WorldWideScience

Sample records for gis-based environmental assessment

  1. Environmental Condition Assessment of US Military Installations Using GIS Based Spatial Multi-Criteria Decision Analysis

    Science.gov (United States)

    Singer, Steve; Wang, Guangxing; Howard, Heidi; Anderson, Alan

    2012-08-01

    Environment functions in various aspects including soil and water conservation, biodiversity and habitats, and landscape aesthetics. Comprehensive assessment of environmental condition is thus a great challenge. The issues include how to assess individual environmental components such as landscape aesthetics and integrate them into an indicator that can comprehensively quantify environmental condition. In this study, a geographic information systems based spatial multi-criteria decision analysis was used to integrate environmental variables and create the indicator. This approach was applied to Fort Riley Military installation in which land condition and its dynamics due to military training activities were assessed. The indicator was derived by integrating soil erosion, water quality, landscape fragmentation, landscape aesthetics, and noise based on the weights from the experts by assessing and ranking the environmental variables in terms of their importance. The results showed that landscape level indicator well quantified the overall environmental condition and its dynamics, while the indicator at level of patch that is defined as a homogeneous area that is different from its surroundings detailed the spatiotemporal variability of environmental condition. The environmental condition was mostly determined by soil erosion, then landscape fragmentation, water quality, landscape aesthetics, and noise. Overall, environmental condition at both landscape and patch levels greatly varied depending on the degree of ground and canopy disturbance and their spatial patterns due to military training activities and being related to slope. It was also determined the environment itself could be recovered quickly once military training was halt or reduced. Thus, this study provided an effective tool for the army land managers to monitor environmental dynamics and plan military training activities. Its limitation lies at that the obtained values of the indicator vary and are

  2. A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models.

    Science.gov (United States)

    Pope, Ronald; Wu, Jianguo

    2014-06-01

    In the United States, air pollution is primarily measured by Air Quality Monitoring Networks (AQMN). These AQMNs have multiple objectives, including characterizing pollution patterns, protecting the public health, and determining compliance with air quality standards. In 2006, the U.S. Environmental Protection Agency issued a directive that air pollution agencies assess the performance of their AQMNs. Although various methods to design and assess AQMNs exist, here we demonstrate a geographic information system (GIS)-based approach that combines environmental, economic, and social indicators through the assessment of the ozone (O3) and particulate matter (PM10) networks in Maricopa County, Arizona. The assessment was conducted in three phases: (1) to evaluate the performance of the existing networks, (2) to identify areas that would benefit from the addition of new monitoring stations, and (3) to recommend changes to the AQMN. A comprehensive set of indicators was created for evaluating differing aspects of the AQMNs' objectives, and weights were applied to emphasize important indicators. Indicators were also classified according to their sustainable development goal. Our results showed that O3 was well represented in the county with some redundancy in terms of the urban monitors. The addition of weights to the indicators only had a minimal effect on the results. For O3, urban monitors had greater social scores, while rural monitors had greater environmental scores. The results did not suggest a need for adding more O3 monitoring sites. For PM10, clustered urban monitors were redundant, and weights also had a minimal effect on the results. The clustered urban monitors had overall low scores; sites near point sources had high environmental scores. Several areas were identified as needing additional PM10 monitors. This study demonstrates the usefulness of a multi-indicator approach to assess AQMNs. Network managers and planners may use this method to assess the

  3. GIS-based assessment of landslide susceptibility using certainty ...

    Indian Academy of Sciences (India)

    GIS-based assessment of landslide susceptibility using certainty factor and index of entropy models for the Qianyang County of Baoji city, China ... The `success rate' curve showed that the area under the curve for CF and IOE models were 0.8433 (84.33%) and 0.8227 (82.27%) accuracy, respectively. Similarly, the ...

  4. GIS-based integrated groundwater potential assessment of Osun ...

    African Journals Online (AJOL)

    A GIS-based integrated approach was adopted to assess the groundwater potential of Osun Drainage Basin underlain by the Basement Complex terrain of Southwestern Nigeria. Topographic parameters including surface curvatures, slope and elevation were derived from SPOT DEM and used to generate landform and ...

  5. TVA GIS-based biomass resource assessment

    International Nuclear Information System (INIS)

    Noon, C.E.

    1993-01-01

    The focus of this paper is a computer-based system for estimating the costs of supplying wood fuel. The system is being developed for the Tennessee Valley Authority and is referred to as the Biomass Resource Assessment Version One (BRAVO) system. The main objective in developing the BRAVO system is to assist TVA in estimating the cost for supplying wood fuel to any one of its twelve coal-fired power plants. The BRAVO system is developed within a Geographic Information System (GIS) platform and is designed to allow a user to perform open-quotes what ifclose quotes analyses related to the costs of wood fuel supply. Three types of wood fuel are considered in the Bravo system: mill residues, logging residues and short-rotation woody crops (SRWC). Each type of wood fuel has unique economic and supply characteristics. The input data for the system includes the specific locations, amounts, and prices of the various types of wood fuel throughout the TVA region. The system input is completed by data on political boundaries, power plant locations, road networks and a model for estimating transportation costs as a function of distance. The result is a comprehensive system which includes information on all possible wood fuel supply points, demand points and product movement costs. In additions, the BRAVO system has been designed to allow a user to perform sensitivity analysis on a variety of supply system parameters. This will enable TVA to thoroughly investigate the financial impacts of issues such as increased competition for wood fuel, environmental policies, fuel taxes, and regional economic cycles

  6. TVA GIS-based biomass resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Noon, C.E. [Univ. of Tennessee, Knoxville, TN (United States)

    1993-12-31

    The focus of this paper is a computer-based system for estimating the costs of supplying wood fuel. The system is being developed for the Tennessee Valley Authority and is referred to as the Biomass Resource Assessment Version One (BRAVO) system. The main objective in developing the BRAVO system is to assist TVA in estimating the costs for supplying wood fuel to any one of its twelve coal-fired plants. The BRAVO system is developed within a Geographic Information System (GIS) platform and is designed to allow a user to perform {open_quotes}what if{close_quotes} analyses related to the costs of wood fuel supply. Three types of wood fuel are considered in the BRAVO system: mill residues, logging residues and short-rotation woody crops (SRWC). Each type of wood fuel has unique economic and supply characteristics. The input data for the system includes the specific locations, amount, and prices of the various types of wood fuel throughout the TVA region. The system input is completed by data on political boundaries, power plant locations, road networks and a model for estimating transportation costs as a function of distance. The result is a comprehensive system which includes information on all possible wood fuel supply joints, demand points and product movement costs. In addition, the BRAVO system has been designed to allow a user to perform sensitivity analysis on a variety of supply system parameters. This will enable TVA to thoroughly investigate the financial impacts of issues such as increased competition for wood fuel, environmental policies, fuel taxes, and regional economic cycles.

  7. Gis-based assessment of marine oil spill hazard and environmental vulnerability for the coasts of Crete in South Aegean Sea

    Science.gov (United States)

    Spanoudaki, Katerina; Nikiforakis, Ioannis K.; Kampanis, Nikolaos A.

    2017-04-01

    Developing effective early warning and coordination systems can save thousands of lives and protect people, property and the environment in the event of natural and man-made disasters. In its document "Towards Better Protection of Citizens against Disaster Risks: Strengthening Early Warning Systems in Europe", the Commission points out that it seeks to follow a multi-hazard approach, to develop near real time alert systems, to ensure a near real time dissemination of alerts to Participating States, and to improve its rapid analytical capacity. In this context, the EU project DECATASTROPHIZE (http://decatastrophize.eu/project/) co-financed by the EU Humanitarian Aid and Civil Protection aims to develop a Geospatial Early warning Decision Support System (GE-DSS) to assess, prepare for and respond to multiple and/or simultaneous natural and man-made hazards, disasters, and environmental incidents by using existing models/systems in each partner country (Cyprus, France, Greece, Italy and Spain) in a synergistic way on ONE multi-platform, called DECAT. Specifically, project partners will establish appropriate geo-databases for test areas and use existing hazard models to produce hazard and vulnerability geo-spatial information for earthquakes, landslides, tsunamis, floods, forest fires and marine oil spills. The GE-DSS in will consist of one source code with six geodatabases, i.e., one for each partner and risk data in the respective test area. Each partner organization will be able to manage and monitor its own data/database and their results using Multi-Criteria Decision Analysis (MCDA). The GE-DSS will be demonstrated at the local, regional and national levels through a set of Command Post and Table Top Disaster Exercises. As part of the DECAT GE-DSS, the gis-based geo-database and assessment of marine oil spill hazard and environmental vulnerability for the coasts of Crete in South Aegean Sea are presented here. Environmental Sensitivity Index (ESI) maps are

  8. GIS-based assessment of landslide susceptibility using certainty ...

    Indian Academy of Sciences (India)

    logic (Pourghasemi et al. 2012a, 2012b, 2012c;. Guettouche 2013; Sharma et ... Landslide susceptibility assessment using mathematical methods in GIS, Qianyang China 1401. Figure 1. Location of the study area. landslide ..... The rainfall was taken into account as a trigger- ing factor for landslide initiation, thus it is another.

  9. Improved GIS-based Methods for Traffic Noise Impact Assessment

    DEFF Research Database (Denmark)

    Nielsen, Otto Anker; Bloch, Karsten Sand

    1996-01-01

    When vector-based GIS-packages are used for traffic noise impact assessments, the buffer-technique is usually employed for the study: 1. For each road segment buffer-zones representing different noise-intervals are generated, 2. The buffers from all road segments are smoothed together, and 3....... The number of buildings within the buffers are enumerated. This technique provides an inaccurate assessment of the noise diffusion since it does not correct for buildings barrier and reflection to noise. The paper presents the results from a research project where the traditional noise buffer technique...... was compared with a new method which includes these corrections. Both methods follow the Common Nordic Noise Calculation Model, although the traditional buffer technique ignores parts of the model. The basis for the work was a digital map of roads and building polygons, combined with a traffic- and road...

  10. Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Roberts, Billy J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-04-05

    Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solar photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.

  11. Identifying High-Risk Populations of Tuberculosis Using Environmental Factors and GIS Based Multi-Criteria Decision Making Method

    Science.gov (United States)

    Rasam, A. R. Abdul; Shariff, N. M.; Dony, J. F.

    2016-09-01

    Development of an innovative method to enhance the detection of tuberculosis (TB) in Malaysia is the latest agenda of the Ministry of Health. Therefore, a geographical information system (GIS) based index model is proposed as an alternative method for defining potential high-risk areas of local TB cases at Section U19, Shah Alam. It is adopted a spatial multi-criteria decision making (MCDM) method for ranking environmental risk factors of the disease in a standardised five-score scale. Scale 1 and 5 illustrate the lowest and the highest risk of the TB spread respectively, while scale from 3 to 5 is included as a potential risk level. These standardised scale values are then combined with expert normalised weights (0 to 1) to calculate the overall index values and produce a TB ranked map using a GIS overlay analysis and weighted linear combination. It is discovered that 71.43% of the Section is potential as TB high risk areas particularly at urban and densely populated settings. This predictive result is also reliable with the current real cases in 2015 by 76.00% accuracy. A GIS based MCDM method has demonstrated analytical capabilities in targeting high-risk spots and TB surveillance monitoring system of the country, but the result could be strengthened by applying other uncertainty assessment method.

  12. Use of GIS-Based Sampling to Inform Food Security Assessments and Decision Making in Kenya

    Science.gov (United States)

    Wahome, A.; Ndubi, A. O.; Ndungu, L. W.; Mugo, R. M.; Flores Cordova, A. I.

    2017-12-01

    Kenya relies on agricultural production for supporting local consumption and other processing value chains. With changing climate in a rain-fed dependent agricultural production system, cropping zones are shifting and proper decision making will require updated data. Where up-to-date data is not available it is important that it is generated and passed over to relevant stakeholders to inform their decision making. The process of generating this data should be cost effective and less time consuming. The Kenyan State Department of Agriculture (SDA) runs an insurance programme for maize farmers in a number of counties in Kenya. Previously, SDA was using a list of farmers to identify the crop fields for this insurance programme. However, the process of listing of all farmers in each Unit Area of Insurance (UAI) proved to be tedious and very costly, hence need for an alternative approach, but acceptable sampling methodology. Building on the existing cropland maps, SERVIR, a joint NASA-USAID initiative that brings Earth observations (EO) for improved environmental decision making in developing countries, specifically its hub in Eastern and Soutehrn Africa developed a High Resolution Map based on 10m Sentinel satellite images from which a GIS based sampling frame for identifying maize fields was developed. Sampling points were randomly generated in each UAI and navigated to using hand-held GPS units for identification of maize farmers. In the GIS-based identification of farmers SDA uses 1 day to cover an area covered in 1 week by list identification of farmers. Similarly, SDA spends approximately 3,000 USD per sub-county to locate maize fields using GIS-based sampling as compared 10,000 USD they used to spend before. This has resulted in 70% cost reduction.

  13. Developing a GIS-Based Visual-Acoustic 3D Simulation for Wind Farm Assessment

    Directory of Open Access Journals (Sweden)

    Madeleine Manyoky

    2014-01-01

    Full Text Available Public landscape impact assessment of renewable energy installations is crucial for their acceptance. Thus, a sound assessment basis is crucial in the implementation process. For valuing landscape perception, the visual sense is the dominant human sensory component. However, the visual sense provides only partial information about our environment. Especially when it comes to wind farm assessments, noise produced by the rotating turbine blades is another major impact factor. Therefore, an integrated visual and acoustic assessment of wind farm projects is needed to allow lay people to perceive their impact adequately. This paper presents an approach of linking spatially referenced auralizations to a GIS-based virtual 3D landscape model. We demonstrate how to utilize a game engine for 3D visualization of wind parks, using geodata as a modeling basis. In particular, the controlling and recording of specific parameters in the game engine is shown in order to establish a link to the acoustical model. The resulting prototype has high potential to complement conventional tools for an improved public impact assessment of wind farms.

  14. The Uncertainties on the GIS Based Land Suitability Assessment for Urban and Rural Planning

    Science.gov (United States)

    Liu, H.; Zhan, Q.; Zhan, M.

    2017-09-01

    The majority of the research on the uncertainties of spatial data and spatial analysis focuses on some specific data feature or analysis tool. Few have accomplished the uncertainties of the whole process of an application like planning, making the research of uncertainties detached from practical applications. The paper discusses the uncertainties of the geographical information systems (GIS) based land suitability assessment in planning on the basis of literature review. The uncertainties considered range from index system establishment to the classification of the final result. Methods to reduce the uncertainties arise from the discretization of continuous raster data and the index weight determination are summarized. The paper analyzes the merits and demerits of the "Nature Breaks" method which is broadly used by planners. It also explores the other factors which impact the accuracy of the final classification like the selection of class numbers, intervals and the autocorrelation of the spatial data. In the conclusion part, the paper indicates that the adoption of machine learning methods should be modified to integrate the complexity of land suitability assessment. The work contributes to the application of spatial data and spatial analysis uncertainty research on land suitability assessment, and promotes the scientific level of the later planning and decision-making.

  15. THE UNCERTAINTIES ON THE GIS BASED LAND SUITABILITY ASSESSMENT FOR URBAN AND RURAL PLANNING

    Directory of Open Access Journals (Sweden)

    H. Liu

    2017-09-01

    Full Text Available The majority of the research on the uncertainties of spatial data and spatial analysis focuses on some specific data feature or analysis tool. Few have accomplished the uncertainties of the whole process of an application like planning, making the research of uncertainties detached from practical applications. The paper discusses the uncertainties of the geographical information systems (GIS based land suitability assessment in planning on the basis of literature review. The uncertainties considered range from index system establishment to the classification of the final result. Methods to reduce the uncertainties arise from the discretization of continuous raster data and the index weight determination are summarized. The paper analyzes the merits and demerits of the “Nature Breaks” method which is broadly used by planners. It also explores the other factors which impact the accuracy of the final classification like the selection of class numbers, intervals and the autocorrelation of the spatial data. In the conclusion part, the paper indicates that the adoption of machine learning methods should be modified to integrate the complexity of land suitability assessment. The work contributes to the application of spatial data and spatial analysis uncertainty research on land suitability assessment, and promotes the scientific level of the later planning and decision-making.

  16. A novel GIS-based approach to assess beekeeping suitability of Mediterranean lands.

    Science.gov (United States)

    Zoccali, Paolo; Malacrinò, Antonino; Campolo, Orlando; Laudani, Francesca; Algeri, Giuseppe M; Giunti, Giulia; Strano, Cinzia P; Benelli, Giovanni; Palmeri, Vincenzo

    2017-07-01

    Honeybees are critically important for the environment and to the economy. However, there are in substantial decline worldwide, leading to serious threat to the stability and yield of food crops. Beekeeping is of pivotal importance, combining the wide economical aspect of honey production and the important ecological services provided by honeybees. In this scenario, the prompt identification of beekeeping areas is strategic, since it maximised productivity and lowered the risks of colony losses. Fuzzy logic is an ideal approach for problem-solving tasks, as it is specifically designed to manage problems with a high degree of uncertainty. This research tested a novel GIS-based approach to assess beekeeping suitability of lands located in Calabria (Southern Italy), without relying to Analytic Hierarchy Process - Multiple Criteria Decision Making (AHP-MCDM), thus avoiding the constraints due to the technique and decision makers' influences. Furthermore, the data used here were completely retrieved from open access sources, highlighting that our approach is characterized by low costs and can be easily reproduced for a wide arrays of geographical contexts. Notably, the results obtained by our experiments were validated by the actual beekeeping reality. Besides beekeeping, the use of this system could not only be applied in beekeeping land suitability evaluations, but may be successfully extended to other types of land suitability evaluations.

  17. GIS-based integrated assessment and decision support system for land use planning in consideration of carbon sequestration benefits

    Science.gov (United States)

    Wang, Jun; Chen, J. M.; Li, Manchun; Ju, Weimin

    2007-06-01

    As the major eligible land use activities in the Clean Development Mechanism (CDM), afforestation and reforestation offer opportunities and potential economic benefits for developing countries to participate in carbon-trade in the potential international carbon (C) sink markets. However, the design and selection of appropriate afforestation and reforestation locations in CDM are complex processes which need integrated assessment (IA) of C sequestration (CS) potential, environmental effects, and socio-economic impacts. This paper promotes the consideration of CS benefits in local land use planning and presents a GIS-based integrated assessment and spatial decision support system (IA-SDSS) to support decision-making on 'where' and 'how' to afforest. It integrates an Integrated Terrestrial Ecosystem Carbon Model (InTEC) and a GIS platform for modeling regional long-term CS potential and assessment of geo-referenced land use criteria including CS consequence, and produces ranking of plantation schemes with different tree species using the Analytic hierarchy process (AHP) method. Three land use scenarios are investigated: (i) traditional land use planning criteria without C benefits, (ii) land use for CS with low C price, and (iii) land use for CS with high price. Different scenarios and consequences will influence the weights of tree-species selection in the AHP decision process.

  18. An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest.

    Science.gov (United States)

    Suh, Jangwon; Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

    2017-11-27

    In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further.

  19. A GIS-based tool for an integrated assessment of spatial planning trade-offs with aquaculture.

    Science.gov (United States)

    Gimpel, Antje; Stelzenmüller, Vanessa; Töpsch, Sandra; Galparsoro, Ibon; Gubbins, Matthew; Miller, David; Murillas, Arantza; Murray, Alexander G; Pınarbaşı, Kemal; Roca, Guillem; Watret, Robert

    2018-06-15

    The increasing demand for protein from aquaculture will trigger a global expansion of the sector in coastal and offshore waters. While contributing to food security, potential conflicts with other traditional activities such as fisheries or tourism are inevitable, thus calling for decision-support tools to assess aquaculture planning scenarios in a multi-use context. Here we introduce the AquaSpace tool, one of the first Geographic Information System (GIS)-based planning tools empowering an integrated assessment and mapping of 30 indicators reflecting economic, environmental, inter-sectorial and socio-cultural risks and opportunities for proposed aquaculture systems in a marine environment. A bottom-up process consulting more than 350 stakeholders from 10 countries across southern and northern Europe enabled the direct consideration of stakeholder needs when developing the GIS AddIn. The AquaSpace tool is an open source product and builds in the prospective use of open source datasets at a European scale, hence aiming to improve reproducibility and collaboration in aquaculture science and research. Tool outputs comprise detailed reports and graphics allowing key stakeholders such as planners or licensing authorities to evaluate and communicate alternative planning scenarios and to take more informed decisions. With the help of the German North Sea case study we demonstrate here the tool application at multiple spatial scales with different aquaculture systems and under a range of space-related development constraints. The computation of these aquaculture planning scenarios and the assessment of their trade-offs showed that it is entirely possible to identify aquaculture sites, that correspondent to multifarious potential challenges, for instance by a low conflict potential, a low risk of disease spread, a comparable high economic profit and a low impact on touristic attractions. We believe that a transparent visualisation of risks and opportunities of aquaculture

  20. GIS-based Environmental Monitoring of Montane Forest Ecosystems in Protected Areas

    Directory of Open Access Journals (Sweden)

    Nikolay A. Bityukov

    2012-08-01

    Full Text Available This paper includes results on a study of montane forest ecosystems in the present-day climate change environment. We have worked out the principles and criteria for ecological monitoring of montane forest ecosystems. It is established that iconditions, the object of research, the basic requirements for ecological monitoring is a catchment. To assess the influence of forest vegetation (and, hence, forestry and recreation on the slopes of the water balance and hydrological regime of streams it is proposed to use a tiered system of ranking watersheds. In order to obtain up-to-date information on the condition of montane forest ecosystems it is proposed to use GIS-technologies actively.

  1. GIS-based health assessment of the marine ecosystem in Laizhou Bay, China.

    Science.gov (United States)

    Song, Debin; Gao, Zhiqiang; Zhang, Hua; Xu, Fuxiang; Zheng, Xiangyu; Ai, Jinquan; Hu, Xiaoke; Huang, Guopei; Zhang, Haibo

    2017-12-15

    According to 2014-2016 monitoring data, an assessment index system including water quality, depositional environment and ecosystem was built to evaluate the health statue of marine ecosystem in the Laizhou Bay using analytic hierarchy process (AHP) method. The results, spatialized in ArcGIS software, show: while the comprehensive ecological health index is 0.62, the ecological environmental quality in the Laizhou Bay is in a sub-healthy state; the unhealthy area is mainly concentrated in southwestern inshore region, and impacted by serious environmental problems, such as water eutrophication and heavy metal pollution; the northwestern and southeastern inshore regions are in a sub-healthy state, while the eastern inshore and northern areas are in the healthiest state. The land-based pollutants that discharge into the sea may be the leading factors that are causing ecological environment deterioration in the Laizhou Bay, and the reclamation work ongoing around the port has exacerbated the ecological risk. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. GIS-based assessment and characterization of groundwater quality in a hard-rock hilly terrain of Western India.

    Science.gov (United States)

    Machiwal, Deepesh; Jha, Madan K; Mal, Bimal C

    2011-03-01

    The growing population, pollution, and misuse of freshwater worldwide necessitate developing innovative methods and efficient strategies to protect vital groundwater resources. This need becomes more critical for arid/semi-arid regions of the world. The present study focuses on a GIS-based assessment and characterization of groundwater quality in a semi-arid hard-rock terrain of Rajasthan, western India using long-term and multi-site post-monsoon groundwater quality data. Spatio-temporal variations of water quality parameters in the study area were analyzed by GIS techniques. Groundwater quality was evaluated based on a GIS-based Groundwater Quality Index (GWQI). A Potential GWQI map was also generated for the study area following the Optimum Index Factor concept. The most-influential water quality parameters were identified by performing a map removal sensitivity analysis among the groundwater quality parameters. Mean annual concentration maps revealed that hardness is the only parameter that exceeds its maximum permissible limit for drinking water. GIS analysis revealed that sulfate and nitrate ions exhibit the highest (CV > 30%) temporal variation, but groundwater pH is stable. Hardness, EC, TDS, and magnesium govern the spatial pattern of the GWQI map. The groundwater quality of the study area is generally suitable for drinking and irrigation (median GWQI > 74). The GWQI map indicated that relatively high-quality groundwater exists in northwest and southeast portions of the study area. The groundwater quality parameter group of Ca, Cl, and pH were found to have the maximum value (6.44) of Optimum Index factor. It is concluded that Ca, Cl, and pH are three prominent parameters for cost-effective and long-term water quality monitoring in the study area. Hardness, Na, and SO(4), being the most-sensitive water quality parameters, need to be monitored regularly and more precisely.

  3. A GIS-based approach for desertification risk assessment in Apulia region, SE Italy

    Science.gov (United States)

    Ladisa, G.; Todorovic, M.; Trisorio Liuzzi, G.

    An assessment of the desertification risk was carried out for Apulia region (south-eastern Italy), a typical example of many Mediterranean areas affected by land degradation. The applied modelling approach is based on MEDALUS (Mediterranean Desertification and Land Use) project funded by the European Commission. A set of new indicators was developed to account for the regional-specific environmental features as well as for the socio-economic parameters relevant to land use planning and control measures. GIS analysis was done including the whole set of indices at both regional and administrative scales that constitute the principal territorial units for natural resources management and for the implementation of mitigation policies. The results showed good performance of the proposed approach that permits not only to identify and refine different degrees of vulnerability to land degradation, but also to analyse specific factors affecting desertification as well as their evaluation in terms of spatial and temporal distribution. The presented method can be easily implemented at different spatial scales (from watershed to regional level) and might represent a benchmark methodology to identify priority measures for mitigation of desertification risk in semi-arid Mediterranean environments.

  4. Modeling of geoelectric parameters for assessing groundwater potentiality in a multifaceted geologic terrain, Ipinsa Southwest, Nigeria - A GIS-based GODT approach

    Science.gov (United States)

    Mogaji, Kehinde Anthony; Omobude, Osayande Bright

    2017-12-01

    Modeling of groundwater potentiality zones is a vital scheme for effective management of groundwater resources. This study developed a new multi-criteria decision making algorithm for groundwater potentiality modeling through modifying the standard GOD model. The developed model christened as GODT model was applied to assess groundwater potential in a multi-faceted crystalline geologic terrain, southwestern, Nigeria using the derived four unify groundwater potential conditioning factors namely: Groundwater hydraulic confinement (G), aquifer Overlying strata resistivity (O), Depth to water table (D) and Thickness of aquifer (T) from the interpreted geophysical data acquired in the area. With the developed model algorithm, the GIS-based produced G, O, D and T maps were synthesized to estimate groundwater potential index (GWPI) values for the area. The estimated GWPI values were processed in GIS environment to produce groundwater potential prediction index (GPPI) map which demarcate the area into four potential zones. The produced GODT model-based GPPI map was validated through application of both correlation technique and spatial attribute comparative scheme (SACS). The performance of the GODT model was compared with that of the standard analytic hierarchy process (AHP) model. The correlation technique results established 89% regression coefficients for the GODT modeling algorithm compared with 84% for the AHP model. On the other hand, the SACS validation results for the GODT and AHP models are 72.5% and 65%, respectively. The overall results indicate that both models have good capability for predicting groundwater potential zones with the GIS-based GODT model as a good alternative. The GPPI maps produced in this study can form part of decision making model for environmental planning and groundwater management in the area.

  5. An unconventional GIS-based method to assess landslide susceptibility using point data features

    Science.gov (United States)

    Adami, S.; Bresolin, M.; Carraretto, M.; Castelletti, P.; Corò, D.; Di Mario, F.; Fiaschi, S.; Frasson, T.; Gandolfo, L.; Mazzalai, L.; Padovan, T.; Sartori, F.; Viganò, A.; Zulian, A.; De Agostini, A.; Pajola, M.; Floris, M.

    2012-04-01

    In this work are reported the results of a project performed by the students attending the course "GIS techniques in Applied Geology", in the master level of the Geological Sciences degree from the Department of Geosciences, University of Padua. The project concerns the evaluation of landslide susceptibility in the Val d'Agno basin, located in the North-Eastern Italian Alps and included in the Vicenza Province (Veneto Region, NE Italy). As well known, most of the models proposed to assess landslide susceptibility are based on the availability of spatial information on landslides and related predisposing environmental factors. Landslides and related factors are spatially combined in GIS systems to weight the influence of each predisposing factor and produce landslide susceptibility maps. The first and most important input factor is the layer landslide, which has to contain as minimum information shape and type of landslides, so it must be a polygon feature. In Italy, as well as in many countries all around the world, location and type of landslides are available in the main spatial databases (AVI project and IFFI project), but in few cases mass movements are delimited, thus they are spatially represented by point features. As an example, in the Vicenza Province, the IFFI database contains 1692 landslides stored in a point feature, but only 383 were delimited and stored in a polygon feature. In order to provide a method that allows to use all the information available and make an effective spatial prediction also in areas where mass movements are mainly stored in point features, punctual data representing landslide in the Val d'Agno basin have been buffered obtaining polygon features, which have been combined with morphometric (elevation, slope, aspect and curvature) and non-morphometric (land use, distance of roads and distance of river) factors. Two buffers have been created: the first has a radius of 10 meters, the minimum required for the analysis, and the second

  6. AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT: A GIS-BASED HYDROLOGIC MODELING TOOL

    Science.gov (United States)

    Planning and assessment in land and water resource management are evolving toward complex, spatially explicit regional assessments. These problems have to be addressed with distributed models that can compute runoff and erosion at different spatial and temporal scales. The extens...

  7. GIS-based approach for optimal siting and sizing of renewables considering techno-environmental constraints and the stochastic nature of meteorological inputs

    Science.gov (United States)

    Daskalou, Olympia; Karanastasi, Maria; Markonis, Yannis; Dimitriadis, Panayiotis; Koukouvinos, Antonis; Efstratiadis, Andreas; Koutsoyiannis, Demetris

    2016-04-01

    Following the legislative EU targets and taking advantage of its high renewable energy potential, Greece can obtain significant benefits from developing its water, solar and wind energy resources. In this context we present a GIS-based methodology for the optimal sizing and siting of solar and wind energy systems at the regional scale, which is tested in the Prefecture of Thessaly. First, we assess the wind and solar potential, taking into account the stochastic nature of the associated meteorological processes (i.e. wind speed and solar radiation, respectively), which is essential component for both planning (i.e., type selection and sizing of photovoltaic panels and wind turbines) and management purposes (i.e., real-time operation of the system). For the optimal siting, we assess the efficiency and economic performance of the energy system, also accounting for a number of constraints, associated with topographic limitations (e.g., terrain slope, proximity to road and electricity grid network, etc.), the environmental legislation and other land use constraints. Based on this analysis, we investigate favorable alternatives using technical, environmental as well as financial criteria. The final outcome is GIS maps that depict the available energy potential and the optimal layout for photovoltaic panels and wind turbines over the study area. We also consider a hypothetical scenario of future development of the study area, in which we assume the combined operation of the above renewables with major hydroelectric dams and pumped-storage facilities, thus providing a unique hybrid renewable system, extended at the regional scale.

  8. STEMS-Air: a simple GIS-based air pollution dispersion model for city-wide exposure assessment.

    Science.gov (United States)

    Gulliver, John; Briggs, David

    2011-05-15

    Current methods of air pollution modelling do not readily meet the needs of air pollution mapping for short-term (i.e. daily) exposure studies. The main limiting factor is that for those few models that couple with a GIS there are insufficient tools for directly mapping air pollution both at high spatial resolution and over large areas (e.g. city wide). A simple GIS-based air pollution model (STEMS-Air) has been developed for PM(10) to meet these needs with the option to choose different exposure averaging periods (e.g. daily and annual). STEMS-Air uses the grid-based FOCALSUM function in ArcGIS in conjunction with a fine grid of emission sources and basic information on meteorology to implement a simple Gaussian plume model of air pollution dispersion. STEMS-Air was developed and validated in London, UK, using data on concentrations of PM(10) from routinely available monitoring data. Results from the validation study show that STEMS-Air performs well in predicting both daily (at four sites) and annual (at 30 sites) concentrations of PM(10). For daily modelling, STEMS-Air achieved r(2) values in the range 0.19-0.43 (pplanning and management, or as the basis for health risk assessment and epidemiological studies. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

  9. A GIS-based assessment of groundwater suitability for irrigation purposes in flat areas of the wet Pampa plain, Argentina.

    Science.gov (United States)

    Romanelli, Asunción; Lima, María Lourdes; Quiroz Londoño, Orlando Mauricio; Martínez, Daniel Emilio; Massone, Héctor Enrique

    2012-09-01

    The Pampa in Argentina is a large plain with a quite obvious dependence on agriculture, water availability and its quality. It is a sensitive environment due to weather changes and slope variations. Supplementary irrigation is a useful practice for compensating the production in the zone. However, potential negative impacts of this type of irrigation in salinization and sodification of soils are evident. Most conventional methodologies for assessing water irrigation quality have difficulties in their application in the region because they do not adjust to the defined assumptions for them. Consequently, a new GIS-based methodology integrating multiparametric data was proposed for evaluating and delineating groundwater suitability zones for irrigation purposes in flat areas. Hydrogeological surveys including water level measurements, groundwater samples for chemical analysis and electrical conductivity (EC) measurements were performed. The combination of EC, sodium adsorption ratio, residual sodium carbonate, slopes and hydraulic gradient parameters generated an irrigation water index (IWI). With the integration of the IWI 1 to 3 classes (categories of suitable waters for irrigation) and the aquifer thickness the restricted irrigation water index (RIWI) was obtained. The IWI's index application showed that 61.3 % of the area has "Very high" to "Moderate" potential for irrigation, while the 31.4 % of it has unsuitable waters. Approximately, 46 % of the tested area has high suitability for irrigation and moderate groundwater availability. This proposed methodology has advantages over traditional methods because it allows for better discrimination in homogeneous areas.

  10. Multi-hazard risk assessment of coastal vulnerability from tropical cyclones - A GIS based approach for the Odisha coast.

    Science.gov (United States)

    Sahoo, Bishnupriya; Bhaskaran, Prasad K

    2018-01-15

    The coastal region bordering the East coast of India is a thickly populated belt exposed to high risk and vulnerability from natural hazards such as tropical cyclones. Tropical cyclone frequencies that develop over the Bay of Bengal (average of 5-6 per year) region are much higher as compared to the Arabian Sea thereby posing a high risk factor associated with storm surge, inland inundation, wind gust, intense rainfall, etc. The Odisha State in the East coast of India experiences the highest number of cyclone strikes as compared to West Bengal, Andhra Pradesh, and Tamil Nadu. To express the destructive potential resulting from tropical cyclones the Power Dissipation Index (PDI) is a widely used metric globally. A recent study indicates that PDI for cyclones in the present decade have increased about six times as compared to the past. Hence there is a need to precisely ascertain the coastal vulnerability and risk factors associated with high intense cyclones expected in a changing climate. As such there are no comprehensive studies attempted so far on the determination of Coastal Vulnerability Index (CVI) for Odisha coast that is highly prone to cyclone strikes. With this motivation, the present study makes an attempt to investigate the physical, environmental, social, and economic impacts on coastal vulnerability associated with tropical cyclones for the Odisha coast. The study also investigates the futuristic projection of coastal vulnerability over this region expected in a changing climate scenario. Eight fair weather parameters along with storm surge height and onshore inundation were used to estimate the Physical Vulnerability Index (PVI). Thereafter, the PVI along with social, economic, and environmental vulnerability was used to determine the overall CVI using the GIS based approach. The authors believe that the comprehensive nature of this study is expected to benefit coastal zone management authorities. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. GIS-BASED HYDROLOGIC MODELING: THE AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT TOOL

    Science.gov (United States)

    Planning and assessment in land and water resource management are evolving from simple, local scale problems toward complex, spatially explicit regional ones. Such problems have to be addressed with distributed models that can compute runoff and erosion at different spatial a...

  12. Planning for land use and conservation: Assessing GIS-based conservation software for land use planning

    Science.gov (United States)

    Rob Baldwin; Ryan Scherzinger; Don Lipscomb; Miranda Mockrin; Susan Stein

    2014-01-01

    Recent advances in planning and ecological software make it possible to conduct highly technical analyses to prioritize conservation investments and inform local land use planning. We review these tools, termed conservation planning tools, and assess the knowledge of a key set of potential users: the land use planning community. We grouped several conservation software...

  13. GIS BASED AQUIFER VULNERABILITY ASSESSMENT IN HANGZHOU-JIAXINGHUZHOU PLAIN, CHINA

    Directory of Open Access Journals (Sweden)

    Jean de Dieu Bazimenyera

    2014-01-01

    Full Text Available Hangzhou-Jiaxing-Huzhou plain is among the regions which faces the shortage of water due to its increasing population, industrialization, agriculture and domestic use; hence the high dependence on groundwater. In China, the exploitation of aquifers has been historically undertaken without proper concern for environmental impacts or even the concept of sustainable yield. In order to maintain basin aquifer as a source of water for the area, it is necessary to find out whether certain locations in this groundwater basin are susceptible to receive and transmit pollution, this is why the main objective of this research is to find out the groundwater vulnerable zones using Geographical Information System (GIS model in Hangzhou-Jiaxing-Huzhou plain. GIS was used to create groundwater vulnerability map by overlaying hydro-geological data. The input of the model was provided by the following seven data layers: Depth to water, net Recharge, Aquifer media, Soil media, Topography, Impact of vadose zone and hydraulic Conductivity. This study showed that Hangzhou-Jiaxing-Huzhou area is grouped into three categories: High vulnerable zone with 27.4% of the total area, moderate vulnerable zone which occupy the great part of that area 60.5% and low vulnerable zone with 12.1%. This research suggests first the prioritization of high vulnerable areas in order to prevent the further pollution to already polluted areas; next the frequent monitoring of vulnerable zones to monitor the changing level of pollutants; and finally suggests that this model can be an effective tool for local authorities who are responsible for managing groundwater resources in that area.

  14. GIS-Based Risk Assessment of Hail Disasters Affecting Cotton and Its Spatiotemporal Evolution in China

    Directory of Open Access Journals (Sweden)

    Lin Wang

    2016-02-01

    Full Text Available Understanding the spatiotemporal distribution pattern of hail disaster risk for cotton is crucial in mitigating hail disaster and promoting the sustainability of cotton farming. Based on such indexes as hail disaster frequency, spatiotemporal exposure, and vulnerability of cotton, we assess hail disaster risk for cotton, and analyze its spatiotemporal pattern and evolution in Mainland China from 1950 to 2009, supported by geographic information system (GIS. The following conclusions are drawn: (1 The proposed risk assessment method reveals the spatiotemporal difference of hail disaster risk for cotton at the county level. (2 Hail disaster risk for cotton is low in China, except for north of the North China Plain and the cotton-planting areas in Xinjiang Uygur Autonomous Region. From 1950 to 2009, hail disaster risk for cotton gradually increased. (3 The descending orders of hail disaster risk levels for cotton are bud stage, seedling stage, sowing and seeding stage, boll stage, and boll opening stage. The growth period with the highest risk varies across the cotton-planting areas. (4 The results of this paper are important for developing hail disaster prevention and reduction measures.

  15. Incorporating variations in pesticide catabolic activity into a GIS-based groundwater risk assessment

    International Nuclear Information System (INIS)

    Posen, Paulette; Lovett, Andrew; Hiscock, Kevin; Evers, Sarah; Ward, Rob; Reid, Brian

    2006-01-01

    The catabolic activity of incumbent microorganisms in soil samples of eleven dissimilar soil series was investigated, with respect to the herbicide isoproturon. Soils were collected from a 30 x 37 km area of river catchment to the north-west of London, England. Catabolic activity in each soil type during a 500 h assay was determined by 14 C-radiorespirometry. Results showed four soils that exhibited high levels of catabolic activity (33-44% mineralisation) while the remaining seven soils showed lower levels of catabolic activity (12-16% mineralisation). There was evidence to suggest that soils exhibiting high catabolic activity had low ( 14 C-radiorespirometric results were used to produce a GIS layer representing levels of catabolic activity for the dissimilar soils across the study area. This layer was combined with other GIS layers relating to pesticide attenuation, including soil organic carbon content, depth to groundwater and hydrogeology, to produce a map showing risk of groundwater contamination by isoproturon. The output from this approach was compared with output from an attenuation-only approach and differences appraised. Inclusion of the catabolism layer resulted in a lowering of risk in the model in 15% of the study area. Although there appears to be limited benefit in including pesticide catabolic activity in this regional-scale groundwater risk model, this type of addition could be useful in a site-specific risk assessment

  16. A GIS based assessment of hydropower potential in Hornád basin

    Directory of Open Access Journals (Sweden)

    �ofia Kuzevičová

    2013-12-01

    Full Text Available The issue of efficient use of hydropower, ones of the available renewable resources is currently in the process of sustainable development of each country, often addressing the issue. Incite multiple aspects. It is now seen just growing interest in exploiting the potential of hydropower. On the basis of active efforts are developed to map the total quantity of usability hydropower at basin level in Slovakia. GIS as a powerful and sophisticated tool for processing spatially localized information and offers support for renewable energy sources (not excluding the field of hydropower. Through the integration of spatial data allows assessing the real problems and thus contributing effectively to make rational decisions. Especially in the field of hydropower projects have GIS well founded importance. Of course is important to mention that the potential for hydroelectric power is useless without the operation of hydropower that converts water into electrical energy. For the needs of administrators of watercourses and operators of water systems, the proposed model can be an important tool for decision-making in relation to its implementation activities. Contribution to the design solutions for potential hydropower will address river basin Hornád.

  17. D GIS Based Evaluation of the Available Sight Distance to Assess Safety of Urban Roads

    Science.gov (United States)

    Bassani, M.; Grasso, N.; Piras, M.

    2015-08-01

    The available sight distance (ASD) in front of the driver to detect possible conflicts with unexpected obstacles is fundamental for traffic safety. In the last 20 years, road design software (RDS) has been continuously updated with dedicated modules to estimate ASD, thus assessing the quality of project from a safety point of view. Unfortunately, the evaluation of ASD still represents an issue in the case of existing road, and the object of discussion in the research community. To avoid problems related to the limitation associated with the use of digital terrain models typically employed in RDS, the Geographic Information Systems (GIS) software can use digital surface models (DSM) which are more flexible in the modelling of sight obstruction due to vegetation, street furniture, and vertical surfaces largely diffused in urbanized areas. The paper deals with the evaluation of GIS in the estimation of ASD in a typical urban road where the density of sight obstruction along the roadside is relatively high. The work explores the case study of a collector road in the city of Turin (Italy). Results confirm the potentiality of GIS software in capturing the complex morphology of the urban environment, thus confirming that GIS could become an important analysis tool for road engineers in the field of road safety. The investigation here described is part of the Pro-VISION Project (funded in 2014 by the Regione Piemonte, Italy).

  18. 3D GIS BASED EVALUATION OF THE AVAILABLE SIGHT DISTANCE TO ASSESS SAFETY OF URBAN ROADS

    Directory of Open Access Journals (Sweden)

    M. Bassani

    2015-08-01

    Full Text Available The available sight distance (ASD in front of the driver to detect possible conflicts with unexpected obstacles is fundamental for traffic safety. In the last 20 years, road design software (RDS has been continuously updated with dedicated modules to estimate ASD, thus assessing the quality of project from a safety point of view. Unfortunately, the evaluation of ASD still represents an issue in the case of existing road, and the object of discussion in the research community. To avoid problems related to the limitation associated with the use of digital terrain models typically employed in RDS, the Geographic Information Systems (GIS software can use digital surface models (DSM which are more flexible in the modelling of sight obstruction due to vegetation, street furniture, and vertical surfaces largely diffused in urbanized areas. The paper deals with the evaluation of GIS in the estimation of ASD in a typical urban road where the density of sight obstruction along the roadside is relatively high. The work explores the case study of a collector road in the city of Turin (Italy. Results confirm the potentiality of GIS software in capturing the complex morphology of the urban environment, thus confirming that GIS could become an important analysis tool for road engineers in the field of road safety. The investigation here described is part of the Pro-VISION Project (funded in 2014 by the Regione Piemonte, Italy.

  19. Assessment of aquifer intrinsic vulnerability using GIS based Drastic model in Sialkot area, Pakistan

    Directory of Open Access Journals (Sweden)

    Muhammad Saqib Khan

    2016-06-01

    Full Text Available The intrinsic vulnerability of a shallow aquifer of Sialkot is assessed using DRASTIC index method. The information required as input for all seven parameters, i.e. depth to water table, net recharge, aquifer media, soil media, topography, the impact of vadose zone and hydraulic conductivity data were collected from literature surveys and on field surveys. A cumulative vulnerability map was developed using the indices obtained as a result of DRASTIC methodology. The values obtained from DRASTIC model for the study area were between 112 and 151. The area was dominated by medium and moderate vulnerable zones covering an area of 446 km2 and 442 km2 respectively. An area of 79 km2 was covered by the low vulnerable zone while the high vulnerable zone encompassed a total area of 38 km2. Least covered area i-e., 09 km2 was found in the vicinity of the very high vulnerable zone. The validation of the DRASTIC model using the nitrate distribution revealed that very high and high indices have the lower percentage of reliability than of the low to moderate zones as compared with the nitrate distribution in the groundwater.

  20. GIS-based analysis of drinking-water supply structures: a module for microbial risk assessment.

    Science.gov (United States)

    Kistemann, T; Herbst, S; Dangendorf, F; Exner, M

    2001-05-01

    Water-related infections constitute an important health impact world-wide. A set of tools serving for Microbial Risk Assessment (MRA) of waterborne diseases should comprise the entire drinking-water management system and take into account the Hazard Analysis and Critical Control Point (HACCP) concept which provides specific Critical Control Points (CCPs) reflecting each step of drinking-water provision. A Geographical Information System (GIS) study concerning water-supply structure (WSS) was conducted in the Rhein-Berg District (North Rhine-Westphalia, Germany). As a result, suitability of the existing water databases HYGRIS (hydrological basis geo-information system) and TEIS (drinking-water recording and information system) for the development of a WSS-GIS module could be demonstrated. Spatial patterns within the integrated raw and drinking-water data can easily be uncovered by GIS-specific options. The application of WSS-GIS allows a rapid visualization and analysis of drinking-water supply structure and offers huge advantages concerning microbial monitoring of raw and drinking water as well as recognition and investigation of incidents and outbreaks. Increasing requests regarding health protection and health reporting, demands for a better outbreak management and water-related health impacts of global climate change are major challenges of future water management to be tackled with methods including spatial analysis. GIS is assumed to be a very useful tool to meet these requirements.

  1. Using geotypes for landslide hazard assessment and mapping: a coupled field and GIS-based method

    Science.gov (United States)

    Bilgot, S.; Parriaux, A.

    2009-04-01

    Switzerland is exceptionally subjected to landslides; indeed, about 10% of its area is considered as unstable. Making this observation, its Department of the Environment (BAFU) introduces in 1997 a method to realize landslide hazard maps. It is routinely used but, like most of the methods applied in Europe to map unstable areas, it is mainly based on the signs of previous or current phenomena (geomorphologic mapping, archive consultation, etc.) even though instabilities can appear where there is nothing to show that they existed earlier. Furthermore, the transcription from the geomorphologic map to the hazard map can vary according to the geologist or the geographer who realizes it: this method is affected by a certain lack of transparency. The aim of this project is to introduce the bedrock of a new method for landslide hazard mapping; based on instability predisposition assessment, it involves the designation of main factors for landslide susceptibility, their integration in a GIS to calculate a landslide predisposition index and the implementation of new methods to evaluate these factors; to be competitive, these processes have to be both cheap and quick. To identify the most important parameters to consider for assessing slope stability, we chose a large panel of topographic, geomechanic and hydraulic parameters and tested their importance by calculating safety factors on theoretical landslides using Geostudio 2007®; thus, we could determine that slope, cohesion, hydraulic conductivity and saturation play an important role in soil stability. After showing that cohesion and hydraulic conductivity of loose materials are strongly linked to their granulometry and plasticity index, we implemented two new field tests, one based on teledetection and one coupled sedimentometric and blue methylen test to evaluate these parameters. From these data, we could deduce approximated values of maximum cohesion and saturated hydraulic conductivity. The hydraulic conductivity of

  2. Geospatial Data Availability for Haiti: An Aid in the Development of GIS-Based Natural Resource Assessments for Conservation Planning.

    Science.gov (United States)

    Maya Quinones; William Gould; Carlos D. Rodriguez-Pedraza

    2007-01-01

    This report documents the type and source of geospatial data available for Haiti. It was compiled to serve as a resource for geographic information system (GIS)-based land management and planning. It will be useful for conservation planning, reforestation efforts, and agricultural extension projects. Our study indicates that there is a great deal of geospatial...

  3. AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT (AGWA): A GIS-BASED HYDROLOGIC MODELING TOOL FOR LANDSCAPE ASSESSMENT AND WATERSHED MANAGEMENT

    Science.gov (United States)

    The assessment of land use and land cover is an extremely important activity for contemporary land management. A large body of current literature suggests that human land-use practice is the most important factor influencing natural resource management and environmental condition...

  4. GIS-based Geospatial Infrastructure of Water Resource Assessment for Supporting Oil Shale Development in Piceance Basin of Northwestern Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Wei [Colorado School of Mines, Golden, CO (United States) Dept. of Geology and Geological Engineering; Minnick, Matthew D [Colorado School of Mines, Golden, CO (United States) Dept. of Geology and Geological Engineering; Mattson, Earl D [Idaho National Lab. (INL), Idaho Falls, ID (United States); Geza, Mengistu [Colorado School of Mines, Golden, CO (United States) Dept. of Cilvil and Environmental Engineering; Murray, Kyle E. [Univ. of Oklahoma, Norman, OK (United States) Oklahoma Geological Survey

    2015-04-01

    encountered many technical challenging and hasn't been done in the past for any oil shale basin. The database built during this study remains valuable for any other future studies involving oil shale and water resource management in the Piceance Basin. The methodology applied in the development of the GIS based Geospatial Infrastructure can be readily adapted for other professionals to develop database structure for other similar basins.

  5. Assessing the vulnerability of human and biological communities to changing ecosystem services using a GIS-based multi-criteria decision support tool

    Science.gov (United States)

    Villarreal, Miguel; Norman, Laura M.; Labiosa, William B.

    2012-01-01

    In this paper we describe an application of a GIS-based multi-criteria decision support web tool that models and evaluates relative changes in ecosystem services to policy and land management decisions. The Santa Cruz Watershed Ecosystem Portfolio (SCWEPM) was designed to provide credible forecasts of responses to ecosystem drivers and stressors and to illustrate the role of land use decisions on spatial and temporal distributions of ecosystem services within a binational (U.S. and Mexico) watershed. We present two SCWEPM sub-models that when analyzed together address bidirectional relationships between social and ecological vulnerability and ecosystem services. The first model employs the Modified Socio-Environmental Vulnerability Index (M-SEVI), which assesses community vulnerability using information from U.S. and Mexico censuses on education, access to resources, migratory status, housing situation, and number of dependents. The second, relating land cover change to biodiversity (provisioning services), models changes in the distribution of terrestrial vertebrate habitat based on multitemporal vegetation and land cover maps, wildlife habitat relationships, and changes in land use/land cover patterns. When assessed concurrently, the models exposed some unexpected relationships between vulnerable communities and ecosystem services provisioning. For instance, the most species-rich habitat type in the watershed, Desert Riparian Forest, increased over time in areas occupied by the most vulnerable populations and declined in areas with less vulnerable populations. This type of information can be used to identify ecological conservation and restoration targets that enhance the livelihoods of people in vulnerable communities and promote biodiversity and ecosystem health.

  6. A Geographic Information Systems (GIS)-based analysis of modern South African rodent distributions, habitat use, and environmental tolerances

    Science.gov (United States)

    Campbell, Timothy L; Lewis, Patrick J; Thies, Monte L; Williams, Justin K

    2012-01-01

    Goals of this study were to: (1) develop distributional maps of modern rodent genera throughout the countries of South Africa, Lesotho, and Swaziland by georeferencing museum specimens; (2) assess habitat preferences for genera by cross-referencing locality position with South African vegetation; and (3) identify mean annual precipitation and temperature range where the genera are located. Conterminous South Africa including the countries of Lesotho and Swaziland Digital databases of rodent museum specimens housed in the Ditsong National Museum of Natural History, South Africa (DM), and the Division of Mammals, National Museum of Natural History, Smithsonian Institution, United States (NMNH), were acquired and then sorted into a subset of specimens with associated coordinate data. The coordinate data were then used to develop distributional maps for the rodent genera present within the study area. Percent habitat occupation and descriptive statistics for six climatic variables were then determined for each genus by cross-referencing locality positions with vegetation and climatic maps. This report presents a series of maps illustrating the distribution of 35 rodent genera based on 19,471 geo-referenced specimens obtained from two major collections. Inferred habitat use by taxon is provided for both locality and specimen percent occurrence at three hierarchical habitat levels: biome, bioregion, and vegetation unit. Descriptive statistics for six climatic variables are also provided for each genus based on locality and specimen percent incidence. As rodent faunas are commonly used in paleoenvironmental reconstructions, an accurate assessment of rodent environmental tolerance ranges is necessary before confidence can be placed in an actualistic model. While the data presented here represent only a subset of the modern geographic distributions for many of the taxa examined, a wide range of environmental regimes are observed, suggesting that more research is necessary

  7. An integrated GIS-based approach in assessing carcinogenic risks via food-chain exposure in arsenic-affected groundwater areas.

    Science.gov (United States)

    Liang, Ching-Ping; Jang, Cheng-Shin; Liu, Chen-Wuing; Lin, Kao-Hung; Lin, Ming-Chao

    2010-04-01

    This study presented an integrated GIS-based approach for assessing potential carcinogenic risks via food-chain exposure of ingesting inorganic arsenic (As) in aquacultural tilapia, milkfish, mullet, and clam in the As-affected groundwater areas. To integrate spatial information, geographic information system (GIS) was adopted to combine polygon-shaped features of aquacultural species with cell-shaped features of As contamination in groundwater. Owing to sparse measured data, Monte Carlo simulation and sequential indicator simulation were used to characterize the uncertainty of assessed parameters. Target cancer risks (TRs) of ingesting As contents at fish ponds were spatially mapped to assess potential risks to human health. The analyzed results reveal that clam farmed at the western coastal ponds and milkfish farmed at the southwestern coastal ponds have high risks to human health, whereas tilapia cultivated mainly at the inland ponds only has high risks at the 95th percentile of TR. Mullet in general has low risks to human health. Moreover, to decrease risks, this study suggests reducing the use of As-affected groundwater at clam and milkfish ponds due to high bioconcentration factor (BCF) of clam and inorganic As accumulation ratio of milkfish. The integrated GIS-based approach can provide fishery administrators with an effective management strategy at specific fish ponds with high risks to human health.

  8. A GIS-based human health risk assessment for urban green space planning--an example from Grugliasco (Italy).

    Science.gov (United States)

    Poggio, Laura; Vrscaj, Borut

    2009-11-15

    The need to develop approaches for risk-based management of soil contamination, as well as the integration of the assessment of the human health risk (HHR) due to the soil contamination in the urban planning procedures has been the subject of recent attention of scientific literature and policy makers. The spatial analysis of environmental data offers multiple advantages for studying soil contamination and HHR assessment, facilitating the decision making process. The aim of this study was to explore the possibilities and benefits of spatial implementation of a quantitative HHR assessment methodology for a planning case in a typical urban environment where the soil is contaminated. The study area is located in the city of Grugliasco a part of the Turin (Italy) metropolitan area. The soils data were derived from a site specific soil survey and the land-use data from secondary sources. In the first step the soil contamination data were geo-statistically analysed and a spatial soil contamination data risk modelling procedure designed. In order to spatially assess the HHR computer routines were developed using GIS raster tools. The risk was evaluated for several different land uses for the planned naturalistic park area. The HHR assessment indicated that the contamination of soils with heavy metals in the area is not sufficient to induce considerable health problems due to typical human behaviour within the variety of urban land uses. An exception is the possibility of direct ingestion of contaminated soil which commonly occurs in playgrounds. The HHR evaluation in a planning case in the Grugliasco Municipality confirms the suitability of the selected planning option. The construction of the naturalistic park presents one solution for reducing the impacts of soil contamination on the health of citizens. The spatial HHR evaluation using GIS techniques is a diagnostic procedure for assessing the impacts of urban soil contamination, with which one can verify planning

  9. GIS-Based Suitability Model for Assessment of Forest Biomass Energy Potential in a Region of Portugal

    Science.gov (United States)

    Quinta-Nova, Luis; Fernandez, Paulo; Pedro, Nuno

    2017-12-01

    This work focuses on developed a decision support system based on multicriteria spatial analysis to assess the potential for generation of biomass residues from forestry sources in a region of Portugal (Beira Baixa). A set of environmental, economic and social criteria was defined, evaluated and weighted in the context of Saaty’s analytic hierarchies. The best alternatives were obtained after applying Analytic Hierarchy Process (AHP). The model was applied to the central region of Portugal where forest and agriculture are the most representative land uses. Finally, sensitivity analysis of the set of factors and their associated weights was performed to test the robustness of the model. The proposed evaluation model provides a valuable reference for decision makers in establishing a standardized means of selecting the optimal location for new biomass plants.

  10. Soil quality assessment using GIS-based chemometric approach and pollution indices: Nakhlak mining district, Central Iran.

    Science.gov (United States)

    Moore, Farid; Sheykhi, Vahideh; Salari, Mohammad; Bagheri, Adel

    2016-04-01

    This paper is a comprehensive assessment of the quality of soil in the Nakhlak mining district in Central Iran with special reference to potentially toxic metals. In this regard, an integrated approach involving geostatistical, correlation matrix, pollution indices, and chemical fractionation measurement is used to evaluate selected potentially toxic metals in soil samples. The fractionation of metals indicated a relatively high variability. Some metals (Mo, Ag, and Pb) showed important enrichment in the bioavailable fractions (i.e., exchangeable and carbonate), whereas the residual fraction mostly comprised Sb and Cr. The Cd, Zn, Co, Ni, Mo, Cu, and As were retained in Fe-Mn oxide and oxidizable fractions, suggesting that they may be released to the environment by changes in physicochemical conditions. The spatial variability patterns of 11 soil heavy metals (Ag, As, Cd, Co, Cr, Cu, Mo, Ni, Pb, Sb, and Zn) were identified and mapped. The results demonstrated that Ag, As, Cd, Mo, Cu, Pb, Sb, and Zn pollution are associated with mineralized veins and mining operations in this area. Further environmental monitoring and remedial actions are required for management of soil heavy metals in the study area. The present study not only enhanced our knowledge regarding soil pollution in the study area but also introduced a better technique to analyze pollution indices by multivariate geostatistical methods.

  11. GIS-based regionalized life cycle assessment: how big is small enough? Methodology and case study of electricity generation.

    Science.gov (United States)

    Mutel, Christopher L; Pfister, Stephan; Hellweg, Stefanie

    2012-01-17

    We describe a new methodology for performing regionalized life cycle assessment and systematically choosing the spatial scale of regionalized impact assessment methods. We extend standard matrix-based calculations to include matrices that describe the mapping from inventory to impact assessment spatial supports. Uncertainty in inventory spatial data is modeled using a discrete spatial distribution function, which in a case study is derived from empirical data. The minimization of global spatial autocorrelation is used to choose the optimal spatial scale of impact assessment methods. We demonstrate these techniques on electricity production in the United States, using regionalized impact assessment methods for air emissions and freshwater consumption. Case study results show important differences between site-generic and regionalized calculations, and provide specific guidance for future improvements of inventory data sets and impact assessment methods.

  12. A GIS-based multi-source and multi-box modeling approach (GMSMB) for air pollution assessment--a North American case study.

    Science.gov (United States)

    Wang, Bao-Zhen; Chen, Zhi

    2013-01-01

    This article presents a GIS-based multi-source and multi-box modeling approach (GMSMB) to predict the spatial concentration distributions of airborne pollutant on local and regional scales. In this method, an extended multi-box model combined with a multi-source and multi-grid Gaussian model are developed within the GIS framework to examine the contributions from both point- and area-source emissions. By using GIS, a large amount of data including emission sources, air quality monitoring, meteorological data, and spatial location information required for air quality modeling are brought into an integrated modeling environment. It helps more details of spatial variation in source distribution and meteorological condition to be quantitatively analyzed. The developed modeling approach has been examined to predict the spatial concentration distribution of four air pollutants (CO, NO(2), SO(2) and PM(2.5)) for the State of California. The modeling results are compared with the monitoring data. Good agreement is acquired which demonstrated that the developed modeling approach could deliver an effective air pollution assessment on both regional and local scales to support air pollution control and management planning.

  13. Susceptibility assessment of landslides: A comparison of two GIS-based methods in the region of Al Hoceima (Eastern Rif, Morocco.

    Directory of Open Access Journals (Sweden)

    El Fahchouch A. N.

    2018-01-01

    Full Text Available The evaluation of the degree of susceptibility to landslides has become a major concern in mountainous areas, it is a key component of manager policies efforts in disaster prevention, mitigate risk and manage the consequences. The region of Al Hoceima is one of most mountain regions in Morocco, and is highly exposed landslides events. For this reason, the area was selected in order to determine its susceptibility to landslides using two methods. The purpose of this study is to evaluate and to compare the results of multivariate (logical regression and bivariate (landslide susceptibility methods in Geographical Information System (GIS based landslide susceptibility assessment procedures. In order to achieve this goal, the selected methods were compared by the Seed Cell Area Indexes (SCAI and by the spatial locations of the resultant susceptibility pixels. We found that both of the methods converge in 80% of the area; however, the weighting algorithm in the bivariate technique (landslide susceptibility method had some severe deficiencies, as the resultant hazard classes in overweighed areas did not converge with the factual landslide inventory map. The result of the multivariate technique (logical regression was more sensitive to the different local features of the test zone and it resulted in more accurate and homogeneous susceptibility maps. This information may have direct applications in landslides susceptibility research programs and can assist decision-makers in the implementation of preventive management strategies in the most sensitive areas.

  14. A Multicriteria GIS-Based Assessment to Optimize Biomass Facility Sites with Parallel Environment—A Case Study in Spain

    Directory of Open Access Journals (Sweden)

    Jin Su Jeong

    2017-12-01

    Full Text Available Optimizing a biomass facility site is a critical concern that is currently receiving an increased attention because of geographically spread biomass feedstock. This research presents a multicriteria GIS assessment with Weighted Linear Combination (WLC (most suitable areas and a sensitivity analysis (implementation strategies applied to various disciplines using suitable criteria to optimize a biomass facility location in the context of renewable energies respecting the environment. The analyses of results with twelve criteria show the most suitable areas (9.25% and constraints in a case study in Extremadura (Spain, where forest and agriculture are typical for land uses. Thus, the sensitivity analysis demonstrates the insight of the most influential criteria for supporting energy planning decisions. Therefore, this assessment could be used in studies to verify suitable biomass plants sites with corresponding geographical and spatial circumstances and available spatial data necessary in various governmental and industrial sectors.

  15. Task 2 Report - A GIS-Based Technical Potential Assessment of Domestic Energy Resources for Electricity Generation.

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Grue, Nicholas W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Rosenlieb, Evan [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-03-14

    The purpose of this report is to support the Lao Ministry of Energy and Mines in assessing the technical potential of domestic energy resources for utility scale electricity generation in the Lao PDR. Specifically, this work provides assessments of technical potential, and associated maps of developable areas, for energy technologies of interest. This report details the methodology, assumptions, and datasets employed in this analysis to provide a transparent, replicable process for future analyses. The methodology and results presented are intended to be a fundamental input to subsequent decision making and energy planning-related analyses. This work concentrates on domestic energy resources for utility-scale electricity generation and considers solar photovoltaic, wind, biomass, and coal resources. This work does not consider potentially imported energy resources (e.g., natural gas) or domestic energy resources that are not present in sufficient quantity for utility-scale generation (e.g., geothermal resources). A technical potential assessment of hydropower resources is currently not feasible due to the absence of required data including site-level assessments of multiple characteristics (e.g., geology environment and access) as well as spatial data on estimated non-exploited hydropower resources. This report is the second output of the Energy Alternatives Study for the Lao PDR, a collaboration led by the Lao Ministry of Energy and Mines and the United States Agency for International Development under the auspices of the Smart Infrastructure for the Mekong program. The Energy Alternatives Study is composed of five successive tasks that collectively support the project's goals. This work is focused on Task 2 - Assess technical potential of domestic energy resources for electricity generation. The work was carried out by a team from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in collaboration with the Lao Ministry of Energy

  16. Flood Hazard Assessment along the Western Regions of Saudi Arabia using GIS-based Morphometry and Remote Sensing Techniques

    KAUST Repository

    Shi, Qianwen

    2014-12-01

    Flash flooding, as a result of excessive rainfall in a short period, is considered as one of the worst environmental hazards in arid regions. Areas located in the western provinces of Saudi Arabia have experienced catastrophic floods. Geomorphologic evaluation of hydrographic basins provides necessary information to define basins with flood hazard potential in arid regions, especially where long-term field observations are scarce and limited. Six large basins (from North to South: Yanbu, Rabigh, Khulais, El-Qunfza, Baish and Jizan) were selected for this study because they have large surface areas and they encompass high capacity dams at their downstream areas. Geographic Information System (GIS) and remote sensing techniques were applied to conduct detailed morphometric analysis of these basins. The six basins were further divided into 203 sub-basins based on their drainage density. The morphometric parameters of the six basins and their associated 203 sub-basins were calculated to estimate the degree of flood hazard by combining normalized values of these parameters. Thus, potential flood hazard maps were produced from the estimated hazard degree. Furthermore, peak runoff discharge of the six basins and sub-basins were estimated using the Snyder Unit Hydrograph and three empirical models (Nouh’s model, Farquharson’s model and Al-Subai’s model) developed for Saudi Arabia. Additionally, recommendations for flood mitigation plans and water management schemes along these basins were further discussed.

  17. A GIS-based vulnerability assessment of brine contamination to aquatic resources from oil and gas development in eastern Sheridan County, Montana.

    Science.gov (United States)

    Preston, Todd M; Chesley-Preston, Tara L; Thamke, Joanna N

    2014-02-15

    Water (brine) co-produced with oil in the Williston Basin is some of the most saline in the nation. The Prairie Pothole Region (PPR), characterized by glacial sediments and numerous wetlands, covers the northern and eastern portion of the Williston Basin. Sheridan County, Montana, lies within the PPR and has a documented history of brine contamination. Surface water and shallow groundwater in the PPR are saline and sulfate dominated while the deeper brines are much more saline and chloride dominated. A Contamination Index (CI), defined as the ratio of chloride concentration to specific conductance in a water sample, was developed by the Montana Bureau of Mines and Geology to delineate the magnitude of brine contamination in Sheridan County. Values >0.035 indicate contamination. Recently, the U.S. Geological Survey completed a county level geographic information system (GIS)-based vulnerability assessment of brine contamination to aquatic resources in the PPR of the Williston Basin based on the age and density of oil wells, number of wetlands, and stream length per county. To validate and better define this assessment, a similar approach was applied in eastern Sheridan County at a greater level of detail (the 2.59 km(2) Public Land Survey System section grid) and included surficial geology. Vulnerability assessment scores were calculated for the 780 modeled sections and these scores were divided into ten equal interval bins representing similar probabilities of contamination. Two surface water and two groundwater samples were collected from the section with the greatest acreage of Federal land in each bin. Nineteen of the forty water samples, and at least one water sample from seven of the ten selected sections, had CI values indicating contamination. Additionally, CI values generally increased with increasing vulnerability assessment score, with a stronger correlation for groundwater samples (R(2)=0.78) than surface water samples (R(2)=0.53). Copyright © 2013

  18. A GIS based national assessment of algal bio-oil production potential through flue gas and wastewater co-utilization

    International Nuclear Information System (INIS)

    Orfield, Nolan D.; Keoleian, Gregory A.; Love, Nancy G.

    2014-01-01

    The high theoretical productivity of microalgae makes it a promising energy crop, but economically viable large-scale production facilities have yet to emerge. Coupling algae cultivation ponds with flue gas emissions from power utilities to provide carbon dioxide and municipal wastewater to provide nutrients has been recommended as a solution. This flue gas and wastewater co-utilization (FWC) strategy not only reduces the upstream impacts and costs associated with providing inputs, but also provides a credit for wastewater treatment, a service currently required to reduce production costs to a viable level. This study provides the first national assessment of the potential for producing algal bio-oil in the United States using FWC. Spatial-temporal algae growth was simulated using solar radiation and temperature data to calculate the average annual algae yield for any location, which significantly impacts feasibility. The results of this model were integrated into a geospatial analysis which establishes the economically viable bio-oil production potential of FWC by accounting for the relative abundance of the input resources and their proximity. At most, 1.7 billion liters of bio-oil could be produced annually in a manner economically competitive with crude oil prices of $80 per barrel. The amount of nutrients in wastewater limits yields to 20.5 L of bio-oil per capita annually, and climatic constraints further reduce this potential by nearly 60%. Carbon dioxide constraints play a negligible role. Although the bio-oil production potential of FWC is relatively small, it does provide an opportunity to increase national biofuel output while providing a needed service. - Highlights: • Spatial-temporal algae growth was simulated using historical climate data. • A geospatial overlay analysis was used to assess national production potential. • Nutrient availability in wastewater is most limiting. • At most, 1.7 billion liters of algal biofuel per year could be

  19. Using a VGI and GIS-Based Multicriteria Approach for Assessing the Potential of Rural Tourism in Extremadura (Spain

    Directory of Open Access Journals (Sweden)

    Abel González-Ramiro

    2016-11-01

    Full Text Available Extremadura (Spain, being one of the less-developed EU regions, is also eligible for European funds, including those related with the development of tourism activities in rural areas. To assess the spatial distribution of rural tourism potential (RTP, a methodological approach was followed by combining the synergetic use of geographic information systems (GIS and the analytical hierarchical process (AHP. For the evaluation model, six factors were examined and hierarchized by a panel of eighteen experts: tourism accommodation offer, activities in natural areas, gastronomic offer, cultural activities, bath offer in natural environments, and activities in active tourism. These factors were then decomposed into thirty-two evaluation criteria and the relative importance of their weights was estimated using pairwise judgments. Using publicly available data and volunteered geographic information (VGI platforms, the related spatial and non-spatial data were collected, collated, and standardized, employing appropriate tools developed with open-source GIS software. The results, represented by a series of intensity maps, indicate the RTP scores, highlight the strengths and weaknesses in each county, and could serve as a planning tool for public and/or private investments.

  20. GIS-based assessment of the biomass potential from phytoremediation of contaminated agricultural land in the Campine region in Belgium

    International Nuclear Information System (INIS)

    Schreurs, Eloi; Voets, Thomas; Thewys, Theo

    2011-01-01

    Dedicated energy crop cultivation is expected to be the prevalent form of biomass production for reaching renewable energy targets set by the European Union. However, there are some concerns with regard to its sustainability. This study demonstrates how this problem can be evaded by applying phytoremediation, i.e. the use of plants to remove pollutants from moderately contaminated soils. By selecting the appropriate plants a considerable biomass flow is produced without taking in scarce agricultural land, while simultaneously remediating the soil to levels of contamination below threshold values. Since phytoremediation is only applicable within a limited range of soil pollutant concentrations, the outer values of this range have to be determined at first. Subsequently, a Geographic Information System (GIS) is needed to perform further analyses. The contamination in the region is predicted using GIS, after which the agricultural area is determined that can be committed to energy crop cultivation. This way, the biomass potential and the resulting bioenergy potential from phytoremediation can be assessed. In this paper the Campine region in Belgium, a region diffusely contaminated with heavy metals like cadmium (Cd), is examined. It is illustrated that more than 2000 ha of agricultural land hold Cd concentrations exceeding guide values set by the Flemish Government. However, a large majority of these soils can be remediated by phytoremediation within a reasonable time span of 42 years. Concurrently, a significant amount of biomass is supplied for renewable energy production. -- Highlights: → More than 2000 ha of agricultural land have elevated Cd concentrations. → 87% can be remediated within 42 years by phytoremediation. → Annual biomass flow of 19 067 Mg for 21 years.

  1. A comparative assessment of GIS-based data mining models and a novel ensemble model in groundwater well potential mapping

    Science.gov (United States)

    Naghibi, Seyed Amir; Moghaddam, Davood Davoodi; Kalantar, Bahareh; Pradhan, Biswajeet; Kisi, Ozgur

    2017-05-01

    In recent years, application of ensemble models has been increased tremendously in various types of natural hazard assessment such as landslides and floods. However, application of this kind of robust models in groundwater potential mapping is relatively new. This study applied four data mining algorithms including AdaBoost, Bagging, generalized additive model (GAM), and Naive Bayes (NB) models to map groundwater potential. Then, a novel frequency ratio data mining ensemble model (FREM) was introduced and evaluated. For this purpose, eleven groundwater conditioning factors (GCFs), including altitude, slope aspect, slope angle, plan curvature, stream power index (SPI), river density, distance from rivers, topographic wetness index (TWI), land use, normalized difference vegetation index (NDVI), and lithology were mapped. About 281 well locations with high potential were selected. Wells were randomly partitioned into two classes for training the models (70% or 197) and validating them (30% or 84). AdaBoost, Bagging, GAM, and NB algorithms were employed to get groundwater potential maps (GPMs). The GPMs were categorized into potential classes using natural break method of classification scheme. In the next stage, frequency ratio (FR) value was calculated for the output of the four aforementioned models and were summed, and finally a GPM was produced using FREM. For validating the models, area under receiver operating characteristics (ROC) curve was calculated. The ROC curve for prediction dataset was 94.8, 93.5, 92.6, 92.0, and 84.4% for FREM, Bagging, AdaBoost, GAM, and NB models, respectively. The results indicated that FREM had the best performance among all the models. The better performance of the FREM model could be related to reduction of over fitting and possible errors. Other models such as AdaBoost, Bagging, GAM, and NB also produced acceptable performance in groundwater modelling. The GPMs produced in the current study may facilitate groundwater exploitation

  2. Comparative assessment of GIS-based methods and metrics for estimating long-term exposures to air pollution

    Science.gov (United States)

    Gulliver, John; de Hoogh, Kees; Fecht, Daniela; Vienneau, Danielle; Briggs, David

    2011-12-01

    The development of geographical information system techniques has opened up a wide array of methods for air pollution exposure assessment. The extent to which these provide reliable estimates of air pollution concentrations is nevertheless not clearly established. Nor is it clear which methods or metrics should be preferred in epidemiological studies. This paper compares the performance of ten different methods and metrics in terms of their ability to predict mean annual PM 10 concentrations across 52 monitoring sites in London, UK. Metrics analysed include indicators (distance to nearest road, traffic volume on nearest road, heavy duty vehicle (HDV) volume on nearest road, road density within 150 m, traffic volume within 150 m and HDV volume within 150 m) and four modelling approaches: based on the nearest monitoring site, kriging, dispersion modelling and land use regression (LUR). Measures were computed in a GIS, and resulting metrics calibrated and validated against monitoring data using a form of grouped jack-knife analysis. The results show that PM 10 concentrations across London show little spatial variation. As a consequence, most methods can predict the average without serious bias. Few of the approaches, however, show good correlations with monitored PM 10 concentrations, and most predict no better than a simple classification based on site type. Only land use regression reaches acceptable levels of correlation ( R2 = 0.47), though this can be improved by also including information on site type. This might therefore be taken as a recommended approach in many studies, though care is needed in developing meaningful land use regression models, and like any method they need to be validated against local data before their application as part of epidemiological studies.

  3. A new GIS-based tsunami risk evaluation: MeTHuVA (METU tsunami human vulnerability assessment) at Yenikapı, Istanbul

    Science.gov (United States)

    Cankaya, Zeynep Ceren; Suzen, Mehmet Lutfi; Yalciner, Ahmet Cevdet; Kolat, Cagil; Zaytsev, Andrey; Aytore, Betul

    2016-07-01

    Istanbul is a mega city with various coastal utilities located on the northern coast of the Sea of Marmara. At Yenikapı, there are critical vulnerable coastal utilities, structures, and active metropolitan life. Fishery ports, commercial ports, small craft harbors, passenger terminals of intercity maritime transportation, waterfront commercial and/or recreational structures with residential/commercial areas and public utility areas are some examples of coastal utilization that are vulnerable to marine disasters. Therefore, the tsunami risk in the Yenikapı region is an important issue for Istanbul. In this study, a new methodology for tsunami vulnerability assessment for areas susceptible to tsunami is proposed, in which the Yenikapı region is chosen as a case study. Available datasets from the Istanbul Metropolitan Municipality and Turkish Navy are used as inputs for high-resolution GIS-based multi-criteria decision analysis (MCDA) evaluation of tsunami risk in Yenikapı. Bathymetry and topography database is used for high-resolution tsunami numerical modeling where the tsunami hazard, in terms of coastal inundation, is deterministically computed using the NAMI DANCE numerical code, considering earthquake worst case scenarios. In order to define the tsunami human vulnerability of the region, two different aspects, vulnerability at location and evacuation resilience maps were created using the analytical hierarchical process (AHP) method of MCDA. A vulnerability at location map is composed of metropolitan use, geology, elevation, and distance from shoreline layers, whereas an evacuation resilience map is formed by slope, distance within flat areas, distance to buildings, and distance to road networks layers. The tsunami risk map is then computed by the proposed new relationship which uses flow depth maps, vulnerability at location maps, and evacuation resilience maps.

  4. Cloud GIS Based Watershed Management

    Science.gov (United States)

    Bediroğlu, G.; Colak, H. E.

    2017-11-01

    In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

  5. CLOUD GIS BASED WATERSHED MANAGEMENT

    Directory of Open Access Journals (Sweden)

    G. Bediroğlu

    2017-11-01

    Full Text Available In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service and DAAS (Data as a Service. We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries. We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes, Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

  6. Investigating impacts of natural and human-induced environmental changes on hydrological processes and flood hazards using a GIS-based hydrological/hydraulic model and remote sensing data

    Science.gov (United States)

    Wang, Lei

    Natural and human-induced environmental changes have been altering the earth's surface and hydrological processes, and thus directly contribute to the severity of flood hazards. To understand these changes and their impacts, this research developed a GIS-based hydrological and hydraulic modeling system, which incorporates state-of-the-art remote sensing data to simulate flood under various scenarios. The conceptual framework and technical issues of incorporating multi-scale remote sensing data have been addressed. This research develops an object-oriented hydrological modeling framework. Compared with traditional lumped or cell-based distributed hydrological modeling frameworks, the object-oriented framework allows basic spatial hydrologic units to have various size and irregular shape. This framework is capable of assimilating various GIS and remotely-sensed data with different spatial resolutions. It ensures the computational efficiency, while preserving sufficient spatial details of input data and model outputs. Sensitivity analysis and comparison of high resolution LIDAR DEM with traditional USGS 30m resolution DEM suggests that the use of LIDAR DEMs can greatly reduce uncertainty in calibration of flow parameters in the hydrologic model and hence increase the reliability of modeling results. In addition, subtle topographic features and hydrologic objects like surface depressions and detention basins can be extracted from the high resolution LiDAR DEMs. An innovative algorithm has been developed to efficiently delineate surface depressions and detention basins from LiDAR DEMs. Using a time series of Landsat images, a retrospective analysis of surface imperviousness has been conducted to assess the hydrologic impact of urbanization. The analysis reveals that with rapid urbanization the impervious surface has been increased from 10.1% to 38.4% for the case study area during 1974--2002. As a result, the peak flow for a 100-year flood event has increased by 20% and

  7. Open Source GIS based integrated watershed management

    Science.gov (United States)

    Byrne, J. M.; Lindsay, J.; Berg, A. A.

    2013-12-01

    Optimal land and water management to address future and current resource stresses and allocation challenges requires the development of state-of-the-art geomatics and hydrological modelling tools. Future hydrological modelling tools should be of high resolution, process based with real-time capability to assess changing resource issues critical to short, medium and long-term enviromental management. The objective here is to merge two renowned, well published resource modeling programs to create an source toolbox for integrated land and water management applications. This work will facilitate a much increased efficiency in land and water resource security, management and planning. Following an 'open-source' philosophy, the tools will be computer platform independent with source code freely available, maximizing knowledge transfer and the global value of the proposed research. The envisioned set of water resource management tools will be housed within 'Whitebox Geospatial Analysis Tools'. Whitebox, is an open-source geographical information system (GIS) developed by Dr. John Lindsay at the University of Guelph. The emphasis of the Whitebox project has been to develop a user-friendly interface for advanced spatial analysis in environmental applications. The plugin architecture of the software is ideal for the tight-integration of spatially distributed models and spatial analysis algorithms such as those contained within the GENESYS suite. Open-source development extends knowledge and technology transfer to a broad range of end-users and builds Canadian capability to address complex resource management problems with better tools and expertise for managers in Canada and around the world. GENESYS (Generate Earth Systems Science input) is an innovative, efficient, high-resolution hydro- and agro-meteorological model for complex terrain watersheds developed under the direction of Dr. James Byrne. GENESYS is an outstanding research and applications tool to address

  8. A comparison between self-reported and GIS-based proxies of residential exposure to environmental pollution in a case-control study on lung cancer.

    Science.gov (United States)

    Cordioli, M; Ranzi, A; Freni Sterrantino, A; Erspamer, L; Razzini, G; Ferrari, U; Gatti, M G; Bonora, K; Artioli, F; Goldoni, C A; Lauriola, P

    2014-06-01

    In epidemiological studies both questionnaire results and GIS modeling have been used to assess exposure to environmental risk factors. Nevertheless, few studies have used both these techniques to evaluate the degree of agreement between different exposure assessment methodologies. As part of a case-control study on lung cancer, we present a comparison between self-reported and GIS-derived proxies of residential exposure to environmental pollution. 649 subjects were asked to fill out a questionnaire and give information about residential history and perceived exposure. Using GIS, for each residence we evaluated land use patterns, proximity to major roads and exposure to industrial pollution. We then compared the GIS exposure-index values among groups created on the basis of questionnaire responses. Our results showed a relatively high agreement between the two methods. Although none of these methods is the "exposure gold standard", understanding similarities, weaknesses and strengths of each method is essential to strengthen epidemiological evidence. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. GIS-based environmental analysis of fox and canine lungworm distribution: an epidemiological study of Angiostrongylus vasorum and Crenosoma vulpis in red foxes from Slovakia.

    Science.gov (United States)

    Čabanová, Viktória; Miterpáková, Martina; Druga, Michal; Hurníková, Zuzana; Valentová, Daniela

    2018-02-01

    Over a period of intervening years, the distribution of two canine cardiopulmonary metastrongylid nematodes, Angiostrongylus vasorum and Crenosoma vulpis, has been recognised in Central Europe. Here, we report the first epidemiological research conducted in red foxes from Slovakia and the potential influence of selected environmental variables on the parasites' occurrence, quantified by logistic regression. The environmental models revealed that distribution of C. vulpis is not significantly influenced by any environmental variables, and the parasite is present in the whole area under study. Models for A. vasorum revealed some weak influence of environmental variables, as it tends to occur in drier areas with lower proportion of forest. Moreover, A. vasorum shows a typical spatial clustering and occurs in endemic foci identified mainly in the eastern part of Slovakia. A cluster of A. vasorum infection foci was also found in the north-eastern region, where the average winter air temperature regularly falls below - 10 °C.

  10. A GIS-based approach to spatio-temporal analysis of environmental pollution in urban areas: A case study of Prague's environment extended by LIDAR data

    Czech Academy of Sciences Publication Activity Database

    Matějíček, L.; Engst, P.; Jaňour, Zbyněk

    2006-01-01

    Roč. 199, č. 3 (2006), s. 261-277 ISSN 0304-3800 R&D Projects: GA ČR GA205/02/0898 Institutional research plan: CEZ:AV0Z20760514 Keywords : environmental pollution * ordinary kriging * GIS Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 1.888, year: 2006 www.elsevier.com/locate/ecolmodel

  11. A Comparison of Vector and Raster GIS Methods for Calculating Landscape Metrics Used in Environmental Assessments

    Science.gov (United States)

    Timothy G. Wade; James D. Wickham; Maliha S. Nash; Anne C. Neale; Kurt H. Riitters; K. Bruce Jones

    2003-01-01

    AbstractGIS-based measurements that combine native raster and native vector data are commonly used in environmental assessments. Most of these measurements can be calculated using either raster or vector data formats and processing methods. Raster processes are more commonly used because they can be significantly faster computationally...

  12. Rapid GIS-based profiling of West Nile virus transmission: defining environmental factors associated with an urbansuburban outbreak in Northeast Ohio, USA

    Directory of Open Access Journals (Sweden)

    A. Desiree LaBeaud

    2008-05-01

    Full Text Available Human West Nile virus (WNV infection was first detected in Cuyahoga county, Ohio, USA, in 2002. During that year’s extensive epidemic/epizootic among non-immune human and bird populations, the county experienced 155 cases of severe human West Nile neurological disease (WNND, incidence = 11.1 cases/100,000, with 11 fatalities. Structured serosurveys indicated that 1.9%, or ~ 26,000 of county residents (population = 1,372,303 were infected that year. In early 2003, in order to better focus monitoring and control efforts, we used a geographical information system (GIS approach and spatial statistical analysis to identify the association of environmental factors and human population structure with the observed local risk for WNV transmission. Within the varied range of urban/suburban/ rural habitats across the 1186 km2 county, exploratory analysis indicated significant clustering of WNND risk in inner-ring suburbs. Subsequent discriminant factor analysis based on inputs of census and land-use/land cover data was found to effectively classify sub-areas of the county having low, medium and high WNV risk. On a 1036 ha quadrat scale of resolution, higher risk of human infection was significantly associated with higher-income areas, increased fractionation of habitat and older housing, while it was negatively associated with areas of agricultural land, wetland or forest. The areal classification of WNV transmission risk has been validated over time through detection of increased local Culex spp. mosquito density (2002-2006, and increased frequency of WNV positive mosquito pools within the medium- and high-risk quadrats. This timely working identification of the transmission scale effectively focused control interventions against newly invasive WNV in a complex North American habitat.

  13. Biodiversity in environmental assessment-current practice and tools for prediction

    International Nuclear Information System (INIS)

    Gontier, Mikael; Balfors, Berit; Moertberg, Ulla

    2006-01-01

    Habitat loss and fragmentation are major threats to biodiversity. Environmental impact assessment and strategic environmental assessment are essential instruments used in physical planning to address such problems. Yet there are no well-developed methods for quantifying and predicting impacts of fragmentation on biodiversity. In this study, a literature review was conducted on GIS-based ecological models that have potential as prediction tools for biodiversity assessment. Further, a review of environmental impact statements for road and railway projects from four European countries was performed, to study how impact prediction concerning biodiversity issues was addressed. The results of the study showed the existing gap between research in GIS-based ecological modelling and current practice in biodiversity assessment within environmental assessment

  14. Assessing geochemical influence of traffic and other vehicle-related activities on heavy metal contamination in urban soils of Kerman city, using a GIS-based approach.

    Science.gov (United States)

    Hamzeh, Mohammad Ali; Aftabi, Alijan; Mirzaee, Mohammad

    2011-12-01

    Heavy metal pollution caused by traffic activities is increasingly becoming a great threat to urban environmental quality and human health. In this paper, soils of Kerman urban and suburban areas were collected to assess the potential effects of traffic and other vehicle-related pollution by heavy metal accumulation in soils. Eighty-six samples were collected along streets and from residential and rural sectors, as well as vehicle-related workshops from depth of 0-5 and 15-20 cm and analyzed by flame atomic absorption spectrometry (FAAS) for heavy metals (Cd, Cr, Cu, Pb, Sn and Zn), as well as major elements (Al, Ca, Fe and Mn). Several hot-spot areas were identified in the composite geochemical maps produced based on Geographical Information System (GIS) technology. The majority of the hot-spot areas were identified to be vehicle-related workshops, fuel stations and road junctions. The most polluted hot-spot in the study area was located in soils close to a car battery processing workshop in the southwestern part of Kerman city, with concentrations of Cd (0.32 mg/kg), Cr (169 mg/kg), Cu (250 mg/kg), Pb (5,780 mg/kg), Sn (27.2 mg/kg) and Zn (178 mg/kg) of 1, 8.5, 8.3, 230, 13.5 and 3 times more than the relevant mean concentrations in natural soils, respectively. Traffic pollution has resulted in significant accumulation of heavy metals in soils and sediments, and that level of accumulation varied remarkably among elements. Based on X-ray diffraction analysis, most parts of soils and sediments of the Kerman basement consist of calcite and clay minerals. Abundance of clay minerals and medium to alkaline pH causes low mobility of heavy metals in soils of Kerman.

  15. Geo-environmental indicators in strategic environmental assessment

    Directory of Open Access Journals (Sweden)

    Jan Kazak

    2017-06-01

    Full Text Available It is obligatory for European Union member states to conduct the Strategic Environmental Assessment (SEA in order to implement the principles of environmental protection and development into the framework of strategic documents and development policies. As practice shows, SEAs are often performed in a descriptive, subjective manner which makes it difficult to perform a final evaluation of development variants. The use of environmental indicators which allow for the quantification of states, processes and phenomena may help make SEA more objective. The aim of this article is to attempt at implementing environmental indicators into the SEA procedure. A matrix of environmental indicators taking into account environmental quality indicators and anthropogenic pressure indicators has been formulated as part of the research. The ArcGIS software with the CommunityViz platform was used for the analyses. The proposed concept and established model for the evaluation of the environmental consequences of the planning document is a contribution to the debate on issues related to SEA methodology and the use of the GIS-based approach in SEA.

  16. EARTHQUAKE VULNERABILITY ASSESSMENT FOR HOSPITAL BUILDINGS USING A GIS-BASED GROUP MULTI CRITERIA DECISION MAKING APPROACH: A CASE STUDY OF TEHRAN, IRAN

    Directory of Open Access Journals (Sweden)

    M. R. Delavar

    2015-12-01

    Full Text Available Nowadays, urban areas are threatened by a number of natural hazards such as flood, landslide and earthquake. They can cause huge damages to buildings and human beings which necessitates disaster mitigation and preparation. One of the most important steps in disaster management is to understand all impacts and effects of disaster on urban facilities. Given that hospitals take care of vulnerable people reaction of hospital buildings against earthquake is vital. In this research, the vulnerability of hospital buildings against earthquake is analysed. The vulnerability of buildings is related to a number of criteria including age of building, number of floors, the quality of materials and intensity of the earthquake. Therefore, the problem of seismic vulnerability assessment is a multi-criteria assessment problem and multi criteria decision making methods can be used to address the problem. In this paper a group multi criteria decision making model is applied because using only one expert’s judgments can cause biased vulnerability maps. Sugeno integral which is able to take into account the interaction among criteria is employed to assess the vulnerability degree of buildings. Fuzzy capacities which are similar to layer weights in weighted linear averaging operator are calculated using particle swarm optimization. Then, calculated fuzzy capacities are included into the model to compute a vulnerability degree for each hospital.

  17. Design of a GIS-based rating protocol to assess the potential for landfill closure using dredge material in post Hurricane Sandy New Jersey.

    Science.gov (United States)

    Miskewitz, Robert J; Barone, Daniel; Guterl, Sar J; Uchrin, Christopher G

    2017-05-12

    New Jersey is rapidly running out of capacity for storage of dredged material. A potential solution to this lack of storage space is to remove and reuse the dredged material for some beneficial use. Results from a Rutgers University project performed for the New Jersey Department of Transportation, Office of Maritime Resources, designed to assess the potential for closure of New Jersey landfills using dredge material from existing Confined Disposal Facilities (CDFs) are presented and discussed. The project included an update of the existing NJDEP landfill database, the development of a rating system to identify landfills with the highest potential to utilize dredged material for their closure, and the identification and preliminary investigation of the top candidate landfills based on this rating system.

  18. Simulation of the spatial stresses due to territorial land development on Yellow River Delta Nature Reserve using a GIS-based assessment model.

    Science.gov (United States)

    Zhang, Baolei; Zhang, Qiaoyun; Feng, Qingyu; Cui, Bohao; Zhang, Shumin

    2017-07-01

    This study aimed at assessing the stresses from land development in or around Yellow River Delta Nature Reserve (YRDNR) and identifying the impacted areas. Major land development types (reservoirs, pond, aquafarm, salt pan, road, residential land, industry land, farming land, and fishing land) in or around the YRDNR from 1995 to 2014 were identified using spatial data sets derived from remote sensing imageries. The spatial stresses were simulated by considering disturbance due to land development activities and accessibility of disturbance using a geographic information system based model. The stresses were then used to identify the impacted area by land development (IALD). The results indicated that main increasing land development types in the study area from 1995 to 2014 were salt pan and construction land. The 98.2% of expanded land development area and 93.7% of increased pump number showed a good control of reserve function zone on land development spread. The spatial stress values and percentages of IALD increased from 1995 to 2014, and IALD percentage exceeded 50% for both parts of YRDNR in 2014. The results of this study also provided the information that detailed planning of the YRDNR (2014-2020) could decrease the spatial stress and IALD percentage of the whole YRDNR on the condition that the area of land development activities increased by 24.4 km 2 from 2014 to 2020. Effective measures should be taken to protect such areas from being further disturbed in order to achieve the goal of a more effective conservation of the YRDNR, and attention should be paid to the disordered land development activities in or around the natural reserves.

  19. GIS-based Stress Field Modeling of the North Arm of Sulawesi (NAoS) and its application in mineral prospectivity assessment

    Science.gov (United States)

    Albert, Gáspár; Szentpéteri, Krisztián

    2017-04-01

    Remotely sensed and digital map data are useful sources for regional structural analysis, including stress calculations. If the type of a given fault is determined and is considered as Andersonian, and rather juvenile instead of a reactivated one, the tectonic stress can be calculated for each of the fault segments (Albert et al. 2016). The North Arm of Sulawesi, a west-east-trending land strip of the irregular shaped Sulawesi Island, is actively deforming and the upper plate tectonic setting is quite complex in this region since it is situated above a triple junction of the Eurasian, Pacific and Australian plates. The stress currently acting in this region not only creates neotectonics but triggers subduction-related volcanism shifting from west to east on the peninsula. The volcanic centers - adjacent to transfer faults and the colliding plates at depth - appear to be the most productive areas for epithermal-porphyry mineralization systems of economic potential (Szentpéteri et al. 2015). In this work we demonstrate how the derived stress field model helps to understand the location and clustering of various mineralization types in the NAoS. We examine if this method is applicable for mineral prospectively assessments. References Albert, G., Barancsuk, Á., and Szentpéteri, K., 2016, Stress field modelling from digital geological map data: Geophysical Research Abstracts, v. 18, EGU2016-14565. Szentpéteri, K., Albert, G., and Ungvári, Z., Plate tectonic - and stress field - modeling of the North Arm of Sulawesi, Indonesia, to better understand distribution of mineral deposits styles., in Proceedings SEG 2015 I World Class Ore Deposits: Discovery to Recovery, Wrest Point Convention Centre, Hobart, Australia, September 27 - 30. 2015.

  20. Comparing GIS-based habitat models for applications in EIA and SEA

    International Nuclear Information System (INIS)

    Gontier, Mikael; Moertberg, Ulla; Balfors, Berit

    2010-01-01

    Land use changes, urbanisation and infrastructure developments in particular, cause fragmentation of natural habitats and threaten biodiversity. Tools and measures must be adapted to assess and remedy the potential effects on biodiversity caused by human activities and developments. Within physical planning, environmental impact assessment (EIA) and strategic environmental assessment (SEA) play important roles in the prediction and assessment of biodiversity-related impacts from planned developments. However, adapted prediction tools to forecast and quantify potential impacts on biodiversity components are lacking. This study tested and compared four different GIS-based habitat models and assessed their relevance for applications in environmental assessment. The models were implemented in the Stockholm region in central Sweden and applied to data on the crested tit (Parus cristatus), a sedentary bird species of coniferous forest. All four models performed well and allowed the distribution of suitable habitats for the crested tit in the Stockholm region to be predicted. The models were also used to predict and quantify habitat loss for two regional development scenarios. The study highlighted the importance of model selection in impact prediction. Criteria that are relevant for the choice of model for predicting impacts on biodiversity were identified and discussed. Finally, the importance of environmental assessment for the preservation of biodiversity within the general frame of biodiversity conservation is emphasised.

  1. Energy and environmental assessment

    DEFF Research Database (Denmark)

    Lund, Henrik; Sukkumnoed, Decharut

    2004-01-01

    The paper introduce and discuss strategic environmental assessment (SEA) and economic assessment for energy innovation and suggests approach to influence support for sustainable energy development in Thailand.......The paper introduce and discuss strategic environmental assessment (SEA) and economic assessment for energy innovation and suggests approach to influence support for sustainable energy development in Thailand....

  2. The use of GIS-based support of recreational trail planning by local governments

    DEFF Research Database (Denmark)

    Olafsson, Anton Stahl; Skov-Petersen, Hans

    2014-01-01

    In the last decade, multiple GIS-based planning support systems have been developed in order to improve the basis for spatial planning. Recent research has focused on problems regarding a lack of utilisation or barriers to the use of advanced GIS and GIS-based planning support systems in planning...... applications. This paper discusses these research findings in the context of outdoor recreational planning by local governments in Denmark. According to a national survey of municipal planners, GIS-based planning support is widely used in Denmark, but more GIS is needed and is being requested for local outdoor...... recreation planning. However, considerable differences exist between the ways municipalities assess their need for and use of GIS planning support. These differences are explored in more detail using a factor analysis of planning variables and uses of GIS. Three situations are described: 1) extensive network...

  3. Use of GIS-based Site-specific Nitrogen Management for Improving Energy Efficiency

    Science.gov (United States)

    To our knowledge, geographical information system (GIS)-based site-specific nitrogen management (SSNM) techniques have not been used to assess agricultural energy costs and efficiency. This chapter uses SSNM case studies for corn (Zea mays L.) grown in Missouri and cotton (Gossypium hirsutum L.) gro...

  4. Environmental Workplace Assessment.

    Science.gov (United States)

    Bernier, Jacques; And Others

    1994-01-01

    Describes environmental workplace assessments as tools in developing customized training, highlighting the group process and individual interview techniques. Suggests that, by assessing the cultural climate of an organization, education providers can gather essential baseline information on an organization and thereby provide a guide for further…

  5. Creating a GIS-Based Decision-Support System

    Science.gov (United States)

    Alvarado, Lori; Gates, Ann Q.; Gray, Bob; Reyes, Raul

    1998-01-01

    Tilting the Balance: Climate Variability and Water Resource Management in the Southwest, a regional conference hosted by the Pan American Center for Environmental Studies, will be held at The University of Texas at El Paso on March 2-4, 1998. The conference is supported through the US Global Change Research Program (USGCRP) established by the President in 1989, and codified by Congress in the Global Change Research Act of 1990. The NASA Mission to Planet Earth program is one of the workshops sponsors. The purpose of the regional workshops is to improve understanding of the consequences of global change. This workshop will be focused on issues along the border and the Rio Grande River and thus will bring together stakeholders from Mexico, California, Texas, New Mexico, Arizona and Colorado representing federal, state, and local governments; universities and laboratories; industry, agricultural and natural resource managers; and non-governmental organizations. This paper discusses the efforts of the NASA PACES center create a GIS-based decision-support system that can be used to facilitate discussion of the complex issues of resource management within the targeted international region.

  6. Power and environmental assessment

    DEFF Research Database (Denmark)

    Cashmore, Matthew Asa; Richardson, Tim

    2013-01-01

    The significance of politics and power dynamics has long been recognised in environmental assessment (EA) research, but there has not been sustained attention to power, either theoretically or empirically. The aim of this special issue is to encourage the EA community to engage more consistently...

  7. Strategic environmental assessment

    DEFF Research Database (Denmark)

    Kørnøv, Lone

    1997-01-01

    The integration of environmental considerations into strategic decision making is recognized as a key to achieving sustainability. In the European Union a draft directive on Strategic Environmental Assessment (SEA) is currently being reviewed by the member states. The nature of the proposed SEA...... directive is outlined, together with its relationship with the process of spatial planning and public participation in Denmark. This paper analyses the adoption of the proposed directive and discusses whether the SEA is an appropriate tool for opening and democratizing political structures. It concludes...

  8. Environmental risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    MacDonell, M.M.

    1997-10-01

    This paper presents a current overview of the basic elements of environmental risk assessment within the basic four-step process of hazard identification, exposure assessment, toxicity assessment, and risk characterization. These general steps have been applied to assess both human and ecological risks from environmental exposures. Approaches used to identify hazards and exposures are being refined, including the use of optimized field sampling and more representative, rather than conservative,upper-bound estimates. In addition, toxicity data are being reviewed more rigorously as US and European harmonization initiatives gain strength, and the classification of chemicals has become more qualitative to more flexibly accommodate new dose-response information as it is developed. Finally, more emphasis is being placed on noncancer end points, and human and ecological risks are being weighed against each other more explicitly at the risk characterization phase. Recent advances in risk-based decision making reflect the increased transparency of the overall process, with more explicit incorporation of multiple trade-offs. The end result is a more comprehensive life-cycle evaluation of the risks associated with environmental exposures at contaminated sites.

  9. Earthwatch— Global environmental assessment

    Science.gov (United States)

    Jensen, C. E.; Brown, D. W.

    1981-05-01

    Progress of the United Nations Environment Program, Earthwatch, since its inception in 1972 is critically reviewed. The conclusion is reached that, while UNEP has provided support for several important programs in cooperation with United Nations specialized agencies, the new global assessment perspective envisioned at the 1972 Stockholm Conference on the Human Environment has not evolved. A framework is proposed calling for threshold criteria, statements of current conditions, predictions of trends to be watched, and alerts to warn of approaching environmental threats. A network of world, regional, and national assessment centers is recommended based on existing centers-of-excellence.

  10. Environmental contaminants: assessment and control

    National Research Council Canada - National Science Library

    Vallero, Daniel A

    2004-01-01

    ... Understanding Policy by Understanding Science Connections and Interrelationships of Environmental Science Environmental Assessment and Intervention Engineering Technical Note: Cleaning up a Hazardous Waste Site Social Aspects of Environmental Science Introduction to Environmental Policy The National Environmental Policy Act Issues in Environmental Science: Co...

  11. An environmental assessment system for environmental technologies

    DEFF Research Database (Denmark)

    Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

    2014-01-01

    A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

  12. A GIS-Based Optimization Technique for Spatial Location of ...

    African Journals Online (AJOL)

    GIS)-based package; TransCAD v. 5.0 was used to determine the optimal locations of one to ten waste bins. This optimization technique requires less computational time and the output of ten computer runs showed that partial service coverage ...

  13. GIS-based bivariate statistical techniques for groundwater potential ...

    Indian Academy of Sciences (India)

    Groundwater potential analysis prepares better comprehension of hydrological settings of different regions. This study shows the potency of two GIS-based data driven bivariate techniques namely statistical index (SI) and Dempster–Shafer theory (DST) to analyze groundwater potential in Broujerd region of Iran.

  14. GIS-based Integration of Interdisciplinary Ecological Data to Detect ...

    African Journals Online (AJOL)

    GIS-based Integration of Interdisciplinary Ecological Data to Detect Land-cover Changes in Creek Mangroves at Gazi Bay, Kenya. ... Very low values of basal area (7.7 m2/ha and 4.9 m2/ha) and complexity indices (1.86 and 1.12) at Makongeni and Kinondo 1, respectively, reflected intense human pressure in these areas.

  15. GIS-based Geotechnical Microzonation Mapping using Analytic ...

    African Journals Online (AJOL)

    ... (GIS)-based geotechnical microzonation model/map using Analytic Hierarchy Process (AHP) for Shire-Endasilasie, a rapidly growing city in Tigray, northern Ethiopia. The influencing factors considered as inputs for the development of the model are (i) slope gradient, (ii) bed rock and soil type, (iii) swelling potential of soil ...

  16. GIS-Based bivariate statistical techniques for groundwater potential ...

    Indian Academy of Sciences (India)

    24

    driven and knowledge-driven models (Corsini ... addition, the usage application of GIS-based SI technique in groundwater potential mapping .... lithology of an given area and affect the drainage density and can be of great big value for to evaluate ...

  17. Environmental compliance assessment review

    International Nuclear Information System (INIS)

    Hilliday, G.H.

    1991-01-01

    During the period 1972-1991, The United States Congress passed stringent environmental statues which the Environment Protection Agency implemented via regulations. The statues and regulations contain severe civil and criminal penalties. Civil violations resulted in fines, typically payable by the company. The act of willfully and knowingly violating the permit conditions or regulations can result in criminal charges being imposed upon the responsible part, i.e., either the company or individual. Criminal charges can include fines, lawyer fees, court costs and incarceration. This paper describes steps necessary to form an effective Environmental Compliance Assessment Review [CAR] program, train field and engineering personnel and perform a CAR audit. Additionally, the paper discusses the findings of a number of Exploration and Production [E and P] field audits

  18. Environmental Impact Assessment: A Procedure.

    Science.gov (United States)

    Stover, Lloyd V.

    Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

  19. Landslides along Highways: GIS-based Inventory and Planning Issues

    Science.gov (United States)

    Jaeger, Ann-Kathrin; Klose, Martin; Damm, Bodo

    2015-04-01

    assess landslide impacts and the effectiveness of measures for their mitigation. The landslide inventory is part of an ongoing study concerned with the problems of damage financing at low-volume roads in mountain areas with shrinking populations and fiscal deficits. Using the example of the Harz Mountains, a key research question refers to a comparison of the costs necessary to spend for safe road operations with the benefits from providing traffic connections to landslide-prone rural communities. This study combines the damage and loss data stored in the inventory with different data sets on traffic density, local population, and road financing. The research results contribute to the development of planning strategies for cost-efficient maintenance of highway infrastructures exposed to landslide hazards. References Bhandary, N.P., Yatabe, R., Dahal, R.K., Hasegawa, S., Inagaki, H., 2013. Areal distribution of large-scale landslides along highway corridors in central Nepal. Georisk 7, 1-20. Hungr, O., Evans, S.G., Hazzard, J., 1999. Magnitude and frequency of rock falls and rockslides along the main transportation corridors of southwestern British Columbia. Canadian Geotechnical Journal 36, 224-238 Klose, M., Damm, B., Terhorst, B., 2014b. Landslide cost modeling for transportation infrastructures: a methodological approach. Landslides, DOI 10.1007/s10346-014-0481-1. Saha, A.K., Arora, M.K., Gupta, R.P., Virdi, M.L., Csaplovics, E., 2005. GIS-based route planning in landslide-prone areas. International Journal of Geographical Information Science 19, 1149-1175.

  20. Environmental assessment: Industry perspective

    International Nuclear Information System (INIS)

    Meadley, T.

    1994-01-01

    The Canadian mining industry supports the concept of environmental assessment, but the current process at the time of the conference had a number of problems that the industry felt should be addressed. The author makes the following suggestions: that the process for individual projects should be separated from policy issues; that panel members should be drawn from a full-time staff; that there should be better referral criteria to determine which projects require full scale assessment including public hearings; that either the government or project opponents should participate but not both; that the financial burden on proponents should be reduced; that funding of intervenors should be controlled; that there should be a definite time frame

  1. Strategic environmental assessment: Integrated environmental management

    CSIR Research Space (South Africa)

    Audouin, M

    2004-01-01

    Full Text Available is to provide general information on techniques, tools and processes for environmental assessment and management. The material in this document draws upon experience and knowledge from South African Overview of Integrated Environmental Management Screening..., social and economic considerations. Through the integration of environmental, social and economic objectives into the policy and planning process, SEA has the potential to assist in the implementation of the concept of sustainable development. SEA...

  2. Development of Web GIS-Based VFSMOD System with Three Modules for Effective Vegetative Filter Strip Design

    Directory of Open Access Journals (Sweden)

    Dong Soo Kong

    2013-08-01

    Full Text Available In recent years, Non-Point Source Pollution has been rising as a significant environmental issue. The sediment-laden water problem is causing serious impacts on river ecosystems not only in South Korea but also in most countries. The vegetative filter strip (VFS has been thought to be one of the most effective methods to reduce the transport of sediment to down-gradient area. However, the effective width of the VFS first needs to be determined before VFS installation in the field. To provide an easy-to-use interface with a scientific VFS modeling engine, the Web GIS-based VFSMOD system was developed in this study. The Web GIS-based VFSMOD uses the UH and VFSM executable programs from the VFSMOD-w model as core engines to simulate rainfall-runoff and sediment trapping. To provide soil information for a point of interest, the Google Map interface to the MapServer soil database system was developed using the Google Map API, Javascript, Perl/CGI, and Oracle DB programming. Three modules of the Web GIS-based VFSMOD system were developed for various VFS designs under single storm, multiple storm, and long-term period scenarios. These modules in the Web GIS-based VFSMOD system were applied to the study watershed in South Korea and these were proven as efficient tools for the VFS design for various purposes.

  3. Workshop on environmental assessment

    International Nuclear Information System (INIS)

    Watson, E.C.

    1982-07-01

    Objectives of the workshop were: to review and evaluate the state-of-the-art of environmental impact assessments as applied to the regulation of applications of nuclear energy and related ancillary systems; to identify areas where existing technology allows establishing acceptable methods or standard practices that will meet the requirements of the NRC regulations, standards and guides for both normal operations and off-standard conditions including accident considerations; to illuminate topics where existing models or analytical methods are deficient because of unverified assumptions, a paucity of empirical data, conflicting results reported in the literature or a need for observation of operation systems; to compile, analyze and synthesize a prioritized set of research needs to advance the state-of-the-art to the level which will meet all of the requirements of the Commission's regulations, standards and guides; and to develop bases for maintaining the core of regulatory guidance at the optimum level balancing technical capabilities with practical considerations of cost and value to the regulatory process. The discussion held in small group sessions on aquatic, atmospheric, and terrestrial pathways are presented. The following research needs were identified as common to all three groups: validation of models; characterization of source terms; development of screening techniques; basis for de minimis levels of contamination; and updating of objectives for environmental monitoring programs

  4. GIS based solid waste management information system for Nagpur, India.

    Science.gov (United States)

    Vijay, Ritesh; Jain, Preeti; Sharma, N; Bhattacharyya, J K; Vaidya, A N; Sohony, R A

    2013-01-01

    Solid waste management is one of the major problems of today's world and needs to be addressed by proper utilization of technologies and design of effective, flexible and structured information system. Therefore, the objective of this paper was to design and develop a GIS based solid waste management information system as a decision making and planning tool for regularities and municipal authorities. The system integrates geo-spatial features of the city and database of existing solid waste management. GIS based information system facilitates modules of visualization, query interface, statistical analysis, report generation and database modification. It also provides modules like solid waste estimation, collection, transportation and disposal details. The information system is user-friendly, standalone and platform independent.

  5. Gis-Based Multi-Criteria Decision Analysis for Forest Fire Risk Mapping

    Science.gov (United States)

    Akay, A. E.; Erdoğan, A.

    2017-11-01

    The forested areas along the coastal zone of the Mediterranean region in Turkey are classified as first-degree fire sensitive areas. Forest fires are major environmental disaster that affects the sustainability of forest ecosystems. Besides, forest fires result in important economic losses and even threaten human lives. Thus, it is critical to determine the forested areas with fire risks and thereby minimize the damages on forest resources by taking necessary precaution measures in these areas. The risk of forest fire can be assessed based on various factors such as forest vegetation structures (tree species, crown closure, tree stage), topographic features (slope and aspect), and climatic parameters (temperature, wind). In this study, GIS-based Multi-Criteria Decision Analysis (MCDA) method was used to generate forest fire risk map. The study was implemented in the forested areas within Yayla Forest Enterprise Chiefs at Dursunbey Forest Enterprise Directorate which is classified as first degree fire sensitive area. In the solution process, "extAhp 2.0" plug-in running Analytic Hierarchy Process (AHP) method in ArcGIS 10.4.1 was used to categorize study area under five fire risk classes: extreme risk, high risk, moderate risk, and low risk. The results indicated that 23.81 % of the area was of extreme risk, while 25.81 % was of high risk. The result indicated that the most effective criterion was tree species, followed by tree stages. The aspect had the least effective criterion on forest fire risk. It was revealed that GIS techniques integrated with MCDA methods are effective tools to quickly estimate forest fire risk at low cost. The integration of these factors into GIS can be very useful to determine forested areas with high fire risk and also to plan forestry management after fire.

  6. GIS-BASED MULTI-CRITERIA DECISION ANALYSIS FOR FOREST FIRE RISK MAPPING

    Directory of Open Access Journals (Sweden)

    A. E. Akay

    2017-11-01

    Full Text Available The forested areas along the coastal zone of the Mediterranean region in Turkey are classified as first-degree fire sensitive areas. Forest fires are major environmental disaster that affects the sustainability of forest ecosystems. Besides, forest fires result in important economic losses and even threaten human lives. Thus, it is critical to determine the forested areas with fire risks and thereby minimize the damages on forest resources by taking necessary precaution measures in these areas. The risk of forest fire can be assessed based on various factors such as forest vegetation structures (tree species, crown closure, tree stage, topographic features (slope and aspect, and climatic parameters (temperature, wind. In this study, GIS-based Multi-Criteria Decision Analysis (MCDA method was used to generate forest fire risk map. The study was implemented in the forested areas within Yayla Forest Enterprise Chiefs at Dursunbey Forest Enterprise Directorate which is classified as first degree fire sensitive area. In the solution process, "extAhp 2.0" plug-in running Analytic Hierarchy Process (AHP method in ArcGIS 10.4.1 was used to categorize study area under five fire risk classes: extreme risk, high risk, moderate risk, and low risk. The results indicated that 23.81 % of the area was of extreme risk, while 25.81 % was of high risk. The result indicated that the most effective criterion was tree species, followed by tree stages. The aspect had the least effective criterion on forest fire risk. It was revealed that GIS techniques integrated with MCDA methods are effective tools to quickly estimate forest fire risk at low cost. The integration of these factors into GIS can be very useful to determine forested areas with high fire risk and also to plan forestry management after fire.

  7. Development of a GIS-Based Decision Support System for Diagnosis of River System Health and Restoration

    Directory of Open Access Journals (Sweden)

    Jihong Xia

    2014-10-01

    Full Text Available The development of a decision support system (DSS to inform policy making has been progressing rapidly. This paper presents a generic framework and the development steps of a decision tool prototype of geographic information systems (GIS-based decision support system of river health diagnosis (RHD-DSS. This system integrates data, calculation models, and human knowledge of river health status assessment, causal factors diagnosis, and restoration decision making to assist decision makers during river restoration and management in Zhejiang Province, China. Our RHD-DSS is composed of four main elements: the graphical user interface (GUI, the database, the model base, and the knowledge base. It has five functional components: the input module, the database management, the diagnostic indicators management, the assessment and diagnosis, and the visual result module. The system design is illustrated with particular emphasis on the development of the database, model schemas, diagnosis and analytical processing techniques, and map management design. Finally, the application of the prototype RHD-DSS is presented and implemented for Xinjiangtang River of Haining County in Zhejiang Province, China. This case study is used to demonstrate the advantages gained by the application of this system. We conclude that there is great potential for using the RHD-DSS to systematically manage river basins in order to effectively mitigate environmental issues. The proposed approach will provide river managers and designers with improved insight into river degradation conditions, thereby strengthening the assessment process and the administration of human activities in river management.

  8. Prioritizing stream types according to their potential risk to receive crop plant material--A GIS-based procedure to assist in the risk assessment of genetically modified crops and systemic insecticide residues.

    Science.gov (United States)

    Bundschuh, Rebecca; Kuhn, Ulrike; Bundschuh, Mirco; Naegele, Caroline; Elsaesser, David; Schlechtriemen, Ulrich; Oehen, Bernadette; Hilbeck, Angelika; Otto, Mathias; Schulz, Ralf; Hofmann, Frieder

    2016-03-15

    Crop plant residues may enter aquatic ecosystems via wind deposition or surface runoff. In the case of genetically modified crops or crops treated with systemic pesticides, these materials may contain insecticidal Bt toxins or pesticides that potentially affect aquatic life. However, the particular exposure pattern of aquatic ecosystems (i.e., via plant material) is not properly reflected in current risk assessment schemes, which primarily focus on waterborne toxicity and not on plant material as the route of uptake. To assist in risk assessment, the present study proposes a prioritization procedure of stream types based on the freshwater network and crop-specific cultivation data using maize in Germany as a model system. To identify stream types with a high probability of receiving crop materials, we developed a formalized, criteria-based and thus transparent procedure that considers the exposure-related parameters, ecological status--an estimate of the diversity and potential vulnerability of local communities towards anthropogenic stress--and availability of uncontaminated reference sections. By applying the procedure to maize, ten stream types out of 38 are expected to be the most relevant if the ecological effects from plant-incorporated pesticides need to be evaluated. This information is an important first step to identifying habitats within these stream types with a high probability of receiving crop plant material at a more local scale, including accumulation areas. Moreover, the prioritization procedure developed in the present study may support the selection of aquatic species for ecotoxicological testing based on their probability of occurrence in stream types having a higher chance of exposure. Finally, this procedure can be adapted to any geographical region or crop of interest and is, therefore, a valuable tool for a site-specific risk assessment of crop plants carrying systemic pesticides or novel proteins, such as insecticidal Bt toxins, expressed

  9. GIS-based biomass resource utilization for rice straw cofiring in the Taiwanese power market

    International Nuclear Information System (INIS)

    Hu, Ming-Che; Huang, An-Lei; Wen, Tzai-Hung

    2013-01-01

    Rice straw, a rich agricultural byproduct in Taiwan, can be used as biomass feedstock for cofiring systems. In this study, we analyzed the penetration of rice straw cofiring systems in the Taiwanese power market. In the power generation system, rice straw is cofired with fossil fuel in existing electricity plants. The benefits of cofiring systems include increasing the use of renewable energy, decreasing the fuel cost, and lowering greenhouse gas emissions. We established a linear complementarity model to simulate the power market equilibrium with cofiring systems in Taiwan. GIS-based analysis was then used to analyze the geospatial relationships between paddy rice farms and power plants to assess potential biomass for straw-power generation. Additionally, a sensitivity analysis of the biomass feedstock supply system was conducted for various cofiring scenarios. The spatial maps and equilibrium results of rice straw cofiring in Taiwanese power market are presented in the paper. - Highlights: ► The penetration of straw cofiring systems in the power market is analyzed. ► GIS-based analysis assesses potential straw-power generation. ► The spatial maps and equilibrium results of rice straw cofiring are presented

  10. Environmental impact assessment screening tool

    International Nuclear Information System (INIS)

    1995-05-01

    An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

  11. GIS-based Valuation of Ecosystem Services in Mountain Regions: A Case Study of the Karlovo Municipality in Bulgaria

    OpenAIRE

    Koulov,Boian; Ivanova,Ekaterina; Borisova,Bilyana; Assenov,Assen; Ravnachka,Aleksandra

    2017-01-01

    This study aims to apply approaches, methods, and indicators from the conceptual framework of ecosystem services valuation to a real world, local level case study. It tests a GIS-based mapping and valuation of ecosystem services model in a typical mountain municipality in Bulgaria. Investigation results address opportunities, challenges and limitations in the practical application of the ecosystem services concept. They include an integrated assessment of the ecosystem services in a specific ...

  12. Environmental Impact Assessment in Antarctica

    NARCIS (Netherlands)

    Bastmeijer, C.J.; Roura, R.; Bastmeijer, K.; Koivurova, T.

    2008-01-01

    This publication focuses on the instrument of Environmental Impact Assessment (EIA) that has been developed within the Antarctic Treaty System (ATS) as one of the tools to promote environmental protection. The states involved in the ATS already recognized the importance of this instrument in 1975

  13. The study of metal contamination in urban soils of Hong Kong using a GIS-based approach

    International Nuclear Information System (INIS)

    Li Xiangdong; Lee Siulan; Wong Szechung; Shi Wenzhong; Thornton, Iain

    2004-01-01

    The study of regional variations and the anthropogenic contamination by metals of soils is very important for environmental planning and monitoring in urban areas. An extensive survey was conducted in the highly urbanized Kowloon area (46.9 km 2 ) of Hong Kong, using a systematic sampling strategy with a sampling density of 3-5 composite soil samples (0-15 cm) per km 2 . Geochemical maps of 'total' metals (Cd, Cr, Cu, Ni, Pb and Zn) from strong acid extraction in the surface soils were produced based on geographical information system (GIS) technology. A significant spatial relationship was found for Ni, Cu, Pb and Zn in the soils using a GIS-based analysis, suggesting that these metal contaminants in the soils of the Kowloon area had common sources. Several hot-spot areas of metal contamination were identified from the composite metal geochemical map, mainly in the old industrial and residential areas. A further GIS analysis revealed that road junctions, major roads and industrial buildings were possible sources of heavy metals in the urban soils. The Pb isotope composition of the contaminated soils showed clear anthropogenic origins. - GIS can be used to identify soil contamination hot-spot areas and to assess potential pollutant sources in an urban community

  14. GIS-based assessment of landslide susceptibility using certainty ...

    Indian Academy of Sciences (India)

    The main goal of this study is to produce landslide susceptibility maps for the Qianyang County of Baoji city, China, using both certainty factor (CF) and index of entropy (IOE) models. At first, a landslide inventory map was prepared using earlier reports and aerial photographs as well as by carrying out field surveys. A total of ...

  15. gis-based integrated groundwater potential assessment of osun ...

    African Journals Online (AJOL)

    USER

    Surrette et al., 2008;. Yeh et al.,2008). Consequently, groundwater is not uniformly distributed in terms of quantity and quality. Depending on the hydrogeological and climatic conditions, either the magnitude of natural groundwater resources or ...

  16. GIS-based poverty and population distribution analysis in China

    Science.gov (United States)

    Cui, Jing; Wang, Yingjie; Yan, Hong

    2009-07-01

    Geographically, poverty status is not only related with social-economic factors but also strongly affected by geographical environment. In the paper, GIS-based poverty and population distribution analysis method is introduced for revealing their regional differences. More than 100000 poor villages and 592 national key poor counties are chosen for the analysis. The results show that poverty distribution tends to concentrate in most of west China and mountainous rural areas of mid China. Furthermore, the fifth census data are overlaid to those poor areas in order to gain its internal diversity of social-economic characteristics. By overlaying poverty related social-economic parameters, such as sex ratio, illiteracy, education level, percentage of ethnic minorities, family composition, finding shows that poverty distribution is strongly correlated with high illiteracy rate, high percentage minorities, and larger family member.

  17. A GIS-based multicriteria evaluation for aiding risk management Pinus pinaster Ait. forests: a case study in Corsican Island, western Mediterranean Region.

    Science.gov (United States)

    Pasqualini, Vanina; Oberti, Pascal; Vigetta, Stéphanie; Riffard, Olivier; Panaïotis, Christophe; Cannac, Magali; Ferrat, Lila

    2011-07-01

    Forest management can benefit from decision support tools, including GIS-based multicriteria decision-aiding approach. In the Mediterranean region, Pinus pinaster forests play a very important role in biodiversity conservation and offer many socioeconomic benefits. However, the conservation of this species is affected by the increase in forest fires and the expansion of Matsucoccus feytaudi. This paper proposes a methodology based on commonly available data for assessing the values and risks of P. pinaster forests and to generating maps to aid in decisions pertaining to fire and phytosanitary risk management. The criteria for assessing the values (land cover type, legislative tools for biodiversity conservation, environmental tourist sites and access routes, and timber yield) and the risks (fire and phytosanitation) of P. pinaster forests were obtained directly or by considering specific indicators, and they were subsequently aggregated by means of GIS-based multicriteria analysis. This approach was tested on the island of Corsica (France), and maps to aid in decisions pertaining to fire risk and phytosanitary risk (M. feytaudi) were obtained for P. pinaster forest management. Study results are used by the technical offices of the local administration-Corsican Agricultural and Rural Development Agency (ODARC)-for planning the conservation of P. pinaster forests with regard to fire prevention and safety and phytosanitary risks. The decision maker took part in the evaluation criteria study (weight, normalization, and classification of the values). Most suitable locations are given to target the public intervention. The methodology presented in this paper could be applied to other species and in other Mediterranean regions.

  18. GIS based water quality indexing of Malad creek, Mumbai (India): an impact of sewage discharges.

    Science.gov (United States)

    Vijay, Ritesh; Bhattacharyya, Tapas; Joshi, Rucha R; Dhage, S S; Sohony, R A

    2011-04-01

    Malad creek is one of the most heavily polluted water bodies in Mumbai, India. Presently, creek receives wastewater and sewage from open drains and nallahs as well as partially treated wastewater from treatment facilities. The objective of the present study was to assess and classify the water quality zones spatially and temporally based on physico-chemical and bacteriological analysis. For this, GIS based methodology was integrated with water quality indexing, according to National Sanitation Foundation. Nine water quality parameters were considered to generate the indices that represent the overall status of creek water quality. Based on field observations and spatial distribution of water quality, various options were suggested for improvement in water quality of the creek.

  19. An uncertainty and sensitivity analysis approach for GIS-based multicriteria landslide susceptibility mapping.

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Blaschke, Thomas

    2014-03-04

    GIS-based multicriteria decision analysis (MCDA) methods are increasingly being used in landslide susceptibility mapping. However, the uncertainties that are associated with MCDA techniques may significantly impact the results. This may sometimes lead to inaccurate outcomes and undesirable consequences. This article introduces a new GIS-based MCDA approach. We illustrate the consequences of applying different MCDA methods within a decision-making process through uncertainty analysis. Three GIS-MCDA methods in conjunction with Monte Carlo simulation (MCS) and Dempster-Shafer theory are analyzed for landslide susceptibility mapping (LSM) in the Urmia lake basin in Iran, which is highly susceptible to landslide hazards. The methodology comprises three stages. First, the LSM criteria are ranked and a sensitivity analysis is implemented to simulate error propagation based on the MCS. The resulting weights are expressed through probability density functions. Accordingly, within the second stage, three MCDA methods, namely analytical hierarchy process (AHP), weighted linear combination (WLC) and ordered weighted average (OWA), are used to produce the landslide susceptibility maps. In the third stage, accuracy assessments are carried out and the uncertainties of the different results are measured. We compare the accuracies of the three MCDA methods based on (1) the Dempster-Shafer theory and (2) a validation of the results using an inventory of known landslides and their respective coverage based on object-based image analysis of IRS-ID satellite images. The results of this study reveal that through the integration of GIS and MCDA models, it is possible to identify strategies for choosing an appropriate method for LSM. Furthermore, our findings indicate that the integration of MCDA and MCS can significantly improve the accuracy of the results. In LSM, the AHP method performed best, while the OWA reveals better performance in the reliability assessment. The WLC operation

  20. Modern biogeochemistry environmental risk assessment

    CERN Document Server

    Bashkin, Vladimir N

    2006-01-01

    Most books deal mainly with various technical aspects of ERA description and calculationsAims at generalizing the modern ideas of both biogeochemical and environmental risk assessment during recent yearsAims at supplementing the existing books by providing a modern understanding of mechanisms that are responsible for the ecological risk for human beings and ecosystem

  1. ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

    African Journals Online (AJOL)

    Production activities in any industry may “harm the environment through their damaging effects on air, water, soil and biodiversity.”1. To protect the environment, it is imperative to conduct environmental impact assessment (“EIA”) of investment projects in order to identify their potential harms. Appropriate measures should be ...

  2. Gis-Based Surface Analysis of Archaeological Finds

    Science.gov (United States)

    Kovács, K.; Hanke, K.; Moser, M.

    2011-09-01

    The international research project HiMAT (History of Mining Activities in the Tyrol and adjacent areas) is dedicated to the study of mining history in the Eastern Alps by various scientific disciplines. The aim of this program is the analysis of the mining activities' impacts on environment and human societies. Unfortunately, there is only a limited number of specific regions (e.g. Mitterberg) to offer possibilities to investigate the former mining expansions. Within this multidisciplinary project, the archaeological sites and finds are analyzed by the Surveying and Geoinformation Unit at the University of Innsbruck. This paper shows data fusion of different surveying and post-processing methods to achieve a photo-realistic digital 3D model of one of these most important finds, the Bronze Age sluice box from the Mitterberg. The applied workflow consists of four steps: 1. Point cloud processing, 2. Meshing of the point clouds and editing of the models, 3. Image orientation, bundle and image adjustment, 4. Model texturing. In addition, a short range laser scanning survey was organized before the conservation process of this wooden find. More accurate research opportunities were offered after this detailed documentation of the sluice box, for example the reconstruction of the broken parts and the surface analysis of this archaeological object were implemented using these high-resolution datasets. In conclusion, various unperceived patterns of the wooden boards were visualized by the GIS-based tool marks investigation.

  3. GIS-BASED SURFACE ANALYSIS OF ARCHAEOLOGICAL FINDS

    Directory of Open Access Journals (Sweden)

    K. Kovács

    2012-09-01

    Full Text Available The international research project HiMAT (History of Mining Activities in the Tyrol and adjacent areas is dedicated to the study of mining history in the Eastern Alps by various scientific disciplines. The aim of this program is the analysis of the mining activities’ impacts on environment and human societies. Unfortunately, there is only a limited number of specific regions (e.g. Mitterberg to offer possibilities to investigate the former mining expansions. Within this multidisciplinary project, the archaeological sites and finds are analyzed by the Surveying and Geoinformation Unit at the University of Innsbruck. This paper shows data fusion of different surveying and post-processing methods to achieve a photo-realistic digital 3D model of one of these most important finds, the Bronze Age sluice box from the Mitterberg. The applied workflow consists of four steps: 1. Point cloud processing, 2. Meshing of the point clouds and editing of the models, 3. Image orientation, bundle and image adjustment, 4. Model texturing. In addition, a short range laser scanning survey was organized before the conservation process of this wooden find. More accurate research opportunities were offered after this detailed documentation of the sluice box, for example the reconstruction of the broken parts and the surface analysis of this archaeological object were implemented using these high-resolution datasets. In conclusion, various unperceived patterns of the wooden boards were visualized by the GIS-based tool marks investigation.

  4. Study on GIS-based sport-games information system

    Science.gov (United States)

    Peng, Hongzhi; Yang, Lingbin; Deng, Meirong; Han, Yongshun

    2008-10-01

    With the development of internet and such info-technologies as, Information Superhighway, Computer Technology, Remote Sensing(RS), Global Positioning System(GPS), Digital Communication and National Information Network(NIN),etc. Geographic Information System (GIS) becomes more and more popular in fields of science and industries. It is not only feasible but also necessary to apply GIS to large-scale sport games. This paper firstly discussed GIS technology and its application, then elaborated on the frame and content of Sport-Games Geography Information System(SG-GIS) with the function of gathering, storing, processing, sharing, exchanging and utilizing all kind of spatial-temporal information about sport games, and lastly designed and developed a public service GIS for the 6th Asian Winter Games in Changchun, China(CAWGIS). The application of CAWGIS showed that the established SG-GIS was feasible and GIS-based sport games information system was able to effectively process a large amount of sport-games information and provide the real-time sport games service for governors, athletes and the public.

  5. Strategic Environmental Assessment: Integrated environmental management

    CSIR Research Space (South Africa)

    Department of Environmental Affairs and Tourism, DEAT

    2004-01-01

    Full Text Available , or an integrative role, where the focus is on combining environmental, social and economic considerations. Through the integration of environmental, social and economic objectives into the policy and planning process, SEA has the potential to assist... and economic considerations (K?rn?v and Thissen, 2000). Through the integration of environmental, social and economic objectives into the policy and planning process, SEA has the potential to assist in the implementation of the concept of sustainable...

  6. Building better environmental risk assessments

    Directory of Open Access Journals (Sweden)

    Raymond eLayton

    2015-08-01

    Full Text Available Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERA for genetically modified (GM crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data, and adapting advances in risk analysis from other relevant disciplines.

  7. Federal environmental assessment panel process

    International Nuclear Information System (INIS)

    Edwards, R.A.; King, J.M.

    1996-01-01

    The Government of Canada inaugurated an environmental assessment process in 1973. Since that time, the Department of Natural Resources, or its predecessor, the Department of Energy Mines and Resources, and industrial clients of the Department, have been major participants in the process. In 1995, the authors interviewed representatives of a number of client industries and selected individuals, to ask their opinion of the public hearing part of the environmental assessment process, with the objective of identifying shortcomings and proposing improvements. Respondents criticized the hearings as costly, time-wasting, bureaucratic, and uncertain in cost, time, and outcome. A number of observations on noted areas of shortcoming are presented in this paper, with suggestions for improvement

  8. Programmatic Environmental Assessment for Standard Targetry Replacement

    National Research Council Canada - National Science Library

    2006-01-01

    This Programmatic Environmental Assessment (PEA) evaluates potential direct, indirect, and cumulative impacts of standard targetry replacement and alternatives on environmental and land use resources...

  9. Environmental Assessments and Stakeholder Involvement

    International Nuclear Information System (INIS)

    Wesolowski, Cassandra

    2006-01-01

    Directives and legislation on EIA and SEA need to provide more guidance on how and when public participation should be used. There are now several examples of how well public participation can be performed and the methods are becoming more proactive and innovative. By increasing the role of public participation within the Environmental Assessment process, plans, programmes and projects will become more publicly acceptable. There does need to be a balance as to where public participation is performed in the system, as too much can be a stress on resources and time, as well as producing ineffective results. Key stages such as scoping, preparing the environmental statement or report and decision-making need to be highlighted for the benefits public participation can have. The Aarhus Convention is certainly making a difference in the UK; however it is difficult to judge exactly how much difference yet. It was only fully implemented in the UK in 2005 although some Authorities were applying the three pillars prior to implementation. It is not clear how aware the general public are of the Convention and their rights. Empowering communities in the UK. will communities for decision-making in Environmental Assessments? Providing the public with resources to enable them to fully engage in the process will improve the participation and increase their confidence, but how will this increase their influence within the decision-making process? Ultimately, should the stakeholders and public just influence the incremental decisions made in Environmental Assessments or have more responsibility within the major decisions taken? It will be interesting to see how these issues are addressed over the coming years

  10. Bilastine: an environmental risk assessment.

    Science.gov (United States)

    Lucero, María Luisa; Peither, Armin; Ledo, Francisco

    2015-10-01

    Bilastine is a new oral selective, non-sedating histamine H1 antagonist for the symptomatic treatment of allergic rhinoconjunctivitis and urticaria. The European Medicines Agency requires an Environmental Risk Assessment (ERA) for all novel medicines for human use. To calculate the bilastine predicted environmental concentration in surface water (PECsw; phase I ERA), and to determine the effects of bilastine on aquatic systems (phase II [tier A]). Bilastine PECsw was calculated using the maximum daily dosage (20 mg), assuming that all administered bilastine was released into the aquatic environment. A persistence, bioaccumulation and toxicity assessment was conducted using the log Kow from the molecular structure. In phase II (tier A), a ready biodegradability test was performed, and bilastine's potential toxicity to various aquatic and sediment-dwelling micro-organisms was evaluated. Bilastine PECSW was calculated as 0.1 μg L(-1), and the compound was not readily biodegradable. Bilastine had no significant effects on Chironomus riparius midges, or on the respiration rate of activated sludge. For green algae, the bilastine no observed effect concentration (NOEC) was 22 mg L(-1); bilastine had no effect on zebra fish development, or on the reproduction rate of daphnids. Bilastine NOEC values against zebra fish, algae, daphnids, and aerobic organisms in activated sludge were at least 130 000-fold greater than the calculated PECSW value. No environmental concerns exist from bilastine use in patients with allergic rhinoconjunctivitis or urticaria.

  11. Environmental impact assessment Geopressure Subprogram

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-07-01

    This environmental impact assessment (EIA) addresses the expected programmatic activities of the Geopressure Subprogram of the Division of Geothermal Energy. The goal of the Geopressure Subprogram is to stimulate development of geopressured resources as an economic, reliable, operationally safe, and environmentally acceptable energy source. The subprogram includes activities in the areas of engineering research and development; resource exploration, assessment, and development; resource utilization including pilot and demonstration facilities; and environmental research and control technology development. It should be recognized that most of the subprogram activities extend over several years and are in their early stages of implementation at this time. The zones of potential geopressure development are in the region located along the Texas and Louisiana Gulf Coasts extending up to 200 miles (300 km) inland. Geopressured zones are sedimentary basins where water is trapped at high pressures within or below thick, nearly impermeable shale sequences. The confined water supports most or all of the weight of the overburden. This inhibits sediment compaction and causes formation pore pressure to exceed hydrostatic pressure. in sedimentary basins that are underlain by thin oceanic crust, upward thermal conduction from the mantle heats geopressured fluids and sediments to abnormally high temperatures, often in excess of 260 C (500 F).

  12. GIS Based Measurement and Regulatory Zoning of Urban Ecological Vulnerability

    Directory of Open Access Journals (Sweden)

    Xiaorui Zhang

    2015-07-01

    Full Text Available Urban ecological vulnerability is measured on the basis of ecological sensitivity and resilience based on the concept analysis of vulnerability. GIS-based multicriteria decision analysis (GIS-MCDA methods are used, supported by the spatial analysis tools of GIS, to define different levels of vulnerability for areas of the urban ecology. These areas are further classified into different types of regulatory zones. Taking the city of Hefei in China as the empirical research site, this study uses GIS-MCDA, including the index system, index weights and overlay rules, to measure the degree of its ecological vulnerability on the GIS platform. There are eight indices in the system. Raking and analytical hierarchy process (AHP methods are used to calculate index weights according to the characteristics of the index system. The integrated overlay rule, including selection of the maximum value, and weighted linear combination (WLC are applied as the overlay rules. In this way, five types of vulnerability areas have been classified as follows: very low vulnerability, low vulnerability, medium vulnerability, high vulnerability and very high vulnerability. They can be further grouped into three types of regulatory zone of ecological green line, ecological grey line and ecological red line. The study demonstrates that ecological green line areas are the largest (53.61% of the total study area and can be intensively developed; ecological grey line areas (19.59% of the total area can serve as the ecological buffer zone, and ecological red line areas (26.80% cannot be developed and must be protected. The results indicate that ecological green line areas may provide sufficient room for future urban development in Hefei city. Finally, the respective regulatory countermeasures are put forward. This research provides a scientific basis for decision-making around urban ecological protection, construction and sustainable development. It also provides theoretical method

  13. MULTICRITERIA APPROACH FOR ASSESSMENT OF ENVIRONMENTAL QUALITY

    OpenAIRE

    Boris Agarski; Igor Budak; Janko Hodolič; Đorđe Vukelić

    2010-01-01

    Environment is important and inevitable element that has direct impact on life quality. Furthermore, environmental protection represents prerequisite for healthy and sustainable way of life. Environmental quality can be represented through specific indicators that can be identified, measured, analyzed, and assessed with adequate methods for assessment of environmental quality. Problem of insight in total environmental quality, caused by different, mutually incomparable, indicators of environm...

  14. Live Fire Range Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    None

    1993-08-01

    The Central Training Academy (CTA) is a DOE Headquarters Organization located in Albuquerque, New Mexico, with the mission to effectively and efficiently educate and train personnel involved in the protection of vital national security interests of DOE. The CTA Live Fire Range (LFR), where most of the firearms and tactical training occurs, is a complex separate from the main campus. The purpose of the proposed action is to expand the LFR to allow more options of implementing required training. The Department of Energy has prepared this Environmental Assessment (EA) for the proposed construction and operation of an expanded Live Fire Range Facility at the Central Training Academy in Albuquerque, New Mexico. Based on the analysis in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an environmental impact statement is not required and DOE is issuing this Finding of No Significant Impact (FONSI).

  15. GIS-based multi-criteria site selection for zebra mussel cultivation: Addressing end-of-pipe remediation of a eutrophic coastal lagoon ecosystem.

    Science.gov (United States)

    Bagdanavičiūtė, Ingrida; Umgiesser, Georg; Vaičiūtė, Diana; Bresciani, Mariano; Kozlov, Igor; Zaiko, Anastasija

    2018-04-11

    Farming of shellfish and seaweeds is a tested tool for mitigating eutrophication consequences in coastal environments, however as many other marine economic activities it should be a subject of marine spatial planning for designating suitable sites. The present study proposes site selection framework for provisional zebra mussel farming in a eutrophic lagoon ecosystem, aimed primarily at remediation purposes. GIS-based multi-criteria approach was applied, combining data from empirical maps, numerical models and remote sensing to estimate suitability parameters. Site selection and prioritisation of suitable areas considered 15 environmental and socio-economic criteria, which contributed to 4 optimisation models (settlement, growth and survival of mussels, environmental and socio-economic) and 3 predefined scenarios representing provisional goals of mussel cultivation: spat production, biomass production and bioremediation. The relative importance of each criterion was assessed utilizing the Analytical Hierarchy Process. Site suitability index was calculated and the final result of the site selection analysis was summarized for 3 scenarios and overall suitability map. Four suitability classes (unsuitable, least, moderately and most suitable) were applied, and 3 most suitable zones for provisional zebra mussel cultivation with 12 candidate sites were selected accordingly. The integrated approach presented in this study can be adjusted for designating zebra mussel farming sites in other estuarine lagoon ecosystems, or cultivation of other mussel species for bioremediation purposes. The analytical framework and the workflow designed in this study are also adoptable for addressing other aquaculture-related spatial planning issues. Copyright © 2018 Elsevier B.V. All rights reserved.

  16. Development of a GIS-based, real-time Internet mapping tool for rabies surveillance

    Directory of Open Access Journals (Sweden)

    Manangan Jamie

    2006-11-01

    Full Text Available Abstract Background Oral rabies vaccination programs have been implemented to control the spread of wildlife rabies in the United States. However, current surveillance systems are inadequate for the efficient management and evaluation of these large scale vaccine baiting programs. With this in mind, a GIS-based rabies surveillance database and Internet mapping application was created. This surveillance system, RabID, provides a new resource for the rapid mapping and dissemination of data on animal rabies cases in relation to unaffected, enzootic, and baited areas where current interventions are underway. Results RabID is a centralized database for diagnostic and demographic information collected by local, state, and federal agencies involved in rabies surveillance. The geo-referenced database remits data to an Internet-accessible mapping application that displays rabies surveillance data in relation to environmental and geographic features. Conclusion RabID provides a pioneering example of the power of geographically based Internet-accessible, infectious disease surveillance. This surveillance system was developed from existing technology and is readily adaptable to other infectious diseases and may be particularly useful for zoonoses. The development and application of public health informatics technology may enhance the effectiveness of public health interventions and allow better evaluation of public health interventions.

  17. GIS-based method for wind farm location multi-criteria analysis

    Directory of Open Access Journals (Sweden)

    Michał Szurek

    2014-09-01

    Full Text Available The paper presents a GIS-based method for selecting an optimum location of wind farm on the case study of the Prusice commune in Lower Silesia (SW Poland. The adopted multi-criteria approach utilises the Analytic Hierarchy Process (AHP and Weighted Linear Combination (WLC methods to determine weights of sitting criteria (factors and constraints, and to develop a composite suitability map from single-factor maps representing these criteria. The adopted sitting criteria have been identified based on literature review, and include: technical, spatial, social and environmental aspects of wind farm development, and also address specific geographical constrains of this part of Poland. The most suitable and suitable areas have been presented on a wind farm suitability map for the commune. The area size of the largest suitable spots (14 varies from 10 to 64 ha. The proposed method and the results of this work can be used to support sustainable spatial policy and spatial development on all levels of public administration related to renewable resources use.

  18. GIS based generation of dynamic hydrological and land patch simulation models for rural watershed areas

    Directory of Open Access Journals (Sweden)

    M. Varga

    2016-03-01

    Full Text Available This paper introduces a GIS based methodology to generate dynamic process model for the simulation based analysis of a sensitive rural watershed. The Direct Computer Mapping (DCM based solution starts from GIS layers and, via the graph interpretation and graphical edition of the process network, the expert interface is able to integrate the field experts’ knowledge in the computer aided generation of the simulation model. The methodology was applied and tested for the Southern catchment basin of Lake Balaton, Hungary. In the simplified hydrological model the GIS description of nine watercourses, 121 water sections, 57 small lakes and 20 Lake Balaton compartments were mapped through the expert interface to the dynamic databases of the DCM model. The hydrological model involved precipitation, evaporation, transpiration, runoff, infiltration. The COoRdination of INformation on the Environment (CORINE land cover based simplified “land patch” model considered the effect of meteorological and hydrological scenarios on freshwater resources in the land patches, rivers and lakes. The first results show that the applied model generation methodology helps to build complex models, which, after validation can support the analysis of various land use, with the consideration of environmental aspects.

  19. Estimation of the porosity of wind breaks by using GIS-based ortho-image analysis

    Science.gov (United States)

    Mohammadian Behbahani, Ali; Hikel, Harald; Fister, Wolfgang; Heckrath, Goswin; Kuhn, Nikolaus J.

    2013-04-01

    The optimal design of windbreaks is very important to reduce wind erosion on farmlands and to combat soil degradation. Main parameters that must be considered when designing windbreaks are: height, width, orientation, porosity (density), distance between barrier rows, and length. There are two types of windbreaks, living (natural) and non-living (artificial). For tree shelterbelts (living windbreak) some of these parameters are related to inherent characteristics of the plants. For example, the height of a windbreak depends on the type of the plant, its growing conditions and the age of the plant. Porosity of windbreaks is considered to be one of the most important factors that controls wind erosion. It is expressed as the ratio between pore space and the space occupied by tree stems, branches, twigs and leaves. For the assessment of porosity it is necessary to convert the three-dimensional plant structure to a two-dimensional model of its shape or plant silhouette, because a direct measurement in the field is very inefficient, time consuming, and therefore impractical. To solve this issue, different approaches have been introduced to estimate the porosity of wind breaks, e.g. optical or aerodynamic porosity. In this study, the porosity of wind break networks was assessed for agricultural land in north Jutland, Denmark. The objective of this study was to develop a GIS-based Ortho-Image Analysis (OIA) method to estimate the porosity of windbreaks. The images of the windbreaks have three visible (RGB) bands and were taken in autumn 2012. The pixel size of 0.5 m is sufficient to visually distinguish the tree rows from their surrounding background. The identification of trees was done using grayscale images, where the dark trees strongly contrast to the bright sky in the background. The preliminary results indicate that the GIS based Ortho-Image analysis can be used as a quick, accurate, and reliable method to estimate the porosity of wind break networks. It can

  20. Environmental assessment in the uranium industry

    International Nuclear Information System (INIS)

    Frost, S.E.

    2002-01-01

    The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

  1. Environmental assessment in the uranium industry

    International Nuclear Information System (INIS)

    Frost, S.E.

    2000-01-01

    The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

  2. Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE`s Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES&H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report.

  3. Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

    International Nuclear Information System (INIS)

    1993-04-01

    This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE's Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES ampersand H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report

  4. GISELA - GIS-based evaluation of land use and agriculture market analysis under global warming

    Energy Technology Data Exchange (ETDEWEB)

    Mori, Shunsuke [Department of Industrial Administration, Faculty of Science and Technology, Tokyo University of Science, Yamasaki 2641, Noda, Chiba 278-8510 (Japan); Kato, Masahiro [Accenture Co., 1-11-44 Akasaka Minato-ku, Tokyo 107-8672 (Japan); Ido, Takahumi [Mizuho Information and Research Institute, Kandanishikicho 2-3, Chiyoda-ku, Tokyo 101-8443 (Japan)

    2010-01-15

    One of the important future issues is how agriculture production can meet the future demand increase due to the population and the income growth. Global warming would give both positive and negative impacts on them. Agriculture is often expected to supply biofuels to meet the growing transportation energy demand and the warming control policy. GISELA - GIS-based evaluation for land use and agriculture production model - is developed to evaluate the current and the potential cropland for rice, wheat, maize and soy-beans production under climate changes. We also assess the food and the feed demand based on the historical regional statistics for world into 18 regions. Finally, we assess the future food market integrating the above supply and demand conditions developing a dynamic optimization model, GISELA. Current GISELA findings are as follows: (1) potential cropland in south America will be extensively cultivated, (2) market price of wheat and soy will gradually go up while that of maize is almost stable in medium yield case, and (3) in the low-yield case, all crop prices hike rapidly in the mid of this century. (author)

  5. Environmental assessment and social justice

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, B.M.; Sorensen, J.H. [Oak Ridge National Lab., TN (United States); Hardee, H. [Tennessee Univ., Knoxville, TN (United States)

    1995-03-01

    The purpose of this document is to describe an approach to assessing environmental justice issues at the start of proposed project. It is a structural approach to screening using readily available census data and commercial products that emphasizes the ability to replicate results and provide systematic data that can be used to identify spatial inequities. While our discussion of the methodology addresses only public health and safety issues related to certain minority and cohort sub-groups, systematic use of methodology could provide a valuable screening tool for identifying impacts particular to low-income groups. While the assumptions can be questioned as to applicability, they are based both on theory and practical knowledge.

  6. Aquifer characterization through an integrated GIS-based tool

    Science.gov (United States)

    Criollo, Rotman; Velasco, Violeta; Vázquez-Suñé, Enric; Serrano-Juan, Alejandro; Alcaraz, Mar; García-Gil, Alejandro

    2016-04-01

    Hydraulic parameters of the subsurface (transmissivity, hydraulic conductivity, storativity and specific storage) are important to achieve hydrogeological studies such as environmental impact assessments, water resources evaluations or groundwater contamination remediation, among others. There are several methods to determine aquifer parameters but pumping test is the most commonly used method to obtain them and generally leads to reliable hydraulic parameters. These parameters and other hydraulic data available for integration into the hydrogeological studies (which currently are supported by groundwater numerical models) usually has a very diverse origin and format and, therefore, a chance of bias in the interpretations. Consequently, it becomes necessary to have effective instruments that facilitate the pre-process, the visualization, the analysis and the validation (e.g. graphical analysis techniques) of this great amount of data. To achieve this in a clear and understandable manner, the GIS environment is a useful instrument. We developed a software to analyze pumping tests in a GIS platform environment to support the hydraulic parameterization of groundwater flow and transport models. This novel platform provides a package of tools for collecting, managing, analyzing, processing and interpreting data derived from pumping tests in a GIS environment. Additionally, within the GIS platform, it is possible to process the hydraulic parameters obtained from the pumping test and to create spatial distribution maps, perform geostatistical analysis and export the information to an external software platform. These tools have been applied in the metropolitan area of Barcelona (Spain) to tests out and improve their usefulness in hydrogeological analysis.

  7. MULTICRITERIA APPROACH FOR ASSESSMENT OF ENVIRONMENTAL QUALITY

    Directory of Open Access Journals (Sweden)

    Boris Agarski

    2010-06-01

    Full Text Available Environment is important and inevitable element that has direct impact on life quality. Furthermore, environmental protection represents prerequisite for healthy and sustainable way of life. Environmental quality can be represented through specific indicators that can be identified, measured, analyzed, and assessed with adequate methods for assessment of environmental quality. Problem of insight in total environmental quality, caused by different, mutually incomparable, indicators of environmental load and difficult expression of overall environment quality, can be solved with multicriterial assessment. This paper presents appliance of multicriterial methods for analysis of indicators that represent environmental quality for several sites.

  8. Upper Bound Radiation Dose Assessment for Military Personnel at McMurdo Station, Antarctica, between 1962 and 1979 (2REV)

    Science.gov (United States)

    2017-09-30

    Institute of Occupational Safety and Health (NIOSH) Dose Reconstruction Program uses the Integrated Modules for Bioassay Analysis (IMBA) software ...McMurdo Station, Antarctica. Division of Radiological Health, U.S. Public Health Service, U.S Department of Health, Education , and Welfare, Washington...His work included, among others, hydrological and environmental modeling, GIS -based water security threat assessment, and evaluation of environmental

  9. Environmental assessment of the alkanolamines.

    Science.gov (United States)

    Davis, J W; Carpenter, C L

    1997-01-01

    This review provides a summary of current information available on the environmental fate and aquatic toxicology of the alkanolamines. Because these materials are widely used, there is a need to understand their fate and effects in the environment. This assessment was confined to information regarding selected physical properties of the alkanolamines as well as their potential for degradation in the atmosphere, soil, surface water, and groundwater. In addition, their relevant aquatic toxicological information and bioconcentration potential were evaluated. In general, the alkanolamines have high water solubilities and low to moderate vapor pressures. Some are solids whereas others are liquids at room temperature. Aqueous solutions of the alkanolamines are basic, with the pKas decreasing with increased alkyl substitution. Predictions of the environmental distribution of these compounds, based on a unit world model of Mackay and Paterson, suggested that alkanolamines would partition primarily into the aqueous compartment at equilibrium, with the remainder distributed to the atmosphere. Only a very small fraction of these materials is expected to sorb to soil or sediments. However, adsorption mechanisms other than partitioning into the soil organic layer were not considered in this model. Since polar compounds may sorb to soil by alternate mechanisms, this model may underestimate the true adsorption potential and subsequent environmental distribution of the alkanolamines. Future work with these compounds should focus on other types of adsorption mechanisms that could impact the environmental distribution of the alkanolamines. Although only small amount of the alkanolamines are expected to partition to the atmosphere, they are expected to be removed by reactions with photochemically generated hydroxyl radicals. They may also be removed from the atmosphere by precipitation, due to their high water solubility. Because of the relatively low levels expected to be present in

  10. 16 CFR 260.8 - Environmental assessment.

    Science.gov (United States)

    2010-01-01

    ....8 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE USE OF ENVIRONMENTAL MARKETING CLAIMS § 260.8 Environmental assessment. (a) National Environmental Policy... and analysis to determine whether issuing the Guides for the Use of Environmental Marketing Claims...

  11. 49 CFR 262.15 - Environmental assessment.

    Science.gov (United States)

    2010-10-01

    ... FRA to approve a project for physical construction. FRA's “Procedures for Considering Environmental... reviews (including environmental assessments and categorical excisions, but not environmental impact statements since there are restrictions on what types of entities can manage an environmental impact...

  12. 23 CFR 771.119 - Environmental assessments.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Environmental assessments. 771.119 Section 771.119 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.119 Environmental assessments. (a) An EA shall be prepared by...

  13. Environmental assessment of lightweight electric vehicles

    CERN Document Server

    Egede, Patricia

    2017-01-01

    This monograph adresses the challenge of the environmental assessment of leightweight electric vehicles. It poses the question whether the use of lightweight materials in electric vehicles can reduce the vehicles’ environmental impact and compares the environmental performance of a lightweight electric vehicle (LEV) to other types of vehicles. The topical approach focuses on methods from life cycle assessment (LCA), and the book concludes with a comprehensive concept on the environmental assessment of LEVs. The target audience primarily comprises LCA practitioners from research institutes and industry, but it may also be beneficial for graduate students specializing in the field of environmental assessment.

  14. GIS-based modelling of odour emitted from the waste processing plant: case study

    Directory of Open Access Journals (Sweden)

    Sόwka Izabela

    2017-01-01

    Full Text Available The emission of odours into the atmospheric air from the municipal economy and industrial plants, especially in urbanized areas, causes a serious problem, which the mankind has been struggling with for years. The excessive exposure of people to odours may result in many negative health effects, including, for example, headaches and vomiting. There are many different methods that are used in order to evaluate the odour nuisance. The results obtained through those methods can then be used to carry out a visualization and an analysis of a distribution of the odour concentrations in a given area by using the GIS (Geographic Information System. By their application to the spatial analysis of the impact of odours, we can enable the assessment of the magnitude and likelihood of the occurrence of odour nuisance. Modelling using GIS tools and spatial interpolation like IDW method and kriging can provide an alternative to the standard modelling tools, which generally use the emission values from sources that are identified as major emitters of odours. The work presents the result, based on the odour measurements data from waste processing plant, of the attempt to connect two different tools – the reference model OPERAT FB and GIS-based dispersion modelling performed using IDW method and ordinary kriging to analyse their behaviour in terms of limited observation values.

  15. SEPAL – a simple GIS-based tool to estimate sediment pathways in lowland catchments

    Directory of Open Access Journals (Sweden)

    N. Fohrer

    2009-08-01

    Full Text Available Even though soil loss in the lowlands imposes not as much a restriction on land use and agricultural productivity as in erosion affected mountainous areas, the input of fine sediment into the rivers and streams is a concern due to water quality issues and substrate siltation. Drains, river banks and agricultural fields are the three main sources of fine sediment in lowland regions. For a successful implementation of measures to decrease sediment input a well-founded knowledge of the individual entry pathways is essential. To assess the importance of possible entry pathways, a GIS based methodology (SEPAL has been established combining the ABAG, a river bank erosion formula and a regression approach to include the contributions of drains. SEPAL has been applied on a study catchment in Northern Germany. The results show that 15% of the sediment input into the river comes from agricultural drains, 71% from river banks and 14% from adjacent fields. A comparison of the results with field-mapping and -sampling shows that the approach is plausible. The calculated total annual sediment input is 616 t yr−1, while the measured suspended sediment load is 636 t yr−1. It can be concluded that the methodology is suitable for estimating sediment entry pathways and annual sediment loads in lowland catchments as a base for modelling projects and further investigations. However, further work is necessary for gaining sound knowledge about uncertainties and especially about the processes forcing sediment input from drains.

  16. Fuzzy Shannon Entropy: A Hybrid GIS-Based Landslide Susceptibility Mapping Method

    Directory of Open Access Journals (Sweden)

    Majid Shadman Roodposhti

    2016-09-01

    Full Text Available Assessing Landslide Susceptibility Mapping (LSM contributes to reducing the risk of living with landslides. Handling the vagueness associated with LSM is a challenging task. Here we show the application of hybrid GIS-based LSM. The hybrid approach embraces fuzzy membership functions (FMFs in combination with Shannon entropy, a well-known information theory-based method. Nine landslide-related criteria, along with an inventory of landslides containing 108 recent and historic landslide points, are used to prepare a susceptibility map. A random split into training (≈70% and testing (≈30% samples are used for training and validation of the LSM model. The study area—Izeh—is located in the Khuzestan province of Iran, a highly susceptible landslide zone. The performance of the hybrid method is evaluated using receiver operating characteristics (ROC curves in combination with area under the curve (AUC. The performance of the proposed hybrid method with AUC of 0.934 is superior to multi-criteria evaluation approaches using a subjective scheme in this research in comparison with a previous study using the same dataset through extended fuzzy multi-criteria evaluation with AUC value of 0.894, and was built on the basis of decision makers’ evaluation in the same study area.

  17. Environmental assessment of phosphogypsum stacks

    International Nuclear Information System (INIS)

    Odat, M.; Al-Attar, L.; Raja, G.; Abdul Ghany, B.

    2008-03-01

    Phosphogypsum is one of the most important by-products of phosphate fertilizer industry. It is kept in large stacks to the west of Homs city. Storing Phosphogypsum as open stacks exposed to various environmental effects, wind and rain, may cause pollution of the surrounding ecosystem (soil, plant, water and air). This study was carried out in order to assess the environmental impact of Phosphogypsum stacks on the surrounding ecosystem. The obtained results show that Phosphogypsum stacks did not increase the concentration of radionuclides, i.e. Radon-222 and Radium-226, the external exposed dose of gamma rays, as well as the concentration of heavy metals in the components of the ecosystem, soil, plant, water and air, as their concentrations did not exceed the permissible limits. However, the concentration of fluorine in the upper layer of soil, located to the east of the Phosphogypsum stacks, increased sufficiently, especially in the dry period of the year. Also, the concentration of fluoride in plants growing up near-by the Phosphogypsum stacks was too high, exceeded the permissible levels. This was reflected in poising plants and animals, feeding on the plants. Consequently, increasing the concentration of fluoride in soil and plants is the main impact of Phosphogypsum stacks on the surrounding ecosystem. Minimising this effect could be achieved by establishing a 50 meter wide protection zone surrounding the Phosphogypsum stacks, which has to be planted with non palatable trees, such as pine and cypress, forming wind barriers. Increasing the concentrations of heavy metals and fluoride in infiltrated water around the stacks was high; hence cautions must be taken to prevent its usage in any application or disposal in adjacent rivers and leaks.(author)

  18. Environmental policy, assessment and communication

    Energy Technology Data Exchange (ETDEWEB)

    Canter, D.; Krampen, M.; Stea, D.

    1988-01-01

    This second volume in the Gower ethnoscapes Series explores the realm of environmental policy and presents analysis of three major public policy issues: growing public concern over environmental factors; growing awareness of the relationship between environment, crime and adolescent development; and increased environmental awareness in relation to population growth and housing needs (especially housing for the elderly and mass housing for third world nations).

  19. Applying geographic information systems to support strategic environmental assessment: Opportunities and limitations in the context of Irish land-use plans

    International Nuclear Information System (INIS)

    Gonzalez, Ainhoa; Gilmer, Alan; Foley, Ronan; Sweeney, John; Fry, John

    2011-01-01

    The strengthening of spatial database infrastructures, further promoted by the INSPIRE Directive adopted in 2007, has led to an increased use of spatial data in planning and decision-making. Given that land-use plans are intrinsically spatial, such evidence and approaches can significantly benefit plan-making. A spatial framework could especially support the specific Strategic Environmental Assessment (SEA) aspects of the plan-making process. Spatial tools such as Geographic Information Systems (GIS) are particularly well-placed to support the environmental integration sought in SEA by providing evidence through the spatial assessment of multiple environmental datasets. Moreover, GIS bring the opportunity to augment conventional assessment techniques (e.g. matrix-based assessments) by acting as visual mediators of spatial knowledge and by providing an effective tool for the spatial and temporal analysis of environmental impacts. This paper presents a GIS-based approach to SEA (GISEA), and analyses the above premise by evaluating the barriers, limitations, opportunities and benefits of its implementation. The GISEA approach has been applied to seven development plans of differing scales in the Republic of Ireland. The results of the case studies revealed that current issues in SEA (e.g. restricted time-frames and institutional arrangements) condition the implementation of a GIS-based approach. Moreover, GIS expertise, data accessibility and quality remain limiting factors to an effective GIS application in SEA. However, the results also confirmed that GIS have the potential to increase the objectivity and accuracy of the assessment, enhance both the understanding of environmental and planning considerations and the delivery of information, and, therefore, help to improve the effectiveness of SEA practice.

  20. Public participation in Malawi's environmental impact assessment ...

    African Journals Online (AJOL)

    Since the adoption of the Environmental Management Act of 1996, Malawi has been using environmental impact assessment (EIA) as a tool for predicting and assessing the impact of development projects on the environment. This study assessed the extent of public participation in Malawi's EIA process. Desktop study of ...

  1. Is Environmental Impact Assessment fulfilling its potential?

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    2014-01-01

    fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed...

  2. Campgrounds Suitability Evaluation Using GIS-based Multiple Criteria Decision Analysis: A Case Study of Kuerdening, China

    Science.gov (United States)

    Cuirong, Wang; Zhaoping, Yang; Huaxian, Liu; Fang, Han; Wenjin, Xia

    2016-04-01

    The main objective of this study was to evaluate the suitability and select the most appropriate areas for building campgrounds in Kuerdening, China. To achieve this aim, AHP and GIS-based weighted overlay methods were adopted. AHP was used to determine the weights of the indexes, and ArcGIS 10 was used to calculate and map the campground suitability. In pursuit of minimum environmental effects and sustainable development, this paper identifies four factors to evaluate the suitability of areas for building campgrounds: natural environment condition, landscape condition, safety condition and infrastructure condition. The final outcome of this studywas the suitability map for building campgrounds. This research not only provides a theoretical guide for the construction of campgrounds in this area but also provides a scientific and efficientworkflow to evaluate the appropriateness of other areas. The result is reasonable and operable for camping facilities development and also useful for managers and planners working in local governments as well as investors.

  3. Environmental Assessment -- Hydrothermal Geothermal Subprogram

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-06-01

    This environmental impact assessment addresses the design, construction, and operation of an electric generating plant (3 to 4 MWe) and research station (Hawaii Geothermal Research Station (HGRS)) in the Puna district on the Island of Hawaii. The facility will include control and support buildings, parking lots, cooling towers, settling and seepage ponds, the generating plant, and a visitors center. Research activities at the facility will evaluate the ability of a successfully flow-tested well (42-day flow test) to provide steam for power generation over an extended period of time (two years). In future expansion, research activities may include direct heat applications such as aquaculture and the effects of geothermal fluids on various plant components and specially designed equipment on test modules. Construction-related impacts would be relatively minor. Construction of the facility will require the distance of about 1.7 ha (4.1 acres). No further disturbance is anticipated, unless it becomes necessary to replace the seepage pond with an injection well, because the production well is in service and adjacent roads and transmission lines are adequate. Disruption of competing land uses will be minimal, and loss of wildlife habitat will be acceptable. Noise should not significantly affect wildlife and local residents; the most noise activities (well drilling and flow testing) have been completed. Water use during construction will not be large, and impacts on competing uses are unlikely. Socio-economic impacts will be small because the project will not employ a large number of local residents and few construction workers will need to find local housing.

  4. GIS based ArcPRZM-3 model for bentazon leaching towards groundwater.

    Science.gov (United States)

    Akbar, Tahir Ali; Lin, Henry

    2010-01-01

    Groundwater contamination due to pesticide applications on agricultural lands is of great environmental concern. The mathematical models help to understand the mechanism of pesticide leaching in soils towards groundwater. We developed a user-friendly model called ArcPRZM-3 by integrating widely used Pesticide Root Zone Model version 3 (PRZM-3) using Visual Basic and Geographic Information System (GIS) based Avenue programming. ArcPRZM-3 could be used to simulate pesticide leaching towards groundwater with user-friendly input interfaces coupled with databases of crops, soils and pesticides. The outputs from ArcPRZM-3 could be visualized in user-friendly formats of tables, charts and maps. In this study we evaluated ArcPRZM-3 model by simulating bentazon leaching in soil towards groundwater. ArcPRZM-3 was applied to 37 sites in Woodruff County, Arkansas, USA to observe the daily average dissolved bentazon concentration for soybean, sorghum and rice at a depth of 1.8 m for a period of two years. Nineteen ranks of bentazon leaching potential were obtained using ArcPRZM-3 for all sites having different soil and crop combinations. ArcPRZM-3 simulation results for bentazon were compatible with the field monitored data in term of relative ranking and trend, although some uncertainties exist. This study indicated that macropore flow mechanism would be important in analyzing the effect of irrigation on groundwater contamination due to pesticides. Overall, ArcPRZM-3 could be used to simulate pesticide leaching towards groundwater more efficiently and effectively as compared to PRZM-3.

  5. GIS-based Integration of Interdisciplinary Ecological Data to Detect ...

    African Journals Online (AJOL)

    Key words: mangrove, satellite imagery, environment, aerial photography, GIS, Kenya Historic environmental, faunal, floral and socioeconomic data of Gazi Bay in coastal Kenya were collated and integrated into a GIS environment and data of impacts due to various factors were then related to remotely sensed data.

  6. 10 CFR 51.30 - Environmental assessment.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Environmental assessment. 51.30 Section 51.30 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations Implementing Section 102(2...

  7. Quality Assessment on Environmental Conservation Interventions in ...

    African Journals Online (AJOL)

    need for immediate attention. Development in those selected councils involves environmental use which should not ignore the question of environmental conservation interventions. The main objective this study was to assess the environmental interventions by local government authorities on quality of environment ...

  8. A GIS-based approach to prevent contamination of groundwater at regional scale

    Science.gov (United States)

    Balderacchi, M.; Vischetti, C.; di Guardo, A.; Trevisan, M.

    2009-04-01

    Sustainable development is a fundamental objective of the European Union. Since 1991, the use of numerical models has been used to assess the environmental fate of pesticides (directive 91/414 EC). Since then, new approaches to assess pesticide contamination have been developed. This is an ongoing process, with approaches getting increasingly close to reality. Actually, there is a new challenge to integrate the most advanced and cost-effective monitoring strategies with simulation models so that reliable indicators of unsaturated flow and transport can be suitably mapped and coupled with other indicators related to productivity and sustainability. The most relevant role of GIS in the analysis of pesticide fate in soil is its application to process together input data and the results of distribution model based simulations of pesticide transport. FitoMarche is a GIS-based software tool that estimates pesticide movement in the unsaturated zone using MACRO 5 and it is able to simulate complex and real crop rotations at the regional scale. Crop rotation involves the sequential production of different plant species on the same land, every crop is characterized by different agricultural practices that involve the use of different pesticides at different doses. FitoMarche extracts MACRO input data from a series of geographic data sets (shapefiles) and an internal database, writes input files for MACRO, executes the simulation and extracts solute and water fluxes from MACRO output files. The study has been performed in the Marche region, located in central Italy along the Adriatic coast. Soil, climate, land use shapefiles were provided from public authorities, crop rotation schemes were estimated from ISTAT (the national statistics institute) 5th agricultural census database using a municipality detail and agricultural practices following the local customs. Two herbicides have been tested: "A" is employed on maize crop, and "B" on maize, sunflower and sugarbeet. In the

  9. Ecological risk assessment as a framework for environmental impact assessments

    CSIR Research Space (South Africa)

    Claassen, Marius

    1999-01-01

    Full Text Available Environmental impact assessments in South Africa are usually conducted according to the integrated environmental management (IEM) procedure. The preliminary investigation reported here, indicated that most of the ecological requirements specified...

  10. A GIS-BASED MODAL MODEL OF AUTOMOBILE EXHAUST EMISSIONS

    Science.gov (United States)

    The report presents progress toward the development of a computer tool called MEASURE, the Mobile Emission Assessment System for Urban and Regional Evaluation. The tool works toward a goal of providing researchers and planners with a way to assess new mobile emission mitigation s...

  11. Environmental impact assessment of fish farm hatcheries ...

    African Journals Online (AJOL)

    Environmental impact assessments were taken to determine the causes of environmental threats to farm lands and the environment in the selected areas. Of significance of impact assessment were activities like air, traffic, noise, had insignificant impact (p > 0.05), while water pollution, insecurity as a result of land exposure ...

  12. Environmental impact assessment in the Nordic Countries

    International Nuclear Information System (INIS)

    Broden, K.; Palsson, S.E.; Poroddsson, P.

    2000-12-01

    A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

  13. GIS-based accident location and analysis system (GIS-ALAS) : project report : phase I

    Science.gov (United States)

    1998-04-06

    This report summarizes progress made in Phase I of the geographic information system (GIS) based Accident Location and Analysis System (GIS-ALAS). The GIS-ALAS project builds on PC-ALAS, a locationally-referenced highway crash database query system d...

  14. The Delaware Geography-Health Initiative: Lessons Learned in Designing a GIS-Based Curriculum

    Science.gov (United States)

    Rees, Peter W.; Silberman, Jordan A.

    2010-01-01

    The Delaware Geography-Health Initiative is a Web- and GIS-based set of lesson units for teaching geographic concepts and research methods within the context of the state's high school geography standards. Each unit follows a research-based, inquiry-centered model addressing questions of health because of Delaware's high incidence of cancer,…

  15. GIS-based NEXRAD Stage III precipitation database: automated approaches for data processing and visualization

    Science.gov (United States)

    Xie, Hongjie; Zhou, Xiaobing; Vivoni, Enrique R.; Hendrickx, Jan M. H.; Small, Eric E.

    2005-02-01

    This study develops a geographical information system (GIS) approach for automated processing of the Next Generation Weather Radar (NEXRAD) Stage III precipitation data. The automated processing system, implemented by using commercial GIS and a number of Perl scripts and C/C++ programs, allows for rapid data display, requires less storage capacity, and provides the analytical and data visualization tools inherent in GIS as compared to traditional methods. In this paper, we illustrate the development of automatic techniques to preprocess raw NEXRAD Stage III data, transform the data to a GIS format, select regions of interest, and retrieve statistical rainfall analysis over user-defined spatial and temporal scales. Computational expense is reduced significantly using the GIS-based automated techniques. For example, 1-year Stage III data processing (˜9000 files) for the West Gulf River Forecast Center takes about 3 days of computation time instead of months of manual work. To illustrate the radar precipitation database and its visualization capabilities, we present three application examples: (1) GIS-based data visualization and integration, and ArcIMS-based web visualization and publication system, (2) a spatial-temporal analysis of monsoon rainfall patterns over the Rio Grande River Basin, and (3) the potential of GIS-based radar data for distributed watershed models. We conclude by discussing the potential applications of automated techniques for radar rainfall processing and its integration with GIS-based hydrologic information systems.

  16. Evaluating public ambulance service levels by applying a GIS based accessibility analysis approach

    CSIR Research Space (South Africa)

    Baloyi, Ethel

    2017-08-01

    Full Text Available conditions and traffic volumes. To support spatial planning and provide input to the Integrated Development Plan of the City of Tshwane, a GIS based analysis of ambulance response time was undertaken. The purpose was to make recommendations aimed...

  17. A GIS-based framework for evaluating investments in fire management: Spatial allocation of recreation values

    Science.gov (United States)

    Kenneth A. Baerenklau; Armando González-Cabán; Catrina I. Páez; Edgard. Chávez

    2009-01-01

    The U.S. Forest Service is responsible for developing tools to facilitate effective and efficient fire management on wildlands and urban-wildland interfaces. Existing GIS-based fire modeling software only permits estimation of the costs of fire prevention and mitigation efforts as well as the effects of those efforts on fire behavior. This research demonstrates how the...

  18. Regional Environmental Monitoring and Assessment Program Data (REMAP)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Regional Environmental Monitoring and Assessment Program (REMAP) was initiated to test the applicability of the Environmental Monitoring and Assessment Program...

  19. Environmental impact assessment: Process and implementation

    International Nuclear Information System (INIS)

    Chen, S.Y.; Tsai, S.Y.

    1989-01-01

    In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

  20. A simplified GIS-based model for large wood recruitment and connectivity in mountain basins

    Science.gov (United States)

    Lucía, Ana; Antonello, Andrea; Campana, Daniela; Cavalli, Marco; Crema, Stefano; Franceschi, Silvia; Marchese, Enrico; Niedrist, Martin; Schneiderbauer, Stefan; Comiti, Francesco

    2014-05-01

    The mobilization of large wood (LW) elements in mountain rivers channels during floods may increase their hazard potential, especially by clogging narrow sections such as bridges. However, the prediction of LW transport magnitude during flood events is a challenging topic. Although some models on LW transport have been recently developed, the objective of this work was to generate a simplified GIS-based model to identify along the channel network the most likely LW-related critical sections during high-magnitude flood events in forested mountain basins. Potential LW contribution generated by landsliding occurring on hillslopes is assessed using SHALSTAB stability model coupled to a GIS-based connectivity index, developed as a modification of the index proposed by Cavalli et al (2013). Connected slope-derived LW volumes are then summed at each raster cell to LW volumes generated by bank erosion along the erodibile part of river corridors, where bank erosion processes are estimated based on user-defined channel widening ratios stemming from observations following recent extreme events in mountain basins. LW volume in the channel is then routed through the stream network applying simple Boolean rules meant to capture the most important limiting transport condition in these high-energy systems at flood stage, i.e. flow width relative to log length. In addition, the role of bridges and retention check-dams in blocking floating logs is accounted for in the model, in particular bridge length and height are used to characterize their clogging susceptibility for different levels of expected LW volumes and size. The model has been tested in the Rienz and Ahr basins (about 630 km2 each), located in the Eastern Italian Alps. Sixty percent of the basin area is forested, and elevations range from 811 m a.s.l. to 3488 m a.s.l.. We used a 2.5 m resolution DTM and DSM, and their difference was used to calculate the canopy height. Data from 35 plots of the National Forest Inventory

  1. Environmental Assessment Lakeview Geothermal Project

    Energy Technology Data Exchange (ETDEWEB)

    Treis, Tania [Southern Oregon Economic Development Department, Medford, OR (United States)

    2012-04-30

    The Town of Lakeview is proposing to construct and operate a geothermal direct use district heating system in Lakeview, Oregon. The proposed project would be in Lake County, Oregon, within the Lakeview Known Geothermal Resources Area (KGRA). The proposed project includes the following elements: Drilling, testing, and completion of a new production well and geothermal water injection well; construction and operation of a geothermal production fluid pipeline from the well pad to various Town buildings (i.e., local schools, hospital, and Lake County Industrial Park) and back to a geothermal water injection well. This EA describes the proposed project, the alternatives considered, and presents the environmental analysis pursuant to the National Environmental Policy Act. The project would not result in adverse effects to the environment with the implementation of environmental protection measures.

  2. Defining Primary Care Shortage Areas: Do GIS-based Measures Yield Different Results?

    Science.gov (United States)

    Daly, Michael R; Mellor, Jennifer M; Millones, Marco

    2018-02-12

    To examine whether geographic information systems (GIS)-based physician-to-population ratios (PPRs) yield determinations of geographic primary care shortage areas that differ from those based on bounded-area PPRs like those used in the Health Professional Shortage Area (HPSA) designation process. We used geocoded data on primary care physician (PCP) locations and census block population counts from 1 US state to construct 2 shortage area indicators. The first is a bounded-area shortage indicator defined without GIS methods; the second is a GIS-based measure that measures the populations' spatial proximity to PCP locations. We examined agreement and disagreement between bounded shortage areas and GIS-based shortage areas. Bounded shortage area indicators and GIS-based shortage area indicators agree for the census blocks where the vast majority of our study populations reside. Specifically, 95% and 98% of the populations in our full and urban samples, respectively, reside in census blocks where the 2 indicators agree. Although agreement is generally high in rural areas (ie, 87% of the rural population reside in census blocks where the 2 indicators agree), agreement is significantly lower compared to urban areas. One source of disagreement suggests that bounded-area measures may "overlook" some shortages in rural areas; however, other aspects of the HPSA designation process likely mitigate this concern. Another source of disagreement arises from the border-crossing problem, and it is more prevalent. The GIS-based PPRs we employed would yield shortage area determinations that are similar to those based on bounded-area PPRs defined for Primary Care Service Areas. Disagreement rates were lower than previous studies have found. © 2018 National Rural Health Association.

  3. Environmental probabilistic quantitative assessment methodologies

    Science.gov (United States)

    Crovelli, R.A.

    1995-01-01

    In this paper, four petroleum resource assessment methodologies are presented as possible pollution assessment methodologies, even though petroleum as a resource is desirable, whereas pollution is undesirable. A methodology is defined in this paper to consist of a probability model and a probabilistic method, where the method is used to solve the model. The following four basic types of probability models are considered: 1) direct assessment, 2) accumulation size, 3) volumetric yield, and 4) reservoir engineering. Three of the four petroleum resource assessment methodologies were written as microcomputer systems, viz. TRIAGG for direct assessment, APRAS for accumulation size, and FASPU for reservoir engineering. A fourth microcomputer system termed PROBDIST supports the three assessment systems. The three assessment systems have different probability models but the same type of probabilistic method. The type of advantages of the analytic method are in computational speed and flexibility, making it ideal for a microcomputer. -from Author

  4. An Assessment of Environmental Health Needs

    Science.gov (United States)

    Macatangay, Ariel V.

    2013-01-01

    Environmental health fundamentally addresses the physical, chemical, and biological risks external to the human body that can impact the health of a person by assessing and controlling these risks in order to generate and maintain a health-supportive environment. In manned spacecraft, environmental health risks are mitigated by a multi-disciplinary effort, employing several measures including active and passive controls, by establishing environmental standards (SMACs, SWEGs, microbial and acoustics limits), and through environmental monitoring. Human Health and Performance (HHP) scientists and Environmental Control and Life Support (ECLS) engineers consider environmental monitoring a vital component to an environmental health management strategy for maintaining a healthy crew and achieving mission success. ECLS engineers use environmental monitoring data to monitor and confirm the health of ECLS systems, whereas HHP scientists use the data to manage the health of the human system. Because risks can vary between missions and change over time, environmental monitoring is critical. Crew health risks associated with the environment were reviewed by agency experts with the goal of determining risk-based environmental monitoring needs for future NASA manned missions. Once determined, gaps in environmental health knowledge and technology, required to address those risks, were identified for various types of exploration missions. This agency-wide assessment of environmental health needs will help guide the activities/hardware development efforts to close those gaps and advance the knowledge required to meet NASA manned space exploration objectives. Details of the roadmap development and findings are presented in this paper.

  5. Environmental Assessment of R&D Programmes

    DEFF Research Database (Denmark)

    Lyhne, Ivar; Byriel, Inger Pihl

    2013-01-01

    cause severe negative environmental impacts. This paper presents an innovative environmental assessment practice on R&D programmes in Denmark. It reports on the challenges and experiences of assessing the Danish R&D programme ForskEL, which promotes R&D projects within the electricity sector......Despite their important role in shaping the technologies of the future, public research and development (R&D) programmes are rarely based on systematic assessments of the environmental effects. R&D programmes thus allocate a huge amount of financial resources to projects, which potentially may...

  6. Selecting environmental indicator for use in strategic environmental assessment

    International Nuclear Information System (INIS)

    Donnelly, Alison; Jones, Mike; O'Mahony, Tadhg; Byrne, Gerry

    2007-01-01

    The primary aim of carrying out Strategic Environmental Assessment (SEA) is to provide for a high level of environmental protection and to integrate environmental considerations into the planning process. The SEA Directive (2001/42/EC) recommends monitoring to determine the environmental impact of the implementation of plans and programmes. Environmental indicators are a useful tool by which this impact may be measured. However, careful consideration must be given to developing a set of indicators in order to isolate, plan or programme specific impacts. Here, we demonstrate the effectiveness of a workshop-based approach to develop appropriate criteria for selecting environmental indicator for use in SEA. A multi-disciplinary team was used in the approach which consisted of representatives from each of four environmental fields i.e. biodiversity, water, air and climatic factors, together with SEA experts, planning experts, academics and consultants. The team reviewed various sets of criteria, already in existence, for environmental indicator development but not specifically for SEA indicators. The results of this review together with original criteria were applied to the final list agreed upon. Some of the criteria recommended includes, relevance to plan, ability to prioritise, and ability to identify conflict with other plan or SEA objectives

  7. Comparative study of environmental impact assessment methods ...

    African Journals Online (AJOL)

    Environmental Impacts Assessment has been developed as a critically substantial approach to determine, predict and interpret the ecological impact on the environment, public hygiene and healthy ecosystems. This study aims to introduce and systematically investigate the environmental issues during important ...

  8. Assessing Environmental Impact on Aquatic Macrophyte Species ...

    African Journals Online (AJOL)

    Impact of environmental variables on distribution and composition of aquatic macrophyte community in a tropical river was assessed for one year (March 2009 to February 2010). Hypothesis tested was that the spatial variation in environmental variables on the river's longitudinal gradient affects macrophyte species ...

  9. GIS-based modelling of (all) glacier beds in Switzerland

    Science.gov (United States)

    Linsbauer, A.; Paul, F.; Hoelzle, M.; Haeberli, W.

    2009-04-01

    Due to the ongoing and expected future increase in global mean temperature, the Alpine environment will continue to get further away from equilibrium. Glaciers are a part of the high-mountain cryosphere, and their changes are considered to be the best natural indicators of climatic changes. The calculation and visualization of future glacier development is thus an important task of communicating climate change effects to a wider public. One of the most challenging topics in the assessment of climate change impacts on future glacier development is the unknown glacier bed and the related uncertainties in glacier volume estimations (Driedger and Kennard, 1986). In this respect, an estimated topography of the glacier bed would facilitate the calculation of glacier volume, the detection of local depressions, and the visualization of future ice-free grounds. We here present a simple but robust GIS-tool which allows to calculate an approximate bed topography for a large sample of glaciers. The only input used is a DEM, glacier outlines, and a set of flow lines. The method is based on the calculation of the ice thickness along selected points of the flow lines from the shallow ice approximation and subsequent spatial interpolation using topogrid and is independent of glacier size, type or climatic setting. The generated ice thickness distribution is in good agreement with direct measurements (GPR profiles) and results from more sophisticated methods that include assumptions on glacier flow. However, local derivations exist due to the very sensitive dependence on surface slope.

  10. Risk communication in environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rahm-Crites, L. [Lawrence Livermore National Lab., Germantown, MD (United States). Washington Operations Office

    1996-08-26

    Since the enactment of NEPA and other environmental legislation, the concept of `risk communication` has expanded from simply providing citizens with scientific information about risk to exploring ways of making risk information genuinely meaningful to the public and facilitating public involvement in the very processes whereby risk is analyzed and managed. Contemporary risk communication efforts attempt to find more effective ways of conveying increasingly complex risk information and to develop more democratic and proactive approaches to community involvement, in particular to ensuring the participation of diverse populations in risk decisions. Although considerable progress has been made in a relatively short time, risk communication researchers and practitioners currently face a number of challenges in a time of high expectations, low trust, and low budgets.

  11. Biological Environmental Sampling Technologies Assessment

    Science.gov (United States)

    2015-12-01

    assay performance for the detection of target pathogens or protein biomarkers in liquid matrices. The nanomanipulation technology provides a dramatic...personal protective equipment qPCR quantitative polymerase chain reaction RAID Rapid Assessment Initial Detection kit RFI request for information RT...Carrie Poore Robert Dorsey RESEARCH AND TECHNOLOGY DIRECTORATE Aaron Chonko David Grieco JOINT BIOLOGICAL TACTICAL DETECTION SYSTEM

  12. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    International Nuclear Information System (INIS)

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R ampersand D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI)

  13. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

  14. Environmental assessment, proposed generating station for Darlington

    International Nuclear Information System (INIS)

    1975-04-01

    This document indicates the intention of Ontario Hydro to seek approval from the Provincial Government for its plan to construct and operate a 3400 MWe nuclear generating station at the Darlington site, west of Bowmanville. This preliminary proposal also contains the environmental assessment. The environmental section of this proposal describes and assesses the existing environment and the environmental influences which would occur due to the construction and operation of a nuclear generating station, consisting of four 850 MW units, at the Darlington site. This proposed station is similar to the Bruce GS A station presently under construction. (author)

  15. Documentation of Cultural Heritages Using a GIS Based Information and Management System; Case Study of Safranbolu

    Science.gov (United States)

    Seker, D. Z.; Alkan, M.; Kutoglu, S. S.; Akcin, H.

    2010-12-01

    Documentation of the cultural heritage sites is extremely important for monitoring and preserves them from natural disasters and human made activities. Due to its very rich historical background from the first human settlements in Catalhoyuk and Alacahoyuk and civilizations such as Byzantine, Seljuk and Ottoman, there are lots of cultural heritage sites in Turkey. 3D modeling and recording of historical buildings using modern tools and techniques in several locations of Turkey have been conducted and still continuing. The nine cultural sites in Turkey are included in the protection list of UNESCO as cultural heritage and one of them is the township of Safranbolu, which is the one of the most outstanding example of the traditional Turkish Architecture and also unique itself in terms of conservation of the human settlement in their authentic environmental motif up till now. In this study outcomes and further studies of a research project related to study area which is supported by the Turkish National Research Center (TUBITAK) with the project number 106Y157, will be presented in details. The basic aim of the study is development a GIS based information and management system for the city of Safranbolu. All historical buildings which are registered are assigned with the database. 3D modeling some of the selected building among the buildings which are registered as historical monuments using different data comes from different sources similar to their original constructions were realized and then it will be distributed via internet by a web-based information system designed during the project. Also some of the buildings were evaluated using close range photogrammetric technique to obtain their façade reliefs, were also assigned with the database. Designed database consists of 3D models, locations, historical information, cadastral and land register data of the selected buildings together with the other data collected during the project related to buildings. Using this

  16. GIS-based Approaches to Catchment Area Analyses of Mass Transit

    DEFF Research Database (Denmark)

    Andersen, Jonas Lohmann Elkjær; Landex, Alex

    2009-01-01

    Catchment area analyses of stops or stations are used to investigate potential number of travelers to public transportation. These analyses are considered a strong decision tool in the planning process of mass transit especially railroads. Catchment area analyses are GIS-based buffer and overlay...... analyses with different approaches depending on the desired level of detail. A simple but straightforward approach to implement is the Circular Buffer Approach where catchment areas are circular. A more detailed approach is the Service Area Approach where catchment areas are determined by a street network...... search to simulate the actual walking distances. A refinement of the Service Area Approach is to implement additional time resistance in the network search to simulate obstacles in the walking environment. This paper reviews and compares the different GIS-based catchment area approaches, their level...

  17. Environmental assessment of biomass based materials

    DEFF Research Database (Denmark)

    Jørgensen, Susanne Vedel

    level. The temporal scope is defined by the impact category considered. The technological scope includes both current environmental performance of biomaterials and a discussion of future perspectives, including potentials for future change in their environmental impacts compared to fossil based......Goal and scope The goal of this PhD project is to contribute to a more consistent methodology for life cycle assessment (LCA) of biomaterials and to address the environmental performance and perspectives of biomaterials. In particular, it is the goal to develop an approach for dealing...... production is increasing. As the demand for biomaterials increases, so does the need for knowledge about their environmental performance – both in absolute terms and relative to the petrochemical counterparts that they may replace. LCA is a commonly used tool for assessing environmental sustainability...

  18. Identifying Dominant Runoff Processes at a Regional Scale – A GIS - Based Approach

    Directory of Open Access Journals (Sweden)

    Joseph Fagbohun Babatunde

    2017-10-01

    Full Text Available Identifying landscapes with similar hydrological characteristics is useful for the determination of dominant runoff process (DRP and flood prediction. Several approaches used for DRP-mapping differ in respect to time and data requirement. Manual approaches based on field investigation and expert knowledge are time consuming and difficult to implement at regional scale. Automatic GIS-based approach on the other hand require simplification of data but are easier to implement and it is applicable on regional scale.

  19. Environmental assessment of stillage control

    Energy Technology Data Exchange (ETDEWEB)

    Barney, W. K.; Chang, H.

    1980-01-01

    The US government is encouraging increased production and use of gasohol in an effort to make the United States more energy independent. The current national goal is to substitute gasohol for 10% of the unleaded gasoline consumed in the United States by th end of 1980. Increased production of fuel ethanol in the years to come seems certain. In producing fuel ethanol (200 proof) from biomass feedstocks by fermentation, a liquid residue called stillage is produced. The concentration of BOD/sub 5/ in stillage is usually high compared to that in domestic waste, and this residue must go through a waste treatment process before discharge into bodies of water. While stillage has potential uses as an animal feed, soil amendment, and protein source for humans, the liquid remaining after useful stillage components have been extracted must still be treated before discharge to the environment. This paper identifies the types of stillage that are produced as well as their control. The concept of stillage control in the context of this paper includes both the uses and environmental control technology needs of stillage.

  20. Institutional Assessment of Environmentally Oriented Subsoil Use

    Directory of Open Access Journals (Sweden)

    Irina Gennadyevna Polyanskaya

    2017-06-01

    Full Text Available The article solves two relevant problems related to the implementation of the institutional assessment of environmentally oriented subsoil use: 1 the definition of the ‘environmental security’ and 2 the determination of the development level of institutional bases of environmentally oriented subsoil use including the institutional capacity of subsoil use and institutional capacity of environmental security. The article shows an analysis of the existing definitions of “environmental security” and offers the own one. Despite the significant national and foreign experience in the institutional capacity assessment of various processes, there are still some difficulties in defining and measuring the institutional capacity. We eliminate these difficulties by employing 1 original factors, previously identified, and the content of the “institutional capacity” term; 2 quality characteristics for the institutional capacity assessment of the process regulated at the macroeconomic level, and 3 a consistent methodological tool for the institutional assessment of environmentally oriented subsoil use. The study is based on the hypothesis of the necessity of legal and discreet state intervention in the process of subsoil use. Therefore, we identify the evaluation indicator of state regulation in the environmentally oriented subsoil use as the institutional capacity level calculated by using the fuzzy-set theory. As a result, the institutional capacity levels of the environmentally oriented subsoil use have been defined for both the transport corridor «Arctic-Central Asia» and for the countries composing it. The obtained values of the assessment of institutional capacity levels of the environmentally oriented subsoil use can serve as a basis for identifying the vector of its increase

  1. Burden of disease attributed to ambient air pollution in Thailand: A GIS-based approach.

    Directory of Open Access Journals (Sweden)

    Chayut Pinichka

    Full Text Available Growing urbanisation and population requiring enhanced electricity generation as well as the increasing numbers of fossil fuel in Thailand pose important challenges to air quality management which impacts on the health of the population. Mortality attributed to ambient air pollution is one of the sustainable development goals (SDGs. We estimated the spatial pattern of mortality burden attributable to selected ambient air pollution in 2009 based on the empirical evidence in Thailand.We estimated the burden of disease attributable to ambient air pollution based on the comparative risk assessment (CRA framework developed by the World Health Organization (WHO and the Global Burden of Disease study (GBD. We integrated geographical information systems (GIS-based exposure assessments into spatial interpolation models to estimate ambient air pollutant concentrations, the population distribution of exposure and the concentration-response (CR relationship to quantify ambient air pollution exposure and associated mortality. We obtained air quality data from the Pollution Control Department (PCD of Thailand surface air pollution monitoring network sources and estimated the CR relationship between relative risk (RR and concentration of air pollutants from the epidemiological literature.We estimated 650-38,410 ambient air pollution-related fatalities and 160-5,982 fatalities that could have been avoided with a 20 reduction in ambient air pollutant concentrations. The summation of population-attributable fraction (PAF of the disease burden for all-causes mortality in adults due to NO2 and PM2.5 were the highest among all air pollutants at 10% and 7.5%, respectively. The PAF summation of PM2.5 for lung cancer and cardiovascular disease were 16.8% and 14.6% respectively and the PAF summations of mortality attributable to PM10 was 3.4% for all-causes mortality, 1.7% for respiratory and 3.8% for cardiovascular mortality, while the PAF summation of mortality

  2. GIS based site and structure selection model for groundwater recharge: a hydrogeomorphic approach.

    Science.gov (United States)

    Vijay, Ritesh; Sohony, R A

    2009-10-01

    The groundwater in India is facing a critical situation due to over exploitation, reduction in recharge potential by change in land use and land cover and improper planning and management. A groundwater development plan needs a large volume of multidisciplinary data from various sources. A geographic information system (GIS) based hydrogeomorphic approach can provide the appropriate platform for spatial analysis of diverse data sets for decision making in groundwater recharge. The paper presents development of GIS based model to provide more accuracy in identification and suitability analysis for finding out zones and locating suitable sites with suggested structures for artificial recharge. Satellite images were used to prepare the geomorphological and land use maps. For site selection, the items such as slope, surface infiltration, and order of drainage were generated and integrated in GIS using Weighted Index Overlay Analysis and Boolean logics. Similarly for identification of suitable structures, complex matrix was programmed based on local climatic, topographic, hydrogeologic and landuse conditions as per artificial recharge manual of Central Ground Water Board, India. The GIS based algorithm is implemented in a user-friendly way using arc macro language on Arc/Info platform.

  3. Recovery in environmental risk assessment at EFSA

    NARCIS (Netherlands)

    Brock, T.C.M.

    2016-01-01

    EFSA performs environmental risk assessments (ERAs) for single potential stressors such as plant protection products, genetically modified organisms and feed additives and for invasive alien species that are harmful for plant health. In this risk assessment domain, the EFSA Scientific Committee

  4. Environmental Justice Assessment for Transportation

    International Nuclear Information System (INIS)

    Mills, G.S.; Neuhauser, K.S.

    1999-01-01

    Application of Executive Order 12898 to risk assessment of highway or rail transport of hazardous materials has proven difficult; the location and conditions affecting the propagation of a plume of hazardous material released in a potential accident are unknown, in general. Therefore, analyses have only been possible in geographically broad or approximate manner. The advent of geographic information systems and development of software enhancements at Sandia National Laboratories have made kilometer-by-kilometer analysis of populations tallied by U.S. Census Blocks along entire routes practicable. Tabulations of total, or racially/ethnically distinct, populations close to a route, its alternatives, or the broader surrounding area, can then be compared and differences evaluated statistically. This paper presents methods of comparing populations and their racial/ethnic compositions using simple tabulations, histograms and Chi Squared tests for statistical significance of differences found. Two examples of these methods are presented: comparison of two routes and comparison of a route with its surroundings

  5. Environmental impact assessment - a selected bibliography

    International Nuclear Information System (INIS)

    Lawson, W.J.

    1989-01-01

    This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

  6. Methodology of environmental risk assessment management

    Directory of Open Access Journals (Sweden)

    Saša T. Bakrač

    2012-04-01

    Full Text Available Successful protection of environment is mostly based on high-quality assessment of potential and present risks. Environmental risk management is a complex process which includes: identification, assessment and control of risk, namely taking measures in order to minimize the risk to an acceptable level. Environmental risk management methodology: In addition to these phases in the management of environmental risk, appropriate measures that affect the reduction of risk occurrence should be implemented: - normative and legal regulations (laws and regulations, - appropriate organizational structures in society, and - establishing quality monitoring of environment. The emphasis is placed on the application of assessment methodologies (three-model concept, as the most important aspect of successful management of environmental risk. Risk assessment methodology - European concept: The first concept of ecological risk assessment methodology is based on the so-called European model-concept. In order to better understand this ecological risk assessment methodology, two concepts - hazard and risk - are introduced. The European concept of environmental risk assessment has the following phases in its implementation: identification of hazard (danger, identification of consequences (if there is hazard, estimate of the scale of consequences, estimate of consequence probability and risk assessment (also called risk characterization. The European concept is often used to assess risk in the environment as a model for addressing the distribution of stressors along the source - path - receptor line. Risk assessment methodology - Canadian concept: The second concept of the methodology of environmental risk assessment is based on the so-called Canadian model-concept. The assessment of ecological risk includes risk arising from natural events (floods, extreme weather conditions, etc., technological processes and products, agents (chemical, biological, radiological, etc

  7. Macroalgae Analysis A National GIS-based Analysis of Macroalgae Production Potential Summary Report and Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Roesijadi, Guritno; Coleman, Andre M.; Judd, Chaeli; Van Cleve, Frances B.; Thom, Ronald M.; Buenau, Kate E.; Tagestad, Jerry D.; Wigmosta, Mark S.; Ward, Jeffrey A.

    2011-12-01

    The overall project objective is to conduct a strategic analysis to assess the state of macroalgae as a feedstock for biofuels production. The objective in FY11 is to develop a multi-year systematic national assessment to evaluate the U.S. potential for macroalgae production using a GIS-based assessment tool and biophysical growth model developed as part of these activities. The initial model development for both resource assessment and constraints was completed and applied to the demonstration areas. The model for macroalgal growth was extended to the EEZ off the East and West Coasts of the United States, and a plan to merge the findings for an initial composite assessment was developed. In parallel, an assessment of land-based, port, and offshore infrastructure needs based on published and grey literature was conducted. Major information gaps and challenges encountered during this analysis were identified. Also conducted was an analysis of the type of local, state, and federal requirements that pertain to permitting land-based facilities and nearshore/offshore culture operations

  8. Predictions of models for environmental radiological assessment

    International Nuclear Information System (INIS)

    Peres, Sueli da Silva; Lauria, Dejanira da Costa; Mahler, Claudio Fernando

    2011-01-01

    In the field of environmental impact assessment, models are used for estimating source term, environmental dispersion and transfer of radionuclides, exposure pathway, radiation dose and the risk for human beings Although it is recognized that the specific information of local data are important to improve the quality of the dose assessment results, in fact obtaining it can be very difficult and expensive. Sources of uncertainties are numerous, among which we can cite: the subjectivity of modelers, exposure scenarios and pathways, used codes and general parameters. The various models available utilize different mathematical approaches with different complexities that can result in different predictions. Thus, for the same inputs different models can produce very different outputs. This paper presents briefly the main advances in the field of environmental radiological assessment that aim to improve the reliability of the models used in the assessment of environmental radiological impact. The intercomparison exercise of model supplied incompatible results for 137 Cs and 60 Co, enhancing the need for developing reference methodologies for environmental radiological assessment that allow to confront dose estimations in a common comparison base. The results of the intercomparison exercise are present briefly. (author)

  9. Methods of Environmental Impact Assessment in Colombia

    Directory of Open Access Journals (Sweden)

    Javier Toro Calderón

    2013-10-01

    Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

  10. GIS-Based Detection of Gullies in Terrestrial LiDAR Data of the Cerro Llamoca Peatland (Peru

    Directory of Open Access Journals (Sweden)

    Markus Forbriger

    2013-11-01

    Full Text Available Cushion peatlands are typical features of the high altitude Andes in South America. Due to the adaptation to difficult environmental conditions, they are very fragile ecosystems and therefore vulnerable to environmental and climate changes. Peatland erosion has severe effects on their ecological functions, such as water storage capacity. Thus, erosion monitoring is highly advisable. Erosion quantification and monitoring can be supported by high-resolution terrestrial Light Detection and Ranging (LiDAR. In this study, a novel Geographic Information System (GIS-based method for the automatic delineation and geomorphometric description of gullies in cushion peatlands is presented. The approach is a multi-step workflow based on a gully edge extraction and a sink filling algorithm applied to a conditioned digital terrain model. Our method enables the creation of GIS-ready polygons of the gullies and the derivation of geomorphometric parameters along the entire channel course. Automatically derived boundaries and gully area values correspond to a high degree (93% with manually digitized reference polygons. The set of methods developed in this study offers a suitable tool for the monitoring and scientific analysis of fluvial morphology in cushion peatlands.

  11. Environmental impact assessment of nuclear desalination

    International Nuclear Information System (INIS)

    2010-03-01

    Nuclear desalination is gaining interest among the IAEA Member States, as indicated by the planned projects, and it is expected that the number of nuclear desalination plants will increase in the near future. The IAEA has already provided its Member States with reports and documents that disseminate information regarding the technical and economic feasibility of nuclear desalination. With the rising environmental awareness, in the scope of IAEA's activities on seawater desalination using nuclear power, a need was identified for a report that would provide a generic assessment of the environmental issues in nuclear desalination. In order to offer an overview of specific environmental impacts which are to be expected, their probable magnitude, and recommended mitigation measures, this publication encompasses information provided by the IAEA Member States as well as other specialized sources. It is intended for decision makers and experts dealing with environmental, desalination and water management issues, offering insight into the environmental aspects that are essential in planning and developing nuclear desalination

  12. Assessment of Environmental Impact of Thai Housing

    OpenAIRE

    Tikul, Nachawit; Srichandr, Panya

    2011-01-01

    Building and construction has consumed a lot of various resources and emitted pollution.  These cause environmental problems, especially global warming.  The buildings and constructions in various regions and different styles will lead to different environmental problems and levels of seriousness.   The objective of this research is to assess the global warming impact from the use of construction materials in residential buildings since this type of buildin...

  13. Strategic Environmental Assessment and Sustainable Development

    Science.gov (United States)

    Tian, Mingjing; Gao, Qingjun; Wang, Nan; Yang, Xigen; Xu, Xin; Zhang, Lu

    2018-04-01

    The development of social science and technology economy, the international community more and more attention to environmental and development issues. So the main goal pursued by people is not only to meet the needs of social and natural resources, while at the same time being able to protect the needs of future generations. This is the path of sustainable development. Therefore, this paper is a detailed study of strategic environmental assessment and sustainable development.

  14. Environmental Assessment - Gotten across to industrial designers

    DEFF Research Database (Denmark)

    Bey, Niki

    2002-01-01

    This paper deals with a simplified method for environmental assessment for designers, the Oil Point Method (OPM). The paper explains characteristics of the method, such as the reduced problem with missing data, and describes how the method is used with its three steps, “FOCUS on the problem...... into an Internet-based design tool, and results and conclusions from four empirical tests with environmentally non-skilled designers are presented....

  15. Environmental assessment of nanomaterial use in Denmark

    DEFF Research Database (Denmark)

    Kjølholt, Jesper; Gottschalk, Fadri; Brinch, Anna

    This is the concluding report of the project "Nanomaterials – occurrence and effects in the Danish environment" (abbreviated NanoDEN), which part the Danish Government's initiative "Better Control of Nanomaterials" (“Bedre styr på nanomaterialer”) which is administered by the Danish Environmental...... Protection Agency. The projects in NanoDEN have aimed to investigate and generate new environmentally relevant knowledge on of nanomaterials on the Danish market and to assess the possible associated risks to the environment. The results from the sub-projects are summarized in the current report...... and it is assessed whether and how nanomaterials may pose a risk for the environment in Denmark. The assessment is based on investigations of nine selected nanomaterials, which are expected to be environmentally relevant based on knowledge of consumption quantities or how they are used. These data contribute...

  16. Comprehensive environmental assessment and response program

    International Nuclear Information System (INIS)

    Gunderson, T.C.; Vocke, R.W.; Stoker, A.K.

    1986-01-01

    The U.S. Department of Energy's (USDOE) Albuquerque Operations Office installations are being evaluated under its Comprehensive Environmental Assessment and Response Program (CEARP). The installations consist of eight weapons development and production facilities, which are located across the United States. The evaluation covers the major environmental regulations, with emphasis on the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and on the Resource Conservation and Recovery Act (RCRA). The CEARP is intended to help fulfill USDOE obligations for federal facilities under the U.S. Environmental Protection Agency (USEPA) CERCLA Program and constitutes the same basic approach as contained in USEPA guidance to federal facilities. The Program is a phased program to identify, assess, and correct existing and potential environmental concerns relative to these regulations. The five phases are Phase I - Installation Assessment, Phase II - Confirmation, Phase III - Technological Assessment, Phase IV - Remedial Action, and Phase V - Compliance and Verification. Phase I activities and reports should be completed during 1986. The Phase II generic sampling plans, data management plans, health and safety plans, and quality assurance/quality control plans will be prepared during 1986. Significant characterization of CERCLA sites will be initiated during 1987

  17. Environmental assessment, Pinellas Plant site, Petersburg, Florida

    International Nuclear Information System (INIS)

    1983-07-01

    The purpose of this environmental assessment is to describe the operations at the Pinellas Plant, discuss the locale in which the plant is situated and assess the actual and possible impacts of plant operation on the surrounding environment. The facility and the local environment are described; impacts on the economy, local community and the environment discussed, and alternatives presented. A comparison of the environmental impact of operating the Pinellas Plant versus the benefits gained by its operation suggests that the plant should continue its function of supplying nuclear weapons components for the US Department of Energy

  18. Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

    Science.gov (United States)

    Cho, N.; Lee, M. J.; Maeng, J. H.

    2017-12-01

    Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

  19. Environmental impact assessments for energy production

    International Nuclear Information System (INIS)

    Loevblad, Gun; Skaerby, Lena

    2000-06-01

    The report is the final report from a jointly financed project within lVL studying methodology for environmental impact assessments (EIAs). The aim has been to show possibilities and problems with EIAs for air pollution emissions from energy production plants in environments where critical loads and levels are exceeded. The project has mainly dealt with plants emitting air pollutants with environmental effects on the regional scale, including sulphur and nitrogen compounds, volatile organic compounds and particles, and effects such as acidification, eutrophication and ozone formation. Conclusions from the work are that project managers, environmental auditors, together with regional and local authorities could have use for better and more detailed guidelines, in the form of more detailed emission data from different types of alternative plants; Guidelines for the elaborating and assessing of relevant zero alternatives; Regional environmental goals and guidelines for the acceptable contribution to these by different activities; Criteria for the definition of the areas of 'environmental influence'. Furthermore, quantitative relationships between exposure and effects may contribute to better and more detailed descriptions of environmental impact and the need of decreasing the load for the recovery of polluted ecosystems

  20. Environmental impact assessment around TRIGA research reactor

    International Nuclear Information System (INIS)

    Lee, Jeong Ho; Lee, Hyun Duk; Lee, Young Bok; Cheong, Kyu Hoi; Ahn, Jong Sung; Kim, Kug Chan; You, Byung Sun; Kim, Byung Woo; Kim, Sang Bok; Han Moon Hee

    1985-01-01

    Population distribution, atmospheric change, X/Q, characteristics of terrestrial ecosystem around Seoul site were surveyed. Environmental radiation and radioactivities such as grossα, grossβ, Cs-137, Sr-90 and H-3 of various environmental samples were analyzed. The values of environmental radiation dose tended to increase gradually in the light of the recent five years' results of environmental radiation monitoring around the nuclear power plants from 1980 to 1984, however, the changes were not significant. In addition, continuous assessment of environmental radiation monitoring on the roofs of main building and life science building at KAERI showed that the environmental radiation dose tended to increase a little during the night time. Judging from the above results, it is concluded that environmental contamination level by radioactive materials could be ignored in the case of radioisotope production or experiment using radioisotopes except the release of gaseous radioactive materials such as Ar-41 of short half life by the operation of nuclear reactor. (Author)

  1. Environmental radiation exposure: Regulation, monitoring, and assessment

    International Nuclear Information System (INIS)

    Chen, S.Y.; Yu, C.; Hong, K.J.

    1991-01-01

    Radioactive releases to the environment from nuclear facilities constitute a public health concern. Protecting the public from such releases can be achieved through the establishment and enforcement of regulatory standards. In the United States, numerous standards have been promulgated to regulate release control at nuclear facilities. Most recent standards are more restrictive than those in the past and require that radioactivity levels be as low as reasonably achievable (ALARA). Environmental monitoring programs and radiological dose assessment are means of ensuring compliance with regulations. Environmental monitoring programs provide empirical information on releases, such as the concentrations of released radioactivity in environmental media, while radiological dose assessment provides the analytical means of quantifying dose exposures for demonstrating compliance

  2. The value of environmental impact assessments

    International Nuclear Information System (INIS)

    Sohocki, D.D.

    1996-01-01

    The environment and the economy are inextricably linked. Today the environmental, economic, and social associated with project and program decisions are at times of such a magnitude and duration that they exceed our ability to understand, let alone mitigate them. Energy production, distribution, pricing, policies, end uses, and externalities demonstrate the need for wise planning and informed decision making. International cooperation, based upon mutually shared respect, responsibility, and innovative solutions is an essential component of addressing contemporary issues, impacts, and opportunities. Both egypt and the united states have laws requiring environmental impact assessments. Just as egypt can learn from our successes and failures in the environmental impact assessment field over the past 36 years, the united states and other nations can learn as egypt develops and innovates its own approaches and solutions

  3. Risk and environmental impact assessment: nuclear and environmental licensing interface

    International Nuclear Information System (INIS)

    Costa, Eduardo M.; Monteiro, Iara A.

    1997-01-01

    The main aims of this paper are the identification and discussion of interfaces and application of common concepts in the existing nuclear and environmental licensing procedures. Risk and impact assessment of nuclear electricity generation are two of these concepts which are discussed detail. The risk concept, which had initially focused on engineering projects, has been extended to many other areas of human activity. Risk resulting from the use of ionization radiation has been associated to the dose for the critical members of the public. Therefore, radiation protection applies basic dose limits which are established in national and international recommendations. These recommendations are increasing the emphasis to keep all the exposures to ionizing radiation as low as reasonable achievable, economical and social factors being taken into account. On the other hand, environmental impact assessment has been used as a tool in planning and decision-making processes, thus including environmental concern in the discussion of social and economical development strategies. This paper aims to discuss the association of these two concepts by presenting the procedures of control of radiological impact during normal operation of a nuclear power plant and the various forms of risk communication to the public in the case of events occurrence. (author). 13 refs

  4. Eastern forest environmental threat assessment center

    Science.gov (United States)

    Southern Research Station. USDA Forest Service

    2010-01-01

    The Eastern Forest Environmental Threat Assessment Center (EFETAC) provides the latest research and expertise concerning threats to healthy forests – such as insects and disease, wildland loss, invasive species, wildland fire, and climate change – to assist forest landowners, managers and scientists throughout the East. Established in 2005, EFETAC is a joint effort of...

  5. The biological basis for environmental quality assessments

    International Nuclear Information System (INIS)

    Karpov, V.I.; Kudritsky, Y.K.; Georgievsky, A.B.

    1991-01-01

    A systematic approach is required to environmental quality assessments with regard to the Baltic regions in order to address the problem of pollution abatement. The proposed systematization of adaptive states stems from the general theory of adaptation. The various types of adaption are described. (AB)

  6. Environmental Impact Assessment in Sustainable Water Resources ...

    African Journals Online (AJOL)

    The sustainable development of water resources is a multi-dimensional way of thinking about the connections or interdependencies among natural, social, and economic systems in the use of water. The purpose of environmental impact assessment is to guarantee a sustainable development that is in harmony with human ...

  7. GEOLOGY AND ENVIRONMENTAL IMPACT ASSESSMENT AND ...

    African Journals Online (AJOL)

    Dr Osondu

    GEOLOGY AND ENVIRONMENTAL IMPACT ASSESSMENT AND BENEFIT OF. GRANITIC ROCKS OF MINNA AREA, NORTHWESTERN NIGERIA. Alabi, A. A.. DOI: http://dx.doi.org/10.4314/ejesm.v4i4.5. Received November 23rd 2011; accepted December 5th 2011. Abstract. Nigeria basement complex has shown that the ...

  8. 78 FR 25297 - Programmatic Environmental Assessment

    Science.gov (United States)

    2013-04-30

    ...-FF04R02000] Programmatic Environmental Assessment AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of intent. SUMMARY: We, the Fish and Wildlife Service (Service), intend to prepare a programmatic... addresses, dates, and times of meetings will be announced through local and regional media. Public...

  9. Comparing GIS-based measures in access to mammography and their validity in predicting neighborhood risk of late-stage breast cancer.

    Science.gov (United States)

    Lian, Min; Struthers, James; Schootman, Mario

    2012-01-01

    Assessing neighborhood environment in access to mammography remains a challenge when investigating its contextual effect on breast cancer-related outcomes. Studies using different Geographic Information Systems (GIS)-based measures reported inconsistent findings. We compared GIS-based measures (travel time, service density, and a two-Step Floating Catchment Area method [2SFCA]) of access to FDA-accredited mammography facilities in terms of their Spearman correlation, agreement (Kappa) and spatial patterns. As an indicator of predictive validity, we examined their association with the odds of late-stage breast cancer using cancer registry data. The accessibility measures indicated considerable variation in correlation, Kappa and spatial pattern. Measures using shortest travel time (or average) and service density showed low correlations, no agreement, and different spatial patterns. Both types of measures showed low correlations and little agreement with the 2SFCA measures. Of all measures, only the two measures using 6-timezone-weighted 2SFCA method were associated with increased odds of late-stage breast cancer (quick-distance-decay: odds ratio [OR] = 1.15, 95% confidence interval [CI] = 1.01-1.32; slow-distance-decay: OR = 1.19, 95% CI = 1.03-1.37) after controlling for demographics and neighborhood socioeconomic deprivation. Various GIS-based measures of access to mammography facilities exist and are not identical in principle and their association with late-stage breast cancer risk. Only the two measures using the 2SFCA method with 6-timezone weighting were associated with increased odds of late-stage breast cancer. These measures incorporate both travel barriers and service competition. Studies may observe different results depending on the measure of accessibility used.

  10. Comparing GIS-based measures in access to mammography and their validity in predicting neighborhood risk of late-stage breast cancer.

    Directory of Open Access Journals (Sweden)

    Min Lian

    Full Text Available Assessing neighborhood environment in access to mammography remains a challenge when investigating its contextual effect on breast cancer-related outcomes. Studies using different Geographic Information Systems (GIS-based measures reported inconsistent findings.We compared GIS-based measures (travel time, service density, and a two-Step Floating Catchment Area method [2SFCA] of access to FDA-accredited mammography facilities in terms of their Spearman correlation, agreement (Kappa and spatial patterns. As an indicator of predictive validity, we examined their association with the odds of late-stage breast cancer using cancer registry data.The accessibility measures indicated considerable variation in correlation, Kappa and spatial pattern. Measures using shortest travel time (or average and service density showed low correlations, no agreement, and different spatial patterns. Both types of measures showed low correlations and little agreement with the 2SFCA measures. Of all measures, only the two measures using 6-timezone-weighted 2SFCA method were associated with increased odds of late-stage breast cancer (quick-distance-decay: odds ratio [OR] = 1.15, 95% confidence interval [CI] = 1.01-1.32; slow-distance-decay: OR = 1.19, 95% CI = 1.03-1.37 after controlling for demographics and neighborhood socioeconomic deprivation.Various GIS-based measures of access to mammography facilities exist and are not identical in principle and their association with late-stage breast cancer risk. Only the two measures using the 2SFCA method with 6-timezone weighting were associated with increased odds of late-stage breast cancer. These measures incorporate both travel barriers and service competition. Studies may observe different results depending on the measure of accessibility used.

  11. Comprehensive environmental assessment: a meta-assessment approach.

    Science.gov (United States)

    Powers, Christina M; Dana, Genya; Gillespie, Patricia; Gwinn, Maureen R; Hendren, Christine Ogilvie; Long, Thomas C; Wang, Amy; Davis, J Michael

    2012-09-04

    With growing calls for changes in the field of risk assessment, improved systematic approaches for addressing environmental issues with greater transparency and stakeholder engagement are needed to ensure sustainable trade-offs. Here we describe the comprehensive environmental assessment (CEA) approach as a holistic way to manage complex information and to structure input from diverse stakeholder perspectives to support environmental decision-making for the near- and long-term. We further note how CEA builds upon and incorporates other available tools and approaches, describe its current application at the U.S. Environmental Protection Agency, and point out how it could be extended in evaluating a major issue such as the sustainability of biofuels.

  12. Road ecology in environmental impact assessment

    International Nuclear Information System (INIS)

    Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

    2014-01-01

    Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

  13. Statistical Approaches in GIS-Based Techniques for Sustainable Planning: Kayaçukuru Case

    OpenAIRE

    Aygun Erdogan

    2003-01-01

    The purpose of this study is to make both a summary and additional descriptive and inferential statistical analyses for a completed thesis on "Sustainable/Environment Friendly Development Planning of Fethiye-Kayaçukuru Using GIS-Based Techniques" (M.Sc. in the Graduate School of Geodetic and Geographic Information Technologies, Middle East Technical University, Supervisor: Assoc.Prof.Dr. Oğuz Işık, September 2000, 214 pages). The statistical analyses explained in this paper comprise a part of...

  14. Evaluation of AirGIS: a GIS-based air pollution and human exposure modelling system

    DEFF Research Database (Denmark)

    Ketzel, Matthias; Berkowicz, Ruwim; Hvidberg, Martin

    2011-01-01

    shows, in general, a good performance for both long-term averages (annual and monthly averages), short-term averages (hourly and daily) as well as when reproducing spatial variation in air pollution concentrations. Some shortcomings and future perspectives of the system are discussed too.......This study describes in brief the latest extensions of the Danish Geographic Information System (GIS)-based air pollution and human exposure modelling system (AirGIS), which has been developed in Denmark since 2001 and gives results of an evaluation with measured air pollution data. The system...

  15. Assessing the Environmental Risks of Nanomaterials

    DEFF Research Database (Denmark)

    Grieger, Khara Deanne; Hansen, Steffen Foss; Baun, Anders

    of uncertainty, degree of precaution, inclusion of quantitative or qualitative data, inclusion of life-cycle perspective, iterative and/or adaptive, ensuring timely decision making, and degree of transparency. This analysis can ultimately assist scientists, government agencies, organizations, and other...... to a wide range of technical limitations. For instance, serious knowledge gaps remain within e.g. the detection of NM in the environment, developing adequate testing equipment and protocols, and toxicity endpoints (Grieger et al., 2009). In the past few years, many scientists and organizations have...... proposed the use of other risk assessment tools and frameworks (Grieger et al., 2009- submitted,). In the present work, we compare different environmental risk assessment and analysis frameworks proposed for NM, including multicriteria decision analysis, comprehensive environmental assessment, and Nano...

  16. Determining Vulnerability Importance in Environmental Impact Assessment

    International Nuclear Information System (INIS)

    Toro, Javier; Duarte, Oscar; Requena, Ignacio; Zamorano, Montserrat

    2012-01-01

    The concept of vulnerability has been used to describe the susceptibility of physical, biotic, and social systems to harm or hazard. In this sense, it is a tool that reduces the uncertainties of Environmental Impact Assessment (EIA) since it does not depend exclusively on the value assessments of the evaluator, but rather is based on the environmental state indicators of the site where the projects or activities are being carried out. The concept of vulnerability thus reduces the possibility that evaluators will subjectively interpret results, and be influenced by outside interests and pressures during projects. However, up until now, EIA has been hindered by a lack of effective methods. This research study analyzes the concept of vulnerability, defines Vulnerability Importance and proposes its inclusion in qualitative EIA methodology. The method used to quantify Vulnerability Importance is based on a set of environmental factors and indicators that provide a comprehensive overview of the environmental state. The results obtained in Colombia highlight the usefulness and objectivity of this method since there is a direct relation between this value and the environmental state of the departments analyzed. - Research Highlights: ► The concept of vulnerability could be considered defining Vulnerability Importance included in qualitative EIA methodology. ► The use of the concept of environmental vulnerability could reduce the subjectivity of qualitative methods of EIA. ► A method to quantify the Vulnerability Importance proposed provides a comprehensive overview of the environmental state. ► Results in Colombia highlight the usefulness and objectivity of this method.

  17. New technologies - How to assess environmental effects

    Science.gov (United States)

    Sullivan, P. J.; Lavin, M. L.

    1981-01-01

    A method is provided for assessing the environmental effects of a room-and-pillar mining system (RP) and a new hydraulic borehole mining system (HBM). Before environmental assessment can begin, each technology is defined in terms of its engineering characteristics at both the conceptual and preliminary design stages. The mining sites are also described in order to identify the significant advantages and constraints for each system. This can be a basic physical and biological survey of the region at the conceptual stage, but a more specific representation of site characteristics is required at the preliminary stage. Assessment of potential environmental effects of each system at the conceptual design is critical to its hardware development and application. A checklist can be used to compare and identify the negative impacts of each method, outlining the resource affected, the type of impact involved, and the exact activity causing that impact. At the preliminary design stage, these impacts should be evaluated as a result of either utilization or alteration. Underground coal mining systems have three major utilization impacts - the total area disturbed, the total water resources withdrawn from other uses, and the overall energy efficiency of the process - and one major alteration impact - the degradation of water quality by sedimentation and acid contamination. A comparison of the RP and HBM systems shows the HBM to be an environmentally less desirable system for the Central Appalachia region.

  18. Environmental Impact Assessment and Space Activities

    Science.gov (United States)

    Viikari, L.

    Environmental Impact Assessment (EIA) is a common tool for environment a l protection and management on Earth today, as prior assessment of the environmental consequences of planned activities. It is meant to provide the decision-makers with as comprehensive as possible information about the different environmental effects the proposed activity would entail, including alternative courses of action and the zero-alternative (i.e. the no action alternative). Additionally, plans for mitigation in respect of each alternative are to be outlined. The assessments take account of i.a. environmental impacts on ecosystems, diminution of aesthetic and scientific values, long-term or cumulative effects, as well as transfrontier implications. They also consider issues such as pollution control, environmental protection measures, reporting, post-project analysis, rehabilitation and so on. Also uncertainties in the assessment process are to be expressly presented. Most importantly, a common requirement also is that the results of the impact studies are presented in a way comprehensible to the g neral public,e too. Although the central aspect of the EIA is to provide the decision-makers with scientific information, the process also has other important implications. One of the most relevant of them is the involvement of those people potentially affected in some way by the proposed activity: most EIA systems require in some way the participation of the public, alongside with the relevant governmental authorities and other stake-holders. Such public involvement has various aims and goals: it may serve as a testimony to good governance in general, or be considered in more practical terms as improved planning, due to the concrete contribution of the public to the decision-making process. Obviously, it also is a tool for reducing conflict and developing wider support for the eventual decisions. In short, it enables the public to gain information about planned activities and influence

  19. Environmental radiology assessment in Lahad Datu, Sabah

    Science.gov (United States)

    Siti Fharhana, Yusof; Wan Muhamad Saridan, Wan Hassan; Ahmad Termizi, Ramli; Mohd Hilmi, Sahini; Mohammad Syazwan, Mohd Sanusi; Nor Afifah, Basri; Nor Zati Hani, Abu Hanifah

    2017-10-01

    Monitoring terrestial gamma radiation is crucial to prepare a baseline data for environmental radiological protection. Radiological research was carried out in Lahad Datu, Sabah to obtain the radioactivity status and terrestrial gamma radiation level in the area. We measure the terrestrial gamma radiation dose rates and analyse the radioactivity concentration of primordial radionuclides for radiological risk assessment. We identified that the annual estimation of dose effective for public is below the public dose limit, 1 mSv per year. Public and environment safety and health are remain secure. The obtained data and results can be used as reference for environmental radiology protection.

  20. Development and implementation of a GIS-based tool for spatial modeling of seismic vulnerability of Tehran

    Directory of Open Access Journals (Sweden)

    M. Hashemi

    2012-12-01

    Full Text Available Achieving sustainable development in countries prone to earthquakes is possible with taking effective measures to reduce vulnerability to earthquakes. In this context, damage assessment of hypothetical earthquakes and planning for disaster management are important issues. Having a computer tool capable of estimating structural and human losses from earthquakes in a specific region may facilitate the decision-making process before and during disasters. Interoperability of this tool with wide-spread spatial analysis frameworks will expedite the data transferring process. In this study, the earthquake damage assessment (EDA software tool is developed as an embedded extension within a GIS (geographic information system environment for the city of Tehran, Iran. This GIS-based extension provides users with a familiar environment to estimate and observe the probable damages and fatalities of a deterministic earthquake scenario. The productivity of this tool is later demonstrated for southern Karoon parish, Region 10, Tehran. Three case studies for three active faults in the area and a comparison of the results with other research substantiated the reliability of this tool for additional earthquake scenarios.

  1. Klickitat Cogeneration Project: Final environmental assessment

    International Nuclear Information System (INIS)

    1994-09-01

    To meet BPA's contractual obligation to supply electrical power to its customers, BPA proposes to acquire power generated by Klickitat Cogeneration Project. BPA has prepared an environmental assessment evaluating the proposed project. Based on the EA analysis, BPA's proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 for the following reasons: (1)it will not have a significant impact land use, upland vegetation, wetlands, water quality, geology, soils, public health and safety, visual quality, historical and cultural resources, recreation and socioeconomics, and (2) impacts to fisheries, wildlife resources, air quality, and noise will be temporary, minor, or sufficiently offset by mitigation. Therefore, the preparation of an environmental impact statement is not required and BPA is issuing this FONSI (Finding of No Significant Impact)

  2. Boise geothermal injection well: Final environmental assessment

    International Nuclear Information System (INIS)

    1997-01-01

    The City of Boise, Idaho, an Idaho Municipal Corporation, is proposing to construct a well with which to inject spent geothermal water from its hot water heating system back into the geothermal aquifer. Because of a cooperative agreement between the City and the US Department of Energy to design and construct the proposed well, compliance to the National Environmental Policy Act (NEPA) is required. Therefore, this Environmental Assessment (EA) represents the analysis of the proposed project required under NEPA. The intent of this EA is to: (1) briefly describe historical uses of the Boise Geothermal Aquifer; (2) discuss the underlying reason for the proposed action; (3) describe alternatives considered, including the No Action Alternative and the Preferred Alternative; and (4) present potential environmental impacts of the proposed action and the analysis of those impacts as they apply to the respective alternatives

  3. Klickitat Cogeneration Project : Final Environmental Assessment.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration; Klickitat Energy Partners

    1994-09-01

    To meet BPA`s contractual obligation to supply electrical power to its customers, BPA proposes to acquire power generated by Klickitat Cogeneration Project. BPA has prepared an environmental assessment evaluating the proposed project. Based on the EA analysis, BPA`s proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 for the following reasons: (1)it will not have a significant impact land use, upland vegetation, wetlands, water quality, geology, soils, public health and safety, visual quality, historical and cultural resources, recreation and socioeconomics, and (2) impacts to fisheries, wildlife resources, air quality, and noise will be temporary, minor, or sufficiently offset by mitigation. Therefore, the preparation of an environmental impact statement is not required and BPA is issuing this FONSI (Finding of No Significant Impact).

  4. Bonneville - Hood River Vegetation Management Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    N/A

    1998-08-01

    To maintain the reliability of its electrical system, BPA, in cooperation with the U.S. Forest Service, needs to expand the range of vegetation management options used to clear unwanted vegetation on about 20 miles of BPA transmission line right-of-way between Bonneville Dam and Hood River; Oregon, within the Columbia Gorge National Scenic Area (NSA). We propose to continue controlling undesirable vegetation using a program of Integrated Vegetation Management (IVM) which includes manual, biological and chemical treatment methods. BPA has prepared an Environmental Assessment (EA) (DOE/EA-1257) evaluating the proposed project. Based on the analysis in the EA, BPA has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement (EIS) is not required and BPA is issuing this FONSI.

  5. Boise geothermal injection well: Final environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The City of Boise, Idaho, an Idaho Municipal Corporation, is proposing to construct a well with which to inject spent geothermal water from its hot water heating system back into the geothermal aquifer. Because of a cooperative agreement between the City and the US Department of Energy to design and construct the proposed well, compliance to the National Environmental Policy Act (NEPA) is required. Therefore, this Environmental Assessment (EA) represents the analysis of the proposed project required under NEPA. The intent of this EA is to: (1) briefly describe historical uses of the Boise Geothermal Aquifer; (2) discuss the underlying reason for the proposed action; (3) describe alternatives considered, including the No Action Alternative and the Preferred Alternative; and (4) present potential environmental impacts of the proposed action and the analysis of those impacts as they apply to the respective alternatives.

  6. GIS-based rare events logistic regression for mineral prospectivity mapping

    Science.gov (United States)

    Xiong, Yihui; Zuo, Renguang

    2018-02-01

    Mineralization is a special type of singularity event, and can be considered as a rare event, because within a specific study area the number of prospective locations (1s) are considerably fewer than the number of non-prospective locations (0s). In this study, GIS-based rare events logistic regression (RELR) was used to map the mineral prospectivity in the southwestern Fujian Province, China. An odds ratio was used to measure the relative importance of the evidence variables with respect to mineralization. The results suggest that formations, granites, and skarn alterations, followed by faults and aeromagnetic anomaly are the most important indicators for the formation of Fe-related mineralization in the study area. The prediction rate and the area under the curve (AUC) values show that areas with higher probability have a strong spatial relationship with the known mineral deposits. Comparing the results with original logistic regression (OLR) demonstrates that the GIS-based RELR performs better than OLR. The prospectivity map obtained in this study benefits the search for skarn Fe-related mineralization in the study area.

  7. Landslide susceptibility mapping using GIS-based statistical models and Remote sensing data in tropical environment.

    Science.gov (United States)

    Shahabi, Himan; Hashim, Mazlan

    2015-04-22

    This research presents the results of the GIS-based statistical models for generation of landslide susceptibility mapping using geographic information system (GIS) and remote-sensing data for Cameron Highlands area in Malaysia. Ten factors including slope, aspect, soil, lithology, NDVI, land cover, distance to drainage, precipitation, distance to fault, and distance to road were extracted from SAR data, SPOT 5 and WorldView-1 images. The relationships between the detected landslide locations and these ten related factors were identified by using GIS-based statistical models including analytical hierarchy process (AHP), weighted linear combination (WLC) and spatial multi-criteria evaluation (SMCE) models. The landslide inventory map which has a total of 92 landslide locations was created based on numerous resources such as digital aerial photographs, AIRSAR data, WorldView-1 images, and field surveys. Then, 80% of the landslide inventory was used for training the statistical models and the remaining 20% was used for validation purpose. The validation results using the Relative landslide density index (R-index) and Receiver operating characteristic (ROC) demonstrated that the SMCE model (accuracy is 96%) is better in prediction than AHP (accuracy is 91%) and WLC (accuracy is 89%) models. These landslide susceptibility maps would be useful for hazard mitigation purpose and regional planning.

  8. An Assessment of Environmental Impacts Assessment (EIA in Malaysia

    Directory of Open Access Journals (Sweden)

    Abdul Hamid Masdiah

    2017-01-01

    Full Text Available The effectiveness of Environmental Impact Assessment (EIA in evaluating the planning project is a debatable issue among academics and practitioners, since EIA has been claimed to be unable to eliminate the environmental issues. Focusing only on technical improvements is not sufficient for rectifying the problems of EIA; the process of EIA should be clearly identified instead to maximise the effective use of EIA. It is important to note that the effective use of EIA, particularly on process-related issues could significantly minimise bad environmental effects. In summary, this study aims to explore and identify the effectiveness of EIA in the planning process and barriers to evaluate the environmental performance in Malaysia. The findings of this study could be a baseline for organisation to minimize emission, avoid the risk of prosecution and fines arising from potential environment breaches and cost reduction within the organisation.

  9. Strategic environmental assessment for energy production

    International Nuclear Information System (INIS)

    Jay, Stephen

    2010-01-01

    Amongst the approaches that have developed to improve environmental protection within the energy sector, strategic environmental assessment (SEA) has received relatively little attention. This is despite its potential to overcome some of the shortcomings associated with project-level assessment by intervening at higher levels of energy system planning. In this article, a review is presented of the extent to which SEA has been adopted and otherwise promoted in strategic energy planning processes in a wide range of countries throughout the world (with an emphasis on European Union nations). In this regard, the growing importance of regulatory compliance is underlined, especially within the EU, with a particular focus upon the application of SEA to grid systems. The case of the Belgian transmission system is described, illustrating a proactive approach to SEA. But the difficulties inherent in introducing SEA to an increasingly fragmented and liberalised sector are also drawn out, leading to suggestions by which these difficulties may be addressed.

  10. Environmental assessment, Richton Dome site, Mississippi (US)

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    The Nuclear Waste Policy Act of 1982 (42 USC Sections 10101-10226) requires the environmental assessment of a potential site to include a statement of the basis for the nomination of a site as suitable for characterization. Volume 2 of this environmental assessment provides a detailed evaluation of the Richton Dome Site and its suitability as the site for a radioactive waste disposal facility under DOE siting guidelines, as well as a comparison of the Richton Dome site with other proposed sites. Evaluation of the Richton Dome site is based on the reference repository design, but the evaluation will not change if based on the Mission Plan repository concept. The comparative evaluation of proposed sites is required under DOE guidelines, but is not intended to directly support the subsequent recommendation of three sites for characterization as candidate sites. 428 refs., 24 figs., 62 tabs. (MHB)

  11. Environmental assessment, Richton Dome site, Mississippi

    International Nuclear Information System (INIS)

    1986-05-01

    The Nuclear Waste Policy Act of 1982 (42 USC Sections 10101-10226) requires the environmental assessment of a potential site to include a statement of the basis for the nomination of a site as suitable for characterization. Volume 2 of this environmental assessment provides a detailed evaluation of the Richton Dome Site and its suitability as the site for a radioactive waste disposal facility under DOE siting guidelines, as well as a comparison of the Richton Dome site with other proposed sites. Evaluation of the Richton Dome site is based on the reference repository design, but the evaluation will not change if based on the Mission Plan repository concept. The comparative evaluation of proposed sites is required under DOE guidelines, but is not intended to directly support the subsequent recommendation of three sites for characterization as candidate sites. 428 refs., 24 figs., 62 tabs

  12. A GIS-based susceptibility map for landslides at the Franconian Alb, Germany

    Science.gov (United States)

    Jaeger, Daniel; Wilde, Martina; Lorenz, Michael; Terhorst, Birgit; Neuhäuser, Bettina; Damm, Bodo; Bemm, Stefan

    2014-05-01

    In general, slopes of cuesta scarps like the Franconian Alb are highly prone to slide activity due to susceptible geological and geomorphological conditions. The geological setting with alternating permeable and non-permeable bedrock results in the characteristic cuesta landforms of almost flat backslopes and steeper front slopes. Furthermore, this bipartite structure leads to a strong disposition for mass movements. The slopes of the study area near the town of Ebermannstadt are affected by different types of mass movements, such as topples, slides, lateral spreads and flows, either in single or in combined occurrence. In the years 1625, 1957, 1961 and 1979, four large landslides took place in the area of Ebermannstadt, reaching close to the town limits and causing major destructions to traffic facilities. In the study area, slopes are covered by debris and slide masses, thus they are prone to remobilization and further mass movements. In order to assess hazardous areas, a GIS-based susceptibility modelling was generated for the study area. The susceptibtibility modeling was processed with the slope stability model SINMAP (Stability Index Mapping), developed by TARBOTON (1997) and PACK et al. (1999). As SINMAP was particularly designed to model shallow translational slides, it should be well designed for describing the conditions of the study area in a sufficient way. SINMAP is based on the "infinite slope stability model" by HAMMONT et al. (1992) and MONTGOMERY & DIETRICH (1994), which focuses on the relation of stabilizing (cohesiveness, friction angle) and destabilizing (gravitation) factors on a plain surface. By adding a slope gradient, as well as soil mechanical and climatical data, indices of slope stabilities are calculated. For a more detailed modeling of the slope conditions, SINMAP computes different "calibration regions", which merge similar parameters of soil, land-use, vegetation, and geology. Due to the fact that vegetation, land-use, and soils only

  13. Environmental impacts of renewable energy. Geographic Information Systems (GIS) based analysis of cumulative effects

    International Nuclear Information System (INIS)

    Rhoden, Henning

    2015-01-01

    The energy transition and thus turning away from fossil fuels and nuclear energy sources is based on an increased expansion of renewable energies. This expansion mainly take place in nature and the landscape, which conflicts with the objectives of the Federal Nature Conservation Act concerning scenery or the consequences of monoculture cultivation of energy crops. What happens, however, if more than one type of renewables occur compressed in a landscape that is investigated in this work. Result from cumulative effects are extended conflict with the objectives of the Federal Nature Conservation Act or possibly have positive effects can be seen? A ''cumulative effect'' is defined as an additive-synergistic overall effect of all a protected interest of respective impact factors. These arise from one or more projects / plans and influence from a variety of ways. As part of the investigations carried out it is clear that extended conflicts may arise in relation to the objectives of the Federal Nature Conservation Act by cumulative effects of renewable energies. To prevent these conflicts, policies and regulations in the context of spatial planning is necessary to enable a focusing of spatial planning for a sustainable expansion of renewable energy. [de

  14. Exploring Spatiotemporal Trends in Commercial Fishing Effort of an Abalone Fishing Zone: A GIS-Based Hotspot Model.

    Directory of Open Access Journals (Sweden)

    M Ali Jalali

    Full Text Available Assessing patterns of fisheries activity at a scale related to resource exploitation has received particular attention in recent times. However, acquiring data about the distribution and spatiotemporal allocation of catch and fishing effort in small scale benthic fisheries remains challenging. Here, we used GIS-based spatio-statistical models to investigate the footprint of commercial diving events on blacklip abalone (Haliotis rubra stocks along the south-west coast of Victoria, Australia from 2008 to 2011. Using abalone catch data matched with GPS location we found catch per unit of fishing effort (CPUE was not uniformly spatially and temporally distributed across the study area. Spatial autocorrelation and hotspot analysis revealed significant spatiotemporal clusters of CPUE (with distance thresholds of 100's of meters among years, indicating the presence of CPUE hotspots focused on specific reefs. Cumulative hotspot maps indicated that certain reef complexes were consistently targeted across years but with varying intensity, however often a relatively small proportion of the full reef extent was targeted. Integrating CPUE with remotely-sensed light detection and ranging (LiDAR derived bathymetry data using generalized additive mixed model corroborated that fishing pressure primarily coincided with shallow, rugose and complex components of reef structures. This study demonstrates that a geospatial approach is efficient in detecting patterns and trends in commercial fishing effort and its association with seafloor characteristics.

  15. A GIS-based methodology for drought vulnerability modelling: application at the region of el Hodna, central Algeria

    Directory of Open Access Journals (Sweden)

    Meriem Boultif

    2017-06-01

    Full Text Available Boultif, M. and Benmessaoud, H. 2017. A GIS-based methodology for drought vulnerability modelling: application at the region of el Hodna, central Algeria. Lebanese Science Journal, 18(1: 53-72. Desert covers 80% of the Algerian territory, while the remaining area is covered by Mediterranean forests and arid climate steppe that are characterized by severe vulnerability to different stresses such as drought, especially with the increase of nefarious human impact and the overuse of natural resources. The objective of this study is to analyse and assess drought vulnerability in the area of El Hodna in central Algeria. The methodology was based on the use of GIS tools and multi-criteria analysis (Analytical hierarchy process to develop a model of vulnerability mapping. The results showed that 35.67% of the study area was very vulnerable, 32.77% in fragile situation, 19.72% are potentially vulnerable, and only 11.83% of the surface is not affected. The drought-vulnerability map provides a basis from which it will be possible to prevent and prepare for a drought response.

  16. A GIS based spatially-explicit sensitivity and uncertainty analysis approach for multi-criteria decision analysis☆

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Jankowski, Piotr; Blaschke, Thomas

    2014-01-01

    GIS multicriteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for the prediction of future hazards, land use planning, as well as for hazard preparedness. However, the uncertainties associated with MCDA techniques are inevitable and model outcomes are open to multiple types of uncertainty. In this paper, we present a systematic approach to uncertainty and sensitivity analysis. We access the uncertainty of landslide susceptibility maps produced with GIS-MCDA techniques. A new spatially-explicit approach and Dempster–Shafer Theory (DST) are employed to assess the uncertainties associated with two MCDA techniques, namely Analytical Hierarchical Process (AHP) and Ordered Weighted Averaging (OWA) implemented in GIS. The methodology is composed of three different phases. First, weights are computed to express the relative importance of factors (criteria) for landslide susceptibility. Next, the uncertainty and sensitivity of landslide susceptibility is analyzed as a function of weights using Monte Carlo Simulation and Global Sensitivity Analysis. Finally, the results are validated using a landslide inventory database and by applying DST. The comparisons of the obtained landslide susceptibility maps of both MCDA techniques with known landslides show that the AHP outperforms OWA. However, the OWA-generated landslide susceptibility map shows lower uncertainty than the AHP-generated map. The results demonstrate that further improvement in the accuracy of GIS-based MCDA can be achieved by employing an integrated uncertainty–sensitivity analysis approach, in which the uncertainty of landslide susceptibility model is decomposed and attributed to model's criteria weights. PMID:25843987

  17. A GIS based spatially-explicit sensitivity and uncertainty analysis approach for multi-criteria decision analysis.

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Jankowski, Piotr; Blaschke, Thomas

    2014-03-01

    GIS multicriteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for the prediction of future hazards, land use planning, as well as for hazard preparedness. However, the uncertainties associated with MCDA techniques are inevitable and model outcomes are open to multiple types of uncertainty. In this paper, we present a systematic approach to uncertainty and sensitivity analysis. We access the uncertainty of landslide susceptibility maps produced with GIS-MCDA techniques. A new spatially-explicit approach and Dempster-Shafer Theory (DST) are employed to assess the uncertainties associated with two MCDA techniques, namely Analytical Hierarchical Process (AHP) and Ordered Weighted Averaging (OWA) implemented in GIS. The methodology is composed of three different phases. First, weights are computed to express the relative importance of factors (criteria) for landslide susceptibility. Next, the uncertainty and sensitivity of landslide susceptibility is analyzed as a function of weights using Monte Carlo Simulation and Global Sensitivity Analysis. Finally, the results are validated using a landslide inventory database and by applying DST. The comparisons of the obtained landslide susceptibility maps of both MCDA techniques with known landslides show that the AHP outperforms OWA. However, the OWA-generated landslide susceptibility map shows lower uncertainty than the AHP-generated map. The results demonstrate that further improvement in the accuracy of GIS-based MCDA can be achieved by employing an integrated uncertainty-sensitivity analysis approach, in which the uncertainty of landslide susceptibility model is decomposed and attributed to model's criteria weights.

  18. Impact of land-use on groundwater quality: GIS-based study from an alluvial aquifer in the western Ganges basin

    Science.gov (United States)

    Khan, Arina; Khan, Haris Hasan; Umar, Rashid

    2017-12-01

    In this study, groundwater quality of an alluvial aquifer in the western Ganges basin is assessed using a GIS-based groundwater quality index (GQI) concept that uses groundwater quality data from field survey and laboratory analysis. Groundwater samples were collected from 42 wells during pre-monsoon and post-monsoon periods of 2012 and analysed for pH, EC, TDS, Anions (Cl, SO4, NO3), and Cations (Ca, Mg, Na). To generate the index, several parameters were selected based on WHO recommendations. The spatially variable grids of each parameter were modified by normalizing with the WHO standards and finally integrated into a GQI grid. The mean GQI values for both the season suggest good groundwater quality. However, spatial variations exist and are represented by GQI map of both seasons. This spatial variability was compared with the existing land-use, prepared using high-resolution satellite imagery available in Google earth. The GQI grids were compared to the land-use map using an innovative GIS-based method. Results indicate that the spatial variability of groundwater quality in the region is not fully controlled by the land-use pattern. This probably reflects the diffuse nature of land-use classes, especially settlements and plantations.

  19. GIS-BASED EXPERIENCE OF INVESTIGATING THE STATUS OF SPAWNING AREAS WITHIN THE UPPER SECTION OF THE TSIMLYANSK RESERVOIR

    Directory of Open Access Journals (Sweden)

    N. S. Kalioujnaia

    2017-01-01

    Full Text Available This paper presents a GIS-based research approach to investigating the status and dynamics of spawning areas of the Tsimlyansk Reservoir (within Volgograd Region, one of the largest inland fishery water bodies in the South of Russia.The spawning areas were considered in terms of the concept of ecotone origin, of the highly dynamic aquatic-terrestrial transitional environment in which temporary flooding is the main factor determining the diversity of spawning habitats, recruitment conditions, as well as ecosystem productivity.The processing and interpretation of Landsat images for the spring and low-water seasons for years between 2005 and 2016, in combination with other data (large-scale topographic maps, fishery research, and scientific papers allowed revealing the location of main spawning areas within the reservoir’s Upper section and to calculate their areas.For three case study sites located on the left bank of the reservoir, the main natural and anthropogenic factors determining the spawning conditions were identified. Retrospective analysis and synthesis of data on young fish composition and abundance between 1980 and today confirmed the importance of these sites for fish recruitment as well as the opportunities for their improvement by means of restoration measures.The output maps present the spatial distribution of the spawning areas and the environmental factors directly or indirectly affecting fish recruitment conditions. The most impacted areas have been determined, including the areas affected by abrasion, siltation and eutrophication processes, as well as pollution of the aquatic zone and water protection zone of the reservoir.The results of the research are useful both for understanding the general environmental conditions of the Tsimlyansk Reservoir and for supporting management decisions towards its improvement. 

  20. Environmental Risk Assessment Strategy for Nanomaterials

    Directory of Open Access Journals (Sweden)

    Janeck J. Scott‐Fordsmand

    2017-10-01

    Full Text Available An Environmental Risk Assessment (ERA for nanomaterials (NMs is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i materials, (ii release, fate and exposure, (iii hazard and (iv risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES and relevant exposure scenarios (RES and, subsequently, the possible release routes, both with regard to which compartment(s NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC, but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC, either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

  1. Environmental assessment: South microwave communication facilities

    Energy Technology Data Exchange (ETDEWEB)

    1989-06-01

    Western Area Power Administration (Western) is proposing to construct, operate, and maintain eight microwave repeater stations in southwestern Colorado, southeastern Utah, and northern Arizona, in order to meet the minimum fade criteria established by the Western Systems Coordinating Council (WSCC) for the operation and protection of electric power systems. The proposed microwave facilities would increase the reliability of communication. This environmental assessment (EA) describes the existing environmental conditions and the impacts from construction of the eight microwave communication facilities. The EA was prepared in compliance with the National Environmental Policy Act of 1969, the Council on Environmental Quality Regulations (40 CFR 1500-1508), and the Department of Energy Guidelines (52 FR 47662, December 15, 1987). The proposed project would consist of constructing eight microwave facilities, each of which would include a self-supported lattice tower, an equipment building, a propane tank, distribution lines to provide electric power to the sites, and access roads to the sites. The facilities would be constructed in San Miguel and Montezuma Counties in Colorado, San Juan County, Utah, and Navajo, Apache, Coconino, and Yavapai Counties in Arizona. 20 refs., 2 figs., 2 tabs.

  2. Environmental assessment in health care organizations.

    Science.gov (United States)

    Romero, Isabel; Carnero, María Carmen

    2017-12-22

    The aim of this research is to design a multi-criteria model for environmental assessment of health care organizations. This is a model which guarantees the objectivity of the results obtained, is easy to apply, and incorporates a series of criteria, and their corresponding descriptors, relevant to the internal environmental auditing processes of the hospital. Furthermore, judgments were given by three experts from the areas of health, the environment, and multi-criteria decision techniques. From the values assigned, geometric means were calculated, giving weightings for the criteria of the model. This innovative model is intended for application within a continuous improvement process. A practical case from a Spanish hospital is included at the end. Information contained in the sustainability report provided the data needed to apply the model. The example contains all the criteria previously defined in the model. The results obtained show that the best-satisfied criteria are those related to energy consumption, generation of hazardous waste, legal matters, environmental sensitivity of staff, patients and others, and the environmental management of suppliers. On the other hand, those areas returning poor results are control of atmospheric emissions, increase in consumption of renewable energies, and the logistics of waste produced. It is recommended that steps be taken to correct these deficiencies, thus leading to an acceptable increase in the sustainability of the hospital.

  3. Regional analysis and environmental impact assessment

    International Nuclear Information System (INIS)

    Parzyck, D.C.; Brocksen, R.W.; Emanuel, W.R.

    1976-01-01

    This paper presents a number of techniques that can be used to assess environmental impacts on a regional scale. Regional methodologies have been developed which examine impacts upon aquatic and terrestrial biota in regions through consideration of changes in land use, land cover, air quality, water resource use, and water quality. Techniques used to assess long-range atmospheric transport, water resources, effects on sensitive forest and animal species, and impacts on man are presented in this paper, along with an optimization approach which serves to integrate the analytical techniques in an overall assessment framework. A brief review of the research approach and certain modeling techniques used within one regional studies program is provided. While it is not an all inclusive report on regional analyses, it does present an illustration of the types of analyses that can be performed on a regional scale

  4. Underwater noise modelling for environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Farcas, Adrian [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom); Thompson, Paul M. [Lighthouse Field Station, Institute of Biological and Environmental Sciences, University of Aberdeen, Cromarty IV11 8YL (United Kingdom); Merchant, Nathan D., E-mail: nathan.merchant@cefas.co.uk [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom)

    2016-02-15

    Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

  5. Environmental exposure assessment in European birth cohorts

    DEFF Research Database (Denmark)

    Gehring, Ulrike; Casas, Maribel; Brunekreef, Bert

    2013-01-01

    exposure assessment. Collaborative analyses with data from several birth cohorts have already been performed successfully for outdoor air pollution, water contamination, allergens, biological contaminants, molds, POPs and SHS. Key success factors for collaborative analyses are common definitions of main...... of the environmental exposure and health data in these studies was made as part of the ENRIECO (Environmental Health Risks in European Birth Cohorts) project. The focus with regard to exposure was on outdoor air pollution, water contamination, allergens and biological organisms, metals, pesticides, smoking and second...... exposure and health variables. Our review emphasizes that such common definitions need ideally be arrived at in the study design phase. However, careful comparison of methods used in existing studies also offers excellent opportunities for collaborative analyses. Investigators can use this review...

  6. Environmental assessment of batteries for photovoltaic systems

    International Nuclear Information System (INIS)

    Brouwer, J.M.; Lindeijer, E.W.

    1993-10-01

    A life cycle analysis (LCA) on 4 types of batteries for PV systems has been performed. in order to assess the environmental impacts of the various battery types, leading to recommendations for improvements in the production and use of batteries. The different battery types are compared on the basis of a functional unit: 240 kWh electric energy from PV modules delivered for household applications by one flat-plate lead-acid battery. An important product characteristic is the performance; in the study a Ni-Cd battery is taken to deliver 4 times as much energy as a flat plate battery (Pb-flat), a rod plate battery (Pb-rod) 3.4 times as much and a tubular plate battery (Pb-tube) 2.8 times as much. Environmental data was gathered from recent primary and secondary data in a database under internal quality control. Calculations were performed with an updated version of SIMAKOZA, a programme developed by the Centre of Environmental Science (CML), University of Leiden, Leiden, Netherlands. Of the types investigated, the Pb tube battery is to be preferred environmentally. Using one allocation method for recycling, the NiCd battery scores best on ozone depletion since no PVC is used (PVC production demands cooling with CFCs), on non-toxic waste and on disruption of ecosystems. The lead-bearing batteries score better on other aspects due to lower energy consumption during production and no emissions of cadmium. Using another allocation method for recycling the NiCd battery scores best on almost all environmental topics. Both allocation methods supplement each other. For resource depletion, regarding cadmium as an unavoidable by-product of zinc production renders NiCd batteries as much less problematic than lead/acid batteries, but taking account of the physical resources available would make the use of cadmium much more problematic than the use of lead. 37 figs., 20 tabs., 8 appendices, 109 refs

  7. On - Site Assessment Methods For Environmental Radioactivity

    International Nuclear Information System (INIS)

    Petrinec, B.; Babic, D.; Bituh, T.

    2015-01-01

    A method for the rapid determination of radioactivity in cases of release into the environment as well as in cases of nuclear/radiological accidents is described. These measurements would enable a direct risk assessment for humans and biota, without any sampling and at a considerably larger number of locations than in previous studies. Thus obtained, the substantially expanded dataset is expected to shed more light on the properties of environmental radioactivity both in the region studied and in other similar areas. Field measurements will be performed and samples of soil and biota will be collected in order to compare field results with laboratory measurements. Once the method has been validated, previously unexplored locations will be included in the study. Our measurements at numerous locations will also provide control values for comparison in cases of any unplanned or accidental radiological event. An assessment of the possible effects of radionuclide concentrations on the human food chain and biota will be performed within the appropriate models used worldwide exactly for this purpose. In this way, the project should contribute to regional, European, and global efforts towards understanding the radiological impact on ecosystems. Field measurements will also address certain issues in the environmental metrology of radioactive substances, e.g., simultaneous determination of activity concentrations and related dose rates. This will serve as a tool for rapid risk assessment in emergency situations. (author).

  8. Gis Based Analysis For Suitability Location Finding In The Residential Development Areas Of Greater Matara Region

    Directory of Open Access Journals (Sweden)

    H.K.G.M Madurika

    2017-02-01

    Full Text Available Urban Planning and Land utilization for the Residential is one of crucial factors in high density Cities. Many theories in Planning explain the Residential areas are moving to periphery areas in cities by its commercial development. Martara is one of developing city in Southern Sri Lanka and Residential land value are comparative high in city sub urban areas. In this study it is examined that where is the best locations for residential development in Grater Matara Region by using five criteria. GIS based Multi Criteria Method MCE method have been applied to find the suitable locations. The results of analysis have been shown that there are 5378.99 hectares area suitable within study area and however extremely importance areas only 1.40 hectares accordingly given criteria but very strongly importance and importance category have 1560.51 and 2468.22 respectively.

  9. Using the fuzzy majority approach for GIS-based multicriteria group decision-making

    Science.gov (United States)

    Boroushaki, Soheil; Malczewski, Jacek

    2010-03-01

    This paper is concerned with developing a framework for GIS-based multicriteria group decision-making using the fuzzy majority approach. The procedure for solving a spatial group decision-making problem involves two stages. First, each decision-maker solves the problem individually. Second, the individual solutions are aggregated to obtain a group solution. The first stage is operationalized by a linguistic quantifier-guided ordered weighted averaging (OWA) procedure to create individual decision-maker's solution maps. Then the individual maps are combined using the fuzzy majority procedure to generate the group solution map which synthesizes the majority of the decision-makers' preferences. The paper provides an illustrative example of the fuzzy majority method for a land suitability problem. It also demonstrates the implementation of the framework within the ArcGIS environment.

  10. Strategic Environmental Assessment & The Danish Energy Sector

    DEFF Research Database (Denmark)

    Lyhne, Ivar

    "Strategic Environmental Assessment and the Danish Energy Sector" is a doctoral thesis based on a Ph.D. project with the same title. The overall aim of the project has been to assist actors in the energy sector in developing a meaningful way of applying SEA at strategic level. Understanding of how...... strategic decisions are made is a prerequisite for achieving this target, and the thesis therefore explores the strategic decision-making processes of contemporary energy infrastructure developments. The highlights of this thesis are: - A combination of disciplines in a continuum of perspectives...

  11. Biomass Gasifier Facility (BGF). Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The Pacific International Center for High Technology Research (PICHTR) is planning, to design, construct and operate a Biomass Gasifier Facility (BGF). This facility will be located on a site easement near the Hawaiian Commercial & Sugar company (KC&S) Paia Sugar Factory on Maui, Hawaii. The proposed BGF Project is a scale-up facility, intended to demonstrate the technical and economic feasibility of emerging biomass gasification technology for commercialization. This Executive Summary summarizes the uses of this Environmental Assessment, the purpose and need for the project, project,description, and project alternatives.

  12. GIS-Based Planning and Modeling for Renewable Energy: Challenges and Future Research Avenues

    Directory of Open Access Journals (Sweden)

    Bernd Resch

    2014-05-01

    Full Text Available In the face of the broad political call for an “energy turnaround”, we are currently witnessing three essential trends with regard to energy infrastructure planning, energy generation and storage: from planned production towards fluctuating production on the basis of renewable energy sources, from centralized generation towards decentralized generation and from expensive energy carriers towards cost-free energy carriers. These changes necessitate considerable modifications of the energy infrastructure. Even though most of these modifications are inherently motivated by geospatial questions and challenges, the integration of energy system models and Geographic Information Systems (GIS is still in its infancy. This paper analyzes the shortcomings of previous approaches in using GIS in renewable energy-related projects, extracts distinct challenges from these previous efforts and, finally, defines a set of core future research avenues for GIS-based energy infrastructure planning with a focus on the use of renewable energy. These future research avenues comprise the availability base data and their “geospatial awareness”, the development of a generic and unified data model, the usage of volunteered geographic information (VGI and crowdsourced data in analysis processes, the integration of 3D building models and 3D data analysis, the incorporation of network topologies into GIS, the harmonization of the heterogeneous views on aggregation issues in the fields of energy and GIS, fine-grained energy demand estimation from freely-available data sources, decentralized storage facility planning, the investigation of GIS-based public participation mechanisms, the transition from purely structural to operational planning, data privacy aspects and, finally, the development of a new dynamic power market design.

  13. GIS-based interactive tool to map the advent of world conquerors

    Science.gov (United States)

    Lakkaraju, Mahesh

    The objective of this thesis is to show the scale and extent of some of the greatest empires the world has ever seen. This is a hybrid project between the GIS based interactive tool and the web-based JavaScript tool. This approach lets the students learn effectively about the emperors themselves while understanding how long and far their empires spread. In the GIS based tool, a map is displayed with various points on it, and when a user clicks on one point, the relevant information of what happened at that particular place is displayed. Apart from this information, users can also select the interactive animation button and can walk through a set of battles in chronological order. As mentioned, this uses Java as the main programming language, and MOJO (Map Objects Java Objects) provided by ESRI. MOJO is very effective as its GIS related features can be included in the application itself. This app. is a simple tool and has been developed for university or high school level students. D3.js is an interactive animation and visualization platform built on the Javascript framework. Though HTML5, CSS3, Javascript and SVG animations can be used to derive custom animations, this tool can help bring out results with less effort and more ease of use. Hence, it has become the most sought after visualization tool for multiple applications. D3.js has provided a map-based visualization feature so that we can easily display text-based data in a map-based interface. To draw the map and the points on it, D3.js uses data rendered in TOPO JSON format. The latitudes and longitudes can be provided, which are interpolated into the Map svg. One of the main advantages of doing it this way is that more information is retained when we use a visual medium.

  14. Managing Air Quality - Human Health, Environmental and Economic Assessments

    Science.gov (United States)

    Human health and environmental assessments characterize health and environmental risks associated with exposure to pollution. Economic assessments evaluate the cost and economic impact of a policy or regulation & can estimate economic benefits.

  15. A GIS based screening tool for locating and ranking of suitable stormwater harvesting sites in urban areas.

    Science.gov (United States)

    Inamdar, P M; Cook, S; Sharma, A K; Corby, N; O'Connor, J; Perera, B J C

    2013-10-15

    There is the need to re-configure current urban water systems to achieve the objective of sustainable water sensitive cities. Stormwater represents a valuable alternative urban water source to reduce pressure on fresh water resources, and to mitigate the environmental impact of urban stormwater runoff. The selection of suitable urban stormwater harvesting sites is generally based on the judgement of water planners, who are faced with the challenge of considering multiple technical and socio-economic factors that influence the site suitability. To address this challenge, the present study developed a robust GIS based screening methodology for identifying potentially suitable stormwater harvesting sites in urban areas as a first pass for then more detailed investigation. The study initially evaluated suitability based on the match between harvestable runoff and demand through a concept of accumulated catchments. Drainage outlets of these accumulated catchments were considered as potential stormwater harvesting sites. These sites were screened and ranked under screening parameters namely demand, ratio of runoff to demand and weighted demand distance. The methodology described in this paper was successfully applied to a case study in Melbourne, Australia in collaboration with the local water utility. The methodology was found to be effective in supporting the selection of priority sites for stormwater harvesting schemes, as it provided the basis to identify, short-list and rank sites for further detailed investigation. The rapid identification of suitable sites for stormwater harvesting can assist planners in prioritising schemes in areas that will have the most impact on reducing potable water demand. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. ArcNLET: A GIS-based software to simulate groundwater nitrate load from septic systems to surface water bodies

    Science.gov (United States)

    Rios, J. Fernando; Ye, Ming; Wang, Liying; Lee, Paul Z.; Davis, Hal; Hicks, Rick

    2013-03-01

    Onsite wastewater treatment systems (OWTS), or septic systems, can be a significant source of nitrates in groundwater and surface water. The adverse effects that nitrates have on human and environmental health have given rise to the need to estimate the actual or potential level of nitrate contamination. With the goal of reducing data collection and preparation costs, and decreasing the time required to produce an estimate compared to complex nitrate modeling tools, we developed the ArcGIS-based Nitrate Load Estimation Toolkit (ArcNLET) software. Leveraging the power of geographic information systems (GIS), ArcNLET is an easy-to-use software capable of simulating nitrate transport in groundwater and estimating long-term nitrate loads from groundwater to surface water bodies. Data requirements are reduced by using simplified models of groundwater flow and nitrate transport which consider nitrate attenuation mechanisms (subsurface dispersion and denitrification) as well as spatial variability in the hydraulic parameters and septic tank distribution. ArcNLET provides a spatial distribution of nitrate plumes from multiple septic systems and a load estimate to water bodies. ArcNLET's conceptual model is divided into three sub-models: a groundwater flow model, a nitrate transport and fate model, and a load estimation model which are implemented as an extension to ArcGIS. The groundwater flow model uses a map of topography in order to generate a steady-state approximation of the water table. In a validation study, this approximation was found to correlate well with a water table produced by a calibrated numerical model although it was found that the degree to which the water table resembles the topography can vary greatly across the modeling domain. The transport model uses a semi-analytical solution to estimate the distribution of nitrate within groundwater, which is then used to estimate a nitrate load using a mass balance argument. The estimates given by ArcNLET are

  17. Environmental assessment process needs and future directions

    Energy Technology Data Exchange (ETDEWEB)

    Gustafson, P.F.

    1985-01-01

    The environmental assessment process as legislatively mandated by the National Environmental Policy Act of 1969 (NEPA) constitutes a double-edged sword as regards the successful management and disposal of radioactive waste. On the one hand, NEPA requires identification and disclosure of the environmental and societal consequences of a given major federal action, consideration of alternatives and/or mitigative measures leading to the same end result, a balancing of costs and benefits, and provides for and encourages public participation in the decision-making process regarding the proposed action(s). On the other hand, public participation supported by judicial decisions, based more upon procedural than substantive issues, may delay, alter, or indeed prohibit a proposed course of action. If the cognizant federal agencies (DOE and NRC in the radioactive waste area) comply with both the spirit and the letter of NEPA a framework for the successful management of radioactive wastes on all types can be developed. If however, these agencies are less than earnest in their NEPA compliance actions or if public opposition is backed by overzealous court action, any radioactive waste management/disposal action (however technically sound) can be hoisted upon a petard from which it may not be freed until well into the next century.

  18. Environmental assessment process needs and future directions

    International Nuclear Information System (INIS)

    Gustafson, P.F.

    1985-01-01

    The environmental assessment process as legislatively mandated by the National Environmental Policy Act of 1969 (NEPA) constitutes a double-edged sword as regards the successful management and disposal of radioactive waste. On the one hand, NEPA requires identification and disclosure of the environmental and societal consequences of a given major federal action, consideration of alternatives and/or mitigative measures leading to the same end result, a balancing of costs and benefits, and provides for and encourages public participation in the decision-making process regarding the proposed action(s). On the other hand, public participation supported by judicial decisions, based more upon procedural than substantive issues, may delay, alter, or indeed prohibit a proposed course of action. If the cognizant federal agencies (DOE and NRC in the radioactive waste area) comply with both the spirit and the letter of NEPA a framework for the successful management of radioactive wastes on all types can be developed. If however, these agencies are less than earnest in their NEPA compliance actions or if public opposition is backed by overzealous court action, any radioactive waste management/disposal action (however technically sound) can be hoisted upon a petard from which it may not be freed until well into the next century

  19. Environmental assessment report: Nuclear Test Technology Complex

    International Nuclear Information System (INIS)

    Tonnessen, K.; Tewes, H.A.

    1982-08-01

    The US Department of Energy (USDOE) is planning to construct and operate a structure, designated the Nuclear Test Technology Complex (NTTC), on a site located west of and adjacent to the Lawrence Livermore National Laboratory. The NTTC is designed to house 350 nuclear test program personnel, and will accommodate the needs of the entire staff of the continuing Nuclear Test Program (NTP). The project has three phases: land acquisition, facility construction and facility operation. The purpose of this environmental assessment report is to describe the activities associated with the three phases of the NTTC project and to evaluate potential environmental disruptions. The project site is located in a rural area of southeastern Alameda County, California, where the primary land use is agriculture; however, the County has zoned the area for industrial development. The environmental impacts of the project include surface disturbance, high noise levels, possible increases in site erosion, and decreased air quality. These impacts will occur primarily during the construction phase of the NTTC project and can be mitigated in part by measures proposed in this report

  20. Strategic environmental assessment in Hong Kong.

    Science.gov (United States)

    Ng, Kay Leng; Obbard, Jeffrey Philip

    2005-05-01

    This review examines the development and application of strategic environmental assessment (SEA) process in the planning framework of Hong Kong. Two strategic planning case studies are evaluated within the context of SEA, namely the Territorial Development Strategy Review (TDS Review) and the Third Comprehensive Transport Study (CTS-3). Rapid population growth and urbanisation in Hong Kong, coupled with a historic lack of planning controls and inherent conflicts between government departments have been major obstacles to achieving sustainable development in the territory. Despite these challenges, Hong Kong was one of the first Asian countries to apply SEA to major development plans, where the implementation of the 'SUSDEV 21' study on sustainable development has demonstrated the government's commitment towards integrated environmental protection. The application of SEA has provided decision-makers with key information on potential environment impacts arising from proposed developments, resulting in greater accountability and transparency in the decision-making process. SEA in Hong Kong has also prompted an increased level of environmental awareness and co-operation between government departments and agencies responsible for the management of Hong Kong's natural and urban environments. However, the application of SEA in Hong Kong continues to have notable limitations. SEA needs to evolve beyond its current sectoral application to examine ways in which development decisions can not only pre-empt and prevent environmental damage, but also positively enhance and restore existing natural resources. Current land use plans and transportation strategies still largely determine the pattern of development in the near future without adequate longer-term environmental cost-benefit analysis. Sustainable development includes environmental, social and economic considerations, and these inter-related elements need be suitably balanced. SEA is not a means to obstruct development

  1. Environmental assessment of submarine power cables

    International Nuclear Information System (INIS)

    Isus, Daniel; Martinez, Juan D.; Arteche, Amaya; Del Rio, Carmen; Madina, Virginia

    2011-03-01

    Extensive analyses conducted by the European Community revealed that offshore wind energy have relatively benign effects on the marine environment by comparison to other forms of electric power generation [1]. However, the materials employed in offshore wind power farms suffer major changes to be confined to the marine environment at extreme conditions: saline medium, hydrostatic pressure... which can produce an important corrosion effect. This phenomenon can affect on the one hand, to the material from the structural viewpoint and on the other hand, to the marine environment. In this sense, to better understand the environmental impacts of generating electricity from offshore wind energy, this study evaluated the life cycle assessment for some new designs of submarine power cables developed by General Cable. To achieve this goal, three approaches have been carried out: leaching tests, eco-toxicity tests and Life Cycle Assessment (LCA) methodologies. All of them are aimed to obtaining quantitative data for environmental assessment of selected submarine cables. LCA is a method used to assess environmental aspects and potential impacts of a product or activity. LCA does not include financial and social factors, which means that the results of an LCA cannot exclusively form the basis for assessment of a product's sustainability. Leaching tests results allowed to conclude that pH of seawater did not significantly changed by the presence of submarine three-core cables. Although, it was slightly higher in case of broken cable, pH values were nearly equals. Concerning to the heavy metals which could migrate to the aquatic medium, there were significant differences in both scenarios. The leaching of zinc is the major environmental concern during undersea operation of undamaged cables whereas the fully sectioned three-core cable produced the migration of significant quantities of copper and iron apart from the zinc migrated from the galvanized steel. Thus, the tar

  2. Assessment of Environmental Intention of Journalists

    Science.gov (United States)

    Skanavis, Constantina; Sakellari, Maria

    2007-01-01

    The main objective of environmental education (EE) is that citizens develop a responsible environmental behavior. Environmental awareness constitutes an important factor for the shaping of a responsible environmental behavior. The mass media can strengthen the degree of environmental awareness of the public, through the dissemination of…

  3. A GIS-based tool for bioaccumulation risk analysis and its application to study polychlorinated biphenyls in the Great Lakes

    Directory of Open Access Journals (Sweden)

    Fernanda P. Maciel

    2018-01-01

    Full Text Available This paper presents a GIS-based tool named Arc-BEST (Bioaccumulation Evaluation Screening Tool to perform spatially distributed bioaccumulation risk analyses. Estimating bioaccumulation risk is important to help predict potentially adverse effects from contaminants on ecosystems and human health, which are key factors in the development of sound public policy. Arc-BEST is based on the BEST model in the U.S. Army Corps of Engineers BRAMS (Bioaccumulation Risk Assessment Modeling System software, released in 2012. It predicts concentration of concern contaminants in predators’ tissues from concentrations in organisms at the bottom of the food chain, and corresponding bioaccumulation factors. Additionally, it estimates carcinogenic and non-carcinogenic risks for humans that consume those species. The greatest contribution of Arc-BEST is that it enables the automated use of digital spatial data sets, which improves model creation speed, analysis and visualization of results, and comparison and cross-referencing with other geographic datasets. Furthermore, the model was improved to consider up to four trophic levels. The code is written in Python and is open-source. In this work Arc-BEST is used as part of a screening-level risk assessment process in order to identify hot spots where further studies and monitoring should be performed to ensure humans and ecosystems health. The tool is successfully applied to a case study in the Laurentian Great Lakes, where long-term effects of polychlorinated biphenyls (PCBs is performed, based on measured concentrations in zebra mussels (Dreissena polymorpha, and local bioaccumulation factors from previous studies. Zebra mussels have a great filtration capacity and high bioconcentration rates, increasing the bioavailability of contaminants for predator species. PCBs concentrations in different-level predators are predicted. Furthermore, health risks for humans that consume sport fish are estimated for various

  4. Environmental Impact Analysis Process. Environmental Assessment for Combat Survivor/Evader Locator System Testing and Deployment

    National Research Council Canada - National Science Library

    1998-01-01

    This environmental assessment (EA) analyzes the potential environmental issues associated with the Developmental Testing and Operational Assessment of 35 production CSEL radios by DoD personnel at various existing DoD facilities...

  5. Assessment of the Aviation Environmental Design Tool

    Science.gov (United States)

    2009-06-29

    A comprehensive Tools Suite to allow for : thorough evaluation of the environmental effects and impacts : of aviation is currently being developed by the U.S. This suite : consists of the Environmental Design Space (EDS), the : Aviation Environmental...

  6. Boeotian landscapes. A GIS-based study for the reconstruction and interpretation of the archaeological datasets of ancient Boeotia.

    NARCIS (Netherlands)

    Farinetti, Emeri

    2009-01-01

    Aim of the work is to illustrate a possible way of dealing with a regional landscape and its long-term settlement history based on the integration of archaeological data applying a GIS based approach to the social dimension of the landscape. The large province area (ca 2,500 sqkm) of Boeotia

  7. Validating the accuracy of GIS-based accessibility analysis in determining public primary health care demand in Metropolitan areas

    CSIR Research Space (South Africa)

    Mokgalaka, H

    2014-07-01

    Full Text Available Geographical access is an important aspect of the health care planning process. GIS-based accessibility analysis is a logical method which can be applied to test the degree to which equitable access to services and facilities is obtained. The GIS...

  8. Environmental information system for visualizing environmental impact assessment information.

    Science.gov (United States)

    Cserny, Angelika; Kovács, Zsófia; Domokos, Endre; Rédey, Akos

    2009-01-01

    The Institute of Environmental Engineering at the University of Pannonia has undertaken the challenge to develop an online environmental information system. This system is able to receive and process the collected environmental data via Internet. The authors have attached importance to the presentation of the data and have included other comprehensible information for laymen as well in order to work out visualisation techniques that are expressive and attract attention for environmental questions through the developed information system. The ways of visualizing physical and chemical parameters of surface water and the effects of motorway construction were examined.

  9. Environmental assessment of domestic wood heating

    International Nuclear Information System (INIS)

    Labouze, E.; Le Guerin, Y.

    2009-01-01

    In France, more than 6 million families are concerned with the domestic use of wood energy. The wood energy plan of ADEME aims at encouraging the development of wood energy in three sectors: domestic, collective/tertiary, industrial. In that context, ADEME commissioned BIO Intelligence Service a life cycle assessment of collective and industrial heating in order to give objective environmental information and to analyse the strength and weakness of wood heating. Three scenarios were defined according to the origin of wood: firewood, granules and sawmill chips. The study also proposes a comparison to other heating systems: gas, fuel oil and electricity. The life cycle analysis applied to domestic heating consists in quantifying the environmental impacts of the whole linked steps: extraction of fuel, distribution, final use... Every system under study has been divided according to three main stages: - Extraction of raw materials; - Transport of fuels until the place of storage or distribution; - Use (combustion or upstream production of energy in the case of electricity). The environmental impacts are estimated with the following indicators: - Non renewable primary energy balance sheet; - Global warming potential; - Air acidification potential; - Eutrophication potential; - Emissions of toxic metals in air and in soils. The results show that wood heating have the best energy and global warming balance sheets. For air acidification, the combustion stage is pre-dominant regardless of the energy resource. This is mainly due to nitrogen and sulphur oxides airborne emissions. For wood heating, preparation requires fuel consumption which also contributes significantly to nitrogen oxides emissions. The comparison with conventional energy shows that the wood scenarios are well positioned in relation to fuel and electricity for this indicator. Gas appears to be the best heating option for this indicator. The contribution eutrophication is also due to nitrogen oxides airborne

  10. Integrated Environmental Assessment Part III: ExposureAssessment

    Energy Technology Data Exchange (ETDEWEB)

    McKone, Thomas E.; Small, Mitchell J.

    2006-06-01

    Human exposure assessment is a key step in estimating the environmental and public health burdens that result chemical emissions in the life cycle of an industrial product or service. This column presents the third in a series of overviews of the state of the art in integrated environmental assessment - earlier columns described emissions estimation (Frey and Small, 2003) and fate and transport modeling (Ramaswami, et al., 2004). When combined, these first two assessment elements provide estimates of ambient concentrations in the environment. Here we discuss how both models and measurements are used to translate ambient concentrations into metrics of human and ecological exposure, the necessary precursors to impact assessment. Exposure assessment is the process of measuring and/or modeling the magnitude, frequency and duration of contact between a potentially harmful agent and a target population, including the size and characteristics of that population (IPCS, 2001; Zartarian, et al., 2005). Ideally the exposure assessment process should characterize the sources, routes, pathways, and uncertainties in the assessment. Route of exposure refers to the way that an agent enters the receptor during an exposure event. Humans contact pollutants through three routes--inhalation, ingestion, and dermal uptake. Inhalation occurs in both outdoor environments and indoor environments where most people spend the majority of their time. Ingestion includes both water and food, as well as soil and dust uptake due to hand-to-mouth activity. Dermal uptake occurs through contacts with consumer products; indoor and outdoor surfaces; the water supply during washing or bathing; ambient surface waters during swimming or boating; soil during activities such as work, gardening, and play; and, to a lesser extent, from the air that surrounds us. An exposure pathway is the course that a pollutant takes from an ambient environmental medium (air, soil, water, biota, etc), to an exposure medium

  11. 31 CFR 26.3 - Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental...

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental Impact Assessments (EIAs). 26.3 Section 26.3 Money and... DEVELOPMENT BANDS (MDBs) § 26.3 Availability of Environmental Impact Assessment Summaries (EIA Summaries) and...

  12. Protocols for conducting Environmental Management Assessments of DOE organizations

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    To assess the effectiveness of DOE`s environmental programs, the Office of Environmental Audit conducts Environmental Management Assessments of DOE programs and facilities. These assessments take a broad programmatic view of environmental systems which may cover multiple sites. The focus of the assessment is on the infrastructure, systems, programs, and tools to manage environmental issues, not on the compliance issues themselves. Protocols have been developed to assist in the conduct of Environmental Management Assessments. The protocols are, based on and serve as implementing guidelines for the Environmental Management Section of ``Performance Objectives and Criteria for Conducting DOE Environmental Audits`` (DOE/EH-022). They are intended to provide guidance to the Assessment Team in conducting these reviews.

  13. Implementation of the Leaching Environmental Assessment ...

    Science.gov (United States)

    LEAF provides a uniform and integrated approach for evaluating leaching from solid materials (e.g., waste, treated wastes such as by solidification/stabilization, secondary materials such as blast furnace slags, energy residuals such as coal fly ash, soil, sediments, mining and mineral processing wastes). Assessment using LEAF applies a stepwise approach that considers the leaching behavior of COPCs in response to chemical and physical factors that control and material properties across a range of plausible field conditions (US EPA, 2010). The framework provides the flexibility to tailor testing to site conditions and select the extent of testing based on assessment objectives and the level of detailed information needed to support decision-making. The main focus will be to discuss the implementation of LEAF in the US and the How to Guide that has recently been completed. To present the How To Guide for the implementation of the leaching environmental assessment framework to an international audience already familiar with comparable leaching tests in use in Europe. Will be meeting with European colleagues on their interest in expanding methods to include organics.

  14. The paradox of strategic environmental assessment

    International Nuclear Information System (INIS)

    Bidstrup, Morten; Hansen, Anne Merrild

    2014-01-01

    Strategic Environmental Assessment (SEA) is a tool that can facilitate sustainable development and improve decision-making by introducing environmental concern early in planning processes. However, various international studies conclude that current planning practice is not taking full advantage of the tool, and we therefore define the paradox of SEA as the methodological ambiguity of non-strategic SEA. This article explores causality through at three-step case study on aggregates extraction planning in Denmark, which consists of a document analysis; a questionnaire survey and follow-up communication with key planners. Though the environmental reports on one hand largely lack strategic considerations, practitioners express an inherent will for strategy and reveal that their SEAs in fact have been an integrated part of the planning process. Institutional context is found to be the most significant barrier for a strategy and this suggests that non-strategic planning setups can prove more important than non-strategic planning in SEA practice. Planners may try to execute strategy within the confinements of SEA-restricted planning contexts; however, such efforts can be overlooked if evaluated by a narrow criterion for strategy formation. Consequently, the paradox may also spark from challenged documentation. These findings contribute to the common understanding of SEA quality; however, further research is needed on how to communicate and influence the strategic options which arguably remain inside non-strategic planning realities. - Highlights: • International studies conclude that SEAs are not strategic. = The paradox of SEA. • Even on the highest managerial level, some contexts do not leave room for strategy. • Non-strategic SEA can derive from challenged documentation. • Descriptive and emergent strategy formation can, in practice, be deemed non-strategic

  15. Final rapid reactivation project environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-10

    The US Department of Energy (DOE) has prepared an environmental assessment (EA) for the Rapid Reactivation Project at Sandia National Laboratories, New Mexico. The EA analyzes the potential effects of a proposal to increase production of neutron generators from the current capability of 600 units per year up to 2,000 units per year. The project would use existing buildings and infrastructure to the maximum extent possible to meet the additional production needs. The increased production levels would necessitate modifications and additions involving a total area of approximately 26,290 gross square feet at Sandia National Laboratories, New Mexico, Technical Area 1. Additional production equipment would be procured and installed. The no-action alternative would be to continue production activities at the current capability of 600 units per year. The EA analyzes effects on health, safety, and air quality, resulting from construction and operation and associated cumulative effects. A detailed description of the proposed action and its environmental consequences is presented in the EA.

  16. Final rapid reactivation project environmental assessment

    International Nuclear Information System (INIS)

    1999-01-01

    The US Department of Energy (DOE) has prepared an environmental assessment (EA) for the Rapid Reactivation Project at Sandia National Laboratories, New Mexico. The EA analyzes the potential effects of a proposal to increase production of neutron generators from the current capability of 600 units per year up to 2,000 units per year. The project would use existing buildings and infrastructure to the maximum extent possible to meet the additional production needs. The increased production levels would necessitate modifications and additions involving a total area of approximately 26,290 gross square feet at Sandia National Laboratories, New Mexico, Technical Area 1. Additional production equipment would be procured and installed. The no-action alternative would be to continue production activities at the current capability of 600 units per year. The EA analyzes effects on health, safety, and air quality, resulting from construction and operation and associated cumulative effects. A detailed description of the proposed action and its environmental consequences is presented in the EA

  17. 3000 Area Phase 1 environmental assessment

    International Nuclear Information System (INIS)

    Ranade, D.G.

    1995-09-01

    The US Department of Energy (DOE) is planning to sell the 3000 Area to prospective buyers. Environmental Services was requested by the WHC Economic Transition group to assess potential environmental liabilities in the area. Historical review of the area indicated that the site was the location of ''Camp Hanford'' in 1951 and has been used for a variety of purposes since then. The activities in the area have changed over the years. A number of Buildings from the area have been demolished and at least 15 underground storage tanks (USTs) have been removed. Part of the 3000 Area was identified as Operable Unit 1100-EM-3 in the Tri-Party Agreement and was cleaned up by the US Army Corps of Engineers (USACE). The cleanup included removal of contaminated soil and USTS. WHC and ICF KH had also performed sampling and analysis at some locations in the 3000 Area prior to USACE's work on the Operable Unit 1100-EM-3. They removed a number of USTs and performed remediation

  18. Assessing the environmental impact of geothermal residues

    International Nuclear Information System (INIS)

    Peralta, G.L.; Kirk, D.W.; Graydon, J.W.; Seyfried, P.L.

    1998-01-01

    Scale, sludge and drilling mud from three geothermal fields (Bulalo, Philippines; Cerro Prieto, Mexico; and Dixie Valley, USA) containing As, Cu, Cr, Zn and Pb at levels above the earth's crustal abundance were studied for their environmental impact. Several techniques and procedures were used to assess the risk posed by the residues: whole rock analysis, X- ray diffraction, radioactivity counting, protocol leach tests, toxicity testing, accelerated weathering test and a preliminary acid mine dramage potential test. There was no evidence of toxicity or genotoxicity present in any of the samples tested. Leaching tests indicated that all of the wastes could be classified as non-hazardous. One sample showed a low-level radio activity but it was still within the occupational dose limit. Three samples tested positive for acidification potential while none of the regulated elements were found in the leachate after three months of weathering test

  19. Environmental assessment, Deaf Smith County site, Texas

    International Nuclear Information System (INIS)

    1986-05-01

    The Nuclear Waste Policy Act of 1982 (42 USC sections 10101-10226) requires the environmental assessment of a proposed site to include a statement of the basis for nominating a site as suitable for characterization. Volume 2 provides a detailed statement evaluating the site suitability of the Deaf Smith County Site under DOE siting guidelines, as well as a comparison of the Deaf Smith County Site to the other sites under consideration. The evaluation of the Deaf Smith County Site is based on the impacts associated with the reference repository design, but the evaluation will not change if based on the Mission Plan repository concept. The second part of this document compares the Deaf Smith County Site to Davis Canyon, Hanford, Richton Dome and Yucca Mountain. This comparison is required under DOE guidelines and is not intended to directly support subsequent recommendation of three sites for characterization as candidate sites. 259 refs., 29 figs., 66 refs

  20. Environmental assessment, Deaf Smith County site, Texas

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-01

    The Nuclear Waste Policy Act of 1982 (42 USC sections 10101-10226) requires the environmental assessment of a proposed site to include a statement of the basis for nominating a site as suitable for characterization. Volume 2 provides a detailed statement evaluating the site suitability of the Deaf Smith County Site under DOE siting guidelines, as well as a comparison of the Deaf Smith County Site to the other sites under consideration. The evaluation of the Deaf Smith County Site is based on the impacts associated with the reference repository design, but the evaluation will not change if based on the Mission Plan repository concept. The second part of this document compares the Deaf Smith County Site to Davis Canyon, Hanford, Richton Dome and Yucca Mountain. This comparison is required under DOE guidelines and is not intended to directly support subsequent recommendation of three sites for characterization as candidate sites. 259 refs., 29 figs., 66 refs. (MHB)

  1. Environmental Management Assessment of the National Renewable Energy Laboratory (NREL)

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This report documents the results of the environmental management assessment performed at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. The onsite portion of the assessment was conducted from September 14 through September 27, 1993, by DOE`s Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). During this assessment, the activities conducted by the assessment team included reviews of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and NREL contractor personnel; and inspections and observations of selected facilities and operations. The environmental management assessment of NREL focused on the adequacy of environmental management systems and assessed the formality of programs employing an approach that recognizes the level of formality implementing environmental programs may vary commensurate with non-nuclear research and development operations. The Assessment Team evaluated environmental monitoring, waste management and National Environmental Policy Act (NEPA) activities at NREL, from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section of this report. The scope of the NREL Environmental Management Assessment was comprehensive and included all areas of environmental management. At the same time, environmental monitoring, waste management, and NEPA activities were evaluated to develop a programmatic understanding of these environmental disciplines, building upon the results of previous appraisals, audits, and reviews performed at the NREL.

  2. GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran

    Science.gov (United States)

    Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

    2015-01-01

    Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor’s Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the

  3. GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran.

    Science.gov (United States)

    Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

    2015-01-01

    Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor's Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the car

  4. Strategic environmental assessment can help solve environmental impact assessment failures in developing countries

    International Nuclear Information System (INIS)

    Alshuwaikhat, Habib M.

    2005-01-01

    The current trend of industrialization and urbanization in developing nations has a huge impact on anthropogenic and natural ecosystems. Pollution sources increase with the expansion of cities and cause contamination of water, air and soil. The absence of urban environmental planning and management strategies has resulted in greater concern for future urban development. This paper advocates the adoption of strategic environmental assessment (SEA) as a means to achieve sustainable development in developing countries. It investigates project-level environmental impact assessment (EIA) and its limitations. The exploration of SEA and its features are addressed. The effective implementation of SEA can create a roadmap for sustainable development. In many developing countries, the lack of transparency and accountability and ineffective public participation in the development of the policy, plan and program (PPP) would be mitigated by the SEA process. Moreover, the proactive and broadly based characteristics of SEA would benefit the institutional development of the PPP process, which is rarely experienced in many developing countries. The paper also explores the prospects for SEA and its guiding principles in developing countries. Finally, the paper calls for a coordinated effort between all government, nongovernment and international organizations involved with PPPs to enable developing countries to pursue a path of sustainable development through the development and application of strategic environmental assessment

  5. Conference on Environmental Assessment of Socioeconomic Systems

    CERN Document Server

    Ittelson, William

    1978-01-01

    Neglect of the relation between the socio-economic system and its natural environment has had detrimental consequences in the past, for example - the pollution of the natural environment (water, air and soil) by producing, using and consuming the products of our industrialized economy, - the forseeable exhaustion of natural resources by continuing the increase of industrial production. Most of the recent activities, both in research and in adminis­ tration, against these impacts have been technically oriented, with the aim of stimulating and introducing new technologies of produc­ tion and new products to diminish the environmental pollution. But these efforts, which are of course necessary, cannot be successful in approaching the aim - which should and must in the long-term view be defined as the development of society in balance with the natural environment. Therefore, in addition to an assess­ ment of technologies, emphasis should be put on an assessment of socio-economic systems. On di~~erent levels, i...

  6. Environmental risk assessment in GMO analysis.

    Science.gov (United States)

    Pirondini, Andrea; Marmiroli, Nelson

    2010-01-01

    Genetically modified or engineered organisms (GMOs, GEOs) are utilised in agriculture, expressing traits of interest, such as insect or herbicide resistance. Soybean, maize, cotton and oilseed rape are the GM crops with the largest acreage in the world. The distribution of GM acreage in the different countries is related with the different positions concerning labelling of GMO products: based on the principle of substantial equivalence, or rather based on the precautionary principle. The paper provides an overview on how the risks associated with release of GMO in the environments can be analysed and predicted, in view of a possible coexistence of GM and non-GM organisms in agriculture.Risk assessment procedures, both qualitative and quantitative, are compared in the context of application to GMOs considering also legislation requirements (Directive 2001/18/EC). Criteria and measurable properties to assess harm for human health and environmental safety are listed, and the possible consequences are evaluated in terms of significance.Finally, a mapping of the possible risks deriving from GMO release is reported, focusing on gene transfer to related species, horizontal gene transfer, direct and indirect effects on non target organisms, development of resistance in target organisms, and effects on biodiversity.

  7. Environmental assessment of the Greek transport sector

    International Nuclear Information System (INIS)

    Koroneos, C.; Nanaki, E.

    2007-01-01

    Transport constitutes a crucial factor to the quality of life, since many people depend greatly on access to a reliable transport system. However, there are concerns about the impacts of the transport system on the quality of life, since it constitutes one of the main sources of greenhouse gases and also gives rise to significant air pollution stemming from acidifying pollutants, ozone precursors and particulate matter. During the last decade, the demand for transport services in Greece has rapidly grown following the European trend. Transport policies have recognised the need to restrain transport growth and to improve the various transport modes. Technology and fuel improvements have resulted in decreases of emissions of certain pollutants. Taking into account the major role of road transport in Greece for both passenger and goods transport, this work is focused on the assessment of the Greek transport sector. The changes made in the Greek transport sector during the past decade as well as the adverse environmental impacts of the Greek transport sector are presented and analysed. This work aims to present, assess and investigate the progress of the Greek transport sector-over the past decade-in relation to its sustainability. The scope is to examine the effectiveness of various emission reduction measures, in terms of their effectiveness in reducing emissions from transport

  8. 44 CFR 10.9 - Preparation of environmental assessments.

    Science.gov (United States)

    2010-10-01

    ... assessment not to prepare an environmental impact statement, the Regional Administrator shall prepare a... prepare an environmental impact statement is based on a categorical exclusion. (f) Environmental Officer... assessments. 10.9 Section 10.9 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY...

  9. Theory and Practice of Transboundary Environmental Impact Assessment

    NARCIS (Netherlands)

    Bastmeijer, C.J.; Koivurova, T.

    2008-01-01

    Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

  10. Neotectonic control on drainage systems: GIS-based geomorphometric and morphotectonic assessment for Crete, Greece

    Science.gov (United States)

    Argyriou, Athanasios V.; Teeuw, Richard M.; Soupios, Pantelis; Sarris, Apostolos

    2017-11-01

    Geomorphic indices can be used to examine the geomorphological and tectonic processes responsible for the development of the drainage basins. Such indices can be dependent on tectonics, erosional processes and other factors that control the morphology of the landforms. The inter-relationships between geomorphic indices can determine the influence of regional tectonic activity in the shape development of drainage basins. A Multi-Criteria Decision Analysis (MCDA) procedure has been used to perform an integrated cluster analysis that highlights information associated with the dominant regional tectonic activity. Factor Analysis (FA) and Analytical Hierarchy Process (AHP) were considered within that procedure, producing a representation of the distributed regional tectonic activity of the drainage basins studied. The study area is western Crete, located in the outer fore-arc of the Hellenic subduction zone, one of the world's most tectonically active regions. The results indicate that in the landscape evolution of the study area (especially the western basins) tectonic controls dominate over lithological controls.

  11. The Maryland Coastal Plain Aquifer Information System: A GIS-based tool for assessing groundwater resources

    Science.gov (United States)

    Andreasen, David C.; Nardi, Mark R.; Staley, Andrew W.; Achmad, Grufron; Grace, John W.

    2016-01-01

    Groundwater is the source of drinking water for ∼1.4 million people in the Coastal Plain Province of Maryland (USA). In addition, groundwater is essential for commercial, industrial, and agricultural uses. Approximately 0.757 × 109 L d–1 (200 million gallons/d) were withdrawn in 2010. As a result of decades of withdrawals from the coastal plain confined aquifers, groundwater levels have declined by as much as 70 m (230 ft) from estimated prepumping levels. Other issues posing challenges to long-term groundwater sustainability include degraded water quality from both man-made and natural sources, reduced stream base flow, land subsidence, and changing recharge patterns (drought) caused by climate change. In Maryland, groundwater supply is managed primarily by the Maryland Department of the Environment, which seeks to balance reasonable use of the resource with long-term sustainability. The chief goal of groundwater management in Maryland is to ensure safe and adequate supplies for all current and future users through the implementation of appropriate usage, planning, and conservation policies. To assist in that effort, the geographic information system (GIS)–based Maryland Coastal Plain Aquifer Information System was developed as a tool to help water managers access and visualize groundwater data for use in the evaluation of groundwater allocation and use permits. The system, contained within an ESRI ArcMap desktop environment, includes both interpreted and basic data for 16 aquifers and 14 confining units. Data map layers include aquifer and ­confining unit layer surfaces, aquifer extents, borehole information, hydraulic properties, time-series groundwater-level data, well records, and geophysical and lithologic logs. The aquifer and confining unit layer surfaces were generated specifically for the GIS system. The system also contains select groundwater-quality data and map layers that quantify groundwater and surface-water withdrawals. The aquifer information system can serve as a pre- and postprocessing environment for groundwater-flow models for use in water-supply planning, development, and management. The system also can be expanded to include features that evaluate constraints to groundwater development, such as insufficient available drawdown, degraded groundwater quality, insufficient aquifer yields, and well-field interference. Ultimately, the aquifer information system is intended to function as an interactive Web-based utility that provides a broad array of information related to groundwater resources in Maryland’s coastal plain to a wide-ranging audience, including well drillers, consultants, academia, and the general public.

  12. Assessment of agricultural drought vulnerability in the Philippines using remote sensing and GIS-based techniques

    International Nuclear Information System (INIS)

    Macapagal, Marco D.; Olivares, Resi O.; Perez, Gay Jane P.

    2015-01-01

    Drought is a recurrent extreme climate event that can cause crop damage and yield loss, thereby inflicting negative socioeconomic impacts all over the world. According to several climate studies, drought events may be more frequent and more severe as global warming progresses. As an agricultural country, the Philippines is highly susceptible to adverse impacts of drought using remotely sensed information and geographic processing techniques. An agricultural drought vulnerability map identifying croplands that are least vulnerable, moderately vulnerable, and most vulnerable to crop water-related stress, was developed. Vulnerability factors, including land use system, irrigation support. Available soil-water holding capacity, as well as satellite-derived evapotranspiration and rainfall, were taken into consideration in classifying and mapping agricultural drought vulnerability at a national level. (author)

  13. GIS-BASED RISK ASSESSMENT OF PESTICIDE DRIFT CASE STUDY: FRESNO COUNTY, CALIFORNIA

    Science.gov (United States)

    The report describes the potential risk of herbicide drift and accidentally damaging neighboring crops or surrounding native vegetation. This study is the first to use the California Pesticide Use Reporting database within a mapping framework (known as a Geographic Information S...

  14. GIS based risk assessment of oil spill in the coastal areas of Akwa ...

    African Journals Online (AJOL)

    UFUOMA

    earnings of the country as the crude oil sector accounts for 90 to 95% of export revenues. Since most of information used for oil spill risk ... contributions to Nigeria's income - earning a total of. US$9197.5 million in export in 2001. ... In most risk management tasks, at least 90% of the information used has some form of spatial ...

  15. GIS-based assessment of groundwater level on extensive karst areas

    Science.gov (United States)

    Kopecskó, Zsanett; Józsa, Edina

    2016-04-01

    Karst topographies represent unique geographical regions containing caves and extensive underground water systems developed especially on soluble rocks such as limestone, marble and gypsum. The significance of these areas is evident considering that 12% of the ice-free continental area consists of landscapes developed on carbonate rocks and 20-25% of the global population depends mostly on groundwater obtained from these systems. Karst water reservoirs already give the 25% of the freshwater resources globally. Comprehensive studies considering these regions are the key to explore chances of the exploitation and to analyze the consequences of contamination, anthropogenic effects and natural processes within these specific hydro-geological characteristics. For the proposed work we chose several of the largest karst regions over the ice-free part of continents, representing diverse climatic and topographic characteristics. An important aspect of the study is that there are no available in situ hydrologic measurements over the entire research area that would provide discrete sampling of soil, ground and surface water. As replacement for the detailed surveys, multi remote sensing data (Gravity Recovery and Climate Experiment (GRACE) satellite derivatives products, Moderate Resolution Imaging Spectroradiometer (MODIS) satellite products and Tropical Rainfall Measuring Mission (TRMM) monthly rainfalls satellite datasets) are used along with model reanalysis data (Global Precipitation Climate Center data (GPCC) and Global Land Data Assimilation System (GLDAS)) to study the variation on extensive karst areas in response to the changing climate and anthropogenic effects. The analyses are carried out within open source software environment to enable sharing of the proposed algorithm. The GRASS GIS geoinformatic software and the R statistical program proved to be adequate choice to collect and analyze the above mentioned datasets by taking advantage of their interoperability. The workflow consists of the automated downloading of the satellite data; updating of the geospatial characteristics; repairing, filtering and evaluating of the datasets organized in GIS-databases and producing meaningful visualization as reports and maps for end-users. This study presents a flexible GIS and statistical analysis approach to provide information concerning groundwater vulnerability on karst areas by using available satellite-based datasets. The method allows the user to carry out comprehensive analysis within different time frames and scale ranges to explore long term characteristics or direct responses of a given karst system for external influences. The drawback of the method is the resolution of the currently available datasets, although even these results are significant in regions lacking detailed survey data.

  16. GIS based real time assessment of wildfire and other changes in a forest: A review

    International Nuclear Information System (INIS)

    Kallimani, Dr Vishweshwar; Chandra, Dr Bala; Vyas, Nihit; Kallimani, Jyoti

    2014-01-01

    Global warming has been one of the major concerns of the century. The causes of this problem are the green-house gases. Due to the manmade mistakes the carbon dioxide (CO 2 ) emission has reached highest of its level in recent years. Forest fires, haze and deforestation have contributed in increasing the CO 2 emissions to the atmosphere. Diagnosing these problems in the initial stage would definitely avert the major losses. This paper deals on detecting the changes in forest scenarios due to fire, felling of trees, etc. using a Geographical Information System (GIS) information analysis system using a pattern recognition concept, and detect the unusual changes and alert the system in early stage

  17. Capturing the view : a GIS based procedure to assess perceived landscape openness

    NARCIS (Netherlands)

    Weitkamp, S.G.

    2010-01-01

    The landscape is an important contributor to quality of life. People identify with landscapes and landscapes contribute to a sense of place and wellbeing. Changes in land use activities, such as agriculture, and in current spatial planning policies and practice accelerate the transformation of

  18. A GIS-based performance measurement system for assessing transportation sustainability and community livability : final report.

    Science.gov (United States)

    2014-08-31

    Sustainability and livability in transportation, as the concepts referring to the capability of transportation systems to maintain the well being of our society, have been widely : accepted as the critical principles to improve quality of life and he...

  19. GIS-based assessment of combined CSP electric power and seawater desalination plant for Duqum - Oman

    Energy Technology Data Exchange (ETDEWEB)

    Gastli, Adel [Department of Electrical and Computer Engineering, College of Engineering, Sultan Qaboos University, P.O. 33, Al-Khodh, Muscat-123 (Oman); Charabi, Yassine [Department of Geography, College of Arts, Sultan Qaboos University, P.O. 42, Al-Khodh, Muscat-123 (Oman); Zekri, Slim [Department of Natural Resource Economics, College of Agricultural and Marine Sciences, Sultan Qaboos University, P.O. 34, Al-Khodh, Muscat-123 (Oman)

    2010-02-15

    This paper investigates the potential of implementing combined electric power and seawater desalination plant using concentrated solar power technologies for Wilayat Duqum in Oman. Duqum is going through a considerable urban, touristic and industrial expansion and development. GIS solar radiation tools are used to select the most appropriate site for the plant location. There are basically two different options to combine concentrated solar electric power with seawater desalination. The first option is to combine a CSP plant with a thermal desalination unit, exploiting the exhaust heat of the steam cycle to drive a thermal desalination unit. The second option is to exploit only the electricity output of the CSP plant with a reverse osmosis desalination unit. The paper deals with both options and shows where each of the concepts has advantages considering local conditions: the quality of the input water, the demand of freshwater and/or potable water, social and economic aspects, the environment and others. (author)

  20. [Environmental damage assessment: international regulations and revelation to China].

    Science.gov (United States)

    Zhang, Hong-zhen; Cao, Dong; Yu, Fang; Wang, Jin-nan; Qi, Ji; Jia, Qian; Zhang, Tian-zhu; Luo, Yong-ming

    2013-05-01

    As the whole society gradually realizes the scarcity of nature resources and environmental value, countries all over the world have evolved and improved the system of environmental damage assessment through the practices of pollution prevention and ecological environmental protection. On one hand, in the research prospective, the practices of environmental damage assessment brought new challenges to environmental law, environmental economics, environmental science, environmental engineering, etc. On the other hand, they constantly promoted and developed relevant laws and regulations, techniques, working mechanism, and guidelines on procedure in practice. On the hasis of comparison and analysis of international practices and experiences from US, EU, and Japan, etc., this article identified relevant concepts, content, and scope of environmental damage assessment, and presented its scientific positioning and development direction. At present, both theory and practice of environmental damage assessment in China are in their infancy period. Considering current environmental situation and socioeconomic development features of China, learning international practices and experiences and raising the orientation of environmental damage assessment have great meaning in exploring the suitable environmental damage assessment system.

  1. Environmental Assessment Radioactive Source Recovery Program

    International Nuclear Information System (INIS)

    1995-01-01

    In a response to potential risks to public health and safety, the U.S. Department of Energy (DOE) is evaluating the recovery of sealed neutron sources under the Radioactive Source Recovery Program (RSRP). This proposed program would enhance the DOE's and the U.S. Nuclear Regulatory Commission's (NRC's) joint capabilities in the safe management of commercially held radioactive source materials. Currently there are no federal or commercial options for the recovery, storage, or disposal of sealed neutron sources. This Environmental Assessment (EA) analyzes the potential environmental impacts that would be expected to occur if the DOE were to implement a program for the receipt and recovery at the Los Alamos National Laboratory (LANL), Los Alamos, New Mexico, of unwanted and excess plutonium-beryllium ( 238 Pu-Be) and americium-beryllium ( 241 Am-Be) sealed neutron sources. About 1 kg (2.2 lb) plutonium and 3 kg (6.6 lb) americium would be recovered over a 15-year project. Personnel at LANL would receive neutron sources from companies, universities, source brokers, and government agencies across the country. These neutron sources would be temporarily stored in floor holes at the CMR Hot Cell Facility. Recovery reduces the neutron emissions from the source material and refers to a process by which: (1) the stainless steel cladding is removed from the neutron source material, (2) the mixture of the radioactive material (Pu-238 or Am-241) and beryllium that constitutes the neutron source material is chemically separated (recovered), and (3) the recovered Pu-238 or Am-241 is converted to an oxide form ( 238 PuO 2 or 241 AmO 2 ). The proposed action would include placing the 238 PuO 2 or 241 AmO 2 in interim storage in a special nuclear material vault at the LANL Plutonium Facility

  2. Environmental Sampling, Monitoring and Site Assessment Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — Quality Data Asset includes all current and historical data on environmental quality with regard to the presence of radiological contamination of all kinds regulated...

  3. A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping.

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

    2014-12-01

    Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having "very high susceptibility", with the further 31% falling into zones classified as having "high susceptibility".

  4. GIS-based bivariate statistical techniques for groundwater potential analysis (an example of Iran)

    Science.gov (United States)

    Haghizadeh, Ali; Moghaddam, Davoud Davoudi; Pourghasemi, Hamid Reza

    2017-12-01

    Groundwater potential analysis prepares better comprehension of hydrological settings of different regions. This study shows the potency of two GIS-based data driven bivariate techniques namely statistical index (SI) and Dempster-Shafer theory (DST) to analyze groundwater potential in Broujerd region of Iran. The research was done using 11 groundwater conditioning factors and 496 spring positions. Based on the ground water potential maps (GPMs) of SI and DST methods, 24.22% and 23.74% of the study area is covered by poor zone of groundwater potential, and 43.93% and 36.3% of Broujerd region is covered by good and very good potential zones, respectively. The validation of outcomes displayed that area under the curve (AUC) of SI and DST techniques are 81.23% and 79.41%, respectively, which shows SI method has slightly a better performance than the DST technique. Therefore, SI and DST methods are advantageous to analyze groundwater capacity and scrutinize the complicated relation between groundwater occurrence and groundwater conditioning factors, which permits investigation of both systemic and stochastic uncertainty. Finally, it can be realized that these techniques are very beneficial for groundwater potential analyzing and can be practical for water-resource management experts.

  5. Design of a GIS-Based Web Application for Simulating Biofuel Feedstock Yields

    Directory of Open Access Journals (Sweden)

    Olga Prilepova

    2014-07-01

    Full Text Available Short rotation woody crops (SRWC, such as hybrid poplar, have the potential to serve as a valuable feedstock for cellulosic biofuels. Spatial estimates of biomass yields under different management regimes are required for assisting stakeholders in making better management decisions and to establish viable woody cropping systems for biofuel production. To support stakeholders in their management decisions, we have developed a GIS-based web interface using a modified 3PG model for spatially predicting poplar biomass yields under different management and climate conditions in the U.S. Pacific Northwest region. The application is implemented with standard HTML5 components, allowing its use in a modern browser and dynamically adjusting to the client screen size and device. In addition, cloud storage of the results makes them accessible on any Internet-enabled device. The web interface appears simple, but is powerful in parameter manipulation and in visualizing and sharing the results. Overall, this application comprises dynamic features that enable users to run SRWC crop growth simulations based on GIS information and contributes significantly to choosing appropriate feedstock growing locations, anticipating the desired physiological properties of the feedstock and incorporating the management and policy analysis needed for growing hybrid poplar plantations.

  6. Cost optimization of a real-time GIS-based management system for hazardous waste transportation.

    Science.gov (United States)

    Zhu, Yun; Lin, Che-Jen; Zhong, Yilong; Zhou, Qing; Lin, Che-Jen; Chen, Chunyi

    2010-08-01

    In this paper, the design and cost analysis of a real-time, geographical information system (GIS) based management system for hazardous waste transportation are described. The implementation of such a system can effectively prevent illegal dumping and perform emergency responses during the transportation of hazardous wastes. A case study was conducted in Guangzhou, China to build a small-scale, real-time management system for waste transportation. Two alternatives were evaluated in terms of system capability and cost structure. Alternative I was the building of a complete real-time monitoring and management system in a governing agency; whereas alternative II was the combination of the existing management framework with a commercial Telematics service to achieve the desired level of monitoring and management. The technological framework under consideration included locating transportation vehicles using a global positioning system (GPS), exchanging vehicle location data via the Internet and Intranet, managing hazardous waste transportation using a government management system and responding to emergencies during transportation. Analysis of the cost structure showed that alternative II lowered the capital and operation cost by 38 and 56% in comparison with alternative I. It is demonstrated that efficient management can be achieved through integration of the existing technological components with additional cost benefits being achieved by streamlined software interfacing.

  7. Water quality laboratories in Colombia: a GIS-based study of urban and rural accessibility.

    Science.gov (United States)

    Wright, Jim; Liu, Jing; Bain, Robert; Perez, Andrea; Crocker, Jonny; Bartram, Jamie; Gundry, Stephen

    2014-07-01

    The objective of this study was to quantify sample transportation times associated with mandated microbiological monitoring of drinking-water in Colombia. World Health Organization Guidelines for Drinking-Water Quality recommend that samples spend no more than 6h between collection and analysis in a laboratory. Census data were used to estimate the minimum number of operational and surveillance samples required from piped water supplies under national regulations. Drive-times were then computed from each supply system to the nearest accredited laboratory and translated into sample holding times based on likely daily monitoring patterns. Of 62,502 surveillance samples required annually, 5694 (9.1%) were found to be more than 6 h from the nearest of 278 accredited laboratories. 612 samples (1.0%) were more than 24 hours' drive from the nearest accredited laboratory, the maximum sample holding time recommended by the World Health Organization. An estimated 30% of required rural samples would have to be stored for more than 6 h before reaching a laboratory. The analysis demonstrates the difficulty of undertaking microbiological monitoring in rural areas and small towns from a fixed laboratory network. Our GIS-based approach could be adapted to optimise monitoring strategies and support planning of testing and transportation infra-structure development. It could also be used to estimate sample transport and holding times in other countries. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Mapping Urban Heat Demand with the Use of GIS-Based Tools

    Directory of Open Access Journals (Sweden)

    Artur Wyrwa

    2017-05-01

    Full Text Available This article presents a bottom-up approach for calculation of the useful heat demand for space heating and hot water preparation using geo-referenced datasets for buildings at the city level. This geographic information system (GIS based approach was applied in the case study for the city of Krakow, where on the one hand the district heat network is well developed, while on the other hand there are still substantial number of buildings burning solid fuels in individual boilers and stoves, causing air pollution. The calculated heat demand was aggregated in the grid with 100 m × 100 m spatial resolution to deliver the heat map depicting the current situation for 21 buildings types. The results show that the residential buildings, in particular one- and multi-family buildings, have the highest share in overall demand for heat. By combining the results with location of the district heat (DH network, the potential areas in its close vicinity that have sufficient heat demand density for developing the net were pointed out. Future evolution in heat demand for space heating in one-family houses was evaluated with the use of deterministic method employing building stock model. The study lays a foundation for planning the development of the heating system at the city level.

  9. Development of a GIS-based monitoring and management system for underground coal mining safety

    Energy Technology Data Exchange (ETDEWEB)

    Salap, Seda; Karslioglu, Mahmut Onur [Civil Engineering Department, Geomatics Division, Middle East Technical University, Ankara (Turkey); Demirel, Nuray [Mining Engineering Department, Middle East Technical University, Ankara (Turkey)

    2009-11-01

    Coal mine safety is of paramount concern to mining industry. Mine accidents have various causes and consequences including catastrophic failure of mine, substantial economic losses and most notably loss of lives. Therefore, any initiative in mine monitoring is of vital importance for progressing safety surveillance and maintenance. This paper presents the development of a geographic information system (GIS)-based monitoring and management system for underground mine safety in three levels as constructive safety, surveillance and maintenance, and emergency. The developed model integrates the database design and management to the monitoring system implementation which encompasses query and analysis operations with the help of web and desktop applications. Interactive object-oriented graphical user interfaces (GUIs) were developed to visualize information about the entities gathered from the model and also to provide analysis operations based on the graphical representations and demonstrations using data tables and map objects. The research methodology essentially encompasses five main stages: (i) designing a conceptual database model; (ii) development of a logical model in terms of entity-relationship (ER) diagrams; (iii) development of a physical model based on physical constraints and requirements; (iv) development of GUIs and implementation of the developed model, analysis and queries; (v) verification and validation of the created model for Oemerler underground coal mine in Turkey. The proposed system is expected to be an efficient tool for improving and maintaining healthy standards in underground coal mines which can possibly be extended to a national GIS infrastructure. (author)

  10. Comparing GIS-based methods of measuring spatial accessibility to health services.

    Science.gov (United States)

    Yang, Duck-Hye; Goerge, Robert; Mullner, Ross

    2006-02-01

    The inequitable geographic distribution of health care resources has long been recognized as a problem in the United States. Traditional measures, such as a simple ratio of supply to demand in an area or distance to the closest provider, are easy measures for spatial accessibility. However the former one does not consider interactions between patients and providers across administrative borders and the latter does not account for the demand side, that is, the competition for the supply. With advancements in GIS, however, better measures of geographic accessibility, variants of a gravity model, have been applied. Among them are (1) a two-step floating catchment area (2SFCA) method and (2) a kernel density (KD) method. This microscopic study compared these two GIS-based measures of accessibility in our case study of dialysis service centers in Chicago. Our comparison study found a significant mismatch of the accessibility ratios between the two methods. Overall, the 2SFCA method produced better accessibility ratios. There is room for further improvement of the 2SFCA method-varying the radius of service area according to the type of provider or the type of neighborhood and determining the appropriate weight equation form-still warrant further study.

  11. GIS Based Multi-Criteria Decision Analysis For Cement Plant Site Selection For Cuddalore District

    Science.gov (United States)

    Chhabra, A.

    2015-12-01

    India's cement industry is a vital part of its economy, providing employment to more than a million people. On the back of growing demands, due to increased construction and infrastructural activities cement market in India is expected to grow at a compound annual growth rate (CAGR) of 8.96 percent during the period 2014-2019. In this study, GIS-based spatial Multi Criteria Decision Analysis (MCDA) is used to determine the optimum and alternative sites to setup a cement plant. This technique contains a set of evaluation criteria which are quantifiable indicators of the extent to which decision objectives are realized. In intersection with available GIS (Geographical Information System) and local ancillary data, the outputs of image analysis serves as input for the multi-criteria decision making system. Moreover, the following steps were performed so as to represent the criteria in GIS layers, which underwent the GIS analysis in order to get several potential sites. Satellite imagery from LANDSAT 8 and ASTER DEM were used for the analysis. Cuddalore District in Tamil Nadu was selected as the study site as limestone mining is already being carried out in that region which meets the criteria of raw material for cement production. Several other criteria considered were land use land cover (LULC) classification (built-up area, river, forest cover, wet land, barren land, harvest land and agriculture land), slope, proximity to road, railway and drainage networks.

  12. A GIS-based Quantitative Approach for the Search of Clandestine Graves, Italy.

    Science.gov (United States)

    Somma, Roberta; Cascio, Maria; Silvestro, Massimiliano; Torre, Eliana

    2017-10-30

    Previous research on the RAG color-coded prioritization systems for the discovery of clandestine graves has not considered all the factors influencing the burial site choice within a GIS project. The goal of this technical note was to discuss a GIS-based quantitative approach for the search of clandestine graves. The method is based on cross-referenced RAG maps with cumulative suitability factors to host a burial, leading to the editing of different search scenarios for ground searches showing high-(Red), medium-(Amber), and low-(Green) priority areas. The application of this procedure allowed several outcomes to be determined: If the concealment occurs at night, then the "search scenario without the visibility" will be the most effective one; if the concealment occurs in daylight, then the "search scenario with the DSM-based visibility" will be most appropriate; the different search scenarios may be cross-referenced with offender's confessions and eyewitnesses' testimonies to verify the veracity of their statements. © 2017 American Academy of Forensic Sciences.

  13. GIS-based landscape design research: Stourhead landscape garden as a case study

    Directory of Open Access Journals (Sweden)

    Steffen Nijhuis

    2017-11-01

    analysed, such as the visible form and the shape of the walk, and serves as the basis for the landscape architectonic analysis in which GIS is used as the primary analytical tool.  GIS-based design research has the possibility to cultivate spatial intelligence in landscape architecture through three fields of operation: • GIS-based modelling: description of existing and future landscape architectonic compositions in digital form; • GIS-based analysis: exploration, analysis and synthesis of landscape architectonic compositions in order to reveal latent architectonic relationships and principles, while utilizing the processing capacities and possibilities of computers for ex-ante and ex-post simulation and evaluation; • GIS-based visual representation: representation of (virtual landscape architectonic compositions in space and time, in order to retrieve and communicate information and knowledge of the landscape design.  Though there are limitations, this study exemplifies that GIS is a powerful instrument to acquire knowledge from landscape architectonic compositions. The study points out that the application of GIS in landscape design research can be seen as an extension of the fundamental cycle of observation, visual representation, analysis and interpretation in the process of knowledge acquisition, with alternative visualisations and digital landscape models as important means for this process. Using the calculating power of computers, combined with inventive modelling, analysis and visualisation concepts in an interactive process, opened up possibilities to reveal new information and knowledge about the basic, spatial, symbolic and programmatic form of Stourhead. GIS extended the design researchers’ perception via measurement, simulation and experimentation, and at the same time offered alternative ways of understanding the landscape architectonic composition. This gave rise to the possibility of exploring new elements in the framework of landscape design

  14. A GIS-based atmospheric dispersion model for pollutants emitted by complex source areas.

    Science.gov (United States)

    Teggi, Sergio; Costanzini, Sofia; Ghermandi, Grazia; Malagoli, Carlotta; Vinceti, Marco

    2018-01-01

    Gaussian dispersion models are widely used to simulate the concentrations and deposition fluxes of pollutants emitted by source areas. Very often, the calculation time limits the number of sources and receptors and the geometry of the sources must be simple and without holes. This paper presents CAREA, a new GIS-based Gaussian model for complex source areas. CAREA was coded in the Python language, and is largely based on a simplified formulation of the very popular and recognized AERMOD model. The model allows users to define in a GIS environment thousands of gridded or scattered receptors and thousands of complex sources with hundreds of vertices and holes. CAREA computes ground level, or near ground level, concentrations and dry deposition fluxes of pollutants. The input/output and the runs of the model can be completely managed in GIS environment (e.g. inside a GIS project). The paper presents the CAREA formulation and its applications to very complex test cases. The tests shows that the processing time are satisfactory and that the definition of sources and receptors and the output retrieval are quite easy in a GIS environment. CAREA and AERMOD are compared using simple and reproducible test cases. The comparison shows that CAREA satisfactorily reproduces AERMOD simulations and is considerably faster than AERMOD. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Environmental Assessment. Moanalua Shopping Center Redevelopment Oahu, Hawaii

    National Research Council Canada - National Science Library

    Pingree, Ryan; Halperin, William

    2004-01-01

    The Department of the Navy has prepared an Environmental Assessment (EA) and determined that an Environmental Impact Statement is not required for the redevelopment of the Moanalua Shopping Center (MSC) Oahu Hawaii...

  16. Environmental impact assessment of conventional and organic milk production

    NARCIS (Netherlands)

    Boer, de I.J.M.

    2003-01-01

    Organic agriculture addresses the public demand to diminish environmental pollution of agricultural production. Until now, however, only few studies tried to determine the integrated environmental impact of conventional versus organic production using life cycle assessment (LCA). The aim of this

  17. Environmental Monitoring and Assessment Program (EMAP) National Coastal Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Environmental Monitoring and Assessment Program (EMAP) National Coastal Database contains estuarine and coastal data that EMAP and Regional-EMAP have collected...

  18. Environmental impacts assessment: Instruments for environmental policy making and resource management

    International Nuclear Information System (INIS)

    Cavelli, C.M.; Sartori, S.

    1993-06-01

    This review of evaluation criteria for environmental impacts assessments in Italy covers the following aspects: the efficacy of current Italian normatives governing assessment methods, the current approach of regional public administrations, the necessity for the creation of a national regulating board, environmental impacts assessment for complex environmental systems, the application of impacts assessment recommendations to resource development modelling in the planning of integrated environmental-economic systems, the involvement of the general public in decision making, techniques to determine the monetary worth of environmental resources, the use of multi-criteria analysis techniques

  19. Technology needs assessment for DOE environmental restoration programs

    International Nuclear Information System (INIS)

    Duray, J.R.; Carlson, T.J.; Carpenter, C.E.; Cummins, L.E.; Daub, G.J.

    1992-01-01

    The 'Technology Needs Assessment Final Report' describes current and planned environmental restoration activity, identifies technologies intended to be used or under consideration, and ranks technology deficiencies in the U.S. Department of Energy's environmental restoration program. Included in the ranking are treatment technologies, characterization technologies, and non-technology issues that affect environmental restoration. Data used for the assessment was gathered during interviews in the spring of 1991 with DOE site personnel responsible for the environmental restoration work. (author)

  20. Eco-Balancing as a Guideline for Environmentally Sound Regional Planning Supported by GIS Applications

    Directory of Open Access Journals (Sweden)

    ROMAN J. M. LENZ

    2005-01-01

    Full Text Available During the last several years, environmental impact assessment, regional or spatial planning, and environmental balancing seem to develop similarities, e.g. joint basic methodological approaches such as the use of environmental indicators, the focus on same environmental goods such air, water, soil, flora/fauna, etc. (Lenz 1999. Especially GIS-based software systems show their multiple applications in these fields.After a short introduction about the central role of indicators in transdisciplinary problem solving processes, experiences from a set of regional environmental (or eco balances show a wide range of advantages as well as disadvantages in the context of the widespread use of GIS-based planning tools. Relying on concepts and examples for the spatial eco-balances in the district of Pfaffenhofen (Upper Bavaria, Germany; cf. Lenz 1997 and the municipality of Mulfingen (Hohenlohe, Germany - both of them related to the concept of environmental indicators of the Advisory Board of Environmental Affairs of the Federal Republic of Germany (SRU 1994 and the Federal Environmental Agency (UBA 1995 - we can show GIS-based information systems of a high practical relevancy. On the basis of the GIS software ArcView, the data base management system Access, and html scripts, we developed environmental information systems to balance environmental effects in a map scale of 1:5,000 - 1:50,000, in order to provide the administration with tools for an environmentally sound and sustainable development of their area (Lenz 1997, 1999, Beuttler et al. 1999. The spatial distribution of land use types, solar energy potential, area consumption and drinking water consumption for the municipality of Mulfingen are highlighted in this paper. Still, the practical use of the systems seems to be limited due to the lack of computer skills among the administrators – even after programming graphical user interfaces for the indicator “drinking water consumption”-, as well

  1. Environmental Cost Accounting – Assessing the Environmental Responsibility Effort

    Directory of Open Access Journals (Sweden)

    Florian Marcel Nuțǎ

    2012-05-01

    Full Text Available The paper’s aim is to evaluate different approaches of environmental cost accounting used aroundthe world. One of the main issues of modern enterprise is to affirm its responsible behavior and to connect itwith a positive economic benefit for the shareholders. Practically the management systems must find a way toaddress all the stakeholders’ interests and needs.

  2. 34 CFR 75.601 - Applicant's assessment of environmental impact.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Applicant's assessment of environmental impact. 75.601... Conditions Must Be Met by a Grantee? Construction § 75.601 Applicant's assessment of environmental impact. An applicant shall include with its application its assessment of the impact of the proposed construction on...

  3. Environmental assessment: Davis Canyon site, Utah

    International Nuclear Information System (INIS)

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high- level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has found that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of the five sites suitable for characterization

  4. Environmental assessment: Davis Canyon site, Utah

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high- level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has found that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of the five sites suitable for characterization.

  5. Environmental assessment: Richton Dome site, Mississippi

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Richton Dome site in Mississippi as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Richton Dome site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. The site is in the Gulf interior region, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains two other potentially acceptable sites--the Cypress Creek Dome site in Mississippi and the Vacherie Dome site in Louisiana. Although the Cypress Creek Dome and the Vacherie Dome sites are suitable for site characterization, the DOE has concluded that the Richton Dome site is the preferred site in the Gulf interior region. On the basis of the evaluations reported in this EA, the DOE has found that the Richton Dome site is not disqualified under the guidelines.

  6. Environmental assessment: Richton Dome Site, Mississippi

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Richton Dome site in Mississippi as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Richton Dome site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. The site is in the Gulf interior region, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains two other potentially acceptable sites--the Cypress Creek Dome site in Mississippi and the Vacherie Dome site in Louisiana. Although the Cypress Creek Dome and the Vacherie Dome sites are suitable for site characterization, the DOE has concluded that the Richton Dome site is the preferred site in the Gulf interior region. On the basis of the evaluations reported in this EA, the DOE has found that the Richton Dome site is not disqualified under the guidelines.

  7. Environmental assessment: Richton Dome site, Mississippi

    International Nuclear Information System (INIS)

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Richton Dome site in Mississippi as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Richton Dome site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. The site is in the Gulf interior region, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains two other potentially acceptable sites--the Cypress Creek Dome site in Mississippi and the Vacherie Dome site in Louisiana. Although the Cypress Creek Dome and the Vacherie Dome sites are suitable for site characterization, the DOE has concluded that the Richton Dome site is the preferred site in the Gulf interior region. On the basis of the evaluations reported in this EA, the DOE has found that the Richton Dome site is not disqualified under the guidelines

  8. Environmental assessment: Davis Canyon site, Utah

    International Nuclear Information System (INIS)

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considering for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has found that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of five sites suitable for characterization

  9. Environmental assessment: Davis Canyon site, Utah

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considering for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has found that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of five sites suitable for characterization.

  10. Environmental assessment: Richton Dome Site, Mississippi

    International Nuclear Information System (INIS)

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Richton Dome site in Mississippi as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Richton Dome site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. The site is in the Gulf interior region, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains two other potentially acceptable sites--the Cypress Creek Dome site in Mississippi and the Vacherie Dome site in Louisiana. Although the Cypress Creek Dome and the Vacherie Dome sites are suitable for site characterization, the DOE has concluded that the Richton Dome site is the preferred site in the Gulf interior region. On the basis of the evaluations reported in this EA, the DOE has found that the Richton Dome site is not disqualified under the guidelines

  11. Framework for conducting environmental assessments of trade negotiations

    International Nuclear Information System (INIS)

    2001-02-01

    This document described the complex task of assessing the environmental impacts of trade negotiations with particular emphasis on the framework of the Strategic Environmental Assessment which the Government of Canada will conduct through a systematic process which can identify and evaluate possible and significant environmental impacts of an initiative. The objective of the assessment is to integrate environmental considerations into decision-making processes at the earliest possible stage. The first part of the framework identifies the importance of recognizing environmental considerations of trade and explains how the framework will contribute to environmental policy. The second part of the framework outlines the process and analytical requirements for conducting an environmental assessment of a trade negotiation. Environmental Assessment Committees will be formed by the Department of Foreign Affairs and International Trade, and will include representatives from federal government departments and agencies. All analyses will be conducted in four stages which will include identifying the economic effect of the negotiation, identifying the likely environmental impact of such changes, assessing the significance of the likely environmental impacts, and identifying enhancement/mitigation options to inform the negotiations. The framework is designed to be flexible enough to be used at current and future trade negotiations in the World Trade Organization, the Free Trade Area of the Americas and in bilateral Free Trade Agreements. An environmental assessment of trade negotiations is considered to be an important decision-making tool for promoting sustainable development. 16 refs., 1 tab

  12. Comparative study for environmental assessment by program characters

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Suk Chul; Lee, Young Soo; Park, Young Min; Park, Suk Soon; Chung, Kyung Tae; Cho, Hong Yun; Chae, Jang Won; Lee, Sang Don; Lee, Chan Ho; Choi, Joon Kyu; Kim, Kang Joo; Chung, Won Moo; Jin, Jae Yool [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    The level of environmental assessment in Korea was diagnosed by examining the situation of its model for the entire environmental assessment implemented. Also, it proposed an improvement scheme for its problems to be able to advance. It is expected to be utilized as developing optimum model for Korea and establishing a systematic and concrete guideline for environmental assessment modeling. 244 refs., 65 figs., 28 tabs.

  13. Radiological risk assessment of environmental radon

    Science.gov (United States)

    Khalid, Norafatin; Majid, Amran Ab; Yahaya, Redzuwan; Yasir, Muhammad Samudi

    2013-11-01

    Measurements of radon gas (222Rn) in the environmental are important to assess indoor air quality and to study the potential risk to human health. Generally known that exposure to radon is considered the second leading cause of lung cancer after smoking. The environmental radon concentration depends on the 226Ra concentration, indoor atmosphere, cracking on rocks and building materials. This study was carried out to determine the indoor radon concentration from selected samples of tin tailings (amang) and building materials in an airtight sealed homemade radon chamber. The radiological risk assessment for radon gas was also calculated based on the annual exposure dose, effective dose equivalent, radon exhalation rates and fatal cancer risk. The continuous radon monitor Sun Nuclear model 1029 was used to measure the radon concentration emanates from selected samples for 96 hours. Five types of tin tailings collected from Kampar, Perak and four samples of building materials commonly used in Malaysia dwellings or building constructions were analysed for radon concentration. The indoor radon concentration determined in ilmenite, monazite, struverite, xenotime and zircon samples varies from 219.6 ± 76.8 Bq m-3 to 571.1 ± 251.4 Bq m-3, 101.0 ± 41.0 Bq m-3 to 245.3 ± 100.2 Bq m-3, 53.1 ± 7.5 Bq m-3 to 181.8 ± 9.7 Bq m-3, 256.1 ± 59.3 Bq m-3 to 652.2 ± 222.2 Bq m-3 and 164.5 ± 75.9 Bq m-3 to 653.3 ± 240.0 Bq m-3, respectively. Whereas, in the building materials, the radon concentration from cement brick, red-clay brick, gravel aggregate and cement showed 396.3 ± 194.3 Bq m-3, 192.1 ± 75.4 Bq m-3, 176.1 ± 85.9 Bq m-3 and 28.4 ± 5.7 Bq m-3, respectively. The radon concentration in tin tailings and building materials were found to be much higher in xenotime and cement brick samples than others. All samples in tin tailings were exceeded the action level for radon gas of 148 Bq m-3 proposed by EPA except monazite 0.15 kg, struverite 0.15 kg and 0.25 kg. Whereas

  14. Utilizing coal remaining resources and post-mining land use planning based on GIS-based optimization method : study case at PT Adaro coal mine in South Kalimantan

    Directory of Open Access Journals (Sweden)

    Mohamad Anis

    2017-06-01

    Full Text Available Coal mining activities may cause a series of environmental and socio-economic issues in communities around the mining area. Mining can become an obstacle to environmental sustainability and a major hidden danger to the security of the local ecology. Therefore, the coal mining industry should follow some specific principles and factors in achieving sustainable development. These factors include geological conditions, land use, mining technology, environmental sustainability policies and government regulations, socio-economic factors, as well as sustainability optimization for post-mining land use. Resources of the remains of the coal which is defined as the last remaining condition of the resources and reserves of coal when the coal companies have already completed the life of the mine or the expiration of the licensing contract (in accordance with government permission. This research uses approch of knowledge-driven GIS based methods mainly Analytical Hierarchy Process (AHP and Fuzzy logic for utilizing coal remaining resources and post-mining land use planning. The mining area selected for this study belongs to a PKP2B (Work Agreement for Coal Mining company named Adaro Indonesia (PT Adaro. The result shows that geologically the existing formation is dominated by Coal Bearing Formation (Warukin Formation which allows the presence of remains coal resource potential after the lifetime of mine, and the suitability of rubber plantation for the optimization of land use in all mining sites and also in some disposal places in conservation areas and protected forests.

  15. Environmental Gradient Analysis, Ordination, and Classification in Environmental Impact Assessments.

    Science.gov (United States)

    1987-09-01

    associations. The proposed methodology can also be applied to land-use management, maintenance and monitoring programs, and to environmental impact...analysis. Analytical results were then examined and the advantages and disadvantages of each stastistical analysis method used were noted. Mode of Technology...and S. Wearden, Statistics for Research (John Wiley & Sons, New York, NY, 1983). 20a. Draper, N. R., and H. Smith, Applied Regression Analysis, 2nd

  16. Environmental risk assessment: an Australian perspective. Supervising Scientist Report 102

    International Nuclear Information System (INIS)

    Beer, T.; Ziolkowski, F.

    1995-01-01

    Environmental risk assessment can be used as a strategic tool to set environmental priorities and as a tactical tool to set environmental standards. This report is designed to inform Australian environmental managers about the techniques and applications of environmental risk assessment and to familiarize risk analysts with some of the issues that are of concern to environmental managers. The use of risk assessment is illustrated by applying its techniques to five case studies which include: risk from chemicals and from contaminated sites; risk to people and to the natural environment from development, such as uranium mining; climate change; and risk associated with political decision-making. Then, by considering Australian and overseas practice, a generic framework is presented within which environmental risk assessment in Australia can be undertaken, and possible methods of implementation are discussed. refs., 38 figs

  17. A biologic approach to environmental assessment and epidemiology

    National Research Council Canada - National Science Library

    Smith, Thomas J; Kriebel, David

    2010-01-01

    .... The two key fields of study on this issue, environmental epidemiology and exposure assessment, are still given separate names because of their separate historical roots and scientific traditions...

  18. Quality Management Plan for the Environmental Assessment and Innovation Division

    Science.gov (United States)

    Quality management plan (QMP) which identifies the mission, roles, responsibilities of personnel with regard to quality assurance and quality management for the environmental assessment and innovation division.

  19. Preliminary environmental site assessments in New York City

    International Nuclear Information System (INIS)

    Lundy, P.; Gasson, D.R.; Longendyke, S.T.

    1991-01-01

    Preliminary Environmental Site Assessments are often performed prior to real estate transactions or refinancing. These assessments are typically performed for real estate buyers, sellers and lending institutions. Undertaking a Preliminary Environmental Site Assessment in New York City can often be quite complex and time-consuming. This is due, in part, to the age and density of buildings in the city as well as the myriad of regulatory agencies with jurisdiction over environmental issues. This paper will discuss how environmental assessments are performed with a special emphasis on building in New York City. In includes hazardous wastes management for Radon, PCB's and asbestos

  20. Quantifying the performance of automated GIS-based geomorphological approaches for riparian zone delineation using digital elevation models

    OpenAIRE

    D. Fernández; J. Barquín; M. Álvarez-Cabria; F. J. Peñas

    2012-01-01

    Riparian zone delineation is a central issue for managing rivers and adjacent areas; however, criteria used to delineate them are still under debate. The area inundated by a 50-yr flood has been indicated as an optimal hydrological descriptor for riparian areas. This detailed hydrological information is usually only available for populated areas at risk of flooding. In this work we created several floodplain surfaces by means of two different GIS-based geomorphological appro...

  1. Patient Accessibility to Hospitals in Winter Road Conditions: GIS-Based Analysis Using Car Navigation Probe Data.

    Science.gov (United States)

    Tanikawa, Takumi; Ohba, Hisateru; Yagahara, Ayako; Ogasawara, Katsuhiko

    2017-01-01

    The purpose of this study was to estimate geographical patient flow to hospitals during winter seasons using simulation analysis. We used probe data collected from car navigation systems and performed a Geographical Information System (GIS)-based analysis to determine the relationship between travel time to hospitals and winter road conditions. Accessibility to hospitals based on travel time in summer and winter was overlayed on a map to demonstrate the increase in travel time during winter.

  2. A Study on improvement of environmental assessment system in social, economic, and environmental sectors

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Young Sook; Koo, Doh Wan; Keum, Kee Yong [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    The environmental assessment system is assessed as a mechanism that can achieve the goal for environmental policy in 21st century. As it can evaluate social and economic feasibility of large-scale development program, this system can achieve a sustainable society by mitigating social conflicts arising from environmental problems. For making the environmental assessment system substantial, this study was implemented by the need of improvement of the system, by analyzing problems of social, economic, and environmental evaluation, which is implemented under the present system. 44 refs., 1 fig., 25 tabs.

  3. Promoting compliance at DOE: Tiger team assessments and environmental audits

    International Nuclear Information System (INIS)

    Green, R.S.; Crawford, V.I.

    1993-01-01

    The Office of Environmental Audit, within the Department of Energy's Office of Environment, Safety and Health, has effected positive environmental results across the DOE complex. Beginning in the mid 1980's, a concerted effort was established by DOE upper management to achieve environmental consciousness and responsibility. The Office of Environmental Audit was established to conduct and Environmental survey to define environmental problems caused by 40 years of operation at DOE production and research facilities. The Office provided initial identification of DOE sites requiring environmental restoration and assured plans were developed to address these environmental problems. Initiated by massive problems in the environmental operations at DOE's Rocky Flats Plant in Colorado, Tiger Team Assessments (TTA) followed. TTAs established a compliance baseline and evaluated management with respect to environment, safety, and health. The Tiger Teams assured plans were established to correct deficiencies including root causes. As part of this comprehensive effort, the Office of Environmental Audit led the environmental component of the TTAs. With TTAs completed, the Office's future vision entails addressing new environmental regulations and world changes affecting DOE operations. To proactively continue its efforts to effect positive environmental change, the Office is headed toward a comprehensive cross-cutting program that conducts environmental management assessments, reassesses the environmental progress of formerly audited facilities, and evaluates special focuses environmental issues that span across the DOE complex. Through these efforts, the Office of Environmental Audit will determine the environmental activities which address environmental problems and identify environmental problems requiring resolution. Following trending analyses, the Office will disseminate information describing mechanisms to pursue and pitfalls to avoid to achieve environmental excellence

  4. 22 CFR 216.6 - Environmental assessments.

    Science.gov (United States)

    2010-04-01

    ... Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ENVIRONMENTAL PROCEDURES § 216.6 Environmental... avoided should the proposed action be implemented; the relationship between short-term uses of the... will eliminate significant effects for classes of actions shall be made available for public comment...

  5. Assessment of environmental awareness among secondary school ...

    African Journals Online (AJOL)

    The major finding of study reveals that teachers possessed positive attitudes towards both environmental issues and environmental education. We found that contrary to a number of findings from studies in other parts of the world, male respondents were the most concerned about the environment and more knowledgeable ...

  6. The KULTURisk Regional Risk Assessment methodology for water-related natural hazards - Part 1: Physical-environmental assessment

    Science.gov (United States)

    Ronco, P.; Gallina, V.; Torresan, S.; Zabeo, A.; Semenzin, E.; Critto, A.; Marcomini, A.

    2014-12-01

    , exposure and vulnerability. It integrates the outputs of various hydrodynamic models with site-specific bio-geophysical and socio-economic indicators (e.g. slope, land cover, population density, economic activities etc.) to develop tailored risk indexes and GIS-based maps for each of the selected receptors (i.e. people, buildings, infrastructure, agriculture, natural and semi-natural systems, cultural heritage) in the considered region. It further compares the baseline scenario with alternative scenarios, where different structural and/or non-structural mitigation measures are planned and eventually implemented. As demonstrated in the companion paper (Part 2, Ronco et al., 2014), risk maps, along with related statistics, allow one to identify and classify, on a relative scale, areas at risk which are more likely to be affected by floods and support the development of strategic adaptation and prevention measures to minimizing flood impacts. In addition, the outcomes of the RRA can be eventually used for a further socio-economic assessment, considering the tangible and intangible costs as well as the human dimension of vulnerability.

  7. Environmental radioactivity assessment for Bayburt, Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Kucukomeroglu, B; Kurnaz, A; Cevik, U [Department of Physics, Karadeniz Technical University, Trabzon (Turkey); Damla, N [Department of Physics, Batman University, Batman (Turkey); Celebi, N; Ataksor, B; Taskin, H [Cekmece Nuclear Research and Training Centre, Altinsehir Yolu, Halkali, Istanbul (Turkey)], E-mail: ndamla@ktu.edu.tr

    2009-09-01

    This study assesses the results of environmental radioactivity measurements for Bayburt Province in the Eastern Black Sea area of Turkey. Using {gamma}-ray spectrometry, activity concentrations of the natural radionuclides {sup 226}Ra, {sup 232}Th and {sup 40}K and a fission product {sup 137}Cs were investigated in soil samples. The activity concentrations of {sup 226}Ra, {sup 232}Th and {sup 40}K in various building materials such as sand, cement and marble and in drinking waters were determined. The activity concentrations vary from 16 to 54 Bq kg{sup -1} for {sup 226}Ra, from 10 to 21 Bq kg{sup -1} for {sup 232}Th and from 113 to 542 Bq kg{sup -1} for {sup 40}K in building materials. The mean specific activity concentrations of {sup 226}Ra, {sup 232}Th and {sup 40}K in drinking waters were 93, 30 and 504 mBq l{sup -1}, respectively. The concentrations of gross {alpha} and {beta} radioactivity in drinking water samples collected from four different sampling stations have been determined. The results show that the gross {alpha} and {beta} activities are lower than the screening levels given by the World Health Organization (WHO), which are a maximum contaminant level of 0.5 Bq l{sup -1} and 1.0 Bq l{sup -1} gross {alpha} and {beta} radioactivity, respectively, in drinking water. Indoor radon measurements were made in 44 dwellings in Bayburt by using Cr-39 detectors. Radon concentrations in dwellings in Bayburt varied from 17 to 125 Bq m{sup -3} and the average value was 56 Bq m{sup -3}. The results obtained in this study indicate that the region has a background radiation level that is within the typical natural range and shows no significant departures from other parts of the country.

  8. Environmental assessment: Davis Canyon site, Utah

    International Nuclear Information System (INIS)

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has fond that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of five sites suitable for characterization. 181 figs., 175 tabs

  9. Environmental assessment: Davis Canyon site, Utah

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has fond that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of five sites suitable for characterization. 181 figs., 175 tabs.

  10. Mark Online, a Full Scale GIS-based Danish Farm Management Information System

    Directory of Open Access Journals (Sweden)

    Jens Bligaard

    2015-01-01

    Full Text Available With its oceanic climate with moderate summers and mild winters in combination with a highly organized infrastructure, farming has traditionally been very intensive in Denmark. The cultivated land constitutes 26,000 km² out of a total of 43,000 km². Most of the arable land is used for intensive plant production with a high level of mechanization and management practices. For more than three decades The Knowledge Centre for Agriculture (KCA has developed and implemented ICT Farm Management Information Systems (FMIS for planning and documentation of all aspects of crop production. Today, updated field specific information on field size, soil type, crops, varieties, soil tillage, sowing, fertilization, pesticide usage etc. is now hosted in the GIS-based FMIS, Mark Online covering more than 80% of the arable land. A centralized Microsoft SQL data base forms the core base for all the information. Based on a MS .NET framework a number of multi-tier client-server applications have been developed. Most of the desk top applications consist of relative thick clients based on Win forms, whereas HTML5 apps and Android/IOS native apps are used for the mobile platform. Data exchange between the clients and server are based on a web service layer using data compression to improve performance. Farmers are one of the two primary target groups. Local agricultural advisors working on behalf of farmers not having their own software is the other primary target group. Nonetheless, both groups are mainly focusing on field record planning, decision making and documentation. Data is transferred between the Mark Online system and the authorities by XML-based web services or ordinary file upload to official websites. The Open Geospatial Consortium’s Web Feature Service (WFS provides another interface allowing requests for geospatial features, which is used between Mark Online and external GIS.

  11. Using catenas for GIS-based mapping of NW Mediterranean littoral habitats

    Science.gov (United States)

    Mariani, Simone; Cefalì, Maria Elena; Terradas, Marc; Chappuis, Eglantine; Ballesteros, Enric

    2014-06-01

    Studies aimed at describing habitats and mapping their distributions are pivotal to implementing management plans and to effectively guide conservation measures. We developed a novel approach of data collection and entry (CAT-LIT) to establish a detailed cartography of the littoral habitats found along the Catalan coast (Spain). Field data were recorded using coded, two-digit hierarchical lists (e.g. Aa, Ab, etc.) of horizons found at each point along the coast, called catenas. The horizons were either dominated by species (on the rocky bottoms) or sediment types (on the beaches) and corresponded to LPRE, EUNIS and CORINE habitats. Catenas were transferred into a database and calculations about the extent of bottom types, habitats, and catenas themselves along the coast were carried out with GIS tools. In addition, habitat link richness was calculated and represented using network analysis programs. The application of CAT-LIT to the Catalan coast showed that the habitats dominated by the lichen Verrucaria amphibia and the flattened barnacle Euraphia depressa and those dominated by the barnacle Chthamalus spp. were almost ubiquitous. Those dominated by the red alga Corallina elongata, the mussel Mytilus galloprovincialis and the red alga Rissoella verruculosa were also common. Because of the frequency of their connections, those habitats formed a huge hub of links in the networks. By using catenas, the habitats can be viewed using GIS based programs keeping the catena as the main informational and ecological unit. The catenas allow maximum compactness when vertically distributed habitats are to be shown on a 2D map. The complete cartography and dataset on the spatial distribution of the littoral habitats from Catalonia is valuable for coastal management and conservation to study changes in the habitat distribution and relate such changes to anthropogenic pressures. Furthermore, the CAT-LIT can be easily adapted to shores of other seas and oceans to obtain accurate

  12. A high-resolution GIS-based inventory of the west Siberian peat carbon pool

    Science.gov (United States)

    Sheng, Yongwei; Smith, Laurence C.; MacDonald, Glen M.; Kremenetski, Konstantine V.; Frey, Karen E.; Velichko, Andrei A.; Lee, Mary; Beilman, David W.; Dubinin, Peter

    2004-09-01

    The West Siberian Lowland (WSL) contains the world's most extensive peatlands and a substantial fraction of the global terrestrial carbon pool. Despite its recognition as a carbon reservoir of great significance, the extent, thickness, and carbon content of WSL peatlands have not been analyzed in detail. This paper compiles a wide array of data into a geographic information system (GIS) to create a high-resolution, spatially explicit digital inventory of all WSL peatlands and their associated physical properties. Detailed measurements for nearly 10,000 individual peatlands (patches) are based on compilation of previously unpublished Russian field and ancillary map data, satellite imagery, previously published depth measurements, and our own field depth and core measurements taken throughout the region during field campaigns in 1999, 2000, and 2001. At the patch level, carbon storage is estimated as the product of peatland area, depth, and carbon content. Estimates of peatland area are validated from RESURS-01 satellite images, and the quality of the Russian peatland depth and carbon content data is independently confirmed by laboratory analysis of core samples. Through GIS-based spatial analysis of the peat areal extent, depth, and carbon content data, we conservatively estimate the total area of WSL peatlands at 592,440 km2, the total peat mass at 147.82 Pg, and the total carbon pool at 70.21 Pg C. Our analysis concludes that WSL peatlands are more extensive and represent a substantially larger carbon pool than previously thought: Previous studies report 9,440-273,440 km2 less peatland area and 15.11-30.19 Pg less carbon than found in this analysis. The complete digital database is freely available for scientific use at http://arcss.colorado.edu/data/arcss131.html.

  13. Potential Coastal Pumped Hydroelectric Energy Storage Locations Identified using GIS-based Topographic Analysis

    Science.gov (United States)

    Parsons, R.; Barnhart, C. J.; Benson, S. M.

    2013-12-01

    Large-scale electrical energy storage could accommodate variable, weather dependent energy resources such as wind and solar. Pumped hydroelectric energy storage (PHS) and compressed energy storage area (CAES) have life cycle energy and financial costs that are an order of magnitude lower than conventional electrochemical storage technologies. However PHS and CAES storage technologies require specific geologic conditions. Conventional PHS requires an upper and lower reservoir separated by at least 100 m of head, but no more than 10 km in horizontal distance. Conventional PHS also impacts fresh water supplies, riparian ecosystems, and hydrologic environments. A PHS facility that uses the ocean as the lower reservoir benefits from a smaller footprint, minimal freshwater impact, and the potential to be located near off shore wind resources and population centers. Although technologically nascent, today one coastal PHS facility exists. The storage potential for coastal PHS is unknown. Can coastal PHS play a significant role in augmenting future power grids with a high faction of renewable energy supply? In this study we employ GIS-based topographic analysis to quantify the coastal PHS potential of several geographic locations, including California, Chile and Peru. We developed automated techniques that seek local topographic minima in 90 m spatial resolution shuttle radar topography mission (SRTM) digital elevation models (DEM) that satisfy the following criteria conducive to PHS: within 10 km from the sea; minimum elevation 150 m; maximum elevation 1000 m. Preliminary results suggest the global potential for coastal PHS could be very significant. For example, in northern Chile we have identified over 60 locations that satisfy the above criteria. Two of these locations could store over 10 million cubic meters of water or several GWh of energy. We plan to report a global database of candidate coastal PHS locations and to estimate their energy storage capacity.

  14. Comparison of Artificial Neural Networks and GIS Based Solar Analysis for Solar Potential Estimation

    Science.gov (United States)

    Konakoǧlu, Berkant; Usta, Ziya; Cömert, Çetin; Gökalp, Ertan

    2016-04-01

    Nowadays, estimation of solar potential plays an important role in planning process for sustainable cities. The use of solar panels, which produces electricity directly from the sun, has become popular in accordance with developing technologies. Since the use of solar panels enables the users to decrease costs and increase yields, the use of solar panels will be more popular in the future. Production of electricity is not convenient for all circumstances. Shading effects, massive clouds and rainy weather are some factors that directly affect the production of electricity from solar energy. Hence, before the installation of solar panels, it is crucial to conduct spatial analysis and estimate the solar potential of the place that the solar panel will be installed. There are several approaches to determine the solar potential. Examination of the applications in the literature reveals that the applications conducted for determining the solar potential are divided into two main categories. Solar potential is estimated either by using artificial neural network approach in which statistical parameters such as the duration of sun shine, number of clear days, solar radiation etc. are used, or by spatial analysis conducted in GIS approaches in which spatial parameters such as, latitude, longitude, slope, aspect etc. are used. In the literature, there are several studies that use both approaches but the literature lacks of a study related to the comparison of these approaches. In this study, Karadeniz Technical University campus has been selected as study area. Monthly average values of the number of clear sky days, air temperature, atmospheric pressure, relative humidity, sunshine duration and solar radiation parameters obtained for the years between 2005 and 2015 will be used to perform artificial neural network analysis to estimate the solar potential of the study area. The solar potential will also be estimated by using GIS-based solar analysis modules. The results of

  15. Assessing potential future environmental legal events

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B. [Oak Ridge National Lab., TN (United States); Petrich, C. [The Ernst and Yound Center for Business Innovation, Cambridge, MA (United States)

    1997-10-28

    This report addresses the topic of environmental citizenship in the United States. The term refers to responsibilities each of us have with respect to helping our communities and nation make sound environmental decisions. This research centers on the citizens and what we ought to be doing, as opposed to what the government ought to be doing for us, to improve environmental citizenship. This report examines four central questions: What are the requirements (i.e., responsibilities) of citizenship vis-a-vis environmental decision- making processes; what constraints limit people`s ability to meet these requirements; what does our form of governance do to help or hinder in meeting these requirements; and what recommendations can be put forth to improve public participation in environmental decision making?

  16. Environmental assessments under CEAA of WPPI wind farm projects

    Energy Technology Data Exchange (ETDEWEB)

    Lamirande, I. [Natural Resources Canada, Ottawa, ON (Canada)

    2005-07-01

    This paper presents an examination of issues concerning environmental assessments of Wind Power Production Incentive (WPPI) wind farms projects. The Canadian Environmental Assessment Act (CEAA) is the legal basis for the federal environmental assessment process for projects in which federal departments have a role. Key objectives of the CEAA are to ensure that projects receive careful consideration, do not cause significant adverse environmental effects and also allow for participation of the public. To date, CEAA triggers for wind farm projects include the WPPI financial incentive, the Fisheries Act Authorization and the Navigable Waters Protection Act. Types of environmental assessment include screening, comprehensive studies and panel reviews or mediation. Natural Resources Canada has developed guidelines specific to wind farms, with key environmental issues identified as aesthetics, noise, birds and bats, endangered species and sensitive habitats. Legislations considered to be important were the Species at Risk Act and the Migratory Birds Convention Act. Challenges were identified as a difficulty in harmonizing timelines between project schedules and environmental assessments, regional disparities, the fact that avifauna inventories are often incomplete or inadequate and the fact that assessments are often triggered late with regards to proper guidance to proponents for avifauna inventories. The paper concluded by suggesting that a balance between the promotion of wind energy and efficient environmental assessments was necessary, and that steps should be taken to assist with bird issues. Streamlining of the environmental assessment process and the development of a matrix were also suggested. tabs., figs.

  17. Environmental Groundwater Vulnerability Assessment in Urban Water Mines (Porto, NW Portugal

    Directory of Open Access Journals (Sweden)

    Maria José Afonso

    2016-11-01

    Full Text Available A multidisciplinary approach was developed to estimate urban groundwater vulnerability to contamination combining hydrogeology, hydrogeochemistry, subterranean hydrogeotechnics, groundwater ecotoxicology and isotope tracers. Paranhos and Salgueiros spring waters in Porto City were used as a case study. Historical and current vulnerability scenarios were compared using hydrogeological GIS-based modelling. Potential contamination sources were mapped around the spring galleries. Most of these were point sources and their potential contamination load was moderate. The ecotoxicological assessment indicated a low acute toxicity potential. Groundwater radionuclides appeared to be mainly controlled by geological factors and biomineralisation. Vulnerability maps suggest that most of the area has a moderate to low vulnerability to contamination. However, some surface sources such as sewage systems cause contamination and contribute to increased vulnerability. This integrated approach was demonstrated to be adequate for a better knowledge of urban hydrogeological processes and their dynamics, and highlighted the importance of a vulnerability assessment in urban areas.

  18. Holistic environmental assessment and offshore oil field exploration and production.

    Science.gov (United States)

    Salter, E; Ford, J

    2001-01-01

    According to UK Government surveys, concern for the environment is growing. Environmental regulation of the industry is becoming wider in its scope and tougher in its implementation. Various techniques are available to assess how the industry can drive down its environmental impact and comply with environmental regulation. Environmental Assessments (EA) required by European law do not cover the whole life cycle of the project that they are analysing. Life Cycle Analysis (LCA) was developed to assess the environmental loadings of a product, process or activity over its entire life cycle. It was the first technique used in environmental analysis that adopted what was described as a holistic approach. It fails this approach by not assessing accidental emissions or environmental impacts other than those that are direct. Cost Benefit Analysis (CBA) offers the opportunity to value environmental effects and appraise a project on the basis of costs and benefits. Not all environmental effects can be valued and of those that can there is considerable uncertainty in their valuation and occurrence. CBA cannot satisfactorily measure the total environmental risk of a project. Consequently there is a need for a technique that overcomes the failures of project-level EA, LCA and CBA, and assesses total environmental risk. Many organizations such as, the British Medical Association, the European Oilfield Speciality Chemicals Association, the Royal Ministry of Petroleum and Energy (Norway) and Shell Expro now recognize that a holistic approach is an integral part of assessing total risk. The Brent SPAR case study highlights the interdisciplinary nature required of any environmental analysis. Holistic Environmental Assessment is recommended as such an environmental analysis.

  19. Assessing environmental dependence using asset and income measures

    DEFF Research Database (Denmark)

    Charlery, Lindy Callen; Walelign, Solomon Zena

    2015-01-01

    Understanding rural environmental dependence in a rural population is an important factor in the framing of environmental policy with the dual aim of tackling poverty and conserving nature. Firstly, this study compares the assessment of environmental dependence between poverty groupings based on ...

  20. Assessing the wider environmental value of remediating land contamination

    NARCIS (Netherlands)

    Bardos, R.P.; Kearney, T.E.; Nathanail, C.P.; Weenk, A.; Martin, I.D.

    2000-01-01

    The aim of this paper is to consider qualitative and quantitative approaches for assessing the wider environmental value of remediating land contamination. In terms of the environmental element of sustainable development, a remediation project's overall environmental performance is the sum of the

  1. 10 CFR 51.31 - Determinations based on environmental assessment.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Determinations based on environmental assessment. 51.31 Section 51.31 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations...

  2. Environmental Assessment for Fuel Storage Tank Removal and Replacement

    Science.gov (United States)

    2004-10-23

    Protection of Children from Environmental Health Risks and Safety Risks...Income Populations); and EO 13045 (Protection of Children from Environmental Health Risks and Safety Risks). 1.8 Scope of the Environmental Assessment...pyrene, aluminum, arsenic, beryllium, iron, and thallium . Solid Waste Management Unit (SWMU) 72 SWMU 72 is an inactive coal ash disposal site located

  3. Methodology for Environmental Impact Assessment; Metodik foer miljoekonsekvensbedoemning

    Energy Technology Data Exchange (ETDEWEB)

    Malmlund, Anna (Structor Miljoebyraan Stockholm AB (Sweden))

    2010-12-15

    This report is an appendix to 'Environmental Impact Assessment Interim storage, encapsulation and disposal of spent nuclear fuel'. The appendix presents the methodology and criteria used in support investigations to conduct impact assessments.

  4. A statistical proposal for environmental impact assessment of development projects

    International Nuclear Information System (INIS)

    Plazas C, Julian A; De J Lema T, Alvaro; Leon P, Juan Diego

    2009-01-01

    Environmental impact assessment of development projects is a fundamental process, which main goal is to avoid that their construction and functioning, lead to serious and negative consequences on the environment. Some of the most important limitations of the models employed to assess environmental impacts, are the subjectivity of its parameters and weights, and the multicolineality among the variables, which represent high quantities of similar information. This work presents a multivariate statistical-based method that tries to diminish such limitations. For this purpose, environmental impact assessment, is valuated through different environmental impact attributes and environmental elements, synthesized in an environmental quality index (ICA in Spanish). ICA can be applied at different levels, such as at a project level, or applied only at a partial level on one or some environmental components.

  5. 76 FR 48119 - Oral Rabies Vaccine Trial; Availability of a Risk Assessment and an Environmental Assessment

    Science.gov (United States)

    2011-08-08

    ...] Oral Rabies Vaccine Trial; Availability of a Risk Assessment and an Environmental Assessment AGENCY... environmental assessment relative to an oral rabies vaccination field trial in West Virginia. The environmental... rabies vaccine, analyzes the use of that vaccine in field safety and efficacy trials in West Virginia...

  6. Assessing the Environmental Safety of Engineered Nanomaterials

    Science.gov (United States)

    Nanotechnology research in the United States is coordinated under the National Nano-technology Initiative with the goal of fostering development and implementation of nanomaterials and products that incorporate them and assuring that they are environmentally safe. The environmen...

  7. RISK ASSESSMENT AND MANAGEMENT OF ENVIRONMENTAL CADMIUM

    Science.gov (United States)

    Cadmium consumed in foods grown on soils contaminated by industrial Cd+Zn discharge has caused renal tubular dysfunction in exposed humans in discrete situations. However, lack of understanding about environmental Cd has caused wide concern that generalpopulations may...

  8. Predicting long-term average concentrations of traffic-related air pollutants using GIS-based information

    Science.gov (United States)

    Hochadel, Matthias; Heinrich, Joachim; Gehring, Ulrike; Morgenstern, Verena; Kuhlbusch, Thomas; Link, Elke; Wichmann, H.-Erich; Krämer, Ursula

    Global regression models were developed to estimate individual levels of long-term exposure to traffic-related air pollutants. The models are based on data of a one-year measurement programme including geographic data on traffic and population densities. This investigation is part of a cohort study on the impact of traffic-related air pollution on respiratory health, conducted at the westerly end of the Ruhr-area in North-Rhine Westphalia, Germany. Concentrations of NO 2, fine particle mass (PM 2.5) and filter absorbance of PM 2.5 as a marker for soot were measured at 40 sites spread throughout the study region. Fourteen-day samples were taken between March 2002 and March 2003 for each season and site. Annual average concentrations for the sites were determined after adjustment for temporal variation. Information on traffic counts in major roads, building densities and community population figures were collected in a geographical information system (GIS). This information was used to calculate different potential traffic-based predictors: (a) daily traffic flow and maximum traffic intensity of buffers with radii from 50 to 10 000 m and (b) distances to main roads and highways. NO 2 concentration and PM 2.5 absorbance were strongly correlated with the traffic-based variables. Linear regression prediction models, which involved predictors with radii of 50 to 1000 m, were developed for the Wesel region where most of the cohort members lived. They reached a model fit ( R2) of 0.81 and 0.65 for NO 2 and PM 2.5 absorbance, respectively. Regression models for the whole area required larger spatial scales and reached R2=0.90 and 0.82. Comparison of predicted values with NO 2 measurements at independent public monitoring stations showed a satisfactory association ( r=0.66). PM 2.5 concentration, however, was only slightly correlated and thus poorly predictable by traffic-based variables ( rGIS-based regression models offer a promising approach to assess individual levels of

  9. Spatial information in public consultation within environmental impact assessments

    NARCIS (Netherlands)

    Mwenda, A.N.

    2015-01-01

    Thesis Summary Spatial information in public consultation within Environmental Impact Assessments Angela N. Mwenda Established in the United States of America in 1970, Environmental Impact Assessment (EIA) is an interdisciplinary approach that considers the anticipated impacts of

  10. Spatial information in public consultation within environmental impact assessments

    NARCIS (Netherlands)

    Mwenda, A.N.

    2015-01-01

    Thesis Summary

    Spatial information in public consultation within Environmental Impact Assessments

    Angela N. Mwenda

    Established in the United States of America in 1970, Environmental Impact Assessment (EIA) is an interdisciplinary approach that

  11. Taking stock of environmental assessment: law, policy and practice

    National Research Council Canada - National Science Library

    McGillivray, Donald; Holder, Jane

    2007-01-01

    ... treatment of key issues in environmental assessment, in order to encourage an appreciation of where environmental assessment has come from and, perhaps most importantly, how it could develop in the future. This collection is a full 'stocktaking' exercise, encompassing a broad range of concerns, timescales and legal and policy contexts. It is both ...

  12. Environmental impact assessment in the Nordic Countries; Miljoekonsekvensbeskrivningar i Norden

    Energy Technology Data Exchange (ETDEWEB)

    Broden, K. [Studsvik RadWaste AB (Sweden); Palsson, S.E. [Geislavarnir rikisins (Iceland); Poroddsson, P. [Skipulagsstofnun (Iceland)

    2000-12-01

    A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

  13. 10 CFR 51.25 - Determination to prepare environmental impact statement or environmental assessment; eligibility...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Determination to prepare environmental impact statement or environmental assessment; eligibility for categorical exclusion. 51.25 Section 51.25 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY...

  14. 76 FR 10031 - Notice of Intent To Prepare an Environmental Assessment, Request for Comments on Environmental...

    Science.gov (United States)

    2011-02-23

    ... an Environmental Assessment (EA) that will analyze and discuss the environmental impacts of..., GSA will discuss impacts that could occur as a result of the construction and operation of the... scope of the EA, including the potential environmental impacts associated with the proposed action...

  15. Guidance on the environmental risk assessment of plant pests

    DEFF Research Database (Denmark)

    Baker, R.; Candresse, T.; Dormannsne Simon, E.

    2011-01-01

    the environmental risks of plant pests that have previously been used in pest risk assessment. The limitations identified by the review led the Panel to define the new methodology for environmental risk assessment which is described in this guidance document. The guidance is primarily addressed to the EFSA PLH......The European Food Safety Authority (EFSA) requested the Panel on Plant Health to develop a methodology for assessing the environmental risks posed by harmful organisms that may enter, establish and spread in the European Union. To do so, the Panel first reviewed the methods for assessing...

  16. 76 FR 26718 - Verdant Power, LLC; Notice of Availability of Environmental Assessment

    Science.gov (United States)

    2011-05-09

    .... Staff have prepared an environmental assessment (EA), which analyzes the potential environmental effects of licensing the project and concludes that licensing the project, with appropriate environmental..., LLC; Notice of Availability of Environmental Assessment In accordance with the National Environmental...

  17. MODELKEY. Models for assessing and forecasting the impact of environmental key pollutants on freshwater and marine ecosystems and biodiversity.

    Science.gov (United States)

    Brack, Werner; Bakker, Joop; de Deckere, Eric; Deerenberg, Charlotte; van Gils, Jos; Hein, Michaela; Jurajda, Pavel; Kooijman, Bas; Lamoree, Marja; Lek, Sovan; López de Alda, Maria Jose; Marcomini, Antonio; Muñoz, Isabel; Rattei, Silke; Segner, Helmut; Thomas, Kevin; von der Ohe, Peter Carsten; Westrich, Bernhard; de Zwart, Dick; Schmitt-Jansen, Mechthild

    2005-09-01

    Triggered by the requirement of Water Framework Directive for a good ecological status for European river systems till 2015 and by still existing lacks in tools for cause identification of insufficient ecological status MODELKEY (http:// www.modelkey.org), an Integrated Project with 26 partners from 14 European countries, was started in 2005. MODELKEY is the acronym for 'Models for assessing and forecasting the impact of environmental key pollutants on freshwater and marine ecosystems and biodiversity'. The project is funded by the European Commission within the Sixth Framework Programme. MODELKEY comprises a multidisciplinary approach aiming at developing interlinked tools for an enhanced understanding of cause-effect-relationships between insufficient ecological status and environmental pollution as causative factor and for the assessment and forecasting of the risks of key pollutants on fresh water and marine ecosystems at a river basin and adjacent marine environment scale. New modelling tools for risk assessment including generic exposure assessment models, mechanistic models of toxic effects in simplified food chains, integrated diagnostic effect models based on community patterns, predictive component effect models applying artificial neural networks and GIS-based analysis of integrated risk indexes will be developed and linked to a user-friendly decision support system for the prioritisation of risks, contamination sources and contaminated sites. Modelling will be closely interlinked with extensive laboratory and field investigations. Early warning strategies on the basis of sub-lethal effects in vitro and in vivo are provided and combined with fractionation and analytical tools for effect-directed analysis of key toxicants. Integrated assessment of exposure and effects on biofilms, invertebrate and fish communities linking chemical analysis in water, sediment and biota with in vitro, in vivo and community level effect analysis is designed to provide data

  18. Environmental Risk Assessment System for Phosphogypsum Tailing Dams

    Directory of Open Access Journals (Sweden)

    Xin Sun

    2013-01-01

    Full Text Available This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP and fuzzy logic, were used to handle the complexity of the environmental and nonquantitative data. Using our assessment method, different risk factors can be ranked according to their contributions to the environmental risk, thereby allowing the calculation of their relative priorities during decision making. Thus, environmental decision-makers can use this approach to develop alternative management strategies for proposed, ongoing, and completed PG tailing dams.

  19. Environmental risk assessment system for phosphogypsum tailing dams.

    Science.gov (United States)

    Sun, Xin; Ning, Ping; Tang, Xiaolong; Yi, Honghong; Li, Kai; Zhou, Lianbi; Xu, Xianmang

    2013-01-01

    This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the complexity of the environmental and nonquantitative data. Using our assessment method, different risk factors can be ranked according to their contributions to the environmental risk, thereby allowing the calculation of their relative priorities during decision making. Thus, environmental decision-makers can use this approach to develop alternative management strategies for proposed, ongoing, and completed PG tailing dams.

  20. A new Gis-based map of villa Adriana, a multimedia guide for ancient paths

    Directory of Open Access Journals (Sweden)

    M. Canciani

    2014-06-01

    Full Text Available For the last fifteen years the Faculty of Architecture at the University of Roma Tre, has been working on the famous Villa Adriana in Tivoli, studying its ruins and its ancient paths, in order to better understand how the villa was originally laid out. In this paper, we will talk about one of these studies, which reconnect previous works and creates a new GIS based map of Villa Adriana. The goal of this study is to create a cultural heritage evaluation. In order to achieve this aim, we have created a multimedia guide with text, drawings, 3D reconstructions and augmented reality. This work can be summarized in five steps; first of all, a new georeferenced plan was created. This drawing is based on an orthophoto and brings together all existing surveys (from historical drawings to recent surveys. In this new work we show the current status of the ruins and the original layout of Villa Adriana according to the most recent study. The second step was a 3D survey, with extensive use of photogrammetry to verify and upgrade drawings. The next and third step involved creating the Database, within which to store, edit, analyze, share, and display linked data relating to both ancient and contemporary buildings and pathways. This GIS is based on the new plan and gathers together different orders of information: original function, paving, the old paths of each original user (Hadrian, his wife Sabina, the retinue, guests and servants as well as the ancient system of underground tunnels. It collects all the existing data relating to Villa Adriana relevant to solving the "what/where" question. The fourth step was to create a complete 3D model of Villa Adriana. The 3D reconstruction started from the existing surveys, the documentation of recent excavation and the input of the hypothetical reconstruction of lost or buried buildings. Finally we created a multimedia guide, based on a mobile app, which took information from the database to show, in real time, during

  1. A GIS Based 3D Online Decision Assistance System for Underground Energy Storage in Northern Germany

    Science.gov (United States)

    Nolde, M.; Schwanebeck, M.; Biniyaz, E.; Duttmann, R.

    2014-12-01

    We would like to present a GIS-based 3D online decision assistance system for underground energy storage. Its aim is to support the local land use planning authorities through pre-selection of possible sites for thermal, electrical and substantial underground energy storages. Since the extension of renewable energies has become legal requirement in Germany, the underground storing of superfluously produced green energy (such as during a heavy wind event) in the form of compressed air, gas or heated water has become increasingly important. However, the selection of suitable sites is a complex task. The assistance system uses data of geological features such as rock layers, salt caverns and faults enriched with attribute data such as rock porosity and permeability. This information is combined with surface data of the existing energy infrastructure, such as locations of wind and biogas stations, power line arrangement and cable capacity, and energy distribution stations. Furthermore, legal obligations such as protected areas on the surface and current underground mining permissions are used for the decision finding process. Not only the current situation but also prospective scenarios, such as expected growth in produced amount of energy are incorporated in the system. The decision process is carried out via the 'Analytic Hierarchy Process' (AHP) methodology of the 'Multi Object Decision Making' (MODM) approach. While the process itself is completely automated, the user has full control of the weighting of the different factors via the web interface. The system is implemented as an online 3D server GIS environment, with no software needed to be installed on the user side. The results are visualized as interactive 3d graphics. The implementation of the assistance system is based exclusively on free and open source software, and utilizes the 'Python' programming language in combination with current web technologies, such as 'HTML5', 'CSS3' and 'JavaScript'. It is

  2. 49 CFR 260.35 - Environmental assessment.

    Science.gov (United States)

    2010-10-01

    ... Associate Administrator for Railroad Development at the earliest possible stage in project development in... Zone Management Act (16 U.S.C. 1451), and the Endangered Species Act (16 U.S.C. 1531). Appropriate... environmental impact of the project for which the applicant is seeking financial assistance, FRA will need to...

  3. Environmental risk assessment of hydrofluoropolyethers (HFPEs)

    International Nuclear Information System (INIS)

    Tsai, W.-T.

    2007-01-01

    Hydrofluoropolyethers (HFPEs), a new family of linear oligomeric fluorinated fluids, are being used as potential replacements for halon, hydrochlorofluorocarbons (HCFCs) and perfluorocarbons (PFCs) that have been listed as ozone depleting substances and/or greenhouse gases. Because of their physicochemical properties, these substances may be industrially used as cleaning solvents in the electronic components, fire suppression agents in the fire protection, and heat transfer fluids in the heat exchangers. From the environmental, ecological, and healthy points of view, it is urgent to understand their environmental risks of these HFPEs. This article aimed at introducing these HFPEs in physiochemical properties and potential uses, and evaluating their environmental risks (i.e., global warming, photochemical potential, and environmental partition). Further, the updated data on their toxicological profiles and potential exposure hazards from their degradation products were also addressed in this paper. It is indicated that HFPEs still pose some significant hazards, especially global warming and photochemical potentials, to the atmosphere. Regarding the estimation of partition properties (i.e., vapor pressure, octanol-water partition coefficient and bioconcentration) of HFPEs, the predicted values of log K ow for several HFPEs were found to be below zero, suggesting that they should possess very low potential for bioaccumulation in the environment

  4. Applicable international environmental impact assessment laws for ...

    African Journals Online (AJOL)

    Lawrence Hart

    1971-05-28

    May 28, 1971 ... the relationship between environmental degradation/pollution and project developments. ... part of Nigeria and with the south by the Atlantic Ocean ..... pollution. UNO. 10. Convention for Cooperation in the Petroleum and. Development of the Marine and Coast. Environments of West and Central Africa.

  5. Environmental impact assessment: theory and practice

    National Research Council Canada - National Science Library

    Wathern, Peter

    1988-01-01

    ... projects. Enshrined in legislation in the USA, Canada, Australia, the Netherlands, Japan and, latterly, in the European Community, EIA is an integral part of environmental management. The 'science' and 'art' of EIA are inextricably linked, but the distinction between them is useful and is reflected in the organization of the book. An introductory chapter p...

  6. Retrospective examination of geothermal environmental assessments

    Energy Technology Data Exchange (ETDEWEB)

    Webb, J.W.; Eddlemon, G.K.; Reed, A.W.

    1984-03-01

    Since 1976, the Department of Energy (DOE) has supported a variety of programs and projects dealing with the exploration, development, and utilization of geothermal energy. This report presents an overview of the environmental impacts associated with these efforts. Impacts that were predicted in the environmental analyses prepared for the programs and projects are reviewed and summarized, along with measures that were recommended to mitigate these impacts. Also, for those projects that have gone forward, actual impacts and implemented mitigation measures are reported, based on telephone interviews with DOE and project personnel. An accident involving spills of geothermal fluids was the major environmental concern associated with geothermal development. Other important considerations included noise from drilling and production, emissions of H/sub 2/S and cooling tower drift, disposal of solid waste (e.g., from H/sub 2/S control), and the cumulative effects of geothermal development on land use and ecosystems. Mitigation measures were frequently recommended and implemented in conjunction with noise reduction; drift elimination; reduction of fugitive dust, erosion, and sedimentation; blowout prevention; and retention of wastes and spills. Monitoring to resolve uncertainties was often implemented to detect induced seismicity and subsidence, noise, drift deposition, concentrations of air and water pollutants, and effects on groundwater. The document contains an appendix, based on these findings, which outlines major environmental concerns, mitigation measures, and monitoring requirements associated with geothermal energy. Sources of information on various potential impacts are also listed.

  7. PRINCIPLES OF ENVIRONMENTAL ASSESSMENT IN THE LIFECYCLE OF PRODUCTS

    Directory of Open Access Journals (Sweden)

    Joanna Kulczycka

    2017-02-01

    Full Text Available One of the aims of the European Commission (EC activities is to introduce uniform rules for the environmental performance assessment based on the life cycle assessment method (LCA, which can be widely used e.g. in eco-labeling, assessment of goods, services, technology, etc. Therefore, from 1 November 2013 the European Commission implemented a pilot phase of the project on developing common methods for measuring the environmental performance of the product and organisation, aims to develop guidance documents in this field. The pilot phase includes development of the Category Rules relating to the calculation, verification and communication for environmental footprint of the 25 categories of products and two organizations. Therefore, the article presents the principle of environmental performance based on life cycle assessment in relation to the objectives of the proposed methodology of environmental footprint.

  8. Environmental Safety and Health Analytical Laboratory, Pantex Plant, Amarillo, Texas. Final Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) of the construction and operation of an Environmental Safety and Health (ES&H) Analytical Laboratory and subsequent demolition of the existing Analytical Chemistry Laboratory building at Pantex Plant near Amarillo, Texas. In accordance with the Council on Environmental Quality requirements contained in 40 CFR 1500--1508.9, the Environmental Assessment examined the environmental impacts of the Proposed Action and discussed potential alternatives. Based on the analysis of impacts in the EA, conducting the proposed action, construction of an analytical laboratory and demolition of the existing facility, would not significantly effect the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA) and the Council on Environmental Quality regulations in 40 CFR 1508.18 and 1508.27.

  9. Environmental Safety and Health Analytical Laboratory, Pantex Plant, Amarillo, Texas. Final Environmental Assessment

    International Nuclear Information System (INIS)

    1995-06-01

    The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) of the construction and operation of an Environmental Safety and Health (ES ampersand H) Analytical Laboratory and subsequent demolition of the existing Analytical Chemistry Laboratory building at Pantex Plant near Amarillo, Texas. In accordance with the Council on Environmental Quality requirements contained in 40 CFR 1500--1508.9, the Environmental Assessment examined the environmental impacts of the Proposed Action and discussed potential alternatives. Based on the analysis of impacts in the EA, conducting the proposed action, construction of an analytical laboratory and demolition of the existing facility, would not significantly effect the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA) and the Council on Environmental Quality regulations in 40 CFR 1508.18 and 1508.27

  10. How strategic environmental assessment can inform lenders about potential environmental risks

    DEFF Research Database (Denmark)

    Banhalmi-Zakar, Zsuzsa; Larsen, Sanne Vammen

    2015-01-01

    In this paper, we explore the potential for strategic environmental assessment (SEA) to be a useful tool for banks to manage environmental risks and inform lending decisions. SEA is an environmental assessment tool that was developed to assist strategic-level decision-makers, such as policy......-makers, planners, government authorities and environmental practitioners in improving developmental outcomes, aiming to facilitate the transition to sustainable development. We propose that SEA may also be a valuable tool for banks because it has the capacity to provide information about environmental risks...... at a time when it can be used as an input to bank lending decisions, which can assist banks in making lending decisions with better environmental outcomes. For these reasons, we argue that in some circumstances, and particularly for project finance transactions, SEA may be a more useful environmental...

  11. Environmental economic impact assessment in China: Problems and prospects

    International Nuclear Information System (INIS)

    Lindhjem, Henrik; Hu Tao; Ma Zhong; Skjelvik, John Magne; Song Guojun; Vennemo, Haakon; Wu Jian; Zhang Shiqiu

    2007-01-01

    The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline

  12. Tiering strategic environmental assessment and project environmental impact assessment in highway planning in Sao Paulo, Brazil

    International Nuclear Information System (INIS)

    Sanchez, Luis E.; Silva-Sanchez, Solange S.

    2008-01-01

    Constructing highways in dense urban areas is always a challenge. In Sao Paulo Metropolitan Region, heavy truck traffic contributes to clog streets and expressways alike. As part of the traffic neither originates nor head to the region, a peripheral highway has been proposed to reduce traffic problems. This project, called Rodoanel, is an expressway approximately 175 km long. The fact that the projected south and north sections would cross catchments that supply most of the metropolis water demand was strongly disputed and made the environmental permitting process particularly difficult. The agency in charge commissioned a strategic environmental assessment (SEA) of a revamped project, and called it the Rodoanel Programme. However, the SEA report failed to satisfactorily take account of significant strategic issues. Among these, the highway potential effect of inducing urban sprawl over water protection zones is the most critical issue, as it emerged later as a hurdle to project licensing. Conclusion is that, particularly where no agreed-upon framework for SEA exists, when vertical tiering with downstream project EIA is sought, then a careful scoping of strategic issues is more than necessary. If an agreement on 'what is strategic' is not reached and not recognized by influential stakeholders, then the unsettled conflicts will be transferred to project EIA. In such a context, SEA will have added another loop to the usually long road to project approval

  13. Environmental Screening Assessment of Perchlorate Replacements

    Science.gov (United States)

    2007-08-01

    macroinvertebrates (Table 12). Based on the toxicity values predicted by EPI Suite for the Daphnia species (i.e., LD50 and Lowest Observed Effect Concentrations...tetranitro-1,3,5,7-tetrazocine Koc Organic carbon soil sorption coefficient Kow Octanol water partitioning coefficient LOEC Lowest observed effect ...mobility, persistence, and potential toxicity issues related to perchlorate have high- lighted the importance of trying to anticipate the environmental

  14. Environmental Compliance Assessment Army Reserve (ECAAR)

    Science.gov (United States)

    1993-09-01

    Comprehensive Planning BEE Bioenvironmental Engineer BOD Biological Oxygen Demand CAA Clean Air Act CELDS Computer-Aided Environmental Legislative Data System...Diquat, Endrin, Endothall, Glyphosate , Hexachlorobenzene, Hexachlorocyclopentadiene, Oxamyl (Vydate), Picloram, Simazine, 2,3,7,8,-TCDD (Dioxin), Antimony...reportable 40 CFR 302.4 in Appendix 7-1 have bee reported. (IX2) quantities of hazardous substances shall be Verify that a procedure is in place for

  15. Environmental Assessment of a Central Heating Plant.

    Science.gov (United States)

    1983-02-01

    boulder to sand size . The unit is known to be at least 150 feet thick at K. I. Sawyer AFR (Ref. 28,30). The lithologv of the unconsoli- dated materials ...one zeolite unit, a 4000 gallon heated water storage tank, feedwater heater , phosphate and sulfite feed units, and two make-up feedwater pumps, would... determine whether an Environmental Impact Statement is required. DD , 1473 EDITION OF I NOV 65 IS OSOLETiE UNCLASSIFIED SECURITY CLASSIFICATION OF THIS

  16. Environmental Assessment of Products, Volume 2

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Wenzel, Henrik

    Reviews the scientific background for the impact assessment phase of the EDIP methodology for life cycle assessment (LCA) covering the impact categories: Global warming, stratospheric ozone depletion, photochemical ozone formation, acidification, nutrient enrichment, ecotoxicity, human toxicity......, working environment and resource consumption. Also features background documentation of the valuation step and of the allocation principles adopted in the EDIP methodology....

  17. Environmental income improves household-level poverty assessments and dynamics

    DEFF Research Database (Denmark)

    Walelign, Solomon Zena; Charlery, Lindy Callen; Smith-Hall, Carsten

    2016-01-01

    Household-level poverty assessments and analyses of poverty dynamics in developing countries typically do not include environmental income. Using household (n = 427 in 2006, 2009 and 2012) total income panel data sets, with and without environmental income, from Nepal, we analysed the importance...... of environmental income in household-level poverty assessments (Foster-Greer-Thorbecke indices) and dynamics (movements in the Poverty Transition Matrix). Random effects logit and ordered logit models were applied to estimate variables covarying with poverty categories and compared for annual household incomes...... with and without environmental income. Using the without environmental income data set significantly changed the number of households classified as poor, as well as rates of movements in and out of poverty. Excluding household-level environmental income also distorted estimation of covariates of poverty incidence...

  18. Environmental assessment of solid waste systems and technologies: EASEWASTE

    DEFF Research Database (Denmark)

    Kirkeby, Janus Torsten; Birgisdottir, Harpa; Hansen, Trine Lund

    2006-01-01

    A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able...... may not always be the most environmentally friendly. The EASEWASTE model can identify the most environmentally sustainable solution, which may differ among waste materials and regions and can add valuable information about environmental achievements from each process in a solid waste management system....... to optimize current waste management systems with respect to environmental achievements and by authorities to Set Guidelines and regulations and to evaluate different strategies for handling of waste. The waste hierarchy has for decades been governing waste management but the ranking of handling approaches...

  19. Estimating the GIS-based soil loss and sediment delivery ratio to the sea for four major basins in South Korea.

    Science.gov (United States)

    Lee, S E; Kang, S H

    2013-01-01

    This paper describes a sediment delivery ratio (SDR) using the Geographic Information System (GIS)-based Revised Universal Soil Loss Equation (RUSLE), to calculate the soil loss and sediment rating curve (SRC) basis of measured data in the six basins of Four Rivers, South Korea. The data set for calculating SDR was prepared during 3 years from 2008 to 2010. Mean soil loss in the six basins of Four Rivers was 515-869 t km(-2) yr(-1) and mean specific sediment yield (SSY) was 20-208 t km(-2) yr(-1) with basin size. The SDR ranged from 0.03 to 0.33 in the six rivers. Most sediment flows in the monsoon period from June to September (mean Max.: >97%; mean Min.: >84%), but SDR is lower than those of similar continental river basins. This is due to environmental factors, for example rainfall characteristics and associated run-off, soil characteristics and cultivated patterns with increasing basin size. This research provides the first application of SDR based on the observed field data in South Korea.

  20. The Role of Environmental Impact Assessment to Compensatory Measures Adoption

    OpenAIRE

    Livia Cristina Pinheiro Lopes; José Claudio Junqueira Ribeiro

    2016-01-01

    This article aims to analyze the relationship between Environmental Impact Assessment - EIA, and Countervailing Measures that have been adopted in the environmental licensing. Through methodological critical analysis of legislation and adoption of compensatory measures for environmental licensing, it was identified imperfections, since, often, there is no link between the adopted compensatory measures and impacts verified in the EIA. Besides the compensatory measures arising from legal provis...

  1. Environmental assessment report on proposed Yeelirrie uranium project

    International Nuclear Information System (INIS)

    1979-01-01

    In accordance with Government requirements, Western Mining Corporation Ltd. has prepared a Draft Environmental Impact Statement/Environmental Review and Management Programme for its proposed uranium mine development at Yeelirrie, Western Australia. This report includes an outline of the proposal, an enviromental assessment, recommendations by the Environmental Protection Authority made after consideration of the Company's draft statement and a review of public and State Government Departmental Submissions received on the Yeelirrie EIS/ERMP

  2. Environmental impact assessment of rail infrastructure.

    Science.gov (United States)

    2016-01-29

    This project resulted in three products: a comprehensive "Sustainable Rail Checklist," a rail planning GIS database, and a web GIS tool that integrates sustainability metrics and facilitates a rapid assessment before a formal NEPA process is implemen...

  3. Environmental Monitoring, Water Quality - Lakes Assessments - Attaining

    Data.gov (United States)

    NSGIC Education | GIS Inventory — This layer shows only attaining lakes of the Integrated List. The Lakes Integrated List represents lake assessments in an integrated format for the Clean Water Act...

  4. Environmental impact assessment applied to planning activities

    International Nuclear Information System (INIS)

    Vismara, R.

    1994-01-01

    Object of EEC (European Economic Community) directive and italian law are certain public and private projects. However, more recent tendency are moving to an application on planning action too. There is no doubt that EIA (Environmental Impact Analysis) on project is very different than EIA on plans. Obviously EIA on a sectorial plan is not an addition of singular EIA on project. The new main objectives shall be: identification of critical areas; identification of interaction between different projects and between different factors; identification of critical project. A methodology to quantify these objectives in matricial form is presented

  5. An Assessment of Environmental Health Needs for Manned Spacecraft

    Science.gov (United States)

    Macatangay, Ariel V.

    2013-01-01

    Environmental health fundamentally addresses the physical, chemical, and biological risks external to the human body that can impact the health of a person by assessing and controlling these risks in order to generate and maintain a health-supportive environment. Environmental monitoring coupled with other measures including active and passive controls and the implementation of environmental standards (SMACs, SWEGs, microbial and acoustics limits) are used to ensure environmental health in manned spacecraft. NASA scientists and engineers consider environmental monitoring a vital component to an environmental health management strategy for maintaining a healthy crew and achieving mission success. Environmental monitoring data confirms the health of ECLS systems, in addition to contributing to the management of the health of human systems. Crew health risks associated with the environment were reviewed by agency experts with the goal of determining risk-based environmental monitoring needs for future NASA manned missions. Once determined, gaps in knowledge and technology, required to address those risks, were identified for various types of Exploration missions. This agency-wide assessment of environmental health needs will help guide the activities/hardware development efforts to close those gaps and advance the knowledge required to meet NASA manned space exploration objectives. Details of this assessment and findings are presented in this paper.

  6. Review of Chinese Environmental Risk Assessment Regulations and Case Studies

    Science.gov (United States)

    Meng, Xiaojie; Zhang, Yan; Zhao, Yuchao; Lou, In Chio; Gao, Jixi

    2012-01-01

    Environmental risk assessment is an essential step in the development of solutions for pollution problems and new environmental regulations. An assessment system for environmental risks has been developed in China in recent decades. However, many of the Chinese technical guidelines, standards, and regulations were directly adapted from those of developed countries, and were not based on the Chinese environmental and socioeconomic context. Although existing environmental regulations for pollutants are usually obtained by extrapolations from high-dose toxicological data to low-dose scenarios using linear-non-threshold (LNT) models, toxicologists have argued that J-shaped or inverse J-shaped curves may dominate the dose–response relationships for environmental pollutants at low doses because low exposures stimulate biological protective mechanisms that are ineffective at higher doses. The costs of regulations based on LNT and J-shaped models could therefore be dramatically different. Since economic factors strongly affect the decision-making process, particularly for developing countries, it is time to strengthen basic research to provide more scientific support for Chinese environmental regulations. In this paper, we summarize current Chinese environmental policies and standards and the application of environmental risk assessment in China, and recommend a more scientific approach to the development of Chinese regulations. PMID:22740787

  7. Draft environmental assessment: Ocean Thermal Energy Conversion (OTEC) Pilot Plants

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, S.M.; Sands, M.D.; Donat, J.R.; Jepsen, P.; Smookler, M.; Villa, J.F.

    1981-02-01

    This Environmental Assessment (EA) has been prepared, in accordance with the National Environmental Policy Act of 1969, for the deployment and operation of a commercial 40-Megawatt (MW) Ocean Thermal Energy Conversion (OTEC) Pilot Plant (hereafter called the Pilot Plant). A description of the proposed action is presented, and a generic environment typical of the candidate Pilot Plant siting regions is described. An assessment of the potential environmental impacts associated with the proposed action is given, and the risk of credible accidents and mitigating measures to reduce these risks are considered. The Federal and State plans and policies the proposed action will encompass are described. Alternatives to the proposed action are presented. Appendix A presents the navigation and environmental information contained in the US Coast Pilot for each of the candidate sites; Appendix B provides a brief description of the methods and calculations used in the EA. It is concluded that environmental disturbances associated with Pilot Plant activities could potentially cause significant environmental impacts; however, the magnitude of these potential impacts cannot presently be assessed, due to insufficient engineering and environmental information. A site- and design-specific OTEC Pilot Plant Environmental Impact Statement (EIS) is required to resolve the potentially significant environmental effects associated with Pilot Plant deployment and operation. (WHK)

  8. Overview of Environmental Impact Assessment of Oil and Gas ...

    African Journals Online (AJOL)

    The environmental impact assessment (EIA) of oil and gas projects in Nigeria and the process of delivering it was examined with oil and gas projects. ... which the Environmental Management Plan (EMP) is obtained to give guide on the appropriate means of managing the environment during the various project activities.

  9. Fish bioaccumulation and biomarkers in environmental risk assessment : a review

    NARCIS (Netherlands)

    van der Oost, Ron; Beyer, Jonny; Vermeulen, Nico P E

    In this review, a wide array of bioaccumulation markers and biomarkers, used to demonstrate exposure to and effects of environmental contaminants, has been discussed in relation to their feasibility in environmental risk assessment (ERA). Fish bioaccumulation markers may be applied in order to

  10. Land Grant Colleges and Mechanization: A Need for Environmental Assessment.

    Science.gov (United States)

    Catz, Robert S.

    1979-01-01

    It is suggested that the National Environmental Policy Act of 1969 applies to agricultural research and development projects receiving federal monies through the land grant college system, and that the Department of Agriculture has neglected its statutory duty to assess long-term environmental impact of agricultural mechanization. (Author/MSE)

  11. Geospatial Technology In Environmental Impact Assessments – Retrospective.

    Directory of Open Access Journals (Sweden)

    Goparaju Laxmi

    2015-10-01

    Full Text Available Environmental Impact Assessments are studies conducted to give us an insight into the various impacts caused by an upcoming industry or any developmental activity. It should address various social, economic and environmental issues ensuring that negative impacts are mitigated. In this context, geospatial technology has been used widely in recent times.

  12. Assessing environmental impacts of inland sand mining in parts of ...

    African Journals Online (AJOL)

    Sand is a valuable resource for construction and other purposes, however sand mining often result in serious environmental problems such as land degradation, loss of agricultural lands and biodiversity, as well increased poverty among people. This study assessed the environmental impacts of inland sand mining in six ...

  13. Harmonia axyridis: an environmental risk assessment for Northwest Europe

    NARCIS (Netherlands)

    Lenteren, van J.C.; Loomans, A.J.M.; Babendreier, D.; Bigler, F.

    2008-01-01

    In this paper, we summarize the international situation with respect to environmental risk assessment for biological control agents. Next, we apply a recently designed, comprehensive risk evaluation method consisting of a stepwise procedure to evaluate the environmental risks of Harmonia axyridis in

  14. 78 FR 41056 - Notice of Availability of Environmental Assessment

    Science.gov (United States)

    2013-07-09

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Notice of Availability of Environmental Assessment BOST5 Hydroelectric LLC Project No. 12758-004 BOST4 Hydroelectric LLC Project No. 12757-004 BOST3 Hydroelectric LLC Project No. 12756-003 In accordance with the National Environmental Policy Act of 1969 and the...

  15. Environmental assessment of electrochromic glazing production

    International Nuclear Information System (INIS)

    Syrrakou, E.; Papaefthimiou, S.; Yianoulis, P.

    2005-01-01

    The life cycle analysis method was used to determine the environmental impacts associated with the production of an electrochromic (EC) glazing (called ECD). This paper describes the inventory analysis for all the basic materials used during the manufacture of the ECD, i.e. K-Glass, tungsten oxide (WO 3 ), poly-methyl methacrylate (PMMA), propylene carbonate (PC), lithium perchlorate (LiClO 4 ) and acetic silicone sealant. K-Glass, PC and PMMA account for the 98% of the total device mass and the CO 2 emissions during their production processes are 810 g. The total embodied energy was estimated to be 49 MJ/ECD, with 32.1 MJ/unit of them derived from the K-Glass. The comparison of the total embodied energies of the ECD and various insulating glass units concluded that mass-produced EC glazings could easily compete with them in terms of environmental performance, anticipating cost attenuation and overall thermal and optical behavior. The above analysis could be implemented for the reduction of the embodied energy of the ECD life cycle, since it is proposed as an energy saving device. (Author)

  16. A GIS based district information system for water resources management and planning

    Science.gov (United States)

    Tzabiras, John; Spiliotopoulos, Marios; Kokkinos, Kostantinos; Fafoutis, Chrysostomos; Sidiropoulos, Pantelis; Vasiliades, Lampros; Loukas, Athanasios; Mylopoulos, Nikitas

    2014-05-01

    In many watersheds of the Mediterranean Countries, water resources are presently fully or overcommitted. Irrigators are the largest consumers of fresh water in Mediterranean Countries using up to 80% of all allocated water in some regions. Administrative efforts should be directed towards an integrated policy of water allocation which accounts for the characteristics and specificity of each farm, requiring the availability of data bases and management tools (decision support systems) specifically designed to fulfil the objectives of maximizing water use efficiency. The overall objective of this program was the development of a District Information System (DIS) which could be used by stakeholders at purposes of irrigation district day-to-day management as well as for planning and strategic decision-making. The DIS was developed from a GIS-based modelling approach which integrates a generic crop model, a hydraulic module for the water transfer/distribution system and uses remote sensing information. The main sub-objectives were: (i) the development of an operational algorithm to retrieve crop evapotranspiration from remote sensing data, (ii) the development of an information system with friendly user interface for the data base, the crop module and the hydraulic module and (iii) the analysis and validation of management scenarios from model simulations predicting the respective behaviour. Surface Energy Balance Algorithm for Land (SEBAL) was used to derive monthly actual evapotranspiration (ET) values from Landsat TM imagery. Meteorological data from the archive of the Institute for Research and Technology, Thessaly (I.RE.TE.TH) have also been used. The methodology was developed using high quality Landsat TM images during 2007 growing season. Monthly ET values are then used as an input to CROPWAT model. Outputs of CROPWAT model are then used as input for the hydraylic module consisted of TECHNOLOGISMIKI, WATERCAD and WEAP model. Hence, a reference scenario was

  17. The environmental impact assessment of uranium mining in Australia

    International Nuclear Information System (INIS)

    Morvell, G.

    2002-01-01

    Federal environmental impact assessment legislation has existed in Australia since 1974. A number of uranium mines have been developed in this time, utilizing a range of mining techniques, including opencut, underground and in-situ leach. Projects have also been undertaken in a variety of geographical areas requiring consideration of diverse biodiversity, cultural heritage and social impact issues. Assessment of uranium mining proposals in Australia is also conducted in a climate of political opposition from a cross section of the Australian community. This paper outlines some of the key issues that arose during recent assessments and which provide a lead to the role of environmental impact assessment in environmental policy development. Issues are also relevant to recent assessments on a replacement nuclear reactor, shipments of waste for reprocessing and proposed assessments on proposals for low and intermediate level nuclear waste facilities. (author)

  18. Environmental life cycle assessment of water supply in South Africa ...

    African Journals Online (AJOL)

    , which is increasingly used for decision-support in the South African manufacturing industry, e.g. for cleaner production purposes. The life cycle impact assessment (LCIA) phase of LCAs evaluates the potential environmental impact profiles of ...

  19. Proposing an Environmental Excellence Self-Assessment Model

    DEFF Research Database (Denmark)

    Meulengracht Jensen, Peter; Johansen, John; Wæhrens, Brian Vejrum

    2013-01-01

    This paper presents an Environmental Excellence Self-Assessment (EEA) model based on the structure of the European Foundation of Quality Management Business Excellence Framework. Four theoretical scenarios for deploying the model are presented as well as managerial implications, suggesting...

  20. Environmental Assessment Seafarers Training Center, Kalaeloa, Oahu, Hawaii

    National Research Council Canada - National Science Library

    2003-01-01

    The Department of the Navy has prepared an Environmental Assessment for the establishment and operation of a Seafarers Training Center within the Hawaii Army National Guard's Kalaeloa Installation, Oahu, Hawaii...

  1. Setting boundaries of participation in environmental impact assessment

    International Nuclear Information System (INIS)

    Salomons, Geoffrey H.; Hoberg, George

    2014-01-01

    Public participation processes are touted as an effective way to increase the capacity and legitimacy of environmental assessment and the regulatory process that rely on them. Recent changes to the Canadian environmental assessment process narrowed the criteria for who can participate in environmental assessments from any who were interested to those who were most directly affected. This article examines the potential consequences of this change by exploring other areas of Canadian regulatory law where a similar directed affected test has been applied. This new standard risks institutionalizing the long-understood representational bias confronted by more diffuse interest like environmental protection. Restricting participation to the “directly affected” is far too narrow a test for processes like environmental assessment that are designed to determine the public interest. -- Highlights: • Public participation can improve the legitimacy of environmental assessments. • New Canadian rules narrow the range of eligible participants. • Similar rules in Alberta have excluded environmental representation. • The new rules may institutionalize bias against more diffuse interests. • Restricting participation to the “directly affected” is far too narrow

  2. Environmental noise and infrasound assessment : best practices

    International Nuclear Information System (INIS)

    Howe, B.; McCabe, N.

    2007-01-01

    Sound levels near wind turbine generators were characterized in this study, which encompassed sound production and propagation. A review of sound level assessment criteria for wind turbines was included. A best practice guide emphasized the importance of good public relations and community involvement. Best practices also take into consideration planning and approval requirements. It was recommended that proponents of wind projects should communicate honestly with the public and dispel rumours; avoid arbitrary setback distances and assess these on a project by project basis; provide a technical assessment based on solid engineering practices; base the evaluation on measured ambient sound levels; base the evaluation on accurate sound power levels from manufacturers; base the evaluation on an accepted acoustic propagation model; and, choose proper criteria for urban or rural settings. figs

  3. Spatial information in public consultation within environmental impact assessments

    OpenAIRE

    Mwenda, A.N.

    2015-01-01

    Thesis Summary Spatial information in public consultation within Environmental Impact Assessments Angela N. Mwenda Established in the United States of America in 1970, Environmental Impact Assessment (EIA) is an interdisciplinary approach that considers the anticipated impacts of development on the environment, and proposes timely mitigation of these impacts to the extent possible. Since then, EIA has continued to be established in countries worldwide, with modifications being made to suit re...

  4. Ecological geology environmental assessment of open-pit mines

    International Nuclear Information System (INIS)

    Dong Shuangfa; Jiang Xue

    2010-01-01

    In this paper, there is a detail description of ecological geology environmental assessment of open-pit mines, including method, process and results. We took ecological geology environmental assessment work on the base of the results of some open-pit mines such as extremely low content magnetite in Hebei Province, inducted and summarized the ecological geology environment quality. The results are reasonable. It provides basic data for the second mines programming in Hebei Province. (authors)

  5. A rainfall risk analysis thanks to an GIS based estimation of urban vulnerability

    Science.gov (United States)

    Renard, Florent; Pierre-Marie, Chapon

    2010-05-01

    The urban community of Lyon, situated in France in the north of the Rhône valley, comprises 1.2 million inhabitants within 515 km ². With such a concentration of issues, policy makers and local elected officials therefore attach great importance to the management of hydrological risks, particularly due to the inherent characteristics of the territory. If the hazards associated with these risks in the territory of Lyon have been the subject of numerous analyses, studies on the vulnerability of greater Lyon are rare and have common shortcomings that impair their validity. We recall that the risk is seen as the classic relationship between the probability of occurrence of hazards and vulnerability. In this article, this vulnerability will be composed of two parts. The first one is the sensitivity of the stakes facing hydrological hazards as urban runoff, that is to say, their propensity to suffer damage during a flood (Gleize and Reghezza, 2007). The second factor is their relative importance in the functioning of the community. Indeed, not all the stakes could provide the same role and contribution to the Greater Lyon. For example, damage to the urban furniture such as bus shelter seems less harmful to the activities of the urban area than that of transport infrastructure (Renard and Chapon, 2010). This communication proposes to assess the vulnerability of Lyon urban area facing to hydrological hazards. This territory is composed of human, environmental and material stakes. The first part of this work is to identify all these issues so as to completeness. Then, is it required to build a "vulnerability index" (Tixier et al, 2006). Thus, it is necessary to use methods of multicriteria decision aid to evaluate the two components of vulnerability: the sensitivity and the contribution to the functioning of the community. Finally, the results of the overall vulnerability are presented, and then coupled to various hazards related to water such as runoff associated with

  6. Community environmental health assessment strengthens environmental public health services in the Peruvian Amazon.

    Science.gov (United States)

    Hubbard, Brian; Gelting, Richard; Baffigo, Virginia; Sarisky, John

    2005-01-01

    In December 1999, the Centers for Disease Control and Prevention (CDC) and the Cooperative for Assistance and Relief Everywhere, Peru Country Office (CARE Peru), initiated the Urban Environmental Health Project (SAU, in Spanish) to strengthen environmental public health services in urban and periurban settlements in Peru. The project received funding from the Woodruff Foundation as part of the CARE-CDC Health Initiative (CCHI). The "Protocol for Assessing Community Excellence in Environmental Health" (PACE EH) guided the development of a community environmental public health assessment (CEHA) process in Cardozo, a settlement in Iquitos, Peru. The project developed a three-phase process that merged scientific understanding and community perception about local environmental health problems. In phase 1, local environmental health technicians assisted the community in understanding environmental health conditions in Cardozo and selecting priorities. During phase 2, local technicians assessed the community-selected priorities: water and sanitation. Results from recent water quality assessments revealed that 82% (9 of 11) of samples from shallow dug wells, 18% (2 of 11) from deeper drilled wells, and 61% (11/18) from household drinking containers were positive for thermotolerant coliforms. Phase 3 activities produced an action plan and an intervention to mitigate health problems associated with inadequate water and sanitation services in the Cardozo community. As a result of the CEHA process, CARE Peru obtained funding from the United States Agency for International Development (USAID) to develop and implement an environmental health risk monitoring system and the proposed water and sewage intervention in the settlement. CDC continues to provide technical assistance to the local environmental health services groups in Iquitos through an agreement with CARE Peru as part of the USAID-funded Urban Environmental Health Models Project (MUSA). Technical assistance activities

  7. Models and parameters for environmental radiological assessments

    Energy Technology Data Exchange (ETDEWEB)

    Miller, C W [ed.

    1984-01-01

    This book presents a unified compilation of models and parameters appropriate for assessing the impact of radioactive discharges to the environment. Models examined include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Chapters have been entered separately into the data base. (ACR)

  8. Models and parameters for environmental radiological assessments

    International Nuclear Information System (INIS)

    Miller, C.W.

    1984-01-01

    This book presents a unified compilation of models and parameters appropriate for assessing the impact of radioactive discharges to the environment. Models examined include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Chapters have been entered separately into the data base

  9. A GIS BASED EVALUATION OF LAND USE CHANGES AND ECOLOGICAL CONNECTIVITY INDEX

    Directory of Open Access Journals (Sweden)

    Poppy Indrayani

    2017-03-01

    Full Text Available Recently, the Makassar region is a significant land use planning and management issue, and has many impacts on the ecological function and structure landscape. With the development and infrastructure initiatives mostly around the urban centers, the urbanization and sprawl would impact the environment and the natural resources. Therefore, environmental management and careful strategic spatial planning in landscape ecological network is crucial when aiming for sustainable development. In this paper, the impacts of land use changes from 1997 to 2012 on the landscape ecological connectivity in the Makassar region were evaluated using Geographic Information System (GIS. The resulted GIS analysis clearly showed that land use changes occurring in the Makassar region have caused profound changes in landscape pattern. The spatial model had a predictive capability allowing the quantitative assessment and comparison of the impacts resulting from different land use on the ecological connectivity index. The results had an effective performance in identifying the vital ecological areas and connectivity prior to development plan in areas.

  10. Gis-Based Wind Farm Site Selection Model Offshore Abu Dhabi Emirate, Uae

    Science.gov (United States)

    Saleous, N.; Issa, S.; Mazrouei, J. Al

    2016-06-01

    The United Arab Emirates (UAE) government has declared the increased use of alternative energy a strategic goal and has invested in identifying and developing various sources of such energy. This study aimed at assessing the viability of establishing wind farms offshore the Emirate of Abu Dhabi, UAE and to identify favourable sites for such farms using Geographic Information Systems (GIS) procedures and algorithms. Based on previous studies and on local requirements, a set of suitability criteria was developed including ocean currents, reserved areas, seabed topography, and wind speed. GIS layers were created and a weighted overlay GIS model based on the above mentioned criteria was built to identify suitable sites for hosting a new offshore wind energy farm. Results showed that most of Abu Dhabi offshore areas were unsuitable, largely due to the presence of restricted zones (marine protected areas, oil extraction platforms and oil pipelines in particular). However, some suitable sites could be identified, especially around Delma Island and North of Jabal Barakah in the Western Region. The environmental impact of potential wind farm locations and associated cables on the marine ecology was examined to ensure minimal disturbance to marine life. Further research is needed to specify wind mills characteristics that suit the study area especially with the presence of heavy traffic due to many oil production and shipping activities in the Arabian Gulf most of the year.

  11. Graphical Methodology of Global Pollution Index for the Environmental Impact Assessment Using Two Environmental Components

    Directory of Open Access Journals (Sweden)

    Corneliu Cojocaru

    2017-04-01

    Full Text Available One of the applied methods for environmental impact assessment is the index of global pollution (IGP proposed by Rojanschi in 1991. This methodology enables the global estimation for the ecosystem state affected more or less by human activities. Unfortunately, Rojanschi’s method has a limitation; it can be applied only if at least three environmental components are considered. Frequently, many environmental impact assessment applications rely on analysis of only two environmental components. Therefore, this work aimed to develop a new graphical method to extend Rojanschi’s approach for the case of two environmental components. The proposed method avoids the average value of evaluation grades and uses only the graphical correspondence for calculation of the index of global pollution. A right-angle triangle graph methodology was proposed, where bases represented the values of evaluation grades. Thus, for the case of two environmental components, the index of global pollution was calculated as the relation between the ideal and real ecosystem states represented by the ratio between areas of external and enclosed right triangles. The developed graphical method was tested and validated for real case studies: the environmental impact assessment from a refinery located on the Romanian Black Sea Coast considering Air and Water environmental components and from a coal-fired thermoelectric power plant from Eastern Romania regarding Air and Soil environmental components. In this way, it was provided a reliable and faster tool to be used for the pollution characterization of human-derived chemicals for better decisions in risk management.

  12. Integrated manure management to reduce environmental impact: II. Environmental impact assessment of strategies

    NARCIS (Netherlands)

    Vries, de J.W.; Groenestein, C.M.; Schroder, J.J.; Hoogmoed, W.B.; Sukkel, W.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

    2015-01-01

    Manure management contributes to adverse environmental impacts through losses of nitrogen (N), phosphorus, and carbon (C). In this study, we aimed to assess the potential of newly designed strategies for integrated manure management (IS) to reduce environmental impact. An important aspect of the

  13. ENVIRONMENTAL AUDITING: AN INTEGRATED ENVIRONMENTAL ASSESSMENT OF THE U.S. MID-ATLANTIC REGION

    Science.gov (United States)

    Many of today's environmental problems are regional in scope and their effects overlap and interact. We developed a simple method to provide an integrated assessment of environmental conditions and estimate cumulative impacts across a large region, by combining data on land-cove...

  14. Regional restrictions on environmental impact assessment approval in China: the legitimacy of environmental authoritarianism

    NARCIS (Netherlands)

    Zhu, X.; Zhang, L.; Ran, R.; Mol, A.P.J.

    2015-01-01

    The poor enforcement and effectiveness of environmental impact assessment (EIA) on construction and investment projects in China has long been blamed for not preventing environmental pollution and degradation. At the same time, freezing EIA approval of all new projects in an administrative region,

  15. Environmental assessment of the hot-dip galvanization processes

    Directory of Open Access Journals (Sweden)

    T. Karkoszka

    2017-01-01

    Full Text Available Processes of the hot-dip galvanization, refraining from application of dangerous chemical substances together with the necessity of ensuring the high temperatures, both pose a special threat to the environment. Therefore, the subject of analysis was environmental impact of the hot-dip galvanization process. Here has been done the identification and the assessment of the environmental aspects as well as has been pointed at the key-aspects requiring the special supervision. The developed assessment methodology can be applied by each of the organization wanting to master the processes by minimizing their environmental influence.

  16. Environmental sustainability assessment of palm biodiesel production in Thailand

    International Nuclear Information System (INIS)

    Silalertruksa, Thapat; Gheewala, Shabbir H.

    2012-01-01

    The study assesses the environmental sustainability of palm biodiesel production systems in Thailand by focusing on their energy efficiency and environmental impact potentials. The Net Energy Balance (NEB) and Renewability indicate energy gain for palm biodiesel and its co-products as compared to fossil energy inputs. In addition, life cycle assessment also reveals lower values of environmental impact potentials of biodiesel as compared to conventional diesel. For example, palm biodiesel can provide greenhouse gas (GHG) reduction of around 46–73% as compared to diesel. Nitrogen-fertilizer production and application in the plantation and the air emissions from the ponds treating palm oil mill effluent (POME) are found to be the major environmental aspects. However, the energy and environmental performances depend on various factors such as the management efficiency of empty fruit bunches (EFB) and POME and the possible land-use change in the future. Recommendations are made for improving environmental performance of palm biodiesel and for securing the long-term availability of crude palm oil supply with a view towards sustainable palm biodiesel production. -- Highlights: ► Environmental sustainability of palm biodiesel production in Thailand is assessed. ► Palm biodiesel can provide GHG reduction of around 46–73% as compared to diesel. ► Net energy ratio and renewability of palm biodiesel both range between 2 and 4. ► Efficient use of by-products in the value chain enhances environmental benefits.

  17. Environmental Assessment for decontamination and dismantlement, Pinellas Plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) (DOE/EA-1092) of the proposed decontamination and dismantlement of the Pinellas Plant in Largo, Florida. Under the Decontamination and Dismantlement EA, the DOE proposes to clean up facilities, structures, and utilities; dismantle specific structures; and mitigate or eliminate any environmental impacts associated with the cleanup, dismantlement, and related activities. Related activities include utilization of specific areas by new tenants prior to full-scale cleanup. Based on the analyses in the EA, the DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act of 1969. Therefore, the preparation of an environmental impact statement is not required. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact (FONSI).

  18. Environmental Assessment for decontamination and dismantlement, Pinellas Plant

    International Nuclear Information System (INIS)

    1995-06-01

    The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) (DOE/EA-1092) of the proposed decontamination and dismantlement of the Pinellas Plant in Largo, Florida. Under the Decontamination and Dismantlement EA, the DOE proposes to clean up facilities, structures, and utilities; dismantle specific structures; and mitigate or eliminate any environmental impacts associated with the cleanup, dismantlement, and related activities. Related activities include utilization of specific areas by new tenants prior to full-scale cleanup. Based on the analyses in the EA, the DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act of 1969. Therefore, the preparation of an environmental impact statement is not required. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact (FONSI)

  19. GIS-Based KW-GIUH hydrological model of semiarid catchments: The case of Faria Catchment, Palestine

    International Nuclear Information System (INIS)

    Shadeed, S.; Shaheen, H.; Jayyousi, A.

    2007-01-01

    Among the most basic challenges of hydrology are the quantitative understanding of the processes of runoff generation and prediction of flow hydrographs. Traditional techniques have been widely applied for the estimation of runoff hydrographs of gauged catchments using historical rainfall-runoff data and unit hydrographs. Such procedures are questioned as to their reliability and their application to ungauged, arid and semiarid catchments. To overcome such difficulties, the use of physically based rainfall-runoff process of Faria Catchment using the lately developed KW-GIUH. Faria catchment, located in the northeastern part of the West Bank, Palestine, is characterized as a semiarid region with annual rainfall depths ranging on average from 150 to 640 mm at both ends of the catchment. The Geographical Information System (GIS) techniques were used to shape the geomorphological features of the catchment. A GIS based KW-GIUH hydrological model was used to stimulate the rainfall-runoff process in the three sub-catchments of Faria, namely: Al-Badan, Al-Faria and Al-Malaqi. The simulated runoff hydrographs proved that the GIS-based KW-GIUH model is applicable to semiarid regions and can be used to estimate the unit hydrographs in the West Bank catchments. (author)

  20. GIS-based multicriteria municipal solid waste landfill suitability analysis: a review of the methodologies performed and criteria implemented.

    Science.gov (United States)

    Demesouka, O E; Vavatsikos, A P; Anagnostopoulos, K P

    2014-04-01

    Multicriteria spatial decision support systems (MC-SDSS) have emerged as an integration of the geographical information systems (GIS) and multiple criteria decision analysis (MCDA) methods. GIS-based MCDA allows the incorporation of conflicting objectives and decision maker (DM) preferences into spatial decision models. During recent decades, a variety of research articles have been published regarding the implementation of methods and/or tools in a variety of real-world case studies. The article discusses, in detail, the criteria and methods that are implemented in GIS-based landfill siting suitability analysis and especially the exclusionary and non-exclusionary criteria that can be considered when selecting sites for municipal solid waste (MSW) landfills. This paper reviews 36 seminal articles in which the evaluation of candidate landfill sites is conducted using MCDA methods. After a brief description of the main components of a MC-SDSS and the applied decision rules, the review focuses on the criteria incorporated into the decision models. The review provides a comprehensive guide to the landfill siting analysis criteria, providing details regarding the utilization methods, their decision or exclusionary nature and their monotonicity.

  1. Environmental Management Assessment of the Stanford Linear Accelerator Center

    International Nuclear Information System (INIS)

    1994-01-01

    This report documents the results of the Environmental Management Assessment of the Stanford Linear Accelerator Center (SLAC), Menlo Park, California. During this assessment, the activities conducted by the assessment team included reviews of internal documents and reports from previous assessments; interviews with the US Department of Energy (DOE), US Environmental Protection Agency, State Water Resources Board, California Regional Water Quality Control Board, and SLAC contractor personnel; and inspections and observations of selected facilities and operations. Onsite portion of the assessment was conducted from January 18 through January 31, 1994, by the DOE Office of Environmental Audit (EH-24), located within the Office of Environment, Safety and Health (EH), and the Environment and Safety Support Division (ESS), located within the Oakland Operations Office (OAK). The EH-24 environmental management assessment and the OAK functional appraisal were combined to minimize disruptions to the site. The management disciplines and three technical areas (air quality, groundwater, and inactive waste sites) were evaluated by EH-24, and four other technical areas (surface water, waste management, toxic and chemical materials, and environmental radiation) were assessed by ESS

  2. 76 FR 65717 - City of Broken Bow, OK; Notice of Availability of Final Environmental Assessment

    Science.gov (United States)

    2011-10-24

    ... final environmental assessment (EA), which analyzes the potential environmental effects of licensing the project, and concludes that licensing the project, with appropriate environmental protective measures... Bow, OK; Notice of Availability of Final Environmental Assessment In accordance with the National...

  3. 76 FR 7187 - East Texas Electric Cooperative, Inc., Texas; Notice of Availability of Environmental Assessment

    Science.gov (United States)

    2011-02-09

    ... environmental assessment (EA) that analyzes the potential environmental effects of licensing the project, and concludes that licensing the project, with appropriate environmental protective measures, would not... Electric Cooperative, Inc., Texas; Notice of Availability of Environmental Assessment February 2, 2011. In...

  4. Risk analysis within environmental impact assessment of proposed construction activity

    International Nuclear Information System (INIS)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-01

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  5. Environmental impact assessment of coal power plants in operation

    Directory of Open Access Journals (Sweden)

    Bartan Ayfer

    2017-01-01

    Full Text Available Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS. The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

  6. Environmental impact assessment of coal power plants in operation

    Science.gov (United States)

    Bartan, Ayfer; Kucukali, Serhat; Ar, Irfan

    2017-11-01

    Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS). The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

  7. GIS-based landslide susceptibility mapping models applied to natural and urban planning in Trikala, Central Greece

    Directory of Open Access Journals (Sweden)

    Skilodimou, H. D.

    2009-06-01

    Full Text Available Landslide susceptibility mapping is a practical tool in natural and urban planning; it can be applied for determining land use zones, in construction design and planning of a variety of projects. In this study, two different GIS based landslide susceptibility maps were generated in the mountainous part of the Trikala Prefecture in Thessaly, Central Greece. This was accomplished by using different methods for correlating factors, which have an effect on landslide occurrences. The instability factors taken into account were: lithology, tectonic features, slope gradients, road network, drainage network, land use and rainfall. A frequency distribution of the half number of the landslide events of the study area in each class of the instability factors was performed in order to rate the classes. Two models have been used to combine the instability factors and assess the overall landslide susceptibility, namely: the Weight Factor Model (WeF, which is a statistical method, and the Multiple Factor Model (MuF that is a logical method. The produced maps were classified into four zones: Low, Moderate, High and Very High susceptible zones and validated using the other half number of the landslide events of the area. Evaluation of the results is optimized through a Landslide Models Indicator (La.M.I..Los mapas de susceptibilidad de deslizamientos representan una práctica herramienta en la planificación urbana y de espacios naturales. Así, puede aplicarse a la determinación de los usos de terrenos, en el diseño de construcción civil y para la planificación de gran variedad de actividades. En este estudio se generaron dos tipos diferentes de mapas de susceptibilidad basados en GIS para la parte montañosa de la prefectura de Trikala en Tesalia (Grecia Central. Estos se llevaron a cabo usando dos métodos de correlación de los factores que pueden tener un efecto en la generación de deslizamientos. Los factores de desestabilización tenidos en cuenta

  8. Open source GIS based tools to improve hydrochemical water resources management in EU H2020 FREEWAT platform

    Science.gov (United States)

    Criollo, Rotman; Velasco, Violeta; Vázquez-Suñé, Enric; Nardi, Albert; Marazuela, Miguel A.; Rossetto, Rudy; Borsi, Iacopo; Foglia, Laura; Cannata, Massimiliano; De Filippis, Giovanna

    2017-04-01

    being used in the realization of groundwater modelling. They include, ionic balance calculations, chemical time-series analysis, correlation of chemical parameters, and calculation of various common hydrochemical diagrams (Salinity, Schöeller-Berkaloff, Piper, and Stiff), among others. Furthermore, it allows the generation of maps of the spatial distributions of parameters and diagrams and thematic maps for the parameters measured and classified in the queried area. References: Rossetto R., Borsi I., Schifani C., Bonari E., Mogorovich P., Primicerio M. (2013). SID&GRID: Integrating hydrological modeling in GIS environment. Rendiconti Online Societa Geologica Italiana, Vol. 24, 282-283 Steduto, P., Faurès, J.M., Hoogeveen, J., Winpenny, J.T., Burke, J.J. (2012). Coping with water scarcity: an action framework for agriculture and food security. ISSN 1020-1203 ; 38 Velasco, V., Tubau, I., Vázquez-Suñé, E., Gogu, R., Gaitanaru, D., Alcaraz, M., Sanchez-Vila, X. (2014). GIS-based hydrogeochemical analysis tools (QUIMET). Computers & Geosciences, 70, 164-180.

  9. Framework for assessment of environmental impact (Fasset)

    International Nuclear Information System (INIS)

    Larsson, C.M.

    2002-01-01

    The overall aim of the FASSET project is to develop a framework within which assessment models, relevant to the impact of ionising radiation on the environment, can be applied and results analysed for European ecosystems. Complete documentation on the FASSET project can be found on the FASSET's web-site (www.fasset.org). This paper describes the current state of the project, based on the project's first Annual Report. Seven European ecosystems are considered; four terrestrial (natural forests, semi-natural pastures, agricultural ecosystems and wetlands) and three aquatic (marine, brackish and freshwater). In FASSET Deliverable 1 a list of candidate generic reference organisms has been drawn up on the basis of expert judgement of exposure situations in the selected ecosystems. They serve as a starting points for development of dosimetric models, and for pooling available information on ecological relevance and biological effects. Further analysis of the candidate reference organisms is performed to justify their choice and assess their applicability in different situations, taking into account modelling of radionuclide transfer, estimates of internal and external dose rates, ecological significance and biological effects. Four general 'umbrella' radiation effects on biota are considered that, when manifested in an individual, may have an impact at population level or at higher levels of the organisational hierarchy. The four 'umbrellas' are: morbidity (fitness or well-being), mortality (death directly attributable to radiation), reproductive success (changed number of offspring) and scorable cytogenetic effects (molecular actions, aberrations). A database is being assembled, compiling dose and dose rates data from the literature for a number of organism categories for each of these four umbrella effects. The database also considers the suitability of data to derive the relative biological efficiency (RBE) for different types of radiation. The work from the three

  10. Assessment of environmental radioactivity for Batman, Turkey.

    Science.gov (United States)

    Damla, Nevzat; Cevik, Ugur; Kobya, Ali Ihsan; Ataksor, Berna; Isik, Umit

    2010-01-01

    The province of Batman, located in southern Anatolia, has a population of approximately 500,000. To our knowledge, there exists no information regarding the environmental radioactivity in this province. Therefore, gamma activity measurements in soil, building materials and water samples and an indoor radon survey have been carried out in the Batman province. The mean activity concentrations of the natural radionuclides (226Ra, 232Th and 40K) and a fission product (137Cs) were 35+/-8, 25+/-10, 274+/-167 and 12+/-7 Bq kg(-1), respectively, in the soil samples. The concentrations of 226Ra, 232Th and 40K in the selected building materials ranged from 18 to 48 Bq kg(-1), 8 to 49 Bq kg(-1) and 68 to 477 Bq kg(-1), respectively. All the calculated radium equivalent (Raeq) activity values of the building material samples are lower than the limit of 370 Bq kg(-1), equivalent to a gamma-dose of 1.5 mSv year(-1). The activity concentrations of 226Ra, 232Th and 40K in tap waters collected from the study area were determined with mean specific activity concentrations of 42+/-15, 35+/-9 and 524+/-190 mBq L(-1), respectively. Indoor radon measurements were made at 95 dwellings in Batman using a CR-39 detector. The radon concentration levels were found to vary from 23 to 145 Bq m(-3). The arithmetic mean of the measured radon concentration levels was found to be 84 Bq m(-3) with a standard deviation value of 23 Bq m(-3). The measurement results obtained in this study did not significantly differ from those taken in other parts of the country. The data generated in this study can be used to determine whether the Batman province is in a normal or high background radiation area and provides a valuable database for future estimations of the impact of radioactive pollution.

  11. Model of environmental life cycle assessment for coal mining operations.

    Science.gov (United States)

    Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

    2016-08-15

    This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Delineation of Suitable Cropland Areas Using a GIS Based Multi-Criteria Evaluation Approach in the Tam Dao National Park Region, Vietnam

    Directory of Open Access Journals (Sweden)

    Duong Dang Khoi

    2010-07-01

    Full Text Available Land degradation is recognized as one of the major threats to the buffer zones of protected areas (PAs in Vietnam. In particular, the expansion of land degradation into the PAs is exerting pressure on biodiversity conservation efforts. This degradation is partially the result of mismanagement: the utilization of the land is often unmatched with the inherent suitability of the land. Identification of the spatial distribution of suitable areas for cropland is essential for sustainable land-use recommendation. This paper aims to delineate the areas suitable for cropland in the Tam Dao National Park (TDNP region using a GIS-based multi-criteria evaluation of biophysical factors and Landsat ETM+ imagery. GIS is used to generate the factors, while MCE is used to aggregate them into a land suitability index. The results indicate the location and extent of crop farming areas at different suitability levels, i.e., most suitable (28.10%, moderately suitable (23.96%, marginally suitable (28.77%, and least suitable (19.17%. The current cropland covers 46.5% of the study area, while most and moderately suitable areas are estimated to be 52.06% of the territory. The results can be used to identify priority areas for crop farming and sustainable land-use management. The GIS-MCE approach provides an effective assessment tool for land-use managers working in protected areas of Vietnam.

  13. An EPA FRAMEWORK ?FOR WEIGHT OF EVIDENCE ?IN ENVIRONMENTal ASSESSMENT

    Science.gov (United States)

    The U.S. Environmental Protection Agency’s Risk Assessment Forum has developed a framework and guidelines for inference by weight of evidence. Like the Agency’s Guidelines for Ecological Risk Assessment, these guidelines are sufficiently general to be adapted to a wi...

  14. Assessment of environmental impact of solid waste dumpsites using ...

    African Journals Online (AJOL)

    Assessment of environmental impact of solid waste dumpsites using remote sensing. ... Nigerian Journal of Technology ... Vegetation Index ( SAVI )) and Shuttle Radar Topography Mission (SRTM) Digital Elevation Model (DEM) geospatial data to assess the impact of dumpsites on the environment in Benin City, Nigeria.

  15. A model for assessing the environmental impact of transport

    OpenAIRE

    Malgorzata Latuszynska; Roma Strulak-Wojcikiewicz

    2013-01-01

    Environmental effects of transport, with a particular focus on the natural environment have been discussed. The authors present methods for assessing the influence of investments in transport infrastructure on the environment, as well as the concept of a simulation model which integrates various methods and approaches used to assess the impact of such investments on the environment. (original abstract)

  16. Bridging Arctic environmental science and life cycle assessment

    DEFF Research Database (Denmark)

    Johnsen, Fredrik Moltu

    2014-01-01

    Current research aims to make the impact assessment module of life cycle assessment (LCA) less site-generic and thus more relevant to particular regions. The Arctic region attracts its share of interest when it comes to environmental issues, but little research has been performed with the explicit...

  17. Formerly Utilized Sites Remedial Action Program environmental compliance assessment checklists

    International Nuclear Information System (INIS)

    Levine, M.B.; Sigmon, C.F.

    1989-01-01

    The purpose of the Environmental Compliance Assessment Program is to assess the compliance of Formerly Utilized Site Remedial Action Program (FUSRAP) sites with applicable environmental regulations and Department of Energy (DOE) Orders. The mission is to identify, assess, and decontaminate sites utilized during the 1940s, 1950s, and 1960s to process and store uranium and thorium ores in support of the Manhattan Engineer District and the Atomic Energy Commission. To conduct the FUSRAP environmental compliance assessment, checklists were developed that outline audit procedures to determine the compliance status of the site. The checklists are divided in four groups to correspond to these regulatory areas: Hazardous Waste Management, PCB Management, Air Emissions, and Water Discharges

  18. Formerly Utilized Sites Remedial Action Program environmental compliance assessment checklists

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.B.; Sigmon, C.F.

    1989-09-29

    The purpose of the Environmental Compliance Assessment Program is to assess the compliance of Formerly Utilized Site Remedial Action Program (FUSRAP) sites with applicable environmental regulations and Department of Energy (DOE) Orders. The mission is to identify, assess, and decontaminate sites utilized during the 1940s, 1950s, and 1960s to process and store uranium and thorium ores in support of the Manhattan Engineer District and the Atomic Energy Commission. To conduct the FUSRAP environmental compliance assessment, checklists were developed that outline audit procedures to determine the compliance status of the site. The checklists are divided in four groups to correspond to these regulatory areas: Hazardous Waste Management, PCB Management, Air Emissions, and Water Discharges.

  19. An environmental impact assessment system for agricultural R and D

    International Nuclear Information System (INIS)

    Rodrigues, Geraldo Stachetti; Campanhola, Clayton; Kitamura, Paulo Choji

    2003-01-01

    A strategic planning process has been implemented at the Brazilian Agricultural Research Agency (Embrapa) to introduce sustainable agriculture concepts in all steps of Research and Development (R and D). An essential part of the devised mission statement called for the impact assessment of all technology innovation resulting from R and D, under field conditions (ex-post). However, methods for impact assessment of technology innovations at the farmstead level appropriate for the institutional context were lacking. The environmental impact assessment (EIA) system (AMBITEC-AGRO) developed to attend that demand is composed by a set of weighing matrices constructed in an electronic spreadsheet. Impact indicators are evaluated in the field in an interview/survey, and weighed according to their spatial scale and importance toward effecting environmental impacts. The results of these weighing procedures are expressed graphically in the assessment spreadsheets. Finally, the indicator evaluations are composed into an Environmental Impact Index for the agricultural technology innovation

  20. Collaborative environmental assessment in the Northwest Territories, Canada

    International Nuclear Information System (INIS)

    Armitage, Derek R.

    2005-01-01

    Recent trends in environmental assessment theory and practice indicate a growing concern with collaboration and learning. Although there are few examples of the institutional, organizational, and socio-political forms and processes required to foster this collaboration and learning, the establishment of an environmental planning, management, and assessment regime in Canada's Northwest Territories offers useful insights. Consequently, this paper identifies and examines the institutional, organizational, and socio-political conditions that have encouraged more collaborative forms of environmental assessment practice in the Northwest Territories. Key issues highlighted include: (1) the development of decentralized regulatory organizations more responsive to changing circumstances; (2) strategies for more effective communication and participation of community interests; (3) efforts to build a collaborative vision of economic and social development through region-specific land use plans; (4) the integration of knowledge frameworks; and (5) a concern with the capacity required to encourage effective intervention in the assessment process

  1. Social and environmental aspects of the Manantali dam. Retrospective assessment

    International Nuclear Information System (INIS)

    Ficatier, Yves; Niasse, Madiodio

    2008-04-01

    After the great drought of the 1970's, and in order to better exploit the water resources of the Senegal river basin, an important project had been launched which comprises the Diama and Manantali dams, the construction or rehabilitation of dikes, and the construction of a hydroelectric plant for the Manantali dam. In order to provide a retrospective assessment of the social and environmental aspects (impacts on agriculture, fishing, electricity production, water availability, and so on) associated with the Manantali dam, this study reports an analysis of major advances and problems noticed at the social and environmental level in the Senegal river basin, an assessment of negative and positive social and environmental impacts of various components of the project achieved with the financial support of French and German institutions (deforestation, construction of both dams, of dikes, and of the energy equipment), an analysis of the way these social and environmental impacts have been managed all along the planning and realisation process, an assessment of social and environmental impacts of the program as a whole (impact studies, realisation, noticed impacts, efficiency in impact management), an analysis of the way existing standards of the moment have been taken into account in the management of environmental issues, and a global assessment of the program according to criteria defined by the DAC (Development Assistance Committee) of the OECD: relevance, efficiency, impact on development, and sustainability

  2. 76 FR 27303 - Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment...

    Science.gov (United States)

    2011-05-11

    ... petition, draft environmental assessment, or plant pest risk assessment, contact Ms. Cindy Eck at (301) 734-0667, e-mail: cynthia.a.eck@aphis.usda.gov . SUPPLEMENTARY INFORMATION: Background Under the authority...

  3. Assessing population viability while accounting for demographic and environmental uncertainty.

    Science.gov (United States)

    Oppel, Steffen; Hilton, Geoff; Ratcliffe, Norman; Fenton, Calvin; Daley, James; Gray, Gerard; Vickery, Juliet; Gibbons, David

    2014-07-01

    Predicting the future trend and viability of populations is an essential task in ecology. Because many populations respond to changing environments, uncertainty surrounding environmental responses must be incorporated into population assessments. However, understanding the effects of environmental variation on population dynamics requires information on several important demographic parameters that are often difficult to estimate. Integrated population models facilitate the integration of time series data on population size and all existing demographic information from a species, allowing the estimation of demographic parameters for which limited or no empirical data exist. Although these models are ideal for assessments of population viability, they have so far not included environmental uncertainty. We incorporated environmental variation in an integrated population model to account for both demographic and environmental uncertainty in an assessment of population viability. In addition, we used this model to estimate true juvenile survival, an important demographic parameter for population dynamics that is difficult to estimate empirically. We applied this model to assess the past and future population trend of a rare island endemic songbird, the Montserrat Oriole Icterus oberi, which is threatened by volcanic activity. Montserrat Orioles experienced lower survival in years with volcanic ashfall, causing periodic population declines that were compensated by higher seasonal fecundity in years with high pre-breeding season rainfall. Due to the inclusion of both demographic and environmental uncertainty in the model, the estimated population growth rate in the immediate future was highly imprecise (95% credible interval 0.844-1.105), and the probability of extinction after three generations (in the year 2028) was low (2.1%). This projection demonstrates that accounting for both demographic and environmental sources of uncertainty provides a more realistic assessment

  4. Variability of building environmental assessment tools on evaluating carbon emissions

    International Nuclear Information System (INIS)

    Ng, S. Thomas; Chen Yuan; Wong, James M.W.

    2013-01-01

    With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: ► Carbon emission evaluation in building environmental assessment schemes are studied. ► Simulative carbon emission is modeled for building environmental assessment schemes. ► Carbon assessments focus primarily on operational stage instead of entire lifecycle. ► Baseline and benchmark of carbon assessment vary greatly among BEA schemes. ► A more transparent and comprehensive framework for carbon assessment is required.

  5. Environmental qualitative assessment of rivers sediments

    Directory of Open Access Journals (Sweden)

    A.R. Karbassi

    2015-04-01

    Full Text Available In this study, the concentrations of heavy metals (Ca, Zn, Cu, Fe, Mn, Ni in thesediment of Shavoor River in Khuzestan Province in Iran has been investigated. After the library studies and field studies, six samples of water and sediment were taken from the river in order to evaluate heavy metal pollution in sediments. To determine the geochemical phases of metals in sediment samples the 5-step method was used for chemical separation. For quantitative assessment of the severity of contamination in the sediments, the geochemical indicators such as enriched factor (EF and the accumulation index (Igeo were used. Also, the statistical analyses including methods such as correlation analysis cluster analysis the (CA, were conducted.The results of the experiments showed that the organic matter deposited varies with the average of 2.49 and ranges between 1.95% and 3.43%. Samples showed concentrations of metals such as calcium, iron, manganese, copper and nickel at all the sampling points were below the global average, whereas the concentration of copper was slightly higher than the global scale. Enriched factor (EF was calculated for the elements revealed that heavy metals are classified as non-infected. The Geo-accumulation Index showed that the studied elements were uninfected peers. Based on the results of multivariate statistical analysis it was concluded that metals such as manganese, copper, iron, nickel and zinc are mainly natural and calcium metal is likely to have an organic origin.

  6. Environmental, health, and safety assessment of photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Rose, E.C.

    1983-10-15

    Potential enviornmental, health, and safety (E,H and S) concerns associated with all phases of the photovoltaic (PV) energy system life cycle are identified and assessed. E,H and S concerns affecting the achievement of National PV Program goals or the viability of specific PV technologies are emphasized. The report is limited to near-term manufacturing process alternatives for crystalline silicon PV materials, addresses flat-plate and concentrator collector designs, and reviews system deployment in grid-connected, roof-mounted, residential and ground-mounted central-station applications. The PV life-cycle phases examined include silicon refinement and manufacture of PV collectors, system deployment, and decommissioning. The primary E,H and S concerns that arise during collector fabrication are associated with occupational exposure to materials of undetermined toxicity or to materials that are known to be hazardous, but for which process control technology may be inadequate. Stricter exposure standards are anticipated for some materials and may indicate a need for further control technology development. Minimizing electric shock hazards is a significant concern during system construction, operation and maintenance, and decommissioning.

  7. Power Systems Development Facility. Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    The objective of the PSDF would be to provide a modular facility which would support the development of advanced, pilot-scale, coal-based power systems and hot gas clean-up components. These pilot-scale components would be designed to be large enough so that the results can be related and projected to commercial systems. The facility would use a modular approach to enhance the flexibility and capability for testing; consequently, overall capital and operating costs when compared with stand-alone facilities would be reduced by sharing resources common to different modules. The facility would identify and resolve technical barrier, as well as-provide a structure for long-term testing and performance assessment. It is also intended that the facility would evaluate the operational and performance characteristics of the advanced power systems with both bituminous and subbituminous coals. Five technology-based experimental modules are proposed for the PSDF: (1) an advanced gasifier module, (2) a fuel cell test module, (3) a PFBC module, (4) a combustion gas turbine module, and (5) a module comprised of five hot gas cleanup particulate control devices. The final module, the PCD, would capture coal-derived ash and particles from both the PFBC and advanced gasifier gas streams to provide for overall particulate emission control, as well as to protect the combustion turbine and the fuel cell.

  8. Assessment of Soil Environmental Quality in Huangguoshu Waterfalls Scenic Area

    Science.gov (United States)

    Luo, Rongbin; Feng, Kaiyu; Gu, Bo; Xu, Chengcheng

    2018-03-01

    This paper concentrates on five major heavy metal pollutants as soil environmental quality evaluation factors, respectively Lead (Pb), Cadmium (Cd), Mercury (Hg), Arsenic (As), Chromium (Cr), based on the National Soil Environmental Quality Standards (GB15618 - 1995), we used single factor index evaluation model of soil environmental quality and comprehensive index evaluation model to analyze surface soil environmental quality in the Huangguoshu Waterfalls scenic area. Based on surface soil analysis, our results showed that the individual contamination index, Pb, Hg, As and Cr in the Huangguoshu Waterfalls scenic area met class I according to requirements of National Soil Environmental Quality Standards, which indicated that Pb, Hg, As and Cr were not main heavy metal pollutants in this area, but the individual contamination index of Cd in soil was seriously exceeded National Soil Environmental Quality Standards’ requirement. Soil environmental quality in Shitouzhai, Luoshitan, Langgong Hongyan Power Plant have exceeded the requirement of National Soil Environmental Quality Standards “0.7soils had been slightly polluted; the classification of soil environmental quality assessment in Longgong downstream area was above “Alert Level”, it indicated that soil in this area was not polluted. Above all, relevant measures for soil remediation are put forward.

  9. Environmental site assessments should include radon gas testing

    International Nuclear Information System (INIS)

    Nardi, M.A.

    1991-01-01

    There are two emerging influences that will require radon gas testing as part of many property transfers and most site assessments. These requirements come from lending regulators and state legislatures. Fannie Mae and others have developed environmental investigation guidelines for the purchase of environmentally contaminated real estate. These guidelines include radon gas testing for many properties. Several states have enacted laws that require environmental disclosure forms be prepared to ensure that the parties involved in certain real estate transactions are aware of the environmental liabilities that may come with the transfer of property. Indiana has recently enacted legislation that would require the disclosure of the presence of radon gas on many commercial real estate transactions. With more lenders and state governments likely to follow this trend, radon gas testing should be performed during all property transfers and site assessment to protect the parties involved from any legal liabilities

  10. Environmental impact assessment for energy pathways: an integrated methodology

    International Nuclear Information System (INIS)

    Sommereux-Blanc, Isabelle

    2010-01-01

    This document presents the synthesis of my research work contributing to the development of an integrated methodology of environmental impact assessment for energy pathways. In the context of world globalization, environmental impact assessments issues are highly linked with the following questioning: Which environmental impacts? for which demand? at which location? at which temporal scale? My work is built upon the definition of a conceptual framework able to handle these issues and upon its progressive implementation. The integration of the spatial and temporal issues within the methodology are key elements. Fundamental cornerstones of this framework are presented along the DPSIR concept (Driving forces, Pressures, State, Impacts, Responses). They cover a comprehensive analysis of the limits and the relevance of life cycle analysis and the development of a geo-spatialized environmental performance approach for an electrical production pathway. Perspectives linked with the development of this integrated methodology are detailed for energy pathways. (author)

  11. [Environmental Hazards Assessment Program annual report, June 1992--June 1993

    International Nuclear Information System (INIS)

    1993-01-01

    The Medical University of South Carolina (MUSC) and the University of Charleston, South Carolina (UCSC) propose to offer the degree of Master of Science in Environmental Studies. The proposed starting date is August 1994. The purpose of this interdisciplinary program is to offer nationally and internationally recognized graduate level training in the areas of environmental policy, science, and health risk assessment. Special emphasis will be placed on human health. Included in this proposal are a needs assessment for environmental science professionals along with employment projections and salary expectations. The Environmental Science program is described and its relationship to other programs within MUSC and UCSC, as well as its relation to similar programs at other institutions are examined. Enrollment is discussed, admission requirements and standards outlined, and the curriculum is described. Academic and physical resources are examined and estimated costs are given

  12. Environmental assessment for the deactivation of the N Reactor facilities

    International Nuclear Information System (INIS)

    1995-05-01

    This environmental assessment (EA) provides information for the US Department of Energy (DOE) to decide whether the Proposed Action for the N Reactor facilities warrants a Finding of No Significant Impact or requires the preparation of an environmental impact statement (EIS). The EA describes current conditions at the N Reactor facilities, the need to take action at the facilities, the elements of the Proposed Action and alternatives, and the potential environmental impacts. As required by the National Environmental Policy Act of 1969 (NEPA), this EA complies with Title 40, Code of Federal Regulations (CFR), parts 1500--1508, ''Regulations for Implementing the Procedural Provisions of NEPA. '' It also implements the ''National Environmental Policy Act; Implementing Procedures and Guidelines'' (10 CFR 1021)

  13. Independence and the Irish Environmental Protection Agency: A Comparative Assessment

    OpenAIRE

    Shipan, Charles

    2006-01-01

    The Environmental Protection Agency is one of the most prominent regulatory agencies in Ireland. Created in 1992, one of the hallmarks of this agency is its independence from other parts of government. Yet little is known about the actual extent of its independence. Independence and the Irish Environmental Protection Agency: A Comparative Assessment addresses several key questions about the agency's independence. Why was independence such a primary justification for the creation of this a...

  14. Hellsgate Winter Range : Wildlife Mitigation Project. Preliminary Environmental Assessment.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1995-01-01

    The Bonneville Power Administration proposes funding the Hellsgate Winter Range Wildlife Mitigation Project in cooperation with the Colville Convederated Tribes and Bureau of Indian Affairs. This Preliminary Environmental Assessment examines the potential environmental effects of acquiring and managing property for wildlife and wildlife habitat within a large project area. The Propose action is intended to meet the need for mitigation of wildlife and wild life habitat that was adversely affected by the construction of Grand Coulee and Chief Joseph Dams and their reservoirs.

  15. Environmental performance assessment: a case study in the paper industry

    Directory of Open Access Journals (Sweden)

    Paula Antonov

    2011-09-01

    Full Text Available The inherent complexity of environmental performance measurement makes it difficult to be gauged, sending it forth to methodologies supported on assessments of the various factors that could influence the overall performance. In association with the environmental performance lies the need to create methods that allows the assessment over the time in order to facilitate comparisons amongst different organizations or operations of a same company. Measurement of environmental performance comes from several sources thus a dominant approach widely recognized and accepted by the academic community and organizations can not be singled out. The purpose of this review is to test a method for assessing environmental performance in a manufacturer organization, performing a case study in the paper industry. The results can be compared with other operations and can be used, cumulatively, in supply chains. The specific objectives are (i to model the environmental performance of the transaction, (ii to use the model to measure performance, and (iii to interpret the results and come to a conclusion. It begins with a review of the environmental performance measurement and then proceeds to the description of the research methodology and the results of its application. The method consists of five constructs, assessed by managers and processes experts according to their potential of environmental performance's improvement: solid waste, wastewater, gas emissions, deployment of natural resources, and legal compliance. The constructs are perceived by qualitative indicators categorically evaluated. The final result is an index of 76.69%, which represents the environmental performance of the operation.

  16. Role of the Analytic Element Method in regional-scale GIS-based modeling of groundwater flow and transport

    Science.gov (United States)

    Jankovic, I.

    2003-12-01

    The basic principle of the Analytic Element Method (AEM) is the superposition: complex regional-scale flows are simulated by adding the influences of individual analytic elements. Each analytic element contains geographic information and mathematical functions that describe its influence on regional groundwater flow. The main AEM advantage, relevant to GIS-based modeling, is a direct correspondence of analytic elements and hydrologic aquifer features (such as lakes, rivers, water-supply wells). The flow solution (water table elevation and fluxes) is created without discretization by including all relevant elements (or features). Several regional-scale groundwater models have been developed using the AEM include NAGROM (the National Groundwater Model of The Netherlands) and the Twin Cities Metropolitan Area Groundwater Model (Metro Model). The one-to-one correspondence of elements to hydrologic features allows for elegant integration of groundwater modeling and GIS software. This simplifies both model development and management. In contrast to finite-difference and finite-element based methods, the AEM does not require any grid-based data; all input data are vector-based. This representational style coincides well with the strengths of Geographic Information Systems. This presentation will focus on both the practical aspects of the AEM relevant to GIS-based modeling and the development of a new GIS-based user interface for AEM modeling. Recent computational advances related to regional-scale modeling using AEM will be discussed and demonstrated. These advances include (1) development of solution algorithms designed for massively parallel supercomputers where the same advantage (one-to-one correspondence of analytic elements and hydrologic features) is responsible for efficient implementation in parallel environments, and (2) algorithm enhancements designed for single-processor machines. Groundwater models with thousands of elements can hence be solved. A public

  17. Environmental impact assessment for the Nova projects (Building 391 complex)

    International Nuclear Information System (INIS)

    Odell, B.N.

    1979-01-01

    The environmental impact assessment of the Nova projects (Building 391 Complex) describes (1) the proposed actions, (2) the existing environment in and around the Livermore Valley, and (3) the potential environmental impacts from the construction and operation of these facilities. It shows that the proposed action does not conflict with any Federal, State, Regional, or Local Plans and Programs. Possible alternatives to the proposed action are discussed. However, it is concluded that the proposed actions were the most reasonable of the alternatives and would involve relatively minor adverse environmental impacts

  18. A qualitative method proposal to improve environmental impact assessment

    International Nuclear Information System (INIS)

    Toro, Javier; Requena, Ignacio; Duarte, Oscar; Zamorano, Montserrat

    2013-01-01

    In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown

  19. Environmental monitoring, restoration and assessment: What have we learned?

    International Nuclear Information System (INIS)

    Gray, R.H.

    1990-01-01

    The Twenty-Eighth Hanford Symposium on Health and the Environment was held in Richland, Washington, October 16--19, 1989. The symposium was sponsored by the US Department of Energy and the Pacific Northwest Laboratory, operated by Battelle Memorial Institute. The symposium was organized to review and evaluate some of the monitoring and assessment programs that have been conducted or are currently in place. Potential health and environmental effects of energy-related and other industrial activities have been monitored and assessed at various government and private facilities for over three decades. Most monitoring is required under government regulations; some monitoring is implemented because facility operators consider it prudent practice. As a result of these activities, there is now a substantial radiological, physical, and chemical data base for various environmental components, both in the United States and abroad. Symposium participants, both platform and poster presenters, were asked to consider, among other topics, the following: Has the expenditure of millions of dollars for radiological monitoring and assessment activities been worth the effort? How do we decide when enough monitoring is enough? Can we adequately assess the impacts of nonradiological components -- both inorganic and organic -- of wastes? Are current regulatory requirements too restrictive or too lenient? Can monitoring and assessment be made more cost effective? Papers were solicited in the areas of environmental monitoring; environmental regulations; remediation, restoration, and decommissioning; modeling and dose assessment; uncertainty, design, and data analysis; and data management and quality assurance. Individual reports are processed separately for the databases

  20. Environmental monitoring, restoration and assessment: What have we learned

    Energy Technology Data Exchange (ETDEWEB)

    Gray, R.H. (ed.)

    1990-01-01

    The Twenty-Eighth Hanford Symposium on Health and the Environment was held in Richland, Washington, October 16--19, 1989. The symposium was sponsored by the US Department of Energy and the Pacific Northwest Laboratory, operated by Battelle Memorial Institute. The symposium was organized to review and evaluate some of the monitoring and assessment programs that have been conducted or are currently in place. Potential health and environmental effects of energy-related and other industrial activities have been monitored and assessed at various government and private facilities for over three decades. Most monitoring is required under government regulations; some monitoring is implemented because facility operators consider it prudent practice. As a result of these activities, there is now a substantial radiological, physical, and chemical data base for various environmental components, both in the United States and abroad. Symposium participants, both platform and poster presenters, were asked to consider, among other topics, the following: Has the expenditure of millions of dollars for radiological monitoring and assessment activities been worth the effort How do we decide when enough monitoring is enough Can we adequately assess the impacts of nonradiological components -- both inorganic and organic -- of wastes Are current regulatory requirements too restrictive or too lenient Can monitoring and assessment be made more cost effective Papers were solicited in the areas of environmental monitoring; environmental regulations; remediation, restoration, and decommissioning; modeling and dose assessment; uncertainty, design, and data analysis; and data management and quality assurance. Individual reports are processed separately for the databases.