magnetic glasses, etc

Literatur zu Gast im Globe

CERN Multimedia

2006-01-01

Der deutsche Schriftsteller Thomas LEHR liest am 23. März 2006 aus seinem Roman '42', einem philosophischen Abenteuerroman über die Suche nach der Zeit, erzählt in einer funkelnden und souveränen Sprache. Eine Welt von vernichtender Schönheit und bizarren Schrecken wartet auf eine Besuchergruppe, die in der Nähe von Genf die unterirdischen Anlagen des Forschungszentrums für Teilchenphysik CERN besichtigt. Als sie um 12:47:42 wieder ans Tageslicht tritt, scheint ganz Europa in einen Dornröschenschlaf gefallen. Allein die 70 Besucher können sich noch bewegen. Monate und Jahre verharrt die Welt wie in einer riesigen dreidimensionalen Fotografie, bis ein wiederum schockierendes Ereignis die 'Chronifizierten' aus ihren physikalischen Spekulationen und seltsamen Lebensformen reisst. Zu dieser literarischen Veranstaltung im 'Globe of Science and Innovation' laden gemeinsam das Generalkonsulat der Bundesrepublik Deutschland in Genf und CERN ein. Vor Beginn der Lesung wird eine Führung in deutscher Sprac...

Coupling of the neutron-kinetic core model DYN3D with the thermal hydraulic code FLICA-4 within the NURESIM platform

International Nuclear Information System (INIS)

Gommlich, A.; Kliem, S.; Rohde, U.; Gomez, A.; Sanchez, V.

2010-01-01

Within the FP7 Collaborative Project NURISP (NUclear Reactor Integrated Simulation Project) new and significant steps will be done towards a European Reference Simulation Platform for applications relevant to present PWR and BWR and to future reactors. The first step towards this target has been made during the FP6 NURESIM Integrated Project, where the already common and well-proven NURESIM informatics platform has been developed. This platform is based on the open source software SALOME. The 3D neutron kinetic core model DYN3D developed at Forschungszentrum Dresden-Rossendorf is part of the NURESIM platform. Within the NURESIM project, a SALOME based pre-processor for creation of DYN3D input data sets via GUI has been developed. DYN3D has been implemented into SALOME as black box, which allowed an independent execution. A conversion of the DYN3D result file into SALOME format was developed which opened the possibility using SALOME tools to visualize DYN3D results. (orig.)

MEGAPIE, a 1 MW pilot experiment for a liquid metal spallation target

International Nuclear Information System (INIS)

Bauer, G.S.; Salvatores, M.; Heusener, G.

2001-01-01

MEGAPIE (Megawatt Pilot Target Experiment) is an initiative launched by Commissariat a l'Energie Atomique, Cadarache (France) and Forschungszentrum Karlsruhe (Germany) in collaboration with Paul Scherrer Institut (Switzerland), to demonstrate, in an international collaboration, the feasibility of a liquid lead bismuth target for spallation facilities at a beam power level of 1 MW. Such a target is under consideration for various concepts of accelerator driven systems (ADS) to be used in transmutation of nuclear waste and other applications world-wide. It also has the potential of increasing significantly the thermal neutron flux available at the spallation neutron source (SINQ) for neutron scattering. SINQ's beam power being close to 1 MW already, this facility offers a unique opportunity to realize such an experiment with a reasonably small number of new ancillary systems. The paper describes the basic features of the experiment and its boundary conditions, the technical concept of the target and underlying research carried out at participating laboratories. (author)

Evolution of the two-phase flow in a vertical tube-decomposition of gas fraction profiles according to bubble size classes using wire-mesh sensors

Energy Technology Data Exchange (ETDEWEB)

Prasser, H.M.; Krepper, E.; Lucas, D. [Forschungszentrum Rossendorf e.V., Dresden (Germany)

2002-01-01

The wire-mesh sensor developed by the Forschungszentrum Rossendorf produces sequences of instantaneous gas fraction distributions in a cross section with a time resolution of 1200 frames per second and a spatial resolution of about 2-3 mm. At moderate flow velocities (up to 1-2 m.s{sup -1}), bubble size distributions can be obtained, since each individual bubble is mapped in several successive distributions. The method was used to study the evolution of the bubble size distribution in a vertical two-phase flow. For this purpose, the sensor was placed downstream of an air injector, the distance between air injection and sensor was varied. The bubble identification algorithm allows to select bubbles of a given range of the effective diameter and to calculate partial gas fraction profiles for this diameter range. In this way, the different behaviour of small and large bubbles in respect to the action of the lift force was observed in a mixture of small and large bubbles. (authors)

Understanding and managing health and environmental risks of CIS, CGS, and CdTe photovoltaic module production and use: A workshop

Energy Technology Data Exchange (ETDEWEB)

Moskowitz, P.D.; Zweibel, K.; DePhillips, M.P. [eds.

1994-04-28

Environmental, health and safety (EH&S) risks presented by CIS, CGS and CdTe photovoltaic module production, use and decommissioning have been reviewed and discussed by several authors. Several EH&S concerns exit. The estimated EH&S risks are based on extrapolations of toxicity, environmental mobility, and bioavailability data for other related inorganic compounds. Sparse data, however, are available for CIS, CGS or CdTe. In response to the increased interest in these materials, Brookhaven National Laboratory (BNL) has been engaged in a cooperative research program with the National Renewable Energy Laboratory (NREL), the Fraunhofer Institute for Solid State Technology (IFT), the Institute of Ecotoxicity of the GSF Forschungszentrum fair Umwelt und Gesundheit, and the National Institute of Environmental Health Sciences (NIEHS) to develop fundamental toxicological and environmental data for these three compounds. This workshop report describes the results of these studies and describes their potential implications with respect to the EH&S risks presented by CIS, CGS, and CdTe module production, use and decommissioning.

A review of optical measurements at the aerosol and cloud chamber AIDA

International Nuclear Information System (INIS)

Wagner, Robert; Linke, Claudia; Naumann, Karl-Heinz; Schnaiter, Martin; Vragel, Marlen; Gangl, Martin; Horvath, Helmuth

2009-01-01

This paper provides a survey of recent studies on the optical properties of aerosol and cloud particles that have been conducted at the AIDA facility of Forschungszentrum Karlsruhe (Aerosol Interactions and Dynamics in the Atmosphere). Reflecting the broad accessible temperature range of the AIDA chamber which extends from ambient temperature down to 183 K, the investigations feature a broad diversity of research topics, such as the wavelength-dependence of the specific absorption cross sections of soot and mineral dust aerosols at room temperature, depolarization and infrared extinction measurements of ice crystal clouds generated at temperatures below 235 K, and the optical properties of polar stratospheric cloud constituents whose formation was studied in chamber experiments at temperatures well below 200 K. After reviewing the AIDA research activity of the past decade and introducing the optical instrumentation of the AIDA facility, this paper presents illustrative examples of ongoing and already published work on optical measurements of soot aerosols, mineral dust particles, and ice crystal clouds.

Improvements in electron beam monitoring and heat flux flatness at the JUDITH 2-facility

International Nuclear Information System (INIS)

Weber, Thomas; Bürger, Andreas; Dominiczak, Karsten; Pintsuk, Gerald; Banetta, Stefano; Bellin, Boris; Mitteau, Raphael; Eaton, Russell

2015-01-01

Highlights: • Monitoring of the much faster electron beam motion by IR camera through a synchronized frame triggering. • Estimation of the heat flux generated by electron beam guns based on calorimetry and FEM simulations. • Consideration of the inclined electron beam loading of rectangular-shaped objects. - Abstract: Three beryllium-armoured small-scale mock-ups and one semi-prototype for the ITER first wall were tested by the electron beam facility JUDITH 2 at Forschungszentrum Jülich. Both testing campaigns with cyclic loads up to 2.5 MW/m"2 are carried out in compliance with the extensive quality and management specifications of ITER Organization (IO) and Fusion for Energy (F4E). Several dedicated calibration experiments were performed before the actual testing in order to fulfil the testing requirements and tolerances. These quality requests have been the motivation for several experimental setup improvements. The most relevant results of these activities, being the electron beam monitoring and the heat flux flatness verification, will be presented.

J-NSE: Neutron spin echo spectrometer

Directory of Open Access Journals (Sweden)

Olaf Holderer

2015-08-01

Full Text Available Neutron Spin-Echo (NSE spectroscopy is well known as the only neutron scattering technique that achieves energy resolution of several neV. By using the spin precession of polarized neutrons in magnetic field one can measure tiny velocity changes of the individual neutron during the scattering process. Contrary to other inelastic neutron scattering techniques, NSE measures the intermediate scattering function S(Q,t in reciprocal space and time directly. The Neutron Spin-Echo spectrometer J-NSE, operated by JCNS, Forschungszentrum Jülich at the Heinz Maier-Leibnitz Zentrum (MLZ in Garching, covers a time range (2 ps to 200 ns on length scales accessible by small angle scattering technique. Along with conventional NSE spectroscopy that allows bulk measurements in transmission mode, J-NSE offers a new possibility - gracing incidence spin echo spectroscopy (GINSENS, developed to be used as "push-button" option in order to resolve the depth dependent near surface dynamics.

Measurement of the inelastic neutron scattering cross section of 56Fe

Directory of Open Access Journals (Sweden)

Nolte R.

2010-10-01

Full Text Available At the superconducting electron linear accelerator ELBE at Forschungszentrum Dresden-Rossendorf the neutron time-of-flight facility nELBE has become operational. Fast neutrons in the energy range from 200 keV to 10 MeV are produced by the pulsed electron beam from ELBE impinging on a liquid lead circuit as a radiator. The short beam pulses of 10 ps provide the basis for an excellent time resolution for neutron time-of-flight experiments, giving an energy resolution of about <1% at 1 MeV with a short flight path of 5 m. By means of a “double-time-of-flight” setup the (n,nâγ cross section to the first excited state of 56Fe has been measured over the whole energy range without knowledge about cross sections of higher-lying levels. Plastic scintillators were used to detect the inelastically scattered neutron and BaF2 detectors to detect the correlated γ-ray.

Nuclear waste in Seibersdorf

International Nuclear Information System (INIS)

Anon.

1988-01-01

Forschungszentrum Seibersdorf (short: Seibersdorf) is the company operating the research reactor ASTRA. A controversy arose, initied by the Greens and some newspapers on the fact that the waste conditioning plant in Seibersdorf treated not only Austrian waste (from hospitals etc.) but also a large quantity of ion exchange resins from the Caorso nuclear power station, against payment. The author argues that it is untenable that an Austrian institution (peaceful use of nuclear energy in Austria being abandoned by a referendum) should support nuclear power abroad. There is also a short survey on nuclear waste conditioning and an account of an exchange of letters, between the Seibersdorf and the Ecology Institute on the claim of being an 'independent measuring institution' of food, soil, etc. samples. The author argues that the Ecology Institute is the sole independent institution in Austria because it is part of the ecology- and antinuclear movement, whereas Seibersdorf is dependent on the state. (qui)

Near threshold production of η-mesons in proton neutron collisions at ANKE

International Nuclear Information System (INIS)

Schröer, Daniel; Fritzsch, Christopher; Khoukaz, Alfons; Rump, Marcel

2016-01-01

The interaction between hadrons and η-mesons is an intensively studied topic. Due to its stength it might lead to the formation of η-mesic nuclei. In order to study the characteristics of this interaction a measurement of the reaction p + d → d + η + p_s_p has been performed at the ANKE spectrometer at the COSY accelerator of the Forschungszentrum Jülich. The two different beam momenta (p_1 = 2.09 GeV/c and p_2 = 2.25 GeV/c) in combination with the Fermi motion inside the target deuteron grant access to the determination of total and differential cross sections in an excess energy range from threshold up to Q = 90 MeV. While the course of the total cross section, especially near threshold, will allow to extract the scattering length a_d_η via an s-wave final state interaction ansatz, the differential cross sections permit to verify the legitimacy of the s-wave assumption.

LAP-ND: a new instrument for vector polarization analysis and neutron depolarization measurements at FRJ-2

Energy Technology Data Exchange (ETDEWEB)

Ioffe, Alexander; Bussmann, Klaus; Dohmen, Ludwig; Axelrod, Leonid; Gordeev, Gennadi; Brueckel, Thomas

2004-07-15

The method of vector analysis of the neutron polarization allows for the determination of both the magnitude and the direction of the magnetization vector in the sample. A directional distribution of the magnetization in a sample results in a spread of the direction of the polarization vector in space and thus in the depolarization of the incident beam. A new neutron depolarization set up is installed at the research reactor FRJ-2 of the Forschungszentrum Juelich. The main feature of the set up is the use of rather long wavelength, {lambda}=(4-6.5) A, neutrons thus allowing for a significant increase in the sensitivity of depolarization measurements. The set up uses a non-cryogenic zero-field sample chamber with the residual magnetic field of about 1 mG. It will be used for the determination of the sample magnetization at mesoscopic and macroscopic levels and for the study of magnetic phase transitions, magnetic nanostructures, magnetic glasses, etc.

Microspheres Prepared by Internal Gelation for Actinide Co-Conversion - Influence of Organic Precursors in Initial Solution on Structure during Thermal Treatment

International Nuclear Information System (INIS)

Benay, G.; Modolo, G.; Robisson, A.C.; Grandjean, S.

2008-01-01

The fabrication of fuels or targets for transmutation of minor actinides requires a dust-free process. Such a requirement can be fulfilled by sol-gel methods, which allow the production of microsphere precursors. Internal gelation, one of these methods, was studied at Cea Marcoule and FZ (Forschungszentrum Juelich Germany). A study of the parameters involved in internal gelation (essentially the quantity of organic additives urea and hexa-methylene-tetramine (HMTA) present in the initial solution) was performed. Afterwards, the effects of these parameters on the structural evolution of the microspheres during thermal treatment were studied. It was observed that the structure and density of the microspheres are heavily dependant of the quantity of organic precursors present in the initial solution. Urea in particular has been found to bring porosity to the material, in addition to its catalytic effect on HMTA decomposition. The elimination of these organic compounds is however a major issue which causes the formation of cracks on the microspheres if no optimization is performed. (authors)

ATLAS virtual visit features Al-Quds University, a Palestinian university with campuses in Abu Dis and al-Bireh.

CERN Multimedia

claudia marcelloni

2012-01-01

Mon, 02 Apr - 14:00 CET (15:00 local) ATLAS virtual visit features Al-Quds University, a Palestinian university with campuses in Abu Dis and al-Bireh. As part of the "Physics Without Frontiers" project, funded by ICTP, Al-Quds is hosting a one day particle physics masterclass. During the day the students are given an introduction to particle physics, the LHC and the ATLAS Experiment, before having the chance to analyse real LHC data. This virtual visit comprises of a live tour around the ATLAS control room and the opportunity to ask questions to the ATLAS physicists. Al-Quds Physics has active research in accelerators, biophysics, laser, nuclear & particle, plasma, and solid state. A new collaboration is underway Forschungszentrum Jülich in spintronics, bioelectronics Alquds Physics is involved in the regional synchrotron SESAME in Jordan. Members include nine states from the region and over 10 observers worldwide. SESAME was established a long the same philosophy behind building CERN.

77 FR 56209 - Notice of Agreements Filed

Science.gov (United States)

2012-09-12

... Yusen Kaisha Line; Orient Overseas Container Line Limited; and Yangming Marine Transport Corp. Filing... & Logistics GmbH & Co. KG; Beluga Chartering GmbH; Chipolbrok; Clipper Project Ltd.; Hyndai Merchant Marine Co...

77 FR 22560 - Lightweight Thermal Paper From Germany: Notice of Partial Rescission of Antidumping Duty...

Science.gov (United States)

2012-04-16

... organizational structure, Mitsubishi HiTec Paper Flensburg GmbH, and Mitsubishi HiTec Paper Bielefeld GmbH have... Mitsubishi. Therefore, we do not intend to issue liquidation instructions to U.S. Customs and Border...

75 FR 60478 - In the Matter of Certain Machine Vision Software, Machine Vision Systems, and Products Containing...

Science.gov (United States)

2010-09-30

... (``ID'') of the presiding administrative law judge (``ALJ'') finding no violation of section 337 of the..., Virginia; Rasco GmbH (``Rasco'') of Germany; MVTec Software GmbH of Germany and MVTec LLC of Cambridge...

Nowcasting wind power for grid operation at RWE Transportnetz from Strom GmbH (RWE TSO)

International Nuclear Information System (INIS)

Ernst, B.; Vanzetta, J.

2008-01-01

This paper presented new methods of balancing power supply and demand for electricity systems that have a large share of wind power. Wind power forecasting plays a key role in integrating a large share of wind power into an electricity system, as it links the weather dependent production with the scheduled production of conventional power plants and the forecast of the electricity demand. Wind power forecasts are essential for grid operation. Since most European electricity markets focus on the day ahead market, wind balancing is also done the day ahead. A current trend is that the intra day markets are increasing in popularity and becoming more liquid. Therefore, nowcasting will play a vital role in improving wind power related economics because shorter timeframes are much easier and better to predict. Nowcasting uses actual measurements of weather and also considers power data. Many wind power prediction tools for day ahead forecasts are available. Most models have 3 common steps, notably numerical weather prediction, wind-to-power model and regional up-scaling. A comparison between recent measurements with the output of numerical weather models showed that nowcasting provides a forecast that outperforms a pure numerical weather forecast. The first results were very promising. All 3 nowcasting solutions were found to have their own unique advantages and limitations. Ongoing research will continue to improve wind power prediction. 2 refs., 3 figs

76 FR 33660 - Airworthiness Directives; Austro Engine GmbH Model E4 Diesel Piston Engines

Science.gov (United States)

2011-06-09

... Model E4 Diesel Piston Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of... pressure supply for excessive oscillations to determine if high-pressure fuel pumps have been exposed to damaging pressure oscillations. Pumps that have been exposed require replacement before further flight...

77 FR 17323 - Special Conditions: XtremeAir GmbH, XA42; Acrobatic Category Aerodynamic Stability

Science.gov (United States)

2012-03-26

... planform and is of composite construction. The engine is a Lycoming AEIO-580-B1A with a rated power of 315... can perform any of the maneuvers listed in the Aresti Catalog. Generally, the evolution of the... review and discussions with the manufacturer and civil aviation authorities. Discussion of Comments A...

76 FR 80829 - Special Conditions: XtremeAir GmbH, XA42; Acrobatic Category Aerodynamic Stability

Science.gov (United States)

2011-12-27

... gear, conventional low-wing planform and is of composite construction. The engine is a Lycoming AEIO.... Generally, the evolution of the ``unlimited'' types of acrobatic airplanes, with very low mass, exceptional... further FAA review and discussions with the manufacturer and civil aviation authorities. Applicability As...

20 percent more yield; 20 Prozent mehr Ertrag

Energy Technology Data Exchange (ETDEWEB)

Anon.

2013-06-15

Interview with Tino Weber, director of Schmack Biogas GmbH, about the opportunities and prospects of bioenergy use by new concepts. [German] Interview mit Tino Weber, Geschaeftsfuehrer der Schmack Biogas GmbH, ueber Chancen und Perspektiven der Bioenergie durch neue Nutzungskonzepte.

IEK-3 report 2011. Climate-relevant energy research

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

IEK-3 is one of nine sub-institutes within the Institute of Energy and Climate Research at Forschungszentrum Juelich GmbH. IEK-3 aims to conduct research of social, ecological and economic relevance and thus generate groundbreaking results on an international level. This quality of work is achieved through basic research in close coordination with technical development work in relevant scientific and technical fields of expertise. Special significance is attached here to international cooperations with partners from research and industry. By implementing research results in innovative products, procedures and processes in cooperation with industry, IEK-3 hopes to help bridge the gap between science and technology. Cooperation with universities, universities of applied sciences, training departments and training centers is designed to promote opportunities for further education and training. With a staff of approximately 100, IEK-3 concentrates on the basic topics of electrochemistry and process engineering for fuel cells. In an integrated approach, the four key areas worked on in the institute - direct methanol fuel cells, high-temperature polymer electrolyte fuel cells, solid oxide fuel cells and fuel processing systems - are accompanied by systems analysis and theoretical investigations, basic modeling and simulations, and by experimental and theoretical systems evaluations. The information generated in these areas is used to design and verify functional systems. In addition, particular attention is given to the development, configuration and application of special measuring techniques for the structural analysis of membrane electrode assemblies, for flow simulation and visualization, and for the characterization of stacks. The solid oxide fuel cell (SOFC) stack pictured comprises 36 cells, each with an active cell area of 360 cm{sup 2}. The nominal power at a mean cell voltage of 800 mV is approximately 5.5 kW. The stack is operated on natural gas, which is

Rotary-Wing Brownout Mitigation: Technologies and Training (Remedes contre le phenomene de brownout sur les appareils a voilure tournante: Technologies et entrainement)

Science.gov (United States)

2012-01-01

thorstenwernereger@bundeswehr.org Mr. Peter KIELHORN EADS Deutschland GmbH P.O. Box 88039 Friedrichshafen E-mail: peter.kielhorn...Deutschland GmbH P.O. Box 88039 Friedrichshafen E-mail: thomas.muensterer@cassidian.com ISRAEL Mr. Ofer KLEIN Elbit Systems Aerospace Adv. Tech

77 FR 17105 - Commercial Driver's License (CDL) Standards; Rotel North American Tours, LLC; Application for...

Science.gov (United States)

2012-03-23

... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration [Docket No. FMCSA-2008... Renewal of Exemption; Correction AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION..., Rotel Tours, Das Rollende Hotel, through Georg Hoeltl GmBh & Co.Kg, Tittling, or George Hoeltl GmbH...

76 FR 24523 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ODVA, Inc.

Science.gov (United States)

2011-05-02

...; Tyco Electronics Corporation, Berwyn, PA; Rosemount Inc., Chanhassen, MN; Sencon Incorporated, Bedford...., Gloucestershire, UNITED KINGDOM; TOKYO TRON CO., LTD.; TOKYO TRON CO., LTD., Tokyo-to, JAPAN; Alpha Wire.... In addition, the following members have changed their names: Moeller GmbH to Eaton Industries GmbH...

78 FR 57104 - Airworthiness Directives; Diamond Aircraft Industries Airplanes

Science.gov (United States)

2013-09-17

... p.m., Monday through Friday, except Federal holidays. For service information identified in this... AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued Mandatory Service... service information related to this AD, contact Diamond Aircraft Industries GmbH, N.A. Otto-Str.5, A-2700...

76 FR 48047 - Airworthiness Directives; Diamond Aircraft Industries Powered Sailplanes

Science.gov (United States)

2011-08-08

... 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this... Service Information Diamond Aircraft Industries GmbH has issued Service Bulletin No. MSB 36-105/1, dated...-105, dated April 21, 2011, as specified in Diamond Aircraft Industries GmbH Service Bulletin No. MSB...

A Review of Selected International Aircraft Spares Pooling Programs: Lessons Learned for F-35 Spares Pooling

Science.gov (United States)

2016-01-01

Applications Global Marketing Brochure, Eurofighter GmbH Case Study, September 2006. 39 The NAO is equivalent to the U.S. Government Accountability Office...www.publications.parliament.uk/pa/cm201011/cmselect/cmpubacc/860/860we01.htm IFS, IFS Applications Global Marketing Brochure, Eurofighter GmbH Case Study

LYSO crystal testing for an EDM polarimeter

Science.gov (United States)

Müller, F.; Keshelashvili, I.; Mchedlishvili, D.; JEDI Collaboration

2017-11-01

Four detector modules, built from three different LYSO crystals and two different types of light sensors (PMTs and SiPM arrays), have been tested with a deuteron beam from 100 MeV - 270 MeV at the COSY accelerator facility for the srEDM project at the Forschungszentrum Jülich in Germany. The detector modules were arranged in a cluster hand mounted on a positioning table. The deuteron beam was targeted at the center of each individual crystal for data analysis. The signals were digitized using a 14 bit, 250 MS/s flash ADC. Further, the energy spectra were calibrated using the known beam energies from the accelerator. From the calibrated spectra, the energy resolution was calculated. A resolution of 3% for the low energies and down to 1% for the high energy of 270 MeV was achieved. A deuteron reconstruction efficiency of almost 100% for low energies and around 70% for high energies was achieved. The SiPM light sensor showed a very good performance and will be used for the next generation of detector modules.

The control system of the polarized internal target of ANKE at COSY

Energy Technology Data Exchange (ETDEWEB)

Kleines, H. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Sarkadi, J. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Zwoll, K. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Engels, R. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Grigoryev, K. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Mikirtychyants, M. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Nekipelov, M. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Rathmann, F. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Seyfarth, H. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany)]. E-mail: h.seyfarth@fz-juelich.de; Kravtsov, P. [St. Petersburg Nuclear Physics Institute, 188350 Gatchina (Russian Federation); Vasilyev, A. [St. Petersburg Nuclear Physics Institute, 188350 Gatchina (Russian Federation)

2006-05-10

The polarized internal target for the ANKE experiment at the Cooler Synchrotron COSY of the Forschungszentrum Juelich utilizes a polarized atomic beam source to feed a storage cell with polarized hydrogen or deuterium atoms. The nuclear polarization is measured with a Lamb-shift polarimeter. For common control of the two systems, industrial equipment was selected providing reliable, long-term support and remote control of the target as well as measurement and optimization of its operating parameters. The interlock system has been implemented on the basis of SIEMENS SIMATIC S7-300 family of programmable logic controllers. In order to unify the interfacing to the control computer, all front-end equipment is connected via the PROFIBUS DP fieldbus. The process control software was implemented using the Windows-based WinCC toolkit from SIEMENS. The variety of components, to be controlled, and the logical structure of the control and interlock system are described. Finally, a number of applications derived from the present development to other, new installations are briefly mentioned.

The control system of the polarized internal target of ANKE at COSY

Science.gov (United States)

Kleines, H.; Sarkadi, J.; Zwoll, K.; Engels, R.; Grigoryev, K.; Mikirtychyants, M.; Nekipelov, M.; Rathmann, F.; Seyfarth, H.; Kravtsov, P.; Vasilyev, A.

2006-05-01

The polarized internal target for the ANKE experiment at the Cooler Synchrotron COSY of the Forschungszentrum Jülich utilizes a polarized atomic beam source to feed a storage cell with polarized hydrogen or deuterium atoms. The nuclear polarization is measured with a Lamb-shift polarimeter. For common control of the two systems, industrial equipment was selected providing reliable, long-term support and remote control of the target as well as measurement and optimization of its operating parameters. The interlock system has been implemented on the basis of SIEMENS SIMATIC S7-300 family of programmable logic controllers. In order to unify the interfacing to the control computer, all front-end equipment is connected via the PROFIBUS DP fieldbus. The process control software was implemented using the Windows-based WinCC toolkit from SIEMENS. The variety of components, to be controlled, and the logical structure of the control and interlock system are described. Finally, a number of applications derived from the present development to other, new installations are briefly mentioned.

Barrel time-of-flight detector for the PANDA experiment at FAIR

Science.gov (United States)

Gruber, L.; Brunner, S. E.; Marton, J.; Orth, H.; Suzuki, K.; PANDA Tof Group

2016-07-01

The barrel time-of-flight detector for the PANDA experiment at FAIR is foreseen as a Scintillator Tile (SciTil) Hodoscope based on several thousand small plastic scintillator tiles read-out with directly attached Silicon Photomultipliers (SiPMs). The main tasks of the system are an accurate determination of the time origin of particle tracks to avoid event mixing at high collision rates, relative time-of-flight measurements as well as particle identification in the low momentum regime. The main requirements are the use of a minimum material amount and a time resolution of σ < 100 ps. We have performed extensive optimization studies and prototype tests to prove the feasibility of the SciTil design and finalize the R&D phase. In a 2.7 GeV/c proton beam at Forschungszentrum Jülich a time resolution of about 80 ps has been achieved using SiPMs from KETEK and Hamamatsu with an active area of 3 × 3mm2. Employing the Digital Photon Counter from Philips a time resolution of about 30 ps has been reached.

Main activities and objectives of VKTA Rossendorf

International Nuclear Information System (INIS)

Hieronymus, W.

1996-01-01

The Rossendorf Central Institute for Nuclear Research of the Academy of Science of the German Democratic Republic was disbanded on December 31, 1991. The existing nuclear installations, part of the real estate, and the personnel required to ensure nuclear safety and radiological protection were transferred to an institution of the Free State of Saxony, the Rossendorf Association for Nuclear Process Technology and Analysis (Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V., VKTA). In connection with decommissioning the nuclear installations currently shut down, securing the extensive inventories of nuclear materials, managing existing radioactive waste in Rossendorf, and excercising duties in radiological protection and in nuclear licensing VKTA has functions extending beyond the Rossendorf premises. In this way, it also relieves the Rossendorf Research Center (Forschungszentrum Rossendorf e.V., FZR), which was established on the same research site at the same time and is financed 50% by the Federal Government, of all obligations in this respect. VKTA also holds a number of official functions on behalf of the Free State of Saxony, and it makes its comprehensive know-how available to third parties. (orig.) [de

Reactive flow simulation in complex 3D geometries using the COM3D code

International Nuclear Information System (INIS)

Breitung, W.; Kotchourko, A.; Veser, A.; Scholtyssek, W.

1999-01-01

The COM3D code, under development at the Forschungszentrum Karlsruhe (FZK), is a 3-d CFD code to describe turbulent combustion phenomena in complex geometries. It is intended to be part of the advanced integral code system for containment analysis (INCA) which includes in addition GASFLOW for distribution calculations, V3D for slow combustion and DET3D for detonation analysis. COM3D uses a TVD-solver and optional models for turbulence, chemistry and thermodynamics. The hydrodynamic model considers mass, momentum and energy conservation. Advanced procedures were provided to facilitate grid-development for complex 3-d structures. COM3D was validated on experiments performed on different scales with generally good agreement for important physical quantities. The code was applied to combustion analysis of a large PWR. The initial conditions were obtained from a GASFLOW distribution analysis for a LOOP scenario. Results are presented concerning flame propagation and pressure evolution in the containment which clearly demonstrate the effects of internal structures, their influence on turbulence formation and consequences for local loads. (author)

Analysis of a thermite experiment to study low pressure corium dispersion

International Nuclear Information System (INIS)

Wilhelm, D.

2001-08-01

The report describes the recalculation of a thermite experiment in a reduced scale which simulates the discharge of molten core materials out of the pressure vessel of a light water reactor into the open compartments and the dome of the containment. The experiment was performed in the framework of a multinational effort at the Sandia National Laboratory, U.S.A. It is being followed by the DISCO program at the Forschungszentrum Karlsruhe. A computational fluid dynamics code was supplemented with specific models to recalculate the Sandia experiment in order to identify problem areas which need to be addressed in the future. Therefore, a first attempt was undertaken to extrapolate to reactor conditions. This was done in two steps to separate geometric from material scaling relationships. The study shows that important experimental results can be extrapolated according to general scaling laws but that there are sensitivities, especially when replacing thermite by corium. The results show a considerable scatter and a dependence on geometric resolution and dynamics of energy transfer between participating components. (orig.) [de

CERMET fuel behavior and properties in ADS reactors

International Nuclear Information System (INIS)

Haas, D.; Fernandez, A.; Staicu, D.; Somers, J.; Maschek, W.; Liu, P.; Chen, X.

2008-01-01

Within the EUROTRANS Integrated Project, Forschungszentrum Karlsruhe (FZK) and the Institute for Transuranium Elements (ITU) are joining their efforts to study the behavior of Mo-based CERMET non-uranium fuel for the ADS. Contributions include core safety calculations, and fuel property measurements and irradiation experiments. Safety studies for optimized EFIT core designs have concluded that, for the new low power cores of EFIT with a power class of ∼400 MWth and a fuel power density of ∼250 MW/m 3 , the CERMET-loaded cores behave favorably and the design limits of the fuels were not violated. Mo-based CERMET fuel pellets and pins loaded with Pu and Am were fabricated for irradiation programmes which will start by mid-2007 in PHENIX (France) and HFR-Petten (The Netherlands). The thermal diffusivity and specific heat of the CERMET fuels (loaded with Pu and Am) were the main properties measured, and the thermal conductivity was deduced. The results were used to prepare the safety report for the irradiation experiments

Program nuclear safety research: report 2000

International Nuclear Information System (INIS)

Muehl, B.

2001-09-01

The reactor safety R and D work of forschungszentrum karlsruhe (FZK) had been part of the nuclear safety research project (PSF) since 1990. In 2000, a new organisational structure was introduced and the Nuclear Safety Research Project was transferred into the nuclear safety research programme (NUKLEAR). In addition to the three traditional main topics - Light Water Reactor safety, Innovative systems, Studies related to the transmutation of actinides -, the new Programme NUKLEAR also covers Safety research related to final waste storage and Immobilisation of HAW. These new topics, however, will only be dealt with in the next annual report. Some tasks related to the traditional topics have been concluded and do no longer appear in the annual report; other tasks are new and are described for the first time. Numerous institutes of the research centre contribute to the work programme, as well as several external partners. The tasks are coordinated in agreement with internal and external working groups. The contributions to this report, which are either written in German or in English, correspond to the status of early/mid 2001. (orig.)