[Health Risk Assessment of Drinking Water Quality in Tianjin Based on GIS].

Science.gov (United States)

Fu, Gang; Zeng, Qiang; Zhao, Liang; Zhang, Yue; Feng, Bao-jia; Wang, Rui; Zhang, Lei; Wang, Yang; Hou, Chang-chun

2015-12-01

This study intends to assess the potential health hazards of drinking water quality and explore the application of geographic information system( GIS) in drinking water safety in Tianjin. Eight hundred and fifty water samples from 401 sampling points in Tianjin were measured according to the national drinking water standards. The risk assessment was conducted using the environmental health risk assessment model recommended by US EAP, and GIS was combined to explore the information visualization and risk factors simultaneously. The results showed that the health risks of carcinogens, non-carcinogens were 3.83 x 10⁻⁵, 5.62 x 10⁻⁹ and 3.83 x 10⁻⁵ for total health risk respectively. The rank of health risk was carcinogen > non-carcinogen. The rank of carcinogens health risk was urban > new area > rural area, chromium (VI) > cadmium > arsenic > trichlormethane > carbon tetrachloride. The rank of non-carcinogens health risk was rural area > new area > urban, fluoride > cyanide > lead > nitrate. The total health risk level of drinking water in Tianjin was lower than that of ICRP recommended level (5.0 x 10⁻⁵), while was between US EPA recommended level (1.0 x 10⁻⁴-1.0 x 10⁻⁶). It was at an acceptable level and would not cause obvious health hazards. The main health risks of drinking water came from carcinogens. More attentions should be paid to chromium (VI) for carcinogens and fluoride for non-carcinogens. GIS can accomplish information visualization of drinking water risk assessment and further explore of risk factors.

Creating and validating GIS measures of urban design for health research.

Science.gov (United States)

Purciel, Marnie; Neckerman, Kathryn M; Lovasi, Gina S; Quinn, James W; Weiss, Christopher; Bader, Michael D M; Ewing, Reid; Rundle, Andrew

2009-12-01

Studies relating urban design to health have been impeded by the unfeasibility of conducting field observations across large areas and the lack of validated objective measures of urban design. This study describes measures for five dimensions of urban design - imageability, enclosure, human scale, transparency, and complexity - created using public geographic information systems (GIS) data from the US Census and city and state government. GIS measures were validated for a sample of 588 New York City block faces using a well-documented field observation protocol. Correlations between GIS and observed measures ranged from 0.28 to 0.89. Results show valid urban design measures can be constructed from digital sources.

Cloud GIS Based Watershed Management

Science.gov (United States)

Bediroğlu, G.; Colak, H. E.

2017-11-01

In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

Putting Chronic Disease on the Map: Building GIS Capacity in State and Local Health Departments

Science.gov (United States)

Casper, Michele; Tootoo, Joshua; Schieb, Linda

2013-01-01

Techniques based on geographic information systems (GIS) have been widely adopted and applied in the fields of infectious disease and environmental epidemiology; their use in chronic disease programs is relatively new. The Centers for Disease Control and Prevention’s Division for Heart Disease and Stroke Prevention is collaborating with the National Association of Chronic Disease Directors and the University of Michigan to provide health departments with capacity to integrate GIS into daily operations, which support priorities for surveillance and prevention of chronic diseases. So far, 19 state and 7 local health departments participated in this project. On the basis of these participants’ experiences, we describe our training strategy and identify high-impact GIS skills that can be mastered and applied over a short time in support of chronic disease surveillance. We also describe the web-based resources in the Chronic Disease GIS Exchange that were produced on the basis of this training and are available to anyone interested in GIS and chronic disease (www.cdc.gov/DHDSP/maps/GISX). GIS offers diverse sets of tools that promise increased productivity for chronic disease staff of state and local health departments. PMID:23786907

Putting chronic disease on the map: building GIS capacity in state and local health departments.

Science.gov (United States)

Miranda, Marie Lynn; Casper, Michele; Tootoo, Joshua; Schieb, Linda

2013-06-20

Techniques based on geographic information systems (GIS) have been widely adopted and applied in the fields of infectious disease and environmental epidemiology; their use in chronic disease programs is relatively new. The Centers for Disease Control and Prevention's Division for Heart Disease and Stroke Prevention is collaborating with the National Association of Chronic Disease Directors and the University of Michigan to provide health departments with capacity to integrate GIS into daily operations, which support priorities for surveillance and prevention of chronic diseases. So far, 19 state and 7 local health departments participated in this project. On the basis of these participants' experiences, we describe our training strategy and identify high-impact GIS skills that can be mastered and applied over a short time in support of chronic disease surveillance. We also describe the web-based resources in the Chronic Disease GIS Exchange that were produced on the basis of this training and are available to anyone interested in GIS and chronic disease (www.cdc.gov/DHDSP/maps/GISX). GIS offers diverse sets of tools that promise increased productivity for chronic disease staff of state and local health departments.

GIS and Public Health

Directory of Open Access Journals (Sweden)

Stefania Bertazzon

2014-06-01

Full Text Available This Special Issue on GIS and public health is the result of a highly selective process, which saw the participation of some 20 expert peer-reviewers and led to the acceptance of one half of the high-quality submissions received over the past year. Many threads link these papers to each other and, indeed, to our original call for papers, but the element that most clearly emerges from these works is the inextricable connection between public health and the environment. Indeed, GIS analysis of public health simply cannot disregard the geospatial dimension of environmental resources and risks. What consistently emerges from these analyses is that current geospatial research can only scratch the surface of the complex interactions of spatial resources, risks, and public health. In today’s world, or at least in the developed world, researchers and practitioners can count on virtually endless data, on inexpensive computational power, and on seamless connectivity. In this research environment, these papers point to the need for improved analytical tools, covering concepts, representation, modeling and reliability. These works are important contributions that help us to identify what advances in geospatial analysis can better address the complex interactions of public health with our physical and cultural environment, and bridge research and practice, so that geospatial analyses can inform public health policy making. [...

Using GIS Mapping to Target Public Health Interventions: Examining Birth Outcomes Across GIS Techniques.

Science.gov (United States)

MacQuillan, E L; Curtis, A B; Baker, K M; Paul, R; Back, Y O

2017-08-01

With advances in spatial analysis techniques, there has been a trend in recent public health research to assess the contribution of area-level factors to health disparity for a number of outcomes, including births. Although it is widely accepted that health disparity is best addressed by targeted, evidence-based and data-driven community efforts, and despite national and local focus in the U.S. to reduce infant mortality and improve maternal-child health, there is little work exploring how choice of scale and specific GIS visualization technique may alter the perception of analyses focused on health disparity in birth outcomes. Retrospective cohort study. Spatial analysis of individual-level vital records data for low birthweight and preterm births born to black women from 2007 to 2012 in one mid-sized Midwest city using different geographic information systems (GIS) visualization techniques [geocoded address records were aggregated at two levels of scale and additionally mapped using kernel density estimation (KDE)]. GIS analyses in this study support our hypothesis that choice of geographic scale (neighborhood or census tract) for aggregated birth data can alter programmatic decision-making. Results indicate that the relative merits of aggregated visualization or the use of KDE technique depend on the scale of intervention. The KDE map proved useful in targeting specific areas for interventions in cities with smaller populations and larger census tracts, where they allow for greater specificity in identifying intervention areas. When public health programmers seek to inform intervention placement in highly populated areas, however, aggregated data at the census tract level may be preferred, since it requires lower investments in terms of time and cartographic skill and, unlike neighborhood, census tracts are standardized in that they become smaller as the population density of an area increases.

Development of a GIS-Based Decision Support System for Diagnosis of River System Health and Restoration

Directory of Open Access Journals (Sweden)

Jihong Xia

2014-10-01

Full Text Available The development of a decision support system (DSS to inform policy making has been progressing rapidly. This paper presents a generic framework and the development steps of a decision tool prototype of geographic information systems (GIS-based decision support system of river health diagnosis (RHD-DSS. This system integrates data, calculation models, and human knowledge of river health status assessment, causal factors diagnosis, and restoration decision making to assist decision makers during river restoration and management in Zhejiang Province, China. Our RHD-DSS is composed of four main elements: the graphical user interface (GUI, the database, the model base, and the knowledge base. It has five functional components: the input module, the database management, the diagnostic indicators management, the assessment and diagnosis, and the visual result module. The system design is illustrated with particular emphasis on the development of the database, model schemas, diagnosis and analytical processing techniques, and map management design. Finally, the application of the prototype RHD-DSS is presented and implemented for Xinjiangtang River of Haining County in Zhejiang Province, China. This case study is used to demonstrate the advantages gained by the application of this system. We conclude that there is great potential for using the RHD-DSS to systematically manage river basins in order to effectively mitigate environmental issues. The proposed approach will provide river managers and designers with improved insight into river degradation conditions, thereby strengthening the assessment process and the administration of human activities in river management.

Using geographic information systems (GIS) to identify communities in need of health insurance outreach: An OCHIN practice-based research network (PBRN) report.

Science.gov (United States)

Angier, Heather; Likumahuwa, Sonja; Finnegan, Sean; Vakarcs, Trisha; Nelson, Christine; Bazemore, Andrew; Carrozza, Mark; DeVoe, Jennifer E

2014-01-01

Our practice-based research network (PBRN) is conducting an outreach intervention to increase health insurance coverage for patients seen in the network. To assist with outreach site selection, we sought an understandable way to use electronic health record (EHR) data to locate uninsured patients. Health insurance information was displayed within a web-based mapping platform to demonstrate the feasibility of using geographic information systems (GIS) to visualize EHR data. This study used EHR data from 52 clinics in the OCHIN PBRN. We included cross-sectional coverage data for patients aged 0 to 64 years with at least 1 visit to a study clinic during 2011 (n = 228,284). Our PBRN was successful in using GIS to identify intervention sites. Through use of the maps, we found geographic variation in insurance rates of patients seeking care in OCHIN PBRN clinics. Insurance rates also varied by age: The percentage of adults without insurance ranged from 13.2% to 86.8%; rates of children lacking insurance ranged from 1.1% to 71.7%. GIS also showed some areas of households with median incomes that had low insurance rates. EHR data can be imported into a web-based GIS mapping tool to visualize patient information. Using EHR data, we were able to observe smaller areas than could be seen using only publicly available data. Using this information, we identified appropriate OCHIN PBRN clinics for dissemination of an EHR-based insurance outreach intervention. GIS could also be used by clinics to visualize other patient-level characteristics to target clinic outreach efforts or interventions. © Copyright 2014 by the American Board of Family Medicine.

Application of GIS technology in public health: successes and challenges.

Science.gov (United States)

Fletcher-Lartey, Stephanie M; Caprarelli, Graziella

2016-04-01

The uptake and acceptance of Geographic Information Systems (GIS) technology has increased since the early 1990s and public health applications are rapidly expanding. In this paper, we summarize the common uses of GIS technology in the public health sector, emphasizing applications related to mapping and understanding of parasitic diseases. We also present some of the success stories, and discuss the challenges that still prevent a full scope application of GIS technology in the public health context. Geographical analysis has allowed researchers to interlink health, population and environmental data, thus enabling them to evaluate and quantify relationships between health-related variables and environmental risk factors at different geographical scales. The ability to access, share and utilize satellite and remote-sensing data has made possible even wider understanding of disease processes and of their links to the environment, an important consideration in the study of parasitic diseases. For example, disease prevention and control strategies resulting from investigations conducted in a GIS environment have been applied in many areas, particularly in Africa. However, there remain several challenges to a more widespread use of GIS technology, such as: limited access to GIS infrastructure, inadequate technical and analytical skills, and uneven data availability. Opportunities exist for international collaboration to address these limitations through knowledge sharing and governance.

Web-based GIS for spatial pattern detection: application to malaria incidence in Vietnam.

Science.gov (United States)

Bui, Thanh Quang; Pham, Hai Minh

2016-01-01

There is a great concern on how to build up an interoperable health information system of public health and health information technology within the development of public information and health surveillance programme. Technically, some major issues remain regarding to health data visualization, spatial processing of health data, health information dissemination, data sharing and the access of local communities to health information. In combination with GIS, we propose a technical framework for web-based health data visualization and spatial analysis. Data was collected from open map-servers and geocoded by open data kit package and data geocoding tools. The Web-based system is designed based on Open-source frameworks and libraries. The system provides Web-based analyst tool for pattern detection through three spatial tests: Nearest neighbour, K function, and Spatial Autocorrelation. The result is a web-based GIS, through which end users can detect disease patterns via selecting area, spatial test parameters and contribute to managers and decision makers. The end users can be health practitioners, educators, local communities, health sector authorities and decision makers. This web-based system allows for the improvement of health related services to public sector users as well as citizens in a secure manner. The combination of spatial statistics and web-based GIS can be a solution that helps empower health practitioners in direct and specific intersectional actions, thus provide for better analysis, control and decision-making.

IMPLEMENTATION OF GIS-BASED MULTICRITERIA DECISION ANALYSIS WITH VB IN ArcGIS

OpenAIRE

DERYA OZTURK; FATMAGUL BATUK

2011-01-01

This article focuses on the integration of multicriteria decision analysis (MCDA) and geographical information systems (GIS) and introduces a tool, GIS–MCDA, written in visual basic in ArcGIS for GIS-based MCDA. The GIS–MCDA deals with raster-based data sets and includes standardization, weighting and decision analysis methods, and sensitivity analysis. Simple additive weighting, weighted product method, technique for order preference by similarity to ideal solution, compromise programming, a...

Defining Primary Care Shortage Areas: Do GIS-based Measures Yield Different Results?

Science.gov (United States)

Daly, Michael R; Mellor, Jennifer M; Millones, Marco

2018-02-12

To examine whether geographic information systems (GIS)-based physician-to-population ratios (PPRs) yield determinations of geographic primary care shortage areas that differ from those based on bounded-area PPRs like those used in the Health Professional Shortage Area (HPSA) designation process. We used geocoded data on primary care physician (PCP) locations and census block population counts from 1 US state to construct 2 shortage area indicators. The first is a bounded-area shortage indicator defined without GIS methods; the second is a GIS-based measure that measures the populations' spatial proximity to PCP locations. We examined agreement and disagreement between bounded shortage areas and GIS-based shortage areas. Bounded shortage area indicators and GIS-based shortage area indicators agree for the census blocks where the vast majority of our study populations reside. Specifically, 95% and 98% of the populations in our full and urban samples, respectively, reside in census blocks where the 2 indicators agree. Although agreement is generally high in rural areas (ie, 87% of the rural population reside in census blocks where the 2 indicators agree), agreement is significantly lower compared to urban areas. One source of disagreement suggests that bounded-area measures may "overlook" some shortages in rural areas; however, other aspects of the HPSA designation process likely mitigate this concern. Another source of disagreement arises from the border-crossing problem, and it is more prevalent. The GIS-based PPRs we employed would yield shortage area determinations that are similar to those based on bounded-area PPRs defined for Primary Care Service Areas. Disagreement rates were lower than previous studies have found. © 2018 National Rural Health Association.

Validating the accuracy of GIS-based accessibility analysis in determining public primary health care demand in metropolitan areas: conference presentation

CSIR Research Space (South Africa)

Mokgalaka, H

2014-07-01

Full Text Available selected for the analysis are mainly those that offered public primary health care services and acted as first point of contact with the health service delivery system. Attached to the facility data are attribute data indicating the capacity...-Based Accessibility Analysis in Determining Public Primary Health Care Demand in Metropolitan Areas Hunadi Mokgalaka July 2014 Contents • Service access planning • GIS-based accessibility analysis • Key challenges to application • Methodology...

GIS, Pollution Prevention and Public Health

Science.gov (United States)

Using examples of preventing pollution and reducing risk of exposure to communities, this guide answers basic interest and start-up questions, addresses benefits and limitations and illustrates the value of GIS for local health departments.

Understanding the use of geographical information systems (GIS) in health informatics research: A review.

Science.gov (United States)

Shaw, Nicola; McGuire, Suzanne

2017-06-23

The purpose of this literature review is to understand geographical information systems (GIS) and how they can be applied to public health informatics, medical informatics, and epidemiology. Relevant papers that reflected the use of geographical information systems (GIS) in health research were identified from four academic databases: Academic Search Complete, BioMed Central, PubMed Central, and Scholars Portal, as well as Google Scholar. The search strategy used was to identify articles with "geographic information systems", "GIS", "public health", "medical informatics", "epidemiology", and "health geography" as main subject headings or text words in titles and abstracts. Papers published between 1997 and 2014 were considered and a total of 39 articles were included to inform the authors on the use of GIS technologies in health informatics research. The main applications of GIS in health informatics and epidemiology include disease surveillance, health risk analysis, health access and planning, and community health profiling. GIS technologies can significantly improve quality and efficiency in health research as substantial connections can be made between a population's health and their geographical location. Gains in health informatics can be made when GIS are applied through research, however, improvements need to occur in the quantity and quality of data input for these systems to ensure better geographical health maps are used so that proper conclusions between public health and environmental factors may be made.

GIS: A Spatial Turn in the Health Science?

DEFF Research Database (Denmark)

Schipperijn, Jasper; Ejstrud, Bo; Troelsen, Jens

2013-01-01

In recent years health science seems to have taken a “spatial turn” with a renewed interest in spatially oriented research. There are a number of reasons behind this rediscovery of “the power of maps”. One of the predominant drivers has been the development of Geographical Information Systems (GIS......), software systems that can handle geographically referenced data. GIS is a very helpful tool to characterise neighbourhoods for a wide range of health-related studies. However, neighbourhoods can be defined in many different ways, and modifying the area unit used to delineate a neighbourhood affects...

Exploring the role of GIS during community health assessment problem solving: experiences of public health professionals

Directory of Open Access Journals (Sweden)

Scotch Matthew

2006-09-01

Full Text Available Abstract Background A Community health assessment (CHA involves the use of Geographic Information Systems (GIS in conjunction with other software to analyze health and population data and perform numerical-spatial problem solving. There has been little research on identifying how public health professionals integrate this software during typical problem solving scenarios. A better understanding of this is needed to answer the "What" and the "How". The "What" identifies the specific software being used and the "How" explains the way they are integrated together during problem solving steps. This level of understanding will highlight the role of GIS utilization during problem solving and suggest to developers how GIS can be enhanced to better support data analysis during community health assessment. Results An online survey was developed to identify the information technology used during CHA analysis. The tasks were broken down into steps and for our analysis these steps were categorized by action: Data Management/Access, Data Navigation, Geographic Comparison, Detection of Spatial Boundaries, Spatial Modelling, and Ranking Analysis. 27 CHA professionals completed the survey, with the majority of participants (14 being from health departments. Statistical software (e.g. SPSS was the most popular software for all but one of the types of steps. For this step (detection of spatial boundaries, GIS was identified as the most popular technology. Conclusion Most CHA professionals indicated they use statistical software in conjunction with GIS. The statistical software appears to drive the analysis, while GIS is used primarily for simple spatial display (and not complex spatial analysis. This purpose of this survey was to thoroughly examine into the process of problem solving during community health assessment data analysis and to gauge how GIS is integrated with other software for this purpose. These findings suggest that GIS is used more for spatial

GIS-based health assessment of the marine ecosystem in Laizhou Bay, China.

Science.gov (United States)

Song, Debin; Gao, Zhiqiang; Zhang, Hua; Xu, Fuxiang; Zheng, Xiangyu; Ai, Jinquan; Hu, Xiaoke; Huang, Guopei; Zhang, Haibo

2017-12-15

According to 2014-2016 monitoring data, an assessment index system including water quality, depositional environment and ecosystem was built to evaluate the health statue of marine ecosystem in the Laizhou Bay using analytic hierarchy process (AHP) method. The results, spatialized in ArcGIS software, show: while the comprehensive ecological health index is 0.62, the ecological environmental quality in the Laizhou Bay is in a sub-healthy state; the unhealthy area is mainly concentrated in southwestern inshore region, and impacted by serious environmental problems, such as water eutrophication and heavy metal pollution; the northwestern and southeastern inshore regions are in a sub-healthy state, while the eastern inshore and northern areas are in the healthiest state. The land-based pollutants that discharge into the sea may be the leading factors that are causing ecological environment deterioration in the Laizhou Bay, and the reclamation work ongoing around the port has exacerbated the ecological risk. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Review and Framework for Categorizing Current Research and Development in Health Related Geographical Information Systems (GIS) Studies.

Science.gov (United States)

Lyseen, A K; Nøhr, C; Sørensen, E M; Gudes, O; Geraghty, E M; Shaw, N T; Bivona-Tellez, C

2014-08-15

The application of GIS in health science has increased over the last decade and new innovative application areas have emerged. This study reviews the literature and builds a framework to provide a conceptual overview of the domain, and to promote strategic planning for further research of GIS in health. The framework is based on literature from the library databases Scopus and Web of Science. The articles were identified based on keywords and initially selected for further study based on titles and abstracts. A grounded theory-inspired method was applied to categorize the selected articles in main focus areas. Subsequent frequency analysis was performed on the identified articles in areas of infectious and non-infectious diseases and continent of origin. A total of 865 articles were included. Four conceptual domains within GIS in health sciences comprise the framework: spatial analysis of disease, spatial analysis of health service planning, public health, health technologies and tools. Frequency analysis by disease status and location show that malaria and schistosomiasis are the most commonly analyzed infectious diseases where cancer and asthma are the most frequently analyzed non-infectious diseases. Across categories, articles from North America predominate, and in the category of spatial analysis of diseases an equal number of studies concern Asia. Spatial analysis of diseases and health service planning are well-established research areas. The development of future technologies and new application areas for GIS and data-gathering technologies such as GPS, smartphones, remote sensing etc. will be nudging the research in GIS and health.

A Review and Framework for Categorizing Current Research and Development in Health Related Geographical Information Systems (GIS) Studies

Science.gov (United States)

Nøhr, C.; Sørensen, E. M.; Gudes, O.; Geraghty, E. M.; Shaw, N. T.; Bivona-Tellez, C.

2014-01-01

Summary Objectives The application of GIS in health science has increased over the last decade and new innovative application areas have emerged. This study reviews the literature and builds a framework to provide a conceptual overview of the domain, and to promote strategic planning for further research of GIS in health. Method The framework is based on literature from the library databases Scopus and Web of Science. The articles were identified based on keywords and initially selected for further study based on titles and abstracts. A grounded theory-inspired method was applied to categorize the selected articles in main focus areas. Subsequent frequency analysis was performed on the identified articles in areas of infectious and non-infectious diseases and continent of origin. Results A total of 865 articles were included. Four conceptual domains within GIS in health sciences comprise the framework: spatial analysis of disease, spatial analysis of health service planning, public health, health technologies and tools. Frequency analysis by disease status and location show that malaria and schistosomiasis are the most commonly analyzed infectious diseases where cancer and asthma are the most frequently analyzed non-infectious diseases. Across categories, articles from North America predominate, and in the category of spatial analysis of diseases an equal number of studies concern Asia. Conclusion Spatial analysis of diseases and health service planning are well-established research areas. The development of future technologies and new application areas for GIS and data-gathering technologies such as GPS, smartphones, remote sensing etc. will be nudging the research in GIS and health. PMID:25123730

GIS for Health and the Environment | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

The book also demonstrates how GIS can provide health researchers, ... Director (Tropical Diseases) for the Environmental Health Project in Arlington, VA, USA. ... IDRC congratulates first cohort of Women in Climate Change Science Fellows.

Format conversion between CAD data and GIS data based on ArcGIS

Science.gov (United States)

Xie, Qingqing; Wei, Bo; Zhang, Kailin; Wang, Zhichao

2015-12-01

To make full use of the data resources and realize a sharing for the different types of data in different industries, a method of format conversion between CAD data and GIS data based on ArcGIS was proposed. To keep the integrity of the converted data, some key steps to process CAD data before conversion were made in AutoCAD. For examples, deleting unnecessary elements such as title, border and legend avoided the appearance of unnecessary elements after conversion, as layering data again by a national standard avoided the different types of elements to appear in a same layer after conversion. In ArcGIS, converting CAD data to GIS data was executed by the correspondence of graphic element classification between AutoCAD and ArcGIS. In addition, an empty geographic database and feature set was required to create in ArcGIS for storing the text data of CAD data. The experimental results show that the proposed method avoids a large amount of editing work in data conversion and maintains the integrity of spatial data and attribute data between before and after conversion.

Use of GIS Mapping as a Public Health Tool–-From Cholera to Cancer

Directory of Open Access Journals (Sweden)

George J. Musa

2013-01-01

Full Text Available The field of medical geographic information systems (Medical GIS has become extremely useful in understanding the bigger picture of public health. The discipline holds a substantial capacity to understand not only differences, but also similarities in population health all over the world. The main goal of marrying the disciplines of medical geography, public health and informatics is to understand how countless health issues impact populations, and the trends by which these populations are affected. From the 1990s to today, this practical approach has become a valued and progressive system in analyzing medical and epidemiological phenomena ranging from cholera to cancer. The instruments supporting this field include geographic information systems (GIS, disease surveillance, big data, and analytical approaches like the Geographical Analysis Machine (GAM, Dynamic Continuous Area Space Time Analysis (DYCAST, cellular automata, agent-based modeling, spatial statistics and self-organizing maps. The positive effects on disease mapping have proven to be tremendous as these instruments continue to have a great impact on the mission to improve worldwide health care. While traditional uses of GIS in public health are static and lacking real-time components, implementing a space-time animation in these instruments will be monumental as technology and data continue to grow.

Use of GIS Mapping as a Public Health Tool-From Cholera to Cancer.

Science.gov (United States)

Musa, George J; Chiang, Po-Huang; Sylk, Tyler; Bavley, Rachel; Keating, William; Lakew, Bereketab; Tsou, Hui-Chen; Hoven, Christina W

2013-01-01

The field of medical geographic information systems (Medical GIS) has become extremely useful in understanding the bigger picture of public health. The discipline holds a substantial capacity to understand not only differences, but also similarities in population health all over the world. The main goal of marrying the disciplines of medical geography, public health and informatics is to understand how countless health issues impact populations, and the trends by which these populations are affected. From the 1990s to today, this practical approach has become a valued and progressive system in analyzing medical and epidemiological phenomena ranging from cholera to cancer. The instruments supporting this field include geographic information systems (GIS), disease surveillance, big data, and analytical approaches like the Geographical Analysis Machine (GAM), Dynamic Continuous Area Space Time Analysis (DYCAST), cellular automata, agent-based modeling, spatial statistics and self-organizing maps. The positive effects on disease mapping have proven to be tremendous as these instruments continue to have a great impact on the mission to improve worldwide health care. While traditional uses of GIS in public health are static and lacking real-time components, implementing a space-time animation in these instruments will be monumental as technology and data continue to grow.

Free and simple GIS as appropriate for health mapping in a low resource setting: a case study in eastern Indonesia.

Science.gov (United States)

Fisher, Rohan P; Myers, Bronwyn A

2011-02-25

Despite the demonstrated utility of GIS for health applications, there are perceived problems in low resource settings: GIS software can be expensive and complex; input data are often of low quality. This study aimed to test the appropriateness of new, inexpensive and simple GIS tools in poorly resourced areas of a developing country. GIS applications were trialled in pilot studies based on mapping of health resources and health indicators at the clinic and district level in the predominantly rural province of Nusa Tenggara Timur in eastern Indonesia. The pilot applications were (i) rapid field collection of health infrastructure data using a GPS enabled PDA, (ii) mapping health indicator data using open source GIS software, and (iii) service availability mapping using a free modelling tool. Through contextualised training, district and clinic staff acquired skills in spatial analysis and visualisation and, six months after the pilot studies, they were using these skills for advocacy in the planning process, to inform the allocation of some health resources, and to evaluate some public health initiatives. We demonstrated that GIS can be a useful and inexpensive tool for the decentralisation of health data analysis to low resource settings through the use of free and simple software, locally relevant training materials and by providing data collection tools to ensure data reliability.

[Wetland landscape pattern change based on GIS and RS: a review].

Science.gov (United States)

Kong, Fan-Ting; Xi, Min; Li, Yue; Kong, Fan-Long; Chen, Wan

2013-04-01

Wetland is an ecological landscape with most biodiversity in nature, which has unique ecological structure and function, and contains abundant natural resources to provide material guarantee for human's living and development. Wetland landscape pattern is the comprehensive result of various ecological processes, and has become a hot issue in wetland ecological study. At present, the combination of geographic information system (GIS) and remote sensing (RS) technologies is an important way to study the wetland landscape pattern change. This paper reviewed the research progress in the wetland landscape change based on GIS and RS from the aspects of the research methods of wetland landscape pattern, index of wetland landscape pattern, and driving forces of wetland landscape pattern evolution, and discussed the applications of the combination of GIS and RS in monitoring the wetland landscape pattern change, the index selection of wetland landscape pattern, and the driving mechanisms of the combined action of human and nature. Some deficiencies in the current studies were put forward, and the directions of the future-studies were prospected.

GIS In-Service Teacher Training Based on TPACK

Science.gov (United States)

Hong, Jung Eun; Stonier, Francis

2015-01-01

This article introduces the geographic information systems (GIS) in-service teacher training, focusing on the intersection of technological, pedagogical, and content knowledge (TPACK) for successful implementation of GIS in the classroom. Eleven social studies teachers in Georgia learned GIS technologies, inquiry-based learning, and social studies…

Moving NASA Remote Sensing Data to the GIS Environment for Health Studies

Science.gov (United States)

Vicente, Gilberto A.; Maynard, Nancy G.

2003-01-01

There has been an increasing demand by the health community for improved data on many different environmental factors relevant to the links between the environment and disease occurrence and transmission. These data are important for GIS-based monitoring, risk mapping, and surveillance of epidemiological parameters on a large number of different spatial, temporal, and spectral resolutions. Accordingly, NASA is developing new approaches to data collection and distribution in order to improve access to multiple sources of data streams to increase spatial and temporal coverage. Methods are being developed to incorporate different, scalable capabilities to handle multiple data sources by adding, deleting and replacing components as required as well as associated tools for their management. An approach has been to search for innovative solutions focused on the creation, use and manipulation of data stored in many different archives. These include data transformation and combination as well as data and information tools that can assist the public health and science community to use existing and anticipated products in new and flexible ways. This presentation will provide an inventory of geophysical parameters derived from satellite remote sensing sensors that are useful for GIS-based public health studies. The presentation will also discuss the physical and scientific limitations of access to and use of these data for health applications such as resolution and format differences, lack of software interoperability, data access problems. Finally, there will be a summary of the recent steps the NASA program has taken to bring NASA-generated satellite products to a wider range of users in the GIS community.

Developing Library GIS Services for Humanities and Social Science: An Action Research Approach

Science.gov (United States)

Kong, Ningning; Fosmire, Michael; Branch, Benjamin Dewayne

2017-01-01

In the academic libraries' efforts to support digital humanities and social science, GIS service plays an important role. However, there is no general service model existing about how libraries can develop GIS services to best engage with digital humanities and social science. In this study, we adopted the action research method to develop and…

Computer-based instrumentation for partial discharge detection in GIS

International Nuclear Information System (INIS)

Md Enamul Haque; Ahmad Darus; Yaacob, M.M.; Halil Hussain; Feroz Ahmed

2000-01-01

Partial discharge is one of the prominent indicators of defects and insulation degradation in a Gas Insulated Switchgear (GIS). Partial discharges (PD) have a harmful effect on the life of insulation of high voltage equipment. The PD detection using acoustic technique and subsequent analysis is currently an efficient method of performing non-destructive testing of GIS apparatus. A low cost PC-based acoustic PD detection instrument has been developed for the non-destructive diagnosis of GIS. This paper describes the development of a PC-based instrumentation system for partial discharge detection in GIS and some experimental results have also presented. (Author)

Evaluation of SOVAT: an OLAP-GIS decision support system for community health assessment data analysis.

Science.gov (United States)

Scotch, Matthew; Parmanto, Bambang; Monaco, Valerie

2008-06-09

Data analysis in community health assessment (CHA) involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS) enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture.On-Line Analytical Processing (OLAP) is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT) currently used by many public health professionals. SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS"). Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (alpha = .01) from SPSS-GIS for satisfaction and time (p OLAP-GIS decision support systems as a valuable tool for CHA data analysis.

Role of GIS in social sector planning: can developing countries benefit from the examples of primary health care (PHC) planning in Britain?

Science.gov (United States)

Ishfaq, Mohammad; Lodhi, Bilal Khan

2012-04-01

Social sector planning requires rational approaches where community needs are identified by referring to relative deprivation among localities and resources are allocated to address inequalities. Geographical information system (GIS) has been widely argued and used as a base for rational planning for equal resource allocation in social sectors around the globe. Devolution of primary health care is global strategy that needs pains taking efforts to implement it. GIS is one of the most important tools used around the world in decentralization process of primary health care. This paper examines the scope of GIS in social sector planning by concentration on primary health care delivery system in Pakistan. The work is based on example of the UK's decentralization process and further evidence from US. This paper argues that to achieve benefits of well informed decision making to meet the communities' needs GIS is an essential tool to support social sector planning and can be used without any difficulty in any environment. There is increasing trend in the use of Health Management Information System (HMIS) in Pakistan with ample internet connectivity which provides well established infrastructure in Pakistan to implement GIS for health care, however there is need for change in attitude towards empowering localities especially with reference to decentralization of decision making. This paper provides GIS as a tool for primary health care planning in Pakistan as a starting point in defining localities and preparing locality profiles for need identification that could help developing countries in implementing the change.

SOFTWARE ARCHITECTURE DESIGN OF GIS WEB SERVICE AGGREGATION BASED ON SERVICE GROUP

Directory of Open Access Journals (Sweden)

J.-C. Liu

2012-08-01

Full Text Available Based on the analysis of research status of domestic and international GIS web service aggregation and development tendency of public platform of GIS web service, the paper designed software architecture of GIS web service aggregation based on GIS web service group. Firstly, using heterogeneous GIS services model, the software architecture converted a variety of heterogeneous services to a unified interface of GIS services, and divided different types of GIS services into different service groups referring to description of GIS services. Secondly, a service aggregation process model was designed. This model completed the task of specific service aggregation instance, by automatically selecting member GIS Web services in the same service group. Dynamic capabilities and automatic adaptation of GIS Web services aggregation process were achieved. Thirdly, this paper designed a service evaluation model of GIS web service aggregation based on service group from three aspects, i.e. GIS Web Service itself, networking conditions and service consumer. This model implemented effective quality evaluation and performance monitoring of GIS web service aggregation. It could be used to guide the execution, monitor and service selection of aggregation process. Therefore, robustness of aggregated GIS web service was improved. Finally, the software architecture has been widely used in public platform of GIS web service and a number of geo-spatial framework constructions for digital city in Sichuan Province, and aggregated various GIS web services such as World Map(National Public Platform of Geo-spatial Service, ArcGIS, SuperMap, MapGIS, NewMap etc. Applications of items showed that this software architecture was practicability.

Evaluation of SOVAT: An OLAP-GIS decision support system for community health assessment data analysis

Directory of Open Access Journals (Sweden)

Parmanto Bambang

2008-06-01

Full Text Available Abstract Background Data analysis in community health assessment (CHA involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture. On-Line Analytical Processing (OLAP is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT currently used by many public health professionals. Methods SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS". Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Results Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (α = .01 from SPSS-GIS for satisfaction and time (p Conclusion Using SOVAT, tasks were completed more efficiently, with a higher rate of success, and with greater satisfaction, than the

A GIS-driven integrated real-time surveillance pilot system for national West Nile virus dead bird surveillance in Canada

Directory of Open Access Journals (Sweden)

Aramini Jeff

2006-04-01

Full Text Available Abstract Background An extensive West Nile virus surveillance program of dead birds, mosquitoes, horses, and human infection has been launched as a result of West Nile virus first being reported in Canada in 2001. Some desktop and web GIS have been applied to West Nile virus dead bird surveillance. There have been urgent needs for a comprehensive GIS services and real-time surveillance. Results A pilot system was developed to integrate real-time surveillance, real-time GIS, and Open GIS technology in order to enhance West Nile virus dead bird surveillance in Canada. Driven and linked by the newly developed real-time web GIS technology, this integrated real-time surveillance system includes conventional real-time web-based surveillance components, integrated real-time GIS components, and integrated Open GIS components. The pilot system identified the major GIS functions and capacities that may be important to public health surveillance. The six web GIS clients provide a wide range of GIS tools for public health surveillance. The pilot system has been serving Canadian national West Nile virus dead bird surveillance since 2005 and is adaptable to serve other disease surveillance. Conclusion This pilot system has streamlined, enriched and enhanced national West Nile virus dead bird surveillance in Canada, improved productivity, and reduced operation cost. Its real-time GIS technology, static map technology, WMS integration, and its integration with non-GIS real-time surveillance system made this pilot system unique in surveillance and public health GIS.

A GIS based hydrogeomorphic approach for identification of site ...

Indian Academy of Sciences (India)

a Geographical Information System (GIS) based hydrogeomorphic approach in the Bhatsa and. Kalu river basins of Thane district, in western DVP. The criteria adopted for the GIS analysis were based .... segments of the rivers. The majority of the lineaments correspond to either dyke ridges or stream channels which are of ...

PROMAB-GIS: A GIS based Tool for Estimating Runoff and Sediment Yield in running Waters

Science.gov (United States)

Jenewein, S.; Rinderer, M.; Ploner, A.; Sönser, T.

2003-04-01

In recent times settlements have expanded, traffic and tourist activities have increased in most alpine regions. As a consequence, on the one hand humans and goods are affected by natural hazard processes more often, while on the other hand the demand for protection by both technical constructions and planning measures carried out by public authorities is growing. This situation results in an ever stronger need of reproducibility, comparability, transparency of all methods applied in modern natural hazard management. As a contribution to a new way of coping this situation Promab-GIS Version 1.0 has been developed. Promab-Gis has been designed as a model for time- and space-dependent determination of both runoff and bedload transport in rivers of small alpine catchment areas. The estimation of the unit hydrograph relies upon the "rational formula" and the time-area curves of the watershed. The time area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. The sediment yield is estimated for each cell of the channel network by determining the actual process type (erosion, transport or accumulation). Two types of transport processes are considered, sediment transport and debris flows. All functions of Promab-GIS are integrated in the graphical user interface of ArcView as pull-up menus and tool buttons. Hence the application of Promab-GIS does not rely on a sophisticated knowledge of GIS in general, respectively the ArcView software. However, despite the use of computer assistance, Promab-GIS still is an expert support system. In order to obtain plausible results, the users must be familiar with all the relevant processes controlling runoff and sediment yield in torrent catchments.

Using geographical information systems (GIS to examine sanitary implications of rubbish dump locations at human activity centres

Directory of Open Access Journals (Sweden)

Lenos Koku Ankrah

2016-01-01

Full Text Available This study sought to investigate health risks that refuse dump locations have on people. The global positioning systems (GPS were used to take location coordinates of 28 rubbish dump centers and human activity centers (clinics, restaurants, markets etc spread across a university campus in Ghana. The ArcGIS software was used to plot the coordinates and draw a buffer of 50 meters around the rubbish dump locations (RDL to show the closeness between the dump sites and the human activity centers (HAC, and the sanitary implications of the closeness. More than 90% of the HACs fell within the 50 meters buffer zone of the rubbish dump sites. The findings indicated that some sensitive HACs like food joints, laundries etc. were less than 15 meters from rubbish dump sites. The findings confirmed that the location of rubbish dump sites pose serious threat to the health of the human community in the university. The findings of this study can be used to make evidence- based decisions about possible relocation of rubbish dump containers in the university. This study is also an initiative to set the tone for more detailed research work on the health implications of rubbish disposal management on Ghanaians.

Locating of Rural Health Centers Equipped with Telehealth using GIS: A Case Study on Khorramabad City, Iran

Directory of Open Access Journals (Sweden)

Safdari Reza

2016-10-01

Full Text Available Residents of the rural and remote area always having limitations on accessing properly required service providers. In such condition, the establishment of rural health centers equipped with telehealth, and also the use of GIS for optimal site selection to the centers, would play an important role in facilitating the achievement of quality health services in desired time factor. This study intended to find the optimal sites for building the Rural Health Centers Equipped with remote health facilities in, Khorramabad City, using GIS. During the pilot study, we identified few effective locating criteria and sub-criteria for rural health centers equipped with telehealth, the priorities was also determined in that descriptive study. Further, we prepared a special layer for each criterion on the site selection, and by integrating such layers based on specified rules and patterns, about the spatial analysis , (like distance and density analysis were done. For such methods, we used Arc Map, Arc Catalog and Arc toolbox environments of Arc GIS (version 9.3. Finally, a map was prepared that indicated the possibility of appropriateness for establishing the centers in the study area. Considering a large number of areas, the research team selected the areas which were the appropriate location for build rural health centers which could be equipped with Telehealth.

A GIS-based disaggregate spatial watershed analysis using RADAR data

International Nuclear Information System (INIS)

Al-Hamdan, M.

2002-01-01

Hydrology is the study of water in all its forms, origins, and destinations on the earth.This paper develops a novel modeling technique using a geographic information system (GIS) to facilitate watershed hydrological routing using RADAR data. The RADAR rainfall data, segmented to 4 km by 4 km blocks, divides the watershed into several sub basins which are modeled independently. A case study for the GIS-based disaggregate spatial watershed analysis using RADAR data is provided for South Fork Cowikee Creek near Batesville, Alabama. All the data necessary to complete the analysis is maintained in the ArcView GIS software. This paper concludes that the GIS-Based disaggregate spatial watershed analysis using RADAR data is a viable method to calculate hydrological routing for large watersheds. (author)

The use of GIS-based support of recreational trail planning by local governments

DEFF Research Database (Denmark)

Olafsson, Anton Stahl; Skov-Petersen, Hans

2014-01-01

In the last decade, multiple GIS-based planning support systems have been developed in order to improve the basis for spatial planning. Recent research has focused on problems regarding a lack of utilisation or barriers to the use of advanced GIS and GIS-based planning support systems in planning...... applications. This paper discusses these research findings in the context of outdoor recreational planning by local governments in Denmark. According to a national survey of municipal planners, GIS-based planning support is widely used in Denmark, but more GIS is needed and is being requested for local outdoor...... recreation planning. However, considerable differences exist between the ways municipalities assess their need for and use of GIS planning support. These differences are explored in more detail using a factor analysis of planning variables and uses of GIS. Three situations are described: 1) extensive network...

Validating the accuracy of GIS-based accessibility analysis in determining public primary health care demand in Metropolitan areas

CSIR Research Space (South Africa)

Mokgalaka, H

2014-07-01

Full Text Available dual system made up of private and public health care facilities. Private PHC is expensive and only affordable to affluent citizens or people with medical insurance, and does not form a part of this study. Two challenges regarding GIS...

Application of GIS Technology - cadastral base of the municipality of Gostivar

OpenAIRE

Serafimoski, Toni

2011-01-01

In the thesis is presented modern GIS technology and its application in the field of cadastre. GIS technology is essentially based on the display and information processing related to given geographical coordinates. In the paper is implemented GIS software package Microstation, widely applied in the field of cadastre. The paper developed model using data from the cadastre of the municipality of Gostivar. Applied GIS technology opens up wide possibilities of processing of cadastral data,...

Role of GIS in Health Management Information System and Medical Plan: A Case Study of Gangtok area, Sikkim, India

Directory of Open Access Journals (Sweden)

Ashok Kumar Sharma

2015-03-01

Full Text Available Geographical Information System (GIS in a Health Management Information System (HMIS can be a powerful tool to make health care delivery more effective and far more efficient. It includes database management, planning, risk service area mapping, location identification, etc. One of the causes for this sudden surge of GIS use in healthcare application is the spatial dependency of health related factors. The use of GIS helps capture, store, combine, analyze and display data using Remote Sensing, topographical surveys, urban survey and town planning, geology, hydrology, traffic and transport engineering, land use pattern, rainfall pattern, and drainage. (Mathew, 2005. In the research work use of GIS software ILWIS for assessing the social network and health services available in Gangtok area, East Sikkim. Mapping of essential resources like road networks, locate the health facility in the study area and find out the population density using GIS techniques.

Interpreting the International Right to Health in a Human Rights-Based Approach to Health

OpenAIRE

Hunt, Paul

2016-01-01

Abstract This article tracks the shifting place of the international right to health, and human rights-based approaches to health, in the scholarly literature and United Nations (UN). From 1993 to 1994, the focus began to move from the right to health toward human rights-based approaches to health, including human rights guidance adopted by UN agencies in relation to specific health issues. There is a compelling case for a human rights-based approach to health, but it runs the risk of playing...

Malaria diagnosis and mapping with m-Health and geographic information systems (GIS): evidence from Uganda.

Science.gov (United States)

Larocca, Alberto; Moro Visconti, Roberto; Marconi, Michele

2016-10-24

Rural populations experience several barriers to accessing clinical facilities for malaria diagnosis. Increasing penetration of ICT and mobile-phones and subsequent m-Health applications can contribute overcoming such obstacles. GIS is used to evaluate the feasibility of m-Health technologies as part of anti-malaria strategies. This study investigates where in Uganda: (1) malaria affects the largest number of people; (2) the application of m-Health protocol based on the mobile network has the highest potential impact. About 75% of the population affected by Plasmodium falciparum malaria have scarce access to healthcare facilities. The introduction of m-Health technologies should be based on the 2G protocol, as 3G mobile network coverage is still limited. The western border and the central-Southeast are the regions where m-Health could reach the largest percentage of the remote population. Six districts (Arua, Apac, Lira, Kamuli, Iganga, and Mubende) could have the largest benefit because they account for about 28% of the remote population affected by falciparum malaria with access to the 2G mobile network. The application of m-Health technologies could improve access to medical services for distant populations. Affordable remote malaria diagnosis could help to decongest health facilities, reducing costs and contagion. The combination of m-Health and GIS could provide real-time and geo-localized data transmission, improving anti-malarial strategies in Uganda. Scalability to other countries and diseases looks promising.

Malaria diagnosis and mapping with m-Health and geographic information systems (GIS: evidence from Uganda

Directory of Open Access Journals (Sweden)

Alberto Larocca

2016-10-01

Full Text Available Abstract Background Rural populations experience several barriers to accessing clinical facilities for malaria diagnosis. Increasing penetration of ICT and mobile-phones and subsequent m-Health applications can contribute overcoming such obstacles. Methods GIS is used to evaluate the feasibility of m-Health technologies as part of anti-malaria strategies. This study investigates where in Uganda: (1 malaria affects the largest number of people; (2 the application of m-Health protocol based on the mobile network has the highest potential impact. Results About 75% of the population affected by Plasmodium falciparum malaria have scarce access to healthcare facilities. The introduction of m-Health technologies should be based on the 2G protocol, as 3G mobile network coverage is still limited. The western border and the central-Southeast are the regions where m-Health could reach the largest percentage of the remote population. Six districts (Arua, Apac, Lira, Kamuli, Iganga, and Mubende could have the largest benefit because they account for about 28% of the remote population affected by falciparum malaria with access to the 2G mobile network. Conclusions The application of m-Health technologies could improve access to medical services for distant populations. Affordable remote malaria diagnosis could help to decongest health facilities, reducing costs and contagion. The combination of m-Health and GIS could provide real-time and geo-localized data transmission, improving anti-malarial strategies in Uganda. Scalability to other countries and diseases looks promising.

GIS in the Assessment of the Impact of Microclimatic Variables on ...

African Journals Online (AJOL)

Seun Samuel

micro climate as well as the level of human comfort in Akure, Nigeria. ... The effect of the climatic variability can be seen on human well-being, health and environment ... By utilizing and implementing GIS mapping techniques, changes in urban ...

GIS-based models for ambient PM exposure and health impact assessment for the UK

International Nuclear Information System (INIS)

Stedman, John R; Grice, Susannah; Kent, Andrew; Cooke, Sally

2009-01-01

GIS-based models have been developed to map ambient PM 10 and PM 25 mass concentrations across the UK. The resulting maps are used for the assessments of air quality required by the EU ambient air quality directives, health impact assessment and the development of UK air quality policy. Maps are presented for 2006 along with projections to 2020. The largest single contribution to the UK population-weighted mean annual mean background concentrations of PM 10 in 2006 is estimated to be from secondary PM (43%), followed by the contribution from primary PM (24%). Concentrations are predicted to decline by 15% for PM 10 and 13% for PM 25 over the period from 2006 to 2020. The extent of exceedence of the 24-hour limit value is predicted to decline from 1.9% to 0.1% of urban major roads over the same period. The potential health benefits of reductions in ambient PM are large. A reduction in concentration of 0.93 μg m -3 as a result of a possible package of measures has been estimated within the UK Air Quality Strategy to result in a reduction in life years lost of approximately 2 - 4 million over a period of 100 years.

Research on Livable Community Evaluation Based on GIS

Science.gov (United States)

Yin, Zhangcai; Wu, Yang; Jin, Zhanghaonan; Zhang, Xu

2018-01-01

Community is the basic unit of the city. Research on livable community could provide a bottom-up research path for the realization of livable city. Livability is the total factor affecting the quality of community life. In this paper, livable community evaluation indexes are evaluated based on GIS and fuzzy comprehensive evaluation method. Then the sum-index and sub-index of community livability are both calculated. And community livable evaluation index system is constructed based on the platform of GIS. This study provides theoretical support for the construction and management of livable communities, so as to guide the development and optimization of city.

Gis-Based Multi-Criteria Decision Analysis for Forest Fire Risk Mapping

Science.gov (United States)

Akay, A. E.; Erdoğan, A.

2017-11-01

The forested areas along the coastal zone of the Mediterranean region in Turkey are classified as first-degree fire sensitive areas. Forest fires are major environmental disaster that affects the sustainability of forest ecosystems. Besides, forest fires result in important economic losses and even threaten human lives. Thus, it is critical to determine the forested areas with fire risks and thereby minimize the damages on forest resources by taking necessary precaution measures in these areas. The risk of forest fire can be assessed based on various factors such as forest vegetation structures (tree species, crown closure, tree stage), topographic features (slope and aspect), and climatic parameters (temperature, wind). In this study, GIS-based Multi-Criteria Decision Analysis (MCDA) method was used to generate forest fire risk map. The study was implemented in the forested areas within Yayla Forest Enterprise Chiefs at Dursunbey Forest Enterprise Directorate which is classified as first degree fire sensitive area. In the solution process, "extAhp 2.0" plug-in running Analytic Hierarchy Process (AHP) method in ArcGIS 10.4.1 was used to categorize study area under five fire risk classes: extreme risk, high risk, moderate risk, and low risk. The results indicated that 23.81 % of the area was of extreme risk, while 25.81 % was of high risk. The result indicated that the most effective criterion was tree species, followed by tree stages. The aspect had the least effective criterion on forest fire risk. It was revealed that GIS techniques integrated with MCDA methods are effective tools to quickly estimate forest fire risk at low cost. The integration of these factors into GIS can be very useful to determine forested areas with high fire risk and also to plan forestry management after fire.

GIS and radiological crisis management

International Nuclear Information System (INIS)

Kacenelen, Y.

2009-01-01

The author reports a new operational exercise performed on September 17, 2009 on the CEA Saclay site. For this purpose, the CEA (the French Atomic Energy Commission) developed M2IRAGE, a tool based on ArcGIS 9.3 technologies. This tool allows an easier data collection and exploitation in order to quickly map the distribution of radioactive particles and thus help the management of the health response and emergency organization within two hours after the warning. This tool notably uses a geographic information system (GIS)

The research and implementation of coalfield spontaneous combustion of carbon emission WebGIS based on Silverlight and ArcGIS server

International Nuclear Information System (INIS)

Zhu, Z; Bi, J; Wang, X; Zhu, W

2014-01-01

As an important sub-topic of the natural process of carbon emission data public information platform construction, coalfield spontaneous combustion of carbon emission WebGIS system has become an important study object. In connection with data features of coalfield spontaneous combustion carbon emissions (i.e. a wide range of data, which is rich and complex) and the geospatial characteristics, data is divided into attribute data and spatial data. Based on full analysis of the data, completed the detailed design of the Oracle database and stored on the Oracle database. Through Silverlight rich client technology and the expansion of WCF services, achieved the attribute data of web dynamic query, retrieval, statistical, analysis and other functions. For spatial data, we take advantage of ArcGIS Server and Silverlight-based API to invoke GIS server background published map services, GP services, Image services and other services, implemented coalfield spontaneous combustion of remote sensing image data and web map data display, data analysis, thematic map production. The study found that the Silverlight technology, based on rich client and object-oriented framework for WCF service, can efficiently constructed a WebGIS system. And then, combined with ArcGIS Silverlight API to achieve interactive query attribute data and spatial data of coalfield spontaneous emmission, can greatly improve the performance of WebGIS system. At the same time, it provided a strong guarantee for the construction of public information on China's carbon emission data

Improving the Distribution of Rural Health Houses Using Elicitation and GIS in Khuzestan Province (the Southwest of Iran).

Science.gov (United States)

Mohammadi, Ali; Valinejadi, Ali; Sakipour, Sara; Hemmat, Morteza; Zarei, Javad; Askari Majdabadi, Hesamedin

2017-08-27

Rural health houses constitute a major provider of some primary health services in the villages of Iran. Given the challenges of providing health services in rural areas, health houses should be established based on the criteria of health network systems (HNSs). The value of these criteria and their precedence over others have not yet been thoroughly investigated. The present study was conducted to propose a model for improving the distribution of rural health houses in HNSs. The present applied study was conducted in Khuzestan province in the southwest of Iran in 2014-2016. First, the descriptive and spatial data required were collected and entered into ArcGIS after modifications, and the Geodatabase was then created. Based on the criteria of the HNS and according to experts' opinions, the main criteria and the sub-criteria for an optimal site selection were determined. To determine the criteria's coefficient of importance (ie, their weight), the main criteria and the sub-criteria were compared in pairs according to experts' opinions. The results of the pairwise comparisons were entered into Expert Choice and the weight of the main criteria and the sub-criteria were determined using the analytic hierarchy process (AHP). The application layers were then formed in geographic information system (GIS). A model was ultimately proposed in the GIS for the optimal distribution of rural health houses by overlaying the weighting layers and the other layers related to villages and rural health houses. Based on the experts' opinions, six criteria were determined as the main criteria for an optimal site selection for rural health houses, including welfare infrastructures, population, dispersion, accessibility, corresponding routes, distance to the rural health center and the absence of natural barriers to accessibility. Of the main criteria proposed, the highest weight was given to "population" (0.506). The priorities suggested in the proposed model for establishing rural

Smart caching based on mobile agent of power WebGIS platform.

Science.gov (United States)

Wang, Xiaohui; Wu, Kehe; Chen, Fei

2013-01-01

Power information construction is developing towards intensive, platform, distributed direction with the expansion of power grid and improvement of information technology. In order to meet the trend, power WebGIS was designed and developed. In this paper, we first discuss the architecture and functionality of power WebGIS, and then we study caching technology in detail, which contains dynamic display cache model, caching structure based on mobile agent, and cache data model. We have designed experiments of different data capacity to contrast performance between WebGIS with the proposed caching model and traditional WebGIS. The experimental results showed that, with the same hardware environment, the response time of WebGIS with and without caching model increased as data capacity growing, while the larger the data was, the higher the performance of WebGIS with proposed caching model improved.

Integrating GIS components with knowledge discovery technology for environmental health decision support.

Science.gov (United States)

Bédard, Yvan; Gosselin, Pierre; Rivest, Sonia; Proulx, Marie-Josée; Nadeau, Martin; Lebel, Germain; Gagnon, Marie-France

2003-04-01

This paper presents a new category of decision-support tools that builds on today's Geographic Information Systems (GIS) and On-Line Analytical Processing (OLAP) technologies to facilitate Geographic Knowledge Discovery (GKD). This new category, named Spatial OLAP (SOLAP), has been an R&D topic for about 5 years in a few university labs and is now being implemented by early adopters in different fields, including public health where it provides numerous advantages. In this paper, we present an example of a SOLAP application in the field of environmental health: the ICEM-SE project. After having presented this example, we describe the design of this system and explain how it provides fast and easy access to the detailed and aggregated data that are needed for GKD and decision-making in public health. The SOLAP concept is also described and a comparison is made with traditional GIS applications.

GIS4schools: a new approach in GIS education

Science.gov (United States)

Demharter, Timo; Michel, Ulrich

2012-10-01

From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS (KERSKI 2000, SCHLEICHER 2004). Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

GRASS GIS: The first Open Source Temporal GIS

Science.gov (United States)

Gebbert, Sören; Leppelt, Thomas

2015-04-01

GRASS GIS is a full featured, general purpose Open Source geographic information system (GIS) with raster, 3D raster and vector processing support[1]. Recently, time was introduced as a new dimension that transformed GRASS GIS into the first Open Source temporal GIS with comprehensive spatio-temporal analysis, processing and visualization capabilities[2]. New spatio-temporal data types were introduced in GRASS GIS version 7, to manage raster, 3D raster and vector time series. These new data types are called space time datasets. They are designed to efficiently handle hundreds of thousands of time stamped raster, 3D raster and vector map layers of any size. Time stamps can be defined as time intervals or time instances in Gregorian calendar time or relative time. Space time datasets are simplifying the processing and analysis of large time series in GRASS GIS, since these new data types are used as input and output parameter in temporal modules. The handling of space time datasets is therefore equal to the handling of raster, 3D raster and vector map layers in GRASS GIS. A new dedicated Python library, the GRASS GIS Temporal Framework, was designed to implement the spatio-temporal data types and their management. The framework provides the functionality to efficiently handle hundreds of thousands of time stamped map layers and their spatio-temporal topological relations. The framework supports reasoning based on the temporal granularity of space time datasets as well as their temporal topology. It was designed in conjunction with the PyGRASS [3] library to support parallel processing of large datasets, that has a long tradition in GRASS GIS [4,5]. We will present a subset of more than 40 temporal modules that were implemented based on the GRASS GIS Temporal Framework, PyGRASS and the GRASS GIS Python scripting library. These modules provide a comprehensive temporal GIS tool set. The functionality range from space time dataset and time stamped map layer management

GIS-based modelling of odour emitted from the waste processing plant: case study

Directory of Open Access Journals (Sweden)

Sόwka Izabela

2017-01-01

Full Text Available The emission of odours into the atmospheric air from the municipal economy and industrial plants, especially in urbanized areas, causes a serious problem, which the mankind has been struggling with for years. The excessive exposure of people to odours may result in many negative health effects, including, for example, headaches and vomiting. There are many different methods that are used in order to evaluate the odour nuisance. The results obtained through those methods can then be used to carry out a visualization and an analysis of a distribution of the odour concentrations in a given area by using the GIS (Geographic Information System. By their application to the spatial analysis of the impact of odours, we can enable the assessment of the magnitude and likelihood of the occurrence of odour nuisance. Modelling using GIS tools and spatial interpolation like IDW method and kriging can provide an alternative to the standard modelling tools, which generally use the emission values from sources that are identified as major emitters of odours. The work presents the result, based on the odour measurements data from waste processing plant, of the attempt to connect two different tools – the reference model OPERAT FB and GIS-based dispersion modelling performed using IDW method and ordinary kriging to analyse their behaviour in terms of limited observation values.

GIS for Health and the Environment | CRDI - Centre de recherches ...

International Development Research Centre (IDRC) Digital Library (Canada)

Dans le monde en développement, les secteurs de l'agriculture, des ressources naturelles, de l'urbanisme, de la planification régionale et du tourisme utilisent les SIG depuis des années. Le secteur de la santé vient toutefois de commencer seulement à utiliser cet outil puissant. GIS for Health and the Environment recueille ...

The Multi-factor Predictive Seis &Gis Model of Ecological, Genetical, Population Health Risk and Bio-geodynamic Processes In Geopathogenic Zones

Science.gov (United States)

Bondarenko, Y.

popula- tion sickness cases in Dnipropetrovsk City (1.2 million persons) are described by the multi-factor predictive SEIS & GIS model of geopathogenic zones that determines the human health risk and hazards. Results and Conclusions. We have created the SEIS system and multi-factor predictive SEIS model for the analysis of phase-metric spatio- 1 temporal nonlinear correlation and variations of rhythms of human health, ecological, genetic, epidemiological risks, demographic, socio-economic, bio-geophysical, bio- geodynamic processes in geopathogenic hazard zones. Cosmophotomaps "CPM" of vegetation index, anthropogenic-landscape and landscape-geophysical human health risk of Dnipropetrovsk City present synthesis-based elements of multi-layer GIS, which include multispectral images SPOT o, maps of different geophysical, geochem- ical, anthropogenic and citogenic risk factors, maps of integral oncologic case rate frequency, general and primary population sickness cases for administrative districts. Results of multi-layer spatio-temporal correlation of geophysical field parameters and variations of population sickness rate rhythms have enabled us to state grounds and to develop medico-biological and bio-geodynamic classification of geopathogenic zones. Bio-geodynamic model has served to define contours of anthropogenic-landscape and landscape-geophysical human health risk in Dnipropetrovsk City. Biorhythmic vari- ations give foundation for understanding physiological mechanisms of organism`s adaptation to extreme helio-geophysical and bio-geodynamic environmental condi- tions, which are dictated by changes in Multi-factor Correlation Stress Field "MCSF" with deformation of 5D SEIS. Interaction between organism and environment results in continuous superpositioning of external (exogenic) Nuclear-Molecular-Cristallic "NMC" MCSF rhythms on internal (endogenic) Nuclear-Molecular-Cellular "NMCl" MCSF rhythms. Their resonance wave (energy-information) integration and disinte

Spatial modelling of arsenic distribution and human health effects in Lake Victoria basin, Tanzania

Science.gov (United States)

Ijumulana, Julian; Mtalo, Felix; Bhattacharya, Prosun

2016-04-01

Increasing incidences of naturally occurring geogenic pollutants in drinking water sources and associated human health risks are the two major challenges requiring detailed knowledge to support decision making process at various levels. The presence, location and extent of environmental contamination is needed towards developing mitigation measures to achieve required standards. In this study we are developing a GIS-based model to detect and predict drinking water pollutants at the identified hotspots and monitor its variation in space. In addition, the mobility of pollutants within the affected region needs to be evaluated using topographic and hydrogeological data. Based on these geospatial data on contaminant distribution, spatial relationship of As and F contamination and reported human health effects such as dental caries, dental fluorosis, skeletal fluorosis and bone crippling, skin and other cancers etc. can be modeled for potential interventions for safe drinking water supplies.

GIS4schools: custom-made GIS-applications for educational use

Science.gov (United States)

Demharter, Timo; Michel, Ulrich

2013-10-01

From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS [1]. Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

WebGIS based on semantic grid model and web services

Science.gov (United States)

Zhang, WangFei; Yue, CaiRong; Gao, JianGuo

2009-10-01

As the combination point of the network technology and GIS technology, WebGIS has got the fast development in recent years. With the restriction of Web and the characteristics of GIS, traditional WebGIS has some prominent problems existing in development. For example, it can't accomplish the interoperability of heterogeneous spatial databases; it can't accomplish the data access of cross-platform. With the appearance of Web Service and Grid technology, there appeared great change in field of WebGIS. Web Service provided an interface which can give information of different site the ability of data sharing and inter communication. The goal of Grid technology was to make the internet to a large and super computer, with this computer we can efficiently implement the overall sharing of computing resources, storage resource, data resource, information resource, knowledge resources and experts resources. But to WebGIS, we only implement the physically connection of data and information and these is far from the enough. Because of the different understanding of the world, following different professional regulations, different policies and different habits, the experts in different field will get different end when they observed the same geographic phenomenon and the semantic heterogeneity produced. Since these there are large differences to the same concept in different field. If we use the WebGIS without considering of the semantic heterogeneity, we will answer the questions users proposed wrongly or we can't answer the questions users proposed. To solve this problem, this paper put forward and experienced an effective method of combing semantic grid and Web Services technology to develop WebGIS. In this paper, we studied the method to construct ontology and the method to combine Grid technology and Web Services and with the detailed analysis of computing characteristics and application model in the distribution of data, we designed the WebGIS query system driven by

From urban planning and emergency training to Pokémon Go: applications of virtual reality GIS (VRGIS) and augmented reality GIS (ARGIS) in personal, public and environmental health.

Science.gov (United States)

Kamel Boulos, Maged N; Lu, Zhihan; Guerrero, Paul; Jennett, Charlene; Steed, Anthony

2017-02-20

The latest generation of virtual and mixed reality hardware has rekindled interest in virtual reality GIS (VRGIS) and augmented reality GIS (ARGIS) applications in health, and opened up new and exciting opportunities and possibilities for using these technologies in the personal and public health arenas. From smart urban planning and emergency training to Pokémon Go, this article offers a snapshot of some of the most remarkable VRGIS and ARGIS solutions for tackling public and environmental health problems, and bringing about safer and healthier living options to individuals and communities. The article also covers the main technical foundations and issues underpinning these solutions.

From urban planning and emergency training to Pokémon Go: applications of virtual reality GIS (VRGIS and augmented reality GIS (ARGIS in personal, public and environmental health

Directory of Open Access Journals (Sweden)

Maged N. Kamel Boulos

2017-02-01

Full Text Available Abstract The latest generation of virtual and mixed reality hardware has rekindled interest in virtual reality GIS (VRGIS and augmented reality GIS (ARGIS applications in health, and opened up new and exciting opportunities and possibilities for using these technologies in the personal and public health arenas. From smart urban planning and emergency training to Pokémon Go, this article offers a snapshot of some of the most remarkable VRGIS and ARGIS solutions for tackling public and environmental health problems, and bringing about safer and healthier living options to individuals and communities. The article also covers the main technical foundations and issues underpinning these solutions.

Analysis Of Educational Services Distribution-Based Geographic Information System GIS

OpenAIRE

Waleed Lagrab; Noura AKNIN

2015-01-01

Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facil...

Modelling domestic stock energy use and heat-related health risk : a GIS-based bottom-up modelling approach

Energy Technology Data Exchange (ETDEWEB)

Mavrogianni, A.; Davies, M. [Univ. College London, London (United Kingdom). Bartlett School of Graduate Studies; Chalabi, Z.; Wilkinson, P. [London School of Hygiene and Tropical Medecine, London (United Kingdom); Kolokotroni, M. [Brunel Univ., London (United Kingdom). School of Engineering Design

2009-07-01

Approximately 8 per cent of the carbon dioxide (CO{sub 2}) emissions produced in the United Kingdom are produced in London, one of the fastest growing cities worldwide. Based on the projected rates of population and economic growth, a 15 per cent increase of emissions is predicted. In addition to the national target to cut emissions by 80 per cent by 2050, the Mayor of London Climate Change Action Plan set a target to reduce London's CO{sub 2} emissions by 60 per cent by 2025. Significant carbon savings can be achieved in the building sector, particularly since 38 per cent of the total delivered energy in London is associated with domestic energy use. This paper demonstrated a systematic approach towards exploring the impact of urban built form and the combined effect of climate change and the urban heat island (UHI) phenomenon on the levels of domestic energy consumption and heat-related health risk in London. It presented work in progress on the development of a GIS-based energy consumption model and heat vulnerability index of the Greater London Area domestic stock. Comparison of the model output for 10 case study areas with topdown energy statistics revealed that the model successfully ranks areas based on their domestic space heating demand. The health module can be used to determine environments prone to higher risk of heat stress by investigating urban texture factors. A newly developed epidemiological model will be feed into the health module to examine the influence on risk of heat-related mortality of local urban built form characteristics. The epidemiological model is based on multi-variable analysis of deaths during heat wave and non-heat wave days. 29 refs., 1 tab., 7 figs.

Highway traffic noise prediction based on GIS

Science.gov (United States)

Zhao, Jianghua; Qin, Qiming

2014-05-01

Before building a new road, we need to predict the traffic noise generated by vehicles. Traditional traffic noise prediction methods are based on certain locations and they are not only time-consuming, high cost, but also cannot be visualized. Geographical Information System (GIS) can not only solve the problem of manual data processing, but also can get noise values at any point. The paper selected a road segment from Wenxi to Heyang. According to the geographical overview of the study area and the comparison between several models, we combine the JTG B03-2006 model and the HJ2.4-2009 model to predict the traffic noise depending on the circumstances. Finally, we interpolate the noise values at each prediction point and then generate contours of noise. By overlaying the village data on the noise contour layer, we can get the thematic maps. The use of GIS for road traffic noise prediction greatly facilitates the decision-makers because of GIS spatial analysis function and visualization capabilities. We can clearly see the districts where noise are excessive, and thus it becomes convenient to optimize the road line and take noise reduction measures such as installing sound barriers and relocating villages and so on.

When Informationists Get Involved: the CHICA-GIS Project.

Science.gov (United States)

Whipple, Elizabeth C; Odell, Jere D; Ralston, Rick K; Liu, Gilbert C

2013-01-01

Child Health Improvement through Computer Automation (CHICA) is a computer decision support system (CDSS) that interfaces with existing electronic medical record systems (EMRS) and delivers "just-in-time" patient-relevant guidelines to physicians during the clinical encounter and accurately captures structured data from all who interact with the system. "Delivering Geospatial Intelligence to Health Care Professionals (CHICA-GIS)" (1R01LM010923-01) expands the medical application of Geographic Information Systems (GIS) by integrating a geographic information system with CHICA. To provide knowledge management support for CHICA-GIS, three informationists at the Indiana University School of Medicine were awarded a supplement from the National Library Medicine. The informationists will enhance CHICA-GIS by: improving the accuracy and accessibility of information, managing and mapping the knowledge which undergirds the CHICA-GIS decision support tool, supporting community engagement and consumer health information outreach, and facilitating the dissemination of new CHICA-GIS research results and services.

Evaluating terrain based criteria for snow avalanche exposure ratings using GIS

Science.gov (United States)

Delparte, Donna; Jamieson, Bruce; Waters, Nigel

2010-05-01

Snow avalanche terrain in backcountry regions of Canada is increasingly being assessed based upon the Avalanche Terrain Exposure Scale (ATES). ATES is a terrain based classification introduced in 2004 by Parks Canada to identify "simple", "challenging" and "complex" backcountry areas. The ATES rating system has been applied to well over 200 backcountry routes, has been used in guidebooks, trailhead signs and maps and is part of the trip planning component of the AVALUATOR™, a simple decision-support tool for backcountry users. Geographic Information Systems (GIS) offers a means to model and visualize terrain based criteria through the use of digital elevation model (DEM) and land cover data. Primary topographic variables such as slope, aspect and curvature are easily derived from a DEM and are compatible with the equivalent evaluation criteria in ATES. Other components of the ATES classification are difficult to extract from a DEM as they are not strictly terrain based. An overview is provided of the terrain variables that can be generated from DEM and land cover data; criteria from ATES which are not clearly terrain based are identified for further study or revision. The second component of this investigation was the development of an algorithm for inputting suitable ATES criteria into a GIS, thereby mimicking the process avalanche experts use when applying the ATES classification to snow avalanche terrain. GIS based classifications were compared to existing expert assessments for validity. The advantage of automating the ATES classification process through GIS is to assist avalanche experts with categorizing and mapping remote backcountry terrain.

GIS-based landscape design research: Stourhead landscape garden as a case study

Directory of Open Access Journals (Sweden)

Steffen Nijhuis

2017-11-01

Full Text Available Landscape design research is important for cultivating spatial intelligence in landscape architecture. This study explores GIS (geographic information systems as a tool for landscape design research - investigating landscape designs to understand them as architectonic compositions (architectonic plan analysis. The concept ‘composition’ refers to a conceivable arrangement, an architectural expression of a mental construct that is legible and open to interpretation. Landscape architectonic compositions and their representations embody a great wealth of design knowledge as objects of our material culture and reflect the possible treatment of the ground, space, image and program as a characteristic coherence. By exploring landscape architectonic compositions with GIS, design researchers can acquire design knowledge that can be used in the creation and refinement of a design.  The research aims to identify and illustrate the potential role of GIS as a tool in landscape design research, so as to provide insight into the possibilities and limitations of using GIS in this capacity. The critical, information-oriented case of Stourhead landscape garden (Wiltshire, UK, an example of a designed landscape that covers the scope and remit of landscape architecture design, forms the heart of the study. The exploration of Stourhead by means of GIS can be understood as a plausibility probe. Here the case study is considered a form of ‘quasi-experiment’, testing the hypothesis and generating a learning process that constitutes a prerequisite for advanced understanding, while using an adjusted version of the framework for landscape design analysis by Steenbergen and Reh (2003. This is a theoretically informed analytical method based on the formal interpretation of the landscape architectonic composition addressing four landscape architectonic categories: the basic, the spatial, the symbolic and the programmatic form. This study includes new aspects to be

Tsunami Hazard Preventing Based Land Use Planning Model Using GIS Techniques in Muang Krabi, Thailand

Directory of Open Access Journals (Sweden)

Abdul Salam Soomro

2012-10-01

Full Text Available The terrible tsunami disaster, on 26 December 2004 hit Krabi, one of the ecotourist and very fascinating provinces of southern Thailand including its various regions e.g. Phangna and Phuket by devastating the human lives, coastal communications and the financially viable activities. This research study has been aimed to generate the tsunami hazard preventing based lands use planning model using GIS (Geographical Information Systems based on the hazard suitability analysis approach. The different triggering factors e.g. elevation, proximity to shore line, population density, mangrove, forest, stream and road have been used based on the land use zoning criteria. Those criteria have been used by using Saaty scale of importance one, of the mathematical techniques. This model has been classified according to the land suitability classification. The various techniques of GIS, namely subsetting, spatial analysis, map difference and data conversion have been used. The model has been generated with five categories such as high, moderate, low, very low and not suitable regions illustrating with their appropriate definition for the decision makers to redevelop the region.

Tsunami hazard preventing based land use planing model using GIS technique in Muang Krabi, Thailand

International Nuclear Information System (INIS)

Soormo, A.S.

2012-01-01

The terrible tsunami disaster, on 26 December 2004 hit Krabi, one of the ecotourist and very fascinating provinces of southern Thailand including its various regions e.g. Phangna and Phuket by devastating the human lives, coastal communications and the financially viable activities. This research study has been aimed to generate the tsunami hazard preventing based lands use planning model using GIS (Geographical Information Systems) based on the hazard suitability analysis approach. The different triggering factors e.g. elevation, proximity to shore line, population density, mangrove, forest, stream and road have been used based on the land use zoning criteria. Those criteria have been used by using Saaty scale of importance one, of the mathematical techniques. This model has been classified according to the land suitability classification. The various techniques of GIS, namely subsetting, spatial analysis, map difference and data conversion have been used. The model has been generated with five categories such as high, moderate, low, very low and not suitable regions illustrating with their appropriate definition for the decision makers to redevelop the region. (author)

Human Rights-Based Approaches to Mental Health: A Review of Programs.

Science.gov (United States)

Porsdam Mann, Sebastian; Bradley, Valerie J; Sahakian, Barbara J

2016-06-01

The incidence of human rights violations in mental health care across nations has been described as a "global emergency" and an "unresolved global crisis." The relationship between mental health and human rights is complex and bidirectional. Human rights violations can negatively impact mental health. Conversely, respecting human rights can improve mental health. This article reviews cases where an explicitly human rights-based approach was used in mental health care settings. Although the included studies did not exhibit a high level of methodological rigor, the qualitative information obtained was considered useful and informative for future studies. All studies reviewed suggest that human-rights based approaches can lead to clinical improvements at relatively low costs. Human rights-based approaches should be utilized for legal and moral reasons, since human rights are fundamental pillars of justice and civilization. The fact that such approaches can contribute to positive therapeutic outcomes and, potentially, cost savings, is additional reason for their implementation. However, the small sample size and lack of controlled, quantitative measures limit the strength of conclusions drawn from included studies. More objective, high quality research is needed to ascertain the true extent of benefits to service users and providers.

Study on GIS Visualization in Evaluation of the Human Living Environment in Shenyang-Dalian Urban Agglomeration

Directory of Open Access Journals (Sweden)

Kang Hou

2016-01-01

Full Text Available Analysis of human living environmental quality of Shenyang-Dalian urban agglomerations has important theoretical and practical significance in rapid development region. A lot of investigations have been carried for Shenyang-Dalian urban agglomerations, including 38 counties. Based on the carrying capacity of resources, natural and socioeconomic environmental factors and regional changes of human living environmental evaluation are analyzed with the application of geographic information systems (GIS software. By using principal component analysis (PCA model and natural breaks classification (NBC method, the evaluation results are divided into five categories. The results show that the human living environmental evaluation (HLEE indexes of Dalian, Shenyang, and Liaoyang are higher than other counties. Among these counties, the human living environmental evaluation (HLEE indexes of coastal counties are significantly higher than inland counties. The range of the human living environmental evaluation index in most of the study area is at III, IV, and V levels, accounting for 80.01%. Based on these results, it could illustrate the human living environment is in relatively suitable condition in Shenyang-Dalian urban agglomeration.

GIS Based Measurement and Regulatory Zoning of Urban Ecological Vulnerability

Directory of Open Access Journals (Sweden)

Xiaorui Zhang

2015-07-01

Full Text Available Urban ecological vulnerability is measured on the basis of ecological sensitivity and resilience based on the concept analysis of vulnerability. GIS-based multicriteria decision analysis (GIS-MCDA methods are used, supported by the spatial analysis tools of GIS, to define different levels of vulnerability for areas of the urban ecology. These areas are further classified into different types of regulatory zones. Taking the city of Hefei in China as the empirical research site, this study uses GIS-MCDA, including the index system, index weights and overlay rules, to measure the degree of its ecological vulnerability on the GIS platform. There are eight indices in the system. Raking and analytical hierarchy process (AHP methods are used to calculate index weights according to the characteristics of the index system. The integrated overlay rule, including selection of the maximum value, and weighted linear combination (WLC are applied as the overlay rules. In this way, five types of vulnerability areas have been classified as follows: very low vulnerability, low vulnerability, medium vulnerability, high vulnerability and very high vulnerability. They can be further grouped into three types of regulatory zone of ecological green line, ecological grey line and ecological red line. The study demonstrates that ecological green line areas are the largest (53.61% of the total study area and can be intensively developed; ecological grey line areas (19.59% of the total area can serve as the ecological buffer zone, and ecological red line areas (26.80% cannot be developed and must be protected. The results indicate that ecological green line areas may provide sufficient room for future urban development in Hefei city. Finally, the respective regulatory countermeasures are put forward. This research provides a scientific basis for decision-making around urban ecological protection, construction and sustainable development. It also provides theoretical method

Security attack detection algorithm for electric power gis system based on mobile application

Science.gov (United States)

Zhou, Chao; Feng, Renjun; Wang, Liming; Huang, Wei; Guo, Yajuan

2017-05-01

Electric power GIS is one of the key information technologies to satisfy the power grid construction in China, and widely used in power grid construction planning, weather, and power distribution management. The introduction of electric power GIS based on mobile applications is an effective extension of the geographic information system that has been widely used in the electric power industry. It provides reliable, cheap and sustainable power service for the country. The accurate state estimation is the important conditions to maintain the normal operation of the electric power GIS. Recent research has shown that attackers can inject the complex false data into the power system. The injection attack of this new type of false data (load integrity attack LIA) can successfully bypass the routine detection to achieve the purpose of attack, so that the control center will make a series of wrong decision. Eventually, leading to uneven distribution of power in the grid. In order to ensure the safety of the electric power GIS system based on mobile application, it is very important to analyze the attack mechanism and propose a new type of attack, and to study the corresponding detection method and prevention strategy in the environment of electric power GIS system based on mobile application.

Using Geographic Information Systems (GIS) to understand a community's primary care needs.

Science.gov (United States)

Dulin, Michael F; Ludden, Thomas M; Tapp, Hazel; Blackwell, Joshua; de Hernandez, Brisa Urquieta; Smith, Heather A; Furuseth, Owen J

2010-01-01

A key element for reducing health care costs and improving community health is increased access to primary care and preventative health services. Geographic information systems (GIS) have the potential to assess patterns of health care utilization and community-level attributes to identify geographic regions most in need of primary care access. GIS, analytical hierarchy process, and multiattribute assessment and evaluation techniques were used to examine attributes describing primary care need and identify areas that would benefit from increased access to primary care services. Attributes were identified by a collaborative partnership working within a practice-based research network using tenets of community-based participatory research. Maps were created based on socioeconomic status, population density, insurance status, and emergency department and primary care safety-net utilization. Individual and composite maps identified areas in our community with the greatest need for increased access to primary care services. Applying GIS to commonly available community- and patient-level data can rapidly identify areas most in need of increased access to primary care services. We have termed this a Multiple Attribute Primary Care Targeting Strategy. This model can be used to plan health services delivery as well as to target and evaluate interventions designed to improve health care access.

Real-time GIS data model and sensor web service platform for environmental data management.

Science.gov (United States)

Gong, Jianya; Geng, Jing; Chen, Zeqiang

2015-01-09

Effective environmental data management is meaningful for human health. In the past, environmental data management involved developing a specific environmental data management system, but this method often lacks real-time data retrieving and sharing/interoperating capability. With the development of information technology, a Geospatial Service Web method is proposed that can be employed for environmental data management. The purpose of this study is to determine a method to realize environmental data management under the Geospatial Service Web framework. A real-time GIS (Geographic Information System) data model and a Sensor Web service platform to realize environmental data management under the Geospatial Service Web framework are proposed in this study. The real-time GIS data model manages real-time data. The Sensor Web service platform is applied to support the realization of the real-time GIS data model based on the Sensor Web technologies. To support the realization of the proposed real-time GIS data model, a Sensor Web service platform is implemented. Real-time environmental data, such as meteorological data, air quality data, soil moisture data, soil temperature data, and landslide data, are managed in the Sensor Web service platform. In addition, two use cases of real-time air quality monitoring and real-time soil moisture monitoring based on the real-time GIS data model in the Sensor Web service platform are realized and demonstrated. The total time efficiency of the two experiments is 3.7 s and 9.2 s. The experimental results show that the method integrating real-time GIS data model and Sensor Web Service Platform is an effective way to manage environmental data under the Geospatial Service Web framework.

Using GIS-based methods of multicriteria analysis to construct socio-economic deprivation indices

Directory of Open Access Journals (Sweden)

Hayes Michael V

2007-05-01

Full Text Available Abstract Background Over the past several decades researchers have produced substantial evidence of a social gradient in a variety of health outcomes, rising from systematic differences in income, education, employment conditions, and family dynamics within the population. Social gradients in health are measured using deprivation indices, which are typically constructed from aggregated socio-economic data taken from the national census – a technique which dates back at least until the early 1970's. The primary method of index construction over the last decade has been a Principal Component Analysis. Seldom are the indices constructed from survey-based data sources due to the inherent difficulty in validating the subjectivity of the response scores. We argue that this very subjectivity can uncover spatial distributions of local health outcomes. Moreover, indication of neighbourhood socio-economic status may go underrepresented when weighted without expert opinion. In this paper we propose the use of geographic information science (GIS for constructing the index. We employ a GIS-based Order Weighted Average (OWA Multicriteria Analysis (MCA as a technique to validate deprivation indices that are constructed using more qualitative data sources. Both OWA and traditional MCA are well known and used methodologies in spatial analysis but have had little application in social epidemiology. Results A survey of British Columbia's Medical Health Officers (MHOs was used to populate the MCA-based index. Seven variables were selected and weighted based on the survey results. OWA variable weights assign both local and global weights to the index variables using a sliding scale, producing a range of variable scenarios. The local weights also provide leverage for controlling the level of uncertainty in the MHO response scores. This is distinct from traditional deprivation indices in that the weighting is simultaneously dictated by the original respondent scores

Integrated prediction based on GIS for sandstone-type uranium deposits in the northwest of Ordos Basin

International Nuclear Information System (INIS)

Han Shaoyang; Ke Dan; Hu Shuiqing; Guo Qingyin; Hou Huiqun

2005-01-01

The integrated prediction model of sandstone-type uranium deposits and its integrated evaluation methods as well as flow of the work based on GIS are studied. A software for extracting metallogenic information is also developed. A multi-source exploring information database is established in the northwest of Ordos Basin, and an integrated digital mineral deposit prospecting model of sandstone-type uranium deposits is designed based on GIS. The authors have completed metallogenic information extraction and integrated evaluation of sandstone-type uranium deposits based on GIS in the study area. Research results prove that the integrated prediction of sandstone-type uranium deposits based on GIS may further delineate prospective target areas rapidly and improve the predictive precision. (authors)

An overview of ecological monitoring based on geographic information system (GIS) and remote sensing (RS) technology in China

Science.gov (United States)

Zhang, Jing; Zhang, Jia; Du, Xiangyang; Kang, Hou; Qiao, Minjuan

2017-11-01

Due to the rapid development of human economy and society, the resulting ecological problems are becoming more and more prominent, and the dynamic monitoring of the various elements in the ecosystem has become the focus of the current research. For the complex structure and function of the ecological environment monitoring, advanced technical means should be adopted. With the development of spatial information technology, the ecological monitoring technology based on GIS and RS is becoming more and more perfect, and spatial analysis will play an important role in the field of environmental protection. Based on the GIS and RS technology, this paper analyzes the general centralized ecological monitoring model, and makes an objective analysis of the current ecological monitoring trend of China. These are important for the protection and management of ecological environment in China.

Design and implementation of information visualization system on science and technology industry based on GIS

Science.gov (United States)

Wu, Xiaofang; Jiang, Liushi

2011-02-01

Usually in the traditional science and technology information system, the only text and table form are used to manage the data, and the mathematic statistics method is applied to analyze the data. It lacks for the spatial analysis and management of data. Therefore, GIS technology is introduced to visualize and analyze the information data on science and technology industry. Firstly, by using the developed platform-microsoft visual studio 2005 and ArcGIS Engine, the information visualization system on science and technology industry based on GIS is built up, which implements various functions, such as data storage and management, inquiry, statistics, chart analysis, thematic map representation. It can show the change of science and technology information from the space and time axis intuitively. Then, the data of science and technology in Guangdong province are taken as experimental data and are applied to the system. And by considering the factors of humanities, geography and economics so on, the situation and change tendency of science and technology information of different regions are analyzed and researched, and the corresponding suggestion and method are brought forward in order to provide the auxiliary support for development of science and technology industry in Guangdong province.

A GIS-based tool for bioaccumulation risk analysis and its application to study polychlorinated biphenyls in the Great Lakes

Directory of Open Access Journals (Sweden)

Fernanda P. Maciel

2018-01-01

Full Text Available This paper presents a GIS-based tool named Arc-BEST (Bioaccumulation Evaluation Screening Tool to perform spatially distributed bioaccumulation risk analyses. Estimating bioaccumulation risk is important to help predict potentially adverse effects from contaminants on ecosystems and human health, which are key factors in the development of sound public policy. Arc-BEST is based on the BEST model in the U.S. Army Corps of Engineers BRAMS (Bioaccumulation Risk Assessment Modeling System software, released in 2012. It predicts concentration of concern contaminants in predators’ tissues from concentrations in organisms at the bottom of the food chain, and corresponding bioaccumulation factors. Additionally, it estimates carcinogenic and non-carcinogenic risks for humans that consume those species. The greatest contribution of Arc-BEST is that it enables the automated use of digital spatial data sets, which improves model creation speed, analysis and visualization of results, and comparison and cross-referencing with other geographic datasets. Furthermore, the model was improved to consider up to four trophic levels. The code is written in Python and is open-source. In this work Arc-BEST is used as part of a screening-level risk assessment process in order to identify hot spots where further studies and monitoring should be performed to ensure humans and ecosystems health. The tool is successfully applied to a case study in the Laurentian Great Lakes, where long-term effects of polychlorinated biphenyls (PCBs is performed, based on measured concentrations in zebra mussels (Dreissena polymorpha, and local bioaccumulation factors from previous studies. Zebra mussels have a great filtration capacity and high bioconcentration rates, increasing the bioavailability of contaminants for predator species. PCBs concentrations in different-level predators are predicted. Furthermore, health risks for humans that consume sport fish are estimated for various

"To me it's just another tool to help understand the evidence": public health decision-makers' perceptions of the value of geographical information systems (GIS).

Science.gov (United States)

Joyce, Kerry

2009-09-01

While geographical information systems (GIS) have applications in a range of diverse fields, they remain underused by decision-makers in health settings. Through analysis of data captured in semi-structured interviews, the paper explores four thematic areas (the ontological, power, functionality and collaboration discourses) to understand how GIS are perceived and valued by public health decision-makers. The findings suggest that although GIS are viewed as useful tools to inform decision-making, they are in no way a panacea for practice. Participants' concerns that GIS outputs can potentially be misinterpreted or used erroneously might partly explain resistance to their use. GIS are, therefore, likely to be most effective in decision-making when applied in a multi-disciplinary context to facilitate sharing of data, knowledge and expertise across the public health landscape.

Study of Earthquake Disaster Prediction System of Langfang city Based on GIS

Science.gov (United States)

Huang, Meng; Zhang, Dian; Li, Pan; Zhang, YunHui; Zhang, RuoFei

2017-07-01

In this paper, according to the status of China’s need to improve the ability of earthquake disaster prevention, this paper puts forward the implementation plan of earthquake disaster prediction system of Langfang city based on GIS. Based on the GIS spatial database, coordinate transformation technology, GIS spatial analysis technology and PHP development technology, the seismic damage factor algorithm is used to predict the damage of the city under different intensity earthquake disaster conditions. The earthquake disaster prediction system of Langfang city is based on the B / S system architecture. Degree and spatial distribution and two-dimensional visualization display, comprehensive query analysis and efficient auxiliary decision-making function to determine the weak earthquake in the city and rapid warning. The system has realized the transformation of the city’s earthquake disaster reduction work from static planning to dynamic management, and improved the city’s earthquake and disaster prevention capability.

Developing Hydrogeological Site Characterization Strategies based on Human Health Risk

Science.gov (United States)

de Barros, F.; Rubin, Y.; Maxwell, R. M.

2013-12-01

In order to provide better sustainable groundwater quality management and minimize the impact of contamination in humans, improved understanding and quantification of the interaction between hydrogeological models, geological site information and human health are needed. Considering the joint influence of these components in the overall human health risk assessment and the corresponding sources of uncertainty aid decision makers to better allocate resources in data acquisition campaigns. This is important to (1) achieve remediation goals in a cost-effective manner, (2) protect human health and (3) keep water supplies clean in order to keep with quality standards. Such task is challenging since a full characterization of the subsurface is unfeasible due to financial and technological constraints. In addition, human exposure and physiological response to contamination are subject to uncertainty and variability. Normally, sampling strategies are developed with the goal of reducing uncertainty, but less often they are developed in the context of their impacts on the overall system uncertainty. Therefore, quantifying the impact from each of these components (hydrogeological, behavioral and physiological) in final human health risk prediction can provide guidance for decision makers to best allocate resources towards minimal prediction uncertainty. In this presentation, a multi-component human health risk-based framework is presented which allows decision makers to set priorities through an information entropy-based visualization tool. Results highlight the role of characteristic length-scales characterizing flow and transport in determining data needs within an integrated hydrogeological-health framework. Conditions where uncertainty reduction in human health risk predictions may benefit from better understanding of the health component, as opposed to a more detailed hydrogeological characterization, are also discussed. Finally, results illustrate how different dose

GIS-Based bivariate statistical techniques for groundwater potential ...

Indian Academy of Sciences (India)

24

This study shows the potency of two GIS-based data driven bivariate techniques namely ... In the view of these weaknesses , there is a strong requirement for reassessment of .... Font color: Text 1, Not Expanded by / Condensed by , ...... West Bengal (India) using remote sensing, geographical information system and multi-.

GIS and the Social Sciences : Theory and Applications

NARCIS (Netherlands)

Ballas, Dimitris; Clarke, Graham; Franklin, Rachel S.; Newing, Andy

2017-01-01

GIS and the Social Sciences offers a uniquely social science approach on the theory and application of GIS with a range of modern examples. It explores how human geography can engage with a variety of important policy issues through linking together GIS and spatial analysis, and demonstrates the

GIS-BASED PREDICTION OF HURRICANE FLOOD INUNDATION

Energy Technology Data Exchange (ETDEWEB)

JUDI, DAVID [Los Alamos National Laboratory; KALYANAPU, ALFRED [Los Alamos National Laboratory; MCPHERSON, TIMOTHY [Los Alamos National Laboratory; BERSCHEID, ALAN [Los Alamos National Laboratory

2007-01-17

A simulation environment is being developed for the prediction and analysis of the inundation consequences for infrastructure systems from extreme flood events. This decision support architecture includes a GIS-based environment for model input development, simulation integration tools for meteorological, hydrologic, and infrastructure system models and damage assessment tools for infrastructure systems. The GIS-based environment processes digital elevation models (30-m from the USGS), land use/cover (30-m NLCD), stream networks from the National Hydrography Dataset (NHD) and soils data from the NRCS (STATSGO) to create stream network, subbasins, and cross-section shapefiles for drainage basins selected for analysis. Rainfall predictions are made by a numerical weather model and ingested in gridded format into the simulation environment. Runoff hydrographs are estimated using Green-Ampt infiltration excess runoff prediction and a 1D diffusive wave overland flow routing approach. The hydrographs are fed into the stream network and integrated in a dynamic wave routing module using the EPA's Storm Water Management Model (SWMM) to predict flood depth. The flood depths are then transformed into inundation maps and exported for damage assessment. Hydrologic/hydraulic results are presented for Tropical Storm Allison.

Methodology for a GIS-based damage assessment for researchers following large scale disasters

Science.gov (United States)

Crawford, Patrick Shane

The 1990s were designated the International Decade for Natural Disaster Reduction by the United Nations General Assembly. This push for decrease of loss of life, property destruction, and social and economic disruption brought advancements in disaster management, including damage assessment. Damage assessment in the wake of natural and manmade disasters is a useful tool for government agencies, insurance companies, and researchers. As technologies evolve damage assessment processes constantly evolve as well. Alongside the advances in Geographic Information Systems (GIS), remote sensing, and Global Positioning System (GPS) technology, as well as the growing awareness of the needs of a standard operating procedure for GIS-based damage assessment and a need to make the damage assessment process as quick and accurate as possible, damage assessment procedures are becoming easier to execute and the results are becoming more accurate and robust. With these technological breakthroughs, multi-disciplinary damage assessment reconnaissance teams have become more efficient in their assessment methods through better organization and more robust through addition of new datasets. Damage assessment personnel are aided by software tools that offer high-level analysis and increasingly rapid damage assessment methods. GIS software has advanced the damage assessment methods of these teams by combining remotely sensed aerial imagery, GPS, and other technologies to expand the uses of the data. GIS allows researchers to use aerial imagery to show field collected data in the geographic location that it was collected so that information can be revisited, measurements can be taken, and data can be disseminated to other researchers and the public. The GIS-based data available to the reconnaissance team includes photographs of damage, worksheets, calculations, voice messages collected while studying the affected area, and many other datasets which are based on the type of disaster and the

GIS-Based Population Model Applied to Nevada Transportation Routes

International Nuclear Information System (INIS)

Mills, G.S.; Neuhauser, K.S.

1999-01-01

Recently, a model based on geographic information system (GIS) processing of US Census Block data has made high-resolution population analysis for transportation risk analysis technically and economically feasible. Population density bordering each kilometer of a route may be tabulated with specific route sections falling into each of three categories (Rural, Suburban or Urban) identified for separate risk analysis. In addition to the improvement in resolution of Urban areas along a route, the model provides a statistically-based correction to population densities in Rural and Suburban areas where Census Block dimensions may greatly exceed the 800-meter scale of interest. A semi-automated application of the GIS model to a subset of routes in Nevada (related to the Yucca Mountain project) are presented, and the results compared to previous models including a model based on published Census and other data. These comparisons demonstrate that meaningful improvement in accuracy and specificity of transportation risk analyses is dependent on correspondingly accurate and geographically-specific population density data

GIS Teacher Training: Empirically-Based Indicators of Effectiveness

Science.gov (United States)

Höhnle, Steffen; Fögele, Janis; Mehren, Rainer; Schubert, Jan Christoph

2016-01-01

In spite of various actions, the implementation of GIS (geographic information systems) in German schools is still very low. In the presented research, teaching experts as well as teaching novices were presented with empirically based constraints for implementation stemming from an earlier survey. In the process of various group discussions, the…

Development of geophysical and geochemical data processing software based on component GIS

International Nuclear Information System (INIS)

Ke Dan; Yu Xiang; Wu Qubo; Han Shaoyang; Li Xi

2013-01-01

Based on component GIS and mixed programming techniques, a software which combines the basic GIS functions, conventional and unconventional data process methods for the regional geophysical and geochemical data together, is designed and developed. The software has many advantages, such as friendly interface, easy to use and utility functions and provides a useful platform for regional geophysical and geochemical data processing. (authors)

GIS-Based Planning and Modeling for Renewable Energy: Challenges and Future Research Avenues

Directory of Open Access Journals (Sweden)

Bernd Resch

2014-05-01

Full Text Available In the face of the broad political call for an “energy turnaround”, we are currently witnessing three essential trends with regard to energy infrastructure planning, energy generation and storage: from planned production towards fluctuating production on the basis of renewable energy sources, from centralized generation towards decentralized generation and from expensive energy carriers towards cost-free energy carriers. These changes necessitate considerable modifications of the energy infrastructure. Even though most of these modifications are inherently motivated by geospatial questions and challenges, the integration of energy system models and Geographic Information Systems (GIS is still in its infancy. This paper analyzes the shortcomings of previous approaches in using GIS in renewable energy-related projects, extracts distinct challenges from these previous efforts and, finally, defines a set of core future research avenues for GIS-based energy infrastructure planning with a focus on the use of renewable energy. These future research avenues comprise the availability base data and their “geospatial awareness”, the development of a generic and unified data model, the usage of volunteered geographic information (VGI and crowdsourced data in analysis processes, the integration of 3D building models and 3D data analysis, the incorporation of network topologies into GIS, the harmonization of the heterogeneous views on aggregation issues in the fields of energy and GIS, fine-grained energy demand estimation from freely-available data sources, decentralized storage facility planning, the investigation of GIS-based public participation mechanisms, the transition from purely structural to operational planning, data privacy aspects and, finally, the development of a new dynamic power market design.

Assembly and concept of a web-based GIS within the paleolimnological project CONTINENT (Lake Baikal, Russia)

OpenAIRE

B. Heim; Jens Klump; N. Fagel; Hedi Oberhänsli

2008-01-01

Web-based Geographical Information Systems (GIS) are excellent tools within interdisciplinary and multi-national geoscience projects to exchange and visualize project data. The web-based GIS presented in this paper was designed for the paleolimnological project 'High-resolution CONTINENTal paleoclimate record in Lake Baikal' (CONTINENT) (Lake Baikal, Siberia, Russia) to allow the interactive handling of spatial data. The GIS database combines project data (core positions, sample positions, th...

EpiScanGIS: an online geographic surveillance system for meningococcal disease

Directory of Open Access Journals (Sweden)

Albert Jürgen

2008-07-01

Full Text Available Abstract Background Surveillance of infectious diseases increasingly relies on Geographic Information Systems (GIS. The integration of pathogen fine typing data in dynamic systems and visualization of spatio-temporal clusters are a technical challenge for system development. Results An online geographic information system (EpiScanGIS based on open source components has been launched in Germany in May 2006 for real time provision of meningococcal typing data in conjunction with demographic information (age, incidence, population density. Spatio-temporal clusters of disease detected by computer assisted cluster analysis (SaTScan™ are visualized on maps. EpiScanGIS enables dynamic generation of animated maps. The system is based on open source components; its architecture is open for other infectious agents and geographic regions. EpiScanGIS is available at http://www.episcangis.org, and currently has 80 registered users, mostly from the public health service in Germany. At present more than 2,900 cases of invasive meningococcal disease are stored in the database (data as of June 3, 2008. Conclusion EpiScanGIS exemplifies GIS applications and early-warning systems in laboratory surveillance of infectious diseases.

GIS-based spatial statistical analysis of risk areas for liver flukes in Surin Province of Thailand.

Science.gov (United States)

Rujirakul, Ratana; Ueng-arporn, Naporn; Kaewpitoon, Soraya; Loyd, Ryan J; Kaewthani, Sarochinee; Kaewpitoon, Natthawut

2015-01-01

It is urgently necessary to be aware of the distribution and risk areas of liver fluke, Opisthorchis viverrini, for proper allocation of prevention and control measures. This study aimed to investigate the human behavior, and environmental factors influencing the distribution in Surin Province of Thailand, and to build a model using stepwise multiple regression analysis with a geographic information system (GIS) on environment and climate data. The relationship between the human behavior, attitudes (R Square=0.878, and, Adjust R Square=0.849. By GIS analysis, we found Si Narong, Sangkha, Phanom Dong Rak, Mueang Surin, Non Narai, Samrong Thap, Chumphon Buri, and Rattanaburi to have the highest distributions in Surin province. In conclusion, the combination of GIS and statistical analysis can help simulate the spatial distribution and risk areas of liver fluke, and thus may be an important tool for future planning of prevention and control measures.

GIS-based assessment of landslide susceptibility using certainty ...

Indian Academy of Sciences (India)

tion systems (GIS) using different models. Many of these ... as spatial multicriteria decision analysis (MCDA) approach ... 2013), support vec- ... Landslide susceptibility assessment using mathematical methods in GIS, Qianyang China 1401.

Web GIS in practice IV: publishing your health maps and connecting to remote WMS sources using the Open Source UMN MapServer and DM Solutions MapLab

Directory of Open Access Journals (Sweden)

Honda Kiyoshi

2006-01-01

Full Text Available Abstract Open Source Web GIS software systems have reached a stage of maturity, sophistication, robustness and stability, and usability and user friendliness rivalling that of commercial, proprietary GIS and Web GIS server products. The Open Source Web GIS community is also actively embracing OGC (Open Geospatial Consortium standards, including WMS (Web Map Service. WMS enables the creation of Web maps that have layers coming from multiple different remote servers/sources. In this article we present one easy to implement Web GIS server solution that is based on the Open Source University of Minnesota (UMN MapServer. By following the accompanying step-by-step tutorial instructions, interested readers running mainstream Microsoft® Windows machines and with no prior technical experience in Web GIS or Internet map servers will be able to publish their own health maps on the Web and add to those maps additional layers retrieved from remote WMS servers. The 'digital Asia' and 2004 Indian Ocean tsunami experiences in using free Open Source Web GIS software are also briefly described.

A web GIS based integrated flood assessment modeling tool for coastal urban watersheds

Science.gov (United States)

Kulkarni, A. T.; Mohanty, J.; Eldho, T. I.; Rao, E. P.; Mohan, B. K.

2014-03-01

Urban flooding has become an increasingly important issue in many parts of the world. In this study, an integrated flood assessment model (IFAM) is presented for the coastal urban flood simulation. A web based GIS framework has been adopted to organize the spatial datasets for the study area considered and to run the model within this framework. The integrated flood model consists of a mass balance based 1-D overland flow model, 1-D finite element based channel flow model based on diffusion wave approximation and a quasi 2-D raster flood inundation model based on the continuity equation. The model code is written in MATLAB and the application is integrated within a web GIS server product viz: Web Gram Server™ (WGS), developed at IIT Bombay, using Java, JSP and JQuery technologies. Its user interface is developed using open layers and the attribute data are stored in MySQL open source DBMS. The model is integrated within WGS and is called via Java script. The application has been demonstrated for two coastal urban watersheds of Navi Mumbai, India. Simulated flood extents for extreme rainfall event of 26 July, 2005 in the two urban watersheds of Navi Mumbai city are presented and discussed. The study demonstrates the effectiveness of the flood simulation tool in a web GIS environment to facilitate data access and visualization of GIS datasets and simulation results.

A study on spatial decision support systems for HIV/AIDS prevention based on COM GIS technology

Science.gov (United States)

Yang, Kun; Luo, Huasong; Peng, Shungyun; Xu, Quanli

2007-06-01

Based on the deeply analysis of the current status and the existing problems of GIS technology applications in Epidemiology, this paper has proposed the method and process for establishing the spatial decision support systems of AIDS epidemic prevention by integrating the COM GIS, Spatial Database, GPS, Remote Sensing, and Communication technologies, as well as ASP and ActiveX software development technologies. One of the most important issues for constructing the spatial decision support systems of AIDS epidemic prevention is how to integrate the AIDS spreading models with GIS. The capabilities of GIS applications in the AIDS epidemic prevention have been described here in this paper firstly. Then some mature epidemic spreading models have also been discussed for extracting the computation parameters. Furthermore, a technical schema has been proposed for integrating the AIDS spreading models with GIS and relevant geospatial technologies, in which the GIS and model running platforms share a common spatial database and the computing results can be spatially visualized on Desktop or Web GIS clients. Finally, a complete solution for establishing the decision support systems of AIDS epidemic prevention has been offered in this paper based on the model integrating methods and ESRI COM GIS software packages. The general decision support systems are composed of data acquisition sub-systems, network communication sub-systems, model integrating sub-systems, AIDS epidemic information spatial database sub-systems, AIDS epidemic information querying and statistical analysis sub-systems, AIDS epidemic dynamic surveillance sub-systems, AIDS epidemic information spatial analysis and decision support sub-systems, as well as AIDS epidemic information publishing sub-systems based on Web GIS.

Cloud Computing and Its Applications in GIS

Science.gov (United States)

Kang, Cao

2011-12-01

Cloud computing is a novel computing paradigm that offers highly scalable and highly available distributed computing services. The objectives of this research are to: 1. analyze and understand cloud computing and its potential for GIS; 2. discover the feasibilities of migrating truly spatial GIS algorithms to distributed computing infrastructures; 3. explore a solution to host and serve large volumes of raster GIS data efficiently and speedily. These objectives thus form the basis for three professional articles. The first article is entitled "Cloud Computing and Its Applications in GIS". This paper introduces the concept, structure, and features of cloud computing. Features of cloud computing such as scalability, parallelization, and high availability make it a very capable computing paradigm. Unlike High Performance Computing (HPC), cloud computing uses inexpensive commodity computers. The uniform administration systems in cloud computing make it easier to use than GRID computing. Potential advantages of cloud-based GIS systems such as lower barrier to entry are consequently presented. Three cloud-based GIS system architectures are proposed: public cloud- based GIS systems, private cloud-based GIS systems and hybrid cloud-based GIS systems. Public cloud-based GIS systems provide the lowest entry barriers for users among these three architectures, but their advantages are offset by data security and privacy related issues. Private cloud-based GIS systems provide the best data protection, though they have the highest entry barriers. Hybrid cloud-based GIS systems provide a compromise between these extremes. The second article is entitled "A cloud computing algorithm for the calculation of Euclidian distance for raster GIS". Euclidean distance is a truly spatial GIS algorithm. Classical algorithms such as the pushbroom and growth ring techniques require computational propagation through the entire raster image, which makes it incompatible with the distributed nature

Evaluating the Implementation and Effectiveness of GIS-Based Application in Secondary School Geography Lessons

OpenAIRE

Ali Ali

2008-01-01

The purpose of the study was to investigate the barriers preventing the use of Geographic Information Systems (GIS) in secondary school geography lessons and to determine its effectiveness on students success. A workshop focusing on ways to implement GIS-based application in the classroom for 14 teachers from nine high schools was conducted in 2006. The teachers were given GIS software, digital data for an application, and the necessary written documents describing the application. Due to var...

INTEGRATING MULTIPLE CRITERIA EVALUATION AND GIS IN ECOTOURISM: A REVIEW

Directory of Open Access Journals (Sweden)

Z. H. Mohd

2016-09-01

Full Text Available The concept of 'Eco-tourism' is increasingly heard in recent decades. Ecotourism is one adventure that environmentally responsible intended to appreciate the nature experiences and cultures. Ecotourism should have low impact on environment and must contribute to the prosperity of local residents. This article reviews the use of Multiple Criteria Evaluation (MCE and Geographic Information System (GIS in ecotourism. Multiple criteria evaluation mostly used to land suitability analysis or fulfill specific objectives based on various attributes that exist in the selected area. To support the process of environmental decision making, the application of GIS is used to display and analysis the data through Analytic Hierarchy Process (AHP. Integration between MCE and GIS tool is important to determine the relative weight for the criteria used objectively. With the MCE method, it can resolve the conflict between recreation and conservation which is to minimize the environmental and human impact. Most studies evidences that the GIS-based AHP as a multi criteria evaluation is a strong and effective in tourism planning which can aid in the development of ecotourism industry effectively.

Integrating Multiple Criteria Evaluation and GIS in Ecotourism: a Review

Science.gov (United States)

Mohd, Z. H.; Ujang, U.

2016-09-01

The concept of 'Eco-tourism' is increasingly heard in recent decades. Ecotourism is one adventure that environmentally responsible intended to appreciate the nature experiences and cultures. Ecotourism should have low impact on environment and must contribute to the prosperity of local residents. This article reviews the use of Multiple Criteria Evaluation (MCE) and Geographic Information System (GIS) in ecotourism. Multiple criteria evaluation mostly used to land suitability analysis or fulfill specific objectives based on various attributes that exist in the selected area. To support the process of environmental decision making, the application of GIS is used to display and analysis the data through Analytic Hierarchy Process (AHP). Integration between MCE and GIS tool is important to determine the relative weight for the criteria used objectively. With the MCE method, it can resolve the conflict between recreation and conservation which is to minimize the environmental and human impact. Most studies evidences that the GIS-based AHP as a multi criteria evaluation is a strong and effective in tourism planning which can aid in the development of ecotourism industry effectively.

Assessment of Industry-Induced Urban Human Health Risks Related to Benzo[a]pyrene based on a Multimedia Fugacity Model: Case Study of Nanjing, China

Directory of Open Access Journals (Sweden)

Linyu Xu

2015-05-01

Full Text Available Large amounts of organic pollutants emitted from industries have accumulated and caused serious human health risks, especially in urban areas with rapid industrialization. This paper focused on the carcinogen benzo[a]pyrene (BaP from industrial effluent and gaseous emissions, and established a multi-pathway exposure model based on a Level IV multimedia fugacity model to analyze the human health risks in a city that has undergone rapid industrialization. In this study, GIS tools combined with land-use data was introduced to analyze smaller spatial scales so as to enhance the spatial resolution of the results. An uncertainty analysis using a Monte Carlo simulation was also conducted to illustrate the rationale of the probabilistic assessment mode rather than deterministic assessment. Finally, the results of the case study in Nanjing, China indicated the annual average human cancer risk induced by local industrial emissions during 2002–2008 (lowest at 1.99´10–6 in 2008 and highest at 3.34´10–6 in 2004, which was lower than the USEPA prescriptive level (1´10–6–1´10–4 but cannot be neglected in the long term. The study results could not only instruct the BaP health risk management but also help future health risk prediction and control.

Teaching with ArcGIS Pro

OpenAIRE

Theller, Larry

2016-01-01

For Fall semester 2016 the ABE department moved the course ASM 540 Basic GIS from ArcGIS Desktop 10.2 to ArcGIS Pro 1.3. This software from ESRI has a completely new look and feel, (ribbon-based rather than cascading menus) and is a true 64 bit application, capable of multi-threading, and built on Python 3. After ArcGIS Desktop 10.5 is released, desktop ends and the future release will be ArcGIS Pro; so it makes sense to switch sooner rather than later. This talk will discuss some issues and...

GIS-based bivariate statistical techniques for groundwater potential ...

Indian Academy of Sciences (India)

Ali Haghizadeh

2017-11-23

Nov 23, 2017 ... regions. This study shows the potency of two GIS-based data driven ... growth of these tools has also prepared another ..... Urban. 30467. 3. 0.06. 0.20. 0.74. 0.80. −0.64. Distance from road ..... and artificial neural networks for potential groundwater .... ping: A case study at Mehran region, Iran; Catena 137.

Assessment of ecological passages along road networks within the Mediterranean forest using GIS-based multi criteria evaluation approach.

Science.gov (United States)

Gülci, Sercan; Akay, Abdullah Emin

2015-12-01

Major roads cause barrier effect and fragmentation on wildlife habitats that are suitable places for feeding, mating, socializing, and hiding. Due to wildlife collisions (Wc), human-wildlife conflicts result in lost lives and loss of biodiversity. Geographical information system (GIS)-based multi criteria evaluation (MCE) methods have been successfully used in short-term planning of road networks considering wild animals. Recently, wildlife passages have been effectively utilized as road engineering structures provide quick and certain solutions for traffic safety and wildlife conservation problems. GIS-based MCE methods provide decision makers with optimum location for ecological passages based on habitat suitability models (HSMs) that classify the areas based on ecological requirements of target species. In this study, ecological passages along Motorway 52 within forested areas in Mediterranean city of Osmaniye in Turkey were evaluated. Firstly, HSM coupled with nine eco-geographic decision variables were developed based on ecological requirements of roe deer (Capreolus capreolus) that were chosen as target species. Then specified decision variables were evaluated using GIS-based weighted linear combination (WLC) method to estimate movement corridors and mitigation points along the motorway. In the solution process, two linkage nodes were evaluated for eco-passages which were determined based on the least-cost movement corridor intersecting with the motorway. One of the passages was identified as a natural wildlife overpass while the other was suggested as underpass construction. The results indicated that computer-based models provide accurate and quick solutions for positioning ecological passages to reduce environmental effects of road networks on wild animals.

GIS-based Approaches to Catchment Area Analyses of Mass Transit

DEFF Research Database (Denmark)

Andersen, Jonas Lohmann Elkjær; Landex, Alex

2009-01-01

Catchment area analyses of stops or stations are used to investigate potential number of travelers to public transportation. These analyses are considered a strong decision tool in the planning process of mass transit especially railroads. Catchment area analyses are GIS-based buffer and overlay...... analyses with different approaches depending on the desired level of detail. A simple but straightforward approach to implement is the Circular Buffer Approach where catchment areas are circular. A more detailed approach is the Service Area Approach where catchment areas are determined by a street network...... search to simulate the actual walking distances. A refinement of the Service Area Approach is to implement additional time resistance in the network search to simulate obstacles in the walking environment. This paper reviews and compares the different GIS-based catchment area approaches, their level...

Cell Based GIS as Cellular Automata for Disaster Spreading Predictions and Required Data Systems

Directory of Open Access Journals (Sweden)

Kohei Arai

2013-03-01

Full Text Available A method for prediction and simulation based on the Cell Based Geographic Information System(GIS as Cellular Automata (CA is proposed together with required data systems, in particular metasearch engine usage in an unified way. It is confirmed that the proposed cell based GIS as CA has flexible usage of the attribute information that is attached to the cell in concert with location information and does work for disaster spreading simulation and prediction.

A GIS-based atmospheric dispersion model for pollutants emitted by complex source areas.

Science.gov (United States)

Teggi, Sergio; Costanzini, Sofia; Ghermandi, Grazia; Malagoli, Carlotta; Vinceti, Marco

2018-01-01

Gaussian dispersion models are widely used to simulate the concentrations and deposition fluxes of pollutants emitted by source areas. Very often, the calculation time limits the number of sources and receptors and the geometry of the sources must be simple and without holes. This paper presents CAREA, a new GIS-based Gaussian model for complex source areas. CAREA was coded in the Python language, and is largely based on a simplified formulation of the very popular and recognized AERMOD model. The model allows users to define in a GIS environment thousands of gridded or scattered receptors and thousands of complex sources with hundreds of vertices and holes. CAREA computes ground level, or near ground level, concentrations and dry deposition fluxes of pollutants. The input/output and the runs of the model can be completely managed in GIS environment (e.g. inside a GIS project). The paper presents the CAREA formulation and its applications to very complex test cases. The tests shows that the processing time are satisfactory and that the definition of sources and receptors and the output retrieval are quite easy in a GIS environment. CAREA and AERMOD are compared using simple and reproducible test cases. The comparison shows that CAREA satisfactorily reproduces AERMOD simulations and is considerably faster than AERMOD. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of integrated evaluation information system for sandstone-hosted uranium deposits based on ComGIS

International Nuclear Information System (INIS)

Ke Dan; Han Shaoyang; Hou Huiqun; Hu Shuiqing

2006-01-01

Component GIS owns many merits such as flexible function and easy to be used, which makes it very suitable for the development of professional GIS application system in geoscience field. During the process of exploration and evaluation for uranium resources, computer application system has been a powerful tool owning to the following functions: professional processing, management and storage of data, spatial analysis, visualization and mapping, etc. In this paper technological routine is presented for the development of integrated evaluation information system for sandstone-hosted uranium deposits based on ArcGIS Engine. General GIS functions can be realized with ArcGIS Engine easily and quickly, the developers could concentrate their attentions on developing professional functions, which will shorten the developing period and make the system more efficient. It is showed that the system developed on ArcGIS Engine platform is stable in operation, flexible in functions and professional in application. (authors)

A GIS-based Power Transmission Management Information System

Institute of Scientific and Technical Information of China (English)

2010-01-01

<正>Based on analyzing the shortcomings of electric power enterprise in traditional operation pattern,this paper combines components GIS with the application of management information system,and uses the structure which unifies three layers C/S and B/S.Also,proposed using the GPS intellectualization patrol.This may be useful to guarantees the transmission line’s operation to be safe and stable.

Integration agent-based models and GIS as a virtual urban dynamic laboratory

Science.gov (United States)

Chen, Peng; Liu, Miaolong

2007-06-01

Based on the Agent-based Model and spatial data model, a tight-coupling integrating method of GIS and Agent-based Model (ABM) is to be discussed in this paper. The use of object-orientation for both spatial data and spatial process models facilitates their integration, which can allow exploration and explanation of spatial-temporal phenomena such as urban dynamic. In order to better understand how tight coupling might proceed and to evaluate the possible functional and efficiency gains from such a tight coupling, the agent-based model and spatial data model are discussed, and then the relationships affecting spatial data model and agent-based process models interaction. After that, a realistic crowd flow simulation experiment is presented. Using some tools provided by general GIS systems and a few specific programming languages, a new software system integrating GIS and MAS as a virtual laboratory applicable for simulating pedestrian flows in a crowd activity centre has been developed successfully. Under the environment supported by the software system, as an applicable case, a dynamic evolution process of the pedestrian's flows (dispersed process for the spectators) in a crowds' activity center - The Shanghai Stadium has been simulated successfully. At the end of the paper, some new research problems have been pointed out for the future.

From Workshop to Classroom: Bridging GIS Success

Science.gov (United States)

Stonier, Francis; Hong, Jung Eun

2016-01-01

This article shares the first-time geographic information system (GIS) experiences of two advanced placement human geography classes. The teacher had participated in a summer GIS workshop and then brought those skills into her classroom for the students' benefit. Eighteen students shared their experiences researching their family history, working…

Analysis of open source GIS software

OpenAIRE

Božnis, Andrius

2006-01-01

GIS is one of the most perspective information technology sciences sphere. GIS conjuncts the digital image analysis and data base systems. This makes GIS wide applicable and very high skills demanding system. There is a lot of commercial GIS software which is well advertised and which functionality is pretty well known, while open source software is forgotten. In this diploma work is made analysis of available open source GIS software on the Internet, in the scope of different projects interr...

Creation of a Web-Based GIS Server and Custom Geoprocessing Tools for Enhanced Hydrologic Applications

Science.gov (United States)

Welton, B.; Chouinard, K.; Sultan, M.; Becker, D.; Milewski, A.; Becker, R.

2010-12-01

Rising populations in the arid and semi arid parts of the World are increasing the demand for fresh water supplies worldwide. Many data sets needed for assessment of hydrologic applications across vast regions of the world are expensive, unpublished, difficult to obtain, or at varying scales which complicates their use. Fortunately, this situation is changing with the development of global remote sensing datasets and web-based platforms such as GIS Server. GIS provides a cost effective vehicle for comparing, analyzing, and querying a variety of spatial datasets as geographically referenced layers. We have recently constructed a web-based GIS, that incorporates all relevant geological, geochemical, geophysical, and remote sensing data sets that were readily used to identify reservoir types and potential well locations on local and regional scales in various tectonic settings including: (1) extensional environment (Red Sea rift), (2) transcurrent fault system (Najd Fault in the Arabian-Nubian Shield), and (3) compressional environments (Himalayas). The web-based GIS could also be used to detect spatial and temporal trends in precipitation, recharge, and runoff in large watersheds on local, regional, and continental scales. These applications were enabled through the construction of a web-based ArcGIS Server with Google Map’s interface and the development of customized geoprocessing tools. ArcGIS Server provides out-of-the-box setups that are generic in nature. This platform includes all of the standard web based GIS tools (e.g. pan, zoom, identify, search, data querying, and measurement). In addition to the standard suite of tools provided by ArcGIS Server an additional set of advanced data manipulation and display tools was also developed to allow for a more complete and customizable view of the area of interest. The most notable addition to the standard GIS Server tools is the custom on-demand geoprocessing tools (e.g., graph, statistical functions, custom raster

CLOUD BASED WEB 3D GIS TAIWAN PLATFORM

Directory of Open Access Journals (Sweden)

W.-F. Tsai

2012-09-01

Full Text Available This article presents the status of the web 3D GIS platform, which has been developed in the National Applied Research Laboratories. The purpose is to develop a global earth observation 3D GIS platform for applications to disaster monitoring and assessment in Taiwan. For quick response to preliminary and detailed assessment after a natural disaster occurs, the web 3D GIS platform is useful to access, transfer, integrate, display and analyze the multi-scale huge data following the international OGC standard. The framework of cloud service for data warehousing management and efficiency enhancement using VMWare is illustrated in this article.

Using GIS to evaluate a fire safety program in North Carolina.

Science.gov (United States)

Dudley, Thomas; Creppage, Kathleen; Shanahan, Meghan; Proescholdbell, Scott

2013-10-01

Evaluating program impact is a critical aspect of public health. Utilizing Geographic Information Systems (GIS) is a novel way to evaluate programs which try to reduce residential fire injuries and deaths. The purpose of this study is to demonstrate the application of GIS within the evaluation of a smoke alarm installation program in North Carolina. This approach incorporates national fire incident data which, when linked with program data, provides a clear depiction of the 10 years impact of the Get Alarmed, NC! program and estimates the number of potential lives saved. We overlapped Get Alarmed, NC! program installation data with national information on fires using GIS to identify homes that experienced a fire after an alarm was installed and calculated potential lives saved based on program documentation and average housing occupancy. We found that using GIS was an efficient and quick way to match addresses from two distinct sources. From this approach we estimated that between 221 and 384 residents were potentially saved due to alarms installed in their homes by Get Alarmed, NC!. Compared with other program evaluations that require intensive and costly participant telephone surveys and/or in-person interviews, the GIS approach is inexpensive, quick, and can easily analyze large disparate datasets. In addition, it can be used to help target the areas most at risk from the onset. These benefits suggest that by incorporating previously unutilized data, the GIS approach has the potential for broader applications within public health program evaluation.

Facilitating Spatial Thinking in World Geography Using Web-Based GIS

Science.gov (United States)

Jo, Injeong; Hong, Jung Eun; Verma, Kanika

2016-01-01

Advocates for geographic information system (GIS) education contend that learning about GIS promotes students' spatial thinking. Empirical studies are still needed to elucidate the potential of GIS as an instructional tool to support spatial thinking in other geography courses. Using a non-equivalent control group research design, this study…

IDENTIFYING HIGH-RISK POPULATIONS OF TUBERCULOSIS USING ENVIRONMENTAL FACTORS AND GIS BASED MULTI-CRITERIA DECISION MAKING METHOD

Directory of Open Access Journals (Sweden)

A. R. Abdul Rasam

2016-09-01

Full Text Available Development of an innovative method to enhance the detection of tuberculosis (TB in Malaysia is the latest agenda of the Ministry of Health. Therefore, a geographical information system (GIS based index model is proposed as an alternative method for defining potential high-risk areas of local TB cases at Section U19, Shah Alam. It is adopted a spatial multi-criteria decision making (MCDM method for ranking environmental risk factors of the disease in a standardised five-score scale. Scale 1 and 5 illustrate the lowest and the highest risk of the TB spread respectively, while scale from 3 to 5 is included as a potential risk level. These standardised scale values are then combined with expert normalised weights (0 to 1 to calculate the overall index values and produce a TB ranked map using a GIS overlay analysis and weighted linear combination. It is discovered that 71.43% of the Section is potential as TB high risk areas particularly at urban and densely populated settings. This predictive result is also reliable with the current real cases in 2015 by 76.00% accuracy. A GIS based MCDM method has demonstrated analytical capabilities in targeting high-risk spots and TB surveillance monitoring system of the country, but the result could be strengthened by applying other uncertainty assessment method.

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest.

Science.gov (United States)

Suh, Jangwon; Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

2017-11-27

In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further.

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

Science.gov (United States)

Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

2017-01-01

In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further. PMID:29186922

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

Directory of Open Access Journals (Sweden)

Jangwon Suh

2017-11-01

Full Text Available In this study, current geographic information system (GIS-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further.

Correction: Using participatory design to develop (public health decision support systems through GIS

Directory of Open Access Journals (Sweden)

Sawada Michael

2007-11-01

Full Text Available Abstract Background Organizations that collect substantial data for decision-making purposes are often characterized as being 'data rich' but 'information poor'. Maps and mapping tools can be very useful for research transfer in converting locally collected data into information. Challenges involved in incorporating GIS applications into the decision-making process within the non-profit (public health sector include a lack of financial resources for software acquisition and training for non-specialists to use such tools. This on-going project has two primary phases. This paper critically reflects on Phase 1: the participatory design (PD process of developing a collaborative web-based GIS tool. Methods A case study design is being used whereby the case is defined as the data analyst and manager dyad (a two person team in selected Ontario Early Year Centres (OEYCs. Multiple cases are used to support the reliability of findings. With nine producer/user pair participants, the goal in Phase 1 was to identify barriers to map production, and through the participatory design process, develop a web-based GIS tool suited for data analysts and their managers. This study has been guided by the Ottawa Model of Research Use (OMRU conceptual framework. Results Due to wide variations in OEYC structures, only some data analysts used mapping software and there was no consistency or standardization in the software being used. Consequently, very little sharing of maps and data occurred among data analysts. Using PD, this project developed a web-based mapping tool (EYEMAP that was easy to use, protected proprietary data, and permit limited and controlled sharing between participants. By providing data analysts with training on its use, the project also ensured that data analysts would not break cartographic conventions (e.g. using a chloropleth map for count data. Interoperability was built into the web-based solution; that is, EYEMAP can read many different

Small Core, Big Network: A Comprehensive Approach to GIS Teaching Practice Based on Digital Three-Dimensional Campus Reconstruction

Science.gov (United States)

Cheng, Liang; Zhang, Wen; Wang, Jiechen; Li, Manchun; Zhong, Lishan

2014-01-01

Geographic information science (GIS) features a wide range of disciplines and has broad applicability. Challenges associated with rapidly developing GIS technology and the currently limited teaching and practice materials hinder universities from cultivating highly skilled GIS graduates. Based on the idea of "small core, big network," a…

Development of SOVAT: a numerical-spatial decision support system for community health assessment research.

Science.gov (United States)

Scotch, Matthew; Parmanto, Bambang

2006-01-01

The development of numerical-spatial routines is frequently required to solve complex community health problems. Community health assessment (CHA) professionals who use information technology need a complete system that is capable of supporting the development of numerical-spatial routines. Currently, there is no decision support system (DSS) that is effectively able to accomplish this task as the majority of public health geospatial information systems (GIS) are based on traditional (relational) database architecture. On-Line Analytical Processing (OLAP) is a multidimensional data warehouse technique that is commonly used as a decision support system in standard industry. OLAP alone is not sufficient for solving numerical-spatial problems that frequently occur in CHA research. Coupling it with GIS technology offers the potential for a very powerful and useful system. A community health OLAP cube was created by integrating health and population data from various sources. OLAP and GIS technologies were then combined to develop the Spatial OLAP Visualization and Analysis Tool (SOVAT). The synergy of numerical and spatial environments within SOVAT is shown through an elaborate and easy-to-use drag and drop and direct manipulation graphical user interface (GUI). Community health problem-solving examples (routines) using SOVAT are shown through a series of screen shots. The impact of the difference between SOVAT and existing GIS public health applications can be seen by considering the numerical-spatial problem-solving examples. These examples are facilitated using OLAP-GIS functions. These functions can be mimicked in existing GIS public applications, but their performance and system response would be significantly worse since GIS is based on traditional (relational) backend. OLAP-GIS system offer great potential for powerful numerical-spatial decision support in community health analysis. The functionality of an OLAP-GIS system has been shown through a series of

WATERSHED BASED WEB GIS: CASE STUDY OF PALOPO WATERSHED AREA SOUTH SULAWESI, INDONESIA

Directory of Open Access Journals (Sweden)

Jalaluddin Rumi PRASAD

2017-09-01

Full Text Available Data and land resource information complete, accurate, and current is an input in management planning, evaluation, and monitoring Watershed. Implementation of this research is conducted with optimum utilization of secondary data that is supported by direct field measurement data, digitalizing the maps associated, Geographic Information Systems modeling, and model calibration. This research has resulted in a Geographic Information System Management of potential Watershed GIS Web-based or abbreviated WEB GIS MPPDAS using Palopo watershed area, South Sulawesi as a case study sites for the development of a prototype that consists of three applications the main website ie Web Portal, Web GIS, and Web Tutorial. The system is built to show online (and offline maps watershed in the administrative area of Palopo along with the location of its potential accumulated in the four (4 groups of layers, including groups of main layer (2 layer, a group of base layer (14 layers, groups of thematic layers (12 layers, a group of policy layer (8 layer. In addition to display a map, use the WEB application of GIS MPPDAS can also use tools or controls in the application to perform analyzes in its monitoring and evaluation, including: Geocoding, Add layer, Digitizing, Selection, Measurements, Graph, Filtering, Geolocation, Overlay cartographic, and etc.

GIS-Based Railway Route Selection for the Proposed Kenya-Sudan ...

African Journals Online (AJOL)

This paper describes a procedure developed for automated railway feasibility analysis based on GIS and Multi-Criteria analysis. Good engineering railway alignment requirements are assessed and suitable factors and constraints for feasibility analysis derived. Relevant digital map layers are then prepared and reclassified ...

Design and realization of tourism spatial decision support system based on GIS

Science.gov (United States)

Ma, Zhangbao; Qi, Qingwen; Xu, Li

2008-10-01

In this paper, the existing problems of current tourism management information system are analyzed. GIS, tourism as well as spatial decision support system are introduced, and the application of geographic information system technology and spatial decision support system to tourism management and the establishment of tourism spatial decision support system based on GIS are proposed. System total structure, system hardware and software environment, database design and structure module design of this system are introduced. Finally, realization methods of this systemic core functions are elaborated.

WATGIS: A GIS-Based Lumped Parameter Water Quality Model

Science.gov (United States)

Glenn P. Fernandez; George M. Chescheir; R. Wayne Skaggs; Devendra M. Amatya

2002-01-01

A Geographic Information System (GIS)­based, lumped parameter water quality model was developed to estimate the spatial and temporal nitrogen­loading patterns for lower coastal plain watersheds in eastern North Carolina. The model uses a spatially distributed delivery ratio (DR) parameter to account for nitrogen retention or loss along a drainage network. Delivery...

Geographic information systems (GIS): an emerging method to assess demand and provision for rehabilitation services.

Science.gov (United States)

Passalent, Laura; Borsy, Emily; Landry, Michel D; Cott, Cheryl

2013-09-01

To illustrate the application of geographic information systems (GIS) as a tool to assess rehabilitation service delivery by presenting results from research recently conducted to assess demand and provision for community rehabilitation service delivery in Ontario, Canada. Secondary analysis of data obtained from existing sources was used to establish demand and provision profiles for community rehabilitation services. These data were integrated using GIS software. A number of descriptive maps were produced that show the geographical distribution of service provision variables (location of individual rehabilitation health care providers and location of private and publicly funded community rehabilitation clinics) in relation to the distribution of demand variables (location of the general population; location of specific populations (i.e., residents age 65 and older) and distribution of household income). GIS provides a set of tools for describing and understanding the spatial organization of the health of populations and the distribution of health services that can aid the development of health policy and answer key research questions with respect to rehabilitation health services delivery. Implications for Rehabilitation It is important to seek out alternative and innovative methods to examine rehabilitation service delivery. GIS is a computer-based program that takes any data linked to a geographically referenced location and processes it through a software system that manages, analyses and displays the data in the form of a map, allowing for an alternative level of analysis. GIS provides a set of tools for describing and understanding the spatial organization of population health and health services that can aid the development of health policy and answer key research questions with respect to rehabilitation health services delivery.

Analysis Of Educational Services Distribution-Based Geographic Information System GIS

Directory of Open Access Journals (Sweden)

Waleed Lagrab

2015-03-01

Full Text Available Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facilities in Mukalla districts in YEMEN which contributed to building a geographic database for the study area. After that the Kindergarten spatial patterns are analyzed in terms of proximity to each other and used near some other land in the surrounding area such as streets highways factories etc. Also measures the concentration dispersion clustering and distribution direction for the kindergarten this study showed the effectiveness of the GIS for spatial data analysis. One of the most important finding that most of the Kindergarten was established in Mukalla city did not take into account the criteria that set by the authorities. Furthermore almost district suffers from a shortage in the number of kindergarten and pattern of distribution of those kindergartens dominated by spatial dispersed.

An uncertainty and sensitivity analysis approach for GIS-based multicriteria landslide susceptibility mapping

Science.gov (United States)

Feizizadeh, Bakhtiar; Blaschke, Thomas

2014-01-01

GIS-based multicriteria decision analysis (MCDA) methods are increasingly being used in landslide susceptibility mapping. However, the uncertainties that are associated with MCDA techniques may significantly impact the results. This may sometimes lead to inaccurate outcomes and undesirable consequences. This article introduces a new GIS-based MCDA approach. We illustrate the consequences of applying different MCDA methods within a decision-making process through uncertainty analysis. Three GIS-MCDA methods in conjunction with Monte Carlo simulation (MCS) and Dempster–Shafer theory are analyzed for landslide susceptibility mapping (LSM) in the Urmia lake basin in Iran, which is highly susceptible to landslide hazards. The methodology comprises three stages. First, the LSM criteria are ranked and a sensitivity analysis is implemented to simulate error propagation based on the MCS. The resulting weights are expressed through probability density functions. Accordingly, within the second stage, three MCDA methods, namely analytical hierarchy process (AHP), weighted linear combination (WLC) and ordered weighted average (OWA), are used to produce the landslide susceptibility maps. In the third stage, accuracy assessments are carried out and the uncertainties of the different results are measured. We compare the accuracies of the three MCDA methods based on (1) the Dempster–Shafer theory and (2) a validation of the results using an inventory of known landslides and their respective coverage based on object-based image analysis of IRS-ID satellite images. The results of this study reveal that through the integration of GIS and MCDA models, it is possible to identify strategies for choosing an appropriate method for LSM. Furthermore, our findings indicate that the integration of MCDA and MCS can significantly improve the accuracy of the results. In LSM, the AHP method performed best, while the OWA reveals better performance in the reliability assessment. The WLC

GIS based procedure of cumulative environmental impact assessment.

Science.gov (United States)

Balakrishna Reddy, M; Blah, Baiantimon

2009-07-01

Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

GIS and radiological crisis management; SIG et gestion de crise radiologique

Energy Technology Data Exchange (ETDEWEB)

Kacenelen, Y.

2009-07-01

The author reports a new operational exercise performed on September 17, 2009 on the CEA Saclay site. For this purpose, the CEA (the French Atomic Energy Commission) developed M2IRAGE, a tool based on ArcGIS 9.3 technologies. This tool allows an easier data collection and exploitation in order to quickly map the distribution of radioactive particles and thus help the management of the health response and emergency organization within two hours after the warning. This tool notably uses a geographic information system (GIS)

Application of GIS-based SCS-CN method in West Bank catchments, Palestine

Directory of Open Access Journals (Sweden)

Sameer Shadeed

2010-03-01

Full Text Available Among the most basic challenges of hydrology are the prediction and quantification of catchment surface runoff. The runoff curve number (CN is a key factor in determining runoff in the SCS (Soil Conservation Service based hydrologic modeling method. The traditional SCS-CN method for calculating the composite curve number is very tedious and consumes a major portion of the hydrologic modeling time. Therefore, geographic information systems (GIS are now being used in combination with the SCS-CN method. This paper assesses the modeling of flow in West Bank catchments using the GIS-based SCS-CN method. The West Bank, Palestine, is characterized as an arid to semi-arid region with annual rainfall depths ranging between 100 mm in the vicinity of the Jordan River to 700 mm in the mountains extending across the central parts of the region. The estimated composite curve number for the entire West Bank is about 50 assuming dry conditions. This paper clearly demonstrates that the integration of GIS with the SCS-CN method provides a powerful tool for estimating runoff volumes in West Bank catchments, representing arid to semi-arid catchments of Palestine.

A Framework for Sharing and Integrating Remote Sensing and GIS Models Based on Web Service

Science.gov (United States)

Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin

2014-01-01

Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a “black box” and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users. PMID:24901016

A framework for sharing and integrating remote sensing and GIS models based on Web service.

Science.gov (United States)

Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin

2014-01-01

Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a "black box" and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users.

Study of Noise Map and its Features in an Indoor Work Environment through GIS-Based Software

Directory of Open Access Journals (Sweden)

Faramarz Majidi

2016-06-01

Full Text Available Background: Noise mapping in industry can be useful to assess the risks of harmful noise, or to monitor noise in machine rooms. Using GIS -based software for plotting noise maps in an indoor noisy work environment can be helpful for occupational hygienists to monitor noise pollution. Methods: This study was carried out in a noisy packaging unit of a food industry in Ghazvin industrial zone, to evaluate noise levels by GIS technique. For this reason the floor of packaging unit was divided into squares of 2×2 meters and the center of each square was marked as a measurement station based on NIOSH method. The sound pressure level in each station was measured and then the measurement values were imported into Arc GIS software to plot noise map. Results: Unlike the current method, the noise maps generated by GIS technique are consistent with the nature of sound propagation. Conclusion: This study showed that for an indoor work environment, the application of GIS technology rendering the assessment of noise levels in the form of noise maps, is more realistic and more accurate than the routine method which is now being used by the occupational hygienists.

gis-based hydrological model based hydrological model upstream

African Journals Online (AJOL)

eobe

(GIS) environment to simulate various parame attributed to a ... water, sediment and agricultural chem large complex .... The 90m resolution topography data (see Figure 2) used for this .... results of the calibration and validation exercise are as.

MOBILE GIS: A TOOL FOR INFORMAL SETTLEMENT OCCUPANCY AUDIT TO IMPROVE INTEGRATED HUMAN SETTLEMENT IMPLEMENTATION IN EKURHULENI, SOUTH AFRICA

Directory of Open Access Journals (Sweden)

B. T. Mokoena

2016-06-01

Full Text Available Upgrading and relocating people in informal settlements requires consistent commitment, good strategies and systems so as to improve the lives of those who live in them. In South Africa, in order to allocate subsidised housing to beneficiaries of an informal settlement, beneficiary administration needs to be completed to determine the number of people who qualify for a subsidised house. Conventional methods of occupancy audits are often unreliable, cumbersome and non-spatial. Accordingly, this study proposes the use of mobile GIS to conduct these audits to provide up-to-date, accurate, comprehensive and real-time data so as to facilitate the development of integrated human settlements. An occupancy audit was subsequently completed for one of the communities in the Ekurhuleni municipality, Gauteng province, using web-based mobile GIS as a solution to providing smart information through evidence based decision making. Fieldworkers accessed the off-line capturing module on a mobile device recording GPS coordinates, socio-economic information and photographs. The results of this audit indicated that only 56.86% of the households residing within the community could potentially benefit from receiving a subsidised house. Integrated residential development, which includes fully and partially subsidised housing, serviced stands and some fully bonded housing opportunities, would then be key to adequately providing access to suitable housing options within a project in a post-colonial South Africa, creating new post-1994 neighbourhoods, in line with policy. The use of mobile GIS therefore needs to be extended to other informal settlement upgrading projects in South Africa.

GIS-based interactive tool to map the advent of world conquerors

Science.gov (United States)

Lakkaraju, Mahesh

The objective of this thesis is to show the scale and extent of some of the greatest empires the world has ever seen. This is a hybrid project between the GIS based interactive tool and the web-based JavaScript tool. This approach lets the students learn effectively about the emperors themselves while understanding how long and far their empires spread. In the GIS based tool, a map is displayed with various points on it, and when a user clicks on one point, the relevant information of what happened at that particular place is displayed. Apart from this information, users can also select the interactive animation button and can walk through a set of battles in chronological order. As mentioned, this uses Java as the main programming language, and MOJO (Map Objects Java Objects) provided by ESRI. MOJO is very effective as its GIS related features can be included in the application itself. This app. is a simple tool and has been developed for university or high school level students. D3.js is an interactive animation and visualization platform built on the Javascript framework. Though HTML5, CSS3, Javascript and SVG animations can be used to derive custom animations, this tool can help bring out results with less effort and more ease of use. Hence, it has become the most sought after visualization tool for multiple applications. D3.js has provided a map-based visualization feature so that we can easily display text-based data in a map-based interface. To draw the map and the points on it, D3.js uses data rendered in TOPO JSON format. The latitudes and longitudes can be provided, which are interpolated into the Map svg. One of the main advantages of doing it this way is that more information is retained when we use a visual medium.

A European perspective on GIS-based walkability and active modes of transport.

Science.gov (United States)

Grasser, Gerlinde; van Dyck, Delfien; Titze, Sylvia; Stronegger, Willibald J

2017-02-01

The association between GIS-based walkability and walking for transport is considered to be well established in USA and in Australia. Research on the association between walkability and cycling for transport in European cities is lacking. The aim of this study was to test the predictive validity of established walkability measures and to explore alternative walkability measures associated with walking and cycling for transport in a European context. Outcome data were derived from the representative cross-sectional survey ( n  = 843) ‘Radfreundliche Stadt’ of adults in the city of Graz (Austria). GIS-based walkability was measured using both established measures (e.g. gross population density, household unit density, entropy index, three-way intersection density, IPEN walkability index) and alternative measures (e.g. proportion of mixed land use, four-way intersection density, Graz walkability index). ANCOVAs were conducted to examine the adjusted association between walkability measures and outcomes. Household unit density, proportion of mixed land use, three-way intersection density and IPEN walkability index were positively associated with walking for transport, but the other measures were not. All walkability measures were positively associated with cycling for transport. The established walkability measures were applicable to a European city such as Graz. The alternative walkability measures performed well in a European context. Due to measurement issues the association between these walkability measures and walking for transport needs to be investigated further. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

GIS-based Integration of Interdisciplinary Ecological Data to Detect ...

African Journals Online (AJOL)

Key words: mangrove, satellite imagery, environment, aerial photography, GIS, Kenya Historic environmental, faunal, floral and socioeconomic data of Gazi Bay in coastal Kenya were collated and integrated into a GIS environment and data of impacts due to various factors were then related to remotely sensed data.

Archeology and GIS

Directory of Open Access Journals (Sweden)

Janez Dular

1992-12-01

Full Text Available Concepts of spatial and landscape archaeologu have been accepted within Stepene archaeology for a decade. These concepts are based on the assumption  that man, by his diverse activities, made a tremendous impact on the landscape as a whole. Therefore in the research of archaeological settlement patterns, the whole landscape should be observed and analgzed. Diverse techniques of archaeological survey for data collection were developed and theoretical concepts for interpretation of those data were adapted from geographg, but onlg by applying GIS technology were this concepts made accessible to ali archaeologists. Basic concepts for GIS applications were defined in the research project "The Genesis of the cultural landscape" at the Department of Archaeology of the University of Ljubljana. However, the Hvar Project, as the first archaeological čase study, played the crucial role in acceptance of GIS technology. The analyses were concentrated on the possibilities of GIS applications in archaeo logical analysis. The best results were achieved in definition of archaeological site territories, subsistence strategies, communications and trade analyses. Few regional čase studies were started this gear because it is to be expected that soon the majoritg of the GIS archaeological applications will be in protection and management of cultural heritage. Simultaneously the Institute for Archaeology at the Slovene Academy of Sciences and Art has started with the computerization of the site and monuments database which will be integrated into the state GIS.

Geomorphodiversity derived by a GIS-based geomorphological map: case study the Czech Republic

Czech Academy of Sciences Publication Activity Database

Demek, J.; Kirchner, Karel; Mackovčin, P.; Slavík, P.

2011-01-01

Roč. 55, č. 4 (2011), s. 415-436 ISSN 0372-8854 Institutional research plan: CEZ:AV0Z30860518 Keywords : geomorphodiversity * GIS geomorphological data base * GIS-geomorphological map * Czech Republic Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.642, year: 2011 http://www.ingentaconnect.com/content/schweiz/zfg/2011/00000055/00000004/art00001?token=004d10697e442f2067217d763b442c233e46533f34687627504541676249266d656cbe1a808f2

Using GIS to assess priorities of infrastructure and health needs of colonias along the United States-Mexico border

Science.gov (United States)

Parcher, J.W.; Humberson, D.G.

2009-01-01

Colonias, which are unincorporated border setdements in the United. States, have emerged in rural areas without the governance and services normally provided by local government. Colonia residents live in poverty and lack adequate health care, potable water, and sanitation systems. These conditions create substantial health risks for themselves and surrounding communities. By 2001, more than 1,400 colonias were identified in Texas. Cooperation with several Federal and Texas state agencies has allowed the U.S. Geological Survey (USGS) to improve colonia Geographic Information System (GIS) boundaries and develop the Colonia Health, Infrastructure, and Platting Status tool (CHIPS). Together, the GIS boundaries and CHIPS aid the Texas government in prioritizing the limited funds that are available for infrastructure improvement. CHIPS's report: generator can be tailored, to the needs of the user, providing either broad or specific output. CHIPS is publicly available on the U.S. Geological Survey Border Environmental Health Initiative website at http://borderhealth.cr. usgs.gov.

GIS WORK GROUP: AN OVERVIEW (INCLUDES GIS-QA AND AUDITING GIS DATABASE SYSTEMS)

Science.gov (United States)

In order to promote cooperation in the implementation of GIS in regional offices, a GIS Regional Workgroup was established by the ten Regions in 1989. Since that time the GIS Work Group evolved and now consists of members from each of the ten EPA Regional Offices, the Office of A...

Black Sea GIS developed in MHI

Science.gov (United States)

Zhuk, E.; Khaliulin, A.; Zodiatis, G.; Nikolaidis, A.; Isaeva, E.

2016-08-01

The work aims at creating the Black Sea geoinformation system (GIS) and complementing it with a model bank. The software for data access and visualization was developed using client server architecture. A map service based on MapServer and MySQL data management system were chosen for the Black Sea GIS. Php-modules and python-scripts are used to provide data access, processing, and exchange between the client application and the server. According to the basic data types, the module structure of GIS was developed. Each type of data is matched to a module which allows selection and visualization of the data. At present, a GIS complement with a model bank (the models build in to the GIS) and users' models (programs launched on users' PCs but receiving and displaying data via GIS) is developed.

Monitoring of dams according to German standard DIN 19 700 on the basis of a GIS based expert system; Stauanlagenueberwachung nach DIN 19 700 in Verbindung mit Expertensystemen auf GIS-Basis

Energy Technology Data Exchange (ETDEWEB)

Kast, Karl; Saucke, Ulrich; Elsaesser, Ralph [Dr.-Ing. Karl Kast + Partner (GbR) Ingenieurgemeinschaft fuer Umwelt- und Geotechnik, Ettlingen (Germany)

2010-07-01

The German standard DIN 19 700 stipulates regular safety reports assessing dams and their operation as part of the continuous dam monitoring scheme. Experience has shown that a GIS based dam monitoring system exhibits evident advantages regarding a continuous assessment. Besides and easy access to all relevant information grouped by themes, it offers a graphic analysis of measuring data and their display in the GIS system. In addition, concerning relevant failure mechanism, individual modules of a GIS based expert system are designed for the purpose of assessing the safety of the dam in the event of uncommon incidents. (orig.)

Hydropower systems planning in distribution networks based on GIS

Energy Technology Data Exchange (ETDEWEB)

Ramirez-Rosado, I.J.; Zorzano-Santamaria, P.; Fernandez-Jiminez, L.A.; Garcia-Garrido, E.; Zorzano-Alba, E.; Lara-Santillan, P.M.; Mendoza-Villena, M. [La Rioja Univ., La Rioja (Spain). Dept. of Electrical Engineering

2005-07-01

Planning models for hydraulic energy systems developed with a new computational geographic information system (GIS) tool were presented. The GIS tool was used to identify sections of rivers that are suitable for small-scale run-of-river hydropower generation in the La Rioja region of Spain. The tool was also used to evaluate economic data related to financing grants, technological costs, installation costs, and forecast demands for various consumption scenarios. Case studies of 2 hydropower systems were used to test the tool. The planning models were based on levelized electric costs (LEC) of run-of-river hydropower systems, and enabled the systems to be analyzed in isolation as well as when connected to an existing electricity network. Results of the modelling studies showed that the tool is capable of analyzing the LEC of potential hydropower systems in a range of different scenarios while maintaining the geographic characteristics and requirements of individual regions. 7 refs., 4 figs.

DEVELOPING GIS-BASED DEMAND-RESPONSIVE TRANSIT SYSTEM IN TEHRAN CITY

Directory of Open Access Journals (Sweden)

H. Faroqi

2015-12-01

Full Text Available Create, maintain and development of public transport network in metropolitan are important problems in the field of urban transport management. In public transport, maximize the efficient use of public fleet capacity has been considered. Concepts and technologies of GIS have provided suitable way for management and optimization of the public transports systems. In demand-responsive public transportation system, firstly fellow traveller groups have been established for applicants based on spatial concepts and tools of GIS, second for each group according to its’ members and their paths, a public vehicle has been allocated to them then based on dynamic routing, the fellow passenger group has been gathered from their origins and has been moved to their destinations through optimal route. The suggested system has been implemented based on network data and commuting trips statistics of 1 to 6 districts in Tehran city. Evaluation performed on the results show the 34% increase using of Taxi capacity, 13% increase using of Van capacity and 10% increase using of Bus capacity in comparison between current public transport system and suggested public transportation system has been improved.

Estimating Hantavirus Risk in Southern Argentina: A GIS-Based Approach Combining Human Cases and Host Distribution

Directory of Open Access Journals (Sweden)

Veronica Andreo

2014-01-01

Full Text Available We use a Species Distribution Modeling (SDM approach along with Geographic Information Systems (GIS techniques to examine the potential distribution of hantavirus pulmonary syndrome (HPS caused by Andes virus (ANDV in southern Argentina and, more precisely, define and estimate the area with the highest infection probability for humans, through the combination with the distribution map for the competent rodent host (Oligoryzomys longicaudatus. Sites with confirmed cases of HPS in the period 1995–2009 were mostly concentrated in a narrow strip (~90 km × 900 km along the Andes range from northern Neuquén to central Chubut province. This area is characterized by high mean annual precipitation (~1,000 mm on average, but dry summers (less than 100 mm, very low percentages of bare soil (~10% on average and low temperatures in the coldest month (minimum average temperature −1.5 °C, as compared to the HPS-free areas, features that coincide with sub-Antarctic forests and shrublands (especially those dominated by the invasive plant Rosa rubiginosa, where rodent host abundances and ANDV prevalences are known to be the highest. Through the combination of predictive distribution maps of the reservoir host and disease cases, we found that the area with the highest probability for HPS to occur overlaps only 28% with the most suitable habitat for O. longicaudatus. With this approach, we made a step forward in the understanding of the risk factors that need to be considered in the forecasting and mapping of risk at the regional/national scale. We propose the implementation and use of thematic maps, such as the one built here, as a basic tool allowing public health authorities to focus surveillance efforts and normally scarce resources for prevention and control actions in vast areas like southern Argentina.

Estimating Hantavirus Risk in Southern Argentina: A GIS-Based Approach Combining Human Cases and Host Distribution

Science.gov (United States)

Andreo, Veronica; Neteler, Markus; Rocchini, Duccio; Provensal, Cecilia; Levis, Silvana; Porcasi, Ximena; Rizzoli, Annapaola; Lanfri, Mario; Scavuzzo, Marcelo; Pini, Noemi; Enria, Delia; Polop, Jaime

2014-01-01

We use a Species Distribution Modeling (SDM) approach along with Geographic Information Systems (GIS) techniques to examine the potential distribution of hantavirus pulmonary syndrome (HPS) caused by Andes virus (ANDV) in southern Argentina and, more precisely, define and estimate the area with the highest infection probability for humans, through the combination with the distribution map for the competent rodent host (Oligoryzomys longicaudatus). Sites with confirmed cases of HPS in the period 1995–2009 were mostly concentrated in a narrow strip (~90 km × 900 km) along the Andes range from northern Neuquén to central Chubut province. This area is characterized by high mean annual precipitation (~1,000 mm on average), but dry summers (less than 100 mm), very low percentages of bare soil (~10% on average) and low temperatures in the coldest month (minimum average temperature −1.5 °C), as compared to the HPS-free areas, features that coincide with sub-Antarctic forests and shrublands (especially those dominated by the invasive plant Rosa rubiginosa), where rodent host abundances and ANDV prevalences are known to be the highest. Through the combination of predictive distribution maps of the reservoir host and disease cases, we found that the area with the highest probability for HPS to occur overlaps only 28% with the most suitable habitat for O. longicaudatus. With this approach, we made a step forward in the understanding of the risk factors that need to be considered in the forecasting and mapping of risk at the regional/national scale. We propose the implementation and use of thematic maps, such as the one built here, as a basic tool allowing public health authorities to focus surveillance efforts and normally scarce resources for prevention and control actions in vast areas like southern Argentina. PMID:24424500

Development and implementation of a GIS-based tool for spatial modeling of seismic vulnerability of Tehran

Directory of Open Access Journals (Sweden)

M. Hashemi

2012-12-01

Full Text Available Achieving sustainable development in countries prone to earthquakes is possible with taking effective measures to reduce vulnerability to earthquakes. In this context, damage assessment of hypothetical earthquakes and planning for disaster management are important issues. Having a computer tool capable of estimating structural and human losses from earthquakes in a specific region may facilitate the decision-making process before and during disasters. Interoperability of this tool with wide-spread spatial analysis frameworks will expedite the data transferring process. In this study, the earthquake damage assessment (EDA software tool is developed as an embedded extension within a GIS (geographic information system environment for the city of Tehran, Iran. This GIS-based extension provides users with a familiar environment to estimate and observe the probable damages and fatalities of a deterministic earthquake scenario. The productivity of this tool is later demonstrated for southern Karoon parish, Region 10, Tehran. Three case studies for three active faults in the area and a comparison of the results with other research substantiated the reliability of this tool for additional earthquake scenarios.

Depth data research of GIS based on clustering analysis algorithm

Science.gov (United States)

Xiong, Yan; Xu, Wenli

2018-03-01

The data of GIS have spatial distribution. Geographic data has both spatial characteristics and attribute characteristics, and also changes with time. Therefore, the amount of data is very large. Nowadays, many industries and departments in the society are using GIS. However, without proper data analysis and mining scheme, GIS will not exert its maximum effectiveness and will waste a lot of data. In this paper, we use the geographic information demand of a national security department as the experimental object, combining the characteristics of GIS data, taking into account the characteristics of time, space, attributes and so on, and using cluster analysis algorithm. We further study the mining scheme for depth data, and get the algorithm model. This algorithm can automatically classify sample data, and then carry out exploratory analysis. The research shows that the algorithm model and the information mining scheme can quickly find hidden depth information from the surface data of GIS, thus improving the efficiency of the security department. This algorithm can also be extended to other fields.

Web-based public health geographic information systems for resources-constrained environment using scalable vector graphics technology: a proof of concept applied to the expanded program on immunization data

Directory of Open Access Journals (Sweden)

Kamadjeu Raoul

2006-06-01

Full Text Available Abstract Background Geographic Information Systems (GIS are powerful communication tools for public health. However, using GIS requires considerable skill and, for this reason, is sometimes limited to experts. Web-based GIS has emerged as a solution to allow a wider audience to have access to geospatial information. Unfortunately the cost of implementing proprietary solutions may be a limiting factor in the adoption of a public health GIS in a resource-constrained environment. Scalable Vector Graphics (SVG is used to define vector-based graphics for the internet using XML (eXtensible Markup Language; it is an open, platform-independent standard maintained by the World Wide Web Consortium (W3C since 2003. In this paper, we summarize our methodology and demonstrate the potential of this free and open standard to contribute to the dissemination of Expanded Program on Immunization (EPI information by providing interactive maps to a wider audience through the Internet. Results We used SVG to develop a database driven web-based GIS applied to EPI data from three countries of WHO AFRO (World Health Organization – African Region. The system generates interactive district-level country immunization coverage maps and graphs. The approach we describe can be expanded to cover other public health GIS demanding activities, including the design of disease atlases in a resources-constrained environment. Conclusion Our system contributes to accumulating evidence demonstrating the potential of SVG technology to develop web-based public health GIS in resources-constrained settings.

Web-based public health geographic information systems for resources-constrained environment using scalable vector graphics technology: a proof of concept applied to the expanded program on immunization data.

Science.gov (United States)

Kamadjeu, Raoul; Tolentino, Herman

2006-06-03

Geographic Information Systems (GIS) are powerful communication tools for public health. However, using GIS requires considerable skill and, for this reason, is sometimes limited to experts. Web-based GIS has emerged as a solution to allow a wider audience to have access to geospatial information. Unfortunately the cost of implementing proprietary solutions may be a limiting factor in the adoption of a public health GIS in a resource-constrained environment. Scalable Vector Graphics (SVG) is used to define vector-based graphics for the internet using XML (eXtensible Markup Language); it is an open, platform-independent standard maintained by the World Wide Web Consortium (W3C) since 2003. In this paper, we summarize our methodology and demonstrate the potential of this free and open standard to contribute to the dissemination of Expanded Program on Immunization (EPI) information by providing interactive maps to a wider audience through the Internet. We used SVG to develop a database driven web-based GIS applied to EPI data from three countries of WHO AFRO (World Health Organization - African Region). The system generates interactive district-level country immunization coverage maps and graphs. The approach we describe can be expanded to cover other public health GIS demanding activities, including the design of disease atlases in a resources-constrained environment. Our system contributes to accumulating evidence demonstrating the potential of SVG technology to develop web-based public health GIS in resources-constrained settings.

ArcNLET: A GIS-based software to simulate groundwater nitrate load from septic systems to surface water bodies

Science.gov (United States)

Rios, J. Fernando; Ye, Ming; Wang, Liying; Lee, Paul Z.; Davis, Hal; Hicks, Rick

2013-03-01

Onsite wastewater treatment systems (OWTS), or septic systems, can be a significant source of nitrates in groundwater and surface water. The adverse effects that nitrates have on human and environmental health have given rise to the need to estimate the actual or potential level of nitrate contamination. With the goal of reducing data collection and preparation costs, and decreasing the time required to produce an estimate compared to complex nitrate modeling tools, we developed the ArcGIS-based Nitrate Load Estimation Toolkit (ArcNLET) software. Leveraging the power of geographic information systems (GIS), ArcNLET is an easy-to-use software capable of simulating nitrate transport in groundwater and estimating long-term nitrate loads from groundwater to surface water bodies. Data requirements are reduced by using simplified models of groundwater flow and nitrate transport which consider nitrate attenuation mechanisms (subsurface dispersion and denitrification) as well as spatial variability in the hydraulic parameters and septic tank distribution. ArcNLET provides a spatial distribution of nitrate plumes from multiple septic systems and a load estimate to water bodies. ArcNLET's conceptual model is divided into three sub-models: a groundwater flow model, a nitrate transport and fate model, and a load estimation model which are implemented as an extension to ArcGIS. The groundwater flow model uses a map of topography in order to generate a steady-state approximation of the water table. In a validation study, this approximation was found to correlate well with a water table produced by a calibrated numerical model although it was found that the degree to which the water table resembles the topography can vary greatly across the modeling domain. The transport model uses a semi-analytical solution to estimate the distribution of nitrate within groundwater, which is then used to estimate a nitrate load using a mass balance argument. The estimates given by ArcNLET are

Study on Global GIS architecture and its key technologies

Science.gov (United States)

Cheng, Chengqi; Guan, Li; Lv, Xuefeng

2010-11-01

Global GIS (G2IS) is a system, which supports the huge data process and the global direct manipulation on global grid based on spheroid or ellipsoid surface. Based on global subdivision grid (GSG), Global GIS architecture is presented in this paper, taking advantage of computer cluster theory, the space-time integration technology and the virtual reality technology. Global GIS system architecture is composed of five layers, including data storage layer, data representation layer, network and cluster layer, data management layer and data application layer. Thereinto, it is designed that functions of four-level protocol framework and three-layer data management pattern of Global GIS based on organization, management and publication of spatial information in this architecture. Three kinds of core supportive technologies, which are computer cluster theory, the space-time integration technology and the virtual reality technology, and its application pattern in the Global GIS are introduced in detail. The primary ideas of Global GIS in this paper will be an important development tendency of GIS.

Analyzing the Correlation between Deer Habitat and the Component of the Risk for Lyme Disease in Eastern Ontario, Canada: A GIS-Based Approach

Directory of Open Access Journals (Sweden)

Dongmei Chen

2015-01-01

Full Text Available Lyme borreliosis, caused by the bacterium, Borrelia burgdorferi, is an emerging vector-borne infectious disease in Canada. According to the Public Health Agency of Canada (PHAC, by the year 2020, 80% of Canadians will live in Lyme endemic areas. An understanding of the association of Ixodes scapularis, the main vector of Lyme disease, with it hosts is a fundamental component in assessing changes in the spatial distribution of human risk for Lyme disease. Through the application of Geographic Information System (GIS mapping methods and spatial analysis techniques, this study examines the population dynamics of the black-legged Lyme tick and its primary host, the white-tailed deer, in eastern Ontario, Canada. By developing a habitat suitability model through a GIS-based multi-criteria decision making (MCDM analysis, the relationship of the deer habitat suitability map was generated and the results were compared with deer harvest data. Tick submission data collected from two public health units between 2006 and 2012 were used to explore the relationship between endemic ticks and deer habitat suitability in eastern Ontario. The positive correlation demonstrated between the deer habitat suitability model and deer harvest data allows us to further analyze the association between deer habitat and black-legged ticks in our study area. Our results revealed that the high tick submission number corresponds with the high suitability. These results are useful for developing management strategies that aim to prevent Lyme from becoming a threat to public health in Canada. Further studies are required to investigate how tick survival, behaviour and seasonal activity may change with projected climate change.

Real-time Geographic Information System (GIS) for Monitoring the Area of Potential Water Level Using Rule Based System

Science.gov (United States)

Anugrah, Wirdah; Suryono; Suseno, Jatmiko Endro

2018-02-01

Management of water resources based on Geographic Information System can provide substantial benefits to water availability settings. Monitoring the potential water level is needed in the development sector, agriculture, energy and others. In this research is developed water resource information system using real-time Geographic Information System concept for monitoring the potential water level of web based area by applying rule based system method. GIS consists of hardware, software, and database. Based on the web-based GIS architecture, this study uses a set of computer that are connected to the network, run on the Apache web server and PHP programming language using MySQL database. The Ultrasound Wireless Sensor System is used as a water level data input. It also includes time and geographic location information. This GIS maps the five sensor locations. GIS is processed through a rule based system to determine the level of potential water level of the area. Water level monitoring information result can be displayed on thematic maps by overlaying more than one layer, and also generating information in the form of tables from the database, as well as graphs are based on the timing of events and the water level values.

GIS-based rare events logistic regression for mineral prospectivity mapping

Science.gov (United States)

Xiong, Yihui; Zuo, Renguang

2018-02-01

Mineralization is a special type of singularity event, and can be considered as a rare event, because within a specific study area the number of prospective locations (1s) are considerably fewer than the number of non-prospective locations (0s). In this study, GIS-based rare events logistic regression (RELR) was used to map the mineral prospectivity in the southwestern Fujian Province, China. An odds ratio was used to measure the relative importance of the evidence variables with respect to mineralization. The results suggest that formations, granites, and skarn alterations, followed by faults and aeromagnetic anomaly are the most important indicators for the formation of Fe-related mineralization in the study area. The prediction rate and the area under the curve (AUC) values show that areas with higher probability have a strong spatial relationship with the known mineral deposits. Comparing the results with original logistic regression (OLR) demonstrates that the GIS-based RELR performs better than OLR. The prospectivity map obtained in this study benefits the search for skarn Fe-related mineralization in the study area.

GIS malaria risk assessment of Akure North and South Local ...

African Journals Online (AJOL)

Health-based survey, larval survey, socio-economic survey, and Geographic Information System (GIS) were used in achieving the objectives of the study. Larvae of mosquitoes were collected from breeding sites across the study areas; information on reported malaria cases from year 2010 to 2013 were retrieved from ...

The architecture of a virtual grid GIS server

Science.gov (United States)

Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

2008-10-01

The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

A DISTRIBUTED HYPERMAP MODEL FOR INTERNET GIS

Institute of Scientific and Technical Information of China (English)

无

2000-01-01

The rapid development of Internet technology makes it possible to integrate GIS with the Internet,forming Internet GIS.Internet GIS is based on a distributed client/server architecture and TCP/IP & IIOP.When constructing and designing Internet GIS,we face the problem of how to express information units of Internet GIS.In order to solve this problem,this paper presents a distributed hypermap model for Internet GIS.This model provides a solution to organize and manage Internet GIS information units.It also illustrates relations between two information units and in an internal information unit both on clients and servers.On the basis of this model,the paper contributes to the expressions of hypermap relations and hypermap operations.The usage of this model is shown in the implementation of a prototype system.

Wind Energy Based Electric Vehicle Charging Stations Sitting. A GIS/Wind Resource Assessment Approach

Directory of Open Access Journals (Sweden)

George Xydis

2015-11-01

Full Text Available The transportation sector is severely correlated with major problems in environment, citizens’ health, climate and economy. Issues such as traffic, fuel cost and parking space have make life more difficult, especially in the dense urban environment. Thus, there is a great need for the development of the electric vehicle (EV sector. The number of cars in cities has increased so much that the current transportation system (roads, parking places, traffic lights, etc. cannot accommodate them properly. The increasing number of vehicles does not affect only humans but also the environment, through air and noise pollution. According to EPA, the 39.2% of total gas emissions in 2007 was caused by transportation activities. Studies have shown that the pollutants are not only gathered in the major roads and/or highways but can travel depending on the meteorological conditions leading to generic pollution. The promotion of EVs and the charging stations are both equally required to be further developed in order EVs to move out of the cities and finally confront the range problem. In this work, a wind resource and a GIS analysis optimizes in a wider area the sitting of wind based charging stations and proposes an optimizing methodology.

Some Biomaterials based on Collagen in Human Health care

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Some Biomaterials based on Collagen in Human Health care. Ophthalmology. Wound healing. Burn Dressing. Tumor Treatment. Tissue Engineered devices. for cardio-vascular functions; For managing chronic illnesses including diabetic ulcers and foot. Smart shoe.

Gis-Based Smart Cartography Using 3d Modeling

Science.gov (United States)

Malinverni, E. S.; Tassetti, A. N.

2013-08-01

3D City Models have evolved to be important tools for urban decision processes and information systems, especially in planning, simulation, analysis, documentation and heritage management. On the other hand existing and in use numerical cartography is often not suitable to be used in GIS because not geometrically and topologically correctly structured. The research aim is to 3D structure and organize a numeric cartography for GIS and turn it into CityGML standardized features. The work is framed around a first phase of methodological analysis aimed to underline which existing standard (like ISO and OGC rules) can be used to improve the quality requirement of a cartographic structure. Subsequently, from this technical specifics, it has been investigated the translation in formal contents, using an owner interchange software (SketchUp), to support some guide lines implementations to generate a GIS3D structured in GML3. It has been therefore predisposed a test three-dimensional numerical cartography (scale 1:500, generated from range data captured by 3D laser scanner), tested on its quality according to the previous standard and edited when and where necessary. Cad files and shapefiles are converted into a final 3D model (Google SketchUp model) and then exported into a 3D city model (CityGML LoD1/LoD2). The GIS3D structure has been managed in a GIS environment to run further spatial analysis and energy performance estimate, not achievable in a 2D environment. In particular geometrical building parameters (footprint, volume etc.) are computed and building envelop thermal characteristics are derived from. Lastly, a simulation is carried out to deal with asbestos and home renovating charges and show how the built 3D city model can support municipal managers with risk diagnosis of the present situation and development of strategies for a sustainable redevelop.

Integrating Online GIS into the K-12 Curricula: Lessons from the Development of a Collaborative GIS in Michigan

Science.gov (United States)

Henry, Paul; Semple, Hugh

2012-01-01

GIS has shown promise in Project Based Learning (PBL) environments, but many obstacles exist in its integration into school curriculums. This article discusses the development and utilization of an online GIS tool that was created to illustrate that the perceptual gap between relevance and ease of use of GIS software can be bridged at the K-12…

A WebGIS-based system for analyzing and visualizing air quality data for Shanghai Municipality

Science.gov (United States)

Wang, Manyi; Liu, Chaoshun; Gao, Wei

2014-10-01

An online visual analytical system based on Java Web and WebGIS for air quality data for Shanghai Municipality was designed and implemented to quantitatively analyze and qualitatively visualize air quality data. By analyzing the architecture of WebGIS and Java Web, we firstly designed the overall scheme for system architecture, then put forward the software and hardware environment and also determined the main function modules for the system. The visual system was ultimately established with the DIV + CSS layout method combined with JSP, JavaScript, and some other computer programming languages based on the Java programming environment. Moreover, Struts, Spring, and Hibernate frameworks (SSH) were integrated in the system for the purpose of easy maintenance and expansion. To provide mapping service and spatial analysis functions, we selected ArcGIS for Server as the GIS server. We also used Oracle database and ESRI file geodatabase to store spatial data and non-spatial data in order to ensure the data security. In addition, the response data from the Web server are resampled to implement rapid visualization through the browser. The experimental successes indicate that this system can quickly respond to user's requests, and efficiently return the accurate processing results.

Sensuous and Reflexive GIS: exploring visualisation and VRML

Directory of Open Access Journals (Sweden)

Mark Gillings

1996-09-01

Full Text Available Over the last five years, landscape-based archaeological research has been transformed as the widespread introduction of Geographical Information Systems (GIS has begun to revolutionise the way we, as archaeologists, manage and manipulate spatial information. As GIS-based applications begin to reach maturity and the role of GIS as a flexible mechanism for the articulation, exploration and analysis of landscape data becomes more fully realised, GIS is increasingly being seen as much as a place to think as a simple data management and mapping tool.

GIS-based Watershed Management Modeling for Surface Runoff Calculation in Tatara River Basin, Japan

OpenAIRE

Ix, Hour; Mori, Makito; Hiramatsu, Kazuaki; Harada, Masayoshi

2007-01-01

In the past few decades when Geographical Information System (GIS) technology was not fully developed in practical use, watershed delineation work used to be conducted manually by hydrologists based on topographic maps. The work was a tedious operation, since it had to be done repeatedly in similar manner for each basin or sub-basin of interest, and its process always left some unpredicted errors. Nowadays, GIS software is being upgraded regularly with powerful tools responding to the needs o...

A multifaceted comparison of ArcGIS and MapMarker for automated geocoding

Directory of Open Access Journals (Sweden)

Sanjaya Kumar

2012-11-01

Full Text Available Geocoding is increasingly being used for public health surveillance and spatial epidemiology studies. Public health departments in the United States of America (USA often use this approach to investigate disease outbreaks and clusters or assign health records to appropriate geographic units. We evaluated two commonly used geocoding software packages, ArcGIS and MapMarker, for automated geocoding of a large number of residential addresses from health administrative data in New York State, USA to better understand their features, performance and limitations. The comparison was based on three metrics of evaluation: completeness (or match rate, geocode similarity and positional accuracy. Of the 551,798 input addresses, 318,302 (57.7% were geocoded by MapMarker and 420,813 (76.3% by the ArcGIS composite address locator. High similarity between the geocodes assigned by the two methods was found, especially in suburban and urban areas. Among addresses with a distance of greater than 100 m between the geocodes assigned by the two packages, the point assigned by ArcGIS was closer to the associated parcel centroid (“true” location compared with that assigned by MapMarker. In addition, the composite address locator in ArcGIS allows users to fully utilise available reference data, which consequently results in better geocoding results. However, the positional differences found were minimal, and a large majority of addresses were placed on the same locations by both geocoding packages. Using both methods and combining the results can maximise match rates and save the time needed for manual geocoding.

A multifaceted comparison of ArcGIS and MapMarker for automated geocoding.

Science.gov (United States)

Kumar, Sanjaya; Liu, Ming; Hwang, Syni-An

2012-11-01

Geocoding is increasingly being used for public health surveillance and spatial epidemiology studies. Public health departments in the United States of America (USA) often use this approach to investigate disease outbreaks and clusters or assign health records to appropriate geographic units. We evaluated two commonly used geocoding software packages, ArcGIS and MapMarker, for automated geocoding of a large number of residential addresses from health administrative data in New York State, USA to better understand their features, performance and limitations. The comparison was based on three metrics of evaluation: completeness (or match rate), geocode similarity and positional accuracy. Of the 551,798 input addresses, 318,302 (57.7%) were geocoded by MapMarker and 420,813 (76.3%) by the ArcGIS composite address locator. High similarity between the geocodes assigned by the two methods was found, especially in suburban and urban areas. Among addresses with a distance of greater than 100 m between the geocodes assigned by the two packages, the point assigned by ArcGIS was closer to the associated parcel centroid ("true" location) compared with that assigned by MapMarker. In addition, the composite address locator in ArcGIS allows users to fully utilise available reference data, which consequently results in better geocoding results. However, the positional differences found were minimal, and a large majority of addresses were placed on the same locations by both geocoding packages. Using both methods and combining the results can maximise match rates and save the time needed for manual geocoding.

Three-dimensional GIS approach for management of assets

Science.gov (United States)

Lee, S. Y.; Yee, S. X.; Majid, Z.; Setan, H.

2014-02-01

Assets play an important role in human life, especially to an organization. Organizations strive and put more effort to improve its operation and assets management. The development of GIS technology has become a powerful tool in management as it is able to provide a complete inventory for managing assets with location-based information. Spatial information is one of the requirements in decision making in various areas, including asset management in the buildings. This paper describes a 3D GIS approach for management of assets. An asset management system was developed by integrating GIS concept and 3D model assets. The purposes of 3D visualization to manage assets are to facilitate the analysis and understanding in the complex environment. Behind the 3D model of assets is a database to store the asset information. A user-friendly interface was also designed for more easier to operate the application. In the application developed, location of each individual asset can be easily tracked according to the referring spatial information and 3D viewing. The 3D GIS approach described in this paper is certainly would be useful in asset management. Systematic management of assets can be carried out and this will lead to less-time consuming and cost-effective. The results in this paper will show a new approach to improve asset management.

Three-dimensional GIS approach for management of assets

International Nuclear Information System (INIS)

Lee, S Y; Yee, S X; Majid, Z; Setan, H

2014-01-01

Assets play an important role in human life, especially to an organization. Organizations strive and put more effort to improve its operation and assets management. The development of GIS technology has become a powerful tool in management as it is able to provide a complete inventory for managing assets with location-based information. Spatial information is one of the requirements in decision making in various areas, including asset management in the buildings. This paper describes a 3D GIS approach for management of assets. An asset management system was developed by integrating GIS concept and 3D model assets. The purposes of 3D visualization to manage assets are to facilitate the analysis and understanding in the complex environment. Behind the 3D model of assets is a database to store the asset information. A user-friendly interface was also designed for more easier to operate the application. In the application developed, location of each individual asset can be easily tracked according to the referring spatial information and 3D viewing. The 3D GIS approach described in this paper is certainly would be useful in asset management. Systematic management of assets can be carried out and this will lead to less-time consuming and cost-effective. The results in this paper will show a new approach to improve asset management

Evaluation of heavy metals level (arsenic, nickel, mercury and lead effecting on health in drinking water resource of Kohgiluyeh county using geographic information system (GIS

Directory of Open Access Journals (Sweden)

Abdolazim Alinejad

2016-08-01

Full Text Available This study was conducted to determine the amount of heavy metals (Arsenic, Nickel, Mercury, and Lead in drinking water resource of Kohgiluyeh County using Geographic Information System (GIS. This cross-sectional study was conducted on drinking water resource of Kohgiluyeh County (33 water supplies and 4 heavy metals in 2013. 264 samples were analyzed in this study. The experiments were performed at the laboratory of Water and Wastewater Company based on Standard Method. The Atomic Adsorption was used to evaluate the amount of heavy metals. The results were mapping by Geographic Information System software (GIS 9.3 after processing of parameters. Finally, the data were analyzed by SPSS 16 and Excel 2007. The maximum amount of each heavy metal and its resource were shown as follow: Nickel or Ni (Source of w12, 124ppb, Arsenic or As (w33, 42 ppb, Mercury or Hg (w22 and w30, 96ppb, Lead or Pb (w21, 1553ppb. Also, the GIS maps showed that Lead in the central region was very high, Mercury and Arsenic in the northern region were high and Nickel in the eastern and western regions was high. The Kriging method and Gauss model were introduced as best method for interpolation of these metals. Since the concentration of these heavy metals was higher than standard levels in most drinking water supplies in Kohgiluyeh County and these high levels of heavy metals can cause the adverse effects on human health; therefore, the environmental and geological studies are necessary to identify the pollution resource and elimination and removal of heavy metals

A GIS-based decision support system for regional eco-security assessment and its application on the Tibetan Plateau.

Science.gov (United States)

Xiaodan, Wang; Xianghao, Zhong; Pan, Gao

2010-10-01

Regional eco-security assessment is an intricate, challenging task. In previous studies, the integration of eco-environmental models and geographical information systems (GIS) usually takes two approaches: loose coupling and tight coupling. However, the present study used a full coupling approach to develop a GIS-based regional eco-security assessment decision support system (ESDSS). This was achieved by merging the pressure-state-response (PSR) model and the analytic hierarchy process (AHP) into ArcGIS 9 as a dynamic link library (DLL) using ArcObjects in ArcGIS and Visual Basic for Applications. Such an approach makes it easy to capitalize on the GIS visualization and spatial analysis functions, thereby significantly supporting the dynamic estimation of regional eco-security. A case study is presented for the Tibetan Plateau, known as the world's "third pole" after the Arctic and Antarctic. Results verified the usefulness and feasibility of the developed method. As a useful tool, the ESDSS can also help local managers to make scientifically-based and effective decisions about Tibetan eco-environmental protection and land use. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

A GIS-based Quantitative Approach for the Search of Clandestine Graves, Italy.

Science.gov (United States)

Somma, Roberta; Cascio, Maria; Silvestro, Massimiliano; Torre, Eliana

2018-05-01

Previous research on the RAG color-coded prioritization systems for the discovery of clandestine graves has not considered all the factors influencing the burial site choice within a GIS project. The goal of this technical note was to discuss a GIS-based quantitative approach for the search of clandestine graves. The method is based on cross-referenced RAG maps with cumulative suitability factors to host a burial, leading to the editing of different search scenarios for ground searches showing high-(Red), medium-(Amber), and low-(Green) priority areas. The application of this procedure allowed several outcomes to be determined: If the concealment occurs at night, then the "search scenario without the visibility" will be the most effective one; if the concealment occurs in daylight, then the "search scenario with the DSM-based visibility" will be most appropriate; the different search scenarios may be cross-referenced with offender's confessions and eyewitnesses' testimonies to verify the veracity of their statements. © 2017 American Academy of Forensic Sciences.

A Web GIS Framework for Participatory Sensing Service: An Open Source-Based Implementation

Directory of Open Access Journals (Sweden)

Yu Nakayama

2017-04-01

Full Text Available Participatory sensing is the process in which individuals or communities collect and analyze systematic data using mobile phones and cloud services. To efficiently develop participatory sensing services, some server-side technologies have been proposed. Although they provide a good platform for participatory sensing, they are not optimized for spatial data management and processing. For the purpose of spatial data collection and management, many web GIS approaches have been studied. However, they still have not focused on the optimal framework for participatory sensing services. This paper presents a web GIS framework for participatory sensing service (FPSS. The proposed FPSS enables an integrated deployment of spatial data capture, storage, and data management functions. In various types of participatory sensing experiments, users can collect and manage spatial data in a unified manner. This feature is realized by the optimized system architecture and use case based on the general requirements for participatory sensing. We developed an open source GIS-based implementation of the proposed framework, which can overcome financial difficulties that are one of the major problems of deploying sensing experiments. We confirmed with the prototype that participatory sensing experiments can be performed efficiently with the proposed FPSS.

Study Of Safety Management By Using Gis In Coimbatore

Directory of Open Access Journals (Sweden)

S. Kanchana

2015-08-01

Full Text Available The safety management is very important in the process of construction .The traditional methods of construction safety control cannot meet the construction of big project. To ensure the safety of construction and reduce accidents in the process of construction the current situation and problems we face in construction safety management should be studied first. And then the project risk warning mechanism based on the GIS is constructed according to the problems we faced to achieve visual monitoring and warning of construction safety risk management and to provide decision support for construction. This project aims to develop a web-based spatial decision support system model for proactive health and safety management in linear construction projects. 5 Currently health and safety management is usually performed reactively instead of proactive management since hazard identification and risk assessment is mostly performed on paper based documents that are not effectively used at site. An information system relates to a chain of operations lead to planning the observation and collection of data to storage and analysis of data to the use of derived information in decision-making processes. To create a web-based free and open sourced GIS that can work with different data formats by exchanging and presenting data as a real-time map on web.

The worth of land use: a GIS-emergy evaluation of natural and human-made capital.

Science.gov (United States)

Mellino, Salvatore; Buonocore, Elvira; Ulgiati, Sergio

2015-02-15

Natural systems make their natural capital and ecosystem services available to human economy. A careful analysis of the interplay between natural and human-made capital is needed to prevent natural capital being overexploited for present economic benefits, affecting lifestyles and wellbeing of future generations. In this study, the emergy synthesis is used to evaluate the natural and the human-made capital of Campania region (southern Italy) by accounting for the environmental support directly and indirectly provided by nature to resource generation. Furthermore, geographic information system (GIS) models are integrated with the emergy accounting procedure to generate maps of the spatial patterns of both natural and human-made capital distribution. Regional storages of natural and human-made capital are identified and evaluated in emergy units (seJ). The human-made capital of the Campania region (6.29E+24seJ) results to be about 11 times higher than the natural capital (5.69E+23seJ) due to the past and present exploitation of the natural resources needed to generate it over time. Moreover, by overlaying the total natural capital map and the total human-made capital map with a map of the protected areas within the region, only the 19% of the regional natural capital appears to be concentrated within protected areas, while most of it (81%) is concentrated outside. These findings suggest that the conservation of natural resources is also necessary outside protected areas by means of suitable policies, directives and investments. The human-made capital is mainly concentrated (88%) inside non-protected areas and interacts with the local natural capital. A management of the interactions between the two categories of wealth is crucial to prevent that the growth of human-made storages degrades the natural ecosystems and the environment. The proposed emergy-GIS framework reveals to be a useful tool for environmental planning and resource management aimed to conserve and

Application of raster-based GIS techniques in the siting of landfills in Trabzon Province, Turkey: a case study.

Science.gov (United States)

Yildirim, Volkan

2012-09-01

One of the most important steps in solid waste management is the selection of an appropriate landfill site. The site selection process requires the evaluation and analysis of several criteria. However, the traditional evaluation method is not sufficient for the site selection process. Geographical information system (GIS) technologies are effectively used in the process of site selection, which is a spatial problem. This article describes a raster GIS-based landfill site selection (LSS) method. This method utilizes a raster-based spatial database in which the factors affect the landfill site selection. The final product in this method is the cost surface map showing pixel-based values of the appropriate areas. Furthermore, this GIS-based LSS method was applied for the evaluation of two landfill sites in Trabzon Province in Turkey, for which the traditional evaluation method for site selection was used. The suitability values on the cost surface map of these two landfills have shown that these sites are not appropriate for a solid waste landfill. In conclusion, it was demonstrated that the method of raster GIS-based site selection gives more effective results than traditional methods.

Development of Web GIS-Based VFSMOD System with Three Modules for Effective Vegetative Filter Strip Design

Directory of Open Access Journals (Sweden)

Dong Soo Kong

2013-08-01

Full Text Available In recent years, Non-Point Source Pollution has been rising as a significant environmental issue. The sediment-laden water problem is causing serious impacts on river ecosystems not only in South Korea but also in most countries. The vegetative filter strip (VFS has been thought to be one of the most effective methods to reduce the transport of sediment to down-gradient area. However, the effective width of the VFS first needs to be determined before VFS installation in the field. To provide an easy-to-use interface with a scientific VFS modeling engine, the Web GIS-based VFSMOD system was developed in this study. The Web GIS-based VFSMOD uses the UH and VFSM executable programs from the VFSMOD-w model as core engines to simulate rainfall-runoff and sediment trapping. To provide soil information for a point of interest, the Google Map interface to the MapServer soil database system was developed using the Google Map API, Javascript, Perl/CGI, and Oracle DB programming. Three modules of the Web GIS-based VFSMOD system were developed for various VFS designs under single storm, multiple storm, and long-term period scenarios. These modules in the Web GIS-based VFSMOD system were applied to the study watershed in South Korea and these were proven as efficient tools for the VFS design for various purposes.

A GIS-based method for household recruitment in a prospective pesticide exposure study

Directory of Open Access Journals (Sweden)

Phillips Michael J

2008-04-01

Full Text Available Abstract Background Recent advances in GIS technology and remote sensing have provided new opportunities to collect ecologic data on agricultural pesticide exposure. Many pesticide studies have used historical or records-based data on crops and their associated pesticide applications to estimate exposure by measuring residential proximity to agricultural fields. Very few of these studies collected environmental and biological samples from study participants. One of the reasons for this is the cost of identifying participants who reside near study fields and analyzing samples obtained from them. In this paper, we present a cost-effective, GIS-based method for crop field selection and household recruitment in a prospective pesticide exposure study in a remote location. For the most part, our multi-phased approach was carried out in a research facility, but involved two brief episodes of fieldwork for ground truthing purposes. This method was developed for a larger study designed to examine the validity of indirect pesticide exposure estimates by comparing measured exposures in household dust, water and urine with records-based estimates that use crop location, residential proximity and pesticide application data. The study focused on the pesticide atrazine, a broadleaf herbicide used in corn production and one of the most widely-used pesticides in the U.S. Results We successfully used a combination of remotely-sensed data, GIS-based methods and fieldwork to select study fields and recruit participants in Illinois, a state with high corn production and heavy atrazine use. Our several-step process consisted of the identification of potential study fields and residential areas using aerial photography; verification of crop patterns and land use via site visits; development of a GIS-based algorithm to define recruitment areas around crop fields; acquisition of geocoded household-level data within each recruitment area from a commercial vendor; and

Comparison of ArcGIS and SAS Geostatistical Analyst to Estimate Population-Weighted Monthly Temperature for US Counties.

Science.gov (United States)

Xiaopeng, Q I; Liang, Wei; Barker, Laurie; Lekiachvili, Akaki; Xingyou, Zhang

Temperature changes are known to have significant impacts on human health. Accurate estimates of population-weighted average monthly air temperature for US counties are needed to evaluate temperature's association with health behaviours and disease, which are sampled or reported at the county level and measured on a monthly-or 30-day-basis. Most reported temperature estimates were calculated using ArcGIS, relatively few used SAS. We compared the performance of geostatistical models to estimate population-weighted average temperature in each month for counties in 48 states using ArcGIS v9.3 and SAS v 9.2 on a CITGO platform. Monthly average temperature for Jan-Dec 2007 and elevation from 5435 weather stations were used to estimate the temperature at county population centroids. County estimates were produced with elevation as a covariate. Performance of models was assessed by comparing adjusted R 2 , mean squared error, root mean squared error, and processing time. Prediction accuracy for split validation was above 90% for 11 months in ArcGIS and all 12 months in SAS. Cokriging in SAS achieved higher prediction accuracy and lower estimation bias as compared to cokriging in ArcGIS. County-level estimates produced by both packages were positively correlated (adjusted R 2 range=0.95 to 0.99); accuracy and precision improved with elevation as a covariate. Both methods from ArcGIS and SAS are reliable for U.S. county-level temperature estimates; However, ArcGIS's merits in spatial data pre-processing and processing time may be important considerations for software selection, especially for multi-year or multi-state projects.

Geospatial analysis based on GIS integrated with LADAR.

Science.gov (United States)

Fetterman, Matt R; Freking, Robert; Fernandez-Cull, Christy; Hinkle, Christopher W; Myne, Anu; Relyea, Steven; Winslow, Jim

2013-10-07

In this work, we describe multi-layered analyses of a high-resolution broad-area LADAR data set in support of expeditionary activities. High-level features are extracted from the LADAR data, such as the presence and location of buildings and cars, and then these features are used to populate a GIS (geographic information system) tool. We also apply line-of-sight (LOS) analysis to develop a path-planning module. Finally, visualization is addressed and enhanced with a gesture-based control system that allows the user to navigate through the enhanced data set in a virtual immersive experience. This work has operational applications including military, security, disaster relief, and task-based robotic path planning.

A positioning system for forest diseases and pests based on GIS and PTZ camera

International Nuclear Information System (INIS)

Wang, Z B; Zhao, F F; Wang, C B; Wang, L L

2014-01-01

Forest diseases and pests cause enormous economic losses and ecological damage every year in China. To prevent and control forest diseases and pests, the key is to get accurate information timely. In order to improve monitoring coverage rate and economize on manpower, a cooperative investigation model for forest diseases and pests is put forward. It is composed of video positioning system and manual labor reconnaissance with mobile GIS embedded in PDA. Video system is used to scan the disaster area, and is particularly effective on where trees are withered. Forest diseases prevention and control workers can check disaster area with PDA system. To support this investigation model, we developed a positioning algorithm and a positioning system. The positioning algorithm is based on DEM and PTZ camera. Moreover, the algorithm accuracy is validated. The software consists of 3D GIS subsystem, 2D GIS subsystem, video control subsystem and disaster positioning subsystem. 3D GIS subsystem makes positioning visual, and practically easy to operate. 2D GIS subsystem can output disaster thematic map. Video control subsystem can change Pan/Tilt/Zoom of a digital camera remotely, to focus on the suspected area. Disaster positioning subsystem implements the positioning algorithm. It is proved that the positioning system can observe forest diseases and pests in practical application for forest departments

GIS based generation of dynamic hydrological and land patch simulation models for rural watershed areas

Directory of Open Access Journals (Sweden)

M. Varga

2016-03-01

Full Text Available This paper introduces a GIS based methodology to generate dynamic process model for the simulation based analysis of a sensitive rural watershed. The Direct Computer Mapping (DCM based solution starts from GIS layers and, via the graph interpretation and graphical edition of the process network, the expert interface is able to integrate the field experts’ knowledge in the computer aided generation of the simulation model. The methodology was applied and tested for the Southern catchment basin of Lake Balaton, Hungary. In the simplified hydrological model the GIS description of nine watercourses, 121 water sections, 57 small lakes and 20 Lake Balaton compartments were mapped through the expert interface to the dynamic databases of the DCM model. The hydrological model involved precipitation, evaporation, transpiration, runoff, infiltration. The COoRdination of INformation on the Environment (CORINE land cover based simplified “land patch” model considered the effect of meteorological and hydrological scenarios on freshwater resources in the land patches, rivers and lakes. The first results show that the applied model generation methodology helps to build complex models, which, after validation can support the analysis of various land use, with the consideration of environmental aspects.

Using Web GIS for Public Health Education

Science.gov (United States)

Reed, Rajika E.; Bodzin, Alec M.

2016-01-01

An interdisciplinary curriculum unit that used Web GIS mapping to investigate malaria disease patterns and spread in relation to the environment for a high school Advanced Placement Environmental Science course was developed. A feasibility study was conducted to investigate the efficacy of the unit to promote geospatial thinking and reasoning…

Multimodale trafiknet i GIS (Multimodal Traffic Network in GIS)

DEFF Research Database (Denmark)

Kronbak, Jacob; Brems, Camilla Riff

1996-01-01

The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example.......The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example....

MEASURING LAND USES ACCESSIBILITY BY USING FUZZY MAJORITY GIS-BASED MULTICRITERIA DECISION ANALYSIS CASE STUDY: MALAYER CITY

Directory of Open Access Journals (Sweden)

A. Taravat

2014-10-01

Full Text Available Public spaces accessibility has become one of the important factors in urban planning. Therefore, considerable attention has been given to measure accessibility to public spaces on the UK, US and Canada, but there are few studies outside the anglophone world especially in developing countries such as Iran. In this study an attempt has been made to measure objective accessibility to public spaces (parks, school, library and administrative using fuzzy majority GIS-based multicriteria decision analysis. This method is for defining the priority for distribution of urban facilities and utilities as the first step towards elimination of social justice. In order to test and demonstrate the presented model, the comprehensive plan of Malayer city has been considered for ranking in three objectives and properties in view of index per capital (Green space, sport facilities and major cultural centers like library and access index. The results can be used to inform the local planning process and the GIS approach can be expanded into other local authority domains. The results shows that the distribution of facilities in Malayer city has followed on the base of cost benefit law and the human aspect of resource allocation programming of facilities (from centre to suburbs of the city.

Measuring Land Uses Accessibility by Using Fuzzy Majority Gis-Based Multicriteria Decision Analysis Case Study: Malayer City

Science.gov (United States)

Taravat, A.; Yari, A.; Rajaei, M.; Mousavian, R.

2014-10-01

Public spaces accessibility has become one of the important factors in urban planning. Therefore, considerable attention has been given to measure accessibility to public spaces on the UK, US and Canada, but there are few studies outside the anglophone world especially in developing countries such as Iran. In this study an attempt has been made to measure objective accessibility to public spaces (parks, school, library and administrative) using fuzzy majority GIS-based multicriteria decision analysis. This method is for defining the priority for distribution of urban facilities and utilities as the first step towards elimination of social justice. In order to test and demonstrate the presented model, the comprehensive plan of Malayer city has been considered for ranking in three objectives and properties in view of index per capital (Green space, sport facilities and major cultural centers like library and access index). The results can be used to inform the local planning process and the GIS approach can be expanded into other local authority domains. The results shows that the distribution of facilities in Malayer city has followed on the base of cost benefit law and the human aspect of resource allocation programming of facilities (from centre to suburbs of the city).

Integrating pipeline data management application and Google maps dataset on web based GIS application unsing open source technology Sharp Map and Open Layers

Energy Technology Data Exchange (ETDEWEB)

Wisianto, Arie; Sania, Hidayatus [PT PERTAMINA GAS, Bontang (Indonesia); Gumilar, Oki [PT PERTAMINA GAS, Jakarta (Indonesia)

2010-07-01

PT Pertamina Gas operates 3 pipe segments carrying natural gas from producers to PT Pupuk Kaltim in the Kalimantan area. The company wants to build a pipeline data management system consisting of pipeline facilities, inspections and risk assessments which would run on Geographic Information Systems (GIS) platforms. The aim of this paper is to present the integration of the pipeline data management system with GIS. A web based GIS application is developed using the combination of Google maps datasets with local spatial datasets. In addition, Open Layers is used to integrate pipeline data model and Google Map dataset into a single map display on Sharp Map. The GIS based pipeline data management system developed herein constitutes a low cost, powerful and efficient web based GIS solution.

Assessment of Grassland Health Based on Spatial Information Technology in Changji Autonomous Prefecture, Xinjiang

Science.gov (United States)

Du, M. J.; Zheng, J. H.; Mu, C.

2018-04-01

Based on the "pressure-state-response" (PSR) model, comprehensively applied GIS and RS techniques, 20 evaluation indicators were selected based on pressure, state and response, the entropy weight method was used to determine the weight of each index and build a grassland health evaluation system in Changji Prefecture, Xinjiang. Based on this, evaluation and dynamic analysis of grassland health in Changji Prefecture from 2000 to 2016, using GIS/RS technology, the trend of grassland health status in Changji is analyzed and studied. The results show that: 1) Grassland with low health leveld, lower health level, sub-health level, health level and high health level accounts for 1.46 %,27.67 %,38.35 %,29.21 % and 3.31 % of the total area of Changji. Qitai County, Hutubi County, and Manas County are lower health levels, Jimsar County, Changji City, and Mulei County are at a relatively high level, and Fukang City has a healthy level of health. 2) The level of grassland health in Changji County decreased slightly during the 17 years, accounting for 38.42 % of the total area. The area of 23,87 % showed a stable trend, and the improved area accounted for 37.31 % of the vertical surface area.

Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

Energy Technology Data Exchange (ETDEWEB)

Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Roberts, Billy J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-05

Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solar photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.

Design of Mobile Operation and Maintenance System Based on Power GIS and GPS

Directory of Open Access Journals (Sweden)

Jing TAO

2017-01-01

Full Text Available In order to solve the low efficiency of operation and maintenance and the problems of management coordination caused by the coexistence of off-line operation and maintenance and multi system coexistence in current power telecommunication operation and maintenance, this paper proposes a mobile operation and maintenance system based on power GIS and GPS location technology. The system is based on the C/S architecture, and the mobile operation and maintenance terminal is connected with the operation and maintenance management terminal through wireless and wired network. In addition to meeting basic business requirements, the system integrates power GIS functions to visually demonstrate communication resources, personnel, and failures. The staff can use the wireless mobile terminal which integrated GPS module for to operate and maintain, and can locate accurately in real time.

UN OPEN GIS CAPACITY BUILDING

Directory of Open Access Journals (Sweden)

A. Albertella

2017-07-01

Full Text Available The UN Open GIS Initiative is to identify and develop, under UN guidance, an Open Source GIS bundle that meets the requirements of UN operations, taking full advantage of the expertise of mission partners (partner nations, technology contributing countries, international organizations, academia, NGO’s, private sector. The project, started in 2016, is composed by 4 working groups. One of the working group is specifically related to Capacity Building, given its importance for the success of the project. UN Open GIS will be based on some existing open source geospatial software (packages and libraries with many extensions specifically developed. The users of the platform will be the UN staff supporting with mapping and GIS the peacekeeping missions. Therefore, they are generally expert of this specific domain, even if they are currently using proprietary software. UN Open GIS Capacity Building is specifically thought for covering this gap, providing them the suitable background about open source geospatial software in general and the education tailored to the solution that has been being developed within the project itself.

Applications of Mobile GIS in Forestry South Australia

Directory of Open Access Journals (Sweden)

D. T. Battad

2012-07-01

Full Text Available South Australian Forestry Corporation (ForestrySA had been actively investigating the applications of mobile GIS in forestry for the past few years. The main objective is to develop an integrated mobile GIS capability that allows staff to collect new spatial information, verify existing data, and remotely access and post data from the field. Two (2 prototype mobile GIS applications have been developed already using the Environmental Systems Research Institute (ESRI ARCGISR technology as the main spatial component. These prototype systems are the Forest Health Surveillance System and the Mobile GIS for Wetlands System. The Forest Health Surveillance System prototype is used primarily for aerial forest health surveillance. It was developed using a tablet PC with ArcMapR GIS. A customised toolbar was developed using ArcObjectsR in the Visual Basic 6 Integrated Development Environment (IDE. The resulting dynamic linked library provides a suite of custom tools which enables the following: - quickly create spatial features and attribute the data - full utilisation of global positioning system (GPS technology - excellent screen display navigation tools, i.e. pan, rotate map, capture of flight path - seamless integration of data into GIS as geodatabase (GDB feature classes - screen entry of text and conversion to annotation feature classes The Mobile GIS for Wetlands System prototype was developed for verifying existing wetland areas within ForestrySA’s plantation estate, collect new wetland data, and record wetland conditions. Mapping of actual wetlands within ForestrySA’s plantation estate is very critical because of the need to establish protection buffers around these features during the implementation of plantation operations. System development has been focussed on a mobile phone platform (HTC HD2R with WindowsR Mobile 6, ESRI’s ArcGISR Mobile software development kit (SDK employing ArcObjectsR written on C#.NET IDE, and ArcGIS Server

STUDY NOISE POLLUTION TYUMEN USING GIS

Directory of Open Access Journals (Sweden)

V. A. Dobryakova

2016-01-01

Full Text Available One of the most harmful factors of environment of the city is the noise, and its weight among the factors adversely affecting the life and health of the population has been increasing steadily [Sheina and etc., 2007; Polovinkina and etc., 2012]. Today, most major cities of the Russian Federation (70% have a high noise pollution problem. The system of support for the monitoring and control of acoustic situation in the city can be considered noise pollution electronic cards made using geographic information systems (GIS. There are two fundamentally different approaches to the selection of software for creation of noise maps. According to the first of them, use universal multifunctional complexes GIS (ArcGIS, MapInfo. According to the distribution of data points on the noise characteristics is created TIN model. A second approach to create noise maps using highly specialized software (MapNoise, SoundPLAN, Mitha, Cadna, ExNOISE et al.. To calculate noise propagation area is divided on the grid with a certain step, the most relevant mapping purposes. Calculation of noise levels is carried out in a grid cell by measurements based on diffraction and reflection of sound barriers and absorbing underlying surface. Noise pollution is also displayed using contour lines.

CyberGIS software: a synthetic review and integration roadmap

Energy Technology Data Exchange (ETDEWEB)

Wang, Shaowen [University of Illinois, Urbana-Champaign; Anselin, Luc [Arizona State University; Bhaduri, Budhendra L [ORNL; Cosby, Christopher [University Navstar Consortium, Boulder, CO; Goodchild, Michael [University of California, Santa Barbara; Liu, Yan [University of Illinois, Urbana-Champaign; Nygers, Timothy L. [University of Washington, Seattle

2013-01-01

CyberGIS defined as cyberinfrastructure-based geographic information systems (GIS) has emerged as a new generation of GIS representing an important research direction for both cyberinfrastructure and geographic information science. This study introduces a 5-year effort funded by the US National Science Foundation to advance the science and applications of CyberGIS, particularly for enabling the analysis of big spatial data, computationally intensive spatial analysis and modeling (SAM), and collaborative geospatial problem-solving and decision-making, simultaneously conducted by a large number of users. Several fundamental research questions are raised and addressed while a set of CyberGIS challenges and opportunities are identified from scientific perspectives. The study reviews several key CyberGIS software tools that are used to elucidate a vision and roadmap for CyberGIS software research. The roadmap focuses on software integration and synthesis of cyberinfrastructure, GIS, and SAM by defining several key integration dimensions and strategies. CyberGIS, based on this holistic integration roadmap, exhibits the following key characteristics: high-performance and scalable, open and distributed, collaborative, service-oriented, user-centric, and community-driven. As a major result of the roadmap, two key CyberGIS modalities gateway and toolkit combined with a community-driven and participatory approach have laid a solid foundation to achieve scientific breakthroughs across many geospatial communities that would be otherwise impossible.

Paper-Based GIS: A Practical Answer to the Implementation of GIS Education into Resource-Poor Schools in South Africa

Science.gov (United States)

Breetzke, Gregory; Eksteen, Sanet; Pretorius, Erika

2011-01-01

Geographical information systems (GIS) were phased into the geography curriculum of South African schools from 2006-2008 as part of the National Curriculum Statement (NCS) for grades 10-12. Since its introduction, GIS education in schools across the country has been met with a number of challenges including the cost of purchasing the hardware and…

Spatio-temporal trend analysis of precipitation in Guizhou province based on GIS technology

Science.gov (United States)

Wu, Jianfeng; Zhang, Fengtai; Pan, Yuanfen; Li, Wei; Cao, Guangjie; An, Youzhi

2018-02-01

Precipitation changes are closely related to human production and life. Based on the data of Guizhou Province from 1998 to 2012, the temporal and spatial characteristics of precipitation in Guizhou Province were analyzed from the annual, seasonal and monthly scales by linear trend analysis and ArcGIS kriging spatial interpolation. The results show that the annual precipitation is mainly concentrated in the summer, accounting for 47.6% of the year, followed by spring accounted for 26.9%, autumn accounted for 18.6% in winter accounted for 6.9%. In the time, the precipitation in the study area shows a decreasing trend in the annual scale, seasonal scale and July. The overall spatial precipitation distribution shows a decreasing trend from the east to the west. The precipitation also in the south is higher than the northern region.

Map-IT! A Web-Based GIS Tool for Watershed Science Education.

Science.gov (United States)

Curtis, David H.; Hewes, Christopher M.; Lossau, Matthew J.

This paper describes the development of a prototypic, Web-accessible GIS solution for K-12 science education and citizen-based watershed monitoring. The server side consists of ArcView IMS running on an NT workstation. The client is built around MapCafe. The client interface, which runs through a standard Web browser, supports standard MapCafe…

The Design and Implement of Tourism Information System Based on GIS

Science.gov (United States)

Chunchang, Fu; Nan, Zhang

From the geographical information system concept, discusses the main contents of the geographic information system, and the current of the geographic information system key technological measures of tourism information system, the application of tourism information system for specific requirements and goals, and analyzes a relational database model based on the tourist information system in GIS application methods of realization.

GIS-Based KW-GIUH hydrological model of semiarid catchments: The case of Faria Catchment, Palestine

International Nuclear Information System (INIS)

Shadeed, S.; Shaheen, H.; Jayyousi, A.

2007-01-01

Among the most basic challenges of hydrology are the quantitative understanding of the processes of runoff generation and prediction of flow hydrographs. Traditional techniques have been widely applied for the estimation of runoff hydrographs of gauged catchments using historical rainfall-runoff data and unit hydrographs. Such procedures are questioned as to their reliability and their application to ungauged, arid and semiarid catchments. To overcome such difficulties, the use of physically based rainfall-runoff process of Faria Catchment using the lately developed KW-GIUH. Faria catchment, located in the northeastern part of the West Bank, Palestine, is characterized as a semiarid region with annual rainfall depths ranging on average from 150 to 640 mm at both ends of the catchment. The Geographical Information System (GIS) techniques were used to shape the geomorphological features of the catchment. A GIS based KW-GIUH hydrological model was used to stimulate the rainfall-runoff process in the three sub-catchments of Faria, namely: Al-Badan, Al-Faria and Al-Malaqi. The simulated runoff hydrographs proved that the GIS-based KW-GIUH model is applicable to semiarid regions and can be used to estimate the unit hydrographs in the West Bank catchments. (author)

Paper2GIS: A self-digitising, paper-based PPGIS

OpenAIRE

Huck, Jonathan; Dunning, Isobel; Lee, Pierre; Lowe, Thomas; Quek, Ervine; Weerasinghe, Sandarau; Wintie, Dominic

2017-01-01

This paper examines two established problems in public participatory GIS: affording participants the flexibility to represent geographical entities in a way that reflects how they think about the world; and the ‘digital divide’ in order to promote representative participation in locations that do not have good access to computing or the Internet. These two issues will be explored through the presentation of a novel prototype public participatory GIS software package, which allows the rapid au...

GIS-based hydrogeological databases and groundwater modelling

Science.gov (United States)

Gogu, Radu Constantin; Carabin, Guy; Hallet, Vincent; Peters, Valerie; Dassargues, Alain

2001-12-01

Reliability and validity of groundwater analysis strongly depend on the availability of large volumes of high-quality data. Putting all data into a coherent and logical structure supported by a computing environment helps ensure validity and availability and provides a powerful tool for hydrogeological studies. A hydrogeological geographic information system (GIS) database that offers facilities for groundwater-vulnerability analysis and hydrogeological modelling has been designed in Belgium for the Walloon region. Data from five river basins, chosen for their contrasting hydrogeological characteristics, have been included in the database, and a set of applications that have been developed now allow further advances. Interest is growing in the potential for integrating GIS technology and groundwater simulation models. A "loose-coupling" tool was created between the spatial-database scheme and the groundwater numerical model interface GMS (Groundwater Modelling System). Following time and spatial queries, the hydrogeological data stored in the database can be easily used within different groundwater numerical models. Résumé. La validité et la reproductibilité de l'analyse d'un aquifère dépend étroitement de la disponibilité de grandes quantités de données de très bonne qualité. Le fait de mettre toutes les données dans une structure cohérente et logique soutenue par les logiciels nécessaires aide à assurer la validité et la disponibilité et fournit un outil puissant pour les études hydrogéologiques. Une base de données pour un système d'information géographique (SIG) hydrogéologique qui offre toutes les facilités pour l'analyse de la vulnérabilité des eaux souterraines et la modélisation hydrogéologique a été établi en Belgique pour la région Wallonne. Les données de cinq bassins de rivières, choisis pour leurs caractéristiques hydrogéologiques différentes, ont été introduites dans la base de données, et un ensemble d

Towards a Conceptual Framework for WikiGIS

Directory of Open Access Journals (Sweden)

Wided Batita

2014-10-01

Full Text Available As an emerging complex concept, GeoDesign requires an innovative theoretical basis, tools, supports and practices. For this reason, we propose a new concept, “WikiGIS”, designed to answer some dimensions of the GeoDesign process. WikiGIS focuses on the needs of GeoDesign, but we leave the door open for future improvement when tested in other areas that may have additional needs. WikiGIS is built on Web 2.0 technologies—and primarily on wiki—to manage the tracking of participants’ editing (i.e., managing the contributions history. It also offers GIS functions for geoprocessing and a design-based approach for sketching proposals. One of the main strengths of WikiGIS is its ability to manage the traceability of contributions with an easy and dynamical access, data quality and deltification. The core of this paper consists of presenting a conceptual framework for WikiGIS using UML diagrams. A user interface is presented later to show how our WikiGIS proposal works. This interface is simply a means to illustrate the concepts underlying WikiGIS.

Assessment of water pollution induced by human activities in Burullus Lake using Landsat 8 operational land imager and GIS

Directory of Open Access Journals (Sweden)

Ahmed El-Zeiny

2017-04-01

Full Text Available Burullus Lake is the second largest lake along the Mediterranean Sea and represents one of the most subjected lakes to pollution at the delta’s coastline. The present study explores the use of Landsat data and GIS for assessing water pollution at Burullus Lake, Egypt. Multi-spectral Landsat-8 OLI image dated 2015 provided the necessary information to this study. Radiometric and atmospheric corrections were applied to the image. Land use/cover map was obtained to identify natural resources and types of human activities in the area surrounding the Lake. Three previously developed water quality empirical models for BOD, total nitrogen (TN and total phosphorus (TP were applied on the calibrated image. Then, a GIS model was generated to identify areas recording high levels of BOD, TN and TP. Results confirmed that the Lake water is subjected to pollution from multiple sources; particularly domestic and agricultural drains. Shallow water (i.e. Lake Shores, where human activities are influencing, reported high levels of water studied pollutants. The model indicated that south western and north eastern parts of the Lake are the most polluted parts, recording relatively high levels of BOD, TN and TP; >4.46 mg L−1, >18.33 mg L−1 and >15.59 mg L−1, respectively. Results were ascertained based on water quality investigations in relevant research studies on the Lake. It was concluded that Burullus Lake is extensively subjected to interrupting human activities which have a great negative impact on water quality. Also data-observation techniques and water quality empirical models were successful in assessing and mapping water pollution.

An Ontology-Based GIS for Genomic Data Management of Rumen Microbes.

Science.gov (United States)

Jelokhani-Niaraki, Saber; Tahmoorespur, Mojtaba; Minuchehr, Zarrin; Nassiri, Mohammad Reza

2015-03-01

During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS)-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data.

A geographic approach to modelling human exposure to traffic air pollution using GIS

Energy Technology Data Exchange (ETDEWEB)

Solvang Jensen, S.

1998-10-01

A new exposure model has been developed that is based on a physical, single media (air) and single source (traffic) micro environmental approach that estimates traffic related exposures geographically with the postal address as exposure indicator. The micro environments: residence, workplace and street (road user exposure) may be considered. The model estimates outdoor levels for selected ambient air pollutants (benzene, CO, NO{sub 2} and O{sub 3}). The influence of outdoor air pollution on indoor levels can be estimated using average (I/O-ratios. The model has a very high spatial resolution (the address), a high temporal resolution (one hour) and may be used to predict past, present and future exposures. The model may be used for impact assessment of control measures provided that the changes to the model inputs are obtained. The exposure model takes advantage of a standard Geographic Information System (GIS) (ArcView and Avenue) for generation of inputs, for visualisation of input and output, and uses available digital maps, national administrative registers and a local traffic database, and the Danish Operational Street Pollution Model (OSPM). The exposure model presents a new approach to exposure determination by integration of digital maps, administrative registers, a street pollution model and GIS. New methods have been developed to generate the required input parameters for the OSPM model: to geocode buildings using cadastral maps and address points, to automatically generate street configuration data based on digital maps, the BBR and GIS; to predict the temporal variation in traffic and related parameters; and to provide hourly background levels for the OSPM model. (EG) 109 refs.

Statistical Validation of a Web-Based GIS Application and Its Applicability to Cardiovascular-Related Studies.

Science.gov (United States)

Lee, Jae Eun; Sung, Jung Hye; Malouhi, Mohamad

2015-12-22

There is abundant evidence that neighborhood characteristics are significantly linked to the health of the inhabitants of a given space within a given time frame. This study is to statistically validate a web-based GIS application designed to support cardiovascular-related research developed by the NIH funded Research Centers in Minority Institutions (RCMI) Translational Research Network (RTRN) Data Coordinating Center (DCC) and discuss its applicability to cardiovascular studies. Geo-referencing, geocoding and geospatial analyses were conducted for 500 randomly selected home addresses in a U.S. southeastern Metropolitan area. The correlation coefficient, factor analysis and Cronbach's alpha (α) were estimated to quantify measures of the internal consistency, reliability and construct/criterion/discriminant validity of the cardiovascular-related geospatial variables (walk score, number of hospitals, fast food restaurants, parks and sidewalks). Cronbach's α for CVD GEOSPATIAL variables was 95.5%, implying successful internal consistency. Walk scores were significantly correlated with number of hospitals (r = 0.715; p restaurants (r = 0.729; p application were internally consistent and demonstrated satisfactory validity. Therefore, the GIS application may be useful to apply to cardiovascular-related studies aimed to investigate potential impact of geospatial factors on diseases and/or the long-term effect of clinical trials.

A Javascript GIS Platform Based on Invocable Geospatial Web Services

Directory of Open Access Journals (Sweden)

Konstantinos Evangelidis

2018-04-01

Full Text Available Semantic Web technologies are being increasingly adopted by the geospatial community during last decade through the utilization of open standards for expressing and serving geospatial data. This was also dramatically assisted by the ever-increasing access and usage of geographic mapping and location-based services via smart devices in people’s daily activities. In this paper, we explore the developmental framework of a pure JavaScript client-side GIS platform exclusively based on invocable geospatial Web services. We also extend JavaScript utilization on the server side by deploying a node server acting as a bridge between open source WPS libraries and popular geoprocessing engines. The vehicle for such an exploration is a cross platform Web browser capable of interpreting JavaScript commands to achieve interaction with geospatial providers. The tool is a generic Web interface providing capabilities of acquiring spatial datasets, composing layouts and applying geospatial processes. In an ideal form the end-user will have to identify those services, which satisfy a geo-related need and put them in the appropriate row. The final output may act as a potential collector of freely available geospatial web services. Its server-side components may exploit geospatial processing suppliers composing that way a light-weight fully transparent open Web GIS platform.

3D GIS spatial operation based on extended Euler operators

Science.gov (United States)

Xu, Hongbo; Lu, Guonian; Sheng, Yehua; Zhou, Liangchen; Guo, Fei; Shang, Zuoyan; Wang, Jing

2008-10-01

The implementation of 3 dimensions spatial operations, based on certain data structure, has a lack of universality and is not able to treat with non-manifold cases, at present. ISO/DIS 19107 standard just presents the definition of Boolean operators and set operators for topological relationship query, and OGC GeoXACML gives formal definitions for several set functions without implementation detail. Aiming at these problems, based mathematical foundation on cell complex theory, supported by non-manifold data structure and using relevant research in the field of non-manifold geometry modeling for reference, firstly, this paper according to non-manifold Euler-Poincaré formula constructs 6 extended Euler operators and inverse operators to carry out creating, updating and deleting 3D spatial elements, as well as several pairs of supplementary Euler operators to convenient for implementing advanced functions. Secondly, we change topological element operation sequence of Boolean operation and set operation as well as set functions defined in GeoXACML into combination of extended Euler operators, which separates the upper functions and lower data structure. Lastly, we develop underground 3D GIS prototype system, in which practicability and credibility of extended Euler operators faced to 3D GIS presented by this paper are validated.

GIS and RS-based modelling of potential natural hazard areas in Pehchevo municipality, Republic of Macedonia

Directory of Open Access Journals (Sweden)

Milevski Ivica

2013-01-01

Full Text Available In this paper, one approach of Geographic Information System (GIS and Remote Sensing (RS assessment of potential natural hazard areas (excess erosion, landslides, flash floods and fires is presented. For that purpose Pehchevo Municipality in the easternmost part of the Republic of Macedonia is selected as a case study area because of high local impact of natural hazards on the environment, social-demographic situation and local economy. First of all, most relevant static factors for each type of natural hazard are selected (topography, land cover, anthropogenic objects and infrastructure. With GIS and satellite imagery, multi-layer calculation is performed based on available traditional equations, clustering or discreditation procedures. In such way suitable relatively “static” natural hazard maps (models are produced. Then, dynamic (mostly climate related factors are included in previous models resulting in appropriate scenarios correlated with different amounts of precipitation, temperature, wind direction etc. Finally, GIS based scenarios are evaluated and tested with field check or very fine resolution Google Earth imagery showing good accuracy. Further development of such GIS models in connection with automatic remote meteorological stations and dynamic satellite imagery (like MODIS will provide on-time warning for coming natural hazard avoiding potential damages or even causalities.

The study of metal contamination in urban soils of Hong Kong using a GIS-based approach

International Nuclear Information System (INIS)

Li Xiangdong; Lee Siulan; Wong Szechung; Shi Wenzhong; Thornton, Iain

2004-01-01

The study of regional variations and the anthropogenic contamination by metals of soils is very important for environmental planning and monitoring in urban areas. An extensive survey was conducted in the highly urbanized Kowloon area (46.9 km 2 ) of Hong Kong, using a systematic sampling strategy with a sampling density of 3-5 composite soil samples (0-15 cm) per km 2 . Geochemical maps of 'total' metals (Cd, Cr, Cu, Ni, Pb and Zn) from strong acid extraction in the surface soils were produced based on geographical information system (GIS) technology. A significant spatial relationship was found for Ni, Cu, Pb and Zn in the soils using a GIS-based analysis, suggesting that these metal contaminants in the soils of the Kowloon area had common sources. Several hot-spot areas of metal contamination were identified from the composite metal geochemical map, mainly in the old industrial and residential areas. A further GIS analysis revealed that road junctions, major roads and industrial buildings were possible sources of heavy metals in the urban soils. The Pb isotope composition of the contaminated soils showed clear anthropogenic origins. - GIS can be used to identify soil contamination hot-spot areas and to assess potential pollutant sources in an urban community

Assessment of Wave Energy in the South China Sea Based on GIS Technology

Directory of Open Access Journals (Sweden)

Gang Lin

2017-01-01

Full Text Available China is now the world’s largest user of coal and also has the highest greenhouse gas emissions associated with the mining and use of coal. Under today’s enormous pressures of the growing shortage of conventional energy sources and the need for emission reductions, the search for clean energy is the most effective strategy to address the energy crisis and global warming. This study utilized satellite remote sensing technology, geographic information system (GIS technology, and simulated wave data for the South China Sea. The characteristic features of the wave energy were obtained by analysis through the wave resource assessment formula and the results were stored in a GIS database. Software for the evaluation of wave energy in the South China Sea was written. The results should provide accurate, efficient references for wave energy researchers and decision-makers. Based on a 24-year WW3 model simulation wave data and GIS technology, this study presented the characteristic of the wave energy in the SCS; results demonstrated that the SCS has the feasibility and viability for wave energy farming.

Using GIS Maps to Improve Diabetes Prevention in New York

Centers for Disease Control (CDC) Podcasts

2014-02-26

This podcast features Rachael Ruberto, MPH, New York State Department of Health research scientist and lead author of PCD’s most recent Geographic Information Systems (GIS) Snapshots article. Rachael provides an overview of her article and how GIS was used for the analysis of diabetes prevention in New York.  Created: 2/26/2014 by Preventing Chronic Disease (PCD), National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 2/26/2014.

Titanic exploration with GIS

Science.gov (United States)

Kerski, J.J.

2004-01-01

To help teachers and students investigate one of the world's most famous historical events using the geographic perspective and GIS tools and methods, the U.S. Geological Survey (USGS) created a set of educational lessons based on the RMS Titanic's April 1912 sailing. With these lessons, student researchers can learn about latitude and longitude, map projections, ocean currents, databases, maps, and images through the analysis of the route, warnings, sinking, rescue, and eventual discovery of the submerged ocean liner in 1985. They can also consider the human and physical aspects of the maiden voyage in the North Atlantic Ocean at a variety of scales, from global to regional to local. Likewise, their investigations can reveal how the sinking of the Titanic affected future shipping routes.

GIS and correlation analysis of geo-environmental variables ...

African Journals Online (AJOL)

Key words: Correlation, GIS, malaria geography, malaria incidence ... problems, as it has created the possibility for geocoding, extracting and spatial analysis of health ...... Bulletin of the World Health Organization, 78(12), 1438–1444. Carter ...

Web-based GIS: the vector-borne disease airline importation risk (VBD-AIR) tool.

Science.gov (United States)

Huang, Zhuojie; Das, Anirrudha; Qiu, Youliang; Tatem, Andrew J

2012-08-14

Over the past century, the size and complexity of the air travel network has increased dramatically. Nowadays, there are 29.6 million scheduled flights per year and around 2.7 billion passengers are transported annually. The rapid expansion of the network increasingly connects regions of endemic vector-borne disease with the rest of the world, resulting in challenges to health systems worldwide in terms of vector-borne pathogen importation and disease vector invasion events. Here we describe the development of a user-friendly Web-based GIS tool: the Vector-Borne Disease Airline Importation Risk Tool (VBD-AIR), to help better define the roles of airports and airlines in the transmission and spread of vector-borne diseases. Spatial datasets on modeled global disease and vector distributions, as well as climatic and air network traffic data were assembled. These were combined to derive relative risk metrics via air travel for imported infections, imported vectors and onward transmission, and incorporated into a three-tier server architecture in a Model-View-Controller framework with distributed GIS components. A user-friendly web-portal was built that enables dynamic querying of the spatial databases to provide relevant information. The VBD-AIR tool constructed enables the user to explore the interrelationships among modeled global distributions of vector-borne infectious diseases (malaria. dengue, yellow fever and chikungunya) and international air service routes to quantify seasonally changing risks of vector and vector-borne disease importation and spread by air travel, forming an evidence base to help plan mitigation strategies. The VBD-AIR tool is available at http://www.vbd-air.com. VBD-AIR supports a data flow that generates analytical results from disparate but complementary datasets into an organized cartographical presentation on a web map for the assessment of vector-borne disease movements on the air travel network. The framework built provides a flexible

Using GIS Maps to Improve Diabetes Prevention in New York

Centers for Disease Control (CDC) Podcasts

This podcast features Rachael Ruberto, MPH, New York State Department of Health research scientist and lead author of PCD’s most recent Geographic Information Systems (GIS) Snapshots article. Rachael provides an overview of her article and how GIS was used for the analysis of diabetes prevention in New York.

[Ecological environmental quality assessment of Hangzhou urban area based on RS and GIS].

Science.gov (United States)

Xu, Pengwei; Zhao, Duo

2006-06-01

In allusion to the shortage of traditional ecological environmental quality assessment, this paper studied the spatial distribution of assessing factors at a mid-small scale, and the conversion of integer character to girding assessing cells. The main assessing factors including natural environmental condition, environmental quality, natural landscape and urbanization pressure, which were classified into four types with about eleven assessing factors, were selected from RS images and GIS-spatial analyzing environmental quality vector graph. Based on GIS, a comprehensive assessment model for the ecological environmental quality in Hangzhou urban area was established. In comparison with observed urban heat island effects, the assessment results were in good agreement with the ecological environmental quality in the urban area of Hangzhou.

Exploring the human body space: A geographical information system based anatomical atlas

Directory of Open Access Journals (Sweden)

Antonio Barbeito

2016-06-01

Full Text Available Anatomical atlases allow mapping the anatomical structures of the human body. Early versions of these systems consisted of analogical representations with informative text and labeled images of the human body. With computer systems, digital versions emerged and the third and fourth dimensions were introduced. Consequently, these systems increased their efficiency, allowing more realistic visualizations with improved interactivity and functionality. The 4D atlases allow modeling changes over time on the structures represented. The anatomical atlases based on geographic information system (GIS environments allow the creation of platforms with a high degree of interactivity and new tools to explore and analyze the human body. In this study we expand the functions of a human body representation system by creating new vector data, topology, functions, and an improved user interface. The new prototype emulates a 3D GIS with a topological model of the human body, replicates the information provided by anatomical atlases, and provides a higher level of functionality and interactivity. At this stage, the developed system is intended to be used as an educational tool and integrates into the same interface the typical representations of surface and sectional atlases.

An Ontology-Based GIS for Genomic Data Management of Rumen Microbes

Directory of Open Access Journals (Sweden)

Saber Jelokhani-Niaraki

2015-03-01

Full Text Available During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data.

An Ontology-Based GIS for Genomic Data Management of Rumen Microbes

Science.gov (United States)

Jelokhani-Niaraki, Saber; Minuchehr, Zarrin; Nassiri, Mohammad Reza

2015-01-01

During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS)-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data. PMID:25873847

INTEGRATION OF GIS AND BIM FOR INDOOR GEOVISUAL ANALYTICS

Directory of Open Access Journals (Sweden)

B. Wu

2016-06-01

Full Text Available This paper presents an endeavour of integration of GIS (Geographical Information System and BIM (Building Information Modelling for indoor geovisual analytics. The merits of two types of technologies, GIS and BIM are firstly analysed in the context of indoor environment. GIS has well-developed capabilities of spatial analysis such as network analysis, while BIM has the advantages for indoor 3D modelling and dynamic simulation. This paper firstly investigates the important aspects for integrating GIS and BIM. Different data standards and formats such as the IFC (Industry Foundation Classes and GML (Geography Markup Language are discussed. Their merits and limitations in data transformation between GIS and BIM are analysed in terms of semantic and geometric information. An optimized approach for data exchange between GIS and BIM datasets is then proposed. After that, a strategy of using BIM for 3D indoor modelling, GIS for spatial analysis, and BIM again for visualization and dynamic simulation of the analysis results is presented. Based on the developments, this paper selects a typical problem, optimized indoor emergency evacuation, to demonstrate the integration of GIS and BIM for indoor geovisual analytics. The block Z of the Hong Kong Polytechnic University is selected as a test site. Detailed indoor and outdoor 3D models of the block Z are created using a BIM software Revit. The 3D models are transferred to a GIS software ArcGIS to carry out spatial analysis. Optimized evacuation plans considering dynamic constraints are generated based on network analysis in ArcGIS assuming there is a fire accident inside the building. The analysis results are then transferred back to BIM software for visualization and dynamic simulation. The developed methods and results are of significance to facilitate future development of GIS and BIM integrated solutions in various applications.

Georeferenced Population Datasets of Mexico (GEO-MEX): Raster Based GIS Coverage of Mexican Population

Data.gov (United States)

National Aeronautics and Space Administration — The Raster Based GIS Coverage of Mexican Population is a gridded coverage (1 x 1 km) of Mexican population. The data were converted from vector into raster. The...

GIS-Based Education Course for Bachelor of Management Program in the Lomonosov Moscow State University Business School

Science.gov (United States)

Pirogov, A.

2014-04-01

An optional course, "Geographical Aspects of Business" in the framework of the Bachelor of management program in the Lomonosov Moscow State University Business School is setting the goal to introduce future discipline specialists with geographical topics of current interest for management and provide knowledge, skills and expertise of geospatial analysis and the use of geoinformation technologies in finding solutions to economic and managerial tasks. The students' feedback shows interest and demand for such a course for management students. The course has an interdisciplinary links with the main subjects such as marketing, public administration, visual communication, etc., and is based on the set of business cases dealing with Web-GIS Services, LBS, Geomarketing, Spatial analysis, etc. Open Data and corporate geodata sets are used. The pragmatist approach is selected for successful accomplishment of the course's goal, which is based on using Web-GIS tools. The Geomixer - a free web- GIS product by the company SCANEX - is chosen to be one of them. The principle "I do - I analyze" helps to minimize the theoretic constituent of the course improving the outcome of the classes. Owing to innovative methods of teaching, the educational goal of the course is achieved to the full scope despite the small number of allocated hours. The classes surely improve both the general level of geographic competence of students and provide them with the skills to work with GIS. Such optional courses will undoubtedly contribute to the development of GIS-education in management administration.

Bridging international law and rights-based litigation: mapping health-related rights through the development of the Global Health and Human Rights Database.

Science.gov (United States)

Meier, Benjamin Mason; Cabrera, Oscar A; Ayala, Ana; Gostin, Lawrence O

2012-06-15

The O'Neill Institute for National and Global Health Law at Georgetown University, the World Health Organization, and the Lawyers Collective have come together to develop a searchable Global Health and Human Rights Database that maps the intersection of health and human rights in judgments, international and regional instruments, and national constitutions. Where states long remained unaccountable for violations of health-related human rights, litigation has arisen as a central mechanism in an expanding movement to create rights-based accountability. Facilitated by the incorporation of international human rights standards in national law, this judicial enforcement has supported the implementation of rights-based claims, giving meaning to states' longstanding obligations to realize the highest attainable standard of health. Yet despite these advancements, there has been insufficient awareness of the international and domestic legal instruments enshrining health-related rights and little understanding of the scope and content of litigation upholding these rights. As this accountability movement evolves, the Global Health and Human Rights Database seeks to chart this burgeoning landscape of international instruments, national constitutions, and judgments for health-related rights. Employing international legal research to document and catalogue these three interconnected aspects of human rights for the public's health, the Database's categorization by human rights, health topics, and regional scope provides a comprehensive means of understanding health and human rights law. Through these categorizations, the Global Health and Human Rights Database serves as a basis for analogous legal reasoning across states to serve as precedents for future cases, for comparative legal analysis of similar health claims in different country contexts, and for empirical research to clarify the impact of human rights judgments on public health outcomes. Copyright © 2012 Meier, Nygren

Remote supervision of GIS monitoring system

Energy Technology Data Exchange (ETDEWEB)

Pannunzio, J.; Juge, P.; Ficheux, A.; Rayon, J.L. [Areva T and D Automation Canada Inc., Monteal, PQ (Canada)

2007-07-01

Operators of gas-insulated substations (GIS) are increasingly concerned with failure prevention, scheduled maintenance, personnel safety and shortage of maintenance crews. Until recently, the density levels of the insulating gas sulfur hexafluoride (SF6) was the only parameter controlled in gas-insulated substations. Modern digital type control and monitoring equipment have been widely used in the past decade. Remote indication of gas density and status of dynamic components was made possible and shown on local control panels. Modern GIS monitoring systems offer features such as SF6 monitoring, SF6 leakage trends, internal arc localization and detection. The required information is recorded in a local computer and displaced onto a local human machine interface (HMI) or a local industrial PC mounted next to the GIS. These monitoring systems are used as decision making tools to facilitate maintenance activities and optimize the management of assets. This paper presented the latest developments in digital monitoring systems in terms of modern digital architecture; management of information flows between monitoring systems and control systems; operation of remote supervision; configuration of high voltage substations and information sharing; and, types of links between GIS room and remote supervision. This paper also demonstrated what can be achieved by moving the central HMI of a GIS monitoring system to the decision-making centres. It was shown that integrated features that allow remote on-line or automated management have reached an acceptable level of reliability and comfort for operators. 5 figs.

Use of GIS in the estimation and development of risk reduction technology

International Nuclear Information System (INIS)

Ha, Jae Joo

1998-03-01

The occurrence probability of a severe accident in the nuclear power plant is very small because the safety of a plant and the public is considered in the design and operation of a nuclear power plant. However, if a severe accident occurs, the establishment of a reduction strategy of damages resulting from it is essential because the effect of it on the human and the environment is very large. The important criterion which determines the severity of an accident is risk, which is defined as the product of its frequently and the consequence. The establishment of countermeasures in order to estimate and reduce risks quantitatively can be a very powerful tool to minimize the effect of an accident on the human and the environment. The research on the establishment of a framework which integrates a geographic information system (GIS), a database management system (DBMS), and decision making support system (DMSS) is considered very actively. Based on these systems, we can accomplish the estimation and display of risks and the development of reduction methodologies which are essential parts of an accident management of a nuclear power plant. The GIS plays a role to support users to systematize and comprehend spatial relationships of information which are necessary for the decision making. Through the DBMS, we can establish and manage spatial and attribute data, and use them in the query and selection. The DMSS is a computer-based information system which makes a necessary decision easily. In this study, we reviewed the fundamental concepts of a GIS and examined the methodology for the use of it in the estimation and display of risks. Also, we established the fundamental GIS platform of a Yonggwang site and the necessary database systems for the estimation of risks. (author). 17 refs., 9 tabs., 34 figs

Climate Impact and GIS Education Using Realistic Applications of Data.gov Thematic Datasets in a Structured Lesson-Based Workbook

Science.gov (United States)

Amirazodi, S.; Griffin, R.; Bugbee, K.; Ramachandran, R.; Weigel, A. M.

2016-12-01

This project created a workbook which teaches Earth Science education undergraduate and graduate students through guided in-class activities and take-home assignments organized around climate topics which use GIS to teach key geospatial analysis techniques and cartography skills. The workbook is structured to the White House's Data.gov climate change themes, which include Coastal Flooding, Ecosystem Vulnerability, Energy Infrastructure, Arctic, Food Resilience, Human Health, Transportation, Tribal Nations, Water. Each theme provides access to framing questions, associated data, interactive tools, and further reading (e.g. the US Climate Resilience Toolkit and National Climate Assessment). Lessons make use of the respective theme's available resources. The structured thematic approach is designed to encourage independent exploration. The goal is to teach climate concepts and concerns, GIS techniques and approaches, and effective cartographic representation and communication of results; and foster a greater awareness of publically available resources and datasets. To reach more audiences more effectively, a two level approach was used. Level 1 serves as an introductory study and relies on only freely available interactive tools to reach audiences with fewer resources and less familiarity. Level 2 presents a more advanced case study, and focuses on supporting common commercially available tool use and real-world analysis techniques.

Climate Impact and GIS Education Using Realistic Applications of Data.gov Thematic Datasets in a Structured Lesson-Based Workbook

Science.gov (United States)

Amirazodi, Sara; Griffin, Robert; Bugbee, Kaylin; Ramachandran, Rahul; Weigel, Amanda

2016-01-01

This project created a workbook which teaches Earth Science to undergraduate and graduate students through guided in-class activities and take-home assignments organized around climate topics which use GIS to teach key geospatial analysis techniques and cartography skills. The workbook is structured to the White House's Data.gov climate change themes, which include Coastal Flooding, Ecosystem Vulnerability, Energy Infrastructure, Arctic, Food Resilience, Human Health, Transportation, Tribal Nations, and Water. Each theme provides access to framing questions, associated data, interactive tools, and further reading (e.g. The US Climate Resilience Toolkit and National Climate Assessment). Lessons make use of the respective theme's available resources. The structured thematic approach is designed to encourage independent exploration. The goal is to teach climate concepts and concerns, GIS techniques and approaches, and effective cartographic representation and communication results; and foster a greater awareness of publicly available resources and datasets. To reach more audiences more effectively, a two level approach was used. Level 1 serves as an introductory study and relies on only freely available interactive tools to reach audiences with fewer resources and less familiarity. Level 2 presents a more advanced case study, and focuses on supporting common commercially available tool use and real-world analysis techniques.

Landslide susceptibility mapping using GIS-based statistical models and Remote sensing data in tropical environment.

Science.gov (United States)

Shahabi, Himan; Hashim, Mazlan

2015-04-22

This research presents the results of the GIS-based statistical models for generation of landslide susceptibility mapping using geographic information system (GIS) and remote-sensing data for Cameron Highlands area in Malaysia. Ten factors including slope, aspect, soil, lithology, NDVI, land cover, distance to drainage, precipitation, distance to fault, and distance to road were extracted from SAR data, SPOT 5 and WorldView-1 images. The relationships between the detected landslide locations and these ten related factors were identified by using GIS-based statistical models including analytical hierarchy process (AHP), weighted linear combination (WLC) and spatial multi-criteria evaluation (SMCE) models. The landslide inventory map which has a total of 92 landslide locations was created based on numerous resources such as digital aerial photographs, AIRSAR data, WorldView-1 images, and field surveys. Then, 80% of the landslide inventory was used for training the statistical models and the remaining 20% was used for validation purpose. The validation results using the Relative landslide density index (R-index) and Receiver operating characteristic (ROC) demonstrated that the SMCE model (accuracy is 96%) is better in prediction than AHP (accuracy is 91%) and WLC (accuracy is 89%) models. These landslide susceptibility maps would be useful for hazard mitigation purpose and regional planning.

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

OpenAIRE

Suh, Jangwon; Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

2017-01-01

In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or t...

Utilizing mobile technology in GIS education: A case study of using iPad and iBooks in fieldwork and location based exercises

Science.gov (United States)

Chuang, Yi-Ting

The advancement of mobile computing technology has provided diverse way for education. Combination of mobile devices and GIS tools has become a trend in many geospatial technology applications (i.e., Google Maps application on smartphones). This research aims to develop an iBook prototype (a GIS textbook) for GIS education on Apple iPads and to evaluate the effectiveness of adopting the GIS iBook in classes and fieldwork exercises. We conducted the evaluation tests in two GIS courses (GEOG104 and GEOG381) in Fall 2014 at San Diego State University. There are two main research questions in this study: (1) How to assess and evaluate the effectiveness of location-based learning exercises (from iBook) and fieldwork exercises for first-time GIS students? (2) What were major technical challenges and opportunities to utilize mobile device and mobile technology in GIS education? The procedures of developing and evaluating the prototype of the GIS iBook include creating two new chapters (chapter three: Wander the World through Remote Sensing Data and chapter four: Internet and Mobile GIS), interviewing five educators from high schools and community colleges, and improving the contents of the GIS iBook after the interview. There were 31 students who tested the GIS iBook and did a fieldwork exercise with iPads. The 31 students were required to finish five questionnaires after the exercise to express their user experiences and thoughts about the GIS iBook. Based on the result of questionnaires, most students preferred to take GIS classes with the free GIS iBook and thought fieldwork exercise can help their learning. The students also performed better in knowledge oriented survey after reading the GIS iBook. This research also adopts the SWOT analysis method to evaluate the prototype of the GIS iBook. The result of the SWOT analysis indicates that utilizing mobile device in GIS education does have a great potential value in enhancing student's understanding. The strengths of

Quest for Quality : Interventions to Improve Human Resources for Health among Faith-Based Organizations

NARCIS (Netherlands)

Adjei, S; Maniple, E; I, Dokotala; Mpoza, K; PM, Pamba; Pearl, E; Dieleman, M.A.; Hilhorst, Thea

2009-01-01

ATraditionally, faith-based health organisations have been important health care providers in many remote and other under-serviced areas. Currently, these facilities bear the brunt of the competition for scarce human resources. It is important for faith-based organisations to learn from recent

GIS-based examination of peats and soils in Surfers Paradise, Australia

Directory of Open Access Journals (Sweden)

Al-Ani Haider

2014-03-01

Full Text Available The subsoil conditions of Surfers Paradise in Southeast Queensland of Australia have been examined in terms of soil stiffness by using geographic information system (GIS. Peat is a highly organic and compressible material. Surfers Paradise (as a study area has problematic peat layer due to its high water content, high compressibility, and low shear strength. This layer has various thicknesses at different locations ranging between R.L. . 10 to R.L. -19.6 m. Buildings in Surfers Paradise are using piled foundations to avoid the high compressibility and low shear strength peat layer. Spatial Analyst extension in the GIS ArcMap10 has been utilised to develop zonation maps for different depths in the study area. Each depth has been interpolated as a surface to create Standard Penetration Test SPT-N value GIS-based zonation maps for each depth. In addition, 8 interpolation techniques have been examined to evaluate which technique gives better representation for the Standard Penetration Test (SPT data. Inverse Distance weighing (IDW method in Spatial Analyst extension gives better representation for the utilised data with certain parameters. Two different cross sections have been performed in the core of the study area to determine the extent and the depth of the peat layer underneath already erected buildings. Physical and engineering properties of the Surfers Paradise peat have been obtained and showed that this peat falls within the category of tropical peat.

Predicting long-term average concentrations of traffic-related air pollutants using GIS-based information

Science.gov (United States)

Hochadel, Matthias; Heinrich, Joachim; Gehring, Ulrike; Morgenstern, Verena; Kuhlbusch, Thomas; Link, Elke; Wichmann, H.-Erich; Krämer, Ursula

Global regression models were developed to estimate individual levels of long-term exposure to traffic-related air pollutants. The models are based on data of a one-year measurement programme including geographic data on traffic and population densities. This investigation is part of a cohort study on the impact of traffic-related air pollution on respiratory health, conducted at the westerly end of the Ruhr-area in North-Rhine Westphalia, Germany. Concentrations of NO 2, fine particle mass (PM 2.5) and filter absorbance of PM 2.5 as a marker for soot were measured at 40 sites spread throughout the study region. Fourteen-day samples were taken between March 2002 and March 2003 for each season and site. Annual average concentrations for the sites were determined after adjustment for temporal variation. Information on traffic counts in major roads, building densities and community population figures were collected in a geographical information system (GIS). This information was used to calculate different potential traffic-based predictors: (a) daily traffic flow and maximum traffic intensity of buffers with radii from 50 to 10 000 m and (b) distances to main roads and highways. NO 2 concentration and PM 2.5 absorbance were strongly correlated with the traffic-based variables. Linear regression prediction models, which involved predictors with radii of 50 to 1000 m, were developed for the Wesel region where most of the cohort members lived. They reached a model fit ( R2) of 0.81 and 0.65 for NO 2 and PM 2.5 absorbance, respectively. Regression models for the whole area required larger spatial scales and reached R2=0.90 and 0.82. Comparison of predicted values with NO 2 measurements at independent public monitoring stations showed a satisfactory association ( r=0.66). PM 2.5 concentration, however, was only slightly correlated and thus poorly predictable by traffic-based variables ( rGIS-based regression models offer a promising approach to assess individual levels of

Verification of a GIS-based system for identification of potential hydro power plant sites in Uganda

OpenAIRE

Gimbo, Florence

2015-01-01

Hydropower makes and is expected to continue to make a significant contribution to meeting the electricity demand in many countries. The information on hydropower potential is many places is often incomplete. A GIS based tool is under development is expected to help in quickly identifying possible hydropower plant locations over a large area in a short time. This study is aimed at evaluating how well this GIS tool is able to estimate the hydropower potential from the runoff maps and terrain/e...

[Application of electronic fence technology based on GIS in Oncomelania hupensis snail monitoring].

Science.gov (United States)

Zhi-Hua, Chen; Yi-Sheng, Zhu; Zhi-Qiang, Xue; Xue-Bing, Li; Yi-Min, Ding; Li-Jun, Bi; Kai-Min, Gao; You, Zhang

2017-07-27

To study the application of Geographic Information System (GIS) electronic fence technique in Oncomelania hupensis snail monitoring. The electronic fence was set around the history and existing snail environments in the electronic map, the information about snail monitoring and controlling was linked to the electronic fence, and the snail monitoring information system was established on these bases. The monitoring information was input through the computer and smart phone. The electronic fence around the history and existing snail environments was set in the electronic map (Baidu map), and the snail monitoring information system and smart phone APP were established. The monitoring information was input and upload real-time, and the snail monitoring information was demonstrated in real time on Baidu map. By using the electronic fence technology based on GIS, the unique "environment electronic archives" for each snail monitoring environment can be established in the electronic map, and real-time, dynamic monitoring and visual management can be realized.

Explorations of the implementation of a parallel IDW interpolation algorithm in a Linux cluster-based parallel GIS

Science.gov (United States)

Huang, Fang; Liu, Dingsheng; Tan, Xicheng; Wang, Jian; Chen, Yunping; He, Binbin

2011-04-01

To design and implement an open-source parallel GIS (OP-GIS) based on a Linux cluster, the parallel inverse distance weighting (IDW) interpolation algorithm has been chosen as an example to explore the working model and the principle of algorithm parallel pattern (APP), one of the parallelization patterns for OP-GIS. Based on an analysis of the serial IDW interpolation algorithm of GRASS GIS, this paper has proposed and designed a specific parallel IDW interpolation algorithm, incorporating both single process, multiple data (SPMD) and master/slave (M/S) programming modes. The main steps of the parallel IDW interpolation algorithm are: (1) the master node packages the related information, and then broadcasts it to the slave nodes; (2) each node calculates its assigned data extent along one row using the serial algorithm; (3) the master node gathers the data from all nodes; and (4) iterations continue until all rows have been processed, after which the results are outputted. According to the experiments performed in the course of this work, the parallel IDW interpolation algorithm can attain an efficiency greater than 0.93 compared with similar algorithms, which indicates that the parallel algorithm can greatly reduce processing time and maximize speed and performance.

Public health nursing, ethics and human rights.

Science.gov (United States)

Ivanov, Luba L; Oden, Tami L

2013-05-01

Public health nursing has a code of ethics that guides practice. This includes the American Nurses Association Code of Ethics for Nurses, Principles of the Ethical Practice of Public Health, and the Scope and Standards of Public Health Nursing. Human rights and Rights-based care in public health nursing practice are relatively new. They reflect human rights principles as outlined in the Universal Declaration of Human Rights and applied to public health practice. As our health care system is restructured and there are new advances in technology and genetics, a focus on providing care that is ethical and respects human rights is needed. Public health nurses can be in the forefront of providing care that reflects an ethical base and a rights-based approach to practice with populations. © 2013 Wiley Periodicals, Inc.

A Human Rights-Based Approach to Farmworker Health: An Overarching Framework to Address the Social Determinants of Health.

Science.gov (United States)

Ramos, Athena K

2018-01-01

Migrant and seasonal workers have a right to the highest attainable standard of health. Unfortunately, these farmworkers face a multitude of challenges. They are employed in one of the most dangerous industries and face serious occupational health risks, while positioned at the bottom of the social hierarchy. They often lack formal education and training, English language proficiency, legal status, access to information, and equitable opportunities to health and healthcare. This article will explore the international human rights conventions that support farmworkers' right to health and healthcare in the United States. International human rights may provide a valuable legal framework that could be used to advocate on behalf of farmworkers and address the social determinants of health. Therefore, a Human Rights-Based Approach to Farmworker health will be presented along with recommendations for how to advance health and access to healthcare among this population. Fostering the health and well-being of migrant and seasonal farmworkers is critical to advancing equity, social justice, and maintaining the workforce required to meet production needs and safeguard the economic competitiveness of the industry.

Geospatial Health: the first five years

Directory of Open Access Journals (Sweden)

Jürg Utzinger

2011-11-01

Full Text Available Geospatial Health is an international, peer-reviewed scientific journal produced by the Global Network for Geospatial Health (GnosisGIS. This network was founded in 2000 and the inaugural issue of its official journal was published in November 2006 with the aim to cover all aspects of geographical information system (GIS applications, remote sensing and other spatial analytic tools focusing on human and veterinary health. The University of Naples Federico II is the publisher, producing two issues per year, both as hard copy and an open-access online version. The journal is referenced in major databases, including CABI, ISI Web of Knowledge and PubMed. In 2008, it was assigned its first impact factor (1.47, which has now reached 1.71. Geospatial Health is managed by an editor-in-chief and two associate editors, supported by five regional editors and a 23-member strong editorial board. This overview takes stock of the first five years of publishing: 133 contributions have been published so far, primarily original research (79.7%, followed by reviews (7.5%, announcements (6.0%, editorials and meeting reports (3.0% each and a preface in the first issue. A content analysis of all the original research articles and reviews reveals that three quarters of the publications focus on human health with the remainder dealing with veterinary health. Two thirds of the papers come from Africa, Asia and Europe with similar numbers of contributions from each continent. Studies of more than 35 different diseases, injuries and risk factors have been presented. Malaria and schistosomiasis were identified as the two most important diseases (11.2% each. Almost half the contributions were based on GIS, one third on spatial analysis, often using advanced Bayesian geostatistics (13.8%, and one quarter on remote sensing. The 120 original research articles, reviews and editorials were produced by 505 authors based at institutions and universities in 52 countries

What Constitutes Evidence in Human Rights-Based Approaches to Health? Learning from Lived Experiences of Maternal and Sexual Reproductive Health.

Science.gov (United States)

Unnithan, Maya

2015-12-10

The impact of human rights interventions on health outcomes is complex, multiple, and difficult to ascertain in the conventional sense of cause and effect. Existing approaches based on probable (experimental and statistical) conclusions from evidence are limited in their ability to capture the impact of rights-based transformations in health. This paper argues that a focus on plausible conclusions from evidence enables policy makers and researchers to take into account the effects of a co-occurrence of multiple factors connected with human rights, including the significant role of "context" and power. Drawing on a subject-near and interpretive (in other words, with regard to meaning) perspective that focuses on the lived experiences of human rights-based interventions, the paper suggests that policy makers and researchers are best served by evidence arrived at through plausible, observational modes of ascertaining impact. Through an examination of what human rights-based interventions mean, based on the experience of their operationalization on the ground in culturally specific maternal and reproductive health care contexts, this paper contributes to an emerging scholarship that seeks to pluralize the concept of evidence and to address the methodological challenges posed by heterogeneous forms of evidence in the context of human rights as applied to health. Copyright © 2015 Unnithan. This is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0/), which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original author and source are credited.

Pedagogical Potential of a Web-Based GIS Application for Migration Data: A Preliminary Investigation in the Context of South Korea

Science.gov (United States)

Kim, Minsung; Kim, Kamyoung; Lee, Sang-Il

2013-01-01

This article examines the pedagogical potential of a Web-based GIS application, Population Migration Web Service (PMWS), in which students can examine population geography in an interactive and exploratory manner. This article introduces PMWS, a tailored, unique Internet GIS application that provides functions for visualizing spatial interaction…

Effect of Climatic Factors and Population Density on the Distribution of Dengue in Sri Lanka: A GIS Based Evaluation for Prediction of Outbreaks.

Directory of Open Access Journals (Sweden)

Pdnn Sirisena

Full Text Available Dengue is one of the major hurdles to the public health in Sri Lanka, causing high morbidity and mortality. The present study focuses on the use of geographical information systems (GIS to map and evaluate the spatial and temporal distribution of dengue in Sri Lanka from 2009 to 2014 and to elucidate the association of climatic factors with dengue incidence. Epidemiological, population and meteorological data were collected from the Epidemiology Unit, Department of Census and Statistics and the Department of Meteorology of Sri Lanka. Data were analyzed using SPSS (Version 20, 2011 and R studio (2012 and the maps were generated using Arc GIS 10.2. The dengue incidence showed a significant positive correlation with rainfall (p<0.0001. No positive correlation was observed between dengue incidence and temperature (p = 0.107 or humidity (p = 0.084. Rainfall prior to 2 and 5 months and a rise in the temperature prior to 9 months positively correlated with dengue incidence as based on the auto-correlation values. A rise in humidity prior to 1 month had a mild positive correlation with dengue incidence. However, a rise in humidity prior to 9 months had a significant negative correlation with dengue incidence based on the auto-correlation values. Remote sensing and GIS technologies give near real time utility of climatic data together with the past dengue incidence for the prediction of dengue outbreaks. In that regard, GIS will be applicable in outbreak predictions including prompt identification of locations with dengue incidence and forecasting future risks and thus direct control measures to minimize major outbreaks.

Research on evaluation of degree of complexity of mining fault network based on GIS

Energy Technology Data Exchange (ETDEWEB)

Hua Zhang; Yun-jia Wang; Chuan-zhi Liu [China University of Mining and Technology, Jiangsu (China). School of Environment Science and Spatial Informatics

2007-03-15

A large number of spatial and attribute data are involved in coal resource evaluation. Databases are a relatively advanced data management technology, but their major defects are the poor graphic and spatial data functions, from which it is difficult to realize scientific management of evaluation data with spatial characteristics and evaluation result maps. On account of these deficiencies, the evaluation of degree of complexity of mining fault network based on a geographic information system (GIS) is proposed which integrates management of spatial and attribute data. A fractal is an index which can reflect the comprehensive information of faults' number, density, size, composition and dynamics mechanism. A fractal dimension is used as the quantitative evaluation index. Evaluation software has been developed based on a component GIS-MapX, with which the degree of complexity of fault network is evaluated quantitatively using the quantitative index of fractal dimensions in Liuqiao No.2 coal mine as an example. Results show that it is effective in acquiring model parameters and enhancing the definition of data and evaluation results with the application of GIS technology. The fault network is a system with fractal structure and its complexity can be described reasonably and accurately by fractal dimension, which provides an effective method for coal resource evaluation. 9 refs., 6 figs., 2 tabs.

Gis-based procedures for hydropower potential spotting

Energy Technology Data Exchange (ETDEWEB)

Larentis, Dante G.; Collischonn, Walter; Tucci, Carlos E.M. [Instituto de Pesquisas Hidraulicas da UFRGS, Av. Bento Goncalves, 9500, CEP 91501-970, Caixa Postal 15029, Porto Alegre, RS (Brazil); Olivera, Francisco (Texas A and M University, Zachry Department of Civil Engineering 3136 TAMU, College Station, TX 77843-3136, US)

2010-10-15

The increasing demand for energy, especially from renewable and sustainable sources, spurs the development of small hydropower plants and encourages investment in new survey studies. Preliminary hydropower survey studies usually carry huge uncertainties about the technical, economic and environmental feasibility of the undeveloped potential. This paper presents a methodology for large-scale survey of hydropower potential sites to be applied in the inception phase of hydroelectric development planning. The sequence of procedures to identify hydropower sites is based on remote sensing and regional streamflow data and was automated within a GIS-based computational program: Hydrospot. The program allows spotting more potential sites along the drainage network than it would be possible in a traditional survey study, providing different types of dam-powerhouse layouts and two types (operating modes) of projects: run-of-the-river and storage projects. Preliminary results from its applications in a hydropower-developed basin in Brazil have shown Hydrospot's limitations and potentialities in giving support to the mid-to-long-term planning of the electricity sector. (author)

Landslide Catastrophes and Disaster Risk Reduction: A GIS Framework for Landslide Prevention and Management

Directory of Open Access Journals (Sweden)

Xin Wang

2010-09-01

Full Text Available As catastrophic phenomena, landslides often cause large-scale socio-economic destruction including loss of life, economic collapse, and human injury. In addition, landslides can impair the functioning of critical infrastructure and destroy cultural heritage and ecological systems. In order to build a more landslide resistant and resilient society, an original GIS-based decision support system is put forth in order to help emergency managers better prepare for and respond to landslide disasters. The GIS-based landslide monitoring and management system includes a Central Repository System (CRS, Disaster Data Processing Modules (DDPM, a Command and Control System (CCS and a Portal Management System (PMS. This architecture provides valuable insights into landslide early warning, landslide risk and vulnerability analyses, and critical infrastructure damage assessments. Finally, internet-based communications are used to support landslide disaster modelling, monitoring and management.

TOXMAP®: Environmental Health Maps

Data.gov (United States)

U.S. Department of Health & Human Services — TOXMAP® is a Geographic Information System (GIS) that uses maps of the United States and Canada to help users visually explore data primarily from the EPA's Toxics...

Assessment of bioenergy potential in Sicily: A GIS-based support methodology

International Nuclear Information System (INIS)

Beccali, Marco; D'Alberti, Vincenzo; Franzitta, Vincenzo; Columba, Pietro

2009-01-01

A Geographical Information System (GIS) supported methodology has been developed in order to assess the technical and economic potential of biomass exploitation for energy production in Sicily. The methodology was based on the use of agricultural, economic, climatic, and infrastructural data in a GIS. Data about land use, transportation facilities, urban cartography, regional territorial planning, terrain digital model, lithology, climatic types, and civil and industrial users have been stored in the GIS to define potential areas for gathering the residues coming from the pruning of olive groves, vineyards, and other agricultural crops, and to assess biomass available for energy cultivation. Further, it was possible to assess the potential of biodiesel production, supposing the cultivation of rapeseed in arable crop areas. For the biomass used for direct combustion purposes, the economic availability has been assessed assuming a price of the biomass and comparing it with other fuels. This assessment has shown the strong competitiveness of firewood in comparison with traditional fossil fuels when the collection system is implemented in an efficient way. Moreover, the economic potential of biodiesel was assessed considering the on-going financial regime for fuel. At the same time, the study has shown a significant competitiveness of the finished biomass (pellets), and good potential for a long-term development of this market. An important result was the determination of biofuel production potential in Sicily. An outcome of the study was to show the opportunities stemming from the harmonisation of Energy Policy with the Waste Management System and Rural Development Plan. (author)

GIS in Public Health: applications in the Legionnaires' disease prevention programme

Directory of Open Access Journals (Sweden)

Emiliano Aránguez Ruiz

2006-12-01

Full Text Available This experience has been developed by the Public Health Institute of the Community of Madrid in order to use the GIS tools in the Legionnaires’ disease prevention programme and specifically in three work areas: epidemiologic surveillance, cooling towers environmental control and plans of intervention in case of an outbreak of Legionnaires’ disease.After having considered different strategies with their advantages the selected model have been the use of map viewers in the intranet with a different configuration format depending on its goals: images map viewers for systematic non-outbreak cases and cooling towers surveillance, viewers that allow an easier and usual consultation and, in the other hand, layers map viewers, better adapted to more complex users’ necessities and so designed to work in emergency situations. Both models are implemented to decentralise the use of these indispensable tools and make them closer of the public health professionals.Some methodological proposals to study spatial association of Legionaires’disease outbreaks are also presented and discussed in this paper.

Freeware for GIS and Remote Sensing

OpenAIRE

Lena Halounová

2007-01-01

Education in remote sensing and GIS is based on software utilization. The software needs to be installed in computer rooms with a certain number of licenses. The commercial software equipment is therefore financially demanding and not only for universities, but especially for students. Internet research brings a long list of free software of various capabilities. The paper shows a present state of GIS, image processing and remote sensing free software.

Technology Use in Rwandan Secondary Schools: An Assessment of Teachers' Attitudes towards Geographic Information Systems (GIS)

Science.gov (United States)

Akinyemi, Felicia O.

2016-01-01

Technology use is evident in all spheres of human endeavour. Focusing on technology use in education, this paper examines teachers' attitudes towards geographic information system (GIS). An assessment was made of GIS teachers in Rwandan secondary schools. Key areas covered include how GIS is implemented in schools, teachers' attitudes and…

A GIS-based generic real-time risk assessment framework and decision tools for chemical spills in the river basin.

Science.gov (United States)

Jiang, Jiping; Wang, Peng; Lung, Wu-seng; Guo, Liang; Li, Mei

2012-08-15

This paper presents a generic framework and decision tools of real-time risk assessment on Emergency Environmental Decision Support System for response to chemical spills in river basin. The generic "4-step-3-model" framework is able to delineate the warning area and the impact on vulnerable receptors considering four types of hazards referring to functional area, societal impact, and human health and ecology system. Decision tools including the stand-alone system and software components were implemented on GIS platform. A detailed case study on the Songhua River nitrobenzene spill illustrated the goodness of the framework and tool Spill first responders and decision makers of catchment management will benefit from the rich, visual and dynamic hazard information output from the software. Copyright © 2012 Elsevier B.V. All rights reserved.

An Investigation into the Possibilities of BIM and GIS Cooperation and Utilization of GIS in the BIM Process

Directory of Open Access Journals (Sweden)

Pavel Tobiáš

2015-06-01

Full Text Available In the coming years we will most probably watch a significant increase of the BIM (building information model utilization in the AEC (Architecture/Engineering/Construction sector even in the Czech Republic. Therefore, it would be reasonable to consider possible utilization of the well-established geographic information systems within the building information modelling process. This paper is based on the currently existing literature and is focused on the interrelationship between BIM and GIS. The main goal is to reveal potential fields of cooperation and to find possible utilization of GIS in BIM. To provide a theoretical framework, this article briefly introduces and defines the term of BIM and deals with the most important semantic models in AEC and 3D GIS IFC and CityGML. The paper also contains examples of specific efforts recently dealing with the BIM and GIS collaboration.

Design of AN Intelligent Individual Evacuation Model for High Rise Building Fires Based on Neural Network Within the Scope of 3d GIS

Science.gov (United States)

Atila, U.; Karas, I. R.; Turan, M. K.; Rahman, A. A.

2013-09-01

One of the most dangerous disaster threatening the high rise and complex buildings of today's world including thousands of occupants inside is fire with no doubt. When we consider high population and the complexity of such buildings it is clear to see that performing a rapid and safe evacuation seems hard and human being does not have good memories in case of such disasters like world trade center 9/11. Therefore, it is very important to design knowledge based realtime interactive evacuation methods instead of classical strategies which lack of flexibility. This paper presents a 3D-GIS implementation which simulates the behaviour of an intelligent indoor pedestrian navigation model proposed for a self -evacuation of a person in case of fire. The model is based on Multilayer Perceptron (MLP) which is one of the most preferred artificial neural network architecture in classification and prediction problems. A sample fire scenario following through predefined instructions has been performed on 3D model of the Corporation Complex in Putrajaya (Malaysia) and the intelligent evacuation process has been realized within a proposed 3D-GIS based simulation.

BUILDING A COMPLETE FREE AND OPEN SOURCE GIS INFRASTRUCTURE FOR HYDROLOGICAL COMPUTING AND DATA PUBLICATION USING GIS.LAB AND GISQUICK PLATFORMS

Directory of Open Access Journals (Sweden)

M. Landa

2017-07-01

Full Text Available Building a complete free and open source GIS computing and data publication platform can be a relatively easy task. This paper describes an automated deployment of such platform using two open source software projects – GIS.lab and Gisquick. GIS.lab (http: //web.gislab.io is a project for rapid deployment of a complete, centrally managed and horizontally scalable GIS infrastructure in the local area network, data center or cloud. It provides a comprehensive set of free geospatial software seamlessly integrated into one, easy-to-use system. A platform for GIS computing (in our case demonstrated on hydrological data processing requires core components as a geoprocessing server, map server, and a computation engine as eg. GRASS GIS, SAGA, or other similar GIS software. All these components can be rapidly, and automatically deployed by GIS.lab platform. In our demonstrated solution PyWPS is used for serving WPS processes built on the top of GRASS GIS computation platform. GIS.lab can be easily extended by other components running in Docker containers. This approach is shown on Gisquick seamless integration. Gisquick (http://gisquick.org is an open source platform for publishing geospatial data in the sense of rapid sharing of QGIS projects on the web. The platform consists of QGIS plugin, Django-based server application, QGIS server, and web/mobile clients. In this paper is shown how to easily deploy complete open source GIS infrastructure allowing all required operations as data preparation on desktop, data sharing, and geospatial computation as the service. It also includes data publication in the sense of OGC Web Services and importantly also as interactive web mapping applications.

Legal requirements for human-health based appeals of wind energy projects in ontario.

Science.gov (United States)

Engel, Albert M

2014-01-01

In 2009, the government of the province of Ontario, Canada passed new legislation to promote the development of renewable energy facilities, including wind energy facilities in the province. Throughout the legislative process, concerns were raised with respect to the effect of wind energy facilities on human health. Ultimately, the government established setbacks and sound level limits for wind energy facilities and provided Ontario residents with the right to appeal the approval of a wind energy facility on the ground that engaging in the facility in accordance with its approval will cause serious harm to human health. The first approval of a wind facility under the new legislation was issued in 2010 and since then, Ontario's Environmental Review Tribunal as well as Ontario's courts has been considering evidence proffered by appellants seeking revocation of approvals on the basis of serious harm to human health. To date, the evidence has been insufficient to support the revocation of a wind facility approval. This article reviews the legal basis for the dismissal of human-health based appeals.

Assessment of training needs and preferences for geographic information systems (GIS) mapping in state comprehensive cancer-control programs.

Science.gov (United States)

Hopfer, Suellen; Chadwick, Amy E; Parrott, Roxanne L; Ghetian, Christie B; Lengerich, Eugene J

2009-10-01

Geographic information systems (GIS) mapping technologies have potential to advance public health promotion by mapping regional differences in attributes (e.g., disease burden, environmental exposures, access to health care services) to suggest priorities for public health interventions. Training in GIS for comprehensive cancer control (CCC) has been overlooked. State CCC programs' GIS training needs were assessed by interviewing 49 state CCC directors. A majority perceived a need for GIS training, slightly more than half of state CCC programs had access to geocoded data, and the majority of programs did not require continuing education credits of their staff. CCC directors perceived judging maps and realizing their limitations as important skills and identified epidemiologists, CCC staff, public health officials, policy makers, and cancer coalition members as training audiences. They preferred in-class training sessions that last a few hours to a day. Lessons learned are shared to develop training programs with translatable GIS skills for CCC.

A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping.

Science.gov (United States)

Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

2014-12-01

Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having "very high susceptibility", with the further 31% falling into zones classified as having "high susceptibility".

Ecocity mapping using GIS: introducing a planning method for assessing and improving neighborhood vitality.

Science.gov (United States)

Smith, Richard; Miller, Kirstin

2013-01-01

Assessing neighborhood vitality is important to understanding how to improve quality of life and health outcomes. The ecocity model recognizes that cities are part of natural systems and favors walkable neighborhoods. This article introduces ecocity mapping, an innovative planning method, to the public health literature on community engagement by describing a pilot project with a new affordable housing development in Oakland, California between 2007 and 2009. Although ecocity mapping began as a paper technology, advances in geographic information systems (GIS) moved it forward. This article describes how Ecocity Builders used GIS to conduct ecocity mapping to (1) assess vitality of neighborhoods and urban centers to prioritize community health intervention pilot sites and (2) create scenario maps for use in community health planning. From fall 2007 to summer 2008, Ecocity Builders assessed neighborhood vitality using walking distance from parks, schools, rapid transit stops, grocery stores, and retail outlets. In 2008, ecocity maps were shared with residents to create a neighborhood health and sustainability plan. In 2009, Ecocity Builders developed scenario maps to show how changes to the built environment would improve air quality by reducing greenhouse gas emissions from vehicles, while increasing access to basic services and natural amenities. Community organizing with GIS was more useful than GIS alone for final site selection. GIS was useful in mapping scenarios after residents shared local neighborhood knowledge and ideas for change. Residents were interested in long-term environmental planning, provided they could meet immediate needs.

GIS-based analysis and modelling with empirical and remotely-sensed data on coastline advance and retreat

Science.gov (United States)

Ahmad, Sajid Rashid

-term memory processes were indicative of transitory hydrodynamic and other processes. An innovative framework for a spatio-temporal information-based system (STIBS) was developed. STIBS incorporated diverse datasets within a GIS, dynamic computer-based simulation models, and a spatial information query and graphical subsystem. Tests of the STIBS proved that it could be used to simulate and visualize temporal variability in shifting morphological states of the coastline.

The evolution of human rights in World Health Organization policy and the future of human rights through global health governance.

Science.gov (United States)

Meier, B M; Onzivu, W

2014-02-01

The World Health Organization (WHO) was intended to serve at the forefront of efforts to realize human rights to advance global health, and yet this promise of a rights-based approach to health has long been threatened by political constraints in international relations, organizational resistance to legal discourses, and medical ambivalence toward human rights. Through legal research on international treaty obligations, historical research in the WHO organizational archives, and interview research with global health stakeholders, this research examines WHO's contributions to (and, in many cases, negligence of) the rights-based approach to health. Based upon such research, this article analyzes the evolving role of WHO in the development and implementation of human rights for global health, reviews the current state of human rights leadership in the WHO Secretariat, and looks to future institutions to reclaim the mantle of human rights as a normative framework for global health governance. Copyright © 2013 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

[Research on suitable distribution of Paris yunnanensis based on remote sensing and GIS].

Science.gov (United States)

Luo, Yao; Dong, Yong-Bo; Zhu, Cong; Peng, Wen-Fu; Fang, Qing-Mao; Xu, Xin-Liang

2017-11-01

Paris yunnanensis is a kind of rare medicinal herb, having a very high medicinal value. Studying its suitable ecological condition can provide a basis for its rational exploitation, artificial cultivation, and sustainable utilization. A practicable method in this paper has been proposed to research the suitable regional distribution of P. yunnanensis in Sichuan province. By the case study of P. yunnanensis in Sichuan province, and according to related literatures, the suitable ecological condition of P. yunnanensis such as altitude, mean annual temperature (MAT), annual precipitation, regional slope, slope ranges, vegetative cover, and soil types was analyzed following remote sensing (RS) and GIS.The appropriate distribution regionof P. yunnanensis and its area were extracted based on RS and GIS technology,combing with the information of the field validation data. The results showed that the concentrated distribution regions in counties of Sichuan province were, Liangshan prefecture, Aba prefecture, Sertar county of Ganzi prefecture, Panzhihua city, Ya'an city, Chengdu city, Meishan city, Leshan city, Yibin city, Neijiang city, Luzhou city, Bazhong city, Nanchong city, Guangyuan city and other cities and counties area.The suitable distribution area in Sichuan is about 7 338 km², accounting for 3.02% of the total study regional area. The analysis result has high consistency with the filed validation data, and the research method for P. yunnanensis distribution region based onspatial overlay analysis and the extracted the information of land usage and ecological factors following the RS and GIS is reliable. Copyright© by the Chinese Pharmaceutical Association.

Freeware for GIS and Remote Sensing

Directory of Open Access Journals (Sweden)

Lena Halounová

2007-12-01

Full Text Available Education in remote sensing and GIS is based on software utilization. The software needs to be installed in computer rooms with a certain number of licenses. The commercial software equipment is therefore financially demanding and not only for universities, but especially for students. Internet research brings a long list of free software of various capabilities. The paper shows a present state of GIS, image processing and remote sensing free software.

Wireless mobile field-based GIS science and technology for crisis management process: A case study of a fire event, Cairo, Egypt

Directory of Open Access Journals (Sweden)

I.H. EL-Gamily

2010-06-01

Full Text Available Wireless GIS services have been evolving from scientific and technological perspectives through the last two decades. These services include both the location-based services (LBS and the mobile field-based GIS. Whereas the former provides the user with the capability to access and query the already established enterprise geo-database, the latter enables the end user not only to access and query but also to update the geo-database by a near real-time spatial and non-spatial data. However, to establish a mobile field-based GIS facility, a concise system architecture should be designed. This architecture includes client-side components, wireless communication facility, and server components. The integration and automation of these components can provide the capability to collect, update, validate, and query the enterprise geo-database remotely in a near real-time mode. One of the potential fields of applications for the mobile field-based GIS is the crisis management process. A prescribed system has been previously defined as emergency response cycle for managing both the natural and the man-made crises. Three phases of the emergency response cycle are outlined which are the response and rescue phase, the recovery and reconstruction phase, and mitigation and preparedness phase. In each phase, various tasks are undertaken based on the type of the event. Selective tasks of the response and the rescue phase of the fire event occurred in the Sheraton Exchange Center have been chosen to check the validity of using the mobile field-based GIS for enhancing the performance of these tasks. These tasks are path selection and quick damage estimates.

Web GIS in practice VI: a demo playlist of geo-mashups for public health neogeographers.

Science.gov (United States)

Boulos, Maged N Kamel; Scotch, Matthew; Cheung, Kei-Hoi; Burden, David

2008-07-18

'Mashup' was originally used to describe the mixing together of musical tracks to create a new piece of music. The term now refers to Web sites or services that weave data from different sources into a new data source or service. Using a musical metaphor that builds on the origin of the word 'mashup', this paper presents a demonstration "playlist" of four geo-mashup vignettes that make use of a range of Web 2.0, Semantic Web, and 3-D Internet methods, with outputs/end-user interfaces spanning the flat Web (two-dimensional - 2-D maps), a three-dimensional - 3-D mirror world (Google Earth) and a 3-D virtual world (Second Life). The four geo-mashup "songs" in this "playlist" are: 'Web 2.0 and GIS (Geographic Information Systems) for infectious disease surveillance', 'Web 2.0 and GIS for molecular epidemiology', 'Semantic Web for GIS mashup', and 'From Yahoo! Pipes to 3-D, avatar-inhabited geo-mashups'. It is hoped that this showcase of examples and ideas, and the pointers we are providing to the many online tools that are freely available today for creating, sharing and reusing geo-mashups with minimal or no coding, will ultimately spark the imagination of many public health practitioners and stimulate them to start exploring the use of these methods and tools in their day-to-day practice. The paper also discusses how today's Web is rapidly evolving into a much more intensely immersive, mixed-reality and ubiquitous socio-experiential Metaverse that is heavily interconnected through various kinds of user-created mashups.

Study on Method of Geohazard Change Detection Based on Integrating Remote Sensing and GIS

International Nuclear Information System (INIS)

Zhao, Zhenzhen; Yan, Qin; Liu, Zhengjun; Luo, Chengfeng

2014-01-01

Following a comprehensive literature review, this paper looks at analysis of geohazard using remote sensing information. This paper compares the basic types and methods of change detection, explores the basic principle of common methods and makes an respective analysis of the characteristics and shortcomings of the commonly used methods in the application of geohazard. Using the earthquake in JieGu as a case study, this paper proposes a geohazard change detection method integrating RS and GIS. When detecting the pre-earthquake and post-earthquake remote sensing images at different phases, it is crucial to set an appropriate threshold. The method adopts a self-adapting determination algorithm for threshold. We select a training region which is obtained after pixel information comparison and set a threshold value. The threshold value separates the changed pixel maximum. Then we apply the threshold value to the entire image, which could also make change detection accuracy maximum. Finally, we output the result to the GIS system to make change analysis. The experimental results show that this method of geohazard change detection based on integrating remote sensing and GIS information has higher accuracy with obvious advantages compared with the traditional methods

Geospatial health

DEFF Research Database (Denmark)

Utzinger, Jürg; Rinaldi, Laura; Malone, John B.

2011-01-01

Geospatial Health is an international, peer-reviewed scientific journal produced by the Global Network for Geospatial Health (GnosisGIS). This network was founded in 2000 and the inaugural issue of its official journal was published in November 2006 with the aim to cover all aspects of geographical...... information system (GIS) applications, remote sensing and other spatial analytic tools focusing on human and veterinary health. The University of Naples Federico II is the publisher, producing two issues per year, both as hard copy and an open-access online version. The journal is referenced in major...... databases, including CABI, ISI Web of Knowledge and PubMed. In 2008, it was assigned its first impact factor (1.47), which has now reached 1.71. Geospatial Health is managed by an editor-in-chief and two associate editors, supported by five regional editors and a 23-member strong editorial board...

Application of gis - technology for modelling motion water in the open channels

OpenAIRE

Venherskyi, Petro; Kokovska, Yaryna

2012-01-01

In this paper technology that would be allowed to use ArcGIS-Extension, that is GIS-components for Webapplications based on ArcGIS Server'a. Such technologies provide simple and easy integration and use of GIS-component on the WEB-site, where a separate layer provided opportunities modeling and solving applied problems of moving water flow in rivers.

A GIS tool for the economic assessment of renewable technologies

International Nuclear Information System (INIS)

Mahmmud, F.; Woods, J.; Watson, S.; Halliday, J.; Hossain, J.

1997-01-01

A Geographical Information System (GIS) has the potential to analyse a large area for the optimum selection and siting of renewable energy systems. This paper reports on a GIS based scheme for the economic assessment of a selected number of wind and photovoltaic systems in the state of Karnataka, in India. This involved the implementation of an appropriate GIS methodology. The preparation of the GIS database is often the most arduous task in GIS operations. Thus, a description of the GIS methodology and the preparation of the database for the analysis of a selection of wind and photovoltaic systems is given. This approach has enabled the identification of the high potential areas in terms of the levelised electricity costs. An overall assessment of the region for present and future scenarios is also given. (author)

Risk analysis for dengue suitability in Africa using the ArcGIS predictive analysis tools (PA tools).

Science.gov (United States)

Attaway, David F; Jacobsen, Kathryn H; Falconer, Allan; Manca, Germana; Waters, Nigel M

2016-06-01

Risk maps identifying suitable locations for infection transmission are important for public health planning. Data on dengue infection rates are not readily available in most places where the disease is known to occur. A newly available add-in to Esri's ArcGIS software package, the ArcGIS Predictive Analysis Toolset (PA Tools), was used to identify locations within Africa with environmental characteristics likely to be suitable for transmission of dengue virus. A more accurate, robust, and localized (1 km × 1 km) dengue risk map for Africa was created based on bioclimatic layers, elevation data, high-resolution population data, and other environmental factors that a search of the peer-reviewed literature showed to be associated with dengue risk. Variables related to temperature, precipitation, elevation, and population density were identified as good predictors of dengue suitability. Areas of high dengue suitability occur primarily within West Africa and parts of Central Africa and East Africa, but even in these regions the suitability is not homogenous. This risk mapping technique for an infection transmitted by Aedes mosquitoes draws on entomological, epidemiological, and geographic data. The method could be applied to other infectious diseases (such as Zika) in order to provide new insights for public health officials and others making decisions about where to increase disease surveillance activities and implement infection prevention and control efforts. The ability to map threats to human and animal health is important for tracking vectorborne and other emerging infectious diseases and modeling the likely impacts of climate change. Copyright © 2016 Elsevier B.V. All rights reserved.

A GIS framework for the assessment of tick impact on human health in a changing climate.

Science.gov (United States)

Estrada-Peña, Agustin; Venzal, José M

2007-05-01

A framework to evaluate the impact of ticks on human health under various scenarios of climate change is proposed. The purpose is not to provide a comprehensive plan (e.g. the economic impact of ticks on human society is not included), instead we wish to describe a series of indices that would be helpful by obtaining homogeneous comparisons of impact and vulnerability exerted by ticks in different regions, countries or continents, using normalized sets of population, vegetation, climate and physical attributes of the territory. Three tick species, i.e. Dermacentor marginatus, Rhipicephalus turanicus and Hyalomma marginatum, have been traced over the territory of Spain to further explain the computation of these indices. The discussion is based on tick habitat suitability, used as a measure of the abiotic (climate) fitness of the habitat for the species in question, and the sensitivity of each tick species to the rate of change of habitat suitability with respect to climate change. The impact is the rate of change in habitat suitability weighted with a fuzzy logic function evaluating the total number of people in an area, percent of rural population and accessibility of the geographical divisions (expressed as hexagons with a 10 km radius) used in the study. The different climate scenarios evaluated in relation to ticks show that the north-western part of Spain would suffer the greatest impact in case the mean temperature would increase, while the Mediterranean region would suffer the highest impact if temperatures decreased. Vulnerability, based on the sanitary structure of the territory and on the impact on human activities due to the change in tick distribution and abundance, is proposed as a measure of adaptation of society to these climate scenarios. The cost is evaluated as a function of land use and tick habitat suitability in a buffer zone surrounding each geographic division. All indices proposed have been obtained by search of common and/or publicly

Application of GIS from the multifunctionality aspect

Directory of Open Access Journals (Sweden)

Mirko A. Borisov

2011-04-01

Full Text Available Application of computer technology in the Earth science has led to the creation and development of new scientific disciplines, particularly digital cartography and GIS. This paper describes the application of GIS from several points of view such as: multi-scale, multi-thematic, multi-viewing, accommodation to standard software platforms and multi-user data accesses. Introduction The premise of a successful usage of topographic data nowadays implies their disposal in a digital form and organisation in a modern way, suitable for further computer processing. It is a unanimous opinion that it can be successfully completed only through creating data basis of space developing GIS. The theme of the written work is the development and application of GIS, and management of topographic data in accordance with international standards and users' needs. Moving to digital technology of creating and using topographic data should not be literal translation of the analogue map into a digital picture or just the automation of the map making using digital technology. The new method implies the formation of the central topographic data base which would generate displays of arbitrary scales, desired volumes of content, changeable sheet dimensions, various thematic displays, altogether in accordance with users' demands and needs. Digital cartography and GIS The development and application of computers in the area of earth sciences caused the creation of new definitions and disciplines among which are noticeable computer supported cartography and GIS. The computer-supported cartography was in its later phase called digital cartography and it can be used in two ways: like modern technology of date processing about space and like a new discipline. The main principle on which digital cartography as a discipline is based represents the processing and visualization of data about space but with computer supported technology. Application of GIS from various aspects

Using a Web GIS Plate Tectonics Simulation to Promote Geospatial Thinking

Science.gov (United States)

Bodzin, Alec M.; Anastasio, David; Sharif, Rajhida; Rutzmoser, Scott

2016-01-01

Learning with Web-based geographic information system (Web GIS) can promote geospatial thinking and analysis of georeferenced data. Web GIS can enable learners to analyze rich data sets to understand spatial relationships that are managed in georeferenced data visualizations. We developed a Web GIS plate tectonics simulation as a capstone learning…

[Early warning for various internal faults of GIS based on ultraviolet spectroscopy].

Science.gov (United States)

Zhao, Yu; Wang, Xian-pei; Hu, Hong-hong; Dai, Dang-dang; Long, Jia-chuan; Tian, Meng; Zhu, Guo-wei; Huang, Yun-guang

2015-02-01

As the basis of accurate diagnosis, fault early-warning of gas insulation switchgear (GIS) focuses on the time-effectiveness and the applicability. It would be significant to research the method of unified early-warning for partial discharge (PD) and overheated faults in GIS. In the present paper, SO2 is proposed as the common and typical by-product. The unified monitoring could be achieved through ultraviolet spectroscopy (UV) detection of SO2. The derivative method and Savitzky-Golay filtering are employed for baseline correction and smoothing. The wavelength range of 290-310 nm is selected for quantitative detection of SO2. Through UV method, the spectral interference of SF6 and other complex by-products, e.g., SOF2 and SOF2, can be avoided and the features of trace SO2 in GIS can be extracted. The detection system is featured by compacted structure, low maintenance and satisfactory suitability in filed surveillance. By conducting SF6 decomposition experiments, including two types of PD faults and the overheated faults between 200-400 degrees C, the feasibility of proposed UV method has been verified. Fourier transform infrared spectroscopy and gas chromatography methods can be used for subsequent fault diagnosis. The different decomposition features in two kinds of faults are confirmed and the diagnosis strategy has been briefly analyzed. The main by-products under PD are SOF2 and SO2F2. The generated SO2 is significantly less than SOF2. More carbonous by-products will be generated when PD involves epoxy. By contrast, when the material of heater is stainless steel, SF6 decomposes at about 300 "C and the main by-products in overheated faults are SO2 and SO2F2. When heated over 350 degrees C, SO2 is generated much faster. SOz content stably increases when the GIS fault lasts. The faults types could be preliminarily identified based on the generation features of SO2.

A Web-Based GIS for Reporting Water Usage in the High Plains Underground Water Conservation District

Science.gov (United States)

Jia, M.; Deeds, N.; Winckler, M.

2012-12-01

The High Plains Underground Water Conservation District (HPWD) is the largest and oldest of the Texas water conservation districts, and oversees approximately 1.7 million irrigated acres. Recent rule changes have motivated HPWD to develop a more automated system to allow owners and operators to report well locations, meter locations, meter readings, the association between meters and wells, and contiguous acres. INTERA, Inc. has developed a web-based interactive system for HPWD water users to report water usage and for the district to better manage its water resources. The HPWD web management system utilizes state-of-the-art GIS techniques, including cloud-based Amazon EC2 virtual machine, ArcGIS Server, ArcSDE and ArcGIS Viewer for Flex, to support web-based water use management. The system enables users to navigate to their area of interest using a well-established base-map and perform a variety of operations and inquiries against their spatial features. The application currently has six components: user privilege management, property management, water meter registration, area registration, meter-well association and water use report. The system is composed of two main databases: spatial database and non-spatial database. With the help of Adobe Flex application at the front end and ArcGIS Server as the middle-ware, the spatial feature geometry and attributes update will be reflected immediately in the back end. As a result, property owners, along with the HPWD staff, collaborate together to weave the fabric of the spatial database. Interactions between the spatial and non-spatial databases are established by Windows Communication Foundation (WCF) services to record water-use report, user-property associations, owner-area associations, as well as meter-well associations. Mobile capabilities will be enabled in the near future for field workers to collect data and synchronize them to the spatial database. The entire solution is built on a highly scalable cloud

GIS-based Multi-criteria land suitability analysis for sustainable ...

Indian Academy of Sciences (India)

43

of Tadla plain (Morocco) using geographic information system (GIS) and analytical ... clean water and air, reducing greenhouse gas emissions, preserving natural ... criteria decision making (MCDM) methods allowed having information from ...

Open-Source web-based geographical information system for health exposure assessment

Directory of Open Access Journals (Sweden)

Evans Barry

2012-01-01

Full Text Available Abstract This paper presents the design and development of an open source web-based Geographical Information System allowing users to visualise, customise and interact with spatial data within their web browser. The developed application shows that by using solely Open Source software it was possible to develop a customisable web based GIS application that provides functions necessary to convey health and environmental data to experts and non-experts alike without the requirement of proprietary software.

Open-Source web-based geographical information system for health exposure assessment

DEFF Research Database (Denmark)

Evans, Barry; Sabel, Clive E

2012-01-01

This paper presents the design and development of an open source web-based Geographical Information System allowing users to visualise, customise and interact with spatial data within their web browser. The developed application shows that by using solely Open Source software it was possible to d...... to develop a customisable web based GIS application that provides functions necessary to convey health and environmental data to experts and non-experts alike without the requirement of proprietary software....

Lentinula edodes based GIS mapping, biometabolites and antiinflamatory activity of wild edible mushrooms

Science.gov (United States)

Khaund, Polashree; Joshi, S R

2016-03-01

The biodiversity rich state of Meghalaya, India located in the realms of mega-biodiversity hotspots, is home to numerous species of wild edible macrofungi that are used extensively by the mycophillic ethnic population, as a part of their traditional cuisine and medicine systems. However, habitat loss, due to deforestation and climate change, is destroying the natural population of these mushrooms, depleting their availability to the local communities. In the present investigation, a GIS guided habitat search, using Lentinula edodes as a representative species, was used in mapping the habitats of wild edible macrofungi of the study region. Sampling of around 4 000 specimens per distinct morphological type available in the traditional markets and “sacred grove” forests indicated presence of ten common genera, belonging to nine different families of wild edible mushrooms. Nutritional profiling of the representative species Lentinula edodes was carried out by evaluation of its moisture, total fat, crude protein and carbohydrates contents by standard methods. Similarly, bioactive components determination was performed by estimation of total phenols, flavonoids, ascorbic acid, β-carotene and lycopenes. Bioactivity of the mushrooms extracts was studied using the DPPH radical scavenging and Human Red Blood Cell (HRBC) membrane stabilization assays. The present investigation successfully attempted to explore remote sensing technologies and GIS (Geographic Information System) based system to predict the natural habitats of wild edible mushrooms of Meghalaya, India which we believe will lead to the generation of a mushroom specific non-wood forest resource mapping system in the near future. Results of nutritional profiling and biological activity studies on the representative species of wild edible mushrooms from the studied region revealed that it is a rich source of essential nutrients and antioxidants.

A geographic approach to modelling human exposure to traffic air pollution using GIS. Separate appendix report

Energy Technology Data Exchange (ETDEWEB)

Solvang Jensen, S.

1998-10-01

A new exposure model has been developed that is based on a physical, single media (air) and single source (traffic) micro environmental approach that estimates traffic related exposures geographically with the postal address as exposure indicator. The micro environments: residence, workplace and street (road user exposure) may be considered. The model estimates outdoor levels for selected ambient air pollutants (benzene, CO, NO{sub 2} and O{sub 3}). The influence of outdoor air pollution on indoor levels can be estimated using average (I/O-ratios. The model has a very high spatial resolution (the address), a high temporal resolution (one hour) and may be used to predict past, present and future exposures. The model may be used for impact assessment of control measures provided that the changes to the model inputs are obtained. The exposure model takes advantage of a standard Geographic Information System (GIS) (ArcView and Avenue) for generation of inputs, for visualisation of input and output, and uses available digital maps, national administrative registers and a local traffic database, and the Danish Operational Street Pollution Model (OSPM). The exposure model presents a new approach to exposure determination by integration of digital maps, administrative registers, a street pollution model and GIS. New methods have been developed to generate the required input parameters for the OSPM model: to geocode buildings using cadastral maps and address points, to automatically generate street configuration data based on digital maps, the BBR and GIS; to predict the temporal variation in traffic and related parameters; and to provide hourly background levels for the OSPM model. (EG)

GIS-based maps and area estimates of Northern Hemisphere permafrost extent during the Last Glacial Maximum

NARCIS (Netherlands)

Lindgren, A.; Hugelius, G.; Kuhry, P.; Christensen, T.R.; Vandenberghe, J.F.

2016-01-01

This study presents GIS-based estimates of permafrost extent in the northern circumpolar region during the Last Glacial Maximum (LGM), based on a review of previously published maps and compilations of field evidence in the form of ice-wedge pseudomorphs and relict sand wedges. We focus on field

A Web-based graphical user interface for evidence-based decision making for health care allocations in rural areas

Science.gov (United States)

Schuurman, Nadine; Leight, Margo; Berube, Myriam

2008-01-01

Background The creation of successful health policy and location of resources increasingly relies on evidence-based decision-making. The development of intuitive, accessible tools to analyse, display and disseminate spatial data potentially provides the basis for sound policy and resource allocation decisions. As health services are rationalized, the development of tools such graphical user interfaces (GUIs) is especially valuable at they assist decision makers in allocating resources such that the maximum number of people are served. GIS can used to develop GUIs that enable spatial decision making. Results We have created a Web-based GUI (wGUI) to assist health policy makers and administrators in the Canadian province of British Columbia make well-informed decisions about the location and allocation of time-sensitive service capacities in rural regions of the province. This tool integrates datasets for existing hospitals and services, regional populations and road networks to allow users to ascertain the percentage of population in any given service catchment who are served by a specific health service, or baskets of linked services. The wGUI allows policy makers to map trauma and obstetric services against rural populations within pre-specified travel distances, illustrating service capacity by region. Conclusion The wGUI can be used by health policy makers and administrators with little or no formal GIS training to visualize multiple health resource allocation scenarios. The GUI is poised to become a critical decision-making tool especially as evidence is increasingly required for distribution of health services. PMID:18793428

A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping

Science.gov (United States)

Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

2014-01-01

Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having “very high susceptibility”, with the further 31% falling into zones classified as having “high susceptibility”. PMID:26089577

Public participatory GIS in community-based disaster risk reduction

Directory of Open Access Journals (Sweden)

Randall B. Kemp

2008-12-01

Introducing PPGIS tools into community-based DRR is not a neutral effort. The information and communication technologies (ICT embedded in GIS can both aid the DRR efforts as well as impact the community in unintended ways. ICTs may be common in communities engaged in DRR efforts so the introduction of PPGIS may have minimal impact. What are the societal ramifications, however, of PPGIS methods in DRR efforts when ICTs are a relatively new aspect of a given community?  What are the communication methods pertinent to PPGIS in the DRR context?  How does the ICT literature address PPGIS methods?  The paper addresses these and other influences of ICT on societies prone to natural hazards.

A GIS based spatially-explicit sensitivity and uncertainty analysis approach for multi-criteria decision analysis☆

Science.gov (United States)

Feizizadeh, Bakhtiar; Jankowski, Piotr; Blaschke, Thomas

2014-01-01

GIS multicriteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for the prediction of future hazards, land use planning, as well as for hazard preparedness. However, the uncertainties associated with MCDA techniques are inevitable and model outcomes are open to multiple types of uncertainty. In this paper, we present a systematic approach to uncertainty and sensitivity analysis. We access the uncertainty of landslide susceptibility maps produced with GIS-MCDA techniques. A new spatially-explicit approach and Dempster–Shafer Theory (DST) are employed to assess the uncertainties associated with two MCDA techniques, namely Analytical Hierarchical Process (AHP) and Ordered Weighted Averaging (OWA) implemented in GIS. The methodology is composed of three different phases. First, weights are computed to express the relative importance of factors (criteria) for landslide susceptibility. Next, the uncertainty and sensitivity of landslide susceptibility is analyzed as a function of weights using Monte Carlo Simulation and Global Sensitivity Analysis. Finally, the results are validated using a landslide inventory database and by applying DST. The comparisons of the obtained landslide susceptibility maps of both MCDA techniques with known landslides show that the AHP outperforms OWA. However, the OWA-generated landslide susceptibility map shows lower uncertainty than the AHP-generated map. The results demonstrate that further improvement in the accuracy of GIS-based MCDA can be achieved by employing an integrated uncertainty–sensitivity analysis approach, in which the uncertainty of landslide susceptibility model is decomposed and attributed to model's criteria weights. PMID:25843987

A GIS based spatially-explicit sensitivity and uncertainty analysis approach for multi-criteria decision analysis.

Science.gov (United States)

Feizizadeh, Bakhtiar; Jankowski, Piotr; Blaschke, Thomas

2014-03-01

GIS multicriteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for the prediction of future hazards, land use planning, as well as for hazard preparedness. However, the uncertainties associated with MCDA techniques are inevitable and model outcomes are open to multiple types of uncertainty. In this paper, we present a systematic approach to uncertainty and sensitivity analysis. We access the uncertainty of landslide susceptibility maps produced with GIS-MCDA techniques. A new spatially-explicit approach and Dempster-Shafer Theory (DST) are employed to assess the uncertainties associated with two MCDA techniques, namely Analytical Hierarchical Process (AHP) and Ordered Weighted Averaging (OWA) implemented in GIS. The methodology is composed of three different phases. First, weights are computed to express the relative importance of factors (criteria) for landslide susceptibility. Next, the uncertainty and sensitivity of landslide susceptibility is analyzed as a function of weights using Monte Carlo Simulation and Global Sensitivity Analysis. Finally, the results are validated using a landslide inventory database and by applying DST. The comparisons of the obtained landslide susceptibility maps of both MCDA techniques with known landslides show that the AHP outperforms OWA. However, the OWA-generated landslide susceptibility map shows lower uncertainty than the AHP-generated map. The results demonstrate that further improvement in the accuracy of GIS-based MCDA can be achieved by employing an integrated uncertainty-sensitivity analysis approach, in which the uncertainty of landslide susceptibility model is decomposed and attributed to model's criteria weights.

The benefits of GIS to land use planning

Science.gov (United States)

Strielko, Irina; Pereira, Paulo

2014-05-01

The development of information technologies has significantly changed the approach to land use and spatial planning, management of natural resources. GIS considerably simplifies territorial planning operating analyzing necessary data concerning their spatial relationship that allows carrying out complex assessment of the situation and creates a basis for adoption of more exact and scientifically reasonable decisions in the course of land use. To assess the current land use situation and the possibility of modeling possible future changes associated with complex of adopted measures GIS allows the integration of diverse spatial data, for example, data about soils, climate, vegetation, and other and also to visualize available information in the form of maps, graphs or charts, 3D models. For the purposes of land use GIS allow using data of remote sensing, which allows to make monitoring of anthropogenic influence in a particular area and estimate scales and rates of degradation of green cover, flora and fauna. Assessment of land use can be made in complex or componentwise, indicating the test sites depending on the goals. GIS make it easy to model spatial distribution of various types of pollution of stationary and mobile sources in soil, atmosphere and the hydrological network. Based on results of the analysis made by GIS choose the optimal solutions of land use that provide the minimum impact on environment, make optimal decisions of conflict associated with land use and control of their using. One of the major advantages of using GIS is possibility of the complex analysis in concrete existential aspect. Analytical opportunities of GIS define conditionality of spatial distribution of objects and interrelation communication between them. For a variety of land management objectives analysis method is chosen based on the parameters of the problem and parameters of use of its results.

GIS-based two-dimensional numerical simulation of rainfall-induced debris flow

Directory of Open Access Journals (Sweden)

C. Wang

2008-02-01

Full Text Available This paper aims to present a useful numerical method to simulate the propagation and deposition of debris flow across the three dimensional complex terrain. A depth-averaged two-dimensional numerical model is developed, in which the debris and water mixture is assumed to be continuous, incompressible, unsteady flow. The model is based on the continuity equations and Navier-Stokes equations. Raster grid networks of digital elevation model in GIS provide a uniform grid system to describe complex topography. As the raster grid can be used as the finite difference mesh, the continuity and momentum equations are solved numerically using the finite difference method. The numerical model is applied to simulate the rainfall-induced debris flow occurred in 20 July 2003, in Minamata City of southern Kyushu, Japan. The simulation reproduces the propagation and deposition and the results are in good agreement with the field investigation. The synthesis of numerical method and GIS makes possible the solution of debris flow over a realistic terrain, and can be used to estimate the flow range, and to define potentially hazardous areas for homes and road section.

Investigating impacts of natural and human-induced environmental changes on hydrological processes and flood hazards using a GIS-based hydrological/hydraulic model and remote sensing data

Science.gov (United States)

Wang, Lei

Natural and human-induced environmental changes have been altering the earth's surface and hydrological processes, and thus directly contribute to the severity of flood hazards. To understand these changes and their impacts, this research developed a GIS-based hydrological and hydraulic modeling system, which incorporates state-of-the-art remote sensing data to simulate flood under various scenarios. The conceptual framework and technical issues of incorporating multi-scale remote sensing data have been addressed. This research develops an object-oriented hydrological modeling framework. Compared with traditional lumped or cell-based distributed hydrological modeling frameworks, the object-oriented framework allows basic spatial hydrologic units to have various size and irregular shape. This framework is capable of assimilating various GIS and remotely-sensed data with different spatial resolutions. It ensures the computational efficiency, while preserving sufficient spatial details of input data and model outputs. Sensitivity analysis and comparison of high resolution LIDAR DEM with traditional USGS 30m resolution DEM suggests that the use of LIDAR DEMs can greatly reduce uncertainty in calibration of flow parameters in the hydrologic model and hence increase the reliability of modeling results. In addition, subtle topographic features and hydrologic objects like surface depressions and detention basins can be extracted from the high resolution LiDAR DEMs. An innovative algorithm has been developed to efficiently delineate surface depressions and detention basins from LiDAR DEMs. Using a time series of Landsat images, a retrospective analysis of surface imperviousness has been conducted to assess the hydrologic impact of urbanization. The analysis reveals that with rapid urbanization the impervious surface has been increased from 10.1% to 38.4% for the case study area during 1974--2002. As a result, the peak flow for a 100-year flood event has increased by 20% and

Use of GIS in visualization of work-related health problems.

Science.gov (United States)

Delaunay, M; Van der Westhuizen, H; Godard, V; Agius, R; Le Barbier, M; Godderis, L; Bonneterre, V

2015-11-01

Occupational health and safety (OHS) information is often complex, diverse and unstructured and suffers from a lack of integration which usually precludes any systemic insight of the situation. To analyse to what extent the use of geographical information systems (GISs) can help to integrate, analyse and present OHS data in a comprehensive and communicable way relevant for surveillance purposes. We first developed a 'macro-approach' (from national to local level), mapping data related to economic activity (denominator of active workers displayed by activity sectors), as well as work-related ill-health (numerators of workers suffering from work-related ill-health). The latter data are composed of compensated occupational diseases on the one hand and work-related diseases investigated by specialized clinics on the other hand. Then, a 'micro-approach' was worked out, integrating at a plant level, using computer-aided drawing, occupational risks data and OHS surveillance data (e.g. use of medication and sickness absence data). At the macro-level, microelectronics companies and workers were mapped at different scales. For the first time, we were able to compare, up to the enterprise level, complementary data showing different pictures of work-related ill-health, allowing a better understanding of OH issues in this sector. At the micro-level, new information arose from the integration of risk assessment data and medical data. This work illustrates to what extent GIS is a promising tool in the OHS field, and discusses related challenges (technical, ethical, biases and interpretation) and research perspectives. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Environmental applications based on GIS and GRID technologies

Science.gov (United States)

Demontis, R.; Lorrai, E.; Marrone, V. A.; Muscas, L.; Spanu, V.; Vacca, A.; Valera, P.

2009-04-01

In the last decades, the collection and use of environmental data has enormously increased in a wide range of applications. Simultaneously, the explosive development of information technology and its ever wider data accessibility have made it possible to store and manipulate huge quantities of data. In this context, the GRID approach is emerging worldwide as a tool allowing to provision a computational task with administratively-distant resources. The aim of this paper is to present three environmental applications (Land Suitability, Desertification Risk Assessment, Georesources and Environmental Geochemistry) foreseen within the AGISGRID (Access and query of a distributed GIS/Database within the GRID infrastructure, http://grida3.crs4.it/enginframe/agisgrid/index.xml) activities of the GRIDA3 (Administrator of sharing resources for data analysis and environmental applications, http://grida3.crs4.it) project. This project, co-funded by the Italian Ministry of research, is based on the use of shared environmental data through GRID technologies and accessible by a WEB interface, aimed at public and private users in the field of environmental management and land use planning. The technologies used for AGISGRID include: - the client-server-middleware iRODS™ (Integrated Rule-Oriented Data System) (https://irods.org); - the EnginFrame system (http://www.nice-italy.com/main/index.php?id=32), the grid portal that supplies a frame to make available, via Intranet/Internet, the developed GRID applications; - the software GIS GRASS (Geographic Resources Analysis Support System) (http://grass.itc.it); - the relational database PostgreSQL (http://www.posgresql.org) and the spatial database extension PostGis; - the open source multiplatform Mapserver (http://mapserver.gis.umn.edu), used to represent the geospatial data through typical WEB GIS functionalities. Three GRID nodes are directly involved in the applications: the application workflow is implemented at the CRS4 (Pula

Challenges in using geographic information systems (GIS to understand and control malaria in Indonesia

Directory of Open Access Journals (Sweden)

Dale Pat

2003-11-01

Full Text Available Abstract Malaria is a mosquito-borne disease of global concern with 1.5 to 2.7 million people dying each year and many more suffering from it. In Indonesia, malaria is a major public health issue with around six million clinical cases and 700 deaths each year. Malaria is most prevalent in the developing countries of the world. Aid agencies have provided financial and technical assistance to malaria-prone countries in an effort to battle the disease. Over the past decade, the focus of some of this assistance has been in the provision of geographic information systems (GIS hardware, software and training. In theory, GIS can be a very effective tool in combating malaria, however, in practice there have been a host of challenges to its successful use. This review is based, in part, on the literature but also on our experience working with the Indonesian Ministry of Health. The review identifies three broad problem areas. The first of these relates to data concerns. Without adequate data, GIS is not very useful. Specific problem areas include: accurate data on the disease and how it is reported; basic environmental data on vegetation, land uses, topography, rainfall, etc.; and demographic data on the movement of people. The second problem area involves technology – specifically computer hardware, GIS software and training. The third problem area concerns methods – assuming the previous data and technological problems have been resolved – how can GIS be used to improve our understanding of malaria? One of the main methodological tools is spatial statistical analysis, however, this is a newly developing field, is not easy to understand and suffers from the fact that there is no agreement on standard methods of analysis. The paper concludes with a discussion of strategies that can be used to overcome some of these problems. One of these strategies involves using ArcView GIS software in combination with ArcExplorer (a public domain program that can

GIS-based integrated groundwater potential assessment of Osun ...

African Journals Online (AJOL)

Topographic parameters including surface curvatures, slope and elevation were derived from SPOT DEM and used to generate landform and relief maps for the study area. Spatial Analysis Module of ArcGIS 10.3 software was used to generate lineament proximity, hydrolineament density and drainage density maps for the ...

Open Source GIS based integrated watershed management

Science.gov (United States)

Byrne, J. M.; Lindsay, J.; Berg, A. A.

2013-12-01

Optimal land and water management to address future and current resource stresses and allocation challenges requires the development of state-of-the-art geomatics and hydrological modelling tools. Future hydrological modelling tools should be of high resolution, process based with real-time capability to assess changing resource issues critical to short, medium and long-term enviromental management. The objective here is to merge two renowned, well published resource modeling programs to create an source toolbox for integrated land and water management applications. This work will facilitate a much increased efficiency in land and water resource security, management and planning. Following an 'open-source' philosophy, the tools will be computer platform independent with source code freely available, maximizing knowledge transfer and the global value of the proposed research. The envisioned set of water resource management tools will be housed within 'Whitebox Geospatial Analysis Tools'. Whitebox, is an open-source geographical information system (GIS) developed by Dr. John Lindsay at the University of Guelph. The emphasis of the Whitebox project has been to develop a user-friendly interface for advanced spatial analysis in environmental applications. The plugin architecture of the software is ideal for the tight-integration of spatially distributed models and spatial analysis algorithms such as those contained within the GENESYS suite. Open-source development extends knowledge and technology transfer to a broad range of end-users and builds Canadian capability to address complex resource management problems with better tools and expertise for managers in Canada and around the world. GENESYS (Generate Earth Systems Science input) is an innovative, efficient, high-resolution hydro- and agro-meteorological model for complex terrain watersheds developed under the direction of Dr. James Byrne. GENESYS is an outstanding research and applications tool to address

Considerations in the development of generic human health-based soil quality guidelines for uranium

International Nuclear Information System (INIS)

Richardson, G.M.; Petrovic, S.; Purtill, C.; Wilson, R.

2006-01-01

At the current time in Canada, no human health-based generic (national) soil quality guidelines (SQG HH ) exist for uranium. This paper explores some of the various methods that could be used to develop human health soil guideline values for this element. To determine possible values that may be appropriate for use in Canada, the authors have applied both the existing CCME approach (1996) and the draft revised CCME approach (2005) to estimate possible SQG HH for uranium for various land uses. (author)

Web GIS in practice VI: a demo playlist of geo-mashups for public health neogeographers

Directory of Open Access Journals (Sweden)

Cheung Kei-Hoi

2008-07-01

Full Text Available Abstract 'Mashup' was originally used to describe the mixing together of musical tracks to create a new piece of music. The term now refers to Web sites or services that weave data from different sources into a new data source or service. Using a musical metaphor that builds on the origin of the word 'mashup', this paper presents a demonstration "playlist" of four geo-mashup vignettes that make use of a range of Web 2.0, Semantic Web, and 3-D Internet methods, with outputs/end-user interfaces spanning the flat Web (two-dimensional – 2-D maps, a three-dimensional – 3-D mirror world (Google Earth and a 3-D virtual world (Second Life ®. The four geo-mashup "songs" in this "playlist" are: 'Web 2.0 and GIS (Geographic Information Systems for infectious disease surveillance', 'Web 2.0 and GIS for molecular epidemiology', 'Semantic Web for GIS mashup', and 'From Yahoo! Pipes to 3-D, avatar-inhabited geo-mashups'. It is hoped that this showcase of examples and ideas, and the pointers we are providing to the many online tools that are freely available today for creating, sharing and reusing geo-mashups with minimal or no coding, will ultimately spark the imagination of many public health practitioners and stimulate them to start exploring the use of these methods and tools in their day-to-day practice. The paper also discusses how today's Web is rapidly evolving into a much more intensely immersive, mixed-reality and ubiquitous socio-experiential Metaverse that is heavily interconnected through various kinds of user-created mashups.

ArcGIS 9.3 ed i database spaziali: gli scenari di utilizzo

Directory of Open Access Journals (Sweden)

Francesco Bartoli

2009-03-01

Full Text Available ArcGis 9.3 and spatial databases: application sceneriesThe latest news from ESRI suggests that it will soon be possible to link to the PostgreSQL database. This resulted in a collaboration between the PostGis geometry model with SDOGEOMETRY - the oracle database - a hierarchial and spatial design database. This had a direct impact on the PMI review and the business models of local governments. ArcSdewould be replaced by Zig-Gis 2.0 providing greater offerings to the GIS community. Harnessing this system will take advantage of human resources to aid in the design of potentconceptual data models. Further funds are still requiredto promote the product under a prominent license.

Distribution and health risk assessment of natural fluoride of drinking groundwater resources of Isfahan, Iran, using GIS.

Science.gov (United States)

Aghapour, Saba; Bina, Bijan; Tarrahi, Mohammad Javad; Amiri, Fahimeh; Ebrahimi, Afshin

2018-02-13

Fluoride (F) contamination in groundwater can be problematic to human health. This study evaluated the concentration of fluoride in groundwater resources of Isfahan Province, the central plateau of Iran, and its related health issues to the inhabitant populations. For this purpose, 573 drinking groundwater samples were analyzed in 2016 by using the spectrophotometric method. Non-carcinogenic health risks due to F exposure through consumption of drinking water were assessed using the US EPA method. In addition, the associated zoning maps of the obtained results were presented using geographic information system (GIS). The results indicated that F content in drinking water ranged from 0.02 to 2.8 mg/L. The F contents were less than 0.50 mg/L in 63% of the drinking groundwater samples, 0.51-1.5 mg/L in 33.15%, and higher than 1.5 mg/L in 3.85% (Iran and World Health Organization guidelines) of the drinking groundwater samples. The F levels in the west and the south groundwater resources of the study areas were lower than 0.5 mg/L, which is within the recommended values for controlling dental caries (0.50-1.0 mg/L). Therefore, these places require more attention and more research is needed to increase F intake for health benefit. The HQ index for children, teens and male and female adults had health hazards (HQ > 1) in 51, 17, 28, and 18 of samples, respectively. Groundwater resources having a risk of more than one were located in the counties of Nayin, Natanz, and Ardestan. So, in these areas, there are potential risks of dental fluorosis. The most vulnerable groups were children. The F levels must be reduced in this region to decrease endemic fluorosis.

URBAN RAIN GAUGE SITING SELECTION BASED ON GIS-MULTICRITERIA ANALYSIS

Directory of Open Access Journals (Sweden)

Y. Fu

2016-06-01

Full Text Available With the increasingly rapid growth of urbanization and climate change, urban rainfall monitoring as well as urban waterlogging has widely been paid attention. In the light of conventional siting selection methods do not take into consideration of geographic surroundings and spatial-temporal scale for the urban rain gauge site selection, this paper primarily aims at finding the appropriate siting selection rules and methods for rain gauge in urban area. Additionally, for optimization gauge location, a spatial decision support system (DSS aided by geographical information system (GIS has been developed. In terms of a series of criteria, the rain gauge optimal site-search problem can be addressed by a multicriteria decision analysis (MCDA. A series of spatial analytical techniques are required for MCDA to identify the prospective sites. With the platform of GIS, using spatial kernel density analysis can reflect the population density; GIS buffer analysis is used to optimize the location with the rain gauge signal transmission character. Experiment results show that the rules and the proposed method are proper for the rain gauge site selection in urban areas, which is significant for the siting selection of urban hydrological facilities and infrastructure, such as water gauge.

Engineering sustainable ecosystems: using GIS-based habitat modeling for oil sands mine reclamation and closure planning

International Nuclear Information System (INIS)

Seel, K.

1997-01-01

A GIS model was built to predict the climax vegetation habitat types on reclaimed mine surfaces in the Fort McMurray region of the Mid-Boreal Mixedwood Ecoregion of northwestern Alberta. Regional vegetation habitat types were classified by digital remote sensing using Landsat Thematic Mapper satellite data. Terrain data was derived from a high-resolution digital elevation model. The validated model was applied to the GIS database of Syncrude Canada's Mildred Lake Mine to predict future vegetation patterns based on the final closure mine surface. The results were compared to revegetation and closure plans created by experts to analyze performance and sustainability of reclamation efforts

GIS-based multicriteria municipal solid waste landfill suitability analysis: a review of the methodologies performed and criteria implemented.

Science.gov (United States)

Demesouka, O E; Vavatsikos, A P; Anagnostopoulos, K P

2014-04-01

Multicriteria spatial decision support systems (MC-SDSS) have emerged as an integration of the geographical information systems (GIS) and multiple criteria decision analysis (MCDA) methods. GIS-based MCDA allows the incorporation of conflicting objectives and decision maker (DM) preferences into spatial decision models. During recent decades, a variety of research articles have been published regarding the implementation of methods and/or tools in a variety of real-world case studies. The article discusses, in detail, the criteria and methods that are implemented in GIS-based landfill siting suitability analysis and especially the exclusionary and non-exclusionary criteria that can be considered when selecting sites for municipal solid waste (MSW) landfills. This paper reviews 36 seminal articles in which the evaluation of candidate landfill sites is conducted using MCDA methods. After a brief description of the main components of a MC-SDSS and the applied decision rules, the review focuses on the criteria incorporated into the decision models. The review provides a comprehensive guide to the landfill siting analysis criteria, providing details regarding the utilization methods, their decision or exclusionary nature and their monotonicity.

L’analisi spaziale tramite GIS a supporto di filiere agroenergetiche

Directory of Open Access Journals (Sweden)

Flavio Lupia

2008-03-01

Full Text Available GIS spatial analysis in support of agroenergy developmentA feasibility study for an agro-energy district in the Latium region has been carried out using GIS tools to evaluate suitable areas for the cultivation of new energy crops for biofuel. This paper briefly describes the results of the sunflower land suitability analysis. The methodology used is based on crop suitability factors, cultivation constraints and GIS processing.The core processing is based on a multi-criteria analysis. The final result is a crop land suitability map.

Statistical Validation of a Web-Based GIS Application and Its Applicability to Cardiovascular-Related Studies

Directory of Open Access Journals (Sweden)

Jae Eun Lee

2015-12-01

Full Text Available Purpose: There is abundant evidence that neighborhood characteristics are significantly linked to the health of the inhabitants of a given space within a given time frame. This study is to statistically validate a web-based GIS application designed to support cardiovascular-related research developed by the NIH funded Research Centers in Minority Institutions (RCMI Translational Research Network (RTRN Data Coordinating Center (DCC and discuss its applicability to cardiovascular studies. Methods: Geo-referencing, geocoding and geospatial analyses were conducted for 500 randomly selected home addresses in a U.S. southeastern Metropolitan area. The correlation coefficient, factor analysis and Cronbach’s alpha (α were estimated to quantify measures of the internal consistency, reliability and construct/criterion/discriminant validity of the cardiovascular-related geospatial variables (walk score, number of hospitals, fast food restaurants, parks and sidewalks. Results: Cronbach’s α for CVD GEOSPATIAL variables was 95.5%, implying successful internal consistency. Walk scores were significantly correlated with number of hospitals (r = 0.715; p < 0.0001, fast food restaurants (r = 0.729; p < 0.0001, parks (r = 0.773; p < 0.0001 and sidewalks (r = 0.648; p < 0.0001 within a mile from homes. It was also significantly associated with diversity index (r = 0.138, p = 0.0023, median household incomes (r = −0.181; p < 0.0001, and owner occupied rates (r = −0.440; p < 0.0001. However, its non-significant correlation was found with median age, vulnerability, unemployment rate, labor force, and population growth rate. Conclusion: Our data demonstrates that geospatial data generated by the web-based application were internally consistent and demonstrated satisfactory validity. Therefore, the GIS application may be useful to apply to cardiovascular-related studies aimed to investigate potential impact of geospatial factors on diseases and/or the long

HiGIS: An Open Framework for High Performance Geographic Information System

Directory of Open Access Journals (Sweden)

XIONG, W.

2015-08-01

Full Text Available Big data era expose many challenges to geospatial data management, geocomputation and cartography. There is no exception in geographic information systems (GIS community. Technologies and facilities of high performance computing (HPC become more and more feasible to researchers, while mobile computing, ubiquitous computing, and cloud computing are emerging. But traditional GIS need to be improved to take advantages of all these evolutions. We proposed and implemented a GIS married with high performance computing, which is called HiGIS. The goal of HiGIS is to promote the performance of geocomputation by leveraging the power of HPC, and to build an open framework for geospatial data storing, processing, displaying and sharing. In this paper the architecture, data model and modules of the HiGIS system are introduced. A geocomputation scheduling engine based on communicating sequential process was designed to exploit spatial analysis and processing. Parallel I/O strategy using file view was proposed to improve the performance of geospatial raster data access. In order to support web-based online mapping, an interactive cartographic script was provided to represent a map. A demostration of locating house was used to manifest the characteristics of HiGIS. Parallel and concurrency performance experiments show the feasibility of this system.

Air quality mapping using GIS and economic evaluation of health impact for Mumbai City, India.

Science.gov (United States)

Kumar, Awkash; Gupta, Indrani; Brandt, Jørgen; Kumar, Rakesh; Dikshit, Anil Kumar; Patil, Rashmi S

2016-05-01

Mumbai, a highly populated city in India, has been selected for air quality mapping and assessment of health impact using monitored air quality data. Air quality monitoring networks in Mumbai are operated by National Environment Engineering Research Institute (NEERI), Maharashtra Pollution Control Board (MPCB), and Brihanmumbai Municipal Corporation (BMC). A monitoring station represents air quality at a particular location, while we need spatial variation for air quality management. Here, air quality monitored data of NEERI and BMC were spatially interpolated using various inbuilt interpolation techniques of ArcGIS. Inverse distance weighting (IDW), Kriging (spherical and Gaussian), and spline techniques have been applied for spatial interpolation for this study. The interpolated results of air pollutants sulfur dioxide (SO2), nitrogen dioxide (NO2) and suspended particulate matter (SPM) were compared with air quality data of MPCB in the same region. Comparison of results showed good agreement for predicted values using IDW and Kriging with observed data. Subsequently, health impact assessment of a ward was carried out based on total population of the ward and air quality monitored data within the ward. Finally, health cost within a ward was estimated on the basis of exposed population. This study helps to estimate the valuation of health damage due to air pollution. Operating more air quality monitoring stations for measurement of air quality is highly resource intensive in terms of time and cost. The appropriate spatial interpolation techniques can be used to estimate concentration where air quality monitoring stations are not available. Further, health impact assessment for the population of the city and estimation of economic cost of health damage due to ambient air quality can help to make rational control strategies for environmental management. The total health cost for Mumbai city for the year 2012, with a population of 12.4 million, was estimated as USD

Object-Based Change Detection Using High-Resolution Remotely Sensed Data and GIS

Science.gov (United States)

Sofina, N.; Ehlers, M.

2012-08-01

High resolution remotely sensed images provide current, detailed, and accurate information for large areas of the earth surface which can be used for change detection analyses. Conventional methods of image processing permit detection of changes by comparing remotely sensed multitemporal images. However, for performing a successful analysis it is desirable to take images from the same sensor which should be acquired at the same time of season, at the same time of a day, and - for electro-optical sensors - in cloudless conditions. Thus, a change detection analysis could be problematic especially for sudden catastrophic events. A promising alternative is the use of vector-based maps containing information about the original urban layout which can be related to a single image obtained after the catastrophe. The paper describes a methodology for an object-based search of destroyed buildings as a consequence of a natural or man-made catastrophe (e.g., earthquakes, flooding, civil war). The analysis is based on remotely sensed and vector GIS data. It includes three main steps: (i) generation of features describing the state of buildings; (ii) classification of building conditions; and (iii) data import into a GIS. One of the proposed features is a newly developed 'Detected Part of Contour' (DPC). Additionally, several features based on the analysis of textural information corresponding to the investigated vector objects are calculated. The method is applied to remotely sensed images of areas that have been subjected to an earthquake. The results show the high reliability of the DPC feature as an indicator for change.

GIS-based Approach to Estimate Surface Runoff in Small Catchments: A Case Study

Directory of Open Access Journals (Sweden)

Vojtek Matej

2016-09-01

Full Text Available The issue of surface runoff assessment is one of the important and relevant topics of hydrological as well as geographical research. The aim of the paper is therefore to estimate and assess surface runoff on the example of Vyčoma catchment which is located in the Western Slovakia. For this purpose, SCS runoff curve number method, modeling in GIS and remote sensing were used. An important task was the creation of a digital elevation model (DEM, which enters the surface runoff modeling and affects its accuracy. Great attention was paid to the spatial interpretation of land use categories applying aerial imagery from 2013 and hydrological soil groups as well as calculation of maximum daily rainfall with N-year return periods as partial tasks in estimating surface runoff. From the methodological point of view, the importance of the paper can be seen in the use of a simple GIS-based approach to assess the surface runoff conditions in a small catchment.

Research of Ancient Architectures in Jin-Fen Area Based on GIS&BIM Technology

Science.gov (United States)

Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

2017-05-01

The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation & restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching & collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS&BIM technology, could be constructed to support the

GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran.

Science.gov (United States)

Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

2015-01-01

Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor's Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the car

GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran

Science.gov (United States)

Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

2015-01-01

Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor’s Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the

Integrating remote sensing with GIS-based multi-criteria evaluation approach for Karst rocky desertification assessment in Southwest of China

International Nuclear Information System (INIS)

Zhang, Z; Xu, W; Zhou, W; Zhang, L; Xiao, Y; Ouyang, Z; Ou, X

2014-01-01

The increasing exploitation of Karst resources is leading to severe environmental impacts, as Karst frequently occurs in the most fragile and vulnerable environments. This paper presents a multi-criteria evaluation (MCE) approach in a spatial context to support Karst rocky desertification (KRD) assessment by integrating remote sensing data with GIS. The study area is located in Wenshan Prefecture, Yunnan Province, Southwest of China. Criteria and impact factors for KRD first were identified and weighted through pairwise comparison method. A GIS fuzzy set membership function was then used to generate gradient effects of each criterion, and a clustering method based on K-mean algorithms was used to classify KRD into several descending rank zones (or levels). Both ROC and error matrix assessments indicated that the MCE approach is better than the NDVI approach. In addition, we found it is useful to integrate the topographic and human disturbance factors into KRD mapping and assessment, compared with most of the previous KRD assessment studies mainly focused on developing vegetation or land cover information in karst regions by using remote sensing alone. Furthermore, the integrated MCE approach is robust, flexible, and easy to be implemented. It also explicitly includes the quantitative and qualitative information, for instance, opinions of decision makers and experts as well as characteristics of the landscape

Comparison of regression coefficient and GIS-based methodologies for regional estimates of forest soil carbon stocks

International Nuclear Information System (INIS)

Elliott Campbell, J.; Moen, Jeremie C.; Ney, Richard A.; Schnoor, Jerald L.

2008-01-01

Estimates of forest soil organic carbon (SOC) have applications in carbon science, soil quality studies, carbon sequestration technologies, and carbon trading. Forest SOC has been modeled using a regression coefficient methodology that applies mean SOC densities (mass/area) to broad forest regions. A higher resolution model is based on an approach that employs a geographic information system (GIS) with soil databases and satellite-derived landcover images. Despite this advancement, the regression approach remains the basis of current state and federal level greenhouse gas inventories. Both approaches are analyzed in detail for Wisconsin forest soils from 1983 to 2001, applying rigorous error-fixing algorithms to soil databases. Resulting SOC stock estimates are 20% larger when determined using the GIS method rather than the regression approach. Average annual rates of increase in SOC stocks are 3.6 and 1.0 million metric tons of carbon per year for the GIS and regression approaches respectively. - Large differences in estimates of soil organic carbon stocks and annual changes in stocks for Wisconsin forestlands indicate a need for validation from forthcoming forest surveys

Application of GIS-based SCS-CN method in West Bank catchments, Palestine

OpenAIRE

Sameer Shadeed; Mohammad Almasri

2010-01-01

Among the most basic challenges of hydrology are the prediction and quantification of catchment surface runoff. The runoff curve number (CN) is a key factor in determining runoff in the SCS (Soil Conservation Service) based hydrologic modeling method. The traditional SCS-CN method for calculating the composite curve number is very tedious and consumes a major portion of the hydrologic modeling time. Therefore, geographic information systems (GIS) are now being used in combination with the SCS...

Using Geographic Information Systems (GIS) to assess outcome disparities in patients with type 2 diabetes and hyperlipidemia.

Science.gov (United States)

Geraghty, Estella M; Balsbaugh, Thomas; Nuovo, Jim; Tandon, Sanjeev

2010-01-01

Geographic information systems (GIS) tools can help expand our understanding of disparities in health outcomes within a community. The purpose of this project was (1) to demonstrate the methods to link a disease management registry with a GIS mapping and analysis program, (2) to address the challenges that occur when performing this link, and (3) to analyze the outcome disparities resulting from this assessment tool in a population of patients with type 2 diabetes mellitus. We used registry data derived from the University of California Davis Health System's electronic medical record system to identify patients with diabetes mellitus from a network of 13 primary care clinics in the greater Sacramento area. This information was converted to a database file for use in the GIS software. Geocoding was performed and after excluding those who had unknown home addresses we matched 8528 unique patient records with their respective home addresses. Socioeconomic and demographic data were obtained from the Geolytics, Inc. (East Brunswick, NJ), a provider of US Census Bureau data, with 2008 estimates and projections. Patient, socioeconomic, and demographic data were then joined to a single database. We conducted regression analysis assessing A1c level based on each patient's demographic and laboratory characteristics and their neighborhood characteristics (socioeconomic status [SES] quintile). Similar analysis was done for low-density lipoprotein cholesterol. After excluding ineligible patients, the data from 7288 patients were analyzed. The most notable findings were as follows: There was, there was found an association between neighborhood SES and A1c. SES was not associated with low-density lipoprotein control. GIS methodology can assist primary care physicians and provide guidance for disease management programs. It can also help health systems in their mission to improve the health of a community. Our analysis found that neighborhood SES was a barrier to optimal glucose

Study on methods and techniques of aeroradiometric weak information extraction for sandstone-hosted uranium deposits based on GIS

International Nuclear Information System (INIS)

Han Shaoyang; Ke Dan; Hou Huiqun

2005-01-01

The weak information extraction is one of the important research contents in the current sandstone-type uranium prospecting in China. This paper introduces the connotation of aeroradiometric weak information extraction, and discusses the formation theories of aeroradiometric weak information extraction, and discusses the formation theories of aeroradiometric weak information and establishes some effective mathematic models for weak information extraction. Models for weak information extraction are realized based on GIS software platform. Application tests of weak information extraction are realized based on GIS software platform. Application tests of weak information extraction are completed in known uranium mineralized areas. Research results prove that the prospective areas of sandstone-type uranium deposits can be rapidly delineated by extracting aeroradiometric weak information. (authors)

Development of a web GIS application for emissions inventory spatial allocation based on open source software tools

Science.gov (United States)

Gkatzoflias, Dimitrios; Mellios, Giorgos; Samaras, Zissis

2013-03-01

Combining emission inventory methods and geographic information systems (GIS) remains a key issue for environmental modelling and management purposes. This paper examines the development of a web GIS application as part of an emission inventory system that produces maps and files with spatial allocated emissions in a grid format. The study is not confined in the maps produced but also presents the features and capabilities of a web application that can be used by every user even without any prior knowledge of the GIS field. The development of the application was based on open source software tools such as MapServer for the GIS functions, PostgreSQL and PostGIS for the data management and HTML, PHP and JavaScript as programming languages. In addition, background processes are used in an innovative manner to handle the time consuming and computational costly procedures of the application. Furthermore, a web map service was created to provide maps to other clients such as the Google Maps API v3 that is used as part of the user interface. The output of the application includes maps in vector and raster format, maps with temporal resolution on daily and hourly basis, grid files that can be used by air quality management systems and grid files consistent with the European Monitoring and Evaluation Programme Grid. Although the system was developed and validated for the Republic of Cyprus covering a remarkable wide range of pollutant and emissions sources, it can be easily customized for use in other countries or smaller areas, as long as geospatial and activity data are available.

A Modular GIS-Based Software Architecture for Model Parameter Estimation using the Method of Anchored Distributions (MAD)

Science.gov (United States)

Ames, D. P.; Osorio-Murillo, C.; Over, M. W.; Rubin, Y.

2012-12-01

The Method of Anchored Distributions (MAD) is an inverse modeling technique that is well-suited for estimation of spatially varying parameter fields using limited observations and Bayesian methods. This presentation will discuss the design, development, and testing of a free software implementation of the MAD technique using the open source DotSpatial geographic information system (GIS) framework, R statistical software, and the MODFLOW groundwater model. This new tool, dubbed MAD-GIS, is built using a modular architecture that supports the integration of external analytical tools and models for key computational processes including a forward model (e.g. MODFLOW, HYDRUS) and geostatistical analysis (e.g. R, GSLIB). The GIS-based graphical user interface provides a relatively simple way for new users of the technique to prepare the spatial domain, to identify observation and anchor points, to perform the MAD analysis using a selected forward model, and to view results. MAD-GIS uses the Managed Extensibility Framework (MEF) provided by the Microsoft .NET programming platform to support integration of different modeling and analytical tools at run-time through a custom "driver." Each driver establishes a connection with external programs through a programming interface, which provides the elements for communicating with core MAD software. This presentation gives an example of adapting the MODFLOW to serve as the external forward model in MAD-GIS for inferring the distribution functions of key MODFLOW parameters. Additional drivers for other models are being developed and it is expected that the open source nature of the project will engender the development of additional model drivers by 3rd party scientists.

FY 1999 basic survey of coal resource development. Coal GIS survey; 1999 nendo sekitan shigen kaihatsu kiso chosa. Sekitan GIS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The purpose of this survey is to construct a comprehensive coal field assessment technology system which can promptly cope with any natural conditions/geological situations of coal field. As to the GIS (geographical information system) which can unifiedly manage/analyze various data being used in other fields, survey was conducted of present situations/technology trends of the resource related GIS, and at the same time the survey is aimed at applying it to the coal resource field. In the survey in this fiscal year, based on the survey made in FY 1998, applicability of GIS function was verified for Australia where the coal GIS is prepared. And the fundamental design was made to construct a coal GIS considered of concrete application in the stage of coal resource exploration and resource assessment. In the fundamental design, prototypes of individual functions of the system were made. Making the analysis using the actual data, expansion and complication of the system size were advanced step by step toward the completion of the system. Such prototypical development method was adopted. (NEDO)

Use of GIS-Based Sampling to Inform Food Security Assessments and Decision Making in Kenya

Science.gov (United States)

Wahome, A.; Ndubi, A. O.; Ndungu, L. W.; Mugo, R. M.; Flores Cordova, A. I.

2017-12-01

Kenya relies on agricultural production for supporting local consumption and other processing value chains. With changing climate in a rain-fed dependent agricultural production system, cropping zones are shifting and proper decision making will require updated data. Where up-to-date data is not available it is important that it is generated and passed over to relevant stakeholders to inform their decision making. The process of generating this data should be cost effective and less time consuming. The Kenyan State Department of Agriculture (SDA) runs an insurance programme for maize farmers in a number of counties in Kenya. Previously, SDA was using a list of farmers to identify the crop fields for this insurance programme. However, the process of listing of all farmers in each Unit Area of Insurance (UAI) proved to be tedious and very costly, hence need for an alternative approach, but acceptable sampling methodology. Building on the existing cropland maps, SERVIR, a joint NASA-USAID initiative that brings Earth observations (EO) for improved environmental decision making in developing countries, specifically its hub in Eastern and Soutehrn Africa developed a High Resolution Map based on 10m Sentinel satellite images from which a GIS based sampling frame for identifying maize fields was developed. Sampling points were randomly generated in each UAI and navigated to using hand-held GPS units for identification of maize farmers. In the GIS-based identification of farmers SDA uses 1 day to cover an area covered in 1 week by list identification of farmers. Similarly, SDA spends approximately 3,000 USD per sub-county to locate maize fields using GIS-based sampling as compared 10,000 USD they used to spend before. This has resulted in 70% cost reduction.

Quantifying human disturbance in watersheds: Variable selection and performance of a GIS-based disturbance index for predicting the biological condition of perennial streams

Science.gov (United States)

Falcone, James A.; Carlisle, Daren M.; Weber, Lisa C.

2010-01-01

Characterizing the relative severity of human disturbance in watersheds is often part of stream assessments and is frequently done with the aid of Geographic Information System (GIS)-derived data. However, the choice of variables and how they are used to quantify disturbance are often subjective. In this study, we developed a number of disturbance indices by testing sets of variables, scoring methods, and weightings of 33 potential disturbance factors derived from readily available GIS data. The indices were calibrated using 770 watersheds located in the western United States for which the severity of disturbance had previously been classified from detailed local data by the United States Environmental Protection Agency (USEPA) Environmental Monitoring and Assessment Program (EMAP). The indices were calibrated by determining which variable or variable combinations and aggregation method best differentiated between least- and most-disturbed sites. Indices composed of several variables performed better than any individual variable, and best results came from a threshold method of scoring using six uncorrelated variables: housing unit density, road density, pesticide application, dam storage, land cover along a mainstem buffer, and distance to nearest canal/pipeline. The final index was validated with 192 withheld watersheds and correctly classified about two-thirds (68%) of least- and most-disturbed sites. These results provide information about the potential for using a disturbance index as a screening tool for a priori ranking of watersheds at a regional/national scale, and which landscape variables and methods of combination may be most helpful in doing so.

Applications and issues of GIS as tool for civil engineering modeling

Science.gov (United States)

Miles, S.B.; Ho, C.L.

1999-01-01

A tool that has proliferated within civil engineering in recent years is geographic information systems (GIS). The goal of a tool is to supplement ability and knowledge that already exists, not to serve as a replacement for that which is lacking. To secure the benefits and avoid misuse of a burgeoning tool, engineers must understand the limitations, alternatives, and context of the tool. The common benefits of using GIS as a supplement to engineering modeling are summarized. Several brief case studies of GIS modeling applications are taken from popular civil engineering literature to demonstrate the wide use and varied implementation of GIS across the discipline. Drawing from the case studies, limitations regarding traditional GIS data models find the implementation of civil engineering models within current GIS are identified and countered by discussing the direction of the next generation of GIS. The paper concludes by highlighting the potential for the misuse of GIS in the context of engineering modeling and suggests that this potential can be reduced through education and awareness. The goal of this paper is to promote awareness of the issues related to GIS-based modeling and to assist in the formulation of questions regarding the application of current GIS. The technology has experienced much publicity of late, with many engineers being perhaps too excited about the usefulness of current GIS. An undoubtedly beneficial side effect of this, however, is that engineers are becoming more aware of GIS and, hopefully, the associated subtleties. Civil engineers must stay informed of GIS issues and progress, but more importantly, civil engineers must inform the GIS community to direct the technology development optimally.

Open source GIS for HIV/AIDS management

Directory of Open Access Journals (Sweden)

Ricketts Adam

2008-10-01

Full Text Available Abstract Background Reliable access to basic services can improve a community's resilience to HIV/AIDS. Accordingly, work is being done to upgrade the physical infrastructure in affected areas, often employing a strategy of decentralised service provision. Spatial characteristics are one of the major determinants in implementing services, even in the smaller municipal areas, and good quality spatial information is needed to inform decision making processes. However, limited funds, technical infrastructure and human resource capacity result in little or no access to spatial information for crucial infrastructure development decisions at local level. This research investigated whether it would be possible to develop a GIS for basic infrastructure planning and management at local level. Given the resource constraints of the local government context, particularly in small municipalities, it was decided that open source software should be used for the prototype system. Results The design and development of a prototype system illustrated that it is possible to develop an open source GIS system that can be used within the context of local information management. Usability tests show a high degree of usability for the system, which is important considering the heavy workload and high staff turnover that characterises local government in South Africa. Local infrastructure management stakeholders interviewed in a case study of a South African municipality see the potential for the use of GIS as a communication tool and are generally positive about the use of GIS for these purposes. They note security issues that may arise through the sharing of information, lack of skills and resource constraints as the major barriers to adoption. Conclusion The case study shows that spatial information is an identified need at local level. Open source GIS software can be used to develop a system to provide local-level stakeholders with spatial information. However, the

Spatial pattern of 2009 dengue distribution in Kuala Lumpur using GIS application.

Science.gov (United States)

Aziz, S; Ngui, R; Lim, Y A L; Sholehah, I; Nur Farhana, J; Azizan, A S; Wan Yusoff, W S

2012-03-01

In the last few years in Malaysia, dengue fever has increased dramatically and has caused huge public health concerns. The present study aimed to establish a spatial distribution of dengue cases in the city of Kuala Lumpur using a combination of Geographic Information System (GIS) and spatial statistical tools. Collation of data from 1,618 dengue cases in 2009 was obtained from Kuala Lumpur City Hall (DBKL). These data were processed and then converted into GIS format. Information on the average monthly rainfall was also used to correlate with the distribution pattern of dengue cases. To asses the spatial distribution of dengue cases, Average Nearest Neighbor (ANN) Analysis was applied together with spatial analysis with the ESRI ArcGIS V9.3 programme. Results indicated that the distribution of dengue cases in Kuala Lumpur for the year 2009 was spatially clustered with R value less than 1 (R = 0.42; z-scores = - 4.47; p 1) between August and November. In addition, the mean monthly rainfall has not influenced the distribution pattern of the dengue cases. Implementation of control measures is more difficult for dispersed pattern compared to clustered pattern. From this study, it was found that distribution pattern of dengue cases in Kuala Lumpur in 2009 was spatially distributed (dispersed or clustered) rather than cases occurring randomly. It was proven that by using GIS and spatial statistic tools, we can determine the spatial distribution between dengue and population. Utilization of GIS tools is vital in assisting health agencies, epidemiologist, public health officer, town planner and relevant authorities in developing efficient control measures and contingency programmes to effectively combat dengue fever.

GIS in Evaluation: Utilizing the Power of Geographic Information Systems to Represent Evaluation Data

Science.gov (United States)

Azzam, Tarek; Robinson, David

2013-01-01

This article provides an introduction to geographic information systems (GIS) and how the technology can be used to enhance evaluation practice. As a tool, GIS enables evaluators to incorporate contextual features (such as accessibility of program sites or community health needs) into evaluation designs and highlights the interactions between…

Renewable energies supported by GIS and land management; Erneuerbare Energien unterstuetzt durch GIS und Landmanagement

Energy Technology Data Exchange (ETDEWEB)

Klaerle, Martina (ed.)

2012-11-01

The author of the book under consideration reports on the support of renewable energy sources by Geographical Information Systems (GIS) and land management. The first part of this book is addressed to actual land political and planning legal fundamentals of the energy policy turnaround as well as on future developments of the planning instruments. The second part of this book presents GIS based tools and concrete application examples which are very valuable for regional authorities in the implementation of the energy policy turnaround: solar plant cadastre, holistic potential analysis for all forms of renewable energy systems, visibility studies, flexible power grids and so forth.

Introduction to the Special Issue: Coastal GIS

Directory of Open Access Journals (Sweden)

Timothy Nyerges

2014-09-01

Full Text Available This special issue of the ISPRS International Journal of Geographic Information about “Coastal GIS” is motivated by many circumstances. More than one-half of the world’s human population lives in coastal areas (within 200 kilometers of coast as of 2000 [1]. The trend toward coastal habitation is expected to continue in the US with the total being 75 percent by 2025, meaning that coastal human–environment interactions will likely increase and intensify [2]. Geographic information systems (GIS are being developed and used by technical specialists, stakeholder publics, and executive/policy decision makers for improving our understanding and management of coastal areas, separately and together as more organizations focus on improving the sustainability and resilience of coastal systems. Coastal systems—defined as the area of land closely connected to the sea, including barrier islands, wetlands, mudflats, beaches, estuaries, cities, towns, recreational areas, and maritime facilities, the continental seas and shelves, and the overlying atmosphere—are subject to complex and dynamic interactions among natural and human-driven processes. Coastal systems are crucial to regional and national economies, hosting valued human-built infrastructure and providing ecosystem services that sustain human well-being. This special issue of IJGI about coastal GIS presents a collection of nine papers that address many of the issues mentioned above. [...

Programming ArcGIS with Python cookbook

CERN Document Server

Pimpler, Eric

2015-01-01

Programming ArcGIS with Python Cookbook, Second Edition, is written for GIS professionals who wish to revolutionize their ArcGIS workflow with Python. Whether you are new to ArcGIS or a seasoned professional, you almost certainly spend time each day performing various geoprocessing tasks. This book will teach you how to use the Python programming language to automate these geoprocessing tasks and make you a more efficient and effective GIS professional.

Harnessing Geographic Information Systems (GIS) to enable community-oriented primary care.

Science.gov (United States)

Bazemore, Andrew; Phillips, Robert L; Miyoshi, Thomas

2010-01-01

Despite growing acceptance and implementation of geographic information systems (GIS) in the public health arena, its utility for clinical population management and coordination by leaders in a primary care clinical health setting has been neither fully realized nor evaluated. In a primary care network of clinics charged with caring for vulnerable urban communities, we used GIS to (1) integrate and analyze clinical (practice management) data and population (census) data and (2) generate distribution, service area, and population penetration maps of those clinics. We then conducted qualitative evaluation of the responses of primary care clinic leaders, administrators, and community board members to analytic mapping of their clinic and regional population data. Practice management data were extracted, geocoded, and mapped to reveal variation between actual clinical service areas and the medically underserved areas for which these clinics received funding, which was surprising to center leaders. In addition, population penetration analyses were performed to depict patterns of utilization. Qualitative assessments of staff response to the process of mapping clinical and population data revealed enthusiastic engagement in the process, which led to enhanced community comprehension, new ideas about data use, and an array of applications to improve their clinical revenue. However, they also revealed barriers to further adoption, including time, expense, and technical expertise, which could limit the use of GIS and mapping unless economies of scale across clinics, the use of web technology, and the availability of dynamic mapping tools could be realized. Analytic mapping was enthusiastically received and practically applied in the primary care setting, and was readily comprehended by clinic leaders for innovative purposes. This is a tool of particular relevance amid primary care safety-net expansion and increased funding of health information technology diffusion in these

Using multivariate analyses and GIS to identify pollutants and their spatial patterns in urban soils in Galway, Ireland

International Nuclear Information System (INIS)

Zhang Chaosheng

2006-01-01

Galway is a small but rapidly growing tourism city in western Ireland. To evaluate its environmental quality, a total of 166 surface soil samples (0-10 cm depth) were collected from parks and grasslands at the density of 1 sample per 0.25 km 2 at the end of 2004. All samples were analysed using ICP-AES for the near-total concentrations of 26 chemical elements. Multivariate statistics and GIS techniques were applied to classify the elements and to identify elements influenced by human activities. Cluster analysis (Canada) and principal component analysis (PCA) classified the elements into two groups: the first group predominantly derived from natural sources, the second being influenced by human activities. GIS mapping is a powerful tool in identifying the possible sources of pollutants. Relatively high concentrations of Cu, Pb and Zn were found in the city centre, old residential areas, and along major traffic routes, showing significant effects of traffic pollution. The element As is enriched in soils of the old built-up areas, which can be attributed to coal and peat combustion for home heating. Such significant spatial patterns of pollutants displayed by urban soils may imply potential health threat to residents of the contaminated areas of the city. - Multivariate statistics and GIS are useful tools to identify pollutants in urban soils

Design and Implementation of High-Performance GIS Dynamic Objects Rendering Engine

Science.gov (United States)

Zhong, Y.; Wang, S.; Li, R.; Yun, W.; Song, G.

2017-12-01

Spatio-temporal dynamic visualization is more vivid than static visualization. It important to use dynamic visualization techniques to reveal the variation process and trend vividly and comprehensively for the geographical phenomenon. To deal with challenges caused by dynamic visualization of both 2D and 3D spatial dynamic targets, especially for different spatial data types require high-performance GIS dynamic objects rendering engine. The main approach for improving the rendering engine with vast dynamic targets relies on key technologies of high-performance GIS, including memory computing, parallel computing, GPU computing and high-performance algorisms. In this study, high-performance GIS dynamic objects rendering engine is designed and implemented for solving the problem based on hybrid accelerative techniques. The high-performance GIS rendering engine contains GPU computing, OpenGL technology, and high-performance algorism with the advantage of 64-bit memory computing. It processes 2D, 3D dynamic target data efficiently and runs smoothly with vast dynamic target data. The prototype system of high-performance GIS dynamic objects rendering engine is developed based SuperMap GIS iObjects. The experiments are designed for large-scale spatial data visualization, the results showed that the high-performance GIS dynamic objects rendering engine have the advantage of high performance. Rendering two-dimensional and three-dimensional dynamic objects achieve 20 times faster on GPU than on CPU.

Visualizing the application of GIS in transformation towards a sustainable development and a low carbon society

International Nuclear Information System (INIS)

Ahmad, M H; Ariffin, A; Malik, T A

2014-01-01

A strategy for sustainable development is a significant milestone on the road to a more socially, economically and environmentally responsible society. It creates a framework within which the stakeholders can make a strong contribution to a better future. Because of the merits and growing interest in sustainable development, the race is on for researchers and stakeholders in the construction sector to initiate actions to reduce the negative impacts of development and sharpen their competitive edge. The cities should be created with a vision which supports harmonious communities and living conditions through sustainable urban development. The resources must be used efficiently while reducing the development impact on human health and environment during the buildings' life cycle. Environmental auditing and pressure-state response based models to monitor sustainable development in Malaysia should be developed. A data availability and sharing system should be developed and implemented to facilitate for the use in the establishment of sustainable development and low carbon society. Ideas which affect millions of people and guide the policies of nations must be accessible to all. Only thus can they permeate the institutions from the local to the global level. Creating sustainable development and low carbon societies depends on the knowledge and involvement of all stakeholders in the industry. So what is our level of understanding of GIS and its application? The development of geospatial data in Malaysia is important because the successful implementation of sustainable development and low carbon projects depend largely on the availability of geospatial information. It would facilitate the stakeholders and resolve some of the problems regarding the availability, quality, organisation, accessibility and sharing of spatial information. The introduction of GIS may change the way for better sustainable urban development and low carbon society performance. The use of GIS

Visualizing the application of GIS in transformation towards a sustainable development and a low carbon society

Science.gov (United States)

Ahmad, M. H.; Ariffin, A.; Malik, T. A.

2014-02-01

A strategy for sustainable development is a significant milestone on the road to a more socially, economically and environmentally responsible society. It creates a framework within which the stakeholders can make a strong contribution to a better future. Because of the merits and growing interest in sustainable development, the race is on for researchers and stakeholders in the construction sector to initiate actions to reduce the negative impacts of development and sharpen their competitive edge. The cities should be created with a vision which supports harmonious communities and living conditions through sustainable urban development. The resources must be used efficiently while reducing the development impact on human health and environment during the buildings' life cycle. Environmental auditing and pressure-state response based models to monitor sustainable development in Malaysia should be developed. A data availability and sharing system should be developed and implemented to facilitate for the use in the establishment of sustainable development and low carbon society. Ideas which affect millions of people and guide the policies of nations must be accessible to all. Only thus can they permeate the institutions from the local to the global level. Creating sustainable development and low carbon societies depends on the knowledge and involvement of all stakeholders in the industry. So what is our level of understanding of GIS and its application? The development of geospatial data in Malaysia is important because the successful implementation of sustainable development and low carbon projects depend largely on the availability of geospatial information. It would facilitate the stakeholders and resolve some of the problems regarding the availability, quality, organisation, accessibility and sharing of spatial information. The introduction of GIS may change the way for better sustainable urban development and low carbon society performance. The use of GIS is to

Quantum GIS: il desktop GIS più potente, amichevole e libero

Directory of Open Access Journals (Sweden)

Otto Dassau

2009-03-01

Full Text Available QuantumGIS is a free and open source GISIt has an intuitive graphical interface, suitable also for first time GIS users, and thanks to the integration with other free software (e.g. GRASS, PostGIS, GDAL can read dozens of different formats, both raster and vector, link to OGC standard web services (WMS, WFS, SF and run complex analysis and modeling. Many plugins make it easy to extend its functionality. It is used throughout the world, by thousands of users, and its development is fast, with new functions continuously added.

A GIS-based numerical simulation of the March 2014 Oso landslide fluidized motion

Science.gov (United States)

Fukuoka, H.; Ogbonnaya, I.; Wang, C.

2014-12-01

Sliding and flowing are the major movement type after slope failures. Landslides occur when slope-froming material moves downhill after failing along a sliding surface. Most debris flows originally occur in the form of rainfall-induced landslides before they move into valley channel. Landslides that mobilize into debris flows usually are characterized by high-speed movement and long run-out distance and may present the greatest risk to human life. The 22 March 2014 Oso landslide is a typical case of landside transformint to debris flow. The landslide was triggered on the edge of a plateau about 200 m high composed of glacial sediments after excessive prolonged rainfall of 348 in March 2014. After its initiation, portions of the landslide materials transitioned into a rapidly moving debris flow which traveled long distances across the downslope floodplain. U.S. Geological Survey estimated the volume of the slide to be about 7 million m3, and it traveled about 1 km from the toe of the slope. The apparent friction angle measured by the energy line drawn from the crown of the head scarp to the toe of the deposits which reached largest distance, was only 5~6 degrees. we performed two numerical modeling to predicting the runout distance and to get insight into the behaviour of the landslide movement. One is GIS-based revised Hovland's 3D limit equilibrium model which is used to simulate the movement and stoppage of a landslide. In this research, sliding is defined by a slip surface which cuts through the slope, causing the mass of earth to move above it. The factor of safety will be calculated step by step during the sliding process simulation. Stoppage is defined by the factor of safety much greater than one and the velocity equal zero. The other is GIS-based depth-averaged 2D numerical model using a coupled viscous and Coulomb type law to simulate a debris flow from initiation to deposition. We compared our simulaiton results with the results of preliminary computer

The Pan American Health Organization and the mainstreaming of human rights in regional health governance.

Science.gov (United States)

Meier, Benjamin Mason; Ayala, Ana S

2014-01-01

In the absence of centralized human rights leadership in an increasingly fragmented global health policy landscape, regional health offices have stepped forward to advance the rights-based approach to health. Reviewing the efforts of the Pan American Health Organization (PAHO), this article explores the evolution of human rights in PAHO policy, assesses efforts to mainstream human rights in the Pan American Sanitary Bureau (PASB), and analyzes the future of the rights-based approach through regional health governance, providing lessons for other regional health offices and global health institutions. This article explores PAHO's 15-year effort to mainstream human rights through PASB technical units, national capacity-building, the Inter-American human rights system, and the PAHO Directing Council. Through documentary analysis of PAHO policies and semi-structured interviews with key PASB stakeholders, the authors analyze the understandings and actions of policymakers and technical officers in implementing human rights through PAHO governance. Analyzing the themes arising from this narrative, the authors examine the structural role of secretariat leadership, state support, legal expertise, and technical unit commitment in facilitating a rights-based approach to the health in the Americas. Human rights are increasingly framing PAHO efforts, and this analysis of the structures underlying PAHO's approach provides an understanding of the institutional determinants of the rights-based approach to health, highlighting generalizable themes for the mainstreaming of human rights through regional health governance. With this regional-level understanding of health governance, future national-level research can begin to understand the causal forces linking regional human rights work with national policy reforms and public health outcomes. © 2014 American Society of Law, Medicine & Ethics, Inc.

A new GIS-based model for automated extraction of Sand Dune encroachment case study: Dakhla Oases, western desert of Egypt

Directory of Open Access Journals (Sweden)

M. Ghadiry

2012-06-01

Full Text Available The movements of the sand dunes are considered as a threat for roads, irrigation networks, water resources, urban areas, agriculture and infrastructures. The main objectives of this study are to develop a new GIS-based model for automated extraction of sand dune encroachment using remote sensing data and to assess the rate of sand dune movement. To monitor and assess the movements of sand dunes in Dakhla oases area, multi-temporal satellite images and a GIS-developed model, using Python script in Arc GIS, were used. The satellite images (SPOT images, 1995 and 2007 were geo-rectified using Erdas Imagine. Image subtraction was performed using spatial analyst in Arc GIS, the result of image subtraction obtains the sand dune movement between the two dates. The raster and vector shape of sand dune migration was automatically extracted using spatial analyst tools. The frontiers of individual dunes were measured at different dates and movement rates were analyzed in GIS. The ModelBuilder in Arc GIS was used in order to create a user friendly tool. The custom built model window is easy to handle by any user who wishes to adapt the model in his work. It was found that the rate of sand dune movement ranged between 3 and 9 m per year. The majority of sand dunes have a rate movement between 0 and 6 m and very few dunes had a movement rate between 6 and 9 m. Integrating remote sensing and GIS provided the necessary information for determining the minimum, maximum, mean, rate and area of sand dune migration.

Anvendeligheden af GIS

DEFF Research Database (Denmark)

Winstrup, Mie; Levin, Gregor

2011-01-01

Fragmentering af naturen er en trussel mod biodiversiteten, og etablering af økologiske forbindelser/korridorer mellem naturområderne er én måde hvorved nedgangen i biodiversitet kan stoppes. Med Næstved Kommune som case-område har jeg undersøgt, hvordan analyser i GIS kan bruges til at udvælge...... omdannet til reelle korridorer, hvor bredden afhænger af arealdækket som forbindelserne krydser. I implementerings øjemed er det anvendeligt at vide om nogle forbindelser er særlig vigtige for at skabe mere sammenhængende natur. GIS er anvendeligt hertil, idet GIS kan bruges til at bestemme den enkelte...

Trends in GIS: an environmental perspective

International Nuclear Information System (INIS)

Ringrose, S.

1992-01-01

Trends in the Geographic Information System (GIS) have long been difficult to assess comprehensively because of the different perspective of the large number of players in the GIS game. This work represents an overview intended as background to the Workshop Proceedings. As the term GIS means different things to different people the intent is to start with definitions followed by a discussion of data models and inherent functionality of GIS systems. Recent trends are also considered in the context of environmental analyses. Problems arise when considering environmental monitoring due to the paucity of explicit functions dealing with change detection through time. Here parallels are drawn with recent studies which have used the integration of GIS and remotely sensed data. Reasons behind the functional limitations of GIS because apparent as the historical evolution of present day GIS systems is considered, although to some extent these are mitigated by future trends. Finally consideration is given to the role of GIS in assisting with mine site development and especially mine site rehabilitation. 23 refs

GIS/RS-based Rapid Reassessment for Slope Land Capability Classification

Science.gov (United States)

Chang, T. Y.; Chompuchan, C.

2014-12-01

Farmland resources in Taiwan are limited because about 73% is mountainous and slope land. Moreover, the rapid urbanization and dense population resulted in the highly developed flat area. Therefore, the utilization of slope land for agriculture is more needed. In 1976, "Slope Land Conservation and Utilization Act" was promulgated to regulate the slope land utilization. Consequently, slope land capability was categorized into Class I-IV according to 4 criteria, i.e., average land slope, effective soil depth, degree of soil erosion, and parent rock. The slope land capability Class I-VI are suitable for cultivation and pasture. Whereas, Class V should be used for forestry purpose and Class VI should be the conservation land which requires intensive conservation practices. The field survey was conducted to categorize each land unit as the classification scheme. The landowners may not allow to overuse land capability limitation. In the last decade, typhoons and landslides frequently devastated in Taiwan. The rapid post-disaster reassessment of the slope land capability classification is necessary. However, the large-scale disaster on slope land is the constraint of field investigation. This study focused on using satellite remote sensing and GIS as the rapid re-evaluation method. Chenyulan watershed in Nantou County, Taiwan was selected to be a case study area. Grid-based slope derivation, topographic wetness index (TWI) and USLE soil loss calculation were used to classify slope land capability. The results showed that GIS-based classification give an overall accuracy of 68.32%. In addition, the post-disaster areas of Typhoon Morakot in 2009, which interpreted by SPOT satellite imageries, were suggested to classify as the conservation lands. These tools perform better in the large coverage post-disaster update for slope land capability classification and reduce time-consuming, manpower and material resources to the field investigation.

GIS-based poverty and population distribution analysis in China

Science.gov (United States)

Cui, Jing; Wang, Yingjie; Yan, Hong

2009-07-01

Geographically, poverty status is not only related with social-economic factors but also strongly affected by geographical environment. In the paper, GIS-based poverty and population distribution analysis method is introduced for revealing their regional differences. More than 100000 poor villages and 592 national key poor counties are chosen for the analysis. The results show that poverty distribution tends to concentrate in most of west China and mountainous rural areas of mid China. Furthermore, the fifth census data are overlaid to those poor areas in order to gain its internal diversity of social-economic characteristics. By overlaying poverty related social-economic parameters, such as sex ratio, illiteracy, education level, percentage of ethnic minorities, family composition, finding shows that poverty distribution is strongly correlated with high illiteracy rate, high percentage minorities, and larger family member.

The Architecture of a Complex GIS & Spreadsheet Based DSS

Directory of Open Access Journals (Sweden)

Dinu Airinei

2010-01-01

Full Text Available The decision support applications available on today market use to combine the decision analysis of historical databased on On-Line Analytical Processing (OLAP products or spreadsheet pivot tables with some new reporting facilities as alerts or key performance indicators available in portal dashboards or in complex spreadsheet-like reports, both corresponding to a new approach of the field called Business Intelligence. Moreover the geographical features of GIS added to DSS applications become more and more required by many kinds of businesses. In fact they are more useful this way than as distinctive parts.The paper tries to present a certain DSS architecture based on the association between such approaches and technologies. The particular examples are meant to support all the theoretical arguments and to complete the understanding of the interaction schemas available.

Using Multi-criteria Evaluation and GIS for Flood Risk Analysis in ...

African Journals Online (AJOL)

New Win User

were then mapped in the GIS to show the spatial disparities in risk. ..... Ayalew, L. & Yamagishi, H 2005, 'The application of GIS-based logistic regression for landslide .... Saaty, TL 1980, The analytic hierarchy process, Mcgraw-Hill, New York.

The Project-Approach to GIS as an Integrative Classroom Technology: An Environmental Case Study.

Science.gov (United States)

Gatrell, Jay D.; Oshiro, Kenji K.

2001-01-01

Explains how Geographic Information Systems (GIS) influences geography curricula and how project-based learning can be applied to GIS experiences. Introduces a project investigating non-geography college students' design and implementation of a environmental GIS application. (Contains 16 references.) (YDS)

Più turismo con il GIS

Directory of Open Access Journals (Sweden)

Erminio Paolo Canavese

2015-02-01

Full Text Available In questa case history Virtualgeo presenta la sua soluzione per diffondere l’uso delle nuove tecnologie geomatiche a supporto del turismo grazie a un WebGIS ricco di funzionalità. La realizzazione di un percorso turistico digitale auspica di fornire possibili suggerimenti all’interno del processo di adeguamento tecnologico perseguito dalle municipalità.In this case study Virtualgeo presents its solution to spread the use of new geomatics technologies to support tourism through a webGIS that is rich of features. The creation of a tourist route through digital technology-based processing tools hopes to provide possible suggestions in the process of technological updating pursued by the municipalities of Eastern Venice, providing those simple solutions that become more and more "necessary" in an era constructed through the network. The created webGIS is a tourist product that is useful for the institutions directly concerned with the promotion of the territory; for the "natives", i.e. the citizens who often know little the area where they live, and for the eco-tourists visiting this wonderful land. The webGIS should not be neglected as an extraordinary tool of knowledge of the area (cultural heritage, landscape, environment for teaching in schools of all levels.

Più turismo con il GIS

Directory of Open Access Journals (Sweden)

Erminio Paolo Canavese

2015-02-01

Full Text Available In questa case history Virtualgeo presenta la sua soluzione per diffondere l’uso delle nuove tecnologie geomatiche a supporto del turismo grazie a un WebGIS ricco di funzionalità. La realizzazione di un percorso turistico digitale auspica di fornire possibili suggerimenti all’interno del processo di adeguamento tecnologico perseguito dalle municipalità. In this case study Virtualgeo presents its solution to spread the use of new geomatics technologies to support tourism through a webGIS that is rich of features. The creation of a tourist route through digital technology-based processing tools hopes to provide possible suggestions in the process of technological updating pursued by the municipalities of Eastern Venice, providing those simple solutions that become more and more "necessary" in an era constructed through the network. The created webGIS is a tourist product that is useful for the institutions directly concerned with the promotion of the territory; for the "natives", i.e. the citizens who often know little the area where they live, and for the eco-tourists visiting this wonderful land. The webGIS should not be neglected as an extraordinary tool of knowledge of the area (cultural heritage, landscape, environment for teaching in schools of all levels.

GIS for public health : A study of Andhra Pradesh

Science.gov (United States)

Shrinagesh, B.; Kalpana, Markandey; Kiran, Baktula

2014-06-01

Geographic information systems and remote sensing have capabilities that are ideally suited for use in infectious disease surveillance and control, particularly for the many vector-borne neglected diseases that are often found in poor populations in remote rural areas. They are also highly relevant to meet the demands of outbreak investigation and response, where prompt location of cases, rapid communication of information, and quick mapping of the epidemic's dynamics are vital. The situation has changed dramatically over the past few years. GIS helps in determining geographic distribution of diseases, analysing spatial and temporal trends, Mapping populations at risk, Stratifying risk factors, Assessing resource allocation, Planning and targeting interventions, Monitoring diseases and interventions over time. There are vast disparities in people's health even among the different districts across the state of Andhra Pradesh largely attributed to the resource allocation by the state government. Despite having centers of excellence in healthcare delivery, these facilities are limited and are inadequate in meeting the current healthcare demands. The main objectives are to study the prevalent diseases in Andhra Pradesh, to study the infrastructural facilities available in A.P. The methodology includes the Spatial Database, which will be mostly in the form of digitized format. The Non-Spatial Database includes both secondary data as well as the primary data.

From BIM to GIS at the Smithsonian Institution

Science.gov (United States)

Günther-Diringer, Detlef

2018-05-01

BIM-files (Building Information Models) are in modern architecture and building management a basic prerequisite for successful creation of construction engineering projects. At the facilities department of the Smithsonian Institution more than six hundred buildings were maintained. All facilities were digital available in an ESRI ArcGIS-environment with connection to the database information about single rooms with the usage and further maintenance information. These data are organization wide available by an intranet viewer, but only in a two-dimensional representation. Goal of the carried out project was the development of a workflow from available BIM-models to the given GIS-structure. The test-environment were the BIM-models of the buildings of the Smithsonian museums along the Washington Mall. Based on new software editions of Autodesk Revit, FME and ArcGIS Pro the workflow from BIM to the GIS-data structure of the Smithsonian was successfully developed and may be applied for the setup of the future 3D intranet viewer.

Comparing GIS-based habitat models for applications in EIA and SEA

International Nuclear Information System (INIS)

Gontier, Mikael; Moertberg, Ulla; Balfors, Berit

2010-01-01

Land use changes, urbanisation and infrastructure developments in particular, cause fragmentation of natural habitats and threaten biodiversity. Tools and measures must be adapted to assess and remedy the potential effects on biodiversity caused by human activities and developments. Within physical planning, environmental impact assessment (EIA) and strategic environmental assessment (SEA) play important roles in the prediction and assessment of biodiversity-related impacts from planned developments. However, adapted prediction tools to forecast and quantify potential impacts on biodiversity components are lacking. This study tested and compared four different GIS-based habitat models and assessed their relevance for applications in environmental assessment. The models were implemented in the Stockholm region in central Sweden and applied to data on the crested tit (Parus cristatus), a sedentary bird species of coniferous forest. All four models performed well and allowed the distribution of suitable habitats for the crested tit in the Stockholm region to be predicted. The models were also used to predict and quantify habitat loss for two regional development scenarios. The study highlighted the importance of model selection in impact prediction. Criteria that are relevant for the choice of model for predicting impacts on biodiversity were identified and discussed. Finally, the importance of environmental assessment for the preservation of biodiversity within the general frame of biodiversity conservation is emphasised.

Ecological determinants of health: food and environment on human health.

Science.gov (United States)

Li, Alice M L

2017-04-01

Human health and diseases are determined by many complex factors. Health threats from the human-animal-ecosystems interface (HAEI) and zoonotic diseases (zoonoses) impose an increasing risk continuously to public health, from those emerging pathogens transmitted through contact with animals, food, water and contaminated environments. Immense challenges forced on the ecological perspectives on food and the eco-environments, including aquaculture, agriculture and the entire food systems. Impacts of food and eco-environments on human health will be examined amongst the importance of human interventions for intended purposes in lowering the adverse effects on the biodiversity. The complexity of relevant conditions defined as factors contributing to the ecological determinants of health will be illuminated from different perspectives based on concepts, citations, examples and models, in conjunction with harmful consequential effects of human-induced disturbances to our environments and food systems, together with the burdens from ecosystem disruption, environmental hazards and loss of ecosystem functions. The eco-health literacy should be further promoting under the "One Health" vision, with "One World" concept under Ecological Public Health Model for sustaining our environments and the planet earth for all beings, which is coincidentally echoing Confucian's theory for the environmental ethics of ecological harmony.

GIS-based biomass resource utilization for rice straw cofiring in the Taiwanese power market

International Nuclear Information System (INIS)

Hu, Ming-Che; Huang, An-Lei; Wen, Tzai-Hung

2013-01-01

Rice straw, a rich agricultural byproduct in Taiwan, can be used as biomass feedstock for cofiring systems. In this study, we analyzed the penetration of rice straw cofiring systems in the Taiwanese power market. In the power generation system, rice straw is cofired with fossil fuel in existing electricity plants. The benefits of cofiring systems include increasing the use of renewable energy, decreasing the fuel cost, and lowering greenhouse gas emissions. We established a linear complementarity model to simulate the power market equilibrium with cofiring systems in Taiwan. GIS-based analysis was then used to analyze the geospatial relationships between paddy rice farms and power plants to assess potential biomass for straw-power generation. Additionally, a sensitivity analysis of the biomass feedstock supply system was conducted for various cofiring scenarios. The spatial maps and equilibrium results of rice straw cofiring in Taiwanese power market are presented in the paper. - Highlights: ► The penetration of straw cofiring systems in the power market is analyzed. ► GIS-based analysis assesses potential straw-power generation. ► The spatial maps and equilibrium results of rice straw cofiring are presented

SAGA GIS based processing of spatial high resolution temperature data

International Nuclear Information System (INIS)

Gerlitz, Lars; Bechtel, Benjamin; Kawohl, Tobias; Boehner, Juergen; Zaksek, Klemen

2013-01-01

Many climate change impact studies require surface and near surface temperature data with high spatial and temporal resolution. The resolution of state of the art climate models and remote sensing data is often by far to coarse to represent the meso- and microscale distinctions of temperatures. This is particularly the case for regions with a huge variability of topoclimates, such as mountainous or urban areas. Statistical downscaling techniques are promising methods to refine gridded temperature data with limited spatial resolution, particularly due to their low demand for computer capacity. This paper presents two downscaling approaches - one for climate model output and one for remote sensing data. Both are methodically based on the FOSS-GIS platform SAGA. (orig.)

Managing the GPS/GIS function in an electric utility

International Nuclear Information System (INIS)

Michelsen, M.W. Jr.

1999-01-01

A new period of higher significance has arrived for the GPS/GIS function at electric utilities such that to a degree never seen before, utility managers are looking to their GIS programs, filled with increasingly accurate data collected by GPS technology, before making many decisions. With this capability comes an expectation for GPS/GIS professionals to provide higher levels of planning and management of their data collection process. At Duke Power in Charlotte, North Carolina, managers rely on GPS mapping to fill their data collection equipment needs. When the city of Charlotte requested a more detailed billing system, Duke Power co-sponsored the street lighting inventory project, a comprehensive program implemented to fully account for street lighting facilities within the billing area. One of the key projects to be kept in mind was the creation of a common data base viewable by GIS from which a bill could be created and as well reveal data. A billing calculation routine can be run against the data base to generate a bill or use MapInfo to see a graphical picture. Prior to the creation of this data base capability, the difference between the data base as a display tool and billing system was a potential source of discrepancy, which is eliminated now. Creating the data base allows more than just creating a bill for the city, it allows Duke Power to work better with the city by improving its billing accountability and provides better service as well

Lost in the Cloud - New Challenges for Teaching GIS

Science.gov (United States)

Bellman, C. J.; Pupedis, G.

2016-06-01

As cloud based services move towards becoming the dominant paradigm in many areas of information technology, GIS has also moved into `the Cloud', creating a new opportunities for professionals and students alike, while at the same time presenting a range of new challenges and opportunities for GIS educators. Learning for many students in the geospatial science disciplines has been based on desktop software for GIS, building their skills from basic data handling and manipulation to advanced spatial analysis and database storage. Cloud-based systems challenge this paradigm in many ways, with some of the skills being replaced by clever and capable software tools, while the ubiquitous nature of the computing environment offers access and processing from anywhere, on any device. This paper describes our experiences over the past two years in developing and delivering a new course incorporating cloud based technologies for GIS and illustrates the many benefits and pitfalls of a cloud based approach to teaching. Throughout the course, students were encouraged to provide regular feedback on the course through the use of online journals. This allowed students to critique the approach to teaching, the learning materials available and to describe their own level of comfort and engagement with the material in an honest and non-confrontational manner. Many of the students did not have a strong information technology background and the journals provided great insight into the views of the students and the challenges they faced in mastering this technology.

A GIS-based methodology for the estimation of potential volcanic damage and its application to Tenerife Island, Spain

Science.gov (United States)

Scaini, C.; Felpeto, A.; Martí, J.; Carniel, R.

2014-05-01

This paper presents a GIS-based methodology to estimate damages produced by volcanic eruptions. The methodology is constituted by four parts: definition and simulation of eruptive scenarios, exposure analysis, vulnerability assessment and estimation of expected damages. Multi-hazard eruptive scenarios are defined for the Teide-Pico Viejo active volcanic complex, and simulated through the VORIS tool. The exposure analysis identifies the elements exposed to the hazard at stake and focuses on the relevant assets for the study area. The vulnerability analysis is based on previous studies on the built environment and complemented with the analysis of transportation and urban infrastructures. Damage assessment is performed associating a qualitative damage rating to each combination of hazard and vulnerability. This operation consists in a GIS-based overlap, performed for each hazardous phenomenon considered and for each element. The methodology is then automated into a GIS-based tool using an ArcGIS® program. Given the eruptive scenarios and the characteristics of the exposed elements, the tool produces expected damage maps. The tool is applied to the Icod Valley (North of Tenerife Island) which is likely to be affected by volcanic phenomena in case of eruption from both the Teide-Pico Viejo volcanic complex and North-West basaltic rift. Results are thematic maps of vulnerability and damage that can be displayed at different levels of detail, depending on the user preferences. The aim of the tool is to facilitate territorial planning and risk management in active volcanic areas.

GIS Based Distributed Runoff Predictions in Variable Source Area Watersheds Employing the SCS-Curve Number

Science.gov (United States)

Steenhuis, T. S.; Mendoza, G.; Lyon, S. W.; Gerard Marchant, P.; Walter, M. T.; Schneiderman, E.

2003-04-01

Because the traditional Soil Conservation Service Curve Number (SCS-CN) approach continues to be ubiquitously used in GIS-BASED water quality models, new application methods are needed that are consistent with variable source area (VSA) hydrological processes in the landscape. We developed within an integrated GIS modeling environment a distributed approach for applying the traditional SCS-CN equation to watersheds where VSA hydrology is a dominant process. Spatial representation of hydrologic processes is important for watershed planning because restricting potentially polluting activities from runoff source areas is fundamental to controlling non-point source pollution. The methodology presented here uses the traditional SCS-CN method to predict runoff volume and spatial extent of saturated areas and uses a topographic index to distribute runoff source areas through watersheds. The resulting distributed CN-VSA method was incorporated in an existing GWLF water quality model and applied to sub-watersheds of the Delaware basin in the Catskill Mountains region of New York State. We found that the distributed CN-VSA approach provided a physically-based method that gives realistic results for watersheds with VSA hydrology.

CoC GIS Tools (GIS Tool)

Data.gov (United States)

Department of Housing and Urban Development — This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through...

Applications of GIS for the cadaster of dumpsites and the dumpsites evaluation

Directory of Open Access Journals (Sweden)

Igor Šebenik

1992-12-01

necessaru for qualitative remediation programes. There's no documentation data, they are usually lost and only contradictorg oral data are accessable. Technology of GIS seems to be very convenient for dumpsites data managing. The 'dumpsites lager' has to be fully used in environmental GIS. Well developed atribute data base and maps in scale 1:5000 or 1:1OOOO are a good base for a lager construction. A pilot GIS with this data was developed for water protection area of spring Rižana in year 1991. This year an application for data retrieval was developed for the needs of Mininstry for environmental protection and physical planning. Next step in establishing of system for dumpsites monitoring is a development of an expert sgstem for the prioritisation of hazards dumpsites cause, based on the data collected in GIS.

Application of GIS Rapid Mapping Technology in Disaster Monitoring

Science.gov (United States)

Wang, Z.; Tu, J.; Liu, G.; Zhao, Q.

2018-04-01

With the rapid development of GIS and RS technology, especially in recent years, GIS technology and its software functions have been increasingly mature and enhanced. And with the rapid development of mathematical statistical tools for spatial modeling and simulation, has promoted the widespread application and popularization of quantization in the field of geology. Based on the investigation of field disaster and the construction of spatial database, this paper uses remote sensing image, DEM and GIS technology to obtain the data information of disaster vulnerability analysis, and makes use of the information model to carry out disaster risk assessment mapping.Using ArcGIS software and its spatial data modeling method, the basic data information of the disaster risk mapping process was acquired and processed, and the spatial data simulation tool was used to map the disaster rapidly.

An open source GIS-based tool to integrate the fragmentation mechanism in rockfall propagation

Science.gov (United States)

Matas, Gerard; Lantada, Nieves; Gili, Josep A.; Corominas, Jordi

2015-04-01

Rockfalls are frequent instability processes in road cuts, open pit mines and quarries, steep slopes and cliffs. Even though the stability of rock slopes can be determined using analytical approaches, the assessment of large rock cliffs require simplifying assumptions due to the difficulty of working with a large amount of joints, the scattering of both the orientations and strength parameters. The attitude and persistency of joints within the rock mass define the size of kinematically unstable rock volumes. Furthermore the rock block will eventually split in several fragments during its propagation downhill due its impact with the ground surface. Knowledge of the size, energy, trajectory… of each block resulting from fragmentation is critical in determining the vulnerability of buildings and protection structures. The objective of this contribution is to present a simple and open source tool to simulate the fragmentation mechanism in rockfall propagation models and in the calculation of impact energies. This tool includes common modes of motion for falling boulders based on the previous literature. The final tool is being implemented in a GIS (Geographic Information Systems) using open source Python programming. The tool under development will be simple, modular, compatible with any GIS environment, open source, able to model rockfalls phenomena correctly. It could be used in any area susceptible to rockfalls with a previous adjustment of the parameters. After the adjustment of the model parameters to a given area, a simulation could be performed to obtain maps of kinetic energy, frequency, stopping density and passing heights. This GIS-based tool and the analysis of the fragmentation laws using data collected from recent rockfall have being developed within the RockRisk Project (2014-2016). This project is funded by the Spanish Ministerio de Economía y Competitividad and entitled "Rockfalls in cliffs: risk quantification and its prevention"(BIA2013-42582-P).

Research of Ancient Architectures in Jin-Fen Area Based on GIS and BIM Technology

International Nuclear Information System (INIS)

Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

2017-01-01

The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation and restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching and collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS and BIM technology, could be constructed to support

DSS and GIS in Knowledge Transformation Process

Directory of Open Access Journals (Sweden)

Klimešová Dana

2009-06-01

Full Text Available Knowledge is an important resource for successful decision-making process in the whole society today. The special procedures of control and management of knowledge therefore have to be used. In the area of knowledge management and knowledge engineering basic terms of these disciplines are data, information, knowledge and knowledge transformation. The knowledge can be defined as a dynamic human process of justifying personal beliefs. Knowledge is a product of successful decision-making process. Knowledge transformation is a spiralling process of interactions between explicit and tacit knowledge that leads to the new knowledge. Nonaka and all show, that the combination of these two categories makes possible to conceptualise four conversion steps: Socialisation, Externalisation, Combination and Internalisation (SECI model. Another model of knowledge creation is the Knowledge Transformation Continuum (BCI Knowledge Group that begins with the articulation of a specific instruction representing the best way that a specific task, or series of tasks, should be performed. Knowledge modelling and knowledge representation is an important field of research also in Computer Science and Artificial Intelligence. The definition of knowledge in Artificial Intelligence is a noticeable different, because Artificial Intelligence is typically dealing with formalized knowledge (e.g. ontology. The development of knowledge-based systems was seen as a process of transferring human knowledge to an implemented knowledge base. Decision Support Systems (DSS, Geographical Information Systems (GIS and Operations Research/Management Science (OR/MS modelling process support decision-making process, therefore they also produce a new knowledge. A Decision Support Systems are an interactive computer-based systems helping decision makers complete decision process. Geographic Information Systems provide essential marketing and customer intelligence solutions that lead to better

A GIS-based framework for evaluating investments in fire management: Spatial allocation of recreation values

Science.gov (United States)

Kenneth A. Baerenklau; Armando González-Cabán; Catrina I. Páez; Edgard Chávez

2009-01-01

The U.S. Forest Service is responsible for developing tools to facilitate effective and efficient fire management on wildlands and urban-wildland interfaces. Existing GIS-based fire modeling software only permits estimation of the costs of fire prevention and mitigation efforts as well as the effects of those efforts on fire behavior. This research demonstrates how the...

Regional planning and modelling of nitrate leaching in Denmark using DaisyGIS

DEFF Research Database (Denmark)

Veihe, Anita; Jensen, Niels H.; Boegh, Eva

Spatial deterministic simulation models such as DaisyGIS are increasingly being used for decision-making in European planning and there is a growing interest in using DaisyGIS as an administrative tool at the regional level in Denmark. This study evaluates the use of Daisy-GIS for nitrate leaching...... assessments based on nitrate leaching experiments carried out at the Marbjerg experimental site at Roskilde University....

The Coastal Area Development Using GIS (Review of GIS Application Models

Directory of Open Access Journals (Sweden)

Prastowo Sutanto

2004-01-01

Full Text Available GIS, Geographical Information System, is a means that an be used to plan and to develop the coastal area because in carrying out the analysis this system combines the space data and their  attributes. The activities done among others the prototype development of algae cultivation and tourism ativities, the development of fish pond location, the reclamation of the Jakarta Bay, and the concept of development the floating “Keramba” for pearl oysters and white sea fish similar to sole. GIS analysis with heaviness and overlay mapping yields the appropriate map to plan and to develop the coastal area. The result of GIS analysis can be used to plan and to develop the coastal area.

The portable GIS applied to geotechnical inspections; O GIS portatil para inspecoes geotecnicas

Energy Technology Data Exchange (ETDEWEB)

Rabaco, Lis M.; Lins, Alexandre F. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Costa, Rogerio M.; Freitas, Carlos F. [CONCREMAT, Rio de Janeiro, RJ (Brazil)

2005-07-01

The purpose of this paper is to implement an interface using tool to pack the GIS application to carry out a field inspection. The solution was implemented on pocket equipment using a simplified map and database integrated with the GIS Corporative. The main objective is to avoid paper work in field inspections. The emphases are on geotechnical inspections in order to assist the recuperation of information about points with geotechnical risk. There are interfaces with external device as GPS for insertion of points of risk. A set of tools are developed for bidirectional synchronization among the Corporative GIS and the pocket devices. The project focused geotechnical inspections on field, in order to synchronize automatically the information collected with the pocket GIS application with a Web server, packing all information from field operation to managers. (author)

On-line applications of numerical models in the Black Sea GIS

Science.gov (United States)

Zhuk, E.; Khaliulin, A.; Zodiatis, G.; Nikolaidis, A.; Nikolaidis, M.; Stylianou, Stavros

2017-09-01

The Black Sea Geographical Information System (GIS) is developed based on cutting edge information technologies, and provides automated data processing and visualization on-line. Mapserver is used as a mapping service; the data are stored in MySQL DBMS; PHP and Python modules are utilized for data access, processing, and exchange. New numerical models can be incorporated in the GIS environment as individual software modules, compiled for a server-based operational system, providing interaction with the GIS. A common interface allows setting the input parameters; then the model performs the calculation of the output data in specifically predefined files and format. The calculation results are then passed to the GIS for visualization. Initially, a test scenario of integration of a numerical model into the GIS was performed, using software, developed to describe a two-dimensional tsunami propagation in variable basin depth, based on a linear long surface wave model which is legitimate for more than 5 m depth. Furthermore, the well established oil spill and trajectory 3-D model MEDSLIK (http://www.oceanography.ucy.ac.cy/medslik/) was integrated into the GIS with more advanced GIS functionality and capabilities. MEDSLIK is able to forecast and hind cast the trajectories of oil pollution and floating objects, by using meteo-ocean data and the state of oil spill. The MEDSLIK module interface allows a user to enter all the necessary oil spill parameters, i.e. date and time, rate of spill or spill volume, forecasting time, coordinates, oil spill type, currents, wind, and waves, as well as the specification of the output parameters. The entered data are passed on to MEDSLIK; then the oil pollution characteristics are calculated for pre-defined time steps. The results of the forecast or hind cast are then visualized upon a map.

GIS Based System for Post-Earthquake Crisis Managment Using Cellular Network

Science.gov (United States)

Raeesi, M.; Sadeghi-Niaraki, A.

2013-09-01

Earthquakes are among the most destructive natural disasters. Earthquakes happen mainly near the edges of tectonic plates, but they may happen just about anywhere. Earthquakes cannot be predicted. Quick response after disasters, like earthquake, decreases loss of life and costs. Massive earthquakes often cause structures to collapse, trapping victims under dense rubble for long periods of time. After the earthquake and destroyed some areas, several teams are sent to find the location of the destroyed areas. The search and rescue phase usually is maintained for many days. Time reduction for surviving people is very important. A Geographical Information System (GIS) can be used for decreasing response time and management in critical situations. Position estimation in short period of time time is important. This paper proposes a GIS based system for post-earthquake disaster management solution. This system relies on several mobile positioning methods such as cell-ID and TA method, signal strength method, angel of arrival method, time of arrival method and time difference of arrival method. For quick positioning, the system can be helped by any person who has a mobile device. After positioning and specifying the critical points, the points are sent to a central site for managing the procedure of quick response for helping. This solution establishes a quick way to manage the post-earthquake crisis.

GIS BASED SYSTEM FOR POST-EARTHQUAKE CRISIS MANAGMENT USING CELLULAR NETWORK

Directory of Open Access Journals (Sweden)

M. Raeesi

2013-09-01

Full Text Available Earthquakes are among the most destructive natural disasters. Earthquakes happen mainly near the edges of tectonic plates, but they may happen just about anywhere. Earthquakes cannot be predicted. Quick response after disasters, like earthquake, decreases loss of life and costs. Massive earthquakes often cause structures to collapse, trapping victims under dense rubble for long periods of time. After the earthquake and destroyed some areas, several teams are sent to find the location of the destroyed areas. The search and rescue phase usually is maintained for many days. Time reduction for surviving people is very important. A Geographical Information System (GIS can be used for decreasing response time and management in critical situations. Position estimation in short period of time time is important. This paper proposes a GIS based system for post–earthquake disaster management solution. This system relies on several mobile positioning methods such as cell-ID and TA method, signal strength method, angel of arrival method, time of arrival method and time difference of arrival method. For quick positioning, the system can be helped by any person who has a mobile device. After positioning and specifying the critical points, the points are sent to a central site for managing the procedure of quick response for helping. This solution establishes a quick way to manage the post–earthquake crisis.

A health risk assessment for fluoride in Central Europe.

Science.gov (United States)

Fordyce, F M; Vrana, K; Zhovinsky, E; Povoroznuk, V; Toth, G; Hope, B C; Iljinsky, U; Baker, J

2007-04-01

Like many elements, fluorine (which generally occurs in nature as fluoride) is beneficial to human health in trace amounts, but can be toxic in excess. The links between low intakes of fluoride and dental protection are well known; however, fluoride is a powerful calcium-seeking element and can interfere with the calcified structure of bones and teeth in the human body at higher concentrations causing dental or skeletal fluorosis. One of the main exposure routes is via drinking water and the World Health Organisation currently sets water quality guidelines for the element. In Central Europe, groundwater resources that exceed the guideline value of 1.5 mg l-1 are widespread and effects on health of high fluoride in water have been reported. The aim of the current project was to develop a geographic information system (GIS) to aid the identification of areas where high-fluoride waters and fluorosis may be a problem; hence, where water treatment technologies should be targeted. The development of the GIS was based upon the collation and digitisation of existing information relevant to fluoride risk in Ukraine, Moldova, Hungary and Slovakia assembled for the first time in a readily accessible form. In addition, geochemistry and health studies to examine in more detail the relationships between high-fluoride drinking waters and health effects in the population were carried out in Moldova and Ukraine demonstrating dental fluorosis prevalence rates of 60-90% in adolescents consuming water containing 2-7 mg l-1 fluoride.

GIS TECHNOLOGY AND TERRAIN ORTHOPHOTOMAP MAKING FOR MILITARY APPLICATION

Directory of Open Access Journals (Sweden)

Elshan Hashimov

2017-11-01

Full Text Available In this paper, it is shown that GIS and photogrammetry technologiyes, determination of searching target coordinates for the operational desicion making are very important for the military application, for the combat control. With aim of orthophotomap making of the terrain and identification of terrain supervision there has been constructed 3D model for choosen mountainous terrain of Azerbaijan Republic using GIS technology. Based on this model there has been obtained a terrain profile and carried out mapping. Using ArcGis software there has been investigated possibility remain control on obserbvable and unobservable parties of terrain on supervision line from supervision point to target point.

In vitro dissolution methodology, mini-Gastrointestinal Simulator (mGIS), predicts better in vivo dissolution of a weak base drug, dasatinib.

Science.gov (United States)

Tsume, Yasuhiro; Takeuchi, Susumu; Matsui, Kazuki; Amidon, Gregory E; Amidon, Gordon L

2015-08-30

USP apparatus I and II are gold standard methodologies for determining the in vitro dissolution profiles of test drugs. However, it is difficult to use in vitro dissolution results to predict in vivo dissolution, particularly the pH-dependent solubility of weak acid and base drugs, because the USP apparatus contains one vessel with a fixed pH for the test drug, limiting insight into in vivo drug dissolution of weak acid and weak base drugs. This discrepancy underscores the need to develop new in vitro dissolution methodology that better predicts in vivo response to assure the therapeutic efficacy and safety of oral drug products. Thus, the development of the in vivo predictive dissolution (IPD) methodology is necessitated. The major goals of in vitro dissolution are to ensure the performance of oral drug products and the support of drug formulation design, including bioequivalence (BE). Orally administered anticancer drugs, such as dasatinib and erlotinib (tyrosine kinase inhibitors), are used to treat various types of cancer. These drugs are weak bases that exhibit pH-dependent and high solubility in the acidic stomach and low solubility in the small intestine (>pH 6.0). Therefore, these drugs supersaturate and/or precipitate when they move from the stomach to the small intestine. Also of importance, gastric acidity for cancer patients may be altered with aging (reduction of gastric fluid secretion) and/or co-administration of acid-reducing agents. These may result in changes to the dissolution profiles of weak base and the reduction of drug absorption and efficacy. In vitro dissolution methodologies that assess the impact of these physiological changes in the GI condition are expected to better predict in vivo dissolution of oral medications for patients and, hence, better assess efficacy, toxicity and safety concerns. The objective of this present study is to determine the initial conditions for a mini-Gastrointestinal Simulator (mGIS) to assess in vivo

A GIS based approach for the prediction of the dam break flood hazard – A case study of Zardezas reservoir “Skikda, Algeria”

Directory of Open Access Journals (Sweden)

Derdous Oussama

2015-12-01

Full Text Available The construction of dams in rivers can offer many advantages, however the consequences resulting from their failure could result in major damage, including loss of life and property destruction. To mitigate the threats of dam break it is essential to appreciate the characteristics of the potential flood in realistic manner. In this study an approach based on the integration of hydraulic modelling and GIS has been used to assess the risks resulting from a potential failure of Zardezas dam, a concrete dam located in Skikda, in the North East of Algeria. HEC-GeoRAS within GIS was used to extract geometric information from a digital elevation model and then imported into HEC-RAS. Flow simulation of the dam break was performed using HEC-RAS and results were mapped using the GIS. Finally, a flood hazard map based on water depth and flow velocity maps was created in GIS environment. According to this map the potential failure of Zardezas dam will place a large number in people in danger. The present study has shown that Application of Geographical Information System (GIS techniques in integration with hydraulic modelling can significantly reduce the time and the resources required to forecast potential dam break flood hazard which can play a crucial role in improving both flood disaster management and land use planning downstream of dams.

Improved GIS-based Methods for Traffic Noise Impact Assessment

DEFF Research Database (Denmark)

Nielsen, Otto Anker; Bloch, Karsten Sand

1996-01-01

When vector-based GIS-packages are used for traffic noise impact assessments, the buffer-technique is usually employed for the study: 1. For each road segment buffer-zones representing different noise-intervals are generated, 2. The buffers from all road segments are smoothed together, and 3....... The number of buildings within the buffers are enumerated. This technique provides an inaccurate assessment of the noise diffusion since it does not correct for buildings barrier and reflection to noise. The paper presents the results from a research project where the traditional noise buffer technique...... was compared with a new method which includes these corrections. Both methods follow the Common Nordic Noise Calculation Model, although the traditional buffer technique ignores parts of the model. The basis for the work was a digital map of roads and building polygons, combined with a traffic- and road...

Using Geographical Information Systems (GIS) as an instrument of water resource management: a case study from a GIS-based Water Safety Plan in Germany.

Science.gov (United States)

Wienand, I; Nolting, U; Kistemann, T

2009-01-01

Following international developments and the new WHO Drinking Water Guidelines (WHO 2004) a process-orientated concept for risk, monitoring and incident management has been developed and implemented in this study. The concept will be reviewed with special consideration for resource protection (first barrier of the multi-barrier system) and in turn, for the Water Safety Plan (WSP) which adequately considers-beyond the current framework of legal requirements-possible new hygienic-microbiologically relevant risks (especially emerging pathogens) for the drinking water supply. The development of a WSP within the framework of risk, monitoring and incident management includes the application of Geographical Information Systems (GIS). In the present study, GIS was used for visualization and spatial analysis in decisive steps in the WSP. The detailed process of GIS-supported implementation included the identification of local participants and their tasks and interactions as an essential part of risk management. A detailed ecological investigation of drinking water conditions in the catchment area was conducted in addition to hazard identification, risk assessment and the monitoring of control measures. The main task of our study was to find out in which steps of the WSP the implementation of GIS could be integrated as a useful, and perhaps even an essential tool.

Development of web-based GIS services for sustainable soil resource management at farm level

Science.gov (United States)

Papadopoulos, Antonis; Kolovos, Chronis; Troyanos, Yerasimos; Doula, Maria

2017-09-01

Modern farms situated in urban or suburban areas, include various and in most cases diverse land covers. Land uses in such farms may serve residential, structured, aesthetic and agricultural purposes, usually delimited inside the boundaries of a single property. The environmental conditions across a farm, especially if it is situated on an irregular terrain, can be highly differentiated. Managing soil resources in a small scale diverse farm environment in a holistic and sustainable way should have spatial and temporal reference and take advantage of cut-edge geospatial technologies. In present study, an 8 hectare farm with various land uses in the southern suburbs of Attica Prefecture, Greece was systematically monitored regarding its soil, water and plant resources. Almost 80% of the farm's area is covered with trees, shrubs and low vegetation planted in a mosaic of parterres. Farm data collected concerned soil and water physicochemical characteristics, plant species, topographical features, irrigation network, valves and infrastructure. All data were imported and developed in a GIS geodatabase. Furthermore, web GIS services and a mobile GIS app were developed in order to monitor, update and synchronize present status and future changes performed in the farm. Through the web services and using the mobile GIS app, the user has access to all data stored in the geodatabase and according to access rights he can view or edit the spatial entities. The user can easily make query to specific features, combine their properties with other overlaying spatial data and reach accurate decisions. The app can be downloaded and implemented in mobile devices like smartphones and tablets for extending its functionality. As proven in this study, web GIS services and mobile GIS apps constitute an attractive suite of methodologies for effective and user friendly management of natural resources at farm level.

A new data integration approach for AutoCAD and GIS

Science.gov (United States)

Ye, Hongmei; Li, Yuhong; Wang, Cheng; Li, Lijun

2006-10-01

GIS has its advantages both on spatial data analysis and management, particularly on the geometric and attributive information management, which has also attracted lots attentions among researchers around world. AutoCAD plays more and more important roles as one of the main data sources of GIS. Various work and achievements can be found in the related literature. However, the conventional data integration from AutoCAD to GIS is time-consuming, which also can cause the information loss both in the geometric aspects and the attributive aspects for a large system. It is necessary and urgent to sort out new approach and algorithm for the efficient high-quality data integration. In this paper, a novel data integration approach from AutoCAD to GIS will be introduced based on the spatial data mining technique through the data structure analysis both in the AutoCAD and GIS. A practicable algorithm for the data conversion from CAD to GIS will be given as well. By a designed evaluation scheme, the accuracy of the conversion both in the geometric and the attributive information will be demonstrated. Finally, the validity and feasibility of the new approach will be shown by an experimental analysis.

Where Public Health Meets Human Rights

Science.gov (United States)

Kiragu, Karusa; Sawicki, Olga; Smith, Sally; Brion, Sophie; Sharma, Aditi; Mworeko, Lilian; Iovita, Alexandrina

2017-01-01

Abstract In 2014, the World Health Organization (WHO) initiated a process for validation of the elimination of mother-to-child transmission (EMTCT) of HIV and syphilis by countries. For the first time in such a process for the validation of disease elimination, WHO introduced norms and approaches that are grounded in human rights, gender equality, and community engagement. This human rights-based validation process can serve as a key opportunity to enhance accountability for human rights protection by evaluating EMTCT programs against human rights norms and standards, including in relation to gender equality and by ensuring the provision of discrimination-free quality services. The rights-based validation process also involves the assessment of participation of affected communities in EMTCT program development, implementation, and monitoring and evaluation. It brings awareness to the types of human rights abuses and inequalities faced by women living with, at risk of, or affected by HIV and syphilis, and commits governments to eliminate those barriers. This process demonstrates the importance and feasibility of integrating human rights, gender, and community into key public health interventions in a manner that improves health outcomes, legitimizes the participation of affected communities, and advances the human rights of women living with HIV. PMID:29302179

Gut microbiomes and their metabolites shape human and animal health.

Science.gov (United States)

Park, Woojun

2018-03-01

The host genetic background, complex surrounding environments, and gut microbiome are very closely linked to human and animal health and disease. Although significant correlations between gut microbiota and human and animal health have been revealed, the specific roles of each gut bacterium in shaping human and animal health and disease remain unclear. However, recent omics-based studies using experimental animals and surveys of gut microbiota from unhealthy humans have provided insights into the relationships among microbial community, their metabolites, and human and animal health. This editorial introduces six review papers that provide new discoveries of disease-associated microbiomes and suggest possible microbiome-based therapeutic approaches to human disease.

Technology integrated teaching in Malaysian schools: GIS, a SWOT analysis

Directory of Open Access Journals (Sweden)

Habibah Lateh, vasugiammai muniandy

2011-08-01

Full Text Available Geographical Information System (GIS has been introduced and widely used in schools in various countries. The year 1990 onwards, the implementation of GIS in schools showed an increase. This is due to the drastic changes and reforms in the education system. Even though the name GIS suits well to the Geography subject, but it is widely integrated in various subjects such as History, Chemistry, Physics and Science. In Malaysia, GIS is common in fields such as risk management, architecture, town planning and municipal department. Anyhow, it is still unknown in the school education system. Even upper secondary students are not familiar with GIS. The Ministry of Education in Malaysia has been continuously reforming the education towards the aim of creating a society based on economic fundamentals and knowledge. The Master Plan for Educational Development with the aim of developing individual potential with well-integrated and balanced education is already on field. Recently, Malaysia invested 18 % of the annual national budget towards upgrading its education system. The computer in education program started in 1999. Three hundred and twenty two schools were chosen as ‘break a way’ from conventional teaching method towards technology integrated teaching. Projects such as New Primary School Curriculum (KBSR, Integrated Secondary School Curriculum (KBSM, Smart School Project, School Access Centre were introduced constantly. Teacher as the cogwheel of innovations in schools were given courses in aim to develop their ICT knowledge and skill. To this date, the technology integration in subjects is not equal and it disperses through subjects. Geography is one of the ‘dry’ subjects in schools with less technology which is not preferable among students. Geographical Information System (GIS is foremost the best Geographical Information Technology (GIT to be implied in geography subject. In Malaysian Education System, GIS is still exposed just in papers

Building archaeology geodatabase in Iraq using GIS

Directory of Open Access Journals (Sweden)

Kalaf Abbas

2018-01-01

Full Text Available Geomatics has been an important tool in archaeology. The combination of Geomatics and archaeology adopters have been considered a perfect match, since archaeology often involves the study of the spatial dimension of human behavior over time, and all archaeology carries a spatial component. Since Iraqi archaeology becomes one of the main victims of destruction by negligence and terror attacks, makes our great heritages forgotten. Hence, it is necessary to build a secure database for all Iraqi archeological sites with their two main types (investigated and uninvestigated and rely on digital system by creating digital maps for each Governorate with their archeological database system. Results of archaeological studies are rich in spatial information. GIS is adept at processing these large volumes of data especially those that are geographically referenced. It is effective, accurate and a fast tool. The tools made available through GIS help in data collection, its storage and retrieval, its ability for customization and, finally, the display of the data so that it is visually comprehensible by the user. The most important aspect of GIS in archaeology lies, however, not in its use as a pure map-making tool, but in its capability to merge and analyze

[Location selection for Shenyang urban parks based on GIS and multi-objective location allocation model].

Science.gov (United States)

Zhou, Yuan; Shi, Tie-Mao; Hu, Yuan-Man; Gao, Chang; Liu, Miao; Song, Lin-Qi

2011-12-01

Based on geographic information system (GIS) technology and multi-objective location-allocation (LA) model, and in considering of four relatively independent objective factors (population density level, air pollution level, urban heat island effect level, and urban land use pattern), an optimized location selection for the urban parks within the Third Ring of Shenyang was conducted, and the selection results were compared with the spatial distribution of existing parks, aimed to evaluate the rationality of the spatial distribution of urban green spaces. In the location selection of urban green spaces in the study area, the factor air pollution was most important, and, compared with single objective factor, the weighted analysis results of multi-objective factors could provide optimized spatial location selection of new urban green spaces. The combination of GIS technology with LA model would be a new approach for the spatial optimizing of urban green spaces.

Adaptions of ArcGIS' Linear Referencing System to the Coastal Environment

DEFF Research Database (Denmark)

Balstrøm, Thomas

2008-01-01

For many years it has been problematic to store information for the coastal environment in a GIS. However, a system named "Linear referencing System" based upon a dynamic segmentation principle implemented in ESRIs ArcGIS 9 software has now made it possible to store and analyze information...

An ArcGIS decision support tool for artificial reefs site selection (ArcGIS ARSS)

Science.gov (United States)

Stylianou, Stavros; Zodiatis, George

2017-04-01

Although the use and benefits of artificial reefs, both socio-economic and environmental, have been recognized with research and national development programmes worldwide their development is rarely subjected to a rigorous site selection process and the majority of the projects use the traditional (non-GIS) approach, based on trial and error mode. Recent studies have shown that the use of Geographic Information Systems, unlike to traditional methods, for the identification of suitable areas for artificial reefs siting seems to offer a number of distinct advantages minimizing possible errors, time and cost. A decision support tool (DSS) has been developed based on the existing knowledge, the multi-criteria decision analysis techniques and the GIS approach used in previous studies in order to help the stakeholders to identify the optimal locations for artificial reefs deployment on the basis of the physical, biological, oceanographic and socio-economic features of the sites. The tool provides to the users the ability to produce a final report with the results and suitability maps. The ArcGIS ARSS support tool runs within the existing ArcMap 10.2.x environment and for the development the VB .NET high level programming language has been used along with ArcObjects 10.2.x. Two local-scale case studies were conducted in order to test the application of the tool focusing on artificial reef siting. The results obtained from the case studies have shown that the tool can be successfully integrated within the site selection process in order to select objectively the optimal site for artificial reefs deployment.

Health Care and Human Trafficking: We are Seeing the Unseen.

Science.gov (United States)

Chisolm-Straker, Makini; Baldwin, Susie; Gaïgbé-Togbé, Bertille; Ndukwe, Nneka; Johnson, Pauline N; Richardson, Lynne D

2016-01-01

This study aimed to build the evidence base around human trafficking (HT) and health in the U.S. by employing a quantitative approach to exploring the notion that health care providers encounter this population. Furthermore, this study sought to describe the health care settings most frequented by victims of human trafficking. This was an anonymous, retrospective study of survivors of U.S.-based human trafficking. One hundred and seventy-three participants who endured U.S.-based human trafficking were surveyed. The majority (68%, n=117) of participants were seen by a health care provider while being trafficked. Respondents most frequently reported visiting emergency/urgent care practitioners (56%), followed by primary care providers, dentists, and obstetricians/gynecologists (OB/GYNs). While health care providers are serving this patient population, they do not consistently identify them as victims of human trafficking.

PaleoGeo: a Web based GIS database for paleoenvironmental studies

Science.gov (United States)

Song, Wonsuh; Kondo, Yasuhisa; Oguchi, Takashi

2014-05-01

Paleoenvironmental studies cover various fields such as paleohydrology, geomorphology, paleooceanology, paleobiology, paleoclimatology, and chronology. It is difficult for an individual researcher to collect and compile enormous data regarding these fields. We have been compiling portal data and presenting them using a web-based geographical information system (Web-GIS) called PaleoGeo for the multidisciplinary project 'Replacement of Neanderthals by Modern Humans'. The aim of the project is to reconstruct the distribution of Neanderthals and modern humans in time and space in relation to past climate change. We have been collecting information from almost three thousand articles of 13 journals regarding paleoenvironmental research (i.e., Boreas, Catena, Climatic Change, Earth Surface Processes and Landforms, Geomorphology, Journal of Quaternary Science, Palaeogeography, Palaeoclimatology, and Palaeoecology, Quaternary International, Quaternary Research, Quaternary Science Reviews, The Holocene, and The Journal of Geology). The topics of the articles were classified into six themes (paleohydrology, earth surface processes and materials, paleooceanology, paleobiology, palaeoclimatology, and chronology) and 19 subthemes (hydrology, flood, fluvial, glacier, fluvial/glacier, sedimentology, soil, slope process, periglacial, peat land, eolian, sea-level, biology, vegetation, zoology, vegetation/zoology, archaeology, climate, atmosphere, and chronology). The collected data consist of the journal name, information about each paper (authors, title, volume, year, and page numbers), site location (country name, longitude, and latitude), theme, subtheme, keywords, DOI (Digital Object Identifier), and period (era). Location data are indispensable for paleoenvironmental studies. The PaleoGeo shows information with a map, which is an advantage of this database system. However, the number of the paleoenvironmental studies is growing rapidly and we have to effectively cover them as

Energy management based on AM/FM/GIS for phase balancing application on distribution systems

International Nuclear Information System (INIS)

Kuo, C.-C.; Chao, Y.-T.

2010-01-01

Unbalanced feeder systems may deteriorate of power quality, and increase investment and operating costs for distribution systems. The phase swapping method recommends re-phasing circuits of laterals and transformers for making the current and voltage balanced and also reducing feeder loss and voltage drop. In this paper, an application program, based on the automated mapping/facilities management/ geographic information system (AM/FM/GIS) is developed which contains a function of automatically computing Z-bus, load flow and phase balancing of feeders with phase swapping by using easily selecting of feeder on a graphic user interface application. Therefore, the relative data need not be keyed in manually. The presented phase balancing algorithm are based on database and related data structures developed on the AM/FM/GIS and Visual Basic software, which can be integrated into the Tai-Power distribution automation system. Then, the phase balancing algorithm is designed to handle the load patterns and the load of transformers that connect specific feeders when evaluating phase swaps that will result in reduced daily circuit losses over all load points. The proposed application not only can effectively reduce the circuit loss and improves phase balancing, but also enhances power quality efficiently under easily using environment.