WorldWideScience

Sample records for geometry ii self-bias

  1. Generalized geometry lectures on type II backgrounds

    CERN Document Server

    Tsimpis, Dimitrios

    2016-01-01

    The first part of these notes is a self-contained introduction to generalized complex geometry. It is intended as a `user manual' for tools used in the study of supersymmetric backgrounds of supergravity. In the second part we review some past and recent results on the generalized complex structure of supersymmetric type II vacua in various dimensions.

  2. Axiomatic differential geometry II-2 - differential forms

    OpenAIRE

    Nishimura, Hirokazu

    2013-01-01

    We refurbish our axiomatics of differential geometry introduced in [Mathematics for Applications,, 1 (2012), 171-182]. Then the notion of Euclideaness can naturally be formulated. The principal objective in this paper is to present an adaptation of our theory of differential forms developed in [International Journal of Pure and Applied Mathematics, 64 (2010), 85-102] to our present axiomatic framework.

  3. Line geometry and electromagnetism II: wave motion

    CERN Document Server

    Delphenich, D H

    2013-01-01

    The fundamental role of line geometry in the study of wave motion is first introduced in the general context by way of the tangent planes to the instantaneous wave surfaces, in which it is first observed that the possible frequency-wave number 1-forms are typically constrained by a dispersion law that is derived from a constitutive law by way of the field equations. After a general review of the basic concepts that relate to quadratic line complexes, these geometric notions are applied to the study of electromagnetic waves, in particular.

  4. A Self-Biasing Pulsed Depressed Collector

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, Mark A.; Jensen, Aaron; Neilson, Jeff; /SLAC

    2014-05-29

    Depressed collectors have been utilized successfully for many years to improve the electrical efficiency of vacuum electron devices. Increasingly, pulsed, high-peak power accelerator applications are placing a premium on electrical efficiency. As RF systems are responsible for a large percentage of the overall energy usage at accelerator laboratories, methods to improve upon the state-of-the-art in pulsed high-power sources are desired. This paper presents a technique for self-biasing the stages in a multistage depressed collector. With this technique, the energy lost during the rise and fall times of the pulse can be recovered, separate power supplies are not needed, and existing modulators can be retrofitted. Calculations show that significant cost savings can be realized with the implementation of this device in high-power systems. In this paper, the technique is described along with experimental demonstration. (auth)

  5. Self-biased circulators for high power applications

    Science.gov (United States)

    Sokolov, Alexander S.

    Self-biased circulators exploit the properties of high anisotropy magnetic field in hexagonal ferrites, thus allowing operation without biasing magnets and a significant size and weight reduction. Although first self-biased circulators were demonstrated more than 20 years ago, all the prototypes constructed so far are unsuitable for practical applications. An attempt to design a self-biased circulator from scratch was made. Novel exceptionally low dielectric loss and high heat conductivity ceramic materials were developed and innovative substrate synthesis techniques were employed. Low temperature cofiring of green body ferrite compacts and dielectric ceramic slurries were mastered, resulting in solid composite substrates. Original device design was developed. Key features (including wide coupling angles, wide microstriplines, thick substrate, and absence of impedance transformers) enable low insertion loss, broadband operation, high power handling, and compact size. Fabrication and testing of Ka band Y-junction self-biased circulator are reported herein. Furthermore, design approach and fabrication techniques developed here can be readily applied for the construction of X-band self-biased circulators, provided that suitable ferrite materials are available. Low temperature cofiring of ferrite and dielectric materials is especially beneficial for various RF and high-frequency applications. Multiple devices can be readily fabricated on a single wafer using conventional lithographic techniques, resulting in true microwave monolithic integrated circuit.

  6. Coordinate-free Classic Geometries II. Conformal Structure

    CERN Document Server

    Anan'in, Sasha; Grossi, Carlos H

    2009-01-01

    We study grassmannian classic geometries in the spirit of the previous paper. The interrelation between a (pseudo-)riemannian projective classic geometry and the conformal structure on its absolute is explained.

  7. Stabilization of electron beam spot size by self bias potential

    Energy Technology Data Exchange (ETDEWEB)

    Kwan, T.J.T.; Moir, D.C.; Snell, C.M.; Kang, M.

    1998-12-31

    In high resolution flash x-ray imaging technology the electric field developed between the electron beam and the converter target is large enough to draw ions from the target surface. The ions provide fractional neutralization and cause the electron beam to focus radially inward, and the focal point subsequently moves upstream due to the expansion of the ion column. A self-bias target concept is proposed and verified via computer simulation that the electron charge deposited on the target can generate an electric potential, which can effectively limit the ion motion and thereby stabilize the growth of the spot size. A target chamber using the self bias target concept was designed and tested in the Integrated Test Stand (ITS). The authors have obtained good agreement between computer simulation and experiment.

  8. Mathematical aspects of molecular replacement. II. Geometry of motion spaces.

    Science.gov (United States)

    Chirikjian, Gregory S; Yan, Yan

    2012-03-01

    Molecular replacement (MR) is a well established computational method for phasing in macromolecular crystallography. In MR searches, spaces of motions are explored for determining the appropriate placement of rigid models of macromolecules in crystallographic asymmetric units. In the first paper of this series, it was shown that this space of motions, when endowed with an appropriate composition operator, forms an algebraic structure called a quasigroup. In this second paper, the geometric properties of these MR search spaces are explored and analyzed. This analysis includes the local differential geometry, global geometry and symmetry properties of these spaces.

  9. T-Duality in Type II String Theory via Noncommutative Geometry and Beyond

    Science.gov (United States)

    Mathai, V.

    This brief survey on how nocommutative and nonassociative geometry appears naturally in the study of T-duality in type II string theory, is essentially a transcript of my talks given at the 21st Nishinomiya-Yukawa Memorial Symposium on Theoretical Physics: Noncommutative Geometry and Quantum Spacetime in Physics, Japan, 11--15 November 2006.

  10. Geometry

    CERN Document Server

    Pedoe, Dan

    1988-01-01

    ""A lucid and masterly survey."" - Mathematics Gazette Professor Pedoe is widely known as a fine teacher and a fine geometer. His abilities in both areas are clearly evident in this self-contained, well-written, and lucid introduction to the scope and methods of elementary geometry. It covers the geometry usually included in undergraduate courses in mathematics, except for the theory of convex sets. Based on a course given by the author for several years at the University of Minnesota, the main purpose of the book is to increase geometrical, and therefore mathematical, understanding and to he

  11. Coordination chemistry and solution structure of Fe(II)-peplomycin. Two possible coordination geometries.

    Science.gov (United States)

    Li, Yang; Lehmann, Teresa

    2012-06-01

    The solution structure of Fe(II)-peplomycin was determined from NMR data collected for this molecule. As found previously for Fe(II)- and Co(II)-bound bleomycin; the coordination sphere of the metal is composed of the primary and secondary amines in β-aminoalanine, the pyrimidine and imidazole rings in the pyrimidinylpropionamide, and β-hydroxyhistidine moieties, respectively, the amine nitrogen in β-hydroxyhistidine, and either the carbamoyl group in mannose or a solvent molecule. The two most discussed coordination geometries for the aforementioned ligands in metallo-bleomycins have been tested against the NMR data generated for Fe(II)-peplomycin. The interpretation of the experimental evidence obtained through molecular dynamics indicates that both geometries are equally likely in solution for this compound in the absence of DNA, but arguments are offered to explain why one of these geometries is preferred in the presence of DNA.

  12. The basic geometry of Witt vectors, II: Spaces

    CERN Document Server

    Borger, James

    2010-01-01

    This is an account of the algebraic geometry of Witt vectors and related constructions. The theory of the usual, "p-typical" Witt vectors of p-adic schemes of finite type is already reasonably well understood. The main point here is to generalize this theory in two different ways. We allow not just p-typical Witt vectors but also, for example, those taken with respect to any set of primes in any ring of integers in any global field. In particular, this includes the "big" Witt vectors. We also allow not just p-adic schemes of finite type but arbitrary algebraic spaces over the ring of integers in the global field. We give similar generalizations of Buium's formal arithmetic jet spaces, which are dual to the Witt vector construction. We also give concrete geometric descriptions of Witt spaces and arithmetic jet spaces and investigate whether many standard geometric properties are preserved by these functors.

  13. Differential geometry based solvation model II: Lagrangian formulation.

    Science.gov (United States)

    Chen, Zhan; Baker, Nathan A; Wei, G W

    2011-12-01

    Solvation is an elementary process in nature and is of paramount importance to more sophisticated chemical, biological and biomolecular processes. The understanding of solvation is an essential prerequisite for the quantitative description and analysis of biomolecular systems. This work presents a Lagrangian formulation of our differential geometry based solvation models. The Lagrangian representation of biomolecular surfaces has a few utilities/advantages. First, it provides an essential basis for biomolecular visualization, surface electrostatic potential map and visual perception of biomolecules. Additionally, it is consistent with the conventional setting of implicit solvent theories and thus, many existing theoretical algorithms and computational software packages can be directly employed. Finally, the Lagrangian representation does not need to resort to artificially enlarged van der Waals radii as often required by the Eulerian representation in solvation analysis. The main goal of the present work is to analyze the connection, similarity and difference between the Eulerian and Lagrangian formalisms of the solvation model. Such analysis is important to the understanding of the differential geometry based solvation model. The present model extends the scaled particle theory of nonpolar solvation model with a solvent-solute interaction potential. The nonpolar solvation model is completed with a Poisson-Boltzmann (PB) theory based polar solvation model. The differential geometry theory of surfaces is employed to provide a natural description of solvent-solute interfaces. The optimization of the total free energy functional, which encompasses the polar and nonpolar contributions, leads to coupled potential driven geometric flow and PB equations. Due to the development of singularities and nonsmooth manifolds in the Lagrangian representation, the resulting potential-driven geometric flow equation is embedded into the Eulerian representation for the purpose of

  14. Geometry and Framework Interactions of Zeolite-Encapsulated Copper(II)-Histidine Complexes

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Grommen, R.; Manikandan, P.; Gao, Y.; Shane, T.; Shane, J.J.; Schoonheydt, R.A.; Goldfarb, D.

    2000-01-01

    The coordination geometry of zeolite-encapsulated copper(II)-histidine (CuHis) complexes, prepared by ion exchange of the complexes from aqueous solutions into zeolite NaY, was determined by a combination of UV-vis-NIR diffuse reflectance spectroscopy (DRS), X-band EPR, electron-spin-echo envelope m

  15. Geometry and Framework Interactions of Zeolite-Encapsulated Copper(II)-Histidine Complexes

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Grommen, R.; Manikandan, P.; Gao, Y.; Shane, T.; Shane, J.J.; Schoonheydt, R.A.; Goldfarb, D.

    2000-01-01

    The coordination geometry of zeolite-encapsulated copper(II)-histidine (CuHis) complexes, prepared by ion exchange of the complexes from aqueous solutions into zeolite NaY, was determined by a combination of UV-vis-NIR diffuse reflectance spectroscopy (DRS), X-band EPR, electron-spin-echo envelope m

  16. Memristor based startup circuit for self biased circuits

    Science.gov (United States)

    Das, Mangal; Singh, Amit Kumar; Rathi, Amit; Singhal, Sonal

    2016-04-01

    This paper presents the design of a Memristor based startup circuit for self biased circuits. Memristor has many advantages over conventional CMOS devices such as low leakage current at nanometer scale, easy to manufacture. In this work the switching characteristics of memristor is utilized. First the theoretical equations describing the switching behavior of memristor are investigated. To prove the switching capability of Memristor, a startup circuit based on memristor is proposed which uses series combination of Memristor and capacitor. Proposed circuit is compared with the previously reported MOSFET based startup circuits. Comparison of different circuits was done to validate the results. Simulation results show that memristor based circuit can attain on (I = 12.94 µA) to off state (I = 1 .2 µA) in 25 ns while the MOSFET based startup circuits take on (I = 14.19 µA) to off state (I = 1.4 µA) in more than 90 ns. The benefit comes in terms of area because the number of components used in the circuit are lesser than the conventional startup circuits.

  17. Plasma acceleration using a radio frequency self-bias effect

    Science.gov (United States)

    Rafalskyi, D.; Aanesland, A.

    2015-06-01

    In this work plasma acceleration using a RF self-bias effect is experimentally studied. The experiments are conducted using a novel plasma accelerator system, called Neptune, consisting of an inductively coupled plasma source and a RF-biased set of grids. The plasma accelerator can operate in a steady state mode, producing a plasma flow with separately controlled plasma flux and velocity without any magnetic configuration. The operating pressure at the source output is as low as 0.2 mTorr and can further be decreased. The ion and electron flows are investigated by measuring the ion and electron energy distribution functions both space resolved and with different orientations with respect to the flow direction. It is found that the flow of electrons from the source is highly anisotropic and directed along the ion flow and this global flow of accelerated plasma is well localized in the plasma transport chamber. The maximum flux is about 7.5.1015 ions s-1 m-2 (at standard conditions) on the axis and decreasing to almost zero at a radial distances of more than 15 cm from the flow axis. Varying the RF acceleration voltage in the range 20-350 V, the plasma flow velocity can be changed between 10 and 35 km/s. The system is prospective for different technology such as space propulsion and surface modification and also interesting for fundamental studies for space-related plasma simulations and investigation of the dynamo effect using accelerated rotating plasmas.

  18. Plasma acceleration using a radio frequency self-bias effect

    Energy Technology Data Exchange (ETDEWEB)

    Rafalskyi, D.; Aanesland, A. [Laboratoire de Physique des Plasmas (CNRS, Ecole Polytechnique, Sorbonne Universités, UPMC Univ Paris 06, Univ Paris-Sud), Ecole Polytechnique, 91128 Palaiseau (France)

    2015-06-15

    In this work plasma acceleration using a RF self-bias effect is experimentally studied. The experiments are conducted using a novel plasma accelerator system, called Neptune, consisting of an inductively coupled plasma source and a RF-biased set of grids. The plasma accelerator can operate in a steady state mode, producing a plasma flow with separately controlled plasma flux and velocity without any magnetic configuration. The operating pressure at the source output is as low as 0.2 mTorr and can further be decreased. The ion and electron flows are investigated by measuring the ion and electron energy distribution functions both space resolved and with different orientations with respect to the flow direction. It is found that the flow of electrons from the source is highly anisotropic and directed along the ion flow and this global flow of accelerated plasma is well localized in the plasma transport chamber. The maximum flux is about 7.5·10{sup 15} ions s{sup −1} m{sup −2} (at standard conditions) on the axis and decreasing to almost zero at a radial distances of more than 15 cm from the flow axis. Varying the RF acceleration voltage in the range 20–350 V, the plasma flow velocity can be changed between 10 and 35 km/s. The system is prospective for different technology such as space propulsion and surface modification and also interesting for fundamental studies for space-related plasma simulations and investigation of the dynamo effect using accelerated rotating plasmas.

  19. Magnetic Flux Lines in Complex Geometry Type-II Superconductors Studied by the Time Dependent Ginzburg-Landau Equation

    DEFF Research Database (Denmark)

    Alstrøm, Tommy Sonne; Sørensen, Mads Peter; Pedersen, Niels Falsig

    2010-01-01

    The time-dependent Ginzburg-Landau equation is solved numerically for type-II superconductors of complex geometry using the finite element method. The geometry has a marked influence on the magnetic vortex distribution and the vortex dynamics. We have observed generation of giant vortices...

  20. LRS Bianchi Type II Massive String Cosmological Models with Magnetic Field in Lyra's Geometry

    Directory of Open Access Journals (Sweden)

    Raj Bali

    2013-01-01

    Full Text Available Bianchi type II massive string cosmological models with magnetic field and time dependent gauge function ( in the frame work of Lyra's geometry are investigated. The magnetic field is in -plane. To get the deterministic solution, we have assumed that the shear ( is proportional to the expansion (. This leads to , where and are metric potentials and is a constant. We find that the models start with a big bang at initial singularity and expansion decreases due to lapse of time. The anisotropy is maintained throughout but the model isotropizes when . The physical and geometrical aspects of the model in the presence and absence of magnetic field are also discussed.

  1. Type II InAs/GaAsSb quantum dots: Highly tunable exciton geometry and topology

    Energy Technology Data Exchange (ETDEWEB)

    Llorens, J. M.; Wewior, L.; Cardozo de Oliveira, E. R.; Alén, B., E-mail: benito.alen@csic.es [IMM-Instituto de Microelectrónica de Madrid (CNM-CSIC), Isaac Newton 8, PTM, E-28760 Tres Cantos, Madrid (Spain); Ulloa, J. M.; Utrilla, A. D.; Guzmán, A.; Hierro, A. [Institute for Systems based on Optoelectronics and Microtechnology (ISOM), Universidad Politécnica de Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain)

    2015-11-02

    External control over the electron and hole wavefunctions geometry and topology is investigated in a p-i-n diode embedding a dot-in-a-well InAs/GaAsSb quantum structure with type II band alignment. We find highly tunable exciton dipole moments and largely decoupled exciton recombination and ionization dynamics. We also predicted a bias regime where the hole wavefunction topology changes continuously from quantum dot-like to quantum ring-like as a function of the external bias. All these properties have great potential in advanced electro-optical applications and in the investigation of fundamental spin-orbit phenomena.

  2. XAFS study of copper(II) complexes with square planar and square pyramidal coordination geometries

    Science.gov (United States)

    Gaur, A.; Klysubun, W.; Nitin Nair, N.; Shrivastava, B. D.; Prasad, J.; Srivastava, K.

    2016-08-01

    X-ray absorption fine structure of six Cu(II) complexes, Cu2(Clna)4 2H2O (1), Cu2(ac)4 2H2O (2), Cu2(phac)4 (pyz) (3), Cu2(bpy)2(na)2 H2O (ClO4) (4), Cu2(teen)4(OH)2(ClO4)2 (5) and Cu2(tmen)4(OH)2(ClO4)2 (6) (where ac, phac, pyz, bpy, na, teen, tmen = acetate, phenyl acetate, pyrazole, bipyridine, nicotinic acid, tetraethyethylenediamine, tetramethylethylenediamine, respectively), which were supposed to have square pyramidal and square planar coordination geometries have been investigated. The differences observed in the X-ray absorption near edge structure (XANES) features of the standard compounds having four, five and six coordination geometry points towards presence of square planar and square pyramidal geometry around Cu centre in the studied complexes. The presence of intense pre-edge feature in the spectra of four complexes, 1-4, indicates square pyramidal coordination. Another important XANES feature, present in complexes 5 and 6, is prominent shoulder in the rising part of edge whose intensity decreases in the presence of axial ligands and thus indicates four coordination in these complexes. Ab initio calculations were carried out for square planar and square pyramidal Cu centres to observe the variation of 4p density of states in the presence and absence of axial ligands. To determine the number and distance of scattering atoms around Cu centre in the complexes, EXAFS analysis has been done using the paths obtained from Cu(II) oxide model and an axial Cu-O path from model of a square pyramidal complex. The results obtained from EXAFS analysis have been reported which confirmed the inference drawn from XANES features. Thus, it has been shown that these paths from model of a standard compound can be used to determine the structural parameters for complexes having unknown structure.

  3. Shielding NSLS-II light source: Importance of geometry for calculating radiation levels from beam losses

    Science.gov (United States)

    Kramer, S. L.; Ghosh, V. J.; Breitfeller, M.; Wahl, W.

    2016-11-01

    Third generation high brightness light sources are designed to have low emittance and high current beams, which contribute to higher beam loss rates that will be compensated by Top-Off injection. Shielding for these higher loss rates will be critical to protect the projected higher occupancy factors for the users. Top-Off injection requires a full energy injector, which will demand greater consideration of the potential abnormal beam miss-steering and localized losses that could occur. The high energy electron injection beam produces significantly higher neutron component dose to the experimental floor than a lower energy beam injection and ramped operations. Minimizing this dose will require adequate knowledge of where the miss-steered beam can occur and sufficient EM shielding close to the loss point, in order to attenuate the energy of the particles in the EM shower below the neutron production threshold (Designing supplemental shielding near the loss point using the analytic shielding model is shown to be inadequate because of its lack of geometry specification for the EM shower process. To predict the dose rates outside the tunnel requires detailed description of the geometry and materials that the beam losses will encounter inside the tunnel. Modern radiation shielding Monte-Carlo codes, like FLUKA, can handle this geometric description of the radiation transport process in sufficient detail, allowing accurate predictions of the dose rates expected and the ability to show weaknesses in the design before a high radiation incident occurs. The effort required to adequately define the accelerator geometry for these codes has been greatly reduced with the implementation of the graphical interface of FLAIR to FLUKA. This made the effective shielding process for NSLS-II quite accurate and reliable. The principles used to provide supplemental shielding to the NSLS-II accelerators and the lessons learned from this process are presented.

  4. Identification of different coordination geometries by XAFS in copper(II) complexes with trimesic acid

    Science.gov (United States)

    Gaur, A.; Klysubun, W.; Soni, Balram; Shrivastava, B. D.; Prasad, J.; Srivastava, K.

    2016-10-01

    X-ray absorption spectroscopy (XAS) is very useful in revealing the information about geometric and electronic structure of a transition-metal absorber and thus commonly used for determination of metal-ligand coordination. But XAFS analysis becomes difficult if differently coordinated metal centers are present in a system. In the present investigation, existence of distinct coordination geometries around metal centres have been studied by XAFS in a series of trimesic acid Cu(II) complexes. The complexes studied are: Cu3(tma)2(im)6 8H2O (1), Cu3(tma)2(mim)6 17H2O (2), Cu3(tma)2(tmen)3 8.5H2O (3), Cu3(tma) (pmd)3 6H2O (ClO4)3 (4) and Cu3(tma)2 3H2O (5). These complexes have not only Cu metal centres with different coordination but in complexes 1-3, there are multiple coordination geometries present around Cu centres. Using XANES spectra, different coordination geometries present in these complexes have been identified. The variation observed in the pre-edge features and edge features have been correlated with the distortion of the specific coordination environment around Cu centres in the complexes. XANES spectra have been calculated for the distinct metal centres present in the complexes by employing ab-initio calculations. These individual spectra have been used to resolve the spectral contribution of the Cu centres to the particular XANES features exhibited by the experimental spectra of the multinuclear complexes. Also, the variation in the 4p density of states have been calculated for the different Cu centres and then correlated with the features originated from corresponding coordination of Cu. Thus, these spectral features have been successfully utilized to detect the presence of the discrete metal centres in a system. The inferences about the coordination geometry have been supported by EXAFS analysis which has been used to determine the structural parameters for these complexes.

  5. Giant self-biased magnetoelectric coupling in co-fired textured layered composites

    Science.gov (United States)

    Yan, Yongke; Zhou, Yuan; Priya, Shashank

    2013-02-01

    Co-fired magnetostrictive/piezoelectric/magnetostrictive laminate structure with silver inner electrode was synthesized and characterized. We demonstrate integration of textured piezoelectric microstructure with the cost-effective low-temperature co-fired layered structure to achieve strong magnetoelectric coupling. Using the co-fired composite, a strategy was developed based upon the hysteretic response of nickel-copper-zinc ferrite magnetostrictive materials to achieve peak magnetoelectric response at zero DC bias, referred as self-biased magnetoelectric response. Fundamental understanding of self-bias phenomenon in composites with single phase magnetic material was investigated by quantifying the magnetization and piezomagnetic changes with applied DC field. We delineate the contribution arising from the interfacial strain and inherent magnetic hysteretic behavior of copper modified nickel-zinc ferrite towards self-bias response.

  6. Giant magnetoelectric effect in self-biased laminates under zero magnetic field

    Science.gov (United States)

    Li, Menghui; Wang, Zhiguang; Wang, Yaojin; Li, Jiefang; Viehland, D.

    2013-02-01

    A giant magnetoelectric (ME) effect in self-biased annealed Metglas/Pb(Zr,Ti)O3/Metglas laminates under zero magnetic bias is reported. The remanent magnetization was increased by annealing Metglas, which generated an internal bias field. This shifted the M-H hysteresis loops, yielding large values for the ME voltage coefficient of αME = 12 V/cm.Oe and 380 V/cm.Oe at 1 kHz and electromechanical resonance under zero magnetic bias, respectively. This self-biased laminate is shown to have a high sensitivity to ac magnetic fields.

  7. Self-bias Dependence on Process Parameters in Asymmetric Cylindrical Coaxial Capacitively Coupled Plasma

    CERN Document Server

    Upadhyay, J; Popović, S; Valente-Feliciano, A -M; Phillips, L; Vušković, L

    2015-01-01

    An rf coaxial capacitively coupled Ar/Cl2 plasma is applied to processing the inner wall of superconducting radio frequency cavities. A dc self-bias potential is established across the inner electrode sheath due to the surface area difference between inner and outer electrodes of the coaxial plasma. The self-bias potential measurement is used as an indication of the plasma sheath voltage asymmetry. The understanding of the asymmetry in sheath voltage distribution in coaxial plasma is important for the modification of the inner surfaces of three dimensional objects. The plasma sheath voltages were tailored to process the outer wall by providing an additional dc current to the inner electrode with the help of an external dc power supply. The dc self-bias potential is measured for different diameter electrodes and its variation on process parameters such as gas pressure, rf power and percentage of chlorine in the Ar/Cl2 gas mixture is studied. The dc current needed to overcome the self-bias potential to make it ...

  8. Radiation Tolerance of CMOS Monolithic Active Pixel Sensors with Self-Biased Pixels

    CERN Document Server

    Deveaux, M; Besson, A; Claus, G; Colledani, C; Dorokhov, M; Dritsa, C; Dulinski, W; Fröhlich, I; Goffe, M; Grandjean, D; Heini, S; Himmi, A; Hu, C; Jaaskelainen, K; Müntz, C; Shabetai, A; Stroth, J; Szelezniak, M; Valin, I; Winter, M

    2009-01-01

    CMOS Monolithic Active Pixel Sensors (MAPS) are proposed as a technology for various vertex detectors in nuclear and particle physics. We discuss the mechanisms of ionizing radiation damage on MAPS hosting the the dead time free, so-called self bias pixel. Moreover, we discuss radiation hardened sensor designs which allow operating detectors after exposing them to irradiation doses above 1 Mrad

  9. A stabilized, high stress self-biasing shape memory alloy actuator

    Science.gov (United States)

    Panton, B.; Zhou, Y. N.; Khan, M. I.

    2016-09-01

    A shape memory alloy (SMA) actuator that is biased internally would not need an external bias to achieve multiple actuation cycles. This would reduce cost, complexity and weight compared to standard one-way SMAs. The self-biasing actuators that have been developed to date have a lack of geometric and actuation stability. The current study developed a self-biasing NiTi actuator using a laser based vaporization process to alter the bulk composition of different regions. The martensitic laser processed NiTi region was the actuator, and un-processed austenitic base metal region was the internal bias. It was discovered that the laser processed region of the self-biasing actuator was unstable during high stress thermomechanical cycling due to the coarse grained microstructure. Cold-working of the half martensitic and half austenitic component resulted in similar deformation characteristics to single phase NiTi, which enabled the formation of a uniform nanocrystalline microstructure in both regions. When thermomechanically cycled 6000 times under stresses ranging from 180 to 400 MPa, it was discovered that this treated self-biasing actuator exhibited the stabilization behavior of traditional one-way actuators. This behavior was due to the uniform nanocrystalline microstructure, which impeded dislocation activity and ensured minimal plastic deformation.

  10. Geometry with Coordinates, Student's Text, Part II, Unit 48. Revised Edition.

    Science.gov (United States)

    Allen, Frank B.; And Others

    This is part two of a two-part SMSG geometry text for high school students. One of the goals of the text is the development of analytic geometry hand-in-hand with synthetic geometry. The authors emphasize that both are deductive systems and that it is useful to have more than one mode of attack in solving problems. The text begins the development…

  11. Terphenyl substituted derivatives of manganese(II): distorted geometries and resistance to elimination.

    Science.gov (United States)

    Ni, Chengbao; Fettinger, James C; Long, Gary J; Power, Philip P

    2010-11-28

    Reaction of {Li(THF)Ar'MnI(2)}(2) (Ar' = C(6)H(3)-2,6-(C(6)H(2)-2,6-(i)Pr(3))(2)) with LiAr', LiC≡CR (R = (t)Bu or Ph), or (C(6)H(2)-2,4,6-(i)Pr(3))MgBr(THF)(2) afforded the diaryl MnAr'(2) (1), the alkynyl salts Ar'Mn(C≡C(t)Bu)(4){Li(THF)}(3) (2) and Ar'Mn(C≡CPh)(3)Li(3)(THF)(Et(2)O)(2)(μ(3)-I) (3), and the manganate salt {Li(THF)}Ar'Mn(μ-I)(C(6)H(2)-2,4,6-(i)Pr(3)) (4), respectively. Complex 4 reacted with one equivalent of (C(6)H(2)-2,4,6-(i)Pr(3))MgBr(THF)(2) to afford the homoleptic dimer {Mn(C(6)H(2)-2,4,6-(i)Pr(3))(μ-C(6)H(2)-2,4,6-(i)Pr(3))}(2) (5), which resulted from the displacement of the bulkier Ar' ligand in preference to the halogen. The reaction of the more crowded {Li(THF)Ar*MnI(2)}(2) (Ar* = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-(i)Pr(3))(2)) with Li(t)Bu gave complex Ar*Mn(t)Bu (6). Complex 1 is a rare monomeric homoleptic two-coordinate diaryl Mn(II) complex; while 6 displays no tendency to eliminate β-hydrogens from the (t)Bu group because of the stabilization supplied by Ar*. Compounds 2 and 3 have cubane frameworks, which are constructed from a manganese, three carbons from three acetylide ligands, three lithiums, each coordinated by a donor, plus either a carbon from a further acetylide ligand (2) or an iodide (3). The Mn(II) atom in 4 has an unusual distorted T-shaped geometry while the dimeric 5 features trigonal planar manganese coordination. The chloride substituted complex Li(2)(THF)(3){Ar'MnCl(2)}(2) (7), which has a structure very similar to that of {Li(THF)Ar'MnI(2)}(2), was also prepared for use as a possible starting material. However, its generally lower solubility rendered it less useful than the iodo salt. Complexes 1-7 were characterized by X-ray crystallography and UV-vis spectroscopy. Magnetic studies of 2-4 and 6 showed that they have 3d(5) high-spin configurations.

  12. Field-Induced Co(II) Single-Ion Magnets with mer-Directing Ligands but Ambiguous Coordination Geometry.

    Science.gov (United States)

    Peng, Yan; Mereacre, Valeriu; Anson, Christopher E; Zhang, Yiquan; Bodenstein, Tilmann; Fink, Karin; Powell, Annie K

    2017-06-05

    Three air-stable Co(II) mononuclear complexes with different aromatic substituents have been prepared and structurally characterized by single-crystal X-ray diffraction. The mononuclear complexes [Co(H2L1)2]·2THF (1), [Co(HL2)2] (2), and [Co(H2L3)2]·CH2Cl2 (3) (where H3L1, H2L2, and H3L3 represent 3-hydroxy-naphthalene-2-carboxylic acid (6-hydroxymethyl-pyridin-2-ylmethylene) hydrazide, nicotinic acid (6-hydroxymethyl-pyridin-2-ylmethylene) hydrazide, and 2-hydroxy-benzoic acid (6-hydroxymethyl-pyridin-2-ylmethylene) hydrazide, respectively) feature a distorted mer octahedral coordination geometry. Detailed magnetic studies of 1-3 have been conducted using direct and alternating current magnetic susceptibility data. Field-induced slow magnetic relaxation was observed for these three complexes. There are few examples of such behavior in (distorted) octahedral coordination geometry (OC) Co(II) mononuclear complexes with uniaxial anisotropy. Analysis of the six-coordinate Co(II) mononuclear single-ion magnets (SIMs) in the literature using the SHAPE program revealed that they all show what is best described as distorted trigonal prismatic (TRP) coordination geometry, and in general, these show negative D zero-field splitting (ZFS) values. On the other hand, all the Co(II) mononuclear complexes displaying what is best approximated as distorted octahedral (OC) coordination geometry show positive D values. In the new Co(II) mononuclear complexes we describe here, there is an ambiguity, since the rigid tridentate ligands confer what is best described for an octahedral complex as a mer coordination geometry, but the actual shape of the first coordination sphere is between octahedral and trigonal prismatic. The negative D values observed experimentally and supported by high-level electronic structure calculations are thus in line with a trigonal prismatic geometry. However, a consideration of the rhombicity as indicated by the E value of the ZFS in conjunction with the

  13. Ion acceleration in a helicon source due to the self-bias effect

    Energy Technology Data Exchange (ETDEWEB)

    Wiebold, Matt; Sung, Yung-Ta; Scharer, John E. [University of Wisconsin-Madison, Electrical and Computer Engineering, Madison, Wisconsin 53706 (United States)

    2012-05-15

    Time-averaged plasma potential differences up to 165 V over several hundred Debye lengths are observed in low pressure (p{sub n} < 1 mTorr) expanding argon plasmas in the Madison Helicon eXperiment (MadHeX). The potential gradient leads to ion acceleration greater than that predicted by ambipolar expansion, exceeding E{sub i} Almost-Equal-To 7 kT{sub e} in some cases. RF power up to 500 W at 13.56 MHz is supplied to a half-turn, double-helix antenna in the presence of a nozzle magnetic field, adjustable up to 1 kG. A retarding potential analyzer (RPA) measures the ion energy distribution function (IEDF) and a swept emissive probe measures the plasma potential. Single and double probes measure the electron density and temperature. Two distinct mode hops, the capacitive-inductive (E-H) and inductive-helicon (H-W) transitions, are identified by jumps in density as RF power is increased. In the capacitive (E) mode, large fluctuations of the plasma potential (V{sub p-p} Greater-Than-Or-Equivalent-To 140V, V{sub p-p}/V{sub p} Almost-Equal-To 150%) exist at the RF frequency and its harmonics. The more mobile electrons can easily respond to RF-timescale gradients in the plasma potential whereas the inertially constrained ions cannot, leading to an initial flux imbalance and formation of a self-bias voltage between the source and expansion chambers. In the capacitive mode, the ion acceleration is not well described by an ambipolar relation, while in the inductive and helicon modes the ion acceleration more closely follows an ambipolar relation. The scaling of the potential gradient with the argon flow rate and RF power are investigated, with the largest potential gradients observed for the lowest flow rates in the capacitive mode. The magnitude of the self-bias voltage agrees with that predicted for RF self-bias at a wall. Rapid fluctuations in the plasma potential result in a time-dependent axial electron flux that acts to 'neutralize' the accelerated ion

  14. Geometry of the TJ-II in Astra 6.0; Geometria del TJ-II en Astra 6.0

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Bruna, D.; Romero, J.A.; Castejon, F.

    2006-07-01

    One of the most exploited features of the TJ-II Heliac, a facility in the Laboratorio Nacional de Fusion (CIEMAT, Madrid), is its ability to explore plasmas in different magnetic configurations. For this reason, there are available libraries that provide the metrics and associated magnitudes for many among all possible configurations. On the other hand, the transport codes that can normally be used to perform transport calculations cannot dea properly with these geometries, which is especially delicate when there are induced plasma currents. In the present work we adopt ASTRA, a transport analysis shell, to study the approximations performed when calculations that impose axi-symmetry (as ASTRA does) are performed on magnetic configurations that are not really axi-symmetric. After describing how we obtain those TJ-II metric averages that must be set in ASTRA, we perform two comparisons: (i) we obtain the vacuum rotational transform as deduced from the metric coefficients but imposing axisymmetry, and compare the results with the rotational transform yielded by the existing libraries; and (ii) we build a ID transport code with TJ-II metrics so its results can be compared with those of ASTRA. In both cases, the differences found indicate that evaluating the evolution of the rotational transform under ohmic induction and transport evolution is acceptable assuming that the geometry itself does not evolve. (Author) 11 refs.

  15. Nonassociative geometry in quasi-Hopf representation categories II: Connections and curvature

    CERN Document Server

    Barnes, Gwendolyn E; Szabo, Richard J

    2015-01-01

    We continue our systematic development of noncommutative and nonassociative differential geometry internal to the representation category of a quasitriangular quasi-Hopf algebra. We describe derivations, differential operators, differential calculi and connections using universal categorical constructions to capture algebraic properties such as Leibniz rules. Our main result is the construction of morphisms which provide prescriptions for lifting connections to tensor products and to internal homomorphisms. We describe the curvatures of connections within our formalism, and also the formulation of Einstein-Cartan geometry as a putative framework for a nonassociative theory of gravity.

  16. Nonassociative geometry in quasi-Hopf representation categories II: Connections and curvature

    Science.gov (United States)

    Barnes, Gwendolyn E.; Schenkel, Alexander; Szabo, Richard J.

    2016-08-01

    We continue our systematic development of noncommutative and nonassociative differential geometry internal to the representation category of a quasitriangular quasi-Hopf algebra. We describe derivations, differential operators, differential calculi and connections using universal categorical constructions to capture algebraic properties such as Leibniz rules. Our main result is the construction of morphisms which provide prescriptions for lifting connections to tensor products and to internal homomorphisms. We describe the curvatures of connections within our formalism, and also the formulation of Einstein-Cartan geometry as a putative framework for a nonassociative theory of gravity.

  17. OD(X/sup 2/II) and SD(X/sup 2/II) from reactions of D atoms with OCS under bulk and precursor geometry limited conditions

    Energy Technology Data Exchange (ETDEWEB)

    Haeusler, D.; Rice, J.; Wittig, C.

    1987-10-08

    Reactions of D atoms with OCS were studied by 193-nm pulsed laser photolysis of DBr as a nearly monoenergetic D-atom source. Nascent OD(X/sup 2/II) and SD(X/sup 2/II) rotational, vibrational, spin-orbit, and ..lambda..-doublet populations were obtained under single-collision bulk conditions at 300 K. The SD channel is favored energetically (..delta.. H = -43 +/- 13 and 230 +/- 13 kJ mol/sup -1/ for the SD and OD channels, respectively) and is the dominant pathway ((SD)/(OD) = 5 +/- 2). Nascent OD(X/sup 2/II) products were also obtained from a precursor geometry limited (PGL) reaction by using the weakly bound van der Waals complex SCO-DBr. The OD(X/sup 2/II) rotational distributions are the same for both bulk and PGL conditions and can be reproduced by using a statistical model. Due to experimental difficulties, SD(X/sup 2/II) distributions could not be obtained under PGL conditions. The SD(X/sup 2/II) distribution obtained under bulk conditions is very nonstatistical, suggesting that this species is not formed via a long-lived DSCO intermediate complex in which vibrational energy is randomized.

  18. Surface complexation and precipitate geometry for aqueous Zn(II) sorption on ferrihydrite: II. XANES analysis and simulation

    Science.gov (United States)

    Waychunas, G.A.; Fuller, C.C.; Davis, J.A.; Rehr, J.J.

    2003-01-01

    X-ray absorption near-edge spectroscopy (XANES) analysis of sorption complexes has the advantages of high sensitivity (10- to 20-fold greater than extended X-ray absorption fine structure [EXAFS] analysis) and relative ease and speed of data collection (because of the short k-space range). It is thus a potentially powerful tool for characterization of environmentally significant surface complexes and precipitates at very low surface coverages. However, quantitative analysis has been limited largely to "fingerprint" comparison with model spectra because of the difficulty of obtaining accurate multiple-scattering amplitudes for small clusters with high confidence. In the present work, calculations of the XANES for 50- to 200-atom clusters of structure from Zn model compounds using the full multiple-scattering code Feff 8.0 accurately replicate experimental spectra and display features characteristic of specific first-neighbor anion coordination geometry and second-neighbor cation geometry and number. Analogous calculations of the XANES for small molecular clusters indicative of precipitation and sorption geometries for aqueous Zn on ferrihydrite, and suggested by EXAFS analysis, are in good agreement with observed spectral trends with sample composition, with Zn-oxygen coordination and with changes in second-neighbor cation coordination as a function of sorption coverage. Empirical analysis of experimental XANES features further verifies the validity of the calculations. The findings agree well with a complete EXAFS analysis previously reported for the same sample set, namely, that octahedrally coordinated aqueous Zn2+ species sorb as a tetrahedral complex on ferrihydrite with varying local geometry depending on sorption density. At significantly higher densities but below those at which Zn hydroxide is expected to precipitate, a mainly octahedral coordinated Zn2+ precipitate is observed. An analysis of the multiple scattering paths contributing to the XANES

  19. Self-Biased 215MHz Magnetoelectric NEMS Resonator for Ultra-Sensitive DC Magnetic Field Detection

    Science.gov (United States)

    Nan, Tianxiang; Hui, Yu; Rinaldi, Matteo; Sun, Nian X.

    2013-06-01

    High sensitivity magnetoelectric sensors with their electromechanical resonance frequencies NEMS) resonator with an electromechanical resonance frequency of 215 MHz based on an AlN/(FeGaB/Al2O3) × 10 magnetoelectric heterostructure for detecting DC magnetic fields. This magnetoelectric NEMS resonator showed a high quality factor of 735, and strong magnetoelectric coupling with a large voltage tunable sensitivity. The admittance of the magnetoelectric NEMS resonator was very sensitive to DC magnetic fields at its electromechanical resonance, which led to a new detection mechanism for ultra-sensitive self-biased RF NEMS magnetoelectric sensor with a low limit of detection of DC magnetic fields of ~300 picoTelsa. The magnetic/piezoelectric heterostructure based RF NEMS magnetoelectric sensor is compact, power efficient and readily integrated with CMOS technology, which represents a new class of ultra-sensitive magnetometers for DC and low frequency AC magnetic fields.

  20. Self-Biasing High Precision CMOS Current Subtractor for Current-Mode Circuits

    Directory of Open Access Journals (Sweden)

    ARSLAN, E.

    2013-11-01

    Full Text Available In this study, a novel, differential pair based, high performance and high bandwidth current subtractor is proposed. Very low equivalent impedances are obtained at input ports n and p by using source follower transistors. Furthermore, the proposed circuit is self-biasing which makes it resistant to process, supply voltage and temperature variations. The proposed current subtractor can be used as an input stage for current-mode active circuits like current differencing buffered amplifier (CDBA, operational transresistance amplifier (OTRA and current differencing transconductance amplifier (CDTA which employ current subtractors. A numeric figure-of-merit is defined and it is used to demonstrate the superior performance of the proposed circuit.

  1. Self-Biased Differential Rectifier with Enhanced Dynamic Range for Wireless Powering

    KAUST Repository

    Ouda, Mahmoud H.

    2016-08-29

    A self-biased, cross-coupled, differential rectifier is proposed with enhanced power-conversion efficiency over an extended range of input power. A prototype is designed for UHF 433MHz RF power-harvesting applications and is implemented using 0.18μm CMOS technology. The proposed rectifier architecture is compared to the conventional cross-coupled rectifier. It demonstrates an improvement of more than 40% in the rectifier power conversion efficiency (PCE) and an input power range extension of more than 50% relative to the conventional crosscoupled rectifier. A sensitivity of -15.2dBm (30μW) input power for 1V output voltage and a peak power-conversion efficiency of 65% are achieved for a 50kω load. © 2004-2012 IEEE.

  2. Coordination geometries of Zn(II) and Cd(II) in phosphotriesterase: Influence of water molecules in the active site

    DEFF Research Database (Denmark)

    Krauss, M; Olsen, Lars; Antony, J

    2002-01-01

    Models of the metal ion binding sites of native ZnZn and of cadmium-substituted ZnCd and CdCd phosphotriesterase, including full amino acid side chains, were geometry optimized with quantum mechanical methods, with effective fragment potentials (EFP) representing the protein environment surrounding...... performed to analyze the experimentally determined chemical shifts at 212 and 116 ppm, respectively, for the CdCd enzyme. The calculated isotropic shieldings correlate with the coordination number of the metal ions, indicating that the CdCd enzyme has one more ligand at the high shift site than at the low...... shift site. Theoretically, a number of energetically close structures are found for the CdCd structure. Formally, one of these agrees with the X-ray structure and is supported by the NMR assignment. For the hybrid ZnCd enzyme, the most stable theoretical structure is Cd1Zn2, with the metal bound...

  3. Methylresorcinarene: a reaction vessel to control the coordination geometry of copper(II) in pyridine N-oxide copper(II) complexes.

    Science.gov (United States)

    Beyeh, Ngong Kodiah; Puttreddy, Rakesh

    2015-06-07

    Pyridine and 2-picolinic acid N-oxides form 2 : 2 and 2 : 1 ligand : metal (L : M) discrete L2M2 and polymeric complexes with CuCl2 and Cu(NO3)2, respectively, with copper(ii) salts. The N-oxides also form 1 : 1 host-guest complexes with methylresorcinarene. In combination, the three components form a unique 2 : 2 : 1 host-ligand-metal complex. The methylresorcinarene acts as a reaction vessel/protecting group to control the coordination of copper(ii) from cis-see-saw to trans-square planar, and from octahedral to square planar coordination geometry. These processes were studied in solution and in the solid state via(1)H NMR spectroscopy and single crystal X-ray diffraction.

  4. Optical knots and contact geometry II. From Hopf links to transverse and cosmetic knots

    CERN Document Server

    Kholodenko, Arkady L

    2014-01-01

    In 1985 Moffatt conjectured that in steady incompressible Euler-type fluids the streamlines could have knots/links of all types. Using methods of contact geometry Etnyre and Ghrist in 2000 developed the existence-type proof of the Moffatt conjecture. The alternative proof, also of existence-type, was proposed by Enciso and Peralta -Salas in 2012. In all three papers the Beltrami equation was used as point of departure. However, only work by Etnyre and Ghrist takes full advantage of contact-geometric nature of the Beltrami equation. In this work we propose the constructive proof of the Moffatt conjecture based on ideas and methods of contact geometry. We discuss in sufficient detail various physical processes generating such knotted structures. By employing the correspondence between ideal hydrodynamics and electrodynamics discussed in part I, the Moffatt conjecture is proved for Maxwellian electrodynamics. The potential relevance of the obtained results for source-free Yang-Mills and gravity fields is also br...

  5. Differential geometry and mathematical physics part II fibre bundles, topology and gauge fields

    CERN Document Server

    Rudolph, Gerd

    2017-01-01

    The book is devoted to the study of the geometrical and topological structure of gauge theories. It consists of the following three building blocks:- Geometry and topology of fibre bundles,- Clifford algebras, spin structures and Dirac operators,- Gauge theory.Written in the style of a mathematical textbook, it combines a comprehensive presentation of the mathematical foundations with a discussion of a variety of advanced topics in gauge theory.The first building block includes a number of specific topics, like invariant connections, universal connections, H-structures and the Postnikov approximation of classifying spaces.Given the great importance of Dirac operators in gauge theory, a complete proof of the Atiyah-Singer Index Theorem is presented. The gauge theory part contains the study of Yang-Mills equations (including the theory of instantons and the classical stability analysis), the discussion of various models with matter fields (including magnetic monopoles, the Seiberg-Witten model and dimensional r...

  6. Special geometry of euclidean supersymmetry II. Hypermultiplets and the c-map

    Energy Technology Data Exchange (ETDEWEB)

    Cortes, Vicente [Institut de Mathematiques Elie Cartan, Universite Henri Poincare - Nancy I, B.P. 239, F-54506 Vandoeuvre-les-Nancy (France); Mayer, Christoph [Theoretisch-Physikalisches Institut, Friedrich-Schiller-Universitaet Jena, Max-Wien-Platz 1, D-07743 Jena (Germany); Mohaupt, Thomas [Theoretisch-Physikalisches Institut, Friedrich-Schiller-Universitaet Jena, Max-Wien-Platz 1, D-07743 Jena (Germany); Saueressig, Frank [Institute for Theoretical Physics and Spinoza Institute, Postbus 80.195, 3508 TD Utrecht (Netherlands)

    2005-06-01

    We construct two new versions of the c-map which allow us to obtain the target manifolds of hypermultiplets in euclidean theories with rigid N = 2 supersymmetry. While the minkowskian para-c-map is obtained by dimensional reduction of the minkowskian vector multiplet lagrangian over time, the euclidean para-c-map corresponds to the dimensional reduction of the euclidean vector multiplet lagrangian. In both cases the resulting hypermultiplet target spaces are para-hyper-Kaehler manifolds. We review and prove the relevant results of para-complex and para-hypercomplex geometry. In particular, we give a second, purely geometrical construction of both c-maps, by proving that the cotangent bundle N = T*M of any affine special (para-)Kaehler manifold M is para-hyper-Kaehler.

  7. On geometry of deformed black holes: II. Schwarzschild hole surrounded by a Bach-Weyl ring

    CERN Document Server

    Basovník, M

    2016-01-01

    We continue to study the response of black-hole space-times on the presence of additional strong sources of gravity. Restricting ourselves to static and axially symmetric (electro-)vacuum exact solutions of Einstein's equations, we first considered the Majumdar--Papapetrou solution for a binary of extreme black holes in a previous paper, while here we deal with a Schwarzschild black hole surrounded by a concentric thin ring described by the Bach--Weyl solution. The geometry is again revealed on the simplest invariants determined by the metric (lapse function) and its gradient (gravitational acceleration), and by curvature (Kretschmann scalar). Extending the metric inside the black hole along null geodesics tangent to the horizon, we mainly focus on the black-hole interior (specifically, on its sections at constant Killing time) where the quantities behave in a way indicating a surprisingly strong influence of the external source. Being already distinct on the level of potential and acceleration, this is still...

  8. Current gain mechanism in planar GaAs MESFETs due to new photovoltaic self-biasing edge-effect.

    OpenAIRE

    Abbott, Derek; Eshraghian, K.

    1996-01-01

    A significant new internal gain effect, in planar MES­FETs has been discovered which we call the "photo­voltaic self-biasing edge-effect." The edge-effect can be exploited to attain up to a factor of ten improvement in detector photosensitivity.

  9. Lie algebra automorphisms as Lie point symmetries and the solution space for Bianchi Type I, II, IV, V vacuum geometries

    CERN Document Server

    Terzis, Petros A

    2010-01-01

    Lie group symmetry analysis for systems of coupled, nonlinear ordinary differential equations is performed in order to obtain the entire solution space to Einstein's field equations for vacuum Bianchi spacetime geometries. The symmetries used are the automorphisms of the Lie algebra of the corresponding three- dimensional isometry group acting on the hyper-surfaces of simultaneity for each Bianchi Type, as well as the scaling and the time reparametrization symmetry. The method is applied to Bianchi Types I; II; IV and V. The result is the acquisition, in each case, of the entire solution space of either Lorenzian of Euclidean signature. This includes all the known solutions for each Type and the general solution of Type IV (in terms of sixth Painlev\\'e transcendent PVI).

  10. Geometry of deformed black holes. II. Schwarzschild hole surrounded by a Bach-Weyl ring

    Science.gov (United States)

    Basovník, M.; Semerák, O.

    2016-08-01

    We continue to study the response of black-hole space-times on the presence of additional strong sources of gravity. Restricting ourselves to static and axially symmetric (electro)vacuum exact solutions of Einstein's equations, we first considered the Majumdar-Papapetrou solution for a binary of extreme black holes in a previous paper, while here we deal with a Schwarzschild black hole surrounded by a concentric thin ring described by the Bach-Weyl solution. The geometry is again revealed on the simplest invariants determined by the metric (lapse function) and its gradient (gravitational acceleration), and by curvature (Kretschmann scalar). Extending the metric inside the black hole along null geodesics tangent to the horizon, we mainly focus on the black-hole interior (specifically, on its sections at constant Killing time) where the quantities behave in a way indicating a surprisingly strong influence of the external source. Being already distinct on the level of potential and acceleration, this is still more pronounced on the level of curvature: for a sufficiently massive and/or nearby (small) ring, the Kretschmann scalar even becomes negative in certain toroidal regions mostly touching the horizon from inside. Such regions have been interpreted as those where magnetic-type curvature dominates, but here we deal with space-times which do not involve rotation and the negative value is achieved due to the electric-type components of the Riemann/Weyl tensor. The Kretschmann scalar also shapes rather nontrivial landscapes outside the horizon.

  11. Twisted versus braided magnetic flux ropes in coronal geometry. II. Comparative behaviour

    Science.gov (United States)

    Prior, C.; Yeates, A. R.

    2016-06-01

    Aims: Sigmoidal structures in the solar corona are commonly associated with magnetic flux ropes whose magnetic field lines are twisted about a mutual axis. Their dynamical evolution is well studied, with sufficient twisting leading to large-scale rotation (writhing) and vertical expansion, possibly leading to ejection. Here, we investigate the behaviour of flux ropes whose field lines have more complex entangled/braided configurations. Our hypothesis is that this internal structure will inhibit the large-scale morphological changes. Additionally, we investigate the influence of the background field within which the rope is embedded. Methods: A technique for generating tubular magnetic fields with arbitrary axial geometry and internal structure, introduced in part I of this study, provides the initial conditions for resistive-MHD simulations. The tubular fields are embedded in a linear force-free background, and we consider various internal structures for the tubular field, including both twisted and braided topologies. These embedded flux ropes are then evolved using a 3D MHD code. Results: Firstly, in a background where twisted flux ropes evolve through the expected non-linear writhing and vertical expansion, we find that flux ropes with sufficiently braided/entangled interiors show no such large-scale changes. Secondly, embedding a twisted flux rope in a background field with a sigmoidal inversion line leads to eventual reversal of the large-scale rotation. Thirdly, in some cases a braided flux rope splits due to reconnection into two twisted flux ropes of opposing chirality - a phenomenon previously observed in cylindrical configurations. Conclusions: Sufficiently complex entanglement of the magnetic field lines within a flux rope can suppress large-scale morphological changes of its axis, with magnetic energy reduced instead through reconnection and expansion. The structure of the background magnetic field can significantly affect the changing morphology of a

  12. Geometry from Information Geometry

    CERN Document Server

    Caticha, Ariel

    2015-01-01

    We use the method of maximum entropy to model physical space as a curved statistical manifold. It is then natural to use information geometry to explain the geometry of space. We find that the resultant information metric does not describe the full geometry of space but only its conformal geometry -- the geometry up to local changes of scale. Remarkably, this is precisely what is needed to model "physical" space in general relativity.

  13. Schottky junctions on perovskite single crystals: light-modulated dielectric constant and self-biased photodetection

    KAUST Repository

    Shaikh, Parvez A.

    2016-08-16

    Schottky junctions formed between semiconductors and metal contacts are ubiquitous in modern electronic and optoelectronic devices. Here we report on the physical properties of Schottky-junctions formed on hybrid perovskite CH3NH3PbBr3 single crystals. It is found that light illumination can significantly increase the dielectric constant of perovskite junctions by 2300%. Furthermore, such Pt/perovskite junctions are used to fabricate self-biased photodetectors. A photodetectivity of 1.4 × 1010 Jones is obtained at zero bias, which increases to 7.1 × 1011 Jones at a bias of +3 V, and the photodetectivity remains almost constant in a wide range of light intensity. These devices also exhibit fast responses with a rising time of 70 μs and a falling time of 150 μs. As a result of the high crystal quality and low defect density, such single-crystal photodetectors show stable performance after storage in air for over 45 days. Our results suggest that hybrid perovskite single crystals provide a new platform to develop promising optoelectronic applications. © 2016 The Royal Society of Chemistry.

  14. Self-Biased-SMA Drive PU Microgripper with Force Sensing in Visual Servo

    Directory of Open Access Journals (Sweden)

    Ren-Jung Chang

    2013-06-01

    Full Text Available An innovative design of a polyurethane microgripper system with force sensor is developed for the measurement of gripping force in vision-based control. A microgripper mechanism integrated with a force sensing arm is fabricated by an excimer laser. The microgripper is actuated by a self-biased-SMA (Shape Memory Alloy actuator. A computer-vision method through the ERES (Extended Regional Edge Statistics algorithm is employed to track the motion of gripper. The position information of the gripping point together with the deflection of the force sensing arm is utilized for sensing force. A fuzzy expert with a PI controller in a visual servo is employed to test the performance of sensing the gripping force in grasping of 38μm diameter metal rod. In the performance test, the microgripper system provides a maximum gripping size of 40μm, a maximum force resolution of 1μN and a maximum gripping force of 58μN.

  15. Magnetic fields, stellar feedback, and the geometry of H II Regions

    CERN Document Server

    Ferland, Gary J

    2009-01-01

    Magnetic pressure has long been known to dominate over gas pressure in atomic and molecular regions of the interstellar medium. Here I review several recent observational studies of the relationships between the H^+, H^0 and H_2 regions in M42 (the Orion complex) and M17. A simple picture results. When stars form they push back surrounding material, mainly through the outward momentum of starlight acting on grains, and field lines are dragged with the gas due to flux freezing. The magnetic field is compressed and the magnetic pressure increases until it is able to resist further expansion and the system comes into approximate magnetostatic equilibrium. Magnetic field lines can be preferentially aligned perpendicular to the long axis of quiescent cloud before stars form. After star formation and pushback occurs ionized gas will be constrained to flow along field lines and escape from the system along directions perpendicular to the long axis. The magnetic field may play other roles in the physics of the H II r...

  16. Giant low-frequency multipeak self-biased magnetoelectric properties in four-phase structure with stepped ultrasonic horn

    Science.gov (United States)

    Li, Jie; Lu, Caijiang

    2016-11-01

    This paper develops a self-biased magnetoelectric (ME) heterostructure FeCuNbSiB/terfenol-d/ultrasonic-horn/PZT by sandwiching a piezoelectric Pb(Zr,Ti)O3 (PZT) plate and a magnetization-graded FeCuNbSiB/terfenol-d layer on a rectangular-stepped ultrasonic horn substrate. The rectangular-stepped ultrasonic horn substrate severs as the resonance frequency determining element of the ME heterostructure, converges and amplifies the vibration excited by the magnetization-graded FeCuNbSiB/terfenol-d layer. The experiments show that fifteen large peaks of ME response with magnitudes of 0.2-7.5 V/(cm·Oe) in 0.5-50 kHz range are observed at zero-biased magnetic field. This demonstrates that the proposed multi-peak self-biased heterostructure may be useful for multifunctional devices for multi-frequency operation.

  17. Large self-biased magnetoelectric response in four-phase heterostructure with multiple low-frequency peaks

    Science.gov (United States)

    Zhang, Hao; Lu, Caijiang; Sun, Zhixue

    2015-01-01

    This paper develops a self-biased magnetoelectric (ME) heterostructure FeCuNbSiB/Terfenol-D/Be-bronze/Pb(Zr,Ti)O3 (PZT) by sandwiching a nonmagnetic elastic Be-bronze plate between an piezoelectric PZT plate and a magnetization-graded FeCuNbSiB/Terfenol-D layer. The Be-bronze plate severs as the resonance frequency determining element of the ME heterostructure. By using the magnetization-graded magnetostrictive layer and the elastic Be-bronze plate, seven large peaks of ME response with magnitudes of 0.3-10 (V/cm Oe) in 1-70 kHz range are observed at zero-biased magnetic field. This demonstrates that the proposed multi-peak self-biased heterostructure may be useful for multifunctional devices such as multi-frequency energy harvesters or low-frequency ac magnetic field sensors.

  18. Design and analysis of a self-biased broadband magnetoelectric cantilever operated at multi-frequency windows

    Science.gov (United States)

    Ma, J. N.; Xin, C. Z.; Ma, J.; Lin, Y. H.; Nan, C. W.

    2017-03-01

    Magnetoelectric (ME) composites with self-biased and wide resonance frequency band properties are promising candidates for magnetic field sensor and energy harvester. Here, we present a ME cantilever by in-series connecting a few SrFe12O19/Metglas/Pb(Zr,Ti)O3 components. Due to the in-built magnetic bias of SrFe12O19, the ME cantilever shows self-biased property. Meanwhile, by merging the resonance responses of the in-series ME components together, the ME cantilever presents multi-wide resonance bands (i.e., 500 Hz ˜ 700 Hz, 3.3 kHz ˜ 4.4 kHz and 44 kHz ˜ 70 kHz). In these three wide frequency windows, the ME voltage coefficients (α V) of the ME cantilever are higher than 40 mV/Oe, 115 mV/Oe and 400 mV/Oe, respectively.

  19. Optimizing a neutron-beam focusing device for the direct geometry time-of-flight spectrometer TOFTOF at the FRM II reactor source

    DEFF Research Database (Denmark)

    Rasmussen, N. G.; Simeoni, G. G.; Lefmann, K.

    2016-01-01

    A dedicated beam-focusing device has been designed for the direct geometry thermal-cold neutron time-of-flight spectrometer TOFTOF at the neutron facility FRM II (Garching, Germany). The prototype, based on the compressed Archimedes' mirror concept, benefits from the adaptive-optics technology (a...

  20. Tuning of coordination geometry via cooperation of inter- and intramolecular hydrogen bonds in bis(benzoylacetonato)manganese(II) adducts with pyridine derivatives

    NARCIS (Netherlands)

    Cvrtila, Ivica; Stilinovic, Vladimir; Kaitner, Branko

    2013-01-01

    In order to study the effects of intramolecular hydrogen bonding on coordination geometry of a relatively rigid octahedral system, eight coordination compounds derived from bis(benzoylacetonato)manganese(II) and seven pyridine derivatives (three of them o-aminopyridines) were prepared. Four compound

  1. Tuning of coordination geometry via cooperation of inter- and intramolecular hydrogen bonds in bis(benzoylacetonato)manganese(II) adducts with pyridine derivatives

    NARCIS (Netherlands)

    Cvrtila, Ivica; Stilinovic, Vladimir; Kaitner, Branko

    2013-01-01

    In order to study the effects of intramolecular hydrogen bonding on coordination geometry of a relatively rigid octahedral system, eight coordination compounds derived from bis(benzoylacetonato)manganese(II) and seven pyridine derivatives (three of them o-aminopyridines) were prepared. Four

  2. Body-contact self-bias effect in partially depleted SOI-CMOS and alternatives to suppress floating body effect

    Institute of Scientific and Technical Information of China (English)

    Zhou Jianhua; Gao Minghui; S.K.Pang; Zou Shichang

    2011-01-01

    As SOI-CMOS technology nodes reach the tens of nanometer regime, body-contacts become more and more ineffective to suppress the floating body effect In this paper self-bias effect as the cause for this failure is analyzed and discussed in depth with respect to different structures and conditions Other alterative approaches to suppressing the floating body effect are also introduced and discussed.

  3. Multipeak self-biased magnetoelectric coupling characteristics in four-phase Metglas/Terfenol-D/Be-bronze/PMN-PT structure

    Directory of Open Access Journals (Sweden)

    Dongyan Huang

    2015-04-01

    Full Text Available This letter develops a self-biased magnetoelectric (ME structure Metglas/Terfenol-D/Be-bronze/PMN-PT (MTBP consisting of a magnetization-graded Metglas/Terfenol-D layer, a elastic Be-bronze plate, and a piezoelectric 0.67Pb(Mg1/3Nb2/3O3-0.33PbTiO3 (PMN-PT plate. By using the magnetization-graded Metglas/Terfenol-D layer and the elastic Be-bronze plate, multi-peak self-biased ME responses are obtained in MTBP structure. The experimental results show that the MTBP structure with two layers of Metglas foil has maximum zero-biased ME voltage coefficient (MEVC. As frequency increases from 0.5 to 90 kHz, eleven large peaks of MEVC with magnitudes of 0.75-33 V/(cm Oe are observed at zero-biased magnetic field. The results demonstrate that the proposed multi-peak self-biased ME structure may be useful for multifunctional devices such as multi-frequency energy harvesters or low-frequency ac magnetic field sensors.

  4. Multipeak self-biased magnetoelectric coupling characteristics in four-phase Metglas/Terfenol-D/Be-bronze/PMN-PT structure

    Science.gov (United States)

    Huang, Dongyan; Lu, Caijiang; Bing, Han

    2015-04-01

    This letter develops a self-biased magnetoelectric (ME) structure Metglas/Terfenol-D/Be-bronze/PMN-PT (MTBP) consisting of a magnetization-graded Metglas/Terfenol-D layer, a elastic Be-bronze plate, and a piezoelectric 0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 (PMN-PT) plate. By using the magnetization-graded Metglas/Terfenol-D layer and the elastic Be-bronze plate, multi-peak self-biased ME responses are obtained in MTBP structure. The experimental results show that the MTBP structure with two layers of Metglas foil has maximum zero-biased ME voltage coefficient (MEVC). As frequency increases from 0.5 to 90 kHz, eleven large peaks of MEVC with magnitudes of 0.75-33 V/(cm Oe) are observed at zero-biased magnetic field. The results demonstrate that the proposed multi-peak self-biased ME structure may be useful for multifunctional devices such as multi-frequency energy harvesters or low-frequency ac magnetic field sensors.

  5. Constraints on the Geometry of the Obscuring Torus from the NuSTAR Survey of the Local Seyfert II Population

    Science.gov (United States)

    Balokovic, Mislav; Harrison, Fiona; Brightman, Murray

    2017-08-01

    The obscuring torus is one of the main components of the basic unified model of active galactic nuclei (AGN), needed to create anisotropy in obscuration as a function of the viewing angle. We present the first study of the geometrical properties of the AGN torus in a large and representative sample of type II Seyfert nuclei. The sample consists of 124 AGN selected in the hard X-ray band from the Swift/BAT 70-month catalog and observed simultaneously with NuSTAR and Swift/XRT. These data enable us to explore the constraints that observed spectra place on the properties of the obscuring torus in individual AGN and in the local population of Seyfert II nuclei. We make use of empirically motivated spectral models for X-ray reprocessing in approximately toroidal geometry for constraining the distribution of the average column density of the torus, and the distribution of the torus covering factor within this sample. We find that the torus-averaged column density is independent of the line-of-sight column density, with typical column density that is borderline Compton-thick, i.e., around the unity optical depth for Compton scattering. The distribution of torus covering factors is broad but shows a preference for high covering, peaking around the covering factor of 90%, with the median at 70%, in agreement with recent sample studies in the infrared band. We also examine the dependence of the covering factor on intrinsic luminosity, finding that the median covering factor peaks around the intrinsic X-ray luminosity of 10^42.5 erg/s and decreases toward both lower and higher luminosities.

  6. The interaction between self-bias and reward: Evidence for common and distinct processes.

    Science.gov (United States)

    Sui, Jie; Humphreys, Glyn W

    2015-01-01

    The perceptual matching of shapes and labels can be affected by both self- and reward-biases when shapes are linked either to labels referring to particular individuals (you, friend, stranger) or to different reward values (£8, £2, £0). We investigated the relations between these biases by varying the reward value associated with particular shape-label pairs (circle-you, square-friend, triangle-stranger). Self shape-label pairs (circle-you) always received no reward, while friend shape-label pairs (square-friend) received high reward and stranger shape-label pairs low reward (triangle-stranger), or the reverse (friend-low reward; stranger-high reward). Despite receiving no reward, responses to self-related pairs were advantaged relative to those to low-reward stimuli and did not differ from those to high-reward items. There was also an advantage for responses to high-reward friend pairs relative to low-reward stranger stimuli, and for high-reward stranger stimuli compared to low-reward friends. Correlations across individuals were found across trial blocks for both the self-advantage and the high-reward advantage, but the self- and reward-advantages were uncorrelated. This suggests that the self- and reward-advantage effects have different origins. In addition, the magnitude of the self-advantage varied according to the rated personal distance between a participant and a stranger. For individuals manifesting a close personal distance to strangers, the self-advantage was smaller, and sensitivity to reward influenced the difference between the self- and high-reward conditions. For individuals manifesting a large personal distance to strangers, sensitivity to reward did not affect self-matching. We suggest that self-advantages on perceptual matching arise independent of reward for individuals with a large personal distance to strangers. On the other hand, in individuals with a weak self-bias, high reward and the self modulate a common subjective value system.

  7. Palladium(II)-Catalyzed Annulation between ortho-Alkenylphenols and Allenes. Key Role of the Metal Geometry in Determining the Reaction Outcome

    Science.gov (United States)

    2016-01-01

    2-Alkenylphenols react with allenes, upon treatment with catalytic amounts of Pd(II) and Cu(II), to give benzoxepine products in high yields and with very good regio- and diastereoselectivities. This contrasts with the results obtained with Rh catalysts, which provided chromene-like products through a pathway involving a β-hydrogen elimination step. Computational studies suggest that the square planar geometry of the palladium is critical to favor the reductive elimination process required for the formation of the oxepine products.

  8. Enhanced stability against spin torque noise in current perpendicular to the plane self-biased differential dual spin valves

    Energy Technology Data Exchange (ETDEWEB)

    Chandra Sekhar, M. [Data Storage Institute, A*STAR (Agency for Science Technology and Research), 5 Engineering Drive 1, DSI Building, Singapore 117608 (Singapore); School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371 (Singapore); Tran, M., E-mail: Michael_TRAN@dsi.a-star.edu.sg [Data Storage Institute, A*STAR (Agency for Science Technology and Research), 5 Engineering Drive 1, DSI Building, Singapore 117608 (Singapore); Wang, L.; Han, G.C. [Data Storage Institute, A*STAR (Agency for Science Technology and Research), 5 Engineering Drive 1, DSI Building, Singapore 117608 (Singapore); Lew, W.S. [School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371 (Singapore)

    2015-01-15

    We present a detailed study of spin-transfer torque induced noise in self-biased differential dual spin valves (DDSV) which could be potentially used as magnetic read-heads for hard-disk drives. Micromagnetics studies of DDSV were performed in all the major magnetic configurations experienced by read-heads and we show that in every case, self-biased DDSV provide a much stronger stability against spin-transfer torque noise than conventional spin valves. Provided are also insights on the influence of the dipolar interlayer coupling, shape anisotropy, exchange bias and relative orientation between the 2 free layers. Our results demonstrate the viability of DDSV read-heads for future hard disk drives generations. - Highlights: • DDSVs show better stability against STT noise as compared to single spin valves. • Flux-closure configuration plays a key role in stabilizing the DDSV against STT noise. • Anti-ferromagnetic interlayer coupling shifts the critical current density for onset of noise. • Gap layer thickness has to be controlled carefully to avoid ferromagnetic coupling.

  9. A study of the electrical properties of self-biased channel MOS diodes for solar-cell applications

    Directory of Open Access Journals (Sweden)

    Tsugutomo Kudoh

    2017-01-01

    Full Text Available We propose two types of low-cost, low-loss diodes as alternatives to Schottky barrier diodes (SBDs for use as bypass diodes connected in parallel with solar-cell panels. Both of our proposed devices are self-biasing channel MOS diodes consisting of an n-channel MOS structure that features three-terminal operation combined with a DMOS cell structure exploiting self-biasing effects. By reducing the threshold voltage of the MOS gate, these devices feature lower on-voltages and lower rates of growth in the reverse leakage current with increasing temperature, thus preventing thermal runaway. To investigate the properties of our devices, we used a device simulator to analyze their performance as bypass diodes for a solar-cell panel. Our results indicate that when a shadow partially covers the cell, the current flowing on the load side of the solar-cell panel is about 50% larger than that observed for a Cr SBD, indicating the potential for significantly improved performance.

  10. Multi-objective optimization of weld geometry in hybrid fiber laser-arc butt welding using Kriging model and NSGA-II

    Science.gov (United States)

    Gao, Zhongmei; Shao, Xinyu; Jiang, Ping; Wang, Chunming; Zhou, Qi; Cao, Longchao; Wang, Yilin

    2016-06-01

    An integrated multi-objective optimization approach combining Kriging model and non-dominated sorting genetic algorithm-II (NSGA-II) is proposed to predict and optimize weld geometry in hybrid fiber laser-arc welding on 316L stainless steel in this paper. A four-factor, five-level experiment using Taguchi L25 orthogonal array is conducted considering laser power ( P), welding current ( I), distance between laser and arc ( D) and traveling speed ( V). Kriging models are adopted to approximate the relationship between process parameters and weld geometry, namely depth of penetration (DP), bead width (BW) and bead reinforcement (BR). NSGA-II is used for multi-objective optimization taking the constructed Kriging models as objective functions and generates a set of optimal solutions with pareto-optimal front for outputs. Meanwhile, the main effects and the first-order interactions between process parameters are analyzed. Microstructure is also discussed. Verification experiments demonstrate that the optimum values obtained by the proposed integrated Kriging model and NSGA-II approach are in good agreement with experimental results.

  11. Generation of pure spin currents via spin Seebeck effect in self-biased hexagonal ferrite thin films

    Energy Technology Data Exchange (ETDEWEB)

    Li, Peng; Ellsworth, David; Chang, Houchen; Janantha, Praveen; Richardson, Daniel; Phillips, Preston; Vijayasarathy, Tarah; Wu, Mingzhong, E-mail: mwu@lamar.colostate.edu [Department of Physics, Colorado State University, Fort Collins, Colorado 80523 (United States); Shah, Faisal [Department of Electrical Engineering, University of Notre Dame, Notre Dame, Indiana 46556 (United States)

    2014-12-15

    Light-induced generation of pure spin currents in a Pt(2.5 nm)/BaFe{sub 12}O{sub 19}(1.2 μm)/sapphire(0.5 mm) structure is reported. The BaFe{sub 12}O{sub 19} film had strong in-plane uniaxial anisotropy and was therefore self-biased. Upon exposure to light, a temperature difference (ΔT) was established across the BaFe{sub 12}O{sub 19} thickness that gave rise to a pure spin current in the Pt via the spin Seebeck effect. Via the inverse spin Hall effect, the spin current produced an electric voltage across one of the Pt lateral dimensions. The voltage varied with time in the same manner as ΔT and flipped its sign when the magnetization in BaFe{sub 12}O{sub 19} was reversed.

  12. Anisotropic self-biased dual-phase low frequency magneto-mechano-electric energy harvesters with giant power densities

    Directory of Open Access Journals (Sweden)

    Deepak Rajaram Patil

    2014-04-01

    Full Text Available We report the physical behavior of self-biased multi-functional magneto-mechano-electric (MME laminates simultaneously excited by magnetic and/or mechanical vibrations. The MME laminates composed of Ni and single crystal fiber composite exhibited strong ME coupling under Hdc = 0 Oe at both low frequency and at resonance frequency. Depending on the magnetic field direction with respect to the crystal orientation, the energy harvester showed strong in-plane anisotropy in the output voltage and was found to generate open circuit output voltage of 20 Vpp and power density of 59.78 mW/Oe2 g2 cm3 under weak magnetic field of 1 Oe and mechanical vibration of 30 mg, at frequency of 21 Hz across 1 MΩ resistance.

  13. EXAFS study on yttrium oxide thin films deposited by RF plasma enhanced MOCVD under the influence of varying RF self-bias

    Energy Technology Data Exchange (ETDEWEB)

    Chopade, S.S. [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Nayak, C.; Bhattacharyya, D.; Jha, S.N.; Tokas, R.B.; Sahoo, N.K. [Atomic and Molecular Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Patil, D.S., E-mail: dspatil@barc.gov.in [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

    2014-09-30

    Highlights: • Local structure and surface morphology of Y{sub 2}O{sub 3} thin films deposited by RF plasma MOCVD at different RF self-bias level investigated by EXAFS and AFM. • Bond length and oxygen coordination changes with bias. • Films are nanostructured with structural distortion at higher bias. • Surface morphology of films changes with bias. • Changes observed in local structural parameters are correlated with observed properties of films. • EXAFS study on Y{sub 2}O{sub 3} films deposited under different RF self-bias levels is not been reported so far. - Abstract: Extended X-ray absorption fine structure (EXAFS) and atomic force microscopy (AFM) studies are carried out on yttrium oxide (Y{sub 2}O{sub 3}) thin films deposited by radio frequency plasma assisted metalorganic chemical vapor deposition (MOCVD) process at different RF self-bias (−50 V to −175 V with a step of −25 V) on silicon substrates. A (2,2,6,6-tetramethyl-3,5-heptanedionate) yttrium (commonly known as Y(thd){sub 3}) precursor is used in a plasma of argon and oxygen gases at a substrate temperature of 350 °C for deposition. To gain profound understanding about influence of RF self-bias on the properties of the deposited Y{sub 2}O{sub 3} thin films, the films are characterized by EXAFS and AFM measurements. From the EXAFS measurements it is observed that oxygen co-ordination is high for the film deposited at the lowest self bias (−50 V) which is due to presence of higher amount of hydroxyl group in the sample. Oxygen coordination however decrease to lower values for the films deposited at self bias of −75 V. Y-O bond length decreases gradually with increase in self bias indicating reduction in hydroxyl content. However there is reduction in bond length for the film deposited at −100 V as compared to other films resulting from structural changes. The disorder factor obtained from EXAFS measurement increases for films deposited at voltages beyond −125 V due to

  14. Geometry matters: inverse cytotoxic relationship for cis/trans-Ru(ii) polypyridyl complexes from cis/trans-[PtCl2(NH3)2].

    Science.gov (United States)

    Wachter, Erin; Zamora, Ana; Heidary, David K; Ruiz, José; Glazer, Edith C

    2016-08-09

    Two thermally activated ruthenium(ii) polypyridyl complexes, cis-Ru(bpy)2Cl2 and trans-Ru(qpy)Cl2 were investigated to determine the impact of the geometric arrangement of the exchangable ligands on the potential of the compounds to act as chemotherapeutics. In contrast to the geometry requirements for cisplatin, trans-Ru(qpy)Cl2 was 7.1-9.5× more cytotoxic than cis-Ru(bpy)2Cl2. This discovery could open up a new area of metal-based chemotherapeutic research.

  15. Cobalt(II), nickel(II) and copper(II) complexes of a hexadentate pyridine amide ligand. Effect of donor atom (ether vs. thioether) on coordination geometry, spin-state of cobalt and M(III)-M(II) redox potential.

    Science.gov (United States)

    Pandey, Sharmila; Das, Partha Pratim; Singh, Akhilesh Kumar; Mukherjee, Rabindranath

    2011-10-28

    Using an acyclic hexadentate pyridine amide ligand, containing a -OCH(2)CH(2)O- spacer between two pyridine-2-carboxamide units (1,4-bis[o-(pyrydine-2-carboxamidophenyl)]-1,4-dioxabutane (H(2)L(9)), in its deprotonated form), four new complexes, [Co(II)(L(9))] (1) and its one-electron oxidized counterpart [Co(III)(L(9))][NO(3)]·2H(2)O (2), [Ni(II)(L(9))] (3) and [Cu(II)(L(9))] (4), have been synthesized. Structural analyses revealed that the Co(II) centre in 1 and the Ni(II) centre in 3 are six-coordinate, utilizing all the available donor sites and the Cu(II) centre in 4 is effectively five-coordinated (one of the ether O atoms does not participate in coordination). The structural parameters associated with the change in the metal coordination environment have been compared with corresponding complexes of thioether-containing hexadentate ligands. The μ(eff) values at 298 K of 1-4 correspond to S = 3/2, S = 0, S = 1 and S = 1/2, respectively. Absorption spectra for all the complexes have been investigated. EPR spectral properties of the copper(II) complex 4 have been investigated, simulated and analyzed. Cyclic voltammetric experiments in CH(2)Cl(2) reveal quasireversible Co(III)-Co(II), Ni(III)-Ni(II) and Cu(II)-Cu(I) redox processes. In going from ether O to thioether S coordination, the effect of the metal coordination environment on the redox potential values of Co(III)-Co(II) (here the effect of spin-state as well), Ni(III)-Ni(II) and Cu(II)-Cu(I) processes have been systematically analyzed.

  16. Radion stability and induced, on-brane geometries in an effective scalar-tensor theory of gravity II

    CERN Document Server

    Kar, Sayan; SenGupta, Soumitra

    2015-01-01

    In our earlier article (Phys.Rev. {\\bf D 88} 083506,(2013)) we had obtained spherically symmetric, static on-brane geometries in the Kanno-Soda effective scalar-tensor theory of gravity. The solution found was the extremal Reissner--Nordstrom black hole (the Majumdar-Papapetrou solution). In this article, we extend our analysis to more general, spherically symmetric, static geometries which are non-extremal in nature. The solution is nothing other than the well-known Reissner--Nordstrom solution. We find the radion field profiles for the various cases and also look into the issue of radion stability. Finally, the energy-momentum tensor for the effective on-brane matter is obtained and we observe that it can satisfy all energy conditions for a certain region of the parameter space of the solution.

  17. Differential geometry of the ruled surfaces optically generated by mirror scanning devices: II. Generation of helicoids and hyperbolic paraboloids.

    Science.gov (United States)

    Li, Yajun

    2011-06-01

    The theory developed in Part I of this study [Y. Li, "Differential geometry of the ruled surfaces optically generated by mirror-scanning devices. I. Intrinsic and extrinsic properties of the scan field," J. Opt. Soc. Am. A28, 667 (2011)] for the ruled surfaces optically generated by single-mirror scanning devices is extended to multimirror scanning systems for an investigation of optical generation of the well-known ruled surfaces, such as helicoid, Plücker's conoid, and hyperbolic paraboloid.

  18. Geometric constraints on the space of N=2 SCFTs II: Construction of special K\\"ahler geometries and RG flows

    CERN Document Server

    Argyres, Philip C; Lü, Yongchao; Martone, Mario

    2016-01-01

    This is the second in a series of three papers on systematic analysis of rank 1 Coulomb branch geometries of four dimensional N=2 SCFTs. In \\cite{Argyres:2015ffa} we developed a strategy for classifying physical rank-1 CB geometries of N=2 SCFTs. Here we show how to carry out this strategy computationally to construct the Seiberg-Witten curves and one-forms for all the rank-1 SCFTs. Explicit expressions are given for all cases, with the exception of the Nf=4 SU(2) gauge theory and the En SCFTs which were constructed in \\cite{Seiberg:1994rs,Seiberg:1994aj} and \\cite{Minahan:1996fg,Minahan:1996cj}. Our classification includes all known rank-1 theories plus a new one with an abelian flavor group, plus nine additional theories whose existence is more speculative. Four of those, reported in \\cite{Argyres:2015ffa}, depend on the assumption of new frozen rank-1 SCFTs. Here we also also show that the assumption of the existence of certain rank-0 N=2 SCFTs leads to five additional consistent rank-1 CB geometries.

  19. Three-dimensional Explosion Geometry of Stripped-envelope Core-collapse Supernovae. II. Modeling of Polarization

    Science.gov (United States)

    Tanaka, Masaomi; Maeda, Keiichi; Mazzali, Paolo A.; Kawabata, Koji S.; Nomoto, Ken’ichi

    2017-03-01

    We present modeling of line polarization to study the multidimensional geometry of stripped-envelope core-collapse supernovae (SNe). We demonstrate that a purely axisymmetric, two-dimensional (2D) geometry cannot reproduce a loop in the Stokes Q ‑ U diagram, that is, a variation of the polarization angles along the velocities associated with the absorption lines. On the contrary, three-dimensional (3D) clumpy structures naturally reproduce the loop. The fact that the loop is commonly observed in stripped-envelope SNe suggests that SN ejecta generally have a 3D structure. We study the degree of line polarization as a function of the absorption depth for various 3D clumpy models with different clump sizes and covering factors. A comparison between the calculated and observed degree of line polarization indicates that a typical size of the clump is relatively large, ≳25% of the photospheric radius. Such large-scale clumps are similar to those observed in the SN remnant Cassiopeia A. Given the small size of the observed sample, the covering factor of the clumps is only weakly constrained (∼5%–80%). The presence of a large-scale clumpy structure suggests that the large-scale convection or standing accretion shock instability takes place at the onset of the explosion.

  20. H II regions, infrared dark molecular clouds and the local geometry of the Milky Way's nuclear star-forming ring

    CERN Document Server

    Liszt, H S

    2009-01-01

    To interpret the galactic center H II region complexes as constituents of a barred galaxy's nuclear star-forming ring, we compare 18cm VLA radiocontinuumm, $8-22\\mu$ MSX IR and 2.6mm BTL and ARO12m CO emission in the inner few hundred pc. Galactic center H II regions are comparable in their IR appearance, luminosity and SED to M17 or N!0, but the IR light distribution is strongly modified by extinction at 8-22$\\mu$, locally and overall. In Sgr B2 at $l > 0.6$\\degr strong radio H II regions are invisible in the IR. In two favorable cases, extinction from individual galactic center molecular clouds is shown to have $\\tau \\ga 1$ at 8-22$\\mu$ independent of wavelength. The gas kinematics are mostly rotational but with systematic $\\pm 30-50$ \\kms non-circular motion. Sgr B and C both show the same shell and high-velocity cap structure. The H II regions lie in a slightly-inclined ring of radius $\\approx$ 180 pc (1.2\\degr) whose near side appears at higher latitude and lower velocity and contains Sgr B. Sgr C is on ...

  1. Influence of Discharge Parameters on Tuned Substrate Self-Bias in an Radio-Frequency Inductively Coupled Plasma

    Institute of Scientific and Technical Information of China (English)

    Ding Zhenfeng; Sun Jingchao; Wang Younian

    2005-01-01

    The tuned substrate self-bias in an rf inductively coupled plasma source is controlled by means of varying the impedance of an external LC network inserted between the substrate and the ground. The influencing parameters such as the substrate axial position, different coupling coils and inserted resistance are experimentally studied. To get a better understanding of the experimental results, the axial distributions of the plasma density, electron temperature and plasma potential are measured with an rf compensated Langmuir probe; the coil rf peak-to-peak voltage is measured with a high voltage probe. As in the case of changing discharge power, it is found that continuity, instability and bi-stability of the tuned substrate bias can be obtained by means of changing the substrate axial position in the plasma source or the inserted resistance. Additionally,continuity can not transit directly into bi-stability, but evolves via instability. The inductance of the coupling coil has a substantial effect on the magnitude and the property of the tuned substrate bias.

  2. Pyrone-based Cu(II) complexes, their characterization, DFT based conformational drift from square planar to square pyramidal geometry and biological activities

    Indian Academy of Sciences (India)

    Pradeep Kumar Vishwakarma; Jan Mohammad Mir; Ram Charitra Maurya

    2016-04-01

    This work deals with the synthesis and characterization of a series of three -Dehydroacetic acid- 4-phenyl-3-thiosemicarbazide (H2dha-ptsc) Schiff base Cu(II) complexes based on combined experimental and theoretical approach, having the general composition formula as [Cu(dha-ptsc)(L-L)], where L-L is H2O, 2,2-bipyridine (bipy) or 1,10-phenanthroline (phen). H2O containing complex acts as origin for the latter two complexes and in due course, the geometry of the complex changes from square planar to square pyramidal. DFT calculations were carried out for both the geometrical forms. B3LYP/LANL2DZ level of theory was used to carry out the required computations. From the overall DFT computations, square pyramidal geometry was found to be more stable as compared to the square planar conformation for the complexes under investigation. Super oxide dismutation, thermal behaviour and electrochemical activity were also studied. The results have shown satisfactory super oxide scavenging potential, high degree of thermal resistance and efficient redox properties for the title complexes. Moreover, charge analysis and nonlinear optical properties were computed to establish a comprehensive note of atomic constituents differing in nature of charge delocalization.

  3. Spread of excitation in 3-D models of the anisotropic cardiac tissue. II. Effects of fiber architecture and ventricular geometry.

    Science.gov (United States)

    Franzone, P C; Guerri, L; Pennacchio, M; Taccardi, B

    1998-01-15

    We investigate a three-dimensional macroscopic model of wave-front propagation related to the excitation process in the left ventricular wall represented by an anisotropic bidomain. The whole left ventricle is modeled, whereas, in a previous paper, only a flat slab of myocardial tissue was considered. The direction of cardiac fibers, which affects the anisotropic conductivity of the myocardium, rotates from the epi- to the endocardium. If the ventricular wall is conceived as a set of packed surfaces, the fibers may be tangent to them or more generally may cross them obliquely; the latter case is described by an "imbrication angle." The effect of a simplified Purkinje network also is investigated. The cardiac excitation process, more particularly the depolarization phase, is modeled by a nonlinear elliptic equation, called an eikonal equation, in the activation time. The numerical solution of this equation is obtained by means of the finite element method, which includes an upwind treatment of the Hamiltonian part of the equation. By means of numerical simulations in an idealized model of the left ventricle, we try to establish whether the eikonal approach contains the essential basic elements for predicting the features of the activation patterns experimentally observed. We discuss and compare these results with those obtained in our previous papers for a flat part of myocardium. The general rules governing the spread of excitation after local stimulations, previously delineated for the flat geometry, are extended to the present, more realistic monoventricular model.

  4. Material laws and related uncommon phenomena in the electromagnetic response of type-II superconductors in longitudinal geometry

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, H S; BadIa-Majos, A [Departamento de Fisica de la Materia Condensada and Instituto de Ciencia de Materiales de Aragon (ICMA), Universidad de Zaragoza-CSIC, MarIa de Luna 3, E-50018 Zaragoza (Spain); Lopez, C, E-mail: hsruizr@unizar.es [Departamento de Matematicas, Universidad de Alcala de Henares, E-28871 Alcala de Henares (Spain)

    2011-11-15

    Relying on our theoretical approach for the superconducting critical state problem in 3D magnetic field configurations, we present an exhaustive analysis of the electrodynamic response for the so-called longitudinal transport problem in the slab geometry. A wide set of experimental conditions have been considered, including modulation of the applied magnetic field either perpendicular or parallel (longitudinal) to the transport current density. The main objective of our work was to characterize the role of the macroscopic material law that should properly account for the underlying mechanisms of flux cutting and depinning. The intriguing occurrence of negative current patterns and the enhancement of the transport current flow along the center of the superconducting sample are reproduced as a straightforward consequence of the magnetically induced internal anisotropy. Moreover, we show that, related to a maximal projection of the current density vector onto the local magnetic field, a maximal transport current density occurs somewhere within the sample. The elusive measurement of the flux cutting threshold (critical value of such parallel component J{sub c||}) is suggested on the basis of local measurements of the transport current density. Finally, we show that a high correlation exists between the evolution of the transport current density and the appearance of paramagnetic peak structures in terms of the applied longitudinal magnetic field.

  5. Scalar field as an intrinsic time measure in coupled dynamical matter-geometry systems. II. Electrically charged gravitational collapse

    CERN Document Server

    Nakonieczna, Anna

    2016-01-01

    Investigating the dynamics of gravitational systems, especially in the regime of quantum gravity, poses a problem of measuring time during the evolution. One of the approaches to this issue is using one of the internal degrees of freedom as a time variable. The objective of our research was to check whether a scalar field or any other dynamical quantity being a part of a coupled multi-component matter-geometry system can be treated as a `clock' during its evolution. We investigated a collapse of a self-gravitating electrically charged scalar field in the Einstein and Brans-Dicke theories using the 2+2 formalism. Our findings concentrated on the spacetime region of high curvature existing in the vicinity of the emerging singularity, which is essential for the quantum gravity applications. We investigated several values of the Brans-Dicke coupling constant and the coupling between the Brans-Dicke and the electrically charged scalar fields. It turned out that both evolving scalar fields and a function which meas...

  6. Generalised Geometry and Flux Vacua

    CERN Document Server

    Larfors, Magdalena

    2015-01-01

    This note discusses the connection between generalised geometry and flux compactifications of string theory. Firstly, we explain in a pedestrian manner how the supersymmetry constraints of type II ${\\mathcal{N}}=1$ flux compactifications can be restated as integrability constraints on certain generalised complex structures. This reformulation uses generalised complex geometry, a mathematical framework that geometrizes the B-field. Secondly, we discuss how exceptional generalised geometry may provide a similar geometrization of the RR fields. Thirdly, we examine the connection between generalised geometry and non-geometry, and finally we present recent developments where generalised geometry is used to construct explicit examples of flux compactifications to flat space.

  7. Twistor geometry

    NARCIS (Netherlands)

    van den Broek, P.M.

    1984-01-01

    The aim of this paper is to give a detailed exposition of the relation between the geometry of twistor space and the geometry of Minkowski space. The paper has a didactical purpose; no use has been made of differential geometry and cohomology.

  8. Bianisotropic-critical-state model to study flux cutting in type-II superconductors at parallel geometry

    Science.gov (United States)

    Romero-Salazar, C.

    2016-04-01

    A critical-state model is postulated that incorporates, for the first time, the structural anisotropy and flux-line cutting effect in a type-II superconductor. The model is constructed starting from the theoretical scheme of Romero-Salazar and Pérez-Rodríguez to study the anisotropy induced by flux cutting. Here, numerical calculations of the magnetic induction and static magnetization are presented for samples under an alternating magnetic field, orthogonal to a static dc-bias one. The interplay of the two anisotropies is analysed by comparing the numerical results with available experimental data for an yttrium barium copper oxide (YBCO) plate, and a vanadium-titanium (VTi) strip, subjected to a slowly oscillating field {H}y({H}z) in the presence of a static field {H}z({H}y).

  9. Differential geometry

    CERN Document Server

    Guggenheimer, Heinrich W

    1977-01-01

    This is a text of local differential geometry considered as an application of advanced calculus and linear algebra. The discussion is designed for advanced undergraduate or beginning graduate study, and presumes of readers only a fair knowledge of matrix algebra and of advanced calculus of functions of several real variables. The author, who is a Professor of Mathematics at the Polytechnic Institute of New York, begins with a discussion of plane geometry and then treats the local theory of Lie groups and transformation groups, solid differential geometry, and Riemannian geometry, leading to a

  10. Molecular geometry

    CERN Document Server

    Rodger, Alison

    1995-01-01

    Molecular Geometry discusses topics relevant to the arrangement of atoms. The book is comprised of seven chapters that tackle several areas of molecular geometry. Chapter 1 reviews the definition and determination of molecular geometry, while Chapter 2 discusses the unified view of stereochemistry and stereochemical changes. Chapter 3 covers the geometry of molecules of second row atoms, and Chapter 4 deals with the main group elements beyond the second row. The book also talks about the complexes of transition metals and f-block elements, and then covers the organometallic compounds and trans

  11. Optimizing a neutron-beam focusing device for the direct geometry time-of-flight spectrometer TOFTOF at the FRM II reactor source

    Science.gov (United States)

    Rasmussen, N. G.; Simeoni, G. G.; Lefmann, K.

    2016-04-01

    A dedicated beam-focusing device has been designed for the direct geometry thermal-cold neutron time-of-flight spectrometer TOFTOF at the neutron facility FRM II (Garching, Germany). The prototype, based on the compressed Archimedes' mirror concept, benefits from the adaptive-optics technology (adjustable supermirror curvature) and the compact size (only 0.5 m long). We have simulated the neutron transport across the entire guide system. We present a detailed computer characterization of the existing device, along with the study of the factors mostly influencing the future improvement. We have optimized the simulated prototype as a function of the neutron wavelength, accounting also for all relevant features of a real instrument like the non-reflecting side edges. The results confirm the "chromatic" displacement of the focal point (flux density maximum) at fixed supermirror curvature, and the ability of a variable curvature to keep the focal point at the sample position. Our simulations are in excellent agreement with theoretical predictions and the experimentally measured beam profile. With respect to the possibility of a further upgrade, we find that supermirror coatings with m-values higher than 3.5 would have only marginal influence on the optimal behaviour, whereas comparable spectrometers could take advantage of longer focusing segments, with particular impact for the thermal region of the neutron spectrum.

  12. Optimizing a neutron-beam focusing device for the direct geometry time-of-flight spectrometer TOFTOF at the FRM II reactor source

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, N.G. [Nanoscience Center, Niels Bohr Institute, University of Copenhagen, Universitetsparken 5, DK-2100 Copenhagen Ø (Denmark); Simeoni, G.G., E-mail: ggsimeoni@outlook.com [Heinz Maier-Leibnitz Zentrum (MLZ) and Physics Department, Technical University of Munich, D-85748 Garching (Germany); Lefmann, K. [Nanoscience Center, Niels Bohr Institute, University of Copenhagen, Universitetsparken 5, DK-2100 Copenhagen Ø (Denmark)

    2016-04-21

    A dedicated beam-focusing device has been designed for the direct geometry thermal-cold neutron time-of-flight spectrometer TOFTOF at the neutron facility FRM II (Garching, Germany). The prototype, based on the compressed Archimedes' mirror concept, benefits from the adaptive-optics technology (adjustable supermirror curvature) and the compact size (only 0.5 m long). We have simulated the neutron transport across the entire guide system. We present a detailed computer characterization of the existing device, along with the study of the factors mostly influencing the future improvement. We have optimized the simulated prototype as a function of the neutron wavelength, accounting also for all relevant features of a real instrument like the non-reflecting side edges. The results confirm the “chromatic” displacement of the focal point (flux density maximum) at fixed supermirror curvature, and the ability of a variable curvature to keep the focal point at the sample position. Our simulations are in excellent agreement with theoretical predictions and the experimentally measured beam profile. With respect to the possibility of a further upgrade, we find that supermirror coatings with m-values higher than 3.5 would have only marginal influence on the optimal behaviour, whereas comparable spectrometers could take advantage of longer focusing segments, with particular impact for the thermal region of the neutron spectrum.

  13. Klein geometries, parabolic geometries and differential equations of finite type

    CERN Document Server

    Abadoglu, Ender

    2009-01-01

    We define the infinitesimal and geometric orders of an effective Klein geometry G/H. Using these concepts, we prove i) For any integer m>1, there exists an effective Klein geometry G/H of infinitesimal order m such that G/H is a projective variety (Corollary 9). ii) An effective Klein geometry G/H of geometric order M defines a differential equation of order M+1 on G/H whose global solution space is G (Proposition 18).

  14. Architectural geometry

    KAUST Repository

    Pottmann, Helmut

    2014-11-26

    Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural geometry, meanwhile contains a great wealth of individual contributions which are relevant in various fields. For mathematicians, the relation to discrete differential geometry is significant, in particular the integrable system viewpoint. Besides, new application contexts have become available for quite some old-established concepts. Regarding graphics and geometry processing, architectural geometry yields interesting new questions but also new objects, e.g. replacing meshes by other combinatorial arrangements. Numerical optimization plays a major role but in itself would be powerless without geometric understanding. Summing up, architectural geometry has become a rewarding field of study. We here survey the main directions which have been pursued, we show real projects where geometric considerations have played a role, and we outline open problems which we think are significant for the future development of both theory and practice of architectural geometry.

  15. Beautiful geometry

    CERN Document Server

    Maor, Eli

    2014-01-01

    If you've ever thought that mathematics and art don't mix, this stunning visual history of geometry will change your mind. As much a work of art as a book about mathematics, Beautiful Geometry presents more than sixty exquisite color plates illustrating a wide range of geometric patterns and theorems, accompanied by brief accounts of the fascinating history and people behind each. With artwork by Swiss artist Eugen Jost and text by acclaimed math historian Eli Maor, this unique celebration of geometry covers numerous subjects, from straightedge-and-compass constructions to intriguing configur

  16. Differential geometry

    CERN Document Server

    Graustein, William C

    2006-01-01

    This first course in differential geometry presents the fundamentals of the metric differential geometry of curves and surfaces in a Euclidean space of three dimensions. Written by an outstanding teacher and mathematician, it explains the material in the most effective way, using vector notation and technique. It also provides an introduction to the study of Riemannian geometry.Suitable for advanced undergraduates and graduate students, the text presupposes a knowledge of calculus. The first nine chapters focus on the theory, treating the basic properties of curves and surfaces, the mapping of

  17. Algebraic geometry

    CERN Document Server

    Lefschetz, Solomon

    2005-01-01

    An introduction to algebraic geometry and a bridge between its analytical-topological and algebraical aspects, this text for advanced undergraduate students is particularly relevant to those more familiar with analysis than algebra. 1953 edition.

  18. Information geometry

    CERN Document Server

    Ay, Nihat; Lê, Hông Vân; Schwachhöfer, Lorenz

    2017-01-01

    The book provides a comprehensive introduction and a novel mathematical foundation of the field of information geometry with complete proofs and detailed background material on measure theory, Riemannian geometry and Banach space theory. Parametrised measure models are defined as fundamental geometric objects, which can be both finite or infinite dimensional. Based on these models, canonical tensor fields are introduced and further studied, including the Fisher metric and the Amari-Chentsov tensor, and embeddings of statistical manifolds are investigated. This novel foundation then leads to application highlights, such as generalizations and extensions of the classical uniqueness result of Chentsov or the Cramér-Rao inequality. Additionally, several new application fields of information geometry are highlighted, for instance hierarchical and graphical models, complexity theory, population genetics, or Markov Chain Monte Carlo. The book will be of interest to mathematicians who are interested in geometry, inf...

  19. Subtracted geometry

    Science.gov (United States)

    Saleem, Zain Hamid

    In this thesis we study a special class of black hole geometries called subtracted geometries. Subtracted geometry black holes are obtained when one omits certain terms from the warp factor of the metric of general charged rotating black holes. The omission of these terms allows one to write the wave equation of the black hole in a completely separable way and one can explicitly see that the wave equation of a massless scalar field in this slightly altered background of a general multi-charged rotating black hole acquires an SL(2, R) x SL(2, R) x SO(3) symmetry. The "subtracted limit" is considered an appropriate limit for studying the internal structure of the non-subtracted black holes because new 'subtracted' black holes have the same horizon area and periodicity of the angular and time coordinates in the near horizon regions as the original black hole geometry it was constructed from. The new geometry is asymptotically conical and is physically similar to that of a black hole in an asymptotically confining box. We use the different nice properties of these geometries to understand various classically and quantum mechanically important features of general charged rotating black holes.

  20. Ultralow-quiescent-current and wide-load-range low-dropout linear regulator with self-biasing technique for micropower battery management

    Science.gov (United States)

    Ozaki, Toshihiro; Hirose, Tetsuya; Asano, Hiroki; Kuroki, Nobutaka; Numa, Masahiro

    2017-04-01

    In this paper, we present a 151 nA quiescent and 6.8 mA maximum-output-current low-dropout (LDO) linear regulator for micropower battery management. The LDO regulator employs self-biasing and multiple-stacked cascode techniques to achieve efficient, accurate, and high-voltage-input-tolerant operation. Measurement results demonstrated that the proposed LDO regulator operates with an ultralow quiescent current of 151 nA. The maximum output currents with a 4.16 V output were 1.0 and 6.8 mA when the input voltages were 4.25 and 5.0 V, respectively.

  1. Geometry Revealed

    CERN Document Server

    Berger, Marcel

    2010-01-01

    Both classical geometry and modern differential geometry have been active subjects of research throughout the 20th century and lie at the heart of many recent advances in mathematics and physics. The underlying motivating concept for the present book is that it offers readers the elements of a modern geometric culture by means of a whole series of visually appealing unsolved (or recently solved) problems that require the creation of concepts and tools of varying abstraction. Starting with such natural, classical objects as lines, planes, circles, spheres, polygons, polyhedra, curves, surfaces,

  2. Analytic geometry

    CERN Document Server

    Burdette, A C

    1971-01-01

    Analytic Geometry covers several fundamental aspects of analytic geometry needed for advanced subjects, including calculus.This book is composed of 12 chapters that review the principles, concepts, and analytic proofs of geometric theorems, families of lines, the normal equation of the line, and related matters. Other chapters highlight the application of graphing, foci, directrices, eccentricity, and conic-related topics. The remaining chapters deal with the concept polar and rectangular coordinates, surfaces and curves, and planes.This book will prove useful to undergraduate trigonometric st

  3. Vector geometry

    CERN Document Server

    Robinson, Gilbert de B

    2011-01-01

    This brief undergraduate-level text by a prominent Cambridge-educated mathematician explores the relationship between algebra and geometry. An elementary course in plane geometry is the sole requirement for Gilbert de B. Robinson's text, which is the result of several years of teaching and learning the most effective methods from discussions with students. Topics include lines and planes, determinants and linear equations, matrices, groups and linear transformations, and vectors and vector spaces. Additional subjects range from conics and quadrics to homogeneous coordinates and projective geom

  4. Analytical description of the injection ratio of self-biased bipolar transistors under the very high injection conditions of ESD events

    Science.gov (United States)

    Gendron, A.; Renaud, P.; Bafleur, M.; Nolhier, N.

    2008-05-01

    This paper proposes a 1D-analytical description of the injection ratio of a self-biased bipolar transistor under very high current injection conditions. Starting from an expression of the current gain based on the stored charge into the emitter and base regions, we derive a new analytical expression of the current injection ratio. This analytical description demonstrates the presence of an asymptotic limit for the injection ratio at very high current densities, as the ratio of electron/hole mobilities in the case of an NPN transistor and to the ratio of hole/electron saturation velocities for a PNP. Moreover, for the first time, a base narrowing effect is demonstrated and explained in the case of a self-biased PNP, in contrast with the base widening effect (Kirk effect [Kirk CT, A theory of transistor cutoff frequency (fT) falloff at high current densities, IRE Trans Electr Dev 1961: p. 164-73]) reported for lower current density. These results are validated by numerical simulation and show a good agreement with experimental characterizations of transistors especially designed to operate under extreme condition such as electrostatic discharge (ESD) events.

  5. Architectural geometry

    NARCIS (Netherlands)

    Pottmann, Helmut; Eigensatz, Michael; Vaxman, A.; Wallner, Johannes

    2015-01-01

    Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural

  6. Architectural geometry

    NARCIS (Netherlands)

    Pottmann, Helmut; Eigensatz, Michael; Vaxman, A.; Wallner, Johannes

    2015-01-01

    Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural

  7. Riemannian geometry

    CERN Document Server

    Petersen, Peter

    2016-01-01

    Intended for a one year course, this text serves as a single source, introducing readers to the important techniques and theorems, while also containing enough background on advanced topics to appeal to those students wishing to specialize in Riemannian geometry. This is one of the few Works to combine both the geometric parts of Riemannian geometry and the analytic aspects of the theory. The book will appeal to a readership that have a basic knowledge of standard manifold theory, including tensors, forms, and Lie groups. Important revisions to the third edition include: a substantial addition of unique and enriching exercises scattered throughout the text; inclusion of an increased number of coordinate calculations of connection and curvature; addition of general formulas for curvature on Lie Groups and submersions; integration of variational calculus into the text allowing for an early treatment of the Sphere theorem using a proof by Berger; incorporation of several recent results about manifolds with posit...

  8. Differential geometry

    CERN Document Server

    Kreyszig, Erwin

    1991-01-01

    An introductory textbook on the differential geometry of curves and surfaces in three-dimensional Euclidean space, presented in its simplest, most essential form, but with many explanatory details, figures and examples, and in a manner that conveys the theoretical and practical importance of the different concepts, methods and results involved. With problems at the end of each section, and solutions listed at the end of the book. Includes 99 illustrations.

  9. General Geometry and Geometry of Electromagnetism

    OpenAIRE

    Shahverdiyev, Shervgi S.

    2002-01-01

    It is shown that Electromagnetism creates geometry different from Riemannian geometry. General geometry including Riemannian geometry as a special case is constructed. It is proven that the most simplest special case of General Geometry is geometry underlying Electromagnetism. Action for electromagnetic field and Maxwell equations are derived from curvature function of geometry underlying Electromagnetism. And it is shown that equation of motion for a particle interacting with electromagnetic...

  10. Temperature dependence of the crystal structure and g-values of trans-diaquabis(methoxyacetato)copper(II): evidence for a thermal equilibrium between complexes with tetragonally elongated and compressed geometries.

    Science.gov (United States)

    Simmons, Charles J; Stratemeier, Horst; Hitchman, Michael A; Reinen, Dirk; Masters, Vanessa M; Riley, Mark J

    2011-06-06

    The crystal structures of trans-diaquabis(methoxyacetato)copper(II) and the isostructural nickel(II) complex have been determined over a wide temperature range. In conjunction with the reported behavior of the g-values, the structural data suggest that the copper(II) compound exhibits a thermal equilibrium between three structural forms, two having orthorhombically distorted, tetragonally elongated geometries but with the long and intermediate bonds to different atoms, and the third with a tetragonally compressed geometry. This is apparently the first reported example of a copper(II) complex undergoing an equilibrium between tetragonally elongated and compressed forms. The optical spectrum of single crystals of the copper(II) compound is used to obtain metal-ligand bonding parameters which yield the g-values of the compressed form of the complex and hence the proportions of the complex in each structural form at every temperature. When combined with estimates of the Jahn-Teller distortions of the different forms, the latter produce excellent agreement with the observed temperature dependence of the bond lengths. The behavior of an infrared combination band is consistent with such a thermal equilibrium, as is the temperature dependence of the thermal ellipsoid parameters and the XAFS. The potential surfaces of the different forms of the copper(II) complex have been calculated by a model based upon Jahn-Teller coupling. It is suggested that cooperative effects may cause the development of the population of tetragonally compressed complexes, and the crystal packing is consistent with this hypothesis, though the present model may oversimplify the diversity of structural forms present at high temperature. © 2011 American Chemical Society

  11. Differential geometry

    CERN Document Server

    Ciarlet, Philippe G

    2007-01-01

    This book gives the basic notions of differential geometry, such as the metric tensor, the Riemann curvature tensor, the fundamental forms of a surface, covariant derivatives, and the fundamental theorem of surface theory in a selfcontained and accessible manner. Although the field is often considered a classical one, it has recently been rejuvenated, thanks to the manifold applications where it plays an essential role. The book presents some important applications to shells, such as the theory of linearly and nonlinearly elastic shells, the implementation of numerical methods for shells, and

  12. Electronic spectra of 2- and 3-tolunitrile in the gas phase. II. Geometry changes from Franck-Condon fits of fluorescence emission spectra

    Science.gov (United States)

    Gmerek, Felix; Stuhlmann, Benjamin; Álvarez-Valtierra, Leonardo; Pratt, David W.; Schmitt, Michael

    2016-02-01

    We determined the changes of the geometries of 2- and 3-tolunitrile upon excitation to the lowest excited singlet states from Franck-Condon fits of the vibronic intensities in several fluorescence emission spectra and of the rotational constant changes upon excitation. These structural changes can be connected to the altered electron distribution in the molecules and are compared to the results of ab initio calculations. We show how the torsional barriers of the methyl groups in both components are used as probe of the molecular changes upon electronic excitation.

  13. Mechanisms of suppressing secondary nucleation for low-power and low-temperature microwave plasma self-bias-enhanced growth of diamond films in argon diluted methane

    Directory of Open Access Journals (Sweden)

    Ji-heng Jiang

    2011-12-01

    Full Text Available We report on mechanisms for suppressing diamond secondary nucleation in microwave plasma self-bias-enhanced growth (SBEG of diamond films in methane diluted by argon. High-density plasma at a small distance from the substrate induces a floating potential which promotes high-flux, low-energy ion bombardment on diamond growing surfaces along with an equal flux of electrons. Increased atomic hydrogen generated by electron impact dissociation of methane and low-energy ion bombardment help remove hydrocarbon coatings on diamond grains in favor of continuous grain growth and, therefore, the suppression of secondary diamond nucleation. Energetic meta-stable excited argon, abundant C2 dimers, and enhanced effective surface temperature due to low-energy ion bombardment further promote the diamond grain growth resulting in the deposition of a diamond film with columnar diamond grains of much larger grain sizes and a much lower density of grain boundaries than ultrananocrystalline diamond (UNCD films grown under similar conditions without optimized plasma-substrate interactions. SEM, XRD, PL, and Raman scattering help confirm the deposition of diamond films with columnar grains.

  14. Preparation and Magnetic Properties of SrFe12O19 Ferrites Suitable for Use in Self-Biased LTCC Circulators

    Science.gov (United States)

    Peng, Long; Hu, Yue-Bin; Guo, Cheng; Li, Le-Zhong; Wang, Rui; Hu, Yun; Tu, Xiao-Qiang

    2015-01-01

    Strontium ferrites with different Bi2O3 content are prepared by the solid phase method, and their magnetic properties are investigated primarily. The Bi2O3 additive and sintering temperature separately exhibit a strong effect on the sintering density, crystal structure, and magnetic properties of the ferrites. As to the ferrites with 3 wt% Bi2O3, the relatively high sintering density ρs, saturation magnetization Ms, and intrinsic coercivity Hci can be obtained at a low sintering temperature of 900°C even much lower. Furthermore, the effective magnetic anisotropy constant Keff and magnetic anisotropy field Ha of the ferrites are calculated from the magnetization curve by the law of approach to saturation. It is suggested that the low-temperature sintered SrFe12O19 ferrites with Ms of 285.6 kA/m and Ha of 1564.6 kA/m possess a significant potentiality for applying in the self-biased low-temperature co-fired ceramics circulators from 34 to 40 GHz.

  15. Geometry and bond-length alternation in nonlinear optical materials. II. Effects of donor strength in two push-pull molecules.

    Science.gov (United States)

    Gainsford, Graeme J; Bhuiyan, M Delower H; Kay, Andrew J

    2008-04-01

    The compounds N-[2-(4-cyano-5-dicyanomethylene-2,2-dimethyl-2,5-dihydrofuran-3-yl)vinyl]-N-phenylacetamide, C(20)H(16)N(4)O(2), (I), and 2-{3-cyano-5,5-dimethyl-4-[2-(piperidin-1-yl)vinyl]-2,5-dihydrofuran-2-ylidene}malononitrile 0.376-hydrate, C(17)H(18)N(4)O x 0.376 H(2)O, (II), are novel push-pull molecules. The significant bonding changes in the polyene chain compared with the parent molecule 2-dicyanomethylene-4,5,5-trimethyl-2,5-dihyrofuran-3-carbonitrile are consistent with the relative electron-donating properties of the acetanilido and piperidine groups. The packing of (I) utilizes one phenyl-cyano C-H...N and two phenyl-carbonyl C-H...O hydrogen bonds. Compound (II) crystallizes with a partial water molecule (0.376H(2)O), consistent with cell packing that is dominated by attractive C-H...N(cyano) interactions. These compounds are precursors to novel nonlinear optical chromophores, studied to assess the impact of donor strength and the extent of conjugation on bond-length alternation, crystal packing and aggregation.

  16. Surface complexation and precipitate geometry for aqueous Zn(II) sorption on ferrihydrite I: X-ray absorption extended fine structure spectroscopy analysis

    Science.gov (United States)

    Waychunas, G.A.; Fuller, C.C.; Davis, J.A.

    2002-01-01

    "Two-line" ferrihydrite samples precipitated and then exposed to a range of aqueous Zn solutions (10-5 to 10-3 M), and also coprecipitated in similar Zn solutions (pH 6.5), have been examined by Zn and Fe K-edge X-ray absorption spectroscopy. Typical Zn complexes on the surface have Zn-O distances of 1.97(0.2) A?? and coordination numbers of about 4.0(0.5), consistent with tetrahedral oxygen coordination. This contrasts with Zn-O distances of 2.11(.02) A?? and coordination numbers of 6 to 7 in the aqueous Zn solutions used in sample preparation. X-ray absorption extended fine structure spectroscopy (EXAFS) fits to the second shell of cation neighbors indicate as many as 4 Zn-Fe neighbors at 3.44(.04) A?? in coprecipitated samples, and about two Zn-Fe neighbors at the same distance in adsorption samples. In both sets of samples, the fitted coordination number of second shell cations decreases as sorption density increases, indicating changes in the number and type of available complexing sites or the onset of competitive precipitation processes. Comparison of our results with the possible geometries for surface complexes and precipitates suggests that the Zn sorption complexes are inner sphere and at lowest adsorption densities are bidentate, sharing apical oxygens with adjacent edge-sharing Fe(O,OH)6 octahedra. Coprecipitation samples have complexes with similar geometry, but these are polydentate, sharing apices with more than two adjacent edge-sharing Fe(O,OH)6 polyhedra. The results are inconsistent with Zn entering the ferrihydrite structure (i.e., solid solution formation) or formation of other Zn-Fe precipitates. The fitted Zn-Fe coordination numbers drop with increasing Zn density with a minimum of about 0.8(.2) at Zn/(Zn + Fe) of 0.08 or more. This change appears to be attributable to the onset of precipitation of zinc hydroxide polymers with mainly tetrahedral Zn coordination. At the highest loadings studied, the nature of the complexes changes further

  17. Global Differential Geometry

    CERN Document Server

    Bär, Christian; Schwarz, Matthias

    2012-01-01

    This volume contains a collection of well-written surveys provided by experts in Global Differential Geometry to give an overview over recent developments in Riemannian Geometry, Geometric Analysis and Symplectic Geometry. The papers are written for graduate students and researchers with a general interest in geometry, who want to get acquainted with the current trends in these central fields of modern mathematics.

  18. Geometry in Medias Res

    Science.gov (United States)

    Cukier, Mimi; Asdourian, Tony; Thakker, Anand

    2012-01-01

    Geometry provides a natural window into what it is like to do mathematics. In the world of geometry, playful experimentation is often more fruitful than following a procedure, and logic plus a few axioms can open new worlds. Nonetheless, teaching a geometry course in a way that combines both rigor and play can be difficult. Many geometry courses…

  19. Geometry and bond-length alternation in nonlinear optical materials. III. Structural parameters of two chromophores containing aromatizable donorsPart II: Gainsford, Bhuiyan & Kay (2008a).

    Science.gov (United States)

    Gainsford, Graeme J; Bhuiyan, M Delower H; Kay, Andrew J

    2008-11-01

    The planar component of 2-{3-cyano-4-[3-(1-decyl-1,4-dihydroquinolin-4-ylidene)prop-1-enyl]-5,5-dimethyl-2,5-dihydrofuran-2-ylidene}malononitrile, C(32)H(46)N(4)O, (I), forms into layers parallel to the (\\overline{1}01) plane. The larger of the two spaces between layers is filled by the alkyl chains, giving a ;sandwich stack' appearance. The packing of 2-{3-cyano-4-[5-(1-decyl-1,4-dihydroquinolin-4-ylidene)penta-1,3-dienyl]-5,5-dimethyl-2,5-dihydrofuran-2-ylidene}malononitrile, C(34)H(38)N(4)O, (II), which has partial disorder in the 1-decyl group, utilizes weak C-H...N, C-H...O and C-N...pi interactions in a three-dimensional ;herring-bone' array with molecular segments parallel to the (111) and (\\overline{1}1\\overline{1}) planes. Different rotational isomers with respect to the polyene chain and the 5,5-dimethyl-2,5-dihydrofuran-2-ylidene link are observed in the two structures. The significance of the study lies in the delocalization of charge along the polyene chain and the supramolecular aggregation present, which highlight the difficulty in obtaining the noncentrosymmetric alignment required for high nonlinear optical (NLO) responses in zwitterionic chromophores.

  20. Flexible Solar Cells Using Doped Crystalline Si Film Prepared by Self-Biased Sputtering Solid Doping Source in SiCl4/H2 Microwave Plasma.

    Science.gov (United States)

    Hsieh, Ping-Yen; Lee, Chi-Young; Tai, Nyan-Hwa

    2016-02-01

    We developed an innovative approach of self-biased sputtering solid doping source process to synthesize doped crystalline Si film on flexible polyimide (PI) substrate via microwave-plasma-enhanced chemical vapor deposition (MWPECVD) using SiCl4/H2 mixture. In this process, P dopants or B dopants were introduced by sputtering the solid doping target through charged-ion bombardment in situ during high-density microwave plasma deposition. A strong correlation between the number of solid doping targets and the characteristics of doped Si films was investigated in detail. The results show that both P- and B-doped crystalline Si films possessed a dense columnar structure, and the crystallinity of these structures decreased with increasing the number of solid doping targets. The films also exhibited a high growth rate (>4.0 nm/s). Under optimal conditions, the maximum conductivity and corresponding carrier concentration were, respectively, 9.48 S/cm and 1.2 × 10(20) cm(-3) for P-doped Si film and 7.83 S/cm and 1.5 × 10(20) cm(-3) for B-doped Si film. Such high values indicate that the incorporation of dopant with high doping efficiency (around 40%) into the Si films was achieved regardless of solid doping sources used. Furthermore, a flexible crystalline Si film solar cell with substrate configuration was fabricated by using the structure of PI/Mo film/n-type Si film/i-type Si film/p-type Si film/ITO film/Al grid film. The best solar cell performance was obtained with an open-circuit voltage of 0.54 V, short-circuit current density of 19.18 mA/cm(2), fill factor of 0.65, and high energy conversion of 6.75%. According to the results of bending tests, the critical radius of curvature (RC) was 12.4 mm, and the loss of efficiency was less than 1% after the cyclic bending test for 100 cycles at RC, indicating superior flexibility and bending durability. These results represent important steps toward a low-cost approach to high-performance flexible crystalline Si film

  1. Real Algebraic Geometry

    CERN Document Server

    Mahé, Louis; Roy, Marie-Françoise

    1992-01-01

    Ten years after the first Rennes international meeting on real algebraic geometry, the second one looked at the developments in the subject during the intervening decade - see the 6 survey papers listed below. Further contributions from the participants on recent research covered real algebra and geometry, topology of real algebraic varieties and 16thHilbert problem, classical algebraic geometry, techniques in real algebraic geometry, algorithms in real algebraic geometry, semialgebraic geometry, real analytic geometry. CONTENTS: Survey papers: M. Knebusch: Semialgebraic topology in the last ten years.- R. Parimala: Algebraic and topological invariants of real algebraic varieties.- Polotovskii, G.M.: On the classification of decomposing plane algebraic curves.- Scheiderer, C.: Real algebra and its applications to geometry in the last ten years: some major developments and results.- Shustin, E.L.: Topology of real plane algebraic curves.- Silhol, R.: Moduli problems in real algebraic geometry. Further contribu...

  2. Digital Differential Geometry Processing

    Institute of Scientific and Technical Information of China (English)

    Xin-Guo Liu; Hu-Jun Bao; Qun-Sheng Peng

    2006-01-01

    The theory and methods of digital geometry processing has been a hot research area in computer graphics, as geometric models serves as the core data for 3D graphics applications. The purpose of this paper is to introduce some recent advances in digital geometry processing, particularly mesh fairing, surface parameterization and mesh editing, that heavily use differential geometry quantities. Some related concepts from differential geometry, such as normal, curvature, gradient,Laplacian and their counterparts on digital geometry are also reviewed for understanding the strength and weakness of various digital geometry processing methods.

  3. Geometry and its applications

    CERN Document Server

    Meyer, Walter J

    2006-01-01

    Meyer''s Geometry and Its Applications, Second Edition, combines traditional geometry with current ideas to present a modern approach that is grounded in real-world applications. It balances the deductive approach with discovery learning, and introduces axiomatic, Euclidean geometry, non-Euclidean geometry, and transformational geometry. The text integrates applications and examples throughout and includes historical notes in many chapters. The Second Edition of Geometry and Its Applications is a significant text for any college or university that focuses on geometry''s usefulness in other disciplines. It is especially appropriate for engineering and science majors, as well as future mathematics teachers.* Realistic applications integrated throughout the text, including (but not limited to): - Symmetries of artistic patterns- Physics- Robotics- Computer vision- Computer graphics- Stability of architectural structures- Molecular biology- Medicine- Pattern recognition* Historical notes included in many chapters...

  4. Riemann-Finsler geometry

    Institute of Scientific and Technical Information of China (English)

    GUO Enli; MO Xiaohuan

    2006-01-01

    In this paper,a survey on Riemann-Finsler geometry is given.Non-trivial examples of Finsler metrics satisfying different curvature conditions are presented.Local and global results in Finsler geometry are analyzed.

  5. Enhanced ion anisotropy by nonconventional coordination geometry: single-chain magnet behavior for a [{Fe(II)L}2{Nb(IV)(CN)8}] helical chain compound designed with heptacoordinate Fe(II).

    Science.gov (United States)

    Venkatakrishnan, Thengarai S; Sahoo, Shaon; Bréfuel, Nicolas; Duhayon, Carine; Paulsen, Carley; Barra, Anne-Laure; Ramasesha, S; Sutter, Jean-Pascal

    2010-05-05

    Nonconventional heptacoordination in combination with efficient magnetic exchange coupling is shown to yield a 1-D heteronuclear {Fe(II)Nb(IV)} compound with remarkable magnetic features when compared to other Fe(II)-based single chain magnets (SCM). Cyano-bridged heterometallic {3d-4d} and {3d-5d} chains are formed upon assembling Fe(II) bearing a pentadentate macrocycle as the blocking ligand with octacyano metallates, [M(CN)(8)](4-) (M = Nb(IV), Mo(IV), W(IV)). X-ray diffraction (single-crystal and powder) measurements reveal that the [{(H(2)O)Fe(L(1))}{M(CN)(8)}{Fe(L(1))}](infinity) architectures consist of isomorphous 1-D polymeric structures based on the alternation of {Fe(L(1))}(2+) and {M(CN)(8)}(4-) units (L(1) stands for the pentadentate macrocycle). Analysis of the magnetic susceptibility behavior revealed cyano-bridged {Fe-Nb} exchange interaction to be antiferromagnetic with J = -20 cm(-1) deduced from fitting an Ising model taking into account the noncollinear spin arrangement. For this ferrimagnetic chain a slow relaxation of its magnetization is observed at low temperature revealing a SCM behavior with Delta/k(B) = 74 K and tau(0) = 4.6 x 10(-11) s. The M versus H behavior exhibits a hysteresis loop with a coercive field of 4 kOe at 1 K and reveals at 380 mK magnetic avalanche processes, i.e., abrupt reversals in magnetization as H is varied. The origin of these characteristics is attributed to the combination of efficient {Fe-Nb} exchange interaction and significant anisotropy of the {Fe(L(1))} unit. High field EPR and magnetization experiments have revealed for the parent compound [Fe(L(1))(H(2)O)(2)]Cl(2) a negative zero field splitting parameter of D approximately = -17 cm(-1). The crystal structure, magnetic behavior, and Mossbauer data for [Fe(L(1))(H(2)O)(2)]Cl(2) are also reported.

  6. Geometry essentials for dummies

    CERN Document Server

    Ryan, Mark

    2011-01-01

    Just the critical concepts you need to score high in geometry This practical, friendly guide focuses on critical concepts taught in a typical geometry course, from the properties of triangles, parallelograms, circles, and cylinders, to the skills and strategies you need to write geometry proofs. Geometry Essentials For Dummies is perfect for cramming or doing homework, or as a reference for parents helping kids study for exams. Get down to the basics - get a handle on the basics of geometry, from lines, segments, and angles, to vertices, altitudes, and diagonals Conque

  7. Introduction to projective geometry

    CERN Document Server

    Wylie, C R

    2008-01-01

    This lucid introductory text offers both an analytic and an axiomatic approach to plane projective geometry. The analytic treatment builds and expands upon students' familiarity with elementary plane analytic geometry and provides a well-motivated approach to projective geometry. Subsequent chapters explore Euclidean and non-Euclidean geometry as specializations of the projective plane, revealing the existence of an infinite number of geometries, each Euclidean in nature but characterized by a different set of distance- and angle-measurement formulas. Outstanding pedagogical features include w

  8. Affine and Projective Geometry

    CERN Document Server

    Bennett, M K

    1995-01-01

    An important new perspective on AFFINE AND PROJECTIVE GEOMETRY. This innovative book treats math majors and math education students to a fresh look at affine and projective geometry from algebraic, synthetic, and lattice theoretic points of view. Affine and Projective Geometry comes complete with ninety illustrations, and numerous examples and exercises, covering material for two semesters of upper-level undergraduate mathematics. The first part of the book deals with the correlation between synthetic geometry and linear algebra. In the second part, geometry is used to introduce lattice theory

  9. Symplectic geometries on supermanifolds

    CERN Document Server

    Lavrov, P M

    2007-01-01

    Extension of symplectic geometry on manifolds to the supersymmetric case is considered. In the even case it leads to the even symplectic geometry (or, equivalently, to the geometry on supermanifolds endowed with an non-degenerate Poisson bracket) or to the geometry on an even Fedosov supermanifolds. It is proven that in the odd case there are two different scalar symplectic structures (namely, an odd closed differential 2-form and the antibracket) which can be used for construction of different symplectic geometries on supermanifolds.

  10. Generalized Kahler geometry

    CERN Document Server

    Gualtieri, Marco

    2010-01-01

    Generalized Kahler geometry is the natural analogue of Kahler geometry, in the context of generalized complex geometry. Just as we may require a complex structure to be compatible with a Riemannian metric in a way which gives rise to a symplectic form, we may require a generalized complex structure to be compatible with a metric so that it defines a second generalized complex structure. We explore the fundamental aspects of this geometry, including its equivalence with the bi-Hermitian geometry on the target of a 2-dimensional sigma model with (2,2) supersymmetry, as well as the relation to holomorphic Dirac geometry and the resulting derived deformation theory. We also explore the analogy between pre-quantum line bundles and gerbes in the context of generalized Kahler geometry.

  11. Methods for euclidean geometry

    CERN Document Server

    Byer, Owen; Smeltzer, Deirdre L

    2010-01-01

    Euclidean plane geometry is one of the oldest and most beautiful topics in mathematics. Instead of carefully building geometries from axiom sets, this book uses a wealth of methods to solve problems in Euclidean geometry. Many of these methods arose where existing techniques proved inadequate. In several cases, the new ideas used in solving specific problems later developed into independent areas of mathematics. This book is primarily a geometry textbook, but studying geometry in this way will also develop students' appreciation of the subject and of mathematics as a whole. For instance, despite the fact that the analytic method has been part of mathematics for four centuries, it is rarely a tool a student considers using when faced with a geometry problem. Methods for Euclidean Geometry explores the application of a broad range of mathematical topics to the solution of Euclidean problems.

  12. Electrostatics in Periodic Slab Geometries II

    OpenAIRE

    de Joannis, Jason; Arnold, Axel; Holm, Christian

    2002-01-01

    In a previous paper a method was developed to subtract the interactions due to periodically replicated charges (or other long-range entities) in one spatial dimension. The method constitutes a generalized "electrostatic layer correction" (ELC) which adapts any standard 3D summation method to slab-like conditions. Here the implementation of the layer correction is considered in detail for the standard Ewald (EW3DLC) and the PPPM mesh Ewald (PPPMLC) methods. In particular this method offers a s...

  13. Derived Algebraic Geometry II: Noncommutative Algebra

    CERN Document Server

    Lurie, Jacob

    2007-01-01

    In this paper, we present an infinity-categorical version of the theory of monoidal categories. We show that the infinity category of spectra admits an essentially unique monoidal structure (such that the tensor product preserves colimits in each variable), and thereby recover the classical smash-product operation on spectra. We develop a general theory of algebras in a monoidal infinity category, which we use to (re)prove some basic results in the theory of associative ring spectra. We also develop an infinity-categorical theory of monads, and prove a version of the Barr-Beck theorem.

  14. A 3.2-GHz fully integrated low-phase noise CMOS VCO with self-biasing current source for the IEEE 802.11a/hiperLAN WLAN standard

    Science.gov (United States)

    Quemada, C.; Adin, I.; Bistue, G.; Berenguer, R.; Mendizabal, J.

    2005-06-01

    A 3.3V, fully integrated 3.2-GHz voltage-controlled oscillator (VCO) is designed in a 0.18μm CMOS technology for the IEE 802.11a/HiperLAN WLAN standard for the UNII band from 5.15 to 5.35 GHz. The VCO is tunable between 2.85 GHz and 3.31 GHz. NMOS architecture with self-biasing current of the tank source is chosen. A startup circuit has been employed to avoid zero initial current. Current variation is lower than 1% for voltage supply variations of 10%. The use of a self-biasing current source in the tank provides a greater safety in the transconductance value and allows running along more extreme point operation The designed VCO displays a phase noise and output power of -98dBc/Hz (at 100 KHz offset frequency) and 0dBm respectively. This phase noise has been obtained with inductors of 2.2nH and quality factor of 12 at 3.2 GHz, and P-N junction varactors whose quality factor is estimated to exceed 40 at 3.2 GHz. These passive components have been fabricated, measured and modeled previously. The core of the VCO consumes 33mW DC power.

  15. The Geometry Conference

    CERN Document Server

    Bárány, Imre; Vilcu, Costin

    2016-01-01

    This volume presents easy-to-understand yet surprising properties obtained using topological, geometric and graph theoretic tools in the areas covered by the Geometry Conference that took place in Mulhouse, France from September 7–11, 2014 in honour of Tudor Zamfirescu on the occasion of his 70th anniversary. The contributions address subjects in convexity and discrete geometry, in distance geometry or with geometrical flavor in combinatorics, graph theory or non-linear analysis. Written by top experts, these papers highlight the close connections between these fields, as well as ties to other domains of geometry and their reciprocal influence. They offer an overview on recent developments in geometry and its border with discrete mathematics, and provide answers to several open questions. The volume addresses a large audience in mathematics, including researchers and graduate students interested in geometry and geometrical problems.

  16. Generalised geometry for string corrections

    CERN Document Server

    Coimbra, André; Triendl, Hagen; Waldram, Daniel

    2014-01-01

    We present a general formalism for incorporating the string corrections in generalised geometry, which necessitates the extension of the generalised tangent bundle. Not only are such extensions obstructed, string symmetries and the existence of a well-defined effective action require a precise choice of the (generalised) connection. The action takes a universal form given by a generalised Lichnerowitz--Bismut theorem. As examples of this construction we discuss the corrections linear in $\\alpha'$ in heterotic strings and the absence of such corrections for type II theories.

  17. Algorithms in Algebraic Geometry

    CERN Document Server

    Dickenstein, Alicia; Sommese, Andrew J

    2008-01-01

    In the last decade, there has been a burgeoning of activity in the design and implementation of algorithms for algebraic geometric computation. Some of these algorithms were originally designed for abstract algebraic geometry, but now are of interest for use in applications and some of these algorithms were originally designed for applications, but now are of interest for use in abstract algebraic geometry. The workshop on Algorithms in Algebraic Geometry that was held in the framework of the IMA Annual Program Year in Applications of Algebraic Geometry by the Institute for Mathematics and Its

  18. Fundamental concepts of geometry

    CERN Document Server

    Meserve, Bruce E

    1983-01-01

    Demonstrates relationships between different types of geometry. Provides excellent overview of the foundations and historical evolution of geometrical concepts. Exercises (no solutions). Includes 98 illustrations.

  19. Revolutions of Geometry

    CERN Document Server

    O'Leary, Michael

    2010-01-01

    Guides readers through the development of geometry and basic proof writing using a historical approach to the topic. In an effort to fully appreciate the logic and structure of geometric proofs, Revolutions of Geometry places proofs into the context of geometry's history, helping readers to understand that proof writing is crucial to the job of a mathematician. Written for students and educators of mathematics alike, the book guides readers through the rich history and influential works, from ancient times to the present, behind the development of geometry. As a result, readers are successfull

  20. Euclidean geometry and transformations

    CERN Document Server

    Dodge, Clayton W

    1972-01-01

    This introduction to Euclidean geometry emphasizes transformations, particularly isometries and similarities. Suitable for undergraduate courses, it includes numerous examples, many with detailed answers. 1972 edition.

  1. Introduction to finite geometries

    CERN Document Server

    Kárteszi, F

    1976-01-01

    North-Holland Texts in Advanced Mathematics: Introduction to Finite Geometries focuses on the advancements in finite geometries, including mapping and combinatorics. The manuscript first offers information on the basic concepts on finite geometries and Galois geometries. Discussions focus on linear mapping of a given quadrangle onto another given quadrangle; point configurations of order 2 on a Galois plane of even order; canonical equation of curves of the second order on the Galois planes of even order; and set of collineations mapping a Galois plane onto itself. The text then ponders on geo

  2. Black Holes as Effective Geometries

    CERN Document Server

    Balasubramanian, Vijay; El-Showk, Sheer; Messamah, Ilies

    2008-01-01

    Gravitational entropy arises in string theory via coarse graining over an underlying space of microstates. In this review we would like to address the question of how the classical black hole geometry itself arises as an effective or approximate description of a pure state, in a closed string theory, which semiclassical observers are unable to distinguish from the "naive" geometry. In cases with enough supersymmetry it has been possible to explicitly construct these microstates in spacetime, and understand how coarse-graining of non-singular, horizon-free objects can lead to an effective description as an extremal black hole. We discuss how these results arise for examples in Type II string theory on AdS_5 x S^5 and on AdS_3 x S^3 x T^4 that preserve 16 and 8 supercharges respectively. For such a picture of black holes as effective geometries to extend to cases with finite horizon area the scale of quantum effects in gravity would have to extend well beyond the vicinity of the singularities in the effective t...

  3. Euclidean Geometry via Programming.

    Science.gov (United States)

    Filimonov, Rossen; Kreith, Kurt

    1992-01-01

    Describes the Plane Geometry System computer software developed at the Educational Computer Systems laboratory in Sofia, Bulgaria. The system enables students to use the concept of "algorithm" to correspond to the process of "deductive proof" in the development of plane geometry. Provides an example of the software's capability and compares it to…

  4. Supersymmetric Sigma Model Geometry

    OpenAIRE

    Ulf Lindström

    2012-01-01

    This is a review of how sigma models formulated in Superspace have become important tools for understanding geometry. Topics included are: The (hyper)k\\"ahler reduction; projective superspace; the generalized Legendre construction; generalized K\\"ahler geometry and constructions of hyperk\\"ahler metrics on Hermitean symmetric spaces.

  5. Geometry of multihadron production

    Energy Technology Data Exchange (ETDEWEB)

    Bjorken, J.D.

    1994-10-01

    This summary talk only reviews a small sample of topics featured at this symposium: Introduction; The Geometry and Geography of Phase space; Space-Time Geometry and HBT; Multiplicities, Intermittency, Correlations; Disoriented Chiral Condensate; Deep Inelastic Scattering at HERA; and Other Contributions.

  6. Supersymmetric Sigma Model geometry

    CERN Document Server

    Lindström, Ulf

    2012-01-01

    This is a review of how sigma models formulated in Superspace have become important tools for understanding geometry. Topics included are: The (hyper)k\\"ahler reduction; projective superspace; the generalized Legendre construction; generalized K\\"ahler geometry and constructions of hyperk\\"ahler metrics on Hermitean symmetric spaces.

  7. Designs and finite geometries

    CERN Document Server

    1996-01-01

    Designs and Finite Geometries brings together in one place important contributions and up-to-date research results in this important area of mathematics. Designs and Finite Geometries serves as an excellent reference, providing insight into some of the most important research issues in the field.

  8. Foundations of algebraic geometry

    CERN Document Server

    Weil, A

    1946-01-01

    This classic is one of the cornerstones of modern algebraic geometry. At the same time, it is entirely self-contained, assuming no knowledge whatsoever of algebraic geometry, and no knowledge of modern algebra beyond the simplest facts about abstract fields and their extensions, and the bare rudiments of the theory of ideals.

  9. Dual doubled geometry

    NARCIS (Netherlands)

    Bergshoeff, Eric A.; Riccioni, Fabio; Alvarez-Gaumé, L.

    2011-01-01

    We probe doubled geometry with dual fundamental branes. i.e. solitons. Restricting ourselves first to solitonic branes with more than two transverse directions we find that the doubled geometry requires an effective wrapping rule for the solitonic branes which is dual to the wrapping rule for fundam

  10. A Lorentzian quantum geometry

    Energy Technology Data Exchange (ETDEWEB)

    Grotz, Andreas

    2011-10-07

    In this thesis, a formulation of a Lorentzian quantum geometry based on the framework of causal fermion systems is proposed. After giving the general definition of causal fermion systems, we deduce space-time as a topological space with an underlying causal structure. Restricting attention to systems of spin dimension two, we derive the objects of our quantum geometry: the spin space, the tangent space endowed with a Lorentzian metric, connection and curvature. In order to get the correspondence to classical differential geometry, we construct examples of causal fermion systems by regularizing Dirac sea configurations in Minkowski space and on a globally hyperbolic Lorentzian manifold. When removing the regularization, the objects of our quantum geometry reduce to the common objects of spin geometry on Lorentzian manifolds, up to higher order curvature corrections.

  11. On the granular stress-geometry equation

    Science.gov (United States)

    DeGiuli, Eric; Schoof, Christian

    2014-01-01

    Using discrete calculus, we derive the missing stress-geometry equation for rigid granular materials in two dimensions, in the mean-field approximation. We show that i) the equation imposes that the voids cannot carry stress, ii) stress transmission is generically elliptic and has a quantitative relation to anisotropic elasticity, and iii) the packing fabric plays an essential role.

  12. Riemann-Finsler Geometry with Applications to Information Geometry

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Information geometry is a new branch in mathematics, originated from the applications of differential geometry to statistics. In this paper we briefly introduce RiemannFinsler geometry, by which we establish Information Geometry on a much broader base,so that the potential applications of Information Geometry will be beyond statistics.

  13. The effect of a county's public high school summer remediation program on student gains on end-of-course standard of learning tests in Algebra I, Biology, Chemistry, Geometry and World History and Geography II

    Science.gov (United States)

    Aiken, Brenda L.

    The Commonwealth of Virginia requires high school students to receive a passing grade in core courses and a passing score on End-of-Course Standards of Learning (EOC SOL) tests to receive verified credits that lead to a Virginia high school diploma. These tests are believed to accurately reflect what students should know and be able to do in order to experience success in their endeavors beyond high school. For some students remediation is required to experience success on EOC SOL tests. This study sought to determine the effect of a County's public high school summer remediation program on student gains on EOC SOL tests in Algebra I, Biology, Chemistry, Geometry, and World History and Geography II. Specifically, the purpose of the study sought to determine the following: (a) If significant gains were made by students who attended the summer remediation program; (b) If significant gains were made by students who did not attend the summer remediation program; (c) If there were differences in gain scores of students who attended and those who did not attend the summer remediation program; and (d) If there were differences in gain scores among students who attended the summer remediation program related to school site, gender, ethnicity, learning ability group, socioeconomic status, and level of English proficiency. The results of the study indicate that students who attended and those who did not attend the summer remediation program made significant gains. However, the gains for students who attended the summer remediation program were significantly greater than the gains made by students who did not attend. The study also found that there were no significant differences in gain scores among students who attended the summer remediation program related to gender, ethnicity, learning ability group, socioeconomic status, and level of English proficiency. There were significant differences in Algebra I gain scores related to school site. Recommendations for

  14. Statistical discrete geometry

    CERN Document Server

    Ariwahjoedi, Seramika; Kosasih, Jusak Sali; Rovelli, Carlo; Zen, Freddy Permana

    2016-01-01

    Following our earlier work, we construct statistical discrete geometry by applying statistical mechanics to discrete (Regge) gravity. We propose a coarse-graining method for discrete geometry under the assumptions of atomism and background independence. To maintain these assumptions, restrictions are given to the theory by introducing cut-offs, both in ultraviolet and infrared regime. Having a well-defined statistical picture of discrete Regge geometry, we take the infinite degrees of freedom (large n) limit. We argue that the correct limit consistent with the restrictions and the background independence concept is not the continuum limit of statistical mechanics, but the thermodynamical limit.

  15. Non-Euclidean geometry

    CERN Document Server

    Bonola, Roberto

    2010-01-01

    This is an excellent historical and mathematical view by a renowned Italian geometer of the geometries that have risen from a rejection of Euclid's parallel postulate. Students, teachers and mathematicians will find here a ready reference source and guide to a field that has now become overwhelmingly important.Non-Euclidean Geometry first examines the various attempts to prove Euclid's parallel postulate-by the Greeks, Arabs, and mathematicians of the Renaissance. Then, ranging through the 17th, 18th and 19th centuries, it considers the forerunners and founders of non-Euclidean geometry, such

  16. ALICE Geometry Database

    CERN Document Server

    Santo, J

    1999-01-01

    The ALICE Geometry Database project consists of the development of a set of data structures to store the geometrical information of the ALICE Detector. This Database will be used in Simulation, Reconstruction and Visualisation and will interface with existing CAD systems and Geometrical Modellers.At the present time, we are able to read a complete GEANT3 geometry, to store it in our database and to visualise it. On disk, we store different geometry files in hierarchical fashion, and all the nodes, materials, shapes, configurations and transformations distributed in this tree structure. The present status of the prototype and its future evolution will be presented.

  17. Discrete and computational geometry

    CERN Document Server

    Devadoss, Satyan L

    2011-01-01

    Discrete geometry is a relatively new development in pure mathematics, while computational geometry is an emerging area in applications-driven computer science. Their intermingling has yielded exciting advances in recent years, yet what has been lacking until now is an undergraduate textbook that bridges the gap between the two. Discrete and Computational Geometry offers a comprehensive yet accessible introduction to this cutting-edge frontier of mathematics and computer science. This book covers traditional topics such as convex hulls, triangulations, and Voronoi diagrams, as well a

  18. Non-Euclidean geometry

    CERN Document Server

    Kulczycki, Stefan

    2008-01-01

    This accessible approach features two varieties of proofs: stereometric and planimetric, as well as elementary proofs that employ only the simplest properties of the plane. A short history of geometry precedes a systematic exposition of the principles of non-Euclidean geometry.Starting with fundamental assumptions, the author examines the theorems of Hjelmslev, mapping a plane into a circle, the angle of parallelism and area of a polygon, regular polygons, straight lines and planes in space, and the horosphere. Further development of the theory covers hyperbolic functions, the geometry of suff

  19. Elementary differential geometry

    CERN Document Server

    Pressley, Andrew

    2001-01-01

    Curves and surfaces are objects that everyone can see, and many of the questions that can be asked about them are natural and easily understood Differential geometry is concerned with the precise mathematical formulation of some of these questions, and with trying to answer them using calculus techniques It is a subject that contains some of the most beautiful and profound results in mathematics yet many of these are accessible to higher-level undergraduates Elementary Differential Geometry presents the main results in the differential geometry of curves and surfaces while keeping the prerequisites to an absolute minimum Nothing more than first courses in linear algebra and multivariate calculus are required, and the most direct and straightforward approach is used at all times Numerous diagrams illustrate both the ideas in the text and the examples of curves and surfaces discussed there The book will provide an invaluable resource to all those taking a first course in differential geometry, for their lecture...

  20. What Is Geometry?

    Science.gov (United States)

    Chern, Shiing-Shen

    1990-01-01

    Discussed are the major historical developments of geometry. Euclid, Descartes, Klein's Erlanger Program, Gaus and Riemann, globalization, topology, Elie Cartan, and an application to molecular biology are included as topics. (KR)

  1. An expedition to geometry

    CERN Document Server

    Kumaresan, S

    2005-01-01

    Including Affine and projective classification of Conics, 2 point homogeneity's of the planes, essential isometrics, non euclidean plan geometrics, in this book, the treatment of Geometry goes beyond the Kleinian views.

  2. Lectures on Symplectic Geometry

    CERN Document Server

    Silva, Ana Cannas

    2001-01-01

    The goal of these notes is to provide a fast introduction to symplectic geometry for graduate students with some knowledge of differential geometry, de Rham theory and classical Lie groups. This text addresses symplectomorphisms, local forms, contact manifolds, compatible almost complex structures, Kaehler manifolds, hamiltonian mechanics, moment maps, symplectic reduction and symplectic toric manifolds. It contains guided problems, called homework, designed to complement the exposition or extend the reader's understanding. There are by now excellent references on symplectic geometry, a subset of which is in the bibliography of this book. However, the most efficient introduction to a subject is often a short elementary treatment, and these notes attempt to serve that purpose. This text provides a taste of areas of current research and will prepare the reader to explore recent papers and extensive books on symplectic geometry where the pace is much faster. For this reprint numerous corrections and cl...

  3. Gingerbread-House Geometry.

    Science.gov (United States)

    Emenaker, Charles E.

    1999-01-01

    Describes a sixth-grade interdisciplinary geometry unit based on Charles Dickens's "A Christmas Carol". Focuses on finding area, volume, and perimeter, and working with estimation, decimals, and fractions in the context of making gingerbread houses. (ASK)

  4. Geometry of differential equations

    CERN Document Server

    Khovanskiĭ, A; Vassiliev, V

    1998-01-01

    This volume contains articles written by V. I. Arnold's colleagues on the occasion of his 60th birthday. The articles are mostly devoted to various aspects of geometry of differential equations and relations to global analysis and Hamiltonian mechanics.

  5. Facilitating Understandings of Geometry.

    Science.gov (United States)

    Pappas, Christine C.; Bush, Sara

    1989-01-01

    Illustrates some learning encounters for facilitating first graders' understanding of geometry. Describes some of children's approaches using Cuisenaire rods and teacher's intervening. Presents six problems involving various combinations of Cuisenaire rods and cubes. (YP)

  6. Introduction to tropical geometry

    CERN Document Server

    Maclagan, Diane

    2015-01-01

    Tropical geometry is a combinatorial shadow of algebraic geometry, offering new polyhedral tools to compute invariants of algebraic varieties. It is based on tropical algebra, where the sum of two numbers is their minimum and the product is their sum. This turns polynomials into piecewise-linear functions, and their zero sets into polyhedral complexes. These tropical varieties retain a surprising amount of information about their classical counterparts. Tropical geometry is a young subject that has undergone a rapid development since the beginning of the 21st century. While establishing itself as an area in its own right, deep connections have been made to many branches of pure and applied mathematics. This book offers a self-contained introduction to tropical geometry, suitable as a course text for beginning graduate students. Proofs are provided for the main results, such as the Fundamental Theorem and the Structure Theorem. Numerous examples and explicit computations illustrate the main concepts. Each of t...

  7. Invitation to geometry

    CERN Document Server

    Melzak, Z A

    2008-01-01

    Intended for students of many different backgrounds with only a modest knowledge of mathematics, this text features self-contained chapters that can be adapted to several types of geometry courses. 1983 edition.

  8. Complex algebraic geometry

    CERN Document Server

    Kollár, János

    1997-01-01

    This volume contains the lectures presented at the third Regional Geometry Institute at Park City in 1993. The lectures provide an introduction to the subject, complex algebraic geometry, making the book suitable as a text for second- and third-year graduate students. The book deals with topics in algebraic geometry where one can reach the level of current research while starting with the basics. Topics covered include the theory of surfaces from the viewpoint of recent higher-dimensional developments, providing an excellent introduction to more advanced topics such as the minimal model program. Also included is an introduction to Hodge theory and intersection homology based on the simple topological ideas of Lefschetz and an overview of the recent interactions between algebraic geometry and theoretical physics, which involve mirror symmetry and string theory.

  9. Derived logarithmic geometry I

    OpenAIRE

    Steffen, Sagave; Timo, Schurg; Gabriele, Vezzosi

    2016-01-01

    In order to develop the foundations of logarithmic derived geometry, we introduce a model category of logarithmic simplicial rings and a notion of derived log \\'etale maps and use this to define derived log stacks.

  10. The geometry of geodesics

    CERN Document Server

    Busemann, Herbert

    2005-01-01

    A comprehensive approach to qualitative problems in intrinsic differential geometry, this text examines Desarguesian spaces, perpendiculars and parallels, covering spaces, the influence of the sign of the curvature on geodesics, more. 1955 edition. Includes 66 figures.

  11. Geometry and Combinatorics

    DEFF Research Database (Denmark)

    Kokkendorff, Simon Lyngby

    2002-01-01

    The subject of this Ph.D.-thesis is somewhere in between continuous and discrete geometry. Chapter 2 treats the geometry of finite point sets in semi-Riemannian hyperquadrics,using a matrix whose entries are a trigonometric function of relative distances in a given point set. The distance...... to the geometry of a simplex in a semi-Riemannian hyperquadric. In chapter 3 we study which finite metric spaces that are realizable in a hyperbolic space in the limit where curvature goes to -∞. We show that such spaces are the so called leaf spaces, the set of degree 1 vertices of weighted trees. We also...... establish results on the limiting geometry of such an isometrically realized leaf space simplex in hyperbolic space, when curvature goes to -∞. Chapter 4 discusses negative type of metric spaces. We give a measure theoretic treatment of this concept and related invariants. The theory developed...

  12. Observer dependent geometries

    CERN Document Server

    Hohmann, Manuel

    2014-01-01

    From general relativity we have learned the principles of general covariance and local Lorentz invariance, which follow from the fact that we consider observables as tensors on a spacetime manifold whose geometry is modeled by a Lorentzian metric. Approaches to quantum gravity, however, hint towards a breaking of these symmetries and the possible existence of more general, non-tensorial geometric structures. Possible implications of these approaches are non-tensorial transformation laws between different observers and an observer-dependent notion of geometry. In this work we review two different frameworks for observer dependent geometries, which may provide hints towards a quantization of gravity and possible explanations for so far unexplained phenomena: Finsler spacetimes and Cartan geometry on observer space. We discuss their definitions, properties and applications to observers, field theories and gravity.

  13. Implosions and hypertoric geometry

    DEFF Research Database (Denmark)

    Dancer, A.; Kirwan, F.; Swann, A.

    2013-01-01

    The geometry of the universal hyperkahler implosion for SU (n) is explored. In particular, we show that the universal hyperkahler implosion naturally contains a hypertoric variety described in terms of quivers. Furthermore, we discuss a gauge theoretic approach to hyperkahler implosion.......The geometry of the universal hyperkahler implosion for SU (n) is explored. In particular, we show that the universal hyperkahler implosion naturally contains a hypertoric variety described in terms of quivers. Furthermore, we discuss a gauge theoretic approach to hyperkahler implosion....

  14. Intermediate algebra & analytic geometry

    CERN Document Server

    Gondin, William R

    1967-01-01

    Intermediate Algebra & Analytic Geometry Made Simple focuses on the principles, processes, calculations, and methodologies involved in intermediate algebra and analytic geometry. The publication first offers information on linear equations in two unknowns and variables, functions, and graphs. Discussions focus on graphic interpretations, explicit and implicit functions, first quadrant graphs, variables and functions, determinate and indeterminate systems, independent and dependent equations, and defective and redundant systems. The text then examines quadratic equations in one variable, system

  15. Higher prequantum geometry

    CERN Document Server

    Schreiber, Urs

    2016-01-01

    This is a survey of motivations, constructions and applications of higher prequantum geometry. In section 1 we highlight the open problem of prequantizing local field theory in a local and gauge invariant way, and we survey how a solution to this problem exists in higher differential geometry. In section 2 we survey examples and problems of interest. In section 3 we survey the abstract cohesive homotopy theory that serves to make all this precise and tractable.

  16. Brans-Dicke geometry

    CERN Document Server

    Punzi, Raffaele; Wohlfarth, Mattias N R

    2008-01-01

    We reveal the non-metric geometry underlying omega-->0 Brans-Dicke theory by unifying the metric and scalar field into a single geometric structure. Taking this structure seriously as the geometry to which matter universally couples, we show that the theory is fully consistent with solar system tests. This is in striking constrast with the standard metric coupling, which grossly violates post-Newtonian experimental constraints.

  17. Brans-Dicke geometry

    Energy Technology Data Exchange (ETDEWEB)

    Punzi, Raffaele [Zentrum fuer Mathematische Physik und II. Institut fuer Theoretische Physik, Universitaet Hamburg, Luruper Chaussee 149, 22761 Hamburg (Germany)], E-mail: raffaele.punzi@desy.de; Schuller, Frederic P. [Max Planck Institut fuer Gravitationsphysik, Albert Einstein Institut, Am Muehlenberg 1, 14467 Potsdam (Germany)], E-mail: fps@aei.mpg.de; Wohlfarth, Mattias N.R. [Zentrum fuer Mathematische Physik und II. Institut fuer Theoretische Physik, Universitaet Hamburg, Luruper Chaussee 149, 22761 Hamburg (Germany)], E-mail: mattias.wohlfarth@desy.de

    2008-12-11

    We reveal the non-metric geometry underlying {omega}{yields}0 Brans-Dicke theory by unifying the metric and scalar field into a single geometric structure. Taking this structure seriously as the geometry to which matter universally couples, we show that the theory is fully consistent with solar system tests. This is in striking contrast with the standard metric coupling, which grossly violates post-Newtonian experimental constraints.

  18. Mechanical Geometry Theorem Proving Based on Groebner Bases

    Institute of Scientific and Technical Information of China (English)

    吴尽昭

    1997-01-01

    A new method for the mechanical elementary geometry theorem proving is presented by using Groebner bases of polynomial ideals.It has two main advantages over the approach proposed in literature:(i)It is complete and not a refutational procdure;(ii) The subcases of the geometry statements which are not generally true can be differentiated clearly.

  19. SOC and Fractal Geometry

    Science.gov (United States)

    McAteer, R. T. J.

    2013-06-01

    When Mandelbrot, the father of modern fractal geometry, made this seemingly obvious statement he was trying to show that we should move out of our comfortable Euclidean space and adopt a fractal approach to geometry. The concepts and mathematical tools of fractal geometry provides insight into natural physical systems that Euclidean tools cannot do. The benet from applying fractal geometry to studies of Self-Organized Criticality (SOC) are even greater. SOC and fractal geometry share concepts of dynamic n-body interactions, apparent non-predictability, self-similarity, and an approach to global statistics in space and time that make these two areas into naturally paired research techniques. Further, the iterative generation techniques used in both SOC models and in fractals mean they share common features and common problems. This chapter explores the strong historical connections between fractal geometry and SOC from both a mathematical and conceptual understanding, explores modern day interactions between these two topics, and discusses how this is likely to evolve into an even stronger link in the near future.

  20. Sources of hyperbolic geometry

    CERN Document Server

    Stillwell, John

    1996-01-01

    This book presents, for the first time in English, the papers of Beltrami, Klein, and Poincaré that brought hyperbolic geometry into the mainstream of mathematics. A recognition of Beltrami comparable to that given the pioneering works of Bolyai and Lobachevsky seems long overdue-not only because Beltrami rescued hyperbolic geometry from oblivion by proving it to be logically consistent, but because he gave it a concrete meaning (a model) that made hyperbolic geometry part of ordinary mathematics. The models subsequently discovered by Klein and Poincaré brought hyperbolic geometry even further down to earth and paved the way for the current explosion of activity in low-dimensional geometry and topology. By placing the works of these three mathematicians side by side and providing commentaries, this book gives the student, historian, or professional geometer a bird's-eye view of one of the great episodes in mathematics. The unified setting and historical context reveal the insights of Beltrami, Klein, and Po...

  1. Students Discovering Spherical Geometry Using Dynamic Geometry Software

    Science.gov (United States)

    Guven, Bulent; Karatas, Ilhan

    2009-01-01

    Dynamic geometry software (DGS) such as Cabri and Geometers' Sketchpad has been regularly used worldwide for teaching and learning Euclidean geometry for a long time. The DGS with its inductive nature allows students to learn Euclidean geometry via explorations. However, with respect to non-Euclidean geometries, do we need to introduce them to…

  2. Students Discovering Spherical Geometry Using Dynamic Geometry Software

    Science.gov (United States)

    Guven, Bulent; Karatas, Ilhan

    2009-01-01

    Dynamic geometry software (DGS) such as Cabri and Geometers' Sketchpad has been regularly used worldwide for teaching and learning Euclidean geometry for a long time. The DGS with its inductive nature allows students to learn Euclidean geometry via explorations. However, with respect to non-Euclidean geometries, do we need to introduce them to…

  3. Emergent Complex Network Geometry

    CERN Document Server

    Wu, Zhihao; Rahmede, Christoph; Bianconi, Ginestra

    2014-01-01

    Networks are mathematical structures that are universally used to describe a large variety of complex systems such as the brain or the Internet. Characterizing the geometrical properties of these networks has become increasingly relevant for routing problems, inference and data mining. In real growing networks, topological, structural and geometrical properties emerge spontaneously from their dynamical rules. Nevertheless we still miss a model in which networks develop an emergent complex geometry. Here we show that a single two parameter network model, the growing geometrical network, can generate complex network geometries with non-trivial distribution of curvatures, combining exponential growth and small-world properties with finite spectral dimensionality. In one limit, the non-equilibrium dynamical rules of these networks can generate scale-free networks with clustering and communities, in another limit planar random geometries with non-trivial modularity. Finally we find that these properties of the geo...

  4. Computational synthetic geometry

    CERN Document Server

    Bokowski, Jürgen

    1989-01-01

    Computational synthetic geometry deals with methods for realizing abstract geometric objects in concrete vector spaces. This research monograph considers a large class of problems from convexity and discrete geometry including constructing convex polytopes from simplicial complexes, vector geometries from incidence structures and hyperplane arrangements from oriented matroids. It turns out that algorithms for these constructions exist if and only if arbitrary polynomial equations are decidable with respect to the underlying field. Besides such complexity theorems a variety of symbolic algorithms are discussed, and the methods are applied to obtain new mathematical results on convex polytopes, projective configurations and the combinatorics of Grassmann varieties. Finally algebraic varieties characterizing matroids and oriented matroids are introduced providing a new basis for applying computer algebra methods in this field. The necessary background knowledge is reviewed briefly. The text is accessible to stud...

  5. Supersymmetry and noncommutative geometry

    CERN Document Server

    Beenakker, Wim; Suijlekom, Walter D van

    2016-01-01

    In this work the question whether noncommutative geometry allows for supersymmetric theories is addressed. Noncommutative geometry has seen remarkable applications in high energy physics, viz. the geometrical interpretation of the Standard Model, however such a question has not been answered in a conclusive way so far. The book starts with a systematic analysis of the possibilities for so-called almost-commutative geometries on a 4-dimensional, flat background to exhibit not only a particle content that is eligible for supersymmetry, but also have a supersymmetric action. An approach is proposed in which the basic `building blocks' of potentially supersymmetric theories and the demands for their action to be supersymmetric are identified. It is then described how a novel kind of soft supersymmetry breaking Lagrangian arises naturally from the spectral action. Finally, the above formalism is applied to explore the existence of a noncommutative version of the minimal supersymmetric Standard Model. This book is ...

  6. Universality of geometry

    CERN Document Server

    Wetterich, C

    2012-01-01

    In models of emergent gravity the metric arises as the expectation value of some collective field. Usually, many different collective fields with appropriate tensor properties are candidates for a metric. Which collective field describes the "physical geometry"? We resolve this "metric ambiguity" by an investigation of the most general form of the quantum effective action for several metrics. In the long-distance limit the physical metric is universal and accounts for a massless graviton. Other degrees of freedom contained in the various metric candidates describe very massive scalars and symmetric second rank tensors. They only play a role at microscopic distances, typically around the Planck length. The universality of geometry at long distances extends to the vierbein and the connection. On the other hand, for distances and time intervals of Planck size geometry looses its universal meaning. Time is born with the big bang.

  7. Geometry of hypersurfaces

    CERN Document Server

    Cecil, Thomas E

    2015-01-01

    This exposition provides the state-of-the art on the differential geometry of hypersurfaces in real, complex, and quaternionic space forms. Special emphasis is placed on isoparametric and Dupin hypersurfaces in real space forms as well as Hopf hypersurfaces in complex space forms. The book is accessible to a reader who has completed a one-year graduate course in differential geometry. The text, including open problems and an extensive list of references, is an excellent resource for researchers in this area. Geometry of Hypersurfaces begins with the basic theory of submanifolds in real space forms. Topics include shape operators, principal curvatures and foliations, tubes and parallel hypersurfaces, curvature spheres and focal submanifolds. The focus then turns to the theory of isoparametric hypersurfaces in spheres. Important examples and classification results are given, including the construction of isoparametric hypersurfaces based on representations of Clifford algebras. An in-depth treatment of Dupin hy...

  8. Complex differential geometry

    CERN Document Server

    Zheng, Fangyang

    2002-01-01

    The theory of complex manifolds overlaps with several branches of mathematics, including differential geometry, algebraic geometry, several complex variables, global analysis, topology, algebraic number theory, and mathematical physics. Complex manifolds provide a rich class of geometric objects, for example the (common) zero locus of any generic set of complex polynomials is always a complex manifold. Yet complex manifolds behave differently than generic smooth manifolds; they are more coherent and fragile. The rich yet restrictive character of complex manifolds makes them a special and interesting object of study. This book is a self-contained graduate textbook that discusses the differential geometric aspects of complex manifolds. The first part contains standard materials from general topology, differentiable manifolds, and basic Riemannian geometry. The second part discusses complex manifolds and analytic varieties, sheaves and holomorphic vector bundles, and gives a brief account of the surface classifi...

  9. Integral Geometry and Holography

    CERN Document Server

    Czech, Bartlomiej; McCandlish, Samuel; Sully, James

    2015-01-01

    We present a mathematical framework which underlies the connection between information theory and the bulk spacetime in the AdS$_3$/CFT$_2$ correspondence. A key concept is kinematic space: an auxiliary Lorentzian geometry whose metric is defined in terms of conditional mutual informations and which organizes the entanglement pattern of a CFT state. When the field theory has a holographic dual obeying the Ryu-Takayanagi proposal, kinematic space has a direct geometric meaning: it is the space of bulk geodesics studied in integral geometry. Lengths of bulk curves are computed by kinematic volumes, giving a precise entropic interpretation of the length of any bulk curve. We explain how basic geometric concepts -- points, distances and angles -- are reflected in kinematic space, allowing one to reconstruct a large class of spatial bulk geometries from boundary entanglement entropies. In this way, kinematic space translates between information theoretic and geometric descriptions of a CFT state. As an example, we...

  10. Lectures on discrete geometry

    CERN Document Server

    2002-01-01

    Discrete geometry investigates combinatorial properties of configurations of geometric objects. To a working mathematician or computer scientist, it offers sophisticated results and techniques of great diversity and it is a foundation for fields such as computational geometry or combinatorial optimization. This book is primarily a textbook introduction to various areas of discrete geometry. In each area, it explains several key results and methods, in an accessible and concrete manner. It also contains more advanced material in separate sections and thus it can serve as a collection of surveys in several narrower subfields. The main topics include: basics on convex sets, convex polytopes, and hyperplane arrangements; combinatorial complexity of geometric configurations; intersection patterns and transversals of convex sets; geometric Ramsey-type results; polyhedral combinatorics and high-dimensional convexity; and lastly, embeddings of finite metric spaces into normed spaces. Jiri Matousek is Professor of Com...

  11. Geometry and Cloaking Devices

    Science.gov (United States)

    Ochiai, T.; Nacher, J. C.

    2011-09-01

    Recently, the application of geometry and conformal mappings to artificial materials (metamaterials) has attracted the attention in various research communities. These materials, characterized by a unique man-made structure, have unusual optical properties, which materials found in nature do not exhibit. By applying the geometry and conformal mappings theory to metamaterial science, it may be possible to realize so-called "Harry Potter cloaking device". Although such a device is still in the science fiction realm, several works have shown that by using such metamaterials it may be possible to control the direction of the electromagnetic field at will. We could then make an object hidden inside of a cloaking device. Here, we will explain how to design invisibility device using differential geometry and conformal mappings.

  12. The Geometry of Conventionality

    CERN Document Server

    Weatherall, James Owen

    2013-01-01

    Hans Reichenbach famously argued that the geometry of spacetime is conventional in relativity theory, in the sense that one can freely choose the spacetime metric so long as one is willing to postulate a "universal force field". Here we make precise a sense in which the field Reichenbach defines fails to be a "force". We then argue that there is an interesting and perhaps tenable sense in which geometry is conventional in classical spacetimes. We conclude with a no-go result showing that the variety of conventionalism available in classical spacetimes does not extend to relativistic spacetimes.

  13. A programmer's geometry

    CERN Document Server

    Bowyer, Adrian

    1983-01-01

    A Programmer's Geometry provides a guide in programming geometric shapes. The book presents formulas and examples of computer representation and coding of geometry. Each of the nine chapters of the text deals with the representation and solution of a specific geometrical problem, such as areas, vectors, and volumes. The last chapter provides a brief discussion on generating image through a computer. The codes presented in the book are written in FORTRAN 77. The text will be of great use to programmers who are working on projects that involve geometric calculations.

  14. Geometry and symmetry

    CERN Document Server

    Yale, Paul B

    2012-01-01

    This book is an introduction to the geometry of Euclidean, affine, and projective spaces with special emphasis on the important groups of symmetries of these spaces. The two major objectives of the text are to introduce the main ideas of affine and projective spaces and to develop facility in handling transformations and groups of transformations. Since there are many good texts on affine and projective planes, the author has concentrated on the n-dimensional cases.Designed to be used in advanced undergraduate mathematics or physics courses, the book focuses on ""practical geometry,"" emphasi

  15. Non-Riemannian geometry

    CERN Document Server

    Eisenhart, L P

    1927-01-01

    The use of the differential geometry of a Riemannian space in the mathematical formulation of physical theories led to important developments in the geometry of such spaces. The concept of parallelism of vectors, as introduced by Levi-Civita, gave rise to a theory of the affine properties of a Riemannian space. Covariant differentiation, as developed by Christoffel and Ricci, is a fundamental process in this theory. Various writers, notably Eddington, Einstein and Weyl, in their efforts to formulate a combined theory of gravitation and electromagnetism, proposed a simultaneous generalization o

  16. Conference on Strings, Duality, and Geometry

    CERN Document Server

    Phong, Duong; Yau, Shing-Tung; Mirror Symmetry IV

    2002-01-01

    This book presents contributions of participants of a workshop held at the Centre de Recherches Mathématiques (CRM), University of Montréal. It can be viewed as a sequel to Mirror Symmetry I (1998), Mirror Symmetry II (1996), and Mirror Symmetry III (1999), copublished by the AMS and International Press. The volume presents a broad survey of many of the noteworthy developments that have taken place in string theory, geometry, and duality since the mid 1990s. Some of the topics emphasized include the following: Integrable models and supersymmetric gauge theories; theory of M- and D-branes and noncommutative geometry; duality between strings and gauge theories; and elliptic genera and automorphic forms. Several introductory articles present an overview of the geometric and physical aspects of mirror symmetry and of corresponding developments in symplectic geometry. The book provides an efficient way for a very broad audience of mathematicians and physicists to explore the frontiers of research into this rapi...

  17. Universal correlators from geometry

    Energy Technology Data Exchange (ETDEWEB)

    Dijkgraaf, Robbert [Institute for Theoretical Physics, University of Amsterdam, Valckenierstraat 65, 1018 XE Amsterdam (Netherlands); Korteweg-de Vries Institute for Mathematics, University of Amsterdam, Valckenierstraat 65, 1018 XE Amsterdam (Netherlands); Temuerhan, Mine; Sinkovics, Annamaria [Institute for Theoretical Physics, University of Amsterdam, Valckenierstraat 65, 1018 XE Amsterdam (Netherlands)]. E-mail: sinkovic@science.uva.nl

    2004-11-01

    Matrix model correlators show universal behaviour at short distances. We provide a derivation for these universal correlators by inserting probe branes in the underlying effective geometry. We generalize these results to study correlators of branes and their universal behaviour in the Calabi-Yau crystals, where we find a role for a generalized brane insertion. (author)

  18. Universal Correlators from Geometry

    Science.gov (United States)

    Dijkgraaf, Robbert; Sinkovics, Annamaria; Temurhan, Mine

    2004-11-01

    Matrix model correlators show universal behaviour at short distances. We provide a derivation for these universal correlators by inserting probe branes in the underlying effective geometry. We generalize these results to study correlators of branes and their universal behaviour in the Calabi-Yau crystals, where we find a role for a generalized brane insertion.

  19. Universal Correlators from Geometry

    CERN Document Server

    Dijkgraaf, R; Temurhan, M; Dijkgraaf, Robbert; Sinkovics, Annamaria; Temurhan, Mine

    2004-01-01

    Matrix model correlators show universal behaviour at short distances. We provide a derivation for these universal correlators by inserting probe branes in the underlying effective geometry. We generalize these results to study correlators of branes and their universal behaviour in the Calabi-Yau crystals, where we find a role for a generalized brane insertion.

  20. Geometry and physics

    Science.gov (United States)

    Atiyah, Michael; Dijkgraaf, Robbert; Hitchin, Nigel

    2010-01-01

    We review the remarkably fruitful interactions between mathematics and quantum physics in the past decades, pointing out some general trends and highlighting several examples, such as the counting of curves in algebraic geometry, invariants of knots and four-dimensional topology. PMID:20123740

  1. Sliding vane geometry turbines

    Science.gov (United States)

    Sun, Harold Huimin; Zhang, Jizhong; Hu, Liangjun; Hanna, Dave R

    2014-12-30

    Various systems and methods are described for a variable geometry turbine. In one example, a turbine nozzle comprises a central axis and a nozzle vane. The nozzle vane includes a stationary vane and a sliding vane. The sliding vane is positioned to slide in a direction substantially tangent to an inner circumference of the turbine nozzle and in contact with the stationary vane.

  2. Diophantine geometry an introduction

    CERN Document Server

    Hindry, Marc

    2000-01-01

    This is an introduction to diophantine geometry at the advanced graduate level. The book contains a proof of the Mordell conjecture which will make it quite attractive to graduate students and professional mathematicians. In each part of the book, the reader will find numerous exercises.

  3. Towards relativistic quantum geometry

    Energy Technology Data Exchange (ETDEWEB)

    Ridao, Luis Santiago [Instituto de Investigaciones Físicas de Mar del Plata (IFIMAR), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Mar del Plata (Argentina); Bellini, Mauricio, E-mail: mbellini@mdp.edu.ar [Departamento de Física, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata, Funes 3350, C.P. 7600, Mar del Plata (Argentina); Instituto de Investigaciones Físicas de Mar del Plata (IFIMAR), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Mar del Plata (Argentina)

    2015-12-17

    We obtain a gauge-invariant relativistic quantum geometry by using a Weylian-like manifold with a geometric scalar field which provides a gauge-invariant relativistic quantum theory in which the algebra of the Weylian-like field depends on observers. An example for a Reissner–Nordström black-hole is studied.

  4. Advanced geometries and regimes

    Energy Technology Data Exchange (ETDEWEB)

    Bulanov, S. S. [Univeristy of California, Berkeley, CA, 94720 (United States); Bulanov, S. V. [Kansai Photon Science Institute, JAEA, Kizugawa, Kyoto 619-0215 (Japan); Turchetti, G. [Dipartimento di Fisica, Università di Bologna and INFN Sezione di Bologna, Via Irnerio, 46-I-40126 Bologna (Italy); Limpouch, J.; Klimo, O.; Psikal, J. [Institute of Physics of the ASCR, ELI-Beamlines/HiLASE project, Na Slovance 2, 18221 Prague, Czech Republic and Czech Technical University in Prague, FNSPE, Brehova 7, 115 19 Prague (Czech Republic); Antici, P. [Dipartimento di Energetica ed INFM, Università di Roma, La Sapienza, 00165 Roma (Italy); Margarone, D.; Korn, G. [Institute of Physics of the ASCR, ELI-Beamlines/HiLASE project, Na Slovance 2, 18221 Prague (Czech Republic)

    2013-07-26

    We review and discuss different schemes of laser ion acceleration as well as advanced target geometries in connection with the development of the laser-driven proton source for hadron therapy of oncological diseases, which is a part of the ELIMED project.

  5. Emergent Hyperbolic Network Geometry

    Science.gov (United States)

    Bianconi, Ginestra; Rahmede, Christoph

    2017-02-01

    A large variety of interacting complex systems are characterized by interactions occurring between more than two nodes. These systems are described by simplicial complexes. Simplicial complexes are formed by simplices (nodes, links, triangles, tetrahedra etc.) that have a natural geometric interpretation. As such simplicial complexes are widely used in quantum gravity approaches that involve a discretization of spacetime. Here, by extending our knowledge of growing complex networks to growing simplicial complexes we investigate the nature of the emergent geometry of complex networks and explore whether this geometry is hyperbolic. Specifically we show that an hyperbolic network geometry emerges spontaneously from models of growing simplicial complexes that are purely combinatorial. The statistical and geometrical properties of the growing simplicial complexes strongly depend on their dimensionality and display the major universal properties of real complex networks (scale-free degree distribution, small-world and communities) at the same time. Interestingly, when the network dynamics includes an heterogeneous fitness of the faces, the growing simplicial complex can undergo phase transitions that are reflected by relevant changes in the network geometry.

  6. Spacetime and Euclidean Geometry

    CERN Document Server

    Brill, D R; Brill, Dieter; Jacobson, Ted

    2004-01-01

    Using only the principle of relativity and Euclidean geometry we show in this pedagogical article that the square of proper time or length in a two-dimensional spacetime diagram is proportional to the Euclidean area of the corresponding causal domain. We use this relation to derive the Minkowski line element by two geometric proofs of the "spacetime Pythagoras theorem".

  7. Spacetime and Euclidean geometry

    Science.gov (United States)

    Brill, Dieter; Jacobson, Ted

    2006-04-01

    Using only the principle of relativity and Euclidean geometry we show in this pedagogical article that the square of proper time or length in a two-dimensional spacetime diagram is proportional to the Euclidean area of the corresponding causal domain. We use this relation to derive the Minkowski line element by two geometric proofs of the spacetime Pythagoras theorem.

  8. Towards a Nano Geometry?

    DEFF Research Database (Denmark)

    Booss-Bavnbek, Bernhelm

    2011-01-01

    This paper applies I.M. Gelfand's distinction between adequate and non-adequate use of mathematical language in different contexts to the newly opened window of model-based measurements of intracellular dynamics. The specifics of geometry and dynamics on the mesoscale of cell physiology are elabo...

  9. Origami, Geometry and Art

    Science.gov (United States)

    Wares, Arsalan; Elstak, Iwan

    2017-01-01

    The purpose of this paper is to describe the mathematics that emanates from the construction of an origami box. We first construct a simple origami box from a rectangular sheet and then discuss some of the mathematical questions that arise in the context of geometry and algebra. The activity can be used as a context for illustrating how algebra…

  10. Geometry Euclid and beyond

    CERN Document Server

    Hartshorne, Robin

    2000-01-01

    In recent years, I have been teaching a junior-senior-level course on the classi­ cal geometries. This book has grown out of that teaching experience. I assume only high-school geometry and some abstract algebra. The course begins in Chapter 1 with a critical examination of Euclid's Elements. Students are expected to read concurrently Books I-IV of Euclid's text, which must be obtained sepa­ rately. The remainder of the book is an exploration of questions that arise natu­ rally from this reading, together with their modern answers. To shore up the foundations we use Hilbert's axioms. The Cartesian plane over a field provides an analytic model of the theory, and conversely, we see that one can introduce coordinates into an abstract geometry. The theory of area is analyzed by cutting figures into triangles. The algebra of field extensions provides a method for deciding which geometrical constructions are possible. The investigation of the parallel postulate leads to the various non-Euclidean geometries. And ...

  11. History of analytic geometry

    CERN Document Server

    Boyer, Carl B

    2012-01-01

    Designed as an integrated survey of the development of analytic geometry, this study presents the concepts and contributions from before the Alexandrian Age through the eras of the great French mathematicians Fermat and Descartes, and on through Newton and Euler to the "Golden Age," from 1789 to 1850.

  12. Origami, Geometry and Art

    Science.gov (United States)

    Wares, Arsalan; Elstak, Iwan

    2017-01-01

    The purpose of this paper is to describe the mathematics that emanates from the construction of an origami box. We first construct a simple origami box from a rectangular sheet and then discuss some of the mathematical questions that arise in the context of geometry and algebra. The activity can be used as a context for illustrating how algebra…

  13. An introduction to Minkowski geometries

    Science.gov (United States)

    Farnsworth, David L.

    2016-07-01

    The fundamental ideas of Minkowski geometries are presented. Learning about Minkowski geometries can sharpen our students' understanding of concepts such as distance measurement. Many of its ideas are important and accessible to undergraduate students. Following a brief overview, distance and orthogonality in Minkowski geometries are thoroughly discussed and many illustrative examples and applications are supplied. Suggestions for further study of these geometries are given. Indeed, Minkowski geometries are an excellent source of topics for undergraduate research and independent study.

  14. Compact 0.3-to-1.125 GHz self-biased phase-locked loop for system-on-chip clock generation in 0.18 µm CMOS

    Science.gov (United States)

    Zhang, Zhao; Liu, Liyuan; Feng, Peng; Liu, Jian; Wu, Nanjian

    2016-04-01

    In this paper, we propose a compact ring-oscillator-based self-biased phase-locked loop (SBPLL) for system-on-chip (SoC) clock generation. It adopts the proposed triple-well NMOS source degeneration voltage-to-current (V-I) converter instead of the operational amplifier (OPAMP) based V-I converter and a proposed simple start-up circuit with a negligible area to save power and area. The SBPLL is implemented in the 0.18 µm CMOS process, and it occupies 0.048 mm2 active core. The measurement results show the SBPLL can generate output frequency in a wide range from 300 MHz to 1.125 GHz with a constant loop bandwidth that is around 5 MHz and a relatively low jitter performance that is less than 4.9 mUI over the entire covered frequency range. From -20 to 70 °C the rms jitter variation and loop bandwidth variation at 1.125 GHz are 0.2 ps and 350 kHz, respectively. The rms jitter performance variation of all covered frequency points is less than 10% in the supply range from 1.5 to 1.7 V. Such SBPLL shows robustness over environmental variation. The maximum power consumption is 5.6 mW with 1.6 V supply at an output frequency of 1.125 GHz.

  15. Cylindrical geometry hall thruster

    Science.gov (United States)

    Raitses, Yevgeny; Fisch, Nathaniel J.

    2002-01-01

    An apparatus and method for thrusting plasma, utilizing a Hall thruster with a cylindrical geometry, wherein ions are accelerated in substantially the axial direction. The apparatus is suitable for operation at low power. It employs small size thruster components, including a ceramic channel, with the center pole piece of the conventional annular design thruster eliminated or greatly reduced. Efficient operation is accomplished through magnetic fields with a substantial radial component. The propellant gas is ionized at an optimal location in the thruster. A further improvement is accomplished by segmented electrodes, which produce localized voltage drops within the thruster at optimally prescribed locations. The apparatus differs from a conventional Hall thruster, which has an annular geometry, not well suited to scaling to small size, because the small size for an annular design has a great deal of surface area relative to the volume.

  16. Renyi Entropy and Geometry

    CERN Document Server

    Lee, Jeongseog; Safdi, Benjamin R

    2014-01-01

    Entanglement entropy in even dimensional conformal field theories (CFTs) contains well-known universal terms arising from the conformal anomaly. Renyi entropies are natural generalizations of the entanglement entropy that are much less understood. Above two spacetime dimensions, the universal terms in the Renyi entropies are unknown for general entangling geometries. We conjecture a new structure in the dependence of the four-dimensional Renyi entropies on the intrinsic and extrinsic geometry of the entangling surface. We provide evidence for this conjecture by direct numerical computations in the free scalar and fermion field theories. The computation involves relating the four-dimensional free massless Renyi entropies across cylindrical entangling surfaces to corresponding three-dimensional massive Renyi entropies across circular entangling surfaces. Our numerical technique also allows us to directly probe other interesting aspects of three-dimensional Renyi entropy, including the massless renormalized Reny...

  17. Spectral Geometry and Causality

    CERN Document Server

    Kopf, T

    1996-01-01

    For a physical interpretation of a theory of quantum gravity, it is necessary to recover classical spacetime, at least approximately. However, quantum gravity may eventually provide classical spacetimes by giving spectral data similar to those appearing in noncommutative geometry, rather than by giving directly a spacetime manifold. It is shown that a globally hyperbolic Lorentzian manifold can be given by spectral data. A new phenomenon in the context of spectral geometry is observed: causal relationships. The employment of the causal relationships of spectral data is shown to lead to a highly efficient description of Lorentzian manifolds, indicating the possible usefulness of this approach. Connections to free quantum field theory are discussed for both motivation and physical interpretation. It is conjectured that the necessary spectral data can be generically obtained from an effective field theory having the fundamental structures of generalized quantum mechanics: a decoherence functional and a choice of...

  18. Multivariate calculus and geometry

    CERN Document Server

    Dineen, Seán

    2014-01-01

    Multivariate calculus can be understood best by combining geometric insight, intuitive arguments, detailed explanations and mathematical reasoning. This textbook has successfully followed this programme. It additionally provides a solid description of the basic concepts, via familiar examples, which are then tested in technically demanding situations. In this new edition the introductory chapter and two of the chapters on the geometry of surfaces have been revised. Some exercises have been replaced and others provided with expanded solutions. Familiarity with partial derivatives and a course in linear algebra are essential prerequisites for readers of this book. Multivariate Calculus and Geometry is aimed primarily at higher level undergraduates in the mathematical sciences. The inclusion of many practical examples involving problems of several variables will appeal to mathematics, science and engineering students.

  19. Algebra, Arithmetic, and Geometry

    CERN Document Server

    Tschinkel, Yuri

    2009-01-01

    The two volumes of "Algebra, Arithmetic, and Geometry: In Honor of Y.I. Manin" are composed of invited expository articles and extensions detailing Manin's contributions to the subjects, and are in celebration of his 70th birthday. The well-respected and distinguished contributors include: Behrend, Berkovich, Bost, Bressler, Calaque, Carlson, Chambert-Loir, Colombo, Connes, Consani, Dabrowski, Deninger, Dolgachev, Donaldson, Ekedahl, Elsenhans, Enriques, Etingof, Fock, Friedlander, Geemen, Getzler, Goncharov, Harris, Iskovskikh, Jahnel, Kaledin, Kapranov, Katz, Kaufmann, Kollar, Kont

  20. Geometry of Quantum States

    Science.gov (United States)

    Bengtsson, Ingemar; Zyczkowski, Karol

    2007-12-01

    Preface; 1. Convexity, colours and statistics; 2. Geometry of probability distributions; 3. Much ado about spheres; 4. Complex projective spaces; 5. Outline of quantum mechanics; 6. Coherent states and group actions; 7. The stellar representation; 8. The space of density matrices; 9. Purification of mixed quantum states; 10. Quantum operations; 11. Duality: maps versus states; 12. Density matrices and entropies; 13. Distinguishability measures; 14. Monotone metrics and measures; 15. Quantum entanglement; Epilogue; Appendices; References; Index.

  1. Differential geometry and thermodynamics

    CERN Document Server

    Quevedo, H

    2003-01-01

    In this work we present the first steps of a new approach to the study of thermodynamics in the context of differential geometry. We introduce a fundamental differential 1-form and a metric on a pseudo-Euclidean manifold coordinatized by means of the extensive thermodynamic variables. The study of the connection and the curvature of these objects is initialized in this work by using Cartan structure equations. (Author)

  2. Geometry and Destiny

    CERN Document Server

    Krauss, L M; Krauss, Lawrence M.; Turner, Michael S.

    1999-01-01

    The recognition that the cosmological constant may be non-zero forces us to re-evaluate standard notions about the connection between geometry and the fate of our Universe. An open Universe can recollapse, and a closed Universe can expand forever. As a corollary, we point out that there is no set of cosmological observations we can perform that will unambiguously allow us to determine what the ultimate destiny of the Universe will be.

  3. Inflation from quantum geometry.

    Science.gov (United States)

    Bojowald, Martin

    2002-12-23

    Quantum geometry predicts that a universe evolves through an inflationary phase at small volume before exiting gracefully into a standard Friedmann phase. This does not require the introduction of additional matter fields with ad hoc potentials; rather, it occurs because of a quantum gravity modification of the kinetic part of ordinary matter Hamiltonians. An application of the same mechanism can explain why the present day cosmological acceleration is so tiny.

  4. Complex geometries in wood

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette; Riiber Nielsen, Jacob

    2009-01-01

    The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust parame...... parametric model and a generic design language a later explored the possibilities to construct complex shaped geometries with self registering joints on modern wood crafting machines. The research was carried out as collaboration with industrial partners....

  5. Integral geometry and holography

    Science.gov (United States)

    Czech, Bartłomiej; Lamprou, Lampros; McCandlish, Samuel; Sully, James

    2015-10-01

    We present a mathematical framework which underlies the connection between information theory and the bulk spacetime in the AdS3/CFT2 correspondence. A key concept is kinematic space: an auxiliary Lorentzian geometry whose metric is defined in terms of conditional mutual informations and which organizes the entanglement pattern of a CFT state. When the field theory has a holographic dual obeying the Ryu-Takayanagi proposal, kinematic space has a direct geometric meaning: it is the space of bulk geodesics studied in integral geometry. Lengths of bulk curves are computed by kinematic volumes, giving a precise entropic interpretation of the length of any bulk curve. We explain how basic geometric concepts — points, distances and angles — are reflected in kinematic space, allowing one to reconstruct a large class of spatial bulk geometries from boundary entanglement entropies. In this way, kinematic space translates between information theoretic and geometric descriptions of a CFT state. As an example, we discuss in detail the static slice of AdS3 whose kinematic space is two-dimensional de Sitter space.

  6. Hilbert, completeness and geometry

    Directory of Open Access Journals (Sweden)

    Giorgio Venturi

    2011-11-01

    Full Text Available This paper aims to show how the mathematical content of Hilbert's Axiom of Completeness consists in an attempt to solve the more general problem of the relationship between intuition and formalization. Hilbert found the accordance between these two sides of mathematical knowledge at a logical level, clarifying the necessary and sufficient conditions for a good formalization of geometry. We will tackle the problem of what is, for Hilbert, the definition of geometry. The solution of this problem will bring out how Hilbert's conception of mathematics is not as innovative as his conception of the axiomatic method. The role that the demonstrative tools play in Hilbert's foundational reflections will also drive us to deal with the problem of the purity of methods, explicitly addressed by Hilbert. In this respect Hilbert's position is very innovative and deeply linked to his modern conception of the axiomatic method. In the end we will show that the role played by the Axiom of Completeness for geometry is the same as the Axiom of Induction for arithmetic and of Church-Turing thesis for computability theory. We end this paper arguing that set theory is the right context in which applying the axiomatic method to mathematics and we postpone to a sequel of this work the attempt to offer a solution similar to Hilbert's for the completeness of set theory.

  7. Integral geometry and valuations

    CERN Document Server

    Solanes, Gil

    2014-01-01

    Valuations are finitely additive functionals on the space of convex bodies. Their study has become a central subject in convexity theory, with fundamental applications to integral geometry. In the last years there has been significant progress in the theory of valuations, which in turn has led to important achievements in integral geometry. This book originated from two courses delivered by the authors at the CRM and provides a self-contained introduction to these topics, covering most of the recent advances. The first part, by Semyon Alesker, is devoted to the theory of convex valuations, with emphasis on the latest developments. A special focus is put on the new fundamental structures of the space of valuations discovered after Alesker's irreducibility theorem. Moreover, the author describes the newly developed theory of valuations on manifolds. In the second part, Joseph H. G. Fu gives a modern introduction to integral geometry in the sense of Blaschke and Santaló, based on the notions and tools presented...

  8. Introductory non-Euclidean geometry

    CERN Document Server

    Manning, Henry Parker

    1963-01-01

    This fine and versatile introduction begins with the theorems common to Euclidean and non-Euclidean geometry, and then it addresses the specific differences that constitute elliptic and hyperbolic geometry. 1901 edition.

  9. Geometry for the Secondary School

    Science.gov (United States)

    Moalem, D.

    1977-01-01

    A sequential but non-axiomatic high school geometry course which includes Euclidean, transformation, and analytic geometry and vectors and matrices, and emphasizes the invariance property of transformations, is outlined. Sample problems, solutions, and comments are included. (MN)

  10. Linear connections on matrix geometries

    CERN Document Server

    Madore, J; Mourad, J; Madore, John; Masson, Thierry; Mourad, Jihad

    1994-01-01

    A general definition of a linear connection in noncommutative geometry has been recently proposed. Two examples are given of linear connections in noncommutative geometries which are based on matrix algebras. They both possess a unique metric connection.

  11. Geometry success in 20 mins

    CERN Document Server

    Editors, LearningExpress

    2010-01-01

    Whether you're new to geometry or just looking for a refresher, this completely revised and updated third edition of Geometry Success in 20 Minutes a Day offers a 20-step lesson plan that provides quick and thorough instruction in practical, critical skills. Stripped of unnecessary math jargon but bursting with geometry essentials, Geometry Success in 20 Minutes a Day is an invaluable resource for both students and adults.

  12. Teaching of Geometry in Bulgaria

    Science.gov (United States)

    Bankov, Kiril

    2013-01-01

    Geometry plays an important role in the school mathematics curriculum all around the world. Teaching of geometry varies a lot (Hoyls, Foxman, & Kuchemann, 2001). Many countries revise the objectives, the content, and the approaches to the geometry in school. Studies of the processes show that there are not common trends of these changes…

  13. Elementary algebraic geometry

    CERN Document Server

    Kendig, Keith

    2015-01-01

    Designed to make learning introductory algebraic geometry as easy as possible, this text is intended for advanced undergraduates and graduate students who have taken a one-year course in algebra and are familiar with complex analysis. This newly updated second edition enhances the original treatment's extensive use of concrete examples and exercises with numerous figures that have been specially redrawn in Adobe Illustrator. An introductory chapter that focuses on examples of curves is followed by a more rigorous and careful look at plane curves. Subsequent chapters explore commutative ring th

  14. Geometry and trigonometry

    CERN Document Server

    2015-01-01

    This stimulating volume offers a broad collection of the principles of geometry and trigonometry and contains colorful diagrams to bring mathematical principles to life. Subjects are enriched by references to famous mathematicians and their ideas, and the stories are presented in a very comprehensible way. Readers investigate the relationships of points, lines, surfaces, and solids. They study construction methods for drawing figures, a wealth of facts about these figures, and above all, methods to prove the facts. They learn about triangle measure for circular motion, sine and cosine, tangent

  15. Local analytic geometry

    CERN Document Server

    Abhyankar, Shreeram Shankar

    1964-01-01

    This book provides, for use in a graduate course or for self-study by graduate students, a well-motivated treatment of several topics, especially the following: (1) algebraic treatment of several complex variables; (2) geometric approach to algebraic geometry via analytic sets; (3) survey of local algebra; (4) survey of sheaf theory. The book has been written in the spirit of Weierstrass. Power series play the dominant role. The treatment, being algebraic, is not restricted to complex numbers, but remains valid over any complete-valued field. This makes it applicable to situations arising from

  16. Kinematic geometry of gearing

    CERN Document Server

    Dooner, David B

    2012-01-01

    Building on the first edition published in 1995 this new edition of Kinematic Geometry of Gearing has been extensively revised and updated with new and original material. This includes the methodology for general tooth forms, radius of torsure', cylinder of osculation, and cylindroid of torsure; the author has also completely reworked the '3 laws of gearing', the first law re-written to better parallel the existing 'Law of Gearing" as pioneered by Leonard Euler, expanded from Euler's original law to encompass non-circular gears and hypoid gears, the 2nd law of gearing describing a unique relat

  17. From geometry to topology

    CERN Document Server

    Flegg, H Graham

    2001-01-01

    This excellent introduction to topology eases first-year math students and general readers into the subject by surveying its concepts in a descriptive and intuitive way, attempting to build a bridge from the familiar concepts of geometry to the formalized study of topology. The first three chapters focus on congruence classes defined by transformations in real Euclidean space. As the number of permitted transformations increases, these classes become larger, and their common topological properties become intuitively clear. Chapters 4-12 give a largely intuitive presentation of selected topics.

  18. Geometry of conics

    CERN Document Server

    Akopyan, A V

    2007-01-01

    The book is devoted to the properties of conics (plane curves of second degree) that can be formulated and proved using only elementary geometry. Starting with the well-known optical properties of conics, the authors move to less trivial results, both classical and contemporary. In particular, the chapter on projective properties of conics contains a detailed analysis of the polar correspondence, pencils of conics, and the Poncelet theorem. In the chapter on metric properties of conics the authors discuss, in particular, inscribed conics, normals to conics, and the Poncelet theorem for confoca

  19. Geometry I essentials

    CERN Document Server

    REA, The Editors of

    2012-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Geometry I includes methods of proof, points, lines, planes, angles, congruent angles and line segments, triangles, parallelism, quadrilaterals, geometric inequalities, and geometric

  20. Thermodynamic Geometry and Extremal Black Holes in String Theory

    CERN Document Server

    Sarkar, Tapobrata; Tiwari, Bhupendra Nath

    2008-01-01

    We study a generalisation of thermodynamic geometry to degenerate quantum ground states at zero temperatures exemplified by charged extremal black holes in type II string theories. Several examples of extremal charged black holes with non degenerate thermodynamic geometries and finite but non zero state space scalar curvatures are established. These include black holes described by D1-D5-P and D2-D6-NS5-P brane systems and also two charged small black holes in Type II string theories. We also explore the modifications to the state space geometry and the scalar curvature due to the higher derivative contributions and string loop corrections as well as an exact entropy expression from quantum information theory. Our construction describes state space geometries arising out of a possible limiting thermodynamic characterisation of degenerate quantum ground states at zero temperatures.

  1. Conference on Complex Geometry and Mirror Symmetry

    CERN Document Server

    Vinet, Luc; Yau, Shing-Tung; Mirror Symmetry III

    1999-01-01

    This book presents surveys from a workshop held during the theme year in geometry and topology at the Centre de recherches mathématiques (CRM, University of Montréal). The volume is in some sense a sequel to Mirror Symmetry I (1998) and Mirror Symmetry II (1996), copublished by the AMS and International Press. Included are recent developments in the theory of mirror manifolds and the related areas of complex and symplectic geometry. The long introductory articles explain the key physical ideas and motivation, namely conformal field theory, supersymmetry, and string theory. Open problems are emphasized. Thus the book provides an efficient way for a very broad audience of mathematicians and physicists to reach the frontier of research in this fast expanding area. - See more at: http://bookstore.ams.org/amsip-10#sthash.DbxEFJDx.dpuf

  2. Linear geometry thyratron

    Science.gov (United States)

    Byron, S.

    1985-03-01

    The low pressure gas-filled thyratron is scalable in the long dimension. Internally the tube is formed as a tetrode, with an auxiliary grid placed between the cathode and the control grid. A dc or pulsed power source drives the auxiliary grid both to insure uniform cathode emission and to provide a grid-cathode plasma prior to commutation. The high voltage holdoff structure consists of the anode, the control grid and its electrostatic shielding baffles, and a main quartz insulator. A small gas flow supply and exhaust system is used that eliminates the need for a hydrogen reservoir and permits other gases, such as helium, to be used. The thyratron provides a low inductance, high current, long lifetime switch configuration: useful for switch-on applications involving large scale lasers and other similar loads that are distributed in a linear geometry.

  3. Critique of information geometry

    Energy Technology Data Exchange (ETDEWEB)

    Skilling, John, E-mail: skilling@eircom.net [Maximum Entropy Data Consultants Ltd, Kenmare (Ireland)

    2014-12-05

    As applied to probability, information geometry fails because probability distributions do not form a metric space. Probability theory rests on a compelling foundation of elementary symmetries, which also support information (aka minus entropy, Kullback-Leibler) H(p;q) as the unique measure of divergence from source probability distribution q to destination p. Because the only compatible connective H is from≠to asymmetric, H(p;q)≠H(q;p), there can be no compatible geometrical distance (which would necessarily be from=to symmetric). Hence there is no distance relationship compatible with the structure of probability theory. Metrics g and densities sqrt(det(g)) interpreted as prior probabilities follow from the definition of distance, and must fail likewise. Various metrics and corresponding priors have been proposed, Fisher's being the most popular, but all must behave unacceptably. This is illustrated with simple counter-examples.

  4. Real algebraic geometry

    CERN Document Server

    Bochnak, Jacek; Roy, Marie-Françoise

    1998-01-01

    This book is a systematic treatment of real algebraic geometry, a subject that has strong interrelation with other areas of mathematics: singularity theory, differential topology, quadratic forms, commutative algebra, model theory, complexity theory etc. The careful and clearly written account covers both basic concepts and up-to-date research topics. It may be used as text for a graduate course. The present edition is a substantially revised and expanded English version of the book "Géometrie algébrique réelle" originally published in French, in 1987, as Volume 12 of ERGEBNISSE. Since the publication of the French version the theory has made advances in several directions. Many of these are included in this English version. Thus the English book may be regarded as a completely new treatment of the subject.

  5. Covariant Macroscopic Quantum Geometry

    CERN Document Server

    Hogan, Craig J

    2012-01-01

    A covariant noncommutative algebra of position operators is presented, and interpreted as the macroscopic limit of a geometry that describes a collective quantum behavior of the positions of massive bodies in a flat emergent space-time. The commutator defines a quantum-geometrical relationship between world lines that depends on their separation and relative velocity, but on no other property of the bodies, and leads to a transverse uncertainty of the geometrical wave function that increases with separation. The number of geometrical degrees of freedom in a space-time volume scales holographically, as the surface area in Planck units. Ongoing branching of the wave function causes fluctuations in transverse position, shared coherently among bodies with similar trajectories. The theory can be tested using appropriately configured Michelson interferometers.

  6. Advanced geometries and regimes

    Science.gov (United States)

    Bulanov, S. S.; Bulanov, S. V.; Turchetti, G.; Limpouch, J.; Klimo, O.; Psikal, J.; Stockem, A.; Fiuza, F.; Silva, L. O.; Antici, P.; Margarone, D.; Korn, G.

    2013-08-01

    We review and discuss different schemes of laser ion acceleration as well as advanced target geometries in connection with the development of the laser-driven proton source for hadron therapy of oncological diseases, which is a part of the ELIMED project. At the request of the Proceedings Editors and Dr. Stepan Bulanov, University of California, Berkeley, the above article has been updated to include three additional authors: A. Stockem, F. Fiuza, and L. O. Silva. All additional authors have consented to their name being added to the paper. Furthermore, the updated article PDF contains amendments to a number of references as detailed within the pages attached to the end of the updated article PDF file. The updated article was re-published on 8 August 2013.

  7. Magnetism in curved geometries

    Science.gov (United States)

    Streubel, Robert; Fischer, Peter; Kronast, Florian; Kravchuk, Volodymyr P.; Sheka, Denis D.; Gaididei, Yuri; Schmidt, Oliver G.; Makarov, Denys

    2016-09-01

    Extending planar two-dimensional structures into the three-dimensional space has become a general trend in multiple disciplines, including electronics, photonics, plasmonics and magnetics. This approach provides means to modify conventional or to launch novel functionalities by tailoring the geometry of an object, e.g. its local curvature. In a generic electronic system, curvature results in the appearance of scalar and vector geometric potentials inducing anisotropic and chiral effects. In the specific case of magnetism, even in the simplest case of a curved anisotropic Heisenberg magnet, the curvilinear geometry manifests two exchange-driven interactions, namely effective anisotropy and antisymmetric exchange, i.e. Dzyaloshinskii-Moriya-like interaction. As a consequence, a family of novel curvature-driven effects emerges, which includes magnetochiral effects and topologically induced magnetization patterning, resulting in theoretically predicted unlimited domain wall velocities, chirality symmetry breaking and Cherenkov-like effects for magnons. The broad range of altered physical properties makes these curved architectures appealing in view of fundamental research on e.g. skyrmionic systems, magnonic crystals or exotic spin configurations. In addition to these rich physics, the application potential of three-dimensionally shaped objects is currently being explored as magnetic field sensorics for magnetofluidic applications, spin-wave filters, advanced magneto-encephalography devices for diagnosis of epilepsy or for energy-efficient racetrack memory devices. These recent developments ranging from theoretical predictions over fabrication of three-dimensionally curved magnetic thin films, hollow cylinders or wires, to their characterization using integral means as well as the development of advanced tomography approaches are in the focus of this review.

  8. Noncommutative algebra and geometry

    CERN Document Server

    De Concini, Corrado; Vavilov, Nikolai 0

    2005-01-01

    Finite Galois Stable Subgroups of Gln. Derived Categories for Nodal Rings and Projective Configurations. Crowns in Profinite Groups and Applications. The Galois Structure of Ambiguous Ideals in Cyclic Extensions of Degree 8. An Introduction to Noncommutative Deformations of Modules. Symmetric Functions, Noncommutative Symmetric Functions and Quasisymmetric Functions II. Quotient Grothendieck Representations. On the Strong Rigidity of Solvable Lie Algebras. The Role of Bergman in Invesigating Identities in Matrix Algebras with Symplectic Involution. The Triangular Structure of Ladder Functors.

  9. Higher geometry an introduction to advanced methods in analytic geometry

    CERN Document Server

    Woods, Frederick S

    2005-01-01

    For students of mathematics with a sound background in analytic geometry and some knowledge of determinants, this volume has long been among the best available expositions of advanced work on projective and algebraic geometry. Developed from Professor Woods' lectures at the Massachusetts Institute of Technology, it bridges the gap between intermediate studies in the field and highly specialized works.With exceptional thoroughness, it presents the most important general concepts and methods of advanced algebraic geometry (as distinguished from differential geometry). It offers a thorough study

  10. Biologically active new Fe(II, Co(II, Ni(II, Cu(II, Zn(II and Cd(II complexes of N-(2-thienylmethylenemethanamine

    Directory of Open Access Journals (Sweden)

    C. SPÎNU

    2008-04-01

    Full Text Available Iron(II, cobalt(II, nickel (II, copper (II, zinc(II and cadmium(II complexes of the type ML2Cl2, where M is a metal and L is the Schiff base N-(2-thienylmethylenemethanamine (TNAM formed by the condensation of 2-thiophenecarboxaldehyde and methylamine, were prepared and characterized by elemental analysis as well as magnetic and spectroscopic measurements. The elemental analyses suggest the stoichiometry to be 1:2 (metal:ligand. Magnetic susceptibility data coupled with electronic, ESR and Mössbauer spectra suggest a distorted octahedral structure for the Fe(II, Co(II and Ni(II complexes, a square-planar geometry for the Cu(II compound and a tetrahedral geometry for the Zn(II and Cd(II complexes. The infrared and NMR spectra of the complexes agree with co-ordination to the central metal atom through nitrogen and sulphur atoms. Conductance measurements suggest the non-electrolytic nature of the complexes, except for the Cu(II, Zn(II and Cd(II complexes, which are 1:2 electrolytes. The Schiff base and its metal chelates were screened for their biological activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa and the metal chelates were found to possess better antibacterial activity than that of the uncomplexed Schiff base.

  11. An introduction to incidence geometry

    CERN Document Server

    De Bruyn, Bart

    2016-01-01

    This book gives an introduction to the field of Incidence Geometry by discussing the basic families of point-line geometries and introducing some of the mathematical techniques that are essential for their study. The families of geometries covered in this book include among others the generalized polygons, near polygons, polar spaces, dual polar spaces and designs. Also the various relationships between these geometries are investigated. Ovals and ovoids of projective spaces are studied and some applications to particular geometries will be given. A separate chapter introduces the necessary mathematical tools and techniques from graph theory. This chapter itself can be regarded as a self-contained introduction to strongly regular and distance-regular graphs. This book is essentially self-contained, only assuming the knowledge of basic notions from (linear) algebra and projective and affine geometry. Almost all theorems are accompanied with proofs and a list of exercises with full solutions is given at the end...

  12. Generalized geometry of two-dimensional vacua

    CERN Document Server

    Rosa, Dario

    2013-01-01

    We derive the conditions for unbroken supersymmetry for a Mink_2, (2,0) vacuum, arising from Type II supergravity on a compact eight-dimensional manifold M_8. When specialized to internal manifolds enjoying SU(4)xSU(4) structure the resulting system is elegantly rewritten in terms of generalized complex geometry. This particular class of vacua violates the correspondence between supersymmetry conditions and calibrations conditions of D branes (supersymmetry-calibrations correspondence). Our analysis includes and extends previous results about the failure of the supersymmetry-calibrations correspondence, and confirms the existence of a precise relation between such a failure and a subset of the supersymmetry conditions.

  13. Guide to Computational Geometry Processing

    DEFF Research Database (Denmark)

    Bærentzen, Jakob Andreas; Gravesen, Jens; Anton, François;

    be processed before it is useful. This Guide to Computational Geometry Processing reviews the algorithms for processing geometric data, with a practical focus on important techniques not covered by traditional courses on computer vision and computer graphics. This is balanced with an introduction......, metric space, affine spaces, differential geometry, and finite difference methods for derivatives and differential equations Reviews geometry representations, including polygonal meshes, splines, and subdivision surfaces Examines techniques for computing curvature from polygonal meshes Describes...

  14. Linear algebra and projective geometry

    CERN Document Server

    Baer, Reinhold

    2005-01-01

    Geared toward upper-level undergraduates and graduate students, this text establishes that projective geometry and linear algebra are essentially identical. The supporting evidence consists of theorems offering an algebraic demonstration of certain geometric concepts. These focus on the representation of projective geometries by linear manifolds, of projectivities by semilinear transformations, of collineations by linear transformations, and of dualities by semilinear forms. These theorems lead to a reconstruction of the geometry that constituted the discussion's starting point, within algebra

  15. Finding Proofs in Tarskian Geometry

    OpenAIRE

    Beeson, Michael; Wos, Larry

    2016-01-01

    We report on a project to use a theorem prover to find proofs of the theorems in Tarskian geometry. These theorems start with fundamental properties of betweenness, proceed through the derivations of several famous theorems due to Gupta and end with the derivation from Tarski's axioms of Hilbert's 1899 axioms for geometry. They include the four challenge problems left unsolved by Quaife, who two decades ago found some \\Otter proofs in Tarskian geometry (solving challenges issued in Wos's 1998...

  16. Phase structures in fuzzy geometries

    CERN Document Server

    Govindarajan, T R; Gupta, K S; Martin, X

    2012-01-01

    We study phase structures of quantum field theories in fuzzy geometries. Several examples of fuzzy geometries as well as QFT's on such geometries are considered. They are fuzzy spheres and beyond as well as noncommutative deformations of BTZ blackholes. Analysis is done analytically and through simulations. Several features like novel stripe phases as well as spontaneous symmetry breaking avoiding Colemen, Mermin, Wagner theorem are brought out. Also we establish that these phases are stable due to topological obstructions.

  17. Thermodynamics of Asymptotically Conical Geometries.

    Science.gov (United States)

    Cvetič, Mirjam; Gibbons, Gary W; Saleem, Zain H

    2015-06-12

    We study the thermodynamical properties of a class of asymptotically conical geometries known as "subtracted geometries." We derive the mass and angular momentum from the regulated Komar integral and the Hawking-Horowitz prescription and show that they are equivalent. By deriving the asymptotic charges, we show that the Smarr formula and the first law of thermodynamics hold. We also propose an analog of Christodulou-Ruffini inequality. The analysis can be generalized to other asymptotically conical geometries.

  18. Planetary Image Geometry Library

    Science.gov (United States)

    Deen, Robert C.; Pariser, Oleg

    2010-01-01

    The Planetary Image Geometry (PIG) library is a multi-mission library used for projecting images (EDRs, or Experiment Data Records) and managing their geometry for in-situ missions. A collection of models describes cameras and their articulation, allowing application programs such as mosaickers, terrain generators, and pointing correction tools to be written in a multi-mission manner, without any knowledge of parameters specific to the supported missions. Camera model objects allow transformation of image coordinates to and from view vectors in XYZ space. Pointing models, specific to each mission, describe how to orient the camera models based on telemetry or other information. Surface models describe the surface in general terms. Coordinate system objects manage the various coordinate systems involved in most missions. File objects manage access to metadata (labels, including telemetry information) in the input EDRs and RDRs (Reduced Data Records). Label models manage metadata information in output files. Site objects keep track of different locations where the spacecraft might be at a given time. Radiometry models allow correction of radiometry for an image. Mission objects contain basic mission parameters. Pointing adjustment ("nav") files allow pointing to be corrected. The object-oriented structure (C++) makes it easy to subclass just the pieces of the library that are truly mission-specific. Typically, this involves just the pointing model and coordinate systems, and parts of the file model. Once the library was developed (initially for Mars Polar Lander, MPL), adding new missions ranged from two days to a few months, resulting in significant cost savings as compared to rewriting all the application programs for each mission. Currently supported missions include Mars Pathfinder (MPF), MPL, Mars Exploration Rover (MER), Phoenix, and Mars Science Lab (MSL). Applications based on this library create the majority of operational image RDRs for those missions. A

  19. Digital geometry in image processing

    CERN Document Server

    Mukhopadhyay, Jayanta

    2013-01-01

    Exploring theories and applications developed during the last 30 years, Digital Geometry in Image Processing presents a mathematical treatment of the properties of digital metric spaces and their relevance in analyzing shapes in two and three dimensions. Unlike similar books, this one connects the two areas of image processing and digital geometry, highlighting important results of digital geometry that are currently used in image analysis and processing. The book discusses different digital geometries in multi-dimensional integral coordinate spaces. It also describes interesting properties of

  20. Initiation to global Finslerian geometry

    CERN Document Server

    Akbar-Zadeh, Hassan

    2006-01-01

    After a brief description of the evolution of thinking on Finslerian geometry starting from Riemann, Finsler, Berwald and Elie Cartan, the book gives a clear and precise treatment of this geometry. The first three chapters develop the basic notions and methods, introduced by the author, to reach the global problems in Finslerian Geometry. The next five chapters are independent of each other, and deal with among others the geometry of generalized Einstein manifolds, the classification of Finslerian manifolds of constant sectional curvatures. They also give a treatment of isometric, affine, p

  1. Null twisted geometries

    CERN Document Server

    Speziale, Simone

    2013-01-01

    We define and investigate a quantisation of null hypersurfaces in the context of loop quantum gravity on a fixed graph. The main tool we use is the parametrisation of the theory in terms of twistors, which has already proved useful in discussing the interpretation of spin networks as the quantization of twisted geometries. The classical formalism can be extended in a natural way to null hypersurfaces, with the Euclidean polyhedra replaced by null polyhedra with space-like faces, and SU(2) by the little group ISO(2). The main difference is that the simplicity constraints present in the formalims are all first class, and the symplectic reduction selects only the helicity subgroup of the little group. As a consequence, information on the shapes of the polyhedra is lost, and the result is a much simpler, abelian geometric picture. It can be described by an Euclidean singular structure on the 2-dimensional space-like surface defined by a foliation of space-time by null hypersurfaces. This geometric structure is na...

  2. Matrix Information Geometry

    CERN Document Server

    Bhatia, Rajendra

    2013-01-01

    This book is an outcome of the Indo-French Workshop on Matrix Information Geometries (MIG): Applications in Sensor and Cognitive Systems Engineering, which was held in Ecole Polytechnique and Thales Research and Technology Center, Palaiseau, France, in February 23-25, 2011. The workshop was generously funded by the Indo-French Centre for the Promotion of Advanced Research (IFCPAR).  During the event, 22 renowned invited french or indian speakers gave lectures on their areas of expertise within the field of matrix analysis or processing. From these talks, a total of 17 original contribution or state-of-the-art chapters have been assembled in this volume. All articles were thoroughly peer-reviewed and improved, according to the suggestions of the international referees. The 17 contributions presented  are organized in three parts: (1) State-of-the-art surveys & original matrix theory work, (2) Advanced matrix theory for radar processing, and (3) Matrix-based signal processing applications.  

  3. Functional integration over geometries

    CERN Document Server

    Mottola, E

    1995-01-01

    The geometric construction of the functional integral over coset spaces {\\cal M}/{\\cal G} is reviewed. The inner product on the cotangent space of infinitesimal deformations of \\cal M defines an invariant distance and volume form, or functional integration measure on the full configuration space. Then, by a simple change of coordinates parameterizing the gauge fiber \\cal G, the functional measure on the coset space {\\cal M}/{\\cal G} is deduced. This change of integration variables leads to a Jacobian which is entirely equivalent to the Faddeev-Popov determinant of the more traditional gauge fixed approach in non-abelian gauge theory. If the general construction is applied to the case where \\cal G is the group of coordinate reparametrizations of spacetime, the continuum functional integral over geometries, {\\it i.e.} metrics modulo coordinate reparameterizations may be defined. The invariant functional integration measure is used to derive the trace anomaly and effective action for the conformal part of the me...

  4. Coframe geometry and gravity

    CERN Document Server

    Itin, Yakov

    2007-01-01

    The possible extensions of GR for description of fermions on a curved space, for supergravity and for loop quantum gravity require a richer set of 16 independent variables. These variables can be assembled in a coframe field, i.e., a local set of four linearly independent 1-forms. In the ordinary formulation, the coframe gravity does not have any connection to a specific geometry even being constructed from the geometrical meaningful objects. A geometrization of the coframe gravity is an aim of this paper. We construct a complete class of the coframe connections which are linear in the first order derivatives of the coframe field on an $n$ dimensional manifolds with and without a metric. The subclasses of the torsion-free, metric-compatible and flat connections are derived. We also study the behavior of the geometrical structures under local transformations of the coframe. The remarkable fact is an existence of a subclass of connections which are invariant when the infinitesimal transformations satisfy the Ma...

  5. Ostrich eggs geometry

    Directory of Open Access Journals (Sweden)

    Šárka Nedomová

    2013-01-01

    Full Text Available Precise quantification of the profile of egg can provide a powerful tool for the analysis of egg shape for various biological problems. A new approach to the geometry of a Ostrich’s egg profile is presented here using an analysing the egg’s digital photo by edge detection techniques. The obtained points on the eggshell counter are fitted by the Fourier series. The obtained equations describing an egg profile have been used to calculate radii of curvature. The radii of the curvature at the important point of the egg profile (sharp end, blunt end and maximum thickness are independent on the egg shape index. The exact values of the egg surface and the egg volume have been obtained. These quantities are also independent on the egg shape index. These quantities can be successively estimated on the basis of simplified equations which are expressed in terms of the egg length, L¸ and its width, B. The surface area of the eggshells also exhibits good correlation with the egg long circumference length. Some limitations of the most used procedures have been also shown.

  6. Geometries from field theories

    Science.gov (United States)

    Aoki, Sinya; Kikuchi, Kengo; Onogi, Tetsuya

    2015-10-01

    We propose a method to define a d+1-dimensional geometry from a d-dimensional quantum field theory in the 1/N expansion. We first construct a d+1-dimensional field theory from the d-dimensional one via the gradient-flow equation, whose flow time t represents the energy scale of the system such that trArr 0 corresponds to the ultraviolet and trArr infty to the infrared. We then define the induced metric from d+1-dimensional field operators. We show that the metric defined in this way becomes classical in the large-N limit, in the sense that quantum fluctuations of the metric are suppressed as 1/N due to the large-N factorization property. As a concrete example, we apply our method to the O(N) nonlinear σ model in two dimensions. We calculate the 3D induced metric, which is shown to describe an anti-de Sitter space in the massless limit. Finally, we discuss several open issues for future studies.

  7. Optimum Stirling engine geometry

    Energy Technology Data Exchange (ETDEWEB)

    Senft, J.R. [University of Wisconsin, River Walls, WI (United States). Mathematics Dept.

    2002-07-01

    This paper combines the author's work on mechanical efficiency of reciprocating engines with the classic Schmidt thermodynamic model for Stirling engines and revisits the problem of identifying optimal engine geometry. All previous optimizations using the Schmidt theory focused on obtaining a maximal specific indicated cyclic work. This does not necessarily produce the highest shaft output. Indeed, some optima based upon indicated work would yield engines that cannot run at all due to excessive intrinsic mechanical losses. The analysis presented in this paper shows how to optimize for shaft or brake work output. Specifically, it presents solutions to the problem of finding the piston-to-displacer swept volume ratio and phase angle which will give the maximum brake output for a given total swept volume, given temperature extremes, a given mean operating pressure, and a given engine mechanism effectiveness. The paper covers the split-cylinder or gamma-type Stirling in detail, serving as a model for similar analysis of the other Stirling engine configurations. (author)

  8. Surrogate Modeling for Geometry Optimization

    DEFF Research Database (Denmark)

    Rojas Larrazabal, Marielba de la Caridad; Abraham, Yonas; Holzwarth, Natalie;

    2009-01-01

    A new approach for optimizing the nuclear geometry of an atomic system is described. Instead of the original expensive objective function (energy functional), a small number of simpler surrogates is used.......A new approach for optimizing the nuclear geometry of an atomic system is described. Instead of the original expensive objective function (energy functional), a small number of simpler surrogates is used....

  9. Analytic Geometry, A Tentative Guide.

    Science.gov (United States)

    Helwig, G. Alfred; And Others

    This teacher's guide for a semester course in analytic geometry is based on the text "Analytic Geometry" by W. K. Morrill. Included is a daily schedule of suggested topics and homework assignments. Specific teaching hints are also given. The content of the course includes point and plane vectors, straight lines, point and space vectors, planes,…

  10. Light, Matter, and Geometry

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall

    Interaction of light and matter produces the appearance of materials. To deal with the immense complexity of nature, light and matter is modelled at a macroscopic level in computer graphics. This work is the first to provide the link between the microscopic physical theories of light and matter...... of a material and determine the contents of the material. The book is in four parts. Part I provides the link between microscopic and macroscopic theories of light. Part II describes how to use the properties of microscopic particles to compute the macroscopic properties of materials. Part III illustrates...... that we can use geometrical models to handle the large number of variables which appear when we construct appearance models from microscopic theories. Finally, Part IV provides detailed appearance models for natural water, ice, and milk to demonstrate how the theory is applied....

  11. Basic algebraic geometry, v.2

    CERN Document Server

    Shafarevich, Igor Rostislavovich

    1994-01-01

    Shafarevich Basic Algebraic Geometry 2 The second edition of Shafarevich's introduction to algebraic geometry is in two volumes. The second volume covers schemes and complex manifolds, generalisations in two different directions of the affine and projective varieties that form the material of the first volume. Two notable additions in this second edition are the section on moduli spaces and representable functors, motivated by a discussion of the Hilbert scheme, and the section on Kähler geometry. The book ends with a historical sketch discussing the origins of algebraic geometry. From the Zentralblatt review of this volume: "... one can only respectfully repeat what has been said about the first part of the book (...): a great textbook, written by one of the leading algebraic geometers and teachers himself, has been reworked and updated. As a result the author's standard textbook on algebraic geometry has become even more important and valuable. Students, teachers, and active researchers using methods of al...

  12. Index Theorems on Torsional Geometries

    CERN Document Server

    Kimura, Tetsuji

    2007-01-01

    We study various topological invariants on a differential geometry in the presence of a totally anti-symmetric torsion H under the closed condition dH=0. By using the identification between the Clifford algebra on a geometry and the canonical quantization condition of fermion in the quantum mechanics, we construct the N=1 quantum mechanical sigma model in the Hamiltonian formalism and extend this model to N=2 system, equipped with the totally anti-symmetric tensor associated with the torsion on the target space geometry. Next we construct transition elements in the Lagrangian path integral formalism and apply them to the analyses of the Witten indices in supersymmetric systems. We improve the formulation of the Dirac index on the torsional geometry which has already been studied. We also formulate the Euler characteristic and the Hirzebruch signature on the torsional geometry.

  13. The Application of Mechanics to Geometry. Popular Lectures in Mathematics.

    Science.gov (United States)

    Kogan, B. Yu

    Presented in this translation are three chapters. Chapter I discusses the composition of forces and several theorems of geometry are proved using the fundamental concepts and certain laws of statics. Chapter II discusses the perpetual motion postulate; several geometric theorems are proved using the postulate that perpetual motion is impossible.…

  14. D-branes and Azumaya/matrix noncommutative differential geometry,II: Azumaya/matrix supermanifolds and differentiable maps therefrom -- with a view toward dynamical fermionic D-branes in string theory

    CERN Document Server

    Liu, Chien-Hao

    2014-01-01

    In this Part II of D(11), we introduce new objects: super-$C^k$-schemes and Azumaya super-$C^k$-manifolds with a fundamental module (or, synonymously, matrix super-$C^k$-manifolds with a fundamental module), and extend the study in D(11.1) ([L-Y3], arXiv:1406.0929 [math.DG]) to define the notion of `differentiable maps from an Azumaya/matrix supermanifold with a fundamental module to a real manifold or supermanifold'. This allows us to introduce the notion of `fermionic D-branes' in two different styles, one parallels Ramond-Neveu-Schwarz fermionic string and the other Green-Schwarz fermionic string. A more detailed discussion on the Higgs mechanism on dynamical D-branes in our setting, taking maps from the D-brane world-volume to the space-time in question and/or sections of the Chan-Paton bundle on the D-brane world-volume as Higgs fields, is also given for the first time in the D-project. Finally note that mathematically string theory begins with the notion of a differentiable map from a string world-sheet...

  15. The Geometry Description Markup Language

    Institute of Scientific and Technical Information of China (English)

    RadovanChytracek

    2001-01-01

    Currently,a lot of effort is being put on designing complex detectors.A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier.A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment.However,no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files,source code (C/C++/FORTRAN),to XML and database solutions.The XML(Extensible Markup Language)has proven to provide an interesting approach for describing detector geometries,with several different but incompatible XML-based solutions existing.Therefore,interoperability and geometry data exchange among different frameworks is not possible at present.This article introduces a markup language for geometry descriptions.Its aim is to define a common approach for sharing and exchanging of geometry description data.Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML.

  16. Hamilton geometry: Phase space geometry from modified dispersion relations

    CERN Document Server

    Barcaroli, Leonardo; Gubitosi, Giulia; Loret, Niccoló; Pfeifer, Christian

    2015-01-01

    We describe the Hamilton geometry of the phase space of particles whose motion is characterised by general dispersion relations. In this framework spacetime and momentum space are naturally curved and intertwined, allowing for a simultaneous description of both spacetime curvature and non-trivial momentum space geometry. We consider as explicit examples two models for Planck-scale modified dispersion relations, inspired from the $q$-de Sitter and $\\kappa$-Poincar\\'e quantum groups. In the first case we find the expressions for the momentum and position dependent curvature of spacetime and momentum space, while for the second case the manifold is flat and only the momentum space possesses a nonzero, momentum dependent curvature. In contrast, for a dispersion relation that is induced by a spacetime metric, as in General Relativity, the Hamilton geometry yields a flat momentum space and the usual curved spacetime geometry with only position dependent geometric objects.

  17. Geometry and W-Gravity

    OpenAIRE

    Hull, C. M.

    1993-01-01

    The higher-spin geometries of $W_\\infty$-gravity and $W_N$-gravity are analysed and used to derive the complete non-linear structure of the coupling to matter and its symmetries. The symmetry group is a subgroup of the symplectic diffeomorphisms of the cotangent bundle of the world-sheet, and the $W_N$ geometry is obtained from a non-linear truncation of the $W_\\infty$ geometry. Quantum W-gravity is briefly discussed. (Talk given at {\\it Pathways to Fundamental Interactions}, the 16th John Ho...

  18. Linear algebra, geometry and transformation

    CERN Document Server

    Solomon, Bruce

    2014-01-01

    Vectors, Mappings and Linearity Numeric Vectors Functions Mappings and Transformations Linearity The Matrix of a Linear Transformation Solving Linear Systems The Linear SystemThe Augmented Matrix and RRE Form Homogeneous Systems in RRE Form Inhomogeneous Systems in RRE Form The Gauss-Jordan Algorithm Two Mapping Answers Linear Geometry Geometric Vectors Geometric/Numeric Duality Dot-Product Geometry Lines, Planes, and Hyperplanes System Geometry and Row/Column Duality The Algebra of Matrices Matrix Operations Special Matrices Matrix Inversion A Logical Digression The Logic of the Inversion Alg

  19. A first course in geometry

    CERN Document Server

    Walsh, Edward T

    2014-01-01

    This introductory text is designed to help undergraduate students develop a solid foundation in geometry. Early chapters progress slowly, cultivating the necessary understanding and self-confidence for the more rapid development that follows. The extensive treatment can be easily adapted to accommodate shorter courses. Starting with the language of mathematics as expressed in the algebra of logic and sets, the text covers geometric sets of points, separation and angles, triangles, parallel lines, similarity, polygons and area, circles, space geometry, and coordinate geometry. Each chapter incl

  20. Head First 2D Geometry

    CERN Document Server

    Fallow), Stray

    2009-01-01

    Having trouble with geometry? Do Pi, The Pythagorean Theorem, and angle calculations just make your head spin? Relax. With Head First 2D Geometry, you'll master everything from triangles, quads and polygons to the time-saving secrets of similar and congruent angles -- and it'll be quick, painless, and fun. Through entertaining stories and practical examples from the world around you, this book takes you beyond boring problems. You'll actually use what you learn to make real-life decisions, like using angles and parallel lines to crack a mysterious CSI case. Put geometry to work for you, and

  1. A new look at geometry

    CERN Document Server

    Adler, Irving

    1967-01-01

    This richly detailed overview surveys the development and evolution of geometrical ideas and concepts from ancient times to the present. In addition to the relationship between physical and mathematical spaces, it examines the interactions of geometry, algebra, and calculus. The text proves many significant theorems and employs several important techniques. Chapters on non- Euclidean geometry and projective geometry form brief, self-contained treatments.More than 100 exercises with answers and 200 diagrams illuminate the text. Teachers, students (particularly those majoring in mathematics educa

  2. CATIA-GDML geometry builder

    Science.gov (United States)

    Belogurov, S.; Berchun, Yu; Chernogorov, A.; Malzacher, P.; Ovcharenko, E.; Semennikov, A.

    2011-12-01

    Due to conceptual difference between geometry descriptions in Computer-Aided Design (CAD) systems and particle transport Monte Carlo (MC) codes direct conversion of detector geometry in either direction is not feasible. An original set of tools has been developed for building a GEANT4/ROOT compatible geometry in the CATIA CAD system and exchanging it with mentioned MC packages using GDML file format. A Special structure of a CATIA product tree, a wide range of primitives, different types of multiple volume instantiation, and supporting macros have been implemented.

  3. Quantum Consequences of Parameterizing Geometry

    Science.gov (United States)

    Wanas, M. I.

    2002-12-01

    The marriage between geometrization and quantization is not successful, so far. It is well known that quantization of gravity , using known quantization schemes, is not satisfactory. It may be of interest to look for another approach to this problem. Recently, it is shown that geometries with torsion admit quantum paths. Such geometries should be parameterizied in order to preserve the quantum properties appeared in the paths. The present work explores the consequences of parameterizing such geometry. It is shown that quantum properties, appeared in the path equations, are transferred to other geometric entities.

  4. Geometry and W-Gravity

    CERN Document Server

    Hull, C M

    1993-01-01

    The higher-spin geometries of $W_\\infty$-gravity and $W_N$-gravity are analysed and used to derive the complete non-linear structure of the coupling to matter and its symmetries. The symmetry group is a subgroup of the symplectic diffeomorphisms of the cotangent bundle of the world-sheet, and the $W_N$ geometry is obtained from a non-linear truncation of the $W_\\infty$ geometry. Quantum W-gravity is briefly discussed. (Talk given at {\\it Pathways to Fundamental Interactions}, the 16th John Hopkins Workshop on Current Problems in Particle Theory, Gothenborg, 1992.)

  5. Thermal Phase in Bubbling Geometries

    Institute of Scientific and Technical Information of China (English)

    LIU Chang-Yong

    2008-01-01

    We use matrix model to study thermal phase in bubbling half-BPS type IIB geometries with SO(4)×SO(4) symmetry.Near the horizon limit,we find that thermal vacua of bubbling geometries have disjoint parts,and each part is one kind of phase of the thermal system.We connect the thermal dynamics of bubbling geometries with one-dimensional fermions thermal system.Finally,we try to give a new possible way to resolve information loss puzzle.

  6. An improved combinatorial geometry model for arbitrary geometry in DSMC

    Science.gov (United States)

    Kargaran, H.; Minuchehr, A.; Zolfaghari, A.

    2017-03-01

    This paper focuses on a new direct simulation Monte Carlo (DSMC) code based on combinatorial geometry (CG) for simulation of any rarefied gas flow. The developed code, called DgSMC-A, has been supplied with an improved CG modeling able to significantly optimize the particle-tracking process, resulting in a highly reduced runtime compared to the conventional codes. The improved algorithm inserts a grid over the geometry and saves those grid elements containing some part of the geometry border. Since only a small part of a grid is engaged with the geometry border, significant time can be saved using the proposed algorithm. Embedding the modified algorithm in the DgSMC-A resulted in a fast, robust and self-governing code needless to any mesh generator. The code completely handles complex geometries created with first-and second-order surfaces. In addition, we developed a new surface area calculator in the CG methodology for complex geometries based on the Monte Carlo method with acceptable accuracy. Several well-known test cases are examined to indicate the code ability to deal with a wide range of realistic problems. Results are also found to be in good agreement with references and experimental data.

  7. Dianilinedichloridozinc(II

    Directory of Open Access Journals (Sweden)

    Islam Ullah Khan

    2010-05-01

    Full Text Available In the title compound, [ZnCl2(C6H7N2], the ZnII ion (site symmetry 2 adopts a near-regular tetrahedral ZnN2Cl2 coordination geometry. In the crystal, molecules are linked by N—H...Cl hydrogen bonds, generating (100 sheets containing R22(8 loops.

  8. Hyperbolic Metamaterials with Complex Geometry

    DEFF Research Database (Denmark)

    Lavrinenko, Andrei; Andryieuski, Andrei; Zhukovsky, Sergei

    2016-01-01

    We investigate new geometries of hyperbolic metamaterialssuch as highly corrugated structures, nanoparticle monolayer assemblies, super-structured or vertically arranged multilayersand nanopillars. All structures retain basic propertiesof hyperbolic metamaterials, but have functionality improved...

  9. Instability of supersymmetric microstate geometries

    CERN Document Server

    Eperon, Felicity C; Santos, Jorge E

    2016-01-01

    We investigate the classical stability of supersymmetric, asymptotically flat, microstate geometries with five non-compact dimensions. Such geometries admit an "evanescent ergosurface": a timelike hypersurface of infinite redshift. On such a surface, there are null geodesics with zero energy relative to infinity. These geodesics are stably trapped in the potential well near the ergosurface. We present a heuristic argument indicating that this feature is likely to lead to a nonlinear instability of these solutions. We argue that the precursor of such an instability can be seen in the behaviour of linear perturbations: nonlinear stability would require that all linear perturbations decay sufficiently rapidly but the stable trapping implies that some linear perturbation decay very slowly. We study this in detail for the most symmetric microstate geometries. By constructing quasinormal modes of these geometries we show that generic linear perturbations decay slower than any inverse power of time.

  10. Molecular motion in restricted geometries

    Indian Academy of Sciences (India)

    Siddharth Gautam; S Mitra; R Mukhopadhyay

    2008-10-01

    Molecular dynamics in restricted geometries is known to exhibit anomalous behaviour. Diffusion, translational or rotational, of molecules is altered significantly on confinement in restricted geometries. Quasielastic neutron scattering (QENS) offers a unique possibility of studying molecular motion in such systems. Both time scales involved in the motion and the geometry of motion can be studied using QENS. Molecular dynamics (MD) simulation not only provides insight into the details of the different types of motion possible but also does not suffer limitations of the experimental set-up. Here we report the effect of confinement on molecular dynamics in various restricted geometries as studied by QENS and MD simulations: An example where the QENS technique provided direct evidence of phase transition associated with change in the dynamical behaviour of the molecules is also discussed.

  11. Moment methods in extremal geometry

    NARCIS (Netherlands)

    De Laat, D.

    2016-01-01

    In this thesis we develop techniques for solving problems in extremal geometry. We give an infinite dimensional generalization of moment techniques from polynomial optimization. We use this to construct semidefinite programming hierarchies for approximating optimal packing densities and ground state

  12. An introduction to differential geometry

    CERN Document Server

    Willmore, T J

    2012-01-01

    This text employs vector methods to explore the classical theory of curves and surfaces. Topics include basic theory of tensor algebra, tensor calculus, calculus of differential forms, and elements of Riemannian geometry. 1959 edition.

  13. Instability of supersymmetric microstate geometries

    Energy Technology Data Exchange (ETDEWEB)

    Eperon, Felicity C.; Reall, Harvey S.; Santos, Jorge E. [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom)

    2016-10-07

    We investigate the classical stability of supersymmetric, asymptotically flat, microstate geometries with five non-compact dimensions. Such geometries admit an “evanescent ergosurface”: a timelike hypersurface of infinite redshift. On such a surface, there are null geodesics with zero energy relative to infinity. These geodesics are stably trapped in the potential well near the ergosurface. We present a heuristic argument indicating that this feature is likely to lead to a nonlinear instability of these solutions. We argue that the precursor of such an instability can be seen in the behaviour of linear perturbations: nonlinear stability would require that all linear perturbations decay sufficiently rapidly but the stable trapping implies that some linear perturbation decay very slowly. We study this in detail for the most symmetric microstate geometries. By constructing quasinormal modes of these geometries we show that generic linear perturbations decay slower than any inverse power of time.

  14. Moment methods in extremal geometry

    NARCIS (Netherlands)

    De Laat, D.

    2016-01-01

    In this thesis we develop techniques for solving problems in extremal geometry. We give an infinite dimensional generalization of moment techniques from polynomial optimization. We use this to construct semidefinite programming hierarchies for approximating optimal packing densities and ground state

  15. Guide to Computational Geometry Processing

    DEFF Research Database (Denmark)

    Bærentzen, Jakob Andreas; Gravesen, Jens; Anton, François

    be processed before it is useful. This Guide to Computational Geometry Processing reviews the algorithms for processing geometric data, with a practical focus on important techniques not covered by traditional courses on computer vision and computer graphics. This is balanced with an introduction......Optical scanning is rapidly becoming ubiquitous. From industrial laser scanners to medical CT, MR and 3D ultrasound scanners, numerous organizations now have easy access to optical acquisition devices that provide huge volumes of image data. However, the raw geometry data acquired must first......, metric space, affine spaces, differential geometry, and finite difference methods for derivatives and differential equations Reviews geometry representations, including polygonal meshes, splines, and subdivision surfaces Examines techniques for computing curvature from polygonal meshes Describes...

  16. Advances in discrete differential geometry

    CERN Document Server

    2016-01-01

    This is one of the first books on a newly emerging field of discrete differential geometry and an excellent way to access this exciting area. It surveys the fascinating connections between discrete models in differential geometry and complex analysis, integrable systems and applications in computer graphics. The authors take a closer look at discrete models in differential geometry and dynamical systems. Their curves are polygonal, surfaces are made from triangles and quadrilaterals, and time is discrete. Nevertheless, the difference between the corresponding smooth curves, surfaces and classical dynamical systems with continuous time can hardly be seen. This is the paradigm of structure-preserving discretizations. Current advances in this field are stimulated to a large extent by its relevance for computer graphics and mathematical physics. This book is written by specialists working together on a common research project. It is about differential geometry and dynamical systems, smooth and discrete theories, ...

  17. cobalt (ii), nickel (ii)

    African Journals Online (AJOL)

    DR. AMINU

    ABSTRACT. The manganese (II), cobalt (II), nickel (II) and copper (II) complexes of N, N' – ... temperature and coordinated water were determined ... indicating fairly stable complex compounds (Table 1). The complex compounds are insoluble [Table 2] in water and common organic solvents, but are readily soluble in ...

  18. Paper Interfaces for Learning Geometry

    OpenAIRE

    Bonnard, Quentin; Verma, Himanshu; Kaplan, Frédéric; Dillenbourg, Pierre

    2012-01-01

    Paper interfaces offer tremendous possibilities for geometry education in primary schools. Existing computer interfaces designed to learn geometry do not consider the integration of conventional school tools, which form the part of the curriculum. Moreover, most of computer tools are designed specifically for individual learning, some propose group activities, but most disregard classroom-level learning, thus impeding their adoption. We present an augmented reality based tabletop system with ...

  19. Courant Algebroids in Parabolic Geometry

    CERN Document Server

    Armstrong, Stuart

    2011-01-01

    To a smooth manifold $M$, a parabolic geometry associates a principal bundle, which has a parabolic subgroup of a semisimple Lie group as its structure group, and a Cartan connection. We show that the adjoint tractor bundle of a regular normal parabolic geometry can be endowed with the structure of a Courant algebroid. This gives a class of examples of transitive Courant algebroids that are not exact.

  20. Topology and geometry for physicists

    CERN Document Server

    Nash, Charles

    2011-01-01

    Differential geometry and topology are essential tools for many theoretical physicists, particularly in the study of condensed matter physics, gravity, and particle physics. Written by physicists for physics students, this text introduces geometrical and topological methods in theoretical physics and applied mathematics. It assumes no detailed background in topology or geometry, and it emphasizes physical motivations, enabling students to apply the techniques to their physics formulas and research. ""Thoroughly recommended"" by The Physics Bulletin, this volume's physics applications range fr

  1. Higgs mass in noncommutative geometry

    Energy Technology Data Exchange (ETDEWEB)

    Devastato, A.; Martinetti, P. [Dipartimento di Fisica, Universita di Napoli Federico II, Via Cintia, 80126 Napoli (Italy); INFN, Sezione di Napoli, Via Cintia, 80126 Napoli (Italy); Lizzi, F. [Dipartimento di Fisica, Universita di Napoli Federico II, Via Cintia, 80126 Napoli (Italy); INFN, Sezione di Napoli, Via Cintia, 80126 Napoli (Italy); Departament de Estructura i Constituents de la Materia, Universitat de Barcelona, Marti y Franques, Barcelona, Catalonia (Spain)

    2014-09-11

    In the noncommutative geometry approach to the standard model, an extra scalar field σ - initially suggested by particle physicist to stabilize the electroweak vacuum - makes the computation of the Higgs mass compatible with the 126 GeV experimental value. We give a brief account on how to generate this field from the Majorana mass of the neutrino, following the principles of noncommutative geometry. (Copyright copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  2. The Common Geometry Module (CGM).

    Energy Technology Data Exchange (ETDEWEB)

    Tautges, Timothy James

    2004-12-01

    The Common Geometry Module (CGM) is a code library which provides geometry functionality used for mesh generation and other applications. This functionality includes that commonly found in solid modeling engines, like geometry creation, query and modification; CGM also includes capabilities not commonly found in solid modeling engines, like geometry decomposition tools and support for shared material interfaces. CGM is built upon the ACIS solid modeling engine, but also includes geometry capability developed beside and on top of ACIS. CGM can be used as-is to provide geometry functionality for codes needing this capability. However, CGM can also be extended using derived classes in C++, allowing the geometric model to serve as the basis for other applications, for example mesh generation. CGM is supported on Sun Solaris, SGI, HP, IBM, DEC, Linux and Windows NT platforms. CGM also includes support for loading ACIS models on parallel computers, using MPI-based communication. Future plans for CGM are to port it to different solid modeling engines, including Pro/Engineer or SolidWorks. CGM is being released into the public domain under an LGPL license; the ACIS-based engine is available to ACIS licensees on request.

  3. Emergent Geometry from Entropy and Causality

    Science.gov (United States)

    Engelhardt, Netta

    generalizations are discussed, both at the classical and perturbatively quantum limits. In particular, several No Go Theorems are proven, indicative of a conclusion that supplementary approaches or information may be necessary to recover the full spacetime geometry. Part II of this thesis involves the relation between geometry and causality, the property that information cannot travel faster than light. Requiring this of any quantum field theory results in constraints on string theory setups that are dual to quantum field theories via the AdS/CFT correspondence. At the level of perturbative quantum gravity, it is shown that causality in the field theory constraints the causal structure in the bulk. At the level of nonperturbative quantum string theory, we find that constraints on causal signals restrict the possible ways in which curvature singularities can be resolved in string theory. Finally, a new program of research is proposed for the construction of bulk geometry from the divergences of correlation functions in the dual field theory. This divergence structure is linked to the causal structure of the bulk and of the field theory.

  4. Holomorphic Cartan geometries and rational curves

    CERN Document Server

    Biswas, Indranil

    2010-01-01

    We prove that any compact K\\"ahler manifold bearing a holomorphic Cartan geometry contains a rational curve just when the Cartan geometry is inherited from a holomorphic Cartan geometry on a lower dimensional compact K\\"ahler manifold.

  5. Cell geometry dictates TNFα-induced genome response.

    Science.gov (United States)

    Mitra, Aninda; Venkatachalapathy, Saradha; Ratna, Prasuna; Wang, Yejun; Jokhun, Doorgesh Sharma; Shivashankar, G V

    2017-05-16

    Cells in physiology integrate local soluble and mechanical signals to regulate genomic programs. Whereas the individual roles of these signals are well studied, the cellular responses to the combined chemical and physical signals are less explored. Here, we investigated the cross-talk between cellular geometry and TNFα signaling. We stabilized NIH 3T3 fibroblasts into rectangular anisotropic or circular isotropic geometries and stimulated them with TNFα and analyzed nuclear translocation of transcription regulators -NFκB (p65) and MKL and downstream gene-expression patterns. We found that TNFα induces geometry-dependent actin depolymerization, which enhances IκB degradation, p65 nuclear translocation, nuclear exit of MKL, and sequestration of p65 at the RNA-polymerase-II foci. Further, global transcription profile of cells under matrix-TNFα interplay reveals a geometry-dependent gene-expression pattern. At a functional level, we find cell geometry affects TNFα-induced cell proliferation. Our results provide compelling evidence that fibroblasts, depending on their geometries, elicit distinct cellular responses for the same cytokine.

  6. Conformal submanifold geometry I-III

    CERN Document Server

    Burstall, Francis E

    2010-01-01

    In Part I, we develop the notions of a Moebius structure and a conformal Cartan geometry, establish an equivalence between them; we use them in Part II to study submanifolds of conformal manifolds in arbitrary dimension and codimension. We obtain Gauss-Codazzi-Ricci equations and a conformal Bonnet theorem characterizing immersed submanifolds of the conformal n-sphere. These methods are applied in Part III to study constrained Willmore surfaces, isothermic surfaces, Guichard surfaces and conformally-flat submanifolds with flat normal bundle, and their spectral deformations, in arbitrary codimension. The high point of these applications is a unified theory of Moebius-flat submanifolds, which include Guichard surfaces and conformally flat hypersurfaces.

  7. Advanced geometries for ballistic neutron guides

    Science.gov (United States)

    Schanzer, Christian; Böni, Peter; Filges, Uwe; Hils, Thomas

    2004-08-01

    Sophisticated neutron guide systems take advantage of supermirrors being used to increase the neutron flux. However, the finite reflectivity of supermirrors becomes a major loss mechanism when many reflections occur, e.g. in long neutron guides and for long wavelengths. In order to reduce the number of reflections, ballistic neutron guides have been proposed. Usually linear tapered sections are used to enlarge the cross-section and finally, focus the beam to the sample. The disadvantages of linear tapering are (i) an inhomogeneous phase space at the sample position and (ii) a decreasing flux with increasing distance from the exit of the guide. We investigate the properties of parabolic and elliptic tapering for ballistic neutron guides, using the Monte Carlo program McStas with a new guide component dedicated for such geometries. We show that the maximum flux can indeed be shifted away from the exit of the guide. In addition we explore the possibilities of parabolic and elliptic geometries to create point like sources for dedicated experimental demands.

  8. Advanced geometries for ballistic neutron guides

    Energy Technology Data Exchange (ETDEWEB)

    Schanzer, Christian E-mail: christian.schanzer@frm2.tum.de; Boeni, Peter; Filges, Uwe; Hils, Thomas

    2004-08-21

    Sophisticated neutron guide systems take advantage of supermirrors being used to increase the neutron flux. However, the finite reflectivity of supermirrors becomes a major loss mechanism when many reflections occur, e.g. in long neutron guides and for long wavelengths. In order to reduce the number of reflections, ballistic neutron guides have been proposed. Usually linear tapered sections are used to enlarge the cross-section and finally, focus the beam to the sample. The disadvantages of linear tapering are (i) an inhomogeneous phase space at the sample position and (ii) a decreasing flux with increasing distance from the exit of the guide. We investigate the properties of parabolic and elliptic tapering for ballistic neutron guides, using the Monte Carlo program McStas with a new guide component dedicated for such geometries. We show that the maximum flux can indeed be shifted away from the exit of the guide. In addition we explore the possibilities of parabolic and elliptic geometries to create point like sources for dedicated experimental demands.

  9. Realism, positivism, instrumentalism, and quantum geometry

    Science.gov (United States)

    Prugovečki, Eduard

    1992-02-01

    The roles of classical realism, logical positivism, and pragmatic instrumentalism in the shaping of fundamental ideas in quantum physics are examined in the light of some recent historical and sociological studies of the factors that influenced their development. It is shown that those studies indicate that the conventionalistic form of instrumentalism that has dominated all the major post-World War II developments in quantum physics is not an outgrowth of the Copenhagen school, and that despite the “schism” in twentieth century physics created by the Bohr-Einstein “disagreements” on foundational issues in quantum theory, both their philosophical stands were very much opposed to those of conventionalistic instrumentalism. Quotations from the writings of Dirac, Heisenberg, Popper, Russell, and other influential thinkers, are provided, illustrating the fact that, despite the various divergencies in their opinions, they all either opposed the instrumentalist concept of “truth” in general, or its conventionalistic version in post-World War II quantum physics in particular. The basic epistemic ideas of a quantum geometry approach to quantum physics are reviewed and discussed from the point of view of a quantum realism that seeks to reconcile Bohr's “positivism” with Einstein's “realism” by emphasizing the existence of an underlying quantum reality, in which they both believed. This quantum geometry framework seeks to introduce geometro-stochastic concepts that are specifically designed for the systematic description of that underlying quantum reality, by developing the conceptual and mathematical tools that are most appropriate for such a use.

  10. General Construction of Tubular Geometry

    CERN Document Server

    Mukhopadhyay, Partha

    2016-01-01

    We consider the problem of locally describing tubular geometry around a submanifold embedded in a (pseudo)Riemannian manifold in its general form. Given the geometry of ambient space in an arbitrary coordinate system and equations determining the submanifold in the same system, we compute the tubular expansion coefficients in terms of this {\\it a priori data}. This is done by using an indirect method that crucially applies the tubular expansion theorem for vielbein previously derived. With an explicit construction involving the relevant coordinate and non-coordinate frames we verify consistency of the whole method up to quadratic order in vielbein expansion. Furthermore, we perform certain (long and tedious) higher order computation which verifies the first non-trivial spin connection term in the expansion for the first time. Earlier a similar method was used to compute tubular geometry in loop space. We explain this work in the light of our general construction.

  11. Quantum geometry and gravitational entropy

    Energy Technology Data Exchange (ETDEWEB)

    Simon, Joan; Balasubramanian, Vijay; Czech, Bart Iomiej; Larjo, Klaus; Marolf, Donald; Simon, Joan

    2007-05-29

    Most quantum states have wavefunctions that are widely spread over the accessible Hilbert space and hence do not have a good description in terms of a single classical geometry. In order to understand when geometric descriptions are possible, we exploit the AdS/CFT correspondence in the half-BPS sector of asymptotically AdS_5 x S5 universes. In this sector we devise a"coarse-grained metric operator" whose eigenstates are well described by a single spacetime topology and geometry. We show that such half-BPS universes have a non-vanishing entropy if and only if the metric is singular, and that the entropy arises from coarse-graining the geometry. Finally, we use our entropy formula to find the most entropic spacetimes with fixed asymptotic moments beyond the global charges.

  12. Conventionalism and integrable Weyl geometry

    Science.gov (United States)

    Pucheu, M. L.

    2015-03-01

    Since the appearance of Einstein's general relativity, gravitation has been associated to the space-time curvature. This theory introduced a geometrodynamic language which became a convenient tool to predict matter behaviour. However, the properties of space-time itself cannot be measurable by experiments. Taking Poincaré idea that the geometry of space-time is merely a convention, we show that the general theory of relativity can be completely reformulated in a more general setting, a generalization of Riemannian geometry, namely, the Weyl integrable geometry. The choice of this new mathematical language implies, among other things, that the path of particles and light rays should now correspond to Weylian geodesies. Such modification in the dynamic of bodies brings a new perception of physical phenomena that we will explore.

  13. Wave propagation on microstate geometries

    CERN Document Server

    Keir, Joseph

    2016-01-01

    Supersymmetric microstate geometries were recently conjectured to be nonlinearly unstable due to numerical and heuristic evidence, based on the existence of very slowly decaying solutions to the linear wave equation on these backgrounds. In this paper, we give a thorough mathematical treatment of the linear wave equation on both two and three charge supersymmetric microstate geometries, finding a number of surprising results. In both cases we prove that solutions to the wave equation have uniformly bounded local energy, despite the fact that three charge microstates possess an ergoregion; these geometries therefore avoid Friedman's "ergosphere instability". In fact, in the three charge case we are able to construct solutions to the wave equation with local energy that neither grows nor decays, although this data must have nontrivial dependence on the Kaluza-Klein coordinate. In the two charge case we construct quasimodes and use these to bound the uniform decay rate, showing that the only possible uniform dec...

  14. Euclidean geometry and its subgeometries

    CERN Document Server

    Specht, Edward John; Calkins, Keith G; Rhoads, Donald H

    2015-01-01

    In this monograph, the authors present a modern development of Euclidean geometry from independent axioms, using up-to-date language and providing detailed proofs. The axioms for incidence, betweenness, and plane separation are close to those of Hilbert. This is the only axiomatic treatment of Euclidean geometry that uses axioms not involving metric notions and that explores congruence and isometries by means of reflection mappings. The authors present thirteen axioms in sequence, proving as many theorems as possible at each stage and, in the process, building up subgeometries, most notably the Pasch and neutral geometries. Standard topics such as the congruence theorems for triangles, embedding the real numbers in a line, and coordinatization of the plane are included, as well as theorems of Pythagoras, Desargues, Pappas, Menelaus, and Ceva. The final chapter covers consistency and independence of axioms, as well as independence of definition properties. There are over 300 exercises; solutions to many of the...

  15. Geometry of black hole spacetimes

    CERN Document Server

    Andersson, Lars; Blue, Pieter

    2016-01-01

    These notes, based on lectures given at the summer school on Asymptotic Analysis in General Relativity, collect material on the Einstein equations, the geometry of black hole spacetimes, and the analysis of fields on black hole backgrounds. The Kerr model of a rotating black hole in vacuum is expected to be unique and stable. The problem of proving these fundamental facts provides the background for the material presented in these notes. Among the many topics which are relevant for the uniqueness and stability problems are the theory of fields on black hole spacetimes, in particular for gravitational perturbations of the Kerr black hole, and more generally, the study of nonlinear field equations in the presence of trapping. The study of these questions requires tools from several different fields, including Lorentzian geometry, hyperbolic differential equations and spin geometry, which are all relevant to the black hole stability problem.

  16. The Geometry of the Galaxy's Spiral Arms

    Science.gov (United States)

    Steiman-Cameron, Thomas Y.; Wolfire, M.; Hollenbach, D.

    2008-05-01

    We present a new model for the spiral structure of the Milky Way based upon an analysis of the essentially all-sky spectral data obtained by the Far Infrared Absolute Spectrophotometer (FIRAS) instrument of the Cosmic Background Explorer (COBE) satellite. The model provides the volume emissivities of the [C II] 128 µm and [N II] 205 µm lines, as a function of position within the Galaxy. These lines are important coolants of the interstellar medium and strong tracers of the spiral structure. Despite decades of work, there is still no full agreement on the number of spiral arms in the Milky Way, much less the details of their geometry. Motivated, in part, by this fact, we conducted a systematic search for 2-arm, 3-arm, and 4-arm models that maximize agreement with the COBE data. We find that only a four-arm model, with arms defined by logarithmic spiral forms and pitch angles ranging from 13.5 to 15.6 degrees, is consistent with the observations. The arms are neither evenly spaced nor identical in form. The resultant volume emissivity models for C+ and N+, when convolved with the FIRAS beam and integrated over the Galaxy, reproduce the COBE [C II] 128 µm and [N II] 205 µm intensity maps extremely well. We also examine all models for the Galaxy's spiral structure that have been proposed over the past half century in the context of the same COBE observations. A significant fraction of these models, including many recent ones, appear to be incompatible with the data. However, several four-arm models from the literature are consistent with the COBE observations.

  17. Geometric Transformations in Engineering Geometry

    Directory of Open Access Journals (Sweden)

    I. F. Borovikov

    2015-01-01

    Full Text Available Recently, for business purposes, in view of current trends and world experience in training engineers, research and faculty staff there has been a need to transform traditional courses of descriptive geometry into the course of engineering geometry in which the geometrical transformations have to become its main section. On the basis of critical analysis the paper gives suggestions to improve a presentation technique of this section both in the classroom and in academic literature, extend an application scope of geometrical transformations to solve the position and metric tasks and simulation of surfaces, as well as to design complex engineering configurations, which meet a number of pre-specified conditions.The article offers to make a number of considerable amendments to the terms and definitions used in the existing courses of descriptive geometry. It draws some conclusions and makes the appropriate proposals on feasibility of coordination in teaching the movement transformation in the courses of analytical and descriptive geometry. This will provide interdisciplinary team teaching and allow students to be convinced that a combination of analytical and graphic ways to solve geometric tasks is useful and reasonable.The traditional sections of learning courses need to be added with a theory of projective and bi-rational transformations. In terms of application simplicity and convenience it is enough to consider the central transformations when solving the applied tasks. These transformations contain a beam of sub-invariant (low-invariant straight lines on which the invariant curve induces non-involution and involution projectivities. The expediency of nonlinear transformations application is shown in the article by a specific example of geometric modeling of the interfacing surface "spar-blade".Implementation of these suggestions will contribute to a real transformation of a traditional course of descriptive geometry to the engineering geometry

  18. KEMAJUAN BELAJAR SISWA PADA GEOMETRI TRANSFORMASI MENGGUNAKAN AKTIVITAS REFLEKSI GEOMETRI

    Directory of Open Access Journals (Sweden)

    Irkham Ulil Albab

    2014-10-01

    Full Text Available Abstrak: Penelitian ini bertujuan untuk mendeskripsikan kemajuan belajar siswa pada materi geometri transformasi yang didukung dengan serangkaian aktivitas belajar berdasarkan Pendidikan Matematika Realistik Indonesia. Penelitian didesain melalui tiga tahap, yaitu tahapan perancangan desain awal, pengujian desain melalui pembelajaran awal dan pembelajaran eksperimental, dan tahap analisis retrospektif. Dalam penelitian ini, Hypothetical Learning Trajectory, HLT (HLT berperan penting sebagai desain pembelajaran sekaligus instrumen penelitian. HLT diujikan terhadap 26 siswa kelas VII. Data dikumpulkan dengan teknik wawancara, pengamatan, dan catatan lapangan. Hasil penelitian menunjukkan bahwa desain pembelajaran ini mampu menstimulasi siswa untuk memberikan karakteristik refleksi dan transformasi geometri lainnya secara informal, mengklasifikasikannya dalam transformasi isometri pada level kedua, dan menemukan garis bantuan refleksi pada level yang lebih formal. Selain itu, garis bantuan refleksi digunakan oleh siswa untuk menggambar bayangan refleksi dan pola pencerminan serta memahami bentuk rotasi dan translasi sebagai kombinasi refleksi adalah level tertinggi. Keyword: transformasi geometri, kombinasi refleksi, rotasi, translasi, design research, HLT STUDENTS’ LEARNING PROGRESS ON TRANSFORMATION GEOMETRY USING THE GEOMETRY REFLECTION ACTIVITIES Abstract: This study was aimed at describing the students’ learning progress on transformation geometry supported by a set of learning activities based on Indonesian Realistic Mathematics Education. The study was designed into three stages, that is, the preliminary design stage, the design testing through initial instruction and experiment, and the restrospective analysis stage. In this study, Hypothetical Learning Trajectory (HLT played an important role as an instructional design and a research instrument. HLT was tested to 26 seventh grade students. The data were collected through interviews

  19. Stochastic geometry and its applications

    CERN Document Server

    Chiu, Sung Nok; Kendall, Wilfrid S; Mecke, Joseph

    2013-01-01

    An extensive update to a classic text Stochastic geometry and spatial statistics play a fundamental role in many modern branches of physics, materials sciences, engineering, biology and environmental sciences. They offer successful models for the description of random two- and three-dimensional micro and macro structures and statistical methods for their analysis. The previous edition of this book has served as the key reference in its field for over 18 years and is regarded as the best treatment of the subject of stochastic geometry, both as a subject with vital a

  20. Geometry Design of Wooden Barrels

    Directory of Open Access Journals (Sweden)

    Ivan CISMARU

    2010-12-01

    Full Text Available The aim of this paper is to present a design methodology of the wooden barrel geometry, as an algorithm of successive calculations. Thus, starting from the required elements (volume, length, shape, maximum height of storage space the user will be able to define the geometry which must be obtained by processing. Based on these calculations, one can define the structure, size and shape of the staves in order to establish the processing technology of both components and subassemblies (jacket and bottoms which are to form the final product by their assembling using metal circles.

  1. Geometry, topology, and string theory

    Energy Technology Data Exchange (ETDEWEB)

    Varadarajan, Uday

    2003-07-10

    A variety of scenarios are considered which shed light upon the uses and limitations of classical geometric and topological notions in string theory. The primary focus is on situations in which D-brane or string probes of a given classical space-time see the geometry quite differently than one might naively expect. In particular, situations in which extra dimensions, non-commutative geometries as well as other non-local structures emerge are explored in detail. Further, a preliminary exploration of such issues in Lorentzian space-times with non-trivial causal structures within string theory is initiated.

  2. Spatial geometry and special relativity

    DEFF Research Database (Denmark)

    Kneubil, Fabiana Botelho

    2016-01-01

    In this work, it is shown the interplay of relative and absolute entities, which are present in both spatial geometry and special relativity. In order to strengthen the understanding of special relativity, we discuss firstly an instance of geometry and the existence of both frame......-dependent and frame-independent entities. We depart from a subject well known by students, which is the three-dimensional geometric space in order to compare, afterwards, with the treatment of four-dimensional space in the special relativity. The differences and similarities between these two subjects are also...

  3. Introduction to topology and geometry

    CERN Document Server

    Stahl, Saul

    2014-01-01

    An easily accessible introduction to over three centuries of innovations in geometry Praise for the First Edition ". . . a welcome alternative to compartmentalized treatments bound to the old thinking. This clearly written, well-illustrated book supplies sufficient background to be self-contained." -CHOICE This fully revised new edition offers the most comprehensive coverage of modern geometry currently available at an introductory level. The book strikes a welcome balance between academic rigor and accessibility, providing a complete and cohesive picture of the science with an unparallele

  4. Lectures on classical differential geometry

    CERN Document Server

    Struik, Dirk J

    1988-01-01

    Elementary, yet authoritative and scholarly, this book offers an excellent brief introduction to the classical theory of differential geometry. It is aimed at advanced undergraduate and graduate students who will find it not only highly readable but replete with illustrations carefully selected to help stimulate the student's visual understanding of geometry. The text features an abundance of problems, most of which are simple enough for class use, and often convey an interesting geometrical fact. A selection of more difficult problems has been included to challenge the ambitious student.Writ

  5. Gauging Geometry: A Didactic Lecture

    CERN Document Server

    Kannenberg, L

    2016-01-01

    Local inertial frame invariance is taken as the fundamental principle of physical geometry, where a local inertial frame is represented by a verbein. Invariance of the vierbein with respect to local Lorentz transformations then expresses local inertial frame invariance. The dynamics of physical geometry develops as a gauge theory of the verbein that is closely analogous to the Yang-Mills field provided the verbein connection and curvature correspond to the geometric potential and field respectively. The resulting theory is shown to be equivalent to Einstein's tensor form of relativistic gravitation.

  6. Algebraic geometry and theta functions

    CERN Document Server

    Coble, Arthur B

    1929-01-01

    This book is the result of extending and deepening all questions from algebraic geometry that are connected to the central problem of this book: the determination of the tritangent planes of a space curve of order six and genus four, which the author treated in his Colloquium Lecture in 1928 at Amherst. The first two chapters recall fundamental ideas of algebraic geometry and theta functions in such fashion as will be most helpful in later applications. In order to clearly present the state of the central problem, the author first presents the better-known cases of genus two (Chapter III) and

  7. Comparison theorems in Riemannian geometry

    CERN Document Server

    Cheeger, Jeff

    2008-01-01

    The central theme of this book is the interaction between the curvature of a complete Riemannian manifold and its topology and global geometry. The first five chapters are preparatory in nature. They begin with a very concise introduction to Riemannian geometry, followed by an exposition of Toponogov's theorem-the first such treatment in a book in English. Next comes a detailed presentation of homogeneous spaces in which the main goal is to find formulas for their curvature. A quick chapter of Morse theory is followed by one on the injectivity radius. Chapters 6-9 deal with many of the most re

  8. Lectures on Algebraic Geometry I

    CERN Document Server

    Harder, Gunter

    2012-01-01

    This book and the following second volume is an introduction into modern algebraic geometry. In the first volume the methods of homological algebra, theory of sheaves, and sheaf cohomology are developed. These methods are indispensable for modern algebraic geometry, but they are also fundamental for other branches of mathematics and of great interest in their own. In the last chapter of volume I these concepts are applied to the theory of compact Riemann surfaces. In this chapter the author makes clear how influential the ideas of Abel, Riemann and Jacobi were and that many of the modern metho

  9. Photogrammetric computer vision statistics, geometry, orientation and reconstruction

    CERN Document Server

    Förstner, Wolfgang

    2016-01-01

    This textbook offers a statistical view on the geometry of multiple view analysis, required for camera calibration and orientation and for geometric scene reconstruction based on geometric image features. The authors have backgrounds in geodesy and also long experience with development and research in computer vision, and this is the first book to present a joint approach from the converging fields of photogrammetry and computer vision. Part I of the book provides an introduction to estimation theory, covering aspects such as Bayesian estimation, variance components, and sequential estimation, with a focus on the statistically sound diagnostics of estimation results essential in vision metrology. Part II provides tools for 2D and 3D geometric reasoning using projective geometry. This includes oriented projective geometry and tools for statistically optimal estimation and test of geometric entities and transformations and their rela­tions, tools that are useful also in the context of uncertain reasoning in po...

  10. Flow, transport and diffusion in random geometries II: applications

    KAUST Repository

    Asinari, Pietro

    2015-01-07

    Multilevel Monte Carlo (MLMC) is an efficient and flexible solution for the propagation of uncertainties in complex models, where an explicit parametrization of the input randomness is not available or too expensive. We present several applications of our MLMC algorithm for flow, transport and diffusion in random heterogeneous materials. The absolute permeability and effective diffusivity (or formation factor) of micro-scale porous media samples are computed and the uncertainty related to the sampling procedures is studied. The algorithm is then extended to the transport problems and multiphase flows for the estimation of dispersion and relative permeability curves. The impact of water drops on random stuctured surfaces, with microfluidics applications to self-cleaning materials, is also studied and simulated. Finally the estimation of new drag correlation laws for poly-dispersed dilute and dense suspensions is presented.

  11. Teaching Activity-Based Taxicab Geometry

    Science.gov (United States)

    Ada, Tuba

    2013-01-01

    This study aimed on the process of teaching taxicab geometry, a non-Euclidean geometry that is easy to understand and similar to Euclidean geometry with its axiomatic structure. In this regard, several teaching activities were designed such as measuring taxicab distance, defining a taxicab circle, finding a geometric locus in taxicab geometry, and…

  12. Differential geometry meets the cell.

    Science.gov (United States)

    Marshall, Wallace F

    2013-07-18

    A new study by Terasaki et al. highlights the role of physical forces in biological form by showing that connections between stacked endoplasmic reticulum cisternae have a shape well known in classical differential geometry, the helicoid, and that this shape is a predictable consequence of membrane physics.

  13. The geometry of SU(3)

    Energy Technology Data Exchange (ETDEWEB)

    Byrd, M.

    1997-10-01

    The group SU(3) is parameterized in terms of generalized {open_quotes}Euler angles{close_quotes}. The differential operators of SU(3) corresponding to the Lie Algebra elements are obtained, the invariant forms are found, the group invariant volume element is found, and some relevant comments about the geometry of the group manifold are made.

  14. Fractal geometry and stochastics IV

    CERN Document Server

    Bandt, Christoph

    2010-01-01

    Over the years fractal geometry has established itself as a substantial mathematical theory in its own right. This book collects survey articles covering many of the developments, like Schramm-Loewner evolution, fractal scaling limits, exceptional sets for percolation, and heat kernels on fractals.

  15. Signature geometry and quantum engineering

    Science.gov (United States)

    Samociuk, Stefan

    2013-09-01

    As the operating frequency of electromagnetic based devices increase, physical design geometry is playing an ever more important role. Evidence is considered in support of a relationship between the dimensionality of primitive geometric forms, such as transistors, and corresponding electromagnetic coupling efficiency. The industry of electronics is defined as the construction of devices by the patterning of primitive forms to physical materials. Examples are given to show the evolution of these primitives, down to nano scales, are requiring exacting geometry and three dimensional content. Consideration of microwave monolithic integrated circuits,(MMIC), photonics and metamaterials,(MM), support this trend and also add new requirements of strict geometric periodicity and multiplicity. Signature geometries,(SG), are characterized by distinctive attributes and examples are given. The transcendent form transcode algorithm, (TTA) is introduced as a multi dimensional SG and its use in designing photonic integrated circuits and metamaterials is discussed . A creative commons licensed research database, TRANSFORM, containing TTA geometries in OASIS file formats is described. An experimental methodology for using the database is given. Multidimensional SG and extraction of three dimensional cross sections as primitive forms is discussed as a foundation for quantum engineering and the exploitation of phenomena other than the electromagnetic.

  16. Instructional Identities of Geometry Students

    Science.gov (United States)

    Aaron, Wendy Rose; Herbst, Patricio

    2012-01-01

    We inspect the hypothesis that geometry students may be oriented toward how they expect that the teacher will evaluate them as students or otherwise oriented to how they expect that their work will give them opportunities to do mathematics. The results reported here are based on a mixed-methods analysis of twenty-two interviews with high school…

  17. Loop groups and noncommutative geometry

    CERN Document Server

    Carpi, Sebastiano

    2015-01-01

    We describe the representation theory of loop groups in terms of K-theory and noncommutative geometry. This is done by constructing suitable spectral triples associated with the level l projective unitary positive-energy representations of any given loop group LG. The construction is based on certain supersymmetric conformal field theory models associated with LG.

  18. 3DHZETRN: Inhomogeneous Geometry Issues

    Science.gov (United States)

    Wilson, John W.; Slaba, Tony C.; Badavi, Francis F.

    2017-01-01

    Historical methods for assessing radiation exposure inside complicated geometries for space applications were limited by computational constraints and lack of knowledge associated with nuclear processes occurring over a broad range of particles and energies. Various methods were developed and utilized to simplify geometric representations and enable coupling with simplified but efficient particle transport codes. Recent transport code development efforts, leading to 3DHZETRN, now enable such approximate methods to be carefully assessed to determine if past exposure analyses and validation efforts based on those approximate methods need to be revisited. In this work, historical methods of representing inhomogeneous spacecraft geometry for radiation protection analysis are first reviewed. Two inhomogeneous geometry cases, previously studied with 3DHZETRN and Monte Carlo codes, are considered with various levels of geometric approximation. Fluence, dose, and dose equivalent values are computed in all cases and compared. It is found that although these historical geometry approximations can induce large errors in neutron fluences up to 100 MeV, errors on dose and dose equivalent are modest (<10%) for the cases studied here.

  19. The Basics of Information Geometry

    CERN Document Server

    Caticha, Ariel

    2014-01-01

    To what extent can we distinguish one probability distribution from another? Are there quantitative measures of distinguishability? The goal of this tutorial is to approach such questions by introducing the notion of the "distance" between two probability distributions and exploring some basic ideas of such an "information geometry".

  20. College geometry a unified development

    CERN Document Server

    Kay, David C

    2011-01-01

    ""The book is a comprehensive textbook on basic geometry. … Key features of the book include numerous figures and many problems, more than half of which come with hints or even complete solutions. Frequent historical comments add to making the reading a pleasant one.""-Michael Joswig, Zentralblatt MATH 1273

  1. Foucault pendulum through basic geometry

    Science.gov (United States)

    von Bergmann, Jens; von Bergmann, HsingChi

    2007-10-01

    We provide a thorough explanation of the Foucault pendulum that utilizes its underlying geometry on a level suitable for science students not necessarily familiar with calculus. We also explain how the geometrically understood Foucault pendulum can serve as a prototype for more advanced phenomena in physics known as Berry's phase or geometric phases.

  2. Analogical Reasoning in Geometry Education

    Science.gov (United States)

    Magdas, Ioana

    2015-01-01

    The analogical reasoning isn't used only in mathematics but also in everyday life. In this article we approach the analogical reasoning in Geometry Education. The novelty of this article is a classification of geometrical analogies by reasoning type and their exemplification. Our classification includes: analogies for understanding and setting a…

  3. Open problems in algebraic geometry

    NARCIS (Netherlands)

    Edixhoven, S.J.; Moonen, B.J.J.; Oort, F.

    2000-01-01

    The open problems presented here were collected on the occasion of a workshop on Arithmetic Geometry at the University ofUtrecht, 26{30 June, 2000. This workshop was organized by the editors of the present article, and was made possible by support of: | NWO, the Netherlands Organization for

  4. Data Imprecision in Computational Geometry

    NARCIS (Netherlands)

    Löffler, M.

    2009-01-01

    The field of computational geometry is concerned with the design and analysis of geometric algorithms. For such algorithms, correctness and efficiency proofs are constructed, or problems are proven to be hard when no correct and efficient algorithms exist. In order to be able to do this, several ass

  5. GEOMETRY AND COMPLEXITY IN ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    RUSU Maria Ana

    2015-06-01

    Full Text Available As Constantin Brancuși (1876-1956 said „Simplicity is complexity itself“, simplicity and regularity through the use of basic geometric forms has always played a central role in architectural design, during the 20th century. A diachronic perspective, shows as the use of geometry and mathematics to describe built form provided a common basis for communication between the processes of design, fabrication and stability. Classic ways of representing geometry, based on descriptive methods, favor precise language of bidimensionality easy to represent in a rectangular coordinate system. In recent years, the importance of geometry has been re-emphasized by significant advances in the digital age, where computers are increasingly used in design, fabrication and construction to explore the art of the possible. Contemporary architecture transcend the limitations of Euclidean geometry and create new forms that are emerging through the convergence of complex systems, computational design and robotic fabrication devices, but which can also achieve higher levels of performance. Freeform architectural shapes and structures play an increasingly important role in 21st century architectural design. Through a series of examples, the paper relates to contemporary architectural explorations of complex, curvilinear surfaces in the digital age and discusses how it has required rethinking the mode in which we traditionally operate as architects. The analysis creates the possibility of comparisons between original and current design.

  6. Geometri

    DEFF Research Database (Denmark)

    Byg din egen boomerang, kast den, se den flyve, forstå hvorfor og hvordan den vender tilbage, og grib den. Det handler om opdriften på vingerne når du flyver, men det handler også og allermest om den mærkværdige gyroskop-effekt, du bruger til at holde balancen, når du kører på cykel. Vi vil bruge...

  7. Geometry of Membrane Sigma Models

    CERN Document Server

    Vysoky, Jan

    2015-01-01

    String theory still remains one of the promising candidates for a unification of the theory of gravity and quantum field theory. One of its essential parts is relativistic description of moving multi-dimensional objects called membranes (or p-branes) in a curved spacetime. On the classical field theory level, they are described by an action functional extremalising the volume of a manifold swept by a propagating membrane. This and related field theories are collectively called membrane sigma models. Differential geometry is an important mathematical tool in the study of string theory. It turns out that string and membrane backgrounds can be conveniently described using objects defined on a direct sum of tangent and cotangent bundles of the spacetime manifold. Mathematical field studying such object is called generalized geometry. Its integral part is the theory of Leibniz algebroids, vector bundles with a Leibniz algebra bracket on its module of smooth sections. Special cases of Leibniz algebroids are better ...

  8. Differential geometry and mathematical physics

    CERN Document Server

    Rudolph, Gerd

    Starting from an undergraduate level, this book systematically develops the basics of • Calculus on manifolds, vector bundles, vector fields and differential forms, • Lie groups and Lie group actions, • Linear symplectic algebra and symplectic geometry, • Hamiltonian systems, symmetries and reduction, integrable systems and Hamilton-Jacobi theory. The topics listed under the first item are relevant for virtually all areas of mathematical physics. The second and third items constitute the link between abstract calculus and the theory of Hamiltonian systems. The last item provides an introduction to various aspects of this theory, including Morse families, the Maslov class and caustics. The book guides the reader from elementary differential geometry to advanced topics in the theory of Hamiltonian systems with the aim of making current research literature accessible. The style is that of a mathematical textbook,with full proofs given in the text or as exercises. The material is illustrated by numerous d...

  9. Fractal geometry and computer graphics

    CERN Document Server

    Sakas, Georgios; Peitgen, Heinz-Otto; Englert, Gabriele

    1992-01-01

    Fractal geometry has become popular in the last 15 years, its applications can be found in technology, science, or even arts. Fractal methods and formalism are seen today as a general, abstract, but nevertheless practical instrument for the description of nature in a wide sense. But it was Computer Graphics which made possible the increasing popularity of fractals several years ago, and long after their mathematical formulation. The two disciplines are tightly linked. The book contains the scientificcontributions presented in an international workshop in the "Computer Graphics Center" in Darmstadt, Germany. The target of the workshop was to present the wide spectrum of interrelationships and interactions between Fractal Geometry and Computer Graphics. The topics vary from fundamentals and new theoretical results to various applications and systems development. All contributions are original, unpublished papers.The presentations have been discussed in two working groups; the discussion results, together with a...

  10. The geometry of surfaces contact

    Directory of Open Access Journals (Sweden)

    Siegl J.

    2007-11-01

    Full Text Available This contribution deals with a geometrical exact description of contact between two given surfaces which are defined by the vector functions. These surfaces are substituted at a contact point by approximate surfaces of the second order in accordance with the Taylor series and consequently there is derived a differential surface of these second order surfaces. Knowledge of principal normal curvatures, their directions and the tensor (Dupin indicatrix of this differential surface are necessary for description of contact of these surfaces. For description of surface geometry the first and the second surface fundamental tensor and a further methods of the differential geometry are used. A geometrical visualisation of obtained results of this analysis is made. Method and results of this study will be applied to contact analysis of tooth screw surfaces of screw machines.

  11. Grassmannian geometry of scattering amplitudes

    CERN Document Server

    Arkani-Hamed, Nima; Cachazo, Freddy; Goncharov, Alexander; Postnikov, Alexander; Trnka, Jaroslav

    2016-01-01

    Outlining a revolutionary reformulation of the foundations of perturbative quantum field theory, this book is a self-contained and authoritative analysis of the application of this new formulation to the case of planar, maximally supersymmetric Yang–Mills theory. The book begins by deriving connections between scattering amplitudes and Grassmannian geometry from first principles before introducing novel physical and mathematical ideas in a systematic manner accessible to both physicists and mathematicians. The principle players in this process are on-shell functions which are closely related to certain sub-strata of Grassmannian manifolds called positroids - in terms of which the classification of on-shell functions and their relations becomes combinatorially manifest. This is an essential introduction to the geometry and combinatorics of the positroid stratification of the Grassmannian and an ideal text for advanced students and researchers working in the areas of field theory, high energy physics, and the...

  12. Foliation theory in algebraic geometry

    CERN Document Server

    McKernan, James; Pereira, Jorge

    2016-01-01

    Featuring a blend of original research papers and comprehensive surveys from an international team of leading researchers in the thriving fields of foliation theory, holomorphic foliations, and birational geometry, this book presents the proceedings of the conference "Foliation Theory in Algebraic Geometry," hosted by the Simons Foundation in New York City in September 2013.  Topics covered include: Fano and del Pezzo foliations; the cone theorem and rank one foliations; the structure of symmetric differentials on a smooth complex surface and a local structure theorem for closed symmetric differentials of rank two; an overview of lifting symmetric differentials from varieties with canonical singularities and the applications to the classification of AT bundles on singular varieties; an overview of the powerful theory of the variety of minimal rational tangents introduced by Hwang and Mok; recent examples of varieties which are hyperbolic and yet the Green-Griffiths locus is the whole of X; and a classificati...

  13. Euclidean distance geometry an introduction

    CERN Document Server

    Liberti, Leo

    2017-01-01

    This textbook, the first of its kind, presents the fundamentals of distance geometry:  theory, useful methodologies for obtaining solutions, and real world applications. Concise proofs are given and step-by-step algorithms for solving fundamental problems efficiently and precisely are presented in Mathematica®, enabling the reader to experiment with concepts and methods as they are introduced. Descriptive graphics, examples, and problems, accompany the real gems of the text, namely the applications in visualization of graphs, localization of sensor networks, protein conformation from distance data, clock synchronization protocols, robotics, and control of unmanned underwater vehicles, to name several.  Aimed at intermediate undergraduates, beginning graduate students, researchers, and practitioners, the reader with a basic knowledge of linear algebra will gain an understanding of the basic theories of distance geometry and why they work in real life.

  14. Groups and Geometries : Siena Conference

    CERN Document Server

    Kantor, William; Lunardon, Guglielmo; Pasini, Antonio; Tamburini, Maria

    1998-01-01

    On September 1-7, 1996 a conference on Groups and Geometries took place in lovely Siena, Italy. It brought together experts and interested mathematicians from numerous countries. The scientific program centered around invited exposi­ tory lectures; there also were shorter research announcements, including talks by younger researchers. The conference concerned a broad range of topics in group theory and geometry, with emphasis on recent results and open problems. Special attention was drawn to the interplay between group-theoretic methods and geometric and combinatorial ones. Expanded versions of many of the talks appear in these Proceedings. This volume is intended to provide a stimulating collection of themes for a broad range of algebraists and geometers. Among those themes, represented within the conference or these Proceedings, are aspects of the following: 1. the classification of finite simple groups, 2. the structure and properties of groups of Lie type over finite and algebraically closed fields of f...

  15. Beyond core knowledge: Natural geometry

    Science.gov (United States)

    Spelke, Elizabeth; Lee, Sang Ah; Izard, Véronique

    2010-01-01

    For many centuries, philosophers and scientists have pondered the origins and nature of human intuitions about the properties of points, lines, and figures on the Euclidean plane, with most hypothesizing that a system of Euclidean concepts either is innate or is assembled by general learning processes. Recent research from cognitive and developmental psychology, cognitive anthropology, animal cognition, and cognitive neuroscience suggests a different view. Knowledge of geometry may be founded on at least two distinct, evolutionarily ancient, core cognitive systems for representing the shapes of large-scale, navigable surface layouts and of small-scale, movable forms and objects. Each of these systems applies to some but not all perceptible arrays and captures some but not all of the three fundamental Euclidean relationships of distance (or length), angle, and direction (or sense). Like natural number (Carey, 2009), Euclidean geometry may be constructed through the productive combination of representations from these core systems, through the use of uniquely human symbolic systems. PMID:20625445

  16. Gear geometry of cycloid drives

    Institute of Scientific and Technical Information of China (English)

    CHEN BingKui; FANG TingTing; LI ChaoYang; WANG ShuYan

    2008-01-01

    According to differential geometry and gear geometry,the equation of meshing for small teeth difference planetary gearing and a universal equation of conjugated profile are established based on cylindrical pin tooth and given motion.The correct meshing condition,contact line,contact ratio,calculating method for pin tooth's maximum contact point are developed.Investigation on the theory of conjugated meshing is carried out when the tooth difference numbers between pin wheel and cycloidal gear are 1,2,3 and -1,respectively.A general method called enveloping method to generate hypocycloid and epicycloid is put forward.The correct mesh-ing condition for cycloid pin wheel gearing is provided,and the contact line and the contact ratio are also discussed.

  17. Geometry of polycrystals and microstructure

    Directory of Open Access Journals (Sweden)

    Ball John M.

    2015-01-01

    Full Text Available We investigate the geometry of polycrystals, showing that for polycrystals formed of convex grains the interior grains are polyhedral, while for polycrystals with general grain geometry the set of triple points is small. Then we investigate possible martensitic morphologies resulting from intergrain contact. For cubic-totetragonal transformations we show that homogeneous zero-energy microstructures matching a pure dilatation on a grain boundary necessarily involve more than four deformation gradients. We discuss the relevance of this result for observations of microstructures involving second and third-order laminates in various materials. Finally we consider the more specialized situation of bicrystals formed from materials having two martensitic energy wells (such as for orthorhombic to monoclinic transformations, but without any restrictions on the possible microstructure, showing how a generalization of the Hadamard jump condition can be applied at the intergrain boundary to show that a pure phase in either grain is impossible at minimum energy.

  18. Gear geometry of cycloid drives

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    According to differential geometry and gear geometry, the equation of meshing for small teeth difference planetary gearing and a universal equation of conjugated profile are established based on cylindrical pin tooth and given motion. The correct meshing condition, contact line, contact ratio, calculating method for pin tooth’s maximum contact point are developed. Investigation on the theory of conjugated meshing is carried out when the tooth difference numbers between pin wheel and cycloidal gear are 1, 2, 3 and ?1, respectively. A general method called enveloping method to generate hypocycloid and epicycloid is put forward. The correct meshing condition for cycloid pin wheel gearing is provided, and the contact line and the contact ratio are also discussed.

  19. The geometry of celestial mechanics

    CERN Document Server

    Geiges, Hansjörg

    2016-01-01

    Celestial mechanics is the branch of mathematical astronomy devoted to studying the motions of celestial bodies subject to the Newtonian law of gravitation. This mathematical introductory textbook reveals that even the most basic question in celestial mechanics, the Kepler problem, leads to a cornucopia of geometric concepts: conformal and projective transformations, spherical and hyperbolic geometry, notions of curvature, and the topology of geodesic flows. For advanced undergraduate and beginning graduate students, this book explores the geometric concepts underlying celestial mechanics and is an ideal companion for introductory courses. The focus on the history of geometric ideas makes it perfect supplementary reading for students in elementary geometry and topology. Numerous exercises, historical notes and an extensive bibliography provide all the contextual information required to gain a solid grounding in celestial mechanics.

  20. Core foundations of abstract geometry.

    Science.gov (United States)

    Dillon, Moira R; Huang, Yi; Spelke, Elizabeth S

    2013-08-27

    Human adults from diverse cultures share intuitions about the points, lines, and figures of Euclidean geometry. Do children develop these intuitions by drawing on phylogenetically ancient and developmentally precocious geometric representations that guide their navigation and their analysis of object shape? In what way might these early-arising representations support later-developing Euclidean intuitions? To approach these questions, we investigated the relations among young children's use of geometry in tasks assessing: navigation; visual form analysis; and the interpretation of symbolic, purely geometric maps. Children's navigation depended on the distance and directional relations of the surface layout and predicted their use of a symbolic map with targets designated by surface distances. In contrast, children's analysis of visual forms depended on the size-invariant shape relations of objects and predicted their use of the same map but with targets designated by corner angles. Even though the two map tasks used identical instructions and map displays, children's performance on these tasks showed no evidence of integrated representations of distance and angle. Instead, young children flexibly recruited geometric representations of either navigable layouts or objects to interpret the same spatial symbols. These findings reveal a link between the early-arising geometric representations that humans share with diverse animals and the flexible geometric intuitions that give rise to human knowledge at its highest reaches. Although young children do not appear to integrate core geometric representations, children's use of the abstract geometry in spatial symbols such as maps may provide the earliest clues to the later construction of Euclidean geometry.

  1. Topics in modern differential geometry

    CERN Document Server

    Verstraelen, Leopold

    2017-01-01

    A variety of introductory articles is provided on a wide range of topics, including variational problems on curves and surfaces with anisotropic curvature. Experts in the fields of Riemannian, Lorentzian and contact geometry present state-of-the-art reviews of their topics. The contributions are written on a graduate level and contain extended bibliographies. The ten chapters are the result of various doctoral courses which were held in 2009 and 2010 at universities in Leuven, Serbia, Romania and Spain.

  2. Geometry for the accelerating universe

    CERN Document Server

    Punzi, R; Wohlfarth, M N R; Punzi, Raffaele; Schuller, Frederic P.; Wohlfarth, Mattias N.R.

    2006-01-01

    The Lorentzian spacetime metric is replaced by an area metric which naturally emerges as a generalized geometry in quantum string and gauge theory. Employing the area metric curvature scalar, the gravitational Einstein-Hilbert action is re-interpreted as dynamics for an area metric. Without the need for dark energy or fine-tuning, area metric cosmology explains the observed small acceleration of the late Universe.

  3. Number theory III Diophantine geometry

    CERN Document Server

    1991-01-01

    From the reviews of the first printing of this book, published as Volume 60 of the Encyclopaedia of Mathematical Sciences: "Between number theory and geometry there have been several stimulating influences, and this book records of these enterprises. This author, who has been at the centre of such research for many years, is one of the best guides a reader can hope for. The book is full of beautiful results, open questions, stimulating conjectures and suggestions where to look for future developments. This volume bears witness of the broad scope of knowledge of the author, and the influence of several people who have commented on the manuscript before publication ... Although in the series of number theory, this volume is on diophantine geometry, and the reader will notice that algebraic geometry is present in every chapter. ... The style of the book is clear. Ideas are well explained, and the author helps the reader to pass by several technicalities. Reading and rereading this book I noticed that the topics ...

  4. Introduction to geometry and relativity

    CERN Document Server

    2013-01-01

    This book provides a lucid introduction to both modern differential geometry and relativity for advanced undergraduates and first-year graduate students of applied mathematics and physical sciences. This book meets an overwhelming need for a book on modern differential geometry and relativity that is student-friendly, and which is also suitable for self-study. The book presumes a minimal level of mathematical maturity so that any student who has completed the standard Calculus sequence should be able to read and understand the book. The key features of the book are: Detailed solutions are provided to the Exercises in each chapter; Many of the missing steps that are often omitted from standard mathematical derivations have been provided to make the book easier to read and understand; A detailed introduction to Electrodynamics is provided so that the book is accessible to students who have not had a formal course in this area; In its treatment of modern differential geometry, the book employs both a modern, c...

  5. Geometry success in 20 minutes a day

    CERN Document Server

    LLC, LearningExpress

    2014-01-01

    Whether you're new to geometry or just looking for a refresher, Geometry Success in 20 Minutes a Day offers a 20-step lesson plan that provides quick and thorough instruction in practical, critical skills. Stripped of unnecessary math jargon but bursting with geometry essentials, Geometry Success in 20 Minutes a Day: Covers all vital geometry skills, from the basic building blocks of geometry to ratio, proportion, and similarity to trigonometry and beyond Provides hundreds of practice exercises in test format Applies geometr

  6. Algebraic Geometry and Number Theory Summer School

    CERN Document Server

    Sarıoğlu, Celal; Soulé, Christophe; Zeytin, Ayberk

    2017-01-01

    This lecture notes volume presents significant contributions from the “Algebraic Geometry and Number Theory” Summer School, held at Galatasaray University, Istanbul, June 2-13, 2014. It addresses subjects ranging from Arakelov geometry and Iwasawa theory to classical projective geometry, birational geometry and equivariant cohomology. Its main aim is to introduce these contemporary research topics to graduate students who plan to specialize in the area of algebraic geometry and/or number theory. All contributions combine main concepts and techniques with motivating examples and illustrative problems for the covered subjects. Naturally, the book will also be of interest to researchers working in algebraic geometry, number theory and related fields.

  7. Network geometry with flavor: From complexity to quantum geometry

    Science.gov (United States)

    Bianconi, Ginestra; Rahmede, Christoph

    2016-03-01

    Network geometry is attracting increasing attention because it has a wide range of applications, ranging from data mining to routing protocols in the Internet. At the same time advances in the understanding of the geometrical properties of networks are essential for further progress in quantum gravity. In network geometry, simplicial complexes describing the interaction between two or more nodes play a special role. In fact these structures can be used to discretize a geometrical d -dimensional space, and for this reason they have already been widely used in quantum gravity. Here we introduce the network geometry with flavor s =-1 ,0 ,1 (NGF) describing simplicial complexes defined in arbitrary dimension d and evolving by a nonequilibrium dynamics. The NGF can generate discrete geometries of different natures, ranging from chains and higher-dimensional manifolds to scale-free networks with small-world properties, scale-free degree distribution, and nontrivial community structure. The NGF admits as limiting cases both the Bianconi-Barabási models for complex networks, the stochastic Apollonian network, and the recently introduced model for complex quantum network manifolds. The thermodynamic properties of NGF reveal that NGF obeys a generalized area law opening a new scenario for formulating its coarse-grained limit. The structure of NGF is strongly dependent on the dimensionality d . In d =1 NGFs grow complex networks for which the preferential attachment mechanism is necessary in order to obtain a scale-free degree distribution. Instead, for NGF with dimension d >1 it is not necessary to have an explicit preferential attachment rule to generate scale-free topologies. We also show that NGF admits a quantum mechanical description in terms of associated quantum network states. Quantum network states evolve by a Markovian dynamics and a quantum network state at time t encodes all possible NGF evolutions up to time t . Interestingly the NGF remains fully classical but

  8. Towards a Nano Geometry? Geometry and Dynamics on Nano Scale

    CERN Document Server

    Booss-Bavnbek, Bernhelm

    2012-01-01

    This paper applies I.M. Gelfand's distinction between adequate and non-adequate use of mathematical language in different contexts to the newly opened window of model-based measurements of intracellular dynamics. The specifics of geometry and dynamics on the mesoscale of cell physiology are elaborated - in contrast to the familiar Newtonian mechanics and the more recent, but by now also rather well established quantum field theories. Examples are given originating from the systems biology of insulin secreting pancreatic beta-cells and the mathematical challenges of an envisioned non-invasive control of magnetic nanoparticles.

  9. A Whirlwind Tour of Computational Geometry.

    Science.gov (United States)

    Graham, Ron; Yao, Frances

    1990-01-01

    Described is computational geometry which used concepts and results from classical geometry, topology, combinatorics, as well as standard algorithmic techniques such as sorting and searching, graph manipulations, and linear programing. Also included are special techniques and paradigms. (KR)

  10. Generalised Complex Geometry in Thermodynamical Fluctuation Theory

    Directory of Open Access Journals (Sweden)

    P. Fernández de Córdoba

    2015-08-01

    Full Text Available We present a brief overview of some key concepts in the theory of generalized complex manifolds. This new geometry interpolates, so to speak, between symplectic geometry and complex geometry. As such it provides an ideal framework to analyze thermodynamical fluctuation theory in the presence of gravitational fields. To illustrate the usefulness of generalized complex geometry, we examine a simplified version of the Unruh effect: the thermalising effect of gravitational fields on the Schroedinger wavefunction.

  11. Geometry in the Early Years: A Commentary

    Science.gov (United States)

    Dindyal, Jaguthsing

    2015-01-01

    The primary goal of this paper is to provide a commentary on the teaching and learning of geometry in the early years of schooling with the set of papers in this issue as a guiding factor. It is structured around issues about geometry education of young learners, such as: what should we teach in geometry and why; representation of geometrical…

  12. Students' Misconceptions and Errors in Transformation Geometry

    Science.gov (United States)

    Ada, Tuba; Kurtulus, Aytac

    2010-01-01

    This study analyses the students' performances in two-dimensional transformation geometry and explores the mistakes made by the students taking the analytic geometry course given by researchers. An examination was given to students of Education Faculties who have taken the analytic geometry course at Eskisehir Osmangazi University in Turkey. The…

  13. Global continuation for distance geometry problems

    Energy Technology Data Exchange (ETDEWEB)

    More, J.J.; Wu, Zhijun

    1995-03-01

    Distance geometry problems arise in the interpretation of NMR data and in the determination of protein structure. The authors formulate the distance geometry problem as a global minimization problem with special structure, and show the global smoothing techniques and a continuation approach for global optimization can be used to determine solutions of distance geometry problems with a nearly 100% probability of success.

  14. Geometry in the Early Years: A Commentary

    Science.gov (United States)

    Dindyal, Jaguthsing

    2015-01-01

    The primary goal of this paper is to provide a commentary on the teaching and learning of geometry in the early years of schooling with the set of papers in this issue as a guiding factor. It is structured around issues about geometry education of young learners, such as: what should we teach in geometry and why; representation of geometrical…

  15. Number Theory, Analysis and Geometry

    CERN Document Server

    Goldfeld, Dorian; Jones, Peter

    2012-01-01

    Serge Lang was an iconic figure in mathematics, both for his own important work and for the indelible impact he left on the field of mathematics, on his students, and on his colleagues. Over the course of his career, Lang traversed a tremendous amount of mathematical ground. As he moved from subject to subject, he found analogies that led to important questions in such areas as number theory, arithmetic geometry, and the theory of negatively curved spaces. Lang's conjectures will keep many mathematicians occupied far into the future. In the spirit of Lang's vast contribution to mathematics, th

  16. Integral geometry and representation theory

    CERN Document Server

    Gel'fand, I M; Vilenkin, N Ya

    1966-01-01

    Generalized Functions, Volume 5: Integral Geometry and Representation Theory is devoted to the theory of representations, focusing on the group of two-dimensional complex matrices of determinant one.This book emphasizes that the theory of representations is a good example of the use of algebraic and geometric methods in functional analysis, in which transformations are performed not on the points of a space, but on the functions defined on it. The topics discussed include Radon transform on a real affine space, integral transforms in the complex domain, and representations of the group of comp

  17. Porous media geometry and transports

    CERN Document Server

    Adler, Pierre

    1992-01-01

    The goal of ""Porous Media: Geometry and Transports"" is to provide the basis of a rational and modern approach to porous media. This book emphasizes several geometrical structures (spatially periodic, fractal, and random to reconstructed) and the three major single-phase transports (diffusion, convection, and Taylor dispersion).""Porous Media"" serves various purposes. For students it introduces basic information on structure and transports. Engineers will find this book useful as a readily accessible assemblage of al the major experimental results pertaining to single-phase tr

  18. Stochastic geometry for image analysis

    CERN Document Server

    Descombes, Xavier

    2013-01-01

    This book develops the stochastic geometry framework for image analysis purpose. Two main frameworks are  described: marked point process and random closed sets models. We derive the main issues for defining an appropriate model. The algorithms for sampling and optimizing the models as well as for estimating parameters are reviewed.  Numerous applications, covering remote sensing images, biological and medical imaging, are detailed.  This book provides all the necessary tools for developing an image analysis application based on modern stochastic modeling.

  19. Adding momentum to supersymmetric geometries

    Energy Technology Data Exchange (ETDEWEB)

    Lunin, Oleg, E-mail: olunin@albany.edu [Department of Physics, University at Albany (SUNY), Albany, NY 12222 (United States); Mathur, Samir D., E-mail: mathur.16@osu.edu [Department of Physics, Ohio State University, Columbus, OH 43210 (United States); Turton, David, E-mail: turton.7@osu.edu [Department of Physics, Ohio State University, Columbus, OH 43210 (United States)

    2013-03-11

    We consider general supersymmetric solutions to minimal supergravity in six dimensions, trivially lifted to IIB supergravity. To any such solution we add a traveling wave deformation involving the additional directions. The deformed solution is given in terms of a function which is harmonic in the background geometry. We also present a family of explicit examples describing microstates of the D1-D5 system on T{sup 4}. In the case where the background contains a large AdS region, the deformation is identified as corresponding to an action of a U(1) current of the D1-D5 orbifold CFT on a given state.

  20. Adding momentum to supersymmetric geometries

    CERN Document Server

    Lunin, Oleg; Turton, David

    2012-01-01

    We consider general supersymmetric solutions to minimal supergravity in six dimensions, trivially lifted to IIB supergravity. To any such solution we add a travelling-wave deformation involving the additional directions. The deformed solution is given in terms of a function which is harmonic in the background geometry. We also present a family of explicit examples describing microstates of the D1-D5 system on T^4. In the case where the background contains a large AdS region, the deformation is identified as corresponding to an action of a U(1) current of the D1-D5 orbifold CFT on a given state.

  1. Projective geometry and projective metrics

    CERN Document Server

    Busemann, Herbert

    2005-01-01

    The basic results and methods of projective and non-Euclidean geometry are indispensable for the geometer, and this book--different in content, methods, and point of view from traditional texts--attempts to emphasize that fact. Results of special theorems are discussed in detail only when they are needed to develop a feeling for the subject or when they illustrate a general method. On the other hand, an unusual amount of space is devoted to the discussion of the fundamental concepts of distance, motion, area, and perpendicularity.Topics include the projective plane, polarities and conic sectio

  2. Loop quantum geometry: a primer

    Energy Technology Data Exchange (ETDEWEB)

    Corichi, Alejandro [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, A. Postal 70-543, Mexico D.F. 04510 (Mexico)

    2005-01-15

    This is the written version of a lecture given at the 'VI Mexican School of Gravitation and Mathematical Physics' (Nov 21-27, 2004, Playa del Carmen, Mexico), introducing the basics of Loop Quantum Geometry. The purpose of the written contribution is to provide a Primer version, that is, a first entry into Loop Quantum Gravity and to present at the same time a friendly guide to the existing pedagogical literature on the subject. This account is geared towards graduate students and non-experts interested in learning the basics of the subject.

  3. Exceptional geometry and Borcherds superalgebras

    CERN Document Server

    Palmkvist, Jakob

    2015-01-01

    We study generalized diffeomorphisms in exceptional geometry with U-duality group E_{n(n)} from an algebraic point of view. By extending the Lie algebra e_n to an infinite-dimensional Borcherds superalgebra, involving also the extension to e_{n+1}, the generalized Lie derivatives can be expressed in a simple way, and the expressions take the same form for any n less than 8. The closure of the transformations then follows from the Jacobi identity and the grading of e_{n+1} with respect to e_n.

  4. Bondi accretion in trumpet geometries

    Science.gov (United States)

    Miller, August J.; Baumgarte, Thomas W.

    2017-02-01

    The Bondi solution, which describes the radial inflow of a gas onto a non-rotating black hole, provides a powerful test for numerical relativistic codes. However, the Bondi solution is usually derived in Schwarzschild coordinates, which are not well suited for dynamical spacetime evolutions. Instead, many current numerical relativistic codes adopt moving-puncture coordinates, which render black holes in trumpet geometries. Here we transform the Bondi solution into trumpet coordinates, which result in regular expressions for the fluid flow extending into the black-hole interior. We also evolve these solutions numerically and demonstrate their usefulness for testing and calibrating numerical codes.

  5. Complexity and Shock Wave Geometries

    CERN Document Server

    Stanford, Douglas

    2014-01-01

    In this paper we refine a conjecture relating the time-dependent size of an Einstein-Rosen bridge to the computational complexity of the of the dual quantum state. Our refinement states that the complexity is proportional to the spatial volume of the ERB. More precisely, up to an ambiguous numerical coefficient, we propose that the complexity is the regularized volume of the largest codimension one surface crossing the bridge, divided by $G_N l_{AdS}$. We test this conjecture against a wide variety of spherically symmetric shock wave geometries in different dimensions. We find detailed agreement.

  6. Loop Quantum Geometry: A primer

    OpenAIRE

    Corichi, Alejandro

    2005-01-01

    This is the written version of a lecture given at the ``VI Mexican School of Gravitation and Mathematical Physics" (Nov 21-27, 2004, Playa del Carmen, Mexico), introducing the basics of Loop Quantum Geometry. The purpose of the written contribution is to provide a Primer version, that is, a first entry into Loop Quantum Gravity and to present at the same time a friendly guide to the existing pedagogical literature on the subject. This account is geared towards graduate students and non-expert...

  7. Isosurfaces geometry, topology, and algorithms

    CERN Document Server

    Wenger, Rephael

    2013-01-01

    Ever since Lorensen and Cline published their paper on the Marching Cubes algorithm, isosurfaces have been a standard technique for the visualization of 3D volumetric data. Yet there is no book exclusively devoted to isosurfaces. Isosurfaces: Geometry, Topology, and Algorithms represents the first book to focus on basic algorithms for isosurface construction. It also gives a rigorous mathematical perspective on some of the algorithms and results. In color throughout, the book covers the Marching Cubes algorithm and variants, dual contouring algorithms, multilinear interpolation, multiresolutio

  8. Quanta of geometry and unification

    Science.gov (United States)

    Chamseddine, Ali H.

    2016-11-01

    This is a tribute to Abdus Salam’s memory whose insight and creative thinking set for me a role model to follow. In this contribution I show that the simple requirement of volume quantization in spacetime (with Euclidean signature) uniquely determines the geometry to be that of a noncommutative space whose finite part is based on an algebra that leads to Pati-Salam grand unified models. The Standard Model corresponds to a special case where a mathematical constraint (order one condition) is satisfied. This provides evidence that Salam was a visionary who was generations ahead of his time.

  9. Quanta of Geometry and Unification

    CERN Document Server

    Chamseddine, Ali H

    2016-01-01

    This is a tribute to Abdus Salam's memory whose insight and creative thinking set for me a role model to follow. In this contribution I show that the simple requirement of volume quantization in space-time (with Euclidean signature) uniquely determines the geometry to be that of a noncommutative space whose finite part is based on an algebra that leads to Pati-Salam grand unified models. The Standard Model corresponds to a special case where a mathematical constraint (order one condition) is satisfied. This provides evidence that Salam was a visionary who was generations ahead of his time.

  10. Geometry-dependent distributed polarizability models for the water molecule

    Energy Technology Data Exchange (ETDEWEB)

    Loboda, Oleksandr; Ingrosso, Francesca; Ruiz-López, Manuel F.; Millot, Claude [Université de Lorraine, SRSMC UMR 7565, Vandoeuvre-les-Nancy F-54506 (France); CNRS, SRSMC UMR 7565, Vandoeuvre-les-Nancy F-54506 (France); Szalewicz, Krzysztof [Department of Physics and Astronomy, University of Delaware, Newark, Delaware 19716 (United States)

    2016-01-21

    Geometry-dependent distributed polarizability models have been constructed by fits to ab initio calculations at the coupled cluster level of theory with up to noniterative triple excitations in an augmented triple-zeta quality basis set for the water molecule in the field of a point charge. The investigated models include (i) charge-flow polarizabilities between chemically bonded atoms, (ii) isotropic or anisotropic dipolar polarizabilities on oxygen atom or on all atoms, and (iii) combinations of models (i) and (ii). For each model, the polarizability parameters have been optimized to reproduce the induction energy of a water molecule polarized by a point charge successively occupying a grid of points surrounding the molecule. The quality of the models is ascertained by examining their ability to reproduce these induction energies as well as the molecular dipolar and quadrupolar polarizabilities. The geometry dependence of the distributed polarizability models has been explored by changing bond lengths and HOH angle to generate 125 molecular structures (reduced to 75 symmetry-unique ones). For each considered model, the distributed polarizability components have been fitted as a function of the geometry by a Taylor expansion in monomer coordinate displacements up to the sum of powers equal to 4.

  11. Geometry-induced rigidity in pressurized elastic shells

    Science.gov (United States)

    Reis, Pedro; Florijn, Bastiaan; Lazarus, Arnaud

    2012-02-01

    We study the indentation of pressurized thin elastic shells, with positive Gauss curvature. In our precision desktop-scale experiments, the geometry of the shells and their material properties are custom-controlled using rapid prototyping and digital fabrication techniques. The mechanical response is quantified through load-displacement compression tests and the differential pressure is set by a syringe-pump system under feedback control. Focus is given to the linear regime of the response towards quantifying the geometry-induced rigidity of pressurized shells with different shapes. We find that this effective stiffness is proportional to the local mean curvature in the neighborhood of the locus of indentation. Combining classic theory of shells with recent developments by D. Vella et al. (2011), we rationalize the dependence of the geometry-induced rigidity on: i) the mean curvature at the point of indentation, ii) the material properties of the shell and iii) the in-out differential pressure. The proposed predictive framework is in excellent agreement with our experiments, over a wide range of control parameters. The prominence of geometry in this class of problems points to the relevance and applicability of our results over a wide range of lengthscales.

  12. A topological sigma model of biKaehler geometry

    Energy Technology Data Exchange (ETDEWEB)

    Zucchini, Roberto [Dipartimento di Fisica, Universita degli Studi di Bologna, V. Irnerio 46, I-40126 Bologna (Italy); I.N.F.N., sezione di Bologna (Italy)

    2006-01-15

    BiKaehler geometry is characterized by a riemannian metric g{sub ab} and two covariantly constant generally non commuting complex structures K{sub {+-}}{sup a}{sub b}, with respect to which g{sub ab} is hermitean. It is a particular case of the bihermitean geometry of Gates, Hull and Roceck, the most general sigma model target space geometry allowing for (2,2) world sheet supersymmetry. We present a sigma model for biKaehler geometry that is topological in the following sense: i) the action is invariant under a fermionic symmetry {delta}; ii) {delta} is nilpotent on shell; iii) the action is {delta}-exact on shell up to a topological term; iv) the resulting field theory depends only on a subset of the target space geometrical data. The biKaehler sigma model is obtainable by gauge fixing the Hitchin model with generalized Kaehler target space. It further contains the customary A topological sigma model as a particular case. However, it is not seemingly related to the (2,2) supersymmetric biKaehler sigma model by twisting in general.

  13. A topological sigma model of biKaehler geometry

    CERN Document Server

    Zucchini, R

    2006-01-01

    BiKaehler geometry is characterized by a Riemannian metric g_{ab} and two covariantly constant generally non commuting complex structures K_+^a_b, K_-^a_b, with respect to which g_{ab} is Hermitian. It is a particular case of the biHermitian geometry of Gates, Hull and Roceck, the most general sigma model target space geometry allowing for (2,2) world sheet supersymmetry. We present a sigma model for biKaehler geometry that is topological in the following sense: i) the action is invariant under a fermionic symmetry delta; ii) delta is nilpotent on shell; iii) the action is delta--exact on shell up to a topological term; iv) the resulting field theory depends only on a subset of the target space geometrical data. The biKaehler sigma model is obtainable by gauge fixing the Hitchin model with generalized Kaehler target space. It further contains the customary A topological sigma model as a particular case. However, it is not seemingly related to the (2,2) supersymmetric biKaehler sigma model by twisting in gener...

  14. Three-dimensional representation of complex muscle architectures and geometries.

    Science.gov (United States)

    Blemker, Silvia S; Delp, Scott L

    2005-05-01

    Almost all computer models of the musculoskeletal system represent muscle geometry using a series of line segments. This simplification (i) limits the ability of models to accurately represent the paths of muscles with complex geometry and (ii) assumes that moment arms are equivalent for all fibers within a muscle (or muscle compartment). The goal of this work was to develop and evaluate a new method for creating three-dimensional (3D) finite-element models that represent complex muscle geometry and the variation in moment arms across fibers within a muscle. We created 3D models of the psoas, iliacus, gluteus maximus, and gluteus medius muscles from magnetic resonance (MR) images. Peak fiber moment arms varied substantially among fibers within each muscle (e.g., for the psoas the peak fiber hip flexion moment arms varied from 2 to 3 cm, and for the gluteus maximus the peak fiber hip extension moment arms varied from 1 to 7 cm). Moment arms from the literature were generally within the range of fiber moment arms predicted by the 3D models. The models accurately predicted changes in muscle surface geometry over a 55 degrees range of hip flexion, as compared to changes in shape predicted from MR images (average errors between the model and measured surfaces were between 1.7 and 5.2 mm). This new framework for representing muscle will enhance the accuracy of computer models of the musculoskeletal system.

  15. Casimir effects for classical and quantum liquids in slab geometry: A brief review

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Shyamal, E-mail: sbsp@uohyd.ac.in [School of Physics, University of Hyderabad, C.R. Rao Road, Gachibowli, Hyderabad-500046 (India)

    2015-05-15

    We analytically explore Casimir effects for confinement of classical and quantum fluctuations in slab (film) geometry (i) for classical (critical) fluctuations over {sup 4}He liquid around the λ point, and (ii) for quantum (phonon) fluctuations of Bogoliubov excitations over an interacting Bose-Einstein condensate. We also briefly review Casimir effects for confinement of quantum vacuum fluctuations confined to two plates of different geometries.

  16. Foundations of arithmetic differential geometry

    CERN Document Server

    Buium, Alexandru

    2017-01-01

    The aim of this book is to introduce and develop an arithmetic analogue of classical differential geometry. In this new geometry the ring of integers plays the role of a ring of functions on an infinite dimensional manifold. The role of coordinate functions on this manifold is played by the prime numbers. The role of partial derivatives of functions with respect to the coordinates is played by the Fermat quotients of integers with respect to the primes. The role of metrics is played by symmetric matrices with integer coefficients. The role of connections (respectively curvature) attached to metrics is played by certain adelic (respectively global) objects attached to the corresponding matrices. One of the main conclusions of the theory is that the spectrum of the integers is "intrinsically curved"; the study of this curvature is then the main task of the theory. The book follows, and builds upon, a series of recent research papers. A significant part of the material has never been published before.

  17. Quanta of Geometry: Noncommutative Aspects

    Science.gov (United States)

    Chamseddine, Ali H.; Connes, Alain; Mukhanov, Viatcheslav

    2015-03-01

    In the construction of spectral manifolds in noncommutative geometry, a higher degree Heisenberg commutation relation involving the Dirac operator and the Feynman slash of real scalar fields naturally appears and implies, by equality with the index formula, the quantization of the volume. We first show that this condition implies that the manifold decomposes into disconnected spheres, which will represent quanta of geometry. We then refine the condition by involving the real structure and two types of geometric quanta, and show that connected spin manifolds with large quantized volume are then obtained as solutions. The two algebras M2(H ) and M4(C ) are obtained, which are the exact constituents of the standard model. Using the two maps from M4 to S4 the four-manifold is built out of a very large number of the two kinds of spheres of Planckian volume. We give several physical applications of this scheme such as quantization of the cosmological constant, mimetic dark matter, and area quantization of black holes.

  18. Warped Geometry of Brane Worlds

    CERN Document Server

    Felder, G; Kofman, L A; Felder, Gary; Frolov, Andrei; Kofman, Lev

    2002-01-01

    We study the dynamical equations for a warp factor and a bulk scalar in 5d brane world scenarios. These equations are similar to those for the time dependence of the scale factor and a scalar field in 4d cosmology, but with the sign of the scalar field potential reversed. Based on this analogy, we introduce two novel methods for studying the warped geometry. First, we construct the full phase portraits of the warp factor/scalar system for several examples of the bulk potential. This allows us to view the global properties of the warped geometry. For flat branes, the phase portrait is two dimensional. Moving along typical phase trajectories, the warp factor is initially increasing and finally decreasing. All trajectories have timelike gradient-dominated singularities at one or both of their ends, which are reachable in a finite distance and must be screened by the branes. For curved branes, the phase portrait is three dimensional. However, as the warp factor increases the phase trajectories tend towards the tw...

  19. Weyl gravity and Cartan geometry

    Science.gov (United States)

    Attard, J.; François, J.; Lazzarini, S.

    2016-04-01

    We point out that the Cartan geometry known as the second-order conformal structure provides a natural differential geometric framework underlying gauge theories of conformal gravity. We are concerned with two theories: the first one is the associated Yang-Mills-like Lagrangian, while the second, inspired by [1], is a slightly more general one that relaxes the conformal Cartan geometry. The corresponding gauge symmetry is treated within the Becchi-Rouet-Stora-Tyutin language. We show that the Weyl gauge potential is a spurious degree of freedom, analogous to a Stueckelberg field, that can be eliminated through the dressing field method. We derive sets of field equations for both the studied Lagrangians. For the second one, they constrain the gauge field to be the "normal conformal Cartan connection.''Finally, we provide in a Lagrangian framework a justification of the identification, in dimension 4, of the Bach tensor with the Yang-Mills current of the normal conformal Cartan connection, as proved in [2].

  20. Geometry and the Quantum: Basics

    CERN Document Server

    Chamseddine, Ali H; Mukhanov, Viatcheslav

    2014-01-01

    Motivated by the construction of spectral manifolds in noncommutative geometry, we introduce a higher degree Heisenberg commutation relation involving the Dirac operator and the Feynman slash of scalar fields. This commutation relation appears in two versions, one sided and two sided. It implies the quantization of the volume. In the one-sided case it implies that the manifold decomposes into a disconnected sum of spheres which will represent quanta of geometry. The two sided version in dimension 4 predicts the two algebras M_2(H) and M_4(C) which are the algebraic constituents of the Standard Model of particle physics. This taken together with the non-commutative algebra of functions allows one to reconstruct, using the spectral action, the Lagrangian of gravity coupled with the Standard Model. We show that any connected Riemannian Spin 4-manifold with quantized volume >4 (in suitable units) appears as an irreducible representation of the two-sided commutation relations in dimension 4 and that these represen...

  1. Fuzzy Logic for Incidence Geometry.

    Science.gov (United States)

    Tserkovny, Alex

    The paper presents a mathematical framework for approximate geometric reasoning with extended objects in the context of Geography, in which all entities and their relationships are described by human language. These entities could be labelled by commonly used names of landmarks, water areas, and so forth. Unlike single points that are given in Cartesian coordinates, these geographic entities are extended in space and often loosely defined, but people easily perform spatial reasoning with extended geographic objects "as if they were points." Unfortunately, up to date, geographic information systems (GIS) miss the capability of geometric reasoning with extended objects. The aim of the paper is to present a mathematical apparatus for approximate geometric reasoning with extended objects that is usable in GIS. In the paper we discuss the fuzzy logic (Aliev and Tserkovny, 2011) as a reasoning system for geometry of extended objects, as well as a basis for fuzzification of the axioms of incidence geometry. The same fuzzy logic was used for fuzzification of Euclid's first postulate. Fuzzy equivalence relation "extended lines sameness" is introduced. For its approximation we also utilize a fuzzy conditional inference, which is based on proposed fuzzy "degree of indiscernibility" and "discernibility measure" of extended points.

  2. Toric Geometry and String Theory

    CERN Document Server

    Bouchard, Vincent

    2006-01-01

    In this thesis we probe various interactions between toric geometry and string theory. First, the notion of a top was introduced by Candelas and Font as a useful tool to investigate string dualities. These objects torically encode the local geometry of a degeneration of an elliptic fibration. We classify all tops and give a prescription for assigning an affine, possibly twisted Kac-Moody algebra to any such top. Tops related to twisted Kac-Moody algebras can be used to construct string compactifications with reduced rank of the gauge group. Secondly, we compute all loop closed and open topological string amplitudes on orientifolds of toric Calabi-Yau threefolds, by using geometric transitions involving SO/Sp Chern-Simons theory, localization on the moduli space of holomorphic maps with involution, and the topological vertex. In particular, we count Klein bottles and projective planes with any number of handles in some Calabi-Yau orientifolds. We determine the BPS structure of the amplitudes, and illustrate ou...

  3. Ring polymers in confined geometries

    CERN Document Server

    Usatenko, Z; Kuterba, P

    2016-01-01

    The investigation of a dilute solution of phantom ideal ring polymers and ring polymers with excluded volume interactions (EVI) in a good solvent confined in a slit geometry of two parallel repulsive walls and in a solution of colloidal particles of big size were performed. Taking into account the correspondence between the field theoretical $\\phi^4$ $O(n)$-vector model in the limit $n\\to 0$ and the behavior of long-flexible polymer chains in a good solvent the correspondent depletion interaction potentials, depletion forces and the forces which exert phantom ideal ring and ring polymer chains with EVI on the walls were obtained in the framework of the massive field theory approach at fixed space dimensions d=3 up to one-loop order. Additionally, the investigation of a dilute solution of phantom ideal ring polymers in a slit geometry of two inert walls and mixed walls with one repulsive and other one inert wall were performed and correspondent depletion interaction potentials and the depletion forces were cal...

  4. Fuzzy Logic for Incidence Geometry

    Science.gov (United States)

    2016-01-01

    The paper presents a mathematical framework for approximate geometric reasoning with extended objects in the context of Geography, in which all entities and their relationships are described by human language. These entities could be labelled by commonly used names of landmarks, water areas, and so forth. Unlike single points that are given in Cartesian coordinates, these geographic entities are extended in space and often loosely defined, but people easily perform spatial reasoning with extended geographic objects “as if they were points.” Unfortunately, up to date, geographic information systems (GIS) miss the capability of geometric reasoning with extended objects. The aim of the paper is to present a mathematical apparatus for approximate geometric reasoning with extended objects that is usable in GIS. In the paper we discuss the fuzzy logic (Aliev and Tserkovny, 2011) as a reasoning system for geometry of extended objects, as well as a basis for fuzzification of the axioms of incidence geometry. The same fuzzy logic was used for fuzzification of Euclid's first postulate. Fuzzy equivalence relation “extended lines sameness” is introduced. For its approximation we also utilize a fuzzy conditional inference, which is based on proposed fuzzy “degree of indiscernibility” and “discernibility measure” of extended points. PMID:27689133

  5. Weyl gravity and Cartan geometry

    CERN Document Server

    Attard, Jeremy; Lazzarini, Serge

    2015-01-01

    We point out that the Cartan geometry known as the second-order conformal structure provides a natural differential geometric framework underlying gauge theories of conformal gravity. We are concerned by two theories: the first one will be the associated Yang-Mills-like Lagrangian, while the second, inspired by~\\cite{Wheeler2014}, will be a slightly more general one which will relax the conformal Cartan geometry. The corresponding gauge symmetry is treated within the BRST language. We show that the Weyl gauge potential is a spurious degree of freedom, analogous to a Stueckelberg field, that can be eliminated through the dressing field method. We derive sets of field equations for both the studied Lagrangians. For the second one, they constrain the gauge field to be the `normal conformal Cartan connection'. Finally, we provide in a Lagrangian framework a justification of the identification, in dimension $4$, of the Bach tensor with the Yang-Mills current of the normal conformal Cartan connection, as proved in ...

  6. Differential geometry based multiscale models.

    Science.gov (United States)

    Wei, Guo-Wei

    2010-08-01

    Large chemical and biological systems such as fuel cells, ion channels, molecular motors, and viruses are of great importance to the scientific community and public health. Typically, these complex systems in conjunction with their aquatic environment pose a fabulous challenge to theoretical description, simulation, and prediction. In this work, we propose a differential geometry based multiscale paradigm to model complex macromolecular systems, and to put macroscopic and microscopic descriptions on an equal footing. In our approach, the differential geometry theory of surfaces and geometric measure theory are employed as a natural means to couple the macroscopic continuum mechanical description of the aquatic environment with the microscopic discrete atomistic description of the macromolecule. Multiscale free energy functionals, or multiscale action functionals are constructed as a unified framework to derive the governing equations for the dynamics of different scales and different descriptions. Two types of aqueous macromolecular complexes, ones that are near equilibrium and others that are far from equilibrium, are considered in our formulations. We show that generalized Navier-Stokes equations for the fluid dynamics, generalized Poisson equations or generalized Poisson-Boltzmann equations for electrostatic interactions, and Newton's equation for the molecular dynamics can be derived by the least action principle. These equations are coupled through the continuum-discrete interface whose dynamics is governed by potential driven geometric flows. Comparison is given to classical descriptions of the fluid and electrostatic interactions without geometric flow based micro-macro interfaces. The detailed balance of forces is emphasized in the present work. We further extend the proposed multiscale paradigm to micro-macro analysis of electrohydrodynamics, electrophoresis, fuel cells, and ion channels. We derive generalized Poisson-Nernst-Planck equations that are

  7. 6D microstate geometries from 10D structures

    Energy Technology Data Exchange (ETDEWEB)

    Giusto, Stefano, E-mail: stefano.giusto@pd.infn.it [Dipartimento di Fisica e Astronomia “Galileo Galilei”, Università di Padova, Via Marzolo 8, 35131 Padova (Italy); I.N.F.N. Sezione di Padova, Via Marzolo 8, 35131 Padova (Italy); Martucci, Luca, E-mail: luca.martucci@pd.infn.it [Dipartimento di Fisica e Astronomia “Galileo Galilei”, Università di Padova, Via Marzolo 8, 35131 Padova (Italy); I.N.F.N. Sezione di Padova, Via Marzolo 8, 35131 Padova (Italy); Petrini, Michela, E-mail: petrini@lpthe.jussieu.fr [Laboratoire de Physique Théorique et Hautes Energies, Université Pierre et Marie Curie, CNRS UMR 7589, F-75252 Paris Cedex 05 (France); Russo, Rodolfo, E-mail: r.russo@qmul.ac.uk [Centre for Research in String Theory, School of Physics and Astronomy Queen Mary University of London, Mile End Road, London, E1 4NS (United Kingdom)

    2013-11-11

    We use the formalism of Generalised Geometry to characterise in general the supersymmetric backgrounds in type II supergravity that have a null Killing vector. We then specify this analysis to configurations that preserve the same supersymmetries as the D1–D5–P system compactified on a four-manifold. We give a set of equations on the forms defining the supergravity background that are equivalent to the supersymmetry constraints and the equations of motion. This study is motivated by the search of new microstate geometries for the D1–D5–P black hole. As an example, we rewrite the linearised three-charge solution of (arXiv:hep-th/0311092) in our formalism and show how to extend it to a non-linear, regular and asymptotically flat configuration.

  8. On the Microscopic Perspective of Black Branes Thermodynamic Geometry

    Directory of Open Access Journals (Sweden)

    Stefano Bellucci

    2010-09-01

    Full Text Available We study thermodynamic state-space geometry of the black holes in string theory and M-theory. For a large number of microstates, we analyze the intrinsic state-space geometry for (i extremal and non-extremal black branes in string theory, (ii multi-centered black brane configurations, (iv small black holes with fractional branes, and (v fuzzy rings in the setup of Mathur’s fuzzballs and subensemble theory. We extend our analysis for the black brane foams and bubbling black brane solutions in M-theory. We discuss the nature of state-space correlations of various black brane configurations, and show that the notion of state-space manifolds describes the associated coarse-grained interactions of the corresponding microscopic CFT data.

  9. On Geometry and Matrix Models

    CERN Document Server

    Dijkgraaf, R; Dijkgraaf, Robbert; Vafa, Cumrun

    2002-01-01

    We point out two extensions of the relation between matrix models, topological strings and N=1 supersymmetric gauge theories. First, we note that by considering double scaling limits of unitary matrix models one can obtain large N duals of the local Calabi-Yau geometries that engineer N=2 gauge theories. In particular, a double scaling limit of the Gross-Witten one-plaquette lattice model gives the SU(2) Seiberg-Witten solution, including its induced gravitational corrections. Secondly, we point out that the effective superpotential terms for N=1 ADE quiver gauge theories is similarly computed by large multi-matrix models, that have been considered in the context of ADE minimal models on random surfaces. The associated spectral curves are multiple branched covers obtained as Virasoro and W-constraints of the partition function.

  10. On geometry and matrix models

    Science.gov (United States)

    Dijkgraaf, Robbert; Vafa, Cumrun

    2002-11-01

    We point out two extensions of the relation between matrix models, topological strings and N=1 supersymmetric gauge theories. First, we note that by considering double scaling limits of unitary matrix models one can obtain large- N duals of the local Calabi-Yau geometries that engineer N=2 gauge theories. In particular, a double scaling limit of the Gross-Witten one-plaquette lattice model gives the SU(2) Seiberg-Witten solution, including its induced gravitational corrections. Secondly, we point out that the effective superpotential terms for N=1 ADE quiver gauge theories is similarly computed by large- N multi-matrix models, that have been considered in the context of ADE minimal models on random surfaces. The associated spectral curves are multiple branched covers obtained as Virasoro and W-constraints of the partition function.

  11. On geometry and matrix models

    Energy Technology Data Exchange (ETDEWEB)

    Dijkgraaf, Robbert E-mail: rhd@science.uva.nl; Vafa, Cumrun

    2002-11-11

    We point out two extensions of the relation between matrix models, topological strings and N=1 supersymmetric gauge theories. First, we note that by considering double scaling limits of unitary matrix models one can obtain large-N duals of the local Calabi-Yau geometries that engineer N=2 gauge theories. In particular, a double scaling limit of the Gross-Witten one-plaquette lattice model gives the SU(2) Seiberg-Witten solution, including its induced gravitational corrections. Secondly, we point out that the effective superpotential terms for N=1 ADE quiver gauge theories is similarly computed by large-N multi-matrix models, that have been considered in the context of ADE minimal models on random surfaces. The associated spectral curves are multiple branched covers obtained as Virasoro and W-constraints of the partition function.

  12. The noncommutative geometry of Zitterbewegung

    CERN Document Server

    Eckstein, Michał; Miller, Tomasz

    2016-01-01

    Based on the mathematics of noncommutative geometry, we model a 'classical' Dirac fermion propagating in a curved spacetime. We demonstrate that the inherent causal structure of the model encodes the possibility of Zitterbewegung - the 'trembling motion' of the fermion. We recover the well-known frequency of Zitterbewegung as the highest possible speed of change in the fermion's 'internal space'. Furthermore, we show that the latter does not change in the presence of an external electromagnetic field and derive its explicit analogue when the mass parameter is promoted to a Higgs-like field. We discuss a table-top experiment in the domain of quantum simulation to test the predictions of the model and outline the consequences of our model for quantum gauge theories.

  13. Holographic thermalization in noncommutative geometry

    CERN Document Server

    Zeng, Xiao-Xiong; Liu, Wen-Biao

    2014-01-01

    Gravitational collapse of a dust shell in noncommutative geometry is probed by the renormalized geodesic length and minimal area surface, which are dual to the two-point correlation function and expectation value of Wilson loop in the dual conformal field theory. For the spacetime without a horizon, we find the shell will not collapse all the time but will stop in a stable state. For the spacetime with a horizon, we investigate how the noncommutative parameter affects the thermalization process in detail. From the numeric results, we find that larger the noncommutative parameter is, longer the thermalization time is, which implies that the large noncommutative parameter delays the thermalization process. From the fitted functions of the thermalization curve, we find for both thermalization probes, there is a phase transition point during the thermalization process, which divides the thermalization into an acceleration phase and a deceleration phase. During the acceleration phase, the acceleration is found to ...

  14. Geometry of Spinning Ellis Wormholes

    CERN Document Server

    Chew, Xiao Yan; Kunz, Jutta

    2016-01-01

    We give a detailed account of the properties of spinning Ellis wormholes, supported by a phantom field. The general set of solutions depends on three parameters, associated with the size of the throat, the rotation and the symmetry of the solutions. For symmetric wormholes the global charges possess the same values in both asymptotic regions, while this is no longer the case for non-symmetric wormholes. We present mass formulae for these wormholes, study their quadrupole moments, and discuss the geometry of their throat and their ergoregion. We demonstrate, that these wormholes possess limiting configurations corresponding to an extremal Kerr black hole. Moreover, we analyze the geodesics of these wormholes, and show that they possess bound orbits.

  15. Interactive graphics for geometry modeling

    Science.gov (United States)

    Wozny, M. J.

    1984-01-01

    An interactive vector capability to create geometry and a raster color shaded rendering capability to sample and verify interim geometric design steps through color snapshots is described. The development is outlined of the underlying methodology which facilitates computer aided engineering and design. At present, raster systems cannot match the interactivity and line-drawing capability of refresh vector systems. Consequently, an intermediate step in mechanical design is used to create objects interactively on the vector display and then scan convert the wireframe model to render it as a color shaded object on a raster display. Several algorithms are presented for rendering such objects. Superquadric solid primitive extend the class of primitives normally used in solid modelers.

  16. Dialogues about geometry and light

    CERN Document Server

    Bermudez, David; Leonhardt, Ulf

    2015-01-01

    Throughout human history, people have used sight to learn about the world, but only in relatively recent times the science of light has been developed. Egyptians and Mesopotamians made the first known lenses out of quartz, giving birth to what was later known as optics. On the other hand, geometry is a branch of mathematics that was born from practical studies concerning lengths, areas and volumes in the early cultures, although it was not put into axiomatic form until the 3rd century BC. In this work, we will discuss the connection between these two timeless topics and show some new things in old things". There has been several works in this direction, but taking into account the didactic approach of the Enrico Fermi Summer School, we would like to address the subject and our audience in a new light.

  17. Hofstadter's Butterfly in Quantum Geometry

    CERN Document Server

    Hatsuda, Yasuyuki; Tachikawa, Yuji

    2016-01-01

    We point out that the recent conjectural solution to the spectral problem for the Hamiltonian $H=e^{x}+e^{-x}+e^{p}+e^{-p}$ in terms of the refined topological invariants of a local Calabi-Yau geometry has an intimate relation with two-dimensional non-interacting electrons moving in a periodic potential under a uniform magnetic field. In particular, we find that the quantum A-period, determining the relation between the energy eigenvalue and the Kahler modulus of the Calabi-Yau, can be found explicitly when the quantum parameter $q=e^{i\\hbar}$ is a root of unity, that its branch cuts are given by Hofstadter's butterfly, and that its imaginary part counts the number of states of the Hofstadter Hamiltonian. The modular double operation, exchanging $\\hbar$ and $4\\pi^2/\\hbar$, plays an important role.

  18. Hopf algebras in noncommutative geometry

    CERN Document Server

    Varilly, J C

    2001-01-01

    We give an introductory survey to the use of Hopf algebras in several problems of noncommutative geometry. The main example, the Hopf algebra of rooted trees, is a graded, connected Hopf algebra arising from a universal construction. We show its relation to the algebra of transverse differential operators introduced by Connes and Moscovici in order to compute a local index formula in cyclic cohomology, and to the several Hopf algebras defined by Connes and Kreimer to simplify the combinatorics of perturbative renormalization. We explain how characteristic classes for a Hopf module algebra can be obtained from the cyclic cohomology of the Hopf algebra which acts on it. Finally, we discuss the theory of noncommutative spherical manifolds and show how they arise as homogeneous spaces of certain compact quantum groups.

  19. The Distance Geometry of Music

    CERN Document Server

    Demaine, Erik D; Meijer, Henk; Rappaport, David; Taslakian, Perouz; Toussaint, Godfried T; Winograd, Terry; Wood, David R

    2007-01-01

    We demonstrate relationships between the classic Euclidean algorithm and many other fields of study, particularly in the context of music and distance geometry. Specifically, we show how the structure of the Euclidean algorithm defines a family of rhythms which encompass over forty timelines (\\emph{ostinatos}) from traditional world music. We prove that these \\emph{Euclidean rhythms} have the mathematical property that their onset patterns are distributed as evenly as possible: they maximize the sum of the Euclidean distances between all pairs of onsets, viewing onsets as points on a circle. Indeed, Euclidean rhythms are the unique rhythms that maximize this notion of \\emph{evenness}. We also show that essentially all Euclidean rhythms are \\emph{deep}: each distinct distance between onsets occurs with a unique multiplicity, and these multiplicies form an interval $1,2,...,k-1$. Finally, we characterize all deep rhythms, showing that they form a subclass of generated rhythms, which in turn proves a useful prop...

  20. Walking droplets in confined geometries

    Science.gov (United States)

    Filoux, Boris; Mathieu, Olivier; Vandewalle, Nicolas

    2014-11-01

    When gently placing a droplet onto a vertically vibrated bath, coalescence may be avoided: the drop bounces permanently. Upon increasing forcing acceleration, a drop interacts with the wave it generates, and becomes a ``walker'' with a well defined velocity. In this work, we investigate the confinement of a walker in a mono-dimensional geometry. The system consists of linear submarine channels used as waveguides for a walker. By studying the dynamics of walkers in those channels, we discover some 1D-2D transition. We also propose a model based on an analogy with ``Quantum Wires.'' Finally, we consider the situation of a walker in a circular submarine channel, and examine the behavior of several walking droplets in this system. We show the quantization of the drop distances, and correlate it to their bouncing modes.

  1. Applied geometry and discrete mathematics

    CERN Document Server

    Sturm; Gritzmann, Peter; Sturmfels, Bernd

    1991-01-01

    This volume, published jointly with the Association for Computing Machinery, comprises a collection of research articles celebrating the occasion of Victor Klee's sixty-fifth birthday in September 1990. During his long career, Klee has made contributions to a wide variety of areas, such as discrete and computational geometry, convexity, combinatorics, graph theory, functional analysis, mathematical programming and optimization, and theoretical computer science. In addition, Klee made important contributions to mathematics education, mathematical methods in economics and the decision sciences, applications of discrete mathematics in the biological and social sciences, and the transfer of knowledge from applied mathematics to industry. In honor of Klee's achievements, this volume presents more than forty papers on topics related to Klee's research. While the majority of the papers are research articles, a number of survey articles are also included. Mirroring the breadth of Klee's mathematical contributions, th...

  2. Amoeboid motion in confined geometry

    CERN Document Server

    Wu, Hao; Hu, Wei-Fan; Farutin, Alexander; Rafaï, Salima; Lai, Ming-Chih; Peyla, Philippe; Misbah, Chaouqi

    2015-01-01

    Cells of the immune system, as well as cancer cells, migrating in confined environment of tissues undergo frequent shape changes (described as amoeboid motion) that enable them to move forward through these porous media without the assistance of adhesion sites. In other words, they perform amoeboid swimming (AS) while using extracellular matrices and cells of tissues as support. We introduce a simple model of AS in a confined geometry solved by means of 2D numerical simulations. We find that confinement promotes AS, unless being so strong that it restricts shape change amplitude. A straight AS trajectory in the channel is found to be unstable, and ample lateral excursions of the swimmer prevail. For weak confinement, these excursions are symmetric, while they become asymmetric at stronger confinement, whereby the swimmer is located closer to one of the two walls. This is a spontaneous symmetry-breaking bifurcation. We find that there exists an optimal confinement for migration. We provide numerical results as...

  3. Integrable systems, geometry, and topology

    CERN Document Server

    Terng, Chuu-Lian

    2006-01-01

    The articles in this volume are based on lectures from a program on integrable systems and differential geometry held at Taiwan's National Center for Theoretical Sciences. As is well-known, for many soliton equations, the solutions have interpretations as differential geometric objects, and thereby techniques of soliton equations have been successfully applied to the study of geometric problems. The article by Burstall gives a beautiful exposition on isothermic surfaces and their relations to integrable systems, and the two articles by Guest give an introduction to quantum cohomology, carry out explicit computations of the quantum cohomology of flag manifolds and Hirzebruch surfaces, and give a survey of Givental's quantum differential equations. The article by Heintze, Liu, and Olmos is on the theory of isoparametric submanifolds in an arbitrary Riemannian manifold, which is related to the n-wave equation when the ambient manifold is Euclidean. Mukai-Hidano and Ohnita present a survey on the moduli space of ...

  4. Some Progress in Conformal Geometry

    Directory of Open Access Journals (Sweden)

    Sun-Yung A. Chang

    2007-12-01

    Full Text Available This is a survey paper of our current research on the theory of partial differential equations in conformal geometry. Our intention is to describe some of our current works in a rather brief and expository fashion. We are not giving a comprehensive survey on the subject and references cited here are not intended to be complete. We introduce a bubble tree structure to study the degeneration of a class of Yamabe metrics on Bach flat manifolds satisfying some global conformal bounds on compact manifolds of dimension 4. As applications, we establish a gap theorem, a finiteness theorem for diffeomorphism type for this class, and diameter bound of the $sigma_2$-metrics in a class of conformal 4-manifolds. For conformally compact Einstein metrics we introduce an eigenfunction compactification. As a consequence we obtain some topological constraints in terms of renormalized volumes.

  5. Hessian geometry and entanglement thermodynamics

    CERN Document Server

    Matsueda, Hiroaki

    2015-01-01

    We reconstruct entanglement thermodynamics by means of Hessian geometry, since this method exactly generalizes thermodynamics into much wider exponential family cases including quantum entanglement. Starting with the correct first law of entanglement thermodynamics, we derive that a proper choice of the Hessian potential leads to both of the entanglement entropy scaling for quantum critical systems and hyperbolic metric (or AdS space with imaginary time). We also derive geometric representation of the entanglement entropy in which the entropy is described as integration of local conserved current of information flowing across an entangling surface. We find that the entangling surface is equivalent to the domain boundary of the Hessian potential. This feature originates in a special property of critical systems in which we can identify the entanglement entropy with the Hessian potential after the second derivative by the canonical parameters, and this identification guarantees violation of extensive nature of ...

  6. Geometry of discrete quantum computing

    Science.gov (United States)

    Hanson, Andrew J.; Ortiz, Gerardo; Sabry, Amr; Tai, Yu-Tsung

    2013-05-01

    Conventional quantum computing entails a geometry based on the description of an n-qubit state using 2n infinite precision complex numbers denoting a vector in a Hilbert space. Such numbers are in general uncomputable using any real-world resources, and, if we have the idea of physical law as some kind of computational algorithm of the universe, we would be compelled to alter our descriptions of physics to be consistent with computable numbers. Our purpose here is to examine the geometric implications of using finite fields Fp and finite complexified fields \\mathbf {F}_{p^2} (based on primes p congruent to 3 (mod4)) as the basis for computations in a theory of discrete quantum computing, which would therefore become a computable theory. Because the states of a discrete n-qubit system are in principle enumerable, we are able to determine the proportions of entangled and unentangled states. In particular, we extend the Hopf fibration that defines the irreducible state space of conventional continuous n-qubit theories (which is the complex projective space \\mathbf {CP}^{2^{n}-1}) to an analogous discrete geometry in which the Hopf circle for any n is found to be a discrete set of p + 1 points. The tally of unit-length n-qubit states is given, and reduced via the generalized Hopf fibration to \\mathbf {DCP}^{2^{n}-1}, the discrete analogue of the complex projective space, which has p^{2^{n}-1} (p-1)\\,\\prod _{k=1}^{n-1} ( p^{2^{k}}+1) irreducible states. Using a measure of entanglement, the purity, we explore the entanglement features of discrete quantum states and find that the n-qubit states based on the complexified field \\mathbf {F}_{p^2} have pn(p - 1)n unentangled states (the product of the tally for a single qubit) with purity 1, and they have pn + 1(p - 1)(p + 1)n - 1 maximally entangled states with purity zero.

  7. Symplectic and Poisson Geometry in Interaction with Analysis, Algebra and Topology & Symplectic Geometry, Noncommutative Geometry and Physics

    CERN Document Server

    Eliashberg, Yakov; Maeda, Yoshiaki; Symplectic, Poisson, and Noncommutative geometry

    2014-01-01

    Symplectic geometry originated in physics, but it has flourished as an independent subject in mathematics, together with its offspring, symplectic topology. Symplectic methods have even been applied back to mathematical physics. Noncommutative geometry has developed an alternative mathematical quantization scheme based on a geometric approach to operator algebras. Deformation quantization, a blend of symplectic methods and noncommutative geometry, approaches quantum mechanics from a more algebraic viewpoint, as it addresses quantization as a deformation of Poisson structures. This volume contains seven chapters based on lectures given by invited speakers at two May 2010 workshops held at the Mathematical Sciences Research Institute: Symplectic and Poisson Geometry in Interaction with Analysis, Algebra and Topology (honoring Alan Weinstein, one of the key figures in the field) and Symplectic Geometry, Noncommutative Geometry and Physics. The chapters include presentations of previously unpublished results and ...

  8. Convection in Slab and Spheroidal Geometries

    Science.gov (United States)

    Porter, David H.; Woodward, Paul R.; Jacobs, Michael L.

    2000-01-01

    Three-dimensional numerical simulations of compressible turbulent thermally driven convection, in both slab and spheroidal geometries, are reviewed and analyzed in terms of velocity spectra and mixing-length theory. The same ideal gas model is used in both geometries, and resulting flows are compared. The piecewise-parabolic method (PPM), with either thermal conductivity or photospheric boundary conditions, is used to solve the fluid equations of motion. Fluid motions in both geometries exhibit a Kolmogorov-like k(sup -5/3) range in their velocity spectra. The longest wavelength modes are energetically dominant in both geometries, typically leading to one convection cell dominating the flow. In spheroidal geometry, a dipolar flow dominates the largest scale convective motions. Downflows are intensely turbulent and up drafts are relatively laminar in both geometries. In slab geometry, correlations between temperature and velocity fluctuations, which lead to the enthalpy flux, are fairly independent of depth. In spheroidal geometry this same correlation increases linearly with radius over the inner 70 percent by radius, in which the local pressure scale heights are a sizable fraction of the radius. The effects from the impenetrable boundary conditions in the slab geometry models are confused with the effects from non-local convection. In spheroidal geometry nonlocal effects, due to coherent plumes, are seen as far as several pressure scale heights from the lower boundary and are clearly distinguishable from boundary effects.

  9. Convection in Slab and Spheroidal Geometries

    Science.gov (United States)

    Porter, David H.; Woodward, Paul R.; Jacobs, Michael L.

    2000-01-01

    Three-dimensional numerical simulations of compressible turbulent thermally driven convection, in both slab and spheroidal geometries, are reviewed and analyzed in terms of velocity spectra and mixing-length theory. The same ideal gas model is used in both geometries, and resulting flows are compared. The piecewise-parabolic method (PPM), with either thermal conductivity or photospheric boundary conditions, is used to solve the fluid equations of motion. Fluid motions in both geometries exhibit a Kolmogorov-like k(sup -5/3) range in their velocity spectra. The longest wavelength modes are energetically dominant in both geometries, typically leading to one convection cell dominating the flow. In spheroidal geometry, a dipolar flow dominates the largest scale convective motions. Downflows are intensely turbulent and up drafts are relatively laminar in both geometries. In slab geometry, correlations between temperature and velocity fluctuations, which lead to the enthalpy flux, are fairly independent of depth. In spheroidal geometry this same correlation increases linearly with radius over the inner 70 percent by radius, in which the local pressure scale heights are a sizable fraction of the radius. The effects from the impenetrable boundary conditions in the slab geometry models are confused with the effects from non-local convection. In spheroidal geometry nonlocal effects, due to coherent plumes, are seen as far as several pressure scale heights from the lower boundary and are clearly distinguishable from boundary effects.

  10. Second International workshop Geometry and Symbolic Computation

    CERN Document Server

    Walczak, Paweł; Geometry and its Applications

    2014-01-01

    This volume has been divided into two parts: Geometry and Applications. The geometry portion of the book relates primarily to geometric flows, laminations, integral formulae, geometry of vector fields on Lie groups, and osculation; the articles in the applications portion concern some particular problems of the theory of dynamical systems, including mathematical problems of liquid flows and a study of cycles for non-dynamical systems. This Work is based on the second international workshop entitled "Geometry and Symbolic Computations," held on May 15-18, 2013 at the University of Haifa and is dedicated to modeling (using symbolic calculations) in differential geometry and its applications in fields such as computer science, tomography, and mechanics. It is intended to create a forum for students and researchers in pure and applied geometry to promote discussion of modern state-of-the-art in geometric modeling using symbolic programs such as Maple™ and Mathematica®, as well as presentation of new results. ...

  11. A Relationship between Geometry and Algebra

    CERN Document Server

    Bejarano, Jose Ricardo Arteaga

    2011-01-01

    The three key documents for study geometry are: 1) "The Elements" of Euclid, 2) the lecture by B. Riemann at G\\"ottingen in 1854 entitled "\\"Uber die Hypothesen welche der Geometrie zu Grunde liegen" (On the hypotheses which underlie geometry) and 3) the "Erlangen Program", a document written by F. Klein (1872) on his income as professor at the Faculty of Philosophy and the Senate of the Erlangen University. The latter document F. Klein introduces the concept of group as a tool to study geometry. The concept of a group of transformations of space was known at the time. The purpose of this informative paper is to show a relationship between geometry and algebra through an example, the projective plane. Erlangen program until today continues being a guideline of how to study geometry.

  12. Riemannian geometry of fluctuation theory: An introduction

    Science.gov (United States)

    Velazquez, Luisberis

    2016-05-01

    Fluctuation geometry was recently proposed as a counterpart approach of Riemannian geometry of inference theory (information geometry), which describes the geometric features of the statistical manifold M of random events that are described by a family of continuous distributions dpξ(x|θ). This theory states a connection among geometry notions and statistical properties: separation distance as a measure of relative probabilities, curvature as a measure about the existence of irreducible statistical correlations, among others. In statistical mechanics, fluctuation geometry arises as the mathematical apparatus of a Riemannian extension of Einstein fluctuation theory, which is also closely related to Ruppeiner geometry of thermodynamics. Moreover, the curvature tensor allows to express some asymptotic formulae that account for the system fluctuating behavior beyond the gaussian approximation, while curvature scalar appears as a second-order correction of Legendre transformation between thermodynamic potentials.

  13. The influence of the nanostructure geometry on the thermoelectric properties

    Science.gov (United States)

    AL-Badry, Lafy F.

    2016-09-01

    We discuss the influence of nanostructure geometry on the thermoelectric properties in quantum ring consists of one QD in each arm, each QD connects with side QD. The calculations are based on the time-dependent Hamiltonian model, the steady state is considered to obtain an analytical expression for the transmission probability as a function of system energies. We employed the transmission probability to calculate the thermoelectric properties. We investigate thermoelectric properties through three configurations of this nanostructure. Figure of merit enhanced in configuration (II) when side QD connected to upper arm of quantum ring. The magnetic flux threads quantum ring. The effect of magnetic flux on the thermoelectric properties is examined.

  14. Recent developments and some open problems in Finsler geometry

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Finsler geometry is just Riemannian geometry without the quadratic restriction. Recent studies on Finsler geometry have taken on a new look. In this article, we will briefly discuss recent developments and some open problems in Finsler geometry.

  15. Good Codes From Generalised Algebraic Geometry Codes

    CERN Document Server

    Jibril, Mubarak; Ahmed, Mohammed Zaki; Tjhai, Cen

    2010-01-01

    Algebraic geometry codes or Goppa codes are defined with places of degree one. In constructing generalised algebraic geometry codes places of higher degree are used. In this paper we present 41 new codes over GF(16) which improve on the best known codes of the same length and rate. The construction method uses places of small degree with a technique originally published over 10 years ago for the construction of generalised algebraic geometry codes.

  16. Classical geometry Euclidean, transformational, inversive, and projective

    CERN Document Server

    Leonard, I E; Liu, A C F; Tokarsky, G W

    2014-01-01

    Features the classical themes of geometry with plentiful applications in mathematics, education, engineering, and science Accessible and reader-friendly, Classical Geometry: Euclidean, Transformational, Inversive, and Projective introduces readers to a valuable discipline that is crucial to understanding bothspatial relationships and logical reasoning. Focusing on the development of geometric intuitionwhile avoiding the axiomatic method, a problem solving approach is encouraged throughout. The book is strategically divided into three sections: Part One focuses on Euclidean geometry, which p

  17. Generalized Kahler Geometry from supersymmetric sigma models

    CERN Document Server

    Bredthauer, A; Persson, J; Zabzine, M; Bredthauer, Andreas; Lindstrom, Ulf; Persson, Jonas; Zabzine, Maxim

    2006-01-01

    We give a physical derivation of generalized Kahler geometry. Starting from a supersymmetric nonlinear sigma model, we rederive and explain the results of Gualtieri regarding the equivalence between generalized Kahler geometry and the bi-hermitean geometry of Gates-Hull-Rocek. When cast in the language of supersymmetric sigma models, this relation maps precisely to that between the Lagrangian and the Hamiltonian formalisms. We also discuss topological twist in this context.

  18. A vector space approach to geometry

    CERN Document Server

    Hausner, Melvin

    2010-01-01

    The effects of geometry and linear algebra on each other receive close attention in this examination of geometry's correlation with other branches of math and science. In-depth discussions include a review of systematic geometric motivations in vector space theory and matrix theory; the use of the center of mass in geometry, with an introduction to barycentric coordinates; axiomatic development of determinants in a chapter dealing with area and volume; and a careful consideration of the particle problem. 1965 edition.

  19. Geometry of solar coronal rays

    Science.gov (United States)

    Filippov, B. P.; Martsenyuk, O. V.; Platov, Yu. V.; Den, O. E.

    2016-02-01

    Coronal helmet streamers are the most prominent large-scale elements of the solar corona observed in white light during total solar eclipses. The base of the streamer is an arcade of loops located above a global polarity inversion line. At an altitude of 1-2 solar radii above the limb, the apices of the arches sharpen, forming cusp structures, above which narrow coronal rays are observed. Lyot coronagraphs, especially those on-board spacecrafts flying beyond the Earth's atmosphere, enable us to observe the corona continuously and at large distances. At distances of several solar radii, the streamers take the form of fairly narrow spokes that diverge radially from the Sun. This radial direction displays a continuous expansion of the corona into the surrounding space, and the formation of the solar wind. However, the solar magnetic field and solar rotation complicate the situation. The rotation curves radial streams into spiral ones, similar to water streams flowing from rotating tubes. The influence of the magnetic field is more complex and multifarious. A thorough study of coronal ray geometries shows that rays are frequently not radial and not straight. Coronal streamers frequently display a curvature whose direction in the meridional plane depends on the phase of the solar cycle. It is evident that this curvature is related to the geometry of the global solar magnetic field, which depends on the cycle phase. Equatorward deviations of coronal streamers at solar minima and poleward deviations at solar maxima can be interpreted as the effects of changes in the general topology of the global solar magnetic field. There are sporadic temporal changes in the coronal rays shape caused by remote coronal mass ejections (CMEs) propagating through the corona. This is also a manifestation of the influence of the magnetic field on plasma flows. The motion of a large-scale flux rope associated with a CME away from the Sun creates changes in the structure of surrounding field

  20. Disformal transformation in Newton-Cartan geometry

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Peng [Zhejiang Chinese Medical University, Department of Information, Hangzhou (China); Sun Yat-Sen University, School of Physics and Astronomy, Guangzhou (China); Yuan, Fang-Fang [Nankai University, School of Physics, Tianjin (China)

    2016-08-15

    Newton-Cartan geometry has played a central role in recent discussions of the non-relativistic holography and condensed matter systems. Although the conformal transformation in non-relativistic holography can easily be rephrased in terms of Newton-Cartan geometry, we show that it requires a nontrivial procedure to arrive at the consistent form of anisotropic disformal transformation in this geometry. Furthermore, as an application of the newly obtained transformation, we use it to induce a geometric structure which may be seen as a particular non-relativistic version of the Weyl integrable geometry. (orig.)

  1. Introduction to non-Euclidean geometry

    CERN Document Server

    Wolfe, Harold E

    2012-01-01

    One of the first college-level texts for elementary courses in non-Euclidean geometry, this concise, readable volume is geared toward students familiar with calculus. A full treatment of the historical background explores the centuries-long efforts to prove Euclid's parallel postulate and their triumphant conclusion. Numerous original exercises form an integral part of the book.Topics include hyperbolic plane geometry and hyperbolic plane trigonometry, applications of calculus to the solutions of some problems in hyperbolic geometry, elliptic plane geometry and trigonometry, and the consistenc

  2. (AJST) EFFECTS OF PARTICLE GEOMETRY AND CHEMICAL ...

    African Journals Online (AJOL)

    Department of Agricultural & Environmental Engineering, ... Effects of Particle Geometry and Chemical Accelerator on Strength ..... American Society of Agricultural Engineers, ASAE EP ... the Engineering Materials Development Institute,.

  3. Combinatorics, geometry, and mathematical physics

    Energy Technology Data Exchange (ETDEWEB)

    Chen, W.Y.C.; Louck, J.D.

    1998-11-01

    This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Combinatorics and geometry have been among the most active areas of mathematics over the past few years because of newly discovered inter-relations between them and their potential for applications. In this project, the authors set out to identify problems in physics, chemistry, and biology where these methods could impact significantly. In particular, the experience suggested that the areas of unitary symmetry and discrete dynamical systems could be brought more strongly under the purview of combinatorial methods. Unitary symmetry deals with the detailed description of the quantum mechanics of many-particle systems, and discrete dynamical systems with chaotic systems. The depth and complexity of the mathematics in these physical areas of research suggested that not only could significant advances be made in these areas, but also that here would be a fertile feedback of concept and structure to enrich combinatorics itself by setting new directions. During the three years of this project, the goals have been realized beyond expectation, and in this report the authors set forth these advancements and justify their optimism.

  4. Eye movements and information geometry.

    Science.gov (United States)

    Lenz, Reiner

    2016-08-01

    The human visual system uses eye movements to gather visual information. They act as visual scanning processes and can roughly be divided into two different types: small movements around fixation points and larger movements between fixation points. The processes are often modeled as random walks, and recent models based on heavy tail distributions, also known as Levý flights, have been used in these investigations. In contrast to these approaches we do not model the stochastic processes, but we will show that the step lengths of the movements between fixation points follow generalized Pareto distributions (GPDs). We will use general arguments from the theory of extreme value statistics to motivate the usage of the GPD and show empirically that the GPDs provide good fits for measured eye tracking data. In the framework of information geometry the GPDs with a common threshold form a two-dimensional Riemann manifold with the Fisher information matrix as a metric. We compute the Fisher information matrix for the GPDs and introduce a feature vector describing a GPD by its parameters and different geometrical properties of its Fisher information matrix. In our statistical analysis we use eye tracker measurements in a database with 15 observers viewing 1003 images under free-viewing conditions. We use Matlab functions with their standard parameter settings and show that a naive Bayes classifier using the eigenvalues of the Fisher information matrix provides a high classification rate identifying the 15 observers in the database.

  5. Latent geometry of bipartite networks

    Science.gov (United States)

    Kitsak, Maksim; Papadopoulos, Fragkiskos; Krioukov, Dmitri

    2017-03-01

    Despite the abundance of bipartite networked systems, their organizing principles are less studied compared to unipartite networks. Bipartite networks are often analyzed after projecting them onto one of the two sets of nodes. As a result of the projection, nodes of the same set are linked together if they have at least one neighbor in common in the bipartite network. Even though these projections allow one to study bipartite networks using tools developed for unipartite networks, one-mode projections lead to significant loss of information and artificial inflation of the projected network with fully connected subgraphs. Here we pursue a different approach for analyzing bipartite systems that is based on the observation that such systems have a latent metric structure: network nodes are points in a latent metric space, while connections are more likely to form between nodes separated by shorter distances. This approach has been developed for unipartite networks, and relatively little is known about its applicability to bipartite systems. Here, we fully analyze a simple latent-geometric model of bipartite networks and show that this model explains the peculiar structural properties of many real bipartite systems, including the distributions of common neighbors and bipartite clustering. We also analyze the geometric information loss in one-mode projections in this model and propose an efficient method to infer the latent pairwise distances between nodes. Uncovering the latent geometry underlying real bipartite networks can find applications in diverse domains, ranging from constructing efficient recommender systems to understanding cell metabolism.

  6. The Geometry of Bourges Cathedral

    Directory of Open Access Journals (Sweden)

    Robert Bork

    2014-09-01

    Full Text Available This article presents a geometrical analysis of Bourges Cathedral, based on the application of computer-aided design (CAD techniques to the results of a recent and highly precise laser survey. This analysis reveals that the cathedral's original designer developed a tightly interlocking and strikingly unified design, in which the five-fold subdivision of the chevet ground plan set proportions that would be vertically extruded into an elevation that can be inscribed both within a square and within a series of progessively smaller equilaterial triangles. These results contribute to an ongoing debate about the use of ‘ad quadratum’ and ‘ad triangulum’ geometries in Gothic architecture, and they provide new evidence for the geometrical coherence of Gothic cathedral design. In methodological terms, meanwhile, this discussion demonstrates the potential of CAD-based geometrical analysis for the study of precisely surveyed medieval buildings. The sequence of images being analysed can be viewed as supplementary material at: http://dx.doi.org/10.5334/ah.bz.s1

  7. Fractal Geometry and Stochastics V

    CERN Document Server

    Falconer, Kenneth; Zähle, Martina

    2015-01-01

    This book brings together leading contributions from the fifth conference on Fractal Geometry and Stochastics held in Tabarz, Germany, in March 2014. The book is divided into five sections covering different facets of this fast developing area: geometric measure theory, self-similar fractals and recurrent structures, analysis and algebra on fractals, multifractal theory, and random constructions. There are state-of-the-art surveys as well as papers highlighting more specific recent advances. The authors are world-experts who present their topics comprehensibly and attractively. The book provides an accessible gateway to the subject for newcomers as well as a reference for recent developments for specialists. Authors include: Krzysztof Barański, Julien Barral, Kenneth Falconer, De-Jun Feng, Peter J. Grabner, Rostislav Grigorchuk, Michael Hinz, Stéphane Jaffard, Maarit Järvenpää, Antti Käenmäki, Marc Kesseböhmer, Michel Lapidus, Klaus Mecke, Mark Pollicott,  Michał Rams, Pablo Shmerkin, and András Te...

  8. The geometry of population genetics

    CERN Document Server

    Akin, Ethan

    1979-01-01

    The differential equations which model the action of selection and recombination are nonlinear equations which are impossible to It is even difficult to describe in general the solve explicitly. Recently, Shahshahani began using qualitative behavior of solutions. differential geometry to study these equations [28]. with this mono­ graph I hope to show that his ideas illuminate many aspects of pop­ ulation genetics. Among these are his proof and clarification of Fisher's Fundamental Theorem of Natural Selection and Kimura's Maximum Principle and also the effect of recombination on entropy. We also discover the relationship between two classic measures of 2 genetic distance: the x measure and the arc-cosine measure. There are two large applications. The first is a precise definition of the biological concept of degree of epistasis which applies to general (i.e. frequency dependent) forms of selection. The second is the unexpected appearance of cycling. We show that cycles can occur in the two-locus-two-allele...

  9. Self-biased large magnetoelectric coupling in co-sintered Bi{sub 0.5}Na{sub 0.5}TiO{sub 3} based piezoelectric and CoFe{sub 2}O{sub 4} based magnetostrictive bilayered composite

    Energy Technology Data Exchange (ETDEWEB)

    Kumari, Mukesh; Singh, Amrita; Chatterjee, Ratnamala, E-mail: rmala@physics.iitd.ac.in, E-mail: ratnamalac@gmail.com [Magnetics and Advanced Ceramics Laboratory, Physics Department, Indian Institute of Technology, Delhi 110016 (India); Gupta, Arti [Physics and Astrophysics Department, Delhi University, Delhi 110007 (India); Prakash, Chandra [Solid State Physics Laboratory Timarpur, Delhi 110054 (India)

    2014-12-28

    In this work, magnetoelectric properties of a co-sintered bilayered composite of non-lead based piezoelectric 0.97(Bi{sub 0.5}Na{sub 0.5}TiO{sub 3})–0.03(K{sub 0.47}Na{sub 0.47}Li{sub 0.06}Nb{sub 0.74}Sb{sub 0.06}Ta{sub 0.2}O{sub 3}) and magnetostrictive Co{sub 0.6}Zn{sub 0.4}Fe{sub 1.7}Mn{sub 0.3}O{sub 4} are presented. Similar optimal sintering conditions of the individual components lead to a very clean interface as evidenced in the scanning electron microscopy, angle dispersive X-ray diffraction, and energy-dispersive X-ray (EDX) results. Clean interface results in strong intimate mechanical coupling between both components and causes a maximum transfer of induced strain, leading to a large magnetoelectric coupling ∼142 mV/cm·Oe measured in longitudinally magnetized-transversely polarized configuration (L-T mode). Remnant polarization ∼32 μC/cm{sup 2}, remnant magnetization ∼0.50 emu/g, and sufficiently high self biased magnetoelectricity ∼135 mV/cm Oe (L-T mode) were observed for this composite.

  10. Quantum groups: Geometry and applications

    Energy Technology Data Exchange (ETDEWEB)

    Chu, C.S. [Lawrence Berkeley Lab., CA (United States). Theoretical Physics Group

    1996-05-13

    The main theme of this thesis is a study of the geometry of quantum groups and quantum spaces, with the hope that they will be useful for the construction of quantum field theory with quantum group symmetry. The main tool used is the Faddeev-Reshetikhin-Takhtajan description of quantum groups. A few content-rich examples of quantum complex spaces with quantum group symmetry are treated in details. In chapter 1, the author reviews some of the basic concepts and notions for Hopf algebras and other background materials. In chapter 2, he studies the vector fields of quantum groups. A compact realization of these vector fields as pseudodifferential operators acting on the linear quantum spaces is given. In chapter 3, he describes the quantum sphere as a complex quantum manifold by means of a quantum stereographic projection. A covariant calculus is introduced. An interesting property of this calculus is the existence of a one-form realization of the exterior differential operator. The concept of a braided comodule is introduced and a braided algebra of quantum spheres is constructed. In chapter 4, the author considers the more general higher dimensional quantum complex projective spaces and the quantum Grassman manifolds. Differential calculus, integration and braiding can be introduced as in the one dimensional case. Finally, in chapter 5, he studies the framework of quantum principal bundle and construct the q-deformed Dirac monopole as a quantum principal bundle with a quantum sphere as the base and a U(1) with non-commutative calculus as the fiber. The first Chern class can be introduced and integrated to give the monopole charge.

  11. Algebra-Geometry of Piecewise Algebraic Varieties

    Institute of Scientific and Technical Information of China (English)

    Chun Gang ZHU; Ren Hong WANG

    2012-01-01

    Algebraic variety is the most important subject in classical algebraic geometry.As the zero set of multivariate splines,the piecewise algebraic variety is a kind generalization of the classical algebraic variety.This paper studies the correspondence between spline ideals and piecewise algebraic varieties based on the knowledge of algebraic geometry and multivariate splines.

  12. Description of SSG Geometry - phase 1

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Kofoed, Jens Peter

    The purpose of the study is to define the optimized geometry for the SSG in Svaheia, Norway and to provide the responsible for the turbines with useful information to their work.......The purpose of the study is to define the optimized geometry for the SSG in Svaheia, Norway and to provide the responsible for the turbines with useful information to their work....

  13. Trigonometry and Analytic Geometry: Curriculum Guide.

    Science.gov (United States)

    Harlandale Independent School District, San Antonio, TX. Career Education Center.

    The guide (one-quarter trigonometry course; two-quarter analytic geometry course) provides both subject matter and career preparation assistance for advanced mathematics teachers. It is arranged in vertical columns relating curriculum concepts in trigonometry and analytic geometry to curriculum performance objectives, career concepts and teaching…

  14. Visual and Analytic Strategies in Geometry

    Science.gov (United States)

    Kospentaris, George; Vosniadou, Stella; Kazic, Smaragda; Thanou, Emilian

    2016-01-01

    We argue that there is an increasing reliance on analytic strategies compared to visuospatial strategies, which is related to geometry expertise and not on individual differences in cognitive style. A Visual/Analytic Strategy Test (VAST) was developed to investigate the use of visuo-spatial and analytic strategies in geometry in 30 mathematics…

  15. Computing Bisectors in a Dynamic Geometry Environment

    Science.gov (United States)

    Botana, Francisco

    2013-01-01

    In this note, an approach combining dynamic geometry and automated deduction techniques is used to study the bisectors between points and curves. Usual teacher constructions for bisectors are discussed, showing that inherent limitations in dynamic geometry software impede their thorough study. We show that the interactive sketching of bisectors…

  16. Improving African American Achievement in Geometry Honors

    Science.gov (United States)

    Mims, Adrian B.

    2010-01-01

    This case study evaluated the significance of implementing an enrichment mathematics course during the summer to rising African American ninth graders entitled, "Geometry Honors Preview." In the past, 60 to 70 percent of African American students in this school district had withdrawn from Geometry Honors by the second academic quarter. This study…

  17. Geometry of all supersymmetric type I backgrounds

    NARCIS (Netherlands)

    Gran, Ulf; Papadopoulos, George; Sloane, Peter; Roest, Diederik

    2007-01-01

    We find the geometry of all supersymmetric type I backgrounds by solving the gravitino and dilatino Killing spinor equations, using the spinorial geometry technique, in all cases. The solutions of the gravitino Killing spinor equation are characterized by their isotropy group in Spin(9, 1), while th

  18. A Multivariate Model of Achievement in Geometry

    Science.gov (United States)

    Bailey, MarLynn; Taasoobshirazi, Gita; Carr, Martha

    2014-01-01

    Previous studies have shown that several key variables influence student achievement in geometry, but no research has been conducted to determine how these variables interact. A model of achievement in geometry was tested on a sample of 102 high school students. Structural equation modeling was used to test hypothesized relationships among…

  19. Making Euclidean Geometry Compulsory: Are We Prepared?

    Science.gov (United States)

    Van Putten, Sonja; Howie, Sarah; Stols, Gerrit

    2010-01-01

    This study investigated the attitude towards, as well as the level of understanding of Euclidean geometry in pre-service mathematics education (PME) students. In order to do so, a case study was undertaken within which a one group pre-post-test procedure was conducted around a geometry module, and a representative group of students was interviewed…

  20. Symposium on Differential Geometry and Differential Equations

    CERN Document Server

    Berger, Marcel; Bryant, Robert

    1987-01-01

    The DD6 Symposium was, like its predecessors DD1 to DD5 both a research symposium and a summer seminar and concentrated on differential geometry. This volume contains a selection of the invited papers and some additional contributions. They cover recent advances and principal trends in current research in differential geometry.

  1. Two-spinor geometry and gauge freedom

    CERN Document Server

    Canarutto, Daniel

    2014-01-01

    Gauge freedom in quantum particle physics is shown to arise in a natural way from the geometry of two-spinors (Weyl spinors). Various related mathematical notions are reviewed, and a special ansatz of the kind "the system defines the geometry" is discussed in connection with the stated results.

  2. Recent Advances in Computational Conformal Geometry

    OpenAIRE

    Gu, Xianfeng David; Luo, Feng; Yau, Shing-Tung

    2009-01-01

    Computational conformal geometry focuses on developing the computational methodologies on discrete surfaces to discover conformal geometric invariants. In this work, we briefly summarize the recent developments for methods and related applications in computational conformal geometry. There are two major approaches, holomorphic differentials and curvature flow. Holomorphic differential method is a linear method, which is more efficient and robust to triangulations with lower qua...

  3. Poisson Geometry from a Dirac perspective

    OpenAIRE

    Meinrenken, Eckhard

    2016-01-01

    We present proofs of classical results in Poisson geometry using techniques from Dirac geometry. This article is based on mini-courses at the Poisson summer school in Geneva, June 2016, and at the workshop "Quantum Groups and Gravity" at the University of Waterloo, April 2016.

  4. Information Geometry and Evolutionary Game Theory

    CERN Document Server

    Harper, Marc

    2009-01-01

    The Shahshahani geometry of evolutionary game theory is realized as the information geometry of the simplex, deriving from the Fisher information metric of the manifold of categorical probability distributions. Some essential concepts in evolutionary game theory are realized information-theoretically. Results are extended to the Lotka-Volterra equation and to multiple population systems.

  5. An approach for management of geometry data

    Science.gov (United States)

    Dube, R. P.; Herron, G. J.; Schweitzer, J. E.; Warkentine, E. R.

    1980-01-01

    The strategies for managing Integrated Programs for Aerospace Design (IPAD) computer-based geometry are described. The computer model of geometry is the basis for communication, manipulation, and analysis of shape information. IPAD's data base system makes this information available to all authorized departments in a company. A discussion of the data structures and algorithms required to support geometry in IPIP (IPAD's data base management system) is presented. Through the use of IPIP's data definition language, the structure of the geometry components is defined. The data manipulation language is the vehicle by which a user defines an instance of the geometry. The manipulation language also allows a user to edit, query, and manage the geometry. The selection of canonical forms is a very important part of the IPAD geometry. IPAD has a canonical form for each entity and provides transformations to alternate forms; in particular, IPAD will provide a transformation to the ANSI standard. The DBMS schemas required to support IPAD geometry are explained.

  6. A Multivariate Model of Achievement in Geometry

    Science.gov (United States)

    Bailey, MarLynn; Taasoobshirazi, Gita; Carr, Martha

    2014-01-01

    Previous studies have shown that several key variables influence student achievement in geometry, but no research has been conducted to determine how these variables interact. A model of achievement in geometry was tested on a sample of 102 high school students. Structural equation modeling was used to test hypothesized relationships among…

  7. Diaquabis(benzyloxyacetatocopper(II

    Directory of Open Access Journals (Sweden)

    Xiao-Min Hao

    2008-05-01

    Full Text Available In the title mononuclear complex, [Cu(C9H9O32(H2O2], the CuII ion, located on an inversion center, is hexacoordinated by four O atoms from two benzyloxyacetate ligands [Cu—O = 1.9420 (14 and 2.2922 (14 Å] and two water molecules [Cu—O = 2.0157 (15 Å] in a distorted octahedral geometry. In the crystal structure, intermolecular O—H...O hydrogen bonds link the molecules into layers parallel to the bc plane.

  8. Graphics gems II

    CERN Document Server

    Arvo, James

    1991-01-01

    Graphics Gems II is a collection of articles shared by a diverse group of people that reflect ideas and approaches in graphics programming which can benefit other computer graphics programmers.This volume presents techniques for doing well-known graphics operations faster or easier. The book contains chapters devoted to topics on two-dimensional and three-dimensional geometry and algorithms, image processing, frame buffer techniques, and ray tracing techniques. The radiosity approach, matrix techniques, and numerical and programming techniques are likewise discussed.Graphics artists and comput

  9. Synthesis and spectral studies of Cu(II, Ni(II, Co(II, Mn(II, Zn(II and Cd(II complexes of a new macroacyclic ligand N,N’-bis(2-benzothiazolyl-2,6-pyridinedicarboxamide

    Directory of Open Access Journals (Sweden)

    KALAGOUDA B. GUDASI

    2006-05-01

    Full Text Available A new macroacyclic amide ligand N,N’-bis(2-benzothiazolyl-2,6-pyridinedicarboxamide (BPD, formed by the condensation of 2,6-pyridinedicarbonyldichloride with 2-aminobenzothiazole, and its Cu(II, Ni(II, Co(II, Mn(II, Zn(II and Cd(II complexes were synthesized. Their structures were elucidated on the basis of elemental analyses, conductance measurements, magnetic moments, spectral (IR, NMR, UV-Visible, EPR and FAB and thermal studies. The complexes exhibit an octahedral geometry around the metal center. Conductance data of the complexes suggested them to be 1:1 electrolytes. The pentadentate behavior of the ligand was proposed on the basis of spectral studies. The X-band EPR spectra of the Cu(II and Mn(II complexes in the polycrystalline state at room (300 K and liquid nitrogen temperature (77 K were recorded and their salient features are reported.

  10. FINAL REPORT: GEOMETRY AND ELEMENTARY PARTICLE PHYSICS

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Isadore M.

    2008-03-04

    The effect on mathematics of collaborations between high-energy theoretical physics and modern mathematics has been remarkable. Mirror symmetry has revolutionized enumerative geometry, and Seiberg-Witten invariants have greatly simplified the study of four manifolds. And because of their application to string theory, physicists now need to know cohomology theory, characteristic classes, index theory, K-theory, algebraic geometry, differential geometry, and non-commutative geometry. Much more is coming. We are experiencing a deeper contact between the two sciences, which will stimulate new mathematics essential to the physicists’ quest for the unification of quantum mechanics and relativity. Our grant, supported by the Department of Energy for twelve years, has been instrumental in promoting an effective interaction between geometry and string theory, by supporting the Mathematical Physics seminar, postdoc research, collaborations, graduate students and several research papers.

  11. Applications Of Nonclassical Geometry To String Theory

    CERN Document Server

    Zunger, Y

    2003-01-01

    String theory is built on a foundation of geometry. This thesis examines several applications of geometry beyond the classical Riemannian geometry of curved surfaces. The first part considers the use of extended spaces with internal dimensions to each point (“twistors”) to probe systems with a great deal of symmetry but complicated dynamics. These systems are of critical interest in understanding holographic phenomena in string theory and the origins of entropy. We develop a twistor formulation of coset spaces and use this to write simplified actions for particles and strings on anti-de Sitter space, which are easier to quantize than the ordinary (highly nonlinear) actions. In the second part, we consider two aspects of noncommutative geometry, a generalization of ordinary geometry where points are “fuzzed out” and functions of space become noncommuting operators. We first examine strings with one endpoint on a D-brane in a background magnetic field. (Strings with both ...

  12. Geometry of Cauchy-Riemann submanifolds

    CERN Document Server

    Shahid, Mohammad; Al-Solamy, Falleh

    2016-01-01

    This book gathers contributions by respected experts on the theory of isometric immersions between Riemannian manifolds, and focuses on the geometry of CR structures on submanifolds in Hermitian manifolds. CR structures are a bundle theoretic recast of the tangential Cauchy–Riemann equations in complex analysis involving several complex variables. The book covers a wide range of topics such as Sasakian geometry, Kaehler and locally conformal Kaehler geometry, the tangential CR equations, Lorentzian geometry, holomorphic statistical manifolds, and paraquaternionic CR submanifolds. Intended as a tribute to Professor Aurel Bejancu, who discovered the notion of a CR submanifold of a Hermitian manifold in 1978, the book provides an up-to-date overview of several topics in the geometry of CR submanifolds. Presenting detailed information on the most recent advances in the area, it represents a useful resource for mathematicians and physicists alike.

  13. Transformations of units and world's geometry

    CERN Document Server

    Quirós, I

    2000-01-01

    The issue of the transformations of units is treated, mainly, in a geometrical context. Spacetime singularities are shown to be a consequence of a wrong choice of the geometrical formulation of the laws of gravitation. This result is discussed, in particular, for Friedmann-Robertson-Walker cosmology. It is also shown that Weyl geometry is a consistent framework for the formulation of the gravitational laws since the basic laws on which this geometry rests are invariant under the one-parameter Abelian group of units transformations studied in the paper. Riemann geometry does not fulfill this requirement. Arguments are given that point at Weyl geometry as a geometry implicitly containing the quantum effects of matter. The notion of geometrical relativity is presented. This notion may represent a natural extension of general relativity to include invariance under the group of units transformations.

  14. Discrete quantum geometries and their effective dimension

    CERN Document Server

    Thürigen, Johannes

    2015-01-01

    In several approaches towards a quantum theory of gravity, such as group field theory and loop quantum gravity, quantum states and histories of the geometric degrees of freedom turn out to be based on discrete spacetime. The most pressing issue is then how the smooth geometries of general relativity, expressed in terms of suitable geometric observables, arise from such discrete quantum geometries in some semiclassical and continuum limit. In this thesis I tackle the question of suitable observables focusing on the effective dimension of discrete quantum geometries. For this purpose I give a purely combinatorial description of the discrete structures which these geometries have support on. As a side topic, this allows to present an extension of group field theory to cover the combinatorially larger kinematical state space of loop quantum gravity. Moreover, I introduce a discrete calculus for fields on such fundamentally discrete geometries with a particular focus on the Laplacian. This permits to define the ef...

  15. Visuospatial Working Memory in Intuitive Geometry, and in Academic Achievement in Geometry

    Science.gov (United States)

    Giofre, David; Mammarella, Irene C.; Ronconi, Lucia; Cornoldi, Cesare

    2013-01-01

    A study was conducted on the involvement of visuospatial working memory (VSWM) in intuitive geometry and in school performance in geometry at secondary school. A total of 166 pupils were administered: (1) six VSWM tasks, comprising simple storage and complex span tasks; and (2) the intuitive geometry task devised by Dehaene, Izard, Pica, and…

  16. Drawing Dynamic Geometry Figures Online with Natural Language for Junior High School Geometry

    Science.gov (United States)

    Wong, Wing-Kwong; Yin, Sheng-Kai; Yang, Chang-Zhe

    2012-01-01

    This paper presents a tool for drawing dynamic geometric figures by understanding the texts of geometry problems. With the tool, teachers and students can construct dynamic geometric figures on a web page by inputting a geometry problem in natural language. First we need to build the knowledge base for understanding geometry problems. With the…

  17. Analogy and Dynamic Geometry System Used to Introduce Three-Dimensional Geometry

    Science.gov (United States)

    Mammana, M. F.; Micale, B.; Pennisi, M.

    2012-01-01

    We present a sequence of classroom activities on Euclidean geometry, both plane and space geometry, used to make three dimensional geometry more catchy and simple. The activity consists of a guided research activity that leads the students to discover unexpected properties of two apparently distant geometrical entities, quadrilaterals and…

  18. Geometry-Related Children's Literature Improves the Geometry Achievement and Attitudes of Second-Grade Students

    Science.gov (United States)

    McAndrew, Erica M.; Morris, Wendy L.; Fennell, Francis

    2017-01-01

    Use of mathematics-related literature can engage students' interest and increase their understanding of mathematical concepts. A quasi-experimental study of two second-grade classrooms assessed whether daily inclusion of geometry-related literature in the classroom improved attitudes toward geometry and achievement in geometry. Consistent with the…

  19. Visuospatial Working Memory in Intuitive Geometry, and in Academic Achievement in Geometry

    Science.gov (United States)

    Giofre, David; Mammarella, Irene C.; Ronconi, Lucia; Cornoldi, Cesare

    2013-01-01

    A study was conducted on the involvement of visuospatial working memory (VSWM) in intuitive geometry and in school performance in geometry at secondary school. A total of 166 pupils were administered: (1) six VSWM tasks, comprising simple storage and complex span tasks; and (2) the intuitive geometry task devised by Dehaene, Izard, Pica, and…

  20. Analogy and Dynamic Geometry System Used to Introduce Three-Dimensional Geometry

    Science.gov (United States)

    Mammana, M. F.; Micale, B.; Pennisi, M.

    2012-01-01

    We present a sequence of classroom activities on Euclidean geometry, both plane and space geometry, used to make three dimensional geometry more catchy and simple. The activity consists of a guided research activity that leads the students to discover unexpected properties of two apparently distant geometrical entities, quadrilaterals and…

  1. Geometry-Related Children's Literature Improves the Geometry Achievement and Attitudes of Second-Grade Students

    Science.gov (United States)

    McAndrew, Erica M.; Morris, Wendy L.; Fennell, Francis

    2017-01-01

    Use of mathematics-related literature can engage students' interest and increase their understanding of mathematical concepts. A quasi-experimental study of two second-grade classrooms assessed whether daily inclusion of geometry-related literature in the classroom improved attitudes toward geometry and achievement in geometry. Consistent with the…

  2. Optical techniques for Rydberg physics in lattice geometries : A technical guide

    NARCIS (Netherlands)

    Naber, J.B.; Vos, J.; Rengelink, R.J.; Nusselder, R.J.; Davtyan, D.

    2016-01-01

    We address the technical challenges when performing quantum information experiments with ultracold Rydberg atoms in lattice geometries. We discuss the following key aspects: (i) the coherent manipulation of atomic ground states, (ii) the coherent excitation of Rydberg states, and (iii) spatial addre

  3. basement reservoir geometry and properties

    Science.gov (United States)

    Walter, bastien; Geraud, yves; Diraison, marc

    2017-04-01

    Basement reservoirs are nowadays frequently investigated for deep-seated fluid resources (e.g. geothermal energy, groundwater, hydrocarbons). The term 'basement' generally refers to crystalline and metamorphic formations, where matrix porosity is negligible in fresh basement rocks. Geothermal production of such unconventional reservoirs is controlled by brittle structures and altered rock matrix, resulting of a combination of different tectonic, hydrothermal or weathering phenomena. This work aims to characterize the petro-structural and petrophysical properties of two basement surface analogue case studies in geological extensive setting (the Albert Lake rift in Uganda; the Ifni proximal margin of the South West Morocco Atlantic coast). Different datasets, using field structural study, geophysical acquisition and laboratory petrophysical measurements, were integrated to describe the multi-scale geometry of the porous network of such fractured and weathered basement formations. This study points out the multi-scale distribution of all the features constituting the reservoir, over ten orders of magnitude from the pluri-kilometric scale of the major tectonics structures to the infra-millimetric scale of the secondary micro-porosity of fractured and weathered basements units. Major fault zones, with relatively thick and impermeable fault core structures, control the 'compartmentalization' of the reservoir by dividing it into several structural blocks. The analysis of these fault zones highlights the necessity for the basement reservoirs to be characterized by a highly connected fault and fracture system, where structure intersections represent the main fluid drainage areas between and within the reservoir's structural blocks. The suitable fluid storage areas in these reservoirs correspond to the damage zone of all the fault structures developed during the tectonic evolution of the basement and the weathered units of the basement roof developed during pre

  4. Primes, Geometry and Condensed Matter

    Directory of Open Access Journals (Sweden)

    Al Rabeh R. H.

    2009-07-01

    Full Text Available Fascination with primes dates back to the Greeks and before. Primes are named by some "the elementary particles of arithmetic" as every nonprime integer is made of a unique set of primes. In this article we point to new connections between primes, geometry and physics which show that primes could be called "the elementary particles of physics" too. This study considers the problem of closely packing similar circles/spheres in 2D/3D space. This is in effect a discretization process of space and the allowable number in a pack is found to lead to some unexpected cases of prime configurations which is independent of the size of the constituents. We next suggest that a non-prime can be considered geometrically as a symmetric collection that is separable (factorable into similar parts- six is two threes or three twos for example. A collection that has no such symmetry is a prime. As a result, a physical prime aggregate is more difficult to split symmetrically resulting in an inherent stability. This "number/physical" stability idea applies to bigger collections made from smaller (prime units leading to larger stable prime structures in a limitless scaling up process. The distribution of primes among numbers can be understood better using the packing ideas described here and we further suggest that differing numbers (and values of distinct prime factors making a nonprime collection is an important factor in determining the probability and method of possible and subsequent disintegration. Disintegration is bound by energy conservation and is closely related to symmetry by Noether theorems. Thinking of condensed matter as the packing of identical elements, we examine plots of the masses of chemical elements of the periodic table, and also those of the elementary particles of physics, and show that prime packing rules seem to play a role in the make up of matter. The plots show convincingly that the growth of prime numbers and that of the masses of

  5. Primes, Geometry and Condensed Matter

    Directory of Open Access Journals (Sweden)

    Al Rabeh R. H.

    2009-07-01

    Full Text Available Fascination with primes dates back to the Greeks and before. Primes are named by some “the elementary particles of arithmetic” as every nonprime integer is made of a unique set of primes. In this article we point to new connections between primes, geometry and physics which show that primes could be called “the elementary particles of physics” too. This study considers the problem of closely packing similar circles / spheres in 2D / 3D space. This is in effect a discretization process of space and the allowable num- ber in a pack is found to lead to some unexpected cases of prime configurations which is independent of the size of the constituents. We next suggest that a non-prime can be considered geometrically as a symmetric collection that is separable (factorable into similar parts- six is two threes or three twos for example. A collection that has no such symmetry is a prime. As a result, a physical prime aggregate is more difficult to split symmetrically resulting in an inherent stability. This “number / physical” stability idea applies to bigger collections made from smaller (prime units leading to larger sta- ble prime structures in a limitless scaling up process. The distribution of primes among numbers can be understood better using the packing ideas described here and we further suggest that differing numbers (and values of distinct prime factors making a nonprime collection is an important factor in determining the probability and method of possible and subsequent disintegration. Disintegration is bound by energy conservation and is closely related to symmetry by Noether theorems. Thinking of condensed matter as the packing of identical elements, we examine plots of the masses of chemical elements of the periodic table, and also those of the elementary particles of physics, and show that prime packing rules seem to play a role in the make up of matter. The plots show con- vincingly that the growth of prime numbers and that

  6. Modeling of Internal State and Performance of an Ironmaking Blast Furnace: Slot vs Sector Geometries

    Science.gov (United States)

    Shen, Yansong; Guo, Baoyu; Chew, Sheng; Austin, Peter; Yu, Aibing

    2016-04-01

    Mathematical modeling is a cost-effective method to understand internal state and predict performance of ironmaking blast furnace (BF) for improving productivity and maintaining stability. In the past studies, both slot and sector geometries were used for BF modeling. In this paper, a mathematical model is described for simulating the complex behaviors of solid, gas and liquid multiphase flow, heat and mass transfers, and chemical reactions in a BF. Then the model is used to compare different model configurations, viz. slot and sector geometries by investigating their effects on predicted behaviors, in terms of two aspects: (i) internal state including cohesive zone, velocity, temperature, components concentration, reduction degree, gas utilization, and (ii) performance indicators including liquid output at the bottom and gas utilization rate at the furnace top. The comparisons show that on one hand, predictions of internal state of the furnace such as fluid flow and thermo-chemical phenomena using the slot and sector geometries are qualitatively comparable but quantitatively different. Both sector and slot geometries give a similar cohesive zone shape but the sector geometry gives a higher cohesive zone near the wall and faster reduction. On the other hand, the two geometries can produce similar performance indicators including gas utilization at the furnace top and liquid output at the bottom. Such a study is useful in selecting geometry for numerically examining BF operation with respect to different needs.

  7. Moving KML geometry elements within Google Earth

    Science.gov (United States)

    Zhu, Liang-feng; Wang, Xi-feng; Pan, Xin

    2014-11-01

    During the process of modeling and visualizing geospatial information on the Google Earth virtual globe, there is an increasing demand to carry out such operations as moving geospatial objects defined by KML geometry elements horizontally or vertically. Due to the absence of the functionality and user interface for performing the moving transformation, it is either hard or impossible to interactively move multiple geospatial objects only using the existing Google Earth desktop application, especially when the data sets are in large volume. In this paper, we present a general framework and associated implementation methods for moving multiple KML geometry elements within Google Earth. In our proposed framework, we first load KML objects into the Google Earth plug-in, and then extract KML geometry elements from the imported KML objects. Subsequently, we interactively control the movement distance along a specified orientation by employing a custom user interface, calculate the transformed geographic location for each KML geometry element, and adjust geographic coordinates of the points in each KML objects. And finally, transformed KML geometry elements can be displayed in Google Earth for 3D visualization and spatial analysis. A key advantage of the proposed framework is that it provides a simple, uniform and efficient user interface for moving multiple KML geometry elements within Google Earth. More importantly, the proposed framework and associated implementations can be conveniently integrated into other customizable Google Earth applications to support interactively visualizing and analyzing geospatial objects defined by KML geometry elements.

  8. Discrete quantum geometries and their effective dimension

    Energy Technology Data Exchange (ETDEWEB)

    Thuerigen, Johannes

    2015-07-02

    In several approaches towards a quantum theory of gravity, such as group field theory and loop quantum gravity, quantum states and histories of the geometric degrees of freedom turn out to be based on discrete spacetime. The most pressing issue is then how the smooth geometries of general relativity, expressed in terms of suitable geometric observables, arise from such discrete quantum geometries in some semiclassical and continuum limit. In this thesis I tackle the question of suitable observables focusing on the effective dimension of discrete quantum geometries. For this purpose I give a purely combinatorial description of the discrete structures which these geometries have support on. As a side topic, this allows to present an extension of group field theory to cover the combinatorially larger kinematical state space of loop quantum gravity. Moreover, I introduce a discrete calculus for fields on such fundamentally discrete geometries with a particular focus on the Laplacian. This permits to define the effective-dimension observables for quantum geometries. Analysing various classes of quantum geometries, I find as a general result that the spectral dimension is more sensitive to the underlying combinatorial structure than to the details of the additional geometric data thereon. Semiclassical states in loop quantum gravity approximate the classical geometries they are peaking on rather well and there are no indications for stronger quantum effects. On the other hand, in the context of a more general model of states which are superposition over a large number of complexes, based on analytic solutions, there is a flow of the spectral dimension from the topological dimension d on low energy scales to a real number between 0 and d on high energy scales. In the particular case of 1 these results allow to understand the quantum geometry as effectively fractal.

  9. Differential geometry and topology of curves

    CERN Document Server

    Animov, Yu

    2001-01-01

    Differential geometry is an actively developing area of modern mathematics. This volume presents a classical approach to the general topics of the geometry of curves, including the theory of curves in n-dimensional Euclidean space. The author investigates problems for special classes of curves and gives the working method used to obtain the conditions for closed polygonal curves. The proof of the Bakel-Werner theorem in conditions of boundedness for curves with periodic curvature and torsion is also presented. This volume also highlights the contributions made by great geometers. past and present, to differential geometry and the topology of curves.

  10. A Gyrovector Space Approach to Hyperbolic Geometry

    CERN Document Server

    Ungar, Abraham

    2009-01-01

    The mere mention of hyperbolic geometry is enough to strike fear in the heart of the undergraduate mathematics and physics student. Some regard themselves as excluded from the profound insights of hyperbolic geometry so that this enormous portion of human achievement is a closed door to them. The mission of this book is to open that door by making the hyperbolic geometry of Bolyai and Lobachevsky, as well as the special relativity theory of Einstein that it regulates, accessible to a wider audience in terms of novel analogies that the modern and unknown share with the classical and familiar. T

  11. A proposal of foundation of spacetime geometry

    CERN Document Server

    Tresguerres, Romualdo

    2014-01-01

    A common approach to metric-affine, local Poincar\\'e, special-relativistic and Galilei spacetime geometry is developed. Starting from an affine composite bundle, we introduce local reference frames and their evolution along worldlines and we study both, absolute and relative simultaneity postulates, giving rise to alternative concepts of spacetime. In particular, the construction of the Minkowski metric, and its required invariance, allows either to reorganize the original affine bundle as a metric-affine geometry with explicit Lorentz symmetry, or to restrict it to a Poincar\\'e geometry, both of them constituting the background of a wide class of gauge theories of gravity.

  12. Digital and discrete geometry theory and algorithms

    CERN Document Server

    Chen, Li

    2014-01-01

    This book provides comprehensive coverage of the modern methods for geometric problems in the computing sciences. It also covers concurrent topics in data sciences including geometric processing, manifold learning, Google search, cloud data, and R-tree for wireless networks and BigData.The author investigates digital geometry and its related constructive methods in discrete geometry, offering detailed methods and algorithms. The book is divided into five sections: basic geometry; digital curves, surfaces and manifolds; discretely represented objects; geometric computation and processing; and a

  13. Information geometry near randomness and near independence

    CERN Document Server

    Arwini, Khadiga A

    2008-01-01

    This volume will be useful to practising scientists and students working in the application of statistical models to real materials or to processes with perturbations of a Poisson process, a uniform process, or a state of independence for a bivariate process. We use information geometry to provide a common differential geometric framework for a wide range of illustrative applications including amino acid sequence spacings in protein chains, cryptology studies, clustering of communications and galaxies, cosmological voids, coupled spatial statistics in stochastic fibre networks and stochastic porous media, quantum chaology. Introduction sections are provided to mathematical statistics, differential geometry and the information geometry of spaces of probability density functions.

  14. Wormhole inspired by non-commutative geometry

    Energy Technology Data Exchange (ETDEWEB)

    Rahaman, Farook, E-mail: rahaman@iucaa.ernet.in [Department of Mathematics, Jadavpur University, Kolkata 700032, West Bengal (India); Karmakar, Sreya, E-mail: sreya.karmakar@gmail.com [Department of Physics, Calcutta Institute of Engineering and Management, Kolkata 700040, West Bengal (India); Karar, Indrani, E-mail: indrani.karar08@gmail.com [Department of Mathematics, Saroj Mohan Institute of Technology, Guptipara, West Bengal (India); Ray, Saibal, E-mail: saibal@iucaa.ernet.in [Department of Physics, Government College of Engineering & Ceramic Technology, Kolkata 700010, West Bengal (India)

    2015-06-30

    In the present Letter we search for a new wormhole solution inspired by noncommutative geometry with the additional condition of allowing conformal Killing vectors (CKV). A special aspect of noncommutative geometry is that it replaces point-like structures of gravitational sources with smeared objects under Gaussian distribution. However, the purpose of this letter is to obtain wormhole solutions with noncommutative geometry as a background where we consider a point-like structure of gravitational object without smearing effect. It is found through this investigation that wormhole solutions exist in this Lorentzian distribution with viable physical properties.

  15. Wormhole inspired by non-commutative geometry

    Directory of Open Access Journals (Sweden)

    Farook Rahaman

    2015-06-01

    Full Text Available In the present Letter we search for a new wormhole solution inspired by noncommutative geometry with the additional condition of allowing conformal Killing vectors (CKV. A special aspect of noncommutative geometry is that it replaces point-like structures of gravitational sources with smeared objects under Gaussian distribution. However, the purpose of this letter is to obtain wormhole solutions with noncommutative geometry as a background where we consider a point-like structure of gravitational object without smearing effect. It is found through this investigation that wormhole solutions exist in this Lorentzian distribution with viable physical properties.

  16. On Discrete Differential Geometry in Twistor Space

    OpenAIRE

    2011-01-01

    In this paper we introduce a discrete integrable system generalizing the discrete (real) cross-ratio system in $S^4$ to complex values of a generalized cross-ratio by considering $S^4$ as a real section of the complex Pl\\"ucker quadric, realized as the space of two-spheres in $S^4.$ We develop the geometry of the Pl\\"ucker quadric by examining the novel contact properties of two-spheres in $S^4,$ generalizing classical Lie geometry in $S^3.$ Discrete differential geometry aims to develop disc...

  17. Fractal geometry mathematical foundations and applications

    CERN Document Server

    Falconer, Kenneth

    2013-01-01

    The seminal text on fractal geometry for students and researchers: extensively revised and updated with new material, notes and references that reflect recent directions. Interest in fractal geometry continues to grow rapidly, both as a subject that is fascinating in its own right and as a concept that is central to many areas of mathematics, science and scientific research. Since its initial publication in 1990 Fractal Geometry: Mathematical Foundations and Applications has become a seminal text on the mathematics of fractals.  The book introduces and develops the general theory and applica

  18. Fault geometry and earthquake mechanics

    Directory of Open Access Journals (Sweden)

    D. J. Andrews

    1994-06-01

    Full Text Available Earthquake mechanics may be determined by the geometry of a fault system. Slip on a fractal branching fault surface can explain: 1 regeneration of stress irregularities in an earthquake; 2 the concentration of stress drop in an earthquake into asperities; 3 starting and stopping of earthquake slip at fault junctions, and 4 self-similar scaling of earthquakes. Slip at fault junctions provides a natural realization of barrier and asperity models without appealing to variations of fault strength. Fault systems are observed to have a branching fractal structure, and slip may occur at many fault junctions in an earthquake. Consider the mechanics of slip at one fault junction. In order to avoid a stress singularity of order 1/r, an intersection of faults must be a triple junction and the Burgers vectors on the three fault segments at the junction must sum to zero. In other words, to lowest order the deformation consists of rigid block displacement, which ensures that the local stress due to the dislocations is zero. The elastic dislocation solution, however, ignores the fact that the configuration of the blocks changes at the scale of the displacement. A volume change occurs at the junction; either a void opens or intense local deformation is required to avoid material overlap. The volume change is proportional to the product of the slip increment and the total slip since the formation of the junction. Energy absorbed at the junction, equal to confining pressure times the volume change, is not large enongh to prevent slip at a new junction. The ratio of energy absorbed at a new junction to elastic energy released in an earthquake is no larger than P/µ where P is confining pressure and µ is the shear modulus. At a depth of 10 km this dimensionless ratio has th value P/µ= 0.01. As slip accumulates at a fault junction in a number of earthquakes, the fault segments are displaced such that they no longer meet at a single point. For this reason the

  19. New Mn(II, Ni(II, Cd(II, Pb(II complexes with 2-methylbenzimidazole and other ligands. Synthesis, spectroscopic characterization, crystal structure, magnetic susceptibility and biological activity studies

    Directory of Open Access Journals (Sweden)

    Shayma A. Shaker

    2016-11-01

    Full Text Available Synthesis and characterization of Mn(II, Ni(II, Cd(II and Pb(II mixed ligand complexes of 2-methylbenzimidazole with other ligands have been reported. The structure of the ligands and their complexes was investigated using elemental analysis, IR, UV–Vis, (1H, 13C NMR spectroscopy, molar conductivity and magnetic susceptibility measurements. In all the studies of complexes, the 2-methylbenzimidazole behaves as a neutral monodentate ligand which is coordinated with the metal ions through the N atom. While benzotriazole behaves as a neutral bidentate ligand which is coordinated with the Ni(II ion through the two N atoms. Moreover, the N-acetylglycine behaves as a bidentate ligand which is coordinated with the Mn(II, Ni(II and Pb(II ions through the N atom and the terminal carboxyl oxygen atom. The magnetic and spectral data indicate the tetrahedral geometry for Mn(II complex, irregular tetrahedral geometry for Pb(II complex and octahedral geometry for Ni(II complex. The X-ray single crystal diffraction method was used to confirm a centrosymmetric dinuclear Cd(II complex as each two metal ions are linked by a pair of thiocyanate N = S bridge. Two 2-methylbenzimidazole N-atom donors and one terminal thiocyanate N atom complete a highly distorted square pyramid geometry around the Cd atom. Besides, different cell types were used to determine the inhibitory effect of Mn(II, Ni(II, Cd(II and Pb(II complexes on cell growth using MTT assay. Cd(II complex showed cytotoxic effect on various types of cancer cell lines with different EC50 values.

  20. Calculus of Elementary Functions, Part II. Student Text. Revised Edition.

    Science.gov (United States)

    Herriot, Sarah T.; And Others

    This course is intended for students who have a thorough knowledge of college preparatory mathematics, including algebra, axiomatic geometry, trigonometry, and analytic geometry. This text, Part II, contains material designed to follow Part I. Chapters included in this text are: (6) Derivatives of Exponential and Related Functions; (7) Area and…