WorldWideScience

Sample records for gis based approach

  1. A GIS based hydrogeomorphic approach for identification of site ...

    Indian Academy of Sciences (India)

    a Geographical Information System (GIS) based hydrogeomorphic approach in the Bhatsa and. Kalu river basins of Thane district, in western DVP. The criteria adopted for the GIS analysis were based .... segments of the rivers. The majority of the lineaments correspond to either dyke ridges or stream channels which are of ...

  2. GIS-based Approaches to Catchment Area Analyses of Mass Transit

    DEFF Research Database (Denmark)

    Andersen, Jonas Lohmann Elkjær; Landex, Alex

    2009-01-01

    Catchment area analyses of stops or stations are used to investigate potential number of travelers to public transportation. These analyses are considered a strong decision tool in the planning process of mass transit especially railroads. Catchment area analyses are GIS-based buffer and overlay...... analyses with different approaches depending on the desired level of detail. A simple but straightforward approach to implement is the Circular Buffer Approach where catchment areas are circular. A more detailed approach is the Service Area Approach where catchment areas are determined by a street network...... search to simulate the actual walking distances. A refinement of the Service Area Approach is to implement additional time resistance in the network search to simulate obstacles in the walking environment. This paper reviews and compares the different GIS-based catchment area approaches, their level...

  3. Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Roberts, Billy J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-04-05

    Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solar photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.

  4. An uncertainty and sensitivity analysis approach for GIS-based multicriteria landslide susceptibility mapping

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Blaschke, Thomas

    2014-01-01

    GIS-based multicriteria decision analysis (MCDA) methods are increasingly being used in landslide susceptibility mapping. However, the uncertainties that are associated with MCDA techniques may significantly impact the results. This may sometimes lead to inaccurate outcomes and undesirable consequences. This article introduces a new GIS-based MCDA approach. We illustrate the consequences of applying different MCDA methods within a decision-making process through uncertainty analysis. Three GIS-MCDA methods in conjunction with Monte Carlo simulation (MCS) and Dempster–Shafer theory are analyzed for landslide susceptibility mapping (LSM) in the Urmia lake basin in Iran, which is highly susceptible to landslide hazards. The methodology comprises three stages. First, the LSM criteria are ranked and a sensitivity analysis is implemented to simulate error propagation based on the MCS. The resulting weights are expressed through probability density functions. Accordingly, within the second stage, three MCDA methods, namely analytical hierarchy process (AHP), weighted linear combination (WLC) and ordered weighted average (OWA), are used to produce the landslide susceptibility maps. In the third stage, accuracy assessments are carried out and the uncertainties of the different results are measured. We compare the accuracies of the three MCDA methods based on (1) the Dempster–Shafer theory and (2) a validation of the results using an inventory of known landslides and their respective coverage based on object-based image analysis of IRS-ID satellite images. The results of this study reveal that through the integration of GIS and MCDA models, it is possible to identify strategies for choosing an appropriate method for LSM. Furthermore, our findings indicate that the integration of MCDA and MCS can significantly improve the accuracy of the results. In LSM, the AHP method performed best, while the OWA reveals better performance in the reliability assessment. The WLC

  5. GIS4schools: a new approach in GIS education

    Science.gov (United States)

    Demharter, Timo; Michel, Ulrich

    2012-10-01

    From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS (KERSKI 2000, SCHLEICHER 2004). Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

  6. A GIS-based Quantitative Approach for the Search of Clandestine Graves, Italy.

    Science.gov (United States)

    Somma, Roberta; Cascio, Maria; Silvestro, Massimiliano; Torre, Eliana

    2018-05-01

    Previous research on the RAG color-coded prioritization systems for the discovery of clandestine graves has not considered all the factors influencing the burial site choice within a GIS project. The goal of this technical note was to discuss a GIS-based quantitative approach for the search of clandestine graves. The method is based on cross-referenced RAG maps with cumulative suitability factors to host a burial, leading to the editing of different search scenarios for ground searches showing high-(Red), medium-(Amber), and low-(Green) priority areas. The application of this procedure allowed several outcomes to be determined: If the concealment occurs at night, then the "search scenario without the visibility" will be the most effective one; if the concealment occurs in daylight, then the "search scenario with the DSM-based visibility" will be most appropriate; the different search scenarios may be cross-referenced with offender's confessions and eyewitnesses' testimonies to verify the veracity of their statements. © 2017 American Academy of Forensic Sciences.

  7. GIS-based Approach to Estimate Surface Runoff in Small Catchments: A Case Study

    Directory of Open Access Journals (Sweden)

    Vojtek Matej

    2016-09-01

    Full Text Available The issue of surface runoff assessment is one of the important and relevant topics of hydrological as well as geographical research. The aim of the paper is therefore to estimate and assess surface runoff on the example of Vyčoma catchment which is located in the Western Slovakia. For this purpose, SCS runoff curve number method, modeling in GIS and remote sensing were used. An important task was the creation of a digital elevation model (DEM, which enters the surface runoff modeling and affects its accuracy. Great attention was paid to the spatial interpretation of land use categories applying aerial imagery from 2013 and hydrological soil groups as well as calculation of maximum daily rainfall with N-year return periods as partial tasks in estimating surface runoff. From the methodological point of view, the importance of the paper can be seen in the use of a simple GIS-based approach to assess the surface runoff conditions in a small catchment.

  8. Cloud Based GIS Approach for Monitoring Environmental Pollution in the Coastal Zone of Kalutara, Sri Lanka

    Directory of Open Access Journals (Sweden)

    M.S.P.M. Sirirwardane

    2015-09-01

    Full Text Available Geographic Information Systems (GIS can be used as a powerful tool in many aspects of handling geospatial data. By considering the modern geospatial approaches, this research is focused on monitoring environmental pollution in the coastal zone of Kalutara area, with the objective of identification of existing natural resources. Green vegetation patches, water bodies and beech areas were detected using remote sensing techniques. A detailed GPS field survey was conducted and identified minor environmental resources with various pollution incidents. This information was used to improve the available data sets. The types of pollution incidents were categorised according to the severity level by considering the relationship to each natural resource. Maps were created and data was uploaded to the ArcGIS online cloud platform. Web services were hosted using this cloud infrastructure. Pollution incidents data layer has been given web based editing capabilities for field monitoring using GPS enabled mobiles. Field observations were conducted and locations of the pollution effects were uploaded into web maps from the field with related attributes. The hot spots were used to get better understanding and awareness of the environmental pollution. As the results, pollution incidents were identified and there was a significant effect to the minor environmental elements. The cloud infrastructure, helped to bring down the barriers of data sharing and the incident reporting mechanism became more convenient during the field observations.

  9. A novel GIS-based approach to assess beekeeping suitability of Mediterranean lands.

    Science.gov (United States)

    Zoccali, Paolo; Malacrinò, Antonino; Campolo, Orlando; Laudani, Francesca; Algeri, Giuseppe M; Giunti, Giulia; Strano, Cinzia P; Benelli, Giovanni; Palmeri, Vincenzo

    2017-07-01

    Honeybees are critically important for the environment and to the economy. However, there are in substantial decline worldwide, leading to serious threat to the stability and yield of food crops. Beekeeping is of pivotal importance, combining the wide economical aspect of honey production and the important ecological services provided by honeybees. In this scenario, the prompt identification of beekeeping areas is strategic, since it maximised productivity and lowered the risks of colony losses. Fuzzy logic is an ideal approach for problem-solving tasks, as it is specifically designed to manage problems with a high degree of uncertainty. This research tested a novel GIS-based approach to assess beekeeping suitability of lands located in Calabria (Southern Italy), without relying to Analytic Hierarchy Process - Multiple Criteria Decision Making (AHP-MCDM), thus avoiding the constraints due to the technique and decision makers' influences. Furthermore, the data used here were completely retrieved from open access sources, highlighting that our approach is characterized by low costs and can be easily reproduced for a wide arrays of geographical contexts. Notably, the results obtained by our experiments were validated by the actual beekeeping reality. Besides beekeeping, the use of this system could not only be applied in beekeeping land suitability evaluations, but may be successfully extended to other types of land suitability evaluations.

  10. A GIS based spatially-explicit sensitivity and uncertainty analysis approach for multi-criteria decision analysis☆

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Jankowski, Piotr; Blaschke, Thomas

    2014-01-01

    GIS multicriteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for the prediction of future hazards, land use planning, as well as for hazard preparedness. However, the uncertainties associated with MCDA techniques are inevitable and model outcomes are open to multiple types of uncertainty. In this paper, we present a systematic approach to uncertainty and sensitivity analysis. We access the uncertainty of landslide susceptibility maps produced with GIS-MCDA techniques. A new spatially-explicit approach and Dempster–Shafer Theory (DST) are employed to assess the uncertainties associated with two MCDA techniques, namely Analytical Hierarchical Process (AHP) and Ordered Weighted Averaging (OWA) implemented in GIS. The methodology is composed of three different phases. First, weights are computed to express the relative importance of factors (criteria) for landslide susceptibility. Next, the uncertainty and sensitivity of landslide susceptibility is analyzed as a function of weights using Monte Carlo Simulation and Global Sensitivity Analysis. Finally, the results are validated using a landslide inventory database and by applying DST. The comparisons of the obtained landslide susceptibility maps of both MCDA techniques with known landslides show that the AHP outperforms OWA. However, the OWA-generated landslide susceptibility map shows lower uncertainty than the AHP-generated map. The results demonstrate that further improvement in the accuracy of GIS-based MCDA can be achieved by employing an integrated uncertainty–sensitivity analysis approach, in which the uncertainty of landslide susceptibility model is decomposed and attributed to model's criteria weights. PMID:25843987

  11. A GIS based spatially-explicit sensitivity and uncertainty analysis approach for multi-criteria decision analysis.

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Jankowski, Piotr; Blaschke, Thomas

    2014-03-01

    GIS multicriteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for the prediction of future hazards, land use planning, as well as for hazard preparedness. However, the uncertainties associated with MCDA techniques are inevitable and model outcomes are open to multiple types of uncertainty. In this paper, we present a systematic approach to uncertainty and sensitivity analysis. We access the uncertainty of landslide susceptibility maps produced with GIS-MCDA techniques. A new spatially-explicit approach and Dempster-Shafer Theory (DST) are employed to assess the uncertainties associated with two MCDA techniques, namely Analytical Hierarchical Process (AHP) and Ordered Weighted Averaging (OWA) implemented in GIS. The methodology is composed of three different phases. First, weights are computed to express the relative importance of factors (criteria) for landslide susceptibility. Next, the uncertainty and sensitivity of landslide susceptibility is analyzed as a function of weights using Monte Carlo Simulation and Global Sensitivity Analysis. Finally, the results are validated using a landslide inventory database and by applying DST. The comparisons of the obtained landslide susceptibility maps of both MCDA techniques with known landslides show that the AHP outperforms OWA. However, the OWA-generated landslide susceptibility map shows lower uncertainty than the AHP-generated map. The results demonstrate that further improvement in the accuracy of GIS-based MCDA can be achieved by employing an integrated uncertainty-sensitivity analysis approach, in which the uncertainty of landslide susceptibility model is decomposed and attributed to model's criteria weights.

  12. Small Core, Big Network: A Comprehensive Approach to GIS Teaching Practice Based on Digital Three-Dimensional Campus Reconstruction

    Science.gov (United States)

    Cheng, Liang; Zhang, Wen; Wang, Jiechen; Li, Manchun; Zhong, Lishan

    2014-01-01

    Geographic information science (GIS) features a wide range of disciplines and has broad applicability. Challenges associated with rapidly developing GIS technology and the currently limited teaching and practice materials hinder universities from cultivating highly skilled GIS graduates. Based on the idea of "small core, big network," a…

  13. A GIS-based approach to prevent contamination of groundwater at regional scale

    Science.gov (United States)

    Balderacchi, M.; Vischetti, C.; di Guardo, A.; Trevisan, M.

    2009-04-01

    Sustainable development is a fundamental objective of the European Union. Since 1991, the use of numerical models has been used to assess the environmental fate of pesticides (directive 91/414 EC). Since then, new approaches to assess pesticide contamination have been developed. This is an ongoing process, with approaches getting increasingly close to reality. Actually, there is a new challenge to integrate the most advanced and cost-effective monitoring strategies with simulation models so that reliable indicators of unsaturated flow and transport can be suitably mapped and coupled with other indicators related to productivity and sustainability. The most relevant role of GIS in the analysis of pesticide fate in soil is its application to process together input data and the results of distribution model based simulations of pesticide transport. FitoMarche is a GIS-based software tool that estimates pesticide movement in the unsaturated zone using MACRO 5 and it is able to simulate complex and real crop rotations at the regional scale. Crop rotation involves the sequential production of different plant species on the same land, every crop is characterized by different agricultural practices that involve the use of different pesticides at different doses. FitoMarche extracts MACRO input data from a series of geographic data sets (shapefiles) and an internal database, writes input files for MACRO, executes the simulation and extracts solute and water fluxes from MACRO output files. The study has been performed in the Marche region, located in central Italy along the Adriatic coast. Soil, climate, land use shapefiles were provided from public authorities, crop rotation schemes were estimated from ISTAT (the national statistics institute) 5th agricultural census database using a municipality detail and agricultural practices following the local customs. Two herbicides have been tested: "A" is employed on maize crop, and "B" on maize, sunflower and sugarbeet. In the

  14. Cloud GIS Based Watershed Management

    Science.gov (United States)

    Bediroğlu, G.; Colak, H. E.

    2017-11-01

    In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

  15. GIS-Based Approach for Municipal Renewable Energy Planning to Support Post-Earthquake Revitalization: A Japanese Case Study

    Directory of Open Access Journals (Sweden)

    Qianna Wang

    2016-07-01

    Full Text Available Following a regional-level study conducted in Fukushima Prefecture, Japan (Wang et al., 2014 [1], this paper presents an approach for municipal renewable energy planning and its experimental application in a Japanese municipality using a Geographic Information System (GIS. The proposed approach is comprised of local issue identification, renewable energy potential evaluation and visualization, site comparison and scenario analysis. GIS was used to analyze and visualize solar, wind and biomass (forest and agriculture residue potential within Kawamata Town, Fukushima, Japan. According to local conditions, all potential sites were coded and then compared based on different criteria, such as solar radiation, wind speed, slope and land uses, among others. In the scenario analysis section, two scenarios, “renewable energy prioritized” and ”evacuation area prioritized”, were adopted and compared. The scenarios are altered in terms of placement and the number of renewable energy facilities inside and outside evacuation areas within the town. The results generated through the proposed approach can provide information on local potentials of renewable energy resources, as well as renewable energy development alternatives at the municipal level. They can be used in the interactive dialogue for the municipal renewable energy planning process, to help to fulfill the municipality’s post-earthquake energy developmental vision.

  16. GIS-based approach for optimized siting of municipal solid waste landfill

    International Nuclear Information System (INIS)

    Sumathi, V.R.; Natesan, Usha; Sarkar, Chinmoy

    2008-01-01

    The exponential rise in the urban population of the developing countries in the past few decades and the resulting accelerated urbanization phenomenon has brought to the fore the necessity to develop environmentally sustainable and efficient waste management systems. Sanitary landfill constitutes one of the primary methods of municipal solid waste disposal. Optimized siting decisions have gained considerable importance in order to ensure minimum damage to the various environmental sub-components as well as reduce the stigma associated with the residents living in its vicinity, thereby enhancing the overall sustainability associated with the life cycle of a landfill. This paper addresses the siting of a new landfill using a multi-criteria decision analysis (MCDA) and overlay analysis using a geographic information system (GIS). The proposed system can accommodate new information on the landfill site selection by updating its knowledge base. Several factors are considered in the siting process including geology, water supply resources, land use, sensitive sites, air quality and groundwater quality. Weightings were assigned to each criterion depending upon their relative importance and ratings in accordance with the relative magnitude of impact. The results from testing the system using different sites show the effectiveness of the system in the selection process

  17. Wind Energy Based Electric Vehicle Charging Stations Sitting. A GIS/Wind Resource Assessment Approach

    Directory of Open Access Journals (Sweden)

    George Xydis

    2015-11-01

    Full Text Available The transportation sector is severely correlated with major problems in environment, citizens’ health, climate and economy. Issues such as traffic, fuel cost and parking space have make life more difficult, especially in the dense urban environment. Thus, there is a great need for the development of the electric vehicle (EV sector. The number of cars in cities has increased so much that the current transportation system (roads, parking places, traffic lights, etc. cannot accommodate them properly. The increasing number of vehicles does not affect only humans but also the environment, through air and noise pollution. According to EPA, the 39.2% of total gas emissions in 2007 was caused by transportation activities. Studies have shown that the pollutants are not only gathered in the major roads and/or highways but can travel depending on the meteorological conditions leading to generic pollution. The promotion of EVs and the charging stations are both equally required to be further developed in order EVs to move out of the cities and finally confront the range problem. In this work, a wind resource and a GIS analysis optimizes in a wider area the sitting of wind based charging stations and proposes an optimizing methodology.

  18. GIS-based approach for quantifying landscape connectivity of Javan Hawk-Eagle habitat

    Science.gov (United States)

    Nurfatimah, C.; Syartinilia; Mulyani, Y. A.

    2018-05-01

    Javan Hawk-Eagle (Nisaetus bartelsi; JHE) is a law-protected endemic raptor which currently faced the decreased in number and size of habitat patches that will lead to patch isolation and species extinction. This study assessed the degree of connectivity between remnant habitat patches in central part of Java by utilizing Conefor Sensinode software as an additional tool for ArcGIS. The connectivity index was determined by three fractions which are infra, flux and connector. Using connectivity indices successfully identified 4 patches as core habitat, 9 patches as stepping-stone habitat and 6 patches as isolated habitat were derived from those connectivity indices. Those patches then being validated with land cover map derived from Landsat 8 of August 2014. 36% of core habitat covered by natural forest, meanwhile stepping stone habitat has 55% natural forest and isolated habitat covered by 59% natural forest. Isolated patches were caused by zero connectivity (PCcon = 0) and the patch size which too small to support viable JHE population. Yet, the condition of natural forest and the surrounding matrix landscape in isolated patches actually support the habitat need. Thus, it is very important to conduct the right conservation management system based on the condition of each patches.

  19. A GIS-based approach for the screening assessment of noise and vibration impacts from transit projects.

    Science.gov (United States)

    Hamed, Maged; Effat, Waleed

    2007-08-01

    Urban transportation projects are essential in increasing the efficiency of moving people and goods within a city, and between cities. Environmental impacts from such projects must be evaluated and mitigated, as applicable. Spatial modeling is a valuable tool for quantifying the potential level of environmental consequences within the context of an environmental impact assessment (EIA) study. This paper presents a GIS-based tool for the assessment of airborne-noise and ground-borne vibration from public transit systems, and its application to an actual project. The tool is based on the US Federal Transit Administration's (FTA) approach, and incorporates spatial information, satellite imaging, geostatistical modeling, and software programming. The tool is applied on a case study of initial environmental evaluation of a light rail transit project in an urban city in the Middle East, to evaluate alternative layouts. The tool readily allowed the alternative evaluation and the results were used as input to a multi-criteria analytic framework.

  20. Burden of disease attributed to ambient air pollution in Thailand: A GIS-based approach.

    Directory of Open Access Journals (Sweden)

    Chayut Pinichka

    Full Text Available Growing urbanisation and population requiring enhanced electricity generation as well as the increasing numbers of fossil fuel in Thailand pose important challenges to air quality management which impacts on the health of the population. Mortality attributed to ambient air pollution is one of the sustainable development goals (SDGs. We estimated the spatial pattern of mortality burden attributable to selected ambient air pollution in 2009 based on the empirical evidence in Thailand.We estimated the burden of disease attributable to ambient air pollution based on the comparative risk assessment (CRA framework developed by the World Health Organization (WHO and the Global Burden of Disease study (GBD. We integrated geographical information systems (GIS-based exposure assessments into spatial interpolation models to estimate ambient air pollutant concentrations, the population distribution of exposure and the concentration-response (CR relationship to quantify ambient air pollution exposure and associated mortality. We obtained air quality data from the Pollution Control Department (PCD of Thailand surface air pollution monitoring network sources and estimated the CR relationship between relative risk (RR and concentration of air pollutants from the epidemiological literature.We estimated 650-38,410 ambient air pollution-related fatalities and 160-5,982 fatalities that could have been avoided with a 20 reduction in ambient air pollutant concentrations. The summation of population-attributable fraction (PAF of the disease burden for all-causes mortality in adults due to NO2 and PM2.5 were the highest among all air pollutants at 10% and 7.5%, respectively. The PAF summation of PM2.5 for lung cancer and cardiovascular disease were 16.8% and 14.6% respectively and the PAF summations of mortality attributable to PM10 was 3.4% for all-causes mortality, 1.7% for respiratory and 3.8% for cardiovascular mortality, while the PAF summation of mortality

  1. Burden of disease attributed to ambient air pollution in Thailand: A GIS-based approach.

    Science.gov (United States)

    Pinichka, Chayut; Makka, Nuttapat; Sukkumnoed, Decharut; Chariyalertsak, Suwat; Inchai, Puchong; Bundhamcharoen, Kanitta

    2017-01-01

    Growing urbanisation and population requiring enhanced electricity generation as well as the increasing numbers of fossil fuel in Thailand pose important challenges to air quality management which impacts on the health of the population. Mortality attributed to ambient air pollution is one of the sustainable development goals (SDGs). We estimated the spatial pattern of mortality burden attributable to selected ambient air pollution in 2009 based on the empirical evidence in Thailand. We estimated the burden of disease attributable to ambient air pollution based on the comparative risk assessment (CRA) framework developed by the World Health Organization (WHO) and the Global Burden of Disease study (GBD). We integrated geographical information systems (GIS)-based exposure assessments into spatial interpolation models to estimate ambient air pollutant concentrations, the population distribution of exposure and the concentration-response (CR) relationship to quantify ambient air pollution exposure and associated mortality. We obtained air quality data from the Pollution Control Department (PCD) of Thailand surface air pollution monitoring network sources and estimated the CR relationship between relative risk (RR) and concentration of air pollutants from the epidemiological literature. We estimated 650-38,410 ambient air pollution-related fatalities and 160-5,982 fatalities that could have been avoided with a 20 reduction in ambient air pollutant concentrations. The summation of population-attributable fraction (PAF) of the disease burden for all-causes mortality in adults due to NO2 and PM2.5 were the highest among all air pollutants at 10% and 7.5%, respectively. The PAF summation of PM2.5 for lung cancer and cardiovascular disease were 16.8% and 14.6% respectively and the PAF summations of mortality attributable to PM10 was 3.4% for all-causes mortality, 1.7% for respiratory and 3.8% for cardiovascular mortality, while the PAF summation of mortality attributable to

  2. Quantifying the performance of automated GIS-based geomorphological approaches for riparian zone delineation using digital elevation models

    Directory of Open Access Journals (Sweden)

    D. Fernández

    2012-10-01

    Full Text Available Riparian zone delineation is a central issue for managing rivers and adjacent areas; however, criteria used to delineate them are still under debate. The area inundated by a 50-yr flood has been indicated as an optimal hydrological descriptor for riparian areas. This detailed hydrological information is usually only available for populated areas at risk of flooding. In this work we created several floodplain surfaces by means of two different GIS-based geomorphological approaches using digital elevation models (DEMs, in an attempt to find hydrologically meaningful potential riparian zones for river networks at the river basin scale. Objective quantification of the performance of the two geomorphologic models is provided by analysing coinciding and exceeding areas with respect to the 50-yr flood surface in different river geomorphological types.

  3. Development and application of GIS-based PRISM integration through a plugin approach

    Science.gov (United States)

    Lee, Woo-Seop; Chun, Jong Ahn; Kang, Kwangmin

    2014-05-01

    A PRISM (Parameter-elevation Regressions on Independent Slopes Model) QGIS-plugin was developed on Quantum GIS platform in this study. This Quantum GIS plugin system provides user-friendly graphic user interfaces (GUIs) so that users can obtain gridded meteorological data of high resolutions (1 km × 1 km). Also, this software is designed to run on a personal computer so that it does not require an internet access or a sophisticated computer system. This module is a user-friendly system that a user can generate PRISM data with ease. The proposed PRISM QGIS-plugin is a hybrid statistical-geographic model system that uses coarse resolution datasets (APHRODITE datasets in this study) with digital elevation data to generate the fine-resolution gridded precipitation. To validate the performance of the software, Prek Thnot River Basin in Kandal, Cambodia is selected for application. Overall statistical analysis shows promising outputs generated by the proposed plugin. Error measures such as RMSE (Root Mean Square Error) and MAPE (Mean Absolute Percentage Error) were used to evaluate the performance of the developed PRISM QGIS-plugin. Evaluation results using RMSE and MAPE were 2.76 mm and 4.2%, respectively. This study suggested that the plugin can be used to generate high resolution precipitation datasets for hydrological and climatological studies at a watershed where observed weather datasets are limited.

  4. A GIS based approach for the prediction of the dam break flood hazard – A case study of Zardezas reservoir “Skikda, Algeria”

    Directory of Open Access Journals (Sweden)

    Derdous Oussama

    2015-12-01

    Full Text Available The construction of dams in rivers can offer many advantages, however the consequences resulting from their failure could result in major damage, including loss of life and property destruction. To mitigate the threats of dam break it is essential to appreciate the characteristics of the potential flood in realistic manner. In this study an approach based on the integration of hydraulic modelling and GIS has been used to assess the risks resulting from a potential failure of Zardezas dam, a concrete dam located in Skikda, in the North East of Algeria. HEC-GeoRAS within GIS was used to extract geometric information from a digital elevation model and then imported into HEC-RAS. Flow simulation of the dam break was performed using HEC-RAS and results were mapped using the GIS. Finally, a flood hazard map based on water depth and flow velocity maps was created in GIS environment. According to this map the potential failure of Zardezas dam will place a large number in people in danger. The present study has shown that Application of Geographical Information System (GIS techniques in integration with hydraulic modelling can significantly reduce the time and the resources required to forecast potential dam break flood hazard which can play a crucial role in improving both flood disaster management and land use planning downstream of dams.

  5. GIS-based approach for the evaluation of offshore wind power potential for Gujarat

    Science.gov (United States)

    Patel, Dhrumin; Nagababu, Garlapati; Radadia, Nishil; Parsana, Sohil; Sheth, Mohak; Sheth, Nisarg

    2018-05-01

    In the current global scenario, India is increasing its focus towards the methods to enrich the benefits of non-renewable energy sources as much as possible due to their key advantage of having low carbon footprint. India has already emerged as a key global player in on-shore wind energy and to achieve its annual wind energy production demand of 50 GWh, avenues other than current options have been researched on. Offshore wind energy has experienced remarkable growth worldwide but has not yet been harnessed sufficiently in India, despite addressing many of environmental and economic concerns. The present study focuses on offshore wind resource assessment on Indian exclusive economic zone (EEZ) around Gujarat region. The geographical information system (GIS) methodology has been used to develop maps of wind speed, power density and capacity factor maps. Further, careful consideration has been accorded for expulsion of marine protected areas, shipping transportation lines, fishing zones, and migratory bird movements. The resultant available area has been considered for annual energy production considering data from Siemens Wind Turbine 3.6. The results obtained shows that offshore wind energy can offset twice the annual energy demand of entire country with a potential energy production of more than 2580 TWh.

  6. The study of metal contamination in urban soils of Hong Kong using a GIS-based approach

    International Nuclear Information System (INIS)

    Li Xiangdong; Lee Siulan; Wong Szechung; Shi Wenzhong; Thornton, Iain

    2004-01-01

    The study of regional variations and the anthropogenic contamination by metals of soils is very important for environmental planning and monitoring in urban areas. An extensive survey was conducted in the highly urbanized Kowloon area (46.9 km 2 ) of Hong Kong, using a systematic sampling strategy with a sampling density of 3-5 composite soil samples (0-15 cm) per km 2 . Geochemical maps of 'total' metals (Cd, Cr, Cu, Ni, Pb and Zn) from strong acid extraction in the surface soils were produced based on geographical information system (GIS) technology. A significant spatial relationship was found for Ni, Cu, Pb and Zn in the soils using a GIS-based analysis, suggesting that these metal contaminants in the soils of the Kowloon area had common sources. Several hot-spot areas of metal contamination were identified from the composite metal geochemical map, mainly in the old industrial and residential areas. A further GIS analysis revealed that road junctions, major roads and industrial buildings were possible sources of heavy metals in the urban soils. The Pb isotope composition of the contaminated soils showed clear anthropogenic origins. - GIS can be used to identify soil contamination hot-spot areas and to assess potential pollutant sources in an urban community

  7. GIS based approach for atmospheric carbon absorption strategies through forests development in Indian situations

    International Nuclear Information System (INIS)

    Yadav, Surendra Kumar

    2013-01-01

    Geographical information system (GIS) play important role in forest management. An effective strategy for enhancement of atmospheric carbon absorption productivity is through forests development in degraded forest areas and waste lands. Forestry sector has significant emissions removal capability which can further be enhanced by operationalizing major afforestation and reforestation initiatives like National Mission for a Green India besides continued strengthening of the present protection regime of forests. Secondary data was collected and analyzed. Different types of waste lands require different strategies for their development into forest areas; but few waste lands like rocky regions, glacier regions etc. cannot be developed into forest areas. Atmospheric carbon management is major problem before world community in present circumstances to control environmental pollution. Various forest ecosystems play significant role in carbon absorption. The diffusional net absorption rate of anthropogenic carbon to the biosphere is some unknown function of the atmospheric partial pressure of carbon dioxide. Estimations reveal that the average carbon absorption of the forests was around 1,240 grams (1.240 Kg) of carbon per square meter of canopy area. To stabilize atmospheric CO 2 , role of forestry depends on harvesting and disturbance rates, expectations of future forest productivity, and the ability to deploy technology and forest practices to increase the retention of sequestered CO 2 . There is a considerable self-damping effect that will moderate the future increase of the atmospheric carbon dioxide concentration. Capacity of the ocean to absorb carbon dioxide is limited; but atmospheric carbon absorption potentiality of India forests can be increased tremendously through reforestation, afforestation and development of degraded forest areas and waste lands. About 60 % of Indian waste lands can be developed to increase forest cover with reasonable efforts. When

  8. GIS based approach for atmospheric carbon absorption strategies through forests development in Indian situations

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, Surendra Kumar [CCS Univ., Meerut (India). SCRIET

    2013-07-01

    Geographical information system (GIS) play important role in forest management. An effective strategy for enhancement of atmospheric carbon absorption productivity is through forests development in degraded forest areas and waste lands. Forestry sector has significant emissions removal capability which can further be enhanced by operationalizing major afforestation and reforestation initiatives like National Mission for a Green India besides continued strengthening of the present protection regime of forests. Secondary data was collected and analyzed. Different types of waste lands require different strategies for their development into forest areas; but few waste lands like rocky regions, glacier regions etc. cannot be developed into forest areas. Atmospheric carbon management is major problem before world community in present circumstances to control environmental pollution. Various forest ecosystems play significant role in carbon absorption. The diffusional net absorption rate of anthropogenic carbon to the biosphere is some unknown function of the atmospheric partial pressure of carbon dioxide. Estimations reveal that the average carbon absorption of the forests was around 1,240 grams (1.240 Kg) of carbon per square meter of canopy area. To stabilize atmospheric CO{sub 2}, role of forestry depends on harvesting and disturbance rates, expectations of future forest productivity, and the ability to deploy technology and forest practices to increase the retention of sequestered CO{sub 2}. There is a considerable self-damping effect that will moderate the future increase of the atmospheric carbon dioxide concentration. Capacity of the ocean to absorb carbon dioxide is limited; but atmospheric carbon absorption potentiality of India forests can be increased tremendously through reforestation, afforestation and development of degraded forest areas and waste lands. About 60 % of Indian waste lands can be developed to increase forest cover with reasonable efforts. When

  9. A GIS-based integrative approach for land use optimization in a semi-arid watershed

    Directory of Open Access Journals (Sweden)

    S.M. Tajbakhsh

    2018-01-01

    Full Text Available The proper use of natural resources can preserve these valuable assets. In line with the management of natural resources, land use optimization can be highly useful. The aim of the present study is to propose an appropriate integrative model for optimized allocation of lands for surface runoff and sediment load minimization and net income maximization in Bayg watershed, Iran. In this study, five categories of land uses, i.e. irrigated orchard, rangeland, irrigated farming, rainfed farming and almond orchard were spatially optimized to minimize surface runoff and sediment yield and to increase net income by integrating three approaches: weighted goal programming, analytic hierarchy process and multi-objective land allocation algorithm. To achieve the target levels in this work, the acreages of almond orchard and rainfed farming should be reduced by 100% and 37.32% respectively, and irrigated farming acreage should be increased by 138.53%. Through these alterations in the land use acreage, the sediment load will be reduced by 16.78% and net income will be improved by 72.52%. However, runoff volume will be increased by 0.22%. Results indicated that weighted goal programming satisfied 96% and 46% of the target levels of sediment load and net income respectively, but failed to reduce runoff volume. Therefore, it is necessary for managers to control runoff using the strategies related to runoff harvesting, especially on steep slopes. Generally, it can be concluded that a combination of the techniques weighted goal programming, analytic hierarchy process and multi-objective land allocation is highly capable to optimize land use and land covers based on the conflicting objectives.

  10. Estimation of exposure to fine particulate air pollution using GIS-based modeling approach in an urban area in Tehran

    Directory of Open Access Journals (Sweden)

    M. Memarianfard

    2016-10-01

    Full Text Available In many industrialized areas, the highest concentration of particulate matter, as a major concern on public health, is being felt worldwide problem. Since the air pollution assessment and its evaluation with considering spatial dispersion analysis because of various factors are complex, in this paper, GIS-based modeling approach was utilized to zoning PM2.5 dispersion over Tehran, during one year, from 21 March 2014 to 20 March 2015. The RBF method was applied to obtain the zoning maps and determining the highest concentration of PM2.5 in the 22 Tehran’s regions for each season. The RMSEmin values according to the number of neighbors and types of functions in the radial basis function method, including completely regularized spline, Spline with tension, Multiquadric function, Inverse multiquadric function, and Thin-plate spline  for each month have been assessed. By performing analysis on the errors, the numbers of neighbors were estimated. The numbers of neighbors in the model for each function were varied from 2 to 30. The results indicate that the models with 3 and 4 neighbors have the best performance with the lowest RMSE values with using RBF method. The highest PM2.5 concentrations have been occurred in the summer and winter especially at the center, south, and in some cases at northeast of the city.

  11. Quantifying the performance of automated GIS-based geomorphological approaches for riparian zone delineation using digital elevation models

    OpenAIRE

    D. Fernández; J. Barquín; M. Álvarez-Cabria; F. J. Peñas

    2012-01-01

    Riparian zone delineation is a central issue for managing rivers and adjacent areas; however, criteria used to delineate them are still under debate. The area inundated by a 50-yr flood has been indicated as an optimal hydrological descriptor for riparian areas. This detailed hydrological information is usually only available for populated areas at risk of flooding. In this work we created several floodplain surfaces by means of two different GIS-based geomorphological appro...

  12. Modelling domestic stock energy use and heat-related health risk : a GIS-based bottom-up modelling approach

    Energy Technology Data Exchange (ETDEWEB)

    Mavrogianni, A.; Davies, M. [Univ. College London, London (United Kingdom). Bartlett School of Graduate Studies; Chalabi, Z.; Wilkinson, P. [London School of Hygiene and Tropical Medecine, London (United Kingdom); Kolokotroni, M. [Brunel Univ., London (United Kingdom). School of Engineering Design

    2009-07-01

    Approximately 8 per cent of the carbon dioxide (CO{sub 2}) emissions produced in the United Kingdom are produced in London, one of the fastest growing cities worldwide. Based on the projected rates of population and economic growth, a 15 per cent increase of emissions is predicted. In addition to the national target to cut emissions by 80 per cent by 2050, the Mayor of London Climate Change Action Plan set a target to reduce London's CO{sub 2} emissions by 60 per cent by 2025. Significant carbon savings can be achieved in the building sector, particularly since 38 per cent of the total delivered energy in London is associated with domestic energy use. This paper demonstrated a systematic approach towards exploring the impact of urban built form and the combined effect of climate change and the urban heat island (UHI) phenomenon on the levels of domestic energy consumption and heat-related health risk in London. It presented work in progress on the development of a GIS-based energy consumption model and heat vulnerability index of the Greater London Area domestic stock. Comparison of the model output for 10 case study areas with topdown energy statistics revealed that the model successfully ranks areas based on their domestic space heating demand. The health module can be used to determine environments prone to higher risk of heat stress by investigating urban texture factors. A newly developed epidemiological model will be feed into the health module to examine the influence on risk of heat-related mortality of local urban built form characteristics. The epidemiological model is based on multi-variable analysis of deaths during heat wave and non-heat wave days. 29 refs., 1 tab., 7 figs.

  13. Ambient Ozone Exposure in Czech Forests: A GIS-Based Approach to Spatial Distribution Assessment

    Science.gov (United States)

    Hůnová, I.; Horálek, J.; Schreiberová, M.; Zapletal, M.

    2012-01-01

    Ambient ozone (O3) is an important phytotoxic pollutant, and detailed knowledge of its spatial distribution is becoming increasingly important. The aim of the paper is to compare different spatial interpolation techniques and to recommend the best approach for producing a reliable map for O3 with respect to its phytotoxic potential. For evaluation we used real-time ambient O3 concentrations measured by UV absorbance from 24 Czech rural sites in the 2007 and 2008 vegetation seasons. We considered eleven approaches for spatial interpolation used for the development of maps for mean vegetation season O3 concentrations and the AOT40F exposure index for forests. The uncertainty of maps was assessed by cross-validation analysis. The root mean square error (RMSE) of the map was used as a criterion. Our results indicate that the optimal interpolation approach is linear regression of O3 data and altitude with subsequent interpolation of its residuals by ordinary kriging. The relative uncertainty of the map of O3 mean for the vegetation season is less than 10%, using the optimal method as for both explored years, and this is a very acceptable value. In the case of AOT40F, however, the relative uncertainty of the map is notably worse, reaching nearly 20% in both examined years. PMID:22566757

  14. Groundwater potentiality mapping using geoelectrical-based aquifer hydraulic parameters: A GIS-based multi-criteria decision analysis modeling approach

    Directory of Open Access Journals (Sweden)

    Kehinde Anthony Mogaji Hwee San Lim

    2017-01-01

    Full Text Available This study conducted a robust analysis on acquired 2D resistivity imaging data and borehole pumping test records to optimize groundwater potentiality mapping in Perak province, Malaysia using derived aquifer hydraulic properties. The transverse resistance (TR parameter was determined from the interpreted 2D resistivity imaging data by applying the Dar-Zarrouk parameter equation. Linear regression and GIS techniques were used to regress the estimated values for TR parameters with the aquifer transmissivity values extracted from the geospatially produced BPT records-based aquifer transmissivity map to develop the aquifer transmissivity parameter predictive (ATPP model. The reliability evaluated ATPP model using the Theil inequality coefficient measurement approach was used to establish geoelectrical-based hydraulic parameters (GHP modeling equations for the modeling of transmissivity (Tr, hydraulic conductivity (K, storativity (St, and hydraulic diffusivity (D properties. The applied GHP modeling equation results to the delineated aquifer media was used to produce aquifer potential conditioning factor maps for Tr, K, St, and D. The maps were modeled to develop an aquifer potential mapping index (APMI model via applying the multi-criteria decision analysis-analytic hierarchy process principle. The area groundwater reservoir productivity potential model map produced based on the processed APMI model estimates in the GIS environment was found to be 71% accurate. This study establishes a good alternative approach to determine aquifer hydraulic parameters even in areas where pumping test information is unavailable using a cost effective geophysical data. The produced map can be explored for hydrological decision making.

  15. ADOPTING THE PROBLEM BASED LEARNING APPROACH IN A GIS PROJECT MANAGEMENT CLASS

    Science.gov (United States)

    Problem Based Learning (PBL) is a process that emphasizes the need for developing problem solving skills through hands-on project formulation and management. A class adopting the PBL method provides students with an environment to acquire necessary knowledge to encounter, unders...

  16. Land Suitability and Insurance Premiums: A GIS-based Multicriteria Analysis Approach for Sustainable Rice Production

    Directory of Open Access Journals (Sweden)

    Md Monjurul Islam

    2018-05-01

    Full Text Available The purpose of this research is to develop a land suitability model for rice production based on suitability levels and to propose insurance premiums to obtain maximum returns based on the harvest index and subsidy dependence factor for the marginal and moderately suitable lands in the northern part of Bangladesh. A multicriteria analysis was undertaken and a rice land suitability map was developed using geographical information system and analytical hierarchy process. The analysis identified that 22.74% of the area was highly suitable, while 14.86% was marginally suitable, and 28.54% was moderately suitable for rice production. However, 32.67% of the area, which was occupied by water bodies, rivers, forests, and settlements, is permanently not suitable; 1.19% is presently not suitable. To motivate low-quality land owners to produce rice, there is no alternative but to provide protection through crop insurance. We suggest producing rice up to marginally suitable lands to obtain support from insurance. The minimum coverage is marginal coverage (70% to cover the production costs, while the maximum coverage is high coverage (90% to enable a maximum return. This new crop insurance model, based on land suitability can be a rational support for owners of different quality land to increase production.

  17. Assessment of vulnerability zones for ground water pollution using GIS-DRASTIC-EC model: A field-based approach

    Science.gov (United States)

    Anantha Rao, D.; Naik, Pradeep K.; Jain, Sunil K.; Vinod Kumar, K.; Dhanamjaya Rao, E. N.

    2018-06-01

    Assessment of groundwater vulnerability to pollution is an essential pre-requisite for better planning of an area. We present the groundwater vulnerability assessment in parts of the Yamuna Nagar District, Haryana State, India in an area of about 800 km2, considered to be a freshwater zone in the foothills of the Siwalik Hill Ranges. Such areas in the Lower Himalayas form good groundwater recharge zones, and should always be free from contamination. But, the administration has been trying to promote industrialization along these foothill zones without actually assessing the environmental consequences such activities may invite in the future. GIS-DRASTIC model has been used with field based data inputs for studying the vulnerability assessment. But, we find that inclusion electrical conductivity (EC) as a model parameter makes it more robust. Therefore, we rename it as GIS-DRASTIC-EC model. The model identifies three vulnerability zones such as low, moderate and high with an areal extent of 5%, 80% and 15%, respectively. On the basis of major chemical parameters alone, the groundwater in the foothill zones apparently looks safe, but analysis with the help of GIS-DRASTIC-EC model gives a better perspective of the groundwater quality in terms of identifying the vulnerable areas.

  18. Assessment of ecological passages along road networks within the Mediterranean forest using GIS-based multi criteria evaluation approach.

    Science.gov (United States)

    Gülci, Sercan; Akay, Abdullah Emin

    2015-12-01

    Major roads cause barrier effect and fragmentation on wildlife habitats that are suitable places for feeding, mating, socializing, and hiding. Due to wildlife collisions (Wc), human-wildlife conflicts result in lost lives and loss of biodiversity. Geographical information system (GIS)-based multi criteria evaluation (MCE) methods have been successfully used in short-term planning of road networks considering wild animals. Recently, wildlife passages have been effectively utilized as road engineering structures provide quick and certain solutions for traffic safety and wildlife conservation problems. GIS-based MCE methods provide decision makers with optimum location for ecological passages based on habitat suitability models (HSMs) that classify the areas based on ecological requirements of target species. In this study, ecological passages along Motorway 52 within forested areas in Mediterranean city of Osmaniye in Turkey were evaluated. Firstly, HSM coupled with nine eco-geographic decision variables were developed based on ecological requirements of roe deer (Capreolus capreolus) that were chosen as target species. Then specified decision variables were evaluated using GIS-based weighted linear combination (WLC) method to estimate movement corridors and mitigation points along the motorway. In the solution process, two linkage nodes were evaluated for eco-passages which were determined based on the least-cost movement corridor intersecting with the motorway. One of the passages was identified as a natural wildlife overpass while the other was suggested as underpass construction. The results indicated that computer-based models provide accurate and quick solutions for positioning ecological passages to reduce environmental effects of road networks on wild animals.

  19. Multi-hazard risk assessment of coastal vulnerability from tropical cyclones - A GIS based approach for the Odisha coast.

    Science.gov (United States)

    Sahoo, Bishnupriya; Bhaskaran, Prasad K

    2018-01-15

    The coastal region bordering the East coast of India is a thickly populated belt exposed to high risk and vulnerability from natural hazards such as tropical cyclones. Tropical cyclone frequencies that develop over the Bay of Bengal (average of 5-6 per year) region are much higher as compared to the Arabian Sea thereby posing a high risk factor associated with storm surge, inland inundation, wind gust, intense rainfall, etc. The Odisha State in the East coast of India experiences the highest number of cyclone strikes as compared to West Bengal, Andhra Pradesh, and Tamil Nadu. To express the destructive potential resulting from tropical cyclones the Power Dissipation Index (PDI) is a widely used metric globally. A recent study indicates that PDI for cyclones in the present decade have increased about six times as compared to the past. Hence there is a need to precisely ascertain the coastal vulnerability and risk factors associated with high intense cyclones expected in a changing climate. As such there are no comprehensive studies attempted so far on the determination of Coastal Vulnerability Index (CVI) for Odisha coast that is highly prone to cyclone strikes. With this motivation, the present study makes an attempt to investigate the physical, environmental, social, and economic impacts on coastal vulnerability associated with tropical cyclones for the Odisha coast. The study also investigates the futuristic projection of coastal vulnerability over this region expected in a changing climate scenario. Eight fair weather parameters along with storm surge height and onshore inundation were used to estimate the Physical Vulnerability Index (PVI). Thereafter, the PVI along with social, economic, and environmental vulnerability was used to determine the overall CVI using the GIS based approach. The authors believe that the comprehensive nature of this study is expected to benefit coastal zone management authorities. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. GIS based Grid overlay method versus modeling approach – A comparative study for landslide hazard zonation (LHZ in Meta Robi District of West Showa Zone in Ethiopia

    Directory of Open Access Journals (Sweden)

    Tarun Kumar Raghuvanshi

    2015-12-01

    Full Text Available The present study area is located in Meta Robi District of West Showa Zone in Oromiya Regional State in Ethiopia. The main objective of the present study was to evaluate landslide hazard zonation (LHZ by utilizing ‘Grid overlay’ and ‘GIS modeling’ approaches. Also, it was attempted to know the effectiveness of the two methods. The methodology followed was based on the analysis of past landslides in the area. For the present study six causative factors namely; slope material, slope, aspect, elevation, land use and land cover and groundwater surface traces were considered. Later, Landslide Susceptibility Index (LSI was computed based on the relative influence of causative factors on past landslides. For the ‘Grid overlay’ method a grid with cells 10 m by 10 m was overlaid over the study area and later it was geo-processed to delineate various sub-classes of each causative factor. LSI values were assigned to each sub-causative factor within each grid cell and a ‘Total Landslide Susceptibility Index’ was calculated to produce the LHZ map. For ‘GIS modeling’ the same causative factors and similar LSI values were utilized. In the case of LHZ map prepared by the ‘Grid overlay’ method about 82% of past landslides fall within ‘very high hazard’ or ‘high hazard’ zones whereas in the case of ‘GIS modeling’ about 95% of past landslides fall within ‘very high hazard’ or ‘high hazard’ zones. Finally, the validation showed that ‘GIS modeling’ produced better LHZ map. Also, ‘Grid overlay’ method is more tedious and time consuming as compared to GIS modeling.

  1. Study on integrated approach of Nuclear Accident Hazard Predicting, Warning, and Optimized Controlling System based on GIS

    International Nuclear Information System (INIS)

    Tang Lijuan; Huang Shunxiang; Wang Xinming

    2012-01-01

    The issue of nuclear safety becomes the attention focus of international society after the nuclear accident happened in Fukushima. Aiming at the requirements of the prevention and controlling of Nuclear Accident establishment of Nuclear Accident Hazard Predicting, Warning and optimized Controlling System (NAPWS) is a imperative project that our country and army are desiderating, which includes multiple fields of subject as nuclear physics, atmospheric science, security science, computer science and geographical information technology, etc. Multiplatform, multi-system and multi-mode are integrated effectively based on GIS, accordingly the Predicting, Warning, and Optimized Controlling technology System of Nuclear Accident Hazard is established. (authors)

  2. Quantitative X-ray Map Analyser (Q-XRMA): A new GIS-based statistical approach to Mineral Image Analysis

    Science.gov (United States)

    Ortolano, Gaetano; Visalli, Roberto; Godard, Gaston; Cirrincione, Rosolino

    2018-06-01

    We present a new ArcGIS®-based tool developed in the Python programming language for calibrating EDS/WDS X-ray element maps, with the aim of acquiring quantitative information of petrological interest. The calibration procedure is based on a multiple linear regression technique that takes into account interdependence among elements and is constrained by the stoichiometry of minerals. The procedure requires an appropriate number of spot analyses for use as internal standards and provides several test indexes for a rapid check of calibration accuracy. The code is based on an earlier image-processing tool designed primarily for classifying minerals in X-ray element maps; the original Python code has now been enhanced to yield calibrated maps of mineral end-members or the chemical parameters of each classified mineral. The semi-automated procedure can be used to extract a dataset that is automatically stored within queryable tables. As a case study, the software was applied to an amphibolite-facies garnet-bearing micaschist. The calibrated images obtained for both anhydrous (i.e., garnet and plagioclase) and hydrous (i.e., biotite) phases show a good fit with corresponding electron microprobe analyses. This new GIS-based tool package can thus find useful application in petrology and materials science research. Moreover, the huge quantity of data extracted opens new opportunities for the development of a thin-section microchemical database that, using a GIS platform, can be linked with other major global geoscience databases.

  3. A GIS-based multi-source and multi-box modeling approach (GMSMB) for air pollution assessment--a North American case study.

    Science.gov (United States)

    Wang, Bao-Zhen; Chen, Zhi

    2013-01-01

    This article presents a GIS-based multi-source and multi-box modeling approach (GMSMB) to predict the spatial concentration distributions of airborne pollutant on local and regional scales. In this method, an extended multi-box model combined with a multi-source and multi-grid Gaussian model are developed within the GIS framework to examine the contributions from both point- and area-source emissions. By using GIS, a large amount of data including emission sources, air quality monitoring, meteorological data, and spatial location information required for air quality modeling are brought into an integrated modeling environment. It helps more details of spatial variation in source distribution and meteorological condition to be quantitatively analyzed. The developed modeling approach has been examined to predict the spatial concentration distribution of four air pollutants (CO, NO(2), SO(2) and PM(2.5)) for the State of California. The modeling results are compared with the monitoring data. Good agreement is acquired which demonstrated that the developed modeling approach could deliver an effective air pollution assessment on both regional and local scales to support air pollution control and management planning.

  4. Using a VGI and GIS-Based Multicriteria Approach for Assessing the Potential of Rural Tourism in Extremadura (Spain

    Directory of Open Access Journals (Sweden)

    Abel González-Ramiro

    2016-11-01

    Full Text Available Extremadura (Spain, being one of the less-developed EU regions, is also eligible for European funds, including those related with the development of tourism activities in rural areas. To assess the spatial distribution of rural tourism potential (RTP, a methodological approach was followed by combining the synergetic use of geographic information systems (GIS and the analytical hierarchical process (AHP. For the evaluation model, six factors were examined and hierarchized by a panel of eighteen experts: tourism accommodation offer, activities in natural areas, gastronomic offer, cultural activities, bath offer in natural environments, and activities in active tourism. These factors were then decomposed into thirty-two evaluation criteria and the relative importance of their weights was estimated using pairwise judgments. Using publicly available data and volunteered geographic information (VGI platforms, the related spatial and non-spatial data were collected, collated, and standardized, employing appropriate tools developed with open-source GIS software. The results, represented by a series of intensity maps, indicate the RTP scores, highlight the strengths and weaknesses in each county, and could serve as a planning tool for public and/or private investments.

  5. A GIS-based approach for identifying potential runoff harvesting sites in the Thukela River basin, South Africa

    Science.gov (United States)

    de Winnaar, G.; Jewitt, G. P. W.; Horan, M.

    Water scarce countries such as South Africa are subject to various hydrological constraints which can often be attributed to poor rainfall partitioning, particularly within resource poor farming communities that are reliant on rainfed agriculture. Recent initiatives to address this have shifted focus to explore more efficient alternatives to water supply and the recognition of numerous opportunities to implement runoff harvesting as a means to supplement water availability. However, increasing the implementation of runoff harvesting, without encountering unintended impacts on downstream hydrological and ecological systems, requires better understanding of the hydrologic and environmental impacts at catchment scale. In this paper the representation of spatial variations in landscape characteristics such as soil, land use, rainfall and slope information is shown to be an important step in identifying potential runoff harvesting sites, after which modelling the hydrological response in catchments where extensive runoff harvesting is being considered can be performed and likely impacts assessed. Geographic information systems (GIS) was utilised as an integrating tool to store, analyse and manage spatial information and when linked to hydrological response models, provided a rational means to facilitate decision making by providing catchment level identification, planning and assessment of runoff harvesting sites as illustrated by a case study at the Potshini catchment, a small sub-catchment in the Thukela River basin, South Africa. Through the linked GIS, potential runoff harvesting sites are identified relative to areas that concentrate runoff and where the stored water will be appropriately distributed. Based on GIS analysis it was found that 17% percent of the Potshini catchment area has a high potential for generating surface runoff, whereas an analysis of all factors which influence the location of such systems, shows that 18% is highly suitable for runoff

  6. Teaching Thousands with Cloud-based GIS

    Science.gov (United States)

    Gould, Michael; DiBiase, David; Beale, Linda

    2016-04-01

    Teaching Thousands with Cloud-based GIS Educators often draw a distinction between "teaching about GIS" and "teaching with GIS." Teaching about GIS involves helping students learn what GIS is, what it does, and how it works. On the other hand, teaching with GIS involves using the technology as a means to achieve education objectives in the sciences, social sciences, professional disciplines like engineering and planning, and even the humanities. The same distinction applies to CyberGIS. Understandably, early efforts to develop CyberGIS curricula and educational resources tend to be concerned primarily with CyberGIS itself. However, if CyberGIS becomes as functional, usable and scalable as it aspires to be, teaching with CyberGIS has the potential to enable large and diverse global audiences to perform spatial analysis using hosted data, mapping and analysis services all running in the cloud. Early examples of teaching tens of thousands of students across the globe with cloud-based GIS include the massive open online courses (MOOCs) offered by Penn State University and others, as well as the series of MOOCs more recently developed and offered by Esri. In each case, ArcGIS Online was used to help students achieve educational objectives in subjects like business, geodesign, geospatial intelligence, and spatial analysis, as well as mapping. Feedback from the more than 100,000 total student participants to date, as well as from the educators and staff who supported these offerings, suggest that online education with cloud-based GIS is scalable to very large audiences. Lessons learned from the course design, development, and delivery of these early examples may be useful in informing the continuing development of CyberGIS education. While MOOCs may have passed the peak of their "hype cycle" in higher education, the phenomenon they revealed persists: namely, a global mass market of educated young adults who turn to free online education to expand their horizons. The

  7. Delineation of Suitable Cropland Areas Using a GIS Based Multi-Criteria Evaluation Approach in the Tam Dao National Park Region, Vietnam

    Directory of Open Access Journals (Sweden)

    Duong Dang Khoi

    2010-07-01

    Full Text Available Land degradation is recognized as one of the major threats to the buffer zones of protected areas (PAs in Vietnam. In particular, the expansion of land degradation into the PAs is exerting pressure on biodiversity conservation efforts. This degradation is partially the result of mismanagement: the utilization of the land is often unmatched with the inherent suitability of the land. Identification of the spatial distribution of suitable areas for cropland is essential for sustainable land-use recommendation. This paper aims to delineate the areas suitable for cropland in the Tam Dao National Park (TDNP region using a GIS-based multi-criteria evaluation of biophysical factors and Landsat ETM+ imagery. GIS is used to generate the factors, while MCE is used to aggregate them into a land suitability index. The results indicate the location and extent of crop farming areas at different suitability levels, i.e., most suitable (28.10%, moderately suitable (23.96%, marginally suitable (28.77%, and least suitable (19.17%. The current cropland covers 46.5% of the study area, while most and moderately suitable areas are estimated to be 52.06% of the territory. The results can be used to identify priority areas for crop farming and sustainable land-use management. The GIS-MCE approach provides an effective assessment tool for land-use managers working in protected areas of Vietnam.

  8. Three-dimensional GIS approach for management of assets

    Science.gov (United States)

    Lee, S. Y.; Yee, S. X.; Majid, Z.; Setan, H.

    2014-02-01

    Assets play an important role in human life, especially to an organization. Organizations strive and put more effort to improve its operation and assets management. The development of GIS technology has become a powerful tool in management as it is able to provide a complete inventory for managing assets with location-based information. Spatial information is one of the requirements in decision making in various areas, including asset management in the buildings. This paper describes a 3D GIS approach for management of assets. An asset management system was developed by integrating GIS concept and 3D model assets. The purposes of 3D visualization to manage assets are to facilitate the analysis and understanding in the complex environment. Behind the 3D model of assets is a database to store the asset information. A user-friendly interface was also designed for more easier to operate the application. In the application developed, location of each individual asset can be easily tracked according to the referring spatial information and 3D viewing. The 3D GIS approach described in this paper is certainly would be useful in asset management. Systematic management of assets can be carried out and this will lead to less-time consuming and cost-effective. The results in this paper will show a new approach to improve asset management.

  9. Three-dimensional GIS approach for management of assets

    International Nuclear Information System (INIS)

    Lee, S Y; Yee, S X; Majid, Z; Setan, H

    2014-01-01

    Assets play an important role in human life, especially to an organization. Organizations strive and put more effort to improve its operation and assets management. The development of GIS technology has become a powerful tool in management as it is able to provide a complete inventory for managing assets with location-based information. Spatial information is one of the requirements in decision making in various areas, including asset management in the buildings. This paper describes a 3D GIS approach for management of assets. An asset management system was developed by integrating GIS concept and 3D model assets. The purposes of 3D visualization to manage assets are to facilitate the analysis and understanding in the complex environment. Behind the 3D model of assets is a database to store the asset information. A user-friendly interface was also designed for more easier to operate the application. In the application developed, location of each individual asset can be easily tracked according to the referring spatial information and 3D viewing. The 3D GIS approach described in this paper is certainly would be useful in asset management. Systematic management of assets can be carried out and this will lead to less-time consuming and cost-effective. The results in this paper will show a new approach to improve asset management

  10. Integrating remote sensing with GIS-based multi-criteria evaluation approach for Karst rocky desertification assessment in Southwest of China

    International Nuclear Information System (INIS)

    Zhang, Z; Xu, W; Zhou, W; Zhang, L; Xiao, Y; Ouyang, Z; Ou, X

    2014-01-01

    The increasing exploitation of Karst resources is leading to severe environmental impacts, as Karst frequently occurs in the most fragile and vulnerable environments. This paper presents a multi-criteria evaluation (MCE) approach in a spatial context to support Karst rocky desertification (KRD) assessment by integrating remote sensing data with GIS. The study area is located in Wenshan Prefecture, Yunnan Province, Southwest of China. Criteria and impact factors for KRD first were identified and weighted through pairwise comparison method. A GIS fuzzy set membership function was then used to generate gradient effects of each criterion, and a clustering method based on K-mean algorithms was used to classify KRD into several descending rank zones (or levels). Both ROC and error matrix assessments indicated that the MCE approach is better than the NDVI approach. In addition, we found it is useful to integrate the topographic and human disturbance factors into KRD mapping and assessment, compared with most of the previous KRD assessment studies mainly focused on developing vegetation or land cover information in karst regions by using remote sensing alone. Furthermore, the integrated MCE approach is robust, flexible, and easy to be implemented. It also explicitly includes the quantitative and qualitative information, for instance, opinions of decision makers and experts as well as characteristics of the landscape

  11. Estimating Hantavirus Risk in Southern Argentina: A GIS-Based Approach Combining Human Cases and Host Distribution

    Science.gov (United States)

    Andreo, Veronica; Neteler, Markus; Rocchini, Duccio; Provensal, Cecilia; Levis, Silvana; Porcasi, Ximena; Rizzoli, Annapaola; Lanfri, Mario; Scavuzzo, Marcelo; Pini, Noemi; Enria, Delia; Polop, Jaime

    2014-01-01

    We use a Species Distribution Modeling (SDM) approach along with Geographic Information Systems (GIS) techniques to examine the potential distribution of hantavirus pulmonary syndrome (HPS) caused by Andes virus (ANDV) in southern Argentina and, more precisely, define and estimate the area with the highest infection probability for humans, through the combination with the distribution map for the competent rodent host (Oligoryzomys longicaudatus). Sites with confirmed cases of HPS in the period 1995–2009 were mostly concentrated in a narrow strip (~90 km × 900 km) along the Andes range from northern Neuquén to central Chubut province. This area is characterized by high mean annual precipitation (~1,000 mm on average), but dry summers (less than 100 mm), very low percentages of bare soil (~10% on average) and low temperatures in the coldest month (minimum average temperature −1.5 °C), as compared to the HPS-free areas, features that coincide with sub-Antarctic forests and shrublands (especially those dominated by the invasive plant Rosa rubiginosa), where rodent host abundances and ANDV prevalences are known to be the highest. Through the combination of predictive distribution maps of the reservoir host and disease cases, we found that the area with the highest probability for HPS to occur overlaps only 28% with the most suitable habitat for O. longicaudatus. With this approach, we made a step forward in the understanding of the risk factors that need to be considered in the forecasting and mapping of risk at the regional/national scale. We propose the implementation and use of thematic maps, such as the one built here, as a basic tool allowing public health authorities to focus surveillance efforts and normally scarce resources for prevention and control actions in vast areas like southern Argentina. PMID:24424500

  12. Estimating Hantavirus Risk in Southern Argentina: A GIS-Based Approach Combining Human Cases and Host Distribution

    Directory of Open Access Journals (Sweden)

    Veronica Andreo

    2014-01-01

    Full Text Available We use a Species Distribution Modeling (SDM approach along with Geographic Information Systems (GIS techniques to examine the potential distribution of hantavirus pulmonary syndrome (HPS caused by Andes virus (ANDV in southern Argentina and, more precisely, define and estimate the area with the highest infection probability for humans, through the combination with the distribution map for the competent rodent host (Oligoryzomys longicaudatus. Sites with confirmed cases of HPS in the period 1995–2009 were mostly concentrated in a narrow strip (~90 km × 900 km along the Andes range from northern Neuquén to central Chubut province. This area is characterized by high mean annual precipitation (~1,000 mm on average, but dry summers (less than 100 mm, very low percentages of bare soil (~10% on average and low temperatures in the coldest month (minimum average temperature −1.5 °C, as compared to the HPS-free areas, features that coincide with sub-Antarctic forests and shrublands (especially those dominated by the invasive plant Rosa rubiginosa, where rodent host abundances and ANDV prevalences are known to be the highest. Through the combination of predictive distribution maps of the reservoir host and disease cases, we found that the area with the highest probability for HPS to occur overlaps only 28% with the most suitable habitat for O. longicaudatus. With this approach, we made a step forward in the understanding of the risk factors that need to be considered in the forecasting and mapping of risk at the regional/national scale. We propose the implementation and use of thematic maps, such as the one built here, as a basic tool allowing public health authorities to focus surveillance efforts and normally scarce resources for prevention and control actions in vast areas like southern Argentina.

  13. Assessing the spatial representability of charcoal and PAH-based paleofire records with integrated GIS, modelling, and empirical approaches

    Science.gov (United States)

    Vachula, R. S.; Huang, Y.; Russell, J. M.

    2017-12-01

    Lake sediment-based fire reconstructions offer paleoenvironmental context in which to assess modern fires and predict future burning. However, despite the ubiquity, many uncertainties remain regarding the taphonomy of paleofire proxies and the spatial scales for which they record variations in fire history. Here we present down-core proxy analyses of polycyclic aromatic hydrocarbons (PAHs) and three size-fractions of charcoal (63-150, >150 and >250 μm) from Swamp Lake, California, an annually laminated lacustrine archive. Using a statewide historical GIS dataset of area burned, we assess the spatial scales for which these proxies are reliable recorders of fire history. We find that the coherence of observed and proxy-recorded fire history inherently depends upon spatial scale. Contrary to conventional thinking that charcoal mainly records local fires, our results indicate that macroscopic charcoal (>150 μm) may record spatially broader (250 μm) may be a more conservative proxy for local burning. We find that sub-macroscopic charcoal particles (63-150 μm) reliably record regional (up to 150 km) changes in fire history. These results indicate that charcoal-based fire reconstructions may represent spatially broader fire history than previously thought, which has major implications for our understanding of spatiotemporal paleofire variations. Our analyses of PAHs show that dispersal mobility is heterogeneous between compounds, but that PAH fluxes are reliable proxies of fire history within 25-50 km, which suggests PAHs may be a better spatially constrained paleofire proxy than sedimentary charcoal. Further, using a linear discriminant analysis model informed by modern emissions analyses, we show that PAH assemblages preserved in lake sediments can differentiate vegetation type burned, and are thus promising paleoecological biomarkers warranting further research and implementation. In sum, our analyses offer new insight into the spatial dimensions of paleofire

  14. A GIS-based approach for the long-term prediction of human health risks at contaminated sites

    NARCIS (Netherlands)

    Bień, J.D.; Meer, J. ter; Rulkens, W.H.; Rijnaarts, H.H.M.

    2005-01-01

    A Health Index/Risk Evaluation Tool (HIRET) has been developed for the integration of risk assessment and spatial planning using GIS capabilities. The method is meant to assist decision makers and site owners in the evaluation of potential human health risk with respect to land use. Human health

  15. A GIS-based approach for the long-term prediction of human health risks at contaminated sites

    NARCIS (Netherlands)

    Bien, J.D.; Meer, J.; Rulkens, W.H.; Rijnaarts, H.H.M.

    2004-01-01

    A Health Index/Risk Evaluation Tool (HIRET) has been developed for the integration of risk assessment and spatial planning using GIS capabilities. The method is meant to assist decision makers and site owners in the evaluation of potential human health risk with respect to land use. Human health

  16. "Championing GIS, Biostatistics, meteo, m-health and e-health approaches for tailored informed evidence-based agricultural, environment and health interventions in Rwanda"

    Science.gov (United States)

    Karame, P., Sr.

    2016-12-01

    "GIS-Biostatistics-Meteo for Health (GBMH), A consolidated approach"The environmental vulnerability rate due to human-induced threats and climate change has exceeded the capacity of ecosystems and species to adapt naturally. Drastic changes in seasonal and weather patterns have led to a severely intriguing imbalance ecosystem equilibrium, associated to habitat degradation, environmental pollution, shortage of ecosystem services production and shift in species distribution, food insecurity, invasive species and complex species associations. The consequences are particularly disturbing regarding health and wellbeing of human populations. Especially to Sub-Saharan Africa, informed evidence-based statistics are inappropriately if not at all used for developing and implementing coping measures. This makes a regrettable scenario for Rwanda, a research-driven economic transformation country in which mostly expensive long-term interventions remain meaningless and unknowingly approved effective. More important, no single sector can ultimately afford the most informative approaches providing evidence and guiding policy and decisions, due to limited resources. Rwanda dedicates substantial investment to sustain a conducive, robust and flourishing environment promoting research priorities most likely to deliver improved health outcomes. In this framework, the above mentioned approach supports cross-sectoral analyses to evaluate health care quality improvements through impact assessments, policy analysis and forecasting. This approach "Consolidating GIS, Biostatistics, meteo, mobile and e-health approaches (GBMH)" tailors disaster, disease control and prevention, farming options, effective planning, interventions and communication for safe health in sound environment. Under GBMH models, Integrated Time Series analysis completed in R Studio on health interventions from HMIS and DHS and DHSS systems (on environment and disaster management, farming practices and health sector

  17. "GIS, Biostatistics, meteo, m-health and e-health approaches for tailored informed evidence-based agricultural, environment and health interventions in Rwanda"

    Science.gov (United States)

    Karame, P., Sr.; Dushimiyimana, V.

    2016-12-01

    " Championing GIS-Biostatistics-Meteo for Health (GBMH), A consolidated approach"The environmental vulnerability rate due to human-induced threats and climate change has exceeded the capacity of ecosystems and species to adapt naturally. Drastic changes in seasonal and weather patterns have led to a severely intriguing imbalance ecosystem equilibrium, associated to habitat degradation, environmental pollution, shortage of ecosystem services production and shift in species distribution, food insecurity, invasive species and complex species associations. The consequences are particularly disturbing regarding health and wellbeing of human populations. Especially to Sub-Saharan Africa, informed evidence-based statistics are inappropriately if not at all used for developing and implementing coping measures. This makes a regrettable scenario for Rwanda, a research-driven economic transformation country in which mostly expensive long-term interventions remain meaningless and unknowingly approved effective. More important, no single sector can ultimately afford the most informative approaches providing evidence and guiding policy and decisions, due to limited resources. Rwanda dedicates substantial investment to sustain a conducive, robust and flourishing environment promoting research priorities most likely to deliver improved health outcomes. In this framework, the above mentioned approach supports cross-sectoral analyses to evaluate health care quality improvements through impact assessments, policy analysis and forecasting. This approach "Consolidating GIS, Biostatistics, meteo, mobile and e-health approaches (GBMH)" tailors disaster, disease control and prevention, farming options, effective planning, interventions and communication for safe health in sound environment. Under GBMH models, Integrated Time Series analysis completed in R Studio on health interventions from HMIS and DHS and DHSS systems (on environment and disaster management, farming practices and health

  18. Using Web-Based GIS in Introductory Human Geography

    Science.gov (United States)

    Songer, Lynn C.

    2010-01-01

    Advocates for using a geographic information system (GIS) in education assert that GIS improves student learning. However, studies to clarify the relationship between learning and using GIS are still needed. This study examines the effects of using Web-based GIS maps in place of paper maps on students' geography content knowledge and motivation…

  19. GIS-based assessment of landslide susceptibility using certainty ...

    Indian Academy of Sciences (India)

    tion systems (GIS) using different models. Many of these ... as spatial multicriteria decision analysis (MCDA) approach ... 2013), support vec- ... Landslide susceptibility assessment using mathematical methods in GIS, Qianyang China 1401.

  20. A knowledge-based approach for C-factor mapping in Spain using Landsat TM and GIS

    DEFF Research Database (Denmark)

    Veihe (former Folly), Anita; Bronsveld, M.C.; Clavaux, M

    1996-01-01

    The cover and management factor (C) in the Universal Soil Loss Equation (USLE), is one of the most important parameters for assessing erosion. In this study it is shown how a knowledge-based approach can be used to optimize C-factor mapping in the Mediterranean region being characterized...... to the limitations of the USLE...

  1. Using the PCRaster-POLFLOW approach to GIS-based modelling of coupled groundwater-surface water hydrology in the Forsmark Area

    International Nuclear Information System (INIS)

    Jarsjoe, Jerker; Shibuo, Yoshihiro; Destouni, Georgia

    2004-09-01

    The catchment-scale hydrologic modelling approach PCRaster-POLFLOW permits the integration of environmental process modelling functions with classical GIS functions such as database maintenance and screen display. It has previously successfully been applied at relatively large river basins and catchments, such as Rhine, Elbe and Norrstroem, for modelling stream water flow and nutrient transport. In this study, we review the PCRaster-POLFLOW modelling approach and apply it using a relatively fine spatial resolution to the smaller catchment of Forsmark. As input we use data from SKB's database, which includes detailed data from Forsmark (and Simpevarp), since these locations are being investigated as part of the process to find a suitable location for a deep repository for spent nuclear fuel. We show, by comparison with independently measured, area-averaged runoff data, that the PCRaster-POLFLOW model produces results that, without using site-specific calibration, agree well with these independent measurements. In addition, we deliver results for four planned hydrological stations within the Forsmark catchment thus allowing for future direct comparisons with streamflow monitoring. We also show that, and how, the PCRaster-POLFLOW model in its present state can be used for predicting average seasonal streamflow. The present modelling exercise provided insights into possible ways of extending and using the PCRaster-POLFLOW model for applications beyond its current main focus of surface water hydrology. In particular, regarding analysis of possible surface water-groundwater interactions, we identify the Analytic Element Method for groundwater modelling together with its GIS-based pre- and post processor ArcFlow as suitable and promising for use in combination with the PCRaster-POLFLOW modelling approach. Furthermore, for transport modelling, such as that of radionuclides entering the coupled shallow groundwater-surface water hydrological system from possible deep

  2. Using the PCRaster-POLFLOW approach to GIS-based modelling of coupled groundwater-surface water hydrology in the Forsmark Area

    Energy Technology Data Exchange (ETDEWEB)

    Jarsjoe, Jerker; Shibuo, Yoshihiro; Destouni, Georgia [Stockholm Univ. (Sweden). Dept. of Physical Geography and Quaternary Geology

    2004-09-01

    The catchment-scale hydrologic modelling approach PCRaster-POLFLOW permits the integration of environmental process modelling functions with classical GIS functions such as database maintenance and screen display. It has previously successfully been applied at relatively large river basins and catchments, such as Rhine, Elbe and Norrstroem, for modelling stream water flow and nutrient transport. In this study, we review the PCRaster-POLFLOW modelling approach and apply it using a relatively fine spatial resolution to the smaller catchment of Forsmark. As input we use data from SKB's database, which includes detailed data from Forsmark (and Simpevarp), since these locations are being investigated as part of the process to find a suitable location for a deep repository for spent nuclear fuel. We show, by comparison with independently measured, area-averaged runoff data, that the PCRaster-POLFLOW model produces results that, without using site-specific calibration, agree well with these independent measurements. In addition, we deliver results for four planned hydrological stations within the Forsmark catchment thus allowing for future direct comparisons with streamflow monitoring. We also show that, and how, the PCRaster-POLFLOW model in its present state can be used for predicting average seasonal streamflow. The present modelling exercise provided insights into possible ways of extending and using the PCRaster-POLFLOW model for applications beyond its current main focus of surface water hydrology. In particular, regarding analysis of possible surface water-groundwater interactions, we identify the Analytic Element Method for groundwater modelling together with its GIS-based pre- and post processor ArcFlow as suitable and promising for use in combination with the PCRaster-POLFLOW modelling approach. Furthermore, for transport modelling, such as that of radionuclides entering the coupled shallow groundwater-surface water hydrological system from possible deep

  3. 348 A GIS AND REMOTE SENSING APPROACH TO ASSESSMENT ...

    African Journals Online (AJOL)

    Osondu

    A GIS AND REMOTE SENSING APPROACH TO ASSESSMENT OF DEFORESTATION IN ... This study measured and analyzed deforestation in Uyo and examined the possible effects of the ..... the Burkill technique, (1985, 1994, 1995, 1997.

  4. IMPLEMENTATION OF GIS-BASED MULTICRITERIA DECISION ANALYSIS WITH VB IN ArcGIS

    OpenAIRE

    DERYA OZTURK; FATMAGUL BATUK

    2011-01-01

    This article focuses on the integration of multicriteria decision analysis (MCDA) and geographical information systems (GIS) and introduces a tool, GIS–MCDA, written in visual basic in ArcGIS for GIS-based MCDA. The GIS–MCDA deals with raster-based data sets and includes standardization, weighting and decision analysis methods, and sensitivity analysis. Simple additive weighting, weighted product method, technique for order preference by similarity to ideal solution, compromise programming, a...

  5. GIS-based approach for defining bioenergy facilities location: A case study in Northern Spain based on marginal delivery costs and resources competition between facilities

    Energy Technology Data Exchange (ETDEWEB)

    Panichelli, Luis; Gnansounou, Edgard [Laboratory of Energy Systems, Swiss Federal Institute of Technology, LASEN-ICARE-ENAC, Station 18, EPFL, CH-1015 Lausanne (Switzerland)

    2008-04-15

    This paper presents a GIS-based decision support system for selecting least-cost bioenergy locations when there is a significant variability in biomass farmgate price and when more than one bioenergy plant with a fixed capacity has to be placed in the region. The methodology tackles the resources competition problem between energy facilities through a location-allocation model based on least-cost biomass quantities. Whole system least delivery cost including intermediate bioenergy products is estimated. The methodology is based on a case study where forest wood residues (FWR) from final cuttings (FCs) are used to produce torrefied wood (TW) in two torrefaction plants (TUs) that supply a gasification unit (GU) in order to produce electricity. The provinces of Navarra, Bizkaia, Gipuzkoa, Alava, La Rioja, Cantabria and Burgos are assessed in order to find the best locations for settling down the TUs and the GU according to biomass availability, FWR and TW marginal delivery costs. (author)

  6. Assessment of sediment quality in the Mediterranean Sea-Boughrara lagoon exchange areas (southeastern Tunisia): GIS approach-based chemometric methods.

    Science.gov (United States)

    Kharroubi, Adel; Gargouri, Dorra; Baati, Houda; Azri, Chafai

    2012-06-01

    Concentrations of selected heavy metals (Cd, Pb, Zn, Cu, Mn, and Fe) in surface sediments from 66 sites in both northern and eastern Mediterranean Sea-Boughrara lagoon exchange areas (southeastern Tunisia) were studied in order to understand current metal contamination due to the urbanization and economic development of nearby several coastal regions of the Gulf of Gabès. Multiple approaches were applied for the sediment quality assessment. These approaches were based on GIS coupled with chemometric methods (enrichment factors, geoaccumulation index, principal component analysis, and cluster analysis). Enrichment factors and principal component analysis revealed two distinct groups of metals. The first group corresponded to Fe and Mn derived from natural sources, and the second group contained Cd, Pb, Zn, and Cu originated from man-made sources. For these latter metals, cluster analysis showed two distinct distributions in the selected areas. They were attributed to temporal and spatial variations of contaminant sources input. The geoaccumulation index (I (geo)) values explained that only Cd, Pb, and Cu can be considered as moderate to extreme pollutants in the studied sediments.

  7. THE CONTRIBUTION OF GIS IN FLOOD MAPPING: TWO APPROACHES USING OPEN SOURCE GRASS GIS SOFTWARE

    Directory of Open Access Journals (Sweden)

    R. Marzocchi

    2014-01-01

    In this work we present a comparison between the two models mentioned above. We analyse the possibility of integrating these two approaches. We intend to use the 1D model, GIS embedded if possible, to calculate the water surface profile along the river axis and the 2D numerical one to analyse inundation beside the river levees.

  8. Probable existence of a Gondwana transcontinental rift system in western India: Implications in hydrocarbon exploration in Kutch and Saurashtra offshore: A GIS-based approach

    Science.gov (United States)

    Mazumder, S.; Tep, Blecy; Pangtey, K. K. S.; Das, K. K.; Mitra, D. S.

    2017-08-01

    The Gondwanaland assembly rifted dominantly during Late Carboniferous-Early Permian forming several intracratonic rift basins. These rifts were subsequently filled with a thick sequence of continental clastic sediments with minor marine intercalations in early phase. In western part of India, these sediments are recorded in enclaves of Bikaner-Nagaur and Jaisalmer basins in Rajasthan. Facies correlatives of these sediments are observed in a number of basins that were earlier thought to be associated with the western part of India. The present work is a GIS based approach to reconnect those basins to their position during rifting and reconstruct the tectono-sedimentary environment at that time range. The study indicates a rift system spanning from Arabian plate in the north and extending to southern part of Africa that passes through Indus basin, western part of India and Madagascar, and existed from Late Carboniferous to Early Jurassic. Extensions related to the opening of Neo-Tethys led to the formation of a number of cross trends in the rift systems that acted as barriers to marine transgressions from the north as well as disrupted the earlier continuous longitudinal drainage systems. The axis of this rift system is envisaged to pass through present day offshore Kutch and Saurashtra and implies a thick deposit of Late Carboniferous to Early Jurassic sediments in these areas. Based on analogy with other basins associated with this rift system, these sediments may be targeted for hydrocarbon exploration.

  9. Spatial UTA (S-UTA) - a new approach for raster-based GIS multicriteria suitability analysis and its use in implementing natural systems for wastewater treatment.

    Science.gov (United States)

    Demesouka, O E; Vavatsikos, A P; Anagnostopoulos, K P

    2013-08-15

    The identification of sites for locating new natural systems for wastewater treatment (NSWT), such as stabilization ponds and constructed wetlands, should combine multiple crucial factors (environmental, design, social and economic), and thus the implementation of multicriteria decision-making (MCDM) methods is required. In addition, the spatial nature of the site selection process necessitates the use of geographic information systems (GISs) because they are unanimously recognized as the most appropriate tool capable of supporting sophisticated spatial decision making. The resulting multicriteria spatial decision support systems (MC-SDSSs) provide a consistent framework for dealing with conflicting objectives while integrating the decision makers' (DMs') preferences in spatially related patterns/problems. A map-based, interactive UTAII implementation is presented, which provides a link between a well-understood decision support method and exploratory geographic visualization. Spatial UTA (S-UTA) is applied in a real case study concerning the ranking of candidate sites for implementing natural systems for wastewater treatment in the Evros-Rodopi prefectures of northeastern Greece. Finally, the obtained results are compared with those derived using other MCDM approaches to evaluate the performance of S-UTA in GIS-based land use suitability analyses. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. GIS In-Service Teacher Training Based on TPACK

    Science.gov (United States)

    Hong, Jung Eun; Stonier, Francis

    2015-01-01

    This article introduces the geographic information systems (GIS) in-service teacher training, focusing on the intersection of technological, pedagogical, and content knowledge (TPACK) for successful implementation of GIS in the classroom. Eleven social studies teachers in Georgia learned GIS technologies, inquiry-based learning, and social studies…

  11. Holistic Approach to Secondary Earth Science Teacher Professional Development: the Triad of Project-based Instruction, Earth Science Content, and GIS Technology

    Science.gov (United States)

    Rubino-Hare, L.; Sample, J. C.; Fredrickson, K.; Claesgens, J.; Bloom, N.; Henderson-Dahms, C.; Manone, M.

    2011-12-01

    We have provided two years of professional development for secondary and middle school teachers with a focus on project-based instruction (PBI) using GIS. The EYE-POD project (funded by NSF-ITEST) involved pairs of teachers from Arizona and the surrounding region in two-week institutes during Summer, 2010, and an advanced institute in Summer, 2011. The NAz-POD project (funded by Arizona Department of Education and administered by Science Foundation Arizona) provided similar PD experiences, but the institutes occurred during weekends in the academic year. The institutes were led by a team with expertise in Earth science content, professional development and pedagogy, and GIS. The teachers developed learning modules using the project based learning instructional model. Pedagogy, content, and GIS skills were combined throughout the professional development activities. Academic year follow up by NAU personnel included classroom observations and technical support. For assessing student work we provided a rubric, but learned that teachers were not prepared to assess GIS products in order to determine the level of student understanding. In year two of the project we incorporated strategies for assessment of student products into the professional development. Teacher-participants and their students completed several pre- and post- assessments. Teacher assessments included a geospatial performance assessment, classroom observations, and content tests. Student data collection included attitude and efficacy questionnaires, content tests, and authentic assessments including products using GIS. Content tests were the same for teachers and students and included spatial reasoning, data analysis, and Earth science content. Data was also collected on teacher perception of professional development delivery and self-reported confidence in teaching with PBI and geospatial technology. Student assessments show that improvement occurred in all areas on the content test. Possible factors

  12. GIS and Multi Criteria Decision Method Based Approach of Identifying Appropriate Landfill Sites for the City Of Chittagong

    Directory of Open Access Journals (Sweden)

    M. Ali Ashraf

    2015-02-01

    Full Text Available  Urban solid waste management is a serious environmental issue confronting the cities in developing countries like Bangladesh. Apathy towards the problem, inadequacy of field level information and data, and resource constraints may be blamed for the dismal situation of solid waste management often visible in our cities. The most common problems associated with the absence of sustainable solid waste management practice include diseases transmission, odour nuisance, atmospheric and water pollution, visual blight, fire hazards and economic losses. In the three major cities of Bangladesh, Dhaka, Chittagong & Khulna, per capita production of solid waste is around 0.4kg /capita / day, but only a fraction of this waste is carried to the final disposal site. A recent study on Municipal Solid Waste Management found that waste generated in Chittagong was 0.352kg/cap/day. Considering per capita generation of solid waste as 0.352kg to 0.4kg per capita per day, for a population of 25, 92,459 distributed within the 41 wards of the city (BBS, 2011, total solid waste generated in Chittagong will be around 913 tons to 1037 tons per day in 2012. Currently, Chittagong City Corporation (CCC has only two dumping yards: one at Ananda Bazar, Halishahar at the mid western part of the city and the other at Arefin Nagar, Pahartali at the northern tip of the city. None of these sites are sanitary landfill. Considering the city area of 168 sq. kms, only two dumping sites are not sufficient to cater to the requirement of the city. Long distances between the collection points and the disposal site are responsible for inefficient utilization of the CCC trucks and the resulting increase in the haulage time that eventually increases the costs of collection and disposal. This study utilized Geographic Information System (GIS and Multi-Criteria Decision Method (MCDM for the identification and selection of appropriate landfill sites within the city of Chittagong. Thirteen sites

  13. Highway traffic noise prediction based on GIS

    Science.gov (United States)

    Zhao, Jianghua; Qin, Qiming

    2014-05-01

    Before building a new road, we need to predict the traffic noise generated by vehicles. Traditional traffic noise prediction methods are based on certain locations and they are not only time-consuming, high cost, but also cannot be visualized. Geographical Information System (GIS) can not only solve the problem of manual data processing, but also can get noise values at any point. The paper selected a road segment from Wenxi to Heyang. According to the geographical overview of the study area and the comparison between several models, we combine the JTG B03-2006 model and the HJ2.4-2009 model to predict the traffic noise depending on the circumstances. Finally, we interpolate the noise values at each prediction point and then generate contours of noise. By overlaying the village data on the noise contour layer, we can get the thematic maps. The use of GIS for road traffic noise prediction greatly facilitates the decision-makers because of GIS spatial analysis function and visualization capabilities. We can clearly see the districts where noise are excessive, and thus it becomes convenient to optimize the road line and take noise reduction measures such as installing sound barriers and relocating villages and so on.

  14. Hybrid artificial intelligence approach based on neural fuzzy inference model and metaheuristic optimization for flood susceptibilitgy modeling in a high-frequency tropical cyclone area using GIS

    Science.gov (United States)

    Tien Bui, Dieu; Pradhan, Biswajeet; Nampak, Haleh; Bui, Quang-Thanh; Tran, Quynh-An; Nguyen, Quoc-Phi

    2016-09-01

    This paper proposes a new artificial intelligence approach based on neural fuzzy inference system and metaheuristic optimization for flood susceptibility modeling, namely MONF. In the new approach, the neural fuzzy inference system was used to create an initial flood susceptibility model and then the model was optimized using two metaheuristic algorithms, Evolutionary Genetic and Particle Swarm Optimization. A high-frequency tropical cyclone area of the Tuong Duong district in Central Vietnam was used as a case study. First, a GIS database for the study area was constructed. The database that includes 76 historical flood inundated areas and ten flood influencing factors was used to develop and validate the proposed model. Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Receiver Operating Characteristic (ROC) curve, and area under the ROC curve (AUC) were used to assess the model performance and its prediction capability. Experimental results showed that the proposed model has high performance on both the training (RMSE = 0.306, MAE = 0.094, AUC = 0.962) and validation dataset (RMSE = 0.362, MAE = 0.130, AUC = 0.911). The usability of the proposed model was evaluated by comparing with those obtained from state-of-the art benchmark soft computing techniques such as J48 Decision Tree, Random Forest, Multi-layer Perceptron Neural Network, Support Vector Machine, and Adaptive Neuro Fuzzy Inference System. The results show that the proposed MONF model outperforms the above benchmark models; we conclude that the MONF model is a new alternative tool that should be used in flood susceptibility mapping. The result in this study is useful for planners and decision makers for sustainable management of flood-prone areas.

  15. Soil quality assessment using GIS-based chemometric approach and pollution indices: Nakhlak mining district, Central Iran.

    Science.gov (United States)

    Moore, Farid; Sheykhi, Vahideh; Salari, Mohammad; Bagheri, Adel

    2016-04-01

    This paper is a comprehensive assessment of the quality of soil in the Nakhlak mining district in Central Iran with special reference to potentially toxic metals. In this regard, an integrated approach involving geostatistical, correlation matrix, pollution indices, and chemical fractionation measurement is used to evaluate selected potentially toxic metals in soil samples. The fractionation of metals indicated a relatively high variability. Some metals (Mo, Ag, and Pb) showed important enrichment in the bioavailable fractions (i.e., exchangeable and carbonate), whereas the residual fraction mostly comprised Sb and Cr. The Cd, Zn, Co, Ni, Mo, Cu, and As were retained in Fe-Mn oxide and oxidizable fractions, suggesting that they may be released to the environment by changes in physicochemical conditions. The spatial variability patterns of 11 soil heavy metals (Ag, As, Cd, Co, Cr, Cu, Mo, Ni, Pb, Sb, and Zn) were identified and mapped. The results demonstrated that Ag, As, Cd, Mo, Cu, Pb, Sb, and Zn pollution are associated with mineralized veins and mining operations in this area. Further environmental monitoring and remedial actions are required for management of soil heavy metals in the study area. The present study not only enhanced our knowledge regarding soil pollution in the study area but also introduced a better technique to analyze pollution indices by multivariate geostatistical methods.

  16. A new data integration approach for AutoCAD and GIS

    Science.gov (United States)

    Ye, Hongmei; Li, Yuhong; Wang, Cheng; Li, Lijun

    2006-10-01

    GIS has its advantages both on spatial data analysis and management, particularly on the geometric and attributive information management, which has also attracted lots attentions among researchers around world. AutoCAD plays more and more important roles as one of the main data sources of GIS. Various work and achievements can be found in the related literature. However, the conventional data integration from AutoCAD to GIS is time-consuming, which also can cause the information loss both in the geometric aspects and the attributive aspects for a large system. It is necessary and urgent to sort out new approach and algorithm for the efficient high-quality data integration. In this paper, a novel data integration approach from AutoCAD to GIS will be introduced based on the spatial data mining technique through the data structure analysis both in the AutoCAD and GIS. A practicable algorithm for the data conversion from CAD to GIS will be given as well. By a designed evaluation scheme, the accuracy of the conversion both in the geometric and the attributive information will be demonstrated. Finally, the validity and feasibility of the new approach will be shown by an experimental analysis.

  17. Combining Project-based Instruction, Earth Science Content, and GIS Technology in Teacher Professional Development: Is this Holistic Approach Sustainable?

    Science.gov (United States)

    Rubino-Hare, L.; Bloom, N.; Claesgens, J.; Fredrickson, K.; Henderson-Dahms, C.; Sample, J. C.

    2012-12-01

    From 2009-2011, with support from the National Science Foundation (ITEST, DRL-0929846) and Science Foundation Arizona (MSAG-0412-09), educators, geologists and geographers at Northern Arizona University (NAU) partnered to offer professional development for interdisciplinary teams of secondary and middle school teachers with a focus on project-based instruction (PBI) using geospatial technologies (GST). While participating in professional development teachers received support and were held accountable to NAU staff. They implemented activities and pedagogical strategies presented, increased knowledge, skills, and confidence teaching with project-based instruction integrating GST, and their students demonstrated learning gains. Changes in student understanding are only observed when teachers continue to implement change, so the question remained: did these changes in practice sustain after official project support ended? In order to determine what, if anything, teachers sustained from the professional development and the factors that promoted or hindered sustained use of teaching with GST and PBI, data were collected one to two years following the professional development. Research questions included a) what pedagogical practices did teachers sustain following the professional learning experiences? and b) what contexts were present in schools that supported or limited the use of geospatial technologies as a teaching and learning tool? Findings from this study indicate that teachers fall into three categories of sustaining implementation - reformed implementers, mechanical implementers and non-implementers. School context was less of a factor in level of implementation than teachers' beliefs and philosophy of teaching and teachers' understanding of technology integration (teaching with technology vs. teaching technology). Case studies of teacher experiences will be presented along with implications for future professional development.

  18. Modeling of geoelectric parameters for assessing groundwater potentiality in a multifaceted geologic terrain, Ipinsa Southwest, Nigeria - A GIS-based GODT approach

    Science.gov (United States)

    Mogaji, Kehinde Anthony; Omobude, Osayande Bright

    2017-12-01

    Modeling of groundwater potentiality zones is a vital scheme for effective management of groundwater resources. This study developed a new multi-criteria decision making algorithm for groundwater potentiality modeling through modifying the standard GOD model. The developed model christened as GODT model was applied to assess groundwater potential in a multi-faceted crystalline geologic terrain, southwestern, Nigeria using the derived four unify groundwater potential conditioning factors namely: Groundwater hydraulic confinement (G), aquifer Overlying strata resistivity (O), Depth to water table (D) and Thickness of aquifer (T) from the interpreted geophysical data acquired in the area. With the developed model algorithm, the GIS-based produced G, O, D and T maps were synthesized to estimate groundwater potential index (GWPI) values for the area. The estimated GWPI values were processed in GIS environment to produce groundwater potential prediction index (GPPI) map which demarcate the area into four potential zones. The produced GODT model-based GPPI map was validated through application of both correlation technique and spatial attribute comparative scheme (SACS). The performance of the GODT model was compared with that of the standard analytic hierarchy process (AHP) model. The correlation technique results established 89% regression coefficients for the GODT modeling algorithm compared with 84% for the AHP model. On the other hand, the SACS validation results for the GODT and AHP models are 72.5% and 65%, respectively. The overall results indicate that both models have good capability for predicting groundwater potential zones with the GIS-based GODT model as a good alternative. The GPPI maps produced in this study can form part of decision making model for environmental planning and groundwater management in the area.

  19. Computer-based instrumentation for partial discharge detection in GIS

    International Nuclear Information System (INIS)

    Md Enamul Haque; Ahmad Darus; Yaacob, M.M.; Halil Hussain; Feroz Ahmed

    2000-01-01

    Partial discharge is one of the prominent indicators of defects and insulation degradation in a Gas Insulated Switchgear (GIS). Partial discharges (PD) have a harmful effect on the life of insulation of high voltage equipment. The PD detection using acoustic technique and subsequent analysis is currently an efficient method of performing non-destructive testing of GIS apparatus. A low cost PC-based acoustic PD detection instrument has been developed for the non-destructive diagnosis of GIS. This paper describes the development of a PC-based instrumentation system for partial discharge detection in GIS and some experimental results have also presented. (Author)

  20. A GIS approach for predicting prehistoric site locations.

    Energy Technology Data Exchange (ETDEWEB)

    Kuiper, J. A.; Wescott, K. L.

    1999-08-04

    Use of geographic information system (GIS)-based predictive mapping to locate areas of high potential for prehistoric archaeological sites is becoming increasingly popular among archaeologists. Knowledge of the environmental variables influencing activities of original inhabitants is used to produce GIS layers representing the spatial distribution of those variables. The GIS layers are then analyzed to identify locations where combinations of environmental variables match patterns observed at known prehistoric sites. Presented are the results of a study to locate high-potential areas for prehistoric sites in a largely unsurveyed area of 39,000 acres in the Upper Chesapeake Bay region, including details of the analysis process. The project used environmental data from over 500 known sites in other parts of the region and the results corresponded well with known sites in the study area.

  1. Evaluating public space pedestrian accessibility: a GIS approach

    NARCIS (Netherlands)

    Morar, T.; Bertolini, L.; Radoslav, R.

    2013-01-01

    Public spaces are sources of quality of life in neighborhoods. Seeking to help professionals and municipalities assess how well a public space can be used by the community it serves, this paper presents a GIS-based methodology for evaluating its pedestrian accessibility. The Romanian city of

  2. Format conversion between CAD data and GIS data based on ArcGIS

    Science.gov (United States)

    Xie, Qingqing; Wei, Bo; Zhang, Kailin; Wang, Zhichao

    2015-12-01

    To make full use of the data resources and realize a sharing for the different types of data in different industries, a method of format conversion between CAD data and GIS data based on ArcGIS was proposed. To keep the integrity of the converted data, some key steps to process CAD data before conversion were made in AutoCAD. For examples, deleting unnecessary elements such as title, border and legend avoided the appearance of unnecessary elements after conversion, as layering data again by a national standard avoided the different types of elements to appear in a same layer after conversion. In ArcGIS, converting CAD data to GIS data was executed by the correspondence of graphic element classification between AutoCAD and ArcGIS. In addition, an empty geographic database and feature set was required to create in ArcGIS for storing the text data of CAD data. The experimental results show that the proposed method avoids a large amount of editing work in data conversion and maintains the integrity of spatial data and attribute data between before and after conversion.

  3. Development of a GIS approach to mining risk assessment. Supervising Scientist report 159

    International Nuclear Information System (INIS)

    Boggs, G.S.

    2001-01-01

    A Geographic Information System (GIS) offers a means by which the data collected during the assessment of possible mining impacts can be stored and manipulated. A GIS that provides a central focus point for the storage, manipulation and retrieval of information generated by the investigation into the geomorphological impact of the ERA Jabiluka Mine has been developed. Implementing a flexible, GIS-centred approach to data management allows the data storage, manipulation and retrieval powers of GIS to be retained whilst maintaining access to the functionality contained within these other software packages. The GIS has also been linked to the DistFW hydrology model and SIBERIA landform evolution model, to provide a more spatial approach to assessing the impact of mining on the long-term landform evolution of a catchment. A GIS based rapid erosion assessment method has been developed and evaluated. The method allows the user to quickly acquire and evaluate existing data to assist in the planning of more detailed monitoring, modelling and erosion assessment programs. The rapid erosion assessment method is based on a simplified version of the Revised Universal Soil Loss Equation (RUSLE), and allows the rapid parametrisation of the model from widely available land unit and elevation datasets. The rapid erosion assessment method is evaluated through the investigation of the effects of elevation data resolution on erosion predictions and field data validation. More detailed, quantitative risk assessment can be conducted using a combination of landform evolution modelling and basin analysis in a GIS framework. SIBERIA has been parameterized using field data from Ngarradj and applied to the catchment. Due to complexities of the catchment there were some difficulties with the hydrology component. However, the results indicate that SIBERIA is suitable and simulations showed little change in the catchment in the long term. Combining these with newly developed GIS tools to

  4. GIS-based approach for optimal siting and sizing of renewables considering techno-environmental constraints and the stochastic nature of meteorological inputs

    Science.gov (United States)

    Daskalou, Olympia; Karanastasi, Maria; Markonis, Yannis; Dimitriadis, Panayiotis; Koukouvinos, Antonis; Efstratiadis, Andreas; Koutsoyiannis, Demetris

    2016-04-01

    Following the legislative EU targets and taking advantage of its high renewable energy potential, Greece can obtain significant benefits from developing its water, solar and wind energy resources. In this context we present a GIS-based methodology for the optimal sizing and siting of solar and wind energy systems at the regional scale, which is tested in the Prefecture of Thessaly. First, we assess the wind and solar potential, taking into account the stochastic nature of the associated meteorological processes (i.e. wind speed and solar radiation, respectively), which is essential component for both planning (i.e., type selection and sizing of photovoltaic panels and wind turbines) and management purposes (i.e., real-time operation of the system). For the optimal siting, we assess the efficiency and economic performance of the energy system, also accounting for a number of constraints, associated with topographic limitations (e.g., terrain slope, proximity to road and electricity grid network, etc.), the environmental legislation and other land use constraints. Based on this analysis, we investigate favorable alternatives using technical, environmental as well as financial criteria. The final outcome is GIS maps that depict the available energy potential and the optimal layout for photovoltaic panels and wind turbines over the study area. We also consider a hypothetical scenario of future development of the study area, in which we assume the combined operation of the above renewables with major hydroelectric dams and pumped-storage facilities, thus providing a unique hybrid renewable system, extended at the regional scale.

  5. Open Source GIS based integrated watershed management

    Science.gov (United States)

    Byrne, J. M.; Lindsay, J.; Berg, A. A.

    2013-12-01

    Optimal land and water management to address future and current resource stresses and allocation challenges requires the development of state-of-the-art geomatics and hydrological modelling tools. Future hydrological modelling tools should be of high resolution, process based with real-time capability to assess changing resource issues critical to short, medium and long-term enviromental management. The objective here is to merge two renowned, well published resource modeling programs to create an source toolbox for integrated land and water management applications. This work will facilitate a much increased efficiency in land and water resource security, management and planning. Following an 'open-source' philosophy, the tools will be computer platform independent with source code freely available, maximizing knowledge transfer and the global value of the proposed research. The envisioned set of water resource management tools will be housed within 'Whitebox Geospatial Analysis Tools'. Whitebox, is an open-source geographical information system (GIS) developed by Dr. John Lindsay at the University of Guelph. The emphasis of the Whitebox project has been to develop a user-friendly interface for advanced spatial analysis in environmental applications. The plugin architecture of the software is ideal for the tight-integration of spatially distributed models and spatial analysis algorithms such as those contained within the GENESYS suite. Open-source development extends knowledge and technology transfer to a broad range of end-users and builds Canadian capability to address complex resource management problems with better tools and expertise for managers in Canada and around the world. GENESYS (Generate Earth Systems Science input) is an innovative, efficient, high-resolution hydro- and agro-meteorological model for complex terrain watersheds developed under the direction of Dr. James Byrne. GENESYS is an outstanding research and applications tool to address

  6. Analyzing the Correlation between Deer Habitat and the Component of the Risk for Lyme Disease in Eastern Ontario, Canada: A GIS-Based Approach

    Directory of Open Access Journals (Sweden)

    Dongmei Chen

    2015-01-01

    Full Text Available Lyme borreliosis, caused by the bacterium, Borrelia burgdorferi, is an emerging vector-borne infectious disease in Canada. According to the Public Health Agency of Canada (PHAC, by the year 2020, 80% of Canadians will live in Lyme endemic areas. An understanding of the association of Ixodes scapularis, the main vector of Lyme disease, with it hosts is a fundamental component in assessing changes in the spatial distribution of human risk for Lyme disease. Through the application of Geographic Information System (GIS mapping methods and spatial analysis techniques, this study examines the population dynamics of the black-legged Lyme tick and its primary host, the white-tailed deer, in eastern Ontario, Canada. By developing a habitat suitability model through a GIS-based multi-criteria decision making (MCDM analysis, the relationship of the deer habitat suitability map was generated and the results were compared with deer harvest data. Tick submission data collected from two public health units between 2006 and 2012 were used to explore the relationship between endemic ticks and deer habitat suitability in eastern Ontario. The positive correlation demonstrated between the deer habitat suitability model and deer harvest data allows us to further analyze the association between deer habitat and black-legged ticks in our study area. Our results revealed that the high tick submission number corresponds with the high suitability. These results are useful for developing management strategies that aim to prevent Lyme from becoming a threat to public health in Canada. Further studies are required to investigate how tick survival, behaviour and seasonal activity may change with projected climate change.

  7. Modelling the changing cumulative vulnerability to climate-related hazards for river basin management using a GIS-based multicriteria decision approach

    Science.gov (United States)

    Hung, Hung-Chih; Wu, Ju-Yu; Hung, Chih-Hsuan

    2017-04-01

    1. Background Asia-Pacific region is one of the most vulnerable areas of the world to climate-related hazards and extremes due to rapid urbanization and over-development in hazard-prone areas. It is thus increasingly recognized that the management of land use and reduction of hazard risk are inextricably linked. This is especially critical from the perspective of integrated river basin management. A range of studies has targeted existing vulnerability assessments. However, limited attention has been paid to the cumulative effects of multiple vulnerable factors and their dynamics faced by local communities. This study proposes a novel methodology to access the changing cumulative vulnerability to climate-related hazards, and to examine the relationship between the attraction factors relevant to the general process of urbanization and vulnerability variability with a focus on a river basin management unit. 2. Methods and data The methods applied in this study include three steps. First, using Intergovernmental Panel on Climate Change's (IPCC) approach, a Cumulative Vulnerability Assessment Framework (CVAF) is built with a goal to characterize and compare the vulnerability to climate-related hazards within river basin regions based on a composition of multiple indicators. We organize these indicator metrics into three categories: (1) hazard exposure; (2) socioeconomic sensitivity, and (3) adaptive capacity. Second, the CVAF is applied by combining a geographical information system (GIS)-based spatial statistics technique with a multicriteria decision analysis (MCDA) to assess and map the changing cumulative vulnerability, comparing conditions in 1996 and 2006 in Danshui River Basin, Taiwan. Third, to examine the affecting factors of vulnerability changing, we develop a Vulnerability Changing Model (VCM) using four attraction factors to reflect how the process of urban developments leads to vulnerability changing. The factors are transport networks, land uses

  8. Evaluation of AirGIS: a GIS-based air pollution and human exposure modelling system

    DEFF Research Database (Denmark)

    Ketzel, Matthias; Berkowicz, Ruwim; Hvidberg, Martin

    2011-01-01

    This study describes in brief the latest extensions of the Danish Geographic Information System (GIS)-based air pollution and human exposure modelling system (AirGIS), which has been developed in Denmark since 2001 and gives results of an evaluation with measured air pollution data. The system...... shows, in general, a good performance for both long-term averages (annual and monthly averages), short-term averages (hourly and daily) as well as when reproducing spatial variation in air pollution concentrations. Some shortcomings and future perspectives of the system are discussed too....

  9. Improving the GIS-DRP Approach by Means of DelineatingRunoff Characteristics with New Discharge Relevant Parameters

    Directory of Open Access Journals (Sweden)

    Marco Hümann

    2013-01-01

    Full Text Available At present it is common to use geographic information system (GIS applications to assess runoff generation. One of these GIS-based tools to generate maps of dominant runoff processes is the so called GIS-DRP approach. The tool, which has been developed mainly based on agricultural areas, uses commonly available input data like a digital elevation model (DEM, geological information as well as land use information. The aim of this study is to test, validate and improve this GIS-DRP method for forested and silviculture areas. Hence, soil-hydrologic investigations and several mapping techniques of dominant runoff processes were conducted on 25 test-plots in four forested catchments in Rhineland-Palatinate (Germany and the Grand Duchy of Luxembourg. By comparing the results of the mapping techniques and those of the test plots, weak points in the original GIS-DRP method were detected. Subsequently, it was possible to enhance the GIS-DRP approach by incorporating new discharge relevant parameters like topsoil sealing, extreme weather events and semipermeability of the substratum. Moreover, the improved GIS-DRP approach can be widely used in different landscapes and for different fields of application. The adapted method can now support foresters and decision makers in forestry planning, answer questions concerning the landscape water balance and peripheral water retention or provide extra information for sustainable forest planning in times of a changing climate.

  10. Renewables in residential development. An integrated GIS-based multicriteria approach for decentralized micro renewable energy production in new settlement development. A case study of the eastern metropolitan area of Cagliari, Sardinia, Italy

    Energy Technology Data Exchange (ETDEWEB)

    Palmas, Claudia [Cagliari Univ. (Italy). Dept. of Land Engineering; Abis, Emanuela [Cagliari Univ. (Italy). Dept. of Architecture; Haaren, Christina von [Leibniz Univ. of Hannover (Germany). Dept. of Environmental Planning; Lovett, Andrew [East Anglia Univ., Norwich (United Kingdom). School of Environmental Sciences

    2011-07-01

    In recent years there has been an increasing interest in using micro renewable energy sources to heat and power homes. However, planning has not yet developed methodological approaches for integrating such objectives of optimized energy efficiency with other environmental requirements and concerns of sustainable residential development. This study addresses such integration by first presenting an approach to assess the different potentials of the landscape for generating renewable energy (solar, wind, geothermic, biomass). Subsequently, optimized locations for residential development according to other sustainability criteria are identified and the two sets of results integrated by systematic GIS operations. The methodological approach for evaluating spatial variations in energy potential and producing the energy potential maps was based on existing methods for assessing the energy potential of the landscape which were adapted to the local scale and data availability. In the case of bioenergy potential a new method was developed. Other environmental criteria for deciding about sustainable locations for residential areas with different types of micro generation were identified through a survey of more than 100 expert respondents. This survey involved pairwise comparisons of relevant factors, which were then translated using the Analytical Hierarchy Process into relative weights. Subsequently these weights were applied to factor maps in a GIS via a weighted linear combination method to obtain suitable areas for new settlements and preferred locations for micro renewable technologies in the eastern metropolitan area of Cagliari, Sardinia. (orig.)

  11. GIS-BASED PREDICTION OF HURRICANE FLOOD INUNDATION

    Energy Technology Data Exchange (ETDEWEB)

    JUDI, DAVID [Los Alamos National Laboratory; KALYANAPU, ALFRED [Los Alamos National Laboratory; MCPHERSON, TIMOTHY [Los Alamos National Laboratory; BERSCHEID, ALAN [Los Alamos National Laboratory

    2007-01-17

    A simulation environment is being developed for the prediction and analysis of the inundation consequences for infrastructure systems from extreme flood events. This decision support architecture includes a GIS-based environment for model input development, simulation integration tools for meteorological, hydrologic, and infrastructure system models and damage assessment tools for infrastructure systems. The GIS-based environment processes digital elevation models (30-m from the USGS), land use/cover (30-m NLCD), stream networks from the National Hydrography Dataset (NHD) and soils data from the NRCS (STATSGO) to create stream network, subbasins, and cross-section shapefiles for drainage basins selected for analysis. Rainfall predictions are made by a numerical weather model and ingested in gridded format into the simulation environment. Runoff hydrographs are estimated using Green-Ampt infiltration excess runoff prediction and a 1D diffusive wave overland flow routing approach. The hydrographs are fed into the stream network and integrated in a dynamic wave routing module using the EPA's Storm Water Management Model (SWMM) to predict flood depth. The flood depths are then transformed into inundation maps and exported for damage assessment. Hydrologic/hydraulic results are presented for Tropical Storm Allison.

  12. TVA GIS-based biomass resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Noon, C.E. [Univ. of Tennessee, Knoxville, TN (United States)

    1993-12-31

    The focus of this paper is a computer-based system for estimating the costs of supplying wood fuel. The system is being developed for the Tennessee Valley Authority and is referred to as the Biomass Resource Assessment Version One (BRAVO) system. The main objective in developing the BRAVO system is to assist TVA in estimating the costs for supplying wood fuel to any one of its twelve coal-fired plants. The BRAVO system is developed within a Geographic Information System (GIS) platform and is designed to allow a user to perform {open_quotes}what if{close_quotes} analyses related to the costs of wood fuel supply. Three types of wood fuel are considered in the BRAVO system: mill residues, logging residues and short-rotation woody crops (SRWC). Each type of wood fuel has unique economic and supply characteristics. The input data for the system includes the specific locations, amount, and prices of the various types of wood fuel throughout the TVA region. The system input is completed by data on political boundaries, power plant locations, road networks and a model for estimating transportation costs as a function of distance. The result is a comprehensive system which includes information on all possible wood fuel supply joints, demand points and product movement costs. In addition, the BRAVO system has been designed to allow a user to perform sensitivity analysis on a variety of supply system parameters. This will enable TVA to thoroughly investigate the financial impacts of issues such as increased competition for wood fuel, environmental policies, fuel taxes, and regional economic cycles.

  13. TVA GIS-based biomass resource assessment

    International Nuclear Information System (INIS)

    Noon, C.E.

    1993-01-01

    The focus of this paper is a computer-based system for estimating the costs of supplying wood fuel. The system is being developed for the Tennessee Valley Authority and is referred to as the Biomass Resource Assessment Version One (BRAVO) system. The main objective in developing the BRAVO system is to assist TVA in estimating the cost for supplying wood fuel to any one of its twelve coal-fired power plants. The BRAVO system is developed within a Geographic Information System (GIS) platform and is designed to allow a user to perform open-quotes what ifclose quotes analyses related to the costs of wood fuel supply. Three types of wood fuel are considered in the Bravo system: mill residues, logging residues and short-rotation woody crops (SRWC). Each type of wood fuel has unique economic and supply characteristics. The input data for the system includes the specific locations, amounts, and prices of the various types of wood fuel throughout the TVA region. The system input is completed by data on political boundaries, power plant locations, road networks and a model for estimating transportation costs as a function of distance. The result is a comprehensive system which includes information on all possible wood fuel supply points, demand points and product movement costs. In additions, the BRAVO system has been designed to allow a user to perform sensitivity analysis on a variety of supply system parameters. This will enable TVA to thoroughly investigate the financial impacts of issues such as increased competition for wood fuel, environmental policies, fuel taxes, and regional economic cycles

  14. The Architecture of a Complex GIS & Spreadsheet Based DSS

    Directory of Open Access Journals (Sweden)

    Dinu Airinei

    2010-01-01

    Full Text Available The decision support applications available on today market use to combine the decision analysis of historical databased on On-Line Analytical Processing (OLAP products or spreadsheet pivot tables with some new reporting facilities as alerts or key performance indicators available in portal dashboards or in complex spreadsheet-like reports, both corresponding to a new approach of the field called Business Intelligence. Moreover the geographical features of GIS added to DSS applications become more and more required by many kinds of businesses. In fact they are more useful this way than as distinctive parts.The paper tries to present a certain DSS architecture based on the association between such approaches and technologies. The particular examples are meant to support all the theoretical arguments and to complete the understanding of the interaction schemas available.

  15. Tight-coupling of groundwater flow and transport modelling engines with spatial databases and GIS technology: a new approach integrating Feflow and ArcGIS

    Directory of Open Access Journals (Sweden)

    Ezio Crestaz

    2012-09-01

    Full Text Available Implementation of groundwater flow and transport numerical models is generally a challenge, time-consuming and financially-demanding task, in charge to specialized modelers and consulting firms. At a later stage, within clearly stated limits of applicability, these models are often expected to be made available to less knowledgeable personnel to support/design and running of predictive simulations within more familiar environments than specialized simulation systems. GIS systems coupled with spatial databases appear to be ideal candidates to address problem above, due to their much wider diffusion and expertise availability. Current paper discusses the issue from a tight-coupling architecture perspective, aimed at integration of spatial databases, GIS and numerical simulation engines, addressing both observed and computed data management, retrieval and spatio-temporal analysis issues. Observed data can be migrated to the central database repository and then used to set up transient simulation conditions in the background, at run time, while limiting additional complexity and integrity failure risks as data duplication during data transfer through proprietary file formats. Similarly, simulation scenarios can be set up in a familiar GIS system and stored to spatial database for later reference. As numerical engine is tightly coupled with the GIS, simulations can be run within the environment and results themselves saved to the database. Further tasks, as spatio-temporal analysis (i.e. for postcalibration auditing scopes, cartography production and geovisualization, can then be addressed using traditional GIS tools. Benefits of such an approach include more effective data management practices, integration and availability of modeling facilities in a familiar environment, streamlining spatial analysis processes and geovisualization requirements for the non-modelers community. Major drawbacks include limited 3D and time-dependent support in

  16. The Project-Approach to GIS as an Integrative Classroom Technology: An Environmental Case Study.

    Science.gov (United States)

    Gatrell, Jay D.; Oshiro, Kenji K.

    2001-01-01

    Explains how Geographic Information Systems (GIS) influences geography curricula and how project-based learning can be applied to GIS experiences. Introduces a project investigating non-geography college students' design and implementation of a environmental GIS application. (Contains 16 references.) (YDS)

  17. Partnering with Youth to Map Their Neighborhood Environments: A Multi-Layered GIS Approach

    Science.gov (United States)

    Topmiller, Michael; Jacquez, Farrah; Vissman, Aaron T.; Raleigh, Kevin; Miller-Francis, Jenni

    2014-01-01

    Mapping approaches offer great potential for community-based participatory researchers interested in displaying youth perceptions and advocating for change. We describe a multi-layered approach for gaining local knowledge of neighborhood environments that engages youth as co-researchers and active knowledge producers. By integrating geographic information systems (GIS) with environmental audits, an interactive focus group, and sketch mapping, the approach provides a place-based understanding of physical activity resources from the situated experience of youth. Youth report safety and a lack of recreational resources as inhibiting physical activity. Maps reflecting youth perceptions aid policy-makers in making place-based improvements for youth neighborhood environments. PMID:25423245

  18. An Approach to Teaching Applied GIS: Implementation for Local Organizations.

    Science.gov (United States)

    Benhart, John, Jr.

    2000-01-01

    Describes the instructional method, Client-Life Cycle GIS Project Learning, used in a course at Indiana University of Pennsylvania that enables students to learn with and about geographic information system (GIS). Discusses the course technical issues in GIS and an example project using this method. (CMK)

  19. SAGA GIS based processing of spatial high resolution temperature data

    International Nuclear Information System (INIS)

    Gerlitz, Lars; Bechtel, Benjamin; Kawohl, Tobias; Boehner, Juergen; Zaksek, Klemen

    2013-01-01

    Many climate change impact studies require surface and near surface temperature data with high spatial and temporal resolution. The resolution of state of the art climate models and remote sensing data is often by far to coarse to represent the meso- and microscale distinctions of temperatures. This is particularly the case for regions with a huge variability of topoclimates, such as mountainous or urban areas. Statistical downscaling techniques are promising methods to refine gridded temperature data with limited spatial resolution, particularly due to their low demand for computer capacity. This paper presents two downscaling approaches - one for climate model output and one for remote sensing data. Both are methodically based on the FOSS-GIS platform SAGA. (orig.)

  20. Research on Livable Community Evaluation Based on GIS

    Science.gov (United States)

    Yin, Zhangcai; Wu, Yang; Jin, Zhanghaonan; Zhang, Xu

    2018-01-01

    Community is the basic unit of the city. Research on livable community could provide a bottom-up research path for the realization of livable city. Livability is the total factor affecting the quality of community life. In this paper, livable community evaluation indexes are evaluated based on GIS and fuzzy comprehensive evaluation method. Then the sum-index and sub-index of community livability are both calculated. And community livable evaluation index system is constructed based on the platform of GIS. This study provides theoretical support for the construction and management of livable communities, so as to guide the development and optimization of city.

  1. Application of web-GIS approach for climate change study

    Science.gov (United States)

    Okladnikov, Igor; Gordov, Evgeny; Titov, Alexander; Bogomolov, Vasily; Martynova, Yuliya; Shulgina, Tamara

    2013-04-01

    Georeferenced datasets are currently actively used in numerous applications including modeling, interpretation and forecast of climatic and ecosystem changes for various spatial and temporal scales. Due to inherent heterogeneity of environmental datasets as well as their huge size which might constitute up to tens terabytes for a single dataset at present studies in the area of climate and environmental change require a special software support. A dedicated web-GIS information-computational system for analysis of georeferenced climatological and meteorological data has been created. It is based on OGC standards and involves many modern solutions such as object-oriented programming model, modular composition, and JavaScript libraries based on GeoExt library, ExtJS Framework and OpenLayers software. The main advantage of the system lies in a possibility to perform mathematical and statistical data analysis, graphical visualization of results with GIS-functionality, and to prepare binary output files with just only a modern graphical web-browser installed on a common desktop computer connected to Internet. Several geophysical datasets represented by two editions of NCEP/NCAR Reanalysis, JMA/CRIEPI JRA-25 Reanalysis, ECMWF ERA-40 Reanalysis, ECMWF ERA Interim Reanalysis, MRI/JMA APHRODITE's Water Resources Project Reanalysis, DWD Global Precipitation Climatology Centre's data, GMAO Modern Era-Retrospective analysis for Research and Applications, meteorological observational data for the territory of the former USSR for the 20th century, results of modeling by global and regional climatological models, and others are available for processing by the system. And this list is extending. Also a functionality to run WRF and "Planet simulator" models was implemented in the system. Due to many preset parameters and limited time and spatial ranges set in the system these models have low computational power requirements and could be used in educational workflow for better

  2. GOLD predictivity mapping in French Guiana using an expert-guided data-driven approach based on a regional-scale GIS

    Science.gov (United States)

    Cassard, Daniel; Billa, Mario; Lambert, Alain; Picot, Jean-Claude; Husson, Yves

    2008-05-01

    The realistic estimation of gold mining in French Guiana requires including the numerous illegal gold washing activities in predictivity mapping. The combination of a classical approach, based on the algebraic method of Knox-Robinson and Groves, with innovative processing grid-type geochemical and radiometric data, as well as cluster analysis technique provides a better understanding of the structure of studied mineralized areas.

  3. SCS-CN and GIS-based approach for identifying potential water harvesting sites in the Kali Watershed, Mahi River Basin, India

    Science.gov (United States)

    Ramakrishnan, D.; Bandyopadhyay, A.; Kusuma, K. N.

    2009-08-01

    The Kali sub-watershed is situated in the semi-arid region of Gujarat, India and forms a part of the Mahi River Watershed. This watershed receives an average annual rainfall of 900mm mainly between July and September. Due to high runoff potential, evapo-transpiration and poor infiltration, drought like situation prevails in this area from December to June almost every year. In this paper, augmentation of water resource is proposed by construction of runoff harvesting structures like check dam, percolation pond, farm pond, well and subsurface dyke. The site suitability for different water harvesting structures is determined by considering spatially varying parameters like runoff potential, slope, fracture pattern and micro-watershed area. GIS is utilised as a tool to store, analyse and integrate spatial and attribute information pertaining to runoff, slope, drainage and fracture. The runoff derived by SCS-CN method is a function of runoff potential which can be expressed in terms of runoff coefficient (ratio between the runoff and rainfall) which can be classified into three classes, viz., high (>40%), moderate (20-40%) and low (<20%). In addition to IMSD, FAO specifications for water harvesting/recharging structures, parameters such as effective storage, rock mass permeability are herein considered to augment effective storage. Using the overlay and decision tree concepts in GIS, potential water harvesting sites are identified. The derived sites are field investigated for suitability and implementation. In all, the accuracy of the site selection at implementation level varies from 80-100%.

  4. Mapping Potential Areas For Gold And Base Metals Mineralization In Southeastern Desert, Egypt: An Approach By Using Remote Sensing And GIS

    International Nuclear Information System (INIS)

    ElFouly, A.; Salem, H.

    2003-01-01

    Integration of Landsat-Thematic Mapper (TM), aero magnetic data, structural geology along with the known mineralization occurrences in the area are mainly the factors used to recognize favorable sites for structurally controlled mineralization at the northern part of the southeastern Desert of Egypt. Two knowledge-driven models were constructed based on a conceptual gold exploration model. The Density of Lineament Intersection (DLI) results from this study along with Dempster-Shafer (D-S) Belief approach show good results in delineating favorable mineralization areas. The basic assignment probability maps for the heat source, strong magnetism, hydrothermal alteration, geologic structure, and known mineralization occurrences in the area are the main D-S Belief approach recognition criteria component used for mineral exploration in the study area. The DLI method is maximizing the use of Landsat remote sensing data that could be used efficiently in the exploration for structurally controlled hydrothermal related mineralization. The DLI method results show higher resolution and accurate results for gold and base metals exploration. The high favorability areas by using the DLI method is 2196 Km 2 which are concise area than the D-S Belief approach for about 3976.5 Km 2 . These results are useful to be a strong base for planning accurate exploration program. The potential favorability maps of gold and base metals ore deposits from the northern part of the South Eastern Desert predicted the known areas of mineralization as well as identified high potential areas not known before with mineralization for future exploration

  5. WATGIS: A GIS-Based Lumped Parameter Water Quality Model

    Science.gov (United States)

    Glenn P. Fernandez; George M. Chescheir; R. Wayne Skaggs; Devendra M. Amatya

    2002-01-01

    A Geographic Information System (GIS)­based, lumped parameter water quality model was developed to estimate the spatial and temporal nitrogen­loading patterns for lower coastal plain watersheds in eastern North Carolina. The model uses a spatially distributed delivery ratio (DR) parameter to account for nitrogen retention or loss along a drainage network. Delivery...

  6. GIS-based bivariate statistical techniques for groundwater potential ...

    Indian Academy of Sciences (India)

    Ali Haghizadeh

    2017-11-23

    Nov 23, 2017 ... regions. This study shows the potency of two GIS-based data driven ... growth of these tools has also prepared another ..... Urban. 30467. 3. 0.06. 0.20. 0.74. 0.80. −0.64. Distance from road ..... and artificial neural networks for potential groundwater .... ping: A case study at Mehran region, Iran; Catena 137.

  7. GIS Teacher Training: Empirically-Based Indicators of Effectiveness

    Science.gov (United States)

    Höhnle, Steffen; Fögele, Janis; Mehren, Rainer; Schubert, Jan Christoph

    2016-01-01

    In spite of various actions, the implementation of GIS (geographic information systems) in German schools is still very low. In the presented research, teaching experts as well as teaching novices were presented with empirically based constraints for implementation stemming from an earlier survey. In the process of various group discussions, the…

  8. GIS-Based bivariate statistical techniques for groundwater potential ...

    Indian Academy of Sciences (India)

    24

    This study shows the potency of two GIS-based data driven bivariate techniques namely ... In the view of these weaknesses , there is a strong requirement for reassessment of .... Font color: Text 1, Not Expanded by / Condensed by , ...... West Bengal (India) using remote sensing, geographical information system and multi-.

  9. Quantification of benzene in groundwater sources and risk analysis in a popular South Indian Pilgrimage City – A GIS based approach

    Directory of Open Access Journals (Sweden)

    M. Senthil kumar

    2017-05-01

    Full Text Available The present research work quantified the concentration of benzene in a total of hundred groundwater samples at the proximity of petrol bunks and residential places in Madurai District. The average values recorded in Jan 2011, Feb 2011 and Mar 2011 were 0.100 mg L−1 (10 times of PL, 0.138 mg L−1 (14 times of PL and 0.060 mg L−1 (6 times of PL respectively. A significant variation in the benzene level during February–March 2011 was validated through Student’s t-test analysis. Hierarchical cluster analysis using dendograms revealed the un-symmetric distribution of benzene during the study period. The cancer risk analysis at corporate locations among children was seven folds higher as compared to the risk of adults. The benzene concentration levels are interpreted using Arc Geographical Information System (Arc GIS through thematic maps.

  10. GIS based procedure of cumulative environmental impact assessment.

    Science.gov (United States)

    Balakrishna Reddy, M; Blah, Baiantimon

    2009-07-01

    Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

  11. 348 A GIS AND REMOTE SENSING APPROACH TO ASSESSMENT ...

    African Journals Online (AJOL)

    Osondu

    remote sensing data for Uyo for the periods 1969, 1978, 1988, 2001 and 2004; evaluate the ... geographical information system (GIS) technology was applied to carry out this research. Field ..... preventing erosion, landslides, and making the.

  12. Distribution ozone concentration in Klang Valley using GIS approaches

    Science.gov (United States)

    Sulaiman, A.; Rahman, A. A. Ab; Maulud, K. N. Abdul; Latif, M. T.; Ahmad, F.; Wahid, M. A. Abdul; Ibrahim, M. A.; Halim, N. D. Abdul

    2017-05-01

    Today, ozone has become one of the main air pollutants in Malaysia. The high ozone precursor concentrations have been encouraging the ozone production. The development of the Klang Valley, Malaysia has many types of physical activities such as urban commercial, industrial area, settlement area and others, which has increased the risk of atmospheric pollution. The purpose of this paper is to determine the spatial distribution between types of land use and ozone concentration that are occurred in the year 2014. The study areas for this paper include Shah Alam, Kajang, Petaling Jaya and Port Klang. Distribution of ozone concentration will be showed via spatial analysis tools in Geographic Information Systems (GIS) approached and the types of land use will be extracted using Remote Sensing technique. The result showed 97 ppb (parts-per-billion, 10-9) and 161 ppb recorded at Port Klang and Shah Alam respectively that are mainly represented by the settlement area. Therefore, the physical land use need to be monitor and controlled by the government in order to make sure the ozone production for daily per hour will not exceed the regulation allowed.

  13. Distribution ozone concentration in Klang Valley using GIS approaches

    International Nuclear Information System (INIS)

    Sulaiman, A; Ab Rahman, A A; Abdul Maulud, K N; Abdul Wahid, M A; Ibrahim, M A; Latif, M T; Abdul Halim, N D; Ahmad, F

    2017-01-01

    Today, ozone has become one of the main air pollutants in Malaysia. The high ozone precursor concentrations have been encouraging the ozone production. The development of the Klang Valley, Malaysia has many types of physical activities such as urban commercial, industrial area, settlement area and others, which has increased the risk of atmospheric pollution. The purpose of this paper is to determine the spatial distribution between types of land use and ozone concentration that are occurred in the year 2014. The study areas for this paper include Shah Alam, Kajang, Petaling Jaya and Port Klang. Distribution of ozone concentration will be showed via spatial analysis tools in Geographic Information Systems (GIS) approached and the types of land use will be extracted using Remote Sensing technique. The result showed 97 ppb (parts-per-billion, 10 -9 ) and 161 ppb recorded at Port Klang and Shah Alam respectively that are mainly represented by the settlement area. Therefore, the physical land use need to be monitor and controlled by the government in order to make sure the ozone production for daily per hour will not exceed the regulation allowed. (paper)

  14. SOFTWARE ARCHITECTURE DESIGN OF GIS WEB SERVICE AGGREGATION BASED ON SERVICE GROUP

    Directory of Open Access Journals (Sweden)

    J.-C. Liu

    2012-08-01

    Full Text Available Based on the analysis of research status of domestic and international GIS web service aggregation and development tendency of public platform of GIS web service, the paper designed software architecture of GIS web service aggregation based on GIS web service group. Firstly, using heterogeneous GIS services model, the software architecture converted a variety of heterogeneous services to a unified interface of GIS services, and divided different types of GIS services into different service groups referring to description of GIS services. Secondly, a service aggregation process model was designed. This model completed the task of specific service aggregation instance, by automatically selecting member GIS Web services in the same service group. Dynamic capabilities and automatic adaptation of GIS Web services aggregation process were achieved. Thirdly, this paper designed a service evaluation model of GIS web service aggregation based on service group from three aspects, i.e. GIS Web Service itself, networking conditions and service consumer. This model implemented effective quality evaluation and performance monitoring of GIS web service aggregation. It could be used to guide the execution, monitor and service selection of aggregation process. Therefore, robustness of aggregated GIS web service was improved. Finally, the software architecture has been widely used in public platform of GIS web service and a number of geo-spatial framework constructions for digital city in Sichuan Province, and aggregated various GIS web services such as World Map(National Public Platform of Geo-spatial Service, ArcGIS, SuperMap, MapGIS, NewMap etc. Applications of items showed that this software architecture was practicability.

  15. A GIS Approach to Evaluate Infrastructure Variables Influencing the Occurrence of Traffic Accidents in Urban Roads

    Directory of Open Access Journals (Sweden)

    Murat Selim Çepni

    2017-03-01

    Full Text Available Several studies worldwide have been developed that seek to explain the occurrence of traffic accidents from different perspectives. The analyses have addressed legal perspectives, technical attributes of vehicles and infrastructure as well as the psychological, behavioral and socio-economic components of the road system users. Recently, some analysis techniques based on the use of Geographic Information Systems (GIS have been used, which allow the generation of spatial distribution maps, models and risk estimates from a spatial perspective. Sometimes analyses of traffic accidents are performed using quantitative statistical techniques, which place significant importance on the evolution of accidents. Studies such as those in references have shown that conventional statistical models are sometimes inadequate to model the frequency of traffic accidents, as they may provide erroneous inferences. GIS approach has been used to explore different spatial and temporal visualization technologies to reveal accident patterns and significant factors relating to vehicle crashes, or as a management system for accident analysis and the determination of hot spots. This paper examines the relationship between urban road accidents and variables related to road infrastructure, environment and traffic volumes. Some accident-prone sections in the city of Kocaeli are specifically identified by GIS tools. Urban road accidents in Kocaeli are a serious problem and it is believed that accidents can be related to infrastructure characteristics. The study aimed to establish the relationship between urban road accidents and the road infrastructure variables and revealed some possible accident prone locations for the period of 2013 and 2015 in Kocaeli city

  16. Integrated landscape-based approach of remote sensing, GIS, and physical modelling to study the hydrological connectivity of wetlands to the downstream water: progress and challenge

    Science.gov (United States)

    Yeo, I. Y.

    2015-12-01

    We report the recent progress on our effort to improve the mapping of wetland dynamics and the modelling of its functioning and hydrological connection to the downstream waters. Our study focused on the Coastal Plain of the Chesapeake Bay Watershed (CBW), the Delmarva Peninsula, where the most of wetlands in CBW are densely distributed. The wetland ecosystem plays crucial roles in improving water quality and ecological integrity for the downstream waters and the Chesapeake Bay, and headwater wetlands in the region, such as Delmarva Bay, are now subject to the legal protection under the Clean Water Rules. We developed new wetland maps using time series Landsat images and a highly accurate LiDAR map over last 30 years. These maps show the changes in surface water fraction at a 30-m grid cell at annual time scale. Using GIS, we analyse these maps to characterize changing dynamics of wetland inundation due to the physical environmental factors (e.g., weather variability, tide) and assessed the hydrological connection of wetlands to the downstream water at the watershed scale. Focusing on the two adjacent watersheds in the upper region of the Choptank River Basin, we study how wetland inundation dynamics and the hydrologic linkage of wetlands to downstream water would vary by the local hydrogeological setting and attempt to identify the key landscape factors affecting the wetland ecosystems and functioning. We then discuss the potential of using remote sensing products to improve the physical modelling of wetlands from our experience with SWAT (Soil and Water Assessment Tool).

  17. Teaching Introductory GIS Programming to Geographers Using an Open Source Python Approach

    Science.gov (United States)

    Etherington, Thomas R.

    2016-01-01

    Computer programming is not commonly taught to geographers as a part of geographic information system (GIS) courses, but the advent of NeoGeography, big data and open GIS means that programming skills are becoming more important. To encourage the teaching of programming to geographers, this paper outlines a course based around a series of…

  18. GIS-Based Planning and Modeling for Renewable Energy: Challenges and Future Research Avenues

    Directory of Open Access Journals (Sweden)

    Bernd Resch

    2014-05-01

    Full Text Available In the face of the broad political call for an “energy turnaround”, we are currently witnessing three essential trends with regard to energy infrastructure planning, energy generation and storage: from planned production towards fluctuating production on the basis of renewable energy sources, from centralized generation towards decentralized generation and from expensive energy carriers towards cost-free energy carriers. These changes necessitate considerable modifications of the energy infrastructure. Even though most of these modifications are inherently motivated by geospatial questions and challenges, the integration of energy system models and Geographic Information Systems (GIS is still in its infancy. This paper analyzes the shortcomings of previous approaches in using GIS in renewable energy-related projects, extracts distinct challenges from these previous efforts and, finally, defines a set of core future research avenues for GIS-based energy infrastructure planning with a focus on the use of renewable energy. These future research avenues comprise the availability base data and their “geospatial awareness”, the development of a generic and unified data model, the usage of volunteered geographic information (VGI and crowdsourced data in analysis processes, the integration of 3D building models and 3D data analysis, the incorporation of network topologies into GIS, the harmonization of the heterogeneous views on aggregation issues in the fields of energy and GIS, fine-grained energy demand estimation from freely-available data sources, decentralized storage facility planning, the investigation of GIS-based public participation mechanisms, the transition from purely structural to operational planning, data privacy aspects and, finally, the development of a new dynamic power market design.

  19. Identification of artificial groundwater recharging zone using a GIS-based fuzzy logic approach: a case study in a coal mine area of the Damodar Valley, India

    Science.gov (United States)

    Tiwari, Ashwani Kumar; Lavy, Muriel; Amanzio, Gianpiero; De Maio, Marina; Singh, Prasoon Kumar; Mahato, Mukesh Kumar

    2017-12-01

    The West Bokaro coalfield is a richest coal-mining belt in the Damodar Valley, India. The extensive mining of the area has resulted in disruption of the groundwater availability in terms of both quantity and quality. This has led to a drinking water crisis, especially during the pre-monsoon period in the West Bokaro coalfield area. The characterization of the hydrogeological system and the artificial recharging of the aquifers might help to better manage the problem of the groundwater-level depletion. For this purpose, seven important hydrogeological factors (water depth, slope, drainage, soil, infiltration, lithology, and landuse) have been considered to define the most suitable locations for artificial groundwater recharging in the mining area. Different thematic maps were prepared from existing maps and data sets, remote-sensing images, and field investigations for identification of the most suitable locations for artificial recharge. Thematic layers for these parameters were prepared, classified, weighted, and integrated into a geographic information system (GIS) environment by means of fuzzy logic. The results of the study indicate that about 29 and 31% of the area are very suitable and suitable for recharging purposes in the West Bokaro coalfield. However, the rest of the area is moderate to unsuitable for recharging due to the ongoing mining and related activities in the study area. The groundwater recharging map of the study area was validated with measured electrical conductivity (EC) values in the groundwater, and it indicated that validation can be accepted for the identification of groundwater recharging sites. These findings are providing useful information for the proper planning and sustainable management of the groundwater resources in the study area.

  20. Land use/cover disturbance due to tourism in Jeseníky Mountain, Czech Republic: A remote sensing and GIS based approach

    Directory of Open Access Journals (Sweden)

    Mukesh Singh Boori

    2015-06-01

    Full Text Available The Jeseníky Mountains tourism in Czech Republic is unique for its floristic richness. This is caused mainly by the altitude division and polymorphism of the landscape, climate and soil structure. This study assesses the impacts of tourism on the land cover in the Jeseníky Mountain region by comparing multi-temporal Landsat imageries (1991, 2001 and 2013 to describe the rate and extent of land-cover changes. This was achieved through spectral classification of different land cover classes and by assessing the change in forest; settlements; pasture and agriculture in relation to increasing distances (5, 10 and 15 km from three tourism sites with the help of ArcGIS software. The results indicate that the area was deforested (11.13% from 1991 to 2001 than experienced forest regrowth (6.71% from 2001 to 2013. In the first decade pasture and agriculture areas increased and then in next decade decreased. The influence of tourism facilities on land cover is also variable. Around each of the tourism site sampled, there was a general trend of forest removal decreasing as the distance from each village increased, which indicates tourism does have a negative impact on forests. However there was an opposite trend from 2001 to 2013 that indicates conservation area. The interplay among global (tourism, climate, regional (national policies, large-river management and local (construction and agriculture, energy and water sources to support the tourism industry factors drives a distinctive but complex pattern of land-use and land-cover disturbance.

  1. Landslides along Highways: GIS-based Inventory and Planning Issues

    Science.gov (United States)

    Jaeger, Ann-Kathrin; Klose, Martin; Damm, Bodo

    2015-04-01

    assess landslide impacts and the effectiveness of measures for their mitigation. The landslide inventory is part of an ongoing study concerned with the problems of damage financing at low-volume roads in mountain areas with shrinking populations and fiscal deficits. Using the example of the Harz Mountains, a key research question refers to a comparison of the costs necessary to spend for safe road operations with the benefits from providing traffic connections to landslide-prone rural communities. This study combines the damage and loss data stored in the inventory with different data sets on traffic density, local population, and road financing. The research results contribute to the development of planning strategies for cost-efficient maintenance of highway infrastructures exposed to landslide hazards. References Bhandary, N.P., Yatabe, R., Dahal, R.K., Hasegawa, S., Inagaki, H., 2013. Areal distribution of large-scale landslides along highway corridors in central Nepal. Georisk 7, 1-20. Hungr, O., Evans, S.G., Hazzard, J., 1999. Magnitude and frequency of rock falls and rockslides along the main transportation corridors of southwestern British Columbia. Canadian Geotechnical Journal 36, 224-238 Klose, M., Damm, B., Terhorst, B., 2014b. Landslide cost modeling for transportation infrastructures: a methodological approach. Landslides, DOI 10.1007/s10346-014-0481-1. Saha, A.K., Arora, M.K., Gupta, R.P., Virdi, M.L., Csaplovics, E., 2005. GIS-based route planning in landslide-prone areas. International Journal of Geographical Information Science 19, 1149-1175.

  2. gis-based hydrological model based hydrological model upstream

    African Journals Online (AJOL)

    eobe

    (GIS) environment to simulate various parame attributed to a ... water, sediment and agricultural chem large complex .... The 90m resolution topography data (see Figure 2) used for this .... results of the calibration and validation exercise are as.

  3. Environmental applications based on GIS and GRID technologies

    Science.gov (United States)

    Demontis, R.; Lorrai, E.; Marrone, V. A.; Muscas, L.; Spanu, V.; Vacca, A.; Valera, P.

    2009-04-01

    In the last decades, the collection and use of environmental data has enormously increased in a wide range of applications. Simultaneously, the explosive development of information technology and its ever wider data accessibility have made it possible to store and manipulate huge quantities of data. In this context, the GRID approach is emerging worldwide as a tool allowing to provision a computational task with administratively-distant resources. The aim of this paper is to present three environmental applications (Land Suitability, Desertification Risk Assessment, Georesources and Environmental Geochemistry) foreseen within the AGISGRID (Access and query of a distributed GIS/Database within the GRID infrastructure, http://grida3.crs4.it/enginframe/agisgrid/index.xml) activities of the GRIDA3 (Administrator of sharing resources for data analysis and environmental applications, http://grida3.crs4.it) project. This project, co-funded by the Italian Ministry of research, is based on the use of shared environmental data through GRID technologies and accessible by a WEB interface, aimed at public and private users in the field of environmental management and land use planning. The technologies used for AGISGRID include: - the client-server-middleware iRODS™ (Integrated Rule-Oriented Data System) (https://irods.org); - the EnginFrame system (http://www.nice-italy.com/main/index.php?id=32), the grid portal that supplies a frame to make available, via Intranet/Internet, the developed GRID applications; - the software GIS GRASS (Geographic Resources Analysis Support System) (http://grass.itc.it); - the relational database PostgreSQL (http://www.posgresql.org) and the spatial database extension PostGis; - the open source multiplatform Mapserver (http://mapserver.gis.umn.edu), used to represent the geospatial data through typical WEB GIS functionalities. Three GRID nodes are directly involved in the applications: the application workflow is implemented at the CRS4 (Pula

  4. A GIS-based Power Transmission Management Information System

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Based on analyzing the shortcomings of electric power enterprise in traditional operation pattern,this paper combines components GIS with the application of management information system,and uses the structure which unifies three layers C/S and B/S.Also,proposed using the GPS intellectualization patrol.This may be useful to guarantees the transmission line’s operation to be safe and stable.

  5. GIS Based Measurement and Regulatory Zoning of Urban Ecological Vulnerability

    Directory of Open Access Journals (Sweden)

    Xiaorui Zhang

    2015-07-01

    Full Text Available Urban ecological vulnerability is measured on the basis of ecological sensitivity and resilience based on the concept analysis of vulnerability. GIS-based multicriteria decision analysis (GIS-MCDA methods are used, supported by the spatial analysis tools of GIS, to define different levels of vulnerability for areas of the urban ecology. These areas are further classified into different types of regulatory zones. Taking the city of Hefei in China as the empirical research site, this study uses GIS-MCDA, including the index system, index weights and overlay rules, to measure the degree of its ecological vulnerability on the GIS platform. There are eight indices in the system. Raking and analytical hierarchy process (AHP methods are used to calculate index weights according to the characteristics of the index system. The integrated overlay rule, including selection of the maximum value, and weighted linear combination (WLC are applied as the overlay rules. In this way, five types of vulnerability areas have been classified as follows: very low vulnerability, low vulnerability, medium vulnerability, high vulnerability and very high vulnerability. They can be further grouped into three types of regulatory zone of ecological green line, ecological grey line and ecological red line. The study demonstrates that ecological green line areas are the largest (53.61% of the total study area and can be intensively developed; ecological grey line areas (19.59% of the total area can serve as the ecological buffer zone, and ecological red line areas (26.80% cannot be developed and must be protected. The results indicate that ecological green line areas may provide sufficient room for future urban development in Hefei city. Finally, the respective regulatory countermeasures are put forward. This research provides a scientific basis for decision-making around urban ecological protection, construction and sustainable development. It also provides theoretical method

  6. Application of GIS Technology - cadastral base of the municipality of Gostivar

    OpenAIRE

    Serafimoski, Toni

    2011-01-01

    In the thesis is presented modern GIS technology and its application in the field of cadastre. GIS technology is essentially based on the display and information processing related to given geographical coordinates. In the paper is implemented GIS software package Microstation, widely applied in the field of cadastre. The paper developed model using data from the cadastre of the municipality of Gostivar. Applied GIS technology opens up wide possibilities of processing of cadastral data,...

  7. Hydropower systems planning in distribution networks based on GIS

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez-Rosado, I.J.; Zorzano-Santamaria, P.; Fernandez-Jiminez, L.A.; Garcia-Garrido, E.; Zorzano-Alba, E.; Lara-Santillan, P.M.; Mendoza-Villena, M. [La Rioja Univ., La Rioja (Spain). Dept. of Electrical Engineering

    2005-07-01

    Planning models for hydraulic energy systems developed with a new computational geographic information system (GIS) tool were presented. The GIS tool was used to identify sections of rivers that are suitable for small-scale run-of-river hydropower generation in the La Rioja region of Spain. The tool was also used to evaluate economic data related to financing grants, technological costs, installation costs, and forecast demands for various consumption scenarios. Case studies of 2 hydropower systems were used to test the tool. The planning models were based on levelized electric costs (LEC) of run-of-river hydropower systems, and enabled the systems to be analyzed in isolation as well as when connected to an existing electricity network. Results of the modelling studies showed that the tool is capable of analyzing the LEC of potential hydropower systems in a range of different scenarios while maintaining the geographic characteristics and requirements of individual regions. 7 refs., 4 figs.

  8. A geographic approach to modelling human exposure to traffic air pollution using GIS. Separate appendix report

    Energy Technology Data Exchange (ETDEWEB)

    Solvang Jensen, S.

    1998-10-01

    A new exposure model has been developed that is based on a physical, single media (air) and single source (traffic) micro environmental approach that estimates traffic related exposures geographically with the postal address as exposure indicator. The micro environments: residence, workplace and street (road user exposure) may be considered. The model estimates outdoor levels for selected ambient air pollutants (benzene, CO, NO{sub 2} and O{sub 3}). The influence of outdoor air pollution on indoor levels can be estimated using average (I/O-ratios. The model has a very high spatial resolution (the address), a high temporal resolution (one hour) and may be used to predict past, present and future exposures. The model may be used for impact assessment of control measures provided that the changes to the model inputs are obtained. The exposure model takes advantage of a standard Geographic Information System (GIS) (ArcView and Avenue) for generation of inputs, for visualisation of input and output, and uses available digital maps, national administrative registers and a local traffic database, and the Danish Operational Street Pollution Model (OSPM). The exposure model presents a new approach to exposure determination by integration of digital maps, administrative registers, a street pollution model and GIS. New methods have been developed to generate the required input parameters for the OSPM model: to geocode buildings using cadastral maps and address points, to automatically generate street configuration data based on digital maps, the BBR and GIS; to predict the temporal variation in traffic and related parameters; and to provide hourly background levels for the OSPM model. (EG)

  9. A geographic approach to modelling human exposure to traffic air pollution using GIS

    Energy Technology Data Exchange (ETDEWEB)

    Solvang Jensen, S.

    1998-10-01

    A new exposure model has been developed that is based on a physical, single media (air) and single source (traffic) micro environmental approach that estimates traffic related exposures geographically with the postal address as exposure indicator. The micro environments: residence, workplace and street (road user exposure) may be considered. The model estimates outdoor levels for selected ambient air pollutants (benzene, CO, NO{sub 2} and O{sub 3}). The influence of outdoor air pollution on indoor levels can be estimated using average (I/O-ratios. The model has a very high spatial resolution (the address), a high temporal resolution (one hour) and may be used to predict past, present and future exposures. The model may be used for impact assessment of control measures provided that the changes to the model inputs are obtained. The exposure model takes advantage of a standard Geographic Information System (GIS) (ArcView and Avenue) for generation of inputs, for visualisation of input and output, and uses available digital maps, national administrative registers and a local traffic database, and the Danish Operational Street Pollution Model (OSPM). The exposure model presents a new approach to exposure determination by integration of digital maps, administrative registers, a street pollution model and GIS. New methods have been developed to generate the required input parameters for the OSPM model: to geocode buildings using cadastral maps and address points, to automatically generate street configuration data based on digital maps, the BBR and GIS; to predict the temporal variation in traffic and related parameters; and to provide hourly background levels for the OSPM model. (EG) 109 refs.

  10. SVM-based Partial Discharge Pattern Classification for GIS

    Science.gov (United States)

    Ling, Yin; Bai, Demeng; Wang, Menglin; Gong, Xiaojin; Gu, Chao

    2018-01-01

    Partial discharges (PD) occur when there are localized dielectric breakdowns in small regions of gas insulated substations (GIS). It is of high importance to recognize the PD patterns, through which we can diagnose the defects caused by different sources so that predictive maintenance can be conducted to prevent from unplanned power outage. In this paper, we propose an approach to perform partial discharge pattern classification. It first recovers the PRPD matrices from the PRPD2D images; then statistical features are extracted from the recovered PRPD matrix and fed into SVM for classification. Experiments conducted on a dataset containing thousands of images demonstrates the high effectiveness of the method.

  11. The use of GIS-based support of recreational trail planning by local governments

    DEFF Research Database (Denmark)

    Olafsson, Anton Stahl; Skov-Petersen, Hans

    2014-01-01

    In the last decade, multiple GIS-based planning support systems have been developed in order to improve the basis for spatial planning. Recent research has focused on problems regarding a lack of utilisation or barriers to the use of advanced GIS and GIS-based planning support systems in planning...... applications. This paper discusses these research findings in the context of outdoor recreational planning by local governments in Denmark. According to a national survey of municipal planners, GIS-based planning support is widely used in Denmark, but more GIS is needed and is being requested for local outdoor...... recreation planning. However, considerable differences exist between the ways municipalities assess their need for and use of GIS planning support. These differences are explored in more detail using a factor analysis of planning variables and uses of GIS. Three situations are described: 1) extensive network...

  12. Application of a GIS-/remote sensing-based approach for predicting groundwater potential zones using a multi-criteria data mining methodology.

    Science.gov (United States)

    Mogaji, Kehinde Anthony; Lim, Hwee San

    2017-07-01

    This study integrates the application of Dempster-Shafer-driven evidential belief function (DS-EBF) methodology with remote sensing and geographic information system techniques to analyze surface and subsurface data sets for the spatial prediction of groundwater potential in Perak Province, Malaysia. The study used additional data obtained from the records of the groundwater yield rate of approximately 28 bore well locations. The processed surface and subsurface data produced sets of groundwater potential conditioning factors (GPCFs) from which multiple surface hydrologic and subsurface hydrogeologic parameter thematic maps were generated. The bore well location inventories were partitioned randomly into a ratio of 70% (19 wells) for model training to 30% (9 wells) for model testing. Application results of the DS-EBF relationship model algorithms of the surface- and subsurface-based GPCF thematic maps and the bore well locations produced two groundwater potential prediction (GPP) maps based on surface hydrologic and subsurface hydrogeologic characteristics which established that more than 60% of the study area falling within the moderate-high groundwater potential zones and less than 35% falling within the low potential zones. The estimated uncertainty values within the range of 0 to 17% for the predicted potential zones were quantified using the uncertainty algorithm of the model. The validation results of the GPP maps using relative operating characteristic curve method yielded 80 and 68% success rates and 89 and 53% prediction rates for the subsurface hydrogeologic factor (SUHF)- and surface hydrologic factor (SHF)-based GPP maps, respectively. The study results revealed that the SUHF-based GPP map accurately delineated groundwater potential zones better than the SHF-based GPP map. However, significant information on the low degree of uncertainty of the predicted potential zones established the suitability of the two GPP maps for future development of

  13. GIS-based approach for potential analysis of solar PV generation at the regional scale: A case study of Fujian Province

    International Nuclear Information System (INIS)

    Sun, Yan-wei; Hof, Angela; Wang, Run; Liu, Jian; Lin, Yan-jie; Yang, De-wei

    2013-01-01

    Spatial variation of solar energy is crucial for the estimation of the regional potential and selection of construction location. This paper presents a case study of using high resolution grid map of solar radiation combined with the other restriction factors to evaluate the comprehensive potential analysis of solar PV generation at the regional scale, in order to present a framework of decision support tool for solar energy management in a regional area. The cost of PV generation is calculated based on the geographical distribution of technical potential. Moreover, geospatial supply curve (GSC) is employed to portray the evolution of available potential of photovoltaics (PV) generation with the increase of the generation cost. By integrating the economic evaluation variables of net present value and simple payback period, grid-based economic feasibility of PV generation project is then carried out under two feed-in-tariff scenarios. Finally, total CO 2 reduction potential and its spatial distribution in the study area are calculated. The results confirm that PV technology provides high potential for roof-top application and large-scale PV stations. Additionally, determining a reasonable feed-in tariff is essential for expanding the application of solar PV energy. The findings improve understanding of regional renewable energy strategies and the supply/demand assessment. - Highlights: • We developed a grid-based comprehensive potential analysis framework of solar energy at the regional scale. • We evaluated the technical potential of solar PV generation. • We calculated the cost of PV generation and got the geospatial supply curve (GSC) of Fujian Province. • PV technology provides high potential for roof-top application and large-scale PV stations. • Determining a reasonable feed-in tariff is essential for expanding the application of solar PV energy

  14. A GIS-BASED ENVIRONMENTAL HEALTH INFORMATION SOURCE FOR MALAYSIAN CONTEXT

    OpenAIRE

    Lau Tiu Chung; Lau Bee Theng; Henry Lee Seldon

    2013-01-01

    In this paper, we propose a GIS-based system for collection and targeted distribution of latest alerts and real-time environmental factors to the Malaysian population. We call it the Environmental Health Management System (EHMS). This GIS-based system is designed to facilitate and encourage research into environmental health quality issues by providing a comprehensive tracking and monitoring tool. This GIS-based system is embedded with Google Maps API and Geocoding API services to visualize t...

  15. GIS-Based Population Model Applied to Nevada Transportation Routes

    International Nuclear Information System (INIS)

    Mills, G.S.; Neuhauser, K.S.

    1999-01-01

    Recently, a model based on geographic information system (GIS) processing of US Census Block data has made high-resolution population analysis for transportation risk analysis technically and economically feasible. Population density bordering each kilometer of a route may be tabulated with specific route sections falling into each of three categories (Rural, Suburban or Urban) identified for separate risk analysis. In addition to the improvement in resolution of Urban areas along a route, the model provides a statistically-based correction to population densities in Rural and Suburban areas where Census Block dimensions may greatly exceed the 800-meter scale of interest. A semi-automated application of the GIS model to a subset of routes in Nevada (related to the Yucca Mountain project) are presented, and the results compared to previous models including a model based on published Census and other data. These comparisons demonstrate that meaningful improvement in accuracy and specificity of transportation risk analyses is dependent on correspondingly accurate and geographically-specific population density data

  16. GIS approach to the definition of capacity and generation ceilings of renewable energy technologies

    International Nuclear Information System (INIS)

    Dominguez Bravo, Javier; Garcia Casals, Xavier; Pinedo Pascua, Irene

    2007-01-01

    There are no discrepancies about the advantages of achieving a sustainable energy system based on locally available natural resources. However, supporters of green energy generation system were lacking some scientific and consistent study to defend their proposals. In order to have such a study, Greenpeace commissioned Technology Research Institute at the Pontificia Comillas University to carry out a study to assess ceilings for the potential and generation of renewable technologies in Spain. It demonstrates firstly a far greater renewable potential than the targets set by long term policies, and secondly, the viability of meeting the entire electricity demand projected for 2050. GIS was used to add the geographical dimension to the original project in order to generate a technical analysis linked to the specific constrictions imposed by territory (natural and anthropogenic) and not just designed to cover a certain demand. Therefore, GIS spatial analysis took into account local conditions producing a more accurate assessment than evaluations made upon 'virtual' electrical spaces. This approach could be applied to other small scale general studies in order to assess the maximum contribution of renewable energy sources to particular energy generation mix and to help set development policies supporting high participation of renewable technologies

  17. PROMAB-GIS: A GIS based Tool for Estimating Runoff and Sediment Yield in running Waters

    Science.gov (United States)

    Jenewein, S.; Rinderer, M.; Ploner, A.; Sönser, T.

    2003-04-01

    In recent times settlements have expanded, traffic and tourist activities have increased in most alpine regions. As a consequence, on the one hand humans and goods are affected by natural hazard processes more often, while on the other hand the demand for protection by both technical constructions and planning measures carried out by public authorities is growing. This situation results in an ever stronger need of reproducibility, comparability, transparency of all methods applied in modern natural hazard management. As a contribution to a new way of coping this situation Promab-GIS Version 1.0 has been developed. Promab-Gis has been designed as a model for time- and space-dependent determination of both runoff and bedload transport in rivers of small alpine catchment areas. The estimation of the unit hydrograph relies upon the "rational formula" and the time-area curves of the watershed. The time area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. The sediment yield is estimated for each cell of the channel network by determining the actual process type (erosion, transport or accumulation). Two types of transport processes are considered, sediment transport and debris flows. All functions of Promab-GIS are integrated in the graphical user interface of ArcView as pull-up menus and tool buttons. Hence the application of Promab-GIS does not rely on a sophisticated knowledge of GIS in general, respectively the ArcView software. However, despite the use of computer assistance, Promab-GIS still is an expert support system. In order to obtain plausible results, the users must be familiar with all the relevant processes controlling runoff and sediment yield in torrent catchments.

  18. A GIS Approach to Prioritizing Habitat for Restoration Using Neotropical Migrant Songbird Criteria

    Science.gov (United States)

    Holzmueller, Eric J.; Gaskins, Michael D.; Mangun, Jean C.

    2011-07-01

    Restoration efforts to increase wildlife habitat quality in agricultural landscapes have limited funding and are typically done on a first come, first serve basis. In order to increase the efficiency of these restoration efforts, a prioritized ranking system is needed to obtain the greatest increase in habitat quality possible for the fewest amount of hectares restored. This project examines the use of a GIS based multi-criteria approach to prioritize lands for reforestation along the Kaskaskia River in Illinois. Loss of forested area and corresponding increase in forest fragmentation has decreased songbird habitat quality across the Midwestern United States. We prioritized areas for reforestation based on nine landscape metrics: available agricultural land, forest cover gaps, edge density, proximity to river, 200 m corridor area, total forest core area, fringe core area, distance to primary core value, and primary core area. The multi-criteria analysis revealed that high priority areas for reforestation were most likely to be close to the riparian corridor and existing large blocks of forest. Analysis of simulated reforestation (0, 0.5, 1.0, 5.0 10.0, 25.0, and 50.0% of highest priority parcels reforested) revealed different responses for multiple landscape metrics used to quantify forest fragmentation following reforestation, but indicated that the study area would get the greatest rate of return on reforestation efforts by reforesting 10.0% of the highest priority areas. This project demonstrates how GIS and a multi-criteria analysis approach can be used to increase the efficiency of restoration projects. This approach should be considered by land managers when attempting to identify the location and quantity of area for restoration within a landscape.

  19. A Javascript GIS Platform Based on Invocable Geospatial Web Services

    Directory of Open Access Journals (Sweden)

    Konstantinos Evangelidis

    2018-04-01

    Full Text Available Semantic Web technologies are being increasingly adopted by the geospatial community during last decade through the utilization of open standards for expressing and serving geospatial data. This was also dramatically assisted by the ever-increasing access and usage of geographic mapping and location-based services via smart devices in people’s daily activities. In this paper, we explore the developmental framework of a pure JavaScript client-side GIS platform exclusively based on invocable geospatial Web services. We also extend JavaScript utilization on the server side by deploying a node server acting as a bridge between open source WPS libraries and popular geoprocessing engines. The vehicle for such an exploration is a cross platform Web browser capable of interpreting JavaScript commands to achieve interaction with geospatial providers. The tool is a generic Web interface providing capabilities of acquiring spatial datasets, composing layouts and applying geospatial processes. In an ideal form the end-user will have to identify those services, which satisfy a geo-related need and put them in the appropriate row. The final output may act as a potential collector of freely available geospatial web services. Its server-side components may exploit geospatial processing suppliers composing that way a light-weight fully transparent open Web GIS platform.

  20. 3D GIS spatial operation based on extended Euler operators

    Science.gov (United States)

    Xu, Hongbo; Lu, Guonian; Sheng, Yehua; Zhou, Liangchen; Guo, Fei; Shang, Zuoyan; Wang, Jing

    2008-10-01

    The implementation of 3 dimensions spatial operations, based on certain data structure, has a lack of universality and is not able to treat with non-manifold cases, at present. ISO/DIS 19107 standard just presents the definition of Boolean operators and set operators for topological relationship query, and OGC GeoXACML gives formal definitions for several set functions without implementation detail. Aiming at these problems, based mathematical foundation on cell complex theory, supported by non-manifold data structure and using relevant research in the field of non-manifold geometry modeling for reference, firstly, this paper according to non-manifold Euler-Poincaré formula constructs 6 extended Euler operators and inverse operators to carry out creating, updating and deleting 3D spatial elements, as well as several pairs of supplementary Euler operators to convenient for implementing advanced functions. Secondly, we change topological element operation sequence of Boolean operation and set operation as well as set functions defined in GeoXACML into combination of extended Euler operators, which separates the upper functions and lower data structure. Lastly, we develop underground 3D GIS prototype system, in which practicability and credibility of extended Euler operators faced to 3D GIS presented by this paper are validated.

  1. A GIS-based decision support system for regional eco-security assessment and its application on the Tibetan Plateau.

    Science.gov (United States)

    Xiaodan, Wang; Xianghao, Zhong; Pan, Gao

    2010-10-01

    Regional eco-security assessment is an intricate, challenging task. In previous studies, the integration of eco-environmental models and geographical information systems (GIS) usually takes two approaches: loose coupling and tight coupling. However, the present study used a full coupling approach to develop a GIS-based regional eco-security assessment decision support system (ESDSS). This was achieved by merging the pressure-state-response (PSR) model and the analytic hierarchy process (AHP) into ArcGIS 9 as a dynamic link library (DLL) using ArcObjects in ArcGIS and Visual Basic for Applications. Such an approach makes it easy to capitalize on the GIS visualization and spatial analysis functions, thereby significantly supporting the dynamic estimation of regional eco-security. A case study is presented for the Tibetan Plateau, known as the world's "third pole" after the Arctic and Antarctic. Results verified the usefulness and feasibility of the developed method. As a useful tool, the ESDSS can also help local managers to make scientifically-based and effective decisions about Tibetan eco-environmental protection and land use. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  2. [Location selection for Shenyang urban parks based on GIS and multi-objective location allocation model].

    Science.gov (United States)

    Zhou, Yuan; Shi, Tie-Mao; Hu, Yuan-Man; Gao, Chang; Liu, Miao; Song, Lin-Qi

    2011-12-01

    Based on geographic information system (GIS) technology and multi-objective location-allocation (LA) model, and in considering of four relatively independent objective factors (population density level, air pollution level, urban heat island effect level, and urban land use pattern), an optimized location selection for the urban parks within the Third Ring of Shenyang was conducted, and the selection results were compared with the spatial distribution of existing parks, aimed to evaluate the rationality of the spatial distribution of urban green spaces. In the location selection of urban green spaces in the study area, the factor air pollution was most important, and, compared with single objective factor, the weighted analysis results of multi-objective factors could provide optimized spatial location selection of new urban green spaces. The combination of GIS technology with LA model would be a new approach for the spatial optimizing of urban green spaces.

  3. Comparison of Artificial Neural Networks and GIS Based Solar Analysis for Solar Potential Estimation

    Science.gov (United States)

    Konakoǧlu, Berkant; Usta, Ziya; Cömert, Çetin; Gökalp, Ertan

    2016-04-01

    Nowadays, estimation of solar potential plays an important role in planning process for sustainable cities. The use of solar panels, which produces electricity directly from the sun, has become popular in accordance with developing technologies. Since the use of solar panels enables the users to decrease costs and increase yields, the use of solar panels will be more popular in the future. Production of electricity is not convenient for all circumstances. Shading effects, massive clouds and rainy weather are some factors that directly affect the production of electricity from solar energy. Hence, before the installation of solar panels, it is crucial to conduct spatial analysis and estimate the solar potential of the place that the solar panel will be installed. There are several approaches to determine the solar potential. Examination of the applications in the literature reveals that the applications conducted for determining the solar potential are divided into two main categories. Solar potential is estimated either by using artificial neural network approach in which statistical parameters such as the duration of sun shine, number of clear days, solar radiation etc. are used, or by spatial analysis conducted in GIS approaches in which spatial parameters such as, latitude, longitude, slope, aspect etc. are used. In the literature, there are several studies that use both approaches but the literature lacks of a study related to the comparison of these approaches. In this study, Karadeniz Technical University campus has been selected as study area. Monthly average values of the number of clear sky days, air temperature, atmospheric pressure, relative humidity, sunshine duration and solar radiation parameters obtained for the years between 2005 and 2015 will be used to perform artificial neural network analysis to estimate the solar potential of the study area. The solar potential will also be estimated by using GIS-based solar analysis modules. The results of

  4. Geospatial analysis based on GIS integrated with LADAR.

    Science.gov (United States)

    Fetterman, Matt R; Freking, Robert; Fernandez-Cull, Christy; Hinkle, Christopher W; Myne, Anu; Relyea, Steven; Winslow, Jim

    2013-10-07

    In this work, we describe multi-layered analyses of a high-resolution broad-area LADAR data set in support of expeditionary activities. High-level features are extracted from the LADAR data, such as the presence and location of buildings and cars, and then these features are used to populate a GIS (geographic information system) tool. We also apply line-of-sight (LOS) analysis to develop a path-planning module. Finally, visualization is addressed and enhanced with a gesture-based control system that allows the user to navigate through the enhanced data set in a virtual immersive experience. This work has operational applications including military, security, disaster relief, and task-based robotic path planning.

  5. Evaluating the Implementation and Effectiveness of GIS-Based Application in Secondary School Geography Lessons

    OpenAIRE

    Ali Ali

    2008-01-01

    The purpose of the study was to investigate the barriers preventing the use of Geographic Information Systems (GIS) in secondary school geography lessons and to determine its effectiveness on students success. A workshop focusing on ways to implement GIS-based application in the classroom for 14 teachers from nine high schools was conducted in 2006. The teachers were given GIS software, digital data for an application, and the necessary written documents describing the application. Due to var...

  6. A Web GIS Framework for Participatory Sensing Service: An Open Source-Based Implementation

    Directory of Open Access Journals (Sweden)

    Yu Nakayama

    2017-04-01

    Full Text Available Participatory sensing is the process in which individuals or communities collect and analyze systematic data using mobile phones and cloud services. To efficiently develop participatory sensing services, some server-side technologies have been proposed. Although they provide a good platform for participatory sensing, they are not optimized for spatial data management and processing. For the purpose of spatial data collection and management, many web GIS approaches have been studied. However, they still have not focused on the optimal framework for participatory sensing services. This paper presents a web GIS framework for participatory sensing service (FPSS. The proposed FPSS enables an integrated deployment of spatial data capture, storage, and data management functions. In various types of participatory sensing experiments, users can collect and manage spatial data in a unified manner. This feature is realized by the optimized system architecture and use case based on the general requirements for participatory sensing. We developed an open source GIS-based implementation of the proposed framework, which can overcome financial difficulties that are one of the major problems of deploying sensing experiments. We confirmed with the prototype that participatory sensing experiments can be performed efficiently with the proposed FPSS.

  7. Smart caching based on mobile agent of power WebGIS platform.

    Science.gov (United States)

    Wang, Xiaohui; Wu, Kehe; Chen, Fei

    2013-01-01

    Power information construction is developing towards intensive, platform, distributed direction with the expansion of power grid and improvement of information technology. In order to meet the trend, power WebGIS was designed and developed. In this paper, we first discuss the architecture and functionality of power WebGIS, and then we study caching technology in detail, which contains dynamic display cache model, caching structure based on mobile agent, and cache data model. We have designed experiments of different data capacity to contrast performance between WebGIS with the proposed caching model and traditional WebGIS. The experimental results showed that, with the same hardware environment, the response time of WebGIS with and without caching model increased as data capacity growing, while the larger the data was, the higher the performance of WebGIS with proposed caching model improved.

  8. GIS-based poverty and population distribution analysis in China

    Science.gov (United States)

    Cui, Jing; Wang, Yingjie; Yan, Hong

    2009-07-01

    Geographically, poverty status is not only related with social-economic factors but also strongly affected by geographical environment. In the paper, GIS-based poverty and population distribution analysis method is introduced for revealing their regional differences. More than 100000 poor villages and 592 national key poor counties are chosen for the analysis. The results show that poverty distribution tends to concentrate in most of west China and mountainous rural areas of mid China. Furthermore, the fifth census data are overlaid to those poor areas in order to gain its internal diversity of social-economic characteristics. By overlaying poverty related social-economic parameters, such as sex ratio, illiteracy, education level, percentage of ethnic minorities, family composition, finding shows that poverty distribution is strongly correlated with high illiteracy rate, high percentage minorities, and larger family member.

  9. Public participatory GIS in community-based disaster risk reduction

    Directory of Open Access Journals (Sweden)

    Randall B. Kemp

    2008-12-01

    Introducing PPGIS tools into community-based DRR is not a neutral effort. The information and communication technologies (ICT embedded in GIS can both aid the DRR efforts as well as impact the community in unintended ways. ICTs may be common in communities engaged in DRR efforts so the introduction of PPGIS may have minimal impact. What are the societal ramifications, however, of PPGIS methods in DRR efforts when ICTs are a relatively new aspect of a given community?  What are the communication methods pertinent to PPGIS in the DRR context?  How does the ICT literature address PPGIS methods?  The paper addresses these and other influences of ICT on societies prone to natural hazards.

  10. [Quality Suitability of Magnolia officinalis in China Based on GIS].

    Science.gov (United States)

    Shi, Lei; Zhang, Cheng-cheng; Ming, Meng-die; Guo, Lan-ping; Zhu, Shou-dong; Yang, Hong-bing

    2015-04-01

    To study the quality suitability rank dividing of Magnolia officinalis on the basis of investigation on the correlation between the ratio of magnolol and honokiol in Magnoliae Officinalis Cortex and ecological factors, in order to provide scientific basis for its planting area of high-quality medicinal materials. Based on the samples' quality analysis of 43 sampling points of Magnolia officinalis,the relationship between the ratio of magnolol and honokiol in Magnoliae officinalis Cortex and ecological factors was analyzed by statistical analysis. The geographic information system(GIS) was applied to assess the quality suitability rank dividing of Magnolia officinalis in China. There were 12 ecological factors mainly affecting the quality of Magnoliae Officinalis Cortex; The ratio of magnolol and honokiol had obvious characteristics of regional quality. Conclusion: Magnoliae Officinalis Cortex which produced in Hubei and Chongqing is dao-di herbs.

  11. Improved GIS-based Methods for Traffic Noise Impact Assessment

    DEFF Research Database (Denmark)

    Nielsen, Otto Anker; Bloch, Karsten Sand

    1996-01-01

    When vector-based GIS-packages are used for traffic noise impact assessments, the buffer-technique is usually employed for the study: 1. For each road segment buffer-zones representing different noise-intervals are generated, 2. The buffers from all road segments are smoothed together, and 3....... The number of buildings within the buffers are enumerated. This technique provides an inaccurate assessment of the noise diffusion since it does not correct for buildings barrier and reflection to noise. The paper presents the results from a research project where the traditional noise buffer technique...... was compared with a new method which includes these corrections. Both methods follow the Common Nordic Noise Calculation Model, although the traditional buffer technique ignores parts of the model. The basis for the work was a digital map of roads and building polygons, combined with a traffic- and road...

  12. GIS Based Application of Advanced Traveler Information System in India

    Science.gov (United States)

    Kumar, P.; Singh, V.

    2012-02-01

    Developed countries like USA, Canada, Japan, UK, Australia and Germany have adopted advanced traveler information technologies expeditiously in comparison to developing countries. But, unlike developed countries, developing countries face considerable financial and framework constraints. Moreover local traffic, roadway, signalization, demographic, topological and social conditions in developing countries are quite different from those in developed countries. In this paper, a comprehensive framework comprising of system architecture, development methodology and salient features of a developed Advanced Traveler Information System (ATIS) for metropolitan cities in developing countries has been discussed. Development of proposed system is based on integration of two well known information technologies viz. Geographic Information Systems (GIS) and World Wide Web (WWW). Combination of these technologies can be utilized to develop an integrated ATIS that targets different types of travelers like private vehicle owners, transit users and casual outside visitors.

  13. Effectively Using Groundwater Geochemistry Data: A GIS Approach

    International Nuclear Information System (INIS)

    Bollinger, J.S.

    1998-07-01

    The Savannah River Site (SRS) has accumulated a wealth of groundwater geochemistry data during the past two decades from a large network of monitoring wells. These data, archived in an Oracle database, have been accessible only in quarterly reports or a spreadsheet format. An ArcView extension has been developed to extract the data using a simple interface. The data are filtered, processed, and returned as an ArcView theme, permitting rapid analysis and evaluation of contaminated areas.Typically, these data must be analyzed by hydrostratigraphic unit to be useful. Unfortunately, a compendium of well screen-versus-aquifer relationships for groundwater monitoring wells at SRS has not been available, making the geochemical data difficult to use and analyze. Therefore, a 3-D hydrostratigraphic model has been developed in geographic information systems (GIS) and used in conjunction with well construction data to determine the location of well screen zones within the SRS vertical hydrostratigraphy. This information has been incorporated into the ArcView extension so that geochemical data can be analyzed and displayed in ArcView by hydrostratigraphic unit

  14. Modeling agricultural impacts of longwall mine subsidence: A GIS approach

    International Nuclear Information System (INIS)

    Darmody, R.G.; Vance, S.L.

    1994-01-01

    Illinois is both a major agricultural State and one of the leading coal-producing States. The future of coal mining in Illinois is longwall mining. One of the advantages of longwall mining, and the most noticeable consequence, is immediate subsidence. Mitigation of subsidence effects is the responsibility of the coal company. Research has shown that mitigation is usually effective, but may be difficult in many cases. Minimizing subsidence impact by avoiding sensitive soils in the mine plan is a possibility that should be considered. Predicting agricultural impacts of subsidence would give mine designers and regulating agencies an additional tool to use when evaluating mine plans. This paper reports on the development and an application of a predictive model of agricultural soil subsidence sensitivity (SSS). The SSS model involves integration of selected soil properties in a GIS (geographical information system) to assign a subsidence sensitivity class to a given area. Predicted crop yield losses at a proposed longwall mine in southern Illinois, using corn (Zea mays L.) as a reference, were 6.8% for the longwall panel area but ranged from 4.1% to 9.5% for the individual panels. The model also predicted that mitigation of the affected areas would reduce yield losses to 1.2% for the longwall area and to 0.5% to 1.7% for the individual panels

  15. GIS-based Integration of Interdisciplinary Ecological Data to Detect ...

    African Journals Online (AJOL)

    Key words: mangrove, satellite imagery, environment, aerial photography, GIS, Kenya Historic environmental, faunal, floral and socioeconomic data of Gazi Bay in coastal Kenya were collated and integrated into a GIS environment and data of impacts due to various factors were then related to remotely sensed data.

  16. A GIS-based method for household recruitment in a prospective pesticide exposure study

    Directory of Open Access Journals (Sweden)

    Phillips Michael J

    2008-04-01

    Full Text Available Abstract Background Recent advances in GIS technology and remote sensing have provided new opportunities to collect ecologic data on agricultural pesticide exposure. Many pesticide studies have used historical or records-based data on crops and their associated pesticide applications to estimate exposure by measuring residential proximity to agricultural fields. Very few of these studies collected environmental and biological samples from study participants. One of the reasons for this is the cost of identifying participants who reside near study fields and analyzing samples obtained from them. In this paper, we present a cost-effective, GIS-based method for crop field selection and household recruitment in a prospective pesticide exposure study in a remote location. For the most part, our multi-phased approach was carried out in a research facility, but involved two brief episodes of fieldwork for ground truthing purposes. This method was developed for a larger study designed to examine the validity of indirect pesticide exposure estimates by comparing measured exposures in household dust, water and urine with records-based estimates that use crop location, residential proximity and pesticide application data. The study focused on the pesticide atrazine, a broadleaf herbicide used in corn production and one of the most widely-used pesticides in the U.S. Results We successfully used a combination of remotely-sensed data, GIS-based methods and fieldwork to select study fields and recruit participants in Illinois, a state with high corn production and heavy atrazine use. Our several-step process consisted of the identification of potential study fields and residential areas using aerial photography; verification of crop patterns and land use via site visits; development of a GIS-based algorithm to define recruitment areas around crop fields; acquisition of geocoded household-level data within each recruitment area from a commercial vendor; and

  17. GIS-Based Education Course for Bachelor of Management Program in the Lomonosov Moscow State University Business School

    Science.gov (United States)

    Pirogov, A.

    2014-04-01

    An optional course, "Geographical Aspects of Business" in the framework of the Bachelor of management program in the Lomonosov Moscow State University Business School is setting the goal to introduce future discipline specialists with geographical topics of current interest for management and provide knowledge, skills and expertise of geospatial analysis and the use of geoinformation technologies in finding solutions to economic and managerial tasks. The students' feedback shows interest and demand for such a course for management students. The course has an interdisciplinary links with the main subjects such as marketing, public administration, visual communication, etc., and is based on the set of business cases dealing with Web-GIS Services, LBS, Geomarketing, Spatial analysis, etc. Open Data and corporate geodata sets are used. The pragmatist approach is selected for successful accomplishment of the course's goal, which is based on using Web-GIS tools. The Geomixer - a free web- GIS product by the company SCANEX - is chosen to be one of them. The principle "I do - I analyze" helps to minimize the theoretic constituent of the course improving the outcome of the classes. Owing to innovative methods of teaching, the educational goal of the course is achieved to the full scope despite the small number of allocated hours. The classes surely improve both the general level of geographic competence of students and provide them with the skills to work with GIS. Such optional courses will undoubtedly contribute to the development of GIS-education in management administration.

  18. Development of geophysical and geochemical data processing software based on component GIS

    International Nuclear Information System (INIS)

    Ke Dan; Yu Xiang; Wu Qubo; Han Shaoyang; Li Xi

    2013-01-01

    Based on component GIS and mixed programming techniques, a software which combines the basic GIS functions, conventional and unconventional data process methods for the regional geophysical and geochemical data together, is designed and developed. The software has many advantages, such as friendly interface, easy to use and utility functions and provides a useful platform for regional geophysical and geochemical data processing. (authors)

  19. CLOUD BASED WEB 3D GIS TAIWAN PLATFORM

    Directory of Open Access Journals (Sweden)

    W.-F. Tsai

    2012-09-01

    Full Text Available This article presents the status of the web 3D GIS platform, which has been developed in the National Applied Research Laboratories. The purpose is to develop a global earth observation 3D GIS platform for applications to disaster monitoring and assessment in Taiwan. For quick response to preliminary and detailed assessment after a natural disaster occurs, the web 3D GIS platform is useful to access, transfer, integrate, display and analyze the multi-scale huge data following the international OGC standard. The framework of cloud service for data warehousing management and efficiency enhancement using VMWare is illustrated in this article.

  20. GIS-based interactive tool to map the advent of world conquerors

    Science.gov (United States)

    Lakkaraju, Mahesh

    The objective of this thesis is to show the scale and extent of some of the greatest empires the world has ever seen. This is a hybrid project between the GIS based interactive tool and the web-based JavaScript tool. This approach lets the students learn effectively about the emperors themselves while understanding how long and far their empires spread. In the GIS based tool, a map is displayed with various points on it, and when a user clicks on one point, the relevant information of what happened at that particular place is displayed. Apart from this information, users can also select the interactive animation button and can walk through a set of battles in chronological order. As mentioned, this uses Java as the main programming language, and MOJO (Map Objects Java Objects) provided by ESRI. MOJO is very effective as its GIS related features can be included in the application itself. This app. is a simple tool and has been developed for university or high school level students. D3.js is an interactive animation and visualization platform built on the Javascript framework. Though HTML5, CSS3, Javascript and SVG animations can be used to derive custom animations, this tool can help bring out results with less effort and more ease of use. Hence, it has become the most sought after visualization tool for multiple applications. D3.js has provided a map-based visualization feature so that we can easily display text-based data in a map-based interface. To draw the map and the points on it, D3.js uses data rendered in TOPO JSON format. The latitudes and longitudes can be provided, which are interpolated into the Map svg. One of the main advantages of doing it this way is that more information is retained when we use a visual medium.

  1. GIS Based Distributed Runoff Predictions in Variable Source Area Watersheds Employing the SCS-Curve Number

    Science.gov (United States)

    Steenhuis, T. S.; Mendoza, G.; Lyon, S. W.; Gerard Marchant, P.; Walter, M. T.; Schneiderman, E.

    2003-04-01

    Because the traditional Soil Conservation Service Curve Number (SCS-CN) approach continues to be ubiquitously used in GIS-BASED water quality models, new application methods are needed that are consistent with variable source area (VSA) hydrological processes in the landscape. We developed within an integrated GIS modeling environment a distributed approach for applying the traditional SCS-CN equation to watersheds where VSA hydrology is a dominant process. Spatial representation of hydrologic processes is important for watershed planning because restricting potentially polluting activities from runoff source areas is fundamental to controlling non-point source pollution. The methodology presented here uses the traditional SCS-CN method to predict runoff volume and spatial extent of saturated areas and uses a topographic index to distribute runoff source areas through watersheds. The resulting distributed CN-VSA method was incorporated in an existing GWLF water quality model and applied to sub-watersheds of the Delaware basin in the Catskill Mountains region of New York State. We found that the distributed CN-VSA approach provided a physically-based method that gives realistic results for watersheds with VSA hydrology.

  2. Development of a web based GIS for health facilities mapping ...

    African Journals Online (AJOL)

    Hilary Mushonga

    Key Words: Spatial Decision Support System, Web GIS, Mapping, Health geography. 1. Introduction ... Health geography is an area of medical research that incorporates geographic techniques into the study of ... street water pump. Once the ...

  3. Automatic generation of water distribution systems based on GIS data.

    Science.gov (United States)

    Sitzenfrei, Robert; Möderl, Michael; Rauch, Wolfgang

    2013-09-01

    In the field of water distribution system (WDS) analysis, case study research is needed for testing or benchmarking optimisation strategies and newly developed software. However, data availability for the investigation of real cases is limited due to time and cost needed for data collection and model setup. We present a new algorithm that addresses this problem by generating WDSs from GIS using population density, housing density and elevation as input data. We show that the resulting WDSs are comparable to actual systems in terms of network properties and hydraulic performance. For example, comparing the pressure heads for an actual and a generated WDS results in pressure head differences of ±4 m or less for 75% of the supply area. Although elements like valves and pumps are not included, the new methodology can provide water distribution systems of varying levels of complexity (e.g., network layouts, connectivity, etc.) to allow testing design/optimisation algorithms on a large number of networks. The new approach can be used to estimate the construction costs of planned WDSs aimed at addressing population growth or at comparisons of different expansion strategies in growth corridors.

  4. “GEOHeritage” - GIS Based Application for Movable Heritage

    Directory of Open Access Journals (Sweden)

    Albina Moscicka

    2011-12-01

    Full Text Available The paper will present the results of a research project „A methodology for mapping movable heritage”.  This project, financed by the Polish Ministry of Science and Higher Education in 2008-2010, was realized by the Institute of Geodesy and Cartography in cooperation with the Research and Academic Computer Network (portal Polska.pl, the Central Archives of Historical Records and Department of Art History of the Wroclaw University. The idea of the project was to simplify access to digital movable cultural heritage by the use of spatial information. The main aspect of the project was to use a Geographic Information System (GIS - as a technology and as a tool - to integrate different digital collections, present their content in one space and provide online access to them from one common level – from an online map. The essence of the research was to present on the online map movable monument as multi-spatial object. The base of this assumption is that most of monuments, especially movable ones, can have several places in the geographical space that are connected with them (several various space relations. As a rule archival documents were created in one place, describe the other, today can be kept in places far away from the place they were prepared, and what more the parts of the same collection can be kept in different archives. Moreover, one single document can be connected or have relations (typological, thematically, temporal, spatial with other relations to the same or the other one. The reason for it is that documents concerning various places are housed in the same archive, various documents can present the same place or the place of creating particular document can be the place of housing another. In the project the basic source material was digital collections of original records. Their metadata defined in the international standards of monuments’ description were used for connecting digital monuments with the geographic space

  5. Gis-based procedures for hydropower potential spotting

    Energy Technology Data Exchange (ETDEWEB)

    Larentis, Dante G.; Collischonn, Walter; Tucci, Carlos E.M. [Instituto de Pesquisas Hidraulicas da UFRGS, Av. Bento Goncalves, 9500, CEP 91501-970, Caixa Postal 15029, Porto Alegre, RS (Brazil); Olivera, Francisco (Texas A and M University, Zachry Department of Civil Engineering 3136 TAMU, College Station, TX 77843-3136, US)

    2010-10-15

    The increasing demand for energy, especially from renewable and sustainable sources, spurs the development of small hydropower plants and encourages investment in new survey studies. Preliminary hydropower survey studies usually carry huge uncertainties about the technical, economic and environmental feasibility of the undeveloped potential. This paper presents a methodology for large-scale survey of hydropower potential sites to be applied in the inception phase of hydroelectric development planning. The sequence of procedures to identify hydropower sites is based on remote sensing and regional streamflow data and was automated within a GIS-based computational program: Hydrospot. The program allows spotting more potential sites along the drainage network than it would be possible in a traditional survey study, providing different types of dam-powerhouse layouts and two types (operating modes) of projects: run-of-the-river and storage projects. Preliminary results from its applications in a hydropower-developed basin in Brazil have shown Hydrospot's limitations and potentialities in giving support to the mid-to-long-term planning of the electricity sector. (author)

  6. Development and challenges of using web-based GIS for health applications

    DEFF Research Database (Denmark)

    Gao, Sheng; Mioc, Darka; Boley, Harold

    2011-01-01

    Web-based GIS is increasingly used in health applications. It has the potential to provide critical information in a timely manner, support health care policy development, and educate decision makers and the general public. This paper describes the trends and recent development of health...... applications using a Web-based GIS. Recent progress on the database storage and geospatial Web Services has advanced the use of Web-based GIS for health applications, with various proprietary software, open source software, and Application Programming Interfaces (APIs) available. Current challenges in applying...... care planning, and public health participation....

  7. GIS-based hydrogeological databases and groundwater modelling

    Science.gov (United States)

    Gogu, Radu Constantin; Carabin, Guy; Hallet, Vincent; Peters, Valerie; Dassargues, Alain

    2001-12-01

    Reliability and validity of groundwater analysis strongly depend on the availability of large volumes of high-quality data. Putting all data into a coherent and logical structure supported by a computing environment helps ensure validity and availability and provides a powerful tool for hydrogeological studies. A hydrogeological geographic information system (GIS) database that offers facilities for groundwater-vulnerability analysis and hydrogeological modelling has been designed in Belgium for the Walloon region. Data from five river basins, chosen for their contrasting hydrogeological characteristics, have been included in the database, and a set of applications that have been developed now allow further advances. Interest is growing in the potential for integrating GIS technology and groundwater simulation models. A "loose-coupling" tool was created between the spatial-database scheme and the groundwater numerical model interface GMS (Groundwater Modelling System). Following time and spatial queries, the hydrogeological data stored in the database can be easily used within different groundwater numerical models. Résumé. La validité et la reproductibilité de l'analyse d'un aquifère dépend étroitement de la disponibilité de grandes quantités de données de très bonne qualité. Le fait de mettre toutes les données dans une structure cohérente et logique soutenue par les logiciels nécessaires aide à assurer la validité et la disponibilité et fournit un outil puissant pour les études hydrogéologiques. Une base de données pour un système d'information géographique (SIG) hydrogéologique qui offre toutes les facilités pour l'analyse de la vulnérabilité des eaux souterraines et la modélisation hydrogéologique a été établi en Belgique pour la région Wallonne. Les données de cinq bassins de rivières, choisis pour leurs caractéristiques hydrogéologiques différentes, ont été introduites dans la base de données, et un ensemble d

  8. Use of GIS-Based Sampling to Inform Food Security Assessments and Decision Making in Kenya

    Science.gov (United States)

    Wahome, A.; Ndubi, A. O.; Ndungu, L. W.; Mugo, R. M.; Flores Cordova, A. I.

    2017-12-01

    Kenya relies on agricultural production for supporting local consumption and other processing value chains. With changing climate in a rain-fed dependent agricultural production system, cropping zones are shifting and proper decision making will require updated data. Where up-to-date data is not available it is important that it is generated and passed over to relevant stakeholders to inform their decision making. The process of generating this data should be cost effective and less time consuming. The Kenyan State Department of Agriculture (SDA) runs an insurance programme for maize farmers in a number of counties in Kenya. Previously, SDA was using a list of farmers to identify the crop fields for this insurance programme. However, the process of listing of all farmers in each Unit Area of Insurance (UAI) proved to be tedious and very costly, hence need for an alternative approach, but acceptable sampling methodology. Building on the existing cropland maps, SERVIR, a joint NASA-USAID initiative that brings Earth observations (EO) for improved environmental decision making in developing countries, specifically its hub in Eastern and Soutehrn Africa developed a High Resolution Map based on 10m Sentinel satellite images from which a GIS based sampling frame for identifying maize fields was developed. Sampling points were randomly generated in each UAI and navigated to using hand-held GPS units for identification of maize farmers. In the GIS-based identification of farmers SDA uses 1 day to cover an area covered in 1 week by list identification of farmers. Similarly, SDA spends approximately 3,000 USD per sub-county to locate maize fields using GIS-based sampling as compared 10,000 USD they used to spend before. This has resulted in 70% cost reduction.

  9. New GIS approaches to wild land mapping in Europe

    Science.gov (United States)

    Steffen Fritz; Steve Carver; Linda See

    2000-01-01

    This paper outlines modifications and new approaches to wild land mapping developed specifically for the United Kingdom and European areas. In particular, national level reconnaissance and local level mapping of wild land in the UK and Scotland are presented. A national level study for the UK is undertaken, and a local study focuses on the Cairngorm Mountains in...

  10. Integrated environmental decision support tool based on GIS technology

    International Nuclear Information System (INIS)

    Doctor, P.G.; O'Neil, T.K.; Sackschewsky, M.R.; Becker, J.M.; Rykiel, E.J.; Walters, T.B.; Brandt, C.A.; Hall, J.A.

    1995-01-01

    Environmental restoration and management decisions facing the US Department of Energy require balancing trade-offs between diverse land uses and impacts over multiple spatial and temporal scales. Many types of environmental data have been collected for the Hanford Site and the Columbia River in Washington State over the past fifty years. Pacific Northwest National Laboratory (PNNL) is integrating these data into a Geographic Information System (GIS) based computer decision support tool. This tool provides a comprehensive and concise description of the current environmental landscape that can be used to evaluate the ecological and monetary trade-offs between future land use, restoration and remediation options before action is taken. Ecological impacts evaluated include effects to individual species of concern and habitat loss and fragmentation. Monetary impacts include those associated with habitat mitigation. The tool is organized as both a browsing tool for educational purposes, and as a framework that leads a project manager through the steps needed to be in compliance with environmental requirements

  11. Cell Based GIS as Cellular Automata for Disaster Spreading Predictions and Required Data Systems

    Directory of Open Access Journals (Sweden)

    Kohei Arai

    2013-03-01

    Full Text Available A method for prediction and simulation based on the Cell Based Geographic Information System(GIS as Cellular Automata (CA is proposed together with required data systems, in particular metasearch engine usage in an unified way. It is confirmed that the proposed cell based GIS as CA has flexible usage of the attribute information that is attached to the cell in concert with location information and does work for disaster spreading simulation and prediction.

  12. Depth data research of GIS based on clustering analysis algorithm

    Science.gov (United States)

    Xiong, Yan; Xu, Wenli

    2018-03-01

    The data of GIS have spatial distribution. Geographic data has both spatial characteristics and attribute characteristics, and also changes with time. Therefore, the amount of data is very large. Nowadays, many industries and departments in the society are using GIS. However, without proper data analysis and mining scheme, GIS will not exert its maximum effectiveness and will waste a lot of data. In this paper, we use the geographic information demand of a national security department as the experimental object, combining the characteristics of GIS data, taking into account the characteristics of time, space, attributes and so on, and using cluster analysis algorithm. We further study the mining scheme for depth data, and get the algorithm model. This algorithm can automatically classify sample data, and then carry out exploratory analysis. The research shows that the algorithm model and the information mining scheme can quickly find hidden depth information from the surface data of GIS, thus improving the efficiency of the security department. This algorithm can also be extended to other fields.

  13. Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach

    Science.gov (United States)

    Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

    2017-01-01

    Background Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. Objective The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. Methods This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach’s alpha of 75%. Data was analyzed using the decision Delphi technique. Results GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Conclusion Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information. PMID:28848627

  14. Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach.

    Science.gov (United States)

    Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

    2017-06-01

    Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach's alpha of 75%. Data was analyzed using the decision Delphi technique. GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information.

  15. Georeferenced Population Datasets of Mexico (GEO-MEX): Raster Based GIS Coverage of Mexican Population

    Data.gov (United States)

    National Aeronautics and Space Administration — The Raster Based GIS Coverage of Mexican Population is a gridded coverage (1 x 1 km) of Mexican population. The data were converted from vector into raster. The...

  16. An open source GIS-based tool to integrate the fragmentation mechanism in rockfall propagation

    Science.gov (United States)

    Matas, Gerard; Lantada, Nieves; Gili, Josep A.; Corominas, Jordi

    2015-04-01

    Rockfalls are frequent instability processes in road cuts, open pit mines and quarries, steep slopes and cliffs. Even though the stability of rock slopes can be determined using analytical approaches, the assessment of large rock cliffs require simplifying assumptions due to the difficulty of working with a large amount of joints, the scattering of both the orientations and strength parameters. The attitude and persistency of joints within the rock mass define the size of kinematically unstable rock volumes. Furthermore the rock block will eventually split in several fragments during its propagation downhill due its impact with the ground surface. Knowledge of the size, energy, trajectory… of each block resulting from fragmentation is critical in determining the vulnerability of buildings and protection structures. The objective of this contribution is to present a simple and open source tool to simulate the fragmentation mechanism in rockfall propagation models and in the calculation of impact energies. This tool includes common modes of motion for falling boulders based on the previous literature. The final tool is being implemented in a GIS (Geographic Information Systems) using open source Python programming. The tool under development will be simple, modular, compatible with any GIS environment, open source, able to model rockfalls phenomena correctly. It could be used in any area susceptible to rockfalls with a previous adjustment of the parameters. After the adjustment of the model parameters to a given area, a simulation could be performed to obtain maps of kinetic energy, frequency, stopping density and passing heights. This GIS-based tool and the analysis of the fragmentation laws using data collected from recent rockfall have being developed within the RockRisk Project (2014-2016). This project is funded by the Spanish Ministerio de Economía y Competitividad and entitled "Rockfalls in cliffs: risk quantification and its prevention"(BIA2013-42582-P).

  17. Tsunami Hazard Preventing Based Land Use Planning Model Using GIS Techniques in Muang Krabi, Thailand

    Directory of Open Access Journals (Sweden)

    Abdul Salam Soomro

    2012-10-01

    Full Text Available The terrible tsunami disaster, on 26 December 2004 hit Krabi, one of the ecotourist and very fascinating provinces of southern Thailand including its various regions e.g. Phangna and Phuket by devastating the human lives, coastal communications and the financially viable activities. This research study has been aimed to generate the tsunami hazard preventing based lands use planning model using GIS (Geographical Information Systems based on the hazard suitability analysis approach. The different triggering factors e.g. elevation, proximity to shore line, population density, mangrove, forest, stream and road have been used based on the land use zoning criteria. Those criteria have been used by using Saaty scale of importance one, of the mathematical techniques. This model has been classified according to the land suitability classification. The various techniques of GIS, namely subsetting, spatial analysis, map difference and data conversion have been used. The model has been generated with five categories such as high, moderate, low, very low and not suitable regions illustrating with their appropriate definition for the decision makers to redevelop the region.

  18. Tsunami hazard preventing based land use planing model using GIS technique in Muang Krabi, Thailand

    International Nuclear Information System (INIS)

    Soormo, A.S.

    2012-01-01

    The terrible tsunami disaster, on 26 December 2004 hit Krabi, one of the ecotourist and very fascinating provinces of southern Thailand including its various regions e.g. Phangna and Phuket by devastating the human lives, coastal communications and the financially viable activities. This research study has been aimed to generate the tsunami hazard preventing based lands use planning model using GIS (Geographical Information Systems) based on the hazard suitability analysis approach. The different triggering factors e.g. elevation, proximity to shore line, population density, mangrove, forest, stream and road have been used based on the land use zoning criteria. Those criteria have been used by using Saaty scale of importance one, of the mathematical techniques. This model has been classified according to the land suitability classification. The various techniques of GIS, namely subsetting, spatial analysis, map difference and data conversion have been used. The model has been generated with five categories such as high, moderate, low, very low and not suitable regions illustrating with their appropriate definition for the decision makers to redevelop the region. (author)

  19. Integrated GIS-Based Site Selection of Hillside Development for Future Growth of Urban Areas

    Directory of Open Access Journals (Sweden)

    Imtiaz Ahmed Chandio

    2016-04-01

    Full Text Available Urbanization is a challenging issue for developing countries, like Malaysia. Penang Island is one of the states of Malaysia selected as a study area where limited flat land exists. As a result, this would create urban environmental problems, such as unstable slopes and landslides due to uneven topography. The purpose of this study was to develop land suitability model for hillside development. Hence, this research aims land suitability analysis modelling for hillside development by using integrated GIS (Geographic Information System based MCDM (Multi-Criteria Decision Making approach. The hill land portion of Penang Island was selected for hillside site development using GIS and AHP (Analytic Hierarchy Process as a MCDM method for sustainable hillside development. This study found that 15% of land was highly suitable, 27% moderately suitable, 41% less suitable, and 17% not suitable. Therefore, this research can be consistently used by the concerned authorities for sustainable hillside urban planning and development. This approach can be used as a policy tool in decision making of urban planning and development.

  20. GIS-based integrated groundwater potential assessment of Osun ...

    African Journals Online (AJOL)

    Topographic parameters including surface curvatures, slope and elevation were derived from SPOT DEM and used to generate landform and relief maps for the study area. Spatial Analysis Module of ArcGIS 10.3 software was used to generate lineament proximity, hydrolineament density and drainage density maps for the ...

  1. Development of a web based GIS for health facilities mapping ...

    African Journals Online (AJOL)

    Around the world health professionals and authorities, in many cases, do not have the ability to visualize health related spatial information to make timely decisions. The high cost of deploying a desktop Geographical Information System (GIS) for Public Health management coupled with the need for specialised training in ...

  2. GIS and RS-based modelling of potential natural hazard areas in Pehchevo municipality, Republic of Macedonia

    Directory of Open Access Journals (Sweden)

    Milevski Ivica

    2013-01-01

    Full Text Available In this paper, one approach of Geographic Information System (GIS and Remote Sensing (RS assessment of potential natural hazard areas (excess erosion, landslides, flash floods and fires is presented. For that purpose Pehchevo Municipality in the easternmost part of the Republic of Macedonia is selected as a case study area because of high local impact of natural hazards on the environment, social-demographic situation and local economy. First of all, most relevant static factors for each type of natural hazard are selected (topography, land cover, anthropogenic objects and infrastructure. With GIS and satellite imagery, multi-layer calculation is performed based on available traditional equations, clustering or discreditation procedures. In such way suitable relatively “static” natural hazard maps (models are produced. Then, dynamic (mostly climate related factors are included in previous models resulting in appropriate scenarios correlated with different amounts of precipitation, temperature, wind direction etc. Finally, GIS based scenarios are evaluated and tested with field check or very fine resolution Google Earth imagery showing good accuracy. Further development of such GIS models in connection with automatic remote meteorological stations and dynamic satellite imagery (like MODIS will provide on-time warning for coming natural hazard avoiding potential damages or even causalities.

  3. Gis-Based Smart Cartography Using 3d Modeling

    Science.gov (United States)

    Malinverni, E. S.; Tassetti, A. N.

    2013-08-01

    3D City Models have evolved to be important tools for urban decision processes and information systems, especially in planning, simulation, analysis, documentation and heritage management. On the other hand existing and in use numerical cartography is often not suitable to be used in GIS because not geometrically and topologically correctly structured. The research aim is to 3D structure and organize a numeric cartography for GIS and turn it into CityGML standardized features. The work is framed around a first phase of methodological analysis aimed to underline which existing standard (like ISO and OGC rules) can be used to improve the quality requirement of a cartographic structure. Subsequently, from this technical specifics, it has been investigated the translation in formal contents, using an owner interchange software (SketchUp), to support some guide lines implementations to generate a GIS3D structured in GML3. It has been therefore predisposed a test three-dimensional numerical cartography (scale 1:500, generated from range data captured by 3D laser scanner), tested on its quality according to the previous standard and edited when and where necessary. Cad files and shapefiles are converted into a final 3D model (Google SketchUp model) and then exported into a 3D city model (CityGML LoD1/LoD2). The GIS3D structure has been managed in a GIS environment to run further spatial analysis and energy performance estimate, not achievable in a 2D environment. In particular geometrical building parameters (footprint, volume etc.) are computed and building envelop thermal characteristics are derived from. Lastly, a simulation is carried out to deal with asbestos and home renovating charges and show how the built 3D city model can support municipal managers with risk diagnosis of the present situation and development of strategies for a sustainable redevelop.

  4. A GIS-based disaggregate spatial watershed analysis using RADAR data

    International Nuclear Information System (INIS)

    Al-Hamdan, M.

    2002-01-01

    Hydrology is the study of water in all its forms, origins, and destinations on the earth.This paper develops a novel modeling technique using a geographic information system (GIS) to facilitate watershed hydrological routing using RADAR data. The RADAR rainfall data, segmented to 4 km by 4 km blocks, divides the watershed into several sub basins which are modeled independently. A case study for the GIS-based disaggregate spatial watershed analysis using RADAR data is provided for South Fork Cowikee Creek near Batesville, Alabama. All the data necessary to complete the analysis is maintained in the ArcView GIS software. This paper concludes that the GIS-Based disaggregate spatial watershed analysis using RADAR data is a viable method to calculate hydrological routing for large watersheds. (author)

  5. WebGIS based on semantic grid model and web services

    Science.gov (United States)

    Zhang, WangFei; Yue, CaiRong; Gao, JianGuo

    2009-10-01

    As the combination point of the network technology and GIS technology, WebGIS has got the fast development in recent years. With the restriction of Web and the characteristics of GIS, traditional WebGIS has some prominent problems existing in development. For example, it can't accomplish the interoperability of heterogeneous spatial databases; it can't accomplish the data access of cross-platform. With the appearance of Web Service and Grid technology, there appeared great change in field of WebGIS. Web Service provided an interface which can give information of different site the ability of data sharing and inter communication. The goal of Grid technology was to make the internet to a large and super computer, with this computer we can efficiently implement the overall sharing of computing resources, storage resource, data resource, information resource, knowledge resources and experts resources. But to WebGIS, we only implement the physically connection of data and information and these is far from the enough. Because of the different understanding of the world, following different professional regulations, different policies and different habits, the experts in different field will get different end when they observed the same geographic phenomenon and the semantic heterogeneity produced. Since these there are large differences to the same concept in different field. If we use the WebGIS without considering of the semantic heterogeneity, we will answer the questions users proposed wrongly or we can't answer the questions users proposed. To solve this problem, this paper put forward and experienced an effective method of combing semantic grid and Web Services technology to develop WebGIS. In this paper, we studied the method to construct ontology and the method to combine Grid technology and Web Services and with the detailed analysis of computing characteristics and application model in the distribution of data, we designed the WebGIS query system driven by

  6. Rainfall-runoff modeling of the Chapel Branch Creek Watershed using GIS-based rational and SCS-CN methods

    Science.gov (United States)

    Elizabeth N. Mihalik; Norm S. Levine; Devendra M. Amatya

    2008-01-01

    Chapel Branch Creek (CBC), located within the Town of Santee adjacent to Lake Marion in Orangeburg County, SC, is listed on the SC 2004 303(d) list of impaired waterbodies due to elevated levels of nitrogen (N), phosphorus (P), chlorophyll-a, and pH. In this study, using a GIS-based approach, two runoff modeling methods, the Rational and SCS-CN methods, have been...

  7. GIS-based Watershed Management Modeling for Surface Runoff Calculation in Tatara River Basin, Japan

    OpenAIRE

    Ix, Hour; Mori, Makito; Hiramatsu, Kazuaki; Harada, Masayoshi

    2007-01-01

    In the past few decades when Geographical Information System (GIS) technology was not fully developed in practical use, watershed delineation work used to be conducted manually by hydrologists based on topographic maps. The work was a tedious operation, since it had to be done repeatedly in similar manner for each basin or sub-basin of interest, and its process always left some unpredicted errors. Nowadays, GIS software is being upgraded regularly with powerful tools responding to the needs o...

  8. Analysis Of Educational Services Distribution-Based Geographic Information System GIS

    OpenAIRE

    Waleed Lagrab; Noura AKNIN

    2015-01-01

    Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facil...

  9. Comparison of regression coefficient and GIS-based methodologies for regional estimates of forest soil carbon stocks

    International Nuclear Information System (INIS)

    Elliott Campbell, J.; Moen, Jeremie C.; Ney, Richard A.; Schnoor, Jerald L.

    2008-01-01

    Estimates of forest soil organic carbon (SOC) have applications in carbon science, soil quality studies, carbon sequestration technologies, and carbon trading. Forest SOC has been modeled using a regression coefficient methodology that applies mean SOC densities (mass/area) to broad forest regions. A higher resolution model is based on an approach that employs a geographic information system (GIS) with soil databases and satellite-derived landcover images. Despite this advancement, the regression approach remains the basis of current state and federal level greenhouse gas inventories. Both approaches are analyzed in detail for Wisconsin forest soils from 1983 to 2001, applying rigorous error-fixing algorithms to soil databases. Resulting SOC stock estimates are 20% larger when determined using the GIS method rather than the regression approach. Average annual rates of increase in SOC stocks are 3.6 and 1.0 million metric tons of carbon per year for the GIS and regression approaches respectively. - Large differences in estimates of soil organic carbon stocks and annual changes in stocks for Wisconsin forestlands indicate a need for validation from forthcoming forest surveys

  10. Study on the complex network characteristics of urban road system based on GIS

    Science.gov (United States)

    Gao, Zhonghua; Chen, Zhenjie; Liu, Yongxue; Huang, Kang

    2007-06-01

    Urban road system is the basic bone of urban transportation and one of the most important factors that influent and controls the urban configuration. In this paper, an approach of modeling, analyzing and optimizing urban road system is described based on complex network theory and GIS technology. The urban road system is studied on three focuses: building the urban road network, modeling the computational procedures based on urban road networks and analyzing the urban road system of Changzhou City as the study case. The conclusion is that the urban road network is a scale-free network with small-world characteristic, and there is still space for development of the whole network as a small-world network, also the key road crosses should be kept expedite.

  11. The research and implementation of coalfield spontaneous combustion of carbon emission WebGIS based on Silverlight and ArcGIS server

    International Nuclear Information System (INIS)

    Zhu, Z; Bi, J; Wang, X; Zhu, W

    2014-01-01

    As an important sub-topic of the natural process of carbon emission data public information platform construction, coalfield spontaneous combustion of carbon emission WebGIS system has become an important study object. In connection with data features of coalfield spontaneous combustion carbon emissions (i.e. a wide range of data, which is rich and complex) and the geospatial characteristics, data is divided into attribute data and spatial data. Based on full analysis of the data, completed the detailed design of the Oracle database and stored on the Oracle database. Through Silverlight rich client technology and the expansion of WCF services, achieved the attribute data of web dynamic query, retrieval, statistical, analysis and other functions. For spatial data, we take advantage of ArcGIS Server and Silverlight-based API to invoke GIS server background published map services, GP services, Image services and other services, implemented coalfield spontaneous combustion of remote sensing image data and web map data display, data analysis, thematic map production. The study found that the Silverlight technology, based on rich client and object-oriented framework for WCF service, can efficiently constructed a WebGIS system. And then, combined with ArcGIS Silverlight API to achieve interactive query attribute data and spatial data of coalfield spontaneous emmission, can greatly improve the performance of WebGIS system. At the same time, it provided a strong guarantee for the construction of public information on China's carbon emission data

  12. Enabling Participatory Decision Making Through Web-Based GIS

    International Nuclear Information System (INIS)

    Sheng, Grant; Yam, Kevin; Hassas, Aranak

    2001-01-01

    obligations to fellow human beings, animals, and the environment. People perceive that information travels essentially one way in the processes and the voices of the community and its members are not heard. Subsequently, they feel excluded from the actual decision making process and even from being able to participate meaningfully in the process. Recent advances in informatics and geomatics technology, such as the Internet, web-based software and geographic information systems (GIS), have made it possible to address these issues more effectively. We believe that the combined features of two software developed at the York Centre for Applied Sustainability can facilitate access to information, provide a virtual forum for discussion and debate, and it possible for individuals to participate in decision making process, and to infer peoples' values from their choice criteria selection

  13. Accessibility patterns and community integration among previously homeless adults: a Geographic Information Systems (GIS) approach.

    Science.gov (United States)

    Chan, Dara V; Gopal, Sucharita; Helfrich, Christine A

    2014-11-01

    Although a desired rehabilitation goal, research continues to document that community integration significantly lags behind housing stability success rates for people of a variety of ages who used to be homeless. While accessibility to resources is an environmental factor that may promote or impede integration activity, there has been little empirical investigation into the impact of proximity of community features on resource use and integration. Using a Geographic Information Systems (GIS) approach, the current study examines how accessibility or proximity to community features in Boston, United States related to the types of locations used and the size of an individual's "activity space," or spatial presence in the community. Significant findings include an inverse relationship between activity space size and proximity to the number and type of community features in one's immediate area. Specifically, larger activity spaces were associated with neighborhoods with less community features, and smaller activity spaces corresponded with greater availability of resources within one's immediate area. Activity space size also varied, however, based on proximity to different types of resources, namely transportation and health care. Greater community function, or the ability to navigate and use community resources, was associated with better accessibility and feeling part of the community. Finally, proximity to a greater number of individual identified preferred community features was associated with better social integration. The current study suggests the ongoing challenges of successful integration may vary not just based on accessibility to, but relative importance of, specific community features and affinity with one's surroundings. Community integration researchers and housing providers may need to attend to the meaning attached to resources, not just presence or use in the community. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Modelling land use changes according to transportation scenarios using raster based GIS indicators

    DEFF Research Database (Denmark)

    Fuglsang, Morten; Münier, Bernd; Hansen, Henning Sten

    2012-01-01

    the cellular automata model LUCIA. An Eastern Danish case area was selected, comprising the Copenhagen metropolitan area and its hinterland. The different scenarios are described using a range of different GIS datasets. These include mapping of accessibility based on public and private transportation, urban....... In the EU-FP7 research project PASHMINA (Paradigm Shift modelling and innovative approaches), three storylines of future transportation paradigm shifts towards 2050 are created. These storylines are translated into spatial planning strategies and their implication on land use changes were modelled via...... in urban distribution that different spatial planning strategies may initiate, and thus change the shape of the urban landscape. The scenarios outline different planning strategies, leading to a more homogenous urban structure, targeted at a reduction of transportation work and thus energy consumption...

  15. GIS coupled Multiple Criteria based Decision Support for Classification of Urban Coastal Areas in India

    Science.gov (United States)

    Dhiman, R.; Kalbar, P.; Inamdar, A. B.

    2017-12-01

    Coastal area classification in India is a challenge for federal and state government agencies due to fragile institutional framework, unclear directions in implementation of costal regulations and violations happening at private and government level. This work is an attempt to improvise the objectivity of existing classification methods to synergies the ecological systems and socioeconomic development in coastal cities. We developed a Geographic information system coupled Multi-criteria Decision Making (GIS-MCDM) approach to classify urban coastal areas where utility functions are used to transform the costal features into quantitative membership values after assessing the sensitivity of urban coastal ecosystem. Furthermore, these membership values for costal features are applied in different weighting schemes to derive Coastal Area Index (CAI) which classifies the coastal areas in four distinct categories viz. 1) No Development Zone, 2) Highly Sensitive Zone, 3) Moderately Sensitive Zone and 4) Low Sensitive Zone based on the sensitivity of urban coastal ecosystem. Mumbai, a coastal megacity in India is used as case study for demonstration of proposed method. Finally, uncertainty analysis using Monte Carlo approach to validate the sensitivity of CAI under specific multiple scenarios is carried out. Results of CAI method shows the clear demarcation of coastal areas in GIS environment based on the ecological sensitivity. CAI provides better decision support for federal and state level agencies to classify urban coastal areas according to the regional requirement of coastal resources considering resilience and sustainable development. CAI method will strengthen the existing institutional framework for decision making in classification of urban coastal areas where most effective coastal management options can be proposed.

  16. Assembly and concept of a web-based GIS within the paleolimnological project CONTINENT (Lake Baikal, Russia)

    OpenAIRE

    B. Heim; Jens Klump; N. Fagel; Hedi Oberhänsli

    2008-01-01

    Web-based Geographical Information Systems (GIS) are excellent tools within interdisciplinary and multi-national geoscience projects to exchange and visualize project data. The web-based GIS presented in this paper was designed for the paleolimnological project 'High-resolution CONTINENTal paleoclimate record in Lake Baikal' (CONTINENT) (Lake Baikal, Siberia, Russia) to allow the interactive handling of spatial data. The GIS database combines project data (core positions, sample positions, th...

  17. Enabling Participatory Decision Making Through Web-Based GIS

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, Grant; Yam, Kevin; Hassas, Aranak [York Univ., Toronto, ON (Canada). Faculty of Environmental Studies

    2001-07-01

    , morals, ethical behaviour, our relationship with, and obligations to fellow human beings, animals, and the environment. People perceive that information travels essentially one way in the processes and the voices of the community and its members are not heard. Subsequently, they feel excluded from the actual decision making process and even from being able to participate meaningfully in the process. Recent advances in informatics and geomatics technology, such as the Internet, web-based software and geographic information systems (GIS), have made it possible to address these issues more effectively. We believe that the combined features of two software developed at the York Centre for Applied Sustainability can facilitate access to information, provide a virtual forum for discussion and debate, and it possible for individuals to participate in decision making process, and to infer peoples' values from their choice criteria selection.

  18. Creation of a Web-Based GIS Server and Custom Geoprocessing Tools for Enhanced Hydrologic Applications

    Science.gov (United States)

    Welton, B.; Chouinard, K.; Sultan, M.; Becker, D.; Milewski, A.; Becker, R.

    2010-12-01

    Rising populations in the arid and semi arid parts of the World are increasing the demand for fresh water supplies worldwide. Many data sets needed for assessment of hydrologic applications across vast regions of the world are expensive, unpublished, difficult to obtain, or at varying scales which complicates their use. Fortunately, this situation is changing with the development of global remote sensing datasets and web-based platforms such as GIS Server. GIS provides a cost effective vehicle for comparing, analyzing, and querying a variety of spatial datasets as geographically referenced layers. We have recently constructed a web-based GIS, that incorporates all relevant geological, geochemical, geophysical, and remote sensing data sets that were readily used to identify reservoir types and potential well locations on local and regional scales in various tectonic settings including: (1) extensional environment (Red Sea rift), (2) transcurrent fault system (Najd Fault in the Arabian-Nubian Shield), and (3) compressional environments (Himalayas). The web-based GIS could also be used to detect spatial and temporal trends in precipitation, recharge, and runoff in large watersheds on local, regional, and continental scales. These applications were enabled through the construction of a web-based ArcGIS Server with Google Map’s interface and the development of customized geoprocessing tools. ArcGIS Server provides out-of-the-box setups that are generic in nature. This platform includes all of the standard web based GIS tools (e.g. pan, zoom, identify, search, data querying, and measurement). In addition to the standard suite of tools provided by ArcGIS Server an additional set of advanced data manipulation and display tools was also developed to allow for a more complete and customizable view of the area of interest. The most notable addition to the standard GIS Server tools is the custom on-demand geoprocessing tools (e.g., graph, statistical functions, custom raster

  19. Security attack detection algorithm for electric power gis system based on mobile application

    Science.gov (United States)

    Zhou, Chao; Feng, Renjun; Wang, Liming; Huang, Wei; Guo, Yajuan

    2017-05-01

    Electric power GIS is one of the key information technologies to satisfy the power grid construction in China, and widely used in power grid construction planning, weather, and power distribution management. The introduction of electric power GIS based on mobile applications is an effective extension of the geographic information system that has been widely used in the electric power industry. It provides reliable, cheap and sustainable power service for the country. The accurate state estimation is the important conditions to maintain the normal operation of the electric power GIS. Recent research has shown that attackers can inject the complex false data into the power system. The injection attack of this new type of false data (load integrity attack LIA) can successfully bypass the routine detection to achieve the purpose of attack, so that the control center will make a series of wrong decision. Eventually, leading to uneven distribution of power in the grid. In order to ensure the safety of the electric power GIS system based on mobile application, it is very important to analyze the attack mechanism and propose a new type of attack, and to study the corresponding detection method and prevention strategy in the environment of electric power GIS system based on mobile application.

  20. RacerGISOnline: Enhancing Learning in Marketing Classes with Web-Based Business GIS

    Science.gov (United States)

    Miller, Fred L.; Mangold, W. Glynn; Roach, Joy; Brockway, Gary; Johnston, Timothy; Linnhoff, Stefan; McNeely, Sam; Smith, Kathy; Holmes, Terence

    2014-01-01

    Geographic Information Systems (GIS) offer geospatial analytical tools with great potential for applications in marketing decision making. However, for various reasons, the rate of adoption of these tools in academic marketing programs has lagged behind that of marketing practitioners. RacerGISOnline is an innovative approach to integrating these…

  1. A GIS-BASED ENVIRONMENTAL HEALTH INFORMATION SOURCE FOR MALAYSIAN CONTEXT

    Directory of Open Access Journals (Sweden)

    Lau Tiu Chung

    2013-04-01

    Full Text Available In this paper, we propose a GIS-based system for collection and targeted distribution of latest alerts and real-time environmental factors to the Malaysian population. We call it the Environmental Health Management System (EHMS. This GIS-based system is designed to facilitate and encourage research into environmental health quality issues by providing a comprehensive tracking and monitoring tool. This GIS-based system is embedded with Google Maps API and Geocoding API services to visualize the location and environmental health reports from the aggregated online newspaper and social media news feeds. We introduce the design and implementation of EHMS, including the web frontend, backend, ontology, database, data acquisition, classification engine, and the standard news feeds.

  2. Study of Earthquake Disaster Prediction System of Langfang city Based on GIS

    Science.gov (United States)

    Huang, Meng; Zhang, Dian; Li, Pan; Zhang, YunHui; Zhang, RuoFei

    2017-07-01

    In this paper, according to the status of China’s need to improve the ability of earthquake disaster prevention, this paper puts forward the implementation plan of earthquake disaster prediction system of Langfang city based on GIS. Based on the GIS spatial database, coordinate transformation technology, GIS spatial analysis technology and PHP development technology, the seismic damage factor algorithm is used to predict the damage of the city under different intensity earthquake disaster conditions. The earthquake disaster prediction system of Langfang city is based on the B / S system architecture. Degree and spatial distribution and two-dimensional visualization display, comprehensive query analysis and efficient auxiliary decision-making function to determine the weak earthquake in the city and rapid warning. The system has realized the transformation of the city’s earthquake disaster reduction work from static planning to dynamic management, and improved the city’s earthquake and disaster prevention capability.

  3. Defining Primary Care Shortage Areas: Do GIS-based Measures Yield Different Results?

    Science.gov (United States)

    Daly, Michael R; Mellor, Jennifer M; Millones, Marco

    2018-02-12

    To examine whether geographic information systems (GIS)-based physician-to-population ratios (PPRs) yield determinations of geographic primary care shortage areas that differ from those based on bounded-area PPRs like those used in the Health Professional Shortage Area (HPSA) designation process. We used geocoded data on primary care physician (PCP) locations and census block population counts from 1 US state to construct 2 shortage area indicators. The first is a bounded-area shortage indicator defined without GIS methods; the second is a GIS-based measure that measures the populations' spatial proximity to PCP locations. We examined agreement and disagreement between bounded shortage areas and GIS-based shortage areas. Bounded shortage area indicators and GIS-based shortage area indicators agree for the census blocks where the vast majority of our study populations reside. Specifically, 95% and 98% of the populations in our full and urban samples, respectively, reside in census blocks where the 2 indicators agree. Although agreement is generally high in rural areas (ie, 87% of the rural population reside in census blocks where the 2 indicators agree), agreement is significantly lower compared to urban areas. One source of disagreement suggests that bounded-area measures may "overlook" some shortages in rural areas; however, other aspects of the HPSA designation process likely mitigate this concern. Another source of disagreement arises from the border-crossing problem, and it is more prevalent. The GIS-based PPRs we employed would yield shortage area determinations that are similar to those based on bounded-area PPRs defined for Primary Care Service Areas. Disagreement rates were lower than previous studies have found. © 2018 National Rural Health Association.

  4. GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran.

    Science.gov (United States)

    Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

    2015-01-01

    Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor's Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the car

  5. GIS based analysis of Intercity Fatal Road Traffic Accidents in Iran

    Science.gov (United States)

    Alizadeh, A; Zare, M; Darparesh, M; Mohseni, S; Soleimani-Ahmadi, M

    2015-01-01

    Road traffic accidents including intercity car traffic accidents (ICTAs) are among the most important causes of morbidity and mortality due to the growing number of vehicles, risky behaviors, and changes in lifestyle of the general population. A sound knowledge of the geographical distribution of car traffic accidents can be considered as an approach towards the accident causation and it can be used as an administrative tool in allocating the sources for traffic accidents prevention. This study was conducted to investigate the geographical distribution and the time trend of fatal intercity car traffic accidents in Iran. To conduct this descriptive study, all Iranian intercity road traffic mortality data were obtained from the Police reports in the Statistical Yearbook of the Governor’s Budget and Planning. The obtained data were for 17 complete Iranian calendar years from March 1997 to March 2012. The incidence rate (IR) of fatal ICTAs for each year was calculated as the total number of fatal ICTAs in every 100000 population in specified time intervals. Figures and maps indicating the trends and geographical distribution of fatal ICTAs were prepared while using Microsoft Excel and ArcGis9.2 software. The number of fatal car accidents showed a general increasing trend from 3000 in 1996 to 13500 in 2012. The incidence of fatal intercity car accidents has changed from six in 100000 population in 1996 to 18 in 100000 population in 2012. GIS based data showed that the incidence rate of ICTAs in different provinces of Iran was very divergent. The highest incidence of fatal ICTAs was in Semnan province (IR= 35.2), followed by North Khorasan (IR=22.7), and South Khorasan (IR=22). The least incidence of fatal ICTAs was in Tehran province (IR=2.4) followed by Khozestan (IR=6.5), and Eastern Azarbayejan (IR=6.6). The compensation cost of fatal ICTAs also showed an increasing trend during the studied period. Since an increasing amount of money was being paid yearly for the

  6. A GIS-based atmospheric dispersion model for pollutants emitted by complex source areas.

    Science.gov (United States)

    Teggi, Sergio; Costanzini, Sofia; Ghermandi, Grazia; Malagoli, Carlotta; Vinceti, Marco

    2018-01-01

    Gaussian dispersion models are widely used to simulate the concentrations and deposition fluxes of pollutants emitted by source areas. Very often, the calculation time limits the number of sources and receptors and the geometry of the sources must be simple and without holes. This paper presents CAREA, a new GIS-based Gaussian model for complex source areas. CAREA was coded in the Python language, and is largely based on a simplified formulation of the very popular and recognized AERMOD model. The model allows users to define in a GIS environment thousands of gridded or scattered receptors and thousands of complex sources with hundreds of vertices and holes. CAREA computes ground level, or near ground level, concentrations and dry deposition fluxes of pollutants. The input/output and the runs of the model can be completely managed in GIS environment (e.g. inside a GIS project). The paper presents the CAREA formulation and its applications to very complex test cases. The tests shows that the processing time are satisfactory and that the definition of sources and receptors and the output retrieval are quite easy in a GIS environment. CAREA and AERMOD are compared using simple and reproducible test cases. The comparison shows that CAREA satisfactorily reproduces AERMOD simulations and is considerably faster than AERMOD. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. GIS based application tool -- history of East India Company

    Science.gov (United States)

    Phophaliya, Sudhir

    The emphasis of the thesis is to build an intuitive and robust GIS (Geographic Information systems) Tool which gives an in depth information on history of East India Company. The GIS tool also incorporates various achievements of East India Company which helped to establish their business all over world especially India. The user has the option to select these movements and acts by clicking on any of the marked states on the World map. The World Map also incorporates key features for East India Company like landing of East India Company in India, Darjeeling Tea Establishment, East India Company Stock Redemption Act etc. The user can know more about these features simply by clicking on each of them. The primary focus of the tool is to give the user a unique insight about East India Company; for this the tool has several HTML (Hypertext markup language) pages which the user can select. These HTML pages give information on various topics like the first Voyage, Trade with China, 1857 Revolt etc. The tool has been developed in JAVA. For the Indian map MOJO (Map Objects Java Objects) is used. MOJO is developed by ESRI. The major features shown on the World map was designed using MOJO. MOJO made it easy to incorporate the statistical data with these features. The user interface was intentionally kept simple and easy to use. To keep the user engaged, key aspects are explained using HTML pages. The idea is that pictures will help the user garner interest in the history of East India Company.

  8. Methodology for a GIS-based damage assessment for researchers following large scale disasters

    Science.gov (United States)

    Crawford, Patrick Shane

    The 1990s were designated the International Decade for Natural Disaster Reduction by the United Nations General Assembly. This push for decrease of loss of life, property destruction, and social and economic disruption brought advancements in disaster management, including damage assessment. Damage assessment in the wake of natural and manmade disasters is a useful tool for government agencies, insurance companies, and researchers. As technologies evolve damage assessment processes constantly evolve as well. Alongside the advances in Geographic Information Systems (GIS), remote sensing, and Global Positioning System (GPS) technology, as well as the growing awareness of the needs of a standard operating procedure for GIS-based damage assessment and a need to make the damage assessment process as quick and accurate as possible, damage assessment procedures are becoming easier to execute and the results are becoming more accurate and robust. With these technological breakthroughs, multi-disciplinary damage assessment reconnaissance teams have become more efficient in their assessment methods through better organization and more robust through addition of new datasets. Damage assessment personnel are aided by software tools that offer high-level analysis and increasingly rapid damage assessment methods. GIS software has advanced the damage assessment methods of these teams by combining remotely sensed aerial imagery, GPS, and other technologies to expand the uses of the data. GIS allows researchers to use aerial imagery to show field collected data in the geographic location that it was collected so that information can be revisited, measurements can be taken, and data can be disseminated to other researchers and the public. The GIS-based data available to the reconnaissance team includes photographs of damage, worksheets, calculations, voice messages collected while studying the affected area, and many other datasets which are based on the type of disaster and the

  9. A positioning system for forest diseases and pests based on GIS and PTZ camera

    International Nuclear Information System (INIS)

    Wang, Z B; Zhao, F F; Wang, C B; Wang, L L

    2014-01-01

    Forest diseases and pests cause enormous economic losses and ecological damage every year in China. To prevent and control forest diseases and pests, the key is to get accurate information timely. In order to improve monitoring coverage rate and economize on manpower, a cooperative investigation model for forest diseases and pests is put forward. It is composed of video positioning system and manual labor reconnaissance with mobile GIS embedded in PDA. Video system is used to scan the disaster area, and is particularly effective on where trees are withered. Forest diseases prevention and control workers can check disaster area with PDA system. To support this investigation model, we developed a positioning algorithm and a positioning system. The positioning algorithm is based on DEM and PTZ camera. Moreover, the algorithm accuracy is validated. The software consists of 3D GIS subsystem, 2D GIS subsystem, video control subsystem and disaster positioning subsystem. 3D GIS subsystem makes positioning visual, and practically easy to operate. 2D GIS subsystem can output disaster thematic map. Video control subsystem can change Pan/Tilt/Zoom of a digital camera remotely, to focus on the suspected area. Disaster positioning subsystem implements the positioning algorithm. It is proved that the positioning system can observe forest diseases and pests in practical application for forest departments

  10. Using catenas for GIS-based mapping of NW Mediterranean littoral habitats

    Science.gov (United States)

    Mariani, Simone; Cefalì, Maria Elena; Terradas, Marc; Chappuis, Eglantine; Ballesteros, Enric

    2014-06-01

    Studies aimed at describing habitats and mapping their distributions are pivotal to implementing management plans and to effectively guide conservation measures. We developed a novel approach of data collection and entry (CAT-LIT) to establish a detailed cartography of the littoral habitats found along the Catalan coast (Spain). Field data were recorded using coded, two-digit hierarchical lists (e.g. Aa, Ab, etc.) of horizons found at each point along the coast, called catenas. The horizons were either dominated by species (on the rocky bottoms) or sediment types (on the beaches) and corresponded to LPRE, EUNIS and CORINE habitats. Catenas were transferred into a database and calculations about the extent of bottom types, habitats, and catenas themselves along the coast were carried out with GIS tools. In addition, habitat link richness was calculated and represented using network analysis programs. The application of CAT-LIT to the Catalan coast showed that the habitats dominated by the lichen Verrucaria amphibia and the flattened barnacle Euraphia depressa and those dominated by the barnacle Chthamalus spp. were almost ubiquitous. Those dominated by the red alga Corallina elongata, the mussel Mytilus galloprovincialis and the red alga Rissoella verruculosa were also common. Because of the frequency of their connections, those habitats formed a huge hub of links in the networks. By using catenas, the habitats can be viewed using GIS based programs keeping the catena as the main informational and ecological unit. The catenas allow maximum compactness when vertically distributed habitats are to be shown on a 2D map. The complete cartography and dataset on the spatial distribution of the littoral habitats from Catalonia is valuable for coastal management and conservation to study changes in the habitat distribution and relate such changes to anthropogenic pressures. Furthermore, the CAT-LIT can be easily adapted to shores of other seas and oceans to obtain accurate

  11. Development of integrated evaluation information system for sandstone-hosted uranium deposits based on ComGIS

    International Nuclear Information System (INIS)

    Ke Dan; Han Shaoyang; Hou Huiqun; Hu Shuiqing

    2006-01-01

    Component GIS owns many merits such as flexible function and easy to be used, which makes it very suitable for the development of professional GIS application system in geoscience field. During the process of exploration and evaluation for uranium resources, computer application system has been a powerful tool owning to the following functions: professional processing, management and storage of data, spatial analysis, visualization and mapping, etc. In this paper technological routine is presented for the development of integrated evaluation information system for sandstone-hosted uranium deposits based on ArcGIS Engine. General GIS functions can be realized with ArcGIS Engine easily and quickly, the developers could concentrate their attentions on developing professional functions, which will shorten the developing period and make the system more efficient. It is showed that the system developed on ArcGIS Engine platform is stable in operation, flexible in functions and professional in application. (authors)

  12. Evaluating terrain based criteria for snow avalanche exposure ratings using GIS

    Science.gov (United States)

    Delparte, Donna; Jamieson, Bruce; Waters, Nigel

    2010-05-01

    Snow avalanche terrain in backcountry regions of Canada is increasingly being assessed based upon the Avalanche Terrain Exposure Scale (ATES). ATES is a terrain based classification introduced in 2004 by Parks Canada to identify "simple", "challenging" and "complex" backcountry areas. The ATES rating system has been applied to well over 200 backcountry routes, has been used in guidebooks, trailhead signs and maps and is part of the trip planning component of the AVALUATOR™, a simple decision-support tool for backcountry users. Geographic Information Systems (GIS) offers a means to model and visualize terrain based criteria through the use of digital elevation model (DEM) and land cover data. Primary topographic variables such as slope, aspect and curvature are easily derived from a DEM and are compatible with the equivalent evaluation criteria in ATES. Other components of the ATES classification are difficult to extract from a DEM as they are not strictly terrain based. An overview is provided of the terrain variables that can be generated from DEM and land cover data; criteria from ATES which are not clearly terrain based are identified for further study or revision. The second component of this investigation was the development of an algorithm for inputting suitable ATES criteria into a GIS, thereby mimicking the process avalanche experts use when applying the ATES classification to snow avalanche terrain. GIS based classifications were compared to existing expert assessments for validity. The advantage of automating the ATES classification process through GIS is to assist avalanche experts with categorizing and mapping remote backcountry terrain.

  13. A GIS Approach to Wind,SST(Sea Surface Temperature) and CHL(Chlorophyll) variations in the Caspian Sea

    Science.gov (United States)

    Mirkhalili, Seyedhamzeh

    2016-07-01

    Chlorophyll is an extremely important bio-molecule, critical in photosynthesis, which allows plants to absorb energy from light. At the base of the ocean food web are single-celled algae and other plant-like organisms known as Phytoplankton. Like plants on land, Phytoplankton use chlorophyll and other light-harvesting pigments to carry out photosynthesis. Where Phytoplankton grow depends on available sunlight, temperature, and nutrient levels. In this research a GIS Approach using ARCGIS software and QuikSCAT satellite data was applied to visualize WIND,SST(Sea Surface Temperature) and CHL(Chlorophyll) variations in the Caspian Sea.Results indicate that increase in chlorophyll concentration in coastal areas is primarily driven by terrestrial nutrients and does not imply that warmer SST will lead to an increase in chlorophyll concentration and consequently Phytoplankton abundance.

  14. GIS-based landscape design research: Stourhead landscape garden as a case study

    Directory of Open Access Journals (Sweden)

    Steffen Nijhuis

    2017-11-01

    Full Text Available Landscape design research is important for cultivating spatial intelligence in landscape architecture. This study explores GIS (geographic information systems as a tool for landscape design research - investigating landscape designs to understand them as architectonic compositions (architectonic plan analysis. The concept ‘composition’ refers to a conceivable arrangement, an architectural expression of a mental construct that is legible and open to interpretation. Landscape architectonic compositions and their representations embody a great wealth of design knowledge as objects of our material culture and reflect the possible treatment of the ground, space, image and program as a characteristic coherence. By exploring landscape architectonic compositions with GIS, design researchers can acquire design knowledge that can be used in the creation and refinement of a design.  The research aims to identify and illustrate the potential role of GIS as a tool in landscape design research, so as to provide insight into the possibilities and limitations of using GIS in this capacity. The critical, information-oriented case of Stourhead landscape garden (Wiltshire, UK, an example of a designed landscape that covers the scope and remit of landscape architecture design, forms the heart of the study. The exploration of Stourhead by means of GIS can be understood as a plausibility probe. Here the case study is considered a form of ‘quasi-experiment’, testing the hypothesis and generating a learning process that constitutes a prerequisite for advanced understanding, while using an adjusted version of the framework for landscape design analysis by Steenbergen and Reh (2003. This is a theoretically informed analytical method based on the formal interpretation of the landscape architectonic composition addressing four landscape architectonic categories: the basic, the spatial, the symbolic and the programmatic form. This study includes new aspects to be

  15. Geomorphodiversity derived by a GIS-based geomorphological map: case study the Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Demek, J.; Kirchner, Karel; Mackovčin, P.; Slavík, P.

    2011-01-01

    Roč. 55, č. 4 (2011), s. 415-436 ISSN 0372-8854 Institutional research plan: CEZ:AV0Z30860518 Keywords : geomorphodiversity * GIS geomorphological data base * GIS-geomorphological map * Czech Republic Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.642, year: 2011 http://www.ingentaconnect.com/content/schweiz/zfg/2011/00000055/00000004/art00001?token=004d10697e442f2067217d763b442c233e46533f34687627504541676249266d656cbe1a808f2

  16. Design and realization of tourism spatial decision support system based on GIS

    Science.gov (United States)

    Ma, Zhangbao; Qi, Qingwen; Xu, Li

    2008-10-01

    In this paper, the existing problems of current tourism management information system are analyzed. GIS, tourism as well as spatial decision support system are introduced, and the application of geographic information system technology and spatial decision support system to tourism management and the establishment of tourism spatial decision support system based on GIS are proposed. System total structure, system hardware and software environment, database design and structure module design of this system are introduced. Finally, realization methods of this systemic core functions are elaborated.

  17. A web GIS based integrated flood assessment modeling tool for coastal urban watersheds

    Science.gov (United States)

    Kulkarni, A. T.; Mohanty, J.; Eldho, T. I.; Rao, E. P.; Mohan, B. K.

    2014-03-01

    Urban flooding has become an increasingly important issue in many parts of the world. In this study, an integrated flood assessment model (IFAM) is presented for the coastal urban flood simulation. A web based GIS framework has been adopted to organize the spatial datasets for the study area considered and to run the model within this framework. The integrated flood model consists of a mass balance based 1-D overland flow model, 1-D finite element based channel flow model based on diffusion wave approximation and a quasi 2-D raster flood inundation model based on the continuity equation. The model code is written in MATLAB and the application is integrated within a web GIS server product viz: Web Gram Server™ (WGS), developed at IIT Bombay, using Java, JSP and JQuery technologies. Its user interface is developed using open layers and the attribute data are stored in MySQL open source DBMS. The model is integrated within WGS and is called via Java script. The application has been demonstrated for two coastal urban watersheds of Navi Mumbai, India. Simulated flood extents for extreme rainfall event of 26 July, 2005 in the two urban watersheds of Navi Mumbai city are presented and discussed. The study demonstrates the effectiveness of the flood simulation tool in a web GIS environment to facilitate data access and visualization of GIS datasets and simulation results.

  18. Integrating Stakeholder Preferences and GIS-Based Multicriteria Analysis to Identify Forest Landscape Restoration Priorities

    Directory of Open Access Journals (Sweden)

    David Uribe

    2014-02-01

    Full Text Available A pressing question that arises during the planning of an ecological restoration process is: where to restore first? Answering this question is a complex task; it requires a multidimensional approach to consider economic constrains and the preferences of stakeholders. Being the problem of spatial nature, it may be explored effectively through Multicriteria Decision Analysis (MCDA performed in a Geographical Information System (GIS environment. The proposed approach is based on the definition and weighting of multiple criteria for evaluating land suitability. An MCDA-based methodology was used to identify priority areas for Forest Landscape Restoration in the Upper Mixtec region, Oaxaca (Mexico, one of the most degraded areas of Latin America. Socioeconomic and environmental criteria were selected and evaluated. The opinions of four different stakeholder groups were considered: general public, academic, Non-governmental organizations (NGOs and governmental officers. The preferences of these groups were spatially modeled to identify their priorities. The final result was a map that identifies the most preferable sites for restoration, where resources and efforts should be concentrated. MCDA proved to be a very useful tool in collective planning, when alternative sites have to be identified and prioritized to guide the restoration work.

  19. Fuzzy Shannon Entropy: A Hybrid GIS-Based Landslide Susceptibility Mapping Method

    Directory of Open Access Journals (Sweden)

    Majid Shadman Roodposhti

    2016-09-01

    Full Text Available Assessing Landslide Susceptibility Mapping (LSM contributes to reducing the risk of living with landslides. Handling the vagueness associated with LSM is a challenging task. Here we show the application of hybrid GIS-based LSM. The hybrid approach embraces fuzzy membership functions (FMFs in combination with Shannon entropy, a well-known information theory-based method. Nine landslide-related criteria, along with an inventory of landslides containing 108 recent and historic landslide points, are used to prepare a susceptibility map. A random split into training (≈70% and testing (≈30% samples are used for training and validation of the LSM model. The study area—Izeh—is located in the Khuzestan province of Iran, a highly susceptible landslide zone. The performance of the hybrid method is evaluated using receiver operating characteristics (ROC curves in combination with area under the curve (AUC. The performance of the proposed hybrid method with AUC of 0.934 is superior to multi-criteria evaluation approaches using a subjective scheme in this research in comparison with a previous study using the same dataset through extended fuzzy multi-criteria evaluation with AUC value of 0.894, and was built on the basis of decision makers’ evaluation in the same study area.

  20. An approach to delineate groundwater recharge potential sites in Ambalantota, Sri Lanka using GIS techniques

    Directory of Open Access Journals (Sweden)

    I.P. Senanayake

    2016-01-01

    Full Text Available The demand for fresh water in Hambantota District, Sri Lanka is rapidly increasing with the enormous amount of ongoing development projects in the region. Nevertheless, the district experiences periodic water stress conditions due to seasonal precipitation patterns and scarcity of surface water resources. Therefore, management of available groundwater resources is critical, to fulfil potable water requirements in the area. However, exploitation of groundwater should be carried out together with artificial recharging in order to maintain the long term sustainability of water resources. In this study, a GIS approach was used to delineate potential artificial recharge sites in Ambalantota area within Hambantota. Influential thematic layers such as rainfall, lineament, slope, drainage, land use/land cover, lithology, geomorphology and soil characteristics were integrated by using a weighted linear combination method. Results of the study reveal high to moderate groundwater recharge potential in approximately 49% of Ambalantota area.

  1. A GIS-based framework for evaluating investments in fire management: Spatial allocation of recreation values

    Science.gov (United States)

    Kenneth A. Baerenklau; Armando González-Cabán; Catrina I. Páez; Edgard Chávez

    2009-01-01

    The U.S. Forest Service is responsible for developing tools to facilitate effective and efficient fire management on wildlands and urban-wildland interfaces. Existing GIS-based fire modeling software only permits estimation of the costs of fire prevention and mitigation efforts as well as the effects of those efforts on fire behavior. This research demonstrates how the...

  2. Map-IT! A Web-Based GIS Tool for Watershed Science Education.

    Science.gov (United States)

    Curtis, David H.; Hewes, Christopher M.; Lossau, Matthew J.

    This paper describes the development of a prototypic, Web-accessible GIS solution for K-12 science education and citizen-based watershed monitoring. The server side consists of ArcView IMS running on an NT workstation. The client is built around MapCafe. The client interface, which runs through a standard Web browser, supports standard MapCafe…

  3. Health risks zonation in megacities vis-à-vis PM using GIS-based ...

    African Journals Online (AJOL)

    Since the air quality, considering PM2.5 varies over space and time, in this paper, RBF method in a based GIS model was utilized to zone air quality and its health risks upon PM2.5 concentrations dispersion over Tehran, during one year, from 21 March 2013 to 20 March 2014. The RBF method was applied to obtain the ...

  4. The Design and Implement of Tourism Information System Based on GIS

    Science.gov (United States)

    Chunchang, Fu; Nan, Zhang

    From the geographical information system concept, discusses the main contents of the geographic information system, and the current of the geographic information system key technological measures of tourism information system, the application of tourism information system for specific requirements and goals, and analyzes a relational database model based on the tourist information system in GIS application methods of realization.

  5. GIS-Based Railway Route Selection for the Proposed Kenya-Sudan ...

    African Journals Online (AJOL)

    This paper describes a procedure developed for automated railway feasibility analysis based on GIS and Multi-Criteria analysis. Good engineering railway alignment requirements are assessed and suitable factors and constraints for feasibility analysis derived. Relevant digital map layers are then prepared and reclassified ...

  6. GRASS GIS: The first Open Source Temporal GIS

    Science.gov (United States)

    Gebbert, Sören; Leppelt, Thomas

    2015-04-01

    over temporal aggregation, temporal accumulation, spatio-temporal statistics, spatio-temporal sampling, temporal algebra, temporal topology analysis, time series animation and temporal topology visualization to time series import and export capabilities with support for NetCDF and VTK data formats. We will present several temporal modules that support parallel processing of raster and 3D raster time series. [1] GRASS GIS Open Source Approaches in Spatial Data Handling In Open Source Approaches in Spatial Data Handling, Vol. 2 (2008), pp. 171-199, doi:10.1007/978-3-540-74831-19 by M. Neteler, D. Beaudette, P. Cavallini, L. Lami, J. Cepicky edited by G. Brent Hall, Michael G. Leahy [2] Gebbert, S., Pebesma, E., 2014. A temporal GIS for field based environmental modeling. Environ. Model. Softw. 53, 1-12. [3] Zambelli, P., Gebbert, S., Ciolli, M., 2013. Pygrass: An Object Oriented Python Application Programming Interface (API) for Geographic Resources Analysis Support System (GRASS) Geographic Information System (GIS). ISPRS Intl Journal of Geo-Information 2, 201-219. [4] Löwe, P., Klump, J., Thaler, J. (2012): The FOSS GIS Workbench on the GFZ Load Sharing Facility compute cluster, (Geophysical Research Abstracts Vol. 14, EGU2012-4491, 2012), General Assembly European Geosciences Union (Vienna, Austria 2012). [5] Akhter, S., Aida, K., Chemin, Y., 2010. "GRASS GIS on High Performance Computing with MPI, OpenMP and Ninf-G Programming Framework". ISPRS Conference, Kyoto, 9-12 August 2010

  7. A GIS-based time-dependent seismic source modeling of Northern Iran

    Science.gov (United States)

    Hashemi, Mahdi; Alesheikh, Ali Asghar; Zolfaghari, Mohammad Reza

    2017-01-01

    The first step in any seismic hazard study is the definition of seismogenic sources and the estimation of magnitude-frequency relationships for each source. There is as yet no standard methodology for source modeling and many researchers have worked on this topic. This study is an effort to define linear and area seismic sources for Northern Iran. The linear or fault sources are developed based on tectonic features and characteristic earthquakes while the area sources are developed based on spatial distribution of small to moderate earthquakes. Time-dependent recurrence relationships are developed for fault sources using renewal approach while time-independent frequency-magnitude relationships are proposed for area sources based on Poisson process. GIS functionalities are used in this study to introduce and incorporate spatial-temporal and geostatistical indices in delineating area seismic sources. The proposed methodology is used to model seismic sources for an area of about 500 by 400 square kilometers around Tehran. Previous researches and reports are studied to compile an earthquake/fault catalog that is as complete as possible. All events are transformed to uniform magnitude scale; duplicate events and dependent shocks are removed. Completeness and time distribution of the compiled catalog is taken into account. The proposed area and linear seismic sources in conjunction with defined recurrence relationships can be used to develop time-dependent probabilistic seismic hazard analysis of Northern Iran.

  8. A GIS-based hedonic price model for agricultural land

    Science.gov (United States)

    Demetriou, Demetris

    2015-06-01

    Land consolidation is a very effective land management planning approach that aims towards rural/agricultural sustainable development. Land reallocation which involves land tenure restructuring is the most important, complex and time consuming component of land consolidation. Land reallocation relies on land valuation since its fundamental principle provides that after consolidation, each landowner shall be granted a property of an aggregate value that is approximately the same as the value of the property owned prior to consolidation. Therefore, land value is the crucial factor for the land reallocation process and hence for the success and acceptance of the final land consolidation plan. Land valuation is a process of assigning values to all parcels (and its contents) and it is usually carried out by an ad-hoc committee. However, the process faces some problems such as it is time consuming hence costly, outcomes may present inconsistency since it is carried out manually and empirically without employing systematic analytical tools and in particular spatial analysis tools and techniques such as statistical/mathematical. A solution to these problems can be the employment of mass appraisal land valuation methods using automated valuation models (AVM) based on international standards. In this context, this paper presents a spatial based linear hedonic price model which has been developed and tested in a case study land consolidation area in Cyprus. Results showed that the AVM is capable to produce acceptable in terms of accuracy and reliability land values and to reduce time hence cost required by around 80%.

  9. Mapping Urban Heat Demand with the Use of GIS-Based Tools

    Directory of Open Access Journals (Sweden)

    Artur Wyrwa

    2017-05-01

    Full Text Available This article presents a bottom-up approach for calculation of the useful heat demand for space heating and hot water preparation using geo-referenced datasets for buildings at the city level. This geographic information system (GIS based approach was applied in the case study for the city of Krakow, where on the one hand the district heat network is well developed, while on the other hand there are still substantial number of buildings burning solid fuels in individual boilers and stoves, causing air pollution. The calculated heat demand was aggregated in the grid with 100 m × 100 m spatial resolution to deliver the heat map depicting the current situation for 21 buildings types. The results show that the residential buildings, in particular one- and multi-family buildings, have the highest share in overall demand for heat. By combining the results with location of the district heat (DH network, the potential areas in its close vicinity that have sufficient heat demand density for developing the net were pointed out. Future evolution in heat demand for space heating in one-family houses was evaluated with the use of deterministic method employing building stock model. The study lays a foundation for planning the development of the heating system at the city level.

  10. Virtual Cultural Landscape Laboratory Based on Internet GIS Technology

    Science.gov (United States)

    Bill, R.

    2012-07-01

    In recent years the transfer of old documents (books, paintings, maps etc.) from analogue to digital form has gained enormous importance. Numerous interventions are concentrated in the digitalisation of library collections, but also commercial companies like Microsoft or Google try to convert large analogue stocks such as books, paintings, etc. in digital form. Data in digital form can be much easier made accessible to a large user community, especially to the interested scientific community. The aim of the described research project is to set up a virtual research environment for interdisciplinary research focusing on the landscape of the historical Mecklenburg in the north-east of Germany. Georeferenced old maps from 1786 and 1890 covering complete Mecklenburg should be combined with current geo-information, satellite and aerial imagery to support spatio-temporal research aspects in different scales in space (regional 1:200,000 to local 1:25.000) and time (nearly 250 years in three time steps, the last 30 years also in three time slices). The Virtual Laboratory for Cultural Landscape Research (VKLandLab) is designed and developed by the Chair of Geodesy and Geoinformatics, hosted at the Computing Centre (ITMZ) and linked to the Digital Library (UB) at Rostock University. VKLandLab includes new developments such as wikis, blogs, data tagging, etc. and proven components already integrated in various data-related infrastructures such as InternetGIS, data repositories and authentication structures. The focus is to build a data-related infrastructure and a work platform that supports students as well as researchers from different disciplines in their research in space and time.

  11. VIRTUAL CULTURAL LANDSCAPE LABORATORY BASED ON INTERNET GIS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    R. Bill

    2012-07-01

    Full Text Available In recent years the transfer of old documents (books, paintings, maps etc. from analogue to digital form has gained enormous importance. Numerous interventions are concentrated in the digitalisation of library collections, but also commercial companies like Microsoft or Google try to convert large analogue stocks such as books, paintings, etc. in digital form. Data in digital form can be much easier made accessible to a large user community, especially to the interested scientific community. The aim of the described research project is to set up a virtual research environment for interdisciplinary research focusing on the landscape of the historical Mecklenburg in the north-east of Germany. Georeferenced old maps from 1786 and 1890 covering complete Mecklenburg should be combined with current geo-information, satellite and aerial imagery to support spatio-temporal research aspects in different scales in space (regional 1:200,000 to local 1:25.000 and time (nearly 250 years in three time steps, the last 30 years also in three time slices. The Virtual Laboratory for Cultural Landscape Research (VKLandLab is designed and developed by the Chair of Geodesy and Geoinformatics, hosted at the Computing Centre (ITMZ and linked to the Digital Library (UB at Rostock University. VKLandLab includes new developments such as wikis, blogs, data tagging, etc. and proven components already integrated in various data-related infrastructures such as InternetGIS, data repositories and authentication structures. The focus is to build a data-related infrastructure and a work platform that supports students as well as researchers from different disciplines in their research in space and time.

  12. A WebGIS-based system for analyzing and visualizing air quality data for Shanghai Municipality

    Science.gov (United States)

    Wang, Manyi; Liu, Chaoshun; Gao, Wei

    2014-10-01

    An online visual analytical system based on Java Web and WebGIS for air quality data for Shanghai Municipality was designed and implemented to quantitatively analyze and qualitatively visualize air quality data. By analyzing the architecture of WebGIS and Java Web, we firstly designed the overall scheme for system architecture, then put forward the software and hardware environment and also determined the main function modules for the system. The visual system was ultimately established with the DIV + CSS layout method combined with JSP, JavaScript, and some other computer programming languages based on the Java programming environment. Moreover, Struts, Spring, and Hibernate frameworks (SSH) were integrated in the system for the purpose of easy maintenance and expansion. To provide mapping service and spatial analysis functions, we selected ArcGIS for Server as the GIS server. We also used Oracle database and ESRI file geodatabase to store spatial data and non-spatial data in order to ensure the data security. In addition, the response data from the Web server are resampled to implement rapid visualization through the browser. The experimental successes indicate that this system can quickly respond to user's requests, and efficiently return the accurate processing results.

  13. A Framework for Sharing and Integrating Remote Sensing and GIS Models Based on Web Service

    Science.gov (United States)

    Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin

    2014-01-01

    Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a “black box” and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users. PMID:24901016

  14. WATERSHED BASED WEB GIS: CASE STUDY OF PALOPO WATERSHED AREA SOUTH SULAWESI, INDONESIA

    Directory of Open Access Journals (Sweden)

    Jalaluddin Rumi PRASAD

    2017-09-01

    Full Text Available Data and land resource information complete, accurate, and current is an input in management planning, evaluation, and monitoring Watershed. Implementation of this research is conducted with optimum utilization of secondary data that is supported by direct field measurement data, digitalizing the maps associated, Geographic Information Systems modeling, and model calibration. This research has resulted in a Geographic Information System Management of potential Watershed GIS Web-based or abbreviated WEB GIS MPPDAS using Palopo watershed area, South Sulawesi as a case study sites for the development of a prototype that consists of three applications the main website ie Web Portal, Web GIS, and Web Tutorial. The system is built to show online (and offline maps watershed in the administrative area of Palopo along with the location of its potential accumulated in the four (4 groups of layers, including groups of main layer (2 layer, a group of base layer (14 layers, groups of thematic layers (12 layers, a group of policy layer (8 layer. In addition to display a map, use the WEB application of GIS MPPDAS can also use tools or controls in the application to perform analyzes in its monitoring and evaluation, including: Geocoding, Add layer, Digitizing, Selection, Measurements, Graph, Filtering, Geolocation, Overlay cartographic, and etc.

  15. A framework for sharing and integrating remote sensing and GIS models based on Web service.

    Science.gov (United States)

    Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin

    2014-01-01

    Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a "black box" and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users.

  16. Hillslope chemical weathering across Paraná, Brazil: A data mining-GIS hybrid approach

    Science.gov (United States)

    Iwashita, Fabio; Friedel, Michael J.; Filho, Carlos Roberto de Souza; Fraser, Stephen J.

    2011-09-01

    Self-organizing map (SOM) and geographic information system (GIS) models were used to investigate the nonlinear relationships associated with geochemical weathering processes at local (~100 km 2) and regional (~50,000 km 2) scales. The data set consisted of 1) 22 B-horizon soil variables: P, C, pH, Al, total acidity, Ca, Mg, K, total cation exchange capacity, sum of exchangeable bases, base saturation, Cu, Zn, Fe, B, S, Mn, gammaspectrometry (total count, potassium, thorium, and uranium) and magnetic susceptibility measures; and 2) six topographic variables: elevation, slope, aspect, hydrological accumulated flux, horizontal curvature and vertical curvature. It is characterized at 304 locations from a quasi-regular grid spaced about 24 km across the state of Paraná. This data base was split into two subsets: one for analysis and modeling (274 samples) and the other for validation (30 samples) purposes. The self-organizing map and clustering methods were used to identify and classify the relations among solid-phase chemical element concentrations and GIS derived topographic models. The correlation between elevation and k-means clusters related the relative position inside hydrologic macro basins, which was interpreted as an expression of the weathering process reaching a steady-state condition at the regional scale. Locally, the chemical element concentrations were related to the vertical curvature representing concave-convex hillslope features, where concave hillslopes with convergent flux tends to be a reducing environment and convex hillslopes with divergent flux, oxidizing environments. Stochastic cross validation demonstrated that the SOM produced unbiased classifications and quantified the relative amount of uncertainty in predictions. This work strengthens the hypothesis that, at B-horizon steady-state conditions, the terrain morphometry were linked with the soil geochemical weathering in a two-way dependent process: the topographic relief was a factor on

  17. Hillslope chemical weathering across Paraná, Brazil: a data mining-GIS hybrid approach

    Science.gov (United States)

    Iwashita, Fabio; Friedel, Michael J.; Filho, Carlos Roberto de Souza; Fraser, Stephen J.

    2011-01-01

    Self-organizing map (SOM) and geographic information system (GIS) models were used to investigate the nonlinear relationships associated with geochemical weathering processes at local (~100 km2) and regional (~50,000 km2) scales. The data set consisted of 1) 22 B-horizon soil variables: P, C, pH, Al, total acidity, Ca, Mg, K, total cation exchange capacity, sum of exchangeable bases, base saturation, Cu, Zn, Fe, B, S, Mn, gammaspectrometry (total count, potassium, thorium, and uranium) and magnetic susceptibility measures; and 2) six topographic variables: elevation, slope, aspect, hydrological accumulated flux, horizontal curvature and vertical curvature. It is characterized at 304 locations from a quasi-regular grid spaced about 24 km across the state of Paraná. This data base was split into two subsets: one for analysis and modeling (274 samples) and the other for validation (30 samples) purposes. The self-organizing map and clustering methods were used to identify and classify the relations among solid-phase chemical element concentrations and GIS derived topographic models. The correlation between elevation and k-means clusters related the relative position inside hydrologic macro basins, which was interpreted as an expression of the weathering process reaching a steady-state condition at the regional scale. Locally, the chemical element concentrations were related to the vertical curvature representing concave–convex hillslope features, where concave hillslopes with convergent flux tends to be a reducing environment and convex hillslopes with divergent flux, oxidizing environments. Stochastic cross validation demonstrated that the SOM produced unbiased classifications and quantified the relative amount of uncertainty in predictions. This work strengthens the hypothesis that, at B-horizon steady-state conditions, the terrain morphometry were linked with the soil geochemical weathering in a two-way dependent process: the topographic relief was a factor on

  18. Renewables in residential development. An integrated GIS-based multicriteria approach for decentralized micro-renewable energy production in new settlement development. A case study of the eastern metropolitan area of Cagliari, Sardinia, Italy

    Energy Technology Data Exchange (ETDEWEB)

    Palmas, Claudia; Haaren, Christina von [Hannover Univ. (Germany). Dept. of Environmental Planning; Abis, Emanuela [Cagliari Univ. (Italy). Dept. of Civil, Environmental Engineering and Architecture; Lovett, Andrew [East Anglia Univ., Norwich (United Kingdom). School of Environmental Sciences

    2012-12-15

    In recent years, there has been an increasing interest in using micro-renewable energy sources. However, planning has not yet developed methodological approaches (1) for spatially optimizing residential development according to the different renewable energy potentials and (2) for integrating objectives of optimized energy efficiency with other environmental requirements and concerns. This study addresses these topics by firstly presenting a new concept for the regional planning. The methodological approach for the evaluation of spatial variations in the available energy potential was based on the combination of existing methods adapted to the local scale and data availability. For assessing the bioenergy potential, a new method was developed. Other environmental criteria for deciding about sustainable locations were identified through a survey of more than 100 expert respondents. This survey involved pairwise comparisons of relevant factors, which were then translated into relative weights using the Analytical Hierarchy Process. Subsequently, these weights were applied to factor maps in a Geographical Information System using a weighted linear combination method. In the test region, the eastern metropolitan area of Cagliari, Sardinia, this analysis resulted in the designation of suitable areas for new settlements and preferred locations for microrenewable technologies. Based on expert preferences, a number of alternatives for future housing development were identified, which can be integrated in the early stages of land use or development plans. The method proposed can be an effective tool for planners to assess changes and to identify the best solution in terms of sustainable development. (orig.)

  19. Developing Library GIS Services for Humanities and Social Science: An Action Research Approach

    Science.gov (United States)

    Kong, Ningning; Fosmire, Michael; Branch, Benjamin Dewayne

    2017-01-01

    In the academic libraries' efforts to support digital humanities and social science, GIS service plays an important role. However, there is no general service model existing about how libraries can develop GIS services to best engage with digital humanities and social science. In this study, we adopted the action research method to develop and…

  20. Ontology-based knowledge representation for resolution of semantic heterogeneity in GIS

    Science.gov (United States)

    Liu, Ying; Xiao, Han; Wang, Limin; Han, Jialing

    2017-07-01

    Lack of semantic interoperability in geographical information systems has been identified as the main obstacle for data sharing and database integration. The new method should be found to overcome the problems of semantic heterogeneity. Ontologies are considered to be one approach to support geographic information sharing. This paper presents an ontology-driven integration approach to help in detecting and possibly resolving semantic conflicts. Its originality is that each data source participating in the integration process contains an ontology that defines the meaning of its own data. This approach ensures the automation of the integration through regulation of semantic integration algorithm. Finally, land classification in field GIS is described as the example.

  1. Suitability analysis for rice growing sites using a multicriteria evaluation and GIS approach in great Mwea region, Kenya.

    Science.gov (United States)

    Kihoro, Joseph; Bosco, Njoroge J; Murage, Hunja

    2013-12-01

    Land suitability analysis is a prerequisite to achieving optimum utilization of the available land resources. Lack of knowledge on best combination of factors that suit production of rice has contributed to the low production. The aim of this study was to develop a suitability map for rice crop based on physical and climatic factors of production using a Multi-Criteria Evaluation (MCE) & GIS approach. The study was carried out in Kirinyaga, Embu and Mberee counties in Kenya. Biophysical variables of soil, climate and topography were considered for suitability analysis. All data were stored in ArcGIS 9.3 environment and the factor maps were generated. For MCE, Pairwise Comparison Matrix was applied and the suitable areas for rice crop were generated and graduated. The current land cover map of the area was developed from a scanned survey map of the rice growing areas. According to the present land cover map, the rice cultivated area was 13,369 ha. Finally, we overlaid the land cover map with the suitability map to identify variances between the present and potential land use. The crop-land evaluation results of the present study showed that, 75% of total area currently being used was under highly suitable areas and 25% was under moderately suitable areas. The results showed that the potential area for rice growing is 86,364 ha and out of this only 12% is under rice cultivation. This research provided information at local level that could be used by farmers to select cropping patterns and suitability.

  2. Web-based GIS for spatial pattern detection: application to malaria incidence in Vietnam.

    Science.gov (United States)

    Bui, Thanh Quang; Pham, Hai Minh

    2016-01-01

    There is a great concern on how to build up an interoperable health information system of public health and health information technology within the development of public information and health surveillance programme. Technically, some major issues remain regarding to health data visualization, spatial processing of health data, health information dissemination, data sharing and the access of local communities to health information. In combination with GIS, we propose a technical framework for web-based health data visualization and spatial analysis. Data was collected from open map-servers and geocoded by open data kit package and data geocoding tools. The Web-based system is designed based on Open-source frameworks and libraries. The system provides Web-based analyst tool for pattern detection through three spatial tests: Nearest neighbour, K function, and Spatial Autocorrelation. The result is a web-based GIS, through which end users can detect disease patterns via selecting area, spatial test parameters and contribute to managers and decision makers. The end users can be health practitioners, educators, local communities, health sector authorities and decision makers. This web-based system allows for the improvement of health related services to public sector users as well as citizens in a secure manner. The combination of spatial statistics and web-based GIS can be a solution that helps empower health practitioners in direct and specific intersectional actions, thus provide for better analysis, control and decision-making.

  3. A GIS Based 3D Online Decision Assistance System for Underground Energy Storage in Northern Germany

    Science.gov (United States)

    Nolde, M.; Schwanebeck, M.; Biniyaz, E.; Duttmann, R.

    2014-12-01

    We would like to present a GIS-based 3D online decision assistance system for underground energy storage. Its aim is to support the local land use planning authorities through pre-selection of possible sites for thermal, electrical and substantial underground energy storages. Since the extension of renewable energies has become legal requirement in Germany, the underground storing of superfluously produced green energy (such as during a heavy wind event) in the form of compressed air, gas or heated water has become increasingly important. However, the selection of suitable sites is a complex task. The assistance system uses data of geological features such as rock layers, salt caverns and faults enriched with attribute data such as rock porosity and permeability. This information is combined with surface data of the existing energy infrastructure, such as locations of wind and biogas stations, power line arrangement and cable capacity, and energy distribution stations. Furthermore, legal obligations such as protected areas on the surface and current underground mining permissions are used for the decision finding process. Not only the current situation but also prospective scenarios, such as expected growth in produced amount of energy are incorporated in the system. The decision process is carried out via the 'Analytic Hierarchy Process' (AHP) methodology of the 'Multi Object Decision Making' (MODM) approach. While the process itself is completely automated, the user has full control of the weighting of the different factors via the web interface. The system is implemented as an online 3D server GIS environment, with no software needed to be installed on the user side. The results are visualized as interactive 3d graphics. The implementation of the assistance system is based exclusively on free and open source software, and utilizes the 'Python' programming language in combination with current web technologies, such as 'HTML5', 'CSS3' and 'JavaScript'. It is

  4. An ArcGIS approach to include tectonic structures in point data regionalization.

    Science.gov (United States)

    Darsow, Andreas; Schafmeister, Maria-Theresia; Hofmann, Thilo

    2009-01-01

    Point data derived from drilling logs must often be regionalized. However, aquifers may show discontinuous surface structures, such as the offset of an aquitard caused by tectonic faults. One main challenge has been to incorporate these structures into the regionalization process of point data. We combined ordinary kriging and inverse distance weighted (IDW) interpolation to account for neotectonic structures in the regionalization process. The study area chosen to test this approach is the largest porous aquifer in Austria. It consists of three basins formed by neotectonic events and delimited by steep faults with a vertical offset of the aquitard up to 70 m within very short distances. First, ordinary kriging was used to incorporate the characteristic spatial variability of the aquitard location by means of a variogram. The tectonic faults could be included into the regionalization process by using breaklines with buffer zones. All data points inside the buffer were deleted. Last, IDW was performed, resulting in an aquitard map representing the discontinuous surface structures. This approach enables one to account for such surfaces using the standard software package ArcGIS; therefore, it could be adopted in many practical applications.

  5. Prioritization of catchments based on soil erosion using remote sensing and GIS.

    Science.gov (United States)

    Khadse, Gajanan K; Vijay, Ritesh; Labhasetwar, Pawan K

    2015-06-01

    Water and soil are the most essential natural resources for socioeconomic development and sustenance of life. A study of soil and water dynamics at a watershed level facilitates a scientific approach towards their conservation and management. Remote sensing and Geographic Information System are tools that help to plan and manage natural resources on watershed basis. Studies were conducted for the formulation of catchment area treatment plan based on watershed prioritization with soil erosion studies using remote sensing techniques, corroborated with Geographic Information System (GIS), secondary data and ground truth information. Estimation of runoff and sediment yield is necessary in prioritization of catchment for the design of soil conservation structures and for identifying the critical erosion-prone areas of a catchment for implementation of best management plan with limited resources. The Universal Soil Loss Equation, Sediment Yield Determination and silt yield index methods are used for runoff and soil loss estimation for prioritization of the catchments. On the basis of soil erosion classes, the watersheds were grouped into very high, high, moderate and low priorities. High-priority watersheds need immediate attention for soil and water conservation, whereas low-priority watershed having good vegetative cover and low silt yield index may not need immediate attention for such treatments.

  6. Real-Time Implementation of a GIS-Based Localization System for Intelligent Vehicles

    Directory of Open Access Journals (Sweden)

    Philippe Bonnifait

    2007-07-01

    Full Text Available This paper presents a loosely coupled fusion approach that merges GPS data, dead-reckoned sensors, and GIS (geographical information system data. The GPS latency is compensated for by the DR sensors and the use of an xPPS signal. The fusion of the estimate with the map data is spatial-triggered, while the fusion with the GPS is time-triggered. We present a strategy that relies on pose tracking which is reinitialized when GPS data become incoherent. Particular attention is given to the representation of the road map and to the management of a cache memory for efficiency purposes. We report experiments carried out with our equipped car and a GIS whose characteristics are well adapted to embedded constraints.

  7. Real-Time Implementation of a GIS-Based Localization System for Intelligent Vehicles

    Directory of Open Access Journals (Sweden)

    Bonnifait Philippe

    2007-01-01

    Full Text Available This paper presents a loosely coupled fusion approach that merges GPS data, dead-reckoned sensors, and GIS (geographical information system data. The GPS latency is compensated for by the DR sensors and the use of an xPPS signal. The fusion of the estimate with the map data is spatial-triggered, while the fusion with the GPS is time-triggered. We present a strategy that relies on pose tracking which is reinitialized when GPS data become incoherent. Particular attention is given to the representation of the road map and to the management of a cache memory for efficiency purposes. We report experiments carried out with our equipped car and a GIS whose characteristics are well adapted to embedded constraints.

  8. Integration agent-based models and GIS as a virtual urban dynamic laboratory

    Science.gov (United States)

    Chen, Peng; Liu, Miaolong

    2007-06-01

    Based on the Agent-based Model and spatial data model, a tight-coupling integrating method of GIS and Agent-based Model (ABM) is to be discussed in this paper. The use of object-orientation for both spatial data and spatial process models facilitates their integration, which can allow exploration and explanation of spatial-temporal phenomena such as urban dynamic. In order to better understand how tight coupling might proceed and to evaluate the possible functional and efficiency gains from such a tight coupling, the agent-based model and spatial data model are discussed, and then the relationships affecting spatial data model and agent-based process models interaction. After that, a realistic crowd flow simulation experiment is presented. Using some tools provided by general GIS systems and a few specific programming languages, a new software system integrating GIS and MAS as a virtual laboratory applicable for simulating pedestrian flows in a crowd activity centre has been developed successfully. Under the environment supported by the software system, as an applicable case, a dynamic evolution process of the pedestrian's flows (dispersed process for the spectators) in a crowds' activity center - The Shanghai Stadium has been simulated successfully. At the end of the paper, some new research problems have been pointed out for the future.

  9. [Application of electronic fence technology based on GIS in Oncomelania hupensis snail monitoring].

    Science.gov (United States)

    Zhi-Hua, Chen; Yi-Sheng, Zhu; Zhi-Qiang, Xue; Xue-Bing, Li; Yi-Min, Ding; Li-Jun, Bi; Kai-Min, Gao; You, Zhang

    2017-07-27

    To study the application of Geographic Information System (GIS) electronic fence technique in Oncomelania hupensis snail monitoring. The electronic fence was set around the history and existing snail environments in the electronic map, the information about snail monitoring and controlling was linked to the electronic fence, and the snail monitoring information system was established on these bases. The monitoring information was input through the computer and smart phone. The electronic fence around the history and existing snail environments was set in the electronic map (Baidu map), and the snail monitoring information system and smart phone APP were established. The monitoring information was input and upload real-time, and the snail monitoring information was demonstrated in real time on Baidu map. By using the electronic fence technology based on GIS, the unique "environment electronic archives" for each snail monitoring environment can be established in the electronic map, and real-time, dynamic monitoring and visual management can be realized.

  10. Design of Mobile Operation and Maintenance System Based on Power GIS and GPS

    Directory of Open Access Journals (Sweden)

    Jing TAO

    2017-01-01

    Full Text Available In order to solve the low efficiency of operation and maintenance and the problems of management coordination caused by the coexistence of off-line operation and maintenance and multi system coexistence in current power telecommunication operation and maintenance, this paper proposes a mobile operation and maintenance system based on power GIS and GPS location technology. The system is based on the C/S architecture, and the mobile operation and maintenance terminal is connected with the operation and maintenance management terminal through wireless and wired network. In addition to meeting basic business requirements, the system integrates power GIS functions to visually demonstrate communication resources, personnel, and failures. The staff can use the wireless mobile terminal which integrated GPS module for to operate and maintain, and can locate accurately in real time.

  11. Integration of SRTM and TRMM date into the GIS-based hydrological model for the purpose of flood modelling

    Science.gov (United States)

    Akbari, A.; Abu Samah, A.; Othman, F.

    2012-04-01

    Due to land use and climate changes, more severe and frequent floods occur worldwide. Flood simulation as the first step in flood risk management can be robustly conducted with integration of GIS, RS and flood modeling tools. The primary goal of this research is to examine the practical use of public domain satellite data and GIS-based hydrologic model. Firstly, database development process is described. GIS tools and techniques were used in the light of relevant literature to achieve the appropriate database. Watershed delineation and parameterizations were carried out using cartographic DEM derived from digital topography at a scale of 1:25 000 with 30 m cell size and SRTM elevation data at 30 m cell size. The SRTM elevation dataset is evaluated and compared with cartographic DEM. With the assistance of statistical measures such as Correlation coefficient (r), Nash-Sutcliffe efficiency (NSE), Percent Bias (PBias) or Percent of Error (PE). According to NSE index, SRTM-DEM can be used for watershed delineation and parameterization with 87% similarity with Topo-DEM in a complex and underdeveloped terrains. Primary TRMM (V6) data was used as satellite based hytograph for rainfall-runoff simulation. The SCS-CN approach was used for losses and kinematic routing method employed for hydrograph transformation through the reaches. It is concluded that TRMM estimates do not give adequate information about the storms as it can be drawn from the rain gauges. Event-based flood modeling using HEC-HMS proved that SRTM elevation dataset has the ability to obviate the lack of terrain data for hydrologic modeling where appropriate data for terrain modeling and simulation of hydrological processes is unavailable. However, TRMM precipitation estimates failed to explain the behavior of rainfall events and its resultant peak discharge and time of peak.

  12. GIS based generation of dynamic hydrological and land patch simulation models for rural watershed areas

    Directory of Open Access Journals (Sweden)

    M. Varga

    2016-03-01

    Full Text Available This paper introduces a GIS based methodology to generate dynamic process model for the simulation based analysis of a sensitive rural watershed. The Direct Computer Mapping (DCM based solution starts from GIS layers and, via the graph interpretation and graphical edition of the process network, the expert interface is able to integrate the field experts’ knowledge in the computer aided generation of the simulation model. The methodology was applied and tested for the Southern catchment basin of Lake Balaton, Hungary. In the simplified hydrological model the GIS description of nine watercourses, 121 water sections, 57 small lakes and 20 Lake Balaton compartments were mapped through the expert interface to the dynamic databases of the DCM model. The hydrological model involved precipitation, evaporation, transpiration, runoff, infiltration. The COoRdination of INformation on the Environment (CORINE land cover based simplified “land patch” model considered the effect of meteorological and hydrological scenarios on freshwater resources in the land patches, rivers and lakes. The first results show that the applied model generation methodology helps to build complex models, which, after validation can support the analysis of various land use, with the consideration of environmental aspects.

  13. Application of GIS-based SCS-CN method in West Bank catchments, Palestine

    OpenAIRE

    Sameer Shadeed; Mohammad Almasri

    2010-01-01

    Among the most basic challenges of hydrology are the prediction and quantification of catchment surface runoff. The runoff curve number (CN) is a key factor in determining runoff in the SCS (Soil Conservation Service) based hydrologic modeling method. The traditional SCS-CN method for calculating the composite curve number is very tedious and consumes a major portion of the hydrologic modeling time. Therefore, geographic information systems (GIS) are now being used in combination with the SCS...

  14. Novel GIS approaches to watershed science and management: Description, prediction, and integration

    Science.gov (United States)

    Spatial data and geographic information systems (GIS) are playing an increasingly important role in watershed science and management, particularly in the face of increasing climate uncertainty and demand for water resources. Concomitantly, scientists and managers are presented wi...

  15. RISK VIP: Evaluation of Flood Risk on the French Railway Network Using an Innovative GIS Approach

    Directory of Open Access Journals (Sweden)

    Cheetham Mark

    2016-01-01

    Full Text Available Flooding can have significant direct and indirect negative effects on a railway network affecting both infrastructure and rail operations. Such impacts include the delaying or cancelling of train services, damage to railway structures or the implementation of costly maintenance and monitoring programs to ensure the safety and performance of the railway system. Identifying sections of railway line at risk from flooding allows appropriate actions to be targeted at specific areas and contributes to an effective asset management plan. Flooding of railway infrastructure can have numerous sources including surface water run-off, insufficient capacity of hydraulic structures or the inundation of embankments located in floodplains. Consequences of flooding include the destabilisation of structures (surface erosion of embankments or the undermining of bridge foundations, differential settlement of structures and damage to the track structure. This paper details an innovative approach developed at the SNCF using a Geographic Information System (GIS model to identify zones of the railway network at risk of different types of flooding. The GIS model RiskVIP has been constructed through the assessment of three distinct components of risk: “Vulnerability” (assessment of the susceptibility of the railway infrastructure to flood conditions, Intensity’ (capacity of a catchment to generate a flood flow, Probability’ (probability of a rainfall event.Through the application of decision trees, the component ‘Intensity’ has been characterised in the model by the physical properties of the catchment intercepted by the railway line (surface area of the catchment, slope and land cover characteristics and “Vulnerability” by the infrastructure itself (type, geometry and the presence of hydraulic structures. In order to evaluate its efficiency at identifying sites at risk of flooding, the model has been tested in the region of Languedoc-Roussillon in France

  16. Landslide susceptibility mapping using GIS-based statistical models and Remote sensing data in tropical environment.

    Science.gov (United States)

    Shahabi, Himan; Hashim, Mazlan

    2015-04-22

    This research presents the results of the GIS-based statistical models for generation of landslide susceptibility mapping using geographic information system (GIS) and remote-sensing data for Cameron Highlands area in Malaysia. Ten factors including slope, aspect, soil, lithology, NDVI, land cover, distance to drainage, precipitation, distance to fault, and distance to road were extracted from SAR data, SPOT 5 and WorldView-1 images. The relationships between the detected landslide locations and these ten related factors were identified by using GIS-based statistical models including analytical hierarchy process (AHP), weighted linear combination (WLC) and spatial multi-criteria evaluation (SMCE) models. The landslide inventory map which has a total of 92 landslide locations was created based on numerous resources such as digital aerial photographs, AIRSAR data, WorldView-1 images, and field surveys. Then, 80% of the landslide inventory was used for training the statistical models and the remaining 20% was used for validation purpose. The validation results using the Relative landslide density index (R-index) and Receiver operating characteristic (ROC) demonstrated that the SMCE model (accuracy is 96%) is better in prediction than AHP (accuracy is 91%) and WLC (accuracy is 89%) models. These landslide susceptibility maps would be useful for hazard mitigation purpose and regional planning.

  17. Agroforestry suitability analysis based upon nutrient availability mapping: a GIS based suitability mapping

    Directory of Open Access Journals (Sweden)

    Firoz Ahmad

    2017-05-01

    Full Text Available Agroforestry has drawn the attention of researchers due to its capacity to reduce the poverty and land degradation, improve food security and mitigate the climate change. However, the progress in promoting agroforestry is held back due to the lack of reliable data sets and appropriate tools to accurately map and to have an adequate decision making system for agroforestry modules. Agroforestry suitability being one special form of land suitability is very pertinent to study in the current times when there is tremendous pressure on the land as it is a limited commodity. The study aims for applying the geo-spatial tools towards visualizing various soil and environmental data to reveal the trends and interrelationships and to achieve a nutrient availability and agroforestry suitability map. Using weight matrix and ranks, individual maps were developed in ArcGIS 10.1 platform to generate nutrient availability map, which was later used to develop agroforestry suitability map. Watersheds were delineated using DEM in some part of the study area and were evaluated for prioritizing it and agroforestry suitability of the watersheds were also done as per the schematic flowchart. Agroforestry suitability regions were delineated based upon the weight and ranks by integrated mapping. The total open area was identified 42.4% out of which 21.6% area was found to have high suitability towards agroforestry. Within the watersheds, 22 village points were generated for creating buffers, which were further evaluated showing its proximity to high suitable agroforestry sites thus generating tremendous opportunity to the villagers to carry out agroforestry projects locally. This research shows the capability of remote sensing in studying agroforestry practices and in estimating the prominent factors for its optimal productivity. The ongoing agroforestry projects can be potentially diverted in the areas of high suitability as an extension. The use of ancillary data in GIS

  18. Integrated prediction based on GIS for sandstone-type uranium deposits in the northwest of Ordos Basin

    International Nuclear Information System (INIS)

    Han Shaoyang; Ke Dan; Hu Shuiqing; Guo Qingyin; Hou Huiqun

    2005-01-01

    The integrated prediction model of sandstone-type uranium deposits and its integrated evaluation methods as well as flow of the work based on GIS are studied. A software for extracting metallogenic information is also developed. A multi-source exploring information database is established in the northwest of Ordos Basin, and an integrated digital mineral deposit prospecting model of sandstone-type uranium deposits is designed based on GIS. The authors have completed metallogenic information extraction and integrated evaluation of sandstone-type uranium deposits based on GIS in the study area. Research results prove that the integrated prediction of sandstone-type uranium deposits based on GIS may further delineate prospective target areas rapidly and improve the predictive precision. (authors)

  19. Applying GIS and high performance agent-based simulation for managing an Old World Screwworm fly invasion of Australia.

    Science.gov (United States)

    Welch, M C; Kwan, P W; Sajeev, A S M

    2014-10-01

    Agent-based modelling has proven to be a promising approach for developing rich simulations for complex phenomena that provide decision support functions across a broad range of areas including biological, social and agricultural sciences. This paper demonstrates how high performance computing technologies, namely General-Purpose Computing on Graphics Processing Units (GPGPU), and commercial Geographic Information Systems (GIS) can be applied to develop a national scale, agent-based simulation of an incursion of Old World Screwworm fly (OWS fly) into the Australian mainland. The development of this simulation model leverages the combination of massively data-parallel processing capabilities supported by NVidia's Compute Unified Device Architecture (CUDA) and the advanced spatial visualisation capabilities of GIS. These technologies have enabled the implementation of an individual-based, stochastic lifecycle and dispersal algorithm for the OWS fly invasion. The simulation model draws upon a wide range of biological data as input to stochastically determine the reproduction and survival of the OWS fly through the different stages of its lifecycle and dispersal of gravid females. Through this model, a highly efficient computational platform has been developed for studying the effectiveness of control and mitigation strategies and their associated economic impact on livestock industries can be materialised. Copyright © 2014 International Atomic Energy Agency 2014. Published by Elsevier B.V. All rights reserved.

  20. GIS-based Geotechnical Microzonation Mapping using Analytic ...

    African Journals Online (AJOL)

    Bheema

    based ... of parameters that are important for different multivariate decision making ... The methodology used in this study is shown in the flow chart (Fig 4). .... layer was prepared by considering the highest elevations of the static water levels.

  1. Evaluating public ambulance service levels by applying a GIS based ...

    African Journals Online (AJOL)

    Hunadi Mokgalaka

    based analysis of ambulance response time was undertaken. The purpose was to .... He tested the travel time of the primary response vehicles and ..... Real CORP Proceedings / Tagungsband, ISBN: 978-3-9502139-7-3, pp, 22-25, viewed 18.

  2. A study on spatial decision support systems for HIV/AIDS prevention based on COM GIS technology

    Science.gov (United States)

    Yang, Kun; Luo, Huasong; Peng, Shungyun; Xu, Quanli

    2007-06-01

    Based on the deeply analysis of the current status and the existing problems of GIS technology applications in Epidemiology, this paper has proposed the method and process for establishing the spatial decision support systems of AIDS epidemic prevention by integrating the COM GIS, Spatial Database, GPS, Remote Sensing, and Communication technologies, as well as ASP and ActiveX software development technologies. One of the most important issues for constructing the spatial decision support systems of AIDS epidemic prevention is how to integrate the AIDS spreading models with GIS. The capabilities of GIS applications in the AIDS epidemic prevention have been described here in this paper firstly. Then some mature epidemic spreading models have also been discussed for extracting the computation parameters. Furthermore, a technical schema has been proposed for integrating the AIDS spreading models with GIS and relevant geospatial technologies, in which the GIS and model running platforms share a common spatial database and the computing results can be spatially visualized on Desktop or Web GIS clients. Finally, a complete solution for establishing the decision support systems of AIDS epidemic prevention has been offered in this paper based on the model integrating methods and ESRI COM GIS software packages. The general decision support systems are composed of data acquisition sub-systems, network communication sub-systems, model integrating sub-systems, AIDS epidemic information spatial database sub-systems, AIDS epidemic information querying and statistical analysis sub-systems, AIDS epidemic dynamic surveillance sub-systems, AIDS epidemic information spatial analysis and decision support sub-systems, as well as AIDS epidemic information publishing sub-systems based on Web GIS.

  3. Web-GIS approach for integrated analysis of heterogeneous georeferenced data

    Science.gov (United States)

    Okladnikov, Igor; Gordov, Evgeny; Titov, Alexander; Shulgina, Tamara

    2014-05-01

    Georeferenced datasets are currently actively used for modeling, interpretation and forecasting of climatic and ecosystem changes on different spatial and temporal scales [1]. Due to inherent heterogeneity of environmental datasets as well as their huge size (up to tens terabytes for a single dataset) a special software supporting studies in the climate and environmental change areas is required [2]. Dedicated information-computational system for integrated analysis of heterogeneous georeferenced climatological and meteorological data is presented. It is based on combination of Web and GIS technologies according to Open Geospatial Consortium (OGC) standards, and involves many modern solutions such as object-oriented programming model, modular composition, and JavaScript libraries based on GeoExt library (http://www.geoext.org), ExtJS Framework (http://www.sencha.com/products/extjs) and OpenLayers software (http://openlayers.org). The main advantage of the system lies in it's capability to perform integrated analysis of time series of georeferenced data obtained from different sources (in-situ observations, model results, remote sensing data) and to combine the results in a single map [3, 4] as WMS and WFS layers in a web-GIS application. Also analysis results are available for downloading as binary files from the graphical user interface or can be directly accessed through web mapping (WMS) and web feature (WFS) services for a further processing by the user. Data processing is performed on geographically distributed computational cluster comprising data storage systems and corresponding computational nodes. Several geophysical datasets represented by NCEP/NCAR Reanalysis II, JMA/CRIEPI JRA-25 Reanalysis, ECMWF ERA-40 Reanalysis, ECMWF ERA Interim Reanalysis, MRI/JMA APHRODITE's Water Resources Project Reanalysis, DWD Global Precipitation Climatology Centre's data, GMAO Modern Era-Retrospective analysis for Research and Applications, reanalysis of Monitoring

  4. [Ecological environmental quality assessment of Hangzhou urban area based on RS and GIS].

    Science.gov (United States)

    Xu, Pengwei; Zhao, Duo

    2006-06-01

    In allusion to the shortage of traditional ecological environmental quality assessment, this paper studied the spatial distribution of assessing factors at a mid-small scale, and the conversion of integer character to girding assessing cells. The main assessing factors including natural environmental condition, environmental quality, natural landscape and urbanization pressure, which were classified into four types with about eleven assessing factors, were selected from RS images and GIS-spatial analyzing environmental quality vector graph. Based on GIS, a comprehensive assessment model for the ecological environmental quality in Hangzhou urban area was established. In comparison with observed urban heat island effects, the assessment results were in good agreement with the ecological environmental quality in the urban area of Hangzhou.

  5. Social Toponymy of Urban Ecotourism to Inventory Potential Tourism in Dolly Based on WebGIS

    Science.gov (United States)

    Sukojo, B. M.; Asri, A. K.; Swastyastu, C. A.

    2017-12-01

    Before closed, Dolly is the largest localization area in Southeast Asia, located in Surabaya, East Java. After closing in 2014, to change Dolly into a region that has a positive image, the government of Surabaya City plans to develop Dolly becomes an Urban Ecotourism area. To support the program, various training activities have been conducted. In addition to, Dolly development is also encouraging the development of supporting facilities such as an information system that can describe the new Dolly. Knowing this issue, it is necessary to conduct a social toponymy survey that can support the availability of geospatial information. The method used in this research is field surveying and interview based on toponymy. The concept of standardization is verified the elements that have been standardized, propose that not have been standardized, and identify the potential of Dolly. The results of toponymy survey were analyzed using four geographic approaches (onomastics, spatial, ecological, and geographic) to determine the description of the area, naming criteria, and existing tourism potential. In addition to these four approaches, to describe how potential development of Urban Ecotourism in Dolly, also used qualitative-descriptive analysis techniques. The results of this research, in addition to information about history and gazetteer, also presented information about Urban Ecotourism in Dolly. From the identification, it is known that there are some villages in Dolly that have been developed into tourist areas with various characteristics, such as: “Kampung Orumi” which is famous with seaweed drink, “Kampung Samijali” with Samiler crackers, “Kampung Batik” with the design of Jarak and Semanggi Leaves Typical of Surabaya, and “Kampung Telur Asin” with various food made from salted eggs. And in the end, to present information about Dolly, in this research will also be built WebGIS of Dolly Ecotourism.

  6. Application of GIS-based SCS-CN method in West Bank catchments, Palestine

    Directory of Open Access Journals (Sweden)

    Sameer Shadeed

    2010-03-01

    Full Text Available Among the most basic challenges of hydrology are the prediction and quantification of catchment surface runoff. The runoff curve number (CN is a key factor in determining runoff in the SCS (Soil Conservation Service based hydrologic modeling method. The traditional SCS-CN method for calculating the composite curve number is very tedious and consumes a major portion of the hydrologic modeling time. Therefore, geographic information systems (GIS are now being used in combination with the SCS-CN method. This paper assesses the modeling of flow in West Bank catchments using the GIS-based SCS-CN method. The West Bank, Palestine, is characterized as an arid to semi-arid region with annual rainfall depths ranging between 100 mm in the vicinity of the Jordan River to 700 mm in the mountains extending across the central parts of the region. The estimated composite curve number for the entire West Bank is about 50 assuming dry conditions. This paper clearly demonstrates that the integration of GIS with the SCS-CN method provides a powerful tool for estimating runoff volumes in West Bank catchments, representing arid to semi-arid catchments of Palestine.

  7. GIS-based modelling of odour emitted from the waste processing plant: case study

    Directory of Open Access Journals (Sweden)

    Sόwka Izabela

    2017-01-01

    Full Text Available The emission of odours into the atmospheric air from the municipal economy and industrial plants, especially in urbanized areas, causes a serious problem, which the mankind has been struggling with for years. The excessive exposure of people to odours may result in many negative health effects, including, for example, headaches and vomiting. There are many different methods that are used in order to evaluate the odour nuisance. The results obtained through those methods can then be used to carry out a visualization and an analysis of a distribution of the odour concentrations in a given area by using the GIS (Geographic Information System. By their application to the spatial analysis of the impact of odours, we can enable the assessment of the magnitude and likelihood of the occurrence of odour nuisance. Modelling using GIS tools and spatial interpolation like IDW method and kriging can provide an alternative to the standard modelling tools, which generally use the emission values from sources that are identified as major emitters of odours. The work presents the result, based on the odour measurements data from waste processing plant, of the attempt to connect two different tools – the reference model OPERAT FB and GIS-based dispersion modelling performed using IDW method and ordinary kriging to analyse their behaviour in terms of limited observation values.

  8. Research on evaluation of degree of complexity of mining fault network based on GIS

    Energy Technology Data Exchange (ETDEWEB)

    Hua Zhang; Yun-jia Wang; Chuan-zhi Liu [China University of Mining and Technology, Jiangsu (China). School of Environment Science and Spatial Informatics

    2007-03-15

    A large number of spatial and attribute data are involved in coal resource evaluation. Databases are a relatively advanced data management technology, but their major defects are the poor graphic and spatial data functions, from which it is difficult to realize scientific management of evaluation data with spatial characteristics and evaluation result maps. On account of these deficiencies, the evaluation of degree of complexity of mining fault network based on a geographic information system (GIS) is proposed which integrates management of spatial and attribute data. A fractal is an index which can reflect the comprehensive information of faults' number, density, size, composition and dynamics mechanism. A fractal dimension is used as the quantitative evaluation index. Evaluation software has been developed based on a component GIS-MapX, with which the degree of complexity of fault network is evaluated quantitatively using the quantitative index of fractal dimensions in Liuqiao No.2 coal mine as an example. Results show that it is effective in acquiring model parameters and enhancing the definition of data and evaluation results with the application of GIS technology. The fault network is a system with fractal structure and its complexity can be described reasonably and accurately by fractal dimension, which provides an effective method for coal resource evaluation. 9 refs., 6 figs., 2 tabs.

  9. Gis-Based Multi-Criteria Decision Analysis for Forest Fire Risk Mapping

    Science.gov (United States)

    Akay, A. E.; Erdoğan, A.

    2017-11-01

    The forested areas along the coastal zone of the Mediterranean region in Turkey are classified as first-degree fire sensitive areas. Forest fires are major environmental disaster that affects the sustainability of forest ecosystems. Besides, forest fires result in important economic losses and even threaten human lives. Thus, it is critical to determine the forested areas with fire risks and thereby minimize the damages on forest resources by taking necessary precaution measures in these areas. The risk of forest fire can be assessed based on various factors such as forest vegetation structures (tree species, crown closure, tree stage), topographic features (slope and aspect), and climatic parameters (temperature, wind). In this study, GIS-based Multi-Criteria Decision Analysis (MCDA) method was used to generate forest fire risk map. The study was implemented in the forested areas within Yayla Forest Enterprise Chiefs at Dursunbey Forest Enterprise Directorate which is classified as first degree fire sensitive area. In the solution process, "extAhp 2.0" plug-in running Analytic Hierarchy Process (AHP) method in ArcGIS 10.4.1 was used to categorize study area under five fire risk classes: extreme risk, high risk, moderate risk, and low risk. The results indicated that 23.81 % of the area was of extreme risk, while 25.81 % was of high risk. The result indicated that the most effective criterion was tree species, followed by tree stages. The aspect had the least effective criterion on forest fire risk. It was revealed that GIS techniques integrated with MCDA methods are effective tools to quickly estimate forest fire risk at low cost. The integration of these factors into GIS can be very useful to determine forested areas with high fire risk and also to plan forestry management after fire.

  10. GIS based analysis of future district heating potential in Denmark

    DEFF Research Database (Denmark)

    Nielsen, Steffen; Möller, Bernd

    2013-01-01

    in Denmark have been mapped in a heat atlas which includes all buildings and their heat demands. This article focuses on developing a method for assessing the costs associated with supplying these buildings with DH. The analysis is based on the existing DH areas in Denmark. By finding the heat production...

  11. GIS-Based Detection of Gullies in Terrestrial LiDAR Data of the Cerro Llamoca Peatland (Peru

    Directory of Open Access Journals (Sweden)

    Markus Forbriger

    2013-11-01

    Full Text Available Cushion peatlands are typical features of the high altitude Andes in South America. Due to the adaptation to difficult environmental conditions, they are very fragile ecosystems and therefore vulnerable to environmental and climate changes. Peatland erosion has severe effects on their ecological functions, such as water storage capacity. Thus, erosion monitoring is highly advisable. Erosion quantification and monitoring can be supported by high-resolution terrestrial Light Detection and Ranging (LiDAR. In this study, a novel Geographic Information System (GIS-based method for the automatic delineation and geomorphometric description of gullies in cushion peatlands is presented. The approach is a multi-step workflow based on a gully edge extraction and a sink filling algorithm applied to a conditioned digital terrain model. Our method enables the creation of GIS-ready polygons of the gullies and the derivation of geomorphometric parameters along the entire channel course. Automatically derived boundaries and gully area values correspond to a high degree (93% with manually digitized reference polygons. The set of methods developed in this study offers a suitable tool for the monitoring and scientific analysis of fluvial morphology in cushion peatlands.

  12. An Updating System for the Gridded Population Database of China Based on Remote Sensing, GIS and Spatial Database Technologies

    Science.gov (United States)

    Yang, Xiaohuan; Huang, Yaohuan; Dong, Pinliang; Jiang, Dong; Liu, Honghui

    2009-01-01

    The spatial distribution of population is closely related to land use and land cover (LULC) patterns on both regional and global scales. Population can be redistributed onto geo-referenced square grids according to this relation. In the past decades, various approaches to monitoring LULC using remote sensing and Geographic Information Systems (GIS) have been developed, which makes it possible for efficient updating of geo-referenced population data. A Spatial Population Updating System (SPUS) is developed for updating the gridded population database of China based on remote sensing, GIS and spatial database technologies, with a spatial resolution of 1 km by 1 km. The SPUS can process standard Moderate Resolution Imaging Spectroradiometer (MODIS L1B) data integrated with a Pattern Decomposition Method (PDM) and an LULC-Conversion Model to obtain patterns of land use and land cover, and provide input parameters for a Population Spatialization Model (PSM). The PSM embedded in SPUS is used for generating 1 km by 1 km gridded population data in each population distribution region based on natural and socio-economic variables. Validation results from finer township-level census data of Yishui County suggest that the gridded population database produced by the SPUS is reliable. PMID:22399959

  13. MEASURING LAND USES ACCESSIBILITY BY USING FUZZY MAJORITY GIS-BASED MULTICRITERIA DECISION ANALYSIS CASE STUDY: MALAYER CITY

    Directory of Open Access Journals (Sweden)

    A. Taravat

    2014-10-01

    Full Text Available Public spaces accessibility has become one of the important factors in urban planning. Therefore, considerable attention has been given to measure accessibility to public spaces on the UK, US and Canada, but there are few studies outside the anglophone world especially in developing countries such as Iran. In this study an attempt has been made to measure objective accessibility to public spaces (parks, school, library and administrative using fuzzy majority GIS-based multicriteria decision analysis. This method is for defining the priority for distribution of urban facilities and utilities as the first step towards elimination of social justice. In order to test and demonstrate the presented model, the comprehensive plan of Malayer city has been considered for ranking in three objectives and properties in view of index per capital (Green space, sport facilities and major cultural centers like library and access index. The results can be used to inform the local planning process and the GIS approach can be expanded into other local authority domains. The results shows that the distribution of facilities in Malayer city has followed on the base of cost benefit law and the human aspect of resource allocation programming of facilities (from centre to suburbs of the city.

  14. An Updating System for the Gridded Population Database of China Based on Remote Sensing, GIS and Spatial Database Technologies

    Directory of Open Access Journals (Sweden)

    Xiaohuan Yang

    2009-02-01

    Full Text Available The spatial distribution of population is closely related to land use and land cover (LULC patterns on both regional and global scales. Population can be redistributed onto geo-referenced square grids according to this relation. In the past decades, various approaches to monitoring LULC using remote sensing and Geographic Information Systems (GIS have been developed, which makes it possible for efficient updating of geo-referenced population data. A Spatial Population Updating System (SPUS is developed for updating the gridded population database of China based on remote sensing, GIS and spatial database technologies, with a spatial resolution of 1 km by 1 km. The SPUS can process standard Moderate Resolution Imaging Spectroradiometer (MODIS L1B data integrated with a Pattern Decomposition Method (PDM and an LULC-Conversion Model to obtain patterns of land use and land cover, and provide input parameters for a Population Spatialization Model (PSM. The PSM embedded in SPUS is used for generating 1 km by 1 km gridded population data in each population distribution region based on natural and socio-economic variables. Validation results from finer township-level census data of Yishui County suggest that the gridded population database produced by the SPUS is reliable.

  15. Measuring Land Uses Accessibility by Using Fuzzy Majority Gis-Based Multicriteria Decision Analysis Case Study: Malayer City

    Science.gov (United States)

    Taravat, A.; Yari, A.; Rajaei, M.; Mousavian, R.

    2014-10-01

    Public spaces accessibility has become one of the important factors in urban planning. Therefore, considerable attention has been given to measure accessibility to public spaces on the UK, US and Canada, but there are few studies outside the anglophone world especially in developing countries such as Iran. In this study an attempt has been made to measure objective accessibility to public spaces (parks, school, library and administrative) using fuzzy majority GIS-based multicriteria decision analysis. This method is for defining the priority for distribution of urban facilities and utilities as the first step towards elimination of social justice. In order to test and demonstrate the presented model, the comprehensive plan of Malayer city has been considered for ranking in three objectives and properties in view of index per capital (Green space, sport facilities and major cultural centers like library and access index). The results can be used to inform the local planning process and the GIS approach can be expanded into other local authority domains. The results shows that the distribution of facilities in Malayer city has followed on the base of cost benefit law and the human aspect of resource allocation programming of facilities (from centre to suburbs of the city).

  16. Impact assessment of proposed ski areas: A GIS approach integrating biological, physical and landscape indicators

    International Nuclear Information System (INIS)

    Geneletti, Davide

    2008-01-01

    Ski centres are characterized by significant environmental impacts that occur during both the construction and the operation phase. In Trentino, a well-known ski destination located in northern Italy, new ski areas were identified by planning tools without conducting a formal assessment of their effects on the environment. This paper presents a study to assess and compare the impacts of the proposed ski areas within two valleys strongly linked to winter tourism: the Fiemme and Fassa Valleys. The method is based on the computation of spatial indicators using a Geographical Information System (GIS) to predict and quantify critical impacts, such as ecosystem loss and fragmentation, soil erosion, geomorphologic hazards, interference with flora and fauna, and visibility. Subsequently, multicriteria analysis was applied to generate composite indices, and to rank ski areas according to their overall suitability. Finally, sensitivity analyses allowed to test the stability of the results. The study concluded that two of the proposed ski areas are located in highly unsuitable environment, and the relevant plan provisions should be revised

  17. [Early warning for various internal faults of GIS based on ultraviolet spectroscopy].

    Science.gov (United States)

    Zhao, Yu; Wang, Xian-pei; Hu, Hong-hong; Dai, Dang-dang; Long, Jia-chuan; Tian, Meng; Zhu, Guo-wei; Huang, Yun-guang

    2015-02-01

    As the basis of accurate diagnosis, fault early-warning of gas insulation switchgear (GIS) focuses on the time-effectiveness and the applicability. It would be significant to research the method of unified early-warning for partial discharge (PD) and overheated faults in GIS. In the present paper, SO2 is proposed as the common and typical by-product. The unified monitoring could be achieved through ultraviolet spectroscopy (UV) detection of SO2. The derivative method and Savitzky-Golay filtering are employed for baseline correction and smoothing. The wavelength range of 290-310 nm is selected for quantitative detection of SO2. Through UV method, the spectral interference of SF6 and other complex by-products, e.g., SOF2 and SOF2, can be avoided and the features of trace SO2 in GIS can be extracted. The detection system is featured by compacted structure, low maintenance and satisfactory suitability in filed surveillance. By conducting SF6 decomposition experiments, including two types of PD faults and the overheated faults between 200-400 degrees C, the feasibility of proposed UV method has been verified. Fourier transform infrared spectroscopy and gas chromatography methods can be used for subsequent fault diagnosis. The different decomposition features in two kinds of faults are confirmed and the diagnosis strategy has been briefly analyzed. The main by-products under PD are SOF2 and SO2F2. The generated SO2 is significantly less than SOF2. More carbonous by-products will be generated when PD involves epoxy. By contrast, when the material of heater is stainless steel, SF6 decomposes at about 300 "C and the main by-products in overheated faults are SO2 and SO2F2. When heated over 350 degrees C, SO2 is generated much faster. SOz content stably increases when the GIS fault lasts. The faults types could be preliminarily identified based on the generation features of SO2.

  18. [Wetland landscape pattern change based on GIS and RS: a review].

    Science.gov (United States)

    Kong, Fan-Ting; Xi, Min; Li, Yue; Kong, Fan-Long; Chen, Wan

    2013-04-01

    Wetland is an ecological landscape with most biodiversity in nature, which has unique ecological structure and function, and contains abundant natural resources to provide material guarantee for human's living and development. Wetland landscape pattern is the comprehensive result of various ecological processes, and has become a hot issue in wetland ecological study. At present, the combination of geographic information system (GIS) and remote sensing (RS) technologies is an important way to study the wetland landscape pattern change. This paper reviewed the research progress in the wetland landscape change based on GIS and RS from the aspects of the research methods of wetland landscape pattern, index of wetland landscape pattern, and driving forces of wetland landscape pattern evolution, and discussed the applications of the combination of GIS and RS in monitoring the wetland landscape pattern change, the index selection of wetland landscape pattern, and the driving mechanisms of the combined action of human and nature. Some deficiencies in the current studies were put forward, and the directions of the future-studies were prospected.

  19. GIS-based examination of peats and soils in Surfers Paradise, Australia

    Directory of Open Access Journals (Sweden)

    Al-Ani Haider

    2014-03-01

    Full Text Available The subsoil conditions of Surfers Paradise in Southeast Queensland of Australia have been examined in terms of soil stiffness by using geographic information system (GIS. Peat is a highly organic and compressible material. Surfers Paradise (as a study area has problematic peat layer due to its high water content, high compressibility, and low shear strength. This layer has various thicknesses at different locations ranging between R.L. . 10 to R.L. -19.6 m. Buildings in Surfers Paradise are using piled foundations to avoid the high compressibility and low shear strength peat layer. Spatial Analyst extension in the GIS ArcMap10 has been utilised to develop zonation maps for different depths in the study area. Each depth has been interpolated as a surface to create Standard Penetration Test SPT-N value GIS-based zonation maps for each depth. In addition, 8 interpolation techniques have been examined to evaluate which technique gives better representation for the Standard Penetration Test (SPT data. Inverse Distance weighing (IDW method in Spatial Analyst extension gives better representation for the utilised data with certain parameters. Two different cross sections have been performed in the core of the study area to determine the extent and the depth of the peat layer underneath already erected buildings. Physical and engineering properties of the Surfers Paradise peat have been obtained and showed that this peat falls within the category of tropical peat.

  20. Analysis Of Educational Services Distribution-Based Geographic Information System GIS

    Directory of Open Access Journals (Sweden)

    Waleed Lagrab

    2015-03-01

    Full Text Available Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facilities in Mukalla districts in YEMEN which contributed to building a geographic database for the study area. After that the Kindergarten spatial patterns are analyzed in terms of proximity to each other and used near some other land in the surrounding area such as streets highways factories etc. Also measures the concentration dispersion clustering and distribution direction for the kindergarten this study showed the effectiveness of the GIS for spatial data analysis. One of the most important finding that most of the Kindergarten was established in Mukalla city did not take into account the criteria that set by the authorities. Furthermore almost district suffers from a shortage in the number of kindergarten and pattern of distribution of those kindergartens dominated by spatial dispersed.

  1. Study on Method of Geohazard Change Detection Based on Integrating Remote Sensing and GIS

    International Nuclear Information System (INIS)

    Zhao, Zhenzhen; Yan, Qin; Liu, Zhengjun; Luo, Chengfeng

    2014-01-01

    Following a comprehensive literature review, this paper looks at analysis of geohazard using remote sensing information. This paper compares the basic types and methods of change detection, explores the basic principle of common methods and makes an respective analysis of the characteristics and shortcomings of the commonly used methods in the application of geohazard. Using the earthquake in JieGu as a case study, this paper proposes a geohazard change detection method integrating RS and GIS. When detecting the pre-earthquake and post-earthquake remote sensing images at different phases, it is crucial to set an appropriate threshold. The method adopts a self-adapting determination algorithm for threshold. We select a training region which is obtained after pixel information comparison and set a threshold value. The threshold value separates the changed pixel maximum. Then we apply the threshold value to the entire image, which could also make change detection accuracy maximum. Finally, we output the result to the GIS system to make change analysis. The experimental results show that this method of geohazard change detection based on integrating remote sensing and GIS information has higher accuracy with obvious advantages compared with the traditional methods

  2. Assessment of Wave Energy in the South China Sea Based on GIS Technology

    Directory of Open Access Journals (Sweden)

    Gang Lin

    2017-01-01

    Full Text Available China is now the world’s largest user of coal and also has the highest greenhouse gas emissions associated with the mining and use of coal. Under today’s enormous pressures of the growing shortage of conventional energy sources and the need for emission reductions, the search for clean energy is the most effective strategy to address the energy crisis and global warming. This study utilized satellite remote sensing technology, geographic information system (GIS technology, and simulated wave data for the South China Sea. The characteristic features of the wave energy were obtained by analysis through the wave resource assessment formula and the results were stored in a GIS database. Software for the evaluation of wave energy in the South China Sea was written. The results should provide accurate, efficient references for wave energy researchers and decision-makers. Based on a 24-year WW3 model simulation wave data and GIS technology, this study presented the characteristic of the wave energy in the SCS; results demonstrated that the SCS has the feasibility and viability for wave energy farming.

  3. Design and implementation of information visualization system on science and technology industry based on GIS

    Science.gov (United States)

    Wu, Xiaofang; Jiang, Liushi

    2011-02-01

    Usually in the traditional science and technology information system, the only text and table form are used to manage the data, and the mathematic statistics method is applied to analyze the data. It lacks for the spatial analysis and management of data. Therefore, GIS technology is introduced to visualize and analyze the information data on science and technology industry. Firstly, by using the developed platform-microsoft visual studio 2005 and ArcGIS Engine, the information visualization system on science and technology industry based on GIS is built up, which implements various functions, such as data storage and management, inquiry, statistics, chart analysis, thematic map representation. It can show the change of science and technology information from the space and time axis intuitively. Then, the data of science and technology in Guangdong province are taken as experimental data and are applied to the system. And by considering the factors of humanities, geography and economics so on, the situation and change tendency of science and technology information of different regions are analyzed and researched, and the corresponding suggestion and method are brought forward in order to provide the auxiliary support for development of science and technology industry in Guangdong province.

  4. Assessment of bioenergy potential in Sicily: A GIS-based support methodology

    International Nuclear Information System (INIS)

    Beccali, Marco; D'Alberti, Vincenzo; Franzitta, Vincenzo; Columba, Pietro

    2009-01-01

    A Geographical Information System (GIS) supported methodology has been developed in order to assess the technical and economic potential of biomass exploitation for energy production in Sicily. The methodology was based on the use of agricultural, economic, climatic, and infrastructural data in a GIS. Data about land use, transportation facilities, urban cartography, regional territorial planning, terrain digital model, lithology, climatic types, and civil and industrial users have been stored in the GIS to define potential areas for gathering the residues coming from the pruning of olive groves, vineyards, and other agricultural crops, and to assess biomass available for energy cultivation. Further, it was possible to assess the potential of biodiesel production, supposing the cultivation of rapeseed in arable crop areas. For the biomass used for direct combustion purposes, the economic availability has been assessed assuming a price of the biomass and comparing it with other fuels. This assessment has shown the strong competitiveness of firewood in comparison with traditional fossil fuels when the collection system is implemented in an efficient way. Moreover, the economic potential of biodiesel was assessed considering the on-going financial regime for fuel. At the same time, the study has shown a significant competitiveness of the finished biomass (pellets), and good potential for a long-term development of this market. An important result was the determination of biofuel production potential in Sicily. An outcome of the study was to show the opportunities stemming from the harmonisation of Energy Policy with the Waste Management System and Rural Development Plan. (author)

  5. An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest.

    Science.gov (United States)

    Suh, Jangwon; Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

    2017-11-27

    In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further.

  6. An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

    Science.gov (United States)

    Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

    2017-01-01

    In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further. PMID:29186922

  7. An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

    Directory of Open Access Journals (Sweden)

    Jangwon Suh

    2017-11-01

    Full Text Available In this study, current geographic information system (GIS-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further.

  8. Towards evidence-based, GIS-driven national spatial health information infrastructure and surveillance services in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Boulos Maged

    2004-01-01

    Full Text Available Abstract The term "Geographic Information Systems" (GIS has been added to MeSH in 2003, a step reflecting the importance and growing use of GIS in health and healthcare research and practices. GIS have much more to offer than the obvious digital cartography (map functions. From a community health perspective, GIS could potentially act as powerful evidence-based practice tools for early problem detection and solving. When properly used, GIS can: inform and educate (professionals and the public; empower decision-making at all levels; help in planning and tweaking clinically and cost-effective actions, in predicting outcomes before making any financial commitments and ascribing priorities in a climate of finite resources; change practices; and continually monitor and analyse changes, as well as sentinel events. Yet despite all these potentials for GIS, they remain under-utilised in the UK National Health Service (NHS. This paper has the following objectives: (1 to illustrate with practical, real-world scenarios and examples from the literature the different GIS methods and uses to improve community health and healthcare practices, e.g., for improving hospital bed availability, in community health and bioterrorism surveillance services, and in the latest SARS outbreak; (2 to discuss challenges and problems currently hindering the wide-scale adoption of GIS across the NHS; and (3 to identify the most important requirements and ingredients for addressing these challenges, and realising GIS potential within the NHS, guided by related initiatives worldwide. The ultimate goal is to illuminate the road towards implementing a comprehensive national, multi-agency spatio-temporal health information infrastructure functioning proactively in real time. The concepts and principles presented in this paper can be also applied in other countries, and on regional (e.g., European Union and global levels.

  9. An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

    OpenAIRE

    Suh, Jangwon; Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

    2017-01-01

    In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or t...

  10. Verification of a GIS-based system for identification of potential hydro power plant sites in Uganda

    OpenAIRE

    Gimbo, Florence

    2015-01-01

    Hydropower makes and is expected to continue to make a significant contribution to meeting the electricity demand in many countries. The information on hydropower potential is many places is often incomplete. A GIS based tool is under development is expected to help in quickly identifying possible hydropower plant locations over a large area in a short time. This study is aimed at evaluating how well this GIS tool is able to estimate the hydropower potential from the runoff maps and terrain/e...

  11. Optimization of Urban Highway Bypass Horizontal Alignment: A Methodological Overview of Intelligent Spatial MCDA Approach Using Fuzzy AHP and GIS

    Directory of Open Access Journals (Sweden)

    Yashon O. Ouma

    2014-01-01

    Full Text Available Selection of urban bypass highway alternatives involves the consideration of competing and conflicting criteria and factors, which require multicriteria decision analysis. Analytic hierarchy process (AHP is one of the most commonly used multicriteria decision making (MCDM methods that can integrate personal preferences in performing spatial analyses on the physical and nonphysical parameters. In this paper, the traditional AHP is modified to fuzzy AHP for the determination of the optimal bypass route for Eldoret town in Kenya. The fuzzy AHP is proposed in order to take care of the vagueness type uncertainty encountered in alternative bypass location determination. In the implementation, both engineering and environmental factors comprising of physical and socioeconomic objectives were considered at different levels of decision hierarchy. The results showed that the physical objectives (elevation, slope, soils, geology, and drainage networks and socioeconomic objectives (land-use and road networks contributed the same weight of 0.5 towards the bypass location prioritization process. At the subcriteria evaluation level, land-use and existing road networks contributed the highest significance of 47.3% amongst the seven decision factors. Integrated with GIS-based least cost path (LCP analysis, the fuzzy AHP results produced the most desirable and optimal route alignment, as compared to the AHP only prioritization approach.

  12. Large scale debris-flow hazard assessment: a geotechnical approach and GIS modelling

    Directory of Open Access Journals (Sweden)

    G. Delmonaco

    2003-01-01

    Full Text Available A deterministic distributed model has been developed for large-scale debris-flow hazard analysis in the basin of River Vezza (Tuscany Region – Italy. This area (51.6 km 2 was affected by over 250 landslides. These were classified as debris/earth flow mainly involving the metamorphic geological formations outcropping in the area, triggered by the pluviometric event of 19 June 1996. In the last decades landslide hazard and risk analysis have been favoured by the development of GIS techniques permitting the generalisation, synthesis and modelling of stability conditions on a large scale investigation (>1:10 000. In this work, the main results derived by the application of a geotechnical model coupled with a hydrological model for the assessment of debris flows hazard analysis, are reported. This analysis has been developed starting by the following steps: landslide inventory map derived by aerial photo interpretation, direct field survey, generation of a database and digital maps, elaboration of a DTM and derived themes (i.e. slope angle map, definition of a superficial soil thickness map, geotechnical soil characterisation through implementation of a backanalysis on test slopes, laboratory test analysis, inference of the influence of precipitation, for distinct return times, on ponding time and pore pressure generation, implementation of a slope stability model (infinite slope model and generalisation of the safety factor for estimated rainfall events with different return times. Such an approach has allowed the identification of potential source areas of debris flow triggering. This is used to detected precipitation events with estimated return time of 10, 50, 75 and 100 years. The model shows a dramatic decrease of safety conditions for the simulation when is related to a 75 years return time rainfall event. It corresponds to an estimated cumulated daily intensity of 280–330 mm. This value can be considered the hydrological triggering

  13. Application of GIS based data driven evidential belief function model to predict groundwater potential zonation

    Science.gov (United States)

    Nampak, Haleh; Pradhan, Biswajeet; Manap, Mohammad Abd

    2014-05-01

    The objective of this paper is to exploit potential application of an evidential belief function (EBF) model for spatial prediction of groundwater productivity at Langat basin area, Malaysia using geographic information system (GIS) technique. About 125 groundwater yield data were collected from well locations. Subsequently, the groundwater yield was divided into high (⩾11 m3/h) and low yields (divided into a testing dataset 70% (42 wells) for training the model and the remaining 30% (18 wells) was used for validation purpose. To perform cross validation, the frequency ratio (FR) approach was applied into remaining groundwater wells with low yield to show the spatial correlation between the low potential zones of groundwater productivity. A total of twelve groundwater conditioning factors that affect the storage of groundwater occurrences were derived from various data sources such as satellite based imagery, topographic maps and associated database. Those twelve groundwater conditioning factors are elevation, slope, curvature, stream power index (SPI), topographic wetness index (TWI), drainage density, lithology, lineament density, land use, normalized difference vegetation index (NDVI), soil and rainfall. Subsequently, the Dempster-Shafer theory of evidence model was applied to prepare the groundwater potential map. Finally, the result of groundwater potential map derived from belief map was validated using testing data. Furthermore, to compare the performance of the EBF result, logistic regression model was applied. The success-rate and prediction-rate curves were computed to estimate the efficiency of the employed EBF model compared to LR method. The validation results demonstrated that the success-rate for EBF and LR methods were 83% and 82% respectively. The area under the curve for prediction-rate of EBF and LR methods were calculated 78% and 72% respectively. The outputs achieved from the current research proved the efficiency of EBF in groundwater

  14. Fair fund distribution for a municipal incinerator using GIS-based fuzzy analytic hierarchy process.

    Science.gov (United States)

    Chang, Ni-Bin; Chang, Ying-Hsi; Chen, Ho-Wen

    2009-01-01

    Burning municipal solid waste (MSW) can generate energy and reduce the waste volume, which delivers benefits to society through resources conservation. But current practices by society are not sustainable because the associated environmental impacts of waste incineration on urbanized regions have been a long-standing concern in local communities. Public reluctance with regard to accepting the incinerators as typical utilities often results in an intensive debate concerning how much welfare is lost for those residents living in the vicinity of those incinerators. As the measure of welfare change with respect to environmental quality constraints nearby these incinerators remains critical, new arguments related to how to allocate the fair fund among affected communities became a focal point in environmental management. Given the fact that most County fair fund rules allow a great deal of flexibility for redistribution, little is known about what type of methodology may be a good fit to determine the distribution of such a fair fund under uncertainty. This paper purports to demonstrate a system-based approach that helps any fair fund distribution, which is made with respect to residents' possible claim for fair damages due to the installation of a new incinerator. Holding a case study using integrated geographic information system (GIS) and fuzzy analytic hierarchy process (FAHP) for finding out the most appropriate distribution strategy between two neighboring towns in Taipei County, Taiwan demonstrates the application potential. Participants in determining the use of a fair fund also follow a highly democratic procedure where all stakeholders involved eventually express a high level of satisfaction with the results facilitating the final decision making process. It ensures that plans for the distribution of such a fair fund were carefully thought out and justified with a multi-faceted nature that covers political, socio-economic, technical, environmental, public

  15. CyberGIS software: a synthetic review and integration roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Shaowen [University of Illinois, Urbana-Champaign; Anselin, Luc [Arizona State University; Bhaduri, Budhendra L [ORNL; Cosby, Christopher [University Navstar Consortium, Boulder, CO; Goodchild, Michael [University of California, Santa Barbara; Liu, Yan [University of Illinois, Urbana-Champaign; Nygers, Timothy L. [University of Washington, Seattle

    2013-01-01

    CyberGIS defined as cyberinfrastructure-based geographic information systems (GIS) has emerged as a new generation of GIS representing an important research direction for both cyberinfrastructure and geographic information science. This study introduces a 5-year effort funded by the US National Science Foundation to advance the science and applications of CyberGIS, particularly for enabling the analysis of big spatial data, computationally intensive spatial analysis and modeling (SAM), and collaborative geospatial problem-solving and decision-making, simultaneously conducted by a large number of users. Several fundamental research questions are raised and addressed while a set of CyberGIS challenges and opportunities are identified from scientific perspectives. The study reviews several key CyberGIS software tools that are used to elucidate a vision and roadmap for CyberGIS software research. The roadmap focuses on software integration and synthesis of cyberinfrastructure, GIS, and SAM by defining several key integration dimensions and strategies. CyberGIS, based on this holistic integration roadmap, exhibits the following key characteristics: high-performance and scalable, open and distributed, collaborative, service-oriented, user-centric, and community-driven. As a major result of the roadmap, two key CyberGIS modalities gateway and toolkit combined with a community-driven and participatory approach have laid a solid foundation to achieve scientific breakthroughs across many geospatial communities that would be otherwise impossible.

  16. Modelling a suitable location for Urban Solid Waste Management using AHP method and GIS -A geospatial approach and MCDM Model

    Science.gov (United States)

    Iqbal, M.; Islam, A.; Hossain, A.; Mustaque, S.

    2016-12-01

    Multi-Criteria Decision Making(MCDM) is advanced analytical method to evaluate appropriate result or decision from multiple criterion environment. Present time in advanced research, MCDM technique is progressive analytical process to evaluate a logical decision from various conflict. In addition, Present day Geospatial approach (e.g. Remote sensing and GIS) also another advanced technical approach in a research to collect, process and analyze various spatial data at a time. GIS and Remote sensing together with the MCDM technique could be the best platform to solve a complex decision making process. These two latest process combined very effectively used in site selection for solid waste management in urban policy. The most popular MCDM technique is Weighted Linear Method (WLC) where Analytical Hierarchy Process (AHP) is another popular and consistent techniques used in worldwide as dependable decision making. Consequently, the main objective of this study is improving a AHP model as MCDM technique with Geographic Information System (GIS) to select a suitable landfill site for urban solid waste management. Here AHP technique used as a MCDM tool to select the best suitable landfill location for urban solid waste management. To protect the urban environment in a sustainable way municipal waste needs an appropriate landfill site considering environmental, geological, social and technical aspect of the region. A MCDM model generate from five class related which related to environmental, geological, social and technical using AHP method and input the result set in GIS for final model location for urban solid waste management. The final suitable location comes out that 12.2% of the area corresponds to 22.89 km2 considering the total study area. In this study, Keraniganj sub-district of Dhaka district in Bangladesh is consider as study area which is densely populated city currently undergoes an unmanaged waste management system especially the suitable landfill sites for

  17. Planning for Heritage Preservation in Western Turkey: A GIS Approach to Archaeotourism and Agricultural Policy

    Directory of Open Access Journals (Sweden)

    Curtis, Caitlin

    2012-04-01

    Full Text Available In the Marmara Lake basin, western Turkey, the burial mounds of Bin Tepe are constantly threatened by looting, development, and agricultural expansion. This study outlines a Geographic Information Systems (GIS methodology used to plan for a solution to preservation through archaeotourism development and agricultural policy compromise in the region. The components of this study include determining how to best take advantage of the scenic view of the mounds for tourism, projecting the potential future visual impact of growing olive trees, and developing a plan to mitigate this impact with unplanted zones. Fieldwork in 2011 both confirmed and furthered GIS analyses.

  18. Landslides and vegetation cover in the 2005 North Pakistan earthquake: a GIS and statistical quantitative approach

    Directory of Open Access Journals (Sweden)

    P. Peduzzi

    2010-04-01

    Full Text Available The growing concern for loss of services once provided by natural ecosystems is getting increasing attention. However, the accelerating rate of natural resources destruction calls for rapid and global action. With often very limited budgets, environmental agencies and NGOs need cost-efficient ways to quickly convince decision-makers that sound management of natural resources can help to protect human lives and their welfare. The methodology described in this paper, is based on geospatial and statistical analysis, involving simple Geographical Information System (GIS and remote sensing algorithms. It is based on free or very low-cost data. It aims to scientifically assess the potential role of vegetation in mitigating landslides triggered by earthquakes by normalising for other factors such as slopes and distance from active fault. The methodology was applied to the 2005 North Pakistan/India earthquake which generated a large number of victims and hundreds of landslides. The study shows that if slopes and proximity from active fault are the main susceptibility factors for post landslides triggered by earthquakes in this area, the results clearly revealed that areas covered by denser vegetation suffered less and smaller landslides than areas with thinner (or devoid of vegetation cover. Short distance from roads/trails and rivers also proved to be pertinent factors in increasing landslides susceptibility. This project is a component of a wider initiative involving the Global Resource Information Database Europe from the United Nations Environment Programme, the International Union for Conservation of Nature, the Institute of Geomatics and Risk Analysis from the University of Lausanne and the "institut universitaire d'études du développement" from the University of Geneva.

  19. Automatic recognition of seismic intensity based on RS and GIS: a case study in Wenchuan Ms8.0 earthquake of China.

    Science.gov (United States)

    Zhang, Qiuwen; Zhang, Yan; Yang, Xiaohong; Su, Bin

    2014-01-01

    In recent years, earthquakes have frequently occurred all over the world, which caused huge casualties and economic losses. It is very necessary and urgent to obtain the seismic intensity map timely so as to master the distribution of the disaster and provide supports for quick earthquake relief. Compared with traditional methods of drawing seismic intensity map, which require many investigations in the field of earthquake area or are too dependent on the empirical formulas, spatial information technologies such as Remote Sensing (RS) and Geographical Information System (GIS) can provide fast and economical way to automatically recognize the seismic intensity. With the integrated application of RS and GIS, this paper proposes a RS/GIS-based approach for automatic recognition of seismic intensity, in which RS is used to retrieve and extract the information on damages caused by earthquake, and GIS is applied to manage and display the data of seismic intensity. The case study in Wenchuan Ms8.0 earthquake in China shows that the information on seismic intensity can be automatically extracted from remotely sensed images as quickly as possible after earthquake occurrence, and the Digital Intensity Model (DIM) can be used to visually query and display the distribution of seismic intensity.

  20. Automatic Recognition of Seismic Intensity Based on RS and GIS: A Case Study in Wenchuan Ms8.0 Earthquake of China

    Directory of Open Access Journals (Sweden)

    Qiuwen Zhang

    2014-01-01

    Full Text Available In recent years, earthquakes have frequently occurred all over the world, which caused huge casualties and economic losses. It is very necessary and urgent to obtain the seismic intensity map timely so as to master the distribution of the disaster and provide supports for quick earthquake relief. Compared with traditional methods of drawing seismic intensity map, which require many investigations in the field of earthquake area or are too dependent on the empirical formulas, spatial information technologies such as Remote Sensing (RS and Geographical Information System (GIS can provide fast and economical way to automatically recognize the seismic intensity. With the integrated application of RS and GIS, this paper proposes a RS/GIS-based approach for automatic recognition of seismic intensity, in which RS is used to retrieve and extract the information on damages caused by earthquake, and GIS is applied to manage and display the data of seismic intensity. The case study in Wenchuan Ms8.0 earthquake in China shows that the information on seismic intensity can be automatically extracted from remotely sensed images as quickly as possible after earthquake occurrence, and the Digital Intensity Model (DIM can be used to visually query and display the distribution of seismic intensity.

  1. Incorporating variations in pesticide catabolic activity into a GIS-based groundwater risk assessment

    International Nuclear Information System (INIS)

    Posen, Paulette; Lovett, Andrew; Hiscock, Kevin; Evers, Sarah; Ward, Rob; Reid, Brian

    2006-01-01

    The catabolic activity of incumbent microorganisms in soil samples of eleven dissimilar soil series was investigated, with respect to the herbicide isoproturon. Soils were collected from a 30 x 37 km area of river catchment to the north-west of London, England. Catabolic activity in each soil type during a 500 h assay was determined by 14 C-radiorespirometry. Results showed four soils that exhibited high levels of catabolic activity (33-44% mineralisation) while the remaining seven soils showed lower levels of catabolic activity (12-16% mineralisation). There was evidence to suggest that soils exhibiting high catabolic activity had low ( 14 C-radiorespirometric results were used to produce a GIS layer representing levels of catabolic activity for the dissimilar soils across the study area. This layer was combined with other GIS layers relating to pesticide attenuation, including soil organic carbon content, depth to groundwater and hydrogeology, to produce a map showing risk of groundwater contamination by isoproturon. The output from this approach was compared with output from an attenuation-only approach and differences appraised. Inclusion of the catabolism layer resulted in a lowering of risk in the model in 15% of the study area. Although there appears to be limited benefit in including pesticide catabolic activity in this regional-scale groundwater risk model, this type of addition could be useful in a site-specific risk assessment

  2. Remote sensing and GIS approach for water-well site selection, southwest Iran

    Science.gov (United States)

    Rangzan, K.; Charchi, A.; Abshirini, E.; Dinger, J.

    2008-01-01

    The Pabdeh-Lali Anticline of northern Khuzestan province is located in southwestern Iran and occupies 790 km2. This structure is situated in the Zagros folded belt. As a result of well-developed karst systems in the anticlinal axis, the water supply potential is high and is drained by many peripheral springs. However, there is a scarcity of water for agriculture and population centers on the anticlinal flanks, which imposes a severe problem in terms of area development. This study combines remotely sensed (RS) data and a geographical information system (GIS) into a RSGIS technique to delineate new areas for groundwater development and specific sites for drilling productive water wells. Toward these goals, RS data were used to develop GIS layers for lithology, structural geology, topographic slope, elevation, and drainage density. Field measurements were made to create spring-location and groundwater-quality GIS layers. Subsequently, expert choice and relational methods were used in a GIS environment to conjunctively analyze all layers to delineate preferable regions and 43 individual sites in which to drill water wells. Results indicate that the most preferred areas are, in preferential order, within recent alluvial deposits, the Bakhtiyari Conglomerates, and the Aghajari Sandstone. The Asmari Limestone and other units have much lower potential for groundwater supplies. Potential usefulness of the RSGIS method was indicated when six out of nine producing wells recently drilled by the Khozestan Water and Power Authority (which had no knowledge of this study) were located in areas preferentially selected by this technique.

  3. Sustainable transport planning using GIS and remote sensing: an integrated approach

    Science.gov (United States)

    Giorgoudis, Marios D.; Hadjimitsis, Diofantos G.; Shiftan, Yoram

    2014-08-01

    The main advantage of using GIS is its ability to access and analyze spatially distributed data. The applications of GIS to transportation can be viewed as involving either on data retrieval; data integrator; or data analysis. The use of remote sensing can assist the retrieval of land use changes. Indeed, the integration of GIS and remote sensing will be used to fill the gap in the smart transport planning. A four step research is going to be done in order to try to integrate the usage of GIS and remote sensing to sustainable transport planning. The proposed research will be held in the city of Limassol, Cyprus. The data that are going to be used are data that are going to be collected through questionnaires, and other available data from the Cyprus Public Works Department and from the Remote Sensing Laboratory and Geo-Environment Research Lab of the Cyprus University of Technology. Overall, statistical analysis and market segmentation of data will be done, the land usage will be examined, and a scenario building on mode choice will be held. This paper presents an overview of the methodology that will be adopted.

  4. Challenges in Visualizing Satellite Level 2 Atmospheric Data with GIS approach

    Science.gov (United States)

    Wei, J. C.; Yang, W.; Zhao, P.; Pham, L.; Meyer, D. J.

    2017-12-01

    Satellite data products are important for a wide variety of applications that can bring far-reaching benefits to the science community and the broader society. These benefits can best be achieved if the satellite data are well utilized and interpreted. Unfortunately, this is not always the case, despite the abundance and relative maturity of numerous satellite data products provided by NASA and other organizations. One way to help users better understand the satellite data is to provide data along with `Images', including accurate pixel coverage area delineation, and science team recommended quality screening for individual geophysical parameters. However, there are challenges of visualizing remote sensed non-gridded products: (1) different geodetics of space-borne instruments (2) data often arranged in "along-track" and "across-track" axes (3) spatially and temporally continuous data chunked into granule files: data for a portion (or all) of a satellite orbit (4) no general rule of resampling or interpolations to a grid (5) geophysical retrieval only based on pixel center location without shape information. In this presentation, we will unravel a new Goddard Earth Sciences Data and Information Services Center (GES DISC) Level 2 (L2) visualization on-demand service. The service's front end provides various visualization and data accessing capabilities, such as overlay and swipe of multiply variables and subset and download of data in different formats. The backend of the service consists of Open Geospatial Consortium (OGC) standard-compliant Web Mapping Service (WMS) and Web Coverage Service. The infrastructure allows inclusion of outside data sources served in OGC compliant protocols and allows other interoperable clients, such as ArcGIS clients, to connect to our L2 WCS/WMS.

  5. First level seismic microzonation map of Chennai city – a GIS approach

    Directory of Open Access Journals (Sweden)

    G. P. Ganapathy

    2011-02-01

    Full Text Available Chennai city is the fourth largest metropolis in India, is the focus of economic, social and cultural development and it is the capital of the State of Tamil Nadu. The city has a multi-dimensional growth in development of its infrastructures and population. The area of Chennai has experienced moderate earthquakes in the historical past. Also the Bureau of Indian Standard upgraded the seismic status of Chennai from Low Seismic Hazard (Zone II to Moderate Seismic Hazard (Zone III–(BIS: 1893 (2001. In this connection, a first level seismic microzonation map of Chennai city has been produced with a GIS platform using the themes, viz, Peak Ground Acceleration (PGA, Shear wave velocity at 3 m, Geology, Ground water fluctuation and bed rock depth. The near potential seismic sources were identified from the remote-sensing study and seismo-tectonic details from published literatures. The peak ground acceleration for these seismic sources were estimated based on the attenuation relationship and the maximum PGA for Chennai is 0.176 g. The groundwater fluctuation of the city varies from 0–4 m below ground level. The depth to bedrock configuration shows trough and ridges in the bedrock topography all over the city. The seismic microzonation analysis involved grid datasets (the discrete datasets from different themes were converted to grids to compute the final seismic hazard grid through integration and weightage analysis of the source themes. The Chennai city has been classified into three broad zones, viz, High, Moderate and Low Seismic Hazard. The High seismic Hazard concentrated in a few places in the western central part of the city. The moderate hazard areas are oriented in NW-SE direction in the Western part. The southern and eastern part will have low seismic hazard. The result of the study may be used as first-hand information in selecting the appropriate earthquake resistant features in designing the forthcoming new buildings against seismic

  6. Facilitating Spatial Thinking in World Geography Using Web-Based GIS

    Science.gov (United States)

    Jo, Injeong; Hong, Jung Eun; Verma, Kanika

    2016-01-01

    Advocates for geographic information system (GIS) education contend that learning about GIS promotes students' spatial thinking. Empirical studies are still needed to elucidate the potential of GIS as an instructional tool to support spatial thinking in other geography courses. Using a non-equivalent control group research design, this study…

  7. The Use of GIS for the Application of the Phenomenological Approach to the Seismic Risk Analysis: the Case of the Italian Fortified Architecture

    Science.gov (United States)

    Lenticchia, E.; Coïsson, E.

    2017-05-01

    The present paper proposes the use of GIS for the application of the so-called phenomenological approach to the analysis of the seismic behaviour of historical buildings. This approach is based on the awareness that the different masonry building typologies are characterized by different, recurring vulnerabilities. Thus, the observation and classification of the real damage is seen as the first step for recognizing and classifying these vulnerabilities, in order to plan focused preventive interventions. For these purposes, the GIS has proven to be a powerful instrument to collect and manage this type of information on a large number of cases. This paper specifically focuses on the application of the phenomenological approach to the analysis of the seismic behaviour of fortified buildings, including castles, fortresses, citadels, and all the typical historical constructions characterized by the presence of massive towers and defensive walls. The main earthquakes which struck Italy in the last 40 years (up to the recent Central Italy seismic swarm) were taken into consideration and described by means of shake maps. A previously published work has been continued with the addition of new data and some improvements, including a specific symbology for the description of building typologies and conservation status on the maps, the indications of damage levels and the comparison between shake maps in terms of pga and in terms of pseudo-acceleration. The increase in knowledge obtained and the broader frame given by the analysis of the data are here directed to the primary aim of cultural heritage preservation.

  8. THE USE OF GIS FOR THE APPLICATION OF THE PHENOMENOLOGICAL APPROACH TO THE SEISMIC RISK ANALYSIS: THE CASE OF THE ITALIAN FORTIFIED ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    E. Lenticchia

    2017-05-01

    Full Text Available The present paper proposes the use of GIS for the application of the so-called phenomenological approach to the analysis of the seismic behaviour of historical buildings. This approach is based on the awareness that the different masonry building typologies are characterized by different, recurring vulnerabilities. Thus, the observation and classification of the real damage is seen as the first step for recognizing and classifying these vulnerabilities, in order to plan focused preventive interventions. For these purposes, the GIS has proven to be a powerful instrument to collect and manage this type of information on a large number of cases. This paper specifically focuses on the application of the phenomenological approach to the analysis of the seismic behaviour of fortified buildings, including castles, fortresses, citadels, and all the typical historical constructions characterized by the presence of massive towers and defensive walls. The main earthquakes which struck Italy in the last 40 years (up to the recent Central Italy seismic swarm were taken into consideration and described by means of shake maps. A previously published work has been continued with the addition of new data and some improvements, including a specific symbology for the description of building typologies and conservation status on the maps, the indications of damage levels and the comparison between shake maps in terms of pga and in terms of pseudo-acceleration. The increase in knowledge obtained and the broader frame given by the analysis of the data are here directed to the primary aim of cultural heritage preservation.

  9. A GIS tool for the economic assessment of renewable technologies

    International Nuclear Information System (INIS)

    Mahmmud, F.; Woods, J.; Watson, S.; Halliday, J.; Hossain, J.

    1997-01-01

    A Geographical Information System (GIS) has the potential to analyse a large area for the optimum selection and siting of renewable energy systems. This paper reports on a GIS based scheme for the economic assessment of a selected number of wind and photovoltaic systems in the state of Karnataka, in India. This involved the implementation of an appropriate GIS methodology. The preparation of the GIS database is often the most arduous task in GIS operations. Thus, a description of the GIS methodology and the preparation of the database for the analysis of a selection of wind and photovoltaic systems is given. This approach has enabled the identification of the high potential areas in terms of the levelised electricity costs. An overall assessment of the region for present and future scenarios is also given. (author)

  10. [Research on suitable distribution of Paris yunnanensis based on remote sensing and GIS].

    Science.gov (United States)

    Luo, Yao; Dong, Yong-Bo; Zhu, Cong; Peng, Wen-Fu; Fang, Qing-Mao; Xu, Xin-Liang

    2017-11-01

    Paris yunnanensis is a kind of rare medicinal herb, having a very high medicinal value. Studying its suitable ecological condition can provide a basis for its rational exploitation, artificial cultivation, and sustainable utilization. A practicable method in this paper has been proposed to research the suitable regional distribution of P. yunnanensis in Sichuan province. By the case study of P. yunnanensis in Sichuan province, and according to related literatures, the suitable ecological condition of P. yunnanensis such as altitude, mean annual temperature (MAT), annual precipitation, regional slope, slope ranges, vegetative cover, and soil types was analyzed following remote sensing (RS) and GIS.The appropriate distribution regionof P. yunnanensis and its area were extracted based on RS and GIS technology,combing with the information of the field validation data. The results showed that the concentrated distribution regions in counties of Sichuan province were, Liangshan prefecture, Aba prefecture, Sertar county of Ganzi prefecture, Panzhihua city, Ya'an city, Chengdu city, Meishan city, Leshan city, Yibin city, Neijiang city, Luzhou city, Bazhong city, Nanchong city, Guangyuan city and other cities and counties area.The suitable distribution area in Sichuan is about 7 338 km², accounting for 3.02% of the total study regional area. The analysis result has high consistency with the filed validation data, and the research method for P. yunnanensis distribution region based onspatial overlay analysis and the extracted the information of land usage and ecological factors following the RS and GIS is reliable. Copyright© by the Chinese Pharmaceutical Association.

  11. Research of Ancient Architectures in Jin-Fen Area Based on GIS&BIM Technology

    Science.gov (United States)

    Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

    2017-05-01

    The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation & restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching & collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS&BIM technology, could be constructed to support the

  12. Research of Ancient Architectures in Jin-Fen Area Based on GIS and BIM Technology

    International Nuclear Information System (INIS)

    Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

    2017-01-01

    The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation and restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching and collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS and BIM technology, could be constructed to support

  13. Monitoring of dams according to German standard DIN 19 700 on the basis of a GIS based expert system; Stauanlagenueberwachung nach DIN 19 700 in Verbindung mit Expertensystemen auf GIS-Basis

    Energy Technology Data Exchange (ETDEWEB)

    Kast, Karl; Saucke, Ulrich; Elsaesser, Ralph [Dr.-Ing. Karl Kast + Partner (GbR) Ingenieurgemeinschaft fuer Umwelt- und Geotechnik, Ettlingen (Germany)

    2010-07-01

    The German standard DIN 19 700 stipulates regular safety reports assessing dams and their operation as part of the continuous dam monitoring scheme. Experience has shown that a GIS based dam monitoring system exhibits evident advantages regarding a continuous assessment. Besides and easy access to all relevant information grouped by themes, it offers a graphic analysis of measuring data and their display in the GIS system. In addition, concerning relevant failure mechanism, individual modules of a GIS based expert system are designed for the purpose of assessing the safety of the dam in the event of uncommon incidents. (orig.)

  14. INFLUENCE OF USUAL AND DUAL WHEELS ON SOIL PENETRATION RESISTANCE: THE GIS-APPROACH

    Directory of Open Access Journals (Sweden)

    Zhukov A. V.

    2015-12-01

    Full Text Available GIS-APPROACH application has allowed establishing that usual wheels of machine-tractor units carry out considerable influence on soil which exceeds visible borders of a track of wheels on the dimensions. This influence shows in augmentation of soil penetration resistance at 100-155 % in comparison with the control on depth of 0-10 cm and on 20-30 % on depth of 45-50 %. It is impossible to exclude that influence of wheels proceeds more deeply, than tests have been conducted. Critical for cultivated plants value of soil penetration resistance in 3 MPa under the influence of usual wheels of agricultural machinery comes nearer practically to a surface. Character of profile changes of hardness in various regions influences of wheels allows assuming the long season of a relaxation of soil for achievement of background values of soil penetration resistance. The further researches are necessary for an establishment of concrete indicators of dynamics. Negative influence of an overstocking does not confine only deterioration of conditions of growth of assemblages of rootlets of plants. Infringement of processes of moving of moisture in the soil, the accelerated evaporation and the slowed down processes of a filtration and an infiltration, destruction of modular frame, activization of erosive processes is possible. The understanding of these processes will give the chance volume understanding of real influence of running systems of machine-tractor devices on bedrock. Region intensive influence of dual wheels is circumscribed by the top soil layers (0-15 cm. The major feature of influence of dual wheels is absence of an overstocking above critical levels. It is impossible to exclude possible positive influence of moderate inspissations of soil under the influence of dual wheels for growth of agricultural crops and moisture conservation in soil. The cumulative negative effect on soil crossed vehicles traces is probable. The long season of a relaxation of

  15. DEVELOPING GIS-BASED DEMAND-RESPONSIVE TRANSIT SYSTEM IN TEHRAN CITY

    Directory of Open Access Journals (Sweden)

    H. Faroqi

    2015-12-01

    Full Text Available Create, maintain and development of public transport network in metropolitan are important problems in the field of urban transport management. In public transport, maximize the efficient use of public fleet capacity has been considered. Concepts and technologies of GIS have provided suitable way for management and optimization of the public transports systems. In demand-responsive public transportation system, firstly fellow traveller groups have been established for applicants based on spatial concepts and tools of GIS, second for each group according to its’ members and their paths, a public vehicle has been allocated to them then based on dynamic routing, the fellow passenger group has been gathered from their origins and has been moved to their destinations through optimal route. The suggested system has been implemented based on network data and commuting trips statistics of 1 to 6 districts in Tehran city. Evaluation performed on the results show the 34% increase using of Taxi capacity, 13% increase using of Van capacity and 10% increase using of Bus capacity in comparison between current public transport system and suggested public transportation system has been improved.

  16. Neighborhood-based PA and its environmental correlates: a GIS- and GPS based cross-sectional study in the Netherlands

    OpenAIRE

    Jansen, Marijke; Kamphuis, Carlijn B. M.; Pierik, Frank H.; Ettema, Dick F.; Dijst, Martin J.

    2018-01-01

    Background To improve our understanding of the neighborhood environment – physical activity (PA) relationship, it is of importance to assess associations between neighborhood environmental characteristics and neighborhood-based PA. Methods Participants’ (N = 308; 45–65 years) light PA (LPA) and moderate-vigorous PA (MVPA) within a 400, 800, and 1600 m buffer around adults’ homes was measured using accelerometers and GPS-devices. Land use data in ArcGIS provided neighborhood characteristics fo...

  17. Utilizing mobile technology in GIS education: A case study of using iPad and iBooks in fieldwork and location based exercises

    Science.gov (United States)

    Chuang, Yi-Ting

    The advancement of mobile computing technology has provided diverse way for education. Combination of mobile devices and GIS tools has become a trend in many geospatial technology applications (i.e., Google Maps application on smartphones). This research aims to develop an iBook prototype (a GIS textbook) for GIS education on Apple iPads and to evaluate the effectiveness of adopting the GIS iBook in classes and fieldwork exercises. We conducted the evaluation tests in two GIS courses (GEOG104 and GEOG381) in Fall 2014 at San Diego State University. There are two main research questions in this study: (1) How to assess and evaluate the effectiveness of location-based learning exercises (from iBook) and fieldwork exercises for first-time GIS students? (2) What were major technical challenges and opportunities to utilize mobile device and mobile technology in GIS education? The procedures of developing and evaluating the prototype of the GIS iBook include creating two new chapters (chapter three: Wander the World through Remote Sensing Data and chapter four: Internet and Mobile GIS), interviewing five educators from high schools and community colleges, and improving the contents of the GIS iBook after the interview. There were 31 students who tested the GIS iBook and did a fieldwork exercise with iPads. The 31 students were required to finish five questionnaires after the exercise to express their user experiences and thoughts about the GIS iBook. Based on the result of questionnaires, most students preferred to take GIS classes with the free GIS iBook and thought fieldwork exercise can help their learning. The students also performed better in knowledge oriented survey after reading the GIS iBook. This research also adopts the SWOT analysis method to evaluate the prototype of the GIS iBook. The result of the SWOT analysis indicates that utilizing mobile device in GIS education does have a great potential value in enhancing student's understanding. The strengths of

  18. A simplified gis-based model for large wood recruitment and connectivity in mountain basins

    Science.gov (United States)

    Franceschi, Silvia; Antonello, Andrea; Vela, Ana Lucia; Cavalli, Marco; Crema, Stefano; Comiti, Francesco; Tonon, Giustino

    2015-04-01

    During the last 50 years in the Alps the decline of the rural and forest economy and at the depopulation of the mountain areas caused the progressive abandon of the land in general and in particular of the riparian zones and the consequent increment of the vegetation extension. On one hand the wood increases the availability of organic matter and has positive effects on mountain river systems. However, during flooding events large woods that reach the stream cause the clogging of bridges with an increase of flood hazard. The approach to the evaluation of the availability of large wood during flooding events is still a challenge. There are models that simulate the propagation of the logs downstream, but the evaluation of the trees that can reach the stream is still done using simplified GIS procedures. These procedures are the base for our research which will include LiDAR derived information on vegetation to evaluate large wood recruitment extreme events. Within the last Google Summer of Code (2014) we developed a set of tools to evaluate large wood recruitment and propagation along the channel network based on a simplified methodology for monitoring and modeling large wood recruitment and transport in mountain basins implemented by Lucía et 2014. These tools are integrated in the JGrassTools project as a dedicated section in the Hydro-Geomorphology library. The section LWRecruitment contains 10 simple modules that allow the user to start from very simple information related to geomorphology, flooding areas and vegetation cover and obtain a map of the most probable critical sections on the streams. The tools cover the two main aspects related to the iteration of large wood with the rivers: the recruitment mechanisms and the propagation downstream. While the propagation tool is very simple and does not consider the hydrodynamic of the problem, the recruitment algorithms are more specific and consider the influence of hillslopes stability and the flooding extension

  19. Non point source pollution modelling in the watershed managed by Integrated Conctructed Wetlands: A GIS approach.

    OpenAIRE

    Vyavahare, Nilesh

    2008-01-01

    The non-point source pollution has been recognised as main cause of eutrophication in Ireland (EPA Ireland, 2001). Integrated Constructed Wetland (ICW) is a management practice adopted in Annestown stream watershed, located in the south county of Waterford in Ireland, used to cleanse farmyard runoff. Present study forms the annual pollution budget for the Annestown stream watershed. The amount of pollution from non-point sources flowing into the stream was simulated by using GIS techniques; u...

  20. A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping.

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

    2014-12-01

    Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having "very high susceptibility", with the further 31% falling into zones classified as having "high susceptibility".

  1. GIS-based biomass resource utilization for rice straw cofiring in the Taiwanese power market

    International Nuclear Information System (INIS)

    Hu, Ming-Che; Huang, An-Lei; Wen, Tzai-Hung

    2013-01-01

    Rice straw, a rich agricultural byproduct in Taiwan, can be used as biomass feedstock for cofiring systems. In this study, we analyzed the penetration of rice straw cofiring systems in the Taiwanese power market. In the power generation system, rice straw is cofired with fossil fuel in existing electricity plants. The benefits of cofiring systems include increasing the use of renewable energy, decreasing the fuel cost, and lowering greenhouse gas emissions. We established a linear complementarity model to simulate the power market equilibrium with cofiring systems in Taiwan. GIS-based analysis was then used to analyze the geospatial relationships between paddy rice farms and power plants to assess potential biomass for straw-power generation. Additionally, a sensitivity analysis of the biomass feedstock supply system was conducted for various cofiring scenarios. The spatial maps and equilibrium results of rice straw cofiring in Taiwanese power market are presented in the paper. - Highlights: ► The penetration of straw cofiring systems in the power market is analyzed. ► GIS-based analysis assesses potential straw-power generation. ► The spatial maps and equilibrium results of rice straw cofiring are presented

  2. A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

    2014-01-01

    Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having “very high susceptibility”, with the further 31% falling into zones classified as having “high susceptibility”. PMID:26089577

  3. Energy management based on AM/FM/GIS for phase balancing application on distribution systems

    International Nuclear Information System (INIS)

    Kuo, C.-C.; Chao, Y.-T.

    2010-01-01

    Unbalanced feeder systems may deteriorate of power quality, and increase investment and operating costs for distribution systems. The phase swapping method recommends re-phasing circuits of laterals and transformers for making the current and voltage balanced and also reducing feeder loss and voltage drop. In this paper, an application program, based on the automated mapping/facilities management/ geographic information system (AM/FM/GIS) is developed which contains a function of automatically computing Z-bus, load flow and phase balancing of feeders with phase swapping by using easily selecting of feeder on a graphic user interface application. Therefore, the relative data need not be keyed in manually. The presented phase balancing algorithm are based on database and related data structures developed on the AM/FM/GIS and Visual Basic software, which can be integrated into the Tai-Power distribution automation system. Then, the phase balancing algorithm is designed to handle the load patterns and the load of transformers that connect specific feeders when evaluating phase swaps that will result in reduced daily circuit losses over all load points. The proposed application not only can effectively reduce the circuit loss and improves phase balancing, but also enhances power quality efficiently under easily using environment.

  4. Analysis of sea use landscape pattern based on GIS: a case study in Huludao, China.

    Science.gov (United States)

    Suo, Anning; Wang, Chen; Zhang, Minghui

    2016-01-01

    This study aims to analyse sea use landscape patterns on a regional scale based on methods of landscape ecology integrated with sea use spatial characteristics. Several landscape-level analysis indices, such as the dominance index, complex index, intensivity index, diversity index and sea congruency index, were established using Geographic Information System (GIS) and applied in Huludao, China. The results indicated that sea use landscape analysis indices, which were created based on the characteristics of sea use spatial patterns using GIS, are suitable to quantitatively describe the landscape patterns of sea use. They are operable tools for the landscape analysis of sea use. The sea use landscape in Huludao was dominated by fishing use with a landscape dominance index of 0.724. The sea use landscape is a complex mosaic with high diversity and plenty of fishing areas, as shown by the landscape complex index of 27.21 and the landscape diversity index of 1.25. Most sea use patches correspond to the marine functional zonation plan and the sea use congruency index is 0.89 in the fishing zone and 0.92 in the transportation zone.

  5. GIS-based rare events logistic regression for mineral prospectivity mapping

    Science.gov (United States)

    Xiong, Yihui; Zuo, Renguang

    2018-02-01

    Mineralization is a special type of singularity event, and can be considered as a rare event, because within a specific study area the number of prospective locations (1s) are considerably fewer than the number of non-prospective locations (0s). In this study, GIS-based rare events logistic regression (RELR) was used to map the mineral prospectivity in the southwestern Fujian Province, China. An odds ratio was used to measure the relative importance of the evidence variables with respect to mineralization. The results suggest that formations, granites, and skarn alterations, followed by faults and aeromagnetic anomaly are the most important indicators for the formation of Fe-related mineralization in the study area. The prediction rate and the area under the curve (AUC) values show that areas with higher probability have a strong spatial relationship with the known mineral deposits. Comparing the results with original logistic regression (OLR) demonstrates that the GIS-based RELR performs better than OLR. The prospectivity map obtained in this study benefits the search for skarn Fe-related mineralization in the study area.

  6. Interaction between GIS and hydrologic model: A preliminary approach using ArcHydro Framework Data Model

    Directory of Open Access Journals (Sweden)

    Silvio Jorge C. Simões

    2013-08-01

    Full Text Available In different regions of Brazil, population growth and economic development can degrade water quality, compromising watershed health and human supply. Because of its ability to combine spatial and temporal data in the same environment and to create water resources management (WRM models, the Geographical Information System (GIS is a powerful tool for managing water resources, preventing floods and estimating water supply. This paper discusses the integration between GIS and hydrological models and presents a case study relating to the upper section of the Paraíba do Sul Basin (Sao Paulo State portion, situated in the Southeast of Brazil. The case study presented in this paper has a database suitable for the basin’s dimensions, including digitized topographic maps at a 50,000 scale. From an ArcGIS®/ArcHydro Framework Data Model, a geometric network was created to produce different raster products. This first grid derived from the digital elevation model grid (DEM is the flow direction map followed by flow accumulation, stream and catchment maps. The next steps in this research are to include the different multipurpose reservoirs situated along the Paraíba do Sul River and to incorporate rainfall time series data in ArcHydro to build a hydrologic data model within a GIS environment in order to produce a comprehensive spatial temporal model.

  7. An approach to 3D model fusion in GIS systems and its application in a future ECDIS

    Science.gov (United States)

    Liu, Tao; Zhao, Depeng; Pan, Mingyang

    2016-04-01

    Three-dimensional (3D) computer graphics technology is widely used in various areas and causes profound changes. As an information carrier, 3D models are becoming increasingly important. The use of 3D models greatly helps to improve the cartographic expression and design. 3D models are more visually efficient, quicker and easier to understand and they can express more detailed geographical information. However, it is hard to efficiently and precisely fuse 3D models in local systems. The purpose of this study is to propose an automatic and precise approach to fuse 3D models in geographic information systems (GIS). It is the basic premise for subsequent uses of 3D models in local systems, such as attribute searching, spatial analysis, and so on. The basic steps of our research are: (1) pose adjustment by principal component analysis (PCA); (2) silhouette extraction by simple mesh silhouette extraction and silhouette merger; (3) size adjustment; (4) position matching. Finally, we implement the above methods in our system Automotive Intelligent Chart (AIC) 3D Electronic Chart Display and Information Systems (ECDIS). The fusion approach we propose is a common method and each calculation step is carefully designed. This approach solves the problem of cross-platform model fusion. 3D models can be from any source. They may be stored in the local cache or retrieved from Internet, or may be manually created by different tools or automatically generated by different programs. The system can be any kind of 3D GIS system.

  8. GIS Based System for Post-Earthquake Crisis Managment Using Cellular Network

    Science.gov (United States)

    Raeesi, M.; Sadeghi-Niaraki, A.

    2013-09-01

    Earthquakes are among the most destructive natural disasters. Earthquakes happen mainly near the edges of tectonic plates, but they may happen just about anywhere. Earthquakes cannot be predicted. Quick response after disasters, like earthquake, decreases loss of life and costs. Massive earthquakes often cause structures to collapse, trapping victims under dense rubble for long periods of time. After the earthquake and destroyed some areas, several teams are sent to find the location of the destroyed areas. The search and rescue phase usually is maintained for many days. Time reduction for surviving people is very important. A Geographical Information System (GIS) can be used for decreasing response time and management in critical situations. Position estimation in short period of time time is important. This paper proposes a GIS based system for post-earthquake disaster management solution. This system relies on several mobile positioning methods such as cell-ID and TA method, signal strength method, angel of arrival method, time of arrival method and time difference of arrival method. For quick positioning, the system can be helped by any person who has a mobile device. After positioning and specifying the critical points, the points are sent to a central site for managing the procedure of quick response for helping. This solution establishes a quick way to manage the post-earthquake crisis.

  9. GIS-based two-dimensional numerical simulation of rainfall-induced debris flow

    Directory of Open Access Journals (Sweden)

    C. Wang

    2008-02-01

    Full Text Available This paper aims to present a useful numerical method to simulate the propagation and deposition of debris flow across the three dimensional complex terrain. A depth-averaged two-dimensional numerical model is developed, in which the debris and water mixture is assumed to be continuous, incompressible, unsteady flow. The model is based on the continuity equations and Navier-Stokes equations. Raster grid networks of digital elevation model in GIS provide a uniform grid system to describe complex topography. As the raster grid can be used as the finite difference mesh, the continuity and momentum equations are solved numerically using the finite difference method. The numerical model is applied to simulate the rainfall-induced debris flow occurred in 20 July 2003, in Minamata City of southern Kyushu, Japan. The simulation reproduces the propagation and deposition and the results are in good agreement with the field investigation. The synthesis of numerical method and GIS makes possible the solution of debris flow over a realistic terrain, and can be used to estimate the flow range, and to define potentially hazardous areas for homes and road section.

  10. GIS-based terrain analysis of linear infrastructure corridors in the Mackenzie River Valley, NWT

    International Nuclear Information System (INIS)

    Ednie, M.; Wright, J.F.; Duchesne, C.

    2007-01-01

    The impact of global warming on permafrost terrain was discussed with particular reference to the structural stability and performance reliability of the proposed pipelines and roads in the Mackenzie River Valley in the Northwest Territories. Engineers, regulators and decision makers responsible for the development of these networks must have access to information about current and future terrain conditions, both local and regional. The Geological Survey of Canada is developing an ArcGIS resident, multi-component terrain analysis methodology for evaluating permafrost terrain in terms of the probable geothermal and geomorphological responses to climate warming. A GIS-integrated finite-element transient ground thermal model (T-ONE) can predict local-regional permafrost conditions and future responses of permafrost to climate warming. The influences of surface and channel hydrology on local erosion potentials can be determined by analyzing the topographic and topologic characteristics of the terrain. A weights of evidence-based landscape-process model, currently under development, will consider multiple terrain factors for mapping terrain that is susceptible to slope failure, subsidence or erosion. This terrain analysis methodology is currently being applied to a 2 km buffer spanning the proposed Mackenzie Gas Pipeline right-of-way, and along winter and all-weather road networks in the Mackenzie River Valley. Initial ground thermal modeling has identified thermally sensitive terrain for which permafrost will either completely disappear or warm significantly to near isothermal conditions within the next 25 to 55 years

  11. Developing GIS based decision-support tools for agricultural counter-measurements after radiation accident

    International Nuclear Information System (INIS)

    Kepka, Pavel; Prochazka, Jan; Brom, Jakub; Pecharova, Emilie

    2009-01-01

    There is a whole variety of possibilities proposed by EURANOS data sheets for agriculture, for mid-term and long-term counter-measures after contamination of crops by radiation. We have developed a set of supportive tools for decision-makers within the project 'Methods of evaluation of contaminated territory after radiation accident - the importance of structure and functioning of a land cover'. Our TM tools are based on ArcGIS platform and Python programming language. We have developed a simple model for estimating the current biomass of the polluted crops. Inputs for this model are: a shape file of land cover data, database table with customisable plant growth characteristics and shape file of polluted areas. The model provides a shape file data set of estimated amounts of biomass of selected crops per hectare for a given day. The results are helpful for better performing of the countermeasure 'Early removal of crops'. The total amount of polluted waste, logistic costs (transport of people and material; required time; other costs) could be estimated only with basic GIS tools. The number of days expected for the harvest can be also calculated and compared with the dose and half-lives of the contaminating radionuclides. This analysis could also lead to a 'Do nothing' decision, especially in case of radionuclides with short times of half-life. (author)

  12. GIS BASED SYSTEM FOR POST-EARTHQUAKE CRISIS MANAGMENT USING CELLULAR NETWORK

    Directory of Open Access Journals (Sweden)

    M. Raeesi

    2013-09-01

    Full Text Available Earthquakes are among the most destructive natural disasters. Earthquakes happen mainly near the edges of tectonic plates, but they may happen just about anywhere. Earthquakes cannot be predicted. Quick response after disasters, like earthquake, decreases loss of life and costs. Massive earthquakes often cause structures to collapse, trapping victims under dense rubble for long periods of time. After the earthquake and destroyed some areas, several teams are sent to find the location of the destroyed areas. The search and rescue phase usually is maintained for many days. Time reduction for surviving people is very important. A Geographical Information System (GIS can be used for decreasing response time and management in critical situations. Position estimation in short period of time time is important. This paper proposes a GIS based system for post–earthquake disaster management solution. This system relies on several mobile positioning methods such as cell-ID and TA method, signal strength method, angel of arrival method, time of arrival method and time difference of arrival method. For quick positioning, the system can be helped by any person who has a mobile device. After positioning and specifying the critical points, the points are sent to a central site for managing the procedure of quick response for helping. This solution establishes a quick way to manage the post–earthquake crisis.

  13. Model Penilaian Risiko Kebakaran Perkotaan dengan Sistem Pakar berbasis GIS Grid-Based

    Directory of Open Access Journals (Sweden)

    Sabrillah Taridala

    2017-12-01

    Full Text Available Abstrak Kota Kendari merupakan suatu kawasan perkotaan dengan luas wilayah terkecil dan jumlah penduduk terpadat di Provinsi Sulawesi Tenggara. Bencana kebakaran di Kota Kendari sering terjadi dan telah menimbulkan kerugian yang cukup banyak, hingga menelan korban jiwa. Penelitian ini bertujuan untuk melakukan penilaian terhadap tingkat risiko bencana kebakaran di Kota Kendari dengan menggunakan pendekatan Sistem Pakar (Expert System berbasis Sistem Informasi Geografis (SIG. Hasil penelitian menujukkan bahwa tingkat risiko kebakaran di Kota Kendari terklasifikasi dalam empat kelas, yaitu tingkat risiko kebakaran sangat tinggi sebanyak 206 grid, tingkat risiko kebakaran tinggi sebanyak 6.815 grid, tingkat risiko kebakaran rendah sebanyak 46.175 grid, dan tingkat risiko kebakaran sangat rendah sebanyak 54.640 grid. Tingkat risiko kebakaran sangat tinggi di Kota Kendari merupakan kawasan terbangun yang berpenduduk padat dengan dominasi jenis material bangunan kayu dan campuran, terletak pada daerah dengan morfologi berbukit, dan aksesibilitas hanya dilalui oleh jalan umum yang memiliki lebar jalur lalu lintas <4 meter. Wilayah dengan tingkat risiko sangat rendah merupakan kawasan non-terbangun yang didominasi oleh badan air (sungai dan rawa, hutan dan sebagian kawasan pertanian (kebun. Kawasan tersebut bermorfologi datar, berbukit dan bergunung. Abstract Kendari city is an urban area with the smallest area and the densest population in Southeast Sulawesi Province. Fire disaster in the city of Kendari often occurs and has caused considerable losses, to claim casualties. This study aims to assess the risk degree of fire disaster in Kendari City using Expert System Approach based on Geographic Information System (GIS. The results showed that the degrees of fire risk in Kendari City were classified into four classes, ie very high fire risk degree, 206 grid, high fire risk degree, 6,815 grid, low fire risk degree, 46.175 grid, and very low fire risk, as

  14. Study of Noise Map and its Features in an Indoor Work Environment through GIS-Based Software

    Directory of Open Access Journals (Sweden)

    Faramarz Majidi

    2016-06-01

    Full Text Available Background: Noise mapping in industry can be useful to assess the risks of harmful noise, or to monitor noise in machine rooms. Using GIS -based software for plotting noise maps in an indoor noisy work environment can be helpful for occupational hygienists to monitor noise pollution. Methods: This study was carried out in a noisy packaging unit of a food industry in Ghazvin industrial zone, to evaluate noise levels by GIS technique. For this reason the floor of packaging unit was divided into squares of 2×2 meters and the center of each square was marked as a measurement station based on NIOSH method. The sound pressure level in each station was measured and then the measurement values were imported into Arc GIS software to plot noise map. Results: Unlike the current method, the noise maps generated by GIS technique are consistent with the nature of sound propagation. Conclusion: This study showed that for an indoor work environment, the application of GIS technology rendering the assessment of noise levels in the form of noise maps, is more realistic and more accurate than the routine method which is now being used by the occupational hygienists.

  15. Incorporating variations in pesticide catabolic activity into a GIS-based groundwater risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Posen, Paulette [School of Environmental Sciences, University of East Anglia, Earlham Road, Norwich NR4 7TJ (United Kingdom)]. E-mail: p.posen@uea.ac.uk; Lovett, Andrew [School of Environmental Sciences, University of East Anglia, Earlham Road, Norwich NR4 7TJ (United Kingdom); Hiscock, Kevin [School of Environmental Sciences, University of East Anglia, Earlham Road, Norwich NR4 7TJ (United Kingdom); Evers, Sarah [Environment Agency, Olton Court, 10 Warwick Road, Olton, Solihull, B92 7HX (United Kingdom); Ward, Rob [Environment Agency, Olton Court, 10 Warwick Road, Olton, Solihull, B92 7HX (United Kingdom); Reid, Brian [School of Environmental Sciences, University of East Anglia, Earlham Road, Norwich NR4 7TJ (United Kingdom)

    2006-08-31

    The catabolic activity of incumbent microorganisms in soil samples of eleven dissimilar soil series was investigated, with respect to the herbicide isoproturon. Soils were collected from a 30 x 37 km area of river catchment to the north-west of London, England. Catabolic activity in each soil type during a 500 h assay was determined by {sup 14}C-radiorespirometry. Results showed four soils that exhibited high levels of catabolic activity (33-44% mineralisation) while the remaining seven soils showed lower levels of catabolic activity (12-16% mineralisation). There was evidence to suggest that soils exhibiting high catabolic activity had low (< 22%) clay content and tended towards lower organic carbon content (< 2.7%), but that these higher levels of catabolic activity were also related to pre-exposure to isoproturon. The {sup 14}C-radiorespirometric results were used to produce a GIS layer representing levels of catabolic activity for the dissimilar soils across the study area. This layer was combined with other GIS layers relating to pesticide attenuation, including soil organic carbon content, depth to groundwater and hydrogeology, to produce a map showing risk of groundwater contamination by isoproturon. The output from this approach was compared with output from an attenuation-only approach and differences appraised. Inclusion of the catabolism layer resulted in a lowering of risk in the model in 15% of the study area. Although there appears to be limited benefit in including pesticide catabolic activity in this regional-scale groundwater risk model, this type of addition could be useful in a site-specific risk assessment.

  16. INTEGRATION OF GIS AND BIM FOR INDOOR GEOVISUAL ANALYTICS

    Directory of Open Access Journals (Sweden)

    B. Wu

    2016-06-01

    Full Text Available This paper presents an endeavour of integration of GIS (Geographical Information System and BIM (Building Information Modelling for indoor geovisual analytics. The merits of two types of technologies, GIS and BIM are firstly analysed in the context of indoor environment. GIS has well-developed capabilities of spatial analysis such as network analysis, while BIM has the advantages for indoor 3D modelling and dynamic simulation. This paper firstly investigates the important aspects for integrating GIS and BIM. Different data standards and formats such as the IFC (Industry Foundation Classes and GML (Geography Markup Language are discussed. Their merits and limitations in data transformation between GIS and BIM are analysed in terms of semantic and geometric information. An optimized approach for data exchange between GIS and BIM datasets is then proposed. After that, a strategy of using BIM for 3D indoor modelling, GIS for spatial analysis, and BIM again for visualization and dynamic simulation of the analysis results is presented. Based on the developments, this paper selects a typical problem, optimized indoor emergency evacuation, to demonstrate the integration of GIS and BIM for indoor geovisual analytics. The block Z of the Hong Kong Polytechnic University is selected as a test site. Detailed indoor and outdoor 3D models of the block Z are created using a BIM software Revit. The 3D models are transferred to a GIS software ArcGIS to carry out spatial analysis. Optimized evacuation plans considering dynamic constraints are generated based on network analysis in ArcGIS assuming there is a fire accident inside the building. The analysis results are then transferred back to BIM software for visualization and dynamic simulation. The developed methods and results are of significance to facilitate future development of GIS and BIM integrated solutions in various applications.

  17. Mapping of risk prone areas of kala-azar (Visceral leishmaniasis) in parts of Bihar State, India: an RS and GIS approach.

    Science.gov (United States)

    Sudhakar, S; Srinivas, T; Palit, A; Kar, S K; Battacharya, S K

    2006-09-01

    The kala-azar fever (Visceral leishmaniasis) is continuing unabated in India for over a century, now being largely confined to the eastern part of India mainly in Bihar state and to some extent in its bordering states like West Bengal and Uttar Pradesh. Two study sites namely Patepur block in Vaishali district with high endemicity in northern part and Lohardagga block in Lohardagga district with absolute non-endemicity in southern part of Bihar were selected for the study with the following objectives : (i) to study the macro-ecosystem in relation to distribution of vector -Phlebotomus argentipes; (ii) to identify/map the risk prone areas or villages in a block for quick remedial measures; and (iii) to make use of satellite remote sensing and GIS to demonstrate the utility for rapid assessment of landuse/landcover and their relation with the incidence of kalaazar leading to the mapping of risk prone areas. Indian Remote Sensing (IRS)-1D LISS III satellite data for the periods of March and November 2000 were analysed in Silicon graphic image processing system using ERDAS software. False color composites (FCC) were generated and landuse/landcover was assessed using Maximum likelihood supervised classification techniques based on ground truth training sets. During the study the GIS functions are used to quantify the remotely sensed landscape proportions of 5 km2 buffer surrounding each known group of villages of high occurrence of sandflies in endemic and nonendemic study sites. Instead of traditional ground based survey methods to vector surveillance, the present study used a combination of remote sensing (RS) and geographical information system (GIS) approach to develop landscape predictors of sandfly abundance-an indicator of human vector contact and as a measure of risk prone areas. Statistical analysis using the remotely sensed landscape variables showed that rural villages surrounded by higher proportion of transitional swamps with soft stemmed edible plants and

  18. GIS-based maps and area estimates of Northern Hemisphere permafrost extent during the Last Glacial Maximum

    NARCIS (Netherlands)

    Lindgren, A.; Hugelius, G.; Kuhry, P.; Christensen, T.R.; Vandenberghe, J.F.

    2016-01-01

    This study presents GIS-based estimates of permafrost extent in the northern circumpolar region during the Last Glacial Maximum (LGM), based on a review of previously published maps and compilations of field evidence in the form of ice-wedge pseudomorphs and relict sand wedges. We focus on field

  19. Real-time Geographic Information System (GIS) for Monitoring the Area of Potential Water Level Using Rule Based System

    Science.gov (United States)

    Anugrah, Wirdah; Suryono; Suseno, Jatmiko Endro

    2018-02-01

    Management of water resources based on Geographic Information System can provide substantial benefits to water availability settings. Monitoring the potential water level is needed in the development sector, agriculture, energy and others. In this research is developed water resource information system using real-time Geographic Information System concept for monitoring the potential water level of web based area by applying rule based system method. GIS consists of hardware, software, and database. Based on the web-based GIS architecture, this study uses a set of computer that are connected to the network, run on the Apache web server and PHP programming language using MySQL database. The Ultrasound Wireless Sensor System is used as a water level data input. It also includes time and geographic location information. This GIS maps the five sensor locations. GIS is processed through a rule based system to determine the level of potential water level of the area. Water level monitoring information result can be displayed on thematic maps by overlaying more than one layer, and also generating information in the form of tables from the database, as well as graphs are based on the timing of events and the water level values.

  20. Object-Based Change Detection Using High-Resolution Remotely Sensed Data and GIS

    Science.gov (United States)

    Sofina, N.; Ehlers, M.

    2012-08-01

    High resolution remotely sensed images provide current, detailed, and accurate information for large areas of the earth surface which can be used for change detection analyses. Conventional methods of image processing permit detection of changes by comparing remotely sensed multitemporal images. However, for performing a successful analysis it is desirable to take images from the same sensor which should be acquired at the same time of season, at the same time of a day, and - for electro-optical sensors - in cloudless conditions. Thus, a change detection analysis could be problematic especially for sudden catastrophic events. A promising alternative is the use of vector-based maps containing information about the original urban layout which can be related to a single image obtained after the catastrophe. The paper describes a methodology for an object-based search of destroyed buildings as a consequence of a natural or man-made catastrophe (e.g., earthquakes, flooding, civil war). The analysis is based on remotely sensed and vector GIS data. It includes three main steps: (i) generation of features describing the state of buildings; (ii) classification of building conditions; and (iii) data import into a GIS. One of the proposed features is a newly developed 'Detected Part of Contour' (DPC). Additionally, several features based on the analysis of textural information corresponding to the investigated vector objects are calculated. The method is applied to remotely sensed images of areas that have been subjected to an earthquake. The results show the high reliability of the DPC feature as an indicator for change.

  1. Integration of Spatially Hydrological Modelling on Bentong Catchment, Pahang, Peninsular Malaysia Using Distributed GIS-based Rainfall Runoff Model

    Directory of Open Access Journals (Sweden)

    Rosli, M.H.

    2017-07-01

    Full Text Available With the advance of GIS technology, hydrology model can simulated at catchment wide scale. The objective is to integrate National Resource Conservation Service (NRCS Curve Number (CN with kinematic wave and manning’s equation using GIS to develop a simple GIS-based distributed model to simulate rainfall runoff in Bentong catchment. Model was built using Spatial Distributed Direct Hydrograph (SDDH concept and applying the time area (TA approach in presenting the predicted discharge hydrograph. The effective precipitation estimation was first calculated using the NRCS CN method. Then, the core maps that consists of digital elevation model (DEM, soil and land use map in grid. DEM was used to derive slope, flow direction and flow accumulation while soil and land use map used to derive roughness coefficient and CN. The overland velocity and channel velocity estimation derived from combination of kinematic wave theory with Manning’s equation. To capture the time frame, the travel time map was divided into isochrones in order to generate the TA histogram and finally. The creation of SDDH using the TA histogram which will lead to the estimation of travel time for the catchment. Simulated hydrograph was plotted together with the observed discharge for comparison. Six storm events used for model performance evaluation using statistical measure such as Nash-Sutcliffe efficiency (NSE, percent bias (PBIAS and coefficient of determination (R2;. SDDH model performed quite well as NSE gave result ranging from 0.55 to 0.68 with mean of 0.6. PBIAS indicate that the model slightly over predicted compared to observed hydrograph with result ranges from -46.71 (the most over predicted to +4.83 (the most under predicted with average of -20.73%. R2; ranges between 0.55 to 0.82 with mean of 0.67. When comparing the time to peak, (tp, min, and peak discharge, (pd, m3/s, results gave NSEtp 0.82, PBIAStp 0.65, R2tp 0.32, NSEpd 0.95, PBIASpd 14.49 and R2pd 0

  2. An Indoor Scene Recognition-Based 3D Registration Mechanism for Real-Time AR-GIS Visualization in Mobile Applications

    Directory of Open Access Journals (Sweden)

    Wei Ma

    2018-03-01

    Full Text Available Mobile Augmented Reality (MAR systems are becoming ideal platforms for visualization, permitting users to better comprehend and interact with spatial information. Subsequently, this technological development, in turn, has prompted efforts to enhance mechanisms for registering virtual objects in real world contexts. Most existing AR 3D Registration techniques lack the scene recognition capabilities needed to describe accurately the positioning of virtual objects in scenes representing reality. Moreover, the application of such registration methods in indoor AR-GIS systems is further impeded by the limited capacity of these systems to detect the geometry and semantic information in indoor environments. In this paper, we propose a novel method for fusing virtual objects and indoor scenes, based on indoor scene recognition technology. To accomplish scene fusion in AR-GIS, we first detect key points in reference images. Then, we perform interior layout extraction using a Fully Connected Networks (FCN algorithm to acquire layout coordinate points for the tracking targets. We detect and recognize the target scene in a video frame image to track targets and estimate the camera pose. In this method, virtual 3D objects are fused precisely to a real scene, according to the camera pose and the previously extracted layout coordinate points. Our results demonstrate that this approach enables accurate fusion of virtual objects with representations of real world indoor environments. Based on this fusion technique, users can better grasp virtual three-dimensional representations on an AR-GIS platform.

  3. A GIS-based human health risk assessment for urban green space planning--an example from Grugliasco (Italy).

    Science.gov (United States)

    Poggio, Laura; Vrscaj, Borut

    2009-11-15

    The need to develop approaches for risk-based management of soil contamination, as well as the integration of the assessment of the human health risk (HHR) due to the soil contamination in the urban planning procedures has been the subject of recent attention of scientific literature and policy makers. The spatial analysis of environmental data offers multiple advantages for studying soil contamination and HHR assessment, facilitating the decision making process. The aim of this study was to explore the possibilities and benefits of spatial implementation of a quantitative HHR assessment methodology for a planning case in a typical urban environment where the soil is contaminated. The study area is located in the city of Grugliasco a part of the Turin (Italy) metropolitan area. The soils data were derived from a site specific soil survey and the land-use data from secondary sources. In the first step the soil contamination data were geo-statistically analysed and a spatial soil contamination data risk modelling procedure designed. In order to spatially assess the HHR computer routines were developed using GIS raster tools. The risk was evaluated for several different land uses for the planned naturalistic park area. The HHR assessment indicated that the contamination of soils with heavy metals in the area is not sufficient to induce considerable health problems due to typical human behaviour within the variety of urban land uses. An exception is the possibility of direct ingestion of contaminated soil which commonly occurs in playgrounds. The HHR evaluation in a planning case in the Grugliasco Municipality confirms the suitability of the selected planning option. The construction of the naturalistic park presents one solution for reducing the impacts of soil contamination on the health of citizens. The spatial HHR evaluation using GIS techniques is a diagnostic procedure for assessing the impacts of urban soil contamination, with which one can verify planning

  4. A GIS based district information system for water resources management and planning

    Science.gov (United States)

    Tzabiras, John; Spiliotopoulos, Marios; Kokkinos, Kostantinos; Fafoutis, Chrysostomos; Sidiropoulos, Pantelis; Vasiliades, Lampros; Loukas, Athanasios; Mylopoulos, Nikitas

    2014-05-01

    In many watersheds of the Mediterranean Countries, water resources are presently fully or overcommitted. Irrigators are the largest consumers of fresh water in Mediterranean Countries using up to 80% of all allocated water in some regions. Administrative efforts should be directed towards an integrated policy of water allocation which accounts for the characteristics and specificity of each farm, requiring the availability of data bases and management tools (decision support systems) specifically designed to fulfil the objectives of maximizing water use efficiency. The overall objective of this program was the development of a District Information System (DIS) which could be used by stakeholders at purposes of irrigation district day-to-day management as well as for planning and strategic decision-making. The DIS was developed from a GIS-based modelling approach which integrates a generic crop model, a hydraulic module for the water transfer/distribution system and uses remote sensing information. The main sub-objectives were: (i) the development of an operational algorithm to retrieve crop evapotranspiration from remote sensing data, (ii) the development of an information system with friendly user interface for the data base, the crop module and the hydraulic module and (iii) the analysis and validation of management scenarios from model simulations predicting the respective behaviour. Surface Energy Balance Algorithm for Land (SEBAL) was used to derive monthly actual evapotranspiration (ET) values from Landsat TM imagery. Meteorological data from the archive of the Institute for Research and Technology, Thessaly (I.RE.TE.TH) have also been used. The methodology was developed using high quality Landsat TM images during 2007 growing season. Monthly ET values are then used as an input to CROPWAT model. Outputs of CROPWAT model are then used as input for the hydraylic module consisted of TECHNOLOGISMIKI, WATERCAD and WEAP model. Hence, a reference scenario was

  5. Gis Approach to Estimation of the Total Phosphorous Transfer in the Pilica River Lowland Catchment

    Directory of Open Access Journals (Sweden)

    Magnuszewski Artur

    2014-09-01

    Full Text Available In this paper, the Pilica River catchment (central Poland is analyzed with a focus on understanding the total phosphorous transfer along the river system which also contains the large artificial Sulejów Reservoir. The paper presents a GIS method for estimating the total phosphorous (TP load from proxy data representing sub-catchment land use and census data. The modelled load of TP is compared to the actual transfer of TP in the Pilica River system. The results shows that the metrics of connectivity between river system and dwelling areas as well as settlement density in the sub-catchments are useful predictors of the total phosphorous load. The presence of a large reservoir in the middle course of the river can disrupt nutrient transport along a river continuum by trapping and retaining suspended sediment and its associated TP load. Analysis of the indirect estimation of TP loads with the GIS analysis can be useful for identifying beneficial reservoir locations in a catchment. The study has shown that the Sulejów Reservoir has been located in a subcatchment with a largest load of the TP, and this feature helps determine the problem of reservoir eutrphication

  6. Engineering sustainable ecosystems: using GIS-based habitat modeling for oil sands mine reclamation and closure planning

    International Nuclear Information System (INIS)

    Seel, K.

    1997-01-01

    A GIS model was built to predict the climax vegetation habitat types on reclaimed mine surfaces in the Fort McMurray region of the Mid-Boreal Mixedwood Ecoregion of northwestern Alberta. Regional vegetation habitat types were classified by digital remote sensing using Landsat Thematic Mapper satellite data. Terrain data was derived from a high-resolution digital elevation model. The validated model was applied to the GIS database of Syncrude Canada's Mildred Lake Mine to predict future vegetation patterns based on the final closure mine surface. The results were compared to revegetation and closure plans created by experts to analyze performance and sustainability of reclamation efforts

  7. Regional-scale analysis of lake outburst hazards in the southwestern Pamir, Tajikistan, based on remote sensing and GIS

    Directory of Open Access Journals (Sweden)

    M. Mergili

    2011-05-01

    Full Text Available This paper presents an analysis of the hazards emanating from the sudden drainage of alpine lakes in South-Western Tajik Pamir. In the last 40 yr, several new lakes have formed in the front of retreating glacier tongues, and existing lakes have grown. Other lakes are dammed by landslide deposits or older moraines. In 2002, sudden drainage of a glacial lake in the area triggered a catastrophic debris flow. Building on existing approaches, a rating scheme was devised allowing quick, regional-scale identification of potentially hazardous lakes and possible impact areas. This approach relies on GIS, remote sensing and empirical modelling, largely based on medium-resolution international datasets. Out of the 428 lakes mapped in the area, 6 were rated very hazardous and 34 hazardous. This classification was used for the selection of lakes requiring in-depth investigation. Selected cases are presented and discussed in order to understand the potentials and limitations of the approach used. Such an understanding is essential for the appropriate application of the methodology for risk mitigation purposes.

  8. Application of raster-based GIS techniques in the siting of landfills in Trabzon Province, Turkey: a case study.

    Science.gov (United States)

    Yildirim, Volkan

    2012-09-01

    One of the most important steps in solid waste management is the selection of an appropriate landfill site. The site selection process requires the evaluation and analysis of several criteria. However, the traditional evaluation method is not sufficient for the site selection process. Geographical information system (GIS) technologies are effectively used in the process of site selection, which is a spatial problem. This article describes a raster GIS-based landfill site selection (LSS) method. This method utilizes a raster-based spatial database in which the factors affect the landfill site selection. The final product in this method is the cost surface map showing pixel-based values of the appropriate areas. Furthermore, this GIS-based LSS method was applied for the evaluation of two landfill sites in Trabzon Province in Turkey, for which the traditional evaluation method for site selection was used. The suitability values on the cost surface map of these two landfills have shown that these sites are not appropriate for a solid waste landfill. In conclusion, it was demonstrated that the method of raster GIS-based site selection gives more effective results than traditional methods.

  9. ABM and GIS-based multi-scenarios volcanic evacuation modelling of Merapi

    Science.gov (United States)

    Jumadi, Carver, Steve; Quincey, Duncan

    2016-05-01

    Conducting effective evacuation is one of the successful keys to deal with such crisis. Therefore, a plan that considers the probability of the spatial extent of the hazard occurrences is needed. Likewise, the evacuation plan in Merapi is already prepared before the eruption on 2010. However, the plan could not be performed because the eruption magnitude was bigger than it was predicted. In this condition, the extent of the hazardous area was increased larger than the prepared hazard model. Managing such unpredicted situation need adequate information that flexible and adaptable to the current situation. Therefore, we applied an Agent-based Model (ABM) and Geographic Information System (GIS) using multi-scenarios hazard model to support the evacuation management. The methodology and the case study in Merapi is provided.

  10. Development of GIS-based Wind Potential Map of Makkah Province, Saudi Arabia

    Science.gov (United States)

    Nayyar, Z. A.; Zaigham, N. A.; Aburizaiza, O. S.; Mahar, G. A.; Eusufi, S. N.

    2011-12-01

    Global energy scenario is changing drastically toward decline, as new major discoveries of fossil fuel are not coming up significantly on regional basis. In case of Saudi Arabia, one of the largest fossil fuel producers, the major oil fields have started exhausting significantly as revealed from the literature research study. Considering the future energy crisis, different other renewable options presently have became imperative to be consider anticipating for the national development. Wind energy in one of them. The development of wind energy technology requires the baseline data relevant to the wind trends and their potentials. Under the present study, an attempt has been made to develop wind power density map of the Makkah Province of Saudi Arabia based on the meteorological data collected at different sparsely located weather stations. GIS application has provided a good option to interpolate the gap areas between the sparsely located weather recording stations. This paper describe the methodology and results of the present study.

  11. Research on sudden environmental pollution public service platform construction based on WebGIS

    Science.gov (United States)

    Bi, T. P.; Gao, D. Y.; Zhong, X. Y.

    2016-08-01

    In order to actualize the social sharing and service of the emergency-response information for sudden pollution accidents, the public can share the risk source information service, dangerous goods control technology service and so on, The SQL Server and ArcSDE software are used to establish a spatial database to restore all kinds of information including risk sources, hazardous chemicals and handling methods in case of accidents. Combined with Chinese atmospheric environmental assessment standards, the SCREEN3 atmospheric dispersion model and one-dimensional liquid diffusion model are established to realize the query of related information and the display of the diffusion effect under B/S structure. Based on the WebGIS technology, C#.Net language is used to develop the sudden environmental pollution public service platform. As a result, the public service platform can make risk assessments and provide the best emergency processing services.

  12. State Base Map for GIS – New Digital Topographic Map of the Republic of Macedonia

    Directory of Open Access Journals (Sweden)

    Zlatko Srbinoski

    2009-12-01

    Full Text Available The basic aim of the National Spatial Data Infrastructure (NSDI built in accordance with INSPIRE directive is to standardize spatial data infrastructure on national level. In that direction, topographic maps are a basic platform for acquiring spatial data within geoinformation systems and one of the most important  segments of NSDI. This paper presents methodology of establishing the new digital topographic map of the Republic of Macedonia titled “State Base Map for GIS in Macedonia”. This paper analyzes geometrical accuracy of new digital topographic maps. Production of the new digital topographic map has been the most important cartographic project in the Republic of Macedonia since it became independent.

  13. Gis Based Analysis For Suitability Location Finding In The Residential Development Areas Of Greater Matara Region

    Directory of Open Access Journals (Sweden)

    H.K.G.M Madurika

    2017-02-01

    Full Text Available Urban Planning and Land utilization for the Residential is one of crucial factors in high density Cities. Many theories in Planning explain the Residential areas are moving to periphery areas in cities by its commercial development. Martara is one of developing city in Southern Sri Lanka and Residential land value are comparative high in city sub urban areas. In this study it is examined that where is the best locations for residential development in Grater Matara Region by using five criteria. GIS based Multi Criteria Method MCE method have been applied to find the suitable locations. The results of analysis have been shown that there are 5378.99 hectares area suitable within study area and however extremely importance areas only 1.40 hectares accordingly given criteria but very strongly importance and importance category have 1560.51 and 2468.22 respectively.

  14. GIS-Based Noise Simulation Open Source Software: N-GNOIS

    Science.gov (United States)

    Vijay, Ritesh; Sharma, A.; Kumar, M.; Shende, V.; Chakrabarti, T.; Gupta, Rajesh

    2015-12-01

    Geographical information system (GIS)-based noise simulation software (N-GNOIS) has been developed to simulate the noise scenario due to point and mobile sources considering the impact of geographical features and meteorological parameters. These have been addressed in the software through attenuation modules of atmosphere, vegetation and barrier. N-GNOIS is a user friendly, platform-independent and open geospatial consortia (OGC) compliant software. It has been developed using open source technology (QGIS) and open source language (Python). N-GNOIS has unique features like cumulative impact of point and mobile sources, building structure and honking due to traffic. Honking is the most common phenomenon in developing countries and is frequently observed on any type of roads. N-GNOIS also helps in designing physical barrier and vegetation cover to check the propagation of noise and acts as a decision making tool for planning and management of noise component in environmental impact assessment (EIA) studies.

  15. Geoscience information integration and visualization research of Shandong Province, China based on ArcGIS engine

    Science.gov (United States)

    Xu, Mingzhu; Gao, Zhiqiang; Ning, Jicai

    2014-10-01

    To improve the access efficiency of geoscience data, efficient data model and storage solutions should be used. Geoscience data is usually classified by format or coordinate system in existing storage solutions. When data is large, it is not conducive to search the geographic features. In this study, a geographical information integration system of Shandong province, China was developed based on the technology of ArcGIS Engine, .NET, and SQL Server. It uses Geodatabase spatial data model and ArcSDE to organize and store spatial and attribute data and establishes geoscience database of Shangdong. Seven function modules were designed: map browse, database and subject management, layer control, map query, spatial analysis and map symbolization. The system's characteristics of can be browsed and managed by geoscience subjects make the system convenient for geographic researchers and decision-making departments to use the data.

  16. A CLOUD-BASED PLATFORM SUPPORTING GEOSPATIAL COLLABORATION FOR GIS EDUCATION

    Directory of Open Access Journals (Sweden)

    X. Cheng

    2015-05-01

    Full Text Available GIS-related education needs support of geo-data and geospatial software. Although there are large amount of geographic information resources distributed on the web, the discovery, process and integration of these resources are still unsolved. Researchers and teachers always searched geo-data by common search engines but results were not satisfied. They also spent much money and energy on purchase and maintenance of various kinds of geospatial software. Aimed at these problems, a cloud-based geospatial collaboration platform called GeoSquare was designed and implemented. The platform serves as a geoportal encouraging geospatial data, information, and knowledge sharing through highly interactive and expressive graphic interfaces. Researchers and teachers can solve their problems effectively in this one-stop solution. Functions, specific design and implementation details are presented in this paper. Site of GeoSquare is: http://geosquare.tianditu.com/

  17. a Cloud-Based Platform Supporting Geospatial Collaboration for GIS Education

    Science.gov (United States)

    Cheng, X.; Gui, Z.; Hu, K.; Gao, S.; Shen, P.; Wu, H.

    2015-05-01

    GIS-related education needs support of geo-data and geospatial software. Although there are large amount of geographic information resources distributed on the web, the discovery, process and integration of these resources are still unsolved. Researchers and teachers always searched geo-data by common search engines but results were not satisfied. They also spent much money and energy on purchase and maintenance of various kinds of geospatial software. Aimed at these problems, a cloud-based geospatial collaboration platform called GeoSquare was designed and implemented. The platform serves as a geoportal encouraging geospatial data, information, and knowledge sharing through highly interactive and expressive graphic interfaces. Researchers and teachers can solve their problems effectively in this one-stop solution. Functions, specific design and implementation details are presented in this paper. Site of GeoSquare is: http://geosquare.tianditu.com/

  18. A WebGIS-based command control system for forest fire fighting

    Science.gov (United States)

    Yang, Jianyu; Ming, Dongping; Zhang, Xiaodong; Huang, Haitao

    2006-10-01

    Forest is a finite resource and fire prevention is crucial work. However, once a forest fire or accident occurs, timely and effective fire-fighting is the only necessary measure. The aim of this research is to build a computerized command control system based on WEBGIS to direct fire-fighting. Firstly, this paper introduces the total technique flow and functional modules of the system. Secondly, this paper analyses the key techniques for building the system, and they are data obtaining, data organizing & management, architecture of WebGIS and sharing & interoperation technique. In the end, this paper demonstrates the on line martial symbol editing function to show the running result of system. The practical application of this system showed that it played very important role in the forest fire fighting work. In addition, this paper proposes some strategic recommendations for the further development of the system.

  19. Spatio-temporal trend analysis of precipitation in Guizhou province based on GIS technology

    Science.gov (United States)

    Wu, Jianfeng; Zhang, Fengtai; Pan, Yuanfen; Li, Wei; Cao, Guangjie; An, Youzhi

    2018-02-01

    Precipitation changes are closely related to human production and life. Based on the data of Guizhou Province from 1998 to 2012, the temporal and spatial characteristics of precipitation in Guizhou Province were analyzed from the annual, seasonal and monthly scales by linear trend analysis and ArcGIS kriging spatial interpolation. The results show that the annual precipitation is mainly concentrated in the summer, accounting for 47.6% of the year, followed by spring accounted for 26.9%, autumn accounted for 18.6% in winter accounted for 6.9%. In the time, the precipitation in the study area shows a decreasing trend in the annual scale, seasonal scale and July. The overall spatial precipitation distribution shows a decreasing trend from the east to the west. The precipitation also in the south is higher than the northern region.

  20. A Decision Support System for Business Location Based on Open GIS Technology and Data

    Directory of Open Access Journals (Sweden)

    Cornel Ghita

    2014-06-01

    Full Text Available This article presents the architecture, features, and operating mode of a DSS (Decision Support System aiming to assist entrepreneurs and managers in the process of location decision making. The research assembled concepts derived from theory, findings of empirical studies, together with open GIS (Geographical Information System software and data, and modelled them into a DSS software tool, according to an original methodology and design. The users are guided step-by-step to input information on their businesses into the DSS (industry, preferences for land-use areas and facility types, weights of key location factors, and are returned two sets of results: one based on own options, and another one aggregate for the industry they operate in. The results consist in the top five locations for the user's firm, as well as for the industry, depicted both in a graphical report (map and a text report (explanation of results.

  1. A GIS-based susceptibility map for landslides at the Franconian Alb, Germany

    Science.gov (United States)

    Jaeger, Daniel; Wilde, Martina; Lorenz, Michael; Terhorst, Birgit; Neuhäuser, Bettina; Damm, Bodo; Bemm, Stefan

    2014-05-01

    In general, slopes of cuesta scarps like the Franconian Alb are highly prone to slide activity due to susceptible geological and geomorphological conditions. The geological setting with alternating permeable and non-permeable bedrock results in the characteristic cuesta landforms of almost flat backslopes and steeper front slopes. Furthermore, this bipartite structure leads to a strong disposition for mass movements. The slopes of the study area near the town of Ebermannstadt are affected by different types of mass movements, such as topples, slides, lateral spreads and flows, either in single or in combined occurrence. In the years 1625, 1957, 1961 and 1979, four large landslides took place in the area of Ebermannstadt, reaching close to the town limits and causing major destructions to traffic facilities. In the study area, slopes are covered by debris and slide masses, thus they are prone to remobilization and further mass movements. In order to assess hazardous areas, a GIS-based susceptibility modelling was generated for the study area. The susceptibtibility modeling was processed with the slope stability model SINMAP (Stability Index Mapping), developed by TARBOTON (1997) and PACK et al. (1999). As SINMAP was particularly designed to model shallow translational slides, it should be well designed for describing the conditions of the study area in a sufficient way. SINMAP is based on the "infinite slope stability model" by HAMMONT et al. (1992) and MONTGOMERY & DIETRICH (1994), which focuses on the relation of stabilizing (cohesiveness, friction angle) and destabilizing (gravitation) factors on a plain surface. By adding a slope gradient, as well as soil mechanical and climatical data, indices of slope stabilities are calculated. For a more detailed modeling of the slope conditions, SINMAP computes different "calibration regions", which merge similar parameters of soil, land-use, vegetation, and geology. Due to the fact that vegetation, land-use, and soils only

  2. A European perspective on GIS-based walkability and active modes of transport.

    Science.gov (United States)

    Grasser, Gerlinde; van Dyck, Delfien; Titze, Sylvia; Stronegger, Willibald J

    2017-02-01

    The association between GIS-based walkability and walking for transport is considered to be well established in USA and in Australia. Research on the association between walkability and cycling for transport in European cities is lacking. The aim of this study was to test the predictive validity of established walkability measures and to explore alternative walkability measures associated with walking and cycling for transport in a European context. Outcome data were derived from the representative cross-sectional survey ( n  = 843) ‘Radfreundliche Stadt’ of adults in the city of Graz (Austria). GIS-based walkability was measured using both established measures (e.g. gross population density, household unit density, entropy index, three-way intersection density, IPEN walkability index) and alternative measures (e.g. proportion of mixed land use, four-way intersection density, Graz walkability index). ANCOVAs were conducted to examine the adjusted association between walkability measures and outcomes. Household unit density, proportion of mixed land use, three-way intersection density and IPEN walkability index were positively associated with walking for transport, but the other measures were not. All walkability measures were positively associated with cycling for transport. The established walkability measures were applicable to a European city such as Graz. The alternative walkability measures performed well in a European context. Due to measurement issues the association between these walkability measures and walking for transport needs to be investigated further. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  3. GIS/RS-based Rapid Reassessment for Slope Land Capability Classification

    Science.gov (United States)

    Chang, T. Y.; Chompuchan, C.

    2014-12-01

    Farmland resources in Taiwan are limited because about 73% is mountainous and slope land. Moreover, the rapid urbanization and dense population resulted in the highly developed flat area. Therefore, the utilization of slope land for agriculture is more needed. In 1976, "Slope Land Conservation and Utilization Act" was promulgated to regulate the slope land utilization. Consequently, slope land capability was categorized into Class I-IV according to 4 criteria, i.e., average land slope, effective soil depth, degree of soil erosion, and parent rock. The slope land capability Class I-VI are suitable for cultivation and pasture. Whereas, Class V should be used for forestry purpose and Class VI should be the conservation land which requires intensive conservation practices. The field survey was conducted to categorize each land unit as the classification scheme. The landowners may not allow to overuse land capability limitation. In the last decade, typhoons and landslides frequently devastated in Taiwan. The rapid post-disaster reassessment of the slope land capability classification is necessary. However, the large-scale disaster on slope land is the constraint of field investigation. This study focused on using satellite remote sensing and GIS as the rapid re-evaluation method. Chenyulan watershed in Nantou County, Taiwan was selected to be a case study area. Grid-based slope derivation, topographic wetness index (TWI) and USLE soil loss calculation were used to classify slope land capability. The results showed that GIS-based classification give an overall accuracy of 68.32%. In addition, the post-disaster areas of Typhoon Morakot in 2009, which interpreted by SPOT satellite imageries, were suggested to classify as the conservation lands. These tools perform better in the large coverage post-disaster update for slope land capability classification and reduce time-consuming, manpower and material resources to the field investigation.

  4. Classification of forest-based ecotourism areas in Pocahontas County of West Virginia using GIS and pairwise comparison method

    Science.gov (United States)

    Ishwar Dhami; Jinyang. Deng

    2012-01-01

    Many previous studies have examined ecotourism primarily from the perspective of tourists while largely ignoring ecotourism destinations. This study used geographical information system (GIS) and pairwise comparison to identify forest-based ecotourism areas in Pocahontas County, West Virginia. The study adopted the criteria and scores developed by Boyd and Butler (1994...

  5. Development of Web GIS-Based VFSMOD System with Three Modules for Effective Vegetative Filter Strip Design

    Directory of Open Access Journals (Sweden)

    Dong Soo Kong

    2013-08-01

    Full Text Available In recent years, Non-Point Source Pollution has been rising as a significant environmental issue. The sediment-laden water problem is causing serious impacts on river ecosystems not only in South Korea but also in most countries. The vegetative filter strip (VFS has been thought to be one of the most effective methods to reduce the transport of sediment to down-gradient area. However, the effective width of the VFS first needs to be determined before VFS installation in the field. To provide an easy-to-use interface with a scientific VFS modeling engine, the Web GIS-based VFSMOD system was developed in this study. The Web GIS-based VFSMOD uses the UH and VFSM executable programs from the VFSMOD-w model as core engines to simulate rainfall-runoff and sediment trapping. To provide soil information for a point of interest, the Google Map interface to the MapServer soil database system was developed using the Google Map API, Javascript, Perl/CGI, and Oracle DB programming. Three modules of the Web GIS-based VFSMOD system were developed for various VFS designs under single storm, multiple storm, and long-term period scenarios. These modules in the Web GIS-based VFSMOD system were applied to the study watershed in South Korea and these were proven as efficient tools for the VFS design for various purposes.

  6. Geospatial Data Availability for Haiti: An Aid in the Development of GIS-Based Natural Resource Assessments for Conservation Planning.

    Science.gov (United States)

    Maya Quinones; William Gould; Carlos D. Rodriguez-Pedraza

    2007-01-01

    This report documents the type and source of geospatial data available for Haiti. It was compiled to serve as a resource for geographic information system (GIS)-based land management and planning. It will be useful for conservation planning, reforestation efforts, and agricultural extension projects. Our study indicates that there is a great deal of geospatial...

  7. Paper-Based GIS: A Practical Answer to the Implementation of GIS Education into Resource-Poor Schools in South Africa

    Science.gov (United States)

    Breetzke, Gregory; Eksteen, Sanet; Pretorius, Erika

    2011-01-01

    Geographical information systems (GIS) were phased into the geography curriculum of South African schools from 2006-2008 as part of the National Curriculum Statement (NCS) for grades 10-12. Since its introduction, GIS education in schools across the country has been met with a number of challenges including the cost of purchasing the hardware and…

  8. GIS4schools: custom-made GIS-applications for educational use

    Science.gov (United States)

    Demharter, Timo; Michel, Ulrich

    2013-10-01

    From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS [1]. Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

  9. A GIS-based 3D online information system for underground energy storage in northern Germany

    Science.gov (United States)

    Nolde, Michael; Malte, Schwanebeck; Ehsan, Biniyaz; Rainer, Duttmann

    2015-04-01

    We would like to present the concept and current state of development of a GIS-based 3D online information system for underground energy storage. Its aim is to support the local authorities through pre-selection of possible sites for thermal, electrical and substantial underground energy storages. Since the extension of renewable energies has become legal requirement in Germany, the underground storing of superfluously produced green energy (such as during a heavy wind event) in the form of compressed air, gas or heated water has become increasingly important. However, the selection of suitable sites is a complex task. The presented information system uses data of geological features such as rock layers, salt domes and faults enriched with attribute data such as rock porosity and permeability. This information is combined with surface data of the existing energy infrastructure, such as locations of wind and biogas stations, powerline arrangement and cable capacity, and energy distribution stations. Furthermore, legal obligations such as protected areas on the surface and current underground mining permissions are used for the process of pre-selecting sites suitable for energy storage. Not only the current situation but also prospective scenarios, such as expected growth in produced amount of energy are incorporated in the system. While the process of pre-selection itself is completely automated, the user has full control of the weighting of the different factors via the web interface. The system is implemented as an online 3D server GIS environment, so that it can easily be utilized in any web browser. The results are visualized online as interactive 3d graphics. The information system is implemented in the Python programming language in combination with current Web standards, and is build using only free and open source software. It is being developed at Kiel University as part of the ANGUS+ project (lead by Prof. Sebastian Bauer) for the federal state of

  10. Renewable energy: GIS-based mapping and modelling of potentials and demand

    Science.gov (United States)

    Blaschke, Thomas; Biberacher, Markus; Schardinger, Ingrid.; Gadocha, Sabine; Zocher, Daniela

    2010-05-01

    Worldwide demand of energy is growing and will continue to do so for the next decades to come. IEA has estimated that global primary energy demand will increase by 40 - 50% from 2003 to 2030 (IEA, 2005) depending on the fact whether currently contemplated energy policies directed towards energy-saving and fuel-diversification will be effectuated. The demand for Renewable Energy (RE) is undenied but clear figures and spatially disaggregated potentials for the various energy carriers are very rare. Renewable Energies are expected to reduce pressures on the environment and CO2 production. In several studies in Germany (North-Rhine Westphalia and Lower Saxony) and Austria we studied the current and future pattern of energy production and consumption. In this paper we summarize and benchmark different RE carriers, namely wind, biomass (forest and non-forest, geothermal, solar and hydro power. We demonstrate that GIS-based scalable and flexible information delivery sheds new light on the prevailing metaphor of GIS as a processing engine serving needs of users more on demand rather than through ‘maps on stock'. We compare our finding with those of several energy related EU-FP7 projects in Europe where we have been involved - namely GEOBENE, REACCESS, ENERGEO - and demonstrate that more and more spatial data will become available together with tools that allow experts to do their own analyses and to communicate their results in ways which policy makers and the public can readily understand and use as a basis for their own actions. Geoportals in combination with standardised geoprocessing today supports the older vision of an automated presentation of data on maps, and - if user privileges are given - facilities to interactively manipulate these maps. We conclude that the most critical factor in modelling energy supply and demand remain the economic valuation of goods and services, especially the forecast of future end consumer energy costs.

  11. Lentinula edodes based GIS mapping, biometabolites and antiinflamatory activity of wild edible mushrooms

    Science.gov (United States)

    Khaund, Polashree; Joshi, S R

    2016-03-01

    The biodiversity rich state of Meghalaya, India located in the realms of mega-biodiversity hotspots, is home to numerous species of wild edible macrofungi that are used extensively by the mycophillic ethnic population, as a part of their traditional cuisine and medicine systems. However, habitat loss, due to deforestation and climate change, is destroying the natural population of these mushrooms, depleting their availability to the local communities. In the present investigation, a GIS guided habitat search, using Lentinula edodes as a representative species, was used in mapping the habitats of wild edible macrofungi of the study region. Sampling of around 4 000 specimens per distinct morphological type available in the traditional markets and “sacred grove” forests indicated presence of ten common genera, belonging to nine different families of wild edible mushrooms. Nutritional profiling of the representative species Lentinula edodes was carried out by evaluation of its moisture, total fat, crude protein and carbohydrates contents by standard methods. Similarly, bioactive components determination was performed by estimation of total phenols, flavonoids, ascorbic acid, β-carotene and lycopenes. Bioactivity of the mushrooms extracts was studied using the DPPH radical scavenging and Human Red Blood Cell (HRBC) membrane stabilization assays. The present investigation successfully attempted to explore remote sensing technologies and GIS (Geographic Information System) based system to predict the natural habitats of wild edible mushrooms of Meghalaya, India which we believe will lead to the generation of a mushroom specific non-wood forest resource mapping system in the near future. Results of nutritional profiling and biological activity studies on the representative species of wild edible mushrooms from the studied region revealed that it is a rich source of essential nutrients and antioxidants.

  12. A GIS Approach to Identifying Socially and Medically Vulnerable Older Adult Populations in South Florida.

    Science.gov (United States)

    Hames, Elizabeth; Stoler, Justin; Emrich, Christopher T; Tewary, Sweta; Pandya, Naushira

    2017-11-10

    We define, map, and analyze geodemographic patterns of socially and medically vulnerable older adults within the tri-county region of South Florida. We apply principal components analysis (PCA) to a set of previously identified indicators of social and medical vulnerability at the census tract level. We create and map age-stratified vulnerability scores using a geographic information system (GIS), and use spatial analysis techniques to identify patterns and interactions between social and medical vulnerability. Key factors contributing to social vulnerability in areas with higher numbers of older adults include age, large household size, and Hispanic ethnicity. Medical vulnerability in these same areas is driven by disease burden, access to emergency cardiac services, availability of nursing home and hospice beds, access to home health care, and available mental health services. Age-dependent areas of social vulnerability emerge in Broward County, whereas age-dependent areas of medical vulnerability emerge in Palm Beach County. Older-adult social and medical vulnerability interact differently throughout the study area. Spatial analysis of older adult social and medical vulnerability using PCA and GIS can help identify age-dependent pockets of vulnerability that are not easily identifiable in a populationwide analysis; improve our understanding of the dynamic spatial organization of health care, health care needs, access to care, and outcomes; and ultimately serve as a tool for health care planning. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Design and implementation of PAVEMON: A GIS web-based pavement monitoring system based on large amounts of heterogeneous sensors data

    Science.gov (United States)

    Shahini Shamsabadi, Salar

    A web-based PAVEment MONitoring system, PAVEMON, is a GIS oriented platform for accommodating, representing, and leveraging data from a multi-modal mobile sensor system. Stated sensor system consists of acoustic, optical, electromagnetic, and GPS sensors and is capable of producing as much as 1 Terabyte of data per day. Multi-channel raw sensor data (microphone, accelerometer, tire pressure sensor, video) and processed results (road profile, crack density, international roughness index, micro texture depth, etc.) are outputs of this sensor system. By correlating the sensor measurements and positioning data collected in tight time synchronization, PAVEMON attaches a spatial component to all the datasets. These spatially indexed outputs are placed into an Oracle database which integrates seamlessly with PAVEMON's web-based system. The web-based system of PAVEMON consists of two major modules: 1) a GIS module for visualizing and spatial analysis of pavement condition information layers, and 2) a decision-support module for managing maintenance and repair (Mℝ) activities and predicting future budget needs. PAVEMON weaves together sensor data with third-party climate and traffic information from the National Oceanic and Atmospheric Administration (NOAA) and Long Term Pavement Performance (LTPP) databases for an organized data driven approach to conduct pavement management activities. PAVEMON deals with heterogeneous and redundant observations by fusing them for jointly-derived higher-confidence results. A prominent example of the fusion algorithms developed within PAVEMON is a data fusion algorithm used for estimating the overall pavement conditions in terms of ASTM's Pavement Condition Index (PCI). PAVEMON predicts PCI by undertaking a statistical fusion approach and selecting a subset of all the sensor measurements. Other fusion algorithms include noise-removal algorithms to remove false negatives in the sensor data in addition to fusion algorithms developed for

  14. Multicriteria decision analysis based on analytic hierarchy process in GIS environment for siting nuclear power plant in Egypt

    International Nuclear Information System (INIS)

    Abudeif, A.M.; Abdel Moneim, A.A.; Farrag, A.F.

    2015-01-01

    Highlights: • The binary overlay method was used in Phase I through OR operator for selecting the candidate areas. • The WLC and AHP methods was used to screen and select the potential sites (phase II) in Arc GIS 10.1 software. • In phase III, four sites, all located on the North western coast and Red Sea, of highest scores were chosen as Candidate sites after eliminating the lowest score sites. • The AHP method was applied to select preferred candidate site and calculating the eigenvectors in Expert Choice Software Package. - Abstract: Due to increasing demand of electrical energy and freshwater in Egypt, it is safe to assume that the decision makers will turn to nuclear power as the feasible alternative for energy. However, as time goes by, fewer sites will be available and suitable for nuclear power plant development. Site selection is a key phase of the siting process of a nuclear plant and may significantly affect the safety and cost of the facility during its entire life cycle. The siting of nuclear power plants is one of multi-criteria problems, which makes it complex. Many interrelated factors affect the process. Six constraints and twenty-two factors corresponding to safety, environment and socio-economy were considered in the siting study presented in this paper. Multi-Criteria Decision Analysis was applied during the selection of nuclear power plants site using GIS software. Three spatial decision making models were applied in this paper during site selection stage. The binary overlay (Boolean logic) with Low Risk approach in which the logical OR operator is used to determine the candidate areas. All constraints were represented in binary maps, combined and a masking layer was created to eliminate the lands considered as constraints in Arc GIS Software. The 22 factors were represented in normalized maps after unifying all of them to 0–1 score scales based on the philosophy of suitability criteria (factors) using the Weighted Linear Combination

  15. Development of a GIS-Based Decision Support System for Diagnosis of River System Health and Restoration

    Directory of Open Access Journals (Sweden)

    Jihong Xia

    2014-10-01

    Full Text Available The development of a decision support system (DSS to inform policy making has been progressing rapidly. This paper presents a generic framework and the development steps of a decision tool prototype of geographic information systems (GIS-based decision support system of river health diagnosis (RHD-DSS. This system integrates data, calculation models, and human knowledge of river health status assessment, causal factors diagnosis, and restoration decision making to assist decision makers during river restoration and management in Zhejiang Province, China. Our RHD-DSS is composed of four main elements: the graphical user interface (GUI, the database, the model base, and the knowledge base. It has five functional components: the input module, the database management, the diagnostic indicators management, the assessment and diagnosis, and the visual result module. The system design is illustrated with particular emphasis on the development of the database, model schemas, diagnosis and analytical processing techniques, and map management design. Finally, the application of the prototype RHD-DSS is presented and implemented for Xinjiangtang River of Haining County in Zhejiang Province, China. This case study is used to demonstrate the advantages gained by the application of this system. We conclude that there is great potential for using the RHD-DSS to systematically manage river basins in order to effectively mitigate environmental issues. The proposed approach will provide river managers and designers with improved insight into river degradation conditions, thereby strengthening the assessment process and the administration of human activities in river management.

  16. Pedagogical Potential of a Web-Based GIS Application for Migration Data: A Preliminary Investigation in the Context of South Korea

    Science.gov (United States)

    Kim, Minsung; Kim, Kamyoung; Lee, Sang-Il

    2013-01-01

    This article examines the pedagogical potential of a Web-based GIS application, Population Migration Web Service (PMWS), in which students can examine population geography in an interactive and exploratory manner. This article introduces PMWS, a tailored, unique Internet GIS application that provides functions for visualizing spatial interaction…

  17. Predicting long-term average concentrations of traffic-related air pollutants using GIS-based information

    Science.gov (United States)

    Hochadel, Matthias; Heinrich, Joachim; Gehring, Ulrike; Morgenstern, Verena; Kuhlbusch, Thomas; Link, Elke; Wichmann, H.-Erich; Krämer, Ursula

    Global regression models were developed to estimate individual levels of long-term exposure to traffic-related air pollutants. The models are based on data of a one-year measurement programme including geographic data on traffic and population densities. This investigation is part of a cohort study on the impact of traffic-related air pollution on respiratory health, conducted at the westerly end of the Ruhr-area in North-Rhine Westphalia, Germany. Concentrations of NO 2, fine particle mass (PM 2.5) and filter absorbance of PM 2.5 as a marker for soot were measured at 40 sites spread throughout the study region. Fourteen-day samples were taken between March 2002 and March 2003 for each season and site. Annual average concentrations for the sites were determined after adjustment for temporal variation. Information on traffic counts in major roads, building densities and community population figures were collected in a geographical information system (GIS). This information was used to calculate different potential traffic-based predictors: (a) daily traffic flow and maximum traffic intensity of buffers with radii from 50 to 10 000 m and (b) distances to main roads and highways. NO 2 concentration and PM 2.5 absorbance were strongly correlated with the traffic-based variables. Linear regression prediction models, which involved predictors with radii of 50 to 1000 m, were developed for the Wesel region where most of the cohort members lived. They reached a model fit ( R2) of 0.81 and 0.65 for NO 2 and PM 2.5 absorbance, respectively. Regression models for the whole area required larger spatial scales and reached R2=0.90 and 0.82. Comparison of predicted values with NO 2 measurements at independent public monitoring stations showed a satisfactory association ( r=0.66). PM 2.5 concentration, however, was only slightly correlated and thus poorly predictable by traffic-based variables ( rGIS-based regression models offer a promising approach to assess individual levels of

  18. Integrating pipeline data management application and Google maps dataset on web based GIS application unsing open source technology Sharp Map and Open Layers

    Energy Technology Data Exchange (ETDEWEB)

    Wisianto, Arie; Sania, Hidayatus [PT PERTAMINA GAS, Bontang (Indonesia); Gumilar, Oki [PT PERTAMINA GAS, Jakarta (Indonesia)

    2010-07-01

    PT Pertamina Gas operates 3 pipe segments carrying natural gas from producers to PT Pupuk Kaltim in the Kalimantan area. The company wants to build a pipeline data management system consisting of pipeline facilities, inspections and risk assessments which would run on Geographic Information Systems (GIS) platforms. The aim of this paper is to present the integration of the pipeline data management system with GIS. A web based GIS application is developed using the combination of Google maps datasets with local spatial datasets. In addition, Open Layers is used to integrate pipeline data model and Google Map dataset into a single map display on Sharp Map. The GIS based pipeline data management system developed herein constitutes a low cost, powerful and efficient web based GIS solution.

  19. Explorations of the implementation of a parallel IDW interpolation algorithm in a Linux cluster-based parallel GIS

    Science.gov (United States)

    Huang, Fang; Liu, Dingsheng; Tan, Xicheng; Wang, Jian; Chen, Yunping; He, Binbin

    2011-04-01

    To design and implement an open-source parallel GIS (OP-GIS) based on a Linux cluster, the parallel inverse distance weighting (IDW) interpolation algorithm has been chosen as an example to explore the working model and the principle of algorithm parallel pattern (APP), one of the parallelization patterns for OP-GIS. Based on an analysis of the serial IDW interpolation algorithm of GRASS GIS, this paper has proposed and designed a specific parallel IDW interpolation algorithm, incorporating both single process, multiple data (SPMD) and master/slave (M/S) programming modes. The main steps of the parallel IDW interpolation algorithm are: (1) the master node packages the related information, and then broadcasts it to the slave nodes; (2) each node calculates its assigned data extent along one row using the serial algorithm; (3) the master node gathers the data from all nodes; and (4) iterations continue until all rows have been processed, after which the results are outputted. According to the experiments performed in the course of this work, the parallel IDW interpolation algorithm can attain an efficiency greater than 0.93 compared with similar algorithms, which indicates that the parallel algorithm can greatly reduce processing time and maximize speed and performance.

  20. Public Participation GIS

    DEFF Research Database (Denmark)

    Hansen, Henning Sten

    2004-01-01

    The protection and enhancement of the environment is the main aim of most environmental planning, and the use of geographic information as well as public participation can improve the quality of both the processes and the decisions. The current paper describes the role of web-based geographic...... information in environmental planning and gives an overview over the various approaches to public participation. The current advances in Web-based GIS in many countries contain great possibilities for supporting good governance based on information and knowledge on the one hand and active involvement...... of the citizens on the other hand. One important precondition for success in this field is a well-informed population with access to the Internet. The overall purpose of this paper is to give en overview of how to utilise geographic information and public participation as natural components in environmental...

  1. Using GIS-based methods of multicriteria analysis to construct socio-economic deprivation indices

    Directory of Open Access Journals (Sweden)

    Hayes Michael V

    2007-05-01

    Full Text Available Abstract Background Over the past several decades researchers have produced substantial evidence of a social gradient in a variety of health outcomes, rising from systematic differences in income, education, employment conditions, and family dynamics within the population. Social gradients in health are measured using deprivation indices, which are typically constructed from aggregated socio-economic data taken from the national census – a technique which dates back at least until the early 1970's. The primary method of index construction over the last decade has been a Principal Component Analysis. Seldom are the indices constructed from survey-based data sources due to the inherent difficulty in validating the subjectivity of the response scores. We argue that this very subjectivity can uncover spatial distributions of local health outcomes. Moreover, indication of neighbourhood socio-economic status may go underrepresented when weighted without expert opinion. In this paper we propose the use of geographic information science (GIS for constructing the index. We employ a GIS-based Order Weighted Average (OWA Multicriteria Analysis (MCA as a technique to validate deprivation indices that are constructed using more qualitative data sources. Both OWA and traditional MCA are well known and used methodologies in spatial analysis but have had little application in social epidemiology. Results A survey of British Columbia's Medical Health Officers (MHOs was used to populate the MCA-based index. Seven variables were selected and weighted based on the survey results. OWA variable weights assign both local and global weights to the index variables using a sliding scale, producing a range of variable scenarios. The local weights also provide leverage for controlling the level of uncertainty in the MHO response scores. This is distinct from traditional deprivation indices in that the weighting is simultaneously dictated by the original respondent scores

  2. Web-based GIS: the vector-borne disease airline importation risk (VBD-AIR) tool.

    Science.gov (United States)

    Huang, Zhuojie; Das, Anirrudha; Qiu, Youliang; Tatem, Andrew J

    2012-08-14

    Over the past century, the size and complexity of the air travel network has increased dramatically. Nowadays, there are 29.6 million scheduled flights per year and around 2.7 billion passengers are transported annually. The rapid expansion of the network increasingly connects regions of endemic vector-borne disease with the rest of the world, resulting in challenges to health systems worldwide in terms of vector-borne pathogen importation and disease vector invasion events. Here we describe the development of a user-friendly Web-based GIS tool: the Vector-Borne Disease Airline Importation Risk Tool (VBD-AIR), to help better define the roles of airports and airlines in the transmission and spread of vector-borne diseases. Spatial datasets on modeled global disease and vector distributions, as well as climatic and air network traffic data were assembled. These were combined to derive relative risk metrics via air travel for imported infections, imported vectors and onward transmission, and incorporated into a three-tier server architecture in a Model-View-Controller framework with distributed GIS components. A user-friendly web-portal was built that enables dynamic querying of the spatial databases to provide relevant information. The VBD-AIR tool constructed enables the user to explore the interrelationships among modeled global distributions of vector-borne infectious diseases (malaria. dengue, yellow fever and chikungunya) and international air service routes to quantify seasonally changing risks of vector and vector-borne disease importation and spread by air travel, forming an evidence base to help plan mitigation strategies. The VBD-AIR tool is available at http://www.vbd-air.com. VBD-AIR supports a data flow that generates analytical results from disparate but complementary datasets into an organized cartographical presentation on a web map for the assessment of vector-borne disease movements on the air travel network. The framework built provides a flexible

  3. Analysis of open source GIS software

    OpenAIRE

    Božnis, Andrius

    2006-01-01

    GIS is one of the most perspective information technology sciences sphere. GIS conjuncts the digital image analysis and data base systems. This makes GIS wide applicable and very high skills demanding system. There is a lot of commercial GIS software which is well advertised and which functionality is pretty well known, while open source software is forgotten. In this diploma work is made analysis of available open source GIS software on the Internet, in the scope of different projects interr...

  4. GIS-based Multi-criteria land suitability analysis for sustainable ...

    Indian Academy of Sciences (India)

    43

    of Tadla plain (Morocco) using geographic information system (GIS) and analytical ... clean water and air, reducing greenhouse gas emissions, preserving natural ... criteria decision making (MCDM) methods allowed having information from ...

  5. Modelling soil erosion risk based on RUSLE-3D using GIS in a ...

    Indian Academy of Sciences (India)

    2016-08-26

    watershed ... Click here to view fulltext PDF ... The RUSLE-3D (Revised Universal Soil Loss Equation-3D) model was implemented in geographic information system (GIS) for predicting the soil loss and the spatial patterns of soil ...

  6. Modelling soil erosion risk based on RUSLE-3D using GIS in a ...

    Indian Academy of Sciences (India)

    the point where runoff entered a well defined chan- ... and deep-incised drainage with steep and sharp hill slopes. Piedmont ... Water Information System (ILWIS) image process- ing and GIS ..... characterized as excessively drained, shallow to.

  7. pLog enterprise-enterprise GIS-based geotechnical data management system enhancements.

    Science.gov (United States)

    2015-12-01

    Recent eorts by the Louisiana Department of Transportation and Development (DOTD) and the : Louisiana Transportation Research Center (LTRC) have developed a Geotechnical Information : Database, with a Geographic Information System (GIS) interface....

  8. Development of an interactive GIS based work zone traffic control tool.

    Science.gov (United States)

    2013-08-01

    The purpose of this study was to include consideration for intersections into the previously created GIS traffic control planning tool. Available data for making intersection control calculations were collected and integrated into the design of the t...

  9. Automated riverine landscape characterization: GIS-based tools for watershed-scale research, assessment, and management.

    Science.gov (United States)

    Williams, Bradley S; D'Amico, Ellen; Kastens, Jude H; Thorp, James H; Flotemersch, Joseph E; Thoms, Martin C

    2013-09-01

    River systems consist of hydrogeomorphic patches (HPs) that emerge at multiple spatiotemporal scales. Functional process zones (FPZs) are HPs that exist at the river valley scale and are important strata for framing whole-watershed research questions and management plans. Hierarchical classification procedures aid in HP identification by grouping sections of river based on their hydrogeomorphic character; however, collecting data required for such procedures with field-based methods is often impractical. We developed a set of GIS-based tools that facilitate rapid, low cost riverine landscape characterization and FPZ classification. Our tools, termed RESonate, consist of a custom toolbox designed for ESRI ArcGIS®. RESonate automatically extracts 13 hydrogeomorphic variables from readily available geospatial datasets and datasets derived from modeling procedures. An advanced 2D flood model, FLDPLN, designed for MATLAB® is used to determine valley morphology by systematically flooding river networks. When used in conjunction with other modeling procedures, RESonate and FLDPLN can assess the character of large river networks quickly and at very low costs. Here we describe tool and model functions in addition to their benefits, limitations, and applications.

  10. MAPPING LOCAL CLIMATE ZONES WITH A VECTOR-BASED GIS METHOD

    Directory of Open Access Journals (Sweden)

    E. Lelovics

    2013-03-01

    Full Text Available In this study we determined Local Climate Zones in a South-Hungarian city, using vector-based and raster-based databases. We calculated seven of the originally proposed ten physical (geometric, surface cover and radiative properties for areas which are based on the mobile temperature measurement campaigns earlier carried out in this city.As input data we applied 3D building database (earlier created with photogrammetric methods, 2D road database, topographic map, aerial photographs, remotely sensed reflectance information from RapidEye satellite image and our local knowledge about the area. The values of the properties were calculated by GIS methods developed for this purpose.We derived for the examined areas and applied for classification sky view factor, mean building height, terrain roughness class, building surface fraction, pervious surface fraction, impervious surface fraction and albedo.Six built and one land cover LCZ classes could be detected with this method on our study area. From each class one circle area was selected, which is representative for that class. Their thermal reactions were examined with the application of mobile temperature measurement dataset. The comparison was made in cases, when the weather was clear and calm and the surface was dry. We found that compact built-in types have more temperature surplus than open ones, and midrise types also have more than lowrise ones. According to our primary results, these categories provide a useful opportunity for intra- and inter-urban comparisons.

  11. WISDOM: A GIS-based supply demand mapping tool for woodfuel management

    International Nuclear Information System (INIS)

    Masera, Omar; Ghilardi, Adrian; Drigo, Rudi; Angel Trossero, Miguel

    2006-01-01

    In this paper, it is argued that adequately assessing the implications of the current patterns of woodfuel production and use, and the sustainable potentials of woodfuel resources, requires a holistic view and a better knowledge of the spatial patterns of woodfuel supply and demand. There is a need to conduct multi-scale spatially explicit analyses of woodfuel supply and demand that are able to articulate local heterogeneity at the regional and national levels. Studies that provide full-country coverage and are based on consistent integration of data at lower geographical scales are woefully lacking. This paper describes the Woodfuel Integrated Supply/Demand Overview Mapping model (WISDOM). This is a GIS-based tool, aimed at analyzing woodfuel demand and supply spatial patterns from a new perspective that includes: (a) the assembling of existing but dispersed information into single data sets, (b) a modular integration of these data sets, based on the analysis of key variables associated with woodfuel demand and supply patterns, and (c) a multiple-scale and spatially explicit representation of the results, in order to rank or highlight areas in which several criteria of interest coincide. The final objective of WISDOM is to assess the sustainability of woodfuel as a renewable and widespread energy source, while supporting strategic planning and policy formulation. Three case studies for Mexico, Slovenia, and Senegal illustrate the practical implementation and innovative results of using WISDOM. (author)

  12. The Maryland Coastal Plain Aquifer Information System: A GIS-based tool for assessing groundwater resources

    Science.gov (United States)

    Andreasen, David C.; Nardi, Mark R.; Staley, Andrew W.; Achmad, Grufron; Grace, John W.

    2016-01-01

    Groundwater is the source of drinking water for ∼1.4 million people in the Coastal Plain Province of Maryland (USA). In addition, groundwater is essential for commercial, industrial, and agricultural uses. Approximately 0.757 × 109 L d–1 (200 million gallons/d) were withdrawn in 2010. As a result of decades of withdrawals from the coastal plain confined aquifers, groundwater levels have declined by as much as 70 m (230 ft) from estimated prepumping levels. Other issues posing challenges to long-term groundwater sustainability include degraded water quality from both man-made and natural sources, reduced stream base flow, land subsidence, and changing recharge patterns (drought) caused by climate change. In Maryland, groundwater supply is managed primarily by the Maryland Department of the Environment, which seeks to balance reasonable use of the resource with long-term sustainability. The chief goal of groundwater management in Maryland is to ensure safe and adequate supplies for all current and future users through the implementation of appropriate usage, planning, and conservation policies. To assist in that effort, the geographic information system (GIS)–based Maryland Coastal Plain Aquifer Information System was developed as a tool to help water managers access and visualize groundwater data for use in the evaluation of groundwater allocation and use permits. The system, contained within an ESRI ArcMap desktop environment, includes both interpreted and basic data for 16 aquifers and 14 confining units. Data map layers include aquifer and ­confining unit layer surfaces, aquifer extents, borehole information, hydraulic properties, time-series groundwater-level data, well records, and geophysical and lithologic logs. The aquifer and confining unit layer surfaces were generated specifically for the GIS system. The system also contains select groundwater-quality data and map layers that quantify groundwater and surface-water withdrawals. The aquifer

  13. Comparing the Performance of Commonly Available Digital Elevation Models in GIS-based Flood Simulation

    Science.gov (United States)

    Ybanez, R. L.; Lagmay, A. M. A.; David, C. P.

    2016-12-01

    With climatological hazards increasing globally, the Philippines is listed as one of the most vulnerable countries in the world due to its location in the Western Pacific. Flood hazards mapping and modelling is one of the responses by local government and research institutions to help prepare for and mitigate the effects of flood hazards that constantly threaten towns and cities in floodplains during the 6-month rainy season. Available digital elevation maps, which serve as the most important dataset used in 2D flood modelling, are limited in the Philippines and testing is needed to determine which of the few would work best for flood hazards mapping and modelling. Two-dimensional GIS-based flood modelling with the flood-routing software FLO-2D was conducted using three different available DEMs from the ASTER GDEM, the SRTM GDEM, and the locally available IfSAR DTM. All other parameters kept uniform, such as resolution, soil parameters, rainfall amount, and surface roughness, the three models were run over a 129-sq. kilometer watershed with only the basemap varying. The output flood hazard maps were compared on the basis of their flood distribution, extent, and depth. The ASTER and SRTM GDEMs contained too much error and noise which manifested as dissipated and dissolved hazard areas in the lower watershed where clearly delineated flood hazards should be present. Noise on the two datasets are clearly visible as erratic mounds in the floodplain. The dataset which produced the only feasible flood hazard map is the IfSAR DTM which delineates flood hazard areas clearly and properly. Despite the use of ASTER and SRTM with their published resolution and accuracy, their use in GIS-based flood modelling would be unreliable. Although not as accessible, only IfSAR or better datasets should be used for creating secondary products from these base DEM datasets. For developing countries which are most prone to hazards, but with limited choices for basemaps used in hazards

  14. Estuarine Sediment Deposition during Wetland Restoration: A GIS and Remote Sensing Modeling Approach

    Science.gov (United States)

    Newcomer, Michelle; Kuss, Amber; Kentron, Tyler; Remar, Alex; Choksi, Vivek; Skiles, J. W.

    2011-01-01

    Restoration of the industrial salt flats in the San Francisco Bay, California is an ongoing wetland rehabilitation project. Remote sensing maps of suspended sediment concentration, and other GIS predictor variables were used to model sediment deposition within these recently restored ponds. Suspended sediment concentrations were calibrated to reflectance values from Landsat TM 5 and ASTER using three statistical techniques -- linear regression, multivariate regression, and an Artificial Neural Network (ANN), to map suspended sediment concentrations. Multivariate and ANN regressions using ASTER proved to be the most accurate methods, yielding r2 values of 0.88 and 0.87, respectively. Predictor variables such as sediment grain size and tidal frequency were used in the Marsh Sedimentation (MARSED) model for predicting deposition rates for three years. MARSED results for a fully restored pond show a root mean square deviation (RMSD) of 66.8 mm (<1) between modeled and field observations. This model was further applied to a pond breached in November 2010 and indicated that the recently breached pond will reach equilibrium levels after 60 months of tidal inundation.

  15. Paper2GIS: A self-digitising, paper-based PPGIS

    OpenAIRE

    Huck, Jonathan; Dunning, Isobel; Lee, Pierre; Lowe, Thomas; Quek, Ervine; Weerasinghe, Sandarau; Wintie, Dominic

    2017-01-01

    This paper examines two established problems in public participatory GIS: affording participants the flexibility to represent geographical entities in a way that reflects how they think about the world; and the ‘digital divide’ in order to promote representative participation in locations that do not have good access to computing or the Internet. These two issues will be explored through the presentation of a novel prototype public participatory GIS software package, which allows the rapid au...

  16. GIS Data Based Automatic High-Fidelity 3D Road Network Modeling

    Science.gov (United States)

    Wang, Jie; Shen, Yuzhong

    2011-01-01

    3D road models are widely used in many computer applications such as racing games and driving simulations_ However, almost all high-fidelity 3D road models were generated manually by professional artists at the expense of intensive labor. There are very few existing methods for automatically generating 3D high-fidelity road networks, especially those existing in the real world. This paper presents a novel approach thai can automatically produce 3D high-fidelity road network models from real 2D road GIS data that mainly contain road. centerline in formation. The proposed method first builds parametric representations of the road centerlines through segmentation and fitting . A basic set of civil engineering rules (e.g., cross slope, superelevation, grade) for road design are then selected in order to generate realistic road surfaces in compliance with these rules. While the proposed method applies to any types of roads, this paper mainly addresses automatic generation of complex traffic interchanges and intersections which are the most sophisticated elements in the road networks

  17. A GIS-based numerical simulation of the March 2014 Oso landslide fluidized motion

    Science.gov (United States)

    Fukuoka, H.; Ogbonnaya, I.; Wang, C.

    2014-12-01

    Sliding and flowing are the major movement type after slope failures. Landslides occur when slope-froming material moves downhill after failing along a sliding surface. Most debris flows originally occur in the form of rainfall-induced landslides before they move into valley channel. Landslides that mobilize into debris flows usually are characterized by high-speed movement and long run-out distance and may present the greatest risk to human life. The 22 March 2014 Oso landslide is a typical case of landside transformint to debris flow. The landslide was triggered on the edge of a plateau about 200 m high composed of glacial sediments after excessive prolonged rainfall of 348 in March 2014. After its initiation, portions of the landslide materials transitioned into a rapidly moving debris flow which traveled long distances across the downslope floodplain. U.S. Geological Survey estimated the volume of the slide to be about 7 million m3, and it traveled about 1 km from the toe of the slope. The apparent friction angle measured by the energy line drawn from the crown of the head scarp to the toe of the deposits which reached largest distance, was only 5~6 degrees. we performed two numerical modeling to predicting the runout distance and to get insight into the behaviour of the landslide movement. One is GIS-based revised Hovland's 3D limit equilibrium model which is used to simulate the movement and stoppage of a landslide. In this research, sliding is defined by a slip surface which cuts through the slope, causing the mass of earth to move above it. The factor of safety will be calculated step by step during the sliding process simulation. Stoppage is defined by the factor of safety much greater than one and the velocity equal zero. The other is GIS-based depth-averaged 2D numerical model using a coupled viscous and Coulomb type law to simulate a debris flow from initiation to deposition. We compared our simulaiton results with the results of preliminary computer

  18. GIS-and Web-based Water Resource Geospatial Infrastructure for Oil Shale Development

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Wei [Colorado School of Mines, Golden, CO (United States); Minnick, Matthew [Colorado School of Mines, Golden, CO (United States); Geza, Mengistu [Colorado School of Mines, Golden, CO (United States); Murray, Kyle [Colorado School of Mines, Golden, CO (United States); Mattson, Earl [Colorado School of Mines, Golden, CO (United States)

    2012-09-30

    The Colorado School of Mines (CSM) was awarded a grant by the National Energy Technology Laboratory (NETL), Department of Energy (DOE) to conduct a research project en- titled GIS- and Web-based Water Resource Geospatial Infrastructure for Oil Shale Development in October of 2008. The ultimate goal of this research project is to develop a water resource geo-spatial infrastructure that serves as “baseline data” for creating solutions on water resource management and for supporting decisions making on oil shale resource development. The project came to the end on September 30, 2012. This final project report will report the key findings from the project activity, major accomplishments, and expected impacts of the research. At meantime, the gamma version (also known as Version 4.0) of the geodatabase as well as other various deliverables stored on digital storage media will be send to the program manager at NETL, DOE via express mail. The key findings from the project activity include the quantitative spatial and temporal distribution of the water resource throughout the Piceance Basin, water consumption with respect to oil shale production, and data gaps identified. Major accomplishments of this project include the creation of a relational geodatabase, automated data processing scripts (Matlab) for database link with surface water and geological model, ArcGIS Model for hydrogeologic data processing for groundwater model input, a 3D geological model, surface water/groundwater models, energy resource development systems model, as well as a web-based geo-spatial infrastructure for data exploration, visualization and dissemination. This research will have broad impacts of the devel- opment of the oil shale resources in the US. The geodatabase provides a “baseline” data for fur- ther study of the oil shale development and identification of further data collection needs. The 3D geological model provides better understanding through data interpolation and

  19. [Agricultural climate regionalization of dryland farming for potato in Yinshan based on GIS].

    Science.gov (United States)

    Miao, Bai-ling; Hou, Qiong; Liang, Cun-zhu

    2015-01-01

    Based on the meteorology dataset of 34 stations over the Yinshan area through the recent 30 years (1982-2010), we investigated the key environmental variables influencing potato yield using the correlation and regression methods. Two environmental variables, including the mean temperature difference, precipitation during the growing season, were selected as the major indexes for determining the suitable area for planting potato. Using the GIS-based small grid calculation model, we interpolated these two major environmental variables and produced the climatic map for potato in Yinshan area. The results showed the high potato yield area located in Qianshan and southern Houshan, and the medium-yield division was mainly concentrated in the central Houshan and north-west Qianshan, the low-yield division was distributed mainly in northern Yinshan. Moreover, this study examined the spatial patterns of potato production, and evaluated the stability of potato yield by combining the relative variability of potato yield. This study could provide valuable references for planting potato in Yinshan area.

  20. A GIS-Based 3D Simulation for Occupant Evacuation in a Building

    Institute of Scientific and Technical Information of China (English)

    TANG Fangqin; ZHANG Xin

    2008-01-01

    The evacuation efficiency of building plans is of obvious importance to the public safety.The cem- plexity of building plans,however,makes it difficult for the efficiency evaluation.This paper presents a com- putational model AutoEscape,which can simulate the evacuation process for any given occupant distribu. Uon in buildings.Designed as an extensible multi-level structure, the model constructs the geometry level and occupant level and establishes the interactions between levels.The GIS-based environmental analysis is realized to automatically generate the geometric representation and formulate the cognition of agents. The multi-agent based technology is employed to simulate the crowd behaviom with autonomously acting individuals.A visualization component,which provides 3D free observations for the simulation process,is developed on the platform of OGRE and integrated into the system interface in form of ActiveX control.Fi- nally,a case study has been conducted and the results have been compared with the results of an existing model to show the reliability and capacity of AutoEscape simulation.

  1. GIS-based bivariate statistical techniques for groundwater potential analysis (an example of Iran)

    Science.gov (United States)

    Haghizadeh, Ali; Moghaddam, Davoud Davoudi; Pourghasemi, Hamid Reza

    2017-12-01

    Groundwater potential analysis prepares better comprehension of hydrological settings of different regions. This study shows the potency of two GIS-based data driven bivariate techniques namely statistical index (SI) and Dempster-Shafer theory (DST) to analyze groundwater potential in Broujerd region of Iran. The research was done using 11 groundwater conditioning factors and 496 spring positions. Based on the ground water potential maps (GPMs) of SI and DST methods, 24.22% and 23.74% of the study area is covered by poor zone of groundwater potential, and 43.93% and 36.3% of Broujerd region is covered by good and very good potential zones, respectively. The validation of outcomes displayed that area under the curve (AUC) of SI and DST techniques are 81.23% and 79.41%, respectively, which shows SI method has slightly a better performance than the DST technique. Therefore, SI and DST methods are advantageous to analyze groundwater capacity and scrutinize the complicated relation between groundwater occurrence and groundwater conditioning factors, which permits investigation of both systemic and stochastic uncertainty. Finally, it can be realized that these techniques are very beneficial for groundwater potential analyzing and can be practical for water-resource management experts.

  2. GIS - Based data presentation and interactive communication system for public involvement in EIA

    International Nuclear Information System (INIS)

    Oprea, I.; Oprea, M.; Guta, V.; Pirvu, V.

    2001-01-01

    The data presentation and interactive communication system has as main task to integrate technical and administrative information, as well as to ensure an efficient public participation. The system can achieve desired inter-operability between specialists, government and public in decision-making and environmental impact assessment (EIA). It incorporates different modules relative to specific types of parameters and authorities involved. The GIS-based system provides mapping, database, automatic information collection and advanced presentation techniques. It includes a graphically oriented executive support, which has the ability to present information by geographical representation of the zones on the map. The public opinion is taking into account by consideration of alternatives and providing access to the monitoring of environmental effects. The system offers an effective way to avoid negative reactions by interactive communication based on real-time information exchange. The system can be integrated into national or international management systems, being a useful tool for an efficient communication, handling and exchanging a vast amount of information. (authors)

  3. Assessing Essential Qualities of Urban Space with Emotional and Visual Data Based on GIS Technique

    Directory of Open Access Journals (Sweden)

    Xin Li

    2016-11-01

    Full Text Available Finding a method to evaluate people’s emotional responses to urban spaces in a valid and objective way is fundamentally important for urban design practices and related policy making. Analysis of the essential qualities of urban space could be made both more effective and more accurate using innovative information techniques that have become available in the era of big data. This study introduces an integrated method based on geographical information systems (GIS and an emotion-tracking technique to quantify the relationship between people’s emotional responses and urban space. This method can evaluate the degree to which people’s emotional responses are influenced by multiple urban characteristics such as building shapes and textures, isovist parameters, visual entropy, and visual fractals. The results indicate that urban spaces may influence people’s emotional responses through both spatial sequence arrangements and shifting scenario sequences. Emotional data were collected with body sensors and GPS devices. Spatial clustering was detected to target effective sampling locations; then, isovists were generated to extract building textures. Logistic regression and a receiver operating characteristic analysis were used to determine the key isovist parameters and the probabilities that they influenced people’s emotion. Finally, based on the results, we make some suggestions for design professionals in the field of urban space optimization.

  4. GIS-Based Terrain Analysis of Balakot Region after Occurred Landslide Disaster in October 2005

    Directory of Open Access Journals (Sweden)

    Abdul Salam Soomro

    2011-10-01

    Full Text Available The landslide susceptibility models require the appropriate and reliable terrain analytical based study of the landslides prone areas using SRTM (Shuttle Radar Topography Mission data, based on certain GIS (Geographical Information Systems and remote sensing techniques. This research paper focuses on the analysis of the terrain conditions of Balakot region. The analytical operations have been used in the different phases: (i Extracting the study area from the large data; (ii preparing it into grid format; (iii developing contour lines with certain contour intervals (iv Re-classification of it into required classes and (v preparation of digital terrain model with its different required various supplementary models for analyzing the terrain conditions of the study area located in Mansehra district, north part of Pakistan where the great earthquake induced landslide disaster occurred in October 2005. This analytical study has notified the different sensitive issues concerning to the critical slope angles, variation in the elevation and the surface of study area. The various distinctions in the terrain phenomenon validate the occurred and probable landslides because the topography of such study area can predict the various probable landslide hazards, vulnerability and risk threats in the region again. This analytical study can be useful for the decisive authorities by becoming pro-active to rebuild the region to mitigate the expected losses from the natural disaster.

  5. A GIS/Remote Sensing-based methodology for groundwater potentiality assessment in Tirnavos area, Greece

    Science.gov (United States)

    Oikonomidis, D.; Dimogianni, S.; Kazakis, N.; Voudouris, K.

    2015-06-01

    The aim of this paper is to assess the groundwater potentiality combining Geographic Information Systems and Remote Sensing with data obtained from the field, as an additional tool to the hydrogeological research. The present study was elaborated in the broader area of Tirnavos, covering 419.4 km2. The study area is located in Thessaly (central Greece) and is crossed by two rivers, Pinios and Titarisios. Agriculture is one of the main elements of Thessaly's economy resulting in intense agricultural activity and consequently increased exploitation of groundwater resources. Geographic Information Systems (GIS) and Remote Sensing (RS) were used in order to create a map that depicts the likelihood of existence of groundwater, consisting of five classes, showing the groundwater potentiality and ranging from very high to very low. The extraction of this map is based on the study of input data such as: rainfall, potential recharge, lithology, lineament density, slope, drainage density and depth to groundwater. Weights were assigned to all these factors according to their relevance to groundwater potential and eventually a map based on weighted spatial modeling system was created. Furthermore, a groundwater quality suitability map was illustrated by overlaying the groundwater potentiality map with the map showing the potential zones for drinking groundwater in the study area. The results provide significant information and the maps could be used from local authorities for groundwater exploitation and management.

  6. A METEOROLOGICAL RISK ASSESSMENT METHOD FOR POWER LINES BASED ON GIS AND MULTI-SENSOR INTEGRATION

    Directory of Open Access Journals (Sweden)

    Z. Lin

    2016-06-01

    Full Text Available Power lines, exposed in the natural environment, are vulnerable to various kinds of meteorological factors. Traditional research mainly deals with the influence of a single meteorological condition on the power line, which lacks of comprehensive effects evaluation and analysis of the multiple meteorological factors. In this paper, we use multiple meteorological monitoring data obtained by multi-sensors to implement the meteorological risk assessment and early warning of power lines. Firstly, we generate meteorological raster map from discrete meteorological monitoring data using spatial interpolation. Secondly, the expert scoring based analytic hierarchy process is used to compute the power line risk index of all kinds of meteorological conditions and establish the mathematical model of meteorological risk. By adopting this model in raster calculator of ArcGIS, we will have a raster map showing overall meteorological risks for power line. Finally, by overlaying the power line buffer layer to that raster map, we will get to know the exact risk index around a certain part of power line, which will provide significant guidance for power line risk management. In the experiment, based on five kinds of observation data gathered from meteorological stations in Guizhou Province of China, including wind, lightning, rain, ice, temperature, we carry on the meteorological risk analysis for the real power lines, and experimental results have proved the feasibility and validity of our proposed method.

  7. [Study on ecological suitability regionalization of Corni Fructus based on Maxent and ArcGIS model].

    Science.gov (United States)

    Zhang, Fei; Chen, Sui-Qing; Wang, Li-Li; Zhang, Tao; Zhang, Xiao-Bo; Zhu, Shou-Dong

    2017-08-01

    Through planting regionalization the scientific basis for planting area of high-quality medicinal materials was predicted. Through interview investigation and field survey, the distribution information of Corni Fructus in China was collected,and 89 sampling point from 14 producing areas were collected. Climate and topography of Corni Fructus were analyzed, the ecological adaptability of study was conducted based on ArcGIS and Maxent. Different suitability grade at potential areas and regionalization map were formulated. There are nine ecological factors affecting the growth of Corni Fructus, for example precipitation in November and March and vegetation type. The results showed that the most suitable habitats are Henan, Shaanxi, Zhejiang, Chongqing, Hubei, Sichuan, Anhui, Hunan and Shandong province. Using the spatial analysis method,the study not only illustrates the most suitable for the surroundings of Corni Fructus,but also provides a scientific reference for wild resource tending, introduction and cultivation, and artificial planting base and directing production layout. Copyright© by the Chinese Pharmaceutical Association.

  8. Development of a web GIS application for emissions inventory spatial allocation based on open source software tools

    Science.gov (United States)

    Gkatzoflias, Dimitrios; Mellios, Giorgos; Samaras, Zissis

    2013-03-01

    Combining emission inventory methods and geographic information systems (GIS) remains a key issue for environmental modelling and management purposes. This paper examines the development of a web GIS application as part of an emission inventory system that produces maps and files with spatial allocated emissions in a grid format. The study is not confined in the maps produced but also presents the features and capabilities of a web application that can be used by every user even without any prior knowledge of the GIS field. The development of the application was based on open source software tools such as MapServer for the GIS functions, PostgreSQL and PostGIS for the data management and HTML, PHP and JavaScript as programming languages. In addition, background processes are used in an innovative manner to handle the time consuming and computational costly procedures of the application. Furthermore, a web map service was created to provide maps to other clients such as the Google Maps API v3 that is used as part of the user interface. The output of the application includes maps in vector and raster format, maps with temporal resolution on daily and hourly basis, grid files that can be used by air quality management systems and grid files consistent with the European Monitoring and Evaluation Programme Grid. Although the system was developed and validated for the Republic of Cyprus covering a remarkable wide range of pollutant and emissions sources, it can be easily customized for use in other countries or smaller areas, as long as geospatial and activity data are available.

  9. A Modular GIS-Based Software Architecture for Model Parameter Estimation using the Method of Anchored Distributions (MAD)

    Science.gov (United States)

    Ames, D. P.; Osorio-Murillo, C.; Over, M. W.; Rubin, Y.

    2012-12-01

    The Method of Anchored Distributions (MAD) is an inverse modeling technique that is well-suited for estimation of spatially varying parameter fields using limited observations and Bayesian methods. This presentation will discuss the design, development, and testing of a free software implementation of the MAD technique using the open source DotSpatial geographic information system (GIS) framework, R statistical software, and the MODFLOW groundwater model. This new tool, dubbed MAD-GIS, is built using a modular architecture that supports the integration of external analytical tools and models for key computational processes including a forward model (e.g. MODFLOW, HYDRUS) and geostatistical analysis (e.g. R, GSLIB). The GIS-based graphical user interface provides a relatively simple way for new users of the technique to prepare the spatial domain, to identify observation and anchor points, to perform the MAD analysis using a selected forward model, and to view results. MAD-GIS uses the Managed Extensibility Framework (MEF) provided by the Microsoft .NET programming platform to support integration of different modeling and analytical tools at run-time through a custom "driver." Each driver establishes a connection with external programs through a programming interface, which provides the elements for communicating with core MAD software. This presentation gives an example of adapting the MODFLOW to serve as the external forward model in MAD-GIS for inferring the distribution functions of key MODFLOW parameters. Additional drivers for other models are being developed and it is expected that the open source nature of the project will engender the development of additional model drivers by 3rd party scientists.

  10. Citizen, Science, Highways, and Wildlife: Using a Web-based GIS to Engage Citizens in Collecting Wildlife Information

    Directory of Open Access Journals (Sweden)

    Tracy Lee

    2006-06-01

    Full Text Available Road Watch in the Pass is a citizen-science project that engages local citizens in reporting wildlife observations along a 44-km stretch of Highway 3 through Crowsnest Pass in southwestern Alberta, Canada. The numbers of wildlife vehicle collisions and a recent proposal to expand the highway have raised concerns from both human safety and wildlife conservation perspectives. Through the use of a web-based GIS, interested citizens can contribute information that will be instrumental in making final decisions concerning measures to mitigate the effects of highway expansion. Currently, 58 people have contributed over 713 observations to Road Watch. We performed a preliminary comparison of 11 months of Road Watch observations and wildlife mortality data for the same time period to demonstrate that the use of citizen science not only augments more conventional approaches, but also results in the emergence of new knowledge and insights. A Kappa index of agreement of 14% indicates poor agreement between the data sets, highlighting that wildlife successfully cross the highway in areas not identified by the wildlife mortality data. This has important implications for design and mitigation efforts for Highway 3 and other roadways.

  11. GIS-Based Synthetic Measurement of Sustainable Development in Loess Plateau Ecologically Fragile Area—Case of Qingyang, China

    Directory of Open Access Journals (Sweden)

    Chenyu Lu

    2015-02-01

    Full Text Available Synthetic measurement of regional sustainable development has been one of the key issues in the research field of sustainability. In this paper, Qingyang City located in the Loess Plateau ecologically fragile area of Northwest China is used for a case study, and the present study aims to investigate the degree of sustainable development by conducting temporal- and spatial-scale based analysis, with the assessment index system, assessment model and GIS approach well integrated. The results show that the development pattern of Qingyang generally fits the mode of unsustainable development, even in the presence of certain levels of spatial differences. The sustainable development state in ecologically fragile area of China’s Loess Plateau is non-optimistic, which is an uncoordinated status among subsystems of regional sustainable development. Although the level and tendency of regional sustainable development keeps increasing, such enhancement is abnormal. With the rapid deterioration of environmental and natural resources, their inhibitory effect on the economy and society would expand, eventually leading to the slow development rate or the recession of the entire system. The only solution is to change the traditional mode of economic development, to follow the guide of ecological economic conception so that the goal of achieving regional sustainable development strategies could be met ultimately. Meanwhile, the characteristics of different regions should be taken into account in order to achieve optimal spatial structure.

  12. Exploring Spatiotemporal Trends in Commercial Fishing Effort of an Abalone Fishing Zone: A GIS-Based Hotspot Model

    Science.gov (United States)

    Jalali, M. Ali; Ierodiaconou, Daniel; Gorfine, Harry; Monk, Jacquomo; Rattray, Alex

    2015-01-01

    Assessing patterns of fisheries activity at a scale related to resource exploitation has received particular attention in recent times. However, acquiring data about the distribution and spatiotemporal allocation of catch and fishing effort in small scale benthic fisheries remains challenging. Here, we used GIS-based spatio-statistical models to investigate the footprint of commercial diving events on blacklip abalone (Haliotis rubra) stocks along the south-west coast of Victoria, Australia from 2008 to 2011. Using abalone catch data matched with GPS location we found catch per unit of fishing effort (CPUE) was not uniformly spatially and temporally distributed across the study area. Spatial autocorrelation and hotspot analysis revealed significant spatiotemporal clusters of CPUE (with distance thresholds of 100’s of meters) among years, indicating the presence of CPUE hotspots focused on specific reefs. Cumulative hotspot maps indicated that certain reef complexes were consistently targeted across years but with varying intensity, however often a relatively small proportion of the full reef extent was targeted. Integrating CPUE with remotely-sensed light detection and ranging (LiDAR) derived bathymetry data using generalized additive mixed model corroborated that fishing pressure primarily coincided with shallow, rugose and complex components of reef structures. This study demonstrates that a geospatial approach is efficient in detecting patterns and trends in commercial fishing effort and its association with seafloor characteristics. PMID:25992800

  13. Exploring Spatiotemporal Trends in Commercial Fishing Effort of an Abalone Fishing Zone: A GIS-Based Hotspot Model.

    Directory of Open Access Journals (Sweden)

    M Ali Jalali

    Full Text Available Assessing patterns of fisheries activity at a scale related to resource exploitation has received particular attention in recent times. However, acquiring data about the distribution and spatiotemporal allocation of catch and fishing effort in small scale benthic fisheries remains challenging. Here, we used GIS-based spatio-statistical models to investigate the footprint of commercial diving events on blacklip abalone (Haliotis rubra stocks along the south-west coast of Victoria, Australia from 2008 to 2011. Using abalone catch data matched with GPS location we found catch per unit of fishing effort (CPUE was not uniformly spatially and temporally distributed across the study area. Spatial autocorrelation and hotspot analysis revealed significant spatiotemporal clusters of CPUE (with distance thresholds of 100's of meters among years, indicating the presence of CPUE hotspots focused on specific reefs. Cumulative hotspot maps indicated that certain reef complexes were consistently targeted across years but with varying intensity, however often a relatively small proportion of the full reef extent was targeted. Integrating CPUE with remotely-sensed light detection and ranging (LiDAR derived bathymetry data using generalized additive mixed model corroborated that fishing pressure primarily coincided with shallow, rugose and complex components of reef structures. This study demonstrates that a geospatial approach is efficient in detecting patterns and trends in commercial fishing effort and its association with seafloor characteristics.

  14. Cost optimization of a real-time GIS-based management system for hazardous waste transportation.

    Science.gov (United States)

    Zhu, Yun; Lin, Che-Jen; Zhong, Yilong; Zhou, Qing; Lin, Che-Jen; Chen, Chunyi

    2010-08-01

    In this paper, the design and cost analysis of a real-time, geographical information system (GIS) based management system for hazardous waste transportation are described. The implementation of such a system can effectively prevent illegal dumping and perform emergency responses during the transportation of hazardous wastes. A case study was conducted in Guangzhou, China to build a small-scale, real-time management system for waste transportation. Two alternatives were evaluated in terms of system capability and cost structure. Alternative I was the building of a complete real-time monitoring and management system in a governing agency; whereas alternative II was the combination of the existing management framework with a commercial Telematics service to achieve the desired level of monitoring and management. The technological framework under consideration included locating transportation vehicles using a global positioning system (GPS), exchanging vehicle location data via the Internet and Intranet, managing hazardous waste transportation using a government management system and responding to emergencies during transportation. Analysis of the cost structure showed that alternative II lowered the capital and operation cost by 38 and 56% in comparison with alternative I. It is demonstrated that efficient management can be achieved through integration of the existing technological components with additional cost benefits being achieved by streamlined software interfacing.

  15. [Evaluation of ecosystem resilience in the regions across Qinghai-Tibet railway based on GIS].

    Science.gov (United States)

    Gao, Jiang-bo; Zhao, Zhi-qiang; Li, Shuang-cheng

    2008-11-01

    Based on GIS technique and the methods of mean-squared deviation weight decision and catastrophe progression, a more clear definition and associated evaluation for ecosystem resilience were given, with a case study in the regions across Qinghai-Tibet railway by using the indices of plant community coverage, species diversity, and biomass. It was shown that the areas with high ecosystem resilience were mainly located in the Qilian Mountain meadow grassland, Huangshui Valley needle-leaved and deciduous broad-leaved forest, and south Tanggula Mountain kobresia swamp meadow, while those with the lowest resilience were in the central part of Qaidam Basin, and the Kunlun Mountains. Most areas in the regions had higher or medium ecosystem resilience, with a trend of that in the south of Kunlun Mountains, the resilience in the north of the railway was lower, while in the east of Qaidam Basin (especially in the Qinghai Lake area), the resilience was lower in the south than in the north of the railway. Through the evaluation of ecosystem resilience, the key issues in the process of ecological resilience could be found, and corresponding effective measures would be pointed out to manage alpine ecosystems. Moreover, combining with the evaluation of vulnerability, scientific basis for regional development could be provided to avoid or mitigate the negative effects of human activities on eco-environment.

  16. A method for evaluating photovoltaic potential in China based on GIS platform

    Science.gov (United States)

    Wang, L. Z.; Tan, H. W.; Ji, L.; Wang, D.

    2017-11-01

    Solar photovoltaic systems are commonly utilized in China. However, the associated research is still lack of its resource potential analysis in all regions in China. Based on the existed data about solar radiation and system conversion efficiency data, a new method for distributed photovoltaic potential assessment has been presented. The experiment of three kinds of solar photovoltaic system has been set up for the purpose of analyzing the relationship between conversion efficiency and environmental parameters. This paper fits the relationship between conversion efficiency and solar radiation intensity. This method takes into account the amount of solar radiation that is effectively generated and drives away the weak values. With the spatial analysis function of geographic information system (GIS) platform, frequency distribution of solar radiation intensity and PV potential in China can be derived. Furthermore, analytical results show that monocrystalline-silicon PV generation in the north-western and northern areas have reached a level of more than 200 kWh/(m2.a), making those areas be suitable for the development of PV system. However, the potential for southwest areas reaches a level of only 130 kWh/(m2.a). This paper can provide the baseline reference for solar energy development planning.

  17. The research on regional conservation planning of urban historical and cultural areas based on GIS

    Science.gov (United States)

    Li, Shangli; Xu, Jian; Li, Qian

    2017-06-01

    With the rapid economic development and the growth of population happening in the urban historical and cultural areas, heritage and historical buildings along with their natural and artificial surrounding environments are suffering constructive destruction. Due to the lack of precise partition of protection region and construction control region in the local cultural relics protection law, traditional regional conservation planning cannot engaged with the urban controllability detailed planning very well. According to the several protection regulations about heritage and historical buildings from latest laws, we choose Baxian Temple area to study on the improvments of traditional regional conservation planning. The technical methods of this study mainly rely on GIS, which can complete the fundamental work of each stage. With the analytic hierarchy process(AHP), the comprehensive architectural value assessments can be calculated according to the investigation results. Based on the calculation results and visual corridor analysis, the precise range of protection region and construction control region can be decided and the specific protection measures can be formulated.

  18. GIS-based health assessment of the marine ecosystem in Laizhou Bay, China.

    Science.gov (United States)

    Song, Debin; Gao, Zhiqiang; Zhang, Hua; Xu, Fuxiang; Zheng, Xiangyu; Ai, Jinquan; Hu, Xiaoke; Huang, Guopei; Zhang, Haibo

    2017-12-15

    According to 2014-2016 monitoring data, an assessment index system including water quality, depositional environment and ecosystem was built to evaluate the health statue of marine ecosystem in the Laizhou Bay using analytic hierarchy process (AHP) method. The results, spatialized in ArcGIS software, show: while the comprehensive ecological health index is 0.62, the ecological environmental quality in the Laizhou Bay is in a sub-healthy state; the unhealthy area is mainly concentrated in southwestern inshore region, and impacted by serious environmental problems, such as water eutrophication and heavy metal pollution; the northwestern and southeastern inshore regions are in a sub-healthy state, while the eastern inshore and northern areas are in the healthiest state. The land-based pollutants that discharge into the sea may be the leading factors that are causing ecological environment deterioration in the Laizhou Bay, and the reclamation work ongoing around the port has exacerbated the ecological risk. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. GIS-based models for ambient PM exposure and health impact assessment for the UK

    International Nuclear Information System (INIS)

    Stedman, John R; Grice, Susannah; Kent, Andrew; Cooke, Sally

    2009-01-01

    GIS-based models have been developed to map ambient PM 10 and PM 25 mass concentrations across the UK. The resulting maps are used for the assessments of air quality required by the EU ambient air quality directives, health impact assessment and the development of UK air quality policy. Maps are presented for 2006 along with projections to 2020. The largest single contribution to the UK population-weighted mean annual mean background concentrations of PM 10 in 2006 is estimated to be from secondary PM (43%), followed by the contribution from primary PM (24%). Concentrations are predicted to decline by 15% for PM 10 and 13% for PM 25 over the period from 2006 to 2020. The extent of exceedence of the 24-hour limit value is predicted to decline from 1.9% to 0.1% of urban major roads over the same period. The potential health benefits of reductions in ambient PM are large. A reduction in concentration of 0.93 μg m -3 as a result of a possible package of measures has been estimated within the UK Air Quality Strategy to result in a reduction in life years lost of approximately 2 - 4 million over a period of 100 years.

  20. Simulation and Evaluation of Low Impact Development of Urban Residential District Based on SWMM and GIS

    Science.gov (United States)

    Huang, Tielan; Wang, Yunpeng; Zhang, Jinlan

    2017-07-01

    In this study, simulation and evaluation of low impact development in resident district was carried out based on Storm Water Management Model (SWMM) and GIS method. In the evaluation model, we added 3 kinds of low impact development facilities, namely permeable pavement, rainwater garden, and green roof. These facilities are used alone or in combination. The model was run under five different rainfall reappearing periods. The simulation results using low impact development facilities were compared with simulation results under the current situation and undeveloped state. The results show that the total amount of runoff was greatly reduced by using various types of low impact development facilities in the urban residential district. The maximum reduction rate was using permeable pavement, reached 29.9%, followed was using rainwater garden, and the worst was using green roof. The lowest cost of reduction of the total amount of runoff was using permeable pavement, the followed was using rainwater garden, and the highest was using green roof. The combination scheme of various low impact development facilities has the highest efficiency of reducing total amount of runoff, and the lowest cost, which considering of the actual situation of the study area. The study indicated that application of low impact development facilities can reduce surface runoff effectively, which should be a useful way for prevention of urban waterlogging.

  1. Automation of GIS-Based Population Data-Collection for Transportation Risk Analysis

    International Nuclear Information System (INIS)

    MILLS, G. SCOTT; NEUHAUSER, SIEGLINDE

    1999-01-01

    Estimation of the potential radiological risks associated with highway transport of radioactive materials (RAM) requires input data describing population densities adjacent to all portions of the route to be traveled. Previously, aggregated risks for entire multi-state routes were adequately estimated from population data with low geographic resolution. Current demands for geographically-specific risk estimates require similar increases in resolution of population density adjacent to route segments. With the advent of commercial geographic information systems (GISs) and databases describing highways, U.S. Census Blocks, and other information that is geographically distributed, it became feasible to determine and tabulate population characteristics along transportation routes with 1-kilometer resolution. This report describes an automated method of collecting population data adjacent to route segments (for calculation of incident-free doses) based on a commercial GIS. It also describes a statistical method of resolving remaining resolution issues, and an adaptation of the automation method to collection of data on population under a hypothetical plume of contamination resulting from a potential transportation accident

  2. Development of a GIS-based failure investigation system for highway soil slopes

    Science.gov (United States)

    Ramanathan, Raghav; Aydilek, Ahmet H.; Tanyu, Burak F.

    2015-06-01

    A framework for preparation of an early warning system was developed for Maryland, using a GIS database and a collective overlay of maps that highlight highway slopes susceptible to soil slides or slope failures in advance through spatial and statistical analysis. Data for existing soil slope failures was collected from geotechnical reports and field visits. A total of 48 slope failures were recorded and analyzed. Six factors, including event precipitation, geological formation, land cover, slope history, slope angle, and elevation were considered to affect highway soil slope stability. The observed trends indicate that precipitation and poor surface or subsurface drainage conditions are principal factors causing slope failures. 96% of the failed slopes have an open drainage section. A majority of the failed slopes lie in regions with relatively high event precipitation ( P>200 mm). 90% of the existing failures are surficial erosion type failures, and only 1 out of the 42 slope failures is deep rotational type failure. More than half of the analyzed slope failures have occurred in regions having low density land cover. 46% of failures are on slopes with slope angles between 20° and 30°. Influx of more data relating to failed slopes should give rise to more trends, and thus the developed slope management system will aid the state highway engineers in prudential budget allocation and prioritizing different remediation projects based on the literature reviewed on the principles, concepts, techniques, and methodology for slope instability evaluation (Leshchinsky et al., 2015).

  3. THE UNCERTAINTIES ON THE GIS BASED LAND SUITABILITY ASSESSMENT FOR URBAN AND RURAL PLANNING

    Directory of Open Access Journals (Sweden)

    H. Liu

    2017-09-01

    Full Text Available The majority of the research on the uncertainties of spatial data and spatial analysis focuses on some specific data feature or analysis tool. Few have accomplished the uncertainties of the whole process of an application like planning, making the research of uncertainties detached from practical applications. The paper discusses the uncertainties of the geographical information systems (GIS based land suitability assessment in planning on the basis of literature review. The uncertainties considered range from index system establishment to the classification of the final result. Methods to reduce the uncertainties arise from the discretization of continuous raster data and the index weight determination are summarized. The paper analyzes the merits and demerits of the “Nature Breaks” method which is broadly used by planners. It also explores the other factors which impact the accuracy of the final classification like the selection of class numbers, intervals and the autocorrelation of the spatial data. In the conclusion part, the paper indicates that the adoption of machine learning methods should be modified to integrate the complexity of land suitability assessment. The work contributes to the application of spatial data and spatial analysis uncertainty research on land suitability assessment, and promotes the scientific level of the later planning and decision-making.

  4. GIS-Based Evaluation of Spatial Interactions by Geographic Disproportionality of Industrial Diversity

    Directory of Open Access Journals (Sweden)

    Jemyung Lee

    2017-11-01

    Full Text Available Diversity of regional industry is regarded as a key factor for regional development, as it has a positive relationship with economic stability, which attracts population. This paper focuses on how the spatial imbalance of industrial diversity contributes to the population change caused by inter-regional migration. This paper introduces a spatial interaction model for the Geographic Information System (GIS-based simulation of the spatial interactions to evaluate the demographic attraction force. The proposed model adopts the notions of gravity, entropy, and virtual work. An industrial classification by profit level is introduced and its diversity is quantified with the entropy of information theory. The introduced model is applied to the cases of 207 regions in South Korea. Spatial interactions are simulated with an optimized model and their resultant forces, the demographic attraction forces, are compared with observed net migration for verification. The results show that the evaluated attraction forces from industrial diversity have a very significant, positive, and moderate relationship with net migration, while other conventional factors of industry, population, economy, and the job market do not. This paper concludes that the geographical quality of industrial diversity has positive and significant effects on population change by migration.

  5. Comparing GIS-based habitat models for applications in EIA and SEA

    International Nuclear Information System (INIS)

    Gontier, Mikael; Moertberg, Ulla; Balfors, Berit

    2010-01-01

    Land use changes, urbanisation and infrastructure developments in particular, cause fragmentation of natural habitats and threaten biodiversity. Tools and measures must be adapted to assess and remedy the potential effects on biodiversity caused by human activities and developments. Within physical planning, environmental impact assessment (EIA) and strategic environmental assessment (SEA) play important roles in the prediction and assessment of biodiversity-related impacts from planned developments. However, adapted prediction tools to forecast and quantify potential impacts on biodiversity components are lacking. This study tested and compared four different GIS-based habitat models and assessed their relevance for applications in environmental assessment. The models were implemented in the Stockholm region in central Sweden and applied to data on the crested tit (Parus cristatus), a sedentary bird species of coniferous forest. All four models performed well and allowed the distribution of suitable habitats for the crested tit in the Stockholm region to be predicted. The models were also used to predict and quantify habitat loss for two regional development scenarios. The study highlighted the importance of model selection in impact prediction. Criteria that are relevant for the choice of model for predicting impacts on biodiversity were identified and discussed. Finally, the importance of environmental assessment for the preservation of biodiversity within the general frame of biodiversity conservation is emphasised.

  6. [Ecological suitability regionalization for Gastrodia elata in Zhaotong based on Maxent and ArcGIS].

    Science.gov (United States)

    Shi, Zi-Wei; Ma, Cong-Ji; Kang, Chuan-Zhi; Wang, Li; Zhang, Zhi-Hui; Chen, Jun-Fei; Zhang, Xiao-Bo; Liu, Da-Hui

    2016-09-01

    In this paper, the potential distribution information and ecological suitability regionalization for Gastrodia elata in Zhaotong were studied based on the climate, terrain, soil and vegetation factors analysis by Maxent and ArcGIS. The results showed that the highly potential distribution (suitability index>0.6) mainly located in Zhaotong, Yunnan province(Zhenxiong,Yiliang and Daguan county, with an area of 2 872 km²), and Bijie, Guizhou province (Hezhang,Bijie,Weining county, 1 251 km²). The AUC of ROC curve was above 0.99, indicating that the predictive results with the Maxent model were highly precise. The main ecological factors determining the potential distribution were the altitude, average rainfall in November, average rainfall in October, vegetation types, average rainfall in March, average rainfall in April,soil types,isothermal characteristic and average rainfall in June. The environmental variables in the highly potential areas were determined as altitude around 1 450-2 200 m,annual average temperature around 18.0-20.4 ℃,annual average precipitation around 900 mm,yellow soil or yellow brown soil,and acid sandy loam or slightly acidic sandy loam.The results will provide valuable references for plantation regionalization and the siting for imitation wild planting of G. elata in Zhaotong. Copyright© by the Chinese Pharmaceutical Association.

  7. Study on methods and techniques of aeroradiometric weak information extraction for sandstone-hosted uranium deposits based on GIS

    International Nuclear Information System (INIS)

    Han Shaoyang; Ke Dan; Hou Huiqun

    2005-01-01

    The weak information extraction is one of the important research contents in the current sandstone-type uranium prospecting in China. This paper introduces the connotation of aeroradiometric weak information extraction, and discusses the formation theories of aeroradiometric weak information extraction, and discusses the formation theories of aeroradiometric weak information and establishes some effective mathematic models for weak information extraction. Models for weak information extraction are realized based on GIS software platform. Application tests of weak information extraction are realized based on GIS software platform. Application tests of weak information extraction are completed in known uranium mineralized areas. Research results prove that the prospective areas of sandstone-type uranium deposits can be rapidly delineated by extracting aeroradiometric weak information. (authors)

  8. An overview of ecological monitoring based on geographic information system (GIS) and remote sensing (RS) technology in China

    Science.gov (United States)

    Zhang, Jing; Zhang, Jia; Du, Xiangyang; Kang, Hou; Qiao, Minjuan

    2017-11-01

    Due to the rapid development of human economy and society, the resulting ecological problems are becoming more and more prominent, and the dynamic monitoring of the various elements in the ecosystem has become the focus of the current research. For the complex structure and function of the ecological environment monitoring, advanced technical means should be adopted. With the development of spatial information technology, the ecological monitoring technology based on GIS and RS is becoming more and more perfect, and spatial analysis will play an important role in the field of environmental protection. Based on the GIS and RS technology, this paper analyzes the general centralized ecological monitoring model, and makes an objective analysis of the current ecological monitoring trend of China. These are important for the protection and management of ecological environment in China.

  9. A GIS-based methodology for the estimation of potential volcanic damage and its application to Tenerife Island, Spain

    Science.gov (United States)

    Scaini, C.; Felpeto, A.; Martí, J.; Carniel, R.

    2014-05-01

    This paper presents a GIS-based methodology to estimate damages produced by volcanic eruptions. The methodology is constituted by four parts: definition and simulation of eruptive scenarios, exposure analysis, vulnerability assessment and estimation of expected damages. Multi-hazard eruptive scenarios are defined for the Teide-Pico Viejo active volcanic complex, and simulated through the VORIS tool. The exposure analysis identifies the elements exposed to the hazard at stake and focuses on the relevant assets for the study area. The vulnerability analysis is based on previous studies on the built environment and complemented with the analysis of transportation and urban infrastructures. Damage assessment is performed associating a qualitative damage rating to each combination of hazard and vulnerability. This operation consists in a GIS-based overlap, performed for each hazardous phenomenon considered and for each element. The methodology is then automated into a GIS-based tool using an ArcGIS® program. Given the eruptive scenarios and the characteristics of the exposed elements, the tool produces expected damage maps. The tool is applied to the Icod Valley (North of Tenerife Island) which is likely to be affected by volcanic phenomena in case of eruption from both the Teide-Pico Viejo volcanic complex and North-West basaltic rift. Results are thematic maps of vulnerability and damage that can be displayed at different levels of detail, depending on the user preferences. The aim of the tool is to facilitate territorial planning and risk management in active volcanic areas.

  10. An Ontology-Based GIS for Genomic Data Management of Rumen Microbes.

    Science.gov (United States)

    Jelokhani-Niaraki, Saber; Tahmoorespur, Mojtaba; Minuchehr, Zarrin; Nassiri, Mohammad Reza

    2015-03-01

    During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS)-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data.

  11. An Ontology-Based GIS for Genomic Data Management of Rumen Microbes

    Directory of Open Access Journals (Sweden)

    Saber Jelokhani-Niaraki

    2015-03-01

    Full Text Available During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data.

  12. An Ontology-Based GIS for Genomic Data Management of Rumen Microbes

    Science.gov (United States)

    Jelokhani-Niaraki, Saber; Minuchehr, Zarrin; Nassiri, Mohammad Reza

    2015-01-01

    During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS)-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data. PMID:25873847

  13. Distributed geo-services based on Wireless GIS- a case study for post-quake rescue information system

    OpenAIRE

    Liu, Yimei

    2014-01-01

    A useful application of Wireless GIS is the handling of natural disasters such as earthquakes. This thesis is dedicated to the construction and implementation of a post-quake rescue information system based on open source data and software programs. The emphasis is laid on the assessment of losses in the disaster area, estimation of collapsing buildings and trapped population, and efficient transmission of all the rescue-relevant information. The realized workflow of using open source data an...

  14. Archeology and GIS

    Directory of Open Access Journals (Sweden)

    Janez Dular

    1992-12-01

    Full Text Available Concepts of spatial and landscape archaeologu have been accepted within Stepene archaeology for a decade. These concepts are based on the assumption  that man, by his diverse activities, made a tremendous impact on the landscape as a whole. Therefore in the research of archaeological settlement patterns, the whole landscape should be observed and analgzed. Diverse techniques of archaeological survey for data collection were developed and theoretical concepts for interpretation of those data were adapted from geographg, but onlg by applying GIS technology were this concepts made accessible to ali archaeologists. Basic concepts for GIS applications were defined in the research project "The Genesis of the cultural landscape" at the Department of Archaeology of the University of Ljubljana. However, the Hvar Project, as the first archaeological čase study, played the crucial role in acceptance of GIS technology. The analyses were concentrated on the possibilities of GIS applications in archaeo logical analysis. The best results were achieved in definition of archaeological site territories, subsistence strategies, communications and trade analyses. Few regional čase studies were started this gear because it is to be expected that soon the majoritg of the GIS archaeological applications will be in protection and management of cultural heritage. Simultaneously the Institute for Archaeology at the Slovene Academy of Sciences and Art has started with the computerization of the site and monuments database which will be integrated into the state GIS.

  15. A GIS based watershed information system for water resources management and planning in semi-arid areas

    Science.gov (United States)

    Tzabiras, John; Spiliotopoulos, Marios; Kokkinos, Kostantinos; Fafoutis, Chrysostomos; Sidiropoulos, Pantelis; Vasiliades, Lampros; Papaioannou, George; Loukas, Athanasios; Mylopoulos, Nikitas

    2015-04-01

    The overall objective of this work is the development of an Information System which could be used by stakeholders for the purposes of water management as well as for planning and strategic decision-making in semi-arid areas. An integrated modeling system has been developed and applied to evaluate the sustainability of water resources management strategies in Lake Karla watershed, Greece. The modeling system, developed in the framework of "HYDROMENTOR" research project, is based on a GIS modelling approach which uses remote sensing data and includes coupled models for the simulation of surface water and groundwater resources, the operation of hydrotechnical projects (reservoir operation and irrigation works) and the estimation of water demands at several spatial scales. Lake Karla basin was the region where the system was tested but the methodology may be the basis for future analysis elsewhere. Τwo (2) base and three (3) management scenarios were investigated. In total, eight (8) water management scenarios were evaluated: i) Base scenario without operation of the reservoir and the designed Lake Karla district irrigation network (actual situation) • Reduction of channel losses • Alteration of irrigation methods • Introduction of greenhouse cultivation ii) Base scenario including the operation of the reservoir and the Lake Karla district irrigation network • Reduction of channel losses • Alteration of irrigation methods • Introduction of greenhouse cultivation The results show that, under the existing water resources management, the water deficit of Lake Karla watershed is very large. However, the operation of the reservoir and the cooperative Lake Karla district irrigation network coupled with water demand management measures, like reduction of water distribution system losses and alteration of irrigation methods, could alleviate the problem and lead to sustainable and ecological use of water resources in the study area. Acknowledgements: This study

  16. GIS-based analysis and modelling with empirical and remotely-sensed data on coastline advance and retreat

    Science.gov (United States)

    Ahmad, Sajid Rashid

    -term memory processes were indicative of transitory hydrodynamic and other processes. An innovative framework for a spatio-temporal information-based system (STIBS) was developed. STIBS incorporated diverse datasets within a GIS, dynamic computer-based simulation models, and a spatial information query and graphical subsystem. Tests of the STIBS proved that it could be used to simulate and visualize temporal variability in shifting morphological states of the coastline.

  17. Application of GIS to predict malaria hotspots based on Anopheles arabiensis habitat suitability in Southern Africa

    Science.gov (United States)

    Gwitira, Isaiah; Murwira, Amon; Zengeya, Fadzai M.; Shekede, Munyaradzi Davis

    2018-02-01

    Malaria remains a major public health problem and a principal cause of morbidity and mortality in most developing countries. Although malaria still presents health problems, significant successes have been recorded in reducing deaths resulting from the disease. As malaria transmission continues to decline, control interventions will increasingly depend on the ability to define high-risk areas known as malaria hotspots. Therefore, there is urgent need to use geospatial tools such as geographic information system to detect spatial patterns of malaria and delineate disease hot spots for better planning and management. Thus, accurate mapping and prediction of seasonality of malaria hotspots is an important step towards developing strategies for effective malaria control. In this study, we modelled seasonal malaria hotspots as a function of habitat suitability of Anopheles arabiensis (A. Arabiensis) as a first step towards predicting likely seasonal malaria hotspots that could provide guidance in targeted malaria control. We used Geographical information system (GIS) and spatial statistic methods to identify seasonal hotspots of malaria cases at the country level. In order to achieve this, we first determined the spatial distribution of seasonal malaria hotspots using the Getis Ord Gi* statistic based on confirmed positive malaria cases recorded at health facilities in Zimbabwe over four years (1996-1999). We then used MAXENT technique to model habitat suitability of A. arabiensis from presence data collected from 1990 to 2002 based on bioclimatic variables and altitude. Finally, we used autologistic regression to test the extent to which malaria hotspots can be predicted using A. arabiensis habitat suitability. Our results show that A. arabiensis habitat suitability consistently and significantly (p < 0.05) predicts malaria hotspots from 1996 to 1999. Overall, our results show that malaria hotspots can be predicted using A. arabiensis habitat suitability, suggesting

  18. GIS-Based KW-GIUH hydrological model of semiarid catchments: The case of Faria Catchment, Palestine

    International Nuclear Information System (INIS)

    Shadeed, S.; Shaheen, H.; Jayyousi, A.

    2007-01-01

    Among the most basic challenges of hydrology are the quantitative understanding of the processes of runoff generation and prediction of flow hydrographs. Traditional techniques have been widely applied for the estimation of runoff hydrographs of gauged catchments using historical rainfall-runoff data and unit hydrographs. Such procedures are questioned as to their reliability and their application to ungauged, arid and semiarid catchments. To overcome such difficulties, the use of physically based rainfall-runoff process of Faria Catchment using the lately developed KW-GIUH. Faria catchment, located in the northeastern part of the West Bank, Palestine, is characterized as a semiarid region with annual rainfall depths ranging on average from 150 to 640 mm at both ends of the catchment. The Geographical Information System (GIS) techniques were used to shape the geomorphological features of the catchment. A GIS based KW-GIUH hydrological model was used to stimulate the rainfall-runoff process in the three sub-catchments of Faria, namely: Al-Badan, Al-Faria and Al-Malaqi. The simulated runoff hydrographs proved that the GIS-based KW-GIUH model is applicable to semiarid regions and can be used to estimate the unit hydrographs in the West Bank catchments. (author)

  19. Multi-criteria GIS-based siting of an incineration plant for municipal solid waste.

    Science.gov (United States)

    Tavares, Gilberto; Zsigraiová, Zdena; Semiao, Viriato

    2011-01-01

    Siting a municipal solid waste (MSW) incineration plant requires a comprehensive evaluation to identify the best available location(s) that can simultaneously meet the requirements of regulations and minimise economic, environmental, health, and social costs. A spatial multi-criteria evaluation methodology is presented to assess land suitability for a plant siting and applied to Santiago Island of Cape Verde. It combines the analytical hierarchy process (AHP) to estimate the selected evaluation criteria weights with Geographic Information Systems (GIS) for spatial data analysis that avoids the subjectivity of the judgements of decision makers in establishing the influences between some criteria or clusters of criteria. An innovative feature of the method lies in incorporating the environmental impact assessment of the plant operation as a criterion in the decision-making process itself rather than as an a posteriori assessment. Moreover, a two-scale approach is considered. At a global scale an initial screening identifies inter-municipal zones satisfying the decisive requirements (socio-economic, technical and environmental issues, with weights respectively, of 48%, 41% and 11%). A detailed suitability ranking inside the previously identified zones is then performed at a local scale in two phases and includes environmental assessment of the plant operation. Those zones are ranked by combining the non-environmental feasibility of Phase 1 (with a weight of 75%) with the environmental assessment of the plant operation impact of Phase 2 (with a weight of 25%). The reliability and robustness of the presented methodology as a decision supporting tool is assessed through a sensitivity analysis. The results proved the system effectiveness in the ranking process. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Geostatistical modelling of carbon monoxide levels in Khartoum State (Sudan) - GIS pilot based study

    Energy Technology Data Exchange (ETDEWEB)

    Alhuseen, A [Comenius University in Bratislava, Faculty of Natural Sciences, Dept. of Landscape Ecology, 84215 Bratislava (Slovakia); Madani, M [Ministry of Environment and Physical Development, 1111 Khartoum (Sudan)

    2012-04-25

    The objective of this study is to develop a digital GIS model; that can evaluate, predict and visualize carbon monoxide (CO) levels in Khartoum state. To achieve this aim, sample data had been collected, processed and managed to generate a dynamic GIS model of carbon monoxide levels in the study area. Parametric data collected from the field and analysis carried throughout this study show that (CO) emissions were lower than the allowable ambient air quality standards released by National Environment Protection Council (NEPC-USA) for 1998. However, this pilot study has found emissions of (CO) in Omdurman city were the highest. This pilot study shows that GIS and geostatistical modeling can be used as a powerful tool to produce maps of exposure. (authors)

  1. A Curriculum-Linked Professional Development Approach to Support Teachers' Adoption of Web GIS Tectonics Investigations

    Science.gov (United States)

    Bodzin, Alec; Anastasio, David; Sahagian, Dork; Henry, Jill Burrows

    2016-01-01

    A curriculum-linked professional development approach designed to support middle level science teachers' understandings about tectonics and geospatial pedagogical content knowledge was developed. This approach takes into account limited face-to-face professional development time and instead provides pedagogical support within the design of a…

  2. Development of web-based GIS services for sustainable soil resource management at farm level

    Science.gov (United States)

    Papadopoulos, Antonis; Kolovos, Chronis; Troyanos, Yerasimos; Doula, Maria

    2017-09-01

    Modern farms situated in urban or suburban areas, include various and in most cases diverse land covers. Land uses in such farms may serve residential, structured, aesthetic and agricultural purposes, usually delimited inside the boundaries of a single property. The environmental conditions across a farm, especially if it is situated on an irregular terrain, can be highly differentiated. Managing soil resources in a small scale diverse farm environment in a holistic and sustainable way should have spatial and temporal reference and take advantage of cut-edge geospatial technologies. In present study, an 8 hectare farm with various land uses in the southern suburbs of Attica Prefecture, Greece was systematically monitored regarding its soil, water and plant resources. Almost 80% of the farm's area is covered with trees, shrubs and low vegetation planted in a mosaic of parterres. Farm data collected concerned soil and water physicochemical characteristics, plant species, topographical features, irrigation network, valves and infrastructure. All data were imported and developed in a GIS geodatabase. Furthermore, web GIS services and a mobile GIS app were developed in order to monitor, update and synchronize present status and future changes performed in the farm. Through the web services and using the mobile GIS app, the user has access to all data stored in the geodatabase and according to access rights he can view or edit the spatial entities. The user can easily make query to specific features, combine their properties with other overlaying spatial data and reach accurate decisions. The app can be downloaded and implemented in mobile devices like smartphones and tablets for extending its functionality. As proven in this study, web GIS services and mobile GIS apps constitute an attractive suite of methodologies for effective and user friendly management of natural resources at farm level.

  3. Indices of Biodiversity Pattern Based on Presence-Absence Matrices: A GIS Implementation

    Directory of Open Access Journals (Sweden)

    Jorge Soberon

    2015-09-01

    Full Text Available In this work we present mathematical notation and formulae relating a number of indices of the biodiversity pattern of an aggregate of species, and an Open Source implementation of them as a plug-in for the increasingly popular Open Source geographical information system Quantum GIS. We provide detailed formulae relating three indices of beta diversity, two of pattern of nestedness, one of checkerboard pattern, and two of ratios of variances. The above is done by deriving six vectors from the full presence-absence matrix. Our GIS implementation is done via Web Services, tapping the LifeMapper platform for calculating potential species distributions.

  4. Campgrounds Suitability Evaluation Using GIS-based Multiple Criteria Decision Analysis: A Case Study of Kuerdening, China

    Science.gov (United States)

    Cuirong, Wang; Zhaoping, Yang; Huaxian, Liu; Fang, Han; Wenjin, Xia

    2016-04-01

    The main objective of this study was to evaluate the suitability and select the most appropriate areas for building campgrounds in Kuerdening, China. To achieve this aim, AHP and GIS-based weighted overlay methods were adopted. AHP was used to determine the weights of the indexes, and ArcGIS 10 was used to calculate and map the campground suitability. In pursuit of minimum environmental effects and sustainable development, this paper identifies four factors to evaluate the suitability of areas for building campgrounds: natural environment condition, landscape condition, safety condition and infrastructure condition. The final outcome of this studywas the suitability map for building campgrounds. This research not only provides a theoretical guide for the construction of campgrounds in this area but also provides a scientific and efficientworkflow to evaluate the appropriateness of other areas. The result is reasonable and operable for camping facilities development and also useful for managers and planners working in local governments as well as investors.

  5. The effects of roadway characteristics on farm equipment crashes: A GIS approach

    Science.gov (United States)

    Greenan, Mitchell Joseph

    Tractors and other self-propelled farm equipment, such as combines, sprayers, and towed grain carts, are often used on public roadways as the primary means for traveling from homestead to homestead or from homestead to a distributer. Increased roadway exposure has led to a growing concern for crashes involving farm equipment on the public roadway. A handful of studies exist examining public roadway crashes involving farm equipment using crash data, but none thus far have evaluated road segment data to identify road-specific risk factors. The objective of this study is to identify if roadway characteristics (traffic density, speed limit, road type, surface type, road width, and shoulder width) affect the risk of a crash involving farm equipment on Iowa public roadways. A retrospective cohort study of Iowa roads was conducted to identify the types of roads that are at an increased risk of having a farm-equipment crash on them. Crash data from the Iowa Department of Transportation (to identify crashes) were spatial linked to Iowa roadway data using Geographic Information Systems (GIS). Logistic regression was used to calculate ORs and 95% CL. Out of 319,705 road segments in Iowa, 0.4% segments (n=1,337) had a farm equipment crash from 2005-2011. The odds of having a farm equipment crash were significantly higher for road segments with increased traffic density and speed limit. Roads with an average daily traffic volume of at least 1,251 vehicles were at a 5.53 times greater odds of having a crash than roads with a daily traffic volume between 0-30 vehicles. (CI: 3.90-7.83). Roads with a posted speed limit between 50mph and 60mph were at a 4.88 times greater odds of having a crash than roads with a posted speed limit of 30mph or less. (CI: 3.85-6.20). Specific roadway characteristics such as roadway and shoulder width were also associated with the risk of a crash. For every 5 foot increase in road width, the odds for a crash decreased by 6 percent (CI: 0.89-0.99) and

  6. Mapping eco-environmental vulnerability patterns: An assessment framework based on remote sensing, GIS, and AHP

    Science.gov (United States)

    Anh, N. K.; Liou, Y. A.; Li, M. H.

    2016-12-01

    The motivation for this study is assessment of the eco-environment vulnerability based on four independent determinants: hydro-meteorology, topography, land resources, and human activities. An assessment framework is proposed to assess the vulnerable eco-environment by using 16 variables with 6 of them constructed from Landsat 8 satellite images. The remaining variables were extracted from digital maps. Each variable was evaluated and spatially mapped with the aid of an analytical hierarchy process (AHP) and geographical information system (GIS). The Thua Thien - Hue Province that has been experiencing natural disasters and urbanization in the recent decades is selected as our study area. An eco-environmental vulnerability map is assorted into six vulnerable levels consisting of potential, slight, light, medium, heavy, and very heavy vulnerabilities, representing 14%, 27%, 17%, 26%, 13%, 3% of the study area, respectively. It is found that heavy and very heavy vulnerable areas appear mainly in the low and medium lands with high intensification of social-economic activities and often suffer from flooding. Tiny percentages of medium and heavy vulnerable levels occur in high land areas probably caused by agricultural practices in highlands, slash and burn cultivation and removal of natural forests with new plantation forests and these regions are usually influenced by landslides, flash flooding. Based on our results, three ecological zones requiring different development and protection solutions are proposed to restore local eco-environment toward sustainable development. Our findings support the idea that eco-environmental vulnerability is driven by anthropogenic processes and enhanced by natural disaster in the Thua Thien-Hue Province.

  7. IDENTIFYING HIGH-RISK POPULATIONS OF TUBERCULOSIS USING ENVIRONMENTAL FACTORS AND GIS BASED MULTI-CRITERIA DECISION MAKING METHOD

    Directory of Open Access Journals (Sweden)

    A. R. Abdul Rasam

    2016-09-01

    Full Text Available Development of an innovative method to enhance the detection of tuberculosis (TB in Malaysia is the latest agenda of the Ministry of Health. Therefore, a geographical information system (GIS based index model is proposed as an alternative method for defining potential high-risk areas of local TB cases at Section U19, Shah Alam. It is adopted a spatial multi-criteria decision making (MCDM method for ranking environmental risk factors of the disease in a standardised five-score scale. Scale 1 and 5 illustrate the lowest and the highest risk of the TB spread respectively, while scale from 3 to 5 is included as a potential risk level. These standardised scale values are then combined with expert normalised weights (0 to 1 to calculate the overall index values and produce a TB ranked map using a GIS overlay analysis and weighted linear combination. It is discovered that 71.43% of the Section is potential as TB high risk areas particularly at urban and densely populated settings. This predictive result is also reliable with the current real cases in 2015 by 76.00% accuracy. A GIS based MCDM method has demonstrated analytical capabilities in targeting high-risk spots and TB surveillance monitoring system of the country, but the result could be strengthened by applying other uncertainty assessment method.

  8. GIS-based multicriteria municipal solid waste landfill suitability analysis: a review of the methodologies performed and criteria implemented.

    Science.gov (United States)

    Demesouka, O E; Vavatsikos, A P; Anagnostopoulos, K P

    2014-04-01

    Multicriteria spatial decision support systems (MC-SDSS) have emerged as an integration of the geographical information systems (GIS) and multiple criteria decision analysis (MCDA) methods. GIS-based MCDA allows the incorporation of conflicting objectives and decision maker (DM) preferences into spatial decision models. During recent decades, a variety of research articles have been published regarding the implementation of methods and/or tools in a variety of real-world case studies. The article discusses, in detail, the criteria and methods that are implemented in GIS-based landfill siting suitability analysis and especially the exclusionary and non-exclusionary criteria that can be considered when selecting sites for municipal solid waste (MSW) landfills. This paper reviews 36 seminal articles in which the evaluation of candidate landfill sites is conducted using MCDA methods. After a brief description of the main components of a MC-SDSS and the applied decision rules, the review focuses on the criteria incorporated into the decision models. The review provides a comprehensive guide to the landfill siting analysis criteria, providing details regarding the utilization methods, their decision or exclusionary nature and their monotonicity.

  9. A simplified GIS-based model for large wood recruitment and connectivity in mountain basins

    Science.gov (United States)

    Lucía, Ana; Antonello, Andrea; Campana, Daniela; Cavalli, Marco; Crema, Stefano; Franceschi, Silvia; Marchese, Enrico; Niedrist, Martin; Schneiderbauer, Stefan; Comiti, Francesco

    2014-05-01

    The mobilization of large wood (LW) elements in mountain rivers channels during floods may increase their hazard potential, especially by clogging narrow sections such as bridges. However, the prediction of LW transport magnitude during flood events is a challenging topic. Although some models on LW transport have been recently developed, the objective of this work was to generate a simplified GIS-based model to identify along the channel network the most likely LW-related critical sections during high-magnitude flood events in forested mountain basins. Potential LW contribution generated by landsliding occurring on hillslopes is assessed using SHALSTAB stability model coupled to a GIS-based connectivity index, developed as a modification of the index proposed by Cavalli et al (2013). Connected slope-derived LW volumes are then summed at each raster cell to LW volumes generated by bank erosion along the erodibile part of river corridors, where bank erosion processes are estimated based on user-defined channel widening ratios stemming from observations following recent extreme events in mountain basins. LW volume in the channel is then routed through the stream network applying simple Boolean rules meant to capture the most important limiting transport condition in these high-energy systems at flood stage, i.e. flow width relative to log length. In addition, the role of bridges and retention check-dams in blocking floating logs is accounted for in the model, in particular bridge length and height are used to characterize their clogging susceptibility for different levels of expected LW volumes and size. The model has been tested in the Rienz and Ahr basins (about 630 km2 each), located in the Eastern Italian Alps. Sixty percent of the basin area is forested, and elevations range from 811 m a.s.l. to 3488 m a.s.l.. We used a 2.5 m resolution DTM and DSM, and their difference was used to calculate the canopy height. Data from 35 plots of the National Forest Inventory

  10. Characteristics and Impact of Imperviousness From a GIS-based Hydrological Perspective

    Science.gov (United States)

    Moglen, G. E.; Kim, S.

    2005-12-01

    With the concern that imperviousness can be differently quantified depending on data sources and methods, this study assessed imperviousness estimates using two different data sources: land use and land cover. Year 2000 land use developed by the Maryland Department of Planning was utilized to estimate imperviousness by assigning imperviousness coefficients to unique land use categories. These estimates were compared with imperviousness estimates based on satellite-derived land cover from the 2001 National Land Cover Dataset. Our study developed the relationships between these two estimates in the form of regression equations to convert imperviousness derived from one data source to the other. The regression equations are considered reliable, based on goodness-of-fit measures. Furthermore, this study examined how quantitatively different imperviousness estimates affect the prediction of hydrological response both in the flow regime and in the thermal regime. We assessed the relationships between indicators of hydrological response and imperviousness-descriptors. As indicators of flow variability, coefficient of variance, lag-one autocorrelation, and mean daily flow change were calculated based on measured mean daily stream flow from the water year 1997 to 2003. For thermal variability, indicators such as percent-days of surge, degree-day, and mean daily temperature difference were calculated base on measured stream temperature over several basins in Maryland. To describe imperviousness through the hydrological process, GIS-based spatially distributed hydrological models were developed based on a water-balance method and the SCS-CN method. Imperviousness estimates from land use and land cover were used as predictors in these models to examine the effect of imperviousness using different data sources on the prediction of hydrological response. Indicators of hydrological response were also regressed on aggregate imperviousness. This allowed for identifying if

  11. GIS-Based Sub-Basin Scale Identification of Dominant Runoff Processes for Soil and Water Management in Anambra Area of Nigeria

    Science.gov (United States)

    Fagbohun, Babatunde Joseph; Olabode, Oluwaseun Franklin; Adebola, Abiodun Olufemi; Akinluyi, Francis Omowonuola

    2017-12-01

    Identifying landscapes having comparable hydrological characteristics is valuable for the determination of dominant runoff process (DRP) and prediction of flood. Several approaches used for DRP-mapping vary in relation to data and time requirement. Manual approaches which are based on field investigation and expert knowledge are time demanding and difficult to implement at regional scale. Automatic GIS-based approach on the other hand require simplification of data but is easier to implement and it is applicable on a regional scale. In this study, GIS-based automated approach was used to identify the DRPs in Anambra area. The result showed that Hortonian overland flow (HOF) has the highest coverage of 1508.3 km2 (33.5%) followed by deep percolation (DP) with coverage of 1455.3 km2 (32.3%). Subsurface flow (SSF) is the third dominant runoff process covering 920.6 km2 (20.4%) while saturated overland flow (SOF) covers the least area of 618.4 km2 (13.7%) of the study area. The result reveal that considerable amount of precipitated water would be infiltrated into the subsurface through deep percolation process contributing to groundwater recharge in the study area. However, it is envisaged that HOF and SOF will continue to increase due to the continuous expansion of built-up area. With the expected increase in HOF and SOF, and the change in rainfall pattern associated with perpetual problem of climate change, it is paramount that groundwater conservation practices should be considered to ensure continued sustainable utilization of groundwater in the study area.

  12. 3D GIS BASED EVALUATION OF THE AVAILABLE SIGHT DISTANCE TO ASSESS SAFETY OF URBAN ROADS

    Directory of Open Access Journals (Sweden)

    M. Bassani

    2015-08-01

    Full Text Available The available sight distance (ASD in front of the driver to detect possible conflicts with unexpected obstacles is fundamental for traffic safety. In the last 20 years, road design software (RDS has been continuously updated with dedicated modules to estimate ASD, thus assessing the quality of project from a safety point of view. Unfortunately, the evaluation of ASD still represents an issue in the case of existing road, and the object of discussion in the research community. To avoid problems related to the limitation associated with the use of digital terrain models typically employed in RDS, the Geographic Information Systems (GIS software can use digital surface models (DSM which are more flexible in the modelling of sight obstruction due to vegetation, street furniture, and vertical surfaces largely diffused in urbanized areas. The paper deals with the evaluation of GIS in the estimation of ASD in a typical urban road where the density of sight obstruction along the roadside is relatively high. The work explores the case study of a collector road in the city of Turin (Italy. Results confirm the potentiality of GIS software in capturing the complex morphology of the urban environment, thus confirming that GIS could become an important analysis tool for road engineers in the field of road safety. The investigation here described is part of the Pro-VISION Project (funded in 2014 by the Regione Piemonte, Italy.

  13. Automating standards based metadata creation using free and open source GIS tools

    NARCIS (Netherlands)

    Ellull, C.D.; Tamash, N.; Xian, F.; Stuiver, H.J.; Rickles, P.

    2013-01-01

    The importance of understanding the quality of data used in any GIS operation should not be underestimated. Metadata (data about data) traditionally provides a description of this quality information, but it is frequently deemed as complex to create and maintain. Additionally, it is generally stored

  14. Evaluation of location and number of aid post for sustainable humanitarian relief using agent based modeling (ABM) and geographic information system (GIS)

    Science.gov (United States)

    Khair, Fauzi; Sopha, Bertha Maya

    2017-12-01

    One of the crucial phases in disaster management is the response phase or the emergency response phase. It requires a sustainable system and a well-integrated management system. Any errors in the system on this phase will impact on significant increase of the victims number as well as material damage caused. Policies related to the location of aid posts are important decisions. The facts show that there are many failures in the process of providing assistance to the refugees due to lack of preparation and determination of facilities and aid post location. Therefore, this study aims to evaluate the number and location of aid posts on Merapi eruption in 2010. This study uses an integration between Agent Based Modeling (ABM) and Geographic Information System (GIS) about evaluation of the number and location of the aid post using some scenarios. The ABM approach aims to describe the agents behaviour (refugees and volunteers) in the event of a disaster with their respective characteristics. While the spatial data, GIS useful to describe real condition of the Sleman regency road. Based on the simulation result, it shows alternative scenarios that combine DERU UGM post, Maguwoharjo Stadium, Tagana Post and Pakem Main Post has better result in handling and distributing aid to evacuation barrack compared to initial scenario. Alternative scenarios indicates the unmet demands are less than the initial scenario.

  15. Globally-Applicable Predictive Wildfire Model   a Temporal-Spatial GIS Based Risk Analysis Using Data Driven Fuzzy Logic Functions

    Science.gov (United States)

    van den Dool, G.

    2017-11-01

    This study (van den Dool, 2017) is a proof of concept for a global predictive wildfire model, in which the temporal-spatial characteristics of wildfires are placed in a Geographical Information System (GIS), and the risk analysis is based on data-driven fuzzy logic functions. The data sources used in this model are available as global datasets, but subdivided into three pilot areas: North America (California/Nevada), Europe (Spain), and Asia (Mongolia), and are downscaled to the highest resolution (3-arc second). The GIS is constructed around three themes: topography, fuel availability and climate. From the topographical data, six derived sub-themes are created and converted to a fuzzy membership based on the catchment area statistics. The fuel availability score is a composite of four data layers: land cover, wood loads, biomass, biovolumes. As input for the climatological sub-model reanalysed daily averaged, weather-related data is used, which is accumulated to a global weekly time-window (to account for the uncertainty within the climatological model) and forms the temporal component of the model. The final product is a wildfire risk score (from 0 to 1) by week, representing the average wildfire risk in an area. To compute the potential wildfire risk the sub-models are combined usinga Multi-Criteria Approach, and the model results are validated against the area under the Receiver Operating Characteristic curve.

  16. THE METHOD FOR IDENTIFYING THE MOST VULNERABLE AREAS CAUSED BY EXOGENOUS PROCESSES UNDER ARIDIFICATION/HUMIDIFICATION (BASED ON GIS AND RS

    Directory of Open Access Journals (Sweden)

    D. A. Chupina

    2017-01-01

    Full Text Available The paper presents the method of identifying the most vulnerable territories under exogenous processes caused by aridification/humidification. It is based on the assumption that some forms and types of relief increase resistance of terrestrial ecosystems to external influences, while other kinds of relief make them vulnerable. The relationship between landscape and moistening (ground and climatic is of great importance to plains which have groundwater close to the surface. We have used morphometric analysis to divide the territory into hydromorphic and automorphic landscapes. Hydromorphic territories are those that are affected by additional surface moistening and groundwater, while automorphic landscapes are less dependent on groundwater under normal atmospheric moisture. The territory is ranked according to the degree of vulnerability by expert evaluation method. The developed approach is based entirely on using GIS software (ArcGIS 10.2.1 and processing the DEM SRTM. As a result, two models of vulnerability of natural terrestrial ecosystems to exogenic processes on Baraba Plain (Western Siberia have been created for both aridification and humidification cases. The opportunity to estimate the vulnerability is the novel feature for these models of terrestrial ecosystems, in both regional and local scales. The results obtained confirm the existing ideas about the discrete mosaic character of changes in spatial landscape patterns in the area under consideration. For the southern part of Western Siberia where farming is risky the assessment of the potential degree of vulnerability for ecosystems under conditions of increasing climate aridity and extremes is relevant.

  17. GIS based spatial pattern analysis: Children with Hepatitis A in Turkey.

    Science.gov (United States)

    Dogru, Ahmet Ozgur; David, Ruusa Magano; Ulugtekin, Necla; Goksel, Cigdem; Seker, Dursun Zafer; Sözen, Seval

    2017-07-01

    This study aimed to provide an insight into the geographic distribution of Hepatitis A incidence considering their temporal distribution, spatial patterns, hot spots and clusters identification in three different age-group (0-4, 5-9 and 10-14) in Turkey. Province based tabular data, including monthly numbers of Hepatitis A cases in children, and the populations from 2001 to 2011 were used as the basic input of the study. Time series maps were created using Geographic Information Systems (GIS) to introduce the temporal changes in the morbidity rates of Hepatitis A. The spatial variation of Hepatitis A was measured using Moran's I at the global level and the local indicators of spatial associations (LISAs) Moran's I and Getis-Ord G i *(d) in order to identify influential locations through clusters and hot spots detection of Hepatitis A cases. The morbidity rates in children under the age of 5 were found significantly lower than the other age-groups, whereas the age-group 5-9 revealed the highest morbidity rates in the study area. The morbidity of Hepatitis A was detected very high for the years 2001, and 2005-2007. The identification of the highly vulnerable provinces was conducted using local Moran's I and local Getis-Ord G i *(d). The majority of clusters and hot spots were detected to be agglomerated in the Eastern Mediterranean and South-Eastern Anatolian Regions and Ceyhan, Asi and Southeast part of Firat-Dicle river basins in Turkey. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. A WebGIS system on the base of satellite data processing system for marine application

    Science.gov (United States)

    Gong, Fang; Wang, Difeng; Huang, Haiqing; Chen, Jianyu

    2007-10-01

    From 2002 to 2004, a satellite data processing system for marine application had been built up in State Key Laboratory of Satellite Ocean Environment Dynamics (Second Institute of Oceanography, State Oceanic Administration). The system received satellite data from TERRA, AQUA, NOAA-12/15/16/17/18, FY-1D and automatically generated Level3 products and Level4 products(products of single orbit and merged multi-orbits products) deriving from Level0 data, which is controlled by an operational control sub-system. Currently, the products created by this system play an important role in the marine environment monitoring, disaster monitoring and researches. Now a distribution platform has been developed on this foundation, namely WebGIS system for querying and browsing of oceanic remote sensing data. This system is based upon large database system-Oracle. We made use of the space database engine of ArcSDE and other middleware to perform database operation in addition. J2EE frame was adopted as development model, and Oracle 9.2 DBMS as database background and server. Simply using standard browsers(such as IE6.0), users can visit and browse the public service information that provided by system, including browsing for oceanic remote sensing data, and enlarge, contract, move, renew, traveling, further data inquiry, attribution search and data download etc. The system is still under test now. Founding of such a system will become an important distribution platform of Chinese satellite oceanic environment products of special topic and category (including Sea surface temperature, Concentration of chlorophyll, and so on), for the exaltation of satellite products' utilization and promoting the data share and the research of the oceanic remote sensing platform.

  19. Potential Coastal Pumped Hydroelectric Energy Storage Locations Identified using GIS-based Topographic Analysis

    Science.gov (United States)

    Parsons, R.; Barnhart, C. J.; Benson, S. M.

    2013-12-01

    Large-scale electrical energy storage could accommodate variable, weather dependent energy resources such as wind and solar. Pumped hydroelectric energy storage (PHS) and compressed energy storage area (CAES) have life cycle energy and financial costs that are an order of magnitude lower than conventional electrochemical storage technologies. However PHS and CAES storage technologies require specific geologic conditions. Conventional PHS requires an upper and lower reservoir separated by at least 100 m of head, but no more than 10 km in horizontal distance. Conventional PHS also impacts fresh water supplies, riparian ecosystems, and hydrologic environments. A PHS facility that uses the ocean as the lower reservoir benefits from a smaller footprint, minimal freshwater impact, and the potential to be located near off shore wind resources and population centers. Although technologically nascent, today one coastal PHS facility exists. The storage potential for coastal PHS is unknown. Can coastal PHS play a significant role in augmenting future power grids with a high faction of renewable energy supply? In this study we employ GIS-based topographic analysis to quantify the coastal PHS potential of several geographic locations, including California, Chile and Peru. We developed automated techniques that seek local topographic minima in 90 m spatial resolution shuttle radar topography mission (SRTM) digital elevation models (DEM) that satisfy the following criteria conducive to PHS: within 10 km from the sea; minimum elevation 150 m; maximum elevation 1000 m. Preliminary results suggest the global potential for coastal PHS could be very significant. For example, in northern Chile we have identified over 60 locations that satisfy the above criteria. Two of these locations could store over 10 million cubic meters of water or several GWh of energy. We plan to report a global database of candidate coastal PHS locations and to estimate their energy storage capacity.

  20. GIS supported calculations of 137Cs deposition in Sweden based on precipitation data

    International Nuclear Information System (INIS)

    Almgren, Sara; Nilsson, Elisabeth; Erlandsson, Bengt; Isaksson, Mats

    2006-01-01

    It is of interest to know the spatial variation and the amount of 137 Cs e.g. in case of an accident with a radioactive discharge. In this study, the spatial distribution of the quarterly 137 Cs deposition over Sweden due to nuclear weapons fallout (NWF) during the period 1962-1966 was determined by relating the measured deposition density at a reference site to the amount of precipitation. Measured quarterly values of 137 Cs deposition density per unit precipitation at three reference sites and quarterly precipitation at 62 weather stations distributed over Sweden were used in the calculations. The reference sites were assumed to represent areas with different quarterly mean precipitation. The extent of these areas was determined from the distribution of the mean measured precipitation between 1961 and 1990 and varied according to seasonal variations in the mean precipitation pattern. Deposition maps were created by interpolation within a geographical information system (GIS). Both integrated (total) and cumulative (decay corrected) deposition densities were calculated. The lowest levels of NWF 137 Cs deposition density were noted in north-eastern and eastern parts of Sweden and the highest levels in the western parts of Sweden. Furthermore the deposition density of 137 Cs, resulting from the Chernobyl accident was determined for an area in western Sweden based on precipitation data. The highest levels of Chernobyl 137 Cs in western Sweden were found in the western parts of the area along the coast and the lowest in the east. The sum of the deposition densities from NWF and Chernobyl in western Sweden was then compared to the total activity measured in soil samples at 27 locations. Comparisons between the predicted values of this study show a good agreement with measured values and other studies

  1. Astronomical Site Survey for Mountain Wumingshan Area in Western Sichuan Based on GIS

    Science.gov (United States)

    Wu, N.; Liu, Y.; Zhao, H. M.

    2016-11-01

    In the Western-China Astronomical Site Survey project, we utilize the Geographic Information System (GIS) for the collection of long-term data, in order to investigate and study the Wumingshan (WMS) mountain and its surrounding areas for their geography, geology, climate, meteorology, social and demographic trends. Data analysis results show that the WMS mountain is located in the eastern fold belt of the Tibet Plateau--the typical region of the Hengduan Mountains, which leads to its large elevation, gently trended ridge, and stable geological structure. The highest altitude above the sea level at the WMS is more than 5000 m, but there are population settlements nearby with the low altitude of only 2000-3000 m, which are important for realizing low-level cost logistics conditions for the future headquarter or logistic base. Earthquake landslides and other geological disasters were rarely recorded. The other facts are such as the dry and clean atmosphere, the sparse vegetation, the semi-dry-state land, the perennial prevailing southwest wind, the rain-less winter, and the relatively short rainy-season summer, the location in the heartland of the large Shangri-La, no records of dust storms and the other inclement weather, low cloud coverage, the stability of wind direction, the small wind speed, the high possibility of clear sky, the far distance away from the developed areas in Sichuan and Yunnan provinces, and Tibet Autonomous Region, the sparsely populated people, the slowly developed economy, the peaceful and stable social environment, etc. Specially, in recent years, with the development of the local tourist resources, the traffic conditions in Daocheng have been significantly improved. With high quality highway maintenance and daily air transport capacity, the transportation of land and aviation is rarely interrupted due to snowing, which often happens in high plateau regions. Therefore, the WMS area possesses the potential conditions to establish the future

  2. [Dynamics of soil erosion at upper reaches of Minjiang River based on GIS].

    Science.gov (United States)

    He, Xingyuan; Hu, Zhibi; Li, Yuehui; Hu, Yuanman

    2005-12-01

    Based on TM and ETM imagines, and employing GIS technique and empirical Revised Universal Soil Loss Equation (RUSLE) model, this paper studied the dynamics of soil erosion at the upper reaches of Minjiang River during three typical periods, with the main affecting factors analyzed. The results showed that the soil erosion area was increased by 1.28%, 1.84 % and 1.70% in 1986, 1995 and 2000, respectively. The average erosion modulus was increased from 832.64 t x km(-2) x yr(-1) in 1986 to 1048.74 t x km(-2) yr(-2) in 1995 and reached 1362.11 t x km(-2) yr(-1) in 2000, and soil loss was mainly of slight and light erosion, companying with a small quantity of middling erosion. The area of soil erosion was small, and the degree was light. There was a significant correlation between slope and soil loss, which mainly happened in the regions with a slope larger than 25 degrees, and accounted for 93.65%, 93.81% and 92.71% of the total erosion in 1986, 1995 and 2000, respectively. As for the altitude, middling, semi-high and high mountains and dry valley were liable to soil erosion, which accounted for 98.21%, 97.63% and 99.27% of the total erosion in 1986, 1995 and 2000, respectively. Different vegetation had a significant effect on soil erosion, and shrub and newly restored forest were the main erosion area. Excessive depasture not only resulted in the degradation of pasture, but also led to slight soil erosion. Land use type and soil type also contributed to soil loss, among which, dry-cinnamon soil and calcic gray-cinnamon soil were the most dangerous ones needing more protection. Soil loss was also linearly increased with increasing population and households, which suggested that the increase of population and households was the driving factor for soil loss increase in this area.

  3. PaleoGeo: a Web based GIS database for paleoenvironmental studies

    Science.gov (United States)

    Song, Wonsuh; Kondo, Yasuhisa; Oguchi, Takashi

    2014-05-01

    Paleoenvironmental studies cover various fields such as paleohydrology, geomorphology, paleooceanology, paleobiology, paleoclimatology, and chronology. It is difficult for an individual researcher to collect and compile enormous data regarding these fields. We have been compiling portal data and presenting them using a web-based geographical information system (Web-GIS) called PaleoGeo for the multidisciplinary project 'Replacement of Neanderthals by Modern Humans'. The aim of the project is to reconstruct the distribution of Neanderthals and modern humans in time and space in relation to past climate change. We have been collecting information from almost three thousand articles of 13 journals regarding paleoenvironmental research (i.e., Boreas, Catena, Climatic Change, Earth Surface Processes and Landforms, Geomorphology, Journal of Quaternary Science, Palaeogeography, Palaeoclimatology, and Palaeoecology, Quaternary International, Quaternary Research, Quaternary Science Reviews, The Holocene, and The Journal of Geology). The topics of the articles were classified into six themes (paleohydrology, earth surface processes and materials, paleooceanology, paleobiology, palaeoclimatology, and chronology) and 19 subthemes (hydrology, flood, fluvial, glacier, fluvial/glacier, sedimentology, soil, slope process, periglacial, peat land, eolian, sea-level, biology, vegetation, zoology, vegetation/zoology, archaeology, climate, atmosphere, and chronology). The collected data consist of the journal name, information about each paper (authors, title, volume, year, and page numbers), site location (country name, longitude, and latitude), theme, subtheme, keywords, DOI (Digital Object Identifier), and period (era). Location data are indispensable for paleoenvironmental studies. The PaleoGeo shows information with a map, which is an advantage of this database system. However, the number of the paleoenvironmental studies is growing rapidly and we have to effectively cover them as

  4. High-Resolution Climate Data Visualization through GIS- and Web-based Data Portals

    Science.gov (United States)

    WANG, X.; Huang, G.

    2017-12-01

    Sound decisions on climate change adaptation rely on an in-depth assessment of potential climate change impacts at regional and local scales, which usually requires finer resolution climate projections at both spatial and temporal scales. However, effective downscaling of global climate projections is practically difficult due to the lack of computational resources and/or long-term reference data. Although a large volume of downscaled climate data has been make available to the public, how to understand and interpret the large-volume climate data and how to make use of the data to drive impact assessment and adaptation studies are still challenging for both impact researchers and decision makers. Such difficulties have become major barriers preventing informed climate change adaptation planning at regional scales. Therefore, this research will explore new GIS- and web-based technologies to help visualize the large-volume regional climate data with high spatiotemporal resolutions. A user-friendly public data portal, named Climate Change Data Portal (CCDP, http://ccdp.network), will be established to allow intuitive and open access to high-resolution regional climate projections at local scales. The CCDP offers functions of visual representation through geospatial maps and data downloading for a variety of climate variables (e.g., temperature, precipitation, relative humidity, solar radiation, and wind) at multiple spatial resolutions (i.e., 25 - 50 km) and temporal resolutions (i.e., annual, seasonal, monthly, daily, and hourly). The vast amount of information the CCDP encompasses can provide a crucial basis for assessing impacts of climate change on local communities and ecosystems and for supporting better decision making under a changing climate.

  5. GIS (Geographic Information Systems) based automatic tool for selection of gas pipeline corridors

    Energy Technology Data Exchange (ETDEWEB)

    Matos, Denise F.; Menezes, Paulo Cesar P.; Paz, Luciana R.L.; Garcia, Katia C.; Cruz, Cristiane B.; Pires, Silvia H.M.; Damazio, Jorge M.; Medeiros, Alexandre M.

    2009-07-01

    This paper describes a methodology developed to build total accumulated surfaces in order to better select gas pipelines corridor alternatives. The methodology is based on the minimization of negative impacts and the use of Geographic Information Systems (GIS), allowing an automatic method of construction, evaluation and selection of alternatives, that will contribute to the decision making process. It is important to emphasize that this paper follows the assumptions presented on the research reports of a project sponsored by the Ministry of Mines and Energy (MME) and elaborated at the Electric Power Research Center (CEPEL), called 'Development of a Geographic Information System to Oil and Gas Sectors in Brazil', and also the studies d GTW Project (Gas to Wire). Gas pipelines, as for their linear characteristic, may cross a variety of habitats and settlements, increasing the complexity of their environmental management. Considering this reality, this paper presents a methodology that takes into account different environmental criteria (layers), according to the area impacted. From the synthesis of the criteria it is presented the total accumulated surface. It is showed an example of a hypothetical gas pipeline connection between two points using the total accumulated surface. To select the 'impact scores' of the features, the gas pipeline was considered as a linear feature, but the result is a region, formed by pixels, each pixel with an accumulated impact score lower than some arbitrary measure. This region is called 'corridor', and it is the final result obtained using the proposed methodology. (author)

  6. Landslide susceptibility mapping along PLUS expressways in Malaysia using probabilistic based model in GIS

    Science.gov (United States)

    Yusof, Norbazlan M.; Pradhan, Biswajeet

    2014-06-01

    PLUS Berhad holds the concession for a total of 987 km of toll expressways in Malaysia, the longest of which is the North-South Expressway or NSE. Acting as the backbone' of the west coast of the peninsula, the NSE stretches from the Malaysian-Thai border in the north to the border with neighbouring Singapore in the south, linking several major cities and towns along the way. North-South Expressway in Malaysia contributes to the country economic development through trade, social and tourism sector. Presently, the highway is good in terms of its condition and connection to every state but some locations need urgent attention. Stability of slopes at these locations is of most concern as any instability can cause danger to the motorist. In this paper, two study locations have been analysed; they are Gua Tempurung (soil slope) and Jelapang (rock slope) which are obviously having two different characteristics. These locations passed through undulating terrain with steep slopes where landslides are common and the probability of slope instability due to human activities in surrounding areas is high. A combination of twelve (12) landslide conditioning factors database on slope stability such as slope degree and slope aspect were extracted from IFSAR (interoferometric synthetic aperture radar) while landuse, lithology and structural geology were constructed from interpretation of high resolution satellite data from World View II, Quickbird and Ikonos. All this information was analysed in geographic information system (GIS) environment for landslide susceptibility mapping using probabilistic based frequency ratio model. Consequently, information on the slopes such as inventories, condition assessments and maintenance records were assessed through total expressway maintenance management system or better known as TEMAN. The above mentioned system is used by PLUS as an asset management and decision support tools for maintenance activities along the highways as well as for data

  7. Landslide susceptibility mapping along PLUS expressways in Malaysia using probabilistic based model in GIS

    International Nuclear Information System (INIS)

    Yusof, Norbazlan M; Pradhan, Biswajeet

    2014-01-01

    PLUS Berhad holds the concession for a total of 987 km of toll expressways in Malaysia, the longest of which is the North-South Expressway or NSE. Acting as the backbone' of the west coast of the peninsula, the NSE stretches from the Malaysian-Thai border in the north to the border with neighbouring Singapore in the south, linking several major cities and towns along the way. North-South Expressway in Malaysia contributes to the country economic development through trade, social and tourism sector. Presently, the highway is good in terms of its condition and connection to every state but some locations need urgent attention. Stability of slopes at these locations is of most concern as any instability can cause danger to the motorist. In this paper, two study locations have been analysed; they are Gua Tempurung (soil slope) and Jelapang (rock slope) which are obviously having two different characteristics. These locations passed through undulating terrain with steep slopes where landslides are common and the probability of slope instability due to human activities in surrounding areas is high. A combination of twelve (12) landslide conditioning factors database on slope stability such as slope degree and slope aspect were extracted from IFSAR (interoferometric synthetic aperture radar) while landuse, lithology and structural geology were constructed from interpretation of high resolution satellite data from World View II, Quickbird and Ikonos. All this information was analysed in geographic information system (GIS) environment for landslide susceptibility mapping using probabilistic based frequency ratio model. Consequently, information on the slopes such as inventories, condition assessments and maintenance records were assessed through total expressway maintenance management system or better known as TEMAN. The above mentioned system is used by PLUS as an asset management and decision support tools for maintenance activities along the highways as well as for

  8. Quantitative evaluation of the risk induced by dominant geomorphological processes on different land uses, based on GIS spatial analysis models

    Science.gov (United States)

    Ştefan, Bilaşco; Sanda, Roşca; Ioan, Fodorean; Iuliu, Vescan; Sorin, Filip; Dănuţ, Petrea

    2017-12-01

    Maramureş Land is mostly characterized by agricultural and forestry land use due to its specific configuration of topography and its specific pedoclimatic conditions. Taking into consideration the trend of the last century from the perspective of land management, a decrease in the surface of agricultural lands to the advantage of built-up and grass lands, as well as an accelerated decrease in the forest cover due to uncontrolled and irrational forest exploitation, has become obvious. The field analysis performed on the territory of Maramureş Land has highlighted a high frequency of two geomorphologic processes — landslides and soil erosion — which have a major negative impact on land use due to their rate of occurrence. The main aim of the present study is the GIS modeling of the two geomorphologic processes, determining a state of vulnerability (the USLE model for soil erosion and a quantitative model based on the morphometric characteristics of the territory, derived from the HG. 447/2003) and their integration in a complex model of cumulated vulnerability identification. The modeling of the risk exposure was performed using a quantitative approach based on models and equations of spatial analysis, which were developed with modeled raster data structures and primary vector data, through a matrix highlighting the correspondence between vulnerability and land use classes. The quantitative analysis of the risk was performed by taking into consideration the exposure classes as modeled databases and the land price as a primary alphanumeric database using spatial analysis techniques for each class by means of the attribute table. The spatial results highlight the territories with a high risk to present geomorphologic processes that have a high degree of occurrence and represent a useful tool in the process of spatial planning.

  9. Quantitative evaluation of the risk induced by dominant geomorphological processes on different land uses, based on GIS spatial analysis models

    Science.gov (United States)

    Ştefan, Bilaşco; Sanda, Roşca; Ioan, Fodorean; Iuliu, Vescan; Sorin, Filip; Dănuţ, Petrea

    2018-06-01

    Maramureş Land is mostly characterized by agricultural and forestry land use due to its specific configuration of topography and its specific pedoclimatic conditions. Taking into consideration the trend of the last century from the perspective of land management, a decrease in the surface of agricultural lands to the advantage of built-up and grass lands, as well as an accelerated decrease in the forest cover due to uncontrolled and irrational forest exploitation, has become obvious. The field analysis performed on the territory of Maramureş Land has highlighted a high frequency of two geomorphologic processes — landslides and soil erosion — which have a major negative impact on land use due to their rate of occurrence. The main aim of the present study is the GIS modeling of the two geomorphologic processes, determining a state of vulnerability (the USLE model for soil erosion and a quantitative model based on the morphometric characteristics of the territory, derived from the HG. 447/2003) and their integration in a complex model of cumulated vulnerability identification. The modeling of the risk exposure was performed using a quantitative approach based on models and equations of spatial analysis, which were developed with modeled raster data structures and primary vector data, through a matrix highlighting the correspondence between vulnerability and land use classes. The quantitative analysis of the risk was performed by taking into consideration the exposure classes as modeled databases and the land price as a primary alphanumeric database using spatial analysis techniques for each class by means of the attribute table. The spatial results highlight the territories with a high risk to present geomorphologic processes that have a high degree of occurrence and represent a useful tool in the process of spatial planning.

  10. Hands-on approach to teaching Earth system sciences using a information-computational web-GIS portal "Climate"

    Science.gov (United States)

    Gordova, Yulia; Gorbatenko, Valentina; Martynova, Yulia; Shulgina, Tamara

    2014-05-01

    A problem of making education relevant to the workplace tasks is a key problem of higher education because old-school training programs are not keeping pace with the rapidly changing situation in the professional field of environmental sciences. A joint group of specialists from Tomsk State University and Siberian center for Environmental research and Training/IMCES SB RAS developed several new courses for students of "Climatology" and "Meteorology" specialties, which comprises theoretical knowledge from up-to-date environmental sciences with practical tasks. To organize the educational process we use an open-source course management system Moodle (www.moodle.org). It gave us an opportunity to combine text and multimedia in a theoretical part of educational courses. The hands-on approach is realized through development of innovative trainings which are performed within the information-computational platform "Climate" (http://climate.scert.ru/) using web GIS tools. These trainings contain practical tasks on climate modeling and climate changes assessment and analysis and should be performed using typical tools which are usually used by scientists performing such kind of research. Thus, students are engaged in n the use of modern tools of the geophysical data analysis and it cultivates dynamic of their professional learning. The hands-on approach can help us to fill in this gap because it is the only approach that offers experience, increases students involvement, advance the use of modern information and communication tools. The courses are implemented at Tomsk State University and help forming modern curriculum in Earth system science area. This work is partially supported by SB RAS project VIII.80.2.1, RFBR grants numbers 13-05-12034 and 14-05-00502.

  11. Hands-on Approach to Prepare Specialists in Climate Changes Modeling and Analysis Using an Information-Computational Web-GIS Portal "Climate"

    Science.gov (United States)

    Shulgina, T. M.; Gordova, Y. E.; Martynova, Y. V.

    2014-12-01

    A problem of making education relevant to the workplace tasks is a key problem of higher education in the professional field of environmental sciences. To answer this challenge several new courses for students of "Climatology" and "Meteorology" specialties were developed and implemented at the Tomsk State University, which comprises theoretical knowledge from up-to-date environmental sciences with computational tasks. To organize the educational process we use an open-source course management system Moodle (www.moodle.org). It gave us an opportunity to combine text and multimedia in a theoretical part of educational courses. The hands-on approach is realized through development of innovative trainings which are performed within the information-computational web GIS platform "Climate" (http://climate.scert.ru/). The platform has a set of tools and data bases allowing a researcher to perform climate changes analysis on the selected territory. The tools are also used for students' trainings, which contain practical tasks on climate modeling and climate changes assessment and analysis. Laboratory exercises are covering three topics: "Analysis of regional climate changes"; "Analysis of climate extreme indices on the regional scale"; and "Analysis of future climate". They designed to consolidate students' knowledge of discipline, to instill in them the skills to work independently with large amounts of geophysical data using modern processing and analysis tools of web-GIS platform "Climate" and to train them to present results obtained on laboratory work as reports with the statement of the problem, the results of calculations and logically justified conclusion. Thus, students are engaged in n the use of modern tools of the geophysical data analysis and it cultivates dynamic of their professional learning. The approach can help us to fill in this gap because it is the only approach that offers experience, increases students involvement, advance the use of modern

  12. GIS-BASED EVALUATION AND PREDICTION OF ECOLOGICAL SITUATION IN THE COAL MINING AREAS WITH A CRITICAL TECHNOGENIC IMPACT

    Directory of Open Access Journals (Sweden)

    S. V. Pyankov

    2017-01-01

    Full Text Available The paper highlights the features of the creation of the basin GIS, developed to support the environmental monitoring, assessment and forecasting of negative consequences in the areas of technogenic disaster (on the example of abandoned Kizel coal basin, located in Perm Region, Russia. The world experience of applying GIS-technologies for solving environmental problems of coal-mining regions is also being discussed. The information basis and structure of the cartographic and attributive database of the Kizel coal basin GIS are presented. The main tasks of creating the GIS, including inventory of man-made impact sources, identification of the spatio-temporal distribution patterns of pollutants, quantification and mapping of the territory ecological status, forecasting of the environmental situation and planning of environmental measures have been identified. A system of spatial criteria for the integrated assessment of the territory ecological status within coal basins is proposed, which will allow monitoring of environmental changes and identifying areas with the critical environmental situation. These criteria include the pH value and the sulfates concentration in the streams, the complex of heavy metals, the species composition of microorganisms in surface waters, the area of degraded land and dead forest stands. The degree of negative impact of the abandoned coal mines on streams and groundwater is described, and the priority pollutants are identified.The estimates of the extent of contaminated streams, as well as areas of potential contamination of floodplain lands have been obtained using LANDSAT satellite imagery data. The significance of the creation of the algorithms for the integration of heterogeneous spatial information (ground-based and remote sensing observations for compiling synthetic maps that objectively estimate the ecological situation has been noted. 

  13. A method of groundwater quality assessment based on fuzzy network-CANFIS and geographic information system (GIS)

    Science.gov (United States)

    Gholami, V.; Khaleghi, M. R.; Sebghati, M.

    2017-11-01

    The process of water quality testing is money/time-consuming, quite important and difficult stage for routine measurements. Therefore, use of models has become commonplace in simulating water quality. In this study, the coactive neuro-fuzzy inference system (CANFIS) was used to simulate groundwater quality. Further, geographic information system (GIS) was used as the pre-processor and post-processor tool to demonstrate spatial variation of groundwater quality. All important factors were quantified and groundwater quality index (GWQI) was developed. The proposed model was trained and validated by taking a case study of Mazandaran Plain located in northern part of Iran. The factors affecting groundwater quality were the input variables for the simulation, whereas GWQI index was the output. The developed model was validated to simulate groundwater quality. Network validation was performed via comparison between the estimated and actual GWQI values. In GIS, the study area was separated to raster format in the pixel dimensions of 1 km and also by incorporation of input data layers of the Fuzzy Network-CANFIS model; the geo-referenced layers of the effective factors in groundwater quality were earned. Therefore, numeric values of each pixel with geographical coordinates were entered to the Fuzzy Network-CANFIS model and thus simulation of groundwater quality was accessed in the study area. Finally, the simulated GWQI indices using the Fuzzy Network-CANFIS model were entered into GIS, and hence groundwater quality map (raster layer) based on the results of the network simulation was earned. The study's results confirm the high efficiency of incorporation of neuro-fuzzy techniques and GIS. It is also worth noting that the general quality of the groundwater in the most studied plain is fairly low.

  14. Tracking 3D Moving Objects Based on GPS/IMU Navigation Solution, Laser Scanner Point Cloud and GIS Data

    Directory of Open Access Journals (Sweden)

    Siavash Hosseinyalamdary

    2015-07-01

    Full Text Available Monitoring vehicular road traffic is a key component of any autonomous driving platform. Detecting moving objects, and tracking them, is crucial to navigating around objects and predicting their locations and trajectories. Laser sensors provide an excellent observation of the area around vehicles, but the point cloud of objects may be noisy, occluded, and prone to different errors. Consequently, object tracking is an open problem, especially for low-quality point clouds. This paper describes a pipeline to integrate various sensor data and prior information, such as a Geospatial Information System (GIS map, to segment and track moving objects in a scene. We show that even a low-quality GIS map, such as OpenStreetMap (OSM, can improve the tracking accuracy, as well as decrease processing time. A bank of Kalman filters is used to track moving objects in a scene. In addition, we apply non-holonomic constraint to provide a better orientation estimation of moving objects. The results show that moving objects can be correctly detected, and accurately tracked, over time, based on modest quality Light Detection And Ranging (LiDAR data, a coarse GIS map, and a fairly accurate Global Positioning System (GPS and Inertial Measurement Unit (IMU navigation solution.

  15. The use of GIS and modelling approaches in squirrel population management and conservation: A review

    Science.gov (United States)

    P. W. W. Lurz; J. L. Koprowski; D. J. A. Wood

    2008-01-01

    We review modelling approaches in relation to three key areas of sciurid ecology: management, disease risk assessments and conservation. Models enable us to explore different scenarios to develop effective management and conservation strategies. They may also assist in identifying and targeting research needs for tree and flying squirrels. However, there is a need to...

  16. Using Geographical Information Systems (GIS) as an instrument of water resource management: a case study from a GIS-based Water Safety Plan in Germany.

    Science.gov (United States)

    Wienand, I; Nolting, U; Kistemann, T

    2009-01-01

    Following international developments and the new WHO Drinking Water Guidelines (WHO 2004) a process-orientated concept for risk, monitoring and incident management has been developed and implemented in this study. The concept will be reviewed with special consideration for resource protection (first barrier of the multi-barrier system) and in turn, for the Water Safety Plan (WSP) which adequately considers-beyond the current framework of legal requirements-possible new hygienic-microbiologically relevant risks (especially emerging pathogens) for the drinking water supply. The development of a WSP within the framework of risk, monitoring and incident management includes the application of Geographical Information Systems (GIS). In the present study, GIS was used for visualization and spatial analysis in decisive steps in the WSP. The detailed process of GIS-supported implementation included the identification of local participants and their tasks and interactions as an essential part of risk management. A detailed ecological investigation of drinking water conditions in the catchment area was conducted in addition to hazard identification, risk assessment and the monitoring of control measures. The main task of our study was to find out in which steps of the WSP the implementation of GIS could be integrated as a useful, and perhaps even an essential tool.

  17. Managing the maintainance and conservation of the built heritage: a web-gis approach for the Richini courtyard in Milan

    Science.gov (United States)

    Toniolo, L.; Gulotta, D.; Bertoldi, M.; Bortolotto, S.

    2012-04-01

    The Richini courtyard is a masterpiece of northern Italy baroque and it is part of the complex that currently hosts the "Università degli Studi" of Milan. Its four internal façades are based on a double arcade structure with granitic columns along a rectangular plan. The architectural elements are enriched by an outstanding sculpted decoration made of Angera stone (a typical Lombard dolostone) with bas-relief panels, high-relief figures, mouldings and voussoirs. The courtyard suffers the consequences of a troubled conservation history: the Second World War bombardment caused devastating damages to both the structure and the sculpted surfaces, so that an extensive restoration was carried out during the early fifties. Moreover, a further and massive conservative intervention was required during the nineties due to the increasing degradation rate of the Angera stone subjected to severely polluted environmental conditions. The overall durability of this last intervention, as well as the long-term compatibility of the restoration materials, has been evaluated almost twenty years later, in 2011. A thorough study of representative areas of the courtyard has been conducted by a multi-disciplinary research group. The aim of the study was the evaluation of the state of conservation of the ancient and restoration materials, as well as the identification of the decay phenomena. A high-accurate 3D laser scanner survey of the courtyard has been performed as well. The results of the diagnostic activity has been summarised in the present work. The wide range of different type of data (analytical and geometrical data, historical records, photographic documentation) have been managed by the latest release of a web-GIS software specifically designed for the application in the built heritage conservation. A new data structure has been purposely designed in order to maximize the efficiency for what concerning data entry, data query and data updating. The enhanced web-GIS software has

  18. Ocena zmiany warunków hydrologicznych na terenach zurbanizowanych z wykorzystaniem technik GIS = GIS-based assessment of changes related to hydrological conditions in urban areas

    Directory of Open Access Journals (Sweden)

    Danuta Szumińska

    2015-05-01

    email: dszum@ukw.edu.pl1   Streszczenie   W artykule zaprezentowano możliwości wykorzystania technik GIS do przeprowadzenia analizy zmiany warunków hydrologicznych. Badania przeprowadzono na terenie zurbanizowanym, na którym dokonano zmian rzeźby oraz sposobu użytkowania terenu. Spowodowało to pojawieniem się problemów z odwodnieniem terenu, przede wszystkim w czasie wzmożonego zasilania z opadów deszczu i roztopów śniegu. W celu określenia przyczyn występujących problemów porównano rzeźbę terenu oraz wyznaczono kierunki odpływu wód powierzchniowych przed i po zagospodarowaniu działki d (Ryc. 1. Czasochłonne i kosztochłonne badania geologiczne wykonano w minimalnym zakresie (Tab. 1 i zostały one wykorzystane jako informacja uzupełniająca, pozwalająca na ocenę możliwości infiltracji wody w podłoże. Na podstawie przeprowadzonych badań stwierdzono, że główne przyczyny problemów z odwodnieniem terenu związane są ze stworzeniem barier w postaci podmurówek ogrodzeń zlokalizowanych prostopadle do kierunków odpływu wody (Fot. 1, Fot. 2. Zmiany rzeźby były w analizowanym przypadku czynnikiem mniej istotnym.   Słowa kluczowe: warunki hydrologiczne, infiltracja, model rzeźby terenu, kierunki odpływu, użytkowanie terenu, tereny zurbanizowane.   Abstract   The paper discusses the possibilities of employing GIS for conducting analysis of changes in hydrological conditions. The study was carried out in an urban area featuring altered relief and use of land. This caused