WorldWideScience

Sample records for gigantic luminescence emission

  1. Luminescent solar concentrators utilizing stimulated emission.

    Science.gov (United States)

    Kaysir, Md Rejvi; Fleming, Simon; MacQueen, Rowan W; Schmidt, Timothy W; Argyros, Alexander

    2016-03-21

    Luminescent solar concentrators (LSCs) are an emerging technology that aims primarily to reduce the cost of solar energy, with great potential for building integrated photovoltaic (PV) structures. However, realizing LSCs with commercially viable efficiency is currently hindered by reabsorption losses. Here, we introduce an approach to reducing reabsorption as well as improving directional emission in LSCs by using stimulated emission. Light from a seed laser (potentially an inexpensive laser diode) passes through the entire area of the LSC panel, modifying the emission spectrum of excited dye molecules such that it is spectrally narrower, at wavelengths that minimize reabsorption to allow net gain in the system, and directed towards a small PV cell. A mathematical model, taking into account thermodynamic considerations, of such a system is presented which identifies key parameters and allows evaluation in terms of net effective output power.

  2. Defect-related luminescent materials: synthesis, emission properties and applications.

    Science.gov (United States)

    Zhang, Cuimiao; Lin, Jun

    2012-12-07

    Luminescent materials have found a wide variety of applications, including information displays, lighting, X-ray intensification and scintillation, and so on. Therefore, much effort has been devoted to exploring novel luminescent materials so far. In the past decade, defect-related luminescent materials have inspired intensive research efforts in their own right. This kind of luminescent material can be basically classified into silica-based materials, phosphate systems, metal oxides, BCNO phosphors, and carbon-based materials. These materials combine several favourable attributes of traditional commercially available phosphors, which are stable, efficient, and less toxic, being free of the burdens of intrinsic toxicity or elemental scarcity and the need for stringent, intricate, tedious, costly, or inefficient preparation steps. Defect-related luminescent materials can be produced inexpensively and on a large scale by many approaches, such as sol-gel process, hydro(solvo)thermal reaction, hydrolysis methods, and electrochemical methods. This review article highlights the recent advances in the chemical synthesis and luminescent properties of the defect-related materials, together with their control and tuning, and emission mechanisms (solid state physics). We also speculate on their future and discuss potential developments for their applications in lighting and biomedical fields.

  3. Partial gigantism

    Directory of Open Access Journals (Sweden)

    М.М. Karimova

    2017-05-01

    Full Text Available A girl with partial gigantism (the increased I and II fingers of the left foot is being examined. This condition is a rare and unresolved problem, as the definite reason of its development is not determined. Wait-and-see strategy is recommended, as well as correcting operations after closing of growth zones, and forming of data pool for generalization and development of schemes of drug and radial therapeutic methods.

  4. Condiloma gigante

    OpenAIRE

    Brunno Cezar Framil Sanches; Lineu Amaro Rodrigues Júnior; Felipe Trentin Neves; Thiago Correa Tambelli; Fernando Eduardo Paulatti Frederico; Fátima Mohamad All Haj; Juliana Monteiro de Abreu; Tatiana Milunovic Lobo Rosa; Alexis Iury Framil Sanches; Antonio Alberto Ramos Argento

    2011-01-01

    O condiloma gigante está altamente associado à infecção pelo Papiloma Vírus Humano (HPV), uma das doenças sexualmente transmissíveis mais prevalentes no mundo. Paciente de 54 anos, com aparecimento de lesão vegetante em região suprapúbica de crescimento progressivo há 20 anos. Realizou tratamento prévio de condiloma peniano com cauterização com sucesso. A lesão teve crescimento significativo e foi, então, submetido à biópsia com diagnóstico histológico de condiloma acuminado. A terapia eleita...

  5. Condiloma gigante

    Directory of Open Access Journals (Sweden)

    Brunno Cezar Framil Sanches

    2011-09-01

    Full Text Available O condiloma gigante está altamente associado à infecção pelo Papiloma Vírus Humano (HPV, uma das doenças sexualmente transmissíveis mais prevalentes no mundo. Paciente de 54 anos, com aparecimento de lesão vegetante em região suprapúbica de crescimento progressivo há 20 anos. Realizou tratamento prévio de condiloma peniano com cauterização com sucesso. A lesão teve crescimento significativo e foi, então, submetido à biópsia com diagnóstico histológico de condiloma acuminado. A terapia eleita foi a exérese completa da lesão. A terapia invasiva se torna opção terapêutica de eleição, indicada por todos os estudos analisados. No caso em questão, a opção terapêutica foi a retirada completa da lesão devido à recorrência do quadro após terapias de cauterização química e térmica. Apesar de a abordagem cirúrgica ser uma conduta mais agressiva, no paciente em questão foi adequada por conta do tamanho e da falha de terapias anteriores.

  6. Characterization of a nondestructive beam profile monitor using luminescent emission

    Directory of Open Access Journals (Sweden)

    A. Variola

    2007-12-01

    Full Text Available The LHC (large hadron collider [LHC study group: LHC. The large hadron collider conceptual design; CERN/AC/95-05] is the future p-p collider under construction at CERN, Geneva. Over a circumference of 26.7 km a set of cryogenic dipoles and rf cavities will store and accelerate proton and ion beams up to energies of the order of 7 TeV. Injection in LHC will be performed by the CERN complex of accelerators, starting from the source and passing through the linac, the four booster rings, the proton synchrotron (PS, and super proton synchrotron (SPS accelerators. One of the main constraints on LHC performance is emittance preservation along the whole chain of CERN accelerators. The accepted relative normalized emittance blowup after filamentation is ±7%. To monitor the beam and the emittance blowup process, a study of different prototypes of nonintercepting beam profile monitors has been performed. In this context a monitor using the luminescent emission of gases excited by ultrarelativistic protons (450 GeV was developed and tested in the SPS ring. The results of beam size measurements and their evolution as a function of the machine parameters are presented. The image quality and resolution attainable in the LHC case have been assessed. A first full characterization of the luminescence cross section, spectrum, decay time, and afterglow effect for an ultrarelativistic proton beam is provided. Some significant results are also provided for lead ion beams.

  7. Luminescent Organometallic Nanomaterials with Aggregation-Induced Emission.

    Science.gov (United States)

    Shu, Tong; Wang, Jianxing; Su, Lei; Zhang, Xueji

    2018-07-04

    Recent researches in metal nanoclusters (NCs) have prompted their promising practical applications in biomedical fields as novel inorganic luminophores. More recently, to further improve the photoluminescence (PL) performance of NCs, the aggregation-induced emission (AIE) effect has been introduced to develop highly luminescent metal NCs and metal complex materials. In this review, we start our discussion from recent progresses on AIE materials developments. Then, we address our understandings on the PL properties of thiolated metal NCs. Subsequently, we link thiolated metal NCs with AIE effect. We also highlight some recent advances in synthesizing the AIE-type metal complex nanomaterials. We finally discuss visions and directions for future development of AIE-type metal complex nanomaterials.

  8. Conversion of the luminescence of laser dyes in opal matrices to stimulated emission

    International Nuclear Information System (INIS)

    Alimov, O K; Basiev, T T; Orlovskii, Yu V; Osiko, V V; Samoilovich, M I

    2008-01-01

    The luminescence and laser characteristics of a synthetic opal matrix filled with organic dyes are studied upon excitation by nanosecond laser pulses. The appearance of stimulated emission in a partially ordered scattering medium is investigated. It is shown that if the luminescence spectrum of a dye (oxazine-17) is located far outside the photonic bandgap of the opal matrix, stimulated emission along a preferential direction in the (111) plane is observed when pumping exceeds a threshold even without an external optical cavity. The stimulated emission spectrum is considerably narrower than the luminescence spectrum and consists of several narrow lines located within the dye luminescence band. If the luminescence spectrum of a dye (rhodamine 6G) overlaps with the photonic bandgap of the opal matrix, a different picture is observed. The loss of radiation in the matrix leads to the red shift of the luminescence spectrum, while the stimulated emission as in the case of oxazine-17 lies is observed within the luminescence band. (active media, lasers, and amplifiers)

  9. Characterization of a nondestructive beam profile monitor using luminescent emission

    CERN Document Server

    Variola, A; Ferioli, G

    2007-01-01

    The LHC (large hadron collider) [LHC study group: LHC. The large hadron collider conceptual design; CERN/AC/95-05] is the future p-p collider under construction at CERN, Geneva. Over a circumference of 26.7 km a set of cryogenic dipoles and rf cavities will store and accelerate proton and ion beams up to energies of the order of 7 TeV. Injection in LHC will be performed by the CERN complex of accelerators, starting from the source and passing through the linac, the four booster rings, the proton synchrotron (PS), and super proton synchrotron (SPS) accelerators. One of the main constraints on LHC performance is emittance preservation along the whole chain of CERN accelerators. The accepted relative normalized emittance blowup after filamentation is ±7%. To monitor the beam and the emittance blowup process, a study of different prototypes of nonintercepting beam profile monitors has been performed. In this context a monitor using the luminescent emission of gases excited by ultrarelativistic protons (450 GeV) ...

  10. Excitation and emission spectrometry of stimulated luminescence from quartz and feldspars

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.; Duller, G.A.T.; Poolton N.R.J.

    1994-01-01

    A new scanning monochromator was designed to investigate the wavelength-resolved luminescence excitation and emission characteristics of quartz and feldspar samples; results are presented together with detailed measurements of the thermal activation energies required for luminescence stimulation...... in feldspar over the wavelength range 400-1000 nm. When coupled to automated dating equipment, we demonstrate that optical characteristics of sample selected for dating can be routinely measured, or more detailed analysis of physical processes can be made....

  11. Tunable colors and white-light emission based on a microporous luminescent Zn(II)-MOF.

    Science.gov (United States)

    He, Hongming; Sun, Fuxing; Borjigin, Tsolmon; Zhao, Nian; Zhu, Guangshan

    2014-03-07

    Metal-organic frameworks (MOFs) are a rapidly growing class of hybrid materials with many multifunctional properties. The permanent porosity plays a central role in the functional properties. In particular, the luminescent MOFs with a permanent porosity have wide applications in guest species recognition and adsorption. In this contribution, we aim to develop tunable colors and white-light luminescence materials by the encapsulation of Ln(3+) species in microporous luminescent MOFs. A semi-rigid trivalent carboxylic acid 1,3,5-tri(4-carboxyphenoxy)benzene (H3TCPB) was selected as the organic building block, not only because it is suitable to construct microporous frameworks, but also by reason of its blue luminescent emission. Under solvothermal reactions, a microporous MOF material, [Zn3(TCPB)2(H2O)2]·2H2O·4DMF (JUC-113, JUC = Jilin University, China), was synthesized, which has a permanent porosity and emits blue light. According to three-primary colors, the guest luminescent species should be Tb(3+) and Eu(3+) owing to their distinctive colors (Tb(3+), green; Eu(3+), red). In addition, the luminescent properties of JUC-113 can be easily tuned by different combinations of the encapsulation amount of Tb(3+) and Eu(3+), obtaining white-light emission materials.

  12. Strong Circularly Polarized Luminescence from Highly Emissive Terbium Complexes in Aqueous Solution

    Energy Technology Data Exchange (ETDEWEB)

    Samuel, Amanda; Lunkley, Jamie; Muller, Gilles; Raymond, Kenneth

    2010-03-15

    Two luminescent terbium(III) complexes have been prepared from chiral ligands containing 2-hydroxyisophthalamide (IAM) antenna chromophores and their non-polarized and circularly-polarized luminescence properties have been studied. These tetradentate ligands, which form 2:1 ligand/Tb{sup III} complexes, utilize diaminocyclohexane (cyLI) and diphenylethylenediamine (dpenLI) backbones, which we reasoned would impart conformational rigidity and result in Tb{sup III} complexes that display both large luminescence quantum yield ({phi}) values and strong circularly polarized luminescence (CPL) activities. Both Tb{sup III} complexes are highly emissive, with {phi} values of 0.32 (dpenLI-Tb) and 0.60 (cyLI-Tb). Luminescence lifetime measurements in H{sub 2}O and D{sub 2}O indicate that while cyLI-Tb exists as a single species in solution, dpenLI-Tb exists as two species: a monohydrate complex with one H{sub 2}O molecule directly bound to the Tb{sup III} ion and a complex with no water molecules in the inner coordination sphere. Both cyLI-Tb and dpenLI-Tb display increased CPL activity compared to previously reported Tb{sup III} complexes made with chiral IAM ligands. The CPL measurements also provide additional confirmation of the presence of a single emissive species in solution in the case of cyLI-Tb, and multiple emissive species in the case of dpenLI-Tb.

  13. Thermochromic Luminescent Materials and Multi-Emission Bands in d10Clusters.

    Science.gov (United States)

    Gautier, Romain; Latouche, Camille; Paris, Michael; Massuyeau, Florian

    2017-03-30

    Thermochromic luminescent compounds with d 10 metal ions are interesting materials for applications such as sensors or display devices. However, these properties are difficult to predict prior to their synthesis. In this communication, we investigated materials with structural assemblies known to be responsible of distinct luminescence mechanisms and show that they can be interesting potential thermometers. Thus, we compared the synthesis of a zinc halide and a copper halide based compounds which only differ in their ability to create clusters with metallophilic interactions. The compounds synthesized by hydrothermal method have been structurally characterized by Single-crystal X-ray diffraction, Solid-State NMR, FTIR, UV-Visible spectroscopy, thermal analysis and EPR. The photoluminescence properties of the two materials have been characterized at different temperatures. The copper bromide compound shows luminescence thermochromism in a wide spectrum of colors owing to the formation of clusters generating multi-emission bands while the zinc bromide exhibits a single emission band and no thermochromism.

  14. Control of spontaneous emission rate in luminescent resonant diamond particles

    Science.gov (United States)

    Savelev, R.; Zalogina, A.; Kudryashov, S.; Ivanova, A.; Levchenko, A.; Makarov, S.; Zuev, D.; Shadrivov, I.

    2018-01-01

    We study the properties of luminescent diamond particles of different sizes (up to ~1.5 μm) containing multiple NV-centers. We theoretically predict that the average liftetime in such particles is decreased by several times as compared to optically small subwavelength nanodiamonds. In our experiments, samples were obtained by milling the plasma-enhanced chemical vapor deposited diamond film, and characterized by Raman spectroscopy and dark- field spectroscopy methods. Time-resolved luminescence measurements of the excited state of NV-centers showed that their average lifetime varies from 10 to 17 ns in different samples. By comparing this data to the values of the lifetime of the NV-centers in optically small nanodiamonds, known from literature, we confirm a severalfold decrease of the lifetime in resonant particles.

  15. Discernment of lint trash in raw cotton using multivariate analysis of excitation-emission luminescence spectra

    Science.gov (United States)

    Excitation-Emission luminescence spectra of basic (pH 12.5) phosphate buffer solution extracts were used to distinguish among botanical components of trash within seed cotton. All components were separated from whole plants removed from a field in southern New Mexico. Unfolded Principal Component An...

  16. Stimulated luminescence emission from localized recombination in randomly distributed defects

    DEFF Research Database (Denmark)

    Jain, Mayank; Guralnik, Benny; Andersen, Martin Thalbitzer

    2012-01-01

    408–15) which assumes a fixed d → a tunnelling probability for the entire crystal, our model is based on nearest-neighbour recombination within randomly distributed centres. Such a random distribution can occur through the entire volume or within the defect complexes of the dosimeter, and implies...... that the tunnelling probability varies with the donor–acceptor (d–a) separation distance. We first develop an ‘exact kinetic model’ that incorporates this variation in tunnelling probabilities, and evolves both in spatial as well as temporal domains. We then develop a simplified one-dimensional, semi-analytical model...... results in a highly asymmetric TL peak; this peak can be understood to derive from a continuum of several first-order TL peaks. Our model also shows an extended power law behaviour for OSL (or prompt luminescence), which is expected from localized recombination mechanisms in materials with random...

  17. Light emission and luminescence enhancement in Erbium Oxide nanoparticles

    Science.gov (United States)

    Wilkinson, Lynda; Maqbool, Muhammad; Ahmad, Iftikhar

    2011-10-01

    We reports light emission from Erbium Oxide nanoparticles. The nanoparticles, with 45 nm diameter, were obtained in the form of nanopowder. These nanoparticles were characterized for light emission under a 30 mW, 532 nm Nd:YAG laser excitation and a Photoluminescence (PL) system, made by Princeton Instrumentation, with a Pixis brand CCD camera. The nanoparticles were stick on a scotch tape and placed in the PL system. Spectrum of the light emitted from the nanoparticles was obtained and analyzed after subtracting the background spectrum. Two emission peaks were observed around 554 nm and 820 nm. The green emission at 554 nm was obtained as a result of ^2H11/2 ->^4I15/2 transition, and the near infrared emission from ^4I9/2->^4I15/2 transition. The process was also repeated in vacuum and it was found that the green emission enhances tremendously, showing the importance of Erbium Oxide nanoparticles optical and biophotonics applications.

  18. Hybrid silica luminescent materials based on lanthanide-containing lyotropic liquid crystal with polarized emission

    Energy Technology Data Exchange (ETDEWEB)

    Selivanova, N.M., E-mail: natsel@mail.ru [Kazan National Research Technological University, 68 Karl Marx Str., Kazan 420015 (Russian Federation); Vandyukov, A.E.; Gubaidullin, A.T. [A.E. Arbuzov Institute of Organic and Physical Chemistry of the Kazan Scientific Center of the Russian Academy of Sciences, 8 Acad. Arbuzov Str., Kazan 420088 (Russian Federation); Galyametdinov, Y.G. [Kazan National Research Technological University, 68 Karl Marx Str., Kazan 420015 (Russian Federation)

    2014-11-14

    This paper represents the template method for synthesis of hybrid silica films based on Ln-containing lyotropic liquid crystal and characterized by efficient luminescence. Luminescence films were prepared in situ by the sol–gel processes. Lyotropic liquid crystal (LLC) mesophases C{sub 12}H{sub 25}O(CH{sub 2}CH{sub 2}O){sub 10}H/Ln(NO{sub 3}){sub 3}·6H{sub 2}O/H{sub 2}O containing Ln (III) ions (Dy, Tb, Eu) were used as template. Polarized optical microscopy, X-ray powder diffraction, and FT-IR-spectroscopy were used for characterization of liquid crystal mesophases and hybrid films. The morphology of composite films was studied by the atomic force microscopy method (AFM). The optical properties of the resulting materials were evaluated. It was found that hybrid silica films demonstrate significant increase of their lifetime in comparison with an LLC system. New effects of linearly polarized emission revealed for Ln-containing hybrid silica films. Polarization in lanthanide-containing hybrid composites indicates that silica precursor causes orientation of emitting ions. - Highlights: • We suggest a new simple approach for creating luminescence hybrid silica films. • Ln-containing hybrid silica films demonstrate yellow, green and red emissions. • Tb(III)-containing hybrid film have a high lifetime. • We report effects of linearly polarized emission in hybrid film.

  19. Bismuth Complexes in Phenylazomethine Dendrimers: Controllable Luminescence and Emission in the Solid State.

    Science.gov (United States)

    Kambe, Tetsuya; Watanabe, Aiko; Imaoka, Takane; Yamamoto, Kimihisa

    2016-10-10

    Dendritic phosphors were obtained by the stepwise integration of BiCl 3 in phenylazomethine dendrimers. The bismuth-coordinated phenylazomethines displayed photoluminescence at 500-800 nm, and the intensity could be tuned by changing the stoichiometry of BiCl 3 and the dendrimer. This phosphor did not show serious luminescence quenching even though the local concentration of BiCl 3 in the dendrimer was as high as 20 M, and luminescence was also observed in the solid state. The absorption and emission properties could be reversibly switched by addition of a Lewis base or under electrochemical redox control, which induced the reversible complexation of BiCl 3 in the dendrimer. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Long-lived luminescent soft materials of hexanitratosamarate(III) complexes with orange visible emission.

    Science.gov (United States)

    Tang, Ning; Zhao, Ying; He, Ling; Yuan, Wen-Li; Tao, Guo-Hong

    2015-05-21

    Sm(III)-based ionic liquids incorporating hexanitratosamarate(III) anions were obtained and fully characterized as novel Sm(III)-containing organic complexes. The structure of the ionic liquids was determined by single-crystal X-ray diffraction (1: monoclinic system C2/c space group with cell parameters: a = 19.5624(4) Å, b = 10.11895(18) Å, c = 33.2256(6) Å, β = 101.2912(18)°, Z = 8). The central Sm(III) ion is 12-coordinated by six bidentate nitrate ligands with twelve oxygen donors to form a [Sm(NO3)6](3-) anion. The low melting point, high thermostability and wide liquid range of these ionic liquids were determined in detail. All the complexes 1-5 display orange luminescence, rather than red luminescence as in most Sm(III)-containing organic complexes. Three characteristic monochromatic bands and an intense emission, derived from (4)G5/2→(6)HJ (J = 5/2, 7/2, and 9/2) intraconfigurational f-f transitions, were revealed. All these complexes exhibit long luminescence lifetimes.

  1. Linfedema escrotal gigante

    Directory of Open Access Journals (Sweden)

    C. Carrasco López

    2013-06-01

    Full Text Available La elefantiasis escrotal es una condición que ha sido historicamente descrita en áreas endémicas de filariasis, siendo menos frecuente su presentación idiopática o asociada a otras entidades. Presentamos un caso de elefantiasis escrotal gigante de causa adquirida al que se le practicó exéresis de estructura linfadematosa con reconstrucción con colgajo local y autoinjerto cutáneo. El caso clínico presentado es raro, ya sea por la baja frecuencia o por su etiología, así como por la importante magnitud del problema. Por esta razón hemos decidido presentarlo para dar a conocer posibilidades terapéuticas y realizar una revisión del tema.

  2. Quiste gigante de ovario

    Directory of Open Access Journals (Sweden)

    Dagoberto Calderón Rodríguez

    2014-08-01

    Full Text Available Un crecimiento quístico del ovario debe medir por lo menos 2,5 cm de diámetro para denominarse quiste. Se presenta el caso de una paciente de 36 años, femenina, perteneciente a la etnia Wayú, con un quiste gigante en ovario derecho, de aproximadamente 10 cm de diámetro, un peso de 3,6 Kg y torcido sobre su pedículo, que le provoca dolor intenso de más de un mes de evolución. Se practicó intervención quirúrgica y se comprobaron signos macroscópicos de necrobiosis de ovario, siendo el resultado de la biopsia un teratoma maduro. Su resultado final fue satisfactorio

  3. Spatial-resolved cathode luminescence study of S-doped ZnO particles for the luminescence of UV, green and orange band emission

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yuanping, E-mail: ypsun@ytu.edu.cn [Institute of Science and Technology for Opto-electronic Information, Yantai University, Shandong 264005 (China); Guo, Hongying; Jiang, Feihong; Yuan, Run; Zhang, Jun [Institute of Science and Technology for Opto-electronic Information, Yantai University, Shandong 264005 (China); Zeng, Xionghui; Zhou, Taofei; Qiu, Yongxin; Zhang, Baoshun; Xu, Ke; Yang, Hui [Suzhou Institute of Nano-tech and Nano-bionics, Chinese Academy of Sciences, Suzhou 215123 (China)

    2013-10-15

    The hexagonal bi-pillar structures of undoped and sulfur-doped ZnO particles have been synthesized by hydrothermal method to study the relationship between UV and long wavelength emissions, green emission (GE) and orange emission (OE) bands. A room temperature photoluminescence comparison between undoped and sulfur-doped ZnO shows an increase of long wavelength emission, that is presumably due to an increase of defects in doped ZnO. Spatial cathode luminescence (CL) analysis on a single ZnO particle shows a competitive behavior between GE and OE bands. The long wavelength emissions in ZnO are all related to Zn vacancies. GE will dominate if the Zn vacancy-related oxygen stays at lattice point; otherwise OE will dominate if this oxygen atom leaves lattice point to form a interstitial atom.

  4. Thallium and manganese complexes involved in the luminescence emission of potassium-bearing aluminosilicates

    Energy Technology Data Exchange (ETDEWEB)

    Gomez-Gonzalez, Miguel A., E-mail: miguel.gomez@mncn.csic.es [Museo Nacional de Ciencias Naturales, CSIC, Jose Gutierrez Abascal 2, Madrid E-28006 (Spain); Garcia-Guinea, Javier, E-mail: guinea@mncn.csic.es [Museo Nacional de Ciencias Naturales, CSIC, Jose Gutierrez Abascal 2, Madrid E-28006 (Spain); Garrido, Fernando, E-mail: fernando.garrido@mncn.csic.es [Museo Nacional de Ciencias Naturales, CSIC, Jose Gutierrez Abascal 2, Madrid E-28006 (Spain); Townsend, Peter D., E-mail: pdtownsend@gmail.com [School of Science and Technology, University of Sussex, Brighton BN1 9QH (United Kingdom); Marco, Jose-Francisco, E-mail: jfmarco@iqfr.csic.es [Instituto de Química-Física Rocasolano, CSIC, Calle Serrano 119, Madrid E-28006 (Spain)

    2015-03-15

    The luminescence emission at 285 nm in natural K-feldspar has been studied by Russian groups and associated with thallium ions in structural positions of K{sup +} sites as artificially thallium-doped feldspars display the same emission band. Here attention is focussed on spectra of CL emission bands centered near 285 and 560 nm from paragenetic adularia, moscovite and quartz micro-inclusions. With accesorial thallium they show clear resemblances to each other. Associated sedimentary and hydrothermal aluminosilicate samples collected from Guadalix (Madrid, Spain) were analyzed with a wide range of experimental techniques including Environmental Scanning Electron Microscopy (ESEM) with an attached X-Ray Energy-Dispersive Spectrometer (EDS) and a cathodoluminescence probe (CL) and Electron Probe Microanalysis (EPMA), X-Ray Fluorescence Spectrometry (XRF), Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES), Differential and Thermogravimetric Analyses (DTA-TG), radioluminescence (RL), Mössbauer spectroscopy and X-Ray Photoelectron Spectrometry (XPS). The luminescence emission bands at 285 and 560 nm seem to be associated with hydrous thallium–manganese complexes bonded to potassium-bearing aluminosilicates since various minerals such as K-feldspar, moscovite and quartz micro-inclusions display similar CL spectra, accesorial thallium and hydroxyl groups. The presence of iron introduces a brown color which is attributed to submicroscopic iron oxides detectable in the optical and chemical microanalysis, but this does not contribute to the luminescence emission. The XPS Mn 2p spectrum of the adularia sample at room temperature is composed of a spin–orbit doublet plus clear shake-up satellite structure ∼4 eV above the main photoemision lines and is consistent with Mn{sup 2+} in good agreement with the observed luminescence emission at 560 nm for aluminosilicates produced by a {sup 4}T1({sup 4}G)→{sup 6}A1({sup 6}S) transition in tetrahedrally

  5. Luminescent emission of LiF: Mg, Ti exposed to UV radiation

    International Nuclear Information System (INIS)

    Estrada G, A.; Castano M, V.M.; Cruz Z, E.; Garcia F, F.

    2002-01-01

    It was investigated the luminescent emission stimulated by heat (Tl) of LiF: Mg, Ti crystals which were exposed to UV radiation coming from a mercury lamp. Since this crystal depends on the thermal history, it has been used a thermal treatment consisting of a baking at 380 C during one hour for each reading and they were irradiated with UV. The brilliance curves between 5 and 840 minutes of exposure in the face of UV light were obtained. An important loss in the response, starting from 150 minutes of irradiation was observed. Also the relative intensity of the brilliance curve decay when the crystals being stored in darkness and room temperature conditions, which is according to the results in the literature about. (Author)

  6. Ionising radiation effect on the luminescence emission of inorganic and biogenic calcium carbonates

    Energy Technology Data Exchange (ETDEWEB)

    Boronat, C. [CIEMAT, Av. Complutense 40, Madrid 28040 (Spain); Correcher, V., E-mail: v.correcher@ciemat.es [CIEMAT, Av. Complutense 40, Madrid 28040 (Spain); Virgos, M.D. [CIEMAT, Av. Complutense 40, Madrid 28040 (Spain); Garcia-Guinea, J. [CSIC, Museo Nacional Ciencias Naturales, José Gutiérrez Abascal 2, Madrid 28006 (Spain)

    2017-06-15

    Highlights: • Aragonite and biogenic Ca-carbonates could be used as a TL dosimeters. • TL can be employed for retrospective dosimetry purposes. • Calcium carbonates show an acceptable ionizing radiation sensitivity. • The stability of the radiation–induced TL remains, at least, till 700 h. - Abstract: As known, the luminescence emission of mineral phases could be potentially employed for dosimetric purposes in the case of radiological terrorism or radiation accident where conventional monitoring is not available. In this sense, this paper reports on the thermo- (TL) and cathodoluminescence (CL) emission of both biogenic (common periwinkle – littorina littorera – shell made of calcite 90% and aragonite 10%) and inorganic (aragonite 100%) Ca-rich carbonates previously characterized by X-ray diffraction and Raman spectroscopy. Whereas the aragonite sample displays the main CL waveband peaked in the red region (linked to point defects), the more intense emission obtained from the common periwinkle shell appears at higher energies (mainly associated with structural defects). The UV-blue TL emission of the samples, regardless of the origin, displays (i) an acceptable ionizing radiation sensitivity, (ii) linear dose response in the range of interest (up to 8 Gy), (iii) reasonable stability of the TL signal after 700 h of storage with an initial decay of ca. 88% for the mineral sample and 60% for the biogenic sample and maintaining the stability from 150 h onwards. (iv) The tests of thermal stability of the TL emission performed in the range of 180–320 °C confirm a continuum in the trap system.

  7. Ionising radiation effect on the luminescence emission of inorganic and biogenic calcium carbonates

    International Nuclear Information System (INIS)

    Boronat, C.; Correcher, V.; Virgos, M.D.; Garcia-Guinea, J.

    2017-01-01

    Highlights: • Aragonite and biogenic Ca-carbonates could be used as a TL dosimeters. • TL can be employed for retrospective dosimetry purposes. • Calcium carbonates show an acceptable ionizing radiation sensitivity. • The stability of the radiation–induced TL remains, at least, till 700 h. - Abstract: As known, the luminescence emission of mineral phases could be potentially employed for dosimetric purposes in the case of radiological terrorism or radiation accident where conventional monitoring is not available. In this sense, this paper reports on the thermo- (TL) and cathodoluminescence (CL) emission of both biogenic (common periwinkle – littorina littorera – shell made of calcite 90% and aragonite 10%) and inorganic (aragonite 100%) Ca-rich carbonates previously characterized by X-ray diffraction and Raman spectroscopy. Whereas the aragonite sample displays the main CL waveband peaked in the red region (linked to point defects), the more intense emission obtained from the common periwinkle shell appears at higher energies (mainly associated with structural defects). The UV-blue TL emission of the samples, regardless of the origin, displays (i) an acceptable ionizing radiation sensitivity, (ii) linear dose response in the range of interest (up to 8 Gy), (iii) reasonable stability of the TL signal after 700 h of storage with an initial decay of ca. 88% for the mineral sample and 60% for the biogenic sample and maintaining the stability from 150 h onwards. (iv) The tests of thermal stability of the TL emission performed in the range of 180–320 °C confirm a continuum in the trap system.

  8. New AIE-active pyrimidine-based boronfluoride complexes with high solid-state emission and reversible mechanochromism luminescence behavior.

    Science.gov (United States)

    Qi, Fen; Lin, Jianjian; Wang, Xiaoqing; Cui, Peng; Yan, Hui; Gong, Shuwen; Ma, Chunlin; Liu, Zhipeng; Huang, Wei

    2016-04-25

    A new family of pyrimidine-based BF2 complexes () with aggregation-induced emission (AIE) and mechanochromic luminescence properties were developed. These compounds exhibit intense fluorescence in their aggregation/solid-state resulting from their large Stokes shift and AIE. X-ray crystallographic analysis shows that the weak intermolecular interactions by fixing the molecular conformations of are responsible for the intense fluorescence in solid-state. In addition to their pronounced AIE behaviour, also exhibits a reversible chromic response to grinding, and a distinct red-shift of emission is observed. The high solid-state luminescence and grinding-stimuli response properties of these compounds make them potential candidates for smart materials.

  9. Dual luminescence in solid CuI(piperazine): hypothesis of an emissive 1-D delocalized excited state.

    Science.gov (United States)

    Maini, L; Braga, D; Mazzeo, P P; Maschio, L; Rérat, M; Manet, I; Ventura, B

    2015-08-07

    Solid [CuI(piperazine)0.5]∞, characterized by a structure with an infinite double chain of CuI, presents an unexpected dual luminescence. The short copper-copper distances allow the existence of both cluster-centered and 1-D delocalized electronic transitions, as emerged from theoretical calculations. Beyond the more common cluster-centered emission a higher energy band, which differs in lifetime and in temperature dependence, is observed.

  10. On the role of non-bridging oxygen centers in the red luminescence emission from silicon nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Borsella, Elisabetta; D' Amato, Rosaria; Fabbri, Fabio [ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati, Roma (Italy); Falconieri, Mauro [ENEA, C. R. Casaccia, via Anguillarese 301, 00123 Roma (Italy); Trave, Enrico [Physical Chemistry Department, Universita Ca' Foscari Venezia, Dorsoduro 2137, 30123 Venezia (Italy); Bello, Valentina; Mattei, Giovanni [Physics Department, Universita degli Studi di Padova, Via Marzolo 8, 35131 Padova (Italy); Nie, Yaru; Wang, Dayang [Max Planck Institute of Colloids and Interfaces, 14424 Potsdam (Germany)

    2011-03-15

    The process responsible for visible-near infrared luminescence emission in Si nanostructures has been generating significant controversy for years. The debate has focused on whether light emission is originated by recombination of quantum confined excitons or by defects located at the surface. It is experimentally difficult to distinguish the two contributions since both are size-dependent. Moreover, all the studies were performed on different systems and consequently the comparisons were not free from ambiguities. Here we relate the spectroscopic properties of pyrolytic Si nanocrystals, aged in air, and after complete conversion to amorphous silica by alkali etching-assisted oxidation. The strong resemblance of the spectral and time decay behavior of the red PL emission in both systems (surface oxidized nanocrystalline Si and amorphous silica sample) indicates that this emission is dominated by defects in the silicon oxide. The strongly non-exponential time behavior of the photo-luminescence emission in both systems can be modeled as the sum of exponential decays from the emitting defects, thus ruling out the interpretation in terms of the so-called ''stretched exponential'' decay. Using this model we also obtained the emission energy and inhomogeneous linewidth of the luminescent defects, allowing us to identify them as the non-bridging oxygen hole centers. The emission energy of these defects depends strongly on their physical and chemical environment and can produce a shift apparently due to the size effect. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  11. luminescence properties

    Indian Academy of Sciences (India)

    EDX analysis were taken with LEO 440 model scanning electron microscope using an accelerating voltage of 20 kV. The excitation and emission spectra of phosphors were recorded by Perkin Elmer LS 45 model luminescence spec- trophotometer with xenon lamp. Thermoluminescence (TL) glow curves of phosphors were.

  12. The Design of Dual-Emissive Composite Material [Zn2(HL)3]+@MOF-5 as Self-Calibrating Luminescent Sensors of Al3+Ions and Monoethanolamine.

    Science.gov (United States)

    Wu, Meng-Meng; Wang, Jiao-Yang; Sun, Rui; Zhao, Cui; Zhao, Jiong-Peng; Che, Guang-Bo; Liu, Fu-Chen

    2017-08-21

    Introducing another chromophore into a luminescent MOF is a potential way to assembling novel dual-emissive luminescent materials. Putting the chromophore, for which luminescence can be enhanced by Zn 2+ ion, into MOF-5 by the "bottle around ship" strategy is a simple but efficient synthesis method to realize such dual-emissive materials. According to this strategy, a novel dual-emissive luminescent composite material [Zn 2 (HL) 3 ] + @MOF-5 was constructed by loading the [La 3 (HL) 2 L 2 (NO 3 ) 3 H 2 O] (1) (H 2 L = 7,7'-(ethane-1,1'-diyl)8-hydro-quinoline) into MOF-5, in which the [Zn 2 (HL) 3 ] + anions were transformed from 1 with the existence of Zn 2+ . The dual-emissive composite materials show excellent luminescence with two emissions of MOF-5 at 410 nm and [Zn 2 (HL) 3 ] + at 524 nm. Furthermore, by combining characteristics of MOF-5 and the guest chromophore, the composite material is highly selectively sensitive toward Al 3+ and monoethanolamine, which makes [Zn 2 (HL) 3 ] + @MOF-5 a potential self-calibrated fluorescence sensor.

  13. Critical view on the luminescence emission of ZnO, ZnO:Eu and ZnO: Eu/Y2O3

    International Nuclear Information System (INIS)

    Robindro Singh, L.; Prasad, Amresh I.; Gogoi, Manashjit

    2013-01-01

    Development of advanced display and lighting technology such as field emission displays and plasma display panels requires phosphor which has a high efficiency and low degradation. Particle sizes and the locations of dopants in the hosts take an important role in the luminescence emission properties of phosphors. ZnO is widely employed in plasma field emission display devices and widely investigated, still lanthanide (Ln 3+ ) ion doped ZnO need more investigations. In ZnO:Eu the lanthanide ions (Eu 3+ ) may occupy either Zn 2+ lattice site or on surface of ZnO crystal. The emissions of Eu 3+ ion on the surface are the characteristic of Eu 2 O 3 , leads to weak luminescence emission. To study such phenomena nanoparticles of ZnO, 2 at % Eu 3+ doped ZnO (ZnO:Eu) and ZnO:Eu covered with yttria matrix were prepared by wet chemical method at low temperature. The prepared nanoparticles were characterized by XRD and TEM. XRD data reveals significant phase segregation of the annealed nanoparticles compared to lower heated samples. This phase segregation of Eu 3+ ion establishes responsible for the decrease luminescence intensity of annealed ZnO:Eu nanoparticles compared to the as-prepared ZnO:Eu nanoparticles. Improvement on luminescence emissions could be achieved only for the as-prepared ZnO:Eu nanoparticles while covered with yttria matrix. Annealing the phosphors crystallization of Y 2 O 3 starts, the Eu 3+ leave ZnO site and enter Y 3+ site in Y 2 O 3 hence contribute luminescence emission. Incorporation the ZnO:Eu nanoparticles in Y 2 O 3 , significantly prevent the phase segregation of europium oxide by allowing it diffuse into the amorphous environment of Y 2 O 3 and thereby enhanced the luminescence for such samples. (author)

  14. Luminescent materials: probing the excited state of emission centers by spectroscopic methods

    Science.gov (United States)

    Mihóková, E.; Nikl, M.

    2015-01-01

    We review recent methods employed to study the excited state of rare-earth centers in various luminescent and scintillating materials. The focus is on processes that help determine localization of the excited state within the material band gap, namely photoionization and thermally stimulated ionization. Then the tunneling process between the luminescence center and the trapping state is addressed. We describe the experimental implementation of methods recently developed to study these processes. We report theoretical models helping the data interpretation. We also present application to currently investigated materials.

  15. Gigantism

    Science.gov (United States)

    ... suppression test Prolactin Insulin-like growth factor-I Testosterone (boys) Thyroid hormone Imaging tests, such as CT ... Wisse, MD, Associate Professor of Medicine, Division of Metabolism, Endocrinology & Nutrition, University of Washington School of Medicine, ...

  16. Luminescent materials: probing the excited state of emission centers by spectroscopic methods

    Czech Academy of Sciences Publication Activity Database

    Mihóková, Eva; Nikl, Martin

    2015-01-01

    Roč. 26, č. 1 (2015), s. 1-17 ISSN 0957-0233 R&D Projects: GA ČR GA13-09876S Grant - others:AVČR(CZ) M100101212 Institutional support: RVO:68378271 Keywords : luminescence * rare- earth ions * ionization * tunneling * scintillators Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.492, year: 2015

  17. Controlling intermolecular aurophilicity in emissive dinuclear Au(I) materials and their luminescent response to ammonia vapour.

    Science.gov (United States)

    Roberts, Ryan J; Le, Debbie; Leznoff, Daniel B

    2015-10-01

    The concept that hydrogen bonding cations can reduce the coulombic repulsion inherent to anionic gold species and thereby trigger aurophilicity is realized with three new photoluminescent compounds of the form [Q]2[Au2(i-mnt)2] (i-mnt = (CN)2C[double bond, length as m-dash]CS2(2-), Q = 3,5-dimethylpyrazolium, piperidinium). These compounds illustrate unprecedented supramolecular aurophilicity between the anions, the emission of which is significantly red-shifted compared to zero-dimensional analogues, a direct result of the aurophilic network. The piperidinium salt exhibits a vapochromic/luminescent response to ammonia, inducing a change in colour of the reflectance and emission from red to yellow. These results demonstrate the ability to rationally control the formation of supramolecular metallophilic networks via the incorporation of hydrogen bonding cations.

  18. Luminescent sensitization and blue shift emission of Ir(ppy){sub 2}(VPHD) by copolymerization with MMA

    Energy Technology Data Exchange (ETDEWEB)

    An Baoli, E-mail: blan@staff.shu.edu.cn [Department of Chemistry, College of Science, Shanghai University, Shanghai 200444 (China); Dai Fanzeng; Zhang Yanling; Song Jian; Huang, Xiao-Di [Department of Chemistry, College of Science, Shanghai University, Shanghai 200444 (China); Xu, Jia-Qiang, E-mail: xujiaqiang@shu.edu.cn [Department of Chemistry, College of Science, Shanghai University, Shanghai 200444 (China); State Key Laboratory of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China)

    2011-08-15

    Ir(ppy){sub 2}(VPHD) (ppy=2-phenyl pyridine, VPHD=6-(4-vinylphenyl)-2,4-hexanedione) was copolymerized with methyl methacrylate (MMA). The copolymer had high quantum yield of 52.3{+-}0.5% in dilute ethyl acetate solution, and the yield increased around 45% than that of the iridium monomer. The maximum emission peaks for the copolymers shifted from 515 to 489 nm while the iridium complex content was less than 0.005 mol% in the feed. The blue emission at 489 nm and the green emission at 520 nm were analyzed by Lorenz function. They are attributed to {sup 1}MLCT and {sup 3}MLCT emissions, respectively. - Highlights: > PMMA-Ir(ppy){sub 2}(VPHD) as luminescent material with high yield of 53%. > The blue color emission at 489 nm from {sup 1}MLCT in conformity with Lorenz function. > The quantum yield for the copolymer increases 45% than that of the iridium monomer. > The {sup 3}MLCT Ex. intensity versus the monomer concentration is in conformity with Boltzmann function.

  19. The red, white and blue of quartz luminescence: A comparison of D{sub e} values derived for sediments from Australia and Indonesia using thermoluminescence and optically stimulated luminescence emissions

    Energy Technology Data Exchange (ETDEWEB)

    Westaway, K.E. [Department of Environment and Geography, Faculty of Science, Macquarie University, NSW 2109 (Australia)], E-mail: kira@els.mq.edu.au

    2009-05-15

    Heated quartz, including quartz from volcanic provinces, commonly displays different luminescence characteristics compared with the same mineral in non-volcanic contexts. These differing properties demand thorough investigations into the most suitable dating techniques for samples composed of quartz grains with different origins. In cave settings, independent techniques such as radiocarbon and U-series can prove useful for validating results, but further insights may be gained by comparing the results obtained for quartz using different luminescence emissions. Twenty-two quartz samples have been selected from five areas (Australia, Timor, Flores, Java and Sulawesi) for comparison of the red and blue emissions. The dual-aliquot regenerative-dose protocol was used to estimate the equivalent dose (D{sub e}) associated with the light-sensitive red thermoluminescence while the single aliquot regenerative-dose protocol was used to measure the D{sub e} values for single grains and single aliquots, which were optically stimulated by green or blue light, respectively. The results obtained from the red thermoluminescence and optically stimulated luminescence measurements display good agreement with independent dating techniques (within {approx}20%). However, the blue emissions exhibit a thermally unstable component, which causes a large underestimation in palaeodoses (on average {approx}80%) and an age limit of {approx}25 ka, while the red emissions are more thermally stable over geological timescales but produce an overestimation in red TL ages (by {approx}13 ka) and low precision (typically {approx}24%). These results can be correlated to three different quartz groups, which have been divided according to their luminescence emissions.

  20. Pituitary Gigantism: A Case Report

    Directory of Open Access Journals (Sweden)

    Rana Bhattacharjee

    2012-01-01

    Full Text Available Objective: To present a rare case of gigantism. Case Report: A 25-year-old lady presented with increased statural growth and enlarged body parts noticed since the age of 14 years, primary amenorrhea, and frontal headache for the last 2 years.She has also been suffering from non-inflammatory low back pain with progressive kyphosis and pain in the knees, ankles, and elbows for the last 5 years. There was no history of visual disturbance, vomiting, galactorrhoea, cold intolerance. She had no siblings. Family history was non-contributory.Blood pressure was normal. Height 221 cm, weight 138 kg,body mass index (BMI28. There was coarsening of facial features along with frontal bossing and prognathism, large hands and feet, and small goitre. Patient had severe kyphosis and osteoarthritis of knees. Confrontation perimetry suggested bitemporal hemianopia. Breast and pubic hair were of Tanner stage 1. Serum insulin like growth factor-1 (IGF1 was 703 ng/ml with all glucose suppressedgrowth hormone (GHvalues of >40 ng/ml. Prolactin was 174 ng/ml. Basal serum Lutenising Hormone (LH, follicle stimulating Hormone (FSH was low. Oral glucose tolerance test (OGTT, liver and renal function tests, basal cortisol and thyroid profile, Calcium, phosphorus and Intact Parathyroid hormone (iPTH were normal.Computed tomographyscan of brain showed large pituitary macroadenoma. Automated perimetry confirmed bitemporal hemianopia. A diagnosis of gigantism due to GH secreting pituitary macroadenoma with hypogonadotrophichypogonadism was made. Debulking pituitary surgery followed by somatostatin analogue therapy with gonadal steroid replacement had been planned, but the patient refused further treatment.

  1. Mixoma gigante de átrio esquerdo

    OpenAIRE

    Muñoz Cruz,Juan Francisco; Dias,Leniel Bairral; Rodrigues Neto,João Osório; Oliveira,Sérgio Almeida de

    1998-01-01

    Homem de 65 anos, portador de miocardiopatia dilatada e hipertensão arterial de longa data, com antecedentes de acidente vascular cerebral e que, ao ecocardiograma, apresentou mixoma gigante de átrio esquerdo.

  2. Luminescence property and emission enhancement of YbAlO3:Mn4+ red phosphor by Mg2+ or Li+ ions

    Science.gov (United States)

    Cao, Renping; Luo, Wenjie; Xu, Haidong; Luo, Zhiyang; Hu, Qianglin; Fu, Ting; Peng, Dedong

    2016-03-01

    YbAlO3:Mn4+, YbAlO3:Mn4+, Li+, and YbAlO3:Mn4+, Mg2+ phosphors are synthesized by high temperature solid-state reaction method in air. Their crystal structures and luminescence properties are investigated. Photoluminescence excitation (PLE) spectrum monitored at 677 nm contains broad PLE band with three PLE peaks located at ∼318, 395, and 470 nm within the range 220-600 nm. Emission spectra with excitation 318 and 470 nm exhibit three emission band peaks located at ∼645, 677, and 700 nm in the range of 610-800 nm and their corresponding chromaticity coordinates are about (x = 0.6942, y = 0.3057). The possible luminous mechanism of Mn4+ ion is analyzed by the simple energy level diagram of Mn4+ ion. The optimum Mn4+-doped concentration in YbAlO3:Mn4+ phosphor is about 0.4 mol% and the luminescence lifetime of YbAlO3:0.4%Mn4+ phosphor is ∼0.59 ms. Emission intensity of YbAlO3:0.4%Mn4+ phosphor can be enhanced ∼6 times after Mg2+ ion is co-doped and it is ∼2 times when Li+ ion is co-doped. The content in the paper is useful to research new Mn4+-doped luminescence materials and improve luminescence property of other Mn4+-doped phosphors.

  3. Stable luminescent metal-organic frameworks as dual-functional materials to encapsulate ln(3+) ions for white-light emission and to detect nitroaromatic explosives.

    Science.gov (United States)

    Xie, Wei; Zhang, Shu-Ran; Du, Dong-Ying; Qin, Jun-Sheng; Bao, Shao-Juan; Li, Jing; Su, Zhong-Min; He, Wen-Wen; Fu, Qiang; Lan, Ya-Qian

    2015-04-06

    A stable porous carbazole-based luminescent metal-organic framework, NENU-522, was successfully constructed. It is extremely stable in air and acidic/basic aqueous solutions, which provides the strategy for luminescent material encapsulation of Ln(3+) ions with tunable luminescence for application in light emission. More importantly, Ln(3+)@NENU-522 can emit white light by encapsulating different molar ratios of Eu(3+) and Tb(3+) ions. Additionally, Tb(3+)@NENU-522 is found to be useful as a fluorescent indicator for the qualitative and quantitative detection of nitroaromatic explosives with different numbers of -NO2 groups, and the concentrations of complete quenching are about 2000, 1000, and 80 ppm for nitrobenzene, 1,3-dinitrobenzene, and 2,4,6-trinitrophenol, respectively. Meanwhile, Tb(3+)@NENU-522 displays high selectivity and recyclability in the detection of nitroaromatic explosives.

  4. Luminescence Instrumentation

    DEFF Research Database (Denmark)

    Jain, Mayank; Bøtter-Jensen, Lars

    2014-01-01

    This chapter gives an introduction to instrumentation for stimulated luminescence studies, with special focus on luminescence dating using the natural dosimeters, quartz and feldspars. The chapter covers basic concepts in luminescence detection, and thermal and optical stimulation, and reference...

  5. Redox-Triggered Bonding-Induced Emission of Thiol-Functionalized Gold Nanoclusters for Luminescence Turn-On Detection of Molecular Oxygen.

    Science.gov (United States)

    Ao, Hang; Feng, Hui; Zhao, Mengting; Zhao, Meizhi; Chen, Jianrong; Qian, Zhaosheng

    2017-11-22

    Most optical sensors for molecular oxygen were developed based on the quenching effect of the luminescence of oxygen-sensitive probes; however, the signal turn-off mode of these probes is undesirable to quantify and visualize molecular oxygen. Herein, we report a novel luminescence turn-on detection strategy for molecular oxygen via the specific oxygen-triggered bonding-induced emission of thiol-functionalized gold nanoclusters. Thiol-functionalized gold nanoclusters were prepared by a facile one-step synthesis, and as-prepared gold nanoclusters possess significant aggregation-induced emission (AIE) property. It is the first time to discover the oxygen-triggered bonding-induced emission (BIE) behavior of gold nanoclusters, which results in disulfide-linked covalent bonding assemblies with intensely red luminescence. This specific redox-triggered BIE is capable of quantitatively detecting dissolved oxygen in aqueous solution in a light-up manner, and trace amount of dissolved oxygen at ppb level is achieved based on this detection method. A facile and convenient test strip for oxygen detection was also developed to monitor molecular oxygen in a gas matrix. Covalent bonding-induced emission is proven to be a more efficient way to attain high brightness of AIEgens than a physical aggregation-induced emission process, and provides a more convenient and desirable detection method for molecular oxygen than the previous sensors.

  6. Optically stimulated luminescence emission spectra from feldspars as a function of sample temperature

    DEFF Research Database (Denmark)

    Duller, G.A.T.; Bøtter-Jensen, L.

    1997-01-01

    samples have been measured at various sample temperatures. A small but consistent shift of the peak emission wavelength to shorter wavelengths at higher temperatures is observed. However, the magnitude of this shift is sufficiently small that it will not affect measurements of the thermal activation...... energy. A systematic difference is observed between the thermal activation energies measured when using different emission wavelengths. In particular, the thermal activation energy of the emission at 400 nm is typically 0.11 eV, while that at 570 nm from the same samples is 0.03-0.05 eV. Several possible...

  7. Luminescence emission spectra of several Al2O3 TL materials

    International Nuclear Information System (INIS)

    Petoe, A.

    1996-01-01

    The paper reports on the radioluminescence (RL) and the thermoluminescence (TL) emission characteristics of several aluminium-oxide dosimeter materials: 'pure' a-Al 2 O 3 (corundum), Al 2 O 3 :C (TLK-500), Al 2 O 3 :Si, Ti, and Al 2 O 3 :Mg, Y. The general feature of the RL spectra is a strong emission line at 695 nm caused by the Cr 3+ impurity, and a wide UV band around 310 nm, which is related to F + -centres. A further emission appears around 420 nm in all of the 'doped' materials. However, the origin of this band is not the same an all phosphors: in Al 2 O 3 :Si, Ti it is associated with Ti 3+ , while in the other two samples it is more likely to be due to F-centres. Al 2 O 3 :Mg, Y shows several more emission lines between 450 and 600 nm, which increase with increasing dopant concentration and therefore these are attributed to Y 3+ impurity. The most obvious feature of the TL emission spectra is the lack of the 310 nm band. Apart from this, all the other emission bands found in the RL are clearly identifiable, and show the same intensity ratios. Corundum shows three major TL peaks at 90, 180 and 350 o C, all of them featuring the Cr 3+ emission. The two glow peaks of Al 2 O 3 :Si, Ti at 120 and 270 o C exhibit the same emission spectra: a strong Cr 3+ line and a somewhat weaker band around 410-420 nm. It is remarkable, that in Al 2 O 3 :C and in Al 2 O 3 :Mg, Y the different glow peaks have different emission spectra. In Al 2 O 3 :C the low temperature, 120 o C peak emits the Cr 3+ line, while the main dosimetry peak at 180 o C exhibits only the 410-420 nm band. On the other hand, in Al 2 O 3 :Mg, Y this blue band appears only in a separated glow peak around 270 o C, while the other three glow peaks at 120, 180 and 350 o C show the Cr 3+ and Y 3+ related emission lines. The detailed knowledge of the RL and TL emission spectra of different Al 2 O 3 TL dosimeters can be used to improve the performance of routine dosimetry work. (author)

  8. Luminescence properties of red-emission Mg4 Nb2 O9:Eu3+ phosphor.

    Science.gov (United States)

    Cao, Renping; Cao, Chunyan; Yu, Xiaoguang; Qiu, Jianrong

    2015-03-01

    Red-emitting Mg4 Nb2 O9 :Eu(3+) phosphor is synthesized via a solid-state reaction method in air, and its crystal structure and luminescence are investigated. The phosphor can be excited efficiently by ~ 395 nm light, coupled well with a ~ 395 nm near-ultraviolet chip and emits red light at ~ 613 nm with sharp spectra due to (5) D0  → (7)  F2 transition of the Eu(3+) ion. Mg4 Nb2 O9 :Eu(3+) phosphor sintered at 1350 ºC shows Commission international de I'Eclairage (CIE) chromaticity coordinates of x = 0.6354, y = 0.3592, and is a potential red-emitting phosphor candidate for white light-emitting diodes (W-LEDs) under ~ 395 nm near-ultraviolet LED chip excitation. Copyright © 2014 John Wiley & Sons, Ltd.

  9. Method of measuring luminescence of a material

    Science.gov (United States)

    Miller, Steven D.

    2015-12-15

    A method of measuring luminescence of a material is disclosed. The method includes applying a light source to excite an exposed material. The method also includes amplifying an emission signal of the material. The method further includes measuring a luminescent emission at a fixed time window of about 10 picoseconds to about 10 nanoseconds. The luminescence may be radio photoluminescence (RPL) or optically stimulated luminescence (OSL).

  10. Radiation luminescence of polymers - emission behaviour of aromatic compounds incorporated in synthetic rubbers

    International Nuclear Information System (INIS)

    Kawanishi, Shunichi; Hagiwara, Miyuki

    1986-01-01

    For a deep understanding of a radiation protection mechanism of some aromatic compounds on synthetic polymers, their optical emission behavior under electron irradiation was studied. The fluorescence light was led out of an irradiation room through a wave guide and detected by a photomultiplier so that less noisy spectrum was obtained. Acenaphthene or acenaphthylene was added to the synthetic rubbers such as ethylene propylene diene terpolymer, styrene butadiene rubber and cis-1,4-polybutadiene. The intensities of optical emission induced by electron beams changed from polymer to polymer, while those by ultraviolet lights were independent of the kind of polymers. The dependence of emission intensity on polymers under electron irradiation was estimated to show the fact that the radiation excited energy transfers occur from the polymer matrix to the additives and that an efficiency of the energy transfer is dependent on kinds of polymers. (author)

  11. Sensitisation of visible and NIR lanthanide emission by InPZnS quantum dots in bi-luminescent hybrids

    NARCIS (Netherlands)

    Molloy, Jennifer K.; Lincheneau, Christophe; Karimdjy, Maria Moula; Agnese, Fabio; Mattera, Lucia; Gateau, Christelle; Reiss, Peter; Imbert, Daniel; Mazzanti, Marinella

    2016-01-01

    The synthesis of stable hybrid nanoparticles combining InPZnS@ZnSe/ZnS quantum dots (QDs) and grafted lanthanide complexes has been performed using two different approaches in organic and aqueous media. The final bi-luminescent hybrids exhibit Ln(III) (Ln = Eu and Yb) centred luminescence upon QD

  12. A highly emissive inorganic hexamolybdenum cluster complex as a handy precursor for the preparation of new luminescent materials.

    Science.gov (United States)

    Efremova, O A; Shestopalov, M A; Chirtsova, N A; Smolentsev, A I; Mironov, Y V; Kitamura, N; Brylev, K A; Sutherland, A J

    2014-04-28

    The synthesis and characterisation of a new, highly luminescent inorganic cluster complex, (Bu4N)2[Mo6I8(NO3)6], are described. The complex possesses labile nitrato ligands and is therefore a useful precursor for the design of new luminescent materials. To exemplify this, functionalised polystyrene beads have been utilised as "polymeric ligands" to immobilise the molybdenum cluster complex.

  13. Luminescence of neutron irradiated amorphous SiO2. The 1.9 and 2.2 eV emission bands

    International Nuclear Information System (INIS)

    Mervic, A.; Guzzi, M.; Lucchini, G.; Spinolo, G.

    1992-01-01

    Experimental results on the 1.9 and 2.2 eV luminescence bands in neutron irradiated amorphous silica are reported. All the four types in which silicas are usually classified (natural and synthetic, both dry and wet) are considered. Photoluminescence spectra in the 80 to 650 K temperature range, photoluminescence excitation spectra at 80 and 300 K, and spectrally resolved thermally stimulated luminescence are measured. The comparison of the intensity of the 1.9 eV band in the different types of silicas allows us to support one of the models recently proposed for the structure of the emitting center. A first systematic description of the main properties of the 2.2 eV emission band is given. (orig.)

  14. Hydrothermal synthesis, crystal structure and luminescence property ...

    Indian Academy of Sciences (India)

    3.4 Luminescence properties of 1. The solid state luminescence property of 1 along with free ligand was investigated at room temperature. On photoexcitation at 365 nm, a characteristic peak at. 583 nm was observed in the emission spectrum of. 1 (figure 6). The yellow luminescence observed at. 583 nm is possibly due to ...

  15. How far are luminescence properties predictable?

    NARCIS (Netherlands)

    Blasse, G.

    Our knowledge of the luminescence of isolators has increased considerably during the past decade. As a consequence it has become possible to understand the luminescence of technically important phosphors and even to predict efficient luminescent materials. We first illustrate how emission spectra of

  16. Evolution of Gigantism in Amphiumid Salamanders

    Science.gov (United States)

    Bonett, Ronald M.; Chippindale, Paul T.; Moler, Paul E.; Van Devender, R. Wayne; Wake, David B.

    2009-01-01

    The Amphiumidae contains three species of elongate, permanently aquatic salamanders with four diminutive limbs that append one, two, or three toes. Two of the species, Amphiuma means and A. tridactylum, are among the largest salamanders in the world, reaching lengths of more than one meter, whereas the third species (A. pholeter), extinct amphiumids, and closely related salamander families are relatively small. Amphiuma means and A. tridactylum are widespread species and live in a wide range of lowland aquatic habitats on the Coastal Plain of the southeastern United States, whereas A. pholeter is restricted to very specialized organic muck habitats and is syntopic with A. means. Here we present analyses of sequences of mitochondrial and nuclear loci from across the distribution of the three taxa to assess lineage diversity, relationships, and relative timing of divergence in amphiumid salamanders. In addition we analyze the evolution of gigantism in the clade. Our analyses indicate three lineages that have diverged since the late Miocene, that correspond to the three currently recognized species, but the two gigantic species are not each other's closest relatives. Given that the most closely related salamander families and fossil amphiumids from the Upper Cretaceous and Paleocene are relatively small, our results suggest at least two extreme changes in body size within the Amphuimidae. Gigantic body size either evolved once as the ancestral condition of modern amphiumas, with a subsequent strong size reduction in A. pholeter, or gigantism independently evolved twice in the modern species, A. means and A. tridactylum. These patterns are concordant with differences in habitat breadth and range size among lineages, and have implications for reproductive isolation and diversification of amphiumid salamanders. PMID:19461997

  17. Evolution of gigantism in amphiumid salamanders.

    Directory of Open Access Journals (Sweden)

    Ronald M Bonett

    2009-05-01

    Full Text Available The Amphiumidae contains three species of elongate, permanently aquatic salamanders with four diminutive limbs that append one, two, or three toes. Two of the species, Amphiuma means and A. tridactylum, are among the largest salamanders in the world, reaching lengths of more than one meter, whereas the third species (A. pholeter, extinct amphiumids, and closely related salamander families are relatively small. Amphiuma means and A. tridactylum are widespread species and live in a wide range of lowland aquatic habitats on the Coastal Plain of the southeastern United States, whereas A. pholeter is restricted to very specialized organic muck habitats and is syntopic with A. means. Here we present analyses of sequences of mitochondrial and nuclear loci from across the distribution of the three taxa to assess lineage diversity, relationships, and relative timing of divergence in amphiumid salamanders. In addition we analyze the evolution of gigantism in the clade. Our analyses indicate three lineages that have diverged since the late Miocene, that correspond to the three currently recognized species, but the two gigantic species are not each other's closest relatives. Given that the most closely related salamander families and fossil amphiumids from the Upper Cretaceous and Paleocene are relatively small, our results suggest at least two extreme changes in body size within the Amphuimidae. Gigantic body size either evolved once as the ancestral condition of modern amphiumas, with a subsequent strong size reduction in A. pholeter, or gigantism independently evolved twice in the modern species, A. means and A. tridactylum. These patterns are concordant with differences in habitat breadth and range size among lineages, and have implications for reproductive isolation and diversification of amphiumid salamanders.

  18. Gigantic Suprapubic Lymphedema: A Case Study

    Directory of Open Access Journals (Sweden)

    Roozbeh Tanhaeivash

    2016-08-01

    Full Text Available We present the first case study of idiopathic gigantic suprapubic lymphedema and buried penis treated with puboscrotal reconstruction in a patient with initial extreme obesity after an extensive weight reduction (120 kg. Massive localized lymphedema of the suprapubic region should be differentiated from the scrotal type. Severe lymphedema could not resolve on its own and weight reduction does not seem to be helpful in such cases.

  19. Giant basal cell carcinoma Carcinoma basocelular gigante

    Directory of Open Access Journals (Sweden)

    Nilton Nasser

    2012-06-01

    Full Text Available The basal cell carcinoma is the most common skin cancer but the giant vegetating basal cell carcinoma reaches less than 0.5 % of all basal cell carcinoma types. The Giant BCC, defined as a lesion with more than 5 cm at its largest diameter, is a rare form of BCC and commonly occurs on the trunk. This patient, male, 42 years old presents a Giant Basal Cell Carcinoma which reaches 180 cm2 on the right shoulder and was negligent in looking for treatment. Surgical treatment was performed and no signs of dissemination or local recurrence have been detected after follow up of five years.O carcinoma basocelular é o tipo mais comum de câncer de pele, mas o carcinoma basocelular gigante vegetante não atinge 0,5% de todos os tipos de carcinomas basocelulares. O Carcinoma Basocelular Gigante, definido como lesão maior que 5 cm no maior diâmetro, é uma forma rara de carcinoma basocelular e comumente ocorre no tronco. Este paciente apresenta um Carcinoma Basocelular Gigante com 180cm² no ombro direito e foi negligente em procurar tratamento. Foi realizado tratamento cirúrgico e nenhum sinal de disseminação ou recorrência local foi detectada após 5 anos.

  20. Intervalence charge transfer luminescence: Interplay between anomalous and 5d − 4f emissions in Yb-doped fluorite-type crystals

    Energy Technology Data Exchange (ETDEWEB)

    Barandiarán, Zoila, E-mail: zoila.barandiaran@uam.es; Seijo, Luis [Departamento de Química, Universidad Autónoma de Madrid, 28049 Madrid (Spain); Instituto Universitario de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, 28049 Madrid (Spain)

    2014-12-21

    In this paper, we report the existence of intervalence charge transfer (IVCT) luminescence in Yb-doped fluorite-type crystals associated with Yb{sup 2+}–Yb{sup 3+} mixed valence pairs. By means of embedded cluster, wave function theory ab initio calculations, we show that the widely studied, very broad band, anomalous emission of Yb{sup 2+}-doped CaF{sub 2} and SrF{sub 2}, usually associated with impurity-trapped excitons, is, rather, an IVCT luminescence associated with Yb{sup 2+}–Yb{sup 3+} mixed valence pairs. The IVCT luminescence is very efficiently excited by a two-photon upconversion mechanism where each photon provokes the same strong 4f{sup 14}–1A{sub 1g}→ 4f{sup 13}({sup 2}F{sub 7/2})5de{sub g}–1T{sub 1u} absorption in the Yb{sup 2+} part of the pair: the first one, from the pair ground state; the second one, from an excited state of the pair whose Yb{sup 3+} moiety is in the higher 4f{sup 13}({sup 2}F{sub 5/2}) multiplet. The Yb{sup 2+}–Yb{sup 3+} → Yb{sup 3+}–Yb{sup 2+} IVCT emission consists of an Yb{sup 2+} 5de{sub g} → Yb{sup 3+} 4f{sub 7/2} charge transfer accompanied by a 4f{sub 7/2} → 4f{sub 5/2} deexcitation within the Yb{sup 2+} 4f{sup 13} subshell: [{sup 2}F{sub 5/2}5de{sub g},{sup 2}F{sub 7/2}] → [{sup 2}F{sub 7/2},4f{sup 14}]. The IVCT vertical transition leaves the oxidized and reduced moieties of the pair after electron transfer very far from their equilibrium structures; this explains the unexpectedly large band width of the emission band and its low peak energy, because the large reorganization energies are subtracted from the normal emission. The IVCT energy diagrams resulting from the quantum mechanical calculations explain the different luminescent properties of Yb-doped CaF{sub 2}, SrF{sub 2}, BaF{sub 2}, and SrCl{sub 2}: the presence of IVCT luminescence in Yb-doped CaF{sub 2} and SrF{sub 2}; its coexistence with regular 5d-4f emission in SrF{sub 2}; its absence in BaF{sub 2} and SrCl{sub 2}; the quenching of

  1. Increasing fluorescent concentrator light collection efficiency by restricting the angular emission characteristic of the incorporated luminescent material: the 'Nano-Fluko' concept

    Science.gov (United States)

    Goldschmidt, J. C.; Peters, M.; Gutmann, J.; Steidl, L.; Zentel, R.; Bläsi, B.; Hermle, M.

    2010-05-01

    Fluorescent concentrators concentrate both diffuse and direct radiation without requiring tracking of the sun. In fluorescent concentrators, luminescent materials embedded in a transparent matrix absorb sunlight and emit radiation with a different wavelength. Total internal reflection traps the emitted light and guides it to solar cells attached to the concentrator's edges. The escape cone of total internal reflection, however, limits the light collection efficiency. Spectrally selective photonic structures, which transmit light in the absorption range of the luminescent material and reflect the emitted light, reduce these losses. In this paper, we review different realizations of such structures and show that they increase collection efficiency by 20%. However, light emitted into steep angles in respect to the front surface, which would be lost without the photonic structures, has a very long effective path inside the concentrator until it reaches a solar cell. Therefore it suffers from path length dependent losses. We discuss how emission into the unfavorable directions can be suppressed by integrating the luminescent material into photonic structures, thus reducing these losses. We present possible realizations both for the concentrator design and for the solar cells used in such systems.

  2. An aggregation-induced emissive NIR luminescent based on ESIPT and TICT mechanisms and its application to the detection of Cys

    Science.gov (United States)

    Li, Renjie; Yan, Liqiang; Wang, Zhongwei; Qi, Zhengjian

    2017-05-01

    A series of red to near-infrared (NIR) emissive organic compound 1-3 based on the 2‧-hydroxyacetophenone derivatives were synthesized through a mild condensation reaction, which exhibit typical AIE properties and long fluorescence lifetime in an aggregated state. Compound 2 displays the highest quantum yield (Φf) of 0.49 among the reported organic compound with an emission maximum (λem) 700 nm. Comparison between the bright emissive compound 2 and the weak fluorescence compounds 1 and 3 clearly gives evidence that a subtle structure modification can arouse great property changes, which is instructive in designing new high-efficiency organic luminescent materials. In demonstration of the potential application of these new fluorescence dyes, Probe 4 that is capable of unique detecting Cys in water media is also reported.

  3. White light emission from radical carbonyl-terminations in Al2O3-SiO2 porous glasses with high luminescence quantum efficiencies

    International Nuclear Information System (INIS)

    Hayakawa, Tomokatsu; Hiramitsu, Ai; Nogami, Masayuki

    2003-01-01

    Development of white phosphors with highly emissive, stable, and less toxic characteristics has been important for display and lighting technology. In this letter, it is shown that sol-gel-derived glasses of aluminosilicate composition, followed by a heat treatment in air at low temperatures around 500 deg. C, exhibit two intense, visible photoluminescence bands: One is due to point defects in these glasses and the other comes from radical carbonyl-terminations on the surface of pores. The photoluminescence provides a white light with high luminescence quantum efficiency (∼66.5%) under long-wavelength ultraviolet excitation

  4. Luminescence nanothermometry

    Science.gov (United States)

    Jaque, Daniel; Vetrone, Fiorenzo

    2012-07-01

    The current status of luminescence nanothermometry is reviewed in detail. Based on the main parameters of luminescence including intensity, bandwidth, bandshape, polarization, spectral shift and lifetime, we initially describe and compare the different classes of luminescence nanothermometry. Subsequently, the various luminescent materials used in each case are discussed and the mechanisms at the root of the luminescence thermal sensitivity are described. The most important results obtained in each case are summarized and the advantages and disadvantages of these approaches are discussed.The current status of luminescence nanothermometry is reviewed in detail. Based on the main parameters of luminescence including intensity, bandwidth, bandshape, polarization, spectral shift and lifetime, we initially describe and compare the different classes of luminescence nanothermometry. Subsequently, the various luminescent materials used in each case are discussed and the mechanisms at the root of the luminescence thermal sensitivity are described. The most important results obtained in each case are summarized and the advantages and disadvantages of these approaches are discussed. This work was supported by the Universidad Autónoma de Madrid and Comunidad Autónoma de Madrid (Project S2009/MAT-1756), by the Spanish Ministerio de Educacion y Ciencia (MAT2010-16161) and by Caja Madrid Foundation.

  5. Tuneable luminescence properties of EDTA-assisted ZnS:Mn nanocrystals from a yellow-orange to a red emission band.

    Science.gov (United States)

    Viswanath, R; Bhojya Naik, H S; Arun Kumar, G; Suresh Gowda, I K; Yallappa, S

    2017-11-01

    Luminescence technology has been improved with the help of semiconductor nanoparticles that possess novel optical and electrical properties compared with their bulk counterpart. The aim of this study was to design semiconductor nanocrystals in their pure (ZnS) or doped form (ZnS:Mn) with different concentrations of Mn 2+ ions by a wet chemical route stabilized by ethylenediamine tetra-acetic acid (EDTA) and to evaluate their luminescence properties. The nanocrystals were characterized by physicochemical techniques such as X-ray diffraction (XRD), High-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), EDS, and ultraviolet (UV)-visible light and photoluminescence (PL) studies. These results showed the presence of cubic phase and spherically shaped nanocrystals. A blue shift with respect to their bulk counterpart was observed. PL emission spectra were observed with a fixed blue peak and the yellow-orange bands were red shifted towards the red region under the same excitation wavelength. The orange-red bands were attributed to the radiation transition of electrons in 3d5 unfilled shells of Mn 2+ ions [ 4 T 1 ( 4 G)- 6 A 1 ( 6 S)]; the ZnS matrix varied with Mn 2+ concentration. Shift and increase in the intensity of the PL and absorption bands were observed with increase in Mn content. The study showed that Mn 2+ -doped ZnS nanocrystal emission bands can be tuned from the yellow-orange to the red regions under a controlled synthesis process and could be used as promising luminescent emitters in the biology field upon functionalization with suitable materials. Further studies on construction with various other materials will be useful for practical applications. Copyright © 2017 John Wiley & Sons, Ltd.

  6. Fungal cell gigantism during mammalian infection.

    Directory of Open Access Journals (Sweden)

    Oscar Zaragoza

    2010-06-01

    Full Text Available The interaction between fungal pathogens with the host frequently results in morphological changes, such as hyphae formation. The encapsulated pathogenic fungus Cryptococcus neoformans is not considered a dimorphic fungus, and is predominantly found in host tissues as round yeast cells. However, there is a specific morphological change associated with cryptococcal infection that involves an increase in capsule volume. We now report another morphological change whereby gigantic cells are formed in tissue. The paper reports the phenotypic characterization of giant cells isolated from infected mice and the cellular changes associated with giant cell formation. C. neoformans infection in mice resulted in the appearance of giant cells with cell bodies up to 30 microm in diameter and capsules resistant to stripping with gamma-radiation and organic solvents. The proportion of giant cells ranged from 10 to 80% of the total lung fungal burden, depending on infection time, individual mice, and correlated with the type of immune response. When placed on agar, giant cells budded to produce small daughter cells that traversed the capsule of the mother cell at the speed of 20-50 m/h. Giant cells with dimensions that approximated those in vivo were observed in vitro after prolonged culture in minimal media, and were the oldest in the culture, suggesting that giant cell formation is an aging-dependent phenomenon. Giant cells recovered from mice displayed polyploidy, suggesting a mechanism by which gigantism results from cell cycle progression without cell fission. Giant cell formation was dependent on cAMP, but not on Ras1. Real-time imaging showed that giant cells were engaged, but not engulfed by phagocytic cells. We describe a remarkable new strategy for C. neoformans to evade the immune response by enlarging cell size, and suggest that gigantism results from replication without fission, a phenomenon that may also occur with other fungal pathogens.

  7. Sotos syndrome: An interesting disorder with gigantism

    Directory of Open Access Journals (Sweden)

    Nalini A

    2008-01-01

    Full Text Available We report the case of a 16-year-old boy diagnosed to have Sotos syndrome, with rare association of bilateral primary optic atrophy and epilepsy. He presented with accelerated linear growth, facial gestalt, distinctive facial features, seizures and progressive diminution of vision in both eyes. He had features of gigantism from early childhood. An MRI showed that brain and endocrine functions were normal. This case is of interest, as we have to be aware of this not so rare disorder. In addition to the classic features, there were two unusual associations with Sotos syndrome in the patient.

  8. BG2003 luminescent spectrograph

    International Nuclear Information System (INIS)

    Li Huhou

    2004-01-01

    A new equipment for luminescent spectrograph has been created. The prototype is named BG2003. It is qualified for running. Dating with selected frequency optical luminescence means that the wavelength of the stimulating source and the emission photons can be selected. Then, one can use this equipment to do the separation of the minerals in the fine grains sample for the fine grains dating technique. And also it may be effective to resolve many problems for the minerals authentication. A new optical separate technique will be created and developed in mineralogy. (authors)

  9. Quiste gigante retroperitoneal. Informe de 3 casos

    Directory of Open Access Journals (Sweden)

    J.M. López López

    2014-07-01

    Full Text Available El quiste retroperitoneal gigante es una entidad poco frecuente que suele confundirse con el quiste mesentérico; sin embargo, su origen mesotelial y retroperitoneal lo hace diferente, ya que no emerge del mesenterio. Los quistes mesoteliales se reportan de pequeño tamaño y generalmente asociados a patología anexial. En este escrito se describen 3 casos de pacientes femeninas que coincidentemente presentaron sintomatología muy semejante por el crecimiento desmesurado de los quistes, aproximadamente 30 cm de diámetro. Para descartar patología maligna se monitorizaron los marcadores tumorales. Se realizó cirugía abierta hacia el espacio retroperitoneal, extrayéndolos íntegros. La evolución fue buena, sin recurrencia hasta 3 años de seguimiento. En quistes gigantes retroperitoneales se recomienda la cirugía abierta para la extracción íntegra del quiste y evitar la recurrencia, como se describe en la literatura revisada.

  10. Luminescence dating

    International Nuclear Information System (INIS)

    Rieser, U.

    2013-01-01

    The luminescence techniques have evolved over the last 40 years to a powerful dating instrument in archaeology and geoscience. Depending on how the luminescence is stimulated, one distinguishes the phenomena of thermoluminescence (TL), optically stimulated luminescence (OSL) and infrared stimulated luminescence (IRSL). Each of these phenomena has its specific potential for dating various archaeological materials in the time range from medieval back to palaeolithic periods, or, speaking in geological terms, for dating of Holocene and late Pleistocene objects. The OSL and IRSL techniques are sometimes treated together as 'optical dating'. The luminescence techniques differ from other major dating techniques, such as 14 C, essentially by their applicability to inorganic materials, their wide age-range from about 100 years to more than 100,000 years and the kind of datable events which are the last exposure to heat or to light. (author). 10 refs., 3 figs.

  11. Luminescence dating

    International Nuclear Information System (INIS)

    Rieser, U.

    2009-01-01

    The luminescence techniques have evolved over the last 40 years to a powerful dating instrument in archaeology and geoscience. Depending on how the luminescence is stimulated, one distinguishes the phenomena of thermoluminescence (TL), optically stimulated luminescence (OSL) and infrared stimulated luminescence (IRSL). Each of these phenomena has its specific potential for dating various archaeological materals in the time range from medieval back to palaeolithic periods, or, speaking in geological terms, for dating of Holocene and late Pleistocene objects. The OSL and IRSL techniques are sometimes treated together as 'optical dating'. The luminescence techniques differ from other major dating techniques, such as 14 C, essentially by their applicability to inorganic materials, their wide age-range from about 100 years to more than 100,000 years and the kind of datable events which are the last exposure to heat or to light. (author). 10 refs., 3 figs.

  12. Luminescence dating

    International Nuclear Information System (INIS)

    Rieser, U.

    2012-01-01

    The luminescence techniques have evolved over the last 40 years to a powerful dating instrument in archaeology and geoscience. Depending on how the luminescence is stimulated, one distinguishes the phenomena of thermoluminescence (TL), optically stimulated luminescence (OSL) and infrared stimulated luminescence (IRSL). Each of these phenomena has its specific potential for dating various archaeological materials in the time range from medieval back to palaeolithic periods, or, speaking in geological terms, for dating of Holocene and late Pleistocene objects. The OSL and IRSL techniques are sometimes treated together as 'optical dating'. The luminescence techniques differ from other major dating techniques, such as 14 C, essentially by their applicability to inorganic materials, their wide age-range from about 100 years to more than 100,000 years and the kind of datable events which are the last exposure to heat or to light. (author). 10 refs., 3 figs.

  13. Luminescence from metals and insulators

    International Nuclear Information System (INIS)

    Crawford, O.H.

    1985-01-01

    The term luminescence is normally applied to light emission that is not explainable by the mechanisms discussed by the other speakers in this meeting. Specifically, it is not transition radiation, surface plasmon radiation, or bremsstrahlung. One normally thinks of luminescence as arising from one-electron transitions within a medium. This talk consists of an overview of luminescence from condensed matter under irradiation by either energetic particles or photons. The author begins with organic molecules, where luminescence is best understood, and then discusses inorganic insulators and metals. Finally, the dependence of yield upon projectile species and velocity is discussed, and predictions are made concerning the relative effectiveness of electrons, protons, and hydrogen atoms in exciting luminescence

  14. Boron clusters in luminescent materials.

    Science.gov (United States)

    Mukherjee, Sanjoy; Thilagar, Pakkirisamy

    2016-01-21

    In recent times, luminescent materials with tunable emission properties have found applications in almost all aspects of modern material sciences. Any discussion on the recent developments in luminescent materials would be incomplete if one does not account for the versatile photophysical features of boron containing compounds. Apart from triarylboranes and tetra-coordinate borate dyes, luminescent materials consisting of boron clusters have also found immense interest in recent times. Recent studies have unveiled the opportunities hidden within boranes, carboranes and metalloboranes, etc. as active constituents of luminescent materials. From simple illustrations of luminescence, to advanced applications in LASERs, OLEDs and bioimaging, etc., the unique features of such compounds and their promising versatility have already been established. In this review, recent revelations about the excellent photophysical properties of such materials are discussed.

  15. Sub-10 nm lanthanide doped BaLuF{sub 5} nanocrystals: Shape controllable synthesis, tunable multicolor emission and enhanced near-infrared upconversion luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Ling [School of Materials Science and Engineering, Key Laboratory of Low-dimensional Materials and Application Technology (Ministry of Education), Xiangtan University, Xiangtan 411105 (China); Lu, Wei [Department of Applied Physics and Materials Research Center, The Hong Kong Polytechnic University (Hong Kong); Wang, Haibo; Yi, Zhigao [School of Materials Science and Engineering, Key Laboratory of Low-dimensional Materials and Application Technology (Ministry of Education), Xiangtan University, Xiangtan 411105 (China); Zeng, Songjun, E-mail: songjunz@hunnu.edu.cn [College of Physics and Information Science and Key Laboratory of Low-dimensional Quantum Structures and Quantum Control of the Ministry of Education, Hunan Normal University, Changsha 410081 (China); Li, Zheng, E-mail: zhengli58@gmail.com [School of Materials Science and Engineering, Key Laboratory of Low-dimensional Materials and Application Technology (Ministry of Education), Xiangtan University, Xiangtan 411105 (China)

    2015-04-15

    Highlights: • Sub-10 nm cubic phase BaLuF{sub 5} nanocrystals were synthesized by a hydrothermal method for the first time. • Tunable multicolor from yellow to yellow-green was achieved by controlling Gd{sup 3+} content in BaLuF{sub 5}:Yb/Er system. • Intense near-infrared upconversion luminescence in BaLuF{sub 5}:Gd/Yb/Tm nanocrystal. • The enhancement near-infrared luminescence can be realized by adjusting the content of Gd{sup 3+} in BaLuF{sub 5}:Gd/Yb/Tm system. - Abstract: In this study, sub-10 nm BaLuF{sub 5} nanocrystals with cubic phase structure were synthesized by a solvothermal method using oleic acid as the stabilizing agent. The as-prepared BaLuF{sub 5} nanocrystals were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and analyzed by the upconversion (UC) spectra. The TEM results reveal that these samples present high uniformity. Compared with Gd-free samples, the size of BaLuF{sub 5}:Yb/Er doped with 10% Gd{sup 3+} decreased to 5.6 nm. In addition, BaLuF{sub 5}:Yb/Tm/Gd upconversion nanoparticles (UCNPs) presented efficient near-infrared (NIR)-NIR UC luminescence. Therefore, it is expected that these ultra-small BaLuF{sub 5} nanocrystals with well-controlled shape, size, and UC emission have potential applications in biomedical imaging fields.

  16. Ependimoma myxopapilar sacro gigante con osteolisis

    OpenAIRE

    Ajler, Pablo; Landriel, Federico; Goldschmidt, Ezequiel; Campero, Álvaro; Yampolsky, Claudio

    2014-01-01

    Objetivo: la presentación de un caso de una paciente con un ependimoma sacro con extensa infiltración y destrucción ósea local. Descripción del caso: una mujer de 53 años acudió a la consulta por dolor lumbosacro y alteraciones sensitivas perineales y esfinterianas. La imágenes por Resonancia Magnética (IRM) y la Tomografía Axial Computada (TAC) mostraron una lesión expansiva gigante a nivel S2-S4 con extensa osteólisis e invasión de tejidos adyacentes. Se realizó una exéresis tumoral complet...

  17. Luminescent emission of LiF: Mg, Ti exposed to UV radiation; Emision luminiscente del LiF: Mg, Ti expuesto a la radiacion UV

    Energy Technology Data Exchange (ETDEWEB)

    Estrada G, A. [Estudiante de Facultad de Ciencias, UNAM, Circuito Exterior, 04500 Mexico D.F. (Mexico); Castano M, V.M. [Centro de Fisica Aplicada y Tecnologia Avanzada, UNAM, Campus Juriquilla, Queretaro (Mexico); Cruz Z, E.; Garcia F, F. [Instituto de Ciencias Nucleares UNAM, A.P. 70-543 Mexico D.F. (Mexico)

    2002-07-01

    It was investigated the luminescent emission stimulated by heat (Tl) of LiF: Mg, Ti crystals which were exposed to UV radiation coming from a mercury lamp. Since this crystal depends on the thermal history, it has been used a thermal treatment consisting of a baking at 380 C during one hour for each reading and they were irradiated with UV. The brilliance curves between 5 and 840 minutes of exposure in the face of UV light were obtained. An important loss in the response, starting from 150 minutes of irradiation was observed. Also the relative intensity of the brilliance curve decay when the crystals being stored in darkness and room temperature conditions, which is according to the results in the literature about. (Author)

  18. Luminescence of tartrate bridged dinuclear 2,2'-bipyridine platinum(ii) complexes: emission color controlled by intra- and inter-molecular interactions in the solid state.

    Science.gov (United States)

    Ohno, Keiji; Tanuma, Honami; Kusano, Yukiko; Kaizaki, Sumio; Nagasawa, Akira; Fujihara, Takashi

    2017-06-13

    Novel dinuclear Pt II complexes with a chiral (l-) and an achiral (meso-) tartrate [{Pt II (bpy)} 2 (μ-x-tart)] (bpy: 2,2'-bipyridine; tartH 2 2- : tartrate; x = l (1), meso (2)) and with a racemic (dl-) tartrate [{Pt II (bpy)} 2 (μ-d-tart)][{Pt II (bpy)} 2 (μ-l-tart)] (3) were synthesized, and the influence of their stereochemistry on their molecular and crystal structures affecting their luminescence was discussed. Effects of the dinuclearity on the structures and luminescence were revealed by comparison with those of a novel racemic mononuclear complex [Pt II (bpy)(d-tartH 2 )][Pt II (bpy)(l-tartH 2 )] (4). The X-ray crystallography showed the crystallization of 1 in two polymorphs, namely monoclinic 3[1·6H 2 O] (1α) and triclinic 2[1·6H 2 O] (1β), and those of other complexes in monoclinic hydrate crystals 2·12.5H 2 O, 3·4H 2 O, and 4·H 2 O. The chiral complexes in 1α, 1β, and 3·4H 2 O showed clamshell-like structures with Pt-Pt and π-π interactions, while the achiral complex in 2·12.5H 2 O displayed a twisted form without intramolecular interactions. The complexes in 1α were assembled in a right-handed helical arrangement through significant Pt-Pt interactions, and those in 1β and 3·4H 2 O were stacked in one-dimensional columns through significant and slight π-π interactions, respectively. The complex in 2·12.5H 2 O constructed an intermolecular dimer through Pt-Pt interactions with its adjacent complex. The crystal structure of 4·H 2 O displayed a three-dimensional network architecture through π-π interactions and hydrogen bonding. These crystals exhibited luminescence depending on their molecular and crystal structures (λ max nm = 535 (4·H 2 O), 569 (3·4H 2 O), 621 (2·12.5H 2 O), 649 (1β), and 656 (1α)). The formations of intermolecular dimers and clamshell-like structures through Pt-Pt interactions in 2·12.5H 2 O and in 3·4H 2 O, respectively, lead to red-shifts in emissions compared to 4·H 2 O, and further low

  19. Gigantism and Its Implications for the History of Life.

    Directory of Open Access Journals (Sweden)

    Geerat J Vermeij

    Full Text Available Gigantism-very large body size-is an ecologically important trait associated with competitive superiority. Although it has been studied in particular cases, the general conditions for the evolution and maintenance of gigantism remain obscure. I compiled sizes and dates for the largest species in 3 terrestrial and 7 marine trophic and habitat categories of animals from throughout the Phanerozoic. The largest species (global giants in all categories are of post-Paleozoic age. Gigantism at this level appeared tens to hundreds of millions of years after mass extinctions and long after the origins of clades in which it evolved. Marine gigantism correlates with high planktic or seafloor productivity, but on land the correspondence between productivity and gigantism is weak at best. All global giants are aerobically active animals, not gentle giants with low metabolic demands. Oxygen concentration in the atmosphere correlates with gigantism in the Paleozoic but not thereafter, likely because of the elaboration of efficient gas-exchange systems in clades containing giants. Although temperature and habitat size are important in the evolution of very large size in some cases, the most important (and rare enabling circumstance is a highly developed ecological infrastructure in which essential resources are abundant and effectively recycled and reused, permitting activity levels to increase and setting the stage for gigantic animals to evolve. Gigantism as a hallmark of competitive superiority appears to have lost its luster on land after the Mesozoic in favor of alternative means of achieving dominance, especially including social organization and coordinated food-gathering.

  20. Zinc-coordinated MOFs complexes regulated by hydrogen bonds: Synthesis, structure and luminescence study toward broadband white-light emission

    Science.gov (United States)

    Duan, Hui; Dan, Wenyan; Fang, Xiangdong

    2018-04-01

    Two new compounds, namely {[Zn(apc)2]·H2O}n (1) and [Zn(apc)2(H2O)2] (2), have been designed and synthesized with a multi-functional ligand 2-aminopyrimidine-5-carboxylic acid (Hapc). Both compounds were characterized by single crystal X-ray diffraction analysis (SC-XRD), elemental analysis (EA), infrared spectroscopy (IR), and thermogravimetric analysis (TG). In solid-state structures, 1 features a two-fold interpenetrating pillared-layer 3D framework with point symbol {83}2{86}, referring to tfa topology; while 2 exhibits a 3D framework based on super unit of Zn(apc)2(H2O)2 interconnected via hydrogen bonds. Furthermore, the luminescent properties of 1 and 2 were discussed.

  1. Controlling light emission in luminescent solar concentrators through use of dye molecules aligned in a planar manner by liquid crystals

    Energy Technology Data Exchange (ETDEWEB)

    Verbunt, Paul P.C.; Kaiser, Anton; Hermans, Ko; Broer, Dirk J.; Debije, Michael G. [Polymer Technology Chemical Engineering and Chemistry, Eindhoven University of Technology (Netherlands); Bastiaansen, Cees W.M. [Polymer Technology Chemical Engineering and Chemistry, Eindhoven University of Technology (Netherlands); School of Engineering and Materials Science, Queen Mary University of London (United Kingdom)

    2009-09-09

    A luminescent solar concentrator (LSC) is a potential low-cost enhancement of the standard large-area silicon photovoltaic panels for the generation of electricity from sunlight. In this work, guest-host systems are investigated using anisotropic fluorescent dyes and liquid crystal mesogens to control the direction of emitted light in the LSC. It is determined that up to 30% more light is emitted from the edge of an LSC waveguide with planar dye alignment parallel to the alignment direction than from any edge of an LSC with no alignment (isotropic). The aligned samples continue to show dichroic performance after additions of both edge mirrors and rear scattering layer. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  2. Excited-state intramolecular proton transfer (ESIPT) emission of hydroxyphenylimidazopyridine: computational study on enhanced and polymorph-dependent luminescence in the solid state.

    Science.gov (United States)

    Shigemitsu, Yasuhiro; Mutai, Toshiki; Houjou, Hirohiko; Araki, Koji

    2012-12-13

    Although 2-(2'-hydroxyphenyl)imidazo[1,2-a]pyridine (HPIP) is only weakly fluorescent in solution, two of its crystal polymorphs in which molecules are packed as stacked pairs and in nearly coplanar conformation exhibit bright excited-state intramolecular proton transfer (ESIPT) luminescence of different colors (blue-green and yellow). In order to clarify the enhanced and polymorph-dependent luminescence of HPIP in the solid state, the potential energy surfaces (PESs) of HPIP in the ground (S(0)) and excited (S(1)) states were analyzed computationally by means of ab initio quantum chemical calculations. The calculations reproduced the experimental photophysical properties of HPIP in solution, indicating that the coplanar keto form in the first excited (S(1)) state smoothly approaches the S(0)/S(1) conical intersection (CI) coupled with the twisting motion of the central C-C bond. The S(1)-S(0) energy gap of the keto form became sufficiently small at the torsion angle of 60°, and the corresponding CI point was found at 90°. Since a minor role of the proximity effect was indicated experimentally and theoretically, the observed emission enhancement of the HPIP crystals was ascribed to the following two factors: (1) suppression of efficient radiationless decay via the CI by fixing the torsion angle at the nearly coplanar conformation of the molecules in the crystals and (2) inhibition of excimer formation resulting from the lower excited level of the S(1)-keto state compared to the S(0)-S(1) excitation energy in the enol form. However, the fluorescence color difference between the two crystal polymorphs having slightly different torsion angles was not successfully reproduced, even at the MS-CASPT2 level of theory.

  3. Kinetics of infrared stimulated luminescence from feldspars

    DEFF Research Database (Denmark)

    Jain, Mayank; Sohbati, Reza; Guralnik, Benny

    2015-01-01

    thermal and optical, of the infrared stimulated luminescence signal from feldspar. Based on the application of this model, it is concluded that different infra-red stimulated luminescence emissions (UV, blue, yellow and far-red) follow the same kinetics, and, therefore, involve participation of the same...... in feldspar. © 2015 Elsevier Ltd. All rights reserved....

  4. Sequential Growth of Uniform β-NaYF4@β-NaLnF4 (Ln = Y, Lu, Yb Microcrystals with Luminescent Properties of Multicolor Tuning and Dual-Mode Emission

    Directory of Open Access Journals (Sweden)

    Dandan Ju

    2017-12-01

    Full Text Available We synthesized the uniform core-shell microstructured compounds with hexagonal phase NaYF4:Er/Yb microrods as the core and hexagonal phase NaLnF4 (NaYbF4, NaLuF4:Yb/Tm, NaYF4:Yb/Er, NaYF4:Eu as the shell based on the hydrothermal reaction. These microscale core-shell structures provided a platform for the spatially confining optical process while possessing high luminescence efficiency. The thickness of the shell could be controlled by adjusting the amounts of shell precursor, which significantly affected the intensity of the shell dopant ions emission and the emission color of core-shell upconversion luminescence (UCL. The uniform NaYF4@NaLnF4 (Ln = Y, Lu, Yb microrods, with a series of rare-earth ions doped into the core and shell layer at various doping concentrations, achieved color-tuning of the upconversion (UC emission and dual-mode emission at the single-microcrystal level, thus allowing the efficient utilization of core-shell microcrystals in the photonics and security labeling. This study suggests a new class of luminescent materials in the microscopic field.

  5. Resonance-shifting luminescent solar concentrators

    Energy Technology Data Exchange (ETDEWEB)

    Giebink, Noel Christopher; Wiederrecht, Gary P; Wasielewski, Michael R

    2014-09-23

    An optical system and method to overcome luminescent solar concentrator inefficiencies by resonance-shifting, in which sharply directed emission from a bi-layer cavity into a glass substrate returns to interact with the cavity off-resonance at each subsequent reflection, significantly reducing reabsorption loss en route to the edges. In one embodiment, the system comprises a luminescent solar concentrator comprising a transparent substrate, a luminescent film having a variable thickness; and a low refractive index layer disposed between the transparent substrate and the luminescent film.

  6. Resonance-shifting luminescent solar concentrators

    Energy Technology Data Exchange (ETDEWEB)

    Giebink, Noel Christopher; Wiederrecht, Gary P.; Wasielewski, Michael R.

    2018-01-23

    An optical system and method to overcome luminescent solar concentrator inefficiencies by resonance-shifting, in which sharply directed emission from a bi-layer cavity into a glass substrate returns to interact with the cavity off-resonance at each subsequent reflection, significantly reducing reabsorption loss en route to the edges. In one embodiment, the system comprises a luminescent solar concentrator comprising a transparent substrate, a luminescent film having a variable thickness; and a low refractive index layer disposed between the transparent substrate and the luminescent film.

  7. Host-sensitized luminescence of Dy3+, Pr3+, Tb3+ in polycrystalline CaIn2O4 for field emission displays

    International Nuclear Information System (INIS)

    Liu Xiaoming; Pang Ran; Li Qin; Lin Jun

    2007-01-01

    CaIn 2 O 4 :Dy 3+ /Pr 3+ /Tb 3+ blue-white/green/green phosphors were prepared by the Pechini sol-gel process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), diffuse reflectance, photoluminescence (PL) and cathodoluminescence (CL) spectra as well as lifetimes were utilized to characterize the samples. The XRD results reveal that the samples begin to crystallize at 800 deg. C and pure CaIn 2 O 4 phase can be obtained after annealing at 900 deg. C. The FE-SEM images indicate that the CaIn 2 O 4 :Dy 3+ , CaIn 2 O 4 :Pr 3+ and CaIn 2 O 4 :Tb 3+ samples consist of spherical grains with size around 200-400 nm. Under the excitation of ultraviolet light and low-voltage electron beams (1-5 kV), the CaIn 2 O 4 :Dy 3+ , CaIn 2 O 4 :Pr 3+ and CaIn 2 O 4 :Tb 3+ phosphors show the characteristic emissions of Dy 3+ ( 4 F 9/2 - 6 H 15/2 and 4 F 9/2 - 6 H 13/2 transitions, blue-white), Pr 3+ ( 3 P 0 - 3 H 4 , 1 D 2 - 3 H 4 and 3 P 1 - 3 H 5 transitions, green) and Tb 3+ ( 5 D 4 - 7 F 6,5,4,3 transitions, green), respectively. All the luminescence is resulted from an efficient energy transfer from the CaIn 2 O 4 host lattice to the doped Dy 3+ , Pr 3+ and Tb 3+ ions, and the corresponding luminescence mechanisms have been proposed. - Graphical abstract: The CaIn 2 O 4 :Dy 3+ /Pr 3+ /Tb 3+ blue-white/green/green phosphors were prepared by the Pechini sol-gel process. Under the excitation of ultraviolet light and low-voltage electron beams (1-5 kV), the CaIn 2 O 4 :Dy 3+ , CaIn 2 O 4 :Pr 3+ and CaIn 2 O 4 :Tb 3+ phosphors show the characteristic emissions of Dy 3+ ( 4 F 9/2 - 6 H 15/2 and 4 F 9/2 - 6 H 13/2 transitions, blue-white), Pr 3+ ( 3 P 0 - 3 H 4 , 1 D 2 - 3 H 4 and 3 P 1 - 3 H 5 transitions, green) and Tb 3+ ( 5 D 4 - 7 F 6,5,4,3 transitions, green), respectively. All the luminescence is resulted from an efficient energy transfer from the CaIn 2 O 4 host lattice to the doped Dy 3+ , Pr 3+ and Tb 3+ ions

  8. Uranyl fluoride luminescence in acidic aqueous solutions

    International Nuclear Information System (INIS)

    Beitz, J.V.; Williams, C.W.

    1996-01-01

    Luminescence emission spectra and decay rates are reported for uranyl species in acidic aqueous solutions containing HF or added NaF. The longest luminescence lifetime, 0.269 ± 0.006 ms, was observed from uranyl in 1 M HF + 1 M HClO 4 at 296 K and decreased with increasing temperature. Based on a luminescence dynamics model that assumes equilibrium among electronically excited uranyl fluoride species and free fluoride ion, this long lived uranyl luminescence in aqueous solution is attributed primarily to UO 2 F 2 . Studies on the effect of added LiNO 3 or Na 2 WO 4 ·2H 2 O showed relatively weak quenching of uranyl fluoride luminescence which suggests that high sensitivity determination of the UF 6 content of WF 6 gas should be feasible via uranyl luminescence analysis of hydrolyzed gas samples of impure WF 6

  9. Paradigms and challenges for bioapplication of rare earth upconversion luminescent nanoparticles: small size and tunable emission/excitation spectra.

    Science.gov (United States)

    Sun, Ling-Dong; Wang, Ye-Fu; Yan, Chun-Hua

    2014-04-15

    Rare earth (RE) materials, which are excited in the ultraviolet and emit in the visible light spectrum, are widely used as phosphors for lamps and displays. In the 1960's, researchers reported an abnormal emission phenomenon where photons emitted from a RE element carried more energy than those absorbed, owing to the sequential energy transfer between two RE ions--Yb(3+)-sensitized Er(3+) or Tm(3+)--in the solid state. After further study, researchers named this abnormal emission phenomenon upconversion (UC) emission. More recent approaches take advantage of solution-based synthesis, which allows creation of homogenous RE nanoparticles (NPs) with controlled size and structure that are capable of UC emission. Such nanoparticles are useful for many applications, especially in biology. For these applications, researchers seek small NPs with high upconversion emission intensity. These UCNPs have the potential to have multicolor and tunable emissions via various activators. A vast potential for future development remains by developing molecular antennas and energy transfer within RE ions. We expect UCNPs with optimized spectra behavior to meet the increasing demand of potential applications in bioimaging, biological detection, and light conversion. This Account focuses on efforts to control the size and modulate the spectra of UCNPs. We first review efforts in size control. One method is careful control of the synthesis conditions to manipulate particle nucleation and growth, but more recently researchers have learned that the doping conditions can affect the size of UCNPs. In addition, constructing homogeneous core/shell structures can control nanoparticle size by adjusting the shell thickness. After reviewing size control, we consider how diverse applications impose different requirements on excitation and/or emission photons and review recent developments on tuning of UC spectral profiles, especially the extension of excitation/emission wavelengths and the adjustment

  10. Point defects and the blue emission in fired quartz at high doses: a comparative luminescence and EPR study

    Energy Technology Data Exchange (ETDEWEB)

    Woda, C.; Schilles, T.; Riser, U.; Mangini, A.; Wagner, G.A

    2002-07-01

    The dose response of the 375 deg/ C, 470 nm TL peak in fired quartz is studied by using thermoluminescence emission spectra and monochromatic glow curves. The blue emission displays a significant sensitivity increase for doses in excess of 1000 Gy, subsequent saturation at 16 kGy and a pre-dose effect over the entire dose range. Comparison with the growth of the known electron paramagnetic resonance centres and radioluminescence emission spectra indicates that the [AlO{sub 4}] centre is the recombination site for the blue emission, whereas the electron trap remains unknown. The sensitivity change seems to be linked to the dose-induced reduction of the [GeO{sub 4}/Li] centre. Possible mechanisms for the observed dose response are discussed. (author)

  11. luminescence properties

    Indian Academy of Sciences (India)

    Gd3+, Tb3+ and Lu3+ in MTiO3 (M = Mg and Sr) luminescence properties. 1085. Table 4. Phosphorescence properties of phosphors. Radiation. Radiation. Radiation. Undoped–doped. Phosphors intensity/a.u. colour wavelength (nm) radiation difference. MgTiO3. 600. Yellow. 514. –. MgTiO3:1 %Tb3+. 415. Yellow. 514.

  12. Late paleozoic fusulinoidean gigantism driven by atmospheric hyperoxia.

    Science.gov (United States)

    Payne, Jonathan L; Groves, John R; Jost, Adam B; Nguyen, Thienan; Moffitt, Sarah E; Hill, Tessa M; Skotheim, Jan M

    2012-09-01

    Atmospheric hyperoxia, with pO(2) in excess of 30%, has long been hypothesized to account for late Paleozoic (360-250 million years ago) gigantism in numerous higher taxa. However, this hypothesis has not been evaluated statistically because comprehensive size data have not been compiled previously at sufficient temporal resolution to permit quantitative analysis. In this study, we test the hyperoxia-gigantism hypothesis by examining the fossil record of fusulinoidean foraminifers, a dramatic example of protistan gigantism with some individuals exceeding 10 cm in length and exceeding their relatives by six orders of magnitude in biovolume. We assembled and examined comprehensive regional and global, species-level datasets containing 270 and 1823 species, respectively. A statistical model of size evolution forced by atmospheric pO(2) is conclusively favored over alternative models based on random walks or a constant tendency toward size increase. Moreover, the ratios of volume to surface area in the largest fusulinoideans are consistent in magnitude and trend with a mathematical model based on oxygen transport limitation. We further validate the hyperoxia-gigantism model through an examination of modern foraminiferal species living along a measured gradient in oxygen concentration. These findings provide the first quantitative confirmation of a direct connection between Paleozoic gigantism and atmospheric hyperoxia. © 2012 The Author(s). Evolution© 2012 The Society for the Study of Evolution.

  13. Ependimoma myxopapilar sacro gigante con osteolisis

    Science.gov (United States)

    Ajler, Pablo; Landriel, Federico; Goldschmidt, Ezequiel; Campero, Álvaro; Yampolsky, Claudio

    2014-01-01

    Objetivo: la presentación de un caso de una paciente con un ependimoma sacro con extensa infiltración y destrucción ósea local. Descripción del caso: una mujer de 53 años acudió a la consulta por dolor lumbosacro y alteraciones sensitivas perineales y esfinterianas. La imágenes por Resonancia Magnética (IRM) y la Tomografía Axial Computada (TAC) mostraron una lesión expansiva gigante a nivel S2-S4 con extensa osteólisis e invasión de tejidos adyacentes. Se realizó una exéresis tumoral completa con mejoría del estatus funcional. La anatomía patológica informó ependimoma mixopapilar. Discusión: la extensión de la resección quirúrgica es el mejor predictor de buen pronóstico. El tratamiento radiante se reserva como opción adyuvante para las resecciones incompletas y recidiva tumoral. La quimioterapia sólo debería utilizarse en casos en que la cirugía y la radioterapia estén contraindicadas. Conclusión: Los ependimomas mixopapilares sacros con destrucción ósea y presentación intra y extradural son muy infrecuentes y deben ser tenidos en cuenta entre los diagnósticos diferenciales preoperatorios. Su resección total, siempre que sea posible, es la mejor alternativa terapéutica. PMID:25165615

  14. Luminescent pincer platinum(II) complexes with emission quantum yields up to almost unity: photophysics, photoreductive C-C bond formation, and materials applications.

    Science.gov (United States)

    Chow, Pui-Keong; Cheng, Gang; Tong, Glenna So Ming; To, Wai-Pong; Kwong, Wai-Lun; Low, Kam-Hung; Kwok, Chi-Chung; Ma, Chensheng; Che, Chi-Ming

    2015-02-09

    Luminescent pincer-type Pt(II)  complexes supported by C-deprotonated π-extended tridentate RC^N^NR' ligands and pentafluorophenylacetylide ligands show emission quantum yields up to almost unity. Femtosecond time-resolved fluorescence measurements and time-dependent DFT calculations together reveal the dependence of excited-state structural distortions of [Pt(RC^N^NR')(CC-C6 F5 )] on the positional isomers of the tridentate ligand. Pt complexes [Pt(R-C^N^NR')(CC-Ar)] are efficient photocatalysts for visible-light-induced reductive CC bond formation. The [Pt(R-C^N^NR')(CC-C6 F5 )] complexes perform strongly as phosphorescent dopants for green- and red-emitting organic light-emitting diodes (OLEDs) with external quantum efficiency values over 22.1 %. These complexes are also applied in two-photon cellular imaging when incorporated into mesoporous silica nanoparticles (MSNs). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Hamartoma mamario gigante: dos casos de una entidad rara

    OpenAIRE

    T.A. Gomes-Rodrigues; A. López-Ojeda; J. Muñoz i Vidal; M.T. Soler-Monsó; J.M. Serra-Payro; A. Guma-Martínez; F. Chavarría-Marín; M. Dewever

    2014-01-01

    El hamartoma gigante de la mama es una entidad clínico-patológica inusual que tiende a confundirse con otros tumores. A pesar del avance en las técnicas diagnósticas, su diagnóstico clínico es difícil y normalmente solo se confirma cuando se analiza toda la pieza de resección. El diagnóstico diferencial debe incluir entidades como el fibroadenoma, lipoma, tumor phyllodes y diversos tipos de carcinomas. Presentamos 2 casos de hamartoma gigante de mama en mujeres de edad media, de los cuales un...

  16. Macrodystrophia lipomatosa: An unusual cause of localized gigantism

    Directory of Open Access Journals (Sweden)

    S Uma Maheswari

    2016-01-01

    Full Text Available Macrodystrophia lipomatosa (MDL is a rare congenital form of localized gigantism characterized by progressive overgrowth of all mesenchymal elements with a disproportionate increase in fibro adipose tissue. Here we report a case of 20 years old male who presented with history of painless gradual enlargement of entire left upper limb since childhood. Magnetic resonance imaging and histopathology confirmed the diagnosis of macrodystrophia lipomatosa. This condition has to be differentiated from other causes of localized gigantism, since these conditions differ in their course, prognosis, complications and treatment.

  17. Hydrothermal synthesis, characterization and luminescent ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Hydrothermal synthesis, characterization and luminescent properties of lanthanide-doped NaLaF 4 nanoparticles. JIGMET LADOL HEENA KHAJURIA SONIKA KHAJURIA ... Keywords. Citric acid; X-ray diffraction; down-conversion emission; energy transfer.

  18. Persistent luminescence nanothermometers

    Science.gov (United States)

    Martín Rodríguez, Emma; López-Peña, Gabriel; Montes, Eduardo; Lifante, Ginés; García Solé, José; Jaque, Daniel; Diaz-Torres, Luis Armando; Salas, Pedro

    2017-08-01

    Persistent phosphorescence nanoparticles emitting in the red and near-infrared spectral regions are strongly demanded as contrast nanoprobes for autofluorescence free bioimaging and biosensing. In this work, we have developed Sr4Al14O25:Eu2+, Cr3+, Nd3+ nanopowders that produce persistent red phosphorescence peaking at 694 nm generated by Cr3+ ions. This emission displays temperature sensitivity in the physiological temperature range (20-60 °C), which makes these nanoparticles potentially useful as fluorescence (contactless) nanothermometers operating without requiring optical excitation. Nd3+ ions, which act as shallow electron traps for the red Cr3+ persistent emission, also display infrared emission bands, extending the fluorescence imaging capability to the second biological window. This unique combination of properties makes these nanoparticles multifunctional luminescent probes with great potential applications in nanomedicine.

  19. 1er. Taller internacional sobre oso hormiguero gigante (Myrmecophaga tridactyla)

    OpenAIRE

    M.V. Guillermo Pérez Jimeno

    2008-01-01

    ResumenLos pasados días 2 y 3 de noviembre se llevó a cabo el 1er. Taller internacional sobre oso hormiguero gigante (Myrmecophaga tridactyla), en instalaciones del Zoológico de Florencio Varela. Participaron activamente representantes de Brasil, Colombia, Holanda, Alemania y Argentina.

  20. Sotos syndrome (cerebral gigantism: analysis of 8 cases

    Directory of Open Access Journals (Sweden)

    Melo Débora Gusmão

    2002-01-01

    Full Text Available Sotos syndrome or cerebral gigantism is characterized by macrocephaly, overgrowth, mental retardation and central nervous system abnormalities. Congenital heart defects may be present. We report 8 patients with this syndrome and relate their clinical features, neuroimaging and echocardiographic findings.

  1. Luminescence performance of Eu -doped lead-free zinc phosphate ...

    Indian Academy of Sciences (India)

    These glasses were characterized by several spectroscopic techniques at room temperature. All the glasses showed relatively broad fluorescence excitation and luminescence spectra. Luminescence spectra of these glasses exhibit characteristic emission of Eu3+ ion with an intense and most prominent red emission (614 ...

  2. Investigation on the preparation and luminescence emission of LaF{sub 3}:Eu{sup 3+}@LaF{sub 3}/SiO{sub 2} core-shell nanostructure

    Energy Technology Data Exchange (ETDEWEB)

    Shao, Jun, E-mail: jun-shao@snnu.edu.cn; Wang, Zhaojin; Wang, Ruibo; Liu, Zhihui; Wang, Linxiao; Guo, Jingxia; Li, Xiaoyi; Zhang, Mingdi; Zhang, Chengyun; Zheng, Hairong, E-mail: hrzheng@snnu.edu.cn

    2017-05-15

    LaF{sub 3}:Eu{sup 3+}, LaF{sub 3}:Eu{sup 3+}@LaF{sub 3}, LaF{sub 3}:Eu{sup 3+}@CeF{sub 3} and LaF{sub 3}:Eu{sup 3+}@SiO{sub 2} nanoparticles were successfully synthesized via hydrothermal route and modified Stöber method. The surface property of LaF{sub 3}:Eu{sup 3+} particle was successfully modified by coating LaF{sub 3} and SiO{sub 2} shell onto the particle, which resulted in the change of the surface property and luminescence emission of LaF{sub 3}:Eu{sup 3+}. It was found that the surface quenchers were decreased and thus the nonradiative pathways were reduced with core/shell structure, which not only enhanced the yellow emission of the sample, but also changed the intensity ratio of the yellow to orange emission. The dependence of the shell property and shell thickness on the luminescence emission spectra were investigated systematically. The current investigation can provide useful information for developing applications in biological imaging, detection, and sensing and other aspects.

  3. Thermal quenching of luminescence processes in feldspars

    DEFF Research Database (Denmark)

    Poolton, N.R.J.; Bøtter-Jensen, L.; Duller, G.A.T.

    1995-01-01

    of these processes is, in general, thermally dependent, and leads either to enhancement or quenching of the luminescence with increasing temperature. Previous studies have measured the combined thermal activation characteristics of all three processes, and show a strong dependence on stimulation energy....... In this article, an initial attempt is made to isolate only the recombination part of the luminescence cycle, and determine its thermal characteristics separately. A Variety of luminescence transitions are examined in a range of both alkali and plagioclase feldspars; three distinct emission types are identified...... of the defect. The third category is the most difficult to analyse since it involves irreversible changes in the luminescence characteristics with increasing temperature; we consider these to be due to thermally-induced destruction or creation of luminescence centres. Most of the alkali and plagioclase...

  4. Luminescent screens

    International Nuclear Information System (INIS)

    Lu, C.-I.

    1982-01-01

    Luminescent screens which are useful for such purposes as intensifying screens for radiographs are comprised of a support bearing a layer of finely divided particles of a phosphor dispersed in a cross-linked polymeric matrix formed by heat-curing of a coating composition comprising an unsaturated cross-linkable polymer, a polymerizable acrylic monomer, a thermoplastic polyurethane elastomer, and a heat-activatable polymerization initiator. The phosphor layer includes voids formed by evaporation of an evaporable component which is present in the coating composition from which such layer is formed. (author)

  5. The luminescence of barium titanium phosphate, BaTi(PO4)2

    NARCIS (Netherlands)

    Blasse, G.; Dirksen, G.J.

    1979-01-01

    The luminescence of BaTi(PO4)2 is described. The yellow emission is due to titanate octahedra. This compound is one of the exceptional cases where the octahedral titanate luminescence can be described by a simple model.

  6. Evidence of organic luminescent centers in sol-gel-synthesized yttrium aluminum borate matrix leading to bright visible emission

    Energy Technology Data Exchange (ETDEWEB)

    Burner, Pauline; Salauen, Mathieu; Ibanez, Alain; Gautier-Luneau, Isabelle [Univ. Grenoble Alpes, Inst NEEL, Grenoble (France); CNRS, Inst NEEL, Grenoble (France); Sontakke, Atul D.; Viana, Bruno [PSL Research University, Chimie ParisTech - CNRS, Institut de Recherche de Chimie Paris (France); Bardet, Michel [Universite Grenoble Alpes, CEA, CNRS, INAC, MEM, Grenoble (France); Mouesca, Jean-Marie; Gambarelli, Serge; Maurel, Vincent [Universite Grenoble Alpes, CEA, CNRS, INAC, SyMMES, Grenoble (France); Barra, Anne-Laure [Laboratoire National des Champs Magnetiques Intenses, UPR CNRS 3228, Universite Grenoble Alpes, Grenoble (France); Ferrier, Alban [PSL Research University, Chimie ParisTech - CNRS, Institut de Recherche de Chimie Paris (France); Sorbonne Universites UPMC Universites Paris 06, Paris (France)

    2017-11-06

    Yttrium aluminum borate (YAB) powders prepared by sol-gel process have been investigated to understand their photoluminescence (PL) mechanism. The amorphous YAB powders exhibit bright visible PL from blue emission for powders calcined at 450 C to broad white PL for higher calcination temperature. Thanks to {sup 13}C labelling, NMR and EPR studies show that propionic acid initially used to solubilize the yttrium nitrate is decomposed into aromatic molecules confined within the inorganic matrix. DTA-TG-MS analyses show around 2 wt % of carbogenic species. The PL broadening corresponds to the apparition of a new band at 550 nm, associated with the formation of aromatic species. Furthermore, pulsed ENDOR spectroscopy combined with DFT calculations enables us to ascribe EPR spectra to free radicals derived from small (2 to 3 rings) polycyclic aromatic hydrocarbons (PAH). PAH molecules are thus at the origin of the PL as corroborated by slow afterglow decay and thermoluminescence experiments. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  7. Luminescence of ions with s2 configuration

    International Nuclear Information System (INIS)

    Steen, A. van der.

    1980-01-01

    Some Bi 3+ -activated oxidic compounds show a red luminescence (e.g. BaSO 4 -Bi 3+ and Ca 2 P 2 O 7 -Bi 3+ ); others show an ultraviolet emission (e.g. LaGaO 3 -Bi 3+ and Ln 2 SO 6 -Bi 3+ (Ln=Y, La, Lu)). This thesis investigates which factors are responsible for these large differences in the position of the emission bands, which factors determine the occurrence of vibrational structure in the luminescence spectra of an s 2 ion and what the influence of the non-radiative processes in the 3 P multiplet is on the luminescence characteristics of the luminescent materials. (Auth.)

  8. Controlled fabrication of luminescent and magnetic nanocomposites

    Science.gov (United States)

    Ma, Yingxin; Zhong, Yucheng; Fan, Jing; Huang, Weiren

    2018-03-01

    Luminescent and magnetic multifunctional nanocomposite is in high demand and widely used in many scales, such as drug delivery, bioseparation, chemical/biosensors, and so on. Although lots of strategies have been successfully developed for the demand of multifunctional nanocomposites, it is not easy to prepare multifunctional nanocomposites by using a simple method, and satisfy all kinds of demands simultaneously. In this work, via a facile and versatile method, luminescent nanocrystals and magnetic nanoparticles were successfully synthesized through self-assembly under vigorous stirring and ultrasonic treatment. These multifunctional nanocomposites are not only water stable but also find wide application such as magnetic separation and concentration with a series of moderate speed, multicolor fluorescence at different emission wavelength, high efficiency of the excitation and emission, and so on. By changing different kinds of luminescent nanocrystals and controlling the amount of luminescent and magnetic nanoparticles, a train of multifunctional nanocomposites was successfully fabricated via a versatile and robust method.

  9. Tyrannosauroid integument reveals conflicting patterns of gigantism and feather evolution.

    Science.gov (United States)

    Bell, Phil R; Campione, Nicolás E; Persons, W Scott; Currie, Philip J; Larson, Peter L; Tanke, Darren H; Bakker, Robert T

    2017-06-01

    Recent evidence for feathers in theropods has led to speculations that the largest tyrannosaurids, including Tyrannosaurus rex , were extensively feathered. We describe fossil integument from Tyrannosaurus and other tyrannosaurids ( Albertosaurus, Daspletosaurus, Gorgosaurus and Tarbosaurus ), confirming that these large-bodied forms possessed scaly, reptilian-like skin. Body size evolution in tyrannosauroids reveals two independent occurrences of gigantism; specifically, the large sizes in Yutyrannus and tyrannosaurids were independently derived. These new findings demonstrate that extensive feather coverings observed in some early tyrannosauroids were lost by the Albian, basal to Tyrannosauridae. This loss is unrelated to palaeoclimate but possibly tied to the evolution of gigantism, although other mechanisms exist. © 2017 The Author(s).

  10. Studies of positron induced luminescence from polymers

    International Nuclear Information System (INIS)

    Xu, J.; Hulett, L.D. Jr.; Lewis, T.A.; Tolk, N.H.

    1994-01-01

    Light emission from polymers (anthracene dissolved in polystryrene) induced by low-energy positrons and electrons has been studied. Results indicate a clear difference between optical emissions under positron and electron bombardment. The positron-induced luminescence spectrum is believed to be generated by both collisional and annihilation processes

  11. Breast gigantism induced by D-penicillamine: case report

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Ji Hyeon; Kim, Hak Hee; Kim, Sun Mi; Seo, Myung Hee; Yoon, Hoi Soo [College of Medicine, Ulsan Univ., Seoul (Korea, Republic of)

    2004-03-01

    D-penicillamine, a chelating agent of copper, is the drug of choice for the treatment of Wilson's disease. Breast enlargement is a rare complication arising from its use, and we report a case of breast gigantism which developed after it had been used for ten months to treat this condition. Mammography demonstrated bilaterally enlarged dense breasts; ultrasonography, similarly, demonstrated enlargement, revealing the presence of a mass, shown at biopsy to be benign, in the left one.

  12. Sotos syndrome (cerebral gigantism): analysis of 8 cases

    OpenAIRE

    Melo, Débora Gusmão; Acosta, Angelina Xavier; Salles, Maria Aparecida de Almeida; Pina-Neto, João Monteiro de; Castro, José Daniel Vieira de; Santos, Antonio Carlos

    2002-01-01

    Sotos syndrome or cerebral gigantism is characterized by macrocephaly, overgrowth, mental retardation and central nervous system abnormalities. Congenital heart defects may be present. We report 8 patients with this syndrome and relate their clinical features, neuroimaging and echocardiographic findings. A síndrome de Sotos ou gigantismo cerebral é caracterizada por macrocefalia, hipercrescimento, dismorfias faciais típicas, deficiência mental e alterações do sistema nervoso central. Malfo...

  13. Proteus syndrome: A rare cause of gigantic limb

    OpenAIRE

    Chakrabarti, Nandini; Chattopadhyay, Chandan; Bhuban, Majhi; Pal, Salil Kumar

    2014-01-01

    A congenital disorder with variable manifestations, including partial gigantism of the hands and feet with hypertrophy of soles, nevi, hemihypertrophy, gynecomastia, macrocephaly and other skull abnormalities, and abdominal lipomatosis. The cause is unknown, although a genetic origin, generally of autosomal-dominant transmission, has been conjectured. Symptoms can be treated, but there is no known cure. We present the case of a young male with grotesque overgrowth of the right lower limb, spl...

  14. Roedores gigantes en el Museo de La Plata

    OpenAIRE

    Vucetich, María Guiomar; Deschamps, Cecilia Marcela

    2015-01-01

    Los roedores actuales son mamíferos pequeños, pocos superan los 10 kilos y el carpincho, como excepción, llega a pesar hasta 70 kilos. En la antigüedad existieron algunos que llegaron a tener el tamaño de una vaca. El Museo de La Plata tiene ejemplares de estos roedores gigantes únicos en el mundo. Fundación Museo La Plata

  15. Optically stimulated luminescence

    International Nuclear Information System (INIS)

    Espinosa, G.; Bogard, J.S.

    2007-01-01

    Full text: The use of Optically Stimulated Luminescence (OSL) for radiation dosimetry has become increasingly popular in recent years. The OSL method is based on luminescence emitted from semiconductor materials stimulated with specific wavelengths of light, after being exposed to ionizing radiation. The OSL intensity is a function of the radiation dose absorbed by the material. This work complements previous studies by the authors of the thermoluminescence (TL) response by SiO 2 commercial optical fiber exposed to ionizing radiation and provides preliminary results describing some of the material's OSL properties. Linear OSL response to beta radiation dose, along with a consistent shape of the photon emission curve with time, were observed using a green/blue OSL excitation laser. The reproducibility of OSL response after repeated irradiations and the change in intensity with time were also examined. The search and characterization of materials that exhibit this OSL response, in parallel with the continued development of OSL methodology and instrumentation, is an important scientific and commercial issue. (Author)

  16. Regioselective aromatic substitution reactions of cyclometalated Ir(III) complexes: synthesis and photochemical properties of substituted Ir(III) complexes that exhibit blue, green, and red color luminescence emission.

    Science.gov (United States)

    Aoki, Shin; Matsuo, Yasuki; Ogura, Shiori; Ohwada, Hiroki; Hisamatsu, Yosuke; Moromizato, Shinsuke; Shiro, Motoo; Kitamura, Masanori

    2011-02-07

    In this manuscript, the regioselective halogenation, nitration, formylation, and acylation of Ir(tpy)(3) and Ir(ppy)(3) (tpy = 2-(4'-tolyl)pyridine and ppy = 2-phenylpyridine) and the subsequent conversions are described. During attempted bromination of the three methyl groups in fac-Ir(tpy)(3) using N-bromosuccinimide (NBS) and benzoyl peroxide (BPO), three protons at the 5'-position (p-position with respect to the C-Ir bond) of phenyl rings in tpy units were substituted by Br, as confirmed by (1)H NMR spectra, mass spectra, and X-ray crystal structure analysis. It is suggested that such substitution reactions of Ir complexes proceed via an ionic mechanism rather than a radical mechanism. UV-vis and luminescence spectra of the substituted Ir(III) complexes are reported. The introduction of electron-withdrawing groups such as CN and CHO groups at the 5'-position of tpy induces a blue shift of luminescence emission to about 480 nm, and the introduction of electron-donating groups such as an amino group results in a red shift to about 600 nm. A reversible change of emission for the 5'-amino derivative of Ir(tpy)(3), Ir(atpy)(3), between red and green occurs upon protonation and deprotonation.

  17. Feldspar, Infrared Stimulated Luminescence

    DEFF Research Database (Denmark)

    Jain, Mayank

    2014-01-01

    This entry primarily concerns the characteristics and the origins of infrared-stimulated luminescence in feldspars.......This entry primarily concerns the characteristics and the origins of infrared-stimulated luminescence in feldspars....

  18. Water-Triggered Luminescent "Nano-bombs" Based on Supra-(Carbon Nanodots)

    NARCIS (Netherlands)

    Lou, Q.; Qu, S.; Jing, P.; Ji, W.; Li, D.; Cao, J.; Zhang, H.; Liu, L.; Zhao, J.; Shen, D.

    2015-01-01

    Novel luminescent "nano-bombs" based on a self-assembled system of carbon-nanodots, termed supra-CDs, are developed. The luminescence of these luminescent "nano-bombs" depends strongly on water contact; they show weak emission in toluene and decompose in contact with water, resulting in strong

  19. Luminescent phosphor materials

    International Nuclear Information System (INIS)

    Jamieson, P.B.

    1980-01-01

    The invention relates to luminescent phosphors and in particular those phosphors which emit ultra-violet radiation when struck by X-rays. The formula of the phosphor is Lasub(1-x-y-z-a)Gdsub(x)Cesub(y)Tbsub(z)Thsub(a)XO 4 in which X represents phosphorus atoms, arsenic atoms or a mixture of phosphorus and arsenic atoms, x is 0.01 to 0.50 and preferably 0.05 to 0.30, y is 0 or up to 0.50, z is 0 or up to 0.10 and preferably 0 or up to 0.02, a is 0 or up to 0.02, and when X represents phosphor atoms alone y + z + a is at least 0.01. The phosphors emit strong ultra-violet radiation when irradiated by X-rays and so can be used in intensifying screens particularly where the photographic material is UV radiation sensitive. In this case the overall emission should be in the 250-400 nm wavelength range. Another use is in the emission coating of cathode ray tubes. Details of the characteristics of various compositions are given with examples of preparation and emission spectra. (UK)

  20. Proteus syndrome: A rare cause of gigantic limb

    Directory of Open Access Journals (Sweden)

    Nandini Chakrabarti

    2014-01-01

    Full Text Available A congenital disorder with variable manifestations, including partial gigantism of the hands and feet with hypertrophy of soles, nevi, hemihypertrophy, gynecomastia, macrocephaly and other skull abnormalities, and abdominal lipomatosis. The cause is unknown, although a genetic origin, generally of autosomal-dominant transmission, has been conjectured. Symptoms can be treated, but there is no known cure. We present the case of a young male with grotesque overgrowth of the right lower limb, splenomegaly and multiple nevi. Angiography revealed venous malformation within the limb. The findings are in conformity to the criteria for the Proteus syndrome.

  1. Proteus syndrome: A rare cause of gigantic limb.

    Science.gov (United States)

    Chakrabarti, Nandini; Chattopadhyay, Chandan; Bhuban, Majhi; Pal, Salil Kumar

    2014-04-01

    A congenital disorder with variable manifestations, including partial gigantism of the hands and feet with hypertrophy of soles, nevi, hemihypertrophy, gynecomastia, macrocephaly and other skull abnormalities, and abdominal lipomatosis. The cause is unknown, although a genetic origin, generally of autosomal-dominant transmission, has been conjectured. Symptoms can be treated, but there is no known cure. We present the case of a young male with grotesque overgrowth of the right lower limb, splenomegaly and multiple nevi. Angiography revealed venous malformation within the limb. The findings are in conformity to the criteria for the Proteus syndrome.

  2. Anti-Stokes shift luminescent materials for bio-applications.

    Science.gov (United States)

    Zhu, Xingjun; Su, Qianqian; Feng, Wei; Li, Fuyou

    2017-02-20

    Anti-Stokes shift luminescence is a special optical process, which converts long-wavelength excitation to short-wavelength emission. This unique ability is especially helpful for bio-applications, because the longer-wavelength light source, usually referring to near infrared light, has a larger penetration depth offering a longer working distance for in vivo applications. The anti-Stokes shift luminescence signal can also be distinguished from the auto-fluorescence of biological tissues, thus reducing background interference during bioimaging. Herein, we summarize recent advances in anti-Stokes shift luminescent materials, including lanthanide and triplet-triplet-annihilation-based upconversion nanomaterials, and newly improved hot-band absorption-based luminescent materials. We focus on the synthetic strategies, optical optimization and biological applications as well as present comparative discussions on the luminescence mechanisms and characteristics of these three types of luminescent materials.

  3. Lanthanide Organic Framework Luminescent Thermometers.

    Science.gov (United States)

    Rocha, João; Brites, Carlos D S; Carlos, Luís D

    2016-10-10

    Metal-organic frameworks (MOFs) are excellent platforms for engineering luminescence properties as their building blocks, metal ions, linkers, and guest ions or molecules, are all potential sources of light emission. Temperature is one of the most important physical properties affecting the dynamics and viability of natural and engineered systems. Because the luminescence of certain lanthanide-bearing MOFs changes considerably with temperature, in the last few years, these materials have been explored as optical thermometers, especially in temperature sensing based on the intensity ratios of two separate electronic transitions. This review discusses the main concepts and ideas assisting the design of such ratiometric thermometers, and identifies the main challenges presented to this nascent field: develop nanothermometers for bio-applications and nanomedicine; understand the energy transfer mechanisms determining the thermal sensitivity; achieve effective primary thermometers; realize multifunctional nanothermometers; integrate Ln 3+ -based thermometers in commercial products. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Oxide/polymer nanocomposites as new luminescent materials

    Science.gov (United States)

    Vollath, D.; Szabó, D. V.; Schlabach, S.

    2004-06-01

    It is demonstrated that nanocomposites, consisting of an electrically insulating oxide core and PMMA coating exhibit strong luminescence. This luminescence is connected to the interface, where PMMA is bond via a carboxylate bonding to the surface. In this case, luminescence is originated at the carbonyl group of the coating polymer. With decreasing particle size, this emission shows a blue shift, following a law inversely the ones found for quantum confinement systems. For semi-conducting oxides, such as ZnO, this interface related emission is found additionally to quantum confinement phenomena.

  5. Understanding the influence of nanoenvironment on luminescence ...

    Indian Academy of Sciences (India)

    The role of the rare-earth ion concentration, crystal size and crystal phase on the up- and downconversion emission of rare-earth ions in oxide nanocrystals and their underlying mechanisms are discussed. It is also found that the luminescence lifetime of the excited state rare-earth ions is sensitive to the particle crystalline ...

  6. luminescence in coloured alkali halide crystals

    Indian Academy of Sciences (India)

    irradiated alkali halide crystals are similar to the luminescence excited by high energy radiation. Ueta et al [11] ... emission, a correlation between the deformation bleaching and mechanoluminescence of coloured alkali ..... [32] V P Zakrevskii, T S Orlova and A V Shuldiner, J. Solid State 37, 675 (1995). [33] C D Clark and ...

  7. Enhancing and quenching luminescence with gold nanoparticle films: the influence of substrate on the luminescent properties

    International Nuclear Information System (INIS)

    Guidelli, Eder José; Baffa, Oswaldo; Ramos, Ana Paula

    2016-01-01

    Gold nanoparticle (AuNP) films were sputtered over glass and aluminum substrates to enhance optically stimulated luminescence (OSL), a luminescent technique employed for radiation detection, from x-ray irradiated NaCl nanocrystals. The AuNP films deposited over glass led to enhanced-OSL emission, whereas the AuNP films deposited on aluminum substrates quenched the OSL emission. The enhanced-OSL intensity is proportional to the optical density of the film's plasmon resonance band at the stimulation wavelength. For the case of the AuNP/aluminum films, the luminescence quenching diminishes, and OSL intensity partially recovers upon increasing the distance between the AuNPs and the aluminum substrates, and between the luminescent nanocrystals and the AuNP films. These results suggest that plasmonic interactions between the emitter nanocrystals, the localized surface plasmons (LSP) of the AuNPs, and the substrate are responsible for the OSL enhancement and quenching. In this sense, the substrate dictates whether LSP relaxation occurs by radiative or non-radiative transisitions, leading to enhanced or quenched OSL, respectively. Therefore, besides showing that AuNP films can enhance and/or tune the sensitivity of luminescent radiation detectors, and demonstrating OSL as a new technique to investigate mechanisms of plasmon-enhanced luminescence, these results bring insights on how substrates strongly modify the optical properties of AuNP films. (paper)

  8. Luminescent beam stop

    Energy Technology Data Exchange (ETDEWEB)

    Bryant, Diane; Morton, Simon A.

    2017-10-25

    This disclosure provides systems, methods, and apparatus related to beam stops. In one aspect, a device comprises a luminescent material, a beam stop plate, and an optical fiber. The luminescent material is a parallelepiped having a first side and a second side that are squares and having a third side that is a rectangle or a square. The first side and the second side are perpendicular to the third side. The beam stop plate is attached to the first side of the luminescent material. The optical fiber has a first end and a second end, with the first end of the optical fiber attached to the third side of the luminescent material.

  9. Emission of thermally stimulated luminescence in mixed monocrystals KCl-KBr: Pb2+, KCl: Pb2+ and KBr: Pb2+ exposed at low doses

    International Nuclear Information System (INIS)

    Cruz Z, E.; Ramos B, S.; Melendrez A, R.; Chernov, V.; Piters, T.M.; Barboza F, M.; Hernandez A, J.; Murrieta S, H.

    2002-01-01

    It is reported the behavior of solid solutions of mixed crystals KCl 1-x KBr x doped with divalent lead which were exposed to gamma radiation. The mixtures of KCl-KBr were varied, with x equivalents at 2, 50, 65, and 85 % including the extremes KCl: Pb 2+ and KBr: Pb 2+ . It was maintained a concentration of divalent lead between 20 and 40 ppm in the crystalline lattice. The production of the generated defects by radiation have been correlated with the increase in the brilliance curves depending on the received dose by the mixed doped crystal. It has been used the thermal stimulation (Tl) for obtaining the crystal luminescence depending on the dose until 130 Gy with gammas of cobalt 60. The results shows that this mixed crystalline material of varied composition responds adequately to low doses which indicates that this would be a good detector of ionizing radiation. The results have been correlated with the optical properties of this mixed doped crystal, however it has been found that exists an important loss of luminescence depending on the halogen quantity presents in the mixed crystal. (Author)

  10. Time-resolved luminescence from quartz: An overview of contemporary developments and applications

    Science.gov (United States)

    Chithambo, M. L.; Ankjærgaard, C.; Pagonis, V.

    2016-01-01

    Time-resolved optical stimulation of luminescence has become established as a key method for measurement of optically stimulated luminescence from quartz, feldspar and α-Al2O3:C, all materials of interest in dosimetry. The aim of time-resolved optical stimulation is to separate in time the stimulation and emission of luminescence. The luminescence is stimulated from a sample using a brief light pulse and the emission monitored during stimulation in the presence of scattered stimulating light or after pulsing, over photomultiplier noise only. Although the use of the method in retrospective dosimetry has been somewhat limited, the technique has been successfully applied to study mechanisms in the processes leading up to luminescence emission. The main means for this has been the temperature dependence of the luminescence intensity as well as the luminescence lifetimes determined from time-resolved luminescence spectra. In this paper we review some key developments in theory and applications to quartz including methods of evaluating lifetimes, techniques of evaluating kinetic parameters using both the dependence of luminescence intensity and lifetime on measurement temperature, and of lifetimes on annealing temperature. We then provide an overview of some notable applications such as separation of quartz signals from a quartz-feldspar admixture and the utility of the dynamic throughput, a measure of luminescence measured as a function of the pulse width. The paper concludes with some suggestions of areas where further exploration would advance understanding of dynamics of luminescence in quartz and help address some outstanding problems in its application.

  11. Condiloma acuminado gigante (tumor de Buschke-Lowenstein

    Directory of Open Access Journals (Sweden)

    Ibis Beltrán Pérez

    Full Text Available Se presenta un paciente masculino de 72 años de edad de la raza blanca, que es remitido al Servicio de Coloproctología por presentar desde hace más de un año, aumento de volumen alrededor del ano que le dificulta la defecación y sentarse. Se han realizado múltiples tratamientos tópicos con resultados no satisfactorios por el servicio de dermatología. Se le realiza estudio histopatológico de la lesión y se obtuvo un condiloma acuminado gigante (tumor de Buschke-Lowenstein. Se ha dado seguimiento sin presentarse hasta el momento recurrencia. El tumor de Buschke-Lowenstein es una entidad rara, considerada una lesión premaligna provocada por el papiloma virus humano. Hasta el momento no se ha podido encontrar el tratamiento ideal y continúa presentando una alta tasa de recurrencia.

  12. Methodology of growing gigantic sapphire for GSLW project

    Science.gov (United States)

    Abgaryan, Artoush A.; Hartounian, Gomidas

    2005-09-01

    In our present world the Crystal Growth Technology does not have the necessary and sufficient conditions to manufacture large sizes; especially in the Sapphire Crystal world. We have a theoretical and methodological development for growing gigantic Sapphire Crystal Lenses. Our gigantic Sapphire Crystal Lenses have a unique optical characteristic which will be used in the Global System of Laser Weapons (GSLW); hence solving one of the crucial problems in the Relay Mirror System; where it captures the Laser beam from the earth surface, cleaning the beam in the Satellite and redirecting the laser energy to the precise desired target. Developed and solution for the temperature and heat-elasticity fields in growth systems are considered theoretical, in order to assess their effects on the optical symmetry of the growing crystal. The process is modeled using three-dimensional curvilinear coordinates to describe a closed, low-strain heat-elasticity system, with allowance made for the temperature variations of the thermal properties of the multilayer growth system, and nonlinear and unsteady-state process with arbitrary boundary conditions. The results presented as plots of the strain, stress, displacement, and temperature fields; demonstrate the potential of the method for designing new growth units and improving the existing ones and suggesting that crystals, in general, without frustration of optical symmetry can, in principle, be grown. In order to solve generalized problem for large optics. It is required to have super and correct mathematical computing calculations, and using basic fundamental laws of nature regarding optical symmetry in the crystal, and discovering the radical "new wave method" for crystal growth technology.

  13. Gigantism caused by growth hormone secreting pituitary adenoma

    Directory of Open Access Journals (Sweden)

    Noorisaem Rhee

    2014-06-01

    Full Text Available Gigantism indicates excessive secretion of growth hormones (GH during childhood when open epiphyseal growth plates allow for excessive linear growth. Case one involved a 14.7-year-old boy presented with extreme tall stature. His random serum GH level was 38.4 ng/mL, and failure of GH suppression was noted during an oral glucose tolerance test (OGTT; nadir serum GH, 22.7 ng/mL. Magnetic resonance imaging (MRI of the brain revealed a 12-mm-sized pituitary adenoma. Transsphenoidal surgery was performed and a pituitary adenoma displaying positive immunohistochemical staining for GH was reported. Pituitary MRI scan was performed 4 months after surgery and showed recurrence/residual tumor. Medical treatment with a long-acting somatostatin analogue for six months was unsuccessful. As a result, secondary surgery was performed. Three months after reoperation, the GH level was 0.2 ng/mL and insulin-like growth factor 1 was 205 ng/mL. Case two involved a 14.9-year-old boy, who was referred to our department for his tall stature. His basal GH level was 9.3 ng/mL, and failure of GH suppression was reported during OGTT (nadir GH, 9.0 ng/mL. Pituitary MRI showed a 6-mm-sized pituitary adenoma. Surgery was done and histopathological examination demonstrated a pituitary adenoma with positive staining for GH. Three months after surgery, the GH level was 0.2 ng/mL and nadir GH during OGTT was less than 0.1 ng/mL. Pituitary MRI scans showed no residual tumor. We present two cases of gigantism caused by a GH-secreting pituitary adenoma with clinical and microscopic findings.

  14. High coating of Ru(II) complexes on gold nanoparticles for single particle luminescence imaging in cells.

    Science.gov (United States)

    Rogers, Nicola J; Claire, Sunil; Harris, Robert M; Farabi, Shiva; Zikeli, Gerald; Styles, Iain B; Hodges, Nikolas J; Pikramenou, Zoe

    2014-01-18

    Gold nanoparticles are efficiently labelled with a luminescent ruthenium complex, producing 13 and 100 nm diameter, monodisperse red-emissive imaging probes with luminescence lifetimes prolonged over the molecular unit. Single, 100 nm particles are observed in whole cell luminescence imaging which reveals their biomolecular association with chromatin in the nucleus of cancer cells.

  15. Cerium luminescence in nd0 perovskites

    International Nuclear Information System (INIS)

    Setlur, A.A.; Happek, U.

    2010-01-01

    The luminescence of Ce 3+ in perovskite (ABO 3 ) hosts with nd 0 B-site cations, specifically Ca(Hf,Zr)O 3 and (La,Gd)ScO 3 , is investigated in this report. The energy position of the Ce 3+ excitation and emission bands in these perovskites is compared to those of typical Al 3+ perovskites; we find a Ce 3+ 5d 1 centroid shift and Stokes shift that are larger versus the corresponding values for the Al 3+ perovskites. It is also shown that Ce 3+ luminescence quenching is due to Ce 3+ photoionization. The comparison between these perovskites shows reasonable correlations between Ce 3+ luminescence quenching, the energy position of the Ce 3+ 5d 1 excited state with respect to the host conduction band, and the host composition. - Graphical abstract: Ce 3+ decay times versus temperature for perovskites with nd 0 B-site cations.

  16. Magnetic-luminescent spherical particles synthesized by ultrasonic spray pyrolysis

    International Nuclear Information System (INIS)

    Michel, Norma L; Hirata, Gustavo A; Flores, Dora L

    2015-01-01

    The combination of magnetic and luminescent properties in a single particle system, opens-up a wide range of potential applications in biotechnology and biomedicine. In this work, we performed the synthesis of magnetic-luminescent Gd 2 O 3 :Eu 3+ @Fe 2 O 3 particles by ultrasonic spray pyrolysis performed in a tubular furnace. In order to achieve the composite formation, commercial superparamagnetic Fe 3 O 4 nanoparticles were coated with a luminescent Eu 3+ -doped Gd 2 O 3 shell in a low-cost one-step process. The spray pyrolysis method yields deagglomerated spherical shape magneto/luminescent particles. The photoluminescence spectra under UV excitation (λ Exc = 265 nm) of the magnetic Gd 2 O 3 :Eu 3+ @Fe 2 O 3 compound showed the characteristic red emission of Eu 3+ (λ Em = 612 nm). This magneto/luminescent system will find applications in biomedicine and biotechnology. (paper)

  17. Assessment of Unusual Gigantic Jets observed during the Monsoon season: First observations from Indian Subcontinent

    DEFF Research Database (Denmark)

    Singh, Rajesh; Maurya, Ajeet K.; Chanrion, Olivier

    2017-01-01

    Gigantic Jets are electric discharges from thunderstorm cloud tops to the bottom of ionosphere at similar to 90 km altitude and electrically connect the troposphere and lower ionosphere. Since their first report in 2002, sporadic observations have been reported from ground and space based...... observations. Here we report first observations of Gigantic Jets in Indian subcontinent over the Indo-Gangetic plains during the monsoon season. Two storms each produced two jets with characteristics not documented so far. Jets propagated similar to 37 km up remarkably in similar to 5 ms with velocity...... of these Gigantic jets suggests that Gigantic Jets may bend when initiated at the edge of clouds with misaligned vertical charge distribution....

  18. Urban primacy, gigantism, and international trade: Evidence from Asia and the Americas

    OpenAIRE

    Moomaw, Ronald L.; Alwosabi, Mohammed A.

    2003-01-01

    Gustavsson [1999] finds that policies that promote international trade increase the size of a country’s largest city relative to the country’s total population, which is defined here as an increase in urban gigantism. In contrast, Ades and Glaeser [1995] report urban gigantism is reduced by freer political institutions and, with less confidence, more open trade. In light of Henderson’s (2000) findings that excessive urban concentration inhibits economic growth, these conflicting results for t...

  19. Hormonal control of luminescence from lantern shark (Etmopterus spinax) photophores.

    Science.gov (United States)

    Claes, Julien M; Mallefet, Jérôme

    2009-11-01

    The velvet belly lantern shark (Etmopterus spinax) emits a blue luminescence from thousands of tiny photophores. In this work, we performed a pharmacological study to determine the physiological control of luminescence from these luminous organs. Isolated photophore-filled skin patches produced light under melatonin (MT) and prolactin (PRL) stimulation in a dose-dependent manner but did not react to classical neurotransmitters. The alpha-melanocyte-stimulating hormone (alpha-MSH) had an inhibitory effect on hormonal-induced luminescence. Because luzindole and 4P-PDOT inhibited MT-induced luminescence, the action of this hormone is likely to be mediated through binding to the MT2 receptor subtype, which probably decreases the intracellular concentration of cyclic AMP (cAMP) because forskolin (a cAMP donor) strongly inhibits the light response to MT. However, PRL seems to achieve its effects via janus kinase 2 (JAK2) after binding to its receptor because a specific JAK2 inhibitor inhibits PRL-induced luminescence. The two stimulating hormones showed different kinetics as well as a seasonal variation of light intensity, which was higher in summer (April) than in winter (December and February). All of these results strongly suggest that, contrary to self-luminescent bony fishes, which harbour a nervous control mechanism of their photophore luminescence, the light emission is under hormonal control in the cartilaginous E. spinax. This clearly highlights the diversity of fish luminescence and confirms its multiple independent apparitions during the course of evolution.

  20. Luminescence techniques: Instrumentation and methods

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.

    1997-01-01

    This paper describes techniques, instruments and methods used in luminescence dating and environmental dosimetry in many laboratories around the world. These techniques are based on two phenomena - thermally stimulated luminescence and optically stimulated luminescence. The most commonly used...... luminescence stimulation and detection techniques are reviewed and information is given on recent developments in instrument design and on the stale of the art in luminescence measurements and analysis. (C) 1998 Elsevier Science Ltd. All rights reserved....

  1. Effect of oxygen concentration on singlet oxygen luminescence detection

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Longchao; Lin, Lisheng; Li, Yirong; Lin, Huiyun; Qiu, Zhihai [MOE Key Laboratory of OptoElectronic Science and Technology for Medicine, Fujian Provincial Key Laboratory for Photonics Technology, Fujian Normal University, Fuzhou 350007 (China); Gu, Ying [Department of Laser Medicine, Chinese PLA General Hospital, Beijing 100853 (China); Li, Buhong, E-mail: bhli@fjnu.edu.cn [MOE Key Laboratory of OptoElectronic Science and Technology for Medicine, Fujian Provincial Key Laboratory for Photonics Technology, Fujian Normal University, Fuzhou 350007 (China)

    2014-08-01

    Singlet oxygen ({sup 1}O{sub 2}) is a major phototoxic component in photodynamic therapy (PDT) and its generation is dependent on the availability of tissue oxygen. To examine the effect of oxygen concentration on {sup 1}O{sub 2} detection, two hydrophilic photosensitizer (PS), rose bengal (RB) and meso-metra (N-methyl-4-pyridyl) porphine tetra tosylate (TMPyP) were used as model PS. Irradiation was carried out using 523 nm under hypoxic (2%, 13%), normoxic (21%) and hyperoxic (65%) conditions. The spectral and spatial resolved {sup 1}O{sub 2} luminescence was measured by near-infrared (NIR) photomultiplier tube (PMT) and camera, respectively. Upon the irradiation, the emission signal mainly consisted of background scattering light, PS fluorescence and phosphorescence, and {sup 1}O{sub 2} luminescence. The PS phosphorescence was evidently dependent on the oxygen concentration and PS type, which resulted in the change of emission profile of {sup 1}O{sub 2} luminescence. This change was further demonstrated on {sup 1}O{sub 2} luminescence image. The present study suggests that the low oxygen concentration could affect {sup 1}O{sub 2} luminescence detection. - Highlights: • Both spectral and spatial resolved {sup 1}O{sub 2} luminescence measurements were performed. • Effect of oxygen concentration on {sup 1}O{sub 2} generation was quantitatively evaluated. • Low oxygen concentration could affect {sup 1}O{sub 2} luminescence detection.

  2. Enhanced luminescence and white light emission from Eu(3+) -co-doped K3 Ca2 (SO4 )3 Cl:Dy(3+) phosphor with near visible ultraviolet excitation for white LEDs.

    Science.gov (United States)

    Baig, N; Dhoble, N S; Park, K; Kokode, N S; Dhoble, S J

    2015-06-01

    The luminescent properties of europium (Eu)- and dysprosium (Dy)-co-doped K3 Ca2 (SO4 )3 Cl halosulfate phosphors were analyzed. This paper reports the photoluminescence (PL) properties of K3 Ca2 (SO4 )3 Cl microphosphor doped with Eu and Dy and synthesized using a cost-effective wet chemical method. The phosphors were characterized by X-ray diffraction and scanning electron microscopy. The CIE coordinates were calculated to display the color of the phosphor. PL emission of the prepared samples show peaks at 484 nm (blue), 575 nm (yellow), 594 nm (orange) and 617 nm (red). The emission color of the Eu,Dy-co-doped K3 Ca2 (SO4 )3 Cl halophosphor depends on the doping concentration and excitation wavelength. The addition of Eu in K3 Ca2 (SO4 )3 Cl:Dy greatly enhances the intensity of the blue and yellow peaks, which corresponds to the (4)  F9/2  → (6) H15/2 and (4)  F9/2  → (6) H13/2 transitions of Dy(3+) ions (under 351 nm excitation). The Eu(3+) /Dy(3+) co-doping also produces white light emission for 1 mol% of Eu(3+) , 1 mol% of Dy(3+) in the K3 Ca2 (SO4 )3 Cl lattice under 396 nm excitation, for which the calculated chromaticity coordinates are (0.35, 0.31). Thus, K3 Ca2 (SO4 )3 Cl co-doped with Eu/Dy is a suitable candidate for NUV based white light-emitting phosphors technology. Copyright © 2014 John Wiley & Sons, Ltd.

  3. Luminescence properties of porcelain ceramics relevant to restrospective radiation dosimetry

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.; Markey, B.G.; Poolton, N.R.J.

    1996-01-01

    When applied to porcelain products, optically stimulated luminescence (OSL) is a potentially viable method for use in dose reconstruction following contamination from nuclear accidents. However, dose sensitivities are highly variable, depending on what type of porcelain is being measured. This ap......When applied to porcelain products, optically stimulated luminescence (OSL) is a potentially viable method for use in dose reconstruction following contamination from nuclear accidents. However, dose sensitivities are highly variable, depending on what type of porcelain is being measured...... to have the highest sensitivities to radiation dose. Moreover, the presence of these phases is easily identifiable by characteristic signatures in the luminescence emission spectra....

  4. Europium enabled luminescent nanoparticles for biomedical applications

    International Nuclear Information System (INIS)

    Syamchand, S.S.; Sony, G.

    2015-01-01

    Lanthanide based nanoparticles are receiving great attention ought to their excellent luminescent and magnetic properties and find challenging biomedical applications. Among the luminescent lanthanide NPs, europium based NPs (Eu-NPs) are better candidates for immunoassay and imaging applications. The Eu-NPs have an edge over quantum dots (QDs) by means of their stable luminescence, long fluorescence lifetime, sharp emission peaks with narrow band width, lack of blinking and biocompatibility. This review surveys the synthesis and properties of a variety of Eu-NPs consolidated from different research articles, for their applications in medicine and biology. The exquisite luminescent properties of Eu-NPs are explored for developing biomedical applications such as immunoassay and bioimaging including multimodal imaging. The biomedical applications of Eu-NPs are mostly diagnostic in nature and mainly focus on various key analytes present in biological systems. The luminescent properties of europium enabled NPs are influenced by a number of factors such as the site symmetry, the metal nanoparticles, metal ions, quantum dots, surfactants, morphology of Eu-NPs, crystal defect, phenomena like antenna effect and physical parameters like temperature. Through this review we explore and assimilate all the factors which affect the luminescence in Eu-NPs and coil a new thread of parameters that control the luminescence in Eu-NPs, which would provide further insight in developing Eu-based nanoprobes for future biomedical prospects. - Highlights: • The review describes 14 major factors that influence the luminescence properties of europium enabled luminescent nanoparticles (Eu-NPs). • Surveys different types of europium containing nanoparticles that have been reported for their biomedical applications. • Eu-NPs are conveniently divided into four different categories, based on the type of the substrates involved. The four categories are (1) virgin Eu-substrate based NPs; (2

  5. Monitoring Temperatures of Tires Using Luminescent Materials

    Science.gov (United States)

    Bencic, Timothy J

    2006-01-01

    A method of noncontact, optical monitoring of the surface temperature of a tire has been devised to enable the use of local temperature rise as an indication of potential or impending failures. The method involves the use of temperature-sensitive paint (or filler): Temperature-sensitive luminescent dye molecules or other luminescent particles are incorporated into a thin, flexible material coating the tire surface of interest. (Alternatively, in principle, the luminescent material could be incorporated directly into the tire rubber, though this approach has not yet been tested.) The coated surface is illuminated with shorter-wavelength light to excite longer-wavelength luminescence, which is observed by use of a charge-coupled-device camera or a photodetector (see Figure 1). If temporally constant illumination is used, then the temperature can be deduced from the known temperature dependence of the intensity response of the luminescence. If pulsed illumination is used, then the temperature can be deduced from the known temperature dependence of the time or frequency response of the luminescence. If sinusoidally varying illumination is used, then the temperature can be deduced from the known temperature dependence of the phase response of the luminescence. Unlike a prior method of monitoring the temperature at a fixed spot on a tire by use of a thermocouple, this method is not restricted to one spot and can, therefore, yield information on the spatial distribution of temperature: in particular, it enables the discovery of newly forming hot spots where damage may be starting. Also unlike in the thermocouple method, the measurements in this method are not vulnerable to breakage of wires in repeated flexing of the tire. Moreover, unlike in another method in which infrared radiation is monitored as an indication of surface temperature, the luminescence measurements in this method are not significantly affected by changes in infrared emissivity. This method has been

  6. Raman scattering and luminescence of high-Tc superconducting oxides

    International Nuclear Information System (INIS)

    Eremenko, V.V.; Gnezdilov, V.P.; Fomin, V.I.; Fugol', I.Ya.; Samovarov, V.N.

    1989-01-01

    Raman and luminescence spectra of high-T c superconducting oxides are summarized, mainly YBa 2 Cu 3 O 7-σ and partly La 2-x Ba x CuO 4-σ . In raman spectra we succeeded to distinguish electron scattering to define the energy gap Δ in the superconducting state. The luminescence spectra are due to the emission of oxygen and interaction with conduction electrons. 70 refs.; 13 figs

  7. Dimensions of luminescent oxidized and porous silicon structures

    Science.gov (United States)

    Schuppler, S.; Friedman, S. L.; Marcus, M. A.; Adler, D. L.; Xie, Y.-H.; Ross, F. M.; Harris, T. D.; Brown, W. L.; Chabal, Y. J.; Brus, L. E.; Citrin, P. H.

    1994-04-01

    X-ray absorption measurements from H-passivated porous Si and from oxidized Si nanocrystals, combined with electron microscopy, ir absorption, α recoil, and luminescence emission data, provide a consistent structural picture of the species responsible for the visible luminescence observed in these samples. The mass-weighted average structures in por-Si are particles, not wires, with dimensions significantly smaller than previously reported or proposed.

  8. Kinetics of infrared stimulated luminescence from feldspars

    International Nuclear Information System (INIS)

    Jain, M.; Sohbati, R.; Guralnik, B.; Murray, A.S.; Kook, M.; Lapp, T.; Prasad, A.K.; Thomsen, K.J.; Buylaert, J.P.

    2015-01-01

    We extend the localised transition model based on randomly varying recombination distances (Jain et al., 2012) to include Arrhenius analysis and truncated nearest neighbour distributions. The model makes important predictions regarding a) the physical understanding of the linear intercepts in the Arrhenius analysis for localised recombination systems and b) the relationship between charge depletion and shape of the luminescence decay curves; these predictions are successfully tested by experimental investigations. We demonstrate that this model successfully describes the kinetic behaviour, both thermal and optical, of the infrared stimulated luminescence signal from feldspar. Based on the application of this model, it is concluded that different infra-red stimulated luminescence emissions (UV, blue, yellow and far-red) follow the same kinetics, and, therefore, involve participation of the same electron (dosimetric) trap. The differences in thermal stabilities of the different emissions results from differences in number densities of the recombination sites. The results have implications for understanding the mechanism of the far-red emission, and the spatial distributions of recombination sites in feldspar. - Highlights: • Arrhenius analysis of IRSL based on localized transition model (Jain et al., 2012). • Kinetics of IRSL for the different emission bands. • A new analytical description for IRSL. • Demonstrating that feldspar IRSL is consistent with the predictions of the LTM.

  9. Gigantism and comparative life-history parameters of tyrannosaurid dinosaurs.

    Science.gov (United States)

    Erickson, Gregory M; Makovicky, Peter J; Currie, Philip J; Norell, Mark A; Yerby, Scott A; Brochu, Christopher A

    2004-08-12

    How evolutionary changes in body size are brought about by variance in developmental timing and/or growth rates (also known as heterochrony) is a topic of considerable interest in evolutionary biology. In particular, extreme size change leading to gigantism occurred within the dinosaurs on multiple occasions. Whether this change was brought about by accelerated growth, delayed maturity or a combination of both processes is unknown. A better understanding of relationships between non-avian dinosaur groups and the newfound capacity to reconstruct their growth curves make it possible to address these questions quantitatively. Here we study growth patterns within the Tyrannosauridae, the best known group of large carnivorous dinosaurs, and determine the developmental means by which Tyrannosaurus rex, weighing 5,000 kg and more, grew to be one of the most enormous terrestrial carnivorous animals ever. T. rex had a maximal growth rate of 2.1 kg d(-1), reached skeletal maturity in two decades and lived for up to 28 years. T. rex's great stature was primarily attained by accelerating growth rates beyond that of its closest relatives.

  10. Luminescent molecular rods - transition-metal alkynyl complexes.

    Science.gov (United States)

    Yam, Vivian Wing-Wah; Wong, Keith Man-Chung

    2005-01-01

    A number of transition-metal complexes have been reported to exhibit rich luminescence, usually originating from phosphorescence. Such luminescence properties of the triplet excited state with a large Stoke's shift, long lifetime, high luminescence quantum yield as well as lower excitation energy, are envisaged to serve as an ideal candidate in the area of potential applications for chemosensors, dye-sensitized solar cells, flat panel displays, optics, new materials and biological sciences. Organic alkynes (poly-ynes), with extended or conjugatedπ-systems and rigid structure with linear geometry, have become a significant research area due to their novel electronic and physical properties and their potential applications in nanotechnology. Owing to the presence of unsaturated sp-hybridized carbon atoms, the alkynyl unit can serve as a versatile building block in the construction of alkynyl transition-metal complexes, not only throughσ-bonding but also viaπ-bonding interactions. By incorporation of linear alkynyl groups into luminescent transition-metal complexes, the alkynyl moiety with goodσ-donor,π-donor andπ-acceptor abilities is envisaged to tune or perturb the emission behaviors, including emission energy (color), intensity and lifetime by its role as an auxiliary ligand as well as to govern the emission origin from its direct involvement. This review summarizes recent efforts on the synthesis of luminescent rod-like alkynyl complexes with different classes of transition metals and details the effects of the introduction of alkynyl groups on the luminescence properties of the complexes.

  11. The effects of Tb 3 doping concentration on luminescence properties ...

    Indian Academy of Sciences (India)

    This paper is aimed at explaining the effects of Tb3+ concentration on structure and luminescence properties and clarifying the concentration quenching mechanism of Tb3+. The lattice of BaF2 decreases with the increase of Tb3+ ions concentration. The emission spectrum of BaF2:Tb3+ consists of blue emission band and ...

  12. Luminescence of nanocrystalline ZnSe:Mn2+

    NARCIS (Netherlands)

    Suyver, J.F.; Wuister, S.F.; Kelly, J.J.; Meijerink, A.

    2000-01-01

    The luminescence properties of nanocrystalline ZnSe:Mn^(2+) prepared via an inorganic chemical synthesis are described. Photoluminescence spectra show distinct ZnSe and Mn^(2+) related emissions, both of which are excited via the ZnSe host lattice. The Mn^(2+) emission wavelength and the

  13. Study of the luminescence properties of a natural amazonite

    International Nuclear Information System (INIS)

    Correcher, V.; Garcia-Guinea, J.

    2011-01-01

    Most gemstones, being natural materials (silicates, carbonates, phosphates, etc.), exhibit luminescence emission. This property could be potentially employed for personal dosimetry in the case of radiation accident or radiological terrorism where conventional monitoring has not been established. We, herein, report on the thermoluminescence (TL), radioluminescence (RL) and infra-red stimulated luminescence (IRSL) response of a well-characterised natural amazonite (KAlSi 3 O 8 ) that, due to its bright blue-green colour when polished, is used as a gemstone. The luminescence emission wavelengths, intensities and thermal kinetics of the amazonite luminescence curves reveal that the ultraviolet band measured on amazonite aliquots is similar to other common K-rich feldspars. On this basis, one can conclude (i) association between twinning and the UV-blue TL emission can be related to structural defects located in the twin-domain boundaries where ionic alkali-self-diffusion, irreversible water losses and irreversible dehydroxylation processes can be involved. (ii) Amazonite exhibits a complex structure with several planar defects (twinning and exsolution interphases which can hold hydroxyl groups, water molecules, etc.) and point defects (impurities, Na, Pb, Mn, etc.) that can act as luminescence centres, and in fact, green and red emissions are respectively associated with the presence of Mn and Fe impurities. Finally, (iv) the thermal stability tests performed on the TL emission of the amazonite confirm a continuum in the trap distribution, i.e. progressive changes in the glow curve shape, intensity and temperature position of the maximum peak.

  14. Study of the luminescence properties of a natural amazonite

    Energy Technology Data Exchange (ETDEWEB)

    Correcher, V., E-mail: v.correcher@ciemat.es [CIEMAT, Av. Complutense 22, Madrid 28040 (Spain); Garcia-Guinea, J. [Museo Nacional de Ciencias Naturales, CSIC, C/Jose Gutierrez Abascal 2, Madrid 28006 (Spain)

    2011-09-15

    Most gemstones, being natural materials (silicates, carbonates, phosphates, etc.), exhibit luminescence emission. This property could be potentially employed for personal dosimetry in the case of radiation accident or radiological terrorism where conventional monitoring has not been established. We, herein, report on the thermoluminescence (TL), radioluminescence (RL) and infra-red stimulated luminescence (IRSL) response of a well-characterised natural amazonite (KAlSi{sub 3}O{sub 8}) that, due to its bright blue-green colour when polished, is used as a gemstone. The luminescence emission wavelengths, intensities and thermal kinetics of the amazonite luminescence curves reveal that the ultraviolet band measured on amazonite aliquots is similar to other common K-rich feldspars. On this basis, one can conclude (i) association between twinning and the UV-blue TL emission can be related to structural defects located in the twin-domain boundaries where ionic alkali-self-diffusion, irreversible water losses and irreversible dehydroxylation processes can be involved. (ii) Amazonite exhibits a complex structure with several planar defects (twinning and exsolution interphases which can hold hydroxyl groups, water molecules, etc.) and point defects (impurities, Na, Pb, Mn, etc.) that can act as luminescence centres, and in fact, green and red emissions are respectively associated with the presence of Mn and Fe impurities. Finally, (iv) the thermal stability tests performed on the TL emission of the amazonite confirm a continuum in the trap distribution, i.e. progressive changes in the glow curve shape, intensity and temperature position of the maximum peak.

  15. Increasing lanthanide luminescence by use of the RETEL effect.

    Science.gov (United States)

    Leif, Robert C; Vallarino, Lidia M; Becker, Margie C; Yang, Sean

    2006-08-01

    Luminescent lanthanide complexes produce emissions with the narrowest-known width at half maximum; however, their significant use in cytometry required an increase in luminescence intensity. The companion review, Leif et al., Cytometry 2006;69A:767-778, described a new technique for the enhancement of lanthanide luminescence, the Resonance Energy Transfer Enhanced Luminescence (RETEL) effect, which increases luminescence and is compatible with standard slide microscopy. The luminescence of the europium ion macrocyclic complex, EuMac, was increased by employing the RETEL effect. After adding the nonluminescent gadolinium ion complex of the thenoyltrifluoroacetonate (TTFA) ligand or the sodium salt of TTFA in ethanol solution, the EuMac-labeled sample was allowed to dry. Both a conventional arc lamp and a time-gated UV LED served as light sources for microscopic imaging. The emission intensity was measured with a CCD camera. Multiple time-gated images were summed with special software to permit analysis and effective presentation of the final image. With the RETEL effect, the luminescence of the EuMac-streptavidin conjugate increased at least six-fold upon drying. Nuclei of apoptotic cells were stained with DAPI and tailed with 5BrdUrd to which a EuMac-anti-5BrdU conjugate was subsequently attached. Time-gated images showed the long-lived EuMac luminescence but did not show the short-lived DAPI fluorescence. Imaging of DNA-synthesizing cells with an arc lamp showed that both S phase and apoptotic cells were labeled, and that their labeling patterns were different. The images of the luminescent EuMac and fluorescent DAPI were combined to produce a color image on a white background. This combination of simple chemistry, instrumentation, and presentation should make possible the inexpensive use of the lanthanide macrocycles, Quantum Dyes, as molecular diagnostics for cytological and histopathological microscopic imaging. (c) 2006 International Society for Analytical

  16. Biosensing with Luminescent Semiconductor Quantum Dots

    OpenAIRE

    Sapsford, Kim E.; Pons, Thomas; Medintz, Igor L.; Mattoussi, Hedi

    2006-01-01

    Luminescent semiconductor nanocrystals or quantum dots (QDs) are a recently developed class of nanomaterial whose unique photophysical properties are helping to create a new generation of robust fluorescent biosensors. QD properties of interest for biosensing include high quantum yields, broad absorption spectra coupled to narrow size-tunable photoluminescent emissions and exceptional resistance to both photobleaching and chemical degradation. In this review, we examine the progress in adapti...

  17. Cisto gigante de colédoco Giant choledochal cyst

    Directory of Open Access Journals (Sweden)

    Olival Cirilo Lucena da Fonseca-Neto

    2007-12-01

    Full Text Available INTRODUÇÃO: A doença cística das vias biliares é anomalia congênita que pode acometer as vias biliares intra e/ou extra-hepáticas. A extra-hepática inclui os cistos de colédoco e a intra-hepática é conhecida por Doença de Caroli. Os cistos de colédoco de tamanho gigante são muito raros. OBJETIVO: Relatar o caso de um cisto de colédoco de tamanho gigante em uma paciente feminina. RELATO DE CASO: Mulher de 19 anos foi admitida com história de icterícia e acolia fecal há sete dias. Referia dor epigástrica associada com ingestão de dieta rica em gordura. Nos antecedentes pessoais relatou dois episódios de icterícia, aos 8 e 14 anos, que progrediram espontaneamente. No exame físico apresentava icterícia (+3/+4 e uma massa palpável indolor em mesogástrio foram os únicos achados. A ultrassonografia demonstrou grande formação cística de paredes finas adjacente ao hepatocolédoco, pâncreas e rim direito que media 18,5 x 10,2 cm. A colangioressonância confirmou o grande cisto de colédoco e hepatojejunoanastomose em "Y" de Roux após excisão do cisto e colecistectomia foi realizada. A formação cística media 20 x 15,5 x 12,5 cm e com um volume médio de 1000 mL. A paciente encontra-se em acompanhamento ambulatorial sem alterações hepatobiliares após o sétimo mês da operação. CONCLUSÃO: O cisto de colédoco deve fazer parte do diagnóstico diferencial em pacientes adultos jovens com icterícia e massa palpável; no entanto, a diferenciação entre ele e neoplasia maligna deve ser pesquisada.BACKGROUND: Choledochal cyst represents a rare congenital anomaly, eventually associated with intra and extrahepatic biliary tract disorders. Extrahepatic diseases include choledochal cysts and congenital dilation of the lower intrahepatic bile duct is known as Caroli's disease. Giant choledochal cyst constitutes a very rare abnormality. AIM:To report a giant choledochal cyst in a female patient. CASE REPORT: A 19-year

  18. Biology of the sauropod dinosaurs: the evolution of gigantism.

    Science.gov (United States)

    Sander, P Martin; Christian, Andreas; Clauss, Marcus; Fechner, Regina; Gee, Carole T; Griebeler, Eva-Maria; Gunga, Hanns-Christian; Hummel, Jürgen; Mallison, Heinrich; Perry, Steven F; Preuschoft, Holger; Rauhut, Oliver W M; Remes, Kristian; Tütken, Thomas; Wings, Oliver; Witzel, Ulrich

    2011-02-01

    The herbivorous sauropod dinosaurs of the Jurassic and Cretaceous periods were the largest terrestrial animals ever, surpassing the largest herbivorous mammals by an order of magnitude in body mass. Several evolutionary lineages among Sauropoda produced giants with body masses in excess of 50 metric tonnes by conservative estimates. With body mass increase driven by the selective advantages of large body size, animal lineages will increase in body size until they reach the limit determined by the interplay of bauplan, biology, and resource availability. There is no evidence, however, that resource availability and global physicochemical parameters were different enough in the Mesozoic to have led to sauropod gigantism. We review the biology of sauropod dinosaurs in detail and posit that sauropod gigantism was made possible by a specific combination of plesiomorphic characters (phylogenetic heritage) and evolutionary innovations at different levels which triggered a remarkable evolutionary cascade. Of these key innovations, the most important probably was the very long neck, the most conspicuous feature of the sauropod bauplan. Compared to other herbivores, the long neck allowed more efficient food uptake than in other large herbivores by covering a much larger feeding envelope and making food accessible that was out of the reach of other herbivores. Sauropods thus must have been able to take up more energy from their environment than other herbivores. The long neck, in turn, could only evolve because of the small head and the extensive pneumatization of the sauropod axial skeleton, lightening the neck. The small head was possible because food was ingested without mastication. Both mastication and a gastric mill would have limited food uptake rate. Scaling relationships between gastrointestinal tract size and basal metabolic rate (BMR) suggest that sauropods compensated for the lack of particle reduction with long retention times, even at high uptake rates. The

  19. Corticoides intralesionales en lesiones a células gigantes

    Directory of Open Access Journals (Sweden)

    J.P. Crestanello Nese

    2003-12-01

    Full Text Available Desde su descripción original, las lesiones de células gigantes (LCG han sido entidades controvertidas, desde el punto de vista de su origen, de su comportamiento clínico, de sus características radiográficas e histológicas, así como de su tratamiento. Para su tratamiento se han considerado alternativas quirúrgicas y no quirúrgicas. En este trabajo, se presentan tres nuevos casos de LCG, en los cuales se realizó infiltración intralesional con corticoides como una maniobra previa y complementaria a la quirúrgica. Luego de la infiltración, se observó una disminución del tamaño de las lesiones y un cambio en sus características macroscópicas, se trato por enucleación un caso y por remodelación quirúrgica los dos restantes.Giant cell lesions (GCL have been controversial entities since its original description. Its origin, clinical behavior, radiographic and histological features and also its treatment are polemical. The therapeutic possibilities are surgical or non surgical. In this paper, the intralesional infiltration with steroids is presented like a previous and complementary therapy to surgery alone. Three new cases of GCL are presented. All of them were first treated with intralesional infiltration with steroids. After that,a partial remission and a change of the macroscopic characteristics were observed and one of the lesion was then enucleated while for the others two surgical remodelation were necessary to do.

  20. Biosynthesis of myristic acid in luminescent bacteria

    International Nuclear Information System (INIS)

    Byers, D.M.

    1987-01-01

    In vivo pulse-label studies have demonstrated that luminescent bacteria can provide myritic acid (14:0) required for the synthesis of the luciferase substrate myristyl aldehyde. Luminescent wild type Vibrio harveyi incubated with [ 14 C] acetate in a nutrient-depleted medium accumulated substantial tree [ 14 C]fatty acid (up to 20% of the total lipid label). Radio-gas chromatography revealed that > 75% of the labeled fatty acid is 14:0. No free fatty acid was detected in wild type cells labeled prior to the development of bioluminescence in the exponential growth phase, or in a dark mutant of V. harveyi (mutant M17) that requires exogenous 14:0 for light emission. The preferential accumulation of 14:0 was not observed when wild type cells were labeled with [ 14 C]acetate in regular growth medium. Moreover, all V. harveyi strains exhibited similar fatty acid mass compositions regardless of the state of bioluminescence. Since earlier work has shown that a luminescence-related acyltransferase (defective in the M17 mutant) can catalyze the deacylation of fatty acyl-acyl carrier protein in vitro, the present results are consistent with a model in which this enzyme diverts 14:0 to the luminescence system during fatty acid biosynthesis. Under normal conditions, the supply of 14:0 by this pathway is tightly regulated such that bioluminescence development does not significantly alter the total fatty acid composition

  1. Luminescent Tension-Indicating Orthopedic Strain Gauges for Non-Invasive Measurements Through Tissue

    Science.gov (United States)

    Anker, Jeffrey (Inventor); Rogalski, Melissa (Inventor); Anderson, Dakota (Inventor); Heath, Jonathon (Inventor)

    2015-01-01

    Strain gauges that can provide information with regard to the state of implantable devices are described. The strain gauges can exhibit luminescence that is detectable through living tissue, and the detectable luminescent emission can vary according to the strain applied to the gauge. A change in residual strain of the device can signify a loss of mechanical integrity and/or loosening of the implant, and this can be non-invasively detected either by simple visual detection of the luminescent emission or through examination of the emission with a detector such as a spectrometer or a camera.

  2. Nd sup(3+): YLF luminescence quantum efficiency determination using photoacoustic spectroscopy

    International Nuclear Information System (INIS)

    Vieira, M.M.F.; Franca, E.J.; Bandochi, S.L.; Morato, S.P.

    1990-01-01

    The optical properties of Nd sup(3+):LiYF sub(4) crystals were studied using absorption, emission, excitation and photoacoustic spectroscopies. A new method based on parameters from these spectra was used to determine the luminescence quantum efficiency. This method was applied to four bands centered on 517, 577, 743 and 792 nm. The luminescence quantum efficiency values obtained are presented. (author)

  3. Spectral analysis in microscopy : a study of FRET and single quantum dot luminescence

    NARCIS (Netherlands)

    Frederix, Patrick Louis Theodorus Martin

    2001-01-01

    This thesis deals with the development of new techniques and luminescent markers, to improve the quality of luminescence studies in microscopy. A sensitive spectrograph that can be used for spectrally resolved emission spectroscopy in the microscope is described, including design considerations,

  4. Luminescence of Ce doped oxygen crystalline compounds based on Hf and Ba

    CERN Document Server

    Borisevich, A E; Lecoq, P

    2003-01-01

    The luminescence properties of the Ce-doped hafnium and barium compounds have been investigated to determine their potential as heavy scintillation materials. Compounds have been prepared by solid state synthesis. All of them have shown a bright luminescence attributed to trivalent cerium. Emission bands are peaked in the 425-475nm spectral region at room temperature.

  5. Certain relationships in the luminescence of organophosphors based on metal complexes

    International Nuclear Information System (INIS)

    Zel'tser, L.E.; Talipov, S.T.; Vereshchagina, N.G.

    1986-01-01

    A study has been made of general relationships in the luminescent radiation of organophosphors based on metal complexes and the specific features of chemical and analytical properties of organic analytical reagents in the electronically excited state. Routes have been proposed for activation of emission and for the improvement of metrological characteristics of the luminescence method of analysis

  6. An evolutionary cascade model for sauropod dinosaur gigantism--overview, update and tests.

    Directory of Open Access Journals (Sweden)

    P Martin Sander

    Full Text Available Sauropod dinosaurs are a group of herbivorous dinosaurs which exceeded all other terrestrial vertebrates in mean and maximal body size. Sauropod dinosaurs were also the most successful and long-lived herbivorous tetrapod clade, but no abiological factors such as global environmental parameters conducive to their gigantism can be identified. These facts justify major efforts by evolutionary biologists and paleontologists to understand sauropods as living animals and to explain their evolutionary success and uniquely gigantic body size. Contributions to this research program have come from many fields and can be synthesized into a biological evolutionary cascade model of sauropod dinosaur gigantism (sauropod gigantism ECM. This review focuses on the sauropod gigantism ECM, providing an updated version based on the contributions to the PLoS ONE sauropod gigantism collection and on other very recent published evidence. The model consist of five separate evolutionary cascades ("Reproduction", "Feeding", "Head and neck", "Avian-style lung", and "Metabolism". Each cascade starts with observed or inferred basal traits that either may be plesiomorphic or derived at the level of Sauropoda. Each trait confers hypothetical selective advantages which permit the evolution of the next trait. Feedback loops in the ECM consist of selective advantages originating from traits higher in the cascades but affecting lower traits. All cascades end in the trait "Very high body mass". Each cascade is linked to at least one other cascade. Important plesiomorphic traits of sauropod dinosaurs that entered the model were ovipary as well as no mastication of food. Important evolutionary innovations (derived traits were an avian-style respiratory system and an elevated basal metabolic rate. Comparison with other tetrapod lineages identifies factors limiting body size.

  7. An evolutionary cascade model for sauropod dinosaur gigantism--overview, update and tests.

    Science.gov (United States)

    Sander, P Martin

    2013-01-01

    Sauropod dinosaurs are a group of herbivorous dinosaurs which exceeded all other terrestrial vertebrates in mean and maximal body size. Sauropod dinosaurs were also the most successful and long-lived herbivorous tetrapod clade, but no abiological factors such as global environmental parameters conducive to their gigantism can be identified. These facts justify major efforts by evolutionary biologists and paleontologists to understand sauropods as living animals and to explain their evolutionary success and uniquely gigantic body size. Contributions to this research program have come from many fields and can be synthesized into a biological evolutionary cascade model of sauropod dinosaur gigantism (sauropod gigantism ECM). This review focuses on the sauropod gigantism ECM, providing an updated version based on the contributions to the PLoS ONE sauropod gigantism collection and on other very recent published evidence. The model consist of five separate evolutionary cascades ("Reproduction", "Feeding", "Head and neck", "Avian-style lung", and "Metabolism"). Each cascade starts with observed or inferred basal traits that either may be plesiomorphic or derived at the level of Sauropoda. Each trait confers hypothetical selective advantages which permit the evolution of the next trait. Feedback loops in the ECM consist of selective advantages originating from traits higher in the cascades but affecting lower traits. All cascades end in the trait "Very high body mass". Each cascade is linked to at least one other cascade. Important plesiomorphic traits of sauropod dinosaurs that entered the model were ovipary as well as no mastication of food. Important evolutionary innovations (derived traits) were an avian-style respiratory system and an elevated basal metabolic rate. Comparison with other tetrapod lineages identifies factors limiting body size.

  8. An Evolutionary Cascade Model for Sauropod Dinosaur Gigantism - Overview, Update and Tests

    Science.gov (United States)

    Sander, P. Martin

    2013-01-01

    Sauropod dinosaurs are a group of herbivorous dinosaurs which exceeded all other terrestrial vertebrates in mean and maximal body size. Sauropod dinosaurs were also the most successful and long-lived herbivorous tetrapod clade, but no abiological factors such as global environmental parameters conducive to their gigantism can be identified. These facts justify major efforts by evolutionary biologists and paleontologists to understand sauropods as living animals and to explain their evolutionary success and uniquely gigantic body size. Contributions to this research program have come from many fields and can be synthesized into a biological evolutionary cascade model of sauropod dinosaur gigantism (sauropod gigantism ECM). This review focuses on the sauropod gigantism ECM, providing an updated version based on the contributions to the PLoS ONE sauropod gigantism collection and on other very recent published evidence. The model consist of five separate evolutionary cascades (“Reproduction”, “Feeding”, “Head and neck”, “Avian-style lung”, and “Metabolism”). Each cascade starts with observed or inferred basal traits that either may be plesiomorphic or derived at the level of Sauropoda. Each trait confers hypothetical selective advantages which permit the evolution of the next trait. Feedback loops in the ECM consist of selective advantages originating from traits higher in the cascades but affecting lower traits. All cascades end in the trait “Very high body mass”. Each cascade is linked to at least one other cascade. Important plesiomorphic traits of sauropod dinosaurs that entered the model were ovipary as well as no mastication of food. Important evolutionary innovations (derived traits) were an avian-style respiratory system and an elevated basal metabolic rate. Comparison with other tetrapod lineages identifies factors limiting body size. PMID:24205267

  9. Influence of emissive hole-transporting materials on the electrical and luminescent performance of highly efficient white light organic light-emitting diodes

    Science.gov (United States)

    Wang, Ching-Wu; Chen, Shih-Fang; Kuo, Wen-Fa

    2002-09-01

    An emissive hole-transporting material with a dopant was proposed for realizing highly efficient and relatively pure white-light organic light-emitting diode (OLED). The device structure included ITO/N, N'-diphenyl-N, N'-bis(1-naphthyl-phenyl)-(1, 1'-biphenyl)-4,4'-diamine (NPB)/NPB doped with 4-Dicyanomethylene-2-methyl-6-[2, 3, 6, 7-tetra-hydro-1H, 5H-behzo[ij]-quinolizin-8-yl)vinyl]-4H-pyran (DCM2) (NPB:DCM2)/bathocuproine (BCP)/tris-(8-hydroxyquinoline) aluminum (Alq3)/Mg/Ag. By appropriately controlling the DCM2 doping concentration as well as thickness of the blue-red-emitting layer of NPB:DCM2, the white-light OLED has a relatively stable white color even the operating voltages change from 9 to 18 V.

  10. The luminescent concentrator. Stability issues

    Energy Technology Data Exchange (ETDEWEB)

    Slooff, L.H.; Budel, T.; Burgers, A.R.; Bakker, N.J. [ECN Solar Energy, P.O.Box 1, 1755 ZG Petten (Netherlands); Buechtemann, A.; Danz, R. [Fraunhofer-Institute for Applied Polymer Research, Geiselbergstr.69, D-14476 Golm (Germany); Meyer, T.; Meyer, A. [Solaronix SA, Rue de l' Ouriette 129, CH-1170 Aubonne (Switzerland)

    2007-08-15

    One of the major challenges in the research on luminescent concentrators is the lifetime of the luminescent polymer plates. There are some commercial plates available, but data on lifetime are very limited, especially when dedicated to applications like the luminescent concentrator. In this paper we report stability experiments on luminescent concentrator plates, aged under continuous white light illumination, outdoor conditions and high intensity monochromatic illumination. The results show that the lifetime strongly depends on the organic luminescent dye in the plate. The best materials exhibit an initial decrease in performance of about 20% and then remain more or less stable. It is shown that the degradation is not caused by UV illumination.

  11. Luminescence properties of tetravalent uranium in aqueous solution

    International Nuclear Information System (INIS)

    Kirishima, A.; Kimura, T.; Nagaishi, R.; Tochiyama, O.

    2004-01-01

    The luminescence spectra of U 4+ in aqueous solutions were observed in the UV-VIS region at ambient and liquid nitrogen temperatures. The excitation spectrum indicates that the luminescence is arising from the deexcitation of a 5f electron at the 1 S 0 level and no other emissions of U 4+ in aqueous solutions were detected for other f-f transitions. All the luminescence peaks were assigned to the transitions from 1 S 0 to lower 5f levels. To estimate the luminescence lifetime, luminescence decay curves were measured using time-resolved laser-induced fluorescence spectroscopy. At room temperature, the decay curve indicated that the lifetime was shorter than 20 ns. On the other hand, the frozen sample of U 4+ in aqueous solution at liquid nitrogen temperature showed the same emission spectrum as at room temperature and its lifetime was 149 ns in H 2 O system and 198 ns in D 2 O system. The longer lifetime at liquid nitrogen temperature made it possible to measure the spectrum of U 4+ at the concentration as low as 10 -6 M. The difference in the anion species (ClO 4 - , Cl - , SO 4 2- ) affected the structure of the emission spectrum to some extent. (orig.)

  12. The nature of unusual luminescence in natural calcite, CaCO3

    Energy Technology Data Exchange (ETDEWEB)

    Gaft, M.; Nagli, L.; Panczer, G.; Waychunas, G.; Porat, N.

    2008-11-01

    The unusual luminescence of particular varieties of natural pink calcite (CaCO{sub 3}) samples was studied by laser-induced time-resolved luminescence spectroscopy at different temperatures. The luminescence is characterized by intense blue emission under short-wave UV lamp excitation with an extremely long decay time, accompanied by pink-orange luminescence under long wave UV excitation. Our investigation included optical absorption, natural thermostimulated luminescence (NTL) and Laser-Induced Breakdown Spectroscopy (LIBS) studies. Two luminescence centers were detected: a narrow violet band, with {lambda}{sub max} = 412 nm, {Delta} = 45 nm, two decay components of {tau}{sub 1} = 5 ns and {tau}{sub 2} = 7.2 ms, accompanied by very long afterglow, and an orange emission band with {lambda}{sub max} = 595 nm, {Delta} = 90 nm and {tau} = 5 ns. Both luminescence centers are thermally unstable with the blue emission disappearing after heating at 500 C, and the orange emission disappearing after heating at different temperatures starting from 230 C, although sometimes it is stable up to 500 C in different samples. Both centers have spectral-kinetic properties very unusual for mineral luminescence, which in combination with extremely low impurity concentrations, prevent their identification with specific impurity related emission. The most likely explanation of these observations may be the presence of radiation-induced luminescence centers. The long violet afterglow is evidently connected with trapped charge carrier liberation, with their subsequent migration through the valence band and ultimate recombination with a radiation-induced center responsible for the unusual violet luminescence.

  13. Luminescence of YAB:Er single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Foeldvari, I.; Beregi, E.; Watterich, A. [Research Institute for Solid State Physics and Optics, HAS, Konkoly-Thege u. 29-33, 1121 Budapest (Hungary); Solarz, P.; Dominiak-Dzik, G.; Ryba-Romanowski, W. [Institute of Low Temperature and Structure Research, PAS, Okolna 2, 50422 Wroclaw (Poland)

    2007-03-15

    Luminescence spectra of YAB:Er crystals were studied in the ultraviolet-visible region and in the 10-300 K temperature range. The dominant Er{sup 3+}-emission belonged to the {sup 4}S{sub 3/2} {yields} {sup 4}I{sub 15/2} transition (18000-18500 cm{sup -1}). Its Stark components were assigned and found to be consistent with those derived from the absorption spectra. The lifetime of the luminescence was determined as a function of temperature and Er-concentration, and the decay kinetics was analyzed. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  14. Silicon: electrochemistry and luminescence

    NARCIS (Netherlands)

    Kooij, Ernst Stefan

    1997-01-01

    The electrochemistry of crystalline and porous silicon and the luminescence from porous silicon has been studied. One chapter deals with a model for the anodic dissolution of silicon in HF solution. In following chapters both the electrochemistry and various ways of generating visible

  15. Luminescence study of spodumene

    International Nuclear Information System (INIS)

    Isotani, S.; Fujii, A.T.; Antonini, R.; Pontuschka, W.M.; Rabani, S.R.; Furtado, W.W.

    1990-02-01

    A comparative study is made of the luminescence of five kinds of spodumene from Minas Gerais, Brazil, studied previously by optical absorption spectroscopy. Natural gemstones are used which, in the course of the experiments, were irradiated with X-rays. (L.C.) [pt

  16. Luminescent properties of Al2O3: Tb powders

    International Nuclear Information System (INIS)

    Esparza G, A.E.; Garcia, M.; Falcony, C.; Azorin N, J.

    2000-01-01

    In this work the photo luminescent and cathode luminescent characteristics of aluminium oxide (Al 2 O 3 ) powders impurified with terbium (Tb) were studied for their use in dosimetry. The optical, structural, morphological characteristics of the powders as function of variation in the impurity concentration and the annealing temperature will be presented. As regards the optical properties of powders (photoluminescence and cathode luminescence) it was observed a characteristic emission associated with radiative transitions between electron energy levels of terbium, the spectra associated with this emission consists of several peaks associated with such transitions. In the structural and morphological characterization (X-ray diffraction and scanning electron microscopy) it was appreciated that in accordance the annealing temperature of powders is augmented it is evident the apparition of certain crystalline phases. The results show that this is a promissory material for radiation dosimetry. (Author)

  17. Assessment of Unusual Gigantic Jets observed during the Monsoon season: First observations from Indian Subcontinent.

    Science.gov (United States)

    Singh, Rajesh; Maurya, Ajeet K; Chanrion, Olivier; Neubert, Torsten; Cummer, Steven A; Mlynarczyk, Janusz; Cohen, Morris B; Siingh, Devendraa; Kumar, Sushil

    2017-11-27

    Gigantic Jets are electric discharges from thunderstorm cloud tops to the bottom of ionosphere at ~90 km altitude and electrically connect the troposphere and lower ionosphere. Since their first report in 2002, sporadic observations have been reported from ground and space based observations. Here we report first observations of Gigantic Jets in Indian subcontinent over the Indo-Gangetic plains during the monsoon season. Two storms each produced two jets with characteristics not documented so far. Jets propagated ~37 km up remarkably in ~5 ms with velocity of ~7.4 × 10 6 ms -1 and disappeared within ~40-80 ms, which is faster compared to jets reported earlier. The electromagnetic signatures show that they are of negative polarity, transporting net negative charge of ~17-23 C to the lower ionosphere. One jet had an unusual form observed for the first time, which emerged from the leading edge of a slowly drifting complex convective cloud close to the highest regions at ~17 km altitude. A horizontal displacement of ~10 km developed at ~50 km altitude before connecting to the lower ionosphere. Modeling of these Gigantic jets suggests that Gigantic Jets may bend when initiated at the edge of clouds with misaligned vertical charge distribution.

  18. Oxygen hypothesis of polar gigantism not supported by performance of Antarctic pycnogonids in hypoxia.

    Science.gov (United States)

    Woods, H Arthur; Moran, Amy L; Arango, Claudia P; Mullen, Lindy; Shields, Chris

    2009-03-22

    Compared to temperate and tropical relatives, some high-latitude marine species are large-bodied, a phenomenon known as polar gigantism. A leading hypothesis on the physiological basis of gigantism posits that, in polar water, high oxygen availability coupled to low metabolic rates relieves constraints on oxygen transport and allows the evolution of large body size. Here, we test the oxygen hypothesis using Antarctic pycnogonids, which have been evolving in very cold conditions (-1.8-0 degrees C) for several million years and contain spectacular examples of gigantism. Pycnogonids from 12 species, spanning three orders of magnitude in body mass, were collected from McMurdo Sound, Antarctica. Individual sea spiders were forced into activity and their performance was measured at different experimental levels of dissolved oxygen (DO). The oxygen hypothesis predicts that, all else being equal, large pycnogonids should perform disproportionately poorly in hypoxia, an outcome that would appear as a statistically significant interaction between body size and oxygen level. In fact, although we found large effects of DO on performance, and substantial interspecific variability in oxygen sensitivity, there was no evidence for sizexDO interactions. These data do not support the oxygen hypothesis of Antarctic pycnogonid gigantism and suggest that explanations must be sought in other ecological or evolutionary processes.

  19. Gigantic self-confined pahoehoe inflated lava flows in Argentina

    Science.gov (United States)

    Pasquare', G.; Bistacchi, A.

    2007-05-01

    The largest lava flows on Earth are pahoehoe basalts emplaced by inflation, a process which can change lava lobes initially a few decimetres thick into large lava sheets several metres thick. Inflation involves the initial formation of a thin, solidified, viscoelastic crust, under which liquid lava is continually added. This thermally efficient endogenous growth process explains the spread of huge volumes of lava over large, almost flat areas, as in the sheet flows which characterise the distal portions of Hawaiian volcanoes or some continental flood basalt provinces. Long, narrow, inflated pahoehoe flows have occasionally been described, either emplaced along pre-existing river channels or confined within topographic barriers. In this contribution we present previously unknown inflated pahoehoe lava flows following very long, narrow pathways over an almost flat surface, with no topographic confinement. Lava, which erupted in Late Quaternary times from the eastern tip of a 60 km long volcanic fissure in Argentina, formed several discrete flows extending as far as 180 km from the source. This fissure was characterized by a long-lasting and complex activity. Alkali-basaltic lava flows were emitted at the two extremities of the fissure system. In the intermediate section of the fissure, the Payun Matru, a great trachitic composite volcano, developed, giving rise to a large caldera which produced large pyroclastic flows. Alkali-basalts predate and postdate the trachitic activity, in fact at the end of the trachitic activity, new basaltic lava flows (mainly aa) were emitted from both ends of the fissure. We studied in details the youngest of the gigantic flows (Pampas Onduladas lava flow), which progressively develops through differing thermally-efficient flow mechanisms. The flow created a large shield volcanic structure at the eastern tip of the E-W fissure and spread to the E forming a very large and thick inflated pahoehoe sheet flow. Leaving the flanks of the

  20. Photo and cathode luminescence emission in oxide silicium films implanted with silicium; Emision de foto y catodoluminiscencia en peliculas de oxido de silicio termico implantadas con silicio

    Energy Technology Data Exchange (ETDEWEB)

    Flores, F; Aceves, M. [Instituto Nacional de Astrofisica Optica y Electronica, Mexico, D.F. (Mexico); Carrillo, J. [Benemrita Universidad Autonoma de Puebla, Puebla (Mexico); Dominguez, C. [Universida Autonoma de Barcelona, Barcelona (Spain); Falcony, C. [Instituto Politecnico Nacional, Mexico, D.F. (Mexico)

    2001-10-01

    We studied the photo and cathodoluminescence of Silicon Rich Oxides (SRO) obtained by ion implant of Si in thermal oxides. Doses of 10{sup 1}6 cm{sup -}2 (low dose) and 10{sup 1}7 cm{sup -}2 (high dose) and implant energy of 150 keV were used. The films were annealed for 30, 60 and 180 minutes in nitrogen at 1100 Celsius degrees. The spectra show photo and cathodoluminescence emission in the visible range, the bands in the spectra change with the conditions of ion implant and annealing. The films without thermal treatment in both dose present photoluminescence bands around 1.9 eV (band B) and 2.4 eV (band C). With the thermal treatments, the band B disappears. In the case of the films with low dose, the band C shows a blue shift and a decrease in intensity. The high dose films have a band centered in 1.7 eV (band A) that increases its intensity with annealings. The cathodoluminescence bands in all the cases are in 2.7 eV (band D) and they present changes with the thermal treatments that it seems they depend on the variation in the implant parameters. [Spanish] Se estudian las propiedades de foto y la catodoluminiscencia de peliculas de oxidos de silicio ricos en Si (Silicon Rich Oxide SRO) obtenidas por implantacion ionica de Si en oxidos termicos. Se usaron dosis de 10{sup 1}6 cm{sup -}2 (dosis baja) y 10{sup 1}7 cm{sup -}2 (dosis alta) y energia de implantacion de 150 keV. Las peliculas se sometieron a tratamientos termicos por 30, 60 y 180 minutos en nitrogeno de 1100 grados centigrados. Se encontro emision foto y catodoluminiscente en el rango visible, las bandas en los espectros cambian con las condiciones de implantacion ionica y con los tratamientos termicos. Las peliculas sin tratamiento termico en ambas dosis presentan bandas de fotoluminiscencia alrededor de 1.9 eV (banda B) y 2.4 eV (banda C). Con los tratamientos termicos, la banda B desaparece. En el caso de las peliculas con dosis baja, la banda C muestra un corrimiento hacia el azul junto con una

  1. New luminescent materials and filters for Luminescent Solar Concentrators

    OpenAIRE

    De Boer, D.K.G.; Ronda, C.R.; Keur, W.C.; Meijerink, A.

    2012-01-01

    In a Luminescent Solar Concentrator (LSC), short-wavelength light isconverted by a luminescent material into long-wavelength light, which is guided towards a photovoltaic cell. In principle, an LSC allows for high concentration, but in practice this is prevented by lossmechanisms like limited sunlight absorption, limited quantum efficiency and high self absorption. To tackle these problems, a suitable luminescent material is needed. Another important loss mechanism is the escape of luminescen...

  2. Intrinsic luminescence of YAlO.sub.3./sub. perovskites

    Czech Academy of Sciences Publication Activity Database

    Zorenko, Y.; Voloshinovskii, A.; Gorbenko, V.; Zorenko, T.; Nikl, Martin; Nejezchleb, K.

    2007-01-01

    Roč. 4, č. 3 (2007), s. 963-967 ISSN 1862-6351 R&D Projects: GA ČR GA202/05/2471 Grant - others:INTAS(XE) 04-78-7083 Institutional research plan: CEZ:AV0Z10100521 Keywords : intrinsic emission * perovskites * luminescence * exciton Subject RIV: BM - Solid Matter Physics ; Magnetism

  3. Comparable luminescence investigation of the La1-xEuxVO4 solid solutions synthesized by two different methods

    OpenAIRE

    Chukova, O. V.; Nedilko, S. G.; Scherbatskii, V.; Nedilko, S. A.; Voytenko, T.

    2012-01-01

    Luminescence properties of the series of the La1-xEuxVO4 solid solutions were investigated. The samples were synthesized by the solid state and co-precipitation methods. Luminescence spectra of the investigated samples consist of weak wide non-structural band of the matrix emission and narrow spectral lines caused by inner f-f electron transitions in the impurity Eu3+ ions. Dependences of the structure, peak positions and intensity of luminescence on the composition, samples tempe...

  4. Quantitative luminescence imaging system

    Science.gov (United States)

    Erwin, D.N.; Kiel, J.L.; Batishko, C.R.; Stahl, K.A.

    1990-08-14

    The QLIS images and quantifies low-level chemiluminescent reactions in an electromagnetic field. It is capable of real time nonperturbing measurement and simultaneous recording of many biochemical and chemical reactions such as luminescent immunoassays or enzyme assays. The system comprises image transfer optics, a low-light level digitizing camera with image intensifying microchannel plates, an image process or, and a control computer. The image transfer optics may be a fiber image guide with a bend, or a microscope, to take the light outside of the RF field. Output of the camera is transformed into a localized rate of cumulative digitalized data or enhanced video display or hard-copy images. The system may be used as a luminescent microdosimetry device for radiofrequency or microwave radiation, as a thermal dosimeter, or in the dosimetry of ultra-sound (sonoluminescence) or ionizing radiation. It provides a near-real-time system capable of measuring the extremely low light levels from luminescent reactions in electromagnetic fields in the areas of chemiluminescence assays and thermal microdosimetry, and is capable of near-real-time imaging of the sample to allow spatial distribution analysis of the reaction. It can be used to instrument three distinctly different irradiation configurations, comprising (1) RF waveguide irradiation of a small Petri-dish-shaped sample cell, (2) RF irradiation of samples in a microscope for the microscopic imaging and measurement, and (3) RF irradiation of small to human body-sized samples in an anechoic chamber. 22 figs.

  5. Quantitative luminescence imaging system

    Science.gov (United States)

    Erwin, David N.; Kiel, Johnathan L.; Batishko, Charles R.; Stahl, Kurt A.

    1990-01-01

    The QLIS images and quantifies low-level chemiluminescent reactions in an electromagnetic field. It is capable of real time nonperturbing measurement and simultaneous recording of many biochemical and chemical reactions such as luminescent immunoassays or enzyme assays. The system comprises image transfer optics, a low-light level digitizing camera with image intensifying microchannel plates, an image process or, and a control computer. The image transfer optics may be a fiber image guide with a bend, or a microscope, to take the light outside of the RF field. Output of the camera is transformed into a localized rate of cumulative digitalized data or enhanced video display or hard-copy images. The system may be used as a luminescent microdosimetry device for radiofrequency or microwave radiation, as a thermal dosimeter, or in the dosimetry of ultra-sound (sonoluminescence) or ionizing radiation. It provides a near-real-time system capable of measuring the extremely low light levels from luminescent reactions in electromagnetic fields in the areas of chemiluminescence assays and thermal microdosimetry, and is capable of near-real-time imaging of the sample to allow spatial distribution analysis of the reaction. It can be used to instrument three distinctly different irradiation configurations, comprising (1) RF waveguide irradiation of a small Petri-dish-shaped sample cell, (2) RF irradiation of samples in a microscope for the microscopie imaging and measurement, and (3) RF irradiation of small to human body-sized samples in an anechoic chamber.

  6. Luminescent solar concentrator

    Directory of Open Access Journals (Sweden)

    Tugce Tosun

    2015-07-01

    Full Text Available Luminescent solar concentrator (LSC is a device that has luminescent molecules embedding or topping polymeric or glass waveguide to generate electricity from sunlight with a photovoltaic cell attachment. LSCs can be employed both in small and large scale projects, independent on the direction or angle of the surface with respect to the sun, promising more freedom for integration in urban environments compared to the traditional PV systems. The aim of the SEB&C PDEng project is to investigate the applicability of this innovative technology in the built environment and to bridge the gap of knowledge linking societal, design and technological aspects. The final goal is to exhibit potential application concepts of LSC developed by co-creative methods at SPARK campus which is a hub for open innovation in built environment. Necessity of a paradigm shift towards sustainable and smart cities came into being due to the significant increase in energy demand of the buildings. The challenge is to increase renewable sources in the energy mix while designing aesthetic environments. Thus, building integrated renewable energy technologies represent a great opportunity to help overcome this current challenge. Smart energy, energy efficiency and use of renewable sources are key aspects to be considered nowadays and many innovative technologies need further exploitation to be commercially viable, such as luminescent solar concentrator.

  7. Luminescent Metal Nanoclusters for Potential Chemosensor Applications

    Directory of Open Access Journals (Sweden)

    Muthaiah Shellaiah

    2017-12-01

    Full Text Available Studies of metal nanocluster (M-NCs-based sensors for specific analyte detection have achieved significant progress in recent decades. Ultra-small-size (<2 nm M-NCs consist of several to a few hundred metal atoms and exhibit extraordinary physical and chemical properties. Similar to organic molecules, M-NCs display absorption and emission properties via electronic transitions between energy levels upon interaction with light. As such, researchers tend to apply M-NCs in diverse fields, such as in chemosensors, biological imaging, catalysis, and environmental and electronic devices. Chemo- and bio-sensory uses have been extensively explored with luminescent NCs of Au, Ag, Cu, and Pt as potential sensory materials. Luminescent bi-metallic NCs, such as Au-Ag, Au-Cu, Au-Pd, and Au-Pt have also been used as probes in chemosensory investigations. Both metallic and bi-metallic NCs have been utilized to detect various analytes, such as metal ions, anions, biomolecules, proteins, acidity or alkalinity of a solution (pH, and nucleic acids, at diverse detection ranges and limits. In this review, we have summarized the chemosensory applications of luminescent M-NCs and bi-metallic NCs.

  8. Ion beam induced luminescence of materials

    CERN Document Server

    Brooks, R

    2001-01-01

    luminescence dead zone at the domain walls. Neodymium-yttrium-aluminium garnet (Nd:YAG) was examined and the spectra measured as a function of temperature to show the evolution of intensity of the narrow line emission from the Nd rare earth. Shifts and changes in the intrinsic UV band in the YAG material were also apparent. Thin films of alumina grown on silica on a silicon substrate, along with some that contained copper nanoclusters were also examined. TRIM software was used to model the rate of excitation within the different layers of the material for the various implant energies and to identify the source of the luminescence profile observed in each case. Evidence of thin film interference fringes was apparent in the spectra by fringe patterns modulated onto the luminescence signal as a function of wavelength and film thickness. Analysis of an alkali feldspar material using IBL, and combined with work done using RL and CL experiments, showed a shift towards lower wavelengths of the main red/IR band with ...

  9. Luminescent properties of aluminum hydride

    Energy Technology Data Exchange (ETDEWEB)

    Baraban, A.P.; Gabis, I.E.; Dmitriev, V.A. [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation); Dobrotvorskii, M.A., E-mail: mstislavd@gmail.com [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation); Kuznetsov, V.G. [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation); Matveeva, O.P. [National Mineral Resources University, Saint Petersburg 199106 (Russian Federation); Titov, S.A. [Petersburg State University of Railway Transport, Saint-Petersburg 190031 (Russian Federation); Voyt, A.P.; Elets, D.I. [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation)

    2015-10-15

    We studied cathodoluminescence and photoluminescence of α-AlH{sub 3}– a likely candidate for use as possible hydrogen carrier in hydrogen-fueled vehicles. Luminescence properties of original α-AlH{sub 3} and α-AlH{sub 3} irradiated with ultraviolet were compared. The latter procedure leads to activation of thermal decomposition of α-AlH{sub 3} and thus has a practical implementation. We showed that the original and UV-modified aluminum hydride contain luminescence centers ‐ structural defects of the same type, presumably hydrogen vacancies, characterized by a single set of characteristic bands of radiation. The observed luminescence is the result of radiative intracenter relaxation of the luminescence center (hydrogen vacancy) excited by electrons or photons, and its intensity is defined by the concentration of vacancies, and the area of their possible excitation. UV-activation of the dehydrogenation process of aluminum hydride leads to changes in the spatial distribution of the luminescence centers. For short times of exposure their concentration increases mainly in the surface regions of the crystals. At high exposures, this process extends to the bulk of the aluminum hydride and ends with a decrease in concentration of luminescence centers in the surface region. - Highlights: • Aluminum hydride contains hydrogen vacancies which serve as luminescence centers. • The luminescence is the result of radiative relaxation of excited centers. • Hydride UV-irradiation alters distribution and concentration of luminescence centers.

  10. Luminescence of the octahedral uranate group

    International Nuclear Information System (INIS)

    Hair, J.Th.W. de

    1976-01-01

    The luminescence characteristics of the octahedral uranate group are described. Bands in the excitation spectra are assigned to charge transfer transitions from ligand m.o.'s to the 5f state of the hexavalent uranium ion. The emission is a parity-forbidden electric dipole transition 5f→tsub(1u) which is vibronically allowed by coupling with the ungerade vibrational modes of the UO 6- 6 octahedron. This is confirmed by the dependence of the decay time on temperature. Attention is paid to the difference between the vibrational patterns in the emission of the UO 6- 6 and the UO 2+ 2 groups. From measurements as a function of the uranium concentration it is deduced that energy transfer between uranate groups mutually proceeds over some 25 A. This explains why the vibrational pattern in the emission spectra depends on the uranium concentration. (Auth.)

  11. Thermal luminescence spectroscopy chemical imaging sensor.

    Science.gov (United States)

    Carrieri, Arthur H; Buican, Tudor N; Roese, Erik S; Sutter, James; Samuels, Alan C

    2012-10-01

    The authors present a pseudo-active chemical imaging sensor model embodying irradiative transient heating, temperature nonequilibrium thermal luminescence spectroscopy, differential hyperspectral imaging, and artificial neural network technologies integrated together. We elaborate on various optimizations, simulations, and animations of the integrated sensor design and apply it to the terrestrial chemical contamination problem, where the interstitial contaminant compounds of detection interest (analytes) comprise liquid chemical warfare agents, their various derivative condensed phase compounds, and other material of a life-threatening nature. The sensor must measure and process a dynamic pattern of absorptive-emissive middle infrared molecular signature spectra of subject analytes to perform its chemical imaging and standoff detection functions successfully.

  12. Luminescent properties of praseodymium in some fluorides

    International Nuclear Information System (INIS)

    Potapov, A.S.; Rodnyj, P.A.; Mikhrin, S.B.; Magunov, I.R.

    2005-01-01

    Influence of diverse factors on efficiency of the Pr 3+ cascade emission in BaF 2 : Pr and SrAlF 5 : Pr. The effect of the environment of the luminescence center on the mutual position of the lowest 5d and the 4f level 1 S 0 of Pr 3+ ion is considered. PrF 3 clustering in BaF 2 is observed at a high praseodymium concentration. The promising potential of magnesium as a charge compensator for praseodymium in SrAlF 5 is demonstrated [ru

  13. A gigantic nothosaur (Reptilia: Sauropterygia) from the Middle Triassic of SW China and its implication for the Triassic biotic recovery

    Science.gov (United States)

    Liu, Jun; Hu, Shi-Xue; Rieppel, Olivier; Jiang, Da-Yong; Benton, Michael J.; Kelley, Neil P.; Aitchison, Jonathan C.; Zhou, Chang-Yong; Wen, Wen; Huang, Jin-Yuan; Xie, Tao; Lv, Tao

    2014-11-01

    The presence of gigantic apex predators in the eastern Panthalassic and western Tethyan oceans suggests that complex ecosystems in the sea had become re-established in these regions at least by the early Middle Triassic, after the Permian-Triassic mass extinction (PTME). However, it is not clear whether oceanic ecosystem recovery from the PTME was globally synchronous because of the apparent lack of such predators in the eastern Tethyan/western Panthalassic region prior to the Late Triassic. Here we report a gigantic nothosaur from the lower Middle Triassic of Luoping in southwest China (eastern Tethyan ocean), which possesses the largest known lower jaw among Triassic sauropterygians. Phylogenetic analysis suggests parallel evolution of gigantism in Triassic sauropterygians. Discovery of this gigantic apex predator, together with associated diverse marine reptiles and the complex food web, indicates global recovery of shallow marine ecosystems from PTME by the early Middle Triassic.

  14. New luminescent materials and filters for Luminescent Solar Concentrators

    NARCIS (Netherlands)

    De Boer, D.K.G.; Ronda, C.R.; Keur, W.C.; Meijerink, A.

    2012-01-01

    In a Luminescent Solar Concentrator (LSC), short-wavelength light isconverted by a luminescent material into long-wavelength light, which is guided towards a photovoltaic cell. In principle, an LSC allows for high concentration, but in practice this is prevented by lossmechanisms like limited

  15. Luminescent chemical sensing, biosensing, and screening using upconverting nanoparticles.

    Science.gov (United States)

    Achatz, Daniela E; Ali, Reham; Wolfbeis, Otto S

    2011-01-01

    Upconverting nanoparticles (UCNPs) display the unique property of converting near-infrared light (with wavelengths of typically 800-1,000 nm) into visible luminescence. Following a short introduction into the mechanisms leading to the effect, the main classes of materials used are discussed. We then review the state of the art of using UCNPs: (1) to label biomolecules such as antibodies and (synthetic) oligomers for use in affinity assay and flow assays; (2) to act as nanolamps whose emission intensity is modulated by chemical indicators, thus leading to a novel kind of chemical sensors; and (3), to act as donors in luminescence resonance energy transfer in chemical sensors and biosensors.

  16. Development of a battery-operated portable synchronous luminescence spectrofluorometer

    Energy Technology Data Exchange (ETDEWEB)

    Alarie, J.P.; Vo-Dinh, T.; Miller, G.; Ericson, M.N.; Maddox, S.R.; Watts, W. (Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6101 (United States)); Eastwood, D.; Lidberg, R.; Dominguez, M. (Lockheed Environmental Systems and Technologies Company, Las Vegas, Nevada 89119 (United States))

    1993-09-01

    A battery-operated portable synchronous luminescence spectrofluorometer was developed for on-site analysis of groundwater or hazardous waste sites. The instrument is capable of either emission, excitation, or synchronous fluorescence measurements. The instrument is suited for trace analysis of important pollutants such as polyaromatic hydrocarbons, creosotes, and polychlorinated biphenyls in complex mixtures. The ability to perform synchronous luminescence measurements on these samples can reduce the complexity of fluorescence spectra and help in rapid field site characterization. A description of the instrumental components is given and an evaluation of the instrument using anthracene and several oil samples is provided to illustrate the usefulness of the instrument.

  17. Luminescent Lanthanide Reporters for High-Sensitivity Novel Bioassays

    Energy Technology Data Exchange (ETDEWEB)

    Anstey, Mitchell R. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Fruetel, Julia A. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Foster, Michael E. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Hayden, Carl C. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Buckley, Heather L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Arnold, John [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2013-09-01

    Biological imaging and assay technologies rely on fluorescent organic dyes as reporters for a number of interesting targets and processes. However, limitations of organic dyes such as small Stokes shifts, spectral overlap of emission signals with native biological fluorescence background, and photobleaching have all inhibited the development of highly sensitive assays. To overcome the limitations of organic dyes for bioassays, we propose to develop lanthanide-based luminescent dyes and demonstrate them for molecular reporting applications. This relatively new family of dyes was selected for their attractive spectral and chemical properties. Luminescence is imparted by the lanthanide atom and allows for relatively simple chemical structures that can be tailored to the application. The photophysical properties offer unique features such as narrow and non-overlapping emission bands, long luminescent lifetimes, and long wavelength emission, which enable significant sensitivity improvements over organic dyes through spectral and temporal gating of the luminescent signal.Growth in this field has been hindered due to the necessary advanced synthetic chemistry techniques and access to experts in biological assay development. Our strategy for the development of a new lanthanide-based fluorescent reporter system is based on chelation of the lanthanide metal center using absorbing chromophores. Our first strategy involves "Click" chemistry to develop 3-fold symmetric chelators and the other involves use of a new class of tetrapyrrole ligands called corroles. This two-pronged approach is geared towards the optimization of chromophores to enhance light output.

  18. Luminescence dating of Netherland's sediments

    NARCIS (Netherlands)

    Wallinga, J.; Davids, F.; Dijkmans, J.W.A.

    2007-01-01

    Over the last decades luminescence dating techniques have been developed that allow earth scientists to determine the time of deposition of sediments. In this contribution we revity: 1) the development of the methodology, 2) tests of the reliability of luminescence dating on Netherlands' sediments;

  19. Luminescence dating of Netherlands’ sediments

    NARCIS (Netherlands)

    Wallinga, J.; Davids, F.; Dijkmans, J.W.A.

    2007-01-01

    Over the last decades luminescence dating techniques have been developed that allow earth scientists to determine the time of deposition of sediments. In this contribution we review: 1) the development of the methodology; 2) tests of the reliability of luminescence dating on Netherlands’ sediments;

  20. Luminescence studies of semiconductor electrodes

    NARCIS (Netherlands)

    Kelly, J.J.; Kooij, Ernst S.; Meulenkamp, E.A.

    1999-01-01

    In this paper we review our recent results of in-situ luminescence studies of semiconductor electrodes. Three classes of materials are considered: single crystal compound semiconductors, porous silicon and semiconducting oxides doped with luminescent ions. We show how photoluminescence (PL) and

  1. Synthesis and luminescence properties of europium and terbium complexes with pyridine- or bipyridine-linked oligothiophene ligand

    International Nuclear Information System (INIS)

    Liu Ping; Huang Mingsheng; Pan Wanzhang; Zhang Yamin; Hu Jianhua; Deng Wenji

    2006-01-01

    With an aim to develop novel luminescence materials, europium and terbium complexes of 2,5-(2-thiophene)-pyridine (TPY) and 5,5'-bis(5-(2,2'-bithiophene))-2,2'-bipyridine (B2TBPY) were synthesized, and their luminescence properties studied. The complexes exhibit ligand-sensitized emission, which is typical of Eu(III) and Tb(III) ions

  2. Mixoma gigante de átrio esquerdo Giant left atrial myxoma

    Directory of Open Access Journals (Sweden)

    Juan Francisco Muñoz Cruz

    1998-11-01

    Full Text Available Homem de 65 anos, portador de miocardiopatia dilatada e hipertensão arterial de longa data, com antecedentes de acidente vascular cerebral e que, ao ecocardiograma, apresentou mixoma gigante de átrio esquerdo.A 65 year-old man with dilated cardiomiopathy and long history of high blood pressure and a previous cerebral vascular accident had a giant left atrial myxoma as an echocardiographic finding.

  3. Unilateral delayed opercularization in a case of Sotos' syndrome (cerebral gigantism)

    Energy Technology Data Exchange (ETDEWEB)

    Barth, P.G.; Vlasveld, L.; Valk, J.

    1980-08-01

    A case of Sotos' syndrome (cerebral gigantism) is described. Pneumencephalography, performed at the age of 15 days, revealed abnormal separation of the opercula on the right. By comparing the contours with developmental anatomical features of this area it agreed with a foetal development of 24 weeks gestational age. Bilateral carotid angiography was normal. CT showed normal development of the Sylvian area at the age of 27 months.

  4. Cordoma sacrococcígeo gigante - Relato de caso=Giant sacrococcygeal chordoma - Case report

    OpenAIRE

    Ghezzi, Tiago Leal; Pereira Filho, Gustavo Azambuja; Cigerza, Giuliano Chemale; Cruz, Dennis Baroni; Pêgas, Karla Lais; Corleta, Oly Campos

    2009-01-01

    Cordoma sacrococcígeo é uma neoplasia maligna rara que se origina de remanescentes da notocorda. A localização crítica, comportamento localmente agressivo, reconhecida resistência à radioterapia, significativa morbimortalidade cirúrgica e elevada taxa de recidiva tornam seu tratamento um desafio. Descrevemos um caso de cordoma sacrococcígeo gigante. Sacrococcygeal chordoma is a rare malignant neoplasm arised from the remmants of the notochord. The critical localization, locally aggressive ...

  5. Cordoma Sacrococcígeo gigante: relato de caso Giant Sacrococcygeal chordoma: case report

    OpenAIRE

    Tiago Leal Ghezzi; Gustavo Pereira Filho; Giuliano Chemale Cigerza; Oly Campos Corleta

    2009-01-01

    Cordoma sacrococcígeo é uma neoplasia maligna rara que se origina de remanescentes da notocorda. A localização crítica, comportamento localmente agressivo, reconhecida resistência à radioterapia, significativa morbimortalidade cirúrgica e elevada taxa de recidiva tornam seu tratamento um desafio. Descrevemos um caso de cordoma sacrococcígeo gigante.Sacrococcygeal chordoma is a rare malignant neoplasm arised from the remmants of the notochord. The critical localization, locally aggressive beha...

  6. Fiber-coupled Luminescence Dosimetry in Therapeutic and Diagnostic Radiology

    DEFF Research Database (Denmark)

    Andersen, Claus Erik

    2011-01-01

    . Some crystalline phosphors, such as carbon-doped aluminium oxide (Al2O3:C) have the ability to store charge produced in the crystal during irradiation. The stored charge may later be released by fiber-guided laser light under emission of so-called optically stimulated luminescence (OSL). The OSL signal......Fiber-coupled luminescence dosimetry is an emerging technology with several potentially attractive features of relevance for uses in therapeutic and diagnostic radiology: direct water equivalence (i.e. no significant perturbation of the radiation field in a water phantom or a patient), sub......-mm detector size, high dynamic range (below a mGy to several Gy), microsecond time resolution, and absence of electrical wires or other electronics in the dosimeter probe head. Fiber-coupled luminescence dosimetry systems typically consist of one or more small samples of phosphor, e.g. a mg of plastic...

  7. Optical and luminescence properties of zinc oxide (Review)

    Science.gov (United States)

    Rodnyi, P. A.; Khodyuk, I. V.

    2011-11-01

    We generalize and systematize basic experimental data on optical and luminescence properties of ZnO single crystals, thin films, powders, ceramics, and nanocrystals. We consider and study mechanisms by which two main emission bands occur, a short-wavelength band near the fundamental absorption edge and a broad long-wavelength band, the maximum of which usually lies in the green spectral range. We determine a relationship between the two luminescence bands and study in detail the possibility of controlling the characteristics of ZnO by varying the maximum position of the short-wavelength band. We show that the optical and luminescence characteristics of ZnO largely depend on the choice of the corresponding impurity and the parameters of the synthesis and subsequent treatment of the sample. Prospects for using zinc oxide as a scintillator material are discussed. Additionally, we consider experimental results that are of principal interest for practice.

  8. Optically stimulated luminescence dosimetry with gypsum wallboard (drywall).

    Science.gov (United States)

    Thompson, Jeroen W; Burdette, Kevin E; Inrig, Elizabeth L; Dewitt, Regina; Mistry, Rajesh; Rink, W Jack; Boreham, Douglas R

    2010-09-01

    Gypsum wallboard (drywall) represents an attractive target for retrospective dosimetry by optically stimulated luminescence (OSL) in the event of a radiological accident or malicious use of nuclear material. In this study, wallboard is shown to display a radiation-induced luminescence signal (RIS) as well as a natural background signal (NS), which is comparable in intensity to the RIS. Excitation and emission spectra show that maximum luminescence intensity is obtained for stimulation with blue light-emitting diodes (470 nm) and for detection in the ultraviolet region (290-370 nm). It is necessary to decrease the optical stimulation power dramatically in order to adequately separate the RIS from the interfering background signal. The necessary protocols are developed for accurately measuring the absorbed dose as low as 500 mGy and demonstrate that the RIS decays logarithmically with storage time, with complete erasure expected within 1-4 d.

  9. Luminescence and photosensitivity of PbI2 crystals

    International Nuclear Information System (INIS)

    Novosad, S.S.; Novosad, I.S.; Matviishin, I.M.

    2002-01-01

    One studied effect of temperature treatment and storage conditions on spectra features of PbI 2 crystals grown by the Bridgman-Stockbarger method from salt additionally purified by directed crystallization. Spectra of X-ray luminescence, photoluminescence and thermostimulated luminescence were investigated within 85-295 K temperature range under stationary X-ray excitation and emission of N 2 -laser. One studied photoelectret properties of those crystals under 85 K. Luminescence of PbI 2 crystals with maximum within 595 nm region observed following their thermal annealing under 475-495 K temperature and typical for near-the-surface section of specimens may be caused by oxygen-containing centres [ru

  10. A luminescent nisin biosensor

    Science.gov (United States)

    Immonen, Nina; Karp, Matti

    2006-02-01

    Nisin is a lantibiotic, an antibacterial peptide produced by certain Lactococcus lactis strains that kills or inhibits the growth of other bacteria. Nisin is widely used as a food preservative, and its long-time use suggests that it can be generally regarded as safe. We have developed a method for determining the amount of nisin in food samples that is based on luminescent biosensor bacteria. Bacterial luciferase operon luxABCDE was inserted into plasmid pNZ8048, and the construct was transformed by electroporation into Lc. lactis strain NZ9800, whose ability to produce nisin has been erased by deletion of the gene nisA. The operon luxABCDE has been modified to be functional in gram-positive bacteria to confer a bioluminescent phenotype without the requirement of adding an exogenous substrate. In the plasmid pNZ8048, the operon was placed under control of the nisin-inducible nisA promoter. The chromosomal nisRK genes of Lc. lactis NZ9800 allow it to sense nisin in the environment and relay this signal via signal transduction proteins NisK and NisR to initiate transcription from nisA promoter. In the case of our sensor bacteria, this leads to production of luciferase and, thus, luminescence that can be directly measured from living bacteria. Luminescence can be detected as early as within minutes of induction. The nisin assay described here provides a detection limit in the sub-picogram level per ml, and a linear area between 1 - 1000 pg/ml. The sensitivity of this assay exceeds the performance of all previously published methods.

  11. Luminescence of PbCl2 and PbBr2 single crystals II. Luminescence and EPR of uv irradiated crystals

    NARCIS (Netherlands)

    Gruijter, W.C. de; Kerssen, J.

    1972-01-01

    PbCl2 and PbBr2 single crystals show a red luminescence under uv excitation at temperatures below 200°K. Furthermore, PbCl2 shows a yellow emission at temperatures below 40°K. The centers responsible for these emissions have been investigated by EPR measurements. These measurements indicate that due

  12. Regional endothermy as a trigger for gigantism in some extinct macropredatory sharks.

    Science.gov (United States)

    Ferrón, Humberto G

    2017-01-01

    Otodontids include some of the largest macropredatory sharks that ever lived, the most extreme case being Otodus (Megaselachus) megalodon. The reasons underlying their gigantism, distribution patterns and extinction have been classically linked with climatic factors and the evolution, radiation and migrations of cetaceans during the Paleogene. However, most of these previous proposals are based on the idea of otodontids as ectothermic sharks regardless of the ecological, energetic and body size constraints that this implies. Interestingly, a few recent studies have suggested the possible existence of endothermy in these sharks thus opening the door to a series of new interpretations. Accordingly, this work proposes that regional endothermy was present in otodontids and some closely related taxa (cretoxyrhinids), playing an important role in the evolution of gigantism and in allowing an active mode of live. The existence of regional endothermy in these groups is supported here by three different approaches including isotopic-based approximations, swimming speed inferences and the application of a novel methodology for assessing energetic budget and cost of swimming in extinct taxa. In addition, this finding has wider implications. It calls into question some previous paleotemperature estimates based partially on these taxa, suggests that the existing hypothesis about the evolution of regional endothermy in fishes requires modification, and provides key evidence for understanding the evolution of gigantism in active macropredators.

  13. Regional endothermy as a trigger for gigantism in some extinct macropredatory sharks.

    Directory of Open Access Journals (Sweden)

    Humberto G Ferrón

    Full Text Available Otodontids include some of the largest macropredatory sharks that ever lived, the most extreme case being Otodus (Megaselachus megalodon. The reasons underlying their gigantism, distribution patterns and extinction have been classically linked with climatic factors and the evolution, radiation and migrations of cetaceans during the Paleogene. However, most of these previous proposals are based on the idea of otodontids as ectothermic sharks regardless of the ecological, energetic and body size constraints that this implies. Interestingly, a few recent studies have suggested the possible existence of endothermy in these sharks thus opening the door to a series of new interpretations. Accordingly, this work proposes that regional endothermy was present in otodontids and some closely related taxa (cretoxyrhinids, playing an important role in the evolution of gigantism and in allowing an active mode of live. The existence of regional endothermy in these groups is supported here by three different approaches including isotopic-based approximations, swimming speed inferences and the application of a novel methodology for assessing energetic budget and cost of swimming in extinct taxa. In addition, this finding has wider implications. It calls into question some previous paleotemperature estimates based partially on these taxa, suggests that the existing hypothesis about the evolution of regional endothermy in fishes requires modification, and provides key evidence for understanding the evolution of gigantism in active macropredators.

  14. Luminescent macrocyclic lanthanide complexes

    Science.gov (United States)

    Raymond, Kenneth N; Corneillie, Todd M; Xu, Jide

    2014-05-20

    The present invention provides a novel class of macrocyclic compounds as well as complexes formed between a metal (e.g., lanthanide) ion and the compounds of the invention. Preferred complexes exhibit high stability as well as high quantum yields of lanthanide ion luminescence in aqueous media without the need for secondary activating agents. Preferred compounds incorporate hydroxy-isophthalamide moieties within their macrocyclic structure and are characterized by surprisingly low, non-specific binding to a variety of polypeptides such as antibodies and proteins as well as high kinetic stability. These characteristics distinguish them from known, open-structured ligands.

  15. LUMINESCENCE DETERMINATION OF ETODOLAC

    Directory of Open Access Journals (Sweden)

    A. V. Yegorova

    2015-02-01

    Full Text Available A highly sensitive, simple and rapid method for determination of non-steroidal anti- inflammatory drug – etodolac (Et in washings from surfaces of pharmaceutical equipment have been proposed. The intensity of native luminescence of water-n-propanol solutions of etodolac (λex= 274 nm; λlum= 350 nm was used as the analytical signal. The calibration graph is linear in the concentration range 0.014-2.3 μg/ml, the limit of detection is 0.5 ng/ml.

  16. A color-tunable luminescent material with functionalized graphitic carbon nitride as multifunctional supports

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Jiutian; Cao, Yudong; Fan, Hai; Hou, Juying; Ai, Shiyun, E-mail: ashy@sdau.edu.cn

    2015-12-15

    A color-tunable luminescent material was prepared based on the composition of functionalized graphitic carbon nitride (g-C{sub 3}N{sub 4}) and europium (III). The functionalized g-C{sub 3}N{sub 4} layers not only behave as multifunctional supports including ligand coordinated with europium (III) and a support structure for the formation of the luminescent material, but exhibit excitation wavelength-dependent luminescence, thus the energy transfer between the functionalized g-C{sub 3}N{sub 4} and europium (III) can match very well by controlling the emission wavelength of functionalized g-C{sub 3}N{sub 4}. The as-prepared materials was comprehensively characterized via X-ray photoelectron spectroscopy, Fourier Transform Infrared spectroscopy, X-ray scattering techniques, Ultraviolet and Visible spectrophotometer, fluorescence spectrophotometer, thermogravimetric analysis, etc. The luminescent material exhibits multi-color emissions which are consistent with the characteristic emissions of europium (III) and functionalized g-C{sub 3}N{sub 4}, and the photoluminescence quality and density of the europium (III) can be greatly enhanced. The brilliant optical properties of the materials make them suiting for multipurpose applications in practical fields. - Graphical abstract: Schematic illustration of the synthesis and basic composition of the luminescent material. Inset figures were luminescence emission spectra of g-C{sub 3}N{sub 4} (A), europium (III) complex (a) and luminescent material (b) with the same concentration in (B) (K{sub ex}=350 nm) and photographs of (left) H{sub 2}O and (right) the H{sub 2}O dispersion of luminescence emission spectra under 350 nm UV radiation. The energy transfer in the luminescent material matchs very well and it exhibits multi-color emissions simultaneously. The enhanced photoluminescence quality and density of the europium (III) makes them suiting for multipurpose applications in practical fields. - Highlights: • Luminescent

  17. Characterization of dehydration-induced luminescence of kaolinite

    Science.gov (United States)

    Lahav, N.; Coyne, L.; Lawless, J. G.

    1985-01-01

    The dehydration-induced luminescence of a colloidal kaolinite is investigated experimentally, with particular attention given to the effect of various treatments on the luminescence characteristics. It is found that the total photon count of the emitted light is linearly related to the film thickness up to a thickness of 30 microns; mechanical stress in the form of grinding increases the photon output and produces extensive changes in the emission kinetics. A direct check of the emission wavelength dependence (by using color filters) indicates that roughly 75 percent of the emission occurs in the wavelength range below 410 nm. It is also found that incorporation of fluorescent molecules into the kaolinite paste increases the photon output and may indicate the transfer of ultraviolet photons to the fluorescent probe.

  18. Luminescence study of praseodymium complexes with selected phosphonate ligands

    Science.gov (United States)

    Pawlicki, G.; Lis, S.

    2011-08-01

    Spectroscopic properties of Pr(III) complexes with diethyl(phthalimidomethyl)phosphonate (DPIP) and diethyl(2-oxo-2phenylethyl)phosphonate (DEPP) ligands were studied using absorption and luminescence spectroscopy. Absorption spectra of praseodymium nitrate hexahydrate complexes with phosphonate ligands in acetonitrile solutions were measured and used to calculate oscillator strength values. Luminescence (excitation and emission) spectra of the Pr(III) complexes with DPIP and DEPP were measured in CH 3CN, DMSO, methanol and toluene solutions. The sensitized emission of Pr(III), observed from different excited states ( 3P 0 or 1D 2), resulted from the intramolecular energy transfer from the ligands to the emissive levels of Pr(III). The Pr(III) complexes with studied ligands were synthesized and their compositions, as Pr(DEPP) 2(NO 3) 3 and Pr(DPIP) 3(NO 3) 3, were confirmed by elemental analyses. Using IR and 31P NMR spectroscopy coordination mode of the ligands were described.

  19. Mechanoresponsive Luminescent Molecular Assemblies: An Emerging Class of Materials.

    Science.gov (United States)

    Sagara, Yoshimitsu; Yamane, Shogo; Mitani, Masato; Weder, Christoph; Kato, Takashi

    2016-02-10

    The possibility to change the molecular assembled structures of organic and organometallic materials through mechanical stimulation is emerging as a general and powerful concept for the design of functional materials. In particular, the photophysical properties such as photoluminescence color, quantum yield, and emission lifetime of organic and organometallic fluorophores can significantly depend on the molecular packing, enabling the development of molecular materials with mechanoresponsive luminescence characteristics. Indeed, an increasing number of studies have shown in recent years that mechanical force can be utilized to change the molecular arrangement, and thereby the optical response, of luminescent molecular assemblies of π-conjugated organic or organometallic molecules. Here, the development of such mechanoresponsive luminescent (MRL) molecular assemblies consisting of organic or organometallic molecules is reviewed and emerging trends in this research field are summarized. After a brief introduction of mechanoresponsive luminescence observed in molecular assemblies, the concept of "luminescent molecular domino" is introduced, before molecular materials that show turn-on/off of photoluminescence in response to mechanical stimulation are reviewed. Mechanically stimulated multicolor changes and water-soluble MRL materials are also highlighted and approaches that combine the concept of MRL molecular assemblies with other materials types are presented in the last part of this progress report. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Hexagonal hafnium zirconium phosphate luminescent material

    International Nuclear Information System (INIS)

    Chenot, C.F.; Mathers, J.E.; Shaffer, F.N.

    1981-01-01

    A new compound with the chemical formula, (Hfsub(1-x)Zr)sub(3-y) Asub(4y)(POsub(4))sub(4), where x is in the range 0-1, A is at least one alkali metal from the group lithium, sodium, or potassium, and y is in the range 0.4-2.0. The material is luminescent and can be used in X-ray intensifying screens and other intensifying devices with conventional silver halide emulsion X-ray film. It exhibits luminescence both in the self-activated state, in which case it emits in the ultraviolet part of the spectrum, and in the presence of activators, when it emits in the visible region upon excitation by X-rays, ultraviolet, etc. When used with conventional X-ray film, its band emission overlaps, to at least some extent, the absorption edge of the X-ray film base, resulting in good image resolution without substantial crossover. Optimum speed and persistence values are obtained for x of about 0.005-0.5. The compound exhibits about 60 nm bandwidth emission, peaking at about 350 nm, with controlled persistence upon X-ray excitation. The method of preparing the compound is described. (DN)

  1. Emission Line Imaging and Spectroscopy of Distant Galaxies

    DEFF Research Database (Denmark)

    Zabl, Johannes Florian

    for the gas surrounding a galaxy. Around some objects the extended Ly αemission is so strong that it can be detected for individual objects. In this thesis extremely deep VLT/XSHOOTER rest-frame far-UV spectroscopy is presented for Himiko, a gigantic Ly α emitter at redshift z = 6.6 or a time when...

  2. Enhanced radiation detectors using luminescent materials

    Science.gov (United States)

    Vardeny, Zeev V.; Jeglinski, Stefan A.; Lane, Paul A.

    2001-01-01

    A radiation detecting device comprising a radiation sensing element, and a layer of luminescent material to expand the range of wavelengths over which the sensing element can efficiently detect radiation. The luminescent material being selected to absorb radiation at selected wavelengths, causing the luminescent material to luminesce, and the luminescent radiation being detected by the sensing element. Radiation sensing elements include photodiodes (singly and in arrays), CCD arrays, IR detectors and photomultiplier tubes. Luminescent materials include polymers, oligomers, copolymers and porphyrines, Luminescent layers include thin films, thicker layers, and liquid polymers.

  3. Luminescence dating in archaeology

    International Nuclear Information System (INIS)

    Wintle, A.G.

    2001-01-01

    Thermoluminescence (TL) dating is routinely applied to burnt lithic material. Simple fires are capable of enabling stones weighing a few hundred grams to reach 450 o C, thus zeroing the TL signal. TL dates have been obtained for Upper and Lower Paleolithic sites in Europe and the Near East. TL dating continues to be used for dating pottery and for authentification of ceramic works of art. Some recent studies report the use of optically stimulated luminescence (OSL) (also know as photoluminescence) for dating very small samples of quartz, e.g. from small pieces of pottery or frm metallurgical slag The major recent advance has been in the development of a reliable laboratory procedure for using the OSL signal from quartz to obtain the past radiation exposure. The quartz OSL signal is extremely sensitive to light and is reduced to a negligible level on exposure to direct sunlight for radionuclides during burial, signal to date san.sized quartz grains extracted from sediments, The OSL signal is stimulated by 470 nm light from emitting diodes and the detected using flirters centred on 340 nm A similar signal can be obtained from feldspar grain when are exposed to infrared wavelengths around 880 nm. The infrared stimulated luminescence (IRSL) signals is also rapidly depleted by exposure to sunlight, and dating of colluvial deposits from archaeological sites has been reported

  4. The luminescent concentrator illuminated

    Energy Technology Data Exchange (ETDEWEB)

    Slooff, L.H.; Kinderman, R.; Burgers, A.R.; Van Roosmalen, J.A.M. [ECN Solar Energy, Petten (Netherlands); Buechtemann, A.; Danz, R. [Fraunhofer Institute for Applied Polymer Research, Geiselbergstr. 69, D-14476 Golm (Germany); Meyer, T.B. [Solaronix SA, Rue de l' Ouriette 129, CH-1170 Aubonne (Switzerland); Chatten, A.J.; Farell, D.; Barnham, K.W.J. [Physics Department, Imperial College London, SW7 2BW (United Kingdom)

    2006-04-15

    Luminescent concentrator (LC) plates with different dyes were combined with standard multicrystalline silicon solar cells. External quantum efficiency measurements were performed, showing an increase in electrical current of the silicon cell (under AM1.5, 1 sun conditions, at normal incidence) compared to a bare cell. The influence of dye concentration and plate dimensions are addressed. The best results show a 1.7 times increase in the current from the LC/silicon cell compared to the silicon cell alone. This corresponds to an increase in power conversion efficiency of the silicon cell from 15 to 25%. To broaden the absorption spectrum of the LC, a second dye was incorporated in the LC plates. This results in a relative increase of 5-8% with respect to the one dye LC, giving a maximum power conversion efficiency of 26% on cell area. Using an extended ray-tracing model transmission, reflection and external quantum efficiency spectra were simulated and compared with measured spectra. The simulations deliver the luminescent quantum efficiencies of the two dyes as well as the background absorption by the polymer host. It is found that the quantum efficiency of the red emitting dye is 87%, which is one of the major loss factors in the measured LC. Using ray-tracing simulations it can be predicted that increasing the quantum efficiency to 95% would reduce this loss by almost 30%.

  5. Thermal dependence of luminescence lifetimes and radioluminescence in quartz

    Energy Technology Data Exchange (ETDEWEB)

    Pagonis, V., E-mail: vpagonis@mcdaniel.edu [McDaniel College, Physics Department, Westminster, MD 21157 (United States); Chithambo, M.L. [Department of Physics and Electronics, Rhodes University, PO BOX 94, Grahamstown 6140 (South Africa); Chen, R. [Raymond and Beverly Sackler School of Physics and Astronomy, Tel-Aviv University, Tel-Aviv 69978 (Israel); Chruścińska, A. [Institute of Physics, Nicholas Copernicus University, 87-100 Toruń (Poland); Fasoli, M. [Department of Materials Science, University of Milano-Bicocca, Via Cozzi 53, 20125 Milano (Italy); Li, S.H. [Department of Earth Sciences, The University of Hong Kong (Hong Kong); Martini, M. [Department of Materials Science, University of Milano-Bicocca, Via Cozzi 53, 20125 Milano (Italy); Ramseyer, K. [Institut für Geologie, Baltzerstrasse 1-3, 3012 Bern (Switzerland)

    2014-01-15

    During time-resolved optical stimulation experiments (TR-OSL), one uses short light pulses to separate the stimulation and emission of luminescence in time. Experimental TR-OSL results show that the luminescence lifetime in quartz of sedimentary origin is independent of annealing temperature below 500 °C, but decreases monotonically thereafter. These results have been interpreted previously empirically on the basis of the existence of two separate luminescence centers L{sub H} and L{sub L} in quartz, each with its own distinct luminescence lifetime. Additional experimental evidence also supports the presence of a non-luminescent hole reservoir R, which plays a critical role in the predose effect in this material. This paper extends a recently published analytical model for thermal quenching in quartz, to include the two luminescence centers L{sub H} and L{sub L}, as well as the hole reservoir R. The new extended model involves localized electronic transitions between energy states within the two luminescence centers, and is described by a system of differential equations based on the Mott–Seitz mechanism of thermal quenching. It is shown that by using simplifying physical assumptions, one can obtain analytical solutions for the intensity of the light during a TR-OSL experiment carried out with previously annealed samples. These analytical expressions are found to be in good agreement with the numerical solutions of the equations. The results from the model are shown to be in quantitative agreement with published experimental data for commercially available quartz samples. Specifically the model describes the variation of the luminescence lifetimes with (a) annealing temperatures between room temperature and 900 °C, and (b) with stimulation temperatures between 20 and 200 °C. This paper also reports new radioluminescence (RL) measurements carried out using the same commercially available quartz samples. Gaussian deconvolution of the RL emission spectra was

  6. Luminescence in Sulfides: A Rich History and a Bright Future

    Directory of Open Access Journals (Sweden)

    Philippe F. Smet

    2010-04-01

    Full Text Available Sulfide-based luminescent materials have attracted a lot of attention for a wide range of photo-, cathodo- and electroluminescent applications. Upon doping with Ce3+ and Eu2+, the luminescence can be varied over the entire visible region by appropriately choosing the composition of the sulfide host. Main application areas are flat panel displays based on thin film electroluminescence, field emission displays and ZnS-based powder electroluminescence for backlights. For these applications, special attention is given to BaAl2S4:Eu, ZnS:Mn and ZnS:Cu. Recently, sulfide materials have regained interest due to their ability (in contrast to oxide materials to provide a broad band, Eu2+-based red emission for use as a color conversion material in white-light emitting diodes (LEDs. The potential application of rare-earth doped binary alkaline-earth sulfides, like CaS and SrS, thiogallates, thioaluminates and thiosilicates as conversion phosphors is discussed. Finally, this review concludes with the size-dependent luminescence in intrinsic colloidal quantum dots like PbS and CdS, and with the luminescence in doped nanoparticles.

  7. Luminescence in Sulfides: A Rich History and a Bright Future

    Science.gov (United States)

    Smet, Philippe F.; Moreels, Iwan; Hens, Zeger; Poelman, Dirk

    2010-01-01

    Sulfide-based luminescent materials have attracted a lot of attention for a wide range of photo-, cathodo- and electroluminescent applications. Upon doping with Ce3+ and Eu2+, the luminescence can be varied over the entire visible region by appropriately choosing the composition of the sulfide host. Main application areas are flat panel displays based on thin film electroluminescence, field emission displays and ZnS-based powder electroluminescence for backlights. For these applications, special attention is given to BaAl2S4:Eu, ZnS:Mn and ZnS:Cu. Recently, sulfide materials have regained interest due to their ability (in contrast to oxide materials) to provide a broad band, Eu2+-based red emission for use as a color conversion material in white-light emitting diodes (LEDs). The potential application of rare-earth doped binary alkaline-earth sulfides, like CaS and SrS, thiogallates, thioaluminates and thiosilicates as conversion phosphors is discussed. Finally, this review concludes with the size-dependent luminescence in intrinsic colloidal quantum dots like PbS and CdS, and with the luminescence in doped nanoparticles.

  8. Luminescence and host lattice structure of crystalline micro and nanoparticles co-doped with lanthanide ions

    International Nuclear Information System (INIS)

    Zurba, Nadia Khaled; Ferreira, Jose Maria da Fonte

    2012-01-01

    This article reports the investigation of crystalline micro and nanoparticles codoped with lanthanide ions, aiming at correlate their host lattice structure and chemical composition to the luminescence features. For this purpose, five phosphors were characterized by X-ray diffraction (XRD), scanning electron microscopy coupled to energy dispersive X-ray (EDX) spectroscopy, and photoluminescence (PL) spectroscopy, namely performed by their chromatic coordinates, radiance, luminance and PL emission spectra. This type of investigation concerning the optical characterization of luminescent crystalline micro and nanoparticles doped with lanthanide ions might be useful for scientific and practical applications, such as in light-emitting devices, luminescent paintings, ceramics, sensors, in nanoscience and nanotechnology. (author)

  9. Effects of Radiation Doses on the Photostimulated Luminescence Response of Certain Herbs and Spices

    Directory of Open Access Journals (Sweden)

    Sandeva Ivana

    2017-03-01

    Full Text Available Ionizing radiation applied on food eliminates harmful microorganisms, prevents sprouting and delays ripening. All methods for detection of irradiated food are based on physical, chemical, biological or microbiological changes caused by the treatment with ionizing radiation. When minerals are exposed to ionizing radiation, they accumulate radiation energy and store it in the crystal lattice, by which some electrons remain trapped in the lattice. When these minerals are exposed to optical stimulation, trapped electrons are released. The phenomenon, called optically stimulated luminescence or photostimulated luminescence, occurs when released electrons recombine with holes from luminescence centers in the lattice, resulting in emission of light with certain wavelengths.

  10. Temperature lags of luminescence measurements in a commercial luminescence reader

    Energy Technology Data Exchange (ETDEWEB)

    Kitis, George [Aristotle University of Thessaloniki, Nuclear Physics Laboratory, 54124 Thessaloniki (Greece); Kiyak, Nafiye G. [ISIK University, Faculty of Science and Arts, Physics Department, Sile, 34980 Istanbul (Turkey); Polymeris, George S., E-mail: gspolymeris@ankara.edu.tr [Ankara University, Institute of Nuclear Sciences, Beşevler, 06100 Ankara (Turkey)

    2015-09-15

    The temperature recorded in thermoluminescence and optically stimulated luminescence equipments is not the temperature of the sample but that of the heating element on which the thermocouple is attached. Depending upon the rate of heating, a temperature difference appears between the samples and the heating element, termed as temperature lag, which could have serious effects on the curve shapes and trapping parameters. In the present work the temperature lag effect is studied in a newly developed luminescence equipment measuring both thermoluminescence and optically stimulated luminescence. It is found that the temperature lag could be large for heating rates above 2 K/s and it is strongly dependent upon the sample holder. A simple approximation method is proposed in order to both predict as well as correct for temperature lag effects in luminescence measurements.

  11. Luminescent Rare-earth-based Nanoparticles: A Summarized Overview of their Synthesis, Functionalization, and Applications

    OpenAIRE

    Escudero A.; Carrillo-Carrión C.; Zyuzin M.V.; Parak W.J.

    2016-01-01

    Rare-earth-based nanoparticles are currently attracting wide research interest in material science, physics, chemistry, medicine, and biology due to their optical properties, their stability, and novel applications. We present in this review a summarized overview of the general and recent developments in their synthesis and functionalization. Their luminescent properties are also discussed, including the latest advances in the enhancement of their emission luminescence. Some of their more rel...

  12. HFsub(1-x)2Rsub(x) 3P2O11 luminescent material

    International Nuclear Information System (INIS)

    Chenot, C.F.; Mathers, J.E.; Shaffer, F.N.

    1980-01-01

    A new compound corresponding to an oxide composition of 3:1 (HFsub(1-x)Zrsub(x))O 2 :P 2 O 5 . and having the empircal formula (HFsub(1-x)Zrsub(x)) 3 P 2 O 11 . where x is in the range of about 0 to 0.5. is an effective luminescent material for use in x-ray intensifying screens, and also an effective luminescent material host for Eusup(+2) blue emissions. (auth)

  13. The effects of binding type on luminescence LED phosphor based on GGG/Ce3+

    Science.gov (United States)

    Mikhailov, M. M.; Neshchimenko, V. V.; Shavlyuk, V. V.

    2014-12-01

    Luminescence and reflectance spectra of coatings based on gadolinium gallium garnet doped by cerium (GGG/Ce3+) with silicone resin or potassium liquid glass compound were analyzed depending on concentration. It was established that the maximum emissions of the coatings at 75 wt.% compound concentration have luminescence band at 570 nm and absorption band at 470 nm. Both bands were detected by absorption or emission of cerium ions in gadolinium gallium garnet. Ce3+ ion transition into Ce4+ ion was observed upon quantum absorption, and the reverse transition was observed upon quantum emission.

  14. Na-rich feldspar as a luminescence dosimeter in infrared stimulated luminescence (IRSL) dating

    DEFF Research Database (Denmark)

    Sohbati, Reza; Murray, Andrew; Jain, Mayank

    2013-01-01

    for measurement. This latter problem does not apply to Na-rich feldspar because of the absence of internal radioactivity.The potential application of Na-rich feldspar as a luminescence dosimeter for the IRSL dating of rock surfaces is investigated using a variety of sediment samples from different geological......, there is no detectable correlation between fading rates and the measured De values. The residual doses measured from the laboratory-bleached samples and a modern analogue suggest that the IR50 signals in both blue and yellow emissions bleach to the same degree, as do the corresponding pIRIR290 signals...

  15. Reflection measurements for luminescent powders

    Science.gov (United States)

    Kroon, R. E.

    2018-04-01

    Luminescent materials are useful in applications varying from lighting and display technologies to document security features and medical research, amongst many others. Measurement of the excitation range is an important consideration, and absorption bands are often determined from a decrease in the measured diffuse reflectance of the material using a ultraviolet-visible (UV-vis) spectrophotometer with an integrating sphere. Such a system may provide questionable results when used to measure the reflectance of a luminescence material, which is demonstrated for a Tb doped silica phosphor, because the system cannot differentiate between the reflected light and luminescence. It is shown that more reliable results are achieved for this phosphor by measuring the reflectance using a synchronous zero-offset scan in a fluorescence spectrometer equipped with an integrating sphere. This method is therefore recommended instead of traditional reflectance measurements using a UV-vis spectrophotometer for luminescent powders.

  16. Luminescent solutions and powders of new samarium complexes with N,N',O,O'-chelating ligands

    Science.gov (United States)

    Kharcheva, Anastasia V.; Nikolskiy, Kirill S.; Borisova, Nataliya E.; Ivanov, Alexey V.; Reshetova, Marina D.; Yuzhakov, Viktor I.; Patsaeva, Svetlana V.

    2016-04-01

    Imaging techniques in biology and medicine are crucial tools to obtain information on structural and functional properties of living cells and organisms. To fulfill the requirements associated with application of these techniques it appears necessary to design markers with specific characteristics. Luminescent complexes of trivalent lanthanide ions with chelating ligands are of increasing importance in biomedical applications because of their millisecond luminescence lifetime, narrow emission band, high signal-to-noise ratio and minimal photodamage to biological samples. In order to extend the available emission wavelength range the luminescent samarium chelates are highly desirable. In this study the ligands with diamides of 2,2'-bipyridin-6,6'-dicarboxylic acid were used to improve photophysical characteristics of samarium complexes. We report the luminescence characteristics of samarium complexes with novel ligands. All complexes exhibited the characteristic emission of Sm (III) ion with the lines at 565, 597, 605, 645 and 654 nm, the intensity strongly depended on the ligand. Absorption and luminescence excitation spectra of Sm (III) complexes showed main peaks in the UV range demonstrating lanthanide coordination to the ligand. The absolute lumenescence quantum yield was measured for solutions in acetonitrile with excitation at 350 nm. The largest luminescence quantum yield was found for the samarium complex Bipy 6MePy Sm (3%) being much higher that for samarium complexes reported in the literature earlier. These results prove as well that samarium chelates are potential markers for multiparametric imaging techniques.

  17. Ion irradiation effect of alumina and its luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Aoki, Yasushi; Yamamoto, Shunya; Naramoto, Hiroshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; My, N.T.

    1997-03-01

    The luminescence spectra of single crystalline alpha-alumina and ruby which has 0.02% of Cr{sub 2}O{sub 3} as a impurity, induced by 200 keV He{sup +} and Ar{sup +} irradiation were measured at room temperature as a function of irradiation dose. The analysis of the measured spectra showed the existence of three main luminescence features in the wavelength region of 250 to 350 nm, namely anionic color centers, F-center at 411 nm and F{sup +}-center at 330 nm and a band observed around 315 nm. As alpha-alumina was irradiated with He{sup +}, F-center and F{sup +}-center luminescence grew and decayed, but the behaviors of those were different from each other. It seems that a concentration quenching occurred on the F-center luminescence in the dose range above 1x10{sup 14} He/cm{sup 2}. Furthermore, F-center luminescence was strongly suppressed in ruby, compared with that in alumina. On the other hand, the luminescence band around 315 nm appeared only in the early stage of irradiation and did not show its growth part. The dose dependent behavior was similar to that of Cr{sup 3+} emission at 695 nm (R-line) in ruby in both cases of He{sup +} and Ar{sup +} irradiation. Based on the experimental results mentioned above, the processes of defect formation and excitation in alumina in the early stage of ion irradiation will be discussed. (author)

  18. Gigantic turtles (pleurodira, podocnemididae from the late miocene-early pliocene of South western amazon

    Directory of Open Access Journals (Sweden)

    1993-01-01

    Full Text Available TORTUES GIGANTESQUES (PLEURODIRA, PODOCNEMIDIDAE DU MIOCÈNE SUPÉRIEUR-PLIOCÈNE INFÉRIEUR D’AMAZONIE OCCIDENTALE. Sont décrits de nouveaux spécimens de tortue géante provenant du Huayquérien (Miocène supérieur-Pliocène inférieur d’Amazonie occidentale, région de l’Acre, Brésil et Pérou. à cette occasion, une brève revue des découvertes de tortues de cette région est donnée. Le Huayquérien a produit de gigantesques Podocnemidinae voisins de Stupendemys geographicus, un très grand Podocnemis, un ou deux très grands Chelus, un autre très grand Chelidae indéterminé (éventuellement Phrynops, un nombre indéterminé de Podocnemidinae et de Chelidae de la taille des espèces actuelles et un très grand Testudininae terrestre, Chelonoidis sp. Les couches holocènes ont livré aussi une espèce du genre Chelonoidis et probablement une espèce de Podocnemidinae, toutes deux de la taille des espèces actuelles. TORTUGAS GIGANTESCAS (PLEURODIRA, PODOCNEMIDIDAE EN EL MIOCENO SUPERIOR-PLIOCENO INFERIOR DE LA AMAZONIA OCCIDENTAL. Se describen especimenes gigantescos procedentes de la región del Acre, Perú y Brasil, de edad Huayqueriense (Mioceno superior-Plioceno inferior. Este estudio da la oportunidad de hacer una breve revisión de los taxones de tortugas descubiertas en esta área. ésta cuenta con gigantescos Podocnemidinae, atribuidos a Stupendemys y a un género afín, un Podocnemis gigante, una o dos especies de Chelus gigantes, otro Chelidae gigante (posiblemente un Phrynops, un número indefinido de especies de Podocnemidinae y Chelidae del tamaño de las actuales y un Testudininae terrestre gigante del género Chelonoidis. Del Holoceno proceden también una especie de Chelonoidis y una de Podocnemidinae, ambas del tamaño de las actuales. Gigantic turtle bones from the Acre region (Peru-Brazil that are Huayquerian (Late Miocene-Early Pliocene in age, are described. A short review of the chelonian fossil fauna from the

  19. Modelling the luminescence of iridium cyclometalated complexes encapsulated in cucurbituril.

    Science.gov (United States)

    Alrawashdeh, Lubna R; Cronin, Michael P; Day, Anthony I; Wallace, Lynne; Woodward, Clifford E

    2018-01-15

    Iridium(iii) cyclometalated complexes in aqueous solution often display relatively weak luminescence. It has been shown in previous work that this emission can be significantly enhanced (by up to two orders of magnitude) by encapsulation in cucurbit[10]uril (Q[10]). Luminescence lifetime measurements suggest a dynamic self-quenching mechanism is active, possibly due to displacement of an excited guest complex via collision with an unbound complex. We devise a model for the association of a group of iridium(iii) cyclometalated complexes with Q[10]. The model parameters are then fitted to steady-state emission titration curves. The excellent agreement of experimental data with the model provides valuable mechanistic information relating to the way this class of metal complexes interact and associate with the Q[10] host.

  20. Naturally Efficient Emitters: Luminescent Organometallic Complexes Derived from Natural Products

    Science.gov (United States)

    Zhang, Wen-Hua; Young, David J.

    2013-08-01

    Naturally occurring molecules offer intricate structures and functionality that are the basis of modern medicinal chemistry, but are under-represented in materials science. Herein, we review recent literature describing the use of abundant and relatively inexpensive, natural products for the synthesis of ligands for luminescent organometallic complexes used for organic light emitting diodes (OLEDs) and related technologies. These ligands are prepared from the renewable starting materials caffeine, camphor, pinene and cinchonine and, with the exception of caffeine, impart performance improvements to the emissive metal complexes and resulting OLED devices, with emission wavelengths that span the visible spectrum from blue to red. The advantages of these biologically-derived molecules include improved solution processibility and phase homogeneity, brighter luminescence, higher quantum efficiencies and lower turn-on voltages. While nature has evolved these carbon-skeletons for specific purposes, they also offer some intriguing benefits in materials science and technology.

  1. Vínculos observacionais para o processo-S em estrelas gigantes de Bário

    Science.gov (United States)

    Smiljanic, R. H. S.; Porto de Mello, G. F.; da Silva, L.

    2003-08-01

    Estrelas de bário são gigantes vermelhas de tipo GK que apresentam excessos atmosféricos dos elementos do processo-s. Tais excessos são esperados em estrelas na fase de pulsos térmicos do AGB (TP-AGB). As estrelas de bário são, no entanto, menos massivas e menos luminosas que as estrelas do AGB, assim, não poderiam ter se auto-enriquecido. Seu enriquecimento teria origem em uma estrela companheira, inicialmente mais massiva, que evolui pelo TP-AGB, se auto-enriquece com os elementos do processo-s e transfere material contaminado para a atmosfera da atual estrela de bário. A companheira evolui então para anã branca deixando de ser observada diretamente. As estrelas de bário são, portanto, úteis como testes observacionais para teorias de nucleossíntese pelo processo-s, convecção e perda de massa. Análises detalhadas de abundância com dados de alta qualidade para estes objetos são ainda escassas na literatura. Neste trabalho construímos modelos de atmosferas e, procedendo a uma análise diferencial, determinamos parâmetros atmosféricos e evolutivos de uma amostra de dez gigantes de bário e quatro normais. Determinamos seus padrões de abundância para Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Y, Zr, Ba, La, Ce, Nd, Sm, Eu e Gd, concluindo que algumas estrelas classificadas na literatura como gigantes de bário são na verdade gigantes normais. Comparamos dois padrões médios de abundância, para estrelas com grandes excessos e estrelas com excessos moderados, com modelos teóricos de enriquecimento pelo processo-s. Os dois grupos de estrelas são ajustados pelos mesmos parâmetros de exposição de nêutrons. Tal resultado sugere que a ocorrência do fenômeno de bário com diferentes intensidades não se deve a diferentes exposições de nêutrons. Discutimos ainda efeitos nucleossintéticos, ligados ao processo-s, sugeridos na literatura para os elementos Cu, Mn, V e Sc.

  2. Bariones y gravitones gigantes en el marco de la correspondencia AdS/CFT

    OpenAIRE

    Picos Sol, Marco Antonio

    2012-01-01

    Se construyen y analizan dos tipos de configuraciones que pueden construirse en el espacio dual a la teoría ABJM (en la dualidad AdS_4/CFT_3): gravitones gigantes y vértices bariónicos. Ambas configuraciones hacen uso de la posibilidad de enrrollar branas en ciclos topológicamente no triviales en el lado gravitatorio de la dualidad. Los vértices bariónicos están formados por branas enrrolladas atadas a cuerdas que se extienden hasta la frontera de AdS, y son vistos desde el lado gauge com...

  3. Formación y evolución de planetas gigantes

    Science.gov (United States)

    Benvenuto, O. G.; Brunini, A.

    Presentamos el estado actual del trabajo que estamos realizando en el estudio de la formación de planetas gigantes. Detallamos los algoritmos numéricos necesarios para realizar este tipo de cálculo. Presentamos algunos resultados de la formación de objetos con masas de hasta una docena de veces la del planeta Júpiter, resaltando las principales caracteríticas. Finalmente detallamos los problemas que pensamos abordar en un futuro cercano en este tema de investigación.

  4. A Gigantic Molecular Wheel of {Gd140}: A New Member of the Molecular Wheel Family.

    Science.gov (United States)

    Zheng, Xiu-Ying; Jiang, You-Hong; Zhuang, Gui-Lin; Liu, Da-Peng; Liao, Hong-Gang; Kong, Xiang-Jian; Long, La-Sheng; Zheng, Lan-Sun

    2017-12-20

    Nanoscale inorganic wheel-shaped structures are one of the most striking types of molecular aggregations. Here, we report the synthesis of a gigantic lanthanide wheel cluster containing 140 Gd 3+ atoms. As the largest lanthanide cluster reported thus far, {Gd 140 } features an attractive wheel-like structure with 10-fold symmetry. The nanoscopic molecular wheel possesses the largest diameter of 6.0 nm and displays high stability in solution, which allows direct visualization by scanning transmission electron microscopy. The newly discovered lanthanide {Gd 140 } cluster represents a new member of the molecular wheel family.

  5. Miocarditis de células gigantes que simula un infarto agudo de miocardio

    Directory of Open Access Journals (Sweden)

    Andrea Zappi

    2009-01-01

    Full Text Available La miocarditis de células gigantes (MCG es una entidad rara, de causa desconocida, de probable etiología autoinmune. Puede presentarse como insuficiencia cardíaca refractaria, asociarse con arritmias ventriculares y en otras ocasiones simular un infarto agudo de miocardio. Su pronóstico con frecuencia es ominoso, salvo que se realicen tratamiento inmunosupresor o trasplante cardíaco, este último con elevada recurrencia.REV ARGENT CARDIOL 2009;77:60-62.

  6. Nevralgia paratrigeminal de Raeder como forma de expressão de aneurisma gigante intracavernoso

    Directory of Open Access Journals (Sweden)

    Marcelo Gabriel Vega

    1994-03-01

    Full Text Available Os autores apresentam o caso de uma paciente do sexo feminino de 50 anos de idade com quadro de dor ocular à direita, secundária a aneurisma gigante intracavernoso diagnosticada como nevralgia paratrigeminal de Raeder. A paciente foi tratada cirurgicamente com "trapping" da carótida interna direita associado a revascularização cerebral (temporal superficial - ramo profundo da cerebral média com ótima evolução pós-cirúrgica. Discute-se a identidade da síndrome e os diagnósticos diferenciais baseados em revisão da literatura.

  7. Características hidráulicas de tubos de bambu gigante

    OpenAIRE

    Almeida Neto,José Adolfo de; Testezlaf,Roberto; Matsura,Edson Eiji

    2000-01-01

    Tendo em vista a falta de estudos e pesquisas que possibilitem o desenvolvimento de tecnologias para o aproveitamento de bambu gigante (Dendrocalamus giganteus) como conduto de água procurou-se, com este trabalho, verificar a validade das equações de Darcy-Weisbach, Hazen-Williams e Manning, na estimativa da perda de carga em tubulações de bambu submetidos a dois processos de remoção de nós dos colmos: ao método de impacto por lâminas circulares e ao de um dispositivo mecânico desenvolvido es...

  8. Sexithiophenes as efficient luminescence quenchers of quantum dots

    Directory of Open Access Journals (Sweden)

    Christopher R. Mason

    2011-12-01

    Full Text Available Sexithiophenes 1a and 1b, in which a 4-(dimethylaminophenyl unit is incorporated as an end-capping group, were synthesised and characterised by cyclic voltammetry, absorption spectroscopy and UV–vis spectroelectrochemistry. Additionally, their ability to function as effective luminescence quenchers for quantum dot emission was studied by photoluminescence spectroscopy and compared with the performance of alkyl end-capped sexithiophenes 2a and 2b.

  9. Luminescence properties of piezoelectric single crystals with langasite structure

    International Nuclear Information System (INIS)

    Itoh, Minoru; Takagi, Shinya; Kitaura, Mamoru; Fujita, Masami; Endo, Naoyuki

    2007-01-01

    Luminescence properties of single crystals of langasite (LGS), langataite (LGT), and langanite (LGN) are investigated at 5 K by using synchrotron radiation as an exciting light source. Two emission bands are observed at 420 and 500 nm in LGS, at 410 and 460 nm in LGT, and at 500 and 535 nm in LGN. The origin of these bands is discussed by reference to the electronic structure of LGS

  10. Spectroscopic studies on the lanthanide sensitized luminescence and chemiluminescence properties of fluoroquinolone with different structure

    Science.gov (United States)

    Sun, Chunyan; Ping, Hong; Zhang, Minwei; Li, Hongkun; Guan, Fengrui

    2011-11-01

    Lanthanide sensitized luminescence and chemiluminescence (CL) are of great importance because of the unique spectral properties, such as long lifetime, large Stokes shifts, and narrow emission bands characteristic to lanthanide ions (Ln 3+). With the fluoroquinolone (FQ) compounds including enoxacin (ENX), norfloxacin (NFLX), lomefloxacin (LMFX), fleroxacin (FLRX), ofloxacin (OFLX), rufloxacin (RFX), gatifloxacin (GFLX) and sparfloxacin (SPFX), the luminescence and CL properties of Tb 3+-FQ and Eu 3+-FQ complexes have been investigated in this contribution. Ce 4+-SO 32- in acidic conditions was taken as the CL system and sensitized CL intensities of Tb 3+-FQ and Eu 3+-FQ complexes were determined by flow-injection analysis. The luminescence and CL spectra of Tb 3+-FQ complexes show characteristic peaks of Tb 3+ at 490 nm, 545 nm, 585 nm and 620 nm. Complexes of Tb 3+-ENX, Tb 3+-NFLX, Tb 3+-LMFX and Tb 3+-FLRX display relatively strong emission intensity compared with Tb 3+-OFLX, Tb 3+-RFX, Tb 3+-GFLX and Tb 3+-SPFX. Quite weak peaks with unique characters of Eu 3+ at 590 nm and 617 nm appear in the luminescence and CL spectra of Eu 3+-ENX, but no notable sensitized luminescence and CL of Eu 3+ could be observed when Eu 3+ is added into other FQ. The distinct differences on emission intensity of Tb 3+-FQ and Eu 3+-FQ might originate from the different energy gap between the triplet levels of FQ and the excited levels of the Ln 3+. The different sensitized luminescence and CL signals among Tb 3+-FQ complexes could be attributed to different optical properties and substituents of these FQ compounds. The detailed mechanism involved in the luminescence and CL properties of Tb 3+-FQ and Eu 3+-FQ complexes has been investigated by analyzing the luminescence and CL spectra, quantum yields, and theoretical calculation results.

  11. Grassy Silica Nanoribbons and Strong Blue Luminescence

    Science.gov (United States)

    Wang, Shengping; Xie, Shuang; Huang, Guowei; Guo, Hongxuan; Cho, Yujin; Chen, Jun; Fujita, Daisuke; Xu, Mingsheng

    2016-09-01

    Silicon dioxide (SiO2) is one of the key materials in many modern technological applications such as in metal oxide semiconductor transistors, photovoltaic solar cells, pollution removal, and biomedicine. We report the accidental discovery of free-standing grassy silica nanoribbons directly grown on SiO2/Si platform which is commonly used for field-effect transistors fabrication without other precursor. We investigate the formation mechanism of this novel silica nanostructure that has not been previously documented. The silica nanoribbons are flexible and can be manipulated by electron-beam. The silica nanoribbons exhibit strong blue emission at about 467 nm, together with UV and red emissions as investigated by cathodoluminescence technique. The origins of the luminescence are attributed to various defects in the silica nanoribbons; and the intensity change of the blue emission and green emission at about 550 nm is discussed in the frame of the defect density. Our study may lead to rational design of the new silica-based materials for a wide range of applications.

  12. Luminescent nanoparticles and their applications in the life sciences

    Science.gov (United States)

    Sreenivasan, Varun K. A.; Zvyagin, Andrei V.; Goldys, Ewa M.

    2013-05-01

    Nanoparticles have recently emerged as an important group of materials used in numerous disciplines within the life sciences, ranging from basic biophysical research to clinical therapeutics. Luminescent nanoparticles make excellent optical bioprobes significantly extending the capabilities of alternative fluorophores such as organic dyes and genetically engineered fluorescent proteins. Their advantages include excellent photostability, tunable and narrow spectra, controllable size, resilience to environmental conditions such as pH and temperature, combined with a large surface for anchoring targeting biomolecules. Some types of nanoparticles provide enhanced detection contrast due to their long emission lifetime and/or luminescence wavelength blue-shift (anti-Stokes) due to energy upconversion. This topical review focuses on four key types of luminescent nanoparticles whose emission is governed by different photophysics. We discuss the origin and characteristics of optical absorption and emission in these nanoparticles and give a brief account of synthesis and surface modification procedures. We also introduce some of their applications with opportunities for further development, which could be appreciated by the physics-trained readership.

  13. Implementation of a neural network for multispectral luminescence imaging of lake pigment paints.

    Science.gov (United States)

    Chane, Camille Simon; Thoury, Mathieu; Tournié, Aurélie; Echard, Jean-Philippe

    2015-04-01

    Luminescence multispectral imaging is a developing and promising technique in the fields of conservation science and cultural heritage studies. In this article, we present a new methodology for recording the spatially resolved luminescence properties of objects. This methodology relies on the development of a lab-made multispectral camera setup optimized to collect low-yield luminescence images. In addition to a classic data preprocessing procedure to reduce noise on the data, we present an innovative method, based on a neural network algorithm, that allows us to obtain radiometrically calibrated luminescence spectra with increased spectral resolution from the low-spectral resolution acquisitions. After preliminary corrections, a neural network is trained using the 15-band multispectral luminescence acquisitions and corresponding spot spectroscopy luminescence data. This neural network is then used to retrieve a megapixel multispectral cube between 460 and 710 nm with a 5 nm resolution from a low-spectral-resolution multispectral acquisition. The resulting data are independent from the detection chain of the imaging system (filter transmittance, spectral sensitivity of the lens and optics, etc.). As a result, the image cube provides radiometrically calibrated emission spectra with increased spectral resolution. For each pixel, we can thus retrieve a spectrum comparable to those obtained with conventional luminescence spectroscopy. We apply this method to a panel of lake pigment paints and discuss the pertinence and perspectives of this new approach.

  14. Study of Polymeric Luminescent Blend (PC/PMMA) Doped with Europium Complex under Gamma-Iradiation

    International Nuclear Information System (INIS)

    Parra, D. F.

    2006-01-01

    Spectroscopic properties of blends formed by bisphenol-A polycarbonate (PC) and poly(methyl methacrylate) (PMMA) doped with europium in organic complex were studied. Polymeric luminescent blends are potential materials for many applications; however, little information has been reported concerning the stability under thermal and radiation conditions. Luminescent films were synthesized from europium thenoyltrifluoroacetonate at different concentrations doped in PC/PMMA blends. Films produced of the luminescent polymer blend were irradiated in a 60 C o source. Their luminescent properties, in the solid state, as well as, the thermal oxidative resistance after gamma irradiation was investigated. These systems were characterized by elemental analysis, thermogravimetry (TGA), differential scanning calorimetry (DSC) and infrared spectroscopy (FTIR). Based on TGA data, the thermal stability of PC/PMMA:(tta)3 system is higher than the polymer blend. The DSC results indicated that those new systems are chemically stables. The emission spectra of the Eu 3 +-tta complex doped in the PC/PMMA recorded at 298 and 77 K exhibited the characteristic bands arising from the 5 D 0 →7 F J transitions (J = 0-6). The luminescence intensity decreases with increasing of precursor concentration in the doped polymer obtained by chemical reaction. This result is different from that of samples obtained by physical method in melting doping. The blend was irradiated under ionizing radiation of 60 C o source. After irradiation of the luminescent films the physical properties of luminescence, thermal and oxidative stability were evaluated.(Fapesp and Cnpq financial support)

  15. Study of optical absorption, visible emission and NIR–vis luminescence spectra of Tm{sup 3+}/Yb{sup 3+}, Ho{sup 3+}/Yb{sup 3+} and Tm{sup 3+}/Ho{sup 3+}/Yb{sup 3+} doped tellurite glasses

    Energy Technology Data Exchange (ETDEWEB)

    Seshadri, M., E-mail: seshumeruva@gmail.com [Institute of Physics, University of Campinas, UNICAMP, P.O. Box 6165, Campinas 13083-970 (Brazil); Barbosa, L.C.; Cordeiro, C.M.B.; Radha, M. [Institute of Physics, University of Campinas, UNICAMP, P.O. Box 6165, Campinas 13083-970 (Brazil); Sigoli, F.A. [Institute of Chemistry, University of Campinas, UNICAMP, P.O. Box 6154, Campinas 13083-970 (Brazil); Ratnakaram, Y.C. [Department of Physics, Sri Venkateswara University, SVU, Tirupat 517502 (India)

    2015-10-15

    Tm{sup 3+}/Yb{sup 3+}, Ho{sup 3+}/Yb{sup 3+} co-doped and Tm{sup 3+}/Ho{sup 3+}/Yb{sup 3+} triply doped TeO{sub 2}–Bi{sub 2}O{sub 3}–ZnO–Li{sub 2}O–Nb{sub 2}O{sub 5} (TBZLN) tellurite glasses were prepared by melt quenching method. Judd–Ofelt intensity parameters (Ω{sub λ}, λ=2, 4 and 6), radiative transition probabilities, branching ratios and radiative lifetimes of Tm{sup 3+}, Ho{sup 3+} ions in co-doped TBZLN glasses were calculated from the optical absorption spectra. Excitation, visible luminescence and decay lifetimes in visible region were also investigated. The stimulated emission and gain cross-sections for the Tm{sup 3+}:{sup 3}F{sub 4}→{sup 3}H{sub 6} (1700 nm) and Ho{sup 3+}:{sup 5}I{sub 7}→{sup 5}I{sub 8} (1956 nm) transitions in co-doped TBZLN glasses have been analyzed and compared with those of other reported glasses. Up-conversion luminescence was observed in TBZLN glasses under 980 nm laser excitation and energy transfer mechanisms have been discussed. Finally, CIE color co-ordinates were calculated and it is observed that the color co-ordinates fall in blue and green regions for Tm{sup 3+}/Yb{sup 3+} and Ho{sup 3+}/Yb{sup 3+} co-doped TBZLN glasses, respectively. A subsequent shift in color co-ordinates from green to greenish-yellow region has been observed with an increase in the concentration (0.1, 0.5 and 1.0 mol%) of Tm{sup 3+} ions in Tm{sup 3+}/Ho{sup 3+}/Yb{sup 3+} triply doped TBZLN glasses. - Highlights: • High degree of covalecy of RE–O bond in co-doped TBZLN glasses was observed. • Tm{sup 3+}:{sup 1}D{sub 2}→{sup 3}F{sub 4} and Ho{sup 3+}:{sup 5}F{sub 4}({sup 5}S{sub 2})→{sup 5}I{sub 8} transitions show high emission cross-section. • Visible and strong 793 nm emission was observed when pumped by 980 nm diode laser. • Triply doped glasses exhibits tunable emission intensity by increasing Tm{sup 3+} ions.

  16. Goldenphilicity: Luminescent gold compounds

    International Nuclear Information System (INIS)

    Sansores, L.E.

    2002-01-01

    In the solids and molecules different types of bonds are presented depending on the involved atoms, covalent bonds are common among elements of open shell, where more bond orbitals are filled than anti bond orbitals. It is expected that ionic bonds among closed shell atoms which have charges of opposite sign. Bonds type Van der Waals are presented among molecules which have a bipolar moment. It would not be expected bonds among zero charge species, or more generally with the same nominal charge and in any case the attractive forces would be very small. In fact it is expected that two metallic cations to be repelled each other. There recently is evidence that in organic or organometallic compounds could exist attractive interactions between two cations of the d 8 -d 10 -s 2 families. These bonds are weak but stronger than those of Van der Waals. They are compared with the hydrogen bonds. In this work it was reviewed some examples in which the goldenphilicity plays an important role in the luminescence that the gold complexes present. Examples of mono, bi and trinuclear and the structures that these organometallic compounds could take are examined. (Author)

  17. Powerful visible (530???770 nm) luminescence in Yb,Ho:GGG with IR diode pumping.

    Science.gov (United States)

    Kir'yanov, Alexander; Aboites, V; Belovolov, A; Timoshechkin, M; Belovolov, M; Damzen, M; Minassian, A

    2002-08-12

    Powerful visible luminescence in a Gadolinium Gallium Garnet (GGG) crystal, co-activated with Yb3+ (~15 at.%) and Ho3+ (~0.1 at.%) ions, is investigated under CW laser diode pumping (lambda = 938 and 976 nm). The main visible emission band is observed in the green with its peak at lambda ~540 nm) and measured to be about 10% with respect to Yb3+ IR luminescence (lambda ~1000 nm). Red (lambda ~650 nm) and near-IR (lambda ~755 nm) emission bands are also observed but are weaker (about 3-5%). Analysis of the crystal absorption and luminescence spectra allows one to conclude that Yb3+ - Ho3+ stepwise up-conversion is the mechanism explaining the phenomenon. Ho3+ ions embedded in the crystal in small concentration are shown to form an effective reservoir for energy transferred from the excited Yb3+ subsystem and to be an efficient source of the visible emission.

  18. Paleodosimetrical properties of sodium alkali feldspars and problems of luminescence dating of sediments

    International Nuclear Information System (INIS)

    Huett, Galina; Jaek, Ivar

    1996-01-01

    Emission spectra of natural alkali feldspars extracted from sediments are studied using a CCD-camera based high sensitivity spectrometer. Applying a semiconductor laser (860± 1 nm), two dominant emission bands, blue (410 nm) and orange (570 nm), are revealed in infrared optically stimulated luminescence (IROSL) spectra for the most of the sediments from Scandinavian sections. Luminescence and dosimetric al properties of the hole traps, the induced orange emission band typical of sodium alkali feldspars are studied. As a result, high light bleach ability but low stability of the dosimetric al information lit sodium alkali feldspars are established. Problems of luminescence dating of sediments based on the mixture of potassium-sodium alkali feldspars are discussed. (author)

  19. Toxicity Evaluation of Pig Slurry Using Luminescent Bacteria and Zebrafish

    Directory of Open Access Journals (Sweden)

    Wenyan Chen

    2014-07-01

    Full Text Available Biogas slurry has become a serious pollution problem and anaerobic digestion is widely applied to pig manure treatment for environmental protection and energy recovery. To evaluate environmental risk of the emission of biogas slurry, luminescent bacteria (Vibrio fischeri, larvae and embryos of zebrafish (Danio rerio were used to detect the acute and development toxicity of digested and post-treated slurry. Then the ability of treatment process was evaluated. The results showed that digested slurry displayed strong toxicity to both zebrafish and luminescent bacteria, while the EC50 for luminescent bacteria and the LC50 for larvae were only 6.81% (v/v and 1.95% (v/v respectively, and embryonic development was inhibited at just 1% (v/v. Slurry still maintained a high level of toxicity although it had been treated by membrane bioreactor (MBR, while the LC50 of larvae was 75.23% (v/v and there was a little effect on the development of embryos and V. fischeri; the results also revealed that the zebrafish larvae are more sensitive than embryos and luminescent bacteria to pig slurry. Finally, we also found the toxicity removal rate was higher than 90% after the treatment of MBR according to toxicity tests. In conclusion, further treatment should be used in pig slurry disposal or reused of final effluent.

  20. Application of Quantum Dot nanocrystal in Luminescent solar concentrators

    Science.gov (United States)

    Bakhoda, Shokoufeh; Khalaji Assadi, Morteza; Ahmadi Kandjani, Sohrab; Kayiem, Hussain H. Al; Hussain Bhat, Aamir

    2018-03-01

    The basic design of luminescent solar concentrator is a transparent plate doped with an appropriate luminescent material (organic dyes, quantum dots), which is able to absorb sunlight (direct and diffuse), and then guides photons produced by photoluminescence to its narrow edges where they are converted by photovoltaic cells. Unfortunately, LSCs have suffered from numerous efficiency losses. Therefore, new luminescent species and novel approaches are needed for its practical application. This paper deals with investigation of nonhazardous, environmental friendly luminescent species include CuInS2/ZnS core/shell QDs. The CuInS2/ZnS QDs possess advantages of Stocks shift as large as more than 130 nm and high photoluminescence quantum yield of 80%. The paper presents the effect of large stock shift CuInS2/ZnS QDs on reducing the reabsorption losses in LSC by using experimental investigation. The LSC sheets were fabricated by dispersing CuInS2/ZnS QDs particles in a polymethylmethacrylate waveguide. A series of LSCs (dimension 4.0 cm × 3.0 cm × 0.3cm) with different CuInS2/ZnS QDs particles concentration (0.015 and 0.03 wt.%) were fabricated and their optical properties (absorptions/emissions) were characterized. The results show that the CuInS2/ZnS QDs-LSC provides a promising way for the reduction of reabsorption losses in LSCs.

  1. Dosimetry based on thermally and optically stimulated luminescence

    International Nuclear Information System (INIS)

    Agersnap Larsen, Niels

    1999-01-01

    Thermally Stimulated Luminescence (TL) and Optically Stimulated Luminescence (OSL) properties of quartz and α-Al 2 O 3 have been investigated. Anneling-induced OSL and TL sensitivity changes in quartz has been investigated by experiments and modelling. This study does not support a pre-dose effect to account for the observed annealing-induced sensitivity change. The experimental data indicates a more simple mechanism that involves alteration of the concentration of the defect centers. Results from modelling of removal or creation of defect centers comparing well with experimentally obtained data. Thermal quenching of luminescence for the main emission center, the F-center, in α-Al 2 O 3 :C has been investigated by analysing TL curves obtained at different heating rates. The thermal quenching dependence of luminescence is found to follow the classical Mott-Seitz expression. Basic investigations of OSL properties of αAl 2 O 3 :C, including: the thermal depth of the OSL traps, the temperature dependence of OSL, and the OSL stimulation spectra. Simultaneous measurements of TL and thermally stimulated conductivity (TSC) are presented for γ-irradiated αAl 2 O 3 :C. Activation energy analysis of the data reveals a superposition of several first-order TL and TSC peaks caused by release of charge carriers from a distribution of trapping states. Furthermore a description of an experimental method developed to determine the sign of the thermally released charge carriers has been presented. (au)

  2. A novel neonatal Michelin Tire Baby Syndrome with craniosynostosis and gigantism

    Directory of Open Access Journals (Sweden)

    Ižbrahim Akalin

    2014-03-01

    Full Text Available     Michelin Tire Baby Syndrome is a rare congenital disorder and characterized clinically well defined multiple ring shaped skin creases. Our patient was born to onconsanguineous healthy parents as the third child of the family at 40 weeks of uneventful gestation with distinctive skin creases and gigantism. He was 4,950 g in weight (>90 percentile, 57.5 cm in length (>90 percentile, and had a head circumferences of 39.5 cm (>90 percentile at birth. The physical examination showed a rough face, brachicephaly and craniosynostosis. His vital and laboratory findings were within normal limits at birth. Cranial and renal ultrasonograms, Xray graphics and cytogenetic analyses were normal. Echocardiography revealed small patent ductus arteriosis and patent foramen ovale. In this report, we present a new case of Michelin Tire Baby Syndrome who is the first neonate associated with severe gigantism and craniosynostosis, in the literature. A review of the related literature has also been presented.

  3. Are sick individuals weak competitors? Competitive ability of snails parasitized by a gigantism-inducing trematode.

    Directory of Open Access Journals (Sweden)

    Otto Seppälä

    Full Text Available Parasitized individuals are often expected to be poor competitors because they are weakened by infections. Many trematode species, however, although extensively exploiting their mollusc hosts, also induce gigantism (increased host size by diverting host resources towards growth instead of reproduction. In such systems, alternatively to reduced competitive ability due to negative effects of parasitism on host performance, larger size could allow more efficient resource acquisition and thus increase the relative competitive ability of host individuals. We addressed this hypothesis by testing the effect of a trematode parasite Diplostomum pseudospathaceum on the competitive ability of its snail host Lymnaea stagnalis. We experimentally examined the growth of snails kept in pairs in relation to their infection status and intensity of resource competition (i.e. food availability. We found that parasitized snails grew faster and their reproduction was reduced compared to unparasitized individuals indicating parasite-induced gigantism. However, growth of the snails was faster when competing with parasitized individuals compared to unparasitized snails indicating reduced competitive ability due to parasitism. The latter effect, however, was relatively weak suggesting that the effects of the parasite on snail physiology may partly override each other in determining competitive ability.

  4. Gigantic negative magnetoresistance in the bulk of a disordered topological insulator

    Science.gov (United States)

    Breunig, Oliver; Wang, Zhiwei; Taskin, A A; Lux, Jonathan; Rosch, Achim; Ando, Yoichi

    2017-01-01

    With the recent discovery of Weyl semimetals, the phenomenon of negative magnetoresistance (MR) is attracting renewed interest. Large negative MR is usually related to magnetism, but the chiral anomaly in Weyl semimetals is a rare exception. Here we report a mechanism for large negative MR which is also unrelated to magnetism but is related to disorder. In the nearly bulk-insulating topological insulator TlBi0.15Sb0.85Te2, we observed gigantic negative MR reaching 98% in 14 T at 10 K, which is unprecedented in a nonmagnetic system. Supported by numerical simulations, we argue that this phenomenon is likely due to the Zeeman effect on a barely percolating current path formed in the disordered bulk. Since disorder can also lead to non-saturating linear MR in Ag2+δSe, the present finding suggests that disorder engineering in narrow-gap systems is useful for realizing gigantic MR in both positive and negative directions. PMID:28541291

  5. Biosensing with Luminescent Semiconductor Quantum Dots

    Directory of Open Access Journals (Sweden)

    Hedi Mattoussi

    2006-08-01

    Full Text Available Luminescent semiconductor nanocrystals or quantum dots (QDs are a recentlydeveloped class of nanomaterial whose unique photophysical properties are helping tocreate a new generation of robust fluorescent biosensors. QD properties of interest forbiosensing include high quantum yields, broad absorption spectra coupled to narrow sizetunablephotoluminescent emissions and exceptional resistance to both photobleaching andchemical degradation. In this review, we examine the progress in adapting QDs for severalpredominantly in vitro biosensing applications including use in immunoassays, asgeneralized probes, in nucleic acid detection and fluorescence resonance energy transfer(FRET - based sensing. We also describe several important considerations when workingwith QDs mainly centered on the choice of material(s and appropriate strategies forattaching biomolecules to the QDs.

  6. Optical luminescence spectroscopy as a probe of the surface mineralogy of Mars

    Science.gov (United States)

    Treiman, A. H.

    1992-01-01

    Optical luminescence (OpL) spectroscopy is an attractive use of a visible-near-IR spectrometer on a Mars lander because mineral products of atmosphere-surface interactions on Mars will probably have characteristic OpL spectra. Optical luminescence spectra would be taken at night, when a spectrometer might otherwise sit idle. Also needed would be a source of exciting radiation, which could be shared with other experiments. Optical luminescence is emission of nonthermal optical photons (near-UV through near-IR) as a response to energy input. On absorption of energy, an atom (or ion) will enter an excited state. The favored decay of many such excited states involving valence-band electrons is emission of an optical photon. Optical luminescence spectra can be useful in determining mineralogy and mineral composition. Optical luminescence in crystals can arise from essential elements (or ions), trace-element substituents (activators), or defects. Common activators in salts of alkali and alkaline earth elements include Mn(2+)(VI), other transition metals, the rare earths, and the actinides. Trace substituents of other species can enhance or quench OpL (e.g., Pb(2+) vs. Fe(3+)). Optical luminescence can also arise from defects in crystal structures, including those caused by radiation and shock.

  7. Near-infrared luminescence of cadmium pigments: in situ identification and mapping in paintings.

    Science.gov (United States)

    Thoury, Mathieu; Delaney, John K; Rie, E René de la; Palmer, Michael; Morales, Kathryn; Krueger, Jay

    2011-08-01

    A comprehensive study of the luminescence properties of cadmium pigments was undertaken to determine whether these properties could be used for in situ identification and mapping of the pigments in paintings. Cadmium pigments are semiconductors that show band edge luminescence in the visible range and deep trap luminescence in the red/infrared range. Emission maxima, quantum yields, and excitation spectra from the band edge and deep trap emissions were studied for sixty commercial cadmium pigments that span the color range from yellow to red (reflectance transition 470 to 660 nm). For paints containing cadmium pigments, luminescence from deep traps was more readily observable than that from the band edge, although the yield varied widely from zero to around 4.5%. Optimal excitation for emission is found to be in the visible for both pigments in powder form and mixed with a medium. The maxima of the deep trap emission shift with the band gap energy, providing a potentially useful way to assign pigment type even when used in pigment mixtures. The usefulness of the results of the study on mockups was demonstrated by the mapping of cadmium pigments of different hues with the aid of calibrated luminescence imaging spectroscopy in a painting by Edward Steichen, entitled Study for 'Le Tournesol' (1920). Analysis of the luminescence image cube reveals at least six unique spectral components, associated with emission from white pigments, paint binder, and cadmium red and yellow pigments. The results were compared with those from X-ray fluorescence spectrometry (XRF) and fiber-optic reflection spectroscopy (FORS) and the results obtained on paint samples containing cadmium pigments. These results show that, when present, the emission from traps can be used as an analytical tool to identify cadmium pigments, to distinguish among cadmium sulfide, cadmium zinc sulfide, and cadmium sulfoselenide, and to map cadmium pigments, even in mixtures.

  8. f-state luminescence of lanthanide and actinide ions in solution

    Energy Technology Data Exchange (ETDEWEB)

    Beitz, J.V.

    1993-09-01

    Detailed studies of the luminescence of aquated Am{sup 3+} are presented in the context of prior lanthanide and actinide ion work. The luminescing state of aquated Am{sup 3+} is confirmed to be {sup 5}D{sub l} based on observed emission and excitation spectra. The luminescence lifetime of Am{sup 3+} in H{sub 2}O solution is (22 {plus_minus} 3) ns and (155 {plus_minus} 4) ns in D{sub 2}O solution at 295 K. Judd-Ofelt transition intensity theory qualitatively describes the observed Am{sup 3+} relative integrated fluorescence intensities. Recent luminescence studies on complexed trivalent f-element ions in solution are reviewed as to the similarities and differences between lanthanide ion 4f state and actinide ion 5f state properties.

  9. Mesoporous material grafted with luminescent molecules for the design of selective metal ion chemosensor

    International Nuclear Information System (INIS)

    Zhang Huidong; Zhang Ping; Ye Kaiqi; Sun Yinghui; Jiang Shimei; Wang Yue; Pang Wenqin

    2006-01-01

    Luminescent Schiff-base groups have been successfully grafted on the surface of mesoporous material MCM-48. The grafted Schiff-base groups were employed to prepare luminescent Schiff-base-Zn complex that was covalently bound to the MCM-48 surface. These luminescent mesoporous materials were characterized with X-ray, UV-VIS and emission spectroscopic methods. Experimental results demonstrated that MCM-48 modified with functional groups exhibited novel luminescent property. The chemosensing property of modified MCM-48 sample was investigated. It was demonstrated that the fluorescence of MCM-48 solid with Schiff-base groups could be completely quenched by Cu 2+ cation and this mesoporous material was suitable for sensing Cu 2+ cation in aqueous media

  10. Circularly Polarized Luminescence of Curium: A New Characterization of the 5f Actinide Complexes

    Science.gov (United States)

    Law, Ga-Lai; Andolina, Christopher M.; Xu, Jide; Luu, Vinh; Rutkowski, Philip X.; Muller, Gilles; Shuh, David K.; Gibson, John K.; Raymond, Kenneth N.

    2012-01-01

    A key distinction between the lanthanide (4f) and actinide (5f) transition elements is the increased role of f-orbital covalent bonding in the latter. Circularly polarized luminescence (CPL) is an uncommon but powerful spectroscopy which probes the electronic structure of chiral, luminescent complexes or molecules. While there are many examples of CPL spectra for the lanthanides, this report is the first for an actinide. Two chiral, octadentate chelating ligands based on orthoamide phenol (IAM) were used to complex curium(III). While the radioactivity kept the amount of material limited to micromole amounts, the spectra of the highly luminescent complexes showed significant emission peak-shifts between the different complexes, consistent with ligand field effects previously observed in luminescence spectra. PMID:22920726

  11. Ion beam induced luminescence from diamond using an MeV ion microprobe

    Energy Technology Data Exchange (ETDEWEB)

    Bettiol, A.A.; Jamieson, D. N.; Prawer, S.; Allen, M.G. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

    1993-12-31

    Analysis of the luminescence induced by a MeV ion beam offers the potential to provide useful information about the chemical properties of atoms in crystals to complement the information provided by more traditional Ion Beam Analysis (IBA) such as Rutherford Backscattering Spectrometry (RBS), ion channeling and Particle Induced X-ray Emission (PIXE). Furthermore, the large penetration depth of the MeV ion beam offers several advantages over the relatively shallow penetration of keV electrons typically employed in cathodoluminescence. An Ion Beam Induced Luminescence (IBIL) detection system was developed for the Melbourne microprobe that allows the spatial mapping of the luminescence signal along with the signals from RBS and PIXE. Homoepitaxial diamond growth has been studied and remarkable shifts in the characteristic blue luminescence of diamond towards the green were observed in the overgrowth. This has been tentatively identified as being due to transition metal inclusions in the epitaxial layers. 8 refs., 2 refs.

  12. Exploring the effect of remote substituents and solution structure on the luminescence of three lanthanide complexes

    Energy Technology Data Exchange (ETDEWEB)

    Tropiano, Manuel; Blackburn, Octavia A.; Tilney, James A.; Hill, Leila R. [Chemistry Research Laboratory, University of Oxford, 12 Mansfield Road, Oxford OX1 3TA (United Kingdom); Just Sørensen, Thomas, E-mail: TJS@chem.ku.dk [Chemistry Research Laboratory, University of Oxford, 12 Mansfield Road, Oxford OX1 3TA (United Kingdom); Nano-Science Center and Department of Chemistry, University of Copenhagen, Universitetsparken 5, 2100 København Ø (Denmark); Faulkner, Stephen, E-mail: stephen.faulkner@chem.ox.ac.uk [Chemistry Research Laboratory, University of Oxford, 12 Mansfield Road, Oxford OX1 3TA (United Kingdom)

    2015-11-15

    Sensitized luminescence from trivalent lanthanide ions relies on an appropriate energy match between the sensitizer’s excited state (triplet or singlet) and the lanthanide excited state manifold, and also an efficient mechanism of energy transfer between the two. Here, the effect of remote substituents on the luminescence properties of a series of related lanthanide complexes has been investigated. The sensitized lanthanide centered emission is not invariably found to occur following excitation of all chromophores in all systems, and it is shown that only the most structurally congested of the systems investigated exhibited pronounced solvatochromism. - Highlights: • Effect of remote substituents and self-assembly on lanthanide luminescence. • Molecular structure rather than chromophore density defines lanthanide sensitization. • Kimura's and Horrocks' approach to determine lanthanide solvation is revisited. • Solvent alters sensitization pathways in multinuclear lanthanide complexes. • Increasing chromophore density may reduce lanthanide luminescence.

  13. Self absorption in luminescent solar concentrators

    NARCIS (Netherlands)

    Krumer, Z.

    2014-01-01

    Luminescent solar concentrators are photovoltaic devices made of thin transparent material, in which luminescent particles are dispersed. The incident light enters the device through its large facets and is subsequently absorbed by the luminescent particles, which re-emit it whilst changing its

  14. Geometry flexibility of copper iodide clusters: variability in luminescence thermochromism.

    Science.gov (United States)

    Benito, Quentin; Goff, Xavier F Le; Nocton, Gregory; Fargues, Alexandre; Garcia, Alain; Berhault, Aurélie; Kahlal, Samia; Saillard, Jean-Yves; Martineau, Charlotte; Trébosc, Julien; Gacoin, Thierry; Boilot, Jean-Pierre; Perruchas, Sandrine

    2015-05-04

    An original copper(I) iodide cluster of novel geometry obtained by using a diphosphine ligand is reported and is formulated [Cu6I6(PPh2(CH2)3PPh2)3] (1). Interestingly, this sort of "eared cubane" cluster based on the [Cu6I6] inorganic core can be viewed as a combination of the two known [Cu4I4] units, namely, the cubane and the open-chair isomeric geometries. The synthesis, structural and photophysical characterisations, as well as theoretical study of this copper iodide along with the derived cubane (3) and open-chair (2) [Cu4I4(PPh3)4] forms, were investigated. A new polymorph of the cubane [Cu4I4(PPh3)4] cluster is indeed presented (3). The structural differences of the clusters were analyzed by solid-state nuclear magnetic resonance spectroscopy. Luminescence properties of the three clusters were studied in detail as a function of the temperature showing reversible luminescence thermochromism for 1 with an intense orange emission at room temperature. This behavior presents different feature compared to the cubane cluster and completely contrasts with the open isomer, which is almost nonemissive at room temperature. Indeed, the thermochromism of 1 differs by a concomitant increase of the two emission bands by lowering the temperature, in contrast to an equilibrium phenomenon for 3. The luminescence properties of 2 are very different by exhibiting only one single band when cooled. To rationalize the different optical properties observed, density functional theory calculations were performed for the three clusters giving straightforward explanation for the different luminescence thermochromism observed, which is attributed to different contributions of the ligands to the molecular orbitals. Comparison of 3 with its [Cu4I4(PPh3)4] cubane polymorphs highlights the sensibility of the emission properties to the cuprophilic interactions.

  15. Familial gigantism

    Directory of Open Access Journals (Sweden)

    Wouter W. de Herder

    2012-01-01

    Full Text Available Familial GH-secreting tumors are seen in association with three separate hereditary clinical syndromes: multiple endocrine neoplasia type 1, Carney complex, and familial isolated pituitary adenomas.

  16. Familial gigantism

    NARCIS (Netherlands)

    W.W. de Herder (Wouter)

    2012-01-01

    textabstractFamilial GH-secreting tumors are seen in association with three separate hereditary clinical syndromes: multiple endocrine neoplasia type 1, Carney complex, and familial isolated pituitary adenomas.

  17. Progress in Direct Dating of Tephra via Thermo- and Optically Stimulated Luminescence

    Science.gov (United States)

    Clark-Balzan, L.; Smith, V.; Preusser, F.

    2016-12-01

    Luminescence dating utilizes natural dosimeters (minerals and mineralloids) to calculate either time elapsed since crystallization or the last exposure to light or intense heat. Direct dating of volcanic materials via luminescence has been attempted for nearly fifty years with varying degrees of success: dim luminescence signals, anomalous signal loss (`fading') from volcanogenic minerals, incomplete mineral separation, and mineralogical and geochemical variability have been problematic (Fattahi and Stokes, 2003). Recent advances in measurement protocols to probe signals less prone to anomalous fading (Tsukamoto et al., 2007; 2010), and the development of equipment that allows direct imaging of luminescence-emitting grains via EMCCD cameras (Clark-Balzan and Schwenninger, 2012) offer new opportunities for tephra dating. The lack of available luminescence data on a wide variety of tephra, however, makes it difficult to predict which measurement techniques will be generally applicable given presumed high inter- and intra-sample variability. Therefore we present first results from a systematic characterization of luminescence emissions from a geochemically and geographically diverse body of tephras. Spectrometric analysis of luminescence emitted from plagioclase, glass, and quartz fractions during thermal and optical stimulation provide key data for optimization and testing of measurement protocols. We also show preliminary results of EMCCD imaging of both mineral separates and bulk tephras, emphasizing identification and characterization of mineral constituents and luminescence properties via the simultaneous measurement of many grains. EMCCD imaging allows luminescence characterization on the single grain level, thereby revealing variability between grains which cannot be measured via standard spectromectric techniques. Clark-Balzan, L., Schwenninger, J.-L., 2012, Radiation Measurements, v. 47, pp. 797-802. Fattahi, M., Stokes, S., 2003, Earth Science Reviews, v. 62

  18. Luminescent materials and their applications

    CERN Document Server

    Virk, Hardev Singh

    2015-01-01

    It is pertinent to note that Luminescence phenomenon has once again occupied a central stage with the announcement of Nobel Prize in October 2014 to three Japanese scientists. The discovery of Galium Nitride proved to be a revolutionary step forward in creation of Blue LEDs. With the advent of LED lamps we now have more long-lasting and more efficient alternatives to older light sources. The Volume under reference consists of 9 Chapters, written by experts in the area of Luminescent Materials. First 5 Chapters are contributed as Review Papers and the last 4 are based on Research Papers.Chapter

  19. Granuloma central de células gigantes Giant cells central granuloma

    Directory of Open Access Journals (Sweden)

    Ayelén María Portelles Massó

    2011-03-01

    Full Text Available El granuloma reparativo central de células gigantes es una lesión proliferativa no neoplásica de etiología desconocida. Se presenta un paciente masculino de 40 años de edad, portador de prótesis parcial superior. Fue remitido al Servicio de Cirugía Maxilofacial del Hospital "V. I. Lenin" por presentar aumento de volumen en reborde alveolar superior, de color rojo grisáceo y que provocaba expansión de corticales óseas. Una vez analizados los exámenes clínicos, radiográficos e histopatológicos se diagnosticó un granuloma reparativo central de células gigantes Se realizó exéresis quirúrgica de la lesión y extracción de dientes adyacentes con una evolución satisfactoria sin señales de recidivas luego de tres años del tratamiento. El granuloma reparativo central de células gigantes se presentó como respuesta a un trauma. La correcta interpretación de los datos clínicos, radiográficos e histopatológicos nos permitió llegar al correcto diagnóstico y plan de tratamiento.Giant-cell central reparative granuloma is non neoplastic proliferative lesion of unknown etiology. We report a 40 years old male patient who was admitted at the Maxillofacial Service of the "V. I. Lenin" Hospital. The patient had partial upper prosthesis and was complaining of red-grey volume increase lesion in upper alveolar ridge which led to the expansion of cortical bone. Having analyzed clinical, radiographic and histopathological findings the case was concluded as a giant-cell central reparative granuloma. Surgical exeresis and adjunct tooth extraction were done. After three years of treatment, satisfactory follow up without recurrence is reported.

  20. Cerenkov luminescence tomography based on preconditioning orthogonal matching pursuit

    Science.gov (United States)

    Liu, Haixiao; Hu, Zhenhua; Wang, Kun; Tian, Jie; Yang, Xin

    2015-03-01

    Cerenkov luminescence imaging (CLI) is a novel optical imaging method and has been proved to be a potential substitute of the traditional radionuclide imaging such as positron emission tomography (PET) and single-photon emission computed tomography (SPECT). This imaging method inherits the high sensitivity of nuclear medicine and low cost of optical molecular imaging. To obtain the depth information of the radioactive isotope, Cerenkov luminescence tomography (CLT) is established and the 3D distribution of the isotope is reconstructed. However, because of the strong absorption and scatter, the reconstruction of the CLT sources is always converted to an ill-posed linear system which is hard to be solved. In this work, the sparse nature of the light source was taken into account and the preconditioning orthogonal matching pursuit (POMP) method was established to effectively reduce the ill-posedness and obtain better reconstruction accuracy. To prove the accuracy and speed of this algorithm, a heterogeneous numerical phantom experiment and an in vivo mouse experiment were conducted. Both the simulation result and the mouse experiment showed that our reconstruction method can provide more accurate reconstruction result compared with the traditional Tikhonov regularization method and the ordinary orthogonal matching pursuit (OMP) method. Our reconstruction method will provide technical support for the biological application for Cerenkov luminescence.

  1. Luminescent lanthanide reporters: new concepts for use in bioanalytical applications.

    Science.gov (United States)

    Vuojola, Johanna; Soukka, Tero

    2014-01-23

    Lanthanides represent the chemical elements from lanthanum to lutetium. They intrinsically exhibit some very exciting photophysical properties, which can be further enhanced by incorporating the lanthanide ion into organic or inorganic sensitizing structures. A very popular approach is to conjugate the lanthanide ion to an organic chromophore structure forming lanthanide chelates. Another approach, which has quickly gained interest, is to incorporate the lanthanide ions into nanoparticle structures, thus attaining improved specific activity and a large surface area for biomolecule immobilization. Lanthanide-based reporters, when properly shielded from the quenching effects of water, usually express strong luminescence emission, multiple narrow emission lines covering a wide wavelength range, and exceptionally long excited state lifetimes enabling time-gated luminescence detection. Because of these properties, lanthanide-based reporters have found widespread applications in various fields of life. This review focuses on the field of bioanalytical applications. Luminescent lanthanide reporters and assay formats utilizing these reporters pave the way for increasingly sensitive, simple, and easily automated bioanalytical applications.

  2. Luminescent lanthanide reporters: new concepts for use in bioanalytical applications

    International Nuclear Information System (INIS)

    Vuojola, Johanna; Soukka, Tero

    2014-01-01

    Lanthanides represent the chemical elements from lanthanum to lutetium. They intrinsically exhibit some very exciting photophysical properties, which can be further enhanced by incorporating the lanthanide ion into organic or inorganic sensitizing structures. A very popular approach is to conjugate the lanthanide ion to an organic chromophore structure forming lanthanide chelates. Another approach, which has quickly gained interest, is to incorporate the lanthanide ions into nanoparticle structures, thus attaining improved specific activity and a large surface area for biomolecule immobilization. Lanthanide-based reporters, when properly shielded from the quenching effects of water, usually express strong luminescence emission, multiple narrow emission lines covering a wide wavelength range, and exceptionally long excited state lifetimes enabling time-gated luminescence detection. Because of these properties, lanthanide-based reporters have found widespread applications in various fields of life. This review focuses on the field of bioanalytical applications. Luminescent lanthanide reporters and assay formats utilizing these reporters pave the way for increasingly sensitive, simple, and easily automated bioanalytical applications. (topical review)

  3. The effect of Bi3+ and Li+ co-doping on the luminescence characteristics of Eu3+-doped aluminum oxide films

    International Nuclear Information System (INIS)

    Padilla-Rosales, I.; Martinez-Martinez, R.; Cabañas, G.; Falcony, C.

    2015-01-01

    The incorporation of Bi 3+ and Li + as co-dopants in Eu 3+ -doped aluminum oxide films deposited by the ultrasonic spray pyrolysis technique and its effect on the luminescence characteristics of this material are described. Both Bi 3+ and Li + do not introduce new luminescence features but affect the luminescence intensity of the Eu 3+ related emission spectra as well as the excitation spectra. The introduction of Bi 3+ generates localized states in the aluminum oxide host that result in a quenching of the luminescence intensity, while Li + and Bi 3+ co-doping increase the luminescence intensity of these films. - Highlights: • Li and Bi co-doping increase the luminescence. • Bi creates localized states in the Al 2 O 3 host. • Li was incorporated as a co-activator

  4. The effect of Bi{sup 3+} and Li{sup +} co-doping on the luminescence characteristics of Eu{sup 3+}-doped aluminum oxide films

    Energy Technology Data Exchange (ETDEWEB)

    Padilla-Rosales, I., E-mail: ipadilla@cinvestav.mx [Centro de Investigación y de Estudios Avanzados del IPN, Nanociencias y Nanotecnología, Av. IPN 2508, Col. San Pedro Zacatenco, CP 07360 México D.F. (Mexico); Martinez-Martinez, R. [Instituto de Física y Matemáticas, Universidad Tecnológica de la Mixteca, Carretera a Acatlima Km. 2.5, CP 69000 Huajuapan de León, Oax, México (Mexico); Cabañas, G. [Centro de Investigación y de Estudios Avanzados del IPN, Nanociencias y Nanotecnología, Av. IPN 2508, Col. San Pedro Zacatenco, CP 07360 México D.F. (Mexico); Falcony, C. [Centro de Investigación y de Estudios Avanzados del IPN, Departamento de Física, Av. IPN 2508, Col. San Pedro Zacatenco, CP 07360 México D.F. (Mexico)

    2015-09-15

    The incorporation of Bi{sup 3+} and Li{sup +} as co-dopants in Eu{sup 3+}-doped aluminum oxide films deposited by the ultrasonic spray pyrolysis technique and its effect on the luminescence characteristics of this material are described. Both Bi{sup 3+} and Li{sup +} do not introduce new luminescence features but affect the luminescence intensity of the Eu{sup 3+} related emission spectra as well as the excitation spectra. The introduction of Bi{sup 3+} generates localized states in the aluminum oxide host that result in a quenching of the luminescence intensity, while Li{sup +} and Bi{sup 3+} co-doping increase the luminescence intensity of these films. - Highlights: • Li and Bi co-doping increase the luminescence. • Bi creates localized states in the Al{sub 2}O{sub 3} host. • Li was incorporated as a co-activator.

  5. Luminescence spectroscopy and microscopy applied to study gem materials: a case study of C centre containing diamonds

    Science.gov (United States)

    Hainschwang, Thomas; Karampelas, Stefanos; Fritsch, Emmanuel; Notari, Franck

    2013-06-01

    The methods of luminescence spectroscopy and microscopy are widely used for the analysis of gem materials. This paper gives an overview of the most important applications of the analysis of laser and UV excited luminescence by spectroscopy and visually by microscopy with emphasis on diamond, and specifically natural type Ib diamond, little studied so far. Luminescence based techniques are paramount to the gemmological analysis of diamond, in order to determine whether it is natural, treated or synthetic. The great sensitivity of luminescence helps detect some emitting centres that are undetectable by any other analytical method. Hence, especially for diamond, luminescence is an enabling technology, as illustrated by its pioneering use of imagery for the separation of natural and synthetic diamond, and of spectroscopy for the detection of High Pressure-High Temperature treatment. For all other gemstones the applications are at the moment less numerous, but nevertheless they remain highly important. They provide quickly information on the identification of a gem material, and its treatment. Besides the study of broad band emissions caused by various colour centres, the typical PL-causing trace elements (amongst others) are chromium, manganese, uranium and rare earth elements. In pearls the study of broad band luminescence can be useful, and particularly the study of pink to red porphyrin luminescence in pearls from certain species such as Pinctada and Pteria and others can help identify the pearl-producing mollusc, or if a pearl has been dyed or not. Type Ib diamonds are representative of the importance and complexity of the analysis of luminescence by microscopy and spectroscopy. They show a wide range of sometimes very complex emissions that result in luminescence colours from green to yellow to orange or red. These emissions show generally very inhomogeneous distribution. They are caused by a range of defects, however only a few of them are well characterized.

  6. Supramolecular luminescence from oligofluorenol-based supramolecular polymer semiconductors.

    Science.gov (United States)

    Zhang, Guang-Wei; Wang, Long; Xie, Ling-Hai; Lin, Jin-Yi; Huang, Wei

    2013-11-13

    Supramolecular luminescence stems from non-covalent exciton behaviors of active π-segments in supramolecular entities or aggregates via intermolecular forces. Herein, a π-conjugated oligofluorenol, containing self-complementary double hydrogen bonds, was synthesized using Suzuki coupling as a supramolecular semiconductor. Terfluorenol-based random supramolecular polymers were confirmed via concentration-dependent nuclear magnetic resonance (NMR) and dynamic light scattering (DLS). The photoluminescent spectra of the TFOH-1 solution exhibit a green emission band (g-band) at approximately ~520 nm with reversible features, as confirmed through titration experiments. Supramolecular luminescence of TFOH-1 thin films serves as robust evidence for the aggregates of g-band. Our results suggest that the presence of polyfluorene ketone defects is a sufficient condition, rather than a sufficient-necessary condition for the g-band. Supramolecular electroluminescence will push organic devices into the fields of supramolecular optoelectronics, spintronics, and mechatronics.

  7. Persistent luminescence in nitride and oxynitride phosphors: A review

    Science.gov (United States)

    Smet, Philippe F.; Botterman, Jonas; Van den Eeckhout, Koen; Korthout, Katleen; Poelman, Dirk

    2014-09-01

    The research field of persistent luminescence has experienced a strong growth in the past two decades, with a steady development of new materials and applications. Here we give an overview of the recent progress in a specific class of host materials, namely oxynitride and nitride persistent phosphors. These are interesting hosts to explore because of their unique characteristics, such as chemical stability and tunability of the emission over the entire visible range upon doping with divalent europium. To yield persistent luminescence however, co-dopants have to be added or the synthesis conditions have to be adjusted. Specific materials, such as Ca2Si5N8:Eu,Tm and BaSi2O2N2:Eu, are highlighted and their properties are put into the context of emerging applications such as in vivo imaging and pressure sensing via mechanoluminescence. Finally, directions for future research are given.

  8. Luminescence response of synthetic opal under femtosecond laser pumping

    International Nuclear Information System (INIS)

    Vasnetsov, M.V.; Bazhenov, V.Yu.; Dmitruk, I.N.; Kudryavtseva, A.D.; Tcherniega, N.V.

    2015-01-01

    Synthetic opal is an artificial photonic metamaterial composed from spherical globules of amorphous silica (SiO 2 ) about 300 nm in diameter. We report, for the first time to our knowledge, the origin of a narrow luminescence spectral peak (4 nm HWHM) and optical second and third harmonic generation in synthetic opal samples under femtosecond laser excitation (800 nm) at liquid-nitrogen temperature. Stimulated-emission effects are discussed related to the possibility of nanocavity lasing at the condition of the first Mie resonance in a dielectric sphere. - Highlights: • Second harmonic generation in a synthetic opal (amorphous material composed from spherical SiO 2 globules) was observed. • Narrow luminescence peak which we assign to a Mie resonance in a globule was detected at liquid-nitrogen temperature

  9. Ion beam induced luminescence characterisation of CVD diamond films

    Energy Technology Data Exchange (ETDEWEB)

    Bettiol, A.A.; Gonon, P.; Jamieson, D.N. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

    1996-12-31

    The characterisation of the band structure properties of materials and devices by ion microprobe techniques has been made possible at the Melbourne MeV ion microprobe facility with the development of Ion Beam Induced Luminescence (IBIL). A number of diamond films grown by Microwave Plasma Chemical Vapour Deposition (MPCVD) on silicon substrates are analysed. A preliminary study of the luminescence properties of these samples has revealed information not previously obtainable via traditional microprobe techniques. The optical effects of incorporating dopants during the deposition process is determined using IBIL. The presence of trace element impurities introduced during growth is examined by Particle Induced X-ray Emission (PIXE), and a measurement of the film thickness is made using Rutherford Backscattering Spectrometry (RBS). 7 refs., 2 figs.

  10. Luminescent Properties of Oxazine 170 Perchlorate Doped PMMA Fiber

    Directory of Open Access Journals (Sweden)

    Piotr Miluski

    2017-04-01

    Full Text Available The article presents fabrication and luminescent properties of poly(methyl methacrylate (PMMA fiber doped by Oxazine 170 perchlorate. The bright fluorescence of polymeric fiber (at molar fluorescent organic dye concentration 4.3 × 10−5 was characterized in terms of spectrum and signal attenuation vs. the fiber length. The significant changes in fluorescence spectrum (λmax red shift average slope 4.6 nm/cm and Full Width at Half Maximum (FWHM increasing slope 6.7 nm/cm have been noticed for the length of the fiber (0.02–0.08 m which corresponds to a high overlapping region of absorption and emission spectra of used dye. The red shift of λmax (c.a. 80 nm was presented in fabricated polymeric fiber at distance 0.85 m. The obtained characteristics can be used for luminescent properties optimization of fluorescent organic-dye-doped PMMA fiber.

  11. Thermally stimulated luminescence and photoluminescence ...

    Indian Academy of Sciences (India)

    2012-01-13

    Jan 13, 2012 ... Peltier cooled photo-multiplier tube as detector (Jain et al. 2008). The acquisition and analysis of the data were carried out by F-900 software supplied by Edinburgh Analytical. Instruments, UK. Thermally stimulated luminescence (TSL) glow curves were recorded using home-built unit between. 300 and ...

  12. Advances in luminescence instrument systems

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.; Bulur, E.; Duller, G.A.T.

    2000-01-01

    We report on recent advances in the development of luminescence measurement systems and techniques at Riso. These include: (1) optical stimulation units based on new-generation powerful blue light (470 nm) emitting diodes providing up to 28 mW/cm(2) for OSL measurements; (2) an infrared (830 nm...

  13. Hydrothermal synthesis, characterization and luminescent ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Hydrothermal synthesis, characterization and luminescent properties of lanthanide-doped NaLaF 4 nanoparticles. JIGMET LADOL HEENA KHAJURIA SONIKA KHAJURIA HAQ NAWAZ SHEIKH. Volume 39 Issue 4 August 2016 pp 943-952 ...

  14. Limit of detection of a fiber optics gyroscope using a super luminescent radiation source

    CERN Document Server

    Sandoval, G E

    2003-01-01

    The main objective of this work is to establish the dependence of characteristics of the fiber optics gyroscope (FOG) with respect to the parameters of the super luminescent emission source based on doped optical fiber with rare earth elements (Super luminescent Fiber Source, SFS), argument the pumping rate election of the SFS to obtain characteristics limits of the FOG sensibility. By using this type of emission source in the FOG is recommend to use the rate when the direction of the pumping signal coincide with the super luminescent signal. The most results are the proposition and argumentation of the SFS election as emission source to be use in the FOG of the phase type. Such a decision allow to increase the characteristics of the FOG sensibility in comparison with the use of luminescent source of semiconductors emission which are extensively used in the present time. The use of emission source of the SFS type allow to come closer to the threshold of the obtained sensibility limit (detection limit) which i...

  15. Limit of detection of a fiber optics gyroscope using a super luminescent radiation source

    International Nuclear Information System (INIS)

    Sandoval R, G.E.; Nikolaev, V.A.

    2003-01-01

    The main objective of this work is to establish the dependence of characteristics of the fiber optics gyroscope (FOG) with respect to the parameters of the super luminescent emission source based on doped optical fiber with rare earth elements (Super luminescent Fiber Source, SFS), argument the pumping rate election of the SFS to obtain characteristics limits of the FOG sensibility. By using this type of emission source in the FOG is recommend to use the rate when the direction of the pumping signal coincide with the super luminescent signal. The most results are the proposition and argumentation of the SFS election as emission source to be use in the FOG of the phase type. Such a decision allow to increase the characteristics of the FOG sensibility in comparison with the use of luminescent source of semiconductors emission which are extensively used in the present time. The use of emission source of the SFS type allow to come closer to the threshold of the obtained sensibility limit (detection limit) which is determined with the shot noise. (Author)

  16. Esplenomegalia gigante en la leucemia linfocítica crónica

    Directory of Open Access Journals (Sweden)

    José Luis González González

    Full Text Available La leucemia linfocítica crónica constituye la forma de leucemia más frecuente en el mundo occidental; sus síntomas más frecuentes son la aparición de adenopatías, el cansancio, la pérdida de peso y aquellos derivados de las infecciones y del síndrome anémico. Aunque es una de las enfermedades que rara vez son tributarias de una esplenectomía por hiperesplenismo, es una entidad frecuente en hematología y debe ser del dominio y conocimiento del cirujano general. Presentamos un paciente con una esplenomegalia de proporciones gigantes, de inusual aparición.

  17. Hepatocarcinoma gigante unifocal en mujer con ingesta prolongada de anticonceptivos hormonales: ¿casualidad o causalidad?

    Directory of Open Access Journals (Sweden)

    VICTOR MANUEL LOPEZ MOURIÑO

    2016-12-01

    Full Text Available Presentamos un caso de una paciente de mediana edad con ingesta mantenida de anticonceptivos hormonales (AH que desarrolla múltiples adenomas hepáticos (asociación bien documentada y un carcinoma hepatocelular (CHC unifocal gigante sin encontrar otros factores de riesgo para el mismo (enolismo, tabaquismo, cirrosis, hemocromatosis,..... Si bien en la literatura no hay unanimidad respecto a la asociación del consumo de AH con el CHC, algunos autores ya contemplaron esa posibilidad, excluyendo también otras etiologías reconocidas de CHC, por lo que debería reevaluarse si su asociación es aleatoria o por el contrario existe nexo causal.

  18. Unusual AIP mutation and phenocopy in the family of a young patient with acromegalic gigantism

    Directory of Open Access Journals (Sweden)

    Syed Ali Imran

    2018-01-01

    Full Text Available Early-onset acromegaly causing gigantism is often associated with aryl-hydrocarbon-interacting receptor protein (AIP mutation, especially if there is a positive family history. A15y male presented with tiredness and visual problems. He was 201 cm tall with a span of 217 cm. He had typical facial features of acromegaly, elevated IGF-1, secondary hypogonadism and a large macroadenoma. His paternal aunt had a history of acromegaly presenting at the age of 35 years. Following transsphenoidal surgery, his IGF-1 normalized and clinical symptoms improved. He was found to have a novel AIP mutation destroying the stop codon c.991T>C; p.*331R. Unexpectedly, his father and paternal aunt were negative for this mutation while his mother and older sister were unaffected carriers, suggesting that his aunt represents a phenocopy.

  19. Intraspecific competition and high food availability are associated with insular gigantism in a lizard

    Science.gov (United States)

    Pafilis, Panayiotis; Meiri, Shai; Foufopoulos, Johannes; Valakos, Efstratios

    2009-09-01

    Resource availability, competition, and predation commonly drive body size evolution. We assess the impact of high food availability and the consequent increased intraspecific competition, as expressed by tail injuries and cannibalism, on body size in Skyros wall lizards ( Podarcis gaigeae). Lizard populations on islets surrounding Skyros (Aegean Sea) all have fewer predators and competitors than on Skyros but differ in the numbers of nesting seabirds. We predicted the following: (1) the presence of breeding seabirds (providing nutrients) will increase lizard population densities; (2) dense lizard populations will experience stronger intraspecific competition; and (3) such aggression, will be associated with larger average body size. We found a positive correlation between seabird and lizard densities. Cannibalism and tail injuries were considerably higher in dense populations. Increases in cannibalism and tail loss were associated with large body sizes. Adult cannibalism on juveniles may select for rapid growth, fuelled by high food abundance, setting thus the stage for the evolution of gigantism.

  20. A Gigantic, Exceptionally Complete Titanosaurian Sauropod Dinosaur from Southern Patagonia, Argentina

    Science.gov (United States)

    Lacovara, Kenneth J.; Lamanna, Matthew C.; Ibiricu, Lucio M.; Poole, Jason C.; Schroeter, Elena R.; Ullmann, Paul V.; Voegele, Kristyn K.; Boles, Zachary M.; Carter, Aja M.; Fowler, Emma K.; Egerton, Victoria M.; Moyer, Alison E.; Coughenour, Christopher L.; Schein, Jason P.; Harris, Jerald D.; Martínez, Rubén D.; Novas, Fernando E.

    2014-01-01

    Titanosaurian sauropod dinosaurs were the most diverse and abundant large-bodied herbivores in the southern continents during the final 30 million years of the Mesozoic Era. Several titanosaur species are regarded as the most massive land-living animals yet discovered; nevertheless, nearly all of these giant titanosaurs are known only from very incomplete fossils, hindering a detailed understanding of their anatomy. Here we describe a new and gigantic titanosaur, Dreadnoughtus schrani, from Upper Cretaceous sediments in southern Patagonia, Argentina. Represented by approximately 70% of the postcranial skeleton, plus craniodental remains, Dreadnoughtus is the most complete giant titanosaur yet discovered, and provides new insight into the morphology and evolutionary history of these colossal animals. Furthermore, despite its estimated mass of about 59.3 metric tons, the bone histology of the Dreadnoughtus type specimen reveals that this individual was still growing at the time of death. PMID:25186586

  1. Cordoma Sacrococcígeo gigante: relato de caso Giant Sacrococcygeal chordoma: case report

    Directory of Open Access Journals (Sweden)

    Tiago Leal Ghezzi

    2009-06-01

    Full Text Available Cordoma sacrococcígeo é uma neoplasia maligna rara que se origina de remanescentes da notocorda. A localização crítica, comportamento localmente agressivo, reconhecida resistência à radioterapia, significativa morbimortalidade cirúrgica e elevada taxa de recidiva tornam seu tratamento um desafio. Descrevemos um caso de cordoma sacrococcígeo gigante.Sacrococcygeal chordoma is a rare malignant neoplasm arised from the remmants of the notochord. The critical localization, locally aggressive behavior, well-known resistance to radiation therapy, meaningful surgical morbimortality and increased recurrence rate become its treatment a challenge. We describe a case of a giant unresectable sacrococcygeal chordoma.

  2. Can oxygen set thermal limits in an insect and drive gigantism?

    Directory of Open Access Journals (Sweden)

    Wilco C E P Verberk

    Full Text Available BACKGROUND: Thermal limits may arise through a mismatch between oxygen supply and demand in a range of animal taxa. Whilst this oxygen limitation hypothesis is supported by data from a range of marine fish and invertebrates, its generality remains contentious. In particular, it is unclear whether oxygen limitation determines thermal extremes in tracheated arthropods, where oxygen limitation may be unlikely due to the efficiency and plasticity of tracheal systems in supplying oxygen directly to metabolically active tissues. Although terrestrial taxa with open tracheal systems may not be prone to oxygen limitation, species may be affected during other life-history stages, particularly if these rely on diffusion into closed tracheal systems. Furthermore, a central role for oxygen limitation in insects is envisaged within a parallel line of research focussing on insect gigantism in the late Palaeozoic. METHODOLOGY/PRINCIPAL FINDINGS: Here we examine thermal maxima in the aquatic life stages of an insect at normoxia, hypoxia (14 kPa and hyperoxia (36 kPa. We demonstrate that upper thermal limits do indeed respond to external oxygen supply in the aquatic life stages of the stonefly Dinocras cephalotes, suggesting that the critical thermal limits of such aquatic larvae are set by oxygen limitation. This could result from impeded oxygen delivery, or limited oxygen regulatory capacity, both of which have implications for our understanding of the limits to insect body size and how these are influenced by atmospheric oxygen levels. CONCLUSIONS/SIGNIFICANCE: These findings extend the generality of the hypothesis of oxygen limitation of thermal tolerance, suggest that oxygen constraints on body size may be stronger in aquatic environments, and that oxygen toxicity may have actively selected for gigantism in the aquatic stages of Carboniferous arthropods.

  3. Mielolipoma gigante bilateral da glândula adrenal Bilateral giant adrenal myelolipoma

    Directory of Open Access Journals (Sweden)

    Gisele Alborghetti Nai

    2007-08-01

    Full Text Available Mielolipomas são tumores benignos relativamente raros, freqüentemente associados à glândula adrenal. Geralmente são não-funcionantes, assintomáticos e medem menos de 5 cm. Mielolipomas adrenais bilaterais e gigantes são raros. Relatamos o primeiro caso de mielolipoma gigante bilateral da glândula adrenal da literatura latino-americana: paciente do sexo feminino, 57 anos, com queixa de dor no flanco esquerdo. A tomografia computadorizada do abdome mostrou massas bilaterais da glândula adrenal, medindo a direita 9 x 7 x 6,5 cm e a esquerda 23 x 19 x 8 cm. As massas eram radiologicamente consistentes com tecido adiposo. O diagnóstico pré-operatório foi de lipossarcoma. A paciente foi submetida à laparotomia com retirada das massas. O exame microscópico diagnosticou mielolipomas bilaterais. Embora sejam tumores benignos, seu tratamento deve ser cirúrgico, pois somente o exame anatomopatológico pode descartar uma neoplasia maligna.Myelolipomas are relatively rare benign tumors, frequently associated with the adrenal glands. Usually, they are non-functioning, asymptomatic and measure less than 5 cm. Bilateral giant adrenal myelolipomas are rare. We report the first case of bilateral giant adrenal myelolipomas of the Latin American literature: a 57-year old woman who presented with left abdominal pain. The computed tomography scanning revealed bilateral suprarenal masses measuring 9 x 7 x 6.5 cm on the right and 23 x 19 x 8 cm on the left. The masses were radiographically consistent with fatty tissue. The preoperative diagnosis was liposarcoma. Surgery was performed with excision of the masses. The histologic analysis identified bilateral adrenal myelolipomas. Although they are benign tumors, surgery must be performed because only the histologic analysis can exclude malignancy.

  4. Luminescent hybrid materials based on (8-hydroxyquinoline)-substituted metal-organic complexes and lead-borate glasses

    Science.gov (United States)

    Petrova, Olga B.; Anurova, Maria O.; Akkuzina, Alina A.; Saifutyarov, Rasim R.; Ermolaeva, Ekaterina V.; Avetisov, Roman I.; Khomyakov, Andrew V.; Taydakov, Ilya V.; Avetissov, Igor Ch.

    2017-07-01

    Novel luminescent organic-inorganic hybrid materials based on 8-hydroxyquinoline metal complexes (Liq, Kq, Naq, Rbq, Mgq2, Srq2, Znq2, Scq3, Alq3, Gaq3, and Inq3) have been synthesized by a high temperature exchange reaction with 80PbF2-20B2O3 inorganic low-melting glass. The mechanical and optical properties, transmission spectra, emission an excitation photoluminescence, and luminescence kinetic of hybrid materials were studied. All hybrid materials showed a wide luminescence band in the range 400-700 nm.

  5. Mechanism of luminescent emission in BaY{sub 2}F{sub 8} scintillators doped with rare earths; Mecanismos de emissao luminescente nos cintiladores de BaY{sub 2}F{sub 8} dopado com terras raras

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Ana Carolina de Mello

    2013-07-01

    In this work samples of Barium Yttrium Fluoride (BaY{sub 2}F{sub 8}-BaYF) doped with different concentrations of Tb{sup 3+}, Er{sup 3+}, Tm{sup 3+} e Nd{sup 3+} ions were characterized, aiming their application in radiation detection devices using their scintillating properties. Two types of samples were produced, polycrystalline samples, obtained via solid state reaction and single crystals, obtained via the floating zone melting method. The radioluminescence measurements (RL) revealed that the samples doped with 2.0 or 3.0 % Tb showed RL intensity at 545 nm two times higher than samples of CsI:Tl, although the total scintillation yield was smaller when compared to this commercial scintillator. Thermoluminescence (TL) results showed that all doped samples exhibited the same peak at 123°C, which is characteristic of the matrix (BaY{sub 2}F{sub 2}). Comparison of the areas under the TL and RL curves for Tb{sup 3+} and Nd{sup 3+} doped BaYF revealed that the trapping centers are competing with the scintillation of the samples. However, this was not true for the Er{sup 3+} and Tm{sup 3+} doped samples and it was found that the scintillation yield is independent of the trap concentration up to a certain concentration limit. From this point on, the scintillation yields started increasing as the trap concentration increased. The radiation damage defects in BaYF:Tb{sup 3+} were studied via optical absorption (OA) and correlated with TL, showing that trapping centers are connected to the color centers. All samples exhibited different luminescence decay processes with time constants ranging from microseconds, for the fast processes, milliseconds, for the intermediate ones, and phosphorescent processes with decay time on the order of seconds. For the Nd{sup 3+} doped samples, very fast decay process was also found with time constants of about 60ns and that is an indication that this material can be used in fast detection systems, although its scintillation efficiency was

  6. Enhanced quantum cutting luminescence by Au nanorods through improving radiative transition rate

    Science.gov (United States)

    Zheng, Biao; Lin, Lin; Feng, Zhuohong; Huang, Lili; Zhuang, Luoqing; Wang, Zhezhe; Zheng, Zhiqiang

    2017-11-01

    Quantum cutting (QC) phosphor β-NaYF4:Tb3+, Yb3+ nanoparticles (NPs) are decorated with Au nanorods (NRs). By tailoring Au NRs longitudinal plasmon resonance to match the emission wavelength of Yb3+ ion, plasmon-enhanced near-infrared (NIR) QC luminescence is achieved through improving Yb3+ ion's radiative transition rate. The decay curves of Yb3+ ion in β-NaYF4:Tb3+, Yb3+ NPs decorated with Au NRs further confirm the improvement of radiative transition rate. The influence of Au NRs concentration on QC luminescence is also investigated, and the results show that the optimal concentration of Au NRs is 0.12% with the maximum enhancement factor about 3. Our study may not only path the way to achieve simultaneous excitation and emission enhancement of QC luminescence, but also provide a potential application as QC layer to silicon-based solar cells.

  7. Metal-enhanced luminescence: Current trend and future perspectives- A review

    Energy Technology Data Exchange (ETDEWEB)

    Ranjan, Rajeev [Laboratory of Bioluminescent Biotechnologies, Department of Biophysics, Institute of Fundamental Biology and Biotechnology, Siberian Federal University, 79 Svobodny Prospect, Krasnoyarsk 660041 (Russian Federation); Esimbekova, Elena N., E-mail: esimbekova@yandex.ru [Laboratory of Bioluminescent Biotechnologies, Department of Biophysics, Institute of Fundamental Biology and Biotechnology, Siberian Federal University, 79 Svobodny Prospect, Krasnoyarsk 660041 (Russian Federation); Institute of Biophysics SB RAS, Federal Research Center “Krasnoyarsk Science Center SB RAS”, Akademgorodok 50/50, Krasnoyarsk 660036 (Russian Federation); Kirillova, Maria A. [Laboratory of Bioluminescent Biotechnologies, Department of Biophysics, Institute of Fundamental Biology and Biotechnology, Siberian Federal University, 79 Svobodny Prospect, Krasnoyarsk 660041 (Russian Federation); Kratasyuk, Valentina A. [Laboratory of Bioluminescent Biotechnologies, Department of Biophysics, Institute of Fundamental Biology and Biotechnology, Siberian Federal University, 79 Svobodny Prospect, Krasnoyarsk 660041 (Russian Federation); Institute of Biophysics SB RAS, Federal Research Center “Krasnoyarsk Science Center SB RAS”, Akademgorodok 50/50, Krasnoyarsk 660036 (Russian Federation)

    2017-06-08

    Optically enhanced biosensing strategies are prerequisites for developing miniature and highly sensitive multiplexed analytical platforms. Such smart biosensing systems are highly promising for use in the fields of biomedicine and environmental monitoring. Optical signal enhancement during bioassays is attributed to the complex opto-electronic interactions of incoming photonic signals at the nanomaterial interface. Research on the use of metals other than gold and silver for such purposes tends to extend the spectral window to observe luminescence enhancement effects. Such manifold increase in luminescence may be explained by the principles of plasmon coupling, directional emission led high collection efficiency, Rayleigh scattering and related opto-electronic events. The present review begins with a mechanistic description of important phenomena associated with metal-induced luminescence enhancement, particularly focusing on the origin of metal-enhanced luminescence. This review further analyses the hybrid nanostructure capabilities responsible for maintaining unique opto-electronic properties during bio-functionalisation. Current research trends in this area, future scope of this field for designing useful bioassays and concluding remarks are then discussed. - Highlights: • Nanomaterials significantly differ from their bulk counterparts. • Strong and pronounced photophysical effects at the metal surface provide opportunities for designing novel biosensors. • Metal-enhanced luminescence increases the quantum yield of luminescent reactions. • Under optimal conditions, plasmon coupling enhances the optical effects at the nanometal surface.

  8. Superposition of the luminescence spectra of free and bound excitons in ZnP2-D48

    International Nuclear Information System (INIS)

    Stamov, Ion; Nemerenco, Lucretia; Ivanenco, Iurii; Syrbu, Nicolae

    2011-01-01

    The luminescence spectra of ZnP 2 tetragonal crystals doped Mn, Sn, Cd, Sb at 10 K emission lines of bound excitons is detected. In the spectra non-phonon emission lines of bound and free excitons and their phonon replicas is isolated. The emission lines by the levels of the axial center are described. The composition of the luminescence of free and bound excitons at the axial center is investigated. In the region of phonon replicas of free excitons observed enhancement of lines due to forbidden transitions involving the recombination of excitons. A model of optic recombination transitions of the axial centre is proposed

  9. Luminescence characterization of a sodium rich feldspar

    Energy Technology Data Exchange (ETDEWEB)

    Correcher, V.; Sanchez M, L. [CIEMAT, Av. Complutense 22, 28040 Madrid (Spain); Garcia G, J. [MNCN-CSIC, c/ J. Gutierrez Abascal 2, Madrid 28006 (Spain); Rivera, T. [CICATA-IPN, Av. Legaria 694, 11500 Mexico D.F. (Mexico)

    2006-07-01

    This paper reports on the radioluminescence (RL) and thermoluminescence (TL) properties of a sodium rich feldspar ((Na,K)[AlSi{sub 3}O{sub 8}]) with a mean molecular composition of orthoclase (Or) and albite (Ab) of Or{sub 1}Ab{sub 99}. Despite the complexity of the luminescence signals of the sample, it is possible to determine six different emission bands at about 300, 380, 420, 460, 550 and 680 nm. The 300 nm emission can be associated to structural defects related to the recombination process in which the Na{sup +} ion diffusion-limited is involved. The UV-blue emission band at (i) 380 nm is characteristic of mineral phases containing SiO{sub 4} tetrahedral and could be related to intrinsic defects in the lattice, (ii) the 420 nm band could be associated to the presence of Cu (II) ions placed next to the hole traps or the recombination on a centre formed from a hole-oxygen atom adjacent to two Al atoms (Al-O-Al) and (iii) the 460 nm waveband could be due to the presence of Ti{sup 4+}. The green and red emissions are respectively associated to the presence of Mn{sup 2+} and Fe{sup 3+} ions. The ratio between the relative intensities, peaked at 290 (the more intense waveband) and 550 nm is about 10:1 in both TL and RL; this fact indicates that the efficiency of recombination centres does no changes regardless on the type of the process. (Author)

  10. Luminescence properties of different Eu sites in LiMgPO4:Eu2+, Eu3+

    International Nuclear Information System (INIS)

    Baran, A; Mahlik, S; Grinberg, M; Cai, P; Kim, S I; Seo, H J

    2014-01-01

    The effect of temperature on the luminescence properties of LiMgPO 4 doped with Eu 3+ and Eu 2+ are presented. Depending on the excitation wavelength, luminescence spectra consist of two distinct broad emission bands peaking at 380 nm and 490 nm related to 4f 6 5d 1  → 4f 7 ( 8 S 7/2 ) luminescence of Eu 2+ and to europium-trapped exciton, respectively, and/or several sharp lines between the 580 nm and 710 nm region, ascribed to the 5 D 0  →  7 F J (J = 0, 1, 2, 3 and 4) transitions in Eu 3+ . To explain all the features of the Eu 2+ and Eu 3+ luminescence we discussed the existence of two different Eu sites substituting for Li + , with short and long distance compensation. The evident effect of increasing the intensity of the Eu 2+ luminescence with increasing temperature was observed. It was considered that the charge compensation mechanism for Eu 3+ and Li + as well as Eu 2+ replacing Li + in the LiMgPO 4 is a long distance compensation that allows for the existence of some of the europium ions either as Eu 3+ at low temperature or as Eu 2+ at high temperature. We concluded that Eu 2+ in the Li + site with long distance compensation yields only 4f 6 5d 1  → 4f 7 luminescence, whereas Eu 2+ in the Li + site with short distance compensation yields 4f 6 5d 1  → 4f 7 luminescence and europium-trapped exciton emission. (paper)

  11. Synthesis and luminescence properties of Eu -activated Ca4Mg5 ...

    Indian Academy of Sciences (India)

    Synthesis and luminescence properties of Eu. 2+. -activated Ca4Mg5(PO4)6 for blue-emitting ... Abstract. Ca4Mg5(PO4)6:Eu2+ blue-emitting phosphor was synthesized by the combustion-assisted synthesis method under reductive atmosphere. .... The asymmetric emission spec- trum shows that Eu2+ have more than one ...

  12. Luminescent properties of red-light-emitting phosphors CaWO4: Eu ...

    Indian Academy of Sciences (India)

    The crystal structures of these phosphors were characterized by powder X-ray diffraction, and the luminescent properties of Eu3+-, Li+-codoped CaWO4 were investigated by diffuse reflectance spectra, photoluminescence emission spectra, photoluminescence excitation spectra, and the Commission International de L' ...

  13. Luminescent properties of red-light-emitting phosphors CaWO 4

    Indian Academy of Sciences (India)

    The crystal structures of these phosphors were characterized by powder X-ray diffraction, and the luminescent properties of Eu3+-, Li+-codoped CaWO4 were investigated by diffuse reflectance spectra, photoluminescence emission spectra, photoluminescence excitation spectra, and the Commission International de L' ...

  14. Luminescence performance of Eu 3-doped lead-free zinc phosphate ...

    Indian Academy of Sciences (India)

    Events · Annual Meetings · Mid Year Meetings · Discussion Meetings · Public Lectures · Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Luminescence performance of Eu$^{3+}-doped lead-free zinc phosphate glasses for red emission.

  15. Formation mechanism and luminescence appearance of Mn-doped zinc silicate particles synthesized in supercritical water

    International Nuclear Information System (INIS)

    Takesue, Masafumi; Suino, Atsuko; Hakuta, Yukiya; Hayashi, Hiromichi; Smith, Richard Lee

    2008-01-01

    Luminescence appearance of Mn-doped zinc silicate (Zn 2 SiO 4 :Mn 2+ , ZSM) formed in supercritical water at 400 deg. C and 29 MPa at reaction times from 1 to 4320 min was studied in the relation to its phase formation mechanism. Appearance of luminescent ZSM from green emission by α-ZSM and yellow emission by β-ZSM occurred over the same time period during the onset of phase formation at a reaction time of 2 min. Luminescence appeared at a much lower temperature and at shorter reaction times than the conventional solid-state reaction. Needle-like-shaped α-ZSM was the most stable particle shape and phase in the supercritical water reaction environment and particles formed via two routes: a homogenous nucleation route and a heterogenous route that involves solid-state diffusion and recrystallization. - Graphical abstract: Luminescence appearance of Mn-doped zinc silicate (Zn 2 SiO 4 :Mn 2+ , ZSM) formed in supercritical water at 400 deg. C and 29 MPa were studied in the relation to its phase formation mechanism. Green emission by α-ZSM and yellow emission by β-ZSM occurred over the same time period during the onset of phase formation

  16. The luminescence of the scheelite NaBi(MoO4)2

    NARCIS (Netherlands)

    Mazurak, Zb.; Blasse, G.; Liebertz, J.

    The luminescent properties of the scheelite NaBi(MoO4)2 are reported. Below 50 K an efficient, red emission occurs. The results agree with those for other bismuth molybdates. The decay measurements indicate an energy level structure of the emitting state which is very similar to that in PbMoO4. The

  17. Nature of sub-band gap luminescent eigenmodes in a ZnO nanowire

    NARCIS (Netherlands)

    Rühle, S.|info:eu-repo/dai/nl/31407659X; van Vugt, L.K.|info:eu-repo/dai/nl/338773800; Li, H.-Y.; Keizer, N.A.; Kuipers, L.; Vanmaekelbergh, D.A.M.|info:eu-repo/dai/nl/304829137

    2008-01-01

    The emission spectrum of individual high-quality ZnO nanowires consists of a series of Fabry-Pérot-like eigenmodes that extend far below the band gap of ZnO. Spatially resolved luminescence spectroscopy shows that light is emitted predominantly at both wire ends, with identical spectra reflecting

  18. Luminescence properties of Ce3+ doped gadolinium-calcium-silicaborate glass scintillator

    International Nuclear Information System (INIS)

    Park, J.M.; Ha, D.H.; Kaewjeang, S.; Maghanemi, U.; Kothan, S.; Kaewkhao, J.; Kim, H.J.

    2016-01-01

    In this work, the Ce 3+ doped gadolinium-calcium-silicaborate glass scintillators of the composition ratio 25Gd 2 O 3 :10CaO:10SiO 2 :(55−x)B 2 O 3 :xCeF 3 , have been fabricated by using the melt-quenching technique. The doping concentration of the Ce 3+ was varied from 0.05 mol% to 2.5 mol%. The 4f-5d transition of the Ce 3+ allowed scintillation with a fast decay time. The absorption spectrum, X-ray induced emission spectrum, photo luminescence spectrum, laser luminescence spectrum and decay time of the scintillators were measured for studying the luminescence properties. From the X-ray induced emission spectrum result, we checked the trend between doping concentration and light yield. The laser induced luminescence spectrum was measured while changing the temperature from 300 K to 10 K. We also measured the decay time by using the laser excitation of the 0.15 mol% Ce 3+ doped glass scintillator. - Highlights: • Ce 3+ doped gadolinium-calcium-silicaborate glass scintillators were developed. • Glass is easily fabricated with large sizes and various doping materials. • The luminescence properties are studied by using various radiation sources. • The light yield and decay time were measured at low temperature. • One decay time component is found.

  19. Design, synthesis and characterization of a highly luminescent Eu-complex monomer featuring thenoyltrifluoroacetone and 5-acryloxyethoxymethyl-8-hydroxyquinoline

    Energy Technology Data Exchange (ETDEWEB)

    Xu Cunjin [State Key Laboratory of Chemical Engineering, Department of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou 310027 (China); College of Material, Chemistry and Chemical Engineering, Hangzhou Normal University, Hangzhou 310036 (China); Li Bogeng, E-mail: bgli@zju.edu.cn [State Key Laboratory of Chemical Engineering, Department of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou 310027 (China); Wan Jintao; Bu Zhiyang [State Key Laboratory of Chemical Engineering, Department of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou 310027 (China)

    2011-08-15

    A multi-functional ligand, 5-acryloxyethoxymethyl-8-hydroxyquinoline (Hamq), was synthesized, which contained a polymerizable C=C double bond for the copolymerization with other vinyl monomers and acted as photon antenna able to transfer energy to Eu{sup 3+} ions effectively. The triplet state energy of Hamq was determined to be 22,370 cm{sup -1} via the phosphorescence spectra of Hamq and its gadolinium complex. The title complex monomer Eu(tta){sub 2}(amq) was prepared by coordination reaction of Hamq with europium isopropoxide and 2-thenoyltrifluoroacetone (Htta) in dry organic solvents under argon atmosphere and characterized by elemental analysis and IR spectrum. The photophysical properties of the complex were studied in detail with UV-vis, luminescence spectra, luminescence lifetime and quantum yield. The complex exhibited nearly monochromatic red emission at 612 nm, a remarkable luminescence quantum yield at room temperature (30.6%) upon ligand excitation and a long {sup 5}D{sub 0} lifetime (389 {mu}s), which indicated that the ligand Hamq could sensitize the luminescence of Eu(III) ion efficiently in Eu(tta){sub 2}(amq), resulting in a strong luminescence of its copolymer poly[MMA-co-Eu(TTA){sub 2}(amq)] under UV excitation. The excellent luminescence properties of the complex made it not only a promising light-conversion molecular device but also an excellent luminescent monomer. - Highlights: >iWe designed and synthesized a highly luminescent Eu-complex monomer. > Quantum yield and lifetime of the complex are 30.6% and 389 {mu}s, respectively. > Excellent luminescence of the complex made it an excellent luminescent monomer.

  20. Luminescent Solar Concentrators – a low cost photovoltaics alternative

    NARCIS (Netherlands)

    Sark, W.G.J.H.M. van

    2013-01-01

    The development and current status of luminescent solar concentrators is reviewed. These solar concentrators generally consist of transparent polymer sheets doped with luminescent species; presently mainly organic dye molecules are used as luminescent species, however semiconductor nanocrystals

  1. Luminescence of LiH(D):Ru monocrystals

    International Nuclear Information System (INIS)

    Sabirzyanov, A.A.; Oparin, D.V.; Pilipenko, G.I.; Gavrilov, F.F.

    1993-01-01

    Luminescence of lithium hydride (deuteride) activated by ruthenium is recorded for the first time. The features connected with the structure and oscillations of the basic lattice are detected in luminescence spectrum. The qualitative model of luminescence spectrum is suggested

  2. Silica-modified luminescent LaPO4 :Eu@LaPO4 @SiO2 core/shell nanorods: Synthesis, structural and luminescent properties.

    Science.gov (United States)

    Ansari, Anees A

    2018-02-01

    Monoclinic-type tetragonal LaPO 4 :Eu (core) and LaPO 4 :Eu@LaPO 4 (core/shell) nanorods (NRs) were successfully prepared using a urea-based co-precipitation process under ambient conditions. An amorphous silica layer was coated around the luminescent core/shell NRs via the sol-gel process to improve their solubility and colloidal stability in aqueous and non-aqueous media. The prepared nano-products were systematically characterized by X-ray diffraction pattern, transmission electron microscopy, energy dispersive X-ray analysis, and FTIR, UV/Vis, and photoluminescence spectroscopy to examine their phase purity, crystal phase, surface chemistry, solubility and luminescence characteristics. The length and diameter of the nano-products were in the range 80-120 nm and 10-15 nm, respectively. High solubility of the silica-modified core/shell/Si NRs was found for the aqueous medium. The luminescent core NRs exhibited characteristic excitation and emission transitions in the visible region that were greatly affected by surface growth of insulating LaPO 4 and silica layers due to the multiphonon relaxation rate. Our luminescence spectral results clearly show a distinct difference in intensities for core, core/shell, and core/shell/Si NRs. Highly luminescent NRs with good solubility could be useful candidates for a variety of photonic-based biomedical applications. Copyright © 2017 John Wiley & Sons, Ltd.

  3. Material for a luminescent solar concentrator

    Science.gov (United States)

    Andrews, L.J.

    1984-01-01

    A material for use in a luminescent solar concentrator, formed by ceramitizing the luminescent ion Cr/sup 3 +/ with a transparent ceramic glass containing mullite. The resultant material has tiny Cr/sup 3 +/-bearing crystallites dispersed uniformly through an amorphous glass. The invention combines the high luminescent efficiency of Cr/sup 3 +/ in the crystalline phase with the practical and economical advantages of glass technology.

  4. Modern luminescence spectroscopy of minerals and materials

    CERN Document Server

    Gaft, Michael; Panczer, Gerard

    2005-01-01

    Luminescence Spectroscopy of Minerals and Materials presents an overview of the general concepts in luminescence spectroscopy as well as experimental methods and their interpretation. Special emphasis is laid on the fluorescence lifetime and the determination of time-resolved spectra. This method enables the exposure of new luminescence in minerals previously hidden by more intensive centers. Specialists in the fields of solid state physics, chemistry and spectroscopy will find a wealth of new information in this unique book.

  5. A portable luminescence dating instrument

    DEFF Research Database (Denmark)

    Kook, M.H.; Murray, A.S.; Lapp, Torben

    2011-01-01

    in both continuous wave and pulsed mode; photon counting can be gated such that it is active only during the pulse off-period. There are also two bleaching light sources (470nm, 5W and 940nm, 3W), and the luminescence signals can be regenerated using a cold-cathode 30kV X-ray tube, delivering ∼0.06Gy.s−1...

  6. Handbook of luminescent semiconductor materials

    CERN Document Server

    Bergman, Leah

    2011-01-01

    Photoluminescence spectroscopy is an important approach for examining the optical interactions in semiconductors and optical devices with the goal of gaining insight into material properties. With contributions from researchers at the forefront of this field, Handbook of Luminescent Semiconductor Materials explores the use of this technique to study semiconductor materials in a variety of applications, including solid-state lighting, solar energy conversion, optical devices, and biological imaging. After introducing basic semiconductor theory and photoluminescence principles, the book focuses

  7. Luminescence studies on phosphor screens

    International Nuclear Information System (INIS)

    Panayiotakis, G.; Nomikos, C.; Bakas, A.; Proimos, B.

    1994-01-01

    We report our results on x-ray phosphor screens prepared of some new materials focusing attention on their efficiency under fluoroscopy conditions, on optimization conditions and on comparisons among the various materials. All data are presented in absolute values. A theoretical model is presented, that takes into account the granular structure of the screens, permitting the explanation and prediction of the luminescence properties of the screens. (authors)

  8. Cherenkov luminescence measurements with digital silicon photomultipliers: a feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Ciarrocchi, Esther; Belcari, Nicola; Guerra, Alberto Del [Department of Physics, University of Pisa, Pisa (Italy); INFN, section of Pisa, Pisa (Italy); Cherry, Simon R. [Department of Biomedical Engineering, University of California, Davis, CA (United States); Lehnert, Adrienne; Hunter, William C. J.; McDougald, Wendy; Miyaoka, Robert S.; Kinahan, Paul E. [Department of Radiology, University of Washington, Seattle, WA (United States)

    2015-11-16

    A feasibility study was done to assess the capability of digital silicon photomultipliers to measure the Cherenkov luminescence emitted by a β source. Cherenkov luminescence imaging (CLI) is possible with a charge coupled device (CCD) based technology, but a stand-alone technique for quantitative activity measurements based on Cherenkov luminescence has not yet been developed. Silicon photomultipliers (SiPMs) are photon counting devices with a fast impulse response and can potentially be used to quantify β-emitting radiotracer distributions by CLI. In this study, a Philips digital photon counting (PDPC) silicon photomultiplier detector was evaluated for measuring Cherenkov luminescence. The PDPC detector is a matrix of avalanche photodiodes, which were read one at a time in a dark count map (DCM) measurement mode (much like a CCD). This reduces the device active area but allows the information from a single avalanche photodiode to be preserved, which is not possible with analog SiPMs. An algorithm to reject the noisiest photodiodes and to correct the measured count rate for the dark current was developed. The results show that, in DCM mode and at (10–13) °C, the PDPC has a dynamic response to different levels of Cherenkov luminescence emitted by a β source and transmitted through an opaque medium. This suggests the potential for this approach to provide quantitative activity measurements. Interestingly, the potential use of the PDPC in DCM mode for direct imaging of Cherenkov luminescence, as a opposed to a scalar measurement device, was also apparent. We showed that a PDPC tile in DCM mode is able to detect and image a β source through its Cherenkov radiation emission. The detector’s dynamic response to different levels of radiation suggests its potential quantitative capabilities, and the DCM mode allows imaging with a better spatial resolution than the conventional event-triggered mode. Finally, the same acquisition procedure and data processing could

  9. Origin of luminescence from ZnO/CdS core/shell nanowire arrays

    Science.gov (United States)

    Wang, Zhiqiang; Wang, Jian; Sham, Tsun-Kong; Yang, Shaoguang

    2014-07-01

    Chemical imaging, electronic structure and optical properties of ZnO/CdS nano-composites have been investigated using scanning transmission X-ray microscopy (STXM), X-ray absorption near-edge structure (XANES) and X-ray excited optical luminescence (XEOL) spectroscopy. STXM and XANES results confirm that the as-prepared product is ZnO/CdS core/shell nanowires (NWs), and further indicate that ZnS was formed on the surface of ZnO NWs as the interface between ZnO and CdS. The XEOL from ZnO/CdS NW arrays exhibits one weak ultraviolet (UV) emission at 375 nm, one strong green emission at 512 nm, and two broad infrared (IR) emissions at 750 and 900 nm. Combining XANES and XEOL, it is concluded that the UV luminescence is the near band gap emission (BGE) of ZnO; the green luminescence comes from both the BGE of CdS and defect emission (DE, zinc vacancies) of ZnO; the IR luminescence is attributed to the DE (bulk defect related to the S site) of CdS; ZnS contributes little to the luminescence of the ZnO/CdS NW arrays. Interestingly, the BGE and DE from oxygen vacancies of ZnO in the ZnO/CdS nano-composites are almost entirely quenched, while DE from zinc vacancies changes little.Chemical imaging, electronic structure and optical properties of ZnO/CdS nano-composites have been investigated using scanning transmission X-ray microscopy (STXM), X-ray absorption near-edge structure (XANES) and X-ray excited optical luminescence (XEOL) spectroscopy. STXM and XANES results confirm that the as-prepared product is ZnO/CdS core/shell nanowires (NWs), and further indicate that ZnS was formed on the surface of ZnO NWs as the interface between ZnO and CdS. The XEOL from ZnO/CdS NW arrays exhibits one weak ultraviolet (UV) emission at 375 nm, one strong green emission at 512 nm, and two broad infrared (IR) emissions at 750 and 900 nm. Combining XANES and XEOL, it is concluded that the UV luminescence is the near band gap emission (BGE) of ZnO; the green luminescence comes from both the

  10. Luminescent Organic Semiconducting Langmuir Monolayers.

    Science.gov (United States)

    Agina, Elena V; Mannanov, Artur A; Sizov, Alexey S; Vechter, Olga; Borshchev, Oleg V; Bakirov, Artem V; Shcherbina, Maxim A; Chvalun, Sergei N; Konstantinov, Vladislav G; Bruevich, Vladimir V; Kozlov, Oleg V; Pshenichnikov, Maxim S; Paraschuk, Dmitry Yu; Ponomarenko, Sergei A

    2017-05-31

    In recent years, monolayer organic field-effect devices such as transistors and sensors have demonstrated their high potential. In contrast, monolayer electroluminescent organic field-effect devices are still in their infancy. One of the key challenges here is to create an organic material that self-organizes in a monolayer and combines efficient charge transport with luminescence. Herein, we report a novel organosilicon derivative of oligothiophene-phenylene dimer D2-Und-PTTP-TMS (D2, tetramethyldisiloxane; Und, undecylenic spacer; P, 1,4-phenylene; T, 2,5-thiophene; TMS, trimethylsilyl) that meets these requirements. The self-assembled Langmuir monolayers of the dimer were investigated by steady-state and time-resolved photoluminescence spectroscopy, atomic force microscopy, X-ray reflectometry, and grazing-incidence X-ray diffraction, and their semiconducting properties were evaluated in organic field-effect transistors. We found that the best uniform, fully covered, highly ordered monolayers were semiconducting. Thus, the ordered two-dimensional (2D) packing of conjugated organic molecules in the semiconducting Langmuir monolayer is compatible with its high-yield luminescence, so that 2D molecular aggregation per se does not preclude highly luminescent properties. Our findings pave the way to the rational design of functional materials for monolayer organic light-emitting transistors and other optoelectronic devices.

  11. Optical stimulated luminescence (OSL) dating

    International Nuclear Information System (INIS)

    Banerjee, D.

    1999-01-01

    Since the pioneering work by Huntley et al. (1985), optical dating is being increasingly recognised as an important technique for establishing a time frame of deposition of sediments (Aitken, 1998). Optical dating differs from thermoluminescence (TL) dating in that visible/infrared light from lasers or LEDs (light-emitting-diodes) is used as a means of stimulation, in contrast to thermal stimulation. It has several advantages over TL dating: (i) the resetting of the OSL (optically stimulated luminescence) clock is more effective than that of TL clock; for sediments transported under water or in other situations where the sediment grains have undergone inhomogeneous bleaching, this property ensures that ages based on optical dating are generally more reliable than TL ages, (ii) the optical dating technique is non-destructive, and multiple readouts of the optical signal is possible; this feature has resulted in the development of single-aliquot and single-grain protocols (Murray and Wintle, 1999; Banerjee et al. 1999), (iii) the sample is not heated as in TL; thus, spurious luminescence is avoided and there is a significant reduction in blackbody radiation. Dating of materials which change phase on heating is also practical, and finally, (iv) thermal quenching of luminescence is negligible, allowing accurate estimation of kinetic parameters using standard techniques and providing access to deep OSL traps. This characteristic may be helpful in extending the limits of optical dating beyond the last 150 ka from a global point of view

  12. Synthesis and Features of Luminescent Bromo- and Iodohectorite Nanoclay Materials

    Directory of Open Access Journals (Sweden)

    Hellen Silva Santos

    2017-11-01

    Full Text Available The smectites represent a versatile class of clay minerals with broad usage in industrial applications, e.g., cosmetics, drug delivery, bioimaging, etc. Synthetic hectorite Na0.7(Mg5.5Li0.3[Si8O20](OH4 is a distinct material from this class due to its low-cost production method that allows to design its structure to match better the applications. In the current work, we have synthesized for the first time ever nanoclay materials based on the hectorite structure but with the hydroxyl groups (OH− replaced by Br− or I−, yielding bromohectorite (Br-Hec and iodohectorite (I-Hec. It was aimed that these materials would be used as phosphors. Thus, OH− replacement was done to avoid luminescence quenching by multiphonon de-excitation. The crystal structure is similar to nanocrystalline fluorohectorite, having the d001 spacing of 14.30 Å and 3 nm crystallite size along the 00l direction. The synthetic materials studied here show strong potential to act as host lattices for optically active species, possessing mesoporous structure with high specific surface area (385 and 363 m2 g−1 for Br-Hec and I-Hec, respectively and good thermal stability up to 800 °C. Both materials also present strong blue-green emission under UV radiation and short persistent luminescence (ca. 5 s. The luminescence features are attributed to Ti3+/TiIV impurities acting as the emitting center in these materials.

  13. Visible luminescence in polyaniline/(gold nanoparticle) composites

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Renata F. S. [Universidade Federal de Pernambuco, Pos-Graduacao em Ciencia de Materiais (Brazil); Andrade, Cesar A. S. [Universidade Federal de Pernambuco, Departamento de Bioquimica (Brazil); Santos, Clecio G. dos [Instituto de Educacao, Ciencia e Tecnologia de Pernambuco (Brazil); Melo, Celso P. de, E-mail: celso@df.ufpe.br [Universidade Federal de Pernambuco, Pos-Graduacao em Ciencia de Materiais (Brazil)

    2013-01-15

    We describe the use of solution chemistry methods to prepare polyaniline/(gold nanoparticles)-PANI/AuNPs-composites as colloidal particles that exhibit an intense green fluorescence after excitation in the ultraviolet region. Measurements of the relative fluorescence quantum yield indicate that the intensity of the observed luminescence of these nanocomposites is a few orders of magnitude higher than the corresponding fluorescence of either the isolated polymer or the pure AuNPs. Hence, cooperative effects between the conducting polymer chains and the metallic particles must dominate the emission behavior of these materials. Transmission electron microscopy reveals the existence of metal nanoparticle aggregates with sizes in the 2-3 nm range dispersed in the polymer matrix. By implementing an experimental planning, we have been able to change the preparation parameters so as to vary in a controlled manner the intensity and the profile of the luminescence spectrum as well as the size and aggregation characteristics of the colloidal particles. We also show that when the pH of the medium is varied, the dielectric properties (such as the degree of conductivity) of the PANI/AuNPs colloidal solutions and the intensity of their luminescence change in a consistent manner. Due to the polycation nature of the doped PANI chains, we suggest that these composites may find interesting applications as fluorescent markers of biologic molecules.

  14. Discuss on luminescence dose data analysis technology

    International Nuclear Information System (INIS)

    Ma Xinhua; Xiao Wuyun; Ai Xianyun; Shi Zhilan; Liu Ying

    2009-01-01

    This article describes the development of luminescence dose data measurement and processing technology. General design planning of luminescence dose data measurement and processing technology is put forward with the diverse demands. The emphasis is focused on dose data processing method, luminescence curve analysis method, using of network, mechanics of communication among computers, data base management system of individual dose in this paper. The main methods and skills used in this technology as well as their advantages are also discussed. And it offers general design references for development luminescence dose data processing software. (authors)

  15. Monitoring Delamination of Thermal Barrier Coatings During Interrupted High-Heat-Flux Laser Testing using Luminescence Imaging

    Science.gov (United States)

    Eldridge, Jeffrey I.; Zhu, Dongming; Wolfe, Douglas E.

    2011-01-01

    This presentation showed progress made in extending luminescence-base delamination monitoring to TBCs exposed to high heat fluxes, which is an environment that much better simulates actual turbine engine conditions. This was done by performing upconversion luminescence imaging during interruptions in laser testing, where a high-power CO2 laser was employed to create the desired heat flux. Upconverison luminescence refers to luminescence where the emission is at a higher energy (shorter wavelength) than the excitation. Since there will be negligible background emission at higher energies than the excitation, this methods produces superb contrast. Delamination contrast is produced because both the excitation and emission wavelengths are reflected at delamination cracks so that substantially higher luminescence intensity is observed in regions containing delamination cracks. Erbium was selected as the dopant for luminescence specifically because it exhibits upconversion luminescence. The high power CO2 10.6 micron wavelength laser facility at NASA GRC was used to produce the heat flux in combination with forced air backside cooling. Testing was performed at a lower (95 W/sq cm) and higher (125 W/sq cm) heat flux as well as furnace cycling at 1163C for comparison. The lower heat flux showed the same general behavior as furnace cycling, a gradual, "spotty" increase in luminescence associated with debond progression; however, a significant difference was a pronounced incubation period followed by acceleration delamination progression. These results indicate that extrapolating behavior from furnace cycling measurements will grossly overestimate remaining life under high heat flux conditions. The higher heat flux results were not only accelerated, but much different in character. Extreme bond coat rumpling occurred, and delamination propagation extended over much larger areas before precipitating macroscopic TBC failure. This indicates that under the higher heat flux (and

  16. Luminescent hybrid materials functionalized with lanthanide ethylenodiaminotetraacetate complexes containing β-diketonate as antenna ligands

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Franklin P.; Costa, Israel F.; Espínola, José Geraldo P.; Faustino, Wagner M.; Moura, Jandeilson L. [Departamento de Química-Universidade Federal da Paraíba, 58051-970 João Pessoa, PB (Brazil); Brito, Hermi F.; Paolini, Tiago B. [Departamento de Química Fundamental-Instituto de Química da Universidade de São Paulo, 05508-900 São Paulo, SP (Brazil); Felinto, Maria Cláudia F.C. [Instituto de Pesquisas energéticas e Nucleares-IPEN, 05508-900 São Paulo, SP (Brazil); Teotonio, Ercules E.S., E-mail: teotonioees@quimica.ufpb.br [Departamento de Química-Universidade Federal da Paraíba, 58051-970 João Pessoa, PB (Brazil)

    2016-02-15

    Three organic–inorganic hybrid materials based on silica gel functionalized with (3-aminopropyl)trimethoxysilane (APTS), [3-(2-aminoetilamino)-propil]-trimetoxissilano (DAPTS) and 3-[2-(2-aminoetilamino)etilamino] propiltrimetoxysilane (TAPTS) and subsequently modified with EDTA derivative were prepared by nonhomogeneous route and were then characterized. The resulting materials named SilXN-EDTA (X=1 for APTS, 2 for DAPTS and 3 for TAPTS) were used to obtain new lanthanide Ln{sup 3+}-β-diketonate (Ln{sup 3+}=Eu{sup 3+}, Gd{sup 3+} and Tb{sup 3+}) complexes covalently linked to the functionalized silica gel surfaces (named SilXN-EDTALn-dik, dik=tta, dbm, bzac and acac). The photophysical properties of the new luminescent materials were investigated and compared with those with similar system presenting water molecules coordinated to the lanthanide ions, SilXN-EDTALn-H{sub 2}O. The SilXN-EDTAEu-dik and SilXN-EDTATb-dik systems displayed characteristic red and green luminescence when excited by UV radiation. Furthermore, the quantitative results showed that the emission quantum efficiency (η), experimental intensity parameters Ω{sub 2} and Ω{sub 4}, and Einstein's emission coefficient (A{sub 0J}) of the SilXN-EDTAEu-dik materials were largely dependent on the ligands. Based on the luminescence data, the most efficient intramolecular energy transfer processes were found to the SilXN-EDTAEu-dik (dik: tta and dbm) and SilXN-EDTATb-acac materials, which exhibited more pure emission colors. These materials are promising red and green phosphors, respectively. - Highlights: • New highly luminescent hybrid materials containing lanthanide-EDTA complexes. • The effect of three silylanting agent on the adsorption and luminescent properties has been studied. • The luminescence sensitizing by different β-diketonate ligands have been investigated.

  17. Highly luminescent Eu{sup 3+}-doped benzenetricarboxylate based materials

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Ivan G.N. [Departamento de Química Fundamental, Instituto de Química da Universidade de São Paulo, Av. Prof. Lineu Prestes 748, São Paulo 05508-900, SP (Brazil); Mustafa, Danilo, E-mail: dmustafa@iq.usp.br [Departamento de Química Fundamental, Instituto de Química da Universidade de São Paulo, Av. Prof. Lineu Prestes 748, São Paulo 05508-900, SP (Brazil); Andreoli, Bruno [Departamento de Química Fundamental, Instituto de Química da Universidade de São Paulo, Av. Prof. Lineu Prestes 748, São Paulo 05508-900, SP (Brazil); Felinto, Maria C.F.C. [Centro de Química do Meio Ambiente, Instituto de Pesquisas Energéticas e Nucleares, Av. Prof. Lineu Prestes 2242, São Paulo 05508-000, SP (Brazil); Malta, Oscar L. [Departamento de Química Fundamental, Universidade Federal de Pernambuco, Av. Prof. Moraes Rego, 1235, Recife 50670-90, PE (Brazil); Brito, Hermi F., E-mail: hefbrito@iq.usp.br [Departamento de Química Fundamental, Instituto de Química da Universidade de São Paulo, Av. Prof. Lineu Prestes 748, São Paulo 05508-900, SP (Brazil)

    2016-02-15

    [RE(TMA)] anhydrous complexes (RE{sup 3+}: Y, Gd and Lu) present high red emission intensity with a quantum efficiency (~45%) for the [Y(TMA):Eu{sup 3+}] complexes, due to the absence of non-radioactive decay pathways mediated by water molecules. The complexes were prepared in mild conditions. All the compounds are crystalline and thermostable up to 460 °C. Phosphorescence data of the complexes with Y, Gd and Lu show that the T{sub 1} state of the TMA{sup 3−} anion has energy higher than the {sup 5}D{sub 0} emitting level of the Eu{sup 3+} ion, indicating that the ligand can act as an intramolecular energy sensitizer. The photoluminescence properties of the doped materials were studied based on the excitation and emission spectra and luminescence decay curves. The experimental intensity parameters (Ω{sub λ}), lifetimes (τ), radiative (A{sub rad}) and non-radiative (A{sub nrad}) decay rates were determined and discussed. - Highlights: • Highly luminescent Europium doped anhydrous complexes. • Efficient monochromatic red light conversion molecular devices (LCMDs). • High emission quantum efficiencies.

  18. Luminescent and magnetic properties of Fe{sub 3}O{sub 4}@SiO{sub 2}:phen:Eu{sup 3+}

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Raphael Lucas de Sousa; Figueiredo, Alberthmeiry Teixeira de; Barrado, Cristiano Morita, E-mail: alberth@ufg.br [Universidade Federal de Goiás (UFG), Catalão, GO (Brazil). Departamento de Química; Sousa, Marcelo Henrique [Universidade de Brasília (UnB), DF (Brazil). Faculdade de Ceilândia

    2017-10-15

    Magnetite was doped with rare earth ions (europium) to produce core-shell materials with both magnetic and luminescent properties, i.e., a magnetic Fe{sub 3}O{sub 4} oxide core and a SiO{sub 2} :phen:Eu{sup 3+} shell. The resulting material was analyzed by X-ray powder diffraction and transmission electron microscopy, and subjected to magnetic and luminescence emission measurements. All the synthesized materials exhibited superparamagnetic behavior and luminescence emission. The magnetic behavior of Fe{sub 3}O{sub 4} and luminescence emission of SiO{sub 2} :phen:Eu{sup 3+} of the materials were compared to precursors. (author)

  19. Size, shape, and composition of luminescent species in oxidized Si nanocrystals and H-passivated porous Si

    Science.gov (United States)

    Schuppler, S.; Friedman, S. L.; Marcus, M. A.; Adler, D. L.; Xie, Y.-H.; Ross, F. M.; Chabal, Y. J.; Harris, T. D.; Brus, L. E.; Brown, W. L.; Chaban, E. E.; Szajowski, P. F.; Christman, S. B.; Citrin, P. H.

    1995-08-01

    Near-edge and extended x-ray-absorption fine-structure measurements from a wide variety of oxidized Si nanocrystals and H-passivated porous Si samples, combined with electron microscopy, ir absorption, forward recoil scattering, and luminescence emission data, provide a consistent structural picture of the species responsible for the luminescence observed in these systems. For porous Si samples whose luminescence wavelengths peak in the visible region, i.e., at <700 nm, their mass-weighted-average structures are determined here to be particles (not wires) whose short-range character is crystalline and whose dimensions-typically <15 Å-are significantly smaller than previously reported or proposed. Results are also presented which demonstrate that the observed visible luminescence is not related to either a photo-oxidized Si species in porous Si or an interfacial suboxide species in the Si nanocrystals. The structural and compositional findings reported here depend only on sample luminescence behavior, not on how the luminescent particles are produced, and thus have general implications in assigning quantum confinement as the mechanism responsible for the visible luminescence observed in both nanocrystalline and porous silicon.

  20. Redox reactions and mechanism of luminescence in BaFCl:Eu

    CERN Document Server

    Upadeo, S V; Gundurao, T K

    1998-01-01

    The phenomenon of stimulable luminescence of phosphors pre-irradiated with high-energy radiation is widely used in the field of imaging. Phosphors such as BaFX:Eu (X = Cl, Br) are extensively used in x-ray screens for digital image processing. There is, however, divided opinion regarding the mechanism responsible for the luminescence process in these materials. In this paper we have discussed the role of Eu sup 3 sup +reversible Eu sup 2 sup + conversion in BaFCl:Eu phosphor using PL, TL, TL emission and ESR techniques. (author)

  1. Radiation-induced luminescence from dry and hydrated DNA and related macromolecules

    International Nuclear Information System (INIS)

    Al-Kazwini, A.T.; O'Neill, P.; Fielden, E.M.; Adams, G.E.

    1988-01-01

    The radiation-induced luminescence from three types of fibrous DNA and a series of polydeoxynucleotides was measured under vacuum or in the presence of oxygen at 77 and 293K. The in-pulse emission spectra, generated by electrons with energies 50% water by wt (1.2:1 w/w, H 2 O/DNA), the in-pulse luminescence spectrum is similar to that of dry DNA. These findings are discussed in terms of energy or charge migration induced in DNA upon irradiation and the possible effects of conformational changes, caused by hydration, on charge migration. (author)

  2. Chiral nematic mesoporous films of ZrO₂:Eu³⁺: new luminescent materials.

    Science.gov (United States)

    Chu, Guang; Feng, Jing; Wang, Yu; Zhang, Xiao; Xu, Yan; Zhang, Hongjie

    2014-11-07

    Integration of luminescent rare earth ions and iridescence into a zirconium oxide photonic material is attractive for the design of new optical devices. The free-standing chiral nematic mesoporous films of ZrO2:Eu(3+) are assembled by a hard-templating approach using nanocrystalline cellulose-templated silica. The ZrO2:Eu(3+) films show tunable optical properties. The chiral nematic structured ZrO2:Eu(3+) exhibits selective suppression of the spontaneous emission of Eu(3+) and the capability to modulate the lifetime of luminescent Eu(3+).

  3. Strongly Enhanced Free-Exciton Luminescence in Microcrystalline CsPbBr3 Films

    Science.gov (United States)

    Kondo, Shin-ichi; Kakuchi, Mitsugu; Masaki, Atsushi; Saito, Tadaaki

    2003-07-01

    The luminescence properties of CsPbBr3 films prepared via the amorphous phase by crystallization are dominated by free-exciton emission, and only a weak trace of emission due to trapped excitons was observed, in contrast to the case of bulk CsPbBr3 crystals. In particular, the films in the microcrystalline state show by more than an order of magnitude stronger free-exciton emission than in the polycrystalline state. The enhanced free-exciton emission is suggestive of excitonic superradiance.

  4. Thermoluminescence, luminescence optically stimulated and creation of defects in alkaline halogenides contaminated with Europium

    International Nuclear Information System (INIS)

    Barboza F, M.

    1999-01-01

    The alkaline halogenides have been subject matter of investigations related with the search of sensor materials for X-ray bidimensional images or optical memories. The understanding of the damage formation processes generated by ionizing and non-ionizing radiations is important for the correct design of devices that working as detectors and dosemeters of both type of radiations. In this work we present the investigation results related with the defects produced by the ionizing radiation type X and ultraviolet light in the range of 200-360 nm in crystals of KCl: Eu 2+ and KBr:Eu 2+ . It is examined the thermoluminescence and luminescence spectra with the purpose of identifying the exciton processes, owing to the excitation of the halogenide ions in which the primary defects correspond to the F and H centers. It has been found that the 400-600 nm emission is associated with the luminescence type that in his turn can be associated with autotrapped excitons perturbed by the impurity. On the other hand, it is examined the emission spectra of the luminescence optically stimulated in crystals of KBr: Eu 2+ and KCl: Eu 2+ finding too that such materials would be used as optical memories susceptible of to store information, and through of photostimulation to read this. It was determined that the F centers participate in the luminescence optically stimulated in these crystals, as well as too in the recombination processes responsible by the thermoluminescent emission. (Author)

  5. Discovery of gigantic molecular nanostructures using a flow reaction array as a search engine.

    Science.gov (United States)

    Zang, Hong-Ying; de la Oliva, Andreu Ruiz; Miras, Haralampos N; Long, De-Liang; McBurney, Roy T; Cronin, Leroy

    2014-04-28

    The discovery of gigantic molecular nanostructures like coordination and polyoxometalate clusters is extremely time-consuming since a vast combinatorial space needs to be searched, and even a systematic and exhaustive exploration of the available synthetic parameters relies on a great deal of serendipity. Here we present a synthetic methodology that combines a flow reaction array and algorithmic control to give a chemical 'real-space' search engine leading to the discovery and isolation of a range of new molecular nanoclusters based on [Mo(2)O(2)S(2)](2+)-based building blocks with either fourfold (C4) or fivefold (C5) symmetry templates and linkers. This engine leads us to isolate six new nanoscale cluster compounds: 1, {Mo(10)(C5)}; 2, {Mo(14)(C4)4(C5)2}; 3, {Mo(60)(C4)10}; 4, {Mo(48)(C4)6}; 5, {Mo(34)(C4)4}; 6, {Mo(18)(C4)9}; in only 200 automated experiments from a parameter space spanning ~5 million possible combinations.

  6. Presentación atípica de mixoma auricular gigante

    Directory of Open Access Journals (Sweden)

    Carlos Domínguez-Massa

    2018-01-01

    Full Text Available El mixoma es el tumor primario más frecuente del corazón, con presentación típica en la aurícula izquierda, siendo infrecuente en la aurícula derecha. Se presenta un caso de una mujer de 49 años que debutó con ascitis, realizándose ecografía abdominal en la que se descartó patología intraabdominal. Se realizó una tomografía axial computarizada en la que se objetivó tumoración gigante anclada en la pared libre de la aurícula derecha. Tras estudio con ecocardiografía, fue sometida a resección de dicha tumoración e implante de bioprótesis tricúspide, ya que se evidenció una severa dilatación anular e incompetencia valvular. El diagnóstico mediante la anatomía patológica fue compatible con mixoma auricular derecho, con bordes de resección libres. La evolución posterior fue satisfactoria, siendo dada de alta al noveno día postoperatorio.

  7. A Paleocene penguin from New Zealand substantiates multiple origins of gigantism in fossil Sphenisciformes.

    Science.gov (United States)

    Mayr, Gerald; Scofield, R Paul; De Pietri, Vanesa L; Tennyson, Alan J D

    2017-12-12

    One of the notable features of penguin evolution is the occurrence of very large species in the early Cenozoic, whose body size greatly exceeded that of the largest extant penguins. Here we describe a new giant species from the late Paleocene of New Zealand that documents the very early evolution of large body size in penguins. Kumimanu biceae, n. gen. et sp. is larger than all other fossil penguins that have substantial skeletal portions preserved. Several plesiomorphic features place the new species outside a clade including all post-Paleocene giant penguins. It is phylogenetically separated from giant Eocene and Oligocene penguin species by various smaller taxa, which indicates multiple origins of giant size in penguin evolution. That a penguin rivaling the largest previously known species existed in the Paleocene suggests that gigantism in penguins arose shortly after these birds became flightless divers. Our study therefore strengthens previous suggestions that the absence of very large penguins today is likely due to the Oligo-Miocene radiation of marine mammals.

  8. Respiratory evolution facilitated the origin of pterosaur flight and aerial gigantism.

    Directory of Open Access Journals (Sweden)

    Leon P A M Claessens

    Full Text Available Pterosaurs, enigmatic extinct Mesozoic reptiles, were the first vertebrates to achieve true flapping flight. Various lines of evidence provide strong support for highly efficient wing design, control, and flight capabilities. However, little is known of the pulmonary system that powered flight in pterosaurs. We investigated the structure and function of the pterosaurian breathing apparatus through a broad scale comparative study of respiratory structure and function in living and extinct archosaurs, using computer-assisted tomographic (CT scanning of pterosaur and bird skeletal remains, cineradiographic (X-ray film studies of the skeletal breathing pump in extant birds and alligators, and study of skeletal structure in historic fossil specimens. In this report we present various lines of skeletal evidence that indicate that pterosaurs had a highly effective flow-through respiratory system, capable of sustaining powered flight, predating the appearance of an analogous breathing system in birds by approximately seventy million years. Convergent evolution of gigantism in several Cretaceous pterosaur lineages was made possible through body density reduction by expansion of the pulmonary air sac system throughout the trunk and the distal limb girdle skeleton, highlighting the importance of respiratory adaptations in pterosaur evolution, and the dramatic effect of the release of physical constraints on morphological diversification and evolutionary radiation.

  9. Evolución de planetas gigantes y posibilidades de su detección directa

    Science.gov (United States)

    Brunini, A.; Benvenuto, O. G.

    Desde la reciente detección de planetas gigantes orbitando estrellas cercanas de tipo solar por medio de efecto Doppler, uno de los principales problemas, en cuanto al estudio de los sistemas planetarios extrasolares, se refiere a la posibilidad de obtener evidencia directa de su existencia. Esto parece ser factible gracias a que en un futuro cercano entrarán en operación algunos telescopios especialmente adecuados a estos propósitos. Por tal motivo, hemos comenzado desde hace un tiempo un esfuerzo en cuanto al estudio de la evolución planetaria. A tales efectos hemos adaptado el código de evolución estelar de nuestro Observatorio al caso planetario. Las principales diferencias entre el caso estelar y el planetario se encuentran en la ecuación de estado. A tales fines hemos incluído la reciente ecuación de estado de Saumon, Chabrier y Van Horn, las opacidades radiativas de Guillot et al., procesos de quema de Deuterio, etc. También se ha considerado la posible existencia de fases de hielo y roca en el interior planetario. Por el momento hemos despreciado los efectos de la rotación planetaria. Con este código hemos computado la evolución de planetas con masas desde 10 hasta 0.3 masas de Júpiter. Utilizando nuestros resultados numéricos discutimos la detectabilidad de estos objetos en condiciones realistas.

  10. A gigantic new dinosaur from Argentina and the evolution of the sauropod hind foot.

    Science.gov (United States)

    González Riga, Bernardo J; Lamanna, Matthew C; Ortiz David, Leonardo D; Calvo, Jorge O; Coria, Juan P

    2016-01-18

    Titanosauria is an exceptionally diverse, globally-distributed clade of sauropod dinosaurs that includes the largest known land animals. Knowledge of titanosaurian pedal structure is critical to understanding the stance and locomotion of these enormous herbivores and, by extension, gigantic terrestrial vertebrates as a whole. However, completely preserved pedes are extremely rare among Titanosauria, especially as regards the truly giant members of the group. Here we describe Notocolossus gonzalezparejasi gen. et sp. nov. from the Upper Cretaceous of Mendoza Province, Argentina. With a powerfully-constructed humerus 1.76 m in length, Notocolossus is one of the largest known dinosaurs. Furthermore, the complete pes of the new taxon exhibits a strikingly compact, homogeneous metatarsus--seemingly adapted for bearing extraordinary weight--and truncated unguals, morphologies that are otherwise unknown in Sauropoda. The pes underwent a near-progressive reduction in the number of phalanges along the line to derived titanosaurs, eventually resulting in the reduced hind foot of these sauropods.

  11. O serviço de enfermagem hospitalar - apresentando este gigante silencioso

    Directory of Open Access Journals (Sweden)

    Gisela Maria Schebella Souto de Moura

    2001-09-01

    Full Text Available O artigo focaliza a importância do serviço de enfermagem nas organizações de saúde, metaforizando sua grandeza com a expressão "gigante" e seu pouco reconhecimento pela comunidade através do termo "silencioso". A abrangência e a complexidade de seu funcionamento é pontual na efetividade dos processos de cuidado em saúde, no entanto, sua estrutura e organização é pouco conhecida pelos demais profissionais de saúde e quase que totalmente desconhecida pela comunidade. O serviço de enfermagem congrega grande contingente de pessoal com diferentes níveis de formação. O planejamento, organização, estrutura e funcionamento deste serviço seguem as diretrizes emanadas da Teoria Geral da Administração e os conhecimentos desta área têm sido cada vez mais utilizados para atingir as metas e objetivos almejados pelas instituições de saúde. O ensaio, contudo, não deixa de abordar questões sobre o foco no cliente e qualidade do atendimento, apontando para a necessidade de repensar o modelo administrativo adotado buscando sempre alternativas sistêmicas e contingenciais.

  12. Genetic drift and mutational hazard in the evolution of salamander genomic gigantism.

    Science.gov (United States)

    Mohlhenrich, Erik Roger; Mueller, Rachel Lockridge

    2016-12-01

    Salamanders have the largest nuclear genomes among tetrapods and, excepting lungfishes, among vertebrates as a whole. Lynch and Conery (2003) have proposed the mutational-hazard hypothesis to explain variation in genome size and complexity. Under this hypothesis, noncoding DNA imposes a selective cost by increasing the target for degenerative mutations (i.e., the mutational hazard). Expansion of noncoding DNA, and thus genome size, is driven by increased levels of genetic drift and/or decreased mutation rates; the former determines the efficiency with which purifying selection can remove excess DNA, whereas the latter determines the level of mutational hazard. Here, we test the hypothesis that salamanders have experienced stronger long-term, persistent genetic drift than frogs, a related clade with more typically sized vertebrate genomes. To test this hypothesis, we compared dN/dS and Kr/Kc values of protein-coding genes between these clades. Our results do not support this hypothesis; we find that salamanders have not experienced stronger genetic drift than frogs. Additionally, we find evidence consistent with a lower nucleotide substitution rate in salamanders. This result, along with previous work showing lower rates of small deletion and ectopic recombination in salamanders, suggests that a lower mutational hazard may contribute to genomic gigantism in this clade. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

  13. Divertículo sigmoideo gigante complicado en un paciente diabético

    Directory of Open Access Journals (Sweden)

    José Luis González González

    Full Text Available La divertículosis colónica es una entidad frecuente en los países occidentales y representa una de las primeras enfermedades gastrointestinales con mayor repercusión en cuanto a costos de salud. La prevalencia de esta dolencia aumenta con la edad, aproximadamente hasta un 50 % de los adultos mayores de 60 años la padecen. Se señala que una de las razones de este incremento es el bajo consumo de fibras en la dieta y una interacción compleja entre la fibra dietética, la estructura de la pared colónica y la motilidad intestinal. El divertículo gigante de colon (mayor de 4 cm es una entidad rara, hemos encontrado 156 publicados en la literatura. El presente caso es un paciente masculino de 47 años de edad con múltiples comorbilidades que hicieron su forma de presentación inusual y difícil su diagnóstico.

  14. Futures, fakes and discourses of the gigantic and miniature in ‘The World’ islands, Dubai

    Directory of Open Access Journals (Sweden)

    Pamila Gupta

    2015-11-01

    Full Text Available This article takes the “island” as a key trope in tourism studies, exploring how ideas of culture and nature, as well as those of paradise (lost are central to its interpretation for tourists and tourist industries alike. Increasingly, however, island tourism is blurring the line between geographies of land and water, continent and archipelago, and private and public property. The case of ‘The World’ islands mega project off the coast of Dubai (UAE is used to chart the changing face and future of island tourism, exploring how spectacle, branding and discourses of the gigantic, miniature, and fake, particularly alongside technological mediations on a large-scale, reflect the postmodern neoliberal world of tourism and the liquid times in which we live. Artificial island complexes such as this one function as cosmopolitan ‘non-places’ at the same time that they reflect a resurgence in (British nascent nationalism and colonial nostalgia, all the whilst operating in a sea of ‘junkspace’. The shifting cartography of ‘the island’ is thus mapped out to suggest new forms of place-making and tourism’s evolving relationship to these floating islandscapes.

  15. Broadened band C-telecom and intense upconversion emission of Er{sup 3+}/Yb{sup 3+} co-doped CaYAlO{sub 4} luminescent material obtained by an easy route

    Energy Technology Data Exchange (ETDEWEB)

    Perrella, R.V.; Schiavon, M.A. [Grupo de Pesquisa em Química de Materiais – (GPQM), Departamento de Ciências Naturais, Universidade Federal de São João del Rei (UFSJ), Campus Dom Bosco, Praça Dom Helvécio, 74, 36301-160 São João del Rei, MG (Brazil); Pecoraro, E.; Ribeiro, S.J.L. [UNESP, Institute of Chemistry, P.O. Box 355, 14800-970 Araraquara, SP (Brazil); Ferrari, J.L., E-mail: ferrari@ufsj.edu.br [Grupo de Pesquisa em Química de Materiais – (GPQM), Departamento de Ciências Naturais, Universidade Federal de São João del Rei (UFSJ), Campus Dom Bosco, Praça Dom Helvécio, 74, 36301-160 São João del Rei, MG (Brazil)

    2016-10-15

    This work reports on photoluminescence properties of Er{sup 3+}/Yb{sup 3+} co-doped CaYAlO{sub 4} in powder form, synthesized by an easy route using citric acid as ligand to form complex precursor. The 1.2 mol% of Yb{sup 3+} was fixed, while the amount of Er{sup 3+} changed in 0.5, 1.5 and 3 mol% in order to evaluate the photoluminescence properties as a function of the Er{sup 3+} concentration. The structural and thermal properties of the viscous solutions and powder materials obtained after the heat-treatment at 1000, 1100 and 1200 °C for 4 h were evaluated by XRD, FTIR and TG/DTA analysis. The results showed the formation of pure CaYAlO{sub 4} tetragonal crystalline phase after heat-treatment at 1100 °C and 1200 °C. Intense emission in the visible region under excitation at 980 nm was attributed to upconversion process, from Er{sup 3+} intra-configurational f–f transitions. The emissions were assigned to the transitions {sup 2}H{sub 11/2}→{sup 4}I{sub 15/2} and {sup 4}S{sub 3/2}→{sup 4}I{sub 15/2} (green region), and {sup 4}F{sub 9/2}→{sup 4}I{sub 15/2} (red region) energy levels. The ratio between emission band integrated areas assigned to the red and green emissions increased as a function of Er{sup 3+} concentration. Under excitation at 980 nm with 100 mW of power pump, the materials also showed intense and broadening emission with maximum at 1520 nm with FWHM of 84.74 nm for the sample CaYAlO{sub 4}:1.5% Er{sup 3+}/1.2% Yb{sup 3+} heat-treated at 1000 °C for 4 h. The photoluminescence properties showed that these materials are promising for use in C-telecom band as optical amplifier biological marker or/and solid-state laser devices under excitation at 980 nm.

  16. How do marine bacteria produce light, why are they luminescent, and can we employ bacterial bioluminescence in aquatic biotechnology?

    Directory of Open Access Journals (Sweden)

    Grzegorz Wêgrzyn

    2002-09-01

    Full Text Available Bioluminescence, the phenomenon of light production by living organisms, occurs in forms of life as various as bacteria, fungi and animals. Nevertheless, light-emitting bacteria are the most abundant and widespread of luminescent organisms. Interestingly, most species of such bacteria live in marine environments. In this article, the biochemical mechanism of bacterial luminescence and its genetic regulation are summarized. Although the biochemistry and genetics of light emission by cells have been investigated in detail, the biological role of bacterial luminescence has remained obscure. Here, we discuss recent discoveries that shed new light on this problem. Finally, we provide examples of how bacterial luminescence can be employed in marine biotechnology, especially in the detection of toxic and mutagenic pollution in aquatic environments.

  17. Light-emitting conjugated polymers with microporous network architecture: interweaving scaffold promotes electronic conjugation, facilitates exciton migration, and improves luminescence.

    Science.gov (United States)

    Xu, Yanhong; Chen, Long; Guo, Zhaoqi; Nagai, Atsushi; Jiang, Donglin

    2011-11-09

    Herein we report a strategy for the design of highly luminescent conjugated polymers by restricting rotation of the polymer building blocks through a microporous network architecture. We demonstrate this concept using tetraphenylethene (TPE) as a building block to construct a light-emitting conjugated microporous polymer. The interlocked network successfully restricted the rotation of the phenyl units, which are the major cause of fluorescence deactivation in TPE, thus providing intrinsic luminescence activity for the polymers. We show positive "CMP effects" that the network promotes π-conjugation, facilitates exciton migration, and improves luminescence activity. Although the monomer and linear polymer analogue in solvents are nonemissive, the network polymers are highly luminescent in various solvents and the solid state. Because emission losses due to rotation are ubiquitous among small chromophores, this strategy can be generalized for the de novo design of light-emitting materials by integrating the chromophores into an interlocked network architecture.

  18. Violet stimulated luminescence: geo- or thermochronometer?

    DEFF Research Database (Denmark)

    Ankjærgaard, Christina; Guralnik, Benny; Porat, N.

    2015-01-01

    The method of quartz optically stimulated luminescence (OSL) dating is widely used, but generally limited to the past ~0.1 million years (Ma) due to early saturation of the desired signal. Violet stimulated luminescence (VSL) of quartz has previously been shown as a promising alternative...

  19. Receptor-Targeted Luminescent Silver Bionanoparticles

    NARCIS (Netherlands)

    Bunschoten, Anton; Chin, Patrick T.K.; Buckle, Tessa; Linden, van der Marte; Barendregt, Arjan; Verheijen, Marcel A.; Leeuwen, van Fijs W.B.

    2016-01-01

    Luminescent Ag nanoclusters (Ag-NC) provide the next generation in bionanoparticles, wherein the luminescence (650 nm) and large Stokes shift of these inorganic nanoclusters are favorable for biological imaging. By combining these characteristics with those of human serum albumin (HSA; a protein

  20. Ultrafast spectral interferometry of resonant secondary emission from quantum wells: From Rayleigh scattering to coherent emission from biexcitons

    DEFF Research Database (Denmark)

    Birkedal, Dan; Shah, Jagdeep; Pfeiffer, L. N.

    1999-01-01

    Recent investigations of secondary emission from quantum well excitons following ultrafast resonant excitation have demonstrated an intricate interplay of coherent Rayleigh scattering and incoherent luminescence. We have very recently demonstrated that it is possible to isolate and time resolve t...

  1. Determination of uranium in sea and ocean waters by a luminescence method with laser excitation

    International Nuclear Information System (INIS)

    Preobrazhenskaya, E.B.; Gvgel, E.S.; Stepanov, A.V.

    1986-01-01

    This paper shows that it is possible to determine uranium insea and ocean waters by a luminescence method with laser excitation. Ocean waters with a low content of luminescent ingredients are analyzed directly by freezing at 77 K to eliminate the quenching effect of the chloride ion. The more polluted waters of inland seas are preferably analyzed at T = 293 K in 1 M H 3 PO 4 after the removal of chloride ions by distillation from a sample containing HNO 3 . The background effect is removed by time selection of the luminescent emission of the uranyl ion. Uranium contents were determined for water from the northwest Atlantic and the North and Baltic Seas

  2. The luminescence properties of the octahedral uranate group in oxides with perovskite structure, ch. 3

    International Nuclear Information System (INIS)

    Hair, J.Th.W. de

    1976-01-01

    This chapter describes how the luminescence properties of the octahedral uranate group are influenced by the chemical constitution of its environment. Especially the quenching temperature of the emission is very sensitive. It is stronger influenced by the nature of the neighbouring B cations in the [100] direction than by the A cations in the [111] direction. This variation of the quenching temperature as a function of the chemical constitution of the host lattice is discussed in terms of a configurational coordinate model. The luminescence properties of uranium-activated oxides A 2+ La 3+ B + B'O 6 are also discussed. Remarkably enough in SrLaNaWO 6 -U the luminescence originates from UO 2 2+ groups. (Auth.)

  3. Optically stimulated luminescence of natural NaCl mineral from Dead Sea exposed to gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Roman L, J.; Cruz Z, E. [UNAM, Instituto de Ciencias Nucleares, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Pina L, Y. I. [UNAM, Facultad de Ciencias, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Marcazzo, J., E-mail: jesus.roman@nucleares.unam.mx [Instituto de Fisica Arroyo Seco - UNICEN, Pinto 399, 7000 Tandil (Argentina)

    2016-10-15

    Luminescence properties such as radioluminescence, thermoluminescence and optically stimulated luminescence have been studied on natural sodium chloride (NaCl) for dosimetric purposes in retrospective dosimetry (Timar-Gabor et al., 2013; Druzhyna et al., 2016). In this work, the optically stimulated luminescence (Cw-OSL) emissions of natural salt minerals, collected from Dead Sea in summer of 2015, were studied. The Cw-OSL dose response of natural salt was analyzed in the range between 0.2 and 10 Gy gamma dose of {sup 60}Co. Samples exposed at 3 Gy exhibited good repeatability with a variation coefficient of 4.6%. The thermal stability of the Cw-OSL response was analyzed to different temperatures from 50 up to 250 degrees Celsius using a heating rate of 5 degrees Celsius. The results showed that the natural Dead Sea salt minerals could be applied as natural dosimeter of gamma radiation. (Author)

  4. The first example of intensive luminescence of LMCT state based on metal complexes in solution

    International Nuclear Information System (INIS)

    Lukova, G.V.; Vasil'ev, V.P.; Smirnov, V.A.; Huhn, W.

    2007-01-01

    A bridge complex rac-C 6 H 10 (IndH 4 ) 2 ZrC 2 , featuring a unique long-living luminescence in liquid solutions at 20 deg C, has been prepared for the first time by catalytic hydrogenation of bis-indinyl complex C 6 H 10 (Ind) 2 Zr 2 Cl 2 . It has been identified that quantum yields of luminescence of the complex solutions at room temperature are the greatest ones for the known compounds possessing emission states of charge transfer from ligand to metal. Linear correlations of quantum yield of metal complex luminescence in a solution with steric features of the solvent molecules have been detected for the first time [ru

  5. Electron traps in irradiated alkaline glasses at 77 K studied by stimulated luminescence

    International Nuclear Information System (INIS)

    Truong, T.B.

    1977-01-01

    The results of stimulated luminescence studies at 77 0 K on photoionized tryptophan or tyrosine in alkaline ices or on γ-irradiated alkaline ices reveal that (1) the luminescence emission results from neutralization of bleached electrons with parent cations whose concentration is much more dilute (10 -5 --10 -3 M) than that of the alkaline ions (10M); (2) spatial heterogeneous distribution of OH - exists prior to irradiation in alkaline ices. There are zones where OH - concentration is higher than in others; (3) complementary to the optical absorption and ESR techniques, the stimulated luminescence method can serve to identify negative species other than solvated electrons stabilized in alkaline ices, namely, H - and possibly O/sup

  6. Diffusion Raman et luminescence dans des aerogels de silice purs ou dopes Dy

    Science.gov (United States)

    Guerri, F.; Fabre, F.; Zwick, A.; Bournett, D.

    1994-02-01

    Light scattering studies of pure and Dy doped aerogels are presented. Careful examination of Stokes and anti-Stokes spectra allow the discrimination between Raman and luminescence processes. It is shown that in pure aerogels, scattered intensity is due to Raman processes only, and the density of vibrational states does not exhibit any singularity. The fractal properties of the structure imply modifications not only in the spectral distribution of the low frequency modes (usually labelled phonons and fractons) but alsoin the high frequency one, at least up to 600 cm-1. In Dy-doped dense silica, coupling between electronic and vibronic excitations is evidenced by the presence of anti-Stokes luminescence. In Dy-doped aerogels, the enlarged Dy3+ electronic levels, strongly coupled with vibrational states give rise to emission processes traducing the response of the sample as a whole, rather than resonant Raman scattering or luminescence processes.

  7. Near-infrared luminescence in perovskite BaSnO3 epitaxial films

    Science.gov (United States)

    Takashima, Hiroshi; Inaguma, Yoshiyuki

    2017-08-01

    Strong near-infrared luminescence under ultraviolet excitation was obtained in epitaxially grown BaSnO3 perovskite films. The films were grown on SrTiO3 (001) substrates by pulsed-laser deposition, and the crystallinity of the epitaxial growth was confirmed by X-ray diffraction and reflected high-energy electron diffraction. Near-infrared luminescence of the as-grown film showed a broad emission peak centered at 905 nm. The transparencies of the double-side-polished substrate with and without the film were about 70% at around 550 nm, suggesting that the transparency of the film itself is close to 100%. The preparation of epitaxial thin films with a strong near-infrared luminescence and a high transparency may open up applications for wavelength conversion in solar cells for realizing a higher efficiency.

  8. Novel luminescent soft materials of terpyridine-containing ionic liquids and europium(III).

    Science.gov (United States)

    Wang, Dongyue; Wang, Huifang; Li, Huanrong

    2013-07-10

    Herein, we describe novel luminescent soft materials via reaction of Eu(3+)-coordinated carboxyl functionalized ionic liquids with terpyridine-functionalized imidazolium salts that are built from an imidazolium ring substituted on one side with a terpyridine derivative and, on the opposite side, a paraffin chain of various lengths. The obtained materials are either pastelike substances or viscous fluids, depending on the anions of the carboxyl functionalized ionic liquids. The soft luminescent materials were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetry (TG), and luminescence spectroscopy. The soft materials show bright red emission irradiated with UV light, because of the energy transfer from terpyridine-functionalized imidazolium salts to the Eu(3+) ions. The absolute quantum yields of the materials were determined and the energy transfer efficiency was estimated according to the reported method.

  9. Europium incorporated in silica matrix obtained by sol-gel: luminescent materials

    Directory of Open Access Journals (Sweden)

    Nassar Eduardo José

    2003-01-01

    Full Text Available In this work we report some aspects of the chemistry involved in the preparation of modified silicon oxide by the sol-gel process. Europium III compounds were used as luminescent probe. An organic-inorganic hybrid was obtained by hydrolysis of tetraethylorthosilicate (TEOS and 3-aminopropyltriethoxysilane (APTS. The Eu III compounds were added in different ways. In the first, silica was prepared in the presence of Eu III, and in the second, Eu III was added on the silica surface. These materials were studied by luminescence, infrared spectroscopy and termogravimetric analysis. The results obtained for the hybrid material show different behavior for Eu III emission, which could be excited by the antenna effect and the influence of the surrounding in the luminescence quenching. The thermogravimetric data present different mass loss in samples to range temperature 50 - 150 °C. Thermogravimetric and infrared spectra showed that inorganic polymers incorporated the organic part.

  10. Optically stimulated luminescence of natural NaCl mineral from Dead Sea exposed to gamma radiation

    International Nuclear Information System (INIS)

    Roman L, J.; Cruz Z, E.; Pina L, Y. I.; Marcazzo, J.

    2016-10-01

    Luminescence properties such as radioluminescence, thermoluminescence and optically stimulated luminescence have been studied on natural sodium chloride (NaCl) for dosimetric purposes in retrospective dosimetry (Timar-Gabor et al., 2013; Druzhyna et al., 2016). In this work, the optically stimulated luminescence (Cw-OSL) emissions of natural salt minerals, collected from Dead Sea in summer of 2015, were studied. The Cw-OSL dose response of natural salt was analyzed in the range between 0.2 and 10 Gy gamma dose of 60 Co. Samples exposed at 3 Gy exhibited good repeatability with a variation coefficient of 4.6%. The thermal stability of the Cw-OSL response was analyzed to different temperatures from 50 up to 250 degrees Celsius using a heating rate of 5 degrees Celsius. The results showed that the natural Dead Sea salt minerals could be applied as natural dosimeter of gamma radiation. (Author)

  11. An alkaline one-pot reaction to synthesize luminescent Eu-BTC MOF nanorods, highly pure and water-insoluble, under room conditions

    Energy Technology Data Exchange (ETDEWEB)

    Medina-Velazquez, D. Y., E-mail: dyolotzin@correo.azc.uam.mx; Alejandre-Zuniga, B. Y.; Loera-Serna, S.; Ortiz, E. M. [Universidad Autónoma Metropolitana-Azcapotzalco, División de Ciencias Básicas e Ingeniería (Mexico); Morales-Ramirez, A. de J. [CIITEC IPN, Instituto Politécnico Nacional (Mexico); Garfias-Garcia, E. [Universidad Autónoma Metropolitana-Azcapotzalco, División de Ciencias Básicas e Ingeniería (Mexico); Garcia-Murillo, A. [CIITEC IPN, Instituto Politécnico Nacional (Mexico); Falcony, C. [Centro de Investigación y Estudios Avanzados, Departamento de Física (Mexico)

    2016-12-15

    The increasing demand for optoelectronic devices requires the development of luminescent materials with high luminescence efficiency and low energy demands, and the metalorganic frameworks (MOFs) with lanthanides ions offer great potential in this area. The metalorganic materials provide properties of flexibility, low density, low-cost methods of synthesis, and insolubility in water, which gives them an advantage over traditional phosphors. In this study, a benzenetricarboxylate ligand (BTC) with a Eu{sup 3+} MOF was synthesized, and its structural and luminescent properties were measured. The metalorganic compound was generated in a one-pot reaction from europium nitrate and trimesic acid precursors. Through characterization by X-ray diffraction powder, infrared spectroscopy, SEM structural characterization, and luminescent spectroscopy, the formation of Europium benzenetricarboxylate (Eu-BTC) MOF nanorods was tested and the calculated value was in the range of 30–60 nm. A red luminescent emission with high intensity was observed for all the procedures.

  12. Luminescence detection of irradiated foods

    International Nuclear Information System (INIS)

    Sanderson, D.C.W.

    1990-01-01

    The need for forensic tests to identify irradiated foods has been widely recognised at a time of growing international trade in such products and impending changes in UK and EEC legislation to control the process. This paper outlines the requirements for and of such tests, and discusses recent developments in luminescence approaches aimed at meeting the needs of public analysts, retailers and consumers. Detecting whether or not food has been irradiated, and if so to what dose, is one of the challenges which food irradiation poses to the scientist. (author)

  13. Near infrared and upconversion luminescence behaviour of Er3+/Yb3+ codoped boro-tellurite glasses

    Science.gov (United States)

    Maheshvaran, K.; Arunkumar, S.; Vijayakumar, R.; Marimuthu, K.

    2014-04-01

    The broadband NIR and upconversion luminescence behavior in a new series of Er3+/Yb3+ codoped TeO2-B2O3-SrO-BaO-Li2O-LiF glasses have been studied exciting at a wavelength of 980 nm using semiconductor laser. A broadband emission is observed from 1450 to 1650 nm with a full width at half maximum (FWHM) around 165 nm in 0.5wt% Yb3+ ion content E0.5YLTB glass. The radiative parameters such as transition probability (A), stimulated emission cross-section (σE), experimental and calculated branching ratios (βR), optical gain width (σp×FWHM) and radiative lifetime (τcal) have been calculated for the 4I13/2→4I15/2 NIR emission. Upconversion luminescence spectra of the prepared glasses have been studied and the ESA & ET processes have also been discussed and reported.

  14. Sensitization effects of supramolecular assemblies on the luminescence of terbium-ion prulifloxacin complexes

    Energy Technology Data Exchange (ETDEWEB)

    Wang Hong; Yi Chongyue; Li Xue; Fang Fang [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Yang Yajiang, E-mail: yjyang@mail.hust.edu.c [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2011-04-15

    Luminescence enhancement of terbium-ion prulifloxacin complexes (Tb(III)-PUFX) in supramolecular hydrogels formed by assembly of 1,3:2,4-di-O-benzylidene-D-sorbitol (DBS) was investigated by steady-state fluorescence, varying temperature fluorescence and time-resolved fluorescence. The luminescence images show that Tb(III)-PUFX were dispersed in the DBS gels. The luminescence intensity of Tb(III)-PUFX in the DBS gels was significantly increased in comparison with that in corresponding aqueous solutions. The varying temperature fluorescent spectra show that the luminescence intensity of Tb(III)-PUFX decreased with an increase in the temperature. This implies that the luminescence enhancement of Tb(III)-PUFX is related to the dissociation and the formation of the DBS assemblies. Time-resolved fluorescence measurements show slower rotational motion in DBS gels in comparison with that in the corresponding aqueous solutions. This may be ascribed to a unique microstructure of three-dimensional network formed by DBC aggregates, resulting in deactivation of the nonradiative relaxation. The images of field emission scanning electron microscopy and polarized optical microscopy indicate that the morphology of the DBS assemblies was not influenced upon addition of Tb(III)-PUFX to the DBS gels.

  15. Highly Water-Stable Lanthanide-Oxalate MOFs with Remarkable Proton Conductivity and Tunable Luminescence.

    Science.gov (United States)

    Zhang, Kun; Xie, Xiaoji; Li, Hongyu; Gao, Jiaxin; Nie, Li; Pan, Yue; Xie, Juan; Tian, Dan; Liu, Wenlong; Fan, Quli; Su, Haiquan; Huang, Ling; Huang, Wei

    2017-09-01

    Although proton conductors derived from metal-organic frameworks (MOFs) are highly anticipated for various applications including solid-state electrolytes, H 2 sensors, and ammonia synthesis, they are facing serious challenges such as poor water stability, fastidious working conditions, and low proton conductivity. Herein, we report two lanthanide-oxalate MOFs that are highly water stable, with so far the highest room-temperature proton conductivity (3.42 × 10 -3 S cm -1 ) under 100% relative humidity (RH) among lanthanide-based MOFs and, most importantly, luminescent. Moreover, the simultaneous response of both the proton conductivity and luminescence intensity to RH allows the linkage of proton conductivity with luminescence intensity. This way, the electric signal of proton conductivity variation versus RH will be readily translated to optical signal of luminescence intensity, which can be directly visualized by the naked eye. If proper lanthanide ions or even transition-metal ions are used, the working wavelengths of luminescence emissions can be further extended from visible to near infrared light for even wider-range applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Simulation of Eu3+ luminescence spectra of borosilicate glasses by molecular dynamics calculations

    International Nuclear Information System (INIS)

    De Bonfils, J.; Panczer, G.; De Ligny, D.; Champagnon, B.; Peuget, S.; Delaye, J. M.; Chaussedent, S.; Monteil, A.

    2008-01-01

    Simplified inactive rare-earths doped nuclear waste glasses have been obtained by molecular dynamics (MD) simulation in order to investigate the local structure around the rare-earth by luminescence studies. MD calculations were performed with modified Born-Mayer-Huggins potentials and three body angular terms representing Coulomb and covalent interactions. Atomic positions within the glasses are then determined. Simulations of luminescence spectra were then obtained by calculation of the ligand field parameters affecting each luminescent ion. Considering the C 2v symmetry, it is possible to calculate the radiative transition probabilities between the emitter level, 5 D o , and the splitted receptor levels, 7 F J (J=0-3) for each Eu 3+ ion. The simulated emission spectra are obtained by convolution of all the Eu 3+ ions contributions. A comparison with the experimental data issue from fluorescence line narrowing and micro-luminescence spectroscopies allowed us not only to validate the simulation of luminescence spectra from simulated environments, but also to confirm the presence and the identification of two major Eu 3+ sites distribution in the nuclear glasses thanks to spectra-structure correlations. (authors)

  17. Luminescence of the SrCl2:Pr crystals under high-energy excitation

    International Nuclear Information System (INIS)

    Antonyak, O.T.; Voloshinovskii, A.S.; Vistovskyy, V.V.; Stryganyuk, G.B.; Kregel, O.P.

    2014-01-01

    The present research was carried out in order to elucidate the mechanisms of energy transfer from the crystal lattice to Pr 3+ ions in SrCl 2 . The luminescence excitation and emission spectra as well as luminescence kinetics of the SrCl 2 :Pr single crystals containing 0.2 mol% Pr were investigated at 300 and 10 K using the vacuum ultraviolet (VUV) synchrotron radiation. The X-ray excited luminescence spectra of the SrCl 2 :Pr (C Pr =0.2 and 0.5 mol%) and SrCl 2 :Pr, K (C Pr =1.5 mol%; C K =1.5 mol%) crystals were studied at 294 and 80 K. Under optical excitation of the samples in the Pr 3+ absorption bands, there were observed five fast ultraviolet emissions assigned to the 4f 1 5d→4f 2 transitions, and two long-wave bands corresponding to the f–f transitions. Furthermore, the intrinsic emission bands of SrCl 2 were observed at 10 K. The X-ray excited luminescence spectrum of the SrCl 2 :Pr crystal containing 0.2 mol% Pr, besides intrinsic emission band near 400 nm, has got a long-wave band at about 490 nm of the Pr 3+ centers. There were not observed any emission bands of the Pr 3+ centers corresponding to the 4f 1 5d–4f 2 transitions in the X-ray excited luminescence spectrum of the SrCl 2 :Pr crystal. The possible mechanisms of energy transfer from the SrCl 2 matrix to the Pr 3+ centers are discussed. -- Highlights: • Spectral-luminescent properties of SrCl 2 :Pr have been investigated. • The identification of emission 4f–4f and 5d–4f bands of Pr 3+ ions was performed. • Adding of potassium prevents clustering of the Pr 3+ centers in the SrCl 2 :Pr, K crystals. • Under X-ray excitation at 80–300 K only Pr 3+ 4f–4f and intrinsic emission is observed

  18. Cerenkov luminescence imaging of medical isotopes.

    Science.gov (United States)

    Ruggiero, Alessandro; Holland, Jason P; Lewis, Jason S; Grimm, Jan

    2010-07-01

    The development of novel multimodality imaging agents and techniques represents the current frontier of research in the field of medical imaging science. However, the combination of nuclear tomography with optical techniques has yet to be established. Here, we report the use of the inherent optical emissions from the decay of radiopharmaceuticals for Cerenkov luminescence imaging (CLI) of tumors in vivo and correlate the results with those obtained from concordant immuno-PET studies. In vitro phantom studies were used to validate the visible light emission observed from a range of radionuclides including the positron emitters (18)F, (64)Cu, (89)Zr, and (124)I; beta-emitter (131)I; and alpha-particle emitter (225)Ac for potential use in CLI. The novel radiolabeled monoclonal antibody (89)Zr-desferrioxamine B [DFO]-J591 for immuno-PET of prostate-specific membrane antigen (PSMA) expression was used to coregister and correlate the CLI signal observed with the immuno-PET images and biodistribution studies. Phantom studies confirmed that Cerenkov radiation can be observed from a range of positron-, beta-, and alpha-emitting radionuclides using standard optical imaging devices. The change in light emission intensity versus time was concordant with radionuclide decay and was also found to correlate linearly with both the activity concentration and the measured PET signal (percentage injected dose per gram). In vivo studies conducted in male severe combined immune deficient mice bearing PSMA-positive, subcutaneous LNCaP tumors demonstrated that tumor-specific uptake of (89)Zr-DFO-J591 could be visualized by both immuno-PET and CLI. Optical and immuno-PET signal intensities were found to increase over time from 24 to 96 h, and biodistribution studies were found to correlate well with both imaging modalities. These studies represent the first, to our knowledge, quantitative assessment of CLI for measuring radiotracer uptake in vivo. Many radionuclides common to both nuclear

  19. Functional silk: colored and luminescent.

    Science.gov (United States)

    Tansil, Natalia C; Koh, Leng Duei; Han, Ming-Yong

    2012-03-15

    Silkworm silk is among the most widely used natural fibers for textile and biomedical applications due to its extraordinary mechanical properties and superior biocompatibility. A number of physical and chemical processes have also been developed to reconstruct silk into various forms or to artificially produce silk-like materials. In addition to the direct use and the delicate replication of silk's natural structure and properties, there is a growing interest to introduce more new functionalities into silk while maintaining its advantageous intrinsic properties. In this review we assess various methods and their merits to produce functional silk, specifically those with color and luminescence, through post-processing steps as well as biological approaches. There is a highlight on intrinsically colored and luminescent silk produced directly from silkworms for a wide range of applications, and a discussion on the suitable molecular properties for being incorporated effectively into silk while it is being produced in the silk gland. With these understanding, a new generation of silk containing various functional materials (e.g., drugs, antibiotics and stimuli-sensitive dyes) would be produced for novel applications such as cancer therapy with controlled release feature, wound dressing with monitoring/sensing feature, tissue engineering scaffolds with antibacterial, anticoagulant or anti-inflammatory feature, and many others. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Skin Friction Measurements Using Luminescent Oil Films

    Science.gov (United States)

    Husen, Nicholas M.

    As aircraft are designed to a greater extent on computers, the need for accurate and fast CFD algorithms has never been greater. The development of CFD algorithms requires experimental data against which CFD output can be validated and from which insight about flow physics can be acquired. Skin friction, in particular, is an important quantity to predict with CFD, and experimental skin friction data sets aid not only with the validation of the CFD predictions, but also in tuning the CFD models to predict specific flow fields. However, a practical experimental technique for collecting spatially and temporally resolved skin friction data on complex models does not yet exist. This dissertation develops and demonstrates a new luminescent oil film skin friction meter which can produce spatially-resolved quantitative steady and unsteady skin friction data on models with complex curvature. The skin friction acting on the surface of a thin film of oil can be approximated by the expression tauw =mu ouh/h, where mu o is the dynamic viscosity of the oil, uh is the velocity of the surface of the oil film, and h is the thickness of the oil film. The new skin friction meter determines skin friction by measuring h and uh. The oil film thickness h is determined by ratioing the intensity of the fluorescent emissions from the oil film with the intensity of the incident light which is scattered from the surface of the model. When properly calibrated, that ratio provides an absolute oil film thickness value. This oil film thickness meter is therefore referred as the Ratioed-Image Film-Thickness (RIFT) Meter. The oil film velocity uh is determined by monitoring the evolution of tagged molecules within the oil film: Photochromic molecules are dissolved into the fluorescent oil and a pattern is written into the oil film using an ultraviolet laser. The evolution of the pattern is recorded, and standard cross-correlation techniques are applied to the resulting sequence of images. This

  1. Ion beam induced luminescence on white inorganic pigments for paintings

    International Nuclear Information System (INIS)

    Quaranta, A.; Dran, J.C.; Salomon, J.; Tonezzer, M.; Scian, C.; Beck, L.; Carturan, S.; Maggioni, G.; Della Mea, G.

    2008-01-01

    Ion beam induced luminescence (IBIL) has been used for studying the emission features and the radiation hardness of white pigments. In particular, ZnO, gypsum and basic lead sulphate pigments have been analyzed with a 3.0 MeV H + beam at the AGLAE Louvre laboratory. The same pigments mixed with different binders have been also analyzed on a canvas, in order to evaluate the contribution of the binders both to the IBIL spectra and to the radiation hardness. It turns out that the binder affects both the IBIL spectra and the radiation hardness of pigments when the emission bands are related to point defects, as occurs for ZnO

  2. Responsive hybrid inorganic-organic system derived from lanthanide luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhan [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Zheng, Yuhui, E-mail: yhzheng78@scnu.edu.cn [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Jiang, Lasheng; Yang, Jinglian [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Wang, Qianming, E-mail: qmwang@scnu.edu.cn [Key Laboratory of Theoretical Chemistry of Environment, Ministry of Education, School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Guangzhou Key Laboratory of Materials for Energy Conversion and Storage, Guangzhou 510006 (China)

    2016-05-15

    Highlights: • A novel covalent hybrid material was used to detect hemoglobin. • All the recognition experiments were performed in buffer solution. • Porous nano-structures was extensively studied for the recognition. - Abstract: Terbium ions were incorporated into new organic-inorganic matrices to achieve intense green emissions. Hemoglobin (HB) interactions lead to dramatic changes in the luminescence emission intensities. Infrared spectra, morphological studies and photoluminescence give information for the speciation and process of hemoglobin additions. The porous material has a large specific surface area of 351 cm{sup 2}/g and the detection limit for HB (0.7 μM) was much lower than its physical doped material (8 μM). This promising hybrid material will lead to the design of versatile optical probes that are efficiently responding to the external targets.

  3. Intrinsic and defect related luminescence in double oxide films of Al–Hf–O system under soft X-ray and VUV excitation

    International Nuclear Information System (INIS)

    Pustovarov, V.A.; Smirnova, T.P.; Lebedev, M.S.; Gritsenko, V.A.; Kirm, M.

    2016-01-01

    Low temperature time-resolved luminescence spectra in the region of 2.5–9.5 eV under soft X-ray excitation as well as time-resolved luminescence excitation spectra in the UV–VUV region (3.7–12 eV) of solid solutions Al x Hf y O 1−x−y thin films were investigated. The values of x and Al/Hf ratio were determined from X-ray photoelectron srectroscopy data. Hafnia films and films mixed with alumina were grown in a flow-type chemical vapor deposition reactor with argon as a carrier gas. In addition, pure alumina films were prepared by the atomic layer deposition method. A strong emission band with the peak position at 4.4 eV and with the decay time in the μs-range was revealed for pure hafnia films. The emission peak at 7.74 eV with short nanosecond decay kinetics was observed in the luminescence spectra for pure alumina films. These emission bands were ascribed to the radiative decay of self-trapped excitons (an intrinsic luminescence) in pure HfO 2 and Al 2 O 3 films, respectively. Along with intrinsic host emission, defect related luminescence bands with a larger Stokes shift were observed. In the emission spectra of the solid solution films (x=4; 17; 20 at%) the intrinsic emission bands are quenched and only the luminescence of defects (an anion vacancies) was observed. Based on transformation of the luminescence spectra and ns-luminescence decay kinetics, as well as changes in the time-resolved luminescence and luminescence excitation spectra, the relaxation processes in the films of solid solution are discussed. - Highlights: • Low temperature time−resolved PL spectra were studied in a broad range (1.5−9.5 eV). • We carried out a luminescent control of point defects (anion vacancies) and self−trapped excitons. • We observed photoluminescence of excitons bound on defects. • We observed changes of photoluminescence properties with varying ratio components.

  4. Gigantic Circular Shock Acoustic Waves in the Ionosphere Triggered by the Launch of FORMOSAT-5 Satellite

    Science.gov (United States)

    Chou, Min-Yang; Shen, Ming-Hsueh; Lin, Charles C. H.; Yue, Jia; Chen, Chia-Hung; Liu, Jann-Yenq; Lin, Jia-Ting

    2018-02-01

    The launch of SpaceX Falcon 9 rocket delivered Taiwan's FORMOSAT-5 satellite to orbit from Vandenberg Air Force Base in California at 18:51:00 UT on 24 August 2017. To facilitate the delivery of FORMOSAT-5 to its mission orbit altitude of 720 km, the Falcon 9 made a steep initial ascent. During the launch, the supersonic rocket induced gigantic circular shock acoustic waves (SAWs) in total electron content (TEC) over the western United States beginning approximately 5 min after the liftoff. The circular SAWs emanated outward with 20 min duration, horizontal phase velocities of 629-726 m/s, horizontal wavelengths of 390-450 km, and period of 10.28 ± 1 min. This is the largest rocket-induced circular SAWs on record, extending approximately 114-128°W in longitude and 26-39°N in latitude ( 1,500 km in diameter), and was due to the unique, nearly vertical attitude of the rocket during orbit insertion. The rocket-exhaust plume subsequently created a large-scale ionospheric plasma hole ( 900 km in diameter) with 10-70% TEC depletions in comparison with the reference days. While the circular SAWs, with a relatively small amplitude of TEC fluctuations, likely did not introduce range errors into the Global Navigation Satellite Systems navigation and positioning system, the subsequent ionospheric plasma hole, on the other hand, could have caused spatial gradients in the ionospheric plasma potentially leading to a range error of 1 m.

  5. Giant retroperitoneal lipoma: a case report Lipoma gigante do retroperitônio: relato de caso

    Directory of Open Access Journals (Sweden)

    Carlos Augusto Real Martinez

    2003-12-01

    Full Text Available BACKGROUND: Retroperitoneal lipoma is an extremely rare neoplasm. AIMS: The authors report a case of giant retroperitoneal lipoma in a 32-year-old white female, with a history of pain and an abdominal mass over a 2-year period. Total abdominal ultrasonography and barium enema showed a large mass located in the retroperitoneal space behind the ascending colon. Laparotomy showed a large encapsulated tumor measuring 20 x 13 x 10 cm and weighing 3.400 g. The histological study revealed a benign neoplasm of fatty cells. CONCLUSION: The patient remains well 17 years after surgery, without recurrentce of the disease.RACIONAL: O lipoma é a neoplasia mesenquimal mais freqüente, raramente localizada no retroperitônio. Na maioria das vezes, o diagnóstico diferencial pré-operatório com os lipossarcomas de baixo grau de malignidade é difícil de ser estabelecido. OBJETIVO: Apresentar um caso de lipoma gigante retroperitoneal em mulher de 32 anos que há 2 anos apresentava história de dor e tumor abdominal palpável. A ultra-sonografia abdominal e o enema opaco mostraram grande massa localizada no retroperitônio, que deslocava o ceco e o cólon ascendente. A laparotomia mostrou tumor encapsulado com 20 x 13 x 10 cm e 3.400 g de peso. O estudo histopatológico mostrou presença de lipoma retroperitonial. A paciente encontra-se bem, sem recidiva da doença, 17 anos após a cirurgia.

  6. High-precision chronology for Central American maize diversification from El Gigante rockshelter, Honduras.

    Science.gov (United States)

    Kennett, Douglas J; Thakar, Heather B; VanDerwarker, Amber M; Webster, David L; Culleton, Brendan J; Harper, Thomas K; Kistler, Logan; Scheffler, Timothy E; Hirth, Kenneth

    2017-08-22

    The first steps toward maize ( Zea mays subspecies mays ) domestication occurred in the Balsas region of Mexico by ∼9,000 calendar years B.P. (cal B.P.), but it remains unclear when maize was productive enough to be a staple grain in the Americas. Molecular and microbotanical data provide a partial picture of the timing and nature of morphological change, with genetic data indicating that alleles for some domestication traits were not yet fixed by 5,300 cal B.P. in the highlands of Mexico. Here, we report 88 radiocarbon dates on the botanical remains from El Gigante rockshelter (Honduras) to establish a Bayesian chronology over the past ∼11,000 y spanning the transition to maize-based food production. Botanical remains are remarkably well preserved and include over 10,000 maize macrofossils. We directly dated 37 maize cobs to establish the appearance and local change of maize at the site. Cobs are common in deposits dating between 4,340 and 4,020 cal B.P., and again between 2,350 and 980 cal B.P. The earliest cobs appear robustly domesticated, having 10-14 rows, suggesting strong selection for increased yield. The later cobs are comparable to these earliest ones, but show clear emergence of diverse traits, including increased cob width, rachis segment length, and cupule width. Our results indicate that domesticated landraces of maize productive enough to be a staple grain existed in Central America by 4,300 cal B.P.

  7. Structural and luminescence effects of Ga co-doping on Ce-doped yttrium aluminate based phosphors

    Energy Technology Data Exchange (ETDEWEB)

    Ayvacikli, M. [Celal Bayar University, Faculty of Arts and Sciences, Department of Physics, Muradiye, Manisa (Turkey); Canimoglu, A. [Nigde University, Faculty of Arts and Sciences, Physics Department, Nigde (Turkey); Muresan, L.E., E-mail: laura_muresan2003@yahoo.com [Babes Bolyai University, Raluca Ripan Institute for Research in Chemistry, Fantanele 30, 400294 Cluj-Napoca (Romania); Barbu Tudoran, L. [Babes Bolyai University, Electronic Microscopy Centre, Clinicilor 37, 400006 Cluj Napoca (Romania); Garcia Guinea, J. [Museo Nacional Ciencias Naturales, Jose Gutierrez Abascal 2, Madrid 28006 (Spain); Karabulut, Y. [Celal Bayar University, Faculty of Arts and Sciences, Department of Physics, Muradiye, Manisa (Turkey); Jorge, A. [Museo Nacional Ciencias Naturales, Jose Gutierrez Abascal 2, Madrid 28006 (Spain); Karali, T. [Ege University, Institute of Nuclear Sciences, 35100 Bornova, İzmir (Turkey); Can, N., E-mail: cannurdogan@yahoo.com [Celal Bayar University, Faculty of Arts and Sciences, Department of Physics, Muradiye, Manisa (Turkey); Jazan University, Physics Department, P.O. Box 114, 45142 Jazan (Saudi Arabia)

    2016-05-05

    Herein, we primarily focus on luminescence spectrum measurements of various types of green emitting yttrium aluminate phosphors modified with gallium (Y{sub 3}Al{sub 5-x}Ga{sub x}O{sub 12}) synthesised by solid state reaction. The luminescent emission of samples depends on sample temperature and excitation radiation such as incident X-ray, electron and laser beam. Here, we measured radioluminescence (RL), cathodoluminescence (CL), photoluminescence (PL) along with XRD in order to clarify relationship between lattice defects and the spectral luminescence emissions. The RL and CL spectra of YAG:Ce exhibit an emission band ranging from 300 to 450 nm related to Y{sub Al} antisite defects. The broad emission band of garnet phosphors is shifted from 526 nm to 498 nm with increasing of Ga{sup 3+} content, while full width at half maximum (FWHM) of the band tends to be greater than the width of unmodified YAG:Ce garnet. Deconvolution of the spectrum reveals that three emission bands centred at 139, 234 and 294 °C occur in aluminate host garnets. - Highlights: • We present preparation of YAG:Ce{sup 3+}, Ga{sup 3+} phosphors by a solid state reaction method. • The shape and size of phosphor particles were investigated. • The luminescence properties were studied by different excitation sources.

  8. Synthesis and luminescent properties of a novel green-emitting Tb (Ⅲ) complex based on amino-modified fluorine silicone oil and isophorone diisocyanate

    Science.gov (United States)

    Hao, Haixia; Chu, Yang; Yu, Zhenjiang; Xie, Hongde; Seo, Hyo Jin

    2017-10-01

    The novel luminescent polymer-rare earth complexes, denoted as (PFSi-IPDI)-Tb(Ⅲ)-Phen, have been successfully synthesized and can be made into flexible films. Amino-modified fluorine silicone oil-isophorone diisocyanate (PFSi-IPDI) was used as the host macromolecular ligand, and 1, 10-Phenanthroline (Phen) as the secondary small-molecular co-ligand. The luminescent lanthanide complexes were characterized by fourier transform infrared (FITR), scanning electron microscope (SEM), thermogravimetric analysis (TGA). The luminescent properties were investigated through photoluminescence excitation (PLE) and emission (PL) spectroscopy. FTIR analysis verifies the successful preparation and integration of PFSi-IPDI to Tb3+. The comparatively uniform morphological structure can be observed in the images of SEM. The polymer-rare earth complexes display the typical luminescence emission peaks under the excitation wavelength of 330 nm. From the decay curve, the short lifetime (about 0.89 ms) is observed for (PFSi-IPDI)-Tb(Ⅲ)-Phen (0.6 mol/L). Moreover, these luminescent polymer-rare earth complexes possess superior thermal stability (T5 > 195 °C). All the interesting results suggest the potential application of the luminescent polymer-rare earth complexes in green-emitting luminescent materials under high temperature.

  9. Spectrometer for cluster ion beam induced luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Ryuto, H., E-mail: ryuto@kuee.kyoto-u.ac.jp; Sakata, A.; Takeuchi, M.; Takaoka, G. H. [Photonics and Electronics Science and Engineering Center, Kyoto University, Kyoto 615-8510 (Japan); Musumeci, F. [Department of Physics and Astronomy, Catania University, Catania 95123 (Italy); INFN Laboratori Nazionali del Sud, Catania 95123 (Italy)

    2015-02-15

    A spectrometer to detect the ultra-weak luminescence originated by the collision of cluster ions on the surfaces of solid materials was constructed. This spectrometer consists of 11 photomultipliers with band-pass interference filters that can detect the luminescence within the wavelength ranging from 300 to 700 nm and of a photomultiplier without filter. The calibration of the detection system was performed using the photons emitted from a strontium aluminate fluorescent tape and from a high temperature tungsten filament. Preliminary measurements show the ability of this spectrometer to detect the cluster ion beam induced luminescence.

  10. Designing spectrally-selective mirrors for use in luminescent solar concentrators

    Science.gov (United States)

    Connell, Ryan; Pinnell, Christian; Ferry, Vivian E.

    2018-02-01

    Spectrally-selective mirrors improve the performance of luminescent solar concentrators (LSCs) by trapping emitted light within the waveguide. However, this beneficial property comes with a spectral restriction on incident sunlight that enters the concentrator. Especially for luminophores with overlap between the absorption and emission bands, design of the spectrally-selective mirrors requires a tradeoff between transmission of incident sunlight and trapping of luminescent photons. In this paper, we explore how the design of a spectrally-selective top mirror changes for LSCs containing luminophores of varying loading fractions, quantum yield, and overlap between the absorption and emission spectra, as well as LSCs with different back reflectors and lateral sizes. Using CdSe/CdS core/shell nanocrystals as the luminophore, we find that specific conditions favor different mirror designs. Mirrors designed to trap luminescent light have higher predicted performance than mirrors designed for sunlight transmission when the luminophore quantum yield is greater than 0.85, the luminophore optical density is less than 1.4 at 450 nm, the lateral size of the concentrator is greater than 10 cm, or there is low overlap between the luminophore absorption and emission. Mirrors optimized for either transmission or luminescence trapping have comparable performance for quantum yields less than 0.85, and the other conditions favor mirrors optimized for light transmission. For a LSC with unity quantum yield, a lateral size of 1 m × 1 m, and a mirror designed to trap luminescent light, a concentration factor of 37× is possible, as compared to 10× for a LSC with an open top. This research indicates the importance of tailoring the design of the spectrally-selective top mirror to the properties of the luminophore and LSC.

  11. Polymeric Luminescent Compositions Doped with Beta-Diketonates Boron Difluoride as Material for Luminescent Solar Concentrator

    Science.gov (United States)

    Khrebtov, A. A.; Fedorenko, E. V.; Reutov, V. A.

    2017-11-01

    In this paper we investigated polymeric luminescent compositions based on polystyrene doped with beta diketonates boron difluoride. Transparent films with effective absorption in the ultraviolet and blue regions of the spectrum were obtained. Polymeric luminescent compositions based on the mixture of dyes allow expanding the absorption region and increase the radiation shift. A luminescent solar concentrator consisting of a glass plate coated with such film can be used for photovoltaic window application.

  12. ELABORACIÓN DE SNACK DE MAÍZ AMARILLO DURO (Zea mays L.), ENRIQUECIDO CON CALAMAR GIGANTE (Dosidicus gigas)

    OpenAIRE

    Villafuerte, Ursula; Obispo, Elfer O.; Maza, Santos T.; Macavilca, Edwin A.

    2017-01-01

    El objetivo del presente trabajo fue evaluar y determinar los parámetros óptimos de control para el proceso tecnológico de un snack a base de maíz amarillo duro (Zea mays L.), enriquecido con calamar gigante (Dosidicus gigas), mediante pruebas sensoriales en cada etapa del estudio y, finalmente, un análisis físico-químico para conocer su composición. Se obtuvo un producto inocuo, resultado del proceso de elaboración que consta de las siguientes operaciones: pre-tratamiento del maíz (nixtamali...

  13. Anemia hemolítica autoinmune en un niño con hepatitis de células gigantes

    OpenAIRE

    Jessica Gómez; Kathia Valverde

    2012-01-01

    La asociación de anemia hemolítica autoinmune (AHAI) con hepatitis de células gigantes (HCG) es un trastorno raro en la infancia. Son pocos los casos reportados y la gran mayoría fallecen a pesar de transplante hepático. La AHAI usualmente precede el desarrollo de la afección hepática. El diagnóstico temprano de esta asociación y el inicio de terapia inmunosupresora previene la progresión de la enfermedad.

  14. Synthesis and influence of ultrasonic treatment on luminescence of Mn incorporated ZnS nanoparticles

    Science.gov (United States)

    Cadis, A.-I.; Muresan, L. E.; Perhaita, I.; Munteanu, V.; Karabulut, Y.; Garcia Guinea, J.; Canimoglu, A.; Ayvacikli, M.; Can, N.

    2017-10-01

    Manganese (Mn) doping of ZnS phosphors was achieved by precipitation method using different ultrasound (US) maturation times. The structural and luminescence properties of the samples were carried out by means of X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), photoluminescence (PL), and cathodoluminescence (CL). The real amount of manganese incorporated in ZnS lattice was calculated based on ICP-OES results. According with XRD patterns, the phase structure of ZnS:Mn samples is cubic. EDS spectra reveal deviations of the Mn dopant concentration from the target composition. Both 300 K PL and CL emission spectra of the Mn doped ZnS phosphors display intense orange emission at 590 and 600 nm, respectively, which is characteristic emission of Mn ion corresponding to a 4T1→6A1 transition. Both PL and CL spectra confirmed manganese is substitutionally incorporated into the ZnS host as Mn2+. However, it is suggested that the origin of broad blue emission around 400 nm appeared in CL is due to the radiative recombination at deep level defect states in the ZnS. The ultrasound treatment at first enhances the luminescent intensity by ∼3 times in comparison with samples prepared by classical way. This study gives rise to an optimization guideline, which is extremely demanded for the development of new luminescent materials.

  15. Size, shape, and crystallinity of luminescent structures in oxidized Si nanoclusters and H-passivated porous Si

    Science.gov (United States)

    Schuppler, S.; Marcus, M. A.; Xie, Y. H.; Harris, T. D.; Brown, W. L.; Chabal, Y. J.; Szajowski, P. J.; Friedman, S. L.; Adler, D. L.; Ross, F. M.

    1994-11-01

    Near-edge and extended x-ray absorption fine structure measurements from a wide variety of H-passivated porous Si samples and oxidized Si nanocrystals, combined with electron microscopy, ir-absorption, alpha-recoil, and luminescence emission data, provide a consistent structural picture of the species responsible for the luminescence observed in these systems. For luminescent porous Si samples peaking in the visible region, i. e., less than or equal 700nm, their mass-weighted-average structures are determined here to be particles - not wires, whose short-range character is crystalline - not amorphous, and whose dimensions - typically less than 15 angstrom - are significantly smaller than previously reported or proposed. These results depend only on sample luminescence behavior, not on sample preparation details, and thus have general implications in describing the mechanism responsible for visible luminescence in porous silicon. New results are also presented which demonstrate that the observed luminescence is unrelated to either the photo-oxidized Si species in porous Si or the interfacial suboxide species in the Si nanocrystals.

  16. Eu2+-activated Ba3Ca3(PO4)4 phosphor with doping-concentration dependent luminescence

    Science.gov (United States)

    Tang, Huidong; Yang, Rong; Li, Rongzhu

    2017-10-01

    A color tunable phosphor of Eu2+-activated monophosphate Ba3Ca3(PO4)4 was developed via facile solid-state reaction synthesis. The samples were tested by X-ray powder diffraction (XRD) patterns, morphological properties, luminescence and decay lifetime measurements. The structural characteristics were discussed. The excitation bands of the phosphors cover the UV-, near-UV and blue-wavelength bands extending from 300 to 440 nm. The luminescence spectra of the phosphors show a great dependence on the Eu2+-concentration in Ba3Ca3(PO4)4, which can give blue to yellow emission colors. There are two kinds of Eu2+ centers in Ba3Ca3(PO4)4 lattices, which give yellow (EuI) and blue (EuII) luminescence with the maximum wavelength at 565 nm and 450 nm, respectively. The structural occupations and luminescence properties of EuI and EuII centers were discussed. EuI (yellow center) has a dominant contribution to the total luminescence with the increase of the Eu2+-doping level. The luminescence internal quantum efficiency and thermal stability (activation energy) were reported. The reported results could be helpful for the further potential application of the phosphor.

  17. Vapochromic luminescence and flexibility control of porous coordination polymers by substitution of luminescent multinuclear Cu(I) cluster nodes.

    Science.gov (United States)

    Hayashi, Takahiro; Kobayashi, Atsushi; Ohara, Hiroki; Yoshida, Masaki; Matsumoto, Takeshi; Chang, Ho-Chol; Kato, Masako

    2015-09-21

    Two luminescent porous coordination polymers (PCPs), i.e., [Cu2(μ2-I)2ctpyz]n and [Cu4(μ3-I)4ctpyz]n (Cu2 and Cu4, respectively; ctpyz = cis-1,3,5-cyclohexanetriyl-2,2',2″-tripyrazine), were successfully synthesized and characterized by single-crystal X-ray diffraction and luminescence spectroscopic measurements. Cu2 consists of rhombus-type dinuclear {Cu2I2} cores bridged by ctpyz ligands, while Cu4 is constructed of cubane-type tetranuclear {Cu4I4} cores bridged by ctpyz ligands. The void fraction of Cu4 is estimated to be 48.0%, which is significantly larger than that of Cu2 (19.9%). Under UV irradiation, both PCPs exhibit red luminescence at room temperature in the solid state (λem values of 660 and 614 nm for Cu2 and Cu4, respectively). Although the phosphorescence of Cu2 does not change upon removal and/or adsorption of EtOH solvent molecules in the porous channels, the solid-state emission maximum of Cu4 red-shifts by 36 nm (λem = 650 nm) upon the removal of the adsorbed benzonitrile (PhCN) molecules from the porous channels (and vice versa). This large difference in the vapochromic behavior of Cu2 and Cu4 is closely related to the framework flexibility. The framework of Cu2 is sufficiently rigid to retain the porous structure without solvated EtOH molecules, whereas the porous structure of Cu4 collapses easily after removal of the adsorbed PhCN molecules to form a nonporous amorphous phase. The original vapor-adsorbed porous structure of Cu4 is regenerated by exposure of the amorphous solid to not only PhCN vapor but also tetrahydrofuran, acetone, ethyl acetate, and N,N-dimethylformamide vapors. The Cu4 structures with the various adsorbed solvents showed almost the same emission maxima as the original PhCN-adsorbed Cu4, except for DMF-adsorbed Cu4, which showed no luminescence probably because of weak coordination of the DMF vapor molecules to the Cu(I) centers of the tetranuclear {Cu4I4} core.

  18. Nanocrystals for luminescent solar concentrators.

    Science.gov (United States)

    Bradshaw, Liam R; Knowles, Kathryn E; McDowall, Stephen; Gamelin, Daniel R

    2015-02-11

    Luminescent solar concentrators (LSCs) harvest sunlight over large areas and concentrate this energy onto photovoltaics or for other uses by transporting photons through macroscopic waveguides. Although attractive for lowering solar energy costs, LSCs remain severely limited by luminophore reabsorption losses. Here, we report a quantitative comparison of four types of nanocrystal (NC) phosphors recently proposed to minimize reabsorption in large-scale LSCs: two nanocrystal heterostructures and two doped nanocrystals. Experimental and numerical analyses both show that even the small core absorption of the leading NC heterostructures causes major reabsorption losses at relatively short transport lengths. Doped NCs outperform the heterostructures substantially in this critical property. A new LSC phosphor is introduced, nanocrystalline Cd(1-x)Cu(x)Se, that outperforms all other leading NCs by a significant margin in both small- and large-scale LSCs under full-spectrum conditions.

  19. Wireless Luminescence Integrated Sensors (WLIS)

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, M.L.; Sayler, G.S. (Univ. Tennessee)

    2003-11-10

    The goal of this project was the development of a family of wireless, single-chip, luminescence-sensing devices to solve a number of difficult distributed measurement problems in areas ranging from environmental monitoring and assessment to high-throughput screening of combinatorial chemistry libraries. These wireless luminescence integrated sensors (WLIS) consist of a microluminometer, wireless data transmitter, and RF power input circuit all realized in a standard integrated circuit (IC) process with genetically engineered, whole-cell, bioluminescent bioreporters encapsulated and deposited on the IC. The end product is a family of compact, low-power, rugged, low-cost sensors. As part of this program they developed an integrated photodiode/signal-processing scheme with an rms noise level of 175 electrons/second for a 13-minute integration time, and a quantum efficiency of 66% at the 490-nm bioluminescent wavelength. this performance provided a detection limit of < 1000 photons/second. Although sol-gel has previously been used to encapsulate yeast cells, the reaction conditions necessary for polymerization (primarily low pH) have beforehand proven too harsh for bacterial cell immobilizations. Utilizing sonication methods, they have were able to initiate polymerization under pH conditions conductive to cell survival. both a toluene bioreporter (Pseudomonas putida TVA8) and a naphthalene bioreporter (Pseudomonas fluorescens HK44) were successfully encapsulated in sol-gel and shown to produce a fairly significant bioluminescent response. In addition to the previously developed naphthalene- and toluene-sensitive bioreporters, they developed a yeast-based xenoestrogen reporter. This technology has been licensed by Micro Systems Technologies, a startup company in Dayton, Ohio for applications in environmental containments monitoring, and for detecting weapons of mass destruction (i.e. homeland security).

  20. Luminescent Lariat Aza-Crown Ether

    Directory of Open Access Journals (Sweden)

    Burkhard König

    2010-03-01

    Full Text Available Lariat ethers are interesting recognition motifs in supramolecular chemistry. The synthesis of a luminescent lariat ether with triglycol chain by azide–alkyne (Huisgen cycloaddition is presented.

  1. Application of luminescence techniques in retrospective dosimetry

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.; Jungner, H.

    1999-01-01

    Luminescence signals measured from minerals within bricks or ceramic samples can provide information about the absorbed radiation dose. This feature has for several years been used in dating archaeological and geological samples and recently luminescence techniques have been intensively used far...... retrospective assessment of accident doses received by the population after a nuclear accident. The development of new luminescence techniques after the Chernobyl accident has considerably improved the sensitivity and precision in the evaluation of accident doses. This paper reviews the development work......, especially on optically stimulated luminescence methods for retrospective assessment of accident doses carried out at Riso National Laboratory in collaboration with the University of Helsinki as part bf a joint European Union research project. We demonstrate that doses lower than 100 mGy can be measured from...

  2. Recent developments in luminescent solar concentrators

    Science.gov (United States)

    van Sark, W. G. J. H. M.

    2014-10-01

    High efficiency photovoltaic devices combine full solar spectrum absorption and effective generation and collection of charge carriers, while commercial success depends on cost effectiveness in manufacturing. Spectrum modification using down shifting has been demonstrated in luminescent solar concentrators (LSCs) since the 1970s, as a cheap alternative for standard c-Si technology. LSCs consist of a highly transparent plastic plate, in which luminescent species are dispersed, which absorb incident light and emit light at a red-shifted wavelength, with high quantum efficiency. Material issues have hampered efficiency improvements, in particular re-absorption of light emitted by luminescent species and stability of these species. In this contribution, approaches are reviewed on minimizing re-absorption, which should allow surpassing the 10% luminescent solar concentrator efficiency barrier.

  3. Quartz as a natural luminescence dosimeter

    Science.gov (United States)

    Preusser, Frank; Chithambo, Makaiko L.; Götte, Thomas; Martini, Marco; Ramseyer, Karl; Sendezera, Emmanuel J.; Susino, George J.; Wintle, Ann G.

    2009-12-01

    Luminescence from quartz is commonly used in retrospective dosimetry, in particular for the dating of archaeological materials and sediments from the Quaternary period. The phenomenon of luminescence is related to the interaction of natural radiation with mineral grains, by the activation of and subsequent trapping of electrons at defects within the quartz lattice. The latent luminescence signal (i.e. the trapped electrons) is released when the grains are exposed to stimulation energy in the form of light or heat. Despite the fact that quartz is most nominally pure SiO 2, the mineral forms in several different geological settings, i.e. under different pressure and temperature conditions. The luminescence emitted from quartz is complex and shows a variety of different components with diverse physical properties. This complexity is explained by the variety of defects in quartz that are either intrinsic (e.g., Si and O vacancies) or related to impurity atoms (e.g., Al or Ti). The concentration of impurity-related defects is dependent on the conditions of mineral formation or subsequent alteration. Experimental data have shown that the luminescence properties of quartz are highly variable with geological source and vary even at a grain-to-grain level within a sediment. As a consequence, caution is needed when making any general statements about the luminescence properties of quartz. When using luminescence measurements as a dating technique, it is necessary to adjust the measurement procedures for each geological provenance. Furthermore, some quartz has luminescence properties that make it problematic, or even unsuitable, for certain applications. These problems can arise from low and changing luminescence sensitivity, thermal transfer of trapped electrons, thermal instability of the trapped electrons and low saturation dose. Reviewing the present knowledge reveals that insufficient information is available either to unambiguously link distinctive lattice defects with

  4. Luminescence basic concepts, applications and instrumentation

    CERN Document Server

    Virk, Hardev Singh

    2014-01-01

    The word luminescence was first used by a German physicist, Eilhardt Wiedemann, in 1888. He also classified luminescence into six kinds according to the method of excitation. No better basis of classification is available today. He recognized photoluminescence, thermoluminescence, electroluminescence, crystalloluminescence, triboluminescence, and chemiluminescence. The designations are obvious, characterized by the prefix. This Volume consists of 9 Chapters, including 8 Review Papers and one Case Study. The first two papers are based on OLEDs. Organic light emitting diodes (OLEDs) have been th

  5. Optical spectroscopy and luminescence properties of Ho3+ doped zinc fluorophosphate (ZFP) glasses for green luminescent device applications

    Science.gov (United States)

    Reddy Prasad, V.; Damodaraiah, S.; Ratnakaram, Y. C.

    2018-04-01

    Ho3+ doped zinc fluorophosphate (ZFP) glasses with molar chemical compositions, (60-x) NH4H2PO4+20ZnO+10BaF2+10NaF+xHo2O3 (where x = 0.1, 0.3, 0.5, 1.0 and 1.5 mol%) were prepared by melt quenching technique. These glasses were characterized through physical, structural, optical, excitation, luminescence and decay curve analysis. From the absorption spectra, spectral intensities (fexp and fcal), Judd-Ofelt intensity parameters (Ω2, Ω4 and Ω6), radiative transition probabilities (AT), radiative lifetimes (τR) and branching ratios (βR) were evaluated for all Ho3+ doped ZFP glass matrices. From the photoluminescence spectra, peak stimulated emission cross-sections (σP) were calculated for all Ho3+ doped ZFP glasses. The Ho3+ doped ZFP glasses show strong green emission at 545 nm and red emission at 656 nm under excitation, 450 nm. The measured lifetimes (τmeas) of (5S2)5F4 level of Ho3+ doped ZFP glasses were obtained from decay profiles. The CIE color coordinates of Ho3+ doped ZFP glasses were calculated from emission spectra and 1.0 mol% of Ho3+ doped ZFP glass matrix gives green emission. Hence, these results confirm that the Ho3+ doped ZFP glasses could be considered as a promising candidate for visible green laser applications.

  6. Bright white upconversion luminescence from Er3+/Tm3+/Yb3+-doped titanate-based glasses prepared by aerodynamic levitation method

    Science.gov (United States)

    Zhang, Minghui; Yu, Jianding; Jiang, Wan; Liu, Yan; Ai, Fei; Wen, Haiqin; Jiang, Meng; Yu, Huimei; Pan, Xiuhong; Tang, Meibo; Gai, Lijun

    2017-10-01

    Aerodynamic levitation method was employed to prepare Er3+/Tm3+/Yb3+-doped titanate-based glasses. DTA results show that the glass performs high thermal stability with the glass transition temperature of 799 °C. The interaction among rare earth ions has been discussed by adjusting the relative concentration. Er3+ ions can quench the upconversion luminescence of Tm3+ ions. Tm3+ ions play a strong role in quenching the emissions of Er3+ and Tm3+ when the content of Tm3+ ions is greater than or equal 0.05. From the view of the ratio of red emission to green emission, Tm3+ ions can improve the red emission of Er3+ ions to some extent in contrast with the green emissions of Er3+ ions. 980 nm incident laser can be efficiently absorbed by Yb3+ ions. The relative intensity of red, green, and blue upconversion luminescence has been tuned to obtain white light. The composition with white upconversion luminescence of the color coordinate (0.291, 0.3292) has been found. Moreover, white upconversion luminescence mechanism is a two-photon process of ET, ESA, and cooperative sensitization. Rare earth ions doped titanate-based glasses with bright upconversion luminescence perform potential applications in color display, back light, et al.

  7. Plasmon-enhanced optically stimulated luminescence

    International Nuclear Information System (INIS)

    Guidelli, E. J.; Baffa, O.; Ramos, A. P.

    2015-10-01

    Full text: Optically Stimulated Luminescence dosimeters (OSLD) have been largely used for personal, medical, and industrial radiation dosimetry. Developing highly sensitive and small-sized radiation detectors and dosimeters is essential for improving spatial resolution and consequently diagnosis quality and treatment efficacy in the case of applications in radiodiagnosis and radiation therapy, for instance. Conventional methods to improve the OSLD sensitivity consist of doping and co-doping the host materials with atoms of other elements, thereby increasing the amount of trapping and/or luminescent centers. Our group is researching on the use of the plasmon properties of noble metal nanoparticles to increase OSL intensity. Upon incidence of a light beam with appropriate resonant wavelengths, the oscillation of the free electrons at the nanoparticle surface originates the Localized Surface Plasmons (LSP) and the consequent plasmon resonance band. The interaction between the LSP and the surrounding luminescent material leads to new optical properties largely employed for enhancing several luminescent processes. Here we will show our results regarding the use of LSP to increase OSLD sensitivity. The interaction between the traps/luminescent centers and the plasmons depends on the distance between them, on the plasmon resonance band intensity and position, as well as on the surrounding medium. Therefore, the plasmon-enhanced luminescence is a promising tool to develop more sensitive and miniaturized OSLD. (Author)

  8. Plasmon-enhanced optically stimulated luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Guidelli, E. J.; Baffa, O. [Universidade de Sao Paulo, Faculdade de Filosofia, Ciencias e Letras de Ribeirao Preto, Departamento de Fisica, Av. Bandeirantes 3900, 14040-901 Ribeirao Preto, Sao Paulo (Brazil); Ramos, A. P., E-mail: ederguidelli@gmail.com [Universidade de Sao Paulo, Faculdade de Filosofia, Ciencias e Letras de Ribeirao Preto, Departamento de Quimica, Av. Bandeirantes 3900, 14040-901 Ribeirao Preto, Sao Paulo (Brazil)

    2015-10-15

    Full text: Optically Stimulated Luminescence dosimeters (OSLD) have been largely used for personal, medical, and industrial radiation dosimetry. Developing highly sensitive and small-sized radiation detectors and dosimeters is essential for improving spatial resolution and consequently diagnosis quality and treatment efficacy in the case of applications in radiodiagnosis and radiation therapy, for instance. Conventional methods to improve the OSLD sensitivity consist of doping and co-doping the host materials with atoms of other elements, thereby increasing the amount of trapping and/or luminescent centers. Our group is researching on the use of the plasmon properties of noble metal nanoparticles to increase OSL intensity. Upon incidence of a light beam with appropriate resonant wavelengths, the oscillation of the free electrons at the nanoparticle surface originates the Localized Surface Plasmons (LSP) and the consequent plasmon resonance band. The interaction between the LSP and the surrounding luminescent material leads to new optical properties largely employed for enhancing several luminescent processes. Here we will show our results regarding the use of LSP to increase OSLD sensitivity. The interaction between the traps/luminescent centers and the plasmons depends on the distance between them, on the plasmon resonance band intensity and position, as well as on the surrounding medium. Therefore, the plasmon-enhanced luminescence is a promising tool to develop more sensitive and miniaturized OSLD. (Author)

  9. Rapid and repeated origin of insular gigantism and dwarfism in Australian tiger snakes.

    Science.gov (United States)

    Keogh, J Scott; Scott, Ian A W; Hayes, Christine

    2005-01-01

    It is a well-known phenomenon that islands can support populations of gigantic or dwarf forms of mainland conspecifics, but the variety of explanatory hypotheses for this phenomenon have been difficult to disentangle. The highly venomous Australian tiger snakes (genus Notechis) represent a well-known and extreme example of insular body size variation. They are of special interest because there are multiple populations of dwarfs and giants and the age of the islands and thus the age of the tiger snake populations are known from detailed sea level studies. Most are 5000-7000 years old and all are less than 10,000 years old. Here we discriminate between two competing hypotheses with a molecular phylogeography dataset comprising approximately 4800 bp of mtDNA and demonstrate that populations of island dwarfs and giants have evolved five times independently. In each case the closest relatives of the giant or dwarf populations are mainland tiger snakes, and in four of the five cases, the closest relatives are also the most geographically proximate mainland tiger snakes. Moreover, these body size shifts have evolved extremely rapidly and this is reflected in the genetic divergence between island body size variants and mainland snakes. Within south eastern Australia, where populations of island giants, populations of island dwarfs, and mainland tiger snakes all occur, the maximum genetic divergence is only 0.38%. Dwarf tiger snakes are restricted to prey items that are much smaller than the prey items of mainland tiger snakes and giant tiger snakes are restricted to seasonally available prey items that are up three times larger than the prey items of mainland tiger snakes. We support the hypotheses that these body size shifts are due to strong selection imposed by the size of available prey items, rather than shared evolutionary history, and our results are consistent with the notion that adaptive plasticity also has played an important role in body size shifts. We suggest

  10. Paraganglioma pré-aórtico gigante Giant preaortic paraganglioma

    Directory of Open Access Journals (Sweden)

    Sergio Renato Pais Costa

    2008-12-01

    Full Text Available INTRODUÇÃO: O paraganglioma é um tumor neuroendócrino raro que ocorre mais frequentemente em adultos jovens. Geralmente produz catecolaminas acarretando síndrome adrenérgica. No entanto, muito raramente, quando não-funcionante seus sintomas são mais frequentemente associados à massa abdominal ou mesmo dor. Nessas circunstâncias costumam representar diagnóstico difícil sendo confundidos com os sarcomas de retroperitônio. RELATO DO CASO: Paraganglioma pré-aórtico gigante não-funcionante em paciente com níveis baixos de catecolaminas (sérico e urinário. O diagnóstico pré-operatório foi dado por tomografia computadorizada, onde foi observada massa sólida, hipervascular com calcificações e área cística central. O paciente foi submetido à ressecção cirúrgica da massa com boa evolução pós-operatória. Um ano após a operação, o doente encontra-se vivo sem recidiva tumoral. CONCLUSÃO: Em que pese a raridade o paraganglioma pré-aortico não-funcionante deve ser lembrado com diagnóstico diferencial com os sarcomas de retroperitônio. Seu tratamento é cirúrgico e apresenta bom prognóstico.RACIONAL: Paraganglioma is a rare neuroendocrine tumor which often diagnosed in the young adult. Generally, paraganglioma produces catecholamines causing adrenergic syndrome. However, more rarely when tumor is nonfunctioning, their symptoms are more associated with an abdominal mass or even pain. In these circumstances, paraganglioma present a difficult diagnosis confounding with retroperitoneal sarcomas. CASE REPORT: The authors present a case of nonfunctioning giant preaortic paraganglioma. This patient had low levels of catecholamines (both seric and urinary. The preoperative diagnosis was done by means computed tomography. This lesion presented as well-vascularized tumor with calcifications and necrotic central area. The patient underwent a surgical resection with good postoperative outcome. To date, one year after surgical

  11. Climatic control on the growth of gigantic gypsum crystals within hypogenic caves (Naica mine, Mexico)?

    Science.gov (United States)

    Garofalo, Paolo S.; Fricker, Mattias B.; Günther, Detlef; Forti, Paolo; Mercuri, Anna-Maria; Loreti, Mara; Capaccioni, Bruno

    2010-01-01

    Three hypogenic caves within the Naica mine of Mexico ( Cueva de los Cristales — CLC, Ojo de la Reina — OR, and Cueva de las Velas — CLV) host spectacular gypsum crystals up to 11 m in length. These caves are close to another shallow cave of the area ( Cueva de las Espadas — CLE), with which they cover a 160 m-deep vertical section of the local drainage basin. Similar to other hypogenic caves, all these caves lack a direct connection with the land surface and should be unrelated with climate. A record of multi-technique fluid inclusion data and pollen spectra from cave and mine gypsum indicates surprisingly that climatic changes occurring at Naica could have controlled fluid composition in these caves, and hence crystal growth. Microthermometry and LA-ICP-Mass Spectrometry of fluid inclusions indicate that the shallow, chemically peculiar, saline fluid (up to 7.7 eq. wt.%NaCl) of CLE could have formed from evaporation, during a dry and hot climatic period. The fluid of the deep caves was instead of low salinity (˜ 3.5 eq. wt.% NaCl) and chemically homogeneous, and was poorly affected by evaporation. We propose that mixing of these two fluids, generated at different depths of the Naica drainage basin, determined the stable supersaturation conditions for the gigantic gypsum crystals to grow. Fluid mixing was controlled by the hydraulic communication between CLE and the other deep caves, and must have taken place during cycles of warm-dry and fresh-wet climatic periods, which are known to have occurred in the region. Pollen grains from a 35 ka-old gypsum crystal of CLC corresponds to a fairly homogenous catchment basin made of a mixed broadleaf wet forest, which suggests precipitation during a fresh-wet climatic period and confirms our interpretation of the fluid inclusion data. The unusual combination of geological and geochemical factors of Naica suggests that other hypogenic caves found elsewhere may not host similar crystals. However, this work shows that

  12. Silicon based light emitters utilizing radiation from dislocations; electric field induced shift of the dislocation-related luminescence

    NARCIS (Netherlands)

    Arguirov, T.; Mchedlidze, T.; Kittler, M.; Reiche, M.; Wilhelm, T.; Hoang, T.; Holleman, J.; Schmitz, Jurriaan

    2009-01-01

    Dislocation rich regions can be controllably formed at a certain location inside a silicon wafer. We studied the light emission properties of such regions located in an electric field of a p–n junction under different excitation conditions. It was found that the luminescence spectra of the

  13. Use of a highly sensitive two-dimensional luminescence imaging system to monitor endogenous bioluminescence in plant leaves

    Directory of Open Access Journals (Sweden)

    Flor-Henry Michel

    2004-11-01

    Full Text Available Abstract Background All living organisms emit spontaneous low-level bioluminescence, which can be increased in response to stress. Methods for imaging this ultra-weak luminescence have previously been limited by the sensitivity of the detection systems used. Results We developed a novel configuration of a cooled charge-coupled device (CCD for 2-dimensional imaging of light emission from biological material. In this study, we imaged photon emission from plant leaves. The equipment allowed short integration times for image acquisition, providing high resolution spatial and temporal information on bioluminescence. We were able to carry out time course imaging of both delayed chlorophyll fluorescence from whole leaves, and of low level wound-induced luminescence that we showed to be localised to sites of tissue damage. We found that wound-induced luminescence was chlorophyll-dependent and was enhanced at higher temperatures. Conclusions The data gathered on plant bioluminescence illustrate that the equipment described here represents an improvement in 2-dimensional luminescence imaging technology. Using this system, we identify chlorophyll as the origin of wound-induced luminescence from leaves.

  14. Luminescent ultra-small gold nanoparticles obtained by ion implantation in silica

    Energy Technology Data Exchange (ETDEWEB)

    Cesca, T., E-mail: tiziana.cesca@unipd.it [Department of Physics and Astronomy and CNISM, University of Padova, via Marzolo 8, I-35131 Padova (Italy); Maurizio, C.; Kalinic, B.; Scian, C. [Department of Physics and Astronomy and CNISM, University of Padova, via Marzolo 8, I-35131 Padova (Italy); Trave, E.; Battaglin, G. [Department of Molecular Sciences and Nanosystems, Ca’ Foscari University of Venice, Dorsoduro 2137, I-30123 Venice (Italy); Mazzoldi, P.; Mattei, G. [Department of Physics and Astronomy and CNISM, University of Padova, via Marzolo 8, I-35131 Padova (Italy)

    2014-05-01

    The room temperature photoluminescence properties of ultra-small Au nanoclusters (made by 5–10 atoms) obtained by ion implantation in silica are presented. The results show a broad and intense luminescent emission in three different spectral regions around 750 nm, 980 nm and 1150 nm. The luminescence properties of the molecule-like Au clusters have been also correlated to the energy-transfer process to Er{sup 3+} ions in Au–Er co-implanted silica samples. A partial quenching of the 980 nm component is observed due to the Er{sup 3+} absorption level at 980 nm that acts as a de-excitation channel through which the photon energy is transferred from the Au nanoclusters to the Er ions, eventually producing the Er-related emission at 1.5 microns.

  15. Tuning the Upconversion Luminescence Lifetimes of KYb2 F7 :Ho(3+) Nanocrystals for Optical Multiplexing.

    Science.gov (United States)

    Ding, Mingye; Chen, Daqin; Ma, Danyang; Liu, Peng; Song, Kaixin; Lu, Hongwei; Ji, Zhenguo

    2015-12-21

    Conventional luminescent color coding is limited by spectral overlap and the interference of background fluorescence, thus restricting the number of distinguishable identities that can be used in practice. Here, we demonstrate the possibility of generating diverse time-domain codes, specially designed for a single emission band, using lanthanide-doped upconversion nanocrystals. Based on the knowledge of concentration quenching, the upconversion luminescence kinetics of KYb2 F7 : Ho(3+) nanocrystals can be precisely controlled by modifying the dopant concentration of Ho(3+) ions, resulting in a tunable emission lifetime from 75.8 to 1944.5 μs, which suggests the practicality of these time-domain codes for optical multiplexing. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Analysis of art objects by means of ion beam induced luminescence

    International Nuclear Information System (INIS)

    Quaranta, A; Dran, J C; Salomon, J; Pivin, J C; Vomiero, A; Tonezzer, M; Maggioni, G; Carturan, S; Mea, G Della

    2006-01-01

    The impact of energetic ions on solid samples gives rise to the emission of visible light owing to the electronic excitation of intrinsic defects or extrinsic impurities. The intensity and position of the emission features provide information on the nature of the luminescence centers and on their chemical environments. This makes ion beam induced luminescence (IBIL) a useful complement to other ion beam analyses, like PIXE, in the cultural heritage field in characterizing the composition and the provenience of art objects. In the present paper, IBIL measurements have been performed on inorganic pigments for underlying the complementary role played by IBIL in the analysis of artistic works. Some blue and red pigment has been presented as case study

  17. Arginine-responsive terbium luminescent hybrid sensors triggered by two crown ether carboxylic acids

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Lasheng [Key Laboratory of Theoretical Chemistry of Environment, Ministry of Education, School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Tang, Ke; Ding, Xiaoping [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Wang, Qianming, E-mail: qmwang@scnu.edu.cn [Key Laboratory of Theoretical Chemistry of Environment, Ministry of Education, School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Zhou, Zhan; Xiao, Rui [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China)

    2013-12-01

    Crown ether carboxylic acids constitute main building blocks for the synthesis of terbium containing covalent cross-linked luminescent materials. Both the complexes and the hybrid nanomaterials could exhibit remarkable green emissions in pure water. More importantly, they were found to have a profound effect on the luminescence responses to arginine compared with glutamic acid, histidine, tryptophan, threonine, tyrosine and phenylalanine in aqueous environment. The present study provided the possibility of using a host–guest mechanism as a way of signal transduction based on lanthanide supramolecular hybrid materials. - Highlights: • Crown ether carboxylic acids were found to sensitize terbium ions among a group of ethers. • The complexes and silica hybrid materials were both prepared and characterized. • They could exhibit remarkable green emissions in pure water.

  18. Cooperative upconversion luminescence of Er3 + in Gd2O3 - xSx phosphor

    Science.gov (United States)

    Wang, Fei; Yang, Bin; Yu, Qingchun; Liu, Dachun; Ma, Wenhui

    2018-02-01

    Gd2O3 - xSx:Er crystals were prepared through high-temperature solid-state reaction method in vacuum, with the vacuum synthesis mechanism determined by thermal analysis. The crystal structure and upconversion luminescence properties were investigated respectively by XRD, TEM and spectrophotometer. Well crystallized Gd2O2S:Er phosphors were prepared under 1000 °C in vacuum with a certain excessive amount of sulfur content than stoichiometric. It is confirmed that with the increasing sulfur content the green emission was enhanced and red emission was weakened. The cooperative upconversion luminescence of Er3 + in non-stoichiometric Gd2O3 - xSx crystals was interpreted as a result of two photon absorption and the photon avalanche process.

  19. Divertículo gigante de colon: Presentación de un caso Giant colon diverticulum: A case report

    Directory of Open Access Journals (Sweden)

    Edelberto Fuentes Valdés

    2007-03-01

    Full Text Available El divertículo gigante de colon es una enfermedad rara que ocurre como complicación de la diverticulosis colónica, principalmente sigmoidea. Se presenta el caso de una paciente de 84 años tratada en el servicio de Cirugía General del Hospital «Hermanos Ameijeiras» en marzo de 2006 por presentar un divertículo gigante del colon sigmoides. La radiografía simple de abdomen, el colon por enema, el tránsito intestinal y la tomografía axial computadorizada demostraron la lesión quística llena de aire con nivel hidroaéreo. La intervención comprendió la resección segmentaria de colon en bloque con el divertículo. El período posoperatorio transcurrió sin ninguna complicación y la paciente se encuentra asintomática al momento de redactar este artículo

  20. Pelletization of seeds of Raphanus sativus L. cv. Redondo Gigante with graphite for germination under water stress conditions

    Directory of Open Access Journals (Sweden)

    Nobel Penteado Freitas

    2000-01-01

    Full Text Available The effect of water stress on germination of radish seeds is dependent on the presence of light. The effect of pelletization of radish seeds with powdered graphite on the tolerance to water stress under light was analysed. White light and far-red lights were filtered by graphite increasing slightly the tolerance of pelleted seeds to water stress of -0.77MPa. Although red light also inhibited seed germination the graphite had no effect. We propose the pelletization of seeds of Raphanus sativus, at least in cv redondo gigante with graphite as a pratice before planting to increase the tolerance to water stress.O efeito do estresse hídrico é dependente da presença de luz em sementes de rabanete. O efeito da peletização com grafite em pó foi analisado. Luz branca e vermelho-extremo são filtradas pelo grafite aumentando parcialmente a tolerância ao estresse hídrico de -0,77MPa em sementes peletizadas. Embora a luz vermelha também iniba a germinação em condições de estresse a peletização não teve efeito. Nós propomos a peletização de sementes de Raphanus saivus L. cv. redondo gigante como uma prática antes do plantio para aumentar a tolerância ao estresse hídrico.

  1. Architectures moléculaire et supramoléculaires à base de Lanthanides Luminescents

    OpenAIRE

    Bozoklu, Gulay

    2011-01-01

    The construction of preprogrammed, sophisticated and nanoscopic polymetallic lanthanide complexes for the development of luminescent materials that possess new or improved photophysical properties (dual emission, intermetallic energy transfer, etc.) is one of the hot topics in the lanthanide supramolecular chemistry. Understanding, controlling and programming self assembly of lanthanide complexes is a key challenge due to the difficulty in controlling the coordination environment of these ion...

  2. Persistent Luminescence in Eu2+-Doped Compounds: A Review

    Directory of Open Access Journals (Sweden)

    Koen Van den Eeckhout

    2010-04-01

    Full Text Available In 1996, Matsuzawa et al. reported on the extremely long-lasting afterglow of SrAl2O4:Eu2+ codoped with Dy3+ ions, which was more than 10-times brighter than the previously widely used ZnS:Cu,Co. Since then, research for stable and efficient persistent phosphors has continuously gained popularity. However, even today - almost 15 years after the discovery of SrAl2O4:Eu2+, Dy3+ - the number of persistent luminescent materials is still relatively low. Furthermore, the mechanism behind this phenomenon is still unclear. Although most authors agree on the general features, such as the existence of long-lived trap levels, many details are still shrouded in mystery. In this review, we present an overview of the important classes of known persistent luminescent materials based on Eu2+-emission and how they were prepared, and we take a closer look at the models and mechanisms that have been suggested to explain bright afterglow in various compounds.

  3. Persistent Luminescence in Eu2+-Doped Compounds: A Review

    Science.gov (United States)

    Van den Eeckhout, Koen; Smet, Philippe F.; Poelman, Dirk

    2010-01-01

    In 1996, Matsuzawa et al. reported on the extremely long-lasting afterglow of SrAl2O4:Eu2+ codoped with Dy3+ ions, which was more than 10-times brighter than the previously widely used ZnS:Cu,Co. Since then, research for stable and efficient persistent phosphors has continuously gained popularity. However, even today - almost 15 years after the discovery of SrAl2O4:Eu2+, Dy3+ - the number of persistent luminescent materials is still relatively low. Furthermore, the mechanism behind this phenomenon is still unclear. Although most authors agree on the general features, such as the existence of long-lived trap levels, many details are still shrouded in mystery. In this review, we present an overview of the important classes of known persistent luminescent materials based on Eu2+-emission and how they were prepared, and we take a closer look at the models and mechanisms that have been suggested to explain bright afterglow in various compounds.

  4. Luminescent multifunctional lanthanides-based metal-organic frameworks.

    Science.gov (United States)

    Rocha, João; Carlos, Luís D; Paz, Filipe A Almeida; Ananias, Duarte

    2011-02-01

    Metal-organic frameworks based on trivalent lanthanides (LnMOFs) are a very promising class of materials for addressing the challenges in engineering of luminescent centres. Lanthanide-bearing phosphors find numerous applications in lighting, optical communications, photonics and biomedical devices. In this critical review we discuss the potential of LnMOFs as multifunctional systems, which combine light emission with properties such as microporosity, magnetism, chirality, molecule and ion sensing, catalysis and activity as multimodal imaging contrast agents. We argue that these materials present a unique chance of observing synergy between several of these properties, such as the coupling between photoluminescence and magnetism. Moreover, an integrated approach towards the design of efficient, stable, cheap, environmentally-friendly and multifunctional luminescent LnMOFs is still missing. Although research into LnMOFs is at its early stage and much basic knowledge is still needed, the field is ripe for new ideas, which will enable sensor devices and photonic prototypes to become a commercial reality (81 references).

  5. Europium-enabled luminescent single crystal and bulk YAG and YGG for optical imaging

    Science.gov (United States)

    Skaudžius, Ramūnas; Enseling, David; Skapas, Martynas; Selskis, Algirdas; Pomjakushina, Ekaterina; Jüstel, Thomas; Kareiva, Aivaras; Rüegg, Christian

    2016-10-01

    Europium doped small particles presently receive great attention due to their excellent photoluminescent (PL) intensity, (photo)chemical stability, and linearity in the orange-red spectral region and find challenging biomedical application. Europium doped compounds are extremely good candidates for optical imaging due to stable luminescence, long fluorescence decay time, sharp emission peaks, i.e. narrow band width, in the red to near-infrared (NIR) region. Moreover, lasers based on red emission of europium also could be an attractive choice for medical application since NIR radiation can penetrate biological tissues such as human skin. This study allows to discuss luminescent properties of europium (5 at-% or 30 at-%) doped Y3Al5O12 and Y3Ga5O12 garnets in single crystals and powders. Europium enabled luminescent properties are discussed based on the concentration of europium and dopant local environment. All these compounds possess dominant 5D0 → 7F4 emission in the NIR region and are thus potential candidates for optical imaging.

  6. Non-tinted Transparent Luminescent Solar Concentrators Employing Both UV and NIR Selective Absorbers

    Science.gov (United States)

    Zhao, Yimu; Lunt, Richard

    2014-03-01

    Luminescent solar concentrators are a potentially low-cost solar harvesting solution that additionally offer opportunities for integration around buildings and windows. However, the visible absorption and emission of previously demonstrated chromophores hamper their widespread applications including solar windows. Here, we demonstrate non-tinted transparent luminescent solar concentrators (TLSC) that employ both ultraviolet (UV) and near-infrared (NIR) selective absorbing luminophores that create an entirely new paradigm for power-producing transparent surfaces and enhances the potential over UV-only TLSCs. We have previously designed UV-harvesting systems composed of metal halide phosphorescent luminophore blends that enable absorption cutoff positioned at the edge of visible spectrum (430nm) and massive-downconverted emission in the near-infrared (800nm) with quantum yields for luminescence of 75%. Here, we have developed a complimentary TLSC employing fluorescent organic salts with both efficient NIR absorption and deeper NIR emission. We will discuss the photophysical properties of these luminophores, the impact of ligand-host control, and optimization of the TLSC architectures.

  7. Luminescence investigation of Fe (III) – rhodamine B complexes obtained by solvent extraction

    Energy Technology Data Exchange (ETDEWEB)

    Czoik, Rozalia, E-mail: rozalia.czoik@us.edu.pl [Institute of Chemistry, University of Silesia, 9 Szkolna Street, 40-007 Katowice (Poland); Żur, Lidia; Szpikowska-Sroka, Barbara; Połedniok, Justyna [Institute of Chemistry, University of Silesia, 9 Szkolna Street, 40-007 Katowice (Poland); Swinarew, Andrzej S. [Institute of Materials Science, University of Silesia, 12 Bankowa Street, 40-007 Katowice (Poland); Pisarski, Wojciech A. [Institute of Chemistry, University of Silesia, 9 Szkolna Street, 40-007 Katowice (Poland)

    2013-07-15

    Optical properties of complexes of rhodamine B (RB) and Fe{sup 3+} ions have been investigated using optical spectroscopy. The ionic-association coordination compounds of rhodamine B and iron ions (FeRB) were prepared in the acid environment by means of solvent extraction to chloroform phase. Emission and excitation spectra and luminescence decay curves were analyzed as a function of metal ion concentration. It was found that Fe{sup 3+} ions at such conditions were effective in quenching fluorescence and that the intensity of luminescence clearly depended on the metal ion concentration. The emission decrease was observed in the concentration range from 1 to 60 μg Fe/mL solution. Similar relationship was also recorded for the luminescence lifetimes of the investigated systems. Basis on the lifetime and fluorescence intensity measurements and the Stern-Volmer relation the values of quenching rate constant k{sub q} and K{sub sv} constant for the investigated system at chloroform phase were also determined. -- Highlights: ► The complexes of rhodamine B and Fe{sup 3+} were prepared by extraction to chloroform phase. ► Optical properties of FeRB complexes were studied as a function of Fe{sup 3+} concentration. ► The emission intensities and lifetimes decrease with increasing of quencher content. ► The quenching rate constant k{sub q} and K{sub sv} constant for the study systems were determined.

  8. New highly luminescent hybrid materials: terbium pyridine-picolinate covalently grafted on kaolinite.

    Science.gov (United States)

    de Faria, Emerson H; Nassar, Eduardo J; Ciuffi, Katia J; Vicente, Miguel A; Trujillano, Raquel; Rives, Vicente; Calefi, Paulo S

    2011-04-01

    Luminescent hybrid materials derived from kaolinite appear as promising materials for optical applications due to their specific properties. The spectroscopic behavior of terbium picolinate complexes covalently grafted on kaolinite and the influence of the secondary ligand and thermal treatment on luminescence are reported. The resulting materials were characterized by thermal analysis, element analysis, X-ray diffraction, infrared absorption spectroscopy, and photoluminescence. The thermogravimetric curves indicated an enhancement in the thermal stability up to 300 °C for the lanthanide complexes covalently grafted on kaolinite, with respect to the isolated complexes. The increase in the basal spacing observed by X-ray diffraction confirmed the insertion of the organic ligands into the basal space of kaolinite, involving the formation of a bond between Al-OH and the carboxylate groups, as evidenced by infrared spectroscopy. The luminescent hybrid material exhibited a stronger characteristic emission of Tb(3+) compared to the isolated complex. The excitation spectra displayed a broad band at 277 nm, assigned to a ligand-to-metal charge transfer, while the emission spectra presented bands related to the electronic transitions characteristic of the Tb(3+) ion from the excited state (5)D(4) to the states (7)F(J) (J=5, 4, and 3), with the 4→5 transition having high intensity with green emission. © 2011 American Chemical Society

  9. Arteritis de células gigantes (Arteritis temporal Utilidad del Eco-Doppler Color en el diagnóstico

    Directory of Open Access Journals (Sweden)

    Hugo Tarigo

    2016-09-01

    El objetivo de la presente comunicación es reafirmar la utilidad y valor de este método diagnóstico, subutilizado en nuestra práctica clínica, en pacientes con planteo de arteritis de células gigantes.

  10. Rethinking Sensitized Luminescence in Lanthanide Coordination Polymers and MOFs: Band Sensitization and Water Enhanced Eu Luminescence in [Ln(C15H9O5)3(H2O)3]n (Ln = Eu, Tb).

    Science.gov (United States)

    Einkauf, Jeffrey D; Kelley, Tanya T; Chan, Benny C; de Lill, Daniel T

    2016-08-15

    A coordination polymer [Ln(C15H9O9)3(H2O)3]n (1-Ln = Eu(III), Tb(III)) assembled from benzophenonedicarboxylate was synthesized and characterized. The organic component is shown to sensitize lanthanide-based emission in both compounds, with quantum yields of 36% (Eu) and 6% (Tb). Luminescence of lanthanide coordination polymers is currently described from a molecular approach. This methodology fails to explain the luminescence of this system. It was found that the band structure of the organic component rather than the molecular triplet state was able to explain the observed luminescence. Deuterated (Ln(C15H9O9)3(D2O)3) and dehydrated (Ln(C15H9O9)3) analogues were also studied. When bound H2O was replaced by D2O, lifetime and emission increased as expected. Upon dehydration, lifetimes increased again, but emission of 1-Eu unexpectedly decreased. This reduction is reasoned through an unprecedented enhancement effect of the compound's luminescence by the OH/OD oscillators in the organic-to-Eu(III) energy transfer process.

  11. Fiber optical dose rate measurement based on the luminescence of beryllium oxide

    Directory of Open Access Journals (Sweden)

    Teichmann Tobias

    2018-01-01

    Full Text Available This work presents a fiber optical dose rate measurement system based on the radioluminescence and optically stimulated luminescence of beryllium oxide. The system consists of a small, radiation sensitive probe which is coupled to a light detection unit with a long and flexible light guide. Exposing the beryllium oxide probe to ionizing radiation results in the emission of light with an intensity which is proportional to the dose rate. Additionally, optically stimulated luminescence can be used to obtain dose and dose rate information during irradiation or retrospectively. The system is capable of real time dose rate measurements in fields of high dose rates and dose rate gradients and in complex, narrow geometries. This enables the application for radiation protection measurements as well as for quality control in radiotherapy. One inherent drawback of fiber optical dosimetry systems is the generation of Cherenkov radiation and luminescence in the light guide itself when it is exposed to ionizing radiation. This so called “stem” effect leads to an additional signal which introduces a deviation in the dose rate measurement and reduces the spatial resolution of the system, hence it has to be removed. The current system uses temporal discrimination of the effect for radioluminescence measurements in pulsed radiation fields and modulated optically stimulated luminescence for continuous irradiation conditions. This work gives an overview of the major results and discusses new-found obstacles of the applied methods of stem discrimination.

  12. Luminescence of Lanthanoides (Rare-earth elements) – Probes of structural variations in minerals

    International Nuclear Information System (INIS)

    Lenz, C.

    2015-01-01

    This cumulative PhD thesis summarises several individual studies on the luminescence of REE (rare-earth elements; i.e., trivalent lanthanoides), which are typically incorporated in accessory minerals such as zircon, titanite, monazite–(Ce) and xenotime–(Y). A main objective of these studies is to examine the powerfulness of REE luminescence-spectroscopy as structural probe. In particular, this concerns the potential use of REE3+ emissions in characterising structural disorder of their accessory host minerals as caused by radiation damage and/or compositional heterogeneity. Especially the former (i.e., mineral disorder due to radiation damage) is of interest to Earth and materials scientists, for instance for the understanding of changed physicochemical properties of initially crystalline materials that are affected by structural damage as caused by the radioactive decay of actinides. Moreover, a substantial contribution of the studies presented lies in the field of basic properties of the REE luminescence of natural accessory minerals. First, the investigations have addressed the identification of diverse REE species in diverse natural host minerals (which is done using synthetic REE-doped analogues). Second, factors that may bias the quantitative estimation of spectroscopic parameters have been studied, including effects of experimental parameters (crystal orientation and temperature) and the samples’ compositional heterogeneity. The results will be particularly useful to the growing community of Earth scientists who apply REE luminescence-spectroscopy in studying geological materials. (author) [de

  13. Photon cascade luminescence from Pr3+ ions in LiPrP4O12 polyphosphate

    International Nuclear Information System (INIS)

    Shalapska, T; Stryganyuk, G; Romanyshyn, Yu; Demchenko, P; Voloshinovskii, A; Trots, D; Gektin, A; Dorenbos, P

    2010-01-01

    The spectral-kinetic properties of luminescence from LiY 1-x Pr x P 4 O 12 (x = 1, 0.1) phosphors are studied in the 10-300 K temperature range upon excitation within the UV-VUV spectral range. The luminescence observed for LiPrP 4 O 12 at low temperatures is attributed to both intra-configurational 4f 2 → 4f 2 and inter-configurational 4f5d → 4f 2 radiative transitions of Pr 3+ . The temperature dependence of emission and the decay kinetics of Pr 3+ luminescence from LiY 1-x Pr x P 4 O 12 (x = 1, 0.1) phosphors are explained by temperature stimulated transitions from the 1 S 0 to the Pr 3+ 4f5d state. At low temperatures, the energy potential barrier between the 1 S 0 and 4f5d states is 0.014 eV for LiPrP 4 O 12 . The spectral overlap of the 1 S 0 and 4f5d states of Pr 3+ in LiY 0.9 Pr 0.1 P 4 O 12 determines the luminescence properties in the entire temperature range studied.

  14. Luminescent solutions and films of new europium complexes with chelating ligands

    Science.gov (United States)

    Kharcheva, Anastasia V.; Ivanov, Alexey V.; Borisova, Nataliya E.; Kaminskaya, Tatiana P.; Patsaeva, Svetlana V.; Popov, Vladimir V.; Yuzhakov, Viktor I.

    2015-03-01

    The development of new complexes of rare earth elements (REE) with chelating organic ligands opens up the possibility of purposeful alteration in the composition and structure of the complexes, and therefore tuning their optical properties. New ligands possessing two pyridine rings in their structure were synthesized to improve coordination properties and photophysical characteristics of REE compounds. Complexes of trivalent europium with novel chelating ligands were investigated using luminescence and absorption spectroscopy, as well as atomic force microscopy. Luminescence properties of new compounds were studied both for solutions and films deposited on the solid support. All complexes exhibit the characteristic red luminescence of Eu (III) ion with the absolute lumenescence quantum yield in polar acetonitrile solution varying from 0.21 to 1.45 % and emission lifetime ranged from 0.1 to 1 ms. Excitation spectra of Eu coordination complexes correspond with absorption bands of chelating ligand. The energy levels of the triplet state of the new ligands were determined from the phosphorescence at 77 K of the corresponding Gd (III) complexes. The morphology of films of europium complexes with different substituents in the organic ligands was investigated by atomic force microscopy (AFM). It strongly depends both on the type of substituent in the organic ligand, and the rotation speed of the spin-coater. New europium complexes with chelating ligands containing additional pyridine fragments represent outstanding candidates for phosphors with improved luminescence properties.

  15. Three-dimensional dose distribution of proton beams derived from luminescence images of water

    Science.gov (United States)

    Yamamoto, S.; Watabe, H.; Toshito, T.; Komori, M.

    2017-05-01

    We recently found that luminescence was emitted from water during proton irradiation at lower energy than the Cerenkov-light threshold and imaging was possible by using a CCD camera. However, since the measured distributions were projection images of the luminescence, precise dose estimations from the images were not possible. If the 3 dimensional images can be formed from the projection images, more precise dose information could be obtained. For this purpose, we calculate the 3-dimensional distribution of the proton beams from the luminescence images and use them for beam width estimations. We assumed that the proton beams have circular shape and the transverse images were reconstructed from the projection images using the filtered backprojection (FBP) algorithm for positron emission tomography (PET). The reconstructed images were compared to estimate the proton-beam widths with those obtained from the projection images and simulation results. We obtained 3-dimensional distributions of the proton beams from the projection images and also the reconstructed sagittal, coronal, and transverse images as well as volume rendering images. The estimated beam widths from the reconstructed images, which were slightly smaller than those obtained from the projection images, were identical to those calculated with the simulation. The 3-dimensional distributions of the luminescence images of water of proton beams could be reconstructed from the projection images and showed improved accuracy in estimating the beam widths of the proton beams.

  16. Luminescent golden silk and fabric through in situ chemically coating pristine-silk with gold nanoclusters.

    Science.gov (United States)

    Zhang, Pu; Lan, Jing; Wang, Yi; Xiong, Zu Hong; Huang, Cheng Zhi

    2015-01-01

    Silk is an excellent natural material and has been used for a variety of applications. Modification of the pristine silk is usually needed depending on the intended purpose. The technical treatments involved in the modification not only should be easy, rapid, environmentally friendly, and cheap but should also retain the features of the pristine silk. Herein, we demonstrate that luminescent silk and fabric can be produced through nanotechnology. The surface of the natural silk fiber is chemically coated with luminescent gold nanoclusters (AuNCs) composed of tens to hundreds of Au atoms through a redox reaction between the protein-based silk and an Au salt precursor. The luminescent silk coated with AuNCs (called golden silk) possesses good optical properties, including a relatively long wavelength emission, high quantum yields, a long fluorescent lifetime, and photostability. Moreover, golden silk prepared this way has better mechanical properties than pristine silk, is better able to inhibit UV, and has lower toxicity in vitro. This work not only provides an effective strategy for in situ preparation of luminescent metal nanoclusters on a solid substrate but also paves the way for large-scale and industrialized production of novel silk-based materials or fabrics through nanotechnology. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Luminescence spectroscopy of Rb2KTiOF5 oxyfluoride single crystals

    Science.gov (United States)

    Kozlov, A. V.; Pustovarov, V. A.; Sarychev, M. N.; Isaenko, L. I.

    2017-09-01

    Spectra of photoluminescence (PL) and X-ray excited luminescence (XRL) in region of 1.5-5.5 eV, PL excitation spectra using synchrotron radiation (3.7-22 eV), time-resolved impulse cathode-luminescence (ICL) spectra, the temperature depending of the XRL, decay kinetics as well as thermoluminescence curves were measured for single crystals Rb2KTiOF5, a promising nonlinear optical material. Single crystals are transparent in microwave, visible and near UV range, inter-band transition energy is Eg = 4.2 eV. Crystalline structure has two disordered mixed position O/F, phase transition in the region of 215 K. All the obtained results indicate that in luminescence spectra nonelementary band 2.2 eV is connected to the emission of self-trapped excitons. Nonelementary band 2.2 eV associated with the presence local distortion in the octahedron TiOF5. It is observed that at interband excitation in VUV region at energies more than 3.5 Eg the effect of multiplication of electronic excitations appears. That determines the high output of XRL and ICL. Luminescence methods of quality control of grown crystals are proposed.

  18. Controlled synthesis and luminescence properties of CaMoO4:Eu3+ microcrystals

    Science.gov (United States)

    Xie, Ying; Ma, Siming; Wang, Yu; Xu, Mai; Lu, Chengxi; Xiao, Linjiu; Deng, Shuguang

    2018-03-01

    Pure tetragonal-phased Ca0.9MoO4:0.1Eu3+ (CaMoO4:Eu3+) microcrystals with varying particle sizes were prepared via a co-deposition in water/oil (w/o) phase method. The particle sizes of as-prepared samples were controlled by calcination temperature and calcination time, and the crystallinity of the samples enhances with increasing particle size. The luminescence properties of CaMoO4:Eu3+ microcrystals were studied with varying particle size. The results reveal that the intensity of emission spectra of the CaMoO4:Eu3+ samples increases with increasing particle size, and they have closely correlation with each other. It is the same with the luminescence lifetime. The luminescence lifetime of the CaMoO4:Eu3+ samples decreases from 0.637 ms to 0.447 ms with increasing particle size from 0.12 μm to 1.79 μm, respectively. This study not only provides information for size-dependent luminescence properties of CaMoO4:Eu3+ but also gives a reference for potential applications in high voltage electric porcelain material.

  19. Tuning solid-state blue and red luminescence by the formation of solvate crystals.

    Science.gov (United States)

    Yan, Dongpeng; Fan, Guoling; Guan, Yan; Meng, Qingyun; Li, Congju; Wang, Jiaona

    2013-12-07

    Tuning and controlling the solid-state luminescence of molecular solids play a key role in developing multi-color displays and tunable dye laser. In this work, we report the tunable blue and red luminescence by the formation of solvate crystals of 1,4-bis(5-phenyl-2-oxazolyl)benzene (POPOP) and 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM). Upon introduction of guest solvents (chloroform and dichloromethane) into the POPOP and DCM host matrices, the obtained solvate crystals exhibit an alternated stacking arrangement, interaction fashion, and crystal symmetry compared with the pristine chromophore solids. Furthermore, the solvates of POPOP (CCl3H) and DCM (CCl2H2) present changeable luminescent properties (such as one-/two-photon emissive wavelength, fluorescence lifetime and photoluminescent quantum yield) in the blue/red regions relative to the pristine POPOP and DCM. In addition, the second harmonic generation can also be obtained for the DCM (CCl2H2) due to the transformation of the centrosymmetric to a non-centrosymmetric structure from pristine DCM. Periodic density functional theoretical calculations suggest that the guest solvents do not participate in the frontier orbital distribution within the solvate crystals. Therefore, by the combination of experimental and theoretical studies on the solvate crystals, this work not only reports the supramolecular assembly of new types of host-guest photoactive systems, but also provides a detailed understanding of the electronic structures of the solid-state luminescent materials.

  20. Recent advances in thermoluminescence and photostimulated luminescence detection methods for irradiated foods

    International Nuclear Information System (INIS)

    Sanderson, D.C.W.; Carmichael, L.A.; Naylor, J.D.

    1996-01-01

    Thermoluminescence (TL) and photostimulated luminescence (PSL) are radiation-specific phenomena resulting from energy storage by trapped charge carriers in dielectric materials following irradiation. Releasing such stored energy by thermal or optical stimulation can result in detectable luminescence emission during the relaxation processes which follow. These approaches can be applied to inorganic components present either as inherent parts of foods or as adhering contaminants, and to bio-inorganic systems. The strengths of these techniques lies in their radiation-specificity, and the wide range of sample types which may by analysed. The Scottish Universities Research and Reactor Centre (SURRC) has been involved in the development and application of luminescence methods since 1986, during which time over 4000 analyses of more than 800 different food samples have been performed for research purposes, or in support of UK food labelling regulations. This paper discusses the present scope of luminescence techniques, and identifies areas where recent work has extended the range of applications, and indicates areas where further investigations may be worthwhile. (author)

  1. Luminescence dating at Rose cottage cave: a progress report

    CSIR Research Space (South Africa)

    Woodborne, S

    1997-10-01

    Full Text Available Deal with infrared-stimulated luminescence and thermoluminescence dates from Rose Cottage Cave in South Africa. Discrepancy between luminescence and radiocarbon dates; Concentration of radioactive elements in sediments before and after leaching...

  2. Emissive sensors and devices incorporating these sensors

    Science.gov (United States)

    Swager, Timothy M; Zhang, Shi-Wei

    2013-02-05

    The present invention generally relates to luminescent and/or optically absorbing compositions and/or precursors to those compositions, including solid films incorporating these compositions/precursors, exhibiting increased luminescent lifetimes, quantum yields, enhanced stabilities and/or amplified emissions. The present invention also relates to sensors and methods for sensing analytes through luminescent and/or optically absorbing properties of these compositions and/or precursors. Examples of analytes detectable by the invention include electrophiles, alkylating agents, thionyl halides, and phosphate ester groups including phosphoryl halides, cyanides and thioates such as those found in certain chemical warfare agents. The present invention additionally relates to devices and methods for amplifying emissions, such as those produced using the above-described compositions and/or precursors, by incorporating the composition and/or precursor within a polymer having an energy migration pathway. In some cases, the compositions and/or precursors thereof include a compound capable of undergoing a cyclization reaction.

  3. Correlation of the coloring and the luminescent properties

    International Nuclear Information System (INIS)

    Negron M, A.; Ramos B, S.; Frias, D.; Sanchez M, G.

    2007-01-01

    Full text: The correlation of this first stage F-center coloring with the thermoluminescent properties of the single crystal give a possible evaluation of low doses using the first stage F-center curve. The first stage of F-center coloring in quenched samples of Sr doped NaCl single crystal has been reproduced by a mathematical model of the defects reactions induced by radiation. The samples were irradiated with gamma rays and the F-centers were identified by its characteristic F absorption band. The thermoluminescence emission was measured before and after room temperature optical bleaching with F-light. The results suggested that the F-centers plays an important role in the thermally stimulated luminescence process. (Author)

  4. Luminescence and squeezing of a superconducting light-emitting diode

    Science.gov (United States)

    Hlobil, Patrik; Orth, Peter P.

    2015-05-01

    We investigate a semiconductor p -n junction in contact with superconducting leads that is operated under forward bias as a light-emitting diode. The presence of superconductivity results in a significant increase of the electroluminescence in a sharp frequency window. We demonstrate that the tunneling of Cooper pairs induces an additional luminescence peak on resonance. There is a transfer of superconducting to photonic coherence that results in the emission of entangled photon pairs and squeezing of the fluctuations in the quadrature amplitudes of the emitted light. We show that the squeezing angle can be electrically manipulated by changing the relative phase of the order parameters in the superconductors. We finally derive the conditions for lasing in the system and show that the laser threshold is reduced due to superconductivity. This reveals how the macroscopic coherence of a superconductor can be used to control the properties of light.

  5. Luminescence and fluorometric sensors for environmental field screening

    Energy Technology Data Exchange (ETDEWEB)

    Eastwood, D. [Lockheed Environmental Systems and Technologies Company, Las Vegas, NV (United States)

    1994-12-31

    Several state-of-the-art luminescence (UV-vis fluorescence or phosphorescence) techniques have been studied for environmental field screening applications leading to qualitative (fingerprinting) or quantitative analytical methods for soil or water. A variety of pollutants were analyzed including petroleum oils, fuels and creosotes, polyaromatic hydrocarbons (PAHS), PCBs and pesticides, heavy metals and uranium. A field portable spectrofluorometer developed by ORNL (T. Vo-Dinh and J.P. Alarie), ideal for PAH monitoring, was evaluated using both synchronous and emission techniques. The latest innovative approaches for synchronous and other fluorescence spectroscopic techniques continue to be studied. Feasibility studies were performed for possible substrates and coatings for solid states sensors. Several fluorometric sensors for metals, uranium and other pollutants are currently being developed in collaboration with colleagues at universities and national laboratories and the general approaches will be discussed.

  6. Optical characterization of luminescent silicon nanocrystals embedded in glass matrices

    Energy Technology Data Exchange (ETDEWEB)

    Debieu, Olivier

    2008-12-16

    Interstellar dust in nebulae and in the Diffuse Interstellar Medium (DISM) of galaxies contains a component which exhibits efficient visible-near infrared luminescence ranging from 500 to 1000 nm, known as Extended Red Emission (ERE). Silicon nanocrystals (nc-Si) are discussed as possible carriers of the ERE. We employed the accelerator facilities of the Institute of Solid State Physics of the University of Jena to implant Si ions into fused silica windows. An excess concentration of silicon atoms is thus produced in the host SiO{sub 2} matrix which, by applying an annealing at 1100 C, condensates to silicon nanoparticles and crystallizes. Although the condensation and crystallization occur after an annealing of one minute,10, 15 the samples were annealed during one hour in order to well-passivate the nc-Si, that means, to reduce effectively the number of Si-dangling bonds at the nc-Si surface that are efficient non-radiative recombination centers. 10, 16 Upon excitation with UV light, most of our nc-Si/SiO{sub 2} samples revealed strong PL. We implanted into our luminescent nc-Si/SiO{sub 2} systems other atomic elements, as for instance magnesium and calcium, which form silicates if their oxide is combined with SiO{sub 2}. The purpose is to simulate the conditions for silicates containing nc-Si. In order to understand the effect of the incorporation of foreign atoms on the PL properties of our nc-Si/SiO{sub 2} systems, we proceeded to similar experiments with Er and Ge. As has been demonstrated by several authors, 17, 18 the presence of nc-Si in a glass matrix enhances considerably the emission of Er{sup 3+} ions at 1.536{mu}m. At the same time, the PL of nc-Si is considerably quenched. Since the solubility of Er in crystalline silicon is about 2 orders of magnitude lower than in SiO{sub 2}, the optically active Er{sup 3+} ions are believed to be localized outside the nc-Si core, demonstrating that ions present in the host SiO{sub 2} matrix influence the PL

  7. Characterization of dehydration-induced luminescence of kaolinite.

    Science.gov (United States)

    Lahav, N; Coyne, L; Lawless, J G

    1985-01-01

    Dehydration-induced luminescence (DIL), the emission of light from a clay paste upon dehydration, was characterized experimentally for a colloidal kaolinite. The relationship between total photon count of the emitted light and film thickness is linear up to a thickness of 30 micrometers. The photon emission was obtained over a critical range of water contents (25-60%) of the oven-dry clay, and the kinetics of photon emission was presumed to be closely associated with the kinetics of film dehydration. Whether drying proceeded throughout the bulk or via a moving front was undetermined, but in either mode it was preceded by the formation of a thin dry film at the interface with the atmosphere. Grinding of the kaolinite for several minutes by mortar and pestle before paste preparations resulted in an overall increase of photon emission compared to unground kaolinite and in the formation of more than one emission peak, as well as a prolongation of the light emission. This effect on the kinetics of light emittance was observed for about two months after the application of the mechanical stress and suggests a means of detecting the mechanical stress history of a clay. An estimate was made of the spectral characteristics of the emitted light using optical filters and by incorporating tryptophan and salicylic acid into the kaolinite paste where they acted as fluorescent probes. The latter technique shifted the frequency of the light emitted by the kaolinite from the ultraviolet to the visible range where it was less effectively reabsorbed. The first method showed that the wavelengths of 97% of the emitted light was <460 nm and that 75% of the light had wavelengths < 410 nm. The second method showed that the total intensity of DIL increased in the presence of fluorescence molecules, suggesting that the emittance was in the ultraviolet range.

  8. Intraligand Charge Transfer Sensitization on Self-Assembled Europium Tetrahedral Cage Leads to Dual-Selective Luminescent Sensing toward Anion and Cation.

    Science.gov (United States)

    Liu, Cui-Lian; Zhang, Rui-Ling; Lin, Chen-Sheng; Zhou, Li-Peng; Cai, Li-Xuan; Kong, Jin-Tao; Yang, Song-Qiu; Han, Ke-Li; Sun, Qing-Fu

    2017-09-13

    Luminescent supramolecular lanthanide edifices have many potential applications in biology, environments, and materials science. However, it is still a big challenge to improve the luminescent performance of multinuclear lanthanide assemblies in contrast to their mononuclear counterparts. Herein, we demonstrate that combination of intraligand charge transfer (ILCT) sensitization and coordination-driven self-assembly gives birth to bright Eu III tetrahedral cages with a record emission quantum yield of 23.1%. The ILCT sensitization mechanism has been unambiguously confirmed by both time-dependent density functional theory calculation and femtosecond transient absorption studies. Meanwhile, dual-responsive sensing toward both anions and cations has been demonstrated making use of the ILCT transition on the ligand. Without introduction of additional recognition units, high sensitivity and selectivity are revealed for the cage in both turn-off luminescent sensing toward I - and turn-on sensing toward Cu 2+ . This study offers important design principles for the future development of luminescent lanthanide molecular materials.

  9. Progress in phosphors and filters for luminescent solar concentrators

    NARCIS (Netherlands)

    De Boer, D.K.G.; Broer, D.J.; Debije, M.G.; Keur, W.C.; Meijerink, A.; Ronda, C.R.; Verbunt, P.P.C.

    2012-01-01

    Luminescent solar concentrators would allow for high concentration if losses by reabsorption and escape could be minimized. We introducea phosphor with close-to-optimal luminescent properties and hardlyany reabsorption. A problem for use in a luminescent concentrator isthe large scattering of this

  10. Near-Field Spectroscopy of the Quantum Constituents of a Luminescent System

    Science.gov (United States)

    Hess, H. F.; Betzig, E.; Harris, T. D.; Pfeiffer, L. N.; West, K. W.

    1994-06-01

    Luminescent centers with sharp (<0.07 millielectron volt), spectrally distinct emission lines were imaged in a GaAs/AlGaAs quantum well by means of low-temperature near-field scanning optical microscopy. Temperature, magnetic field, and linewidth measurements establish that these centers arise from excitons laterally localized at interface fluctuations. For sufficiently narrow wells, virtually all emission originates from such centers. Near-field microscopy/spectroscopy provides a means to access energies and homogeneous line widths for the individual eigenstates of these centers, and thus opens a rich area of physics involving quantum resolved systems.

  11. An optically stimulated luminescence study of flint related to radiation dosimetry

    DEFF Research Database (Denmark)

    Poolton, N.R.J.; Bøtter-Jensen, L.; Rink, W.J.

    1995-01-01

    This article describes the essential features of photo-stimulated luminescence in flint. The emission is shown to be complex, arising from a number of different aspects of the material. Under constant illumination, dose-dependent time-decaying anti-Stokes signals are superimposed on dose......-independent, time-stable emission that is both Stokes and anti-Stokes shifted in energy. It is argued that the dose-dependent signals arise from the crystalline quartz phase of the material, whereas the dose independent signals originate from an amorphous-like phase of SiO2. The microcrystallinity of the material...

  12. Magnetic and luminescent properties of vanadium-doped ZnSe crystals

    Energy Technology Data Exchange (ETDEWEB)

    Radevici, Ivan, E-mail: ivarad@utu.fi [Wihuri Physical Laboratory, Department of Physics and Astronomy, University of Turku, FI-20014 Turku (Finland); Faculty of Physics and Engineering, Moldova State University, 60 A. Mateevici str., MD-2009 Chisinau (Moldova, Republic of); Nedeoglo, Natalia; Sushkevich, Konstantin [Faculty of Physics and Engineering, Moldova State University, 60 A. Mateevici str., MD-2009 Chisinau (Moldova, Republic of); Huhtinen, Hannu [Wihuri Physical Laboratory, Department of Physics and Astronomy, University of Turku, FI-20014 Turku (Finland); Nedeoglo, Dmitrii [Faculty of Physics and Engineering, Moldova State University, 60 A. Mateevici str., MD-2009 Chisinau (Moldova, Republic of); Paturi, Petriina [Wihuri Physical Laboratory, Department of Physics and Astronomy, University of Turku, FI-20014 Turku (Finland)

    2016-12-15

    Magnetic and photoluminescence properties of vanadium-doped ZnSe crystals with impurity concentrations varied by changing the V amount in the source material from 0.03 to 0.30 at% are studied in 5–300 K temperature range. Investigation of magnetic properties shows that the studied concentrations of vanadium impurity that should not disturb crystal lattice are insignificant for observing ferromagnetic behaviour even at low temperatures. The contribution of V impurity to edge emission and its influence on infra-red emission are discussed. Similarities of magnetic and luminescent properties induced by vanadium and other transition metal impurities are discussed.

  13. Taking advantage of luminescent lanthanide ions.

    Science.gov (United States)

    Bünzli, Jean-Claude G; Piguet, Claude

    2005-12-01

    Lanthanide ions possess fascinating optical properties and their discovery, first industrial uses and present high technological applications are largely governed by their interaction with light. Lighting devices (economical luminescent lamps, light emitting diodes), television and computer displays, optical fibres, optical amplifiers, lasers, as well as responsive luminescent stains for biomedical analysis, medical diagnosis, and cell imaging rely heavily on lanthanide ions. This critical review has been tailored for a broad audience of chemists, biochemists and materials scientists; the basics of lanthanide photophysics are highlighted together with the synthetic strategies used to insert these ions into mono- and polymetallic molecular edifices. Recent advances in NIR-emitting materials, including liquid crystals, and in the control of luminescent properties in polymetallic assemblies are also presented. (210 references.).

  14. System of gigantic valleys northwest of Tharsis, Mars: Latent catastrophic flooding, northwest watershed, and implications for northern plains ocean

    Science.gov (United States)

    Dohm, J.M.; Anderson, R.C.; Baker, V.R.; Ferris, J.C.; Hare, T.M.; Strom, R.G.; Rudd, L.P.; Rice, J. W.; Casavant, R.R.; Scott, D.H.

    2000-01-01

    Mars Orbiter Laser Altimeter (MOLA) reveals a system of gigantic valleys to the northwest of the huge martian shield volcano, Arsia Mons, in the western hemisphere of Mars. These newly identified northwestern slope valleys (NSVs) potentially signify previously undocumented martian catastrophic floods and may corroborate the northern ocean hypotheses. These features, which generally correspond spatially to gravity lows, were previously obscurred in Mariner and Viking Orbiter imagery by veneers of materials, including volcanic lava flows and air fall deposits. Geologic investigations of the Tharsis region suggest that the NSVs were mainly carved prior to the construction of Arsia Mons and its associated Late Hesperian and Amazonian age lava flows, concurrent with the early development of the outflow channels that debouch into Chryse Planitia.

  15. LIDERAZGO, LA COMPETENCIA ESENCIAL QUE TRANSFORMÓ UNA EMPRESA COLOMBIANA EN UN GIGANTE INTERNACIONAL: EL CASO DE CEMENTOS ARGOS

    Directory of Open Access Journals (Sweden)

    HÉCTOR OCHOA DÍAZ

    2011-01-01

    Full Text Available Cementos Argos ha sido catalogado como uno de los gigantes de la industria cementera colombiana por su gran capacidad de consolidación en el mercado nacional y sus estrategias de internacionalización poco convencionales. Esta investigación documenta la experiencia internacional de Argos bajo la perspectiva de las teorías de internacionalización de mayor aceptación en laliteratura internacional, haciendo uso del enfoque metodológico de los estudios de caso. Como resultado se encontró que las estrategias de fidelización,aunadas al rediseño organizacional resultado del liderazgo de la alta gerencia, han sido herramientas vitales para asegurar el crecimiento de la compañía en los mercados local y externo.

  16. Liderazgo, la competencia esencial que transformó una empresa colombiana en un gigante internacional : el caso de Cementos Argos

    Directory of Open Access Journals (Sweden)

    Héctor Ochoa Díaz, Ph.D.

    2011-09-01

    Full Text Available Cementos Argos ha sido catalogado como uno de los gigantes de la industria cementera colombiana por su gran capacidad de consolidación en el mercado nacional y sus estrategias de internacionalización poco convencionales. Esta investigación documenta la experiencia internacional de Argos bajo la perspectiva de las teorías de internacionalización de mayor aceptación en la literatura internacional, haciendo uso del enfoque metodológico de los estudios de caso. Como resultado se encontró que las estrategias de fidelización, aunadas al rediseño organizacional resultado del liderazgo de la alta gerencia, han sido herramientas vitales para asegurar el crecimiento de la compañía en los mercados local y externo.

  17. Host Excitation Induced Red Emission from Pr3+ in Strontium Bairum Niobate Thin Film

    National Research Council Canada - National Science Library

    Liu, Hi

    2004-01-01

    .... At 10 K, the main emission peak splits into four components. In addition, a broadband SBN-host luminescence was identified at 560 nm in the annealed sample, associated with the charge-transfer vibronic exciton...

  18. Host Excitation-Induced Red Emission from Pr3+ in Strontium Barium Niobate Thin Film

    National Research Council Canada - National Science Library

    Liu, H

    2004-01-01

    .... At 10K, the main emission peak splits into four components. In addition, a broadband SBN-host luminescence was identified at 560 nm in the annealed sample, associated with the charge-transfer vibronic exciton...

  19. Luminescence dating of glaciofluvial deposits: A review

    Science.gov (United States)

    Thrasher, I. M.; Mauz, B.; Chiverrell, R. C.; Lang, A.

    2009-12-01

    For glacigenic sediments, Optically Stimulated Luminescence (OSL) dating offers an opportunity to date the time of deposition of quartz and feldspar minerals that are ubiquitous within the sediment matrix, rather than relying upon the chance occurrence of organic material for radiocarbon dating. The OSL dating signal or charge accumulates in crystal defects of individual quartz and feldspar minerals through exposure to environmental radiation within their depositional setting. The OSL signal within individual grains can be reset or bleached through exposure to daylight during transportation processes. Thus OSL dating of sediments attempts to determine the time elapsed since burial. Glacigenic sediments present considerable challenges for OSL dating not only in terms of poor bleaching of the OSL signal during the transport and deposition cycle, but also poor quartz luminescence characteristics which are often related to sediment provenance, the nature of the bedrock or source material, and the freshly eroded nature of many such deposits. This paper reviews luminescence dating techniques as applied to glaciofluvial sediments and explores the challenges that such deposits present to the technique. Successful application of OSL techniques can be judged in a number of ways: comparison with the 'independent' chronologies is prevalent in the literature, but recently the movement towards measurement of large numbers of small aliquots and single grains allows a more robust assessment of luminescence properties and behaviour for individual samples and ultimately more precise luminescence ages to be determined. For glaciofluvial sediments in particular, it is important to investigate the depositional sub-environment of each sample in relation to the chance of sufficient bleaching during transport and deposition. A lithofacies-based approach to sampling for optically stimulated luminescence dating of these sediments is suggested whereby hypothetically well-bleached deposits

  20. Comparative study of the luminescence of structures with Ge nanocrystals formed by dry and wet oxidation of SiGe films

    International Nuclear Information System (INIS)

    RodrIguez, A; Ortiz, M I; Sangrador, J; RodrIguez, T; Avella, M; Prieto, A C; Torres, A; Jimenez, J; Kling, A; Ballesteros, C

    2007-01-01

    The luminescence emission of structures containing Ge nanocrystals embedded in a dielectric matrix obtained by dry and wet oxidation of polycrystalline SiGe layers has been studied as a function of the oxidation time and initial SiGe layer thickness. A clear relationship between the intensity of the luminescence, the structure of the sample, the formation of Ge nanocrystals and the oxidation process parameters that allows us to select the appropriate process conditions to get the most efficient emission has been established. The evolution of the composition and thickness of the growing oxides and the remaining SiGe layer during the oxidation processes has been characterized using Raman spectroscopy, x-ray diffraction, Fourier-transform infrared spectroscopy, Rutherford backscattering spectrometry and transmission electron microscopy. For dry oxidation, the luminescence appears suddenly, regardless of the initial SiGe layer thickness, when all the Si of the SiGe has been oxidized and the remaining layer of the segregated Ge starts to be oxidized forming Ge nanocrystals. Luminescence is observed as long as Ge nanocrystals are present. For wet oxidation, the luminescence appears from the first stages of the oxidation, and is related to the formation of Ge-rich nanoclusters trapped in the mixed (Si and Ge) growing oxide. A sharp increase of the luminescence intensity for long oxidation times is also observed, due to the formation of Ge nanocrystals by the oxidation of the layer of segregated Ge. For both processes the luminescence is quenched when the oxidation time is long enough to cause the full oxidation of the Ge nanocrystals. The intensity of the luminescence in the dry oxidized samples is about ten times higher than in the wet oxidized ones for equal initial thickness of the SiGe layer

  1. From Antenna to Assay: Lessons Learned in Lanthanide Luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Evan; Samuel, Amanda; Raymond, Kenneth

    2008-09-25

    Ligand-sensitized luminescent lanthanide(III) complexes are of considerable current interest due to their unique photophysical properties (micro- to millisecond lifetimes, characteristic and narrow emission bands, and large Stokes shifts), which make them well suited to serve as labels in fluorescence-based bioassays. The long-lived Ln(III) emission can be temporally resolved from scattered light and background fluorescence, resulting in vastly enhanced measurement sensitivity. One of the challenges in this field is the design of sensitizing ligands that provide highly emissive Ln(III) complexes that also possess sufficient stability and aqueous solubility required for practical applications. In this account we give an overview of some of the general properties of the trivalent lanthanides and follow with a summary of advances made in our laboratory in the development of highly luminescent Tb(III) and Eu(III) complexes for applications in biotechnology. A focus of our research has been the optimization of these compounds as potential commercial agents for use in Homogeneous Time Resolved Fluorescence (HTRF) technology, the requirements and current use of which will be briefly discussed. Our approach involves developing high-stability octadentate Tb(III) and Eu(III) complexes that rely on all-oxygen donor atoms as well as using multi-chromophore chelates to increase molar absorptivity compared to earlier examples that utilize a single pendant antenna chromophore. We have found that ligands based on 2-hydroxyisophthalamide (IAM) provide exceptionally emissive Tb(III) complexes with quantum yield values up to ca. 60%. Solution thermodynamic studies have indicated that these complexes are stable at the nanomolar concentrations required for commercial assays. Through synthetic modification of the IAM-chromophore, in conjunction with time-dependent density functional theory (TD-DFT) calculations, we have developed a method to predict absorption and emission properties of

  2. Luminescence behaviour of beryl (aquamarine variety) from Turkey

    International Nuclear Information System (INIS)

    Katı, M.I.; Türemis, M.; Keskin, I.C.; Tastekin, B.; Kibar, R.; Çetin, A.; Can, N.

    2012-01-01

    Natural blue-green beryl from Turkey has been investigated using scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD) and Cathodoluminescence (CL). Beryl has the chemical formula Be 3 Al 2 Si 6 O 18 and is hexagonal with space group P6/mcc. Chemical analyses of the beryl sample utilised inductively coupled plasma-atomic emission spectroscopy (ICP-AES) for major oxides and trace elements. It shows that the beryl sample is rich in Cs (531 ppm) and contains low concentrations of transition-metal ions, in total 2.29 wt.% Fe, 269 ppm Mn, V<5 ppm and Cr 20 ppm. Ideas on the origin of the green colour of this mineral are presented. The CL spectrum of the bulk sample display intense broad band emission from ∼360 to ∼800 nm. - Highlights: ► Natural blue-green beryl from Turkey were investigated by SEM-EDS, XRD, CL. ► Luminescence behaviour of Natural blue-green beryl. ► The samples exhibit an intense broad band emission from ∼360 to ∼800 nm.

  3. Luminescence behaviour of beryl (aquamarine variety) from Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Kat Latin-Small-Letter-Dotless-I , M.I.; Tueremis, M.; Keskin, I.C.; Tastekin, B.; Kibar, R.; Cetin, A. [Celal Bayar University, Faculty of Arts and Sciences, Physics Department, 45140 Manisa (Turkey); Can, N., E-mail: cannurdogan@yahoo.com [Celal Bayar University, Faculty of Arts and Sciences, Physics Department, 45140 Manisa (Turkey)

    2012-10-15

    Natural blue-green beryl from Turkey has been investigated using scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD) and Cathodoluminescence (CL). Beryl has the chemical formula Be{sub 3}Al{sub 2}Si{sub 6}O{sub 18} and is hexagonal with space group P6/mcc. Chemical analyses of the beryl sample utilised inductively coupled plasma-atomic emission spectroscopy (ICP-AES) for major oxides and trace elements. It shows that the beryl sample is rich in Cs (531 ppm) and contains low concentrations of transition-metal ions, in total 2.29 wt.% Fe, 269 ppm Mn, V<5 ppm and Cr 20 ppm. Ideas on the origin of the green colour of this mineral are presented. The CL spectrum of the bulk sample display intense broad band emission from {approx}360 to {approx}800 nm. - Highlights: Black-Right-Pointing-Pointer Natural blue-green beryl from Turkey were investigated by SEM-EDS, XRD, CL. Black-Right-Pointing-Pointer Luminescence behaviour of Natural blue-green beryl. Black-Right-Pointing-Pointer The samples exhibit an intense broad band emission from {approx}360 to {approx}800 nm.

  4. Luminescence in Li₃ Al ₂ (PO₄)₃ :Eu(2+).

    Science.gov (United States)

    Shinde, K N; Park, K

    2013-01-01

    A series of efficient Li₃ Al ₂ (PO₄)₃ :Eu(2+) novel phosphors were synthesized by the facile combustion method. The effects of dopant on the luminescence behavior of Li₃ Al ₂ (PO₄)₃ phosphor were also investigated. The phosphors were characterized by X-ray diffraction, field emission scanning electron microscope and photoluminescence techniques. The result shows that all samples can be excited efficiently by near-ultraviolet excitation under 310 nm. The emission was observed for Li₃ Al ₂ (PO₄)₃ :Eu(2+) phosphor at 425 nm, which corresponded to the d → f transition. The concentration quenching of Eu(2+) was observed in Li₃ Al ₂ (PO₄)₃ :Eu(2+) when the Eu concentration was at 0.5 mol%. The prepared powders exhibited intense blue emission at the 425 nm owing to the Eu(2+) ion by Hg-free excitation at 310 nm (i.e., solid-state lighting excitation). Consequently, the availability of such a phosphor will significantly help in the development of blue-emitting solid-state lighting applications. Copyright © 2012 John Wiley & Sons, Ltd.

  5. Effect of Soluble Sulfide on the Activity of Luminescent Bacteria

    Directory of Open Access Journals (Sweden)

    Feng Wang

    2012-05-01

    Full Text Available Sulfide is an important water pollutant widely found in industrial waste water that has attracted much attention. S2−, as a weak acidic anion, is easy hydrolyzed to HS and H2S in aqueous solution. In this study, biological tests were performed to establish the toxicity of sulfide solutions on luminescent bacteria. Considering the sulfide solution was contained three substances—S2−, HS and H2S—the toxicity test was performed at different pH values to investigate which form of sulfide increased light emission and which reduced light emission. It was shown that the EC50 values were close at pH 7.4, 8.0 and 9.0 which were higher than pH 5 and 10. The light emission and sulfide concentrations displayed an inverse exponential dose-response relationship within a certain concentration range at pH 5, 6.5 and 10. The same phenomenon occurred for the high concentration of sulfide at pH 7.4, 8 and 9, in which the concentration of sulfide was HS >> H2S > S2−. An opposite hormesis-effect appeared at the low concentrations of sulfide.

  6. Coherent effects in semiconductor light emission

    Science.gov (United States)

    Kira, M.; Jahnke, Frank; Hoyer, W.; Koch, Stephan W.

    2000-03-01

    Coherent signatures in the semiconductor light emission are studied using a fully quantum mechanical theory for the system of photons and Coulomb interacting electron-hole pairs. The dominant light-matter correlations couple the semiconductor Bloch and luminescence equations yielding significant quantum corrections. A coherent excitation leads to squeezing of the emitted light as well as to entanglement between light and matter.

  7. Chiroptical luminescence spectra of UO22+ in cubic Na[UO2(CH3COO)3] crystals

    International Nuclear Information System (INIS)

    Moran, D.M.; Metcalf, D.H.; Richardson, F.S.

    1992-01-01

    Steady-state chiroptical luminescence measurements are reported for cubic crystals of Na[UO 2 (CH 3 COO) 3 ]. These crystals belong to the enantiomorphic space group P2 1 3, with four molecules per unit cell, and each UO 2 (CH 3 COO) 3 - coordination unit has a chiral tris-bidentate chelate structure of C 3 symmetry. The UO 2 O' 6 coordination clusters (where O' denotes an acetate oxygen donor atom) also have chiral structures of C 3 point-group symmetry, but they deviate only slightly from an achiral D 3h symmetry. The luminescence observed for Na[UO 2 (CH 3 COO) 3 ] is assigned to transitions that originate from the lowest electronic excited state (II g ) of UO 2 2+ and terminate on the ground electronic state (Σ g + ). At least two types of UO 2 2+ species contribute to this luminescence, but the luminescence spectra can be analyzed in terms of separate majority species (or bulk site) contributions and minority species (or defect site) contributions. The luminescence spectra show zero-phonon origin lines, one-phonon false-origin lines, and vibronic progressions in the symmetric stretching mode (ν s ) of UO 2 2+ . The false-origin lines and the progressions based on these lines are essentially unpolarized. However, the origin lines and their progressions exhibit a very large degree of circular polarization, with emission dissymmetry factors of g em = 1.31 (majority species) and g em = 0.96 (minority species). The circularly polarized luminescence results for Σ g + left-arrow II g emission are compared to circular dichroism results for Σ g + → II g absorption, and the distribution of Σ g + ↔ II g electronic rotary strength among origin and vibronic lines is discussed within the context of vibronic optical activity theory

  8. Luminescence properties of Yb:Nd:Tm:KY3F10 nanophosphor and thermal treatment effects

    International Nuclear Information System (INIS)

    Gomes, Laércio; Linhares, Horácio Marconi da Silva M.D.; Ichikawa, Rodrigo Uchida; Martinez, Luis Gallego; Ranieri, Izilda Marcia

    2015-01-01

    In this work, we present the spectroscopic properties of KY 3 F 10 (KY3F) nanocrystals activated with thulium and codoped with ytterbium and neodymium ions. The most important processes that lead to the thulium upconversion emissions in the blue region were identified. A time-resolved luminescence spectroscopy technique was employed to measure the luminescence decays and to determine the most important mechanisms involved in the upconversion process that populates 1 G 4 (Tm 3+ ) excited states. Analysis of the energy-transfer processes dynamics using selective pulsed-laser excitations in Yb:Nd:Tm, Nd:KY3F nanocrystals shows that the direct energy transfer from Nd 3+ to Tm 3+ ions is the mechanism responsible for the 78% of the blue upconversion luminescence in the Yb:Nd:Tm:KY3F when compared with the Yb:Nd:Tm:KY3F bulk crystal for an laser excitation at 802 nm. An investigation of the 1 G 4 level luminescence kinetic of Tm 3+ in Yb/Nd/Tm system revealed that the luminescence efficiency ( 1 G 4 ) starts with a very low value (0.38%) for the synthesized nanocrystal (as grown) and strongly increases to 97% after thermal treatment at 550 °C for 6 h under argon flow. As a consequence of the thermal treatment at T=550 °C, the contributions of the (Nd×Tm) (Up 1 ) and (Nd×Yb×Tm) (Up 2 ) upconversion processes to the 1 G 4 luminescence are 33% (Up 1 ) and 67% for Up 2 . Up 2 process represented by Nd 3+ ( 4 F 3/2 )→Yb 3+ ( 2 F 7/2 ) followed by Yb 3+ ( 2 F 5/2 )→Tm ( 3 H 4 )→Tm 3+ ( 1 G 4 ) was previously reported as the main mechanism to produce the blue luminescence in Yb:Nd:Tm:YLiF 4 and KY 3 F 10 bulk crystals. Results of X-ray diffraction analysis of nanopowder using the Rietveld method reveled that crystallite sizes remain unchanged (12–14 nm) after thermal treatments with T≤400 °C, while the 1 G 4 luminescence efficiency strongly increases from 0.38% (T=25 °C) to 12% (T=400 °C). Results shown that the Nd 3+ ions distribution has a concentration

  9. Heterostructure of Au nanocluster tipping on a ZnS quantum rod: controlled synthesis and novel luminescence.

    Science.gov (United States)

    Tian, Yang; Wang, Ligang; Yu, Shanshan; Zhou, Weiwei

    2015-08-14

    Heterostructures of metal nanoparticles and semiconductors are widely studied for their unique properties. However, few reports are available on the heterostructure of metal nanoclusters and semiconductors. In the present study, a heterostructure, in which gold nanoclusters selectively locate at ZnS quantum rod (QR) tips, was fabricated using a two-step solvothermal route. The composition, intrinsic crystallography, and junction of the prepared heterostructure were thoroughly investigated, and it was observed to exhibit novel luminescent behaviours. By comparison with the individual components of ZnS QRs and gold clusters, the resultant heterostructure shows an enhanced exciton emission and complete depression of defect emission for the ZnS component, and a pronounced red emission for the gold nanocluster component. The mechanism of these properties and the charge transfer between gold nanoclusters and ZnS QRs were also explored. The size and location of gold in the heterostructure were also controlled during synthesis to study their effects on the luminescence.

  10. Electric current induced light emission from C-60

    NARCIS (Netherlands)

    Palstra, TTM; Haddon, RC; Lyons, KB; Kafafi, ZH

    1997-01-01

    We report the luminescence of C-60 crystals and films due to the passage of an electrical current. The current-voltage behaviour is highly non-linear with light-emission beyond a threshold voltage. The emission spectrum is featureless and resembles black body radiation with an effective temperature

  11. Electric Current Induced Light Emission from C60

    NARCIS (Netherlands)

    Palstra, T.T.M.; Haddon, R.C.; Lyons, K.B.

    1997-01-01

    We report the luminescence of C60 crystals and films due to the passage of an electrical current. The current-voltage behavior is highly non-linear with light-emission beyond a threshold voltage. The emission spectrum is featureless and resembles black-body radiation with an effective temperature on

  12. Near ultraviolet to near infrared luminescence spectroscopy of Er3+ doped K2GdF5 crystal

    International Nuclear Information System (INIS)

    Qin, Yanguang; Wei, Xiantao; Li, Xinyue; Chen, Yonghu; Yin, Min

    2014-01-01

    The detailed luminescent properties of K 2 GdF 5 crystal doped with Er 3+ was investigated using excitation spectra, emission spectra and emission decay curve measurements. The excitation bands corresponding to the characteristic Gd 3+ 4f–4f transitions in the excitation spectra of Er 3+ emission indicate an efficient energy transfer from host Gd 3+ to doping Er 3+ ions. Meanwhile, the distinct features observed only in the emission spectra excited with shorter wavelengths (≤312 nm) are assigned to the transitions from 2 P 3/2 levels of Er 3+ . This assignment is further supported by the decay curves measurements and the obtained lifetime of 2 P 3/2 emission (460 μs) is longer than that of 4 S 3/2 emission (248 μs). The luminescence in near infrared (NIR) range from 750 to 1650 nm consists of several well-distinguished bands dominated by the emission around 1540 nm corresponding to the transition of 4 I 13/2 → 4 I 15/2 . NIR quantum cutting processes are observed and discussed with reference to the NIR emission spectra. - Highlights: • Energy transfer from host Gd 3+ to doping Er 3+ ions is efficient. • The transitions from 2 P 3/2 dominate the emissions when excited with shorter wavelengths (≤312 nm). • The lifetime of 2 P 3/2 emissions (460 μs) is longer than that of 4 S 3/2 (248 μs). • The NIR luminescence in the range from 750 to 1650 nm consists of six bands. • NIR quantum cutting processes are observed

  13. Lanthanide luminescence for functional materials and bio-sciences.

    Science.gov (United States)

    Eliseeva, Svetlana V; Bünzli, Jean-Claude G

    2010-01-01

    Recent startling interest for lanthanide luminescence is stimulated by the continuously expanding need for luminescent materials meeting the stringent requirements of telecommunication, lighting, electroluminescent devices, (bio-)analytical sensors and bio-imaging set-ups. This critical review describes the latest developments in (i) the sensitization of near-infrared luminescence, (ii) "soft" luminescent materials (liquid crystals, ionic liquids, ionogels), (iii) electroluminescent materials for organic light emitting diodes, with emphasis on white light generation, and (iv) applications in luminescent bio-sensing and bio-imaging based on time-resolved detection and multiphoton excitation (500 references).

  14. New Nanomaterials and Luminescent Optical Sensors for Detection of Hydrogen Peroxide

    Directory of Open Access Journals (Sweden)

    Natalia A. Burmistrova

    2015-10-01

    Full Text Available Accurate methods that can continuously detect low concentrations of hydrogen peroxide (H2O2 have a huge application potential in biological, pharmaceutical, clinical and environmental analysis. Luminescent probes and nanomaterials are used for fabrication of sensors for H2O2 that can be applied for these purposes. In contrast to previous reviews focusing on the chemical design of molecular probes for H2O2, this mini-review highlights the latest luminescent nanoparticular materials and new luminescent optical sensors for H2O2 in terms of the nanomaterial composition and luminescent receptor used in the sensors. The nanomaterial section is subdivided into schemes based on gold nanoparticles, polymeric nanoparticles with embedded enzymes, probes showing aggregation-induced emission enhancement, quantum dots, lanthanide-based nanoparticles and carbon based nanomaterials, respectively. Moreover, the sensors are ordered according to the type of luminescent receptor used within the sensor membranes. Among them are lanthanide complexes, metal-ligand complexes, oxidic nanoparticles and organic dyes. Further, the optical sensors are confined to those that are capable to monitor the concentration of H2O2 in a sample over time or are reusable. Optical sensors responding to gaseous H2O2 are not covered. All nanomaterials and sensors are characterized with respect to the analytical reaction towards H2O2, limit of detection (LOD, analytical range, electrolyte, pH and response time/incubation time. Applications to real samples are given. Finally, we assess the suitability of the nanomaterials to be used in membrane-based sensors and discuss future trends and perspectives of these sensors in biomedical research.

  15. Thermally stimulated luminescence and photoluminescence ...

    Indian Academy of Sciences (India)

    In phosphor prepared in reducing (Ar + 8% H2) atmosphere, a broad emission band due to Eu2+ ranging from 350 to 400 nm was observed with 340 nm excitation. EPR studies have confirmed the presence of Eu2+ ions in the samples prepared in reducing atmosphere. TSL glow curve of SrBPO5:Eu3+ had shown intense ...

  16. Light and pH tunable luminescence in a photochromic bisdiarylethene.

    Science.gov (United States)

    Ortica, Fausto; Cipolloni, Marco; Heynderickx, Arnault; Siri, Olivier; Favaro, Gianna

    2012-05-01

    In this work the luminescence of a bisdiarylethene, containing a benzobis(imidazole) core substituted with two aniline moieties, has been investigated. In previous research, it was found that both acidification and irradiation reversibly triggered colour changes of this compound, thus generating a multi-responsive acidichromic and photochromic system. Intense fluorescence emission, which was detected in several organic solvents, can be an additional light driven signal. In a dioxane/water (1 : 1, v/v) mixture, intensity and spectral position of luminescence have been found to drastically depend on the pH/H0 values of the solutions (pH 5/H0-2 range) due to subsequent protonations (four steps) as the acidity of the solution changes. Alternated irradiations with UV and visible light lead to a decrease and increase, respectively, of the fluorescence intensity, due to the photochromic reaction producing a non-fluorescent compound. Quantum yields and lifetimes of fluorescence were determined as a function of the acidity. The results indicate that protonation shifts the emission to the red and decreases its intensity. The possibility of tuning the colour and intensity of luminescence by both acidification and irradiation generates a multi-switchable "fluorochromic" material.

  17. Advances in lanthanide-based luminescent peptide probes for monitoring the activity of kinase and phosphatase.

    Science.gov (United States)

    Pazos, Elena; Vázquez, M Eugenio

    2014-02-01

    Signaling pathways based on protein phosphorylation and dephosphorylation play critical roles in the orchestration of complex biochemical events and form the core of most signaling pathways in cells (i.e. cell cycle regulation, cell motility, apoptosis, etc.). The understanding of these complex signaling networks is based largely on the biochemical study of their components, i.e. kinases and phosphatases. The development of luminescent sensors for monitoring kinase and phosphatase activity is therefore an active field of research. Examples in the literature usually rely on the modulation of the fluorescence emission of organic fluorophores. However, given the exceptional photophysical properties of lanthanide ions, there is an increased interest in their application as emissive species for monitoring kinase and phosphatase activity. This review summarizes the advances in the development of lanthanide-based luminescent peptide sensors as tools for the study of kinases and phosphatases and provides a critical description of current examples and synthetic approaches to understand these lanthanide-based luminescent peptide sensors. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Luminescence of defects in the structural transformation of layered tin dichalcogenides

    Science.gov (United States)

    Sutter, P.; Komsa, H.-P.; Krasheninnikov, A. V.; Huang, Y.; Sutter, E.

    2017-12-01

    Layered tin sulfide semiconductors are both of fundamental interest and attractive for energy conversion applications. Sn sulfides crystallize in several stable bulk phases with different Sn:S ratios (SnS2, Sn2S3, and SnS), which can transform into phases with a lower sulfur concentration by introduction of sulfur vacancies (VS). How this complex behavior affects the optoelectronic properties remains largely unknown but is of key importance for understanding light-matter interactions in this family of layered materials. Here, we use the capability to induce VS and drive a transformation between few-layer SnS2 and SnS by electron beam irradiation, combined with in-situ cathodoluminescence spectroscopy and ab-initio calculations to probe the role of defects in the luminescence of these materials. In addition to the characteristic band-edge emission of the endpoint structures, our results show emerging luminescence features accompanying the SnS2 to SnS transformation. Comparison with calculations indicates that the most prominent emission in SnS2 with sulfur vacancies is not due to luminescence from a defect level but involves recombination of excitons bound to neutral VS in SnS2. These findings provide insight into the intrinsic and defect-related optoelectronic properties of Sn chalcogenide semiconductors.

  19. Luminescence variations in europium-doped silicon-substituted hydroxyapatite nanobiophosphor via three different methods

    Energy Technology Data Exchange (ETDEWEB)

    Thang, Cao Xuan; Pham, Vuong-Hung, E-mail: vuong.phamhung@hust.edu.vn

    2015-07-15

    Highlights: • Europium doped silicon-substituted hydroxyapatite was synthesized by wet chemical synthesis method. • Morphology of nanoparticles depended on the synthesized method. • Photoluminescence intensity of the sample increases with the increasing of Si substitutions, Eu dopants and thermal annealing. - Abstract: This paper reports the first attempt for the synthesis of europium-doped Si-substituted hydroxyapatite (HA) nanostructure to achieve strong and stable luminescence of nanobiophosphor, particularly, by addition of different Eu dopants, Si substitutions, and application of optimum annealing temperatures of up to 1000 °C. The nanobiophosphor was synthesized by the coprecipitation, microwave, and hydrothermal methods. The nanoparticles demonstrated a nanowire to a spindle-like morphology, which was dependent on the method of synthesis. The photoluminescence (PL) intensity of the sample increases with the increase in Si substitutions and Eu dopants. The luminescent nanoparticles also showed the typical luminescence of Eu{sup 3+} centered at 610 nm, which was more efficient for the annealed Eu-doped Si-HA nanoparticles than for the as-synthesized nanoparticles. Among the different synthesis methods, the hydrothermal method reveals the best light emission represented by high PL intensity and narrow PL spectra. These results suggest the potential application of Eu-doped Si-HA in stable and biocompatible nanophosphors for light emission and nanomedicine.

  20. Luminescent properties of fluorophosphate glasses with lead chalcogenides molecular clusters

    International Nuclear Information System (INIS)

    Kolobkova, E.V.; Kukushkin, D.S.; Nikonorov, N.V.; Shakhverdov, T.A.; Sidorov, A.I.; Vasiliev, V.N.

    2015-01-01

    Fluorophosphate glasses containing lead, selenium, and sulfur exhibit an intense luminescence in the 400–620 nm spectral region when excited by the 240–420 nm radiation. This luminescence is due to the presence of (PbSe) n and/or (PbS) n molecular clusters in the glasses, which appear in the as-prepared glasses before quantum dots formation. The thermal treatment at temperatures less than the glass transition temperature results in the red-shift of the luminescence bands and in an increase in the luminescence intensity. Heating the thermally treated glass samples leads to the reversible thermal quenching of the luminescence. - Highlights: • Fluorophosphate glasses with Pb, Se, and S ions contain (PbSe) n or (PbS) n molecular clusters. • (PbSe) n and (PbS) n molecular clusters possess luminescence in the visible with UV excitation. • Heating the glass leads to the reversible thermal quenching of the luminescence

  1. Occurrence of gigantic biogenic magnetite during the Paleocene-Eocene Thermal Maximum

    Science.gov (United States)

    Schumann, D.; Raub, T. D.; Kopp, R. E.; Guerquin-Kern, J. L.; Wu, T. D.; Rouiller, I.; Smirnov, A. V.; Sears, S. K.; Lücken, U.; Tikoo, S. M.; Hesse, R.; Kirschvink, J. L.; Vali, H.

    2009-04-01

    et al. 2008] to other PETM locations of the Atlantic margin and to a possible modern analog environment. High surface productivity with low-organic carbon density sediments and meter-scale sedimentary suboxic zones are provided by tropical shelves fed by energetic river systems, such as the Amazon. We inverstigated several magnetic extracts of samples taken from the meter-scale suboxic zones of the Amazone delta system. Sluijs A, Brinkhuis H, Schouten S, Bohaty SM, John CM, Zachos JC, Reichart GJ, Damste JSS, Crouch EM, Dickens GR. 2007. Environmental precursors to rapid light carbon injection at the Palaeocene/Eocene boundary. Nature 450:1218-1221. Kopp RE, Raub TD, Schumann D, Vali H, Smirnov AV, Kirschvink JL 2007. Magnetofossil spike during the Paleocene-Eocene thermal maximum: Ferromagnetic resonance, rock magnetic, and electron microscopy evidence from Ancora, New Jersey, United States. Paleoceanography, doi:10.1029/2007pa001473. Lipper PC, Zachos JC 2007. A biogenic origin for anomalous fine-grained magnetic material at the Paleocone-Eocene booundary at Wilson Lake, New Jesery. Paleoceanography, doi:10.1029/2007pa001471. Schumann D, Raub TD, Kopp RE, Guerquin-Kern JL, Wu TD, Rouiller I, Smirnov AV, Sears K, Lücken U, Tikoo SM, Hesse R, Kirschvink JL, Vali H 2008. Gigantism in unique biogenic magnetite at the Paleocene-Eocene Thermal Maximum. PNAS, 105:17648-17653.

  2. Intense upconversion luminescence in ytterbium-sensitized thulium-doped oxychloride germanate glass

    International Nuclear Information System (INIS)

    Sun Hongtao; Zhanga Liyan; Zhang Junjie; Wen Lei; Yu Chunlei; Duan Zhongchao; Dai Shixun; Hu Lili; Jiang Zhonghong

    2005-01-01

    Structural and upconversion fluorescence properties in ytterbium-sensitized thulium-doped oxychloride germanate glass have been studied. The structure of oxychloride germanate glass was investigated by peak-deconvolution of Raman spectrum, and the structural information was obtained from the peak wavenumbers. The Raman spectrum investigation indicates that PbCl 2 plays an important role in the formation of glass network, and has an important influence on the upconversion luminescence. Intense blue and weak red emissions centered at 477 and 650 nm, corresponding to the transitions 1 G 4 → 3 H 6 and 1 G 4 → 3 H 4 , respectively, were observed at room temperature. The possible upconversion mechanisms are discussed and estimated. Intense upconversion luminescence indicates that oxychloride germanate glass can be used as potential host material for upconversion lasers

  3. Luminescent metal-organic frameworks for chemical sensing and explosive detection.

    Science.gov (United States)

    Hu, Zhichao; Deibert, Benjamin J; Li, Jing

    2014-08-21

    Metal-organic frameworks (MOFs) are a unique class of crystalline solids comprised of metal cations (or metal clusters) and organic ligands that have shown promise for a wide variety of applications. Over the past 15 years, research and development of these materials have become one of the most intensely and extensively pursued areas. A very interesting and well-investigated topic is their optical emission properties and related applications. Several reviews have provided a comprehensive overview covering many aspects of the subject up to 2011. This review intends to provide an update of work published since then and focuses on the photoluminescence (PL) properties of MOFs and their possible utility in chemical and biological sensing and detection. The spectrum of this review includes the origin of luminescence in MOFs, the advantages of luminescent MOF (LMOF) based sensors, general strategies in designing sensory materials, and examples of various applications in sensing and detection.

  4. Water dispersible, non-cytotoxic, cross-linked luminescent AIE dots: Facile preparation and bioimaging applications

    Science.gov (United States)

    Liu, Meiying; Zhang, Xiqi; Yang, Bin; Deng, Fengjie; Li, Zhen; Wei, Junchao; Zhang, Xiaoyong; Wei, Yen

    2014-12-01

    Fluorescent organic nanoparticles have attracted great current research interest due to their superior properties as compared with small organic dyes and fluorescent inorganic nanoparticles. However, fluorescent organic nanoparticles based on conventional organic dyes often result in significant fluorescence decrease due to the notorious aggregation-caused quenching effect. On the other hand, these fluorescent organic nanoparticles obtained from self-assembly are normally not stable in diluted solution. Therefore, the development of novel fluorescent organic nanoparticles which could overcome these limitations is highly desirable for their practical biomedical applications. In this work, water dispersible, non-cytotoxic and cross-linked luminescent polymeric nanoparticles based on aggregation induced emission dyes were prepared via one pot emulsion polymerization. These cross-linked luminescent polymeric nanoparticles emitted strong red fluorescence and were highly stable in diluted aqueous solution, making them highly potential for various biomedical applications.

  5. Modeling of the shape of infrared stimulated luminescence signals in feldspars

    DEFF Research Database (Denmark)

    Pagonis, Vasilis; Jain, Mayank; Murray, Andrew S.

    2012-01-01

    This paper presents a new empirical model describing infrared (IR) stimulation phenomena in feldspars. In the model electrons from the ground state of an electron trap are raised by infrared optical stimulation to the excited state, and subsequently recombine with a nearest-neighbor hole via...... a tunneling process, leading to the emission of light. The model explains the experimentally observed existence of two distinct time intervals in the luminescence intensity; a rapid initial decay of the signal followed by a much slower gradual decay of the signal with time.The initial fast decay region...... corresponds to a fast rate of recombination processes taking place along the infrared stimulated luminescence (IRSL) curves. The subsequent decay of the simulated IRSL signal is characterized by a much slower recombination rate, which can be described by a power-law type of equation.Several simulations...

  6. Simultaneous ion luminescence imaging and spectroscopy of individual aerosol particles with external proton or helium microbeams

    Energy Technology Data Exchange (ETDEWEB)

    Kada, Wataru, E-mail: kada.wataru@gunma-u.ac.jp [Gunma University, 1-5-1 Tenjin-cho, Kiryu, Gunma 376-8515 (Japan); Satoh, Takahiro; Yokoyama, Akihito; Koka, Masashi; Kamiya, Tomihiro [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan)

    2014-08-01

    Simultaneous microscopic imaging and spectroscopy of individual aerosol particles were performed with an external microbeam. Visible luminescence induced by the external microbeam was successfully used as a probe to detect organic contaminants in the targets. Combined ion luminescence (IL)/particle-induced X-ray emission (PIXE) analysis of the aerosol targets revealed microscopic chemical and elemental composition distributions under ambient atmospheric conditions. The simple confocal micro-optics for the IL spectroscopy and microscopic imaging were sufficiently sensitive for detecting these molecules at sub-parts per million concentrations and at a wavelength resolution of less than 5 nm. The IL spectra were monitored to prevent severe damage to the samples. Furthermore, our IL system has the advantage that it is simple to add to a conventional micro-PIXE system.

  7. Amplification of Circularly Polarized Luminescence through Triplet-Triplet Annihilation-Based Photon Upconversion.

    Science.gov (United States)

    Han, Jianlei; Duan, Pengfei; Li, Xianggao; Liu, Minghua

    2017-07-26

    Amplification of circularly polarized luminescence (CPL) is demonstrated in a triplet-triplet annihilation-based photon upconversion (TTA-UC) system. When chiral binaphthyldiamine acceptors are sensitized with an achiral Pt(II) octaethylporphine (PtOEP) in solution, upconverted circularly polarized luminescence (UC-CPL) were observed for the first time, in which the positive or negative circularly polarized emission could be obtained respectively, following the molecular chirality of the acceptors (R/S). More interestingly, one order of magnitude amplification of the dissymmetry factor g lum in UC-CPL was obtained in comparison with the normal promoted CPL. The multistep photophysical process of TTA-UC including triplet-triplet energy transfer (TTET) and triplet-triplet annihilation (TTA) have been suggested to enhance the UC-CPL, which provided a new strategy to design CPL materials with a higher dissymmetry factor.

  8. The mensuration of delayed luminescence on ginseng

    Science.gov (United States)

    Xiang, Fenghua; Bai, Hua; Tang, Guoqing

    2008-12-01

    In this paper, the delayed luminescence of ginseng produced from two different areas was determined with the self built bioluminescence detecting system. And the attenuation curve of bioluminescence of the experimental samples were studied, before and after the samples extracted by 58% alcohol. We primarily gave out the parameters describing emitting characteristic. Using the method of optic induced bioluminescence, we also determined the weak luminescence emitting from the ginseng tuber, and find the intensity and decay time having obvious difference from skin and core, with these data we can distinguish the producing area and feature of the ginseng. In the experiment, the light-induce luminescence of the sample was menstruated, which has been infused by water and 58% alcohol; the difference between two kinds of samples which were infused and not infused has been delivered. In order to investigate the effect of excitation-light spectrum component to delayed luminescence of ginseng, a light filter witch allow a wavelength scope of 225nm~420nm pass through was installed between the light source and sample, keeping other work condition unchanged, the bioluminescence was also determined. For investigating the effect of extracting to emitting, the absorption spectrum of above samples ware studied, and the time-sequence of absorption spectrum was obtained. Based on the data obtained from our experiment, we analyzed the radiation mechanism of ginseng slice and tuber.

  9. Combustion synthesis and preliminary luminescence studies of ...

    Indian Academy of Sciences (India)

    The polycrystalline sample of LiBaPO4 : Tb3+ (LBPT) was successfully synthesized by solution combustion synthesis and studied for its luminescence characteristics. The thermoluminescence (TL) glow curve of LBPT material consists of two peaks at 204.54 and 251.21°C. The optimum concentration was 0.005 mol to ...

  10. Synthesis, spectroscopic, electrochemical and luminescence studies ...

    Indian Academy of Sciences (India)

    hydrazino-5-mercapto-1,2,4-triazole (LH2) as co-ligand were synthesised and characterized by elemental analysis, IR, UV/Vis, 1H NMR spectra and FAB-mass data. The electrochemical and luminescent properties of the complexes were also ...

  11. Optically stimulated luminescence dating of rock surfaces

    DEFF Research Database (Denmark)

    Sohbati, Reza

    There are many examples of rock surfaces, rock art and stone structures whose ages are of great importance to the understanding of various phenomena in geology, climatology and archaeology. Optically stimulated luminescence (OSL) dating is a well-established chronological tool that has successful...

  12. Hydrothermal synthesis, crystal structure and luminescence property ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 127; Issue 12. Hydrothermal synthesis, crystal structure and luminescence property of a three dimensional Sm(III) coordination polymer with 2,5-pyridinedicarboxylic acid. Kranthi Kumar Gangu Anima S Dadhich Saratchandra Babu Mukkamala. Volume 127 Issue 12 ...

  13. Understanding the influence of nanoenvironment on luminescence ...

    Indian Academy of Sciences (India)

    Understanding the influence of nanoenvironment on luminescence of rare-earth ions. PUSHPAL GHOSH and AMITAVA PATRA∗. Sol-Gel Division, Central Glass & Ceramic Research Institute, Jadavpur, Kolkata 700 032,. India. *Corresponding author. E-mail: apatra@cgcri.res.in. Abstract. This paper presents an overview ...

  14. Multistate Luminescent Solar Concentrator "Smart" Windows

    NARCIS (Netherlands)

    Sol, Jeroen A.H.P.; Timmermans, Gilles H.; Breugel, van Abraham J.; Schenning, Albertus P.H.J.; Debije, Michael G.

    2018-01-01

    A supertwist liquid crystalline luminescent solar concentrator (LSC) "smart" window is fabricated which can be switched electrically between three states: one designed for increased light absorption and electrical generation (the "dark" state), one for transparency (the "light" state), and one for

  15. Optically stimulated luminescence dating of young sediments

    DEFF Research Database (Denmark)

    Madsen, Anni Tindahl; Murray, Andrew S.

    2009-01-01

    Optically stimulated luminescence (OSL) dating of young (... of OSL dating, outlines the problems specific to the dating of young material, and then uses recent applications to young sediments to illustrate the greatly increased scope and potential of the method in geomorphology and the geology of recent deposits. The overall reliability of this new generation...

  16. Synthesis, crystal structure, theoretical study and luminescence ...

    Indian Academy of Sciences (India)

    performed on complex 1 to rationalize its experimental absorption spectra. Complex 1 exhibits luminescence in EtOH ... potential applications in biological systems like, devel- opment of structural and functional models for ... to react with [WOnS4−n] (n = 0-2).11,12 These reactions result in the formation of a large number of ...

  17. Combustion synthesis and preliminary luminescence studies of ...

    Indian Academy of Sciences (India)

    bustion synthesis and studied for its luminescence characteristics. The thermoluminescence (TL) glow curve of. LBPT material consists of two peaks at 204.54 and 251.21◦C. The optimum concentration was 0.005 mol to obtain the higher TL intensity compared to commercial TLD-100 phosphor. The peak shape method was ...

  18. Combustion synthesis and preliminary luminescence studies of ...

    Indian Academy of Sciences (India)

    6, October 2015, pp. 1527–1531. c Indian Academy of Sciences. Combustion synthesis and preliminary luminescence studies of. LiBaPO4 : Tb. 3+ phosphor. C B PALAN1,∗, N S BAJAJ1, ... MS received 28 April 2015; accepted 8 June 2015. Abstract. ... In CW-OSL mode its sensitivity for beta expo- sure was found to be ...

  19. Aspects of pre-dose and other luminescence phenomena in quartz absorbed dose estimation

    International Nuclear Information System (INIS)

    Adamiec, G.

    2000-01-01

    The understanding of all luminescence processes occurring in quartz is of paramount importance in the further development of robust absorbed dose estimation techniques (for the purpose of dating and retrospective dosimetry). The findings presented in this thesis, aid future improvements of absorbed dose estimation techniques using quartz by presenting investigations in the following areas: 1) interpretation of measurement results, 2) numerical modelling of luminescence in quartz, 3) phenomena needing inclusion in future physical models of luminescence. In the first part, the variability of properties of single quartz grains is examined. Through empirical and theoretical considerations, investigations are made of various problems of measurements of luminescence using multi-grain aliquots, and specifically areas where the heterogeneity of the sample at the inter-grain level may be misinterpreted at the multi-grain-aliquot level. The results obtained suggest that the heterogeneity of samples is often overlooked, and that such differences can have a profound influence on the interpretation of measurement results. Discussed are the shape of TL glow curves, OSL decay curves, dose response curves (including consequences for using certain signals as proxies for others), normalisation procedures and D E estimation techniques. Further, a numerical model of luminescence is proposed, which includes multiple R-centres and is used to describe the pre-dose sensitisation in quartz. The numerical model exhibits a broad-scale behaviour observed experimentally in a sample of annealed quartz. The shapes of TAC for lower (20 Gy) and higher doses (1 kGy) and the evolution with temperature of the isothermal sensitisation curves are qualitatively matched for the empirical and numerical systems. In the third area, a preliminary investigation of the properties of the '110 deg. C peak' in the 550 nm emission band, in annealed quartz is presented. These properties are in sharp contrast with

  20. Luminescent Properties of Surface Functionalized BaTiO3 Embedded in Poly(methyl methacrylate

    Directory of Open Access Journals (Sweden)

    Sebastian Requena

    2014-01-01

    Full Text Available As-received BaTiO3 nanopowders of average grain sizes 50 nm and 100 nm were functionalized by (3-aminopropyltriethoxysilane (APTES and mixed with poly(methyl methacrylate/toluene solution. The nanocomposite solution was spin coated on Si substrates to form thin films. The photoluminescence spectrum of the pure powder was composed of a bandgap emission at 3.0 eV and multiple bands centered about 2.5 eV. Surface functionalization of the BaTiO3 powder via APTES increases overall luminescence at room temperature while only enhancing bandgap emission at low-temperature. Polymer coating of the functionalized nanoparticles significantly enhances bandgap emissions while decreasing emissions associated with near-surface lattice distortions at 2.5 eV.